From aaad2b0c757f3e6e02552cb0bdcd91a5ec0d6305 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Wed, 23 Apr 2008 16:39:43 +0200
Subject: HID: fix report descriptor handling for MS Wireless model 1028

Fix a typo in report descriptor fixup, which results in improper
substitution and leaving old value in place.

Reported-by: Juha Motorsportcom <juha_motorsportcom@luukku.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-quirks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 28ddc3fdd3d..8d2bc93f816 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -1113,7 +1113,7 @@ static void usbhid_fixup_microsoft_descriptor(unsigned char *rdesc, int rsize)
 			 && rdesc[557] == 0x19
 			 && rdesc[559] == 0x29) {
 		printk(KERN_INFO "Fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n");
-		rdesc[284] = rdesc[304] = rdesc[558] = 0x35;
+		rdesc[284] = rdesc[304] = rdesc[557] = 0x35;
 		rdesc[352] = 0x36;
 		rdesc[286] = rdesc[355] = 0x46;
 		rdesc[306] = rdesc[559] = 0x45;
-- 
cgit v1.2.3


From 91949d64548ead31df51c9fb6f7201ca8ffc9b51 Mon Sep 17 00:00:00 2001
From: Alexander Belyakov <abelyako@mail.ru>
Date: Sun, 4 May 2008 14:32:58 +0400
Subject: [MTD] [NOR] Remove cfi_cmdset_0001.c erase suspend fixup typo

Fix typo in erase suspend while write fixup code leading to compile time
error if CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE was defined.

drivers/mtd/chips/cfi_cmdset_0001.c: In function 'fixup_intel_strataflash':
drivers/mtd/chips/cfi_cmdset_0001.c:212: error: 'struct cfi_pri_amdstd' has no member named 'SuspendCmdSupport'

Signed-off-by: Alexander Belyakov <abelyako@googlemail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/cfi_cmdset_0001.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index fcd1aeccdf9..235830b9e99 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -204,7 +204,7 @@ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
-	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
 
 	printk(KERN_WARNING "cfi_cmdset_0001: Suspend "
 	                    "erase on write disabled.\n");
-- 
cgit v1.2.3


From deb1a5f1134e7da0e3dacd37b5d32b7fe0600a7f Mon Sep 17 00:00:00 2001
From: Nate Case <ncase@xes-inc.com>
Date: Tue, 13 May 2008 14:45:29 -0500
Subject: [MTD] [NOR] Support for M50FLW080A and M50FLW080B

Add support for M50FLW080A and M50FLW080B revisions of LPC flash
devices.

Signed-off-by: Aaron Lindner <alindner@xes-inc.com>
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/cfi_cmdset_0001.c |  4 ++++
 drivers/mtd/chips/jedec_probe.c     | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 235830b9e99..cc6b7bb6de0 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -50,6 +50,8 @@
 #define I82802AC	0x00ac
 #define MANUFACTURER_ST         0x0020
 #define M50LPW080       0x002F
+#define M50FLW080A	0x0080
+#define M50FLW080B	0x0081
 #define AT49BV640D	0x02de
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
@@ -301,6 +303,8 @@ static struct cfi_fixup jedec_fixup_table[] = {
 	{ MANUFACTURER_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
 	{ MANUFACTURER_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
 	{ MANUFACTURER_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
+	{ MANUFACTURER_ST,    M50FLW080A, fixup_use_fwh_lock, NULL, },
+	{ MANUFACTURER_ST,    M50FLW080B, fixup_use_fwh_lock, NULL, },
 	{ 0, 0, NULL, NULL }
 };
 static struct cfi_fixup fixup_table[] = {
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index aa07575eb28..99f9ed21f66 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -141,6 +141,8 @@
 #define M50FW080	0x002D
 #define M50FW016	0x002E
 #define M50LPW080       0x002F
+#define M50FLW080A	0x0080
+#define M50FLW080B	0x0081
 
 /* SST */
 #define SST29EE020	0x0010
@@ -1590,6 +1592,36 @@ static const struct amd_flash_info jedec_table[] = {
 		.nr_regions	= 1,
 		.regions	= {
 			ERASEINFO(0x10000,16),
+		},
+	}, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50FLW080A,
+		.name		= "ST M50FLW080A",
+		.devtypes	= CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_UNNECESSARY,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_INTEL_EXT,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x10000,13),
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x1000,16),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50FLW080B,
+		.name		= "ST M50FLW080B",
+		.devtypes	= CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_UNNECESSARY,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_INTEL_EXT,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x10000,13),
+			ERASEINFO(0x1000,16),
 		}
 	}, {
 		.mfr_id		= MANUFACTURER_TOSHIBA,
-- 
cgit v1.2.3


From a953e4597abd51b74c99e0e3b7074532a60fd031 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:12 +0200
Subject: sched: replace MAX_NUMNODES with nr_node_ids in kernel/sched.c

  * Replace usages of MAX_NUMNODES with nr_node_ids in kernel/sched.c,
    where appropriate.  This saves some allocated space as well as many
    wasted cycles going through node entries that are non-existent.

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index cfa222a9153..1ed8011db82 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6879,9 +6879,9 @@ static int find_next_best_node(int node, nodemask_t *used_nodes)
 
 	min_val = INT_MAX;
 
-	for (i = 0; i < MAX_NUMNODES; i++) {
+	for (i = 0; i < nr_node_ids; i++) {
 		/* Start at @node */
-		n = (node + i) % MAX_NUMNODES;
+		n = (node + i) % nr_node_ids;
 
 		if (!nr_cpus_node(n))
 			continue;
@@ -7075,7 +7075,7 @@ static void free_sched_groups(const cpumask_t *cpu_map, cpumask_t *nodemask)
 		if (!sched_group_nodes)
 			continue;
 
-		for (i = 0; i < MAX_NUMNODES; i++) {
+		for (i = 0; i < nr_node_ids; i++) {
 			struct sched_group *oldsg, *sg = sched_group_nodes[i];
 
 			*nodemask = node_to_cpumask(i);
@@ -7263,7 +7263,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 	/*
 	 * Allocate the per-node list of sched groups
 	 */
-	sched_group_nodes = kcalloc(MAX_NUMNODES, sizeof(struct sched_group *),
+	sched_group_nodes = kcalloc(nr_node_ids, sizeof(struct sched_group *),
 				    GFP_KERNEL);
 	if (!sched_group_nodes) {
 		printk(KERN_WARNING "Can not alloc sched group node list\n");
@@ -7407,7 +7407,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 #endif
 
 	/* Set up physical groups */
-	for (i = 0; i < MAX_NUMNODES; i++) {
+	for (i = 0; i < nr_node_ids; i++) {
 		SCHED_CPUMASK_VAR(nodemask, allmasks);
 		SCHED_CPUMASK_VAR(send_covered, allmasks);
 
@@ -7431,7 +7431,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 					send_covered, tmpmask);
 	}
 
-	for (i = 0; i < MAX_NUMNODES; i++) {
+	for (i = 0; i < nr_node_ids; i++) {
 		/* Set up node groups */
 		struct sched_group *sg, *prev;
 		SCHED_CPUMASK_VAR(nodemask, allmasks);
@@ -7470,9 +7470,9 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 		cpus_or(*covered, *covered, *nodemask);
 		prev = sg;
 
-		for (j = 0; j < MAX_NUMNODES; j++) {
+		for (j = 0; j < nr_node_ids; j++) {
 			SCHED_CPUMASK_VAR(notcovered, allmasks);
-			int n = (i + j) % MAX_NUMNODES;
+			int n = (i + j) % nr_node_ids;
 			node_to_cpumask_ptr(pnodemask, n);
 
 			cpus_complement(*notcovered, *covered);
@@ -7525,7 +7525,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 	}
 
 #ifdef CONFIG_NUMA
-	for (i = 0; i < MAX_NUMNODES; i++)
+	for (i = 0; i < nr_node_ids; i++)
 		init_numa_sched_groups_power(sched_group_nodes[i]);
 
 	if (sd_allnodes) {
-- 
cgit v1.2.3


From 143aa5c53bd3895d42d7c08753fe58293988a69d Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: cpu: change some globals to statics in drivers/base/cpu.c v2

This patch makes the following needlessly global code static:
- attr_online_map
- attr_possible_map
- attr_present_map

- cpu_state_attr [v2]

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/base/cpu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index e38dfed41d8..5000402ae09 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -119,14 +119,14 @@ static ssize_t print_cpus_##type(struct sysdev_class *class, char *buf)	\
 {									\
 	return print_cpus_map(buf, &cpu_##type##_map);			\
 }									\
-struct sysdev_class_attribute attr_##type##_map = 			\
+static struct sysdev_class_attribute attr_##type##_map = 		\
 	_SYSDEV_CLASS_ATTR(type, 0444, print_cpus_##type, NULL)
 
 print_cpus_func(online);
 print_cpus_func(possible);
 print_cpus_func(present);
 
-struct sysdev_class_attribute *cpu_state_attr[] = {
+static struct sysdev_class_attribute *cpu_state_attr[] = {
 	&attr_online_map,
 	&attr_possible_map,
 	&attr_present_map,
-- 
cgit v1.2.3


From 41df0d61c266998b8049df7fec119cd518a43aa1 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: x86: Add performance variants of cpumask operators

  * Increase performance for systems with large count NR_CPUS by limiting
    the range of the cpumask operators that loop over the bits in a cpumask_t
    variable.  This removes a large amount of wasted cpu cycles.

  * Add performance variants of the cpumask operators:

    int cpus_weight_nr(mask)	     Same using nr_cpu_ids instead of NR_CPUS
    int first_cpu_nr(mask)	     Number lowest set bit, or nr_cpu_ids
    int next_cpu_nr(cpu, mask)	     Next cpu past 'cpu', or nr_cpu_ids
    for_each_cpu_mask_nr(cpu, mask)  for-loop cpu over mask using nr_cpu_ids

  * Modify following to use performance variants:

    #define num_online_cpus()	cpus_weight_nr(cpu_online_map)
    #define num_possible_cpus()	cpus_weight_nr(cpu_possible_map)
    #define num_present_cpus()	cpus_weight_nr(cpu_present_map)

    #define for_each_possible_cpu(cpu) for_each_cpu_mask_nr((cpu), ...)
    #define for_each_online_cpu(cpu)   for_each_cpu_mask_nr((cpu), ...)
    #define for_each_present_cpu(cpu)  for_each_cpu_mask_nr((cpu), ...)

  * Comment added to include/linux/cpumask.h:

    Note: The alternate operations with the suffix "_nr" are used
	  to limit the range of the loop to nr_cpu_ids instead of
	  NR_CPUS when NR_CPUS > 64 for performance reasons.
	  If NR_CPUS is <= 64 then most assembler bitmask
	  operators execute faster with a constant range, so
	  the operator will continue to use NR_CPUS.

	  Another consideration is that nr_cpu_ids is initialized
	  to NR_CPUS and isn't lowered until the possible cpus are
	  discovered (including any disabled cpus).  So early uses
	  will span the entire range of NR_CPUS.

    (The net effect is that for systems with 64 or less CPU's there are no
     functional changes.)

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/cpumask.h | 92 +++++++++++++++++++++++++++++++++----------------
 lib/cpumask.c           |  9 +++++
 2 files changed, 71 insertions(+), 30 deletions(-)

diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 5df3db58fcc..b49472d1af8 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -17,6 +17,20 @@
  * For details of cpus_onto(), see bitmap_onto in lib/bitmap.c.
  * For details of cpus_fold(), see bitmap_fold in lib/bitmap.c.
  *
+ * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+ * Note: The alternate operations with the suffix "_nr" are used
+ *       to limit the range of the loop to nr_cpu_ids instead of
+ *       NR_CPUS when NR_CPUS > 64 for performance reasons.
+ *       If NR_CPUS is <= 64 then most assembler bitmask
+ *       operators execute faster with a constant range, so
+ *       the operator will continue to use NR_CPUS.
+ *
+ *       Another consideration is that nr_cpu_ids is initialized
+ *       to NR_CPUS and isn't lowered until the possible cpus are
+ *       discovered (including any disabled cpus).  So early uses
+ *       will span the entire range of NR_CPUS.
+ * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+ *
  * The available cpumask operations are:
  *
  * void cpu_set(cpu, mask)		turn on bit 'cpu' in mask
@@ -38,12 +52,14 @@
  * int cpus_empty(mask)			Is mask empty (no bits sets)?
  * int cpus_full(mask)			Is mask full (all bits sets)?
  * int cpus_weight(mask)		Hamming weigh - number of set bits
+ * int cpus_weight_nr(mask)		Same using nr_cpu_ids instead of NR_CPUS
  *
  * void cpus_shift_right(dst, src, n)	Shift right
  * void cpus_shift_left(dst, src, n)	Shift left
  *
  * int first_cpu(mask)			Number lowest set bit, or NR_CPUS
  * int next_cpu(cpu, mask)		Next cpu past 'cpu', or NR_CPUS
+ * int next_cpu_nr(cpu, mask)		Next cpu past 'cpu', or nr_cpu_ids
  *
  * cpumask_t cpumask_of_cpu(cpu)	Return cpumask with bit 'cpu' set
  * CPU_MASK_ALL				Initializer - all bits set
@@ -59,7 +75,8 @@
  * void cpus_onto(dst, orig, relmap)	*dst = orig relative to relmap
  * void cpus_fold(dst, orig, sz)	dst bits = orig bits mod sz
  *
- * for_each_cpu_mask(cpu, mask)		for-loop cpu over mask
+ * for_each_cpu_mask(cpu, mask)		for-loop cpu over mask using NR_CPUS
+ * for_each_cpu_mask_nr(cpu, mask)	for-loop cpu over mask using nr_cpu_ids
  *
  * int num_online_cpus()		Number of online CPUs
  * int num_possible_cpus()		Number of all possible CPUs
@@ -216,15 +233,6 @@ static inline void __cpus_shift_left(cpumask_t *dstp,
 	bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
 }
 
-#ifdef CONFIG_SMP
-int __first_cpu(const cpumask_t *srcp);
-#define first_cpu(src) __first_cpu(&(src))
-int __next_cpu(int n, const cpumask_t *srcp);
-#define next_cpu(n, src) __next_cpu((n), &(src))
-#else
-#define first_cpu(src)		({ (void)(src); 0; })
-#define next_cpu(n, src)	({ (void)(src); 1; })
-#endif
 
 #ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
 extern cpumask_t *cpumask_of_cpu_map;
@@ -343,15 +351,48 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp,
 	bitmap_fold(dstp->bits, origp->bits, sz, nbits);
 }
 
-#if NR_CPUS > 1
+#if NR_CPUS == 1
+
+#define nr_cpu_ids		1
+#define first_cpu(src)		({ (void)(src); 0; })
+#define next_cpu(n, src)	({ (void)(src); 1; })
+#define any_online_cpu(mask)	0
+#define for_each_cpu_mask(cpu, mask)	\
+	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
+
+#else /* NR_CPUS > 1 */
+
+extern int nr_cpu_ids;
+int __first_cpu(const cpumask_t *srcp);
+int __next_cpu(int n, const cpumask_t *srcp);
+int __any_online_cpu(const cpumask_t *mask);
+
+#define first_cpu(src)		__first_cpu(&(src))
+#define next_cpu(n, src)	__next_cpu((n), &(src))
+#define any_online_cpu(mask) __any_online_cpu(&(mask))
 #define for_each_cpu_mask(cpu, mask)		\
 	for ((cpu) = first_cpu(mask);		\
 		(cpu) < NR_CPUS;		\
 		(cpu) = next_cpu((cpu), (mask)))
-#else /* NR_CPUS == 1 */
-#define for_each_cpu_mask(cpu, mask)		\
-	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
-#endif /* NR_CPUS */
+#endif
+
+#if NR_CPUS <= 64
+
+#define next_cpu_nr(n, src)		next_cpu(n, src)
+#define cpus_weight_nr(cpumask)		cpus_weight(cpumask)
+#define for_each_cpu_mask_nr(cpu, mask)	for_each_cpu_mask(cpu, mask)
+
+#else /* NR_CPUS > 64 */
+
+int __next_cpu_nr(int n, const cpumask_t *srcp);
+#define next_cpu_nr(n, src)	__next_cpu_nr((n), &(src))
+#define cpus_weight_nr(cpumask)	__cpus_weight(&(cpumask), nr_cpu_ids)
+#define for_each_cpu_mask_nr(cpu, mask)		\
+	for ((cpu) = first_cpu(mask);		\
+		(cpu) < nr_cpu_ids;		\
+		(cpu) = next_cpu_nr((cpu), (mask)))
+
+#endif /* NR_CPUS > 64 */
 
 /*
  * The following particular system cpumasks and operations manage
@@ -414,9 +455,9 @@ extern cpumask_t cpu_online_map;
 extern cpumask_t cpu_present_map;
 
 #if NR_CPUS > 1
-#define num_online_cpus()	cpus_weight(cpu_online_map)
-#define num_possible_cpus()	cpus_weight(cpu_possible_map)
-#define num_present_cpus()	cpus_weight(cpu_present_map)
+#define num_online_cpus()	cpus_weight_nr(cpu_online_map)
+#define num_possible_cpus()	cpus_weight_nr(cpu_possible_map)
+#define num_present_cpus()	cpus_weight_nr(cpu_present_map)
 #define cpu_online(cpu)		cpu_isset((cpu), cpu_online_map)
 #define cpu_possible(cpu)	cpu_isset((cpu), cpu_possible_map)
 #define cpu_present(cpu)	cpu_isset((cpu), cpu_present_map)
@@ -431,17 +472,8 @@ extern cpumask_t cpu_present_map;
 
 #define cpu_is_offline(cpu)	unlikely(!cpu_online(cpu))
 
-#ifdef CONFIG_SMP
-extern int nr_cpu_ids;
-#define any_online_cpu(mask) __any_online_cpu(&(mask))
-int __any_online_cpu(const cpumask_t *mask);
-#else
-#define nr_cpu_ids			1
-#define any_online_cpu(mask)		0
-#endif
-
-#define for_each_possible_cpu(cpu)  for_each_cpu_mask((cpu), cpu_possible_map)
-#define for_each_online_cpu(cpu)  for_each_cpu_mask((cpu), cpu_online_map)
-#define for_each_present_cpu(cpu) for_each_cpu_mask((cpu), cpu_present_map)
+#define for_each_possible_cpu(cpu) for_each_cpu_mask_nr((cpu), cpu_possible_map)
+#define for_each_online_cpu(cpu)   for_each_cpu_mask_nr((cpu), cpu_online_map)
+#define for_each_present_cpu(cpu)  for_each_cpu_mask_nr((cpu), cpu_present_map)
 
 #endif /* __LINUX_CPUMASK_H */
diff --git a/lib/cpumask.c b/lib/cpumask.c
index bb4f76d3c3e..5f97dc25ef9 100644
--- a/lib/cpumask.c
+++ b/lib/cpumask.c
@@ -15,6 +15,15 @@ int __next_cpu(int n, const cpumask_t *srcp)
 }
 EXPORT_SYMBOL(__next_cpu);
 
+#if NR_CPUS > 64
+int __next_cpu_nr(int n, const cpumask_t *srcp)
+{
+	return min_t(int, nr_cpu_ids,
+				find_next_bit(srcp->bits, nr_cpu_ids, n+1));
+}
+EXPORT_SYMBOL(__next_cpu_nr);
+#endif
+
 int __any_online_cpu(const cpumask_t *mask)
 {
 	int cpu;
-- 
cgit v1.2.3


From 141ad0688adb53094d6f75b39b4b3b0625de0e07 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: acpi: use performance variant for_each_cpu_mask_nr

Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/acpi/processor_throttling.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index bb06738860c..28509fbba6f 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -1013,7 +1013,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 	 * affected cpu in order to get one proper T-state.
 	 * The notifier event is THROTTLING_PRECHANGE.
 	 */
-	for_each_cpu_mask(i, online_throttling_cpus) {
+	for_each_cpu_mask_nr(i, online_throttling_cpus) {
 		t_state.cpu = i;
 		acpi_processor_throttling_notifier(THROTTLING_PRECHANGE,
 							&t_state);
@@ -1034,7 +1034,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 		 * it is necessary to set T-state for every affected
 		 * cpus.
 		 */
-		for_each_cpu_mask(i, online_throttling_cpus) {
+		for_each_cpu_mask_nr(i, online_throttling_cpus) {
 			match_pr = processors[i];
 			/*
 			 * If the pointer is invalid, we will report the
@@ -1068,7 +1068,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 	 * affected cpu to update the T-states.
 	 * The notifier event is THROTTLING_POSTCHANGE
 	 */
-	for_each_cpu_mask(i, online_throttling_cpus) {
+	for_each_cpu_mask_nr(i, online_throttling_cpus) {
 		t_state.cpu = i;
 		acpi_processor_throttling_notifier(THROTTLING_POSTCHANGE,
 							&t_state);
-- 
cgit v1.2.3


From 068b12772a64c2440ef2f64ac5d780688c06576f Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: cpufreq: use performance variant for_each_cpu_mask_nr

Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/cpufreq/cpufreq.c              | 14 +++++++-------
 drivers/cpufreq/cpufreq_conservative.c |  2 +-
 drivers/cpufreq/cpufreq_ondemand.c     |  4 ++--
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 7fce038fa57..4937f2f97d8 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -589,7 +589,7 @@ static ssize_t show_cpus(cpumask_t mask, char *buf)
 	ssize_t i = 0;
 	unsigned int cpu;
 
-	for_each_cpu_mask(cpu, mask) {
+	for_each_cpu_mask_nr(cpu, mask) {
 		if (i)
 			i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), " ");
 		i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u", cpu);
@@ -835,7 +835,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	}
 #endif
 
-	for_each_cpu_mask(j, policy->cpus) {
+	for_each_cpu_mask_nr(j, policy->cpus) {
 		if (cpu == j)
 			continue;
 
@@ -898,14 +898,14 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	}
 
 	spin_lock_irqsave(&cpufreq_driver_lock, flags);
-	for_each_cpu_mask(j, policy->cpus) {
+	for_each_cpu_mask_nr(j, policy->cpus) {
 		cpufreq_cpu_data[j] = policy;
 		per_cpu(policy_cpu, j) = policy->cpu;
 	}
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
 	/* symlink affected CPUs */
-	for_each_cpu_mask(j, policy->cpus) {
+	for_each_cpu_mask_nr(j, policy->cpus) {
 		if (j == cpu)
 			continue;
 		if (!cpu_online(j))
@@ -945,7 +945,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 
 err_out_unregister:
 	spin_lock_irqsave(&cpufreq_driver_lock, flags);
-	for_each_cpu_mask(j, policy->cpus)
+	for_each_cpu_mask_nr(j, policy->cpus)
 		cpufreq_cpu_data[j] = NULL;
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
@@ -1028,7 +1028,7 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	 * links afterwards.
 	 */
 	if (unlikely(cpus_weight(data->cpus) > 1)) {
-		for_each_cpu_mask(j, data->cpus) {
+		for_each_cpu_mask_nr(j, data->cpus) {
 			if (j == cpu)
 				continue;
 			cpufreq_cpu_data[j] = NULL;
@@ -1038,7 +1038,7 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev)
 	spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
 	if (unlikely(cpus_weight(data->cpus) > 1)) {
-		for_each_cpu_mask(j, data->cpus) {
+		for_each_cpu_mask_nr(j, data->cpus) {
 			if (j == cpu)
 				continue;
 			dprintk("removing link for cpu %u\n", j);
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 5d3a04ba6ad..fe565ee4375 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -497,7 +497,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 			return rc;
 		}
 
-		for_each_cpu_mask(j, policy->cpus) {
+		for_each_cpu_mask_nr(j, policy->cpus) {
 			struct cpu_dbs_info_s *j_dbs_info;
 			j_dbs_info = &per_cpu(cpu_dbs_info, j);
 			j_dbs_info->cur_policy = policy;
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index d2af20dda38..33855cb3cf1 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -367,7 +367,7 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
 
 	/* Get Idle Time */
 	idle_ticks = UINT_MAX;
-	for_each_cpu_mask(j, policy->cpus) {
+	for_each_cpu_mask_nr(j, policy->cpus) {
 		cputime64_t total_idle_ticks;
 		unsigned int tmp_idle_ticks;
 		struct cpu_dbs_info_s *j_dbs_info;
@@ -521,7 +521,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 			return rc;
 		}
 
-		for_each_cpu_mask(j, policy->cpus) {
+		for_each_cpu_mask_nr(j, policy->cpus) {
 			struct cpu_dbs_info_s *j_dbs_info;
 			j_dbs_info = &per_cpu(cpu_dbs_info, j);
 			j_dbs_info->cur_policy = policy;
-- 
cgit v1.2.3


From 363ab6f1424cdea63e5d182312d60e19077b892a Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: core: use performance variant for_each_cpu_mask_nr

Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/cpu.c        |  2 +-
 kernel/rcuclassic.c |  2 +-
 kernel/rcupreempt.c | 10 +++++-----
 kernel/sched.c      | 36 ++++++++++++++++++------------------
 kernel/sched_fair.c |  2 +-
 kernel/sched_rt.c   |  6 +++---
 kernel/taskstats.c  |  4 ++--
 kernel/workqueue.c  |  6 +++---
 8 files changed, 34 insertions(+), 34 deletions(-)

diff --git a/kernel/cpu.c b/kernel/cpu.c
index c77bc3a1c72..50ae922c602 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -390,7 +390,7 @@ void __ref enable_nonboot_cpus(void)
 		goto out;
 
 	printk("Enabling non-boot CPUs ...\n");
-	for_each_cpu_mask(cpu, frozen_cpus) {
+	for_each_cpu_mask_nr(cpu, frozen_cpus) {
 		error = _cpu_up(cpu, 1);
 		if (!error) {
 			printk("CPU%d is up\n", cpu);
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index f4ffbd0f306..251358de70b 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -92,7 +92,7 @@ static void force_quiescent_state(struct rcu_data *rdp,
 		 */
 		cpumask = rcp->cpumask;
 		cpu_clear(rdp->cpu, cpumask);
-		for_each_cpu_mask(cpu, cpumask)
+		for_each_cpu_mask_nr(cpu, cpumask)
 			smp_send_reschedule(cpu);
 	}
 }
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index e1cdf196a51..18af270125c 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -657,7 +657,7 @@ rcu_try_flip_idle(void)
 
 	/* Now ask each CPU for acknowledgement of the flip. */
 
-	for_each_cpu_mask(cpu, rcu_cpu_online_map) {
+	for_each_cpu_mask_nr(cpu, rcu_cpu_online_map) {
 		per_cpu(rcu_flip_flag, cpu) = rcu_flipped;
 		dyntick_save_progress_counter(cpu);
 	}
@@ -675,7 +675,7 @@ rcu_try_flip_waitack(void)
 	int cpu;
 
 	RCU_TRACE_ME(rcupreempt_trace_try_flip_a1);
-	for_each_cpu_mask(cpu, rcu_cpu_online_map)
+	for_each_cpu_mask_nr(cpu, rcu_cpu_online_map)
 		if (rcu_try_flip_waitack_needed(cpu) &&
 		    per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) {
 			RCU_TRACE_ME(rcupreempt_trace_try_flip_ae1);
@@ -707,7 +707,7 @@ rcu_try_flip_waitzero(void)
 	/* Check to see if the sum of the "last" counters is zero. */
 
 	RCU_TRACE_ME(rcupreempt_trace_try_flip_z1);
-	for_each_cpu_mask(cpu, rcu_cpu_online_map)
+	for_each_cpu_mask_nr(cpu, rcu_cpu_online_map)
 		sum += RCU_DATA_CPU(cpu)->rcu_flipctr[lastidx];
 	if (sum != 0) {
 		RCU_TRACE_ME(rcupreempt_trace_try_flip_ze1);
@@ -722,7 +722,7 @@ rcu_try_flip_waitzero(void)
 	smp_mb();  /*  ^^^^^^^^^^^^ */
 
 	/* Call for a memory barrier from each CPU. */
-	for_each_cpu_mask(cpu, rcu_cpu_online_map) {
+	for_each_cpu_mask_nr(cpu, rcu_cpu_online_map) {
 		per_cpu(rcu_mb_flag, cpu) = rcu_mb_needed;
 		dyntick_save_progress_counter(cpu);
 	}
@@ -742,7 +742,7 @@ rcu_try_flip_waitmb(void)
 	int cpu;
 
 	RCU_TRACE_ME(rcupreempt_trace_try_flip_m1);
-	for_each_cpu_mask(cpu, rcu_cpu_online_map)
+	for_each_cpu_mask_nr(cpu, rcu_cpu_online_map)
 		if (rcu_try_flip_waitmb_needed(cpu) &&
 		    per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) {
 			RCU_TRACE_ME(rcupreempt_trace_try_flip_me1);
diff --git a/kernel/sched.c b/kernel/sched.c
index 1ed8011db82..814d6e17f1e 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2271,7 +2271,7 @@ find_idlest_group(struct sched_domain *sd, struct task_struct *p, int this_cpu)
 		/* Tally up the load of all CPUs in the group */
 		avg_load = 0;
 
-		for_each_cpu_mask(i, group->cpumask) {
+		for_each_cpu_mask_nr(i, group->cpumask) {
 			/* Bias balancing toward cpus of our domain */
 			if (local_group)
 				load = source_load(i, load_idx);
@@ -2313,7 +2313,7 @@ find_idlest_cpu(struct sched_group *group, struct task_struct *p, int this_cpu,
 	/* Traverse only the allowed CPUs */
 	cpus_and(*tmp, group->cpumask, p->cpus_allowed);
 
-	for_each_cpu_mask(i, *tmp) {
+	for_each_cpu_mask_nr(i, *tmp) {
 		load = weighted_cpuload(i);
 
 		if (load < min_load || (load == min_load && i == this_cpu)) {
@@ -3296,7 +3296,7 @@ find_busiest_group(struct sched_domain *sd, int this_cpu,
 		max_cpu_load = 0;
 		min_cpu_load = ~0UL;
 
-		for_each_cpu_mask(i, group->cpumask) {
+		for_each_cpu_mask_nr(i, group->cpumask) {
 			struct rq *rq;
 
 			if (!cpu_isset(i, *cpus))
@@ -3560,7 +3560,7 @@ find_busiest_queue(struct sched_group *group, enum cpu_idle_type idle,
 	unsigned long max_load = 0;
 	int i;
 
-	for_each_cpu_mask(i, group->cpumask) {
+	for_each_cpu_mask_nr(i, group->cpumask) {
 		unsigned long wl;
 
 		if (!cpu_isset(i, *cpus))
@@ -4100,7 +4100,7 @@ static void run_rebalance_domains(struct softirq_action *h)
 		int balance_cpu;
 
 		cpu_clear(this_cpu, cpus);
-		for_each_cpu_mask(balance_cpu, cpus) {
+		for_each_cpu_mask_nr(balance_cpu, cpus) {
 			/*
 			 * If this cpu gets work to do, stop the load balancing
 			 * work being done for other cpus. Next load
@@ -6832,7 +6832,7 @@ init_sched_build_groups(const cpumask_t *span, const cpumask_t *cpu_map,
 
 	cpus_clear(*covered);
 
-	for_each_cpu_mask(i, *span) {
+	for_each_cpu_mask_nr(i, *span) {
 		struct sched_group *sg;
 		int group = group_fn(i, cpu_map, &sg, tmpmask);
 		int j;
@@ -6843,7 +6843,7 @@ init_sched_build_groups(const cpumask_t *span, const cpumask_t *cpu_map,
 		cpus_clear(sg->cpumask);
 		sg->__cpu_power = 0;
 
-		for_each_cpu_mask(j, *span) {
+		for_each_cpu_mask_nr(j, *span) {
 			if (group_fn(j, cpu_map, NULL, tmpmask) != group)
 				continue;
 
@@ -7043,7 +7043,7 @@ static void init_numa_sched_groups_power(struct sched_group *group_head)
 	if (!sg)
 		return;
 	do {
-		for_each_cpu_mask(j, sg->cpumask) {
+		for_each_cpu_mask_nr(j, sg->cpumask) {
 			struct sched_domain *sd;
 
 			sd = &per_cpu(phys_domains, j);
@@ -7068,7 +7068,7 @@ static void free_sched_groups(const cpumask_t *cpu_map, cpumask_t *nodemask)
 {
 	int cpu, i;
 
-	for_each_cpu_mask(cpu, *cpu_map) {
+	for_each_cpu_mask_nr(cpu, *cpu_map) {
 		struct sched_group **sched_group_nodes
 			= sched_group_nodes_bycpu[cpu];
 
@@ -7302,7 +7302,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 	/*
 	 * Set up domains for cpus specified by the cpu_map.
 	 */
-	for_each_cpu_mask(i, *cpu_map) {
+	for_each_cpu_mask_nr(i, *cpu_map) {
 		struct sched_domain *sd = NULL, *p;
 		SCHED_CPUMASK_VAR(nodemask, allmasks);
 
@@ -7374,7 +7374,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 
 #ifdef CONFIG_SCHED_SMT
 	/* Set up CPU (sibling) groups */
-	for_each_cpu_mask(i, *cpu_map) {
+	for_each_cpu_mask_nr(i, *cpu_map) {
 		SCHED_CPUMASK_VAR(this_sibling_map, allmasks);
 		SCHED_CPUMASK_VAR(send_covered, allmasks);
 
@@ -7391,7 +7391,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 
 #ifdef CONFIG_SCHED_MC
 	/* Set up multi-core groups */
-	for_each_cpu_mask(i, *cpu_map) {
+	for_each_cpu_mask_nr(i, *cpu_map) {
 		SCHED_CPUMASK_VAR(this_core_map, allmasks);
 		SCHED_CPUMASK_VAR(send_covered, allmasks);
 
@@ -7458,7 +7458,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 			goto error;
 		}
 		sched_group_nodes[i] = sg;
-		for_each_cpu_mask(j, *nodemask) {
+		for_each_cpu_mask_nr(j, *nodemask) {
 			struct sched_domain *sd;
 
 			sd = &per_cpu(node_domains, j);
@@ -7504,21 +7504,21 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 
 	/* Calculate CPU power for physical packages and nodes */
 #ifdef CONFIG_SCHED_SMT
-	for_each_cpu_mask(i, *cpu_map) {
+	for_each_cpu_mask_nr(i, *cpu_map) {
 		struct sched_domain *sd = &per_cpu(cpu_domains, i);
 
 		init_sched_groups_power(i, sd);
 	}
 #endif
 #ifdef CONFIG_SCHED_MC
-	for_each_cpu_mask(i, *cpu_map) {
+	for_each_cpu_mask_nr(i, *cpu_map) {
 		struct sched_domain *sd = &per_cpu(core_domains, i);
 
 		init_sched_groups_power(i, sd);
 	}
 #endif
 
-	for_each_cpu_mask(i, *cpu_map) {
+	for_each_cpu_mask_nr(i, *cpu_map) {
 		struct sched_domain *sd = &per_cpu(phys_domains, i);
 
 		init_sched_groups_power(i, sd);
@@ -7538,7 +7538,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map,
 #endif
 
 	/* Attach the domains */
-	for_each_cpu_mask(i, *cpu_map) {
+	for_each_cpu_mask_nr(i, *cpu_map) {
 		struct sched_domain *sd;
 #ifdef CONFIG_SCHED_SMT
 		sd = &per_cpu(cpu_domains, i);
@@ -7621,7 +7621,7 @@ static void detach_destroy_domains(const cpumask_t *cpu_map)
 
 	unregister_sched_domain_sysctl();
 
-	for_each_cpu_mask(i, *cpu_map)
+	for_each_cpu_mask_nr(i, *cpu_map)
 		cpu_attach_domain(NULL, &def_root_domain, i);
 	synchronize_sched();
 	arch_destroy_sched_domains(cpu_map, &tmpmask);
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index e24ecd39c4b..e398318f101 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1022,7 +1022,7 @@ static int wake_idle(int cpu, struct task_struct *p)
 		    || ((sd->flags & SD_WAKE_IDLE_FAR)
 			&& !task_hot(p, task_rq(p)->clock, sd))) {
 			cpus_and(tmp, sd->span, p->cpus_allowed);
-			for_each_cpu_mask(i, tmp) {
+			for_each_cpu_mask_nr(i, tmp) {
 				if (idle_cpu(i)) {
 					if (i != task_cpu(p)) {
 						schedstat_inc(p,
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 060e87b0cb1..d73386c6e36 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -231,7 +231,7 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun)
 		return 1;
 
 	span = sched_rt_period_mask();
-	for_each_cpu_mask(i, span) {
+	for_each_cpu_mask_nr(i, span) {
 		int enqueue = 0;
 		struct rt_rq *rt_rq = sched_rt_period_rt_rq(rt_b, i);
 		struct rq *rq = rq_of_rt_rq(rt_rq);
@@ -272,7 +272,7 @@ static int balance_runtime(struct rt_rq *rt_rq)
 
 	spin_lock(&rt_b->rt_runtime_lock);
 	rt_period = ktime_to_ns(rt_b->rt_period);
-	for_each_cpu_mask(i, rd->span) {
+	for_each_cpu_mask_nr(i, rd->span) {
 		struct rt_rq *iter = sched_rt_period_rt_rq(rt_b, i);
 		s64 diff;
 
@@ -1000,7 +1000,7 @@ static int pull_rt_task(struct rq *this_rq)
 
 	next = pick_next_task_rt(this_rq);
 
-	for_each_cpu_mask(cpu, this_rq->rd->rto_mask) {
+	for_each_cpu_mask_nr(cpu, this_rq->rd->rto_mask) {
 		if (this_cpu == cpu)
 			continue;
 
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index 4a23517169a..06b17547f4e 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -301,7 +301,7 @@ static int add_del_listener(pid_t pid, cpumask_t *maskp, int isadd)
 		return -EINVAL;
 
 	if (isadd == REGISTER) {
-		for_each_cpu_mask(cpu, mask) {
+		for_each_cpu_mask_nr(cpu, mask) {
 			s = kmalloc_node(sizeof(struct listener), GFP_KERNEL,
 					 cpu_to_node(cpu));
 			if (!s)
@@ -320,7 +320,7 @@ static int add_del_listener(pid_t pid, cpumask_t *maskp, int isadd)
 
 	/* Deregister or cleanup */
 cleanup:
-	for_each_cpu_mask(cpu, mask) {
+	for_each_cpu_mask_nr(cpu, mask) {
 		listeners = &per_cpu(listener_array, cpu);
 		down_write(&listeners->sem);
 		list_for_each_entry_safe(s, tmp, &listeners->list, list) {
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 29fc39f1029..28c2b2c96ac 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -397,7 +397,7 @@ void flush_workqueue(struct workqueue_struct *wq)
 	might_sleep();
 	lock_acquire(&wq->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
 	lock_release(&wq->lockdep_map, 1, _THIS_IP_);
-	for_each_cpu_mask(cpu, *cpu_map)
+	for_each_cpu_mask_nr(cpu, *cpu_map)
 		flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, cpu));
 }
 EXPORT_SYMBOL_GPL(flush_workqueue);
@@ -477,7 +477,7 @@ static void wait_on_work(struct work_struct *work)
 	wq = cwq->wq;
 	cpu_map = wq_cpu_map(wq);
 
-	for_each_cpu_mask(cpu, *cpu_map)
+	for_each_cpu_mask_nr(cpu, *cpu_map)
 		wait_on_cpu_work(per_cpu_ptr(wq->cpu_wq, cpu), work);
 }
 
@@ -813,7 +813,7 @@ void destroy_workqueue(struct workqueue_struct *wq)
 	list_del(&wq->list);
 	spin_unlock(&workqueue_lock);
 
-	for_each_cpu_mask(cpu, *cpu_map)
+	for_each_cpu_mask_nr(cpu, *cpu_map)
 		cleanup_workqueue_thread(per_cpu_ptr(wq->cpu_wq, cpu));
 	put_online_cpus();
 
-- 
cgit v1.2.3


From 6d6a4360876f1e758e215570ccb04518db7cec3a Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: mm: use performance variant for_each_cpu_mask_nr

Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 mm/allocpercpu.c | 4 ++--
 mm/vmstat.c      | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/mm/allocpercpu.c b/mm/allocpercpu.c
index f4026bae6ee..b5411c2c47d 100644
--- a/mm/allocpercpu.c
+++ b/mm/allocpercpu.c
@@ -35,7 +35,7 @@ EXPORT_SYMBOL_GPL(percpu_depopulate);
 void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask)
 {
 	int cpu;
-	for_each_cpu_mask(cpu, *mask)
+	for_each_cpu_mask_nr(cpu, *mask)
 		percpu_depopulate(__pdata, cpu);
 }
 EXPORT_SYMBOL_GPL(__percpu_depopulate_mask);
@@ -86,7 +86,7 @@ int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
 	int cpu;
 
 	cpus_clear(populated);
-	for_each_cpu_mask(cpu, *mask)
+	for_each_cpu_mask_nr(cpu, *mask)
 		if (unlikely(!percpu_populate(__pdata, size, gfp, cpu))) {
 			__percpu_depopulate_mask(__pdata, &populated);
 			return -ENOMEM;
diff --git a/mm/vmstat.c b/mm/vmstat.c
index db9eabb2c5b..c3d4a781802 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -26,7 +26,7 @@ static void sum_vm_events(unsigned long *ret, cpumask_t *cpumask)
 
 	memset(ret, 0, NR_VM_EVENT_ITEMS * sizeof(unsigned long));
 
-	for_each_cpu_mask(cpu, *cpumask) {
+	for_each_cpu_mask_nr(cpu, *cpumask) {
 		struct vm_event_state *this = &per_cpu(vm_event_states, cpu);
 
 		for (i = 0; i < NR_VM_EVENT_ITEMS; i++)
-- 
cgit v1.2.3


From 0e12f848b337fc034ceb3c0d03d75f8de1b8cc96 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: net: use performance variant for_each_cpu_mask_nr

Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 net/core/dev.c  | 4 ++--
 net/iucv/iucv.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 58296307787..ee61b987f4d 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2239,7 +2239,7 @@ out:
 	 */
 	if (!cpus_empty(net_dma.channel_mask)) {
 		int chan_idx;
-		for_each_cpu_mask(chan_idx, net_dma.channel_mask) {
+		for_each_cpu_mask_nr(chan_idx, net_dma.channel_mask) {
 			struct dma_chan *chan = net_dma.channels[chan_idx];
 			if (chan)
 				dma_async_memcpy_issue_pending(chan);
@@ -4300,7 +4300,7 @@ static void net_dma_rebalance(struct net_dma *net_dma)
 	i = 0;
 	cpu = first_cpu(cpu_online_map);
 
-	for_each_cpu_mask(chan_idx, net_dma->channel_mask) {
+	for_each_cpu_mask_nr(chan_idx, net_dma->channel_mask) {
 		chan = net_dma->channels[chan_idx];
 
 		n = ((num_online_cpus() / cpus_weight(net_dma->channel_mask))
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index 91897076213..8de51107059 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -497,7 +497,7 @@ static void iucv_setmask_up(void)
 	/* Disable all cpu but the first in cpu_irq_cpumask. */
 	cpumask = iucv_irq_cpumask;
 	cpu_clear(first_cpu(iucv_irq_cpumask), cpumask);
-	for_each_cpu_mask(cpu, cpumask)
+	for_each_cpu_mask_nr(cpu, cpumask)
 		smp_call_function_single(cpu, iucv_block_cpu, NULL, 0, 1);
 }
 
-- 
cgit v1.2.3


From 334ef7a7ab8f80b689a2be95d5e62d2167900865 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: x86: use performance variant for_each_cpu_mask_nr

Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

commit 2d474871e2fb092eb46a0930aba5442e10eb96cc
Author: Mike Travis <travis@sgi.com>
Date:   Mon May 12 21:21:13 2008 +0200
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c       |  6 +++---
 arch/x86/kernel/cpu/cpufreq/p4-clockmod.c        |  6 +++---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c        |  8 ++++----
 arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 10 +++++-----
 arch/x86/kernel/cpu/cpufreq/speedstep-ich.c      |  4 ++--
 arch/x86/kernel/cpu/intel_cacheinfo.c            |  2 +-
 arch/x86/kernel/cpu/mcheck/mce_amd_64.c          |  4 ++--
 arch/x86/kernel/io_apic_64.c                     |  8 ++++----
 arch/x86/kernel/smpboot.c                        |  8 ++++----
 arch/x86/xen/smp.c                               |  4 ++--
 include/asm-x86/ipi.h                            |  2 +-
 11 files changed, 31 insertions(+), 31 deletions(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index b0c8208df9f..dd097b83583 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -202,7 +202,7 @@ static void drv_write(struct drv_cmd *cmd)
 	cpumask_t saved_mask = current->cpus_allowed;
 	unsigned int i;
 
-	for_each_cpu_mask(i, cmd->mask) {
+	for_each_cpu_mask_nr(i, cmd->mask) {
 		set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
 		do_drv_write(cmd);
 	}
@@ -451,7 +451,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
 	freqs.new = data->freq_table[next_state].frequency;
-	for_each_cpu_mask(i, cmd.mask) {
+	for_each_cpu_mask_nr(i, cmd.mask) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -466,7 +466,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	for_each_cpu_mask(i, cmd.mask) {
+	for_each_cpu_mask_nr(i, cmd.mask) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 199e4e05e5d..f1685fb91fb 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -122,7 +122,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 		return 0;
 
 	/* notifiers */
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -130,11 +130,11 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 	/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
 	 * Developer's Manual, Volume 3
 	 */
-	for_each_cpu_mask(i, policy->cpus)
+	for_each_cpu_mask_nr(i, policy->cpus)
 		cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
 
 	/* notifiers */
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 46d4034d9f3..06d6eea5e07 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -966,7 +966,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 	freqs.old = find_khz_freq_from_fid(data->currfid);
 	freqs.new = find_khz_freq_from_fid(fid);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -974,7 +974,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 	res = transition_fid_vid(data, fid, vid);
 	freqs.new = find_khz_freq_from_fid(data->currfid);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -997,7 +997,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -1005,7 +1005,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	res = transition_pstate(data, pstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 908dd347c67..8b0dd6f2a1a 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -476,7 +476,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 	saved_mask = current->cpus_allowed;
 	first_cpu = 1;
 	cpus_clear(covered_cpus);
-	for_each_cpu_mask(j, online_policy_cpus) {
+	for_each_cpu_mask_nr(j, online_policy_cpus) {
 		/*
 		 * Support for SMP systems.
 		 * Make sure we are running on CPU that wants to change freq
@@ -517,7 +517,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
 				target_freq, freqs.old, freqs.new, msr);
 
-			for_each_cpu_mask(k, online_policy_cpus) {
+			for_each_cpu_mask_nr(k, online_policy_cpus) {
 				freqs.cpu = k;
 				cpufreq_notify_transition(&freqs,
 					CPUFREQ_PRECHANGE);
@@ -540,7 +540,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 		preempt_enable();
 	}
 
-	for_each_cpu_mask(k, online_policy_cpus) {
+	for_each_cpu_mask_nr(k, online_policy_cpus) {
 		freqs.cpu = k;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -554,7 +554,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 		 */
 
 		if (!cpus_empty(covered_cpus)) {
-			for_each_cpu_mask(j, covered_cpus) {
+			for_each_cpu_mask_nr(j, covered_cpus) {
 				set_cpus_allowed_ptr(current,
 						     &cpumask_of_cpu(j));
 				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
@@ -564,7 +564,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 		tmp = freqs.new;
 		freqs.new = freqs.old;
 		freqs.old = tmp;
-		for_each_cpu_mask(j, online_policy_cpus) {
+		for_each_cpu_mask_nr(j, online_policy_cpus) {
 			freqs.cpu = j;
 			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 1b50244b1fd..191f7263c61 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -279,7 +279,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 
 	cpus_allowed = current->cpus_allowed;
 
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -292,7 +292,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 	/* allow to be run on all CPUs */
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 26d615dcb14..bfade3301c3 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -488,7 +488,7 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
 	int sibling;
 
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
-	for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) {
+	for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
 		sibling_leaf = CPUID4_INFO_IDX(sibling, index);	
 		cpu_clear(cpu, sibling_leaf->shared_cpu_map);
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 7c9a813e119..88736cadbaa 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -527,7 +527,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	if (err)
 		goto out_free;
 
-	for_each_cpu_mask(i, b->cpus) {
+	for_each_cpu_mask_nr(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
@@ -617,7 +617,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 #endif
 
 	/* remove all sibling symlinks before unregistering */
-	for_each_cpu_mask(i, b->cpus) {
+	for_each_cpu_mask_nr(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index ef1a8dfcc52..e2838cbd2ff 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -718,7 +718,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask)
 			return 0;
 	}
 
-	for_each_cpu_mask(cpu, mask) {
+	for_each_cpu_mask_nr(cpu, mask) {
 		cpumask_t domain, new_mask;
 		int new_cpu;
 		int vector, offset;
@@ -739,7 +739,7 @@ next:
 			continue;
 		if (vector == IA32_SYSCALL_VECTOR)
 			goto next;
-		for_each_cpu_mask(new_cpu, new_mask)
+		for_each_cpu_mask_nr(new_cpu, new_mask)
 			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
 				goto next;
 		/* Found one! */
@@ -749,7 +749,7 @@ next:
 			cfg->move_in_progress = 1;
 			cfg->old_domain = cfg->domain;
 		}
-		for_each_cpu_mask(new_cpu, new_mask)
+		for_each_cpu_mask_nr(new_cpu, new_mask)
 			per_cpu(vector_irq, new_cpu)[vector] = irq;
 		cfg->vector = vector;
 		cfg->domain = domain;
@@ -781,7 +781,7 @@ static void __clear_irq_vector(int irq)
 
 	vector = cfg->vector;
 	cpus_and(mask, cfg->domain, cpu_online_map);
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu_mask_nr(cpu, mask)
 		per_cpu(vector_irq, cpu)[vector] = -1;
 
 	cfg->vector = 0;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 38988491c62..fff8ebaa554 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -487,7 +487,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 	cpu_set(cpu, cpu_sibling_setup_map);
 
 	if (smp_num_siblings > 1) {
-		for_each_cpu_mask(i, cpu_sibling_setup_map) {
+		for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
 			if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
 			    c->cpu_core_id == cpu_data(i).cpu_core_id) {
 				cpu_set(i, per_cpu(cpu_sibling_map, cpu));
@@ -510,7 +510,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 		return;
 	}
 
-	for_each_cpu_mask(i, cpu_sibling_setup_map) {
+	for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
 		if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
 		    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
 			cpu_set(i, c->llc_shared_map);
@@ -1298,7 +1298,7 @@ static void remove_siblinginfo(int cpu)
 	int sibling;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) {
 		cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
 		/*/
 		 * last thread sibling in this cpu core going down
@@ -1307,7 +1307,7 @@ static void remove_siblinginfo(int cpu)
 			cpu_data(sibling).booted_cores--;
 	}
 
-	for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu))
 		cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
 	cpus_clear(per_cpu(cpu_sibling_map, cpu));
 	cpus_clear(per_cpu(cpu_core_map, cpu));
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 94e69000f98..7a70638797e 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -345,7 +345,7 @@ static void xen_send_IPI_mask(cpumask_t mask, enum ipi_vector vector)
 
 	cpus_and(mask, mask, cpu_online_map);
 
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu_mask_nr(cpu, mask)
 		xen_send_IPI_one(cpu, vector);
 }
 
@@ -413,7 +413,7 @@ int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *),
 
 	/* Make sure other vcpus get a chance to run if they need to. */
 	yield = false;
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu_mask_nr(cpu, mask)
 		if (xen_vcpu_stolen(cpu))
 			yield = true;
 
diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h
index ecc80f341f3..5f7310aa3ef 100644
--- a/include/asm-x86/ipi.h
+++ b/include/asm-x86/ipi.h
@@ -121,7 +121,7 @@ static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
 	 * - mbligh
 	 */
 	local_irq_save(flags);
-	for_each_cpu_mask(query_cpu, mask) {
+	for_each_cpu_mask_nr(query_cpu, mask) {
 		__send_IPI_dest_field(per_cpu(x86_cpu_to_apicid, query_cpu),
 				      vector, APIC_DEST_PHYSICAL);
 	}
-- 
cgit v1.2.3


From 5d7bfd0c4d463d288422032c9903d0452dee141d Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: infiniband: use performance variant for_each_cpu_mask_nr

Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/infiniband/hw/ehca/ehca_irq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index ce1ab0571be..43180b952c1 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -641,8 +641,8 @@ static inline int find_next_online_cpu(struct ehca_comp_pool *pool)
 		ehca_dmp(&cpu_online_map, sizeof(cpumask_t), "");
 
 	spin_lock_irqsave(&pool->last_cpu_lock, flags);
-	cpu = next_cpu(pool->last_cpu, cpu_online_map);
-	if (cpu == NR_CPUS)
+	cpu = next_cpu_nr(pool->last_cpu, cpu_online_map);
+	if (cpu >= nr_cpu_ids)
 		cpu = first_cpu(cpu_online_map);
 	pool->last_cpu = cpu;
 	spin_unlock_irqrestore(&pool->last_cpu_lock, flags);
-- 
cgit v1.2.3


From cad0e458d17c643c20c1d38f45a1d26125e6a622 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: clocksource/events: use performance variant for_each_cpu_mask_nr

Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/clocksource.c    | 4 ++--
 kernel/time/tick-broadcast.c | 3 +--
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index dadde5361f3..60ceabd53f2 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -145,9 +145,9 @@ static void clocksource_watchdog(unsigned long data)
 		 * Cycle through CPUs to check if the CPUs stay
 		 * synchronized to each other.
 		 */
-		int next_cpu = next_cpu(raw_smp_processor_id(), cpu_online_map);
+		int next_cpu = next_cpu_nr(raw_smp_processor_id(), cpu_online_map);
 
-		if (next_cpu >= NR_CPUS)
+		if (next_cpu >= nr_cpu_ids)
 			next_cpu = first_cpu(cpu_online_map);
 		watchdog_timer.expires += WATCHDOG_INTERVAL;
 		add_timer_on(&watchdog_timer, next_cpu);
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 57a1f02e5ec..2d0a9634625 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -397,8 +397,7 @@ again:
 	mask = CPU_MASK_NONE;
 	now = ktime_get();
 	/* Find all expired events */
-	for (cpu = first_cpu(tick_broadcast_oneshot_mask); cpu != NR_CPUS;
-	     cpu = next_cpu(cpu, tick_broadcast_oneshot_mask)) {
+	for_each_cpu_mask_nr(cpu, tick_broadcast_oneshot_mask) {
 		td = &per_cpu(tick_cpu_device, cpu);
 		if (td->evtdev->next_event.tv64 <= now.tv64)
 			cpu_set(cpu, mask);
-- 
cgit v1.2.3


From 3f9b48a7584851997702cdc3f58e7811b5546397 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 May 2008 21:21:13 +0200
Subject: net: Pass reference to cpumask variable in net/sunrpc/svc.c

  * Pass reference to cpumask variable instead of using stack.

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 net/sunrpc/svc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 01c7e311b90..d43cf8ddff6 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -603,7 +603,7 @@ __svc_create_thread(svc_thread_fn func, struct svc_serv *serv,
 	error = kernel_thread((int (*)(void *)) func, rqstp, 0);
 
 	if (have_oldmask)
-		set_cpus_allowed(current, oldmask);
+		set_cpus_allowed_ptr(current, &oldmask);
 
 	if (error < 0)
 		goto out_thread;
-- 
cgit v1.2.3


From 7baac8b91f9871ba8cb09af84de4ae1d86d07812 Mon Sep 17 00:00:00 2001
From: Alexander van Heukelum <heukelum@mailshack.com>
Date: Tue, 13 May 2008 11:28:21 +0200
Subject: cpumask: make for_each_cpu_mask a bit smaller

The for_each_cpu_mask loop is used quite often in the kernel. It
makes use of two functions: first_cpu and next_cpu. This patch
changes for_each_cpu_mask to use only the latter. Because next_cpu
finds the next eligible cpu _after_ the given one, the iteration
variable has to be initialized to -1 and next_cpu has to be
called with this value before the first iteration. An x86_64
defconfig kernel (from sched/latest) is about 2500 bytes smaller
with this patch applied:

   text	   data	    bss	    dec	    hex	filename
6222517	 917952	 749932	7890401	 7865e1	vmlinux.orig
6219922	 917952	 749932	7887806	 785bbe	vmlinux

The same size reduction is seen for defconfig+MAXSMP

   text	   data	    bss	    dec	    hex	filename
6241772	2563968	1492716	10298456	 9d2458	vmlinux.orig
6239211	2563968	1492716	10295895	 9d1a57	vmlinux

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 include/linux/cpumask.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index b49472d1af8..80226e77614 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -370,10 +370,10 @@ int __any_online_cpu(const cpumask_t *mask);
 #define first_cpu(src)		__first_cpu(&(src))
 #define next_cpu(n, src)	__next_cpu((n), &(src))
 #define any_online_cpu(mask) __any_online_cpu(&(mask))
-#define for_each_cpu_mask(cpu, mask)		\
-	for ((cpu) = first_cpu(mask);		\
-		(cpu) < NR_CPUS;		\
-		(cpu) = next_cpu((cpu), (mask)))
+#define for_each_cpu_mask(cpu, mask)			\
+	for ((cpu) = -1;				\
+		(cpu) = next_cpu((cpu), (mask)),	\
+		(cpu) < NR_CPUS; )
 #endif
 
 #if NR_CPUS <= 64
@@ -387,10 +387,10 @@ int __any_online_cpu(const cpumask_t *mask);
 int __next_cpu_nr(int n, const cpumask_t *srcp);
 #define next_cpu_nr(n, src)	__next_cpu_nr((n), &(src))
 #define cpus_weight_nr(cpumask)	__cpus_weight(&(cpumask), nr_cpu_ids)
-#define for_each_cpu_mask_nr(cpu, mask)		\
-	for ((cpu) = first_cpu(mask);		\
-		(cpu) < nr_cpu_ids;		\
-		(cpu) = next_cpu_nr((cpu), (mask)))
+#define for_each_cpu_mask_nr(cpu, mask)			\
+	for ((cpu) = -1;				\
+		(cpu) = next_cpu_nr((cpu), (mask)),	\
+		(cpu) < nr_cpu_ids; )
 
 #endif /* NR_CPUS > 64 */
 
-- 
cgit v1.2.3


From 9c44bc03fff44ff04237a7d92e35304a0e50c331 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 12 May 2008 21:21:04 +0200
Subject: softlockup: allow panic on lockup

allow users to configure the softlockup detector to generate a panic
instead of a warning message.

high-availability systems might opt for this strict method (combined
with panic_timeout= boot option/sysctl), instead of generating
softlockup warnings ad infinitum.

also, automated tests work better if the system reboots reliably (into
a safe kernel) in case of a lockup.

The full spectrum of configurability is supported: boot option, sysctl
option and Kconfig option.

it's default-disabled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 Documentation/kernel-parameters.txt |  3 +++
 include/linux/sched.h               |  3 ++-
 kernel/softlockup.c                 | 21 +++++++++++++++++++++
 kernel/sysctl.c                     | 11 +++++++++++
 lib/Kconfig.debug                   | 26 +++++++++++++++++++++++++-
 5 files changed, 62 insertions(+), 2 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e07c432c731..042588fa12e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1971,6 +1971,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	snd-ymfpci=	[HW,ALSA]
 
+	softlockup_panic=
+			[KNL] Should the soft-lockup detector generate panics.
+
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/sonypi.txt
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 5395a6176f4..71f5972dc48 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -294,7 +294,8 @@ extern void softlockup_tick(void);
 extern void spawn_softlockup_task(void);
 extern void touch_softlockup_watchdog(void);
 extern void touch_all_softlockup_watchdogs(void);
-extern unsigned long  softlockup_thresh;
+extern unsigned int  softlockup_panic;
+extern unsigned long softlockup_thresh;
 extern unsigned long sysctl_hung_task_check_count;
 extern unsigned long sysctl_hung_task_timeout_secs;
 extern unsigned long sysctl_hung_task_warnings;
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 01b6522fd92..78e0ad21cb0 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -27,6 +27,21 @@ static DEFINE_PER_CPU(struct task_struct *, watchdog_task);
 static int __read_mostly did_panic;
 unsigned long __read_mostly softlockup_thresh = 60;
 
+/*
+ * Should we panic (and reboot, if panic_timeout= is set) when a
+ * soft-lockup occurs:
+ */
+unsigned int __read_mostly softlockup_panic =
+				CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE;
+
+static int __init softlockup_panic_setup(char *str)
+{
+	softlockup_panic = simple_strtoul(str, NULL, 0);
+
+	return 1;
+}
+__setup("softlockup_panic=", softlockup_panic_setup);
+
 static int
 softlock_panic(struct notifier_block *this, unsigned long event, void *ptr)
 {
@@ -120,6 +135,9 @@ void softlockup_tick(void)
 	else
 		dump_stack();
 	spin_unlock(&print_lock);
+
+	if (softlockup_panic)
+		panic("softlockup: hung tasks");
 }
 
 /*
@@ -172,6 +190,9 @@ static void check_hung_task(struct task_struct *t, unsigned long now)
 
 	t->last_switch_timestamp = now;
 	touch_nmi_watchdog();
+
+	if (softlockup_panic)
+		panic("softlockup: blocked tasks");
 }
 
 /*
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 29116652dca..2d3b388c402 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -727,6 +727,17 @@ static struct ctl_table kern_table[] = {
 	},
 #endif
 #ifdef CONFIG_DETECT_SOFTLOCKUP
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "softlockup_panic",
+		.data		= &softlockup_panic,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_doulongvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &zero,
+		.extra2		= &one,
+	},
 	{
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "softlockup_thresh",
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index d2099f41aa1..509ae35a9ef 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -147,7 +147,7 @@ config DETECT_SOFTLOCKUP
 	help
 	  Say Y here to enable the kernel to detect "soft lockups",
 	  which are bugs that cause the kernel to loop in kernel
-	  mode for more than 10 seconds, without giving other tasks a
+	  mode for more than 60 seconds, without giving other tasks a
 	  chance to run.
 
 	  When a soft-lockup is detected, the kernel will print the
@@ -159,6 +159,30 @@ config DETECT_SOFTLOCKUP
 	   can be detected via the NMI-watchdog, on platforms that
 	   support it.)
 
+config BOOTPARAM_SOFTLOCKUP_PANIC
+	bool "Panic (Reboot) On Soft Lockups"
+	depends on DETECT_SOFTLOCKUP
+	help
+	  Say Y here to enable the kernel to panic on "soft lockups",
+	  which are bugs that cause the kernel to loop in kernel
+	  mode for more than 60 seconds, without giving other tasks a
+	  chance to run.
+
+	  The panic can be used in combination with panic_timeout,
+	  to cause the system to reboot automatically after a
+	  lockup has been detected. This feature is useful for
+	  high-availability systems that have uptime guarantees and
+	  where a lockup must be resolved ASAP.
+
+	  Say N if unsure.
+
+config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE
+	int
+	depends on DETECT_SOFTLOCKUP
+	range 0 1
+	default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
+	default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
+
 config SCHED_DEBUG
 	bool "Collect scheduler debugging info"
 	depends on DEBUG_KERNEL && PROC_FS
-- 
cgit v1.2.3


From 9383d9679056e6cc4e7ff70f31da945a268238f4 Mon Sep 17 00:00:00 2001
From: Dimitri Sivanich <sivanich@sgi.com>
Date: Mon, 12 May 2008 21:21:14 +0200
Subject: softlockup: fix softlockup_thresh unaligned access and disable
 detection at runtime

Fix unaligned access errors when setting softlockup_thresh on
64 bit platforms.

Allow softlockup detection to be disabled by setting
softlockup_thresh <= 0.

Detect that boot time softlockup detection has been disabled
earlier in softlockup_tick.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 include/linux/sched.h |  2 +-
 kernel/softlockup.c   | 12 ++++++++++--
 kernel/sysctl.c       |  9 +++++----
 3 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index 71f5972dc48..ea26221644e 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -295,10 +295,10 @@ extern void spawn_softlockup_task(void);
 extern void touch_softlockup_watchdog(void);
 extern void touch_all_softlockup_watchdogs(void);
 extern unsigned int  softlockup_panic;
-extern unsigned long softlockup_thresh;
 extern unsigned long sysctl_hung_task_check_count;
 extern unsigned long sysctl_hung_task_timeout_secs;
 extern unsigned long sysctl_hung_task_warnings;
+extern int softlockup_thresh;
 #else
 static inline void softlockup_tick(void)
 {
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 78e0ad21cb0..a3a0b239b7f 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -25,7 +25,7 @@ static DEFINE_PER_CPU(unsigned long, print_timestamp);
 static DEFINE_PER_CPU(struct task_struct *, watchdog_task);
 
 static int __read_mostly did_panic;
-unsigned long __read_mostly softlockup_thresh = 60;
+int __read_mostly softlockup_thresh = 60;
 
 /*
  * Should we panic (and reboot, if panic_timeout= is set) when a
@@ -94,6 +94,14 @@ void softlockup_tick(void)
 	struct pt_regs *regs = get_irq_regs();
 	unsigned long now;
 
+	/* Is detection switched off? */
+	if (!per_cpu(watchdog_task, this_cpu) || softlockup_thresh <= 0) {
+		/* Be sure we don't false trigger if switched back on */
+		if (touch_timestamp)
+			per_cpu(touch_timestamp, this_cpu) = 0;
+		return;
+	}
+
 	if (touch_timestamp == 0) {
 		touch_softlockup_watchdog();
 		return;
@@ -104,7 +112,7 @@ void softlockup_tick(void)
 	/* report at most once a second */
 	if ((print_timestamp >= touch_timestamp &&
 			print_timestamp < (touch_timestamp + 1)) ||
-			did_panic || !per_cpu(watchdog_task, this_cpu)) {
+			did_panic) {
 		return;
 	}
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 2d3b388c402..31c19a79738 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -84,12 +84,13 @@ extern int latencytop_enabled;
 extern int sysctl_nr_open_min, sysctl_nr_open_max;
 
 /* Constants used for minimum and  maximum */
-#if defined(CONFIG_DETECT_SOFTLOCKUP) || defined(CONFIG_HIGHMEM)
+#ifdef CONFIG_HIGHMEM
 static int one = 1;
 #endif
 
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 static int sixty = 60;
+static int neg_one = -1;
 #endif
 
 #ifdef CONFIG_MMU
@@ -742,11 +743,11 @@ static struct ctl_table kern_table[] = {
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "softlockup_thresh",
 		.data		= &softlockup_thresh,
-		.maxlen		= sizeof(unsigned long),
+		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_doulongvec_minmax,
+		.proc_handler	= &proc_dointvec_minmax,
 		.strategy	= &sysctl_intvec,
-		.extra1		= &one,
+		.extra1		= &neg_one,
 		.extra2		= &sixty,
 	},
 	{
-- 
cgit v1.2.3


From 1c4cd6dd1d0fd3057bb6b8c87460049497889d1b Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 12 May 2008 21:21:14 +0200
Subject: softlockup: fix softlockup_thresh fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/sysctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 31c19a79738..a829dc8d7a9 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -84,7 +84,7 @@ extern int latencytop_enabled;
 extern int sysctl_nr_open_min, sysctl_nr_open_max;
 
 /* Constants used for minimum and  maximum */
-#ifdef CONFIG_HIGHMEM
+#if defined(CONFIG_HIGHMEM) || defined(CONFIG_DETECT_SOFTLOCKUP)
 static int one = 1;
 #endif
 
-- 
cgit v1.2.3


From 02ff375590ac4140d88afc76505df1ad45c6af59 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 12 May 2008 15:43:53 +0200
Subject: softlockup: fix false positives on nohz if CPU is 100% idle for more
 than 60 seconds

Fix (probably theoretical only) rq->clock update bug:
in tick_nohz_update_jiffies() [which is called on all irq
entry on all cpus where the irq entry hits an idle cpu] we
call touch_softlockup_watchdog() before we update jiffies.
That works fine most of the time when idle timeouts are within
60 seconds. But when an idle timeout is beyond 60 seconds,
jiffies is updated with a jump of more than 60 seconds,
which causes a jump in cpu-clock of more than 60 seconds,
triggering a false positive.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/time/tick-sched.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index b854a895591..28abad66fc8 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -133,8 +133,6 @@ void tick_nohz_update_jiffies(void)
 	if (!ts->tick_stopped)
 		return;
 
-	touch_softlockup_watchdog();
-
 	cpu_clear(cpu, nohz_cpu_mask);
 	now = ktime_get();
 	ts->idle_waketime = now;
@@ -142,6 +140,8 @@ void tick_nohz_update_jiffies(void)
 	local_irq_save(flags);
 	tick_do_update_jiffies64(now);
 	local_irq_restore(flags);
+
+	touch_softlockup_watchdog();
 }
 
 void tick_nohz_stop_idle(int cpu)
-- 
cgit v1.2.3


From 8c2238eaaf0f774ca0f8d9daad7a616429bbb7f1 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Tue, 27 May 2008 12:23:29 -0500
Subject: softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression

The touch_nmi_watchdog() routine on x86 ultimately calls
touch_softlockup_watchdog().  The problem is that to touch the
softlockup watchdog, the cpu_clock code has to be called which could
involve multiple cpu locks and can lead to a hard hang if one of the
locks is held by a processor that is not going to return anytime soon
(such as could be the case with kgdb or perhaps even with some other
kind of exception).

This patch causes the public version of the
touch_softlockup_watchdog() to defer the cpu clock access to a later
point.

The test case for this problem is to use the following kernel config
options:

CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100I100000"

It should be noted that kgdb test suite and these options were not
available until 2.6.26-rc2, so it was necessary to patch the kgdb
test suite during the bisection.

I would consider this patch a regression fix because the problem first
appeared in commit 27ec4407790d075c325e1f4da0a19c56953cce23 when some
logic was added to try to periodically sync the clocks.  It was
possible to work around this particular problem by simply not
performing the sync anytime the system was in a critical context.
This was ok until commit 3e51f33fcc7f55e6df25d15b55ed10c8b4da84cd,
which added config option CONFIG_HAVE_UNSTABLE_SCHED_CLOCK and some
multi-cpu locks to sync the clocks.  It became clear that accessing
this code from an nmi was the source of the lockups.  Avoiding the
access to the low level clock code from an code inside the NMI
processing also fixed the problem with the 27ec44... commit.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/softlockup.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index a3a0b239b7f..6b682d86bdd 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -64,12 +64,17 @@ static unsigned long get_timestamp(int this_cpu)
 	return cpu_clock(this_cpu) >> 30LL;  /* 2^30 ~= 10^9 */
 }
 
-void touch_softlockup_watchdog(void)
+static void __touch_softlockup_watchdog(void)
 {
 	int this_cpu = raw_smp_processor_id();
 
 	__raw_get_cpu_var(touch_timestamp) = get_timestamp(this_cpu);
 }
+
+void touch_softlockup_watchdog(void)
+{
+	__raw_get_cpu_var(touch_timestamp) = 0;
+}
 EXPORT_SYMBOL(touch_softlockup_watchdog);
 
 void touch_all_softlockup_watchdogs(void)
@@ -103,7 +108,7 @@ void softlockup_tick(void)
 	}
 
 	if (touch_timestamp == 0) {
-		touch_softlockup_watchdog();
+		__touch_softlockup_watchdog();
 		return;
 	}
 
@@ -118,7 +123,7 @@ void softlockup_tick(void)
 
 	/* do not print during early bootup: */
 	if (unlikely(system_state != SYSTEM_RUNNING)) {
-		touch_softlockup_watchdog();
+		__touch_softlockup_watchdog();
 		return;
 	}
 
@@ -243,7 +248,7 @@ static int watchdog(void *__bind_cpu)
 	sched_setscheduler(current, SCHED_FIFO, &param);
 
 	/* initialize timestamp */
-	touch_softlockup_watchdog();
+	__touch_softlockup_watchdog();
 
 	set_current_state(TASK_INTERRUPTIBLE);
 	/*
@@ -252,7 +257,7 @@ static int watchdog(void *__bind_cpu)
 	 * debug-printout triggers in softlockup_tick().
 	 */
 	while (!kthread_should_stop()) {
-		touch_softlockup_watchdog();
+		__touch_softlockup_watchdog();
 		schedule();
 
 		if (kthread_should_stop())
-- 
cgit v1.2.3


From a29ccf6f823a84d89e1c7aaaf221cf7282022024 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Tue, 3 Jun 2008 14:59:40 +0100
Subject: Make console charset translation optional

By turning off the new CONSOLE_TRANSLATIONS option and dropping the
associated code and tables from the kernel, we can save about 7KiB.

Taken from linux-tiny project by Tim Bird and mangled further by dwmw2.

Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/char/Kconfig       |  8 ++++++++
 drivers/char/Makefile      |  4 ++--
 drivers/char/vt.c          |  2 +-
 include/linux/consolemap.h | 14 ++++++++++++++
 include/linux/vt_kern.h    | 19 +++++++++++++++++++
 5 files changed, 44 insertions(+), 3 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 595a925c62a..b7f7371dee7 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -36,6 +36,14 @@ config VT
 	  If unsure, say Y, or else you won't be able to do much with your new
 	  shiny Linux system :-)
 
+config CONSOLE_TRANSLATIONS
+	depends on VT
+	default y
+	bool "Enable character translations in console" if EMBEDDED
+	---help---
+	  This enables support for font mapping and Unicode translation
+	  on virtual consoles.
+
 config VT_CONSOLE
 	bool "Support for console on virtual terminal" if EMBEDDED
 	depends on VT
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 4c1c584e9eb..6ef173cab14 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -12,8 +12,8 @@ obj-y	 += mem.o random.o tty_io.o n_tty.o tty_ioctl.o
 obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
 obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
 obj-y				+= misc.o
-obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o consolemap.o \
-				   consolemap_deftbl.o selection.o keyboard.o
+obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o selection.o keyboard.o
+obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
 obj-$(CONFIG_HW_CONSOLE)	+= vt.o defkeymap.o
 obj-$(CONFIG_AUDIT)		+= tty_audit.o
 obj-$(CONFIG_MAGIC_SYSRQ)	+= sysrq.o
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index fa1ffbf2c62..18b7fb06dac 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2208,7 +2208,7 @@ rescan_last_byte:
 			c = 0xfffd;
 		    tc = c;
 		} else {	/* no utf or alternate charset mode */
-		    tc = vc->vc_translate[vc->vc_toggle_meta ? (c | 0x80) : c];
+		    tc = vc_translate(vc, c);
 		}
 
 		param.c = tc;
diff --git a/include/linux/consolemap.h b/include/linux/consolemap.h
index e2bf7e5db39..c4811da1338 100644
--- a/include/linux/consolemap.h
+++ b/include/linux/consolemap.h
@@ -3,6 +3,9 @@
  *
  * Interface between console.c, selection.c  and consolemap.c
  */
+#ifndef __LINUX_CONSOLEMAP_H__
+#define __LINUX_CONSOLEMAP_H__
+
 #define LAT1_MAP 0
 #define GRAF_MAP 1
 #define IBMPC_MAP 2
@@ -10,6 +13,7 @@
 
 #include <linux/types.h>
 
+#ifdef CONFIG_CONSOLE_TRANSLATIONS
 struct vc_data;
 
 extern u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode);
@@ -18,3 +22,13 @@ extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
 extern u32 conv_8bit_to_uni(unsigned char c);
 extern int conv_uni_to_8bit(u32 uni);
 void console_map_init(void);
+#else
+#define inverse_translate(conp, glyph, uni) ((uint16_t)glyph)
+#define set_translate(m, vc) ((unsigned short *)NULL)
+#define conv_uni_to_pc(conp, ucs) ((int) (ucs > 0xff ? -1: ucs))
+#define conv_8bit_to_uni(c) ((uint32_t)(c))
+#define conv_uni_to_8bit(c) ((int) ((c) & 0xff))
+#define console_map_init(c) do { ; } while (0)
+#endif /* CONFIG_CONSOLE_TRANSLATIONS */
+
+#endif /* __LINUX_CONSOLEMAP_H__ */
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 9448ffbdcbf..14c0e91be9b 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -12,6 +12,7 @@
 #include <linux/mutex.h>
 #include <linux/console_struct.h>
 #include <linux/mm.h>
+#include <linux/consolemap.h>
 
 /*
  * Presently, a lot of graphics programs do not restore the contents of
@@ -54,6 +55,7 @@ void redraw_screen(struct vc_data *vc, int is_switch);
 struct tty_struct;
 int tioclinux(struct tty_struct *tty, unsigned long arg);
 
+#ifdef CONFIG_CONSOLE_TRANSLATIONS
 /* consolemap.c */
 
 struct unimapinit;
@@ -71,6 +73,23 @@ void con_free_unimap(struct vc_data *vc);
 void con_protect_unimap(struct vc_data *vc, int rdonly);
 int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
 
+#define vc_translate(vc, c) ((vc)->vc_translate[(c) |			\
+					(vc)->vc_toggle_meta ? 0x80 : 0])
+#else
+#define con_set_trans_old(arg) (0)
+#define con_get_trans_old(arg) (-EINVAL)
+#define con_set_trans_new(arg) (0)
+#define con_get_trans_new(arg) (-EINVAL)
+#define con_clear_unimap(vc, ui) (0)
+#define con_set_unimap(vc, ct, list) (0)
+#define con_set_default_unimap(vc) (0)
+#define con_copy_unimap(d, s) (0)
+#define con_get_unimap(vc, ct, uct, list) (-EINVAL)
+#define con_free_unimap(vc) do { ; } while (0)
+
+#define vc_translate(vc, c) (c)
+#endif
+
 /* vt.c */
 int vt_waitactive(int vt);
 void change_console(struct vc_data *new_vc);
-- 
cgit v1.2.3


From 8fd310a1cc3aadb7a17d844beeefae66b1a169c6 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 27 May 2008 11:19:57 +0300
Subject: [MTD] [NOR] Add support for AMD AM29SL800D[BT] NOR flash chips

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/jedec_probe.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 99f9ed21f66..b717f1a5d6b 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -58,6 +58,8 @@
 #define AM29LV040B	0x004F
 #define AM29F032B	0x0041
 #define AM29F002T	0x00B0
+#define AM29SL800DB	0x226B
+#define AM29SL800DT	0x22EA
 
 /* Atmel */
 #define AT49BV512	0x0003
@@ -523,6 +525,36 @@ static const struct amd_flash_info jedec_table[] = {
 			ERASEINFO(0x02000,2),
 			ERASEINFO(0x04000,1),
 		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29SL800DT,
+		.name		= "AMD AM29SL800DT",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29SL800DB,
+		.name		= "AMD AM29SL800DB",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
 	}, {
 		.mfr_id		= MANUFACTURER_ATMEL,
 		.dev_id		= AT49BV512,
-- 
cgit v1.2.3


From 5c9c11e1c47c2101253a95c54ef72e13edcc728a Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 27 May 2008 11:20:03 +0300
Subject: [MTD] [NOR] Add support for flash chips with ID in bank other than 0

According to JEDEC "Standard Manufacturer's Identification Code"
(http://www.jedec.org/download/search/jep106W.pdf)
several first banks of NOR flash can contain 0x7f instead of actual ID.
This patch adds support for reading manufacturer ID from banks other than 0.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/jedec_probe.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index b717f1a5d6b..279fe60b785 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -37,6 +37,7 @@
 #define MANUFACTURER_ST		0x0020
 #define MANUFACTURER_TOSHIBA	0x0098
 #define MANUFACTURER_WINBOND	0x00da
+#define CONTINUATION_CODE	0x007f
 
 
 /* AMD */
@@ -1760,9 +1761,21 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base,
 {
 	map_word result;
 	unsigned long mask;
-	u32 ofs = cfi_build_cmd_addr(0, cfi_interleave(cfi), cfi->device_type);
-	mask = (1 << (cfi->device_type * 8)) -1;
-	result = map_read(map, base + ofs);
+	int bank = 0;
+
+	/* According to JEDEC "Standard Manufacturer's Identification Code"
+	 * (http://www.jedec.org/download/search/jep106W.pdf)
+	 * several first banks can contain 0x7f instead of actual ID
+	 */
+	do {
+		uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8),
+						  cfi_interleave(cfi),
+						  cfi->device_type);
+		mask = (1 << (cfi->device_type * 8)) - 1;
+		result = map_read(map, base + ofs);
+		bank++;
+	} while ((result.x[0] & mask) == CONTINUATION_CODE);
+
 	return result.x[0] & mask;
 }
 
-- 
cgit v1.2.3


From 1b0b30acf3fc76e5d4d278fa5a8c9c6ac9898745 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 27 May 2008 11:20:07 +0300
Subject: [MTD] [NOR] Add support for Eon EN29SL800B[BT] NOR flash chips

This patch add support for non-CFI Eon EN29SL800B[BT] NOR flash chips.
The Eon chips have manufacturer ID in the first bank, therefore this patch
depends on support for flash chips with ID in bank other than 0.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/jedec_probe.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 279fe60b785..b229da8060d 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -26,6 +26,7 @@
 /* Manufacturers */
 #define MANUFACTURER_AMD	0x0001
 #define MANUFACTURER_ATMEL	0x001f
+#define MANUFACTURER_EON	0x001c
 #define MANUFACTURER_FUJITSU	0x0004
 #define MANUFACTURER_HYUNDAI	0x00AD
 #define MANUFACTURER_INTEL	0x0089
@@ -70,6 +71,10 @@
 #define AT49BV32X	0x00C8
 #define AT49BV32XT	0x00C9
 
+/* Eon */
+#define EN29SL800BB	0x226B
+#define EN29SL800BT	0x22EA
+
 /* Fujitsu */
 #define MBM29F040C	0x00A4
 #define MBM29F800BA	0x2258
@@ -633,6 +638,36 @@ static const struct amd_flash_info jedec_table[] = {
 			ERASEINFO(0x10000,63),
 			ERASEINFO(0x02000,8)
 		}
+	}, {
+		.mfr_id		= MANUFACTURER_EON,
+		.dev_id		= EN29SL800BT,
+		.name		= "Eon EN29SL800BT",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_EON,
+		.dev_id		= EN29SL800BB,
+		.name		= "Eon EN29SL800BB",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
 	}, {
 		.mfr_id		= MANUFACTURER_FUJITSU,
 		.dev_id		= MBM29F040C,
-- 
cgit v1.2.3


From 437d0d299f0e08954c3cb680221d7e888e1a857f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Toralf=20F=C3=B6rster?= <toralf.foerster@gmx.de>
Date: Mon, 26 May 2008 20:35:46 +0200
Subject: [MTD] [NAND] fix 2 "unused variable" warnings in cafe_nand.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/cafe_nand.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index da6ceaa80ba..95345d05157 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -626,10 +626,12 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 {
 	struct mtd_info *mtd;
 	struct cafe_priv *cafe;
-	struct mtd_partition *parts;
 	uint32_t ctrl;
-	int nr_parts;
 	int err = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int nr_parts;
+#endif
 
 	/* Very old versions shared the same PCI ident for all three
 	   functions on the chip. Verify the class too... */
-- 
cgit v1.2.3


From ff0de61c3612410dc84a8de28761ef840d5d35ac Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Sun, 25 May 2008 07:35:17 -0400
Subject: [MTD] [NAND] excite_nandflash: simplify code using ARRAY_SIZE()
 macro.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/excite_nandflash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
index bed87290dec..ced14b5294d 100644
--- a/drivers/mtd/nand/excite_nandflash.c
+++ b/drivers/mtd/nand/excite_nandflash.c
@@ -209,7 +209,7 @@ static int __init excite_nand_probe(struct device *dev)
 	if (likely(!scan_res)) {
 		DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
 		add_mtd_partitions(&drvdata->board_mtd, partition_info,
-				   sizeof partition_info / sizeof partition_info[0]);
+				   ARRAY_SIZE(partition_info));
 	} else {
 		iounmap(drvdata->regs);
 		kfree(drvdata);
-- 
cgit v1.2.3


From 2606c79759e83fd8b1e45bc99b10e65a1dcf1602 Mon Sep 17 00:00:00 2001
From: "matthias@kaehlcke.net" <matthias@kaehlcke.net>
Date: Sat, 31 May 2008 15:28:09 +0200
Subject: [MTD] use list_for_each_entry() in add_mtd_device()

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/mtdcore.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index f7e7890e5bc..4c102f12346 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -53,7 +53,7 @@ int add_mtd_device(struct mtd_info *mtd)
 
 	for (i=0; i < MAX_MTD_DEVICES; i++)
 		if (!mtd_table[i]) {
-			struct list_head *this;
+			struct mtd_notifier *not;
 
 			mtd_table[i] = mtd;
 			mtd->index = i;
@@ -72,8 +72,7 @@ int add_mtd_device(struct mtd_info *mtd)
 			DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
 			/* No need to get a refcount on the module containing
 			   the notifier, since we hold the mtd_table_mutex */
-			list_for_each(this, &mtd_notifiers) {
-				struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+			list_for_each_entry(not, &mtd_notifiers, list) {
 				not->add(mtd);
 			}
 
-- 
cgit v1.2.3


From 856613c98c2f864994d5fb33a62b7a468f68ab9b Mon Sep 17 00:00:00 2001
From: "matthias@kaehlcke.net" <matthias@kaehlcke.net>
Date: Sat, 31 May 2008 15:28:10 +0200
Subject: [MTD] use list_for_each_entry() in del_mtd_device()

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/mtdcore.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 4c102f12346..8c61035b968 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -112,12 +112,11 @@ int del_mtd_device (struct mtd_info *mtd)
 		       mtd->index, mtd->name, mtd->usecount);
 		ret = -EBUSY;
 	} else {
-		struct list_head *this;
+		struct mtd_notifier *not;
 
 		/* No need to get a refcount on the module containing
 		   the notifier, since we hold the mtd_table_mutex */
-		list_for_each(this, &mtd_notifiers) {
-			struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+		list_for_each_entry(not, &mtd_notifiers, list) {
 			not->remove(mtd);
 		}
 
-- 
cgit v1.2.3


From e9d42227bdc96238676bd28feca5815fcff2d6a8 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Tue, 3 Jun 2008 12:26:05 +0800
Subject: [MTD] DataFlash: fix bug - ATMEL AT45DF321D spi flash card fails to
 be copied to (v2)

 - Add support for binary page size DataFlashes.
 - The driver now prints out pagesize and erasesize.
   Printout valuable information for creating flash filesystems.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/devices/mtd_dataflash.c | 117 ++++++++++++++++++++++++++++++++++--
 1 file changed, 112 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index b35e4813a3a..acc3728872e 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -487,7 +487,9 @@ add_dataflash(struct spi_device *spi, char *name,
 	device->write = dataflash_write;
 	device->priv = priv;
 
-	dev_info(&spi->dev, "%s (%d KBytes)\n", name, device->size/1024);
+	dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, "
+		"erasesize %d bytes\n", name, device->size/1024,
+		 pagesize, pagesize * 8);	/* 8 pages = 1 block */
 	dev_set_drvdata(&spi->dev, priv);
 
 	if (mtd_has_partitions()) {
@@ -521,7 +523,7 @@ add_dataflash(struct spi_device *spi, char *name,
  *
  *   Device      Density         ID code          #Pages PageSize  Offset
  *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
- *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1025    264      9
+ *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
  *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
  *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
  *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
@@ -529,9 +531,114 @@ add_dataflash(struct spi_device *spi, char *name,
  *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
  *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
  */
+
+struct flash_info {
+	char		*name;
+
+	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
+	 * a high byte of zero plus three data bytes: the manufacturer id,
+	 * then a two byte device id.
+	 */
+	u32		jedec_id;
+
+	/* The size listed here is what works with OPCODE_SE, which isn't
+	 * necessarily called a "sector" by the vendor.
+	 */
+	unsigned	nr_pages;
+	u16		pagesize;
+	u16		pageoffset;
+
+	u16		flags;
+#define	SUP_POW2PS	0x02
+#define	IS_POW2PS	0x01
+};
+
+static struct flash_info __devinitdata dataflash_data [] = {
+
+	{ "at45db011d",  0x1f2200, 512, 264, 9, SUP_POW2PS},
+	{ "at45db011d",  0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db021d",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
+	{ "at45db021d",  0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db041d",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
+	{ "at45db041d",  0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db081d",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
+	{ "at45db081d",  0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db161d",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
+	{ "at45db161d",  0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db321c",  0x1f2700, 8192, 528, 10, },
+
+	{ "at45db321d",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
+	{ "at45db321d",  0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db641d",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+	{ "at45db641d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+};
+
+static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+{
+	int			tmp;
+	u8			code = OP_READ_ID;
+	u8			id[3];
+	u32			jedec;
+	struct flash_info	*info;
+	int status;
+
+
+	/* JEDEC also defines an optional "extended device information"
+	 * string for after vendor-specific data, after the three bytes
+	 * we use here.  Supporting some chips might require using it.
+	 */
+	tmp = spi_write_then_read(spi, &code, 1, id, 3);
+	if (tmp < 0) {
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+			spi->dev.bus_id, tmp);
+		return NULL;
+	}
+	jedec = id[0];
+	jedec = jedec << 8;
+	jedec |= id[1];
+	jedec = jedec << 8;
+	jedec |= id[2];
+
+	for (tmp = 0, info = dataflash_data;
+			tmp < ARRAY_SIZE(dataflash_data);
+			tmp++, info++) {
+		if (info->jedec_id == jedec) {
+			if (info->flags & SUP_POW2PS) {
+				status = dataflash_status(spi);
+				if (status & 0x1)
+					/* return power of 2 pagesize */
+					return ++info;
+				else
+					return info;
+			}
+		}
+	}
+	return NULL;
+}
+
 static int __devinit dataflash_probe(struct spi_device *spi)
 {
 	int status;
+	struct flash_info	*info;
+
+	/*
+	 * Try to detect dataflash by JEDEC ID.
+	 * If it succeeds we know we have either a C or D part.
+	 * D will support power of 2 pagesize option.
+	 */
+
+	info = jedec_probe(spi);
+
+	if (info != NULL)
+		return add_dataflash(spi, info->name, info->nr_pages,
+				 info->pagesize, info->pageoffset);
+
 
 	status = dataflash_status(spi);
 	if (status <= 0 || status == 0xff) {
@@ -551,16 +658,16 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 		status = add_dataflash(spi, "AT45DB011B", 512, 264, 9);
 		break;
 	case 0x14:	/* 0 1 0 1 x x */
-		status = add_dataflash(spi, "AT45DB021B", 1025, 264, 9);
+		status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
 		break;
 	case 0x1c:	/* 0 1 1 1 x x */
-		status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
+		status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9);
 		break;
 	case 0x24:	/* 1 0 0 1 x x */
 		status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9);
 		break;
 	case 0x2c:	/* 1 0 1 1 x x */
-		status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10);
+		status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10);
 		break;
 	case 0x34:	/* 1 1 0 1 x x */
 		status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10);
-- 
cgit v1.2.3


From 271c5c59e00302494ffc299741e7fa2d63103e76 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Wed, 4 Jun 2008 17:43:22 +0100
Subject: [MTD] DataFlash: use proper types

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/devices/mtd_dataflash.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index acc3728872e..54e36bfc2c3 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -82,7 +82,7 @@
 
 
 struct dataflash {
-	u8			command[4];
+	uint8_t			command[4];
 	char			name[24];
 
 	unsigned		partitioned:1;
@@ -150,7 +150,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 	struct spi_transfer	x = { .tx_dma = 0, };
 	struct spi_message	msg;
 	unsigned		blocksize = priv->page_size << 3;
-	u8			*command;
+	uint8_t			*command;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n",
 			spi->dev.bus_id,
@@ -182,8 +182,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 		pageaddr = pageaddr << priv->page_offset;
 
 		command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
-		command[1] = (u8)(pageaddr >> 16);
-		command[2] = (u8)(pageaddr >> 8);
+		command[1] = (uint8_t)(pageaddr >> 16);
+		command[2] = (uint8_t)(pageaddr >> 8);
 		command[3] = 0;
 
 		DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
@@ -234,7 +234,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	struct spi_transfer	x[2] = { { .tx_dma = 0, }, };
 	struct spi_message	msg;
 	unsigned int		addr;
-	u8			*command;
+	uint8_t			*command;
 	int			status;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
@@ -274,9 +274,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	 * fewer "don't care" bytes.  Both buffers stay unchanged.
 	 */
 	command[0] = OP_READ_CONTINUOUS;
-	command[1] = (u8)(addr >> 16);
-	command[2] = (u8)(addr >> 8);
-	command[3] = (u8)(addr >> 0);
+	command[1] = (uint8_t)(addr >> 16);
+	command[2] = (uint8_t)(addr >> 8);
+	command[3] = (uint8_t)(addr >> 0);
 	/* plus 4 "don't care" bytes */
 
 	status = spi_sync(priv->spi, &msg);
@@ -311,7 +311,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	size_t			remaining = len;
 	u_char			*writebuf = (u_char *) buf;
 	int			status = -EINVAL;
-	u8			*command;
+	uint8_t			*command;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
 		spi->dev.bus_id, (unsigned)to, (unsigned)(to + len));
@@ -539,16 +539,16 @@ struct flash_info {
 	 * a high byte of zero plus three data bytes: the manufacturer id,
 	 * then a two byte device id.
 	 */
-	u32		jedec_id;
+	uint32_t	jedec_id;
 
 	/* The size listed here is what works with OPCODE_SE, which isn't
 	 * necessarily called a "sector" by the vendor.
 	 */
 	unsigned	nr_pages;
-	u16		pagesize;
-	u16		pageoffset;
+	uint16_t	pagesize;
+	uint16_t	pageoffset;
 
-	u16		flags;
+	uint16_t	flags;
 #define	SUP_POW2PS	0x02
 #define	IS_POW2PS	0x01
 };
@@ -582,9 +582,9 @@ static struct flash_info __devinitdata dataflash_data [] = {
 static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 {
 	int			tmp;
-	u8			code = OP_READ_ID;
-	u8			id[3];
-	u32			jedec;
+	uint8_t			code = OP_READ_ID;
+	uint8_t			id[3];
+	uint32_t		jedec;
 	struct flash_info	*info;
 	int status;
 
-- 
cgit v1.2.3


From 83973b87938a06a2af7e2a7fd1b630c35f8baff4 Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kyungmin.park@samsung.com>
Date: Thu, 29 May 2008 14:52:40 +0900
Subject: [MTD] [OneNAND] Check the ECC status first instead of controller

To get the correct information in case of power off recovery,
it should read ECC status first
Also remove previous workaround method.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/onenand/onenand_base.c | 54 ++++++++++++++++++--------------------
 1 file changed, 25 insertions(+), 29 deletions(-)

diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 5d7965f7e9c..926cf3a4135 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -325,28 +325,11 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 
 	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
-	if (ctrl & ONENAND_CTRL_ERROR) {
-		printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n", ctrl);
-		if (ctrl & ONENAND_CTRL_LOCK)
-			printk(KERN_ERR "onenand_wait: it's locked error.\n");
-		if (state == FL_READING) {
-			/*
-			 * A power loss while writing can result in a page
-			 * becoming unreadable.  When the device is mounted
-			 * again, reading that page gives controller errors.
-			 * Upper level software like JFFS2 treat -EIO as fatal,
-			 * refusing to mount at all.  That means it is necessary
-			 * to treat the error as an ECC error to allow recovery.
-			 * Note that typically in this case, the eraseblock can
-			 * still be erased and rewritten i.e. it has not become
-			 * a bad block.
-			 */
-			mtd->ecc_stats.failed++;
-			return -EBADMSG;
-		}
-		return -EIO;
-	}
-
+	/*
+	 * In the Spec. it checks the controller status first
+	 * However if you get the correct information in case of
+	 * power off recovery (POR) test, it should read ECC status first
+	 */
 	if (interrupt & ONENAND_INT_READ) {
 		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
 		if (ecc) {
@@ -364,6 +347,15 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 		return -EIO;
 	}
 
+	/* If there's controller error, it's a real error */
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n",
+			ctrl);
+		if (ctrl & ONENAND_CTRL_LOCK)
+			printk(KERN_ERR "onenand_wait: it's locked error.\n");
+		return -EIO;
+	}
+
 	return 0;
 }
 
@@ -1135,22 +1127,26 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
 	interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
 	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
-	/* Initial bad block case: 0x2400 or 0x0400 */
-	if (ctrl & ONENAND_CTRL_ERROR) {
-		printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
-		return ONENAND_BBT_READ_ERROR;
-	}
-
 	if (interrupt & ONENAND_INT_READ) {
 		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
-		if (ecc & ONENAND_ECC_2BIT_ALL)
+		if (ecc & ONENAND_ECC_2BIT_ALL) {
+			printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
+				", controller error 0x%04x\n", ecc, ctrl);
 			return ONENAND_BBT_READ_ERROR;
+		}
 	} else {
 		printk(KERN_ERR "onenand_bbt_wait: read timeout!"
 			"ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
 		return ONENAND_BBT_READ_FATAL_ERROR;
 	}
 
+	/* Initial bad block case: 0x2400 or 0x0400 */
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		printk(KERN_DEBUG "onenand_bbt_wait: "
+			"controller error = 0x%04x\n", ctrl);
+		return ONENAND_BBT_READ_ERROR;
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From af3deccfa67341a9df39b6f734afcc85998ad4b7 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Fri, 30 May 2008 15:56:18 +0300
Subject: [MTD] [NAND] nandsim: fix size bug

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/nandsim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index bb885d1fcab..b28d76013ab 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -511,7 +511,7 @@ static int init_nandsim(struct mtd_info *mtd)
 	}
 
 	if (ns->options & OPT_SMALLPAGE) {
-		if (ns->geom.totsz < (32 << 20)) {
+		if (ns->geom.totsz <= (32 << 20)) {
 			ns->geom.pgaddrbytes  = 3;
 			ns->geom.secaddrbytes = 2;
 		} else {
-- 
cgit v1.2.3


From 07293b20083cb66df35bf2041f0c554eaac43e8c Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Fri, 30 May 2008 15:56:23 +0300
Subject: [MTD] [NAND] nandsim: fix overridesize

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/nandsim.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index b28d76013ab..b4805168473 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -2022,6 +2022,7 @@ static int __init ns_init_module(void)
 		nsmtd->size = new_size;
 		chip->chipsize = new_size;
 		chip->chip_shift = ffs(new_size) - 1;
+		chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
 	}
 
 	if ((retval = setup_wear_reporting(nsmtd)) != 0)
-- 
cgit v1.2.3


From 6eda7a55f786b75e7d3d636a9431e6c850b20d72 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Fri, 30 May 2008 15:56:26 +0300
Subject: [MTD] [NAND] nandsim: allow for 64-bit size

Amend nandsim so that it does not assume 32-bit flash size.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/nandsim.c | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index b4805168473..68c150c8ff9 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -298,11 +298,11 @@ struct nandsim {
 
 	/* NAND flash "geometry" */
 	struct nandsin_geometry {
-		uint32_t totsz;     /* total flash size, bytes */
+		uint64_t totsz;     /* total flash size, bytes */
 		uint32_t secsz;     /* flash sector (erase block) size, bytes */
 		uint pgsz;          /* NAND flash page size, bytes */
 		uint oobsz;         /* page OOB area size, bytes */
-		uint32_t totszoob;  /* total flash size including OOB, bytes */
+		uint64_t totszoob;  /* total flash size including OOB, bytes */
 		uint pgszoob;       /* page size including OOB , bytes*/
 		uint secszoob;      /* sector size including OOB, bytes */
 		uint pgnum;         /* total number of pages */
@@ -459,6 +459,12 @@ static char *get_partition_name(int i)
 	return kstrdup(buf, GFP_KERNEL);
 }
 
+static u_int64_t divide(u_int64_t n, u_int32_t d)
+{
+	do_div(n, d);
+	return n;
+}
+
 /*
  * Initialize the nandsim structure.
  *
@@ -469,8 +475,8 @@ static int init_nandsim(struct mtd_info *mtd)
 	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
 	struct nandsim   *ns   = (struct nandsim *)(chip->priv);
 	int i, ret = 0;
-	u_int32_t remains;
-	u_int32_t next_offset;
+	u_int64_t remains;
+	u_int64_t next_offset;
 
 	if (NS_IS_INITIALIZED(ns)) {
 		NS_ERR("init_nandsim: nandsim is already initialized\n");
@@ -487,8 +493,8 @@ static int init_nandsim(struct mtd_info *mtd)
 	ns->geom.oobsz    = mtd->oobsize;
 	ns->geom.secsz    = mtd->erasesize;
 	ns->geom.pgszoob  = ns->geom.pgsz + ns->geom.oobsz;
-	ns->geom.pgnum    = ns->geom.totsz / ns->geom.pgsz;
-	ns->geom.totszoob = ns->geom.totsz + ns->geom.pgnum * ns->geom.oobsz;
+	ns->geom.pgnum    = divide(ns->geom.totsz, ns->geom.pgsz);
+	ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
 	ns->geom.secshift = ffs(ns->geom.secsz) - 1;
 	ns->geom.pgshift  = chip->page_shift;
 	ns->geom.oobshift = ffs(ns->geom.oobsz) - 1;
@@ -537,15 +543,16 @@ static int init_nandsim(struct mtd_info *mtd)
 	remains = ns->geom.totsz;
 	next_offset = 0;
 	for (i = 0; i < parts_num; ++i) {
-		unsigned long part = parts[i];
-		if (!part || part > remains / ns->geom.secsz) {
+		u_int64_t part_sz = (u_int64_t)parts[i] * ns->geom.secsz;
+
+		if (!part_sz || part_sz > remains) {
 			NS_ERR("bad partition size.\n");
 			ret = -EINVAL;
 			goto error;
 		}
 		ns->partitions[i].name   = get_partition_name(i);
 		ns->partitions[i].offset = next_offset;
-		ns->partitions[i].size   = part * ns->geom.secsz;
+		ns->partitions[i].size   = part_sz;
 		next_offset += ns->partitions[i].size;
 		remains -= ns->partitions[i].size;
 	}
@@ -573,7 +580,7 @@ static int init_nandsim(struct mtd_info *mtd)
 	if (ns->busw == 16)
 		NS_WARN("16-bit flashes support wasn't tested\n");
 
-	printk("flash size: %u MiB\n",          ns->geom.totsz >> 20);
+	printk("flash size: %llu MiB\n",        ns->geom.totsz >> 20);
 	printk("page size: %u bytes\n",         ns->geom.pgsz);
 	printk("OOB area size: %u bytes\n",     ns->geom.oobsz);
 	printk("sector size: %u KiB\n",         ns->geom.secsz >> 10);
@@ -583,7 +590,7 @@ static int init_nandsim(struct mtd_info *mtd)
 	printk("bits in sector size: %u\n",     ns->geom.secshift);
 	printk("bits in page size: %u\n",       ns->geom.pgshift);
 	printk("bits in OOB size: %u\n",        ns->geom.oobshift);
-	printk("flash size with OOB: %u KiB\n", ns->geom.totszoob >> 10);
+	printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10);
 	printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
 	printk("sector address bytes: %u\n",    ns->geom.secaddrbytes);
 	printk("options: %#x\n",                ns->options);
@@ -825,7 +832,7 @@ static int setup_wear_reporting(struct mtd_info *mtd)
 
 	if (!rptwear)
 		return 0;
-	wear_eb_count = mtd->size / mtd->erasesize;
+	wear_eb_count = divide(mtd->size, mtd->erasesize);
 	mem = wear_eb_count * sizeof(unsigned long);
 	if (mem / sizeof(unsigned long) != wear_eb_count) {
 		NS_ERR("Too many erase blocks for wear reporting\n");
@@ -2013,7 +2020,7 @@ static int __init ns_init_module(void)
 	}
 
 	if (overridesize) {
-		u_int32_t new_size = nsmtd->erasesize << overridesize;
+		u_int64_t new_size = (u_int64_t)nsmtd->erasesize << overridesize;
 		if (new_size >> overridesize != nsmtd->erasesize) {
 			NS_ERR("overridesize is too big\n");
 			goto err_exit;
@@ -2021,7 +2028,7 @@ static int __init ns_init_module(void)
 		/* N.B. This relies on nand_scan not doing anything with the size before we change it */
 		nsmtd->size = new_size;
 		chip->chipsize = new_size;
-		chip->chip_shift = ffs(new_size) - 1;
+		chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
 		chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
 	}
 
-- 
cgit v1.2.3


From 59018b6d2acabb114ab58637e6ab95ba424a89d0 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 20 May 2008 01:03:52 +0300
Subject: MTD/JFFS2: remove CVS keywords

Once upon a time, the MTD repository was using CVS.

This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.

This also includes code that printed them to the user.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/Kconfig                 | 2 --
 drivers/mtd/afs.c                   | 2 --
 drivers/mtd/chips/cfi_cmdset_0001.c | 2 --
 drivers/mtd/chips/cfi_cmdset_0002.c | 3 ---
 drivers/mtd/chips/cfi_cmdset_0020.c | 2 --
 drivers/mtd/chips/cfi_probe.c       | 1 -
 drivers/mtd/chips/cfi_util.c        | 3 ---
 drivers/mtd/chips/chipreg.c         | 2 --
 drivers/mtd/chips/gen_probe.c       | 1 -
 drivers/mtd/chips/jedec_probe.c     | 1 -
 drivers/mtd/chips/map_absent.c      | 1 -
 drivers/mtd/chips/map_ram.c         | 1 -
 drivers/mtd/chips/map_rom.c         | 1 -
 drivers/mtd/cmdlinepart.c           | 2 --
 drivers/mtd/devices/Kconfig         | 1 -
 drivers/mtd/devices/Makefile        | 1 -
 drivers/mtd/devices/block2mtd.c     | 6 ------
 drivers/mtd/devices/doc2000.c       | 2 --
 drivers/mtd/devices/doc2001.c       | 2 --
 drivers/mtd/devices/doc2001plus.c   | 2 --
 drivers/mtd/devices/docecc.c        | 2 --
 drivers/mtd/devices/docprobe.c      | 3 ---
 drivers/mtd/devices/lart.c          | 2 --
 drivers/mtd/devices/ms02-nv.c       | 2 --
 drivers/mtd/devices/ms02-nv.h       | 2 --
 drivers/mtd/devices/mtdram.c        | 1 -
 drivers/mtd/devices/phram.c         | 2 --
 drivers/mtd/devices/pmc551.c        | 2 --
 drivers/mtd/devices/slram.c         | 2 --
 drivers/mtd/ftl.c                   | 3 ---
 drivers/mtd/inftlcore.c             | 5 -----
 drivers/mtd/inftlmount.c            | 4 ----
 drivers/mtd/maps/Kconfig            | 1 -
 drivers/mtd/maps/Makefile           | 1 -
 drivers/mtd/maps/amd76xrom.c        | 1 -
 drivers/mtd/maps/autcpu12-nvram.c   | 2 --
 drivers/mtd/maps/bast-flash.c       | 2 --
 drivers/mtd/maps/cdb89712.c         | 1 -
 drivers/mtd/maps/ceiva.c            | 1 -
 drivers/mtd/maps/cfi_flagadm.c      | 2 --
 drivers/mtd/maps/dbox2-flash.c      | 2 --
 drivers/mtd/maps/dc21285.c          | 2 --
 drivers/mtd/maps/dilnetpc.c         | 2 --
 drivers/mtd/maps/dmv182.c           | 2 --
 drivers/mtd/maps/ebony.c            | 2 --
 drivers/mtd/maps/edb7312.c          | 2 --
 drivers/mtd/maps/fortunet.c         | 1 -
 drivers/mtd/maps/h720x-flash.c      | 2 --
 drivers/mtd/maps/ichxrom.c          | 1 -
 drivers/mtd/maps/impa7.c            | 2 --
 drivers/mtd/maps/integrator-flash.c | 2 --
 drivers/mtd/maps/ipaq-flash.c       | 2 --
 drivers/mtd/maps/ixp2000.c          | 2 --
 drivers/mtd/maps/ixp4xx.c           | 2 --
 drivers/mtd/maps/l440gx.c           | 2 --
 drivers/mtd/maps/map_funcs.c        | 2 --
 drivers/mtd/maps/mbx860.c           | 2 --
 drivers/mtd/maps/mtx-1_flash.c      | 2 --
 drivers/mtd/maps/netsc520.c         | 2 --
 drivers/mtd/maps/nettel.c           | 2 --
 drivers/mtd/maps/octagon-5066.c     | 1 -
 drivers/mtd/maps/omap-toto-flash.c  | 2 --
 drivers/mtd/maps/pci.c              | 2 --
 drivers/mtd/maps/pcmciamtd.c        | 5 +----
 drivers/mtd/maps/physmap.c          | 2 --
 drivers/mtd/maps/plat-ram.c         | 2 --
 drivers/mtd/maps/redwood.c          | 2 --
 drivers/mtd/maps/rpxlite.c          | 2 --
 drivers/mtd/maps/sa1100-flash.c     | 2 --
 drivers/mtd/maps/sbc8240.c          | 3 ---
 drivers/mtd/maps/sbc_gxx.c          | 2 --
 drivers/mtd/maps/sc520cdp.c         | 2 --
 drivers/mtd/maps/scb2_flash.c       | 1 -
 drivers/mtd/maps/scx200_docflash.c  | 2 --
 drivers/mtd/maps/sharpsl-flash.c    | 2 --
 drivers/mtd/maps/solutionengine.c   | 2 --
 drivers/mtd/maps/sun_uflash.c       | 2 +-
 drivers/mtd/maps/tqm8xxl.c          | 2 --
 drivers/mtd/maps/ts5500_flash.c     | 2 --
 drivers/mtd/maps/tsunami_flash.c    | 1 -
 drivers/mtd/maps/uclinux.c          | 2 --
 drivers/mtd/maps/vmax301.c          | 1 -
 drivers/mtd/maps/walnut.c           | 2 --
 drivers/mtd/maps/wr_sbc82xx_flash.c | 2 --
 drivers/mtd/mtd_blkdevs.c           | 2 --
 drivers/mtd/mtdblock.c              | 2 --
 drivers/mtd/mtdblock_ro.c           | 2 --
 drivers/mtd/mtdchar.c               | 2 --
 drivers/mtd/mtdconcat.c             | 2 --
 drivers/mtd/mtdcore.c               | 2 --
 drivers/mtd/mtdpart.c               | 2 --
 drivers/mtd/nand/Kconfig            | 1 -
 drivers/mtd/nand/Makefile           | 1 -
 drivers/mtd/nand/au1550nd.c         | 2 --
 drivers/mtd/nand/autcpu12.c         | 2 --
 drivers/mtd/nand/diskonchip.c       | 2 --
 drivers/mtd/nand/edb7312.c          | 2 --
 drivers/mtd/nand/h1910.c            | 2 --
 drivers/mtd/nand/nand_bbt.c         | 2 --
 drivers/mtd/nand/nand_ecc.c         | 2 --
 drivers/mtd/nand/nand_ids.c         | 2 --
 drivers/mtd/nand/nandsim.c          | 2 --
 drivers/mtd/nand/ppchameleonevb.c   | 2 --
 drivers/mtd/nand/rtc_from4.c        | 2 --
 drivers/mtd/nand/s3c2410.c          | 2 --
 drivers/mtd/nand/sharpsl.c          | 2 --
 drivers/mtd/nand/spia.c             | 2 --
 drivers/mtd/nand/toto.c             | 2 --
 drivers/mtd/nand/ts7250.c           | 2 --
 drivers/mtd/nftlcore.c              | 5 -----
 drivers/mtd/nftlmount.c             | 4 ----
 drivers/mtd/redboot.c               | 2 --
 drivers/mtd/rfd_ftl.c               | 2 --
 include/linux/jffs2.h               | 3 ---
 include/linux/mtd/blktrans.h        | 2 --
 include/linux/mtd/cfi.h             | 1 -
 include/linux/mtd/cfi_endian.h      | 5 -----
 include/linux/mtd/concat.h          | 2 --
 include/linux/mtd/doc2000.h         | 2 --
 include/linux/mtd/flashchip.h       | 3 ---
 include/linux/mtd/ftl.h             | 2 --
 include/linux/mtd/gen_probe.h       | 1 -
 include/linux/mtd/inftl.h           | 4 ----
 include/linux/mtd/map.h             | 1 -
 include/linux/mtd/mtd.h             | 2 --
 include/linux/mtd/nand.h            | 2 --
 include/linux/mtd/nand_ecc.h        | 2 --
 include/linux/mtd/nftl.h            | 2 --
 include/linux/mtd/partitions.h      | 2 --
 include/linux/mtd/physmap.h         | 2 --
 include/linux/mtd/plat-ram.h        | 2 --
 include/linux/mtd/pmc551.h          | 4 +---
 include/linux/mtd/xip.h             | 2 --
 include/mtd/inftl-user.h            | 2 --
 include/mtd/jffs2-user.h            | 2 --
 include/mtd/mtd-abi.h               | 2 --
 include/mtd/mtd-user.h              | 2 --
 include/mtd/nftl-user.h             | 2 --
 138 files changed, 3 insertions(+), 279 deletions(-)

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index eed06d068fd..14f11f8b9e5 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,5 +1,3 @@
-# $Id: Kconfig,v 1.11 2005/11/07 11:14:19 gleixner Exp $
-
 menuconfig MTD
 	tristate "Memory Technology Device (MTD) support"
 	depends on HAS_IOMEM
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index 52d51eb91c1..d072ca5be68 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -21,8 +21,6 @@
    This is access code for flashes using ARM's flash partitioning
    standards.
 
-   $Id: afs.c,v 1.15 2005/11/07 11:14:19 gleixner Exp $
-
 ======================================================================*/
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index cc6b7bb6de0..324ff82a3cd 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -4,8 +4,6 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0001.c,v 1.186 2005/11/23 22:07:52 nico Exp $
- *
  *
  * 10/10/2000	Nicolas Pitre <nico@cam.org>
  * 	- completely revamped method functions so they are aware and
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index f7fcc638953..a972cc6be43 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -16,9 +16,6 @@
  * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
  *
  * This code is GPL
- *
- * $Id: cfi_cmdset_0002.c,v 1.122 2005/11/07 11:14:22 gleixner Exp $
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index 1b720cc571f..d4714dd9f7a 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -4,8 +4,6 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0020.c,v 1.22 2005/11/07 11:14:22 gleixner Exp $
- *
  * 10/10/2000	Nicolas Pitre <nico@cam.org>
  * 	- completely revamped method functions so they are aware and
  * 	  independent of the flash geometry (buswidth, interleave, etc.)
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index a4463a91ce3..c418e92e1d9 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -1,7 +1,6 @@
 /*
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
 */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 72e0022a47b..0ee45701801 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -6,9 +6,6 @@
  * Copyright (C) 2003 STMicroelectronics Limited
  *
  * This code is covered by the GPL.
- *
- * $Id: cfi_util.c,v 1.10 2005/11/07 11:14:23 gleixner Exp $
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c
index 2174c97549f..c8576096822 100644
--- a/drivers/mtd/chips/chipreg.c
+++ b/drivers/mtd/chips/chipreg.c
@@ -1,6 +1,4 @@
 /*
- * $Id: chipreg.c,v 1.17 2004/11/16 18:29:00 dwmw2 Exp $
- *
  * Registration for chip drivers
  *
  */
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index d338b8c9278..e53a58ae384 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -2,7 +2,6 @@
  * Routines common to all CFI-type probes.
  * (C) 2001-2003 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.c,v 1.24 2005/11/07 11:14:23 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index b229da8060d..afb35e3a3ce 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1,7 +1,6 @@
 /*
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: jedec_probe.c,v 1.66 2005/11/07 11:14:23 gleixner Exp $
    See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5)
    for the standard this probe goes back to.
 
diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c
index fc478c0f93f..494d30d0631 100644
--- a/drivers/mtd/chips/map_absent.c
+++ b/drivers/mtd/chips/map_absent.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle absent "placeholder" devices
  * Copyright 2001 Resilience Corporation <ebrower@resilience.com>
- * $Id: map_absent.c,v 1.6 2005/11/07 11:14:23 gleixner Exp $
  *
  * This map driver is used to allocate "placeholder" MTD
  * devices on systems that have socketed/removable media.
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index 5cb6d526366..072dd8abf33 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle map devices which are simple RAM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_ram.c,v 1.22 2005/01/05 18:05:12 dwmw2 Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index cb27f855074..821d0ed6bae 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle map devices which are simple ROM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_rom.c,v 1.23 2005/01/05 18:05:12 dwmw2 Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index e472a0e9de9..68782ab2f0d 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -1,6 +1,4 @@
 /*
- * $Id: cmdlinepart.c,v 1.19 2005/11/07 11:14:19 gleixner Exp $
- *
  * Read flash partition table from command line
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 35ed1103dbb..9c613f06623 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.18 2005/11/07 11:14:24 gleixner Exp $
 
 menu "Self-contained MTD device drivers"
 	depends on MTD!=n
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 0f788d5c4bf..0993d5cf392 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/devices/Makefile
 #
-# $Id: Makefile.common,v 1.7 2004/12/22 17:51:15 joern Exp $
 
 obj-$(CONFIG_MTD_DOC2000)	+= doc2000.o
 obj-$(CONFIG_MTD_DOC2001)	+= doc2001.o
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 519d942e794..303ea9b8cfe 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: block2mtd.c,v 1.30 2005/11/29 14:48:32 gleixner Exp $
- *
  * block2mtd.c - create an mtd from a block device
  *
  * Copyright (C) 2001,2002	Simon Evans <spse@secret.org.uk>
@@ -20,9 +18,6 @@
 #include <linux/mutex.h>
 #include <linux/mount.h>
 
-#define VERSION "$Revision: 1.30 $"
-
-
 #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
 #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
 
@@ -451,7 +446,6 @@ MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
 static int __init block2mtd_init(void)
 {
 	int ret = 0;
-	INFO("version " VERSION);
 
 #ifndef MODULE
 	if (strlen(block2mtd_paramline))
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index 846989f292e..50de839c77a 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -3,8 +3,6 @@
  * Linux driver for Disk-On-Chip 2000 and Millennium
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- *
- * $Id: doc2000.c,v 1.67 2005/11/07 11:14:24 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index 6413efc045e..e32c568c114 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -3,8 +3,6 @@
  * Linux driver for Disk-On-Chip Millennium
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- *
- * $Id: doc2001.c,v 1.49 2005/11/07 11:14:24 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 83be3461658..d853f891b58 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -6,8 +6,6 @@
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
  *
- * $Id: doc2001plus.c,v 1.14 2005/11/07 11:14:24 gleixner Exp $
- *
  * Released under GPL
  */
 
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index fd8a8daba3a..874e51b110a 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -7,8 +7,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: docecc.c,v 1.7 2005/11/07 11:14:25 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index d8cc94ec4e5..6e5d811ae83 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -4,9 +4,6 @@
 /* (C) 1999 Machine Vision Holdings, Inc.			*/
 /* (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>		*/
 
-/* $Id: docprobe.c,v 1.46 2005/11/07 11:14:25 gleixner Exp $	*/
-
-
 
 /* DOC_PASSIVE_PROBE:
    In order to ensure that the BIOS checksum is correct at boot time, and
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 1d324e5c412..f4bda4cee49 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -2,8 +2,6 @@
 /*
  * MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART.
  *
- * $Id: lart.c,v 1.9 2005/11/07 11:14:25 gleixner Exp $
- *
  * Author: Abraham vd Merwe <abraham@2d3d.co.za>
  *
  * Copyright (c) 2001, 2d3D, Inc.
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 9cff119a202..6a9a24a80a6 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -5,8 +5,6 @@
  *	modify it under the terms of the GNU General Public License
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
- *
- *	$Id: ms02-nv.c,v 1.11 2005/11/14 13:41:47 macro Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/devices/ms02-nv.h b/drivers/mtd/devices/ms02-nv.h
index 8a6eef7cfee..04deafd3a77 100644
--- a/drivers/mtd/devices/ms02-nv.h
+++ b/drivers/mtd/devices/ms02-nv.h
@@ -9,8 +9,6 @@
  *	modify it under the terms of the GNU General Public License
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
- *
- *	$Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $
  */
 
 #include <linux/ioport.h>
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index 0399be17862..3aaca88847d 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -1,6 +1,5 @@
 /*
  * mtdram - a test mtd device
- * $Id: mtdram.c,v 1.37 2005/04/21 03:42:11 joern Exp $
  * Author: Alexander Larsson <alex@cendio.se>
  *
  * Copyright (c) 1999 Alexander Larsson <alex@cendio.se>
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index c7987b1c5e0..088fbb7595b 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -1,6 +1,4 @@
 /**
- * $Id: phram.c,v 1.16 2005/11/07 11:14:25 gleixner Exp $
- *
  * Copyright (c) ????		Jochen Schäuble <psionic@psionic.de>
  * Copyright (c) 2003-2004	Joern Engel <joern@wh.fh-wedel.de>
  *
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index bc998174906..d38bca64bb1 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -1,6 +1,4 @@
 /*
- * $Id: pmc551.c,v 1.32 2005/11/07 11:14:25 gleixner Exp $
- *
  * PMC551 PCI Mezzanine Ram Device
  *
  * Author:
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index cb86db746f2..a425d09f35a 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -1,7 +1,5 @@
 /*======================================================================
 
-  $Id: slram.c,v 1.36 2005/11/07 11:14:25 gleixner Exp $
-
   This driver provides a method to access memory not used by the kernel
   itself (i.e. if the kernel commandline mem=xxx is used). To actually
   use slram at least mtdblock or mtdchar is required (for block or
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 4a79b187b56..3fed8f94ac6 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -1,5 +1,4 @@
 /* This version ported to the Linux-MTD system by dwmw2@infradead.org
- * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $
  *
  * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
  * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
@@ -1082,8 +1081,6 @@ static struct mtd_blktrans_ops ftl_tr = {
 
 static int init_ftl(void)
 {
-	DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n");
-
 	return register_mtd_blktrans(&ftl_tr);
 }
 
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index b0e396504e6..c4f9d3378b2 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -7,8 +7,6 @@
  * (c) 1999 Machine Vision Holdings, Inc.
  * Author: David Woodhouse <dwmw2@infradead.org>
  *
- * $Id: inftlcore.c,v 1.19 2005/11/07 11:14:20 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -953,9 +951,6 @@ static struct mtd_blktrans_ops inftl_tr = {
 
 static int __init init_inftl(void)
 {
-	printk(KERN_INFO "INFTL: inftlcore.c $Revision: 1.19 $, "
-		"inftlmount.c %s\n", inftlmountrev);
-
 	return register_mtd_blktrans(&inftl_tr);
 }
 
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index c551d2f0779..9113628ed1e 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -8,8 +8,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: inftlmount.c,v 1.18 2005/11/07 11:14:20 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -39,8 +37,6 @@
 #include <linux/mtd/inftl.h>
 #include <linux/mtd/compatmac.h>
 
-char inftlmountrev[]="$Revision: 1.18 $";
-
 /*
  * find_boot_record: Find the INFTL Media Header and its Spare copy which
  *	contains the various device information of the INFTL partition and
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 1bd69aa9e22..b2c18024561 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.61 2005/11/07 11:14:26 gleixner Exp $
 
 menu "Mapping drivers for chip access"
 	depends on MTD!=n
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index a9cbe80f99a..5444eaf4026 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.34 2005/11/07 11:14:26 gleixner Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)		+= map_funcs.o
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 728aed6ad72..948b86f35ef 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -2,7 +2,6 @@
  * amd76xrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: amd76xrom.c,v 1.21 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index 7ed3424dd95..cf32267263d 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -2,8 +2,6 @@
  * NV-RAM memory access on autcpu12
  * (C) 2002 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: autcpu12-nvram.c,v 1.9 2005/11/07 11:14:26 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
index 1f492062f8c..ca541488034 100644
--- a/drivers/mtd/maps/bast-flash.c
+++ b/drivers/mtd/maps/bast-flash.c
@@ -9,8 +9,6 @@
  *	20-Sep-2004  BJD  Initial version
  *	17-Jan-2005  BJD  Add whole device if no partitions found
  *
- * $Id: bast-flash.c,v 1.5 2005/11/07 11:14:26 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index 9f17bb6c5a9..cb507da0a87 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -1,7 +1,6 @@
 /*
  * Flash on Cirrus CDB89712
  *
- * $Id: cdb89712.c,v 1.11 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index 629e6e2641a..6464d487eb1 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -11,7 +11,6 @@
  *
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  *
- * $Id: ceiva.c,v 1.11 2004/09/16 23:27:12 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index 65e5ee55201..0ecc3f6d735 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -1,8 +1,6 @@
 /*
  *  Copyright © 2001 Flaga hf. Medical Devices, Kári Davíðsson <kd@flaga.is>
  *
- *  $Id: cfi_flagadm.c,v 1.15 2005/11/07 11:14:26 gleixner Exp $
- *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
index 92a9c7fac99..e115667bf1d 100644
--- a/drivers/mtd/maps/dbox2-flash.c
+++ b/drivers/mtd/maps/dbox2-flash.c
@@ -1,6 +1,4 @@
 /*
- * $Id: dbox2-flash.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
- *
  * D-Box 2 flash driver
  */
 
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index b32bb9347d7..3aa018c092f 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -4,8 +4,6 @@
  * (C) 2000  Nicolas Pitre <nico@cam.org>
  *
  * This code is GPL
- *
- * $Id: dc21285.c,v 1.24 2005/11/07 11:14:26 gleixner Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
index 1c3b34ad732..0713e3a5a22 100644
--- a/drivers/mtd/maps/dilnetpc.c
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -14,8 +14,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: dilnetpc.c,v 1.20 2005/11/07 11:14:26 gleixner Exp $
- *
  * The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems
  * featuring the AMD Elan SC410 processor. There are two variants of this
  * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
index e0558b0b2fe..d171674eb2e 100644
--- a/drivers/mtd/maps/dmv182.c
+++ b/drivers/mtd/maps/dmv182.c
@@ -4,8 +4,6 @@
  *
  * Flash map driver for the Dy4 SVME182 board
  *
- * $Id: dmv182.c,v 1.6 2005/11/07 11:14:26 gleixner Exp $
- *
  * Copyright 2003-2004, TimeSys Corporation
  *
  * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp.
diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c
index 1488bb92f26..d92b7c70d3e 100644
--- a/drivers/mtd/maps/ebony.c
+++ b/drivers/mtd/maps/ebony.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ebony.c,v 1.16 2005/11/07 11:14:26 gleixner Exp $
- *
  * Mapping for Ebony user flash
  *
  * Matt Porter <mporter@kernel.crashing.org>
diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c
index 1c5b97c8968..9433738c166 100644
--- a/drivers/mtd/maps/edb7312.c
+++ b/drivers/mtd/maps/edb7312.c
@@ -1,6 +1,4 @@
 /*
- * $Id: edb7312.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the NOR flash on Cogent EDB7312 boards
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
index 7c50c271651..a8e3fde4cbd 100644
--- a/drivers/mtd/maps/fortunet.c
+++ b/drivers/mtd/maps/fortunet.c
@@ -1,6 +1,5 @@
 /* fortunet.c memory map
  *
- * $Id: fortunet.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 6dde3182d64..ef891547446 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -2,8 +2,6 @@
  * Flash memory access on Hynix GMS30C7201/HMS30C7202 based
  * evaluation boards
  *
- * $Id: h720x-flash.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $
- *
  * (C) 2002 Jungjun Kim <jungjun.kim@hynix.com>
  *     2003 Thomas Gleixner <tglx@linutronix.de>
  */
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 2c884c49e84..aeb6c916e23 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -2,7 +2,6 @@
  * ichxrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: ichxrom.c,v 1.19 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index a0b4dc7155d..2682ab51a36 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -1,6 +1,4 @@
 /*
- * $Id: impa7.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the NOR flash on implementa A7 boards
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index 325c8880c43..ee361aaadb1 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -22,8 +22,6 @@
    This is access code for flashes using ARM's flash partitioning
    standards.
 
-   $Id: integrator-flash.c,v 1.20 2005/11/07 11:14:27 gleixner Exp $
-
 ======================================================================*/
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index f27c132794c..a806119797e 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -4,8 +4,6 @@
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  * (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com>
  * (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes
- *
- * $Id: ipaq-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index c8396b8574c..c2264792a20 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ixp2000.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
- *
  * drivers/mtd/maps/ixp2000.c
  *
  * Mapping for the Intel XScale IXP2000 based systems
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 01f19a4714b..9c7a5fbd4e5 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ixp4xx.c,v 1.13 2005/11/16 16:23:21 dvrabel Exp $
- *
  * drivers/mtd/maps/ixp4xx.c
  *
  * MTD Map file for IXP4XX based systems. Please do not make per-board
diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index 67620adf481..9e054503c4c 100644
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -1,6 +1,4 @@
 /*
- * $Id: l440gx.c,v 1.18 2005/11/07 11:14:27 gleixner Exp $
- *
  * BIOS Flash chip on Intel 440GX board.
  *
  * Bugs this currently does not work under linuxBIOS.
diff --git a/drivers/mtd/maps/map_funcs.c b/drivers/mtd/maps/map_funcs.c
index 9105e6ca0aa..3f268370eec 100644
--- a/drivers/mtd/maps/map_funcs.c
+++ b/drivers/mtd/maps/map_funcs.c
@@ -1,6 +1,4 @@
 /*
- * $Id: map_funcs.c,v 1.10 2005/06/06 23:04:36 tpoynor Exp $
- *
  * Out-of-line map I/O functions for simple maps when CONFIG_COMPLEX_MAPPINGS
  * is enabled.
  */
diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c
index 06b11872784..706f67394b0 100644
--- a/drivers/mtd/maps/mbx860.c
+++ b/drivers/mtd/maps/mbx860.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mbx860.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the flash on MBX860 boards
  *
  * Author:	Anton Todorov
diff --git a/drivers/mtd/maps/mtx-1_flash.c b/drivers/mtd/maps/mtx-1_flash.c
index 2a8fde9b92f..a3b65190412 100644
--- a/drivers/mtd/maps/mtx-1_flash.c
+++ b/drivers/mtd/maps/mtx-1_flash.c
@@ -1,8 +1,6 @@
 /*
  * Flash memory access on 4G Systems MTX-1 boards
  *
- * $Id: mtx-1_flash.c,v 1.2 2005/11/07 11:14:27 gleixner Exp $
- *
  * (C) 2005 Bruno Randolf <bruno.randolf@4g-systems.biz>
  * (C) 2005 Joern Engel <joern@wohnheim.fh-wedel.de>
  *
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index 95dcab2146a..c0cb319b2b7 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -3,8 +3,6 @@
  * Copyright (C) 2001 Mark Langsdorf (mark.langsdorf@amd.com)
  *	based on sc520cdp.c by Sysgo Real-Time Solutions GmbH
  *
- * $Id: netsc520.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 0c9b305a72e..965e6c6d6ab 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -5,8 +5,6 @@
  *
  *      (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
  *      (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
- *
- *	$Id: nettel.c,v 1.12 2005/11/29 14:30:00 gleixner Exp $
  */
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c
index a6642db3d32..43e04c1d22a 100644
--- a/drivers/mtd/maps/octagon-5066.c
+++ b/drivers/mtd/maps/octagon-5066.c
@@ -1,4 +1,3 @@
-// $Id: octagon-5066.c,v 1.28 2005/11/07 11:14:27 gleixner Exp $
 /* ######################################################################
 
    Octagon 5066 MTD Driver.
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
index e6e391efbeb..0a60ebbc217 100644
--- a/drivers/mtd/maps/omap-toto-flash.c
+++ b/drivers/mtd/maps/omap-toto-flash.c
@@ -4,8 +4,6 @@
  * jzhang@ti.com (C) 2003 Texas Instruments.
  *
  *  (C) 2002 MontVista Software, Inc.
- *
- * $Id: omap-toto-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index d2ab1bae9c3..5c6a25c9038 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -7,8 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  $Id: pci.c,v 1.14 2005/11/17 08:20:27 dwmw2 Exp $
- *
  * Generic PCI memory map driver.  We support the following boards:
  *  - Intel IQ80310 ATU.
  *  - Intel EBSA285 (blank rom programming mode). Tested working 27/09/2001
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 1912d968718..8f7ca863f89 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: pcmciamtd.c,v 1.55 2005/11/07 11:14:28 gleixner Exp $
- *
  * pcmciamtd.c - MTD driver for PCMCIA flash memory cards
  *
  * Author: Simon Evans <spse@secret.org.uk>
@@ -48,7 +46,6 @@ static const int debug = 0;
 
 
 #define DRIVER_DESC	"PCMCIA Flash memory card driver"
-#define DRIVER_VERSION	"$Revision: 1.55 $"
 
 /* Size of the PCMCIA address space: 26 bits = 64 MB */
 #define MAX_PCMCIA_ADDR	0x4000000
@@ -790,7 +787,7 @@ static struct pcmcia_driver pcmciamtd_driver = {
 
 static int __init init_pcmciamtd(void)
 {
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	info(DRIVER_DESC);
 
 	if(bankwidth && bankwidth != 1 && bankwidth != 2) {
 		info("bad bankwidth (%d), using default", bankwidth);
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 183255fcfdc..1f6b9066b63 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -1,6 +1,4 @@
 /*
- * $Id: physmap.c,v 1.39 2005/11/29 14:49:36 gleixner Exp $
- *
  * Normal mappings of chips in physical memory
  *
  * Copyright (C) 2003 MontaVista Software Inc.
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 3eb2643b232..e7dd9c8a965 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -6,8 +6,6 @@
  *
  * Generic platfrom device based RAM map
  *
- * $Id: plat-ram.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index 4d858b3d5f8..de002eb1a7f 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -1,6 +1,4 @@
 /*
- * $Id: redwood.c,v 1.11 2005/11/07 11:14:28 gleixner Exp $
- *
  * drivers/mtd/maps/redwood.c
  *
  * FLASH map for the IBM Redwood 4/5/6 boards.
diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c
index 809a0c8e7aa..14d90edb443 100644
--- a/drivers/mtd/maps/rpxlite.c
+++ b/drivers/mtd/maps/rpxlite.c
@@ -1,6 +1,4 @@
 /*
- * $Id: rpxlite.c,v 1.22 2004/11/04 13:24:15 gleixner Exp $
- *
  * Handle mapping of the flash on the RPX Lite and CLLF boards
  */
 
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index c7d5a52a2d5..e177a43dfff 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -2,8 +2,6 @@
  * Flash memory access on SA11x0 based devices
  *
  * (C) 2000 Nicolas Pitre <nico@cam.org>
- *
- * $Id: sa1100-flash.c,v 1.51 2005/11/07 11:14:28 gleixner Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
index b8c1331b7a0..6e1e99cd2b5 100644
--- a/drivers/mtd/maps/sbc8240.c
+++ b/drivers/mtd/maps/sbc8240.c
@@ -4,9 +4,6 @@
  * Carolyn Smith, Tektronix, Inc.
  *
  * This code is GPLed
- *
- * $Id: sbc8240.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
- *
  */
 
 /*
diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
index 7cc4041d096..1b1c0b7e11e 100644
--- a/drivers/mtd/maps/sbc_gxx.c
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -17,8 +17,6 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 
-   $Id: sbc_gxx.c,v 1.35 2005/11/07 11:14:28 gleixner Exp $
-
 The SBC-MediaGX / SBC-GXx has up to 16 MiB of
 Intel StrataFlash (28F320/28F640) in x8 mode.
 
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 4045e372b90..85c1e56309e 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -16,8 +16,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: sc520cdp.c,v 1.23 2005/11/17 08:20:27 dwmw2 Exp $
- *
  *
  * The SC520CDP is an evaluation board for the Elan SC520 processor available
  * from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 0fc5584324e..21169e6d646 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -1,6 +1,5 @@
 /*
  * MTD map driver for BIOS Flash on Intel SCB2 boards
- * $Id: scb2_flash.c,v 1.12 2005/03/18 14:04:35 gleixner Exp $
  * Copyright (C) 2002 Sun Microsystems, Inc.
  * Tim Hockin <thockin@sun.com>
  *
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
index 5e2bce22f37..b5391ebb736 100644
--- a/drivers/mtd/maps/scx200_docflash.c
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -2,8 +2,6 @@
 
    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
 
-   $Id: scx200_docflash.c,v 1.12 2005/11/07 11:14:28 gleixner Exp $
-
    National Semiconductor SCx200 flash mapped with DOCCS
 */
 
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
index 917dc778f24..026eab02818 100644
--- a/drivers/mtd/maps/sharpsl-flash.c
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -4,8 +4,6 @@
  * Copyright (C) 2001 Lineo Japan, Inc.
  * Copyright (C) 2002  SHARP
  *
- * $Id: sharpsl-flash.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
- *
  * based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp
  *          Handle mapping of the flash on the RPX Lite and CLLF boards
  *
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index d76ceef453c..0eb41d9c678 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -1,6 +1,4 @@
 /*
- * $Id: solutionengine.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
- *
  * Flash and EPROM on Hitachi Solution Engine and similar boards.
  *
  * (C) 2001 Red Hat, Inc.
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 001af7f7ddd..0d7c88396c8 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -1,4 +1,4 @@
-/* $Id: sun_uflash.c,v 1.13 2005/11/07 11:14:28 gleixner Exp $
+/*
  *
  * sun_uflash - Driver implementation for user-programmable flash
  * present on many Sun Microsystems SME boardsets.
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
index 52173405731..a5d3d8531fa 100644
--- a/drivers/mtd/maps/tqm8xxl.c
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -2,8 +2,6 @@
  * Handle mapping of the flash memory access routines
  * on TQM8xxL based devices.
  *
- * $Id: tqm8xxl.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
- *
  * based on rpxlite.c
  *
  * Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index b47270e850b..e2147bf11c8 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -22,8 +22,6 @@
  * - Drive A and B use the resident flash disk (RFD) flash translation layer.
  * - If you have created your own jffs file system and the bios overwrites
  *   it during boot, try disabling Drive A: and B: in the boot order.
- *
- * $Id: ts5500_flash.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c
index 0f915ac3102..77a8bfc0257 100644
--- a/drivers/mtd/maps/tsunami_flash.c
+++ b/drivers/mtd/maps/tsunami_flash.c
@@ -2,7 +2,6 @@
  * tsunami_flash.c
  *
  * flash chip on alpha ds10...
- * $Id: tsunami_flash.c,v 1.10 2005/11/07 11:14:29 gleixner Exp $
  */
 #include <asm/io.h>
 #include <asm/core_tsunami.h>
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index c42f4b83f68..bac000a8831 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -4,8 +4,6 @@
  *	uclinux.c -- generic memory mapped MTD driver for uclinux
  *
  *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- * 	$Id: uclinux.c,v 1.12 2005/11/07 11:14:29 gleixner Exp $
  */
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
index b3e48739543..5a0c9a353b0 100644
--- a/drivers/mtd/maps/vmax301.c
+++ b/drivers/mtd/maps/vmax301.c
@@ -1,4 +1,3 @@
-// $Id: vmax301.c,v 1.32 2005/11/07 11:14:29 gleixner Exp $
 /* ######################################################################
 
    Tempustech VMAX SBC301 MTD Driver.
diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c
index ca932122fb6..e243476c817 100644
--- a/drivers/mtd/maps/walnut.c
+++ b/drivers/mtd/maps/walnut.c
@@ -1,6 +1,4 @@
 /*
- * $Id: walnut.c,v 1.3 2005/11/07 11:14:29 gleixner Exp $
- *
  * Mapping for Walnut flash
  * (used ebony.c as a "framework")
  *
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
index ac5b8105b6e..413b0cf9bbd 100644
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -1,6 +1,4 @@
 /*
- * $Id: wr_sbc82xx_flash.c,v 1.8 2005/11/07 11:14:29 gleixner Exp $
- *
  * Map for flash chips on Wind River PowerQUICC II SBC82xx board.
  *
  * Copyright (C) 2004 Red Hat, Inc.
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 839eed8430a..a0ada45672d 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd_blkdevs.c,v 1.27 2005/11/07 11:14:20 gleixner Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Interface to Linux 2.5 block layer for MTD 'translation layers'.
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 952da30b174..208c6faa035 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -1,8 +1,6 @@
 /*
  * Direct MTD block device access
  *
- * $Id: mtdblock.c,v 1.68 2005/11/07 11:14:20 gleixner Exp $
- *
  * (C) 2000-2003 Nicolas Pitre <nico@cam.org>
  * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
  */
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index f79dbb49b1a..852165f8b1c 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdblock_ro.c,v 1.19 2004/11/16 18:28:59 dwmw2 Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Simple read-only (writable only for RAM) mtdblock driver
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 5d3ac512ce1..4b3156f9b36 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdchar.c,v 1.76 2005/11/07 11:14:20 gleixner Exp $
- *
  * Character-device access to raw MTD devices.
  *
  */
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index d563dcd4b26..2972a5edb73 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -6,8 +6,6 @@
  * NAND support by Christian Gan <cgan@iders.ca>
  *
  * This code is GPL
- *
- * $Id: mtdconcat.c,v 1.11 2005/11/07 11:14:20 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 8c61035b968..4373790401d 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdcore.c,v 1.47 2005/11/07 11:14:20 gleixner Exp $
- *
  * Core registration and callback routines for MTD
  * drivers and users.
  *
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 07c70116934..11b803cc405 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -5,8 +5,6 @@
  *
  * This code is GPL
  *
- * $Id: mtdpart.c,v 1.55 2005/11/07 11:14:20 gleixner Exp $
- *
  * 	02-21-2002	Thomas Gleixner <gleixner@autronix.de>
  *			added support for read_oob, write_oob
  */
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5076faf9ca6..7dea6c3a660 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/nand/Kconfig
-# $Id: Kconfig,v 1.35 2005/11/07 11:14:30 gleixner Exp $
 
 menuconfig MTD_NAND
 	tristate "NAND Device Support"
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index a6e74a46992..d95a10c5186 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/nand/Makefile
 #
-# $Id: Makefile.common,v 1.15 2004/11/26 12:28:22 dedekind Exp $
 
 obj-$(CONFIG_MTD_NAND)			+= nand.o nand_ecc.o
 obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 09e421a9689..22ad9f36776 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2004 Embedded Edge, LLC
  *
- * $Id: au1550nd.c,v 1.13 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index dd38011ee0b..553dd7e9b41 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/spia.c
  *	 Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: autcpu12.c,v 1.23 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 0e72153b329..cd4393ce256 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -15,8 +15,6 @@
  * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
  *
  * Interface to generic NAND code for M-Systems DiskOnChip devices
- *
- * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index ba67bbec20d..387e4352903 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/autcpu12.c
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: edb7312.c,v 1.12 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 2d585d2d090..9e59de501c2 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -7,8 +7,6 @@
  *       Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: h1910.c,v 1.6 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 5e121ceaa59..0b1c48595f1 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -6,8 +6,6 @@
  *
  *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 9003a135e05..918a806a847 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -9,8 +9,6 @@
  *
  * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $
- *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 or (at your option) any
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a3e3ab0185d..69ee2c90eb0 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 68c150c8ff9..add975a229a 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -21,8 +21,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
- *
- * $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 082073acf20..cc865843185 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/edb7312.c
  *
  *
- * $Id: ppchameleonevb.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 26f88215bc4..a033c4cd8e1 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/spia.c
  *       Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: rtc_from4.c,v 1.10 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index b34a460ab67..91f42e48552 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -20,8 +20,6 @@
  *	20-Oct-2005  BJD  Fix timing calculation bug
  *	14-Jan-2006  BJD  Allow clock to be stopped when idle
  *
- * $Id: s3c2410.c,v 1.23 2006/04/01 18:06:29 bjd Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 033f8800b1e..6dba2fb66ae 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2004 Richard Purdie
  *
- *  $Id: sharpsl.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
  *  Based on Sharp's NAND driver sharp_sl.c
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
index 1f6d429b158..0cc6d0acb8f 100644
--- a/drivers/mtd/nand/spia.c
+++ b/drivers/mtd/nand/spia.c
@@ -8,8 +8,6 @@
  *			to controllines	(due to change in nand.c)
  *			page_cache added
  *
- * $Id: spia.c,v 1.25 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
index f9e2d4a0ab8..bbf492e6830 100644
--- a/drivers/mtd/nand/toto.c
+++ b/drivers/mtd/nand/toto.c
@@ -14,8 +14,6 @@
  *  Overview:
  *   This is a device driver for the NAND flash device found on the
  *   TI fido board. It supports 32MiB and 64MiB cards
- *
- * $Id: toto.c,v 1.5 2005/11/07 11:14:31 gleixner Exp $
  */
 
 #include <linux/slab.h>
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index f40081069ab..807a72752ee 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -9,8 +9,6 @@
  * Derived from drivers/mtd/nand/autcpu12.c
  *   Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: ts7250.c,v 1.4 2004/12/30 22:02:07 joff Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index 0c9ce19ea27..320b929abe7 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -1,7 +1,6 @@
 /* Linux driver for NAND Flash Translation Layer      */
 /* (c) 1999 Machine Vision Holdings, Inc.             */
 /* Author: David Woodhouse <dwmw2@infradead.org>      */
-/* $Id: nftlcore.c,v 1.98 2005/11/07 11:14:21 gleixner Exp $ */
 
 /*
   The contents of this file are distributed under the GNU General
@@ -803,12 +802,8 @@ static struct mtd_blktrans_ops nftl_tr = {
 	.owner		= THIS_MODULE,
 };
 
-extern char nftlmountrev[];
-
 static int __init init_nftl(void)
 {
-	printk(KERN_INFO "NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c %s\n", nftlmountrev);
-
 	return register_mtd_blktrans(&nftl_tr);
 }
 
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 345e6eff89c..ccc4f209fbb 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -4,8 +4,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: nftlmount.c,v 1.41 2005/11/07 11:14:21 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -31,8 +29,6 @@
 
 #define SECTORSIZE 512
 
-char nftlmountrev[]="$Revision: 1.41 $";
-
 /* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
  *	various device information of the NFTL partition and Bad Unit Table. Update
  *	the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 47474903263..5afa268c02f 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,6 +1,4 @@
 /*
- * $Id: redboot.c,v 1.21 2006/03/30 18:34:37 bjd Exp $
- *
  * Parse RedBoot-style Flash Image System (FIS) tables and
  * produce a Linux partition array to match.
  */
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index c84e4546549..e538c0a72ab 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -3,8 +3,6 @@
  *
  * Copyright (C) 2005  Sean Young <sean@mess.org>
  *
- * $Id: rfd_ftl.c,v 1.8 2006/01/15 12:51:44 sean Exp $
- *
  * This type of flash translation layer (FTL) is used by the Embedded BIOS
  * by General Software. It is known as the Resident Flash Disk (RFD), see:
  *
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
index 6b563cae23d..da720bc3eb1 100644
--- a/include/linux/jffs2.h
+++ b/include/linux/jffs2.h
@@ -7,9 +7,6 @@
  *
  * For licensing information, see the file 'LICENCE' in the
  * jffs2 directory.
- *
- * $Id: jffs2.h,v 1.38 2005/09/26 11:37:23 havasi Exp $
- *
  */
 
 #ifndef __LINUX_JFFS2_H__
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index 9a6e2f953cb..310e6160641 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -1,6 +1,4 @@
 /*
- * $Id: blktrans.h,v 1.6 2005/11/07 11:14:54 gleixner Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Interface to Linux block layer for MTD 'translation layers'.
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index b0ddf4b2586..d6fb115f5a0 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -1,7 +1,6 @@
 
 /* Common Flash Interface structures
  * See http://support.intel.com/design/flash/technote/index.htm
- * $Id: cfi.h,v 1.57 2005/11/15 23:28:17 tpoynor Exp $
  */
 
 #ifndef __MTD_CFI_H__
diff --git a/include/linux/mtd/cfi_endian.h b/include/linux/mtd/cfi_endian.h
index 25724f7d386..d802f7736be 100644
--- a/include/linux/mtd/cfi_endian.h
+++ b/include/linux/mtd/cfi_endian.h
@@ -1,8 +1,3 @@
-/*
- * $Id: cfi_endian.h,v 1.11 2002/01/30 23:20:48 awozniak Exp $
- *
- */
-
 #include <asm/byteorder.h>
 
 #ifndef CONFIG_MTD_CFI_ADV_OPTIONS
diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h
index ed8dc675521..c02f3d264ec 100644
--- a/include/linux/mtd/concat.h
+++ b/include/linux/mtd/concat.h
@@ -4,8 +4,6 @@
  * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
  *
  * This code is GPL
- *
- * $Id: concat.h,v 1.1 2002/03/08 16:34:36 rkaiser Exp $
  */
 
 #ifndef MTD_CONCAT_H
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 9addd073bf1..0a6d516ab71 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -6,8 +6,6 @@
  * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com>
  * Copyright (C) 2002-2003 SnapGear Inc
  *
- * $Id: doc2000.h,v 1.25 2005/11/07 11:14:54 gleixner Exp $
- *
  * Released under GPL
  */
 
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index 39e7d2a1be9..08dd131301c 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -5,9 +5,6 @@
  * Contains information about the location and state of a given flash device
  *
  * (C) 2000 Red Hat. GPLd.
- *
- * $Id: flashchip.h,v 1.18 2005/11/07 11:14:54 gleixner Exp $
- *
  */
 
 #ifndef __MTD_FLASHCHIP_H__
diff --git a/include/linux/mtd/ftl.h b/include/linux/mtd/ftl.h
index d9960911330..0be442f881d 100644
--- a/include/linux/mtd/ftl.h
+++ b/include/linux/mtd/ftl.h
@@ -1,6 +1,4 @@
 /*
- * $Id: ftl.h,v 1.7 2005/11/07 11:14:54 gleixner Exp $
- *
  * Derived from (and probably identical to):
  * ftl.h 1.7 1999/10/25 20:23:17
  *
diff --git a/include/linux/mtd/gen_probe.h b/include/linux/mtd/gen_probe.h
index 256e7342ed1..df362ddf294 100644
--- a/include/linux/mtd/gen_probe.h
+++ b/include/linux/mtd/gen_probe.h
@@ -1,7 +1,6 @@
 /*
  * (C) 2001, 2001 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.h,v 1.4 2005/11/07 11:14:54 gleixner Exp $
  */
 
 #ifndef __LINUX_MTD_GEN_PROBE_H__
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index 85fd041d44a..64ee53ce95a 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -2,8 +2,6 @@
  *	inftl.h -- defines to support the Inverse NAND Flash Translation Layer
  *
  *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- *	$Id: inftl.h,v 1.7 2005/06/13 13:08:45 sean Exp $
  */
 
 #ifndef __MTD_INFTL_H__
@@ -52,8 +50,6 @@ struct INFTLrecord {
 int INFTL_mount(struct INFTLrecord *s);
 int INFTL_formatblock(struct INFTLrecord *s, int block);
 
-extern char inftlmountrev[];
-
 void INFTL_dumptables(struct INFTLrecord *s);
 void INFTL_dumpVUchains(struct INFTLrecord *s);
 
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index a9fae032ba8..85e3939cf48 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -1,6 +1,5 @@
 
 /* Overhauled routines for dealing with different mmap regions of flash */
-/* $Id: map.h,v 1.54 2005/11/07 11:14:54 gleixner Exp $ */
 
 #ifndef __LINUX_MTD_MAP_H__
 #define __LINUX_MTD_MAP_H__
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 245f9098e17..31ed234b2a7 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $
- *
  * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
  *
  * Released under GPL
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index c42bc7f533a..1288be7b774 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -5,8 +5,6 @@
  *                     Steven J. Hill <sjhill@realitydiluted.com>
  *		       Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand.h,v 1.74 2005/09/15 13:58:50 vwool Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 12c5bc342ea..090da505425 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index 001eec50cac..dcaf611ed74 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -1,6 +1,4 @@
 /*
- * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $
- *
  * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
  */
 
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 7c37d7e55ab..5014f7a9f5d 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -4,8 +4,6 @@
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  *
  * This code is GPL
- *
- * $Id: partitions.h,v 1.17 2005/11/07 11:14:55 gleixner Exp $
  */
 
 #ifndef MTD_PARTITIONS_H
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index 0dc07d5f335..c8e63a5ee72 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -2,8 +2,6 @@
  * For boards with physically mapped flash and using
  * drivers/mtd/maps/physmap.c mapping driver.
  *
- * $Id: physmap.h,v 1.4 2005/11/07 11:14:55 gleixner Exp $
- *
  * Copyright (C) 2003 MontaVista Software Inc.
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h
index 0e37ad07bce..e07890aff1c 100644
--- a/include/linux/mtd/plat-ram.h
+++ b/include/linux/mtd/plat-ram.h
@@ -6,8 +6,6 @@
  *
  * Generic platform device based RAM map
  *
- * $Id: plat-ram.h,v 1.2 2005/01/24 00:37:40 bjd Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h
index 5cc070c24d8..27ad40aed19 100644
--- a/include/linux/mtd/pmc551.h
+++ b/include/linux/mtd/pmc551.h
@@ -1,6 +1,4 @@
 /*
- * $Id: pmc551.h,v 1.6 2005/11/07 11:14:55 gleixner Exp $
- *
  * PMC551 PCI Mezzanine Ram Device
  *
  * Author:
@@ -17,7 +15,7 @@
 
 #include <linux/mtd/mtd.h>
 
-#define PMC551_VERSION "$Id: pmc551.h,v 1.6 2005/11/07 11:14:55 gleixner Exp $\n"\
+#define PMC551_VERSION \
        "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n"
 
 /*
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
index e9d40bdde48..36efcba15ec 100644
--- a/include/linux/mtd/xip.h
+++ b/include/linux/mtd/xip.h
@@ -11,8 +11,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.5 2005/11/07 11:14:55 gleixner Exp $
  */
 
 #ifndef __LINUX_MTD_XIP_H__
diff --git a/include/mtd/inftl-user.h b/include/mtd/inftl-user.h
index 9b1e2526b45..e17eda302b2 100644
--- a/include/mtd/inftl-user.h
+++ b/include/mtd/inftl-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: inftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
- *
  * Parts of INFTL headers shared with userspace
  *
  */
diff --git a/include/mtd/jffs2-user.h b/include/mtd/jffs2-user.h
index d508ef0ae09..001685d7fa8 100644
--- a/include/mtd/jffs2-user.h
+++ b/include/mtd/jffs2-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: jffs2-user.h,v 1.1 2004/05/05 11:57:54 dwmw2 Exp $
- *
  * JFFS2 definitions for use in user space only
  */
 
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index 615072c4da0..c6c61cd5a25 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $
- *
  * Portions of MTD ABI definition which are shared by kernel and user space
  */
 
diff --git a/include/mtd/mtd-user.h b/include/mtd/mtd-user.h
index 713f34d3e62..170ceca3b2d 100644
--- a/include/mtd/mtd-user.h
+++ b/include/mtd/mtd-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd-user.h,v 1.2 2004/05/05 14:44:57 dwmw2 Exp $
- *
  * MTD ABI header for use by user space only.
  */
 
diff --git a/include/mtd/nftl-user.h b/include/mtd/nftl-user.h
index b2bca18e731..390d21c080a 100644
--- a/include/mtd/nftl-user.h
+++ b/include/mtd/nftl-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: nftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
- *
  * Parts of NFTL headers shared with userspace
  *
  */
-- 
cgit v1.2.3


From 71a928c0e52cedc43747c64b96a5f74592ab678f Mon Sep 17 00:00:00 2001
From: Chris Malley <mail@chrismalley.co.uk>
Date: Mon, 19 May 2008 20:11:50 +0100
Subject: [MTD] Use list_for_each_entry[_safe] where appropriate.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Janitorial work to remove temporary pointers and make some functions a bit
more readable.

Signed-off-by: Chris Malley <mail@chrismalley.co.uk>
Reviewed-By: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/mtd_blkdevs.c | 32 ++++++++++----------------------
 drivers/mtd/mtdcore.c     |  6 ++----
 drivers/mtd/mtdpart.c     | 23 +++++++----------------
 3 files changed, 19 insertions(+), 42 deletions(-)

diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index a0ada45672d..9ff007c4962 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -210,7 +210,7 @@ static struct block_device_operations mtd_blktrans_ops = {
 int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 {
 	struct mtd_blktrans_ops *tr = new->tr;
-	struct list_head *this;
+	struct mtd_blktrans_dev *d;
 	int last_devnum = -1;
 	struct gendisk *gd;
 
@@ -219,8 +219,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 		BUG();
 	}
 
-	list_for_each(this, &tr->devs) {
-		struct mtd_blktrans_dev *d = list_entry(this, struct mtd_blktrans_dev, list);
+	list_for_each_entry(d, &tr->devs, list) {
 		if (new->devnum == -1) {
 			/* Use first free number */
 			if (d->devnum != last_devnum+1) {
@@ -307,33 +306,24 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 
 static void blktrans_notify_remove(struct mtd_info *mtd)
 {
-	struct list_head *this, *this2, *next;
-
-	list_for_each(this, &blktrans_majors) {
-		struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
-
-		list_for_each_safe(this2, next, &tr->devs) {
-			struct mtd_blktrans_dev *dev = list_entry(this2, struct mtd_blktrans_dev, list);
+	struct mtd_blktrans_ops *tr;
+	struct mtd_blktrans_dev *dev, *next;
 
+	list_for_each_entry(tr, &blktrans_majors, list)
+		list_for_each_entry_safe(dev, next, &tr->devs, list)
 			if (dev->mtd == mtd)
 				tr->remove_dev(dev);
-		}
-	}
 }
 
 static void blktrans_notify_add(struct mtd_info *mtd)
 {
-	struct list_head *this;
+	struct mtd_blktrans_ops *tr;
 
 	if (mtd->type == MTD_ABSENT)
 		return;
 
-	list_for_each(this, &blktrans_majors) {
-		struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
-
+	list_for_each_entry(tr, &blktrans_majors, list)
 		tr->add_mtd(tr, mtd);
-	}
-
 }
 
 static struct mtd_notifier blktrans_notifier = {
@@ -404,7 +394,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 
 int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
 {
-	struct list_head *this, *next;
+	struct mtd_blktrans_dev *dev, *next;
 
 	mutex_lock(&mtd_table_mutex);
 
@@ -414,10 +404,8 @@ int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	/* Remove it from the list of active majors */
 	list_del(&tr->list);
 
-	list_for_each_safe(this, next, &tr->devs) {
-		struct mtd_blktrans_dev *dev = list_entry(this, struct mtd_blktrans_dev, list);
+	list_for_each_entry_safe(dev, next, &tr->devs, list)
 		tr->remove_dev(dev);
-	}
 
 	blk_cleanup_queue(tr->blkcore_priv->rq);
 	unregister_blkdev(tr->major, tr->name);
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 4373790401d..a9d24694982 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -70,9 +70,8 @@ int add_mtd_device(struct mtd_info *mtd)
 			DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
 			/* No need to get a refcount on the module containing
 			   the notifier, since we hold the mtd_table_mutex */
-			list_for_each_entry(not, &mtd_notifiers, list) {
+			list_for_each_entry(not, &mtd_notifiers, list)
 				not->add(mtd);
-			}
 
 			mutex_unlock(&mtd_table_mutex);
 			/* We _know_ we aren't being removed, because
@@ -114,9 +113,8 @@ int del_mtd_device (struct mtd_info *mtd)
 
 		/* No need to get a refcount on the module containing
 		   the notifier, since we hold the mtd_table_mutex */
-		list_for_each_entry(not, &mtd_notifiers, list) {
+		list_for_each_entry(not, &mtd_notifiers, list)
 			not->remove(mtd);
-		}
 
 		mtd_table[mtd->index] = NULL;
 
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 11b803cc405..56a760a736a 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -300,22 +300,15 @@ static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
 
 int del_mtd_partitions(struct mtd_info *master)
 {
-	struct list_head *node;
-	struct mtd_part *slave;
+	struct mtd_part *slave, *next;
 
-	for (node = mtd_partitions.next;
-	     node != &mtd_partitions;
-	     node = node->next) {
-		slave = list_entry(node, struct mtd_part, list);
+	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
 		if (slave->master == master) {
-			struct list_head *prev = node->prev;
-			__list_del(prev, node->next);
+			list_del(&slave->list);
 			if(slave->registered)
 				del_mtd_device(&slave->mtd);
 			kfree(slave);
-			node = prev;
 		}
-	}
 
 	return 0;
 }
@@ -511,18 +504,16 @@ static LIST_HEAD(part_parsers);
 
 static struct mtd_part_parser *get_partition_parser(const char *name)
 {
-	struct list_head *this;
-	void *ret = NULL;
-	spin_lock(&part_parser_lock);
+	struct mtd_part_parser *p, *ret = NULL;
 
-	list_for_each(this, &part_parsers) {
-		struct mtd_part_parser *p = list_entry(this, struct mtd_part_parser, list);
+	spin_lock(&part_parser_lock);
 
+	list_for_each_entry(p, &part_parsers, list)
 		if (!strcmp(p->name, name) && try_module_get(p->owner)) {
 			ret = p;
 			break;
 		}
-	}
+
 	spin_unlock(&part_parser_lock);
 
 	return ret;
-- 
cgit v1.2.3


From 2e3c22f57029ce04d55c07b8332ae405005456d9 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Mon, 19 May 2008 18:32:24 +0800
Subject: [MTD] [MAPS] Blackfin Async Flash Maps
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Handle the case where flash memory and ethernet mac/phy are mapped onto
the same async bank

[try #4]
 - drop superfluous casts
 - drop SSYNC() when reading from the flash and rewrite
   bfin_copy_from() to be like bfin_copy_to() so that
   we dont have to handle all the aligned/unaligned cases

[try #3] rename bf5xx-flash to bfin-async-flash
 - move all kconfig board settings into board resources
 - fixup casting style according to lkml feedback
 - rewrite driver so that it can handle arbitrary of
   instances according to the declared platform resources

[try #2]
Remove useless SSYNC() as Will said

[try #1]
The BF533-STAMP does this for example.
All board-specific configuration goes in your board resources file.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Acked-By: Jörn Engel <joern@logfs.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/maps/Kconfig            |  11 ++
 drivers/mtd/maps/Makefile           |   1 +
 drivers/mtd/maps/bfin-async-flash.c | 219 ++++++++++++++++++++++++++++++++++++
 3 files changed, 231 insertions(+)
 create mode 100644 drivers/mtd/maps/bfin-async-flash.c

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index b2c18024561..02c45e1e24e 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -523,6 +523,17 @@ config MTD_PCMCIA_ANONYMOUS
 
 	  If unsure, say N.
 
+config MTD_BFIN_ASYNC
+	tristate "Blackfin BF533-STAMP Flash Chip Support"
+	depends on BFIN533_STAMP && MTD_CFI
+	select MTD_PARTITIONS
+	default y
+	help
+	  Map driver which allows for simultaneous utilization of
+	  ethernet and CFI parallel flash.
+
+	  If compiled as a module, it will be called bfin-async-flash.
+
 config MTD_UCLINUX
 	tristate "Generic uClinux RAM/ROM filesystem support"
 	depends on MTD_PARTITIONS && !MMU
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 5444eaf4026..d6cfce49058 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
 obj-$(CONFIG_MTD_MTX1)		+= mtx-1_flash.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o
+obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
new file mode 100644
index 00000000000..6fec86aaed7
--- /dev/null
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -0,0 +1,219 @@
+/*
+ * drivers/mtd/maps/bfin-async-flash.c
+ *
+ * Handle the case where flash memory and ethernet mac/phy are
+ * mapped onto the same async bank.  The BF533-STAMP does this
+ * for example.  All board-specific configuration goes in your
+ * board resources file.
+ *
+ * Copyright 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/blackfin.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "bfin-async-flash"
+
+struct async_state {
+	struct mtd_info *mtd;
+	struct map_info map;
+	int enet_flash_pin;
+	uint32_t flash_ambctl0, flash_ambctl1;
+	uint32_t save_ambctl0, save_ambctl1;
+	unsigned long irq_flags;
+};
+
+static void switch_to_flash(struct async_state *state)
+{
+	local_irq_save(state->irq_flags);
+
+	gpio_set_value(state->enet_flash_pin, 0);
+
+	state->save_ambctl0 = bfin_read_EBIU_AMBCTL0();
+	state->save_ambctl1 = bfin_read_EBIU_AMBCTL1();
+	bfin_write_EBIU_AMBCTL0(state->flash_ambctl0);
+	bfin_write_EBIU_AMBCTL1(state->flash_ambctl1);
+	SSYNC();
+}
+
+static void switch_back(struct async_state *state)
+{
+	bfin_write_EBIU_AMBCTL0(state->save_ambctl0);
+	bfin_write_EBIU_AMBCTL1(state->save_ambctl1);
+	SSYNC();
+
+	gpio_set_value(state->enet_flash_pin, 1);
+
+	local_irq_restore(state->irq_flags);
+}
+
+static map_word bfin_read(struct map_info *map, unsigned long ofs)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+	uint16_t word;
+	map_word test;
+
+	switch_to_flash(state);
+
+	word = readw(map->virt + ofs);
+
+	switch_back(state);
+
+	test.x[0] = word;
+	return test;
+}
+
+static void bfin_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+
+	switch_to_flash(state);
+
+	memcpy(to, map->virt + from, len);
+
+	switch_back(state);
+}
+
+static void bfin_write(struct map_info *map, map_word d1, unsigned long ofs)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+	uint16_t d;
+
+	d = d1.x[0];
+
+	switch_to_flash(state);
+
+	writew(d, map->virt + ofs);
+	SSYNC();
+
+	switch_back(state);
+}
+
+static void bfin_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+
+	switch_to_flash(state);
+
+	memcpy(map->virt + to, from, len);
+	SSYNC();
+
+	switch_back(state);
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+static int __devinit bfin_flash_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct physmap_flash_data *pdata = pdev->dev.platform_data;
+	struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	struct async_state *state;
+
+	state = kzalloc(sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	state->map.name       = DRIVER_NAME;
+	state->map.read       = bfin_read;
+	state->map.copy_from  = bfin_copy_from;
+	state->map.write      = bfin_write;
+	state->map.copy_to    = bfin_copy_to;
+	state->map.bankwidth  = pdata->width;
+	state->map.size       = memory->end - memory->start + 1;
+	state->map.virt       = (void __iomem *)memory->start;
+	state->map.phys       = memory->start;
+	state->map.map_priv_1 = (unsigned long)state;
+	state->enet_flash_pin = platform_get_irq(pdev, 0);
+	state->flash_ambctl0  = flash_ambctl->start;
+	state->flash_ambctl1  = flash_ambctl->end;
+
+	if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
+		pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+		return -EBUSY;
+	}
+	gpio_direction_output(state->enet_flash_pin, 1);
+
+	pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
+	state->mtd = do_map_probe(memory->name, &state->map);
+	if (!state->mtd)
+		return -ENXIO;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+	if (ret > 0) {
+		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
+		add_mtd_partitions(state->mtd, pdata->parts, ret);
+
+	} else if (pdata->nr_parts) {
+		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
+		add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
+
+	} else
+#endif
+	{
+		pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
+		add_mtd_device(state->mtd);
+	}
+
+	platform_set_drvdata(pdev, state);
+
+	return 0;
+}
+
+static int __devexit bfin_flash_remove(struct platform_device *pdev)
+{
+	struct async_state *state = platform_get_drvdata(pdev);
+	gpio_free(state->enet_flash_pin);
+#ifdef CONFIG_MTD_PARTITIONS
+	del_mtd_partitions(state->mtd);
+#endif
+	map_destroy(state->mtd);
+	kfree(state);
+	return 0;
+}
+
+static struct platform_driver bfin_flash_driver = {
+	.probe		= bfin_flash_probe,
+	.remove		= __devexit_p(bfin_flash_remove),
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+static int __init bfin_flash_init(void)
+{
+	return platform_driver_register(&bfin_flash_driver);
+}
+module_init(bfin_flash_init);
+
+static void __exit bfin_flash_exit(void)
+{
+	platform_driver_unregister(&bfin_flash_driver);
+}
+module_exit(bfin_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank");
-- 
cgit v1.2.3


From 451d33993b13174d27474ad2ce7a2f10ce2e31ad Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 20 May 2008 17:32:14 +0100
Subject: [MTD] [NAND] S3C2410: Change printk() into dev_dbg()

Fix a minor problem with what should have been
debug output by changing printk() to dev_dbg()
inside s3c2410_nand_update_chip().

Thanks to David Woodhouse for pointing this out.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/s3c2410.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 91f42e48552..c9726bd2c64 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -689,7 +689,8 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 {
 	struct nand_chip *chip = &nmtd->chip;
 
-	printk("%s: chip %p: %d\n", __func__, chip, chip->page_shift);
+	dev_dbg(info->device, "chip %p => page shift %d\n",
+		chip, chip->page_shift);
 
 	if (hardware_ecc) {
 		/* change the behaviour depending on wether we are using
-- 
cgit v1.2.3


From 7e74a5076edb3555dc6c96dc91b155706515bb4c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 20 May 2008 17:32:27 +0100
Subject: [MTD] [NAND] S3C2410: Remove changelog and tidy header

The changelog on the driver is superflous given this
is being kept under revision control. Remove the other
cruft in the header and update the copyright and the
supported device list.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/s3c2410.c | 20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index c9726bd2c64..35c6db54c98 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -1,24 +1,10 @@
 /* linux/drivers/mtd/nand/s3c2410.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright © 2004-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C2410/S3C240 NAND driver
- *
- * Changelog:
- *	21-Sep-2004  BJD  Initial version
- *	23-Sep-2004  BJD  Multiple device support
- *	28-Sep-2004  BJD  Fixed ECC placement for Hardware mode
- *	12-Oct-2004  BJD  Fixed errors in use of platform data
- *	18-Feb-2005  BJD  Fix sparse errors
- *	14-Mar-2005  BJD  Applied tglx's code reduction patch
- *	02-May-2005  BJD  Fixed s3c2440 support
- *	02-May-2005  BJD  Reduced hwcontrol decode
- *	20-Jun-2005  BJD  Updated s3c2440 support, fixed timing bug
- *	08-Jul-2005  BJD  Fix OOPS when no platform data supplied
- *	20-Oct-2005  BJD  Fix timing calculation bug
- *	14-Jan-2006  BJD  Allow clock to be stopped when idle
+ * Samsung S3C2410/S3C2440/S3C2412 NAND driver
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
-- 
cgit v1.2.3


From 4474573a90bae41351fad576fa80c424d62be567 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 5 Jun 2008 09:43:03 -0700
Subject: [MTD] [NAND] nandsim: missing header for do_div

Fix nandsim build error, missing #include:

linux-next-20080605/drivers/mtd/nand/nandsim.c: In function 'divide':
linux-next-20080605/drivers/mtd/nand/nandsim.c:462: error: implicit declaration of function 'do_div'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/nandsim.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index add975a229a..ecd70e2504f 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -37,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/list.h>
 #include <linux/random.h>
+#include <asm/div64.h>
 
 /* Default simulator parameters values */
 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE)  || \
-- 
cgit v1.2.3


From aa83570e23e626fe8dd1253f17e6d175507025f1 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 6 Jun 2008 18:59:40 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: fix section mismatch between probe and
 remove

WARNING: drivers/mtd/nand/built-in.o(.devinit.text+0x114): Section mismatch
in reference from the function fsl_elbc_ctrl_probe() to the function
.devexit.text:fsl_elbc_ctrl_remove()

__devinit functions should not call functions with __devexit. Since probe
function calls remove in case of errors, we want to remove __devexit
attribute from it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 4b69aacdf5c..1b06d29dd06 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -917,7 +917,7 @@ static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
 	return 0;
 }
 
-static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
+static int fsl_elbc_ctrl_remove(struct of_device *ofdev)
 {
 	struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
 	int i;
@@ -1041,7 +1041,7 @@ static struct of_platform_driver fsl_elbc_ctrl_driver = {
 	},
 	.match_table = fsl_elbc_match,
 	.probe = fsl_elbc_ctrl_probe,
-	.remove = __devexit_p(fsl_elbc_ctrl_remove),
+	.remove = fsl_elbc_ctrl_remove,
 };
 
 static int __init fsl_elbc_init(void)
-- 
cgit v1.2.3


From 62fd71fe710886ba449e932ad7877f4a8340c2d4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:51 +0200
Subject: [MTD] [NAND] at91_nand: Convert to generic GPIO API
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

No point in using an AT91-specific GPIO API when the generic API works
just as well.

Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/at91_nand.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c
index 0adb287027a..2dcaeeae206 100644
--- a/drivers/mtd/nand/at91_nand.c
+++ b/drivers/mtd/nand/at91_nand.c
@@ -31,12 +31,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
+#include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/sizes.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
 
 #ifdef CONFIG_MTD_NAND_AT91_ECC_HW
 #define hard_ecc	1
@@ -99,7 +97,7 @@ struct at91_nand_host {
 static void at91_nand_enable(struct at91_nand_host *host)
 {
 	if (host->board->enable_pin)
-		at91_set_gpio_value(host->board->enable_pin, 0);
+		gpio_set_value(host->board->enable_pin, 0);
 }
 
 /*
@@ -108,7 +106,7 @@ static void at91_nand_enable(struct at91_nand_host *host)
 static void at91_nand_disable(struct at91_nand_host *host)
 {
 	if (host->board->enable_pin)
-		at91_set_gpio_value(host->board->enable_pin, 1);
+		gpio_set_value(host->board->enable_pin, 1);
 }
 
 /*
@@ -142,7 +140,7 @@ static int at91_nand_device_ready(struct mtd_info *mtd)
 	struct nand_chip *nand_chip = mtd->priv;
 	struct at91_nand_host *host = nand_chip->priv;
 
-	return at91_get_gpio_value(host->board->rdy_pin);
+	return gpio_get_value(host->board->rdy_pin);
 }
 
 /*
@@ -447,7 +445,7 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 	at91_nand_enable(host);
 
 	if (host->board->det_pin) {
-		if (at91_get_gpio_value(host->board->det_pin)) {
+		if (gpio_get_value(host->board->det_pin)) {
 			printk ("No SmartMedia card inserted.\n");
 			res = ENXIO;
 			goto out;
-- 
cgit v1.2.3


From d4f4c0aa8e36f69e46360b3d3569dc15d6099894 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:52 +0200
Subject: [MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The AT91 NAND driver needs just a few tiny modifications to work on
AVR32 as well. Rename it atmel_nand to reflect this.

Also move the ECC register definitions into drivers/mtd/nand since they
are only useful to the atmel_nand driver, and get rid of the useless
filename at the top of each file.

Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/Kconfig             |  17 +-
 drivers/mtd/nand/Makefile            |   2 +-
 drivers/mtd/nand/at91_nand.c         | 592 -----------------------------------
 drivers/mtd/nand/atmel_nand.c        | 590 ++++++++++++++++++++++++++++++++++
 drivers/mtd/nand/atmel_nand_ecc.h    |  36 +++
 include/asm-arm/arch-at91/at91_ecc.h |  38 ---
 6 files changed, 636 insertions(+), 639 deletions(-)
 delete mode 100644 drivers/mtd/nand/at91_nand.c
 create mode 100644 drivers/mtd/nand/atmel_nand.c
 create mode 100644 drivers/mtd/nand/atmel_nand_ecc.h
 delete mode 100644 include/asm-arm/arch-at91/at91_ecc.h

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7dea6c3a660..cdd2952c153 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -271,7 +271,7 @@ config MTD_NAND_CS553X
 
 	  If you say "m", the module will be called "cs553x_nand.ko".
 
-config MTD_NAND_AT91
+config MTD_NAND_ATMEL
 	bool "Support for NAND Flash / SmartMedia on AT91"
 	depends on ARCH_AT91
 	help
@@ -279,14 +279,15 @@ config MTD_NAND_AT91
 	  on Atmel AT91 processors.
 choice
 	prompt "ECC management for NAND Flash / SmartMedia on AT91"
-	depends on MTD_NAND_AT91
+	depends on MTD_NAND_ATMEL
 
-config MTD_NAND_AT91_ECC_HW
+config MTD_NAND_ATMEL_ECC_HW
 	bool "Hardware ECC"
 	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260
 	help
-	  Uses hardware ECC provided by the at91sam9260/at91sam9263 chip
-	  instead of software ECC.
+	  Use hardware ECC instead of software ECC when the chip
+	  supports it.
+
 	  The hardware ECC controller is capable of single bit error
 	  correction and 2-bit random detection per page.
 
@@ -296,16 +297,16 @@ config MTD_NAND_AT91_ECC_HW
 
 	  If unsure, say Y
 
-config MTD_NAND_AT91_ECC_SOFT
+config MTD_NAND_ATMEL_ECC_SOFT
 	bool "Software ECC"
 	help
-	  Uses software ECC.
+	  Use software ECC.
 
 	  NB : hardware and software ECC schemes are incompatible.
 	  If you switch from one to another, you'll have to erase your
 	  mtd partition.
 
-config MTD_NAND_AT91_ECC_NONE
+config MTD_NAND_ATMEL_ECC_NONE
 	bool "No ECC (testing only, DANGEROUS)"
 	depends on DEBUG_KERNEL
 	help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d95a10c5186..d772581de57 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_MTD_NAND_TS7250)		+= ts7250.o
 obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
-obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nand.o
+obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c
deleted file mode 100644
index 2dcaeeae206..00000000000
--- a/drivers/mtd/nand/at91_nand.c
+++ /dev/null
@@ -1,592 +0,0 @@
-/*
- * drivers/mtd/nand/at91_nand.c
- *
- *  Copyright (C) 2003 Rick Bronson
- *
- *  Derived from drivers/mtd/nand/autcpu12.c
- *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- *  Derived from drivers/mtd/spia.c
- *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
- *
- *
- *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
- *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
- *
- *     Derived from Das U-Boot source code
- *     		(u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
- *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/gpio.h>
-#include <asm/io.h>
-
-#include <asm/arch/board.h>
-
-#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
-#define hard_ecc	1
-#else
-#define hard_ecc	0
-#endif
-
-#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
-#define no_ecc		1
-#else
-#define no_ecc		0
-#endif
-
-/* Register access macros */
-#define ecc_readl(add, reg)				\
-	__raw_readl(add + AT91_ECC_##reg)
-#define ecc_writel(add, reg, value)			\
-	__raw_writel((value), add + AT91_ECC_##reg)
-
-#include <asm/arch/at91_ecc.h> /* AT91SAM9260/3 ECC registers */
-
-/* oob layout for large page size
- * bad block info is on bytes 0 and 1
- * the bytes have to be consecutives to avoid
- * several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout at91_oobinfo_large = {
-	.eccbytes = 4,
-	.eccpos = {60, 61, 62, 63},
-	.oobfree = {
-		{2, 58}
-	},
-};
-
-/* oob layout for small page size
- * bad block info is on bytes 4 and 5
- * the bytes have to be consecutives to avoid
- * several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout at91_oobinfo_small = {
-	.eccbytes = 4,
-	.eccpos = {0, 1, 2, 3},
-	.oobfree = {
-		{6, 10}
-	},
-};
-
-struct at91_nand_host {
-	struct nand_chip	nand_chip;
-	struct mtd_info		mtd;
-	void __iomem		*io_base;
-	struct at91_nand_data	*board;
-	struct device		*dev;
-	void __iomem		*ecc;
-};
-
-/*
- * Enable NAND.
- */
-static void at91_nand_enable(struct at91_nand_host *host)
-{
-	if (host->board->enable_pin)
-		gpio_set_value(host->board->enable_pin, 0);
-}
-
-/*
- * Disable NAND.
- */
-static void at91_nand_disable(struct at91_nand_host *host)
-{
-	if (host->board->enable_pin)
-		gpio_set_value(host->board->enable_pin, 1);
-}
-
-/*
- * Hardware specific access to control-lines
- */
-static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_NCE)
-			at91_nand_enable(host);
-		else
-			at91_nand_disable(host);
-	}
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, host->io_base + (1 << host->board->cle));
-	else
-		writeb(cmd, host->io_base + (1 << host->board->ale));
-}
-
-/*
- * Read the Device Ready pin.
- */
-static int at91_nand_device_ready(struct mtd_info *mtd)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-
-	return gpio_get_value(host->board->rdy_pin);
-}
-
-/*
- * write oob for small pages
- */
-static int at91_nand_write_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip, int page)
-{
-	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-	int eccsize = chip->ecc.size, length = mtd->oobsize;
-	int len, pos, status = 0;
-	const uint8_t *bufpoi = chip->oob_poi;
-
-	pos = eccsize + chunk;
-
-	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-	len = min_t(int, length, chunk);
-	chip->write_buf(mtd, bufpoi, len);
-	bufpoi += len;
-	length -= len;
-	if (length > 0)
-		chip->write_buf(mtd, bufpoi, length);
-
-	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-	status = chip->waitfunc(mtd, chip);
-
-	return status & NAND_STATUS_FAIL ? -EIO : 0;
-
-}
-
-/*
- * read oob for small pages
- */
-static int at91_nand_read_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip,	int page, int sndcmd)
-{
-	if (sndcmd) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-		sndcmd = 0;
-	}
-	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return sndcmd;
-}
-
-/*
- * Calculate HW ECC
- *
- * function called after a write
- *
- * mtd:        MTD block structure
- * dat:        raw data (unused)
- * ecc_code:   buffer for ECC
- */
-static int at91_nand_calculate(struct mtd_info *mtd,
-		const u_char *dat, unsigned char *ecc_code)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
-	unsigned int ecc_value;
-
-	/* get the first 2 ECC bytes */
-	ecc_value = ecc_readl(host->ecc, PR);
-
-	ecc_code[eccpos[0]] = ecc_value & 0xFF;
-	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
-
-	/* get the last 2 ECC bytes */
-	ecc_value = ecc_readl(host->ecc, NPR) & AT91_ECC_NPARITY;
-
-	ecc_code[eccpos[2]] = ecc_value & 0xFF;
-	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
-
-	return 0;
-}
-
-/*
- * HW ECC read page function
- *
- * mtd:        mtd info structure
- * chip:       nand chip info structure
- * buf:        buffer to store read data
- */
-static int at91_nand_read_page(struct mtd_info *mtd,
-		struct nand_chip *chip, uint8_t *buf)
-{
-	int eccsize = chip->ecc.size;
-	int eccbytes = chip->ecc.bytes;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
-	uint8_t *p = buf;
-	uint8_t *oob = chip->oob_poi;
-	uint8_t *ecc_pos;
-	int stat;
-
-	/* read the page */
-	chip->read_buf(mtd, p, eccsize);
-
-	/* move to ECC position if needed */
-	if (eccpos[0] != 0) {
-		/* This only works on large pages
-		 * because the ECC controller waits for
-		 * NAND_CMD_RNDOUTSTART after the
-		 * NAND_CMD_RNDOUT.
-		 * anyway, for small pages, the eccpos[0] == 0
-		 */
-		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-				mtd->writesize + eccpos[0], -1);
-	}
-
-	/* the ECC controller needs to read the ECC just after the data */
-	ecc_pos = oob + eccpos[0];
-	chip->read_buf(mtd, ecc_pos, eccbytes);
-
-	/* check if there's an error */
-	stat = chip->ecc.correct(mtd, p, oob, NULL);
-
-	if (stat < 0)
-		mtd->ecc_stats.failed++;
-	else
-		mtd->ecc_stats.corrected += stat;
-
-	/* get back to oob start (end of page) */
-	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
-
-	/* read the oob */
-	chip->read_buf(mtd, oob, mtd->oobsize);
-
-	return 0;
-}
-
-/*
- * HW ECC Correction
- *
- * function called after a read
- *
- * mtd:        MTD block structure
- * dat:        raw data read from the chip
- * read_ecc:   ECC from the chip (unused)
- * isnull:     unused
- *
- * Detect and correct a 1 bit error for a page
- */
-static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
-		u_char *read_ecc, u_char *isnull)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-	unsigned int ecc_status;
-	unsigned int ecc_word, ecc_bit;
-
-	/* get the status from the Status Register */
-	ecc_status = ecc_readl(host->ecc, SR);
-
-	/* if there's no error */
-	if (likely(!(ecc_status & AT91_ECC_RECERR)))
-		return 0;
-
-	/* get error bit offset (4 bits) */
-	ecc_bit = ecc_readl(host->ecc, PR) & AT91_ECC_BITADDR;
-	/* get word address (12 bits) */
-	ecc_word = ecc_readl(host->ecc, PR) & AT91_ECC_WORDADDR;
-	ecc_word >>= 4;
-
-	/* if there are multiple errors */
-	if (ecc_status & AT91_ECC_MULERR) {
-		/* check if it is a freshly erased block
-		 * (filled with 0xff) */
-		if ((ecc_bit == AT91_ECC_BITADDR)
-				&& (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
-			/* the block has just been erased, return OK */
-			return 0;
-		}
-		/* it doesn't seems to be a freshly
-		 * erased block.
-		 * We can't correct so many errors */
-		dev_dbg(host->dev, "at91_nand : multiple errors detected."
-				" Unable to correct.\n");
-		return -EIO;
-	}
-
-	/* if there's a single bit error : we can correct it */
-	if (ecc_status & AT91_ECC_ECCERR) {
-		/* there's nothing much to do here.
-		 * the bit error is on the ECC itself.
-		 */
-		dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
-				" Nothing to correct\n");
-		return 0;
-	}
-
-	dev_dbg(host->dev, "at91_nand : one bit error on data."
-			" (word offset in the page :"
-			" 0x%x bit offset : 0x%x)\n",
-			ecc_word, ecc_bit);
-	/* correct the error */
-	if (nand_chip->options & NAND_BUSWIDTH_16) {
-		/* 16 bits words */
-		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
-	} else {
-		/* 8 bits words */
-		dat[ecc_word] ^= (1 << ecc_bit);
-	}
-	dev_dbg(host->dev, "at91_nand : error corrected\n");
-	return 1;
-}
-
-/*
- * Enable HW ECC : unsused
- */
-static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
-/*
- * Probe for the NAND device.
- */
-static int __init at91_nand_probe(struct platform_device *pdev)
-{
-	struct at91_nand_host *host;
-	struct mtd_info *mtd;
-	struct nand_chip *nand_chip;
-	struct resource *regs;
-	struct resource *mem;
-	int res;
-
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *partitions = NULL;
-	int num_partitions = 0;
-#endif
-
-	/* Allocate memory for the device structure (and zero it) */
-	host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
-	if (!host) {
-		printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
-		return -ENOMEM;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
-		return -ENXIO;
-	}
-
-	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
-	if (host->io_base == NULL) {
-		printk(KERN_ERR "at91_nand: ioremap failed\n");
-		kfree(host);
-		return -EIO;
-	}
-
-	mtd = &host->mtd;
-	nand_chip = &host->nand_chip;
-	host->board = pdev->dev.platform_data;
-	host->dev = &pdev->dev;
-
-	nand_chip->priv = host;		/* link the private data structures */
-	mtd->priv = nand_chip;
-	mtd->owner = THIS_MODULE;
-
-	/* Set address of NAND IO lines */
-	nand_chip->IO_ADDR_R = host->io_base;
-	nand_chip->IO_ADDR_W = host->io_base;
-	nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
-
-	if (host->board->rdy_pin)
-		nand_chip->dev_ready = at91_nand_device_ready;
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!regs && hard_ecc) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource "
-				"regs\nFalling back on software ECC\n");
-	}
-
-	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
-	if (no_ecc)
-		nand_chip->ecc.mode = NAND_ECC_NONE;
-	if (hard_ecc && regs) {
-		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
-		if (host->ecc == NULL) {
-			printk(KERN_ERR "at91_nand: ioremap failed\n");
-			res = -EIO;
-			goto err_ecc_ioremap;
-		}
-		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-		nand_chip->ecc.calculate = at91_nand_calculate;
-		nand_chip->ecc.correct = at91_nand_correct;
-		nand_chip->ecc.hwctl = at91_nand_hwctl;
-		nand_chip->ecc.read_page = at91_nand_read_page;
-		nand_chip->ecc.bytes = 4;
-		nand_chip->ecc.prepad = 0;
-		nand_chip->ecc.postpad = 0;
-	}
-
-	nand_chip->chip_delay = 20;		/* 20us command delay time */
-
-	if (host->board->bus_width_16)		/* 16-bit bus width */
-		nand_chip->options |= NAND_BUSWIDTH_16;
-
-	platform_set_drvdata(pdev, host);
-	at91_nand_enable(host);
-
-	if (host->board->det_pin) {
-		if (gpio_get_value(host->board->det_pin)) {
-			printk ("No SmartMedia card inserted.\n");
-			res = ENXIO;
-			goto out;
-		}
-	}
-
-	/* first scan to find the device and get the page size */
-	if (nand_scan_ident(mtd, 1)) {
-		res = -ENXIO;
-		goto out;
-	}
-
-	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
-		/* ECC is calculated for the whole page (1 step) */
-		nand_chip->ecc.size = mtd->writesize;
-
-		/* set ECC page size and oob layout */
-		switch (mtd->writesize) {
-		case 512:
-			nand_chip->ecc.layout = &at91_oobinfo_small;
-			nand_chip->ecc.read_oob = at91_nand_read_oob_512;
-			nand_chip->ecc.write_oob = at91_nand_write_oob_512;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_528);
-			break;
-		case 1024:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_1056);
-			break;
-		case 2048:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_2112);
-			break;
-		case 4096:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_4224);
-			break;
-		default:
-			/* page size not handled by HW ECC */
-			/* switching back to soft ECC */
-			nand_chip->ecc.mode = NAND_ECC_SOFT;
-			nand_chip->ecc.calculate = NULL;
-			nand_chip->ecc.correct = NULL;
-			nand_chip->ecc.hwctl = NULL;
-			nand_chip->ecc.read_page = NULL;
-			nand_chip->ecc.postpad = 0;
-			nand_chip->ecc.prepad = 0;
-			nand_chip->ecc.bytes = 0;
-			break;
-		}
-	}
-
-	/* second phase scan */
-	if (nand_scan_tail(mtd)) {
-		res = -ENXIO;
-		goto out;
-	}
-
-#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd->name = "at91_nand";
-	num_partitions = parse_mtd_partitions(mtd, part_probes,
-					      &partitions, 0);
-#endif
-	if (num_partitions <= 0 && host->board->partition_info)
-		partitions = host->board->partition_info(mtd->size,
-							 &num_partitions);
-
-	if ((!partitions) || (num_partitions == 0)) {
-		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
-		res = ENXIO;
-		goto release;
-	}
-
-	res = add_mtd_partitions(mtd, partitions, num_partitions);
-#else
-	res = add_mtd_device(mtd);
-#endif
-
-	if (!res)
-		return res;
-
-#ifdef CONFIG_MTD_PARTITIONS
-release:
-#endif
-	nand_release(mtd);
-
-out:
-	iounmap(host->ecc);
-
-err_ecc_ioremap:
-	at91_nand_disable(host);
-	platform_set_drvdata(pdev, NULL);
-	iounmap(host->io_base);
-	kfree(host);
-	return res;
-}
-
-/*
- * Remove a NAND device.
- */
-static int __devexit at91_nand_remove(struct platform_device *pdev)
-{
-	struct at91_nand_host *host = platform_get_drvdata(pdev);
-	struct mtd_info *mtd = &host->mtd;
-
-	nand_release(mtd);
-
-	at91_nand_disable(host);
-
-	iounmap(host->io_base);
-	iounmap(host->ecc);
-	kfree(host);
-
-	return 0;
-}
-
-static struct platform_driver at91_nand_driver = {
-	.probe		= at91_nand_probe,
-	.remove		= at91_nand_remove,
-	.driver		= {
-		.name	= "at91_nand",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init at91_nand_init(void)
-{
-	return platform_driver_register(&at91_nand_driver);
-}
-
-
-static void __exit at91_nand_exit(void)
-{
-	platform_driver_unregister(&at91_nand_driver);
-}
-
-
-module_init(at91_nand_init);
-module_exit(at91_nand_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Rick Bronson");
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9");
-MODULE_ALIAS("platform:at91_nand");
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
new file mode 100644
index 00000000000..51b703155db
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -0,0 +1,590 @@
+/*
+ *  Copyright (C) 2003 Rick Bronson
+ *
+ *  Derived from drivers/mtd/nand/autcpu12.c
+ *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ *  Derived from drivers/mtd/spia.c
+ *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
+ *
+ *
+ *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
+ *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
+ *
+ *     Derived from Das U-Boot source code
+ *     		(u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
+ *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#include <asm/arch/board.h>
+
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
+#define hard_ecc	1
+#else
+#define hard_ecc	0
+#endif
+
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
+#define no_ecc		1
+#else
+#define no_ecc		0
+#endif
+
+/* Register access macros */
+#define ecc_readl(add, reg)				\
+	__raw_readl(add + AT91_ECC_##reg)
+#define ecc_writel(add, reg, value)			\
+	__raw_writel((value), add + AT91_ECC_##reg)
+
+#include "atmel_nand_ecc.h"	/* Hardware ECC registers */
+
+/* oob layout for large page size
+ * bad block info is on bytes 0 and 1
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout at91_oobinfo_large = {
+	.eccbytes = 4,
+	.eccpos = {60, 61, 62, 63},
+	.oobfree = {
+		{2, 58}
+	},
+};
+
+/* oob layout for small page size
+ * bad block info is on bytes 4 and 5
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout at91_oobinfo_small = {
+	.eccbytes = 4,
+	.eccpos = {0, 1, 2, 3},
+	.oobfree = {
+		{6, 10}
+	},
+};
+
+struct at91_nand_host {
+	struct nand_chip	nand_chip;
+	struct mtd_info		mtd;
+	void __iomem		*io_base;
+	struct at91_nand_data	*board;
+	struct device		*dev;
+	void __iomem		*ecc;
+};
+
+/*
+ * Enable NAND.
+ */
+static void at91_nand_enable(struct at91_nand_host *host)
+{
+	if (host->board->enable_pin)
+		gpio_set_value(host->board->enable_pin, 0);
+}
+
+/*
+ * Disable NAND.
+ */
+static void at91_nand_disable(struct at91_nand_host *host)
+{
+	if (host->board->enable_pin)
+		gpio_set_value(host->board->enable_pin, 1);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct at91_nand_host *host = nand_chip->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_NCE)
+			at91_nand_enable(host);
+		else
+			at91_nand_disable(host);
+	}
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, host->io_base + (1 << host->board->cle));
+	else
+		writeb(cmd, host->io_base + (1 << host->board->ale));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int at91_nand_device_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct at91_nand_host *host = nand_chip->priv;
+
+	return gpio_get_value(host->board->rdy_pin);
+}
+
+/*
+ * write oob for small pages
+ */
+static int at91_nand_write_oob_512(struct mtd_info *mtd,
+		struct nand_chip *chip, int page)
+{
+	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+	int eccsize = chip->ecc.size, length = mtd->oobsize;
+	int len, pos, status = 0;
+	const uint8_t *bufpoi = chip->oob_poi;
+
+	pos = eccsize + chunk;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
+	len = min_t(int, length, chunk);
+	chip->write_buf(mtd, bufpoi, len);
+	bufpoi += len;
+	length -= len;
+	if (length > 0)
+		chip->write_buf(mtd, bufpoi, length);
+
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+	status = chip->waitfunc(mtd, chip);
+
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
+
+}
+
+/*
+ * read oob for small pages
+ */
+static int at91_nand_read_oob_512(struct mtd_info *mtd,
+		struct nand_chip *chip,	int page, int sndcmd)
+{
+	if (sndcmd) {
+		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+		sndcmd = 0;
+	}
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	return sndcmd;
+}
+
+/*
+ * Calculate HW ECC
+ *
+ * function called after a write
+ *
+ * mtd:        MTD block structure
+ * dat:        raw data (unused)
+ * ecc_code:   buffer for ECC
+ */
+static int at91_nand_calculate(struct mtd_info *mtd,
+		const u_char *dat, unsigned char *ecc_code)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct at91_nand_host *host = nand_chip->priv;
+	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
+	unsigned int ecc_value;
+
+	/* get the first 2 ECC bytes */
+	ecc_value = ecc_readl(host->ecc, PR);
+
+	ecc_code[eccpos[0]] = ecc_value & 0xFF;
+	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
+
+	/* get the last 2 ECC bytes */
+	ecc_value = ecc_readl(host->ecc, NPR) & AT91_ECC_NPARITY;
+
+	ecc_code[eccpos[2]] = ecc_value & 0xFF;
+	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
+
+	return 0;
+}
+
+/*
+ * HW ECC read page function
+ *
+ * mtd:        mtd info structure
+ * chip:       nand chip info structure
+ * buf:        buffer to store read data
+ */
+static int at91_nand_read_page(struct mtd_info *mtd,
+		struct nand_chip *chip, uint8_t *buf)
+{
+	int eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *p = buf;
+	uint8_t *oob = chip->oob_poi;
+	uint8_t *ecc_pos;
+	int stat;
+
+	/* read the page */
+	chip->read_buf(mtd, p, eccsize);
+
+	/* move to ECC position if needed */
+	if (eccpos[0] != 0) {
+		/* This only works on large pages
+		 * because the ECC controller waits for
+		 * NAND_CMD_RNDOUTSTART after the
+		 * NAND_CMD_RNDOUT.
+		 * anyway, for small pages, the eccpos[0] == 0
+		 */
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+				mtd->writesize + eccpos[0], -1);
+	}
+
+	/* the ECC controller needs to read the ECC just after the data */
+	ecc_pos = oob + eccpos[0];
+	chip->read_buf(mtd, ecc_pos, eccbytes);
+
+	/* check if there's an error */
+	stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+	if (stat < 0)
+		mtd->ecc_stats.failed++;
+	else
+		mtd->ecc_stats.corrected += stat;
+
+	/* get back to oob start (end of page) */
+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+
+	/* read the oob */
+	chip->read_buf(mtd, oob, mtd->oobsize);
+
+	return 0;
+}
+
+/*
+ * HW ECC Correction
+ *
+ * function called after a read
+ *
+ * mtd:        MTD block structure
+ * dat:        raw data read from the chip
+ * read_ecc:   ECC from the chip (unused)
+ * isnull:     unused
+ *
+ * Detect and correct a 1 bit error for a page
+ */
+static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
+		u_char *read_ecc, u_char *isnull)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct at91_nand_host *host = nand_chip->priv;
+	unsigned int ecc_status;
+	unsigned int ecc_word, ecc_bit;
+
+	/* get the status from the Status Register */
+	ecc_status = ecc_readl(host->ecc, SR);
+
+	/* if there's no error */
+	if (likely(!(ecc_status & AT91_ECC_RECERR)))
+		return 0;
+
+	/* get error bit offset (4 bits) */
+	ecc_bit = ecc_readl(host->ecc, PR) & AT91_ECC_BITADDR;
+	/* get word address (12 bits) */
+	ecc_word = ecc_readl(host->ecc, PR) & AT91_ECC_WORDADDR;
+	ecc_word >>= 4;
+
+	/* if there are multiple errors */
+	if (ecc_status & AT91_ECC_MULERR) {
+		/* check if it is a freshly erased block
+		 * (filled with 0xff) */
+		if ((ecc_bit == AT91_ECC_BITADDR)
+				&& (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
+			/* the block has just been erased, return OK */
+			return 0;
+		}
+		/* it doesn't seems to be a freshly
+		 * erased block.
+		 * We can't correct so many errors */
+		dev_dbg(host->dev, "at91_nand : multiple errors detected."
+				" Unable to correct.\n");
+		return -EIO;
+	}
+
+	/* if there's a single bit error : we can correct it */
+	if (ecc_status & AT91_ECC_ECCERR) {
+		/* there's nothing much to do here.
+		 * the bit error is on the ECC itself.
+		 */
+		dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
+				" Nothing to correct\n");
+		return 0;
+	}
+
+	dev_dbg(host->dev, "at91_nand : one bit error on data."
+			" (word offset in the page :"
+			" 0x%x bit offset : 0x%x)\n",
+			ecc_word, ecc_bit);
+	/* correct the error */
+	if (nand_chip->options & NAND_BUSWIDTH_16) {
+		/* 16 bits words */
+		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
+	} else {
+		/* 8 bits words */
+		dat[ecc_word] ^= (1 << ecc_bit);
+	}
+	dev_dbg(host->dev, "at91_nand : error corrected\n");
+	return 1;
+}
+
+/*
+ * Enable HW ECC : unsused
+ */
+static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/*
+ * Probe for the NAND device.
+ */
+static int __init at91_nand_probe(struct platform_device *pdev)
+{
+	struct at91_nand_host *host;
+	struct mtd_info *mtd;
+	struct nand_chip *nand_chip;
+	struct resource *regs;
+	struct resource *mem;
+	int res;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *partitions = NULL;
+	int num_partitions = 0;
+#endif
+
+	/* Allocate memory for the device structure (and zero it) */
+	host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
+	if (!host) {
+		printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
+		return -ENOMEM;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
+		return -ENXIO;
+	}
+
+	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
+	if (host->io_base == NULL) {
+		printk(KERN_ERR "at91_nand: ioremap failed\n");
+		kfree(host);
+		return -EIO;
+	}
+
+	mtd = &host->mtd;
+	nand_chip = &host->nand_chip;
+	host->board = pdev->dev.platform_data;
+	host->dev = &pdev->dev;
+
+	nand_chip->priv = host;		/* link the private data structures */
+	mtd->priv = nand_chip;
+	mtd->owner = THIS_MODULE;
+
+	/* Set address of NAND IO lines */
+	nand_chip->IO_ADDR_R = host->io_base;
+	nand_chip->IO_ADDR_W = host->io_base;
+	nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
+
+	if (host->board->rdy_pin)
+		nand_chip->dev_ready = at91_nand_device_ready;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!regs && hard_ecc) {
+		printk(KERN_ERR "at91_nand: can't get I/O resource "
+				"regs\nFalling back on software ECC\n");
+	}
+
+	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
+	if (no_ecc)
+		nand_chip->ecc.mode = NAND_ECC_NONE;
+	if (hard_ecc && regs) {
+		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
+		if (host->ecc == NULL) {
+			printk(KERN_ERR "at91_nand: ioremap failed\n");
+			res = -EIO;
+			goto err_ecc_ioremap;
+		}
+		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+		nand_chip->ecc.calculate = at91_nand_calculate;
+		nand_chip->ecc.correct = at91_nand_correct;
+		nand_chip->ecc.hwctl = at91_nand_hwctl;
+		nand_chip->ecc.read_page = at91_nand_read_page;
+		nand_chip->ecc.bytes = 4;
+		nand_chip->ecc.prepad = 0;
+		nand_chip->ecc.postpad = 0;
+	}
+
+	nand_chip->chip_delay = 20;		/* 20us command delay time */
+
+	if (host->board->bus_width_16)		/* 16-bit bus width */
+		nand_chip->options |= NAND_BUSWIDTH_16;
+
+	platform_set_drvdata(pdev, host);
+	at91_nand_enable(host);
+
+	if (host->board->det_pin) {
+		if (gpio_get_value(host->board->det_pin)) {
+			printk ("No SmartMedia card inserted.\n");
+			res = ENXIO;
+			goto out;
+		}
+	}
+
+	/* first scan to find the device and get the page size */
+	if (nand_scan_ident(mtd, 1)) {
+		res = -ENXIO;
+		goto out;
+	}
+
+	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
+		/* ECC is calculated for the whole page (1 step) */
+		nand_chip->ecc.size = mtd->writesize;
+
+		/* set ECC page size and oob layout */
+		switch (mtd->writesize) {
+		case 512:
+			nand_chip->ecc.layout = &at91_oobinfo_small;
+			nand_chip->ecc.read_oob = at91_nand_read_oob_512;
+			nand_chip->ecc.write_oob = at91_nand_write_oob_512;
+			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_528);
+			break;
+		case 1024:
+			nand_chip->ecc.layout = &at91_oobinfo_large;
+			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_1056);
+			break;
+		case 2048:
+			nand_chip->ecc.layout = &at91_oobinfo_large;
+			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_2112);
+			break;
+		case 4096:
+			nand_chip->ecc.layout = &at91_oobinfo_large;
+			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_4224);
+			break;
+		default:
+			/* page size not handled by HW ECC */
+			/* switching back to soft ECC */
+			nand_chip->ecc.mode = NAND_ECC_SOFT;
+			nand_chip->ecc.calculate = NULL;
+			nand_chip->ecc.correct = NULL;
+			nand_chip->ecc.hwctl = NULL;
+			nand_chip->ecc.read_page = NULL;
+			nand_chip->ecc.postpad = 0;
+			nand_chip->ecc.prepad = 0;
+			nand_chip->ecc.bytes = 0;
+			break;
+		}
+	}
+
+	/* second phase scan */
+	if (nand_scan_tail(mtd)) {
+		res = -ENXIO;
+		goto out;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	mtd->name = "at91_nand";
+	num_partitions = parse_mtd_partitions(mtd, part_probes,
+					      &partitions, 0);
+#endif
+	if (num_partitions <= 0 && host->board->partition_info)
+		partitions = host->board->partition_info(mtd->size,
+							 &num_partitions);
+
+	if ((!partitions) || (num_partitions == 0)) {
+		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+		res = ENXIO;
+		goto release;
+	}
+
+	res = add_mtd_partitions(mtd, partitions, num_partitions);
+#else
+	res = add_mtd_device(mtd);
+#endif
+
+	if (!res)
+		return res;
+
+#ifdef CONFIG_MTD_PARTITIONS
+release:
+#endif
+	nand_release(mtd);
+
+out:
+	iounmap(host->ecc);
+
+err_ecc_ioremap:
+	at91_nand_disable(host);
+	platform_set_drvdata(pdev, NULL);
+	iounmap(host->io_base);
+	kfree(host);
+	return res;
+}
+
+/*
+ * Remove a NAND device.
+ */
+static int __devexit at91_nand_remove(struct platform_device *pdev)
+{
+	struct at91_nand_host *host = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = &host->mtd;
+
+	nand_release(mtd);
+
+	at91_nand_disable(host);
+
+	iounmap(host->io_base);
+	iounmap(host->ecc);
+	kfree(host);
+
+	return 0;
+}
+
+static struct platform_driver at91_nand_driver = {
+	.probe		= at91_nand_probe,
+	.remove		= at91_nand_remove,
+	.driver		= {
+		.name	= "at91_nand",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init at91_nand_init(void)
+{
+	return platform_driver_register(&at91_nand_driver);
+}
+
+
+static void __exit at91_nand_exit(void)
+{
+	platform_driver_unregister(&at91_nand_driver);
+}
+
+
+module_init(at91_nand_init);
+module_exit(at91_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
+MODULE_ALIAS("platform:at91_nand");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 00000000000..170db869aac
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,36 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define AT91_ECC_CR		0x00			/* Control register */
+#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
+
+#define AT91_ECC_MR		0x04			/* Mode register */
+#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
+#define			AT91_ECC_PAGESIZE_528		(0)
+#define			AT91_ECC_PAGESIZE_1056		(1)
+#define			AT91_ECC_PAGESIZE_2112		(2)
+#define			AT91_ECC_PAGESIZE_4224		(3)
+
+#define AT91_ECC_SR		0x08			/* Status register */
+#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
+#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
+#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
+
+#define AT91_ECC_PR		0x0c			/* Parity register */
+#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
+#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
+
+#define AT91_ECC_NPR		0x10			/* NParity register */
+#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h
deleted file mode 100644
index 1e5a8caca2d..00000000000
--- a/include/asm-arm/arch-at91/at91_ecc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_ecc.h
- *
- * Error Corrected Code Controller (ECC) - System peripherals regsters.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef AT91_ECC_H
-#define AT91_ECC_H
-
-#define AT91_ECC_CR		0x00			/* Control register */
-#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
-
-#define AT91_ECC_MR		0x04			/* Mode register */
-#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
-#define			AT91_ECC_PAGESIZE_528		(0)
-#define			AT91_ECC_PAGESIZE_1056		(1)
-#define			AT91_ECC_PAGESIZE_2112		(2)
-#define			AT91_ECC_PAGESIZE_4224		(3)
-
-#define AT91_ECC_SR		0x08			/* Status register */
-#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
-#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
-#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
-
-#define AT91_ECC_PR		0x0c			/* Parity register */
-#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
-#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
-
-#define AT91_ECC_NPR		0x10			/* NParity register */
-#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
-
-#endif
-- 
cgit v1.2.3


From 3c3796cc32b6e53653a5eb868dc959b8c2779db9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:53 +0200
Subject: [MTD] [NAND] rename at91_nand -> atmel_nand: internal symbols
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is basically s/at91_nand/atmel_nand/g with some manual inspection.

Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 arch/arm/mach-at91/at91cap9_devices.c    |   8 +-
 arch/arm/mach-at91/at91rm9200_devices.c  |   8 +-
 arch/arm/mach-at91/at91sam9260_devices.c |   8 +-
 arch/arm/mach-at91/at91sam9261_devices.c |  12 +--
 arch/arm/mach-at91/at91sam9263_devices.c |   8 +-
 arch/arm/mach-at91/at91sam9rl_devices.c  |  12 +--
 arch/arm/mach-at91/board-cam60.c         |   2 +-
 arch/arm/mach-at91/board-cap9adk.c       |   2 +-
 arch/arm/mach-at91/board-dk.c            |   2 +-
 arch/arm/mach-at91/board-kb9202.c        |   2 +-
 arch/arm/mach-at91/board-sam9-l9260.c    |   2 +-
 arch/arm/mach-at91/board-sam9260ek.c     |   2 +-
 arch/arm/mach-at91/board-sam9261ek.c     |   2 +-
 arch/arm/mach-at91/board-sam9263ek.c     |   2 +-
 arch/arm/mach-at91/board-sam9rlek.c      |   2 +-
 arch/arm/mach-at91/board-yl-9200.c       |   2 +-
 drivers/mtd/nand/atmel_nand.c            | 152 +++++++++++++++----------------
 drivers/mtd/nand/atmel_nand_ecc.h        |  34 +++----
 include/asm-arm/arch-at91/board.h        |   4 +-
 19 files changed, 133 insertions(+), 133 deletions(-)

diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index be526746e01..fe5148e9f0c 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -278,7 +278,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -296,7 +296,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91cap9_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -305,7 +305,7 @@ static struct platform_device at91cap9_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -346,7 +346,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91cap9_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index de19bee83f7..8ced9bc8209 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -369,7 +369,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -382,7 +382,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91rm9200_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -391,7 +391,7 @@ static struct platform_device at91rm9200_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned int csa;
 
@@ -429,7 +429,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91rm9200_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 393a32aefce..3aa62b1151b 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -283,7 +283,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -301,7 +301,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9260_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -310,7 +310,7 @@ static struct platform_device at91sam9260_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -351,7 +351,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91sam9260_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 728bb8f3944..6b9e423ec47 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -199,7 +199,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -211,8 +211,8 @@ static struct resource nand_resources[] = {
 	}
 };
 
-static struct platform_device at91_nand_device = {
-	.name		= "at91_nand",
+static struct platform_device atmel_nand_device = {
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -221,7 +221,7 @@ static struct platform_device at91_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -262,11 +262,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
 
 	nand_data = *data;
-	platform_device_register(&at91_nand_device);
+	platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 719667e25c9..f1dfbfe094a 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -353,7 +353,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -371,7 +371,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9263_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -380,7 +380,7 @@ static struct platform_device at91sam9263_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -421,7 +421,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91sam9263_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 054689804e7..b21f3339326 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -100,7 +100,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -117,8 +117,8 @@ static struct resource nand_resources[] = {
 	}
 };
 
-static struct platform_device at91_nand_device = {
-	.name		= "at91_nand",
+static struct platform_device atmel_nand_device = {
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -127,7 +127,7 @@ static struct platform_device at91_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa;
 
@@ -164,11 +164,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */
 
 	nand_data = *data;
-	platform_device_register(&at91_nand_device);
+	platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index b22a1a00405..af2c33aff1a 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -142,7 +142,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return cam60_nand_partition;
 }
 
-static struct at91_nand_data __initdata cam60_nand_data = {
+static struct atmel_nand_data __initdata cam60_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	// .det_pin	= ... not there
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index e5512d1ff21..7144e1a89a2 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -175,7 +175,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return cap9adk_nand_partitions;
 }
 
-static struct at91_nand_data __initdata cap9adk_nand_data = {
+static struct atmel_nand_data __initdata cap9adk_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index c1a813c7169..ffecacb71f8 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -150,7 +150,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return dk_nand_partition;
 }
 
-static struct at91_nand_data __initdata dk_nand_data = {
+static struct atmel_nand_data __initdata dk_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	.det_pin	= AT91_PIN_PB1,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 4b39b9cda75..153450f168f 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -102,7 +102,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return kb9202_nand_partition;
 }
 
-static struct at91_nand_data __initdata kb9202_nand_data = {
+static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	// .det_pin	= ... not there
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 8f76af5e219..57a6221943e 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -141,7 +141,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4d1d9c77708..6a680795c3c 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -178,7 +178,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 08382c0df22..43dfbd0d543 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -183,7 +183,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 //	.det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b4cd5d0ed59..6605a098011 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -187,7 +187,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index ffc0597aee8..35e69e51f37 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -88,7 +88,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index b5717108991..e642b3a8bd1 100755
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -251,7 +251,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return yl_9200_nand_partition;
 }
 
-static struct at91_nand_data __initdata yl_9200_nand_data = {
+static struct atmel_nand_data __initdata yl_9200_nand_data = {
 	.ale= 6,
 	.cle= 7,
 	/*.det_pin	= AT91_PIN_PCxx,*/   /*we don't have a det pin because NandFlash is fixed to board*/
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 51b703155db..675a82ca77f 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -48,9 +48,9 @@
 
 /* Register access macros */
 #define ecc_readl(add, reg)				\
-	__raw_readl(add + AT91_ECC_##reg)
+	__raw_readl(add + ATMEL_ECC_##reg)
 #define ecc_writel(add, reg, value)			\
-	__raw_writel((value), add + AT91_ECC_##reg)
+	__raw_writel((value), add + ATMEL_ECC_##reg)
 
 #include "atmel_nand_ecc.h"	/* Hardware ECC registers */
 
@@ -59,7 +59,7 @@
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
-static struct nand_ecclayout at91_oobinfo_large = {
+static struct nand_ecclayout atmel_oobinfo_large = {
 	.eccbytes = 4,
 	.eccpos = {60, 61, 62, 63},
 	.oobfree = {
@@ -72,7 +72,7 @@ static struct nand_ecclayout at91_oobinfo_large = {
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
-static struct nand_ecclayout at91_oobinfo_small = {
+static struct nand_ecclayout atmel_oobinfo_small = {
 	.eccbytes = 4,
 	.eccpos = {0, 1, 2, 3},
 	.oobfree = {
@@ -80,11 +80,11 @@ static struct nand_ecclayout at91_oobinfo_small = {
 	},
 };
 
-struct at91_nand_host {
+struct atmel_nand_host {
 	struct nand_chip	nand_chip;
 	struct mtd_info		mtd;
 	void __iomem		*io_base;
-	struct at91_nand_data	*board;
+	struct atmel_nand_data	*board;
 	struct device		*dev;
 	void __iomem		*ecc;
 };
@@ -92,7 +92,7 @@ struct at91_nand_host {
 /*
  * Enable NAND.
  */
-static void at91_nand_enable(struct at91_nand_host *host)
+static void atmel_nand_enable(struct atmel_nand_host *host)
 {
 	if (host->board->enable_pin)
 		gpio_set_value(host->board->enable_pin, 0);
@@ -101,7 +101,7 @@ static void at91_nand_enable(struct at91_nand_host *host)
 /*
  * Disable NAND.
  */
-static void at91_nand_disable(struct at91_nand_host *host)
+static void atmel_nand_disable(struct atmel_nand_host *host)
 {
 	if (host->board->enable_pin)
 		gpio_set_value(host->board->enable_pin, 1);
@@ -110,16 +110,16 @@ static void at91_nand_disable(struct at91_nand_host *host)
 /*
  * Hardware specific access to control-lines
  */
-static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if (ctrl & NAND_NCE)
-			at91_nand_enable(host);
+			atmel_nand_enable(host);
 		else
-			at91_nand_disable(host);
+			atmel_nand_disable(host);
 	}
 	if (cmd == NAND_CMD_NONE)
 		return;
@@ -133,10 +133,10 @@ static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 /*
  * Read the Device Ready pin.
  */
-static int at91_nand_device_ready(struct mtd_info *mtd)
+static int atmel_nand_device_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 
 	return gpio_get_value(host->board->rdy_pin);
 }
@@ -144,7 +144,7 @@ static int at91_nand_device_ready(struct mtd_info *mtd)
 /*
  * write oob for small pages
  */
-static int at91_nand_write_oob_512(struct mtd_info *mtd,
+static int atmel_nand_write_oob_512(struct mtd_info *mtd,
 		struct nand_chip *chip, int page)
 {
 	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
@@ -172,7 +172,7 @@ static int at91_nand_write_oob_512(struct mtd_info *mtd,
 /*
  * read oob for small pages
  */
-static int at91_nand_read_oob_512(struct mtd_info *mtd,
+static int atmel_nand_read_oob_512(struct mtd_info *mtd,
 		struct nand_chip *chip,	int page, int sndcmd)
 {
 	if (sndcmd) {
@@ -192,11 +192,11 @@ static int at91_nand_read_oob_512(struct mtd_info *mtd,
  * dat:        raw data (unused)
  * ecc_code:   buffer for ECC
  */
-static int at91_nand_calculate(struct mtd_info *mtd,
+static int atmel_nand_calculate(struct mtd_info *mtd,
 		const u_char *dat, unsigned char *ecc_code)
 {
 	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
 	unsigned int ecc_value;
 
@@ -207,7 +207,7 @@ static int at91_nand_calculate(struct mtd_info *mtd,
 	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
 
 	/* get the last 2 ECC bytes */
-	ecc_value = ecc_readl(host->ecc, NPR) & AT91_ECC_NPARITY;
+	ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
 
 	ecc_code[eccpos[2]] = ecc_value & 0xFF;
 	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
@@ -222,7 +222,7 @@ static int at91_nand_calculate(struct mtd_info *mtd,
  * chip:       nand chip info structure
  * buf:        buffer to store read data
  */
-static int at91_nand_read_page(struct mtd_info *mtd,
+static int atmel_nand_read_page(struct mtd_info *mtd,
 		struct nand_chip *chip, uint8_t *buf)
 {
 	int eccsize = chip->ecc.size;
@@ -281,11 +281,11 @@ static int at91_nand_read_page(struct mtd_info *mtd,
  *
  * Detect and correct a 1 bit error for a page
  */
-static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 		u_char *read_ecc, u_char *isnull)
 {
 	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 	unsigned int ecc_status;
 	unsigned int ecc_word, ecc_bit;
 
@@ -293,43 +293,43 @@ static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
 	ecc_status = ecc_readl(host->ecc, SR);
 
 	/* if there's no error */
-	if (likely(!(ecc_status & AT91_ECC_RECERR)))
+	if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
 		return 0;
 
 	/* get error bit offset (4 bits) */
-	ecc_bit = ecc_readl(host->ecc, PR) & AT91_ECC_BITADDR;
+	ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
 	/* get word address (12 bits) */
-	ecc_word = ecc_readl(host->ecc, PR) & AT91_ECC_WORDADDR;
+	ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
 	ecc_word >>= 4;
 
 	/* if there are multiple errors */
-	if (ecc_status & AT91_ECC_MULERR) {
+	if (ecc_status & ATMEL_ECC_MULERR) {
 		/* check if it is a freshly erased block
 		 * (filled with 0xff) */
-		if ((ecc_bit == AT91_ECC_BITADDR)
-				&& (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
+		if ((ecc_bit == ATMEL_ECC_BITADDR)
+				&& (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
 			/* the block has just been erased, return OK */
 			return 0;
 		}
 		/* it doesn't seems to be a freshly
 		 * erased block.
 		 * We can't correct so many errors */
-		dev_dbg(host->dev, "at91_nand : multiple errors detected."
+		dev_dbg(host->dev, "atmel_nand : multiple errors detected."
 				" Unable to correct.\n");
 		return -EIO;
 	}
 
 	/* if there's a single bit error : we can correct it */
-	if (ecc_status & AT91_ECC_ECCERR) {
+	if (ecc_status & ATMEL_ECC_ECCERR) {
 		/* there's nothing much to do here.
 		 * the bit error is on the ECC itself.
 		 */
-		dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
+		dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
 				" Nothing to correct\n");
 		return 0;
 	}
 
-	dev_dbg(host->dev, "at91_nand : one bit error on data."
+	dev_dbg(host->dev, "atmel_nand : one bit error on data."
 			" (word offset in the page :"
 			" 0x%x bit offset : 0x%x)\n",
 			ecc_word, ecc_bit);
@@ -341,14 +341,14 @@ static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
 		/* 8 bits words */
 		dat[ecc_word] ^= (1 << ecc_bit);
 	}
-	dev_dbg(host->dev, "at91_nand : error corrected\n");
+	dev_dbg(host->dev, "atmel_nand : error corrected\n");
 	return 1;
 }
 
 /*
  * Enable HW ECC : unsused
  */
-static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { "cmdlinepart", NULL };
@@ -357,9 +357,9 @@ static const char *part_probes[] = { "cmdlinepart", NULL };
 /*
  * Probe for the NAND device.
  */
-static int __init at91_nand_probe(struct platform_device *pdev)
+static int __init atmel_nand_probe(struct platform_device *pdev)
 {
-	struct at91_nand_host *host;
+	struct atmel_nand_host *host;
 	struct mtd_info *mtd;
 	struct nand_chip *nand_chip;
 	struct resource *regs;
@@ -372,21 +372,21 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 #endif
 
 	/* Allocate memory for the device structure (and zero it) */
-	host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
+	host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
 	if (!host) {
-		printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
+		printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
 		return -ENOMEM;
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
+		printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
 		return -ENXIO;
 	}
 
 	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
 	if (host->io_base == NULL) {
-		printk(KERN_ERR "at91_nand: ioremap failed\n");
+		printk(KERN_ERR "atmel_nand: ioremap failed\n");
 		kfree(host);
 		return -EIO;
 	}
@@ -403,14 +403,14 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 	/* Set address of NAND IO lines */
 	nand_chip->IO_ADDR_R = host->io_base;
 	nand_chip->IO_ADDR_W = host->io_base;
-	nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
+	nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 
 	if (host->board->rdy_pin)
-		nand_chip->dev_ready = at91_nand_device_ready;
+		nand_chip->dev_ready = atmel_nand_device_ready;
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!regs && hard_ecc) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource "
+		printk(KERN_ERR "atmel_nand: can't get I/O resource "
 				"regs\nFalling back on software ECC\n");
 	}
 
@@ -420,15 +420,15 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 	if (hard_ecc && regs) {
 		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
 		if (host->ecc == NULL) {
-			printk(KERN_ERR "at91_nand: ioremap failed\n");
+			printk(KERN_ERR "atmel_nand: ioremap failed\n");
 			res = -EIO;
 			goto err_ecc_ioremap;
 		}
 		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-		nand_chip->ecc.calculate = at91_nand_calculate;
-		nand_chip->ecc.correct = at91_nand_correct;
-		nand_chip->ecc.hwctl = at91_nand_hwctl;
-		nand_chip->ecc.read_page = at91_nand_read_page;
+		nand_chip->ecc.calculate = atmel_nand_calculate;
+		nand_chip->ecc.correct = atmel_nand_correct;
+		nand_chip->ecc.hwctl = atmel_nand_hwctl;
+		nand_chip->ecc.read_page = atmel_nand_read_page;
 		nand_chip->ecc.bytes = 4;
 		nand_chip->ecc.prepad = 0;
 		nand_chip->ecc.postpad = 0;
@@ -440,7 +440,7 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 		nand_chip->options |= NAND_BUSWIDTH_16;
 
 	platform_set_drvdata(pdev, host);
-	at91_nand_enable(host);
+	atmel_nand_enable(host);
 
 	if (host->board->det_pin) {
 		if (gpio_get_value(host->board->det_pin)) {
@@ -463,22 +463,22 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 		/* set ECC page size and oob layout */
 		switch (mtd->writesize) {
 		case 512:
-			nand_chip->ecc.layout = &at91_oobinfo_small;
-			nand_chip->ecc.read_oob = at91_nand_read_oob_512;
-			nand_chip->ecc.write_oob = at91_nand_write_oob_512;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_528);
+			nand_chip->ecc.layout = &atmel_oobinfo_small;
+			nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
+			nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
 			break;
 		case 1024:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_1056);
+			nand_chip->ecc.layout = &atmel_oobinfo_large;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
 			break;
 		case 2048:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_2112);
+			nand_chip->ecc.layout = &atmel_oobinfo_large;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
 			break;
 		case 4096:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_4224);
+			nand_chip->ecc.layout = &atmel_oobinfo_large;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
 			break;
 		default:
 			/* page size not handled by HW ECC */
@@ -503,7 +503,7 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_MTD_PARTITIONS
 #ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd->name = "at91_nand";
+	mtd->name = "atmel_nand";
 	num_partitions = parse_mtd_partitions(mtd, part_probes,
 					      &partitions, 0);
 #endif
@@ -512,7 +512,7 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 							 &num_partitions);
 
 	if ((!partitions) || (num_partitions == 0)) {
-		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+		printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
 		res = ENXIO;
 		goto release;
 	}
@@ -534,7 +534,7 @@ out:
 	iounmap(host->ecc);
 
 err_ecc_ioremap:
-	at91_nand_disable(host);
+	atmel_nand_disable(host);
 	platform_set_drvdata(pdev, NULL);
 	iounmap(host->io_base);
 	kfree(host);
@@ -544,14 +544,14 @@ err_ecc_ioremap:
 /*
  * Remove a NAND device.
  */
-static int __devexit at91_nand_remove(struct platform_device *pdev)
+static int __devexit atmel_nand_remove(struct platform_device *pdev)
 {
-	struct at91_nand_host *host = platform_get_drvdata(pdev);
+	struct atmel_nand_host *host = platform_get_drvdata(pdev);
 	struct mtd_info *mtd = &host->mtd;
 
 	nand_release(mtd);
 
-	at91_nand_disable(host);
+	atmel_nand_disable(host);
 
 	iounmap(host->io_base);
 	iounmap(host->ecc);
@@ -560,31 +560,31 @@ static int __devexit at91_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver at91_nand_driver = {
-	.probe		= at91_nand_probe,
-	.remove		= at91_nand_remove,
+static struct platform_driver atmel_nand_driver = {
+	.probe		= atmel_nand_probe,
+	.remove		= atmel_nand_remove,
 	.driver		= {
-		.name	= "at91_nand",
+		.name	= "atmel_nand",
 		.owner	= THIS_MODULE,
 	},
 };
 
-static int __init at91_nand_init(void)
+static int __init atmel_nand_init(void)
 {
-	return platform_driver_register(&at91_nand_driver);
+	return platform_driver_register(&atmel_nand_driver);
 }
 
 
-static void __exit at91_nand_exit(void)
+static void __exit atmel_nand_exit(void)
 {
-	platform_driver_unregister(&at91_nand_driver);
+	platform_driver_unregister(&atmel_nand_driver);
 }
 
 
-module_init(at91_nand_init);
-module_exit(at91_nand_exit);
+module_init(atmel_nand_init);
+module_exit(atmel_nand_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Rick Bronson");
 MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
-MODULE_ALIAS("platform:at91_nand");
+MODULE_ALIAS("platform:atmel_nand");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index 170db869aac..1ee7f993db1 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -11,26 +11,26 @@
 #ifndef ATMEL_NAND_ECC_H
 #define ATMEL_NAND_ECC_H
 
-#define AT91_ECC_CR		0x00			/* Control register */
-#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
+#define ATMEL_ECC_CR		0x00			/* Control register */
+#define		ATMEL_ECC_RST		(1 << 0)		/* Reset parity */
 
-#define AT91_ECC_MR		0x04			/* Mode register */
-#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
-#define			AT91_ECC_PAGESIZE_528		(0)
-#define			AT91_ECC_PAGESIZE_1056		(1)
-#define			AT91_ECC_PAGESIZE_2112		(2)
-#define			AT91_ECC_PAGESIZE_4224		(3)
+#define ATMEL_ECC_MR		0x04			/* Mode register */
+#define		ATMEL_ECC_PAGESIZE	(3 << 0)		/* Page Size */
+#define			ATMEL_ECC_PAGESIZE_528		(0)
+#define			ATMEL_ECC_PAGESIZE_1056		(1)
+#define			ATMEL_ECC_PAGESIZE_2112		(2)
+#define			ATMEL_ECC_PAGESIZE_4224		(3)
 
-#define AT91_ECC_SR		0x08			/* Status register */
-#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
-#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
-#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
+#define ATMEL_ECC_SR		0x08			/* Status register */
+#define		ATMEL_ECC_RECERR		(1 << 0)		/* Recoverable Error */
+#define		ATMEL_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
+#define		ATMEL_ECC_MULERR		(1 << 2)		/* Multiple Errors */
 
-#define AT91_ECC_PR		0x0c			/* Parity register */
-#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
-#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
+#define ATMEL_ECC_PR		0x0c			/* Parity register */
+#define		ATMEL_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
+#define		ATMEL_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
 
-#define AT91_ECC_NPR		0x10			/* NParity register */
-#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
+#define ATMEL_ECC_NPR		0x10			/* NParity register */
+#define		ATMEL_ECC_NPARITY	(0xffff << 0)		/* NParity */
 
 #endif
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index dc189f01c5b..6296922a684 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -85,7 +85,7 @@ struct at91_usbh_data {
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
-struct at91_nand_data {
+struct atmel_nand_data {
 	u8		enable_pin;	/* chip enable */
 	u8		det_pin;	/* card detect */
 	u8		rdy_pin;	/* ready/busy */
@@ -94,7 +94,7 @@ struct at91_nand_data {
 	u8		bus_width_16;	/* buswidth is 16 bit */
 	struct mtd_partition* (*partition_info)(int, int*);
 };
-extern void __init at91_add_device_nand(struct at91_nand_data *data);
+extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/
 extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-- 
cgit v1.2.3


From cc0c72e173db70a3a864994b05ebbe59b79b888f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:54 +0200
Subject: [MTD] [NAND] atmel_nand: Clean up and fix probe() error path
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This fixes several bugs in the atmel_nand_probe() error path, including
at least one memory leak.

Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/atmel_nand.c | 41 ++++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 675a82ca77f..325ce29f53f 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -371,6 +371,12 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	int num_partitions = 0;
 #endif
 
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
+		return -ENXIO;
+	}
+
 	/* Allocate memory for the device structure (and zero it) */
 	host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
 	if (!host) {
@@ -378,17 +384,11 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
-		return -ENXIO;
-	}
-
 	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
 	if (host->io_base == NULL) {
 		printk(KERN_ERR "atmel_nand: ioremap failed\n");
-		kfree(host);
-		return -EIO;
+		res = -EIO;
+		goto err_nand_ioremap;
 	}
 
 	mtd = &host->mtd;
@@ -446,14 +446,14 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		if (gpio_get_value(host->board->det_pin)) {
 			printk ("No SmartMedia card inserted.\n");
 			res = ENXIO;
-			goto out;
+			goto err_no_card;
 		}
 	}
 
 	/* first scan to find the device and get the page size */
 	if (nand_scan_ident(mtd, 1)) {
 		res = -ENXIO;
-		goto out;
+		goto err_scan_ident;
 	}
 
 	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
@@ -498,7 +498,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	/* second phase scan */
 	if (nand_scan_tail(mtd)) {
 		res = -ENXIO;
-		goto out;
+		goto err_scan_tail;
 	}
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -514,7 +514,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	if ((!partitions) || (num_partitions == 0)) {
 		printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
 		res = ENXIO;
-		goto release;
+		goto err_no_partitions;
 	}
 
 	res = add_mtd_partitions(mtd, partitions, num_partitions);
@@ -526,17 +526,19 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		return res;
 
 #ifdef CONFIG_MTD_PARTITIONS
-release:
+err_no_partitions:
 #endif
 	nand_release(mtd);
-
-out:
-	iounmap(host->ecc);
-
-err_ecc_ioremap:
+err_scan_tail:
+err_scan_ident:
+err_no_card:
 	atmel_nand_disable(host);
 	platform_set_drvdata(pdev, NULL);
+	if (host->ecc)
+		iounmap(host->ecc);
+err_ecc_ioremap:
 	iounmap(host->io_base);
+err_nand_ioremap:
 	kfree(host);
 	return res;
 }
@@ -553,8 +555,9 @@ static int __devexit atmel_nand_remove(struct platform_device *pdev)
 
 	atmel_nand_disable(host);
 
+	if (host->ecc)
+		iounmap(host->ecc);
 	iounmap(host->io_base);
-	iounmap(host->ecc);
 	kfree(host);
 
 	return 0;
-- 
cgit v1.2.3


From e1677ce4e41a7c1bbc35a0dee27d5c7e7d223a4b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:55 +0200
Subject: avr32: move hsmc_init() to core_initcall
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The board init code, typically running from postcore_initcall, may
need to set up SMC timings. We have to make sure the SMC driver is
ready before this happens.

Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 arch/avr32/mach-at32ap/hsmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index fa427ed4278..b2d9bc61a35 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
 {
 	return platform_driver_register(&hsmc_driver);
 }
-arch_initcall(hsmc_init);
+core_initcall(hsmc_init);
-- 
cgit v1.2.3


From 62090a08aba579e6c69319fac4d4a1f806f26400 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:56 +0200
Subject: [MTD] [NAND] avr32: atmel_nand platform code for AT32AP700x
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This function initializes and adds a platform_device for a NAND flash
interface on SMC chip select 3.

Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 arch/avr32/mach-at32ap/at32ap700x.c   | 52 +++++++++++++++++++++++++++++++++++
 include/asm-avr32/arch-at32ap/board.h | 13 +++++++++
 2 files changed, 65 insertions(+)

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 0f24b4f85c1..b65d3e0667a 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1729,6 +1729,58 @@ fail:
 }
 #endif
 
+/* --------------------------------------------------------------------
+ * NAND Flash / SmartMedia
+ * -------------------------------------------------------------------- */
+static struct resource smc_cs3_resource[] __initdata = {
+	{
+		.start	= 0x0c000000,
+		.end	= 0x0fffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xfff03c00,
+		.end	= 0xfff03fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device *__init
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
+	struct platform_device *pdev;
+
+	if (id != 0 || !data)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_nand", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_resources(pdev, smc_cs3_resource,
+				ARRAY_SIZE(smc_cs3_resource)))
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct atmel_nand_data)))
+		goto fail;
+
+	set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
+	if (data->enable_pin)
+		at32_select_gpio(data->enable_pin,
+				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	if (data->rdy_pin)
+		at32_select_gpio(data->rdy_pin, 0);
+	if (data->det_pin)
+		at32_select_gpio(data->det_pin, 0);
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
 /* --------------------------------------------------------------------
  * AC97C
  * -------------------------------------------------------------------- */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index a4e2d28bfb5..cc5906cd741 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -85,4 +85,17 @@ struct platform_device *
 at32_add_device_cf(unsigned int id, unsigned int extint,
 		struct cf_platform_data *data);
 
+/* NAND / SmartMedia */
+struct atmel_nand_data {
+	int	enable_pin;	/* chip enable */
+	int	det_pin;	/* card detect */
+	int	rdy_pin;	/* ready/busy */
+	u8	ale;		/* address line number connected to ALE */
+	u8	cle;		/* address line number connected to CLE */
+	u8	bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+};
+struct platform_device *
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
+
 #endif /* __ASM_ARCH_BOARD_H */
-- 
cgit v1.2.3


From 984290ded4ee3834ca913fe361afe3bf625cd9c0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:57 +0200
Subject: [MTD] [NAND] atmel_nand: make available on AVR32
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Make the atmel_nand driver selectable on AVR32, and update the Kconfig
help text to reflect this.

Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/Kconfig | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index cdd2952c153..d8c0d8698b4 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -272,18 +272,18 @@ config MTD_NAND_CS553X
 	  If you say "m", the module will be called "cs553x_nand.ko".
 
 config MTD_NAND_ATMEL
-	bool "Support for NAND Flash / SmartMedia on AT91"
-	depends on ARCH_AT91
+	bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
+	depends on ARCH_AT91 || AVR32
 	help
 	  Enables support for NAND Flash / Smart Media Card interface
-	  on Atmel AT91 processors.
+	  on Atmel AT91 and AVR32 processors.
 choice
-	prompt "ECC management for NAND Flash / SmartMedia on AT91"
+	prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
 	depends on MTD_NAND_ATMEL
 
 config MTD_NAND_ATMEL_ECC_HW
 	bool "Hardware ECC"
-	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260
+	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
 	help
 	  Use hardware ECC instead of software ECC when the chip
 	  supports it.
-- 
cgit v1.2.3


From e150d6e725c014d72106a8610be40b7b08beb77a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:58 +0200
Subject: avr32: Add support for ATSTK1006
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The ATSTK1006 is basically an upgraded version of ATSTK1002 with
128 MiB SDRAM and 256 MiB NAND flash on board.

Otherwise, the board is very similar to the ATSTK1002, so it uses the
same board support file.

Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 arch/avr32/boards/atstk1000/Kconfig     |  4 ++
 arch/avr32/boards/atstk1000/Makefile    |  1 +
 arch/avr32/boards/atstk1000/atstk1002.c | 78 ++++++++++++++++++++++++++++++++-
 3 files changed, 81 insertions(+), 2 deletions(-)

diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index af90b00100f..8dc48214f0b 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
 	bool "ATSTK1004"
 	select CPU_AT32AP7002
 
+config BOARD_ATSTK1006
+	bool "ATSTK1006"
+	select CPU_AT32AP7000
+
 endchoice
 
 
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
index beead86462e..edecee03742 100644
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -2,3 +2,4 @@ obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
 obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
 obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
+obj-$(CONFIG_BOARD_ATSTK1006)	+= atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 000eb4220a1..5bfaf4d87b3 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -1,7 +1,7 @@
 /*
- * ATSTK1002 daughterboard-specific init code
+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
  *
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2007 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -29,6 +29,74 @@
 #include "atstk1000.h"
 
 
+/*
+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
+ * have the AT32AP7000 chip on board; the difference is that the
+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
+ * none.)
+ *
+ * The RAM difference is handled by the boot loader, so the only
+ * difference we end up handling here is the NAND flash.
+ */
+#ifdef CONFIG_BOARD_ATSTK1006
+#include <linux/mtd/partitions.h>
+#include <asm/arch/smc.h>
+
+static struct smc_timing nand_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 10,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 30,
+	.nrd_pulse		= 15,
+	.ncs_write_pulse	= 30,
+	.nwe_pulse		= 15,
+
+	.read_cycle		= 30,
+	.write_cycle		= 30,
+
+	.ncs_read_recover	= 0,
+	.nrd_recover		= 15,
+	.ncs_write_recover	= 0,
+	/* WE# high -> RE# low min 60 ns */
+	.nwe_recover		= 50,
+};
+
+static struct smc_config nand_config __initdata = {
+	.bus_width		= 1,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.nwait_mode		= 0,
+	.byte_write		= 0,
+	.tdf_cycles		= 2,
+	.tdf_mode		= 0,
+};
+
+static struct mtd_partition nand_partitions[] = {
+	{
+		.name		= "main",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(nand_partitions);
+	return nand_partitions;
+}
+
+struct atmel_nand_data atstk1006_nand_data __initdata = {
+	.cle		= 21,
+	.ale		= 22,
+	.rdy_pin	= GPIO_PIN_PB(30),
+	.enable_pin	= GPIO_PIN_PB(29),
+	.partition_info	= nand_part_info,
+};
+#endif
+
 struct eth_addr {
 	u8 addr[6];
 };
@@ -212,6 +280,12 @@ static int __init atstk1002_init(void)
 
 	at32_add_system_devices();
 
+#ifdef CONFIG_BOARD_ATSTK1006
+	smc_set_timing(&nand_config, &nand_timing);
+	smc_set_configuration(3, &nand_config);
+	at32_add_device_nand(0, &atstk1006_nand_data);
+#endif
+
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
-- 
cgit v1.2.3


From 90574d0a4d4b73308ae54a2a57a4f3f1fa98e984 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Sat, 7 Jun 2008 08:49:00 +0100
Subject: [MTD] [NAND] Fix checkpatch warnings which showed up when
 atmel_nand.c moved

Some of them, at least.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/atmel_nand.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 325ce29f53f..50700ab5a57 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -29,8 +29,8 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/gpio.h>
-#include <asm/io.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
 
 #include <asm/arch/board.h>
 
@@ -444,7 +444,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	if (host->board->det_pin) {
 		if (gpio_get_value(host->board->det_pin)) {
-			printk ("No SmartMedia card inserted.\n");
+			printk("No SmartMedia card inserted.\n");
 			res = ENXIO;
 			goto err_no_card;
 		}
-- 
cgit v1.2.3


From 688c91755dc3d3c03d8c67c1df13c02be258768e Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Mon, 16 Jun 2008 15:51:08 -0700
Subject: softlockup: print a module list on being stuck

Most places in the kernel that go BUG: print a module list
(which is very useful for doing statistics and finding patterns),
however the softlockup detector does not do this yet.

This patch adds the one line change to fix this gap.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/softlockup.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 6b682d86bdd..f2bf5decb10 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -143,6 +143,7 @@ void softlockup_tick(void)
 	printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %lus! [%s:%d]\n",
 			this_cpu, now - touch_timestamp,
 			current->comm, task_pid_nr(current));
+	print_modules();
 	if (regs)
 		show_regs(regs);
 	else
-- 
cgit v1.2.3


From fc68911ee379bff429c2f8dfc0a4d3277eb193ec Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Wed, 25 Jun 2008 11:41:42 +0800
Subject: Blackfin arch: use the generic platform nand driver to support nand
 flash on bf53x board which do not have on-chip nand flash controller

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 86 +++++++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 671f9d67f23..7e4b9d95674 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -29,9 +29,12 @@
  */
 
 #include <linux/device.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -355,6 +358,84 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+	{
+		.name   = "linux kernel",
+		.size   = 0x400000,
+		.offset = 0,
+	}, {
+		.name   = "file system",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+#endif
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 1
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+	else
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF3
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+	.chip = {
+		.chip_delay = 30,
+#ifdef CONFIG_MTD_PARTITIONS
+		.part_probe_types = part_probes,
+		.partitions = bfin_plat_nand_partitions,
+		.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+#endif
+	},
+	.ctrl = {
+		.cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
+		.dev_ready = bfin_plat_nand_dev_ready,
+	},
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+	.start = 0x20212000,
+	.end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+	.flags = IORESOURCE_IO,
+};
+
+static struct platform_device bfin_async_nand_device = {
+	.name = "gen_nand",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_plat_nand_resources,
+	.dev = {
+		.platform_data = &bfin_plat_nand_data,
+	},
+};
+
+static void bfin_plat_nand_init(void)
+{
+	gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+}
+#else
+static void bfin_plat_nand_init(void) {}
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
@@ -922,6 +1003,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_gpios_device,
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+	&bfin_async_nand_device,
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&stamp_flash_device,
 #endif
@@ -936,6 +1021,7 @@ static int __init stamp_init(void)
 				ARRAY_SIZE(bfin_i2c_board_info));
 #endif
 
+	bfin_plat_nand_init();
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
-- 
cgit v1.2.3


From 8d5be7f4e8515af461cbc8f07687ccc81507d508 Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Wed, 25 Jun 2008 08:50:10 +0200
Subject: softlockup: show irqtrace

This patch adds some information about when interrupts were last
enabled and disabled to the output of the softlockup detector.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/softlockup.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index f2bf5decb10..97977ecc317 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -13,6 +13,7 @@
 #include <linux/delay.h>
 #include <linux/freezer.h>
 #include <linux/kthread.h>
+#include <linux/lockdep.h>
 #include <linux/notifier.h>
 #include <linux/module.h>
 
@@ -144,6 +145,7 @@ void softlockup_tick(void)
 			this_cpu, now - touch_timestamp,
 			current->comm, task_pid_nr(current));
 	print_modules();
+	print_irqtrace_events(current);
 	if (regs)
 		show_regs(regs);
 	else
-- 
cgit v1.2.3


From dd7a1e5615b1719c0fdffee1ea5a7820ac8141a6 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 27 Jun 2008 15:07:21 +0200
Subject: softlockup: fix watchdog task wakeup frequency

Updating the timestamp more often is pointless as we print the warnings
only if we exceed the threshold.  And the check for hung tasks relies on
the last timestamp, so it will keep working correctly, too.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/softlockup.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 97977ecc317..d53ab702a7d 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -130,8 +130,11 @@ void softlockup_tick(void)
 
 	now = get_timestamp(this_cpu);
 
-	/* Wake up the high-prio watchdog task every second: */
-	if (now > (touch_timestamp + 1))
+	/*
+	 * Wake up the high-prio watchdog task twice per
+	 * threshold timespan.
+	 */
+	if (now > touch_timestamp + softlockup_thresh/2)
 		wake_up_process(per_cpu(watchdog_task, this_cpu));
 
 	/* Warn about unreasonable delays: */
-- 
cgit v1.2.3


From 3e2f69fdd1b00166e7d589bce56b2d36a9e74374 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Tue, 1 Jul 2008 09:12:04 +0200
Subject: softlockup: fix watchdog task wakeup frequency

The print_timestamp can never be bigger than the touch_timestamp, at
maximum it can be equal.  And if it is, the second check for
touch_timestamp + 1 bigger print_timestamp is always true, too.

The check for equality is sufficient as we proceed in one-second-steps
and are at least one second away from the last print-out if we have
another timestamp.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/softlockup.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index d53ab702a7d..7bd8d1aadd5 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -116,11 +116,8 @@ void softlockup_tick(void)
 	print_timestamp = per_cpu(print_timestamp, this_cpu);
 
 	/* report at most once a second */
-	if ((print_timestamp >= touch_timestamp &&
-			print_timestamp < (touch_timestamp + 1)) ||
-			did_panic) {
+	if (print_timestamp == touch_timestamp || did_panic)
 		return;
-	}
 
 	/* do not print during early bootup: */
 	if (unlikely(system_state != SYSTEM_RUNNING)) {
-- 
cgit v1.2.3


From 9982fbface82893e77d211fbabfbd229da6bdde6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 6 Jul 2008 14:24:08 +0200
Subject: Revert "cpumask: introduce new APIs"

This reverts commit acb7669c125676e63cf96582455509216c39745e.

the wrappers are not needed anymore.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/cpumask.h | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 47418b1b410..80226e77614 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -394,10 +394,6 @@ int __next_cpu_nr(int n, const cpumask_t *srcp);
 
 #endif /* NR_CPUS > 64 */
 
-#define next_cpu_nr(n, src)		next_cpu(n, src)
-#define cpus_weight_nr(cpumask)		cpus_weight(cpumask)
-#define for_each_cpu_mask_nr(cpu, mask)	for_each_cpu_mask(cpu, mask)
-
 /*
  * The following particular system cpumasks and operations manage
  * possible, present and online cpus.  Each of them is a fixed size
-- 
cgit v1.2.3


From 75f10b465af9efd59906e9079ed9cbda7e0f7a43 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Thu, 22 May 2008 16:20:18 +0100
Subject: [ARM] 5047/2: Support resetting by asserting GPIO pin

This adds support for resetting via assertion of GPIO pin.
This e.g. is used on Sharp Zaurus SL-6000.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Makefile          |  2 +-
 arch/arm/mach-pxa/reset.c           | 95 +++++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-pxa/hardware.h |  5 ++
 include/asm-arm/arch-pxa/system.h   | 17 +------
 4 files changed, 102 insertions(+), 17 deletions(-)
 create mode 100644 arch/arm/mach-pxa/reset.c

diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0e6d05bb81a..c9e66fbe622 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
-				   time.o gpio.o
+				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
 
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 00000000000..551f313c94d
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,95 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/io.h>
+#include <asm/proc-fns.h>
+
+#include <asm/arch/pxa-regs.h>
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio)
+{
+	int rc;
+
+	rc = gpio_request(gpio, "reset generator");
+	if (rc) {
+		printk(KERN_ERR "Can't request reset_gpio\n");
+		goto out;
+	}
+
+	rc = gpio_direction_input(gpio);
+	if (rc) {
+		printk(KERN_ERR "Can't configure reset_gpio for input\n");
+		gpio_free(gpio);
+		goto out;
+	}
+
+out:
+	if (!rc)
+		reset_gpio = gpio;
+
+	return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+	BUG_ON(reset_gpio == -1);
+
+	/* drive it low */
+	gpio_direction_output(reset_gpio, 0);
+	mdelay(2);
+	/* rising edge or drive high */
+	gpio_set_value(reset_gpio, 1);
+	mdelay(2);
+	/* falling edge */
+	gpio_set_value(reset_gpio, 0);
+
+	/* give it some time */
+	mdelay(10);
+
+	WARN_ON(1);
+	/* fallback */
+	do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+	/* Initialize the watchdog and let it fire */
+	OWER = OWER_WME;
+	OSSR = OSSR_M3;
+	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+	if (cpu_is_pxa2xx())
+		RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+	switch (mode) {
+	case 's':
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+		break;
+	case 'h':
+		do_hw_reset();
+		break;
+	case 'g':
+		do_gpio_reset();
+		break;
+	}
+}
+
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index e25558faa5a..5547ec797ad 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -205,6 +205,11 @@ static inline void __deprecated pxa_set_cken(int clock, int enable)
  */
 extern unsigned int get_memclk_frequency_10khz(void);
 
+/*
+ * register GPIO as reset generator
+ */
+extern int init_gpio_reset(int gpio);
+
 #endif
 
 #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
index 9aa6c2e939e..14894ae3fa6 100644
--- a/include/asm-arm/arch-pxa/system.h
+++ b/include/asm-arm/arch-pxa/system.h
@@ -20,19 +20,4 @@ static inline void arch_idle(void)
 }
 
 
-static inline void arch_reset(char mode)
-{
-	if (cpu_is_pxa2xx())
-		RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Initialize the watchdog and let it fire */
-		OWER = OWER_WME;
-		OSSR = OSSR_M3;
-		OSMR3 = OSCR + 368640;	/* ... in 100 ms */
-	}
-}
-
+void arch_reset(char mode);
-- 
cgit v1.2.3


From 4d1fe075e5a84aaae00614cb23096336fda6374f Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Thu, 29 May 2008 21:18:07 +0100
Subject: [ARM] 5069/1: pxa: include pxa2xx-regs.h in reset.c for RSCR

The RCSR definition was moved into pxa2xx-regs.h.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/reset.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 551f313c94d..9d39dea57ce 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -11,6 +11,7 @@
 #include <asm/proc-fns.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 
 static void do_hw_reset(void);
 
-- 
cgit v1.2.3


From 86159a98adbb33682a4658c9b1eae95d9c9e25ed Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Thu, 22 May 2008 16:21:48 +0100
Subject: [ARM] 5048/2: Clean up tosa and spitz resetting

Use new reset_gpio to reset tosa and spitz PDAs.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/spitz.c | 7 ++-----
 arch/arm/mach-pxa/tosa.c  | 9 ++++-----
 2 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dace3820f1e..d58c3e906a9 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -530,11 +530,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-	pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
-	GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void spitz_restart(char mode)
@@ -548,6 +544,7 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
+	init_gpio_reset(SPITZ_GPIO_ON_RESET);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c2cbd66db81..9ae2271f93c 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -24,6 +24,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/reboot.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -467,11 +468,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void tosa_poweroff(void)
 {
-	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
-	GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void tosa_restart(char mode)
@@ -489,6 +486,8 @@ static void __init tosa_init(void)
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
+	init_gpio_reset(TOSA_GPIO_ON_RESET);
+
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
 
-- 
cgit v1.2.3


From c867155cde9905dfbcb16fcadb1840b06f8869d4 Mon Sep 17 00:00:00 2001
From: eric miao <eric.y.miao@gmail.com>
Date: Mon, 26 May 2008 03:28:50 +0100
Subject: [ARM] 5064/1: pxa: explicitly specify tosa keyboard GPIOs' low power
 states to DRIVE_LOW

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c         | 36 ++++++++++++++++++------------------
 drivers/input/keyboard/tosakbd.c |  2 --
 2 files changed, 18 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 9ae2271f93c..8bf947dcb2e 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -130,24 +130,24 @@ static unsigned long tosa_pin_config[] = {
 	GPIO47_STUART_TXD,
 
 	/* Keybd */
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
+	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
 
 	/* SPI */
 	GPIO81_SSP2_CLK_OUT,
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
index 94e444b4ee1..b12b7ee4b6a 100644
--- a/drivers/input/keyboard/tosakbd.c
+++ b/drivers/input/keyboard/tosakbd.c
@@ -215,8 +215,6 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
 	unsigned long flags;
 
 	spin_lock_irqsave(&tosakbd->lock, flags);
-	PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT);
-	PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT);
 	tosakbd->suspended = 1;
 	spin_unlock_irqrestore(&tosakbd->lock, flags);
 
-- 
cgit v1.2.3


From c4d5f8d43a5423a6bbba4eec1fab9c46e8d53c5d Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Mon, 9 Jun 2008 13:23:50 +0100
Subject: [ARM] 5081/1: tosa: fix SD GPIOs

This changes SD-related GPIO names to be more informative,
and allocates two more SD-related GPIOs.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c | 32 +++++++++++++++++++++++++++++---
 1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 8bf947dcb2e..ba95cd66b98 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -87,7 +87,7 @@ static unsigned long tosa_pin_config[] = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 	GPIO9_GPIO, /* Detect */
-	// GPIO10 nSD_INT
+	GPIO10_GPIO, /* nSD_INT */
 
 	/* CF */
 	GPIO13_GPIO, /* CD_IRQ */
@@ -250,6 +250,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
 	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
+	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+		goto err_gpio_detect;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+	if (err)
+		goto err_gpio_detect_dir;
+
 	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"MMC/SD card detect", data);
@@ -258,7 +267,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 		goto err_irq;
 	}
 
-	err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
 		goto err_gpio_wp;
@@ -267,7 +276,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_wp_dir;
 
-	err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
 		goto err_gpio_pwr;
@@ -276,8 +285,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_pwr_dir;
 
+	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+		goto err_gpio_int;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+	if (err)
+		goto err_gpio_int_dir;
+
 	return 0;
 
+err_gpio_int_dir:
+	gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
 err_gpio_pwr_dir:
 	gpio_free(TOSA_GPIO_PWR_ON);
 err_gpio_pwr:
@@ -286,6 +307,9 @@ err_gpio_wp_dir:
 err_gpio_wp:
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 err_irq:
+err_gpio_detect_dir:
+	gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
 	return err;
 }
 
@@ -307,9 +331,11 @@ static int tosa_mci_get_ro(struct device *dev)
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+	gpio_free(TOSA_GPIO_nSD_INT);
 	gpio_free(TOSA_GPIO_PWR_ON);
 	gpio_free(TOSA_GPIO_SD_WP);
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
-- 
cgit v1.2.3


From debba222b20c7e98d7875d9c70552b3094038ab2 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 11 Jun 2008 13:27:24 +0100
Subject: [ARM] 5089/1: tosa: cleanup includes

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ba95cd66b98..9892464d7ab 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -24,15 +24,9 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
-#include <linux/reboot.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/irda.h>
@@ -41,8 +35,6 @@
 #include <asm/arch/udc.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/arch/tosa.h>
 
 #include <asm/hardware/scoop.h>
-- 
cgit v1.2.3


From b032fccca80cbbedaa80e5a72a202a43f08aa97e Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Thu, 12 Jun 2008 11:42:07 +0100
Subject: [ARM] 5083/2: Tosa: fix IrDA transciver powerup.

On tosa the tranciver LED isn't powered down if
the GPIO47 (STUART_TX) isn't configured as low-level.
Power it down if IrDA is off to save a bit of power.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c        | 58 ++++++++++++++++++++++++++++++++---------
 include/asm-arm/arch-pxa/tosa.h |  1 +
 2 files changed, 47 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 9892464d7ab..7a89f764acf 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -117,10 +117,6 @@ static unsigned long tosa_pin_config[] = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* IrDA */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
 	/* Keybd */
 	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
 	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
@@ -147,6 +143,17 @@ static unsigned long tosa_pin_config[] = {
 	GPIO83_SSP2_TXD,
 };
 
+static unsigned long tosa_pin_irda_off[] = {
+	GPIO46_STUART_RXD,
+	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
+};
+
+static unsigned long tosa_pin_irda_on[] = {
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+};
+
+
 /*
  * SCOOP Device
  */
@@ -341,29 +348,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
+		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	} else {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_on));
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+	}
+}
+
 static int tosa_irda_startup(struct device *dev)
 {
 	int ret;
 
+	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+	if (ret)
+		goto err_tx;
+	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	if (ret)
+		goto err_tx_dir;
+
 	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
 	if (ret)
-		return ret;
+		goto err_pwr;
 
 	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
 	if (ret)
-		gpio_free(TOSA_GPIO_IR_POWERDWN);
+		goto err_pwr_dir;
 
-	return ret;
-	}
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
 
-static void tosa_irda_shutdown(struct device *dev)
-{
+	return 0;
+
+err_pwr_dir:
 	gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+	gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+	return ret;
 }
 
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
 {
-	gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+	gpio_free(TOSA_GPIO_IR_POWERDWN);
+	gpio_free(TOSA_GPIO_IRDA_TX);
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -501,6 +534,7 @@ static void tosa_restart(char mode)
 static void __init tosa_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
index c5b6fde6907..18822621615 100644
--- a/include/asm-arm/arch-pxa/tosa.h
+++ b/include/asm-arm/arch-pxa/tosa.h
@@ -99,6 +99,7 @@
 #define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
 #define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
 #define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
+#define TOSA_GPIO_IRDA_TX		(47)
 #define TOSA_GPIO_TG_SPI_SCLK		(81)
 #define TOSA_GPIO_TG_SPI_CS		(82)
 #define TOSA_GPIO_TG_SPI_MOSI		(83)
-- 
cgit v1.2.3


From d6315949ac5527efd00d48283a9e33361c86e8e9 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Sun, 22 Jun 2008 12:01:58 +0100
Subject: [ARM] 5096/2: Support Toshiba TC6393XB Mobile I/O Controller.

Add support for Toshiba TC6393XB companion chip. Currently
only GPIO and part of IRQ features of the device are supported.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/mfd/Kconfig          |   6 +
 drivers/mfd/Makefile         |   2 +
 drivers/mfd/tc6393xb.c       | 537 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/tc6393xb.h |  47 ++++
 4 files changed, 592 insertions(+)
 create mode 100644 drivers/mfd/tc6393xb.c
 create mode 100644 include/linux/mfd/tc6393xb.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2566479937c..1a1ac262fc8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -38,6 +38,12 @@ config HTC_PASIC3
 	  HTC Magician devices, respectively. Actual functionality is
 	  handled by the leds-pasic3 and ds1wm drivers.
 
+config MFD_TC6393XB
+	bool "Support Toshiba TC6393XB"
+	depends on HAVE_GPIO_LIB
+	help
+	  Support for Toshiba Mobile IO Controller TC6393XB
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index eef4e26807d..b4168442d53 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,6 +8,8 @@ obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 
+obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
+
 obj-$(CONFIG_MCP)		+= mcp-core.o
 obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
new file mode 100644
index 00000000000..4d7192edefe
--- /dev/null
+++ b/drivers/mfd/tc6393xb.c
@@ -0,0 +1,537 @@
+/*
+ * Toshiba TC6393XB SoC support
+ *
+ * Copyright(c) 2005-2006 Chris Humbert
+ * Copyright(c) 2005 Dirk Opfer
+ * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
+ * Copyright(c) 2007 Dmitry Baryshkov
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ * Based on locomo.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/clk.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/gpio.h>
+
+#define SCR_REVID	0x08		/* b Revision ID	*/
+#define SCR_ISR		0x50		/* b Interrupt Status	*/
+#define SCR_IMR		0x52		/* b Interrupt Mask	*/
+#define SCR_IRR		0x54		/* b Interrupt Routing	*/
+#define SCR_GPER	0x60		/* w GP Enable		*/
+#define SCR_GPI_SR(i)	(0x64 + (i))	/* b3 GPI Status	*/
+#define SCR_GPI_IMR(i)	(0x68 + (i))	/* b3 GPI INT Mask	*/
+#define SCR_GPI_EDER(i)	(0x6c + (i))	/* b3 GPI Edge Detect Enable */
+#define SCR_GPI_LIR(i)	(0x70 + (i))	/* b3 GPI Level Invert	*/
+#define SCR_GPO_DSR(i)	(0x78 + (i))	/* b3 GPO Data Set	*/
+#define SCR_GPO_DOECR(i) (0x7c + (i))	/* b3 GPO Data OE Control */
+#define SCR_GP_IARCR(i)	(0x80 + (i))	/* b3 GP Internal Active Register Control */
+#define SCR_GP_IARLCR(i) (0x84 + (i))	/* b3 GP INTERNAL Active Register Level Control */
+#define SCR_GPI_BCR(i)	(0x88 + (i))	/* b3 GPI Buffer Control */
+#define SCR_GPA_IARCR	0x8c		/* w GPa Internal Active Register Control */
+#define SCR_GPA_IARLCR	0x90		/* w GPa Internal Active Register Level Control */
+#define SCR_GPA_BCR	0x94		/* w GPa Buffer Control */
+#define SCR_CCR		0x98		/* w Clock Control	*/
+#define SCR_PLL2CR	0x9a		/* w PLL2 Control	*/
+#define SCR_PLL1CR	0x9c		/* l PLL1 Control	*/
+#define SCR_DIARCR	0xa0		/* b Device Internal Active Register Control */
+#define SCR_DBOCR	0xa1		/* b Device Buffer Off Control */
+#define SCR_FER		0xe0		/* b Function Enable	*/
+#define SCR_MCR		0xe4		/* w Mode Control	*/
+#define SCR_CONFIG	0xfc		/* b Configuration Control */
+#define SCR_DEBUG	0xff		/* b Debug		*/
+
+#define SCR_CCR_CK32K	BIT(0)
+#define SCR_CCR_USBCK	BIT(1)
+#define SCR_CCR_UNK1	BIT(4)
+#define SCR_CCR_MCLK_MASK	(7 << 8)
+#define SCR_CCR_MCLK_OFF	(0 << 8)
+#define SCR_CCR_MCLK_12	(1 << 8)
+#define SCR_CCR_MCLK_24	(2 << 8)
+#define SCR_CCR_MCLK_48	(3 << 8)
+#define SCR_CCR_HCLK_MASK	(3 << 12)
+#define SCR_CCR_HCLK_24	(0 << 12)
+#define SCR_CCR_HCLK_48	(1 << 12)
+
+#define SCR_FER_USBEN		BIT(0)	/* USB host enable */
+#define SCR_FER_LCDCVEN		BIT(1)	/* polysilicon TFT enable */
+#define SCR_FER_SLCDEN		BIT(2)	/* SLCD enable */
+
+#define SCR_MCR_RDY_MASK		(3 << 0)
+#define SCR_MCR_RDY_OPENDRAIN	(0 << 0)
+#define SCR_MCR_RDY_TRISTATE	(1 << 0)
+#define SCR_MCR_RDY_PUSHPULL	(2 << 0)
+#define SCR_MCR_RDY_UNK		BIT(2)
+#define SCR_MCR_RDY_EN		BIT(3)
+#define SCR_MCR_INT_MASK		(3 << 4)
+#define SCR_MCR_INT_OPENDRAIN	(0 << 4)
+#define SCR_MCR_INT_TRISTATE	(1 << 4)
+#define SCR_MCR_INT_PUSHPULL	(2 << 4)
+#define SCR_MCR_INT_UNK		BIT(6)
+#define SCR_MCR_INT_EN		BIT(7)
+/* bits 8 - 16 are unknown */
+
+#define TC_GPIO_BIT(i)		(1 << (i & 0x7))
+
+/*--------------------------------------------------------------------------*/
+
+struct tc6393xb {
+	void __iomem		*scr;
+
+	struct gpio_chip	gpio;
+
+	struct clk		*clk; /* 3,6 Mhz */
+
+	spinlock_t		lock; /* protects RMW cycles */
+
+	struct {
+		u8		fer;
+		u16		ccr;
+		u8		gpi_bcr[3];
+		u8		gpo_dsr[3];
+		u8		gpo_doecr[3];
+	} suspend_state;
+
+	struct resource		rscr;
+	struct resource		*iomem;
+	int			irq;
+	int			irq_base;
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int tc6393xb_gpio_get(struct gpio_chip *chip,
+		unsigned offset)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+
+	/* XXX: does dsr also represent inputs? */
+	return ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
+		& TC_GPIO_BIT(offset);
+}
+
+static void __tc6393xb_gpio_set(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+	u8  dsr;
+
+	dsr = ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+	if (value)
+		dsr |= TC_GPIO_BIT(offset);
+	else
+		dsr &= ~TC_GPIO_BIT(offset);
+
+	iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+}
+
+static void tc6393xb_gpio_set(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+
+	__tc6393xb_gpio_set(chip, offset, value);
+
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+}
+
+static int tc6393xb_gpio_direction_input(struct gpio_chip *chip,
+			unsigned offset)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+	unsigned long flags;
+	u8 doecr;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+
+	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr &= ~TC_GPIO_BIT(offset);
+	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+
+	return 0;
+}
+
+static int tc6393xb_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+	unsigned long flags;
+	u8 doecr;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+
+	__tc6393xb_gpio_set(chip, offset, value);
+
+	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr |= TC_GPIO_BIT(offset);
+	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+
+	return 0;
+}
+
+static int tc6393xb_register_gpio(struct tc6393xb *tc6393xb, int gpio_base)
+{
+	tc6393xb->gpio.label = "tc6393xb";
+	tc6393xb->gpio.base = gpio_base;
+	tc6393xb->gpio.ngpio = 16;
+	tc6393xb->gpio.set = tc6393xb_gpio_set;
+	tc6393xb->gpio.get = tc6393xb_gpio_get;
+	tc6393xb->gpio.direction_input = tc6393xb_gpio_direction_input;
+	tc6393xb->gpio.direction_output = tc6393xb_gpio_direction_output;
+
+	return gpiochip_add(&tc6393xb->gpio);
+}
+
+/*--------------------------------------------------------------------------*/
+
+static void
+tc6393xb_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct tc6393xb *tc6393xb = get_irq_data(irq);
+	unsigned int isr;
+	unsigned int i, irq_base;
+
+	irq_base = tc6393xb->irq_base;
+
+	while ((isr = ioread8(tc6393xb->scr + SCR_ISR) &
+				~ioread8(tc6393xb->scr + SCR_IMR)))
+		for (i = 0; i < TC6393XB_NR_IRQS; i++) {
+			if (isr & (1 << i))
+				generic_handle_irq(irq_base + i);
+		}
+}
+
+static void tc6393xb_irq_ack(unsigned int irq)
+{
+}
+
+static void tc6393xb_irq_mask(unsigned int irq)
+{
+	struct tc6393xb *tc6393xb = get_irq_chip_data(irq);
+	unsigned long flags;
+	u8 imr;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr |= 1 << (irq - tc6393xb->irq_base);
+	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+}
+
+static void tc6393xb_irq_unmask(unsigned int irq)
+{
+	struct tc6393xb *tc6393xb = get_irq_chip_data(irq);
+	unsigned long flags;
+	u8 imr;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr &= ~(1 << (irq - tc6393xb->irq_base));
+	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+}
+
+static struct irq_chip tc6393xb_chip = {
+	.name	= "tc6393xb",
+	.ack	= tc6393xb_irq_ack,
+	.mask	= tc6393xb_irq_mask,
+	.unmask	= tc6393xb_irq_unmask,
+};
+
+static void tc6393xb_attach_irq(struct platform_device *dev)
+{
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	irq_base = tc6393xb->irq_base;
+
+	for (irq = irq_base; irq < irq_base + TC6393XB_NR_IRQS; irq++) {
+		set_irq_chip(irq, &tc6393xb_chip);
+		set_irq_chip_data(irq, tc6393xb);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_type(tc6393xb->irq, IRQT_FALLING);
+	set_irq_data(tc6393xb->irq, tc6393xb);
+	set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq);
+}
+
+static void tc6393xb_detach_irq(struct platform_device *dev)
+{
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	set_irq_chained_handler(tc6393xb->irq, NULL);
+	set_irq_data(tc6393xb->irq, NULL);
+
+	irq_base = tc6393xb->irq_base;
+
+	for (irq = irq_base; irq < irq_base + TC6393XB_NR_IRQS; irq++) {
+		set_irq_flags(irq, 0);
+		set_irq_chip(irq, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+/*--------------------------------------------------------------------------*/
+
+static int tc6393xb_hw_init(struct platform_device *dev)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	int i;
+
+	iowrite8(tc6393xb->suspend_state.fer,	tc6393xb->scr + SCR_FER);
+	iowrite16(tcpd->scr_pll2cr,		tc6393xb->scr + SCR_PLL2CR);
+	iowrite16(tc6393xb->suspend_state.ccr,	tc6393xb->scr + SCR_CCR);
+	iowrite16(SCR_MCR_RDY_OPENDRAIN | SCR_MCR_RDY_UNK | SCR_MCR_RDY_EN |
+		  SCR_MCR_INT_OPENDRAIN | SCR_MCR_INT_UNK | SCR_MCR_INT_EN |
+		  BIT(15),			tc6393xb->scr + SCR_MCR);
+	iowrite16(tcpd->scr_gper,		tc6393xb->scr + SCR_GPER);
+	iowrite8(0,				tc6393xb->scr + SCR_IRR);
+	iowrite8(0xbf,				tc6393xb->scr + SCR_IMR);
+
+	for (i = 0; i < 3; i++) {
+		iowrite8(tc6393xb->suspend_state.gpo_dsr[i],
+					tc6393xb->scr + SCR_GPO_DSR(i));
+		iowrite8(tc6393xb->suspend_state.gpo_doecr[i],
+					tc6393xb->scr + SCR_GPO_DOECR(i));
+		iowrite8(tc6393xb->suspend_state.gpi_bcr[i],
+					tc6393xb->scr + SCR_GPI_BCR(i));
+	}
+
+	return 0;
+}
+
+static int __devinit tc6393xb_probe(struct platform_device *dev)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	struct tc6393xb *tc6393xb;
+	struct resource *iomem;
+	struct resource *rscr;
+	int retval, temp;
+	int i;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem)
+		return -EINVAL;
+
+	tc6393xb = kzalloc(sizeof *tc6393xb, GFP_KERNEL);
+	if (!tc6393xb) {
+		retval = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	spin_lock_init(&tc6393xb->lock);
+
+	platform_set_drvdata(dev, tc6393xb);
+	tc6393xb->iomem = iomem;
+	tc6393xb->irq = platform_get_irq(dev, 0);
+	tc6393xb->irq_base = tcpd->irq_base;
+
+	tc6393xb->clk = clk_get(&dev->dev, "GPIO27_CLK" /* "CK3P6MI" */);
+	if (IS_ERR(tc6393xb->clk)) {
+		retval = PTR_ERR(tc6393xb->clk);
+		goto err_clk_get;
+	}
+
+	rscr = &tc6393xb->rscr;
+	rscr->name = "tc6393xb-core";
+	rscr->start = iomem->start;
+	rscr->end = iomem->start + 0xff;
+	rscr->flags = IORESOURCE_MEM;
+
+	retval = request_resource(iomem, rscr);
+	if (retval)
+		goto err_request_scr;
+
+	tc6393xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+	if (!tc6393xb->scr) {
+		retval = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	retval = clk_enable(tc6393xb->clk);
+	if (retval)
+		goto err_clk_enable;
+
+	retval = tcpd->enable(dev);
+	if (retval)
+		goto err_enable;
+
+	tc6393xb->suspend_state.fer = 0;
+	for (i = 0; i < 3; i++) {
+		tc6393xb->suspend_state.gpo_dsr[i] =
+			(tcpd->scr_gpo_dsr >> (8 * i)) & 0xff;
+		tc6393xb->suspend_state.gpo_doecr[i] =
+			(tcpd->scr_gpo_doecr >> (8 * i)) & 0xff;
+	}
+	/*
+	 * It may be necessary to change this back to
+	 * platform-dependant code
+	 */
+	tc6393xb->suspend_state.ccr = SCR_CCR_UNK1 |
+					SCR_CCR_HCLK_48;
+
+	retval = tc6393xb_hw_init(dev);
+	if (retval)
+		goto err_hw_init;
+
+	printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n",
+			ioread8(tc6393xb->scr + SCR_REVID),
+			(unsigned long) iomem->start, tc6393xb->irq);
+
+	tc6393xb->gpio.base = -1;
+
+	if (tcpd->gpio_base >= 0) {
+		retval = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base);
+		if (retval)
+			goto err_gpio_add;
+	}
+
+	if (tc6393xb->irq)
+		tc6393xb_attach_irq(dev);
+
+	return 0;
+
+	if (tc6393xb->irq)
+		tc6393xb_detach_irq(dev);
+
+err_gpio_add:
+	if (tc6393xb->gpio.base != -1)
+		temp = gpiochip_remove(&tc6393xb->gpio);
+err_hw_init:
+	tcpd->disable(dev);
+err_clk_enable:
+	clk_disable(tc6393xb->clk);
+err_enable:
+	iounmap(tc6393xb->scr);
+err_ioremap:
+	release_resource(&tc6393xb->rscr);
+err_request_scr:
+	clk_put(tc6393xb->clk);
+err_clk_get:
+	kfree(tc6393xb);
+err_kzalloc:
+	return retval;
+}
+
+static int __devexit tc6393xb_remove(struct platform_device *dev)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	int ret;
+
+	if (tc6393xb->irq)
+		tc6393xb_detach_irq(dev);
+
+	if (tc6393xb->gpio.base != -1) {
+		ret = gpiochip_remove(&tc6393xb->gpio);
+		if (ret) {
+			dev_err(&dev->dev, "Can't remove gpio chip: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = tcpd->disable(dev);
+
+	clk_disable(tc6393xb->clk);
+
+	iounmap(tc6393xb->scr);
+
+	release_resource(&tc6393xb->rscr);
+
+	platform_set_drvdata(dev, NULL);
+
+	clk_put(tc6393xb->clk);
+
+	kfree(tc6393xb);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	int i;
+
+
+	tc6393xb->suspend_state.ccr = ioread16(tc6393xb->scr + SCR_CCR);
+	tc6393xb->suspend_state.fer = ioread8(tc6393xb->scr + SCR_FER);
+
+	for (i = 0; i < 3; i++) {
+		tc6393xb->suspend_state.gpo_dsr[i] =
+			ioread8(tc6393xb->scr + SCR_GPO_DSR(i));
+		tc6393xb->suspend_state.gpo_doecr[i] =
+			ioread8(tc6393xb->scr + SCR_GPO_DOECR(i));
+		tc6393xb->suspend_state.gpi_bcr[i] =
+			ioread8(tc6393xb->scr + SCR_GPI_BCR(i));
+	}
+
+	return tcpd->suspend(dev);
+}
+
+static int tc6393xb_resume(struct platform_device *dev)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	int ret = tcpd->resume(dev);
+
+	if (ret)
+		return ret;
+
+	return tc6393xb_hw_init(dev);
+}
+#else
+#define tc6393xb_suspend NULL
+#define tc6393xb_resume NULL
+#endif
+
+static struct platform_driver tc6393xb_driver = {
+	.probe = tc6393xb_probe,
+	.remove = __devexit_p(tc6393xb_remove),
+	.suspend = tc6393xb_suspend,
+	.resume = tc6393xb_resume,
+
+	.driver = {
+		.name = "tc6393xb",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init tc6393xb_init(void)
+{
+	return platform_driver_register(&tc6393xb_driver);
+}
+
+static void __exit tc6393xb_exit(void)
+{
+	platform_driver_unregister(&tc6393xb_driver);
+}
+
+subsys_initcall(tc6393xb_init);
+module_exit(tc6393xb_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
+MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
+MODULE_ALIAS("platform:tc6393xb");
diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
new file mode 100644
index 00000000000..0e3dd4ca523
--- /dev/null
+++ b/include/linux/mfd/tc6393xb.h
@@ -0,0 +1,47 @@
+/*
+ * Toshiba TC6393XB SoC support
+ *
+ * Copyright(c) 2005-2006 Chris Humbert
+ * Copyright(c) 2005 Dirk Opfer
+ * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
+ * Copyright(c) 2007 Dmitry Baryshkov
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ * Based on locomo.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef TC6393XB_H
+#define TC6393XB_H
+
+/* Also one should provide the CK3P6MI clock */
+struct tc6393xb_platform_data {
+	u16	scr_pll2cr;	/* PLL2 Control */
+	u16	scr_gper;	/* GP Enable */
+	u32	scr_gpo_doecr;	/* GPO Data OE Control */
+	u32	scr_gpo_dsr;	/* GPO Data Set */
+
+	int	(*enable)(struct platform_device *dev);
+	int	(*disable)(struct platform_device *dev);
+	int	(*suspend)(struct platform_device *dev);
+	int	(*resume)(struct platform_device *dev);
+
+	int	irq_base;	/* a base for cascaded irq */
+	int	gpio_base;
+};
+
+/*
+ * Relative to irq_base
+ */
+#define	IRQ_TC6393_NAND		0
+#define	IRQ_TC6393_MMC		1
+#define	IRQ_TC6393_OHCI		2
+#define	IRQ_TC6393_SERIAL	3
+#define	IRQ_TC6393_FB		4
+
+#define	TC6393XB_NR_IRQS	8
+
+#endif
-- 
cgit v1.2.3


From bf0116e54e185fd63025f2b975f0f1616ffe41f1 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Sat, 14 Jun 2008 11:42:02 +0100
Subject: [ARM] 5097/1: Tosa: support TC6393XB device

Add definitions for Toshiba TC6393XB companion chip and register
the tc6393xb device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c        | 127 ++++++++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-pxa/irqs.h |   1 +
 include/asm-arm/arch-pxa/tosa.h |  44 +++++++++-----
 3 files changed, 158 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 7a89f764acf..2fe0998ac3f 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,7 +18,10 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
 #include <linux/pm.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
@@ -509,9 +512,127 @@ static struct platform_device tosaled_device = {
 	},
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+	[0] = {
+		.start	= TOSA_LCDC_PHYS,
+		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+
+	[1] = {
+		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+	if (rc)
+		goto err_req_pclr;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+	if (rc)
+		goto err_req_suspend;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+	if (rc)
+		goto err_req_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	if (rc)
+		goto err_dir_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	if (rc)
+		goto err_dir_suspend;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+	if (rc)
+		goto err_dir_pclr;
+
+	mdelay(1);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+	mdelay(10);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+	return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+	return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+	mdelay(10);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+	mdelay(10);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	return 0;
+}
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+	.scr_pll2cr	= 0x0cc1,
+	.scr_gper	= 0x3300,
+	.scr_gpo_dsr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+	.scr_gpo_doecr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+	.irq_base	= IRQ_BOARD_START,
+	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+
+	.enable		= tosa_tc6393xb_enable,
+	.disable	= tosa_tc6393xb_disable,
+	.suspend	= tosa_tc6393xb_suspend,
+	.resume		= tosa_tc6393xb_resume,
+};
+
+
+static struct platform_device tc6393xb_device = {
+	.name	= "tc6393xb",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_tc6393xb_setup,
+	},
+	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
+	.resource	= tc6393xb_resources,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
+	&tc6393xb_device,
 	&tosakbd_device,
 	&tosa_gpio_keys_device,
 	&tosaled_device,
@@ -533,6 +654,8 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+	int dummy;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
@@ -548,6 +671,10 @@ static void __init tosa_init(void)
 	/* enable batt_fault */
 	PMCR = 0x01;
 
+	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index b6c8fe37768..fa05e76f64e 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -180,6 +180,7 @@
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #elif defined(CONFIG_ARCH_LUBBOCK) || \
       defined(CONFIG_MACH_LOGICPD_PXA270) || \
+      defined(CONFIG_MACH_TOSA) || \
       defined(CONFIG_MACH_MAINSTONE) || \
       defined(CONFIG_MACH_PCM027) || \
       defined(CONFIG_MACH_MAGICIAN)
diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
index 18822621615..a16c103b725 100644
--- a/include/asm-arm/arch-pxa/tosa.h
+++ b/include/asm-arm/arch-pxa/tosa.h
@@ -25,7 +25,7 @@
  */
 #define TOSA_SCOOP_GPIO_BASE		NR_BUILTIN_GPIO
 #define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
-#define TOSA_SCOOP_TC6393_REST_IN	SCOOP_GPCR_PA12
+#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
 #define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
 #define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
 #define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
@@ -35,11 +35,9 @@
 #define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
 
 /* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_IO_DIR     ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
+#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
 		TOSA_SCOOP_AUD_PWR_ON |\
-		TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
-/* GPIO out put level when init   1: Hi */
-#define TOSA_SCOOP_IO_OUT     ( TOSA_SCOOP_TC6393_REST_IN )
+		TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN)
 
 /*
  * SCOOP2 jacket GPIOs
@@ -49,16 +47,34 @@
 #define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
 #define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
 #define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
-#define TOSA_SCOOP_JC_TC6393_SUSPEND	SCOOP_GPCR_PA15
-#define TOSA_SCOOP_JC_TC3693_L3V_ON	SCOOP_GPCR_PA16
+#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
+#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
 #define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
 #define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
 #define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
 
 /* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR ( \
-		TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
-		TOSA_SCOOP_JC_CARD_LIMIT_SEL )
+#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
+
+/*
+ * TC6393XB GPIOs
+ */
+#define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
+#define TOSA_TC6393XB_GPIO_BIT(gpio)	(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
+
+#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
+#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
+#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
+#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
+#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
+#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
+#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
+#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
+#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
+#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
+#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
+#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
 
 /*
  * Timing Generator
@@ -84,13 +100,13 @@
 #define TOSA_GPIO_JACKET_DETECT		(7)
 #define TOSA_GPIO_nSD_DETECT		(9)
 #define TOSA_GPIO_nSD_INT		(10)
-#define TOSA_GPIO_TC6393_CLK		(11)
+#define TOSA_GPIO_TC6393XB_CLK		(11)
 #define TOSA_GPIO_BAT1_CRG		(12)
 #define TOSA_GPIO_CF_CD			(13)
 #define TOSA_GPIO_BAT0_CRG		(14)
-#define TOSA_GPIO_TC6393_INT		(15)
+#define TOSA_GPIO_TC6393XB_INT		(15)
 #define TOSA_GPIO_BAT0_LOW		(17)
-#define TOSA_GPIO_TC6393_RDY		(18)
+#define TOSA_GPIO_TC6393XB_RDY		(18)
 #define TOSA_GPIO_ON_RESET		(19)
 #define TOSA_GPIO_EAR_IN		(20)
 #define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
@@ -138,7 +154,7 @@
 #define TOSA_IRQ_GPIO_BAT1_CRG      	IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
 #define TOSA_IRQ_GPIO_CF_CD         	IRQ_GPIO(TOSA_GPIO_CF_CD)
 #define TOSA_IRQ_GPIO_BAT0_CRG      	IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393_INT    	IRQ_GPIO(TOSA_GPIO_TC6393_INT)
+#define TOSA_IRQ_GPIO_TC6393XB_INT    	IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
 #define TOSA_IRQ_GPIO_BAT0_LOW      	IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
 #define TOSA_IRQ_GPIO_EAR_IN        	IRQ_GPIO(TOSA_GPIO_EAR_IN)
 #define TOSA_IRQ_GPIO_CF_IRQ        	IRQ_GPIO(TOSA_GPIO_CF_IRQ)
-- 
cgit v1.2.3


From 4440cbd69fc71bab8ed932e237b2a453b365ab9b Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Sat, 14 Jun 2008 11:42:57 +0100
Subject: [ARM] 5098/1: fix sound/soc/pxa/tosa.c to new gpio api

The sound/soc/pxa/tosa.c contains dependencies on parts that never
ever hit mainline. Replace them with current support for tc6393xb.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 sound/soc/pxa/Kconfig |  1 +
 sound/soc/pxa/tosa.c  | 29 ++++++++++++++++++++---------
 2 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 484f883459e..329b33f37ef 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -48,6 +48,7 @@ config SND_PXA2XX_SOC_POODLE
 config SND_PXA2XX_SOC_TOSA
 	tristate "SoC AC97 Audio support for Tosa"
 	depends on SND_PXA2XX_SOC && MACH_TOSA
+	depends on MFD_TC6393XB
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index 7346d7e5d06..c1462c4d139 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -31,7 +32,7 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware/tmio.h>
+#include <asm/arch/tosa.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/audio.h>
@@ -138,10 +139,7 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol,
 static int tosa_hp_event(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *k, int event)
 {
-	if (SND_SOC_DAPM_EVENT_ON(event))
-		set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
-	else
-		reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
+	gpio_set_value(TOSA_GPIO_L_MUTE, SND_SOC_DAPM_EVENT_ON(event) ? 1 :0);
 	return 0;
 }
 
@@ -261,16 +259,28 @@ static int __init tosa_init(void)
 	if (!machine_is_tosa())
 		return -ENODEV;
 
+	ret = gpio_request(TOSA_GPIO_L_MUTE, "Headphone Jack");
+	if (ret)
+		return ret;
+	gpio_direction_output(TOSA_GPIO_L_MUTE, 0);
+
 	tosa_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!tosa_snd_device)
-		return -ENOMEM;
+	if (!tosa_snd_device) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
 
 	platform_set_drvdata(tosa_snd_device, &tosa_snd_devdata);
 	tosa_snd_devdata.dev = &tosa_snd_device->dev;
 	ret = platform_device_add(tosa_snd_device);
 
-	if (ret)
-		platform_device_put(tosa_snd_device);
+	if (!ret)
+		return 0;
+
+	platform_device_put(tosa_snd_device);
+
+err_alloc:
+	gpio_free(TOSA_GPIO_L_MUTE);
 
 	return ret;
 }
@@ -278,6 +288,7 @@ static int __init tosa_init(void)
 static void __exit tosa_exit(void)
 {
 	platform_device_unregister(tosa_snd_device);
+	gpio_free(TOSA_GPIO_L_MUTE);
 }
 
 module_init(tosa_init);
-- 
cgit v1.2.3


From 53b14ea336ca45f34821ad78a1b45c2315283621 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Sat, 14 Jun 2008 11:43:36 +0100
Subject: [ARM] 5099/1: Tosa: support AC-in detection.

Add support for ac-in via pda_power device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 2fe0998ac3f..f3b12d2897a 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -27,6 +27,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -409,6 +410,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 	.shutdown = tosa_irda_shutdown,
 };
 
+/*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+	gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+	"jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+	.init			= tosa_power_init,
+	.is_ac_online		= tosa_power_ac_online,
+	.exit			= tosa_power_exit,
+	.supplied_to		= tosa_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.end		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device tosa_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &tosa_power_data,
+	.resource		= tosa_power_resource,
+	.num_resources		= ARRAY_SIZE(tosa_power_resource),
+};
+
 /*
  * Tosa Keyboard
  */
@@ -633,6 +698,7 @@ static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
 	&tc6393xb_device,
+	&tosa_power_device,
 	&tosakbd_device,
 	&tosa_gpio_keys_device,
 	&tosaled_device,
-- 
cgit v1.2.3


From aa613de676986f136fa6f48a4d709b5d264f4f38 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Fri, 27 Jun 2008 10:37:19 +0100
Subject: [ARM] 5127/1: Core MFD support

This patch provides a common subdevice registration system for MFD type
chips, using platfrom device.

Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/mfd/Kconfig      |   4 ++
 drivers/mfd/Makefile     |   2 +
 drivers/mfd/mfd-core.c   | 114 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/core.h |  55 +++++++++++++++++++++++
 4 files changed, 175 insertions(+)
 create mode 100644 drivers/mfd/mfd-core.c
 create mode 100644 include/linux/mfd/core.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1a1ac262fc8..8ebc0be1095 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -5,6 +5,10 @@
 menu "Multifunction device drivers"
 	depends on HAS_IOMEM
 
+config MFD_CORE
+	tristate
+	default n
+
 config MFD_SM501
 	tristate "Support for Silicon Motion SM501"
 	 ---help---
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b4168442d53..33daa2f45dd 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
 
+obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
+
 obj-$(CONFIG_MCP)		+= mcp-core.o
 obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
new file mode 100644
index 00000000000..d7d88ce053a
--- /dev/null
+++ b/drivers/mfd/mfd-core.c
@@ -0,0 +1,114 @@
+/*
+ * drivers/mfd/mfd-core.c
+ *
+ * core MFD support
+ * Copyright (c) 2006 Ian Molton
+ * Copyright (c) 2007,2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+
+static int mfd_add_device(struct platform_device *parent,
+		const struct mfd_cell *cell,
+		struct resource *mem_base,
+		int irq_base)
+{
+	struct resource res[cell->num_resources];
+	struct platform_device *pdev;
+	int ret = -ENOMEM;
+	int r;
+
+	pdev = platform_device_alloc(cell->name, parent->id);
+	if (!pdev)
+		goto fail_alloc;
+
+	pdev->dev.parent = &parent->dev;
+
+	ret = platform_device_add_data(pdev,
+			cell, sizeof(struct mfd_cell));
+	if (ret)
+		goto fail_device;
+
+	memzero(res, sizeof(res));
+	for (r = 0; r < cell->num_resources; r++) {
+		res[r].name = cell->resources[r].name;
+		res[r].flags = cell->resources[r].flags;
+
+		/* Find out base to use */
+		if (cell->resources[r].flags & IORESOURCE_MEM) {
+			res[r].parent = mem_base;
+			res[r].start = mem_base->start +
+				cell->resources[r].start;
+			res[r].end = mem_base->start +
+				cell->resources[r].end;
+		} else if (cell->resources[r].flags & IORESOURCE_IRQ) {
+			res[r].start = irq_base +
+				cell->resources[r].start;
+			res[r].end   = irq_base +
+				cell->resources[r].end;
+		} else {
+			res[r].parent = cell->resources[r].parent;
+			res[r].start = cell->resources[r].start;
+			res[r].end   = cell->resources[r].end;
+		}
+	}
+
+	platform_device_add_resources(pdev, res, cell->num_resources);
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto fail_device;
+
+	return 0;
+
+/*	platform_device_del(pdev); */
+fail_device:
+	platform_device_put(pdev);
+fail_alloc:
+	return ret;
+}
+
+int mfd_add_devices(
+		struct platform_device *parent,
+		const struct mfd_cell *cells, int n_devs,
+		struct resource *mem_base,
+		int irq_base)
+{
+	int i;
+	int ret = 0;
+
+	for (i = 0; i < n_devs; i++) {
+		ret = mfd_add_device(parent, cells + i, mem_base, irq_base);
+		if (ret)
+			break;
+	}
+
+	if (ret)
+		mfd_remove_devices(parent);
+
+	return ret;
+}
+EXPORT_SYMBOL(mfd_add_devices);
+
+static int mfd_remove_devices_fn(struct device *dev, void *unused)
+{
+	platform_device_unregister(
+			container_of(dev, struct platform_device, dev));
+	return 0;
+}
+
+void mfd_remove_devices(struct platform_device *parent)
+{
+	device_for_each_child(&parent->dev, NULL, mfd_remove_devices_fn);
+}
+EXPORT_SYMBOL(mfd_remove_devices);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov");
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
new file mode 100644
index 00000000000..bb3dd054592
--- /dev/null
+++ b/include/linux/mfd/core.h
@@ -0,0 +1,55 @@
+#ifndef MFD_CORE_H
+#define MFD_CORE_H
+/*
+ * drivers/mfd/mfd-core.h
+ *
+ * core MFD support
+ * Copyright (c) 2006 Ian Molton
+ * Copyright (c) 2007 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+/*
+ * This struct describes the MFD part ("cell").
+ * After registration the copy of this structure will become the platform data
+ * of the resulting platform_device
+ */
+struct mfd_cell {
+	const char		*name;
+
+	int			(*enable)(struct platform_device *dev);
+	int			(*disable)(struct platform_device *dev);
+	int			(*suspend)(struct platform_device *dev);
+	int			(*resume)(struct platform_device *dev);
+
+	void			*driver_data; /* driver-specific data */
+
+	/*
+	 * This resources can be specified relatievly to the parent device.
+	 * For accessing device you should use resources from device
+	 */
+	int			num_resources;
+	const struct resource	*resources;
+};
+
+static inline struct mfd_cell *
+mfd_get_cell(struct platform_device *pdev)
+{
+	return (struct mfd_cell *)pdev->dev.platform_data;
+}
+
+extern int mfd_add_devices(
+		struct platform_device *parent,
+		const struct mfd_cell *cells, int n_devs,
+		struct resource *mem_base,
+		int irq_base);
+
+extern void mfd_remove_devices(struct platform_device *parent);
+
+#endif
-- 
cgit v1.2.3


From f024ff10b1ab13da4d626366019fd05c49721af7 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Fri, 27 Jun 2008 10:37:57 +0100
Subject: [ARM] 5128/1: tc6393xb: tmio-nand support

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/mfd/Kconfig          |  1 +
 drivers/mfd/tc6393xb.c       | 63 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/tc6393xb.h |  2 ++
 include/linux/mfd/tmio.h     | 17 ++++++++++++
 4 files changed, 83 insertions(+)
 create mode 100644 include/linux/mfd/tmio.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8ebc0be1095..7dff105e8f8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -45,6 +45,7 @@ config HTC_PASIC3
 config MFD_TC6393XB
 	bool "Support Toshiba TC6393XB"
 	depends on HAVE_GPIO_LIB
+	select MFD_CORE
 	help
 	  Support for Toshiba Mobile IO Controller TC6393XB
 
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 4d7192edefe..2d87501b6fd 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -21,6 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
 #include <linux/mfd/tc6393xb.h>
 #include <linux/gpio.h>
 
@@ -108,6 +110,59 @@ struct tc6393xb {
 	int			irq_base;
 };
 
+enum {
+	TC6393XB_CELL_NAND,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int tc6393xb_nand_enable(struct platform_device *nand)
+{
+	struct platform_device *dev = to_platform_device(nand->dev.parent);
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+
+	/* SMD buffer on */
+	dev_dbg(&dev->dev, "SMD buffer on\n");
+	iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
+
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+
+	return 0;
+}
+
+static struct resource __devinitdata tc6393xb_nand_resources[] = {
+	{
+		.name	= TMIO_NAND_CONFIG,
+		.start	= 0x0100,
+		.end	= 0x01ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= TMIO_NAND_CONTROL,
+		.start	= 0x1000,
+		.end	= 0x1007,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= TMIO_NAND_IRQ,
+		.start	= IRQ_TC6393_NAND,
+		.end	= IRQ_TC6393_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell __devinitdata tc6393xb_cells[] = {
+	[TC6393XB_CELL_NAND] = {
+		.name = "tmio-nand",
+		.enable = tc6393xb_nand_enable,
+		.num_resources = ARRAY_SIZE(tc6393xb_nand_resources),
+		.resources = tc6393xb_nand_resources,
+	},
+};
+
 /*--------------------------------------------------------------------------*/
 
 static int tc6393xb_gpio_get(struct gpio_chip *chip,
@@ -410,6 +465,12 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 	if (tc6393xb->irq)
 		tc6393xb_attach_irq(dev);
 
+	tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data;
+
+	retval = mfd_add_devices(dev,
+			tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
+			iomem, tcpd->irq_base);
+
 	return 0;
 
 	if (tc6393xb->irq)
@@ -440,6 +501,8 @@ static int __devexit tc6393xb_remove(struct platform_device *dev)
 	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
 	int ret;
 
+	mfd_remove_devices(dev);
+
 	if (tc6393xb->irq)
 		tc6393xb_detach_irq(dev);
 
diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
index 0e3dd4ca523..7cc824a58f7 100644
--- a/include/linux/mfd/tc6393xb.h
+++ b/include/linux/mfd/tc6393xb.h
@@ -31,6 +31,8 @@ struct tc6393xb_platform_data {
 
 	int	irq_base;	/* a base for cascaded irq */
 	int	gpio_base;
+
+	struct tmio_nand_data	*nand_data;
 };
 
 /*
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
new file mode 100644
index 00000000000..9438d8c9ac1
--- /dev/null
+++ b/include/linux/mfd/tmio.h
@@ -0,0 +1,17 @@
+#ifndef MFD_TMIO_H
+#define MFD_TMIO_H
+
+/*
+ * data for the NAND controller
+ */
+struct tmio_nand_data {
+	struct nand_bbt_descr	*badblock_pattern;
+	struct mtd_partition	*partition;
+	unsigned int		num_partitions;
+};
+
+#define TMIO_NAND_CONFIG	"tmio-nand-config"
+#define TMIO_NAND_CONTROL	"tmio-nand-control"
+#define TMIO_NAND_IRQ		"tmio-nand"
+
+#endif
-- 
cgit v1.2.3


From 5289fecda021828af85fccc8cc2613a85d0fcf52 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Fri, 27 Jun 2008 10:38:44 +0100
Subject: [ARM] 5129/1: tosa: tmio-nand data

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index f3b12d2897a..fa903e7ae62 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -22,6 +22,9 @@
 #include <linux/fb.h>
 #include <linux/mmc/host.h>
 #include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pm.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
@@ -666,6 +669,39 @@ static int tosa_tc6393xb_suspend(struct platform_device *dev)
 	return 0;
 }
 
+static struct mtd_partition tosa_nand_partition[] = {
+	{
+		.name	= "smf",
+		.offset	= 0,
+		.size	= 7 * 1024 * 1024,
+	},
+	{
+		.name	= "root",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 28 * 1024 * 1024,
+	},
+	{
+		.name	= "home",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+	.options	= 0,
+	.offs		= 4,
+	.len		= 2,
+	.pattern	= scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+	.num_partitions	= ARRAY_SIZE(tosa_nand_partition),
+	.partition	= tosa_nand_partition,
+	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
 static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
 	.scr_pll2cr	= 0x0cc1,
 	.scr_gper	= 0x3300,
@@ -681,6 +717,8 @@ static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
 	.disable	= tosa_tc6393xb_disable,
 	.suspend	= tosa_tc6393xb_suspend,
 	.resume		= tosa_tc6393xb_resume,
+
+	.nand_data	= &tosa_tc6393xb_nand_config,
 };
 
 
-- 
cgit v1.2.3


From 16b32fd0a35b30cbd67395cfcbd360354db44f39 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Sat, 5 Jul 2008 09:02:48 +0100
Subject: [ARM] 5150/1: Tosa: support built-in bluetooth power-up

The driver is pretty much generic and will be later shared with
a few other devices, like hx4700 ipaq.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig          |   8 ++
 arch/arm/mach-pxa/Makefile         |   2 +
 arch/arm/mach-pxa/tosa-bt.c        | 150 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/tosa.c           |  17 ++++-
 include/asm-arm/arch-pxa/tosa.h    |   7 +-
 include/asm-arm/arch-pxa/tosa_bt.h |  22 ++++++
 6 files changed, 201 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-pxa/tosa-bt.c
 create mode 100644 include/asm-arm/arch-pxa/tosa_bt.h

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 5da7a682049..6c162f8fdce 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -273,4 +273,12 @@ config PXA_SSP
 	tristate
 	help
 	  Enable support for PXA2xx SSP ports
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c9e66fbe622..18e0b249f7c 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -58,3 +58,5 @@ obj-$(CONFIG_LEDS)		+= $(led-y)
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 00000000000..7d8505466e5
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <asm/arch/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 0);
+	gpio_set_value(data->gpio_pwr, 1);
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(20);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(10);
+	gpio_set_value(data->gpio_pwr, 0);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+	pr_info("BT_RADIO going: %s\n",
+			state == RFKILL_STATE_ON ? "on" : "off");
+
+	if (state == RFKILL_STATE_ON) {
+		pr_info("TOSA_BT: going ON\n");
+		tosa_bt_on(data);
+	} else {
+		pr_info("TOSA_BT: going OFF\n");
+		tosa_bt_off(data);
+	}
+	return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+	int rc;
+	struct rfkill *rfk;
+
+	struct tosa_bt_data *data = dev->dev.platform_data;
+
+	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+	if (rc)
+		goto err_reset;
+	rc = gpio_direction_output(data->gpio_reset, 0);
+	if (rc)
+		goto err_reset_dir;
+	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+	if (rc)
+		goto err_pwr;
+	rc = gpio_direction_output(data->gpio_pwr, 0);
+	if (rc)
+		goto err_pwr_dir;
+
+	rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+	if (!rfk) {
+		rc = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfk->name = "tosa-bt";
+	rfk->toggle_radio = tosa_bt_toggle_radio;
+	rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+	rfk->led_trigger.name = "tosa-bt";
+#endif
+
+	rc = rfkill_register(rfk);
+	if (rc)
+		goto err_rfkill;
+
+	platform_set_drvdata(dev, rfk);
+
+	return 0;
+
+err_rfkill:
+	if (rfk)
+		rfkill_free(rfk);
+	rfk = NULL;
+err_rfk_alloc:
+	tosa_bt_off(data);
+err_pwr_dir:
+	gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+	gpio_free(data->gpio_reset);
+err_reset:
+	return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+	struct tosa_bt_data *data = dev->dev.platform_data;
+	struct rfkill *rfk = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	if (rfk)
+		rfkill_unregister(rfk);
+	rfk = NULL;
+
+	tosa_bt_off(data);
+
+	gpio_free(data->gpio_pwr);
+	gpio_free(data->gpio_reset);
+
+	return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+	.probe = tosa_bt_probe,
+	.remove = __devexit_p(tosa_bt_remove),
+
+	.driver = {
+		.name = "tosa-bt",
+		.owner = THIS_MODULE,
+	},
+};
+
+
+static int __init tosa_bt_init(void)
+{
+	return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+	platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index fa903e7ae62..5a9d329f504 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -31,6 +31,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
+#include <linux/rfkill.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -40,6 +41,7 @@
 #include <asm/arch/i2c.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
+#include <asm/arch/tosa_bt.h>
 
 #include <asm/mach/arch.h>
 #include <asm/arch/tosa.h>
@@ -562,7 +564,7 @@ static struct gpio_led tosa_gpio_leds[] = {
 	},
 	{
 		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "none",
+		.default_trigger	= "tosa-bt",
 		.gpio			= TOSA_GPIO_BT_LED,
 	},
 };
@@ -732,6 +734,18 @@ static struct platform_device tc6393xb_device = {
 	.resource	= tc6393xb_resources,
 };
 
+static struct tosa_bt_data tosa_bt_data = {
+	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
+	.gpio_reset	= TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+	.name	= "tosa-bt",
+	.id	= -1,
+	.dev.platform_data = &tosa_bt_data,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
@@ -740,6 +754,7 @@ static struct platform_device *devices[] __initdata = {
 	&tosakbd_device,
 	&tosa_gpio_keys_device,
 	&tosaled_device,
+	&tosa_bt_device,
 };
 
 static void tosa_poweroff(void)
diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
index a16c103b725..a72803f0461 100644
--- a/include/asm-arm/arch-pxa/tosa.h
+++ b/include/asm-arm/arch-pxa/tosa.h
@@ -30,14 +30,13 @@
 #define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
 #define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
 #define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
-#define TOSA_SCOOP_BT_RESET		SCOOP_GPCR_PA17
-#define TOSA_SCOOP_BT_PWR_EN		SCOOP_GPCR_PA18
+#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
+#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
 #define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
 
 /* GPIO Direction   1 : output mode / 0:input mode */
 #define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
-		TOSA_SCOOP_AUD_PWR_ON |\
-		TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN)
+		TOSA_SCOOP_AUD_PWR_ON)
 
 /*
  * SCOOP2 jacket GPIOs
diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/include/asm-arm/arch-pxa/tosa_bt.h
new file mode 100644
index 00000000000..efc3c3d3b75
--- /dev/null
+++ b/include/asm-arm/arch-pxa/tosa_bt.h
@@ -0,0 +1,22 @@
+/*
+ * Tosa bluetooth built-in chip control.
+ *
+ * Later it may be shared with some other platforms.
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef TOSA_BT_H
+#define TOSA_BT_H
+
+struct tosa_bt_data {
+	int gpio_pwr;
+	int gpio_reset;
+};
+
+#endif
+
-- 
cgit v1.2.3


From 0121702dbaf961b4c996f2579d4286a0a1ed877c Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Mon, 7 Jul 2008 10:09:29 +0100
Subject: [ARM] 5151/1: Tosa: remove double inclusion of linux/delay.h

The patch applies to the linux-next tree.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/tosa.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 5a9d329f504..2d49de572ba 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -26,7 +26,6 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pm.h>
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
-- 
cgit v1.2.3


From 938870491f0cad030b358af47e28d124b72702d1 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Mon, 7 Jul 2008 10:50:06 +0100
Subject: [ARM] 5152/1: Add myself to tosa maintainers list

Since the beginning of this year I'm providing fixes and updates
for the Sharp SL-6000 (tosa). Add myself as one of the maintainers
of the machine.

Cc: Dirk Opfer <dirk@opfer-online.de>
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index c68a1189140..616b97dca11 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -567,6 +567,8 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
+P:	Dmitry Baryshkov
+M:	dbaryshkov@gmail.com
 P:	Dirk Opfer
 M:	dirk@opfer-online.de
 S:	Maintained
-- 
cgit v1.2.3


From 51ee87f27a1d2c0e08492924f2fb0223c4c704d9 Mon Sep 17 00:00:00 2001
From: Li Yang <leoli@freescale.com>
Date: Thu, 29 May 2008 23:25:45 -0700
Subject: fsldma: fix incorrect exit path for initialization

Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: Zhang Wei <zw@zh-kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/fsldma.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 054eabffc18..724f6fdd0af 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -809,8 +809,7 @@ static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan)
 	if (!src) {
 		dev_err(fsl_chan->dev,
 				"selftest: Cannot alloc memory for test!\n");
-		err = -ENOMEM;
-		goto out;
+		return -ENOMEM;
 	}
 
 	dest = src + test_size;
@@ -842,7 +841,7 @@ static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan)
 	if (fsl_dma_is_complete(chan, cookie, NULL, NULL) != DMA_SUCCESS) {
 		dev_err(fsl_chan->dev, "selftest: Time out!\n");
 		err = -ENODEV;
-		goto out;
+		goto free_resources;
 	}
 
 	/* Test free and re-alloc channel resources */
@@ -927,8 +926,7 @@ static int __devinit of_fsl_dma_chan_probe(struct of_device *dev,
 	if (!new_fsl_chan) {
 		dev_err(&dev->dev, "No free memory for allocating "
 				"dma channels!\n");
-		err = -ENOMEM;
-		goto err;
+		return -ENOMEM;
 	}
 
 	/* get dma channel register base */
@@ -936,7 +934,7 @@ static int __devinit of_fsl_dma_chan_probe(struct of_device *dev,
 	if (err) {
 		dev_err(&dev->dev, "Can't get %s property 'reg'\n",
 				dev->node->full_name);
-		goto err;
+		goto err_no_reg;
 	}
 
 	new_fsl_chan->feature = *(u32 *)match->data;
@@ -958,7 +956,7 @@ static int __devinit of_fsl_dma_chan_probe(struct of_device *dev,
 		dev_err(&dev->dev, "There is no %d channel!\n",
 				new_fsl_chan->id);
 		err = -EINVAL;
-		goto err;
+		goto err_no_chan;
 	}
 	fdev->chan[new_fsl_chan->id] = new_fsl_chan;
 	tasklet_init(&new_fsl_chan->tasklet, dma_do_tasklet,
@@ -997,23 +995,26 @@ static int __devinit of_fsl_dma_chan_probe(struct of_device *dev,
 		if (err) {
 			dev_err(&dev->dev, "DMA channel %s request_irq error "
 				"with return %d\n", dev->node->full_name, err);
-			goto err;
+			goto err_no_irq;
 		}
 	}
 
 	err = fsl_dma_self_test(new_fsl_chan);
 	if (err)
-		goto err;
+		goto err_self_test;
 
 	dev_info(&dev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
 				match->compatible, new_fsl_chan->irq);
 
 	return 0;
-err:
-	dma_halt(new_fsl_chan);
-	iounmap(new_fsl_chan->reg_base);
+
+err_self_test:
 	free_irq(new_fsl_chan->irq, new_fsl_chan);
+err_no_irq:
 	list_del(&new_fsl_chan->common.device_node);
+err_no_chan:
+	iounmap(new_fsl_chan->reg_base);
+err_no_reg:
 	kfree(new_fsl_chan);
 	return err;
 }
@@ -1054,8 +1055,7 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev,
 	fdev = kzalloc(sizeof(struct fsl_dma_device), GFP_KERNEL);
 	if (!fdev) {
 		dev_err(&dev->dev, "No enough memory for 'priv'\n");
-		err = -ENOMEM;
-		goto err;
+		return -ENOMEM;
 	}
 	fdev->dev = &dev->dev;
 	INIT_LIST_HEAD(&fdev->common.channels);
@@ -1065,7 +1065,7 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev,
 	if (err) {
 		dev_err(&dev->dev, "Can't get %s property 'reg'\n",
 				dev->node->full_name);
-		goto err;
+		goto err_no_reg;
 	}
 
 	dev_info(&dev->dev, "Probe the Freescale DMA driver for %s "
@@ -1103,6 +1103,7 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev,
 
 err:
 	iounmap(fdev->reg_base);
+err_no_reg:
 	kfree(fdev);
 	return err;
 }
-- 
cgit v1.2.3


From 65bc3ffe8c067e387fe5557bc3ea5071071f6af9 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 5 Jun 2008 23:26:11 -0700
Subject: async_tx: fix async_memset compile error

commit 636bdeaa 'dmaengine: ack to flags: make use of the unused bits in
the 'ack' field' missed an ->ack conversion in
crypto/async_tx/async_memset.c

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 crypto/async_tx/async_memset.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/crypto/async_tx/async_memset.c b/crypto/async_tx/async_memset.c
index f5ff3906b03..27a97dc90a7 100644
--- a/crypto/async_tx/async_memset.c
+++ b/crypto/async_tx/async_memset.c
@@ -76,7 +76,7 @@ async_memset(struct page *dest, int val, unsigned int offset,
 			/* if ack is already set then we cannot be sure
 			 * we are referring to the correct operation
 			 */
-			BUG_ON(depend_tx->ack);
+			BUG_ON(async_tx_test_ack(depend_tx));
 			if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
 				panic("%s: DMA_ERROR waiting for depend_tx\n",
 					__func__);
-- 
cgit v1.2.3


From 1099dc79245719c046e632212ec09d6ec1154ef5 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Tue, 8 Jul 2008 11:58:05 -0700
Subject: dmaengine: Couple DMA channels to their physical DMA device

Set the 'parent' field of channel class devices to point to the
physical DMA device initialized by the DMA engine driver.

This allows drivers to use chan->dev.parent for syncing DMA buffers
and adds a 'device' symlink to the real device in
/sys/class/dma/dmaXchanY.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/dmaengine.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 97b329e7679..99c22b42bad 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -378,7 +378,7 @@ int dma_async_device_register(struct dma_device *device)
 
 		chan->chan_id = chancnt++;
 		chan->dev.class = &dma_devclass;
-		chan->dev.parent = NULL;
+		chan->dev.parent = device->dev;
 		snprintf(chan->dev.bus_id, BUS_ID_SIZE, "dma%dchan%d",
 		         device->dev_id, chan->chan_id);
 
-- 
cgit v1.2.3


From 9c402f4e196290692d998b188f9094deb1619e57 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Fri, 27 Jun 2008 01:21:11 -0700
Subject: dmaengine: remove arch dependency from DMADEVICES

The dependency is redundant since all drivers set their specific arch
dependencies.  The NET_DMA option is modified to be enabled only on platforms
where it is known to have a positive effect.  HAS_DMA is added as an explicit
dependency for the DMADEVICES menu.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/Kconfig | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 6239c3df30a..e4dd0065da3 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -4,13 +4,14 @@
 
 menuconfig DMADEVICES
 	bool "DMA Engine support"
-	depends on (PCI && X86) || ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX || PPC
-	depends on !HIGHMEM64G
+	depends on !HIGHMEM64G && HAS_DMA
 	help
 	  DMA engines can do asynchronous data transfers without
 	  involving the host CPU.  Currently, this framework can be
 	  used to offload memory copies in the network stack and
-	  RAID operations in the MD driver.
+	  RAID operations in the MD driver.  This menu only presents
+	  DMA Device drivers supported by the configured arch, it may
+	  be empty in some cases.
 
 if DMADEVICES
 
@@ -55,10 +56,12 @@ comment "DMA Clients"
 config NET_DMA
 	bool "Network: TCP receive copy offload"
 	depends on DMA_ENGINE && NET
+	default (INTEL_IOATDMA || FSL_DMA)
 	help
 	  This enables the use of DMA engines in the network stack to
 	  offload receive copy-to-user operations, freeing CPU cycles.
-	  Since this is the main user of the DMA engine, it should be enabled;
-	  say Y here.
+
+	  Say Y here if you enabled INTEL_IOATDMA or FSL_DMA, otherwise
+	  say N.
 
 endif
-- 
cgit v1.2.3


From 7cc5bf9a3a84e5a02e23e5739fb894790b37c101 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Tue, 8 Jul 2008 11:58:21 -0700
Subject: dmaengine: track the number of clients using a channel

Haavard's dma-slave interface would like to test for exclusive access to a
channel.  The standard channel refcounting is not sufficient in that it
tracks more than just client references, it is also inaccurate as reference
counts are percpu until the channel is removed.

This change also enables a future fix to deallocate resources when a client
declines to use a capable channel.

Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/dmaengine.c   | 14 ++++++++++----
 include/linux/dmaengine.h |  2 ++
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 99c22b42bad..10de69eb1a3 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -183,9 +183,10 @@ static void dma_client_chan_alloc(struct dma_client *client)
 				/* we are done once this client rejects
 				 * an available resource
 				 */
-				if (ack == DMA_ACK)
+				if (ack == DMA_ACK) {
 					dma_chan_get(chan);
-				else if (ack == DMA_NAK)
+					chan->client_count++;
+				} else if (ack == DMA_NAK)
 					return;
 			}
 		}
@@ -272,8 +273,10 @@ static void dma_clients_notify_removed(struct dma_chan *chan)
 		/* client was holding resources for this channel so
 		 * free it
 		 */
-		if (ack == DMA_ACK)
+		if (ack == DMA_ACK) {
 			dma_chan_put(chan);
+			chan->client_count--;
+		}
 	}
 
 	mutex_unlock(&dma_list_mutex);
@@ -313,8 +316,10 @@ void dma_async_client_unregister(struct dma_client *client)
 			ack = client->event_callback(client, chan,
 				DMA_RESOURCE_REMOVED);
 
-			if (ack == DMA_ACK)
+			if (ack == DMA_ACK) {
 				dma_chan_put(chan);
+				chan->client_count--;
+			}
 		}
 
 	list_del(&client->global_node);
@@ -394,6 +399,7 @@ int dma_async_device_register(struct dma_device *device)
 		kref_get(&device->refcount);
 		kref_get(&device->refcount);
 		kref_init(&chan->refcount);
+		chan->client_count = 0;
 		chan->slow_ref = 0;
 		INIT_RCU_HEAD(&chan->rcu);
 	}
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index d08a5c5eb92..6432b834322 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -139,6 +139,7 @@ struct dma_chan_percpu {
  * @rcu: the DMA channel's RCU head
  * @device_node: used to add this to the device chan list
  * @local: per-cpu pointer to a struct dma_chan_percpu
+ * @client-count: how many clients are using this channel
  */
 struct dma_chan {
 	struct dma_device *device;
@@ -154,6 +155,7 @@ struct dma_chan {
 
 	struct list_head device_node;
 	struct dma_chan_percpu *local;
+	int client_count;
 };
 
 #define to_dma_chan(p) container_of(p, struct dma_chan, dev)
-- 
cgit v1.2.3


From ebabe2762607147d28aa395ea6df2a0ee7f795a1 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Tue, 8 Jul 2008 11:58:28 -0700
Subject: iop-adma: fix platform driver hotplug/coldplug

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform
modalias is prefixed with "platform:". Add MODULE_ALIAS() to most
of the hotpluggable platform drivers, to re-enable auto loading.

Cc: <stable@kernel.org>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/iop-adma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 0ec0f431e6a..4e6b052c065 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -1387,6 +1387,8 @@ static void iop_chan_start_null_xor(struct iop_adma_chan *iop_chan)
 	spin_unlock_bh(&iop_chan->lock);
 }
 
+MODULE_ALIAS("platform:iop-adma");
+
 static struct platform_driver iop_adma_driver = {
 	.probe		= iop_adma_probe,
 	.remove		= iop_adma_remove,
-- 
cgit v1.2.3


From ff7b04796d9866327ea76e1393f1e902ef032f84 Mon Sep 17 00:00:00 2001
From: Saeed Bishara <saeed@marvell.com>
Date: Tue, 8 Jul 2008 11:58:36 -0700
Subject: dmaengine: DMA engine driver for Marvell XOR engine

The XOR engine found in Marvell's SoCs and system controllers
provides XOR and DMA operation, iSCSI CRC32C calculation, memory
initialization, and memory ECC error cleanup operation support.

This driver implements the DMA engine API and supports the following
capabilities:
- memcpy
- xor
- memset

The XOR engine can be used by DMA engine clients implemented in the
kernel, one of those clients is the RAID module.  In that case, I
observed 20% improvement in the raid5 write throughput, and 40%
decrease in the CPU utilization when doing array construction, those
results obtained on an 5182 running at 500Mhz.

When enabling the NET DMA client, the performance decreased, so
meanwhile it is recommended to keep this client off.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/Kconfig                 |    8 +
 drivers/dma/Makefile                |    1 +
 drivers/dma/mv_xor.c                | 1364 +++++++++++++++++++++++++++++++++++
 drivers/dma/mv_xor.h                |  183 +++++
 include/asm-arm/plat-orion/mv_xor.h |   28 +
 5 files changed, 1584 insertions(+)
 create mode 100644 drivers/dma/mv_xor.c
 create mode 100644 drivers/dma/mv_xor.h
 create mode 100644 include/asm-arm/plat-orion/mv_xor.h

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index e4dd0065da3..5af8b1cfc1e 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -47,6 +47,14 @@ config FSL_DMA
 	  MPC8560/40, MPC8555, MPC8548 and MPC8641 processors.
 	  The MPC8349, MPC8360 is also supported.
 
+config MV_XOR
+	bool "Marvell XOR engine support"
+	depends on PLAT_ORION
+	select ASYNC_CORE
+	select DMA_ENGINE
+	---help---
+	  Enable support for the Marvell XOR engine.
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index c8036d94590..ee272fd329c 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
 ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
+obj-$(CONFIG_MV_XOR) += mv_xor.o
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
new file mode 100644
index 00000000000..f0c123ce8ae
--- /dev/null
+++ b/drivers/dma/mv_xor.c
@@ -0,0 +1,1364 @@
+/*
+ * offload engine driver for the Marvell XOR engine
+ * Copyright (C) 2007, 2008, Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/async_tx.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <asm/plat-orion/mv_xor.h>
+#include "mv_xor.h"
+
+static void mv_xor_issue_pending(struct dma_chan *chan);
+
+#define to_mv_xor_chan(chan)		\
+	container_of(chan, struct mv_xor_chan, common)
+
+#define to_mv_xor_device(dev)		\
+	container_of(dev, struct mv_xor_device, common)
+
+#define to_mv_xor_slot(tx)		\
+	container_of(tx, struct mv_xor_desc_slot, async_tx)
+
+static void mv_desc_init(struct mv_xor_desc_slot *desc, unsigned long flags)
+{
+	struct mv_xor_desc *hw_desc = desc->hw_desc;
+
+	hw_desc->status = (1 << 31);
+	hw_desc->phy_next_desc = 0;
+	hw_desc->desc_command = (1 << 31);
+}
+
+static u32 mv_desc_get_dest_addr(struct mv_xor_desc_slot *desc)
+{
+	struct mv_xor_desc *hw_desc = desc->hw_desc;
+	return hw_desc->phy_dest_addr;
+}
+
+static u32 mv_desc_get_src_addr(struct mv_xor_desc_slot *desc,
+				int src_idx)
+{
+	struct mv_xor_desc *hw_desc = desc->hw_desc;
+	return hw_desc->phy_src_addr[src_idx];
+}
+
+
+static void mv_desc_set_byte_count(struct mv_xor_desc_slot *desc,
+				   u32 byte_count)
+{
+	struct mv_xor_desc *hw_desc = desc->hw_desc;
+	hw_desc->byte_count = byte_count;
+}
+
+static void mv_desc_set_next_desc(struct mv_xor_desc_slot *desc,
+				  u32 next_desc_addr)
+{
+	struct mv_xor_desc *hw_desc = desc->hw_desc;
+	BUG_ON(hw_desc->phy_next_desc);
+	hw_desc->phy_next_desc = next_desc_addr;
+}
+
+static void mv_desc_clear_next_desc(struct mv_xor_desc_slot *desc)
+{
+	struct mv_xor_desc *hw_desc = desc->hw_desc;
+	hw_desc->phy_next_desc = 0;
+}
+
+static void mv_desc_set_block_fill_val(struct mv_xor_desc_slot *desc, u32 val)
+{
+	desc->value = val;
+}
+
+static void mv_desc_set_dest_addr(struct mv_xor_desc_slot *desc,
+				  dma_addr_t addr)
+{
+	struct mv_xor_desc *hw_desc = desc->hw_desc;
+	hw_desc->phy_dest_addr = addr;
+}
+
+static int mv_chan_memset_slot_count(size_t len)
+{
+	return 1;
+}
+
+#define mv_chan_memcpy_slot_count(c) mv_chan_memset_slot_count(c)
+
+static void mv_desc_set_src_addr(struct mv_xor_desc_slot *desc,
+				 int index, dma_addr_t addr)
+{
+	struct mv_xor_desc *hw_desc = desc->hw_desc;
+	hw_desc->phy_src_addr[index] = addr;
+	if (desc->type == DMA_XOR)
+		hw_desc->desc_command |= (1 << index);
+}
+
+static u32 mv_chan_get_current_desc(struct mv_xor_chan *chan)
+{
+	return __raw_readl(XOR_CURR_DESC(chan));
+}
+
+static void mv_chan_set_next_descriptor(struct mv_xor_chan *chan,
+					u32 next_desc_addr)
+{
+	__raw_writel(next_desc_addr, XOR_NEXT_DESC(chan));
+}
+
+static void mv_chan_set_dest_pointer(struct mv_xor_chan *chan, u32 desc_addr)
+{
+	__raw_writel(desc_addr, XOR_DEST_POINTER(chan));
+}
+
+static void mv_chan_set_block_size(struct mv_xor_chan *chan, u32 block_size)
+{
+	__raw_writel(block_size, XOR_BLOCK_SIZE(chan));
+}
+
+static void mv_chan_set_value(struct mv_xor_chan *chan, u32 value)
+{
+	__raw_writel(value, XOR_INIT_VALUE_LOW(chan));
+	__raw_writel(value, XOR_INIT_VALUE_HIGH(chan));
+}
+
+static void mv_chan_unmask_interrupts(struct mv_xor_chan *chan)
+{
+	u32 val = __raw_readl(XOR_INTR_MASK(chan));
+	val |= XOR_INTR_MASK_VALUE << (chan->idx * 16);
+	__raw_writel(val, XOR_INTR_MASK(chan));
+}
+
+static u32 mv_chan_get_intr_cause(struct mv_xor_chan *chan)
+{
+	u32 intr_cause = __raw_readl(XOR_INTR_CAUSE(chan));
+	intr_cause = (intr_cause >> (chan->idx * 16)) & 0xFFFF;
+	return intr_cause;
+}
+
+static int mv_is_err_intr(u32 intr_cause)
+{
+	if (intr_cause & ((1<<4)|(1<<5)|(1<<6)|(1<<7)|(1<<8)|(1<<9)))
+		return 1;
+
+	return 0;
+}
+
+static void mv_xor_device_clear_eoc_cause(struct mv_xor_chan *chan)
+{
+	u32 val = (1 << (1 + (chan->idx * 16)));
+	dev_dbg(chan->device->common.dev, "%s, val 0x%08x\n", __func__, val);
+	__raw_writel(val, XOR_INTR_CAUSE(chan));
+}
+
+static void mv_xor_device_clear_err_status(struct mv_xor_chan *chan)
+{
+	u32 val = 0xFFFF0000 >> (chan->idx * 16);
+	__raw_writel(val, XOR_INTR_CAUSE(chan));
+}
+
+static int mv_can_chain(struct mv_xor_desc_slot *desc)
+{
+	struct mv_xor_desc_slot *chain_old_tail = list_entry(
+		desc->chain_node.prev, struct mv_xor_desc_slot, chain_node);
+
+	if (chain_old_tail->type != desc->type)
+		return 0;
+	if (desc->type == DMA_MEMSET)
+		return 0;
+
+	return 1;
+}
+
+static void mv_set_mode(struct mv_xor_chan *chan,
+			       enum dma_transaction_type type)
+{
+	u32 op_mode;
+	u32 config = __raw_readl(XOR_CONFIG(chan));
+
+	switch (type) {
+	case DMA_XOR:
+		op_mode = XOR_OPERATION_MODE_XOR;
+		break;
+	case DMA_MEMCPY:
+		op_mode = XOR_OPERATION_MODE_MEMCPY;
+		break;
+	case DMA_MEMSET:
+		op_mode = XOR_OPERATION_MODE_MEMSET;
+		break;
+	default:
+		dev_printk(KERN_ERR, chan->device->common.dev,
+			   "error: unsupported operation %d.\n",
+			   type);
+		BUG();
+		return;
+	}
+
+	config &= ~0x7;
+	config |= op_mode;
+	__raw_writel(config, XOR_CONFIG(chan));
+	chan->current_type = type;
+}
+
+static void mv_chan_activate(struct mv_xor_chan *chan)
+{
+	u32 activation;
+
+	dev_dbg(chan->device->common.dev, " activate chan.\n");
+	activation = __raw_readl(XOR_ACTIVATION(chan));
+	activation |= 0x1;
+	__raw_writel(activation, XOR_ACTIVATION(chan));
+}
+
+static char mv_chan_is_busy(struct mv_xor_chan *chan)
+{
+	u32 state = __raw_readl(XOR_ACTIVATION(chan));
+
+	state = (state >> 4) & 0x3;
+
+	return (state == 1) ? 1 : 0;
+}
+
+static int mv_chan_xor_slot_count(size_t len, int src_cnt)
+{
+	return 1;
+}
+
+/**
+ * mv_xor_free_slots - flags descriptor slots for reuse
+ * @slot: Slot to free
+ * Caller must hold &mv_chan->lock while calling this function
+ */
+static void mv_xor_free_slots(struct mv_xor_chan *mv_chan,
+			      struct mv_xor_desc_slot *slot)
+{
+	dev_dbg(mv_chan->device->common.dev, "%s %d slot %p\n",
+		__func__, __LINE__, slot);
+
+	slot->slots_per_op = 0;
+
+}
+
+/*
+ * mv_xor_start_new_chain - program the engine to operate on new chain headed by
+ * sw_desc
+ * Caller must hold &mv_chan->lock while calling this function
+ */
+static void mv_xor_start_new_chain(struct mv_xor_chan *mv_chan,
+				   struct mv_xor_desc_slot *sw_desc)
+{
+	dev_dbg(mv_chan->device->common.dev, "%s %d: sw_desc %p\n",
+		__func__, __LINE__, sw_desc);
+	if (sw_desc->type != mv_chan->current_type)
+		mv_set_mode(mv_chan, sw_desc->type);
+
+	if (sw_desc->type == DMA_MEMSET) {
+		/* for memset requests we need to program the engine, no
+		 * descriptors used.
+		 */
+		struct mv_xor_desc *hw_desc = sw_desc->hw_desc;
+		mv_chan_set_dest_pointer(mv_chan, hw_desc->phy_dest_addr);
+		mv_chan_set_block_size(mv_chan, sw_desc->unmap_len);
+		mv_chan_set_value(mv_chan, sw_desc->value);
+	} else {
+		/* set the hardware chain */
+		mv_chan_set_next_descriptor(mv_chan, sw_desc->async_tx.phys);
+	}
+	mv_chan->pending += sw_desc->slot_cnt;
+	mv_xor_issue_pending(&mv_chan->common);
+}
+
+static dma_cookie_t
+mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc,
+	struct mv_xor_chan *mv_chan, dma_cookie_t cookie)
+{
+	BUG_ON(desc->async_tx.cookie < 0);
+
+	if (desc->async_tx.cookie > 0) {
+		cookie = desc->async_tx.cookie;
+
+		/* call the callback (must not sleep or submit new
+		 * operations to this channel)
+		 */
+		if (desc->async_tx.callback)
+			desc->async_tx.callback(
+				desc->async_tx.callback_param);
+
+		/* unmap dma addresses
+		 * (unmap_single vs unmap_page?)
+		 */
+		if (desc->group_head && desc->unmap_len) {
+			struct mv_xor_desc_slot *unmap = desc->group_head;
+			struct device *dev =
+				&mv_chan->device->pdev->dev;
+			u32 len = unmap->unmap_len;
+			u32 src_cnt = unmap->unmap_src_cnt;
+			dma_addr_t addr = mv_desc_get_dest_addr(unmap);
+
+			dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+			while (src_cnt--) {
+				addr = mv_desc_get_src_addr(unmap, src_cnt);
+				dma_unmap_page(dev, addr, len, DMA_TO_DEVICE);
+			}
+			desc->group_head = NULL;
+		}
+	}
+
+	/* run dependent operations */
+	async_tx_run_dependencies(&desc->async_tx);
+
+	return cookie;
+}
+
+static int
+mv_xor_clean_completed_slots(struct mv_xor_chan *mv_chan)
+{
+	struct mv_xor_desc_slot *iter, *_iter;
+
+	dev_dbg(mv_chan->device->common.dev, "%s %d\n", __func__, __LINE__);
+	list_for_each_entry_safe(iter, _iter, &mv_chan->completed_slots,
+				 completed_node) {
+
+		if (async_tx_test_ack(&iter->async_tx)) {
+			list_del(&iter->completed_node);
+			mv_xor_free_slots(mv_chan, iter);
+		}
+	}
+	return 0;
+}
+
+static int
+mv_xor_clean_slot(struct mv_xor_desc_slot *desc,
+	struct mv_xor_chan *mv_chan)
+{
+	dev_dbg(mv_chan->device->common.dev, "%s %d: desc %p flags %d\n",
+		__func__, __LINE__, desc, desc->async_tx.flags);
+	list_del(&desc->chain_node);
+	/* the client is allowed to attach dependent operations
+	 * until 'ack' is set
+	 */
+	if (!async_tx_test_ack(&desc->async_tx)) {
+		/* move this slot to the completed_slots */
+		list_add_tail(&desc->completed_node, &mv_chan->completed_slots);
+		return 0;
+	}
+
+	mv_xor_free_slots(mv_chan, desc);
+	return 0;
+}
+
+static void __mv_xor_slot_cleanup(struct mv_xor_chan *mv_chan)
+{
+	struct mv_xor_desc_slot *iter, *_iter;
+	dma_cookie_t cookie = 0;
+	int busy = mv_chan_is_busy(mv_chan);
+	u32 current_desc = mv_chan_get_current_desc(mv_chan);
+	int seen_current = 0;
+
+	dev_dbg(mv_chan->device->common.dev, "%s %d\n", __func__, __LINE__);
+	dev_dbg(mv_chan->device->common.dev, "current_desc %x\n", current_desc);
+	mv_xor_clean_completed_slots(mv_chan);
+
+	/* free completed slots from the chain starting with
+	 * the oldest descriptor
+	 */
+
+	list_for_each_entry_safe(iter, _iter, &mv_chan->chain,
+					chain_node) {
+		prefetch(_iter);
+		prefetch(&_iter->async_tx);
+
+		/* do not advance past the current descriptor loaded into the
+		 * hardware channel, subsequent descriptors are either in
+		 * process or have not been submitted
+		 */
+		if (seen_current)
+			break;
+
+		/* stop the search if we reach the current descriptor and the
+		 * channel is busy
+		 */
+		if (iter->async_tx.phys == current_desc) {
+			seen_current = 1;
+			if (busy)
+				break;
+		}
+
+		cookie = mv_xor_run_tx_complete_actions(iter, mv_chan, cookie);
+
+		if (mv_xor_clean_slot(iter, mv_chan))
+			break;
+	}
+
+	if ((busy == 0) && !list_empty(&mv_chan->chain)) {
+		struct mv_xor_desc_slot *chain_head;
+		chain_head = list_entry(mv_chan->chain.next,
+					struct mv_xor_desc_slot,
+					chain_node);
+
+		mv_xor_start_new_chain(mv_chan, chain_head);
+	}
+
+	if (cookie > 0)
+		mv_chan->completed_cookie = cookie;
+}
+
+static void
+mv_xor_slot_cleanup(struct mv_xor_chan *mv_chan)
+{
+	spin_lock_bh(&mv_chan->lock);
+	__mv_xor_slot_cleanup(mv_chan);
+	spin_unlock_bh(&mv_chan->lock);
+}
+
+static void mv_xor_tasklet(unsigned long data)
+{
+	struct mv_xor_chan *chan = (struct mv_xor_chan *) data;
+	__mv_xor_slot_cleanup(chan);
+}
+
+static struct mv_xor_desc_slot *
+mv_xor_alloc_slots(struct mv_xor_chan *mv_chan, int num_slots,
+		    int slots_per_op)
+{
+	struct mv_xor_desc_slot *iter, *_iter, *alloc_start = NULL;
+	LIST_HEAD(chain);
+	int slots_found, retry = 0;
+
+	/* start search from the last allocated descrtiptor
+	 * if a contiguous allocation can not be found start searching
+	 * from the beginning of the list
+	 */
+retry:
+	slots_found = 0;
+	if (retry == 0)
+		iter = mv_chan->last_used;
+	else
+		iter = list_entry(&mv_chan->all_slots,
+			struct mv_xor_desc_slot,
+			slot_node);
+
+	list_for_each_entry_safe_continue(
+		iter, _iter, &mv_chan->all_slots, slot_node) {
+		prefetch(_iter);
+		prefetch(&_iter->async_tx);
+		if (iter->slots_per_op) {
+			/* give up after finding the first busy slot
+			 * on the second pass through the list
+			 */
+			if (retry)
+				break;
+
+			slots_found = 0;
+			continue;
+		}
+
+		/* start the allocation if the slot is correctly aligned */
+		if (!slots_found++)
+			alloc_start = iter;
+
+		if (slots_found == num_slots) {
+			struct mv_xor_desc_slot *alloc_tail = NULL;
+			struct mv_xor_desc_slot *last_used = NULL;
+			iter = alloc_start;
+			while (num_slots) {
+				int i;
+
+				/* pre-ack all but the last descriptor */
+				async_tx_ack(&iter->async_tx);
+
+				list_add_tail(&iter->chain_node, &chain);
+				alloc_tail = iter;
+				iter->async_tx.cookie = 0;
+				iter->slot_cnt = num_slots;
+				iter->xor_check_result = NULL;
+				for (i = 0; i < slots_per_op; i++) {
+					iter->slots_per_op = slots_per_op - i;
+					last_used = iter;
+					iter = list_entry(iter->slot_node.next,
+						struct mv_xor_desc_slot,
+						slot_node);
+				}
+				num_slots -= slots_per_op;
+			}
+			alloc_tail->group_head = alloc_start;
+			alloc_tail->async_tx.cookie = -EBUSY;
+			list_splice(&chain, &alloc_tail->async_tx.tx_list);
+			mv_chan->last_used = last_used;
+			mv_desc_clear_next_desc(alloc_start);
+			mv_desc_clear_next_desc(alloc_tail);
+			return alloc_tail;
+		}
+	}
+	if (!retry++)
+		goto retry;
+
+	/* try to free some slots if the allocation fails */
+	tasklet_schedule(&mv_chan->irq_tasklet);
+
+	return NULL;
+}
+
+static dma_cookie_t
+mv_desc_assign_cookie(struct mv_xor_chan *mv_chan,
+		      struct mv_xor_desc_slot *desc)
+{
+	dma_cookie_t cookie = mv_chan->common.cookie;
+
+	if (++cookie < 0)
+		cookie = 1;
+	mv_chan->common.cookie = desc->async_tx.cookie = cookie;
+	return cookie;
+}
+
+/************************ DMA engine API functions ****************************/
+static dma_cookie_t
+mv_xor_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct mv_xor_desc_slot *sw_desc = to_mv_xor_slot(tx);
+	struct mv_xor_chan *mv_chan = to_mv_xor_chan(tx->chan);
+	struct mv_xor_desc_slot *grp_start, *old_chain_tail;
+	dma_cookie_t cookie;
+	int new_hw_chain = 1;
+
+	dev_dbg(mv_chan->device->common.dev,
+		"%s sw_desc %p: async_tx %p\n",
+		__func__, sw_desc, &sw_desc->async_tx);
+
+	grp_start = sw_desc->group_head;
+
+	spin_lock_bh(&mv_chan->lock);
+	cookie = mv_desc_assign_cookie(mv_chan, sw_desc);
+
+	if (list_empty(&mv_chan->chain))
+		list_splice_init(&sw_desc->async_tx.tx_list, &mv_chan->chain);
+	else {
+		new_hw_chain = 0;
+
+		old_chain_tail = list_entry(mv_chan->chain.prev,
+					    struct mv_xor_desc_slot,
+					    chain_node);
+		list_splice_init(&grp_start->async_tx.tx_list,
+				 &old_chain_tail->chain_node);
+
+		if (!mv_can_chain(grp_start))
+			goto submit_done;
+
+		dev_dbg(mv_chan->device->common.dev, "Append to last desc %x\n",
+			old_chain_tail->async_tx.phys);
+
+		/* fix up the hardware chain */
+		mv_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys);
+
+		/* if the channel is not busy */
+		if (!mv_chan_is_busy(mv_chan)) {
+			u32 current_desc = mv_chan_get_current_desc(mv_chan);
+			/*
+			 * and the curren desc is the end of the chain before
+			 * the append, then we need to start the channel
+			 */
+			if (current_desc == old_chain_tail->async_tx.phys)
+				new_hw_chain = 1;
+		}
+	}
+
+	if (new_hw_chain)
+		mv_xor_start_new_chain(mv_chan, grp_start);
+
+submit_done:
+	spin_unlock_bh(&mv_chan->lock);
+
+	return cookie;
+}
+
+/* returns the number of allocated descriptors */
+static int mv_xor_alloc_chan_resources(struct dma_chan *chan)
+{
+	char *hw_desc;
+	int idx;
+	struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
+	struct mv_xor_desc_slot *slot = NULL;
+	struct mv_xor_platform_data *plat_data =
+		mv_chan->device->pdev->dev.platform_data;
+	int num_descs_in_pool = plat_data->pool_size/MV_XOR_SLOT_SIZE;
+
+	/* Allocate descriptor slots */
+	idx = mv_chan->slots_allocated;
+	while (idx < num_descs_in_pool) {
+		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+		if (!slot) {
+			printk(KERN_INFO "MV XOR Channel only initialized"
+				" %d descriptor slots", idx);
+			break;
+		}
+		hw_desc = (char *) mv_chan->device->dma_desc_pool_virt;
+		slot->hw_desc = (void *) &hw_desc[idx * MV_XOR_SLOT_SIZE];
+
+		dma_async_tx_descriptor_init(&slot->async_tx, chan);
+		slot->async_tx.tx_submit = mv_xor_tx_submit;
+		INIT_LIST_HEAD(&slot->chain_node);
+		INIT_LIST_HEAD(&slot->slot_node);
+		INIT_LIST_HEAD(&slot->async_tx.tx_list);
+		hw_desc = (char *) mv_chan->device->dma_desc_pool;
+		slot->async_tx.phys =
+			(dma_addr_t) &hw_desc[idx * MV_XOR_SLOT_SIZE];
+		slot->idx = idx++;
+
+		spin_lock_bh(&mv_chan->lock);
+		mv_chan->slots_allocated = idx;
+		list_add_tail(&slot->slot_node, &mv_chan->all_slots);
+		spin_unlock_bh(&mv_chan->lock);
+	}
+
+	if (mv_chan->slots_allocated && !mv_chan->last_used)
+		mv_chan->last_used = list_entry(mv_chan->all_slots.next,
+					struct mv_xor_desc_slot,
+					slot_node);
+
+	dev_dbg(mv_chan->device->common.dev,
+		"allocated %d descriptor slots last_used: %p\n",
+		mv_chan->slots_allocated, mv_chan->last_used);
+
+	return mv_chan->slots_allocated ? : -ENOMEM;
+}
+
+static struct dma_async_tx_descriptor *
+mv_xor_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags)
+{
+	struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
+	struct mv_xor_desc_slot *sw_desc, *grp_start;
+	int slot_cnt;
+
+	dev_dbg(mv_chan->device->common.dev,
+		"%s dest: %x src %x len: %u flags: %ld\n",
+		__func__, dest, src, len, flags);
+	if (unlikely(len < MV_XOR_MIN_BYTE_COUNT))
+		return NULL;
+
+	BUG_ON(unlikely(len > MV_XOR_MAX_BYTE_COUNT));
+
+	spin_lock_bh(&mv_chan->lock);
+	slot_cnt = mv_chan_memcpy_slot_count(len);
+	sw_desc = mv_xor_alloc_slots(mv_chan, slot_cnt, 1);
+	if (sw_desc) {
+		sw_desc->type = DMA_MEMCPY;
+		sw_desc->async_tx.flags = flags;
+		grp_start = sw_desc->group_head;
+		mv_desc_init(grp_start, flags);
+		mv_desc_set_byte_count(grp_start, len);
+		mv_desc_set_dest_addr(sw_desc->group_head, dest);
+		mv_desc_set_src_addr(grp_start, 0, src);
+		sw_desc->unmap_src_cnt = 1;
+		sw_desc->unmap_len = len;
+	}
+	spin_unlock_bh(&mv_chan->lock);
+
+	dev_dbg(mv_chan->device->common.dev,
+		"%s sw_desc %p async_tx %p\n",
+		__func__, sw_desc, sw_desc ? &sw_desc->async_tx : 0);
+
+	return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+static struct dma_async_tx_descriptor *
+mv_xor_prep_dma_memset(struct dma_chan *chan, dma_addr_t dest, int value,
+		       size_t len, unsigned long flags)
+{
+	struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
+	struct mv_xor_desc_slot *sw_desc, *grp_start;
+	int slot_cnt;
+
+	dev_dbg(mv_chan->device->common.dev,
+		"%s dest: %x len: %u flags: %ld\n",
+		__func__, dest, len, flags);
+	if (unlikely(len < MV_XOR_MIN_BYTE_COUNT))
+		return NULL;
+
+	BUG_ON(unlikely(len > MV_XOR_MAX_BYTE_COUNT));
+
+	spin_lock_bh(&mv_chan->lock);
+	slot_cnt = mv_chan_memset_slot_count(len);
+	sw_desc = mv_xor_alloc_slots(mv_chan, slot_cnt, 1);
+	if (sw_desc) {
+		sw_desc->type = DMA_MEMSET;
+		sw_desc->async_tx.flags = flags;
+		grp_start = sw_desc->group_head;
+		mv_desc_init(grp_start, flags);
+		mv_desc_set_byte_count(grp_start, len);
+		mv_desc_set_dest_addr(sw_desc->group_head, dest);
+		mv_desc_set_block_fill_val(grp_start, value);
+		sw_desc->unmap_src_cnt = 1;
+		sw_desc->unmap_len = len;
+	}
+	spin_unlock_bh(&mv_chan->lock);
+	dev_dbg(mv_chan->device->common.dev,
+		"%s sw_desc %p async_tx %p \n",
+		__func__, sw_desc, &sw_desc->async_tx);
+	return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+static struct dma_async_tx_descriptor *
+mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
+		    unsigned int src_cnt, size_t len, unsigned long flags)
+{
+	struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
+	struct mv_xor_desc_slot *sw_desc, *grp_start;
+	int slot_cnt;
+
+	if (unlikely(len < MV_XOR_MIN_BYTE_COUNT))
+		return NULL;
+
+	BUG_ON(unlikely(len > MV_XOR_MAX_BYTE_COUNT));
+
+	dev_dbg(mv_chan->device->common.dev,
+		"%s src_cnt: %d len: dest %x %u flags: %ld\n",
+		__func__, src_cnt, len, dest, flags);
+
+	spin_lock_bh(&mv_chan->lock);
+	slot_cnt = mv_chan_xor_slot_count(len, src_cnt);
+	sw_desc = mv_xor_alloc_slots(mv_chan, slot_cnt, 1);
+	if (sw_desc) {
+		sw_desc->type = DMA_XOR;
+		sw_desc->async_tx.flags = flags;
+		grp_start = sw_desc->group_head;
+		mv_desc_init(grp_start, flags);
+		/* the byte count field is the same as in memcpy desc*/
+		mv_desc_set_byte_count(grp_start, len);
+		mv_desc_set_dest_addr(sw_desc->group_head, dest);
+		sw_desc->unmap_src_cnt = src_cnt;
+		sw_desc->unmap_len = len;
+		while (src_cnt--)
+			mv_desc_set_src_addr(grp_start, src_cnt, src[src_cnt]);
+	}
+	spin_unlock_bh(&mv_chan->lock);
+	dev_dbg(mv_chan->device->common.dev,
+		"%s sw_desc %p async_tx %p \n",
+		__func__, sw_desc, &sw_desc->async_tx);
+	return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+static void mv_xor_free_chan_resources(struct dma_chan *chan)
+{
+	struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
+	struct mv_xor_desc_slot *iter, *_iter;
+	int in_use_descs = 0;
+
+	mv_xor_slot_cleanup(mv_chan);
+
+	spin_lock_bh(&mv_chan->lock);
+	list_for_each_entry_safe(iter, _iter, &mv_chan->chain,
+					chain_node) {
+		in_use_descs++;
+		list_del(&iter->chain_node);
+	}
+	list_for_each_entry_safe(iter, _iter, &mv_chan->completed_slots,
+				 completed_node) {
+		in_use_descs++;
+		list_del(&iter->completed_node);
+	}
+	list_for_each_entry_safe_reverse(
+		iter, _iter, &mv_chan->all_slots, slot_node) {
+		list_del(&iter->slot_node);
+		kfree(iter);
+		mv_chan->slots_allocated--;
+	}
+	mv_chan->last_used = NULL;
+
+	dev_dbg(mv_chan->device->common.dev, "%s slots_allocated %d\n",
+		__func__, mv_chan->slots_allocated);
+	spin_unlock_bh(&mv_chan->lock);
+
+	if (in_use_descs)
+		dev_err(mv_chan->device->common.dev,
+			"freeing %d in use descriptors!\n", in_use_descs);
+}
+
+/**
+ * mv_xor_is_complete - poll the status of an XOR transaction
+ * @chan: XOR channel handle
+ * @cookie: XOR transaction identifier
+ */
+static enum dma_status mv_xor_is_complete(struct dma_chan *chan,
+					  dma_cookie_t cookie,
+					  dma_cookie_t *done,
+					  dma_cookie_t *used)
+{
+	struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
+	dma_cookie_t last_used;
+	dma_cookie_t last_complete;
+	enum dma_status ret;
+
+	last_used = chan->cookie;
+	last_complete = mv_chan->completed_cookie;
+	mv_chan->is_complete_cookie = cookie;
+	if (done)
+		*done = last_complete;
+	if (used)
+		*used = last_used;
+
+	ret = dma_async_is_complete(cookie, last_complete, last_used);
+	if (ret == DMA_SUCCESS) {
+		mv_xor_clean_completed_slots(mv_chan);
+		return ret;
+	}
+	mv_xor_slot_cleanup(mv_chan);
+
+	last_used = chan->cookie;
+	last_complete = mv_chan->completed_cookie;
+
+	if (done)
+		*done = last_complete;
+	if (used)
+		*used = last_used;
+
+	return dma_async_is_complete(cookie, last_complete, last_used);
+}
+
+static void mv_dump_xor_regs(struct mv_xor_chan *chan)
+{
+	u32 val;
+
+	val = __raw_readl(XOR_CONFIG(chan));
+	dev_printk(KERN_ERR, chan->device->common.dev,
+		   "config       0x%08x.\n", val);
+
+	val = __raw_readl(XOR_ACTIVATION(chan));
+	dev_printk(KERN_ERR, chan->device->common.dev,
+		   "activation   0x%08x.\n", val);
+
+	val = __raw_readl(XOR_INTR_CAUSE(chan));
+	dev_printk(KERN_ERR, chan->device->common.dev,
+		   "intr cause   0x%08x.\n", val);
+
+	val = __raw_readl(XOR_INTR_MASK(chan));
+	dev_printk(KERN_ERR, chan->device->common.dev,
+		   "intr mask    0x%08x.\n", val);
+
+	val = __raw_readl(XOR_ERROR_CAUSE(chan));
+	dev_printk(KERN_ERR, chan->device->common.dev,
+		   "error cause  0x%08x.\n", val);
+
+	val = __raw_readl(XOR_ERROR_ADDR(chan));
+	dev_printk(KERN_ERR, chan->device->common.dev,
+		   "error addr   0x%08x.\n", val);
+}
+
+static void mv_xor_err_interrupt_handler(struct mv_xor_chan *chan,
+					 u32 intr_cause)
+{
+	if (intr_cause & (1 << 4)) {
+	     dev_dbg(chan->device->common.dev,
+		     "ignore this error\n");
+	     return;
+	}
+
+	dev_printk(KERN_ERR, chan->device->common.dev,
+		   "error on chan %d. intr cause 0x%08x.\n",
+		   chan->idx, intr_cause);
+
+	mv_dump_xor_regs(chan);
+	BUG();
+}
+
+static irqreturn_t mv_xor_interrupt_handler(int irq, void *data)
+{
+	struct mv_xor_chan *chan = data;
+	u32 intr_cause = mv_chan_get_intr_cause(chan);
+
+	dev_dbg(chan->device->common.dev, "intr cause %x\n", intr_cause);
+
+	if (mv_is_err_intr(intr_cause))
+		mv_xor_err_interrupt_handler(chan, intr_cause);
+
+	tasklet_schedule(&chan->irq_tasklet);
+
+	mv_xor_device_clear_eoc_cause(chan);
+
+	return IRQ_HANDLED;
+}
+
+static void mv_xor_issue_pending(struct dma_chan *chan)
+{
+	struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
+
+	if (mv_chan->pending >= MV_XOR_THRESHOLD) {
+		mv_chan->pending = 0;
+		mv_chan_activate(mv_chan);
+	}
+}
+
+/*
+ * Perform a transaction to verify the HW works.
+ */
+#define MV_XOR_TEST_SIZE 2000
+
+static int __devinit mv_xor_memcpy_self_test(struct mv_xor_device *device)
+{
+	int i;
+	void *src, *dest;
+	dma_addr_t src_dma, dest_dma;
+	struct dma_chan *dma_chan;
+	dma_cookie_t cookie;
+	struct dma_async_tx_descriptor *tx;
+	int err = 0;
+	struct mv_xor_chan *mv_chan;
+
+	src = kmalloc(sizeof(u8) * MV_XOR_TEST_SIZE, GFP_KERNEL);
+	if (!src)
+		return -ENOMEM;
+
+	dest = kzalloc(sizeof(u8) * MV_XOR_TEST_SIZE, GFP_KERNEL);
+	if (!dest) {
+		kfree(src);
+		return -ENOMEM;
+	}
+
+	/* Fill in src buffer */
+	for (i = 0; i < MV_XOR_TEST_SIZE; i++)
+		((u8 *) src)[i] = (u8)i;
+
+	/* Start copy, using first DMA channel */
+	dma_chan = container_of(device->common.channels.next,
+				struct dma_chan,
+				device_node);
+	if (mv_xor_alloc_chan_resources(dma_chan) < 1) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	dest_dma = dma_map_single(dma_chan->device->dev, dest,
+				  MV_XOR_TEST_SIZE, DMA_FROM_DEVICE);
+
+	src_dma = dma_map_single(dma_chan->device->dev, src,
+				 MV_XOR_TEST_SIZE, DMA_TO_DEVICE);
+
+	tx = mv_xor_prep_dma_memcpy(dma_chan, dest_dma, src_dma,
+				    MV_XOR_TEST_SIZE, 0);
+	cookie = mv_xor_tx_submit(tx);
+	mv_xor_issue_pending(dma_chan);
+	async_tx_ack(tx);
+	msleep(1);
+
+	if (mv_xor_is_complete(dma_chan, cookie, NULL, NULL) !=
+	    DMA_SUCCESS) {
+		dev_printk(KERN_ERR, dma_chan->device->dev,
+			   "Self-test copy timed out, disabling\n");
+		err = -ENODEV;
+		goto free_resources;
+	}
+
+	mv_chan = to_mv_xor_chan(dma_chan);
+	dma_sync_single_for_cpu(&mv_chan->device->pdev->dev, dest_dma,
+				MV_XOR_TEST_SIZE, DMA_FROM_DEVICE);
+	if (memcmp(src, dest, MV_XOR_TEST_SIZE)) {
+		dev_printk(KERN_ERR, dma_chan->device->dev,
+			   "Self-test copy failed compare, disabling\n");
+		err = -ENODEV;
+		goto free_resources;
+	}
+
+free_resources:
+	mv_xor_free_chan_resources(dma_chan);
+out:
+	kfree(src);
+	kfree(dest);
+	return err;
+}
+
+#define MV_XOR_NUM_SRC_TEST 4 /* must be <= 15 */
+static int __devinit
+mv_xor_xor_self_test(struct mv_xor_device *device)
+{
+	int i, src_idx;
+	struct page *dest;
+	struct page *xor_srcs[MV_XOR_NUM_SRC_TEST];
+	dma_addr_t dma_srcs[MV_XOR_NUM_SRC_TEST];
+	dma_addr_t dest_dma;
+	struct dma_async_tx_descriptor *tx;
+	struct dma_chan *dma_chan;
+	dma_cookie_t cookie;
+	u8 cmp_byte = 0;
+	u32 cmp_word;
+	int err = 0;
+	struct mv_xor_chan *mv_chan;
+
+	for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
+		xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
+		if (!xor_srcs[src_idx])
+			while (src_idx--) {
+				__free_page(xor_srcs[src_idx]);
+				return -ENOMEM;
+			}
+	}
+
+	dest = alloc_page(GFP_KERNEL);
+	if (!dest)
+		while (src_idx--) {
+			__free_page(xor_srcs[src_idx]);
+			return -ENOMEM;
+		}
+
+	/* Fill in src buffers */
+	for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
+		u8 *ptr = page_address(xor_srcs[src_idx]);
+		for (i = 0; i < PAGE_SIZE; i++)
+			ptr[i] = (1 << src_idx);
+	}
+
+	for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++)
+		cmp_byte ^= (u8) (1 << src_idx);
+
+	cmp_word = (cmp_byte << 24) | (cmp_byte << 16) |
+		(cmp_byte << 8) | cmp_byte;
+
+	memset(page_address(dest), 0, PAGE_SIZE);
+
+	dma_chan = container_of(device->common.channels.next,
+				struct dma_chan,
+				device_node);
+	if (mv_xor_alloc_chan_resources(dma_chan) < 1) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	/* test xor */
+	dest_dma = dma_map_page(dma_chan->device->dev, dest, 0, PAGE_SIZE,
+				DMA_FROM_DEVICE);
+
+	for (i = 0; i < MV_XOR_NUM_SRC_TEST; i++)
+		dma_srcs[i] = dma_map_page(dma_chan->device->dev, xor_srcs[i],
+					   0, PAGE_SIZE, DMA_TO_DEVICE);
+
+	tx = mv_xor_prep_dma_xor(dma_chan, dest_dma, dma_srcs,
+				 MV_XOR_NUM_SRC_TEST, PAGE_SIZE, 0);
+
+	cookie = mv_xor_tx_submit(tx);
+	mv_xor_issue_pending(dma_chan);
+	async_tx_ack(tx);
+	msleep(8);
+
+	if (mv_xor_is_complete(dma_chan, cookie, NULL, NULL) !=
+	    DMA_SUCCESS) {
+		dev_printk(KERN_ERR, dma_chan->device->dev,
+			   "Self-test xor timed out, disabling\n");
+		err = -ENODEV;
+		goto free_resources;
+	}
+
+	mv_chan = to_mv_xor_chan(dma_chan);
+	dma_sync_single_for_cpu(&mv_chan->device->pdev->dev, dest_dma,
+				PAGE_SIZE, DMA_FROM_DEVICE);
+	for (i = 0; i < (PAGE_SIZE / sizeof(u32)); i++) {
+		u32 *ptr = page_address(dest);
+		if (ptr[i] != cmp_word) {
+			dev_printk(KERN_ERR, dma_chan->device->dev,
+				   "Self-test xor failed compare, disabling."
+				   " index %d, data %x, expected %x\n", i,
+				   ptr[i], cmp_word);
+			err = -ENODEV;
+			goto free_resources;
+		}
+	}
+
+free_resources:
+	mv_xor_free_chan_resources(dma_chan);
+out:
+	src_idx = MV_XOR_NUM_SRC_TEST;
+	while (src_idx--)
+		__free_page(xor_srcs[src_idx]);
+	__free_page(dest);
+	return err;
+}
+
+static int __devexit mv_xor_remove(struct platform_device *dev)
+{
+	struct mv_xor_device *device = platform_get_drvdata(dev);
+	struct dma_chan *chan, *_chan;
+	struct mv_xor_chan *mv_chan;
+	struct mv_xor_platform_data *plat_data = dev->dev.platform_data;
+
+	dma_async_device_unregister(&device->common);
+
+	dma_free_coherent(&dev->dev, plat_data->pool_size,
+			device->dma_desc_pool_virt, device->dma_desc_pool);
+
+	list_for_each_entry_safe(chan, _chan, &device->common.channels,
+				device_node) {
+		mv_chan = to_mv_xor_chan(chan);
+		list_del(&chan->device_node);
+	}
+
+	return 0;
+}
+
+static int __devinit mv_xor_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	int irq;
+	struct mv_xor_device *adev;
+	struct mv_xor_chan *mv_chan;
+	struct dma_device *dma_dev;
+	struct mv_xor_platform_data *plat_data = pdev->dev.platform_data;
+
+
+	adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
+	if (!adev)
+		return -ENOMEM;
+
+	dma_dev = &adev->common;
+
+	/* allocate coherent memory for hardware descriptors
+	 * note: writecombine gives slightly better performance, but
+	 * requires that we explicitly flush the writes
+	 */
+	adev->dma_desc_pool_virt = dma_alloc_writecombine(&pdev->dev,
+							  plat_data->pool_size,
+							  &adev->dma_desc_pool,
+							  GFP_KERNEL);
+	if (!adev->dma_desc_pool_virt)
+		return -ENOMEM;
+
+	adev->id = plat_data->hw_id;
+
+	/* discover transaction capabilites from the platform data */
+	dma_dev->cap_mask = plat_data->cap_mask;
+	adev->pdev = pdev;
+	platform_set_drvdata(pdev, adev);
+
+	adev->shared = platform_get_drvdata(plat_data->shared);
+
+	INIT_LIST_HEAD(&dma_dev->channels);
+
+	/* set base routines */
+	dma_dev->device_alloc_chan_resources = mv_xor_alloc_chan_resources;
+	dma_dev->device_free_chan_resources = mv_xor_free_chan_resources;
+	dma_dev->device_is_tx_complete = mv_xor_is_complete;
+	dma_dev->device_issue_pending = mv_xor_issue_pending;
+	dma_dev->dev = &pdev->dev;
+
+	/* set prep routines based on capability */
+	if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask))
+		dma_dev->device_prep_dma_memcpy = mv_xor_prep_dma_memcpy;
+	if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask))
+		dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset;
+	if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
+		dma_dev->max_xor = 8;                  ;
+		dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor;
+	}
+
+	mv_chan = devm_kzalloc(&pdev->dev, sizeof(*mv_chan), GFP_KERNEL);
+	if (!mv_chan) {
+		ret = -ENOMEM;
+		goto err_free_dma;
+	}
+	mv_chan->device = adev;
+	mv_chan->idx = plat_data->hw_id;
+	mv_chan->mmr_base = adev->shared->xor_base;
+
+	if (!mv_chan->mmr_base) {
+		ret = -ENOMEM;
+		goto err_free_dma;
+	}
+	tasklet_init(&mv_chan->irq_tasklet, mv_xor_tasklet, (unsigned long)
+		     mv_chan);
+
+	/* clear errors before enabling interrupts */
+	mv_xor_device_clear_err_status(mv_chan);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err_free_dma;
+	}
+	ret = devm_request_irq(&pdev->dev, irq,
+			       mv_xor_interrupt_handler,
+			       0, dev_name(&pdev->dev), mv_chan);
+	if (ret)
+		goto err_free_dma;
+
+	mv_chan_unmask_interrupts(mv_chan);
+
+	mv_set_mode(mv_chan, DMA_MEMCPY);
+
+	spin_lock_init(&mv_chan->lock);
+	INIT_LIST_HEAD(&mv_chan->chain);
+	INIT_LIST_HEAD(&mv_chan->completed_slots);
+	INIT_LIST_HEAD(&mv_chan->all_slots);
+	INIT_RCU_HEAD(&mv_chan->common.rcu);
+	mv_chan->common.device = dma_dev;
+
+	list_add_tail(&mv_chan->common.device_node, &dma_dev->channels);
+
+	if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
+		ret = mv_xor_memcpy_self_test(adev);
+		dev_dbg(&pdev->dev, "memcpy self test returned %d\n", ret);
+		if (ret)
+			goto err_free_dma;
+	}
+
+	if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
+		ret = mv_xor_xor_self_test(adev);
+		dev_dbg(&pdev->dev, "xor self test returned %d\n", ret);
+		if (ret)
+			goto err_free_dma;
+	}
+
+	dev_printk(KERN_INFO, &pdev->dev, "Marvell XOR: "
+	  "( %s%s%s%s)\n",
+	  dma_has_cap(DMA_XOR, dma_dev->cap_mask) ? "xor " : "",
+	  dma_has_cap(DMA_MEMSET, dma_dev->cap_mask)  ? "fill " : "",
+	  dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask) ? "cpy " : "",
+	  dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask) ? "intr " : "");
+
+	dma_async_device_register(dma_dev);
+	goto out;
+
+ err_free_dma:
+	dma_free_coherent(&adev->pdev->dev, plat_data->pool_size,
+			adev->dma_desc_pool_virt, adev->dma_desc_pool);
+ out:
+	return ret;
+}
+
+static void
+mv_xor_conf_mbus_windows(struct mv_xor_shared_private *msp,
+			 struct mbus_dram_target_info *dram)
+{
+	void __iomem *base = msp->xor_base;
+	u32 win_enable = 0;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		writel(0, base + WINDOW_BASE(i));
+		writel(0, base + WINDOW_SIZE(i));
+		if (i < 4)
+			writel(0, base + WINDOW_REMAP_HIGH(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		struct mbus_dram_window *cs = dram->cs + i;
+
+		writel((cs->base & 0xffff0000) |
+		       (cs->mbus_attr << 8) |
+		       dram->mbus_dram_target_id, base + WINDOW_BASE(i));
+		writel((cs->size - 1) & 0xffff0000, base + WINDOW_SIZE(i));
+
+		win_enable |= (1 << i);
+		win_enable |= 3 << (16 + (2 * i));
+	}
+
+	writel(win_enable, base + WINDOW_BAR_ENABLE(0));
+	writel(win_enable, base + WINDOW_BAR_ENABLE(1));
+}
+
+static struct platform_driver mv_xor_driver = {
+	.probe		= mv_xor_probe,
+	.remove		= mv_xor_remove,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= MV_XOR_NAME,
+	},
+};
+
+static int mv_xor_shared_probe(struct platform_device *pdev)
+{
+	struct mv_xor_platform_shared_data *msd = pdev->dev.platform_data;
+	struct mv_xor_shared_private *msp;
+	struct resource *res;
+
+	dev_printk(KERN_NOTICE, &pdev->dev, "Marvell shared XOR driver\n");
+
+	msp = devm_kzalloc(&pdev->dev, sizeof(*msp), GFP_KERNEL);
+	if (!msp)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	msp->xor_base = devm_ioremap(&pdev->dev, res->start,
+				     res->end - res->start + 1);
+	if (!msp->xor_base)
+		return -EBUSY;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res)
+		return -ENODEV;
+
+	msp->xor_high_base = devm_ioremap(&pdev->dev, res->start,
+					  res->end - res->start + 1);
+	if (!msp->xor_high_base)
+		return -EBUSY;
+
+	platform_set_drvdata(pdev, msp);
+
+	/*
+	 * (Re-)program MBUS remapping windows if we are asked to.
+	 */
+	if (msd != NULL && msd->dram != NULL)
+		mv_xor_conf_mbus_windows(msp, msd->dram);
+
+	return 0;
+}
+
+static int mv_xor_shared_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver mv_xor_shared_driver = {
+	.probe		= mv_xor_shared_probe,
+	.remove		= mv_xor_shared_remove,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= MV_XOR_SHARED_NAME,
+	},
+};
+
+
+static int __init mv_xor_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&mv_xor_shared_driver);
+	if (!rc) {
+		rc = platform_driver_register(&mv_xor_driver);
+		if (rc)
+			platform_driver_unregister(&mv_xor_shared_driver);
+	}
+	return rc;
+}
+module_init(mv_xor_init);
+
+/* it's currently unsafe to unload this module */
+#if 0
+static void __exit mv_xor_exit(void)
+{
+	platform_driver_unregister(&mv_xor_driver);
+	platform_driver_unregister(&mv_xor_shared_driver);
+	return;
+}
+
+module_exit(mv_xor_exit);
+#endif
+
+MODULE_AUTHOR("Saeed Bishara <saeed@marvell.com>");
+MODULE_DESCRIPTION("DMA engine driver for Marvell's XOR engine");
+MODULE_LICENSE("GPL");
diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h
new file mode 100644
index 00000000000..06cafe1ef52
--- /dev/null
+++ b/drivers/dma/mv_xor.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2007, 2008, Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef MV_XOR_H
+#define MV_XOR_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
+#define USE_TIMER
+#define MV_XOR_SLOT_SIZE		64
+#define MV_XOR_THRESHOLD		1
+
+#define XOR_OPERATION_MODE_XOR		0
+#define XOR_OPERATION_MODE_MEMCPY	2
+#define XOR_OPERATION_MODE_MEMSET	4
+
+#define XOR_CURR_DESC(chan)	(chan->mmr_base + 0x210 + (chan->idx * 4))
+#define XOR_NEXT_DESC(chan)	(chan->mmr_base + 0x200 + (chan->idx * 4))
+#define XOR_BYTE_COUNT(chan)	(chan->mmr_base + 0x220 + (chan->idx * 4))
+#define XOR_DEST_POINTER(chan)	(chan->mmr_base + 0x2B0 + (chan->idx * 4))
+#define XOR_BLOCK_SIZE(chan)	(chan->mmr_base + 0x2C0 + (chan->idx * 4))
+#define XOR_INIT_VALUE_LOW(chan)	(chan->mmr_base + 0x2E0)
+#define XOR_INIT_VALUE_HIGH(chan)	(chan->mmr_base + 0x2E4)
+
+#define XOR_CONFIG(chan)	(chan->mmr_base + 0x10 + (chan->idx * 4))
+#define XOR_ACTIVATION(chan)	(chan->mmr_base + 0x20 + (chan->idx * 4))
+#define XOR_INTR_CAUSE(chan)	(chan->mmr_base + 0x30)
+#define XOR_INTR_MASK(chan)	(chan->mmr_base + 0x40)
+#define XOR_ERROR_CAUSE(chan)	(chan->mmr_base + 0x50)
+#define XOR_ERROR_ADDR(chan)	(chan->mmr_base + 0x60)
+#define XOR_INTR_MASK_VALUE	0x3F5
+
+#define WINDOW_BASE(w)		(0x250 + ((w) << 2))
+#define WINDOW_SIZE(w)		(0x270 + ((w) << 2))
+#define WINDOW_REMAP_HIGH(w)	(0x290 + ((w) << 2))
+#define WINDOW_BAR_ENABLE(chan)	(0x240 + ((chan) << 2))
+
+struct mv_xor_shared_private {
+	void __iomem	*xor_base;
+	void __iomem	*xor_high_base;
+};
+
+
+/**
+ * struct mv_xor_device - internal representation of a XOR device
+ * @pdev: Platform device
+ * @id: HW XOR Device selector
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @dma_desc_pool_virt: base of DMA descriptor region (CPU address)
+ * @common: embedded struct dma_device
+ */
+struct mv_xor_device {
+	struct platform_device		*pdev;
+	int				id;
+	dma_addr_t			dma_desc_pool;
+	void				*dma_desc_pool_virt;
+	struct dma_device		common;
+	struct mv_xor_shared_private	*shared;
+};
+
+/**
+ * struct mv_xor_chan - internal representation of a XOR channel
+ * @pending: allows batching of hardware operations
+ * @completed_cookie: identifier for the most recently completed operation
+ * @lock: serializes enqueue/dequeue operations to the descriptors pool
+ * @mmr_base: memory mapped register base
+ * @idx: the index of the xor channel
+ * @chain: device chain view of the descriptors
+ * @completed_slots: slots completed by HW but still need to be acked
+ * @device: parent device
+ * @common: common dmaengine channel object members
+ * @last_used: place holder for allocation to continue from where it left off
+ * @all_slots: complete domain of slots usable by the channel
+ * @slots_allocated: records the actual size of the descriptor slot pool
+ * @irq_tasklet: bottom half where mv_xor_slot_cleanup runs
+ */
+struct mv_xor_chan {
+	int			pending;
+	dma_cookie_t		completed_cookie;
+	spinlock_t		lock; /* protects the descriptor slot pool */
+	void __iomem		*mmr_base;
+	unsigned int		idx;
+	enum dma_transaction_type	current_type;
+	struct list_head	chain;
+	struct list_head	completed_slots;
+	struct mv_xor_device	*device;
+	struct dma_chan		common;
+	struct mv_xor_desc_slot	*last_used;
+	struct list_head	all_slots;
+	int			slots_allocated;
+	struct tasklet_struct	irq_tasklet;
+#ifdef USE_TIMER
+	unsigned long		cleanup_time;
+	u32			current_on_last_cleanup;
+	dma_cookie_t		is_complete_cookie;
+#endif
+};
+
+/**
+ * struct mv_xor_desc_slot - software descriptor
+ * @slot_node: node on the mv_xor_chan.all_slots list
+ * @chain_node: node on the mv_xor_chan.chain list
+ * @completed_node: node on the mv_xor_chan.completed_slots list
+ * @hw_desc: virtual address of the hardware descriptor chain
+ * @phys: hardware address of the hardware descriptor chain
+ * @group_head: first operation in a transaction
+ * @slot_cnt: total slots used in an transaction (group of operations)
+ * @slots_per_op: number of slots per operation
+ * @idx: pool index
+ * @unmap_src_cnt: number of xor sources
+ * @unmap_len: transaction bytecount
+ * @async_tx: support for the async_tx api
+ * @group_list: list of slots that make up a multi-descriptor transaction
+ *	for example transfer lengths larger than the supported hw max
+ * @xor_check_result: result of zero sum
+ * @crc32_result: result crc calculation
+ */
+struct mv_xor_desc_slot {
+	struct list_head	slot_node;
+	struct list_head	chain_node;
+	struct list_head	completed_node;
+	enum dma_transaction_type	type;
+	void			*hw_desc;
+	struct mv_xor_desc_slot	*group_head;
+	u16			slot_cnt;
+	u16			slots_per_op;
+	u16			idx;
+	u16			unmap_src_cnt;
+	u32			value;
+	size_t			unmap_len;
+	struct dma_async_tx_descriptor	async_tx;
+	union {
+		u32		*xor_check_result;
+		u32		*crc32_result;
+	};
+#ifdef USE_TIMER
+	unsigned long		arrival_time;
+	struct timer_list	timeout;
+#endif
+};
+
+/* This structure describes XOR descriptor size 64bytes	*/
+struct mv_xor_desc {
+	u32 status;		/* descriptor execution status */
+	u32 crc32_result;	/* result of CRC-32 calculation */
+	u32 desc_command;	/* type of operation to be carried out */
+	u32 phy_next_desc;	/* next descriptor address pointer */
+	u32 byte_count;		/* size of src/dst blocks in bytes */
+	u32 phy_dest_addr;	/* destination block address */
+	u32 phy_src_addr[8];	/* source block addresses */
+	u32 reserved0;
+	u32 reserved1;
+};
+
+#define to_mv_sw_desc(addr_hw_desc)		\
+	container_of(addr_hw_desc, struct mv_xor_desc_slot, hw_desc)
+
+#define mv_hw_desc_slot_idx(hw_desc, idx)	\
+	((void *)(((unsigned long)hw_desc) + ((idx) << 5)))
+
+#define MV_XOR_MIN_BYTE_COUNT	(128)
+#define XOR_MAX_BYTE_COUNT	((16 * 1024 * 1024) - 1)
+#define MV_XOR_MAX_BYTE_COUNT	XOR_MAX_BYTE_COUNT
+
+
+#endif
diff --git a/include/asm-arm/plat-orion/mv_xor.h b/include/asm-arm/plat-orion/mv_xor.h
new file mode 100644
index 00000000000..c349e8ff5cc
--- /dev/null
+++ b/include/asm-arm/plat-orion/mv_xor.h
@@ -0,0 +1,28 @@
+/*
+ * Marvell XOR platform device data definition file.
+ */
+
+#ifndef __ASM_PLAT_ORION_MV_XOR_H
+#define __ASM_PLAT_ORION_MV_XOR_H
+
+#include <linux/dmaengine.h>
+#include <linux/mbus.h>
+
+#define MV_XOR_SHARED_NAME	"mv_xor_shared"
+#define MV_XOR_NAME		"mv_xor"
+
+struct mbus_dram_target_info;
+
+struct mv_xor_platform_shared_data {
+	struct mbus_dram_target_info	*dram;
+};
+
+struct mv_xor_platform_data {
+	struct platform_device		*shared;
+	int				hw_id;
+	dma_cap_mask_t			cap_mask;
+	size_t				pool_size;
+};
+
+
+#endif
-- 
cgit v1.2.3


From 4a776f0aa922a552460192c07b56f4fe9cd82632 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Tue, 8 Jul 2008 11:58:45 -0700
Subject: dmatest: Simple DMA memcpy test client

This client tests DMA memcpy using various lengths and various offsets
into the source and destination buffers. It will initialize both
buffers with a repeatable pattern and verify that the DMA engine copies
the requested region and nothing more. It will also verify that the
bytes aren't swapped around, and that the source buffer isn't modified.

The dmatest module can be configured to test a specific device, a
specific channel. It can also test multiple channels at the same time,
and it can start multiple threads competing for the same channel.

Changes since v2:
  * Support testing multiple channels at the same time
  * Support testing with multiple threads competing for the same channel
  * Use counting test patterns in order to catch byte ordering issues

Changes since v1:
  * Remove extra dashes around "help"
  * Remove "default n" from Kconfig
  * Turn TEST_BUF_SIZE into a module parameter
  * Return DMA_NAK instead of DMA_DUP
  * Print unhandled events
  * Support testing specific channels and devices
  * Move to the end of the Makefile

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/Kconfig   |   7 +
 drivers/dma/Makefile  |   1 +
 drivers/dma/dmatest.c | 444 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 452 insertions(+)
 create mode 100644 drivers/dma/dmatest.c

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 5af8b1cfc1e..4b6bd3d099c 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -72,4 +72,11 @@ config NET_DMA
 	  Say Y here if you enabled INTEL_IOATDMA or FSL_DMA, otherwise
 	  say N.
 
+config DMATEST
+	tristate "DMA Test client"
+	depends on DMA_ENGINE
+	help
+	  Simple DMA test client. Say N unless you're debugging a
+	  DMA Device driver.
+
 endif
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index ee272fd329c..181e3646fbf 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
 obj-$(CONFIG_NET_DMA) += iovlock.o
+obj-$(CONFIG_DMATEST) += dmatest.o
 obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
 ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
new file mode 100644
index 00000000000..a08d1970474
--- /dev/null
+++ b/drivers/dma/dmatest.c
@@ -0,0 +1,444 @@
+/*
+ * DMA Engine test module
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/random.h>
+#include <linux/wait.h>
+
+static unsigned int test_buf_size = 16384;
+module_param(test_buf_size, uint, S_IRUGO);
+MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer");
+
+static char test_channel[BUS_ID_SIZE];
+module_param_string(channel, test_channel, sizeof(test_channel), S_IRUGO);
+MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)");
+
+static char test_device[BUS_ID_SIZE];
+module_param_string(device, test_device, sizeof(test_device), S_IRUGO);
+MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)");
+
+static unsigned int threads_per_chan = 1;
+module_param(threads_per_chan, uint, S_IRUGO);
+MODULE_PARM_DESC(threads_per_chan,
+		"Number of threads to start per channel (default: 1)");
+
+static unsigned int max_channels;
+module_param(max_channels, uint, S_IRUGO);
+MODULE_PARM_DESC(nr_channels,
+		"Maximum number of channels to use (default: all)");
+
+/*
+ * Initialization patterns. All bytes in the source buffer has bit 7
+ * set, all bytes in the destination buffer has bit 7 cleared.
+ *
+ * Bit 6 is set for all bytes which are to be copied by the DMA
+ * engine. Bit 5 is set for all bytes which are to be overwritten by
+ * the DMA engine.
+ *
+ * The remaining bits are the inverse of a counter which increments by
+ * one for each byte address.
+ */
+#define PATTERN_SRC		0x80
+#define PATTERN_DST		0x00
+#define PATTERN_COPY		0x40
+#define PATTERN_OVERWRITE	0x20
+#define PATTERN_COUNT_MASK	0x1f
+
+struct dmatest_thread {
+	struct list_head	node;
+	struct task_struct	*task;
+	struct dma_chan		*chan;
+	u8			*srcbuf;
+	u8			*dstbuf;
+};
+
+struct dmatest_chan {
+	struct list_head	node;
+	struct dma_chan		*chan;
+	struct list_head	threads;
+};
+
+/*
+ * These are protected by dma_list_mutex since they're only used by
+ * the DMA client event callback
+ */
+static LIST_HEAD(dmatest_channels);
+static unsigned int nr_channels;
+
+static bool dmatest_match_channel(struct dma_chan *chan)
+{
+	if (test_channel[0] == '\0')
+		return true;
+	return strcmp(chan->dev.bus_id, test_channel) == 0;
+}
+
+static bool dmatest_match_device(struct dma_device *device)
+{
+	if (test_device[0] == '\0')
+		return true;
+	return strcmp(device->dev->bus_id, test_device) == 0;
+}
+
+static unsigned long dmatest_random(void)
+{
+	unsigned long buf;
+
+	get_random_bytes(&buf, sizeof(buf));
+	return buf;
+}
+
+static void dmatest_init_srcbuf(u8 *buf, unsigned int start, unsigned int len)
+{
+	unsigned int i;
+
+	for (i = 0; i < start; i++)
+		buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
+	for ( ; i < start + len; i++)
+		buf[i] = PATTERN_SRC | PATTERN_COPY
+			| (~i & PATTERN_COUNT_MASK);;
+	for ( ; i < test_buf_size; i++)
+		buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
+}
+
+static void dmatest_init_dstbuf(u8 *buf, unsigned int start, unsigned int len)
+{
+	unsigned int i;
+
+	for (i = 0; i < start; i++)
+		buf[i] = PATTERN_DST | (~i & PATTERN_COUNT_MASK);
+	for ( ; i < start + len; i++)
+		buf[i] = PATTERN_DST | PATTERN_OVERWRITE
+			| (~i & PATTERN_COUNT_MASK);
+	for ( ; i < test_buf_size; i++)
+		buf[i] = PATTERN_DST | (~i & PATTERN_COUNT_MASK);
+}
+
+static void dmatest_mismatch(u8 actual, u8 pattern, unsigned int index,
+		unsigned int counter, bool is_srcbuf)
+{
+	u8		diff = actual ^ pattern;
+	u8		expected = pattern | (~counter & PATTERN_COUNT_MASK);
+	const char	*thread_name = current->comm;
+
+	if (is_srcbuf)
+		pr_warning("%s: srcbuf[0x%x] overwritten!"
+				" Expected %02x, got %02x\n",
+				thread_name, index, expected, actual);
+	else if ((pattern & PATTERN_COPY)
+			&& (diff & (PATTERN_COPY | PATTERN_OVERWRITE)))
+		pr_warning("%s: dstbuf[0x%x] not copied!"
+				" Expected %02x, got %02x\n",
+				thread_name, index, expected, actual);
+	else if (diff & PATTERN_SRC)
+		pr_warning("%s: dstbuf[0x%x] was copied!"
+				" Expected %02x, got %02x\n",
+				thread_name, index, expected, actual);
+	else
+		pr_warning("%s: dstbuf[0x%x] mismatch!"
+				" Expected %02x, got %02x\n",
+				thread_name, index, expected, actual);
+}
+
+static unsigned int dmatest_verify(u8 *buf, unsigned int start,
+		unsigned int end, unsigned int counter, u8 pattern,
+		bool is_srcbuf)
+{
+	unsigned int i;
+	unsigned int error_count = 0;
+	u8 actual;
+
+	for (i = start; i < end; i++) {
+		actual = buf[i];
+		if (actual != (pattern | (~counter & PATTERN_COUNT_MASK))) {
+			if (error_count < 32)
+				dmatest_mismatch(actual, pattern, i, counter,
+						is_srcbuf);
+			error_count++;
+		}
+		counter++;
+	}
+
+	if (error_count > 32)
+		pr_warning("%s: %u errors suppressed\n",
+			current->comm, error_count - 32);
+
+	return error_count;
+}
+
+/*
+ * This function repeatedly tests DMA transfers of various lengths and
+ * offsets until it is told to exit by kthread_stop(). There may be
+ * multiple threads running this function in parallel for a single
+ * channel, and there may be multiple channels being tested in
+ * parallel.
+ *
+ * Before each test, the source and destination buffer is initialized
+ * with a known pattern. This pattern is different depending on
+ * whether it's in an area which is supposed to be copied or
+ * overwritten, and different in the source and destination buffers.
+ * So if the DMA engine doesn't copy exactly what we tell it to copy,
+ * we'll notice.
+ */
+static int dmatest_func(void *data)
+{
+	struct dmatest_thread	*thread = data;
+	struct dma_chan		*chan;
+	const char		*thread_name;
+	unsigned int		src_off, dst_off, len;
+	unsigned int		error_count;
+	unsigned int		failed_tests = 0;
+	unsigned int		total_tests = 0;
+	dma_cookie_t		cookie;
+	enum dma_status		status;
+	int			ret;
+
+	thread_name = current->comm;
+
+	ret = -ENOMEM;
+	thread->srcbuf = kmalloc(test_buf_size, GFP_KERNEL);
+	if (!thread->srcbuf)
+		goto err_srcbuf;
+	thread->dstbuf = kmalloc(test_buf_size, GFP_KERNEL);
+	if (!thread->dstbuf)
+		goto err_dstbuf;
+
+	smp_rmb();
+	chan = thread->chan;
+	dma_chan_get(chan);
+
+	while (!kthread_should_stop()) {
+		total_tests++;
+
+		len = dmatest_random() % test_buf_size + 1;
+		src_off = dmatest_random() % (test_buf_size - len + 1);
+		dst_off = dmatest_random() % (test_buf_size - len + 1);
+
+		dmatest_init_srcbuf(thread->srcbuf, src_off, len);
+		dmatest_init_dstbuf(thread->dstbuf, dst_off, len);
+
+		cookie = dma_async_memcpy_buf_to_buf(chan,
+				thread->dstbuf + dst_off,
+				thread->srcbuf + src_off,
+				len);
+		if (dma_submit_error(cookie)) {
+			pr_warning("%s: #%u: submit error %d with src_off=0x%x "
+					"dst_off=0x%x len=0x%x\n",
+					thread_name, total_tests - 1, cookie,
+					src_off, dst_off, len);
+			msleep(100);
+			failed_tests++;
+			continue;
+		}
+		dma_async_memcpy_issue_pending(chan);
+
+		do {
+			msleep(1);
+			status = dma_async_memcpy_complete(
+					chan, cookie, NULL, NULL);
+		} while (status == DMA_IN_PROGRESS);
+
+		if (status == DMA_ERROR) {
+			pr_warning("%s: #%u: error during copy\n",
+					thread_name, total_tests - 1);
+			failed_tests++;
+			continue;
+		}
+
+		error_count = 0;
+
+		pr_debug("%s: verifying source buffer...\n", thread_name);
+		error_count += dmatest_verify(thread->srcbuf, 0, src_off,
+				0, PATTERN_SRC, true);
+		error_count += dmatest_verify(thread->srcbuf, src_off,
+				src_off + len, src_off,
+				PATTERN_SRC | PATTERN_COPY, true);
+		error_count += dmatest_verify(thread->srcbuf, src_off + len,
+				test_buf_size, src_off + len,
+				PATTERN_SRC, true);
+
+		pr_debug("%s: verifying dest buffer...\n",
+				thread->task->comm);
+		error_count += dmatest_verify(thread->dstbuf, 0, dst_off,
+				0, PATTERN_DST, false);
+		error_count += dmatest_verify(thread->dstbuf, dst_off,
+				dst_off + len, src_off,
+				PATTERN_SRC | PATTERN_COPY, false);
+		error_count += dmatest_verify(thread->dstbuf, dst_off + len,
+				test_buf_size, dst_off + len,
+				PATTERN_DST, false);
+
+		if (error_count) {
+			pr_warning("%s: #%u: %u errors with "
+				"src_off=0x%x dst_off=0x%x len=0x%x\n",
+				thread_name, total_tests - 1, error_count,
+				src_off, dst_off, len);
+			failed_tests++;
+		} else {
+			pr_debug("%s: #%u: No errors with "
+				"src_off=0x%x dst_off=0x%x len=0x%x\n",
+				thread_name, total_tests - 1,
+				src_off, dst_off, len);
+		}
+	}
+
+	ret = 0;
+	dma_chan_put(chan);
+	kfree(thread->dstbuf);
+err_dstbuf:
+	kfree(thread->srcbuf);
+err_srcbuf:
+	pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
+			thread_name, total_tests, failed_tests, ret);
+	return ret;
+}
+
+static void dmatest_cleanup_channel(struct dmatest_chan *dtc)
+{
+	struct dmatest_thread	*thread;
+	struct dmatest_thread	*_thread;
+	int			ret;
+
+	list_for_each_entry_safe(thread, _thread, &dtc->threads, node) {
+		ret = kthread_stop(thread->task);
+		pr_debug("dmatest: thread %s exited with status %d\n",
+				thread->task->comm, ret);
+		list_del(&thread->node);
+		kfree(thread);
+	}
+	kfree(dtc);
+}
+
+static enum dma_state_client dmatest_add_channel(struct dma_chan *chan)
+{
+	struct dmatest_chan	*dtc;
+	struct dmatest_thread	*thread;
+	unsigned int		i;
+
+	dtc = kmalloc(sizeof(struct dmatest_chan), GFP_ATOMIC);
+	if (!dtc) {
+		pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id);
+		return DMA_NAK;
+	}
+
+	dtc->chan = chan;
+	INIT_LIST_HEAD(&dtc->threads);
+
+	for (i = 0; i < threads_per_chan; i++) {
+		thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL);
+		if (!thread) {
+			pr_warning("dmatest: No memory for %s-test%u\n",
+					chan->dev.bus_id, i);
+			break;
+		}
+		thread->chan = dtc->chan;
+		smp_wmb();
+		thread->task = kthread_run(dmatest_func, thread, "%s-test%u",
+				chan->dev.bus_id, i);
+		if (IS_ERR(thread->task)) {
+			pr_warning("dmatest: Failed to run thread %s-test%u\n",
+					chan->dev.bus_id, i);
+			kfree(thread);
+			break;
+		}
+
+		/* srcbuf and dstbuf are allocated by the thread itself */
+
+		list_add_tail(&thread->node, &dtc->threads);
+	}
+
+	pr_info("dmatest: Started %u threads using %s\n", i, chan->dev.bus_id);
+
+	list_add_tail(&dtc->node, &dmatest_channels);
+	nr_channels++;
+
+	return DMA_ACK;
+}
+
+static enum dma_state_client dmatest_remove_channel(struct dma_chan *chan)
+{
+	struct dmatest_chan	*dtc, *_dtc;
+
+	list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) {
+		if (dtc->chan == chan) {
+			list_del(&dtc->node);
+			dmatest_cleanup_channel(dtc);
+			pr_debug("dmatest: lost channel %s\n",
+					chan->dev.bus_id);
+			return DMA_ACK;
+		}
+	}
+
+	return DMA_DUP;
+}
+
+/*
+ * Start testing threads as new channels are assigned to us, and kill
+ * them when the channels go away.
+ *
+ * When we unregister the client, all channels are removed so this
+ * will also take care of cleaning things up when the module is
+ * unloaded.
+ */
+static enum dma_state_client
+dmatest_event(struct dma_client *client, struct dma_chan *chan,
+		enum dma_state state)
+{
+	enum dma_state_client	ack = DMA_NAK;
+
+	switch (state) {
+	case DMA_RESOURCE_AVAILABLE:
+		if (!dmatest_match_channel(chan)
+				|| !dmatest_match_device(chan->device))
+			ack = DMA_DUP;
+		else if (max_channels && nr_channels >= max_channels)
+			ack = DMA_NAK;
+		else
+			ack = dmatest_add_channel(chan);
+		break;
+
+	case DMA_RESOURCE_REMOVED:
+		ack = dmatest_remove_channel(chan);
+		break;
+
+	default:
+		pr_info("dmatest: Unhandled event %u (%s)\n",
+				state, chan->dev.bus_id);
+		break;
+	}
+
+	return ack;
+}
+
+static struct dma_client dmatest_client = {
+	.event_callback	= dmatest_event,
+};
+
+static int __init dmatest_init(void)
+{
+	dma_cap_set(DMA_MEMCPY, dmatest_client.cap_mask);
+	dma_async_client_register(&dmatest_client);
+	dma_async_client_chan_request(&dmatest_client);
+
+	return 0;
+}
+module_init(dmatest_init);
+
+static void __exit dmatest_exit(void)
+{
+	dma_async_client_unregister(&dmatest_client);
+}
+module_exit(dmatest_exit);
+
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From 848c536a37b8db4e461f14ca15fe29850151c822 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Tue, 8 Jul 2008 11:58:58 -0700
Subject: dmaengine: Add dma_client parameter to device_alloc_chan_resources

A DMA controller capable of doing slave transfers may need to know a
few things about the slave when preparing the channel. We don't want
to add this information to struct dma_channel since the channel hasn't
yet been bound to a client at this point.

Instead, pass a reference to the client requesting the channel to the
driver's device_alloc_chan_resources hook so that it can pick the
necessary information from the dma_client struct by itself.

[dan.j.williams@intel.com: fixed up fsldma and mv_xor]
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/dmaengine.c   | 3 ++-
 drivers/dma/fsldma.c      | 7 ++++---
 drivers/dma/ioat_dma.c    | 5 +++--
 drivers/dma/iop-adma.c    | 7 ++++---
 drivers/dma/mv_xor.c      | 7 ++++---
 include/linux/dmaengine.h | 3 ++-
 6 files changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 10de69eb1a3..7344f5dbd50 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -174,7 +174,8 @@ static void dma_client_chan_alloc(struct dma_client *client)
 			if (!dma_chan_satisfies_mask(chan, client->cap_mask))
 				continue;
 
-			desc = chan->device->device_alloc_chan_resources(chan);
+			desc = chan->device->device_alloc_chan_resources(
+					chan, client);
 			if (desc >= 0) {
 				ack = client->event_callback(client,
 						chan,
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 724f6fdd0af..c0059ca5834 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -366,7 +366,8 @@ static struct fsl_desc_sw *fsl_dma_alloc_descriptor(
  *
  * Return - The number of descriptors allocated.
  */
-static int fsl_dma_alloc_chan_resources(struct dma_chan *chan)
+static int fsl_dma_alloc_chan_resources(struct dma_chan *chan,
+					struct dma_client *client)
 {
 	struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
 	LIST_HEAD(tmp_list);
@@ -819,7 +820,7 @@ static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan)
 
 	chan = &fsl_chan->common;
 
-	if (fsl_dma_alloc_chan_resources(chan) < 1) {
+	if (fsl_dma_alloc_chan_resources(chan, NULL) < 1) {
 		dev_err(fsl_chan->dev,
 				"selftest: Cannot alloc resources for DMA\n");
 		err = -ENODEV;
@@ -847,7 +848,7 @@ static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan)
 	/* Test free and re-alloc channel resources */
 	fsl_dma_free_chan_resources(chan);
 
-	if (fsl_dma_alloc_chan_resources(chan) < 1) {
+	if (fsl_dma_alloc_chan_resources(chan, NULL) < 1) {
 		dev_err(fsl_chan->dev,
 				"selftest: Cannot alloc resources for DMA\n");
 		err = -ENODEV;
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index 318e8a22d81..90e5b0a28cb 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -452,7 +452,8 @@ static void ioat2_dma_massage_chan_desc(struct ioat_dma_chan *ioat_chan)
  * ioat_dma_alloc_chan_resources - returns the number of allocated descriptors
  * @chan: the channel to be filled out
  */
-static int ioat_dma_alloc_chan_resources(struct dma_chan *chan)
+static int ioat_dma_alloc_chan_resources(struct dma_chan *chan,
+					 struct dma_client *client)
 {
 	struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
 	struct ioat_desc_sw *desc;
@@ -1049,7 +1050,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
 	dma_chan = container_of(device->common.channels.next,
 				struct dma_chan,
 				device_node);
-	if (device->common.device_alloc_chan_resources(dma_chan) < 1) {
+	if (device->common.device_alloc_chan_resources(dma_chan, NULL) < 1) {
 		dev_err(&device->pdev->dev,
 			"selftest cannot allocate chan resource\n");
 		err = -ENODEV;
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 4e6b052c065..b57564dd023 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -444,7 +444,8 @@ static void iop_chan_start_null_memcpy(struct iop_adma_chan *iop_chan);
 static void iop_chan_start_null_xor(struct iop_adma_chan *iop_chan);
 
 /* returns the number of allocated descriptors */
-static int iop_adma_alloc_chan_resources(struct dma_chan *chan)
+static int iop_adma_alloc_chan_resources(struct dma_chan *chan,
+					 struct dma_client *client)
 {
 	char *hw_desc;
 	int idx;
@@ -838,7 +839,7 @@ static int __devinit iop_adma_memcpy_self_test(struct iop_adma_device *device)
 	dma_chan = container_of(device->common.channels.next,
 				struct dma_chan,
 				device_node);
-	if (iop_adma_alloc_chan_resources(dma_chan) < 1) {
+	if (iop_adma_alloc_chan_resources(dma_chan, NULL) < 1) {
 		err = -ENODEV;
 		goto out;
 	}
@@ -936,7 +937,7 @@ iop_adma_xor_zero_sum_self_test(struct iop_adma_device *device)
 	dma_chan = container_of(device->common.channels.next,
 				struct dma_chan,
 				device_node);
-	if (iop_adma_alloc_chan_resources(dma_chan) < 1) {
+	if (iop_adma_alloc_chan_resources(dma_chan, NULL) < 1) {
 		err = -ENODEV;
 		goto out;
 	}
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index f0c123ce8ae..8239cfdbc2e 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -588,7 +588,8 @@ submit_done:
 }
 
 /* returns the number of allocated descriptors */
-static int mv_xor_alloc_chan_resources(struct dma_chan *chan)
+static int mv_xor_alloc_chan_resources(struct dma_chan *chan,
+				       struct dma_client *client)
 {
 	char *hw_desc;
 	int idx;
@@ -938,7 +939,7 @@ static int __devinit mv_xor_memcpy_self_test(struct mv_xor_device *device)
 	dma_chan = container_of(device->common.channels.next,
 				struct dma_chan,
 				device_node);
-	if (mv_xor_alloc_chan_resources(dma_chan) < 1) {
+	if (mv_xor_alloc_chan_resources(dma_chan, NULL) < 1) {
 		err = -ENODEV;
 		goto out;
 	}
@@ -1033,7 +1034,7 @@ mv_xor_xor_self_test(struct mv_xor_device *device)
 	dma_chan = container_of(device->common.channels.next,
 				struct dma_chan,
 				device_node);
-	if (mv_xor_alloc_chan_resources(dma_chan) < 1) {
+	if (mv_xor_alloc_chan_resources(dma_chan, NULL) < 1) {
 		err = -ENODEV;
 		goto out;
 	}
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 6432b834322..ba89b0f5056 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -281,7 +281,8 @@ struct dma_device {
 	int dev_id;
 	struct device *dev;
 
-	int (*device_alloc_chan_resources)(struct dma_chan *chan);
+	int (*device_alloc_chan_resources)(struct dma_chan *chan,
+			struct dma_client *client);
 	void (*device_free_chan_resources)(struct dma_chan *chan);
 
 	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
-- 
cgit v1.2.3


From e1d181efb14a93cf263d6c588a5395518edf3294 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Fri, 4 Jul 2008 00:13:40 -0700
Subject: dmaengine: add DMA_COMPL_SKIP_{SRC,DEST}_UNMAP flags to control dma
 unmap

In some cases client code may need the dma-driver to skip the unmap of source
and/or destination buffers.  Setting these flags indicates to the driver to
skip the unmap step.  In this regard async_xor is currently broken in that it
allows the destination buffer to be unmapped while an operation is still in
progress, i.e. when the number of sources exceeds the hardware channel's
maximum (fixed in a subsequent patch).

Acked-by: Saeed Bishara <saeed@marvell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/ioat_dma.c    | 48 +++++++++++++++++++++++------------------------
 drivers/dma/iop-adma.c    | 29 +++++++++++++++++-----------
 drivers/dma/mv_xor.c      | 22 ++++++++++++++++------
 include/linux/dmaengine.h |  4 ++++
 4 files changed, 61 insertions(+), 42 deletions(-)

diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index 90e5b0a28cb..171cad69f31 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -757,6 +757,27 @@ static void ioat_dma_cleanup_tasklet(unsigned long data)
 	       chan->reg_base + IOAT_CHANCTRL_OFFSET);
 }
 
+static void
+ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc)
+{
+	/*
+	 * yes we are unmapping both _page and _single
+	 * alloc'd regions with unmap_page. Is this
+	 * *really* that bad?
+	 */
+	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP))
+		pci_unmap_page(ioat_chan->device->pdev,
+				pci_unmap_addr(desc, dst),
+				pci_unmap_len(desc, len),
+				PCI_DMA_FROMDEVICE);
+
+	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP))
+		pci_unmap_page(ioat_chan->device->pdev,
+				pci_unmap_addr(desc, src),
+				pci_unmap_len(desc, len),
+				PCI_DMA_TODEVICE);
+}
+
 /**
  * ioat_dma_memcpy_cleanup - cleanup up finished descriptors
  * @chan: ioat channel to be cleaned up
@@ -817,21 +838,7 @@ static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan)
 			 */
 			if (desc->async_tx.cookie) {
 				cookie = desc->async_tx.cookie;
-
-				/*
-				 * yes we are unmapping both _page and _single
-				 * alloc'd regions with unmap_page. Is this
-				 * *really* that bad?
-				 */
-				pci_unmap_page(ioat_chan->device->pdev,
-						pci_unmap_addr(desc, dst),
-						pci_unmap_len(desc, len),
-						PCI_DMA_FROMDEVICE);
-				pci_unmap_page(ioat_chan->device->pdev,
-						pci_unmap_addr(desc, src),
-						pci_unmap_len(desc, len),
-						PCI_DMA_TODEVICE);
-
+				ioat_dma_unmap(ioat_chan, desc);
 				if (desc->async_tx.callback) {
 					desc->async_tx.callback(desc->async_tx.callback_param);
 					desc->async_tx.callback = NULL;
@@ -890,16 +897,7 @@ static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan)
 				if (desc->async_tx.cookie) {
 					cookie = desc->async_tx.cookie;
 					desc->async_tx.cookie = 0;
-
-					pci_unmap_page(ioat_chan->device->pdev,
-						      pci_unmap_addr(desc, dst),
-						      pci_unmap_len(desc, len),
-						      PCI_DMA_FROMDEVICE);
-					pci_unmap_page(ioat_chan->device->pdev,
-						      pci_unmap_addr(desc, src),
-						      pci_unmap_len(desc, len),
-						      PCI_DMA_TODEVICE);
-
+					ioat_dma_unmap(ioat_chan, desc);
 					if (desc->async_tx.callback) {
 						desc->async_tx.callback(desc->async_tx.callback_param);
 						desc->async_tx.callback = NULL;
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index b57564dd023..434013d4128 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -82,17 +82,24 @@ iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc,
 			struct device *dev =
 				&iop_chan->device->pdev->dev;
 			u32 len = unmap->unmap_len;
-			u32 src_cnt = unmap->unmap_src_cnt;
-			dma_addr_t addr = iop_desc_get_dest_addr(unmap,
-				iop_chan);
-
-			dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
-			while (src_cnt--) {
-				addr = iop_desc_get_src_addr(unmap,
-							iop_chan,
-							src_cnt);
-				dma_unmap_page(dev, addr, len,
-					DMA_TO_DEVICE);
+			enum dma_ctrl_flags flags = desc->async_tx.flags;
+			u32 src_cnt;
+			dma_addr_t addr;
+
+			if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+				addr = iop_desc_get_dest_addr(unmap, iop_chan);
+				dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+			}
+
+			if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+				src_cnt = unmap->unmap_src_cnt;
+				while (src_cnt--) {
+					addr = iop_desc_get_src_addr(unmap,
+								     iop_chan,
+								     src_cnt);
+					dma_unmap_page(dev, addr, len,
+						       DMA_TO_DEVICE);
+				}
 			}
 			desc->group_head = NULL;
 		}
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 8239cfdbc2e..a4e4494663b 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -308,13 +308,23 @@ mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc,
 			struct device *dev =
 				&mv_chan->device->pdev->dev;
 			u32 len = unmap->unmap_len;
-			u32 src_cnt = unmap->unmap_src_cnt;
-			dma_addr_t addr = mv_desc_get_dest_addr(unmap);
+			enum dma_ctrl_flags flags = desc->async_tx.flags;
+			u32 src_cnt;
+			dma_addr_t addr;
 
-			dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
-			while (src_cnt--) {
-				addr = mv_desc_get_src_addr(unmap, src_cnt);
-				dma_unmap_page(dev, addr, len, DMA_TO_DEVICE);
+			if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+				addr = mv_desc_get_dest_addr(unmap);
+				dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+			}
+
+			if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+				src_cnt = unmap->unmap_src_cnt;
+				while (src_cnt--) {
+					addr = mv_desc_get_src_addr(unmap,
+								    src_cnt);
+					dma_unmap_page(dev, addr, len,
+						       DMA_TO_DEVICE);
+				}
 			}
 			desc->group_head = NULL;
 		}
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index ba89b0f5056..b058d636038 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -102,10 +102,14 @@ enum dma_transaction_type {
  * @DMA_CTRL_ACK - the descriptor cannot be reused until the client
  * 	acknowledges receipt, i.e. has has a chance to establish any
  * 	dependency chains
+ * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
+ * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
  */
 enum dma_ctrl_flags {
 	DMA_PREP_INTERRUPT = (1 << 0),
 	DMA_CTRL_ACK = (1 << 1),
+	DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2),
+	DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
 };
 
 /**
-- 
cgit v1.2.3


From dc0ee6435cb92ccc81b14ff28d163fecc5a7f120 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Tue, 8 Jul 2008 11:59:35 -0700
Subject: dmaengine: Add slave DMA interface

This patch adds the necessary interfaces to the DMA Engine framework
to use functionality found on most embedded DMA controllers: DMA from
and to I/O registers with hardware handshaking.

In this context, hardware hanshaking means that the peripheral that
owns the I/O registers in question is able to tell the DMA controller
when more data is available for reading, or when there is room for
more data to be written. This usually happens internally on the chip,
but these signals may also be exported outside the chip for things
like IDE DMA, etc.

A new struct dma_slave is introduced. This contains information that
the DMA engine driver needs to set up slave transfers to and from a
slave device. Most engines supporting DMA slave transfers will want to
extend this structure with controller-specific parameters.  This
additional information is usually passed from the platform/board code
through the client driver.

A "slave" pointer is added to the dma_client struct. This must point
to a valid dma_slave structure iff the DMA_SLAVE capability is
requested.  The DMA engine driver may use this information in its
device_alloc_chan_resources hook to configure the DMA controller for
slave transfers from and to the given slave device.

A new operation for preparing slave DMA transfers is added to struct
dma_device. This takes a scatterlist and returns a single descriptor
representing the whole transfer.

Another new operation for terminating all pending transfers is added as
well. The latter is needed because there may be errors outside the scope
of the DMA Engine framework that may require DMA operations to be
terminated prematurely.

DMA Engine drivers may extend the dma_device, dma_chan and/or
dma_slave_descriptor structures to allow controller-specific
operations. The client driver can detect such extensions by looking at
the DMA Engine's struct device, or it can request a specific DMA
Engine device by setting the dma_dev field in struct dma_slave.

dmaslave interface changes since v4:
  * Fix checkpatch errors
  * Fix changelog (there are no slave descriptors anymore)

dmaslave interface changes since v3:
  * Use dma_data_direction instead of a new enum
  * Submit slave transfers as scatterlists
  * Remove the DMA slave descriptor struct

dmaslave interface changes since v2:
  * Add a dma_dev field to struct dma_slave. If set, the client can
    only be bound to the DMA controller that corresponds to this
    device.  This allows controller-specific extensions of the
    dma_slave structure; if the device matches, the controller may
    safely assume its extensions are present.
  * Move reg_width into struct dma_slave as there are currently no
    users that need to be able to set the width on a per-transfer
    basis.

dmaslave interface changes since v1:
  * Drop the set_direction and set_width descriptor hooks. Pass the
    direction and width to the prep function instead.
  * Declare a dma_slave struct with fixed information about a slave,
    i.e. register addresses, handshake interfaces and such.
  * Add pointer to a dma_slave struct to dma_client. Can be NULL if
    the DMA_SLAVE capability isn't requested.
  * Drop the set_slave device hook since the alloc_chan_resources hook
    now has enough information to set up the channel for slave
    transfers.

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/dmaengine.c   | 16 ++++++++++++++-
 include/linux/dmaengine.h | 52 ++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 66 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 7344f5dbd50..dc003a3a787 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -169,7 +169,12 @@ static void dma_client_chan_alloc(struct dma_client *client)
 	enum dma_state_client ack;
 
 	/* Find a channel */
-	list_for_each_entry(device, &dma_device_list, global_node)
+	list_for_each_entry(device, &dma_device_list, global_node) {
+		/* Does the client require a specific DMA controller? */
+		if (client->slave && client->slave->dma_dev
+				&& client->slave->dma_dev != device->dev)
+			continue;
+
 		list_for_each_entry(chan, &device->channels, device_node) {
 			if (!dma_chan_satisfies_mask(chan, client->cap_mask))
 				continue;
@@ -191,6 +196,7 @@ static void dma_client_chan_alloc(struct dma_client *client)
 					return;
 			}
 		}
+	}
 }
 
 enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie)
@@ -289,6 +295,10 @@ static void dma_clients_notify_removed(struct dma_chan *chan)
  */
 void dma_async_client_register(struct dma_client *client)
 {
+	/* validate client data */
+	BUG_ON(dma_has_cap(DMA_SLAVE, client->cap_mask) &&
+		!client->slave);
+
 	mutex_lock(&dma_list_mutex);
 	list_add_tail(&client->global_node, &dma_client_list);
 	mutex_unlock(&dma_list_mutex);
@@ -365,6 +375,10 @@ int dma_async_device_register(struct dma_device *device)
 		!device->device_prep_dma_memset);
 	BUG_ON(dma_has_cap(DMA_INTERRUPT, device->cap_mask) &&
 		!device->device_prep_dma_interrupt);
+	BUG_ON(dma_has_cap(DMA_SLAVE, device->cap_mask) &&
+		!device->device_prep_slave_sg);
+	BUG_ON(dma_has_cap(DMA_SLAVE, device->cap_mask) &&
+		!device->device_terminate_all);
 
 	BUG_ON(!device->device_alloc_chan_resources);
 	BUG_ON(!device->device_free_chan_resources);
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index b058d636038..9b91d341e1f 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -89,10 +89,23 @@ enum dma_transaction_type {
 	DMA_MEMSET,
 	DMA_MEMCPY_CRC32C,
 	DMA_INTERRUPT,
+	DMA_SLAVE,
 };
 
 /* last transaction type for creation of the capabilities mask */
-#define DMA_TX_TYPE_END (DMA_INTERRUPT + 1)
+#define DMA_TX_TYPE_END (DMA_SLAVE + 1)
+
+/**
+ * enum dma_slave_width - DMA slave register access width.
+ * @DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum dma_slave_width {
+	DMA_SLAVE_WIDTH_8BIT,
+	DMA_SLAVE_WIDTH_16BIT,
+	DMA_SLAVE_WIDTH_32BIT,
+};
 
 /**
  * enum dma_ctrl_flags - DMA flags to augment operation preparation,
@@ -118,6 +131,32 @@ enum dma_ctrl_flags {
  */
 typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t;
 
+/**
+ * struct dma_slave - Information about a DMA slave
+ * @dev: device acting as DMA slave
+ * @dma_dev: required DMA master device. If non-NULL, the client can not be
+ *	bound to other masters than this.
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ *
+ * If dma_dev is non-NULL, the client can not be bound to other DMA
+ * masters than the one corresponding to this device. The DMA master
+ * driver may use this to determine if there is controller-specific
+ * data wrapped around this struct. Drivers of platform code that sets
+ * the dma_dev field must therefore make sure to use an appropriate
+ * controller-specific dma slave structure wrapping this struct.
+ */
+struct dma_slave {
+	struct device		*dev;
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum dma_slave_width	reg_width;
+};
+
 /**
  * struct dma_chan_percpu - the per-CPU part of struct dma_chan
  * @refcount: local_t used for open-coded "bigref" counting
@@ -208,11 +247,14 @@ typedef enum dma_state_client (*dma_event_callback) (struct dma_client *client,
  * @event_callback: func ptr to call when something happens
  * @cap_mask: only return channels that satisfy the requested capabilities
  *  a value of zero corresponds to any capability
+ * @slave: data for preparing slave transfer. Must be non-NULL iff the
+ *  DMA_SLAVE capability is requested.
  * @global_node: list_head for global dma_client_list
  */
 struct dma_client {
 	dma_event_callback	event_callback;
 	dma_cap_mask_t		cap_mask;
+	struct dma_slave	*slave;
 	struct list_head	global_node;
 };
 
@@ -269,6 +311,8 @@ struct dma_async_tx_descriptor {
  * @device_prep_dma_zero_sum: prepares a zero_sum operation
  * @device_prep_dma_memset: prepares a memset operation
  * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
+ * @device_prep_slave_sg: prepares a slave dma operation
+ * @device_terminate_all: terminate all pending operations
  * @device_issue_pending: push pending transactions to hardware
  */
 struct dma_device {
@@ -304,6 +348,12 @@ struct dma_device {
 	struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)(
 		struct dma_chan *chan, unsigned long flags);
 
+	struct dma_async_tx_descriptor *(*device_prep_slave_sg)(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_data_direction direction,
+		unsigned long flags);
+	void (*device_terminate_all)(struct dma_chan *chan);
+
 	enum dma_status (*device_is_tx_complete)(struct dma_chan *chan,
 			dma_cookie_t cookie, dma_cookie_t *last,
 			dma_cookie_t *used);
-- 
cgit v1.2.3


From 3bfb1d20b547a5071d01344581eac5846ea84491 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Tue, 8 Jul 2008 11:59:42 -0700
Subject: dmaengine: Driver for the Synopsys DesignWare DMA controller

This adds a driver for the Synopsys DesignWare DMA controller (aka
DMACA on AVR32 systems.) This DMA controller can be found integrated
on the AT32AP7000 chip and is primarily meant for peripheral DMA
transfer, but can also be used for memory-to-memory transfers.

This patch is based on a driver from David Brownell which was based on
an older version of the DMA Engine framework. It also implements the
proposed extensions to the DMA Engine API for slave DMA operations.

The dmatest client shows no problems, but there may still be room for
improvement performance-wise. DMA slave transfer performance is
definitely "good enough"; reading 100 MiB from an SD card running at ~20
MHz yields ~7.2 MiB/s average transfer rate.

Full documentation for this controller can be found in the Synopsys
DW AHB DMAC Databook:

http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf

The controller has lots of implementation options, so it's usually a
good idea to check the data sheet of the chip it's intergrated on as
well. The AT32AP7000 data sheet can be found here:

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682


Changes since v4:
  * Use client_count instead of dma_chan_is_in_use()
  * Add missing include
  * Unmap buffers unless client told us not to

Changes since v3:
  * Update to latest DMA engine and DMA slave APIs
  * Embed the hw descriptor into the sw descriptor
  * Clean up and update MODULE_DESCRIPTION, copyright date, etc.

Changes since v2:
  * Dequeue all pending transfers in terminate_all()
  * Rename dw_dmac.h -> dw_dmac_regs.h
  * Define and use controller-specific dma_slave data
  * Fix up a few outdated comments
  * Define hardware registers as structs (doesn't generate better
    code, unfortunately, but it looks nicer.)
  * Get number of channels from platform_data instead of hardcoding it
    based on CONFIG_WHATEVER_CPU.
  * Give slave clients exclusive access to the channel

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>,
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/avr32/mach-at32ap/at32ap700x.c        |   27 +-
 drivers/dma/Kconfig                        |    9 +
 drivers/dma/Makefile                       |    1 +
 drivers/dma/dw_dmac.c                      | 1122 ++++++++++++++++++++++++++++
 drivers/dma/dw_dmac_regs.h                 |  225 ++++++
 include/asm-avr32/arch-at32ap/at32ap700x.h |   16 +
 include/linux/dw_dmac.h                    |   62 ++
 7 files changed, 1449 insertions(+), 13 deletions(-)
 create mode 100644 drivers/dma/dw_dmac.c
 create mode 100644 drivers/dma/dw_dmac_regs.h
 create mode 100644 include/linux/dw_dmac.h

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 0f24b4f85c1..892e27e0d58 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -7,6 +7,7 @@
  */
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dw_dmac.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -599,6 +600,17 @@ static void __init genclk_init_parent(struct clk *clk)
 	clk->parent = parent;
 }
 
+static struct dw_dma_platform_data dw_dmac0_data = {
+	.nr_channels	= 3,
+};
+
+static struct resource dw_dmac0_resource[] = {
+	PBMEM(0xff200000),
+	IRQ(2),
+};
+DEFINE_DEV_DATA(dw_dmac, 0);
+DEV_CLK(hclk, dw_dmac0, hsb, 10);
+
 /* --------------------------------------------------------------------
  *  System peripherals
  * -------------------------------------------------------------------- */
@@ -705,17 +717,6 @@ static struct clk pico_clk = {
 	.users		= 1,
 };
 
-static struct resource dmaca0_resource[] = {
-	{
-		.start	= 0xff200000,
-		.end	= 0xff20ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(2),
-};
-DEFINE_DEV(dmaca, 0);
-DEV_CLK(hclk, dmaca0, hsb, 10);
-
 /* --------------------------------------------------------------------
  * HMATRIX
  * -------------------------------------------------------------------- */
@@ -828,7 +829,7 @@ void __init at32_add_system_devices(void)
 	platform_device_register(&at32_eic0_device);
 	platform_device_register(&smc0_device);
 	platform_device_register(&pdc_device);
-	platform_device_register(&dmaca0_device);
+	platform_device_register(&dw_dmac0_device);
 
 	platform_device_register(&at32_tcb0_device);
 	platform_device_register(&at32_tcb1_device);
@@ -1891,7 +1892,7 @@ struct clk *at32_clock_list[] = {
 	&smc0_mck,
 	&pdc_hclk,
 	&pdc_pclk,
-	&dmaca0_hclk,
+	&dw_dmac0_hclk,
 	&pico_clk,
 	&pio0_mck,
 	&pio1_mck,
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 4b6bd3d099c..cd303901eb5 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -38,6 +38,15 @@ config INTEL_IOP_ADMA
 	help
 	  Enable support for the Intel(R) IOP Series RAID engines.
 
+config DW_DMAC
+	tristate "Synopsys DesignWare AHB DMA support"
+	depends on AVR32
+	select DMA_ENGINE
+	default y if CPU_AT32AP7000
+	help
+	  Support the Synopsys DesignWare AHB DMA controller.  This
+	  can be integrated in chips such as the Atmel AT32ap7000.
+
 config FSL_DMA
 	bool "Freescale MPC85xx/MPC83xx DMA support"
 	depends on PPC
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 181e3646fbf..14f59527d4f 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -6,3 +6,4 @@ ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
+obj-$(CONFIG_DW_DMAC) += dw_dmac.o
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
new file mode 100644
index 00000000000..94df9177124
--- /dev/null
+++ b/drivers/dma/dw_dmac.c
@@ -0,0 +1,1122 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller (aka DMACA on
+ * AVR32 systems.)
+ *
+ * Copyright (C) 2007-2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "dw_dmac_regs.h"
+
+/*
+ * This supports the Synopsys "DesignWare AHB Central DMA Controller",
+ * (DW_ahb_dmac) which is used with various AMBA 2.0 systems (not all
+ * of which use ARM any more).  See the "Databook" from Synopsys for
+ * information beyond what licensees probably provide.
+ *
+ * The driver has currently been tested only with the Atmel AT32AP7000,
+ * which does not support descriptor writeback.
+ */
+
+/* NOTE:  DMS+SMS is system-specific. We should get this information
+ * from the platform code somehow.
+ */
+#define DWC_DEFAULT_CTLLO	(DWC_CTLL_DST_MSIZE(0)		\
+				| DWC_CTLL_SRC_MSIZE(0)		\
+				| DWC_CTLL_DMS(0)		\
+				| DWC_CTLL_SMS(1)		\
+				| DWC_CTLL_LLP_D_EN		\
+				| DWC_CTLL_LLP_S_EN)
+
+/*
+ * This is configuration-dependent and usually a funny size like 4095.
+ * Let's round it down to the nearest power of two.
+ *
+ * Note that this is a transfer count, i.e. if we transfer 32-bit
+ * words, we can do 8192 bytes per descriptor.
+ *
+ * This parameter is also system-specific.
+ */
+#define DWC_MAX_COUNT	2048U
+
+/*
+ * Number of descriptors to allocate for each channel. This should be
+ * made configurable somehow; preferably, the clients (at least the
+ * ones using slave transfers) should be able to give us a hint.
+ */
+#define NR_DESCS_PER_CHANNEL	64
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Because we're not relying on writeback from the controller (it may not
+ * even be configured into the core!) we don't need to use dma_pool.  These
+ * descriptors -- and associated data -- are cacheable.  We do need to make
+ * sure their dcache entries are written back before handing them off to
+ * the controller, though.
+ */
+
+static struct dw_desc *dwc_first_active(struct dw_dma_chan *dwc)
+{
+	return list_entry(dwc->active_list.next, struct dw_desc, desc_node);
+}
+
+static struct dw_desc *dwc_first_queued(struct dw_dma_chan *dwc)
+{
+	return list_entry(dwc->queue.next, struct dw_desc, desc_node);
+}
+
+static struct dw_desc *dwc_desc_get(struct dw_dma_chan *dwc)
+{
+	struct dw_desc *desc, *_desc;
+	struct dw_desc *ret = NULL;
+	unsigned int i = 0;
+
+	spin_lock_bh(&dwc->lock);
+	list_for_each_entry_safe(desc, _desc, &dwc->free_list, desc_node) {
+		if (async_tx_test_ack(&desc->txd)) {
+			list_del(&desc->desc_node);
+			ret = desc;
+			break;
+		}
+		dev_dbg(&dwc->chan.dev, "desc %p not ACKed\n", desc);
+		i++;
+	}
+	spin_unlock_bh(&dwc->lock);
+
+	dev_vdbg(&dwc->chan.dev, "scanned %u descriptors on freelist\n", i);
+
+	return ret;
+}
+
+static void dwc_sync_desc_for_cpu(struct dw_dma_chan *dwc, struct dw_desc *desc)
+{
+	struct dw_desc	*child;
+
+	list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+		dma_sync_single_for_cpu(dwc->chan.dev.parent,
+				child->txd.phys, sizeof(child->lli),
+				DMA_TO_DEVICE);
+	dma_sync_single_for_cpu(dwc->chan.dev.parent,
+			desc->txd.phys, sizeof(desc->lli),
+			DMA_TO_DEVICE);
+}
+
+/*
+ * Move a descriptor, including any children, to the free list.
+ * `desc' must not be on any lists.
+ */
+static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc)
+{
+	if (desc) {
+		struct dw_desc *child;
+
+		dwc_sync_desc_for_cpu(dwc, desc);
+
+		spin_lock_bh(&dwc->lock);
+		list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+			dev_vdbg(&dwc->chan.dev,
+					"moving child desc %p to freelist\n",
+					child);
+		list_splice_init(&desc->txd.tx_list, &dwc->free_list);
+		dev_vdbg(&dwc->chan.dev, "moving desc %p to freelist\n", desc);
+		list_add(&desc->desc_node, &dwc->free_list);
+		spin_unlock_bh(&dwc->lock);
+	}
+}
+
+/* Called with dwc->lock held and bh disabled */
+static dma_cookie_t
+dwc_assign_cookie(struct dw_dma_chan *dwc, struct dw_desc *desc)
+{
+	dma_cookie_t cookie = dwc->chan.cookie;
+
+	if (++cookie < 0)
+		cookie = 1;
+
+	dwc->chan.cookie = cookie;
+	desc->txd.cookie = cookie;
+
+	return cookie;
+}
+
+/*----------------------------------------------------------------------*/
+
+/* Called with dwc->lock held and bh disabled */
+static void dwc_dostart(struct dw_dma_chan *dwc, struct dw_desc *first)
+{
+	struct dw_dma	*dw = to_dw_dma(dwc->chan.device);
+
+	/* ASSERT:  channel is idle */
+	if (dma_readl(dw, CH_EN) & dwc->mask) {
+		dev_err(&dwc->chan.dev,
+			"BUG: Attempted to start non-idle channel\n");
+		dev_err(&dwc->chan.dev,
+			"  SAR: 0x%x DAR: 0x%x LLP: 0x%x CTL: 0x%x:%08x\n",
+			channel_readl(dwc, SAR),
+			channel_readl(dwc, DAR),
+			channel_readl(dwc, LLP),
+			channel_readl(dwc, CTL_HI),
+			channel_readl(dwc, CTL_LO));
+
+		/* The tasklet will hopefully advance the queue... */
+		return;
+	}
+
+	channel_writel(dwc, LLP, first->txd.phys);
+	channel_writel(dwc, CTL_LO,
+			DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN);
+	channel_writel(dwc, CTL_HI, 0);
+	channel_set_bit(dw, CH_EN, dwc->mask);
+}
+
+/*----------------------------------------------------------------------*/
+
+static void
+dwc_descriptor_complete(struct dw_dma_chan *dwc, struct dw_desc *desc)
+{
+	dma_async_tx_callback		callback;
+	void				*param;
+	struct dma_async_tx_descriptor	*txd = &desc->txd;
+
+	dev_vdbg(&dwc->chan.dev, "descriptor %u complete\n", txd->cookie);
+
+	dwc->completed = txd->cookie;
+	callback = txd->callback;
+	param = txd->callback_param;
+
+	dwc_sync_desc_for_cpu(dwc, desc);
+	list_splice_init(&txd->tx_list, &dwc->free_list);
+	list_move(&desc->desc_node, &dwc->free_list);
+
+	/*
+	 * We use dma_unmap_page() regardless of how the buffers were
+	 * mapped before they were submitted...
+	 */
+	if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP))
+		dma_unmap_page(dwc->chan.dev.parent, desc->lli.dar, desc->len,
+				DMA_FROM_DEVICE);
+	if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP))
+		dma_unmap_page(dwc->chan.dev.parent, desc->lli.sar, desc->len,
+				DMA_TO_DEVICE);
+
+	/*
+	 * The API requires that no submissions are done from a
+	 * callback, so we don't need to drop the lock here
+	 */
+	if (callback)
+		callback(param);
+}
+
+static void dwc_complete_all(struct dw_dma *dw, struct dw_dma_chan *dwc)
+{
+	struct dw_desc *desc, *_desc;
+	LIST_HEAD(list);
+
+	if (dma_readl(dw, CH_EN) & dwc->mask) {
+		dev_err(&dwc->chan.dev,
+			"BUG: XFER bit set, but channel not idle!\n");
+
+		/* Try to continue after resetting the channel... */
+		channel_clear_bit(dw, CH_EN, dwc->mask);
+		while (dma_readl(dw, CH_EN) & dwc->mask)
+			cpu_relax();
+	}
+
+	/*
+	 * Submit queued descriptors ASAP, i.e. before we go through
+	 * the completed ones.
+	 */
+	if (!list_empty(&dwc->queue))
+		dwc_dostart(dwc, dwc_first_queued(dwc));
+	list_splice_init(&dwc->active_list, &list);
+	list_splice_init(&dwc->queue, &dwc->active_list);
+
+	list_for_each_entry_safe(desc, _desc, &list, desc_node)
+		dwc_descriptor_complete(dwc, desc);
+}
+
+static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc)
+{
+	dma_addr_t llp;
+	struct dw_desc *desc, *_desc;
+	struct dw_desc *child;
+	u32 status_xfer;
+
+	/*
+	 * Clear block interrupt flag before scanning so that we don't
+	 * miss any, and read LLP before RAW_XFER to ensure it is
+	 * valid if we decide to scan the list.
+	 */
+	dma_writel(dw, CLEAR.BLOCK, dwc->mask);
+	llp = channel_readl(dwc, LLP);
+	status_xfer = dma_readl(dw, RAW.XFER);
+
+	if (status_xfer & dwc->mask) {
+		/* Everything we've submitted is done */
+		dma_writel(dw, CLEAR.XFER, dwc->mask);
+		dwc_complete_all(dw, dwc);
+		return;
+	}
+
+	dev_vdbg(&dwc->chan.dev, "scan_descriptors: llp=0x%x\n", llp);
+
+	list_for_each_entry_safe(desc, _desc, &dwc->active_list, desc_node) {
+		if (desc->lli.llp == llp)
+			/* This one is currently in progress */
+			return;
+
+		list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+			if (child->lli.llp == llp)
+				/* Currently in progress */
+				return;
+
+		/*
+		 * No descriptors so far seem to be in progress, i.e.
+		 * this one must be done.
+		 */
+		dwc_descriptor_complete(dwc, desc);
+	}
+
+	dev_err(&dwc->chan.dev,
+		"BUG: All descriptors done, but channel not idle!\n");
+
+	/* Try to continue after resetting the channel... */
+	channel_clear_bit(dw, CH_EN, dwc->mask);
+	while (dma_readl(dw, CH_EN) & dwc->mask)
+		cpu_relax();
+
+	if (!list_empty(&dwc->queue)) {
+		dwc_dostart(dwc, dwc_first_queued(dwc));
+		list_splice_init(&dwc->queue, &dwc->active_list);
+	}
+}
+
+static void dwc_dump_lli(struct dw_dma_chan *dwc, struct dw_lli *lli)
+{
+	dev_printk(KERN_CRIT, &dwc->chan.dev,
+			"  desc: s0x%x d0x%x l0x%x c0x%x:%x\n",
+			lli->sar, lli->dar, lli->llp,
+			lli->ctlhi, lli->ctllo);
+}
+
+static void dwc_handle_error(struct dw_dma *dw, struct dw_dma_chan *dwc)
+{
+	struct dw_desc *bad_desc;
+	struct dw_desc *child;
+
+	dwc_scan_descriptors(dw, dwc);
+
+	/*
+	 * The descriptor currently at the head of the active list is
+	 * borked. Since we don't have any way to report errors, we'll
+	 * just have to scream loudly and try to carry on.
+	 */
+	bad_desc = dwc_first_active(dwc);
+	list_del_init(&bad_desc->desc_node);
+	list_splice_init(&dwc->queue, dwc->active_list.prev);
+
+	/* Clear the error flag and try to restart the controller */
+	dma_writel(dw, CLEAR.ERROR, dwc->mask);
+	if (!list_empty(&dwc->active_list))
+		dwc_dostart(dwc, dwc_first_active(dwc));
+
+	/*
+	 * KERN_CRITICAL may seem harsh, but since this only happens
+	 * when someone submits a bad physical address in a
+	 * descriptor, we should consider ourselves lucky that the
+	 * controller flagged an error instead of scribbling over
+	 * random memory locations.
+	 */
+	dev_printk(KERN_CRIT, &dwc->chan.dev,
+			"Bad descriptor submitted for DMA!\n");
+	dev_printk(KERN_CRIT, &dwc->chan.dev,
+			"  cookie: %d\n", bad_desc->txd.cookie);
+	dwc_dump_lli(dwc, &bad_desc->lli);
+	list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+		dwc_dump_lli(dwc, &child->lli);
+
+	/* Pretend the descriptor completed successfully */
+	dwc_descriptor_complete(dwc, bad_desc);
+}
+
+static void dw_dma_tasklet(unsigned long data)
+{
+	struct dw_dma *dw = (struct dw_dma *)data;
+	struct dw_dma_chan *dwc;
+	u32 status_block;
+	u32 status_xfer;
+	u32 status_err;
+	int i;
+
+	status_block = dma_readl(dw, RAW.BLOCK);
+	status_xfer = dma_readl(dw, RAW.BLOCK);
+	status_err = dma_readl(dw, RAW.ERROR);
+
+	dev_vdbg(dw->dma.dev, "tasklet: status_block=%x status_err=%x\n",
+			status_block, status_err);
+
+	for (i = 0; i < dw->dma.chancnt; i++) {
+		dwc = &dw->chan[i];
+		spin_lock(&dwc->lock);
+		if (status_err & (1 << i))
+			dwc_handle_error(dw, dwc);
+		else if ((status_block | status_xfer) & (1 << i))
+			dwc_scan_descriptors(dw, dwc);
+		spin_unlock(&dwc->lock);
+	}
+
+	/*
+	 * Re-enable interrupts. Block Complete interrupts are only
+	 * enabled if the INT_EN bit in the descriptor is set. This
+	 * will trigger a scan before the whole list is done.
+	 */
+	channel_set_bit(dw, MASK.XFER, dw->all_chan_mask);
+	channel_set_bit(dw, MASK.BLOCK, dw->all_chan_mask);
+	channel_set_bit(dw, MASK.ERROR, dw->all_chan_mask);
+}
+
+static irqreturn_t dw_dma_interrupt(int irq, void *dev_id)
+{
+	struct dw_dma *dw = dev_id;
+	u32 status;
+
+	dev_vdbg(dw->dma.dev, "interrupt: status=0x%x\n",
+			dma_readl(dw, STATUS_INT));
+
+	/*
+	 * Just disable the interrupts. We'll turn them back on in the
+	 * softirq handler.
+	 */
+	channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.BLOCK, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.ERROR, dw->all_chan_mask);
+
+	status = dma_readl(dw, STATUS_INT);
+	if (status) {
+		dev_err(dw->dma.dev,
+			"BUG: Unexpected interrupts pending: 0x%x\n",
+			status);
+
+		/* Try to recover */
+		channel_clear_bit(dw, MASK.XFER, (1 << 8) - 1);
+		channel_clear_bit(dw, MASK.BLOCK, (1 << 8) - 1);
+		channel_clear_bit(dw, MASK.SRC_TRAN, (1 << 8) - 1);
+		channel_clear_bit(dw, MASK.DST_TRAN, (1 << 8) - 1);
+		channel_clear_bit(dw, MASK.ERROR, (1 << 8) - 1);
+	}
+
+	tasklet_schedule(&dw->tasklet);
+
+	return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct dw_desc		*desc = txd_to_dw_desc(tx);
+	struct dw_dma_chan	*dwc = to_dw_dma_chan(tx->chan);
+	dma_cookie_t		cookie;
+
+	spin_lock_bh(&dwc->lock);
+	cookie = dwc_assign_cookie(dwc, desc);
+
+	/*
+	 * REVISIT: We should attempt to chain as many descriptors as
+	 * possible, perhaps even appending to those already submitted
+	 * for DMA. But this is hard to do in a race-free manner.
+	 */
+	if (list_empty(&dwc->active_list)) {
+		dev_vdbg(&tx->chan->dev, "tx_submit: started %u\n",
+				desc->txd.cookie);
+		dwc_dostart(dwc, desc);
+		list_add_tail(&desc->desc_node, &dwc->active_list);
+	} else {
+		dev_vdbg(&tx->chan->dev, "tx_submit: queued %u\n",
+				desc->txd.cookie);
+
+		list_add_tail(&desc->desc_node, &dwc->queue);
+	}
+
+	spin_unlock_bh(&dwc->lock);
+
+	return cookie;
+}
+
+static struct dma_async_tx_descriptor *
+dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags)
+{
+	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+	struct dw_desc		*desc;
+	struct dw_desc		*first;
+	struct dw_desc		*prev;
+	size_t			xfer_count;
+	size_t			offset;
+	unsigned int		src_width;
+	unsigned int		dst_width;
+	u32			ctllo;
+
+	dev_vdbg(&chan->dev, "prep_dma_memcpy d0x%x s0x%x l0x%zx f0x%lx\n",
+			dest, src, len, flags);
+
+	if (unlikely(!len)) {
+		dev_dbg(&chan->dev, "prep_dma_memcpy: length is zero!\n");
+		return NULL;
+	}
+
+	/*
+	 * We can be a lot more clever here, but this should take care
+	 * of the most common optimization.
+	 */
+	if (!((src | dest  | len) & 3))
+		src_width = dst_width = 2;
+	else if (!((src | dest | len) & 1))
+		src_width = dst_width = 1;
+	else
+		src_width = dst_width = 0;
+
+	ctllo = DWC_DEFAULT_CTLLO
+			| DWC_CTLL_DST_WIDTH(dst_width)
+			| DWC_CTLL_SRC_WIDTH(src_width)
+			| DWC_CTLL_DST_INC
+			| DWC_CTLL_SRC_INC
+			| DWC_CTLL_FC_M2M;
+	prev = first = NULL;
+
+	for (offset = 0; offset < len; offset += xfer_count << src_width) {
+		xfer_count = min_t(size_t, (len - offset) >> src_width,
+				DWC_MAX_COUNT);
+
+		desc = dwc_desc_get(dwc);
+		if (!desc)
+			goto err_desc_get;
+
+		desc->lli.sar = src + offset;
+		desc->lli.dar = dest + offset;
+		desc->lli.ctllo = ctllo;
+		desc->lli.ctlhi = xfer_count;
+
+		if (!first) {
+			first = desc;
+		} else {
+			prev->lli.llp = desc->txd.phys;
+			dma_sync_single_for_device(chan->dev.parent,
+					prev->txd.phys, sizeof(prev->lli),
+					DMA_TO_DEVICE);
+			list_add_tail(&desc->desc_node,
+					&first->txd.tx_list);
+		}
+		prev = desc;
+	}
+
+
+	if (flags & DMA_PREP_INTERRUPT)
+		/* Trigger interrupt after last block */
+		prev->lli.ctllo |= DWC_CTLL_INT_EN;
+
+	prev->lli.llp = 0;
+	dma_sync_single_for_device(chan->dev.parent,
+			prev->txd.phys, sizeof(prev->lli),
+			DMA_TO_DEVICE);
+
+	first->txd.flags = flags;
+	first->len = len;
+
+	return &first->txd;
+
+err_desc_get:
+	dwc_desc_put(dwc, first);
+	return NULL;
+}
+
+static struct dma_async_tx_descriptor *
+dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_data_direction direction,
+		unsigned long flags)
+{
+	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+	struct dw_dma_slave	*dws = dwc->dws;
+	struct dw_desc		*prev;
+	struct dw_desc		*first;
+	u32			ctllo;
+	dma_addr_t		reg;
+	unsigned int		reg_width;
+	unsigned int		mem_width;
+	unsigned int		i;
+	struct scatterlist	*sg;
+	size_t			total_len = 0;
+
+	dev_vdbg(&chan->dev, "prep_dma_slave\n");
+
+	if (unlikely(!dws || !sg_len))
+		return NULL;
+
+	reg_width = dws->slave.reg_width;
+	prev = first = NULL;
+
+	sg_len = dma_map_sg(chan->dev.parent, sgl, sg_len, direction);
+
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		ctllo = (DWC_DEFAULT_CTLLO
+				| DWC_CTLL_DST_WIDTH(reg_width)
+				| DWC_CTLL_DST_FIX
+				| DWC_CTLL_SRC_INC
+				| DWC_CTLL_FC_M2P);
+		reg = dws->slave.tx_reg;
+		for_each_sg(sgl, sg, sg_len, i) {
+			struct dw_desc	*desc;
+			u32		len;
+			u32		mem;
+
+			desc = dwc_desc_get(dwc);
+			if (!desc) {
+				dev_err(&chan->dev,
+					"not enough descriptors available\n");
+				goto err_desc_get;
+			}
+
+			mem = sg_phys(sg);
+			len = sg_dma_len(sg);
+			mem_width = 2;
+			if (unlikely(mem & 3 || len & 3))
+				mem_width = 0;
+
+			desc->lli.sar = mem;
+			desc->lli.dar = reg;
+			desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width);
+			desc->lli.ctlhi = len >> mem_width;
+
+			if (!first) {
+				first = desc;
+			} else {
+				prev->lli.llp = desc->txd.phys;
+				dma_sync_single_for_device(chan->dev.parent,
+						prev->txd.phys,
+						sizeof(prev->lli),
+						DMA_TO_DEVICE);
+				list_add_tail(&desc->desc_node,
+						&first->txd.tx_list);
+			}
+			prev = desc;
+			total_len += len;
+		}
+		break;
+	case DMA_FROM_DEVICE:
+		ctllo = (DWC_DEFAULT_CTLLO
+				| DWC_CTLL_SRC_WIDTH(reg_width)
+				| DWC_CTLL_DST_INC
+				| DWC_CTLL_SRC_FIX
+				| DWC_CTLL_FC_P2M);
+
+		reg = dws->slave.rx_reg;
+		for_each_sg(sgl, sg, sg_len, i) {
+			struct dw_desc	*desc;
+			u32		len;
+			u32		mem;
+
+			desc = dwc_desc_get(dwc);
+			if (!desc) {
+				dev_err(&chan->dev,
+					"not enough descriptors available\n");
+				goto err_desc_get;
+			}
+
+			mem = sg_phys(sg);
+			len = sg_dma_len(sg);
+			mem_width = 2;
+			if (unlikely(mem & 3 || len & 3))
+				mem_width = 0;
+
+			desc->lli.sar = reg;
+			desc->lli.dar = mem;
+			desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width);
+			desc->lli.ctlhi = len >> reg_width;
+
+			if (!first) {
+				first = desc;
+			} else {
+				prev->lli.llp = desc->txd.phys;
+				dma_sync_single_for_device(chan->dev.parent,
+						prev->txd.phys,
+						sizeof(prev->lli),
+						DMA_TO_DEVICE);
+				list_add_tail(&desc->desc_node,
+						&first->txd.tx_list);
+			}
+			prev = desc;
+			total_len += len;
+		}
+		break;
+	default:
+		return NULL;
+	}
+
+	if (flags & DMA_PREP_INTERRUPT)
+		/* Trigger interrupt after last block */
+		prev->lli.ctllo |= DWC_CTLL_INT_EN;
+
+	prev->lli.llp = 0;
+	dma_sync_single_for_device(chan->dev.parent,
+			prev->txd.phys, sizeof(prev->lli),
+			DMA_TO_DEVICE);
+
+	first->len = total_len;
+
+	return &first->txd;
+
+err_desc_get:
+	dwc_desc_put(dwc, first);
+	return NULL;
+}
+
+static void dwc_terminate_all(struct dma_chan *chan)
+{
+	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+	struct dw_dma		*dw = to_dw_dma(chan->device);
+	struct dw_desc		*desc, *_desc;
+	LIST_HEAD(list);
+
+	/*
+	 * This is only called when something went wrong elsewhere, so
+	 * we don't really care about the data. Just disable the
+	 * channel. We still have to poll the channel enable bit due
+	 * to AHB/HSB limitations.
+	 */
+	spin_lock_bh(&dwc->lock);
+
+	channel_clear_bit(dw, CH_EN, dwc->mask);
+
+	while (dma_readl(dw, CH_EN) & dwc->mask)
+		cpu_relax();
+
+	/* active_list entries will end up before queued entries */
+	list_splice_init(&dwc->queue, &list);
+	list_splice_init(&dwc->active_list, &list);
+
+	spin_unlock_bh(&dwc->lock);
+
+	/* Flush all pending and queued descriptors */
+	list_for_each_entry_safe(desc, _desc, &list, desc_node)
+		dwc_descriptor_complete(dwc, desc);
+}
+
+static enum dma_status
+dwc_is_tx_complete(struct dma_chan *chan,
+		dma_cookie_t cookie,
+		dma_cookie_t *done, dma_cookie_t *used)
+{
+	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+	dma_cookie_t		last_used;
+	dma_cookie_t		last_complete;
+	int			ret;
+
+	last_complete = dwc->completed;
+	last_used = chan->cookie;
+
+	ret = dma_async_is_complete(cookie, last_complete, last_used);
+	if (ret != DMA_SUCCESS) {
+		dwc_scan_descriptors(to_dw_dma(chan->device), dwc);
+
+		last_complete = dwc->completed;
+		last_used = chan->cookie;
+
+		ret = dma_async_is_complete(cookie, last_complete, last_used);
+	}
+
+	if (done)
+		*done = last_complete;
+	if (used)
+		*used = last_used;
+
+	return ret;
+}
+
+static void dwc_issue_pending(struct dma_chan *chan)
+{
+	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+
+	spin_lock_bh(&dwc->lock);
+	if (!list_empty(&dwc->queue))
+		dwc_scan_descriptors(to_dw_dma(chan->device), dwc);
+	spin_unlock_bh(&dwc->lock);
+}
+
+static int dwc_alloc_chan_resources(struct dma_chan *chan,
+		struct dma_client *client)
+{
+	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+	struct dw_dma		*dw = to_dw_dma(chan->device);
+	struct dw_desc		*desc;
+	struct dma_slave	*slave;
+	struct dw_dma_slave	*dws;
+	int			i;
+	u32			cfghi;
+	u32			cfglo;
+
+	dev_vdbg(&chan->dev, "alloc_chan_resources\n");
+
+	/* Channels doing slave DMA can only handle one client. */
+	if (dwc->dws || client->slave) {
+		if (chan->client_count)
+			return -EBUSY;
+	}
+
+	/* ASSERT:  channel is idle */
+	if (dma_readl(dw, CH_EN) & dwc->mask) {
+		dev_dbg(&chan->dev, "DMA channel not idle?\n");
+		return -EIO;
+	}
+
+	dwc->completed = chan->cookie = 1;
+
+	cfghi = DWC_CFGH_FIFO_MODE;
+	cfglo = 0;
+
+	slave = client->slave;
+	if (slave) {
+		/*
+		 * We need controller-specific data to set up slave
+		 * transfers.
+		 */
+		BUG_ON(!slave->dma_dev || slave->dma_dev != dw->dma.dev);
+
+		dws = container_of(slave, struct dw_dma_slave, slave);
+
+		dwc->dws = dws;
+		cfghi = dws->cfg_hi;
+		cfglo = dws->cfg_lo;
+	} else {
+		dwc->dws = NULL;
+	}
+
+	channel_writel(dwc, CFG_LO, cfglo);
+	channel_writel(dwc, CFG_HI, cfghi);
+
+	/*
+	 * NOTE: some controllers may have additional features that we
+	 * need to initialize here, like "scatter-gather" (which
+	 * doesn't mean what you think it means), and status writeback.
+	 */
+
+	spin_lock_bh(&dwc->lock);
+	i = dwc->descs_allocated;
+	while (dwc->descs_allocated < NR_DESCS_PER_CHANNEL) {
+		spin_unlock_bh(&dwc->lock);
+
+		desc = kzalloc(sizeof(struct dw_desc), GFP_KERNEL);
+		if (!desc) {
+			dev_info(&chan->dev,
+				"only allocated %d descriptors\n", i);
+			spin_lock_bh(&dwc->lock);
+			break;
+		}
+
+		dma_async_tx_descriptor_init(&desc->txd, chan);
+		desc->txd.tx_submit = dwc_tx_submit;
+		desc->txd.flags = DMA_CTRL_ACK;
+		INIT_LIST_HEAD(&desc->txd.tx_list);
+		desc->txd.phys = dma_map_single(chan->dev.parent, &desc->lli,
+				sizeof(desc->lli), DMA_TO_DEVICE);
+		dwc_desc_put(dwc, desc);
+
+		spin_lock_bh(&dwc->lock);
+		i = ++dwc->descs_allocated;
+	}
+
+	/* Enable interrupts */
+	channel_set_bit(dw, MASK.XFER, dwc->mask);
+	channel_set_bit(dw, MASK.BLOCK, dwc->mask);
+	channel_set_bit(dw, MASK.ERROR, dwc->mask);
+
+	spin_unlock_bh(&dwc->lock);
+
+	dev_dbg(&chan->dev,
+		"alloc_chan_resources allocated %d descriptors\n", i);
+
+	return i;
+}
+
+static void dwc_free_chan_resources(struct dma_chan *chan)
+{
+	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
+	struct dw_dma		*dw = to_dw_dma(chan->device);
+	struct dw_desc		*desc, *_desc;
+	LIST_HEAD(list);
+
+	dev_dbg(&chan->dev, "free_chan_resources (descs allocated=%u)\n",
+			dwc->descs_allocated);
+
+	/* ASSERT:  channel is idle */
+	BUG_ON(!list_empty(&dwc->active_list));
+	BUG_ON(!list_empty(&dwc->queue));
+	BUG_ON(dma_readl(to_dw_dma(chan->device), CH_EN) & dwc->mask);
+
+	spin_lock_bh(&dwc->lock);
+	list_splice_init(&dwc->free_list, &list);
+	dwc->descs_allocated = 0;
+	dwc->dws = NULL;
+
+	/* Disable interrupts */
+	channel_clear_bit(dw, MASK.XFER, dwc->mask);
+	channel_clear_bit(dw, MASK.BLOCK, dwc->mask);
+	channel_clear_bit(dw, MASK.ERROR, dwc->mask);
+
+	spin_unlock_bh(&dwc->lock);
+
+	list_for_each_entry_safe(desc, _desc, &list, desc_node) {
+		dev_vdbg(&chan->dev, "  freeing descriptor %p\n", desc);
+		dma_unmap_single(chan->dev.parent, desc->txd.phys,
+				sizeof(desc->lli), DMA_TO_DEVICE);
+		kfree(desc);
+	}
+
+	dev_vdbg(&chan->dev, "free_chan_resources done\n");
+}
+
+/*----------------------------------------------------------------------*/
+
+static void dw_dma_off(struct dw_dma *dw)
+{
+	dma_writel(dw, CFG, 0);
+
+	channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.BLOCK, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.SRC_TRAN, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.DST_TRAN, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.ERROR, dw->all_chan_mask);
+
+	while (dma_readl(dw, CFG) & DW_CFG_DMA_EN)
+		cpu_relax();
+}
+
+static int __init dw_probe(struct platform_device *pdev)
+{
+	struct dw_dma_platform_data *pdata;
+	struct resource		*io;
+	struct dw_dma		*dw;
+	size_t			size;
+	int			irq;
+	int			err;
+	int			i;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata || pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS)
+		return -EINVAL;
+
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!io)
+		return -EINVAL;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	size = sizeof(struct dw_dma);
+	size += pdata->nr_channels * sizeof(struct dw_dma_chan);
+	dw = kzalloc(size, GFP_KERNEL);
+	if (!dw)
+		return -ENOMEM;
+
+	if (!request_mem_region(io->start, DW_REGLEN, pdev->dev.driver->name)) {
+		err = -EBUSY;
+		goto err_kfree;
+	}
+
+	memset(dw, 0, sizeof *dw);
+
+	dw->regs = ioremap(io->start, DW_REGLEN);
+	if (!dw->regs) {
+		err = -ENOMEM;
+		goto err_release_r;
+	}
+
+	dw->clk = clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(dw->clk)) {
+		err = PTR_ERR(dw->clk);
+		goto err_clk;
+	}
+	clk_enable(dw->clk);
+
+	/* force dma off, just in case */
+	dw_dma_off(dw);
+
+	err = request_irq(irq, dw_dma_interrupt, 0, "dw_dmac", dw);
+	if (err)
+		goto err_irq;
+
+	platform_set_drvdata(pdev, dw);
+
+	tasklet_init(&dw->tasklet, dw_dma_tasklet, (unsigned long)dw);
+
+	dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
+
+	INIT_LIST_HEAD(&dw->dma.channels);
+	for (i = 0; i < pdata->nr_channels; i++, dw->dma.chancnt++) {
+		struct dw_dma_chan	*dwc = &dw->chan[i];
+
+		dwc->chan.device = &dw->dma;
+		dwc->chan.cookie = dwc->completed = 1;
+		dwc->chan.chan_id = i;
+		list_add_tail(&dwc->chan.device_node, &dw->dma.channels);
+
+		dwc->ch_regs = &__dw_regs(dw)->CHAN[i];
+		spin_lock_init(&dwc->lock);
+		dwc->mask = 1 << i;
+
+		INIT_LIST_HEAD(&dwc->active_list);
+		INIT_LIST_HEAD(&dwc->queue);
+		INIT_LIST_HEAD(&dwc->free_list);
+
+		channel_clear_bit(dw, CH_EN, dwc->mask);
+	}
+
+	/* Clear/disable all interrupts on all channels. */
+	dma_writel(dw, CLEAR.XFER, dw->all_chan_mask);
+	dma_writel(dw, CLEAR.BLOCK, dw->all_chan_mask);
+	dma_writel(dw, CLEAR.SRC_TRAN, dw->all_chan_mask);
+	dma_writel(dw, CLEAR.DST_TRAN, dw->all_chan_mask);
+	dma_writel(dw, CLEAR.ERROR, dw->all_chan_mask);
+
+	channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.BLOCK, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.SRC_TRAN, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.DST_TRAN, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.ERROR, dw->all_chan_mask);
+
+	dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
+	dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
+	dw->dma.dev = &pdev->dev;
+	dw->dma.device_alloc_chan_resources = dwc_alloc_chan_resources;
+	dw->dma.device_free_chan_resources = dwc_free_chan_resources;
+
+	dw->dma.device_prep_dma_memcpy = dwc_prep_dma_memcpy;
+
+	dw->dma.device_prep_slave_sg = dwc_prep_slave_sg;
+	dw->dma.device_terminate_all = dwc_terminate_all;
+
+	dw->dma.device_is_tx_complete = dwc_is_tx_complete;
+	dw->dma.device_issue_pending = dwc_issue_pending;
+
+	dma_writel(dw, CFG, DW_CFG_DMA_EN);
+
+	printk(KERN_INFO "%s: DesignWare DMA Controller, %d channels\n",
+			pdev->dev.bus_id, dw->dma.chancnt);
+
+	dma_async_device_register(&dw->dma);
+
+	return 0;
+
+err_irq:
+	clk_disable(dw->clk);
+	clk_put(dw->clk);
+err_clk:
+	iounmap(dw->regs);
+	dw->regs = NULL;
+err_release_r:
+	release_resource(io);
+err_kfree:
+	kfree(dw);
+	return err;
+}
+
+static int __exit dw_remove(struct platform_device *pdev)
+{
+	struct dw_dma		*dw = platform_get_drvdata(pdev);
+	struct dw_dma_chan	*dwc, *_dwc;
+	struct resource		*io;
+
+	dw_dma_off(dw);
+	dma_async_device_unregister(&dw->dma);
+
+	free_irq(platform_get_irq(pdev, 0), dw);
+	tasklet_kill(&dw->tasklet);
+
+	list_for_each_entry_safe(dwc, _dwc, &dw->dma.channels,
+			chan.device_node) {
+		list_del(&dwc->chan.device_node);
+		channel_clear_bit(dw, CH_EN, dwc->mask);
+	}
+
+	clk_disable(dw->clk);
+	clk_put(dw->clk);
+
+	iounmap(dw->regs);
+	dw->regs = NULL;
+
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(io->start, DW_REGLEN);
+
+	kfree(dw);
+
+	return 0;
+}
+
+static void dw_shutdown(struct platform_device *pdev)
+{
+	struct dw_dma	*dw = platform_get_drvdata(pdev);
+
+	dw_dma_off(platform_get_drvdata(pdev));
+	clk_disable(dw->clk);
+}
+
+static int dw_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct dw_dma	*dw = platform_get_drvdata(pdev);
+
+	dw_dma_off(platform_get_drvdata(pdev));
+	clk_disable(dw->clk);
+	return 0;
+}
+
+static int dw_resume_early(struct platform_device *pdev)
+{
+	struct dw_dma	*dw = platform_get_drvdata(pdev);
+
+	clk_enable(dw->clk);
+	dma_writel(dw, CFG, DW_CFG_DMA_EN);
+	return 0;
+
+}
+
+static struct platform_driver dw_driver = {
+	.remove		= __exit_p(dw_remove),
+	.shutdown	= dw_shutdown,
+	.suspend_late	= dw_suspend_late,
+	.resume_early	= dw_resume_early,
+	.driver = {
+		.name	= "dw_dmac",
+	},
+};
+
+static int __init dw_init(void)
+{
+	return platform_driver_probe(&dw_driver, dw_probe);
+}
+module_init(dw_init);
+
+static void __exit dw_exit(void)
+{
+	platform_driver_unregister(&dw_driver);
+}
+module_exit(dw_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
+MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
new file mode 100644
index 00000000000..00fdd187bb0
--- /dev/null
+++ b/drivers/dma/dw_dmac_regs.h
@@ -0,0 +1,225 @@
+/*
+ * Driver for the Synopsys DesignWare AHB DMA Controller
+ *
+ * Copyright (C) 2005-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/dw_dmac.h>
+
+#define DW_DMA_MAX_NR_CHANNELS	8
+
+/*
+ * Redefine this macro to handle differences between 32- and 64-bit
+ * addressing, big vs. little endian, etc.
+ */
+#define DW_REG(name)		u32 name; u32 __pad_##name
+
+/* Hardware register definitions. */
+struct dw_dma_chan_regs {
+	DW_REG(SAR);		/* Source Address Register */
+	DW_REG(DAR);		/* Destination Address Register */
+	DW_REG(LLP);		/* Linked List Pointer */
+	u32	CTL_LO;		/* Control Register Low */
+	u32	CTL_HI;		/* Control Register High */
+	DW_REG(SSTAT);
+	DW_REG(DSTAT);
+	DW_REG(SSTATAR);
+	DW_REG(DSTATAR);
+	u32	CFG_LO;		/* Configuration Register Low */
+	u32	CFG_HI;		/* Configuration Register High */
+	DW_REG(SGR);
+	DW_REG(DSR);
+};
+
+struct dw_dma_irq_regs {
+	DW_REG(XFER);
+	DW_REG(BLOCK);
+	DW_REG(SRC_TRAN);
+	DW_REG(DST_TRAN);
+	DW_REG(ERROR);
+};
+
+struct dw_dma_regs {
+	/* per-channel registers */
+	struct dw_dma_chan_regs	CHAN[DW_DMA_MAX_NR_CHANNELS];
+
+	/* irq handling */
+	struct dw_dma_irq_regs	RAW;		/* r */
+	struct dw_dma_irq_regs	STATUS;		/* r (raw & mask) */
+	struct dw_dma_irq_regs	MASK;		/* rw (set = irq enabled) */
+	struct dw_dma_irq_regs	CLEAR;		/* w (ack, affects "raw") */
+
+	DW_REG(STATUS_INT);			/* r */
+
+	/* software handshaking */
+	DW_REG(REQ_SRC);
+	DW_REG(REQ_DST);
+	DW_REG(SGL_REQ_SRC);
+	DW_REG(SGL_REQ_DST);
+	DW_REG(LAST_SRC);
+	DW_REG(LAST_DST);
+
+	/* miscellaneous */
+	DW_REG(CFG);
+	DW_REG(CH_EN);
+	DW_REG(ID);
+	DW_REG(TEST);
+
+	/* optional encoded params, 0x3c8..0x3 */
+};
+
+/* Bitfields in CTL_LO */
+#define DWC_CTLL_INT_EN		(1 << 0)	/* irqs enabled? */
+#define DWC_CTLL_DST_WIDTH(n)	((n)<<1)	/* bytes per element */
+#define DWC_CTLL_SRC_WIDTH(n)	((n)<<4)
+#define DWC_CTLL_DST_INC	(0<<7)		/* DAR update/not */
+#define DWC_CTLL_DST_DEC	(1<<7)
+#define DWC_CTLL_DST_FIX	(2<<7)
+#define DWC_CTLL_SRC_INC	(0<<7)		/* SAR update/not */
+#define DWC_CTLL_SRC_DEC	(1<<9)
+#define DWC_CTLL_SRC_FIX	(2<<9)
+#define DWC_CTLL_DST_MSIZE(n)	((n)<<11)	/* burst, #elements */
+#define DWC_CTLL_SRC_MSIZE(n)	((n)<<14)
+#define DWC_CTLL_S_GATH_EN	(1 << 17)	/* src gather, !FIX */
+#define DWC_CTLL_D_SCAT_EN	(1 << 18)	/* dst scatter, !FIX */
+#define DWC_CTLL_FC_M2M		(0 << 20)	/* mem-to-mem */
+#define DWC_CTLL_FC_M2P		(1 << 20)	/* mem-to-periph */
+#define DWC_CTLL_FC_P2M		(2 << 20)	/* periph-to-mem */
+#define DWC_CTLL_FC_P2P		(3 << 20)	/* periph-to-periph */
+/* plus 4 transfer types for peripheral-as-flow-controller */
+#define DWC_CTLL_DMS(n)		((n)<<23)	/* dst master select */
+#define DWC_CTLL_SMS(n)		((n)<<25)	/* src master select */
+#define DWC_CTLL_LLP_D_EN	(1 << 27)	/* dest block chain */
+#define DWC_CTLL_LLP_S_EN	(1 << 28)	/* src block chain */
+
+/* Bitfields in CTL_HI */
+#define DWC_CTLH_DONE		0x00001000
+#define DWC_CTLH_BLOCK_TS_MASK	0x00000fff
+
+/* Bitfields in CFG_LO. Platform-configurable bits are in <linux/dw_dmac.h> */
+#define DWC_CFGL_CH_SUSP	(1 << 8)	/* pause xfer */
+#define DWC_CFGL_FIFO_EMPTY	(1 << 9)	/* pause xfer */
+#define DWC_CFGL_HS_DST		(1 << 10)	/* handshake w/dst */
+#define DWC_CFGL_HS_SRC		(1 << 11)	/* handshake w/src */
+#define DWC_CFGL_MAX_BURST(x)	((x) << 20)
+#define DWC_CFGL_RELOAD_SAR	(1 << 30)
+#define DWC_CFGL_RELOAD_DAR	(1 << 31)
+
+/* Bitfields in CFG_HI. Platform-configurable bits are in <linux/dw_dmac.h> */
+#define DWC_CFGH_DS_UPD_EN	(1 << 5)
+#define DWC_CFGH_SS_UPD_EN	(1 << 6)
+
+/* Bitfields in SGR */
+#define DWC_SGR_SGI(x)		((x) << 0)
+#define DWC_SGR_SGC(x)		((x) << 20)
+
+/* Bitfields in DSR */
+#define DWC_DSR_DSI(x)		((x) << 0)
+#define DWC_DSR_DSC(x)		((x) << 20)
+
+/* Bitfields in CFG */
+#define DW_CFG_DMA_EN		(1 << 0)
+
+#define DW_REGLEN		0x400
+
+struct dw_dma_chan {
+	struct dma_chan		chan;
+	void __iomem		*ch_regs;
+	u8			mask;
+
+	spinlock_t		lock;
+
+	/* these other elements are all protected by lock */
+	dma_cookie_t		completed;
+	struct list_head	active_list;
+	struct list_head	queue;
+	struct list_head	free_list;
+
+	struct dw_dma_slave	*dws;
+
+	unsigned int		descs_allocated;
+};
+
+static inline struct dw_dma_chan_regs __iomem *
+__dwc_regs(struct dw_dma_chan *dwc)
+{
+	return dwc->ch_regs;
+}
+
+#define channel_readl(dwc, name) \
+	__raw_readl(&(__dwc_regs(dwc)->name))
+#define channel_writel(dwc, name, val) \
+	__raw_writel((val), &(__dwc_regs(dwc)->name))
+
+static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct dw_dma_chan, chan);
+}
+
+
+struct dw_dma {
+	struct dma_device	dma;
+	void __iomem		*regs;
+	struct tasklet_struct	tasklet;
+	struct clk		*clk;
+
+	u8			all_chan_mask;
+
+	struct dw_dma_chan	chan[0];
+};
+
+static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
+{
+	return dw->regs;
+}
+
+#define dma_readl(dw, name) \
+	__raw_readl(&(__dw_regs(dw)->name))
+#define dma_writel(dw, name, val) \
+	__raw_writel((val), &(__dw_regs(dw)->name))
+
+#define channel_set_bit(dw, reg, mask) \
+	dma_writel(dw, reg, ((mask) << 8) | (mask))
+#define channel_clear_bit(dw, reg, mask) \
+	dma_writel(dw, reg, ((mask) << 8) | 0)
+
+static inline struct dw_dma *to_dw_dma(struct dma_device *ddev)
+{
+	return container_of(ddev, struct dw_dma, dma);
+}
+
+/* LLI == Linked List Item; a.k.a. DMA block descriptor */
+struct dw_lli {
+	/* values that are not changed by hardware */
+	dma_addr_t	sar;
+	dma_addr_t	dar;
+	dma_addr_t	llp;		/* chain to next lli */
+	u32		ctllo;
+	/* values that may get written back: */
+	u32		ctlhi;
+	/* sstat and dstat can snapshot peripheral register state.
+	 * silicon config may discard either or both...
+	 */
+	u32		sstat;
+	u32		dstat;
+};
+
+struct dw_desc {
+	/* FIRST values the hardware uses */
+	struct dw_lli			lli;
+
+	/* THEN values for driver housekeeping */
+	struct list_head		desc_node;
+	struct dma_async_tx_descriptor	txd;
+	size_t				len;
+};
+
+static inline struct dw_desc *
+txd_to_dw_desc(struct dma_async_tx_descriptor *txd)
+{
+	return container_of(txd, struct dw_desc, txd);
+}
diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
index 31e48b0e732..d18a3053be0 100644
--- a/include/asm-avr32/arch-at32ap/at32ap700x.h
+++ b/include/asm-avr32/arch-at32ap/at32ap700x.h
@@ -30,4 +30,20 @@
 #define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
 #define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
 
+
+/*
+ * DMAC peripheral hardware handshaking interfaces, used with dw_dmac
+ */
+#define DMAC_MCI_RX		0
+#define DMAC_MCI_TX		1
+#define DMAC_DAC_TX		2
+#define DMAC_AC97_A_RX		3
+#define DMAC_AC97_A_TX		4
+#define DMAC_AC97_B_RX		5
+#define DMAC_AC97_B_TX		6
+#define DMAC_DMAREQ_0		7
+#define DMAC_DMAREQ_1		8
+#define DMAC_DMAREQ_2		9
+#define DMAC_DMAREQ_3		10
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
new file mode 100644
index 00000000000..04d217b442b
--- /dev/null
+++ b/include/linux/dw_dmac.h
@@ -0,0 +1,62 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller (aka DMACA on
+ * AVR32 systems.)
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef DW_DMAC_H
+#define DW_DMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct dw_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ */
+struct dw_dma_platform_data {
+	unsigned int	nr_channels;
+};
+
+/**
+ * struct dw_dma_slave - Controller-specific information about a slave
+ * @slave: Generic information about the slave
+ * @ctl_lo: Platform-specific initializer for the CTL_LO register
+ * @cfg_hi: Platform-specific initializer for the CFG_HI register
+ * @cfg_lo: Platform-specific initializer for the CFG_LO register
+ */
+struct dw_dma_slave {
+	struct dma_slave	slave;
+	u32			cfg_hi;
+	u32			cfg_lo;
+};
+
+/* Platform-configurable bits in CFG_HI */
+#define DWC_CFGH_FCMODE		(1 << 0)
+#define DWC_CFGH_FIFO_MODE	(1 << 1)
+#define DWC_CFGH_PROTCTL(x)	((x) << 2)
+#define DWC_CFGH_SRC_PER(x)	((x) << 7)
+#define DWC_CFGH_DST_PER(x)	((x) << 11)
+
+/* Platform-configurable bits in CFG_LO */
+#define DWC_CFGL_PRIO(x)	((x) << 5)	/* priority */
+#define DWC_CFGL_LOCK_CH_XFER	(0 << 12)	/* scope of LOCK_CH */
+#define DWC_CFGL_LOCK_CH_BLOCK	(1 << 12)
+#define DWC_CFGL_LOCK_CH_XACT	(2 << 12)
+#define DWC_CFGL_LOCK_BUS_XFER	(0 << 14)	/* scope of LOCK_BUS */
+#define DWC_CFGL_LOCK_BUS_BLOCK	(1 << 14)
+#define DWC_CFGL_LOCK_BUS_XACT	(2 << 14)
+#define DWC_CFGL_LOCK_CH	(1 << 15)	/* channel lockout */
+#define DWC_CFGL_LOCK_BUS	(1 << 16)	/* busmaster lockout */
+#define DWC_CFGL_HS_DST_POL	(1 << 18)	/* dst handshake active low */
+#define DWC_CFGL_HS_SRC_POL	(1 << 19)	/* src handshake active low */
+
+static inline struct dw_dma_slave *to_dw_dma_slave(struct dma_slave *slave)
+{
+	return container_of(slave, struct dw_dma_slave, slave);
+}
+
+#endif /* DW_DMAC_H */
-- 
cgit v1.2.3


From e172274ccc55d20536fbdceb6131f38e288541e0 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <lg@denx.de>
Date: Fri, 13 Jun 2008 09:17:31 +0100
Subject: [ARM] 5088/3: pxa2xx: add pxa2xx_set_spi_info to register pxa2xx-spi
 platform devices

Add a function to dynamically allocate and register pxa2xx-spi platform
devices, to be used by PXA2xx and PXA3xx based systems. Switch pcm027 and
lubbock to use it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig             |  1 +
 arch/arm/mach-pxa/devices.c           | 18 ++++++++++++++++++
 arch/arm/mach-pxa/lubbock.c           | 10 +---------
 arch/arm/mach-pxa/pcm027.c            | 31 +++++++++++++++++++++++++++++++
 include/asm-arm/arch-pxa/pxa2xx_spi.h |  2 ++
 5 files changed, 53 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 914bb33dab9..ef7271e3781 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -139,6 +139,7 @@ config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
+	select PXA_SSP
 
 endmenu
 
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a6f2390ce66..abc161dd083 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -13,6 +13,7 @@
 #include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa2xx_spi.h>
 #include <asm/arch/camera.h>
 #include <asm/arch/audio.h>
 
@@ -831,3 +832,20 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
 }
 
 #endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+	struct platform_device *pd;
+
+	pd = platform_device_alloc("pxa2xx-spi", id);
+	if (pd == NULL) {
+		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+		       id);
+		return;
+	}
+
+	pd->dev.platform_data = info;
+	platform_device_add(pd);
+}
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a3fae413920..e041cceab16 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -226,14 +226,6 @@ static struct pxa2xx_spi_master pxa_ssp_master_info = {
 	.num_chipselect	= 0,
 };
 
-static struct platform_device pxa_ssp = {
-	.name		= "pxa2xx-spi",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &pxa_ssp_master_info,
-	},
-};
-
 static int lubbock_ads7846_pendown_state(void)
 {
 	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
@@ -367,7 +359,6 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
-	&pxa_ssp,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -501,6 +492,7 @@ static void __init lubbock_init(void)
 	lubbock_flash_data[flashboot].name = "boot-rom";
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 3b945eb0aee..377f3be8ce5 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -24,7 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
 #include <linux/leds.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/arch/hardware.h>
@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+	.base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "max7301",
+		.platform_data	= &max7301_info,
+		.max_speed_hz	= 13000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+/*
+ * NOR flash
+ */
 static struct physmap_flash_data pcm027_flash_data = {
 	.width  = 4,
 };
@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
 	pcm990_baseboard_init();
 #endif
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static void __init pcm027_map_io(void)
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h
index 3459fb26ce9..2206cb61a9f 100644
--- a/include/asm-arm/arch-pxa/pxa2xx_spi.h
+++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h
@@ -41,4 +41,6 @@ struct pxa2xx_spi_chip {
 	void (*cs_control)(u32 command);
 };
 
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
 #endif /*PXA2XX_SPI_H_*/
-- 
cgit v1.2.3


From c7b4f5ba07a16d2c84ac6cc312488cc6cc0db518 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Tue, 1 Jul 2008 15:45:10 +0100
Subject: [ARM] 5142/1: pxa: move move zaurus declarations to proper place

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig | 102 +++++++++++++++++++++++-----------------------
 1 file changed, 51 insertions(+), 51 deletions(-)

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index ef7271e3781..01d23e5717a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -58,6 +58,57 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+	select PXA_SSP
+
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
+
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -199,57 +250,6 @@ endif
 
 endmenu
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select SHARP_LOCOMO
-	select PXA_SSP
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-
 config PXA25x
 	bool
 	help
-- 
cgit v1.2.3


From c0b8556f2f8146bd38324b14b1ce00f249ba8ed9 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 2 Jul 2008 13:50:09 +0100
Subject: [ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one 
 unnecessary menu level

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig | 48 ++++++++++-------------------------------------
 1 file changed, 10 insertions(+), 38 deletions(-)

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 01d23e5717a..faa2c3f6c1a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -20,14 +20,17 @@ endmenu
 
 endif
 
-menu "Select target boards"
-
 config ARCH_GUMSTIX
 	bool "Gumstix XScale boards"
 	help
 	  Say Y here if you intend to run this kernel on a
 	  Gumstix Full Function Minature Computer.
 
+config MACH_GUMSTIX_F
+	bool "Basix, Connex, ws-200ax, ws-400ax systems"
+	depends on ARCH_GUMSTIX
+	select PXA25x
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -157,6 +160,10 @@ config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	select PXA27x
 
+config MACH_TRIZEPS4_CONXS
+	bool "ConXS Eval Board"
+	depends on MACH_TRIZEPS4
+
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
@@ -192,17 +199,10 @@ config MACH_PCM027
 	select IWMMXT
 	select PXA_SSP
 
-endmenu
-
-choice
-	prompt "Used baseboard"
-	depends on MACH_PCM027
-
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
-
-endchoice
+	depends on MACH_PCM027
 
 choice
 	prompt "display on pcm990"
@@ -219,34 +219,6 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
-if ARCH_GUMSTIX
-
-choice
-	prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
-	bool "Basix, Connex, ws-200ax, ws-400ax systems"
-	select PXA25x
-
-endchoice
-
-endif
-
-
-if MACH_TRIZEPS4
-
-choice
-	prompt "Select base board for Trizeps 4 module"
-
-config MACH_TRIZEPS4_CONXS
-	bool "ConXS Eval Board"
-
-config MACH_TRIZEPS4_ANY
-	bool "another Board"
-
-endchoice
-
-endif
 
 endmenu
 
-- 
cgit v1.2.3


From 6a566fbbcc902df6c9c4dc151bf399018083fb10 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon, 16 Jun 2008 08:16:46 +0100
Subject: [ARM] 5095/2: pcm990: switch from pxa_gpio_mode to pxa2xx_mfp_config

pxa_gpio_mode() is deprecated, use the new pxa2xx_mfp_config() function to
configure GPIOs in pcm990 platform code. Convert "array, ARRAY_SIZE(array)"
to "ARRAY_AND_SIZE(array)" while at it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/pcm990-baseboard.c | 74 ++++++++++++++++++++----------------
 1 file changed, 41 insertions(+), 33 deletions(-)

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 5d87c7c866e..30023b00e47 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -33,14 +33,30 @@
 #include <asm/arch/camera.h>
 #include <asm/mach/map.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pcm990_baseboard.h>
 #include <asm/arch/pxafb.h>
+#include <asm/arch/mfp-pxa27x.h>
 
 #include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	/* USB */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	/* PWM0 */
+	GPIO16_PWM0_OUT,
+};
 
 /*
  * pcm990_lcd_power - control power supply to the LCD
@@ -277,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
 	int err;
 
-	/*
-	 * enable GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
 	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
 			     "MMC card detect", data);
 	if (err)
@@ -333,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
  */
 static int pcm990_ohci_init(struct device *dev)
 {
-	pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-	pxa_gpio_mode(PCM990_USB_PWR_EN);
 	/*
 	 * disable USB port 2 and 3
 	 * power sense is active low
@@ -361,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+	/* CIF */
+	GPIO98_CIF_DD_0,
+	GPIO105_CIF_DD_1,
+	GPIO104_CIF_DD_2,
+	GPIO103_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO94_CIF_DD_5,
+	GPIO93_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+	GPIO107_CIF_DD_8,
+	GPIO106_CIF_DD_9,
+	GPIO42_CIF_MCLK,
+	GPIO45_CIF_PCLK,
+	GPIO43_CIF_FV,
+	GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-	pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-	pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-	pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-	pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-	pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-	pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-	pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-	pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-	pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-	pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-	pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-	pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-	pxa_gpio_mode(GPIO43_CIF_FV_MD);
-	pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
 	return 0;
 }
 
@@ -449,8 +457,10 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
 	/* register CPLD access */
-	iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
 	/* register CPLD's IRQ controller */
 	pcm990_init_irq();
@@ -458,7 +468,6 @@ void __init pcm990_baseboard_init(void)
 #ifndef CONFIG_PCM990_DISPLAY_NONE
 	set_pxa_fb_info(&pcm990_fbinfo);
 #endif
-	pxa_gpio_mode(GPIO16_PWM0_MD);
 	platform_device_register(&pcm990_backlight_device);
 
 	/* MMC */
@@ -473,9 +482,8 @@ void __init pcm990_baseboard_init(void)
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-	i2c_register_board_info(0, pcm990_i2c_devices,
-		ARRAY_SIZE(pcm990_i2c_devices));
+	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-	printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }
-- 
cgit v1.2.3


From ff279202781c473545862918a8ef1f4ef7712e47 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Thu, 22 May 2008 10:14:21 +0100
Subject: [ARM] 5042/1: magician: request GPIOs for pda_power

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/magician.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 01b2fa79021..595e8c4902f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -511,6 +511,37 @@ static struct platform_device pasic3 = {
  * External power
  */
 
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+	ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+	if (ret)
+		goto err_chg_en;
+	ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+	if (!ret)
+		ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+	if (ret)
+		goto err_nchg_en;
+
+	return 0;
+
+err_nchg_en:
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+	return ret;
+}
+
 static int magician_is_ac_online(void)
 {
 	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -527,14 +558,24 @@ static void magician_set_charge(int flags)
 	gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
 }
 
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
 static char *magician_supplicants[] = {
 	"ds2760-battery.0", "backup-battery"
 };
 
 static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
 	.is_ac_online    = magician_is_ac_online,
 	.is_usb_online   = magician_is_usb_online,
 	.set_charge      = magician_set_charge,
+	.exit            = power_supply_exit,
 	.supplied_to     = magician_supplicants,
 	.num_supplicants = ARRAY_SIZE(magician_supplicants),
 };
-- 
cgit v1.2.3


From e181191acdfde5b1f9690c74a2459dd0a3331c62 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Sun, 22 Jun 2008 13:00:55 +0100
Subject: [ARM] 5119/1: magician: include linux/gpio.h instead of asm/gpio.h

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/magician.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 595e8c4902f..6de2c13bd65 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
@@ -27,7 +28,6 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/gpio.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-- 
cgit v1.2.3


From 7a97010eb4f47c9d2d66bfb838a8638a8d02d9ef Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Thu, 26 Jun 2008 21:03:54 +0100
Subject: [ARM] 5125/1: magician: move gpio pin configuration into __initdata
 section

The pin configuration array is only used during board init.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/magician.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 6de2c13bd65..2dc14c361c1 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -44,7 +44,7 @@
 #include "devices.h"
 #include "generic.h"
 
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
 
 	/* SDRAM and Static Memory I/O Signals */
 	GPIO20_nSDCS_2,
-- 
cgit v1.2.3


From e277479aba3d35745c822540e9c3d941aabb4e98 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Thu, 26 Jun 2008 21:04:31 +0100
Subject: [ARM] 5126/1: magician: remove superfluous mtd includes

These were only needed for hardcoded flash partition tables, which were
never submitted. It is better to have the bootloader pass the partition
table to the kernel instead.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/magician.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 2dc14c361c1..9f249dc726e 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -22,8 +22,6 @@
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
-- 
cgit v1.2.3


From d0f7f1dff01698d228dc108895fbb9b13af37dab Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Mon, 30 Jun 2008 18:11:35 +0100
Subject: [ARM] 5137/1: magician: MACH_MAGICIAN doesn't need to depend on
 ARCH_PXA

It is only defined inside an "if ARCH_PXA ... endif" block, so the
depends on is not needed.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>?
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index faa2c3f6c1a..61a131fd44a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -189,7 +189,6 @@ config MACH_ARMCORE
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	depends on ARCH_PXA
 	select PXA27x
 	select IWMMXT
 
-- 
cgit v1.2.3


From 14d1012db8462bbb7139ac4622f92e541d3019d1 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Mon, 30 Jun 2008 18:11:55 +0100
Subject: [ARM] 5138/1: magician: set pwm-backlight .id = -1

There will always be only one pwm-backlight on this device.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/magician.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 9f249dc726e..bad5821be41 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -397,6 +397,7 @@ static struct platform_pwm_backlight_data backlight_data = {
 
 static struct platform_device backlight = {
 	.name = "pwm-backlight",
+	.id   = -1,
 	.dev  = {
 		.parent        = &pxa27x_device_pwm0.dev,
 		.platform_data = &backlight_data,
-- 
cgit v1.2.3


From 3c85bce6f820258b49bb74c53d2f47c058199f1b Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 16 Jun 2008 08:16:46 +0100
Subject: [ARM] 5101/2: EM-X270 updates

Convert EM-X270 pin configuration to use MFP tables and gpio library
Make device initialization dependent on respective driver CONFIG_ value (like
in zylonite)
Add keypad and gpio_key devices

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/em-x270.c | 373 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 293 insertions(+), 80 deletions(-)

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index e23865affc0..e5cc6ca63c7 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,31 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <asm/arch/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD		(105)
-#define EM_X270_ETHIRQ		IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ		IRQ_GPIO(13)
+#define GPIO41_ETHIRQ		(41)
+#define GPIO13_MMC_CD		(13)
+#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS	(11)
+#define GPIO56_NAND_RB	(56)
+
+static unsigned long em_x270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* QCI */
+	GPIO84_CIF_FV,
+	GPIO25_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO22_KP_MKOUT_7,
+
+	/* SSP1 */
+	GPIO26_SSP1_RXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO57_SSP1_TXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* power controls */
+	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO41_GPIO,	/* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
 		.start = PXA_CS2_PHYS,
 		.end   = PXA_CS2_PHYS + 3,
@@ -52,36 +180,34 @@ static struct resource em_x270_dm9k_resource[] = {
 	[2] = {
 		.start = EM_X270_ETHIRQ,
 		.end   = EM_X270_ETHIRQ,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(em_x270_dm9k_resource),
-	.resource	= em_x270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
+	.resource	= em_x270_dm9000_resource,
 	.dev		= {
-		.platform_data = &em_x270_dm9k_platdata,
+		.platform_data = &em_x270_dm9000_platdata,
 	}
 };
 
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-	.name		= "wm97xx-ts",
-	.id		= -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+	platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
 	[0] = {
 		.start = PXA_CS4_PHYS,
@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
 	}
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS	(11)
-#define GPIO_NAND_RB	(56)
+static void __init em_x270_init_rtc(void)
+{
+	platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-	GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
 	dsb();
 
-	GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+	return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
 	}
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&em_x270_dm9k,
-	&em_x270_ts,
-	&em_x270_rtc,
-	&em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+	int err;
 
+	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND CS gpio\n");
+		return;
+	}
+
+	gpio_direction_output(GPIO11_NAND_CS, 1);
+
+	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+		gpio_free(GPIO11_NAND_CS);
+		return;
+	}
+
+	gpio_direction_input(GPIO56_NAND_RB);
+
+	platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.init		= em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err;
-
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* EM-X270 uses GPIO13 as SD power enable */
-	pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-	err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			      "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
 		       __func__, err);
@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	free_irq(EM_X270_MMC_IRQ, data);
+	int irq = gpio_to_irq(GPIO13_MMC_CD);
+	free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 	.exit		= em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+	pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
 	.pixclock	= 50000,
 	.bpp		= 16,
@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
 	.modes		= &em_x270_lcd_mode,
 	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lccr0		= LCCR0_PAS,
-	.lccr3		= LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-	/* setup LCD */
 	set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
 
-	/* register EM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
 	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&em_x270_mci_platform_data);
-	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 3,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= em_x270_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+};
+
+static void __init em_x270_init_keypad(void)
+{
+	pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
 
-	/* setup STUART GPIOs */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "sleep/wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_PWR,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
 
-	/* setup BTUART GPIOs */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
 
-	/* Setup interrupt for dm9000 */
-	set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static struct platform_device em_x270_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &em_x270_gpio_keys_data,
+	},
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+	platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+	em_x270_init_dm9000();
+	em_x270_init_rtc();
+	em_x270_init_nand();
+	em_x270_init_lcd();
+	em_x270_init_mmc();
+	em_x270_init_ohci();
+	em_x270_init_keypad();
+	em_x270_init_gpio_keys();
+	em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-- 
cgit v1.2.3


From 2f01a973729712c373ccc8acde4d218c38f3029a Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 17 Jun 2008 12:29:58 +0100
Subject: [ARM] 5103/2: CM-X270: update core platform support

Convert CM-X270 pin configuration to use MFP tables.
Make device initialization dependent on respective driver CONFIG_ value (like
in zylonite).
Cleanup includes

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/cm-x270-pci.c |  27 +--
 arch/arm/mach-pxa/cm-x270-pci.h |  14 +-
 arch/arm/mach-pxa/cm-x270.c     | 405 ++++++++++++++++++++++++++++------------
 3 files changed, 307 insertions(+), 139 deletions(-)

diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 319c9ff3ab9..bcf0cde6ccc 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -5,7 +5,7 @@
  *
  * Bits taken from various places.
  *
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
 
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
 	if (machine_is_armcore()) {
-		pr_info("Adjusting zones for CM-x270\n");
+		pr_info("Adjusting zones for CM-X270\n");
 
 		/*
 		 * Only adjust if > 64M on current system
@@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+	GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
 
 	it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
 {
 	it8152_init_irq();
-	pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
-	set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
 
-	set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
-				cmx270_it8152_irq_demux);
+	cmx270_it8152_irq_gpio = irq_gpio;
+
+	set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
+
+	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
@@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	/*
 	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-x270 is
-	  unrealistic. Here we keep mapping for ATXBase and SB-x270.
+	  but defining a platform for each possible base of CM-X270 is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X270.
 	*/
 	/* ATXBASE PCI slot */
 	if (slot == 7)
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
index ffe37b66f9a..48f532f4cb5 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
 extern void __cmx270_pci_suspend(void);
 extern void __cmx270_pci_resume(void);
 
 #ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
 #else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
 #endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index b3c3fd72d04..402e807eae5 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-pxa/cm-x270.c
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,44 +9,156 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
 #include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
 #include <video/mbxfb.h>
+#include <linux/leds.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
 
 #include <asm/hardware/it8152.h>
 
 #include "generic.h"
 #include "cm-x270-pci.h"
 
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE	(0xe8000000)
+#define CMX270_IT8152_VIRT	(CMX270_VIRT_BASE)
+
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
 #define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
 
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ		(10)
+#define GPIO22_IT8152_IRQ	(22)
+#define GPIO83_MMC_IRQ		(83)
+#define GPIO95_GFXIRQ		(95)
+
+#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ	IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ		IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER	(105)
+
+static unsigned long cmx270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
+	GPIO53_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO89_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO10_GPIO,	/* DM9000 interrupt */
+	GPIO83_GPIO,	/* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
 	[0] = {
 		.start = DM9000_PHYS_BASE,
 		.end   = DM9000_PHYS_BASE + 4,
@@ -60,35 +172,49 @@ static struct resource cmx270_dm9k_resource[] = {
 	[2] = {
 		.start = CMX270_ETHIRQ,
 		.end   = CMX270_ETHIRQ,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9k_resource),
-	.resource	= cmx270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
+	.resource	= cmx270_dm9000_resource,
 	.dev		= {
-		.platform_data = &cmx270_dm9k_platdata,
+		.platform_data = &cmx270_dm9000_platdata,
 	}
 };
 
-/* touchscreen controller */
+static void __init cmx270_init_dm9000(void)
+{
+	platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 static struct platform_device cmx270_ts_device = {
 	.name		= "ucb1400_ts",
 	.id		= -1,
 };
 
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+	platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
 	[0] = {
 		.start = RTC_PHYS_BASE,
@@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
 	}
 };
 
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+	platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+	[0] = {
+		.name = "cm-x270:red",
+		.default_trigger = "nand-disk",
+		.gpio = 93,
+		.active_low = 1,
+	},
+	[1] = {
+		.name = "cm-x270:green",
+		.default_trigger = "heartbeat",
+		.gpio = 94,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cmx270_leds),
+	.leds = cmx270_leds,
+};
+
 static struct platform_device cmx270_led_device = {
-	.name		= "cm-x270-led",
+	.name		= "leds-gpio",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx270_gpio_led_pdata,
+	},
 };
 
+static void __init cmx270_init_leds(void)
+{
+	platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
 /* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
 
 static struct resource cmx270_2700G_resource[] = {
 	/* frame buffer memory including ODFB and External SDRAM */
 	[0] = {
-		.start = MARATHON_PHYS,
-		.end   = MARATHON_PHYS + 0x02000000,
+		.start = PXA_CS2_PHYS,
+		.end   = PXA_CS2_PHYS + 0x01ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 	/* Marathon registers */
 	[1] = {
-		.start = MARATHON_PHYS + 0x03fe0000,
-		.end   = MARATHON_PHYS + 0x03ffffff,
+		.start = PXA_CS2_PHYS + 0x03fe0000,
+		.end   = PXA_CS2_PHYS + 0x03ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
 	.id		= -1,
 };
 
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
-	.name = "pata_cm_x270",
-	.id = -1,
-	.dev		= {
-		.dma_mask	= &ata_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&cmx270_device_dm9k,
-	&cmx270_rtc_device,
-	&cmx270_2700G,
-	&cmx270_led_device,
-	&cmx270_ts_device,
-	&cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-	[0] = { /* IDE/general purpose space */
-		.virtual	= CMX270_IDE104_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IDE104_PHYS),
-		.length		= SZ_64M - SZ_8M,
-		.type		= MT_DEVICE
-	},
-	[1] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IT8152_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
+static void __init cmx270_init_2700G(void)
+{
+	platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /*
   Display definitions
   keep these for backwards compatibility, although symbolic names (as
@@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
 */
 __setup("monitor=", cmx270_set_display);
 
+static void __init cmx270_init_display(void)
+{
+	set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cmx270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 	.init		= cmx270_ohci_init,
 };
 
+static void __init cmx270_init_ohci(void)
+{
+	pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
 
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int cmx270_mci_init(struct device *dev,
 			   irq_handler_t cmx270_detect_int,
 			   void *data)
 {
 	int err;
 
-	/*
-	 * setup GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* SB-X270 uses GPIO105 as SD power enable */
-	pxa_gpio_mode(105 | GPIO_OUT);
+	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+	if (err) {
+		dev_warn(dev, "power gpio unavailable\n");
+		return err;
+	}
 
-	/* card detect IRQ on GPIO 83 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+	gpio_direction_output(GPIO105_MMC_POWER, 0);
 
 	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
-		       " request MMC card detect IRQ\n");
+	if (err) {
+		gpio_free(GPIO105_MMC_POWER);
+		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+			" request MMC card detect IRQ\n");
+	}
 
 	return err;
 }
@@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data *p_d = dev->platform_data;
 
 	if ((1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		GPCR(105) = GPIO_bit(105);
+		dev_dbg(dev, "power on\n");
+		gpio_set_value(GPIO105_MMC_POWER, 0);
 	} else {
-		GPSR(105) = GPIO_bit(105);
-		printk(KERN_DEBUG "%s: off\n", __func__);
+		gpio_set_value(GPIO105_MMC_POWER, 1);
+		dev_dbg(dev, "power off\n");
 	}
 }
 
 static void cmx270_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CMX270_MMC_IRQ, data);
+	gpio_free(GPIO105_MMC_POWER);
 }
 
 static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
 	.exit		= cmx270_mci_exit,
 };
 
+static void __init cmx270_init_mmc(void)
+{
+	pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
@@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
 static int __init cmx270_pm_init(void) { return 0; }
 #endif
 
-static void __init cmx270_init(void)
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
 {
-	cmx270_pm_init();
-
-	set_pxa_fb_info(cmx270_display);
-
-	/* register CM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&cmx270_mci_platform_data);
-	pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
-	/* This enables the STUART */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+static void __init cmx270_init(void)
+{
+	cmx270_pm_init();
 
-	/* This enables the BTUART  */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+	cmx270_init_dm9000();
+	cmx270_init_rtc();
+	cmx270_init_display();
+	cmx270_init_mmc();
+	cmx270_init_ohci();
+	cmx270_init_ac97();
+	cmx270_init_touchscreen();
+	cmx270_init_leds();
+	cmx270_init_2700G();
 }
 
 static void __init cmx270_init_irq(void)
 {
 	pxa27x_init_irq();
 
+	cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
 
-	cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+	[0] = { /* PCI bridge */
+		.virtual	= CMX270_IT8152_VIRT,
+		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
+};
 
-	/* Setup interrupt for dm9000 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-	set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 
-	/* Setup interrupt for 2700G */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-	set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+	it8152_base_address = CMX270_IT8152_VIRT;
 }
-
+#else
 static void __init cmx270_map_io(void)
 {
 	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 }
-
+#endif
 
 MACHINE_START(ARMCORE, "Compulab CM-x270")
 	.boot_params	= 0xa0000100,
-- 
cgit v1.2.3


From 779c545d945eeb7778c27c531bae58df7767229d Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 17 Jun 2008 09:48:03 +0100
Subject: [ARM] 5104/1: CM-X270: PCMCIA updates

Convert to use gpio_lib interface.
Remove support for second PCMCIA slot to avoid run-time conflicts with MMC/SD
because of shared GPIO

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/pcmcia/pxa2xx_cm_x270.c | 93 ++++++++++++-----------------------------
 1 file changed, 27 insertions(+), 66 deletions(-)

diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index f123fce65f2..bb95db7d2b7 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -5,83 +5,60 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Compulab Ltd., 2003, 2007
+ * Compulab Ltd., 2003, 2007, 2008
  * Mike Rapoport <mike@compulab.co.il>
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 
-#include <pcmcia/ss.h>
-#include <asm/hardware.h>
 #include <asm/mach-types.h>
-
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/cm-x270.h>
 
 #include "soc_common.h"
 
+#define GPIO_PCMCIA_S0_CD_VALID	(84)
+#define GPIO_PCMCIA_S0_RDYINT	(82)
+#define GPIO_PCMCIA_RESET	(53)
+
+#define PCMCIA_S0_CD_VALID	IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S0_RDYINT	IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
+
+
 static struct pcmcia_irqs irqs[] = {
 	{ 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
-	{ 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
 };
 
 static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |
-		GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) |
-		GPIO_bit(GPIO85_nPCE_1) |
-		GPIO_bit(GPIO54_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO85_nPCE_1_MD);
-	pxa_gpio_mode(GPIO54_nPCE_2_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
-	/* Reset signal */
-	pxa_gpio_mode(GPIO53_nPCE_2 | GPIO_OUT);
-	GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-
-	set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
-	set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
-
-	/* irq's for slots: */
-	set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
-	set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
-
-	skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
-	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+	int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(GPIO_PCMCIA_RESET, 0);
+
+	skt->irq = PCMCIA_S0_RDYINT;
+	ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+	if (!ret)
+		gpio_free(GPIO_PCMCIA_RESET);
+
+	return ret;
 }
 
 static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
 {
 	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
-
-	set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
-	set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
-
-	set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
-	set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
+	gpio_free(GPIO_PCMCIA_RESET);
 }
 
 
 static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 				       struct pcmcia_state *state)
 {
-	state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
-	state->ready  = (PCC_READY(skt->nr) == 0) ? 0 : 1;
+	state->detect = (gpio_get_value(GPIO_PCMCIA_S0_CD_VALID) == 0) ? 1 : 0;
+	state->ready  = (gpio_get_value(GPIO_PCMCIA_S0_RDYINT) == 0) ? 0 : 1;
 	state->bvd1   = 1;
 	state->bvd2   = 1;
 	state->vs_3v  = 0;
@@ -93,32 +70,16 @@ static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 					  const socket_state_t *state)
 {
-	GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
-	pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
-
 	switch (skt->nr) {
 	case 0:
 		if (state->flags & SS_RESET) {
-			GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
-			GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-			udelay(10);
-			GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-			GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
-		}
-		break;
-	case 1:
-		if (state->flags & SS_RESET) {
-			GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
-			GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+			gpio_set_value(GPIO_PCMCIA_RESET, 1);
 			udelay(10);
-			GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-			GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+			gpio_set_value(GPIO_PCMCIA_RESET, 0);
 		}
 		break;
 	}
 
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-
 	return 0;
 }
 
@@ -139,7 +100,7 @@ static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
 	.configure_socket	= cmx270_pcmcia_configure_socket,
 	.socket_init		= cmx270_pcmcia_socket_init,
 	.socket_suspend		= cmx270_pcmcia_socket_suspend,
-	.nr			= 2,
+	.nr			= 1,
 };
 
 static struct platform_device *cmx270_pcmcia_device;
-- 
cgit v1.2.3


From 70eb33d67ab6982d0f9571621efb3c035b945684 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 17 Jun 2008 09:48:46 +0100
Subject: [ARM] 5105/1: CM-X270: update NAND flash driver to use gpio_lib

Update CM-X270 NAND flash driver to use gpio_lib.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/mtd/nand/cmx270_nand.c | 79 +++++++++++++++++++++++++-----------------
 1 file changed, 47 insertions(+), 32 deletions(-)

diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index cb663ef245d..fc8529bedfd 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -20,9 +20,11 @@
 
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/mach-types.h>
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
@@ -30,20 +32,6 @@
 #define GPIO_NAND_CS	(11)
 #define GPIO_NAND_RB	(89)
 
-/* This macro needed to ensure in-order operation of GPIO and local
- * bus. Without both asm command and dummy uncached read there're
- * states when NAND access is broken. I've looked for such macro(s) in
- * include/asm-arm but found nothing approptiate.
- * dmac_clean_range is close, but is makes cache invalidation
- * unnecessary here and it cannot be used in module
- */
-#define DRAIN_WB() \
-	do { \
-		unsigned char dummy; \
-		asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0"); \
-		dummy=*((unsigned char*)UNCACHED_ADDR); \
-	} while(0)
-
 /* MTD structure for CM-X270 board */
 static struct mtd_info *cmx270_nand_mtd;
 
@@ -103,14 +91,14 @@ static int cmx270_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 
 static inline void nand_cs_on(void)
 {
-	GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
-	DRAIN_WB();
+	dsb();
 
-	GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO_NAND_CS, 1);
 }
 
 /*
@@ -122,7 +110,7 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
 	struct nand_chip* this = mtd->priv;
 	unsigned int nandaddr = (unsigned int)this->IO_ADDR_W;
 
-	DRAIN_WB();
+	dsb();
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if ( ctrl & NAND_ALE )
@@ -139,12 +127,12 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
 			nand_cs_off();
 	}
 
-	DRAIN_WB();
+	dsb();
 	this->IO_ADDR_W = (void __iomem*)nandaddr;
 	if (dat != NAND_CMD_NONE)
 		writel((dat << 16), this->IO_ADDR_W);
 
-	DRAIN_WB();
+	dsb();
 }
 
 /*
@@ -152,9 +140,9 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
  */
 static int cmx270_device_ready(struct mtd_info *mtd)
 {
-	DRAIN_WB();
+	dsb();
 
-	return (GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB));
+	return (gpio_get_value(GPIO_NAND_RB));
 }
 
 /*
@@ -168,20 +156,40 @@ static int cmx270_init(void)
 	int mtd_parts_nb = 0;
 	int ret;
 
+	if (!machine_is_armcore())
+		return -ENODEV;
+
+	ret = gpio_request(GPIO_NAND_CS, "NAND CS");
+	if (ret) {
+		pr_warning("CM-X270: failed to request NAND CS gpio\n");
+		return ret;
+	}
+
+	gpio_direction_output(GPIO_NAND_CS, 1);
+
+	ret = gpio_request(GPIO_NAND_RB, "NAND R/B");
+	if (ret) {
+		pr_warning("CM-X270: failed to request NAND R/B gpio\n");
+		goto err_gpio_request;
+	}
+
+	gpio_direction_input(GPIO_NAND_RB);
+
 	/* Allocate memory for MTD device structure and private data */
 	cmx270_nand_mtd = kzalloc(sizeof(struct mtd_info) +
 				  sizeof(struct nand_chip),
 				  GFP_KERNEL);
 	if (!cmx270_nand_mtd) {
-		printk("Unable to allocate CM-X270 NAND MTD device structure.\n");
-		return -ENOMEM;
+		pr_debug("Unable to allocate CM-X270 NAND MTD device structure.\n");
+		ret = -ENOMEM;
+		goto err_kzalloc;
 	}
 
 	cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12);
 	if (!cmx270_nand_io) {
-		printk("Unable to ioremap NAND device\n");
+		pr_debug("Unable to ioremap NAND device\n");
 		ret = -EINVAL;
-		goto err1;
+		goto err_ioremap;
 	}
 
 	/* Get pointer to private data */
@@ -209,9 +217,9 @@ static int cmx270_init(void)
 
 	/* Scan to find existence of the device */
 	if (nand_scan (cmx270_nand_mtd, 1)) {
-		printk(KERN_NOTICE "No NAND device\n");
+		pr_notice("No NAND device\n");
 		ret = -ENXIO;
-		goto err2;
+		goto err_scan;
 	}
 
 #ifdef CONFIG_MTD_CMDLINE_PARTS
@@ -229,18 +237,22 @@ static int cmx270_init(void)
 	}
 
 	/* Register the partitions */
-	printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+	pr_notice("Using %s partition definition\n", part_type);
 	ret = add_mtd_partitions(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
 	if (ret)
-		goto err2;
+		goto err_scan;
 
 	/* Return happy */
 	return 0;
 
-err2:
+err_scan:
 	iounmap(cmx270_nand_io);
-err1:
+err_ioremap:
 	kfree(cmx270_nand_mtd);
+err_kzalloc:
+	gpio_free(GPIO_NAND_RB);
+err_gpio_request:
+	gpio_free(GPIO_NAND_CS);
 
 	return ret;
 
@@ -255,6 +267,9 @@ static void cmx270_cleanup(void)
 	/* Release resources, unregister device */
 	nand_release(cmx270_nand_mtd);
 
+	gpio_free(GPIO_NAND_RB);
+	gpio_free(GPIO_NAND_CS);
+
 	iounmap(cmx270_nand_io);
 
 	/* Free the MTD device structure */
-- 
cgit v1.2.3


From 839257c9a818c81a802fdd705602589355571662 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 17 Jun 2008 09:49:27 +0100
Subject: [ARM] 5106/1: CM-X270: remove unneeded cm-x270.h

The include/asm-arm/arch-pxa/cm-x270.h is not used anymore. Remove it.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-pxa/cm-x270.h | 50 --------------------------------------
 1 file changed, 50 deletions(-)
 delete mode 100644 include/asm-arm/arch-pxa/cm-x270.h

diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h
deleted file mode 100644
index f8fac9e1800..00000000000
--- a/include/asm-arm/arch-pxa/cm-x270.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm/arch-pxa/cm-x270.h
- *
- * Copyright Compulab Ltd., 2003, 2007
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* CM-x270 device physical addresses */
-#define CMX270_CS1_PHYS		(PXA_CS1_PHYS)
-#define MARATHON_PHYS		(PXA_CS2_PHYS)
-#define CMX270_IDE104_PHYS	(PXA_CS3_PHYS)
-#define CMX270_IT8152_PHYS	(PXA_CS4_PHYS)
-
-/* Statically mapped regions */
-#define CMX270_VIRT_BASE		(0xe8000000)
-#define CMX270_IT8152_VIRT		(CMX270_VIRT_BASE)
-#define CMX270_IDE104_VIRT		(CMX270_IT8152_VIRT + SZ_64M)
-
-/* GPIO related definitions */
-#define GPIO_IT8152_IRQ			(22)
-
-#define IRQ_GPIO_IT8152_IRQ	IRQ_GPIO(GPIO_IT8152_IRQ)
-#define PME_IRQ			IRQ_GPIO(0)
-#define CMX270_IDE_IRQ		IRQ_GPIO(100)
-#define CMX270_GPIRQ1		IRQ_GPIO(101)
-#define CMX270_TOUCHIRQ		IRQ_GPIO(96)
-#define CMX270_ETHIRQ		IRQ_GPIO(10)
-#define CMX270_GFXIRQ		IRQ_GPIO(95)
-#define CMX270_NANDIRQ		IRQ_GPIO(89)
-#define CMX270_MMC_IRQ		IRQ_GPIO(83)
-
-/* PCMCIA related definitions */
-#define PCC_DETECT(x)	(GPLR(84 - (x)) & GPIO_bit(84 - (x)))
-#define PCC_READY(x)	(GPLR(82 - (x)) & GPIO_bit(82 - (x)))
-
-#define PCMCIA_S0_CD_VALID		IRQ_GPIO(84)
-#define PCMCIA_S0_CD_VALID_EDGE		GPIO_BOTH_EDGES
-
-#define PCMCIA_S1_CD_VALID		IRQ_GPIO(83)
-#define PCMCIA_S1_CD_VALID_EDGE		GPIO_BOTH_EDGES
-
-#define PCMCIA_S0_RDYINT		IRQ_GPIO(82)
-#define PCMCIA_S1_RDYINT		IRQ_GPIO(81)
-
-#define PCMCIA_RESET_GPIO		53
-- 
cgit v1.2.3


From 03fe6692135842d992fe3e599e62bbe72ce08fef Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 17 Jun 2008 09:50:06 +0100
Subject: [ARM] 5107/1: Add maintainer entries for the CompuLab CM-X270/EM-X270
 machines

Add maintainer entries for the CompuLab CM-X270/EM-X270 machines

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index c68a1189140..99e531b0f2b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -486,6 +486,12 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
+P:	Mike Rapoport
+M:	mike@compulab.co.il
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+
 ARM/GUMSTIX MACHINE SUPPORT
 P:	Steve Sakoman
 M:	sakoman@gmail.com
-- 
cgit v1.2.3


From 043dd64e5d82ba6147b0034e1bfdd27d38d2f6c7 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 22 May 2008 15:07:05 +0800
Subject: [ARM] pxa: add codename zylonite for PXA3xx Development Platform

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index faa2c3f6c1a..013890bea47 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -173,7 +173,7 @@ config MACH_COLIBRI
 	select PXA27x
 
 config MACH_ZYLONITE
-	bool "PXA3xx Development Platform"
+	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
 	select HAVE_PWM
 
-- 
cgit v1.2.3


From 8a6e88736066fddec77aa33a18ffa0c5f8eb2def Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 2 Jun 2008 13:30:24 +0800
Subject: [ARM] pxa: use IORESOURCE_IRQ_* instead of IRQF_* for IRQ resource

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/littleton.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 530654474bb..8a8ef2bee29 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -101,7 +101,7 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	}
 };
 
-- 
cgit v1.2.3


From 36caeb4ec147dacb04e723080816e78f288f47cc Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 2 Jun 2008 13:32:42 +0800
Subject: [ARM] pxa: fix typo of CONFIG_*_MODULE

The correct macro name when a driver is built as a module is
CONFIG_*_MODULE instead of CONFIG_*_MODULES. This patch fixes
this in several places.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/littleton.c | 6 +++---
 arch/arm/mach-pxa/mainstone.c | 2 +-
 arch/arm/mach-pxa/zylonite.c  | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 8a8ef2bee29..ff81a84c19a 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -112,7 +112,7 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /* use bit 30, 31 as the indicator of command parameter number */
 #define CMD0(x)		((0x00000000) | ((x) << 9))
 #define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +311,9 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f2e9e7c4da8..6c3c37ccf58 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -513,7 +513,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 	.init		= mainstone_ohci_init,
 };
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int mainstone_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
 	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 66b446ca273..7465a9ce168 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -259,7 +259,7 @@ static void __init zylonite_init_mmc(void)
 static inline void zylonite_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int zylonite_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
-- 
cgit v1.2.3


From b18773d545e65fe442479e3f9853c8ebb8ec45d6 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 2 Jun 2008 17:41:42 +0800
Subject: [ARM] pxa: remove WAKEUP_ON_LEVEL_HIGH from keypad direct keys

Setting PKWR bits on those pins will make the resuming from
low power state to fail.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/mainstone.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 6c3c37ccf58..5b145fa7396 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -110,9 +110,9 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO45_AC97_SYSCLK,
 
 	/* Keypad */
-	GPIO93_KP_DKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO94_KP_DKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO95_KP_DKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO93_KP_DKIN_0,
+	GPIO94_KP_DKIN_1,
+	GPIO95_KP_DKIN_2,
 	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-- 
cgit v1.2.3


From 6d3dfe4a3141476a3cf59ce6d2d1c25f9b5cfae8 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 2 Jun 2008 15:58:03 +0800
Subject: [ARM] pxa: allow display of uncompress message through STUART

Some boards use UART other than FFUART for the console, E.g. Marvell
PXA3xx Form Factor Platform (aka Littleton) uses STUART. This patch
modifies the uncompress.h so that display of the uncompress message
is routed to the STUART.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-pxa/uncompress.h | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
index dadf4c20b62..f4551269aaf 100644
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ b/include/asm-arm/arch-pxa/uncompress.h
@@ -11,11 +11,11 @@
 
 #include <linux/serial_reg.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/mach-types.h>
 
-#define __REG(x)	((volatile unsigned long *)x)
-
-#define UART		FFUART
+#define __REG(x)       ((volatile unsigned long *)x)
 
+static volatile unsigned long *UART = FFUART;
 
 static inline void putc(char c)
 {
@@ -33,8 +33,13 @@ static inline void flush(void)
 {
 }
 
+static inline void arch_decomp_setup(void)
+{
+	if (machine_is_littleton())
+		UART = STUART;
+}
+
 /*
  * nothing to do
  */
-#define arch_decomp_setup()
 #define arch_decomp_wdog()
-- 
cgit v1.2.3


From d4a678080e83ff96e3933fa1e631cef3cda04bef Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 12 Jun 2008 18:49:08 +0800
Subject: [ARM] pxa: embed body of pxa320_init_mfp()

pxa320_init_mfp() is simple enough to be embedded into pxa320_init()
to simplify the code a bit.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/pxa320.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 74128eb8f8d..44ef0b95db0 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -74,16 +74,12 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static void __init pxa320_init_mfp(void)
-{
-	pxa3xx_init_mfp();
-	pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-}
-
 static int __init pxa320_init(void)
 {
-	if (cpu_is_pxa320())
-		pxa320_init_mfp();
+	if (cpu_is_pxa320()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+	}
 
 	return 0;
 }
-- 
cgit v1.2.3


From 0fedb0cad6ebc00af01013b5bbe52dd596853c63 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 16 Jun 2008 09:38:27 +0800
Subject: [ARM] pxa: introduce dedicated __mfp_validate() to check PXA2xx MFP

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/mfp-pxa2xx.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index d1cdb4ecb0b..ed91c043471 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -91,6 +91,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	return 0;
 }
 
+static inline int __mfp_validate(int mfp)
+{
+	int gpio = mfp_to_gpio(mfp);
+
+	if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+		pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+		return -1;
+	}
+
+	return gpio;
+}
+
 void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
 	unsigned long flags;
@@ -99,13 +111,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
 	for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
 
-		gpio = mfp_to_gpio(MFP_PIN(*c));
-
-		if (!gpio_desc[gpio].valid) {
-			pr_warning("%s: GPIO%d is invalid pin\n",
-				__func__, gpio);
+		gpio = __mfp_validate(MFP_PIN(*c));
+		if (gpio < 0)
 			continue;
-		}
 
 		local_irq_save(flags);
 
-- 
cgit v1.2.3


From 566b450c33ea43f339d54d445f4ea1ab2e021909 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 16 Jun 2008 09:47:47 +0800
Subject: [ARM] pxa: add pxa2xx_mfp_set_lpm() to facilitate low power state
 change

Some boards want to change low power state of pins on-the-fly, this
function helps to facilitate that operation instead of switching
back-n-forth between two configurations with pxa2xx_mfp_config().

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/mfp-pxa2xx.c        | 51 +++++++++++++++++++++++++----------
 include/asm-arm/arch-pxa/mfp-pxa2xx.h |  1 +
 2 files changed, 38 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index ed91c043471..fd4545eab80 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -39,6 +39,28 @@ struct gpio_desc {
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
 
+static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
+{
+	unsigned mask = GPIO_bit(gpio);
+
+	/* low power state */
+	switch (lpm) {
+	case MFP_LPM_DRIVE_HIGH:
+		PGSR(gpio) |= mask;
+		break;
+	case MFP_LPM_DRIVE_LOW:
+		PGSR(gpio) &= ~mask;
+		break;
+	case MFP_LPM_INPUT:
+		break;
+	default:
+		pr_warning("%s: invalid low power state for GPIO%d\n",
+				__func__, gpio);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
 	unsigned long gafr, mask = GPIO_bit(gpio);
@@ -57,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	else
 		GPDR(gpio) &= ~mask;
 
-	/* low power state */
-	switch (c & MFP_LPM_STATE_MASK) {
-	case MFP_LPM_DRIVE_HIGH:
-		PGSR(gpio) |= mask;
-		break;
-	case MFP_LPM_DRIVE_LOW:
-		PGSR(gpio) &= ~mask;
-		break;
-	case MFP_LPM_INPUT:
-		break;
-	default:
-		pr_warning("%s: invalid low power state for GPIO%d\n",
-				__func__, gpio);
+	if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
 		return -EINVAL;
-	}
 
 	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
 	 * configurations of those pins not able to wakeup
@@ -124,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 	}
 }
 
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+	unsigned long flags;
+	int gpio;
+
+	gpio = __mfp_validate(mfp);
+	if (gpio < 0)
+		return;
+
+	local_irq_save(flags);
+	__mfp_config_lpm(gpio, lpm);
+	local_irq_restore(flags);
+}
+
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
 	struct gpio_desc *d;
diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h
index db8d890d237..8de1c0dae62 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa2xx.h
@@ -128,5 +128,6 @@
 #define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
 
 extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
 extern int gpio_set_wake(unsigned int gpio, unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA2XX_H */
-- 
cgit v1.2.3


From 7a2c5cb0e2cafd5c3d07df1db8de183283a3b1ac Mon Sep 17 00:00:00 2001
From: eric miao <eric.miao@marvell.com>
Date: Tue, 19 Feb 2008 11:13:31 +0800
Subject: [ARM] pxa: make PXA3xx_CK() and PXA3xx_CKEN() public in clock.h

So processor specific clock sources can be defined in pxa300.c
and pxa320.c.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/clock.h  | 24 ++++++++++++++++++++++++
 arch/arm/mach-pxa/pxa3xx.c | 24 +++---------------------
 2 files changed, 27 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 83cbfaba485..7bd1bbbb165 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -52,4 +52,28 @@ extern const struct clkops clk_cken_ops;
 void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
+		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
+	}
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= _ops,				\
+		.cken	= CKEN_##_cken,			\
+	}
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
 void clks_register(struct clk *clks, size_t num);
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 15685d2b8f8..c4a0331ff45 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -144,7 +144,7 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
 	return hsio_clk;
 }
 
-static void clk_pxa3xx_cken_enable(struct clk *clk)
+void clk_pxa3xx_cken_enable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -154,7 +154,7 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
 		CKENB |= mask;
 }
 
-static void clk_pxa3xx_cken_disable(struct clk *clk)
+void clk_pxa3xx_cken_disable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -164,7 +164,7 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
 		CKENB &= ~mask;
 }
 
-static const struct clkops clk_pxa3xx_cken_ops = {
+const struct clkops clk_pxa3xx_cken_ops = {
 	.enable		= clk_pxa3xx_cken_enable,
 	.disable	= clk_pxa3xx_cken_disable,
 };
@@ -196,24 +196,6 @@ static const struct clkops clk_pout_ops = {
 	.disable	= clk_pout_disable,
 };
 
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= _ops,				\
-		.cken	= CKEN_##_cken,			\
-	}
-
 static struct clk pxa3xx_clks[] = {
 	{
 		.name           = "CLK_POUT",
-- 
cgit v1.2.3


From 7c3ada4f7cc76fa3912683da83eccf7886fca1b1 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 12 May 2008 09:25:37 +0800
Subject: [ARM] pxa: move pxa310 specific MMC3 clk out of generic pxa3xx.c

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/pxa300.c | 14 +++++++++++++-
 arch/arm/mach-pxa/pxa3xx.c |  1 -
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0a0d3877f21..a0db6fa7c32 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -15,10 +15,16 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
 #include <asm/arch/mfp-pxa300.h>
 
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
 static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
@@ -79,6 +85,10 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct clk pxa310_clks[] = {
+	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
 static int __init pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -86,8 +96,10 @@ static int __init pxa300_init(void)
 		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
 	}
 
-	if (cpu_is_pxa310())
+	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa310_clks));
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index c4a0331ff45..f491025a0c8 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -226,7 +226,6 @@ static struct clk pxa3xx_clks[] = {
 
 	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
 	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
-	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
 };
 
 #ifdef CONFIG_PM
-- 
cgit v1.2.3


From 9ae819a819b4dfc60ac13dd1f1e1a7eaa3d4a6cb Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 2 Jun 2008 15:22:03 +0800
Subject: [ARM] pxa: add pxa3xx NAND device and clock sources

A pxa3xx_set_nand_info() is also introduced to set the PXA3xx NAND
driver specific platform_data structure pointer.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Sergey Podstavin <spodstavin@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/devices.c            | 43 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/devices.h            |  2 ++
 arch/arm/mach-pxa/pxa300.c             |  5 ++++
 arch/arm/mach-pxa/pxa320.c             | 11 +++++++++
 include/asm-arm/arch-pxa/pxa3xx_nand.h |  2 ++
 5 files changed, 63 insertions(+)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index abc161dd083..84489dc51d8 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -16,6 +16,7 @@
 #include <asm/arch/pxa2xx_spi.h>
 #include <asm/arch/camera.h>
 #include <asm/arch/audio.h>
+#include <asm/arch/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -831,6 +832,48 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_nand[] = {
+	[0] = {
+		.start	= 0x43100000,
+		.end	= 0x43100053,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NAND,
+		.end	= IRQ_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for Data DMA */
+		.start	= 97,
+		.end	= 97,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for Command DMA */
+		.start	= 99,
+		.end	= 99,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+	.name		= "pxa3xx-nand",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxa3xx_nand_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
+	.resource	= pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_nand, info);
+}
 #endif /* CONFIG_PXA3xx */
 
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index b852eb18daa..887c738f591 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -31,4 +31,6 @@ extern struct platform_device pxa25x_device_pwm1;
 extern struct platform_device pxa27x_device_pwm0;
 extern struct platform_device pxa27x_device_pwm1;
 
+extern struct platform_device pxa3xx_device_nand;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index a0db6fa7c32..da92e973388 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -85,6 +85,10 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct clk common_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+};
+
 static struct clk pxa310_clks[] = {
 	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
 };
@@ -94,6 +98,7 @@ static int __init pxa300_init(void)
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(common_clks));
 	}
 
 	if (cpu_is_pxa310()) {
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 44ef0b95db0..c557c23a1ef 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -15,11 +15,17 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/arch/mfp.h>
+#include <asm/arch/pxa3xx-regs.h>
 #include <asm/arch/mfp-pxa320.h>
 
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
 static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
@@ -74,11 +80,16 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct clk pxa320_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+};
+
 static int __init pxa320_init(void)
 {
 	if (cpu_is_pxa320()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa320_clks));
 	}
 
 	return 0;
diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/include/asm-arm/arch-pxa/pxa3xx_nand.h
index 81a8937486c..eb4b190b665 100644
--- a/include/asm-arm/arch-pxa/pxa3xx_nand.h
+++ b/include/asm-arm/arch-pxa/pxa3xx_nand.h
@@ -15,4 +15,6 @@ struct pxa3xx_nand_platform_data {
 	struct mtd_partition *parts;
 	unsigned int	nr_parts;
 };
+
+extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
 #endif /* __ASM_ARCH_PXA3XX_NAND_H */
-- 
cgit v1.2.3


From 481b55262e396930e6e35b8a6d41e7c146e10241 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 2 Jun 2008 15:37:20 +0800
Subject: [ARM] pxa: add pxa3xx NAND support for zylonite

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Sergey Podstavin <spodstavin@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/zylonite.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 7465a9ce168..13ab2985a02 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -29,6 +29,7 @@
 #include <asm/arch/zylonite.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -324,6 +325,57 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= zylonite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+	pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init zylonite_init(void)
 {
 	/* board-processor specific initialization */
@@ -342,6 +394,7 @@ static void __init zylonite_init(void)
 	zylonite_init_lcd();
 	zylonite_init_mmc();
 	zylonite_init_keypad();
+	zylonite_init_nand();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-- 
cgit v1.2.3


From 9c1db1a1333197bc04dfd0c71d15f8ed43eb844d Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 2 Jun 2008 15:42:14 +0800
Subject: [ARM] pxa: add pxa3xx NAND support for littleton

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Sergey Podstavin <spodstavin@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/littleton.c | 53 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index ff81a84c19a..9a4f51d4875 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -38,6 +38,7 @@
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 #include <asm/arch/littleton.h>
 
 #include "generic.h"
@@ -361,6 +362,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+	pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
@@ -374,6 +426,7 @@ static void __init littleton_init(void)
 
 	littleton_init_lcd();
 	littleton_init_keypad();
+	littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-- 
cgit v1.2.3


From a1f7fc48c143537e2bf70affee7e8932f5be9bb4 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Wed, 28 May 2008 10:44:16 +0800
Subject: [ARM] pxa: add GPIO expander (PCA9539) support for zylonite

     And also reserve 32 IRQs for the two GPIO expanders.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/zylonite_pxa300.c | 42 +++++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-pxa/irqs.h     |  2 ++
 2 files changed, 44 insertions(+)

diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 6f7ae972b8d..75bf61f1f1c 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -16,9 +16,12 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
 #include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/i2c.h>
 #include <asm/arch/zylonite.h>
 
 #include "generic.h"
@@ -109,6 +112,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO12_MMC2_DAT3,
 	GPIO13_MMC2_CLK,
 	GPIO14_MMC2_CMD,
+
+	/* Standard I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -192,6 +199,39 @@ static void __init zylonite_detect_lcd_panel(void)
 		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
 }
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+	[0] = {
+		.gpio_base	= 128,
+	},
+	[1] = {
+		.gpio_base	= 144,
+	},
+};
+
+struct i2c_board_info zylonite_i2c_board_info[] = {
+	{
+		.type		= "pca9539",
+		.addr		= 0x74,
+		.platform_data	= &gpio_exp[0],
+		.irq		= IRQ_GPIO(18),
+	}, {
+		.type		= "pca9539",
+		.addr		= 0x75,
+		.platform_data	= &gpio_exp[1],
+		.irq		= IRQ_GPIO(19),
+	},
+};
+
+static void __init zylonite_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
 void __init zylonite_pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -207,6 +247,8 @@ void __init zylonite_pxa300_init(void)
 
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+		zylonite_init_i2c();
 	}
 
 	if (cpu_is_pxa300()) {
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index b6c8fe37768..d8573604846 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -184,6 +184,8 @@
       defined(CONFIG_MACH_PCM027) || \
       defined(CONFIG_MACH_MAGICIAN)
 #define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define NR_IRQS			(IRQ_BOARD_START + 32)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
-- 
cgit v1.2.3


From 5c9f50e90e8056fb5a8bdd479ab0591d5dad79a0 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 17 Jun 2008 19:03:54 +0800
Subject: [ARM] pxa: add simple gpio debug LEDs support for zylonite

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/zylonite.c        | 39 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/zylonite_pxa300.c |  4 ++++
 arch/arm/mach-pxa/zylonite_pxa320.c |  6 ++++++
 include/asm-arm/arch-pxa/zylonite.h |  2 ++
 4 files changed, 51 insertions(+)

diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 13ab2985a02..4a4711d36e7 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -38,6 +38,8 @@
 struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
 
 int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
 
 int wm9713_irq;
 
@@ -64,6 +66,42 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+	[0] = {
+		.name			= "zylonite:yellow:1",
+		.default_trigger	= "heartbeat",
+	},
+	[1] = {
+		.name			= "zylonite:yellow:2",
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+	.leds		= zylonite_debug_leds,
+	.num_leds	= ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &zylonite_debug_leds_info,
+	}
+};
+
+static void __init zylonite_init_leds(void)
+{
+	zylonite_debug_leds[0].gpio = gpio_debug_led1;
+	zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+	platform_device_register(&zylonite_device_leds);
+}
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
 	.pwm_id		= 3,
@@ -395,6 +433,7 @@ static void __init zylonite_init(void)
 	zylonite_init_mmc();
 	zylonite_init_keypad();
 	zylonite_init_nand();
+	zylonite_init_leds();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 75bf61f1f1c..b28d46e081d 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -264,4 +264,8 @@ void __init zylonite_pxa300_init(void)
 		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
 		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
+
+	/* GPIOs for Debug LEDs */
+	gpio_debug_led1 = EXT_GPIO(25);
+	gpio_debug_led2 = EXT_GPIO(26);
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b4fc34919a..2b7fba7a292 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -116,6 +116,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO27_MMC2_DAT3,
 	GPIO28_MMC2_CLK,
 	GPIO29_MMC2_CMD,
+
+	/* Debug LEDs */
+	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 #define NUM_LCD_DETECT_PINS	7
@@ -189,6 +193,8 @@ void __init zylonite_pxa320_init(void)
 
 		/* GPIO pin assignment */
 		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
+		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
+		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
 
 		/* MMC card detect & write protect for controller 0 */
 		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h
index de577de8d18..0d35ca04731 100644
--- a/include/asm-arm/arch-pxa/zylonite.h
+++ b/include/asm-arm/arch-pxa/zylonite.h
@@ -16,6 +16,8 @@ struct platform_mmc_slot {
 extern struct platform_mmc_slot zylonite_mmc_slot[];
 
 extern int gpio_eth_irq;
+extern int gpio_debug_led1;
+extern int gpio_debug_led2;
 
 extern int wm9713_irq;
 
-- 
cgit v1.2.3


From 20072fd0c93349e19527dd2fa9588b4335960e62 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 6 Jun 2008 16:34:03 +0800
Subject: [ARM] pxa: add support for L2 outer cache on XScale3
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The initial patch from Lothar, and Lennert make it into a cleaner
one, modified and tested on PXA320 by Eric Miao.

This patch moves the L2 cache operations out of proc-xsc3.S into
dedicated outer cache support code.

CACHE_XSC3L2 can be deselected so no L2 cache specific code will be
linked in, and that L2 enable bit will not be set, this applies to
the following cases:

    a. _only_ PXA300/PXA310 support included and no L2 cache wanted
    b. PXA320 support included, but want L2 be disabled

So the enabling of L2 depends on two things:

    - CACHE_XSC3L2 is selected
    - and L2 cache is present

Where the latter is only a safeguard (previous testing shows it works
OK even when this bit is turned on).

IXP series of processors with XScale3 cannot disable L2 cache for the
moment since they depend on the L2 cache for its coherent memory, so
IXP may always select CACHE_XSC3L2.

Other L2 relevant bits are always turned on (i.e. the original code
enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side
effects. Specifically, these bits are:

   - OC bits in TTBASE register (table walk outer cache attributes)
   - LLR Outer Cache Attributes (OC) in Auxiliary Control Register

Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 32b2d2d213a..e7c14e39938 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -74,3 +74,5 @@ obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
+obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
+
-- 
cgit v1.2.3


From aa9ae8eb1a917c8794bceef0a8e6ff1f4d7c46de Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Wed, 25 Jun 2008 22:17:16 +0100
Subject: Fix serial broken-ness on PXA250

PXA255 and 26x are the only PXA CPUs with HWUART. This patch prevents bogus
initialisation on other models.

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/pxa25x.c          |  4 ++--
 include/asm-arm/arch-pxa/hardware.h | 12 ++++++++++++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 4cd50e3005e..90b441f5df5 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -293,7 +293,7 @@ static int __init pxa25x_init(void)
 	int i, ret = 0;
 
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
+	if (cpu_is_pxa255())
 		clks_register(&pxa25x_hwuart_clk, 1);
 
 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
@@ -317,7 +317,7 @@ static int __init pxa25x_init(void)
 	}
 
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
+	if (cpu_is_pxa255())
 		ret = platform_device_register(&pxa_device_hwuart);
 
 	clks_register(&gpio7_clk, 1);
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index d9af6dabc89..b6a8317c2ec 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -69,6 +69,12 @@
 		_id == 0x212;				\
 	})
 
+#define __cpu_is_pxa255(id)                             \
+	({                                              \
+		unsigned int _id = (id) >> 4 & 0xfff;   \
+		_id == 0x2d0;                           \
+	 })
+
 #define __cpu_is_pxa25x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
@@ -76,6 +82,7 @@
 	})
 #else
 #define __cpu_is_pxa21x(id)	(0)
+#define __cpu_is_pxa255(id)	(0)
 #define __cpu_is_pxa25x(id)	(0)
 #endif
 
@@ -124,6 +131,11 @@
 		__cpu_is_pxa21x(read_cpuid_id());	\
 	})
 
+#define cpu_is_pxa255()                                 \
+	({                                              \
+		__cpu_is_pxa255(read_cpuid_id());       \
+	})
+
 #define cpu_is_pxa25x()					\
 	({						\
 		__cpu_is_pxa25x(read_cpuid_id());	\
-- 
cgit v1.2.3


From ed847782f6459a5c94aa0c9f93679f6a4176a47a Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Tue, 8 Jul 2008 10:32:08 +0100
Subject: Clocklib: Provide for GPIO 12 clock on PXA

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/clock.h  |  9 +++++++++
 arch/arm/mach-pxa/pxa25x.c | 24 ++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 83cbfaba485..32d0c074b35 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -47,6 +47,15 @@ struct clk {
 		.other	= _other,			\
 	}
 
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
+	{                                               \
+		.name   = _name,                        \
+		.dev    = _dev,                         \
+		.ops    = _ops,                         \
+		.rate   = _rate,                        \
+		.delay	= _delay,			\
+	}
+
 extern const struct clkops clk_cken_ops;
 
 void clk_cken_enable(struct clk *clk);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 90b441f5df5..034d3a6c31d 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -109,6 +109,29 @@ static const struct clkops clk_pxa25x_lcd_ops = {
 	.getrate	= clk_pxa25x_lcd_getrate,
 };
 
+static unsigned long gpio12_config_32k[] = {
+	GPIO12_32KHz,
+};
+
+static unsigned long gpio12_config_gpio[] = {
+	GPIO12_GPIO,
+};
+
+static void clk_gpio12_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_32k, 1);
+}
+
+static void clk_gpio12_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio12_ops = {
+	.enable         = clk_gpio12_enable,
+	.disable        = clk_gpio12_disable,
+};
+
 /*
  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -128,6 +151,7 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
 	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
 	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+	INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
 	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
 
-- 
cgit v1.2.3


From 13f7558237ed841b19f11e0920c01c4d6d50fcc5 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Tue, 8 Jul 2008 10:32:50 +0100
Subject: Clocklib: Fix SA1111 clock name mess.

This patch uses the ability of PXA's clocklib to alias clock to resolve the
problem caused by sharing the SA1111 IO controller between PXA and SA1100
architectures, which have differing GPIO numbering.

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/common/sa1111.c     |  2 +-
 arch/arm/mach-pxa/clock.c    | 30 ------------------------------
 arch/arm/mach-pxa/pxa25x.c   | 31 +++++++++++++++++++++++++++++--
 arch/arm/mach-sa1100/clock.c |  2 +-
 4 files changed, 31 insertions(+), 34 deletions(-)

diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index eb06d0b2cb7..79fa71d990b 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (!sachip)
 		return -ENOMEM;
 
-	sachip->clk = clk_get(me, "GPIO27_CLK");
+	sachip->clk = clk_get(me, "SA1111_CLK");
 	if (!sachip->clk) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index b4d04955dcb..630063ffa6f 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(struct clk *clk)
-{
-	pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-
 void clk_cken_enable(struct clk *clk)
 {
 	CKEN |= 1 << clk->cken;
@@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
 	.disable	= clk_cken_disable,
 };
 
-static struct clk common_clks[] = {
-	{
-		.name		= "GPIO27_CLK",
-		.ops		= &clk_gpio27_ops,
-		.rate		= 3686400,
-	},
-};
-
 void clks_register(struct clk *clks, size_t num)
 {
 	int i;
@@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
 		list_add(&clks[i].node, &clocks);
 	mutex_unlock(&clocks_mutex);
 }
-
-static int __init clk_init(void)
-{
-	clks_register(common_clks, ARRAY_SIZE(common_clks));
-	return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 034d3a6c31d..c5b845b935b 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -132,6 +132,29 @@ static const struct clkops clk_pxa25x_gpio12_ops = {
 	.disable        = clk_gpio12_disable,
 };
 
+static unsigned long gpio11_config_3m6[] = {
+	GPIO11_3_6MHz,
+};
+
+static unsigned long gpio11_config_gpio[] = {
+	GPIO11_GPIO,
+};
+
+static void clk_gpio11_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_3m6, 1);
+}
+
+static void clk_gpio11_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio11_ops = {
+	.enable         = clk_gpio11_enable,
+	.disable        = clk_gpio11_disable,
+};
+
 /*
  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -151,6 +174,7 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
 	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
 	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+	INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
 	INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
 	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
@@ -169,7 +193,10 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
-static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL);
+static struct clk pxa2xx_clk_aliases[] = {
+	INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
+	INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
+};
 
 #ifdef CONFIG_PM
 
@@ -344,7 +371,7 @@ static int __init pxa25x_init(void)
 	if (cpu_is_pxa255())
 		ret = platform_device_register(&pxa_device_hwuart);
 
-	clks_register(&gpio7_clk, 1);
+	clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
 
 	return ret;
 }
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index fc97fe57ee6..b5809c51d13 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -103,7 +103,7 @@ static void clk_gpio27_disable(void)
 }
 
 static struct clk clk_gpio27 = {
-	.name		= "GPIO27_CLK",
+	.name		= "SA1111_CLK",
 	.rate		= 3686400,
 	.enable		= clk_gpio27_enable,
 	.disable	= clk_gpio27_disable,
-- 
cgit v1.2.3


From b5e4ad57eeffef0ac274413f83be4ef903719ea4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Va=C5=A1ut?= <marek.vasut@gmail.com>
Date: Mon, 7 Jul 2008 17:25:46 +0100
Subject: [ARM] 5153/1: Add support for PalmTX handheld computer

PalmTX is PXA27x based device with wifi, bluetooth,
touchscreen, sdio slot, irda, keypad, nand flash,
pxa framebuffer, serial and usb gadget interface.

Supported by this patch is pxafb, touchscreen, irda,
keypad and sdio slot.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 MAINTAINERS                       |   6 +
 arch/arm/mach-pxa/Kconfig         |  14 ++
 arch/arm/mach-pxa/Makefile        |   1 +
 arch/arm/mach-pxa/palmtx.c        | 342 ++++++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-pxa/palmtx.h | 106 ++++++++++++
 5 files changed, 469 insertions(+)
 create mode 100644 arch/arm/mach-pxa/palmtx.c
 create mode 100644 include/asm-arm/arch-pxa/palmtx.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 8f0ec46a709..5375740cac6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -571,6 +571,12 @@ P:	Dirk Opfer
 M:	dirk@opfer-online.de
 S:	Maintained
 
+ARM/PALMTX SUPPORT
+P:	Marek Vasut
+M:	marek.vasut@gmail.com
+W:	http://hackndev.com
+S:	Maintained
+
 ARM/PLEB SUPPORT
 P:	Peter Chubb
 M:	pleb@gelato.unsw.edu.au
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index faa2c3f6c1a..2793076bd33 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -199,6 +199,20 @@ config MACH_PCM027
 	select IWMMXT
 	select PXA_SSP
 
+config ARCH_PXA_PALM
+	bool "PXA based Palm PDAs"
+	select HAVE_PWM
+
+config MACH_PALMTX
+	bool "Palm T|X"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
+
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4dfbe87fc4..d7dc3a76e33 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_MACH_PALMTX)+= palmtx.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 00000000000..ae8973279c2
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,342 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Alex Osborne <ato@meshy.org>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/audio.h>
+#include <asm/arch/palmtx.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO13_GPIO,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		return err;
+	}
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+	if (err)
+		goto pwr_err;
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto ro_err;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+ro_err:
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmtx_mci_power,
+	.get_ro		= palmtx_mci_get_ro,
+	.init 		= palmtx_mci_init,
+	.exit		= palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmtx_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+	.buttons	= palmtx_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtx_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMTX_MAX_INTENSITY,
+	.dft_brightness	= PALMTX_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTX_PERIOD_NS,
+	.init		= palmtx_backlight_init,
+	.notify		= palmtx_backlight_notify,
+	.exit		= palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmtx_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+	udelay(50);
+	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.udc_command		= palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+	.modes		= palmtx_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmtx_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmtx_pxa_keys,
+#endif
+	&palmtx_backlight,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+	.virtual	= PALMTX_PCMCIA_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+	.length		= PALMTX_PCMCIA_SIZE,
+	.type		= MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+	set_pxa_fb_info(&palmtx_lcd_screen);
+	pxa_set_mci_info(&palmtx_mci_platform_data);
+	pxa_set_udc_info(&palmtx_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtx_ficp_platform_data);
+	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+	.phys_io	= PALMTX_PHYS_IO_START,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= palmtx_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtx_init
+MACHINE_END
diff --git a/include/asm-arm/arch-pxa/palmtx.h b/include/asm-arm/arch-pxa/palmtx.h
new file mode 100644
index 00000000000..1e8bccbda51
--- /dev/null
+++ b/include/asm-arm/arch-pxa/palmtx.h
@@ -0,0 +1,106 @@
+/*
+ * GPIOs and interrupts for Palm T|X Handheld Computer
+ *
+ * Based on palmld-gpio.h by Alex Osborne
+ *
+ * Authors:	Marek Vasut <marek.vasut@gmail.com>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTX_H_
+#define _INCLUDE_PALMTX_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTX_GPIO_RESET		1
+
+#define GPIO_NR_PALMTX_POWER_DETECT		12 /* 90 */
+#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N		10
+#define GPIO_NR_PALMTX_EARPHONE_DETECT		107
+
+/* SD/MMC */
+#define GPIO_NR_PALMTX_SD_DETECT_N		14
+#define GPIO_NR_PALMTX_SD_POWER			114 /* probably */
+#define GPIO_NR_PALMTX_SD_READONLY		115 /* probably */
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMTX_WM9712_IRQ		27
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTX_IR_DISABLE		40
+
+/* USB */
+#define GPIO_NR_PALMTX_USB_DETECT_N		13
+#define GPIO_NR_PALMTX_USB_POWER		95
+#define GPIO_NR_PALMTX_USB_PULLUP		93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTX_BL_POWER			84
+#define GPIO_NR_PALMTX_LCD_POWER		96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMTX_BORDER_SWITCH		98
+#define GPIO_NR_PALMTX_BORDER_SELECT		22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMTX_BT_POWER			17
+#define GPIO_NR_PALMTX_BT_RESET			83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMTX_PCMCIA_POWER1		94
+#define GPIO_NR_PALMTX_PCMCIA_POWER2		108
+#define GPIO_NR_PALMTX_PCMCIA_RESET		79
+#define GPIO_NR_PALMTX_PCMCIA_READY		116
+
+/* NAND Flash ... this GPIO may be incorrect! */
+#define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMTX_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT	IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses  */
+#define PALMTX_PCMCIA_PHYS	0x28000000
+#define PALMTX_PCMCIA_VIRT	0xf0000000
+#define PALMTX_PCMCIA_SIZE	0x100000
+
+#define PALMTX_PHYS_RAM_START	0xa0000000
+#define PALMTX_PHYS_IO_START	0x40000000
+
+#define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
+#define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME			21
+
+
+/* BATTERY */
+#define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMTX_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMTX_MAX_LIFE_MINS		360	/* on-life in minutes */
+
+#define PALMTX_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTX_MAX_INTENSITY		0xFE
+#define PALMTX_DEFAULT_INTENSITY	0x7E
+#define PALMTX_LIMIT_MASK		0x7F
+#define PALMTX_PRESCALER		0x3F
+#define PALMTX_PERIOD_NS		3500
+
+#endif
-- 
cgit v1.2.3


From 359784084f3da86e2c7621fd9266e04b50287834 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Va=C5=A1ut?= <marek.vasut@gmail.com>
Date: Mon, 7 Jul 2008 17:28:59 +0100
Subject: [ARM] 5154/1: PalmTX PCMCIA

This patch adds PCMCIA support for PalmTX handheld computer.
There is one chip hard-soldered to slot0, another slot is
not in use and not accessible.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/palmtx.c     |  12 +++++
 drivers/pcmcia/Kconfig         |   3 +-
 drivers/pcmcia/Makefile        |   1 +
 drivers/pcmcia/pxa2xx_palmtx.c | 118 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 133 insertions(+), 1 deletion(-)
 create mode 100644 drivers/pcmcia/pxa2xx_palmtx.c

diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index ae8973279c2..0ca2f17402b 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -69,6 +69,18 @@ static unsigned long palmtx_pin_config[] __initdata = {
 
 	/* USB */
 	GPIO13_GPIO,
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
 };
 
 /******************************************************************************
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 1b0eb5aaf65..86dd324c8ce 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -219,7 +219,8 @@ config PCMCIA_SA1111
 config PCMCIA_PXA2XX
 	tristate "PXA2xx support"
 	depends on ARM && ARCH_PXA && PCMCIA
-	depends on ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL || MACH_ARMCORE
+	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
+		    || MACH_ARMCORE || ARCH_PXA_PALM)
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 6f6478ba717..8e6dd22e930 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -71,4 +71,5 @@ pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK)		+= pxa2xx_lubbock.o sa1111_generic.o
 pxa2xx_cs-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
 pxa2xx_cs-$(CONFIG_PXA_SHARPSL)			+= pxa2xx_sharpsl.o
 pxa2xx_cs-$(CONFIG_MACH_ARMCORE)		+= pxa2xx_cm_x270.o
+pxa2xx_cs-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
new file mode 100644
index 00000000000..4abde190c1f
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -0,0 +1,118 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmtx.c
+ *
+ * Driver for Palm T|X PCMCIA
+ *
+ * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/palmtx.h>
+
+#include "soc_common.h"
+
+static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+	return 0;
+}
+
+static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	state->detect = 1; /* always inserted */
+	state->ready  = !!gpio_get_value(GPIO_NR_PALMTX_PCMCIA_READY);
+	state->bvd1   = 1;
+	state->bvd2   = 1;
+	state->wrprot = 0;
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int
+palmtx_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				const socket_state_t *state)
+{
+	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER1, 1);
+	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER2, 1);
+	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_RESET,
+			!!(state->flags & SS_RESET));
+
+	return 0;
+}
+
+static void palmtx_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void palmtx_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level palmtx_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 0,
+	.nr			= 1,
+
+	.hw_init		= palmtx_pcmcia_hw_init,
+	.hw_shutdown		= palmtx_pcmcia_hw_shutdown,
+
+	.socket_state		= palmtx_pcmcia_socket_state,
+	.configure_socket	= palmtx_pcmcia_configure_socket,
+
+	.socket_init		= palmtx_pcmcia_socket_init,
+	.socket_suspend		= palmtx_pcmcia_socket_suspend,
+};
+
+static struct platform_device *palmtx_pcmcia_device;
+
+static int __init palmtx_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_palmtx())
+		return -ENODEV;
+
+	palmtx_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!palmtx_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(palmtx_pcmcia_device, &palmtx_pcmcia_ops,
+					sizeof(palmtx_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(palmtx_pcmcia_device);
+
+	if (ret)
+		platform_device_put(palmtx_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit palmtx_pcmcia_exit(void)
+{
+	platform_device_unregister(palmtx_pcmcia_device);
+}
+
+fs_initcall(palmtx_pcmcia_init);
+module_exit(palmtx_pcmcia_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm T|X");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From d4b19c42ca558273ab99a1093621f267d9d073fc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Va=C5=A1ut?= <marek.vasut@gmail.com>
Date: Mon, 7 Jul 2008 17:31:58 +0100
Subject: [ARM] 5155/1: PalmTX battery monitor

This patch adds battery monitoring driver for PalmTX.
It can read voltage from the battery and temperature.
It also monitors charging/discharging status.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/palmtx.c     |  62 +++++++++++++
 drivers/power/Kconfig          |   6 ++
 drivers/power/Makefile         |   1 +
 drivers/power/palmtx_battery.c | 198 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 267 insertions(+)
 create mode 100644 drivers/power/palmtx_battery.c

diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 0ca2f17402b..408657a24f8 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 
@@ -278,6 +279,66 @@ static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.udc_command		= palmtx_udc_command,
 };
 
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+
+	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+
+	return 0;
+
+err_cs_usb:
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+	return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmtx_is_ac_online,
+	.is_usb_online   = palmtx_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmtx_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -312,6 +373,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmtx_pxa_keys,
 #endif
 	&palmtx_backlight,
+	&power_supply,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 58c806e9c58..4d17d384578 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,4 +49,10 @@ config BATTERY_OLPC
 	help
 	  Say Y to enable support for the battery on the OLPC laptop.
 
+config BATTERY_PALMTX
+	tristate "Palm T|X battery"
+	depends on MACH_PALMTX
+	help
+	  Say Y to enable support for the battery in Palm T|X.
+
 endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 6413ded5fe5..6f43a54ee42 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
+obj-$(CONFIG_BATTERY_PALMTX)	+= palmtx_battery.o
diff --git a/drivers/power/palmtx_battery.c b/drivers/power/palmtx_battery.c
new file mode 100644
index 00000000000..244bb273a63
--- /dev/null
+++ b/drivers/power/palmtx_battery.c
@@ -0,0 +1,198 @@
+/*
+ * linux/drivers/power/palmtx_battery.c
+ *
+ * Battery measurement code for Palm T|X Handheld computer
+ *
+ * based on tosa_battery.c
+ *
+ * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/palmtx.h>
+
+static DEFINE_MUTEX(bat_lock);
+static struct work_struct bat_work;
+struct mutex work_lock;
+int bat_status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+static unsigned long palmtx_read_bat(struct power_supply *bat_ps)
+{
+	return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+				    WM97XX_AUX_ID3) * 1000 / 414;
+}
+
+static unsigned long palmtx_read_temp(struct power_supply *bat_ps)
+{
+	return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+				    WM97XX_AUX_ID2);
+}
+
+static int palmtx_bat_get_property(struct power_supply *bat_ps,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat_status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = palmtx_read_bat(bat_ps);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = PALMTX_BAT_MAX_VOLTAGE;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = PALMTX_BAT_MIN_VOLTAGE;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = palmtx_read_temp(bat_ps);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void palmtx_bat_external_power_changed(struct power_supply *bat_ps)
+{
+	schedule_work(&bat_work);
+}
+
+static char *status_text[] = {
+	[POWER_SUPPLY_STATUS_UNKNOWN] =		"Unknown",
+	[POWER_SUPPLY_STATUS_CHARGING] =	"Charging",
+	[POWER_SUPPLY_STATUS_DISCHARGING] =	"Discharging",
+};
+
+static void palmtx_bat_update(struct power_supply *bat_ps)
+{
+	int old_status = bat_status;
+
+	mutex_lock(&work_lock);
+
+	bat_status = gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT) ?
+				    POWER_SUPPLY_STATUS_CHARGING :
+				    POWER_SUPPLY_STATUS_DISCHARGING;
+
+	if (old_status != bat_status) {
+		pr_debug("%s %s -> %s\n", bat_ps->name,
+				status_text[old_status],
+				status_text[bat_status]);
+		power_supply_changed(bat_ps);
+	}
+
+	mutex_unlock(&work_lock);
+}
+
+static enum power_supply_property palmtx_bat_main_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+struct power_supply bat_ps = {
+	.name			= "main-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= palmtx_bat_main_props,
+	.num_properties		= ARRAY_SIZE(palmtx_bat_main_props),
+	.get_property		= palmtx_bat_get_property,
+	.external_power_changed = palmtx_bat_external_power_changed,
+	.use_for_apm		= 1,
+};
+
+static void palmtx_bat_work(struct work_struct *work)
+{
+	palmtx_bat_update(&bat_ps);
+}
+
+#ifdef CONFIG_PM
+static int palmtx_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+	flush_scheduled_work();
+	return 0;
+}
+
+static int palmtx_bat_resume(struct platform_device *dev)
+{
+	schedule_work(&bat_work);
+	return 0;
+}
+#else
+#define palmtx_bat_suspend NULL
+#define palmtx_bat_resume NULL
+#endif
+
+static int __devinit palmtx_bat_probe(struct platform_device *dev)
+{
+	int ret = 0;
+
+	if (!machine_is_palmtx())
+		return -ENODEV;
+
+	mutex_init(&work_lock);
+
+	INIT_WORK(&bat_work, palmtx_bat_work);
+
+	ret = power_supply_register(&dev->dev, &bat_ps);
+	if (!ret)
+		schedule_work(&bat_work);
+
+	return ret;
+}
+
+static int __devexit palmtx_bat_remove(struct platform_device *dev)
+{
+	power_supply_unregister(&bat_ps);
+	return 0;
+}
+
+static struct platform_driver palmtx_bat_driver = {
+	.driver.name	= "wm97xx-battery",
+	.driver.owner	= THIS_MODULE,
+	.probe		= palmtx_bat_probe,
+	.remove		= __devexit_p(palmtx_bat_remove),
+	.suspend	= palmtx_bat_suspend,
+	.resume		= palmtx_bat_resume,
+};
+
+static int __init palmtx_bat_init(void)
+{
+	return platform_driver_register(&palmtx_bat_driver);
+}
+
+static void __exit palmtx_bat_exit(void)
+{
+	platform_driver_unregister(&palmtx_bat_driver);
+}
+
+module_init(palmtx_bat_init);
+module_exit(palmtx_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("Palm T|X battery driver");
-- 
cgit v1.2.3


From 00249adc0ebf9bc5e1b7b53dee37601fd7291396 Mon Sep 17 00:00:00 2001
From: Stefan Schmidt <stefan@datenfreihafen.org>
Date: Wed, 9 Jul 2008 08:05:42 +0100
Subject: [ARM] 5165/1: pxafb: More LCCR3 depth defines

Add missing depth definitions to LCCR3.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-pxa/regs-lcd.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
index f762493f514..999b2a02ce2 100644
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ b/include/asm-arm/arch-pxa/regs-lcd.h
@@ -24,6 +24,12 @@
 #define LCCR3_4BPP	(2 << 24)
 #define LCCR3_8BPP	(3 << 24)
 #define LCCR3_16BPP	(4 << 24)
+#define LCCR3_18BPP	(5 << 24)
+#define LCCR3_18BPP_P	(6 << 24)
+#define LCCR3_19BPP	(7 << 24)
+#define LCCR3_19BPP_P	(1 << 29)
+#define LCCR3_24BPP	((1 << 29) | (1 << 24))
+#define LCCR3_25BPP	((1 << 29) | (2 << 24))
 
 #define LCCR3_PDFOR_0	(0 << 30)
 #define LCCR3_PDFOR_1	(1 << 30)
-- 
cgit v1.2.3


From c1450f156fda8921a55e3f4fe596274278010f31 Mon Sep 17 00:00:00 2001
From: Stefan Schmidt <stefan@datenfreihafen.org>
Date: Wed, 9 Jul 2008 08:06:32 +0100
Subject: [ARM] 5164/1: pxafb: Support for RGB666, RGBT666, RGB888 and RGBT888

Add the .depth field to pxafb_mode_info and use it to set pixel data format
as 18(RGB666), 19(RGBT666), 24(RGB888) or 25(RGBT888)

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/pxafb.c            | 64 ++++++++++++++++++++++++++++++++++++++--
 include/asm-arm/arch-pxa/pxafb.h |  3 +-
 2 files changed, 63 insertions(+), 4 deletions(-)

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 3682bbd7e50..295ff4e1955 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -227,6 +227,22 @@ static int pxafb_bpp_to_lccr3(struct fb_var_screeninfo *var)
 	case 4:  ret = LCCR3_4BPP; break;
 	case 8:  ret = LCCR3_8BPP; break;
 	case 16: ret = LCCR3_16BPP; break;
+	case 24:
+		switch (var->red.length + var->green.length +
+				var->blue.length + var->transp.length) {
+		case 18: ret = LCCR3_18BPP_P | LCCR3_PDFOR_3; break;
+		case 19: ret = LCCR3_19BPP_P; break;
+		}
+		break;
+	case 32:
+		switch (var->red.length + var->green.length +
+				var->blue.length + var->transp.length) {
+		case 18: ret = LCCR3_18BPP | LCCR3_PDFOR_3; break;
+		case 19: ret = LCCR3_19BPP; break;
+		case 24: ret = LCCR3_24BPP | LCCR3_PDFOR_3; break;
+		case 25: ret = LCCR3_25BPP; break;
+		}
+		break;
 	}
 	return ret;
 }
@@ -345,6 +361,41 @@ static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		var->green.offset = 5;  var->green.length = 6;
 		var->blue.offset  = 0;  var->blue.length  = 5;
 		var->transp.offset = var->transp.length = 0;
+	} else if (var->bits_per_pixel > 16) {
+		struct pxafb_mode_info *mode;
+
+		mode = pxafb_getmode(inf, var);
+		if (!mode)
+			return -EINVAL;
+
+		switch (mode->depth) {
+		case 18: /* RGB666 */
+			var->transp.offset = var->transp.length     = 0;
+			var->red.offset	   = 12; var->red.length    = 6;
+			var->green.offset  = 6;  var->green.length  = 6;
+			var->blue.offset   = 0;  var->blue.length   = 6;
+			break;
+		case 19: /* RGBT666 */
+			var->transp.offset = 18; var->transp.length = 1;
+			var->red.offset	   = 12; var->red.length    = 6;
+			var->green.offset  = 6;  var->green.length  = 6;
+			var->blue.offset   = 0;  var->blue.length   = 6;
+			break;
+		case 24: /* RGB888 */
+			var->transp.offset = var->transp.length     = 0;
+			var->red.offset	   = 16; var->red.length    = 8;
+			var->green.offset  = 8;  var->green.length  = 8;
+			var->blue.offset   = 0;  var->blue.length   = 8;
+			break;
+		case 25: /* RGBT888 */
+			var->transp.offset = 24; var->transp.length = 1;
+			var->red.offset	   = 16; var->red.length    = 8;
+			var->green.offset  = 8;  var->green.length  = 8;
+			var->blue.offset   = 0;  var->blue.length   = 8;
+			break;
+		default:
+			return -EINVAL;
+		}
 	} else {
 		var->red.offset = var->green.offset = 0;
 		var->blue.offset = var->transp.offset = 0;
@@ -376,7 +427,7 @@ static int pxafb_set_par(struct fb_info *info)
 	struct pxafb_info *fbi = (struct pxafb_info *)info;
 	struct fb_var_screeninfo *var = &info->var;
 
-	if (var->bits_per_pixel == 16)
+	if (var->bits_per_pixel >= 16)
 		fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
 	else if (!fbi->cmap_static)
 		fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
@@ -391,7 +442,7 @@ static int pxafb_set_par(struct fb_info *info)
 
 	fbi->fb.fix.line_length = var->xres_virtual *
 				  var->bits_per_pixel / 8;
-	if (var->bits_per_pixel == 16)
+	if (var->bits_per_pixel >= 16)
 		fbi->palette_size = 0;
 	else
 		fbi->palette_size = var->bits_per_pixel == 1 ?
@@ -404,7 +455,7 @@ static int pxafb_set_par(struct fb_info *info)
 	 */
 	pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
 
-	if (fbi->fb.var.bits_per_pixel == 16)
+	if (fbi->fb.var.bits_per_pixel >= 16)
 		fb_dealloc_cmap(&fbi->fb.cmap);
 	else
 		fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
@@ -831,6 +882,8 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
 		case 4:
 		case 8:
 		case 16:
+		case 24:
+		case 32:
 			break;
 		default:
 			printk(KERN_ERR "%s: invalid bit depth %d\n",
@@ -968,6 +1021,11 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
 
 	for (gpio = 58; ldd_bits; gpio++, ldd_bits--)
 		pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
+	/* 18 bit interface */
+	if (fbi->fb.var.bits_per_pixel > 16) {
+		pxa_gpio_mode(86 | GPIO_ALT_FN_2_OUT);
+		pxa_gpio_mode(87 | GPIO_ALT_FN_2_OUT);
+	}
 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
 	pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
 	pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h
index bbd22396841..daf018d0c60 100644
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ b/include/asm-arm/arch-pxa/pxafb.h
@@ -71,7 +71,8 @@ struct pxafb_mode_info {
 
 	u_char		bpp;
 	u_int		cmap_greyscale:1,
-			unused:31;
+			depth:8,
+			unused:23;
 
 	/* Parallel Mode Timing */
 	u_char		hsync_len;
-- 
cgit v1.2.3


From 390d452fa1d912b6e76744a34777d7390ab1fa1c Mon Sep 17 00:00:00 2001
From: Stefan Schmidt <stefan@datenfreihafen.org>
Date: Wed, 9 Jul 2008 08:07:29 +0100
Subject: [ARM] 5163/1: pxa27x_udc: Allow choosing the bits in UP2OCR_SEOS

Allow choosing the bits in UP2OCR_SEOS.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-pxa/pxa27x-udc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h
index bc1cf7d0773..ab1443f8bd8 100644
--- a/include/asm-arm/arch-pxa/pxa27x-udc.h
+++ b/include/asm-arm/arch-pxa/pxa27x-udc.h
@@ -97,7 +97,7 @@
 #define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
 #define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
 #define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
-#define UP2OCR_SEOS		(1 << 24)	/* Single-Ended Output Select */
+#define UP2OCR_SEOS(x)		((x & 7) << 24)	/* Single-Ended Output Select */
 
 #define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
 #define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
-- 
cgit v1.2.3


From a5f426bda73a743fd105274fe299d446d50e692e Mon Sep 17 00:00:00 2001
From: Stefan Schmidt <stefan@datenfreihafen.org>
Date: Wed, 9 Jul 2008 08:08:50 +0100
Subject: [ARM] 5161/1: Maintainer entries for the Motorola EZX GSM mobile
 phones

Maintainer entries for the Motorola EZX GSM mobile phones.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 MAINTAINERS | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index c68a1189140..f172c422058 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -486,6 +486,17 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
+P: Daniel Ribeiro
+M: drwyrm@gmail.com
+P: Stefan Schmidt
+M: stefan@openezx.org
+P: Harald Welte
+M: laforge@openezx.org
+L: openezx-devel@lists.openezx.org (subscribers-only)
+W: http://www.openezx.org/
+S: Maintained
+
 ARM/GUMSTIX MACHINE SUPPORT
 P:	Steve Sakoman
 M:	sakoman@gmail.com
-- 
cgit v1.2.3


From 9ab24e4ef0b4e0a7eb8ea897c6178139aab3b260 Mon Sep 17 00:00:00 2001
From: Stefan Schmidt <stefan@datenfreihafen.org>
Date: Wed, 9 Jul 2008 08:08:17 +0100
Subject: [ARM] 5162/1: Common code for the Motorola EZX GSM phones

Common code for the different EZX GSM phones. Functions to control framebuffer,
backlight power, OHCI and UART init.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig  |  36 ++++++++
 arch/arm/mach-pxa/Makefile |   1 +
 arch/arm/mach-pxa/ezx.c    | 220 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 257 insertions(+)
 create mode 100644 arch/arm/mach-pxa/ezx.c

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index faa2c3f6c1a..3818b472022 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -220,6 +220,42 @@ config PCM990_DISPLAY_NONE
 endchoice
 
 
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
+
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
+
 endmenu
 
 config PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4dfbe87fc4..1dded6499d0 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -46,6 +46,7 @@ endif
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
 led-y := leds.o
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 00000000000..0143eed6539
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/i2c.h>
+
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &ezx_backlight_data,
+	},
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+	.pixclock		= 150000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+	.modes		= &mode_ezx_old,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+	.pixclock		= 192308,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 32,
+	.depth			= 18,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+	.modes		= &mode_72r89803y01,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+	/* PWM backlight */
+	GPIO16_PWM0_OUT,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* For A780 support (connected with Neptune GSM chip) */
+	GPIO30_USB_P3_2,	/* ICL_TXENB */
+	GPIO31_USB_P3_6,	/* ICL_VPOUT */
+	GPIO90_USB_P3_5,	/* ICL_VPIN */
+	GPIO91_USB_P3_1,	/* ICL_XRXD */
+	GPIO56_USB_P3_4,	/* ICL_VMOUT */
+	GPIO113_USB_P3_3,	/* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa_set_i2c_info(NULL);
+	if (machine_is_ezx_a780() || machine_is_ezx_e680())
+		set_pxa_fb_info(&ezx_fb_info_1);
+	else
+		set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+		char **cmdline, struct meminfo *mi)
+{
+	/* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+	 * 16MB one at 0xAC000000
+	 */
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (32*1024*1024);
+	mi->bank[1].start = 0xac000000;
+	mi->bank[1].node = 1;
+	mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
-- 
cgit v1.2.3


From 79c410db6680e8393314003739233b1df0a338fe Mon Sep 17 00:00:00 2001
From: Stefan Schmidt <stefan@datenfreihafen.org>
Date: Thu, 10 Jul 2008 14:32:54 +0100
Subject: [ARM] 5169/1: Defconfig for the EZX machines

This defconfig enables all currently available features. It also builds one
zImage which runs on all machines.

Signed-off-by: Antonio Ospite <ao2@openezx.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/ezx_defconfig | 1614 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 1614 insertions(+)
 create mode 100644 arch/arm/configs/ezx_defconfig

diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
new file mode 100644
index 00000000000..2a84d557adc
--- /dev/null
+++ b/arch/arm/configs/ezx_defconfig
@@ -0,0 +1,1614 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc3
+# Mon Jul  7 17:52:21 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_PXA_EZX=y
+CONFIG_MACH_EZX_A780=y
+CONFIG_MACH_EZX_E680=y
+CONFIG_MACH_EZX_A1200=y
+CONFIG_MACH_EZX_A910=y
+CONFIG_MACH_EZX_E6=y
+CONFIG_MACH_EZX_E2=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_EZX_PCAP=y
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_PXA27x is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From bbae02035a87a3ef45f751032ec8d2bb6f3ed496 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Thu, 19 Jun 2008 03:18:09 +0100
Subject: [ARM] 5108/2: PXA SSP: Don't unconditionally free interrupt

Callers may stop the SSP core requesting the interrupt so it can't be
freed unconditionally.  Also use NO_IRQ like we should.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/ssp.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 00af7f2fed6..363668cc3a9 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -285,7 +285,7 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
 			goto out_region;
 		dev->irq = ssp->irq;
 	} else
-		dev->irq = 0;
+		dev->irq = NO_IRQ;
 
 	/* turn on SSP port clock */
 	clk_enable(ssp->clk);
@@ -306,7 +306,8 @@ void ssp_exit(struct ssp_dev *dev)
 	struct ssp_device *ssp = dev->ssp;
 
 	ssp_disable(dev);
-	free_irq(dev->irq, dev);
+	if (dev->irq != NO_IRQ)
+		free_irq(dev->irq, dev);
 	clk_disable(ssp->clk);
 	ssp_free(ssp);
 }
-- 
cgit v1.2.3


From 919dcb2111dea341a8281a3dc893967c7dccd93f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Thu, 19 Jun 2008 02:55:52 +0100
Subject: [ARM] 5110/1: PXA SSP: Remember the platform device on probe()

pdev is used later on by dev_printk() so must be set.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/ssp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 363668cc3a9..20d0a06af06 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -361,6 +361,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
 		dev_err(&pdev->dev, "failed to allocate memory");
 		return -ENOMEM;
 	}
+	ssp->pdev = pdev;
 
 	ssp->clk = clk_get(&pdev->dev, "SSPCLK");
 	if (IS_ERR(ssp->clk)) {
-- 
cgit v1.2.3


From d6c47417a4ddf500a106fc8718c0f6107c7d5211 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Thu, 19 Jun 2008 03:11:50 +0100
Subject: [ARM] 5112/1: PXA SSP: Strip in-code changelog

It's not been updated in quite some time and we now have git for
history.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/ssp.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 20d0a06af06..0d48fbddc2d 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -14,13 +14,6 @@
  *  IO-based SSP applications and allows easy port setup for DMA access.
  *
  *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- *
- *  Revision history:
- *   22nd Aug 2003 Initial version.
- *   20th Dec 2004 Added ssp_config for changing port config without
- *                 closing the port.
- *    4th Aug 2005 Added option to disable irq handler registration and
- *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
-- 
cgit v1.2.3


From 54b238469bce3a1b5012b2f0ebf261cf1c53e664 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Thu, 19 Jun 2008 03:11:49 +0100
Subject: [ARM] 5113/1: PXA SSP: Additional register definitions for PXA3xx SSP

Also add some white space for a little clarity.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-pxa/regs-ssp.h | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h
index 0255328c3c1..3c04cde2cf1 100644
--- a/include/asm-arm/arch-pxa/regs-ssp.h
+++ b/include/asm-arm/arch-pxa/regs-ssp.h
@@ -20,6 +20,10 @@
 #define SSTSS		(0x38)  /* SSP Timeslot Status */
 #define SSACD		(0x3C)  /* SSP Audio Clock Divider */
 
+#if defined(CONFIG_PXA3xx)
+#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
+#endif
+
 /* Common PXA2xx bits first */
 #define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
 #define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
@@ -29,10 +33,12 @@
 #define SSCR0_National	(0x2 << 4)	/* National Microwire */
 #define SSCR0_ECS	(1 << 6)	/* External clock select */
 #define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+
 #if defined(CONFIG_PXA25x)
 #define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-#elif defined(CONFIG_PXA27x)
+
+#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
 #define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
@@ -45,6 +51,10 @@
 #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
 #endif
 
+#if defined(CONFIG_PXA3xx)
+#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
+#endif
+
 #define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
 #define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
 #define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
@@ -109,5 +119,9 @@
 #define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
 #define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
 #define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
+#if defined(CONFIG_PXA3xx)
+#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
+#endif
+
 
 #endif /* __ASM_ARCH_REGS_SSP_H */
-- 
cgit v1.2.3


From c316f101a10f2681618ffb537ecba6084d5a137e Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Thu, 10 Jul 2008 20:01:07 +0100
Subject: E-series GPIO / IRQ definitions.

---
 include/asm-arm/arch-pxa/eseries-gpio.h | 50 +++++++++++++++++++++++++++++++++
 include/asm-arm/arch-pxa/eseries-irq.h  | 27 ++++++++++++++++++
 2 files changed, 77 insertions(+)
 create mode 100644 include/asm-arm/arch-pxa/eseries-gpio.h
 create mode 100644 include/asm-arm/arch-pxa/eseries-irq.h

diff --git a/include/asm-arm/arch-pxa/eseries-gpio.h b/include/asm-arm/arch-pxa/eseries-gpio.h
new file mode 100644
index 00000000000..4c90b131027
--- /dev/null
+++ b/include/asm-arm/arch-pxa/eseries-gpio.h
@@ -0,0 +1,50 @@
+/*
+ *  eseries-gpio.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+/* e-series power button */
+#define GPIO_ESERIES_POWERBTN     0
+
+/* UDC GPIO definitions */
+#define GPIO_E7XX_USB_DISC       13
+#define GPIO_E7XX_USB_PULLUP      3
+
+#define GPIO_E800_USB_DISC        4
+#define GPIO_E800_USB_PULLUP     84
+
+/* e740 PCMCIA GPIO definitions */
+/* Note: PWR1 seems to be inverted */
+#define GPIO_E740_PCMCIA_CD0      8
+#define GPIO_E740_PCMCIA_CD1     44
+#define GPIO_E740_PCMCIA_RDY0    11
+#define GPIO_E740_PCMCIA_RDY1     6
+#define GPIO_E740_PCMCIA_RST0    27
+#define GPIO_E740_PCMCIA_RST1    24
+#define GPIO_E740_PCMCIA_PWR0    20
+#define GPIO_E740_PCMCIA_PWR1    23
+
+/* e750 PCMCIA GPIO definitions */
+#define GPIO_E750_PCMCIA_CD0      8
+#define GPIO_E750_PCMCIA_RDY0    12
+#define GPIO_E750_PCMCIA_RST0    27
+#define GPIO_E750_PCMCIA_PWR0    20
+
+/* e800 PCMCIA GPIO definitions */
+#define GPIO_E800_PCMCIA_RST0    69
+#define GPIO_E800_PCMCIA_RST1    72
+#define GPIO_E800_PCMCIA_PWR0    20
+#define GPIO_E800_PCMCIA_PWR1    73
+
+/* e7xx IrDA power control */
+#define GPIO_E7XX_IR_ON          38
+
+/* ASIC related GPIOs */
+#define GPIO_ESERIES_TMIO_IRQ        5
+#define GPIO_E800_ANGELX_IRQ      8
diff --git a/include/asm-arm/arch-pxa/eseries-irq.h b/include/asm-arm/arch-pxa/eseries-irq.h
new file mode 100644
index 00000000000..f2a93d5e31d
--- /dev/null
+++ b/include/asm-arm/arch-pxa/eseries-irq.h
@@ -0,0 +1,27 @@
+/*
+ *  eseries-irq.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
+#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
+
+#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
+#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
+#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
+#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
+#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
+#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
+
+#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
+#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
+
+#define TMIO_SD_IRQ     IRQ_TMIO(1)
+#define TMIO_USB_IRQ    IRQ_TMIO(2)
+
-- 
cgit v1.2.3


From 877e03d4aeabb88018c533eeb7386cf8c3aec689 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Wed, 25 Jun 2008 22:22:49 +0100
Subject: Fix broken e-series build

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/eseries.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index ee0ae93c876..6cf43f4f3a5 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -17,7 +17,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/mach-types.h>
 
-#include <generic.h>
+#include "generic.h"
 
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
-- 
cgit v1.2.3


From b3d354b8d8d676c97794a5b984613d51ad683f17 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Wed, 25 Jun 2008 22:39:31 +0100
Subject: Add e350 support

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/Kconfig   |  8 ++++++++
 arch/arm/mach-pxa/eseries.c | 13 +++++++++++++
 2 files changed, 21 insertions(+)

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index faa2c3f6c1a..0c96229a2db 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -124,6 +124,14 @@ config MACH_E330
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e330 family PDA.
 
+config MACH_E350
+	bool "Toshiba e350"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
+
 config MACH_E740
 	bool "Toshiba e740"
 	default y
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 6cf43f4f3a5..c29b7b21c11 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -47,6 +47,19 @@ MACHINE_START(E330, "Toshiba e330")
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa25x_init_irq,
+	.fixup          = eseries_fixup,
+	.timer = &pxa_timer,
+MACHINE_END
+#endif
+
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
-- 
cgit v1.2.3


From 8fb105f5cc7f31ff37755945378a668f4c21590e Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Wed, 25 Jun 2008 22:34:51 +0100
Subject: PXA UDC - allow use of inverted GPIO for pullup

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 drivers/usb/gadget/pxa25x_udc.c   | 6 ++++--
 include/asm-arm/mach/udc_pxa2xx.h | 1 +
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 031dceb9302..5d50031938a 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -152,9 +152,10 @@ static int is_vbus_present(void)
 static void pullup_off(void)
 {
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
+	int off_level = mach->gpio_pullup_inverted;
 
 	if (mach->gpio_pullup)
-		gpio_set_value(mach->gpio_pullup, 0);
+		gpio_set_value(mach->gpio_pullup, off_level);
 	else if (mach->udc_command)
 		mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
 }
@@ -162,9 +163,10 @@ static void pullup_off(void)
 static void pullup_on(void)
 {
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
+	int on_level = !mach->gpio_pullup_inverted;
 
 	if (mach->gpio_pullup)
-		gpio_set_value(mach->gpio_pullup, 1);
+		gpio_set_value(mach->gpio_pullup, on_level);
 	else if (mach->udc_command)
 		mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
 }
diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h
index f9f3606986c..9e5ed7c0f27 100644
--- a/include/asm-arm/mach/udc_pxa2xx.h
+++ b/include/asm-arm/mach/udc_pxa2xx.h
@@ -23,6 +23,7 @@ struct pxa2xx_udc_mach_info {
 	 */
 	bool	gpio_vbus_inverted;
 	u16	gpio_vbus;			/* high == vbus present */
+	bool	gpio_pullup_inverted;
 	u16	gpio_pullup;			/* high == pullup activated */
 };
 
-- 
cgit v1.2.3


From 32584c86b26e503dcd7228ab1c67a1e4ce9b48c4 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Thu, 10 Jul 2008 20:16:35 +0100
Subject: E-series UDC support

Signed-off-by: IAn Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/Makefile      |  2 +-
 arch/arm/mach-pxa/eseries_udc.c | 57 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-pxa/eseries_udc.c

diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4dfbe87fc4..9d4c3931d0e 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -36,7 +36,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
new file mode 100644
index 00000000000..362847a1099
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -0,0 +1,57 @@
+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/arch/udc.h>
+#include <asm/arch/eseries-gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+	if (machine_is_e330() || machine_is_e350() ||
+	    machine_is_e740() || machine_is_e750() ||
+	    machine_is_e400())
+		pxa_set_udc_info(&e7xx_udc_mach_info);
+	else if (machine_is_e800())
+		pxa_set_udc_info(&e800_udc_mach_info);
+
+	return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");
-- 
cgit v1.2.3


From ac2536109849217a71510b6ded813e91629e88f6 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Thu, 10 Jul 2008 20:17:27 +0100
Subject: Support for LCD on e740 e750 e400 and e800 e-series PDAs

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/Kconfig    |   3 +
 arch/arm/mach-pxa/Makefile   |   4 ++
 arch/arm/mach-pxa/e400_lcd.c |  56 +++++++++++++++
 arch/arm/mach-pxa/e740_lcd.c | 123 +++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/e750_lcd.c | 109 +++++++++++++++++++++++++++++
 arch/arm/mach-pxa/e800_lcd.c | 159 +++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 454 insertions(+)
 create mode 100644 arch/arm/mach-pxa/e400_lcd.c
 create mode 100644 arch/arm/mach-pxa/e740_lcd.c
 create mode 100644 arch/arm/mach-pxa/e750_lcd.c
 create mode 100644 arch/arm/mach-pxa/e800_lcd.c

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 0c96229a2db..55e8d2f10dd 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -136,6 +136,7 @@ config MACH_E740
 	bool "Toshiba e740"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e740 family PDA.
@@ -144,6 +145,7 @@ config MACH_E750
 	bool "Toshiba e750"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e750 family PDA.
@@ -160,6 +162,7 @@ config MACH_E800
 	bool "Toshiba e800"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 9d4c3931d0e..f2b77ef43f2 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -37,6 +37,10 @@ obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740)		+= e740_lcd.o
+obj-$(CONFIG_MACH_E750)		+= e750_lcd.o
+obj-$(CONFIG_MACH_E400)		+= e400_lcd.o
+obj-$(CONFIG_MACH_E800)		+= e800_lcd.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
new file mode 100644
index 00000000000..16c02363062
--- /dev/null
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -0,0 +1,56 @@
+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+	if (!machine_is_e400())
+		return -ENODEV;
+
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
new file mode 100644
index 00000000000..26bd599af17
--- /dev/null
+++ b/arch/arm/mach-pxa/e740_lcd.c
@@ -0,0 +1,123 @@
+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+	int ret;
+
+	if (!machine_is_e740())
+		return -ENODEV;
+
+	return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750_lcd.c
new file mode 100644
index 00000000000..75edc3b5390
--- /dev/null
+++ b/arch/arm/mach-pxa/e750_lcd.c
@@ -0,0 +1,109 @@
+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+	if (!machine_is_e750())
+		return -ENODEV;
+
+	return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c
new file mode 100644
index 00000000000..e6aeab0ebc2
--- /dev/null
+++ b/arch/arm/mach-pxa/e800_lcd.c
@@ -0,0 +1,159 @@
+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+		.pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+	if (!machine_is_e800())
+		return -ENODEV;
+
+	return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");
-- 
cgit v1.2.3


From 72289824423655e67993c25c91a7a86a34917209 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Thu, 3 Jul 2008 23:54:42 -0700
Subject: [MTD] m25p80: fix bug - ATmel spi flash fails to be copied to

Atmel serial flash tends to power up with the protection status bits set.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=4089

[michael.hennerich@analog.com: remove duplicate code]
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/devices/m25p80.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index b402269301f..b35c3333e21 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -33,6 +33,7 @@
 /* Flash opcodes. */
 #define	OPCODE_WREN		0x06	/* Write enable */
 #define	OPCODE_RDSR		0x05	/* Read status register */
+#define	OPCODE_WRSR		0x01	/* Write status register 1 byte */
 #define	OPCODE_NORM_READ	0x03	/* Read data bytes (low frequency) */
 #define	OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */
 #define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
@@ -112,6 +113,17 @@ static int read_sr(struct m25p *flash)
 	return val;
 }
 
+/*
+ * Write status register 1 byte
+ * Returns negative if error occurred.
+ */
+static int write_sr(struct m25p *flash, u8 val)
+{
+	flash->command[0] = OPCODE_WRSR;
+	flash->command[1] = val;
+
+	return spi_write(flash->spi, flash->command, 2);
+}
 
 /*
  * Set write enable latch with Write Enable command.
@@ -589,6 +601,16 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	mutex_init(&flash->lock);
 	dev_set_drvdata(&spi->dev, flash);
 
+	/*
+	 * Atmel serial flash tend to power up
+	 * with the software protection bits set
+	 */
+
+	if (info->jedec_id >> 16 == 0x1f) {
+		write_enable(flash);
+		write_sr(flash, 0);
+	}
+
 	if (data && data->name)
 		flash->mtd.name = data->name;
 	else
-- 
cgit v1.2.3


From 5f6928378b165c4b0d57a711e1c1eb925ad33846 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Thu, 3 Jul 2008 23:40:13 -0700
Subject: [MTD] mtdchar.c silence sparse warning

The copy_to_user was casting away the address space to get the offset of
the length member.  Use offsetof() instead and add it to the void __user
*argp.

drivers/mtd/mtdchar.c:527:23: warning: cast removes address space of expression
drivers/mtd/mtdchar.c:527:23: warning: incorrect type in argument 1 (different address spaces)
drivers/mtd/mtdchar.c:527:23:    expected void [noderef] <asn:1>*to
drivers/mtd/mtdchar.c:527:23:    got unsigned int *<noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdchar.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 4b3156f9b36..5fc2c4216c0 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -479,6 +479,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 	{
 		struct mtd_oob_buf buf;
 		struct mtd_oob_ops ops;
+		struct mtd_oob_buf __user *user_buf = argp;
 	        uint32_t retlen;
 
 		if(!(file->f_mode & 2))
@@ -522,8 +523,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 		if (ops.oobretlen > 0xFFFFFFFFU)
 			ret = -EOVERFLOW;
 		retlen = ops.oobretlen;
-		if (copy_to_user(&((struct mtd_oob_buf *)argp)->length,
-				 &retlen, sizeof(buf.length)))
+		if (copy_to_user(&user_buf->length, &retlen, sizeof(buf.length)))
 			ret = -EFAULT;
 
 		kfree(ops.oobbuf);
-- 
cgit v1.2.3


From 175428b2b3eeacf90dcc171d5915d6b4dc86e917 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Thu, 3 Jul 2008 23:40:14 -0700
Subject: [MTD] mtdchar.c remove shadowed variable warnings

Use einfo, oinfo for the inner erase_info and otp_info structs used in
individual case statements.

drivers/mtd/mtdchar.c:582:26: warning: symbol 'info' shadows an earlier one
drivers/mtd/mtdchar.c:380:23: originally declared here
drivers/mtd/mtdchar.c:596:26: warning: symbol 'info' shadows an earlier one
drivers/mtd/mtdchar.c:380:23: originally declared here
drivers/mtd/mtdchar.c:704:19: warning: symbol 'info' shadows an earlier one
drivers/mtd/mtdchar.c:380:23: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdchar.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 5fc2c4216c0..f5061fe72e4 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -577,29 +577,29 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
 	case MEMLOCK:
 	{
-		struct erase_info_user info;
+		struct erase_info_user einfo;
 
-		if (copy_from_user(&info, argp, sizeof(info)))
+		if (copy_from_user(&einfo, argp, sizeof(einfo)))
 			return -EFAULT;
 
 		if (!mtd->lock)
 			ret = -EOPNOTSUPP;
 		else
-			ret = mtd->lock(mtd, info.start, info.length);
+			ret = mtd->lock(mtd, einfo.start, einfo.length);
 		break;
 	}
 
 	case MEMUNLOCK:
 	{
-		struct erase_info_user info;
+		struct erase_info_user einfo;
 
-		if (copy_from_user(&info, argp, sizeof(info)))
+		if (copy_from_user(&einfo, argp, sizeof(einfo)))
 			return -EFAULT;
 
 		if (!mtd->unlock)
 			ret = -EOPNOTSUPP;
 		else
-			ret = mtd->unlock(mtd, info.start, info.length);
+			ret = mtd->unlock(mtd, einfo.start, einfo.length);
 		break;
 	}
 
@@ -699,15 +699,15 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
 	case OTPLOCK:
 	{
-		struct otp_info info;
+		struct otp_info oinfo;
 
 		if (mfi->mode != MTD_MODE_OTP_USER)
 			return -EINVAL;
-		if (copy_from_user(&info, argp, sizeof(info)))
+		if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
 			return -EFAULT;
 		if (!mtd->lock_user_prot_reg)
 			return -EOPNOTSUPP;
-		ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
+		ret = mtd->lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
 		break;
 	}
 #endif
-- 
cgit v1.2.3


From 23a346ca4a5a6f50f81062456af955155f68e313 Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Thu, 3 Jul 2008 23:40:16 -0700
Subject: [MTD] [NAND] atmel_nand speedup via {read,write}s{b,w}()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This uses __raw_{read,write}s{b,w}() primitives to access data on NAND
chips for more efficient I/O.

On an arm926 with memory clocked at 100 MHz, this reduced the elapsed time
for a 64 MiB read by 16%.  ("dd" /dev/mtd0 to /dev/null, with an 8-bit
NAND using hardware ECC and 128KiB blocksize.)

Also some minor section tweaks:

  - Use platform_driver_probe() so no pointer to probe() lingers
    after that code has been removed at run-time.

  - Use __exit and __exit_p so the remove() code will normally be
    removed by the linker.

Since these buffer read/write calls are new, this increases the runtime
code footprint (by 88 bytes on my build, after the section tweaks).

[haavard.skinnemoen@atmel.com: rebase onto atmel_nand rename]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/atmel_nand.c | 46 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 41 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 50700ab5a57..4814fc9b237 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -141,6 +141,37 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
 	return gpio_get_value(host->board->rdy_pin);
 }
 
+/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
+}
+
 /*
  * write oob for small pages
  */
@@ -436,8 +467,14 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	nand_chip->chip_delay = 20;		/* 20us command delay time */
 
-	if (host->board->bus_width_16)		/* 16-bit bus width */
+	if (host->board->bus_width_16) {	/* 16-bit bus width */
 		nand_chip->options |= NAND_BUSWIDTH_16;
+		nand_chip->read_buf = atmel_read_buf16;
+		nand_chip->write_buf = atmel_write_buf16;
+	} else {
+		nand_chip->read_buf = atmel_read_buf;
+		nand_chip->write_buf = atmel_write_buf;
+	}
 
 	platform_set_drvdata(pdev, host);
 	atmel_nand_enable(host);
@@ -546,7 +583,7 @@ err_nand_ioremap:
 /*
  * Remove a NAND device.
  */
-static int __devexit atmel_nand_remove(struct platform_device *pdev)
+static int __exit atmel_nand_remove(struct platform_device *pdev)
 {
 	struct atmel_nand_host *host = platform_get_drvdata(pdev);
 	struct mtd_info *mtd = &host->mtd;
@@ -564,8 +601,7 @@ static int __devexit atmel_nand_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver atmel_nand_driver = {
-	.probe		= atmel_nand_probe,
-	.remove		= atmel_nand_remove,
+	.remove		= __exit_p(atmel_nand_remove),
 	.driver		= {
 		.name	= "atmel_nand",
 		.owner	= THIS_MODULE,
@@ -574,7 +610,7 @@ static struct platform_driver atmel_nand_driver = {
 
 static int __init atmel_nand_init(void)
 {
-	return platform_driver_register(&atmel_nand_driver);
+	return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
 }
 
 
-- 
cgit v1.2.3


From d6248fddf717041f25781050e6392cc76525272d Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Thu, 3 Jul 2008 23:40:18 -0700
Subject: [MTD] [NAND] atmel_nand: Work around AT32AP7000 ECC erratum
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The ALE signal isn't correctly wired up to the ECC controller on the
AP7000, so it starts calculating ECC during the address cycles.

Work around this by resetting the ECC controller between the address and
data cycles.

Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/atmel_nand.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 4814fc9b237..99aec46e214 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -33,6 +33,7 @@
 #include <linux/io.h>
 
 #include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
 
 #ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
 #define hard_ecc	1
@@ -264,6 +265,19 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
 	uint8_t *ecc_pos;
 	int stat;
 
+	/*
+	 * Errata: ALE is incorrectly wired up to the ECC controller
+	 * on the AP7000, so it will include the address cycles in the
+	 * ECC calculation.
+	 *
+	 * Workaround: Reset the parity registers before reading the
+	 * actual data.
+	 */
+	if (cpu_is_at32ap7000()) {
+		struct atmel_nand_host *host = chip->priv;
+		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+	}
+
 	/* read the page */
 	chip->read_buf(mtd, p, eccsize);
 
@@ -377,9 +391,16 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 }
 
 /*
- * Enable HW ECC : unsused
+ * Enable HW ECC : unused on most chips
  */
-static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+	if (cpu_is_at32ap7000()) {
+		struct nand_chip *nand_chip = mtd->priv;
+		struct atmel_nand_host *host = nand_chip->priv;
+		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+	}
+}
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { "cmdlinepart", NULL };
-- 
cgit v1.2.3


From bd5a43822b438f297f4088f1cfd3514e32e56328 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 3 Jul 2008 23:40:19 -0700
Subject: [MTD] [NAND] atmel_nand can be modular
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

There's no reason to prevent the Atmel NAND driver from
building as a module.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: HÃ¥vard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index d8c0d8698b4..71406e51785 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -272,7 +272,7 @@ config MTD_NAND_CS553X
 	  If you say "m", the module will be called "cs553x_nand.ko".
 
 config MTD_NAND_ATMEL
-	bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
+	tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
 	depends on ARCH_AT91 || AVR32
 	help
 	  Enables support for NAND Flash / Smart Media Card interface
-- 
cgit v1.2.3


From 452db2724351ff3d9416a183a7955e00ab4e6ab4 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 27 Jun 2008 23:04:04 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND
 chips

For large page chips, nand_bbt is looking into OOB area, and checking
for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
reserved for bbt means.

But ELBC driver is specifying ecclayout so that oobfree area starts at
offset 1, so only one byte left for the bbt purposes.

This causes problems with any OOB users, namely JFFS2: after first mount
JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:

  OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

And on the next boot, NAND core will rescan for bad blocks, then will
see "0xff 0x19" pattern, and will mark all blocks as bad ones.

To fix the issue we should implement our own bad block pattern: just one
byte at OOB start. Though, this will work only for x8 chips. For x16
chips two bytes must be checked. Since ELBC driver does not support x16
NANDs (yet), we're safe for now.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 1b06d29dd06..99dc2be620a 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -116,6 +116,20 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
 	.oobavail = 48,
 };
 
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+	.options = 0,
+	.offs = 0,
+	.len = 1,
+	.pattern = scan_ff_pattern,
+};
+
 /*=================================*/
 
 /*
@@ -687,6 +701,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 			chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
 			                   &fsl_elbc_oob_lp_eccm1 :
 			                   &fsl_elbc_oob_lp_eccm0;
+			chip->badblock_pattern = &largepage_memorybased;
 			mtd->ecclayout = chip->ecc.layout;
 			mtd->oobavail = chip->ecc.layout->oobavail;
 		}
-- 
cgit v1.2.3


From ec6e0ea3bdf82ee9761d324c011c3627821f7410 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 27 Jun 2008 23:04:13 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT

This patch implements support for flash-based BBT for chips working
through ELBC NAND controller, so that NAND core will not have to re-scan
for bad blocks on every boot.

Because ELBC controller may provide HW-generated ECCs we should adjust
bbt pattern and bbt version positions in the OOB free area.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 99dc2be620a..5f1bc5ea2a7 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -130,6 +130,34 @@ static struct nand_bbt_descr largepage_memorybased = {
 	.pattern = scan_ff_pattern,
 };
 
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = mirror_pattern,
+};
+
 /*=================================*/
 
 /*
@@ -767,8 +795,12 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	chip->cmdfunc = fsl_elbc_cmdfunc;
 	chip->waitfunc = fsl_elbc_wait;
 
+	chip->bbt_td = &bbt_main_descr;
+	chip->bbt_md = &bbt_mirror_descr;
+
 	/* set up nand options */
-	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+			NAND_USE_FLASH_BBT;
 
 	chip->controller = &ctrl->controller;
 	chip->priv = priv;
-- 
cgit v1.2.3


From 0acf944c6853813ed19cdf46d4042a77dd878ab5 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 27 Jun 2008 23:04:20 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: ecclayout cleanups

This patch deletes oobavail assignments, they're calculated by the nand
core code in nand_scan_tail, plus current oobavail values are wrong for
the LP NANDs.

Also remove mtd->ecclayout and mtd->oobavail assignments, mtd core
handles this all by itself.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 5f1bc5ea2a7..d6d1ff55c4e 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -89,7 +89,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
 	.eccbytes = 3,
 	.eccpos = {6, 7, 8},
 	.oobfree = { {0, 5}, {9, 7} },
-	.oobavail = 12,
 };
 
 /* Small Page FLASH with FMR[ECCM] = 1 */
@@ -97,7 +96,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
 	.eccbytes = 3,
 	.eccpos = {8, 9, 10},
 	.oobfree = { {0, 5}, {6, 2}, {11, 5} },
-	.oobavail = 12,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 0 */
@@ -105,7 +103,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
 	.eccbytes = 12,
 	.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
 	.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-	.oobavail = 48,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 1 */
@@ -113,7 +110,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
 	.eccbytes = 12,
 	.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
 	.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
-	.oobavail = 48,
 };
 
 /*
@@ -730,8 +726,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 			                   &fsl_elbc_oob_lp_eccm1 :
 			                   &fsl_elbc_oob_lp_eccm0;
 			chip->badblock_pattern = &largepage_memorybased;
-			mtd->ecclayout = chip->ecc.layout;
-			mtd->oobavail = chip->ecc.layout->oobavail;
 		}
 	} else {
 		dev_err(ctrl->dev,
-- 
cgit v1.2.3


From 6f40470e745693ee4ad85edb441b0aad5cae3f00 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 9 Jul 2008 14:09:20 +0100
Subject: [MTD] [MAPS] Remove the bast-flash driver.

Remove the Simtec BAST flash driver as this has been replaced by using
the platform flash driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/maps/Kconfig      |  18 ----
 drivers/mtd/maps/Makefile     |   1 -
 drivers/mtd/maps/bast-flash.c | 224 ------------------------------------------
 3 files changed, 243 deletions(-)
 delete mode 100644 drivers/mtd/maps/bast-flash.c

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index d2d339a7598..ef1e29ea5a2 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -556,24 +556,6 @@ config MTD_DMV182
         help
           Map driver for Dy-4 SVME/DMV-182 board.
 
-config MTD_BAST
-	tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
-	depends on ARCH_BAST || MACH_VR1000
-	select MTD_PARTITIONS
-	select MTD_MAP_BANK_WIDTH_16
-	select MTD_JEDECPROBE
-	help
-	  Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
-	  Thorcom VR1000
-
-	  Note, this driver *cannot* over-ride the WP link on the
-	  board, or currently detect the state of the link.
-
-config MTD_BAST_MAXSIZE
-	int "Maximum size for BAST flash area (MiB)"
-	depends on MTD_BAST
-	default "4"
-
 config MTD_SHARP_SL
 	tristate "ROM mapped on Sharp SL Series"
 	depends on ARCH_PXA
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index f3b0c595166..b29ea546065 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -9,7 +9,6 @@ endif
 # Chip mappings
 obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
-obj-$(CONFIG_MTD_BAST)		+= bast-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
 obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
 obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
deleted file mode 100644
index ca541488034..00000000000
--- a/drivers/mtd/maps/bast-flash.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* linux/drivers/mtd/maps/bast-flash.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Bast (EB2410ITX) NOR MTD Mapping driver
- *
- * Changelog:
- *	20-Sep-2004  BJD  Initial version
- *	17-Jan-2005  BJD  Add whole device if no partitions found
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/mach/flash.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
-
-#ifdef CONFIG_MTD_BAST_MAXSIZE
-#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * SZ_1M)
-#else
-#define AREA_MAXSIZE (32 * SZ_1M)
-#endif
-
-#define PFX "bast-flash: "
-
-struct bast_flash_info {
-	struct mtd_info		*mtd;
-	struct map_info		 map;
-	struct mtd_partition	*partitions;
-	struct resource		*area;
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static void bast_flash_setrw(int to)
-{
-	unsigned int val;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	val = __raw_readb(BAST_VA_CTRL3);
-
-	if (to)
-		val |= BAST_CPLD_CTRL3_ROMWEN;
-	else
-		val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
-	pr_debug("new cpld ctrl3=%02x\n", val);
-
-	__raw_writeb(val, BAST_VA_CTRL3);
-	local_irq_restore(flags);
-}
-
-static int bast_flash_remove(struct platform_device *pdev)
-{
-	struct bast_flash_info *info = platform_get_drvdata(pdev);
-
-	platform_set_drvdata(pdev, NULL);
-
-	if (info == NULL)
-		return 0;
-
-	if (info->map.virt != NULL)
-		iounmap(info->map.virt);
-
-	if (info->mtd) {
-		del_mtd_partitions(info->mtd);
-		map_destroy(info->mtd);
-	}
-
-	kfree(info->partitions);
-
-	if (info->area) {
-		release_resource(info->area);
-		kfree(info->area);
-	}
-
-	kfree(info);
-
-	return 0;
-}
-
-static int bast_flash_probe(struct platform_device *pdev)
-{
-	struct bast_flash_info *info;
-	struct resource *res;
-	int err = 0;
-
-	info = kmalloc(sizeof(*info), GFP_KERNEL);
-	if (info == NULL) {
-		printk(KERN_ERR PFX "no memory for flash info\n");
-		err = -ENOMEM;
-		goto exit_error;
-	}
-
-	memzero(info, sizeof(*info));
-	platform_set_drvdata(pdev, info);
-
-	res = pdev->resource;  /* assume that the flash has one resource */
-
-	info->map.phys = res->start;
-	info->map.size = res->end - res->start + 1;
-	info->map.name = pdev->dev.bus_id;
-	info->map.bankwidth = 2;
-
-	if (info->map.size > AREA_MAXSIZE)
-		info->map.size = AREA_MAXSIZE;
-
-	pr_debug("%s: area %08lx, size %ld\n", __func__,
-		 info->map.phys, info->map.size);
-
-	info->area = request_mem_region(res->start, info->map.size,
-					pdev->name);
-	if (info->area == NULL) {
-		printk(KERN_ERR PFX "cannot reserve flash memory region\n");
-		err = -ENOENT;
-		goto exit_error;
-	}
-
-	info->map.virt = ioremap(res->start, info->map.size);
-	pr_debug("%s: virt at %08x\n", __func__, (int)info->map.virt);
-
-	if (info->map.virt == 0) {
-		printk(KERN_ERR PFX "failed to ioremap() region\n");
-		err = -EIO;
-		goto exit_error;
-	}
-
-	simple_map_init(&info->map);
-
-	/* enable the write to the flash area */
-
-	bast_flash_setrw(1);
-
-	/* probe for the device(s) */
-
-	info->mtd = do_map_probe("jedec_probe", &info->map);
-	if (info->mtd == NULL)
-		info->mtd = do_map_probe("cfi_probe", &info->map);
-
-	if (info->mtd == NULL) {
-		printk(KERN_ERR PFX "map_probe() failed\n");
-		err = -ENXIO;
-		goto exit_error;
-	}
-
-	/* mark ourselves as the owner */
-	info->mtd->owner = THIS_MODULE;
-
-	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
-	if (err > 0) {
-		err = add_mtd_partitions(info->mtd, info->partitions, err);
-		if (err)
-			printk(KERN_ERR PFX "cannot add/parse partitions\n");
-	} else {
-		err = add_mtd_device(info->mtd);
-	}
-
-	if (err == 0)
-		return 0;
-
-	/* fall through to exit error */
-
- exit_error:
-	bast_flash_remove(pdev);
-	return err;
-}
-
-static struct platform_driver bast_flash_driver = {
-	.probe		= bast_flash_probe,
-	.remove		= bast_flash_remove,
-	.driver		= {
-		.name	= "bast-nor",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init bast_flash_init(void)
-{
-	printk("BAST NOR-Flash Driver, (c) 2004 Simtec Electronics\n");
-	return platform_driver_register(&bast_flash_driver);
-}
-
-static void __exit bast_flash_exit(void)
-{
-	platform_driver_unregister(&bast_flash_driver);
-}
-
-module_init(bast_flash_init);
-module_exit(bast_flash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("BAST MTD Map driver");
-MODULE_ALIAS("platform:bast-nor");
-- 
cgit v1.2.3


From f63af11ddb508ce7b2a270515244d145248cad7f Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Thu, 10 Jul 2008 16:14:18 -0500
Subject: [MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers

Such a hardcoded address can cause a checkstop or machine check if
the driver is in the kernel but the address is not acknowledged.

Both drivers allow an address to be specified as either a module
parameter or config option.   Any future powerpc board should either
use one of these methods or find the address in the device tree.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/devices/docprobe.c | 2 --
 drivers/mtd/nand/diskonchip.c  | 2 --
 2 files changed, 4 deletions(-)

diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index 6e5d811ae83..6e62922942b 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -76,8 +76,6 @@ static unsigned long __initdata doc_locations[] = {
 	0xe0000, 0xe2000, 0xe4000, 0xe6000,
 	0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
-	0xe4000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index cd4393ce256..765d4f0f7c8 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -52,8 +52,6 @@ static unsigned long __initdata doc_locations[] = {
 	0xe0000, 0xe2000, 0xe4000, 0xe6000,
 	0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
-	0xe4000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
-- 
cgit v1.2.3


From 3a3688b6af103e2c86a7cfc2050988655e184ecc Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Thu, 10 Jul 2008 13:37:08 +0200
Subject: [MTD] [NOR] gen_probe: No debug message when debugging is disabled

Use pr_debug(...) instead of printk(KERN_DEBUG ...) so that the message
is only printed when debugging is enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: John stoffel <john@stoffel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/chips/gen_probe.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index e53a58ae384..f061885b281 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -70,8 +70,8 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	   interleave and device type, etc. */
 	if (!genprobe_new_chip(map, cp, &cfi)) {
 		/* The probe didn't like it */
-		printk(KERN_DEBUG "%s: Found no %s device at location zero\n",
-		       cp->name, map->name);
+		pr_debug("%s: Found no %s device at location zero\n",
+			 cp->name, map->name);
 		return NULL;
 	}
 
-- 
cgit v1.2.3


From 36560d255b017dbcaefbf0f8fee7ad4dd1f0fe0a Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 8 Jul 2008 17:09:03 +0100
Subject: [MTD] Fix const assignment in the MTD command line partitioning
 driver

Fix const to non-const pointer assignment in the MTD command line partitioning
driver.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/cmdlinepart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 68782ab2f0d..71bc07f149b 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -306,7 +306,7 @@ static int parse_cmdline_partitions(struct mtd_info *master,
 	unsigned long offset;
 	int i;
 	struct cmdline_mtd_partition *part;
-	char *mtd_id = master->name;
+	const char *mtd_id = master->name;
 
 	/* parse command line */
 	if (!cmdline_parsed)
-- 
cgit v1.2.3


From 0533400b7813df6c22a171499434d30bd57e799c Mon Sep 17 00:00:00 2001
From: Stoyan Gaydarov <stoyboyker@gmail.com>
Date: Mon, 7 Jul 2008 07:45:59 -0500
Subject: [JFFS2] Use .unlocked_ioctl

This changes the .ioctl to the .unlocked_ioctl version.

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 fs/jffs2/dir.c      | 2 +-
 fs/jffs2/file.c     | 2 +-
 fs/jffs2/ioctl.c    | 3 +--
 fs/jffs2/os-linux.h | 2 +-
 4 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index c0c141f6fde..cd219ef5525 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -38,7 +38,7 @@ const struct file_operations jffs2_dir_operations =
 {
 	.read =		generic_read_dir,
 	.readdir =	jffs2_readdir,
-	.ioctl =	jffs2_ioctl,
+	.unlocked_ioctl=jffs2_ioctl,
 	.fsync =	jffs2_fsync
 };
 
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 5e920343b2c..5a98aa87c85 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -46,7 +46,7 @@ const struct file_operations jffs2_file_operations =
  	.aio_read =	generic_file_aio_read,
  	.write =	do_sync_write,
  	.aio_write =	generic_file_aio_write,
-	.ioctl =	jffs2_ioctl,
+	.unlocked_ioctl=jffs2_ioctl,
 	.mmap =		generic_file_readonly_mmap,
 	.fsync =	jffs2_fsync,
 	.splice_read =	generic_file_splice_read,
diff --git a/fs/jffs2/ioctl.c b/fs/jffs2/ioctl.c
index e2177210f62..9d41f43e47b 100644
--- a/fs/jffs2/ioctl.c
+++ b/fs/jffs2/ioctl.c
@@ -12,8 +12,7 @@
 #include <linux/fs.h>
 #include "nodelist.h"
 
-int jffs2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-		unsigned long arg)
+long jffs2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	/* Later, this will provide for lsattr.jffs2 and chattr.jffs2, which
 	   will include compression support etc. */
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 2cc866cf134..5e194a5c8e2 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -167,7 +167,7 @@ int jffs2_fsync(struct file *, struct dentry *, int);
 int jffs2_do_readpage_unlock (struct inode *inode, struct page *pg);
 
 /* ioctl.c */
-int jffs2_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+long jffs2_ioctl(struct file *, unsigned int, unsigned long);
 
 /* symlink.c */
 extern const struct inode_operations jffs2_symlink_inode_operations;
-- 
cgit v1.2.3


From 0fc3ff31f1f0fa023bb61e9336a7aa3591f2dffe Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 2 Jul 2008 13:54:46 +0100
Subject: [ARM] 5146/1: pxa2xx: convert all boards to call
 pxa2xx_transceiver_mode helper

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/corgi.c     |  1 +
 arch/arm/mach-pxa/lubbock.c   |  1 +
 arch/arm/mach-pxa/magician.c  |  1 +
 arch/arm/mach-pxa/mainstone.c |  1 +
 arch/arm/mach-pxa/poodle.c    |  1 +
 arch/arm/mach-pxa/spitz.c     |  2 ++
 arch/arm/mach-pxa/tosa.c      | 18 +++++-------------
 arch/arm/mach-pxa/trizeps4.c  |  1 +
 8 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b37671b7188..e58504edb14 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -465,6 +465,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
 		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
 	else
 		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e041cceab16..3daffbe7bb8 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -462,6 +462,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		LUB_MISC_WR |= 1 << 4;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	local_irq_restore(flags);
 }
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index bad5821be41..c9d274f0048 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -132,6 +132,7 @@ static unsigned long magician_pin_config[] __initdata = {
 static void magician_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data magician_ficp_info = {
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f2e9e7c4da8..8cd3f81558c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -455,6 +455,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
 	} else {
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f81c10cafd4..39612cfa0b4 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -267,6 +267,7 @@ static void poodle_irda_transceiver_mode(struct device *dev, int mode)
 	} else {
 		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d58c3e906a9..762249c03de 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -451,6 +451,7 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
 	else
 		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
@@ -460,6 +461,7 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode)
 		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
 	else
 		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 2d49de572ba..fea17ce6b55 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -149,19 +149,12 @@ static unsigned long tosa_pin_config[] = {
 	GPIO81_SSP2_CLK_OUT,
 	GPIO82_SSP2_FRM_OUT,
 	GPIO83_SSP2_TXD,
-};
-
-static unsigned long tosa_pin_irda_off[] = {
-	GPIO46_STUART_RXD,
-	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
-};
 
-static unsigned long tosa_pin_irda_on[] = {
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
+	/* IrDA is managed in other way */
+	GPIO46_GPIO,
+	GPIO47_GPIO,
 };
 
-
 /*
  * SCOOP Device
  */
@@ -360,10 +353,10 @@ static void tosa_irda_transceiver_mode(struct device *dev, int mode)
 {
 	if (mode & IR_OFF) {
 		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
+		pxa2xx_transceiver_mode(dev, mode);
 		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
 	} else {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_on));
+		pxa2xx_transceiver_mode(dev, mode);
 		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
 	}
 }
@@ -775,7 +768,6 @@ static void __init tosa_init(void)
 	int dummy;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 61e24402308..dee7bf36f01 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -254,6 +254,7 @@ static void board_irda_mode(struct device *dev, int mode)
 		/* Fast mode */
 		trizeps_conxs_ircr |= ConXS_IRCR_MODE;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		trizeps_conxs_ircr |= ConXS_IRCR_SD;
 	} else {
-- 
cgit v1.2.3


From d280eadc4fba0bf99fb1c3b60e8c5e007f7da02c Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 6 Jun 2008 17:13:02 +0800
Subject: [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata"

IRQ trigger type can be specified in the IRQ resource definition by
IORESOURCE_IRQ_*, we need only one way to specify this.

This also fixes the following small issue:

To allow dynamic support for multiple platforms, when those relevant
macros are not defined for one specific platform, the default case
will be:

	- SMC_DYNAMIC_BUS_CONFIG defined
	- and SMC_IRQ_FLAGS = IRQF_TRIGGER_RISING

While if "irq_flags" is missing when defining the smc91x_platdata,
usually as follows:

  static struct smc91x_platdata xxxx_smc91x_data = {
	.flags	= SMC91X_USE_XXBIT,
  };

The lp->cfg.irq_flags will always be overriden by the above structure
(due to a memcpy), thus rendering lp->cfg.irq_flags to be "0" always.
(regardless of the default SMC_IRQ_FLAGS or IORESOURCE_IRQ_* flags)

Fixes this by forcing to use IORESOURCE_IRQ_* flags if present, and
make the only user of smc91x_platdata.irq_flags (renesas/migor) to
use IORESOURCE_IRQ_*.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/sh/boards/renesas/migor/setup.c | 3 +--
 drivers/net/smc91x.c                 | 9 +++++----
 include/linux/smc91x.h               | 1 -
 3 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 01af44245b5..963c9932209 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -30,7 +30,6 @@
 
 static struct smc91x_platdata smc91x_info = {
 	.flags = SMC91X_USE_16BIT,
-	.irq_flags = IRQF_TRIGGER_HIGH,
 };
 
 static struct resource smc91x_eth_resources[] = {
@@ -42,7 +41,7 @@ static struct resource smc91x_eth_resources[] = {
 	},
 	[1] = {
 		.start  = 32, /* IRQ0 */
-		.flags  = IORESOURCE_IRQ,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
 
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index f2051b209da..e4a6c361995 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2123,6 +2123,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 	struct net_device *ndev;
 	struct resource *res, *ires;
 	unsigned int __iomem *addr;
+	unsigned long irq_flags = SMC_IRQ_FLAGS;
 	int ret;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
@@ -2152,7 +2153,6 @@ static int smc_drv_probe(struct platform_device *pdev)
 	 */
 
 	lp = netdev_priv(ndev);
-	lp->cfg.irq_flags = SMC_IRQ_FLAGS;
 
 #ifdef SMC_DYNAMIC_BUS_CONFIG
 	if (pd)
@@ -2177,8 +2177,9 @@ static int smc_drv_probe(struct platform_device *pdev)
 	}
 
 	ndev->irq = ires->start;
-	if (SMC_IRQ_FLAGS == -1)
-		lp->cfg.irq_flags = ires->flags & IRQF_TRIGGER_MASK;
+
+	if (ires->flags & IRQF_TRIGGER_MASK)
+		irq_flags = ires->flags & IRQF_TRIGGER_MASK;
 
 	ret = smc_request_attrib(pdev);
 	if (ret)
@@ -2205,7 +2206,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 	}
 #endif
 
-	ret = smc_probe(ndev, addr, lp->cfg.irq_flags);
+	ret = smc_probe(ndev, addr, irq_flags);
 	if (ret != 0)
 		goto out_iounmap;
 
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index 8e0556b8781..fc7682f04d8 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -7,7 +7,6 @@
 
 struct smc91x_platdata {
 	unsigned long flags;
-	unsigned long irq_flags; /* IRQF_... */
 };
 
 #endif /* __SMC91X_H__ */
-- 
cgit v1.2.3


From fa6d3be08538bb80274d20c7e59f9beca48fa44a Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 19 Jun 2008 17:19:57 +0800
Subject: [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_*

Let's simplify the logic and avoid confusion, the use of SMC91X_USE_*
is favored than SMC_CAN_USE_*, if platform data isn't given, convert
the hardcoded SMC_CAN_USE_* to SMC91X_USE_*.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/net/smc91x.c | 12 +++---------
 drivers/net/smc91x.h | 13 +++----------
 2 files changed, 6 insertions(+), 19 deletions(-)

diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index e4a6c361995..1b19022b6c7 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2154,20 +2154,14 @@ static int smc_drv_probe(struct platform_device *pdev)
 
 	lp = netdev_priv(ndev);
 
-#ifdef SMC_DYNAMIC_BUS_CONFIG
 	if (pd)
 		memcpy(&lp->cfg, pd, sizeof(lp->cfg));
 	else {
-		lp->cfg.flags = SMC91X_USE_8BIT;
-		lp->cfg.flags |= SMC91X_USE_16BIT;
-		lp->cfg.flags |= SMC91X_USE_32BIT;
+		lp->cfg.flags |= (SMC_CAN_USE_8BIT)  ? SMC91X_USE_8BIT  : 0;
+		lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0;
+		lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0;
 	}
 
-	lp->cfg.flags &= ~(SMC_CAN_USE_8BIT ? 0 : SMC91X_USE_8BIT);
-	lp->cfg.flags &= ~(SMC_CAN_USE_16BIT ? 0 : SMC91X_USE_16BIT);
-	lp->cfg.flags &= ~(SMC_CAN_USE_32BIT ? 0 : SMC91X_USE_32BIT);
-#endif
-
 	ndev->dma = (unsigned char)-1;
 
 	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 8606818653f..8310f1a073d 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -454,7 +454,6 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
 #define RPC_LSA_DEFAULT		RPC_LED_100_10
 #define RPC_LSB_DEFAULT		RPC_LED_TX_RX
 
-#define SMC_DYNAMIC_BUS_CONFIG
 #endif
 
 
@@ -504,15 +503,9 @@ struct smc_local {
 	struct smc91x_platdata cfg;
 };
 
-#ifdef SMC_DYNAMIC_BUS_CONFIG
-#define SMC_8BIT(p) (((p)->cfg.flags & SMC91X_USE_8BIT) && SMC_CAN_USE_8BIT)
-#define SMC_16BIT(p) (((p)->cfg.flags & SMC91X_USE_16BIT) && SMC_CAN_USE_16BIT)
-#define SMC_32BIT(p) (((p)->cfg.flags & SMC91X_USE_32BIT) && SMC_CAN_USE_32BIT)
-#else
-#define SMC_8BIT(p) SMC_CAN_USE_8BIT
-#define SMC_16BIT(p) SMC_CAN_USE_16BIT
-#define SMC_32BIT(p) SMC_CAN_USE_32BIT
-#endif
+#define SMC_8BIT(p)	((p)->cfg.flags & SMC91X_USE_8BIT)
+#define SMC_16BIT(p)	((p)->cfg.flags & SMC91X_USE_16BIT)
+#define SMC_32BIT(p)	((p)->cfg.flags & SMC91X_USE_32BIT)
 
 #ifdef SMC_USE_PXA_DMA
 /*
-- 
cgit v1.2.3


From c4f0e76747e80578a8f7fddd82fd0ce8127bd2f8 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 19 Jun 2008 17:39:03 +0800
Subject: [NET] smc91x: add SMC91X_NOWAIT flag to platform data

And also favors the usage of SMC91X_NOWAIT over the hardcoded SMC_NOWAIT
by converting "nowait" (module parameter overridable) to platform flag.

There are several possibilities:

  1. platform data present - preferred and use as is
  2. platform data absent  - use "nowait", it can be:
       a. SMC_NOWAIT if defined
       b. default to 0 if SMC_NOWAIT isn't defined
       c. overriden by module parameter

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/net/smc91x.c   | 3 ++-
 include/linux/smc91x.h | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 1b19022b6c7..de7a913c487 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -308,7 +308,7 @@ static void smc_reset(struct net_device *dev)
 	 * can't handle it then there will be no recovery except for
 	 * a hard reset or power cycle
 	 */
-	if (nowait)
+	if (lp->cfg.flags & SMC91X_NOWAIT)
 		cfg |= CONFIG_NO_WAIT;
 
 	/*
@@ -2160,6 +2160,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 		lp->cfg.flags |= (SMC_CAN_USE_8BIT)  ? SMC91X_USE_8BIT  : 0;
 		lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0;
 		lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0;
+		lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0;
 	}
 
 	ndev->dma = (unsigned char)-1;
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index fc7682f04d8..90434db72db 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -5,6 +5,8 @@
 #define SMC91X_USE_16BIT (1 << 1)
 #define SMC91X_USE_32BIT (1 << 2)
 
+#define SMC91X_NOWAIT		(1 << 3)
+
 struct smc91x_platdata {
 	unsigned long flags;
 };
-- 
cgit v1.2.3


From 159198862adad7109bb347bb30a620f67beac45f Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 24 Jun 2008 13:38:50 +0800
Subject: [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable
 variable

Now one can use the following code

  #define SMC_IO_SHIFT	lp->io_shift

to make SMC_IO_SHIFT a variable. This, however, will slightly increase
the CPU overhead and have negative impact on the network performance.
The tradeoff is, this can be specified in the smc91x platform data so
that multiple boards support can be built in a single zImage.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/net/smc91x.c   | 57 +++++++++++++++++++++++++++-----------------------
 drivers/net/smc91x.h   |  3 +++
 include/linux/smc91x.h |  7 +++++++
 3 files changed, 41 insertions(+), 26 deletions(-)

diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index de7a913c487..34bfc60e807 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2050,9 +2050,11 @@ static int smc_enable_device(struct platform_device *pdev)
 	return 0;
 }
 
-static int smc_request_attrib(struct platform_device *pdev)
+static int smc_request_attrib(struct platform_device *pdev,
+			      struct net_device *ndev)
 {
 	struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
+	struct smc_local *lp = netdev_priv(ndev);
 
 	if (!res)
 		return 0;
@@ -2063,9 +2065,11 @@ static int smc_request_attrib(struct platform_device *pdev)
 	return 0;
 }
 
-static void smc_release_attrib(struct platform_device *pdev)
+static void smc_release_attrib(struct platform_device *pdev,
+			       struct net_device *ndev)
 {
 	struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
+	struct smc_local *lp = netdev_priv(ndev);
 
 	if (res)
 		release_mem_region(res->start, ATTRIB_SIZE);
@@ -2126,25 +2130,11 @@ static int smc_drv_probe(struct platform_device *pdev)
 	unsigned long irq_flags = SMC_IRQ_FLAGS;
 	int ret;
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
-	if (!res)
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -ENODEV;
-		goto out;
-	}
-
-
-	if (!request_mem_region(res->start, SMC_IO_EXTENT, CARDNAME)) {
-		ret = -EBUSY;
-		goto out;
-	}
-
 	ndev = alloc_etherdev(sizeof(struct smc_local));
 	if (!ndev) {
 		printk("%s: could not allocate device.\n", CARDNAME);
 		ret = -ENOMEM;
-		goto out_release_io;
+		goto out;
 	}
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 
@@ -2154,9 +2144,10 @@ static int smc_drv_probe(struct platform_device *pdev)
 
 	lp = netdev_priv(ndev);
 
-	if (pd)
+	if (pd) {
 		memcpy(&lp->cfg, pd, sizeof(lp->cfg));
-	else {
+		lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags);
+	} else {
 		lp->cfg.flags |= (SMC_CAN_USE_8BIT)  ? SMC91X_USE_8BIT  : 0;
 		lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0;
 		lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0;
@@ -2165,10 +2156,24 @@ static int smc_drv_probe(struct platform_device *pdev)
 
 	ndev->dma = (unsigned char)-1;
 
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
+	if (!res)
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		goto out_free_netdev;
+	}
+
+
+	if (!request_mem_region(res->start, SMC_IO_EXTENT, CARDNAME)) {
+		ret = -EBUSY;
+		goto out_free_netdev;
+	}
+
 	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!ires) {
 		ret = -ENODEV;
-		goto out_free_netdev;
+		goto out_release_io;
 	}
 
 	ndev->irq = ires->start;
@@ -2176,9 +2181,9 @@ static int smc_drv_probe(struct platform_device *pdev)
 	if (ires->flags & IRQF_TRIGGER_MASK)
 		irq_flags = ires->flags & IRQF_TRIGGER_MASK;
 
-	ret = smc_request_attrib(pdev);
+	ret = smc_request_attrib(pdev, ndev);
 	if (ret)
-		goto out_free_netdev;
+		goto out_release_io;
 #if defined(CONFIG_SA1100_ASSABET)
 	NCR_0 |= NCR_ENET_OSC_EN;
 #endif
@@ -2213,11 +2218,11 @@ static int smc_drv_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	iounmap(addr);
  out_release_attrib:
-	smc_release_attrib(pdev);
- out_free_netdev:
-	free_netdev(ndev);
+	smc_release_attrib(pdev, ndev);
  out_release_io:
 	release_mem_region(res->start, SMC_IO_EXTENT);
+ out_free_netdev:
+	free_netdev(ndev);
  out:
 	printk("%s: not found (%d).\n", CARDNAME, ret);
 
@@ -2243,7 +2248,7 @@ static int smc_drv_remove(struct platform_device *pdev)
 	iounmap(lp->base);
 
 	smc_release_datacs(pdev,ndev);
-	smc_release_attrib(pdev);
+	smc_release_attrib(pdev,ndev);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
 	if (!res)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 8310f1a073d..80fb80f3920 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -500,6 +500,9 @@ struct smc_local {
 	void __iomem *base;
 	void __iomem *datacs;
 
+	/* the low address lines on some platforms aren't connected... */
+	int	io_shift;
+
 	struct smc91x_platdata cfg;
 };
 
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index 90434db72db..0dea9459a8e 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -7,6 +7,13 @@
 
 #define SMC91X_NOWAIT		(1 << 3)
 
+/* two bits for IO_SHIFT, let's hope later designs will keep this sane */
+#define SMC91X_IO_SHIFT_0	(0 << 4)
+#define SMC91X_IO_SHIFT_1	(1 << 4)
+#define SMC91X_IO_SHIFT_2	(2 << 4)
+#define SMC91X_IO_SHIFT_3	(3 << 4)
+#define SMC91X_IO_SHIFT(x)	(((x) >> 4) & 0x3)
+
 struct smc91x_platdata {
 	unsigned long flags;
 };
-- 
cgit v1.2.3


From 52256c0e06e4a4df67134b951a21b50c713a9588 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 24 Jun 2008 15:36:05 +0800
Subject: [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform
 data

Now that the original SMC_USE_PXA_DMA specific code will always being
built if CONFIG_ARCH_PXA is defined, so to make this part of the code
to be PXA public, and still prevent it from being built if support of
PXA is not selected.

A SMC91X_USE_DMA flag is added to the platform data to allow platform
to choose its usage of DMA. Note this flag itself is so named to be
generic enough (assuming other platforms can also use DMA).

It keeps backward compatibility to set the SMC91X_USE_DMA flag if
SMC_USE_PXA_DMA is still defined.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/net/smc91x.c   | 13 ++++++++-----
 drivers/net/smc91x.h   |  6 +++---
 include/linux/smc91x.h |  2 ++
 3 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 34bfc60e807..2040965d772 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1939,8 +1939,11 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
       	if (retval)
       		goto err_out;
 
-#ifdef SMC_USE_PXA_DMA
-	{
+#ifdef CONFIG_ARCH_PXA
+#  ifdef SMC_USE_PXA_DMA
+	lp->cfg.flags |= SMC91X_USE_DMA;
+#  endif
+	if (lp->cfg.flags & SMC91X_USE_DMA) {
 		int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW,
 					  smc_pxa_dma_irq, NULL);
 		if (dma >= 0)
@@ -1980,7 +1983,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	}
 
 err_out:
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 	if (retval && dev->dma != (unsigned char)-1)
 		pxa_free_dma(dev->dma);
 #endif
@@ -2198,7 +2201,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 		goto out_release_attrib;
 	}
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 	{
 		struct smc_local *lp = netdev_priv(ndev);
 		lp->device = &pdev->dev;
@@ -2241,7 +2244,7 @@ static int smc_drv_remove(struct platform_device *pdev)
 
 	free_irq(ndev->irq, ndev);
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 	if (ndev->dma != (unsigned char)-1)
 		pxa_free_dma(ndev->dma);
 #endif
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 80fb80f3920..f02cc6ac248 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -492,7 +492,7 @@ struct smc_local {
 
 	spinlock_t lock;
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 	/* DMA needs the physical address of the chip */
 	u_long physaddr;
 	struct device *device;
@@ -510,7 +510,7 @@ struct smc_local {
 #define SMC_16BIT(p)	((p)->cfg.flags & SMC91X_USE_16BIT)
 #define SMC_32BIT(p)	((p)->cfg.flags & SMC91X_USE_32BIT)
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 /*
  * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
  * always happening in irq context so no need to worry about races.  TX is
@@ -604,7 +604,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
 {
 	DCSR(dma) = 0;
 }
-#endif  /* SMC_USE_PXA_DMA */
+#endif  /* CONFIG_ARCH_PXA */
 
 
 /*
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index 0dea9459a8e..3827b922ba1 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -14,6 +14,8 @@
 #define SMC91X_IO_SHIFT_3	(3 << 4)
 #define SMC91X_IO_SHIFT(x)	(((x) >> 4) & 0x3)
 
+#define SMC91X_USE_DMA		(1 << 6)
+
 struct smc91x_platdata {
 	unsigned long flags;
 };
-- 
cgit v1.2.3


From 3aed74cdea09831db04bd0bdfc2f377f731c1879 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 24 Jun 2008 15:51:02 +0800
Subject: [ARM] pxa: make lubbock to use new smc91x platform data

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/lubbock.c | 8 ++++++++
 drivers/net/smc91x.h        | 3 +--
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 3daffbe7bb8..ac26423cd20 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -284,11 +285,18 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static struct smc91x_platdata lubbock_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &lubbock_smc91x_info,
+	},
 };
 
 static struct resource flash_resources[] = {
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index f02cc6ac248..a9c41d421c3 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -48,8 +48,7 @@
 #define SMC_CAN_USE_32BIT	0
 #define SMC_NOWAIT		1
 
-/* The first two address lines aren't connected... */
-#define SMC_IO_SHIFT		2
+#define SMC_IO_SHIFT		(lp->io_shift)
 
 #define SMC_inw(a, r)		readw((a) + (r))
 #define SMC_outw(v, a, r)	writew(v, (a) + (r))
-- 
cgit v1.2.3


From 38fd6c3846a5657ef6950e3c1582a866cf42888f Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 24 Jun 2008 16:14:26 +0800
Subject: [ARM] pxa: make mainstone to use the new smc91x platform data

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/mainstone.c |  9 +++++++++
 drivers/net/smc91x.h          | 33 +++++++++++++++++++++++++++------
 2 files changed, 36 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 14eac2287e3..851ec2d9b69 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,6 +26,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata mainstone_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &mainstone_smc91x_info,
+	},
 };
 
 static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index a9c41d421c3..5518c51bfd8 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -40,22 +40,44 @@
  * Define your architecture specific bus configuration parameters here.
  */
 
-#if	defined(CONFIG_ARCH_LUBBOCK)
+#if defined(CONFIG_ARCH_LUBBOCK) ||\
+    defined(CONFIG_MACH_MAINSTONE)
 
-/* We can only do 16-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT	0
+#include <asm/mach-types.h>
+
+/* Now the bus width is specified in the platform data
+ * pretend here to support all I/O access types
+ */
+#define SMC_CAN_USE_8BIT	1
 #define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
+#define SMC_CAN_USE_32BIT	1
 #define SMC_NOWAIT		1
 
 #define SMC_IO_SHIFT		(lp->io_shift)
 
+#define SMC_inb(a, r)		readb((a) + (r))
 #define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
+#define SMC_inl(a, r)		readl((a) + (r))
+#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
+#define SMC_outl(v, a, r)	writel(v, (a) + (r))
 #define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
 #define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
+#define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
+#define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
 #define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
+/* We actually can't write halfwords properly if not word aligned */
+static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
+{
+	if (machine_is_mainstone() && reg & 2) {
+		unsigned int v = val << 16;
+		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
+		writel(v, ioaddr + (reg & ~2));
+	} else {
+		writew(val, ioaddr + reg);
+	}
+}
+
 #elif defined(CONFIG_BLACKFIN)
 
 #define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
@@ -194,7 +216,6 @@
 #define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
 
 #elif	defined(CONFIG_ARCH_INNOKOM) || \
-	defined(CONFIG_MACH_MAINSTONE) || \
 	defined(CONFIG_ARCH_PXA_IDP) || \
 	defined(CONFIG_ARCH_RAMSES) || \
 	defined(CONFIG_ARCH_PCM027)
-- 
cgit v1.2.3


From 88c36eb73e1e71ea3ca16896d6478a65d230b44a Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 24 Jun 2008 16:47:37 +0800
Subject: [ARM] pxa: make zylonite to use the new smc91x platform data

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/zylonite.c |  9 +++++++++
 drivers/net/smc91x.h         | 19 ++-----------------
 2 files changed, 11 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 4a4711d36e7..8fca6d890b7 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -59,11 +60,19 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata zylonite_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &zylonite_smc91x_info,
+	},
 };
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 5518c51bfd8..273f90ac2cb 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -41,7 +41,8 @@
  */
 
 #if defined(CONFIG_ARCH_LUBBOCK) ||\
-    defined(CONFIG_MACH_MAINSTONE)
+    defined(CONFIG_MACH_MAINSTONE) ||\
+    defined(CONFIG_MACH_ZYLONITE)
 
 #include <asm/mach-types.h>
 
@@ -249,22 +250,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 	}
 }
 
-#elif defined(CONFIG_MACH_ZYLONITE)
-
-#define SMC_CAN_USE_8BIT        1
-#define SMC_CAN_USE_16BIT       1
-#define SMC_CAN_USE_32BIT       0
-#define SMC_IO_SHIFT            0
-#define SMC_NOWAIT              1
-#define SMC_USE_PXA_DMA		1
-#define SMC_inb(a, r)           readb((a) + (r))
-#define SMC_inw(a, r)           readw((a) + (r))
-#define SMC_insw(a, r, p, l)    insw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)   outsw((a) + (r), p, l)
-#define SMC_outb(v, a, r)       writeb(v, (a) + (r))
-#define SMC_outw(v, a, r)       writew(v, (a) + (r))
-#define SMC_IRQ_FLAGS		(-1)	/* from resource */
-
 #elif	defined(CONFIG_ARCH_OMAP)
 
 /* We can only do 16-bit reads and writes in the static memory space. */
-- 
cgit v1.2.3


From e1719da689378de5c252ea0f51f5f76cc75fd629 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 24 Jun 2008 16:49:41 +0800
Subject: [ARM] pxa: make littleton to use the new smc91x platform data

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/littleton.c | 9 +++++++++
 drivers/net/smc91x.h          | 3 ++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 9a4f51d4875..dd759d03a9f 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -106,11 +107,19 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &littleton_smc91x_info,
+	},
 };
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 273f90ac2cb..22209b6f140 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -42,7 +42,8 @@
 
 #if defined(CONFIG_ARCH_LUBBOCK) ||\
     defined(CONFIG_MACH_MAINSTONE) ||\
-    defined(CONFIG_MACH_ZYLONITE)
+    defined(CONFIG_MACH_ZYLONITE) ||\
+    defined(CONFIG_MACH_LITTLETON)
 
 #include <asm/mach-types.h>
 
-- 
cgit v1.2.3


From 9d9f6d27333b97d590b5409017d105205f79a28e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 13 Jul 2008 12:04:48 +0100
Subject: [ARM] Update mach-types

This update is required for Tavor and SAAR

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 0be5630ff56..8b8f564c3aa 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jul 7 16:25:39 2008
+# Last update: Sun Jul 13 12:04:05 2008
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1812,3 +1812,11 @@ jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
 gprisc4			MACH_GPRISC4		GPRISC4			1823
 stamp9260		MACH_STAMP9260		STAMP9260		1824
+smdk6430		MACH_SMDK6430		SMDK6430		1825
+smdkc100		MACH_SMDKC100		SMDKC100		1826
+tavorevb		MACH_TAVOREVB		TAVOREVB		1827
+saar			MACH_SAAR		SAAR			1828
+deister_eyecam		MACH_DEISTER_EYECAM	DEISTER_EYECAM		1829
+at91sam9m10ek		MACH_AT91SAM9M10EK	AT91SAM9M10EK		1830
+linkstation_produo	MACH_LINKSTATION_PRODUO	LINKSTATION_PRODUO	1831
+hit_b0			MACH_HIT_B0		HIT_B0			1832
-- 
cgit v1.2.3


From 5d31e43589589e63f5b96abc62372d2ef331c14a Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 11 Jul 2008 12:45:39 +0800
Subject: [ARM] pxa: add base support for PXA930 (aka Tavor-P)

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig             |   3 +
 arch/arm/mach-pxa/Makefile            |   1 +
 arch/arm/mach-pxa/pxa930.c            | 190 +++++++++++++
 include/asm-arm/arch-pxa/hardware.h   |  16 ++
 include/asm-arm/arch-pxa/mfp-pxa930.h | 491 ++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-pxa/mfp.h        |   8 +
 6 files changed, 709 insertions(+)
 create mode 100644 arch/arm/mach-pxa/pxa930.c
 create mode 100644 include/asm-arm/arch-pxa/mfp-pxa930.h

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e28521b9eb..d64b40c8e42 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,6 +16,9 @@ config CPU_PXA310
 config CPU_PXA320
 	bool "PXA320 (codename Monahans-P)"
 
+config CPU_PXA930
+	bool "PXA930 (codename Tavor-P)"
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 5220a5c3fe9..d04014e67c0 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
+obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 00000000000..9503897d049
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/mfp-pxa930.h>
+
+static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+	MFP_ADDR(GPIO0, 0x02e0),
+	MFP_ADDR(GPIO1, 0x02dc),
+	MFP_ADDR(GPIO2, 0x02e8),
+	MFP_ADDR(GPIO3, 0x02d8),
+	MFP_ADDR(GPIO4, 0x02e4),
+	MFP_ADDR(GPIO5, 0x02ec),
+	MFP_ADDR(GPIO6, 0x02f8),
+	MFP_ADDR(GPIO7, 0x02fc),
+	MFP_ADDR(GPIO8, 0x0300),
+	MFP_ADDR(GPIO9, 0x02d4),
+	MFP_ADDR(GPIO10, 0x02f4),
+	MFP_ADDR(GPIO11, 0x02f0),
+	MFP_ADDR(GPIO12, 0x0304),
+	MFP_ADDR(GPIO13, 0x0310),
+	MFP_ADDR(GPIO14, 0x0308),
+	MFP_ADDR(GPIO15, 0x030c),
+	MFP_ADDR(GPIO16, 0x04e8),
+	MFP_ADDR(GPIO17, 0x04f4),
+	MFP_ADDR(GPIO18, 0x04f8),
+	MFP_ADDR(GPIO19, 0x04fc),
+	MFP_ADDR(GPIO20, 0x0518),
+	MFP_ADDR(GPIO21, 0x051c),
+	MFP_ADDR(GPIO22, 0x04ec),
+	MFP_ADDR(GPIO23, 0x0500),
+	MFP_ADDR(GPIO24, 0x04f0),
+	MFP_ADDR(GPIO25, 0x0504),
+	MFP_ADDR(GPIO26, 0x0510),
+	MFP_ADDR(GPIO27, 0x0514),
+	MFP_ADDR(GPIO28, 0x0520),
+	MFP_ADDR(GPIO29, 0x0600),
+	MFP_ADDR(GPIO30, 0x0618),
+	MFP_ADDR(GPIO31, 0x0610),
+	MFP_ADDR(GPIO32, 0x060c),
+	MFP_ADDR(GPIO33, 0x061c),
+	MFP_ADDR(GPIO34, 0x0620),
+	MFP_ADDR(GPIO35, 0x0628),
+	MFP_ADDR(GPIO36, 0x062c),
+	MFP_ADDR(GPIO37, 0x0630),
+	MFP_ADDR(GPIO38, 0x0634),
+	MFP_ADDR(GPIO39, 0x0638),
+	MFP_ADDR(GPIO40, 0x063c),
+	MFP_ADDR(GPIO41, 0x0614),
+	MFP_ADDR(GPIO42, 0x0624),
+	MFP_ADDR(GPIO43, 0x0608),
+	MFP_ADDR(GPIO44, 0x0604),
+	MFP_ADDR(GPIO45, 0x050c),
+	MFP_ADDR(GPIO46, 0x0508),
+	MFP_ADDR(GPIO47, 0x02bc),
+	MFP_ADDR(GPIO48, 0x02b4),
+	MFP_ADDR(GPIO49, 0x02b8),
+	MFP_ADDR(GPIO50, 0x02c8),
+	MFP_ADDR(GPIO51, 0x02c0),
+	MFP_ADDR(GPIO52, 0x02c4),
+	MFP_ADDR(GPIO53, 0x02d0),
+	MFP_ADDR(GPIO54, 0x02cc),
+	MFP_ADDR(GPIO55, 0x029c),
+	MFP_ADDR(GPIO56, 0x02a0),
+	MFP_ADDR(GPIO57, 0x0294),
+	MFP_ADDR(GPIO58, 0x0298),
+	MFP_ADDR(GPIO59, 0x02a4),
+	MFP_ADDR(GPIO60, 0x02a8),
+	MFP_ADDR(GPIO61, 0x02b0),
+	MFP_ADDR(GPIO62, 0x02ac),
+	MFP_ADDR(GPIO63, 0x0640),
+	MFP_ADDR(GPIO64, 0x065c),
+	MFP_ADDR(GPIO65, 0x0648),
+	MFP_ADDR(GPIO66, 0x0644),
+	MFP_ADDR(GPIO67, 0x0674),
+	MFP_ADDR(GPIO68, 0x0658),
+	MFP_ADDR(GPIO69, 0x0654),
+	MFP_ADDR(GPIO70, 0x0660),
+	MFP_ADDR(GPIO71, 0x0668),
+	MFP_ADDR(GPIO72, 0x0664),
+	MFP_ADDR(GPIO73, 0x0650),
+	MFP_ADDR(GPIO74, 0x066c),
+	MFP_ADDR(GPIO75, 0x064c),
+	MFP_ADDR(GPIO76, 0x0670),
+	MFP_ADDR(GPIO77, 0x0678),
+	MFP_ADDR(GPIO78, 0x067c),
+	MFP_ADDR(GPIO79, 0x0694),
+	MFP_ADDR(GPIO80, 0x069c),
+	MFP_ADDR(GPIO81, 0x06a0),
+	MFP_ADDR(GPIO82, 0x06a4),
+	MFP_ADDR(GPIO83, 0x0698),
+	MFP_ADDR(GPIO84, 0x06bc),
+	MFP_ADDR(GPIO85, 0x06b4),
+	MFP_ADDR(GPIO86, 0x06b0),
+	MFP_ADDR(GPIO87, 0x06c0),
+	MFP_ADDR(GPIO88, 0x06c4),
+	MFP_ADDR(GPIO89, 0x06ac),
+	MFP_ADDR(GPIO90, 0x0680),
+	MFP_ADDR(GPIO91, 0x0684),
+	MFP_ADDR(GPIO92, 0x0688),
+	MFP_ADDR(GPIO93, 0x0690),
+	MFP_ADDR(GPIO94, 0x068c),
+	MFP_ADDR(GPIO95, 0x06a8),
+	MFP_ADDR(GPIO96, 0x06b8),
+	MFP_ADDR(GPIO97, 0x0410),
+	MFP_ADDR(GPIO98, 0x0418),
+	MFP_ADDR(GPIO99, 0x041c),
+	MFP_ADDR(GPIO100, 0x0414),
+	MFP_ADDR(GPIO101, 0x0408),
+	MFP_ADDR(GPIO102, 0x0324),
+	MFP_ADDR(GPIO103, 0x040c),
+	MFP_ADDR(GPIO104, 0x0400),
+	MFP_ADDR(GPIO105, 0x0328),
+	MFP_ADDR(GPIO106, 0x0404),
+
+	MFP_ADDR(nXCVREN, 0x0204),
+	MFP_ADDR(DF_CLE_nOE, 0x020c),
+	MFP_ADDR(DF_nADV1_ALE, 0x0218),
+	MFP_ADDR(DF_SCLK_E, 0x0214),
+	MFP_ADDR(DF_SCLK_S, 0x0210),
+	MFP_ADDR(nBE0, 0x021c),
+	MFP_ADDR(nBE1, 0x0220),
+	MFP_ADDR(DF_nADV2_ALE, 0x0224),
+	MFP_ADDR(DF_INT_RnB, 0x0228),
+	MFP_ADDR(DF_nCS0, 0x022c),
+	MFP_ADDR(DF_nCS1, 0x0230),
+	MFP_ADDR(nLUA, 0x0254),
+	MFP_ADDR(nLLA, 0x0258),
+	MFP_ADDR(DF_nWE, 0x0234),
+	MFP_ADDR(DF_nRE_nOE, 0x0238),
+	MFP_ADDR(DF_ADDR0, 0x024c),
+	MFP_ADDR(DF_ADDR1, 0x0250),
+	MFP_ADDR(DF_ADDR2, 0x025c),
+	MFP_ADDR(DF_ADDR3, 0x0260),
+	MFP_ADDR(DF_IO0, 0x023c),
+	MFP_ADDR(DF_IO1, 0x0240),
+	MFP_ADDR(DF_IO2, 0x0244),
+	MFP_ADDR(DF_IO3, 0x0248),
+	MFP_ADDR(DF_IO4, 0x0264),
+	MFP_ADDR(DF_IO5, 0x0268),
+	MFP_ADDR(DF_IO6, 0x026c),
+	MFP_ADDR(DF_IO7, 0x0270),
+	MFP_ADDR(DF_IO8, 0x0274),
+	MFP_ADDR(DF_IO9, 0x0278),
+	MFP_ADDR(DF_IO10, 0x027c),
+	MFP_ADDR(DF_IO11, 0x0280),
+	MFP_ADDR(DF_IO12, 0x0284),
+	MFP_ADDR(DF_IO13, 0x0288),
+	MFP_ADDR(DF_IO14, 0x028c),
+	MFP_ADDR(DF_IO15, 0x0290),
+
+	MFP_ADDR(GSIM_UIO, 0x0314),
+	MFP_ADDR(GSIM_UCLK, 0x0318),
+	MFP_ADDR(GSIM_UDET, 0x031c),
+	MFP_ADDR(GSIM_nURST, 0x0320),
+
+	MFP_ADDR(PMIC_INT, 0x06c8),
+
+	MFP_ADDR(RDY, 0x0200),
+
+	MFP_ADDR_END,
+};
+
+static int __init pxa930_init(void)
+{
+	if (cpu_is_pxa930()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+	}
+
+	return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index 09868de841a..979a45695d7 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -126,6 +126,16 @@
 #define __cpu_is_pxa320(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_PXA930
+#define __cpu_is_pxa930(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x683;		\
+	 })
+#else
+#define __cpu_is_pxa930(id)	(0)
+#endif
+
 #define cpu_is_pxa21x()					\
 	({						\
 		__cpu_is_pxa21x(read_cpuid_id());	\
@@ -161,6 +171,12 @@
 		__cpu_is_pxa320(read_cpuid_id());	\
 	 })
 
+#define cpu_is_pxa930()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa930(id);			\
+	 })
+
 /*
  * CPUID Core Generation Bit
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
diff --git a/include/asm-arm/arch-pxa/mfp-pxa930.h b/include/asm-arm/arch-pxa/mfp-pxa930.h
new file mode 100644
index 00000000000..c4e945ab192
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mfp-pxa930.h
@@ -0,0 +1,491 @@
+/*
+ * linux/include/asm-arm/arch-pxa/mfp-pxa930.h
+ *
+ * PXA930 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA9xx_H
+#define __ASM_ARCH_MFP_PXA9xx_H
+
+#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
+#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
+#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
+#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
+
+#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
+#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
+#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
+#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
+#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
+#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
+#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
+#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
+#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
+#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
+#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
+#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
+#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
+#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
+#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
+#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
+#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
+#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
+#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
+#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
+#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
+#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
+#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
+#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
+#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
+
+#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
+#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
+#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
+#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
+#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
+#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
+#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
+#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
+#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
+#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
+
+/* Chip Select */
+#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
+#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
+
+/* AC97 */
+#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
+#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
+#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
+#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
+#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
+#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
+
+/* I2C */
+#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
+#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
+
+#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
+#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
+
+#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
+#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+
+#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
+#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
+
+#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
+#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
+
+#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+
+#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
+#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
+
+/* QCI */
+#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
+#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
+#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
+#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
+#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
+#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
+#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
+#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
+#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
+#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
+#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
+#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
+#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
+#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
+
+/* KEYPAD */
+#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
+#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
+#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
+#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
+#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
+#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
+
+#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
+#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
+#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
+#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
+
+#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+
+#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
+#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
+#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
+#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
+#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
+#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
+#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
+#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
+#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
+
+#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
+#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
+#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
+#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
+#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
+#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
+#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
+#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
+#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
+#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
+#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
+#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
+#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
+#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
+#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
+#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
+#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
+#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
+#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
+#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
+#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
+#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
+#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
+#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
+#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
+#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
+#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
+#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
+#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
+#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
+#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
+#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
+
+/* Mini-LCD */
+#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
+#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
+#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
+#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
+#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
+#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
+#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
+#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
+#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
+#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
+#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
+#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
+#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
+#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
+#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
+#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
+#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
+#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
+#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
+#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
+#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
+
+/* MMC1 */
+#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
+#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
+#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
+#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
+#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
+#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
+#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
+#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
+#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
+#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
+#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
+#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
+
+#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
+#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
+#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
+#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
+#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
+
+/* MMC2 */
+#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
+#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
+#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
+#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
+#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
+#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
+
+#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
+#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
+#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
+#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
+#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
+#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
+
+#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
+#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
+#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
+#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
+#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
+#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
+
+/* BSSP1 */
+#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
+#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
+#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
+#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
+#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
+#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
+
+/* BSSP2 */
+#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
+#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
+#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
+#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
+#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
+
+/* BSSP3 */
+#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
+#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
+#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
+#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
+#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
+
+/* BSSP4 */
+#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
+#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
+#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
+#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
+
+#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
+#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
+#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
+#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
+
+/* GSSP1 */
+#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
+#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
+#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
+#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
+#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
+
+#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
+#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
+#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
+#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
+
+/* GSSP2 */
+#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
+#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
+#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
+#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
+
+#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
+#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
+#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
+#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
+
+#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
+#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
+#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
+#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
+#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
+#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
+
+#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
+#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
+#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
+
+/* UART1 - FFUART */
+#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
+#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
+
+#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
+#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
+#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
+#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
+#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
+#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
+#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
+#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
+
+/* UART2 - BTUART */
+#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
+#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
+#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
+#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
+
+/* UART3 - STUART */
+#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
+#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
+#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
+#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
+
+#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
+#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
+#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
+#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
+
+/* DFI */
+#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
+#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
+#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
+#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
+#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
+#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
+#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
+#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
+#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
+#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
+#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
+#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
+#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
+#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
+#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
+#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
+#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
+#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
+#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
+#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
+#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
+#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
+
+/* DFI - NAND */
+#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
+#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
+#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
+#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
+#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
+#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
+#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
+#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
+#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
+#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
+#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
+#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
+#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
+#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
+#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
+#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
+#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
+#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
+#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
+#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
+#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
+#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
+#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
+#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
+
+/* PWM */
+#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
+#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
+#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
+#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
+#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
+#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+
+/* CIR */
+#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
+#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
+
+/* USB P2 */
+#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
+#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
+#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
+#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
+#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
+#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
+
+#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
+#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
+#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
+#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
+#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
+#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
+#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
+
+#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
+#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
+#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
+#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
+#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
+#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
+#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
+#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
+
+/* ULPI */
+#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
+#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
+#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
+#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
+#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
+#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
+#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
+#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
+#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
+#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
+#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
+#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
+
+#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
+#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
+#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
+#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
+#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
+
+#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
+#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
+#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
+#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
+
+#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
+#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
+#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
+#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
+#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
+#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+
+/* 1 wire */
+#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
+
+#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h
index 02f6157396d..e7d58798da6 100644
--- a/include/asm-arm/arch-pxa/mfp.h
+++ b/include/asm-arm/arch-pxa/mfp.h
@@ -210,6 +210,14 @@ enum {
 	MFP_PIN_DF_IO14,
 	MFP_PIN_DF_IO15,
 
+	/* additional pins on PXA930 */
+	MFP_PIN_GSIM_UIO,
+	MFP_PIN_GSIM_UCLK,
+	MFP_PIN_GSIM_UDET,
+	MFP_PIN_GSIM_nURST,
+	MFP_PIN_PMIC_INT,
+	MFP_PIN_RDY,
+
 	MFP_PIN_MAX,
 };
 
-- 
cgit v1.2.3


From bae033111cda415365ad40e9befb4b332d501c52 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 11 Jul 2008 12:59:38 +0800
Subject: [ARM] pxa: add base support for PXA930 Evaluation Board (aka
 TavorEVB)

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig    |  5 +++
 arch/arm/mach-pxa/Makefile   |  1 +
 arch/arm/mach-pxa/tavorevb.c | 84 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 90 insertions(+)
 create mode 100644 arch/arm/mach-pxa/tavorevb.c

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index d64b40c8e42..7e5578509c0 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -196,6 +196,11 @@ config MACH_LITTLETON
 	select PXA3xx
 	select PXA_SSP
 
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
+	select PXA930
+
 config MACH_ARMCORE
 	bool "CompuLab CM-X270 modules"
 	select PXA27x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d04014e67c0..24b20bc9dd6 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -50,6 +50,7 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 00000000000..ac283507e42
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (TAVOREVB_ETH_PHYS + 0x300),
+		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &tavorevb_smc91x_info,
+	},
+};
+
+static void __init tavorevb_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = tavorevb_init,
+MACHINE_END
-- 
cgit v1.2.3


From faf64ed4968e354624f330c6da6c1ce8b05a0713 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 11 Jul 2008 14:02:20 +0800
Subject: [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR)

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig  |  5 +++
 arch/arm/mach-pxa/Makefile |  1 +
 arch/arm/mach-pxa/saar.c   | 84 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 90 insertions(+)
 create mode 100644 arch/arm/mach-pxa/saar.c

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 7e5578509c0..e8ee7ec9ff6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -201,6 +201,11 @@ config MACH_TAVOREVB
 	select PXA3xx
 	select PXA930
 
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
+	select PXA930
+
 config MACH_ARMCORE
 	bool "CompuLab CM-X270 modules"
 	select PXA27x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 24b20bc9dd6..99ecbe7f850 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -51,6 +51,7 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
 endif
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 00000000000..d02bc6f8bb9
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/saar.c
+ *
+ *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO97_GPIO,
+};
+
+#define SAAR_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (SAAR_ETH_PHYS + 0x300),
+		.end	= (SAAR_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &saar_smc91x_info,
+	},
+};
+
+static void __init saar_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = saar_init,
+MACHINE_END
-- 
cgit v1.2.3


From 1f2d18690f4390ac4cf75648a5bc18fc07b3aef6 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Mon, 14 Jul 2008 16:31:22 +0800
Subject: Blackfin arch: Fix Bug - GPIO interrupts not disabled; edge sensitive
 interrupt hang system.

 - Implement irq_chip.enable and irq_chip.disable

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-common/ints-priority.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index f5fd768022e..64d746114e4 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -459,6 +459,8 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
 	.unmask = bfin_gpio_unmask_irq,
+	.disable = bfin_gpio_mask_irq,
+	.enable = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
 	.shutdown = bfin_gpio_irq_shutdown,
@@ -846,6 +848,8 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
 	.unmask = bfin_gpio_unmask_irq,
+	.disable = bfin_gpio_mask_irq,
+	.enable = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
 	.shutdown = bfin_gpio_irq_shutdown,
-- 
cgit v1.2.3


From 260d5d3517c67c5b68b4e28c5d3e1e3b73976a90 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Mon, 14 Jul 2008 16:34:05 +0800
Subject: Blackfin arch: Fix bug - do not overflow the buffer given to us which
 tends to happen when CONFIG_L1_MAX_PIECE is increased past its default

Singed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mm/blackfin_sram.c | 38 ++++++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 12 deletions(-)

diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index 3246f91c7ba..8f6fdc24533 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -549,13 +549,16 @@ EXPORT_SYMBOL(sram_alloc_with_lsl);
 /* Once we get a real allocator, we'll throw all of this away.
  * Until then, we need some sort of visibility into the L1 alloc.
  */
-static void _l1sram_proc_read(char *buf, int *len, const char *desc,
+/* Need to keep line of output the same.  Currently, that is 44 bytes
+ * (including newline).
+ */
+static int _l1sram_proc_read(char *buf, int *len, int count, const char *desc,
 		struct l1_sram_piece *pfree, const int array_size)
 {
 	int i;
 
-	*len += sprintf(&buf[*len], "--- L1 %-14s Size  PID State\n", desc);
-	for (i = 0; i < array_size; ++i) {
+	*len += sprintf(&buf[*len], "--- L1 %-14s Size   PID State     \n", desc);
+	for (i = 0; i < array_size && *len < count; ++i) {
 		const char *alloc_type;
 		switch (pfree[i].flag) {
 		case SRAM_SLT_NULL:      alloc_type = "NULL"; break;
@@ -563,31 +566,42 @@ static void _l1sram_proc_read(char *buf, int *len, const char *desc,
 		case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break;
 		default:                 alloc_type = "????"; break;
 		}
-		*len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n",
+		/* if we've got a lot of space to cover, omit things */
+		if ((PAGE_SIZE - 1024) < (CONFIG_L1_MAX_PIECE + 1) * 4 * 44 &&
+		    pfree[i].size == 0)
+			continue;
+		*len += sprintf(&buf[*len], "%p-%p %8i %5i %-10s\n",
 			pfree[i].paddr, pfree[i].paddr + pfree[i].size,
 			pfree[i].size, pfree[i].pid, alloc_type);
 	}
+	return (i != array_size);
 }
 static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
 		int *eof, void *data)
 {
 	int len = 0;
 
-	_l1sram_proc_read(buf, &len, "Scratchpad",
-			l1_ssram, ARRAY_SIZE(l1_ssram));
+	if (_l1sram_proc_read(buf, &len, count, "Scratchpad",
+			l1_ssram, ARRAY_SIZE(l1_ssram)))
+		goto not_done;
 #if L1_DATA_A_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Data A",
-			l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	if (_l1sram_proc_read(buf, &len, count, "Data A",
+			l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)))
+		goto not_done;
 #endif
 #if L1_DATA_B_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Data B",
-			l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	if (_l1sram_proc_read(buf, &len, count, "Data B",
+			l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)))
+		goto not_done;
 #endif
 #if L1_CODE_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Instruction",
-			l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	if (_l1sram_proc_read(buf, &len, count, "Instruction",
+			l1_inst_sram, ARRAY_SIZE(l1_inst_sram)))
+		goto not_done;
 #endif
 
+	*eof = 1;
+ not_done:
 	return len;
 }
 
-- 
cgit v1.2.3


From 68e2fc78e5055740126df8eab0d31005495756c9 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Mon, 14 Jul 2008 16:51:57 +0800
Subject: Blackfin arch: Fix bug - Kernel does not boot if re-program clocks

Don't write conflicting data to EBIU_SDBCTL after the SDRAM is
configured. This can cause data corruption, since we might change SDRAM
row and column addressing modes.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/Kconfig                      | 14 --------------
 arch/blackfin/mach-bf527/head.S            | 12 +++---------
 arch/blackfin/mach-bf533/head.S            | 12 +++---------
 arch/blackfin/mach-bf537/head.S            | 12 +++---------
 arch/blackfin/mach-bf548/head.S            |  6 +++---
 arch/blackfin/mach-bf561/head.S            |  6 ------
 include/asm-blackfin/mach-bf527/mem_init.h | 27 ---------------------------
 include/asm-blackfin/mach-bf533/mem_init.h | 27 ---------------------------
 include/asm-blackfin/mach-bf537/mem_init.h | 27 ---------------------------
 include/asm-blackfin/mach-bf561/mem_init.h | 27 ---------------------------
 10 files changed, 12 insertions(+), 158 deletions(-)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b87634e75f2..d0f7ff3dc08 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -315,20 +315,6 @@ config MEM_SIZE
 	depends on BFIN_KERNEL_CLOCK
 	default 64
 
-config MEM_ADD_WIDTH
-	int "Memory Address Width"
-	depends on BFIN_KERNEL_CLOCK
-	depends on (!BF54x)
-	range 8 11
-	default  9 if BFIN533_EZKIT
-	default  9 if BFIN561_EZKIT
-	default  9 if H8606_HVSISTEMAS
-	default 10 if BFIN527_EZKIT
-	default 10 if BFIN537_STAMP
-	default 11 if BFIN533_STAMP
-	default 10 if PNAV10
-	default 10 if BFIN532_IP0X
-
 config PLL_BYPASS
 	bool "Bypass PLL"
 	depends on BFIN_KERNEL_CLOCK
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S
index 57bdb3ba2fe..fe05cc1ef17 100644
--- a/arch/blackfin/mach-bf527/head.S
+++ b/arch/blackfin/mach-bf527/head.S
@@ -32,7 +32,7 @@
 #include <asm/blackfin.h>
 #include <asm/trace.h>
 
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -185,7 +185,7 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
 
@@ -318,7 +318,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -398,12 +398,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 1295deac00a..c671e8549b1 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -186,7 +186,7 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
 
@@ -319,7 +319,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 	p0.h = hi(SIC_IWR);
 	p0.l = lo(SIC_IWR);
@@ -390,12 +390,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 48cd58a410a..6b019eaee0b 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -32,7 +32,7 @@
 #include <asm/blackfin.h>
 #include <asm/trace.h>
 
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -217,7 +217,7 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
 
@@ -350,7 +350,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -430,12 +430,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index f7191141a3c..06b9178cfcf 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -130,7 +130,7 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
 	/* Code for initializing Async memory banks */
@@ -288,7 +288,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 5b8bd40851d..cf1a2dff01e 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -377,12 +377,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/include/asm-blackfin/mach-bf527/mem_init.h b/include/asm-blackfin/mach-bf527/mem_init.h
index 008ca66719e..cbe03f4a569 100644
--- a/include/asm-blackfin/mach-bf527/mem_init.h
+++ b/include/asm-blackfin/mach-bf527/mem_init.h
@@ -146,33 +146,6 @@
 #define SDRAM_CL    CL_3
 #endif
 
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EBSZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EBSZ_64
-#endif
-#if (CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EBSZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EBSZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EBCAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EBCAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EBCAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EBCAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EBE)
-
 /* Equation from section 17 (p17-46) of BF533 HRM */
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/include/asm-blackfin/mach-bf533/mem_init.h
index f8f31901fca..995c06b2b1e 100644
--- a/include/asm-blackfin/mach-bf533/mem_init.h
+++ b/include/asm-blackfin/mach-bf533/mem_init.h
@@ -133,33 +133,6 @@
 #define SDRAM_CL    CL_3
 #endif
 
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EBSZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EBSZ_64
-#endif
-#if (CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EBSZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EBSZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EBCAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EBCAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EBCAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EBCAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EBE)
-
 /* Equation from section 17 (p17-46) of BF533 HRM */
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref)  / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
diff --git a/include/asm-blackfin/mach-bf537/mem_init.h b/include/asm-blackfin/mach-bf537/mem_init.h
index 9ad979d416c..f67698f670c 100644
--- a/include/asm-blackfin/mach-bf537/mem_init.h
+++ b/include/asm-blackfin/mach-bf537/mem_init.h
@@ -139,33 +139,6 @@
 #define SDRAM_CL    CL_3
 #endif
 
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EBSZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EBSZ_64
-#endif
-#if (CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EBSZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EBSZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EBCAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EBCAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EBCAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EBCAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EBE)
-
 /* Equation from section 17 (p17-46) of BF533 HRM */
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
diff --git a/include/asm-blackfin/mach-bf561/mem_init.h b/include/asm-blackfin/mach-bf561/mem_init.h
index 439a5895b34..e163260bca1 100644
--- a/include/asm-blackfin/mach-bf561/mem_init.h
+++ b/include/asm-blackfin/mach-bf561/mem_init.h
@@ -131,33 +131,6 @@
 #define SDRAM_CL    CL_3
 #endif
 
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EB0_SZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EB0_SZ_64
-#endif
-#if ( CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EB0_SZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EB0_SZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EB0_CAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EB0_CAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EB0_CAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EB0_CAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EB0_E)
-
 /* Equation from section 17 (p17-46) of BF533 HRM */
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
-- 
cgit v1.2.3


From 96b86e94bcf7eadbd8c959c0474d2971b3695478 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Mon, 14 Jul 2008 16:39:43 +0800
Subject: Blackfin arch: use the symbolic IRQ define rather than the backend
 number

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 7e4b9d95674..6dbc76fb080 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -861,7 +861,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
+#define PATA_INT	IRQ_PF5
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 1,
-- 
cgit v1.2.3


From 99d95bbd48f43dafdcd0540eb0da26c5655d7f33 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Mon, 14 Jul 2008 17:04:14 +0800
Subject: Blackfin arch: Remove redundant kernel option

use kernel command line mem and max_mem bootargs to limit
availabe memory instead.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/Kconfig                      |  7 +------
 arch/blackfin/kernel/cplb-nompu/cplbinit.c |  6 +-----
 arch/blackfin/kernel/setup.c               | 14 +++++---------
 arch/blackfin/mach-common/arch_checks.c    |  6 ------
 4 files changed, 7 insertions(+), 26 deletions(-)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index d0f7ff3dc08..c602727d1a9 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -310,11 +310,6 @@ config BFIN_KERNEL_CLOCK
 	  are also not changed, and the Bootloader does 100% of the hardware
 	  configuration.
 
-config MEM_SIZE
-	int "SDRAM Memory Size in MBytes"
-	depends on BFIN_KERNEL_CLOCK
-	default 64
-
 config PLL_BYPASS
 	bool "Bypass PLL"
 	depends on BFIN_KERNEL_CLOCK
@@ -376,7 +371,7 @@ config SCLK_DIV
 
 config MAX_MEM_SIZE
 	int "Max SDRAM Memory Size in MBytes"
-	depends on !BFIN_KERNEL_CLOCK && !MPU
+	depends on !MPU
 	default 512
 	help
 	  This is the max memory size that the kernel will create CPLB
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 6be0c50122e..224e7cc30bc 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -26,11 +26,7 @@
 #include <asm/cplb.h>
 #include <asm/cplbinit.h>
 
-#ifdef CONFIG_MAX_MEM_SIZE
-# define CPLB_MEM CONFIG_MAX_MEM_SIZE
-#else
-# define CPLB_MEM CONFIG_MEM_SIZE
-#endif
+#define CPLB_MEM CONFIG_MAX_MEM_SIZE
 
 /*
 * Number of required data CPLB switchtable entries
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 8efea004aec..861a1db74df 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -664,11 +664,8 @@ static __init void setup_bootmem_allocator(void)
 })
 static inline int __init get_mem_size(void)
 {
-#ifdef CONFIG_MEM_SIZE
-	return CONFIG_MEM_SIZE;
-#else
-# if defined(EBIU_SDBCTL)
-#  if defined(BF561_FAMILY)
+#if defined(EBIU_SDBCTL)
+# if defined(BF561_FAMILY)
 	int ret = 0;
 	u32 sdbctl = bfin_read_EBIU_SDBCTL();
 	ret += EBSZ_TO_MEG(sdbctl >>  0);
@@ -676,10 +673,10 @@ static inline int __init get_mem_size(void)
 	ret += EBSZ_TO_MEG(sdbctl >> 16);
 	ret += EBSZ_TO_MEG(sdbctl >> 24);
 	return ret;
-#  else
+# else
 	return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
-#  endif
-# elif defined(EBIU_DDRCTL1)
+# endif
+#elif defined(EBIU_DDRCTL1)
 	u32 ddrctl = bfin_read_EBIU_DDRCTL1();
 	int ret = 0;
 	switch (ddrctl & 0xc0000) {
@@ -694,7 +691,6 @@ static inline int __init get_mem_size(void)
 		case DEVWD_16: break;
 	}
 	return ret;
-# endif
 #endif
 	BUG();
 }
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index caaab49e9cf..f9160d83b91 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -53,9 +53,3 @@
 # endif
 
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
-#ifdef CONFIG_MEM_SIZE
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM mem size must be multible of 4MB"
-#endif
-#endif
-- 
cgit v1.2.3


From ed987319ed6a3f5e14c87141e210deb057a6c507 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Sat, 26 Jul 2008 18:40:06 +0800
Subject: Blackfin arch: update board defconfigs

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/configs/BF527-EZKIT_defconfig | 187 ++++++++++++++-
 arch/blackfin/configs/BF533-EZKIT_defconfig | 279 +++++++----------------
 arch/blackfin/configs/BF533-STAMP_defconfig | 340 +++++++++++-----------------
 arch/blackfin/configs/BF537-STAMP_defconfig | 337 +++++++++++----------------
 arch/blackfin/configs/BF548-EZKIT_defconfig |  65 +++++-
 arch/blackfin/configs/BF561-EZKIT_defconfig | 273 +++++++---------------
 arch/blackfin/configs/CM-BF533_defconfig    |  14 +-
 arch/blackfin/configs/CM-BF537E_defconfig   |  21 +-
 arch/blackfin/configs/CM-BF537U_defconfig   |  18 +-
 arch/blackfin/configs/CM-BF548_defconfig    |  10 +-
 arch/blackfin/configs/CM-BF561_defconfig    |  14 +-
 arch/blackfin/configs/H8606_defconfig       |   2 +-
 arch/blackfin/configs/IP0X_defconfig        |   2 +-
 arch/blackfin/configs/PNAV-10_defconfig     |   4 +-
 arch/blackfin/configs/SRV1_defconfig        |   2 +-
 15 files changed, 706 insertions(+), 862 deletions(-)

diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 5e6fb9d8e50..66854a83c0d 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.24.7
-# Fri May 16 10:02:29 2008
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -290,7 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -430,7 +429,58 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -689,8 +739,11 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_VT is not set
+CONFIG_SIMPLE_GPIO=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -872,18 +925,136 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_BFIN_T350MCQB=y
+# CONFIG_FB_BFIN_7393 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_LTV350QV=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_CORGI is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_LOGO_BLACKFIN_CLUT224=y
+
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SPI devices
+#
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BLACKFIN_AD1836_TDM is not set
+# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
+# CONFIG_SND_BLACKFIN_AD1836_MULSUB is not set
+# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_I2S=m
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+CONFIG_SND_BF5XX_SOC_SSM2602=m
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SSM2602=m
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+CONFIG_SND_SOC_AD1980=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 8d817ba0194..6bc11db1269 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_BFIN533_EZKIT=y
 # CONFIG_BFIN533_STAMP is not set
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=27000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,13 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -250,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -293,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -321,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -367,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -393,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -428,6 +422,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -457,6 +452,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -465,14 +461,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -492,6 +485,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -548,20 +542,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -571,10 +553,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -582,32 +562,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -624,15 +601,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -647,7 +616,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -672,13 +640,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -706,28 +673,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -748,22 +698,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -780,72 +745,27 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -861,10 +781,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
 # CONFIG_RTC_DRV_TEST is not set
 
-#
-# I2C RTC drivers
-#
-
 #
 # SPI RTC drivers
 #
@@ -875,8 +791,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -885,22 +803,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -945,7 +850,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -971,10 +875,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -983,10 +889,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1006,17 +909,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1057,21 +955,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1079,6 +972,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1098,11 +992,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1113,6 +1003,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 20d598d17bd..d77d991a1f6 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC64M4A2FB_7E=y
 # CONFIG_BFIN533_EZKIT is not set
 CONFIG_BFIN533_STAMP=y
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=11059200
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,14 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=11
-CONFIG_ENET_FLASH_PIN=0
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -251,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -294,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -322,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -368,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -394,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -429,6 +422,9 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -458,6 +454,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -466,14 +463,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -493,6 +487,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -524,11 +519,7 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
+CONFIG_MTD_BFIN_ASYNC=m
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -555,20 +546,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -578,10 +557,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -589,32 +566,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -631,15 +605,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -654,7 +620,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -667,14 +632,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 
 #
 # Hardware I/O ports
@@ -687,15 +646,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -723,28 +680,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -764,6 +704,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -771,14 +712,15 @@ CONFIG_I2C_ALGOBIT=m
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -801,14 +743,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -816,12 +755,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -836,13 +775,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -852,6 +794,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -863,24 +819,20 @@ CONFIG_HWMON=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -895,7 +847,7 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -905,9 +857,14 @@ CONFIG_NTSC=y
 # CONFIG_PAL_YCBCR is not set
 CONFIG_ADV7393_1XMEM=y
 # CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -940,6 +897,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 
+#
+# SPI devices
+#
+
 #
 # ALSA Blackfin devices
 #
@@ -953,69 +914,43 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
 #
-# CONFIG_SND_SOC is not set
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
 
 #
-# Open Sound System
+# SoC Audio support for SuperH
 #
-# CONFIG_SOUND_PRIME is not set
+CONFIG_SND_SOC_AD1980=m
 
 #
-# HID Devices
+# Open Sound System
 #
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1035,6 +970,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1042,6 +978,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1053,8 +990,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1063,22 +1002,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1123,7 +1049,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1149,10 +1074,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1161,10 +1088,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1184,17 +1108,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1235,21 +1154,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1257,6 +1171,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1276,11 +1191,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1291,6 +1202,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index b5189c8ba26..5fd7c4b143d 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,7 +132,6 @@ CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC32M8A2_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
@@ -197,12 +187,14 @@ CONFIG_IRQ_PROG_INTA=12
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -216,13 +208,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -258,12 +254,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -301,17 +299,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -329,7 +323,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -375,6 +371,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -401,10 +398,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -436,6 +429,10 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR1=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -465,6 +462,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -473,14 +471,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -500,6 +495,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -572,20 +568,8 @@ CONFIG_MTD_NAND_IDS=m
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -595,10 +579,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -606,22 +588,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -635,21 +613,24 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +647,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +662,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -702,14 +674,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 
 #
 # Hardware I/O ports
@@ -722,15 +688,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -766,28 +730,11 @@ CONFIG_CAN4LINUX=y
 # CONFIG_CAN_MCF5282 is not set
 # CONFIG_CAN_UNCTWINCAN is not set
 CONFIG_CAN_BLACKFIN=m
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -809,6 +756,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -816,14 +764,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_AD5252=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -846,14 +795,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -861,12 +807,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -881,13 +827,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -897,6 +846,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -913,21 +876,15 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -942,7 +899,8 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_HITACHI_TX09 is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -956,10 +914,18 @@ CONFIG_FB_BF537_LQ035=m
 CONFIG_LQ035_SLAVE_ADDR=0x58
 # CONFIG_FB_BFIN_LANDSCAPE is not set
 # CONFIG_FB_BFIN_BGR is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_HITACHI_TX09 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CORGI=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -992,6 +958,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 
+#
+# SPI devices
+#
+
 #
 # ALSA Blackfin devices
 #
@@ -1005,6 +975,10 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
@@ -1016,9 +990,14 @@ CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=m
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_BF5xx=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
 CONFIG_SND_SOC_AD1980=m
 
 #
@@ -1026,59 +1005,18 @@ CONFIG_SND_SOC_AD1980=m
 #
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_NO_DUMMY_DELAY is not set
+# CONFIG_DUMMY_DELAY_BANK0 is not set
+# CONFIG_DUMMY_DELAY_BANK1 is not set
+# CONFIG_DUMMY_DELAY_BANK2 is not set
+# CONFIG_DUMMY_DELAY_BANK3 is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1098,6 +1036,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1105,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1116,8 +1056,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1126,22 +1068,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1186,7 +1115,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1212,10 +1140,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1224,10 +1154,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1247,17 +1174,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1298,21 +1220,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1320,6 +1237,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1339,11 +1257,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1354,6 +1268,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 1ff2ff4b49a..390669e8668 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -365,7 +365,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -468,7 +468,60 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+# CONFIG_BFIN_SIR0 is not set
+# CONFIG_BFIN_SIR2 is not set
+CONFIG_BFIN_SIR3=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -575,6 +628,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BF5XX=y
 CONFIG_MTD_NAND_BF5XX_HWECC=y
+# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
@@ -766,7 +820,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
@@ -1071,6 +1125,7 @@ CONFIG_SND_BF5XX_SOC_AC97=y
 CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SPORT_NUM=0
 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
 CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
@@ -1133,7 +1188,7 @@ CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
+CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_LOGLEVEL=0
 
@@ -1312,7 +1367,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index b4a20c89081..976a4d7ba17 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -140,7 +131,6 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_5 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BFIN_DUAL_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_SPORT0_ERROR=7
@@ -233,12 +223,14 @@ CONFIG_IRQ_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=30000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -252,13 +244,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -294,12 +290,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -341,17 +339,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -367,8 +361,14 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
 #
 # Networking
 #
@@ -405,6 +405,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -431,10 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -466,6 +463,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -495,6 +493,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -503,14 +502,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -530,6 +526,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -590,20 +587,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -613,10 +598,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -624,32 +607,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +646,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +661,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -714,13 +685,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -748,27 +718,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -789,22 +743,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -821,91 +790,33 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -950,7 +861,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -976,10 +886,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -988,10 +900,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1011,17 +920,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1062,21 +966,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1084,6 +983,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1104,11 +1004,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1119,6 +1015,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 560890fe0d3..09deea44480 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -291,7 +292,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -617,8 +618,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -778,7 +778,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -866,11 +866,11 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 9f66d2de100..219fc345a5f 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -299,7 +300,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -351,7 +352,10 @@ CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -645,8 +649,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +809,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +897,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 2694d06c5bd..9873d586fc7 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -298,8 +299,8 @@ CONFIG_C_AMBEN_ALL=y
 #
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0xFFC3
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_2=0xFFC2
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -628,8 +629,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +806,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +894,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 90207251c53..0e3605fdb7b 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -363,7 +363,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -744,8 +744,8 @@ CONFIG_BFIN_OTP=y
 #
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
-CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
 # CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_BFIN_UART1_CTSRTS is not set
@@ -1149,7 +1149,7 @@ CONFIG_RTC_DRV_BFIN=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1332,7 +1332,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index daf00906c1e..59c7cdbee90 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -35,7 +35,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 CONFIG_FAIR_GROUP_SCHED=y
@@ -341,7 +342,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -631,8 +632,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -756,7 +756,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -830,12 +830,12 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 679c7483ea7..ba0bee90b7e 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -967,7 +967,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 4384a670a8b..285d2241df2 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -1066,7 +1066,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 87622ad9df4..bffca7de65d 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -294,7 +294,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x33B0
 CONFIG_BANK_2=0x33B0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -1080,7 +1080,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 951ea041257..b1309f878fc 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -1067,7 +1067,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
-- 
cgit v1.2.3


From c71b47835188d0c2a1e1f9590564f1b71c651710 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Mon, 14 Jul 2008 17:10:50 +0800
Subject: Blackfin arch: set CROSS_COMPILE in our arch Makefile so it gets used
 by default

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/Makefile | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 3cbe16caad4..9564731ad3a 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -6,8 +6,9 @@
 # for more details.
 #
 
-
-CROSS_COMPILE    ?= bfin-uclinux-
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE    := bfin-uclinux-
+endif
 LDFLAGS_vmlinux  := -X
 OBJCOPYFLAGS     := -O binary -R .note -R .comment -S
 GZFLAGS          := -9
-- 
cgit v1.2.3


From 792a61021c6043f6c2b24b1cdd42be5753b3e54c Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 12 Jul 2008 14:49:19 +0200
Subject: firewire: fix race of bus reset with request transmission

Reported by Jay Fenlason:  A bus reset tasklet may call
fw_flush_transactions and touch transactions (call their callback which
will free them) while the context which submitted the transaction is
still inserting it into the transmission queue.

A simple solution to this problem is to _not_ "flush" the transactions
because of a bus reset (complete the transcations as 'cancelled').  They
will now simply time out (completed as 'cancelled' by the split-timeout
timer).

Jay Fenlason thought of this fix too but I was quicker to type it out.
:-)

Background:
Contexts which access an instance of struct fw_transaction are:
 1. the submitter, until it inserted the packet which is embedded in the
    transaction into the AT req DMA,
 2. the AsReqTrContext tasklet when the request packet was acked by the
    responder node or transmission to the responder failed,
 3. the AsRspRcvContext tasklet when it found a request which matched
    an incoming response,
 4. the card->flush_timer when it picks up timed-out transactions to
    cancel them,
 5. the bus reset tasklet when it cancels transactions (this access is
    eliminated by this patch),
 6. a process which shuts down an fw_card (unregisters it from fw-core
    when the controller is unbound from fw-ohci) --- although in this
    case there shouldn't really be any transactions anymore because we
    wait until all card users finished their business with the card.

All of these contexts run concurrently (except for the 6th, presumably).
The 1st is safe against the 2nd and 3rd because of the way how a request
packet is carefully submitted to the hardware.  A race between 2nd and
3rd has been fixed a while ago (bug 9617).  The 4th is almost safe
against 1st, 2nd, 3rd;  there are issues with it if huge scheduling
latencies occur, to be fixed separately.  The 5th looks safe against
2nd, 3rd, and 4th but is unsafe against 1st.  Maybe this could be fixed
with an explicit state variable in struct fw_transaction.  But this
would require fw_transaction to be rewritten as only dynamically
allocatable object with reference counting --- not a good solution if we
also can simply kill this 5th accessing context (replace it by the 4th).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/fw-topology.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index 213b0ff8f3d..c1b81077c4a 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -510,8 +510,6 @@ fw_core_handle_bus_reset(struct fw_card *card,
 	struct fw_node *local_node;
 	unsigned long flags;
 
-	fw_flush_transactions(card);
-
 	spin_lock_irqsave(&card->lock, flags);
 
 	/*
-- 
cgit v1.2.3


From e9aeb46c93a8b1b703d00586c05d9a71aa7e0f0c Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 12 Jul 2008 14:50:06 +0200
Subject: firewire: fully initialize fw_transaction before marking it pending

In theory, card->flush_timer could already access a transaction between
fw_send_request()'s spin_unlock_irqrestore and the rest of what happens
in fw_send_request().  This would happen if the process which sends the
request is preempted and put to sleep right after spin_unlock_irqrestore
for longer than 100ms.

Therefore we fill in everything in struct fw_transaction at which the
flush_timer might look at before we lift the lock.

To do:  Ensure that the timer does not pick up the transaction before
the time of the AT request event plus split transaction timeout.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/fw-transaction.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index 40db8075227..7addfb3b070 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -279,11 +279,6 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
 	card->current_tlabel = (card->current_tlabel + 1) & 0x1f;
 	card->tlabel_mask |= (1 << tlabel);
 
-	list_add_tail(&t->link, &card->transaction_list);
-
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	/* Initialize rest of transaction, fill out packet and send it. */
 	t->node_id = node_id;
 	t->tlabel = tlabel;
 	t->callback = callback;
@@ -294,6 +289,10 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
 			speed, offset, payload, length);
 	t->packet.callback = transmit_complete_callback;
 
+	list_add_tail(&t->link, &card->transaction_list);
+
+	spin_unlock_irqrestore(&card->lock, flags);
+
 	card->driver->send_request(card, &t->packet);
 }
 EXPORT_SYMBOL(fw_send_request);
-- 
cgit v1.2.3


From b9549bc6803d6a16fe6a85b316b742ef82bd3931 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 12 Jul 2008 14:50:42 +0200
Subject: firewire: small fw_fill_request cleanup

  - better name for a function argument
  - removal of a local variable which became unnecessary after
    "fully initialize fw_transaction before marking it pending"

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/fw-transaction.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index 7addfb3b070..861dd60de7d 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -151,7 +151,7 @@ transmit_complete_callback(struct fw_packet *packet,
 
 static void
 fw_fill_request(struct fw_packet *packet, int tcode, int tlabel,
-		int node_id, int source_id, int generation, int speed,
+		int destination_id, int source_id, int generation, int speed,
 		unsigned long long offset, void *payload, size_t length)
 {
 	int ext_tcode;
@@ -166,7 +166,7 @@ fw_fill_request(struct fw_packet *packet, int tcode, int tlabel,
 		HEADER_RETRY(RETRY_X) |
 		HEADER_TLABEL(tlabel) |
 		HEADER_TCODE(tcode) |
-		HEADER_DESTINATION(node_id);
+		HEADER_DESTINATION(destination_id);
 	packet->header[1] =
 		HEADER_OFFSET_HIGH(offset >> 32) | HEADER_SOURCE(source_id);
 	packet->header[2] =
@@ -252,7 +252,7 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
 		fw_transaction_callback_t callback, void *callback_data)
 {
 	unsigned long flags;
-	int tlabel, source;
+	int tlabel;
 
 	/*
 	 * Bump the flush timer up 100ms first of all so we
@@ -268,7 +268,6 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
 
 	spin_lock_irqsave(&card->lock, flags);
 
-	source = card->node_id;
 	tlabel = card->current_tlabel;
 	if (card->tlabel_mask & (1 << tlabel)) {
 		spin_unlock_irqrestore(&card->lock, flags);
@@ -284,9 +283,8 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
 	t->callback = callback;
 	t->callback_data = callback_data;
 
-	fw_fill_request(&t->packet, tcode, t->tlabel,
-			node_id, source, generation,
-			speed, offset, payload, length);
+	fw_fill_request(&t->packet, tcode, t->tlabel, node_id, card->node_id,
+			generation, speed, offset, payload, length);
 	t->packet.callback = transmit_complete_callback;
 
 	list_add_tail(&t->link, &card->transaction_list);
-- 
cgit v1.2.3


From 1e8afea124added6409d5209f90d9949f5a13b32 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 12 Jul 2008 14:51:18 +0200
Subject: firewire: warn on unfinished transactions during card removal

After card->done and card->work are completed, any remaining pending
request would be a bug.  We cannot safely complete a transaction at
that point anymore.

IOW card users must not drop their last fw_card reference (usually
indirect references through fw_device references) before their last
outbound transaction through that card was finished.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/fw-card.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index da873d795aa..bbd73a406e5 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -539,7 +539,7 @@ fw_core_remove_card(struct fw_card *card)
 	wait_for_completion(&card->done);
 
 	cancel_delayed_work_sync(&card->work);
-	fw_flush_transactions(card);
+	WARN_ON(!list_empty(&card->transaction_list));
 	del_timer_sync(&card->flush_timer);
 }
 EXPORT_SYMBOL(fw_core_remove_card);
-- 
cgit v1.2.3


From 1c0d20cd29aec11a3580cedf0bccec25052e8d4c Mon Sep 17 00:00:00 2001
From: Bryan Wu <cooloney@kernel.org>
Date: Tue, 15 Jul 2008 12:08:50 +0800
Subject: Blackfin arch: add TXDWA definition to enable new feature

Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 include/asm-blackfin/mach-bf527/anomaly.h  | 2 ++
 include/asm-blackfin/mach-bf527/defBF527.h | 1 +
 include/asm-blackfin/mach-bf537/defBF537.h | 1 +
 3 files changed, 4 insertions(+)

diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 4725268a5ad..b7b166f4f06 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -23,6 +23,8 @@
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
+/* New Feature: EMAC TX DMA Word Alignment */
+#define ANOMALY_05000285 (1)
 /* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
diff --git a/include/asm-blackfin/mach-bf527/defBF527.h b/include/asm-blackfin/mach-bf527/defBF527.h
index 82134f578f3..f1a70db70cb 100644
--- a/include/asm-blackfin/mach-bf527/defBF527.h
+++ b/include/asm-blackfin/mach-bf527/defBF527.h
@@ -302,6 +302,7 @@
 #define	PHYIE             0x00000001    /* PHY_INT Interrupt Enable                               */
 #define	RXDWA             0x00000002    /* Receive Frame DMA Word Alignment (Odd/Even*)           */
 #define	RXCKS             0x00000004    /* Enable RX Frame TCP/UDP Checksum Computation           */
+#define	TXDWA             0x00000010    /* Transmit Frame DMA Word Alignment (Odd/Even*)          */
 #define	MDCDIV            0x00003F00    /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]            */
 
 #define	SET_MDCDIV(x) (((x)&0x3F)<< 8)   /* Set MDC Clock Divisor                                 */
diff --git a/include/asm-blackfin/mach-bf537/defBF537.h b/include/asm-blackfin/mach-bf537/defBF537.h
index 3f455909c41..abde24c6d3b 100644
--- a/include/asm-blackfin/mach-bf537/defBF537.h
+++ b/include/asm-blackfin/mach-bf537/defBF537.h
@@ -290,6 +290,7 @@
 #define	PHYIE		0x00000001	/* PHY_INT Interrupt Enable                                                     */
 #define	RXDWA		0x00000002	/* Receive Frame DMA Word Alignment (Odd/Even*)         */
 #define	RXCKS		0x00000004	/* Enable RX Frame TCP/UDP Checksum Computation         */
+#define	TXDWA		0x00000010	/* Transmit Frame DMA Word Alignment (Odd/Even*)        */
 #define	MDCDIV		0x00003F00	/* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]          */
 
 #define	SET_MDCDIV(x)	(((x)&0x3F)<< 8)	/* Set MDC Clock Divisor                                */
-- 
cgit v1.2.3


From 4f13f548cef5af1717cbbc341a1a3474f3e7466e Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Tue, 15 Jul 2008 16:38:28 +0800
Subject: Blackfin arch: Fix BUG - JUMP error in kernel (relocation truncated
 to fit: R_pcrel12_jump_s)

Use long jump

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/cplb-nompu/cplbhdlr.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
index 2788532de72..ecbabc0a1fe 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
+++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
@@ -125,6 +125,6 @@ ENTRY(__cplb_hdr)
 	SP += -12;
 	call _panic_cplb_error;
 	SP += 12;
-	JUMP _handle_bad_cplb;
+	JUMP.L _handle_bad_cplb;
 
 ENDPROC(__cplb_hdr)
-- 
cgit v1.2.3


From 1efc80b53eb54770139219f99657abd92595fc86 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Sat, 19 Jul 2008 16:57:32 +0800
Subject: Blackfin arch: Functional power management support

Enable: PM_SUSPEND_MEM -> Blackfin Hibernate to SDRAM
This feature requires a special bootloader (u-boot)
supporting return from hibernate.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/Kconfig                  |  66 +++-
 arch/blackfin/kernel/bfin_dma_5xx.c    |  26 ++
 arch/blackfin/kernel/bfin_gpio.c       | 118 ++++++-
 arch/blackfin/mach-common/dpmc_modes.S | 600 +++++++++++++++++++++++++++++++--
 arch/blackfin/mach-common/pm.c         | 225 ++++++++++++-
 include/asm-blackfin/dma.h             |   8 +
 include/asm-blackfin/dpmc.h            |  82 ++---
 include/asm-blackfin/gpio.h            |  19 +-
 include/asm-blackfin/mach-bf548/gpio.h |   8 +
 9 files changed, 1033 insertions(+), 119 deletions(-)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index c602727d1a9..8f21b78b2e6 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -880,7 +880,7 @@ config ARCH_SUSPEND_POSSIBLE
 	depends on !SMP
 
 choice
-	prompt "Default Power Saving Mode"
+	prompt "Standby Power Saving Mode"
 	depends on PM
 	default PM_BFIN_SLEEP_DEEPER
 config  PM_BFIN_SLEEP_DEEPER
@@ -899,6 +899,8 @@ config  PM_BFIN_SLEEP_DEEPER
 	  normal during Sleep Deeper, due to the reduced SCLK frequency.
 	  When in the sleep mode, system DMA access to L1 memory is not supported.
 
+	  If unsure, select "Sleep Deeper".
+
 config  PM_BFIN_SLEEP
 	bool "Sleep"
 	help
@@ -906,15 +908,17 @@ config  PM_BFIN_SLEEP
 	  dissipation by disabling the clock to the processor core (CCLK).
 	  The PLL and system clock (SCLK), however, continue to operate in
 	  this mode. Typically an external event or RTC activity will wake
-	  up the processor. When in the sleep mode,
-	  system DMA access to L1 memory is not supported.
+	  up the processor. When in the sleep mode, system DMA access to L1
+	  memory is not supported.
+
+	  If unsure, select "Sleep Deeper".
 endchoice
 
 config PM_WAKEUP_BY_GPIO
-	bool "Cause Wakeup Event by GPIO"
+	bool "Allow Wakeup from Standby by GPIO"
 
 config PM_WAKEUP_GPIO_NUMBER
-	int "Wakeup GPIO number"
+	int "GPIO number"
 	range 0 47
 	depends on PM_WAKEUP_BY_GPIO
 	default 2 if BFIN537_STAMP
@@ -935,6 +939,58 @@ config  PM_WAKEUP_GPIO_POLAR_EDGE_B
 	bool "Both EDGE"
 endchoice
 
+comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
+	depends on PM
+
+config PM_BFIN_WAKE_RTC
+	bool "Allow Wake-Up from RESET and on-chip RTC"
+	depends on PM
+	default n
+	help
+	  Enable RTC Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_PH6
+	bool "Allow Wake-Up from on-chip PHY or PH6 GP"
+	depends on PM && (BF52x || BF534 || BF536 || BF537)
+	default n
+	help
+	  Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_CAN
+	bool "Allow Wake-Up from on-chip CAN0/1"
+	depends on PM && (BF54x || BF534 || BF536 || BF537)
+	default n
+	help
+	  Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_GP
+	bool "Allow Wake-Up from GPIOs"
+	depends on PM && BF54x
+	default n
+	help
+	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_USB
+	bool "Allow Wake-Up from on-chip USB"
+	depends on PM && (BF54x || BF52x)
+	default n
+	help
+	  Enable USB Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_KEYPAD
+	bool "Allow Wake-Up from on-chip Keypad"
+	depends on PM && BF54x
+	default n
+	help
+	  Enable Keypad Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_ROTARY
+	bool "Allow Wake-Up from on-chip Rotary"
+	depends on PM && BF54x
+	default n
+	help
+	  Enable Rotary Wake-Up (Voltage Regulator Power-Up)
+
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index d54f19085f3..ad0e75845ac 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -472,6 +472,32 @@ unsigned long get_dma_curr_addr(unsigned int channel)
 }
 EXPORT_SYMBOL(get_dma_curr_addr);
 
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) {
+		if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) {
+			printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
+			return -EBUSY;
+		}
+
+		dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
+	}
+
+	return 0;
+}
+
+void blackfin_dma_resume(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++)
+		dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+}
+#endif
+
 static void *__dma_memcpy(void *dest, const void *src, size_t size)
 {
 	int direction;	/* 1 - address decrease, 0 - address increase */
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index b6d89d1644c..ecbd141e0ef 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -186,7 +186,10 @@ static struct str_ident {
 	char name[RESOURCE_LABEL_SIZE];
 } str_ident[MAX_RESOURCES];
 
-#if defined(CONFIG_PM) && !defined(CONFIG_BF54x)
+#if defined(CONFIG_PM)
+#if defined(CONFIG_BF54x)
+static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
+#else
 static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
 static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -206,7 +209,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INT
 #ifdef BF561_FAMILY
 static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
 #endif
-
+#endif
 #endif /* CONFIG_PM */
 
 #if defined(BF548_FAMILY)
@@ -667,7 +670,7 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
 	return 0;
 }
 
-u32 bfin_pm_setup(void)
+u32 bfin_pm_standby_setup(void)
 {
 	u16 bank, mask, i, gpio;
 
@@ -679,7 +682,7 @@ u32 bfin_pm_setup(void)
 		gpio_bankb[bank]->maskb = 0;
 
 		if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
 			gpio_bank_saved[bank].fer   = *port_fer[bank];
 #endif
 			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
@@ -715,7 +718,7 @@ u32 bfin_pm_setup(void)
 	return 0;
 }
 
-void bfin_pm_restore(void)
+void bfin_pm_standby_restore(void)
 {
 	u16 bank, mask, i;
 
@@ -724,7 +727,7 @@ void bfin_pm_restore(void)
 		bank = gpio_bank(i);
 
 		if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
 			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
 #endif
 			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
@@ -743,8 +746,111 @@ void bfin_pm_restore(void)
 	AWA_DUMMY_READ(maskb);
 }
 
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+			gpio_bank_saved[bank].fer   = *port_fer[bank];
+#ifdef BF527_FAMILY
+			gpio_bank_saved[bank].mux   = *port_mux[bank];
+#else
+			if (bank == 0)
+				gpio_bank_saved[bank].mux   = bfin_read_PORT_MUX();
+#endif
+#endif
+			gpio_bank_saved[bank].data  = gpio_bankb[bank]->data;
+			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
+			gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
+			gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
+			gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
+			gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
+			gpio_bank_saved[bank].maska  = gpio_bankb[bank]->maska;
+	}
+
+	AWA_DUMMY_READ(maska);
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+			bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#ifdef BF527_FAMILY
+			*port_mux[bank] = gpio_bank_saved[bank].mux;
+#else
+			if (bank == 0)
+				bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+#endif
+			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
+#endif
+			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
+			gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
+			gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
+			gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
+			gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+
+			gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
+							| gpio_bank_saved[bank].dir;
+
+			gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
+	}
+	AWA_DUMMY_READ(maska);
+}
+
+
 #endif
 #else /* BF548_FAMILY */
+#ifdef CONFIG_PM
+
+u32 bfin_pm_standby_setup(void)
+{
+	return 0;
+}
+
+void bfin_pm_standby_restore(void)
+{
+
+}
+
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+			gpio_bank_saved[bank].fer  = gpio_array[bank]->port_fer;
+			gpio_bank_saved[bank].mux  = gpio_array[bank]->port_mux;
+			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+			gpio_bank_saved[bank].inen  = gpio_array[bank]->port_inen;
+			gpio_bank_saved[bank].dir   = gpio_array[bank]->port_dir_set;
+	}
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+			bank = gpio_bank(i);
+
+			gpio_array[bank]->port_mux  = gpio_bank_saved[bank].mux;
+			gpio_array[bank]->port_fer  = gpio_bank_saved[bank].fer;
+			gpio_array[bank]->port_inen  = gpio_bank_saved[bank].inen;
+			gpio_array[bank]->port_dir_set   = gpio_bank_saved[bank].dir;
+			gpio_array[bank]->port_set = gpio_bank_saved[bank].data
+							| gpio_bank_saved[bank].dir;
+	}
+}
+#endif
 
 unsigned short get_gpio_dir(unsigned gpio)
 {
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index b7981d31c39..46ee77afed2 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -7,7 +7,7 @@
 #include <linux/linkage.h>
 #include <asm/blackfin.h>
 #include <asm/mach/irq.h>
-
+#include <asm/dpmc.h>
 
 .section .l1.text
 
@@ -56,26 +56,25 @@ ENTRY(_hibernate_mode)
 	[--SP] = ( R7:0, P5:0 );
 	[--SP] =  RETS;
 
+	R3 = R0;
+	R0 = IWR_DISABLE_ALL;
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
 	call _set_sic_iwr;
+	call _set_dram_srfs;
+	SSYNC;
 
 	R0 = 0xFFFF (Z);
 	call _set_rtc_istat;
 
 	P0.H = hi(VR_CTL);
 	P0.L = lo(VR_CTL);
-	R1 = W[P0](z);
-	BITSET (R1, 8);
-	BITCLR (R1, 0);
-	BITCLR (R1, 1);
-	W[P0] = R1.L;
-	SSYNC;
 
+	W[P0] = R3.L;
 	CLI R2;
 	IDLE;
-
-	/* Actually, adding anything may not be necessary...SDRAM contents
-	 * are lost
-	 */
+.Lforever:
+	jump .Lforever;
 
 ENTRY(_deep_sleep)
 	[--SP] = ( R7:0, P5:0 );
@@ -233,51 +232,70 @@ ENTRY(_sleep_deeper)
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
 
+
 ENTRY(_set_dram_srfs)
 	/*  set the dram to self refresh mode */
-#if defined(CONFIG_BF54x)
+	SSYNC;
+#if defined(EBIU_RSTCTL)	/* DDR */
 	P0.H = hi(EBIU_RSTCTL);
 	P0.L = lo(EBIU_RSTCTL);
 	R2 = [P0];
-	R3.H = hi(SRREQ);
-	R3.L = lo(SRREQ);
-#else
-	P0.H = hi(EBIU_SDGCTL);
+	BITSET(R2, 3); /* SRREQ enter self-refresh mode */
+	[P0] = R2;
+	SSYNC;
+1:
+	R2 = [P0];
+	CC = BITTST(R2, 4);
+	if !CC JUMP 1b;
+#else 				/* SDRAM */
 	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
 	R2 = [P0];
-	R3.H = hi(SRFS);
-	R3.L = lo(SRFS);
-#endif
-	R2 = R2|R3;
+	BITSET(R2, 24); /* SRFS enter self-refresh mode */
 	[P0] = R2;
-	ssync;
-#if defined(CONFIG_BF54x)
-.LSRR_MODE:
+	SSYNC;
+
+	P0.L = lo(EBIU_SDSTAT);
+	P0.H = hi(EBIU_SDSTAT);
+1:
+	R2 = w[P0];
+	SSYNC;
+	cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */
+	if !cc jump 1b;
+
+	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
 	R2 = [P0];
-	CC = BITTST(R2, 4);
-	if !CC JUMP .LSRR_MODE;
+	BITCLR(R2, 0); /* SCTLE disable CLKOUT */
+	[P0] = R2;
 #endif
 	RTS;
 
+
 ENTRY(_unset_dram_srfs)
 	/*  set the dram out of self refresh mode */
-#if defined(CONFIG_BF54x)
+#if defined(EBIU_RSTCTL)	/* DDR */
 	P0.H = hi(EBIU_RSTCTL);
 	P0.L = lo(EBIU_RSTCTL);
 	R2 = [P0];
-	R3.H = hi(SRREQ);
-	R3.L = lo(SRREQ);
-#else
+	BITCLR(R2, 3); /* clear SRREQ bit */
+	[P0] = R2;
+#elif defined(EBIU_SDGCTL)	/* SDRAM */
+
+	P0.L = lo(EBIU_SDGCTL); /* release CLKOUT from self-refresh */
 	P0.H = hi(EBIU_SDGCTL);
-	P0.L = lo(EBIU_SDGCTL);
 	R2 = [P0];
-	R3.H = hi(SRFS);
-	R3.L = lo(SRFS);
+	BITSET(R2, 0); /* SCTLE enable CLKOUT */
+	[P0] = R2
+	SSYNC;
+
+	P0.L = lo(EBIU_SDGCTL); /* release SDRAM from self-refresh */
+	P0.H = hi(EBIU_SDGCTL);
+	R2 = [P0];
+	BITCLR(R2, 24); /* clear SRFS bit */
+	[P0] = R2
 #endif
-	R3 = ~R3;
-	R2 = R2&R3;
-	[P0] = R2;
-	ssync;
+	SSYNC;
 	RTS;
 
 ENTRY(_set_sic_iwr)
@@ -307,6 +325,11 @@ ENTRY(_set_rtc_istat)
 	P0.L = lo(RTC_ISTAT);
 	w[P0] = R0.L;
 	SSYNC;
+#elif (ANOMALY_05000371)
+	nop;
+	nop;
+	nop;
+	nop;
 #endif
 	RTS;
 
@@ -318,3 +341,508 @@ ENTRY(_test_pll_locked)
 	CC = BITTST(R0,5);
 	IF !CC JUMP 1b;
 	RTS;
+
+.section .text
+
+
+ENTRY(_do_hibernate)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] =  RETS;
+	/* Save System MMRs */
+	R2 = R0;
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+
+#ifdef SIC_IMASK0
+	PM_SYS_PUSH(SIC_IMASK0)
+#endif
+#ifdef SIC_IMASK1
+	PM_SYS_PUSH(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK2
+	PM_SYS_PUSH(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK
+	PM_SYS_PUSH(SIC_IMASK)
+#endif
+#ifdef SICA_IMASK0
+	PM_SYS_PUSH(SICA_IMASK0)
+#endif
+#ifdef SICA_IMASK1
+	PM_SYS_PUSH(SICA_IMASK1)
+#endif
+#ifdef SIC_IAR2
+	PM_SYS_PUSH(SIC_IAR0)
+	PM_SYS_PUSH(SIC_IAR1)
+	PM_SYS_PUSH(SIC_IAR2)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_PUSH(SIC_IAR3)
+#endif
+#ifdef SIC_IAR4
+	PM_SYS_PUSH(SIC_IAR4)
+	PM_SYS_PUSH(SIC_IAR5)
+	PM_SYS_PUSH(SIC_IAR6)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_PUSH(SIC_IAR7)
+#endif
+#ifdef SIC_IAR8
+	PM_SYS_PUSH(SIC_IAR8)
+	PM_SYS_PUSH(SIC_IAR9)
+	PM_SYS_PUSH(SIC_IAR10)
+	PM_SYS_PUSH(SIC_IAR11)
+#endif
+
+#ifdef SICA_IAR0
+	PM_SYS_PUSH(SICA_IAR0)
+	PM_SYS_PUSH(SICA_IAR1)
+	PM_SYS_PUSH(SICA_IAR2)
+	PM_SYS_PUSH(SICA_IAR3)
+	PM_SYS_PUSH(SICA_IAR4)
+	PM_SYS_PUSH(SICA_IAR5)
+	PM_SYS_PUSH(SICA_IAR6)
+	PM_SYS_PUSH(SICA_IAR7)
+#endif
+
+#ifdef SIC_IWR
+	PM_SYS_PUSH(SIC_IWR)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_PUSH(SIC_IWR0)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_PUSH(SIC_IWR1)
+#endif
+#ifdef SIC_IWR2
+	PM_SYS_PUSH(SIC_IWR2)
+#endif
+#ifdef SICA_IWR0
+	PM_SYS_PUSH(SICA_IWR0)
+#endif
+#ifdef SICA_IWR1
+	PM_SYS_PUSH(SICA_IWR1)
+#endif
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_PUSH(PINT0_ASSIGN)
+	PM_SYS_PUSH(PINT1_ASSIGN)
+	PM_SYS_PUSH(PINT2_ASSIGN)
+	PM_SYS_PUSH(PINT3_ASSIGN)
+#endif
+
+	PM_SYS_PUSH(EBIU_AMBCTL0)
+	PM_SYS_PUSH(EBIU_AMBCTL1)
+	PM_SYS_PUSH16(EBIU_AMGCTL)
+
+#ifdef EBIU_FCTL
+	PM_SYS_PUSH(EBIU_MBSCTL)
+	PM_SYS_PUSH(EBIU_MODE)
+	PM_SYS_PUSH(EBIU_FCTL)
+#endif
+
+	PM_SYS_PUSH16(SYSCR)
+
+	/* Save Core MMRs */
+	P0.H = hi(SRAM_BASE_ADDRESS);
+	P0.L = lo(SRAM_BASE_ADDRESS);
+
+	PM_PUSH(DMEM_CONTROL)
+	PM_PUSH(DCPLB_ADDR0)
+	PM_PUSH(DCPLB_ADDR1)
+	PM_PUSH(DCPLB_ADDR2)
+	PM_PUSH(DCPLB_ADDR3)
+	PM_PUSH(DCPLB_ADDR4)
+	PM_PUSH(DCPLB_ADDR5)
+	PM_PUSH(DCPLB_ADDR6)
+	PM_PUSH(DCPLB_ADDR7)
+	PM_PUSH(DCPLB_ADDR8)
+	PM_PUSH(DCPLB_ADDR9)
+	PM_PUSH(DCPLB_ADDR10)
+	PM_PUSH(DCPLB_ADDR11)
+	PM_PUSH(DCPLB_ADDR12)
+	PM_PUSH(DCPLB_ADDR13)
+	PM_PUSH(DCPLB_ADDR14)
+	PM_PUSH(DCPLB_ADDR15)
+	PM_PUSH(DCPLB_DATA0)
+	PM_PUSH(DCPLB_DATA1)
+	PM_PUSH(DCPLB_DATA2)
+	PM_PUSH(DCPLB_DATA3)
+	PM_PUSH(DCPLB_DATA4)
+	PM_PUSH(DCPLB_DATA5)
+	PM_PUSH(DCPLB_DATA6)
+	PM_PUSH(DCPLB_DATA7)
+	PM_PUSH(DCPLB_DATA8)
+	PM_PUSH(DCPLB_DATA9)
+	PM_PUSH(DCPLB_DATA10)
+	PM_PUSH(DCPLB_DATA11)
+	PM_PUSH(DCPLB_DATA12)
+	PM_PUSH(DCPLB_DATA13)
+	PM_PUSH(DCPLB_DATA14)
+	PM_PUSH(DCPLB_DATA15)
+	PM_PUSH(IMEM_CONTROL)
+	PM_PUSH(ICPLB_ADDR0)
+	PM_PUSH(ICPLB_ADDR1)
+	PM_PUSH(ICPLB_ADDR2)
+	PM_PUSH(ICPLB_ADDR3)
+	PM_PUSH(ICPLB_ADDR4)
+	PM_PUSH(ICPLB_ADDR5)
+	PM_PUSH(ICPLB_ADDR6)
+	PM_PUSH(ICPLB_ADDR7)
+	PM_PUSH(ICPLB_ADDR8)
+	PM_PUSH(ICPLB_ADDR9)
+	PM_PUSH(ICPLB_ADDR10)
+	PM_PUSH(ICPLB_ADDR11)
+	PM_PUSH(ICPLB_ADDR12)
+	PM_PUSH(ICPLB_ADDR13)
+	PM_PUSH(ICPLB_ADDR14)
+	PM_PUSH(ICPLB_ADDR15)
+	PM_PUSH(ICPLB_DATA0)
+	PM_PUSH(ICPLB_DATA1)
+	PM_PUSH(ICPLB_DATA2)
+	PM_PUSH(ICPLB_DATA3)
+	PM_PUSH(ICPLB_DATA4)
+	PM_PUSH(ICPLB_DATA5)
+	PM_PUSH(ICPLB_DATA6)
+	PM_PUSH(ICPLB_DATA7)
+	PM_PUSH(ICPLB_DATA8)
+	PM_PUSH(ICPLB_DATA9)
+	PM_PUSH(ICPLB_DATA10)
+	PM_PUSH(ICPLB_DATA11)
+	PM_PUSH(ICPLB_DATA12)
+	PM_PUSH(ICPLB_DATA13)
+	PM_PUSH(ICPLB_DATA14)
+	PM_PUSH(ICPLB_DATA15)
+	PM_PUSH(EVT0)
+	PM_PUSH(EVT1)
+	PM_PUSH(EVT2)
+	PM_PUSH(EVT3)
+	PM_PUSH(EVT4)
+	PM_PUSH(EVT5)
+	PM_PUSH(EVT6)
+	PM_PUSH(EVT7)
+	PM_PUSH(EVT8)
+	PM_PUSH(EVT9)
+	PM_PUSH(EVT10)
+	PM_PUSH(EVT11)
+	PM_PUSH(EVT12)
+	PM_PUSH(EVT13)
+	PM_PUSH(EVT14)
+	PM_PUSH(EVT15)
+	PM_PUSH(IMASK)
+	PM_PUSH(ILAT)
+	PM_PUSH(IPRIO)
+	PM_PUSH(TCNTL)
+	PM_PUSH(TPERIOD)
+	PM_PUSH(TSCALE)
+	PM_PUSH(TCOUNT)
+	PM_PUSH(TBUFCTL)
+
+	/* Save Core Registers */
+	[--sp] = SYSCFG;
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+	[--sp] = CYCLES;
+	[--sp] = CYCLES2;
+
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+
+	/* Save Magic, return address and Stack Pointer */
+	P0.H = 0;
+	P0.L = 0;
+	R0.H = 0xDEAD;	/* Hibernate Magic */
+	R0.L = 0xBEEF;
+	[P0++] = R0;	/* Store Hibernate Magic */
+	R0.H = pm_resume_here;
+	R0.L = pm_resume_here;
+	[P0++] = R0;	/* Save Return Address */
+	[P0++] = SP;	/* Save Stack Pointer */
+	P0.H = _hibernate_mode;
+	P0.L = _hibernate_mode;
+	R0 = R2;
+	call (P0); /* Goodbye */
+
+pm_resume_here:
+
+	/* Restore Core Registers */
+	SEQSTAT = [sp++];
+	RETE = [sp++];
+	RETN = [sp++];
+	RETX = [sp++];
+	r0 = [sp++];
+	RETI = r0;
+	RETS = [sp++];
+
+	CYCLES2 = [sp++];
+	CYCLES = [sp++];
+	ASTAT = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+	b3 = [sp++];
+	b2 = [sp++];
+	b1 = [sp++];
+	b0 = [sp++];
+
+	l3 = [sp++];
+	l2 = [sp++];
+	l1 = [sp++];
+	l0 = [sp++];
+
+	m3 = [sp++];
+	m2 = [sp++];
+	m1 = [sp++];
+	m0 = [sp++];
+
+	i3 = [sp++];
+	i2 = [sp++];
+	i1 = [sp++];
+	i0 = [sp++];
+
+	usp = [sp++];
+	fp = [sp++];
+
+	( R7 : 0, P5 : 0) = [ SP ++ ];
+	SYSCFG = [sp++];
+
+	/* Restore Core MMRs */
+
+	PM_POP(TBUFCTL)
+	PM_POP(TCOUNT)
+	PM_POP(TSCALE)
+	PM_POP(TPERIOD)
+	PM_POP(TCNTL)
+	PM_POP(IPRIO)
+	PM_POP(ILAT)
+	PM_POP(IMASK)
+	PM_POP(EVT15)
+	PM_POP(EVT14)
+	PM_POP(EVT13)
+	PM_POP(EVT12)
+	PM_POP(EVT11)
+	PM_POP(EVT10)
+	PM_POP(EVT9)
+	PM_POP(EVT8)
+	PM_POP(EVT7)
+	PM_POP(EVT6)
+	PM_POP(EVT5)
+	PM_POP(EVT4)
+	PM_POP(EVT3)
+	PM_POP(EVT2)
+	PM_POP(EVT1)
+	PM_POP(EVT0)
+	PM_POP(ICPLB_DATA15)
+	PM_POP(ICPLB_DATA14)
+	PM_POP(ICPLB_DATA13)
+	PM_POP(ICPLB_DATA12)
+	PM_POP(ICPLB_DATA11)
+	PM_POP(ICPLB_DATA10)
+	PM_POP(ICPLB_DATA9)
+	PM_POP(ICPLB_DATA8)
+	PM_POP(ICPLB_DATA7)
+	PM_POP(ICPLB_DATA6)
+	PM_POP(ICPLB_DATA5)
+	PM_POP(ICPLB_DATA4)
+	PM_POP(ICPLB_DATA3)
+	PM_POP(ICPLB_DATA2)
+	PM_POP(ICPLB_DATA1)
+	PM_POP(ICPLB_DATA0)
+	PM_POP(ICPLB_ADDR15)
+	PM_POP(ICPLB_ADDR14)
+	PM_POP(ICPLB_ADDR13)
+	PM_POP(ICPLB_ADDR12)
+	PM_POP(ICPLB_ADDR11)
+	PM_POP(ICPLB_ADDR10)
+	PM_POP(ICPLB_ADDR9)
+	PM_POP(ICPLB_ADDR8)
+	PM_POP(ICPLB_ADDR7)
+	PM_POP(ICPLB_ADDR6)
+	PM_POP(ICPLB_ADDR5)
+	PM_POP(ICPLB_ADDR4)
+	PM_POP(ICPLB_ADDR3)
+	PM_POP(ICPLB_ADDR2)
+	PM_POP(ICPLB_ADDR1)
+	PM_POP(ICPLB_ADDR0)
+	PM_POP(IMEM_CONTROL)
+	PM_POP(DCPLB_DATA15)
+	PM_POP(DCPLB_DATA14)
+	PM_POP(DCPLB_DATA13)
+	PM_POP(DCPLB_DATA12)
+	PM_POP(DCPLB_DATA11)
+	PM_POP(DCPLB_DATA10)
+	PM_POP(DCPLB_DATA9)
+	PM_POP(DCPLB_DATA8)
+	PM_POP(DCPLB_DATA7)
+	PM_POP(DCPLB_DATA6)
+	PM_POP(DCPLB_DATA5)
+	PM_POP(DCPLB_DATA4)
+	PM_POP(DCPLB_DATA3)
+	PM_POP(DCPLB_DATA2)
+	PM_POP(DCPLB_DATA1)
+	PM_POP(DCPLB_DATA0)
+	PM_POP(DCPLB_ADDR15)
+	PM_POP(DCPLB_ADDR14)
+	PM_POP(DCPLB_ADDR13)
+	PM_POP(DCPLB_ADDR12)
+	PM_POP(DCPLB_ADDR11)
+	PM_POP(DCPLB_ADDR10)
+	PM_POP(DCPLB_ADDR9)
+	PM_POP(DCPLB_ADDR8)
+	PM_POP(DCPLB_ADDR7)
+	PM_POP(DCPLB_ADDR6)
+	PM_POP(DCPLB_ADDR5)
+	PM_POP(DCPLB_ADDR4)
+	PM_POP(DCPLB_ADDR3)
+	PM_POP(DCPLB_ADDR2)
+	PM_POP(DCPLB_ADDR1)
+	PM_POP(DCPLB_ADDR0)
+	PM_POP(DMEM_CONTROL)
+
+	/* Restore System MMRs */
+
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+	PM_SYS_POP16(SYSCR)
+
+#ifdef EBIU_FCTL
+	PM_SYS_POP(EBIU_FCTL)
+	PM_SYS_POP(EBIU_MODE)
+	PM_SYS_POP(EBIU_MBSCTL)
+#endif
+	PM_SYS_POP16(EBIU_AMGCTL)
+	PM_SYS_POP(EBIU_AMBCTL1)
+	PM_SYS_POP(EBIU_AMBCTL0)
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_POP(PINT3_ASSIGN)
+	PM_SYS_POP(PINT2_ASSIGN)
+	PM_SYS_POP(PINT1_ASSIGN)
+	PM_SYS_POP(PINT0_ASSIGN)
+#endif
+
+#ifdef SICA_IWR1
+	PM_SYS_POP(SICA_IWR1)
+#endif
+#ifdef SICA_IWR0
+	PM_SYS_POP(SICA_IWR0)
+#endif
+#ifdef SIC_IWR2
+	PM_SYS_POP(SIC_IWR2)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_POP(SIC_IWR1)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_POP(SIC_IWR0)
+#endif
+#ifdef SIC_IWR
+	PM_SYS_POP(SIC_IWR)
+#endif
+
+#ifdef SICA_IAR0
+	PM_SYS_POP(SICA_IAR7)
+	PM_SYS_POP(SICA_IAR6)
+	PM_SYS_POP(SICA_IAR5)
+	PM_SYS_POP(SICA_IAR4)
+	PM_SYS_POP(SICA_IAR3)
+	PM_SYS_POP(SICA_IAR2)
+	PM_SYS_POP(SICA_IAR1)
+	PM_SYS_POP(SICA_IAR0)
+#endif
+
+#ifdef SIC_IAR8
+	PM_SYS_POP(SIC_IAR11)
+	PM_SYS_POP(SIC_IAR10)
+	PM_SYS_POP(SIC_IAR9)
+	PM_SYS_POP(SIC_IAR8)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_POP(SIC_IAR7)
+#endif
+#ifdef SIC_IAR6
+	PM_SYS_POP(SIC_IAR6)
+	PM_SYS_POP(SIC_IAR5)
+	PM_SYS_POP(SIC_IAR4)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_POP(SIC_IAR3)
+#endif
+#ifdef SIC_IAR2
+	PM_SYS_POP(SIC_IAR2)
+	PM_SYS_POP(SIC_IAR1)
+	PM_SYS_POP(SIC_IAR0)
+#endif
+#ifdef SICA_IMASK1
+	PM_SYS_POP(SICA_IMASK1)
+#endif
+#ifdef SICA_IMASK0
+	PM_SYS_POP(SICA_IMASK0)
+#endif
+#ifdef SIC_IMASK
+	PM_SYS_POP(SIC_IMASK)
+#endif
+#ifdef SIC_IMASK2
+	PM_SYS_POP(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK1
+	PM_SYS_POP(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK0
+	PM_SYS_POP(SIC_IMASK0)
+#endif
+
+	[--sp] = RETI;	/* Clear Global Interrupt Disable */
+	SP += 4;
+
+	RETS = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 0be805ca423..4fe6a2366b1 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -38,8 +38,9 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
-#include <asm/dpmc.h>
 #include <asm/gpio.h>
+#include <asm/dma.h>
+#include <asm/dpmc.h>
 
 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
 #define WAKEUP_TYPE	PM_WAKE_HIGH
@@ -61,16 +62,17 @@
 #define WAKEUP_TYPE	PM_WAKE_BOTH_EDGES
 #endif
 
+
 void bfin_pm_suspend_standby_enter(void)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_PM_WAKEUP_BY_GPIO
 	gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
 #endif
 
-	u32 flags;
-
 	local_irq_save(flags);
-	bfin_pm_setup();
+	bfin_pm_standby_setup();
 
 #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
 	sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
@@ -78,7 +80,7 @@ void bfin_pm_suspend_standby_enter(void)
 	sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
 #endif
 
-	bfin_pm_restore();
+	bfin_pm_standby_restore();
 
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
 	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
@@ -93,6 +95,195 @@ void bfin_pm_suspend_standby_enter(void)
 	local_irq_restore(flags);
 }
 
+int bf53x_suspend_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH);
+	dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START,
+			L1_DATA_A_LENGTH);
+	dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+			(const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
+	memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
+			L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
+			L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+int bf53x_resume_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+	dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+			L1_DATA_A_LENGTH);
+	dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
+	memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+#ifdef CONFIG_BFIN_WB
+static void flushinv_all_dcache(void)
+{
+	u32 way, bank, subbank, set;
+	u32 status, addr;
+	u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+	for (bank = 0; bank < 2; ++bank) {
+		if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+			continue;
+
+		for (way = 0; way < 2; ++way)
+			for (subbank = 0; subbank < 4; ++subbank)
+				for (set = 0; set < 64; ++set) {
+
+					bfin_write_DTEST_COMMAND(
+						way << 26 |
+						bank << 23 |
+						subbank << 16 |
+						set << 5
+					);
+					CSYNC();
+					status = bfin_read_DTEST_DATA0();
+
+					/* only worry about valid/dirty entries */
+					if ((status & 0x3) != 0x3)
+						continue;
+
+					/* construct the address using the tag */
+					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+					/* flush it */
+					__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
+				}
+	}
+}
+#endif
+
+static inline void dcache_disable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	unsigned long ctrl;
+
+#ifdef CONFIG_BFIN_WB
+	flushinv_all_dcache();
+#endif
+	SSYNC();
+	ctrl = bfin_read_DMEM_CONTROL();
+	ctrl &= ~ENDCPLB;
+	bfin_write_DMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void dcache_enable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_DMEM_CONTROL();
+	ctrl |= ENDCPLB;
+	bfin_write_DMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void icache_disable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_IMEM_CONTROL();
+	ctrl &= ~ENICPLB;
+	bfin_write_IMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void icache_enable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_IMEM_CONTROL();
+	ctrl |= ENICPLB;
+	bfin_write_IMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+int bfin_pm_suspend_mem_enter(void)
+{
+	unsigned long flags;
+	int wakeup, ret;
+
+	unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
+					 + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
+					  GFP_KERNEL);
+
+	if (memptr == NULL) {
+		panic("bf53x_suspend_l1_mem malloc failed");
+		return -ENOMEM;
+	}
+
+	wakeup = bfin_read_VR_CTL() & ~FREQ;
+	wakeup |= SCKELOW;
+
+	/* FIXME: merge this somehow with set_irq_wake */
+#ifdef CONFIG_PM_BFIN_WAKE_RTC
+	wakeup |= WAKE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_PH6
+	wakeup |= PHYWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_CAN
+	wakeup |= CANWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_GP
+	wakeup |= GPWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_USB
+	wakeup |= USBWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD
+	wakeup |= KPADWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_ROTARY
+	wakeup |= ROTWE;
+#endif
+
+	local_irq_save(flags);
+
+	ret = blackfin_dma_suspend();
+
+	if (ret) {
+		local_irq_restore(flags);
+		kfree(memptr);
+		return ret;
+	}
+
+	bfin_gpio_pm_hibernate_suspend();
+
+	dcache_disable();
+	icache_disable();
+	bf53x_suspend_l1_mem(memptr);
+
+	do_hibernate(wakeup);	/* Goodbye */
+
+	bf53x_resume_l1_mem(memptr);
+
+	icache_enable();
+	dcache_enable();
+
+	bfin_gpio_pm_hibernate_restore();
+	blackfin_dma_resume();
+
+	local_irq_restore(flags);
+	kfree(memptr);
+
+	return 0;
+}
+
 /*
  *	bfin_pm_valid - Tell the PM core that we only support the standby sleep
  *			state
@@ -101,7 +292,24 @@ void bfin_pm_suspend_standby_enter(void)
  */
 static int bfin_pm_valid(suspend_state_t state)
 {
-	return (state == PM_SUSPEND_STANDBY);
+	return (state == PM_SUSPEND_STANDBY
+#ifndef BF533_FAMILY
+	/*
+	 * On BF533/2/1:
+	 * If we enter Hibernate the SCKE Pin is driven Low,
+	 * so that the SDRAM enters Self Refresh Mode.
+	 * However when the reset sequence that follows hibernate
+	 * state is executed, SCKE is driven High, taking the
+	 * SDRAM out of Self Refresh.
+	 *
+	 * If you reconfigure and access the SDRAM "very quickly",
+	 * you are likely to avoid errors, otherwise the SDRAM
+	 * start losing its contents.
+	 * An external HW workaround is possible using logic gates.
+	 */
+	|| state == PM_SUSPEND_MEM
+#endif
+	);
 }
 
 /*
@@ -115,10 +323,9 @@ static int bfin_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_STANDBY:
 		bfin_pm_suspend_standby_enter();
 		break;
-
 	case PM_SUSPEND_MEM:
-		return -ENOTSUPP;
-
+		bfin_pm_suspend_mem_enter();
+		break;
 	default:
 		return -EINVAL;
 	}
diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h
index c0d5259e315..3cd4b522aa3 100644
--- a/include/asm-blackfin/dma.h
+++ b/include/asm-blackfin/dma.h
@@ -144,8 +144,16 @@ struct dma_channel {
 	void *data;
 	unsigned int dma_enable_flag;
 	unsigned int loopback_flag;
+#ifdef CONFIG_PM
+	unsigned short saved_peripheral_map;
+#endif
 };
 
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void);
+void blackfin_dma_resume(void);
+#endif
+
 /*******************************************************************************
 *	DMA API's
 *******************************************************************************/
diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h
index 7f34cd384f1..de28e6e018b 100644
--- a/include/asm-blackfin/dpmc.h
+++ b/include/asm-blackfin/dpmc.h
@@ -7,63 +7,18 @@
 #ifndef _BLACKFIN_DPMC_H_
 #define _BLACKFIN_DPMC_H_
 
-#define SLEEP_MODE		1
-#define DEEP_SLEEP_MODE		2
-#define ACTIVE_PLL_DISABLED	3
-#define FULLON_MODE		4
-#define ACTIVE_PLL_ENABLED	5
-#define HIBERNATE_MODE		6
-
-#define IOCTL_FULL_ON_MODE	_IO('s', 0xA0)
-#define IOCTL_ACTIVE_MODE	_IO('s', 0xA1)
-#define IOCTL_SLEEP_MODE	_IO('s', 0xA2)
-#define IOCTL_DEEP_SLEEP_MODE	_IO('s', 0xA3)
-#define IOCTL_HIBERNATE_MODE	_IO('s', 0xA4)
-#define IOCTL_CHANGE_FREQUENCY	_IOW('s', 0xA5, unsigned long)
-#define IOCTL_CHANGE_VOLTAGE	_IOW('s', 0xA6, unsigned long)
-#define IOCTL_SET_CCLK		_IOW('s', 0xA7, unsigned long)
-#define IOCTL_SET_SCLK		_IOW('s', 0xA8, unsigned long)
-#define IOCTL_GET_PLLSTATUS	_IOW('s', 0xA9, unsigned long)
-#define IOCTL_GET_CORECLOCK	_IOW('s', 0xAA, unsigned long)
-#define IOCTL_GET_SYSTEMCLOCK	_IOW('s', 0xAB, unsigned long)
-#define IOCTL_GET_VCO		_IOW('s', 0xAC, unsigned long)
-#define IOCTL_DISABLE_WDOG_TIMER _IO('s', 0xAD)
-#define IOCTL_UNMASK_WDOG_WAKEUP_EVENT _IO('s',0xAE)
-#define IOCTL_PROGRAM_WDOG_TIMER _IOW('s',0xAF,unsigned long)
-#define IOCTL_CLEAR_WDOG_WAKEUP_EVENT _IO('s',0xB0)
-#define IOCTL_SLEEP_DEEPER_MODE _IO('s',0xB1)
-
-#define DPMC_MINOR		254
-
-#define ON	0
-#define OFF	1
-
 #ifdef __KERNEL__
+#ifndef __ASSEMBLY__
 
-unsigned long calc_volt(void);
-int calc_vlev(int vlt);
-unsigned long change_voltage(unsigned long volt);
-int calc_msel(int vco_hz);
-unsigned long change_frequency(unsigned long vco_mhz);
-int set_pll_div(unsigned short sel, unsigned char flag);
-int get_vco(void);
-unsigned long change_system_clock(unsigned long clock);
-unsigned long change_core_clock(unsigned long clock);
-unsigned long get_pll_status(void);
-void change_baud(int baud);
-void fullon_mode(void);
-void active_mode(void);
 void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
-void program_wdog_timer(unsigned long);
-void unmask_wdog_wakeup_evt(void);
-void clear_wdog_wakeup_evt(void);
-void disable_wdog_timer(void);
+void do_hibernate(int wakeup);
+void set_dram_srfs(void);
+void unset_dram_srfs(void);
 
-extern unsigned long get_cclk(void);
-extern unsigned long get_sclk(void);
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
 
 struct bfin_dpmc_platform_data {
 	const unsigned int *tuple_tab;
@@ -71,8 +26,33 @@ struct bfin_dpmc_platform_data {
 	unsigned short vr_settling_time; /* in us */
 };
 
-#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+#else
+
+#define PM_PUSH(x) \
+	R0 = [P0 + (x - SRAM_BASE_ADDRESS)];\
+	[--SP] =  R0;\
+
+#define PM_POP(x) \
+	R0 = [SP++];\
+	[P0 + (x - SRAM_BASE_ADDRESS)] = R0;\
+
+#define PM_SYS_PUSH(x) \
+	R0 = [P0 + (x - PLL_CTL)];\
+	[--SP] =  R0;\
+
+#define PM_SYS_POP(x) \
+	R0 = [SP++];\
+	[P0 + (x - PLL_CTL)] = R0;\
+
+#define PM_SYS_PUSH16(x) \
+	R0 = w[P0 + (x - PLL_CTL)];\
+	[--SP] =  R0;\
+
+#define PM_SYS_POP16(x) \
+	R0 = [SP++];\
+	w[P0 + (x - PLL_CTL)] = R0;\
 
+#endif
 #endif	/* __KERNEL__ */
 
 #endif	/*_BLACKFIN_DPMC_H_*/
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index ff95e9d8834..168f1251eb4 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -376,8 +376,12 @@ struct gpio_port_t {
 #endif
 
 #ifdef CONFIG_PM
-unsigned int bfin_pm_setup(void);
-void bfin_pm_restore(void);
+
+unsigned int bfin_pm_standby_setup(void);
+void bfin_pm_standby_restore(void);
+
+void bfin_gpio_pm_hibernate_restore(void);
+void bfin_gpio_pm_hibernate_suspend(void);
 
 #ifndef CONFIG_BF54x
 #define PM_WAKE_RISING	0x1
@@ -392,17 +396,8 @@ void gpio_pm_wakeup_free(unsigned gpio);
 
 struct gpio_port_s {
 	unsigned short data;
-	unsigned short data_clear;
-	unsigned short data_set;
-	unsigned short toggle;
 	unsigned short maska;
-	unsigned short maska_clear;
-	unsigned short maska_set;
-	unsigned short maska_toggle;
 	unsigned short maskb;
-	unsigned short maskb_clear;
-	unsigned short maskb_set;
-	unsigned short maskb_toggle;
 	unsigned short dir;
 	unsigned short polar;
 	unsigned short edge;
@@ -411,10 +406,10 @@ struct gpio_port_s {
 
 	unsigned short fer;
 	unsigned short reserved;
+	unsigned short mux;
 };
 #endif /*CONFIG_BF54x*/
 #endif /*CONFIG_PM*/
-
 /***********************************************************
 *
 * FUNCTIONS: Blackfin GPIO Driver
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h
index cb8b0f15c9a..bba82dc75f1 100644
--- a/include/asm-blackfin/mach-bf548/gpio.h
+++ b/include/asm-blackfin/mach-bf548/gpio.h
@@ -209,3 +209,11 @@ struct gpio_port_t {
 	unsigned short dummy7;
 	unsigned int port_mux;
 };
+
+struct gpio_port_s {
+	unsigned short fer;
+	unsigned short data;
+	unsigned short dir;
+	unsigned short inen;
+	unsigned int mux;
+};
-- 
cgit v1.2.3


From 2cfebf2bceff4645b403246b608b1bb6222e4deb Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Wed, 16 Jul 2008 16:59:05 +0800
Subject: Blackfin arch: Add ANOMALY_05000368 workaround

Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/entry.S | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 65f4e67a65c..31bd9bf3efa 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -64,6 +64,11 @@ ENDPROC(_ret_from_fork)
 
 ENTRY(_sys_fork)
 	r0 = -EINVAL;
+#if (ANOMALY_05000371)
+	nop;
+	nop;
+	nop;
+#endif
 	rts;
 ENDPROC(_sys_fork)
 
-- 
cgit v1.2.3


From 6546eae4fd90ab11ca7ab6d6b9e1b243d1ce5fe6 Mon Sep 17 00:00:00 2001
From: Jie Zhang <jie.zhang@analog.com>
Date: Tue, 15 Jul 2008 16:15:40 +0800
Subject: Blackfin arch: Allow ptrace to peek and poke application data in L1
 data SRAM.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/ptrace.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index f51ab088098..bf1a51d8e60 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -219,6 +219,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				safe_dma_memcpy (&tmp, (const void *)(addr + add), sizeof(tmp));
 				copied = sizeof(tmp);
 			} else
+#endif
+#if L1_DATA_A_LENGTH != 0
+			if (addr + add >= L1_DATA_A_START
+			    && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+				copied = sizeof(tmp);
+			} else
+#endif
+#if L1_DATA_B_LENGTH != 0
+			if (addr + add >= L1_DATA_B_START
+			    && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+				copied = sizeof(tmp);
+			} else
 #endif
 			if (addr + add >= FIXED_CODE_START
 			    && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
@@ -289,6 +303,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				safe_dma_memcpy ((void *)(addr + add), &data, sizeof(data));
 				copied = sizeof(data);
 			} else
+#endif
+#if L1_DATA_A_LENGTH != 0
+			if (addr + add >= L1_DATA_A_START
+			    && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy((void *)(addr + add), &data, sizeof(data));
+				copied = sizeof(data);
+			} else
+#endif
+#if L1_DATA_B_LENGTH != 0
+			if (addr + add >= L1_DATA_B_START
+			    && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy((void *)(addr + add), &data, sizeof(data));
+				copied = sizeof(data);
+			} else
 #endif
 			if (addr + add >= FIXED_CODE_START
 			    && addr + add + sizeof(data) <= FIXED_CODE_END) {
-- 
cgit v1.2.3


From f6127efba1295b4668327b97014e678370028827 Mon Sep 17 00:00:00 2001
From: Rene Herman <rene.herman@gmail.com>
Date: Tue, 15 Jul 2008 03:00:21 +0200
Subject: ALSA: add TriTech 28023 AC97 codec ID and Wolfson 9701 name.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/ac97/ac97_codec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 07364c00768..8c49a00a5e3 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -161,6 +161,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = {
 { 0x50534304, 0xffffffff, "UCB1400",		patch_ucb1400,	NULL },
 { 0x53494c20, 0xffffffe0, "Si3036,8",		mpatch_si3036,	mpatch_si3036, AC97_MODEM_PATCH },
 { 0x54524102, 0xffffffff, "TR28022",		NULL,		NULL },
+{ 0x54524103, 0xffffffff, "TR28023",		NULL,		NULL },
 { 0x54524106, 0xffffffff, "TR28026",		NULL,		NULL },
 { 0x54524108, 0xffffffff, "TR28028",		patch_tritech_tr28028,	NULL }, // added by xin jin [07/09/99]
 { 0x54524123, 0xffffffff, "TR28602",		NULL,		NULL }, // only guess --jk [TR28023 = eMicro EM28023 (new CT1297)]
@@ -169,7 +170,7 @@ static const struct ac97_codec_id snd_ac97_codec_ids[] = {
 { 0x56494170, 0xffffffff, "VIA1617A",		patch_vt1617a,	NULL }, // modified VT1616 with S/PDIF
 { 0x56494182, 0xffffffff, "VIA1618",		NULL,		NULL },
 { 0x57454301, 0xffffffff, "W83971D",		NULL,		NULL },
-{ 0x574d4c00, 0xffffffff, "WM9701A",		NULL,		NULL },
+{ 0x574d4c00, 0xffffffff, "WM9701,WM9701A",	NULL,		NULL },
 { 0x574d4C03, 0xffffffff, "WM9703,WM9707,WM9708,WM9717", patch_wolfson03, NULL},
 { 0x574d4C04, 0xffffffff, "WM9704M,WM9704Q",	patch_wolfson04, NULL},
 { 0x574d4C05, 0xffffffff, "WM9705,WM9710",	patch_wolfson05, NULL},
-- 
cgit v1.2.3


From 2b30a55d4d09254d6b25814bf6ac0b7843afdc99 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 15 Jul 2008 15:07:19 +0200
Subject: ALSA: Au1xpsc: psc not disabled when TX is idle

TX idleness isn't tested, but RX twice. PSC is not disabled when TX is idle

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/au1x/psc-i2s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index ba4b5c199f2..9384702c7eb 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -231,7 +231,7 @@ static int au1xpsc_i2s_stop(struct au1xpsc_audio_data *pscdata, int stype)
 
 	/* if both TX and RX are idle, disable PSC */
 	stat = au_readl(I2S_STAT(pscdata));
-	if (!(stat & (PSC_I2SSTAT_RB | PSC_I2SSTAT_RB))) {
+	if (!(stat & (PSC_I2SSTAT_TB | PSC_I2SSTAT_RB))) {
 		au_writel(0, I2S_CFG(pscdata));
 		au_sync();
 		au_writel(PSC_CTRL_SUSPEND, PSC_CTRL(pscdata));
-- 
cgit v1.2.3


From 7dee62ac5a3e3f5aa7cc5069fa2d32cec5117229 Mon Sep 17 00:00:00 2001
From: Yi Li <yi.li@analog.com>
Date: Sat, 19 Jul 2008 20:53:46 +0800
Subject: Blackfin arch: Do not need this dualcore test module in kernel.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/Kconfig.debug          |  7 ------
 arch/blackfin/kernel/Makefile        |  1 -
 arch/blackfin/kernel/dualcore_test.c | 49 ------------------------------------
 3 files changed, 57 deletions(-)
 delete mode 100644 arch/blackfin/kernel/dualcore_test.c

diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index c61bdebb997..c468624d55f 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -154,13 +154,6 @@ config EARLY_PRINTK
 	  all of this lives in the init section and is thrown away after the
 	  kernel boots completely.
 
-config DUAL_CORE_TEST_MODULE
-	tristate "Dual Core Test Module"
-	depends on (BF561)
-	default n
-	help
-	  Say Y here to build-in dual core test module for dual core test.
-
 config CPLB_INFO
 	bool "Display the CPLB information"
 	help
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 6140cd69c78..606adc78aa8 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -18,6 +18,5 @@ endif
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_BFIN_DMA_5XX)           += bfin_dma_5xx.o
-obj-$(CONFIG_DUAL_CORE_TEST_MODULE)  += dualcore_test.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c
deleted file mode 100644
index 0fcba74840b..00000000000
--- a/arch/blackfin/kernel/dualcore_test.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * File:         arch/blackfin/kernel/dualcore_test.c
- * Based on:
- * Author:
- *
- * Created:
- * Description:  Small test code for CoreB on a BF561
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-static int *testarg = (int *)0xfeb00000;
-
-static int test_init(void)
-{
-	*testarg = 1;
-	printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
-	       *testarg, testarg);
-	return 0;
-}
-
-static void test_exit(void)
-{
-	printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg);
-}
-
-module_init(test_init);
-module_exit(test_exit);
-- 
cgit v1.2.3


From 1a8caeebe3689ad4ef67d7ff5d4143f7748deedd Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Wed, 16 Jul 2008 17:07:26 +0800
Subject: Blackfin arch: use local labels and ENDPROC() markings

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-common/dpmc_modes.S | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 46ee77afed2..5e3f1d8a4fb 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -51,6 +51,7 @@ ENTRY(_sleep_mode)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_sleep_mode)
 
 ENTRY(_hibernate_mode)
 	[--SP] = ( R7:0, P5:0 );
@@ -75,6 +76,7 @@ ENTRY(_hibernate_mode)
 	IDLE;
 .Lforever:
 	jump .Lforever;
+ENDPROC(_hibernate_mode)
 
 ENTRY(_deep_sleep)
 	[--SP] = ( R7:0, P5:0 );
@@ -130,6 +132,7 @@ ENTRY(_deep_sleep)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_deep_sleep)
 
 ENTRY(_sleep_deeper)
 	[--SP] = ( R7:0, P5:0 );
@@ -231,7 +234,7 @@ ENTRY(_sleep_deeper)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
-
+ENDPROC(_sleep_deeper)
 
 ENTRY(_set_dram_srfs)
 	/*  set the dram to self refresh mode */
@@ -270,7 +273,7 @@ ENTRY(_set_dram_srfs)
 	[P0] = R2;
 #endif
 	RTS;
-
+ENDPROC(_set_dram_srfs)
 
 ENTRY(_unset_dram_srfs)
 	/*  set the dram out of self refresh mode */
@@ -297,6 +300,7 @@ ENTRY(_unset_dram_srfs)
 #endif
 	SSYNC;
 	RTS;
+ENDPROC(_unset_dram_srfs)
 
 ENTRY(_set_sic_iwr)
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
@@ -318,6 +322,7 @@ ENTRY(_set_sic_iwr)
 
 	SSYNC;
 	RTS;
+ENDPROC(_set_sic_iwr)
 
 ENTRY(_set_rtc_istat)
 #ifndef CONFIG_BF561
@@ -332,6 +337,7 @@ ENTRY(_set_rtc_istat)
 	nop;
 #endif
 	RTS;
+ENDPROC(_set_rtc_istat)
 
 ENTRY(_test_pll_locked)
 	P0.H = hi(PLL_STAT);
@@ -341,10 +347,10 @@ ENTRY(_test_pll_locked)
 	CC = BITTST(R0,5);
 	IF !CC JUMP 1b;
 	RTS;
+ENDPROC(_test_pll_locked)
 
 .section .text
 
-
 ENTRY(_do_hibernate)
 	[--SP] = ( R7:0, P5:0 );
 	[--SP] =  RETS;
@@ -593,8 +599,8 @@ ENTRY(_do_hibernate)
 	R0.H = 0xDEAD;	/* Hibernate Magic */
 	R0.L = 0xBEEF;
 	[P0++] = R0;	/* Store Hibernate Magic */
-	R0.H = pm_resume_here;
-	R0.L = pm_resume_here;
+	R0.H = .Lpm_resume_here;
+	R0.L = .Lpm_resume_here;
 	[P0++] = R0;	/* Save Return Address */
 	[P0++] = SP;	/* Save Stack Pointer */
 	P0.H = _hibernate_mode;
@@ -602,7 +608,7 @@ ENTRY(_do_hibernate)
 	R0 = R2;
 	call (P0); /* Goodbye */
 
-pm_resume_here:
+.Lpm_resume_here:
 
 	/* Restore Core Registers */
 	SEQSTAT = [sp++];
@@ -846,3 +852,4 @@ pm_resume_here:
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_do_hibernate)
-- 
cgit v1.2.3


From e785d3d8fb5fab744d67fac9966229bcdc52db45 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 15 Jul 2008 16:28:43 +0200
Subject: ALSA: hda - Align BDL position adjustment parameter

It seems NVidia and other hardwares require the alignment for period
update timing.  For satisfying this condition, align the position
adjustment for delayed wake-up to the initial bdl_pos_adj value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_intel.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 16715a68ba5..ef9f072b47f 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1047,9 +1047,13 @@ static int azx_setup_periods(struct azx *chip,
 	pos_adj = bdl_pos_adj[chip->dev_index];
 	if (pos_adj > 0) {
 		struct snd_pcm_runtime *runtime = substream->runtime;
+		int pos_align = pos_adj;
 		pos_adj = (pos_adj * runtime->rate + 47999) / 48000;
 		if (!pos_adj)
-			pos_adj = 1;
+			pos_adj = pos_align;
+		else
+			pos_adj = ((pos_adj + pos_align - 1) / pos_align) *
+				pos_align;
 		pos_adj = frames_to_bytes(runtime, pos_adj);
 		if (pos_adj >= period_bytes) {
 			snd_printk(KERN_WARNING "Too big adjustment %d\n",
-- 
cgit v1.2.3


From 2dff41775decb9cb1f3a6ac577c78dc3eea60431 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Fri, 11 Jul 2008 17:31:15 -0500
Subject: powerpc: Document Freescale power management nodes, and the sleep
 property.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 Documentation/powerpc/booting-without-of.txt   | 142 +++++++++++++++++--------
 Documentation/powerpc/dts-bindings/fsl/pmc.txt |  63 +++++++++++
 2 files changed, 163 insertions(+), 42 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/pmc.txt

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index de2e5c05d6e..07ae2edff7c 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -77,10 +77,12 @@ Table of Contents
     3) OpenPIC Interrupt Controllers
     4) ISA Interrupt Controllers
 
-  VIII - Specifying GPIO information for devices
+  IX - Specifying GPIO information for devices
     1) gpios property
     2) gpio-controller nodes
 
+  X - Specifying device power management information (sleep property)
+
   Appendix A - Sample SOC node for MPC8540
 
 
@@ -2422,8 +2424,8 @@ encodings listed below:
 	2 =  high to low edge sensitive type enabled
 	3 =  low to high edge sensitive type enabled
 
-VIII - Specifying GPIO information for devices
-==============================================
+IX - Specifying GPIO information for devices
+============================================
 
 1) gpios property
 -----------------
@@ -2471,6 +2473,37 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
 		gpio-controller;
 	};
 
+X - Specifying Device Power Management Information (sleep property)
+===================================================================
+
+Devices on SOCs often have mechanisms for placing devices into low-power
+states that are decoupled from the devices' own register blocks.  Sometimes,
+this information is more complicated than a cell-index property can
+reasonably describe.  Thus, each device controlled in such a manner
+may contain a "sleep" property which describes these connections.
+
+The sleep property consists of one or more sleep resources, each of
+which consists of a phandle to a sleep controller, followed by a
+controller-specific sleep specifier of zero or more cells.
+
+The semantics of what type of low power modes are possible are defined
+by the sleep controller.  Some examples of the types of low power modes
+that may be supported are:
+
+ - Dynamic: The device may be disabled or enabled at any time.
+ - System Suspend: The device may request to be disabled or remain
+   awake during system suspend, but will not be disabled until then.
+ - Permanent: The device is disabled permanently (until the next hard
+   reset).
+
+Some devices may share a clock domain with each other, such that they should
+only be suspended when none of the devices are in use.  Where reasonable,
+such nodes should be placed on a virtual bus, where the bus has the sleep
+property.  If the clock domain is shared among devices that cannot be
+reasonably grouped in this manner, then create a virtual sleep controller
+(similar to an interrupt nexus, except that defining a standardized
+sleep-map should wait until its necessity is demonstrated).
+
 Appendix A - Sample SOC node for MPC8540
 ========================================
 
@@ -2487,47 +2520,48 @@ not necessary as they are usually the same as the root node.
 		reg = <e0000000 00003000>;
 		bus-frequency = <0>;
 
-		mdio@24520 {
-			reg = <24520 20>;
-			device_type = "mdio";
-			compatible = "gianfar";
-
-			ethernet-phy@0 {
-				linux,phandle = <2452000>
-				interrupt-parent = <40000>;
-				interrupts = <35 1>;
-				reg = <0>;
-				device_type = "ethernet-phy";
-			};
-
-			ethernet-phy@1 {
-				linux,phandle = <2452001>
-				interrupt-parent = <40000>;
-				interrupts = <35 1>;
-				reg = <1>;
-				device_type = "ethernet-phy";
-			};
-
-			ethernet-phy@3 {
-				linux,phandle = <2452002>
-				interrupt-parent = <40000>;
-				interrupts = <35 1>;
-				reg = <3>;
-				device_type = "ethernet-phy";
-			};
-
-		};
-
 		ethernet@24000 {
-			#size-cells = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			device_type = "network";
 			model = "TSEC";
-			compatible = "gianfar";
+			compatible = "gianfar", "simple-bus";
 			reg = <24000 1000>;
 			mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <d 3 e 3 12 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452000>;
+			sleep = <&pmc 00000080>;
+			ranges;
+
+			mdio@24520 {
+				reg = <24520 20>;
+				compatible = "fsl,gianfar-mdio";
+
+				ethernet-phy@0 {
+					linux,phandle = <2452000>
+					interrupt-parent = <40000>;
+					interrupts = <35 1>;
+					reg = <0>;
+					device_type = "ethernet-phy";
+				};
+
+				ethernet-phy@1 {
+					linux,phandle = <2452001>
+					interrupt-parent = <40000>;
+					interrupts = <35 1>;
+					reg = <1>;
+					device_type = "ethernet-phy";
+				};
+
+				ethernet-phy@3 {
+					linux,phandle = <2452002>
+					interrupt-parent = <40000>;
+					interrupts = <35 1>;
+					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+			};
 		};
 
 		ethernet@25000 {
@@ -2541,6 +2575,7 @@ not necessary as they are usually the same as the root node.
 			interrupts = <13 3 14 3 18 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452001>;
+			sleep = <&pmc 00000040>;
 		};
 
 		ethernet@26000 {
@@ -2554,15 +2589,33 @@ not necessary as they are usually the same as the root node.
 			interrupts = <19 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452002>;
+			sleep = <&pmc 00000020>;
 		};
 
 		serial@4500 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <4500 100>;
-			clock-frequency = <0>;
-			interrupts = <1a 3>;
-			interrupt-parent = <40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-duart", "simple-bus";
+			sleep = <&pmc 00000002>;
+			ranges;
+
+			serial@4500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <4500 100>;
+				clock-frequency = <0>;
+				interrupts = <1a 3>;
+				interrupt-parent = <40000>;
+			};
+
+			serial@4600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <4600 100>;
+				clock-frequency = <0>;
+				interrupts = <1a 3>;
+				interrupt-parent = <40000>;
+			};
 		};
 
 		pic@40000 {
@@ -2581,6 +2634,11 @@ not necessary as they are usually the same as the root node.
 			device_type = "i2c";
 			compatible  = "fsl-i2c";
 			dfsrr;
+			sleep = <&pmc 00000004>;
 		};
 
+		pmc: power@e0070 {
+			compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc";
+			reg = <e0070 20>;
+		};
 	};
diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
new file mode 100644
index 00000000000..02f6f43ee1b
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
@@ -0,0 +1,63 @@
+* Power Management Controller
+
+Properties:
+- compatible: "fsl,<chip>-pmc".
+
+  "fsl,mpc8349-pmc" should be listed for any chip whose PMC is
+  compatible.  "fsl,mpc8313-pmc" should also be listed for any chip
+  whose PMC is compatible, and implies deep-sleep capability.
+
+  "fsl,mpc8548-pmc" should be listed for any chip whose PMC is
+  compatible.  "fsl,mpc8536-pmc" should also be listed for any chip
+  whose PMC is compatible, and implies deep-sleep capability.
+
+  "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
+  compatible; all statements below that apply to "fsl,mpc8548-pmc" also
+  apply to "fsl,mpc8641d-pmc".
+
+  Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
+  bit assigments are indicated via the sleep specifier in each device's
+  sleep property.
+
+- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
+  is the PMC block, and the second resource is the Clock Configuration
+  block.
+
+  For devices compatible with "fsl,mpc8548-pmc", the first resource
+  is a 32-byte block beginning with DEVDISR.
+
+- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first
+  resource is the PMC block interrupt.
+
+- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices,
+  this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
+  a wakeup source from deep sleep.
+
+Sleep specifiers:
+
+  fsl,mpc8349-pmc: Sleep specifiers consist of one cell.  For each bit
+  that is set in the cell, the corresponding bit in SCCR will be saved
+  and cleared on suspend, and restored on resume.  This sleep controller
+  supports disabling and resuming devices at any time.
+
+  fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
+  which will be ORed into PMCDR upon suspend, and cleared from PMCDR
+  upon resume.  The first two cells are as described for fsl,mpc8578-pmc.
+  This sleep controller only supports disabling devices during system
+  sleep, or permanently.
+
+  fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
+  first of which will be ORed into DEVDISR (and the second into
+  DEVDISR2, if present -- this cell should be zero or absent if the
+  hardware does not have DEVDISR2) upon a request for permanent device
+  disabling.  This sleep controller does not support configuring devices
+  to disable during system sleep (unless supported by another compatible
+  match), or dynamically.
+
+Example:
+
+	power@b00 {
+		compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+		reg = <0xb00 0x100 0xa00 0x100>;
+		interrupts = <80 8>;
+	};
-- 
cgit v1.2.3


From 7e72063c9aaeb618815589cd4d57f26186e6fcad Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Wed, 25 Jun 2008 12:07:39 -0500
Subject: powerpc: Update example SOC node in booting-without-of.txt.

Convert to DTS version 1, eliminate some obsolete practices, and
correct some errors (compared to the actual 8540 device tree).

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 Documentation/powerpc/booting-without-of.txt | 87 +++++++++++-----------------
 1 file changed, 33 insertions(+), 54 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 07ae2edff7c..ddafbf2fb1f 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2507,18 +2507,14 @@ sleep-map should wait until its necessity is demonstrated).
 Appendix A - Sample SOC node for MPC8540
 ========================================
 
-Note that the #address-cells and #size-cells for the SoC node
-in this example have been explicitly listed; these are likely
-not necessary as they are usually the same as the root node.
-
-	soc8540@e0000000 {
+	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		#interrupt-cells = <2>;
+		compatible = "fsl,mpc8540-ccsr", "simple-bus";
 		device_type = "soc";
-		ranges = <00000000 e0000000 00100000>
-		reg = <e0000000 00003000>;
+		ranges = <0x00000000 0xe0000000 0x00100000>
 		bus-frequency = <0>;
+		interrupt-parent = <&pic>;
 
 		ethernet@24000 {
 			#address-cells = <1>;
@@ -2526,38 +2522,31 @@ not necessary as they are usually the same as the root node.
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar", "simple-bus";
-			reg = <24000 1000>;
-			mac-address = [ 00 E0 0C 00 73 00 ];
-			interrupts = <d 3 e 3 12 3>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452000>;
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			phy-handle = <&phy0>;
 			sleep = <&pmc 00000080>;
 			ranges;
 
 			mdio@24520 {
-				reg = <24520 20>;
+				reg = <0x24520 0x20>;
 				compatible = "fsl,gianfar-mdio";
 
-				ethernet-phy@0 {
-					linux,phandle = <2452000>
-					interrupt-parent = <40000>;
-					interrupts = <35 1>;
+				phy0: ethernet-phy@0 {
+					interrupts = <5 1>;
 					reg = <0>;
 					device_type = "ethernet-phy";
 				};
 
-				ethernet-phy@1 {
-					linux,phandle = <2452001>
-					interrupt-parent = <40000>;
-					interrupts = <35 1>;
+				phy1: ethernet-phy@1 {
+					interrupts = <5 1>;
 					reg = <1>;
 					device_type = "ethernet-phy";
 				};
 
-				ethernet-phy@3 {
-					linux,phandle = <2452002>
-					interrupt-parent = <40000>;
-					interrupts = <35 1>;
+				phy3: ethernet-phy@3 {
+					interrupts = <7 1>;
 					reg = <3>;
 					device_type = "ethernet-phy";
 				};
@@ -2565,30 +2554,24 @@ not necessary as they are usually the same as the root node.
 		};
 
 		ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
-			mac-address = [ 00 E0 0C 00 73 01 ];
-			interrupts = <13 3 14 3 18 3>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452001>;
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			phy-handle = <&phy1>;
 			sleep = <&pmc 00000040>;
 		};
 
 		ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			device_type = "network";
 			model = "FEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
-			mac-address = [ 00 E0 0C 00 73 02 ];
-			interrupts = <19 3>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452002>;
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 E0 0C 00 73 02 ];
+			interrupts = <41 2>;
+			phy-handle = <&phy3>;
 			sleep = <&pmc 00000020>;
 		};
 
@@ -2602,36 +2585,32 @@ not necessary as they are usually the same as the root node.
 			serial@4500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <4500 100>;
+				reg = <0x4500 0x100>;
 				clock-frequency = <0>;
-				interrupts = <1a 3>;
-				interrupt-parent = <40000>;
+				interrupts = <42 2>;
 			};
 
 			serial@4600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <4600 100>;
+				reg = <0x4600 0x100>;
 				clock-frequency = <0>;
-				interrupts = <1a 3>;
-				interrupt-parent = <40000>;
+				interrupts = <42 2>;
 			};
 		};
 
-		pic@40000 {
-			linux,phandle = <40000>;
+		pic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			reg = <40000 40000>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
 
 		i2c@3000 {
-			interrupt-parent = <40000>;
-			interrupts = <1b 3>;
-			reg = <3000 18>;
-			device_type = "i2c";
+			interrupts = <43 2>;
+			reg = <0x3000 0x100>;
 			compatible  = "fsl-i2c";
 			dfsrr;
 			sleep = <&pmc 00000004>;
@@ -2639,6 +2618,6 @@ not necessary as they are usually the same as the root node.
 
 		pmc: power@e0070 {
 			compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc";
-			reg = <e0070 20>;
+			reg = <0xe0070 0x20>;
 		};
 	};
-- 
cgit v1.2.3


From d49747bdfb2ddebea24d1580da55b79d093d48a9 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 9 Oct 2007 12:37:13 -0500
Subject: powerpc/mpc83xx: Power Management support

Basic PM support for 83xx.  Standby is implemented as sleep.
Suspend-to-RAM is implemented as "deep sleep" (with the processor
turned off) on 831x.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/Kconfig                      |   2 +-
 arch/powerpc/platforms/83xx/Makefile      |   1 +
 arch/powerpc/platforms/83xx/suspend-asm.S | 533 ++++++++++++++++++++++++++++++
 arch/powerpc/platforms/83xx/suspend.c     | 388 ++++++++++++++++++++++
 arch/powerpc/sysdev/fsl_soc.h             |   1 +
 arch/powerpc/sysdev/ipic.c                |  71 ++++
 include/asm-powerpc/reg.h                 |   4 +
 include/linux/fsl_devices.h               |   6 +
 8 files changed, 1005 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/platforms/83xx/suspend-asm.S
 create mode 100644 arch/powerpc/platforms/83xx/suspend.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index de88972c589..50be303e525 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -199,7 +199,7 @@ config ARCH_HIBERNATION_POSSIBLE
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
 
 config PPC_DCR_NATIVE
 	bool
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index f331fd7dd83..32c7ad13911 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -3,6 +3,7 @@
 #
 obj-y				:= misc.o usb.o
 obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S
new file mode 100644
index 00000000000..1930543c98d
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -0,0 +1,533 @@
+/*
+ * Enter and leave deep sleep state on MPC83xx
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+
+#define SS_MEMSAVE	0x00 /* First 8 bytes of RAM */
+#define SS_HID		0x08 /* 3 HIDs */
+#define SS_IABR		0x14 /* 2 IABRs */
+#define SS_IBCR		0x1c
+#define SS_DABR		0x20 /* 2 DABRs */
+#define SS_DBCR		0x28
+#define SS_SP		0x2c
+#define SS_SR		0x30 /* 16 segment registers */
+#define SS_R2		0x70
+#define SS_MSR		0x74
+#define SS_SDR1		0x78
+#define SS_LR		0x7c
+#define SS_SPRG		0x80 /* 4 SPRGs */
+#define SS_DBAT		0x90 /* 8 DBATs */
+#define SS_IBAT		0xd0 /* 8 IBATs */
+#define SS_TB		0x110
+#define SS_CR		0x118
+#define SS_GPREG	0x11c /* r12-r31 */
+#define STATE_SAVE_SIZE 0x16c
+
+	.section .data
+	.align	5
+
+mpc83xx_sleep_save_area:
+	.space	STATE_SAVE_SIZE
+immrbase:
+	.long	0
+
+	.section .text
+	.align	5
+
+	/* r3 = physical address of IMMR */
+_GLOBAL(mpc83xx_enter_deep_sleep)
+	lis	r4, immrbase@ha
+	stw	r3, immrbase@l(r4)
+
+	/* The first 2 words of memory are used to communicate with the
+	 * bootloader, to tell it how to resume.
+	 *
+	 * The first word is the magic number 0xf5153ae5, and the second
+	 * is the pointer to mpc83xx_deep_resume.
+	 *
+	 * The original content of these two words is saved in SS_MEMSAVE.
+	 */
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+
+	lis	r4, KERNELBASE@h
+	lwz	r5, 0(r4)
+	lwz	r6, 4(r4)
+
+	stw	r5, SS_MEMSAVE+0(r3)
+	stw	r6, SS_MEMSAVE+4(r3)
+
+	mfspr	r5, SPRN_HID0
+	mfspr	r6, SPRN_HID1
+	mfspr	r7, SPRN_HID2
+
+	stw	r5, SS_HID+0(r3)
+	stw	r6, SS_HID+4(r3)
+	stw	r7, SS_HID+8(r3)
+
+	mfspr	r4, SPRN_IABR
+	mfspr	r5, SPRN_IABR2
+	mfspr	r6, SPRN_IBCR
+	mfspr	r7, SPRN_DABR
+	mfspr	r8, SPRN_DABR2
+	mfspr	r9, SPRN_DBCR
+
+	stw	r4, SS_IABR+0(r3)
+	stw	r5, SS_IABR+4(r3)
+	stw	r6, SS_IBCR(r3)
+	stw	r7, SS_DABR+0(r3)
+	stw	r8, SS_DABR+4(r3)
+	stw	r9, SS_DBCR(r3)
+
+	mfspr	r4, SPRN_SPRG0
+	mfspr	r5, SPRN_SPRG1
+	mfspr	r6, SPRN_SPRG2
+	mfspr	r7, SPRN_SPRG3
+	mfsdr1	r8
+
+	stw	r4, SS_SPRG+0(r3)
+	stw	r5, SS_SPRG+4(r3)
+	stw	r6, SS_SPRG+8(r3)
+	stw	r7, SS_SPRG+12(r3)
+	stw	r8, SS_SDR1(r3)
+
+	mfspr	r4, SPRN_DBAT0U
+	mfspr	r5, SPRN_DBAT0L
+	mfspr	r6, SPRN_DBAT1U
+	mfspr	r7, SPRN_DBAT1L
+
+	stw	r4, SS_DBAT+0x00(r3)
+	stw	r5, SS_DBAT+0x04(r3)
+	stw	r6, SS_DBAT+0x08(r3)
+	stw	r7, SS_DBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_DBAT2U
+	mfspr	r5, SPRN_DBAT2L
+	mfspr	r6, SPRN_DBAT3U
+	mfspr	r7, SPRN_DBAT3L
+
+	stw	r4, SS_DBAT+0x10(r3)
+	stw	r5, SS_DBAT+0x14(r3)
+	stw	r6, SS_DBAT+0x18(r3)
+	stw	r7, SS_DBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_DBAT4U
+	mfspr	r5, SPRN_DBAT4L
+	mfspr	r6, SPRN_DBAT5U
+	mfspr	r7, SPRN_DBAT5L
+
+	stw	r4, SS_DBAT+0x20(r3)
+	stw	r5, SS_DBAT+0x24(r3)
+	stw	r6, SS_DBAT+0x28(r3)
+	stw	r7, SS_DBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_DBAT6U
+	mfspr	r5, SPRN_DBAT6L
+	mfspr	r6, SPRN_DBAT7U
+	mfspr	r7, SPRN_DBAT7L
+
+	stw	r4, SS_DBAT+0x30(r3)
+	stw	r5, SS_DBAT+0x34(r3)
+	stw	r6, SS_DBAT+0x38(r3)
+	stw	r7, SS_DBAT+0x3c(r3)
+
+	mfspr	r4, SPRN_IBAT0U
+	mfspr	r5, SPRN_IBAT0L
+	mfspr	r6, SPRN_IBAT1U
+	mfspr	r7, SPRN_IBAT1L
+
+	stw	r4, SS_IBAT+0x00(r3)
+	stw	r5, SS_IBAT+0x04(r3)
+	stw	r6, SS_IBAT+0x08(r3)
+	stw	r7, SS_IBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_IBAT2U
+	mfspr	r5, SPRN_IBAT2L
+	mfspr	r6, SPRN_IBAT3U
+	mfspr	r7, SPRN_IBAT3L
+
+	stw	r4, SS_IBAT+0x10(r3)
+	stw	r5, SS_IBAT+0x14(r3)
+	stw	r6, SS_IBAT+0x18(r3)
+	stw	r7, SS_IBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_IBAT4U
+	mfspr	r5, SPRN_IBAT4L
+	mfspr	r6, SPRN_IBAT5U
+	mfspr	r7, SPRN_IBAT5L
+
+	stw	r4, SS_IBAT+0x20(r3)
+	stw	r5, SS_IBAT+0x24(r3)
+	stw	r6, SS_IBAT+0x28(r3)
+	stw	r7, SS_IBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_IBAT6U
+	mfspr	r5, SPRN_IBAT6L
+	mfspr	r6, SPRN_IBAT7U
+	mfspr	r7, SPRN_IBAT7L
+
+	stw	r4, SS_IBAT+0x30(r3)
+	stw	r5, SS_IBAT+0x34(r3)
+	stw	r6, SS_IBAT+0x38(r3)
+	stw	r7, SS_IBAT+0x3c(r3)
+
+	mfmsr	r4
+	mflr	r5
+	mfcr	r6
+
+	stw	r4, SS_MSR(r3)
+	stw	r5, SS_LR(r3)
+	stw	r6, SS_CR(r3)
+	stw	r1, SS_SP(r3)
+	stw	r2, SS_R2(r3)
+
+1:	mftbu	r4
+	mftb	r5
+	mftbu	r6
+	cmpw	r4, r6
+	bne	1b
+
+	stw	r4, SS_TB+0(r3)
+	stw	r5, SS_TB+4(r3)
+
+	stmw	r12, SS_GPREG(r3)
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	mfsrin	r5, r4
+	stwu	r5, 4(r6)
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	/* Disable machine checks and critical exceptions */
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~MSR_CE
+	rlwinm	r4, r4, 0, ~MSR_ME
+	mtmsr	r4
+	isync
+
+#define TMP_VIRT_IMMR		0xf0000000
+#define DEFAULT_IMMR_VALUE	0xff400000
+#define IMMRBAR_BASE		0x0000
+
+	lis	r4, immrbase@ha
+	lwz	r4, immrbase@l(r4)
+
+	/* Use DBAT0 to address the current IMMR space */
+
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT0L, r4
+	lis	r8, TMP_VIRT_IMMR@h
+	ori	r4, r8, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT0U, r4
+	isync
+
+	/* Use DBAT1 to address the original IMMR space */
+
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT1L, r4
+	lis	r9, (TMP_VIRT_IMMR + 0x01000000)@h
+	ori	r4, r9, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT1U, r4
+	isync
+
+	/* Use DBAT2 to address the beginning of RAM.  This isn't done
+	 * using the normal virtual mapping, because with page debugging
+	 * enabled it will be read-only.
+	 */
+
+	li	r4, 0x0002
+	mtspr	SPRN_DBAT2L, r4
+	lis	r4, KERNELBASE@h
+	ori	r4, r4, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT2U, r4
+	isync
+
+	/* Flush the cache with our BAT, as there will be TLB misses
+	 * otherwise if page debugging is enabled, and these misses
+	 * will disturb the PLRU algorithm.
+	 */
+
+	bl	__flush_disable_L1
+
+	/* Keep the i-cache enabled, so the hack below for low-boot
+	 * flash will work.
+	 */
+	mfspr	r3, SPRN_HID0
+	ori	r3, r3, HID0_ICE
+	mtspr	SPRN_HID0, r3
+	isync
+
+	lis	r6, 0xf515
+	ori	r6, r6, 0x3ae5
+
+	lis	r7, mpc83xx_deep_resume@h
+	ori	r7, r7, mpc83xx_deep_resume@l
+	tophys(r7, r7)
+
+	lis	r5, KERNELBASE@h
+	stw	r6, 0(r5)
+	stw	r7, 4(r5)
+
+	/* Reset BARs */
+
+	li	r4, 0
+	stw	r4, 0x0024(r8)
+	stw	r4, 0x002c(r8)
+	stw	r4, 0x0034(r8)
+	stw	r4, 0x003c(r8)
+	stw	r4, 0x0064(r8)
+	stw	r4, 0x006c(r8)
+
+	/* Rev 1 of the 8313 has problems with wakeup events that are
+	 * pending during the transition to deep sleep state (such as if
+	 * the PCI host sets the state to D3 and then D0 in rapid
+	 * succession).  This check shrinks the race window somewhat.
+	 *
+	 * See erratum PCI23, though the problem is not limited
+	 * to PCI.
+	 */
+
+	lwz	r3, 0x0b04(r8)
+	andi.	r3, r3, 1
+	bne-	mpc83xx_deep_resume
+
+	/* Move IMMR back to the default location, following the
+	 * procedure specified in the MPC8313 manual.
+	 */
+	lwz	r4, IMMRBAR_BASE(r8)
+	isync
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	stw	r4, IMMRBAR_BASE(r8)
+	lis	r4, KERNELBASE@h
+	lwz	r4, 0(r4)
+	isync
+	lwz	r4, IMMRBAR_BASE(r9)
+	mr	r8, r9
+	isync
+
+	/* Check the Reset Configuration Word to see whether flash needs
+	 * to be mapped at a low address or a high address.
+	 */
+
+	lwz	r4, 0x0904(r8)
+	andis.	r4, r4, 0x0400
+	li	r4, 0
+	beq	boot_low
+	lis	r4, 0xff80
+boot_low:
+	stw	r4, 0x0020(r8)
+	lis	r7, 0x8000
+	ori	r7, r7, 0x0016
+
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+	oris	r5, r5, HID0_SLEEP@h
+	mtspr	SPRN_HID0, r5
+	isync
+
+	mfmsr	r5
+	oris	r5, r5, MSR_POW@h
+
+	/* Enable the flash mapping at the appropriate address.  This
+	 * mapping will override the RAM mapping if booting low, so there's
+	 * no need to disable the latter.  This must be done inside the same
+	 * cache line as setting MSR_POW, so that no instruction fetches
+	 * from RAM happen after the flash mapping is turned on.
+	 */
+
+	.align	5
+	stw	r7, 0x0024(r8)
+	sync
+	isync
+	mtmsr	r5
+	isync
+1:	b	1b
+
+mpc83xx_deep_resume:
+	lis	r4, 1f@h
+	ori	r4, r4, 1f@l
+	tophys(r4, r4)
+	mtsrr0	r4
+
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~(MSR_IR | MSR_DR)
+	mtsrr1	r4
+
+	rfi
+
+1:	tlbia
+	bl	__inval_enable_L1
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+	tophys(r3, r3)
+
+	lwz	r5, SS_MEMSAVE+0(r3)
+	lwz	r6, SS_MEMSAVE+4(r3)
+
+	stw	r5, 0(0)
+	stw	r6, 4(0)
+
+	lwz	r5, SS_HID+0(r3)
+	lwz	r6, SS_HID+4(r3)
+	lwz	r7, SS_HID+8(r3)
+
+	mtspr	SPRN_HID0, r5
+	mtspr	SPRN_HID1, r6
+	mtspr	SPRN_HID2, r7
+
+	lwz	r4, SS_IABR+0(r3)
+	lwz	r5, SS_IABR+4(r3)
+	lwz	r6, SS_IBCR(r3)
+	lwz	r7, SS_DABR+0(r3)
+	lwz	r8, SS_DABR+4(r3)
+	lwz	r9, SS_DBCR(r3)
+
+	mtspr	SPRN_IABR, r4
+	mtspr	SPRN_IABR2, r5
+	mtspr	SPRN_IBCR, r6
+	mtspr	SPRN_DABR, r7
+	mtspr	SPRN_DABR2, r8
+	mtspr	SPRN_DBCR, r9
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	lwzu	r5, 4(r6)
+	mtsrin	r5, r4
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	lwz	r4, SS_DBAT+0x00(r3)
+	lwz	r5, SS_DBAT+0x04(r3)
+	lwz	r6, SS_DBAT+0x08(r3)
+	lwz	r7, SS_DBAT+0x0c(r3)
+
+	mtspr	SPRN_DBAT0U, r4
+	mtspr	SPRN_DBAT0L, r5
+	mtspr	SPRN_DBAT1U, r6
+	mtspr	SPRN_DBAT1L, r7
+
+	lwz	r4, SS_DBAT+0x10(r3)
+	lwz	r5, SS_DBAT+0x14(r3)
+	lwz	r6, SS_DBAT+0x18(r3)
+	lwz	r7, SS_DBAT+0x1c(r3)
+
+	mtspr	SPRN_DBAT2U, r4
+	mtspr	SPRN_DBAT2L, r5
+	mtspr	SPRN_DBAT3U, r6
+	mtspr	SPRN_DBAT3L, r7
+
+	lwz	r4, SS_DBAT+0x20(r3)
+	lwz	r5, SS_DBAT+0x24(r3)
+	lwz	r6, SS_DBAT+0x28(r3)
+	lwz	r7, SS_DBAT+0x2c(r3)
+
+	mtspr	SPRN_DBAT4U, r4
+	mtspr	SPRN_DBAT4L, r5
+	mtspr	SPRN_DBAT5U, r6
+	mtspr	SPRN_DBAT5L, r7
+
+	lwz	r4, SS_DBAT+0x30(r3)
+	lwz	r5, SS_DBAT+0x34(r3)
+	lwz	r6, SS_DBAT+0x38(r3)
+	lwz	r7, SS_DBAT+0x3c(r3)
+
+	mtspr	SPRN_DBAT6U, r4
+	mtspr	SPRN_DBAT6L, r5
+	mtspr	SPRN_DBAT7U, r6
+	mtspr	SPRN_DBAT7L, r7
+
+	lwz	r4, SS_IBAT+0x00(r3)
+	lwz	r5, SS_IBAT+0x04(r3)
+	lwz	r6, SS_IBAT+0x08(r3)
+	lwz	r7, SS_IBAT+0x0c(r3)
+
+	mtspr	SPRN_IBAT0U, r4
+	mtspr	SPRN_IBAT0L, r5
+	mtspr	SPRN_IBAT1U, r6
+	mtspr	SPRN_IBAT1L, r7
+
+	lwz	r4, SS_IBAT+0x10(r3)
+	lwz	r5, SS_IBAT+0x14(r3)
+	lwz	r6, SS_IBAT+0x18(r3)
+	lwz	r7, SS_IBAT+0x1c(r3)
+
+	mtspr	SPRN_IBAT2U, r4
+	mtspr	SPRN_IBAT2L, r5
+	mtspr	SPRN_IBAT3U, r6
+	mtspr	SPRN_IBAT3L, r7
+
+	lwz	r4, SS_IBAT+0x20(r3)
+	lwz	r5, SS_IBAT+0x24(r3)
+	lwz	r6, SS_IBAT+0x28(r3)
+	lwz	r7, SS_IBAT+0x2c(r3)
+
+	mtspr	SPRN_IBAT4U, r4
+	mtspr	SPRN_IBAT4L, r5
+	mtspr	SPRN_IBAT5U, r6
+	mtspr	SPRN_IBAT5L, r7
+
+	lwz	r4, SS_IBAT+0x30(r3)
+	lwz	r5, SS_IBAT+0x34(r3)
+	lwz	r6, SS_IBAT+0x38(r3)
+	lwz	r7, SS_IBAT+0x3c(r3)
+
+	mtspr	SPRN_IBAT6U, r4
+	mtspr	SPRN_IBAT6L, r5
+	mtspr	SPRN_IBAT7U, r6
+	mtspr	SPRN_IBAT7L, r7
+
+	lwz	r4, SS_SPRG+0(r3)
+	lwz	r5, SS_SPRG+4(r3)
+	lwz	r6, SS_SPRG+8(r3)
+	lwz	r7, SS_SPRG+12(r3)
+	lwz	r8, SS_SDR1(r3)
+
+	mtspr	SPRN_SPRG0, r4
+	mtspr	SPRN_SPRG1, r5
+	mtspr	SPRN_SPRG2, r6
+	mtspr	SPRN_SPRG3, r7
+	mtsdr1	r8
+
+	lwz	r4, SS_MSR(r3)
+	lwz	r5, SS_LR(r3)
+	lwz	r6, SS_CR(r3)
+	lwz	r1, SS_SP(r3)
+	lwz	r2, SS_R2(r3)
+
+	mtsrr1	r4
+	mtsrr0	r5
+	mtcr	r6
+
+	li	r4, 0
+	mtspr	SPRN_TBWL, r4
+
+	lwz	r4, SS_TB+0(r3)
+	lwz	r5, SS_TB+4(r3)
+
+	mtspr	SPRN_TBWU, r4
+	mtspr	SPRN_TBWL, r5
+
+	lmw	r12, SS_GPREG(r3)
+
+	/* Kick decrementer */
+	li	r0, 1
+	mtdec	r0
+
+	rfi
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
new file mode 100644
index 00000000000..08e65fc8b98
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -0,0 +1,388 @@
+/*
+ * MPC83xx suspend support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/suspend.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mpc6xx.h>
+
+#include <sysdev/fsl_soc.h>
+
+#define PMCCR1_NEXT_STATE       0x0C /* Next state for power management */
+#define PMCCR1_NEXT_STATE_SHIFT 2
+#define PMCCR1_CURR_STATE       0x03 /* Current state for power management*/
+#define IMMR_RCW_OFFSET         0x900
+#define RCW_PCI_HOST            0x80000000
+
+void mpc83xx_enter_deep_sleep(phys_addr_t immrbase);
+
+struct mpc83xx_pmc {
+	u32 config;
+#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */
+#define PMCCR_SLPEN 1 /* System low power enable */
+
+	u32 event;
+	u32 mask;
+/* All but PMCI are deep-sleep only */
+#define PMCER_GPIO   0x100
+#define PMCER_PCI    0x080
+#define PMCER_USB    0x040
+#define PMCER_ETSEC1 0x020
+#define PMCER_ETSEC2 0x010
+#define PMCER_TIMER  0x008
+#define PMCER_INT1   0x004
+#define PMCER_INT2   0x002
+#define PMCER_PMCI   0x001
+#define PMCER_ALL    0x1FF
+
+	/* deep-sleep only */
+	u32 config1;
+#define PMCCR1_USE_STATE  0x80000000
+#define PMCCR1_PME_EN     0x00000080
+#define PMCCR1_ASSERT_PME 0x00000040
+#define PMCCR1_POWER_OFF  0x00000020
+
+	/* deep-sleep only */
+	u32 config2;
+};
+
+struct mpc83xx_rcw {
+	u32 rcwlr;
+	u32 rcwhr;
+};
+
+struct mpc83xx_clock {
+	u32 spmr;
+	u32 occr;
+	u32 sccr;
+};
+
+struct pmc_type {
+	int has_deep_sleep;
+};
+
+static struct of_device *pmc_dev;
+static int has_deep_sleep, deep_sleeping;
+static int pmc_irq;
+static struct mpc83xx_pmc __iomem *pmc_regs;
+static struct mpc83xx_clock __iomem *clock_regs;
+static int is_pci_agent, wake_from_pci;
+static phys_addr_t immrbase;
+static int pci_pm_state;
+static DECLARE_WAIT_QUEUE_HEAD(agent_wq);
+
+int fsl_deep_sleep(void)
+{
+	return deep_sleeping;
+}
+
+static int mpc83xx_change_state(void)
+{
+	u32 curr_state;
+	u32 reg_cfg1 = in_be32(&pmc_regs->config1);
+
+	if (is_pci_agent) {
+		pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >>
+		               PMCCR1_NEXT_STATE_SHIFT;
+		curr_state = reg_cfg1 & PMCCR1_CURR_STATE;
+
+		if (curr_state != pci_pm_state) {
+			reg_cfg1 &= ~PMCCR1_CURR_STATE;
+			reg_cfg1 |= pci_pm_state;
+			out_be32(&pmc_regs->config1, reg_cfg1);
+
+			wake_up(&agent_wq);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
+{
+	u32 event = in_be32(&pmc_regs->event);
+	int ret = IRQ_NONE;
+
+	if (mpc83xx_change_state())
+		ret = IRQ_HANDLED;
+
+	if (event) {
+		out_be32(&pmc_regs->event, event);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int mpc83xx_suspend_enter(suspend_state_t state)
+{
+	int ret = -EAGAIN;
+
+	/* Don't go to sleep if there's a race where pci_pm_state changes
+	 * between the agent thread checking it and the PM code disabling
+	 * interrupts.
+	 */
+	if (wake_from_pci) {
+		if (pci_pm_state != (deep_sleeping ? 3 : 2))
+			goto out;
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_PME_EN);
+	}
+
+	/* Put the system into low-power mode and the RAM
+	 * into self-refresh mode once the core goes to
+	 * sleep.
+	 */
+
+	out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN);
+
+	/* If it has deep sleep (i.e. it's an 831x or compatible),
+	 * disable power to the core upon entering sleep mode.  This will
+	 * require going through the boot firmware upon a wakeup event.
+	 */
+
+	if (deep_sleeping) {
+		out_be32(&pmc_regs->mask, PMCER_ALL);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF);
+
+		enable_kernel_fp();
+
+		mpc83xx_enter_deep_sleep(immrbase);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
+
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+	} else {
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+		mpc6xx_enter_standby();
+	}
+
+	ret = 0;
+
+out:
+	out_be32(&pmc_regs->config1,
+	         in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN);
+
+	return ret;
+}
+
+static void mpc83xx_suspend_finish(void)
+{
+	deep_sleeping = 0;
+}
+
+static int mpc83xx_suspend_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM;
+}
+
+static int mpc83xx_suspend_begin(suspend_state_t state)
+{
+	switch (state) {
+		case PM_SUSPEND_STANDBY:
+			deep_sleeping = 0;
+			return 0;
+
+		case PM_SUSPEND_MEM:
+			if (has_deep_sleep)
+				deep_sleeping = 1;
+
+			return 0;
+
+		default:
+			return -EINVAL;
+	}
+}
+
+static int agent_thread_fn(void *data)
+{
+	while (1) {
+		wait_event_interruptible(agent_wq, pci_pm_state >= 2);
+		try_to_freeze();
+
+		if (signal_pending(current) || pci_pm_state < 2)
+			continue;
+
+		/* With a preemptible kernel (or SMP), this could race with
+		 * a userspace-driven suspend request.  It's probably best
+		 * to avoid mixing the two with such a configuration (or
+		 * else fix it by adding a mutex to state_store that we can
+		 * synchronize with).
+		 */
+
+		wake_from_pci = 1;
+
+		pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM :
+		                               PM_SUSPEND_STANDBY);
+
+		wake_from_pci = 0;
+	}
+
+	return 0;
+}
+
+static void mpc83xx_set_agent(void)
+{
+	out_be32(&pmc_regs->config1, PMCCR1_USE_STATE);
+	out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+	kthread_run(agent_thread_fn, NULL, "PCI power mgt");
+}
+
+static int mpc83xx_is_pci_agent(void)
+{
+	struct mpc83xx_rcw __iomem *rcw_regs;
+	int ret;
+
+	rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET,
+	                   sizeof(struct mpc83xx_rcw));
+
+	if (!rcw_regs)
+		return -ENOMEM;
+
+	ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST);
+
+	iounmap(rcw_regs);
+	return ret;
+}
+
+static struct platform_suspend_ops mpc83xx_suspend_ops = {
+	.valid = mpc83xx_suspend_valid,
+	.begin = mpc83xx_suspend_begin,
+	.enter = mpc83xx_suspend_enter,
+	.finish = mpc83xx_suspend_finish,
+};
+
+static int pmc_probe(struct of_device *ofdev,
+                     const struct of_device_id *match)
+{
+	struct device_node *np = ofdev->node;
+	struct resource res;
+	struct pmc_type *type = match->data;
+	int ret = 0;
+
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	has_deep_sleep = type->has_deep_sleep;
+	immrbase = get_immrbase();
+	pmc_dev = ofdev;
+
+	is_pci_agent = mpc83xx_is_pci_agent();
+	if (is_pci_agent < 0)
+		return is_pci_agent;
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return -ENODEV;
+
+	pmc_irq = irq_of_parse_and_map(np, 0);
+	if (pmc_irq != NO_IRQ) {
+		ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED,
+		                  "pmc", ofdev);
+
+		if (ret)
+			return -EBUSY;
+	}
+
+	pmc_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!pmc_regs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = of_address_to_resource(np, 1, &res);
+	if (ret) {
+		ret = -ENODEV;
+		goto out_pmc;
+	}
+
+	clock_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!clock_regs) {
+		ret = -ENOMEM;
+		goto out_pmc;
+	}
+
+	if (is_pci_agent)
+		mpc83xx_set_agent();
+
+	suspend_set_ops(&mpc83xx_suspend_ops);
+	return 0;
+
+out_pmc:
+	iounmap(pmc_regs);
+out:
+	if (pmc_irq != NO_IRQ)
+		free_irq(pmc_irq, ofdev);
+
+	return ret;
+}
+
+static int pmc_remove(struct of_device *ofdev)
+{
+	return -EPERM;
+};
+
+static struct pmc_type pmc_types[] = {
+	{
+		.has_deep_sleep = 1,
+	},
+	{
+		.has_deep_sleep = 0,
+	}
+};
+
+static struct of_device_id pmc_match[] = {
+	{
+		.compatible = "fsl,mpc8313-pmc",
+		.data = &pmc_types[0],
+	},
+	{
+		.compatible = "fsl,mpc8349-pmc",
+		.data = &pmc_types[1],
+	},
+	{}
+};
+
+static struct of_platform_driver pmc_driver = {
+	.name = "mpc83xx-pmc",
+	.match_table = pmc_match,
+	.probe = pmc_probe,
+	.remove = pmc_remove
+};
+
+static int pmc_init(void)
+{
+	return of_register_platform_driver(&pmc_driver);
+}
+
+module_init(pmc_init);
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 52c831fa188..02429988735 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -10,6 +10,7 @@ extern u32 get_baudrate(void);
 extern u32 fsl_get_sys_freq(void);
 
 struct spi_board_info;
+struct device_node;
 
 extern int fsl_spi_init(struct spi_board_info *board_infos,
 			unsigned int num_board_infos,
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index caba1c0be5a..88a983ece5c 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
+#include <linux/fsl_devices.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -889,8 +890,78 @@ unsigned int ipic_get_irq(void)
 	return irq_linear_revmap(primary_ipic->irqhost, irq);
 }
 
+#ifdef CONFIG_PM
+static struct {
+	u32 sicfr;
+	u32 siprr[2];
+	u32 simsr[2];
+	u32 sicnr;
+	u32 smprr[2];
+	u32 semsr;
+	u32 secnr;
+	u32 sermr;
+	u32 sercr;
+} ipic_saved_state;
+
+static int ipic_suspend(struct sys_device *sdev, pm_message_t state)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_saved_state.sicfr = ipic_read(ipic->regs, IPIC_SICFR);
+	ipic_saved_state.siprr[0] = ipic_read(ipic->regs, IPIC_SIPRR_A);
+	ipic_saved_state.siprr[1] = ipic_read(ipic->regs, IPIC_SIPRR_D);
+	ipic_saved_state.simsr[0] = ipic_read(ipic->regs, IPIC_SIMSR_H);
+	ipic_saved_state.simsr[1] = ipic_read(ipic->regs, IPIC_SIMSR_L);
+	ipic_saved_state.sicnr = ipic_read(ipic->regs, IPIC_SICNR);
+	ipic_saved_state.smprr[0] = ipic_read(ipic->regs, IPIC_SMPRR_A);
+	ipic_saved_state.smprr[1] = ipic_read(ipic->regs, IPIC_SMPRR_B);
+	ipic_saved_state.semsr = ipic_read(ipic->regs, IPIC_SEMSR);
+	ipic_saved_state.secnr = ipic_read(ipic->regs, IPIC_SECNR);
+	ipic_saved_state.sermr = ipic_read(ipic->regs, IPIC_SERMR);
+	ipic_saved_state.sercr = ipic_read(ipic->regs, IPIC_SERCR);
+
+	if (fsl_deep_sleep()) {
+		/* In deep sleep, make sure there can be no
+		 * pending interrupts, as this can cause
+		 * problems on 831x.
+		 */
+		ipic_write(ipic->regs, IPIC_SIMSR_H, 0);
+		ipic_write(ipic->regs, IPIC_SIMSR_L, 0);
+		ipic_write(ipic->regs, IPIC_SEMSR, 0);
+		ipic_write(ipic->regs, IPIC_SERMR, 0);
+	}
+
+	return 0;
+}
+
+static int ipic_resume(struct sys_device *sdev)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_write(ipic->regs, IPIC_SICFR, ipic_saved_state.sicfr);
+	ipic_write(ipic->regs, IPIC_SIPRR_A, ipic_saved_state.siprr[0]);
+	ipic_write(ipic->regs, IPIC_SIPRR_D, ipic_saved_state.siprr[1]);
+	ipic_write(ipic->regs, IPIC_SIMSR_H, ipic_saved_state.simsr[0]);
+	ipic_write(ipic->regs, IPIC_SIMSR_L, ipic_saved_state.simsr[1]);
+	ipic_write(ipic->regs, IPIC_SICNR, ipic_saved_state.sicnr);
+	ipic_write(ipic->regs, IPIC_SMPRR_A, ipic_saved_state.smprr[0]);
+	ipic_write(ipic->regs, IPIC_SMPRR_B, ipic_saved_state.smprr[1]);
+	ipic_write(ipic->regs, IPIC_SEMSR, ipic_saved_state.semsr);
+	ipic_write(ipic->regs, IPIC_SECNR, ipic_saved_state.secnr);
+	ipic_write(ipic->regs, IPIC_SERMR, ipic_saved_state.sermr);
+	ipic_write(ipic->regs, IPIC_SERCR, ipic_saved_state.sercr);
+
+	return 0;
+}
+#else
+#define ipic_suspend NULL
+#define ipic_resume NULL
+#endif
+
 static struct sysdev_class ipic_sysclass = {
 	.name = "ipic",
+	.suspend = ipic_suspend,
+	.resume = ipic_resume,
 };
 
 static struct sys_device device_ipic = {
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index bbccadfee0d..c6d1ab65077 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -155,10 +155,12 @@
 #define   CTRL_RUNLATCH	0x1
 #define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
 #define   DABR_TRANSLATION	(1UL << 2)
+#define SPRN_DABR2	0x13D	/* e300 */
 #define SPRN_DABRX	0x3F7	/* Data Address Breakpoint Register Extension */
 #define   DABRX_USER	(1UL << 0)
 #define   DABRX_KERNEL	(1UL << 1)
 #define SPRN_DAR	0x013	/* Data Address Register */
+#define SPRN_DBCR	0x136	/* e300 Data Breakpoint Control Reg */
 #define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
 #define   DSISR_NOHPTE		0x40000000	/* no translation found */
 #define   DSISR_PROTFAULT	0x08000000	/* protection fault */
@@ -264,6 +266,8 @@
 #define HID1_PS		(1<<16)		/* 750FX PLL selection */
 #define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
 #define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
+#define SPRN_IABR2	0x3FA		/* 83xx */
+#define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */
 #define SPRN_HID4	0x3F4		/* 970 HID4 */
 #define SPRN_HID5	0x3F6		/* 970 HID5 */
 #define SPRN_HID6	0x3F9	/* BE HID 6 */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index c415a496de3..0472877d7ea 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -125,4 +125,10 @@ struct mpc8xx_pcmcia_ops {
 	int(*voltage_set)(int slot, int vcc, int vpp);
 };
 
+/* Returns non-zero if the current suspend operation would
+ * lead to a deep sleep (i.e. power removed from the core,
+ * instead of just the clock).
+ */
+int fsl_deep_sleep(void);
+
 #endif /* _FSL_DEVICE_H_ */
-- 
cgit v1.2.3


From 574366128db29e7da609ec1f9c01bf9d80adec87 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Fri, 11 Jul 2008 17:55:25 -0500
Subject: powerpc/mpc8313erdb: Add power management to the device tree.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8313erdb.dts | 241 ++++++++++++++++++++++++----------
 1 file changed, 171 insertions(+), 70 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 3664fb58402..2a94ae0dc8b 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -109,18 +109,38 @@
 			reg = <0x200 0x100>;
 		};
 
-		i2c@3000 {
+		sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x03000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			crypto@30000 {
+				compatible = "fsl,sec2.2", "fsl,sec2.1",
+				             "fsl,sec2.0";
+				reg = <0x30000 0x10000>;
+				interrupts = <11 0x8>;
+				interrupt-parent = <&ipic>;
+				fsl,num-channels = <1>;
+				fsl,channel-fifo-len = <24>;
+				fsl,exec-units-mask = <0x4c>;
+				fsl,descriptor-types-mask = <0x0122003f>;
 			};
 		};
 
@@ -188,37 +208,44 @@
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
 			phy_type = "utmi_wide";
+			sleep = <&pmc 0x00300000>;
 		};
 
-		mdio@24520 {
+		enet0: ethernet@24000 {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&ipic>;
-				interrupts = <19 0x8>;
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-			phy4: ethernet-phy@4 {
-				interrupt-parent = <&ipic>;
-				interrupts = <20 0x8>;
-				reg = <0x4>;
-				device_type = "ethernet-phy";
-			};
-		};
+			#size-cells = <1>;
+			sleep = <&pmc 0x20000000>;
+			ranges;
 
-		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
-			compatible = "gianfar";
+			compatible = "gianfar", "simple-bus";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 0x8 36 0x8 35 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = < &phy1 >;
+			fsl,magic-packet;
+
+			mdio@24520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x24520 0x20>;
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <19 0x8>;
+					reg = <0x1>;
+					device_type = "ethernet-phy";
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&ipic>;
+					interrupts = <20 0x8>;
+					reg = <0x4>;
+					device_type = "ethernet-phy";
+				};
+			};
 		};
 
 		enet1: ethernet@25000 {
@@ -231,6 +258,8 @@
 			interrupts = <34 0x8 33 0x8 32 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = < &phy4 >;
+			sleep = <&pmc 0x10000000>;
+			fsl,magic-packet;
 		};
 
 		serial0: serial@4500 {
@@ -253,17 +282,6 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		crypto@30000 {
-			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <1>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x4c>;
-			fsl,descriptor-types-mask = <0x0122003f>;
-		};
-
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
@@ -277,36 +295,119 @@
 			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 8>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+			/* Remove this (or change to "okay") if you have
+			 * a REVA3 or later board, if you apply one of the
+			 * workarounds listed in section 8.5 of the board
+			 * manual, or if you are adapting this device tree
+			 * to a different board.
+			 */
+			status = "fail";
+		};
+
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 8 79 8 85 8 73 8>;
+			interrupt-parent = <&ipic>;
+		};
 	};
 
-	pci0: pci@e0008500 {
-		cell-index = <1>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x0E -mini PCI */
-				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
-				/* IDSEL 0x0F - PCI slot */
-				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
+	sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00010000>;
+		ranges;
+
+		pci0: pci@e0008500 {
+			cell-index = <1>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+					/* IDSEL 0x0E -mini PCI */
+					 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+					/* IDSEL 0x0F - PCI slot */
+					 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <66 0x8>;
+			bus-range = <0x0 0x0>;
+			ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+				  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+				  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+			clock-frequency = <66666666>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <0xe0008500 0x100>;
+			compatible = "fsl,mpc8349-pci";
+			device_type = "pci";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0xe00082a8 4>;
+			ranges = <0 0xe0008100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <0>;
+			};
+
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x80 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <1>;
+			};
+
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x100 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <2>;
+			};
+
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <3>;
+			};
+		};
 	};
 };
-- 
cgit v1.2.3


From 36aa7965d85270065f090b01db5c62bf75e65f30 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Thu, 10 Jul 2008 16:21:35 -0400
Subject: powerpc/mpc7448: add alias list to DTS, clean out old chosen node

The mpc7448hpc2 board doesn't have an alias block like
most of the other modern eval boards have.  We need this
block in order to have u-boot be able to make use of the
CONFIG_OF_STDOUT_VIA_ALIAS (vs. having a hard coded node)
in the future.

Also remove the old, redundant chosen node.  Of all the modern
Freescale eval boards (incl. 83xx, 85xx, 86xx) this is the only
one which still has it.  Its presence also breaks with some older
versions of u-boot, like 1.3.1 -- which try and insert a
second chosen node.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc7448hpc2.dts | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 705c23c14f3..2544f3ecd6e 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -18,6 +18,16 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells =<0>;
@@ -78,7 +88,7 @@
 
 		};
 
-		ethernet@6200 {
+		enet0: ethernet@6200 {
 			linux,network-index = <0>;
 			#size-cells = <0>;
 			device_type = "network";
@@ -91,7 +101,7 @@
 			phy-handle = <&phy8>;
 		};
 
-		ethernet@6600 {
+		enet1: ethernet@6600 {
 			linux,network-index = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -105,7 +115,7 @@
 			phy-handle = <&phy9>;
 		};
 
-		serial@7808 {
+		serial0: serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x7808 0x200>;
@@ -114,7 +124,7 @@
 			interrupt-parent = <&mpic>;
 		};
 
-		serial@7c08 {
+		serial1: serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x7c08 0x200>;
@@ -131,7 +141,7 @@
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
-		pci@1000 {
+		pci0: pci@1000 {
 			compatible = "tsi108-pci";
 			device_type = "pci";
 			#interrupt-cells = <1>;
@@ -184,8 +194,4 @@
 			};
 		};
 	};
-	chosen {
-		linux,stdout-path = "/tsi108@c0000000/serial@7808";
-	};
-
 };
-- 
cgit v1.2.3


From b500563b22ea2a78760b2ccaa328426b0388e2ee Mon Sep 17 00:00:00 2001
From: John Rigby <jrigby@freescale.com>
Date: Thu, 26 Jun 2008 11:07:56 -0600
Subject: powerpc: pci config cleanup

Choosing PCI or not at config time is allowed on some
platforms via an if expression in arch/powerpc/Kconfig.
To add a new platform with PCI support selectable at
config time, you must change the if expression.  This
patch makes this easier by changing:
    bool "PCI support" if <long expression>
to
    bool "PCI support" if PPC_PCI_CHOICE
and adding select PPC_PCI_CHOICE to all the config nodes that
were previously in the PCI if expression.

Platforms with unconditional PCI support continue to
just select PCI in their config nodes.

Signed-off-by: John Rigby <jrigby@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/Kconfig                   | 12 ++++++++----
 arch/powerpc/platforms/52xx/Kconfig    |  1 +
 arch/powerpc/platforms/83xx/Kconfig    |  1 +
 arch/powerpc/platforms/85xx/Kconfig    |  2 +-
 arch/powerpc/platforms/86xx/Kconfig    |  2 ++
 arch/powerpc/platforms/Kconfig         |  1 +
 arch/powerpc/platforms/Kconfig.cputype |  2 ++
 arch/powerpc/platforms/iseries/Kconfig |  1 +
 arch/powerpc/platforms/ps3/Kconfig     |  1 +
 arch/powerpc/platforms/pseries/Kconfig |  1 +
 10 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 50be303e525..4c22242b396 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -568,11 +568,15 @@ config FSL_GTM
 config MCA
 	bool
 
+# Platforms that what PCI turned unconditionally just do select PCI
+# in their config node.  Platforms that want to choose at config
+# time should select PPC_PCI_CHOICE
+config PPC_PCI_CHOICE
+	bool
+
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
-		|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
-		|| PPC_PS3 || 44x
-	default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \
+	bool "PCI support" if PPC_PCI_CHOICE
+	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
 		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index acd2fc8cf49..d664b1bce38 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -3,6 +3,7 @@ config PPC_MPC52xx
 	depends on PPC_MULTIPLATFORM && PPC32
 	select FSL_SOC
 	select PPC_CLOCK
+	select PPC_PCI_CHOICE
 
 config PPC_MPC5200_SIMPLE
 	bool "Generic support for simple MPC5200 based boards"
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 27d9bf86de0..a95298810c1 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -2,6 +2,7 @@ menuconfig PPC_83xx
 	bool "83xx-based boards"
 	depends on 6xx && PPC_MULTIPLATFORM
 	select PPC_UDBG_16550
+	select PPC_PCI_CHOICE
 	select PPC_INDIRECT_PCI
 	select FSL_SOC
 	select IPIC
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index cebea5cadbc..cccc85a6504 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -2,8 +2,8 @@ menuconfig MPC85xx
 	bool "Machine Type"
 	depends on PPC_85xx
 	select PPC_UDBG_16550
-	select PPC_INDIRECT_PCI if PCI
 	select MPIC
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 80a81e02bb5..8ce10b233cd 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -34,6 +34,7 @@ endif
 
 config MPC8641
 	bool
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
@@ -41,6 +42,7 @@ config MPC8641
 
 config MPC8610
 	bool
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 690c1f46e69..efe5805eecb 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -253,6 +253,7 @@ config CPM2
 	depends on MPC85xx || 8260
 	select CPM
 	select PPC_LIB_RHEAP
+	select PPC_PCI_CHOICE
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 5bc4b611ff8..90e57e12313 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -42,12 +42,14 @@ config 40x
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config E200
 	bool "Freescale e200"
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 761d9e971fc..ea3e541ac74 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -2,6 +2,7 @@ config PPC_ISERIES
 	bool "IBM Legacy iSeries"
 	depends on PPC_MULTIPLATFORM && PPC64
 	select PPC_INDIRECT_IO
+	select PPC_PCI_CHOICE if EMBEDDED
 
 menu "iSeries device drivers"
 	depends on PPC_ISERIES
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index a5f4e95dfc3..920cf7a454b 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -8,6 +8,7 @@ config PPC_PS3
 	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select MEMORY_HOTPLUG
+	select PPC_PCI_CHOICE
 	help
 	  This option enables support for the Sony PS3 game console
 	  and other platforms using the PS3 hypervisor.  Enabling this
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 07fe5b69b9e..757c0296e0b 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -7,6 +7,7 @@ config PPC_PSERIES
 	select RTAS_ERROR_LOGGING
 	select PPC_UDBG_16550
 	select PPC_NATIVE
+	select PPC_PCI_CHOICE if EMBEDDED
 	default y
 
 config PPC_SPLPAR
-- 
cgit v1.2.3


From 76fe1ffce94067fc82d1d958f826eb9f1df53910 Mon Sep 17 00:00:00 2001
From: John Rigby <jrigby@freescale.com>
Date: Thu, 26 Jun 2008 11:07:57 -0600
Subject: powerpc: Move mpc83xx_add_bridge to fsl_pci.c

This allows other platforms with the same pci block like MPC5121 to use it.

Signed-off-by: John Rigby <jrigby@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/83xx/Kconfig       |  2 +-
 arch/powerpc/platforms/83xx/Makefile      |  1 -
 arch/powerpc/platforms/83xx/mpc831x_rdb.c |  1 +
 arch/powerpc/platforms/83xx/mpc832x_mds.c |  1 +
 arch/powerpc/platforms/83xx/mpc832x_rdb.c |  1 +
 arch/powerpc/platforms/83xx/mpc834x_itx.c |  1 +
 arch/powerpc/platforms/83xx/mpc834x_mds.c |  1 +
 arch/powerpc/platforms/83xx/mpc836x_mds.c |  1 +
 arch/powerpc/platforms/83xx/mpc836x_rdk.c |  1 +
 arch/powerpc/platforms/83xx/mpc837x_mds.c |  1 +
 arch/powerpc/platforms/83xx/mpc837x_rdb.c |  1 +
 arch/powerpc/platforms/83xx/mpc83xx.h     |  1 -
 arch/powerpc/platforms/83xx/pci.c         | 91 -------------------------------
 arch/powerpc/platforms/83xx/sbc834x.c     |  1 +
 arch/powerpc/sysdev/fsl_pci.c             | 61 +++++++++++++++++++++
 arch/powerpc/sysdev/fsl_pci.h             |  1 +
 16 files changed, 73 insertions(+), 94 deletions(-)
 delete mode 100644 arch/powerpc/platforms/83xx/pci.c

diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index a95298810c1..6159c5d4e5f 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -3,7 +3,7 @@ menuconfig PPC_83xx
 	depends on 6xx && PPC_MULTIPLATFORM
 	select PPC_UDBG_16550
 	select PPC_PCI_CHOICE
-	select PPC_INDIRECT_PCI
+	select FSL_PCI if PCI
 	select FSL_SOC
 	select IPIC
 
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 32c7ad13911..ba5028e2989 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -2,7 +2,6 @@
 # Makefile for the PowerPC 83xx linux kernel.
 #
 obj-y				:= misc.o usb.o
-obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index c4db5172b27..a428f8d1ac8 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -19,6 +19,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 6dbc6eabcb0..dd4be4aee31 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -36,6 +36,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index e7f706b624f..f049d692d4c 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -27,6 +27,7 @@
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 50e8f632061..7301d77a08e 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 2b8a0a3f855..30d509aa9f0 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index c2e5de60c05..75b80e83657 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -42,6 +42,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index c10dec4bf17..a5273bb28e1 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -23,6 +23,7 @@
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 64d17b0d645..be62de23bea 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -19,6 +19,7 @@
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <asm/prom.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index c00356bdb1d..da030afa2e2 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -17,6 +17,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 88a3b5cabb1..393dfecdbf5 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -55,7 +55,6 @@
  * mpc83xx_* files. Mostly for use by mpc83xx_setup
  */
 
-extern int mpc83xx_add_bridge(struct device_node *dev);
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
 extern int mpc834x_usb_cfg(void);
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
deleted file mode 100644
index 14f1080c6c9..00000000000
--- a/arch/powerpc/platforms/83xx/pci.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * FSL SoC setup code
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-int __init mpc83xx_add_bridge(struct device_node *dev)
-{
-	int len;
-	struct pci_controller *hose;
-	struct resource rsrc;
-	const int *bus_range;
-	int primary = 1, has_address = 0;
-	phys_addr_t immr = get_immrbase();
-
-	DBG("Adding PCI host bridge %s\n", dev->full_name);
-
-	/* Fetch host bridge registers address */
-	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
-
-	/* Get bus range if any */
-	bus_range = of_get_property(dev, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, assume"
-		       " bus 0\n", dev->full_name);
-	}
-
-	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
-	hose = pcibios_alloc_controller(dev);
-	if (!hose)
-		return -ENOMEM;
-
-	hose->first_busno = bus_range ? bus_range[0] : 0;
-	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-	/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
-	 * the other at 0x8600, we consider the 0x8500 the primary controller
-	 */
-	/* PCI 1 */
-	if ((rsrc.start & 0xfffff) == 0x8500) {
-		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
-	}
-	/* PCI 2 */
-	if ((rsrc.start & 0xfffff) == 0x8600) {
-		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
-		primary = 0;
-	}
-
-	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
-	       "Firmware bus number: %d->%d\n",
-	       (unsigned long long)rsrc.start, hose->first_busno,
-	       hose->last_busno);
-
-	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-	    hose, hose->cfg_addr, hose->cfg_data);
-
-	/* Interpret the "ranges" property */
-	/* This also maps the I/O region and sets isa_io/mem_base */
-	pci_process_bridge_OF_ranges(hose, dev, primary);
-
-	return 0;
-}
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index cf382474a83..fc21f5c15ba 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -37,6 +37,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 87b0aa13ab4..61e6d77efa4 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -27,6 +27,7 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
 /* atmu setup for fsl pci/pcie controller */
 void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
 {
@@ -248,3 +249,63 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+
+#if defined(CONFIG_PPC_83xx)
+int __init mpc83xx_add_bridge(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+	struct resource rsrc;
+	const int *bus_range;
+	int primary = 1, has_address = 0;
+	phys_addr_t immr = get_immrbase();
+
+	pr_debug("Adding PCI host bridge %s\n", dev->full_name);
+
+	/* Fetch host bridge registers address */
+	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+	/* Get bus range if any */
+	bus_range = of_get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
+	}
+
+	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+	hose = pcibios_alloc_controller(dev);
+	if (!hose)
+		return -ENOMEM;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
+	 * the other at 0x8600, we consider the 0x8500 the primary controller
+	 */
+	/* PCI 1 */
+	if ((rsrc.start & 0xfffff) == 0x8500) {
+		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
+	}
+	/* PCI 2 */
+	if ((rsrc.start & 0xfffff) == 0x8600) {
+		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
+		primary = 0;
+	}
+
+	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
+	       "Firmware bus number: %d->%d\n",
+	       (unsigned long long)rsrc.start, hose->first_busno,
+	       hose->last_busno);
+
+	pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+	    hose, hose->cfg_addr, hose->cfg_data);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+
+	return 0;
+}
+#endif /* CONFIG_PPC_83xx */
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index 37b04ad2657..13f30c2a61e 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -83,6 +83,7 @@ struct ccsr_pci {
 
 extern int fsl_add_bridge(struct device_node *dev, int is_primary);
 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
+extern int mpc83xx_add_bridge(struct device_node *dev);
 
 #endif /* __POWERPC_FSL_PCI_H */
 #endif /* __KERNEL__ */
-- 
cgit v1.2.3


From c0a2015965d42f58d3b50c59bd139bc2419bc7f9 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Tue, 8 Jul 2008 21:36:32 +0400
Subject: powerpc/83xx: fix ULPI setup for MPC8315 processors

We must not use MPC831X_SICR[HL]_* definitions for the MPC8315 processors,
because SICR USB bits locations are not compatible with MPC8313.

This patch fixes ULPI workability on MPC8315E-RDB boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/83xx/mpc83xx.h |  4 ++++
 arch/powerpc/platforms/83xx/usb.c     | 24 +++++++++++++++---------
 2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 393dfecdbf5..2a7cbabb410 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -26,6 +26,8 @@
 #define MPC834X_SICRL_USB1         0x20000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
+#define MPC8315_SICRL_USB_MASK     0x000000fc
+#define MPC8315_SICRL_USB_ULPI     0x00000054
 #define MPC837X_SICRL_USB_MASK     0xf0000000
 #define MPC837X_SICRL_USB_ULPI     0x50000000
 
@@ -34,6 +36,8 @@
 #define MPC834X_SICRH_USB_UTMI     0x00020000
 #define MPC831X_SICRH_USB_MASK     0x000000e0
 #define MPC831X_SICRH_USB_ULPI     0x000000a0
+#define MPC8315_SICRH_USB_MASK     0x0000ff00
+#define MPC8315_SICRH_USB_ULPI     0x00000000
 
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 64bcf0a33c7..cc99c280aad 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -137,15 +137,21 @@ int mpc831x_usb_cfg(void)
 
 	/* Configure pin mux for ULPI.  There is no pin mux for UTMI */
 	if (prop && !strcmp(prop, "ulpi")) {
-		temp = in_be32(immap + MPC83XX_SICRL_OFFS);
-		temp &= ~MPC831X_SICRL_USB_MASK;
-		temp |= MPC831X_SICRL_USB_ULPI;
-		out_be32(immap + MPC83XX_SICRL_OFFS, temp);
-
-		temp = in_be32(immap + MPC83XX_SICRH_OFFS);
-		temp &= ~MPC831X_SICRH_USB_MASK;
-		temp |= MPC831X_SICRH_USB_ULPI;
-		out_be32(immap + MPC83XX_SICRH_OFFS, temp);
+		if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC8315_SICRL_USB_MASK,
+					MPC8315_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC8315_SICRH_USB_MASK,
+					MPC8315_SICRH_USB_ULPI);
+		} else {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC831X_SICRL_USB_MASK,
+					MPC831X_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC831X_SICRH_USB_MASK,
+					MPC831X_SICRH_USB_ULPI);
+		}
 	}
 
 	iounmap(immap);
-- 
cgit v1.2.3


From 69ad7e73dee33f8e0680825006c801ca6b4bf470 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Tue, 8 Jul 2008 21:36:40 +0400
Subject: powerpc/fsl_soc: gianfar: don't probe disabled devices

Freescale ships MPC8315E-RDB boards in two variants:

1. With TSEC1 ethernet support and USB UTMI PHY;
2. Without TSEC1 support, but with USB ULPI PHY in addition.

For the second case U-Boot will add status = "disabled"; property
into the TSEC1 node, so Linux should not try to probe it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_soc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index ebcec7362f9..ca180a93bca 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -296,6 +296,9 @@ static int __init gfar_of_init(void)
 		const phandle *ph;
 		int n_res = 2;
 
+		if (!of_device_is_available(np))
+			continue;
+
 		memset(r, 0, sizeof(r));
 		memset(&gfar_data, 0, sizeof(gfar_data));
 
-- 
cgit v1.2.3


From 89ae5b2b9357cd715ab25df50e5fa56ae30aaf80 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 4 Jul 2008 20:53:28 +0400
Subject: powerpc: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings

This patch adds few bindings for the new drivers to be submitted through
the appropriate maintainers.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 .../powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt     | 53 ++++++++++++++--------
 .../powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt  | 17 +++++++
 .../powerpc/dts-bindings/fsl/upm-nand.txt          | 28 ++++++++++++
 Documentation/powerpc/dts-bindings/gpio/led.txt    | 15 ++++++
 4 files changed, 94 insertions(+), 19 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/upm-nand.txt
 create mode 100644 Documentation/powerpc/dts-bindings/gpio/led.txt

diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt
index c8f44d6bcbc..9ccd5f30405 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt
@@ -1,22 +1,37 @@
-* USB (Universal Serial Bus Controller)
+Freescale QUICC Engine USB Controller
 
 Required properties:
-- compatible : could be "qe_udc" or "fhci-hcd".
-- mode : the could be "host" or "slave".
-- reg : Offset and length of the register set for the device
-- interrupts : <a b> where a is the interrupt number and b is a
-  field that represents an encoding of the sense and level
-  information for the interrupt.  This should be encoded based on
-  the information in section 2) depending on the type of interrupt
-  controller you have.
-- interrupt-parent : the phandle for the interrupt controller that
-  services interrupts for this device.
+- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
+- reg : the first two cells should contain usb registers location and
+  length, the next two two cells should contain PRAM location and
+  length.
+- interrupts : should contain USB interrupt.
+- interrupt-parent : interrupt source phandle.
+- fsl,fullspeed-clock : specifies the full speed USB clock source:
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- fsl,lowspeed-clock : specifies the low speed USB clock source:
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- hub-power-budget : USB power budget for the root hub, in mA.
+- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP,
+  USBRN, SPEED (optional), and POWER (optional).
 
-Example(slave):
-	usb@6c0 {
-		compatible = "qe_udc";
-		reg = <6c0 40>;
-		interrupts = <8b 0>;
-		interrupt-parent = <700>;
-		mode = "slave";
-	};
+Example:
+
+usb@6c0 {
+	compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb";
+	reg = <0x6c0 0x40 0x8b00 0x100>;
+	interrupts = <11>;
+	interrupt-parent = <&qeic>;
+	fsl,fullspeed-clock = "clk21";
+	gpios = <&qe_pio_b  2 0 /* USBOE */
+		 &qe_pio_b  3 0 /* USBTP */
+		 &qe_pio_b  8 0 /* USBTN */
+		 &qe_pio_b  9 0 /* USBRP */
+		 &qe_pio_b 11 0 /* USBRN */
+		 &qe_pio_e 20 0 /* SPEED */
+		 &qe_pio_e 21 0 /* POWER */>;
+};
diff --git a/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt b/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt
new file mode 100644
index 00000000000..0f766333b6e
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt
@@ -0,0 +1,17 @@
+Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU)
+
+Required properties:
+- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx".
+- reg : should specify I2C address (0x0a).
+- #gpio-cells : should be 2.
+- gpio-controller : should be present.
+
+Example:
+
+mcu@0a {
+	#gpio-cells = <2>;
+	compatible = "fsl,mc9s08qg8-mpc8349emitx",
+		     "fsl,mcu-mpc8349emitx";
+	reg = <0x0a>;
+	gpio-controller;
+};
diff --git a/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt
new file mode 100644
index 00000000000..84a04d5eb8e
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt
@@ -0,0 +1,28 @@
+Freescale Localbus UPM programmed to work with NAND flash
+
+Required properties:
+- compatible : "fsl,upm-nand".
+- reg : should specify localbus chip select and size used for the chip.
+- fsl,upm-addr-offset : UPM pattern offset for the address latch.
+- fsl,upm-cmd-offset : UPM pattern offset for the command latch.
+- gpios : may specify optional GPIO connected to the Ready-Not-Busy pin.
+
+Example:
+
+upm@1,0 {
+	compatible = "fsl,upm-nand";
+	reg = <1 0 1>;
+	fsl,upm-addr-offset = <16>;
+	fsl,upm-cmd-offset = <8>;
+	gpios = <&qe_pio_e 18 0>;
+
+	flash {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "...";
+
+		partition@0 {
+			...
+		};
+	};
+};
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
new file mode 100644
index 00000000000..ff51f4c0fa9
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
@@ -0,0 +1,15 @@
+LED connected to GPIO
+
+Required properties:
+- compatible : should be "gpio-led".
+- label : (optional) the label for this LED. If omitted, the label is
+  taken from the node name (excluding the unit address).
+- gpios : should specify LED GPIO.
+
+Example:
+
+led@0 {
+	compatible = "gpio-led";
+	label = "hdd";
+	gpios = <&mcu_pio 0 1>;
+};
-- 
cgit v1.2.3


From ade254d7f05cb74ab0a951ab105bc9ae872f045e Mon Sep 17 00:00:00 2001
From: Jochen Friedrich <jochen@scram.de>
Date: Sat, 5 Jul 2008 13:29:28 +0200
Subject: powerpc: Add documentation for CPM GPIO banks

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 .../powerpc/dts-bindings/fsl/cpm_qe/gpio.txt       | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt

diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
new file mode 100644
index 00000000000..1815dfede1b
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
@@ -0,0 +1,38 @@
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+On CPM1 devices, all ports are using slightly different register layouts.
+Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
+
+On CPM2 devices, all ports are 32bit ports and use a common register layout.
+
+Required properties:
+- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
+  "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
+  "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional paramters (currently unused).
+- gpio-controller : Marks the port as GPIO controller.
+
+Example of three SOC GPIO banks defined as gpio-controller nodes:
+
+	CPM1_PIO_A: gpio-controller@950 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-a";
+		reg = <0x950 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_B: gpio-controller@ab8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-b";
+		reg = <0xab8 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_E: gpio-controller@ac8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-e";
+		reg = <0xac8 0x18>;
+		gpio-controller;
+	};
-- 
cgit v1.2.3


From 00c5372d37a78990c1530184a9c792ee60a30067 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 12 Jun 2008 03:04:02 +0400
Subject: powerpc/fsl_uli1575: fix RTC quirk to work on MPC8572DS and
 MPC8610HPCD

This patch fixes RTC on MPC8572DS boards: dummy read helps only when
reading at the end of the bridge's memory (i.e. outside of behind the
bridge devices' assigned regions).

With this change the quirk also makes RTC work on MPC8610HPCD, so it's
unlikely that this will break MPC8641HPCN or MPC8544DS boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/fsl_uli1575.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index afc9141be63..756561c5159 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -221,7 +221,7 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		if ((bus->resource[i]) &&
 			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			dummy = ioremap(bus->resource[i]->start, 0x4);
+			dummy = ioremap(bus->resource[i]->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
-- 
cgit v1.2.3


From 52ddd1cdc923802b224b15ba75000c6c5668227f Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 12 Jun 2008 03:04:17 +0400
Subject: powerpc/85xx/86xx: some refactoring for fsl_uli1575 code

- Get rid of uses_fsl_uli_m1575, it does not scale for all cases.
  Instead, let's explicitly use machine_is() for each fixup.
- Factor out MPC8610HPCD quirks to fsl_uli1575, and protect them with
  machine_is(). One step closer to multiplatform kernels.
- Actually use fsl_uli1575 on MPC8610HPCD, so RTC quirk will be applied.
- RTC quirk applies to all boards though, so no machine_is() checks.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   |   2 -
 arch/powerpc/platforms/86xx/Kconfig        |   1 +
 arch/powerpc/platforms/86xx/mpc8610_hpcd.c |  87 ----------------------
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |   2 -
 arch/powerpc/platforms/fsl_uli1575.c       | 115 +++++++++++++++++++++++++++--
 5 files changed, 108 insertions(+), 99 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 25f41cd2d33..00c53580664 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -115,7 +115,6 @@ void __init mpc85xx_ds_pic_init(void)
 
 #ifdef CONFIG_PCI
 static int primary_phb_addr;
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
 
@@ -161,7 +160,6 @@ static void __init mpc85xx_ds_setup_arch(void)
 		}
 	}
 
-	uses_fsl_uli_m1575 = 1;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 8ce10b233cd..9355a526943 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -27,6 +27,7 @@ config SBC8641D
 config MPC8610_HPCD
 	bool "Freescale MPC8610 HPCD"
 	select DEFAULT_UIMAGE
+	select FSL_ULI1575
 	help
 	  This option enables support for the MPC8610 HPCD board.
 
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 30725302884..5eedb710896 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -58,93 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-#ifdef CONFIG_PCI
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-	u32 temp32;
-
-	/* Disable INTx */
-	pci_read_config_dword(dev, 0x48, &temp32);
-	pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
-
-	/* Enable sideband interrupt */
-	pci_read_config_dword(dev, 0x90, &temp32);
-	pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
-{
-	unsigned char c;
-	unsigned short temp;
-
-	/* Interrupt Disable, Needed when SATA disabled */
-	pci_read_config_word(dev, PCI_COMMAND, &temp);
-	temp |= 1<<10;
-	pci_write_config_word(dev, PCI_COMMAND, temp);
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c |= 0x80;
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
-	pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0x83, c);
-}
-
-/*
- * Since 8259PIC was disabled on the board, the IDE device can not
- * use the legacy IRQ, we need to let the IDE device work under
- * native mode and use the interrupt line like other PCI devices.
- * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
- * as the interrupt for IDE device.
- */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-	unsigned char c;
-
-	pci_read_config_byte(dev, 0x4b, &c);
-	c |= 0x10;
-	pci_write_config_byte(dev, 0x4b, c);
-}
-
-/*
- * SATA interrupt pin bug fix
- * There's a chip bug for 5288, The interrupt pin should be 2,
- * not the read only value 1, So it use INTB#, not INTA# which
- * actually used by the IDE device 5229.
- * As of this bug, during the PCI initialization, 5288 read the
- * irq of IDE device from the device tree, this function fix this
- * bug by re-assigning a correct irq to 5288.
- *
- */
-static void __devinit final_uli5288(struct pci_dev *dev)
-{
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	struct device_node *hosenode = hose ? hose->dn : NULL;
-	struct of_irq oirq;
-	int virq, pin = 2;
-	u32 laddr[3];
-
-	if (!hosenode)
-		return;
-
-	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
-	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
-	dev->irq = virq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
-#endif /* CONFIG_PCI */
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
 static u32 get_busfreq(void)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 7916599c912..f712d9c0991 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -45,7 +45,6 @@
 #endif
 
 #ifdef CONFIG_PCI
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
 
@@ -87,7 +86,6 @@ mpc86xx_hpcn_setup_arch(void)
 			fsl_add_bridge(np, 0);
 	}
 
-	uses_fsl_uli_m1575 = 1;
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 
 #endif
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 756561c5159..ef74a0763ec 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = {
 	ULI_8259_NONE,		/* PIRQH */
 };
 
-/* set in board code if you want this quirks to do something */
-int uses_fsl_uli_m1575;
-
 /* Bridge */
 static void __devinit early_uli5249(struct pci_dev *dev)
 {
 	unsigned char temp;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
 	int i;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	/*
@@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
 	 * IRQ 14: Edge
 	 * IRQ 15: Edge
 	 */
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	outb(0xfa, 0x4d0);
@@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
 	unsigned char c;
 	unsigned int d;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	/* read/write lock */
@@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
 {
 	unsigned short temp;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
 
+static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
+{
+	u32 temp32;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	/* Disable INTx */
+	pci_read_config_dword(dev, 0x48, &temp32);
+	pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
+
+	/* Enable sideband interrupt */
+	pci_read_config_dword(dev, 0x90, &temp32);
+	pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
+}
+
+static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
+{
+	unsigned char c;
+	unsigned short temp;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	/* Interrupt Disable, Needed when SATA disabled */
+	pci_read_config_word(dev, PCI_COMMAND, &temp);
+	temp |= 1<<10;
+	pci_write_config_word(dev, PCI_COMMAND, temp);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c |= 0x80;
+	pci_write_config_byte(dev, 0x83, c);
+
+	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+	pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c &= 0x7f;
+	pci_write_config_byte(dev, 0x83, c);
+}
+
+/*
+ * Since 8259PIC was disabled on the board, the IDE device can not
+ * use the legacy IRQ, we need to let the IDE device work under
+ * native mode and use the interrupt line like other PCI devices.
+ * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
+ * as the interrupt for IDE device.
+ */
+static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev)
+{
+	unsigned char c;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	pci_read_config_byte(dev, 0x4b, &c);
+	c |= 0x10;
+	pci_write_config_byte(dev, 0x4b, c);
+}
+
+/*
+ * SATA interrupt pin bug fix
+ * There's a chip bug for 5288, The interrupt pin should be 2,
+ * not the read only value 1, So it use INTB#, not INTA# which
+ * actually used by the IDE device 5229.
+ * As of this bug, during the PCI initialization, 5288 read the
+ * irq of IDE device from the device tree, this function fix this
+ * bug by re-assigning a correct irq to 5288.
+ *
+ */
+static void __devinit hpcd_final_uli5288(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct device_node *hosenode = hose ? hose->dn : NULL;
+	struct of_irq oirq;
+	int virq, pin = 2;
+	u32 laddr[3];
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	if (!hosenode)
+		return;
+
+	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
+	laddr[1] = laddr[2] = 0;
+	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+				     oirq.size);
+	dev->irq = virq;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
+
 int uli_exclude_device(struct pci_controller *hose,
 			u_char bus, u_char devfn)
 {
-- 
cgit v1.2.3


From a47fda930777f2d84209c9d140557b983e84a16a Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 12 Jun 2008 03:04:37 +0400
Subject: powerpc/86xx: mpc8610_hpcd - add support for ULI RTC

The ULI "Super South Bridge" contains ISA bridge to the legacy
devices, such as Super IO mouse/keyboard/floppy disk controllers,
parallel port, i8259 interrupt controller and so on.

i8259 is disabled on the MPC8610HPCD, and other peripherals are not
traced out. So we use only RTC.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8610_hpcd.dts      |  14 ++++
 arch/powerpc/configs/mpc8610_hpcd_defconfig | 121 +++++++++++++++++++++++++---
 2 files changed, 122 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 981941e5d7a..666185f5945 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -388,6 +388,20 @@
 					  0x01000000 0x0 0x00000000
 					  0x01000000 0x0 0x00000000
 					  0x0 0x00100000>;
+
+				isa@1e {
+					device_type = "isa";
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0 0 0 0>;
+					ranges = <1 0 0x01000000 0 0
+						  0x00001000>;
+
+					rtc@70 {
+						compatible = "pnpPNP,b00";
+						reg = <1 0x70 2>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 5612d40d046..cdf98ae3682 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:50:24 2008
+# Linux kernel version: 2.6.26
+# Tue Jul 15 08:31:01 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,8 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -97,6 +99,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -117,7 +120,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -153,31 +156,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
 # CONFIG_PPC_MPC512x is not set
 # CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
 CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
+CONFIG_FSL_ULI1575=y
 
 #
 # Kernel options
@@ -202,6 +217,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -228,11 +244,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -469,6 +487,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -571,6 +590,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
@@ -639,6 +660,10 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -655,6 +680,8 @@ CONFIG_DUMMY=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -762,14 +789,16 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -787,9 +816,11 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_POWERMAC=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
@@ -826,6 +857,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -888,6 +920,9 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_OF is not set
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
 # CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
@@ -1027,11 +1062,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
 #
 # ALSA PowerMac devices
 #
+# CONFIG_SND_POWERMAC is not set
 
 #
 # ALSA PowerPC devices
 #
 
+#
+# Apple Onboard Audio driver
+#
+# CONFIG_SND_AOA is not set
+# CONFIG_SND_AOA_SOUNDBUS is not set
+
 #
 # System on Chip audio support
 #
@@ -1075,7 +1117,57 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -1295,8 +1387,11 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
-- 
cgit v1.2.3


From 4cd7e1cbd43bb67927af2b8b4e0ffd43fd5ed6b4 Mon Sep 17 00:00:00 2001
From: Andy Fleming <afleming@freescale.com>
Date: Fri, 2 May 2008 13:03:50 -0500
Subject: powerpc: Add support for multiple gfar mdio interfaces

The old code assumed there was only one, but the 8572 actually has 3.

Also, our usual id, 0xe0024520, gets resolved to -1 somewhere, and this was
preventing the multiple buses from having different ids.  So we only keep
the low 20 bits, which have the interesting info, anyway.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_soc.c | 84 ++++++++++++++++++++-----------------------
 1 file changed, 38 insertions(+), 46 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index ca180a93bca..ef4cb0d67a7 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -207,66 +207,58 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-static int __init gfar_mdio_of_init(void)
+static int gfar_mdio_of_init_one(struct device_node *np)
 {
-	struct device_node *np = NULL;
+	int k;
+	struct device_node *child = NULL;
+	struct gianfar_mdio_data mdio_data;
 	struct platform_device *mdio_dev;
 	struct resource res;
 	int ret;
 
-	np = of_find_compatible_node(np, NULL, "fsl,gianfar-mdio");
-
-	/* try the deprecated version */
-	if (!np)
-		np = of_find_compatible_node(np, "mdio", "gianfar");
+	memset(&res, 0, sizeof(res));
+	memset(&mdio_data, 0, sizeof(mdio_data));
 
-	if (np) {
-		int k;
-		struct device_node *child = NULL;
-		struct gianfar_mdio_data mdio_data;
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return ret;
 
-		memset(&res, 0, sizeof(res));
-		memset(&mdio_data, 0, sizeof(mdio_data));
+	mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
+			res.start&0xfffff, &res, 1);
+	if (IS_ERR(mdio_dev))
+		return PTR_ERR(mdio_dev);
 
-		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
-			goto err;
+	for (k = 0; k < 32; k++)
+		mdio_data.irq[k] = PHY_POLL;
 
-		mdio_dev =
-		    platform_device_register_simple("fsl-gianfar_mdio",
-						    res.start, &res, 1);
-		if (IS_ERR(mdio_dev)) {
-			ret = PTR_ERR(mdio_dev);
-			goto err;
+	while ((child = of_get_next_child(np, child)) != NULL) {
+		int irq = irq_of_parse_and_map(child, 0);
+		if (irq != NO_IRQ) {
+			const u32 *id = of_get_property(child, "reg", NULL);
+			mdio_data.irq[*id] = irq;
 		}
+	}
 
-		for (k = 0; k < 32; k++)
-			mdio_data.irq[k] = PHY_POLL;
+	ret = platform_device_add_data(mdio_dev, &mdio_data,
+				sizeof(struct gianfar_mdio_data));
+	if (ret)
+		platform_device_unregister(mdio_dev);
 
-		while ((child = of_get_next_child(np, child)) != NULL) {
-			int irq = irq_of_parse_and_map(child, 0);
-			if (irq != NO_IRQ) {
-				const u32 *id = of_get_property(child,
-							"reg", NULL);
-				mdio_data.irq[*id] = irq;
-			}
-		}
+	return ret;
+}
 
-		ret =
-		    platform_device_add_data(mdio_dev, &mdio_data,
-					     sizeof(struct gianfar_mdio_data));
-		if (ret)
-			goto unreg;
-	}
+static int __init gfar_mdio_of_init(void)
+{
+	struct device_node *np = NULL;
 
-	of_node_put(np);
-	return 0;
+	for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
+		gfar_mdio_of_init_one(np);
 
-unreg:
-	platform_device_unregister(mdio_dev);
-err:
-	of_node_put(np);
-	return ret;
+	/* try the deprecated version */
+	for_each_compatible_node(np, "mdio", "gianfar");
+		gfar_mdio_of_init_one(np);
+
+	return 0;
 }
 
 arch_initcall(gfar_mdio_of_init);
@@ -393,7 +385,7 @@ static int __init gfar_of_init(void)
 
 			gfar_data.phy_id = *id;
 			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
-				 (unsigned long long)res.start);
+				 (unsigned long long)res.start&0xfffff);
 
 			of_node_put(phy);
 			of_node_put(mdio);
-- 
cgit v1.2.3


From 7e1cc9c55a2a4af62f30fade62fb612a243def39 Mon Sep 17 00:00:00 2001
From: Andy Fleming <afleming@freescale.com>
Date: Wed, 7 May 2008 13:19:44 -0500
Subject: powerpc: Fix a bunch of sparse warnings in the qe_lib

Mostly having to do with not marking things __iomem.  And some failure
to use appropriate accessors to read MMIO regs.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/qe_lib/qe.c       |  6 +++---
 arch/powerpc/sysdev/qe_lib/ucc.c      |  6 +++---
 arch/powerpc/sysdev/qe_lib/ucc_fast.c | 16 ++++++++--------
 include/asm-powerpc/ucc_fast.h        |  8 ++++----
 4 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 9e82d7e725a..b3b73ae57d6 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -64,7 +64,7 @@ static phys_addr_t qebase = -1;
 phys_addr_t get_qe_base(void)
 {
 	struct device_node *qe;
-	unsigned int size;
+	int size;
 	const u32 *prop;
 
 	if (qebase != -1)
@@ -158,7 +158,7 @@ static unsigned int brg_clk = 0;
 unsigned int qe_get_brg_clk(void)
 {
 	struct device_node *qe;
-	unsigned int size;
+	int size;
 	const u32 *prop;
 
 	if (brg_clk)
@@ -305,7 +305,7 @@ EXPORT_SYMBOL(qe_put_snum);
 
 static int qe_sdma_init(void)
 {
-	struct sdma *sdma = &qe_immr->sdma;
+	struct sdma __iomem *sdma = &qe_immr->sdma;
 	unsigned long sdma_buf_offset;
 
 	if (!sdma)
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index d3c7f5af9bc..1d78071aad7 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -88,7 +88,7 @@ int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
 	return 0;
 }
 
-static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
 	unsigned int *reg_num, unsigned int *shift)
 {
 	unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
@@ -100,7 +100,7 @@ static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
 
 int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 {
-	__be32 *cmxucr;
+	__be32 __iomem *cmxucr;
 	unsigned int reg_num;
 	unsigned int shift;
 
@@ -121,7 +121,7 @@ int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
 	enum comm_dir mode)
 {
-	__be32 *cmxucr;
+	__be32 __iomem *cmxucr;
 	unsigned int reg_num;
 	unsigned int shift;
 	u32 clock_bits = 0;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index bcf88e6ce96..1aecb075a72 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -46,7 +46,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
 	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
 	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
 	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
@@ -68,7 +68,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
 	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
 }
 EXPORT_SYMBOL(ucc_fast_dump_regs);
 
@@ -96,7 +96,7 @@ EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
 
 void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 
 	uf_regs = uccf->uf_regs;
@@ -117,7 +117,7 @@ EXPORT_SYMBOL(ucc_fast_enable);
 
 void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 
 	uf_regs = uccf->uf_regs;
@@ -139,7 +139,7 @@ EXPORT_SYMBOL(ucc_fast_disable);
 int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
 {
 	struct ucc_fast_private *uccf;
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 	int ret;
 
@@ -216,10 +216,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->stopped_tx = 0;
 	uccf->stopped_rx = 0;
 	uf_regs = uccf->uf_regs;
-	uccf->p_ucce = (u32 *) & (uf_regs->ucce);
-	uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+	uccf->p_ucce = &uf_regs->ucce;
+	uccf->p_uccm = &uf_regs->uccm;
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
-	uccf->p_utodr = (u16 *) & (uf_regs->utodr);
+	uccf->p_utodr = &uf_regs->utodr;
 #endif
 #ifdef STATISTICS
 	uccf->tx_frames = 0;
diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
index f529f70b1d8..fce16abe7ee 100644
--- a/include/asm-powerpc/ucc_fast.h
+++ b/include/asm-powerpc/ucc_fast.h
@@ -156,11 +156,11 @@ struct ucc_fast_info {
 
 struct ucc_fast_private {
 	struct ucc_fast_info *uf_info;
-	struct ucc_fast *uf_regs;	/* a pointer to memory map of UCC regs. */
-	u32 *p_ucce;		/* a pointer to the event register in memory. */
-	u32 *p_uccm;		/* a pointer to the mask register in memory. */
+	struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
+	u32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
+	u32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
-	u16 *p_utodr;		/* pointer to the transmit on demand register */
+	u16 __iomem *p_utodr;	/* pointer to the transmit on demand register */
 #endif
 	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
 	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
-- 
cgit v1.2.3


From d87eb12785c14de1586e3bad86ca2c0991300339 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Fri, 11 Jul 2008 18:04:45 -0500
Subject: gianfar: Add magic packet and suspend/resume support.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_soc.c |   3 ++
 drivers/net/gianfar.c         | 122 +++++++++++++++++++++++++++++++++++++++++-
 drivers/net/gianfar.h         |  12 ++++-
 drivers/net/gianfar_ethtool.c |  41 +++++++++++++-
 include/linux/fsl_devices.h   |   1 +
 5 files changed, 173 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index ef4cb0d67a7..214388e1180 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -352,6 +352,9 @@ static int __init gfar_of_init(void)
 		else
 			gfar_data.interface = PHY_INTERFACE_MODE_MII;
 
+		if (of_get_property(np, "fsl,magic-packet", NULL))
+			gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
+
 		ph = of_get_property(np, "phy-handle", NULL);
 		if (ph == NULL) {
 			u32 *fixed_link;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 25bdd0832df..36f229ff52f 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -143,6 +143,9 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int l
 static void gfar_vlan_rx_register(struct net_device *netdev,
 		                struct vlan_group *grp);
 void gfar_halt(struct net_device *dev);
+#ifdef CONFIG_PM
+static void gfar_halt_nodisable(struct net_device *dev);
+#endif
 void gfar_start(struct net_device *dev);
 static void gfar_clear_exact_match(struct net_device *dev);
 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
@@ -216,6 +219,7 @@ static int gfar_probe(struct platform_device *pdev)
 
 	spin_lock_init(&priv->txlock);
 	spin_lock_init(&priv->rxlock);
+	spin_lock_init(&priv->bflock);
 
 	platform_set_drvdata(pdev, dev);
 
@@ -393,6 +397,103 @@ static int gfar_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int gfar_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct gfar_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	u32 tempval;
+
+	int magic_packet = priv->wol_en &&
+		(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
+
+	netif_device_detach(dev);
+
+	if (netif_running(dev)) {
+		spin_lock_irqsave(&priv->txlock, flags);
+		spin_lock(&priv->rxlock);
+
+		gfar_halt_nodisable(dev);
+
+		/* Disable Tx, and Rx if wake-on-LAN is disabled. */
+		tempval = gfar_read(&priv->regs->maccfg1);
+
+		tempval &= ~MACCFG1_TX_EN;
+
+		if (!magic_packet)
+			tempval &= ~MACCFG1_RX_EN;
+
+		gfar_write(&priv->regs->maccfg1, tempval);
+
+		spin_unlock(&priv->rxlock);
+		spin_unlock_irqrestore(&priv->txlock, flags);
+
+#ifdef CONFIG_GFAR_NAPI
+		napi_disable(&priv->napi);
+#endif
+
+		if (magic_packet) {
+			/* Enable interrupt on Magic Packet */
+			gfar_write(&priv->regs->imask, IMASK_MAG);
+
+			/* Enable Magic Packet mode */
+			tempval = gfar_read(&priv->regs->maccfg2);
+			tempval |= MACCFG2_MPEN;
+			gfar_write(&priv->regs->maccfg2, tempval);
+		} else {
+			phy_stop(priv->phydev);
+		}
+	}
+
+	return 0;
+}
+
+static int gfar_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct gfar_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	u32 tempval;
+	int magic_packet = priv->wol_en &&
+		(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
+
+	if (!netif_running(dev)) {
+		netif_device_attach(dev);
+		return 0;
+	}
+
+	if (!magic_packet && priv->phydev)
+		phy_start(priv->phydev);
+
+	/* Disable Magic Packet mode, in case something
+	 * else woke us up.
+	 */
+
+	spin_lock_irqsave(&priv->txlock, flags);
+	spin_lock(&priv->rxlock);
+
+	tempval = gfar_read(&priv->regs->maccfg2);
+	tempval &= ~MACCFG2_MPEN;
+	gfar_write(&priv->regs->maccfg2, tempval);
+
+	gfar_start(dev);
+
+	spin_unlock(&priv->rxlock);
+	spin_unlock_irqrestore(&priv->txlock, flags);
+
+	netif_device_attach(dev);
+
+#ifdef CONFIG_GFAR_NAPI
+	napi_enable(&priv->napi);
+#endif
+
+	return 0;
+}
+#else
+#define gfar_suspend NULL
+#define gfar_resume NULL
+#endif
 
 /* Reads the controller's registers to determine what interface
  * connects it to the PHY.
@@ -549,8 +650,9 @@ static void init_registers(struct net_device *dev)
 }
 
 
+#ifdef CONFIG_PM
 /* Halt the receive and transmit queues */
-void gfar_halt(struct net_device *dev)
+static void gfar_halt_nodisable(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	struct gfar __iomem *regs = priv->regs;
@@ -573,6 +675,15 @@ void gfar_halt(struct net_device *dev)
 			 (IEVENT_GRSC | IEVENT_GTSC)))
 			cpu_relax();
 	}
+}
+#endif
+
+/* Halt the receive and transmit queues */
+void gfar_halt(struct net_device *dev)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = priv->regs;
+	u32 tempval;
 
 	/* Disable Rx and Tx */
 	tempval = gfar_read(&regs->maccfg1);
@@ -1969,7 +2080,12 @@ static irqreturn_t gfar_error(int irq, void *dev_id)
 	u32 events = gfar_read(&priv->regs->ievent);
 
 	/* Clear IEVENT */
-	gfar_write(&priv->regs->ievent, IEVENT_ERR_MASK);
+	gfar_write(&priv->regs->ievent, events & IEVENT_ERR_MASK);
+
+	/* Magic Packet is not an error. */
+	if ((priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) &&
+	    (events & IEVENT_MAG))
+		events &= ~IEVENT_MAG;
 
 	/* Hmm... */
 	if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
@@ -2042,6 +2158,8 @@ MODULE_ALIAS("platform:fsl-gianfar");
 static struct platform_driver gfar_driver = {
 	.probe = gfar_probe,
 	.remove = gfar_remove,
+	.suspend = gfar_suspend,
+	.resume = gfar_resume,
 	.driver	= {
 		.name = "fsl-gianfar",
 		.owner = THIS_MODULE,
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 27f37c81e52..5ee518a8782 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -168,6 +168,7 @@ extern const char gfar_driver_version[];
 #define MACCFG2_GMII            0x00000200
 #define MACCFG2_HUGEFRAME	0x00000020
 #define MACCFG2_LENGTHCHECK	0x00000010
+#define MACCFG2_MPEN		0x00000008
 
 #define ECNTRL_INIT_SETTINGS	0x00001000
 #define ECNTRL_TBI_MODE         0x00000020
@@ -240,6 +241,7 @@ extern const char gfar_driver_version[];
 #define IEVENT_CRL		0x00020000
 #define IEVENT_XFUN		0x00010000
 #define IEVENT_RXB0		0x00008000
+#define IEVENT_MAG		0x00000800
 #define IEVENT_GRSC		0x00000100
 #define IEVENT_RXF0		0x00000080
 #define IEVENT_FIR		0x00000008
@@ -252,7 +254,8 @@ extern const char gfar_driver_version[];
 #define IEVENT_ERR_MASK         \
 (IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \
  IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \
- | IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR)
+ | IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \
+ | IEVENT_MAG)
 
 #define IMASK_INIT_CLEAR	0x00000000
 #define IMASK_BABR              0x80000000
@@ -270,6 +273,7 @@ extern const char gfar_driver_version[];
 #define IMASK_CRL		0x00020000
 #define IMASK_XFUN		0x00010000
 #define IMASK_RXB0              0x00008000
+#define IMASK_MAG		0x00000800
 #define IMASK_GTSC              0x00000100
 #define IMASK_RXFEN0		0x00000080
 #define IMASK_FIR		0x00000008
@@ -737,10 +741,14 @@ struct gfar_private {
 	unsigned int fifo_starve;
 	unsigned int fifo_starve_off;
 
+	/* Bitfield update lock */
+	spinlock_t bflock;
+
 	unsigned char vlan_enable:1,
 		rx_csum_enable:1,
 		extended_hash:1,
-		bd_stash_en:1;
+		bd_stash_en:1,
+		wol_en:1; /* Wake-on-LAN enabled */
 	unsigned short padding;
 
 	unsigned int interruptTransmit;
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 6007147cc1e..fb7d3ccc0fd 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -479,14 +479,13 @@ static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rva
 static int gfar_set_rx_csum(struct net_device *dev, uint32_t data)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	unsigned long flags;
 	int err = 0;
 
 	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
 		return -EOPNOTSUPP;
 
 	if (dev->flags & IFF_UP) {
-		unsigned long flags;
-
 		/* Halt TX and RX, and process the frames which
 		 * have already been received */
 		spin_lock_irqsave(&priv->txlock, flags);
@@ -502,7 +501,9 @@ static int gfar_set_rx_csum(struct net_device *dev, uint32_t data)
 		stop_gfar(dev);
 	}
 
+	spin_lock_irqsave(&priv->bflock, flags);
 	priv->rx_csum_enable = data;
+	spin_unlock_irqrestore(&priv->bflock, flags);
 
 	if (dev->flags & IFF_UP)
 		err = startup_gfar(dev);
@@ -564,6 +565,38 @@ static void gfar_set_msglevel(struct net_device *dev, uint32_t data)
 	priv->msg_enable = data;
 }
 
+#ifdef CONFIG_PM
+static void gfar_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+
+	if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) {
+		wol->supported = WAKE_MAGIC;
+		wol->wolopts = priv->wol_en ? WAKE_MAGIC : 0;
+	} else {
+		wol->supported = wol->wolopts = 0;
+	}
+}
+
+static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) &&
+	    wol->wolopts != 0)
+		return -EINVAL;
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+
+	spin_lock_irqsave(&priv->bflock, flags);
+	priv->wol_en = wol->wolopts & WAKE_MAGIC ? 1 : 0;
+	spin_unlock_irqrestore(&priv->bflock, flags);
+
+	return 0;
+}
+#endif
 
 const struct ethtool_ops gfar_ethtool_ops = {
 	.get_settings = gfar_gsettings,
@@ -585,4 +618,8 @@ const struct ethtool_ops gfar_ethtool_ops = {
 	.set_tx_csum = gfar_set_tx_csum,
 	.get_msglevel = gfar_get_msglevel,
 	.set_msglevel = gfar_set_msglevel,
+#ifdef CONFIG_PM
+	.get_wol = gfar_get_wol,
+	.set_wol = gfar_set_wol,
+#endif
 };
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 0472877d7ea..4e625e0094c 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -69,6 +69,7 @@ struct gianfar_mdio_data {
 #define FSL_GIANFAR_DEV_HAS_VLAN		0x00000020
 #define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH	0x00000040
 #define FSL_GIANFAR_DEV_HAS_PADDING		0x00000080
+#define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET	0x00000100
 
 /* Flags in gianfar_platform_data */
 #define FSL_GIANFAR_BRD_HAS_PHY_INTR	0x00000001 /* set or use a timer */
-- 
cgit v1.2.3


From 00262986ceeb5c3358b70491aa898906503a0fe7 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Fri, 11 Jul 2008 18:04:43 -0500
Subject: Add fsl,magic-packet to, and clean up, the gianfar binding.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 Documentation/powerpc/dts-bindings/fsl/tsec.txt | 31 ++++++++++---------------
 1 file changed, 12 insertions(+), 19 deletions(-)

diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
index 583ef6b56c4..cf55fa4112d 100644
--- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
@@ -24,46 +24,39 @@ Example:
 
 * Gianfar-compatible ethernet nodes
 
-Required properties:
+Properties:
 
   - device_type : Should be "network"
   - model : Model of the device.  Can be "TSEC", "eTSEC", or "FEC"
   - compatible : Should be "gianfar"
   - reg : Offset and length of the register set for the device
-  - mac-address : List of bytes representing the ethernet address of
+  - local-mac-address : List of bytes representing the ethernet address of
     this controller
-  - interrupts : <a b> where a is the interrupt number and b is a
-    field that represents an encoding of the sense and level
-    information for the interrupt.  This should be encoded based on
-    the information in section 2) depending on the type of interrupt
-    controller you have.
-  - interrupt-parent : the phandle for the interrupt controller that
-    services interrupts for this device.
+  - interrupts : For FEC devices, the first interrupt is the device's
+    interrupt.  For TSEC and eTSEC devices, the first interrupt is
+    transmit, the second is receive, and the third is error.
   - phy-handle : The phandle for the PHY connected to this ethernet
     controller.
   - fixed-link : <a b c d e> where a is emulated phy id - choose any,
     but unique to the all specified fixed-links, b is duplex - 0 half,
     1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
     pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
-
-Recommended properties:
-
   - phy-connection-type : a string naming the controller/PHY interface type,
     i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
     "tbi", or "rtbi".  This property is only really needed if the connection
     is of type "rgmii-id", as all other connection types are detected by
     hardware.
-
+  - fsl,magic-packet : If present, indicates that the hardware supports
+    waking up via magic packet.
 
 Example:
 	ethernet@24000 {
-		#size-cells = <0>;
 		device_type = "network";
 		model = "TSEC";
 		compatible = "gianfar";
-		reg = <24000 1000>;
-		mac-address = [ 00 E0 0C 00 73 00 ];
-		interrupts = <d 3 e 3 12 3>;
-		interrupt-parent = <40000>;
-		phy-handle = <2452000>
+		reg = <0x24000 0x1000>;
+		local-mac-address = [ 00 E0 0C 00 73 00 ];
+		interrupts = <29 2 30 2 34 2>;
+		interrupt-parent = <&mpic>;
+		phy-handle = <&phy0>
 	};
-- 
cgit v1.2.3


From b219108cbacee5f2eaeca63cba013688eeba3bd4 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 12 Jun 2008 08:32:13 -0500
Subject: fs_enet: Remove !CONFIG_PPC_CPM_NEW_BINDING code

Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so
we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING.

Also fixed some asm/of_platform.h to linux/of_platform.h (and of_device.h)

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 drivers/net/fs_enet/Makefile       |   5 -
 drivers/net/fs_enet/fs_enet-main.c | 310 +------------------------------------
 drivers/net/fs_enet/fs_enet.h      |   4 -
 drivers/net/fs_enet/mac-fcc.c      |  67 +-------
 drivers/net/fs_enet/mac-fec.c      |  23 +--
 drivers/net/fs_enet/mac-scc.c      |  37 +----
 drivers/net/fs_enet/mii-bitbang.c  | 107 -------------
 drivers/net/fs_enet/mii-fec.c      | 144 +----------------
 include/linux/fs_enet_pd.h         |   4 -
 9 files changed, 5 insertions(+), 696 deletions(-)

diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile
index 1ffbe0756a0..d4a305ee345 100644
--- a/drivers/net/fs_enet/Makefile
+++ b/drivers/net/fs_enet/Makefile
@@ -8,12 +8,7 @@ fs_enet-$(CONFIG_FS_ENET_HAS_SCC) += mac-scc.o
 fs_enet-$(CONFIG_FS_ENET_HAS_FEC) += mac-fec.o
 fs_enet-$(CONFIG_FS_ENET_HAS_FCC) += mac-fcc.o
 
-ifeq ($(CONFIG_PPC_CPM_NEW_BINDING),y)
 obj-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
 obj-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
-else
-fs_enet-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
-fs_enet-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
-endif
 
 fs_enet-objs := fs_enet-main.o $(fs_enet-m)
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 352574a3f05..ac2c48741d0 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -36,25 +36,17 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/of_platform.h>
 
 #include <linux/vmalloc.h>
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <linux/of_platform.h>
-#endif
-
 #include "fs_enet.h"
 
 /*************************************************/
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static char version[] __devinitdata =
-    DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")" "\n";
-#endif
-
 MODULE_AUTHOR("Pantelis Antoniou <panto@intracom.gr>");
 MODULE_DESCRIPTION("Freescale Ethernet Driver");
 MODULE_LICENSE("GPL");
@@ -957,190 +949,6 @@ static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 extern int fs_mii_connect(struct net_device *dev);
 extern void fs_mii_disconnect(struct net_device *dev);
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static struct net_device *fs_init_instance(struct device *dev,
-		struct fs_platform_info *fpi)
-{
-	struct net_device *ndev = NULL;
-	struct fs_enet_private *fep = NULL;
-	int privsize, i, r, err = 0, registered = 0;
-
-	fpi->fs_no = fs_get_id(fpi);
-	/* guard */
-	if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX)
-		return ERR_PTR(-EINVAL);
-
-	privsize = sizeof(*fep) + (sizeof(struct sk_buff **) *
-			    (fpi->rx_ring + fpi->tx_ring));
-
-	ndev = alloc_etherdev(privsize);
-	if (!ndev) {
-		err = -ENOMEM;
-		goto err;
-	}
-
-	fep = netdev_priv(ndev);
-
-	fep->dev = dev;
-	dev_set_drvdata(dev, ndev);
-	fep->fpi = fpi;
-	if (fpi->init_ioports)
-		fpi->init_ioports((struct fs_platform_info *)fpi);
-
-#ifdef CONFIG_FS_ENET_HAS_FEC
-	if (fs_get_fec_index(fpi->fs_no) >= 0)
-		fep->ops = &fs_fec_ops;
-#endif
-
-#ifdef CONFIG_FS_ENET_HAS_SCC
-	if (fs_get_scc_index(fpi->fs_no) >=0)
-		fep->ops = &fs_scc_ops;
-#endif
-
-#ifdef CONFIG_FS_ENET_HAS_FCC
-	if (fs_get_fcc_index(fpi->fs_no) >= 0)
-		fep->ops = &fs_fcc_ops;
-#endif
-
-	if (fep->ops == NULL) {
-		printk(KERN_ERR DRV_MODULE_NAME
-		       ": %s No matching ops found (%d).\n",
-		       ndev->name, fpi->fs_no);
-		err = -EINVAL;
-		goto err;
-	}
-
-	r = (*fep->ops->setup_data)(ndev);
-	if (r != 0) {
-		printk(KERN_ERR DRV_MODULE_NAME
-		       ": %s setup_data failed\n",
-			ndev->name);
-		err = r;
-		goto err;
-	}
-
-	/* point rx_skbuff, tx_skbuff */
-	fep->rx_skbuff = (struct sk_buff **)&fep[1];
-	fep->tx_skbuff = fep->rx_skbuff + fpi->rx_ring;
-
-	/* init locks */
-	spin_lock_init(&fep->lock);
-	spin_lock_init(&fep->tx_lock);
-
-	/*
-	 * Set the Ethernet address.
-	 */
-	for (i = 0; i < 6; i++)
-		ndev->dev_addr[i] = fpi->macaddr[i];
-
-	r = (*fep->ops->allocate_bd)(ndev);
-
-	if (fep->ring_base == NULL) {
-		printk(KERN_ERR DRV_MODULE_NAME
-		       ": %s buffer descriptor alloc failed (%d).\n", ndev->name, r);
-		err = r;
-		goto err;
-	}
-
-	/*
-	 * Set receive and transmit descriptor base.
-	 */
-	fep->rx_bd_base = fep->ring_base;
-	fep->tx_bd_base = fep->rx_bd_base + fpi->rx_ring;
-
-	/* initialize ring size variables */
-	fep->tx_ring = fpi->tx_ring;
-	fep->rx_ring = fpi->rx_ring;
-
-	/*
-	 * The FEC Ethernet specific entries in the device structure.
-	 */
-	ndev->open = fs_enet_open;
-	ndev->hard_start_xmit = fs_enet_start_xmit;
-	ndev->tx_timeout = fs_timeout;
-	ndev->watchdog_timeo = 2 * HZ;
-	ndev->stop = fs_enet_close;
-	ndev->get_stats = fs_enet_get_stats;
-	ndev->set_multicast_list = fs_set_multicast_list;
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	ndev->poll_controller = fs_enet_netpoll;
-#endif
-
-	netif_napi_add(ndev, &fep->napi,
-		       fs_enet_rx_napi, fpi->napi_weight);
-
-	ndev->ethtool_ops = &fs_ethtool_ops;
-	ndev->do_ioctl = fs_ioctl;
-
-	init_timer(&fep->phy_timer_list);
-
-	netif_carrier_off(ndev);
-
-	err = register_netdev(ndev);
-	if (err != 0) {
-		printk(KERN_ERR DRV_MODULE_NAME
-		       ": %s register_netdev failed.\n", ndev->name);
-		goto err;
-	}
-	registered = 1;
-
-
-	return ndev;
-
-err:
-	if (ndev != NULL) {
-		if (registered)
-			unregister_netdev(ndev);
-
-		if (fep && fep->ops) {
-			(*fep->ops->free_bd)(ndev);
-			(*fep->ops->cleanup_data)(ndev);
-		}
-
-		free_netdev(ndev);
-	}
-
-	dev_set_drvdata(dev, NULL);
-
-	return ERR_PTR(err);
-}
-
-static int fs_cleanup_instance(struct net_device *ndev)
-{
-	struct fs_enet_private *fep;
-	const struct fs_platform_info *fpi;
-	struct device *dev;
-
-	if (ndev == NULL)
-		return -EINVAL;
-
-	fep = netdev_priv(ndev);
-	if (fep == NULL)
-		return -EINVAL;
-
-	fpi = fep->fpi;
-
-	unregister_netdev(ndev);
-
-	dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t),
-			  (void __force *)fep->ring_base, fep->ring_mem_addr);
-
-	/* reset it */
-	(*fep->ops->cleanup_data)(ndev);
-
-	dev = fep->dev;
-	if (dev != NULL) {
-		dev_set_drvdata(dev, NULL);
-		fep->dev = NULL;
-	}
-
-	free_netdev(ndev);
-
-	return 0;
-}
-#endif
-
 /**************************************************************************************/
 
 /* handy pointer to the immap */
@@ -1167,7 +975,6 @@ static void cleanup_immap(void)
 
 /**************************************************************************************/
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 static int __devinit find_phy(struct device_node *np,
                               struct fs_platform_info *fpi)
 {
@@ -1399,121 +1206,6 @@ static void __exit fs_cleanup(void)
 	of_unregister_platform_driver(&fs_enet_driver);
 	cleanup_immap();
 }
-#else
-static int __devinit fs_enet_probe(struct device *dev)
-{
-	struct net_device *ndev;
-
-	/* no fixup - no device */
-	if (dev->platform_data == NULL) {
-		printk(KERN_INFO "fs_enet: "
-				"probe called with no platform data; "
-				"remove unused devices\n");
-		return -ENODEV;
-	}
-
-	ndev = fs_init_instance(dev, dev->platform_data);
-	if (IS_ERR(ndev))
-		return PTR_ERR(ndev);
-	return 0;
-}
-
-static int fs_enet_remove(struct device *dev)
-{
-	return fs_cleanup_instance(dev_get_drvdata(dev));
-}
-
-static struct device_driver fs_enet_fec_driver = {
-	.name	  	= "fsl-cpm-fec",
-	.bus		= &platform_bus_type,
-	.probe		= fs_enet_probe,
-	.remove		= fs_enet_remove,
-#ifdef CONFIG_PM
-/*	.suspend	= fs_enet_suspend,	TODO */
-/*	.resume		= fs_enet_resume,	TODO */
-#endif
-};
-
-static struct device_driver fs_enet_scc_driver = {
-	.name	  	= "fsl-cpm-scc",
-	.bus		= &platform_bus_type,
-	.probe		= fs_enet_probe,
-	.remove		= fs_enet_remove,
-#ifdef CONFIG_PM
-/*	.suspend	= fs_enet_suspend,	TODO */
-/*	.resume		= fs_enet_resume,	TODO */
-#endif
-};
-
-static struct device_driver fs_enet_fcc_driver = {
-	.name	  	= "fsl-cpm-fcc",
-	.bus		= &platform_bus_type,
-	.probe		= fs_enet_probe,
-	.remove		= fs_enet_remove,
-#ifdef CONFIG_PM
-/*	.suspend	= fs_enet_suspend,	TODO */
-/*	.resume		= fs_enet_resume,	TODO */
-#endif
-};
-
-static int __init fs_init(void)
-{
-	int r;
-
-	printk(KERN_INFO
-			"%s", version);
-
-	r = setup_immap();
-	if (r != 0)
-		return r;
-
-#ifdef CONFIG_FS_ENET_HAS_FCC
-	/* let's insert mii stuff */
-	r = fs_enet_mdio_bb_init();
-
-	if (r != 0) {
-		printk(KERN_ERR DRV_MODULE_NAME
-			"BB PHY init failed.\n");
-		return r;
-	}
-	r = driver_register(&fs_enet_fcc_driver);
-	if (r != 0)
-		goto err;
-#endif
-
-#ifdef CONFIG_FS_ENET_HAS_FEC
-	r =  fs_enet_mdio_fec_init();
-	if (r != 0) {
-		printk(KERN_ERR DRV_MODULE_NAME
-			"FEC PHY init failed.\n");
-		return r;
-	}
-
-	r = driver_register(&fs_enet_fec_driver);
-	if (r != 0)
-		goto err;
-#endif
-
-#ifdef CONFIG_FS_ENET_HAS_SCC
-	r = driver_register(&fs_enet_scc_driver);
-	if (r != 0)
-		goto err;
-#endif
-
-	return 0;
-err:
-	cleanup_immap();
-	return r;
-}
-
-static void __exit fs_cleanup(void)
-{
-	driver_unregister(&fs_enet_fec_driver);
-	driver_unregister(&fs_enet_fcc_driver);
-	driver_unregister(&fs_enet_scc_driver);
-	cleanup_immap();
-}
-#endif
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void fs_enet_netpoll(struct net_device *dev)
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
index e05389c49bb..db46d2e7232 100644
--- a/drivers/net/fs_enet/fs_enet.h
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -138,10 +138,6 @@ struct fs_enet_private {
 };
 
 /***************************************************************************/
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-int fs_enet_mdio_bb_init(void);
-int fs_enet_mdio_fec_init(void);
-#endif
 
 void fs_init_bds(struct net_device *dev);
 void fs_cleanup_bds(struct net_device *dev);
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index 8268b3535b3..0a97fc2d97e 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -33,6 +33,7 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/of_device.h>
 
 #include <asm/immap_cpm2.h>
 #include <asm/mpc8260.h>
@@ -42,10 +43,6 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <asm/of_device.h>
-#endif
-
 #include "fs_enet.h"
 
 /*************************************************/
@@ -87,7 +84,6 @@ static inline int fcc_cr_cmd(struct fs_enet_private *fep, u32 op)
 
 static int do_pd_setup(struct fs_enet_private *fep)
 {
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	struct of_device *ofdev = to_of_device(fep->dev);
 	struct fs_platform_info *fpi = fep->fpi;
 	int ret = -EINVAL;
@@ -125,44 +121,6 @@ out_fccp:
 	iounmap(fep->fcc.fccp);
 out:
 	return ret;
-#else
-	struct platform_device *pdev = to_platform_device(fep->dev);
-	struct resource *r;
-
-	/* Fill out IRQ field */
-	fep->interrupt = platform_get_irq(pdev, 0);
-	if (fep->interrupt < 0)
-		return -EINVAL;
-
-	/* Attach the memory for the FCC Parameter RAM */
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_pram");
-	fep->fcc.ep = ioremap(r->start, r->end - r->start + 1);
-	if (fep->fcc.ep == NULL)
-		return -EINVAL;
-
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_regs");
-	fep->fcc.fccp = ioremap(r->start, r->end - r->start + 1);
-	if (fep->fcc.fccp == NULL)
-		return -EINVAL;
-
-	if (fep->fpi->fcc_regs_c) {
-		fep->fcc.fcccp = (void __iomem *)fep->fpi->fcc_regs_c;
-	} else {
-		r = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-				"fcc_regs_c");
-		fep->fcc.fcccp = ioremap(r->start,
-				r->end - r->start + 1);
-	}
-
-	if (fep->fcc.fcccp == NULL)
-		return -EINVAL;
-
-	fep->fcc.mem = (void __iomem *)fep->fpi->mem_offset;
-	if (fep->fcc.mem == NULL)
-		return -EINVAL;
-
-	return 0;
-#endif
 }
 
 #define FCC_NAPI_RX_EVENT_MSK	(FCC_ENET_RXF | FCC_ENET_RXB)
@@ -173,17 +131,6 @@ out:
 static int setup_data(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-	struct fs_platform_info *fpi = fep->fpi;
-
-	fpi->cp_command = (fpi->cp_page << 26) |
-	                  (fpi->cp_block << 21) |
-	                  (12 << 6);
-
-	fep->fcc.idx = fs_get_fcc_index(fpi->fs_no);
-	if ((unsigned int)fep->fcc.idx >= 3)	/* max 3 FCCs */
-		return -EINVAL;
-#endif
 
 	if (do_pd_setup(fep) != 0)
 		return -EINVAL;
@@ -304,9 +251,6 @@ static void restart(struct net_device *dev)
 	fcc_enet_t __iomem *ep = fep->fcc.ep;
 	dma_addr_t rx_bd_base_phys, tx_bd_base_phys;
 	u16 paddrh, paddrm, paddrl;
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-	u16 mem_addr;
-#endif
 	const unsigned char *mac;
 	int i;
 
@@ -338,19 +282,10 @@ static void restart(struct net_device *dev)
 	 * this area.
 	 */
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	W16(ep, fen_genfcc.fcc_riptr, fpi->dpram_offset);
 	W16(ep, fen_genfcc.fcc_tiptr, fpi->dpram_offset + 32);
 
 	W16(ep, fen_padptr, fpi->dpram_offset + 64);
-#else
-	mem_addr = (u32) fep->fcc.mem;	/* de-fixup dpram offset */
-
-	W16(ep, fen_genfcc.fcc_riptr, (mem_addr & 0xffff));
-	W16(ep, fen_genfcc.fcc_tiptr, ((mem_addr + 32) & 0xffff));
-
-	W16(ep, fen_padptr, mem_addr + 64);
-#endif
 
 	/* fill with special symbol...  */
 	memset_io(fep->fcc.mem + fpi->dpram_offset + 64, 0x88, 32);
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
index 8a311d1e435..0a7d1c5c652 100644
--- a/drivers/net/fs_enet/mac-fec.c
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -32,6 +32,7 @@
 #include <linux/bitops.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>
+#include <linux/of_device.h>
 
 #include <asm/irq.h>
 #include <asm/uaccess.h>
@@ -43,10 +44,6 @@
 #include <asm/cpm1.h>
 #endif
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <asm/of_device.h>
-#endif
-
 #include "fs_enet.h"
 #include "fec.h"
 
@@ -99,7 +96,6 @@ static int whack_reset(fec_t __iomem *fecp)
 
 static int do_pd_setup(struct fs_enet_private *fep)
 {
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	struct of_device *ofdev = to_of_device(fep->dev);
 
 	fep->interrupt = of_irq_to_resource(ofdev->node, 0, NULL);
@@ -111,23 +107,6 @@ static int do_pd_setup(struct fs_enet_private *fep)
 		return -EINVAL;
 
 	return 0;
-#else
-	struct platform_device *pdev = to_platform_device(fep->dev);
-	struct resource	*r;
-
-	/* Fill out IRQ field */
-	fep->interrupt = platform_get_irq_byname(pdev,"interrupt");
-	if (fep->interrupt < 0)
-		return -EINVAL;
-
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
-	fep->fec.fecp = ioremap(r->start, r->end - r->start + 1);
-
-	if(fep->fec.fecp == NULL)
-		return -EINVAL;
-
-	return 0;
-#endif
 }
 
 #define FEC_NAPI_RX_EVENT_MSK	(FEC_ENET_RXF | FEC_ENET_RXB)
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index e3557eca7b6..029b3c7ef29 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -32,6 +32,7 @@
 #include <linux/bitops.h>
 #include <linux/fs.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 
 #include <asm/irq.h>
 #include <asm/uaccess.h>
@@ -43,10 +44,6 @@
 #include <asm/cpm1.h>
 #endif
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <linux/of_platform.h>
-#endif
-
 #include "fs_enet.h"
 
 /*************************************************/
@@ -99,7 +96,6 @@ static inline int scc_cr_cmd(struct fs_enet_private *fep, u32 op)
 
 static int do_pd_setup(struct fs_enet_private *fep)
 {
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	struct of_device *ofdev = to_of_device(fep->dev);
 
 	fep->interrupt = of_irq_to_resource(ofdev->node, 0, NULL);
@@ -115,27 +111,6 @@ static int do_pd_setup(struct fs_enet_private *fep)
 		iounmap(fep->scc.sccp);
 		return -EINVAL;
 	}
-#else
-	struct platform_device *pdev = to_platform_device(fep->dev);
-	struct resource *r;
-
-	/* Fill out IRQ field */
-	fep->interrupt = platform_get_irq_byname(pdev, "interrupt");
-	if (fep->interrupt < 0)
-		return -EINVAL;
-
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
-	fep->scc.sccp = ioremap(r->start, r->end - r->start + 1);
-
-	if (fep->scc.sccp == NULL)
-		return -EINVAL;
-
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram");
-	fep->scc.ep = ioremap(r->start, r->end - r->start + 1);
-
-	if (fep->scc.ep == NULL)
-		return -EINVAL;
-#endif
 
 	return 0;
 }
@@ -149,16 +124,6 @@ static int setup_data(struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-	struct fs_platform_info *fpi = fep->fpi;
-
-	fep->scc.idx = fs_get_scc_index(fpi->fs_no);
-	if ((unsigned int)fep->fcc.idx >= 4) /* max 4 SCCs */
-		return -EINVAL;
-
-	fpi->cp_command = fep->fcc.idx << 6;
-#endif
-
 	do_pd_setup(fep);
 
 	fep->scc.hthi = 0;
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
index 1620030cd33..be4b72f4f49 100644
--- a/drivers/net/fs_enet/mii-bitbang.c
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -22,10 +22,7 @@
 #include <linux/mii.h>
 #include <linux/platform_device.h>
 #include <linux/mdio-bitbang.h>
-
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 #include <linux/of_platform.h>
-#endif
 
 #include "fs_enet.h"
 
@@ -110,7 +107,6 @@ static struct mdiobb_ops bb_ops = {
 	.get_mdio_data = mdio_read,
 };
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 static int __devinit fs_mii_bitbang_init(struct mii_bus *bus,
                                          struct device_node *np)
 {
@@ -271,106 +267,3 @@ static void fs_enet_mdio_bb_exit(void)
 
 module_init(fs_enet_mdio_bb_init);
 module_exit(fs_enet_mdio_bb_exit);
-#else
-static int __devinit fs_mii_bitbang_init(struct bb_info *bitbang,
-                                         struct fs_mii_bb_platform_info *fmpi)
-{
-	bitbang->dir = (u32 __iomem *)fmpi->mdio_dir.offset;
-	bitbang->dat = (u32 __iomem *)fmpi->mdio_dat.offset;
-	bitbang->mdio_msk = 1U << (31 - fmpi->mdio_dat.bit);
-	bitbang->mdc_msk = 1U << (31 - fmpi->mdc_dat.bit);
-
-	return 0;
-}
-
-static int __devinit fs_enet_mdio_probe(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct fs_mii_bb_platform_info *pdata;
-	struct mii_bus *new_bus;
-	struct bb_info *bitbang;
-	int err = 0;
-
-	if (NULL == dev)
-		return -EINVAL;
-
-	bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
-
-	if (NULL == bitbang)
-		return -ENOMEM;
-
-	bitbang->ctrl.ops = &bb_ops;
-
-	new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
-
-	if (NULL == new_bus)
-		return -ENOMEM;
-
-	new_bus->name = "BB MII Bus",
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
-
-	new_bus->phy_mask = ~0x9;
-	pdata = (struct fs_mii_bb_platform_info *)pdev->dev.platform_data;
-
-	if (NULL == pdata) {
-		printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
-		return -ENODEV;
-	}
-
-	/*set up workspace*/
-	fs_mii_bitbang_init(bitbang, pdata);
-
-	new_bus->priv = bitbang;
-
-	new_bus->irq = pdata->irq;
-
-	new_bus->dev = dev;
-	dev_set_drvdata(dev, new_bus);
-
-	err = mdiobus_register(new_bus);
-
-	if (0 != err) {
-		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
-				new_bus->name);
-		goto bus_register_fail;
-	}
-
-	return 0;
-
-bus_register_fail:
-	free_mdio_bitbang(new_bus);
-	kfree(bitbang);
-
-	return err;
-}
-
-static int fs_enet_mdio_remove(struct device *dev)
-{
-	struct mii_bus *bus = dev_get_drvdata(dev);
-
-	mdiobus_unregister(bus);
-
-	dev_set_drvdata(dev, NULL);
-
-	free_mdio_bitbang(bus);
-
-	return 0;
-}
-
-static struct device_driver fs_enet_bb_mdio_driver = {
-	.name = "fsl-bb-mdio",
-	.bus = &platform_bus_type,
-	.probe = fs_enet_mdio_probe,
-	.remove = fs_enet_mdio_remove,
-};
-
-int fs_enet_mdio_bb_init(void)
-{
-	return driver_register(&fs_enet_bb_mdio_driver);
-}
-
-void fs_enet_mdio_bb_exit(void)
-{
-	driver_unregister(&fs_enet_bb_mdio_driver);
-}
-#endif
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 8f6a43b0e0f..695f74cc439 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -31,15 +31,12 @@
 #include <linux/ethtool.h>
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
-#include <linux/of_platform.h>
-#endif
-
 #include "fs_enet.h"
 #include "fec.h"
 
@@ -51,52 +48,6 @@
 
 #define FEC_MII_LOOPS	10000
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static int match_has_phy (struct device *dev, void* data)
-{
-	struct platform_device* pdev = container_of(dev, struct platform_device, dev);
-	struct fs_platform_info* fpi;
-	if(strcmp(pdev->name, (char*)data))
-	{
-	    return 0;
-	}
-
-	fpi = pdev->dev.platform_data;
-	if((fpi)&&(fpi->has_phy))
-		return 1;
-	return 0;
-}
-
-static int fs_mii_fec_init(struct fec_info* fec, struct fs_mii_fec_platform_info *fmpi)
-{
-	struct resource *r;
-	fec_t __iomem *fecp;
-	char* name = "fsl-cpm-fec";
-
-	/* we need fec in order to be useful */
-	struct platform_device *fec_pdev =
-		container_of(bus_find_device(&platform_bus_type, NULL, name, match_has_phy),
-				struct platform_device, dev);
-
-	if(fec_pdev == NULL) {
-		printk(KERN_ERR"Unable to find PHY for %s", name);
-		return -ENODEV;
-	}
-
-	r = platform_get_resource_byname(fec_pdev, IORESOURCE_MEM, "regs");
-
-	fec->fecp = fecp = ioremap(r->start,sizeof(fec_t));
-	fec->mii_speed = fmpi->mii_speed;
-
-	setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);	/* MII enable */
-	setbits32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
-	out_be32(&fecp->fec_ievent, FEC_ENET_MII);
-	out_be32(&fecp->fec_mii_speed, fec->mii_speed);
-
-	return 0;
-}
-#endif
-
 static int fs_enet_fec_mii_read(struct mii_bus *bus , int phy_id, int location)
 {
 	struct fec_info* fec = bus->priv;
@@ -151,7 +102,6 @@ static int fs_enet_fec_mii_reset(struct mii_bus *bus)
 	return 0;
 }
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
 {
 	const u32 *data;
@@ -286,95 +236,3 @@ static void fs_enet_mdio_fec_exit(void)
 
 module_init(fs_enet_mdio_fec_init);
 module_exit(fs_enet_mdio_fec_exit);
-#else
-static int __devinit fs_enet_fec_mdio_probe(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct fs_mii_fec_platform_info *pdata;
-	struct mii_bus *new_bus;
-	struct fec_info *fec;
-	int err = 0;
-	if (NULL == dev)
-		return -EINVAL;
-	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
-
-	if (NULL == new_bus)
-		return -ENOMEM;
-
-	fec = kzalloc(sizeof(struct fec_info), GFP_KERNEL);
-
-	if (NULL == fec)
-		return -ENOMEM;
-
-	new_bus->name = "FEC MII Bus",
-	new_bus->read = &fs_enet_fec_mii_read,
-	new_bus->write = &fs_enet_fec_mii_write,
-	new_bus->reset = &fs_enet_fec_mii_reset,
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
-
-	pdata = (struct fs_mii_fec_platform_info *)pdev->dev.platform_data;
-
-	if (NULL == pdata) {
-		printk(KERN_ERR "fs_enet FEC mdio %d: Missing platform data!\n", pdev->id);
-		return -ENODEV;
-	}
-
-	/*set up workspace*/
-
-	fs_mii_fec_init(fec, pdata);
-	new_bus->priv = fec;
-
-	new_bus->irq = pdata->irq;
-
-	new_bus->dev = dev;
-	dev_set_drvdata(dev, new_bus);
-
-	err = mdiobus_register(new_bus);
-
-	if (0 != err) {
-		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
-				new_bus->name);
-		goto bus_register_fail;
-	}
-
-	return 0;
-
-bus_register_fail:
-	kfree(new_bus);
-
-	return err;
-}
-
-
-static int fs_enet_fec_mdio_remove(struct device *dev)
-{
-	struct mii_bus *bus = dev_get_drvdata(dev);
-
-	mdiobus_unregister(bus);
-
-	dev_set_drvdata(dev, NULL);
-	kfree(bus->priv);
-
-	bus->priv = NULL;
-	kfree(bus);
-
-	return 0;
-}
-
-static struct device_driver fs_enet_fec_mdio_driver = {
-	.name = "fsl-cpm-fec-mdio",
-	.bus = &platform_bus_type,
-	.probe = fs_enet_fec_mdio_probe,
-	.remove = fs_enet_fec_mdio_remove,
-};
-
-int fs_enet_mdio_fec_init(void)
-{
-	return driver_register(&fs_enet_fec_mdio_driver);
-}
-
-void fs_enet_mdio_fec_exit(void)
-{
-	driver_unregister(&fs_enet_fec_mdio_driver);
-}
-#endif
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 9bc045b8c47..0ba21ee0f58 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -135,11 +135,7 @@ struct fs_platform_info {
 	u32 device_flags;
 
 	int phy_addr;		/* the phy address (-1 no phy) */
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	char bus_id[16];
-#else
-	const char*	bus_id;
-#endif
 	int phy_irq;		/* the phy irq (if it exists)  */
 
 	const struct fs_mii_bus_info *bus_info;
-- 
cgit v1.2.3


From 2d07db33d1875dcaada8eb7e69c68aeede722bb5 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 12 Jun 2008 08:33:12 -0500
Subject: powerpc: Remove Kconfig PPC_CPM_NEW_BINDING

With arch/ppc gone and all in kernel users of CONFIG_PPC_CPM_NEW_BINDING
fixed up we dont have need for the Kconfig option anymore.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/Kconfig | 1 -
 arch/powerpc/platforms/Kconfig      | 5 -----
 2 files changed, 6 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index cccc85a6504..291675b0097 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -86,7 +86,6 @@ config TQM8548
 	help
 	  This option enables support for the TQ Components TQM8548 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 
 config TQM8555
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index efe5805eecb..1d0968775c0 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -260,11 +260,6 @@ config CPM2
 	  you wish to build a kernel for a machine with a CPM2 coprocessor
 	  on it (826x, 827x, 8560).
 
-config PPC_CPM_NEW_BINDING
-	bool
-	depends on CPM1 || CPM2
-	default y
-
 config AXON_RAM
 	tristate "Axon DDR2 memory device driver"
 	depends on PPC_IBM_CELL_BLADE
-- 
cgit v1.2.3


From 6cfd8990e27d3a491c1c605d6cbc18a46ae51fef Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 9 Jul 2008 10:03:28 -0500
Subject: powerpc: rework FSL Book-E PTE access and TLB miss

This converts the FSL Book-E PTE access and TLB miss handling to match
with the recent changes to 44x that introduce support for non-atomic PTE
operations in pgtable-ppc32.h and removes write back to the PTE from
the TLB miss handlers. In addition, the DSI interrupt code no longer
tries to fixup write permission, this is left to generic code, and
_PAGE_HWWRITE is gone.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/kernel/head_fsl_booke.S | 168 +++++++++--------------------------
 include/asm-powerpc/pgtable-ppc32.h  |  15 +---
 2 files changed, 48 insertions(+), 135 deletions(-)

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index c4268500e85..7d554968b63 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -483,90 +483,16 @@ interrupt_base:
 
 	/* Data Storage Interrupt */
 	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, PAGE_OFFSET@h
-	cmplw	0, r10, r11
-	bge	2f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	FIND_PTE
-
-	/* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
-	andi.	r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
-	cmpwi	0, r13, _PAGE_RW|_PAGE_USER
-	bne	2f			/* Bail if not */
-
-	/* Update 'changed'. */
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */
-
-	/* MAS2 not updated as the entry does exist in the tlb, this
-	   fault taken to detect state transition (eg: COW -> DIRTY)
-	 */
-	andi.	r11, r11, _PAGE_HWEXEC
-	rlwimi	r11, r11, 31, 27, 27	/* SX <- _PAGE_HWEXEC */
-	ori	r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
-
-	/* update search PID in MAS6, AS = 0 */
-	mfspr	r12, SPRN_PID0
-	slwi	r12, r12, 16
-	mtspr	SPRN_MAS6, r12
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	0, r10
-
-	/* only update the perm bits, assume the RPN is fine */
-	mfspr	r12, SPRN_MAS3
-	rlwimi	r12, r11, 0, 20, 31
-	mtspr	SPRN_MAS3,r12
-	tlbwe
-
-	/* Done...restore registers and get out of here.  */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
+	bne	1f
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+1:
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
 
 	/* Instruction Storage Interrupt */
 	INSTRUCTION_STORAGE_EXCEPTION
@@ -645,15 +571,30 @@ interrupt_base:
 	lwz	r11,PGDIR(r11)
 
 4:
+	/* Mask of required permission bits. Note that while we
+	 * do copy ESR:ST to _PAGE_RW position as trying to write
+	 * to an RO page is pretty common, we don't do it with
+	 * _PAGE_DIRTY. We could do it, but it's a fairly rare
+	 * event so I'd rather take the overhead when it happens
+	 * rather than adding an instruction here. We should measure
+	 * whether the whole thing is worth it in the first place
+	 * as we could avoid loading SPRN_ESR completely in the first
+	 * place...
+	 *
+	 * TODO: Is it worth doing that mfspr & rlwimi in the first
+	 *       place or can we save a couple of instructions here ?
+	 */
+	mfspr	r12,SPRN_ESR
+	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+	rlwimi	r13,r12,11,29,29
+
 	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	andc.	r13,r13,r11		/* Check permission */
+	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
 	lwz	r13, 0(r12)
 #endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
 
 	 /* Jump to common tlb load */
 	b	finish_tlb_load
@@ -667,7 +608,7 @@ interrupt_base:
 	mfspr	r12, SPRN_SPRG4R
 	mfspr	r11, SPRN_SPRG1
 	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
 	/*
@@ -705,15 +646,16 @@ interrupt_base:
 	lwz	r11,PGDIR(r11)
 
 4:
+	/* Make up the required permissions */
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+
 	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	andc.	r13,r13,r11		/* Check permission */
+	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
 	lwz	r13, 0(r12)
 #endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
 
 	/* Jump to common TLB load point */
 	b	finish_tlb_load
@@ -768,29 +710,13 @@ interrupt_base:
  * Local functions
  */
 
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
-	bne	1f
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-1:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
-
 /*
-
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  *	r10 - EA of fault
  *	r11 - TLB (info from Linux PTE)
- *	r12, r13 - available to use
+ *	r12 - available to use
+ *	r13 - upper bits of PTE (if PTE_64BIT) or available to use
  *	CR5 - results of addr >= PAGE_OFFSET
  *	MAS0, MAS1 - loaded with proper value when we get here
  *	MAS2, MAS3 - will need additional info from Linux PTE
@@ -812,20 +738,14 @@ finish_tlb_load:
 #endif
 	mtspr	SPRN_MAS2, r12
 
-	bge	5, 1f
-
-	/* is user addr */
-	andi.	r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
+	li	r10, (_PAGE_HWEXEC | _PAGE_PRESENT)
+	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
+	and	r12, r11, r10
 	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
-	srwi	r10, r12, 1
-	or	r12, r12, r10	/* Copy user perms into supervisor */
-	iseleq	r12, 0, r12
-	b	2f
-
-	/* is kernel addr */
-1:	rlwinm	r12, r11, 31, 29, 29	/* Extract _PAGE_HWWRITE into SW */
-	ori	r12, r12, (MAS3_SX | MAS3_SR)
-
+	slwi	r10, r12, 1
+	or	r10, r10, r12
+	iseleq	r12, r12, r10
+	
 #ifdef CONFIG_PTE_64BIT
 2:	rlwimi	r12, r13, 24, 0, 7	/* grab RPN[32:39] */
 	rlwimi	r12, r11, 24, 8, 19	/* grab RPN[40:51] */
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 73015f0139d..3a96d001cb7 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -295,10 +295,10 @@ extern int icache_44x_need_flush;
 #define _PAGE_PRESENT	0x00001	/* S: PTE contains a translation */
 #define _PAGE_USER	0x00002	/* S: User page (maps to UR) */
 #define _PAGE_FILE	0x00002	/* S: when !present: nonlinear file mapping */
-#define _PAGE_ACCESSED	0x00004	/* S: Page referenced */
-#define _PAGE_HWWRITE	0x00008	/* H: Dirty & RW, set in exception */
-#define _PAGE_RW	0x00010	/* S: Write permission */
-#define _PAGE_HWEXEC	0x00020	/* H: UX permission */
+#define _PAGE_RW	0x00004	/* S: Write permission (SW) */
+#define _PAGE_DIRTY	0x00008	/* S: Page dirty */
+#define _PAGE_HWEXEC	0x00010	/* H: SX permission */
+#define _PAGE_ACCESSED	0x00020	/* S: Page referenced */
 
 #define _PAGE_ENDIAN	0x00040	/* H: E bit */
 #define _PAGE_GUARDED	0x00080	/* H: G bit */
@@ -307,21 +307,14 @@ extern int icache_44x_need_flush;
 #define _PAGE_WRITETHRU	0x00400	/* H: W bit */
 
 #ifdef CONFIG_PTE_64BIT
-#define _PAGE_DIRTY	0x08000	/* S: Page dirty */
-
 /* ERPN in a PTE never gets cleared, ignore it */
 #define _PTE_NONE_MASK	0xffffffffffff0000ULL
-#else
-#define _PAGE_DIRTY	0x00800	/* S: Page dirty */
 #endif
 
 #define _PMD_PRESENT	0
 #define _PMD_PRESENT_MASK (PAGE_MASK)
 #define _PMD_BAD	(~PAGE_MASK)
 
-/* Until my rework is finished, FSL BookE still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES	1
-
 #elif defined(CONFIG_8xx)
 /* Definitions for 8xx embedded chips. */
 #define _PAGE_PRESENT	0x0001	/* Page is valid */
-- 
cgit v1.2.3


From 0332f000cd010e9db0a04181284b9ac91dac5ea7 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Fri, 11 Jul 2008 14:31:35 -0500
Subject: powerpc/fsl: Minor TLBSYNC cleanup for FSL Book-E

Use the TLBSYNC macro defined in ppc_asm.h rather than our own ifdefs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/kernel/head_fsl_booke.S | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 7d554968b63..3cb52fa0eda 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -151,16 +151,11 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB0 */
 	li	r6,0x04
 	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
+	TLBSYNC
 	/* Invalidate TLB1 */
 	li	r6,0x0c
 	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 /* 3. Setup a temp mapping and jump to it */
 	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
@@ -238,10 +233,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB1 */
 	li	r9,0x0c
 	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 /* 6. Setup KERNELBASE mapping in TLB1[0] */
 	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
@@ -283,10 +275,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB1 */
 	li	r9,0x0c
 	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
-- 
cgit v1.2.3


From ff21f23648d33649fcf3e1e99d03e245f0e1acf8 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 16 Jul 2008 17:47:54 -0500
Subject: powerpc/ep8248e: Unconditionally select PHYLIB for mdio_bitbang

Its possible to build the phylib as a module, however this breaks the
board code because alloc_mdio_bitbang and mdiobus_register are not
available if we build as a module.  These are needed by the board code
since it implements the low level mdio bitbang ops.

So we unconditionally select PHYLIB to ensure its built into the kernel
if we are building in EP8248E support.

Long term we should look at moving the mdio_ops into its own file so it
can be built as a module.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/82xx/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 1c8034bfa79..75eb1ede549 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -30,6 +30,7 @@ config EP8248E
 	select 8272
 	select 8260
 	select FSL_SOC
+	select PHYLIB
 	select MDIO_BITBANG
 	help
 	  This enables support for the Embedded Planet EP8248E board.
-- 
cgit v1.2.3


From 108443cb0ca2402b5561c6777f3a5f6fb2c2922e Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 16 Jul 2008 17:59:03 -0500
Subject: Revert "powerpc/ep8248e: Fix compile problem if !CONFIG_FS_ENET"

This reverts commit e3621ee633810be1079d0fa65ac2c904f53b73fa.

This was not the proper fix.  As Scott Wood said CONFIG_FS_ENET has nothing
to do with the issue.  The proper fix is to select PHYLIB for this board.
---
 arch/powerpc/platforms/82xx/ep8248e.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index 373e993a5ed..d5770fdf7f0 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -59,7 +59,6 @@ static void __init ep8248e_pic_init(void)
 	of_node_put(np);
 }
 
-#ifdef CONFIG_FS_ENET_MDIO_FCC
 static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
 {
 	if (level)
@@ -165,7 +164,6 @@ static struct of_platform_driver ep8248e_mdio_driver = {
 	.probe = ep8248e_mdio_probe,
 	.remove = ep8248e_mdio_remove,
 };
-#endif
 
 struct cpm_pin {
 	int port, pin, flags;
@@ -298,9 +296,7 @@ static  __initdata struct of_device_id of_bus_ids[] = {
 static int __init declare_of_platform_devices(void)
 {
 	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-#ifdef CONFIG_FS_ENET_MDIO_FCC
 	of_register_platform_driver(&ep8248e_mdio_driver);
-#endif
 
 	return 0;
 }
-- 
cgit v1.2.3


From ac8a1014804c23c96e3f757145f73e1351c34365 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 24 Jun 2008 17:35:02 -0500
Subject: powerpc: fix ALSA options in Freescale 85xx and 86xx defconfigs

The defconfigs for Freescale 85xx and 86xx SOCs had bad choices for some
audio related options.  In particular, OSS emulation should be enabled,
and the old ALSA API should be disabled.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/85xx/mpc8544_ds_defconfig | 8 +++++---
 arch/powerpc/configs/85xx/mpc8572_ds_defconfig | 8 +++++---
 arch/powerpc/configs/mpc85xx_defconfig         | 8 +++++---
 arch/powerpc/configs/mpc8641_hpcn_defconfig    | 8 +++++---
 4 files changed, 20 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index 042a85ea7b7..a0583e5119f 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -997,10 +997,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 03627cfebcb..164fd9606ee 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -997,10 +997,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 3efab71a603..fa0170504b8 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1005,10 +1005,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 4a817150739..867b8c0215f 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -991,10 +991,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-- 
cgit v1.2.3


From 4aaf087846f9a1f1ec272393f5cd78f713e24f37 Mon Sep 17 00:00:00 2001
From: Lee Nipper <lee.nipper@freescale.com>
Date: Thu, 17 Jul 2008 15:58:08 +0800
Subject: crypto: talitos - Remove calls to of_node_put

Remove of_node_put calls since there is no corresponding of_node_get.
This patch prevents an exception when talitos is loaded a 2nd time.
This sequence: modprobe talitos; rmmod talitos; modprobe talitos
causes this message: "WARNING: Bad of_node_put() on /soc8349@e0000000/crypto@30000".

Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/talitos.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index b11943dadef..01e6595014e 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1466,9 +1466,6 @@ static int talitos_probe(struct of_device *ofdev,
 		goto err_out;
 	}
 
-	of_node_put(np);
-	np = NULL;
-
 	priv->head_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
 				  GFP_KERNEL);
 	priv->tail_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
@@ -1559,8 +1556,6 @@ static int talitos_probe(struct of_device *ofdev,
 
 err_out:
 	talitos_remove(ofdev);
-	if (np)
-		of_node_put(np);
 
 	return err;
 }
-- 
cgit v1.2.3


From 695ad589698571046d42a4450c2d801486905535 Mon Sep 17 00:00:00 2001
From: Lee Nipper <lee.nipper@freescale.com>
Date: Thu, 17 Jul 2008 16:22:30 +0800
Subject: crypto: talitos - Correct dst != src case handling

Seems that dst == src, but this fixes the logic in case it's not.

Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/talitos.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 01e6595014e..f644fba35c8 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1022,7 +1022,7 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 		dst_nents = src_nents;
 	} else {
 		dst_nents = sg_count(areq->dst, areq->cryptlen + ctx->authsize);
-		dst_nents = (dst_nents == 1) ? 0 : src_nents;
+		dst_nents = (dst_nents == 1) ? 0 : dst_nents;
 	}
 
 	/*
-- 
cgit v1.2.3


From 810fd3f3f621fef9d1ac71b198d830fdeafbc1c3 Mon Sep 17 00:00:00 2001
From: Rene Herman <rene.herman@gmail.com>
Date: Thu, 17 Jul 2008 09:22:29 +0200
Subject: ALSA: ens1370: SRC stands for Sample Rate Converter

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/ens1370.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index fbf1124f7c7..33032a73ecc 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -522,7 +522,7 @@ static unsigned int snd_es1371_wait_src_ready(struct ensoniq * ensoniq)
 			return r;
 		cond_resched();
 	}
-	snd_printk(KERN_ERR "wait source ready timeout 0x%lx [0x%x]\n",
+	snd_printk(KERN_ERR "wait src ready timeout 0x%lx [0x%x]\n",
 		   ES_REG(ensoniq, 1371_SMPRATE), r);
 	return 0;
 }
-- 
cgit v1.2.3


From ec6644d6325b5a38525f1d5b20fd4bf7db05cf2a Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Thu, 17 Jul 2008 20:16:40 +0800
Subject: crypto: talitos - Preempt overflow interrupts

add requests pending/submit count to prevent request queue full
condition by preempting h/w overflow interrupts in software.
We do this due to the delay in the delivery and handling of the
channel overflow error interrupt.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/talitos.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index f644fba35c8..fdb0680f6ff 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -99,6 +99,9 @@ struct talitos_private {
 	/* next channel to be assigned next incoming descriptor */
 	atomic_t last_chan;
 
+	/* per-channel number of requests pending in channel h/w fifo */
+	atomic_t *submit_count;
+
 	/* per-channel request fifo */
 	struct talitos_request **fifo;
 
@@ -263,15 +266,15 @@ static int talitos_submit(struct device *dev, struct talitos_desc *desc,
 
 	spin_lock_irqsave(&priv->head_lock[ch], flags);
 
-	head = priv->head[ch];
-	request = &priv->fifo[ch][head];
-
-	if (request->desc) {
-		/* request queue is full */
+	if (!atomic_inc_not_zero(&priv->submit_count[ch])) {
+		/* h/w fifo is full */
 		spin_unlock_irqrestore(&priv->head_lock[ch], flags);
 		return -EAGAIN;
 	}
 
+	head = priv->head[ch];
+	request = &priv->fifo[ch][head];
+
 	/* map descriptor and save caller data */
 	request->dma_desc = dma_map_single(dev, desc, sizeof(*desc),
 					   DMA_BIDIRECTIONAL);
@@ -335,6 +338,9 @@ static void flush_channel(struct device *dev, int ch, int error, int reset_ch)
 		priv->tail[ch] = (tail + 1) & (priv->fifo_len - 1);
 
 		spin_unlock_irqrestore(&priv->tail_lock[ch], flags);
+
+		atomic_dec(&priv->submit_count[ch]);
+
 		saved_req.callback(dev, saved_req.desc, saved_req.context,
 				   status);
 		/* channel may resume processing in single desc error case */
@@ -1337,6 +1343,7 @@ static int __devexit talitos_remove(struct of_device *ofdev)
 	if (hw_supports(dev, DESC_HDR_SEL0_RNG))
 		talitos_unregister_rng(dev);
 
+	kfree(priv->submit_count);
 	kfree(priv->tail);
 	kfree(priv->head);
 
@@ -1501,6 +1508,16 @@ static int talitos_probe(struct of_device *ofdev,
 		}
 	}
 
+	priv->submit_count = kmalloc(sizeof(int) * priv->num_channels,
+				     GFP_KERNEL);
+	if (!priv->submit_count) {
+		dev_err(dev, "failed to allocate fifo submit count space\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+	for (i = 0; i < priv->num_channels; i++)
+		atomic_set(&priv->submit_count[i], -priv->chfifo_len);
+
 	priv->head = kzalloc(sizeof(int) * priv->num_channels, GFP_KERNEL);
 	priv->tail = kzalloc(sizeof(int) * priv->num_channels, GFP_KERNEL);
 	if (!priv->head || !priv->tail) {
-- 
cgit v1.2.3


From 586725f8604ef16ebbfdd66e73036e162ae00135 Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Thu, 17 Jul 2008 20:19:18 +0800
Subject: crypto: talitos - Fix GFP flag usage

use GFP_ATOMIC when necessary; use atomic_t when allocating submit_count.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/talitos.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index fdb0680f6ff..79fdba2a20c 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1015,6 +1015,8 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 	struct ipsec_esp_edesc *edesc;
 	int src_nents, dst_nents, alloc_len, dma_len;
+	gfp_t flags = areq->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL :
+		      GFP_ATOMIC;
 
 	if (areq->cryptlen + ctx->authsize > TALITOS_MAX_DATA_LEN) {
 		dev_err(ctx->dev, "cryptlen exceeds h/w max limit\n");
@@ -1046,7 +1048,7 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 		alloc_len += icv_stashing ? ctx->authsize : 0;
 	}
 
-	edesc = kmalloc(alloc_len, GFP_DMA);
+	edesc = kmalloc(alloc_len, GFP_DMA | flags);
 	if (!edesc) {
 		dev_err(ctx->dev, "could not allocate edescriptor\n");
 		return ERR_PTR(-ENOMEM);
@@ -1508,7 +1510,7 @@ static int talitos_probe(struct of_device *ofdev,
 		}
 	}
 
-	priv->submit_count = kmalloc(sizeof(int) * priv->num_channels,
+	priv->submit_count = kmalloc(sizeof(atomic_t) * priv->num_channels,
 				     GFP_KERNEL);
 	if (!priv->submit_count) {
 		dev_err(dev, "failed to allocate fifo submit count space\n");
-- 
cgit v1.2.3


From fa86a26795b850cdf4e557898457a63e241c1aa1 Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Thu, 17 Jul 2008 20:20:06 +0800
Subject: crypto: talitos - Stop leaking memory in error path

free edescriptor when returning error (such as -EAGAIN).

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/talitos.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 79fdba2a20c..a81265bbb89 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -880,7 +880,7 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	unsigned int cryptlen = areq->cryptlen;
 	unsigned int authsize = ctx->authsize;
 	unsigned int ivsize;
-	int sg_count;
+	int sg_count, ret;
 
 	/* hmac key */
 	map_single_talitos_ptr(dev, &desc->ptr[0], ctx->authkeylen, &ctx->key,
@@ -984,7 +984,12 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 	map_single_talitos_ptr(dev, &desc->ptr[6], ivsize, ctx->iv, 0,
 			       DMA_FROM_DEVICE);
 
-	return talitos_submit(dev, desc, callback, areq);
+	ret = talitos_submit(dev, desc, callback, areq);
+	if (ret != -EINPROGRESS) {
+		ipsec_esp_unmap(dev, edesc, areq);
+		kfree(edesc);
+	}
+	return ret;
 }
 
 
-- 
cgit v1.2.3


From c0e741d47859fcabb84a37589a4f49801ca8590a Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Thu, 17 Jul 2008 20:20:59 +0800
Subject: crypto: talitos - sparse fix

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/talitos.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index a81265bbb89..681c15f4208 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -848,7 +848,7 @@ static int sg_to_link_tbl(struct scatterlist *sg, int sg_count,
 
 	/* adjust (decrease) last one (or two) entry's len to cryptlen */
 	link_tbl_ptr--;
-	while (link_tbl_ptr->len <= (-cryptlen)) {
+	while (be16_to_cpu(link_tbl_ptr->len) <= (-cryptlen)) {
 		/* Empty this entry, and move to previous one */
 		cryptlen += be16_to_cpu(link_tbl_ptr->len);
 		link_tbl_ptr->len = 0;
-- 
cgit v1.2.3


From 462dba28e1921f19319d11a44b7bb97e72da2a79 Mon Sep 17 00:00:00 2001
From: Rene Herman <rene.herman@gmail.com>
Date: Thu, 17 Jul 2008 14:02:16 +0200
Subject: ALSA: ALSA: ens1370: communicate PCI device to AC97

communicate the ES137x PCI device to the AC97 code for its
subsys_vendor/device values

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/ens1370.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 33032a73ecc..9bf95367c88 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -1629,6 +1629,7 @@ static int __devinit snd_ensoniq_1371_mixer(struct ensoniq *ensoniq,
 	memset(&ac97, 0, sizeof(ac97));
 	ac97.private_data = ensoniq;
 	ac97.private_free = snd_ensoniq_mixer_free_ac97;
+	ac97.pci = ensoniq->pci;
 	ac97.scaps = AC97_SCAP_AUDIO;
 	if ((err = snd_ac97_mixer(pbus, &ac97, &ensoniq->u.es1371.ac97)) < 0)
 		return err;
-- 
cgit v1.2.3


From 2927d6eeca0a5004d81fa5bedbdf3f2b1b842903 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 17 Jul 2008 15:06:50 +0100
Subject: ALSA: ASoC: Refactor DAPM event handler

The DAPM event callback code has many layers of indentation, taking it
over 80 columns. Refactor the code to give less indentation in order to
avoid checkpatch issues on further changes and exploding indentation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/soc-dapm.c | 79 +++++++++++++++++++++++++++-------------------------
 1 file changed, 41 insertions(+), 38 deletions(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 2c87061c2a6..17698ef58df 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -586,45 +586,48 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
 			power_change = (w->power == power) ? 0: 1;
 			w->power = power;
 
+			if (!power_change)
+				continue;
+
 			/* call any power change event handlers */
-			if (power_change) {
-				if (w->event) {
-					pr_debug("power %s event for %s flags %x\n",
-						 w->power ? "on" : "off", w->name, w->event_flags);
-					if (power) {
-						/* power up event */
-						if (w->event_flags & SND_SOC_DAPM_PRE_PMU) {
-							ret = w->event(w,
-								NULL, SND_SOC_DAPM_PRE_PMU);
-							if (ret < 0)
-								return ret;
-						}
-						dapm_update_bits(w);
-						if (w->event_flags & SND_SOC_DAPM_POST_PMU){
-							ret = w->event(w,
-								NULL, SND_SOC_DAPM_POST_PMU);
-							if (ret < 0)
-								return ret;
-						}
-					} else {
-						/* power down event */
-						if (w->event_flags & SND_SOC_DAPM_PRE_PMD) {
-							ret = w->event(w,
-								NULL, SND_SOC_DAPM_PRE_PMD);
-							if (ret < 0)
-								return ret;
-						}
-						dapm_update_bits(w);
-						if (w->event_flags & SND_SOC_DAPM_POST_PMD) {
-							ret = w->event(w,
-								NULL, SND_SOC_DAPM_POST_PMD);
-							if (ret < 0)
-								return ret;
-						}
-					}
-				} else
-					/* no event handler */
-					dapm_update_bits(w);
+			if (w->event)
+				pr_debug("power %s event for %s flags %x\n",
+					 w->power ? "on" : "off",
+					 w->name, w->event_flags);
+
+			/* power up pre event */
+			if (power && w->event &&
+			    (w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
+				ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
+				if (ret < 0)
+					return ret;
+			}
+
+			/* power down pre event */
+			if (!power && w->event &&
+			    (w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
+				ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
+				if (ret < 0)
+					return ret;
+			}
+
+			dapm_update_bits(w);
+
+			/* power up post event */
+			if (power && w->event &&
+			    (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
+				ret = w->event(w,
+					       NULL, SND_SOC_DAPM_POST_PMU);
+				if (ret < 0)
+					return ret;
+			}
+
+			/* power down post event */
+			if (!power && w->event &&
+			    (w->event_flags & SND_SOC_DAPM_POST_PMD)) {
+				ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
+				if (ret < 0)
+					return ret;
 			}
 		}
 	}
-- 
cgit v1.2.3


From 9dd8d812d3b4d208a769ca3cf23a7f9294632d0d Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 17 Jul 2008 15:06:51 +0100
Subject: ALSA: ASoC: Factor PGA DAPM handling into main

This allows pre and post event hooks to be provided for PGA widgets.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/soc-dapm.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 17698ef58df..820347c9ae4 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -523,24 +523,6 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
 				continue;
 			}
 
-			/* programmable gain/attenuation */
-			if (w->id == snd_soc_dapm_pga) {
-				int on;
-				in = is_connected_input_ep(w);
-				dapm_clear_walk(w->codec);
-				out = is_connected_output_ep(w);
-				dapm_clear_walk(w->codec);
-				w->power = on = (out != 0 && in != 0) ? 1 : 0;
-
-				if (!on)
-					dapm_set_pga(w, on); /* lower volume to reduce pops */
-				dapm_update_bits(w);
-				if (on)
-					dapm_set_pga(w, on); /* restore volume from zero */
-
-				continue;
-			}
-
 			/* pre and post event widgets */
 			if (w->id == snd_soc_dapm_pre) {
 				if (!w->event)
@@ -611,8 +593,16 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
 					return ret;
 			}
 
+			/* Lower PGA volume to reduce pops */
+			if (w->id == snd_soc_dapm_pga && !power)
+				dapm_set_pga(w, power);
+
 			dapm_update_bits(w);
 
+			/* Raise PGA volume to reduce pops */
+			if (w->id == snd_soc_dapm_pga && power)
+				dapm_set_pga(w, power);
+
 			/* power up post event */
 			if (power && w->event &&
 			    (w->event_flags & SND_SOC_DAPM_POST_PMU)) {
-- 
cgit v1.2.3


From 62fe8378d949c9a12bc2a5f51cd41fabf70e682c Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Thu, 17 Jul 2008 16:45:11 +0300
Subject: fix avr32 build errors

Commit 7d2be0749a59096a334c94dc48f43294193cb8ed
(atmel-mci: Driver for Atmel on-chip MMC controllers)
causes build errors like:

<--  snip  -->

...
  CC      arch/avr32/boards/atstk1000/atstk1003.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/avr32/boards/atstk1000/atstk1003.c: In function 'atstk1003_init':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/avr32/boards/atstk1000/atstk1003.c:157: error: too few arguments to function 'at32_add_device_mci'
make[2]: *** [arch/avr32/boards/atstk1000/atstk1003.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/boards/atstk1000/atstk1003.c | 2 +-
 arch/avr32/boards/atstk1000/atstk1004.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index ea109f435a8..591fc73b554 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -154,7 +154,7 @@ static int __init atstk1003_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0);
+	at32_add_device_mci(0, NULL);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index c7236df74d7..d9c5e0a2125 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -137,7 +137,7 @@ static int __init atstk1004_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0);
+	at32_add_device_mci(0, NULL);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
 			     fbmem_start, fbmem_size, 0);
-- 
cgit v1.2.3


From 2522d7359301efadfb5744ebd3c623c3af4a7b30 Mon Sep 17 00:00:00 2001
From: Alexander Holler <holler@ahsoftware.de>
Date: Thu, 17 Jul 2008 23:36:15 +0200
Subject: ALSA: hda - Added support for Asus V1Sn

Added the necessary ID for Asus V1Sn to patch_realtek.c
to use ALC861VD_LENOVO on these laptops.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 2807bc840d2..e5f8d3b699e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -12994,6 +12994,7 @@ static struct snd_pci_quirk alc861vd_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_HP),
 	SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST),
 	SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),
+	SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC861VD_LENOVO),
 	SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660VD_3ST_DIG),
 	SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
 	SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba A135", ALC861VD_LENOVO),
-- 
cgit v1.2.3


From 4a5e3638b11978262ab76bbb2062e57fefaaedba Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Tue, 15 Jul 2008 09:42:57 -0600
Subject: ACPI: stop complaints about interrupt link End Tags and blank IRQ
 descriptors

Silently ignore _PRS End Tags.  We already ignore Start Dependent Functions in
_PRS, and we already ignore End Tags in _CRS, so we might as well ignore End
Tags in _PRS as well.

Silently ignore _PRS IRQ descriptors that mention no interrupts.  The spec
allows this (section 6.4.2.1 in ACPI 3.0b spec), and it probably means the
interrupt link can't be configured at all.

This patch doesn't change any functional behavior; it just removes confusing
complaints like these:

    ACPI: Blank IRQ resource
    ACPI: Resource is not an IRQ entry

when parsing _PRS data "23 00 00 18 79 00" from an IBM xSeries 335 dual
Pentium IV Xeon 2.40 GHz machine.  For more details, see
    http://bugzilla.kernel.org/show_bug.cgi?id=11049

The "23 00 00 18" part is a three-byte-long small IRQ resource with no bits set
in the IRQ mask ("00 00"), and level-triggered, active low, shareable ("18").

The "79 00" is an End Tag (type 0x7).  It is superfluous since there is no
Start Dependent Function tag and there are no resources after it, but it is
harmless.

Thanks to Gabriele Trombetti <g.trombetti.lkrnl1213@logicschema.com>
(aka Kurk) for reporting this and testing the patch.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/pci_link.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 233c40c5168..89f3b2abfdc 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -113,20 +113,23 @@ acpi_pci_link_check_possible(struct acpi_resource *resource, void *context)
 
 	switch (resource->type) {
 	case ACPI_RESOURCE_TYPE_START_DEPENDENT:
+	case ACPI_RESOURCE_TYPE_END_TAG:
 		return AE_OK;
 	case ACPI_RESOURCE_TYPE_IRQ:
 		{
 			struct acpi_resource_irq *p = &resource->data.irq;
 			if (!p || !p->interrupt_count) {
-				printk(KERN_WARNING PREFIX "Blank IRQ resource\n");
+				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+						  "Blank _PRS IRQ resource\n"));
 				return AE_OK;
 			}
 			for (i = 0;
 			     (i < p->interrupt_count
 			      && i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
 				if (!p->interrupts[i]) {
-					printk(KERN_WARNING PREFIX "Invalid IRQ %d\n",
-						      p->interrupts[i]);
+					printk(KERN_WARNING PREFIX
+					       "Invalid _PRS IRQ %d\n",
+					       p->interrupts[i]);
 					continue;
 				}
 				link->irq.possible[i] = p->interrupts[i];
@@ -143,15 +146,16 @@ acpi_pci_link_check_possible(struct acpi_resource *resource, void *context)
 			    &resource->data.extended_irq;
 			if (!p || !p->interrupt_count) {
 				printk(KERN_WARNING PREFIX
-					      "Blank EXT IRQ resource\n");
+					      "Blank _PRS EXT IRQ resource\n");
 				return AE_OK;
 			}
 			for (i = 0;
 			     (i < p->interrupt_count
 			      && i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) {
 				if (!p->interrupts[i]) {
-					printk(KERN_WARNING PREFIX "Invalid IRQ %d\n",
-						      p->interrupts[i]);
+					printk(KERN_WARNING PREFIX
+					       "Invalid _PRS IRQ %d\n",
+					       p->interrupts[i]);
 					continue;
 				}
 				link->irq.possible[i] = p->interrupts[i];
@@ -163,7 +167,8 @@ acpi_pci_link_check_possible(struct acpi_resource *resource, void *context)
 			break;
 		}
 	default:
-		printk(KERN_ERR PREFIX "Resource is not an IRQ entry\n");
+		printk(KERN_ERR PREFIX "_PRS resource type 0x%x isn't an IRQ\n",
+		       resource->type);
 		return AE_OK;
 	}
 
@@ -199,6 +204,9 @@ acpi_pci_link_check_current(struct acpi_resource *resource, void *context)
 
 
 	switch (resource->type) {
+	case ACPI_RESOURCE_TYPE_START_DEPENDENT:
+	case ACPI_RESOURCE_TYPE_END_TAG:
+		return AE_OK;
 	case ACPI_RESOURCE_TYPE_IRQ:
 		{
 			struct acpi_resource_irq *p = &resource->data.irq;
@@ -208,7 +216,7 @@ acpi_pci_link_check_current(struct acpi_resource *resource, void *context)
 				 * particularly those those w/ _STA disabled
 				 */
 				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-						  "Blank IRQ resource\n"));
+						  "Blank _CRS IRQ resource\n"));
 				return AE_OK;
 			}
 			*irq = p->interrupts[0];
@@ -224,7 +232,7 @@ acpi_pci_link_check_current(struct acpi_resource *resource, void *context)
 				 * return at least 1 IRQ
 				 */
 				printk(KERN_WARNING PREFIX
-					      "Blank EXT IRQ resource\n");
+					      "Blank _CRS EXT IRQ resource\n");
 				return AE_OK;
 			}
 			*irq = p->interrupts[0];
@@ -232,10 +240,11 @@ acpi_pci_link_check_current(struct acpi_resource *resource, void *context)
 		}
 		break;
 	default:
-		printk(KERN_ERR PREFIX "Resource %d isn't an IRQ\n", resource->type);
-	case ACPI_RESOURCE_TYPE_END_TAG:
+		printk(KERN_ERR PREFIX "_CRS resource type 0x%x isn't an IRQ\n",
+		       resource->type);
 		return AE_OK;
 	}
+
 	return AE_CTRL_TERMINATE;
 }
 
-- 
cgit v1.2.3


From c2c789057f075022658b38b498755c29c1ba8055 Mon Sep 17 00:00:00 2001
From: Zhao Yakui <yakui.zhao@intel.com>
Date: Thu, 17 Jul 2008 10:46:05 +0800
Subject: ACPI: Ignore _BQC object when registering backlight device

According to acpi spec , the objectes of  _BCL and _BCM are required if
integrated LCD is present and supports brightness level and the _BQC is
the optional object. So the _BQC object will be ignored when the backlight
device is registered.
At the same time when there is no _BQC object, the current brightness will be
set to the maximum.

http://bugzilla.kernel.org/show_bug.cgi?id=10206

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui  <rui.zhang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/video.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 64c889331f3..e32b6c14d92 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -741,7 +741,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 
 	max_level = acpi_video_init_brightness(device);
 
-	if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){
+	if (device->cap._BCL && device->cap._BCM && max_level > 0) {
 		int result;
 		static int count = 0;
 		char *name;
@@ -753,7 +753,17 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		device->backlight = backlight_device_register(name,
 			NULL, device, &acpi_backlight_ops);
 		device->backlight->props.max_brightness = device->brightness->count-3;
-		device->backlight->props.brightness = acpi_video_get_brightness(device->backlight);
+		/*
+		 * If there exists the _BQC object, the _BQC object will be
+		 * called to get the current backlight brightness. Otherwise
+		 * the brightness will be set to the maximum.
+		 */
+		if (device->cap._BQC)
+			device->backlight->props.brightness =
+				acpi_video_get_brightness(device->backlight);
+		else
+			device->backlight->props.brightness =
+				device->backlight->props.max_brightness;
 		backlight_update_status(device->backlight);
 		kfree(name);
 
-- 
cgit v1.2.3


From ea51011a27db48ea0a80a5e20de3969b292d5d4d Mon Sep 17 00:00:00 2001
From: Zhao Yakui <yakui.zhao@intel.com>
Date: Mon, 14 Jul 2008 15:14:03 +0800
Subject: ACPI : Set FAN device to correct state in boot phase

Subject:ACPI: Set FAN device to correct state in boot phase
From: Zhao Yakui <yakui.zhao@intel.com>

On some laptops when ACPI FAN driver is loaded, maybe the FAN device will be
turned on. But if the temperature is below the threshold, the corresponding
FAN device should be turned off in the course of loading thermal driver.

So it is necessary to set the FAN device to the correct state in course of loading
the thermal driver.

http://bugzilla.kernel.org/show_bug.cgi?id=8049

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/thermal.c | 43 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 84c795fb9b1..9adfd180df6 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -769,6 +769,47 @@ static void acpi_thermal_run(unsigned long data)
 		acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data);
 }
 
+static void acpi_thermal_active_off(void *data)
+{
+	int result = 0;
+	struct acpi_thermal *tz = data;
+	int i = 0;
+	int j = 0;
+	struct acpi_thermal_active *active = NULL;
+
+	if (!tz) {
+		printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
+		return;
+	}
+
+	result = acpi_thermal_get_temperature(tz);
+	if (result)
+		return;
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		active = &(tz->trips.active[i]);
+		if (!active || !active->flags.valid)
+			break;
+		if (tz->temperature >= active->temperature) {
+			/*
+			 * If the thermal temperature is greater than the
+			 * active threshod, unnecessary to turn off the
+			 * the active cooling device.
+			 */
+			continue;
+		}
+		/*
+		 * Below Threshold?
+		 * ----------------
+		 * Turn OFF all cooling devices associated with this
+		 * threshold.
+		 */
+		for (j = 0; j < active->devices.count; j++)
+			result = acpi_bus_set_power(active->devices.handles[j],
+						    ACPI_STATE_D3);
+	}
+}
+
 static void acpi_thermal_check(void *data)
 {
 	int result = 0;
@@ -1624,6 +1665,8 @@ static int acpi_thermal_add(struct acpi_device *device)
 
 	init_timer(&tz->timer);
 
+	acpi_thermal_active_off(tz);
+
 	acpi_thermal_check(tz);
 
 	status = acpi_install_notify_handler(device->handle,
-- 
cgit v1.2.3


From b1d77fae0c429d1be84ca0c9e627d9ab0e2a6d0b Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Fri, 18 Jul 2008 01:42:20 +0200
Subject: Revert "Fix FADT parsing"

This reverts commit 01a5bba576b9364b33f61f0cd9fa70c2cf5535e2.

There seem to be some FADTs around with bogus information
in the v2 fields. Revert this patch for now until
this can be properly resolved.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/tables/tbfadt.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c
index ccb5b64bbef..a4a41ba2484 100644
--- a/drivers/acpi/tables/tbfadt.c
+++ b/drivers/acpi/tables/tbfadt.c
@@ -124,7 +124,7 @@ static struct acpi_fadt_info fadt_info_table[] = {
 
 static void inline
 acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
-			     u8 byte_width, u64 address)
+			     u8 bit_width, u64 address)
 {
 
 	/*
@@ -136,7 +136,7 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
 	/* All other fields are byte-wide */
 
 	generic_address->space_id = ACPI_ADR_SPACE_SYSTEM_IO;
-	generic_address->bit_width = byte_width << 3;
+	generic_address->bit_width = bit_width;
 	generic_address->bit_offset = 0;
 	generic_address->access_width = 0;
 }
@@ -343,11 +343,9 @@ static void acpi_tb_convert_fadt(void)
 	 *
 	 * The PM event blocks are split into two register blocks, first is the
 	 * PM Status Register block, followed immediately by the PM Enable Register
-	 * block. Each is of length (xpm1x_event_block.bit_width/2)
+	 * block. Each is of length (pm1_event_length/2)
 	 */
-	WARN_ON(ACPI_MOD_16(acpi_gbl_FADT.xpm1a_event_block.bit_width));
-	pm1_register_length = (u8) ACPI_DIV_16(acpi_gbl_FADT
-					       .xpm1a_event_block.bit_width);
+	pm1_register_length = (u8) ACPI_DIV_2(acpi_gbl_FADT.pm1_event_length);
 
 	/* The PM1A register block is required */
 
@@ -362,17 +360,14 @@ static void acpi_tb_convert_fadt(void)
 	/* The PM1B register block is optional, ignore if not present */
 
 	if (acpi_gbl_FADT.xpm1b_event_block.address) {
-		WARN_ON(ACPI_MOD_16(acpi_gbl_FADT.xpm1b_event_block.bit_width));
-		pm1_register_length = (u8) ACPI_DIV_16(acpi_gbl_FADT
-						       .xpm1b_event_block
-						       .bit_width);
 		acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
 					     pm1_register_length,
 					     (acpi_gbl_FADT.xpm1b_event_block.
 					      address + pm1_register_length));
 		/* Don't forget to copy space_id of the GAS */
 		acpi_gbl_xpm1b_enable.space_id =
-		    acpi_gbl_FADT.xpm1b_event_block.space_id;
+		    acpi_gbl_FADT.xpm1a_event_block.space_id;
+
 	}
 }
 
-- 
cgit v1.2.3


From e1469c34eb623cd1945ef09bfd7de7bc2f9ff6b3 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Fri, 18 Jul 2008 01:43:08 +0200
Subject: Revert "dock: bay: Don't call acpi_walk_namespace() when ACPI is
 disabled."

Revert double commit by mistake. Noticed by Thomas Gleixner.

This reverts commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/bay.c  | 3 ---
 drivers/acpi/dock.c | 3 ---
 2 files changed, 6 deletions(-)

diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c
index e6caf5d42e0..61b6c5beb2d 100644
--- a/drivers/acpi/bay.c
+++ b/drivers/acpi/bay.c
@@ -377,9 +377,6 @@ static int __init bay_init(void)
 
 	INIT_LIST_HEAD(&drive_bays);
 
-	if (acpi_disabled)
-		return -ENODEV;
-
 	if (acpi_disabled)
 		return -ENODEV;
 
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 1e872e79db3..bb7c51f712b 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -917,9 +917,6 @@ static int __init dock_init(void)
 
 	dock_station = NULL;
 
-	if (acpi_disabled)
-		return 0;
-
 	if (acpi_disabled)
 		return 0;
 
-- 
cgit v1.2.3


From 20fc190b0ef58bf8b3b0bff9de122083956f82ec Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Thu, 17 Jul 2008 17:59:47 -0700
Subject: async_tx: list_for_each_entry_rcu() cleanup

In the rcu update side, don't use list_for_each_entry_rcu().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 crypto/async_tx/async_tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c
index c6e772fc5cc..9325c61208a 100644
--- a/crypto/async_tx/async_tx.c
+++ b/crypto/async_tx/async_tx.c
@@ -294,7 +294,7 @@ dma_channel_add_remove(struct dma_client *client,
 	case DMA_RESOURCE_REMOVED:
 		found = 0;
 		spin_lock_irqsave(&async_tx_lock, flags);
-		list_for_each_entry_rcu(ref, &async_tx_master_list, node)
+		list_for_each_entry(ref, &async_tx_master_list, node)
 			if (ref->chan == chan) {
 				/* permit backing devices to go away */
 				dma_chan_put(ref->chan);
-- 
cgit v1.2.3


From 1e55db2d6bdef92abc981b68673564e63c80da4d Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Wed, 16 Jul 2008 19:44:56 -0700
Subject: async_tx: ensure the xor destination buffer remains dma-mapped

When the number of source buffers for an xor operation exceeds the hardware
channel maximum async_xor creates a chain of dependent operations.  The result
of one operation is reused as an input to the next to continue the xor
calculation.  The destination buffer should remain mapped for the duration of
the entire chain.  To provide this guarantee the code must no longer be allowed
to fallback to the synchronous path as this will preclude the buffer from being
unmapped, i.e. the dma-driver will potentially miss the descriptor with
!DMA_COMPL_SKIP_DEST_UNMAP.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 crypto/async_tx/async_xor.c | 244 ++++++++++++++++++++------------------------
 1 file changed, 113 insertions(+), 131 deletions(-)

diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 3a0dddca5a1..1fcf45ac81e 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -35,72 +35,118 @@
  * 	when CONFIG_DMA_ENGINE=n
  */
 static __always_inline struct dma_async_tx_descriptor *
-do_async_xor(struct dma_device *device,
-	struct dma_chan *chan, struct page *dest, struct page **src_list,
-	unsigned int offset, unsigned int src_cnt, size_t len,
-	enum async_tx_flags flags, struct dma_async_tx_descriptor *depend_tx,
-	dma_async_tx_callback cb_fn, void *cb_param)
+do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
+	     unsigned int offset, int src_cnt, size_t len,
+	     enum async_tx_flags flags,
+	     struct dma_async_tx_descriptor *depend_tx,
+	     dma_async_tx_callback cb_fn, void *cb_param)
 {
-	dma_addr_t dma_dest;
+	struct dma_device *dma = chan->device;
 	dma_addr_t *dma_src = (dma_addr_t *) src_list;
-	struct dma_async_tx_descriptor *tx;
+	struct dma_async_tx_descriptor *tx = NULL;
+	int src_off = 0;
 	int i;
-	unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
-
-	pr_debug("%s: len: %zu\n", __func__, len);
-
-	dma_dest = dma_map_page(device->dev, dest, offset, len,
-				DMA_FROM_DEVICE);
+	dma_async_tx_callback _cb_fn;
+	void *_cb_param;
+	enum async_tx_flags async_flags;
+	enum dma_ctrl_flags dma_flags;
+	int xor_src_cnt;
+	dma_addr_t dma_dest;
 
+	dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_FROM_DEVICE);
 	for (i = 0; i < src_cnt; i++)
-		dma_src[i] = dma_map_page(device->dev, src_list[i], offset,
+		dma_src[i] = dma_map_page(dma->dev, src_list[i], offset,
 					  len, DMA_TO_DEVICE);
 
-	/* Since we have clobbered the src_list we are committed
-	 * to doing this asynchronously.  Drivers force forward progress
-	 * in case they can not provide a descriptor
-	 */
-	tx = device->device_prep_dma_xor(chan, dma_dest, dma_src, src_cnt, len,
-					 dma_prep_flags);
-	if (!tx) {
-		if (depend_tx)
+	while (src_cnt) {
+		async_flags = flags;
+		dma_flags = 0;
+		xor_src_cnt = min(src_cnt, dma->max_xor);
+		/* if we are submitting additional xors, leave the chain open,
+		 * clear the callback parameters, and leave the destination
+		 * buffer mapped
+		 */
+		if (src_cnt > xor_src_cnt) {
+			async_flags &= ~ASYNC_TX_ACK;
+			dma_flags = DMA_COMPL_SKIP_DEST_UNMAP;
+			_cb_fn = NULL;
+			_cb_param = NULL;
+		} else {
+			_cb_fn = cb_fn;
+			_cb_param = cb_param;
+		}
+		if (_cb_fn)
+			dma_flags |= DMA_PREP_INTERRUPT;
+
+		/* Since we have clobbered the src_list we are committed
+		 * to doing this asynchronously.  Drivers force forward progress
+		 * in case they can not provide a descriptor
+		 */
+		tx = dma->device_prep_dma_xor(chan, dma_dest, &dma_src[src_off],
+					      xor_src_cnt, len, dma_flags);
+
+		if (unlikely(!tx && depend_tx))
 			dma_wait_for_async_tx(depend_tx);
 
-		while (!tx)
-			tx = device->device_prep_dma_xor(chan, dma_dest,
-							 dma_src, src_cnt, len,
-							 dma_prep_flags);
-	}
+		/* spin wait for the preceeding transactions to complete */
+		while (unlikely(!tx))
+			tx = dma->device_prep_dma_xor(chan, dma_dest,
+						      &dma_src[src_off],
+						      xor_src_cnt, len,
+						      dma_flags);
+
+		async_tx_submit(chan, tx, async_flags, depend_tx, _cb_fn,
+				_cb_param);
+
+		depend_tx = tx;
+		flags |= ASYNC_TX_DEP_ACK;
+
+		if (src_cnt > xor_src_cnt) {
+			/* drop completed sources */
+			src_cnt -= xor_src_cnt;
+			src_off += xor_src_cnt;
 
-	async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
+			/* use the intermediate result a source */
+			dma_src[--src_off] = dma_dest;
+			src_cnt++;
+		} else
+			break;
+	}
 
 	return tx;
 }
 
 static void
 do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset,
-	unsigned int src_cnt, size_t len, enum async_tx_flags flags,
-	struct dma_async_tx_descriptor *depend_tx,
-	dma_async_tx_callback cb_fn, void *cb_param)
+	    int src_cnt, size_t len, enum async_tx_flags flags,
+	    struct dma_async_tx_descriptor *depend_tx,
+	    dma_async_tx_callback cb_fn, void *cb_param)
 {
-	void *_dest;
 	int i;
-
-	pr_debug("%s: len: %zu\n", __func__, len);
+	int xor_src_cnt;
+	int src_off = 0;
+	void *dest_buf;
+	void **srcs = (void **) src_list;
 
 	/* reuse the 'src_list' array to convert to buffer pointers */
 	for (i = 0; i < src_cnt; i++)
-		src_list[i] = (struct page *)
-			(page_address(src_list[i]) + offset);
+		srcs[i] = page_address(src_list[i]) + offset;
 
 	/* set destination address */
-	_dest = page_address(dest) + offset;
+	dest_buf = page_address(dest) + offset;
 
 	if (flags & ASYNC_TX_XOR_ZERO_DST)
-		memset(_dest, 0, len);
+		memset(dest_buf, 0, len);
+
+	while (src_cnt > 0) {
+		/* process up to 'MAX_XOR_BLOCKS' sources */
+		xor_src_cnt = min(src_cnt, MAX_XOR_BLOCKS);
+		xor_blocks(xor_src_cnt, len, dest_buf, &srcs[src_off]);
 
-	xor_blocks(src_cnt, len, _dest,
-		(void **) src_list);
+		/* drop completed sources */
+		src_cnt -= xor_src_cnt;
+		src_off += xor_src_cnt;
+	}
 
 	async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
 }
@@ -132,106 +178,42 @@ async_xor(struct page *dest, struct page **src_list, unsigned int offset,
 	struct dma_chan *chan = async_tx_find_channel(depend_tx, DMA_XOR,
 						      &dest, 1, src_list,
 						      src_cnt, len);
-	struct dma_device *device = chan ? chan->device : NULL;
-	struct dma_async_tx_descriptor *tx = NULL;
-	dma_async_tx_callback _cb_fn;
-	void *_cb_param;
-	unsigned long local_flags;
-	int xor_src_cnt;
-	int i = 0, src_off = 0;
-
 	BUG_ON(src_cnt <= 1);
 
-	while (src_cnt) {
-		local_flags = flags;
-		if (device) { /* run the xor asynchronously */
-			xor_src_cnt = min(src_cnt, device->max_xor);
-			/* if we are submitting additional xors
-			 * only set the callback on the last transaction
-			 */
-			if (src_cnt > xor_src_cnt) {
-				local_flags &= ~ASYNC_TX_ACK;
-				_cb_fn = NULL;
-				_cb_param = NULL;
-			} else {
-				_cb_fn = cb_fn;
-				_cb_param = cb_param;
-			}
-
-			tx = do_async_xor(device, chan, dest,
-					  &src_list[src_off], offset,
-					  xor_src_cnt, len, local_flags,
-					  depend_tx, _cb_fn, _cb_param);
-		} else { /* run the xor synchronously */
-			/* in the sync case the dest is an implied source
-			 * (assumes the dest is at the src_off index)
-			 */
-			if (flags & ASYNC_TX_XOR_DROP_DST) {
-				src_cnt--;
-				src_off++;
-			}
-
-			/* process up to 'MAX_XOR_BLOCKS' sources */
-			xor_src_cnt = min(src_cnt, MAX_XOR_BLOCKS);
+	if (chan) {
+		/* run the xor asynchronously */
+		pr_debug("%s (async): len: %zu\n", __func__, len);
 
-			/* if we are submitting additional xors
-			 * only set the callback on the last transaction
-			 */
-			if (src_cnt > xor_src_cnt) {
-				local_flags &= ~ASYNC_TX_ACK;
-				_cb_fn = NULL;
-				_cb_param = NULL;
-			} else {
-				_cb_fn = cb_fn;
-				_cb_param = cb_param;
-			}
-
-			/* wait for any prerequisite operations */
-			if (depend_tx) {
-				/* if ack is already set then we cannot be sure
-				 * we are referring to the correct operation
-				 */
-				BUG_ON(async_tx_test_ack(depend_tx));
-				if (dma_wait_for_async_tx(depend_tx) ==
-					DMA_ERROR)
-					panic("%s: DMA_ERROR waiting for "
-						"depend_tx\n",
-						__func__);
-			}
-
-			do_sync_xor(dest, &src_list[src_off], offset,
-				xor_src_cnt, len, local_flags, depend_tx,
-				_cb_fn, _cb_param);
-		}
+		return do_async_xor(chan, dest, src_list, offset, src_cnt, len,
+				    flags, depend_tx, cb_fn, cb_param);
+	} else {
+		/* run the xor synchronously */
+		pr_debug("%s (sync): len: %zu\n", __func__, len);
 
-		/* the previous tx is hidden from the client,
-		 * so ack it
+		/* in the sync case the dest is an implied source
+		 * (assumes the dest is the first source)
 		 */
-		if (i && depend_tx)
-			async_tx_ack(depend_tx);
-
-		depend_tx = tx;
+		if (flags & ASYNC_TX_XOR_DROP_DST) {
+			src_cnt--;
+			src_list++;
+		}
 
-		if (src_cnt > xor_src_cnt) {
-			/* drop completed sources */
-			src_cnt -= xor_src_cnt;
-			src_off += xor_src_cnt;
+		/* wait for any prerequisite operations */
+		if (depend_tx) {
+			/* if ack is already set then we cannot be sure
+			 * we are referring to the correct operation
+			 */
+			BUG_ON(async_tx_test_ack(depend_tx));
+			if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
+				panic("%s: DMA_ERROR waiting for depend_tx\n",
+					__func__);
+		}
 
-			/* unconditionally preserve the destination */
-			flags &= ~ASYNC_TX_XOR_ZERO_DST;
+		do_sync_xor(dest, src_list, offset, src_cnt, len,
+			    flags, depend_tx, cb_fn, cb_param);
 
-			/* use the intermediate result a source, but remember
-			 * it's dropped, because it's implied, in the sync case
-			 */
-			src_list[--src_off] = dest;
-			src_cnt++;
-			flags |= ASYNC_TX_XOR_DROP_DST;
-		} else
-			src_cnt = 0;
-		i++;
+		return NULL;
 	}
-
-	return tx;
 }
 EXPORT_SYMBOL_GPL(async_xor);
 
-- 
cgit v1.2.3


From 669ab0b210f9bd15d94d4d6a49ae13366a85e4da Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 17 Jul 2008 17:59:55 -0700
Subject: async_tx: fix handling of the "out of descriptor" condition in
 async_xor

Ensure forward progress is made when a dmaengine driver is unable to
allocate an xor descriptor by breaking the dependency chain with
async_tx_quisce() and issue any pending descriptors.

Tested with iop-adma by setting device->max_xor = 2 to force multiple
calls to device_prep_dma_xor for each call to async_xor and limiting the
descriptor slot pool to 5.  Discovered that the minimum descriptor pool
size for iop-adma is 2 * iop_chan_xor_slot_cnt(device->max_xor) + 1.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 crypto/async_tx/async_xor.c | 32 ++++++++++++++++++++++++++------
 1 file changed, 26 insertions(+), 6 deletions(-)

diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 1fcf45ac81e..19d16e452bc 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -30,6 +30,24 @@
 #include <linux/raid/xor.h>
 #include <linux/async_tx.h>
 
+/**
+ * async_tx_quiesce - ensure tx is complete and freeable upon return
+ * @tx - transaction to quiesce
+ */
+static void async_tx_quiesce(struct dma_async_tx_descriptor **tx)
+{
+	if (*tx) {
+		/* if ack is already set then we cannot be sure
+		 * we are referring to the correct operation
+		 */
+		BUG_ON(async_tx_test_ack(*tx));
+		if (dma_wait_for_async_tx(*tx) == DMA_ERROR)
+			panic("DMA_ERROR waiting for transaction\n");
+		async_tx_ack(*tx);
+		*tx = NULL;
+       }
+}
+
 /* do_async_xor - dma map the pages and perform the xor with an engine.
  * 	This routine is marked __always_inline so it can be compiled away
  * 	when CONFIG_DMA_ENGINE=n
@@ -85,15 +103,17 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
 		tx = dma->device_prep_dma_xor(chan, dma_dest, &dma_src[src_off],
 					      xor_src_cnt, len, dma_flags);
 
-		if (unlikely(!tx && depend_tx))
-			dma_wait_for_async_tx(depend_tx);
+		if (unlikely(!tx))
+			async_tx_quiesce(&depend_tx);
 
 		/* spin wait for the preceeding transactions to complete */
-		while (unlikely(!tx))
+		while (unlikely(!tx)) {
+			dma_async_issue_pending(chan);
 			tx = dma->device_prep_dma_xor(chan, dma_dest,
 						      &dma_src[src_off],
 						      xor_src_cnt, len,
 						      dma_flags);
+		}
 
 		async_tx_submit(chan, tx, async_flags, depend_tx, _cb_fn,
 				_cb_param);
@@ -267,11 +287,11 @@ async_xor_zero_sum(struct page *dest, struct page **src_list,
 		tx = device->device_prep_dma_zero_sum(chan, dma_src, src_cnt,
 						      len, result,
 						      dma_prep_flags);
-		if (!tx) {
-			if (depend_tx)
-				dma_wait_for_async_tx(depend_tx);
+		if (unlikely(!tx)) {
+			async_tx_quiesce(&depend_tx);
 
 			while (!tx)
+				dma_async_issue_pending(chan);
 				tx = device->device_prep_dma_zero_sum(chan,
 					dma_src, src_cnt, len, result,
 					dma_prep_flags);
-- 
cgit v1.2.3


From d2c52b7983b95bb3fc2a784e479f832f142d4523 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 17 Jul 2008 17:59:55 -0700
Subject: async_tx: export async_tx_quiesce

Replace open coded "wait and acknowledge" instances with async_tx_quiesce.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 crypto/async_tx/async_memcpy.c | 10 +---------
 crypto/async_tx/async_memset.c | 10 +---------
 crypto/async_tx/async_tx.c     | 29 ++++++++++++++++++++---------
 crypto/async_tx/async_xor.c    | 37 ++-----------------------------------
 include/linux/async_tx.h       |  2 ++
 5 files changed, 26 insertions(+), 62 deletions(-)

diff --git a/crypto/async_tx/async_memcpy.c b/crypto/async_tx/async_memcpy.c
index a5eda80e842..06a7f4be973 100644
--- a/crypto/async_tx/async_memcpy.c
+++ b/crypto/async_tx/async_memcpy.c
@@ -73,15 +73,7 @@ async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
 		pr_debug("%s: (sync) len: %zu\n", __func__, len);
 
 		/* wait for any prerequisite operations */
-		if (depend_tx) {
-			/* if ack is already set then we cannot be sure
-			 * we are referring to the correct operation
-			 */
-			BUG_ON(async_tx_test_ack(depend_tx));
-			if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
-				panic("%s: DMA_ERROR waiting for depend_tx\n",
-					__func__);
-		}
+		async_tx_quiesce(&depend_tx);
 
 		dest_buf = kmap_atomic(dest, KM_USER0) + dest_offset;
 		src_buf = kmap_atomic(src, KM_USER1) + src_offset;
diff --git a/crypto/async_tx/async_memset.c b/crypto/async_tx/async_memset.c
index 27a97dc90a7..d48ed22ed1c 100644
--- a/crypto/async_tx/async_memset.c
+++ b/crypto/async_tx/async_memset.c
@@ -72,15 +72,7 @@ async_memset(struct page *dest, int val, unsigned int offset,
 		dest_buf = (void *) (((char *) page_address(dest)) + offset);
 
 		/* wait for any prerequisite operations */
-		if (depend_tx) {
-			/* if ack is already set then we cannot be sure
-			 * we are referring to the correct operation
-			 */
-			BUG_ON(async_tx_test_ack(depend_tx));
-			if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
-				panic("%s: DMA_ERROR waiting for depend_tx\n",
-					__func__);
-		}
+		async_tx_quiesce(&depend_tx);
 
 		memset(dest_buf, val, len);
 
diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c
index 9325c61208a..78a61e7f631 100644
--- a/crypto/async_tx/async_tx.c
+++ b/crypto/async_tx/async_tx.c
@@ -607,15 +607,7 @@ async_trigger_callback(enum async_tx_flags flags,
 		pr_debug("%s: (sync)\n", __func__);
 
 		/* wait for any prerequisite operations */
-		if (depend_tx) {
-			/* if ack is already set then we cannot be sure
-			 * we are referring to the correct operation
-			 */
-			BUG_ON(async_tx_test_ack(depend_tx));
-			if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
-				panic("%s: DMA_ERROR waiting for depend_tx\n",
-					__func__);
-		}
+		async_tx_quiesce(&depend_tx);
 
 		async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
 	}
@@ -624,6 +616,25 @@ async_trigger_callback(enum async_tx_flags flags,
 }
 EXPORT_SYMBOL_GPL(async_trigger_callback);
 
+/**
+ * async_tx_quiesce - ensure tx is complete and freeable upon return
+ * @tx - transaction to quiesce
+ */
+void async_tx_quiesce(struct dma_async_tx_descriptor **tx)
+{
+	if (*tx) {
+		/* if ack is already set then we cannot be sure
+		 * we are referring to the correct operation
+		 */
+		BUG_ON(async_tx_test_ack(*tx));
+		if (dma_wait_for_async_tx(*tx) == DMA_ERROR)
+			panic("DMA_ERROR waiting for transaction\n");
+		async_tx_ack(*tx);
+		*tx = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(async_tx_quiesce);
+
 module_init(async_tx_init);
 module_exit(async_tx_exit);
 
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 19d16e452bc..689ecce73ee 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -30,24 +30,6 @@
 #include <linux/raid/xor.h>
 #include <linux/async_tx.h>
 
-/**
- * async_tx_quiesce - ensure tx is complete and freeable upon return
- * @tx - transaction to quiesce
- */
-static void async_tx_quiesce(struct dma_async_tx_descriptor **tx)
-{
-	if (*tx) {
-		/* if ack is already set then we cannot be sure
-		 * we are referring to the correct operation
-		 */
-		BUG_ON(async_tx_test_ack(*tx));
-		if (dma_wait_for_async_tx(*tx) == DMA_ERROR)
-			panic("DMA_ERROR waiting for transaction\n");
-		async_tx_ack(*tx);
-		*tx = NULL;
-       }
-}
-
 /* do_async_xor - dma map the pages and perform the xor with an engine.
  * 	This routine is marked __always_inline so it can be compiled away
  * 	when CONFIG_DMA_ENGINE=n
@@ -219,15 +201,7 @@ async_xor(struct page *dest, struct page **src_list, unsigned int offset,
 		}
 
 		/* wait for any prerequisite operations */
-		if (depend_tx) {
-			/* if ack is already set then we cannot be sure
-			 * we are referring to the correct operation
-			 */
-			BUG_ON(async_tx_test_ack(depend_tx));
-			if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
-				panic("%s: DMA_ERROR waiting for depend_tx\n",
-					__func__);
-		}
+		async_tx_quiesce(&depend_tx);
 
 		do_sync_xor(dest, src_list, offset, src_cnt, len,
 			    flags, depend_tx, cb_fn, cb_param);
@@ -309,17 +283,10 @@ async_xor_zero_sum(struct page *dest, struct page **src_list,
 		tx = async_xor(dest, src_list, offset, src_cnt, len, xor_flags,
 			depend_tx, NULL, NULL);
 
-		if (tx) {
-			if (dma_wait_for_async_tx(tx) == DMA_ERROR)
-				panic("%s: DMA_ERROR waiting for tx\n",
-					__func__);
-			async_tx_ack(tx);
-		}
+		async_tx_quiesce(&tx);
 
 		*result = page_is_zero(dest, offset, len) ? 0 : 1;
 
-		tx = NULL;
-
 		async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
 	}
 
diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h
index eb640f0acfa..9f0e7bd5bdc 100644
--- a/include/linux/async_tx.h
+++ b/include/linux/async_tx.h
@@ -152,4 +152,6 @@ struct dma_async_tx_descriptor *
 async_trigger_callback(enum async_tx_flags flags,
 	struct dma_async_tx_descriptor *depend_tx,
 	dma_async_tx_callback cb_fn, void *cb_fn_param);
+
+void async_tx_quiesce(struct dma_async_tx_descriptor **tx);
 #endif /* _ASYNC_TX_H_ */
-- 
cgit v1.2.3


From 3dce01713723bbcc92562bd4488e8b840a4f786c Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 17 Jul 2008 17:59:55 -0700
Subject: async_tx: remove depend_tx from async_tx_sync_epilog

All callers of async_tx_sync_epilog have called async_tx_quiesce on the
depend_tx, so async_tx_sync_epilog need only call the callback to
complete the operation.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 crypto/async_tx/async_memcpy.c | 2 +-
 crypto/async_tx/async_memset.c | 2 +-
 crypto/async_tx/async_tx.c     | 2 +-
 crypto/async_tx/async_xor.c    | 7 +++----
 include/linux/async_tx.h       | 9 +--------
 5 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/crypto/async_tx/async_memcpy.c b/crypto/async_tx/async_memcpy.c
index 06a7f4be973..ddccfb01c41 100644
--- a/crypto/async_tx/async_memcpy.c
+++ b/crypto/async_tx/async_memcpy.c
@@ -83,7 +83,7 @@ async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
 		kunmap_atomic(dest_buf, KM_USER0);
 		kunmap_atomic(src_buf, KM_USER1);
 
-		async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
+		async_tx_sync_epilog(cb_fn, cb_param);
 	}
 
 	return tx;
diff --git a/crypto/async_tx/async_memset.c b/crypto/async_tx/async_memset.c
index d48ed22ed1c..5b5eb99bb24 100644
--- a/crypto/async_tx/async_memset.c
+++ b/crypto/async_tx/async_memset.c
@@ -76,7 +76,7 @@ async_memset(struct page *dest, int val, unsigned int offset,
 
 		memset(dest_buf, val, len);
 
-		async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
+		async_tx_sync_epilog(cb_fn, cb_param);
 	}
 
 	return tx;
diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c
index 78a61e7f631..35869a37a6f 100644
--- a/crypto/async_tx/async_tx.c
+++ b/crypto/async_tx/async_tx.c
@@ -609,7 +609,7 @@ async_trigger_callback(enum async_tx_flags flags,
 		/* wait for any prerequisite operations */
 		async_tx_quiesce(&depend_tx);
 
-		async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
+		async_tx_sync_epilog(cb_fn, cb_param);
 	}
 
 	return tx;
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 689ecce73ee..65974c6d3d7 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -121,7 +121,6 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
 static void
 do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset,
 	    int src_cnt, size_t len, enum async_tx_flags flags,
-	    struct dma_async_tx_descriptor *depend_tx,
 	    dma_async_tx_callback cb_fn, void *cb_param)
 {
 	int i;
@@ -150,7 +149,7 @@ do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset,
 		src_off += xor_src_cnt;
 	}
 
-	async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
+	async_tx_sync_epilog(cb_fn, cb_param);
 }
 
 /**
@@ -204,7 +203,7 @@ async_xor(struct page *dest, struct page **src_list, unsigned int offset,
 		async_tx_quiesce(&depend_tx);
 
 		do_sync_xor(dest, src_list, offset, src_cnt, len,
-			    flags, depend_tx, cb_fn, cb_param);
+			    flags, cb_fn, cb_param);
 
 		return NULL;
 	}
@@ -287,7 +286,7 @@ async_xor_zero_sum(struct page *dest, struct page **src_list,
 
 		*result = page_is_zero(dest, offset, len) ? 0 : 1;
 
-		async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
+		async_tx_sync_epilog(cb_fn, cb_param);
 	}
 
 	return tx;
diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h
index 9f0e7bd5bdc..0f50d4cc436 100644
--- a/include/linux/async_tx.h
+++ b/include/linux/async_tx.h
@@ -101,21 +101,14 @@ async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx,
 
 /**
  * async_tx_sync_epilog - actions to take if an operation is run synchronously
- * @flags: async_tx flags
- * @depend_tx: transaction depends on depend_tx
  * @cb_fn: function to call when the transaction completes
  * @cb_fn_param: parameter to pass to the callback routine
  */
 static inline void
-async_tx_sync_epilog(unsigned long flags,
-	struct dma_async_tx_descriptor *depend_tx,
-	dma_async_tx_callback cb_fn, void *cb_fn_param)
+async_tx_sync_epilog(dma_async_tx_callback cb_fn, void *cb_fn_param)
 {
 	if (cb_fn)
 		cb_fn(cb_fn_param);
-
-	if (depend_tx && (flags & ASYNC_TX_DEP_ACK))
-		async_tx_ack(depend_tx);
 }
 
 void
-- 
cgit v1.2.3


From 0839875e0c197ded56bbae820e699f26d6fa2697 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 17 Jul 2008 17:59:56 -0700
Subject: async_tx: make async_tx_test_ack a boolean routine

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 include/linux/dmaengine.h | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 9b91d341e1f..adb0b084eb5 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -375,16 +375,14 @@ dma_cookie_t dma_async_memcpy_pg_to_pg(struct dma_chan *chan,
 void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx,
 	struct dma_chan *chan);
 
-static inline void
-async_tx_ack(struct dma_async_tx_descriptor *tx)
+static inline void async_tx_ack(struct dma_async_tx_descriptor *tx)
 {
 	tx->flags |= DMA_CTRL_ACK;
 }
 
-static inline int
-async_tx_test_ack(struct dma_async_tx_descriptor *tx)
+static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx)
 {
-	return tx->flags & DMA_CTRL_ACK;
+	return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK;
 }
 
 #define first_dma_cap(mask) __first_dma_cap(&(mask))
-- 
cgit v1.2.3


From c7141d005a19d2a0a316b3bf9c170d3bedf07bfd Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 17 Jul 2008 17:59:56 -0700
Subject: iop_adma: directly reclaim descriptors on allocation failure

Force callers that trigger an "out of descriptors" condition to run the
cleanup loop directly.  Alleviates the requirement to have soft-irqs
enabled when polling for a descriptor in async_xor.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/iop-adma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 434013d4128..8acbc3ab0b9 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -373,8 +373,8 @@ retry:
 	if (!retry++)
 		goto retry;
 
-	/* try to free some slots if the allocation fails */
-	tasklet_schedule(&iop_chan->irq_tasklet);
+	/* perform direct reclaim if the allocation fails */
+	__iop_adma_slot_cleanup(iop_chan);
 
 	return NULL;
 }
-- 
cgit v1.2.3


From 5eb907aaaf7a316a0097ff9f8c21bf9fc468a1f1 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 17 Jul 2008 17:59:56 -0700
Subject: iop_adma: document how to calculate the minimum descriptor pool size

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/iop-adma.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 8acbc3ab0b9..85bfeba4d85 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -450,7 +450,16 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx)
 static void iop_chan_start_null_memcpy(struct iop_adma_chan *iop_chan);
 static void iop_chan_start_null_xor(struct iop_adma_chan *iop_chan);
 
-/* returns the number of allocated descriptors */
+/**
+ * iop_adma_alloc_chan_resources -  returns the number of allocated descriptors
+ * @chan - allocate descriptor resources for this channel
+ * @client - current client requesting the channel be ready for requests
+ *
+ * Note: We keep the slots for 1 operation on iop_chan->chain at all times.  To
+ * avoid deadlock, via async_xor, num_descs_in_pool must at a minimum be
+ * greater than 2x the number slots needed to satisfy a device->max_xor
+ * request.
+ * */
 static int iop_adma_alloc_chan_resources(struct dma_chan *chan,
 					 struct dma_client *client)
 {
-- 
cgit v1.2.3


From 2a46fa13d788364c093c4296fe01cae837aa8919 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 17 Jul 2008 17:59:56 -0700
Subject: iop_adma: cleanup iop_chan_xor_slot_count

- use a table for iop13xx, trade text for data
- shrink the iop3xx to a cache line

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 include/asm-arm/arch-iop13xx/adma.h    | 18 +++++++-----------
 include/asm-arm/hardware/iop3xx-adma.h |  4 ++--
 2 files changed, 9 insertions(+), 13 deletions(-)

diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h
index 90d14ee564f..ef4f5da2029 100644
--- a/include/asm-arm/arch-iop13xx/adma.h
+++ b/include/asm-arm/arch-iop13xx/adma.h
@@ -198,17 +198,13 @@ iop_chan_memset_slot_count(size_t len, int *slots_per_op)
 static inline int
 iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
 {
-	int num_slots;
-	/* slots_to_find = 1 for basic descriptor + 1 per 4 sources above 1
-	 * (1 source => 8 bytes) (1 slot => 32 bytes)
-	 */
-	num_slots = 1 + (((src_cnt - 1) << 3) >> 5);
-	if (((src_cnt - 1) << 3) & 0x1f)
-		num_slots++;
-
-	*slots_per_op = num_slots;
-
-	return num_slots;
+	static const char slot_count_table[] = { 1, 2, 2, 2,
+						 2, 3, 3, 3,
+						 3, 4, 4, 4,
+						 4, 5, 5, 5,
+						};
+	*slots_per_op = slot_count_table[src_cnt - 1];
+	return *slots_per_op;
 }
 
 #define ADMA_MAX_BYTE_COUNT	(16 * 1024 * 1024)
diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/include/asm-arm/hardware/iop3xx-adma.h
index a32b86ac62a..af64676650a 100644
--- a/include/asm-arm/hardware/iop3xx-adma.h
+++ b/include/asm-arm/hardware/iop3xx-adma.h
@@ -260,7 +260,7 @@ static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op)
 static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt,
 					int *slots_per_op)
 {
-	static const int slot_count_table[] = { 0,
+	static const char slot_count_table[] = {
 						1, 1, 1, 1, /* 01 - 04 */
 						2, 2, 2, 2, /* 05 - 08 */
 						4, 4, 4, 4, /* 09 - 12 */
@@ -270,7 +270,7 @@ static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt,
 						8, 8, 8, 8, /* 25 - 28 */
 						8, 8, 8, 8, /* 29 - 32 */
 					      };
-	*slots_per_op = slot_count_table[src_cnt];
+	*slots_per_op = slot_count_table[src_cnt - 1];
 	return *slots_per_op;
 }
 
-- 
cgit v1.2.3


From d88c16919793a9f5dc93e7956da5bb089c7600b4 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 18 Jul 2008 08:59:24 +0200
Subject: Revert parts of "ftrace: do not trace scheduler functions"

the removal of -mno-spe in the !ftrace case was not intended.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/Makefile b/kernel/Makefile
index 985ddb7da4d..15ab63ffe64 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -11,6 +11,8 @@ obj-y     = sched.o fork.o exec_domain.o panic.o printk.o profile.o \
 	    hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
 	    notifier.o ksysfs.o pm_qos_params.o sched_clock.o
 
+CFLAGS_REMOVE_sched.o = -mno-spe
+
 ifdef CONFIG_FTRACE
 # Do not trace debug files and internal ftrace files
 CFLAGS_REMOVE_lockdep.o = -pg
-- 
cgit v1.2.3


From 725c3a2d70f958adee807c178178819a50f68a56 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Fri, 18 Jul 2008 09:12:49 +0200
Subject: Revert "ACPI: don't walk tables if ACPI was disabled"

This reverts commit d1857056904d5f313f11184fcfa624652ff9620a.

Double commit, noticed by Thomas Gleixner.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/glue.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 0f2dd81736b..2f173e83f8a 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -335,9 +335,6 @@ static int __init acpi_rtc_init(void)
 {
 	struct device *dev = get_rtc_dev();
 
-	if (acpi_disabled)
-		return 0;
-
 	if (acpi_disabled)
 		return 0;
 
-- 
cgit v1.2.3


From fbfca4b8781757c1950b2225ba67d83072e0bc07 Mon Sep 17 00:00:00 2001
From: Ben Nizette <bn@niasdigital.com>
Date: Fri, 18 Jul 2008 16:48:09 +1000
Subject: avr32: clean up mci platform code

This patch does a few small cleanups around the atmel mci platform code
and in the atmel-mci driver.  The platform changes simply removes an
unused variable, uses the fact that by the end we always have some form
of platform data and notes that GPIO_PIN_NONE != 0.  This last point
could cause the incorrect attempt to twice reserve pin PA0.

While we've got the hood up, add linux/err.h to the atmel-mci.c include
list.  It needs it and generally pulls it by voodoo but I did once
stumble across a config which don't build.

This is against Linus' latest git.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/at32ap700x.c | 13 ++++++-------
 drivers/mmc/host/atmel-mci.c        |  1 +
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 021d5121718..4ac38d28891 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1284,7 +1284,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
 	struct mci_platform_data	_data;
 	struct platform_device		*pdev;
-	struct dw_dma_slave		*dws;
 
 	if (id != 0)
 		return NULL;
@@ -1300,6 +1299,8 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 	if (!data) {
 		data = &_data;
 		memset(data, 0, sizeof(struct mci_platform_data));
+		data->detect_pin = GPIO_PIN_NONE;
+		data->wp_pin = GPIO_PIN_NONE;
 	}
 
 	if (platform_device_add_data(pdev, data,
@@ -1313,12 +1314,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
 
-	if (data) {
-		if (data->detect_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->detect_pin, 0);
-		if (data->wp_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->wp_pin, 0);
-	}
+	if (data->detect_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->detect_pin, 0);
+	if (data->wp_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->wp_pin, 0);
 
 	atmel_mci0_pclk.dev = &pdev->dev;
 
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index cce873c5a14..c2f8aa840e8 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -10,6 +10,7 @@
 #include <linux/blkdev.h>
 #include <linux/clk.h>
 #include <linux/device.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-- 
cgit v1.2.3


From 13b40c1e40f3261e83ee514a08b77dbecb93021b Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 1 Jul 2008 10:32:50 -0700
Subject: sched: reduce stack size in isolated_cpu_setup()

  * Remove 16k stack requirements in isolated_cpu_setup when NR_CPUS=4096.

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 99e6d850eca..1ee18dbb451 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6768,7 +6768,8 @@ static cpumask_t cpu_isolated_map = CPU_MASK_NONE;
 /* Setup the mask of cpus configured for isolated domains */
 static int __init isolated_cpu_setup(char *str)
 {
-	int ints[NR_CPUS], i;
+	static int __initdata ints[NR_CPUS];
+	int i;
 
 	str = get_options(str, ARRAY_SIZE(ints), ints);
 	cpus_clear(cpu_isolated_map);
-- 
cgit v1.2.3


From 82af6bc0986c5140efc875b2d91326031f0254ab Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 17 Jul 2008 23:37:20 +0200
Subject: ALSA: opti93x - Fix NULL dereference

Probing non-existing device causes Oops with snd-opti93x driver
due to NULL access in the destructor of the error path.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Ingo Molnar <mingo@elte.hu>
---
 sound/isa/opti9xx/opti92x-ad1848.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index 41c047e665e..d20abb28612 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -688,7 +688,7 @@ static void snd_card_opti9xx_free(struct snd_card *card)
 	if (chip) {
 #ifdef OPTi93X
 		struct snd_cs4231 *codec = chip->codec;
-		if (codec->irq > 0) {
+		if (codec && codec->irq > 0) {
 			disable_irq(codec->irq);
 			free_irq(codec->irq, codec);
 		}
-- 
cgit v1.2.3


From 51f6baad264ca4bacdbf4fa25c676fa30d344bfa Mon Sep 17 00:00:00 2001
From: Rene Herman <rene.herman@gmail.com>
Date: Fri, 18 Jul 2008 11:15:12 +0200
Subject: ALSA: opti9xx: no isapnp param for !CONFIG_PNP

"isapnp" needs CONFIG_PNP to be useful.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/isa/opti9xx/opti92x-ad1848.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index d20abb28612..0797ca441a3 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -68,7 +68,9 @@ MODULE_SUPPORTED_DEVICE("{{OPTi,82C924 (AD1848)},"
 static int index = SNDRV_DEFAULT_IDX1;	/* Index 0-MAX */
 static char *id = SNDRV_DEFAULT_STR1;		/* ID for this card */
 //static int enable = SNDRV_DEFAULT_ENABLE1;	/* Enable this card */
+#ifdef CONFIG_PNP
 static int isapnp = 1;			/* Enable ISA PnP detection */
+#endif
 static long port = SNDRV_DEFAULT_PORT1; 	/* 0x530,0xe80,0xf40,0x604 */
 static long mpu_port = SNDRV_DEFAULT_PORT1;	/* 0x300,0x310,0x320,0x330 */
 static long fm_port = SNDRV_DEFAULT_PORT1;	/* 0x388 */
@@ -85,8 +87,10 @@ module_param(id, charp, 0444);
 MODULE_PARM_DESC(id, "ID string for opti9xx based soundcard.");
 //module_param(enable, bool, 0444);
 //MODULE_PARM_DESC(enable, "Enable opti9xx soundcard.");
+#ifdef CONFIG_PNP
 module_param(isapnp, bool, 0444);
 MODULE_PARM_DESC(isapnp, "Enable ISA PnP detection for specified soundcard.");
+#endif
 module_param(port, long, 0444);
 MODULE_PARM_DESC(port, "WSS port # for opti9xx driver.");
 module_param(mpu_port, long, 0444);
-- 
cgit v1.2.3


From f53281e62a41ac176f050307c0d746a1183a68e8 Mon Sep 17 00:00:00 2001
From: Kailang Yang <kailang@realtek.com>
Date: Fri, 18 Jul 2008 12:36:43 +0200
Subject: ALSA: hda - Add support of ASUS Eeepc P90*

- Support ASUS_P900A = P703
- Support ASUS_P901

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 179 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 172 insertions(+), 7 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index e5f8d3b699e..f1cdce4c8a6 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -122,6 +122,8 @@ enum {
 /* ALC269 models */
 enum {
 	ALC269_BASIC,
+	ALC269_ASUS_EEEPC_P703,
+	ALC269_ASUS_EEEPC_P901,
 	ALC269_AUTO,
 	ALC269_MODEL_LAST /* last tag */
 };
@@ -10946,7 +10948,23 @@ static int patch_alc268(struct hda_codec *codec)
 
 static hda_nid_t alc269_adc_nids[1] = {
 	/* ADC1 */
-	0x07,
+	0x08,
+};
+
+static struct hda_input_mux alc269_eeepc_dmic_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "i-Mic", 0x5 },
+		{ "e-Mic", 0x0 },
+	},
+};
+
+static struct hda_input_mux alc269_eeepc_amic_capture_source = {
+	.num_items = 2,
+	.items = {
+		{ "i-Mic", 0x1 },
+		{ "e-Mic", 0x0 },
+	},
 };
 
 #define alc269_modes		alc260_modes
@@ -10968,10 +10986,27 @@ static struct snd_kcontrol_new alc269_base_mixer[] = {
 	{ } /* end */
 };
 
+/* bind volumes of both NID 0x0c and 0x0d */
+static struct hda_bind_ctls alc269_epc_bind_vol = {
+	.ops = &snd_hda_bind_vol,
+	.values = {
+		HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
+		HDA_COMPOSE_AMP_VAL(0x03, 3, 0, HDA_OUTPUT),
+		0
+	},
+};
+
+static struct snd_kcontrol_new alc269_eeepc_mixer[] = {
+	HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_BIND_VOL("LineOut Playback Volume", &alc269_epc_bind_vol),
+	HDA_CODEC_MUTE("LineOut Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
 /* capture mixer elements */
 static struct snd_kcontrol_new alc269_capture_mixer[] = {
-	HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 		/* The multiple "Capture Source" controls confuse alsamixer
@@ -10987,6 +11022,13 @@ static struct snd_kcontrol_new alc269_capture_mixer[] = {
 	{ } /* end */
 };
 
+/* capture mixer elements */
+static struct snd_kcontrol_new alc269_epc_capture_mixer[] = {
+	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+	{ } /* end */
+};
+
 /*
  * generic initialization of ADC, input mixers and output mixers
  */
@@ -10994,7 +11036,7 @@ static struct hda_verb alc269_init_verbs[] = {
 	/*
 	 * Unmute ADC0 and set the default input to mic-in
 	 */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 
 	/* Mute input amps (PCBeep, Line In, Mic 1 & Mic 2) of the
 	 * analog-loopback mixer widget
@@ -11057,6 +11099,98 @@ static struct hda_verb alc269_init_verbs[] = {
 	{ }
 };
 
+static struct hda_verb alc269_eeepc_dmic_init_verbs[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{0x23, AC_VERB_SET_CONNECT_SEL, 0x05},
+	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7019 | (0x00 << 8))},
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+	{}
+};
+
+static struct hda_verb alc269_eeepc_amic_init_verbs[] = {
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{0x23, AC_VERB_SET_CONNECT_SEL, 0x01},
+	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, 0xb026 },
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x701b | (0x00 << 8))},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+	{}
+};
+
+/* toggle speaker-output according to the hp-jack state */
+static void alc269_speaker_automute(struct hda_codec *codec)
+{
+	unsigned int present;
+	unsigned int bits;
+
+	present = snd_hda_codec_read(codec, 0x15, 0,
+				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	bits = present ? AMP_IN_MUTE(0) : 0;
+	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
+				 AMP_IN_MUTE(0), bits);
+	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 1,
+				 AMP_IN_MUTE(0), bits);
+}
+
+static void alc269_eeepc_dmic_automute(struct hda_codec *codec)
+{
+	unsigned int present;
+
+	present = snd_hda_codec_read(codec, 0x18, 0, AC_VERB_GET_PIN_SENSE, 0)
+		& AC_PINSENSE_PRESENCE;
+	snd_hda_codec_write(codec, 0x23, 0, AC_VERB_SET_CONNECT_SEL,
+			    present ? 0 : 5);
+}
+
+static void alc269_eeepc_amic_automute(struct hda_codec *codec)
+{
+	unsigned int present;
+
+	present = snd_hda_codec_read(codec, 0x18, 0, AC_VERB_GET_PIN_SENSE, 0)
+		& AC_PINSENSE_PRESENCE;
+	snd_hda_codec_write(codec, 0x24, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+			    present ? AMP_IN_UNMUTE(0) : AMP_IN_MUTE(0));
+	snd_hda_codec_write(codec, 0x24, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+			    present ? AMP_IN_MUTE(1) : AMP_IN_UNMUTE(1));
+}
+
+/* unsolicited event for HP jack sensing */
+static void alc269_eeepc_dmic_unsol_event(struct hda_codec *codec,
+					  unsigned int res)
+{
+	if ((res >> 26) == ALC880_HP_EVENT)
+		alc269_speaker_automute(codec);
+
+	if ((res >> 26) == ALC880_MIC_EVENT)
+		alc269_eeepc_dmic_automute(codec);
+}
+
+static void alc269_eeepc_dmic_inithook(struct hda_codec *codec)
+{
+	alc269_speaker_automute(codec);
+	alc269_eeepc_dmic_automute(codec);
+}
+
+/* unsolicited event for HP jack sensing */
+static void alc269_eeepc_amic_unsol_event(struct hda_codec *codec,
+					  unsigned int res)
+{
+	if ((res >> 26) == ALC880_HP_EVENT)
+		alc269_speaker_automute(codec);
+
+	if ((res >> 26) == ALC880_MIC_EVENT)
+		alc269_eeepc_amic_automute(codec);
+}
+
+static void alc269_eeepc_amic_inithook(struct hda_codec *codec)
+{
+	alc269_speaker_automute(codec);
+	alc269_eeepc_amic_automute(codec);
+}
+
 /* add playback controls from the parsed DAC table */
 static int alc269_auto_create_multi_out_ctls(struct alc_spec *spec,
 					     const struct auto_pin_cfg *cfg)
@@ -11188,6 +11322,9 @@ static int alc269_parse_auto_config(struct hda_codec *codec)
 	if (err < 0)
 		return err;
 
+	spec->mixers[spec->num_mixers] = alc269_capture_mixer;
+	spec->num_mixers++;
+
 	return 1;
 }
 
@@ -11215,12 +11352,16 @@ static const char *alc269_models[ALC269_MODEL_LAST] = {
 };
 
 static struct snd_pci_quirk alc269_cfg_tbl[] = {
+	SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
+		      ALC269_ASUS_EEEPC_P703),
+	SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901",
+		      ALC269_ASUS_EEEPC_P901),
 	{}
 };
 
 static struct alc_config_preset alc269_presets[] = {
 	[ALC269_BASIC] = {
-		.mixers = { alc269_base_mixer },
+		.mixers = { alc269_base_mixer, alc269_capture_mixer },
 		.init_verbs = { alc269_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
 		.dac_nids = alc269_dac_nids,
@@ -11229,6 +11370,32 @@ static struct alc_config_preset alc269_presets[] = {
 		.channel_mode = alc269_modes,
 		.input_mux = &alc269_capture_source,
 	},
+	[ALC269_ASUS_EEEPC_P703] = {
+		.mixers = { alc269_eeepc_mixer, alc269_epc_capture_mixer },
+		.init_verbs = { alc269_init_verbs,
+				alc269_eeepc_amic_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
+		.dac_nids = alc269_dac_nids,
+		.hp_nid = 0x03,
+		.num_channel_mode = ARRAY_SIZE(alc269_modes),
+		.channel_mode = alc269_modes,
+		.input_mux = &alc269_eeepc_amic_capture_source,
+		.unsol_event = alc269_eeepc_amic_unsol_event,
+		.init_hook = alc269_eeepc_amic_inithook,
+	},
+	[ALC269_ASUS_EEEPC_P901] = {
+		.mixers = { alc269_eeepc_mixer, alc269_epc_capture_mixer},
+		.init_verbs = { alc269_init_verbs,
+				alc269_eeepc_dmic_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
+		.dac_nids = alc269_dac_nids,
+		.hp_nid = 0x03,
+		.num_channel_mode = ARRAY_SIZE(alc269_modes),
+		.channel_mode = alc269_modes,
+		.input_mux = &alc269_eeepc_dmic_capture_source,
+		.unsol_event = alc269_eeepc_dmic_unsol_event,
+		.init_hook = alc269_eeepc_dmic_inithook,
+	},
 };
 
 static int patch_alc269(struct hda_codec *codec)
@@ -11282,8 +11449,6 @@ static int patch_alc269(struct hda_codec *codec)
 
 	spec->adc_nids = alc269_adc_nids;
 	spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
-	spec->mixers[spec->num_mixers] = alc269_capture_mixer;
-	spec->num_mixers++;
 
 	codec->patch_ops = alc_patch_ops;
 	if (board_config == ALC269_AUTO)
-- 
cgit v1.2.3


From 7ebefa8ceefed44cc321be70afc54a585a68ac0b Mon Sep 17 00:00:00 2001
From: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Date: Tue, 1 Jul 2008 23:32:15 +0200
Subject: sched: rework of "prioritize non-migratable tasks over migratable
 ones"

(1) handle in a generic way all cases when a newly woken-up task is
not migratable (not just a corner case when "rt_se->nr_cpus_allowed ==
1")

(2) if current is to be preempted, then make sure "p" will be picked
up by pick_next_task_rt().
i.e. move task's group at the head of its list as well.

currently, it's not a case for the group-scheduling case as described
here: http://www.ussg.iu.edu/hypermail/linux/kernel/0807.0/0134.html

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_rt.c | 68 ++++++++++++++++++++++++++++++++-----------------------
 1 file changed, 40 insertions(+), 28 deletions(-)

diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 47ceac9e855..d3d1cccb3d7 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -599,11 +599,7 @@ static void __enqueue_rt_entity(struct sched_rt_entity *rt_se)
 	if (group_rq && (rt_rq_throttled(group_rq) || !group_rq->rt_nr_running))
 		return;
 
-	if (rt_se->nr_cpus_allowed == 1)
-		list_add(&rt_se->run_list, queue);
-	else
-		list_add_tail(&rt_se->run_list, queue);
-
+	list_add_tail(&rt_se->run_list, queue);
 	__set_bit(rt_se_prio(rt_se), array->bitmap);
 
 	inc_rt_tasks(rt_se, rt_rq);
@@ -688,32 +684,34 @@ static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
  * Put task to the end of the run list without the overhead of dequeue
  * followed by enqueue.
  */
-static
-void requeue_rt_entity(struct rt_rq *rt_rq, struct sched_rt_entity *rt_se)
+static void
+requeue_rt_entity(struct rt_rq *rt_rq, struct sched_rt_entity *rt_se, int head)
 {
-	struct rt_prio_array *array = &rt_rq->active;
-
 	if (on_rt_rq(rt_se)) {
-		list_del_init(&rt_se->run_list);
-		list_add_tail(&rt_se->run_list,
-			      array->queue + rt_se_prio(rt_se));
+		struct rt_prio_array *array = &rt_rq->active;
+		struct list_head *queue = array->queue + rt_se_prio(rt_se);
+
+		if (head)
+			list_move(&rt_se->run_list, queue);
+		else
+			list_move_tail(&rt_se->run_list, queue);
 	}
 }
 
-static void requeue_task_rt(struct rq *rq, struct task_struct *p)
+static void requeue_task_rt(struct rq *rq, struct task_struct *p, int head)
 {
 	struct sched_rt_entity *rt_se = &p->rt;
 	struct rt_rq *rt_rq;
 
 	for_each_sched_rt_entity(rt_se) {
 		rt_rq = rt_rq_of_se(rt_se);
-		requeue_rt_entity(rt_rq, rt_se);
+		requeue_rt_entity(rt_rq, rt_se, head);
 	}
 }
 
 static void yield_task_rt(struct rq *rq)
 {
-	requeue_task_rt(rq, rq->curr);
+	requeue_task_rt(rq, rq->curr, 0);
 }
 
 #ifdef CONFIG_SMP
@@ -753,6 +751,30 @@ static int select_task_rq_rt(struct task_struct *p, int sync)
 	 */
 	return task_cpu(p);
 }
+
+static void check_preempt_equal_prio(struct rq *rq, struct task_struct *p)
+{
+	cpumask_t mask;
+
+	if (rq->curr->rt.nr_cpus_allowed == 1)
+		return;
+
+	if (p->rt.nr_cpus_allowed != 1
+	    && cpupri_find(&rq->rd->cpupri, p, &mask))
+		return;
+
+	if (!cpupri_find(&rq->rd->cpupri, rq->curr, &mask))
+		return;
+
+	/*
+	 * There appears to be other cpus that can accept
+	 * current and none to run 'p', so lets reschedule
+	 * to try and push current away:
+	 */
+	requeue_task_rt(rq, p, 1);
+	resched_task(rq->curr);
+}
+
 #endif /* CONFIG_SMP */
 
 /*
@@ -778,18 +800,8 @@ static void check_preempt_curr_rt(struct rq *rq, struct task_struct *p)
 	 * to move current somewhere else, making room for our non-migratable
 	 * task.
 	 */
-	if((p->prio == rq->curr->prio)
-	   && p->rt.nr_cpus_allowed == 1
-	   && rq->curr->rt.nr_cpus_allowed != 1) {
-		cpumask_t mask;
-
-		if (cpupri_find(&rq->rd->cpupri, rq->curr, &mask))
-			/*
-			 * There appears to be other cpus that can accept
-			 * current, so lets reschedule to try and push it away
-			 */
-			resched_task(rq->curr);
-	}
+	if (p->prio == rq->curr->prio && !need_resched())
+		check_preempt_equal_prio(rq, p);
 #endif
 }
 
@@ -1415,7 +1427,7 @@ static void task_tick_rt(struct rq *rq, struct task_struct *p, int queued)
 	 * on the queue:
 	 */
 	if (p->rt.run_list.prev != p->rt.run_list.next) {
-		requeue_task_rt(rq, p);
+		requeue_task_rt(rq, p, 0);
 		set_tsk_need_resched(p);
 	}
 }
-- 
cgit v1.2.3


From e761b7725234276a802322549cee5255305a0930 Mon Sep 17 00:00:00 2001
From: Max Krasnyansky <maxk@qualcomm.com>
Date: Tue, 15 Jul 2008 04:43:49 -0700
Subject: cpu hotplug, sched: Introduce cpu_active_map and redo sched domain
 managment (take 2)

This is based on Linus' idea of creating cpu_active_map that prevents
scheduler load balancer from migrating tasks to the cpu that is going
down.

It allows us to simplify domain management code and avoid unecessary
domain rebuilds during cpu hotplug event handling.

Please ignore the cpusets part for now. It needs some more work in order
to avoid crazy lock nesting. Although I did simplfy and unify domain
reinitialization logic. We now simply call partition_sched_domains() in
all the cases. This means that we're using exact same code paths as in
cpusets case and hence the test below cover cpusets too.
Cpuset changes to make rebuild_sched_domains() callable from various
contexts are in the separate patch (right next after this one).

This not only boots but also easily handles
	while true; do make clean; make -j 8; done
and
	while true; do on-off-cpu 1; done
at the same time.
(on-off-cpu 1 simple does echo 0/1 > /sys/.../cpu1/online thing).

Suprisingly the box (dual-core Core2) is quite usable. In fact I'm typing
this on right now in gnome-terminal and things are moving just fine.

Also this is running with most of the debug features enabled (lockdep,
mutex, etc) no BUG_ONs or lockdep complaints so far.

I believe I addressed all of the Dmitry's comments for original Linus'
version. I changed both fair and rt balancer to mask out non-active cpus.
And replaced cpu_is_offline() with !cpu_active() in the main scheduler
code where it made sense (to me).

Signed-off-by: Max Krasnyanskiy <maxk@qualcomm.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Cc: dmitry.adamushko@gmail.com
Cc: pj@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/cpumask.h |   6 ++-
 include/linux/cpuset.h  |   7 ++++
 init/main.c             |   7 ++++
 kernel/cpu.c            |  30 +++++++++++---
 kernel/cpuset.c         |   2 +-
 kernel/sched.c          | 108 ++++++++++++++++++++----------------------------
 kernel/sched_fair.c     |   3 ++
 kernel/sched_rt.c       |   7 ++++
 8 files changed, 99 insertions(+), 71 deletions(-)

diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index c24875bd9c5..d614d247279 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -359,13 +359,14 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp,
 
 /*
  * The following particular system cpumasks and operations manage
- * possible, present and online cpus.  Each of them is a fixed size
+ * possible, present, active and online cpus.  Each of them is a fixed size
  * bitmap of size NR_CPUS.
  *
  *  #ifdef CONFIG_HOTPLUG_CPU
  *     cpu_possible_map - has bit 'cpu' set iff cpu is populatable
  *     cpu_present_map  - has bit 'cpu' set iff cpu is populated
  *     cpu_online_map   - has bit 'cpu' set iff cpu available to scheduler
+ *     cpu_active_map   - has bit 'cpu' set iff cpu available to migration
  *  #else
  *     cpu_possible_map - has bit 'cpu' set iff cpu is populated
  *     cpu_present_map  - copy of cpu_possible_map
@@ -416,6 +417,7 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp,
 extern cpumask_t cpu_possible_map;
 extern cpumask_t cpu_online_map;
 extern cpumask_t cpu_present_map;
+extern cpumask_t cpu_active_map;
 
 #if NR_CPUS > 1
 #define num_online_cpus()	cpus_weight(cpu_online_map)
@@ -424,6 +426,7 @@ extern cpumask_t cpu_present_map;
 #define cpu_online(cpu)		cpu_isset((cpu), cpu_online_map)
 #define cpu_possible(cpu)	cpu_isset((cpu), cpu_possible_map)
 #define cpu_present(cpu)	cpu_isset((cpu), cpu_present_map)
+#define cpu_active(cpu)		cpu_isset((cpu), cpu_active_map)
 #else
 #define num_online_cpus()	1
 #define num_possible_cpus()	1
@@ -431,6 +434,7 @@ extern cpumask_t cpu_present_map;
 #define cpu_online(cpu)		((cpu) == 0)
 #define cpu_possible(cpu)	((cpu) == 0)
 #define cpu_present(cpu)	((cpu) == 0)
+#define cpu_active(cpu)		((cpu) == 0)
 #endif
 
 #define cpu_is_offline(cpu)	unlikely(!cpu_online(cpu))
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 038578362b4..e8f450c499b 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -78,6 +78,8 @@ extern void cpuset_track_online_nodes(void);
 
 extern int current_cpuset_is_being_rebound(void);
 
+extern void rebuild_sched_domains(void);
+
 #else /* !CONFIG_CPUSETS */
 
 static inline int cpuset_init_early(void) { return 0; }
@@ -156,6 +158,11 @@ static inline int current_cpuset_is_being_rebound(void)
 	return 0;
 }
 
+static inline void rebuild_sched_domains(void)
+{
+	partition_sched_domains(0, NULL, NULL);
+}
+
 #endif /* !CONFIG_CPUSETS */
 
 #endif /* _LINUX_CPUSET_H */
diff --git a/init/main.c b/init/main.c
index edeace036fd..dd25259530e 100644
--- a/init/main.c
+++ b/init/main.c
@@ -415,6 +415,13 @@ static void __init smp_init(void)
 {
 	unsigned int cpu;
 
+	/*
+	 * Set up the current CPU as possible to migrate to.
+	 * The other ones will be done by cpu_up/cpu_down()
+	 */
+	cpu = smp_processor_id();
+	cpu_set(cpu, cpu_active_map);
+
 	/* FIXME: This should be done in userspace --RR */
 	for_each_present_cpu(cpu) {
 		if (num_online_cpus() >= setup_max_cpus)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index cfb1d43ab80..a1ac7ea245d 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -64,6 +64,8 @@ void __init cpu_hotplug_init(void)
 	cpu_hotplug.refcount = 0;
 }
 
+cpumask_t cpu_active_map;
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 void get_online_cpus(void)
@@ -291,11 +293,20 @@ int __ref cpu_down(unsigned int cpu)
 	int err = 0;
 
 	cpu_maps_update_begin();
-	if (cpu_hotplug_disabled)
+
+	if (cpu_hotplug_disabled) {
 		err = -EBUSY;
-	else
-		err = _cpu_down(cpu, 0);
+		goto out;
+	}
+
+	cpu_clear(cpu, cpu_active_map);
+
+	err = _cpu_down(cpu, 0);
+
+	if (cpu_online(cpu))
+		cpu_set(cpu, cpu_active_map);
 
+out:
 	cpu_maps_update_done();
 	return err;
 }
@@ -355,11 +366,18 @@ int __cpuinit cpu_up(unsigned int cpu)
 	}
 
 	cpu_maps_update_begin();
-	if (cpu_hotplug_disabled)
+
+	if (cpu_hotplug_disabled) {
 		err = -EBUSY;
-	else
-		err = _cpu_up(cpu, 0);
+		goto out;
+	}
 
+	err = _cpu_up(cpu, 0);
+
+	if (cpu_online(cpu))
+		cpu_set(cpu, cpu_active_map);
+
+out:
 	cpu_maps_update_done();
 	return err;
 }
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 459d601947a..3c3ef02f65f 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -564,7 +564,7 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
  *	partition_sched_domains().
  */
 
-static void rebuild_sched_domains(void)
+void rebuild_sched_domains(void)
 {
 	struct kfifo *q;	/* queue of cpusets to be scanned */
 	struct cpuset *cp;	/* scans q */
diff --git a/kernel/sched.c b/kernel/sched.c
index 1ee18dbb451..c237624a8a0 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2881,7 +2881,7 @@ static void sched_migrate_task(struct task_struct *p, int dest_cpu)
 
 	rq = task_rq_lock(p, &flags);
 	if (!cpu_isset(dest_cpu, p->cpus_allowed)
-	    || unlikely(cpu_is_offline(dest_cpu)))
+	    || unlikely(!cpu_active(dest_cpu)))
 		goto out;
 
 	/* force the process onto the specified CPU */
@@ -3849,7 +3849,7 @@ int select_nohz_load_balancer(int stop_tick)
 		/*
 		 * If we are going offline and still the leader, give up!
 		 */
-		if (cpu_is_offline(cpu) &&
+		if (!cpu_active(cpu) &&
 		    atomic_read(&nohz.load_balancer) == cpu) {
 			if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
 				BUG();
@@ -5876,7 +5876,7 @@ static int __migrate_task(struct task_struct *p, int src_cpu, int dest_cpu)
 	struct rq *rq_dest, *rq_src;
 	int ret = 0, on_rq;
 
-	if (unlikely(cpu_is_offline(dest_cpu)))
+	if (unlikely(!cpu_active(dest_cpu)))
 		return ret;
 
 	rq_src = cpu_rq(src_cpu);
@@ -7553,18 +7553,6 @@ void __attribute__((weak)) arch_update_cpu_topology(void)
 {
 }
 
-/*
- * Free current domain masks.
- * Called after all cpus are attached to NULL domain.
- */
-static void free_sched_domains(void)
-{
-	ndoms_cur = 0;
-	if (doms_cur != &fallback_doms)
-		kfree(doms_cur);
-	doms_cur = &fallback_doms;
-}
-
 /*
  * Set up scheduler domains and groups. Callers must hold the hotplug lock.
  * For now this just excludes isolated cpus, but could be used to
@@ -7643,7 +7631,7 @@ static int dattrs_equal(struct sched_domain_attr *cur, int idx_cur,
  * ownership of it and will kfree it when done with it. If the caller
  * failed the kmalloc call, then it can pass in doms_new == NULL,
  * and partition_sched_domains() will fallback to the single partition
- * 'fallback_doms'.
+ * 'fallback_doms', it also forces the domains to be rebuilt.
  *
  * Call with hotplug lock held
  */
@@ -7657,12 +7645,8 @@ void partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
 	/* always unregister in case we don't destroy any domains */
 	unregister_sched_domain_sysctl();
 
-	if (doms_new == NULL) {
-		ndoms_new = 1;
-		doms_new = &fallback_doms;
-		cpus_andnot(doms_new[0], cpu_online_map, cpu_isolated_map);
-		dattr_new = NULL;
-	}
+	if (doms_new == NULL)
+		ndoms_new = 0;
 
 	/* Destroy deleted domains */
 	for (i = 0; i < ndoms_cur; i++) {
@@ -7677,6 +7661,14 @@ match1:
 		;
 	}
 
+	if (doms_new == NULL) {
+		ndoms_cur = 0;
+		ndoms_new = 1;
+		doms_new = &fallback_doms;
+		cpus_andnot(doms_new[0], cpu_online_map, cpu_isolated_map);
+		dattr_new = NULL;
+	}
+
 	/* Build new domains */
 	for (i = 0; i < ndoms_new; i++) {
 		for (j = 0; j < ndoms_cur; j++) {
@@ -7707,17 +7699,10 @@ match2:
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
 int arch_reinit_sched_domains(void)
 {
-	int err;
-
 	get_online_cpus();
-	mutex_lock(&sched_domains_mutex);
-	detach_destroy_domains(&cpu_online_map);
-	free_sched_domains();
-	err = arch_init_sched_domains(&cpu_online_map);
-	mutex_unlock(&sched_domains_mutex);
+	rebuild_sched_domains();
 	put_online_cpus();
-
-	return err;
+	return 0;
 }
 
 static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
@@ -7783,14 +7768,30 @@ int sched_create_sysfs_power_savings_entries(struct sysdev_class *cls)
 }
 #endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
 
+#ifndef CONFIG_CPUSETS
 /*
- * Force a reinitialization of the sched domains hierarchy. The domains
- * and groups cannot be updated in place without racing with the balancing
- * code, so we temporarily attach all running cpus to the NULL domain
- * which will prevent rebalancing while the sched domains are recalculated.
+ * Add online and remove offline CPUs from the scheduler domains.
+ * When cpusets are enabled they take over this function.
  */
 static int update_sched_domains(struct notifier_block *nfb,
 				unsigned long action, void *hcpu)
+{
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+	case CPU_DEAD:
+	case CPU_DEAD_FROZEN:
+		partition_sched_domains(0, NULL, NULL);
+		return NOTIFY_OK;
+
+	default:
+		return NOTIFY_DONE;
+	}
+}
+#endif
+
+static int update_runtime(struct notifier_block *nfb,
+				unsigned long action, void *hcpu)
 {
 	int cpu = (int)(long)hcpu;
 
@@ -7798,44 +7799,18 @@ static int update_sched_domains(struct notifier_block *nfb,
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
 		disable_runtime(cpu_rq(cpu));
-		/* fall-through */
-	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
-		detach_destroy_domains(&cpu_online_map);
-		free_sched_domains();
 		return NOTIFY_OK;
 
-
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		enable_runtime(cpu_rq(cpu));
-		/* fall-through */
-	case CPU_UP_CANCELED:
-	case CPU_UP_CANCELED_FROZEN:
-	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
-		/*
-		 * Fall through and re-initialise the domains.
-		 */
-		break;
+		return NOTIFY_OK;
+
 	default:
 		return NOTIFY_DONE;
 	}
-
-#ifndef CONFIG_CPUSETS
-	/*
-	 * Create default domain partitioning if cpusets are disabled.
-	 * Otherwise we let cpusets rebuild the domains based on the
-	 * current setup.
-	 */
-
-	/* The hotplug lock is already held by cpu_up/cpu_down */
-	arch_init_sched_domains(&cpu_online_map);
-#endif
-
-	return NOTIFY_OK;
 }
 
 void __init sched_init_smp(void)
@@ -7855,8 +7830,15 @@ void __init sched_init_smp(void)
 		cpu_set(smp_processor_id(), non_isolated_cpus);
 	mutex_unlock(&sched_domains_mutex);
 	put_online_cpus();
+
+#ifndef CONFIG_CPUSETS
 	/* XXX: Theoretical race here - CPU may be hotplugged now */
 	hotcpu_notifier(update_sched_domains, 0);
+#endif
+
+	/* RT runtime code needs to handle some hotplug events */
+	hotcpu_notifier(update_runtime, 0);
+
 	init_hrtick();
 
 	/* Move init over to a non-isolated CPU */
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index f2aa987027d..d924c679dfa 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1004,6 +1004,8 @@ static void yield_task_fair(struct rq *rq)
  * not idle and an idle cpu is available.  The span of cpus to
  * search starts with cpus closest then further out as needed,
  * so we always favor a closer, idle cpu.
+ * Domains may include CPUs that are not usable for migration,
+ * hence we need to mask them out (cpu_active_map)
  *
  * Returns the CPU we should wake onto.
  */
@@ -1031,6 +1033,7 @@ static int wake_idle(int cpu, struct task_struct *p)
 		    || ((sd->flags & SD_WAKE_IDLE_FAR)
 			&& !task_hot(p, task_rq(p)->clock, sd))) {
 			cpus_and(tmp, sd->span, p->cpus_allowed);
+			cpus_and(tmp, tmp, cpu_active_map);
 			for_each_cpu_mask(i, tmp) {
 				if (idle_cpu(i)) {
 					if (i != task_cpu(p)) {
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index d3d1cccb3d7..50735bb9614 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -933,6 +933,13 @@ static int find_lowest_rq(struct task_struct *task)
 	if (!cpupri_find(&task_rq(task)->rd->cpupri, task, lowest_mask))
 		return -1; /* No targets found */
 
+	/*
+	 * Only consider CPUs that are usable for migration.
+	 * I guess we might want to change cpupri_find() to ignore those
+	 * in the first place.
+	 */
+	cpus_and(*lowest_mask, *lowest_mask, cpu_active_map);
+
 	/*
 	 * At this point we have built a mask of cpus representing the
 	 * lowest priority tasks in the system.  Now we want to elect
-- 
cgit v1.2.3


From 39b0fad7121eace85770e7a4c6dc35dfd2879768 Mon Sep 17 00:00:00 2001
From: Max Krasnyansky <maxk@qualcomm.com>
Date: Tue, 15 Jul 2008 20:56:26 -0700
Subject: cpu hotplug: Make cpu_active_map synchronization dependency clear

This goes on top of the cpu_active_map (take 2) patch.

Currently we depend on the stop_machine to provide nescessesary
synchronization for the cpu_active_map updates.
As Dmitry Adamushko pointed this is fragile and is not much clearer
than the previous scheme. In other words we do not want to depend on
the internal stop machine operation here.
So make the synchronization rules clear by doing synchronize_sched()
after clearing out cpu active bit.

Tested on quad-Core2 with:

   while true; do
      for i in 1 2 3; do
        echo 0 > /sys/devices/system/cpu/cpu$i/online
      done
      for i in 1 2 3; do
        echo 1 > /sys/devices/system/cpu/cpu$i/online
      done
   done
and
   stress -c 200

No lockdep, preempt or other complaints.

Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/cpu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/kernel/cpu.c b/kernel/cpu.c
index a1ac7ea245d..033603c1d7c 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -301,6 +301,16 @@ int __ref cpu_down(unsigned int cpu)
 
 	cpu_clear(cpu, cpu_active_map);
 
+	/*
+	 * Make sure the all cpus did the reschedule and are not
+	 * using stale version of the cpu_active_map.
+	 * This is not strictly necessary becuase stop_machine()
+	 * that we run down the line already provides the required
+	 * synchronization. But it's really a side effect and we do not
+	 * want to depend on the innards of the stop_machine here.
+	 */
+	synchronize_sched();
+
 	err = _cpu_down(cpu, 0);
 
 	if (cpu_online(cpu))
-- 
cgit v1.2.3


From e59494f441c834ca7aaa0e6fa6678ddbd3d72743 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Wed, 16 Jul 2008 00:13:45 -0400
Subject: ftrace: fix 4d3702b6 (post-v2.6.26): WARNING: at
 kernel/lockdep.c:2731 check_flags (ftrace)

On Wed, 16 Jul 2008, Vegard Nossum wrote:

> When booting 4d3702b6, I got this huge thing:
>
> Testing tracer wakeup: <4>------------[ cut here ]------------
> WARNING: at kernel/lockdep.c:2731 check_flags+0x123/0x160()
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.26-crashing-02127-g4d3702b6 #30
>  [<c015c349>] warn_on_slowpath+0x59/0xb0
>  [<c01276c6>] ? ftrace_call+0x5/0x8
>  [<c012d800>] ? native_read_tsc+0x0/0x20
>  [<c0158de2>] ? sub_preempt_count+0x12/0xf0
>  [<c01814eb>] ? trace_hardirqs_off+0xb/0x10
>  [<c0182fbc>] ? __lock_acquire+0x2cc/0x1120
>  [<c01814eb>] ? trace_hardirqs_off+0xb/0x10
>  [<c01276af>] ? mcount_call+0x5/0xa
>  [<c017ff53>] check_flags+0x123/0x160
>  [<c0183e61>] lock_acquire+0x51/0xd0
>  [<c01276c6>] ? ftrace_call+0x5/0x8
>  [<c0613d4f>] _spin_lock_irqsave+0x5f/0xa0
>  [<c01a8d45>] ? ftrace_record_ip+0xf5/0x220
>  [<c02d5413>] ? debug_locks_off+0x3/0x50
>  [<c01a8d45>] ftrace_record_ip+0xf5/0x220
>  [<c01276af>] mcount_call+0x5/0xa
>  [<c02d5418>] ? debug_locks_off+0x8/0x50
>  [<c017ff27>] check_flags+0xf7/0x160
>  [<c0183e61>] lock_acquire+0x51/0xd0
>  [<c01276c6>] ? ftrace_call+0x5/0x8
>  [<c0613d4f>] _spin_lock_irqsave+0x5f/0xa0
>  [<c01affcd>] ? wakeup_tracer_call+0x6d/0xf0
>  [<c01625e2>] ? _local_bh_enable+0x62/0xb0
>  [<c0158ddd>] ? sub_preempt_count+0xd/0xf0
>  [<c01affcd>] wakeup_tracer_call+0x6d/0xf0
>  [<c0162724>] ? __do_softirq+0xf4/0x110
>  [<c01afff1>] ? wakeup_tracer_call+0x91/0xf0
>  [<c01276c6>] ftrace_call+0x5/0x8
>  [<c0162724>] ? __do_softirq+0xf4/0x110
>  [<c0158de2>] ? sub_preempt_count+0x12/0xf0
>  [<c01625e2>] _local_bh_enable+0x62/0xb0
>  [<c0162724>] __do_softirq+0xf4/0x110
>  [<c01627ed>] do_softirq+0xad/0xb0
>  [<c0162a15>] irq_exit+0xa5/0xb0
>  [<c013a506>] smp_apic_timer_interrupt+0x66/0xa0
>  [<c02d3fac>] ? trace_hardirqs_off_thunk+0xc/0x10
>  [<c0127449>] apic_timer_interrupt+0x2d/0x34
>  [<c018007b>] ? find_usage_backwards+0xb/0xf0
>  [<c0613a09>] ? _spin_unlock_irqrestore+0x69/0x80
>  [<c014ef32>] tg_shares_up+0x132/0x1d0
>  [<c014d2a2>] walk_tg_tree+0x62/0xa0
>  [<c014ee00>] ? tg_shares_up+0x0/0x1d0
>  [<c014a860>] ? tg_nop+0x0/0x10
>  [<c015499d>] update_shares+0x5d/0x80
>  [<c0154a2f>] try_to_wake_up+0x6f/0x280
>  [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0
>  [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0
>  [<c0154c94>] wake_up_process+0x14/0x20
>  [<c01725f6>] kthread_create+0x66/0xb0
>  [<c0195400>] ? do_stop+0x0/0x200
>  [<c0195320>] ? __stop_machine_run+0x30/0xb0
>  [<c0195340>] __stop_machine_run+0x50/0xb0
>  [<c0195400>] ? do_stop+0x0/0x200
>  [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0
>  [<c061242d>] ? mutex_unlock+0xd/0x10
>  [<c01953cc>] stop_machine_run+0x2c/0x60
>  [<c01a94d3>] unregister_ftrace_function+0x103/0x180
>  [<c01b0517>] stop_wakeup_tracer+0x17/0x60
>  [<c01b056f>] wakeup_tracer_ctrl_update+0xf/0x30
>  [<c01ab8d5>] trace_selftest_startup_wakeup+0xb5/0x130
>  [<c01ab950>] ? trace_wakeup_test_thread+0x0/0x70
>  [<c01aadf5>] register_tracer+0x135/0x1b0
>  [<c0877d02>] init_wakeup_tracer+0xd/0xf
>  [<c085d437>] kernel_init+0x1a9/0x2ce
>  [<c061397b>] ? _spin_unlock_irq+0x3b/0x60
>  [<c02d3f9c>] ? trace_hardirqs_on_thunk+0xc/0x10
>  [<c0877cf5>] ? init_wakeup_tracer+0x0/0xf
>  [<c0182646>] ? trace_hardirqs_on_caller+0x126/0x180
>  [<c02d3f9c>] ? trace_hardirqs_on_thunk+0xc/0x10
>  [<c01269c8>] ? restore_nocheck_notrace+0x0/0xe
>  [<c085d28e>] ? kernel_init+0x0/0x2ce
>  [<c085d28e>] ? kernel_init+0x0/0x2ce
>  [<c01275fb>] kernel_thread_helper+0x7/0x10
>  =======================
> ---[ end trace a7919e7f17c0a725 ]---
> irq event stamp: 579530
> hardirqs last  enabled at (579528): [<c01826ab>] trace_hardirqs_on+0xb/0x10
> hardirqs last disabled at (579529): [<c01814eb>] trace_hardirqs_off+0xb/0x10
> softirqs last  enabled at (579530): [<c0162724>] __do_softirq+0xf4/0x110
> softirqs last disabled at (579517): [<c01627ed>] do_softirq+0xad/0xb0
> irq event stamp: 579530
> hardirqs last  enabled at (579528): [<c01826ab>] trace_hardirqs_on+0xb/0x10
> hardirqs last disabled at (579529): [<c01814eb>] trace_hardirqs_off+0xb/0x10
> softirqs last  enabled at (579530): [<c0162724>] __do_softirq+0xf4/0x110
> softirqs last disabled at (579517): [<c01627ed>] do_softirq+0xad/0xb0
> PASSED
>
> Incidentally, the kernel also hung while I was typing in this report.

Things get weird between lockdep and ftrace because ftrace can be called
within lockdep internal code (via the mcount pointer) and lockdep can be
called with ftrace (via spin_locks).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace_sched_wakeup.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 3c8d61df447..e303ccb62cd 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -26,7 +26,8 @@ static struct task_struct	*wakeup_task;
 static int			wakeup_cpu;
 static unsigned			wakeup_prio = -1;
 
-static DEFINE_SPINLOCK(wakeup_lock);
+static raw_spinlock_t wakeup_lock =
+	(raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
 
 static void __wakeup_reset(struct trace_array *tr);
 
@@ -56,7 +57,8 @@ wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
 	if (unlikely(disabled != 1))
 		goto out;
 
-	spin_lock_irqsave(&wakeup_lock, flags);
+	local_irq_save(flags);
+	__raw_spin_lock(&wakeup_lock);
 
 	if (unlikely(!wakeup_task))
 		goto unlock;
@@ -71,7 +73,8 @@ wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
 	trace_function(tr, data, ip, parent_ip, flags);
 
  unlock:
-	spin_unlock_irqrestore(&wakeup_lock, flags);
+	__raw_spin_unlock(&wakeup_lock);
+	local_irq_restore(flags);
 
  out:
 	atomic_dec(&data->disabled);
@@ -145,7 +148,8 @@ wakeup_sched_switch(void *private, void *rq, struct task_struct *prev,
 	if (likely(disabled != 1))
 		goto out;
 
-	spin_lock_irqsave(&wakeup_lock, flags);
+	local_irq_save(flags);
+	__raw_spin_lock(&wakeup_lock);
 
 	/* We could race with grabbing wakeup_lock */
 	if (unlikely(!tracer_enabled || next != wakeup_task))
@@ -174,7 +178,8 @@ wakeup_sched_switch(void *private, void *rq, struct task_struct *prev,
 
 out_unlock:
 	__wakeup_reset(tr);
-	spin_unlock_irqrestore(&wakeup_lock, flags);
+	__raw_spin_unlock(&wakeup_lock);
+	local_irq_restore(flags);
 out:
 	atomic_dec(&tr->data[cpu]->disabled);
 }
@@ -209,8 +214,6 @@ static void __wakeup_reset(struct trace_array *tr)
 	struct trace_array_cpu *data;
 	int cpu;
 
-	assert_spin_locked(&wakeup_lock);
-
 	for_each_possible_cpu(cpu) {
 		data = tr->data[cpu];
 		tracing_reset(data);
@@ -229,9 +232,11 @@ static void wakeup_reset(struct trace_array *tr)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&wakeup_lock, flags);
+	local_irq_save(flags);
+	__raw_spin_lock(&wakeup_lock);
 	__wakeup_reset(tr);
-	spin_unlock_irqrestore(&wakeup_lock, flags);
+	__raw_spin_unlock(&wakeup_lock);
+	local_irq_restore(flags);
 }
 
 static void
@@ -252,7 +257,7 @@ wakeup_check_start(struct trace_array *tr, struct task_struct *p,
 		goto out;
 
 	/* interrupts should be off from try_to_wake_up */
-	spin_lock(&wakeup_lock);
+	__raw_spin_lock(&wakeup_lock);
 
 	/* check for races. */
 	if (!tracer_enabled || p->prio >= wakeup_prio)
@@ -274,7 +279,7 @@ wakeup_check_start(struct trace_array *tr, struct task_struct *p,
 		       CALLER_ADDR1, CALLER_ADDR2, flags);
 
 out_locked:
-	spin_unlock(&wakeup_lock);
+	__raw_spin_unlock(&wakeup_lock);
 out:
 	atomic_dec(&tr->data[cpu]->disabled);
 }
-- 
cgit v1.2.3


From 577b4a58d2e74a4d48050eeea3e3f952ce04eb86 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 11 Jul 2008 13:34:54 +0100
Subject: sched: fix warning in inc_rt_tasks() to not declare variable 'rq' if
 it's not needed

Fix inc_rt_tasks() to not declare variable 'rq' if it's not needed.  It is
declared if CONFIG_SMP or CONFIG_RT_GROUP_SCHED, but only used if CONFIG_SMP.

This is a consequence of patch 1f11eb6a8bc92536d9e93ead48fa3ffbd1478571 plus
patch 1100ac91b6af02d8639d518fad5b434b1bf44ed6.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_rt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 47ceac9e855..147004c651c 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -505,7 +505,9 @@ void inc_rt_tasks(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
 	rt_rq->rt_nr_running++;
 #if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
 	if (rt_se_prio(rt_se) < rt_rq->highest_prio) {
+#ifdef CONFIG_SMP
 		struct rq *rq = rq_of_rt_rq(rt_rq);
+#endif
 
 		rt_rq->highest_prio = rt_se_prio(rt_se);
 #ifdef CONFIG_SMP
-- 
cgit v1.2.3


From 1b427c153a08fdbc092c2bdbf845b92fda58d857 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 18 Jul 2008 14:01:39 +0200
Subject: sched: fix build error, provide partition_sched_domains()
 unconditionally
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

provide an empty partition_sched_domains() definition for the UP case:

 include/linux/cpuset.h: In function ‘rebuild_sched_domains':
 include/linux/cpuset.h:163: error: implicit declaration of function ‘partition_sched_domains'

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/sched.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index 1941d8b5cf1..26da921530f 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -824,7 +824,16 @@ extern void partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
 				    struct sched_domain_attr *dattr_new);
 extern int arch_reinit_sched_domains(void);
 
-#endif	/* CONFIG_SMP */
+#else /* CONFIG_SMP */
+
+struct sched_domain_attr;
+
+static inline void
+partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
+			struct sched_domain_attr *dattr_new)
+{
+}
+#endif	/* !CONFIG_SMP */
 
 struct io_context;			/* See blkdev.h */
 #define NGROUPS_SMALL		32
-- 
cgit v1.2.3


From 8b95d9172be7146c87e7a998310ce2919c851adc Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 14 Jul 2008 23:32:32 +0200
Subject: fix core/stacktrace changes on avr32, mips, sh

Fixes this type of problem:

  CC      arch/s390/kernel/stacktrace.o
arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration
arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration

caused by "stacktrace: export save_stack_trace[_tsk]"

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/avr32/kernel/stacktrace.c | 1 +
 arch/mips/kernel/stacktrace.c  | 1 +
 arch/sh/kernel/stacktrace.c    | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/avr32/kernel/stacktrace.c b/arch/avr32/kernel/stacktrace.c
index f4bdb448049..c09f0d8dd67 100644
--- a/arch/avr32/kernel/stacktrace.c
+++ b/arch/avr32/kernel/stacktrace.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 
 register unsigned long current_frame_pointer asm("r7");
 
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 5eb4681a73d..702e2e92a1c 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -7,6 +7,7 @@
  */
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
+#include <linux/module.h
 #include <asm/stacktrace.h>
 
 /*
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 1b2ae35c4a7..54d1f61aa00 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -12,6 +12,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 #include <asm/ptrace.h>
 
 /*
-- 
cgit v1.2.3


From b8f8c3cf0a4ac0632ec3f0e15e9dc0c29de917af Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 18 Jul 2008 17:27:28 +0200
Subject: nohz: prevent tick stop outside of the idle loop

Jack Ren and Eric Miao tracked down the following long standing
problem in the NOHZ code:

	scheduler switch to idle task
	enable interrupts

Window starts here

	----> interrupt happens (does not set NEED_RESCHED)
	      	irq_exit() stops the tick

	----> interrupt happens (does set NEED_RESCHED)

	return from schedule()

	cpu_idle(): preempt_disable();

Window ends here

The interrupts can happen at any point inside the race window. The
first interrupt stops the tick, the second one causes the scheduler to
rerun and switch away from idle again and we end up with the tick
disabled.

The fact that it needs two interrupts where the first one does not set
NEED_RESCHED and the second one does made the bug obscure and extremly
hard to reproduce and analyse. Kudos to Jack and Eric.

Solution: Limit the NOHZ functionality to the idle loop to make sure
that we can not run into such a situation ever again.

cpu_idle()
{
	preempt_disable();

	while(1) {
		 tick_nohz_stop_sched_tick(1); <- tell NOHZ code that we
		 			          are in the idle loop

		 while (!need_resched())
		       halt();

		 tick_nohz_restart_sched_tick(); <- disables NOHZ mode
		 preempt_enable_no_resched();
		 schedule();
		 preempt_disable();
	}
}

In hindsight we should have done this forever, but ...

/me grabs a large brown paperbag.

Debugged-by: Jack Ren <jack.ren@marvell.com>,
Debugged-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/arm/kernel/process.c              |  2 +-
 arch/avr32/kernel/process.c            |  2 +-
 arch/blackfin/kernel/process.c         |  2 +-
 arch/mips/kernel/process.c             |  2 +-
 arch/powerpc/kernel/idle.c             |  2 +-
 arch/powerpc/platforms/iseries/setup.c |  4 ++--
 arch/sh/kernel/process_32.c            |  2 +-
 arch/sparc64/kernel/process.c          |  2 +-
 arch/um/kernel/process.c               |  2 +-
 arch/x86/kernel/process_32.c           |  2 +-
 arch/x86/kernel/process_64.c           |  2 +-
 include/linux/tick.h                   |  5 +++--
 kernel/softirq.c                       |  2 +-
 kernel/time/tick-sched.c               | 12 ++++++++++--
 14 files changed, 26 insertions(+), 17 deletions(-)

diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 46bf2ede612..84f5a4c778f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -164,7 +164,7 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 		leds_event(led_idle_start);
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		leds_event(led_idle_end);
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 6cf9df17627..ff820a9e743 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -31,7 +31,7 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			cpu_idle_sleep();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 53c2cd25544..77800dd83e5 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -105,7 +105,7 @@ void cpu_idle(void)
 #endif
 		if (!idle)
 			idle = default_idle;
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 2c09a442e5e..bdead3aad25 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -53,7 +53,7 @@ void __noreturn cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 			extern void smtc_idle_loop_hook(void);
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index c3cf0e8f3ac..d308a9f70f1 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -60,7 +60,7 @@ void cpu_idle(void)
 
 	set_thread_flag(TIF_POLLING_NRFLAG);
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched() && !cpu_should_die()) {
 			ppc64_runlatch_off();
 
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index b72120751bb..70b688c1aef 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -561,7 +561,7 @@ static void yield_shared_processor(void)
 static void iseries_shared_idle(void)
 {
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched() && !hvlpevent_is_pending()) {
 			local_irq_disable();
 			ppc64_runlatch_off();
@@ -591,7 +591,7 @@ static void iseries_dedicated_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		if (!need_resched()) {
 			while (!need_resched()) {
 				ppc64_runlatch_off();
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index b98e37a1f54..921892c351d 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -86,7 +86,7 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 2084f81a76e..0798928ba36 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -97,7 +97,7 @@ void cpu_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while(1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 
 		while (!need_resched() && !cpu_is_offline(cpu))
 			sparc64_yield(cpu);
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 83603cfbde8..a1c6d07cac3 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -243,7 +243,7 @@ void default_idle(void)
 		if (need_resched())
 			schedule();
 
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		nsecs = disable_timer();
 		idle_sleep(nsecs);
 		tick_nohz_restart_sched_tick();
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index f8476dfbb60..1f5fa1cf16d 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -166,7 +166,7 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 			void (*idle)(void);
 
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e2319f39988..c0a5c2a687e 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -148,7 +148,7 @@ void cpu_idle(void)
 	current_thread_info()->status |= TS_POLLING;
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 			void (*idle)(void);
 
diff --git a/include/linux/tick.h b/include/linux/tick.h
index a881c652f7e..d3c02695dc5 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -49,6 +49,7 @@ struct tick_sched {
 	unsigned long			check_clocks;
 	enum tick_nohz_mode		nohz_mode;
 	ktime_t				idle_tick;
+	int				inidle;
 	int				tick_stopped;
 	unsigned long			idle_jiffies;
 	unsigned long			idle_calls;
@@ -105,14 +106,14 @@ static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
 #endif /* !CONFIG_GENERIC_CLOCKEVENTS */
 
 # ifdef CONFIG_NO_HZ
-extern void tick_nohz_stop_sched_tick(void);
+extern void tick_nohz_stop_sched_tick(int inidle);
 extern void tick_nohz_restart_sched_tick(void);
 extern void tick_nohz_update_jiffies(void);
 extern ktime_t tick_nohz_get_sleep_length(void);
 extern void tick_nohz_stop_idle(int cpu);
 extern u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time);
 # else
-static inline void tick_nohz_stop_sched_tick(void) { }
+static inline void tick_nohz_stop_sched_tick(int inidle) { }
 static inline void tick_nohz_restart_sched_tick(void) { }
 static inline void tick_nohz_update_jiffies(void) { }
 static inline ktime_t tick_nohz_get_sleep_length(void)
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 36e06174004..05f248039d7 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -312,7 +312,7 @@ void irq_exit(void)
 #ifdef CONFIG_NO_HZ
 	/* Make sure that timer wheel updates are propagated */
 	if (!in_interrupt() && idle_cpu(smp_processor_id()) && !need_resched())
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(0);
 	rcu_irq_exit();
 #endif
 	preempt_enable_no_resched();
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 86baa4f0dfe..ee962d11107 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -195,7 +195,7 @@ u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time)
  * Called either from the idle loop or from irq_exit() when an idle period was
  * just interrupted by an interrupt which did not cause a reschedule.
  */
-void tick_nohz_stop_sched_tick(void)
+void tick_nohz_stop_sched_tick(int inidle)
 {
 	unsigned long seq, last_jiffies, next_jiffies, delta_jiffies, flags;
 	struct tick_sched *ts;
@@ -224,6 +224,11 @@ void tick_nohz_stop_sched_tick(void)
 	if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
 		goto end;
 
+	if (!inidle && !ts->inidle)
+		goto end;
+
+	ts->inidle = 1;
+
 	if (need_resched())
 		goto end;
 
@@ -372,11 +377,14 @@ void tick_nohz_restart_sched_tick(void)
 	local_irq_disable();
 	tick_nohz_stop_idle(cpu);
 
-	if (!ts->tick_stopped) {
+	if (!ts->inidle || !ts->tick_stopped) {
+		ts->inidle = 0;
 		local_irq_enable();
 		return;
 	}
 
+	ts->inidle = 0;
+
 	rcu_exit_nohz();
 
 	/* Update jiffies first */
-- 
cgit v1.2.3


From 4dca10a96041f78bed11ce9e4a5cfde813ec4ccb Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Mon, 7 Jul 2008 18:37:04 -0700
Subject: softlockup: fix invalid proc_handler for softlockup_panic

The type of softlockup_panic is int, but the proc_handler is
proc_doulongvec_minmax(). This handler is for unsigned long.

This handler should be proc_dointvec_minmax().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sysctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 3e56d2f9141..ab59ac008ca 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -741,7 +741,7 @@ static struct ctl_table kern_table[] = {
 		.data		= &softlockup_panic,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_doulongvec_minmax,
+		.proc_handler	= &proc_dointvec_minmax,
 		.strategy	= &sysctl_intvec,
 		.extra1		= &zero,
 		.extra2		= &one,
-- 
cgit v1.2.3


From 8df185a95c9b84fc0c3c02224e64fdc5b83bae34 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 8 Jul 2008 15:55:48 -0700
Subject: kthread: reduce stack pressure in create_kthread and kthreadd

  * Replace:

  	set_cpus_allowed(..., CPU_MASK_ALL)

    with:

  	set_cpus_allowed_ptr(..., CPU_MASK_ALL_PTR)

    to remove excessive stack requirements when NR_CPUS=4096.

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/kthread.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/kthread.c b/kernel/kthread.c
index ac3fb732664..6111c27491b 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -106,7 +106,7 @@ static void create_kthread(struct kthread_create_info *create)
 		 */
 		sched_setscheduler(create->result, SCHED_NORMAL, &param);
 		set_user_nice(create->result, KTHREAD_NICE_LEVEL);
-		set_cpus_allowed(create->result, CPU_MASK_ALL);
+		set_cpus_allowed_ptr(create->result, CPU_MASK_ALL_PTR);
 	}
 	complete(&create->done);
 }
@@ -233,7 +233,7 @@ int kthreadd(void *unused)
 	set_task_comm(tsk, "kthreadd");
 	ignore_signals(tsk);
 	set_user_nice(tsk, KTHREAD_NICE_LEVEL);
-	set_cpus_allowed(tsk, CPU_MASK_ALL);
+	set_cpus_allowed_ptr(tsk, CPU_MASK_ALL_PTR);
 
 	current->flags |= PF_NOFREEZE | PF_FREEZER_NOSIG;
 
-- 
cgit v1.2.3


From 1e01cb0c6ff7e9ddb6547551794c6aa82785a7cb Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Tue, 15 Jul 2008 09:53:37 -0400
Subject: ftrace: only trace preempt off with preempt tracer

When PREEMPT_TRACER and IRQSOFF_TRACER are both configured and irqsoff
tracer is running, the preempt_off sections might also be traced.

Thanks to Andrew Morton for pointing out my mistake of spin_lock disabling
interrupts while he was reviewing ftrace.txt. Seems that my example I used
actually hit this bug.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace_irqsoff.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index 421d6fe3650..b1e4a89b08e 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -337,12 +337,14 @@ EXPORT_SYMBOL(trace_hardirqs_off_caller);
 #ifdef CONFIG_PREEMPT_TRACER
 void trace_preempt_on(unsigned long a0, unsigned long a1)
 {
-	stop_critical_timing(a0, a1);
+	if (preempt_trace())
+		stop_critical_timing(a0, a1);
 }
 
 void trace_preempt_off(unsigned long a0, unsigned long a1)
 {
-	start_critical_timing(a0, a1);
+	if (preempt_trace())
+		start_critical_timing(a0, a1);
 }
 #endif /* CONFIG_PREEMPT_TRACER */
 
-- 
cgit v1.2.3


From 65c011845316d3c1381f478ca0d8265c43b3b039 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 15 Jul 2008 14:14:30 -0700
Subject: cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr

  * This patch replaces the dangerous lvalue version of cpumask_of_cpu
    with new cpumask_of_cpu_ptr macros.  These are patterned after the
    node_to_cpumask_ptr macros.

    In general terms, if there is a cpumask_of_cpu_map[] then a pointer to
    the cpumask_of_cpu_map[cpu] entry is used.  The cpumask_of_cpu_map
    is provided when there is a large NR_CPUS count, reducing
    greatly the amount of code generated and stack space used for
    cpumask_of_cpu().  The pointer to the cpumask_t value is needed for
    calling set_cpus_allowed_ptr() to reduce the amount of stack space
    needed to pass the cpumask_t value.

    If there isn't a cpumask_of_cpu_map[], then a temporary variable is
    declared and filled in with value from cpumask_of_cpu(cpu) as well as
    a pointer variable pointing to this temporary variable.  Afterwards,
    the pointer is used to reference the cpumask value.  The compiler
    will optimize out the extra dereference through the pointer as well
    as the stack space used for the pointer, resulting in identical code.

    A good example of the orthogonal usages is in net/sunrpc/svc.c:

	case SVC_POOL_PERCPU:
	{
		unsigned int cpu = m->pool_to[pidx];
		cpumask_of_cpu_ptr(cpumask, cpu);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, cpumask);
		return 1;
	}
	case SVC_POOL_PERNODE:
	{
		unsigned int node = m->pool_to[pidx];
		node_to_cpumask_ptr(nodecpumask, node);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, nodecpumask);
		return 1;
	}

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/acpi/cstate.c                    |  3 ++-
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c       | 10 +++++---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c        | 15 +++++++----
 arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c |  9 ++++---
 arch/x86/kernel/cpu/cpufreq/speedstep-ich.c      |  3 ++-
 arch/x86/kernel/cpu/intel_cacheinfo.c            |  3 ++-
 arch/x86/kernel/microcode.c                      | 13 +++++++---
 arch/x86/kernel/reboot.c                         | 14 +++++++----
 drivers/acpi/processor_throttling.c              | 11 +++++---
 drivers/firmware/dcdbas.c                        |  3 ++-
 include/linux/cpumask.h                          | 32 ++++++++++++++++++++----
 kernel/stop_machine.c                            |  3 ++-
 kernel/trace/trace_sysprof.c                     |  4 ++-
 net/sunrpc/svc.c                                 |  3 ++-
 14 files changed, 91 insertions(+), 35 deletions(-)

diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index c2502eb9aa8..9220cf46aa1 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -73,6 +73,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
 	cpumask_t saved_mask;
+	cpumask_of_cpu_ptr(new_mask, cpu);
 	int retval;
 	unsigned int eax, ebx, ecx, edx;
 	unsigned int edx_part;
@@ -91,7 +92,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
 	/* Make sure we are running on right CPU */
 	saved_mask = current->cpus_allowed;
-	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	retval = set_cpus_allowed_ptr(current, new_mask);
 	if (retval)
 		return -1;
 
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index dd097b83583..ff2fff56f0a 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -200,10 +200,12 @@ static void drv_read(struct drv_cmd *cmd)
 static void drv_write(struct drv_cmd *cmd)
 {
 	cpumask_t saved_mask = current->cpus_allowed;
+	cpumask_of_cpu_ptr_declare(cpu_mask);
 	unsigned int i;
 
 	for_each_cpu_mask_nr(i, cmd->mask) {
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
+		cpumask_of_cpu_ptr_next(cpu_mask, i);
+		set_cpus_allowed_ptr(current, cpu_mask);
 		do_drv_write(cmd);
 	}
 
@@ -267,11 +269,12 @@ static unsigned int get_measured_perf(unsigned int cpu)
 	} aperf_cur, mperf_cur;
 
 	cpumask_t saved_mask;
+	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	unsigned int perf_percent;
 	unsigned int retval;
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpu_mask);
 	if (get_cpu() != cpu) {
 		/* We were not able to run on requested processor */
 		put_cpu();
@@ -337,6 +340,7 @@ static unsigned int get_measured_perf(unsigned int cpu)
 
 static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 {
+	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	struct acpi_cpufreq_data *data = per_cpu(drv_data, cpu);
 	unsigned int freq;
 	unsigned int cached_freq;
@@ -349,7 +353,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 	}
 
 	cached_freq = data->freq_table[data->acpi_data->state].frequency;
-	freq = extract_freq(get_cur_val(&cpumask_of_cpu(cpu)), data);
+	freq = extract_freq(get_cur_val(cpu_mask), data);
 	if (freq != cached_freq) {
 		/*
 		 * The dreaded BIOS frequency change behind our back.
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index c45ca6d4dce..53c7b693697 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -479,11 +479,12 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 static int check_supported_cpu(unsigned int cpu)
 {
 	cpumask_t oldmask;
+	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	u32 eax, ebx, ecx, edx;
 	unsigned int rc = 0;
 
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpu_mask);
 
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
@@ -1016,6 +1017,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
 {
 	cpumask_t oldmask;
+	cpumask_of_cpu_ptr(cpu_mask, pol->cpu);
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 	u32 checkfid;
 	u32 checkvid;
@@ -1030,7 +1032,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
+	set_cpus_allowed_ptr(current, cpu_mask);
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1105,6 +1107,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask;
+	cpumask_of_cpu_ptr_declare(newmask);
 	int rc;
 
 	if (!cpu_online(pol->cpu))
@@ -1156,7 +1159,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
+	cpumask_of_cpu_ptr_next(newmask, pol->cpu);
+	set_cpus_allowed_ptr(current, newmask);
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1178,7 +1182,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	set_cpus_allowed_ptr(current, &oldmask);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cpus = cpumask_of_cpu(pol->cpu);
+		pol->cpus = *newmask;
 	else
 		pol->cpus = per_cpu(cpu_core_map, pol->cpu);
 	data->available_cores = &(pol->cpus);
@@ -1244,6 +1248,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask = current->cpus_allowed;
+	cpumask_of_cpu_ptr(newmask, cpu);
 	unsigned int khz = 0;
 	unsigned int first;
 
@@ -1253,7 +1258,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 	if (!data)
 		return -EINVAL;
 
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, newmask);
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX
 			"limiting to CPU %d failed in powernowk8_get\n", cpu);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 8b0dd6f2a1a..fd561bb26c6 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -313,9 +313,10 @@ static unsigned int get_cur_freq(unsigned int cpu)
 	unsigned l, h;
 	unsigned clock_freq;
 	cpumask_t saved_mask;
+	cpumask_of_cpu_ptr(new_mask, cpu);
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, new_mask);
 	if (smp_processor_id() != cpu)
 		return 0;
 
@@ -554,9 +555,11 @@ static int centrino_target (struct cpufreq_policy *policy,
 		 */
 
 		if (!cpus_empty(covered_cpus)) {
+			cpumask_of_cpu_ptr_declare(new_mask);
+
 			for_each_cpu_mask_nr(j, covered_cpus) {
-				set_cpus_allowed_ptr(current,
-						     &cpumask_of_cpu(j));
+				cpumask_of_cpu_ptr_next(new_mask, j);
+				set_cpus_allowed_ptr(current, new_mask);
 				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
 			}
 		}
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 191f7263c61..2f3728dc24f 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -244,7 +244,8 @@ static unsigned int _speedstep_get(const cpumask_t *cpus)
 
 static unsigned int speedstep_get(unsigned int cpu)
 {
-	return _speedstep_get(&cpumask_of_cpu(cpu));
+	cpumask_of_cpu_ptr(newmask, cpu);
+	return _speedstep_get(newmask);
 }
 
 /**
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index a7b0f8f1736..e4b8d189d7e 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -516,6 +516,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 	unsigned long		j;
 	int			retval;
 	cpumask_t		oldmask;
+	cpumask_of_cpu_ptr(newmask, cpu);
 
 	if (num_cache_leaves == 0)
 		return -ENOENT;
@@ -526,7 +527,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 		return -ENOMEM;
 
 	oldmask = current->cpus_allowed;
-	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	retval = set_cpus_allowed_ptr(current, newmask);
 	if (retval)
 		goto out;
 
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 56b933119a0..58520169e35 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -388,6 +388,7 @@ static int do_microcode_update (void)
 	void *new_mc = NULL;
 	int cpu;
 	cpumask_t old;
+	cpumask_of_cpu_ptr_declare(newmask);
 
 	old = current->cpus_allowed;
 
@@ -404,7 +405,8 @@ static int do_microcode_update (void)
 
 			if (!uci->valid)
 				continue;
-			set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+			cpumask_of_cpu_ptr_next(newmask, cpu);
+			set_cpus_allowed_ptr(current, newmask);
 			error = get_maching_microcode(new_mc, cpu);
 			if (error < 0)
 				goto out;
@@ -574,6 +576,7 @@ static int apply_microcode_check_cpu(int cpu)
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	cpumask_t old;
+	cpumask_of_cpu_ptr(newmask, cpu);
 	unsigned int val[2];
 	int err = 0;
 
@@ -582,7 +585,7 @@ static int apply_microcode_check_cpu(int cpu)
 		return 0;
 
 	old = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, newmask);
 
 	/* Check if the microcode we have in memory matches the CPU */
 	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
@@ -620,11 +623,12 @@ static int apply_microcode_check_cpu(int cpu)
 static void microcode_init_cpu(int cpu, int resume)
 {
 	cpumask_t old;
+	cpumask_of_cpu_ptr(newmask, cpu);
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
 	old = current->cpus_allowed;
 
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, newmask);
 	mutex_lock(&microcode_mutex);
 	collect_cpu_info(cpu);
 	if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
@@ -656,11 +660,12 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
 		return -EINVAL;
 	if (val == 1) {
 		cpumask_t old;
+		cpumask_of_cpu_ptr(newmask, cpu);
 
 		old = current->cpus_allowed;
 
 		get_online_cpus();
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+		set_cpus_allowed_ptr(current, newmask);
 
 		mutex_lock(&microcode_mutex);
 		if (uci->valid)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f8a62160e15..214bbdfc851 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -403,24 +403,28 @@ void native_machine_shutdown(void)
 {
 	/* Stop the cpus and apics */
 #ifdef CONFIG_SMP
-	int reboot_cpu_id;
 
 	/* The boot cpu is always logical cpu 0 */
-	reboot_cpu_id = 0;
+	int reboot_cpu_id = 0;
+	cpumask_of_cpu_ptr(newmask, reboot_cpu_id);
 
 #ifdef CONFIG_X86_32
 	/* See if there has been given a command line override */
 	if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
-		cpu_online(reboot_cpu))
+		cpu_online(reboot_cpu)) {
 		reboot_cpu_id = reboot_cpu;
+		cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
+	}
 #endif
 
 	/* Make certain the cpu I'm about to reboot on is online */
-	if (!cpu_online(reboot_cpu_id))
+	if (!cpu_online(reboot_cpu_id)) {
 		reboot_cpu_id = smp_processor_id();
+		cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
+	}
 
 	/* Make certain I only run on the appropriate processor */
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(reboot_cpu_id));
+	set_cpus_allowed_ptr(current, newmask);
 
 	/* O.K Now that I'm on the appropriate processor,
 	 * stop all of the others.
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index a56fc6c4394..a2c3f9cfa54 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -827,6 +827,7 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 static int acpi_processor_get_throttling(struct acpi_processor *pr)
 {
 	cpumask_t saved_mask;
+	cpumask_of_cpu_ptr_declare(new_mask);
 	int ret;
 
 	if (!pr)
@@ -838,7 +839,8 @@ static int acpi_processor_get_throttling(struct acpi_processor *pr)
 	 * Migrate task to the cpu pointed by pr.
 	 */
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id));
+	cpumask_of_cpu_ptr_next(new_mask, pr->id);
+	set_cpus_allowed_ptr(current, new_mask);
 	ret = pr->throttling.acpi_processor_get_throttling(pr);
 	/* restore the previous state */
 	set_cpus_allowed_ptr(current, &saved_mask);
@@ -987,6 +989,7 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr,
 int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 {
 	cpumask_t saved_mask;
+	cpumask_of_cpu_ptr_declare(new_mask);
 	int ret = 0;
 	unsigned int i;
 	struct acpi_processor *match_pr;
@@ -1025,7 +1028,8 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 	 * it can be called only for the cpu pointed by pr.
 	 */
 	if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) {
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(pr->id));
+		cpumask_of_cpu_ptr_next(new_mask, pr->id);
+		set_cpus_allowed_ptr(current, new_mask);
 		ret = p_throttling->acpi_processor_set_throttling(pr,
 						t_state.target_state);
 	} else {
@@ -1056,7 +1060,8 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state)
 				continue;
 			}
 			t_state.cpu = i;
-			set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
+			cpumask_of_cpu_ptr_next(new_mask, i);
+			set_cpus_allowed_ptr(current, new_mask);
 			ret = match_pr->throttling.
 				acpi_processor_set_throttling(
 				match_pr, t_state.target_state);
diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
index 25918f7dfd0..0b624e927a6 100644
--- a/drivers/firmware/dcdbas.c
+++ b/drivers/firmware/dcdbas.c
@@ -254,6 +254,7 @@ static ssize_t host_control_on_shutdown_store(struct device *dev,
 static int smi_request(struct smi_cmd *smi_cmd)
 {
 	cpumask_t old_mask;
+	cpumask_of_cpu_ptr(new_mask, 0);
 	int ret = 0;
 
 	if (smi_cmd->magic != SMI_CMD_MAGIC) {
@@ -264,7 +265,7 @@ static int smi_request(struct smi_cmd *smi_cmd)
 
 	/* SMI requires CPU 0 */
 	old_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(0));
+	set_cpus_allowed_ptr(current, new_mask);
 	if (smp_processor_id() != 0) {
 		dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n",
 			__func__);
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 80226e77614..2dbd9a287e7 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -62,6 +62,15 @@
  * int next_cpu_nr(cpu, mask)		Next cpu past 'cpu', or nr_cpu_ids
  *
  * cpumask_t cpumask_of_cpu(cpu)	Return cpumask with bit 'cpu' set
+ *ifdef CONFIG_HAS_CPUMASK_OF_CPU
+ * cpumask_of_cpu_ptr_declare(v)	Declares cpumask_t *v
+ * cpumask_of_cpu_ptr_next(v, cpu)	Sets v = &cpumask_of_cpu_map[cpu]
+ * cpumask_of_cpu_ptr(v, cpu)		Combines above two operations
+ *else
+ * cpumask_of_cpu_ptr_declare(v)	Declares cpumask_t _v and *v = &_v
+ * cpumask_of_cpu_ptr_next(v, cpu)	Sets _v = cpumask_of_cpu(cpu)
+ * cpumask_of_cpu_ptr(v, cpu)		Combines above two operations
+ *endif
  * CPU_MASK_ALL				Initializer - all bits set
  * CPU_MASK_NONE			Initializer - no bits set
  * unsigned long *cpus_addr(mask)	Array of unsigned long's in mask
@@ -236,11 +245,16 @@ static inline void __cpus_shift_left(cpumask_t *dstp,
 
 #ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
 extern cpumask_t *cpumask_of_cpu_map;
-#define cpumask_of_cpu(cpu)    (cpumask_of_cpu_map[cpu])
-
+#define cpumask_of_cpu(cpu)	(cpumask_of_cpu_map[cpu])
+#define	cpumask_of_cpu_ptr(v, cpu)					\
+		const cpumask_t *v = &cpumask_of_cpu(cpu)
+#define	cpumask_of_cpu_ptr_declare(v)					\
+		const cpumask_t *v
+#define cpumask_of_cpu_ptr_next(v, cpu)					\
+					v = &cpumask_of_cpu(cpu)
 #else
 #define cpumask_of_cpu(cpu)						\
-(*({									\
+({									\
 	typeof(_unused_cpumask_arg_) m;					\
 	if (sizeof(m) == sizeof(unsigned long)) {			\
 		m.bits[0] = 1UL<<(cpu);					\
@@ -248,8 +262,16 @@ extern cpumask_t *cpumask_of_cpu_map;
 		cpus_clear(m);						\
 		cpu_set((cpu), m);					\
 	}								\
-	&m;								\
-}))
+	m;								\
+})
+#define	cpumask_of_cpu_ptr(v, cpu) 					\
+		cpumask_t _##v = cpumask_of_cpu(cpu);			\
+		const cpumask_t *v = &_##v
+#define	cpumask_of_cpu_ptr_declare(v)					\
+		cpumask_t _##v;						\
+		const cpumask_t *v = &_##v
+#define cpumask_of_cpu_ptr_next(v, cpu)					\
+					_##v = cpumask_of_cpu(cpu)
 #endif
 
 #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index ba9b2054ecb..738b411ff2d 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -33,8 +33,9 @@ static int stopmachine(void *cpu)
 {
 	int irqs_disabled = 0;
 	int prepared = 0;
+	cpumask_of_cpu_ptr(cpumask, (int)(long)cpu);
 
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu((int)(long)cpu));
+	set_cpus_allowed_ptr(current, cpumask);
 
 	/* Ack: we are alive */
 	smp_mb(); /* Theoretically the ack = 0 might not be on this CPU yet. */
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index 2301e1e7c60..63528086337 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -213,7 +213,9 @@ static void start_stack_timers(void)
 	int cpu;
 
 	for_each_online_cpu(cpu) {
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+		cpumask_of_cpu_ptr(new_mask, cpu);
+
+		set_cpus_allowed_ptr(current, new_mask);
 		start_stack_timer(cpu);
 	}
 	set_cpus_allowed_ptr(current, &saved_mask);
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index d43cf8ddff6..083d1268813 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -314,9 +314,10 @@ svc_pool_map_set_cpumask(unsigned int pidx, cpumask_t *oldmask)
 	case SVC_POOL_PERCPU:
 	{
 		unsigned int cpu = m->pool_to[pidx];
+		cpumask_of_cpu_ptr(cpumask, cpu);
 
 		*oldmask = current->cpus_allowed;
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+		set_cpus_allowed_ptr(current, cpumask);
 		return 1;
 	}
 	case SVC_POOL_PERNODE:
-- 
cgit v1.2.3


From cb6d2be60dc3ec9ac788f45d8e24b82a9faacdd9 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 15 Jul 2008 14:14:31 -0700
Subject: cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c

  * Optimize various places where a pointer to the cpumask_of_cpu value
    will result in reducing stack pressure.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/io_apic_64.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index bf27114773d..a85db790754 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -1372,12 +1372,10 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 static int ioapic_retrigger_irq(unsigned int irq)
 {
 	struct irq_cfg *cfg = &irq_cfg[irq];
-	cpumask_t mask;
 	unsigned long flags;
 
 	spin_lock_irqsave(&vector_lock, flags);
-	mask = cpumask_of_cpu(first_cpu(cfg->domain));
-	send_IPI_mask(mask, cfg->vector);
+	send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
 	spin_unlock_irqrestore(&vector_lock, flags);
 
 	return 1;
-- 
cgit v1.2.3


From c42f4f4c6dab3b2b7768c36173ee7c7ecf79eddb Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 15 Jul 2008 14:14:32 -0700
Subject: cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c

  * Optimize various places where a pointer to the cpumask_of_cpu value
    will result in reducing stack pressure.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/ldt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index a8449571858..3fee2aa50f3 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -62,12 +62,12 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 
 	if (reload) {
 #ifdef CONFIG_SMP
-		cpumask_t mask;
+		cpumask_of_cpu_ptr_declare(mask);
 
 		preempt_disable();
 		load_LDT(pc);
-		mask = cpumask_of_cpu(smp_processor_id());
-		if (!cpus_equal(current->mm->cpu_vm_mask, mask))
+		cpumask_of_cpu_ptr_next(mask, smp_processor_id());
+		if (!cpus_equal(current->mm->cpu_vm_mask, *mask))
 			smp_call_function(flush_ldt, current->mm, 1);
 		preempt_enable();
 #else
-- 
cgit v1.2.3


From 333cdd1f0e5e0aad6b7f8992291563bc7b14670b Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 15 Jul 2008 14:14:33 -0700
Subject: cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c

  * Optimize various places where a pointer to the cpumask_of_cpu value
    will result in reducing stack pressure.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/misc/sgi-xp/xpc_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 08256ed0d9a..579b01ff82d 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -229,10 +229,11 @@ xpc_hb_checker(void *ignore)
 	int last_IRQ_count = 0;
 	int new_IRQ_count;
 	int force_IRQ = 0;
+	cpumask_of_cpu_ptr(cpumask, XPC_HB_CHECK_CPU);
 
 	/* this thread was marked active by xpc_hb_init() */
 
-	set_cpus_allowed(current, cpumask_of_cpu(XPC_HB_CHECK_CPU));
+	set_cpus_allowed_ptr(current, cpumask);
 
 	/* set our heartbeating to other partitions into motion */
 	xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
-- 
cgit v1.2.3


From c18a41fbbc500ac0307ffd2b0ae73c2af9d0b0ab Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 15 Jul 2008 14:14:34 -0700
Subject: cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c

  * Optimize various places where a pointer to the cpumask_of_cpu value
    will result in reducing stack pressure.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/time/tick-common.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 4f3886562b8..bf43284d685 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -135,7 +135,7 @@ void tick_setup_periodic(struct clock_event_device *dev, int broadcast)
  */
 static void tick_setup_device(struct tick_device *td,
 			      struct clock_event_device *newdev, int cpu,
-			      cpumask_t cpumask)
+			      const cpumask_t *cpumask)
 {
 	ktime_t next_event;
 	void (*handler)(struct clock_event_device *) = NULL;
@@ -169,8 +169,8 @@ static void tick_setup_device(struct tick_device *td,
 	 * When the device is not per cpu, pin the interrupt to the
 	 * current cpu:
 	 */
-	if (!cpus_equal(newdev->cpumask, cpumask))
-		irq_set_affinity(newdev->irq, cpumask);
+	if (!cpus_equal(newdev->cpumask, *cpumask))
+		irq_set_affinity(newdev->irq, *cpumask);
 
 	/*
 	 * When global broadcasting is active, check if the current
@@ -196,20 +196,20 @@ static int tick_check_new_device(struct clock_event_device *newdev)
 	struct tick_device *td;
 	int cpu, ret = NOTIFY_OK;
 	unsigned long flags;
-	cpumask_t cpumask;
+	cpumask_of_cpu_ptr_declare(cpumask);
 
 	spin_lock_irqsave(&tick_device_lock, flags);
 
 	cpu = smp_processor_id();
+	cpumask_of_cpu_ptr_next(cpumask, cpu);
 	if (!cpu_isset(cpu, newdev->cpumask))
 		goto out_bc;
 
 	td = &per_cpu(tick_cpu_device, cpu);
 	curdev = td->evtdev;
-	cpumask = cpumask_of_cpu(cpu);
 
 	/* cpu local device ? */
-	if (!cpus_equal(newdev->cpumask, cpumask)) {
+	if (!cpus_equal(newdev->cpumask, *cpumask)) {
 
 		/*
 		 * If the cpu affinity of the device interrupt can not
@@ -222,7 +222,7 @@ static int tick_check_new_device(struct clock_event_device *newdev)
 		 * If we have a cpu local device already, do not replace it
 		 * by a non cpu local device
 		 */
-		if (curdev && cpus_equal(curdev->cpumask, cpumask))
+		if (curdev && cpus_equal(curdev->cpumask, *cpumask))
 			goto out_bc;
 	}
 
-- 
cgit v1.2.3


From 4755b9291204982ac908e069674d6e5eb45815b3 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 15 Jul 2008 14:14:35 -0700
Subject: cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c

  * Optimize various places where a pointer to the cpumask_of_cpu value
    will result in reducing stack pressure.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 lib/smp_processor_id.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c
index 3b4dc098181..9fb2df0d8df 100644
--- a/lib/smp_processor_id.c
+++ b/lib/smp_processor_id.c
@@ -11,7 +11,7 @@ notrace unsigned int debug_smp_processor_id(void)
 {
 	unsigned long preempt_count = preempt_count();
 	int this_cpu = raw_smp_processor_id();
-	cpumask_t this_mask;
+	cpumask_of_cpu_ptr_declare(this_mask);
 
 	if (likely(preempt_count))
 		goto out;
@@ -23,9 +23,9 @@ notrace unsigned int debug_smp_processor_id(void)
 	 * Kernel threads bound to a single CPU can safely use
 	 * smp_processor_id():
 	 */
-	this_mask = cpumask_of_cpu(this_cpu);
+	cpumask_of_cpu_ptr_next(this_mask, cpu);
 
-	if (cpus_equal(current->cpus_allowed, this_mask))
+	if (cpus_equal(current->cpus_allowed, *this_mask))
 		goto out;
 
 	/*
-- 
cgit v1.2.3


From 77586c2bdad0798cb24e35de5a878e7c6b200574 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 15 Jul 2008 14:14:36 -0700
Subject: cpumask: Provide a generic set of CPUMASK_ALLOC macros

  * Provide a generic set of CPUMASK_ALLOC macros patterned after the
    SCHED_CPUMASK_ALLOC macros.  This is used where multiple cpumask_t
    variables are declared on the stack to reduce the amount of stack
    space required.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/cpumask.h | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 2dbd9a287e7..72f9c32c12b 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -75,6 +75,17 @@
  * CPU_MASK_NONE			Initializer - no bits set
  * unsigned long *cpus_addr(mask)	Array of unsigned long's in mask
  *
+ *if NR_CPUS > BITS_PER_LONG
+ *   CPUMASK_ALLOC(m)			Declares and allocates struct m *m =
+ *					   (struct m *)kmalloc(sizeof(*m), ...)
+ *   CPUMASK_FREE(m)			Macro for kfree(v)
+ *else
+ *   CPUMASK_ALLOC(m)			Declares struct m _m, *m = &_m
+ *   CPUMASK_FREE(m)			Nop
+ *endif
+ *   CPUMASK_VAR(v, m)			Declares cpumask_t *v =
+ *						m + offset(struct m, v)
+ *
  * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing
  * int cpumask_parse_user(ubuf, ulen, mask)	Parse ascii string as cpumask
  * int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing
@@ -311,6 +322,16 @@ extern cpumask_t cpu_mask_all;
 
 #define cpus_addr(src) ((src).bits)
 
+#if NR_CPUS > BITS_PER_LONG
+#define	CPUMASK_ALLOC(m)	struct m *m = kmalloc(sizeof(*m), GFP_KERNEL)
+#define	CPUMASK_FREE(m)		kfree(m)
+#else
+#define	CPUMASK_ALLOC(m)	struct allmasks _m, *m = &_m
+#define	CPUMASK_FREE(m)
+#endif
+#define	CPUMASK_VAR(v, m) 	cpumask_t *v = (cpumask_t *)		\
+				((unsigned long)(m) + offsetof(struct m, v))
+
 #define cpumask_scnprintf(buf, len, src) \
 			__cpumask_scnprintf((buf), (len), &(src), NR_CPUS)
 static inline int __cpumask_scnprintf(char *buf, int len,
-- 
cgit v1.2.3


From eb53fac5cafc4b2f8443ff064938b4494a28c54e Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 15 Jul 2008 14:14:37 -0700
Subject: cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target

  * Use the CPUMASK_ALLOC macros in the centrino_target() function.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 73 +++++++++++++++---------
 1 file changed, 45 insertions(+), 28 deletions(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index fd561bb26c6..470c016cb25 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -442,6 +442,13 @@ static int centrino_verify (struct cpufreq_policy *policy)
  *
  * Sets a new CPUFreq policy.
  */
+struct allmasks {
+	cpumask_t		online_policy_cpus;
+	cpumask_t		saved_mask;
+	cpumask_t		set_mask;
+	cpumask_t		covered_cpus;
+};
+
 static int centrino_target (struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
@@ -449,48 +456,55 @@ static int centrino_target (struct cpufreq_policy *policy,
 	unsigned int    newstate = 0;
 	unsigned int	msr, oldmsr = 0, h = 0, cpu = policy->cpu;
 	struct cpufreq_freqs	freqs;
-	cpumask_t		online_policy_cpus;
-	cpumask_t		saved_mask;
-	cpumask_t		set_mask;
-	cpumask_t		covered_cpus;
 	int			retval = 0;
 	unsigned int		j, k, first_cpu, tmp;
-
-	if (unlikely(centrino_model[cpu] == NULL))
-		return -ENODEV;
+	CPUMASK_ALLOC(allmasks);
+	CPUMASK_VAR(online_policy_cpus, allmasks);
+	CPUMASK_VAR(saved_mask, allmasks);
+	CPUMASK_VAR(set_mask, allmasks);
+	CPUMASK_VAR(covered_cpus, allmasks);
+
+	if (unlikely(allmasks == NULL))
+		return -ENOMEM;
+
+	if (unlikely(centrino_model[cpu] == NULL)) {
+		retval = -ENODEV;
+		goto out;
+	}
 
 	if (unlikely(cpufreq_frequency_table_target(policy,
 			centrino_model[cpu]->op_points,
 			target_freq,
 			relation,
 			&newstate))) {
-		return -EINVAL;
+		retval = -EINVAL;
+		goto out;
 	}
 
 #ifdef CONFIG_HOTPLUG_CPU
 	/* cpufreq holds the hotplug lock, so we are safe from here on */
-	cpus_and(online_policy_cpus, cpu_online_map, policy->cpus);
+	cpus_and(*online_policy_cpus, cpu_online_map, policy->cpus);
 #else
-	online_policy_cpus = policy->cpus;
+	*online_policy_cpus = policy->cpus;
 #endif
 
-	saved_mask = current->cpus_allowed;
+	*saved_mask = current->cpus_allowed;
 	first_cpu = 1;
-	cpus_clear(covered_cpus);
-	for_each_cpu_mask_nr(j, online_policy_cpus) {
+	cpus_clear(*covered_cpus);
+	for_each_cpu_mask_nr(j, *online_policy_cpus) {
 		/*
 		 * Support for SMP systems.
 		 * Make sure we are running on CPU that wants to change freq
 		 */
-		cpus_clear(set_mask);
+		cpus_clear(*set_mask);
 		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-			cpus_or(set_mask, set_mask, online_policy_cpus);
+			cpus_or(*set_mask, *set_mask, *online_policy_cpus);
 		else
-			cpu_set(j, set_mask);
+			cpu_set(j, *set_mask);
 
-		set_cpus_allowed_ptr(current, &set_mask);
+		set_cpus_allowed_ptr(current, set_mask);
 		preempt_disable();
-		if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
+		if (unlikely(!cpu_isset(smp_processor_id(), *set_mask))) {
 			dprintk("couldn't limit to CPUs in this domain\n");
 			retval = -EAGAIN;
 			if (first_cpu) {
@@ -518,7 +532,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
 				target_freq, freqs.old, freqs.new, msr);
 
-			for_each_cpu_mask_nr(k, online_policy_cpus) {
+			for_each_cpu_mask_nr(k, *online_policy_cpus) {
 				freqs.cpu = k;
 				cpufreq_notify_transition(&freqs,
 					CPUFREQ_PRECHANGE);
@@ -537,11 +551,11 @@ static int centrino_target (struct cpufreq_policy *policy,
 			break;
 		}
 
-		cpu_set(j, covered_cpus);
+		cpu_set(j, *covered_cpus);
 		preempt_enable();
 	}
 
-	for_each_cpu_mask_nr(k, online_policy_cpus) {
+	for_each_cpu_mask_nr(k, *online_policy_cpus) {
 		freqs.cpu = k;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -554,10 +568,10 @@ static int centrino_target (struct cpufreq_policy *policy,
 		 * Best effort undo..
 		 */
 
-		if (!cpus_empty(covered_cpus)) {
+		if (!cpus_empty(*covered_cpus)) {
 			cpumask_of_cpu_ptr_declare(new_mask);
 
-			for_each_cpu_mask_nr(j, covered_cpus) {
+			for_each_cpu_mask_nr(j, *covered_cpus) {
 				cpumask_of_cpu_ptr_next(new_mask, j);
 				set_cpus_allowed_ptr(current, new_mask);
 				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
@@ -567,19 +581,22 @@ static int centrino_target (struct cpufreq_policy *policy,
 		tmp = freqs.new;
 		freqs.new = freqs.old;
 		freqs.old = tmp;
-		for_each_cpu_mask_nr(j, online_policy_cpus) {
+		for_each_cpu_mask_nr(j, *online_policy_cpus) {
 			freqs.cpu = j;
 			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 		}
 	}
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return 0;
+	set_cpus_allowed_ptr(current, saved_mask);
+	retval = 0;
+	goto out;
 
 migrate_end:
 	preempt_enable();
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return 0;
+	set_cpus_allowed_ptr(current, saved_mask);
+out:
+	CPUMASK_FREE(allmasks);
+	return retval;
 }
 
 static struct freq_attr* centrino_attr[] = {
-- 
cgit v1.2.3


From 06f8d00e9eecb738c99b737ac38a585ea7583ad5 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 18 Jul 2008 22:34:00 +0200
Subject: cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix

fix typo.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 lib/smp_processor_id.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c
index 9fb2df0d8df..c4381d9516f 100644
--- a/lib/smp_processor_id.c
+++ b/lib/smp_processor_id.c
@@ -23,7 +23,7 @@ notrace unsigned int debug_smp_processor_id(void)
 	 * Kernel threads bound to a single CPU can safely use
 	 * smp_processor_id():
 	 */
-	cpumask_of_cpu_ptr_next(this_mask, cpu);
+	cpumask_of_cpu_ptr_next(this_mask, this_cpu);
 
 	if (cpus_equal(current->cpus_allowed, *this_mask))
 		goto out;
-- 
cgit v1.2.3


From 5d481f497559245ecfb1b95cafe39bfbf037fda5 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Sat, 19 Jul 2008 14:51:31 +0800
Subject: Blackfin arch:  change L1 malloc to base on slab cache and lists.

Remove the sram piece limitation and improve the performance to
alloc/free sram piece data.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mm/blackfin_sram.c | 395 +++++++++++++++++++++++----------------
 arch/blackfin/mm/blackfin_sram.h |   4 +-
 arch/blackfin/mm/init.c          |  12 +-
 3 files changed, 248 insertions(+), 163 deletions(-)

diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index 8f6fdc24533..b58cf196d7c 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -41,215 +41,276 @@
 #include <asm/blackfin.h>
 #include "blackfin_sram.h"
 
-spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
-
-#if CONFIG_L1_MAX_PIECE < 16
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        16
-#endif
-
-#if CONFIG_L1_MAX_PIECE > 1024
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        1024
-#endif
-
-#define SRAM_SLT_NULL      0
-#define SRAM_SLT_FREE      1
-#define SRAM_SLT_ALLOCATED 2
+static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
 
 /* the data structure for L1 scratchpad and DATA SRAM */
-struct l1_sram_piece {
+struct sram_piece {
 	void *paddr;
 	int size;
-	int flag;
 	pid_t pid;
+	struct sram_piece *next;
 };
 
-static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
 
 #if L1_DATA_A_LENGTH != 0
-static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
 #endif
 
 #if L1_DATA_B_LENGTH != 0
-static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
 #endif
 
 #if L1_CODE_LENGTH != 0
-static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
 #endif
 
+static struct kmem_cache *sram_piece_cache;
+
 /* L1 Scratchpad SRAM initialization function */
-void __init l1sram_init(void)
+static void __init l1sram_init(void)
 {
-	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
-	       L1_SCRATCH_LENGTH >> 10);
+	free_l1_ssram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_ssram_head.next) {
+		printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n");
+		return;
+	}
 
-	memset(&l1_ssram, 0x00, sizeof(l1_ssram));
-	l1_ssram[0].paddr = (void *)L1_SCRATCH_START;
-	l1_ssram[0].size = L1_SCRATCH_LENGTH;
-	l1_ssram[0].flag = SRAM_SLT_FREE;
+	free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
+	free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
+	free_l1_ssram_head.next->pid = 0;
+	free_l1_ssram_head.next->next = NULL;
+
+	used_l1_ssram_head.next = NULL;
 
 	/* mutex initialize */
 	spin_lock_init(&l1sram_lock);
+
+	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+	       L1_SCRATCH_LENGTH >> 10);
 }
 
-void __init l1_data_sram_init(void)
+static void __init l1_data_sram_init(void)
 {
 #if L1_DATA_A_LENGTH != 0
-	memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram));
-	l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START +
-					(_ebss_l1 - _sdata_l1);
-	l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
-	l1_data_A_sram[0].flag = SRAM_SLT_FREE;
+	free_l1_data_A_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_A_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize Data A SRAM.\n");
+		return;
+	}
+
+	free_l1_data_A_sram_head.next->paddr =
+		(void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->size =
+		L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->pid = 0;
+	free_l1_data_A_sram_head.next->next = NULL;
+
+	used_l1_data_A_sram_head.next = NULL;
 
 	printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n",
-	       L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10);
+		L1_DATA_A_LENGTH >> 10,
+		free_l1_data_A_sram_head.next->size >> 10);
 #endif
 #if L1_DATA_B_LENGTH != 0
-	memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram));
-	l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START +
-				(_ebss_b_l1 - _sdata_b_l1);
-	l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
-	l1_data_B_sram[0].flag = SRAM_SLT_FREE;
+	free_l1_data_B_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_B_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize Data B SRAM.\n");
+		return;
+	}
+
+	free_l1_data_B_sram_head.next->paddr =
+		(void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->size =
+		L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->pid = 0;
+	free_l1_data_B_sram_head.next->next = NULL;
+
+	used_l1_data_B_sram_head.next = NULL;
 
 	printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n",
-	       L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10);
+		L1_DATA_B_LENGTH >> 10,
+		free_l1_data_B_sram_head.next->size >> 10);
 #endif
 
 	/* mutex initialize */
 	spin_lock_init(&l1_data_sram_lock);
 }
 
-void __init l1_inst_sram_init(void)
+static void __init l1_inst_sram_init(void)
 {
 #if L1_CODE_LENGTH != 0
-	memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
-	l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
-	l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
-	l1_inst_sram[0].flag = SRAM_SLT_FREE;
+	free_l1_inst_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_inst_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize Instruction SRAM.\n");
+		return;
+	}
+
+	free_l1_inst_sram_head.next->paddr =
+		(void *)L1_CODE_START + (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->size =
+		L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->pid = 0;
+	free_l1_inst_sram_head.next->next = NULL;
+
+	used_l1_inst_sram_head.next = NULL;
 
 	printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n",
-	       L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10);
+		L1_CODE_LENGTH >> 10,
+		free_l1_inst_sram_head.next->size >> 10);
 #endif
 
 	/* mutex initialize */
 	spin_lock_init(&l1_inst_sram_lock);
 }
 
+void __init bfin_sram_init(void)
+{
+	sram_piece_cache = kmem_cache_create("sram_piece_cache",
+				sizeof(struct sram_piece),
+				0, SLAB_PANIC, NULL);
+
+	l1sram_init();
+	l1_data_sram_init();
+	l1_inst_sram_init();
+}
+
 /* L1 memory allocate function */
-static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
+static void *_l1_sram_alloc(size_t size, struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
 {
-	int i, index = 0;
-	void *addr = NULL;
+	struct sram_piece *pslot, *plast, *pavail;
 
-	if (size <= 0)
+	if (size <= 0 || !pfree_head || !pused_head)
 		return NULL;
 
 	/* Align the size */
 	size = (size + 3) & ~3;
 
-	/* not use the good method to match the best slot !!! */
-	/* search an available memory slot */
-	for (i = 0; i < count; i++) {
-		if ((pfree[i].flag == SRAM_SLT_FREE)
-		    && (pfree[i].size >= size)) {
-			addr = pfree[i].paddr;
-			pfree[i].flag = SRAM_SLT_ALLOCATED;
-			pfree[i].pid = current->pid;
-			index = i;
-			break;
-		}
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && size > pslot->size) {
+		plast = pslot;
+		pslot = pslot->next;
 	}
-	if (i >= count)
+
+	if (!pslot)
 		return NULL;
 
-	/* updated the NULL memory slot !!! */
-	if (pfree[i].size > size) {
-		for (i = 0; i < count; i++) {
-			if (pfree[i].flag == SRAM_SLT_NULL) {
-				pfree[i].pid = 0;
-				pfree[i].flag = SRAM_SLT_FREE;
-				pfree[i].paddr = addr + size;
-				pfree[i].size = pfree[index].size - size;
-				pfree[index].size = size;
-				break;
-			}
-		}
+	if (pslot->size == size) {
+		plast->next = pslot->next;
+		pavail = pslot;
+	} else {
+		pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+
+		if (!pavail)
+			return NULL;
+
+		pavail->paddr = pslot->paddr;
+		pavail->size = size;
+		pslot->paddr += size;
+		pslot->size -= size;
 	}
 
-	return addr;
+	pavail->pid = current->pid;
+
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* insert new piece into used piece list !!! */
+	while (pslot != NULL && pavail->paddr < pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	pavail->next = pslot;
+	plast->next = pavail;
+
+	return pavail->paddr;
 }
 
 /* Allocate the largest available block.  */
-static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
+static void *_l1_sram_alloc_max(struct sram_piece *pfree_head,
+				struct sram_piece *pused_head,
 				unsigned long *psize)
 {
-	unsigned long best = 0;
-	int i, index = -1;
-	void *addr = NULL;
+	struct sram_piece *pslot, *pmax;
+
+	if (!pfree_head || !pused_head)
+		return NULL;
+
+	pmax = pslot = pfree_head->next;
 
-	/* search an available memory slot */
-	for (i = 0; i < count; i++) {
-		if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
-			addr = pfree[i].paddr;
-			index = i;
-			best = pfree[i].size;
-		}
+	/* search an available piece slot */
+	while (pslot != NULL) {
+		if (pslot->size > pmax->size)
+			pmax = pslot;
+		pslot = pslot->next;
 	}
-	if (index < 0)
+
+	if (!pmax)
 		return NULL;
-	*psize = best;
 
-	pfree[index].pid = current->pid;
-	pfree[index].flag = SRAM_SLT_ALLOCATED;
-	return addr;
+	*psize = pmax->size;
+
+	return _l1_sram_alloc(*psize, pfree_head, pused_head);
 }
 
 /* L1 memory free function */
 static int _l1_sram_free(const void *addr,
-			struct l1_sram_piece *pfree,
-			int count)
+			struct sram_piece *pfree_head,
+			struct sram_piece *pused_head)
 {
-	int i, index = 0;
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (!pfree_head || !pused_head)
+		return -1;
 
 	/* search the relevant memory slot */
-	for (i = 0; i < count; i++) {
-		if (pfree[i].paddr == addr) {
-			if (pfree[i].flag != SRAM_SLT_ALLOCATED) {
-				/* error log */
-				return -1;
-			}
-			index = i;
-			break;
-		}
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && pslot->paddr != addr) {
+		plast = pslot;
+		pslot = pslot->next;
 	}
-	if (i >= count)
+
+	if (!pslot)
 		return -1;
 
-	pfree[index].pid = 0;
-	pfree[index].flag = SRAM_SLT_FREE;
-
-	/* link the next address slot */
-	for (i = 0; i < count; i++) {
-		if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr)
-		    && (pfree[i].flag == SRAM_SLT_FREE)) {
-			pfree[i].pid = 0;
-			pfree[i].flag = SRAM_SLT_NULL;
-			pfree[index].size += pfree[i].size;
-			pfree[index].flag = SRAM_SLT_FREE;
-			break;
-		}
+	plast->next = pslot->next;
+	pavail = pslot;
+	pavail->pid = 0;
+
+	/* insert free pieces back to the free list */
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	while (pslot != NULL && addr > pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
+		plast->size += pavail->size;
+		kmem_cache_free(sram_piece_cache, pavail);
+	} else {
+		pavail->next = plast;
+		plast->next = pavail;
+		plast = pavail;
 	}
 
-	/* link the last address slot */
-	for (i = 0; i < count; i++) {
-		if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) &&
-		    (pfree[i].flag == SRAM_SLT_FREE)) {
-			pfree[index].flag = SRAM_SLT_NULL;
-			pfree[i].size += pfree[index].size;
-			break;
-		}
+	if (pslot && plast->paddr + plast->size == pslot->paddr) {
+		plast->size += pslot->size;
+		plast->next = pslot->next;
+		kmem_cache_free(sram_piece_cache, pslot);
 	}
 
 	return 0;
@@ -287,7 +348,8 @@ void *l1_data_A_sram_alloc(size_t size)
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	addr = _l1_sram_alloc(size, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
 #endif
 
 	/* add mutex operation */
@@ -309,8 +371,8 @@ int l1_data_A_sram_free(const void *addr)
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	ret = _l1_sram_free(addr,
-			   l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	ret = _l1_sram_free(addr, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
 #else
 	ret = -1;
 #endif
@@ -331,7 +393,8 @@ void *l1_data_B_sram_alloc(size_t size)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	addr = _l1_sram_alloc(size, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -355,7 +418,8 @@ int l1_data_B_sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	ret = _l1_sram_free(addr, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -408,7 +472,8 @@ void *l1_inst_sram_alloc(size_t size)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	addr = _l1_sram_alloc(size, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -432,7 +497,8 @@ int l1_inst_sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	ret = _l1_sram_free(addr, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -453,7 +519,8 @@ void *l1sram_alloc(size_t size)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram));
+	addr = _l1_sram_alloc(size, &free_l1_ssram_head,
+			&used_l1_ssram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -470,7 +537,8 @@ void *l1sram_alloc_max(size_t *psize)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize);
+	addr = _l1_sram_alloc_max(&free_l1_ssram_head,
+			&used_l1_ssram_head, psize);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -487,7 +555,8 @@ int l1sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram));
+	ret = _l1_sram_free(addr, &free_l1_ssram_head,
+			&used_l1_ssram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -553,28 +622,38 @@ EXPORT_SYMBOL(sram_alloc_with_lsl);
  * (including newline).
  */
 static int _l1sram_proc_read(char *buf, int *len, int count, const char *desc,
-		struct l1_sram_piece *pfree, const int array_size)
+		struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
 {
-	int i;
+	struct sram_piece *pslot;
+
+	if (!pfree_head || !pused_head)
+		return -1;
 
 	*len += sprintf(&buf[*len], "--- L1 %-14s Size   PID State     \n", desc);
-	for (i = 0; i < array_size && *len < count; ++i) {
-		const char *alloc_type;
-		switch (pfree[i].flag) {
-		case SRAM_SLT_NULL:      alloc_type = "NULL"; break;
-		case SRAM_SLT_FREE:      alloc_type = "FREE"; break;
-		case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break;
-		default:                 alloc_type = "????"; break;
-		}
-		/* if we've got a lot of space to cover, omit things */
-		if ((PAGE_SIZE - 1024) < (CONFIG_L1_MAX_PIECE + 1) * 4 * 44 &&
-		    pfree[i].size == 0)
-			continue;
+
+	/* search the relevant memory slot */
+	pslot = pused_head->next;
+
+	while (pslot != NULL) {
 		*len += sprintf(&buf[*len], "%p-%p %8i %5i %-10s\n",
-			pfree[i].paddr, pfree[i].paddr + pfree[i].size,
-			pfree[i].size, pfree[i].pid, alloc_type);
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "ALLOCATED");
+
+		pslot = pslot->next;
+	}
+
+	pslot = pfree_head->next;
+
+	while (pslot != NULL) {
+		*len += sprintf(&buf[*len], "%p-%p %8i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "FREE");
+
+		pslot = pslot->next;
 	}
-	return (i != array_size);
+
+	return 0;
 }
 static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
 		int *eof, void *data)
@@ -582,21 +661,23 @@ static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
 	int len = 0;
 
 	if (_l1sram_proc_read(buf, &len, count, "Scratchpad",
-			l1_ssram, ARRAY_SIZE(l1_ssram)))
+			&free_l1_ssram_head, &used_l1_ssram_head))
 		goto not_done;
 #if L1_DATA_A_LENGTH != 0
 	if (_l1sram_proc_read(buf, &len, count, "Data A",
-			l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)))
+			&free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head))
 		goto not_done;
 #endif
 #if L1_DATA_B_LENGTH != 0
 	if (_l1sram_proc_read(buf, &len, count, "Data B",
-			l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)))
+			&free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head))
 		goto not_done;
 #endif
 #if L1_CODE_LENGTH != 0
 	if (_l1sram_proc_read(buf, &len, count, "Instruction",
-			l1_inst_sram, ARRAY_SIZE(l1_inst_sram)))
+			&free_l1_inst_sram_head, &used_l1_inst_sram_head))
 		goto not_done;
 #endif
 
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
index 0fb73b78dd6..8cb0945563f 100644
--- a/arch/blackfin/mm/blackfin_sram.h
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -30,9 +30,7 @@
 #ifndef __BLACKFIN_SRAM_H__
 #define __BLACKFIN_SRAM_H__
 
-extern void l1sram_init(void);
-extern void l1_inst_sram_init(void);
-extern void l1_data_sram_init(void);
+extern void bfin_sram_init(void);
 extern void *l1sram_alloc(size_t);
 
 #endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index ec3141fefd2..4aab21f4409 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -164,11 +164,14 @@ void __init mem_init(void)
 		"(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n",
 		(unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10,
 		initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
+}
+
+static int __init sram_init(void)
+{
+	unsigned long tmp;
 
 	/* Initialize the blackfin L1 Memory. */
-	l1sram_init();
-	l1_data_sram_init();
-	l1_inst_sram_init();
+	bfin_sram_init();
 
 	/* Allocate this once; never free it.  We assume this gives us a
 	   pointer to the start of L1 scratchpad memory; panic if it
@@ -179,7 +182,10 @@ void __init mem_init(void)
 			tmp, (unsigned long)L1_SCRATCH_TASK_INFO);
 		panic("No L1, time to give up\n");
 	}
+
+	return 0;
 }
+pure_initcall(sram_init);
 
 static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
-- 
cgit v1.2.3


From bafcc1b97323261a42d47960db99947bcc1be133 Mon Sep 17 00:00:00 2001
From: Robin Getz <rgetz@blackfin.uclinux.org>
Date: Sat, 19 Jul 2008 15:11:15 +0800
Subject: Blackfin arch: Remove useless config option.

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/Kconfig | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8f21b78b2e6..5a08194e411 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -729,14 +729,6 @@ config BFIN_WT
 
 endchoice
 
-config L1_MAX_PIECE
-	int "Set the max L1 SRAM pieces"
-	default 16
-	help
-	  Set the max memory pieces for the L1 SRAM allocation algorithm.
-	  Min value is 16. Max value is 1024.
-
-
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
 	default n
-- 
cgit v1.2.3


From 262c3825a9f3eb0f4f30ebb4b1ee57397bcb3ffc Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Sat, 19 Jul 2008 15:42:41 +0800
Subject: Blackfin arch:  Extend sram malloc to handle L2 SRAM.

Extend system call to alloc L2 SRAM in application.
Automatically move following sections to L2 SRAM:
1. kernel built-in l2 attribute section
2. kernel module l2 attribute section
3. elf-fdpic application l2 attribute section

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/module.c      |  74 ++++++++++++----
 arch/blackfin/kernel/setup.c       |  10 +++
 arch/blackfin/kernel/vmlinux.lds.S |  40 +++++++--
 arch/blackfin/mm/blackfin_sram.c   | 170 ++++++++++++++++++++++++++++++-------
 include/asm-blackfin/bfin-global.h |   8 +-
 include/asm-blackfin/elf.h         |   2 +
 include/asm-blackfin/module.h      |   5 +-
 7 files changed, 253 insertions(+), 56 deletions(-)

diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 14a42848f37..e1bebc80a5b 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -173,7 +173,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 	for (s = sechdrs; s < sechdrs_end; ++s) {
 		if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_inst_sram_alloc(s->sh_size);
 			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
@@ -188,7 +188,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		}
 		if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
@@ -203,7 +203,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		}
 		if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
 		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
@@ -242,6 +242,51 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			s->sh_flags &= ~SHF_ALLOC;
 			s->sh_addr = (unsigned long)dest;
 		}
+		if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) ||
+		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.text_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+				       "module %s: L2 SRAM allocation failed\n",
+				       mod->name);
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
+		if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) ||
+		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.data_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+					"module %s: L2 SRAM allocation failed\n",
+					mod->name);
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
+		if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 ||
+		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.bss_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+					"module %s: L2 SRAM allocation failed\n",
+					mod->name);
+				return -1;
+			}
+			memset(dest, 0, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
 	}
 	return 0;
 }
@@ -411,9 +456,10 @@ module_finalize(const Elf_Ehdr * hdr,
 			continue;
 
 		if ((sechdrs[i].sh_type == SHT_RELA) &&
-		    ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
+		    ((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) ||
+		    (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
 		    ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
-			 (hdr->e_flags & FLG_CODE_IN_L1)))) {
+			(hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) {
 			apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
 					   symindex, i, mod);
 		}
@@ -423,14 +469,12 @@ module_finalize(const Elf_Ehdr * hdr,
 
 void module_arch_cleanup(struct module *mod)
 {
-	if (mod->arch.text_l1)
-		l1_inst_sram_free((void *)mod->arch.text_l1);
-	if (mod->arch.data_a_l1)
-		l1_data_sram_free((void *)mod->arch.data_a_l1);
-	if (mod->arch.bss_a_l1)
-		l1_data_sram_free((void *)mod->arch.bss_a_l1);
-	if (mod->arch.data_b_l1)
-		l1_data_B_sram_free((void *)mod->arch.data_b_l1);
-	if (mod->arch.bss_b_l1)
-		l1_data_B_sram_free((void *)mod->arch.bss_b_l1);
+	l1_inst_sram_free(mod->arch.text_l1);
+	l1_data_A_sram_free(mod->arch.data_a_l1);
+	l1_data_A_sram_free(mod->arch.bss_a_l1);
+	l1_data_B_sram_free(mod->arch.data_b_l1);
+	l1_data_B_sram_free(mod->arch.bss_b_l1);
+	l2_sram_free(mod->arch.text_l2);
+	l2_sram_free(mod->arch.data_l2);
+	l2_sram_free(mod->arch.bss_l2);
 }
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 861a1db74df..8671d1db1f9 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -104,6 +104,7 @@ void __init bf53x_relocate_l1_mem(void)
 	unsigned long l1_code_length;
 	unsigned long l1_data_a_length;
 	unsigned long l1_data_b_length;
+	unsigned long l2_length;
 
 	l1_code_length = _etext_l1 - _stext_l1;
 	if (l1_code_length > L1_CODE_LENGTH)
@@ -129,6 +130,15 @@ void __init bf53x_relocate_l1_mem(void)
 	/* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
 	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
+
+#ifdef L2_LENGTH
+	l2_length = _ebss_l2 - _stext_l2;
+	if (l2_length > L2_LENGTH)
+		panic("L2 SRAM Overflow\n");
+
+	/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
+	dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+#endif
 }
 
 /* add_memory_region to memmap */
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 3ecc64cab3b..0896e38d610 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -101,6 +101,11 @@ SECTIONS
 #if !L1_DATA_B_LENGTH
 		*(.l1.data.B)
 #endif
+#ifndef L2_LENGTH
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+		*(.l2.data)
+#endif
 
 		DATA_DATA
 		*(.data.*)
@@ -182,13 +187,12 @@ SECTIONS
 		*(.l1.data)
 		__edata_l1 = .;
 
-		. = ALIGN(4);
-		__sbss_l1 = .;
-		*(.l1.bss)
-
 		. = ALIGN(32);
 		*(.data_l1.cacheline_aligned)
 
+		. = ALIGN(4);
+		__sbss_l1 = .;
+		*(.l1.bss)
 		. = ALIGN(4);
 		__ebss_l1 = .;
 	}
@@ -203,11 +207,37 @@ SECTIONS
 		. = ALIGN(4);
 		__sbss_b_l1 = .;
 		*(.l1.bss.B)
-
 		. = ALIGN(4);
 		__ebss_b_l1 = .;
 	}
 
+#ifdef L2_LENGTH
+	__l2_lma_start = .;
+
+	.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
+	{
+		. = ALIGN(4);
+		__stext_l2 = .;
+		*(.l1.text)
+		. = ALIGN(4);
+		__etext_l2 = .;
+
+		. = ALIGN(4);
+		__sdata_l2 = .;
+		*(.l1.data)
+		__edata_l2 = .;
+
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+
+		. = ALIGN(4);
+		__sbss_l2 = .;
+		*(.l1.bss)
+		. = ALIGN(4);
+		__ebss_l2 = .;
+	}
+#endif
+
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
 	 */
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index b58cf196d7c..5af3c31c936 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -42,6 +42,7 @@
 #include "blackfin_sram.h"
 
 static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
+static spinlock_t l2_sram_lock;
 
 /* the data structure for L1 scratchpad and DATA SRAM */
 struct sram_piece {
@@ -65,6 +66,10 @@ static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
 static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
 #endif
 
+#ifdef L2_LENGTH
+static struct sram_piece free_l2_sram_head, used_l2_sram_head;
+#endif
+
 static struct kmem_cache *sram_piece_cache;
 
 /* L1 Scratchpad SRAM initialization function */
@@ -97,7 +102,7 @@ static void __init l1_data_sram_init(void)
 	free_l1_data_A_sram_head.next =
 		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
 	if (!free_l1_data_A_sram_head.next) {
-		printk(KERN_INFO"Fail to initialize Data A SRAM.\n");
+		printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n");
 		return;
 	}
 
@@ -110,7 +115,7 @@ static void __init l1_data_sram_init(void)
 
 	used_l1_data_A_sram_head.next = NULL;
 
-	printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n",
+	printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
 		L1_DATA_A_LENGTH >> 10,
 		free_l1_data_A_sram_head.next->size >> 10);
 #endif
@@ -118,7 +123,7 @@ static void __init l1_data_sram_init(void)
 	free_l1_data_B_sram_head.next =
 		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
 	if (!free_l1_data_B_sram_head.next) {
-		printk(KERN_INFO"Fail to initialize Data B SRAM.\n");
+		printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n");
 		return;
 	}
 
@@ -131,7 +136,7 @@ static void __init l1_data_sram_init(void)
 
 	used_l1_data_B_sram_head.next = NULL;
 
-	printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n",
+	printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
 		L1_DATA_B_LENGTH >> 10,
 		free_l1_data_B_sram_head.next->size >> 10);
 #endif
@@ -146,7 +151,7 @@ static void __init l1_inst_sram_init(void)
 	free_l1_inst_sram_head.next =
 		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
 	if (!free_l1_inst_sram_head.next) {
-		printk(KERN_INFO"Fail to initialize Instruction SRAM.\n");
+		printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n");
 		return;
 	}
 
@@ -159,7 +164,7 @@ static void __init l1_inst_sram_init(void)
 
 	used_l1_inst_sram_head.next = NULL;
 
-	printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n",
+	printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
 		L1_CODE_LENGTH >> 10,
 		free_l1_inst_sram_head.next->size >> 10);
 #endif
@@ -168,6 +173,33 @@ static void __init l1_inst_sram_init(void)
 	spin_lock_init(&l1_inst_sram_lock);
 }
 
+static void __init l2_sram_init(void)
+{
+#ifdef L2_LENGTH
+	free_l2_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l2_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L2 SRAM.\n");
+		return;
+	}
+
+	free_l2_sram_head.next->paddr = (void *)L2_START +
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->size = L2_LENGTH -
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->pid = 0;
+	free_l2_sram_head.next->next = NULL;
+
+	used_l2_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
+		L2_LENGTH >> 10,
+		free_l2_sram_head.next->size >> 10);
+#endif
+
+	/* mutex initialize */
+	spin_lock_init(&l2_sram_lock);
+}
 void __init bfin_sram_init(void)
 {
 	sram_piece_cache = kmem_cache_create("sram_piece_cache",
@@ -177,10 +209,11 @@ void __init bfin_sram_init(void)
 	l1sram_init();
 	l1_data_sram_init();
 	l1_inst_sram_init();
+	l2_sram_init();
 }
 
-/* L1 memory allocate function */
-static void *_l1_sram_alloc(size_t size, struct sram_piece *pfree_head,
+/* SRAM allocate function */
+static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
 		struct sram_piece *pused_head)
 {
 	struct sram_piece *pslot, *plast, *pavail;
@@ -236,7 +269,7 @@ static void *_l1_sram_alloc(size_t size, struct sram_piece *pfree_head,
 }
 
 /* Allocate the largest available block.  */
-static void *_l1_sram_alloc_max(struct sram_piece *pfree_head,
+static void *_sram_alloc_max(struct sram_piece *pfree_head,
 				struct sram_piece *pused_head,
 				unsigned long *psize)
 {
@@ -259,11 +292,11 @@ static void *_l1_sram_alloc_max(struct sram_piece *pfree_head,
 
 	*psize = pmax->size;
 
-	return _l1_sram_alloc(*psize, pfree_head, pused_head);
+	return _sram_alloc(*psize, pfree_head, pused_head);
 }
 
-/* L1 memory free function */
-static int _l1_sram_free(const void *addr,
+/* SRAM free function */
+static int _sram_free(const void *addr,
 			struct sram_piece *pfree_head,
 			struct sram_piece *pused_head)
 {
@@ -333,6 +366,11 @@ int sram_free(const void *addr)
 	else if (addr >= (void *)L1_DATA_B_START
 		 && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
 		return l1_data_B_sram_free(addr);
+#endif
+#ifdef L2_LENGTH
+	else if (addr >= (void *)L2_START
+		 && addr < (void *)(L2_START + L2_LENGTH))
+		return l2_sram_free(addr);
 #endif
 	else
 		return -1;
@@ -348,7 +386,7 @@ void *l1_data_A_sram_alloc(size_t size)
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	addr = _l1_sram_alloc(size, &free_l1_data_A_sram_head,
+	addr = _sram_alloc(size, &free_l1_data_A_sram_head,
 			&used_l1_data_A_sram_head);
 #endif
 
@@ -371,7 +409,7 @@ int l1_data_A_sram_free(const void *addr)
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	ret = _l1_sram_free(addr, &free_l1_data_A_sram_head,
+	ret = _sram_free(addr, &free_l1_data_A_sram_head,
 			&used_l1_data_A_sram_head);
 #else
 	ret = -1;
@@ -393,7 +431,7 @@ void *l1_data_B_sram_alloc(size_t size)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, &free_l1_data_B_sram_head,
+	addr = _sram_alloc(size, &free_l1_data_B_sram_head,
 			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
@@ -418,7 +456,7 @@ int l1_data_B_sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, &free_l1_data_B_sram_head,
+	ret = _sram_free(addr, &free_l1_data_B_sram_head,
 			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
@@ -472,7 +510,7 @@ void *l1_inst_sram_alloc(size_t size)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, &free_l1_inst_sram_head,
+	addr = _sram_alloc(size, &free_l1_inst_sram_head,
 			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
@@ -497,7 +535,7 @@ int l1_inst_sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, &free_l1_inst_sram_head,
+	ret = _sram_free(addr, &free_l1_inst_sram_head,
 			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
@@ -519,7 +557,7 @@ void *l1sram_alloc(size_t size)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, &free_l1_ssram_head,
+	addr = _sram_alloc(size, &free_l1_ssram_head,
 			&used_l1_ssram_head);
 
 	/* add mutex operation */
@@ -537,7 +575,7 @@ void *l1sram_alloc_max(size_t *psize)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc_max(&free_l1_ssram_head,
+	addr = _sram_alloc_max(&free_l1_ssram_head,
 			&used_l1_ssram_head, psize);
 
 	/* add mutex operation */
@@ -555,7 +593,7 @@ int l1sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	ret = _l1_sram_free(addr, &free_l1_ssram_head,
+	ret = _sram_free(addr, &free_l1_ssram_head,
 			&used_l1_ssram_head);
 
 	/* add mutex operation */
@@ -564,6 +602,64 @@ int l1sram_free(const void *addr)
 	return ret;
 }
 
+void *l2_sram_alloc(size_t size)
+{
+#ifdef L2_LENGTH
+	unsigned flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	addr = _sram_alloc(size, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_alloc);
+
+void *l2_sram_zalloc(size_t size)
+{
+	void *addr = l2_sram_alloc(size);
+
+	if (addr)
+		memset(addr, 0x00, size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l2_sram_zalloc);
+
+int l2_sram_free(const void *addr)
+{
+#ifdef L2_LENGTH
+	unsigned flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	ret = _sram_free(addr, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_free);
+
 int sram_free_with_lsl(const void *addr)
 {
 	struct sram_list_struct *lsl, **tmp;
@@ -602,6 +698,9 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags)
 	if (addr == NULL && (flags & L1_DATA_B_SRAM))
 		addr = l1_data_B_sram_alloc(size);
 
+	if (addr == NULL && (flags & L2_SRAM))
+		addr = l2_sram_alloc(size);
+
 	if (addr == NULL) {
 		kfree(lsl);
 		return NULL;
@@ -621,7 +720,7 @@ EXPORT_SYMBOL(sram_alloc_with_lsl);
 /* Need to keep line of output the same.  Currently, that is 44 bytes
  * (including newline).
  */
-static int _l1sram_proc_read(char *buf, int *len, int count, const char *desc,
+static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
 		struct sram_piece *pfree_head,
 		struct sram_piece *pused_head)
 {
@@ -630,13 +729,13 @@ static int _l1sram_proc_read(char *buf, int *len, int count, const char *desc,
 	if (!pfree_head || !pused_head)
 		return -1;
 
-	*len += sprintf(&buf[*len], "--- L1 %-14s Size   PID State     \n", desc);
+	*len += sprintf(&buf[*len], "--- SRAM %-14s Size   PID State     \n", desc);
 
 	/* search the relevant memory slot */
 	pslot = pused_head->next;
 
 	while (pslot != NULL) {
-		*len += sprintf(&buf[*len], "%p-%p %8i %5i %-10s\n",
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
 			pslot->paddr, pslot->paddr + pslot->size,
 			pslot->size, pslot->pid, "ALLOCATED");
 
@@ -646,7 +745,7 @@ static int _l1sram_proc_read(char *buf, int *len, int count, const char *desc,
 	pslot = pfree_head->next;
 
 	while (pslot != NULL) {
-		*len += sprintf(&buf[*len], "%p-%p %8i %5i %-10s\n",
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
 			pslot->paddr, pslot->paddr + pslot->size,
 			pslot->size, pslot->pid, "FREE");
 
@@ -655,38 +754,43 @@ static int _l1sram_proc_read(char *buf, int *len, int count, const char *desc,
 
 	return 0;
 }
-static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
+static int sram_proc_read(char *buf, char **start, off_t offset, int count,
 		int *eof, void *data)
 {
 	int len = 0;
 
-	if (_l1sram_proc_read(buf, &len, count, "Scratchpad",
+	if (_sram_proc_read(buf, &len, count, "Scratchpad",
 			&free_l1_ssram_head, &used_l1_ssram_head))
 		goto not_done;
 #if L1_DATA_A_LENGTH != 0
-	if (_l1sram_proc_read(buf, &len, count, "Data A",
+	if (_sram_proc_read(buf, &len, count, "L1 Data A",
 			&free_l1_data_A_sram_head,
 			&used_l1_data_A_sram_head))
 		goto not_done;
 #endif
 #if L1_DATA_B_LENGTH != 0
-	if (_l1sram_proc_read(buf, &len, count, "Data B",
+	if (_sram_proc_read(buf, &len, count, "L1 Data B",
 			&free_l1_data_B_sram_head,
 			&used_l1_data_B_sram_head))
 		goto not_done;
 #endif
 #if L1_CODE_LENGTH != 0
-	if (_l1sram_proc_read(buf, &len, count, "Instruction",
+	if (_sram_proc_read(buf, &len, count, "L1 Instruction",
 			&free_l1_inst_sram_head, &used_l1_inst_sram_head))
 		goto not_done;
 #endif
+#ifdef L2_LENGTH
+	if (_sram_proc_read(buf, &len, count, "L2",
+			&free_l2_sram_head, &used_l2_sram_head))
+		goto not_done;
+#endif
 
 	*eof = 1;
  not_done:
 	return len;
 }
 
-static int __init l1sram_proc_init(void)
+static int __init sram_proc_init(void)
 {
 	struct proc_dir_entry *ptr;
 	ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
@@ -695,8 +799,8 @@ static int __init l1sram_proc_init(void)
 		return -1;
 	}
 	ptr->owner = THIS_MODULE;
-	ptr->read_proc = l1sram_proc_read;
+	ptr->read_proc = sram_proc_read;
 	return 0;
 }
-late_initcall(l1sram_proc_init);
+late_initcall(sram_proc_init);
 #endif
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index 76033831eb3..320aa5e167e 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -92,16 +92,20 @@ extern void *l1_data_B_sram_alloc(size_t);
 extern void *l1_inst_sram_alloc(size_t);
 extern void *l1_data_sram_alloc(size_t);
 extern void *l1_data_sram_zalloc(size_t);
+extern void *l2_sram_alloc(size_t);
+extern void *l2_sram_zalloc(size_t);
 extern int l1_data_A_sram_free(const void*);
 extern int l1_data_B_sram_free(const void*);
 extern int l1_inst_sram_free(const void*);
 extern int l1_data_sram_free(const void*);
+extern int l2_sram_free(const void *);
 extern int sram_free(const void*);
 
 #define L1_INST_SRAM		0x00000001
 #define L1_DATA_A_SRAM		0x00000002
 #define L1_DATA_B_SRAM		0x00000004
 #define L1_DATA_SRAM		0x00000006
+#define L2_SRAM			0x00000008
 extern void *sram_alloc_with_lsl(size_t, unsigned long);
 extern int sram_free_with_lsl(const void*);
 
@@ -114,7 +118,9 @@ extern struct file_operations dpmc_fops;
 extern unsigned long _ramstart, _ramend, _rambase;
 extern unsigned long memory_start, memory_end, physical_mem_end;
 extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
-    _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[];
+	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[],
+	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
+	_ebss_l2[], _l2_lma_start[];
 
 #ifdef CONFIG_MTD_UCLINUX
 extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
diff --git a/include/asm-blackfin/elf.h b/include/asm-blackfin/elf.h
index 30303fc8292..67a03a8a353 100644
--- a/include/asm-blackfin/elf.h
+++ b/include/asm-blackfin/elf.h
@@ -15,6 +15,8 @@
 #define EF_BFIN_FDPIC		0x00000002	/* -mfdpic */
 #define EF_BFIN_CODE_IN_L1	0x00000010	/* --code-in-l1 */
 #define EF_BFIN_DATA_IN_L1	0x00000020	/* --data-in-l1 */
+#define EF_BFIN_CODE_IN_L2	0x00000040	/* --code-in-l2 */
+#define EF_BFIN_DATA_IN_L2	0x00000080	/* --data-in-l2 */
 
 typedef unsigned long elf_greg_t;
 
diff --git a/include/asm-blackfin/module.h b/include/asm-blackfin/module.h
index 3c7ce164428..e3128df139d 100644
--- a/include/asm-blackfin/module.h
+++ b/include/asm-blackfin/module.h
@@ -6,8 +6,6 @@
 #define Elf_Shdr        Elf32_Shdr
 #define Elf_Sym         Elf32_Sym
 #define Elf_Ehdr        Elf32_Ehdr
-#define FLG_CODE_IN_L1	0x10
-#define FLG_DATA_IN_L1	0x20
 
 struct mod_arch_specific {
 	Elf_Shdr	*text_l1;
@@ -15,5 +13,8 @@ struct mod_arch_specific {
 	Elf_Shdr	*bss_a_l1;
 	Elf_Shdr	*data_b_l1;
 	Elf_Shdr	*bss_b_l1;
+	Elf_Shdr	*text_l2;
+	Elf_Shdr	*data_l2;
+	Elf_Shdr	*bss_l2;
 };
 #endif				/* _ASM_BFIN_MODULE_H */
-- 
cgit v1.2.3


From e338125b8a886923ba8367207c144764dc352584 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Sat, 19 Jul 2008 09:33:21 +0200
Subject: nohz: adjust tick_nohz_stop_sched_tick() call of s390 as well

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/s390/kernel/process.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 85defd01d29..9839767d084 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -142,7 +142,7 @@ static void default_idle(void)
 void cpu_idle(void)
 {
 	for (;;) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			default_idle();
 		tick_nohz_restart_sched_tick();
-- 
cgit v1.2.3


From aa3348f461da1df5c583f9916ab80298ddd68eff Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Sat, 19 Jul 2008 15:54:10 +0800
Subject: Blackfin arch: Add return value check in bfin_sir_probe(), remove
 SSYNC().

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 include/asm-blackfin/mach-bf527/bfin_sir.h | 21 ++++++++++++-----
 include/asm-blackfin/mach-bf533/bfin_sir.h | 13 +++++++----
 include/asm-blackfin/mach-bf537/bfin_sir.h | 21 ++++++++++++-----
 include/asm-blackfin/mach-bf548/bfin_sir.h | 37 ++++++++++++++++++++++--------
 include/asm-blackfin/mach-bf561/bfin_sir.h | 13 +++++++----
 5 files changed, 75 insertions(+), 30 deletions(-)

diff --git a/include/asm-blackfin/mach-bf527/bfin_sir.h b/include/asm-blackfin/mach-bf527/bfin_sir.h
index 0612d0c9501..cfd8ad4f1f2 100644
--- a/include/asm-blackfin/mach-bf527/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf527/bfin_sir.h
@@ -118,16 +118,25 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR1
-	peripheral_request(P_UART1_TX, DRIVER_NAME);
-	peripheral_request(P_UART1_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/include/asm-blackfin/mach-bf533/bfin_sir.h
index cefcf8bb505..9bb87e9e2e9 100644
--- a/include/asm-blackfin/mach-bf533/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf533/bfin_sir.h
@@ -110,11 +110,16 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
diff --git a/include/asm-blackfin/mach-bf537/bfin_sir.h b/include/asm-blackfin/mach-bf537/bfin_sir.h
index 0612d0c9501..cfd8ad4f1f2 100644
--- a/include/asm-blackfin/mach-bf537/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf537/bfin_sir.h
@@ -118,16 +118,25 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR1
-	peripheral_request(P_UART1_TX, DRIVER_NAME);
-	peripheral_request(P_UART1_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
diff --git a/include/asm-blackfin/mach-bf548/bfin_sir.h b/include/asm-blackfin/mach-bf548/bfin_sir.h
index 5e94271c7e3..c41f9cf0026 100644
--- a/include/asm-blackfin/mach-bf548/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf548/bfin_sir.h
@@ -124,26 +124,43 @@ struct bfin_sir_self {
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR1
-	peripheral_request(P_UART1_TX, DRIVER_NAME);
-	peripheral_request(P_UART1_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR2
-	peripheral_request(P_UART2_TX, DRIVER_NAME);
-	peripheral_request(P_UART2_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART2_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART2_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR3
-	peripheral_request(P_UART3_TX, DRIVER_NAME);
-	peripheral_request(P_UART3_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART3_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART3_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
diff --git a/include/asm-blackfin/mach-bf561/bfin_sir.h b/include/asm-blackfin/mach-bf561/bfin_sir.h
index cefcf8bb505..9bb87e9e2e9 100644
--- a/include/asm-blackfin/mach-bf561/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf561/bfin_sir.h
@@ -110,11 +110,16 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
-- 
cgit v1.2.3


From cc2e16bd35f6d78f559467358259e7d7264d4e96 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Sat, 19 Jul 2008 16:43:51 +0800
Subject: Blackfin arch: add missing IORESOURCE_MEM flags to UART3

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-bf548/boards/ezkit.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index af7c211a580..547dd253a3f 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -177,6 +177,7 @@ static struct resource bfin_uart_resources[] = {
 	{
 		.start = 0xFFC03100,
 		.end = 0xFFC031FF,
+		.flags = IORESOURCE_MEM,
 	},
 #endif
 };
-- 
cgit v1.2.3


From 0138da6101fa3cdfea7f470d014c2f13cc03e7a9 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Sat, 19 Jul 2008 16:56:53 +0800
Subject: Blackfin arch: fix bug - detect 0.1 silicon revision BF527-EZKIT as
 0.0 version

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 include/asm-blackfin/processor.h | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h
index 1c004072461..6f3995b119d 100644
--- a/include/asm-blackfin/processor.h
+++ b/include/asm-blackfin/processor.h
@@ -112,7 +112,26 @@ unsigned long get_wchan(struct task_struct *p);
 static inline uint32_t __pure bfin_revid(void)
 {
 	/* stored in the upper 4 bits */
-	return bfin_read_CHIPID() >> 28;
+	uint32_t revid = bfin_read_CHIPID() >> 28;
+
+#ifdef CONFIG_BF52x
+	/* ANOMALY_05000357
+	 * Incorrect Revision Number in DSPID Register
+	 */
+	if (revid == 0)
+		switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
+		case 0x0010:
+			revid = 0;
+			break;
+		case 0x2796:
+			revid = 1;
+			break;
+		default:
+			revid = 0xFFFF;
+			break;
+		}
+#endif
+	return revid;
 }
 
 static inline uint32_t __pure bfin_compiled_revid(void)
-- 
cgit v1.2.3


From 0a6304a9517aa3593913ecfbbcad80e798641723 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Sat, 26 Jul 2008 16:14:57 +0800
Subject: Blackfin arch: Add ISP1760 board resources to BF548-EZKIT

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-bf548/boards/ezkit.c | 43 +++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 547dd253a3f..166fa2201ee 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -61,6 +61,49 @@ const char bfin_board_name[] = "ADSP-BF548-EZKIT";
  *  Driver needs to know address, irq and flag pin.
  */
 
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+	[0] = {
+		.name	= "isp1761-regs",
+		.start  = 0x2C0C0000,
+		.end    = 0x2C0C0000 + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PG7,
+		.end    = IRQ_PG7,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_isp1761_device = {
+	.name           = "isp1761",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+	.resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+	&bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	set_irq_type(bfin_isp1761_resources[1].start, IRQF_TRIGGER_FALLING);
+
+	return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+	platform_device_unregister(&bfin_isp1761_device);
+}
+arch_initcall(bfin_isp1761_init);
+#endif
+
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
 #include <asm/mach/bf54x-lq043.h>
-- 
cgit v1.2.3


From f09630bff51daaf427968c61c0f2370c64148e06 Mon Sep 17 00:00:00 2001
From: Robin Getz <rgetz@blackfin.uclinux.org>
Date: Sat, 26 Jul 2008 19:45:46 +0800
Subject: Blackfin arch: Add unwinding for stack info, and a little more detail
 on trace buffer

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/traps.c | 296 +++++++++++++++++++++++++++++++++++--------
 1 file changed, 241 insertions(+), 55 deletions(-)

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index f061f518162..ad922ab9154 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -69,8 +69,6 @@ void __init trap_init(void)
 
 unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
-int kstack_depth_to_print = 48;
-
 static void decode_address(char *buf, unsigned long address)
 {
 	struct vm_list_struct *vml;
@@ -163,6 +161,9 @@ static void decode_address(char *buf, unsigned long address)
 				if (!in_atomic)
 					mmput(mm);
 
+				if (!strlen(buf))
+					sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name);
+
 				goto done;
 			}
 
@@ -173,7 +174,7 @@ static void decode_address(char *buf, unsigned long address)
 	}
 
 	/* we were unable to find this address anywhere */
-	sprintf(buf, "<0x%p> /* unknown address */", (void *)address);
+	sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address);
 
 done:
 	write_unlock_irqrestore(&tasklist_lock, flags);
@@ -494,7 +495,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	BUG_ON(sig == 0);
 
 	if (sig != SIGTRAP) {
-		unsigned long stack;
+		unsigned long *stack;
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
@@ -508,14 +509,23 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		else
 #endif
 			dump_bfin_trace_buffer();
-		show_stack(current, &stack);
+
 		if (oops_in_progress) {
+			/* Dump the current kernel stack */
+			printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			show_stack(current, NULL);
+
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
 			printk(KERN_EMERG "Please turn on "
 			       "CONFIG_ACCESS_CHECK\n");
 #endif
 			panic("Kernel exception");
+		} else {
+			/* Dump the user space stack */
+			stack = (unsigned long *)rdusp();
+			printk(KERN_NOTICE "Userspace Stack\n");
+			show_stack(NULL, stack);
 		}
 	}
 
@@ -532,11 +542,71 @@ asmlinkage void trap_c(struct pt_regs *fp)
 
 #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
 
+/*
+ * Similar to get_user, do some address checking, then dereference
+ * Return true on sucess, false on bad address
+ */
+bool get_instruction(unsigned short *val, unsigned short *address)
+{
+
+	unsigned long addr;
+
+	addr = (unsigned long)address;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	/* Check that things do not wrap around */
+	if (addr > (addr + 2))
+		return false;
+
+	/*
+	 * Since we are in exception context, we need to do a little address checking
+	 * We need to make sure we are only accessing valid memory, and
+	 * we don't read something in the async space that can hang forever
+	 */
+	if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
+#ifdef L2_START
+	    (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
+#endif
+	    (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
+#if L1_DATA_A_LENGTH != 0
+	    (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
+#endif
+#if L1_DATA_B_LENGTH != 0
+	    (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
+#endif
+	    (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
+	    (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
+	       addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
+	       addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
+	       addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
+	      addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
+		*val = *address;
+		return true;
+	}
+
+#if L1_CODE_LENGTH != 0
+	if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
+		dma_memcpy(val, address, 2);
+		return true;
+	}
+#endif
+
+
+	return false;
+}
+
 void dump_bfin_trace_buffer(void)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int tflags, i = 0;
 	char buf[150];
+	unsigned short val = 0, *addr;
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
 	int j, index;
 #endif
@@ -549,8 +619,42 @@ void dump_bfin_trace_buffer(void)
 		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
 			decode_address(buf, (unsigned long)bfin_read_TBUF());
 			printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-			decode_address(buf, (unsigned long)bfin_read_TBUF());
-			printk(KERN_NOTICE "     Source : %s\n", buf);
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			printk(KERN_NOTICE "     Source : %s ", buf);
+			if (get_instruction(&val, addr)) {
+				if (val == 0x0010)
+					printk("RTS");
+				else if (val == 0x0011)
+					printk("RTI");
+				else if (val == 0x0012)
+					printk("RTX");
+				else if (val >= 0x0050 && val <= 0x0057)
+					printk("JUMP (P%i)", val & 7);
+				else if (val >= 0x0060 && val <= 0x0067)
+					printk("CALL (P%i)", val & 7);
+				else if (val >= 0x0070 && val <= 0x0077)
+					printk("CALL (PC+P%i)", val & 7);
+				else if (val >= 0x0080 && val <= 0x0087)
+					printk("JUMP (PC+P%i)", val & 7);
+				else if ((val >= 0x1000 && val <= 0x13FF) ||
+				    (val >= 0x1800 && val <= 0x1BFF))
+					printk("IF !CC JUMP");
+				else if ((val >= 0x1400 && val <= 0x17ff) ||
+				    (val >= 0x1c00 && val <= 0x1fff))
+					printk("IF CC JUMP");
+				else if (val >= 0x2000 && val <= 0x2fff)
+					printk("JUMP.S");
+				else if (val >= 0xe080 && val <= 0xe0ff)
+					printk("LSETUP");
+				else if (val >= 0xe200 && val <= 0xe2ff)
+					printk("JUMP.L");
+				else if (val >= 0xe300 && val <= 0xe3ff)
+					printk("CALL pcrel");
+				else
+					printk("0x%04x", val);
+			}
+			printk("\n");
 		}
 	}
 
@@ -582,59 +686,151 @@ void dump_bfin_trace_buffer(void)
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
-static void show_trace(struct task_struct *tsk, unsigned long *sp)
+/*
+ * Checks to see if the address pointed to is either a
+ * 16-bit CALL instruction, or a 32-bit CALL instruction
+ */
+bool is_bfin_call(unsigned short *addr)
 {
-	unsigned long addr;
+	unsigned short opcode = 0, *ins_addr;
+	ins_addr = (unsigned short *)addr;
 
-	printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n");
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		/*
-		 * If the address is either in the text segment of the
-		 * kernel, or in the region which contains vmalloc'ed
-		 * memory, it *may* be the address of a calling
-		 * routine; if so, print it so that someone tracing
-		 * down the cause of the crash will be able to figure
-		 * out the call path that was taken.
-		 */
-		if (kernel_text_address(addr))
-			print_ip_sym(addr);
-	}
+	if (!get_instruction(&opcode, ins_addr))
+		return false;
 
-	printk(KERN_NOTICE "\n");
-}
+	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
+	    (opcode >= 0x0070 && opcode <= 0x0077))
+		return true;
+
+	ins_addr--;
+	if (!get_instruction(&opcode, ins_addr))
+		return false;
 
+	if (opcode >= 0xE300 && opcode <= 0xE3FF)
+		return true;
+
+	return false;
+
+}
 void show_stack(struct task_struct *task, unsigned long *stack)
 {
-	unsigned long *endstack, addr;
-	int i;
+	unsigned int *addr, *endstack, *fp = 0, *frame;
+	unsigned short *ins_addr;
+	char buf[150];
+	unsigned int i, j, ret_addr, frame_no = 0;
 
-	/* Cannot call dump_bfin_trace_buffer() here as show_stack() is
-	 * called externally in some places in the kernel.
+	/*
+	 * If we have been passed a specific stack, use that one otherwise
+	 *    if we have been passed a task structure, use that, otherwise
+	 *    use the stack of where the variable "stack" exists
 	 */
 
-	if (!stack) {
-		if (task)
+	if (stack == NULL) {
+		if (task) {
+			/* We know this is a kernel stack, so this is the start/end */
 			stack = (unsigned long *)task->thread.ksp;
-		else
+			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
+		} else {
+			/* print out the existing stack info */
 			stack = (unsigned long *)&stack;
+			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+		}
+	} else
+		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+
+	decode_address(buf, (unsigned int)stack);
+	printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+	addr = (unsigned int *)((unsigned int)stack & ~0x3F);
+
+	/* First thing is to look for a frame pointer */
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		addr < endstack; addr++, i++) {
+		if (*addr & 0x1)
+			continue;
+		ins_addr = (unsigned short *)*addr;
+		ins_addr--;
+		if (is_bfin_call(ins_addr))
+			fp = addr - 1;
+
+		if (fp) {
+			/* Let's check to see if it is a frame pointer */
+			while (fp >= (addr - 1) && fp < endstack && fp)
+				fp = (unsigned int *)*fp;
+			if (fp == 0 || fp == endstack) {
+				fp = addr - 1;
+				break;
+			}
+			fp = 0;
+		}
 	}
+	if (fp) {
+		frame = fp;
+		printk(" FP: (0x%p)\n", fp);
+	} else
+		frame = 0;
 
-	addr = (unsigned long)stack;
-	endstack = (unsigned long *)PAGE_ALIGN(addr);
+	/*
+	 * Now that we think we know where things are, we
+	 * walk the stack again, this time printing things out
+	 * incase there is no frame pointer, we still look for
+	 * valid return addresses
+	 */
 
-	printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack);
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (stack + 1 > endstack)
-			break;
-		if (i % 8 == 0)
-			printk("\n" KERN_NOTICE "       ");
-		printk(" %08lx", *stack++);
+	/* First time print out data, next time, print out symbols */
+	for (j = 0; j <= 1; j++) {
+		if (j)
+			printk(KERN_NOTICE "Return addresses in stack:\n");
+		else
+			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
+
+		fp = frame;
+		frame_no = 0;
+
+		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		     addr <= endstack; addr++, i++) {
+
+			ret_addr = 0;
+			if (!j && i % 8 == 0)
+				printk("\n" KERN_NOTICE "%p:",addr);
+
+			/* if it is an odd address, or zero, just skip it */
+			if (*addr & 0x1 || !*addr)
+				goto print;
+
+			ins_addr = (unsigned short *)*addr;
+
+			/* Go back one instruction, and see if it is a CALL */
+			ins_addr--;
+			ret_addr = is_bfin_call(ins_addr);
+ print:
+			if (!j && stack == (unsigned long *)addr)
+				printk("[%08x]", *addr);
+			else if (ret_addr)
+				if (j) {
+					decode_address(buf, (unsigned int)*addr);
+					if (frame == addr) {
+						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
+						continue;
+					}
+					printk(KERN_NOTICE "    address : %s\n", buf);
+				} else
+					printk("<%08x>", *addr);
+			else if (fp == addr) {
+				if (j)
+					frame = addr+1;
+				else
+					printk("(%08x)", *addr);
+
+				fp = (unsigned int *)*addr;
+				frame_no++;
+
+			} else if (!j)
+				printk(" %08x ", *addr);
+		}
+		if (!j)
+			printk("\n");
 	}
-	printk("\n");
 
-	show_trace(task, stack);
 }
 
 void dump_stack(void)
@@ -715,19 +911,9 @@ void dump_bfin_mem(struct pt_regs *fp)
 		if (!((unsigned long)addr & 0xF))
 			printk("\n" KERN_NOTICE "0x%p: ", addr);
 
-		if (get_user(val, addr)) {
-			if (addr >= (unsigned short *)L1_CODE_START &&
-			    addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) {
-				dma_memcpy(&val, addr, sizeof(val));
-				sprintf(buf, "%04x", val);
-			} else if (addr >= (unsigned short *)FIXED_CODE_START &&
-				addr <= (unsigned short *)memory_start) {
-				val = bfin_read16(addr);
-				sprintf(buf, "%04x", val);
-			} else {
+		if (get_instruction(&val, addr)) {
 				val = 0;
 				sprintf(buf, "????");
-			}
 		} else
 			sprintf(buf, "%04x", val);
 
-- 
cgit v1.2.3


From 9db144fe897bb09838294aab2229cb423ab40988 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Sat, 19 Jul 2008 17:16:07 +0800
Subject: Blackfin arch: Apply Bluetechnix CM-BF527 board support patch

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/Kconfig                      |    5 +-
 arch/blackfin/configs/CM-BF527_defconfig   | 1185 ++++++++++++++++++++++++++++
 arch/blackfin/mach-bf527/boards/Kconfig    |    5 +
 arch/blackfin/mach-bf527/boards/Makefile   |    1 +
 arch/blackfin/mach-bf527/boards/cm_bf527.c | 1011 ++++++++++++++++++++++++
 5 files changed, 2204 insertions(+), 3 deletions(-)
 create mode 100644 arch/blackfin/configs/CM-BF527_defconfig
 create mode 100644 arch/blackfin/mach-bf527/boards/cm_bf527.c

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 5a08194e411..efa77f3a30d 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -234,7 +234,7 @@ config MEM_MT48LC16M16A2TG_75
 	bool
 	depends on (BFIN533_EZKIT || BFIN561_EZKIT \
 		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
-		|| H8606_HVSISTEMAS)
+		|| H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -330,8 +330,7 @@ config VCO_MULT
 	default "45" if BFIN533_STAMP
 	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
 	default "22" if BFIN533_BLUETECHNIX_CM
-	default "20" if BFIN537_BLUETECHNIX_CM
-	default "20" if BFIN561_BLUETECHNIX_CM
+	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
 	default "16" if H8606_HVSISTEMAS
 	help
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
new file mode 100644
index 00000000000..0799aa9bba9
--- /dev/null
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -0,0 +1,1185 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Fri Jul 18 18:00:41 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+CONFIG_BF527=y
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF52x=y
+CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_BFIN527_EZKIT is not set
+CONFIG_BFIN527_BLUETECHNIX_CM=y
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI_ERROR=7
+CONFIG_IRQ_NFC_ERROR=7
+CONFIG_IRQ_HDMA_ERROR=7
+CONFIG_IRQ_HDMA=7
+CONFIG_IRQ_USB_EINT=10
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC0
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_BFIN_SLEEP_DEEPER is not set
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_BLACKFIN_TWI=m
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CPLB_INFO is not set
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
index 6a570ad0374..8bf9e58f014 100644
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -9,4 +9,9 @@ config BFIN527_EZKIT
 	help
 	  BF527-EZKIT-LITE board support.
 
+config BFIN527_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF527"
+	help
+	  CM-BF527 support for EVAL- and DEV-Board.
+
 endchoice
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index 7277d35ef11..7ba7d256bbb 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
new file mode 100644
index 00000000000..0b26ae2de5e
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -0,0 +1,1011 @@
+/*
+ * File:         arch/blackfin/mach-bf527/boards/cm-bf527.c
+ * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/etherdevice.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/pata_platform.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/sl811.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#include <linux/usb/musb.h>
+#endif
+#include <asm/cplb.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM-BF527";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#define ISP1761_BASE       0x203C0000
+#define ISP1761_IRQ        IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+	[0] = {
+		.name	= "isp1761-regs",
+		.start  = ISP1761_BASE + 0x00000000,
+		.end    = ISP1761_BASE + 0x000fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = ISP1761_IRQ,
+		.end    = ISP1761_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_isp1761_device = {
+	.name           = "isp1761",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+	.resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+	&bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+	return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+	platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.multipoint	= 0,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb_hdrc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "Bootloader",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "Kernel",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "RootFS",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "Linux Kernel",
+		.offset = 0,
+		.size = 4 * SIZE_1M,
+	},
+	{
+		.name = "File System",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.page_size = NFC_PG_SIZE_256,
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+	{
+		.start = 0x20310000, /* IO PORT */
+		.end = 0x20312000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20311000, /* Attribute Memory */
+		.end = 0x20311FFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	}, {
+		.start = 6, /* Card Detect PF6 */
+		.end = 6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+	.name = "bfin_cf_pcmcia",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+	.resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= 0x203FB800,
+		.end	= 0x203FB800 + 8,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PF9,
+		.end	= IRQ_PF9,
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+	{
+		.start = 0x20340000,
+		.end = 0x20340000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20340004,
+		.end = 0x20340004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = CONFIG_USB_SL811_BFIN_IRQ,
+		.end = CONFIG_USB_SL811_BFIN_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+	.potpg = 10,
+	.power = 250,       /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+	.port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+	.name = "sl811-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &sl811_priv,
+	},
+	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
+	.resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20360000,
+		.end = 0x20360000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20360004,
+		.end = 0x20360004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+	.ctl_reg	= 0x4, /* send zero */
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+	.cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836-spi",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+	{
+		.modalias = "ad9960-spi",
+		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &ad9960_spi_chip_info,
+	},
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_PBX)
+	{
+		.modalias = "fxs-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J11_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "fxo-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J19_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.controller_data = &spi_wm8731_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+	.name = "bfin-adv7393",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+		.type = "pcf8574_lcd",
+	},
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.type = "pcf8574_keypad",
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT	55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 1,
+	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x20314020,
+		.end = 0x2031403F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2031401C,
+		.end = 0x2031401F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+	&bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+	&bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+	&sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+	&musb_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+	&dm9000_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	&bfin_fb_adv7393_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	&bfin_pata_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezkit_flash_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init stamp_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+	return 0;
+}
+
+arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_gpio_reset_spi0_ssel1();
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
-- 
cgit v1.2.3


From 6bca67f951f80b9e61078f8cdf5fb7b3d9e51aa9 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 18 Jul 2008 18:11:27 -0700
Subject: NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c

  * nr_cpu_ids should be used to allocate arrays based on the number of
    cpu's present.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/mce_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index c4a7ec31394..2fe06ab5c54 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -580,7 +580,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 	char __user *buf = ubuf;
 	int i, err;
 
-	cpu_tsc = kmalloc(NR_CPUS * sizeof(long), GFP_KERNEL);
+	cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
 	if (!cpu_tsc)
 		return -ENOMEM;
 
-- 
cgit v1.2.3


From f2ad47ffeb1d292b7c7d1e2f6aedb37646c391db Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 18 Jul 2008 18:11:28 -0700
Subject: NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c

  * Use nr_cpu_ids instead of NR_CPUS to limit traversal of cpu online map.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/proc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 0d0d9057e7c..a26c480b949 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -160,7 +160,7 @@ static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
 		*pos = first_cpu(cpu_online_map);
-	if ((*pos) < NR_CPUS && cpu_online(*pos))
+	if ((*pos) < nr_cpu_ids && cpu_online(*pos))
 		return &cpu_data(*pos);
 	return NULL;
 }
-- 
cgit v1.2.3


From 247bc6ca0f691e4617e7bdb70cbaccc939f754ec Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 18 Jul 2008 18:11:29 -0700
Subject: NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c

  * Replace NR_CPUS loop with for_each_possible_cpu().

  * nr_cpu_ids should be used to determine if a percpu area is
    available for a given cpu.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/genx2apic_uv_x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 711f11c30b0..3e5d7b8698f 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -94,7 +94,7 @@ static void uv_send_IPI_mask(cpumask_t mask, int vector)
 {
 	unsigned int cpu;
 
-	for (cpu = 0; cpu < NR_CPUS; ++cpu)
+	for_each_possible_cpu(cpu)
 		if (cpu_isset(cpu, mask))
 			uv_send_IPI_one(cpu, vector);
 }
@@ -128,7 +128,7 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
 	 * May as well be the first.
 	 */
 	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
+	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
-- 
cgit v1.2.3


From 1bd9d6b64e1474f1a03f8660e8721d746cffae57 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 18 Jul 2008 18:11:30 -0700
Subject: NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c

  * nr_cpu_ids should be used to determine if a percpu area is
    available for a given cpu.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/genapic_flat_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 1a9c68845ee..786548a62d3 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -168,7 +168,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
 	 * May as well be the first.
 	 */
 	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
+	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
-- 
cgit v1.2.3


From 94a1e869c7b96a9d30e260084866383a145fd8ae Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 18 Jul 2008 18:11:31 -0700
Subject: NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var

  * Slight optimization when getting one's own cpu_info percpu data.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/asm-x86/processor.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index 55402d2ab93..f92315ed68e 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -134,7 +134,7 @@ extern __u32			cleared_cpu_caps[NCAPINTS];
 #ifdef CONFIG_SMP
 DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
 #define cpu_data(cpu)		per_cpu(cpu_info, cpu)
-#define current_cpu_data	cpu_data(smp_processor_id())
+#define current_cpu_data	__get_cpu_var(cpu_info)
 #else
 #define cpu_data(cpu)		boot_cpu_data
 #define current_cpu_data	boot_cpu_data
-- 
cgit v1.2.3


From b38868aabeeb9c0c76a41ac5fa98c24bf0096f2a Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 18 Jul 2008 18:11:32 -0700
Subject: NR_CPUS: Replace NR_CPUS in cpufreq userspace routines

  * Replace arrays sized by NR_CPUS with percpu variables.

    Prior reference: http://marc.info/?l=linux-kernel&m=120251421825989&w=4
    Subject:    [PATCH 1/4] cpufreq: change cpu freq tables to per_cpu variables
    From:       Mike Travis <travis () sgi ! com>
    Date:       2008-02-08 23:37:39

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/cpufreq/cpufreq_userspace.c | 79 ++++++++++++++++++++-----------------
 1 file changed, 43 insertions(+), 36 deletions(-)

diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index cb2ac01a41a..32244aa7cc0 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -30,16 +30,18 @@
 /**
  * A few values needed by the userspace governor
  */
-static unsigned int	cpu_max_freq[NR_CPUS];
-static unsigned int	cpu_min_freq[NR_CPUS];
-static unsigned int	cpu_cur_freq[NR_CPUS]; /* current CPU freq */
-static unsigned int	cpu_set_freq[NR_CPUS]; /* CPU freq desired by userspace */
-static unsigned int	cpu_is_managed[NR_CPUS];
+static DEFINE_PER_CPU(unsigned int, cpu_max_freq);
+static DEFINE_PER_CPU(unsigned int, cpu_min_freq);
+static DEFINE_PER_CPU(unsigned int, cpu_cur_freq); /* current CPU freq */
+static DEFINE_PER_CPU(unsigned int, cpu_set_freq); /* CPU freq desired by
+							userspace */
+static DEFINE_PER_CPU(unsigned int, cpu_is_managed);
 
 static DEFINE_MUTEX	(userspace_mutex);
 static int cpus_using_userspace_governor;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
+#define dprintk(msg...) \
+	cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
 
 /* keep track of frequency transitions */
 static int
@@ -48,12 +50,12 @@ userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 {
         struct cpufreq_freqs *freq = data;
 
-	if (!cpu_is_managed[freq->cpu])
+	if (!per_cpu(cpu_is_managed, freq->cpu))
 		return 0;
 
 	dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n",
 			freq->cpu, freq->new);
-	cpu_cur_freq[freq->cpu] = freq->new;
+	per_cpu(cpu_cur_freq, freq->cpu) = freq->new;
 
         return 0;
 }
@@ -77,15 +79,15 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
 	dprintk("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
 
 	mutex_lock(&userspace_mutex);
-	if (!cpu_is_managed[policy->cpu])
+	if (!per_cpu(cpu_is_managed, policy->cpu))
 		goto err;
 
-	cpu_set_freq[policy->cpu] = freq;
+	per_cpu(cpu_set_freq, policy->cpu) = freq;
 
-	if (freq < cpu_min_freq[policy->cpu])
-		freq = cpu_min_freq[policy->cpu];
-	if (freq > cpu_max_freq[policy->cpu])
-		freq = cpu_max_freq[policy->cpu];
+	if (freq < per_cpu(cpu_min_freq, policy->cpu))
+		freq = per_cpu(cpu_min_freq, policy->cpu);
+	if (freq > per_cpu(cpu_max_freq, policy->cpu))
+		freq = per_cpu(cpu_max_freq, policy->cpu);
 
 	/*
 	 * We're safe from concurrent calls to ->target() here
@@ -104,7 +106,7 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
 
 static ssize_t show_speed(struct cpufreq_policy *policy, char *buf)
 {
-	return sprintf(buf, "%u\n", cpu_cur_freq[policy->cpu]);
+	return sprintf(buf, "%u\n", per_cpu(cpu_cur_freq, policy->cpu));
 }
 
 static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
@@ -127,12 +129,17 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 		}
 		cpus_using_userspace_governor++;
 
-		cpu_is_managed[cpu] = 1;
-		cpu_min_freq[cpu] = policy->min;
-		cpu_max_freq[cpu] = policy->max;
-		cpu_cur_freq[cpu] = policy->cur;
-		cpu_set_freq[cpu] = policy->cur;
-		dprintk("managing cpu %u started (%u - %u kHz, currently %u kHz)\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu]);
+		per_cpu(cpu_is_managed, cpu) = 1;
+		per_cpu(cpu_min_freq, cpu) = policy->min;
+		per_cpu(cpu_max_freq, cpu) = policy->max;
+		per_cpu(cpu_cur_freq, cpu) = policy->cur;
+		per_cpu(cpu_set_freq, cpu) = policy->cur;
+		dprintk("managing cpu %u started "
+			"(%u - %u kHz, currently %u kHz)\n",
+				cpu,
+				per_cpu(cpu_min_freq, cpu),
+				per_cpu(cpu_max_freq, cpu),
+				per_cpu(cpu_cur_freq, cpu));
 
 		mutex_unlock(&userspace_mutex);
 		break;
@@ -145,34 +152,34 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 					CPUFREQ_TRANSITION_NOTIFIER);
 		}
 
-		cpu_is_managed[cpu] = 0;
-		cpu_min_freq[cpu] = 0;
-		cpu_max_freq[cpu] = 0;
-		cpu_set_freq[cpu] = 0;
+		per_cpu(cpu_is_managed, cpu) = 0;
+		per_cpu(cpu_min_freq, cpu) = 0;
+		per_cpu(cpu_max_freq, cpu) = 0;
+		per_cpu(cpu_set_freq, cpu) = 0;
 		dprintk("managing cpu %u stopped\n", cpu);
 		mutex_unlock(&userspace_mutex);
 		break;
 	case CPUFREQ_GOV_LIMITS:
 		mutex_lock(&userspace_mutex);
-		dprintk("limit event for cpu %u: %u - %u kHz,"
+		dprintk("limit event for cpu %u: %u - %u kHz, "
 			"currently %u kHz, last set to %u kHz\n",
 			cpu, policy->min, policy->max,
-			cpu_cur_freq[cpu], cpu_set_freq[cpu]);
-		if (policy->max < cpu_set_freq[cpu]) {
+			per_cpu(cpu_cur_freq, cpu),
+			per_cpu(cpu_set_freq, cpu));
+		if (policy->max < per_cpu(cpu_set_freq, cpu)) {
 			__cpufreq_driver_target(policy, policy->max,
 						CPUFREQ_RELATION_H);
-		}
-		else if (policy->min > cpu_set_freq[cpu]) {
+		} else if (policy->min > per_cpu(cpu_set_freq, cpu)) {
 			__cpufreq_driver_target(policy, policy->min,
 						CPUFREQ_RELATION_L);
-		}
-		else {
-			__cpufreq_driver_target(policy, cpu_set_freq[cpu],
+		} else {
+			__cpufreq_driver_target(policy,
+						per_cpu(cpu_set_freq, cpu),
 						CPUFREQ_RELATION_L);
 		}
-		cpu_min_freq[cpu] = policy->min;
-		cpu_max_freq[cpu] = policy->max;
-		cpu_cur_freq[cpu] = policy->cur;
+		per_cpu(cpu_min_freq, cpu) = policy->min;
+		per_cpu(cpu_max_freq, cpu) = policy->max;
+		per_cpu(cpu_cur_freq, cpu) = policy->cur;
 		mutex_unlock(&userspace_mutex);
 		break;
 	}
-- 
cgit v1.2.3


From 80422d3431cc990b967da129f9eb8e3e9989f841 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 18 Jul 2008 18:11:33 -0700
Subject: cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP

  * Rename CPUMASK_VAR --> CPUMASK_PTR (and simplify)

  * Fix a semantic error in CPUMASK_ALLOC

  * Add a bit of commentry to cpumask.h

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/cpumask.h | 33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)

diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 72f9c32c12b..30d59d1d062 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -75,16 +75,36 @@
  * CPU_MASK_NONE			Initializer - no bits set
  * unsigned long *cpus_addr(mask)	Array of unsigned long's in mask
  *
+ * CPUMASK_ALLOC kmalloc's a structure that is a composite of many cpumask_t
+ * variables, and CPUMASK_PTR provides pointers to each field.
+ *
+ * The structure should be defined something like this:
+ * struct my_cpumasks {
+ *	cpumask_t mask1;
+ *	cpumask_t mask2;
+ * };
+ *
+ * Usage is then:
+ *	CPUMASK_ALLOC(my_cpumasks);
+ *	CPUMASK_PTR(mask1, my_cpumasks);
+ *	CPUMASK_PTR(mask2, my_cpumasks);
+ *
+ *	--- DO NOT reference cpumask_t pointers until this check ---
+ *	if (my_cpumasks == NULL)
+ *		"kmalloc failed"...
+ *
+ * References are now pointers to the cpumask_t variables (*mask1, ...)
+ *
  *if NR_CPUS > BITS_PER_LONG
  *   CPUMASK_ALLOC(m)			Declares and allocates struct m *m =
- *					   (struct m *)kmalloc(sizeof(*m), ...)
- *   CPUMASK_FREE(m)			Macro for kfree(v)
+ *						kmalloc(sizeof(*m), GFP_KERNEL)
+ *   CPUMASK_FREE(m)			Macro for kfree(m)
  *else
  *   CPUMASK_ALLOC(m)			Declares struct m _m, *m = &_m
  *   CPUMASK_FREE(m)			Nop
  *endif
- *   CPUMASK_VAR(v, m)			Declares cpumask_t *v =
- *						m + offset(struct m, v)
+ *   CPUMASK_PTR(v, m)			Declares cpumask_t *v = &(m->v)
+ * ------------------------------------------------------------------------
  *
  * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing
  * int cpumask_parse_user(ubuf, ulen, mask)	Parse ascii string as cpumask
@@ -326,11 +346,10 @@ extern cpumask_t cpu_mask_all;
 #define	CPUMASK_ALLOC(m)	struct m *m = kmalloc(sizeof(*m), GFP_KERNEL)
 #define	CPUMASK_FREE(m)		kfree(m)
 #else
-#define	CPUMASK_ALLOC(m)	struct allmasks _m, *m = &_m
+#define	CPUMASK_ALLOC(m)	struct m _m, *m = &_m
 #define	CPUMASK_FREE(m)
 #endif
-#define	CPUMASK_VAR(v, m) 	cpumask_t *v = (cpumask_t *)		\
-				((unsigned long)(m) + offsetof(struct m, v))
+#define	CPUMASK_PTR(v, m) 	cpumask_t *v = &(m->v)
 
 #define cpumask_scnprintf(buf, len, src) \
 			__cpumask_scnprintf((buf), (len), &(src), NR_CPUS)
-- 
cgit v1.2.3


From c4762aba0b1f72659aae9ce37b772ca8bd8f06f4 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 18 Jul 2008 18:11:34 -0700
Subject: NR_CPUS: Replace NR_CPUS in speedstep-centrino.c

Some cleanups in speedstep-centrino.c for NR_CPUS=4096.

  * Use new CPUMASK_PTR (instead of old CPUMASK_VAR).

  * Replace arrays sized by NR_CPUS with percpu variables.

  * Cleanup some formatting problems (>80 chars per line)
    and other checkpatch complaints.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 85 ++++++++++++++----------
 1 file changed, 51 insertions(+), 34 deletions(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 470c016cb25..ca2ac13b7af 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -28,7 +28,8 @@
 #define PFX		"speedstep-centrino: "
 #define MAINTAINER	"cpufreq@lists.linux.org.uk"
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+#define dprintk(msg...) \
+	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
 
 #define INTEL_MSR_RANGE	(0xffff)
 
@@ -66,11 +67,12 @@ struct cpu_model
 
 	struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
 };
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x);
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x);
 
 /* Operating points for current CPU */
-static struct cpu_model *centrino_model[NR_CPUS];
-static const struct cpu_id *centrino_cpu[NR_CPUS];
+static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
+static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
 
 static struct cpufreq_driver centrino_driver;
 
@@ -255,7 +257,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 		return -ENOENT;
 	}
 
-	centrino_model[policy->cpu] = model;
+	per_cpu(centrino_model, policy->cpu) = model;
 
 	dprintk("found \"%s\": max frequency: %dkHz\n",
 	       model->model_name, model->max_freq);
@@ -264,10 +266,14 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 }
 
 #else
-static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; }
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+	return -ENODEV;
+}
 #endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
 
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x)
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x)
 {
 	if ((c->x86 == x->x86) &&
 	    (c->x86_model == x->x86_model) &&
@@ -286,23 +292,28 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
 	 * for centrino, as some DSDTs are buggy.
 	 * Ideally, this can be done using the acpi_data structure.
 	 */
-	if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) ||
-	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) ||
-	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) {
+	if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
 		msr = (msr >> 8) & 0xff;
 		return msr * 100000;
 	}
 
-	if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points))
+	if ((!per_cpu(centrino_model, cpu)) ||
+	    (!per_cpu(centrino_model, cpu)->op_points))
 		return 0;
 
 	msr &= 0xffff;
-	for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) {
-		if (msr == centrino_model[cpu]->op_points[i].index)
-			return centrino_model[cpu]->op_points[i].frequency;
+	for (i = 0;
+		per_cpu(centrino_model, cpu)->op_points[i].frequency
+							!= CPUFREQ_TABLE_END;
+	     i++) {
+		if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
+			return per_cpu(centrino_model, cpu)->
+							op_points[i].frequency;
 	}
 	if (failsafe)
-		return centrino_model[cpu]->op_points[i-1].frequency;
+		return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
 	else
 		return 0;
 }
@@ -348,7 +359,8 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 	int i;
 
 	/* Only Intel makes Enhanced Speedstep-capable CPUs */
-	if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST))
+	if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+	    !cpu_has(cpu, X86_FEATURE_EST))
 		return -ENODEV;
 
 	if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
@@ -362,9 +374,9 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 			break;
 
 	if (i != N_IDS)
-		centrino_cpu[policy->cpu] = &cpu_ids[i];
+		per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
 
-	if (!centrino_cpu[policy->cpu]) {
+	if (!per_cpu(centrino_cpu, policy->cpu)) {
 		dprintk("found unsupported CPU with "
 		"Enhanced SpeedStep: send /proc/cpuinfo to "
 		MAINTAINER "\n");
@@ -387,23 +399,26 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 		/* check to see if it stuck */
 		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 		if (!(l & (1<<16))) {
-			printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n");
+			printk(KERN_INFO PFX
+				"couldn't enable Enhanced SpeedStep\n");
 			return -ENODEV;
 		}
 	}
 
 	freq = get_cur_freq(policy->cpu);
-
-	policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
+	policy->cpuinfo.transition_latency = 10000;
+						/* 10uS transition latency */
 	policy->cur = freq;
 
 	dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
 
-	ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points);
+	ret = cpufreq_frequency_table_cpuinfo(policy,
+		per_cpu(centrino_model, policy->cpu)->op_points);
 	if (ret)
 		return (ret);
 
-	cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu);
+	cpufreq_frequency_table_get_attr(
+		per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
 
 	return 0;
 }
@@ -412,12 +427,12 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
 
-	if (!centrino_model[cpu])
+	if (!per_cpu(centrino_model, cpu))
 		return -ENODEV;
 
 	cpufreq_frequency_table_put_attr(cpu);
 
-	centrino_model[cpu] = NULL;
+	per_cpu(centrino_model, cpu) = NULL;
 
 	return 0;
 }
@@ -431,14 +446,16 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
  */
 static int centrino_verify (struct cpufreq_policy *policy)
 {
-	return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points);
+	return cpufreq_frequency_table_verify(policy,
+			per_cpu(centrino_model, policy->cpu)->op_points);
 }
 
 /**
  * centrino_setpolicy - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
@@ -459,21 +476,21 @@ static int centrino_target (struct cpufreq_policy *policy,
 	int			retval = 0;
 	unsigned int		j, k, first_cpu, tmp;
 	CPUMASK_ALLOC(allmasks);
-	CPUMASK_VAR(online_policy_cpus, allmasks);
-	CPUMASK_VAR(saved_mask, allmasks);
-	CPUMASK_VAR(set_mask, allmasks);
-	CPUMASK_VAR(covered_cpus, allmasks);
+	CPUMASK_PTR(online_policy_cpus, allmasks);
+	CPUMASK_PTR(saved_mask, allmasks);
+	CPUMASK_PTR(set_mask, allmasks);
+	CPUMASK_PTR(covered_cpus, allmasks);
 
 	if (unlikely(allmasks == NULL))
 		return -ENOMEM;
 
-	if (unlikely(centrino_model[cpu] == NULL)) {
+	if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
 		retval = -ENODEV;
 		goto out;
 	}
 
 	if (unlikely(cpufreq_frequency_table_target(policy,
-			centrino_model[cpu]->op_points,
+			per_cpu(centrino_model, cpu)->op_points,
 			target_freq,
 			relation,
 			&newstate))) {
@@ -515,7 +532,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			break;
 		}
 
-		msr = centrino_model[cpu]->op_points[newstate].index;
+		msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
 
 		if (first_cpu) {
 			rdmsr(MSR_IA32_PERF_CTL, oldmsr, h);
-- 
cgit v1.2.3


From 31656519e132f6612584815f128c83976a9aaaef Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Fri, 18 Jul 2008 18:01:23 +0200
Subject: sched, x86: clean up hrtick implementation

random uvesafb failures were reported against Gentoo:

  http://bugs.gentoo.org/show_bug.cgi?id=222799

and Mihai Moldovan bisected it back to:

> 8f4d37ec073c17e2d4aa8851df5837d798606d6f is first bad commit
> commit 8f4d37ec073c17e2d4aa8851df5837d798606d6f
> Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
> Date:   Fri Jan 25 21:08:29 2008 +0100
>
>    sched: high-res preemption tick

Linus suspected it to be hrtick + vm86 interaction and observed:

> Btw, Peter, Ingo: I think that commit is doing bad things. They aren't
> _incorrect_ per se, but they are definitely bad.
>
> Why?
>
> Using random _TIF_WORK_MASK flags is really impolite for doing
> "scheduling" work. There's a reason that arch/x86/kernel/entry_32.S
> special-cases the _TIF_NEED_RESCHED flag: we don't want to exit out of
> vm86 mode unnecessarily.
>
> See the "work_notifysig_v86" label, and how it does that
> "save_v86_state()" thing etc etc.

Right, I never liked having to fiddle with those TIF flags. Initially I
needed it because the hrtimer base lock could not nest in the rq lock.
That however is fixed these days.

Currently the only reason left to fiddle with the TIF flags is remote
wakeups. We cannot program a remote cpu's hrtimer. I've been thinking
about using the new and improved IPI function call stuff to implement
hrtimer_start_on().

However that does require that smp_call_function_single(.wait=0) works
from interrupt context - /me looks at the latest series from Jens - Yes
that does seem to be supported, good.

Here's a stab at cleaning this stuff up ...

Mihai reported test success as well.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Mihai Moldovan <ionic@ionic.de>
Cc: Michal Januszewski <spock@gentoo.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/signal_32.c   |   3 -
 arch/x86/kernel/signal_64.c   |   3 -
 include/asm-x86/thread_info.h |   4 +-
 kernel/Kconfig.hz             |   2 +-
 kernel/sched.c                | 202 +++++++++++++-----------------------------
 kernel/sched_fair.c           |   5 +-
 6 files changed, 64 insertions(+), 155 deletions(-)

diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index d9237363096..e1fc7bd57bf 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -667,8 +667,5 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
 
-	if (thread_info_flags & _TIF_HRTICK_RESCHED)
-		hrtick_resched();
-
 	clear_thread_flag(TIF_IRET);
 }
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index e53b267662e..88023fcc704 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -502,9 +502,6 @@ void do_notify_resume(struct pt_regs *regs, void *unused,
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
-
-	if (thread_info_flags & _TIF_HRTICK_RESCHED)
-		hrtick_resched();
 }
 
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h
index 895339d2bc0..d7012634ace 100644
--- a/include/asm-x86/thread_info.h
+++ b/include/asm-x86/thread_info.h
@@ -81,7 +81,6 @@ struct thread_info {
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SECCOMP		8	/* secure computing */
 #define TIF_MCE_NOTIFY		10	/* notify userspace of an MCE */
-#define TIF_HRTICK_RESCHED	11	/* reprogram hrtick timer */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* 32bit process */
 #define TIF_FORK		18	/* ret_from_fork */
@@ -108,7 +107,6 @@ struct thread_info {
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_MCE_NOTIFY		(1 << TIF_MCE_NOTIFY)
-#define _TIF_HRTICK_RESCHED	(1 << TIF_HRTICK_RESCHED)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_IA32		(1 << TIF_IA32)
 #define _TIF_FORK		(1 << TIF_FORK)
@@ -132,7 +130,7 @@ struct thread_info {
 
 /* Only used for 64 bit */
 #define _TIF_DO_NOTIFY_MASK						\
-	(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED)
+	(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY)
 
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW							\
diff --git a/kernel/Kconfig.hz b/kernel/Kconfig.hz
index 526128a2e62..2a202a84675 100644
--- a/kernel/Kconfig.hz
+++ b/kernel/Kconfig.hz
@@ -55,4 +55,4 @@ config HZ
 	default 1000 if HZ_1000
 
 config SCHED_HRTICK
-	def_bool HIGH_RES_TIMERS && X86
+	def_bool HIGH_RES_TIMERS
diff --git a/kernel/sched.c b/kernel/sched.c
index 1ee18dbb451..c13c75e9f9f 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -571,8 +571,10 @@ struct rq {
 #endif
 
 #ifdef CONFIG_SCHED_HRTICK
-	unsigned long hrtick_flags;
-	ktime_t hrtick_expire;
+#ifdef CONFIG_SMP
+	int hrtick_csd_pending;
+	struct call_single_data hrtick_csd;
+#endif
 	struct hrtimer hrtick_timer;
 #endif
 
@@ -983,13 +985,6 @@ static struct rq *this_rq_lock(void)
 	return rq;
 }
 
-static void __resched_task(struct task_struct *p, int tif_bit);
-
-static inline void resched_task(struct task_struct *p)
-{
-	__resched_task(p, TIF_NEED_RESCHED);
-}
-
 #ifdef CONFIG_SCHED_HRTICK
 /*
  * Use HR-timers to deliver accurate preemption points.
@@ -1001,25 +996,6 @@ static inline void resched_task(struct task_struct *p)
  * When we get rescheduled we reprogram the hrtick_timer outside of the
  * rq->lock.
  */
-static inline void resched_hrt(struct task_struct *p)
-{
-	__resched_task(p, TIF_HRTICK_RESCHED);
-}
-
-static inline void resched_rq(struct rq *rq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&rq->lock, flags);
-	resched_task(rq->curr);
-	spin_unlock_irqrestore(&rq->lock, flags);
-}
-
-enum {
-	HRTICK_SET,		/* re-programm hrtick_timer */
-	HRTICK_RESET,		/* not a new slice */
-	HRTICK_BLOCK,		/* stop hrtick operations */
-};
 
 /*
  * Use hrtick when:
@@ -1030,72 +1006,17 @@ static inline int hrtick_enabled(struct rq *rq)
 {
 	if (!sched_feat(HRTICK))
 		return 0;
-	if (unlikely(test_bit(HRTICK_BLOCK, &rq->hrtick_flags)))
+	if (!cpu_online(cpu_of(rq)))
 		return 0;
 	return hrtimer_is_hres_active(&rq->hrtick_timer);
 }
 
-/*
- * Called to set the hrtick timer state.
- *
- * called with rq->lock held and irqs disabled
- */
-static void hrtick_start(struct rq *rq, u64 delay, int reset)
-{
-	assert_spin_locked(&rq->lock);
-
-	/*
-	 * preempt at: now + delay
-	 */
-	rq->hrtick_expire =
-		ktime_add_ns(rq->hrtick_timer.base->get_time(), delay);
-	/*
-	 * indicate we need to program the timer
-	 */
-	__set_bit(HRTICK_SET, &rq->hrtick_flags);
-	if (reset)
-		__set_bit(HRTICK_RESET, &rq->hrtick_flags);
-
-	/*
-	 * New slices are called from the schedule path and don't need a
-	 * forced reschedule.
-	 */
-	if (reset)
-		resched_hrt(rq->curr);
-}
-
 static void hrtick_clear(struct rq *rq)
 {
 	if (hrtimer_active(&rq->hrtick_timer))
 		hrtimer_cancel(&rq->hrtick_timer);
 }
 
-/*
- * Update the timer from the possible pending state.
- */
-static void hrtick_set(struct rq *rq)
-{
-	ktime_t time;
-	int set, reset;
-	unsigned long flags;
-
-	WARN_ON_ONCE(cpu_of(rq) != smp_processor_id());
-
-	spin_lock_irqsave(&rq->lock, flags);
-	set = __test_and_clear_bit(HRTICK_SET, &rq->hrtick_flags);
-	reset = __test_and_clear_bit(HRTICK_RESET, &rq->hrtick_flags);
-	time = rq->hrtick_expire;
-	clear_thread_flag(TIF_HRTICK_RESCHED);
-	spin_unlock_irqrestore(&rq->lock, flags);
-
-	if (set) {
-		hrtimer_start(&rq->hrtick_timer, time, HRTIMER_MODE_ABS);
-		if (reset && !hrtimer_active(&rq->hrtick_timer))
-			resched_rq(rq);
-	} else
-		hrtick_clear(rq);
-}
-
 /*
  * High-resolution timer tick.
  * Runs from hardirq context with interrupts disabled.
@@ -1115,27 +1036,37 @@ static enum hrtimer_restart hrtick(struct hrtimer *timer)
 }
 
 #ifdef CONFIG_SMP
-static void hotplug_hrtick_disable(int cpu)
+/*
+ * called from hardirq (IPI) context
+ */
+static void __hrtick_start(void *arg)
 {
-	struct rq *rq = cpu_rq(cpu);
-	unsigned long flags;
-
-	spin_lock_irqsave(&rq->lock, flags);
-	rq->hrtick_flags = 0;
-	__set_bit(HRTICK_BLOCK, &rq->hrtick_flags);
-	spin_unlock_irqrestore(&rq->lock, flags);
+	struct rq *rq = arg;
 
-	hrtick_clear(rq);
+	spin_lock(&rq->lock);
+	hrtimer_restart(&rq->hrtick_timer);
+	rq->hrtick_csd_pending = 0;
+	spin_unlock(&rq->lock);
 }
 
-static void hotplug_hrtick_enable(int cpu)
+/*
+ * Called to set the hrtick timer state.
+ *
+ * called with rq->lock held and irqs disabled
+ */
+static void hrtick_start(struct rq *rq, u64 delay)
 {
-	struct rq *rq = cpu_rq(cpu);
-	unsigned long flags;
+	struct hrtimer *timer = &rq->hrtick_timer;
+	ktime_t time = ktime_add_ns(timer->base->get_time(), delay);
 
-	spin_lock_irqsave(&rq->lock, flags);
-	__clear_bit(HRTICK_BLOCK, &rq->hrtick_flags);
-	spin_unlock_irqrestore(&rq->lock, flags);
+	timer->expires = time;
+
+	if (rq == this_rq()) {
+		hrtimer_restart(timer);
+	} else if (!rq->hrtick_csd_pending) {
+		__smp_call_function_single(cpu_of(rq), &rq->hrtick_csd);
+		rq->hrtick_csd_pending = 1;
+	}
 }
 
 static int
@@ -1150,16 +1081,7 @@ hotplug_hrtick(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	case CPU_DOWN_PREPARE_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		hotplug_hrtick_disable(cpu);
-		return NOTIFY_OK;
-
-	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
-	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-		hotplug_hrtick_enable(cpu);
+		hrtick_clear(cpu_rq(cpu));
 		return NOTIFY_OK;
 	}
 
@@ -1170,46 +1092,45 @@ static void init_hrtick(void)
 {
 	hotcpu_notifier(hotplug_hrtick, 0);
 }
-#endif /* CONFIG_SMP */
+#else
+/*
+ * Called to set the hrtick timer state.
+ *
+ * called with rq->lock held and irqs disabled
+ */
+static void hrtick_start(struct rq *rq, u64 delay)
+{
+	hrtimer_start(&rq->hrtick_timer, ns_to_ktime(delay), HRTIMER_MODE_REL);
+}
 
-static void init_rq_hrtick(struct rq *rq)
+static void init_hrtick(void)
 {
-	rq->hrtick_flags = 0;
-	hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	rq->hrtick_timer.function = hrtick;
-	rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
 }
+#endif /* CONFIG_SMP */
 
-void hrtick_resched(void)
+static void init_rq_hrtick(struct rq *rq)
 {
-	struct rq *rq;
-	unsigned long flags;
+#ifdef CONFIG_SMP
+	rq->hrtick_csd_pending = 0;
 
-	if (!test_thread_flag(TIF_HRTICK_RESCHED))
-		return;
+	rq->hrtick_csd.flags = 0;
+	rq->hrtick_csd.func = __hrtick_start;
+	rq->hrtick_csd.info = rq;
+#endif
 
-	local_irq_save(flags);
-	rq = cpu_rq(smp_processor_id());
-	hrtick_set(rq);
-	local_irq_restore(flags);
+	hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	rq->hrtick_timer.function = hrtick;
+	rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
 }
 #else
 static inline void hrtick_clear(struct rq *rq)
 {
 }
 
-static inline void hrtick_set(struct rq *rq)
-{
-}
-
 static inline void init_rq_hrtick(struct rq *rq)
 {
 }
 
-void hrtick_resched(void)
-{
-}
-
 static inline void init_hrtick(void)
 {
 }
@@ -1228,16 +1149,16 @@ static inline void init_hrtick(void)
 #define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
 #endif
 
-static void __resched_task(struct task_struct *p, int tif_bit)
+static void resched_task(struct task_struct *p)
 {
 	int cpu;
 
 	assert_spin_locked(&task_rq(p)->lock);
 
-	if (unlikely(test_tsk_thread_flag(p, tif_bit)))
+	if (unlikely(test_tsk_thread_flag(p, TIF_NEED_RESCHED)))
 		return;
 
-	set_tsk_thread_flag(p, tif_bit);
+	set_tsk_thread_flag(p, TIF_NEED_RESCHED);
 
 	cpu = task_cpu(p);
 	if (cpu == smp_processor_id())
@@ -1303,10 +1224,10 @@ void wake_up_idle_cpu(int cpu)
 #endif /* CONFIG_NO_HZ */
 
 #else /* !CONFIG_SMP */
-static void __resched_task(struct task_struct *p, int tif_bit)
+static void resched_task(struct task_struct *p)
 {
 	assert_spin_locked(&task_rq(p)->lock);
-	set_tsk_thread_flag(p, tif_bit);
+	set_tsk_need_resched(p);
 }
 #endif /* CONFIG_SMP */
 
@@ -4395,7 +4316,7 @@ asmlinkage void __sched schedule(void)
 	struct task_struct *prev, *next;
 	unsigned long *switch_count;
 	struct rq *rq;
-	int cpu, hrtick = sched_feat(HRTICK);
+	int cpu;
 
 need_resched:
 	preempt_disable();
@@ -4410,7 +4331,7 @@ need_resched_nonpreemptible:
 
 	schedule_debug(prev);
 
-	if (hrtick)
+	if (sched_feat(HRTICK))
 		hrtick_clear(rq);
 
 	/*
@@ -4457,9 +4378,6 @@ need_resched_nonpreemptible:
 	} else
 		spin_unlock_irq(&rq->lock);
 
-	if (hrtick)
-		hrtick_set(rq);
-
 	if (unlikely(reacquire_kernel_lock(current) < 0))
 		goto need_resched_nonpreemptible;
 
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index f2aa987027d..6893b3ed65f 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -878,7 +878,6 @@ entity_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr, int queued)
 #ifdef CONFIG_SCHED_HRTICK
 static void hrtick_start_fair(struct rq *rq, struct task_struct *p)
 {
-	int requeue = rq->curr == p;
 	struct sched_entity *se = &p->se;
 	struct cfs_rq *cfs_rq = cfs_rq_of(se);
 
@@ -899,10 +898,10 @@ static void hrtick_start_fair(struct rq *rq, struct task_struct *p)
 		 * Don't schedule slices shorter than 10000ns, that just
 		 * doesn't make sense. Rely on vruntime for fairness.
 		 */
-		if (!requeue)
+		if (rq->curr != p)
 			delta = max(10000LL, delta);
 
-		hrtick_start(rq, delta, requeue);
+		hrtick_start(rq, delta);
 	}
 }
 #else /* !CONFIG_SCHED_HRTICK */
-- 
cgit v1.2.3


From ba42059fbd0aa1ac91b582412b5fedb1258f241f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 20 Jul 2008 11:02:06 +0200
Subject: sched: hrtick_enabled() should use cpu_active()

Peter pointed out that hrtick_enabled() should use cpu_active().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 85cf246cfdf..62b1b8ecb5c 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1006,7 +1006,7 @@ static inline int hrtick_enabled(struct rq *rq)
 {
 	if (!sched_feat(HRTICK))
 		return 0;
-	if (!cpu_online(cpu_of(rq)))
+	if (!cpu_active(cpu_of(rq)))
 		return 0;
 	return hrtimer_is_hres_active(&rq->hrtick_timer);
 }
-- 
cgit v1.2.3


From f9543d0ab6392a9a5bff0034622688dc10d9d225 Mon Sep 17 00:00:00 2001
From: JiSheng Zhang <jszhang3@mail.ustc.edu.cn>
Date: Sat, 19 Jul 2008 15:35:41 +0800
Subject: firewire: queue the right number of data

There will be 4 padding bytes in struct fw_cdev_event_response on some platforms
The member:__u32 data will point to these padding bytes. While queue the
response and data in complete_transaction in fw-cdev.c, it will queue like this:
|response(excluding padding bytes)|4 padding bytes|4 padding bytes|data.
It queue 4 extra bytes. That is to say it use "&response + sizeof(response)"
while other place of kernel and userspace library use "&response + offsetof
(typeof(response), data)". So it will lost the last 4 bytes of data. This patch
can fix it while not changing the struct definition.

Signed-off-by: JiSheng Zhang <jszhang3@mail.ustc.edu.cn>

This fixes responses to outbound block read requests on 64bit architectures.
Tested on i686, x86-64, and x86-64 with i686 userland, using firecontrol and
gscanbus.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/fw-cdev.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index c639915fc3c..bc81d6fcd2f 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -382,9 +382,9 @@ complete_transaction(struct fw_card *card, int rcode,
 
 	response->response.type   = FW_CDEV_EVENT_RESPONSE;
 	response->response.rcode  = rcode;
-	queue_event(client, &response->event,
-		    &response->response, sizeof(response->response),
-		    response->response.data, response->response.length);
+	queue_event(client, &response->event, &response->response,
+		    sizeof(response->response) + response->response.length,
+		    NULL, 0);
 }
 
 static int ioctl_send_request(struct client *client, void *buffer)
-- 
cgit v1.2.3


From 9432484110263e9418f380faf05fa9e2e7fb87a0 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 20 Jul 2008 17:36:20 +0200
Subject: ALSA: soc - wm9712 mono mixer

this fixes typo in wm9712 codec which prevents it from registering all audio
routes (and thus working correctly). Please consider applying.

(Tested and works on palmtx, palmld and palmt5)

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mark Brown <brooie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/codecs/wm9712.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 9fc8edd8222..1fb7f9a7aec 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -427,20 +427,20 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"HPOUTR", NULL, "Headphone PGA"},
 	{"Headphone PGA", NULL, "Right HP Mixer"},
 
-	/* mono hp mixer */
-	{"Mono HP Mixer", NULL, "Left HP Mixer"},
-	{"Mono HP Mixer", NULL, "Right HP Mixer"},
+	/* mono mixer */
+	{"Mono Mixer", NULL, "Left HP Mixer"},
+	{"Mono Mixer", NULL, "Right HP Mixer"},
 
 	/* Out3 Mux */
 	{"Out3 Mux", "Left", "Left HP Mixer"},
 	{"Out3 Mux", "Mono", "Phone Mixer"},
-	{"Out3 Mux", "Left + Right", "Mono HP Mixer"},
+	{"Out3 Mux", "Left + Right", "Mono Mixer"},
 	{"Out 3 PGA", NULL, "Out3 Mux"},
 	{"OUT3", NULL, "Out 3 PGA"},
 
 	/* speaker Mux */
 	{"Speaker Mux", "Speaker Mix", "Speaker Mixer"},
-	{"Speaker Mux", "Headphone Mix", "Mono HP Mixer"},
+	{"Speaker Mux", "Headphone Mix", "Mono Mixer"},
 	{"Speaker PGA", NULL, "Speaker Mux"},
 	{"LOUT2", NULL, "Speaker PGA"},
 	{"ROUT2", NULL, "Speaker PGA"},
-- 
cgit v1.2.3


From f887cce8de019bb32917789379af89ae4c0294ee Mon Sep 17 00:00:00 2001
From: Francois Romieu <romieu@fr.zoreil.com>
Date: Thu, 17 Jul 2008 22:24:18 +0200
Subject: r8169: multicast register update

The layout of the 8101 series is identical to that of the 8168 one,
thus allowing to pack everything not 8169 related above MAC_VER_06.
New 810x and 8168 chipsets should automagically behave correctly.

It matches code in Realtek's 1.008.00 8101 and 8.007.00 8168 drivers.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
---
 drivers/net/r8169.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index cfe8829ed31..2a5486ffe5c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -3032,13 +3032,7 @@ static void rtl_set_rx_mode(struct net_device *dev)
 	tmp = rtl8169_rx_config | rx_mode |
 	      (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
 
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_11) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_12) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_13) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_14) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_15) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_16) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_17)) {
+	if (tp->mac_version > RTL_GIGA_MAC_VER_06) {
 		u32 data = mc_filter[0];
 
 		mc_filter[0] = swab32(mc_filter[1]);
-- 
cgit v1.2.3


From 77332894c21165404496c56763d7df6c15c4bb09 Mon Sep 17 00:00:00 2001
From: Marcus Sundberg <marcus@ingate.com>
Date: Thu, 10 Jul 2008 21:28:08 +0200
Subject: r8169: avoid thrashing PCI conf space above RTL_GIGA_MAC_VER_06
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The magic write to register 0x82 will often cause PCI config space on
my 8168 (PCI ID 10ec:8168, revision 2. mounted in an LG P300 laptop)
to be filled with ones during driver load, and thus breaking NIC
operation until reboot. If it does not happen on first driver load it
can easily be reproduced by unloading and loading the driver a few
times.

The magic write was added long ago by this commit:

Author: François Romieu <romieu@fr.zoreil.com>
Date:   Sat Jan 10 06:00:46 2004 -0500

     [netdrvr r8169] Merge of changes done by Realtek to rtl8169_init_one():
     - phy capability settings allows lower or equal capability as suggested
       in Realtek's changes;
     - I/O voodoo;
     - no need to s/mdio_write/RTL8169_WRITE_GMII_REG/;
     - s/rtl8169_hw_PHY_config/rtl8169_hw_phy_config/;
     - rtl8169_hw_phy_config(): ad-hoc struct "phy_magic" to limit duplication
       of code (yep, the u16 -> int conversions should work as expected);
     - variable renames and whitepace changes ignored.

As the 8168 wasn't supported by that version this patch simply removes
the bogus write from mac versions <= RTL_GIGA_MAC_VER_06.

[The change above makes sense for the 8101/8102 too -- Ueimor]

Signed-off-by: Marcus Sundberg <marcus@ingate.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
---
 drivers/net/r8169.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 2a5486ffe5c..a3e3895e503 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1418,8 +1418,10 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
 
 	rtl_hw_phy_config(dev);
 
-	dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
-	RTL_W8(0x82, 0x01);
+	if (tp->mac_version <= RTL_GIGA_MAC_VER_06) {
+		dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
+		RTL_W8(0x82, 0x01);
+	}
 
 	pci_write_config_byte(tp->pci_dev, PCI_LATENCY_TIMER, 0x40);
 
-- 
cgit v1.2.3


From 3a87208028ef59215a88a143c723ac0b83c11df0 Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Mon, 21 Jul 2008 09:15:49 -0300
Subject: ACPI: thinkpad-acpi: minor refactor on radio switch init

Change the code of hotkey_init, wan_init and bluetooth_init a bit to make it
much easier to add some Kconfig-selected debugging code later.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
---
 drivers/misc/thinkpad_acpi.c | 49 +++++++++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 23 deletions(-)

diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index b5969298f3d..c800855be27 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -2167,9 +2167,10 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		printk(TPACPI_INFO
 			"radio switch found; radios are %s\n",
 			enabled(status, 0));
+	}
+	if (tp_features.hotkey_wlsw)
 		res = add_to_attr_set(hotkey_dev_attributes,
 				&dev_attr_hotkey_radio_sw.attr);
-	}
 
 	/* For X41t, X60t, X61t Tablets... */
 	if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
@@ -2646,18 +2647,19 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
 		str_supported(tp_features.bluetooth),
 		status);
 
+	if (tp_features.bluetooth &&
+	    !(status & TP_ACPI_BLUETOOTH_HWPRESENT)) {
+		/* no bluetooth hardware present in system */
+		tp_features.bluetooth = 0;
+		dbg_printk(TPACPI_DBG_INIT,
+			   "bluetooth hardware not installed\n");
+	}
+
 	if (tp_features.bluetooth) {
-		if (!(status & TP_ACPI_BLUETOOTH_HWPRESENT)) {
-			/* no bluetooth hardware present in system */
-			tp_features.bluetooth = 0;
-			dbg_printk(TPACPI_DBG_INIT,
-				   "bluetooth hardware not installed\n");
-		} else {
-			res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
-					&bluetooth_attr_group);
-			if (res)
-				return res;
-		}
+		res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+				&bluetooth_attr_group);
+		if (res)
+			return res;
 	}
 
 	return (tp_features.bluetooth)? 0 : 1;
@@ -2818,18 +2820,19 @@ static int __init wan_init(struct ibm_init_struct *iibm)
 		str_supported(tp_features.wan),
 		status);
 
+	if (tp_features.wan &&
+	    !(status & TP_ACPI_WANCARD_HWPRESENT)) {
+		/* no wan hardware present in system */
+		tp_features.wan = 0;
+		dbg_printk(TPACPI_DBG_INIT,
+			   "wan hardware not installed\n");
+	}
+
 	if (tp_features.wan) {
-		if (!(status & TP_ACPI_WANCARD_HWPRESENT)) {
-			/* no wan hardware present in system */
-			tp_features.wan = 0;
-			dbg_printk(TPACPI_DBG_INIT,
-				   "wan hardware not installed\n");
-		} else {
-			res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
-					&wan_attr_group);
-			if (res)
-				return res;
-		}
+		res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+				&wan_attr_group);
+		if (res)
+			return res;
 	}
 
 	return (tp_features.wan)? 0 : 1;
-- 
cgit v1.2.3


From 733e27c1cc86afae2d9481838693661b3d839950 Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Mon, 21 Jul 2008 09:15:49 -0300
Subject: ACPI: thinkpad-acpi: consolidate wlsw notification function

Rename tpacpi_input_send_radiosw() to tpacpi_send_radiosw_update(), and
make it a central point to issue "radio switch changed state" notifications
by consolidating also the poll() notification in the same function.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
---
 drivers/misc/thinkpad_acpi.c | 39 +++++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 20 deletions(-)

diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index c800855be27..9179f2367d4 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -1285,21 +1285,6 @@ static int hotkey_status_set(int status)
 	return 0;
 }
 
-static void tpacpi_input_send_radiosw(void)
-{
-	int wlsw;
-
-	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) {
-		mutex_lock(&tpacpi_inputdev_send_mutex);
-
-		input_report_switch(tpacpi_inputdev,
-				    SW_RFKILL_ALL, !!wlsw);
-		input_sync(tpacpi_inputdev);
-
-		mutex_unlock(&tpacpi_inputdev_send_mutex);
-	}
-}
-
 static void tpacpi_input_send_tabletsw(void)
 {
 	int state;
@@ -1921,6 +1906,22 @@ static struct attribute *hotkey_mask_attributes[] __initdata = {
 	&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
 };
 
+static void tpacpi_send_radiosw_update(void)
+{
+	int wlsw;
+
+	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) {
+		mutex_lock(&tpacpi_inputdev_send_mutex);
+
+		input_report_switch(tpacpi_inputdev,
+				    SW_RFKILL_ALL, !!wlsw);
+		input_sync(tpacpi_inputdev);
+
+		mutex_unlock(&tpacpi_inputdev_send_mutex);
+	}
+	hotkey_radio_sw_notify_change();
+}
+
 static void hotkey_exit(void)
 {
 #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
@@ -2288,7 +2289,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	tpacpi_inputdev->close = &hotkey_inputdev_close;
 
 	hotkey_poll_setup_safe(1);
-	tpacpi_input_send_radiosw();
+	tpacpi_send_radiosw_update();
 	tpacpi_input_send_tabletsw();
 
 	return 0;
@@ -2420,8 +2421,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 		case 7:
 			/* 0x7000-0x7FFF: misc */
 			if (tp_features.hotkey_wlsw && hkey == 0x7000) {
-				tpacpi_input_send_radiosw();
-				hotkey_radio_sw_notify_change();
+				tpacpi_send_radiosw_update();
 				send_acpi_ev = 0;
 				break;
 			}
@@ -2464,8 +2464,7 @@ static void hotkey_resume(void)
 		printk(TPACPI_ERR
 		       "error while trying to read hot key mask "
 		       "from firmware\n");
-	tpacpi_input_send_radiosw();
-	hotkey_radio_sw_notify_change();
+	tpacpi_send_radiosw_update();
 	hotkey_tablet_mode_notify_change();
 	hotkey_wakeup_reason_notify_change();
 	hotkey_wakeup_hotunplug_complete_notify_change();
-- 
cgit v1.2.3


From 07431ec82bf9dc74b470a1d820b41c92c4d86e6f Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Mon, 21 Jul 2008 09:15:50 -0300
Subject: ACPI: thinkpad-acpi: prepare for bluetooth and wwan rfkill support

Get rid of some forward definitions by moving code around, this will make
the rfkill conversion of wwan and bluetooth a bit cleaner.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
---
 drivers/misc/thinkpad_acpi.c | 154 +++++++++++++++++++++----------------------
 1 file changed, 74 insertions(+), 80 deletions(-)

diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 9179f2367d4..743a4d6098e 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -2581,8 +2581,37 @@ enum {
 	TP_ACPI_BLUETOOTH_UNK		= 0x04,	/* unknown function */
 };
 
-static int bluetooth_get_radiosw(void);
-static int bluetooth_set_radiosw(int radio_on);
+static int bluetooth_get_radiosw(void)
+{
+	int status;
+
+	if (!tp_features.bluetooth)
+		return -ENODEV;
+
+	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
+		return -EIO;
+
+	return (status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0;
+}
+
+static int bluetooth_set_radiosw(int radio_on)
+{
+	int status;
+
+	if (!tp_features.bluetooth)
+		return -ENODEV;
+
+	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
+		return -EIO;
+	if (radio_on)
+		status |= TP_ACPI_BLUETOOTH_RADIOSSW;
+	else
+		status &= ~TP_ACPI_BLUETOOTH_RADIOSSW;
+	if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
+		return -EIO;
+
+	return 0;
+}
 
 /* sysfs bluetooth enable ---------------------------------------------- */
 static ssize_t bluetooth_enable_show(struct device *dev,
@@ -2628,6 +2657,12 @@ static const struct attribute_group bluetooth_attr_group = {
 	.attrs = bluetooth_attributes,
 };
 
+static void bluetooth_exit(void)
+{
+	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+			&bluetooth_attr_group);
+}
+
 static int __init bluetooth_init(struct ibm_init_struct *iibm)
 {
 	int res;
@@ -2664,44 +2699,6 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
 	return (tp_features.bluetooth)? 0 : 1;
 }
 
-static void bluetooth_exit(void)
-{
-	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
-			&bluetooth_attr_group);
-}
-
-static int bluetooth_get_radiosw(void)
-{
-	int status;
-
-	if (!tp_features.bluetooth)
-		return -ENODEV;
-
-	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
-		return -EIO;
-
-	return ((status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0);
-}
-
-static int bluetooth_set_radiosw(int radio_on)
-{
-	int status;
-
-	if (!tp_features.bluetooth)
-		return -ENODEV;
-
-	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
-		return -EIO;
-	if (radio_on)
-		status |= TP_ACPI_BLUETOOTH_RADIOSSW;
-	else
-		status &= ~TP_ACPI_BLUETOOTH_RADIOSSW;
-	if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
-		return -EIO;
-
-	return 0;
-}
-
 /* procfs -------------------------------------------------------------- */
 static int bluetooth_read(char *p)
 {
@@ -2756,8 +2753,37 @@ enum {
 	TP_ACPI_WANCARD_UNK		= 0x04,	/* unknown function */
 };
 
-static int wan_get_radiosw(void);
-static int wan_set_radiosw(int radio_on);
+static int wan_get_radiosw(void)
+{
+	int status;
+
+	if (!tp_features.wan)
+		return -ENODEV;
+
+	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+		return -EIO;
+
+	return (status & TP_ACPI_WANCARD_RADIOSSW) != 0;
+}
+
+static int wan_set_radiosw(int radio_on)
+{
+	int status;
+
+	if (!tp_features.wan)
+		return -ENODEV;
+
+	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+		return -EIO;
+	if (radio_on)
+		status |= TP_ACPI_WANCARD_RADIOSSW;
+	else
+		status &= ~TP_ACPI_WANCARD_RADIOSSW;
+	if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
+		return -EIO;
+
+	return 0;
+}
 
 /* sysfs wan enable ---------------------------------------------------- */
 static ssize_t wan_enable_show(struct device *dev,
@@ -2803,6 +2829,12 @@ static const struct attribute_group wan_attr_group = {
 	.attrs = wan_attributes,
 };
 
+static void wan_exit(void)
+{
+	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+		&wan_attr_group);
+}
+
 static int __init wan_init(struct ibm_init_struct *iibm)
 {
 	int res;
@@ -2837,44 +2869,6 @@ static int __init wan_init(struct ibm_init_struct *iibm)
 	return (tp_features.wan)? 0 : 1;
 }
 
-static void wan_exit(void)
-{
-	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
-		&wan_attr_group);
-}
-
-static int wan_get_radiosw(void)
-{
-	int status;
-
-	if (!tp_features.wan)
-		return -ENODEV;
-
-	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
-		return -EIO;
-
-	return ((status & TP_ACPI_WANCARD_RADIOSSW) != 0);
-}
-
-static int wan_set_radiosw(int radio_on)
-{
-	int status;
-
-	if (!tp_features.wan)
-		return -ENODEV;
-
-	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
-		return -EIO;
-	if (radio_on)
-		status |= TP_ACPI_WANCARD_RADIOSSW;
-	else
-		status &= ~TP_ACPI_WANCARD_RADIOSSW;
-	if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
-		return -EIO;
-
-	return 0;
-}
-
 /* procfs -------------------------------------------------------------- */
 static int wan_read(char *p)
 {
-- 
cgit v1.2.3


From 133ec3bd3ae409895eacdce326cdc8d73c249e8a Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Mon, 21 Jul 2008 09:15:50 -0300
Subject: ACPI: thinkpad-acpi: WLSW overrides other rfkill switches

On ThinkPads where the WLSW switch exists, the firmware or the hardware
ANDs the WLSW state with the device-specific switches (WWAN, Bluetooth).
It is downright impossible to enable WWAN or Bluetooth when WLSW is
blocking the radios.

This reality does not necessarily carry over to the WWAN and Bluetooth
firmware interfaces, though... so the state thinkpad-acpi was reporting
could be incorrect.

Tie the three switches in the driver so that we keep their state sane.
When WLSL is off, force the other switches to off as well.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
---
 drivers/misc/thinkpad_acpi.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 743a4d6098e..202d63e1b39 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -2588,6 +2588,10 @@ static int bluetooth_get_radiosw(void)
 	if (!tp_features.bluetooth)
 		return -ENODEV;
 
+	/* WLSW overrides bluetooth in firmware/hardware, reflect that */
+	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
+		return 0;
+
 	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
 		return -EIO;
 
@@ -2601,6 +2605,12 @@ static int bluetooth_set_radiosw(int radio_on)
 	if (!tp_features.bluetooth)
 		return -ENODEV;
 
+	/* WLSW overrides bluetooth in firmware/hardware, but there is no
+	 * reason to risk weird behaviour. */
+	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
+	    && radio_on)
+		return -EPERM;
+
 	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
 		return -EIO;
 	if (radio_on)
@@ -2760,6 +2770,10 @@ static int wan_get_radiosw(void)
 	if (!tp_features.wan)
 		return -ENODEV;
 
+	/* WLSW overrides WWAN in firmware/hardware, reflect that */
+	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
+		return 0;
+
 	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
 		return -EIO;
 
@@ -2773,6 +2787,12 @@ static int wan_set_radiosw(int radio_on)
 	if (!tp_features.wan)
 		return -ENODEV;
 
+	/* WLSW overrides bluetooth in firmware/hardware, but there is no
+	 * reason to risk weird behaviour. */
+	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
+	    && radio_on)
+		return -EPERM;
+
 	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
 		return -EIO;
 	if (radio_on)
-- 
cgit v1.2.3


From 0e74dc2646db04b644faa8ea10ff4f408d55cf90 Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Mon, 21 Jul 2008 09:15:51 -0300
Subject: ACPI: thinkpad-acpi: add bluetooth and WWAN rfkill support

Add a read/write rfkill interface to the bluetooth radio switch on the
bluetooth submodule, and one for the wireless wan radio switch to the wan
submodule.

Since rfkill does care for when a switch changes state, use WLSW
notifications to also check if the WWAN or Bluetooth switches did not
change state (due to them being slaves of WLSW in firmware/hardware, but
that reality not being always properly exported by the thinkpad firmware).

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ivo van Doorn <IvDoorn@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
---
 Documentation/laptops/thinkpad-acpi.txt |  22 +++-
 drivers/misc/Kconfig                    |   2 +
 drivers/misc/thinkpad_acpi.c            | 208 ++++++++++++++++++++++++++++----
 3 files changed, 200 insertions(+), 32 deletions(-)

diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 64b3f146e4b..1c1c0217ebd 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -621,7 +621,8 @@ Bluetooth
 ---------
 
 procfs: /proc/acpi/ibm/bluetooth
-sysfs device attribute: bluetooth_enable
+sysfs device attribute: bluetooth_enable (deprecated)
+sysfs rfkill class: switch "tpacpi_bluetooth_sw"
 
 This feature shows the presence and current state of a ThinkPad
 Bluetooth device in the internal ThinkPad CDC slot.
@@ -643,8 +644,12 @@ Sysfs notes:
 		0: disables Bluetooth / Bluetooth is disabled
 		1: enables Bluetooth / Bluetooth is enabled.
 
-	Note: this interface will be probably be superseded by the
-	generic rfkill class, so it is NOT to be considered stable yet.
+	Note: this interface has been superseded by the	generic rfkill
+	class.  It has been deprecated, and it will be removed in year
+	2010.
+
+	rfkill controller switch "tpacpi_bluetooth_sw": refer to
+	Documentation/rfkill.txt for details.
 
 Video output control -- /proc/acpi/ibm/video
 --------------------------------------------
@@ -1374,7 +1379,8 @@ EXPERIMENTAL: WAN
 -----------------
 
 procfs: /proc/acpi/ibm/wan
-sysfs device attribute: wwan_enable
+sysfs device attribute: wwan_enable (deprecated)
+sysfs rfkill class: switch "tpacpi_wwan_sw"
 
 This feature is marked EXPERIMENTAL because the implementation
 directly accesses hardware registers and may not work as expected. USE
@@ -1404,8 +1410,12 @@ Sysfs notes:
 		0: disables WWAN card / WWAN card is disabled
 		1: enables WWAN card / WWAN card is enabled.
 
-	Note: this interface will be probably be superseded by the
-	generic rfkill class, so it is NOT to be considered stable yet.
+	Note: this interface has been superseded by the	generic rfkill
+	class.  It has been deprecated, and it will be removed in year
+	2010.
+
+	rfkill controller switch "tpacpi_wwan_sw": refer to
+	Documentation/rfkill.txt for details.
 
 Multiple Commands, Module Parameters
 ------------------------------------
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 1921b8dbb24..b27ca91fd15 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -279,6 +279,8 @@ config THINKPAD_ACPI
 	select INPUT
 	select NEW_LEDS
 	select LEDS_CLASS
+	select NET
+	select RFKILL
 	---help---
 	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
 	  support for Fn-Fx key combinations, Bluetooth control, video
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 202d63e1b39..dc8d00a4570 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -68,6 +68,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/input.h>
 #include <linux/leds.h>
+#include <linux/rfkill.h>
 #include <asm/uaccess.h>
 
 #include <linux/dmi.h>
@@ -144,6 +145,12 @@ enum {
 
 #define TPACPI_MAX_ACPI_ARGS 3
 
+/* rfkill switches */
+enum {
+	TPACPI_RFK_BLUETOOTH_SW_ID = 0,
+	TPACPI_RFK_WWAN_SW_ID,
+};
+
 /* Debugging */
 #define TPACPI_LOG TPACPI_FILE ": "
 #define TPACPI_ERR	   KERN_ERR    TPACPI_LOG
@@ -905,6 +912,43 @@ static int __init tpacpi_check_std_acpi_brightness_support(void)
 	return 0;
 }
 
+static int __init tpacpi_new_rfkill(const unsigned int id,
+			struct rfkill **rfk,
+			const enum rfkill_type rfktype,
+			const char *name,
+			int (*toggle_radio)(void *, enum rfkill_state),
+			int (*get_state)(void *, enum rfkill_state *))
+{
+	int res;
+	enum rfkill_state initial_state;
+
+	*rfk = rfkill_allocate(&tpacpi_pdev->dev, rfktype);
+	if (!*rfk) {
+		printk(TPACPI_ERR
+			"failed to allocate memory for rfkill class\n");
+		return -ENOMEM;
+	}
+
+	(*rfk)->name = name;
+	(*rfk)->get_state = get_state;
+	(*rfk)->toggle_radio = toggle_radio;
+
+	if (!get_state(NULL, &initial_state))
+		(*rfk)->state = initial_state;
+
+	res = rfkill_register(*rfk);
+	if (res < 0) {
+		printk(TPACPI_ERR
+			"failed to register %s rfkill switch: %d\n",
+			name, res);
+		rfkill_free(*rfk);
+		*rfk = NULL;
+		return res;
+	}
+
+	return 0;
+}
+
 /*************************************************************************
  * thinkpad-acpi driver attributes
  */
@@ -1906,10 +1950,18 @@ static struct attribute *hotkey_mask_attributes[] __initdata = {
 	&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
 };
 
+static void bluetooth_update_rfk(void);
+static void wan_update_rfk(void);
 static void tpacpi_send_radiosw_update(void)
 {
 	int wlsw;
 
+	/* Sync these BEFORE sending any rfkill events */
+	if (tp_features.bluetooth)
+		bluetooth_update_rfk();
+	if (tp_features.wan)
+		wan_update_rfk();
+
 	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) {
 		mutex_lock(&tpacpi_inputdev_send_mutex);
 
@@ -2581,6 +2633,8 @@ enum {
 	TP_ACPI_BLUETOOTH_UNK		= 0x04,	/* unknown function */
 };
 
+static struct rfkill *tpacpi_bluetooth_rfkill;
+
 static int bluetooth_get_radiosw(void)
 {
 	int status;
@@ -2590,15 +2644,29 @@ static int bluetooth_get_radiosw(void)
 
 	/* WLSW overrides bluetooth in firmware/hardware, reflect that */
 	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
-		return 0;
+		return RFKILL_STATE_HARD_BLOCKED;
 
 	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
 		return -EIO;
 
-	return (status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0;
+	return ((status & TP_ACPI_BLUETOOTH_RADIOSSW) != 0) ?
+		RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
 }
 
-static int bluetooth_set_radiosw(int radio_on)
+static void bluetooth_update_rfk(void)
+{
+	int status;
+
+	if (!tpacpi_bluetooth_rfkill)
+		return;
+
+	status = bluetooth_get_radiosw();
+	if (status < 0)
+		return;
+	rfkill_force_state(tpacpi_bluetooth_rfkill, status);
+}
+
+static int bluetooth_set_radiosw(int radio_on, int update_rfk)
 {
 	int status;
 
@@ -2620,6 +2688,9 @@ static int bluetooth_set_radiosw(int radio_on)
 	if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
 		return -EIO;
 
+	if (update_rfk)
+		bluetooth_update_rfk();
+
 	return 0;
 }
 
@@ -2634,7 +2705,8 @@ static ssize_t bluetooth_enable_show(struct device *dev,
 	if (status < 0)
 		return status;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", status ? 1 : 0);
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			(status == RFKILL_STATE_UNBLOCKED) ? 1 : 0);
 }
 
 static ssize_t bluetooth_enable_store(struct device *dev,
@@ -2647,7 +2719,7 @@ static ssize_t bluetooth_enable_store(struct device *dev,
 	if (parse_strtoul(buf, 1, &t))
 		return -EINVAL;
 
-	res = bluetooth_set_radiosw(t);
+	res = bluetooth_set_radiosw(t, 1);
 
 	return (res) ? res : count;
 }
@@ -2667,8 +2739,27 @@ static const struct attribute_group bluetooth_attr_group = {
 	.attrs = bluetooth_attributes,
 };
 
+static int tpacpi_bluetooth_rfk_get(void *data, enum rfkill_state *state)
+{
+	int bts = bluetooth_get_radiosw();
+
+	if (bts < 0)
+		return bts;
+
+	*state = bts;
+	return 0;
+}
+
+static int tpacpi_bluetooth_rfk_set(void *data, enum rfkill_state state)
+{
+	return bluetooth_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
+}
+
 static void bluetooth_exit(void)
 {
+	if (tpacpi_bluetooth_rfkill)
+		rfkill_unregister(tpacpi_bluetooth_rfkill);
+
 	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
 			&bluetooth_attr_group);
 }
@@ -2699,14 +2790,26 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
 			   "bluetooth hardware not installed\n");
 	}
 
-	if (tp_features.bluetooth) {
-		res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+	if (!tp_features.bluetooth)
+		return 1;
+
+	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
 				&bluetooth_attr_group);
-		if (res)
-			return res;
+	if (res)
+		return res;
+
+	res = tpacpi_new_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID,
+				&tpacpi_bluetooth_rfkill,
+				RFKILL_TYPE_BLUETOOTH,
+				"tpacpi_bluetooth_sw",
+				tpacpi_bluetooth_rfk_set,
+				tpacpi_bluetooth_rfk_get);
+	if (res) {
+		bluetooth_exit();
+		return res;
 	}
 
-	return (tp_features.bluetooth)? 0 : 1;
+	return 0;
 }
 
 /* procfs -------------------------------------------------------------- */
@@ -2719,7 +2822,8 @@ static int bluetooth_read(char *p)
 		len += sprintf(p + len, "status:\t\tnot supported\n");
 	else {
 		len += sprintf(p + len, "status:\t\t%s\n",
-				(status)? "enabled" : "disabled");
+				(status == RFKILL_STATE_UNBLOCKED) ?
+					"enabled" : "disabled");
 		len += sprintf(p + len, "commands:\tenable, disable\n");
 	}
 
@@ -2735,9 +2839,9 @@ static int bluetooth_write(char *buf)
 
 	while ((cmd = next_cmd(&buf))) {
 		if (strlencmp(cmd, "enable") == 0) {
-			bluetooth_set_radiosw(1);
+			bluetooth_set_radiosw(1, 1);
 		} else if (strlencmp(cmd, "disable") == 0) {
-			bluetooth_set_radiosw(0);
+			bluetooth_set_radiosw(0, 1);
 		} else
 			return -EINVAL;
 	}
@@ -2763,6 +2867,8 @@ enum {
 	TP_ACPI_WANCARD_UNK		= 0x04,	/* unknown function */
 };
 
+static struct rfkill *tpacpi_wan_rfkill;
+
 static int wan_get_radiosw(void)
 {
 	int status;
@@ -2772,15 +2878,29 @@ static int wan_get_radiosw(void)
 
 	/* WLSW overrides WWAN in firmware/hardware, reflect that */
 	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
-		return 0;
+		return RFKILL_STATE_HARD_BLOCKED;
 
 	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
 		return -EIO;
 
-	return (status & TP_ACPI_WANCARD_RADIOSSW) != 0;
+	return ((status & TP_ACPI_WANCARD_RADIOSSW) != 0) ?
+		RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
 }
 
-static int wan_set_radiosw(int radio_on)
+static void wan_update_rfk(void)
+{
+	int status;
+
+	if (!tpacpi_wan_rfkill)
+		return;
+
+	status = wan_get_radiosw();
+	if (status < 0)
+		return;
+	rfkill_force_state(tpacpi_wan_rfkill, status);
+}
+
+static int wan_set_radiosw(int radio_on, int update_rfk)
 {
 	int status;
 
@@ -2802,6 +2922,9 @@ static int wan_set_radiosw(int radio_on)
 	if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
 		return -EIO;
 
+	if (update_rfk)
+		wan_update_rfk();
+
 	return 0;
 }
 
@@ -2816,7 +2939,8 @@ static ssize_t wan_enable_show(struct device *dev,
 	if (status < 0)
 		return status;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", status ? 1 : 0);
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			(status == RFKILL_STATE_UNBLOCKED) ? 1 : 0);
 }
 
 static ssize_t wan_enable_store(struct device *dev,
@@ -2829,7 +2953,7 @@ static ssize_t wan_enable_store(struct device *dev,
 	if (parse_strtoul(buf, 1, &t))
 		return -EINVAL;
 
-	res = wan_set_radiosw(t);
+	res = wan_set_radiosw(t, 1);
 
 	return (res) ? res : count;
 }
@@ -2849,8 +2973,27 @@ static const struct attribute_group wan_attr_group = {
 	.attrs = wan_attributes,
 };
 
+static int tpacpi_wan_rfk_get(void *data, enum rfkill_state *state)
+{
+	int wans = wan_get_radiosw();
+
+	if (wans < 0)
+		return wans;
+
+	*state = wans;
+	return 0;
+}
+
+static int tpacpi_wan_rfk_set(void *data, enum rfkill_state state)
+{
+	return wan_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
+}
+
 static void wan_exit(void)
 {
+	if (tpacpi_wan_rfkill)
+		rfkill_unregister(tpacpi_wan_rfkill);
+
 	sysfs_remove_group(&tpacpi_pdev->dev.kobj,
 		&wan_attr_group);
 }
@@ -2879,14 +3022,26 @@ static int __init wan_init(struct ibm_init_struct *iibm)
 			   "wan hardware not installed\n");
 	}
 
-	if (tp_features.wan) {
-		res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+	if (!tp_features.wan)
+		return 1;
+
+	res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
 				&wan_attr_group);
-		if (res)
-			return res;
+	if (res)
+		return res;
+
+	res = tpacpi_new_rfkill(TPACPI_RFK_WWAN_SW_ID,
+				&tpacpi_wan_rfkill,
+				RFKILL_TYPE_WWAN,
+				"tpacpi_wwan_sw",
+				tpacpi_wan_rfk_set,
+				tpacpi_wan_rfk_get);
+	if (res) {
+		wan_exit();
+		return res;
 	}
 
-	return (tp_features.wan)? 0 : 1;
+	return 0;
 }
 
 /* procfs -------------------------------------------------------------- */
@@ -2899,7 +3054,8 @@ static int wan_read(char *p)
 		len += sprintf(p + len, "status:\t\tnot supported\n");
 	else {
 		len += sprintf(p + len, "status:\t\t%s\n",
-				(status)? "enabled" : "disabled");
+				(status == RFKILL_STATE_UNBLOCKED) ?
+					"enabled" : "disabled");
 		len += sprintf(p + len, "commands:\tenable, disable\n");
 	}
 
@@ -2915,9 +3071,9 @@ static int wan_write(char *buf)
 
 	while ((cmd = next_cmd(&buf))) {
 		if (strlencmp(cmd, "enable") == 0) {
-			wan_set_radiosw(1);
+			wan_set_radiosw(1, 1);
 		} else if (strlencmp(cmd, "disable") == 0) {
-			wan_set_radiosw(0);
+			wan_set_radiosw(0, 1);
 		} else
 			return -EINVAL;
 	}
-- 
cgit v1.2.3


From 490673dc98adfc7de1703cc88508902bd10f446b Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Mon, 21 Jul 2008 09:15:51 -0300
Subject: ACPI: thinkpad-acpi: bump up version to 0.21

rfkill support deserves a new version checkpoint...

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
---
 Documentation/laptops/thinkpad-acpi.txt | 4 ++--
 drivers/misc/thinkpad_acpi.c            | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 1c1c0217ebd..02dc748b76c 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.20
-                          April 09th, 2008
+                            Version 0.21
+                           May 29th, 2008
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index dc8d00a4570..3eb01afe430 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -21,7 +21,7 @@
  *  02110-1301, USA.
  */
 
-#define TPACPI_VERSION "0.20"
+#define TPACPI_VERSION "0.21"
 #define TPACPI_SYSFS_VERSION 0x020200
 
 /*
-- 
cgit v1.2.3


From bf20e740a4bcc686de02e2fd1c1810a58872f46e Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Mon, 21 Jul 2008 09:15:51 -0300
Subject: ACPI: thinkpad-acpi: don't misdetect in get_thinkpad_model_data() on
 -ENOMEM

Explicitly check for memory allocation failures, and return status to
indicate that we could not collect data due to errors.

This lets the driver have a far more predictable failure mode on ENOMEM in
that codepath: it will refuse to load.  This is far better than trying to
proceed with missing data which is used to detect quirks, etc.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
---
 drivers/misc/thinkpad_acpi.c | 47 +++++++++++++++++++++++++++++++-------------
 1 file changed, 33 insertions(+), 14 deletions(-)

diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 3eb01afe430..d3eb7903c34 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -6340,13 +6340,18 @@ err_out:
 
 /* Probing */
 
-static void __init get_thinkpad_model_data(struct thinkpad_id_data *tp)
+/* returns 0 - probe ok, or < 0 - probe error.
+ * Probe ok doesn't mean thinkpad found.
+ * On error, kfree() cleanup on tp->* is not performed, caller must do it */
+static int __must_check __init get_thinkpad_model_data(
+						struct thinkpad_id_data *tp)
 {
 	const struct dmi_device *dev = NULL;
 	char ec_fw_string[18];
+	char const *s;
 
 	if (!tp)
-		return;
+		return -EINVAL;
 
 	memset(tp, 0, sizeof(*tp));
 
@@ -6355,12 +6360,14 @@ static void __init get_thinkpad_model_data(struct thinkpad_id_data *tp)
 	else if (dmi_name_in_vendors("LENOVO"))
 		tp->vendor = PCI_VENDOR_ID_LENOVO;
 	else
-		return;
+		return 0;
 
-	tp->bios_version_str = kstrdup(dmi_get_system_info(DMI_BIOS_VERSION),
-					GFP_KERNEL);
+	s = dmi_get_system_info(DMI_BIOS_VERSION);
+	tp->bios_version_str = kstrdup(s, GFP_KERNEL);
+	if (s && !tp->bios_version_str)
+		return -ENOMEM;
 	if (!tp->bios_version_str)
-		return;
+		return 0;
 	tp->bios_model = tp->bios_version_str[0]
 			 | (tp->bios_version_str[1] << 8);
 
@@ -6379,21 +6386,27 @@ static void __init get_thinkpad_model_data(struct thinkpad_id_data *tp)
 			ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
 
 			tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
+			if (!tp->ec_version_str)
+				return -ENOMEM;
 			tp->ec_model = ec_fw_string[0]
 					| (ec_fw_string[1] << 8);
 			break;
 		}
 	}
 
-	tp->model_str = kstrdup(dmi_get_system_info(DMI_PRODUCT_VERSION),
-					GFP_KERNEL);
-	if (tp->model_str && strnicmp(tp->model_str, "ThinkPad", 8) != 0) {
-		kfree(tp->model_str);
-		tp->model_str = NULL;
+	s = dmi_get_system_info(DMI_PRODUCT_VERSION);
+	if (s && !strnicmp(s, "ThinkPad", 8)) {
+		tp->model_str = kstrdup(s, GFP_KERNEL);
+		if (!tp->model_str)
+			return -ENOMEM;
 	}
 
-	tp->nummodel_str = kstrdup(dmi_get_system_info(DMI_PRODUCT_NAME),
-					GFP_KERNEL);
+	s = dmi_get_system_info(DMI_PRODUCT_NAME);
+	tp->nummodel_str = kstrdup(s, GFP_KERNEL);
+	if (s && !tp->nummodel_str)
+		return -ENOMEM;
+
+	return 0;
 }
 
 static int __init probe_for_thinkpad(void)
@@ -6656,7 +6669,13 @@ static int __init thinkpad_acpi_module_init(void)
 
 	/* Driver-level probe */
 
-	get_thinkpad_model_data(&thinkpad_id);
+	ret = get_thinkpad_model_data(&thinkpad_id);
+	if (ret) {
+		printk(TPACPI_ERR
+			"unable to get DMI data: %d\n", ret);
+		thinkpad_acpi_module_exit();
+		return ret;
+	}
 	ret = probe_for_thinkpad();
 	if (ret) {
 		thinkpad_acpi_module_exit();
-- 
cgit v1.2.3


From 5171c3047df9d5b5183b2b179aa797a5aed8369b Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 21 Jul 2008 21:58:34 +0200
Subject: x86: move the last Dprintk instance to pr_debug()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/mach-es7000/es7000plat.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c
index 4354ce80488..50189af14b8 100644
--- a/arch/x86/mach-es7000/es7000plat.c
+++ b/arch/x86/mach-es7000/es7000plat.c
@@ -130,10 +130,10 @@ parse_unisys_oem (char *oemptr)
 			mip_addr = val;
 			mip = (struct mip_reg *)val;
 			mip_reg = __va(mip);
-			Dprintk("es7000_mipcfg: host_reg = 0x%lx \n",
-				(unsigned long)host_reg);
-			Dprintk("es7000_mipcfg: mip_reg = 0x%lx \n",
-				(unsigned long)mip_reg);
+			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+				 (unsigned long)host_reg);
+			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+				 (unsigned long)mip_reg);
 			success++;
 			break;
 		case MIP_PSAI_REG:
-- 
cgit v1.2.3


From 74988bd85d1cb97987534fd7ffbc570e81145418 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 21 Jul 2008 13:17:38 -0700
Subject: sparc64: Do not define BIO_VMERGE_BOUNDARY.

The IOMMU code and the block layer can split things
up using different rules, so this can't work reliably.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/asm-sparc/io_64.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/asm-sparc/io_64.h b/include/asm-sparc/io_64.h
index f4907414b39..11daa31cdaf 100644
--- a/include/asm-sparc/io_64.h
+++ b/include/asm-sparc/io_64.h
@@ -16,7 +16,6 @@
 /* BIO layer definitions. */
 extern unsigned long kern_base, kern_size;
 #define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-#define BIO_VMERGE_BOUNDARY	8192
 
 static inline u8 _inb(unsigned long addr)
 {
-- 
cgit v1.2.3


From 3a33cc108d11fab2a2544e2601066ba4924736aa Mon Sep 17 00:00:00 2001
From: Ian Schram <ischram@telenet.be>
Date: Mon, 21 Jul 2008 13:19:35 -0700
Subject: mac80211_hwsim.c: fix: BUG: unable to handle kernel NULL pointer
 dereference at 0000000000000370

I was looking at this out of interest, but I'm in no way familiar with
the code.

Looks to me that the error handling code in mac80211_hwsim is awkward.
Which leads to it calling ieee80211_unregister_hw even when
ieee80211_register_hw failed.

The function has a for loop where it generates all simulated radios.
when something fails, the error handling will call mac80211_hwsim_free
which frees all simulated radios who's pointer isn't zero. However the
information stored is insufficient to determine whether or not the call
to ieee80211_register_hw succeeded or not for a specific radio. The
included patch makes init_mac80211_hwsim clean up the current simulated
radio, and then calls into mac80211_hwsim_free to clean up all the
radios that did succeed.

This however doesn't explain why the rate control registration failed..
build tested this, but had some problems reproducing the original
problem.

Signed-off-by: Ian Schram <ischram@telenet.be>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wireless/mac80211_hwsim.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 913dc9fe08f..5816230d58f 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -364,8 +364,7 @@ static void mac80211_hwsim_free(void)
 			struct mac80211_hwsim_data *data;
 			data = hwsim_radios[i]->priv;
 			ieee80211_unregister_hw(hwsim_radios[i]);
-			if (!IS_ERR(data->dev))
-				device_unregister(data->dev);
+			device_unregister(data->dev);
 			ieee80211_free_hw(hwsim_radios[i]);
 		}
 	}
@@ -437,7 +436,7 @@ static int __init init_mac80211_hwsim(void)
 			       "mac80211_hwsim: device_create_drvdata "
 			       "failed (%ld)\n", PTR_ERR(data->dev));
 			err = -ENOMEM;
-			goto failed;
+			goto failed_drvdata;
 		}
 		data->dev->driver = &mac80211_hwsim_driver;
 
@@ -461,7 +460,7 @@ static int __init init_mac80211_hwsim(void)
 		if (err < 0) {
 			printk(KERN_DEBUG "mac80211_hwsim: "
 			       "ieee80211_register_hw failed (%d)\n", err);
-			goto failed;
+			goto failed_hw;
 		}
 
 		printk(KERN_DEBUG "%s: hwaddr %s registered\n",
@@ -479,9 +478,9 @@ static int __init init_mac80211_hwsim(void)
 	rtnl_lock();
 
 	err = dev_alloc_name(hwsim_mon, hwsim_mon->name);
-	if (err < 0) {
+	if (err < 0)
 		goto failed_mon;
-	}
+
 
 	err = register_netdevice(hwsim_mon);
 	if (err < 0)
@@ -494,7 +493,14 @@ static int __init init_mac80211_hwsim(void)
 failed_mon:
 	rtnl_unlock();
 	free_netdev(hwsim_mon);
+	mac80211_hwsim_free();
+	return err;
 
+failed_hw:
+	device_unregister(data->dev);
+failed_drvdata:
+	ieee80211_free_hw(hw);
+	hwsim_radios[i] = 0;
 failed:
 	mac80211_hwsim_free();
 	return err;
-- 
cgit v1.2.3


From 847499ce71bdcc8fc542062df6ebed3e596608dd Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Mon, 21 Jul 2008 13:21:35 -0700
Subject: ipv6: use timer pending

This fixes the bridge reference count problem and cleanups ipv6 FIB
timer management.  Don't use expires field, because it is not a proper
way to test, instead use timer_pending().

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/ip6_fib.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 4de2b9efcac..944095cf5e3 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -661,17 +661,17 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct rt6_info *rt,
 
 static __inline__ void fib6_start_gc(struct net *net, struct rt6_info *rt)
 {
-	if (net->ipv6.ip6_fib_timer->expires == 0 &&
+	if (!timer_pending(net->ipv6.ip6_fib_timer) &&
 	    (rt->rt6i_flags & (RTF_EXPIRES|RTF_CACHE)))
-		mod_timer(net->ipv6.ip6_fib_timer, jiffies +
-			  net->ipv6.sysctl.ip6_rt_gc_interval);
+		mod_timer(net->ipv6.ip6_fib_timer,
+			  jiffies + net->ipv6.sysctl.ip6_rt_gc_interval);
 }
 
 void fib6_force_start_gc(struct net *net)
 {
-	if (net->ipv6.ip6_fib_timer->expires == 0)
-		mod_timer(net->ipv6.ip6_fib_timer, jiffies +
-			  net->ipv6.sysctl.ip6_rt_gc_interval);
+	if (!timer_pending(net->ipv6.ip6_fib_timer))
+		mod_timer(net->ipv6.ip6_fib_timer,
+			  jiffies + net->ipv6.sysctl.ip6_rt_gc_interval);
 }
 
 /*
-- 
cgit v1.2.3


From 7943986ca1138ac99597b1aa4dc893012dcfdc08 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Mon, 21 Jul 2008 13:28:44 -0700
Subject: net: use kcalloc in netdev_queue alloc

Minor nit, use size_t for allocation size and kcalloc to allocate
an array. Probably makes no actual code difference.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index cbc34c0db37..1698b399898 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4207,7 +4207,7 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 {
 	struct netdev_queue *tx;
 	struct net_device *dev;
-	int alloc_size;
+	size_t alloc_size;
 	void *p;
 
 	BUG_ON(strlen(name) >= sizeof(dev->name));
@@ -4227,7 +4227,7 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 		return NULL;
 	}
 
-	tx = kzalloc(sizeof(struct netdev_queue) * queue_count, GFP_KERNEL);
+	tx = kcalloc(queue_count, sizeof(struct netdev_queue), GFP_KERNEL);
 	if (!tx) {
 		printk(KERN_ERR "alloc_netdev: Unable to allocate "
 		       "tx qdiscs.\n");
-- 
cgit v1.2.3


From 6579e57b31d79d31d9b806e41ba48774e73257dc Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Mon, 21 Jul 2008 13:31:48 -0700
Subject: net: Print the module name as part of the watchdog message

As suggested by Dave:

This patch adds a function to get the driver name from a struct net_device,
and consequently uses this in the watchdog timeout handler to print as
part of the message.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h |  2 ++
 net/core/dev.c            | 20 ++++++++++++++++++++
 net/sched/sch_generic.c   |  6 +++---
 3 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 812bcd8b436..f5ea445f89f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1645,6 +1645,8 @@ extern void dev_seq_stop(struct seq_file *seq, void *v);
 extern int netdev_class_create_file(struct class_attribute *class_attr);
 extern void netdev_class_remove_file(struct class_attribute *class_attr);
 
+extern char *netdev_drivername(struct net_device *dev, char *buffer, int len);
+
 extern void linkwatch_run_queue(void);
 
 extern int netdev_compute_features(unsigned long all, unsigned long one);
diff --git a/net/core/dev.c b/net/core/dev.c
index 1698b399898..ad5598d2bb3 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4686,6 +4686,26 @@ err_name:
 	return -ENOMEM;
 }
 
+char *netdev_drivername(struct net_device *dev, char *buffer, int len)
+{
+	struct device_driver *driver;
+	struct device *parent;
+
+	if (len <= 0 || !buffer)
+		return buffer;
+	buffer[0] = 0;
+
+	parent = dev->dev.parent;
+
+	if (!parent)
+		return buffer;
+
+	driver = parent->driver;
+	if (driver && driver->name)
+		strlcpy(buffer, driver->name, len);
+	return buffer;
+}
+
 static void __net_exit netdev_exit(struct net *net)
 {
 	kfree(net->dev_name_head);
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index cb625b4d6da..4ac7e3a8c25 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -212,9 +212,9 @@ static void dev_watchdog(unsigned long arg)
 			if (some_queue_stopped &&
 			    time_after(jiffies, (dev->trans_start +
 						 dev->watchdog_timeo))) {
-				printk(KERN_INFO "NETDEV WATCHDOG: %s: "
-				       "transmit timed out\n",
-				       dev->name);
+				char drivername[64];
+				printk(KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
+				       dev->name, netdev_drivername(dev, drivername, 64));
 				dev->tx_timeout(dev);
 				WARN_ON_ONCE(1);
 			}
-- 
cgit v1.2.3


From 47112e25da41d9059626033986dc3353e101f815 Mon Sep 17 00:00:00 2001
From: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Date: Mon, 21 Jul 2008 13:35:08 -0700
Subject: udplite: Protection against coverage value wrap-around

This patch clamps the cscov setsockopt values to a maximum of 0xFFFF.

Setsockopt values greater than 0xffff can cause an unwanted
wrap-around.  Further, IPv6 jumbograms are not supported (RFC 3838,
3.5), so that values greater than 0xffff are not even useful.

Further changes: fixed a typo in the documentation.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 Documentation/networking/udplite.txt | 2 +-
 net/ipv4/udp.c                       | 4 ++++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/networking/udplite.txt b/Documentation/networking/udplite.txt
index 3870f280280..855d8da57a2 100644
--- a/Documentation/networking/udplite.txt
+++ b/Documentation/networking/udplite.txt
@@ -148,7 +148,7 @@
         getsockopt(sockfd, SOL_SOCKET, SO_NO_CHECK, &value, ...);
 
   is meaningless (as in TCP). Packets with a zero checksum field are
-  illegal (cf. RFC 3828, sec. 3.1) will be silently discarded.
+  illegal (cf. RFC 3828, sec. 3.1) and will be silently discarded.
 
   4) Fragmentation
 
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index a751770947a..383d17359d0 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1325,6 +1325,8 @@ int udp_lib_setsockopt(struct sock *sk, int level, int optname,
 			return -ENOPROTOOPT;
 		if (val != 0 && val < 8) /* Illegal coverage: use default (8) */
 			val = 8;
+		else if (val > USHORT_MAX)
+			val = USHORT_MAX;
 		up->pcslen = val;
 		up->pcflag |= UDPLITE_SEND_CC;
 		break;
@@ -1337,6 +1339,8 @@ int udp_lib_setsockopt(struct sock *sk, int level, int optname,
 			return -ENOPROTOOPT;
 		if (val != 0 && val < 8) /* Avoid silly minimal values.       */
 			val = 8;
+		else if (val > USHORT_MAX)
+			val = USHORT_MAX;
 		up->pcrlen = val;
 		up->pcflag |= UDPLITE_RECV_CC;
 		break;
-- 
cgit v1.2.3


From ebb36a978131810c98e7198b1187090c697cf99f Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 21 Jul 2008 13:41:16 -0700
Subject: ipv6: __KERNEL__ ifdef struct ipv6_devconf

Based upon a report by Olaf Hering.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/ipv6.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 391ad0843a4..641e026eee8 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -123,6 +123,7 @@ struct ipv6hdr {
 	struct	in6_addr	daddr;
 };
 
+#ifdef __KERNEL__
 /*
  * This structure contains configuration options per IPv6 link.
  */
@@ -167,6 +168,7 @@ struct ipv6_devconf {
 	__s32		accept_dad;
 	void		*sysctl;
 };
+#endif
 
 /* index values for the variables in ipv6_devconf */
 enum {
-- 
cgit v1.2.3


From f88133d76ea38761b7379d6233b752ed82250a4a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 21 Jul 2008 15:57:45 +0200
Subject: acpi: fix crash in core ACPI code, triggered by
 CONFIG_ACPI_PCI_SLOT=y

-tip testing found the following boot crash on 32-bit x86 (Core2Duo
laptop) yesterday:

[    5.606664] scsi4 : ata_piix
[    5.606664] scsi5 : ata_piix
[    5.606664] ACPI Error (psargs-0358): [\_SB_.PCI0.LPC_.EC__.BSTA] Namespace lookup failure, AE_NOT_FOUND
[    5.606664] ACPI Error (psparse-0530): ACPI Error (nsnames-0186): Invalid NS Node (f7c0e960) while traversing path [20080609]
[    5.606664] BUG: unable to handle kernel NULL pointer dereference at 0000000f
[    5.606664] IP: [<80339e2f>] acpi_ns_build_external_path+0x1f/0x80
[    5.609997] *pdpt = 0000000000a03001 *pde = 0000000000000000
[    5.609997] Oops: 0002 [#1] SMP
[    5.609997]
[    5.609997] Pid: 1, comm: swapper Not tainted (2.6.26-tip-03965-gbbfb62e-dirty #3153)
[    5.609997] EIP: 0060:[<80339e2f>] EFLAGS: 00010286 CPU: 0
[    5.609997] EIP is at acpi_ns_build_external_path+0x1f/0x80
[    5.609997] EAX: f7c18c18 EBX: ffffffff ECX: 00000010 EDX: 00000000
[    5.609997] ESI: f7c18c18 EDI: 00000010 EBP: f7c4dc28 ESP: f7c4dc18
[    5.609997]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    5.609997] Process swapper (pid: 1, ti=f7c4c000 task=f7c50000 task.ti=f7c4c000)
[    5.609997] Stack: 00000000 00000000 f7c18c18 f7c4dc48 f7c4dc40 80339ed0 00000000 f7c18c18
[    5.609997]        8084c1b6 8084c1b6 f7c4dc58 8033a60a 00000000 00000010 00000000 f7c18c18
[    5.609997]        f7c4dc70 8033a68f f7c18c18 00000000 f6de7600 00000005 f7c4dc98 8033c34d
[    5.609997] Call Trace:
[    5.609997]  [<80339ed0>] ? acpi_ns_handle_to_pathname+0x40/0x72
[    5.609997]  [<8033a60a>] ? acpi_ns_print_node_pathname+0x2c/0x61
[    5.609997]  [<8033a68f>] ? acpi_ns_report_method_error+0x50/0x6d
[    5.609997]  [<8033c34d>] ? acpi_ps_parse_aml+0x149/0x2f9
[    5.609997]  [<8033d6dd>] ? acpi_ps_execute_method+0x132/0x201
[    5.609997]  [<80339d19>] ? acpi_ns_evaluate+0x1ad/0x258
[    5.609997]  [<803406c4>] ? acpi_ut_evaluate_object+0x55/0x18f
[    5.609997]  [<803408b7>] ? acpi_ut_execute_STA+0x22/0x7a
[    5.609997]  [<8033a907>] ? acpi_get_object_info+0x131/0x1be
[    5.609997]  [<80344bb2>] ? do_acpi_find_child+0x22/0x4b
[    5.609997]  [<8033b855>] ? acpi_ns_walk_namespace+0xa5/0x124
[    5.609997]  [<803394f3>] ? acpi_walk_namespace+0x54/0x74
[    5.609997]  [<80344b90>] ? do_acpi_find_child+0x0/0x4b
[    5.609997]  [<80344b85>] ? acpi_get_child+0x38/0x43
[    5.609997]  [<80344b90>] ? do_acpi_find_child+0x0/0x4b
[    5.609997]  [<804d0148>] ? ata_acpi_associate+0xb5/0x1b5
[    5.609997]  [<804c6ecb>] ? ata_scsi_add_hosts+0x8e/0xdc
[    5.609997]  [<804c40c8>] ? ata_host_register+0x9f/0x1d6
[    5.609997]  [<804cbc7f>] ? ata_pci_sff_activate_host+0x179/0x19f
[    5.609997]  [<804cdd45>] ? ata_sff_interrupt+0x0/0x1c7
[    5.609997]  [<8069b033>] ? piix_init_one+0x569/0x5b0
[    5.609997]  [<801bd400>] ? sysfs_ilookup_test+0x0/0x11
[    5.609997]  [<801987d7>] ? ilookup5_nowait+0x29/0x30
[    5.609997]  [<802efc7e>] ? pci_match_device+0x99/0xa3
[    5.609997]  [<802efd3c>] ? pci_device_probe+0x39/0x59
[    5.609997]  [<803bc4af>] ? driver_probe_device+0xa0/0x11b
[    5.609997]  [<803bc564>] ? __driver_attach+0x3a/0x59
[    5.609997]  [<803bbde3>] ? bus_for_each_dev+0x36/0x58
[    5.609997]  [<803bc354>] ? driver_attach+0x14/0x16
[    5.609997]  [<803bc52a>] ? __driver_attach+0x0/0x59
[    5.609997]  [<803bc161>] ? bus_add_driver+0x93/0x196
[    5.609997]  [<803bc773>] ? driver_register+0x71/0xcd
[    5.609997]  [<802eff05>] ? __pci_register_driver+0x3f/0x6e
[    5.609997]  [<809af7ff>] ? piix_init+0x14/0x24
[    5.609997]  [<80984568>] ? kernel_init+0x128/0x269
[    5.609997]  [<809af7eb>] ? piix_init+0x0/0x24
[    5.609997]  [<802e2758>] ? trace_hardirqs_on_thunk+0xc/0x10
[    5.609997]  [<80116aef>] ? restore_nocheck_notrace+0x0/0xe
[    5.609997]  [<80984440>] ? kernel_init+0x0/0x269
[    5.609997]  [<80984440>] ? kernel_init+0x0/0x269
[    5.609997]  [<80117d87>] ? kernel_thread_helper+0x7/0x10
[    5.609997]  =======================
[    5.609997] Code: 75 02 b3 01 8d 43 01 8b 5d fc c9 c3 55 89 e5 57 89 cf 56 53 89 d3 4b 83 ec 04 83 fb 03 89 55 f0 77 09 c6 01 5c c6 41 01 00 eb 59 <c6> 04 19 00 8b 55 f0 8d 34 11 89 c2 eb 19 8b 42 08 83 eb 05 89
[    5.609997] EIP: [<80339e2f>] acpi_ns_build_external_path+0x1f/0x80 SS:ESP 0068:f7c4dc18
[    5.613331] Kernel panic - not syncing: Fatal exception
[    5.613331] Rebooting in 1 seconds..[    4.646664] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

I have bisected it down to:

 # bad:  [5b664cbe] Merge branch 'upstream-linus' of git://git.kernel.
 # good: [bce7f795] Linux 2.6.26
 # good: [e18425ab] Merge branch 'tracing/for-linus' of git://git.kern
 # good: [cadc7236] Merge branch 'bkl-removal' into next
 # good: [4515889a] Merge branch 'merge' of git://git.kernel.org/pub/s
 # good: [42fdd14e] Merge git://git.kernel.org/pub/scm/linux/kernel/gi
 # good: [8a0ca91f] Merge branch 'for-linus' of git://git.kernel.org/p
 # bad:  [0af4b8cb] ACPI: Introduce new device wakeup flag 'prepared'
 # good: [fe997407] PCI: construct one fakephp slot per PCI slot
 # bad:  [531f254a] PCIE: aer: use dev_printk when possible
 # bad:  [15650a20] x86/PCI: fixup early quirk probing
 # good: [0e6859d9] ACPI PM: Remove obsolete Toshiba workaround
 # bad:  [8344b566] PCI: ACPI PCI slot detection driver
 # good: [f46753c9] PCI: introduce pci_slot

 | 8344b568f5bdc7ee1bba909de3294c6348c36056 is first bad commit
 | commit 8344b568f5bdc7ee1bba909de3294c6348c36056
 | Author: Alex Chiang <achiang@hp.com>
 | Date:   Tue Jun 10 15:30:42 2008 -0600
 |
 |     PCI: ACPI PCI slot detection driver
 |
 |     Detect all physical PCI slots as described by ACPI, and create entries in
 |     /sys/bus/pci/slots/.

I.e. the new CONFIG_ACPI_PCI_SLOT=y option was causing this crash.

But the bug is not mainly in this new PCI code - that code was just
hitting the ACPI code in a new way which made ACPI break.

The crash signature shows that we are crashing on this instruction:

   movb $0x0, (%ecx, %ebx, 1)

ECX and EBX are 0x10 and -1. It's this line in
drivers/acpi/namespace/nsnames.c's acpi_ns_build_external_path():

        name_buffer[index] = 0;

I.e. name_buffer is 0x10 and index is -1.

index -1 corresponds to size 0, and name_buffer 0x10 is slab's
ZERO_SIZE_PTR special-case for zero-sized allocations.

I.e. when we called acpi_ns_handle_to_pathname(), we got required_size
of 0 due to an error condition, but this is passed to the ACPI allocator
unconditionally:

        required_size = acpi_ns_get_pathname_length(node);

        /* Validate/Allocate/Clear caller buffer */

        status = acpi_ut_initialize_buffer(buffer, required_size);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

Where acpi_ut_initialize_buffer(), through many (unnecessary) layers,
ends up calling kzalloc(0). Which returns 0x10 and that then causes the
crash later on.

So fix both callers of acpi_ns_get_pathname_length(), which can return 0
in case of an invalid node.

Also add a WARN_ON() against zero sized allocations in
acpi_ut_initialize_buffer() to make it easier to find similar instances
of this bug.

I have tested this patch for the past 24 hours and the crash has not
reappeared.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/namespace/nsnames.c | 8 ++++++++
 drivers/acpi/utilities/utalloc.c | 4 ++++
 2 files changed, 12 insertions(+)

diff --git a/drivers/acpi/namespace/nsnames.c b/drivers/acpi/namespace/nsnames.c
index cffef1bcbdb..549db42f16c 100644
--- a/drivers/acpi/namespace/nsnames.c
+++ b/drivers/acpi/namespace/nsnames.c
@@ -137,6 +137,10 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 	/* Calculate required buffer size based on depth below root */
 
 	size = acpi_ns_get_pathname_length(node);
+	if (!size) {
+		ACPI_ERROR((AE_INFO, "Invalid node failure"));
+		return_PTR(NULL);
+	}
 
 	/* Allocate a buffer to be returned to caller */
 
@@ -229,6 +233,10 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 	/* Determine size required for the caller buffer */
 
 	required_size = acpi_ns_get_pathname_length(node);
+	if (!required_size) {
+		ACPI_ERROR((AE_INFO, "Invalid node failure"));
+		return_ACPI_STATUS(AE_ERROR);
+	}
 
 	/* Validate/Allocate/Clear caller buffer */
 
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
index 3dfb8a442b2..e7bf34a7b1d 100644
--- a/drivers/acpi/utilities/utalloc.c
+++ b/drivers/acpi/utilities/utalloc.c
@@ -242,6 +242,10 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer,
 {
 	acpi_status status = AE_OK;
 
+	if (!required_length) {
+		WARN_ON(1);
+		return AE_ERROR;
+	}
 	switch (buffer->length) {
 	case ACPI_NO_BUFFER:
 
-- 
cgit v1.2.3


From 28c10af712d875f85c3b8f70aa7a47b77be0f27d Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 21 Jul 2008 16:49:34 -0700
Subject: ide: <asm-sparc/ide_64.h>: use %r0 for outw_be()

Use %r0 for outw_be() to make it match __raw_writew().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/asm-sparc/ide_64.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/asm-sparc/ide_64.h b/include/asm-sparc/ide_64.h
index 1282676da1c..27921ccb3a1 100644
--- a/include/asm-sparc/ide_64.h
+++ b/include/asm-sparc/ide_64.h
@@ -78,9 +78,9 @@ static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
 
 static inline void outw_be(unsigned short w, void __iomem *addr)
 {
-	__asm__ __volatile__("stha %0, [%1] %2"
+	__asm__ __volatile__("stha %r0, [%1] %2"
 			     : /* no outputs */
-			     : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
 }
 
 static inline void __ide_outsw(void __iomem *port, void *src, u32 count)
-- 
cgit v1.2.3


From 8fbf3f30fe0700eff01d6ff8d058cd6f47d4da1b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 21 Jul 2008 16:50:56 -0700
Subject: ide: <asm-sparc/ide_32.h>: use __raw_{read,write}w()

Use __raw_{read,write}w() in __ide_{in,out}sw().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/asm-sparc/ide_32.h | 30 ++++++++++--------------------
 1 file changed, 10 insertions(+), 20 deletions(-)

diff --git a/include/asm-sparc/ide_32.h b/include/asm-sparc/ide_32.h
index afd1736ed48..81a00b60bcc 100644
--- a/include/asm-sparc/ide_32.h
+++ b/include/asm-sparc/ide_32.h
@@ -28,50 +28,40 @@
 #define __ide_mm_outsw	__ide_outsw
 #define __ide_mm_outsl	__ide_outsl
 
-static inline void __ide_insw(unsigned long port,
-				  void *dst,
-				  unsigned long count)
+static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
 {
-	volatile unsigned short *data_port;
 	/* unsigned long end = (unsigned long)dst + (count << 1); */ /* P3 */
 	u16 *ps = dst;
 	u32 *pi;
 
-	data_port = (volatile unsigned short *)port;
-
 	if(((unsigned long)ps) & 0x2) {
-		*ps++ = *data_port;
+		*ps++ = __raw_readw(port);
 		count--;
 	}
 	pi = (u32 *)ps;
 	while(count >= 2) {
 		u32 w;
 
-		w  = (*data_port) << 16;
-		w |= (*data_port);
+		w  = __raw_readw(port) << 16;
+		w |= __raw_readw(port);
 		*pi++ = w;
 		count -= 2;
 	}
 	ps = (u16 *)pi;
 	if(count)
-		*ps++ = *data_port;
+		*ps++ = __raw_readw(port);
 
 	/* __flush_dcache_range((unsigned long)dst, end); */ /* P3 see hme */
 }
 
-static inline void __ide_outsw(unsigned long port,
-				   const void *src,
-				   unsigned long count)
+static inline void __ide_outsw(void __iomem *port, const void *src, u32 count)
 {
-	volatile unsigned short *data_port;
 	/* unsigned long end = (unsigned long)src + (count << 1); */
 	const u16 *ps = src;
 	const u32 *pi;
 
-	data_port = (volatile unsigned short *)port;
-
 	if(((unsigned long)src) & 0x2) {
-		*data_port = *ps++;
+		__raw_writew(*ps++, port);
 		count--;
 	}
 	pi = (const u32 *)ps;
@@ -79,13 +69,13 @@ static inline void __ide_outsw(unsigned long port,
 		u32 w;
 
 		w = *pi++;
-		*data_port = (w >> 16);
-		*data_port = w;
+		__raw_writew((w >> 16), port);
+		__raw_writew(w, port);
 		count -= 2;
 	}
 	ps = (const u16 *)pi;
 	if(count)
-		*data_port = *ps;
+		__raw_writew(*ps, port);
 
 	/* __flush_dcache_range((unsigned long)src, end); */ /* P3 see hme */
 }
-- 
cgit v1.2.3


From edc83d4f3e971b322c557604d064b68374a7b77b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 21 Jul 2008 16:51:43 -0700
Subject: ide: <asm-sparc/ide_64.h>: use __raw_{read,write}w()

Use __raw_{read,write}w() in __ide_{in,out}sw()
and remove no longer needed {in,out}w_be().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/asm-sparc/ide_64.h | 34 ++++++++--------------------------
 1 file changed, 8 insertions(+), 26 deletions(-)

diff --git a/include/asm-sparc/ide_64.h b/include/asm-sparc/ide_64.h
index 27921ccb3a1..99eee9b0ba2 100644
--- a/include/asm-sparc/ide_64.h
+++ b/include/asm-sparc/ide_64.h
@@ -35,17 +35,6 @@
 #define __ide_mm_outsw	__ide_outsw
 #define __ide_mm_outsl	__ide_outsl
 
-static inline unsigned int inw_be(void __iomem *addr)
-{
-	unsigned int ret;
-
-	__asm__ __volatile__("lduha [%1] %2, %0"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
 static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
 {
 #ifdef DCACHE_ALIASING_POSSIBLE
@@ -55,34 +44,27 @@ static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
 	u32 *pi;
 
 	if(((u64)ps) & 0x2) {
-		*ps++ = inw_be(port);
+		*ps++ = __raw_readw(port);
 		count--;
 	}
 	pi = (u32 *)ps;
 	while(count >= 2) {
 		u32 w;
 
-		w  = inw_be(port) << 16;
-		w |= inw_be(port);
+		w  = __raw_readw(port) << 16;
+		w |= __raw_readw(port);
 		*pi++ = w;
 		count -= 2;
 	}
 	ps = (u16 *)pi;
 	if(count)
-		*ps++ = inw_be(port);
+		*ps++ = __raw_readw(port);
 
 #ifdef DCACHE_ALIASING_POSSIBLE
 	__flush_dcache_range((unsigned long)dst, end);
 #endif
 }
 
-static inline void outw_be(unsigned short w, void __iomem *addr)
-{
-	__asm__ __volatile__("stha %r0, [%1] %2"
-			     : /* no outputs */
-			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
 static inline void __ide_outsw(void __iomem *port, void *src, u32 count)
 {
 #ifdef DCACHE_ALIASING_POSSIBLE
@@ -92,7 +74,7 @@ static inline void __ide_outsw(void __iomem *port, void *src, u32 count)
 	const u32 *pi;
 
 	if(((u64)src) & 0x2) {
-		outw_be(*ps++, port);
+		__raw_writew(*ps++, port);
 		count--;
 	}
 	pi = (const u32 *)ps;
@@ -100,13 +82,13 @@ static inline void __ide_outsw(void __iomem *port, void *src, u32 count)
 		u32 w;
 
 		w = *pi++;
-		outw_be((w >> 16), port);
-		outw_be(w, port);
+		__raw_writew((w >> 16), port);
+		__raw_writew(w, port);
 		count -= 2;
 	}
 	ps = (const u16 *)pi;
 	if(count)
-		outw_be(*ps, port);
+		__raw_writew(*ps, port);
 
 #ifdef DCACHE_ALIASING_POSSIBLE
 	__flush_dcache_range((unsigned long)src, end);
-- 
cgit v1.2.3


From 6662327e190a20bd42867f11abca095badee56e1 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 21 Jul 2008 16:55:11 -0700
Subject: ide: merge <asm-sparc/ide_64.h> with <asm-sparc/ide_32.h>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/asm-sparc/ide.h    | 102 ++++++++++++++++++++++++++++++++++++++++++---
 include/asm-sparc/ide_32.h |  85 -------------------------------------
 include/asm-sparc/ide_64.h | 100 --------------------------------------------
 3 files changed, 97 insertions(+), 190 deletions(-)
 delete mode 100644 include/asm-sparc/ide_32.h
 delete mode 100644 include/asm-sparc/ide_64.h

diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h
index a3c7f5ff270..879fcec72dc 100644
--- a/include/asm-sparc/ide.h
+++ b/include/asm-sparc/ide.h
@@ -1,8 +1,100 @@
-#ifndef ___ASM_SPARC_IDE_H
-#define ___ASM_SPARC_IDE_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/ide_64.h>
+/* ide.h: SPARC PCI specific IDE glue.
+ *
+ * Copyright (C) 1997  David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
+ * Adaptation from sparc64 version to sparc by Pete Zaitcev.
+ */
+
+#ifndef _SPARC_IDE_H
+#define _SPARC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+#ifdef CONFIG_SPARC64
+#include <asm/pgalloc.h>
+#include <asm/spitfire.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
 #else
-#include <asm-sparc/ide_32.h>
+#include <asm/pgtable.h>
+#include <asm/psr.h>
 #endif
+
+#undef  MAX_HWIFS
+#define MAX_HWIFS	2
+
+#define __ide_insl(data_reg, buffer, wcount) \
+	__ide_insw(data_reg, buffer, (wcount)<<1)
+#define __ide_outsl(data_reg, buffer, wcount) \
+	__ide_outsw(data_reg, buffer, (wcount)<<1)
+
+/* On sparc, I/O ports and MMIO registers are accessed identically.  */
+#define __ide_mm_insw	__ide_insw
+#define __ide_mm_insl	__ide_insl
+#define __ide_mm_outsw	__ide_outsw
+#define __ide_mm_outsl	__ide_outsl
+
+static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	unsigned long end = (unsigned long)dst + (count << 1);
 #endif
+	u16 *ps = dst;
+	u32 *pi;
+
+	if(((unsigned long)ps) & 0x2) {
+		*ps++ = __raw_readw(port);
+		count--;
+	}
+	pi = (u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w  = __raw_readw(port) << 16;
+		w |= __raw_readw(port);
+		*pi++ = w;
+		count -= 2;
+	}
+	ps = (u16 *)pi;
+	if(count)
+		*ps++ = __raw_readw(port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	__flush_dcache_range((unsigned long)dst, end);
+#endif
+}
+
+static inline void __ide_outsw(void __iomem *port, const void *src, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	unsigned long end = (unsigned long)src + (count << 1);
+#endif
+	const u16 *ps = src;
+	const u32 *pi;
+
+	if(((unsigned long)src) & 0x2) {
+		__raw_writew(*ps++, port);
+		count--;
+	}
+	pi = (const u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w = *pi++;
+		__raw_writew((w >> 16), port);
+		__raw_writew(w, port);
+		count -= 2;
+	}
+	ps = (const u16 *)pi;
+	if(count)
+		__raw_writew(*ps, port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	__flush_dcache_range((unsigned long)src, end);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_IDE_H */
diff --git a/include/asm-sparc/ide_32.h b/include/asm-sparc/ide_32.h
deleted file mode 100644
index 81a00b60bcc..00000000000
--- a/include/asm-sparc/ide_32.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* ide.h: SPARC PCI specific IDE glue.
- *
- * Copyright (C) 1997  David S. Miller (davem@davemloft.net)
- * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
- * Adaptation from sparc64 version to sparc by Pete Zaitcev.
- */
-
-#ifndef _SPARC_IDE_H
-#define _SPARC_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/psr.h>
-
-#undef  MAX_HWIFS
-#define MAX_HWIFS	2
-
-#define __ide_insl(data_reg, buffer, wcount) \
-	__ide_insw(data_reg, buffer, (wcount)<<1)
-#define __ide_outsl(data_reg, buffer, wcount) \
-	__ide_outsw(data_reg, buffer, (wcount)<<1)
-
-/* On sparc, I/O ports and MMIO registers are accessed identically.  */
-#define __ide_mm_insw	__ide_insw
-#define __ide_mm_insl	__ide_insl
-#define __ide_mm_outsw	__ide_outsw
-#define __ide_mm_outsl	__ide_outsl
-
-static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
-{
-	/* unsigned long end = (unsigned long)dst + (count << 1); */ /* P3 */
-	u16 *ps = dst;
-	u32 *pi;
-
-	if(((unsigned long)ps) & 0x2) {
-		*ps++ = __raw_readw(port);
-		count--;
-	}
-	pi = (u32 *)ps;
-	while(count >= 2) {
-		u32 w;
-
-		w  = __raw_readw(port) << 16;
-		w |= __raw_readw(port);
-		*pi++ = w;
-		count -= 2;
-	}
-	ps = (u16 *)pi;
-	if(count)
-		*ps++ = __raw_readw(port);
-
-	/* __flush_dcache_range((unsigned long)dst, end); */ /* P3 see hme */
-}
-
-static inline void __ide_outsw(void __iomem *port, const void *src, u32 count)
-{
-	/* unsigned long end = (unsigned long)src + (count << 1); */
-	const u16 *ps = src;
-	const u32 *pi;
-
-	if(((unsigned long)src) & 0x2) {
-		__raw_writew(*ps++, port);
-		count--;
-	}
-	pi = (const u32 *)ps;
-	while(count >= 2) {
-		u32 w;
-
-		w = *pi++;
-		__raw_writew((w >> 16), port);
-		__raw_writew(w, port);
-		count -= 2;
-	}
-	ps = (const u16 *)pi;
-	if(count)
-		__raw_writew(*ps, port);
-
-	/* __flush_dcache_range((unsigned long)src, end); */ /* P3 see hme */
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _SPARC_IDE_H */
diff --git a/include/asm-sparc/ide_64.h b/include/asm-sparc/ide_64.h
deleted file mode 100644
index 99eee9b0ba2..00000000000
--- a/include/asm-sparc/ide_64.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * ide.h: Ultra/PCI specific IDE glue.
- *
- * Copyright (C) 1997  David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
- */
-
-#ifndef _SPARC64_IDE_H
-#define _SPARC64_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-#include <asm/spitfire.h>
-#include <asm/cacheflush.h>
-#include <asm/page.h>
-
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS	10
-# else
-#define MAX_HWIFS	2
-# endif
-#endif
-
-#define __ide_insl(data_reg, buffer, wcount) \
-	__ide_insw(data_reg, buffer, (wcount)<<1)
-#define __ide_outsl(data_reg, buffer, wcount) \
-	__ide_outsw(data_reg, buffer, (wcount)<<1)
-
-/* On sparc64, I/O ports and MMIO registers are accessed identically.  */
-#define __ide_mm_insw	__ide_insw
-#define __ide_mm_insl	__ide_insl
-#define __ide_mm_outsw	__ide_outsw
-#define __ide_mm_outsl	__ide_outsl
-
-static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
-{
-#ifdef DCACHE_ALIASING_POSSIBLE
-	unsigned long end = (unsigned long)dst + (count << 1);
-#endif
-	u16 *ps = dst;
-	u32 *pi;
-
-	if(((u64)ps) & 0x2) {
-		*ps++ = __raw_readw(port);
-		count--;
-	}
-	pi = (u32 *)ps;
-	while(count >= 2) {
-		u32 w;
-
-		w  = __raw_readw(port) << 16;
-		w |= __raw_readw(port);
-		*pi++ = w;
-		count -= 2;
-	}
-	ps = (u16 *)pi;
-	if(count)
-		*ps++ = __raw_readw(port);
-
-#ifdef DCACHE_ALIASING_POSSIBLE
-	__flush_dcache_range((unsigned long)dst, end);
-#endif
-}
-
-static inline void __ide_outsw(void __iomem *port, void *src, u32 count)
-{
-#ifdef DCACHE_ALIASING_POSSIBLE
-	unsigned long end = (unsigned long)src + (count << 1);
-#endif
-	const u16 *ps = src;
-	const u32 *pi;
-
-	if(((u64)src) & 0x2) {
-		__raw_writew(*ps++, port);
-		count--;
-	}
-	pi = (const u32 *)ps;
-	while(count >= 2) {
-		u32 w;
-
-		w = *pi++;
-		__raw_writew((w >> 16), port);
-		__raw_writew(w, port);
-		count -= 2;
-	}
-	ps = (const u16 *)pi;
-	if(count)
-		__raw_writew(*ps, port);
-
-#ifdef DCACHE_ALIASING_POSSIBLE
-	__flush_dcache_range((unsigned long)src, end);
-#endif
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _SPARC64_IDE_H */
-- 
cgit v1.2.3


From 18ad7a61e1b700dfe177fabf1c350b4f5d4da8ac Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Fri, 30 May 2008 22:51:33 +1000
Subject: of_gpio: Should use new <linux/gpio.h> header

Since commit 7560fa60fcdcdb0da662f6a9fad9064b554ef46c (gpio: <linux/gpio.h>
and "no GPIO support here" stubs) drivers can use GPIOs if they're available,
but don't require them.

This patch actually enables this feature.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/linux/of_gpio.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index 2ee97e9877a..67db101d0eb 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -15,7 +15,7 @@
 #define __LINUX_OF_GPIO_H
 
 #include <linux/errno.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
 
 #ifdef CONFIG_OF_GPIO
 
-- 
cgit v1.2.3


From 9a23409b69440e76d34dc23846cae44f46f60d98 Mon Sep 17 00:00:00 2001
From: Maxim Shchetynin <maxim@de.ibm.com>
Date: Wed, 16 Jul 2008 05:51:41 +1000
Subject: powerpc/axonram: Use only one block device major number

Axonram module registers one block device for each DDR2 DIMM found
on a system. This means that each DDR2 DIMM becomes its own block device
major number. This patch lets axonram module to register the only one
block device for all DDR2 DIMMs which also spares kernel resources.

Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/axonram.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 7f59188cd9a..9b639ede06d 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -57,6 +57,8 @@
 #define AXON_RAM_SECTOR_SIZE		1 << AXON_RAM_SECTOR_SHIFT
 #define AXON_RAM_IRQ_FLAGS		IRQF_SHARED | IRQF_TRIGGER_RISING
 
+static int azfs_major, azfs_minor;
+
 struct axon_ram_bank {
 	struct of_device	*device;
 	struct gendisk		*disk;
@@ -227,19 +229,14 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 		goto failed;
 	}
 
-	bank->disk->first_minor = 0;
+	bank->disk->major = azfs_major;
+	bank->disk->first_minor = azfs_minor;
 	bank->disk->fops = &axon_ram_devops;
 	bank->disk->private_data = bank;
 	bank->disk->driverfs_dev = &device->dev;
 
 	sprintf(bank->disk->disk_name, "%s%d",
 			AXON_RAM_DEVICE_NAME, axon_ram_bank_id);
-	bank->disk->major = register_blkdev(0, bank->disk->disk_name);
-	if (bank->disk->major < 0) {
-		dev_err(&device->dev, "Cannot register block device\n");
-		rc = -EFAULT;
-		goto failed;
-	}
 
 	bank->disk->queue = blk_alloc_queue(GFP_KERNEL);
 	if (bank->disk->queue == NULL) {
@@ -276,6 +273,8 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 		goto failed;
 	}
 
+	azfs_minor += bank->disk->minors;
+
 	return 0;
 
 failed:
@@ -310,7 +309,6 @@ axon_ram_remove(struct of_device *device)
 
 	device_remove_file(&device->dev, &dev_attr_ecc);
 	free_irq(bank->irq_id, device);
-	unregister_blkdev(bank->disk->major, bank->disk->disk_name);
 	del_gendisk(bank->disk);
 	iounmap((void __iomem *) bank->io_addr);
 	kfree(bank);
@@ -341,6 +339,14 @@ static struct of_platform_driver axon_ram_driver = {
 static int __init
 axon_ram_init(void)
 {
+	azfs_major = register_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
+	if (azfs_major < 0) {
+		printk(KERN_ERR "%s cannot become block device major number\n",
+				AXON_RAM_MODULE_NAME);
+		return -EFAULT;
+	}
+	azfs_minor = 0;
+
 	return of_register_platform_driver(&axon_ram_driver);
 }
 
@@ -351,6 +357,7 @@ static void __exit
 axon_ram_exit(void)
 {
 	of_unregister_platform_driver(&axon_ram_driver);
+	unregister_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
 }
 
 module_init(axon_ram_init);
-- 
cgit v1.2.3


From 8204cba7fa0ca0752fdaec021dae2634788178aa Mon Sep 17 00:00:00 2001
From: Maxim Shchetynin <maxim@de.ibm.com>
Date: Wed, 16 Jul 2008 05:51:42 +1000
Subject: powerpc/axonram: Enable partitioning of the Axons DDR2 DIMMs

DDR2 memory DIMMs on the Axon could be accessed only as one partition
when using file system drivers which are using the direct_access() method.
This patch enables for such file system drivers to access Axon's DDR2 memory
even if it is splitted in several partitions.

Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/axonram.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 9b639ede06d..9e105cbc5e5 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -150,7 +150,10 @@ axon_ram_direct_access(struct block_device *device, sector_t sector,
 	struct axon_ram_bank *bank = device->bd_disk->private_data;
 	loff_t offset;
 
-	offset = sector << AXON_RAM_SECTOR_SHIFT;
+	offset = sector;
+	if (device->bd_part != NULL)
+		offset += device->bd_part->start_sect;
+	offset <<= AXON_RAM_SECTOR_SHIFT;
 	if (offset >= bank->size) {
 		dev_err(&bank->device->dev, "Access outside of address space\n");
 		return -ERANGE;
-- 
cgit v1.2.3


From 880e710580c09bf86cddac687fc492a8318934fe Mon Sep 17 00:00:00 2001
From: Christian Krafft <krafft@de.ibm.com>
Date: Wed, 16 Jul 2008 05:51:43 +1000
Subject: powerpc/cell/cpufreq: Add spu aware cpufreq governor

This patch adds a cpufreq governor that takes the number of running spus
into account. It's very similar to the ondemand governor, but not as complex.
Instead of hacking spu load into the ondemand governor it might be easier to
have cpufreq accepting multiple governors per cpu in future.
Don't know if this is the right way, but it would keep the governors simple.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/Kconfig             |   9 ++
 arch/powerpc/platforms/cell/Makefile            |   1 +
 arch/powerpc/platforms/cell/cpufreq_spudemand.c | 184 ++++++++++++++++++++++++
 3 files changed, 194 insertions(+)
 create mode 100644 arch/powerpc/platforms/cell/cpufreq_spudemand.c

diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 3959fcfe731..6ee571f743c 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -107,6 +107,15 @@ config CBE_CPUFREQ_PMI
 	  processor will not only be able to run at lower speed,
 	  but also at lower core voltage.
 
+config CBE_CPUFREQ_SPU_GOVERNOR
+	tristate "CBE frequency scaling based on SPU usage"
+	depends on SPU_FS && CPU_FREQ
+	default m
+	help
+	  This governor checks for spu usage to adjust the cpu frequency.
+	  If no spu is running on a given cpu, that cpu will be throttled to
+	  the minimal possible frequency.
+
 endmenu
 
 config OPROFILE_CELL
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index c2a7e4e5ddf..7fcf09bd80b 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
 obj-$(CONFIG_CBE_CPUFREQ_PMI)		+= cbe_cpufreq_pmi.o
 obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
 cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
+obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
 
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_PPC_CELL_NATIVE)		+= smp.o
diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
new file mode 100644
index 00000000000..a3c6c01bd6d
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
@@ -0,0 +1,184 @@
+/*
+ * spu aware cpufreq governor for the cell processor
+ *
+ * © Copyright IBM Corporation 2006-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <asm/atomic.h>
+#include <asm/machdep.h>
+#include <asm/spu.h>
+
+#define POLL_TIME	100000		/* in µs */
+#define EXP		753		/* exp(-1) in fixed-point */
+
+struct spu_gov_info_struct {
+	unsigned long busy_spus;	/* fixed-point */
+	struct cpufreq_policy *policy;
+	struct delayed_work work;
+	unsigned int poll_int;		/* µs */
+};
+static DEFINE_PER_CPU(struct spu_gov_info_struct, spu_gov_info);
+
+static struct workqueue_struct *kspugov_wq;
+
+static int calc_freq(struct spu_gov_info_struct *info)
+{
+	int cpu;
+	int busy_spus;
+
+	cpu = info->policy->cpu;
+	busy_spus = atomic_read(&cbe_spu_info[cpu_to_node(cpu)].busy_spus);
+
+	CALC_LOAD(info->busy_spus, EXP, busy_spus * FIXED_1);
+	pr_debug("cpu %d: busy_spus=%d, info->busy_spus=%ld\n",
+			cpu, busy_spus, info->busy_spus);
+
+	return info->policy->max * info->busy_spus / FIXED_1;
+}
+
+static void spu_gov_work(struct work_struct *work)
+{
+	struct spu_gov_info_struct *info;
+	int delay;
+	unsigned long target_freq;
+
+	info = container_of(work, struct spu_gov_info_struct, work.work);
+
+	/* after cancel_delayed_work_sync we unset info->policy */
+	BUG_ON(info->policy == NULL);
+
+	target_freq = calc_freq(info);
+	__cpufreq_driver_target(info->policy, target_freq, CPUFREQ_RELATION_H);
+
+	delay = usecs_to_jiffies(info->poll_int);
+	queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_init_work(struct spu_gov_info_struct *info)
+{
+	int delay = usecs_to_jiffies(info->poll_int);
+	INIT_DELAYED_WORK_DEFERRABLE(&info->work, spu_gov_work);
+	queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_cancel_work(struct spu_gov_info_struct *info)
+{
+	cancel_delayed_work_sync(&info->work);
+}
+
+static int spu_gov_govern(struct cpufreq_policy *policy, unsigned int event)
+{
+	unsigned int cpu = policy->cpu;
+	struct spu_gov_info_struct *info, *affected_info;
+	int i;
+	int ret = 0;
+
+	info = &per_cpu(spu_gov_info, cpu);
+
+	switch (event) {
+	case CPUFREQ_GOV_START:
+		if (!cpu_online(cpu)) {
+			printk(KERN_ERR "cpu %d is not online\n", cpu);
+			ret = -EINVAL;
+			break;
+		}
+
+		if (!policy->cur) {
+			printk(KERN_ERR "no cpu specified in policy\n");
+			ret = -EINVAL;
+			break;
+		}
+
+		/* initialize spu_gov_info for all affected cpus */
+		for_each_cpu_mask(i, policy->cpus) {
+			affected_info = &per_cpu(spu_gov_info, i);
+			affected_info->policy = policy;
+		}
+
+		info->poll_int = POLL_TIME;
+
+		/* setup timer */
+		spu_gov_init_work(info);
+
+		break;
+
+	case CPUFREQ_GOV_STOP:
+		/* cancel timer */
+		spu_gov_cancel_work(info);
+
+		/* clean spu_gov_info for all affected cpus */
+		for_each_cpu_mask (i, policy->cpus) {
+			info = &per_cpu(spu_gov_info, i);
+			info->policy = NULL;
+		}
+
+		break;
+	}
+
+	return ret;
+}
+
+static struct cpufreq_governor spu_governor = {
+	.name = "spudemand",
+	.governor = spu_gov_govern,
+	.owner = THIS_MODULE,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init spu_gov_init(void)
+{
+	int ret;
+
+	kspugov_wq = create_workqueue("kspugov");
+	if (!kspugov_wq) {
+		printk(KERN_ERR "creation of kspugov failed\n");
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = cpufreq_register_governor(&spu_governor);
+	if (ret) {
+		printk(KERN_ERR "registration of governor failed\n");
+		destroy_workqueue(kspugov_wq);
+		goto out;
+	}
+out:
+	return ret;
+}
+
+static void __exit spu_gov_exit(void)
+{
+	cpufreq_unregister_governor(&spu_governor);
+	destroy_workqueue(kspugov_wq);
+}
+
+
+module_init(spu_gov_init);
+module_exit(spu_gov_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+
-- 
cgit v1.2.3


From 70694a8bab22bd0cc98ff4ee5cc75fe9be30fcd0 Mon Sep 17 00:00:00 2001
From: Christian Krafft <krafft@de.ibm.com>
Date: Wed, 16 Jul 2008 05:51:44 +1000
Subject: powerpc/cell: Cleanup sysreset_hack for IBM cell blades

This patch adds a config option for the sysreset_hack used for
IBM Cell blades. The code is moves from pervasive.c into ras.c and
gets it's own init method.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/Kconfig     |  8 ++++++
 arch/powerpc/platforms/cell/pervasive.c | 27 +------------------
 arch/powerpc/platforms/cell/pervasive.h |  9 +++++++
 arch/powerpc/platforms/cell/ras.c       | 46 +++++++++++++++++++++++++++++++++
 4 files changed, 64 insertions(+), 26 deletions(-)

diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 6ee571f743c..2d1957bc450 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -83,6 +83,14 @@ config CBE_RAS
 	depends on PPC_CELL_NATIVE
 	default y
 
+config PPC_IBM_CELL_RESETBUTTON
+	bool "IBM Cell Blade Pinhole reset button"
+	depends on CBE_RAS && PPC_IBM_CELL_BLADE
+	default y
+	help
+	  Support Pinhole Resetbutton on IBM Cell blades.
+	  This adds a method to trigger system reset via front panel pinhole button.
+
 config CBE_THERM
 	tristate "CBE thermal support"
 	default m
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 8a3631ce912..efdacc82957 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -38,8 +38,6 @@
 
 #include "pervasive.h"
 
-static int sysreset_hack;
-
 static void cbe_power_save(void)
 {
 	unsigned long ctrl, thread_switch_control;
@@ -87,9 +85,6 @@ static void cbe_power_save(void)
 
 static int cbe_system_reset_exception(struct pt_regs *regs)
 {
-	int cpu;
-	struct cbe_pmd_regs __iomem *pmd;
-
 	switch (regs->msr & SRR1_WAKEMASK) {
 	case SRR1_WAKEEE:
 		do_IRQ(regs);
@@ -98,19 +93,7 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 		timer_interrupt(regs);
 		break;
 	case SRR1_WAKEMT:
-		/*
-		 * The BMC can inject user triggered system reset exceptions,
-		 * but cannot set the system reset reason in srr1,
-		 * so check an extra register here.
-		 */
-		if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
-			pmd = cbe_get_cpu_pmd_regs(cpu);
-			if (in_be64(&pmd->ras_esc_0) & 0xffff) {
-				out_be64(&pmd->ras_esc_0, 0);
-				return 0;
-			}
-		}
-		break;
+		return cbe_sysreset_hack();
 #ifdef CONFIG_CBE_RAS
 	case SRR1_WAKESYSERR:
 		cbe_system_error_exception(regs);
@@ -134,8 +117,6 @@ void __init cbe_pervasive_init(void)
 	if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
 		return;
 
-	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
-
 	for_each_possible_cpu(cpu) {
 		struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu);
 		if (!regs)
@@ -144,12 +125,6 @@ void __init cbe_pervasive_init(void)
 		 /* Enable Pause(0) control bit */
 		out_be64(&regs->pmcr, in_be64(&regs->pmcr) |
 					    CBE_PMD_PAUSE_ZERO_CONTROL);
-
-		/* Enable JTAG system-reset hack */
-		if (sysreset_hack)
-			out_be32(&regs->fir_mode_reg,
-				in_be32(&regs->fir_mode_reg) |
-				CBE_PMD_FIR_MODE_M8);
 	}
 
 	ppc_md.power_save = cbe_power_save;
diff --git a/arch/powerpc/platforms/cell/pervasive.h b/arch/powerpc/platforms/cell/pervasive.h
index 7b50947f804..fd4d7b7092b 100644
--- a/arch/powerpc/platforms/cell/pervasive.h
+++ b/arch/powerpc/platforms/cell/pervasive.h
@@ -30,4 +30,13 @@ extern void cbe_system_error_exception(struct pt_regs *regs);
 extern void cbe_maintenance_exception(struct pt_regs *regs);
 extern void cbe_thermal_exception(struct pt_regs *regs);
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+extern int cbe_sysreset_hack(void);
+#else
+static inline int cbe_sysreset_hack(void)
+{
+	return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 #endif
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 505f9b9bdf0..2a14b052abc 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -236,6 +236,52 @@ static struct notifier_block cbe_ptcal_reboot_notifier = {
 	.notifier_call = cbe_ptcal_notify_reboot
 };
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+static int sysreset_hack;
+
+static int __init cbe_sysreset_init(void)
+{
+	struct cbe_pmd_regs __iomem *regs;
+
+	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+	if (!sysreset_hack)
+		return 0;
+
+	regs = cbe_get_cpu_pmd_regs(0);
+	if (!regs)
+		return 0;
+
+	/* Enable JTAG system-reset hack */
+	out_be32(&regs->fir_mode_reg,
+		in_be32(&regs->fir_mode_reg) |
+		CBE_PMD_FIR_MODE_M8);
+
+	return 0;
+}
+device_initcall(cbe_sysreset_init);
+
+int cbe_sysreset_hack(void)
+{
+	struct cbe_pmd_regs __iomem *regs;
+
+	/*
+	 * The BMC can inject user triggered system reset exceptions,
+	 * but cannot set the system reset reason in srr1,
+	 * so check an extra register here.
+	 */
+	if (sysreset_hack && (smp_processor_id() == 0)) {
+		regs = cbe_get_cpu_pmd_regs(0);
+		if (!regs)
+			return 0;
+		if (in_be64(&regs->ras_esc_0) & 0x0000ffff) {
+			out_be64(&regs->ras_esc_0, 0);
+			return 0;
+		}
+	}
+	return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 int __init cbe_ptcal_init(void)
 {
 	int ret;
-- 
cgit v1.2.3


From 4795b7801b07e1b7286edb0d9321433fc0eac6cc Mon Sep 17 00:00:00 2001
From: Christian Krafft <krafft@de.ibm.com>
Date: Wed, 16 Jul 2008 05:51:45 +1000
Subject: powerpc/cell: Add support for power button of future IBM cell blades

This patch adds support for the power button on future IBM cell blades.
It actually doesn't shut down the machine. Instead it exposes an
input device /dev/input/event0 to userspace which sends KEY_POWER
if power button has been pressed.
haldaemon actually recognizes the button, so a plattform independent acpid
replacement should handle it correctly.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/Kconfig           |   8 ++
 arch/powerpc/platforms/cell/Makefile          |   2 +
 arch/powerpc/platforms/cell/cbe_powerbutton.c | 117 ++++++++++++++++++++++++++
 include/asm-powerpc/pmi.h                     |   1 +
 4 files changed, 128 insertions(+)
 create mode 100644 arch/powerpc/platforms/cell/cbe_powerbutton.c

diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 2d1957bc450..c14d7d8d96c 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -91,6 +91,14 @@ config PPC_IBM_CELL_RESETBUTTON
 	  Support Pinhole Resetbutton on IBM Cell blades.
 	  This adds a method to trigger system reset via front panel pinhole button.
 
+config PPC_IBM_CELL_POWERBUTTON
+	tristate "IBM Cell Blade power button"
+	depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV
+	default y
+	help
+	  Support Powerbutton on IBM Cell blades.
+	  This will enable the powerbutton as an input device.
+
 config CBE_THERM
 	tristate "CBE thermal support"
 	default m
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 7fcf09bd80b..7fd830872c4 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
 cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
 obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
 
+obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o
+
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_PPC_CELL_NATIVE)		+= smp.o
 endif
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
new file mode 100644
index 00000000000..dcddaa5fcb6
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -0,0 +1,117 @@
+/*
+ * driver for powerbutton on IBM cell blades
+ *
+ * (C) Copyright IBM Corp. 2005-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <asm/pmi.h>
+#include <asm/prom.h>
+
+static struct input_dev *button_dev;
+static struct platform_device *button_pdev;
+
+static void cbe_powerbutton_handle_pmi(pmi_message_t pmi_msg)
+{
+	BUG_ON(pmi_msg.type != PMI_TYPE_POWER_BUTTON);
+
+	input_report_key(button_dev, KEY_POWER, 1);
+	input_sync(button_dev);
+	input_report_key(button_dev, KEY_POWER, 0);
+	input_sync(button_dev);
+}
+
+static struct pmi_handler cbe_pmi_handler = {
+	.type			= PMI_TYPE_POWER_BUTTON,
+	.handle_pmi_message	= cbe_powerbutton_handle_pmi,
+};
+
+static int __init cbe_powerbutton_init(void)
+{
+	int ret = 0;
+	struct input_dev *dev;
+
+	if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+		printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	dev = input_allocate_device();
+	if (!dev) {
+		ret = -ENOMEM;
+		printk(KERN_ERR "%s: Not enough memory.\n", __func__);
+		goto out;
+	}
+
+	set_bit(EV_KEY, dev->evbit);
+	set_bit(KEY_POWER, dev->keybit);
+
+	dev->name = "Power Button";
+	dev->id.bustype = BUS_HOST;
+
+	/* this makes the button look like an acpi power button
+	 * no clue whether anyone relies on that though */
+	dev->id.product = 0x02;
+	dev->phys = "LNXPWRBN/button/input0";
+
+	button_pdev = platform_device_register_simple("power_button", 0, NULL, 0);
+	if (IS_ERR(button_pdev)) {
+		ret = PTR_ERR(button_pdev);
+		goto out_free_input;
+	}
+
+	dev->dev.parent = &button_pdev->dev;
+	ret = input_register_device(dev);
+	if (ret) {
+		printk(KERN_ERR "%s: Failed to register device\n", __func__);
+		goto out_free_pdev;
+	}
+
+	button_dev = dev;
+
+	ret = pmi_register_handler(&cbe_pmi_handler);
+	if (ret) {
+		printk(KERN_ERR "%s: Failed to register with pmi.\n", __func__);
+		goto out_free_pdev;
+	}
+
+	goto out;
+
+out_free_pdev:
+	platform_device_unregister(button_pdev);
+out_free_input:
+	input_free_device(dev);
+out:
+	return ret;
+}
+
+static void __exit cbe_powerbutton_exit(void)
+{
+	pmi_unregister_handler(&cbe_pmi_handler);
+	platform_device_unregister(button_pdev);
+	input_free_device(button_dev);
+}
+
+module_init(cbe_powerbutton_init);
+module_exit(cbe_powerbutton_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/include/asm-powerpc/pmi.h b/include/asm-powerpc/pmi.h
index e1dc090748d..b4e91fbf508 100644
--- a/include/asm-powerpc/pmi.h
+++ b/include/asm-powerpc/pmi.h
@@ -30,6 +30,7 @@
 #ifdef __KERNEL__
 
 #define PMI_TYPE_FREQ_CHANGE	0x01
+#define PMI_TYPE_POWER_BUTTON	0x02
 #define PMI_READ_TYPE		0
 #define PMI_READ_DATA0		1
 #define PMI_READ_DATA1		2
-- 
cgit v1.2.3


From 4f3dd8a06239c0a19d772a27c2f618dc2faadf4a Mon Sep 17 00:00:00 2001
From: Mark Nelson <markn@au1.ibm.com>
Date: Wed, 16 Jul 2008 05:51:47 +1000
Subject: powerpc/dma: Use the struct dma_attrs in iommu code

Update iommu_alloc() to take the struct dma_attrs and pass them on to
tce_build(). This change propagates down to the tce_build functions of
all the platforms.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/iommu.c            | 13 ++++++++-----
 arch/powerpc/platforms/cell/iommu.c    |  5 +++--
 arch/powerpc/platforms/iseries/iommu.c |  3 ++-
 arch/powerpc/platforms/pasemi/iommu.c  |  3 ++-
 arch/powerpc/platforms/pseries/iommu.c | 14 +++++++++-----
 arch/powerpc/sysdev/dart_iommu.c       |  3 ++-
 include/asm-powerpc/machdep.h          |  3 ++-
 7 files changed, 28 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 8c68ee9e5d1..2385f68c175 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -186,7 +186,8 @@ static unsigned long iommu_range_alloc(struct device *dev,
 static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 			      void *page, unsigned int npages,
 			      enum dma_data_direction direction,
-			      unsigned long mask, unsigned int align_order)
+			      unsigned long mask, unsigned int align_order,
+			      struct dma_attrs *attrs)
 {
 	unsigned long entry, flags;
 	dma_addr_t ret = DMA_ERROR_CODE;
@@ -205,7 +206,7 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 
 	/* Put the TCEs in the HW table */
 	ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & IOMMU_PAGE_MASK,
-			 direction);
+			 direction, attrs);
 
 
 	/* Flush/invalidate TLB caches if necessary */
@@ -336,7 +337,8 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 			    npages, entry, dma_addr);
 
 		/* Insert into HW table */
-		ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK, direction);
+		ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK,
+				 direction, attrs);
 
 		/* If we are in an open segment, try merging */
 		if (segstart != s) {
@@ -573,7 +575,8 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 			align = PAGE_SHIFT - IOMMU_PAGE_SHIFT;
 
 		dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction,
-					 mask >> IOMMU_PAGE_SHIFT, align);
+					 mask >> IOMMU_PAGE_SHIFT, align,
+					 attrs);
 		if (dma_handle == DMA_ERROR_CODE) {
 			if (printk_ratelimit())  {
 				printk(KERN_INFO "iommu_alloc failed, "
@@ -642,7 +645,7 @@ void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
 	nio_pages = size >> IOMMU_PAGE_SHIFT;
 	io_order = get_iommu_order(size);
 	mapping = iommu_alloc(dev, tbl, ret, nio_pages, DMA_BIDIRECTIONAL,
-			      mask >> IOMMU_PAGE_SHIFT, io_order);
+			      mask >> IOMMU_PAGE_SHIFT, io_order, NULL);
 	if (mapping == DMA_ERROR_CODE) {
 		free_pages((unsigned long)ret, order);
 		return NULL;
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index eeacb3a52ca..3b7078453e7 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -173,7 +173,8 @@ static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
 }
 
 static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
-		unsigned long uaddr, enum dma_data_direction direction)
+		unsigned long uaddr, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	int i;
 	unsigned long *io_pte, base_pte;
@@ -519,7 +520,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 
 	__set_bit(0, window->table.it_map);
 	tce_build_cell(&window->table, window->table.it_offset, 1,
-		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE);
+		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE, NULL);
 	window->table.it_hint = window->table.it_blocksize;
 
 	return window;
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index ab5d8687c3c..bc818e4e203 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -42,7 +42,8 @@
 #include <asm/iseries/iommu.h>
 
 static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
-		unsigned long uaddr, enum dma_data_direction direction)
+		unsigned long uaddr, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	u64 rc;
 	u64 tce, rpn;
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 86967bdd877..70541b7a501 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -85,7 +85,8 @@ static int iommu_table_iobmap_inited;
 
 static void iobmap_build(struct iommu_table *tbl, long index,
 			 long npages, unsigned long uaddr,
-			 enum dma_data_direction direction)
+			 enum dma_data_direction direction,
+			 struct dma_attrs *attrs)
 {
 	u32 *ip;
 	u32 rpn;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 9a12908510f..5377dd4b849 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -50,7 +50,8 @@
 
 static void tce_build_pSeries(struct iommu_table *tbl, long index,
 			      long npages, unsigned long uaddr,
-			      enum dma_data_direction direction)
+			      enum dma_data_direction direction,
+			      struct dma_attrs *attrs)
 {
 	u64 proto_tce;
 	u64 *tcep;
@@ -95,7 +96,8 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
 
 static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				long npages, unsigned long uaddr,
-				enum dma_data_direction direction)
+				enum dma_data_direction direction,
+				struct dma_attrs *attrs)
 {
 	u64 rc;
 	u64 proto_tce, tce;
@@ -127,7 +129,8 @@ static DEFINE_PER_CPU(u64 *, tce_page) = NULL;
 
 static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				     long npages, unsigned long uaddr,
-				     enum dma_data_direction direction)
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs)
 {
 	u64 rc;
 	u64 proto_tce;
@@ -136,7 +139,8 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	long l, limit;
 
 	if (npages == 1) {
-		tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction);
+		tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+				    direction, attrs);
 		return;
 	}
 
@@ -150,7 +154,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		/* If allocation fails, fall back to the loop implementation */
 		if (!tcep) {
 			tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
-					    direction);
+					    direction, attrs);
 			return;
 		}
 		__get_cpu_var(tce_page) = tcep;
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 005c2ecf976..de8c8b542cf 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -149,7 +149,8 @@ static void dart_flush(struct iommu_table *tbl)
 
 static void dart_build(struct iommu_table *tbl, long index,
 		       long npages, unsigned long uaddr,
-		       enum dma_data_direction direction)
+		       enum dma_data_direction direction,
+		       struct dma_attrs *attrs)
 {
 	unsigned int *dp;
 	unsigned int rpn;
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 989922621e3..1233d735fd2 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -80,7 +80,8 @@ struct machdep_calls {
 				     long index,
 				     long npages,
 				     unsigned long uaddr,
-				     enum dma_data_direction direction);
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs);
 	void		(*tce_free)(struct iommu_table *tbl,
 				    long index,
 				    long npages);
-- 
cgit v1.2.3


From 6e5f1537833a9fc8251157dff403231f5c89a894 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 16 Jul 2008 23:43:06 +1000
Subject: powerpc: Add a 6xx defconfig

This is a defconfig from Dave Jones and should be similar (if not
identical) to the fedora ppc32 defconfig.  The intent is to cover all
cache coherent 6xx based chips and platforms as reasonable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/ppc6xx_defconfig | 3304 +++++++++++++++++++++++++++++++++
 1 file changed, 3304 insertions(+)
 create mode 100644 arch/powerpc/configs/ppc6xx_defconfig

diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
new file mode 100644
index 00000000000..e6e91c85da3
--- /dev/null
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -0,0 +1,3304 @@
+# powerpc
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-git2
+# Tue Jul 15 23:54:18 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_LSF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+# CONFIG_PPC_MPC5200_SIMPLE is not set
+CONFIG_PPC_EFIKA=y
+# CONFIG_PPC_LITE5200 is not set
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_PMAC=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
+CONFIG_MPC8272_ADS=y
+CONFIG_PQ2FADS=y
+CONFIG_EP8248E=y
+CONFIG_PQ2ADS=y
+CONFIG_8260=y
+CONFIG_8272=y
+CONFIG_PQ2_ADS_PCI_PIC=y
+CONFIG_PPC_83xx=y
+CONFIG_MPC831x_RDB=y
+CONFIG_MPC832x_MDS=y
+CONFIG_MPC832x_RDB=y
+CONFIG_MPC834x_MDS=y
+CONFIG_MPC834x_ITX=y
+CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
+CONFIG_MPC837x_MDS=y
+CONFIG_MPC837x_RDB=y
+CONFIG_SBC834x=y
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC831x=y
+CONFIG_PPC_MPC832x=y
+CONFIG_PPC_MPC834x=y
+CONFIG_PPC_MPC837x=y
+CONFIG_PPC_86xx=y
+CONFIG_MPC8641_HPCN=y
+CONFIG_SBC8641D=y
+CONFIG_MPC8610_HPCD=y
+CONFIG_MPC8641=y
+CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_IPIC=y
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# CPU Frequency drivers
+#
+CONFIG_CPU_FREQ_PMAC=y
+# CONFIG_PPC601_SYNC_FIX is not set
+CONFIG_TAU=y
+# CONFIG_TAU_INT is not set
+CONFIG_TAU_AVERAGE=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=m
+CONFIG_PPC_BESTCOMM_FEC=m
+CONFIG_PPC_BESTCOMM_GEN_BD=m
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_APM_EMULATION=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_PAGE_OFFSET_BOOL is not set
+CONFIG_PAGE_OFFSET=0xc0000000
+# CONFIG_KERNEL_START_BOOL is not set
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_NET_DCCPPROBE=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_DECNET=m
+CONFIG_DECNET_ROUTER=y
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_QOS=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_IEEE80211=m
+CONFIG_IEEE80211_DEBUG=y
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_PC_PCMCIA is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPACPI is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+CONFIG_MAC_FLOPPY=m
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_VIRTIO_BLK=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
+CONFIG_BLK_DEV_IDEDMA_PMAC=y
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_BLK_DEV_HD_ONLY=y
+CONFIG_BLK_DEV_HD=y
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_MESH=m
+CONFIG_SCSI_MESH_SYNC_RATE=5
+CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
+CONFIG_SCSI_MAC53C94=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=m
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+CONFIG_ATA_PIIX=m
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+CONFIG_PDC_ADMA=m
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+CONFIG_ATA_GENERIC=m
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=m
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_OPTIDMA=m
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+CONFIG_PATA_VIA=m
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+CONFIG_PATA_SCH=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_DEBUG=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_PMAC_APM_EMU=y
+CONFIG_PMAC_MEDIABAY=y
+CONFIG_PMAC_BACKLIGHT=y
+# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
+CONFIG_ADB_MACIO=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_WINDTUNNEL=m
+CONFIG_THERM_ADT746X=m
+CONFIG_WINDFARM=y
+# CONFIG_ANSLCD is not set
+CONFIG_PMAC_RACKMETER=m
+CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NET_SB1000=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MACE=m
+# CONFIG_MACE_AAUI_PORT is not set
+CONFIG_BMAC=m
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+# CONFIG_WD80x3 is not set
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+CONFIG_AMD8111_ETH=m
+CONFIG_AMD8111E_NAPI=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_ADAPTEC_STARFIRE_NAPI=y
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_FORCEDETH=m
+CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=m
+CONFIG_FEALNX=m
+CONFIG_NATSEMI=m
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R6040=m
+CONFIG_SIS900=m
+CONFIG_EPIC100=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_TLAN=m
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_RHINE_NAPI=y
+CONFIG_SC92031=m
+CONFIG_NET_POCKET=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_FEC_MPC52xx=m
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_FS_ENET is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_DL2K=m
+CONFIG_E1000=m
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+CONFIG_E1000E=m
+CONFIG_E1000E_ENABLED=y
+CONFIG_IP1000=m
+CONFIG_IGB=m
+CONFIG_NS83820=m
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_R8169=m
+CONFIG_R8169_NAPI=y
+CONFIG_R8169_VLAN=y
+CONFIG_SIS190=m
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_VIA_VELOCITY=m
+CONFIG_TIGON3=m
+CONFIG_BNX2=m
+CONFIG_GIANFAR=m
+CONFIG_GFAR_NAPI=y
+# CONFIG_UCC_GETH is not set
+CONFIG_MV643XX_ETH=m
+CONFIG_QLA3XXX=m
+CONFIG_ATL1=m
+CONFIG_NETDEV_10000=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T1_NAPI=y
+CONFIG_CHELSIO_T3=m
+CONFIG_IXGBE=m
+CONFIG_IXGB=m
+CONFIG_IXGB_NAPI=y
+CONFIG_S2IO=m
+CONFIG_S2IO_NAPI=y
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NIU=m
+# CONFIG_MLX4_CORE is not set
+CONFIG_TEHUTI=m
+CONFIG_BNX2X=m
+CONFIG_SFC=m
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+CONFIG_ATM_FORE200E_MAYBE=m
+# CONFIG_ATM_FORE200E_PCA is not set
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_FDDI=y
+# CONFIG_DEFXX is not set
+CONFIG_SKFP=m
+# CONFIG_HIPPI is not set
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_NET_FC=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+CONFIG_INPUT_LIRC=y
+CONFIG_LIRC_DEV=m
+CONFIG_LIRC_ATIUSB=m
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_CMDIR=m
+CONFIG_LIRC_I2C=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_IT87=m
+CONFIG_LIRC_MCEUSB=m
+CONFIG_LIRC_MCEUSB2=m
+CONFIG_LIRC_PVR150=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_STREAMZAP=m
+CONFIG_LIRC_TTUSBIR=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+CONFIG_NOZOMI=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_PMACZILOG_TTYS is not set
+# CONFIG_SERIAL_CPM is not set
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_QE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_CRASH is not set
+CONFIG_BRIQ_PANEL=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+# CONFIG_HVC_RTAS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
+CONFIG_R3964=m
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_HYDRA=m
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=m
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+CONFIG_I2C_VOODOO3=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_PCF8575=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_MATROX is not set
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_APM_POWER=m
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_PMU=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7473=m
+CONFIG_SENSORS_AMS=m
+CONFIG_SENSORS_AMS_PMU=y
+CONFIG_SENSORS_AMS_I2C=y
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_MPC5200_WDT is not set
+CONFIG_83xx_WDT=m
+CONFIG_WATCHDOG_RTAS=m
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=m
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR_I2C=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_SAA6588=m
+# CONFIG_VIDEO_PMS is not set
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+# CONFIG_MT9M001_PCA9536_SWITCH is not set
+CONFIG_SOC_CAMERA_MT9V022=m
+# CONFIG_MT9V022_PCA9536_SWITCH is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+CONFIG_DVB_CINERGYT2_TUNING=y
+CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
+CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
+CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
+CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
+CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=y
+CONFIG_AGP_UNINORTH=y
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_VGASTATE=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SVGALIB=m
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+CONFIG_FB_PLATINUM=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_CT65550=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_MATROX_MULTIHEAD=y
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=y
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+# CONFIG_FB_SIS is not set
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+CONFIG_FB_3DFX_ACCEL=y
+CONFIG_FB_VOODOO1=m
+# CONFIG_FB_VT8623 is not set
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_TRIDENT_ACCEL=y
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+CONFIG_FB_SM501=m
+CONFIG_FB_IBM_GXT4500=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+CONFIG_SND_VMASTER=y
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_SC6000 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_FM801_TEA575X=m
+# CONFIG_SND_HDA_INTEL is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_HIFIER=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+CONFIG_SND_KORG1212=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+# CONFIG_USB_TEST is not set
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+CONFIG_AUXDISPLAY=y
+CONFIG_KS0108=m
+CONFIG_KS0108_PORT=0x378
+CONFIG_KS0108_DELAY=2
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_SMX=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4DEV_FS=m
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_JBD2_DEBUG=y
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_HPFS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_DLM_DEBUG=y
+CONFIG_QE_GPIO=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_HIGHMEM=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_FRAME_POINTER=y
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_LATENCYTOP=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+CONFIG_FTRACE=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_KGDB_CONSOLE is not set
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_CRYPTO_DEV_TALITOS=m
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
-- 
cgit v1.2.3


From 059e4938f8b060b10c4352e6c45739473bc73267 Mon Sep 17 00:00:00 2001
From: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Date: Thu, 17 Jul 2008 07:22:19 +1000
Subject: powerpc/ps3: Add a sub-match id to ps3_system_bus

Add sub match id for ps3 system bus so that two different system bus
devices can be connected to a shared device.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/ps3/device-init.c |  1 +
 arch/powerpc/platforms/ps3/system-bus.c  | 21 ++++++++++++++-------
 drivers/video/ps3fb.c                    |  1 +
 include/asm-powerpc/ps3.h                |  7 +++++++
 4 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 3866debfa3c..ffdd8e963fb 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -486,6 +486,7 @@ static int __init ps3_register_graphics_devices(void)
 		return -ENOMEM;
 
 	p->dev.match_id = PS3_MATCH_ID_GRAPHICS;
+	p->dev.match_sub_id = PS3_MATCH_SUB_ID_FB;
 	p->dev.dev_type = PS3_DEVICE_TYPE_IOC0;
 
 	result = ps3_system_bus_device_register(&p->dev);
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index d66c3628a11..280ee88cb0b 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -347,16 +347,23 @@ static int ps3_system_bus_match(struct device *_dev,
 	struct ps3_system_bus_driver *drv = ps3_drv_to_system_bus_drv(_drv);
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 
-	result = dev->match_id == drv->match_id;
+	if (!dev->match_sub_id)
+		result = dev->match_id == drv->match_id;
+	else
+		result = dev->match_sub_id == drv->match_sub_id &&
+			dev->match_id == drv->match_id;
 
 	if (result)
-		pr_info("%s:%d: dev=%u(%s), drv=%u(%s): match\n", __func__,
-			__LINE__, dev->match_id, dev->core.bus_id,
-			drv->match_id, drv->core.name);
+		pr_info("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): match\n",
+			__func__, __LINE__,
+			dev->match_id, dev->match_sub_id, dev->core.bus_id,
+			drv->match_id, drv->match_sub_id, drv->core.name);
 	else
-		pr_debug("%s:%d: dev=%u(%s), drv=%u(%s): miss\n", __func__,
-			__LINE__, dev->match_id, dev->core.bus_id,
-			drv->match_id, drv->core.name);
+		pr_debug("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): miss\n",
+			__func__, __LINE__,
+			dev->match_id, dev->match_sub_id, dev->core.bus_id,
+			drv->match_id, drv->match_sub_id, drv->core.name);
+
 	return result;
 }
 
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index dc3af1c78c5..4b5d8077190 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -1297,6 +1297,7 @@ static int ps3fb_shutdown(struct ps3_system_bus_device *dev)
 
 static struct ps3_system_bus_driver ps3fb_driver = {
 	.match_id	= PS3_MATCH_ID_GRAPHICS,
+	.match_sub_id	= PS3_MATCH_SUB_ID_FB,
 	.core.name	= DEVICE_NAME,
 	.core.owner	= THIS_MODULE,
 	.probe		= ps3fb_probe,
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index 81ffe3b3c1c..f9e34c493cb 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -337,12 +337,18 @@ enum ps3_system_bus_device_type {
 	PS3_DEVICE_TYPE_LPM,
 };
 
+enum ps3_match_sub_id {
+	/* for PS3_MATCH_ID_GRAPHICS */
+	PS3_MATCH_SUB_ID_FB		= 1,
+};
+
 /**
  * struct ps3_system_bus_device - a device on the system bus
  */
 
 struct ps3_system_bus_device {
 	enum ps3_match_id match_id;
+	enum ps3_match_sub_id match_sub_id;
 	enum ps3_system_bus_device_type dev_type;
 
 	u64 bus_id;                       /* SB */
@@ -371,6 +377,7 @@ int ps3_close_hv_device(struct ps3_system_bus_device *dev);
 
 struct ps3_system_bus_driver {
 	enum ps3_match_id match_id;
+	enum ps3_match_sub_id match_sub_id;
 	struct device_driver core;
 	int (*probe)(struct ps3_system_bus_device *);
 	int (*remove)(struct ps3_system_bus_device *);
-- 
cgit v1.2.3


From 72e82dcd1f8fc6f99e0ee2ef1ed1ff37c1e63858 Mon Sep 17 00:00:00 2001
From: Geoff Levand <geoffrey.levand@am.sony.com>
Date: Thu, 17 Jul 2008 07:22:26 +1000
Subject: powerpc/ps3: Update ps3_defconfig

Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/ps3_defconfig | 196 +++++++++++++++++++++++--------------
 1 file changed, 122 insertions(+), 74 deletions(-)

diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 71d79e428d2..f9a3d3b394c 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon Apr 28 12:39:10 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 16 13:59:24 2008
 #
 CONFIG_PPC64=y
 
@@ -14,8 +14,9 @@ CONFIG_POWER4=y
 CONFIG_TUNE_CELL=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -90,6 +92,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,15 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -132,6 +138,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -152,13 +159,8 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -187,6 +189,7 @@ CONFIG_PPC_CELL=y
 # Cell Broadband Engine options
 #
 CONFIG_SPU_FS=y
+CONFIG_SPU_FS_64K_LS=y
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
 # CONFIG_IPIC is not set
@@ -222,6 +225,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -248,18 +252,22 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_ARCH_MEMORY_PROBE=y
-# CONFIG_PPC_HAS_HASH_64K is not set
+CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
@@ -273,6 +281,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
@@ -412,6 +421,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -478,6 +489,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
@@ -533,8 +545,18 @@ CONFIG_USB_NET_MCS7830=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_WAN is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -603,6 +625,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -618,23 +641,17 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -652,8 +669,17 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -671,8 +697,8 @@ CONFIG_FB=y
 CONFIG_FB_SYS_FILLRECT=y
 CONFIG_FB_SYS_COPYAREA=y
 CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -712,18 +738,12 @@ CONFIG_FB_LOGO_EXTRA=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -732,53 +752,20 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerMac requires I2C
-#
-
-#
-# ALSA PowerPC devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PPC=y
 CONFIG_SND_PS3=m
 CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
+CONFIG_HIDRAW=y
 
 #
 # USB Input Devices
@@ -807,17 +794,20 @@ CONFIG_USB=m
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -831,6 +821,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -890,12 +881,45 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -911,6 +935,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -959,8 +984,8 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1059,12 +1084,15 @@ CONFIG_NLS_ISO8859_1=y
 #
 CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
@@ -1082,7 +1110,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1090,33 +1118,49 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
 # CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_LOCKDEP=y
+CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1172,6 +1216,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-- 
cgit v1.2.3


From 6fdc9f5076e0f6018e1d9250c6673f812b556d90 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 17 Jul 2008 08:12:25 +1000
Subject: powerpc: Fix support for latencytop

We need to pass the kernel stack pointer instead of the user space
stack pointer in save_stack_trace_tsk().

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/stacktrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index 071bee3ec74..f2589645870 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -59,6 +59,6 @@ EXPORT_SYMBOL_GPL(save_stack_trace);
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
-	save_context_stack(trace, tsk->thread.regs->gpr[1], tsk, 0);
+	save_context_stack(trace, tsk->thread.ksp, tsk, 0);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
-- 
cgit v1.2.3


From 1856c020402f602b2bd26bcc9b77250304565b7e Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Thu, 17 Jul 2008 14:46:00 +1000
Subject: powerpc: Use WARN_ON(1) instead of __WARN()

__WARN() is not defined for all configs, use WARN_ON(1) instead.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/lib/feature-fixups.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 4e43702b981..8c5a03be31e 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -99,7 +99,7 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 
 	for (; fcur < fend; fcur++) {
 		if (patch_feature_section(value, fcur)) {
-			__WARN();
+			WARN_ON(1);
 			printk("Unable to patch feature section at %p - %p" \
 				" with %p - %p\n",
 				calc_addr(fcur, fcur->start_off),
-- 
cgit v1.2.3


From 67260ac9a397eb7c9e2980be2865912d3840b042 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 17 Jul 2008 15:53:31 +1000
Subject: powerpc: Fix OF parsing of 64 bits PCI addresses

The OF parsing code for PCI addresses isn't always treating properly
the address space indication 0b11 (ie. 0x3) as meaning 64 bits
memory space.

This means that it fails to parse addresses for PCI BARs that have
this encoding set by the firmware, which happens on some SLOF
versions and breaks offb palette handling on Powerstation.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
---
 arch/powerpc/kernel/pci-common.c |  1 +
 arch/powerpc/kernel/prom_parse.c | 44 ++++++++++++++++++++++------------------
 2 files changed, 25 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 063cdd41304..224e9a11765 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -598,6 +598,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			res->start = pci_addr;
 			break;
 		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
 			printk(KERN_INFO
 			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
 			       cpu_addr, cpu_addr + size - 1, pci_addr,
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 90eb3a3e383..bc1fb27368a 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -128,12 +128,35 @@ static void of_bus_pci_count_cells(struct device_node *np,
 		*sizec = 2;
 }
 
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
+{
+	unsigned int flags = 0;
+	u32 w = addr[0];
+
+	switch((w >> 24) & 0x03) {
+	case 0x01:
+		flags |= IORESOURCE_IO;
+		break;
+	case 0x02: /* 32 bits */
+	case 0x03: /* 64 bits */
+		flags |= IORESOURCE_MEM;
+		break;
+	}
+	if (w & 0x40000000)
+		flags |= IORESOURCE_PREFETCH;
+	return flags;
+}
+
 static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 {
 	u64 cp, s, da;
+	unsigned int af, rf;
+
+	af = of_bus_pci_get_flags(addr);
+	rf = of_bus_pci_get_flags(range);
 
 	/* Check address type match */
-	if ((addr[0] ^ range[0]) & 0x03000000)
+	if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
 		return OF_BAD_ADDR;
 
 	/* Read address values, skipping high cell */
@@ -153,25 +176,6 @@ static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
 	return of_bus_default_translate(addr + 1, offset, na - 1);
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = addr[0];
-
-	switch((w >> 24) & 0x03) {
-	case 0x01:
-		flags |= IORESOURCE_IO;
-		break;
-	case 0x02: /* 32 bits */
-	case 0x03: /* 64 bits */
-		flags |= IORESOURCE_MEM;
-		break;
-	}
-	if (w & 0x40000000)
-		flags |= IORESOURCE_PREFETCH;
-	return flags;
-}
-
 const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
 			unsigned int *flags)
 {
-- 
cgit v1.2.3


From 6a2a24bb755405d5311efaaed865042477b26f30 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Thu, 17 Jul 2008 17:17:51 +1000
Subject: powerpc: Add a #define for aligning to a long-sized boundary

Add a #define for aligning to a long-sized boundary. It would be nice
to use sizeof(long) for this, but that requires generating the value
with asm-offsets.c, and asm-offsets.c includes asm-compat.h and we
descend into some sort of recursive include hell.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/asm-powerpc/asm-compat.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h
index 8ec2e1da68b..8f0fe797194 100644
--- a/include/asm-powerpc/asm-compat.h
+++ b/include/asm-powerpc/asm-compat.h
@@ -22,6 +22,7 @@
 #define PPC_STL		stringify_in_c(std)
 #define PPC_LCMPI	stringify_in_c(cmpdi)
 #define PPC_LONG	stringify_in_c(.llong)
+#define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
 #define PPC_TLNEI	stringify_in_c(tdnei)
 #define PPC_LLARX	stringify_in_c(ldarx)
 #define PPC_STLCX	stringify_in_c(stdcx.)
@@ -43,6 +44,7 @@
 #define PPC_STL		stringify_in_c(stw)
 #define PPC_LCMPI	stringify_in_c(cmpwi)
 #define PPC_LONG	stringify_in_c(.long)
+#define PPC_LONG_ALIGN	stringify_in_c(.balign 4)
 #define PPC_TLNEI	stringify_in_c(twnei)
 #define PPC_LLARX	stringify_in_c(lwarx)
 #define PPC_STLCX	stringify_in_c(stwcx.)
-- 
cgit v1.2.3


From 551c3c04b478b987ccd335f1a42362d571b1592d Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Thu, 17 Jul 2008 17:17:52 +1000
Subject: powerpc: Use PPC_LONG_ALIGN in uaccess.h

Use the new PPC_LONG_ALIGN macro instead of passing an argument
to the asm for consistency.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/asm-powerpc/uaccess.h | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h
index 1a0736f8803..bd0fb849515 100644
--- a/include/asm-powerpc/uaccess.h
+++ b/include/asm-powerpc/uaccess.h
@@ -6,6 +6,7 @@
 
 #include <linux/sched.h>
 #include <linux/errno.h>
+#include <asm/asm-compat.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 
@@ -141,12 +142,11 @@ extern long __put_user_bad(void);
 		"	b 2b\n"					\
 		".previous\n"					\
 		".section __ex_table,\"a\"\n"			\
-		"	.balign %5\n"				\
+			PPC_LONG_ALIGN "\n"			\
 			PPC_LONG "1b,3b\n"			\
 		".previous"					\
 		: "=r" (err)					\
-		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err),\
-		  "i"(sizeof(unsigned long)))
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
 
 #ifdef __powerpc64__
 #define __put_user_asm2(x, ptr, retval)				\
@@ -162,13 +162,12 @@ extern long __put_user_bad(void);
 		"	b 3b\n"					\
 		".previous\n"					\
 		".section __ex_table,\"a\"\n"			\
-		"	.balign %5\n"				\
+			PPC_LONG_ALIGN "\n"			\
 			PPC_LONG "1b,4b\n"			\
 			PPC_LONG "2b,4b\n"			\
 		".previous"					\
 		: "=r" (err)					\
-		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err),\
-		  "i"(sizeof(unsigned long)))
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
 #endif /* __powerpc64__ */
 
 #define __put_user_size(x, ptr, size, retval)			\
@@ -226,12 +225,11 @@ extern long __get_user_bad(void);
 		"	b 2b\n"				\
 		".previous\n"				\
 		".section __ex_table,\"a\"\n"		\
-		"	.balign %5\n"			\
+			PPC_LONG_ALIGN "\n"		\
 			PPC_LONG "1b,3b\n"		\
 		".previous"				\
 		: "=r" (err), "=r" (x)			\
-		: "b" (addr), "i" (-EFAULT), "0" (err),	\
-		  "i"(sizeof(unsigned long)))
+		: "b" (addr), "i" (-EFAULT), "0" (err))
 
 #ifdef __powerpc64__
 #define __get_user_asm2(x, addr, err)			\
@@ -249,13 +247,12 @@ extern long __get_user_bad(void);
 		"	b 3b\n"				\
 		".previous\n"				\
 		".section __ex_table,\"a\"\n"		\
-		"	.balign %5\n"			\
+			PPC_LONG_ALIGN "\n"		\
 			PPC_LONG "1b,4b\n"		\
 			PPC_LONG "2b,4b\n"		\
 		".previous"				\
 		: "=r" (err), "=&r" (x)			\
-		: "b" (addr), "i" (-EFAULT), "0" (err),	\
-		  "i"(sizeof(unsigned long)))
+		: "b" (addr), "i" (-EFAULT), "0" (err))
 #endif /* __powerpc64__ */
 
 #define __get_user_size(x, ptr, size, retval)			\
-- 
cgit v1.2.3


From 76bfdcf71c421154b69470e1ce346c8cf4ee1230 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Thu, 17 Jul 2008 17:17:52 +1000
Subject: powerpc: Use PPC_LONG and PPC_LONG_ALIGN in lib/string.S

Replace ifdef clutter with the PPC_LONG and PPC_LONG_ALIGN macros
for readability.

No change to the generated code.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/lib/string.S | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index 49eb1f1a2bb..64e2e499e32 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -13,13 +13,7 @@
 #include <asm/ppc_asm.h>
 
 	.section __ex_table,"a"
-#ifdef CONFIG_PPC64
-	.align	3
-#define EXTBL	.llong
-#else
-	.align	2
-#define EXTBL	.long
-#endif
+	PPC_LONG_ALIGN
 	.text
 	
 _GLOBAL(strcpy)
@@ -160,9 +154,9 @@ _GLOBAL(__clear_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	11b,90b
-	EXTBL	1b,91b
-	EXTBL	8b,92b
+	PPC_LONG	11b,90b
+	PPC_LONG	1b,91b
+	PPC_LONG	8b,92b
 	.text
 
 _GLOBAL(__strncpy_from_user)
@@ -183,7 +177,7 @@ _GLOBAL(__strncpy_from_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	1b,99b
+	PPC_LONG	1b,99b
 	.text
 
 /* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
@@ -208,4 +202,4 @@ _GLOBAL(__strnlen_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	1b,99b
+	PPC_LONG	1b,99b
-- 
cgit v1.2.3


From bf312ccc04ab09d674cd1b0f228e76201d94483b Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 18 Jul 2008 04:18:28 +1000
Subject: powerpc: Remove duplicate 6xx option in Kconfig

The real option is above in the same Kconfig file.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/Kconfig.cputype | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 90e57e12313..7f651273386 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -86,9 +86,6 @@ config TUNE_CELL
 	  machines. When building a kernel that is supposed to run only
 	  on Cell, you should also select the POWER4_ONLY option.
 
-config 6xx
-	bool
-
 # this is temp to handle compat with arch=ppc
 config 8xx
 	bool
-- 
cgit v1.2.3


From 542a3a3bc9d9c176f7cb332948df1cb8ff91fa64 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 18 Jul 2008 04:18:54 +1000
Subject: powerpc/boot: Change spaces to tabs

For C code spaces versus tabs is just a religious issue,
but for Makefiles it actually matters.

This patch fixes he following errors:
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:166: *** missing separator.  Stop.
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:171: *** missing separator.  Stop.

Since this was inside an ifdef DTC_GENPARSER it was not a problem unless
someone wanted to regenerate the shipped generated files.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 19f83c8f219..14174aa2407 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -163,12 +163,12 @@ quiet_cmd_flex = FLEX    $@
       cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
 
 $(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
-     $(call if_changed,bison)
+	$(call if_changed,bison)
 
 $(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
 
 $(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
-     $(call if_changed,flex)
+	$(call if_changed,flex)
 endif
 
 #############
-- 
cgit v1.2.3


From 79e25bac124a7d1d7bf966f06dd9398a1b5f3d20 Mon Sep 17 00:00:00 2001
From: Torez Smith <lnxtorez@linux.vnet.ibm.com>
Date: Fri, 18 Jul 2008 06:42:07 +1000
Subject: powerpc: Indicate which oprofile counters to use while in compat mode

While running on a system with new hardware and a kernel where the
cpu_specs[] table does not recognize the new hardware, the identify_cpu()
routine will select the default case as it searches through cpu_specs[]
in an attempt to match the real PVR. Once the default case is selected,
non of the oprofile counters and/or fields have been set up or defined.

When identify_cpu() is called once more with the logical PVR, some of
the cpu specific fields are replaced with the exception of the oprofile
related ones. However, in the case where we have actually taken the
default case while searching for the real PVR, we need to tell
oprofile that we are now running in compatibility mode so it can pick up
the correct counters. We do this by setting the oprofile_cpu_type field
to be that taken from the cpu_specs[] for the cpu we are now emulating.

This change will detect that we are now altering the real PVR and determine
if we also need to update the oprofile_cpu_type field.

Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index f7f3c215d06..b936a1dd0a5 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -355,6 +355,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power5+",
 		.platform		= "power5+",
 	},
 	{	/* Power6 */
@@ -386,6 +387,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power6",
 		.platform		= "power6",
 	},
 	{	/* 2.06-compliant processor, i.e. Power7 "architected" mode */
@@ -397,6 +399,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power7",
 		.platform		= "power7",
 	},
 	{	/* Power7 */
@@ -1629,6 +1632,23 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 				t->cpu_setup = s->cpu_setup;
 				t->cpu_restore = s->cpu_restore;
 				t->platform = s->platform;
+				/*
+				 * If we have passed through this logic once
+				 * before and have pulled the default case
+				 * because the real PVR was not found inside
+				 * cpu_specs[], then we are possibly running in
+				 * compatibility mode. In that case, let the
+				 * oprofiler know which set of compatibility
+				 * counters to pull from by making sure the
+				 * oprofile_cpu_type string is set to that of
+				 * compatibility mode. If the oprofile_cpu_type
+				 * already has a value, then we are possibly
+				 * overriding a real PVR with a logical one, and,
+				 * in that case, keep the current value for
+				 * oprofile_cpu_type.
+				 */
+				if (t->oprofile_cpu_type == NULL)
+					t->oprofile_cpu_type = s->oprofile_cpu_type;
 			} else
 				*t = *s;
 			*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
-- 
cgit v1.2.3


From 1ed6af73440c5ec920884bb800685a8cab4ce847 Mon Sep 17 00:00:00 2001
From: Mark Nelson <markn@au1.ibm.com>
Date: Fri, 18 Jul 2008 23:03:34 +1000
Subject: powerpc/cell: Add DMA_ATTR_WEAK_ORDERING dma attribute and use in
 Cell IOMMU code

Introduce a new dma attriblue DMA_ATTR_WEAK_ORDERING to use weak ordering
on DMA mappings in the Cell processor. Add the code to the Cell's IOMMU
implementation to use this code.

Dynamic mappings can be weakly or strongly ordered on an individual basis
but the fixed mapping has to be either completely strong or completely weak.
This is currently decided by a kernel boot option (pass iommu_fixed=weak
for a weakly ordered fixed linear mapping, strongly ordered is the default).

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 Documentation/DMA-attributes.txt    |   9 +++
 arch/powerpc/platforms/cell/iommu.c | 113 ++++++++++++++++++++++++++++++++++--
 include/linux/dma-attrs.h           |   1 +
 3 files changed, 118 insertions(+), 5 deletions(-)

diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt
index 6d772f84b47..b768cc0e402 100644
--- a/Documentation/DMA-attributes.txt
+++ b/Documentation/DMA-attributes.txt
@@ -22,3 +22,12 @@ ready and available in memory.  The DMA of the "completion indication"
 could race with data DMA.  Mapping the memory used for completion
 indications with DMA_ATTR_WRITE_BARRIER would prevent the race.
 
+DMA_ATTR_WEAK_ORDERING
+----------------------
+
+DMA_ATTR_WEAK_ORDERING specifies that reads and writes to the mapping
+may be weakly ordered, that is that reads and writes may pass each other.
+
+Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING,
+those that do not will simply ignore the attribute and exhibit default
+behavior.
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 3b7078453e7..208005ca262 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -199,6 +199,8 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW |
 		(window->ioid & IOPTE_IOID_Mask);
 #endif
+	if (unlikely(dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)))
+		base_pte &= ~IOPTE_SO_RW;
 
 	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
@@ -539,7 +541,9 @@ static struct cbe_iommu *cell_iommu_for_node(int nid)
 static unsigned long cell_dma_direct_offset;
 
 static unsigned long dma_iommu_fixed_base;
-struct dma_mapping_ops dma_iommu_fixed_ops;
+
+/* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
+static int iommu_fixed_is_weak;
 
 static struct iommu_table *cell_get_iommu_table(struct device *dev)
 {
@@ -563,6 +567,98 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev)
 	return &window->table;
 }
 
+/* A coherent allocation implies strong ordering */
+
+static void *dma_fixed_alloc_coherent(struct device *dev, size_t size,
+				      dma_addr_t *dma_handle, gfp_t flag)
+{
+	if (iommu_fixed_is_weak)
+		return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
+					    size, dma_handle,
+					    device_to_mask(dev), flag,
+					    dev->archdata.numa_node);
+	else
+		return dma_direct_ops.alloc_coherent(dev, size, dma_handle,
+						     flag);
+}
+
+static void dma_fixed_free_coherent(struct device *dev, size_t size,
+				    void *vaddr, dma_addr_t dma_handle)
+{
+	if (iommu_fixed_is_weak)
+		iommu_free_coherent(cell_get_iommu_table(dev), size, vaddr,
+				    dma_handle);
+	else
+		dma_direct_ops.free_coherent(dev, size, vaddr, dma_handle);
+}
+
+static dma_addr_t dma_fixed_map_single(struct device *dev, void *ptr,
+				       size_t size,
+				       enum dma_data_direction direction,
+				       struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		return dma_direct_ops.map_single(dev, ptr, size, direction,
+						 attrs);
+	else
+		return iommu_map_single(dev, cell_get_iommu_table(dev), ptr,
+					size, device_to_mask(dev), direction,
+					attrs);
+}
+
+static void dma_fixed_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				   size_t size,
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		dma_direct_ops.unmap_single(dev, dma_addr, size, direction,
+					    attrs);
+	else
+		iommu_unmap_single(cell_get_iommu_table(dev), dma_addr, size,
+				   direction, attrs);
+}
+
+static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg,
+			   int nents, enum dma_data_direction direction,
+			   struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		return dma_direct_ops.map_sg(dev, sg, nents, direction, attrs);
+	else
+		return iommu_map_sg(dev, cell_get_iommu_table(dev), sg, nents,
+				    device_to_mask(dev), direction, attrs);
+}
+
+static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg,
+			       int nents, enum dma_data_direction direction,
+			       struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		dma_direct_ops.unmap_sg(dev, sg, nents, direction, attrs);
+	else
+		iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents, direction,
+			       attrs);
+}
+
+static int dma_fixed_dma_supported(struct device *dev, u64 mask)
+{
+	return mask == DMA_64BIT_MASK;
+}
+
+static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
+
+struct dma_mapping_ops dma_iommu_fixed_ops = {
+	.alloc_coherent = dma_fixed_alloc_coherent,
+	.free_coherent  = dma_fixed_free_coherent,
+	.map_single     = dma_fixed_map_single,
+	.unmap_single   = dma_fixed_unmap_single,
+	.map_sg         = dma_fixed_map_sg,
+	.unmap_sg       = dma_fixed_unmap_sg,
+	.dma_supported  = dma_fixed_dma_supported,
+	.set_dma_mask   = dma_set_mask_and_switch,
+};
+
 static void cell_dma_dev_setup_fixed(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
@@ -919,9 +1015,16 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
 
 	pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
+	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M
 		    | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
 
+	if (iommu_fixed_is_weak)
+		pr_info("IOMMU: Using weak ordering for fixed mapping\n");
+	else {
+		pr_info("IOMMU: Using strong ordering for fixed mapping\n");
+		base_pte |= IOPTE_SO_RW;
+	}
+
 	for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
 		/* Don't touch the dynamic region */
 		ioaddr = uaddr + fbase;
@@ -1037,9 +1140,6 @@ static int __init cell_iommu_fixed_mapping_init(void)
 		cell_iommu_setup_window(iommu, np, dbase, dsize, 0);
 	}
 
-	dma_iommu_fixed_ops = dma_direct_ops;
-	dma_iommu_fixed_ops.set_dma_mask = dma_set_mask_and_switch;
-
 	dma_iommu_ops.set_dma_mask = dma_set_mask_and_switch;
 	set_pci_dma_ops(&dma_iommu_ops);
 
@@ -1053,6 +1153,9 @@ static int __init setup_iommu_fixed(char *str)
 	if (strcmp(str, "off") == 0)
 		iommu_fixed_disabled = 1;
 
+	else if (strcmp(str, "weak") == 0)
+		iommu_fixed_is_weak = 1;
+
 	return 1;
 }
 __setup("iommu_fixed=", setup_iommu_fixed);
diff --git a/include/linux/dma-attrs.h b/include/linux/dma-attrs.h
index 1677e2bfa00..71ad34eca6e 100644
--- a/include/linux/dma-attrs.h
+++ b/include/linux/dma-attrs.h
@@ -12,6 +12,7 @@
  */
 enum dma_attr {
 	DMA_ATTR_WRITE_BARRIER,
+	DMA_ATTR_WEAK_ORDERING,
 	DMA_ATTR_MAX,
 };
 
-- 
cgit v1.2.3


From c134fd868fb5137984ce1b7a58f3f6dd4171615e Mon Sep 17 00:00:00 2001
From: Maxim Shchetynin <maxim@de.ibm.com>
Date: Wed, 16 Jul 2008 05:51:40 +1000
Subject: powerpc/cell/edac: Log a syndrome code in case of correctable error

If correctable error occurs the syndrome code was logged as 0. This patch
lets EDAC to log a correct syndrome code to make problem investigation
easier.

Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/edac/cell_edac.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index b54112ffd28..0e024fe2d8c 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -33,7 +33,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
 {
 	struct cell_edac_priv		*priv = mci->pvt_info;
 	struct csrow_info		*csrow = &mci->csrows[0];
-	unsigned long			address, pfn, offset;
+	unsigned long			address, pfn, offset, syndrome;
 
 	dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n",
 		priv->node, chan, ar);
@@ -44,10 +44,11 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
 		address = (address << 1) | chan;
 	pfn = address >> PAGE_SHIFT;
 	offset = address & ~PAGE_MASK;
+	syndrome = (ar & 0x000000001fe00000ul) >> 21;
 
 	/* TODO: Decoding of the error addresss */
 	edac_mc_handle_ce(mci, csrow->first_page + pfn, offset,
-			  0, 0, chan, "");
+			  syndrome, 0, chan, "");
 }
 
 static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar)
-- 
cgit v1.2.3


From 57a20d8fb0d2a05abe40abd6bb29e3f923721f1b Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 17 Jul 2008 15:05:22 +1000
Subject: fbdev: Teaches offb about palette on radeon r5xx/r6xx

The offb driver already has a collection of hacks to be able to set
the palette on various chips. This adds support for r5xx/r6xx radeons.

This is needed as offb is the only console solution on these currently
and the firmware in some cases sets a really bad color palette. This
fixes using some Radeon X16xx on the Powerstation for example.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/video/offb.c | 192 +++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 142 insertions(+), 50 deletions(-)

diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index d7b3dcc0dc4..e1d9eeb1aea 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -47,6 +47,7 @@ enum {
 	cmap_M3B,		/* ATI Rage Mobility M3 Head B */
 	cmap_radeon,		/* ATI Radeon */
 	cmap_gxt2000,		/* IBM GXT2000 */
+	cmap_avivo,		/* ATI R5xx */
 };
 
 struct offb_par {
@@ -58,26 +59,36 @@ struct offb_par {
 
 struct offb_par default_par;
 
-    /*
-     *  Interface used by the world
-     */
-
-static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-			  u_int transp, struct fb_info *info);
-static int offb_blank(int blank, struct fb_info *info);
-
 #ifdef CONFIG_PPC32
 extern boot_infos_t *boot_infos;
 #endif
 
-static struct fb_ops offb_ops = {
-	.owner		= THIS_MODULE,
-	.fb_setcolreg	= offb_setcolreg,
-	.fb_blank	= offb_blank,
-	.fb_fillrect	= cfb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
-};
+/* Definitions used by the Avivo palette hack */
+#define AVIVO_DC_LUT_RW_SELECT                  0x6480
+#define AVIVO_DC_LUT_RW_MODE                    0x6484
+#define AVIVO_DC_LUT_RW_INDEX                   0x6488
+#define AVIVO_DC_LUT_SEQ_COLOR                  0x648c
+#define AVIVO_DC_LUT_PWL_DATA                   0x6490
+#define AVIVO_DC_LUT_30_COLOR                   0x6494
+#define AVIVO_DC_LUT_READ_PIPE_SELECT           0x6498
+#define AVIVO_DC_LUT_WRITE_EN_MASK              0x649c
+#define AVIVO_DC_LUT_AUTOFILL                   0x64a0
+
+#define AVIVO_DC_LUTA_CONTROL                   0x64c0
+#define AVIVO_DC_LUTA_BLACK_OFFSET_BLUE         0x64c4
+#define AVIVO_DC_LUTA_BLACK_OFFSET_GREEN        0x64c8
+#define AVIVO_DC_LUTA_BLACK_OFFSET_RED          0x64cc
+#define AVIVO_DC_LUTA_WHITE_OFFSET_BLUE         0x64d0
+#define AVIVO_DC_LUTA_WHITE_OFFSET_GREEN        0x64d4
+#define AVIVO_DC_LUTA_WHITE_OFFSET_RED          0x64d8
+
+#define AVIVO_DC_LUTB_CONTROL                   0x6cc0
+#define AVIVO_DC_LUTB_BLACK_OFFSET_BLUE         0x6cc4
+#define AVIVO_DC_LUTB_BLACK_OFFSET_GREEN        0x6cc8
+#define AVIVO_DC_LUTB_BLACK_OFFSET_RED          0x6ccc
+#define AVIVO_DC_LUTB_WHITE_OFFSET_BLUE         0x6cd0
+#define AVIVO_DC_LUTB_WHITE_OFFSET_GREEN        0x6cd4
+#define AVIVO_DC_LUTB_WHITE_OFFSET_RED          0x6cd8
 
     /*
      *  Set a single color register. The values supplied are already
@@ -160,6 +171,17 @@ static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 		out_le32(((unsigned __iomem *) par->cmap_adr) + regno,
 			 (red << 16 | green << 8 | blue));
 		break;
+	case cmap_avivo:
+		/* Write to both LUTs for now */
+		writel(1, par->cmap_adr + AVIVO_DC_LUT_RW_SELECT);
+		writeb(regno, par->cmap_adr + AVIVO_DC_LUT_RW_INDEX);
+		writel(((red) << 22) | ((green) << 12) | ((blue) << 2),
+		       par->cmap_adr + AVIVO_DC_LUT_30_COLOR);
+		writel(0, par->cmap_adr + AVIVO_DC_LUT_RW_SELECT);
+		writeb(regno, par->cmap_adr + AVIVO_DC_LUT_RW_INDEX);
+		writel(((red) << 22) | ((green) << 12) | ((blue) << 2),
+		       par->cmap_adr + AVIVO_DC_LUT_30_COLOR);
+		break;
 	}
 
 	return 0;
@@ -216,12 +238,59 @@ static int offb_blank(int blank, struct fb_info *info)
 				out_le32(((unsigned __iomem *) par->cmap_adr) + i,
 					 0);
 				break;
+			case cmap_avivo:
+				writel(1, par->cmap_adr + AVIVO_DC_LUT_RW_SELECT);
+				writeb(i, par->cmap_adr + AVIVO_DC_LUT_RW_INDEX);
+				writel(0, par->cmap_adr + AVIVO_DC_LUT_30_COLOR);
+				writel(0, par->cmap_adr + AVIVO_DC_LUT_RW_SELECT);
+				writeb(i, par->cmap_adr + AVIVO_DC_LUT_RW_INDEX);
+				writel(0, par->cmap_adr + AVIVO_DC_LUT_30_COLOR);
+				break;
 			}
 	} else
 		fb_set_cmap(&info->cmap, info);
 	return 0;
 }
 
+static int offb_set_par(struct fb_info *info)
+{
+	struct offb_par *par = (struct offb_par *) info->par;
+
+	/* On avivo, initialize palette control */
+	if (par->cmap_type == cmap_avivo) {
+		writel(0, par->cmap_adr + AVIVO_DC_LUTA_CONTROL);
+		writel(0, par->cmap_adr + AVIVO_DC_LUTA_BLACK_OFFSET_BLUE);
+		writel(0, par->cmap_adr + AVIVO_DC_LUTA_BLACK_OFFSET_GREEN);
+		writel(0, par->cmap_adr + AVIVO_DC_LUTA_BLACK_OFFSET_RED);
+		writel(0x0000ffff, par->cmap_adr + AVIVO_DC_LUTA_WHITE_OFFSET_BLUE);
+		writel(0x0000ffff, par->cmap_adr + AVIVO_DC_LUTA_WHITE_OFFSET_GREEN);
+		writel(0x0000ffff, par->cmap_adr + AVIVO_DC_LUTA_WHITE_OFFSET_RED);
+		writel(0, par->cmap_adr + AVIVO_DC_LUTB_CONTROL);
+		writel(0, par->cmap_adr + AVIVO_DC_LUTB_BLACK_OFFSET_BLUE);
+		writel(0, par->cmap_adr + AVIVO_DC_LUTB_BLACK_OFFSET_GREEN);
+		writel(0, par->cmap_adr + AVIVO_DC_LUTB_BLACK_OFFSET_RED);
+		writel(0x0000ffff, par->cmap_adr + AVIVO_DC_LUTB_WHITE_OFFSET_BLUE);
+		writel(0x0000ffff, par->cmap_adr + AVIVO_DC_LUTB_WHITE_OFFSET_GREEN);
+		writel(0x0000ffff, par->cmap_adr + AVIVO_DC_LUTB_WHITE_OFFSET_RED);
+		writel(1, par->cmap_adr + AVIVO_DC_LUT_RW_SELECT);
+		writel(0, par->cmap_adr + AVIVO_DC_LUT_RW_MODE);
+		writel(0x0000003f, par->cmap_adr + AVIVO_DC_LUT_WRITE_EN_MASK);
+		writel(0, par->cmap_adr + AVIVO_DC_LUT_RW_SELECT);
+		writel(0, par->cmap_adr + AVIVO_DC_LUT_RW_MODE);
+		writel(0x0000003f, par->cmap_adr + AVIVO_DC_LUT_WRITE_EN_MASK);
+	}
+	return 0;
+}
+
+static struct fb_ops offb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_setcolreg	= offb_setcolreg,
+	.fb_set_par	= offb_set_par,
+	.fb_blank	= offb_blank,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
 
 static void __iomem *offb_map_reg(struct device_node *np, int index,
 				  unsigned long offset, unsigned long size)
@@ -245,6 +314,59 @@ static void __iomem *offb_map_reg(struct device_node *np, int index,
 	return ioremap(taddr + offset, size);
 }
 
+static void offb_init_palette_hacks(struct fb_info *info, struct device_node *dp,
+				    const char *name, unsigned long address)
+{
+	struct offb_par *par = (struct offb_par *) info->par;
+
+	if (dp && !strncmp(name, "ATY,Rage128", 11)) {
+		par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff);
+		if (par->cmap_adr)
+			par->cmap_type = cmap_r128;
+	} else if (dp && (!strncmp(name, "ATY,RageM3pA", 12)
+			  || !strncmp(name, "ATY,RageM3p12A", 14))) {
+		par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff);
+		if (par->cmap_adr)
+			par->cmap_type = cmap_M3A;
+	} else if (dp && !strncmp(name, "ATY,RageM3pB", 12)) {
+		par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff);
+		if (par->cmap_adr)
+			par->cmap_type = cmap_M3B;
+	} else if (dp && !strncmp(name, "ATY,Rage6", 9)) {
+		par->cmap_adr = offb_map_reg(dp, 1, 0, 0x1fff);
+		if (par->cmap_adr)
+			par->cmap_type = cmap_radeon;
+	} else if (!strncmp(name, "ATY,", 4)) {
+		unsigned long base = address & 0xff000000UL;
+		par->cmap_adr =
+			ioremap(base + 0x7ff000, 0x1000) + 0xcc0;
+		par->cmap_data = par->cmap_adr + 1;
+		par->cmap_type = cmap_m64;
+	} else if (dp && (of_device_is_compatible(dp, "pci1014,b7") ||
+			  of_device_is_compatible(dp, "pci1014,21c"))) {
+		par->cmap_adr = offb_map_reg(dp, 0, 0x6000, 0x1000);
+		if (par->cmap_adr)
+			par->cmap_type = cmap_gxt2000;
+	} else if (dp && !strncmp(name, "vga,Display-", 12)) {
+		/* Look for AVIVO initialized by SLOF */
+		struct device_node *pciparent = of_get_parent(dp);
+		const u32 *vid, *did;
+		vid = of_get_property(pciparent, "vendor-id", NULL);
+		did = of_get_property(pciparent, "device-id", NULL);
+		/* This will match most R5xx */
+		if (vid && did && *vid == 0x1002 &&
+		    ((*did >= 0x7100 && *did < 0x7800) ||
+		     (*did >= 0x9400))) {
+			par->cmap_adr = offb_map_reg(pciparent, 2, 0, 0x10000);
+			if (par->cmap_adr)
+				par->cmap_type = cmap_avivo;
+		}
+		of_node_put(pciparent);
+	}
+	info->fix.visual = (par->cmap_type != cmap_unknown) ?
+		FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_STATIC_PSEUDOCOLOR;
+}
+
 static void __init offb_init_fb(const char *name, const char *full_name,
 				int width, int height, int depth,
 				int pitch, unsigned long address,
@@ -283,6 +405,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 
 	fix = &info->fix;
 	var = &info->var;
+	info->par = par;
 
 	strcpy(fix->id, "OFfb ");
 	strncat(fix->id, name, sizeof(fix->id) - sizeof("OFfb "));
@@ -298,39 +421,9 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 	fix->type_aux = 0;
 
 	par->cmap_type = cmap_unknown;
-	if (depth == 8) {
-		if (dp && !strncmp(name, "ATY,Rage128", 11)) {
-			par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff);
-			if (par->cmap_adr)
-				par->cmap_type = cmap_r128;
-		} else if (dp && (!strncmp(name, "ATY,RageM3pA", 12)
-				  || !strncmp(name, "ATY,RageM3p12A", 14))) {
-			par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff);
-			if (par->cmap_adr)
-				par->cmap_type = cmap_M3A;
-		} else if (dp && !strncmp(name, "ATY,RageM3pB", 12)) {
-			par->cmap_adr = offb_map_reg(dp, 2, 0, 0x1fff);
-			if (par->cmap_adr)
-				par->cmap_type = cmap_M3B;
-		} else if (dp && !strncmp(name, "ATY,Rage6", 9)) {
-			par->cmap_adr = offb_map_reg(dp, 1, 0, 0x1fff);
-			if (par->cmap_adr)
-				par->cmap_type = cmap_radeon;
-		} else if (!strncmp(name, "ATY,", 4)) {
-			unsigned long base = address & 0xff000000UL;
-			par->cmap_adr =
-			    ioremap(base + 0x7ff000, 0x1000) + 0xcc0;
-			par->cmap_data = par->cmap_adr + 1;
-			par->cmap_type = cmap_m64;
-		} else if (dp && (of_device_is_compatible(dp, "pci1014,b7") ||
-				  of_device_is_compatible(dp, "pci1014,21c"))) {
-			par->cmap_adr = offb_map_reg(dp, 0, 0x6000, 0x1000);
-			if (par->cmap_adr)
-				par->cmap_type = cmap_gxt2000;
-		}
-		fix->visual = (par->cmap_type != cmap_unknown) ?
-			FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_STATIC_PSEUDOCOLOR;
-	} else
+	if (depth == 8)
+		offb_init_palette_hacks(info, dp, name, address);
+	else
 		fix->visual = FB_VISUAL_TRUECOLOR;
 
 	var->xoffset = var->yoffset = 0;
@@ -395,7 +488,6 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 
 	info->fbops = &offb_ops;
 	info->screen_base = ioremap(address, fix->smem_len);
-	info->par = par;
 	info->pseudo_palette = (void *) (info + 1);
 	info->flags = FBINFO_DEFAULT | foreign_endian;
 
-- 
cgit v1.2.3


From f36c5227cd88b6340c40d62b05859e8213740a97 Mon Sep 17 00:00:00 2001
From: Mike Mason <mmlnx@us.ibm.com>
Date: Tue, 22 Jul 2008 02:40:17 +1000
Subject: powerpc/eeh: Don't panic when EEH_MAX_FAILS is exceeded

This patch changes the EEH_MAX_FAILS action from panic to printing an
error message.  Panicking under under this condition is too harsh.
Although performance will be affected and the device may not recover,
the system is still running, which at the very least should allow for a
more graceful shutdown. The patch also removes the msleep() within a
spinlock, which can lead to a deadlock and is not recommended.

Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Acked-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/eeh.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index c027f0a70a0..54816d75b57 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -75,9 +75,9 @@
  */
 
 /* If a device driver keeps reading an MMIO register in an interrupt
- * handler after a slot isolation event has occurred, we assume it
- * is broken and panic.  This sets the threshold for how many read
- * attempts we allow before panicking.
+ * handler after a slot isolation event, it might be broken.
+ * This sets the threshold for how many read attempts we allow
+ * before printing an error message.
  */
 #define EEH_MAX_FAILS	2100000
 
@@ -470,6 +470,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	unsigned long flags;
 	struct pci_dn *pdn;
 	int rc = 0;
+	const char *location;
 
 	total_mmio_ffs++;
 
@@ -509,18 +510,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	rc = 1;
 	if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
 		pdn->eeh_check_count ++;
-		if (pdn->eeh_check_count >= EEH_MAX_FAILS) {
-			printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
-			        pdn->eeh_check_count);
+		if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) {
+			location = of_get_property(dn, "ibm,loc-code", NULL);
+			printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
+				"location=%s driver=%s pci addr=%s\n",
+				pdn->eeh_check_count, location,
+				dev->driver->name, pci_name(dev));
+			printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+				dev->driver->name);
 			dump_stack();
-			msleep(5000);
-			
-			/* re-read the slot reset state */
-			if (read_slot_reset_state(pdn, rets) != 0)
-				rets[0] = -1;	/* reset state unknown */
-
-			/* If we are here, then we hit an infinite loop. Stop. */
-			panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev));
 		}
 		goto dn_unlock;
 	}
-- 
cgit v1.2.3


From c69cccc95fe4b90dde5fe33e6a3b77880b534fa4 Mon Sep 17 00:00:00 2001
From: Segher Boessenkool <segher@kernel.crashing.org>
Date: Tue, 22 Jul 2008 09:03:45 +1000
Subject: powerpc: Fix build bug with binutils < 2.18 and GCC < 4.2

binutils < 2.18 has a bug that makes it misbehave when taking an
ELF file with all segments at load address 0 as input.  This
happens when running "strip" on vmlinux, because of the AT() magic
in this linker script.  People using GCC >= 4.2 won't run into
this problem, because the "build-id" support will put some data
into the "notes" segment (at a non-zero load address).

To work around this, we force some data into both the "dummy"
segment and the kernel segment, so the dummy segment will get a
non-zero load address.  It's not enough to always create the
"notes" segment, since if nothing gets assigned to it, its load
address will be zero.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Tested-By: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 87a72c66ce2..a914411bced 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -9,6 +9,25 @@
 
 ENTRY(_stext)
 
+PHDRS {
+	kernel PT_LOAD FLAGS(7); /* RWX */
+	notes PT_NOTE FLAGS(0);
+	dummy PT_NOTE FLAGS(0);
+
+	/* binutils < 2.18 has a bug that makes it misbehave when taking an
+	   ELF file with all segments at load address 0 as input.  This
+	   happens when running "strip" on vmlinux, because of the AT() magic
+	   in this linker script.  People using GCC >= 4.2 won't run into
+	   this problem, because the "build-id" support will put some data
+	   into the "notes" segment (at a non-zero load address).
+
+	   To work around this, we force some data into both the "dummy"
+	   segment and the kernel segment, so the dummy segment will get a
+	   non-zero load address.  It's not enough to always create the
+	   "notes" segment, since if nothing gets assigned to it, its load
+	   address will be zero.  */
+}
+
 #ifdef CONFIG_PPC64
 OUTPUT_ARCH(powerpc:common64)
 jiffies = jiffies_64;
@@ -50,7 +69,7 @@ SECTIONS
 		. = ALIGN(PAGE_SIZE);
 		_etext = .;
 		PROVIDE32 (etext = .);
-	}
+	} :kernel
 
 	/* Read-only data */
 	RODATA
@@ -62,7 +81,13 @@ SECTIONS
 		__stop___ex_table = .;
 	}
 
-	NOTES
+	NOTES :kernel :notes
+
+	/* The dummy segment contents for the bug workaround mentioned above
+	   near PHDRS.  */
+	.dummy : {
+		LONG(0xf177)
+	} :kernel :dummy
 
 /*
  * Init sections discarded at runtime
@@ -74,7 +99,7 @@ SECTIONS
 		_sinittext = .;
 		INIT_TEXT
 		_einittext = .;
-	}
+	} :kernel
 
 	/* .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
-- 
cgit v1.2.3


From b32d13102d39ed411d152a7ffcc5f66d5b3b1b49 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 21 Jul 2008 18:45:34 -0700
Subject: tcp: Fix bitmask test in tcp_syn_options()

As reported by Alexey Dobriyan:

	  CHECK   net/ipv4/tcp_output.c
	net/ipv4/tcp_output.c:475:7: warning: dubious: !x & y

And sparse is damn right!

	if (unlikely(!OPTION_TS & opts->options))
		    ^^^
		size += TCPOLEN_SACKPERM_ALIGNED;

OPTION_TS is (1 << 1), so condition will never trigger.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp_output.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 1fa683c0ba9..a00532de2a8 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -472,7 +472,7 @@ static unsigned tcp_syn_options(struct sock *sk, struct sk_buff *skb,
 	}
 	if (likely(sysctl_tcp_sack)) {
 		opts->options |= OPTION_SACK_ADVERTISE;
-		if (unlikely(!OPTION_TS & opts->options))
+		if (unlikely(!(OPTION_TS & opts->options)))
 			size += TCPOLEN_SACKPERM_ALIGNED;
 	}
 
-- 
cgit v1.2.3


From e105b8bfc769b0545b6f0f395179d1e43cbee822 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Mon, 21 Apr 2008 10:51:07 -0700
Subject: sysfs: add /sys/dev/{char,block} to lookup sysfs path by major:minor

Why?:
There are occasions where userspace would like to access sysfs
attributes for a device but it may not know how sysfs has named the
device or the path.  For example what is the sysfs path for
/dev/disk/by-id/ata-ST3160827AS_5MT004CK?  With this change a call to
stat(2) returns the major:minor then userspace can see that
/sys/dev/block/8:32 links to /sys/block/sdc.

What are the alternatives?:
1/ Add an ioctl to return the path: Doable, but sysfs is meant to reduce
   the need to proliferate ioctl interfaces into the kernel, so this
   seems counter productive.

2/ Use udev to create these symlinks: Also doable, but it adds a
   udev dependency to utilities that might be running in a limited
   environment like an initramfs.

3/ Do a full-tree search of sysfs.

[kay.sievers@vrfy.org: fix duplicate registrations]
[kay.sievers@vrfy.org: cleanup suggestions]

Cc: Neil Brown <neilb@suse.de>
Cc: Tejun Heo <htejun@gmail.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Reviewed-by: SL Baur <steve@xemacs.org>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Mark Lord <lkml@rtr.ca>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/ABI/testing/sysfs-dev | 20 +++++++++
 Documentation/filesystems/sysfs.txt |  6 +++
 block/genhd.c                       |  5 ++-
 drivers/base/class.c                |  4 ++
 drivers/base/core.c                 | 83 ++++++++++++++++++++++++++++++++++++-
 drivers/usb/core/devio.c            |  5 +++
 include/linux/device.h              |  3 ++
 7 files changed, 124 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-dev

diff --git a/Documentation/ABI/testing/sysfs-dev b/Documentation/ABI/testing/sysfs-dev
new file mode 100644
index 00000000000..a9f2b8b0530
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-dev
@@ -0,0 +1,20 @@
+What:		/sys/dev
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Dan Williams <dan.j.williams@intel.com>
+Description:	The /sys/dev tree provides a method to look up the sysfs
+		path for a device using the information returned from
+		stat(2).  There are two directories, 'block' and 'char',
+		beneath /sys/dev containing symbolic links with names of
+		the form "<major>:<minor>".  These links point to the
+		corresponding sysfs path for the given device.
+
+		Example:
+		$ readlink /sys/dev/block/8:32
+		../../block/sdc
+
+		Entries in /sys/dev/char and /sys/dev/block will be
+		dynamically created and destroyed as devices enter and
+		leave the system.
+
+Users:		mdadm <linux-raid@vger.kernel.org>
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 7f27b8f840d..9e9c348275a 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -248,6 +248,7 @@ The top level sysfs directory looks like:
 block/
 bus/
 class/
+dev/
 devices/
 firmware/
 net/
@@ -274,6 +275,11 @@ fs/ contains a directory for some filesystems.  Currently each
 filesystem wanting to export attributes must create its own hierarchy
 below fs/ (see ./fuse.txt for an example).
 
+dev/ contains two directories char/ and block/. Inside these two
+directories there are symlinks named <major>:<minor>.  These symlinks
+point to the sysfs directory for the given device.  /sys/dev provides a
+quick way to lookup the sysfs interface for a device from the result of
+a stat(2) operation.
 
 More information can driver-model specific features can be found in
 Documentation/driver-model/. 
diff --git a/block/genhd.c b/block/genhd.c
index 9074f384b09..24e3fc9095f 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -370,7 +370,10 @@ static struct kobject *base_probe(dev_t devt, int *part, void *data)
 
 static int __init genhd_device_init(void)
 {
-	int error = class_register(&block_class);
+	int error;
+
+	block_class.dev_kobj = sysfs_dev_block_kobj;
+	error = class_register(&block_class);
 	if (unlikely(error))
 		return error;
 	bdev_map = kobj_map_init(base_probe, &block_class_lock);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index e085af0ff94..71ce3ff6bdf 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -148,6 +148,10 @@ int class_register(struct class *cls)
 	if (error)
 		return error;
 
+	/* set the default /sys/dev directory for devices of this class */
+	if (!cls->dev_kobj)
+		cls->dev_kobj = sysfs_dev_char_kobj;
+
 #if defined(CONFIG_SYSFS_DEPRECATED) && defined(CONFIG_BLOCK)
 	/* let the block class directory show up in the root of sysfs */
 	if (cls != &block_class)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index ee0a51a3a41..be9aba4dc2f 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -27,6 +27,9 @@
 
 int (*platform_notify)(struct device *dev) = NULL;
 int (*platform_notify_remove)(struct device *dev) = NULL;
+static struct kobject *dev_kobj;
+struct kobject *sysfs_dev_char_kobj;
+struct kobject *sysfs_dev_block_kobj;
 
 #ifdef CONFIG_BLOCK
 static inline int device_is_not_partition(struct device *dev)
@@ -775,6 +778,54 @@ int dev_set_name(struct device *dev, const char *fmt, ...)
 }
 EXPORT_SYMBOL_GPL(dev_set_name);
 
+/**
+ * device_to_dev_kobj - select a /sys/dev/ directory for the device
+ * @dev: device
+ *
+ * By default we select char/ for new entries.  Setting class->dev_obj
+ * to NULL prevents an entry from being created.  class->dev_kobj must
+ * be set (or cleared) before any devices are registered to the class
+ * otherwise device_create_sys_dev_entry() and
+ * device_remove_sys_dev_entry() will disagree about the the presence
+ * of the link.
+ */
+static struct kobject *device_to_dev_kobj(struct device *dev)
+{
+	struct kobject *kobj;
+
+	if (dev->class)
+		kobj = dev->class->dev_kobj;
+	else
+		kobj = sysfs_dev_char_kobj;
+
+	return kobj;
+}
+
+static int device_create_sys_dev_entry(struct device *dev)
+{
+	struct kobject *kobj = device_to_dev_kobj(dev);
+	int error = 0;
+	char devt_str[15];
+
+	if (kobj) {
+		format_dev_t(devt_str, dev->devt);
+		error = sysfs_create_link(kobj, &dev->kobj, devt_str);
+	}
+
+	return error;
+}
+
+static void device_remove_sys_dev_entry(struct device *dev)
+{
+	struct kobject *kobj = device_to_dev_kobj(dev);
+	char devt_str[15];
+
+	if (kobj) {
+		format_dev_t(devt_str, dev->devt);
+		sysfs_remove_link(kobj, devt_str);
+	}
+}
+
 /**
  * device_add - add device to device hierarchy.
  * @dev: device.
@@ -829,6 +880,10 @@ int device_add(struct device *dev)
 		error = device_create_file(dev, &devt_attr);
 		if (error)
 			goto ueventattrError;
+
+		error = device_create_sys_dev_entry(dev);
+		if (error)
+			goto devtattrError;
 	}
 
 	error = device_add_class_symlinks(dev);
@@ -872,6 +927,9 @@ int device_add(struct device *dev)
  AttrsError:
 	device_remove_class_symlinks(dev);
  SymlinkError:
+	if (MAJOR(dev->devt))
+		device_remove_sys_dev_entry(dev);
+ devtattrError:
 	if (MAJOR(dev->devt))
 		device_remove_file(dev, &devt_attr);
  ueventattrError:
@@ -948,8 +1006,10 @@ void device_del(struct device *dev)
 	device_pm_remove(dev);
 	if (parent)
 		klist_del(&dev->knode_parent);
-	if (MAJOR(dev->devt))
+	if (MAJOR(dev->devt)) {
+		device_remove_sys_dev_entry(dev);
 		device_remove_file(dev, &devt_attr);
+	}
 	if (dev->class) {
 		device_remove_class_symlinks(dev);
 
@@ -1074,7 +1134,25 @@ int __init devices_init(void)
 	devices_kset = kset_create_and_add("devices", &device_uevent_ops, NULL);
 	if (!devices_kset)
 		return -ENOMEM;
+	dev_kobj = kobject_create_and_add("dev", NULL);
+	if (!dev_kobj)
+		goto dev_kobj_err;
+	sysfs_dev_block_kobj = kobject_create_and_add("block", dev_kobj);
+	if (!sysfs_dev_block_kobj)
+		goto block_kobj_err;
+	sysfs_dev_char_kobj = kobject_create_and_add("char", dev_kobj);
+	if (!sysfs_dev_char_kobj)
+		goto char_kobj_err;
+
 	return 0;
+
+ char_kobj_err:
+	kobject_put(sysfs_dev_block_kobj);
+ block_kobj_err:
+	kobject_put(dev_kobj);
+ dev_kobj_err:
+	kset_unregister(devices_kset);
+	return -ENOMEM;
 }
 
 EXPORT_SYMBOL_GPL(device_for_each_child);
@@ -1447,4 +1525,7 @@ void device_shutdown(void)
 			dev->driver->shutdown(dev);
 		}
 	}
+	kobject_put(sysfs_dev_char_kobj);
+	kobject_put(sysfs_dev_block_kobj);
+	kobject_put(dev_kobj);
 }
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 54a350ccd03..6fbc8f5ab80 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1792,6 +1792,11 @@ int __init usb_devio_init(void)
 		usb_classdev_class = NULL;
 		goto out;
 	}
+	/* devices of this class shadow the major:minor of their parent
+	 * device, so clear ->dev_kobj to prevent adding duplicate entries
+	 * to /sys/dev
+	 */
+	usb_classdev_class->dev_kobj = NULL;
 
 	usb_register_notify(&usbdev_nb);
 #endif
diff --git a/include/linux/device.h b/include/linux/device.h
index f71a78d123a..e49aa74f248 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -193,6 +193,7 @@ struct class {
 	struct semaphore	sem; /* locks children, devices, interfaces */
 	struct class_attribute		*class_attrs;
 	struct device_attribute		*dev_attrs;
+	struct kobject			*dev_kobj;
 
 	int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);
 
@@ -205,6 +206,8 @@ struct class {
 	struct pm_ops *pm;
 };
 
+extern struct kobject *sysfs_dev_block_kobj;
+extern struct kobject *sysfs_dev_char_kobj;
 extern int __must_check class_register(struct class *class);
 extern void class_unregister(struct class *class);
 extern int class_for_each_device(struct class *class, void *data,
-- 
cgit v1.2.3


From 9f255651fb41c111ee35a2ae632df8ce9bd61def Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Tue, 6 May 2008 22:24:04 +0200
Subject: kobject: replace '/' with '!' in name

Some (block) devices have a '/' in the name, and need special
handling. Let's have that rule to the core, so we can remove it
from the block class.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 lib/kobject.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/lib/kobject.c b/lib/kobject.c
index dcade0543bd..744401571ed 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -216,13 +216,19 @@ static int kobject_add_internal(struct kobject *kobj)
 static int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
 				  va_list vargs)
 {
-	/* Free the old name, if necessary. */
-	kfree(kobj->name);
+	const char *old_name = kobj->name;
+	char *s;
 
 	kobj->name = kvasprintf(GFP_KERNEL, fmt, vargs);
 	if (!kobj->name)
 		return -ENOMEM;
 
+	/* ewww... some of these buggers have '/' in the name ... */
+	s = strchr(kobj->name, '/');
+	if (s)
+		s[0] = '!';
+
+	kfree(old_name);
 	return 0;
 }
 
-- 
cgit v1.2.3


From ff543332ec5d23833994fca9e7789f067fb51221 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Tue, 20 May 2008 00:06:00 +0200
Subject: debugfs: Add a reference to the debugfs API documentation.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 lib/Kconfig.debug | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index df27132a56f..ba106db5a65 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -74,6 +74,9 @@ config DEBUG_FS
 	  debugging files into.  Enable this option to be able to read and
 	  write to these files.
 
+	  For detailed documentation on the debugfs API, see
+	  Documentation/DocBook/filesystems.
+
 	  If unsure, say N.
 
 config HEADERS_CHECK
-- 
cgit v1.2.3


From 09857e35cdccf2457bb03c6d7595adc210a517cc Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 18:21:38 -0400
Subject: Firmware: fix typo in example code

It's not like this stuff even builds right now, but this will make
Randy's scripts happy :)


Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 samples/firmware_class/firmware_sample_firmware_class.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/samples/firmware_class/firmware_sample_firmware_class.c b/samples/firmware_class/firmware_sample_firmware_class.c
index 9392116e47b..e6cf7a43a29 100644
--- a/samples/firmware_class/firmware_sample_firmware_class.c
+++ b/samples/firmware_class/firmware_sample_firmware_class.c
@@ -124,7 +124,7 @@ static int fw_setup_class_device(struct class_device *class_dev,
 	class_dev->class_id[BUS_ID_SIZE-1] = '\0';
 	class_dev->dev = device;
 
-	class_dev->class = &firmware_class,
+	class_dev->class = &firmware_class;
 	class_set_devdata(class_dev, fw_priv);
 	retval = class_device_register(class_dev);
 	if (retval) {
-- 
cgit v1.2.3


From f79f060561d04a38d41e773ade9baafce3c96179 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: block: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/bsg.c                |  3 ++-
 drivers/block/aoe/aoechr.c |  5 +++--
 drivers/block/paride/pg.c  |  5 +++--
 drivers/block/paride/pt.c  | 10 ++++++----
 drivers/block/pktcdvd.c    |  4 +++-
 5 files changed, 17 insertions(+), 10 deletions(-)

diff --git a/block/bsg.c b/block/bsg.c
index 5fb9b0bdbe8..5a68b09a69b 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -1044,7 +1044,8 @@ int bsg_register_queue(struct request_queue *q, struct device *parent,
 	bcd->release = release;
 	kref_init(&bcd->ref);
 	dev = MKDEV(bsg_major, bcd->minor);
-	class_dev = device_create(bsg_class, parent, dev, "%s", devname);
+	class_dev = device_create_drvdata(bsg_class, parent, dev, NULL,
+					  "%s", devname);
 	if (IS_ERR(class_dev)) {
 		ret = PTR_ERR(class_dev);
 		goto put_dev;
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index d1de68a3192..c04440cd6a3 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -277,8 +277,9 @@ aoechr_init(void)
 		return PTR_ERR(aoe_class);
 	}
 	for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
-		device_create(aoe_class, NULL,
-			      MKDEV(AOE_MAJOR, chardevs[i].minor), chardevs[i].name);
+		device_create_drvdata(aoe_class, NULL,
+				      MKDEV(AOE_MAJOR, chardevs[i].minor),
+				      NULL, chardevs[i].name);
 
 	return 0;
 }
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index 9d92636350e..d731ca42f80 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -686,8 +686,9 @@ static int __init pg_init(void)
 	for (unit = 0; unit < PG_UNITS; unit++) {
 		struct pg *dev = &devices[unit];
 		if (dev->present)
-			device_create(pg_class, NULL, MKDEV(major, unit),
-				      "pg%u", unit);
+			device_create_drvdata(pg_class, NULL,
+					      MKDEV(major, unit), NULL,
+					      "pg%u", unit);
 	}
 	err = 0;
 	goto out;
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
index 5c74c3574a5..673b8b2fd33 100644
--- a/drivers/block/paride/pt.c
+++ b/drivers/block/paride/pt.c
@@ -979,10 +979,12 @@ static int __init pt_init(void)
 
 	for (unit = 0; unit < PT_UNITS; unit++)
 		if (pt[unit].present) {
-			device_create(pt_class, NULL, MKDEV(major, unit),
-				      "pt%d", unit);
-			device_create(pt_class, NULL, MKDEV(major, unit + 128),
-				      "pt%dn", unit);
+			device_create_drvdata(pt_class, NULL,
+					      MKDEV(major, unit), NULL,
+					      "pt%d", unit);
+			device_create_drvdata(pt_class, NULL,
+					      MKDEV(major, unit + 128), NULL,
+					      "pt%dn", unit);
 		}
 	goto out;
 
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 45bee918c46..158eed4d516 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -303,7 +303,9 @@ static struct kobj_type kobj_pkt_type_wqueue = {
 static void pkt_sysfs_dev_new(struct pktcdvd_device *pd)
 {
 	if (class_pktcdvd) {
-		pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, "%s", pd->name);
+		pd->dev = device_create_drvdata(class_pktcdvd, NULL,
+						pd->pkt_dev, NULL,
+						"%s", pd->name);
 		if (IS_ERR(pd->dev))
 			pd->dev = NULL;
 	}
-- 
cgit v1.2.3


From 47aa5793f78c274d51711f6a621fa6b02d4e6402 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: char: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/dsp56k.c                      |  3 ++-
 drivers/char/ip2/ip2main.c                 | 12 ++++++------
 drivers/char/ipmi/ipmi_devintf.c           |  2 +-
 drivers/char/istallion.c                   |  5 +++--
 drivers/char/lp.c                          |  3 ++-
 drivers/char/mem.c                         |  6 +++---
 drivers/char/misc.c                        |  4 ++--
 drivers/char/pcmcia/cm4000_cs.c            |  2 +-
 drivers/char/pcmcia/cm4040_cs.c            |  3 ++-
 drivers/char/ppdev.c                       |  5 +++--
 drivers/char/raw.c                         |  7 ++++---
 drivers/char/snsc.c                        |  3 ++-
 drivers/char/stallion.c                    |  4 ++--
 drivers/char/tty_io.c                      | 12 +++++++-----
 drivers/char/vc_screen.c                   | 12 ++++++------
 drivers/char/viotape.c                     |  8 ++++----
 drivers/char/vt.c                          | 14 ++++++++------
 drivers/char/xilinx_hwicap/xilinx_hwicap.c |  5 +++--
 18 files changed, 61 insertions(+), 49 deletions(-)

diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c
index b9a30c30e2b..33c466a4888 100644
--- a/drivers/char/dsp56k.c
+++ b/drivers/char/dsp56k.c
@@ -500,7 +500,8 @@ static int __init dsp56k_init_driver(void)
 		err = PTR_ERR(dsp56k_class);
 		goto out_chrdev;
 	}
-	device_create(dsp56k_class, NULL, MKDEV(DSP56K_MAJOR, 0), "dsp56k");
+	device_create_drvdata(dsp56k_class, NULL, MKDEV(DSP56K_MAJOR, 0),
+			      NULL, "dsp56k");
 
 	printk(banner);
 	goto out;
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 5dc74404058..9cb48fcd316 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -718,12 +718,12 @@ ip2_loadmain(int *iop, int *irqp)
 			}
 
 			if ( NULL != ( pB = i2BoardPtrTable[i] ) ) {
-				device_create(ip2_class, NULL,
-						MKDEV(IP2_IPL_MAJOR, 4 * i),
-						"ipl%d", i);
-				device_create(ip2_class, NULL,
-						MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
-						"stat%d", i);
+				device_create_drvdata(ip2_class, NULL,
+						      MKDEV(IP2_IPL_MAJOR, 4 * i),
+						      NULL, "ipl%d", i);
+				device_create_drvdata(ip2_class, NULL,
+						      MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
+						      NULL, "stat%d", i);
 
 			    for ( box = 0; box < ABS_MAX_BOXES; ++box )
 			    {
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index c11a4048345..64e1c169e82 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -871,7 +871,7 @@ static void ipmi_new_smi(int if_num, struct device *device)
 	entry->dev = dev;
 
 	mutex_lock(&reg_list_mutex);
-	device_create(ipmi_class, device, dev, "ipmi%d", if_num);
+	device_create_drvdata(ipmi_class, device, dev, NULL, "ipmi%d", if_num);
 	list_add(&entry->link, &reg_list);
 	mutex_unlock(&reg_list_mutex);
 }
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 7930fba4baf..24637bbf02f 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -4599,8 +4599,9 @@ static int __init istallion_module_init(void)
 
 	istallion_class = class_create(THIS_MODULE, "staliomem");
 	for (i = 0; i < 4; i++)
-		device_create(istallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
-			      "staliomem%d", i);
+		device_create_drvdata(istallion_class, NULL,
+				      MKDEV(STL_SIOMEMMAJOR, i),
+				      NULL, "staliomem%d", i);
 
 	return 0;
 err_deinit:
diff --git a/drivers/char/lp.c b/drivers/char/lp.c
index 71abb4c33aa..3f2719b9f77 100644
--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -813,7 +813,8 @@ static int lp_register(int nr, struct parport *port)
 	if (reset)
 		lp_reset(nr);
 
-	device_create(lp_class, port->dev, MKDEV(LP_MAJOR, nr), "lp%d", nr);
+	device_create_drvdata(lp_class, port->dev, MKDEV(LP_MAJOR, nr), NULL,
+			      "lp%d", nr);
 
 	printk(KERN_INFO "lp%d: using %s (%s).\n", nr, port->name, 
 	       (port->irq == PARPORT_IRQ_NONE)?"polling":"interrupt-driven");
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index b6772d65754..c2dba82eb5f 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -989,9 +989,9 @@ static int __init chr_dev_init(void)
 
 	mem_class = class_create(THIS_MODULE, "mem");
 	for (i = 0; i < ARRAY_SIZE(devlist); i++)
-		device_create(mem_class, NULL,
-			      MKDEV(MEM_MAJOR, devlist[i].minor),
-			      devlist[i].name);
+		device_create_drvdata(mem_class, NULL,
+				      MKDEV(MEM_MAJOR, devlist[i].minor),
+				      NULL, devlist[i].name);
 
 	return 0;
 }
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index 6e1563c3d30..999aa779c08 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -217,8 +217,8 @@ int misc_register(struct miscdevice * misc)
 		misc_minors[misc->minor >> 3] |= 1 << (misc->minor & 7);
 	dev = MKDEV(MISC_MAJOR, misc->minor);
 
-	misc->this_device = device_create(misc_class, misc->parent, dev,
-					  "%s", misc->name);
+	misc->this_device = device_create_drvdata(misc_class, misc->parent,
+						  dev, NULL, "%s", misc->name);
 	if (IS_ERR(misc->this_device)) {
 		err = PTR_ERR(misc->this_device);
 		goto out;
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index e4a4fbd37d7..f070ae7bd91 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1896,7 +1896,7 @@ static int cm4000_probe(struct pcmcia_device *link)
 		return ret;
 	}
 
-	device_create(cmm_class, NULL, MKDEV(major, i), "cmm%d", i);
+	device_create_drvdata(cmm_class, NULL, MKDEV(major, i), NULL, "cmm%d", i);
 
 	return 0;
 }
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 6181f8a9b0b..0b5934bef7a 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -653,7 +653,8 @@ static int reader_probe(struct pcmcia_device *link)
 		return ret;
 	}
 
-	device_create(cmx_class, NULL, MKDEV(major, i), "cmx%d", i);
+	device_create_drvdata(cmx_class, NULL, MKDEV(major, i), NULL,
+			      "cmx%d", i);
 
 	return 0;
 }
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index f6e6acadd9a..7af7a7e6b9c 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -752,8 +752,9 @@ static const struct file_operations pp_fops = {
 
 static void pp_attach(struct parport *port)
 {
-	device_create(ppdev_class, port->dev, MKDEV(PP_MAJOR, port->number),
-			"parport%d", port->number);
+	device_create_drvdata(ppdev_class, port->dev,
+			      MKDEV(PP_MAJOR, port->number),
+			      NULL, "parport%d", port->number);
 }
 
 static void pp_detach(struct parport *port)
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index 505fcbe884a..47b8cf281d4 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -131,8 +131,8 @@ raw_ioctl(struct inode *inode, struct file *filp,
 static void bind_device(struct raw_config_request *rq)
 {
 	device_destroy(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor));
-	device_create(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor),
-		      "raw%d", rq->raw_minor);
+	device_create_drvdata(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor),
+			      NULL, "raw%d", rq->raw_minor);
 }
 
 /*
@@ -283,7 +283,8 @@ static int __init raw_init(void)
 		ret = PTR_ERR(raw_class);
 		goto error_region;
 	}
-	device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), "rawctl");
+	device_create_drvdata(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL,
+			      "rawctl");
 
 	return 0;
 
diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
index 0b799ac1b04..3ce60df14c0 100644
--- a/drivers/char/snsc.c
+++ b/drivers/char/snsc.c
@@ -444,7 +444,8 @@ scdrv_init(void)
 				continue;
 			}
 
-			device_create(snsc_class, NULL, dev, "%s", devname);
+			device_create_drvdata(snsc_class, NULL, dev, NULL,
+					      "%s", devname);
 
 			ia64_sn_irtr_intr_enable(scd->scd_nasid,
 						 0 /*ignored */ ,
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 0243efb0be9..45aeeeab9f4 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -4753,8 +4753,8 @@ static int __init stallion_module_init(void)
 	if (IS_ERR(stallion_class))
 		printk("STALLION: failed to create class\n");
 	for (i = 0; i < 4; i++)
-		device_create(stallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
-			      "staliomem%d", i);
+		device_create_drvdata(stallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
+				      NULL, "staliomem%d", i);
 
 	return 0;
 err_unrtty:
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 82f6a8c8633..dc9202d2dd6 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -4045,7 +4045,7 @@ struct device *tty_register_device(struct tty_driver *driver, unsigned index,
 	else
 		tty_line_name(driver, index, name);
 
-	return device_create(tty_class, device, dev, name);
+	return device_create_drvdata(tty_class, device, dev, NULL, name);
 }
 
 /**
@@ -4323,20 +4323,22 @@ static int __init tty_init(void)
 	if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
 	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
 		panic("Couldn't register /dev/tty driver\n");
-	device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), "tty");
+	device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL,
+			      "tty");
 
 	cdev_init(&console_cdev, &console_fops);
 	if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
 	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
 		panic("Couldn't register /dev/console driver\n");
-	device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), "console");
+	device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
+			      "console");
 
 #ifdef CONFIG_UNIX98_PTYS
 	cdev_init(&ptmx_cdev, &ptmx_fops);
 	if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
 	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
 		panic("Couldn't register /dev/ptmx driver\n");
-	device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), "ptmx");
+	device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
 #endif
 
 #ifdef CONFIG_VT
@@ -4344,7 +4346,7 @@ static int __init tty_init(void)
 	if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
 	    register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
 		panic("Couldn't register /dev/tty0 driver\n");
-	device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), "tty0");
+	device_create_drvdata(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
 
 	vty_init();
 #endif
diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c
index eebfad2777d..c2ae52dd53d 100644
--- a/drivers/char/vc_screen.c
+++ b/drivers/char/vc_screen.c
@@ -481,10 +481,10 @@ static struct class *vc_class;
 
 void vcs_make_sysfs(struct tty_struct *tty)
 {
-	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1),
-			"vcs%u", tty->index + 1);
-	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129),
-			"vcsa%u", tty->index + 1);
+	device_create_drvdata(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1),
+			      NULL, "vcs%u", tty->index + 1);
+	device_create_drvdata(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129),
+			      NULL, "vcsa%u", tty->index + 1);
 }
 
 void vcs_remove_sysfs(struct tty_struct *tty)
@@ -499,7 +499,7 @@ int __init vcs_init(void)
 		panic("unable to get major %d for vcs device", VCS_MAJOR);
 	vc_class = class_create(THIS_MODULE, "vc");
 
-	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), "vcs");
-	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), "vcsa");
+	device_create_drvdata(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
+	device_create_drvdata(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
 	return 0;
 }
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index e5da98d8f9c..7a70a40ad63 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -886,10 +886,10 @@ static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	state[i].cur_part = 0;
 	for (j = 0; j < MAX_PARTITIONS; ++j)
 		state[i].part_stat_rwi[j] = VIOT_IDLE;
-	device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i),
-			"iseries!vt%d", i);
-	device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80),
-			"iseries!nvt%d", i);
+	device_create_drvdata(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i),
+			      NULL, "iseries!vt%d", i);
+	device_create_drvdata(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80),
+			      NULL, "iseries!nvt%d", i);
 	printk(VIOTAPE_KERN_INFO "tape iseries/vt%d is iSeries "
 			"resource %10.10s type %4.4s, model %3.3s\n",
 			i, viotape_unitinfo[i].rsrcname,
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 935f1c207a1..e32a076d5f1 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -3425,9 +3425,10 @@ int register_con_driver(const struct consw *csw, int first, int last)
 	if (retval)
 		goto err;
 
-	con_driver->dev = device_create(vtconsole_class, NULL,
-					MKDEV(0, con_driver->node),
-					"vtcon%i", con_driver->node);
+	con_driver->dev = device_create_drvdata(vtconsole_class, NULL,
+						MKDEV(0, con_driver->node),
+						NULL, "vtcon%i",
+						con_driver->node);
 
 	if (IS_ERR(con_driver->dev)) {
 		printk(KERN_WARNING "Unable to create device for %s; "
@@ -3535,9 +3536,10 @@ static int __init vtconsole_class_init(void)
 		struct con_driver *con = &registered_con_driver[i];
 
 		if (con->con && !con->dev) {
-			con->dev = device_create(vtconsole_class, NULL,
-						 MKDEV(0, con->node),
-						 "vtcon%i", con->node);
+			con->dev = device_create_drvdata(vtconsole_class, NULL,
+							 MKDEV(0, con->node),
+							 NULL, "vtcon%i",
+							 con->node);
 
 			if (IS_ERR(con->dev)) {
 				printk(KERN_WARNING "Unable to create "
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 1e1b81e57cd..51966ccf4ea 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -658,8 +658,9 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 		dev_err(dev, "cdev_add() failed\n");
 		goto failed3;
 	}
-	/*  devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */
-	device_create(icap_class, dev, devt, "%s%d", DRIVER_NAME, id);
+
+	device_create_drvdata(icap_class, dev, devt, NULL,
+			      "%s%d", DRIVER_NAME, id);
 	return 0;		/* success */
 
  failed3:
-- 
cgit v1.2.3


From 6143b599700f7d6d7961e2de88f1486b2b19b1f2 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: coda: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 fs/coda/psdev.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index e3eb3556622..40c36f7352a 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -362,8 +362,9 @@ static int init_coda_psdev(void)
 		goto out_chrdev;
 	}		
 	for (i = 0; i < MAX_CODADEVS; i++)
-		device_create(coda_psdev_class, NULL,
-			      MKDEV(CODA_PSDEV_MAJOR,i), "cfs%d", i);
+		device_create_drvdata(coda_psdev_class, NULL,
+				      MKDEV(CODA_PSDEV_MAJOR, i),
+				      NULL, "cfs%d", i);
 	coda_sysctl_init();
 	goto out;
 
-- 
cgit v1.2.3


From 275e64decc01acf4d2f6b6ad1b83f1c4bd9033e5 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: dca: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/dca/dca-sysfs.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/dca/dca-sysfs.c b/drivers/dca/dca-sysfs.c
index 011328faa5f..9a70377bfb3 100644
--- a/drivers/dca/dca-sysfs.c
+++ b/drivers/dca/dca-sysfs.c
@@ -14,8 +14,9 @@ int dca_sysfs_add_req(struct dca_provider *dca, struct device *dev, int slot)
 {
 	struct device *cd;
 
-	cd = device_create(dca_class, dca->cd, MKDEV(0, slot + 1),
-			   "requester%d", slot);
+	cd = device_create_drvdata(dca_class, dca->cd,
+				   MKDEV(0, slot + 1), NULL,
+				   "requester%d", slot);
 	if (IS_ERR(cd))
 		return PTR_ERR(cd);
 	return 0;
@@ -46,7 +47,8 @@ idr_try_again:
 		return err;
 	}
 
-	cd = device_create(dca_class, dev, MKDEV(0, 0), "dca%d", dca->id);
+	cd = device_create_drvdata(dca_class, dev, MKDEV(0, 0), NULL,
+				   "dca%d", dca->id);
 	if (IS_ERR(cd)) {
 		spin_lock(&dca_idr_lock);
 		idr_remove(&dca_idr, dca->id);
-- 
cgit v1.2.3


From e282959ef3ebae0d72ac0b24242c376fa34da585 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: dvb: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/media/dvb/dvb-core/dvbdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index e208a60c048..e7132770a3b 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -233,9 +233,9 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 
 	mutex_unlock(&dvbdev_register_lock);
 
-	clsdev = device_create(dvb_class, adap->device,
+	clsdev = device_create_drvdata(dvb_class, adap->device,
 			       MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
-			       "dvb%d.%s%d", adap->num, dnames[type], id);
+			       NULL, "dvb%d.%s%d", adap->num, dnames[type], id);
 	if (IS_ERR(clsdev)) {
 		printk(KERN_ERR "%s: failed to create device dvb%d.%s%d (%ld)\n",
 		       __func__, adap->num, dnames[type], id, PTR_ERR(clsdev));
-- 
cgit v1.2.3


From 1e2744011ff3cd195aba9f7a15dd71b332812a5c Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: framebuffer: convert device_create to
 device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/video/console/fbcon.c | 3 ++-
 drivers/video/fbmem.c         | 5 +++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 97aff8db10b..4be3b46c069 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -3586,7 +3586,8 @@ static int __init fb_console_init(void)
 
 	acquire_console_sem();
 	fb_register_client(&fbcon_event_notifier);
-	fbcon_device = device_create(fb_class, NULL, MKDEV(0, 0), "fbcon");
+	fbcon_device = device_create_drvdata(fb_class, NULL, MKDEV(0, 0),
+					     NULL, "fbcon");
 
 	if (IS_ERR(fbcon_device)) {
 		printk(KERN_WARNING "Unable to create device "
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 33ebdb198da..1cd5071e536 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1439,8 +1439,9 @@ register_framebuffer(struct fb_info *fb_info)
 			break;
 	fb_info->node = i;
 
-	fb_info->dev = device_create(fb_class, fb_info->device,
-				     MKDEV(FB_MAJOR, i), "fb%d", i);
+	fb_info->dev = device_create_drvdata(fb_class, fb_info->device,
+					     MKDEV(FB_MAJOR, i), NULL,
+					     "fb%d", i);
 	if (IS_ERR(fb_info->dev)) {
 		/* Not fatal */
 		printk(KERN_WARNING "Unable to create device for framebuffer %d; errno = %ld\n", i, PTR_ERR(fb_info->dev));
-- 
cgit v1.2.3


From 0fd15a18d876a9571cc5b88a5d1716dfccb8e493 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: hid: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/hid/hidraw.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 2fde6c63f47..0c6b4d4e7e2 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -322,8 +322,9 @@ int hidraw_connect(struct hid_device *hid)
 		goto out;
 	}
 
-	dev->dev = device_create(hidraw_class, NULL, MKDEV(hidraw_major, minor),
-				"%s%d", "hidraw", minor);
+	dev->dev = device_create_drvdata(hidraw_class, NULL,
+					 MKDEV(hidraw_major, minor), NULL,
+					 "%s%d", "hidraw", minor);
 
 	if (IS_ERR(dev->dev)) {
 		spin_lock(&minors_lock);
-- 
cgit v1.2.3


From 2871f55237e2aaa00fd724ce45b47e567974045f Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: hwmon: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/hwmon/hwmon.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 3db28450a3b..7321a88a511 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -55,7 +55,8 @@ again:
 		return ERR_PTR(err);
 
 	id = id & MAX_ID_MASK;
-	hwdev = device_create(hwmon_class, dev, MKDEV(0,0), HWMON_ID_FORMAT, id);
+	hwdev = device_create_drvdata(hwmon_class, dev, MKDEV(0, 0), NULL,
+				      HWMON_ID_FORMAT, id);
 
 	if (IS_ERR(hwdev)) {
 		spin_lock(&idr_lock);
-- 
cgit v1.2.3


From 1cc4376c259d1950817aaa6221aad7c2058df4a8 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: i2c: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/i2c/i2c-dev.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 86727fa8858..9d55c6383b2 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -521,9 +521,9 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap)
 		return PTR_ERR(i2c_dev);
 
 	/* register this i2c device with the driver core */
-	i2c_dev->dev = device_create(i2c_dev_class, &adap->dev,
-				     MKDEV(I2C_MAJOR, adap->nr),
-				     "i2c-%d", adap->nr);
+	i2c_dev->dev = device_create_drvdata(i2c_dev_class, &adap->dev,
+					     MKDEV(I2C_MAJOR, adap->nr),
+					     NULL, "i2c-%d", adap->nr);
 	if (IS_ERR(i2c_dev->dev)) {
 		res = PTR_ERR(i2c_dev->dev);
 		goto error;
-- 
cgit v1.2.3


From 6ecaaf94b831827405613ee9110d8fb8eff92482 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: ide: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/ide/ide-tape.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index b711ab96e28..353dd11b928 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2697,10 +2697,12 @@ static int ide_tape_probe(ide_drive_t *drive)
 
 	idetape_setup(drive, tape, minor);
 
-	device_create(idetape_sysfs_class, &drive->gendev,
-		      MKDEV(IDETAPE_MAJOR, minor), "%s", tape->name);
-	device_create(idetape_sysfs_class, &drive->gendev,
-			MKDEV(IDETAPE_MAJOR, minor + 128), "n%s", tape->name);
+	device_create_drvdata(idetape_sysfs_class, &drive->gendev,
+			      MKDEV(IDETAPE_MAJOR, minor), NULL,
+			      "%s", tape->name);
+	device_create_drvdata(idetape_sysfs_class, &drive->gendev,
+			      MKDEV(IDETAPE_MAJOR, minor + 128), NULL,
+			      "n%s", tape->name);
 
 	g->fops = &idetape_block_ops;
 	ide_register_region(g);
-- 
cgit v1.2.3


From f71674a09f374bb0b5371b3e7b943029867477c5 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: ieee1394: convert device_create to
 device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Ben Collins <ben.collins@ubuntu.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/ieee1394/dv1394.c    | 7 ++++---
 drivers/ieee1394/raw1394.c   | 4 ++--
 drivers/ieee1394/video1394.c | 6 +++---
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index 9d19aec5820..b6eb2cf2591 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -2296,9 +2296,10 @@ static void dv1394_add_host(struct hpsb_host *host)
 
 	ohci = (struct ti_ohci *)host->hostdata;
 
-	device_create(hpsb_protocol_class, NULL, MKDEV(
-		IEEE1394_MAJOR,	IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)),
-		"dv1394-%d", id);
+	device_create_drvdata(hpsb_protocol_class, NULL,
+			      MKDEV(IEEE1394_MAJOR,
+				    IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)), NULL,
+			      "dv1394-%d", id);
 
 	dv1394_init(ohci, DV1394_NTSC, MODE_RECEIVE);
 	dv1394_init(ohci, DV1394_NTSC, MODE_TRANSMIT);
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index 96f2847b040..6fa9e4a2184 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -3010,10 +3010,10 @@ static int __init init_raw1394(void)
 	hpsb_register_highlevel(&raw1394_highlevel);
 
 	if (IS_ERR
-	    (device_create(
+	    (device_create_drvdata(
 	      hpsb_protocol_class, NULL,
 	      MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16),
-	      RAW1394_DEVICE_NAME))) {
+	      NULL, RAW1394_DEVICE_NAME))) {
 		ret = -EFAULT;
 		goto out_unreg;
 	}
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 069b9f6bf16..25db6e67fa4 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -1341,9 +1341,9 @@ static void video1394_add_host (struct hpsb_host *host)
 	hpsb_set_hostinfo_key(&video1394_highlevel, host, ohci->host->id);
 
 	minor = IEEE1394_MINOR_BLOCK_VIDEO1394 * 16 + ohci->host->id;
-	device_create(hpsb_protocol_class, NULL,
-		      MKDEV(IEEE1394_MAJOR, minor),
-		      "%s-%d", VIDEO1394_DRIVER_NAME, ohci->host->id);
+	device_create_drvdata(hpsb_protocol_class, NULL,
+			      MKDEV(IEEE1394_MAJOR, minor), NULL,
+			      "%s-%d", VIDEO1394_DRIVER_NAME, ohci->host->id);
 }
 
 
-- 
cgit v1.2.3


From c76d3d28c31a68f45d6b5acaa4813138dd7883b3 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: infiniband: convert device_create to
 device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/infiniband/hw/ipath/ipath_file_ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 35f301c88b5..56c0eda3c07 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -2455,7 +2455,7 @@ static int init_cdev(int minor, char *name, const struct file_operations *fops,
 		goto err_cdev;
 	}
 
-	device = device_create(ipath_class, NULL, dev, name);
+	device = device_create_drvdata(ipath_class, NULL, dev, NULL, name);
 
 	if (IS_ERR(device)) {
 		ret = PTR_ERR(device);
-- 
cgit v1.2.3


From 24d0b416f988fcdfa2615a25c7c33c21cc2a65a9 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: isdn: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/isdn/capi/capi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 8a35029caca..0dcfbfba9d3 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1552,7 +1552,8 @@ static int __init capi_init(void)
 		return PTR_ERR(capi_class);
 	}
 
-	device_create(capi_class, NULL, MKDEV(capi_major, 0), "capi");
+	device_create_drvdata(capi_class, NULL, MKDEV(capi_major, 0), NULL,
+			      "capi");
 
 #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
 	if (capinc_tty_init() < 0) {
-- 
cgit v1.2.3


From 97cd790e3a9cf2855676a461ac5c448f5843017d Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: macintosh: convert device_create to
 device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/macintosh/adb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index e5d446804d3..cae52485208 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -862,7 +862,8 @@ adbdev_init(void)
 	adb_dev_class = class_create(THIS_MODULE, "adb");
 	if (IS_ERR(adb_dev_class))
 		return;
-	device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), "adb");
+	device_create_drvdata(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), NULL,
+			      "adb");
 
 	platform_device_register(&adb_pfdev);
 	platform_driver_probe(&adb_pfdrv, adb_dummy_probe);
-- 
cgit v1.2.3


From 43f98747d48195d92c4102c17d7175bf24df1801 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: mips: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/mips/kernel/rtlx.c             | 4 ++--
 arch/mips/sibyte/common/sb_tbprof.c | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index b5564196123..dfd868b6836 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -522,8 +522,8 @@ static int __init rtlx_module_init(void)
 		atomic_set(&channel_wqs[i].in_open, 0);
 		mutex_init(&channel_wqs[i].mutex);
 
-		dev = device_create(mt_class, NULL, MKDEV(major, i),
-		                    "%s%d", module_name, i);
+		dev = device_create_drvdata(mt_class, NULL, MKDEV(major, i),
+					    NULL, "%s%d", module_name, i);
 		if (IS_ERR(dev)) {
 			err = PTR_ERR(dev);
 			goto out_chrdev;
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 28b012ab8dc..66e3e3fb311 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -576,7 +576,8 @@ static int __init sbprof_tb_init(void)
 
 	tb_class = tbc;
 
-	dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
+	dev = device_create_drvdata(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0),
+				    NULL, "tb");
 	if (IS_ERR(dev)) {
 		err = PTR_ERR(dev);
 		goto out_class;
-- 
cgit v1.2.3


From 7da5a05dd7b95315af49f724f623bbfdab0f5e4d Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: misc: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/misc/phantom.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 18616247009..4ce3bdc2f95 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -399,8 +399,9 @@ static int __devinit phantom_probe(struct pci_dev *pdev,
 		goto err_irq;
 	}
 
-	if (IS_ERR(device_create(phantom_class, &pdev->dev, MKDEV(phantom_major,
-			minor), "phantom%u", minor)))
+	if (IS_ERR(device_create_drvdata(phantom_class, &pdev->dev,
+					 MKDEV(phantom_major, minor),
+					 NULL, "phantom%u", minor)))
 		dev_err(&pdev->dev, "can't create device\n");
 
 	pci_set_drvdata(pdev, pht);
-- 
cgit v1.2.3


From daea34bc6f67cf3872d1b52ba5ccf249f3ceb176 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: mtd: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/mtd/mtdchar.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 129d429cd2d..aef9f4b687c 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -28,10 +28,13 @@ static void mtd_notify_add(struct mtd_info* mtd)
 	if (!mtd)
 		return;
 
-	device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2), "mtd%d", mtd->index);
+	device_create_drvdata(mtd_class, NULL,
+			      MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
+			      NULL, "mtd%d", mtd->index);
 
-	device_create(mtd_class, NULL,
-		      MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1), "mtd%dro", mtd->index);
+	device_create_drvdata(mtd_class, NULL,
+			      MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
+			      NULL, "mtd%dro", mtd->index);
 }
 
 static void mtd_notify_remove(struct mtd_info* mtd)
-- 
cgit v1.2.3


From e17da9c4c5fc19e16ddcb0ae020ee4425ca0c96f Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: net: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/net/ppp_generic.c | 3 ++-
 drivers/net/wan/cosa.c    | 6 +++---
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 6b1d7a8edf1..739b3ab7bcc 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -866,7 +866,8 @@ static int __init ppp_init(void)
 			err = PTR_ERR(ppp_class);
 			goto out_chrdev;
 		}
-		device_create(ppp_class, NULL, MKDEV(PPP_MAJOR, 0), "ppp");
+		device_create_drvdata(ppp_class, NULL, MKDEV(PPP_MAJOR, 0),
+				      NULL, "ppp");
 	}
 
 out:
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 5827324e9d9..f7d3349dc3e 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -397,9 +397,9 @@ static int __init cosa_init(void)
 		err = PTR_ERR(cosa_class);
 		goto out_chrdev;
 	}
-	for (i=0; i<nr_cards; i++) {
-		device_create(cosa_class, NULL, MKDEV(cosa_major, i), "cosa%d", i);
-	}
+	for (i = 0; i < nr_cards; i++)
+		device_create_drvdata(cosa_class, NULL, MKDEV(cosa_major, i),
+				      NULL, "cosa%d", i);
 	err = 0;
 	goto out;
 	
-- 
cgit v1.2.3


From 05675de250c4efcefbd488e6a556639b63898af8 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: s390: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/s390/char/raw3270.c    | 14 ++++++++------
 drivers/s390/char/tape_class.c |  7 +++----
 drivers/s390/char/vmur.c       |  5 +++--
 3 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 81a96e01908..c3dee900a5c 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -1168,17 +1168,19 @@ static int raw3270_create_attributes(struct raw3270 *rp)
 	if (rc)
 		goto out;
 
-	rp->clttydev = device_create(class3270, &rp->cdev->dev,
-				     MKDEV(IBM_TTY3270_MAJOR, rp->minor),
-				     "tty%s", rp->cdev->dev.bus_id);
+	rp->clttydev = device_create_drvdata(class3270, &rp->cdev->dev,
+					     MKDEV(IBM_TTY3270_MAJOR, rp->minor),
+					     NULL,
+					     "tty%s", rp->cdev->dev.bus_id);
 	if (IS_ERR(rp->clttydev)) {
 		rc = PTR_ERR(rp->clttydev);
 		goto out_ttydev;
 	}
 
-	rp->cltubdev = device_create(class3270, &rp->cdev->dev,
-				     MKDEV(IBM_FS3270_MAJOR, rp->minor),
-				     "tub%s", rp->cdev->dev.bus_id);
+	rp->cltubdev = device_create_drvdata(class3270, &rp->cdev->dev,
+					     MKDEV(IBM_FS3270_MAJOR, rp->minor),
+					     NULL,
+					     "tub%s", rp->cdev->dev.bus_id);
 	if (!IS_ERR(rp->cltubdev))
 		goto out;
 
diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c
index 6dfdb7c1798..12c2a5aaf31 100644
--- a/drivers/s390/char/tape_class.c
+++ b/drivers/s390/char/tape_class.c
@@ -69,10 +69,9 @@ struct tape_class_device *register_tape_dev(
 	if (rc)
 		goto fail_with_cdev;
 
-	tcd->class_device = device_create(tape_class, device,
-					  tcd->char_device->dev,
-					  "%s", tcd->device_name
-			);
+	tcd->class_device = device_create_drvdata(tape_class, device,
+						  tcd->char_device->dev,
+						  NULL, "%s", tcd->device_name);
 	rc = IS_ERR(tcd->class_device) ? PTR_ERR(tcd->class_device) : 0;
 	if (rc)
 		goto fail_with_cdev;
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index b0ac44b2712..c1f352b8486 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -896,8 +896,9 @@ static int ur_set_online(struct ccw_device *cdev)
 		goto fail_free_cdev;
 	}
 
-	urd->device = device_create(vmur_class, NULL, urd->char_device->dev,
-					"%s", node_id);
+	urd->device = device_create_drvdata(vmur_class, NULL,
+					    urd->char_device->dev, NULL,
+					    "%s", node_id);
 	if (IS_ERR(urd->device)) {
 		rc = PTR_ERR(urd->device);
 		TRACE("ur_set_online: device_create rc=%d\n", rc);
-- 
cgit v1.2.3


From 9def0b9761ee096c3c539b427dfb1e52b373cdad Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: scsi: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/scsi/dpt_i2o.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 2bc30e32b67..1fe0901e811 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -271,8 +271,8 @@ rebuild_sys_tab:
 		pHba->initialized = TRUE;
 		pHba->state &= ~DPTI_STATE_RESET;
 		if (adpt_sysfs_class) {
-			struct device *dev = device_create(adpt_sysfs_class,
-				NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit),
+			struct device *dev = device_create_drvdata(adpt_sysfs_class,
+				NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit), NULL,
 				"dpti%d", pHba->unit);
 			if (IS_ERR(dev)) {
 				printk(KERN_WARNING"dpti%d: unable to "
-- 
cgit v1.2.3


From 89409211ff97bf82295d1fb98ab18302a03e9199 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: sound: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 sound/core/init.c     |  5 +++--
 sound/oss/soundcard.c | 14 ++++++++------
 sound/sound_core.c    |  5 +++--
 3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/sound/core/init.c b/sound/core/init.c
index 5c254d498ae..df46bbc25dc 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -548,8 +548,9 @@ int snd_card_register(struct snd_card *card)
 	snd_assert(card != NULL, return -EINVAL);
 #ifndef CONFIG_SYSFS_DEPRECATED
 	if (!card->card_dev) {
-		card->card_dev = device_create(sound_class, card->dev, 0,
-					       "card%i", card->number);
+		card->card_dev = device_create_drvdata(sound_class, card->dev,
+						       MKDEV(0, 0), NULL,
+						       "card%i", card->number);
 		if (IS_ERR(card->card_dev))
 			card->card_dev = NULL;
 	}
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
index a9c23b2502a..7d89c081a08 100644
--- a/sound/oss/soundcard.c
+++ b/sound/oss/soundcard.c
@@ -560,17 +560,19 @@ static int __init oss_init(void)
 	sound_dmap_flag = (dmabuf > 0 ? 1 : 0);
 
 	for (i = 0; i < ARRAY_SIZE(dev_list); i++) {
-		device_create(sound_class, NULL,
-			      MKDEV(SOUND_MAJOR, dev_list[i].minor),
-			      "%s", dev_list[i].name);
+		device_create_drvdata(sound_class, NULL,
+				      MKDEV(SOUND_MAJOR, dev_list[i].minor),
+				      NULL, "%s", dev_list[i].name);
 
 		if (!dev_list[i].num)
 			continue;
 
 		for (j = 1; j < *dev_list[i].num; j++)
-			device_create(sound_class, NULL,
-				      MKDEV(SOUND_MAJOR, dev_list[i].minor + (j*0x10)),
-				      "%s%d", dev_list[i].name, j);
+			device_create_drvdata(sound_class, NULL,
+					      MKDEV(SOUND_MAJOR,
+						    dev_list[i].minor + (j*0x10)),
+					      NULL,
+					      "%s%d", dev_list[i].name, j);
 	}
 
 	if (sound_nblocks >= 1024)
diff --git a/sound/sound_core.c b/sound/sound_core.c
index dcfc1d5ce63..1b04259a432 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -171,8 +171,9 @@ static int sound_insert_unit(struct sound_unit **list, const struct file_operati
 	else
 		sprintf(s->name, "sound/%s%d", name, r / SOUND_STEP);
 
-	device_create(sound_class, dev, MKDEV(SOUND_MAJOR, s->unit_minor),
-		      s->name+6);
+	device_create_drvdata(sound_class, dev,
+			      MKDEV(SOUND_MAJOR, s->unit_minor),
+			      NULL, s->name+6);
 	return r;
 
  fail:
-- 
cgit v1.2.3


From 3d81252ddb10f63ae4db713d9b32faabe641b850 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Fri, 6 Jun 2008 15:48:07 -0500
Subject: device create: spi: convert device_create to device_create_drvdata

Switch over to use the shiny new device_create_drvdata() call
instead of the original device_create() calls, so this continues
to work after device_create() is  removed.

Note that this driver never had the race which motivated removing
the original call; it locked correctly.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/spi/spidev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index ddbe1a5e970..2833fd772a2 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -576,7 +576,8 @@ static int spidev_probe(struct spi_device *spi)
 		struct device *dev;
 
 		spidev->devt = MKDEV(SPIDEV_MAJOR, minor);
-		dev = device_create(spidev_class, &spi->dev, spidev->devt,
+		dev = device_create_drvdata(spidev_class, &spi->dev,
+				spidev->devt, spidev,
 				"spidev%d.%d",
 				spi->master->bus_num, spi->chip_select);
 		status = IS_ERR(dev) ? PTR_ERR(dev) : 0;
@@ -586,7 +587,6 @@ static int spidev_probe(struct spi_device *spi)
 	}
 	if (status == 0) {
 		set_bit(minor, minors);
-		spi_set_drvdata(spi, spidev);
 		list_add(&spidev->device_entry, &device_list);
 	}
 	mutex_unlock(&device_list_lock);
-- 
cgit v1.2.3


From bc00bc924295f02295fe5eeeba3618ba0d0db1ef Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: usb: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/devio.c     | 6 +++---
 drivers/usb/core/file.c      | 5 +++--
 drivers/usb/gadget/printer.c | 4 ++--
 drivers/usb/mon/mon_bin.c    | 5 +++--
 4 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 6fbc8f5ab80..20290c5b156 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1729,9 +1729,9 @@ static int usb_classdev_add(struct usb_device *dev)
 {
 	struct device *cldev;
 
-	cldev = device_create(usb_classdev_class, &dev->dev, dev->dev.devt,
-			      "usbdev%d.%d", dev->bus->busnum,
-			      dev->devnum);
+	cldev = device_create_drvdata(usb_classdev_class, &dev->dev,
+				      dev->dev.devt, NULL, "usbdev%d.%d",
+				      dev->bus->busnum, dev->devnum);
 	if (IS_ERR(cldev))
 		return PTR_ERR(cldev);
 	dev->usb_classdev = cldev;
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 913fb866789..6b1b229e38c 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -196,8 +196,9 @@ int usb_register_dev(struct usb_interface *intf,
 		++temp;
 	else
 		temp = name;
-	intf->usb_dev = device_create(usb_class->class, &intf->dev,
-				      MKDEV(USB_MAJOR, minor), "%s", temp);
+	intf->usb_dev = device_create_drvdata(usb_class->class, &intf->dev,
+					      MKDEV(USB_MAJOR, minor), NULL,
+					      "%s", temp);
 	if (IS_ERR(intf->usb_dev)) {
 		down_write(&minor_rwsem);
 		usb_minors[intf->minor] = NULL;
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 9caaec3ae9a..49cd9e145a9 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -1360,8 +1360,8 @@ printer_bind(struct usb_gadget *gadget)
 
 
 	/* Setup the sysfs files for the printer gadget. */
-	dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
-			"g_printer");
+	dev->pdev = device_create_drvdata(usb_gadget_class, NULL,
+					  g_printer_devno, NULL, "g_printer");
 	if (IS_ERR(dev->pdev)) {
 		ERROR(dev, "Failed to create device: g_printer\n");
 		goto fail;
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 293a46247c3..6566fc0a322 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1162,8 +1162,9 @@ int mon_bin_add(struct mon_bus *mbus, const struct usb_bus *ubus)
 	if (minor >= MON_BIN_MAX_MINOR)
 		return 0;
 
-	dev = device_create(mon_bin_class, ubus? ubus->controller: NULL,
-			MKDEV(MAJOR(mon_bin_dev0), minor), "usbmon%d", minor);
+	dev = device_create_drvdata(mon_bin_class, ubus? ubus->controller: NULL,
+				    MKDEV(MAJOR(mon_bin_dev0), minor), NULL,
+				    "usbmon%d", minor);
 	if (IS_ERR(dev))
 		return 0;
 
-- 
cgit v1.2.3


From 3bfd49c8ab1859ae0f5fa1df2b3781c99115f442 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: device create: x86: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/x86/kernel/cpuid.c | 4 ++--
 arch/x86/kernel/msr.c   | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 2de5fa2bbf7..14b11b3be31 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -141,8 +141,8 @@ static __cpuinit int cpuid_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
-			    "cpu%d", cpu);
+	dev = device_create_drvdata(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
+				    NULL, "cpu%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index a153b3905f6..9fd80955244 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -149,8 +149,8 @@ static int __cpuinit msr_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
-			    "msr%d", cpu);
+	dev = device_create_drvdata(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
+				    NULL, "msr%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
-- 
cgit v1.2.3


From ccea44fadca396b0f89aed5bdeb60e4abb212566 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 21 May 2008 12:52:33 -0700
Subject: driver core: remove device_create()

There are no more users of this, and it is racy.  Use
device_create_drvdata() or device_create_vargs() instead.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/core.c    | 34 ----------------------------------
 include/linux/device.h |  3 ---
 2 files changed, 37 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index be9aba4dc2f..4dc0d272f6d 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1273,40 +1273,6 @@ struct device *device_create_drvdata(struct class *class,
 }
 EXPORT_SYMBOL_GPL(device_create_drvdata);
 
-/**
- * device_create - creates a device and registers it with sysfs
- * @class: pointer to the struct class that this device should be registered to
- * @parent: pointer to the parent struct device of this new device, if any
- * @devt: the dev_t for the char device to be added
- * @fmt: string for the device's name
- *
- * This function can be used by char device classes.  A struct device
- * will be created in sysfs, registered to the specified class.
- *
- * A "dev" file will be created, showing the dev_t for the device, if
- * the dev_t is not 0,0.
- * If a pointer to a parent struct device is passed in, the newly created
- * struct device will be a child of that device in sysfs.
- * The pointer to the struct device will be returned from the call.
- * Any further sysfs files that might be required can be created using this
- * pointer.
- *
- * Note: the struct class passed to this function must have previously
- * been created with a call to class_create().
- */
-struct device *device_create(struct class *class, struct device *parent,
-			     dev_t devt, const char *fmt, ...)
-{
-	va_list vargs;
-	struct device *dev;
-
-	va_start(vargs, fmt);
-	dev = device_create_vargs(class, parent, devt, NULL, fmt, vargs);
-	va_end(vargs);
-	return dev;
-}
-EXPORT_SYMBOL_GPL(device_create);
-
 static int __match_devt(struct device *dev, void *data)
 {
 	dev_t *devt = data;
diff --git a/include/linux/device.h b/include/linux/device.h
index e49aa74f248..a3ef5a2d4fb 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -470,9 +470,6 @@ extern struct device *device_create_vargs(struct class *cls,
 					  void *drvdata,
 					  const char *fmt,
 					  va_list vargs);
-extern struct device *device_create(struct class *cls, struct device *parent,
-				    dev_t devt, const char *fmt, ...)
-				    __attribute__((format(printf, 4, 5)));
 extern struct device *device_create_drvdata(struct class *cls,
 					    struct device *parent,
 					    dev_t devt,
-- 
cgit v1.2.3


From 4e10673944a5c386378ff9d692ae37e19993f9d5 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 21 Jul 2008 20:03:34 -0700
Subject: device create: convert device_create_drvdata to device_create

Now that device_create() has been audited, rename things back to the
original call to be sane.

Keep the device_create_drvdata macro around to make merges easier.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/core.c    | 11 ++++-------
 include/linux/device.h |  9 ++++-----
 2 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index 4dc0d272f6d..9ae28aa709d 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1236,7 +1236,7 @@ error:
 EXPORT_SYMBOL_GPL(device_create_vargs);
 
 /**
- * device_create_drvdata - creates a device and registers it with sysfs
+ * device_create - creates a device and registers it with sysfs
  * @class: pointer to the struct class that this device should be registered to
  * @parent: pointer to the parent struct device of this new device, if any
  * @devt: the dev_t for the char device to be added
@@ -1257,11 +1257,8 @@ EXPORT_SYMBOL_GPL(device_create_vargs);
  * Note: the struct class passed to this function must have previously
  * been created with a call to class_create().
  */
-struct device *device_create_drvdata(struct class *class,
-				     struct device *parent,
-				     dev_t devt,
-				     void *drvdata,
-				     const char *fmt, ...)
+struct device *device_create(struct class *class, struct device *parent,
+			     dev_t devt, void *drvdata, const char *fmt, ...)
 {
 	va_list vargs;
 	struct device *dev;
@@ -1271,7 +1268,7 @@ struct device *device_create_drvdata(struct class *class,
 	va_end(vargs);
 	return dev;
 }
-EXPORT_SYMBOL_GPL(device_create_drvdata);
+EXPORT_SYMBOL_GPL(device_create);
 
 static int __match_devt(struct device *dev, void *data)
 {
diff --git a/include/linux/device.h b/include/linux/device.h
index a3ef5a2d4fb..de178712e02 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -470,12 +470,11 @@ extern struct device *device_create_vargs(struct class *cls,
 					  void *drvdata,
 					  const char *fmt,
 					  va_list vargs);
-extern struct device *device_create_drvdata(struct class *cls,
-					    struct device *parent,
-					    dev_t devt,
-					    void *drvdata,
-					    const char *fmt, ...)
+extern struct device *device_create(struct class *cls, struct device *parent,
+				    dev_t devt, void *drvdata,
+				    const char *fmt, ...)
 				    __attribute__((format(printf, 5, 6)));
+#define device_create_drvdata	device_create
 extern void device_destroy(struct class *cls, dev_t devt);
 
 /*
-- 
cgit v1.2.3


From 93562b537659fc0f63920fd4d9d24f54e434f4c4 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 22 May 2008 17:21:08 -0400
Subject: Driver Core: add ability for class_for_each_device to start in middle
 of list

This mirrors the functionality that driver_for_each_device has as well.

We add a start variable, and all callers of the function are fixed up at
the same time.

The block layer will be using this new functionality in a follow-on
patch.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/class.c              | 21 +++++++++++++--------
 drivers/i2c/i2c-core.c            |  6 ++++--
 drivers/ieee1394/nodemgr.c        | 14 +++++++++-----
 drivers/power/apm_power.c         |  2 +-
 drivers/power/power_supply_core.c |  4 ++--
 include/linux/device.h            |  3 ++-
 6 files changed, 31 insertions(+), 19 deletions(-)

diff --git a/drivers/base/class.c b/drivers/base/class.c
index 71ce3ff6bdf..2eb7048003a 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -256,11 +256,14 @@ char *make_class_name(const char *name, struct kobject *kobj)
 /**
  * class_for_each_device - device iterator
  * @class: the class we're iterating
+ * @start: the device to start with in the list, if any.
  * @data: data for the callback
  * @fn: function to be called for each device
  *
  * Iterate over @class's list of devices, and call @fn for each,
- * passing it @data.
+ * passing it @data.  If @start is set, the list iteration will start
+ * there, otherwise if it is NULL, the iteration starts at the
+ * beginning of the list.
  *
  * We check the return of @fn each time. If it returns anything
  * other than 0, we break out and return that value.
@@ -269,8 +272,8 @@ char *make_class_name(const char *name, struct kobject *kobj)
  * re-acquired in @fn, otherwise it will self-deadlocking. For
  * example, calls to add or remove class members would be verboten.
  */
-int class_for_each_device(struct class *class, void *data,
-			   int (*fn)(struct device *, void *))
+int class_for_each_device(struct class *class, struct device *start,
+			  void *data, int (*fn)(struct device *, void *))
 {
 	struct device *dev;
 	int error = 0;
@@ -279,12 +282,14 @@ int class_for_each_device(struct class *class, void *data,
 		return -EINVAL;
 	down(&class->sem);
 	list_for_each_entry(dev, &class->devices, node) {
+		if (start) {
+			if (start == dev)
+				start = NULL;
+			continue;
+		}
 		dev = get_device(dev);
-		if (dev) {
-			error = fn(dev, data);
-			put_device(dev);
-		} else
-			error = -ENODEV;
+		error = fn(dev, data);
+		put_device(dev);
 		if (error)
 			break;
 	}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 7608df83d6d..7bf38c41808 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -722,7 +722,8 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
 
 	INIT_LIST_HEAD(&driver->clients);
 	/* Walk the adapters that are already present */
-	class_for_each_device(&i2c_adapter_class, driver, __attach_adapter);
+	class_for_each_device(&i2c_adapter_class, NULL, driver,
+			      __attach_adapter);
 
 	mutex_unlock(&core_lock);
 	return 0;
@@ -782,7 +783,8 @@ void i2c_del_driver(struct i2c_driver *driver)
 {
 	mutex_lock(&core_lock);
 
-	class_for_each_device(&i2c_adapter_class, driver, __detach_adapter);
+	class_for_each_device(&i2c_adapter_class, NULL, driver,
+			      __detach_adapter);
 
 	driver_unregister(&driver->driver);
 	pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 05710c7c122..47c0d85e0f3 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1453,7 +1453,8 @@ static void nodemgr_suspend_ne(struct node_entry *ne)
 	ne->in_limbo = 1;
 	WARN_ON(device_create_file(&ne->device, &dev_attr_ne_in_limbo));
 
-	class_for_each_device(&nodemgr_ud_class, ne, __nodemgr_driver_suspend);
+	class_for_each_device(&nodemgr_ud_class, NULL, ne,
+			      __nodemgr_driver_suspend);
 }
 
 
@@ -1462,7 +1463,8 @@ static void nodemgr_resume_ne(struct node_entry *ne)
 	ne->in_limbo = 0;
 	device_remove_file(&ne->device, &dev_attr_ne_in_limbo);
 
-	class_for_each_device(&nodemgr_ud_class, ne, __nodemgr_driver_resume);
+	class_for_each_device(&nodemgr_ud_class, NULL, ne,
+			      __nodemgr_driver_resume);
 	HPSB_DEBUG("Node resumed: ID:BUS[" NODE_BUS_FMT "]  GUID[%016Lx]",
 		   NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid);
 }
@@ -1498,7 +1500,8 @@ static int __nodemgr_update_pdrv(struct device *dev, void *data)
 
 static void nodemgr_update_pdrv(struct node_entry *ne)
 {
-	class_for_each_device(&nodemgr_ud_class, ne, __nodemgr_update_pdrv);
+	class_for_each_device(&nodemgr_ud_class, NULL, ne,
+			      __nodemgr_update_pdrv);
 }
 
 
@@ -1591,7 +1594,8 @@ static void nodemgr_node_probe(struct host_info *hi, int generation)
 	 * while probes are time-consuming. (Well, those probes need some
 	 * improvement...) */
 
-	class_for_each_device(&nodemgr_ne_class, &param, __nodemgr_node_probe);
+	class_for_each_device(&nodemgr_ne_class, NULL, &param,
+			      __nodemgr_node_probe);
 
 	/* If we had a bus reset while we were scanning the bus, it is
 	 * possible that we did not probe all nodes.  In that case, we
@@ -1826,7 +1830,7 @@ int nodemgr_for_each_host(void *data, int (*cb)(struct hpsb_host *, void *))
 
 	hip.cb = cb;
 	hip.data = data;
-	error = class_for_each_device(&hpsb_host_class, &hip,
+	error = class_for_each_device(&hpsb_host_class, NULL, &hip,
 				      __nodemgr_for_each_host);
 
 	return error;
diff --git a/drivers/power/apm_power.c b/drivers/power/apm_power.c
index a4892275659..936bae560fa 100644
--- a/drivers/power/apm_power.c
+++ b/drivers/power/apm_power.c
@@ -78,7 +78,7 @@ static void find_main_battery(void)
 	main_battery = NULL;
 	bp.main = main_battery;
 
-	error = class_for_each_device(power_supply_class, &bp,
+	error = class_for_each_device(power_supply_class, NULL, &bp,
 				      __find_main_battery);
 	if (error) {
 		main_battery = bp.main;
diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index af1633eb3b7..cb1ccb47292 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -41,7 +41,7 @@ static void power_supply_changed_work(struct work_struct *work)
 
 	dev_dbg(psy->dev, "%s\n", __func__);
 
-	class_for_each_device(power_supply_class, psy,
+	class_for_each_device(power_supply_class, NULL, psy,
 			      __power_supply_changed_work);
 
 	power_supply_update_leds(psy);
@@ -79,7 +79,7 @@ int power_supply_am_i_supplied(struct power_supply *psy)
 {
 	int error;
 
-	error = class_for_each_device(power_supply_class, psy,
+	error = class_for_each_device(power_supply_class, NULL, psy,
 				      __power_supply_am_i_supplied);
 
 	dev_dbg(psy->dev, "%s %d\n", __func__, error);
diff --git a/include/linux/device.h b/include/linux/device.h
index de178712e02..6d5b351b29c 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -210,7 +210,8 @@ extern struct kobject *sysfs_dev_block_kobj;
 extern struct kobject *sysfs_dev_char_kobj;
 extern int __must_check class_register(struct class *class);
 extern void class_unregister(struct class *class);
-extern int class_for_each_device(struct class *class, void *data,
+extern int class_for_each_device(struct class *class, struct device *start,
+				 void *data,
 				 int (*fn)(struct device *dev, void *data));
 extern struct device *class_find_device(struct class *class, void *data,
 					int (*match)(struct device *, void *));
-- 
cgit v1.2.3


From 695794ae0c5bdd9bd06e35b118801e2e9be04f9e Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 22 May 2008 17:21:08 -0400
Subject: Driver Core: add ability for class_find_device to start in middle of
 list

This mirrors the functionality that driver_find_device has as well.

We add a start variable, and all callers of the function are fixed up at
the same time.

The block layer will be using this new functionality in a follow-on
patch.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/class.c                | 22 +++++++++++++---------
 drivers/base/core.c                 |  2 +-
 drivers/ieee1394/nodemgr.c          |  9 ++++++---
 drivers/rtc/interface.c             |  2 +-
 drivers/scsi/hosts.c                |  3 ++-
 drivers/scsi/scsi_transport_iscsi.c |  4 ++--
 drivers/spi/spi.c                   |  2 +-
 include/linux/device.h              |  3 ++-
 8 files changed, 28 insertions(+), 19 deletions(-)

diff --git a/drivers/base/class.c b/drivers/base/class.c
index 2eb7048003a..3918d0e432d 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -302,6 +302,7 @@ EXPORT_SYMBOL_GPL(class_for_each_device);
 /**
  * class_find_device - device iterator for locating a particular device
  * @class: the class we're iterating
+ * @start: Device to begin with
  * @data: data for the match function
  * @match: function to check device
  *
@@ -319,8 +320,9 @@ EXPORT_SYMBOL_GPL(class_for_each_device);
  * re-acquired in @match, otherwise it will self-deadlocking. For
  * example, calls to add or remove class members would be verboten.
  */
-struct device *class_find_device(struct class *class, void *data,
-				   int (*match)(struct device *, void *))
+struct device *class_find_device(struct class *class, struct device *start,
+				 void *data,
+				 int (*match)(struct device *, void *))
 {
 	struct device *dev;
 	int found = 0;
@@ -330,15 +332,17 @@ struct device *class_find_device(struct class *class, void *data,
 
 	down(&class->sem);
 	list_for_each_entry(dev, &class->devices, node) {
+		if (start) {
+			if (start == dev)
+				start = NULL;
+			continue;
+		}
 		dev = get_device(dev);
-		if (dev) {
-			if (match(dev, data)) {
-				found = 1;
-				break;
-			} else
-				put_device(dev);
-		} else
+		if (match(dev, data)) {
+			found = 1;
 			break;
+		} else
+			put_device(dev);
 	}
 	up(&class->sem);
 
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 9ae28aa709d..9f05de6f80b 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1289,7 +1289,7 @@ void device_destroy(struct class *class, dev_t devt)
 {
 	struct device *dev;
 
-	dev = class_find_device(class, &devt, __match_devt);
+	dev = class_find_device(class, NULL, &devt, __match_devt);
 	if (dev) {
 		put_device(dev);
 		device_unregister(dev);
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 47c0d85e0f3..994a21e5a0a 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -754,7 +754,8 @@ static void nodemgr_remove_uds(struct node_entry *ne)
 	 */
 	mutex_lock(&nodemgr_serialize_remove_uds);
 	for (;;) {
-		dev = class_find_device(&nodemgr_ud_class, ne, __match_ne);
+		dev = class_find_device(&nodemgr_ud_class, NULL, ne,
+					__match_ne);
 		if (!dev)
 			break;
 		ud = container_of(dev, struct unit_directory, unit_dev);
@@ -901,7 +902,8 @@ static struct node_entry *find_entry_by_guid(u64 guid)
 	struct device *dev;
 	struct node_entry *ne;
 
-	dev = class_find_device(&nodemgr_ne_class, &guid, __match_ne_guid);
+	dev = class_find_device(&nodemgr_ne_class, NULL, &guid,
+				__match_ne_guid);
 	if (!dev)
 		return NULL;
 	ne = container_of(dev, struct node_entry, node_dev);
@@ -940,7 +942,8 @@ static struct node_entry *find_entry_by_nodeid(struct hpsb_host *host,
 	param.host = host;
 	param.nodeid = nodeid;
 
-	dev = class_find_device(&nodemgr_ne_class, &param, __match_ne_nodeid);
+	dev = class_find_device(&nodemgr_ne_class, NULL, &param,
+				__match_ne_nodeid);
 	if (!dev)
 		return NULL;
 	ne = container_of(dev, struct node_entry, node_dev);
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 58b7336640f..d397fa5f3a9 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -345,7 +345,7 @@ struct rtc_device *rtc_class_open(char *name)
 	struct device *dev;
 	struct rtc_device *rtc = NULL;
 
-	dev = class_find_device(rtc_class, name, __rtc_match);
+	dev = class_find_device(rtc_class, NULL, name, __rtc_match);
 	if (dev)
 		rtc = to_rtc_device(dev);
 
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 35cd892dce0..78dad28b70d 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -466,7 +466,8 @@ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum)
 	struct device *cdev;
 	struct Scsi_Host *shost = ERR_PTR(-ENXIO);
 
-	cdev = class_find_device(&shost_class, &hostnum, __scsi_host_match);
+	cdev = class_find_device(&shost_class, NULL, &hostnum,
+				 __scsi_host_match);
 	if (cdev) {
 		shost = scsi_host_get(class_to_shost(cdev));
 		put_device(cdev);
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 3af7cbcc5c5..06748f318cd 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -170,7 +170,7 @@ iscsi_create_endpoint(int dd_size)
 	int err;
 
 	for (id = 1; id < ISCSI_MAX_EPID; id++) {
-		dev = class_find_device(&iscsi_endpoint_class, &id,
+		dev = class_find_device(&iscsi_endpoint_class, NULL, &id,
 					iscsi_match_epid);
 		if (!dev)
 			break;
@@ -222,7 +222,7 @@ struct iscsi_endpoint *iscsi_lookup_endpoint(u64 handle)
 	struct iscsi_endpoint *ep;
 	struct device *dev;
 
-	dev = class_find_device(&iscsi_endpoint_class, &handle,
+	dev = class_find_device(&iscsi_endpoint_class, NULL, &handle,
 				iscsi_match_epid);
 	if (!dev)
 		return NULL;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 1ad12afc6ba..1771b2456bf 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -502,7 +502,7 @@ struct spi_master *spi_busnum_to_master(u16 bus_num)
 	struct device		*dev;
 	struct spi_master	*master = NULL;
 
-	dev = class_find_device(&spi_master_class, &bus_num,
+	dev = class_find_device(&spi_master_class, NULL, &bus_num,
 				__spi_master_match);
 	if (dev)
 		master = container_of(dev, struct spi_master, dev);
diff --git a/include/linux/device.h b/include/linux/device.h
index 6d5b351b29c..c1f72984875 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -213,7 +213,8 @@ extern void class_unregister(struct class *class);
 extern int class_for_each_device(struct class *class, struct device *start,
 				 void *data,
 				 int (*fn)(struct device *dev, void *data));
-extern struct device *class_find_device(struct class *class, void *data,
+extern struct device *class_find_device(struct class *class,
+					struct device *start, void *data,
 					int (*match)(struct device *, void *));
 
 struct class_attribute {
-- 
cgit v1.2.3


From 6ffeea77ff014f1456fcd0564eac84b34e9535ca Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 22 May 2008 17:21:08 -0400
Subject: block: fix compiler warning in genhd.c

Warn if something really bad happens if we can't create this link.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/genhd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/block/genhd.c b/block/genhd.c
index 24e3fc9095f..3ccf5c01756 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -183,6 +183,7 @@ static int exact_lock(dev_t devt, void *data)
 void add_disk(struct gendisk *disk)
 {
 	struct backing_dev_info *bdi;
+	int retval;
 
 	disk->flags |= GENHD_FL_UP;
 	blk_register_region(MKDEV(disk->major, disk->first_minor),
@@ -193,7 +194,8 @@ void add_disk(struct gendisk *disk)
 
 	bdi = &disk->queue->backing_dev_info;
 	bdi_register_dev(bdi, MKDEV(disk->major, disk->first_minor));
-	sysfs_create_link(&disk->dev.kobj, &bdi->dev->kobj, "bdi");
+	retval = sysfs_create_link(&disk->dev.kobj, &bdi->dev->kobj, "bdi");
+	WARN_ON(retval);
 }
 
 EXPORT_SYMBOL(add_disk);
-- 
cgit v1.2.3


From 5c6f35c5ece8f130cd8ec9ba0d71dc146b46a0f1 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 22 May 2008 17:21:08 -0400
Subject: block: make printk_partition use the class iterator function

Use the proper class iterator function instead of mucking around in the
internals of the class structures.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/genhd.c | 93 ++++++++++++++++++++++++++++++++---------------------------
 1 file changed, 50 insertions(+), 43 deletions(-)

diff --git a/block/genhd.c b/block/genhd.c
index 3ccf5c01756..10b9ac46c2d 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -227,58 +227,65 @@ struct gendisk *get_gendisk(dev_t devt, int *part)
 }
 
 /*
- * print a full list of all partitions - intended for places where the root
- * filesystem can't be mounted and thus to give the victim some idea of what
- * went wrong
+ * print a partitions - intended for places where the root filesystem can't be
+ * mounted and thus to give the victim some idea of what went wrong
  */
-void __init printk_all_partitions(void)
+static int printk_partition(struct device *dev, void *data)
 {
-	struct device *dev;
 	struct gendisk *sgp;
 	char buf[BDEVNAME_SIZE];
 	int n;
 
-	mutex_lock(&block_class_lock);
-	/* For each block device... */
-	list_for_each_entry(dev, &block_class.devices, node) {
-		if (dev->type != &disk_type)
-			continue;
-		sgp = dev_to_disk(dev);
-		/*
-		 * Don't show empty devices or things that have been surpressed
-		 */
-		if (get_capacity(sgp) == 0 ||
-		    (sgp->flags & GENHD_FL_SUPPRESS_PARTITION_INFO))
-			continue;
+	if (dev->type != &disk_type)
+		goto exit;
 
-		/*
-		 * Note, unlike /proc/partitions, I am showing the numbers in
-		 * hex - the same format as the root= option takes.
-		 */
-		printk("%02x%02x %10llu %s",
-			sgp->major, sgp->first_minor,
-			(unsigned long long)get_capacity(sgp) >> 1,
-			disk_name(sgp, 0, buf));
-		if (sgp->driverfs_dev != NULL &&
-		    sgp->driverfs_dev->driver != NULL)
-			printk(" driver: %s\n",
-				sgp->driverfs_dev->driver->name);
-		else
-			printk(" (driver?)\n");
-
-		/* now show the partitions */
-		for (n = 0; n < sgp->minors - 1; ++n) {
-			if (sgp->part[n] == NULL)
-				continue;
-			if (sgp->part[n]->nr_sects == 0)
-				continue;
-			printk("  %02x%02x %10llu %s\n",
-				sgp->major, n + 1 + sgp->first_minor,
-				(unsigned long long)sgp->part[n]->nr_sects >> 1,
-				disk_name(sgp, n + 1, buf));
-		}
+	sgp = dev_to_disk(dev);
+	/*
+	 * Don't show empty devices or things that have been surpressed
+	 */
+	if (get_capacity(sgp) == 0 ||
+	    (sgp->flags & GENHD_FL_SUPPRESS_PARTITION_INFO))
+		goto exit;
+
+	/*
+	 * Note, unlike /proc/partitions, I am showing the numbers in
+	 * hex - the same format as the root= option takes.
+	 */
+	printk("%02x%02x %10llu %s",
+		sgp->major, sgp->first_minor,
+		(unsigned long long)get_capacity(sgp) >> 1,
+		disk_name(sgp, 0, buf));
+	if (sgp->driverfs_dev != NULL &&
+	    sgp->driverfs_dev->driver != NULL)
+		printk(" driver: %s\n",
+			sgp->driverfs_dev->driver->name);
+	else
+		printk(" (driver?)\n");
+
+	/* now show the partitions */
+	for (n = 0; n < sgp->minors - 1; ++n) {
+		if (sgp->part[n] == NULL)
+			goto exit;
+		if (sgp->part[n]->nr_sects == 0)
+			goto exit;
+		printk("  %02x%02x %10llu %s\n",
+			sgp->major, n + 1 + sgp->first_minor,
+			(unsigned long long)sgp->part[n]->nr_sects >> 1,
+			disk_name(sgp, n + 1, buf));
 	}
+exit:
+	return 0;
+}
 
+/*
+ * print a full list of all partitions - intended for places where the root
+ * filesystem can't be mounted and thus to give the victim some idea of what
+ * went wrong
+ */
+void __init printk_all_partitions(void)
+{
+	mutex_lock(&block_class_lock);
+	class_for_each_device(&block_class, NULL, NULL, printk_partition);
 	mutex_unlock(&block_class_lock);
 }
 
-- 
cgit v1.2.3


From a142be856f060ae8106512c0e81a8d6f8746ab0b Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 22 May 2008 17:21:08 -0400
Subject: block: make blk_lookup_devt use the class iterator function

Use the proper class iterator function instead of mucking around in the
internals of the class structures.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/genhd.c | 38 ++++++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 12 deletions(-)

diff --git a/block/genhd.c b/block/genhd.c
index 10b9ac46c2d..e8c42bfd12b 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -677,24 +677,38 @@ void genhd_media_change_notify(struct gendisk *disk)
 EXPORT_SYMBOL_GPL(genhd_media_change_notify);
 #endif  /*  0  */
 
+struct find_block {
+	const char *name;
+	int part;
+};
+
+static int match_id(struct device *dev, void *data)
+{
+	struct find_block *find = data;
+
+	if (dev->type != &disk_type)
+		return 0;
+	if (strcmp(dev->bus_id, find->name) == 0) {
+		struct gendisk *disk = dev_to_disk(dev);
+		if (find->part < disk->minors)
+			return 1;
+	}
+	return 0;
+}
+
 dev_t blk_lookup_devt(const char *name, int part)
 {
 	struct device *dev;
 	dev_t devt = MKDEV(0, 0);
+	struct find_block find;
 
 	mutex_lock(&block_class_lock);
-	list_for_each_entry(dev, &block_class.devices, node) {
-		if (dev->type != &disk_type)
-			continue;
-		if (strcmp(dev->bus_id, name) == 0) {
-			struct gendisk *disk = dev_to_disk(dev);
-
-			if (part < disk->minors)
-				devt = MKDEV(MAJOR(dev->devt),
-					     MINOR(dev->devt) + part);
-			break;
-		}
-	}
+	find.name = name;
+	find.part = part;
+	dev = class_find_device(&block_class, NULL, (void *)&find, match_id);
+	if (dev)
+		devt = MKDEV(MAJOR(dev->devt),
+			     MINOR(dev->devt) + part);
 	mutex_unlock(&block_class_lock);
 
 	return devt;
-- 
cgit v1.2.3


From a6e2ba88774bc5870ab3d9664cb86d70415f7402 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Fri, 23 May 2008 09:44:11 -0700
Subject: block: make /proc/diskstats only build if CONFIG_PROC_FS is enabled

These functions are only needed if CONFIG_PROC_FS is enabled, so save
the space when it is not.

This also makes it easier for a patch later in this series to work
properly if CONFIG_PROC_FS is not enabled.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/genhd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/block/genhd.c b/block/genhd.c
index e8c42bfd12b..68a5f28007e 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -544,6 +544,7 @@ static struct device_type disk_type = {
 	.release	= disk_release,
 };
 
+#ifdef CONFIG_PROC_FS
 /*
  * aggregate disk stat collector.  Uses the same stats that the sysfs
  * entries do, above, but makes them available through one seq_file.
@@ -653,6 +654,7 @@ const struct seq_operations diskstats_op = {
 	.stop	= diskstats_stop,
 	.show	= diskstats_show
 };
+#endif /* CONFIG_PROC_FS */
 
 static void media_change_notify_thread(struct work_struct *work)
 {
-- 
cgit v1.2.3


From 68c4d4a7875c59f2e4b72901ab11ba978e75bde0 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 22 May 2008 17:21:08 -0400
Subject: block: make proc files seq_start use the class_find_device()

Use the proper class iterator function instead of mucking around in the
internals of the class structures.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/genhd.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/block/genhd.c b/block/genhd.c
index 68a5f28007e..f03bdadc52a 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -291,18 +291,25 @@ void __init printk_all_partitions(void)
 
 #ifdef CONFIG_PROC_FS
 /* iterator */
+static int find_start(struct device *dev, void *data)
+{
+	loff_t k = *(loff_t *)data;
+
+	if (dev->type != &disk_type)
+		return 0;
+	if (!k--)
+		return 1;
+	return 0;
+}
+
 static void *part_start(struct seq_file *part, loff_t *pos)
 {
-	loff_t k = *pos;
 	struct device *dev;
 
 	mutex_lock(&block_class_lock);
-	list_for_each_entry(dev, &block_class.devices, node) {
-		if (dev->type != &disk_type)
-			continue;
-		if (!k--)
-			return dev_to_disk(dev);
-	}
+	dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
+	if (dev)
+		return dev_to_disk(dev);
 	return NULL;
 }
 
@@ -555,16 +562,12 @@ static struct device_type disk_type = {
 
 static void *diskstats_start(struct seq_file *part, loff_t *pos)
 {
-	loff_t k = *pos;
 	struct device *dev;
 
 	mutex_lock(&block_class_lock);
-	list_for_each_entry(dev, &block_class.devices, node) {
-		if (dev->type != &disk_type)
-			continue;
-		if (!k--)
-			return dev_to_disk(dev);
-	}
+	dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
+	if (dev)
+		return dev_to_disk(dev);
 	return NULL;
 }
 
-- 
cgit v1.2.3


From 66c64afec16a7b46212ecb2fa99998923bbeea3f Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 22 May 2008 17:21:08 -0400
Subject: block: move header for /proc/partitions to seq_start

The seq_start call is the better place for the header for the file, that
way we don't have to be mucking in the class structure to try to figure
out if this is the first partition or not.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/genhd.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/block/genhd.c b/block/genhd.c
index f03bdadc52a..70f1d707578 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -305,6 +305,10 @@ static int find_start(struct device *dev, void *data)
 static void *part_start(struct seq_file *part, loff_t *pos)
 {
 	struct device *dev;
+	loff_t n = *pos;
+
+	if (!n)
+		seq_puts(part, "major minor  #blocks  name\n\n");
 
 	mutex_lock(&block_class_lock);
 	dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
@@ -338,9 +342,6 @@ static int show_partition(struct seq_file *part, void *v)
 	int n;
 	char buf[BDEVNAME_SIZE];
 
-	if (&sgp->dev.node == block_class.devices.next)
-		seq_puts(part, "major minor  #blocks  name\n\n");
-
 	/* Don't show non-partitionable removeable devices or empty devices */
 	if (!get_capacity(sgp) ||
 			(sgp->minors == 1 && (sgp->flags & GENHD_FL_REMOVABLE)))
-- 
cgit v1.2.3


From 27f302519148f311307637d4c9a6d0fd87d07e4c Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Thu, 22 May 2008 17:21:08 -0400
Subject: block: make /proc/partitions and /proc/diskstats use
 class_find_device()

Use the proper class iterator function instead of mucking around in the
internals of the class structures.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/genhd.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/block/genhd.c b/block/genhd.c
index 70f1d707578..c13cc77291a 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -317,17 +317,21 @@ static void *part_start(struct seq_file *part, loff_t *pos)
 	return NULL;
 }
 
+static int find_next(struct device *dev, void *data)
+{
+	if (dev->type == &disk_type)
+		return 1;
+	return 0;
+}
+
 static void *part_next(struct seq_file *part, void *v, loff_t *pos)
 {
 	struct gendisk *gp = v;
 	struct device *dev;
 	++*pos;
-	list_for_each_entry(dev, &gp->dev.node, node) {
-		if (&dev->node == &block_class.devices)
-			return NULL;
-		if (dev->type == &disk_type)
-			return dev_to_disk(dev);
-	}
+	dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
+	if (dev)
+		return dev_to_disk(dev);
 	return NULL;
 }
 
@@ -578,12 +582,9 @@ static void *diskstats_next(struct seq_file *part, void *v, loff_t *pos)
 	struct device *dev;
 
 	++*pos;
-	list_for_each_entry(dev, &gp->dev.node, node) {
-		if (&dev->node == &block_class.devices)
-			return NULL;
-		if (dev->type == &disk_type)
-			return dev_to_disk(dev);
-	}
+	dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
+	if (dev)
+		return dev_to_disk(dev);
 	return NULL;
 }
 
-- 
cgit v1.2.3


From d4c4196f24ade5f336882587480652efde2c739c Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue, 27 May 2008 10:17:53 +0300
Subject: infiniband: rename "device" to "ib_device" in cm_device

This pointer really is a struct ib_device, not a struct device, so name
it properly to help prevent confusion.

This makes the followon patch in this series much smaller and easier to
understand as well.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/infiniband/core/cm.c | 47 ++++++++++++++++++++++----------------------
 1 file changed, 24 insertions(+), 23 deletions(-)

diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 55738eead3b..8dc442984c8 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -162,7 +162,7 @@ struct cm_port {
 
 struct cm_device {
 	struct list_head list;
-	struct ib_device *device;
+	struct ib_device *ib_device;
 	struct kobject dev_obj;
 	u8 ack_delay;
 	struct cm_port *port[0];
@@ -339,7 +339,7 @@ static void cm_init_av_for_response(struct cm_port *port, struct ib_wc *wc,
 {
 	av->port = port;
 	av->pkey_index = wc->pkey_index;
-	ib_init_ah_from_wc(port->cm_dev->device, port->port_num, wc,
+	ib_init_ah_from_wc(port->cm_dev->ib_device, port->port_num, wc,
 			   grh, &av->ah_attr);
 }
 
@@ -353,7 +353,7 @@ static int cm_init_av_by_path(struct ib_sa_path_rec *path, struct cm_av *av)
 
 	read_lock_irqsave(&cm.device_lock, flags);
 	list_for_each_entry(cm_dev, &cm.device_list, list) {
-		if (!ib_find_cached_gid(cm_dev->device, &path->sgid,
+		if (!ib_find_cached_gid(cm_dev->ib_device, &path->sgid,
 					&p, NULL)) {
 			port = cm_dev->port[p-1];
 			break;
@@ -364,13 +364,13 @@ static int cm_init_av_by_path(struct ib_sa_path_rec *path, struct cm_av *av)
 	if (!port)
 		return -EINVAL;
 
-	ret = ib_find_cached_pkey(cm_dev->device, port->port_num,
+	ret = ib_find_cached_pkey(cm_dev->ib_device, port->port_num,
 				  be16_to_cpu(path->pkey), &av->pkey_index);
 	if (ret)
 		return ret;
 
 	av->port = port;
-	ib_init_ah_from_path(cm_dev->device, port->port_num, path,
+	ib_init_ah_from_path(cm_dev->ib_device, port->port_num, path,
 			     &av->ah_attr);
 	av->timeout = path->packet_life_time + 1;
 	return 0;
@@ -1515,7 +1515,7 @@ static int cm_req_handler(struct cm_work *work)
 
 	req_msg = (struct cm_req_msg *)work->mad_recv_wc->recv_buf.mad;
 
-	cm_id = ib_create_cm_id(work->port->cm_dev->device, NULL, NULL);
+	cm_id = ib_create_cm_id(work->port->cm_dev->ib_device, NULL, NULL);
 	if (IS_ERR(cm_id))
 		return PTR_ERR(cm_id);
 
@@ -1550,7 +1550,7 @@ static int cm_req_handler(struct cm_work *work)
 	cm_format_paths_from_req(req_msg, &work->path[0], &work->path[1]);
 	ret = cm_init_av_by_path(&work->path[0], &cm_id_priv->av);
 	if (ret) {
-		ib_get_cached_gid(work->port->cm_dev->device,
+		ib_get_cached_gid(work->port->cm_dev->ib_device,
 				  work->port->port_num, 0, &work->path[0].sgid);
 		ib_send_cm_rej(cm_id, IB_CM_REJ_INVALID_GID,
 			       &work->path[0].sgid, sizeof work->path[0].sgid,
@@ -2950,7 +2950,7 @@ static int cm_sidr_req_handler(struct cm_work *work)
 	struct cm_sidr_req_msg *sidr_req_msg;
 	struct ib_wc *wc;
 
-	cm_id = ib_create_cm_id(work->port->cm_dev->device, NULL, NULL);
+	cm_id = ib_create_cm_id(work->port->cm_dev->ib_device, NULL, NULL);
 	if (IS_ERR(cm_id))
 		return PTR_ERR(cm_id);
 	cm_id_priv = container_of(cm_id, struct cm_id_private, id);
@@ -3578,7 +3578,7 @@ static void cm_get_ack_delay(struct cm_device *cm_dev)
 {
 	struct ib_device_attr attr;
 
-	if (ib_query_device(cm_dev->device, &attr))
+	if (ib_query_device(cm_dev->ib_device, &attr))
 		cm_dev->ack_delay = 0; /* acks will rely on packet life time */
 	else
 		cm_dev->ack_delay = attr.local_ca_ack_delay;
@@ -3676,7 +3676,7 @@ static void cm_remove_port_fs(struct cm_port *port)
 	kobject_put(&port->port_obj);
 }
 
-static void cm_add_one(struct ib_device *device)
+static void cm_add_one(struct ib_device *ib_device)
 {
 	struct cm_device *cm_dev;
 	struct cm_port *port;
@@ -3691,26 +3691,27 @@ static void cm_add_one(struct ib_device *device)
 	int ret;
 	u8 i;
 
-	if (rdma_node_get_transport(device->node_type) != RDMA_TRANSPORT_IB)
+	if (rdma_node_get_transport(ib_device->node_type) != RDMA_TRANSPORT_IB)
 		return;
 
 	cm_dev = kzalloc(sizeof(*cm_dev) + sizeof(*port) *
-			 device->phys_port_cnt, GFP_KERNEL);
+			 ib_device->phys_port_cnt, GFP_KERNEL);
 	if (!cm_dev)
 		return;
 
-	cm_dev->device = device;
+	cm_dev->ib_device = ib_device;
 	cm_get_ack_delay(cm_dev);
 
 	ret = kobject_init_and_add(&cm_dev->dev_obj, &cm_dev_obj_type,
-				   &cm_class.subsys.kobj, "%s", device->name);
+				   &cm_class.subsys.kobj, "%s",
+				   ib_device->name);
 	if (ret) {
 		kfree(cm_dev);
 		return;
 	}
 
 	set_bit(IB_MGMT_METHOD_SEND, reg_req.method_mask);
-	for (i = 1; i <= device->phys_port_cnt; i++) {
+	for (i = 1; i <= ib_device->phys_port_cnt; i++) {
 		port = kzalloc(sizeof *port, GFP_KERNEL);
 		if (!port)
 			goto error1;
@@ -3723,7 +3724,7 @@ static void cm_add_one(struct ib_device *device)
 		if (ret)
 			goto error1;
 
-		port->mad_agent = ib_register_mad_agent(device, i,
+		port->mad_agent = ib_register_mad_agent(ib_device, i,
 							IB_QPT_GSI,
 							&reg_req,
 							0,
@@ -3733,11 +3734,11 @@ static void cm_add_one(struct ib_device *device)
 		if (IS_ERR(port->mad_agent))
 			goto error2;
 
-		ret = ib_modify_port(device, i, 0, &port_modify);
+		ret = ib_modify_port(ib_device, i, 0, &port_modify);
 		if (ret)
 			goto error3;
 	}
-	ib_set_client_data(device, &cm_client, cm_dev);
+	ib_set_client_data(ib_device, &cm_client, cm_dev);
 
 	write_lock_irqsave(&cm.device_lock, flags);
 	list_add_tail(&cm_dev->list, &cm.device_list);
@@ -3753,14 +3754,14 @@ error1:
 	port_modify.clr_port_cap_mask = IB_PORT_CM_SUP;
 	while (--i) {
 		port = cm_dev->port[i-1];
-		ib_modify_port(device, port->port_num, 0, &port_modify);
+		ib_modify_port(ib_device, port->port_num, 0, &port_modify);
 		ib_unregister_mad_agent(port->mad_agent);
 		cm_remove_port_fs(port);
 	}
 	kobject_put(&cm_dev->dev_obj);
 }
 
-static void cm_remove_one(struct ib_device *device)
+static void cm_remove_one(struct ib_device *ib_device)
 {
 	struct cm_device *cm_dev;
 	struct cm_port *port;
@@ -3770,7 +3771,7 @@ static void cm_remove_one(struct ib_device *device)
 	unsigned long flags;
 	int i;
 
-	cm_dev = ib_get_client_data(device, &cm_client);
+	cm_dev = ib_get_client_data(ib_device, &cm_client);
 	if (!cm_dev)
 		return;
 
@@ -3778,9 +3779,9 @@ static void cm_remove_one(struct ib_device *device)
 	list_del(&cm_dev->list);
 	write_unlock_irqrestore(&cm.device_lock, flags);
 
-	for (i = 1; i <= device->phys_port_cnt; i++) {
+	for (i = 1; i <= ib_device->phys_port_cnt; i++) {
 		port = cm_dev->port[i-1];
-		ib_modify_port(device, port->port_num, 0, &port_modify);
+		ib_modify_port(ib_device, port->port_num, 0, &port_modify);
 		ib_unregister_mad_agent(port->mad_agent);
 		flush_workqueue(cm.wq);
 		cm_remove_port_fs(port);
-- 
cgit v1.2.3


From 110cf374a809817d5c080c0ac82d65d029820a66 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue, 27 May 2008 10:17:53 +0300
Subject: infiniband: make cm_device use a struct device and not a kobject.

This object really should be a struct device, or at least contain a
pointer to a struct device, as it is trying to create a separate device
tree outside of the main device tree.  This patch fixes this problem.

It is needed for the class core rework that is being done in the driver
core.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/infiniband/core/cm.c | 29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 8dc442984c8..922d35f4fc0 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -44,6 +44,7 @@
 #include <linux/spinlock.h>
 #include <linux/sysfs.h>
 #include <linux/workqueue.h>
+#include <linux/kdev_t.h>
 
 #include <rdma/ib_cache.h>
 #include <rdma/ib_cm.h>
@@ -163,7 +164,7 @@ struct cm_port {
 struct cm_device {
 	struct list_head list;
 	struct ib_device *ib_device;
-	struct kobject dev_obj;
+	struct device *device;
 	u8 ack_delay;
 	struct cm_port *port[0];
 };
@@ -3618,18 +3619,6 @@ static struct kobj_type cm_port_obj_type = {
 	.release = cm_release_port_obj
 };
 
-static void cm_release_dev_obj(struct kobject *obj)
-{
-	struct cm_device *cm_dev;
-
-	cm_dev = container_of(obj, struct cm_device, dev_obj);
-	kfree(cm_dev);
-}
-
-static struct kobj_type cm_dev_obj_type = {
-	.release = cm_release_dev_obj
-};
-
 struct class cm_class = {
 	.name    = "infiniband_cm",
 };
@@ -3640,7 +3629,7 @@ static int cm_create_port_fs(struct cm_port *port)
 	int i, ret;
 
 	ret = kobject_init_and_add(&port->port_obj, &cm_port_obj_type,
-				   &port->cm_dev->dev_obj,
+				   &port->cm_dev->device->kobj,
 				   "%d", port->port_num);
 	if (ret) {
 		kfree(port);
@@ -3702,10 +3691,10 @@ static void cm_add_one(struct ib_device *ib_device)
 	cm_dev->ib_device = ib_device;
 	cm_get_ack_delay(cm_dev);
 
-	ret = kobject_init_and_add(&cm_dev->dev_obj, &cm_dev_obj_type,
-				   &cm_class.subsys.kobj, "%s",
-				   ib_device->name);
-	if (ret) {
+	cm_dev->device = device_create_drvdata(&cm_class, &ib_device->dev,
+					       MKDEV(0, 0), NULL,
+					       "%s", ib_device->name);
+	if (!cm_dev->device) {
 		kfree(cm_dev);
 		return;
 	}
@@ -3758,7 +3747,7 @@ error1:
 		ib_unregister_mad_agent(port->mad_agent);
 		cm_remove_port_fs(port);
 	}
-	kobject_put(&cm_dev->dev_obj);
+	device_unregister(cm_dev->device);
 }
 
 static void cm_remove_one(struct ib_device *ib_device)
@@ -3786,7 +3775,7 @@ static void cm_remove_one(struct ib_device *ib_device)
 		flush_workqueue(cm.wq);
 		cm_remove_port_fs(port);
 	}
-	kobject_put(&cm_dev->dev_obj);
+	device_unregister(cm_dev->device);
 }
 
 static int __init ib_cm_init(void)
-- 
cgit v1.2.3


From 16be63fd1670000b96b76cb55b6f1bead21b4c4b Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue, 27 May 2008 11:50:16 -0700
Subject: bluetooth: remove improper bluetooth class symlinks.

Don't create symlinks in a class to a device that is not owned by the
class.  If the bluetooth subsystem really wants to point to all of the
devices it controls, it needs to create real devices, not fake symlinks.

Cc: Maxim Krasnyansky <maxk@qualcomm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 net/bluetooth/hci_sysfs.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 844ca5f1b2d..c85bf8f678d 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -398,10 +398,6 @@ int hci_register_sysfs(struct hci_dev *hdev)
 		if (device_create_file(dev, bt_attrs[i]) < 0)
 			BT_ERR("Failed to create device attribute");
 
-	if (sysfs_create_link(&bt_class->subsys.kobj,
-				&dev->kobj, kobject_name(&dev->kobj)) < 0)
-		BT_ERR("Failed to create class symlink");
-
 	return 0;
 }
 
@@ -409,9 +405,6 @@ void hci_unregister_sysfs(struct hci_dev *hdev)
 {
 	BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
 
-	sysfs_remove_link(&bt_class->subsys.kobj,
-					kobject_name(&hdev->dev.kobj));
-
 	device_del(&hdev->dev);
 }
 
-- 
cgit v1.2.3


From 7c71448b8aa80123fc521563d5f7c63a099d97ab Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Tue, 22 Jan 2008 18:17:41 -0500
Subject: class: move driver core specific parts to a private structure

This moves the portions of struct class that are dynamic (kobject and
lock and lists) out of the main structure and into a dynamic, private,
structure.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/base.h    | 27 ++++++++++++++++
 drivers/base/class.c   | 87 ++++++++++++++++++++++++++++----------------------
 drivers/base/core.c    | 57 +++++++++++++++++----------------
 include/linux/device.h |  7 ++--
 4 files changed, 107 insertions(+), 71 deletions(-)

diff --git a/drivers/base/base.h b/drivers/base/base.h
index 2c9ae43e221..0ec372a6776 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -36,6 +36,33 @@ struct driver_private {
 };
 #define to_driver(obj) container_of(obj, struct driver_private, kobj)
 
+
+/**
+ * struct class_private - structure to hold the private to the driver core portions of the class structure.
+ *
+ * @subsys - the struct kset that defines this class.  This is the main kobject
+ * @children - list of class_devices associated with this class
+ * @devices - list of devices associated with this class
+ * @interfaces - list of class_interfaces associated with this class
+ * @class_dirs -
+ * @sem - semaphore to protect the children, devices, and interfaces lists.
+ * @class - pointer back to the struct class that this structure is associated
+ * with.
+ *
+ * This structure is the one that is the actual kobject allowing struct
+ * class to be statically allocated safely.  Nothing outside of the driver
+ * core should ever touch these fields.
+ */
+struct class_private {
+	struct kset subsys;
+	struct list_head devices;
+	struct list_head interfaces;
+	struct kset class_dirs;
+	struct semaphore sem;
+	struct class *class;
+};
+#define to_class(obj) container_of(obj, struct class_private, subsys.kobj)
+
 /* initialisation functions */
 extern int devices_init(void);
 extern int buses_init(void);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 3918d0e432d..06f09c929a9 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -21,17 +21,16 @@
 #include "base.h"
 
 #define to_class_attr(_attr) container_of(_attr, struct class_attribute, attr)
-#define to_class(obj) container_of(obj, struct class, subsys.kobj)
 
 static ssize_t class_attr_show(struct kobject *kobj, struct attribute *attr,
 			       char *buf)
 {
 	struct class_attribute *class_attr = to_class_attr(attr);
-	struct class *dc = to_class(kobj);
+	struct class_private *cp = to_class(kobj);
 	ssize_t ret = -EIO;
 
 	if (class_attr->show)
-		ret = class_attr->show(dc, buf);
+		ret = class_attr->show(cp->class, buf);
 	return ret;
 }
 
@@ -39,17 +38,18 @@ static ssize_t class_attr_store(struct kobject *kobj, struct attribute *attr,
 				const char *buf, size_t count)
 {
 	struct class_attribute *class_attr = to_class_attr(attr);
-	struct class *dc = to_class(kobj);
+	struct class_private *cp = to_class(kobj);
 	ssize_t ret = -EIO;
 
 	if (class_attr->store)
-		ret = class_attr->store(dc, buf, count);
+		ret = class_attr->store(cp->class, buf, count);
 	return ret;
 }
 
 static void class_release(struct kobject *kobj)
 {
-	struct class *class = to_class(kobj);
+	struct class_private *cp = to_class(kobj);
+	struct class *class = cp->class;
 
 	pr_debug("class '%s': release.\n", class->name);
 
@@ -78,7 +78,7 @@ int class_create_file(struct class *cls, const struct class_attribute *attr)
 {
 	int error;
 	if (cls)
-		error = sysfs_create_file(&cls->subsys.kobj, &attr->attr);
+		error = sysfs_create_file(&cls->p->subsys.kobj, &attr->attr);
 	else
 		error = -EINVAL;
 	return error;
@@ -87,21 +87,20 @@ int class_create_file(struct class *cls, const struct class_attribute *attr)
 void class_remove_file(struct class *cls, const struct class_attribute *attr)
 {
 	if (cls)
-		sysfs_remove_file(&cls->subsys.kobj, &attr->attr);
+		sysfs_remove_file(&cls->p->subsys.kobj, &attr->attr);
 }
 
 static struct class *class_get(struct class *cls)
 {
 	if (cls)
-		return container_of(kset_get(&cls->subsys),
-				    struct class, subsys);
-	return NULL;
+		kset_get(&cls->p->subsys);
+	return cls;
 }
 
 static void class_put(struct class *cls)
 {
 	if (cls)
-		kset_put(&cls->subsys);
+		kset_put(&cls->p->subsys);
 }
 
 static int add_class_attrs(struct class *cls)
@@ -136,17 +135,23 @@ static void remove_class_attrs(struct class *cls)
 
 int class_register(struct class *cls)
 {
+	struct class_private *cp;
 	int error;
 
 	pr_debug("device class '%s': registering\n", cls->name);
 
-	INIT_LIST_HEAD(&cls->devices);
-	INIT_LIST_HEAD(&cls->interfaces);
-	kset_init(&cls->class_dirs);
-	init_MUTEX(&cls->sem);
-	error = kobject_set_name(&cls->subsys.kobj, "%s", cls->name);
-	if (error)
+	cp = kzalloc(sizeof(*cp), GFP_KERNEL);
+	if (!cp)
+		return -ENOMEM;
+	INIT_LIST_HEAD(&cp->devices);
+	INIT_LIST_HEAD(&cp->interfaces);
+	kset_init(&cp->class_dirs);
+	init_MUTEX(&cp->sem);
+	error = kobject_set_name(&cp->subsys.kobj, "%s", cls->name);
+	if (error) {
+		kfree(cp);
 		return error;
+	}
 
 	/* set the default /sys/dev directory for devices of this class */
 	if (!cls->dev_kobj)
@@ -155,17 +160,21 @@ int class_register(struct class *cls)
 #if defined(CONFIG_SYSFS_DEPRECATED) && defined(CONFIG_BLOCK)
 	/* let the block class directory show up in the root of sysfs */
 	if (cls != &block_class)
-		cls->subsys.kobj.kset = class_kset;
+		cp->subsys.kobj.kset = class_kset;
 #else
-	cls->subsys.kobj.kset = class_kset;
+	cp->subsys.kobj.kset = class_kset;
 #endif
-	cls->subsys.kobj.ktype = &class_ktype;
+	cp->subsys.kobj.ktype = &class_ktype;
+	cp->class = cls;
+	cls->p = cp;
 
-	error = kset_register(&cls->subsys);
-	if (!error) {
-		error = add_class_attrs(class_get(cls));
-		class_put(cls);
+	error = kset_register(&cp->subsys);
+	if (error) {
+		kfree(cp);
+		return error;
 	}
+	error = add_class_attrs(class_get(cls));
+	class_put(cls);
 	return error;
 }
 
@@ -173,7 +182,7 @@ void class_unregister(struct class *cls)
 {
 	pr_debug("device class '%s': unregistering\n", cls->name);
 	remove_class_attrs(cls);
-	kset_unregister(&cls->subsys);
+	kset_unregister(&cls->p->subsys);
 }
 
 static void class_create_release(struct class *cls)
@@ -280,8 +289,8 @@ int class_for_each_device(struct class *class, struct device *start,
 
 	if (!class)
 		return -EINVAL;
-	down(&class->sem);
-	list_for_each_entry(dev, &class->devices, node) {
+	down(&class->p->sem);
+	list_for_each_entry(dev, &class->p->devices, node) {
 		if (start) {
 			if (start == dev)
 				start = NULL;
@@ -293,7 +302,7 @@ int class_for_each_device(struct class *class, struct device *start,
 		if (error)
 			break;
 	}
-	up(&class->sem);
+	up(&class->p->sem);
 
 	return error;
 }
@@ -330,8 +339,8 @@ struct device *class_find_device(struct class *class, struct device *start,
 	if (!class)
 		return NULL;
 
-	down(&class->sem);
-	list_for_each_entry(dev, &class->devices, node) {
+	down(&class->p->sem);
+	list_for_each_entry(dev, &class->p->devices, node) {
 		if (start) {
 			if (start == dev)
 				start = NULL;
@@ -344,7 +353,7 @@ struct device *class_find_device(struct class *class, struct device *start,
 		} else
 			put_device(dev);
 	}
-	up(&class->sem);
+	up(&class->p->sem);
 
 	return found ? dev : NULL;
 }
@@ -362,13 +371,13 @@ int class_interface_register(struct class_interface *class_intf)
 	if (!parent)
 		return -EINVAL;
 
-	down(&parent->sem);
-	list_add_tail(&class_intf->node, &parent->interfaces);
+	down(&parent->p->sem);
+	list_add_tail(&class_intf->node, &parent->p->interfaces);
 	if (class_intf->add_dev) {
-		list_for_each_entry(dev, &parent->devices, node)
+		list_for_each_entry(dev, &parent->p->devices, node)
 			class_intf->add_dev(dev, class_intf);
 	}
-	up(&parent->sem);
+	up(&parent->p->sem);
 
 	return 0;
 }
@@ -381,13 +390,13 @@ void class_interface_unregister(struct class_interface *class_intf)
 	if (!parent)
 		return;
 
-	down(&parent->sem);
+	down(&parent->p->sem);
 	list_del_init(&class_intf->node);
 	if (class_intf->remove_dev) {
-		list_for_each_entry(dev, &parent->devices, node)
+		list_for_each_entry(dev, &parent->p->devices, node)
 			class_intf->remove_dev(dev, class_intf);
 	}
-	up(&parent->sem);
+	up(&parent->p->sem);
 
 	class_put(parent);
 }
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 9f05de6f80b..64c150b5a88 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -551,7 +551,7 @@ static struct kobject *get_device_parent(struct device *dev,
 {
 	/* class devices without a parent live in /sys/class/<classname>/ */
 	if (dev->class && (!parent || parent->class != dev->class))
-		return &dev->class->subsys.kobj;
+		return &dev->class->p->subsys.kobj;
 	/* all other devices keep their parent */
 	else if (parent)
 		return &parent->kobj;
@@ -597,13 +597,13 @@ static struct kobject *get_device_parent(struct device *dev,
 			parent_kobj = &parent->kobj;
 
 		/* find our class-directory at the parent and reference it */
-		spin_lock(&dev->class->class_dirs.list_lock);
-		list_for_each_entry(k, &dev->class->class_dirs.list, entry)
+		spin_lock(&dev->class->p->class_dirs.list_lock);
+		list_for_each_entry(k, &dev->class->p->class_dirs.list, entry)
 			if (k->parent == parent_kobj) {
 				kobj = kobject_get(k);
 				break;
 			}
-		spin_unlock(&dev->class->class_dirs.list_lock);
+		spin_unlock(&dev->class->p->class_dirs.list_lock);
 		if (kobj)
 			return kobj;
 
@@ -611,7 +611,7 @@ static struct kobject *get_device_parent(struct device *dev,
 		k = kobject_create();
 		if (!k)
 			return NULL;
-		k->kset = &dev->class->class_dirs;
+		k->kset = &dev->class->p->class_dirs;
 		retval = kobject_add(k, parent_kobj, "%s", dev->class->name);
 		if (retval < 0) {
 			kobject_put(k);
@@ -630,7 +630,7 @@ static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
 {
 	/* see if we live in a "glue" directory */
 	if (!glue_dir || !dev->class ||
-	    glue_dir->kset != &dev->class->class_dirs)
+	    glue_dir->kset != &dev->class->p->class_dirs)
 		return;
 
 	kobject_put(glue_dir);
@@ -657,17 +657,17 @@ static int device_add_class_symlinks(struct device *dev)
 	if (!dev->class)
 		return 0;
 
-	error = sysfs_create_link(&dev->kobj, &dev->class->subsys.kobj,
+	error = sysfs_create_link(&dev->kobj, &dev->class->p->subsys.kobj,
 				  "subsystem");
 	if (error)
 		goto out;
 
 #ifdef CONFIG_SYSFS_DEPRECATED
 	/* stacked class devices need a symlink in the class directory */
-	if (dev->kobj.parent != &dev->class->subsys.kobj &&
+	if (dev->kobj.parent != &dev->class->p->subsys.kobj &&
 	    device_is_not_partition(dev)) {
-		error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
-					  dev->bus_id);
+		error = sysfs_create_link(&dev->class->p->subsys.kobj,
+					  &dev->kobj, dev->bus_id);
 		if (error)
 			goto out_subsys;
 	}
@@ -704,12 +704,12 @@ out_device:
 	if (dev->parent && device_is_not_partition(dev))
 		sysfs_remove_link(&dev->kobj, "device");
 out_busid:
-	if (dev->kobj.parent != &dev->class->subsys.kobj &&
+	if (dev->kobj.parent != &dev->class->p->subsys.kobj &&
 	    device_is_not_partition(dev))
-		sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id);
+		sysfs_remove_link(&dev->class->p->subsys.kobj, dev->bus_id);
 #else
 	/* link in the class directory pointing to the device */
-	error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
+	error = sysfs_create_link(&dev->class->p->subsys.kobj, &dev->kobj,
 				  dev->bus_id);
 	if (error)
 		goto out_subsys;
@@ -723,7 +723,7 @@ out_busid:
 	return 0;
 
 out_busid:
-	sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id);
+	sysfs_remove_link(&dev->class->p->subsys.kobj, dev->bus_id);
 #endif
 
 out_subsys:
@@ -749,14 +749,14 @@ static void device_remove_class_symlinks(struct device *dev)
 		sysfs_remove_link(&dev->kobj, "device");
 	}
 
-	if (dev->kobj.parent != &dev->class->subsys.kobj &&
+	if (dev->kobj.parent != &dev->class->p->subsys.kobj &&
 	    device_is_not_partition(dev))
-		sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id);
+		sysfs_remove_link(&dev->class->p->subsys.kobj, dev->bus_id);
 #else
 	if (dev->parent && device_is_not_partition(dev))
 		sysfs_remove_link(&dev->kobj, "device");
 
-	sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id);
+	sysfs_remove_link(&dev->class->p->subsys.kobj, dev->bus_id);
 #endif
 
 	sysfs_remove_link(&dev->kobj, "subsystem");
@@ -904,15 +904,16 @@ int device_add(struct device *dev)
 		klist_add_tail(&dev->knode_parent, &parent->klist_children);
 
 	if (dev->class) {
-		down(&dev->class->sem);
+		down(&dev->class->p->sem);
 		/* tie the class to the device */
-		list_add_tail(&dev->node, &dev->class->devices);
+		list_add_tail(&dev->node, &dev->class->p->devices);
 
 		/* notify any interfaces that the device is here */
-		list_for_each_entry(class_intf, &dev->class->interfaces, node)
+		list_for_each_entry(class_intf, &dev->class->p->interfaces,
+				    node)
 			if (class_intf->add_dev)
 				class_intf->add_dev(dev, class_intf);
-		up(&dev->class->sem);
+		up(&dev->class->p->sem);
 	}
  Done:
 	put_device(dev);
@@ -1013,14 +1014,15 @@ void device_del(struct device *dev)
 	if (dev->class) {
 		device_remove_class_symlinks(dev);
 
-		down(&dev->class->sem);
+		down(&dev->class->p->sem);
 		/* notify any interfaces that the device is now gone */
-		list_for_each_entry(class_intf, &dev->class->interfaces, node)
+		list_for_each_entry(class_intf, &dev->class->p->interfaces,
+				    node)
 			if (class_intf->remove_dev)
 				class_intf->remove_dev(dev, class_intf);
 		/* remove the device from the class list */
 		list_del_init(&dev->node);
-		up(&dev->class->sem);
+		up(&dev->class->p->sem);
 	}
 	device_remove_file(dev, &uevent_attr);
 	device_remove_attrs(dev);
@@ -1348,11 +1350,12 @@ int device_rename(struct device *dev, char *new_name)
 	}
 #else
 	if (dev->class) {
-		error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
-					  dev->bus_id);
+		error = sysfs_create_link(&dev->class->p->subsys.kobj,
+					  &dev->kobj, dev->bus_id);
 		if (error)
 			goto out;
-		sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
+		sysfs_remove_link(&dev->class->p->subsys.kobj,
+				  old_device_name);
 	}
 #endif
 
diff --git a/include/linux/device.h b/include/linux/device.h
index c1f72984875..b0556082179 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -35,6 +35,7 @@ struct device;
 struct device_driver;
 struct driver_private;
 struct class;
+struct class_private;
 struct bus_type;
 struct bus_type_private;
 
@@ -186,11 +187,6 @@ struct class {
 	const char		*name;
 	struct module		*owner;
 
-	struct kset		subsys;
-	struct list_head	devices;
-	struct list_head	interfaces;
-	struct kset		class_dirs;
-	struct semaphore	sem; /* locks children, devices, interfaces */
 	struct class_attribute		*class_attrs;
 	struct device_attribute		*dev_attrs;
 	struct kobject			*dev_kobj;
@@ -204,6 +200,7 @@ struct class {
 	int (*resume)(struct device *dev);
 
 	struct pm_ops *pm;
+	struct class_private *p;
 };
 
 extern struct kobject *sysfs_dev_block_kobj;
-- 
cgit v1.2.3


From 97ae69fdbaa71a8f7dbc20bf10fb349d1759152f Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 28 May 2008 09:28:39 -0700
Subject: class: rename "devices" to "class_devices" in internal class
 structure

This renames the struct class "devices" field to be "class_devices" to
make things easier when struct bus_type and struct class merge in the
future.  It also makes grepping for fields easier as well.

Based on an idea from Kay.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/base.h  |  4 ++--
 drivers/base/class.c | 10 +++++-----
 drivers/base/core.c  |  2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/base/base.h b/drivers/base/base.h
index 0ec372a6776..586c4ca7025 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -42,7 +42,7 @@ struct driver_private {
  *
  * @subsys - the struct kset that defines this class.  This is the main kobject
  * @children - list of class_devices associated with this class
- * @devices - list of devices associated with this class
+ * @class_devices - list of devices associated with this class
  * @interfaces - list of class_interfaces associated with this class
  * @class_dirs -
  * @sem - semaphore to protect the children, devices, and interfaces lists.
@@ -55,7 +55,7 @@ struct driver_private {
  */
 struct class_private {
 	struct kset subsys;
-	struct list_head devices;
+	struct list_head class_devices;
 	struct list_head interfaces;
 	struct kset class_dirs;
 	struct semaphore sem;
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 06f09c929a9..9947560def6 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -143,7 +143,7 @@ int class_register(struct class *cls)
 	cp = kzalloc(sizeof(*cp), GFP_KERNEL);
 	if (!cp)
 		return -ENOMEM;
-	INIT_LIST_HEAD(&cp->devices);
+	INIT_LIST_HEAD(&cp->class_devices);
 	INIT_LIST_HEAD(&cp->interfaces);
 	kset_init(&cp->class_dirs);
 	init_MUTEX(&cp->sem);
@@ -290,7 +290,7 @@ int class_for_each_device(struct class *class, struct device *start,
 	if (!class)
 		return -EINVAL;
 	down(&class->p->sem);
-	list_for_each_entry(dev, &class->p->devices, node) {
+	list_for_each_entry(dev, &class->p->class_devices, node) {
 		if (start) {
 			if (start == dev)
 				start = NULL;
@@ -340,7 +340,7 @@ struct device *class_find_device(struct class *class, struct device *start,
 		return NULL;
 
 	down(&class->p->sem);
-	list_for_each_entry(dev, &class->p->devices, node) {
+	list_for_each_entry(dev, &class->p->class_devices, node) {
 		if (start) {
 			if (start == dev)
 				start = NULL;
@@ -374,7 +374,7 @@ int class_interface_register(struct class_interface *class_intf)
 	down(&parent->p->sem);
 	list_add_tail(&class_intf->node, &parent->p->interfaces);
 	if (class_intf->add_dev) {
-		list_for_each_entry(dev, &parent->p->devices, node)
+		list_for_each_entry(dev, &parent->p->class_devices, node)
 			class_intf->add_dev(dev, class_intf);
 	}
 	up(&parent->p->sem);
@@ -393,7 +393,7 @@ void class_interface_unregister(struct class_interface *class_intf)
 	down(&parent->p->sem);
 	list_del_init(&class_intf->node);
 	if (class_intf->remove_dev) {
-		list_for_each_entry(dev, &parent->p->devices, node)
+		list_for_each_entry(dev, &parent->p->class_devices, node)
 			class_intf->remove_dev(dev, class_intf);
 	}
 	up(&parent->p->sem);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 64c150b5a88..52d1e71f2a4 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -906,7 +906,7 @@ int device_add(struct device *dev)
 	if (dev->class) {
 		down(&dev->class->p->sem);
 		/* tie the class to the device */
-		list_add_tail(&dev->node, &dev->class->p->devices);
+		list_add_tail(&dev->node, &dev->class->p->class_devices);
 
 		/* notify any interfaces that the device is here */
 		list_for_each_entry(class_intf, &dev->class->p->interfaces,
-- 
cgit v1.2.3


From 184f1f779d5a2e62de4a0b34842ddf8546beca8f Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 28 May 2008 09:28:39 -0700
Subject: class: rename "interfaces" to "class_interfaces" in internal class
 structure

This renames the struct class "interfaces" field to be
"class_interfaces" to make things easier when struct bus_type and struct
class merge in the future.  It also makes grepping for fields easier as
well.

Based on an idea from Kay.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/base.h  | 4 ++--
 drivers/base/class.c | 4 ++--
 drivers/base/core.c  | 8 ++++----
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/base/base.h b/drivers/base/base.h
index 586c4ca7025..670b95a1a51 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -43,7 +43,7 @@ struct driver_private {
  * @subsys - the struct kset that defines this class.  This is the main kobject
  * @children - list of class_devices associated with this class
  * @class_devices - list of devices associated with this class
- * @interfaces - list of class_interfaces associated with this class
+ * @class_interfaces - list of class_interfaces associated with this class
  * @class_dirs -
  * @sem - semaphore to protect the children, devices, and interfaces lists.
  * @class - pointer back to the struct class that this structure is associated
@@ -56,7 +56,7 @@ struct driver_private {
 struct class_private {
 	struct kset subsys;
 	struct list_head class_devices;
-	struct list_head interfaces;
+	struct list_head class_interfaces;
 	struct kset class_dirs;
 	struct semaphore sem;
 	struct class *class;
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 9947560def6..48b518e66bf 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -144,7 +144,7 @@ int class_register(struct class *cls)
 	if (!cp)
 		return -ENOMEM;
 	INIT_LIST_HEAD(&cp->class_devices);
-	INIT_LIST_HEAD(&cp->interfaces);
+	INIT_LIST_HEAD(&cp->class_interfaces);
 	kset_init(&cp->class_dirs);
 	init_MUTEX(&cp->sem);
 	error = kobject_set_name(&cp->subsys.kobj, "%s", cls->name);
@@ -372,7 +372,7 @@ int class_interface_register(struct class_interface *class_intf)
 		return -EINVAL;
 
 	down(&parent->p->sem);
-	list_add_tail(&class_intf->node, &parent->p->interfaces);
+	list_add_tail(&class_intf->node, &parent->p->class_interfaces);
 	if (class_intf->add_dev) {
 		list_for_each_entry(dev, &parent->p->class_devices, node)
 			class_intf->add_dev(dev, class_intf);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 52d1e71f2a4..76fdd41fea0 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -909,8 +909,8 @@ int device_add(struct device *dev)
 		list_add_tail(&dev->node, &dev->class->p->class_devices);
 
 		/* notify any interfaces that the device is here */
-		list_for_each_entry(class_intf, &dev->class->p->interfaces,
-				    node)
+		list_for_each_entry(class_intf,
+				    &dev->class->p->class_interfaces, node)
 			if (class_intf->add_dev)
 				class_intf->add_dev(dev, class_intf);
 		up(&dev->class->p->sem);
@@ -1016,8 +1016,8 @@ void device_del(struct device *dev)
 
 		down(&dev->class->p->sem);
 		/* notify any interfaces that the device is now gone */
-		list_for_each_entry(class_intf, &dev->class->p->interfaces,
-				    node)
+		list_for_each_entry(class_intf,
+				    &dev->class->p->class_interfaces, node)
 			if (class_intf->remove_dev)
 				class_intf->remove_dev(dev, class_intf);
 		/* remove the device from the class list */
-- 
cgit v1.2.3


From 1fbfee6c6dc0f4a4c587b6b163ee79643fc9aaa7 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 28 May 2008 09:28:39 -0700
Subject: class: rename "subsys" to "class_subsys" in internal class structure

This renames the struct class "subsys" field to be "class_subsys" to
make things easier when struct bus_type and struct class merge in the
future.  It also makes grepping for fields easier as well.

Based on an idea from Kay.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/base.h  |  7 ++++---
 drivers/base/class.c | 23 ++++++++++++-----------
 drivers/base/core.c  | 31 +++++++++++++++++--------------
 3 files changed, 33 insertions(+), 28 deletions(-)

diff --git a/drivers/base/base.h b/drivers/base/base.h
index 670b95a1a51..a77d4bd2ea6 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -40,7 +40,7 @@ struct driver_private {
 /**
  * struct class_private - structure to hold the private to the driver core portions of the class structure.
  *
- * @subsys - the struct kset that defines this class.  This is the main kobject
+ * @class_subsys - the struct kset that defines this class.  This is the main kobject
  * @children - list of class_devices associated with this class
  * @class_devices - list of devices associated with this class
  * @class_interfaces - list of class_interfaces associated with this class
@@ -54,14 +54,15 @@ struct driver_private {
  * core should ever touch these fields.
  */
 struct class_private {
-	struct kset subsys;
+	struct kset class_subsys;
 	struct list_head class_devices;
 	struct list_head class_interfaces;
 	struct kset class_dirs;
 	struct semaphore sem;
 	struct class *class;
 };
-#define to_class(obj) container_of(obj, struct class_private, subsys.kobj)
+#define to_class(obj)	\
+	container_of(obj, struct class_private, class_subsys.kobj)
 
 /* initialisation functions */
 extern int devices_init(void);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 48b518e66bf..86778b86496 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -70,7 +70,7 @@ static struct kobj_type class_ktype = {
 	.release	= class_release,
 };
 
-/* Hotplug events for classes go to the class_obj subsys */
+/* Hotplug events for classes go to the class class_subsys */
 static struct kset *class_kset;
 
 
@@ -78,7 +78,8 @@ int class_create_file(struct class *cls, const struct class_attribute *attr)
 {
 	int error;
 	if (cls)
-		error = sysfs_create_file(&cls->p->subsys.kobj, &attr->attr);
+		error = sysfs_create_file(&cls->p->class_subsys.kobj,
+					  &attr->attr);
 	else
 		error = -EINVAL;
 	return error;
@@ -87,20 +88,20 @@ int class_create_file(struct class *cls, const struct class_attribute *attr)
 void class_remove_file(struct class *cls, const struct class_attribute *attr)
 {
 	if (cls)
-		sysfs_remove_file(&cls->p->subsys.kobj, &attr->attr);
+		sysfs_remove_file(&cls->p->class_subsys.kobj, &attr->attr);
 }
 
 static struct class *class_get(struct class *cls)
 {
 	if (cls)
-		kset_get(&cls->p->subsys);
+		kset_get(&cls->p->class_subsys);
 	return cls;
 }
 
 static void class_put(struct class *cls)
 {
 	if (cls)
-		kset_put(&cls->p->subsys);
+		kset_put(&cls->p->class_subsys);
 }
 
 static int add_class_attrs(struct class *cls)
@@ -147,7 +148,7 @@ int class_register(struct class *cls)
 	INIT_LIST_HEAD(&cp->class_interfaces);
 	kset_init(&cp->class_dirs);
 	init_MUTEX(&cp->sem);
-	error = kobject_set_name(&cp->subsys.kobj, "%s", cls->name);
+	error = kobject_set_name(&cp->class_subsys.kobj, "%s", cls->name);
 	if (error) {
 		kfree(cp);
 		return error;
@@ -160,15 +161,15 @@ int class_register(struct class *cls)
 #if defined(CONFIG_SYSFS_DEPRECATED) && defined(CONFIG_BLOCK)
 	/* let the block class directory show up in the root of sysfs */
 	if (cls != &block_class)
-		cp->subsys.kobj.kset = class_kset;
+		cp->class_subsys.kobj.kset = class_kset;
 #else
-	cp->subsys.kobj.kset = class_kset;
+	cp->class_subsys.kobj.kset = class_kset;
 #endif
-	cp->subsys.kobj.ktype = &class_ktype;
+	cp->class_subsys.kobj.ktype = &class_ktype;
 	cp->class = cls;
 	cls->p = cp;
 
-	error = kset_register(&cp->subsys);
+	error = kset_register(&cp->class_subsys);
 	if (error) {
 		kfree(cp);
 		return error;
@@ -182,7 +183,7 @@ void class_unregister(struct class *cls)
 {
 	pr_debug("device class '%s': unregistering\n", cls->name);
 	remove_class_attrs(cls);
-	kset_unregister(&cls->p->subsys);
+	kset_unregister(&cls->p->class_subsys);
 }
 
 static void class_create_release(struct class *cls)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 76fdd41fea0..6e1cff296d9 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -551,7 +551,7 @@ static struct kobject *get_device_parent(struct device *dev,
 {
 	/* class devices without a parent live in /sys/class/<classname>/ */
 	if (dev->class && (!parent || parent->class != dev->class))
-		return &dev->class->p->subsys.kobj;
+		return &dev->class->p->class_subsys.kobj;
 	/* all other devices keep their parent */
 	else if (parent)
 		return &parent->kobj;
@@ -657,16 +657,17 @@ static int device_add_class_symlinks(struct device *dev)
 	if (!dev->class)
 		return 0;
 
-	error = sysfs_create_link(&dev->kobj, &dev->class->p->subsys.kobj,
+	error = sysfs_create_link(&dev->kobj,
+				  &dev->class->p->class_subsys.kobj,
 				  "subsystem");
 	if (error)
 		goto out;
 
 #ifdef CONFIG_SYSFS_DEPRECATED
 	/* stacked class devices need a symlink in the class directory */
-	if (dev->kobj.parent != &dev->class->p->subsys.kobj &&
+	if (dev->kobj.parent != &dev->class->p->class_subsys.kobj &&
 	    device_is_not_partition(dev)) {
-		error = sysfs_create_link(&dev->class->p->subsys.kobj,
+		error = sysfs_create_link(&dev->class->p->class_subsys.kobj,
 					  &dev->kobj, dev->bus_id);
 		if (error)
 			goto out_subsys;
@@ -704,13 +705,14 @@ out_device:
 	if (dev->parent && device_is_not_partition(dev))
 		sysfs_remove_link(&dev->kobj, "device");
 out_busid:
-	if (dev->kobj.parent != &dev->class->p->subsys.kobj &&
+	if (dev->kobj.parent != &dev->class->p->class_subsys.kobj &&
 	    device_is_not_partition(dev))
-		sysfs_remove_link(&dev->class->p->subsys.kobj, dev->bus_id);
+		sysfs_remove_link(&dev->class->p->class_subsys.kobj,
+				  dev->bus_id);
 #else
 	/* link in the class directory pointing to the device */
-	error = sysfs_create_link(&dev->class->p->subsys.kobj, &dev->kobj,
-				  dev->bus_id);
+	error = sysfs_create_link(&dev->class->p->class_subsys.kobj,
+				  &dev->kobj, dev->bus_id);
 	if (error)
 		goto out_subsys;
 
@@ -723,7 +725,7 @@ out_busid:
 	return 0;
 
 out_busid:
-	sysfs_remove_link(&dev->class->p->subsys.kobj, dev->bus_id);
+	sysfs_remove_link(&dev->class->p->class_subsys.kobj, dev->bus_id);
 #endif
 
 out_subsys:
@@ -749,14 +751,15 @@ static void device_remove_class_symlinks(struct device *dev)
 		sysfs_remove_link(&dev->kobj, "device");
 	}
 
-	if (dev->kobj.parent != &dev->class->p->subsys.kobj &&
+	if (dev->kobj.parent != &dev->class->p->class_subsys.kobj &&
 	    device_is_not_partition(dev))
-		sysfs_remove_link(&dev->class->p->subsys.kobj, dev->bus_id);
+		sysfs_remove_link(&dev->class->p->class_subsys.kobj,
+				  dev->bus_id);
 #else
 	if (dev->parent && device_is_not_partition(dev))
 		sysfs_remove_link(&dev->kobj, "device");
 
-	sysfs_remove_link(&dev->class->p->subsys.kobj, dev->bus_id);
+	sysfs_remove_link(&dev->class->p->class_subsys.kobj, dev->bus_id);
 #endif
 
 	sysfs_remove_link(&dev->kobj, "subsystem");
@@ -1350,11 +1353,11 @@ int device_rename(struct device *dev, char *new_name)
 	}
 #else
 	if (dev->class) {
-		error = sysfs_create_link(&dev->class->p->subsys.kobj,
+		error = sysfs_create_link(&dev->class->p->class_subsys.kobj,
 					  &dev->kobj, dev->bus_id);
 		if (error)
 			goto out;
-		sysfs_remove_link(&dev->class->p->subsys.kobj,
+		sysfs_remove_link(&dev->class->p->class_subsys.kobj,
 				  old_device_name);
 	}
 #endif
-- 
cgit v1.2.3


From d9a0157328507c5f563e16a583cd0a063854aebb Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 28 May 2008 09:28:39 -0700
Subject: class: rename "sem" to "class_sem" in internal class structure

This renames the struct class "sem" field to be "class_sem" to make
things easier when struct bus_type and struct class merge in the future.
It also makes grepping for fields easier as well.

Based on an idea from Kay.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/base.h  |  4 ++--
 drivers/base/class.c | 22 +++++++++++-----------
 drivers/base/core.c  |  8 ++++----
 3 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/base/base.h b/drivers/base/base.h
index a77d4bd2ea6..4435732437a 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -45,7 +45,7 @@ struct driver_private {
  * @class_devices - list of devices associated with this class
  * @class_interfaces - list of class_interfaces associated with this class
  * @class_dirs -
- * @sem - semaphore to protect the children, devices, and interfaces lists.
+ * @class_sem - semaphore to protect the children, devices, and interfaces lists.
  * @class - pointer back to the struct class that this structure is associated
  * with.
  *
@@ -58,7 +58,7 @@ struct class_private {
 	struct list_head class_devices;
 	struct list_head class_interfaces;
 	struct kset class_dirs;
-	struct semaphore sem;
+	struct semaphore class_sem;
 	struct class *class;
 };
 #define to_class(obj)	\
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 86778b86496..d24d21114cc 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -147,7 +147,7 @@ int class_register(struct class *cls)
 	INIT_LIST_HEAD(&cp->class_devices);
 	INIT_LIST_HEAD(&cp->class_interfaces);
 	kset_init(&cp->class_dirs);
-	init_MUTEX(&cp->sem);
+	init_MUTEX(&cp->class_sem);
 	error = kobject_set_name(&cp->class_subsys.kobj, "%s", cls->name);
 	if (error) {
 		kfree(cp);
@@ -278,7 +278,7 @@ char *make_class_name(const char *name, struct kobject *kobj)
  * We check the return of @fn each time. If it returns anything
  * other than 0, we break out and return that value.
  *
- * Note, we hold class->sem in this function, so it can not be
+ * Note, we hold class->class_sem in this function, so it can not be
  * re-acquired in @fn, otherwise it will self-deadlocking. For
  * example, calls to add or remove class members would be verboten.
  */
@@ -290,7 +290,7 @@ int class_for_each_device(struct class *class, struct device *start,
 
 	if (!class)
 		return -EINVAL;
-	down(&class->p->sem);
+	down(&class->p->class_sem);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
 		if (start) {
 			if (start == dev)
@@ -303,7 +303,7 @@ int class_for_each_device(struct class *class, struct device *start,
 		if (error)
 			break;
 	}
-	up(&class->p->sem);
+	up(&class->p->class_sem);
 
 	return error;
 }
@@ -326,7 +326,7 @@ EXPORT_SYMBOL_GPL(class_for_each_device);
  *
  * Note, you will need to drop the reference with put_device() after use.
  *
- * We hold class->sem in this function, so it can not be
+ * We hold class->class_sem in this function, so it can not be
  * re-acquired in @match, otherwise it will self-deadlocking. For
  * example, calls to add or remove class members would be verboten.
  */
@@ -340,7 +340,7 @@ struct device *class_find_device(struct class *class, struct device *start,
 	if (!class)
 		return NULL;
 
-	down(&class->p->sem);
+	down(&class->p->class_sem);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
 		if (start) {
 			if (start == dev)
@@ -354,7 +354,7 @@ struct device *class_find_device(struct class *class, struct device *start,
 		} else
 			put_device(dev);
 	}
-	up(&class->p->sem);
+	up(&class->p->class_sem);
 
 	return found ? dev : NULL;
 }
@@ -372,13 +372,13 @@ int class_interface_register(struct class_interface *class_intf)
 	if (!parent)
 		return -EINVAL;
 
-	down(&parent->p->sem);
+	down(&parent->p->class_sem);
 	list_add_tail(&class_intf->node, &parent->p->class_interfaces);
 	if (class_intf->add_dev) {
 		list_for_each_entry(dev, &parent->p->class_devices, node)
 			class_intf->add_dev(dev, class_intf);
 	}
-	up(&parent->p->sem);
+	up(&parent->p->class_sem);
 
 	return 0;
 }
@@ -391,13 +391,13 @@ void class_interface_unregister(struct class_interface *class_intf)
 	if (!parent)
 		return;
 
-	down(&parent->p->sem);
+	down(&parent->p->class_sem);
 	list_del_init(&class_intf->node);
 	if (class_intf->remove_dev) {
 		list_for_each_entry(dev, &parent->p->class_devices, node)
 			class_intf->remove_dev(dev, class_intf);
 	}
-	up(&parent->p->sem);
+	up(&parent->p->class_sem);
 
 	class_put(parent);
 }
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 6e1cff296d9..b90ae6f7be8 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -907,7 +907,7 @@ int device_add(struct device *dev)
 		klist_add_tail(&dev->knode_parent, &parent->klist_children);
 
 	if (dev->class) {
-		down(&dev->class->p->sem);
+		down(&dev->class->p->class_sem);
 		/* tie the class to the device */
 		list_add_tail(&dev->node, &dev->class->p->class_devices);
 
@@ -916,7 +916,7 @@ int device_add(struct device *dev)
 				    &dev->class->p->class_interfaces, node)
 			if (class_intf->add_dev)
 				class_intf->add_dev(dev, class_intf);
-		up(&dev->class->p->sem);
+		up(&dev->class->p->class_sem);
 	}
  Done:
 	put_device(dev);
@@ -1017,7 +1017,7 @@ void device_del(struct device *dev)
 	if (dev->class) {
 		device_remove_class_symlinks(dev);
 
-		down(&dev->class->p->sem);
+		down(&dev->class->p->class_sem);
 		/* notify any interfaces that the device is now gone */
 		list_for_each_entry(class_intf,
 				    &dev->class->p->class_interfaces, node)
@@ -1025,7 +1025,7 @@ void device_del(struct device *dev)
 				class_intf->remove_dev(dev, class_intf);
 		/* remove the device from the class list */
 		list_del_init(&dev->node);
-		up(&dev->class->p->sem);
+		up(&dev->class->p->class_sem);
 	}
 	device_remove_file(dev, &uevent_attr);
 	device_remove_attrs(dev);
-- 
cgit v1.2.3


From 1e41250863cd4de5ffa0678c405d001ca5b62796 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 28 May 2008 09:28:39 -0700
Subject: class: fix docbook comments for class_private structure

Removes a field that has been deleted, and adds a description fo the
class_dirs field which was previously undocumented.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/base.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/base/base.h b/drivers/base/base.h
index 4435732437a..c035dc23266 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -41,10 +41,9 @@ struct driver_private {
  * struct class_private - structure to hold the private to the driver core portions of the class structure.
  *
  * @class_subsys - the struct kset that defines this class.  This is the main kobject
- * @children - list of class_devices associated with this class
  * @class_devices - list of devices associated with this class
  * @class_interfaces - list of class_interfaces associated with this class
- * @class_dirs -
+ * @class_dirs - "glue" directory for virtual devices associated with this class
  * @class_sem - semaphore to protect the children, devices, and interfaces lists.
  * @class - pointer back to the struct class that this structure is associated
  * with.
-- 
cgit v1.2.3


From d2a3b9146e4f40c2e872d7567c996ef95083d802 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Wed, 28 May 2008 09:28:39 -0700
Subject: class: add lockdep infrastructure

This adds the infrastructure to properly handle lockdep issues when the
internal class semaphore is changed to a mutex.

Matthew wrote the original patch, and Greg fixed it up to work properly
with the class_create() function.


From: Matthew Wilcox <matthew@wil.cx>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/class.c   | 11 ++++++-----
 include/linux/device.h | 25 +++++++++++++++++++++++--
 2 files changed, 29 insertions(+), 7 deletions(-)

diff --git a/drivers/base/class.c b/drivers/base/class.c
index d24d21114cc..89000566690 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -134,7 +134,7 @@ static void remove_class_attrs(struct class *cls)
 	}
 }
 
-int class_register(struct class *cls)
+int __class_register(struct class *cls, struct lock_class_key *key)
 {
 	struct class_private *cp;
 	int error;
@@ -178,6 +178,7 @@ int class_register(struct class *cls)
 	class_put(cls);
 	return error;
 }
+EXPORT_SYMBOL_GPL(__class_register);
 
 void class_unregister(struct class *cls)
 {
@@ -203,7 +204,8 @@ static void class_create_release(struct class *cls)
  * Note, the pointer created here is to be destroyed when finished by
  * making a call to class_destroy().
  */
-struct class *class_create(struct module *owner, const char *name)
+struct class *__class_create(struct module *owner, const char *name,
+			     struct lock_class_key *key)
 {
 	struct class *cls;
 	int retval;
@@ -218,7 +220,7 @@ struct class *class_create(struct module *owner, const char *name)
 	cls->owner = owner;
 	cls->class_release = class_create_release;
 
-	retval = class_register(cls);
+	retval = __class_register(cls, key);
 	if (retval)
 		goto error;
 
@@ -228,6 +230,7 @@ error:
 	kfree(cls);
 	return ERR_PTR(retval);
 }
+EXPORT_SYMBOL_GPL(__class_create);
 
 /**
  * class_destroy - destroys a struct class structure
@@ -412,9 +415,7 @@ int __init classes_init(void)
 
 EXPORT_SYMBOL_GPL(class_create_file);
 EXPORT_SYMBOL_GPL(class_remove_file);
-EXPORT_SYMBOL_GPL(class_register);
 EXPORT_SYMBOL_GPL(class_unregister);
-EXPORT_SYMBOL_GPL(class_create);
 EXPORT_SYMBOL_GPL(class_destroy);
 
 EXPORT_SYMBOL_GPL(class_interface_register);
diff --git a/include/linux/device.h b/include/linux/device.h
index b0556082179..0e1d24c2ed4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -16,6 +16,7 @@
 #include <linux/kobject.h>
 #include <linux/klist.h>
 #include <linux/list.h>
+#include <linux/lockdep.h>
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/module.h>
@@ -205,8 +206,18 @@ struct class {
 
 extern struct kobject *sysfs_dev_block_kobj;
 extern struct kobject *sysfs_dev_char_kobj;
-extern int __must_check class_register(struct class *class);
+extern int __must_check __class_register(struct class *class,
+					 struct lock_class_key *key);
 extern void class_unregister(struct class *class);
+
+/* This is a #define to keep the compiler from merging different
+ * instances of the __key variable */
+#define class_register(class)			\
+({						\
+	static struct lock_class_key __key;	\
+	__class_register(class, &__key);	\
+})
+
 extern int class_for_each_device(struct class *class, struct device *start,
 				 void *data,
 				 int (*fn)(struct device *dev, void *data));
@@ -239,9 +250,19 @@ struct class_interface {
 extern int __must_check class_interface_register(struct class_interface *);
 extern void class_interface_unregister(struct class_interface *);
 
-extern struct class *class_create(struct module *owner, const char *name);
+extern struct class * __must_check __class_create(struct module *owner,
+						  const char *name,
+						  struct lock_class_key *key);
 extern void class_destroy(struct class *cls);
 
+/* This is a #define to keep the compiler from merging different
+ * instances of the __key variable */
+#define class_create(owner, name)		\
+({						\
+	static struct lock_class_key __key;	\
+	__class_create(owner, name, &__key);	\
+})
+
 /*
  * The type of device, "struct device" is embedded in. A class
  * or bus can contain devices of different types
-- 
cgit v1.2.3


From f75b1c60fc1e53c4004a79ea0be071aa3318cdcc Mon Sep 17 00:00:00 2001
From: Dave Young <hidave.darkstar@gmail.com>
Date: Wed, 28 May 2008 09:28:39 -0700
Subject: class: change internal semaphore to a mutex

Now that the lockdep infrastructure in the class core is in place, we
should be able to properly change the internal class semaphore to be a
mutex.

David wrote the original patch, and Greg fixed it up to apply properly
due to all of the recent changes in this area.

From: Dave Young <hidave.darkstar@gmail.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/base.h  |  4 ++--
 drivers/base/class.c | 23 ++++++++++++-----------
 drivers/base/core.c  |  9 +++++----
 3 files changed, 19 insertions(+), 17 deletions(-)

diff --git a/drivers/base/base.h b/drivers/base/base.h
index c035dc23266..31dc0cd84af 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -44,7 +44,7 @@ struct driver_private {
  * @class_devices - list of devices associated with this class
  * @class_interfaces - list of class_interfaces associated with this class
  * @class_dirs - "glue" directory for virtual devices associated with this class
- * @class_sem - semaphore to protect the children, devices, and interfaces lists.
+ * @class_mutex - mutex to protect the children, devices, and interfaces lists.
  * @class - pointer back to the struct class that this structure is associated
  * with.
  *
@@ -57,7 +57,7 @@ struct class_private {
 	struct list_head class_devices;
 	struct list_head class_interfaces;
 	struct kset class_dirs;
-	struct semaphore class_sem;
+	struct mutex class_mutex;
 	struct class *class;
 };
 #define to_class(obj)	\
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 89000566690..839d27cecb3 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -18,6 +18,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/genhd.h>
+#include <linux/mutex.h>
 #include "base.h"
 
 #define to_class_attr(_attr) container_of(_attr, struct class_attribute, attr)
@@ -147,7 +148,7 @@ int __class_register(struct class *cls, struct lock_class_key *key)
 	INIT_LIST_HEAD(&cp->class_devices);
 	INIT_LIST_HEAD(&cp->class_interfaces);
 	kset_init(&cp->class_dirs);
-	init_MUTEX(&cp->class_sem);
+	__mutex_init(&cp->class_mutex, "struct class mutex", key);
 	error = kobject_set_name(&cp->class_subsys.kobj, "%s", cls->name);
 	if (error) {
 		kfree(cp);
@@ -281,7 +282,7 @@ char *make_class_name(const char *name, struct kobject *kobj)
  * We check the return of @fn each time. If it returns anything
  * other than 0, we break out and return that value.
  *
- * Note, we hold class->class_sem in this function, so it can not be
+ * Note, we hold class->class_mutex in this function, so it can not be
  * re-acquired in @fn, otherwise it will self-deadlocking. For
  * example, calls to add or remove class members would be verboten.
  */
@@ -293,7 +294,7 @@ int class_for_each_device(struct class *class, struct device *start,
 
 	if (!class)
 		return -EINVAL;
-	down(&class->p->class_sem);
+	mutex_lock(&class->p->class_mutex);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
 		if (start) {
 			if (start == dev)
@@ -306,7 +307,7 @@ int class_for_each_device(struct class *class, struct device *start,
 		if (error)
 			break;
 	}
-	up(&class->p->class_sem);
+	mutex_unlock(&class->p->class_mutex);
 
 	return error;
 }
@@ -329,7 +330,7 @@ EXPORT_SYMBOL_GPL(class_for_each_device);
  *
  * Note, you will need to drop the reference with put_device() after use.
  *
- * We hold class->class_sem in this function, so it can not be
+ * We hold class->class_mutex in this function, so it can not be
  * re-acquired in @match, otherwise it will self-deadlocking. For
  * example, calls to add or remove class members would be verboten.
  */
@@ -343,7 +344,7 @@ struct device *class_find_device(struct class *class, struct device *start,
 	if (!class)
 		return NULL;
 
-	down(&class->p->class_sem);
+	mutex_lock(&class->p->class_mutex);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
 		if (start) {
 			if (start == dev)
@@ -357,7 +358,7 @@ struct device *class_find_device(struct class *class, struct device *start,
 		} else
 			put_device(dev);
 	}
-	up(&class->p->class_sem);
+	mutex_unlock(&class->p->class_mutex);
 
 	return found ? dev : NULL;
 }
@@ -375,13 +376,13 @@ int class_interface_register(struct class_interface *class_intf)
 	if (!parent)
 		return -EINVAL;
 
-	down(&parent->p->class_sem);
+	mutex_lock(&parent->p->class_mutex);
 	list_add_tail(&class_intf->node, &parent->p->class_interfaces);
 	if (class_intf->add_dev) {
 		list_for_each_entry(dev, &parent->p->class_devices, node)
 			class_intf->add_dev(dev, class_intf);
 	}
-	up(&parent->p->class_sem);
+	mutex_unlock(&parent->p->class_mutex);
 
 	return 0;
 }
@@ -394,13 +395,13 @@ void class_interface_unregister(struct class_interface *class_intf)
 	if (!parent)
 		return;
 
-	down(&parent->p->class_sem);
+	mutex_lock(&parent->p->class_mutex);
 	list_del_init(&class_intf->node);
 	if (class_intf->remove_dev) {
 		list_for_each_entry(dev, &parent->p->class_devices, node)
 			class_intf->remove_dev(dev, class_intf);
 	}
-	up(&parent->p->class_sem);
+	mutex_unlock(&parent->p->class_mutex);
 
 	class_put(parent);
 }
diff --git a/drivers/base/core.c b/drivers/base/core.c
index b90ae6f7be8..c05b1159023 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -21,6 +21,7 @@
 #include <linux/genhd.h>
 #include <linux/kallsyms.h>
 #include <linux/semaphore.h>
+#include <linux/mutex.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -907,7 +908,7 @@ int device_add(struct device *dev)
 		klist_add_tail(&dev->knode_parent, &parent->klist_children);
 
 	if (dev->class) {
-		down(&dev->class->p->class_sem);
+		mutex_lock(&dev->class->p->class_mutex);
 		/* tie the class to the device */
 		list_add_tail(&dev->node, &dev->class->p->class_devices);
 
@@ -916,7 +917,7 @@ int device_add(struct device *dev)
 				    &dev->class->p->class_interfaces, node)
 			if (class_intf->add_dev)
 				class_intf->add_dev(dev, class_intf);
-		up(&dev->class->p->class_sem);
+		mutex_unlock(&dev->class->p->class_mutex);
 	}
  Done:
 	put_device(dev);
@@ -1017,7 +1018,7 @@ void device_del(struct device *dev)
 	if (dev->class) {
 		device_remove_class_symlinks(dev);
 
-		down(&dev->class->p->class_sem);
+		mutex_lock(&dev->class->p->class_mutex);
 		/* notify any interfaces that the device is now gone */
 		list_for_each_entry(class_intf,
 				    &dev->class->p->class_interfaces, node)
@@ -1025,7 +1026,7 @@ void device_del(struct device *dev)
 				class_intf->remove_dev(dev, class_intf);
 		/* remove the device from the class list */
 		list_del_init(&dev->node);
-		up(&dev->class->p->class_sem);
+		mutex_unlock(&dev->class->p->class_mutex);
 	}
 	device_remove_file(dev, &uevent_attr);
 	device_remove_attrs(dev);
-- 
cgit v1.2.3


From aab0de245150c09e61c30962feb16aacde508dc3 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Fri, 2 May 2008 06:02:41 +0200
Subject: driver core: remove KOBJ_NAME_LEN define

Kobjects do not have a limit in name size since a while, so stop
pretending that they do.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/arm/plat-omap/mailbox.c        | 2 +-
 arch/sparc64/kernel/vio.c           | 2 +-
 drivers/message/fusion/mptbase.c    | 3 ++-
 drivers/message/fusion/mptbase.h    | 4 ++--
 drivers/message/fusion/mptfc.c      | 4 ++--
 drivers/pci/hotplug/acpiphp.h       | 4 ++--
 drivers/scsi/hosts.c                | 4 ++--
 drivers/scsi/scsi_transport_fc.c    | 9 +++++----
 drivers/scsi/scsi_transport_iscsi.c | 4 ++--
 fs/partitions/check.c               | 2 +-
 include/linux/device.h              | 3 +--
 include/linux/kobject.h             | 1 -
 include/linux/spi/spi.h             | 2 +-
 include/scsi/scsi_host.h            | 2 +-
 include/scsi/scsi_transport_fc.h    | 4 ++--
 include/scsi/scsi_transport_iscsi.h | 2 +-
 16 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 6f33f58bca4..848fdcafaa2 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -334,7 +334,7 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 	}
 
 	mbox->dev.class = &omap_mbox_class;
-	strlcpy(mbox->dev.bus_id, mbox->name, KOBJ_NAME_LEN);
+	strlcpy(mbox->dev.bus_id, mbox->name, BUS_ID_SIZE);
 	dev_set_drvdata(&mbox->dev, mbox);
 
 	ret = device_register(&mbox->dev);
diff --git a/arch/sparc64/kernel/vio.c b/arch/sparc64/kernel/vio.c
index e78b3517940..ecbb8b618b8 100644
--- a/arch/sparc64/kernel/vio.c
+++ b/arch/sparc64/kernel/vio.c
@@ -224,7 +224,7 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	if (!strcmp(type, "domain-services-port"))
 		bus_id_name = "ds";
 
-	if (strlen(bus_id_name) >= KOBJ_NAME_LEN - 4) {
+	if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
 		printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
 		       bus_id_name);
 		return NULL;
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 75e599b85b6..34402c47027 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1670,7 +1670,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
 	spin_lock_init(&ioc->fault_reset_work_lock);
 
-	snprintf(ioc->reset_work_q_name, KOBJ_NAME_LEN, "mpt_poll_%d", ioc->id);
+	snprintf(ioc->reset_work_q_name, sizeof(ioc->reset_work_q_name),
+		 "mpt_poll_%d", ioc->id);
 	ioc->reset_work_q =
 		create_singlethread_workqueue(ioc->reset_work_q_name);
 	if (!ioc->reset_work_q) {
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 6adab648dbb..dff048cfa10 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -707,12 +707,12 @@ typedef struct _MPT_ADAPTER
 	u8			 fc_link_speed[2];
 	spinlock_t		 fc_rescan_work_lock;
 	struct work_struct	 fc_rescan_work;
-	char			 fc_rescan_work_q_name[KOBJ_NAME_LEN];
+	char			 fc_rescan_work_q_name[20];
 	struct workqueue_struct *fc_rescan_work_q;
 	struct scsi_cmnd	**ScsiLookup;
 	spinlock_t		  scsi_lookup_lock;
 
-	char			 reset_work_q_name[KOBJ_NAME_LEN];
+	char			 reset_work_q_name[20];
 	struct workqueue_struct *reset_work_q;
 	struct delayed_work	 fault_reset_work;
 	spinlock_t		 fault_reset_work_lock;
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index fc31ca6829d..b36cae9ec6d 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1326,8 +1326,8 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* initialize workqueue */
 
-	snprintf(ioc->fc_rescan_work_q_name, KOBJ_NAME_LEN, "mptfc_wq_%d",
-		sh->host_no);
+	snprintf(ioc->fc_rescan_work_q_name, sizeof(ioc->fc_rescan_work_q_name),
+		 "mptfc_wq_%d", sh->host_no);
 	ioc->fc_rescan_work_q =
 		create_singlethread_workqueue(ioc->fc_rescan_work_q_name);
 	if (!ioc->fc_rescan_work_q)
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index eecf7cbf413..5a58b075dd8 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -36,7 +36,7 @@
 #define _ACPIPHP_H
 
 #include <linux/acpi.h>
-#include <linux/kobject.h>	/* for KOBJ_NAME_LEN */
+#include <linux/kobject.h>
 #include <linux/mutex.h>
 #include <linux/pci_hotplug.h>
 
@@ -51,7 +51,7 @@
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
 /* name size which is used for entries in pcihpfs */
-#define SLOT_NAME_SIZE	KOBJ_NAME_LEN		/* {_SUN} */
+#define SLOT_NAME_SIZE	20		/* {_SUN} */
 
 struct acpiphp_bridge;
 struct acpiphp_slot;
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 78dad28b70d..fed0b02ebc1 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -232,8 +232,8 @@ int scsi_add_host(struct Scsi_Host *shost, struct device *dev)
 	}
 
 	if (shost->transportt->create_work_queue) {
-		snprintf(shost->work_q_name, KOBJ_NAME_LEN, "scsi_wq_%d",
-			shost->host_no);
+		snprintf(shost->work_q_name, sizeof(shost->work_q_name),
+			 "scsi_wq_%d", shost->host_no);
 		shost->work_q = create_singlethread_workqueue(
 					shost->work_q_name);
 		if (!shost->work_q) {
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 5fd64e70029..a272b9a2c86 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -417,15 +417,16 @@ static int fc_host_setup(struct transport_container *tc, struct device *dev,
 	fc_host->next_vport_number = 0;
 	fc_host->npiv_vports_inuse = 0;
 
-	snprintf(fc_host->work_q_name, KOBJ_NAME_LEN, "fc_wq_%d",
-		shost->host_no);
+	snprintf(fc_host->work_q_name, sizeof(fc_host->work_q_name),
+		 "fc_wq_%d", shost->host_no);
 	fc_host->work_q = create_singlethread_workqueue(
 					fc_host->work_q_name);
 	if (!fc_host->work_q)
 		return -ENOMEM;
 
-	snprintf(fc_host->devloss_work_q_name, KOBJ_NAME_LEN, "fc_dl_%d",
-		shost->host_no);
+	snprintf(fc_host->devloss_work_q_name,
+		 sizeof(fc_host->devloss_work_q_name),
+		 "fc_dl_%d", shost->host_no);
 	fc_host->devloss_work_q = create_singlethread_workqueue(
 					fc_host->devloss_work_q_name);
 	if (!fc_host->devloss_work_q) {
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 06748f318cd..043c3921164 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -247,8 +247,8 @@ static int iscsi_setup_host(struct transport_container *tc, struct device *dev,
 	atomic_set(&ihost->nr_scans, 0);
 	mutex_init(&ihost->mutex);
 
-	snprintf(ihost->scan_workq_name, KOBJ_NAME_LEN, "iscsi_scan_%d",
-		shost->host_no);
+	snprintf(ihost->scan_workq_name, sizeof(ihost->scan_workq_name),
+		 "iscsi_scan_%d", shost->host_no);
 	ihost->scan_workq = create_singlethread_workqueue(
 						ihost->scan_workq_name);
 	if (!ihost->scan_workq)
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 6149e4b58c8..efef715135d 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -401,7 +401,7 @@ void register_disk(struct gendisk *disk)
 	disk->dev.parent = disk->driverfs_dev;
 	disk->dev.devt = MKDEV(disk->major, disk->first_minor);
 
-	strlcpy(disk->dev.bus_id, disk->disk_name, KOBJ_NAME_LEN);
+	strlcpy(disk->dev.bus_id, disk->disk_name, BUS_ID_SIZE);
 	/* ewww... some of these buggers have / in the name... */
 	s = strchr(disk->dev.bus_id, '/');
 	if (s)
diff --git a/include/linux/device.h b/include/linux/device.h
index 0e1d24c2ed4..fba1bb0d175 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -29,8 +29,7 @@
 /* DEVICE_NAME_HALF is really less than half to accommodate slop */
 #define DEVICE_NAME_HALF	__stringify(20)
 #define DEVICE_ID_SIZE		32
-#define BUS_ID_SIZE		KOBJ_NAME_LEN
-
+#define BUS_ID_SIZE		20
 
 struct device;
 struct device_driver;
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 39e709f88aa..d542faa6cb4 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -26,7 +26,6 @@
 #include <linux/wait.h>
 #include <asm/atomic.h>
 
-#define KOBJ_NAME_LEN			20
 #define UEVENT_HELPER_PATH_LEN		256
 #define UEVENT_NUM_ENVP			32	/* number of env pointers */
 #define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 387e428f1cd..b9a76c97208 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -733,7 +733,7 @@ struct spi_board_info {
 	 * controller_data goes to spi_device.controller_data,
 	 * irq is copied too
 	 */
-	char		modalias[KOBJ_NAME_LEN];
+	char		modalias[32];
 	const void	*platform_data;
 	void		*controller_data;
 	int		irq;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 1834fdfe82a..a594bac4a77 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -623,7 +623,7 @@ struct Scsi_Host {
 	/*
 	 * Optional work queue to be utilized by the transport
 	 */
-	char work_q_name[KOBJ_NAME_LEN];
+	char work_q_name[20];
 	struct workqueue_struct *work_q;
 
 	/*
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 06f72bab9df..878373c32ef 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -489,9 +489,9 @@ struct fc_host_attrs {
 	u16 npiv_vports_inuse;
 
 	/* work queues for rport state manipulation */
-	char work_q_name[KOBJ_NAME_LEN];
+	char work_q_name[20];
 	struct workqueue_struct *work_q;
-	char devloss_work_q_name[KOBJ_NAME_LEN];
+	char devloss_work_q_name[20];
 	struct workqueue_struct *devloss_work_q;
 };
 
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index f5444e033cc..8b6c91df4c7 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -198,7 +198,7 @@ struct iscsi_cls_host {
 	atomic_t nr_scans;
 	struct mutex mutex;
 	struct workqueue_struct *scan_workq;
-	char scan_workq_name[KOBJ_NAME_LEN];
+	char scan_workq_name[20];
 };
 
 extern void iscsi_host_for_each_session(struct Scsi_Host *shost,
-- 
cgit v1.2.3


From ca52a49846f1451163c0dc14c40cd06ff808df3e Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Fri, 2 May 2008 06:02:41 +0200
Subject: driver core: remove DEVICE_NAME_SIZE define

There is no such thing as a "device name size" in the driver core, so
remove the define and fix up any users of this odd define in the rest of
the kernel.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/eisa/Makefile        | 2 +-
 drivers/eisa/eisa-bus.c      | 4 ++--
 drivers/mca/mca-bus.c        | 2 +-
 drivers/video/aty/aty128fb.c | 2 +-
 drivers/video/aty/radeonfb.h | 2 +-
 include/linux/device.h       | 3 ---
 include/linux/eisa.h         | 2 +-
 7 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/eisa/Makefile b/drivers/eisa/Makefile
index 70abf93fe6b..5369ce957c6 100644
--- a/drivers/eisa/Makefile
+++ b/drivers/eisa/Makefile
@@ -9,7 +9,7 @@ obj-${CONFIG_EISA_VIRTUAL_ROOT} += virtual_root.o
 
 
 # Ugly hack to get DEVICE_NAME_SIZE value...
-DEVICE_NAME_SIZE =$(shell awk '$$1=="\#define" && $$2=="DEVICE_NAME_SIZE" {print $$3-1}' $(srctree)/include/linux/device.h)
+DEVICE_NAME_SIZE = 50
 
 $(obj)/eisa-bus.o: $(obj)/devlist.h
 
diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c
index 65dcf043265..c950bf8606d 100644
--- a/drivers/eisa/eisa-bus.c
+++ b/drivers/eisa/eisa-bus.c
@@ -22,7 +22,7 @@
 
 struct eisa_device_info {
 	struct eisa_device_id id;
-	char name[DEVICE_NAME_SIZE];
+	char name[50];
 };
 
 #ifdef CONFIG_EISA_NAMES
@@ -63,7 +63,7 @@ static void __init eisa_name_device (struct eisa_device *edev)
 		if (!strcmp (edev->id.sig, eisa_table[i].id.sig)) {
 			strlcpy (edev->pretty_name,
 				 eisa_table[i].name,
-				 DEVICE_NAME_SIZE);
+				 sizeof(edev->pretty_name));
 			return;
 		}
 	}
diff --git a/drivers/mca/mca-bus.c b/drivers/mca/mca-bus.c
index 67b8e9453b1..ef2dbfe7471 100644
--- a/drivers/mca/mca-bus.c
+++ b/drivers/mca/mca-bus.c
@@ -40,7 +40,7 @@ static struct mca_bus *mca_root_busses[MAX_MCA_BUSSES];
 
 struct mca_device_info {
 	short pos_id;		/* the 2 byte pos id for this card */
-	char name[DEVICE_NAME_SIZE];
+	char name[50];
 };
 
 static int mca_bus_match (struct device *dev, struct device_driver *drv)
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 24ee96c4e9e..07b6addbb3c 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1872,7 +1872,7 @@ static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_i
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct aty128fb_par *par = info->par;
 	struct fb_var_screeninfo var;
-	char video_card[DEVICE_NAME_SIZE];
+	char video_card[50];
 	u8 chip_rev;
 	u32 dac;
 
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
index c347e38cd0b..ccbfffd1280 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -289,7 +289,7 @@ struct radeonfb_info {
 	struct radeon_regs 	state;
 	struct radeon_regs	init_state;
 
-	char			name[DEVICE_NAME_SIZE];
+	char			name[50];
 
 	unsigned long		mmio_base_phys;
 	unsigned long		fb_base_phys;
diff --git a/include/linux/device.h b/include/linux/device.h
index fba1bb0d175..894fdb2e483 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -25,9 +25,6 @@
 #include <asm/atomic.h>
 #include <asm/device.h>
 
-#define DEVICE_NAME_SIZE	50
-/* DEVICE_NAME_HALF is really less than half to accommodate slop */
-#define DEVICE_NAME_HALF	__stringify(20)
 #define DEVICE_ID_SIZE		32
 #define BUS_ID_SIZE		20
 
diff --git a/include/linux/eisa.h b/include/linux/eisa.h
index fe806b6f030..e61c0be2a45 100644
--- a/include/linux/eisa.h
+++ b/include/linux/eisa.h
@@ -40,7 +40,7 @@ struct eisa_device {
 	u64                   dma_mask;
 	struct device         dev; /* generic device */
 #ifdef CONFIG_EISA_NAMES
-	char		      pretty_name[DEVICE_NAME_SIZE];
+	char		      pretty_name[50];
 #endif
 };
 
-- 
cgit v1.2.3


From b98cb4b7fe0e83238501b48489e46b3e0dce9aaf Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri, 2 May 2008 06:02:41 +0200
Subject: driver core: remove DEVICE_ID_SIZE define

There is no such thing as a "device id size" in the driver core, so
remove the define and fix up any users of this odd define in the rest of
the kernel.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/memstick/host/jmb38x_ms.c | 4 ++--
 include/linux/device.h            | 1 -
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index a054668eda1..4e3bfbcdf15 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -51,7 +51,7 @@ struct jmb38x_ms_host {
 	void __iomem            *addr;
 	spinlock_t              lock;
 	int                     id;
-	char                    host_id[DEVICE_ID_SIZE];
+	char                    host_id[32];
 	int                     irq;
 	unsigned int            block_pos;
 	unsigned long           timeout_jiffies;
@@ -781,7 +781,7 @@ static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt)
 
 	spin_lock_init(&host->lock);
 	host->id = cnt;
-	snprintf(host->host_id, DEVICE_ID_SIZE, DRIVER_NAME ":slot%d",
+	snprintf(host->host_id, sizeof(host->host_id), DRIVER_NAME ":slot%d",
 		 host->id);
 	host->irq = jm->pdev->irq;
 	host->timeout_jiffies = msecs_to_jiffies(1000);
diff --git a/include/linux/device.h b/include/linux/device.h
index 894fdb2e483..d24a47f80f9 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -25,7 +25,6 @@
 #include <asm/atomic.h>
 #include <asm/device.h>
 
-#define DEVICE_ID_SIZE		32
 #define BUS_ID_SIZE		20
 
 struct device;
-- 
cgit v1.2.3


From fc3a8828b139c24aade3f9d608775e36c248f8f5 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri, 2 May 2008 06:02:41 +0200
Subject: driver core: fix a lot of printk usages of bus_id

We have the dev_printk() variants for this kind of thing, use them
instead of directly trying to access the bus_id field of struct device.

This is done in order to remove bus_id entirely.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/arm/common/dmabounce.c       | 22 +++++++++-------------
 arch/arm/common/sa1111.c          |  3 ++-
 arch/arm/kernel/ecard.c           |  3 +--
 arch/arm/mach-integrator/impd1.c  |  3 +--
 arch/powerpc/platforms/chrp/pci.c |  2 +-
 arch/x86/kernel/pci-dma.c         |  6 ++----
 arch/x86/kernel/pci-gart_64.c     |  4 +---
 drivers/acpi/fan.c                | 10 +++++-----
 drivers/acpi/glue.c               |  6 ++----
 drivers/acpi/processor_core.c     |  5 ++---
 drivers/acpi/scan.c               |  2 +-
 drivers/acpi/thermal.c            |  4 ++--
 drivers/acpi/video.c              |  5 ++---
 drivers/base/power/trace.c        |  2 +-
 14 files changed, 32 insertions(+), 45 deletions(-)

diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2744673314b..dd294734260 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -554,9 +554,8 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
 	device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
 	if (!device_info) {
-		printk(KERN_ERR
-			"Could not allocated dmabounce_device_info for %s",
-			dev->bus_id);
+		dev_err(dev,
+			"Could not allocated dmabounce_device_info\n");
 		return -ENOMEM;
 	}
 
@@ -594,8 +593,7 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
 	dev->archdata.dmabounce = device_info;
 
-	printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
-		dev->bus_id, dev->bus->name);
+	dev_info(dev, "dmabounce: registered device\n");
 
 	return 0;
 
@@ -614,16 +612,15 @@ dmabounce_unregister_dev(struct device *dev)
 	dev->archdata.dmabounce = NULL;
 
 	if (!device_info) {
-		printk(KERN_WARNING
-			"%s: Never registered with dmabounce but attempting" \
-			"to unregister!\n", dev->bus_id);
+		dev_warn(dev,
+			 "Never registered with dmabounce but attempting"
+			 "to unregister!\n");
 		return;
 	}
 
 	if (!list_empty(&device_info->safe_buffers)) {
-		printk(KERN_ERR
-			"%s: Removing from dmabounce with pending buffers!\n",
-			dev->bus_id);
+		dev_err(dev,
+			"Removing from dmabounce with pending buffers!\n");
 		BUG();
 	}
 
@@ -639,8 +636,7 @@ dmabounce_unregister_dev(struct device *dev)
 
 	kfree(device_info);
 
-	printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
-		dev->bus_id, dev->bus->name);
+	dev_info(dev, "dmabounce: device unregistered\n");
 }
 
 
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index eb06d0b2cb7..2048ae0b155 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -593,7 +593,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		if (dev->dma_mask != 0xffffffffUL) {
 			ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
 			if (ret) {
-				printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id);
+				dev_err(&dev->dev, "SA1111: Failed to register"
+					" with dmabounce\n");
 				device_unregister(&dev->dev);
 			}
 		}
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 8bfd299bfe7..2de425f62c2 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -853,8 +853,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
 	for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
 		if (ec->resource[i].flags &&
 		    request_resource(&iomem_resource, &ec->resource[i])) {
-			printk(KERN_ERR "%s: resource(s) not available\n",
-				ec->dev.bus_id);
+			dev_err(&ec->dev, "resource(s) not available\n");
 			ec->resource[i].end -= ec->resource[i].start;
 			ec->resource[i].start = 0;
 			ec->resource[i].flags = 0;
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 62e653a3ea1..619d05e6cf7 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -407,8 +407,7 @@ static int impd1_probe(struct lm_device *dev)
 
 		ret = amba_device_register(d, &dev->resource);
 		if (ret) {
-			printk("unable to register device %s: %d\n",
-				d->dev.bus_id, ret);
+			dev_err(&d->dev, "unable to register device: %d\n");
 			kfree(d);
 		}
 	}
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 609c46db4a1..768c262b936 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -367,7 +367,7 @@ static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
 	viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
 	if (!viaisa)
 		return;
-	printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id);
+	dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
 
 	pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
 	pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index a4213c00dff..cbecb05551b 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -314,8 +314,7 @@ int dma_supported(struct device *dev, u64 mask)
 {
 #ifdef CONFIG_PCI
 	if (mask > 0xffffffff && forbid_dac > 0) {
-		printk(KERN_INFO "PCI: Disallowing DAC for device %s\n",
-				 dev->bus_id);
+		dev_info(dev, "PCI: Disallowing DAC for device\n");
 		return 0;
 	}
 #endif
@@ -342,8 +341,7 @@ int dma_supported(struct device *dev, u64 mask)
 	   type. Normally this doesn't make any difference, but gives
 	   more gentle handling of IOMMU overflow. */
 	if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
-		printk(KERN_INFO "%s: Force SAC with mask %Lx\n",
-				 dev->bus_id, mask);
+		dev_info(dev, "Force SAC with mask %Lx\n", mask);
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index be60961f869..df5f142657d 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -198,9 +198,7 @@ static void iommu_full(struct device *dev, size_t size, int dir)
 	 * out. Hopefully no network devices use single mappings that big.
 	 */
 
-	printk(KERN_ERR
-		"PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n",
-		size, dev->bus_id);
+	dev_err(dev, "PCI-DMA: Out of IOMMU space for %lu bytes\n", size);
 
 	if (size > PAGE_SIZE*EMERGENCY_PAGES) {
 		if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL)
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index 55c17afbe66..2655bc1b4ee 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -263,22 +263,22 @@ static int acpi_fan_add(struct acpi_device *device)
 		goto end;
 	}
 
-	printk(KERN_INFO PREFIX
-		"%s is registered as cooling_device%d\n",
-		device->dev.bus_id, cdev->id);
+	dev_info(&device->dev, "registered as cooling_device%d\n", cdev->id);
 
 	acpi_driver_data(device) = cdev;
 	result = sysfs_create_link(&device->dev.kobj,
 				   &cdev->device.kobj,
 				   "thermal_cooling");
 	if (result)
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		dev_err(&device->dev, "Failed to create sysfs link "
+			"'thermal_cooling'\n");
 
 	result = sysfs_create_link(&cdev->device.kobj,
 				   &device->dev.kobj,
 				   "device");
 	if (result)
-		printk(KERN_ERR PREFIX "Create sysfs link\n");
+		dev_err(&device->dev, "Failed to create sysfs link "
+			"'device'\n");
 
 	result = acpi_fan_add_fs(device);
 	if (result)
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 2f173e83f8a..084109507c9 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -146,8 +146,7 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle)
 	acpi_status status;
 
 	if (dev->archdata.acpi_handle) {
-		printk(KERN_WARNING PREFIX
-		       "Drivers changed 'acpi_handle' for %s\n", dev->bus_id);
+		dev_warn(dev, "Drivers changed 'acpi_handle'\n");
 		return -EINVAL;
 	}
 	get_device(dev);
@@ -195,8 +194,7 @@ static int acpi_unbind_one(struct device *dev)
 		/* acpi_bind_one increase refcnt by one */
 		put_device(dev);
 	} else {
-		printk(KERN_ERR PREFIX
-		       "Oops, 'acpi_handle' corrupt for %s\n", dev->bus_id);
+		dev_err(dev, "Oops, 'acpi_handle' corrupt\n");
 	}
 	return 0;
 }
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index ec0f2d581ec..e36422a7122 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -714,9 +714,8 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
 		goto end;
 	}
 
-	printk(KERN_INFO PREFIX
-		"%s is registered as cooling_device%d\n",
-		device->dev.bus_id, pr->cdev->id);
+	dev_info(&device->dev, "registered as cooling_device%d\n",
+		 pr->cdev->id);
 
 	result = sysfs_create_link(&device->dev.kobj,
 				   &pr->cdev->device.kobj,
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index f3132aa47a6..f6f52c1a2ab 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -471,7 +471,7 @@ static int acpi_device_register(struct acpi_device *device,
 	device->dev.release = &acpi_device_release;
 	result = device_add(&device->dev);
 	if(result) {
-		printk(KERN_ERR PREFIX "Error adding device %s", device->dev.bus_id);
+		dev_err(&device->dev, "Error adding device\n");
 		goto end;
 	}
 
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 84c795fb9b1..30a34133793 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -1179,8 +1179,8 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 
 	tz->tz_enabled = 1;
 
-	printk(KERN_INFO PREFIX "%s is registered as thermal_zone%d\n",
-			tz->device->dev.bus_id, tz->thermal_zone->id);
+	dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
+		 tz->thermal_zone->id);
 	return 0;
 }
 
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 64c889331f3..37b9e16710d 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -762,9 +762,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		if (IS_ERR(device->cdev))
 			return;
 
-		printk(KERN_INFO PREFIX
-			"%s is registered as cooling_device%d\n",
-			device->dev->dev.bus_id, device->cdev->id);
+		dev_info(&device->dev->dev, "registered as cooling_device%d\n",
+			 device->cdev->id);
 		result = sysfs_create_link(&device->dev->dev.kobj,
 				&device->cdev->device.kobj,
 				"thermal_cooling");
diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c
index 9b1b20b59e0..2aa6e8fc4de 100644
--- a/drivers/base/power/trace.c
+++ b/drivers/base/power/trace.c
@@ -194,7 +194,7 @@ static int show_dev_hash(unsigned int value)
 		struct device * dev = to_device(entry);
 		unsigned int hash = hash_string(DEVSEED, dev->bus_id, DEVHASH);
 		if (hash == value) {
-			printk("  hash matches device %s\n", dev->bus_id);
+			dev_info(dev, "hash matches\n");
 			match++;
 		}
 		entry = entry->prev;
-- 
cgit v1.2.3


From 22454cb99fc39f2629ad06a7eccb3df312f8830e Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Wed, 28 May 2008 23:06:47 +0200
Subject: pnp: add acpi:* modalias entries

Along with the non-modalias conformant "pnp:*" aliases, we add "acpi:*"
entries to PNP drivers, to allow module autoloading by ACPI PNP device
entries, which export proper modalias information, without any specific
userspace modprobe mangling.

Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 scripts/mod/file2alias.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 37d5c363fbc..1fcaf3284a6 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -340,11 +340,18 @@ static int do_acpi_entry(const char *filename,
 }
 
 /* looks like: "pnp:dD" */
-static int do_pnp_entry(const char *filename,
-			struct pnp_device_id *id, char *alias)
+static void do_pnp_device_entry(void *symval, unsigned long size,
+				struct module *mod)
 {
-	sprintf(alias, "pnp:d%s*", id->id);
-	return 1;
+	const unsigned long id_size = sizeof(struct pnp_device_id);
+	const struct pnp_device_id *id = symval;
+
+	device_id_check(mod->name, "pnp", size, id_size, symval);
+
+	buf_printf(&mod->dev_table_buf,
+		   "MODULE_ALIAS(\"pnp:d%s*\");\n", id->id);
+	buf_printf(&mod->dev_table_buf,
+		   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id->id);
 }
 
 /* looks like: "pnp:dD" for every device of the card */
@@ -388,9 +395,12 @@ static void do_pnp_card_entries(void *symval, unsigned long size,
 			}
 
 			/* add an individual alias for every device entry */
-			if (!dup)
+			if (!dup) {
 				buf_printf(&mod->dev_table_buf,
 					   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+				buf_printf(&mod->dev_table_buf,
+					   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+			}
 		}
 	}
 }
@@ -701,9 +711,7 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
 			 sizeof(struct acpi_device_id), "acpi",
 			 do_acpi_entry, mod);
 	else if (sym_is(symname, "__mod_pnp_device_table"))
-		do_table(symval, sym->st_size,
-			 sizeof(struct pnp_device_id), "pnp",
-			 do_pnp_entry, mod);
+		do_pnp_device_entry(symval, sym->st_size, mod);
 	else if (sym_is(symname, "__mod_pnp_card_device_table"))
 		do_pnp_card_entries(symval, sym->st_size, mod);
 	else if (sym_is(symname, "__mod_pcmcia_device_table"))
-- 
cgit v1.2.3


From 934da4766e5f72797118f7c014efaef567a812fc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <Uwe.Kleine-Koenig@digi.com>
Date: Sat, 31 May 2008 11:37:27 +0200
Subject: UIO: fix UIO Kconfig dependencies
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

ae210f188614bb3d1ee3f19c64e28e3cdd44877c introduced a big "if UIO"/"endif"
where all uio drivers are defined.  So know there is no need for them to
depend explicitly on UIO.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/uio/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index a4aaab9c7dd..78e139c935e 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -15,7 +15,7 @@ if UIO
 
 config UIO_CIF
 	tristate "generic Hilscher CIF Card driver"
-	depends on UIO && PCI
+	depends on PCI
 	default n
 	help
 	  Driver for Hilscher CIF DeviceNet and Profibus cards.  This
@@ -28,7 +28,6 @@ config UIO_CIF
 
 config UIO_SMX
 	tristate "SMX cryptengine UIO interface"
-	depends on UIO
 	default n
 	help
 	  Userspace IO interface to the Cryptography engine found on the
-- 
cgit v1.2.3


From 328a14e70e7f46997cb50d4258dd93d5377f98c6 Mon Sep 17 00:00:00 2001
From: "Hans J. Koch" <hjk@linutronix.de>
Date: Fri, 23 May 2008 13:50:14 +0200
Subject: UIO: Add write function to allow irq masking
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Sometimes it is necessary to enable/disable the interrupt of a UIO device
from the userspace part of the driver. With this patch, the UIO kernel driver
can implement an "irqcontrol()" function that does this. Userspace can write
an s32 value to /dev/uioX (usually 0 or 1 to turn the irq off or on). The
UIO core will then call the driver's irqcontrol function.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/DocBook/uio-howto.tmpl | 40 +++++++++++++++++++++++++++++++++++-
 drivers/uio/uio.c                    | 26 +++++++++++++++++++++++
 include/linux/uio_driver.h           |  2 ++
 3 files changed, 67 insertions(+), 1 deletion(-)

diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index fdd7f4f887b..c4d18731396 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -29,6 +29,12 @@
 </abstract>
 
 <revhistory>
+	<revision>
+	<revnumber>0.5</revnumber>
+	<date>2008-05-22</date>
+	<authorinitials>hjk</authorinitials>
+	<revremark>Added description of write() function.</revremark>
+	</revision>
 	<revision>
 	<revnumber>0.4</revnumber>
 	<date>2007-11-26</date>
@@ -64,7 +70,7 @@
 <?dbhtml filename="copyright.html"?>
 <title>Copyright and License</title>
 <para>
-      Copyright (c) 2006 by Hans-Jürgen Koch.</para>
+      Copyright (c) 2006-2008 by Hans-Jürgen Koch.</para>
 <para>
 This documentation is Free Software licensed under the terms of the
 GPL version 2.
@@ -189,6 +195,30 @@ interested in translating it, please email me
 	represents the total interrupt count. You can use this number
 	to figure out if you missed some interrupts.
 	</para>
+	<para>
+	For some hardware that has more than one interrupt source internally,
+	but not separate IRQ mask and status registers, there might be
+	situations where userspace cannot determine what the interrupt source
+	was if the kernel handler disables them by writing to the chip's IRQ
+	register. In such a case, the kernel has to disable the IRQ completely
+	to leave the chip's register untouched. Now the userspace part can
+	determine the cause of the interrupt, but it cannot re-enable
+	interrupts. Another cornercase is chips where re-enabling interrupts
+	is a read-modify-write operation to a combined IRQ status/acknowledge
+	register. This would be racy if a new interrupt occurred
+	simultaneously.
+	</para>
+	<para>
+	To address these problems, UIO also implements a write() function. It
+	is normally not used and can be ignored for hardware that has only a
+	single interrupt source or has separate IRQ mask and status registers.
+	If you need it, however, a write to <filename>/dev/uioX</filename>
+	will call the <function>irqcontrol()</function> function implemented
+	by the driver. You have to write a 32-bit value that is usually either
+	0 or 1 to disable or enable interrupts. If a driver does not implement
+	<function>irqcontrol()</function>, <function>write()</function> will
+	return with <varname>-ENOSYS</varname>.
+	</para>
 
 	<para>
 	To handle interrupts properly, your custom kernel module can
@@ -362,6 +392,14 @@ device is actually used.
 <function>open()</function>, you will probably also want a custom
 <function>release()</function> function.
 </para></listitem>
+
+<listitem><para>
+<varname>int (*irqcontrol)(struct uio_info *info, s32 irq_on)
+</varname>: Optional. If you need to be able to enable or disable
+interrupts from userspace by writing to <filename>/dev/uioX</filename>,
+you can implement this function. The parameter <varname>irq_on</varname>
+will be 0 to disable interrupts and 1 to enable them.
+</para></listitem>
 </itemizedlist>
 
 <para>
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 5a7ca2e6094..3a6934bf713 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -427,6 +427,31 @@ static ssize_t uio_read(struct file *filep, char __user *buf,
 	return retval;
 }
 
+static ssize_t uio_write(struct file *filep, const char __user *buf,
+			size_t count, loff_t *ppos)
+{
+	struct uio_listener *listener = filep->private_data;
+	struct uio_device *idev = listener->dev;
+	ssize_t retval;
+	s32 irq_on;
+
+	if (idev->info->irq == UIO_IRQ_NONE)
+		return -EIO;
+
+	if (count != sizeof(s32))
+		return -EINVAL;
+
+	if (!idev->info->irqcontrol)
+		return -ENOSYS;
+
+	if (copy_from_user(&irq_on, buf, count))
+		return -EFAULT;
+
+	retval = idev->info->irqcontrol(idev->info, irq_on);
+
+	return retval ? retval : sizeof(s32);
+}
+
 static int uio_find_mem_index(struct vm_area_struct *vma)
 {
 	int mi;
@@ -546,6 +571,7 @@ static const struct file_operations uio_fops = {
 	.open		= uio_open,
 	.release	= uio_release,
 	.read		= uio_read,
+	.write		= uio_write,
 	.mmap		= uio_mmap,
 	.poll		= uio_poll,
 	.fasync		= uio_fasync,
diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
index 973386d439d..cf65e964102 100644
--- a/include/linux/uio_driver.h
+++ b/include/linux/uio_driver.h
@@ -53,6 +53,7 @@ struct uio_device;
  * @mmap:		mmap operation for this uio device
  * @open:		open operation for this uio device
  * @release:		release operation for this uio device
+ * @irqcontrol:		disable/enable irqs when 0/1 is written to /dev/uioX
  */
 struct uio_info {
 	struct uio_device	*uio_dev;
@@ -66,6 +67,7 @@ struct uio_info {
 	int (*mmap)(struct uio_info *info, struct vm_area_struct *vma);
 	int (*open)(struct uio_info *info, struct inode *inode);
 	int (*release)(struct uio_info *info, struct inode *inode);
+	int (*irqcontrol)(struct uio_info *info, s32 irq_on);
 };
 
 extern int __must_check
-- 
cgit v1.2.3


From 4d80d59437247075029534adec8d69fce2cfb87a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <Uwe.Kleine-Koenig@digi.com>
Date: Sat, 31 May 2008 11:37:27 +0200
Subject: UIO: add generic UIO platform driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch adds a generic UIO platform driver. It eliminates the need for a
dedicated kernel module for simple platform devices. Users only need to
implement their irq handler in platform code and fill a struct uio_info
there. This helps avoiding code duplication as UIO platform drivers often
share a lot of common code.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/uio/Kconfig    |   7 +++
 drivers/uio/Makefile   |   1 +
 drivers/uio/uio_pdrv.c | 118 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 126 insertions(+)
 create mode 100644 drivers/uio/uio_pdrv.c

diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 78e139c935e..2e9079df26b 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -26,6 +26,13 @@ config UIO_CIF
 	  To compile this driver as a module, choose M here: the module
 	  will be called uio_cif.
 
+config UIO_PDRV
+	tristate "Userspace I/O platform driver"
+	help
+	  Generic platform driver for Userspace I/O devices.
+
+	  If you don't know what to do here, say N.
+
 config UIO_SMX
 	tristate "SMX cryptengine UIO interface"
 	default n
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index 18c45662431..e00ce0def1a 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_UIO)	+= uio.o
 obj-$(CONFIG_UIO_CIF)	+= uio_cif.o
+obj-$(CONFIG_UIO_PDRV)	+= uio_pdrv.o
 obj-$(CONFIG_UIO_SMX)	+= uio_smx.o
diff --git a/drivers/uio/uio_pdrv.c b/drivers/uio/uio_pdrv.c
new file mode 100644
index 00000000000..5d0d2e85d98
--- /dev/null
+++ b/drivers/uio/uio_pdrv.c
@@ -0,0 +1,118 @@
+/*
+ * drivers/uio/uio_pdrv.c
+ *
+ * Copyright (C) 2008 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/uio_driver.h>
+#include <linux/stringify.h>
+
+#define DRIVER_NAME "uio"
+
+struct uio_platdata {
+	struct uio_info *uioinfo;
+};
+
+static int uio_pdrv_probe(struct platform_device *pdev)
+{
+	struct uio_info *uioinfo = pdev->dev.platform_data;
+	struct uio_platdata *pdata;
+	struct uio_mem *uiomem;
+	int ret = -ENODEV;
+	int i;
+
+	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
+		dev_dbg(&pdev->dev, "%s: err_uioinfo\n", __func__);
+		goto err_uioinfo;
+	}
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		ret = -ENOMEM;
+		dev_dbg(&pdev->dev, "%s: err_alloc_pdata\n", __func__);
+		goto err_alloc_pdata;
+	}
+
+	pdata->uioinfo = uioinfo;
+
+	uiomem = &uioinfo->mem[0];
+
+	for (i = 0; i < pdev->num_resources; ++i) {
+		struct resource *r = &pdev->resource[i];
+
+		if (r->flags != IORESOURCE_MEM)
+			continue;
+
+		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+			dev_warn(&pdev->dev, "device has more than "
+					__stringify(MAX_UIO_MAPS)
+					" I/O memory resources.\n");
+			break;
+		}
+
+		uiomem->memtype = UIO_MEM_PHYS;
+		uiomem->addr = r->start;
+		uiomem->size = r->end - r->start + 1;
+		++uiomem;
+	}
+
+	while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
+		uiomem->size = 0;
+		++uiomem;
+	}
+
+	pdata->uioinfo->priv = pdata;
+
+	ret = uio_register_device(&pdev->dev, pdata->uioinfo);
+
+	if (ret) {
+		kfree(pdata);
+err_alloc_pdata:
+err_uioinfo:
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pdata);
+
+	return 0;
+}
+
+static int uio_pdrv_remove(struct platform_device *pdev)
+{
+	struct uio_platdata *pdata = platform_get_drvdata(pdev);
+
+	uio_unregister_device(pdata->uioinfo);
+
+	return 0;
+}
+
+static struct platform_driver uio_pdrv = {
+	.probe = uio_pdrv_probe,
+	.remove = uio_pdrv_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init uio_pdrv_init(void)
+{
+	return platform_driver_register(&uio_pdrv);
+}
+
+static void __exit uio_pdrv_exit(void)
+{
+	platform_driver_unregister(&uio_pdrv);
+}
+module_init(uio_pdrv_init);
+module_exit(uio_pdrv_exit);
+
+MODULE_AUTHOR("Uwe Kleine-Koenig");
+MODULE_DESCRIPTION("Userspace I/O platform driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
-- 
cgit v1.2.3


From 6d8333c24d41637f0f847f6e17032189dae08c02 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <Uwe.Kleine-Koenig@digi.com>
Date: Tue, 10 Jun 2008 09:14:48 +0200
Subject: UIO: minor style and comment fixes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
---
 include/linux/uio_driver.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
index cf65e964102..cdf338d94b7 100644
--- a/include/linux/uio_driver.h
+++ b/include/linux/uio_driver.h
@@ -36,7 +36,7 @@ struct uio_mem {
 	struct uio_map		*map;
 };
 
-#define MAX_UIO_MAPS 	5
+#define MAX_UIO_MAPS	5
 
 struct uio_device;
 
@@ -82,11 +82,11 @@ static inline int __must_check
 extern void uio_unregister_device(struct uio_info *info);
 extern void uio_event_notify(struct uio_info *info);
 
-/* defines for uio_device->irq */
+/* defines for uio_info->irq */
 #define UIO_IRQ_CUSTOM	-1
 #define UIO_IRQ_NONE	-2
 
-/* defines for uio_device->memtype */
+/* defines for uio_mem->memtype */
 #define UIO_MEM_NONE	0
 #define UIO_MEM_PHYS	1
 #define UIO_MEM_LOGICAL	2
-- 
cgit v1.2.3


From a231934bdf086a4fefc0df06e669499125a9db6f Mon Sep 17 00:00:00 2001
From: Richard Kennedy <richard@rsk.demon.co.uk>
Date: Mon, 2 Jun 2008 11:07:25 +0100
Subject: kobject: reorder kobject to save space on 64 bit builds

reorder kobject to save space on 64 bit builds.
shrinks from 72 to 64 bytes & moves allocated kobject to a smaller
slab.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 include/linux/kobject.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index d542faa6cb4..60f0d418ae3 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -58,12 +58,12 @@ enum kobject_action {
 
 struct kobject {
 	const char		*name;
-	struct kref		kref;
 	struct list_head	entry;
 	struct kobject		*parent;
 	struct kset		*kset;
 	struct kobj_type	*ktype;
 	struct sysfs_dirent	*sd;
+	struct kref		kref;
 	unsigned int state_initialized:1;
 	unsigned int state_in_sysfs:1;
 	unsigned int state_add_uevent_sent:1;
-- 
cgit v1.2.3


From 185000fc556372b7fb7f26516c325f212030dbd3 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 13 Jun 2008 11:09:16 +0800
Subject: kobject: should use kobject_put() in kset-example

We should call kobject_put() instead of kfree() if kobject_init_and_add()
returns an error, shouldn't we? Don't set up a bad example ;)

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 samples/kobject/kset-example.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/samples/kobject/kset-example.c b/samples/kobject/kset-example.c
index b0a1b4fe658..7395c0bbae1 100644
--- a/samples/kobject/kset-example.c
+++ b/samples/kobject/kset-example.c
@@ -211,7 +211,7 @@ static struct foo_obj *create_foo_obj(const char *name)
 	 */
 	retval = kobject_init_and_add(&foo->kobj, &foo_ktype, NULL, "%s", name);
 	if (retval) {
-		kfree(foo);
+		kobject_put(&foo->kobj);
 		return NULL;
 	}
 
-- 
cgit v1.2.3


From 838ea8e8dbfc8d907c7a55bbad507a44c1b81d57 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 12 Jun 2008 19:00:34 +0100
Subject: sysdev: fix debugging statements in registration code.

The systdev_class_register() and sysdev_register() functions have
pr_debug() statements which are enabled when the user selects the
driver core debug. Both of these routines do not produce the
correct output, as they make assumptions about data which has not
been initialised.

In sysdev_class_register() the code uses the kobject_name(&cls->kset.kobj)
at the start of the function, but this is not setup until later in the
same call. Change this to use cls->name which is passed in from the caller.

The sysdev_register() function tries to get the name of the sysdev by
kobject_name(&sysdev->kobj), but that isn't setup until later in the same
function so change this message to use the name of the sysdev's class and
add another message once the name is initialised.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/sys.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 358bb0be3c0..50690d9df24 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -130,8 +130,8 @@ static struct kset *system_kset;
 
 int sysdev_class_register(struct sysdev_class * cls)
 {
-	pr_debug("Registering sysdev class '%s'\n",
-		 kobject_name(&cls->kset.kobj));
+	pr_debug("Registering sysdev class '%s'\n", cls->name);
+
 	INIT_LIST_HEAD(&cls->drivers);
 	memset(&cls->kset.kobj, 0x00, sizeof(struct kobject));
 	cls->kset.kobj.parent = &system_kset->kobj;
@@ -241,7 +241,8 @@ int sysdev_register(struct sys_device * sysdev)
 	if (!cls)
 		return -EINVAL;
 
-	pr_debug("Registering sys device '%s'\n", kobject_name(&sysdev->kobj));
+	pr_debug("Registering sys device of class '%s'\n",
+		 kobject_name(&cls->kset.kobj));
 
 	/* initialize the kobject to 0, in case it had previously been used */
 	memset(&sysdev->kobj, 0x00, sizeof(struct kobject));
@@ -257,6 +258,9 @@ int sysdev_register(struct sys_device * sysdev)
 	if (!error) {
 		struct sysdev_driver * drv;
 
+		pr_debug("Registering sys device '%s'\n",
+			 kobject_name(&sysdev->kobj));
+
 		mutex_lock(&sysdev_drivers_lock);
 		/* Generic notification is implicit, because it's that
 		 * code that should have called us.
@@ -269,6 +273,7 @@ int sysdev_register(struct sys_device * sysdev)
 		}
 		mutex_unlock(&sysdev_drivers_lock);
 	}
+
 	kobject_uevent(&sysdev->kobj, KOBJ_ADD);
 	return error;
 }
-- 
cgit v1.2.3


From 93265d13ea5c3ec5f61a8009407fbe046ce6b7c0 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Mon, 16 Jun 2008 13:46:47 +0200
Subject: sysfs: don't call notify_change

sysfs_chmod_file() calls notify_change() to change the permission bits
on a sysfs file.  Replace with explicit call to sysfs_setattr() and
fsnotify_change().

This is equivalent, except that security_inode_setattr() is not
called.  This function is called by drivers, so the security checks do
not make any sense.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 fs/sysfs/file.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index e7735f643cd..3f07893ff89 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -14,6 +14,7 @@
 #include <linux/kobject.h>
 #include <linux/kallsyms.h>
 #include <linux/slab.h>
+#include <linux/fsnotify.h>
 #include <linux/namei.h>
 #include <linux/poll.h>
 #include <linux/list.h>
@@ -585,9 +586,11 @@ int sysfs_chmod_file(struct kobject *kobj, struct attribute *attr, mode_t mode)
 
 	newattrs.ia_mode = (mode & S_IALLUGO) | (inode->i_mode & ~S_IALLUGO);
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
-	rc = notify_change(victim, &newattrs);
+	newattrs.ia_ctime = current_fs_time(inode->i_sb);
+	rc = sysfs_setattr(victim, &newattrs);
 
 	if (rc == 0) {
+		fsnotify_change(victim, newattrs.ia_valid);
 		mutex_lock(&sysfs_mutex);
 		victim_sd->s_mode = newattrs.ia_mode;
 		mutex_unlock(&sysfs_mutex);
-- 
cgit v1.2.3


From 17149d9fff18c4811349140934dc541f70c617df Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Tue, 24 Jun 2008 14:24:57 -0700
Subject: uio-howto.tmpl: use standard copyright/legal markings

The Userspace I/O HOWTO document uses straight <sect1> tags and plain text
to describe copyright/legal information.  It should instead use the
<copyright> and <legalnotice> tags like all other documents in the kernel.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/DocBook/uio-howto.tmpl | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index c4d18731396..d799a2621e2 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -21,6 +21,18 @@
     </affiliation>
 </author>
 
+<copyright>
+	<year>2006-2008</year>
+	<holder>Hans-Jürgen Koch.</holder>
+</copyright>
+
+<legalnotice>
+<para>
+This documentation is Free Software licensed under the terms of the
+GPL version 2.
+</para>
+</legalnotice>
+
 <pubdate>2006-12-11</pubdate>
 
 <abstract>
@@ -66,17 +78,6 @@
 <?dbhtml filename="about.html"?>
 <title>About this document</title>
 
-<sect1 id="copyright">
-<?dbhtml filename="copyright.html"?>
-<title>Copyright and License</title>
-<para>
-      Copyright (c) 2006-2008 by Hans-Jürgen Koch.</para>
-<para>
-This documentation is Free Software licensed under the terms of the
-GPL version 2.
-</para>
-</sect1>
-
 <sect1 id="translations">
 <?dbhtml filename="translations.html"?>
 <title>Translations</title>
-- 
cgit v1.2.3


From 4f7e53096c93f0bdf2205134dfc541d0c3cc6e41 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Tue, 24 Jun 2008 14:25:00 -0700
Subject: uio-howto.tmpl: use unique output names

The Userspace I/O HOWTO template sets two different sections with the same
html output name (about.html).  This clearly won't work, so change the
first one to a unique "aboutthis.html" to prevent clobbering.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/DocBook/uio-howto.tmpl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index d799a2621e2..df87d1b9360 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -75,7 +75,7 @@ GPL version 2.
 </bookinfo>
 
 <chapter id="aboutthisdoc">
-<?dbhtml filename="about.html"?>
+<?dbhtml filename="aboutthis.html"?>
 <title>About this document</title>
 
 <sect1 id="translations">
-- 
cgit v1.2.3


From d9b19199e4894089456aaad295023263b5225c1a Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 10 Jun 2008 19:04:08 +0300
Subject: always enable FW_LOADER unless EMBEDDED=y

James Bottomley recently discovered that we have
{request,release}_firmware() dummies for the case of the actual
functions not being available and has a fix for the bug that was
actually causing build errors for built-in users with
CONFIG_FW_LOADER=m.

But now missing selects on FW_LOADER are no longer visible at
compile-time at all and can become runtime problems.

FW_LOADER is infrastructure with relatively small codesize we can safely
enable for everyone, and only for people who really need small kernels
(and can be expected to know what they are doing) it matters being able
to disable it.

This patch therefore always sets FW_LOADER=y and allows users only to
disable it with EMBEDDED=y.

As a bonus, we can then get rid of all "select FW_LOADER" plus the due
to it required "depends on HOTPLUG" which removes some complexity from
our Kconfig files.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index d47482fa1d2..6318f6b5736 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -27,8 +27,9 @@ config PREVENT_FIRMWARE_BUILD
 	  If unsure say Y here.
 
 config FW_LOADER
-	tristate "Userspace firmware loading support"
+	tristate "Userspace firmware loading support" if EMBEDDED
 	depends on HOTPLUG
+	default y
 	---help---
 	  This option is provided for the case where no in-kernel-tree modules
 	  require userspace firmware loading support, but a module built outside
-- 
cgit v1.2.3


From 43166141f73f969794bd7c850c89913631df99e4 Mon Sep 17 00:00:00 2001
From: Tsugikazu Shibata <tshibata@ab.jp.nec.com>
Date: Fri, 20 Jun 2008 10:59:52 +0900
Subject: HOWTO: change email addresses of James in HOWTO

Signed-off-by: Tsugikazu Shibata <tshibata@ab.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/HOWTO | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 619e8caf30d..c2371c5a98f 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -358,7 +358,7 @@ Here is a list of some of the different kernel trees available:
     - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
 	git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 
-    - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+    - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
 	git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 
     - x86, Ingo Molnar <mingo@elte.hu>
-- 
cgit v1.2.3


From 9505e6375640fc61d92d36c8e9f25a6a218f3f57 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Tue, 1 Jul 2008 15:14:51 +0200
Subject: debugfs: Implement debugfs_remove_recursive()

debugfs_remove_recursive() will remove a dentry and all its children.
Drivers can use this to zap their whole debugfs tree so that they don't
need to keep track of every single debugfs dentry they created.

It may fail to remove the whole tree in certain cases:

sh-3.2# rmmod atmel-mci < /sys/kernel/debug/mmc0/ios/clock
mmc0: card b368 removed
atmel_mci atmel_mci.0: Lost dma0chan1, falling back to PIO
sh-3.2# ls /sys/kernel/debug/mmc0/
ios

But I'm not sure if that case can be handled in any sane manner.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 fs/debugfs/inode.c      | 114 ++++++++++++++++++++++++++++++++++++++++--------
 include/linux/debugfs.h |   4 ++
 2 files changed, 100 insertions(+), 18 deletions(-)

diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index e9602d85c11..08e28c9bb41 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -309,6 +309,31 @@ struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
 }
 EXPORT_SYMBOL_GPL(debugfs_create_symlink);
 
+static void __debugfs_remove(struct dentry *dentry, struct dentry *parent)
+{
+	int ret = 0;
+
+	if (debugfs_positive(dentry)) {
+		if (dentry->d_inode) {
+			dget(dentry);
+			switch (dentry->d_inode->i_mode & S_IFMT) {
+			case S_IFDIR:
+				ret = simple_rmdir(parent->d_inode, dentry);
+				break;
+			case S_IFLNK:
+				kfree(dentry->d_inode->i_private);
+				/* fall through */
+			default:
+				simple_unlink(parent->d_inode, dentry);
+				break;
+			}
+			if (!ret)
+				d_delete(dentry);
+			dput(dentry);
+		}
+	}
+}
+
 /**
  * debugfs_remove - removes a file or directory from the debugfs filesystem
  * @dentry: a pointer to a the dentry of the file or directory to be
@@ -325,7 +350,6 @@ EXPORT_SYMBOL_GPL(debugfs_create_symlink);
 void debugfs_remove(struct dentry *dentry)
 {
 	struct dentry *parent;
-	int ret = 0;
 	
 	if (!dentry)
 		return;
@@ -335,29 +359,83 @@ void debugfs_remove(struct dentry *dentry)
 		return;
 
 	mutex_lock(&parent->d_inode->i_mutex);
-	if (debugfs_positive(dentry)) {
-		if (dentry->d_inode) {
-			dget(dentry);
-			switch (dentry->d_inode->i_mode & S_IFMT) {
-			case S_IFDIR:
-				ret = simple_rmdir(parent->d_inode, dentry);
-				break;
-			case S_IFLNK:
-				kfree(dentry->d_inode->i_private);
-				/* fall through */
-			default:
-				simple_unlink(parent->d_inode, dentry);
+	__debugfs_remove(dentry, parent);
+	mutex_unlock(&parent->d_inode->i_mutex);
+	simple_release_fs(&debugfs_mount, &debugfs_mount_count);
+}
+EXPORT_SYMBOL_GPL(debugfs_remove);
+
+/**
+ * debugfs_remove_recursive - recursively removes a directory
+ * @dentry: a pointer to a the dentry of the directory to be removed.
+ *
+ * This function recursively removes a directory tree in debugfs that
+ * was previously created with a call to another debugfs function
+ * (like debugfs_create_file() or variants thereof.)
+ *
+ * This function is required to be called in order for the file to be
+ * removed, no automatic cleanup of files will happen when a module is
+ * removed, you are responsible here.
+ */
+void debugfs_remove_recursive(struct dentry *dentry)
+{
+	struct dentry *child;
+	struct dentry *parent;
+
+	if (!dentry)
+		return;
+
+	parent = dentry->d_parent;
+	if (!parent || !parent->d_inode)
+		return;
+
+	parent = dentry;
+	mutex_lock(&parent->d_inode->i_mutex);
+
+	while (1) {
+		/*
+		 * When all dentries under "parent" has been removed,
+		 * walk up the tree until we reach our starting point.
+		 */
+		if (list_empty(&parent->d_subdirs)) {
+			mutex_unlock(&parent->d_inode->i_mutex);
+			if (parent == dentry)
 				break;
-			}
-			if (!ret)
-				d_delete(dentry);
-			dput(dentry);
+			parent = parent->d_parent;
+			mutex_lock(&parent->d_inode->i_mutex);
+		}
+		child = list_entry(parent->d_subdirs.next, struct dentry,
+				d_u.d_child);
+
+		/*
+		 * If "child" isn't empty, walk down the tree and
+		 * remove all its descendants first.
+		 */
+		if (!list_empty(&child->d_subdirs)) {
+			mutex_unlock(&parent->d_inode->i_mutex);
+			parent = child;
+			mutex_lock(&parent->d_inode->i_mutex);
+			continue;
 		}
+		__debugfs_remove(child, parent);
+		if (parent->d_subdirs.next == &child->d_u.d_child) {
+			/*
+			 * Avoid infinite loop if we fail to remove
+			 * one dentry.
+			 */
+			mutex_unlock(&parent->d_inode->i_mutex);
+			break;
+		}
+		simple_release_fs(&debugfs_mount, &debugfs_mount_count);
 	}
+
+	parent = dentry->d_parent;
+	mutex_lock(&parent->d_inode->i_mutex);
+	__debugfs_remove(dentry, parent);
 	mutex_unlock(&parent->d_inode->i_mutex);
 	simple_release_fs(&debugfs_mount, &debugfs_mount_count);
 }
-EXPORT_SYMBOL_GPL(debugfs_remove);
+EXPORT_SYMBOL_GPL(debugfs_remove_recursive);
 
 /**
  * debugfs_rename - rename a file/directory in the debugfs filesystem
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 32755cdf68d..e1a6c046cea 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -44,6 +44,7 @@ struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
 				      const char *dest);
 
 void debugfs_remove(struct dentry *dentry);
+void debugfs_remove_recursive(struct dentry *dentry);
 
 struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
                 struct dentry *new_dir, const char *new_name);
@@ -101,6 +102,9 @@ static inline struct dentry *debugfs_create_symlink(const char *name,
 static inline void debugfs_remove(struct dentry *dentry)
 { }
 
+static inline void debugfs_remove_recursive(struct dentry *dentry)
+{ }
+
 static inline struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
                 struct dentry *new_dir, char *new_name)
 {
-- 
cgit v1.2.3


From 83c79b55f0d929a0dcf2b0d347cd1875afc06f21 Mon Sep 17 00:00:00 2001
From: Nathan Lynch <ntl@pobox.com>
Date: Wed, 2 Jul 2008 10:21:30 -0700
Subject: sysfs-rules.txt: reword API stability statement

The first paragraph of this document implies that user space developers
shouldn't use sysfs at all, but then it goes on to describe rules that
developers should follow when accessing sysfs.  Not only is this somewhat
self-contradictory, it has been shown to discourage developers from using
established sysfs interfaces.

A note of caution is more appropriate than a blanket "sysfs will never
be stable" assertion.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/sysfs-rules.txt | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt
index 80ef562160b..6049a2a84dd 100644
--- a/Documentation/sysfs-rules.txt
+++ b/Documentation/sysfs-rules.txt
@@ -3,9 +3,8 @@ Rules on how to access information in the Linux kernel sysfs
 The kernel-exported sysfs exports internal kernel implementation details
 and depends on internal kernel structures and layout. It is agreed upon
 by the kernel developers that the Linux kernel does not provide a stable
-internal API. As sysfs is a direct export of kernel internal
-structures, the sysfs interface cannot provide a stable interface either;
-it may always change along with internal kernel changes.
+internal API. Therefore, there are aspects of the sysfs interface that
+may not be stable across kernel releases.
 
 To minimize the risk of breaking users of sysfs, which are in most cases
 low-level userspace applications, with a new kernel release, the users
-- 
cgit v1.2.3


From 0ad1d6f37cc3bb234c6e7ae30e40d1d40b9aa258 Mon Sep 17 00:00:00 2001
From: Wang Chen <wangchen@cn.fujitsu.com>
Date: Tue, 24 Jun 2008 16:59:02 +0800
Subject: kobject: Transmit return value of call_usermodehelper() to caller

kobject_uevent_env() drops the return value of call_usermodehelper().
It will make upper caller, such as dm_send_uevents(), to lose error
information.

BTW, Previously kobject_uevent_env() transmitted return of
call_usermodehelper() to callers, but
commit	5f123fbd80f4f788554636f02bf73e40f914e0d6
"[PATCH] merge kobject_uevent and kobject_hotplug" removed it.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Cc: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 lib/kobject_uevent.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 2fa545a6316..9f8d599459d 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -245,7 +245,8 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
 		if (retval)
 			goto exit;
 
-		call_usermodehelper(argv[0], argv, env->envp, UMH_WAIT_EXEC);
+		retval = call_usermodehelper(argv[0], argv,
+					     env->envp, UMH_WAIT_EXEC);
 	}
 
 exit:
-- 
cgit v1.2.3


From 36ce6dad6e3cb3f050ed41e0beac0070d2062b25 Mon Sep 17 00:00:00 2001
From: Cornelia Huck <cornelia.huck@de.ibm.com>
Date: Tue, 10 Jun 2008 11:09:08 +0200
Subject: driver core: Suppress sysfs warnings for device_rename().

driver core: Suppress sysfs warnings for device_rename().

Renaming network devices to an already existing name is not
something we want sysfs to print a scary warning for, since the
callers can deal with this correctly. So let's introduce
sysfs_create_link_nowarn() which gets rid of the common warning.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/core.c   |  9 +++++----
 fs/sysfs/dir.c        | 37 +++++++++++++++++++++++++++++++++++--
 fs/sysfs/symlink.c    | 41 +++++++++++++++++++++++++++++++++--------
 fs/sysfs/sysfs.h      |  1 +
 include/linux/sysfs.h | 10 ++++++++++
 5 files changed, 84 insertions(+), 14 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index c05b1159023..7d5c63c81a5 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1345,8 +1345,9 @@ int device_rename(struct device *dev, char *new_name)
 	if (old_class_name) {
 		new_class_name = make_class_name(dev->class->name, &dev->kobj);
 		if (new_class_name) {
-			error = sysfs_create_link(&dev->parent->kobj,
-						  &dev->kobj, new_class_name);
+			error = sysfs_create_link_nowarn(&dev->parent->kobj,
+							 &dev->kobj,
+							 new_class_name);
 			if (error)
 				goto out;
 			sysfs_remove_link(&dev->parent->kobj, old_class_name);
@@ -1354,8 +1355,8 @@ int device_rename(struct device *dev, char *new_name)
 	}
 #else
 	if (dev->class) {
-		error = sysfs_create_link(&dev->class->p->class_subsys.kobj,
-					  &dev->kobj, dev->bus_id);
+		error = sysfs_create_link_nowarn(&dev->class->p->class_subsys.kobj,
+						 &dev->kobj, dev->bus_id);
 		if (error)
 			goto out;
 		sysfs_remove_link(&dev->class->p->class_subsys.kobj,
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 8c0e4b92574..c1a7efb310b 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -398,7 +398,7 @@ void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
 }
 
 /**
- *	sysfs_add_one - add sysfs_dirent to parent
+ *	__sysfs_add_one - add sysfs_dirent to parent without warning
  *	@acxt: addrm context to use
  *	@sd: sysfs_dirent to be added
  *
@@ -417,7 +417,7 @@ void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
  *	0 on success, -EEXIST if entry with the given name already
  *	exists.
  */
-int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
+int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
 {
 	if (sysfs_find_dirent(acxt->parent_sd, sd->s_name))
 		return -EEXIST;
@@ -434,6 +434,39 @@ int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
 	return 0;
 }
 
+/**
+ *	sysfs_add_one - add sysfs_dirent to parent
+ *	@acxt: addrm context to use
+ *	@sd: sysfs_dirent to be added
+ *
+ *	Get @acxt->parent_sd and set sd->s_parent to it and increment
+ *	nlink of parent inode if @sd is a directory and link into the
+ *	children list of the parent.
+ *
+ *	This function should be called between calls to
+ *	sysfs_addrm_start() and sysfs_addrm_finish() and should be
+ *	passed the same @acxt as passed to sysfs_addrm_start().
+ *
+ *	LOCKING:
+ *	Determined by sysfs_addrm_start().
+ *
+ *	RETURNS:
+ *	0 on success, -EEXIST if entry with the given name already
+ *	exists.
+ */
+int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
+{
+	int ret;
+
+	ret = __sysfs_add_one(acxt, sd);
+	if (ret == -EEXIST) {
+		printk(KERN_WARNING "sysfs: duplicate filename '%s' "
+		       "can not be created\n", sd->s_name);
+		WARN_ON(1);
+	}
+	return ret;
+}
+
 /**
  *	sysfs_remove_one - remove sysfs_dirent from parent
  *	@acxt: addrm context to use
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index 817f5966edc..a3ba217fbe7 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -19,13 +19,8 @@
 
 #include "sysfs.h"
 
-/**
- *	sysfs_create_link - create symlink between two objects.
- *	@kobj:	object whose directory we're creating the link in.
- *	@target:	object we're pointing to.
- *	@name:		name of the symlink.
- */
-int sysfs_create_link(struct kobject * kobj, struct kobject * target, const char * name)
+static int sysfs_do_create_link(struct kobject *kobj, struct kobject *target,
+				const char *name, int warn)
 {
 	struct sysfs_dirent *parent_sd = NULL;
 	struct sysfs_dirent *target_sd = NULL;
@@ -65,7 +60,10 @@ int sysfs_create_link(struct kobject * kobj, struct kobject * target, const char
 	target_sd = NULL;	/* reference is now owned by the symlink */
 
 	sysfs_addrm_start(&acxt, parent_sd);
-	error = sysfs_add_one(&acxt, sd);
+	if (warn)
+		error = sysfs_add_one(&acxt, sd);
+	else
+		error = __sysfs_add_one(&acxt, sd);
 	sysfs_addrm_finish(&acxt);
 
 	if (error)
@@ -79,6 +77,33 @@ int sysfs_create_link(struct kobject * kobj, struct kobject * target, const char
 	return error;
 }
 
+/**
+ *	sysfs_create_link - create symlink between two objects.
+ *	@kobj:	object whose directory we're creating the link in.
+ *	@target:	object we're pointing to.
+ *	@name:		name of the symlink.
+ */
+int sysfs_create_link(struct kobject *kobj, struct kobject *target,
+		      const char *name)
+{
+	return sysfs_do_create_link(kobj, target, name, 1);
+}
+
+/**
+ *	sysfs_create_link_nowarn - create symlink between two objects.
+ *	@kobj:	object whose directory we're creating the link in.
+ *	@target:	object we're pointing to.
+ *	@name:		name of the symlink.
+ *
+ *	This function does the same as sysf_create_link(), but it
+ *	doesn't warn if the link already exists.
+ */
+int sysfs_create_link_nowarn(struct kobject *kobj, struct kobject *target,
+			     const char *name)
+{
+	return sysfs_do_create_link(kobj, target, name, 0);
+}
+
 /**
  *	sysfs_remove_link - remove symlink in object's directory.
  *	@kobj:	object we're acting for.
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index ce4e15f8aae..a5db496f71c 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -107,6 +107,7 @@ struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd);
 void sysfs_put_active_two(struct sysfs_dirent *sd);
 void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
 		       struct sysfs_dirent *parent_sd);
+int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd);
 int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd);
 void sysfs_remove_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd);
 void sysfs_addrm_finish(struct sysfs_addrm_cxt *acxt);
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 7858eac40aa..37fa24152bd 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -101,6 +101,9 @@ void sysfs_remove_bin_file(struct kobject *kobj, struct bin_attribute *attr);
 
 int __must_check sysfs_create_link(struct kobject *kobj, struct kobject *target,
 				   const char *name);
+int __must_check sysfs_create_link_nowarn(struct kobject *kobj,
+					  struct kobject *target,
+					  const char *name);
 void sysfs_remove_link(struct kobject *kobj, const char *name);
 
 int __must_check sysfs_create_group(struct kobject *kobj,
@@ -180,6 +183,13 @@ static inline int sysfs_create_link(struct kobject *kobj,
 	return 0;
 }
 
+static inline int sysfs_create_link_nowarn(struct kobject *kobj,
+					   struct kobject *target,
+					   const char *name)
+{
+	return 0;
+}
+
 static inline void sysfs_remove_link(struct kobject *kobj, const char *name)
 {
 }
-- 
cgit v1.2.3


From 4a0b2b4dbe1335b8b9886ba3dc85a145d5d938ed Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Tue, 1 Jul 2008 18:48:41 +0200
Subject: sysdev: Pass the attribute to the low level sysdev show/store
 function

This allow to dynamically generate attributes and share show/store
functions between attributes. Right now most attributes are generated
by special macros and lots of duplicated code. With the attribute
passed it's instead possible to attach some data to the attribute
and then use that in shared low level functions to do different things.

I need this for the dynamically generated bank attributes in the x86
machine check code, but it'll allow some further cleanups.

I converted all users in tree to the new show/store prototype. It's a single
huge patch to avoid unbisectable sections.

Runtime tested: x86-32, x86-64
Compiled only: ia64, powerpc
Not compile tested/only grep converted: sh, arm, avr32

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/arm/kernel/time.c                    |  4 ++-
 arch/avr32/kernel/cpu.c                   | 38 +++++++++++++++++---------
 arch/ia64/kernel/err_inject.c             | 22 ++++++++++-----
 arch/powerpc/kernel/sysfs.c               | 15 ++++++++---
 arch/powerpc/platforms/cell/cbe_thermal.c | 45 ++++++++++++++++++++-----------
 arch/powerpc/platforms/cell/spu_base.c    |  3 ++-
 arch/s390/kernel/smp.c                    | 36 ++++++++++++++++---------
 arch/s390/kernel/time.c                   | 35 ++++++++++++++++--------
 arch/sh/drivers/dma/dma-sysfs.c           | 15 ++++++++---
 arch/sparc64/kernel/sysfs.c               | 16 +++++++----
 arch/x86/kernel/cpu/mcheck/mce_64.c       | 14 +++++++---
 arch/x86/kernel/cpu/mcheck/therm_throt.c  |  1 +
 arch/x86/kernel/microcode.c               | 10 ++++---
 drivers/base/cpu.c                        | 10 ++++---
 drivers/base/memory.c                     | 12 ++++++---
 drivers/base/node.c                       | 15 +++++++----
 drivers/base/sys.c                        |  4 +--
 drivers/base/topology.c                   | 17 ++++++++----
 drivers/cpuidle/sysfs.c                   | 10 ++++---
 drivers/xen/balloon.c                     |  1 +
 include/linux/sysdev.h                    |  5 ++--
 kernel/rtmutex-tester.c                   |  7 ++---
 kernel/sched.c                            |  8 ++++--
 kernel/time/clocksource.c                 |  8 ++++--
 24 files changed, 239 insertions(+), 112 deletions(-)

diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index cc5145b28e7..368d171754c 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -130,7 +130,9 @@ static const struct leds_evt_name evt_names[] = {
 	{ "red",   led_red_on,   led_red_off   },
 };
 
-static ssize_t leds_store(struct sys_device *dev, const char *buf, size_t size)
+static ssize_t leds_store(struct sys_device *dev,
+			struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	int ret = -EINVAL, len = strcspn(buf, " ");
 
diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
index b8409caeb23..e84faffbbec 100644
--- a/arch/avr32/kernel/cpu.c
+++ b/arch/avr32/kernel/cpu.c
@@ -26,14 +26,16 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
  * XXX: If/when a SMP-capable implementation of AVR32 will ever be
  * made, we must make sure that the code executes on the correct CPU.
  */
-static ssize_t show_pc0event(struct sys_device *dev, char *buf)
+static ssize_t show_pc0event(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f);
 }
-static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc0event(struct sys_device *dev,
+			struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -46,15 +48,17 @@ static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc0count(struct sys_device *dev, char *buf)
+static ssize_t show_pc0count(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pcnt0;
 
 	pcnt0 = sysreg_read(PCNT0);
 	return sprintf(buf, "%lu\n", pcnt0);
 }
-static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
-			      size_t count)
+static ssize_t store_pc0count(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				const char *buf, size_t count)
 {
 	unsigned long val;
 	char *endp;
@@ -67,14 +71,16 @@ static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pc1event(struct sys_device *dev, char *buf)
+static ssize_t show_pc1event(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f);
 }
-static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1event(struct sys_device *dev,
+			      struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -87,14 +93,16 @@ static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc1count(struct sys_device *dev, char *buf)
+static ssize_t show_pc1count(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pcnt1;
 
 	pcnt1 = sysreg_read(PCNT1);
 	return sprintf(buf, "%lu\n", pcnt1);
 }
-static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1count(struct sys_device *dev,
+				struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -108,14 +116,16 @@ static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pccycles(struct sys_device *dev, char *buf)
+static ssize_t show_pccycles(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccnt;
 
 	pccnt = sysreg_read(PCCNT);
 	return sprintf(buf, "%lu\n", pccnt);
 }
-static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
+static ssize_t store_pccycles(struct sys_device *dev,
+				struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -129,14 +139,16 @@ static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pcenable(struct sys_device *dev, char *buf)
+static ssize_t show_pcenable(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "%c\n", (pccr & 1)?'1':'0');
 }
-static ssize_t store_pcenable(struct sys_device *dev, const char *buf,
+static ssize_t store_pcenable(struct sys_device *dev,
+			      struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long pccr, val;
diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index b642648cc2a..c539c689493 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -55,7 +55,8 @@ static u64 resources[NR_CPUS];
 
 #define show(name) 							\
 static ssize_t 								\
-show_##name(struct sys_device *dev, char *buf)				\
+show_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+		char *buf)						\
 {									\
 	u32 cpu=dev->id;						\
 	return sprintf(buf, "%lx\n", name[cpu]);			\
@@ -63,7 +64,8 @@ show_##name(struct sys_device *dev, char *buf)				\
 
 #define store(name)							\
 static ssize_t 								\
-store_##name(struct sys_device *dev, const char *buf, size_t size)	\
+store_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+					const char *buf, size_t size)	\
 {									\
 	unsigned int cpu=dev->id;					\
 	name[cpu] = simple_strtoull(buf, NULL, 16);			\
@@ -76,7 +78,8 @@ show(call_start)
  * processor. The cpu number in driver is only used for storing data.
  */
 static ssize_t
-store_call_start(struct sys_device *dev, const char *buf, size_t size)
+store_call_start(struct sys_device *dev, struct sysdev_attribute *attr,
+		const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	unsigned long call_start = simple_strtoull(buf, NULL, 16);
@@ -124,14 +127,16 @@ show(err_type_info)
 store(err_type_info)
 
 static ssize_t
-show_virtual_to_phys(struct sys_device *dev, char *buf)
+show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+			char *buf)
 {
 	unsigned int cpu=dev->id;
 	return sprintf(buf, "%lx\n", phys_addr[cpu]);
 }
 
 static ssize_t
-store_virtual_to_phys(struct sys_device *dev, const char *buf, size_t size)
+store_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	u64 virt_addr=simple_strtoull(buf, NULL, 16);
@@ -154,7 +159,8 @@ show(err_struct_info)
 store(err_struct_info)
 
 static ssize_t
-show_err_data_buffer(struct sys_device *dev, char *buf)
+show_err_data_buffer(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned int cpu=dev->id;
 
@@ -165,7 +171,9 @@ show_err_data_buffer(struct sys_device *dev, char *buf)
 }
 
 static ssize_t
-store_err_data_buffer(struct sys_device *dev, const char *buf, size_t size)
+store_err_data_buffer(struct sys_device *dev,
+			struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	int ret;
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index c8127f832df..aba0ba95f06 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -28,7 +28,9 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 /* Time in microseconds we delay before sleeping in the idle loop */
 DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
 
-static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
+static ssize_t store_smt_snooze_delay(struct sys_device *dev,
+				      struct sysdev_attribute *attr,
+				      const char *buf,
 				      size_t count)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
@@ -44,7 +46,9 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_smt_snooze_delay(struct sys_device *dev, char *buf)
+static ssize_t show_smt_snooze_delay(struct sys_device *dev,
+				     struct sysdev_attribute *attr,
+				     char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
@@ -152,14 +156,17 @@ static unsigned long write_##NAME(unsigned long val) \
 	mtspr(ADDRESS, val); \
 	return 0; \
 } \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+			struct sysdev_attribute *attr, \
+			char *buf) \
 { \
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
 	unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \
 	return sprintf(buf, "%lx\n", val); \
 } \
 static ssize_t __used \
-	store_##NAME(struct sys_device *dev, const char *buf, size_t count) \
+	store_##NAME(struct sys_device *dev, struct sysdev_attribute *attr, \
+			const char *buf, size_t count) \
 { \
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
 	unsigned long val; \
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 4852bf312d8..4d4c8c16912 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -97,7 +97,8 @@ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iom
 	return value.spe[spu->spe_id];
 }
 
-static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr,
+			char *buf)
 {
 	u8 value;
 	struct cbe_pmd_regs __iomem *pmd_regs;
@@ -146,32 +147,38 @@ static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char
 	return size;
 }
 
-static ssize_t spu_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 0);
 }
 
-static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 8);
 }
 
-static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 16);
 }
 
-static ssize_t spu_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
 }
 
-static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
 }
 
-static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
 }
@@ -192,43 +199,51 @@ static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
 
 /* shows the temperature of the DTS on the PPE,
  * located near the linear thermal sensor */
-static ssize_t ppe_show_temp0(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp0(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return ppe_show_temp(sysdev, buf, 32);
 }
 
 /* shows the temperature of the second DTS on the PPE */
-static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp1(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return ppe_show_temp(sysdev, buf, 0);
 }
 
-static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
 }
 
-static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
 }
 
-static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
 }
 
-static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
 }
 
-static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
 }
 
-static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
 }
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 78f905bc6a4..a5bdb89a17c 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -703,7 +703,8 @@ static unsigned long long spu_acct_time(struct spu *spu,
 }
 
 
-static ssize_t spu_stat_show(struct sys_device *sysdev, char *buf)
+static ssize_t spu_stat_show(struct sys_device *sysdev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct spu *spu = container_of(sysdev, struct spu, sysdev);
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index b6781030cfb..b795b3e24af 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -864,7 +864,8 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_configure_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t count;
 
@@ -874,8 +875,9 @@ static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
 	return count;
 }
 
-static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf,
-				   size_t count)
+static ssize_t cpu_configure_store(struct sys_device *dev,
+				  struct sysdev_attribute *attr,
+				  const char *buf, size_t count)
 {
 	int cpu = dev->id;
 	int val, rc;
@@ -922,7 +924,8 @@ out:
 static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_polarization_show(struct sys_device *dev,
+				     struct sysdev_attribute *attr, char *buf)
 {
 	int cpu = dev->id;
 	ssize_t count;
@@ -950,7 +953,8 @@ static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL);
 
-static ssize_t show_cpu_address(struct sys_device *dev, char *buf)
+static ssize_t show_cpu_address(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]);
 }
@@ -970,7 +974,8 @@ static struct attribute_group cpu_common_attr_group = {
 	.attrs = cpu_common_attrs,
 };
 
-static ssize_t show_capability(struct sys_device *dev, char *buf)
+static ssize_t show_capability(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned int capability;
 	int rc;
@@ -982,7 +987,8 @@ static ssize_t show_capability(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(capability, 0444, show_capability, NULL);
 
-static ssize_t show_idle_count(struct sys_device *dev, char *buf)
+static ssize_t show_idle_count(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long idle_count;
@@ -995,7 +1001,8 @@ static ssize_t show_idle_count(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL);
 
-static ssize_t show_idle_time(struct sys_device *dev, char *buf)
+static ssize_t show_idle_time(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long new_time;
@@ -1112,7 +1119,9 @@ out:
 	return rc;
 }
 
-static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
+static ssize_t __ref rescan_store(struct sys_device *dev,
+				  struct sysdev_attribute *attr,
+				  const char *buf,
 				  size_t count)
 {
 	int rc;
@@ -1123,7 +1132,9 @@ static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
 static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t dispatching_show(struct sys_device *dev, char *buf)
+static ssize_t dispatching_show(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				char *buf)
 {
 	ssize_t count;
 
@@ -1133,8 +1144,9 @@ static ssize_t dispatching_show(struct sys_device *dev, char *buf)
 	return count;
 }
 
-static ssize_t dispatching_store(struct sys_device *dev, const char *buf,
-				 size_t count)
+static ssize_t dispatching_store(struct sys_device *dev,
+				 struct sysdev_attribute *attr,
+				 const char *buf, size_t count)
 {
 	int val, rc;
 	char delim;
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index f2cede3947b..ab70d9bd926 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -1100,7 +1100,9 @@ static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev)
 		return etr_port1_online ? &etr_port1 : NULL;
 }
 
-static ssize_t etr_online_show(struct sys_device *dev, char *buf)
+static ssize_t etr_online_show(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				char *buf)
 {
 	unsigned int online;
 
@@ -1109,7 +1111,8 @@ static ssize_t etr_online_show(struct sys_device *dev, char *buf)
 }
 
 static ssize_t etr_online_store(struct sys_device *dev,
-			      const char *buf, size_t count)
+				struct sysdev_attribute *attr,
+				const char *buf, size_t count)
 {
 	unsigned int value;
 
@@ -1136,7 +1139,9 @@ static ssize_t etr_online_store(struct sys_device *dev,
 
 static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store);
 
-static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
+static ssize_t etr_stepping_control_show(struct sys_device *dev,
+					struct sysdev_attribute *attr,
+					char *buf)
 {
 	return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
 		       etr_eacr.e0 : etr_eacr.e1);
@@ -1144,7 +1149,8 @@ static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
 
-static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
+static ssize_t etr_mode_code_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	if (!etr_port0_online && !etr_port1_online)
 		/* Status word is not uptodate if both ports are offline. */
@@ -1155,7 +1161,8 @@ static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL);
 
-static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
+static ssize_t etr_untuned_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1166,7 +1173,8 @@ static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL);
 
-static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_network_id_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1177,7 +1185,8 @@ static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL);
 
-static ssize_t etr_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_id_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1188,7 +1197,8 @@ static ssize_t etr_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(id, 0400, etr_id_show, NULL);
 
-static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
+static ssize_t etr_port_number_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1199,7 +1209,8 @@ static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL);
 
-static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
+static ssize_t etr_coupled_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1210,7 +1221,8 @@ static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL);
 
-static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
+static ssize_t etr_local_time_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1221,7 +1233,8 @@ static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL);
 
-static ssize_t etr_utc_offset_show(struct sys_device *dev, char *buf)
+static ssize_t etr_utc_offset_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 51b57c0d1a3..347ee11351e 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -23,7 +23,8 @@ static struct sysdev_class dma_sysclass = {
 };
 EXPORT_SYMBOL(dma_sysclass);
 
-static ssize_t dma_show_devices(struct sys_device *dev, char *buf)
+static ssize_t dma_show_devices(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t len = 0;
 	int i;
@@ -57,13 +58,15 @@ static int __init dma_sysclass_init(void)
 }
 postcore_initcall(dma_sysclass_init);
 
-static ssize_t dma_show_dev_id(struct sys_device *dev, char *buf)
+static ssize_t dma_show_dev_id(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "%s\n", channel->dev_id);
 }
 
 static ssize_t dma_store_dev_id(struct sys_device *dev,
+				struct sysdev_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -74,6 +77,7 @@ static ssize_t dma_store_dev_id(struct sys_device *dev,
 static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
 
 static ssize_t dma_store_config(struct sys_device *dev,
+				struct sysdev_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -87,13 +91,15 @@ static ssize_t dma_store_config(struct sys_device *dev,
 
 static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config);
 
-static ssize_t dma_show_mode(struct sys_device *dev, char *buf)
+static ssize_t dma_show_mode(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "0x%08x\n", channel->mode);
 }
 
 static ssize_t dma_store_mode(struct sys_device *dev,
+			      struct sysdev_attribute *attr,
 			      const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -104,7 +110,8 @@ static ssize_t dma_store_mode(struct sys_device *dev,
 static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
 
 #define dma_ro_attr(field, fmt)						\
-static ssize_t dma_show_##field(struct sys_device *dev, char *buf)	\
+static ssize_t dma_show_##field(struct sys_device *dev, 		\
+				struct sysdev_attribute *attr, char *buf)\
 {									\
 	struct dma_channel *channel = to_dma_channel(dev);		\
 	return sprintf(buf, fmt, channel->field);			\
diff --git a/arch/sparc64/kernel/sysfs.c b/arch/sparc64/kernel/sysfs.c
index e885034a6b7..84e5ce14671 100644
--- a/arch/sparc64/kernel/sysfs.c
+++ b/arch/sparc64/kernel/sysfs.c
@@ -14,7 +14,8 @@
 static DEFINE_PER_CPU(struct hv_mmu_statistics, mmu_stats) __attribute__((aligned(64)));
 
 #define SHOW_MMUSTAT_ULONG(NAME) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+			struct sysdev_attribute *attr, char *buf) \
 { \
 	struct hv_mmu_statistics *p = &per_cpu(mmu_stats, dev->id); \
 	return sprintf(buf, "%lu\n", p->NAME); \
@@ -135,13 +136,16 @@ static unsigned long write_mmustat_enable(unsigned long val)
 	return sun4v_mmustat_conf(ra, &orig_ra);
 }
 
-static ssize_t show_mmustat_enable(struct sys_device *s, char *buf)
+static ssize_t show_mmustat_enable(struct sys_device *s,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long val = run_on_cpu(s->id, read_mmustat_enable, 0);
 	return sprintf(buf, "%lx\n", val);
 }
 
-static ssize_t store_mmustat_enable(struct sys_device *s, const char *buf, size_t count)
+static ssize_t store_mmustat_enable(struct sys_device *s,
+			struct sysdev_attribute *attr, const char *buf,
+			size_t count)
 {
 	unsigned long val, err;
 	int ret = sscanf(buf, "%ld", &val);
@@ -179,14 +183,16 @@ static void unregister_mmu_stats(struct sys_device *s)
 #endif
 
 #define SHOW_CPUDATA_ULONG_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+		struct sysdev_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%lu\n", c->MEMBER); \
 }
 
 #define SHOW_CPUDATA_UINT_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+		struct sysdev_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%u\n", c->MEMBER); \
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index c4a7ec31394..e6a4d5f6764 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -762,10 +762,14 @@ DEFINE_PER_CPU(struct sys_device, device_mce);
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
-	static ssize_t show_ ## name(struct sys_device *s, char *buf) {	\
+	static ssize_t show_ ## name(struct sys_device *s,		\
+				     struct sysdev_attribute *attr,	\
+				     char *buf) {			\
 		return sprintf(buf, "%lx\n", (unsigned long)var);	\
 	}								\
-	static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \
+	static ssize_t set_ ## name(struct sys_device *s,		\
+				    struct sysdev_attribute *attr,	\
+				    const char *buf, size_t siz) {	\
 		char *end;						\
 		unsigned long new = simple_strtoul(buf, &end, 0);	\
 		if (end == buf) return -EINVAL;				\
@@ -786,14 +790,16 @@ ACCESSOR(bank3ctl,bank[3],mce_restart())
 ACCESSOR(bank4ctl,bank[4],mce_restart())
 ACCESSOR(bank5ctl,bank[5],mce_restart())
 
-static ssize_t show_trigger(struct sys_device *s, char *buf)
+static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				char *buf)
 {
 	strcpy(buf, trigger);
 	strcat(buf, "\n");
 	return strlen(trigger) + 1;
 }
 
-static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
+static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				const char *buf,size_t siz)
 {
 	char *p;
 	int len;
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 1f4cc48c14c..d5ae2243f0b 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -35,6 +35,7 @@ atomic_t therm_throt_en = ATOMIC_INIT(0);
 
 #define define_therm_throt_sysdev_show_func(name)                            \
 static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,        \
+					struct sysdev_attribute *attr,	     \
                                               char *buf)                     \
 {                                                                            \
 	unsigned int cpu = dev->id;                                          \
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 56b933119a0..fc4790638b6 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -644,7 +644,9 @@ static void microcode_fini_cpu(int cpu)
 	mutex_unlock(&microcode_mutex);
 }
 
-static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
+static ssize_t reload_store(struct sys_device *dev,
+			    struct sysdev_attribute *attr,
+			    const char *buf, size_t sz)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 	char *end;
@@ -674,14 +676,16 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
 	return sz;
 }
 
-static ssize_t version_show(struct sys_device *dev, char *buf)
+static ssize_t version_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
 	return sprintf(buf, "0x%x\n", uci->rev);
 }
 
-static ssize_t pf_show(struct sys_device *dev, char *buf)
+static ssize_t pf_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index e38dfed41d8..20537d50790 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -21,15 +21,16 @@ EXPORT_SYMBOL(cpu_sysdev_class);
 static DEFINE_PER_CPU(struct sys_device *, cpu_sys_devices);
 
 #ifdef CONFIG_HOTPLUG_CPU
-static ssize_t show_online(struct sys_device *dev, char *buf)
+static ssize_t show_online(struct sys_device *dev, struct sysdev_attribute *attr,
+			   char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
 	return sprintf(buf, "%u\n", !!cpu_online(cpu->sysdev.id));
 }
 
-static ssize_t __ref store_online(struct sys_device *dev, const char *buf,
-			    size_t count)
+static ssize_t __ref store_online(struct sys_device *dev, struct sysdev_attribute *attr,
+				 const char *buf, size_t count)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 	ssize_t ret;
@@ -80,7 +81,8 @@ static inline void register_cpu_control(struct cpu *cpu)
 #ifdef CONFIG_KEXEC
 #include <linux/kexec.h>
 
-static ssize_t show_crash_notes(struct sys_device *dev, char *buf)
+static ssize_t show_crash_notes(struct sys_device *dev, struct sysdev_attribute *attr,
+				char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 	ssize_t rc;
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 937e8258981..4d4e0e7b6e9 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -92,7 +92,8 @@ unregister_memory(struct memory_block *memory, struct mem_section *section)
  * uses.
  */
 
-static ssize_t show_mem_phys_index(struct sys_device *dev, char *buf)
+static ssize_t show_mem_phys_index(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct memory_block *mem =
 		container_of(dev, struct memory_block, sysdev);
@@ -102,7 +103,8 @@ static ssize_t show_mem_phys_index(struct sys_device *dev, char *buf)
 /*
  * online, offline, going offline, etc.
  */
-static ssize_t show_mem_state(struct sys_device *dev, char *buf)
+static ssize_t show_mem_state(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct memory_block *mem =
 		container_of(dev, struct memory_block, sysdev);
@@ -217,7 +219,8 @@ out:
 }
 
 static ssize_t
-store_mem_state(struct sys_device *dev, const char *buf, size_t count)
+store_mem_state(struct sys_device *dev,
+		struct sysdev_attribute *attr, const char *buf, size_t count)
 {
 	struct memory_block *mem;
 	unsigned int phys_section_nr;
@@ -248,7 +251,8 @@ out:
  * s.t. if I offline all of these sections I can then
  * remove the physical device?
  */
-static ssize_t show_phys_device(struct sys_device *dev, char *buf)
+static ssize_t show_phys_device(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct memory_block *mem =
 		container_of(dev, struct memory_block, sysdev);
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 0f867a08333..5116b78c632 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -36,11 +36,13 @@ static ssize_t node_read_cpumap(struct sys_device *dev, int type, char *buf)
 	return len;
 }
 
-static inline ssize_t node_read_cpumask(struct sys_device *dev, char *buf)
+static inline ssize_t node_read_cpumask(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	return node_read_cpumap(dev, 0, buf);
 }
-static inline ssize_t node_read_cpulist(struct sys_device *dev, char *buf)
+static inline ssize_t node_read_cpulist(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	return node_read_cpumap(dev, 1, buf);
 }
@@ -49,7 +51,8 @@ static SYSDEV_ATTR(cpumap,  S_IRUGO, node_read_cpumask, NULL);
 static SYSDEV_ATTR(cpulist, S_IRUGO, node_read_cpulist, NULL);
 
 #define K(x) ((x) << (PAGE_SHIFT - 10))
-static ssize_t node_read_meminfo(struct sys_device * dev, char * buf)
+static ssize_t node_read_meminfo(struct sys_device * dev,
+			struct sysdev_attribute *attr, char * buf)
 {
 	int n;
 	int nid = dev->id;
@@ -112,7 +115,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev, char * buf)
 #undef K
 static SYSDEV_ATTR(meminfo, S_IRUGO, node_read_meminfo, NULL);
 
-static ssize_t node_read_numastat(struct sys_device * dev, char * buf)
+static ssize_t node_read_numastat(struct sys_device * dev,
+				struct sysdev_attribute *attr, char * buf)
 {
 	return sprintf(buf,
 		       "numa_hit %lu\n"
@@ -130,7 +134,8 @@ static ssize_t node_read_numastat(struct sys_device * dev, char * buf)
 }
 static SYSDEV_ATTR(numastat, S_IRUGO, node_read_numastat, NULL);
 
-static ssize_t node_read_distance(struct sys_device * dev, char * buf)
+static ssize_t node_read_distance(struct sys_device * dev,
+			struct sysdev_attribute *attr, char * buf)
 {
 	int nid = dev->id;
 	int len = 0;
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 50690d9df24..dc7dace14e1 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -36,7 +36,7 @@ sysdev_show(struct kobject * kobj, struct attribute * attr, char * buffer)
 	struct sysdev_attribute * sysdev_attr = to_sysdev_attr(attr);
 
 	if (sysdev_attr->show)
-		return sysdev_attr->show(sysdev, buffer);
+		return sysdev_attr->show(sysdev, sysdev_attr, buffer);
 	return -EIO;
 }
 
@@ -49,7 +49,7 @@ sysdev_store(struct kobject * kobj, struct attribute * attr,
 	struct sysdev_attribute * sysdev_attr = to_sysdev_attr(attr);
 
 	if (sysdev_attr->store)
-		return sysdev_attr->store(sysdev, buffer, count);
+		return sysdev_attr->store(sysdev, sysdev_attr, buffer, count);
 	return -EIO;
 }
 
diff --git a/drivers/base/topology.c b/drivers/base/topology.c
index 3f6d9b0a6ab..199cd97e32e 100644
--- a/drivers/base/topology.c
+++ b/drivers/base/topology.c
@@ -34,7 +34,8 @@
 static SYSDEV_ATTR(_name, 0444, show_##_name, NULL)
 
 #define define_id_show_func(name)				\
-static ssize_t show_##name(struct sys_device *dev, char *buf)	\
+static ssize_t show_##name(struct sys_device *dev,		\
+		struct sysdev_attribute *attr, char *buf)	\
 {								\
 	unsigned int cpu = dev->id;				\
 	return sprintf(buf, "%d\n", topology_##name(cpu));	\
@@ -59,14 +60,17 @@ static ssize_t show_cpumap(int type, cpumask_t *mask, char *buf)
 
 #ifdef arch_provides_topology_pointers
 #define define_siblings_show_map(name)					\
-static ssize_t show_##name(struct sys_device *dev, char *buf)	\
+static ssize_t show_##name(struct sys_device *dev,			\
+			   struct sysdev_attribute *attr, char *buf)	\
 {									\
 	unsigned int cpu = dev->id;					\
 	return show_cpumap(0, &(topology_##name(cpu)), buf);		\
 }
 
 #define define_siblings_show_list(name)					\
-static ssize_t show_##name##_list(struct sys_device *dev, char *buf) \
+static ssize_t show_##name##_list(struct sys_device *dev,		\
+				  struct sysdev_attribute *attr,	\
+				  char *buf)				\
 {									\
 	unsigned int cpu = dev->id;					\
 	return show_cpumap(1, &(topology_##name(cpu)), buf);		\
@@ -74,7 +78,8 @@ static ssize_t show_##name##_list(struct sys_device *dev, char *buf) \
 
 #else
 #define define_siblings_show_map(name)					\
-static ssize_t show_##name(struct sys_device *dev, char *buf)	\
+static ssize_t show_##name(struct sys_device *dev,			\
+			   struct sysdev_attribute *attr, char *buf)	\
 {									\
 	unsigned int cpu = dev->id;					\
 	cpumask_t mask = topology_##name(cpu);				\
@@ -82,7 +87,9 @@ static ssize_t show_##name(struct sys_device *dev, char *buf)	\
 }
 
 #define define_siblings_show_list(name)					\
-static ssize_t show_##name##_list(struct sys_device *dev, char *buf) \
+static ssize_t show_##name##_list(struct sys_device *dev,		\
+				  struct sysdev_attribute *attr,	\
+				  char *buf)				\
 {									\
 	unsigned int cpu = dev->id;					\
 	cpumask_t mask = topology_##name(cpu);				\
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index e949618b9be..31a0e0b455b 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -21,7 +21,8 @@ static int __init cpuidle_sysfs_setup(char *unused)
 }
 __setup("cpuidle_sysfs_switch", cpuidle_sysfs_setup);
 
-static ssize_t show_available_governors(struct sys_device *dev, char *buf)
+static ssize_t show_available_governors(struct sys_device *dev,
+		struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t i = 0;
 	struct cpuidle_governor *tmp;
@@ -39,7 +40,8 @@ out:
 	return i;
 }
 
-static ssize_t show_current_driver(struct sys_device *dev, char *buf)
+static ssize_t show_current_driver(struct sys_device *dev,
+		struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t ret;
 
@@ -53,7 +55,8 @@ static ssize_t show_current_driver(struct sys_device *dev, char *buf)
 	return ret;
 }
 
-static ssize_t show_current_governor(struct sys_device *dev, char *buf)
+static ssize_t show_current_governor(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t ret;
 
@@ -68,6 +71,7 @@ static ssize_t show_current_governor(struct sys_device *dev, char *buf)
 }
 
 static ssize_t store_current_governor(struct sys_device *dev,
+	struct sysdev_attribute *attr,
 	const char *buf, size_t count)
 {
 	char gov_name[CPUIDLE_NAME_LEN];
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 591bc29b55f..d4427cb8697 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -610,6 +610,7 @@ static ssize_t show_target_kb(struct sys_device *dev, char *buf)
 }
 
 static ssize_t store_target_kb(struct sys_device *dev,
+			       struct sysdev_attribute *attr,
 			       const char *buf,
 			       size_t count)
 {
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index f2767bc6b73..8dcf3162b21 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -99,8 +99,9 @@ extern void sysdev_unregister(struct sys_device *);
 
 struct sysdev_attribute { 
 	struct attribute	attr;
-	ssize_t (*show)(struct sys_device *, char *);
-	ssize_t (*store)(struct sys_device *, const char *, size_t);
+	ssize_t (*show)(struct sys_device *, struct sysdev_attribute *, char *);
+	ssize_t (*store)(struct sys_device *, struct sysdev_attribute *,
+			 const char *, size_t);
 };
 
 
diff --git a/kernel/rtmutex-tester.c b/kernel/rtmutex-tester.c
index 092e4c620af..a56f629b057 100644
--- a/kernel/rtmutex-tester.c
+++ b/kernel/rtmutex-tester.c
@@ -297,8 +297,8 @@ static int test_func(void *data)
  *
  * opcode:data
  */
-static ssize_t sysfs_test_command(struct sys_device *dev, const char *buf,
-				  size_t count)
+static ssize_t sysfs_test_command(struct sys_device *dev, struct sysdev_attribute *attr,
+				  const char *buf, size_t count)
 {
 	struct sched_param schedpar;
 	struct test_thread_data *td;
@@ -360,7 +360,8 @@ static ssize_t sysfs_test_command(struct sys_device *dev, const char *buf,
  * @dev:	thread to query
  * @buf:	char buffer to be filled with thread status info
  */
-static ssize_t sysfs_test_status(struct sys_device *dev, char *buf)
+static ssize_t sysfs_test_status(struct sys_device *dev, struct sysdev_attribute *attr,
+				 char *buf)
 {
 	struct test_thread_data *td;
 	struct task_struct *tsk;
diff --git a/kernel/sched.c b/kernel/sched.c
index 99e6d850eca..b1104ea5d25 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7737,11 +7737,13 @@ static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
 }
 
 #ifdef CONFIG_SCHED_MC
-static ssize_t sched_mc_power_savings_show(struct sys_device *dev, char *page)
+static ssize_t sched_mc_power_savings_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *page)
 {
 	return sprintf(page, "%u\n", sched_mc_power_savings);
 }
 static ssize_t sched_mc_power_savings_store(struct sys_device *dev,
+					    struct sysdev_attribute *attr,
 					    const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 0);
@@ -7751,11 +7753,13 @@ static SYSDEV_ATTR(sched_mc_power_savings, 0644, sched_mc_power_savings_show,
 #endif
 
 #ifdef CONFIG_SCHED_SMT
-static ssize_t sched_smt_power_savings_show(struct sys_device *dev, char *page)
+static ssize_t sched_smt_power_savings_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *page)
 {
 	return sprintf(page, "%u\n", sched_smt_power_savings);
 }
 static ssize_t sched_smt_power_savings_store(struct sys_device *dev,
+					     struct sysdev_attribute *attr,
 					     const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 1);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index dadde5361f3..b1c2da81b05 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -376,7 +376,8 @@ void clocksource_unregister(struct clocksource *cs)
  * Provides sysfs interface for listing current clocksource.
  */
 static ssize_t
-sysfs_show_current_clocksources(struct sys_device *dev, char *buf)
+sysfs_show_current_clocksources(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t count = 0;
 
@@ -397,6 +398,7 @@ sysfs_show_current_clocksources(struct sys_device *dev, char *buf)
  * clocksource selction.
  */
 static ssize_t sysfs_override_clocksource(struct sys_device *dev,
+					  struct sysdev_attribute *attr,
 					  const char *buf, size_t count)
 {
 	struct clocksource *ovr = NULL;
@@ -449,7 +451,9 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
  * Provides sysfs interface for listing registered clocksources
  */
 static ssize_t
-sysfs_show_available_clocksources(struct sys_device *dev, char *buf)
+sysfs_show_available_clocksources(struct sys_device *dev,
+				  struct sysdev_attribute *attr,
+				  char *buf)
 {
 	struct clocksource *src;
 	ssize_t count = 0;
-- 
cgit v1.2.3


From 9800794ac11d4646384b3a310dfd1fe2eed577bf Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Tue, 1 Jul 2008 18:48:42 +0200
Subject: sysdev: Add utility functions for simple int/ulong variable sysdev
 attributes

This adds a new sysdev_ext_attribute that stores a pointer to the variable
it manages and some utility functions/macro to easily use them.

Previously all users wrote custom macros to generate show/store
functions for each variable, with this it is possible to avoid
that in many cases.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/sys.c     | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/sysdev.h | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 83 insertions(+)

diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index dc7dace14e1..40fc14f0354 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -479,3 +479,52 @@ int __init system_bus_init(void)
 
 EXPORT_SYMBOL_GPL(sysdev_register);
 EXPORT_SYMBOL_GPL(sysdev_unregister);
+
+#define to_ext_attr(x) container_of(x, struct sysdev_ext_attribute, attr)
+
+ssize_t sysdev_store_ulong(struct sys_device *sysdev,
+			   struct sysdev_attribute *attr,
+			   const char *buf, size_t size)
+{
+	struct sysdev_ext_attribute *ea = to_ext_attr(attr);
+	char *end;
+	unsigned long new = simple_strtoul(buf, &end, 0);
+	if (end == buf)
+		return -EINVAL;
+	*(unsigned long *)(ea->var) = new;
+	return end - buf;
+}
+EXPORT_SYMBOL_GPL(sysdev_store_ulong);
+
+ssize_t sysdev_show_ulong(struct sys_device *sysdev,
+			  struct sysdev_attribute *attr,
+			  char *buf)
+{
+	struct sysdev_ext_attribute *ea = to_ext_attr(attr);
+	return snprintf(buf, PAGE_SIZE, "%lx\n", *(unsigned long *)(ea->var));
+}
+EXPORT_SYMBOL_GPL(sysdev_show_ulong);
+
+ssize_t sysdev_store_int(struct sys_device *sysdev,
+			   struct sysdev_attribute *attr,
+			   const char *buf, size_t size)
+{
+	struct sysdev_ext_attribute *ea = to_ext_attr(attr);
+	char *end;
+	long new = simple_strtol(buf, &end, 0);
+	if (end == buf || new > INT_MAX || new < INT_MIN)
+		return -EINVAL;
+	*(int *)(ea->var) = new;
+	return end - buf;
+}
+EXPORT_SYMBOL_GPL(sysdev_store_int);
+
+ssize_t sysdev_show_int(struct sys_device *sysdev,
+			  struct sysdev_attribute *attr,
+			  char *buf)
+{
+	struct sysdev_ext_attribute *ea = to_ext_attr(attr);
+	return snprintf(buf, PAGE_SIZE, "%d\n", *(int *)(ea->var));
+}
+EXPORT_SYMBOL_GPL(sysdev_show_int);
+
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index 8dcf3162b21..f395bb3fa2f 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -119,4 +119,38 @@ struct sysdev_attribute {
 extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *);
 extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *);
 
+struct sysdev_ext_attribute {
+	struct sysdev_attribute attr;
+	void *var;
+};
+
+/*
+ * Support for simple variable sysdev attributes.
+ * The pointer to the variable is stored in a sysdev_ext_attribute
+ */
+
+/* Add more types as needed */
+
+extern ssize_t sysdev_show_ulong(struct sys_device *, struct sysdev_attribute *,
+				char *);
+extern ssize_t sysdev_store_ulong(struct sys_device *,
+			struct sysdev_attribute *, const char *, size_t);
+extern ssize_t sysdev_show_int(struct sys_device *, struct sysdev_attribute *,
+				char *);
+extern ssize_t sysdev_store_int(struct sys_device *,
+			struct sysdev_attribute *, const char *, size_t);
+
+#define _SYSDEV_ULONG_ATTR(_name, _mode, _var)				\
+	{ _SYSDEV_ATTR(_name, _mode, sysdev_show_ulong, sysdev_store_ulong), \
+	  &(_var) }
+#define SYSDEV_ULONG_ATTR(_name, _mode, _var)			\
+	struct sysdev_ext_attribute attr_##_name = 		\
+		_SYSDEV_ULONG_ATTR(_name, _mode, _var);
+#define _SYSDEV_INT_ATTR(_name, _mode, _var)				\
+	{ _SYSDEV_ATTR(_name, _mode, sysdev_show_int, sysdev_store_int), \
+	  &(_var) }
+#define SYSDEV_INT_ATTR(_name, _mode, _var)			\
+	struct sysdev_ext_attribute attr_##_name = 		\
+		_SYSDEV_INT_ATTR(_name, _mode, _var);
+
 #endif /* _SYSDEV_H_ */
-- 
cgit v1.2.3


From d95d62c018209355c0dc998682ff792432aa870c Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Tue, 1 Jul 2008 18:48:43 +0200
Subject: sysdev: Convert the x86 mce tolerant sysdev attribute to generic
 attribute

Use the new generic int attribute accessors for the x86 mce tolerant
attribute. Simple example to illustrate the new macros.

There are much more places all over the tree that could be converted
like this.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/x86/kernel/cpu/mcheck/mce_64.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index e6a4d5f6764..9ab65be8242 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -812,12 +812,12 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
 }
 
 static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-ACCESSOR(tolerant,tolerant,)
+static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
 ACCESSOR(check_interval,check_interval,mce_restart())
 static struct sysdev_attribute *mce_attributes[] = {
 	&attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl,
 	&attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl,
-	&attr_tolerant, &attr_check_interval, &attr_trigger,
+	&attr_tolerant.attr, &attr_check_interval, &attr_trigger,
 	NULL
 };
 
-- 
cgit v1.2.3


From 89bcb05d9bbf8bd559988bca4f2579defd28d008 Mon Sep 17 00:00:00 2001
From: David Altobelli <david.altobelli@hp.com>
Date: Wed, 2 Jul 2008 09:38:53 -0600
Subject: HP iLO driver

A driver for the HP iLO/iLO2 management processor, which allows userspace
programs to query the management processor.  Programs can open a channel
to the device (/dev/hpilo/dXccbN), and use this to send/receive queries.
The O_EXCL open flag is used to indicate that a particular channel cannot
be shared between processes.  This driver will replace various packages
HP has shipped, including hprsm and hp-ilo.

Signed-off-by: David Altobelli <david.altobelli@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/misc/Kconfig  |  13 +
 drivers/misc/Makefile |   1 +
 drivers/misc/hpilo.c  | 768 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/misc/hpilo.h  | 189 +++++++++++++
 4 files changed, 971 insertions(+)
 create mode 100644 drivers/misc/hpilo.c
 create mode 100644 drivers/misc/hpilo.h

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 1921b8dbb24..ce67d973d34 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -420,4 +420,17 @@ config SGI_XP
 	  this feature will allow for direct communication between SSIs
 	  based on a network adapter and DMA messaging.
 
+config HP_ILO
+	tristate "Channel interface driver for HP iLO/iLO2 processor"
+	default n
+	help
+	  The channel interface driver allows applications to communicate
+	  with iLO/iLO2 management processors present on HP ProLiant
+	  servers.  Upon loading, the driver creates /dev/hpilo/dXccbN files,
+	  which can be used to gather data from the management processor,
+	  via read and write system calls.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hpilo.
+
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index a6dac6a2e7e..688fe76135e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
+obj-$(CONFIG_HP_ILO)		+= hpilo.o
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
new file mode 100644
index 00000000000..05e29828923
--- /dev/null
+++ b/drivers/misc/hpilo.c
@@ -0,0 +1,768 @@
+/*
+ * Driver for HP iLO/iLO2 management processor.
+ *
+ * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
+ *	David Altobelli <david.altobelli@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/file.h>
+#include <linux/cdev.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include "hpilo.h"
+
+static struct class *ilo_class;
+static unsigned int ilo_major;
+static char ilo_hwdev[MAX_ILO_DEV];
+
+static inline int get_entry_id(int entry)
+{
+	return (entry & ENTRY_MASK_DESCRIPTOR) >> ENTRY_BITPOS_DESCRIPTOR;
+}
+
+static inline int get_entry_len(int entry)
+{
+	return ((entry & ENTRY_MASK_QWORDS) >> ENTRY_BITPOS_QWORDS) << 3;
+}
+
+static inline int mk_entry(int id, int len)
+{
+	int qlen = len & 7 ? (len >> 3) + 1 : len >> 3;
+	return id << ENTRY_BITPOS_DESCRIPTOR | qlen << ENTRY_BITPOS_QWORDS;
+}
+
+static inline int desc_mem_sz(int nr_entry)
+{
+	return nr_entry << L2_QENTRY_SZ;
+}
+
+/*
+ * FIFO queues, shared with hardware.
+ *
+ * If a queue has empty slots, an entry is added to the queue tail,
+ * and that entry is marked as occupied.
+ * Entries can be dequeued from the head of the list, when the device
+ * has marked the entry as consumed.
+ *
+ * Returns true on successful queue/dequeue, false on failure.
+ */
+static int fifo_enqueue(struct ilo_hwinfo *hw, char *fifobar, int entry)
+{
+	struct fifo *fifo_q = FIFOBARTOHANDLE(fifobar);
+	int ret = 0;
+
+	spin_lock(&hw->fifo_lock);
+	if (!(fifo_q->fifobar[(fifo_q->tail + 1) & fifo_q->imask]
+	      & ENTRY_MASK_O)) {
+		fifo_q->fifobar[fifo_q->tail & fifo_q->imask] |=
+				(entry & ENTRY_MASK_NOSTATE) | fifo_q->merge;
+		fifo_q->tail += 1;
+		ret = 1;
+	}
+	spin_unlock(&hw->fifo_lock);
+
+	return ret;
+}
+
+static int fifo_dequeue(struct ilo_hwinfo *hw, char *fifobar, int *entry)
+{
+	struct fifo *fifo_q = FIFOBARTOHANDLE(fifobar);
+	int ret = 0;
+	u64 c;
+
+	spin_lock(&hw->fifo_lock);
+	c = fifo_q->fifobar[fifo_q->head & fifo_q->imask];
+	if (c & ENTRY_MASK_C) {
+		if (entry)
+			*entry = c & ENTRY_MASK_NOSTATE;
+
+		fifo_q->fifobar[fifo_q->head & fifo_q->imask] =
+							(c | ENTRY_MASK) + 1;
+		fifo_q->head += 1;
+		ret = 1;
+	}
+	spin_unlock(&hw->fifo_lock);
+
+	return ret;
+}
+
+static int ilo_pkt_enqueue(struct ilo_hwinfo *hw, struct ccb *ccb,
+			   int dir, int id, int len)
+{
+	char *fifobar;
+	int entry;
+
+	if (dir == SENDQ)
+		fifobar = ccb->ccb_u1.send_fifobar;
+	else
+		fifobar = ccb->ccb_u3.recv_fifobar;
+
+	entry = mk_entry(id, len);
+	return fifo_enqueue(hw, fifobar, entry);
+}
+
+static int ilo_pkt_dequeue(struct ilo_hwinfo *hw, struct ccb *ccb,
+			   int dir, int *id, int *len, void **pkt)
+{
+	char *fifobar, *desc;
+	int entry = 0, pkt_id = 0;
+	int ret;
+
+	if (dir == SENDQ) {
+		fifobar = ccb->ccb_u1.send_fifobar;
+		desc = ccb->ccb_u2.send_desc;
+	} else {
+		fifobar = ccb->ccb_u3.recv_fifobar;
+		desc = ccb->ccb_u4.recv_desc;
+	}
+
+	ret = fifo_dequeue(hw, fifobar, &entry);
+	if (ret) {
+		pkt_id = get_entry_id(entry);
+		if (id)
+			*id = pkt_id;
+		if (len)
+			*len = get_entry_len(entry);
+		if (pkt)
+			*pkt = (void *)(desc + desc_mem_sz(pkt_id));
+	}
+
+	return ret;
+}
+
+static inline void doorbell_set(struct ccb *ccb)
+{
+	iowrite8(1, ccb->ccb_u5.db_base);
+}
+
+static inline void doorbell_clr(struct ccb *ccb)
+{
+	iowrite8(2, ccb->ccb_u5.db_base);
+}
+static inline int ctrl_set(int l2sz, int idxmask, int desclim)
+{
+	int active = 0, go = 1;
+	return l2sz << CTRL_BITPOS_L2SZ |
+	       idxmask << CTRL_BITPOS_FIFOINDEXMASK |
+	       desclim << CTRL_BITPOS_DESCLIMIT |
+	       active << CTRL_BITPOS_A |
+	       go << CTRL_BITPOS_G;
+}
+static void ctrl_setup(struct ccb *ccb, int nr_desc, int l2desc_sz)
+{
+	/* for simplicity, use the same parameters for send and recv ctrls */
+	ccb->send_ctrl = ctrl_set(l2desc_sz, nr_desc-1, nr_desc-1);
+	ccb->recv_ctrl = ctrl_set(l2desc_sz, nr_desc-1, nr_desc-1);
+}
+
+static inline int fifo_sz(int nr_entry)
+{
+	/* size of a fifo is determined by the number of entries it contains */
+	return (nr_entry * sizeof(u64)) + FIFOHANDLESIZE;
+}
+
+static void fifo_setup(void *base_addr, int nr_entry)
+{
+	struct fifo *fifo_q = base_addr;
+	int i;
+
+	/* set up an empty fifo */
+	fifo_q->head = 0;
+	fifo_q->tail = 0;
+	fifo_q->reset = 0;
+	fifo_q->nrents = nr_entry;
+	fifo_q->imask = nr_entry - 1;
+	fifo_q->merge = ENTRY_MASK_O;
+
+	for (i = 0; i < nr_entry; i++)
+		fifo_q->fifobar[i] = 0;
+}
+
+static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
+{
+	struct ccb *driver_ccb;
+	struct ccb __iomem *device_ccb;
+	int retries;
+
+	driver_ccb = &data->driver_ccb;
+	device_ccb = data->mapped_ccb;
+
+	/* complicated dance to tell the hw we are stopping */
+	doorbell_clr(driver_ccb);
+	iowrite32(ioread32(&device_ccb->send_ctrl) & ~(1 << CTRL_BITPOS_G),
+		  &device_ccb->send_ctrl);
+	iowrite32(ioread32(&device_ccb->recv_ctrl) & ~(1 << CTRL_BITPOS_G),
+		  &device_ccb->recv_ctrl);
+
+	/* give iLO some time to process stop request */
+	for (retries = 1000; retries > 0; retries--) {
+		doorbell_set(driver_ccb);
+		udelay(1);
+		if (!(ioread32(&device_ccb->send_ctrl) & (1 << CTRL_BITPOS_A))
+		    &&
+		    !(ioread32(&device_ccb->recv_ctrl) & (1 << CTRL_BITPOS_A)))
+			break;
+	}
+	if (retries == 0)
+		dev_err(&pdev->dev, "Closing, but controller still active\n");
+
+	/* clear the hw ccb */
+	memset_io(device_ccb, 0, sizeof(struct ccb));
+
+	/* free resources used to back send/recv queues */
+	pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+}
+
+static int ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
+{
+	char *dma_va, *dma_pa;
+	int pkt_id, pkt_sz, i, error;
+	struct ccb *driver_ccb, *ilo_ccb;
+	struct pci_dev *pdev;
+
+	driver_ccb = &data->driver_ccb;
+	ilo_ccb = &data->ilo_ccb;
+	pdev = hw->ilo_dev;
+
+	data->dma_size = 2 * fifo_sz(NR_QENTRY) +
+			 2 * desc_mem_sz(NR_QENTRY) +
+			 ILO_START_ALIGN + ILO_CACHE_SZ;
+
+	error = -ENOMEM;
+	data->dma_va = pci_alloc_consistent(pdev, data->dma_size,
+					    &data->dma_pa);
+	if (!data->dma_va)
+		goto out;
+
+	dma_va = (char *)data->dma_va;
+	dma_pa = (char *)data->dma_pa;
+
+	memset(dma_va, 0, data->dma_size);
+
+	dma_va = (char *)roundup((unsigned long)dma_va, ILO_START_ALIGN);
+	dma_pa = (char *)roundup((unsigned long)dma_pa, ILO_START_ALIGN);
+
+	/*
+	 * Create two ccb's, one with virt addrs, one with phys addrs.
+	 * Copy the phys addr ccb to device shared mem.
+	 */
+	ctrl_setup(driver_ccb, NR_QENTRY, L2_QENTRY_SZ);
+	ctrl_setup(ilo_ccb, NR_QENTRY, L2_QENTRY_SZ);
+
+	fifo_setup(dma_va, NR_QENTRY);
+	driver_ccb->ccb_u1.send_fifobar = dma_va + FIFOHANDLESIZE;
+	ilo_ccb->ccb_u1.send_fifobar = dma_pa + FIFOHANDLESIZE;
+	dma_va += fifo_sz(NR_QENTRY);
+	dma_pa += fifo_sz(NR_QENTRY);
+
+	dma_va = (char *)roundup((unsigned long)dma_va, ILO_CACHE_SZ);
+	dma_pa = (char *)roundup((unsigned long)dma_pa, ILO_CACHE_SZ);
+
+	fifo_setup(dma_va, NR_QENTRY);
+	driver_ccb->ccb_u3.recv_fifobar = dma_va + FIFOHANDLESIZE;
+	ilo_ccb->ccb_u3.recv_fifobar = dma_pa + FIFOHANDLESIZE;
+	dma_va += fifo_sz(NR_QENTRY);
+	dma_pa += fifo_sz(NR_QENTRY);
+
+	driver_ccb->ccb_u2.send_desc = dma_va;
+	ilo_ccb->ccb_u2.send_desc = dma_pa;
+	dma_pa += desc_mem_sz(NR_QENTRY);
+	dma_va += desc_mem_sz(NR_QENTRY);
+
+	driver_ccb->ccb_u4.recv_desc = dma_va;
+	ilo_ccb->ccb_u4.recv_desc = dma_pa;
+
+	driver_ccb->channel = slot;
+	ilo_ccb->channel = slot;
+
+	driver_ccb->ccb_u5.db_base = hw->db_vaddr + (slot << L2_DB_SIZE);
+	ilo_ccb->ccb_u5.db_base = NULL; /* hw ccb's doorbell is not used */
+
+	/* copy the ccb with physical addrs to device memory */
+	data->mapped_ccb = (struct ccb __iomem *)
+				(hw->ram_vaddr + (slot * ILOHW_CCB_SZ));
+	memcpy_toio(data->mapped_ccb, ilo_ccb, sizeof(struct ccb));
+
+	/* put packets on the send and receive queues */
+	pkt_sz = 0;
+	for (pkt_id = 0; pkt_id < NR_QENTRY; pkt_id++) {
+		ilo_pkt_enqueue(hw, driver_ccb, SENDQ, pkt_id, pkt_sz);
+		doorbell_set(driver_ccb);
+	}
+
+	pkt_sz = desc_mem_sz(1);
+	for (pkt_id = 0; pkt_id < NR_QENTRY; pkt_id++)
+		ilo_pkt_enqueue(hw, driver_ccb, RECVQ, pkt_id, pkt_sz);
+
+	doorbell_clr(driver_ccb);
+
+	/* make sure iLO is really handling requests */
+	for (i = 1000; i > 0; i--) {
+		if (ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, NULL, NULL))
+			break;
+		udelay(1);
+	}
+
+	if (i) {
+		ilo_pkt_enqueue(hw, driver_ccb, SENDQ, pkt_id, 0);
+		doorbell_set(driver_ccb);
+	} else {
+		dev_err(&pdev->dev, "Open could not dequeue a packet\n");
+		error = -EBUSY;
+		goto free;
+	}
+
+	return 0;
+free:
+	pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+out:
+	return error;
+}
+
+static inline int is_channel_reset(struct ccb *ccb)
+{
+	/* check for this particular channel needing a reset */
+	return FIFOBARTOHANDLE(ccb->ccb_u1.send_fifobar)->reset;
+}
+
+static inline void set_channel_reset(struct ccb *ccb)
+{
+	/* set a flag indicating this channel needs a reset */
+	FIFOBARTOHANDLE(ccb->ccb_u1.send_fifobar)->reset = 1;
+}
+
+static inline int is_device_reset(struct ilo_hwinfo *hw)
+{
+	/* check for global reset condition */
+	return ioread32(&hw->mmio_vaddr[DB_OUT]) & (1 << DB_RESET);
+}
+
+static inline void clear_device(struct ilo_hwinfo *hw)
+{
+	/* clear the device (reset bits, pending channel entries) */
+	iowrite32(-1, &hw->mmio_vaddr[DB_OUT]);
+}
+
+static void ilo_locked_reset(struct ilo_hwinfo *hw)
+{
+	int slot;
+
+	/*
+	 * Mapped memory is zeroed on ilo reset, so set a per ccb flag
+	 * to indicate that this ccb needs to be closed and reopened.
+	 */
+	for (slot = 0; slot < MAX_CCB; slot++) {
+		if (!hw->ccb_alloc[slot])
+			continue;
+		set_channel_reset(&hw->ccb_alloc[slot]->driver_ccb);
+	}
+
+	clear_device(hw);
+}
+
+static void ilo_reset(struct ilo_hwinfo *hw)
+{
+	spin_lock(&hw->alloc_lock);
+
+	/* reset might have been handled after lock was taken */
+	if (is_device_reset(hw))
+		ilo_locked_reset(hw);
+
+	spin_unlock(&hw->alloc_lock);
+}
+
+static ssize_t ilo_read(struct file *fp, char __user *buf,
+			size_t len, loff_t *off)
+{
+	int err, found, cnt, pkt_id, pkt_len;
+	struct ccb_data *data;
+	struct ccb *driver_ccb;
+	struct ilo_hwinfo *hw;
+	void *pkt;
+
+	data = fp->private_data;
+	driver_ccb = &data->driver_ccb;
+	hw = data->ilo_hw;
+
+	if (is_device_reset(hw) || is_channel_reset(driver_ccb)) {
+		/*
+		 * If the device has been reset, applications
+		 * need to close and reopen all ccbs.
+		 */
+		ilo_reset(hw);
+		return -ENODEV;
+	}
+
+	/*
+	 * This function is to be called when data is expected
+	 * in the channel, and will return an error if no packet is found
+	 * during the loop below.  The sleep/retry logic is to allow
+	 * applications to call read() immediately post write(),
+	 * and give iLO some time to process the sent packet.
+	 */
+	cnt = 20;
+	do {
+		/* look for a received packet */
+		found = ilo_pkt_dequeue(hw, driver_ccb, RECVQ, &pkt_id,
+					&pkt_len, &pkt);
+		if (found)
+			break;
+		cnt--;
+		msleep(100);
+	} while (!found && cnt);
+
+	if (!found)
+		return -EAGAIN;
+
+	/* only copy the length of the received packet */
+	if (pkt_len < len)
+		len = pkt_len;
+
+	err = copy_to_user(buf, pkt, len);
+
+	/* return the received packet to the queue */
+	ilo_pkt_enqueue(hw, driver_ccb, RECVQ, pkt_id, desc_mem_sz(1));
+
+	return err ? -EFAULT : len;
+}
+
+static ssize_t ilo_write(struct file *fp, const char __user *buf,
+			 size_t len, loff_t *off)
+{
+	int err, pkt_id, pkt_len;
+	struct ccb_data *data;
+	struct ccb *driver_ccb;
+	struct ilo_hwinfo *hw;
+	void *pkt;
+
+	data = fp->private_data;
+	driver_ccb = &data->driver_ccb;
+	hw = data->ilo_hw;
+
+	if (is_device_reset(hw) || is_channel_reset(driver_ccb)) {
+		/*
+		 * If the device has been reset, applications
+		 * need to close and reopen all ccbs.
+		 */
+		ilo_reset(hw);
+		return -ENODEV;
+	}
+
+	/* get a packet to send the user command */
+	if (!ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, &pkt_len, &pkt))
+		return -EBUSY;
+
+	/* limit the length to the length of the packet */
+	if (pkt_len < len)
+		len = pkt_len;
+
+	/* on failure, set the len to 0 to return empty packet to the device */
+	err = copy_from_user(pkt, buf, len);
+	if (err)
+		len = 0;
+
+	/* send the packet */
+	ilo_pkt_enqueue(hw, driver_ccb, SENDQ, pkt_id, len);
+	doorbell_set(driver_ccb);
+
+	return err ? -EFAULT : len;
+}
+
+static int ilo_close(struct inode *ip, struct file *fp)
+{
+	int slot;
+	struct ccb_data *data;
+	struct ilo_hwinfo *hw;
+
+	slot = iminor(ip) % MAX_CCB;
+	hw = container_of(ip->i_cdev, struct ilo_hwinfo, cdev);
+
+	spin_lock(&hw->alloc_lock);
+
+	if (is_device_reset(hw))
+		ilo_locked_reset(hw);
+
+	if (hw->ccb_alloc[slot]->ccb_cnt == 1) {
+
+		data = fp->private_data;
+
+		ilo_ccb_close(hw->ilo_dev, data);
+
+		kfree(data);
+		hw->ccb_alloc[slot] = NULL;
+	} else
+		hw->ccb_alloc[slot]->ccb_cnt--;
+
+	spin_unlock(&hw->alloc_lock);
+
+	return 0;
+}
+
+static int ilo_open(struct inode *ip, struct file *fp)
+{
+	int slot, error;
+	struct ccb_data *data;
+	struct ilo_hwinfo *hw;
+
+	slot = iminor(ip) % MAX_CCB;
+	hw = container_of(ip->i_cdev, struct ilo_hwinfo, cdev);
+
+	/* new ccb allocation */
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock(&hw->alloc_lock);
+
+	if (is_device_reset(hw))
+		ilo_locked_reset(hw);
+
+	/* each fd private_data holds sw/hw view of ccb */
+	if (hw->ccb_alloc[slot] == NULL) {
+		/* create a channel control block for this minor */
+		error = ilo_ccb_open(hw, data, slot);
+		if (!error) {
+			hw->ccb_alloc[slot] = data;
+			hw->ccb_alloc[slot]->ccb_cnt = 1;
+			hw->ccb_alloc[slot]->ccb_excl = fp->f_flags & O_EXCL;
+			hw->ccb_alloc[slot]->ilo_hw = hw;
+		} else
+			kfree(data);
+	} else {
+		kfree(data);
+		if (fp->f_flags & O_EXCL || hw->ccb_alloc[slot]->ccb_excl) {
+			/*
+			 * The channel exists, and either this open
+			 * or a previous open of this channel wants
+			 * exclusive access.
+			 */
+			error = -EBUSY;
+		} else {
+			hw->ccb_alloc[slot]->ccb_cnt++;
+			error = 0;
+		}
+	}
+	spin_unlock(&hw->alloc_lock);
+
+	if (!error)
+		fp->private_data = hw->ccb_alloc[slot];
+
+	return error;
+}
+
+static const struct file_operations ilo_fops = {
+	.owner		= THIS_MODULE,
+	.read		= ilo_read,
+	.write		= ilo_write,
+	.open 		= ilo_open,
+	.release 	= ilo_close,
+};
+
+static void ilo_unmap_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
+{
+	pci_iounmap(pdev, hw->db_vaddr);
+	pci_iounmap(pdev, hw->ram_vaddr);
+	pci_iounmap(pdev, hw->mmio_vaddr);
+}
+
+static int __devinit ilo_map_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
+{
+	int error = -ENOMEM;
+
+	/* map the memory mapped i/o registers */
+	hw->mmio_vaddr = pci_iomap(pdev, 1, 0);
+	if (hw->mmio_vaddr == NULL) {
+		dev_err(&pdev->dev, "Error mapping mmio\n");
+		goto out;
+	}
+
+	/* map the adapter shared memory region */
+	hw->ram_vaddr = pci_iomap(pdev, 2, MAX_CCB * ILOHW_CCB_SZ);
+	if (hw->ram_vaddr == NULL) {
+		dev_err(&pdev->dev, "Error mapping shared mem\n");
+		goto mmio_free;
+	}
+
+	/* map the doorbell aperture */
+	hw->db_vaddr = pci_iomap(pdev, 3, MAX_CCB * ONE_DB_SIZE);
+	if (hw->db_vaddr == NULL) {
+		dev_err(&pdev->dev, "Error mapping doorbell\n");
+		goto ram_free;
+	}
+
+	return 0;
+ram_free:
+	pci_iounmap(pdev, hw->ram_vaddr);
+mmio_free:
+	pci_iounmap(pdev, hw->mmio_vaddr);
+out:
+	return error;
+}
+
+static void ilo_remove(struct pci_dev *pdev)
+{
+	int i, minor;
+	struct ilo_hwinfo *ilo_hw = pci_get_drvdata(pdev);
+
+	clear_device(ilo_hw);
+
+	minor = MINOR(ilo_hw->cdev.dev);
+	for (i = minor; i < minor + MAX_CCB; i++)
+		device_destroy(ilo_class, MKDEV(ilo_major, i));
+
+	cdev_del(&ilo_hw->cdev);
+	ilo_unmap_device(pdev, ilo_hw);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	kfree(ilo_hw);
+	ilo_hwdev[(minor / MAX_CCB)] = 0;
+}
+
+static int __devinit ilo_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *ent)
+{
+	int devnum, minor, start, error;
+	struct ilo_hwinfo *ilo_hw;
+
+	/* find a free range for device files */
+	for (devnum = 0; devnum < MAX_ILO_DEV; devnum++) {
+		if (ilo_hwdev[devnum] == 0) {
+			ilo_hwdev[devnum] = 1;
+			break;
+		}
+	}
+
+	if (devnum == MAX_ILO_DEV) {
+		dev_err(&pdev->dev, "Error finding free device\n");
+		return -ENODEV;
+	}
+
+	/* track global allocations for this device */
+	error = -ENOMEM;
+	ilo_hw = kzalloc(sizeof(*ilo_hw), GFP_KERNEL);
+	if (!ilo_hw)
+		goto out;
+
+	ilo_hw->ilo_dev = pdev;
+	spin_lock_init(&ilo_hw->alloc_lock);
+	spin_lock_init(&ilo_hw->fifo_lock);
+
+	error = pci_enable_device(pdev);
+	if (error)
+		goto free;
+
+	pci_set_master(pdev);
+
+	error = pci_request_regions(pdev, ILO_NAME);
+	if (error)
+		goto disable;
+
+	error = ilo_map_device(pdev, ilo_hw);
+	if (error)
+		goto free_regions;
+
+	pci_set_drvdata(pdev, ilo_hw);
+	clear_device(ilo_hw);
+
+	cdev_init(&ilo_hw->cdev, &ilo_fops);
+	ilo_hw->cdev.owner = THIS_MODULE;
+	start = devnum * MAX_CCB;
+	error = cdev_add(&ilo_hw->cdev, MKDEV(ilo_major, start), MAX_CCB);
+	if (error) {
+		dev_err(&pdev->dev, "Could not add cdev\n");
+		goto unmap;
+	}
+
+	for (minor = 0 ; minor < MAX_CCB; minor++) {
+		struct device *dev;
+		dev = device_create(ilo_class, &pdev->dev,
+				    MKDEV(ilo_major, minor), NULL,
+				    "hpilo!d%dccb%d", devnum, minor);
+		if (IS_ERR(dev))
+			dev_err(&pdev->dev, "Could not create files\n");
+	}
+
+	return 0;
+unmap:
+	ilo_unmap_device(pdev, ilo_hw);
+free_regions:
+	pci_release_regions(pdev);
+disable:
+	pci_disable_device(pdev);
+free:
+	kfree(ilo_hw);
+out:
+	ilo_hwdev[devnum] = 0;
+	return error;
+}
+
+static struct pci_device_id ilo_devices[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB204) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, ilo_devices);
+
+static struct pci_driver ilo_driver = {
+	.name 	  = ILO_NAME,
+	.id_table = ilo_devices,
+	.probe 	  = ilo_probe,
+	.remove   = __devexit_p(ilo_remove),
+};
+
+static int __init ilo_init(void)
+{
+	int error;
+	dev_t dev;
+
+	ilo_class = class_create(THIS_MODULE, "iLO");
+	if (IS_ERR(ilo_class)) {
+		error = PTR_ERR(ilo_class);
+		goto out;
+	}
+
+	error = alloc_chrdev_region(&dev, 0, MAX_OPEN, ILO_NAME);
+	if (error)
+		goto class_destroy;
+
+	ilo_major = MAJOR(dev);
+
+	error =	pci_register_driver(&ilo_driver);
+	if (error)
+		goto chr_remove;
+
+	return 0;
+chr_remove:
+	unregister_chrdev_region(dev, MAX_OPEN);
+class_destroy:
+	class_destroy(ilo_class);
+out:
+	return error;
+}
+
+static void __exit ilo_exit(void)
+{
+	pci_unregister_driver(&ilo_driver);
+	unregister_chrdev_region(MKDEV(ilo_major, 0), MAX_OPEN);
+	class_destroy(ilo_class);
+}
+
+MODULE_VERSION("0.05");
+MODULE_ALIAS(ILO_NAME);
+MODULE_DESCRIPTION(ILO_NAME);
+MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
+MODULE_LICENSE("GPL v2");
+
+module_init(ilo_init);
+module_exit(ilo_exit);
diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h
new file mode 100644
index 00000000000..a281207696c
--- /dev/null
+++ b/drivers/misc/hpilo.h
@@ -0,0 +1,189 @@
+/*
+ * linux/drivers/char/hpilo.h
+ *
+ * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
+ *	David Altobelli <david.altobelli@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __HPILO_H
+#define __HPILO_H
+
+#define ILO_NAME "hpilo"
+
+/* max number of open channel control blocks per device, hw limited to 32 */
+#define MAX_CCB		8
+/* max number of supported devices */
+#define MAX_ILO_DEV	1
+/* max number of files */
+#define MAX_OPEN	(MAX_CCB * MAX_ILO_DEV)
+
+/*
+ * Per device, used to track global memory allocations.
+ */
+struct ilo_hwinfo {
+	/* mmio registers on device */
+	char __iomem *mmio_vaddr;
+
+	/* doorbell registers on device */
+	char __iomem *db_vaddr;
+
+	/* shared memory on device used for channel control blocks */
+	char __iomem *ram_vaddr;
+
+	/* files corresponding to this device */
+	struct ccb_data *ccb_alloc[MAX_CCB];
+
+	struct pci_dev *ilo_dev;
+
+	spinlock_t alloc_lock;
+	spinlock_t fifo_lock;
+
+	struct cdev cdev;
+};
+
+/* offset from mmio_vaddr */
+#define DB_OUT		0xD4
+/* DB_OUT reset bit */
+#define DB_RESET	26
+
+/*
+ * Channel control block. Used to manage hardware queues.
+ * The format must match hw's version.  The hw ccb is 128 bytes,
+ * but the context area shouldn't be touched by the driver.
+ */
+#define ILOSW_CCB_SZ	64
+#define ILOHW_CCB_SZ 	128
+struct ccb {
+	union {
+		char *send_fifobar;
+		u64 padding1;
+	} ccb_u1;
+	union {
+		char *send_desc;
+		u64 padding2;
+	} ccb_u2;
+	u64 send_ctrl;
+
+	union {
+		char *recv_fifobar;
+		u64 padding3;
+	} ccb_u3;
+	union {
+		char *recv_desc;
+		u64 padding4;
+	} ccb_u4;
+	u64 recv_ctrl;
+
+	union {
+		char __iomem *db_base;
+		u64 padding5;
+	} ccb_u5;
+
+	u64 channel;
+
+	/* unused context area (64 bytes) */
+};
+
+/* ccb queue parameters */
+#define SENDQ		1
+#define RECVQ 		2
+#define NR_QENTRY    	4
+#define L2_QENTRY_SZ 	12
+
+/* ccb ctrl bitfields */
+#define CTRL_BITPOS_L2SZ             0
+#define CTRL_BITPOS_FIFOINDEXMASK    4
+#define CTRL_BITPOS_DESCLIMIT        18
+#define CTRL_BITPOS_A                30
+#define CTRL_BITPOS_G                31
+
+/* ccb doorbell macros */
+#define L2_DB_SIZE		14
+#define ONE_DB_SIZE		(1 << L2_DB_SIZE)
+
+/*
+ * Per fd structure used to track the ccb allocated to that dev file.
+ */
+struct ccb_data {
+	/* software version of ccb, using virtual addrs */
+	struct ccb  driver_ccb;
+
+	/* hardware version of ccb, using physical addrs */
+	struct ccb  ilo_ccb;
+
+	/* hardware ccb is written to this shared mapped device memory */
+	struct ccb __iomem *mapped_ccb;
+
+	/* dma'able memory used for send/recv queues */
+	void       *dma_va;
+	dma_addr_t  dma_pa;
+	size_t      dma_size;
+
+	/* pointer to hardware device info */
+	struct ilo_hwinfo *ilo_hw;
+
+	/* usage count, to allow for shared ccb's */
+	int	    ccb_cnt;
+
+	/* open wanted exclusive access to this ccb */
+	int	    ccb_excl;
+};
+
+/*
+ * FIFO queue structure, shared with hw.
+ */
+#define ILO_START_ALIGN	4096
+#define ILO_CACHE_SZ 	 128
+struct fifo {
+    u64 nrents;	/* user requested number of fifo entries */
+    u64 imask;  /* mask to extract valid fifo index */
+    u64 merge;	/*  O/C bits to merge in during enqueue operation */
+    u64 reset;	/* set to non-zero when the target device resets */
+    u8  pad_0[ILO_CACHE_SZ - (sizeof(u64) * 4)];
+
+    u64 head;
+    u8  pad_1[ILO_CACHE_SZ - (sizeof(u64))];
+
+    u64 tail;
+    u8  pad_2[ILO_CACHE_SZ - (sizeof(u64))];
+
+    u64 fifobar[1];
+};
+
+/* convert between struct fifo, and the fifobar, which is saved in the ccb */
+#define FIFOHANDLESIZE (sizeof(struct fifo) - sizeof(u64))
+#define FIFOBARTOHANDLE(_fifo) \
+	((struct fifo *)(((char *)(_fifo)) - FIFOHANDLESIZE))
+
+/* the number of qwords to consume from the entry descriptor */
+#define ENTRY_BITPOS_QWORDS      0
+/* descriptor index number (within a specified queue) */
+#define ENTRY_BITPOS_DESCRIPTOR  10
+/* state bit, fifo entry consumed by consumer */
+#define ENTRY_BITPOS_C           22
+/* state bit, fifo entry is occupied */
+#define ENTRY_BITPOS_O           23
+
+#define ENTRY_BITS_QWORDS        10
+#define ENTRY_BITS_DESCRIPTOR    12
+#define ENTRY_BITS_C             1
+#define ENTRY_BITS_O             1
+#define ENTRY_BITS_TOTAL	\
+	(ENTRY_BITS_C + ENTRY_BITS_O + \
+	 ENTRY_BITS_QWORDS + ENTRY_BITS_DESCRIPTOR)
+
+/* extract various entry fields */
+#define ENTRY_MASK ((1 << ENTRY_BITS_TOTAL) - 1)
+#define ENTRY_MASK_C (((1 << ENTRY_BITS_C) - 1) << ENTRY_BITPOS_C)
+#define ENTRY_MASK_O (((1 << ENTRY_BITS_O) - 1) << ENTRY_BITPOS_O)
+#define ENTRY_MASK_QWORDS \
+	(((1 << ENTRY_BITS_QWORDS) - 1) << ENTRY_BITPOS_QWORDS)
+#define ENTRY_MASK_DESCRIPTOR \
+	(((1 << ENTRY_BITS_DESCRIPTOR) - 1) << ENTRY_BITPOS_DESCRIPTOR)
+
+#define ENTRY_MASK_NOSTATE (ENTRY_MASK >> (ENTRY_BITS_C + ENTRY_BITS_O))
+
+#endif /* __HPILO_H */
-- 
cgit v1.2.3


From eadcf0d704a46979c29984fa05f1fc413c775bcb Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 2 Jul 2008 12:46:22 -0700
Subject: MTD: handle pci_name() being const

This changes the MTD core to handle pci_name() now returning a constant
string.

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/mtd/devices/block2mtd.c | 8 +++++---
 include/linux/mtd/map.h         | 2 +-
 include/linux/mtd/mtd.h         | 2 +-
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 519d942e794..7b72a1b3611 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -241,6 +241,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 {
 	struct block_device *bdev;
 	struct block2mtd_dev *dev;
+	char *name;
 
 	if (!devname)
 		return NULL;
@@ -279,12 +280,13 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
 
 	/* Setup the MTD structure */
 	/* make the name contain the block device in */
-	dev->mtd.name = kmalloc(sizeof("block2mtd: ") + strlen(devname),
+	name = kmalloc(sizeof("block2mtd: ") + strlen(devname) + 1,
 			GFP_KERNEL);
-	if (!dev->mtd.name)
+	if (!name)
 		goto devinit_err;
 
-	sprintf(dev->mtd.name, "block2mtd: %s", devname);
+	sprintf(name, "block2mtd: %s", devname);
+	dev->mtd.name = name;
 
 	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
 	dev->mtd.erasesize = erase_size;
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index a9fae032ba8..9c1d95491f8 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -189,7 +189,7 @@ typedef union {
 */
 
 struct map_info {
-	char *name;
+	const char *name;
 	unsigned long size;
 	resource_size_t phys;
 #define NO_XIP (-1UL)
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 245f9098e17..8b5d49133ec 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -121,7 +121,7 @@ struct mtd_info {
 	u_int32_t oobavail;  // Available OOB bytes per block
 
 	// Kernel-only stuff starts here.
-	char *name;
+	const char *name;
 	int index;
 
 	/* ecc layout structure pointer - read only ! */
-- 
cgit v1.2.3


From 361d5ee3c04c43c8fa0e277545ac5258dc310a5e Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 2 Jul 2008 12:46:22 -0700
Subject: 3c59x: handle pci_name() being const

This changes vortex_prob1() to handle pci_name() now returning a
constant string.

Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/net/3c59x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index aabad8ce745..8db4e6b8948 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -1010,7 +1010,7 @@ static int __devinit vortex_probe1(struct device *gendev,
 	static int printed_version;
 	int retval, print_info;
 	struct vortex_chip_info * const vci = &vortex_info_tbl[chip_idx];
-	char *print_name = "3c59x";
+	const char *print_name = "3c59x";
 	struct pci_dev *pdev = NULL;
 	struct eisa_device *edev = NULL;
 	DECLARE_MAC_BUF(mac);
-- 
cgit v1.2.3


From 2222c313e9371b6476787594bc5804c72cee2597 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri, 2 May 2008 06:02:41 +0200
Subject: sparc64: fix up bus_id changes in sparc core code

This converts all instances of bus_id in the sparc core kernel to use
either dev_set_name(), or dev_name() depending on the need.

This is done in anticipation of removing the bus_id field from struct
driver.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/sparc64/kernel/ebus.c      |  4 ++--
 arch/sparc64/kernel/of_device.c |  4 ++--
 arch/sparc64/kernel/pci.c       |  2 +-
 arch/sparc64/kernel/vio.c       | 16 +++++++---------
 drivers/sbus/sbus.c             |  6 +++---
 5 files changed, 15 insertions(+), 17 deletions(-)

diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index c49d0388b79..4d58d7ce708 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -401,7 +401,7 @@ static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_de
 	dev->ofdev.node = dp;
 	dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
 	dev->ofdev.dev.bus = &ebus_bus_type;
-	sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node);
+	dev_set_name(&dev->ofdev.dev, "ebus[%08x]", dp->node);
 
 	/* Register with core */
 	if (of_device_register(&dev->ofdev) != 0)
@@ -501,7 +501,7 @@ void __init ebus_init(void)
 		ebus->ofdev.node = dp;
 		ebus->ofdev.dev.parent = &pdev->dev;
 		ebus->ofdev.dev.bus = &ebus_bus_type;
-		sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus);
+		dev_set_name(&ebus->ofdev.dev, "ebus%d", num_ebus);
 
 		/* Register with core */
 		if (of_device_register(&ebus->ofdev) != 0)
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index d569f60c24b..4fd48ab7dda 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -797,9 +797,9 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 	op->dev.parent = parent;
 	op->dev.bus = &of_platform_bus_type;
 	if (!parent)
-		strcpy(op->dev.bus_id, "root");
+		dev_set_name(&op->dev, "root");
 	else
-		sprintf(op->dev.bus_id, "%08x", dp->node);
+		dev_set_name(&op->dev, "%08x", dp->node);
 
 	if (of_device_register(op)) {
 		printk("%s: Could not register of device.\n",
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index d00a3656c28..55096195458 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -408,7 +408,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->class = class >> 8;
 	dev->revision = class & 0xff;
 
-	sprintf(dev->dev.bus_id, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
 		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
 	if (ofpci_verbose)
diff --git a/arch/sparc64/kernel/vio.c b/arch/sparc64/kernel/vio.c
index ecbb8b618b8..a490077891a 100644
--- a/arch/sparc64/kernel/vio.c
+++ b/arch/sparc64/kernel/vio.c
@@ -260,16 +260,14 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	vio_fill_channel_info(hp, mp, vdev);
 
 	if (!id) {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s",
-			 bus_id_name);
+		dev_set_name(&vdev->dev, "%s", bus_id_name);
 		vdev->dev_no = ~(u64)0;
 	} else if (!cfg_handle) {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu",
-			 bus_id_name, *id);
+		dev_set_name(&vdev->dev, "%s-%lu", bus_id_name, *id);
 		vdev->dev_no = *id;
 	} else {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu-%lu",
-			 bus_id_name, *cfg_handle, *id);
+		dev_set_name(&vdev->dev, "%s-%lu-%lu", bus_id_name,
+			     *cfg_handle, *id);
 		vdev->dev_no = *cfg_handle;
 	}
 
@@ -292,12 +290,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	}
 	vdev->dp = dp;
 
-	printk(KERN_INFO "VIO: Adding device %s\n", vdev->dev.bus_id);
+	printk(KERN_INFO "VIO: Adding device %s\n", dev_name(&vdev->dev));
 
 	err = device_register(&vdev->dev);
 	if (err) {
 		printk(KERN_ERR "VIO: Could not register device %s, err=%d\n",
-		       vdev->dev.bus_id, err);
+		       dev_name(&vdev->dev), err);
 		kfree(vdev);
 		return NULL;
 	}
@@ -330,7 +328,7 @@ static void vio_remove(struct mdesc_handle *hp, u64 node)
 	dev = device_find_child(&root_vdev->dev, (void *) node,
 				vio_md_node_match);
 	if (dev) {
-		printk(KERN_INFO "VIO: Removing device %s\n", dev->bus_id);
+		printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev));
 
 		device_unregister(dev);
 	}
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
index c37d7c2587f..73a86d09bba 100644
--- a/drivers/sbus/sbus.c
+++ b/drivers/sbus/sbus.c
@@ -78,7 +78,7 @@ static void __init fill_sbus_device(struct device_node *dp, struct sbus_dev *sde
 	else
 		sdev->ofdev.dev.parent = &sdev->bus->ofdev.dev;
 	sdev->ofdev.dev.bus = &sbus_bus_type;
-	sprintf(sdev->ofdev.dev.bus_id, "sbus[%08x]", dp->node);
+	dev_set_name(&sdev->ofdev.dev, "sbus[%08x]", dp->node);
 
 	if (of_device_register(&sdev->ofdev) != 0)
 		printk(KERN_DEBUG "sbus: device registration error for %s!\n",
@@ -257,11 +257,11 @@ static void __init build_one_sbus(struct device_node *dp, int num_sbus)
 	sbus->ofdev.node = dp;
 	sbus->ofdev.dev.parent = NULL;
 	sbus->ofdev.dev.bus = &sbus_bus_type;
-	sprintf(sbus->ofdev.dev.bus_id, "sbus%d", num_sbus);
+	dev_set_name(&sbus->ofdev.dev, "sbus%d", num_sbus);
 
 	if (of_device_register(&sbus->ofdev) != 0)
 		printk(KERN_DEBUG "sbus: device registration error for %s!\n",
-		       sbus->ofdev.dev.bus_id);
+		       dev_name(&sbus->ofdev.dev));
 
 	dev_dp = dp->child;
 	while (dev_dp) {
-- 
cgit v1.2.3


From 3f9787046ea37a26170dc4439efa21f8d23a9978 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Fri, 30 May 2008 17:42:11 +0200
Subject: arm: bus_id -> dev_name() and dev_set_name() conversions

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/arm/common/locomo.c         | 2 +-
 arch/arm/common/sa1111.c         | 7 +++----
 arch/arm/common/scoop.c          | 2 +-
 arch/arm/kernel/ecard.c          | 2 +-
 arch/arm/mach-integrator/impd1.c | 4 +---
 arch/arm/mach-integrator/lm.c    | 6 ++++--
 arch/arm/plat-omap/mailbox.c     | 2 +-
 drivers/net/arm/at91_ether.c     | 2 +-
 drivers/net/arm/ep93xx_eth.c     | 2 +-
 drivers/net/arm/etherh.c         | 6 +++---
 10 files changed, 17 insertions(+), 18 deletions(-)

diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index d973c986f72..c3c3a333904 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -543,7 +543,6 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		goto out;
 	}
 
-	strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
 	/*
 	 * If the parent device has a DMA mask associated with it,
 	 * propagate it down to the children.
@@ -553,6 +552,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		dev->dev.dma_mask = &dev->dma_mask;
 	}
 
+	dev_set_name(&dev->dev, "%s", info->name);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = lchip->dev;
 	dev->dev.bus     = &locomo_bus_type;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 2048ae0b155..c8e8f0ea59e 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -550,9 +550,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		goto out;
 	}
 
-	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
-		 "%4.4lx", info->offset);
-
+	dev_set_name(&dev->dev, "%4.4lx", info->offset);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = sachip->dev;
 	dev->dev.bus     = &sa1111_bus_type;
@@ -560,7 +558,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
 	dev->res.start   = sachip->phys + info->offset;
 	dev->res.end     = dev->res.start + 511;
-	dev->res.name    = dev->dev.bus_id;
+	dev->res.name    = dev_name(&dev->dev);
 	dev->res.flags   = IORESOURCE_MEM;
 	dev->mapbase     = sachip->base + info->offset;
 	dev->skpcr_mask  = info->skpcr_mask;
@@ -570,6 +568,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	if (ret) {
 		printk("SA1111: failed to allocate resource for %s\n",
 			dev->res.name);
+		dev_set_name(&dev->dev, NULL);
 		kfree(dev);
 		goto out;
 	}
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index bc299b07a6f..ae39553589d 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -247,7 +247,7 @@ static int __devinit scoop_probe(struct platform_device *pdev)
 	devptr->gpio.base = -1;
 
 	if (inf->gpio_base != 0) {
-		devptr->gpio.label = pdev->dev.bus_id;
+		devptr->gpio.label = dev_name(&pdev->dev);
 		devptr->gpio.base = inf->gpio_base;
 		devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
 		devptr->gpio.set = scoop_gpio_set;
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 2de425f62c2..f5cfdabcb87 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -783,7 +783,7 @@ static void ecard_proc_init(void)
 
 #define ec_set_resource(ec,nr,st,sz)				\
 	do {							\
-		(ec)->resource[nr].name = ec->dev.bus_id;	\
+		(ec)->resource[nr].name = dev_name(&ec->dev);	\
 		(ec)->resource[nr].start = st;			\
 		(ec)->resource[nr].end = (st) + (sz) - 1;	\
 		(ec)->resource[nr].flags = IORESOURCE_MEM;	\
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 619d05e6cf7..5a1588cf824 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -393,9 +393,7 @@ static int impd1_probe(struct lm_device *dev)
 		if (!d)
 			continue;
 
-		snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
-			 "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-
+		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
 		d->dev.parent	= &dev->dev;
 		d->res.start	= dev->resource.start + idev->offset;
 		d->res.end	= d->res.start + SZ_4K - 1;
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index 622cdc4212d..f939c509140 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -81,8 +81,10 @@ int lm_device_register(struct lm_device *dev)
 	dev->dev.release = lm_device_release;
 	dev->dev.bus = &lm_bustype;
 
-	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "lm%d", dev->id);
-	dev->resource.name = dev->dev.bus_id;
+	ret = dev_set_name(&dev->dev, "lm%d", dev->id);
+	if (ret)
+		return ret;
+	dev->resource.name = dev_name(&dev->dev);
 
 	ret = request_resource(&iomem_resource, &dev->resource);
 	if (ret == 0) {
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 848fdcafaa2..ff1413eae0b 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -334,7 +334,7 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 	}
 
 	mbox->dev.class = &omap_mbox_class;
-	strlcpy(mbox->dev.bus_id, mbox->name, BUS_ID_SIZE);
+	dev_set_name(&mbox->dev, "%s", mbox->name);
 	dev_set_drvdata(&mbox->dev, mbox);
 
 	ret = device_register(&mbox->dev);
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 1e39e78f177..71f7cec3091 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -677,7 +677,7 @@ static void at91ether_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo
 {
 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
 	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
-	strlcpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info));
+	strlcpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
 }
 
 static const struct ethtool_ops at91ether_ethtool_ops = {
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index ecd8fc6146e..7a14980f347 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -848,7 +848,7 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
 
 	ep->res = request_mem_region(pdev->resource[0].start,
 			pdev->resource[0].end - pdev->resource[0].start + 1,
-			pdev->dev.bus_id);
+			dev_name(&pdev->dev));
 	if (ep->res == NULL) {
 		dev_err(&pdev->dev, "Could not reserve memory region\n");
 		err = -ENOMEM;
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index e9d15eccad0..5c5f1e470d3 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -535,7 +535,7 @@ static int __init etherh_addr(char *addr, struct expansion_card *ec)
 	
 	if (!ecard_readchunk(&cd, ec, 0xf5, 0)) {
 		printk(KERN_ERR "%s: unable to read podule description string\n",
-		       ec->dev.bus_id);
+		       dev_name(&ec->dev));
 		goto no_addr;
 	}
 
@@ -554,7 +554,7 @@ static int __init etherh_addr(char *addr, struct expansion_card *ec)
 	}
 
 	printk(KERN_ERR "%s: unable to parse MAC address: %s\n",
-	       ec->dev.bus_id, cd.d.string);
+	       dev_name(&ec->dev), cd.d.string);
 
  no_addr:
 	return -ENODEV;
@@ -585,7 +585,7 @@ static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *i
 {
 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
 	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
-	strlcpy(info->bus_info, dev->dev.parent->bus_id,
+	strlcpy(info->bus_info, dev_name(dev->dev.parent),
 		sizeof(info->bus_info));
 }
 
-- 
cgit v1.2.3


From 988781dc3e1d9209192b04458d279815923f5e76 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Mon, 21 Jul 2008 11:21:43 -0700
Subject: x86: use setup_clear_cpu_cap with disable_apic, fix

beauty fix: /proc/cpuinfo will still show apic feature even if
we booted up with it disabled.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index ec952aa5394..b4aacb9f52e 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -680,7 +680,7 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_X86_LOCAL_APIC
 		disable_apic = 1;
 #endif
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+		setup_clear_cpu_cap(X86_FEATURE_APIC);
 	}
 
 #ifdef CONFIG_PCI
-- 
cgit v1.2.3


From 11d579ee0a19052a5a90ebfe0c39e7ed8ce8a9dc Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Sat, 28 Jun 2008 20:31:52 +0200
Subject: powerpc/mpc5200: Fix wrong 'no interrupt' handling in of_i2c

If an I2C device node does not specify an interrupt, the .irq member of the
board_info struct was set to -1. This caused crashes on following
irq_dispose_mappings. Leave it NO_IRQ as returned from irq_of_parse_and_map.
(Suggesting -1 as 'i2c-no-irq' used to be a bug in linux/i2c.h.)

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/of/of_i2c.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 5c015d310d4..344e1b03dd8 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -91,8 +91,6 @@ void of_register_i2c_devices(struct i2c_adapter *adap,
 		}
 
 		info.irq = irq_of_parse_and_map(node, 0);
-		if (info.irq == NO_IRQ)
-			info.irq = -1;
 
 		if (of_find_i2c_driver(node, &info) < 0) {
 			irq_dispose_mapping(info.irq);
-- 
cgit v1.2.3


From 6a4a636fad018500c5db7a2b56a00caeb21cbb2c Mon Sep 17 00:00:00 2001
From: Jon Smirl <jonsmirl@gmail.com>
Date: Sun, 20 Jul 2008 11:27:22 -0400
Subject: powerpc/mpc5200: Add AC97 register definitions for the MPC52xx PSC

Needed by the PSC AC97 sound driver

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 include/asm-powerpc/mpc52xx_psc.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h
index 710c5d36efa..5467c2c0faa 100644
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ b/include/asm-powerpc/mpc52xx_psc.h
@@ -132,8 +132,12 @@ struct mpc52xx_psc {
 	u8		reserved5[3];
 	u8		ctlr;		/* PSC + 0x1c */
 	u8		reserved6[3];
-	u16		ccr;		/* PSC + 0x20 */
-	u8		reserved7[14];
+	/* BitClkDiv field of CCR is byte swapped in
+	 * the hardware for mpc5200/b compatibility */
+	u32		ccr;		/* PSC + 0x20 */
+	u32		ac97_slots;	/* PSC + 0x24 */
+	u32		ac97_cmd;	/* PSC + 0x28 */
+	u32		ac97_data;	/* PSC + 0x2c */
 	u8		ivr;		/* PSC + 0x30 */
 	u8		reserved8[3];
 	u8		ip;		/* PSC + 0x34 */
-- 
cgit v1.2.3


From 78f56bd3d2dbe173bf1a946b353bf72ab9c0b94e Mon Sep 17 00:00:00 2001
From: Jon Smirl <jonsmirl@gmail.com>
Date: Sun, 20 Jul 2008 11:30:08 -0400
Subject: powerpc/mpc5200: Remove fsl-soc.c from mpc5200 build, it is not
 needed.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/52xx/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index acd2fc8cf49..981b84b7599 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,7 +1,6 @@
 config PPC_MPC52xx
 	bool "52xx-based boards"
 	depends on PPC_MULTIPLATFORM && PPC32
-	select FSL_SOC
 	select PPC_CLOCK
 
 config PPC_MPC5200_SIMPLE
-- 
cgit v1.2.3


From 6d5509babce654fd9ce0ff6689dbdf6ce56c43ae Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 15 May 2008 17:04:53 -0600
Subject: powerpc/mpc5200: Make mpc5200 GPIO driver select the GENERIC_GPIO
 config

CONFIG_GENERIC_GPIO is needed for the gpio driver to work.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/52xx/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 981b84b7599..c1ca4f3ee5d 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -46,6 +46,7 @@ config PPC_MPC5200_BUGFIX
 config PPC_MPC5200_GPIO
 	bool "MPC5200 GPIO support"
 	depends on PPC_MPC52xx
+	select GENERIC_GPIO
 	select HAVE_GPIO_LIB
 	help
 	  Enable gpiolib support for mpc5200 based boards
-- 
cgit v1.2.3


From a19dd1bd7df839c52a668abcf288c2239442c3c9 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Tue, 22 Jul 2008 01:13:54 -0600
Subject: powerpc/mpc5200: add PSC SICR bit definitions

Required by the PSC I2S audio driver.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 include/asm-powerpc/mpc52xx_psc.h | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h
index 5467c2c0faa..8917ed63056 100644
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ b/include/asm-powerpc/mpc52xx_psc.h
@@ -60,10 +60,12 @@
 #define MPC52xx_PSC_RXTX_FIFO_ALARM	0x0002
 #define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
 
-/* PSC interrupt mask bits */
+/* PSC interrupt status/mask bits */
 #define MPC52xx_PSC_IMR_TXRDY		0x0100
 #define MPC52xx_PSC_IMR_RXRDY		0x0200
 #define MPC52xx_PSC_IMR_DB		0x0400
+#define MPC52xx_PSC_IMR_TXEMP		0x0800
+#define MPC52xx_PSC_IMR_ORERR		0x1000
 #define MPC52xx_PSC_IMR_IPC		0x8000
 
 /* PSC input port change bit */
@@ -92,6 +94,34 @@
 
 #define MPC52xx_PSC_RFNUM_MASK	0x01ff
 
+#define MPC52xx_PSC_SICR_DTS1			(1 << 29)
+#define MPC52xx_PSC_SICR_SHDR			(1 << 28)
+#define MPC52xx_PSC_SICR_SIM_MASK		(0xf << 24)
+#define MPC52xx_PSC_SICR_SIM_UART		(0x0 << 24)
+#define MPC52xx_PSC_SICR_SIM_UART_DCD		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_8		(0x1 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_16		(0x2 << 24)
+#define MPC52xx_PSC_SICR_SIM_AC97		(0x3 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR_DCD		(0xc << 24)
+#define MPC52xx_PSC_SICR_SIM_MIR		(0x5 << 24)
+#define MPC52xx_PSC_SICR_SIM_FIR		(0x6 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_24		(0x7 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_32		(0xf << 24)
+#define MPC52xx_PSC_SICR_GENCLK			(1 << 23)
+#define MPC52xx_PSC_SICR_I2S			(1 << 22)
+#define MPC52xx_PSC_SICR_CLKPOL			(1 << 21)
+#define MPC52xx_PSC_SICR_SYNCPOL		(1 << 20)
+#define MPC52xx_PSC_SICR_CELLSLAVE		(1 << 19)
+#define MPC52xx_PSC_SICR_CELL2XCLK		(1 << 18)
+#define MPC52xx_PSC_SICR_ESAI			(1 << 17)
+#define MPC52xx_PSC_SICR_ENAC97			(1 << 16)
+#define MPC52xx_PSC_SICR_SPI			(1 << 15)
+#define MPC52xx_PSC_SICR_MSTR			(1 << 14)
+#define MPC52xx_PSC_SICR_CPOL			(1 << 13)
+#define MPC52xx_PSC_SICR_CPHA			(1 << 12)
+#define MPC52xx_PSC_SICR_USEEOF			(1 << 11)
+#define MPC52xx_PSC_SICR_DISABLEEOF		(1 << 10)
 
 /* Structure of the hardware registers */
 struct mpc52xx_psc {
-- 
cgit v1.2.3


From 79c28acb2b7d66ca48d23e1c8b5e9e043aa634f8 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Fri, 11 Jul 2008 16:17:57 -0600
Subject: of-bindings: Add binding documentation for SPI busses and devices

Add documentation about how to describe SPI busses in the device tree.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
---
 Documentation/powerpc/booting-without-of.txt | 57 ++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index aee243a846a..ee92fedada1 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -59,6 +59,7 @@ Table of Contents
       p) Freescale Synchronous Serial Interface
 	  q) USB EHCI controllers
       r) MDIO on GPIOs
+      s) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -1881,6 +1882,62 @@ platforms are moved over to use the flattened-device-tree model.
 			 &qe_pio_c 6>;
 	};
 
+    s) SPI (Serial Peripheral Interface) busses
+
+    SPI busses can be described with a node for the SPI master device
+    and a set of child nodes for each SPI slave on the bus.  For this
+    discussion, it is assumed that the system's SPI controller is in
+    SPI master mode.  This binding does not describe SPI controllers
+    in slave mode.
+
+    The SPI master node requires the following properties:
+    - #address-cells  - number of cells required to define a chip select
+			address on the SPI bus.
+    - #size-cells     - should be zero.
+    - compatible      - name of SPI bus controller following generic names
+			recommended practice.
+    No other properties are required in the SPI bus node.  It is assumed
+    that a driver for an SPI bus device will understand that it is an SPI bus.
+    However, the binding does not attempt to define the specific method for
+    assigning chip select numbers.  Since SPI chip select configuration is
+    flexible and non-standardized, it is left out of this binding with the
+    assumption that board specific platform code will be used to manage
+    chip selects.  Individual drivers can define additional properties to
+    support describing the chip select layout.
+
+    SPI slave nodes must be children of the SPI master node and can
+    contain the following properties.
+    - reg             - (required) chip select address of device.
+    - compatible      - (required) name of SPI device following generic names
+			recommended practice
+    - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+    - spi-cpol        - (optional) Empty property indicating device requires
+			inverse clock polarity (CPOL) mode
+    - spi-cpha        - (optional) Empty property indicating device requires
+			shifted clock phase (CPHA) mode
+
+    SPI example for an MPC5200 SPI bus:
+		spi@f00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+			interrupt-parent = <&mpc5200_pic>;
+
+			ethernet-switch@0 {
+				compatible = "micrel,ks8995m";
+				spi-max-frequency = <1000000>;
+				reg = <0>;
+			};
+
+			codec@1 {
+				compatible = "ti,tlv320aic26";
+				spi-max-frequency = <100000>;
+				reg = <1>;
+			};
+		};
+
 VII - Marvell Discovery mv64[345]6x System Controller chips
 ===========================================================
 
-- 
cgit v1.2.3


From c2e3277f875b83e5adc34e96989d6d87ec5f80f7 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 22 Jul 2008 15:40:46 +1000
Subject: x86: fix pte_flags() to only return flags, fix lguest (updated)

(Jeremy said:
	rusty: use PTE_MASK
	rusty: use PTE_MASK
	rusty: use PTE_MASK
 When I asked:
	jsgf: does that include the NX flag?
 He responded eloquently:
	rusty: use PTE_MASK
	rusty: use PTE_MASK
	yes, it's the official constant of masking flags out of ptes
)

Change a15af1c9ea2750a9ff01e51615c45950bad8221b 'x86/paravirt: add
pte_flags to just get pte flags' removed lguest's private pte_flags()
in favor of a generic one.

Unfortunately, the generic one doesn't filter out the non-flags bits:
this results in lguest creating corrupt shadow page tables and blowing
up host memory.

Since noone is supposed to use the pfn part of pte_flags(), it seems
safest to always do the filtering.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-and-morning-tea-spilled-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/paravirt.c | 2 +-
 include/asm-x86/page.h     | 7 ++++++-
 include/asm-x86/paravirt.h | 3 +++
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 097d8a6797f..94da4d52d79 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -443,7 +443,7 @@ struct pv_mmu_ops pv_mmu_ops = {
 #endif /* PAGETABLE_LEVELS >= 3 */
 
 	.pte_val = native_pte_val,
-	.pte_flags = native_pte_val,
+	.pte_flags = native_pte_flags,
 	.pgd_val = native_pgd_val,
 
 	.make_pte = native_make_pte,
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index 28d7b4533b1..05d9bea2bfd 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -144,6 +144,11 @@ static inline pteval_t native_pte_val(pte_t pte)
 	return pte.pte;
 }
 
+static inline pteval_t native_pte_flags(pte_t pte)
+{
+	return native_pte_val(pte) & ~PTE_MASK;
+}
+
 #define pgprot_val(x)	((x).pgprot)
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
@@ -165,7 +170,7 @@ static inline pteval_t native_pte_val(pte_t pte)
 #endif
 
 #define pte_val(x)	native_pte_val(x)
-#define pte_flags(x)	native_pte_val(x)
+#define pte_flags(x)	native_pte_flags(x)
 #define __pte(x)	native_make_pte(x)
 
 #endif	/* CONFIG_PARAVIRT */
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
index aec9767836b..5ca4639dc7d 100644
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -1088,6 +1088,9 @@ static inline pteval_t pte_flags(pte_t pte)
 		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags,
 				 pte.pte);
 
+#ifdef CONFIG_PARAVIRT_DEBUG
+	BUG_ON(ret & PTE_MASK);
+#endif
 	return ret;
 }
 
-- 
cgit v1.2.3


From 59438c9fc4f7a92c808c9049bc6b396f98bf954c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 21 Jul 2008 22:59:42 -0700
Subject: x86: rename PTE_MASK to PTE_PFN_MASK

Rusty, in his peevish way, complained that macros defining constants
should have a name which somewhat accurately reflects the actual
purpose of the constant.

Aside from the fact that PTE_MASK gives no clue as to what's actually
being masked, and is misleadingly similar to the functionally entirely
different PMD_MASK, PUD_MASK and PGD_MASK, I don't really see what the
problem is.

But if this patch silences the incessent noise, then it will have
achieved its goal (TODO: write test-case).

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/dump_pagetables.c    | 10 +++++-----
 arch/x86/xen/enlighten.c         |  2 +-
 arch/x86/xen/mmu.c               |  8 ++++----
 include/asm-x86/page.h           |  6 +++---
 include/asm-x86/paravirt.h       |  2 +-
 include/asm-x86/pgtable-3level.h |  8 ++++----
 include/asm-x86/pgtable.h        |  4 ++--
 include/asm-x86/pgtable_32.h     |  4 ++--
 include/asm-x86/pgtable_64.h     | 10 +++++-----
 include/asm-x86/xen/page.h       |  2 +-
 10 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 0bb0caed897..cc174fc412b 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -148,8 +148,8 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot) & ~(PTE_MASK);
-	cur = pgprot_val(st->current_prot) & ~(PTE_MASK);
+	prot = pgprot_val(new_prot) & ~(PTE_PFN_MASK);
+	cur = pgprot_val(st->current_prot) & ~(PTE_PFN_MASK);
 
 	if (!st->level) {
 		/* First entry */
@@ -221,7 +221,7 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
 	for (i = 0; i < PTRS_PER_PMD; i++) {
 		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
 		if (!pmd_none(*start)) {
-			pgprotval_t prot = pmd_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pmd_val(*start) & ~PTE_PFN_MASK;
 
 			if (pmd_large(*start) || !pmd_present(*start))
 				note_page(m, st, __pgprot(prot), 3);
@@ -253,7 +253,7 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
 	for (i = 0; i < PTRS_PER_PUD; i++) {
 		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
 		if (!pud_none(*start)) {
-			pgprotval_t prot = pud_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pud_val(*start) & ~PTE_PFN_MASK;
 
 			if (pud_large(*start) || !pud_present(*start))
 				note_page(m, st, __pgprot(prot), 2);
@@ -288,7 +288,7 @@ static void walk_pgd_level(struct seq_file *m)
 	for (i = 0; i < PTRS_PER_PGD; i++) {
 		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
 		if (!pgd_none(*start)) {
-			pgprotval_t prot = pgd_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pgd_val(*start) & ~PTE_PFN_MASK;
 
 			if (pgd_large(*start) || !pgd_present(*start))
 				note_page(m, &st, __pgprot(prot), 1);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 194bbd6e324..9ff6e3cbf08 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1435,7 +1435,7 @@ static unsigned long m2p(phys_addr_t maddr)
 {
 	phys_addr_t paddr;
 
-	maddr &= PTE_MASK;
+	maddr &= PTE_PFN_MASK;
 	paddr = mfn_to_pfn(maddr >> PAGE_SHIFT) << PAGE_SHIFT;
 
 	return paddr;
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index a44d56e38bd..0db6912395e 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -343,8 +343,8 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 static pteval_t pte_mfn_to_pfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
-		unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_MASK;
+		unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+		pteval_t flags = val & ~PTE_PFN_MASK;
 		val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
 	}
 
@@ -354,8 +354,8 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
 static pteval_t pte_pfn_to_mfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
-		unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_MASK;
+		unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+		pteval_t flags = val & ~PTE_PFN_MASK;
 		val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
 	}
 
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index 05d9bea2bfd..e99fb9fe6f8 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -18,8 +18,8 @@
    (ie, 32-bit PAE). */
 #define PHYSICAL_PAGE_MASK	(((signed long)PAGE_MASK) & __PHYSICAL_MASK)
 
-/* PTE_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
-#define PTE_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
+/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
 
 #define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
 #define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
@@ -146,7 +146,7 @@ static inline pteval_t native_pte_val(pte_t pte)
 
 static inline pteval_t native_pte_flags(pte_t pte)
 {
-	return native_pte_val(pte) & ~PTE_MASK;
+	return native_pte_val(pte) & ~PTE_PFN_MASK;
 }
 
 #define pgprot_val(x)	((x).pgprot)
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
index 5ca4639dc7d..fbbde93f12d 100644
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -1089,7 +1089,7 @@ static inline pteval_t pte_flags(pte_t pte)
 				 pte.pte);
 
 #ifdef CONFIG_PARAVIRT_DEBUG
-	BUG_ON(ret & PTE_MASK);
+	BUG_ON(ret & PTE_PFN_MASK);
 #endif
 	return ret;
 }
diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
index c93dbb6c262..105057f3403 100644
--- a/include/asm-x86/pgtable-3level.h
+++ b/include/asm-x86/pgtable-3level.h
@@ -25,7 +25,7 @@ static inline int pud_none(pud_t pud)
 
 static inline int pud_bad(pud_t pud)
 {
-	return (pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
+	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
 }
 
 static inline int pud_present(pud_t pud)
@@ -120,9 +120,9 @@ static inline void pud_clear(pud_t *pudp)
 		write_cr3(pgd);
 }
 
-#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_MASK))
+#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_PFN_MASK))
 
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_MASK))
+#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
 
 
 /* Find an entry in the second-level page table.. */
@@ -160,7 +160,7 @@ static inline int pte_none(pte_t pte)
 
 static inline unsigned long pte_pfn(pte_t pte)
 {
-	return (pte_val(pte) & PTE_MASK) >> PAGE_SHIFT;
+	return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
 }
 
 /*
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 96aa76e691d..2b1746c9237 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -53,7 +53,7 @@
 			 _PAGE_DIRTY)
 
 /* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_PCD | _PAGE_PWT |		\
+#define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
 			 _PAGE_ACCESSED | _PAGE_DIRTY)
 
 #define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
@@ -286,7 +286,7 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 	return __pgprot(preservebits | addbits);
 }
 
-#define pte_pgprot(x) __pgprot(pte_flags(x) & ~PTE_MASK)
+#define pte_pgprot(x) __pgprot(pte_flags(x) & ~PTE_PFN_MASK)
 
 #define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
 
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index 0611abf96a5..525b53e65b4 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -88,7 +88,7 @@ extern unsigned long pg0[];
 /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
 #define pmd_none(x)	(!(unsigned long)pmd_val((x)))
 #define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (~PTE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pmd_bad(x) ((pmd_val(x) & (~PTE_PFN_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
 
 #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
 
@@ -139,7 +139,7 @@ static inline int pud_large(pud_t pud) { return 0; }
 #define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
 
 #define pmd_page_vaddr(pmd)					\
-	((unsigned long)__va(pmd_val((pmd)) & PTE_MASK))
+	((unsigned long)__va(pmd_val((pmd)) & PTE_PFN_MASK))
 
 #if defined(CONFIG_HIGHPTE)
 #define pte_offset_map(dir, address)					\
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index 805d3128bfc..ac5fff4cc58 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -158,17 +158,17 @@ static inline void native_pgd_clear(pgd_t *pgd)
 
 static inline int pgd_bad(pgd_t pgd)
 {
-	return (pgd_val(pgd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
 
 static inline int pud_bad(pud_t pud)
 {
-	return (pud_val(pud) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+	return (pud_val(pud) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
 
 static inline int pmd_bad(pmd_t pmd)
 {
-	return (pmd_val(pmd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
 
 #define pte_none(x)	(!pte_val((x)))
@@ -193,7 +193,7 @@ static inline int pmd_bad(pmd_t pmd)
  * Level 4 access.
  */
 #define pgd_page_vaddr(pgd)						\
-	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_MASK))
+	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_PFN_MASK))
 #define pgd_page(pgd)		(pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
 #define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
 static inline int pgd_large(pgd_t pgd) { return 0; }
@@ -216,7 +216,7 @@ static inline int pud_large(pud_t pte)
 }
 
 /* PMD  - Level 2 access */
-#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_MASK))
+#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_PFN_MASK))
 #define pmd_page(pmd)		(pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
 
 #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h
index 05e678a8662..7b3835d3b77 100644
--- a/include/asm-x86/xen/page.h
+++ b/include/asm-x86/xen/page.h
@@ -124,7 +124,7 @@ static inline unsigned long mfn_to_local_pfn(unsigned long mfn)
 
 static inline unsigned long pte_mfn(pte_t pte)
 {
-	return (pte.pte & PTE_MASK) >> PAGE_SHIFT;
+	return (pte.pte & PTE_PFN_MASK) >> PAGE_SHIFT;
 }
 
 static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
-- 
cgit v1.2.3


From 77be1fabd024b37423d12f832b1fbdb95dbdf494 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 21 Jul 2008 22:59:56 -0700
Subject: x86: add PTE_FLAGS_MASK

PTE_PFN_MASK was getting lonely, so I made it a friend.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/dump_pagetables.c | 6 +++---
 arch/x86/xen/mmu.c            | 4 ++--
 include/asm-x86/page.h        | 5 ++++-
 include/asm-x86/pgtable.h     | 2 +-
 include/asm-x86/pgtable_32.h  | 2 +-
 5 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index cc174fc412b..a20d1fa64b4 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -221,7 +221,7 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
 	for (i = 0; i < PTRS_PER_PMD; i++) {
 		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
 		if (!pmd_none(*start)) {
-			pgprotval_t prot = pmd_val(*start) & ~PTE_PFN_MASK;
+			pgprotval_t prot = pmd_val(*start) & PTE_FLAGS_MASK;
 
 			if (pmd_large(*start) || !pmd_present(*start))
 				note_page(m, st, __pgprot(prot), 3);
@@ -253,7 +253,7 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
 	for (i = 0; i < PTRS_PER_PUD; i++) {
 		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
 		if (!pud_none(*start)) {
-			pgprotval_t prot = pud_val(*start) & ~PTE_PFN_MASK;
+			pgprotval_t prot = pud_val(*start) & PTE_FLAGS_MASK;
 
 			if (pud_large(*start) || !pud_present(*start))
 				note_page(m, st, __pgprot(prot), 2);
@@ -288,7 +288,7 @@ static void walk_pgd_level(struct seq_file *m)
 	for (i = 0; i < PTRS_PER_PGD; i++) {
 		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
 		if (!pgd_none(*start)) {
-			pgprotval_t prot = pgd_val(*start) & ~PTE_PFN_MASK;
+			pgprotval_t prot = pgd_val(*start) & PTE_FLAGS_MASK;
 
 			if (pgd_large(*start) || !pgd_present(*start))
 				note_page(m, &st, __pgprot(prot), 1);
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 0db6912395e..aa37469da69 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -344,7 +344,7 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
 		unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_PFN_MASK;
+		pteval_t flags = val & PTE_FLAGS_MASK;
 		val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
 	}
 
@@ -355,7 +355,7 @@ static pteval_t pte_pfn_to_mfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
 		unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_PFN_MASK;
+		pteval_t flags = val & PTE_FLAGS_MASK;
 		val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
 	}
 
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index e99fb9fe6f8..6c846228948 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -21,6 +21,9 @@
 /* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
 #define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
 
+/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+#define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
+
 #define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
 #define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
 
@@ -146,7 +149,7 @@ static inline pteval_t native_pte_val(pte_t pte)
 
 static inline pteval_t native_pte_flags(pte_t pte)
 {
-	return native_pte_val(pte) & ~PTE_PFN_MASK;
+	return native_pte_val(pte) & PTE_FLAGS_MASK;
 }
 
 #define pgprot_val(x)	((x).pgprot)
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 2b1746c9237..3e5dbc4195f 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -286,7 +286,7 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 	return __pgprot(preservebits | addbits);
 }
 
-#define pte_pgprot(x) __pgprot(pte_flags(x) & ~PTE_PFN_MASK)
+#define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
 
 #define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
 
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index 525b53e65b4..5c3b26567a9 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -88,7 +88,7 @@ extern unsigned long pg0[];
 /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
 #define pmd_none(x)	(!(unsigned long)pmd_val((x)))
 #define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (~PTE_PFN_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
 
 #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
 
-- 
cgit v1.2.3


From da39ba5e1d65e997a98f6eb93ba6e6eb505f6e3c Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 22 Jul 2008 19:24:25 -0500
Subject: module: don't use stop_machine for waiting rmmod

rmmod has a little-used "-w" option, meaning that instead of failing if the
module is in use, it should block until the module becomes unused.

In this case, we don't need to use stop_machine: Max Krasnyansky
indicated that would be useful for SystemTap which loads/unloads new
modules frequently.

Cc: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 kernel/module.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/kernel/module.c b/kernel/module.c
index 5f80478b746..705e1d5d516 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -639,8 +639,8 @@ static int __try_stop_module(void *_sref)
 {
 	struct stopref *sref = _sref;
 
-	/* If it's not unused, quit unless we are told to block. */
-	if ((sref->flags & O_NONBLOCK) && module_refcount(sref->mod) != 0) {
+	/* If it's not unused, quit unless we're forcing. */
+	if (module_refcount(sref->mod) != 0) {
 		if (!(*sref->forced = try_force_unload(sref->flags)))
 			return -EWOULDBLOCK;
 	}
@@ -652,9 +652,16 @@ static int __try_stop_module(void *_sref)
 
 static int try_stop_module(struct module *mod, int flags, int *forced)
 {
-	struct stopref sref = { mod, flags, forced };
+	if (flags & O_NONBLOCK) {
+		struct stopref sref = { mod, flags, forced };
 
-	return stop_machine_run(__try_stop_module, &sref, NR_CPUS);
+		return stop_machine_run(__try_stop_module, &sref, NR_CPUS);
+	} else {
+		/* We don't need to stop the machine for this. */
+		mod->state = MODULE_STATE_GOING;
+		synchronize_sched();
+		return 0;
+	}
 }
 
 unsigned int module_refcount(struct module *mod)
-- 
cgit v1.2.3


From dafd0940c96fec67974a88ed8e6b8ba3160394cd Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 22 Jul 2008 19:24:25 -0500
Subject: module: generic each_symbol iterator function

Introduce an each_symbol() iterator to avoid duplicating the knowledge
about the 5 different sections containing symbols.  Currently only
used by find_symbol(), but will be used by symbol_put_addr() too.

(Includes NULL ptr deref fix by Jiri Kosina <jkosina@suse.cz>)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jiri Kosina <jkosina@suse.cz>
---
 kernel/module.c | 244 +++++++++++++++++++++++++++++++-------------------------
 1 file changed, 134 insertions(+), 110 deletions(-)

diff --git a/kernel/module.c b/kernel/module.c
index 705e1d5d516..c51c089c666 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -152,156 +152,180 @@ extern const unsigned long __start___kcrctab_unused_gpl[];
 #define symversion(base, idx) ((base != NULL) ? ((base) + (idx)) : NULL)
 #endif
 
-/* lookup symbol in given range of kernel_symbols */
-static const struct kernel_symbol *lookup_symbol(const char *name,
-	const struct kernel_symbol *start,
-	const struct kernel_symbol *stop)
-{
-	const struct kernel_symbol *ks = start;
-	for (; ks < stop; ks++)
-		if (strcmp(ks->name, name) == 0)
-			return ks;
-	return NULL;
-}
-
-static bool always_ok(bool gplok, bool warn, const char *name)
-{
-	return true;
-}
-
-static bool printk_unused_warning(bool gplok, bool warn, const char *name)
-{
-	if (warn) {
-		printk(KERN_WARNING "Symbol %s is marked as UNUSED, "
-		       "however this module is using it.\n", name);
-		printk(KERN_WARNING
-		       "This symbol will go away in the future.\n");
-		printk(KERN_WARNING
-		       "Please evalute if this is the right api to use and if "
-		       "it really is, submit a report the linux kernel "
-		       "mailinglist together with submitting your code for "
-		       "inclusion.\n");
-	}
-	return true;
-}
-
-static bool gpl_only_unused_warning(bool gplok, bool warn, const char *name)
-{
-	if (!gplok)
-		return false;
-	return printk_unused_warning(gplok, warn, name);
-}
-
-static bool gpl_only(bool gplok, bool warn, const char *name)
-{
-	return gplok;
-}
-
-static bool warn_if_not_gpl(bool gplok, bool warn, const char *name)
-{
-	if (!gplok && warn) {
-		printk(KERN_WARNING "Symbol %s is being used "
-		       "by a non-GPL module, which will not "
-		       "be allowed in the future\n", name);
-		printk(KERN_WARNING "Please see the file "
-		       "Documentation/feature-removal-schedule.txt "
-		       "in the kernel source tree for more details.\n");
-	}
-	return true;
-}
-
 struct symsearch {
 	const struct kernel_symbol *start, *stop;
 	const unsigned long *crcs;
-	bool (*check)(bool gplok, bool warn, const char *name);
+	enum {
+		NOT_GPL_ONLY,
+		GPL_ONLY,
+		WILL_BE_GPL_ONLY,
+	} licence;
+	bool unused;
 };
 
-/* Look through this array of symbol tables for a symbol match which
- * passes the check function. */
-static const struct kernel_symbol *search_symarrays(const struct symsearch *arr,
-						    unsigned int num,
-						    const char *name,
-						    bool gplok,
-						    bool warn,
-						    const unsigned long **crc)
+static bool each_symbol_in_section(const struct symsearch *arr,
+				   unsigned int arrsize,
+				   struct module *owner,
+				   bool (*fn)(const struct symsearch *syms,
+					      struct module *owner,
+					      unsigned int symnum, void *data),
+				   void *data)
 {
-	unsigned int i;
-	const struct kernel_symbol *ks;
-
-	for (i = 0; i < num; i++) {
-		ks = lookup_symbol(name, arr[i].start, arr[i].stop);
-		if (!ks || !arr[i].check(gplok, warn, name))
-			continue;
+	unsigned int i, j;
 
-		if (crc)
-			*crc = symversion(arr[i].crcs, ks - arr[i].start);
-		return ks;
+	for (j = 0; j < arrsize; j++) {
+		for (i = 0; i < arr[j].stop - arr[j].start; i++)
+			if (fn(&arr[j], owner, i, data))
+				return true;
 	}
-	return NULL;
+
+	return false;
 }
 
-/* Find a symbol, return value, (optional) crc and (optional) module
- * which owns it */
-static unsigned long find_symbol(const char *name,
-				 struct module **owner,
-				 const unsigned long **crc,
-				 bool gplok,
-				 bool warn)
+/* Returns true as soon as fn returns true, otherwise false. */
+static bool each_symbol(bool (*fn)(const struct symsearch *arr,
+				   struct module *owner,
+				   unsigned int symnum, void *data),
+			void *data)
 {
 	struct module *mod;
-	const struct kernel_symbol *ks;
 	const struct symsearch arr[] = {
 		{ __start___ksymtab, __stop___ksymtab, __start___kcrctab,
-		  always_ok },
+		  NOT_GPL_ONLY, false },
 		{ __start___ksymtab_gpl, __stop___ksymtab_gpl,
-		  __start___kcrctab_gpl, gpl_only },
+		  __start___kcrctab_gpl,
+		  GPL_ONLY, false },
 		{ __start___ksymtab_gpl_future, __stop___ksymtab_gpl_future,
-		  __start___kcrctab_gpl_future, warn_if_not_gpl },
+		  __start___kcrctab_gpl_future,
+		  WILL_BE_GPL_ONLY, false },
 		{ __start___ksymtab_unused, __stop___ksymtab_unused,
-		  __start___kcrctab_unused, printk_unused_warning },
+		  __start___kcrctab_unused,
+		  NOT_GPL_ONLY, true },
 		{ __start___ksymtab_unused_gpl, __stop___ksymtab_unused_gpl,
-		  __start___kcrctab_unused_gpl, gpl_only_unused_warning },
+		  __start___kcrctab_unused_gpl,
+		  GPL_ONLY, true },
 	};
 
-	/* Core kernel first. */
-	ks = search_symarrays(arr, ARRAY_SIZE(arr), name, gplok, warn, crc);
-	if (ks) {
-		if (owner)
-			*owner = NULL;
-		return ks->value;
-	}
+	if (each_symbol_in_section(arr, ARRAY_SIZE(arr), NULL, fn, data))
+		return true;
 
-	/* Now try modules. */
 	list_for_each_entry(mod, &modules, list) {
 		struct symsearch arr[] = {
 			{ mod->syms, mod->syms + mod->num_syms, mod->crcs,
-			  always_ok },
+			  NOT_GPL_ONLY, false },
 			{ mod->gpl_syms, mod->gpl_syms + mod->num_gpl_syms,
-			  mod->gpl_crcs, gpl_only },
+			  mod->gpl_crcs,
+			  GPL_ONLY, false },
 			{ mod->gpl_future_syms,
 			  mod->gpl_future_syms + mod->num_gpl_future_syms,
-			  mod->gpl_future_crcs, warn_if_not_gpl },
+			  mod->gpl_future_crcs,
+			  WILL_BE_GPL_ONLY, false },
 			{ mod->unused_syms,
 			  mod->unused_syms + mod->num_unused_syms,
-			  mod->unused_crcs, printk_unused_warning },
+			  mod->unused_crcs,
+			  NOT_GPL_ONLY, true },
 			{ mod->unused_gpl_syms,
 			  mod->unused_gpl_syms + mod->num_unused_gpl_syms,
-			  mod->unused_gpl_crcs, gpl_only_unused_warning },
+			  mod->unused_gpl_crcs,
+			  GPL_ONLY, true },
 		};
 
-		ks = search_symarrays(arr, ARRAY_SIZE(arr),
-				      name, gplok, warn, crc);
-		if (ks) {
-			if (owner)
-				*owner = mod;
-			return ks->value;
+		if (each_symbol_in_section(arr, ARRAY_SIZE(arr), mod, fn, data))
+			return true;
+	}
+	return false;
+}
+
+struct find_symbol_arg {
+	/* Input */
+	const char *name;
+	bool gplok;
+	bool warn;
+
+	/* Output */
+	struct module *owner;
+	const unsigned long *crc;
+	unsigned long value;
+};
+
+static bool find_symbol_in_section(const struct symsearch *syms,
+				   struct module *owner,
+				   unsigned int symnum, void *data)
+{
+	struct find_symbol_arg *fsa = data;
+
+	if (strcmp(syms->start[symnum].name, fsa->name) != 0)
+		return false;
+
+	if (!fsa->gplok) {
+		if (syms->licence == GPL_ONLY)
+			return false;
+		if (syms->licence == WILL_BE_GPL_ONLY && fsa->warn) {
+			printk(KERN_WARNING "Symbol %s is being used "
+			       "by a non-GPL module, which will not "
+			       "be allowed in the future\n", fsa->name);
+			printk(KERN_WARNING "Please see the file "
+			       "Documentation/feature-removal-schedule.txt "
+			       "in the kernel source tree for more details.\n");
 		}
 	}
 
+	if (syms->unused && fsa->warn) {
+		printk(KERN_WARNING "Symbol %s is marked as UNUSED, "
+		       "however this module is using it.\n", fsa->name);
+		printk(KERN_WARNING
+		       "This symbol will go away in the future.\n");
+		printk(KERN_WARNING
+		       "Please evalute if this is the right api to use and if "
+		       "it really is, submit a report the linux kernel "
+		       "mailinglist together with submitting your code for "
+		       "inclusion.\n");
+	}
+
+	fsa->owner = owner;
+	fsa->crc = symversion(syms->crcs, symnum);
+	fsa->value = syms->start[symnum].value;
+	return true;
+}
+
+/* Find a symbol, return value, (optional) crc and (optional) module
+ * which owns it */
+static unsigned long find_symbol(const char *name,
+				 struct module **owner,
+				 const unsigned long **crc,
+				 bool gplok,
+				 bool warn)
+{
+	struct find_symbol_arg fsa;
+
+	fsa.name = name;
+	fsa.gplok = gplok;
+	fsa.warn = warn;
+
+	if (each_symbol(find_symbol_in_section, &fsa)) {
+		if (owner)
+			*owner = fsa.owner;
+		if (crc)
+			*crc = fsa.crc;
+		return fsa.value;
+	}
+
 	DEBUGP("Failed to find symbol %s\n", name);
 	return -ENOENT;
 }
 
+/* lookup symbol in given range of kernel_symbols */
+static const struct kernel_symbol *lookup_symbol(const char *name,
+	const struct kernel_symbol *start,
+	const struct kernel_symbol *stop)
+{
+	const struct kernel_symbol *ks = start;
+	for (; ks < stop; ks++)
+		if (strcmp(ks->name, name) == 0)
+			return ks;
+	return NULL;
+}
+
 /* Search for module by name: must hold module_mutex. */
 static struct module *find_module(const char *name)
 {
-- 
cgit v1.2.3


From af5406895a05720a879dc33e2f4878fa503e81b3 Mon Sep 17 00:00:00 2001
From: Richard Kennedy <richard@rsk.demon.co.uk>
Date: Tue, 22 Jul 2008 19:24:26 -0500
Subject: module: reorder struct module to save space on 64 bit builds

reorder struct module to save space on 64 bit builds.
saves 1 cacheline_size  (128 on default x86_64 & 64 on AMD
Opteron/athlon) when CONFIG_MODULE_UNLOAD=y.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 include/linux/module.h | 42 ++++++++++++++++++++++--------------------
 1 file changed, 22 insertions(+), 20 deletions(-)

diff --git a/include/linux/module.h b/include/linux/module.h
index 3e03b1acbc9..63f0eb69e21 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -249,27 +249,28 @@ struct module
 
 	/* Exported symbols */
 	const struct kernel_symbol *syms;
-	unsigned int num_syms;
 	const unsigned long *crcs;
+	unsigned int num_syms;
 
 	/* GPL-only exported symbols. */
-	const struct kernel_symbol *gpl_syms;
 	unsigned int num_gpl_syms;
+	const struct kernel_symbol *gpl_syms;
 	const unsigned long *gpl_crcs;
 
 	/* unused exported symbols. */
 	const struct kernel_symbol *unused_syms;
-	unsigned int num_unused_syms;
 	const unsigned long *unused_crcs;
+	unsigned int num_unused_syms;
+
 	/* GPL-only, unused exported symbols. */
-	const struct kernel_symbol *unused_gpl_syms;
 	unsigned int num_unused_gpl_syms;
+	const struct kernel_symbol *unused_gpl_syms;
 	const unsigned long *unused_gpl_crcs;
 
 	/* symbols that will be GPL-only in the near future. */
 	const struct kernel_symbol *gpl_future_syms;
-	unsigned int num_gpl_future_syms;
 	const unsigned long *gpl_future_crcs;
+	unsigned int num_gpl_future_syms;
 
 	/* Exception table */
 	unsigned int num_exentries;
@@ -300,23 +301,9 @@ struct module
 
 #ifdef CONFIG_GENERIC_BUG
 	/* Support for BUG */
+	unsigned num_bugs;
 	struct list_head bug_list;
 	struct bug_entry *bug_table;
-	unsigned num_bugs;
-#endif
-
-#ifdef CONFIG_MODULE_UNLOAD
-	/* Reference counts */
-	struct module_ref ref[NR_CPUS];
-
-	/* What modules depend on me? */
-	struct list_head modules_which_use_me;
-
-	/* Who is waiting for us to be unloaded */
-	struct task_struct *waiter;
-
-	/* Destruction function. */
-	void (*exit)(void);
 #endif
 
 #ifdef CONFIG_KALLSYMS
@@ -342,6 +329,21 @@ struct module
 	struct marker *markers;
 	unsigned int num_markers;
 #endif
+
+#ifdef CONFIG_MODULE_UNLOAD
+	/* What modules depend on me? */
+	struct list_head modules_which_use_me;
+
+	/* Who is waiting for us to be unloaded */
+	struct task_struct *waiter;
+
+	/* Destruction function. */
+	void (*exit)(void);
+
+	/* Reference counts */
+	struct module_ref ref[NR_CPUS];
+#endif
+
 };
 #ifndef MODULE_ARCH_INIT
 #define MODULE_ARCH_INIT {}
-- 
cgit v1.2.3


From f7f5b67557eac1131ba6532522e3c50eced34238 Mon Sep 17 00:00:00 2001
From: Denys Vlasenko <vda.linux@googlemail.com>
Date: Tue, 22 Jul 2008 19:24:26 -0500
Subject: Shrink struct module: CONFIG_UNUSED_SYMBOLS ifdefs

module.c and module.h conatains code for finding
exported symbols which are declared with EXPORT_UNUSED_SYMBOL,
and this code is compiled in even if CONFIG_UNUSED_SYMBOLS is not set
and thus there can be no EXPORT_UNUSED_SYMBOLs in modules anyway
(because EXPORT_UNUSED_SYMBOL(x) are compiled out to nothing then).

This patch adds required #ifdefs.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 include/linux/module.h |  2 ++
 init/Kconfig           |  4 ++--
 kernel/module.c        | 49 ++++++++++++++++++++++++++++++++++---------------
 3 files changed, 38 insertions(+), 17 deletions(-)

diff --git a/include/linux/module.h b/include/linux/module.h
index 63f0eb69e21..a860a2c1f37 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -257,6 +257,7 @@ struct module
 	const struct kernel_symbol *gpl_syms;
 	const unsigned long *gpl_crcs;
 
+#ifdef CONFIG_UNUSED_SYMBOLS
 	/* unused exported symbols. */
 	const struct kernel_symbol *unused_syms;
 	const unsigned long *unused_crcs;
@@ -266,6 +267,7 @@ struct module
 	unsigned int num_unused_gpl_syms;
 	const struct kernel_symbol *unused_gpl_syms;
 	const unsigned long *unused_gpl_crcs;
+#endif
 
 	/* symbols that will be GPL-only in the near future. */
 	const struct kernel_symbol *gpl_future_syms;
diff --git a/init/Kconfig b/init/Kconfig
index 6199d112090..c8578f9ee31 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -856,8 +856,8 @@ config MODULE_UNLOAD
 	help
 	  Without this option you will not be able to unload any
 	  modules (note that some modules may not be unloadable
-	  anyway), which makes your kernel slightly smaller and
-	  simpler.  If unsure, say Y.
+	  anyway), which makes your kernel smaller, faster
+	  and simpler.  If unsure, say Y.
 
 config MODULE_FORCE_UNLOAD
 	bool "Forced module unloading"
diff --git a/kernel/module.c b/kernel/module.c
index c51c089c666..ea9580521eb 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -134,17 +134,19 @@ extern const struct kernel_symbol __start___ksymtab_gpl[];
 extern const struct kernel_symbol __stop___ksymtab_gpl[];
 extern const struct kernel_symbol __start___ksymtab_gpl_future[];
 extern const struct kernel_symbol __stop___ksymtab_gpl_future[];
-extern const struct kernel_symbol __start___ksymtab_unused[];
-extern const struct kernel_symbol __stop___ksymtab_unused[];
-extern const struct kernel_symbol __start___ksymtab_unused_gpl[];
-extern const struct kernel_symbol __stop___ksymtab_unused_gpl[];
 extern const struct kernel_symbol __start___ksymtab_gpl_future[];
 extern const struct kernel_symbol __stop___ksymtab_gpl_future[];
 extern const unsigned long __start___kcrctab[];
 extern const unsigned long __start___kcrctab_gpl[];
 extern const unsigned long __start___kcrctab_gpl_future[];
+#ifdef CONFIG_UNUSED_SYMBOLS
+extern const struct kernel_symbol __start___ksymtab_unused[];
+extern const struct kernel_symbol __stop___ksymtab_unused[];
+extern const struct kernel_symbol __start___ksymtab_unused_gpl[];
+extern const struct kernel_symbol __stop___ksymtab_unused_gpl[];
 extern const unsigned long __start___kcrctab_unused[];
 extern const unsigned long __start___kcrctab_unused_gpl[];
+#endif
 
 #ifndef CONFIG_MODVERSIONS
 #define symversion(base, idx) NULL
@@ -198,12 +200,14 @@ static bool each_symbol(bool (*fn)(const struct symsearch *arr,
 		{ __start___ksymtab_gpl_future, __stop___ksymtab_gpl_future,
 		  __start___kcrctab_gpl_future,
 		  WILL_BE_GPL_ONLY, false },
+#ifdef CONFIG_UNUSED_SYMBOLS
 		{ __start___ksymtab_unused, __stop___ksymtab_unused,
 		  __start___kcrctab_unused,
 		  NOT_GPL_ONLY, true },
 		{ __start___ksymtab_unused_gpl, __stop___ksymtab_unused_gpl,
 		  __start___kcrctab_unused_gpl,
 		  GPL_ONLY, true },
+#endif
 	};
 
 	if (each_symbol_in_section(arr, ARRAY_SIZE(arr), NULL, fn, data))
@@ -220,6 +224,7 @@ static bool each_symbol(bool (*fn)(const struct symsearch *arr,
 			  mod->gpl_future_syms + mod->num_gpl_future_syms,
 			  mod->gpl_future_crcs,
 			  WILL_BE_GPL_ONLY, false },
+#ifdef CONFIG_UNUSED_SYMBOLS
 			{ mod->unused_syms,
 			  mod->unused_syms + mod->num_unused_syms,
 			  mod->unused_crcs,
@@ -228,6 +233,7 @@ static bool each_symbol(bool (*fn)(const struct symsearch *arr,
 			  mod->unused_gpl_syms + mod->num_unused_gpl_syms,
 			  mod->unused_gpl_crcs,
 			  GPL_ONLY, true },
+#endif
 		};
 
 		if (each_symbol_in_section(arr, ARRAY_SIZE(arr), mod, fn, data))
@@ -270,6 +276,7 @@ static bool find_symbol_in_section(const struct symsearch *syms,
 		}
 	}
 
+#ifdef CONFIG_UNUSED_SYMBOLS
 	if (syms->unused && fsa->warn) {
 		printk(KERN_WARNING "Symbol %s is marked as UNUSED, "
 		       "however this module is using it.\n", fsa->name);
@@ -281,6 +288,7 @@ static bool find_symbol_in_section(const struct symsearch *syms,
 		       "mailinglist together with submitting your code for "
 		       "inclusion.\n");
 	}
+#endif
 
 	fsa->owner = owner;
 	fsa->crc = symversion(syms->crcs, symnum);
@@ -1476,8 +1484,10 @@ static int verify_export_symbols(struct module *mod)
 		{ mod->syms, mod->num_syms },
 		{ mod->gpl_syms, mod->num_gpl_syms },
 		{ mod->gpl_future_syms, mod->num_gpl_future_syms },
+#ifdef CONFIG_UNUSED_SYMBOLS
 		{ mod->unused_syms, mod->num_unused_syms },
 		{ mod->unused_gpl_syms, mod->num_unused_gpl_syms },
+#endif
 	};
 
 	for (i = 0; i < ARRAY_SIZE(arr); i++) {
@@ -1795,10 +1805,12 @@ static struct module *load_module(void __user *umod,
 	unsigned int gplfutureindex;
 	unsigned int gplfuturecrcindex;
 	unsigned int unwindex = 0;
+#ifdef CONFIG_UNUSED_SYMBOLS
 	unsigned int unusedindex;
 	unsigned int unusedcrcindex;
 	unsigned int unusedgplindex;
 	unsigned int unusedgplcrcindex;
+#endif
 	unsigned int markersindex;
 	unsigned int markersstringsindex;
 	struct module *mod;
@@ -1881,13 +1893,15 @@ static struct module *load_module(void __user *umod,
 	exportindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab");
 	gplindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_gpl");
 	gplfutureindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_gpl_future");
-	unusedindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_unused");
-	unusedgplindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_unused_gpl");
 	crcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab");
 	gplcrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_gpl");
 	gplfuturecrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_gpl_future");
+#ifdef CONFIG_UNUSED_SYMBOLS
+	unusedindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_unused");
+	unusedgplindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_unused_gpl");
 	unusedcrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_unused");
 	unusedgplcrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_unused_gpl");
+#endif
 	setupindex = find_sec(hdr, sechdrs, secstrings, "__param");
 	exindex = find_sec(hdr, sechdrs, secstrings, "__ex_table");
 	obsparmindex = find_sec(hdr, sechdrs, secstrings, "__obsparm");
@@ -2049,14 +2063,15 @@ static struct module *load_module(void __user *umod,
 		mod->gpl_crcs = (void *)sechdrs[gplcrcindex].sh_addr;
 	mod->num_gpl_future_syms = sechdrs[gplfutureindex].sh_size /
 					sizeof(*mod->gpl_future_syms);
-	mod->num_unused_syms = sechdrs[unusedindex].sh_size /
-					sizeof(*mod->unused_syms);
-	mod->num_unused_gpl_syms = sechdrs[unusedgplindex].sh_size /
-					sizeof(*mod->unused_gpl_syms);
 	mod->gpl_future_syms = (void *)sechdrs[gplfutureindex].sh_addr;
 	if (gplfuturecrcindex)
 		mod->gpl_future_crcs = (void *)sechdrs[gplfuturecrcindex].sh_addr;
 
+#ifdef CONFIG_UNUSED_SYMBOLS
+	mod->num_unused_syms = sechdrs[unusedindex].sh_size /
+					sizeof(*mod->unused_syms);
+	mod->num_unused_gpl_syms = sechdrs[unusedgplindex].sh_size /
+					sizeof(*mod->unused_gpl_syms);
 	mod->unused_syms = (void *)sechdrs[unusedindex].sh_addr;
 	if (unusedcrcindex)
 		mod->unused_crcs = (void *)sechdrs[unusedcrcindex].sh_addr;
@@ -2064,13 +2079,17 @@ static struct module *load_module(void __user *umod,
 	if (unusedgplcrcindex)
 		mod->unused_gpl_crcs
 			= (void *)sechdrs[unusedgplcrcindex].sh_addr;
+#endif
 
 #ifdef CONFIG_MODVERSIONS
-	if ((mod->num_syms && !crcindex) ||
-	    (mod->num_gpl_syms && !gplcrcindex) ||
-	    (mod->num_gpl_future_syms && !gplfuturecrcindex) ||
-	    (mod->num_unused_syms && !unusedcrcindex) ||
-	    (mod->num_unused_gpl_syms && !unusedgplcrcindex)) {
+	if ((mod->num_syms && !crcindex)
+	    || (mod->num_gpl_syms && !gplcrcindex)
+	    || (mod->num_gpl_future_syms && !gplfuturecrcindex)
+#ifdef CONFIG_UNUSED_SYMBOLS
+	    || (mod->num_unused_syms && !unusedcrcindex)
+	    || (mod->num_unused_gpl_syms && !unusedgplcrcindex)
+#endif
+		) {
 		printk(KERN_WARNING "%s: No versions for exported symbols.\n", mod->name);
 		err = try_to_force_load(mod, "nocrc");
 		if (err)
-- 
cgit v1.2.3


From 2f0f2a334bc38b61a9afca951185cd3844ee709d Mon Sep 17 00:00:00 2001
From: Denys Vlasenko <vda.linux@googlemail.com>
Date: Tue, 22 Jul 2008 19:24:27 -0500
Subject: module: turn longs into ints for module sizes

This shrinks module.o and each *.ko file.

And finally, structure members which hold length of module
code (four such members there) and count of symbols
are converted from longs to ints.

We cannot possibly have a module where 32 bits won't
be enough to hold such counts.

For one, module loading checks module size for sanity
before loading, so such insanely big module will fail
that test first.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 include/linux/module.h | 6 +++---
 kernel/module.c        | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/linux/module.h b/include/linux/module.h
index a860a2c1f37..fce15ebd0e1 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -288,10 +288,10 @@ struct module
 	void *module_core;
 
 	/* Here are the sizes of the init and core sections */
-	unsigned long init_size, core_size;
+	unsigned int init_size, core_size;
 
 	/* The size of the executable code in each section.  */
-	unsigned long init_text_size, core_text_size;
+	unsigned int init_text_size, core_text_size;
 
 	/* The handle returned from unwind_add_table. */
 	void *unwind_info;
@@ -311,7 +311,7 @@ struct module
 #ifdef CONFIG_KALLSYMS
 	/* We keep the symbol and string tables for kallsyms. */
 	Elf_Sym *symtab;
-	unsigned long num_symtab;
+	unsigned int num_symtab;
 	char *strtab;
 
 	/* Section attributes */
diff --git a/kernel/module.c b/kernel/module.c
index ea9580521eb..5c7eb0695b3 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1567,7 +1567,7 @@ static int simplify_symbols(Elf_Shdr *sechdrs,
 }
 
 /* Update size with this section: return offset. */
-static long get_offset(unsigned long *size, Elf_Shdr *sechdr)
+static long get_offset(unsigned int *size, Elf_Shdr *sechdr)
 {
 	long ret;
 
@@ -2562,7 +2562,7 @@ static int m_show(struct seq_file *m, void *p)
 	struct module *mod = list_entry(p, struct module, list);
 	char buf[8];
 
-	seq_printf(m, "%s %lu",
+	seq_printf(m, "%s %u",
 		   mod->name, mod->init_size + mod->core_size);
 	print_unload_info(m, mod);
 
-- 
cgit v1.2.3


From 3a642e99babe0617febb6f402e1e063479f489db Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 22 Jul 2008 19:24:28 -0500
Subject: modules: Take a shortcut for checking if an address is in a module

This patch keeps track of the boundaries of module allocation, in
order to speed up module_text_address().

Inspired by Arjan's version, which required arch-specific defines:

	Various pieces of the kernel (lockdep, latencytop, etc) tend
	to store backtraces, sometimes at a relatively high
	frequency. In itself this isn't a big performance deal (after
	all you're using diagnostics features), but there have been
	some complaints from people who have over 100 modules loaded
	that this is a tad too slow.

	This is due to the new backtracer code which looks at every
	slot on the stack to see if it's a kernel/module text address,
	so that's 1024 slots.  1024 times 100 modules... that's a lot
	of list walking.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 kernel/module.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/kernel/module.c b/kernel/module.c
index 5c7eb0695b3..d8b5605132a 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -70,6 +70,9 @@ static DECLARE_WAIT_QUEUE_HEAD(module_wq);
 
 static BLOCKING_NOTIFIER_HEAD(module_notify_list);
 
+/* Bounds of module allocation, for speeding __module_text_address */
+static unsigned long module_addr_min = -1UL, module_addr_max = 0;
+
 int register_module_notifier(struct notifier_block * nb)
 {
 	return blocking_notifier_chain_register(&module_notify_list, nb);
@@ -1779,6 +1782,20 @@ static inline void add_kallsyms(struct module *mod,
 }
 #endif /* CONFIG_KALLSYMS */
 
+static void *module_alloc_update_bounds(unsigned long size)
+{
+	void *ret = module_alloc(size);
+
+	if (ret) {
+		/* Update module bounds. */
+		if ((unsigned long)ret < module_addr_min)
+			module_addr_min = (unsigned long)ret;
+		if ((unsigned long)ret + size > module_addr_max)
+			module_addr_max = (unsigned long)ret + size;
+	}
+	return ret;
+}
+
 /* Allocate and load the module: note that size of section 0 is always
    zero, and we rely on this for optional sections. */
 static struct module *load_module(void __user *umod,
@@ -1980,7 +1997,7 @@ static struct module *load_module(void __user *umod,
 	layout_sections(mod, hdr, sechdrs, secstrings);
 
 	/* Do the allocs. */
-	ptr = module_alloc(mod->core_size);
+	ptr = module_alloc_update_bounds(mod->core_size);
 	if (!ptr) {
 		err = -ENOMEM;
 		goto free_percpu;
@@ -1988,7 +2005,7 @@ static struct module *load_module(void __user *umod,
 	memset(ptr, 0, mod->core_size);
 	mod->module_core = ptr;
 
-	ptr = module_alloc(mod->init_size);
+	ptr = module_alloc_update_bounds(mod->init_size);
 	if (!ptr && mod->init_size) {
 		err = -ENOMEM;
 		goto free_core;
@@ -2645,6 +2662,9 @@ struct module *__module_text_address(unsigned long addr)
 {
 	struct module *mod;
 
+	if (addr < module_addr_min || addr > module_addr_max)
+		return NULL;
+
 	list_for_each_entry(mod, &modules, list)
 		if (within(addr, mod->module_init, mod->init_text_size)
 		    || within(addr, mod->module_core, mod->core_text_size))
-- 
cgit v1.2.3


From baabaae98125fbd1a8dc258aa95333c01cd9e206 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Tue, 8 Jul 2008 19:00:16 +0200
Subject: make CONFIG_KMOD invisible

... as preparation for removing it completely, make it an
invisible bool defaulting to yes.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 init/Kconfig | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/init/Kconfig b/init/Kconfig
index c8578f9ee31..a50bdfed2df 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -893,16 +893,11 @@ config MODULE_SRCVERSION_ALL
 	  will be created for all modules.  If unsure, say N.
 
 config KMOD
-	bool "Automatic kernel module loading"
+	def_bool y
 	depends on MODULES
 	help
-	  Normally when you have selected some parts of the kernel to
-	  be created as kernel modules, you must load them (using the
-	  "modprobe" command) before you can use them. If you say Y
-	  here, some parts of the kernel will be able to load modules
-	  automatically: when a part of the kernel needs a module, it
-	  runs modprobe with the appropriate arguments, thereby
-	  loading the module if it is available.  If unsure, say Y.
+	  This is being removed soon.  These days, CONFIG_MODULES
+	  implies CONFIG_KMOD, so use that instead.
 
 config STOP_MACHINE
 	bool
-- 
cgit v1.2.3


From a81792f668c20540c336af4242ba1400763eb14f Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Tue, 8 Jul 2008 19:00:25 +0200
Subject: remove mention of CONFIG_KMOD from documentation

Also includes a few Kconfig files (xtensa, blackfin)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
---
 Documentation/filesystems/bfs.txt                     | 10 +++++-----
 Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl |  2 +-
 Documentation/telephony/ixj.txt                       | 13 +++----------
 Documentation/video4linux/w9968cf.txt                 |  3 ---
 arch/blackfin/Kconfig                                 |  4 ++--
 arch/xtensa/Kconfig                                   |  4 ++--
 6 files changed, 13 insertions(+), 23 deletions(-)

diff --git a/Documentation/filesystems/bfs.txt b/Documentation/filesystems/bfs.txt
index ea825e178e7..78043d5a8fc 100644
--- a/Documentation/filesystems/bfs.txt
+++ b/Documentation/filesystems/bfs.txt
@@ -26,11 +26,11 @@ You can simplify mounting by just typing:
 
 this will allocate the first available loopback device (and load loop.o 
 kernel module if necessary) automatically. If the loopback driver is not
-loaded automatically, make sure that your kernel is compiled with kmod 
-support (CONFIG_KMOD) enabled. Beware that umount will not
-deallocate /dev/loopN device if /etc/mtab file on your system is a
-symbolic link to /proc/mounts. You will need to do it manually using
-"-d" switch of losetup(8). Read losetup(8) manpage for more info.
+loaded automatically, make sure that you have compiled the module and
+that modprobe is functioning. Beware that umount will not deallocate
+/dev/loopN device if /etc/mtab file on your system is a symbolic link to
+/proc/mounts. You will need to do it manually using "-d" switch of
+losetup(8). Read losetup(8) manpage for more info.
 
 To create the BFS image under UnixWare you need to find out first which
 slice contains it. The command prtvtoc(1M) is your friend:
diff --git a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl
index c4d2e3507af..9d644f7e241 100644
--- a/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl
+++ b/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl
@@ -42,7 +42,7 @@
      <sect1><title>Device Components</title>
 !Esound/core/device.c
      </sect1>
-     <sect1><title>KMOD and Device File Entries</title>
+     <sect1><title>Module requests and Device File Entries</title>
 !Esound/core/sound.c
      </sect1>
      <sect1><title>Memory Management Helpers</title>
diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt
index 621024fd3a1..44d124005ba 100644
--- a/Documentation/telephony/ixj.txt
+++ b/Documentation/telephony/ixj.txt
@@ -305,21 +305,14 @@ driver, like this:
 
 which will result in the needed drivers getting loaded automatically.
 
-   g.  if you are planning on using kerneld to automatically load the 
-module for you, then you need to edit /etc/conf.modules and add the 
+   g.  if you are planning on having the kernel automatically request
+the module for you, then you need to edit /etc/conf.modules and add the
 following lines:
 
 	options ixj dspio=0x340 xio=0x330 ixjdebug=0
 
 If you do this, then when you execute an application that uses the
-module kerneld will load the module for you.  Note that to do this,
-you need to have your kernel set to support kerneld.  You can check
-for this by looking at /usr/src/linux/.config and you should see this:
-
-	# Loadable module support
-	#
-	<snip>
-	CONFIG_KMOD=y
+module the kernel will request that it is loaded.
 
   h.  if you want non-root users to be able to read and write to the 
 ixj devices (this is a good idea!) you should do the following:
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt
index e0bba8393c7..05138e8aea0 100644
--- a/Documentation/video4linux/w9968cf.txt
+++ b/Documentation/video4linux/w9968cf.txt
@@ -193,9 +193,6 @@ Description:     Automatic 'ovcamchip' module loading: 0 disabled, 1 enabled.
 		 loads that module automatically. This action is performed as
 		 once soon as the 'w9968cf' module is loaded into memory.
 Default:         1
-Note:            The kernel must be compiled with the CONFIG_KMOD option
-		 enabled for the 'ovcamchip' module to be loaded and for
-		 this parameter to be present.
 -------------------------------------------------------------------------------
 Name:           simcams
 Type:           int
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b87634e75f2..b83b8ef84e9 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -873,8 +873,8 @@ config HOTPLUG
 	  plugged into slots found on all modern laptop computers.  Another
 	  example, used on modern desktops as well as laptops, is USB.
 
-	  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-	  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+	  Enable HOTPLUG and build a modular kernel.  Get agent software
+	  (from <http://linux-hotplug.sourceforge.net/>) and install it.
 	  Then your kernel will automatically call out to a user mode "policy
 	  agent" (/sbin/hotplug) to load modules and set up software needed
 	  to use devices as you hotplug them.
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 9fc8551a1cf..02e417d3d8e 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -194,8 +194,8 @@ config HOTPLUG
 	plugged into slots found on all modern laptop computers.  Another
 	example, used on modern desktops as well as laptops, is USB.
 
-	Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-	software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+	Enable HOTPLUG and build a modular kernel.  Get agent software
+	(from <http://linux-hotplug.sourceforge.net/>) and install it.
 	Then your kernel will automatically call out to a user mode "policy
 	agent" (/sbin/hotplug) to load modules and set up software needed
 	to use devices as you hotplug them.
-- 
cgit v1.2.3


From df648c9fbebb4de50e7a6e76cc253c7cb0421f9b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Tue, 8 Jul 2008 19:00:18 +0200
Subject: rework try_then_request_module to do less in non-modular kernels

This reworks try_then_request_module to only invoke the "lookup"
function "x" once when the kernel is not modular.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 include/linux/kmod.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 5dc13848891..9bdb28d6660 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -29,11 +29,12 @@
 /* modprobe exit status on success, -ve on error.  Return value
  * usually useless though. */
 extern int request_module(const char * name, ...) __attribute__ ((format (printf, 1, 2)));
+#define try_then_request_module(x, mod...) ((x) ?: (request_module(mod), (x)))
 #else
 static inline int request_module(const char * name, ...) { return -ENOSYS; }
+#define try_then_request_module(x, mod...) (x)
 #endif
 
-#define try_then_request_module(x, mod...) ((x) ?: (request_module(mod), (x)))
 
 struct key;
 struct file;
-- 
cgit v1.2.3


From 184b6c7682e484032e3f845eef5db26e72681d6f Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Tue, 8 Jul 2008 19:00:20 +0200
Subject: remove CONFIG_KMOD from sparc64

One place is just a comment, the other a conditional, unused
inclusion of linux/kmod.h.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/sparc64/kernel/process.c | 6 +++---
 arch/sparc64/kernel/traps.c   | 3 ---
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index c1f1ff29e97..31ea752d307 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -683,9 +683,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 		  ((unsigned long) child_sf) - STACK_BIAS;
 
 		/* Special case, if we are spawning a kernel thread from
-		 * a userspace task (via KMOD, NFS, or similar) we must
-		 * disable performance counters in the child because the
-		 * address space and protection realm are changing.
+		 * a userspace task (usermode helper, NFS or similar), we
+		 * must disable performance counters in the child because
+		 * the address space and protection realm are changing.
 		 */
 		if (t->flags & _TIF_PERFCTR) {
 			t->user_cntd0 = t->user_cntd1 = NULL;
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 0aa819c29db..bd30ecba563 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -36,9 +36,6 @@
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/head.h>
-#ifdef CONFIG_KMOD
-#include <linux/kmod.h>
-#endif
 #include <asm/prom.h>
 
 #include "entry.h"
-- 
cgit v1.2.3


From a00caa1fa954c734f4214a074727a329a9ba6568 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Tue, 8 Jul 2008 19:00:24 +0200
Subject: remove CONFIG_KMOD from lib

textsearch algorithms can be loaded, make the code depend
on CONFIG_MODULES instead of CONFIG_KMOD.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 lib/textsearch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/textsearch.c b/lib/textsearch.c
index 4b7c6075256..9fbcb44c554 100644
--- a/lib/textsearch.c
+++ b/lib/textsearch.c
@@ -267,7 +267,7 @@ struct ts_config *textsearch_prepare(const char *algo, const void *pattern,
 		return ERR_PTR(-EINVAL);
 
 	ops = lookup_ts_algo(algo);
-#ifdef CONFIG_KMOD
+#ifdef CONFIG_MODULES
 	/*
 	 * Why not always autoload you may ask. Some users are
 	 * in a situation where requesting a module may deadlock,
-- 
cgit v1.2.3


From a1ef5adb4cad43460ebba23c5a78cf4a55bb6a5b Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Tue, 8 Jul 2008 19:00:17 +0200
Subject: remove CONFIG_KMOD from core kernel code

Always compile request_module when the kernel allows modules.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 include/linux/kmod.h | 2 +-
 kernel/exec_domain.c | 2 +-
 kernel/kmod.c        | 2 +-
 kernel/sysctl.c      | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 9bdb28d6660..0509c4ce485 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -25,7 +25,7 @@
 
 #define KMOD_PATH_LEN 256
 
-#ifdef CONFIG_KMOD
+#ifdef CONFIG_MODULES
 /* modprobe exit status on success, -ve on error.  Return value
  * usually useless though. */
 extern int request_module(const char * name, ...) __attribute__ ((format (printf, 1, 2)));
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index a9e6bad9f70..c1ef192aa65 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -65,7 +65,7 @@ lookup_exec_domain(u_long personality)
 				goto out;
 	}
 
-#ifdef CONFIG_KMOD
+#ifdef CONFIG_MODULES
 	read_unlock(&exec_domains_lock);
 	request_module("personality-%ld", pers);
 	read_lock(&exec_domains_lock);
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 8df97d3dfda..90d7af1c165 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -42,7 +42,7 @@ extern int max_threads;
 
 static struct workqueue_struct *khelper_wq;
 
-#ifdef CONFIG_KMOD
+#ifdef CONFIG_MODULES
 
 /*
 	modprobe_path is set via /proc/sys.
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 6b16e16428d..b859e6b5a76 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -110,7 +110,7 @@ static int min_percpu_pagelist_fract = 8;
 
 static int ngroups_max = NGROUPS_MAX;
 
-#ifdef CONFIG_KMOD
+#ifdef CONFIG_MODULES
 extern char modprobe_path[];
 #endif
 #ifdef CONFIG_CHR_DEV_SG
@@ -475,7 +475,7 @@ static struct ctl_table kern_table[] = {
 		.proc_handler	= &ftrace_enable_sysctl,
 	},
 #endif
-#ifdef CONFIG_KMOD
+#ifdef CONFIG_MODULES
 	{
 		.ctl_name	= KERN_MODPROBE,
 		.procname	= "modprobe",
-- 
cgit v1.2.3


From d536b1f86591fb081c7a56eab04e711eb4dab951 Mon Sep 17 00:00:00 2001
From: Jan Kratochvil <jan.kratochvil@redhat.com>
Date: Tue, 22 Jul 2008 14:00:47 +0200
Subject: x86: fix crash due to missing debugctlmsr on AMD K6-3

currently if you use PTRACE_SINGLEBLOCK on AMD K6-3 (i586) it will crash.
Kernel now wrongly assumes existing DEBUGCTLMSR MSR register there.

Removed the assumption also for some other non-K6 CPUs but I am not sure there
(but it can only bring small inefficiency there if my assumption is wrong).

Based on info from Roland McGrath, Chuck Ebbert and Mikulas Patocka.
More info at:
	https://bugzilla.redhat.com/show_bug.cgi?id=456175

Signed-off-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig.cpu | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 54b8c02c71e..2c518fbc52e 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -414,4 +414,4 @@ config X86_MINIMUM_CPU_FAMILY
 
 config X86_DEBUGCTLMSR
 	def_bool y
-	depends on !(M586MMX || M586TSC || M586 || M486 || M386)
+	depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
-- 
cgit v1.2.3


From 04e1e0cccade330ab3715ce59234f7e3b087e246 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Tue, 22 Jul 2008 13:04:18 +0000
Subject: [CIFS] Fix compiler warning on 64-bit

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/asn1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index f58e41d3ba4..42765465701 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -400,7 +400,7 @@ asn1_oid_decode(struct asn1_ctx *ctx,
 	size = eoc - ctx->pointer + 1;
 
 	/* first subid actually encodes first two subids */
-	if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+	if (size < 2 || size > UINT_MAX/sizeof(unsigned long))
 		return 0;
 
 	*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
-- 
cgit v1.2.3


From 651910874633a75f4a726d44e449be0a56b4b2e0 Mon Sep 17 00:00:00 2001
From: John Reiser <jreiser@BitWagon.com>
Date: Mon, 21 Jul 2008 14:21:32 -0700
Subject: execve filename: document and export via auxiliary vector

The Linux kernel puts the filename argument of execve() into the new
address space.  Many developers are surprised to learn this.  Those who
know and could use it, object "But it's not documented."

Those who want to use it dislike the expression
  (char *)(1+ strlen(env[-1+ n_env]) + env[-1+ n_env])
because it requires locating the last original environment variable,
and assumes that the filename follows the characters.

This patch documents the insertion of the filename, and makes it easier
to find by adding a new tag AT_EXECFN in the ElfXX_auxv_t; see <elf.h>.

In many cases readlink("/proc/self/exe",) gives the same answer.  But if
all the original pages get unmapped, then the kernel erases the symlink
for /proc/self/exe.  This can happen when a program decompressor does a
good job of cleaning up after uncompressing directly to memory, so that
the address space of the target program looks the same as if compression
had never happened.  One example is http://upx.sourceforge.net .

One notable use of the underlying concept (what path containED the
executable) is glibc expanding $ORIGIN in DT_RUNPATH.  In practice for
the near term, it may be a good idea for user-mode code to use both
/proc/self/exe and AT_EXECFN as fall-back methods for each other.
/proc/self/exe can fail due to unmapping, AT_EXECFN can fail because it
won't be present on non-new systems.  The auxvec or {AT_EXECFN}.d_val
also can get overwritten, although in nearly all cases this would be the
result of a bug.

The runtime cost is one NEW_AUX_ENT using two words of stack space.  The
underlying value is maintained already as bprm->exec; setup_arg_pages()
in fs/exec.c slides it for stack_shift, etc.

Signed-off-by: John Reiser <jreiser@BitWagon.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/binfmt_elf.c        | 1 +
 include/linux/auxvec.h | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index d48ff5f370f..639d2d8b571 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -204,6 +204,7 @@ create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
 	NEW_AUX_ENT(AT_GID, tsk->gid);
 	NEW_AUX_ENT(AT_EGID, tsk->egid);
  	NEW_AUX_ENT(AT_SECURE, security_bprm_secureexec(bprm));
+	NEW_AUX_ENT(AT_EXECFN, bprm->exec);
 	if (k_platform) {
 		NEW_AUX_ENT(AT_PLATFORM,
 			    (elf_addr_t)(unsigned long)u_platform);
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
index ad895455ab7..0da17d14fd1 100644
--- a/include/linux/auxvec.h
+++ b/include/linux/auxvec.h
@@ -26,8 +26,10 @@
 
 #define AT_SECURE 23   /* secure mode boolean */
 
+#define AT_EXECFN  31	/* filename of program */
 #ifdef __KERNEL__
-#define AT_VECTOR_SIZE_BASE (14 + 2) /* NEW_AUX_ENT entries in auxiliary table */
+#define AT_VECTOR_SIZE_BASE 17 /* NEW_AUX_ENT entries in auxiliary table */
+  /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
 #endif
 
 #endif /* _LINUX_AUXVEC_H */
-- 
cgit v1.2.3


From 0c36ec31473593aa937ff04f3b3b630e81512734 Mon Sep 17 00:00:00 2001
From: Juergen Beisert <j.beisert@pengutronix.de>
Date: Mon, 21 Jul 2008 14:21:34 -0700
Subject: gpio: gpio driver for max7301 SPI GPIO expander

Maxim's MAX7301 is an SPI GPIO expander with 28 GPIOs.  Note: MAX7301's
interrupt feature is not supported yet.

[akpm@linux-foundation.org: coding-style fixes]
[g.liakhovetski@pengutronix.de: Fix inaccuracies in comments, check spi_setup()
return code, mask off high byte in max7301_read()]
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/gpio/Kconfig        |   6 +
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/max7301.c      | 339 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/spi/max7301.h |   9 ++
 4 files changed, 355 insertions(+)
 create mode 100644 drivers/gpio/max7301.c
 create mode 100644 include/linux/spi/max7301.h

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 008c38ba774..9e0c4fbfc51 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -69,6 +69,12 @@ config GPIO_PCF857X
 
 comment "SPI GPIO expanders:"
 
+config GPIO_MAX7301
+	tristate "Maxim MAX7301 GPIO expander"
+	depends on SPI_MASTER
+	help
+	  gpio driver for Maxim MAX7301 SPI GPIO expander.
+
 config GPIO_MCP23S08
 	tristate "Microchip MCP23S08 I/O expander"
 	depends on SPI_MASTER
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fdde9923cf3..16e796dc541 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -4,6 +4,7 @@ ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 
 obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpiolib.o
 
+obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
diff --git a/drivers/gpio/max7301.c b/drivers/gpio/max7301.c
new file mode 100644
index 00000000000..39c795ad831
--- /dev/null
+++ b/drivers/gpio/max7301.c
@@ -0,0 +1,339 @@
+/**
+ * drivers/gpio/max7301.c
+ *
+ * Copyright (C) 2006 Juergen Beisert, Pengutronix
+ * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The Maxim's MAX7301 device is an SPI driven GPIO expander. There are
+ * 28 GPIOs. 8 of them can trigger an interrupt. See datasheet for more
+ * details
+ * Note:
+ * - DIN must be stable at the rising edge of clock.
+ * - when writing:
+ *   - always clock in 16 clocks at once
+ *   - at DIN: D15 first, D0 last
+ *   - D0..D7 = databyte, D8..D14 = commandbyte
+ *   - D15 = low -> write command
+ * - when reading
+ *   - always clock in 16 clocks at once
+ *   - at DIN: D15 first, D0 last
+ *   - D0..D7 = dummy, D8..D14 = register address
+ *   - D15 = high -> read command
+ *   - raise CS and assert it again
+ *   - always clock in 16 clocks at once
+ *   - at DOUT: D15 first, D0 last
+ *   - D0..D7 contains the data from the first cycle
+ *
+ * The driver exports a standard gpiochip interface
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
+#include <linux/gpio.h>
+
+#define DRIVER_NAME "max7301"
+
+/*
+ * Pin configurations, see MAX7301 datasheet page 6
+ */
+#define PIN_CONFIG_MASK 0x03
+#define PIN_CONFIG_IN_PULLUP 0x03
+#define PIN_CONFIG_IN_WO_PULLUP 0x02
+#define PIN_CONFIG_OUT 0x01
+
+#define PIN_NUMBER 28
+
+
+/*
+ * Some registers must be read back to modify.
+ * To save time we cache them here in memory
+ */
+struct max7301 {
+	struct mutex	lock;
+	u8		port_config[8];	/* field 0 is unused */
+	u32		out_level;	/* cached output levels */
+	struct gpio_chip chip;
+	struct spi_device *spi;
+};
+
+/**
+ * max7301_write - Write a new register content
+ * @spi: The SPI device
+ * @reg: Register offset
+ * @val: Value to write
+ *
+ * A write to the MAX7301 means one message with one transfer
+ *
+ * Returns 0 if successful or a negative value on error
+ */
+static int max7301_write(struct spi_device *spi, unsigned int reg, unsigned int val)
+{
+	u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
+	return spi_write(spi, (const u8 *)&word, sizeof(word));
+}
+
+/**
+ * max7301_read - Read back register content
+ * @spi: The SPI device
+ * @reg: Register offset
+ *
+ * A read from the MAX7301 means two transfers; here, one message each
+ *
+ * Returns positive 8 bit value from device if successful or a
+ * negative value on error
+ */
+static int max7301_read(struct spi_device *spi, unsigned int reg)
+{
+	int ret;
+	u16 word;
+
+	word = 0x8000 | (reg << 8);
+	ret = spi_write(spi, (const u8 *)&word, sizeof(word));
+	if (ret)
+		return ret;
+	/*
+	 * This relies on the fact, that a transfer with NULL tx_buf shifts out
+	 * zero bytes (=NOOP for MAX7301)
+	 */
+	ret = spi_read(spi, (u8 *)&word, sizeof(word));
+	if (ret)
+		return ret;
+	return word & 0xff;
+}
+
+static int max7301_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+	u8 *config;
+	int ret;
+
+	/* First 4 pins are unused in the controller */
+	offset += 4;
+
+	config = &ts->port_config[offset >> 2];
+
+	mutex_lock(&ts->lock);
+
+	/* Standard GPIO API doesn't support pull-ups, has to be extended.
+	 * Hard-coding no pollup for now. */
+	*config = (*config & ~(3 << (offset & 3))) | (1 << (offset & 3));
+
+	ret = max7301_write(ts->spi, 0x08 + (offset >> 2), *config);
+
+	mutex_unlock(&ts->lock);
+
+	return ret;
+}
+
+static int __max7301_set(struct max7301 *ts, unsigned offset, int value)
+{
+	if (value) {
+		ts->out_level |= 1 << offset;
+		return max7301_write(ts->spi, 0x20 + offset, 0x01);
+	} else {
+		ts->out_level &= ~(1 << offset);
+		return max7301_write(ts->spi, 0x20 + offset, 0x00);
+	}
+}
+
+static int max7301_direction_output(struct gpio_chip *chip, unsigned offset,
+				    int value)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+	u8 *config;
+	int ret;
+
+	/* First 4 pins are unused in the controller */
+	offset += 4;
+
+	config = &ts->port_config[offset >> 2];
+
+	mutex_lock(&ts->lock);
+
+	*config = (*config & ~(3 << (offset & 3))) | (1 << (offset & 3));
+
+	ret = __max7301_set(ts, offset, value);
+
+	if (!ret)
+		ret = max7301_write(ts->spi, 0x08 + (offset >> 2), *config);
+
+	mutex_unlock(&ts->lock);
+
+	return ret;
+}
+
+static int max7301_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+	int config, level = -EINVAL;
+
+	/* First 4 pins are unused in the controller */
+	offset += 4;
+
+	mutex_lock(&ts->lock);
+
+	config = (ts->port_config[offset >> 2] >> ((offset & 3) * 2)) & 3;
+
+	switch (config) {
+	case 1:
+		/* Output: return cached level */
+		level =  !!(ts->out_level & (1 << offset));
+		break;
+	case 2:
+	case 3:
+		/* Input: read out */
+		level = max7301_read(ts->spi, 0x20 + offset) & 0x01;
+	}
+	mutex_unlock(&ts->lock);
+
+	return level;
+}
+
+static void max7301_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+
+	/* First 4 pins are unused in the controller */
+	offset += 4;
+
+	mutex_lock(&ts->lock);
+
+	__max7301_set(ts, offset, value);
+
+	mutex_unlock(&ts->lock);
+}
+
+static int __devinit max7301_probe(struct spi_device *spi)
+{
+	struct max7301 *ts;
+	struct max7301_platform_data *pdata;
+	int i, ret;
+
+	pdata = spi->dev.platform_data;
+	if (!pdata || !pdata->base)
+		return -ENODEV;
+
+	/*
+	 * bits_per_word cannot be configured in platform data
+	 */
+	spi->bits_per_word = 16;
+
+	ret = spi_setup(spi);
+	if (ret < 0)
+		return ret;
+
+	ts = kzalloc(sizeof(struct max7301), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	mutex_init(&ts->lock);
+
+	dev_set_drvdata(&spi->dev, ts);
+
+	/* Power up the chip and disable IRQ output */
+	max7301_write(spi, 0x04, 0x01);
+
+	ts->spi = spi;
+
+	ts->chip.label = DRIVER_NAME,
+
+	ts->chip.direction_input = max7301_direction_input;
+	ts->chip.get = max7301_get;
+	ts->chip.direction_output = max7301_direction_output;
+	ts->chip.set = max7301_set;
+
+	ts->chip.base = pdata->base;
+	ts->chip.ngpio = PIN_NUMBER;
+	ts->chip.can_sleep = 1;
+	ts->chip.dev = &spi->dev;
+	ts->chip.owner = THIS_MODULE;
+
+	ret = gpiochip_add(&ts->chip);
+	if (ret)
+		goto exit_destroy;
+
+	/*
+	 * tristate all pins in hardware and cache the
+	 * register values for later use.
+	 */
+	for (i = 1; i < 8; i++) {
+		int j;
+		/* 0xAA means input with internal pullup disabled */
+		max7301_write(spi, 0x08 + i, 0xAA);
+		ts->port_config[i] = 0xAA;
+		for (j = 0; j < 4; j++) {
+			int idx = ts->chip.base + (i - 1) * 4 + j;
+			ret = gpio_direction_input(idx);
+			if (ret)
+				goto exit_remove;
+			gpio_free(idx);
+		}
+	}
+	return ret;
+
+exit_remove:
+	gpiochip_remove(&ts->chip);
+exit_destroy:
+	dev_set_drvdata(&spi->dev, NULL);
+	mutex_destroy(&ts->lock);
+	kfree(ts);
+	return ret;
+}
+
+static int max7301_remove(struct spi_device *spi)
+{
+	struct max7301 *ts;
+	int ret;
+
+	ts = dev_get_drvdata(&spi->dev);
+	if (ts == NULL)
+		return -ENODEV;
+
+	dev_set_drvdata(&spi->dev, NULL);
+
+	/* Power down the chip and disable IRQ output */
+	max7301_write(spi, 0x04, 0x00);
+
+	ret = gpiochip_remove(&ts->chip);
+	if (!ret) {
+		mutex_destroy(&ts->lock);
+		kfree(ts);
+	} else
+		dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
+			ret);
+
+	return ret;
+}
+
+static struct spi_driver max7301_driver = {
+	.driver = {
+		.name		= DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	},
+	.probe		= max7301_probe,
+	.remove		= __devexit_p(max7301_remove),
+};
+
+static int __init max7301_init(void)
+{
+	return spi_register_driver(&max7301_driver);
+}
+
+static void __exit max7301_exit(void)
+{
+	spi_unregister_driver(&max7301_driver);
+}
+
+module_init(max7301_init);
+module_exit(max7301_exit);
+
+MODULE_AUTHOR("Juergen Beisert");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX7301 SPI based GPIO-Expander");
diff --git a/include/linux/spi/max7301.h b/include/linux/spi/max7301.h
new file mode 100644
index 00000000000..6dfd83f19b4
--- /dev/null
+++ b/include/linux/spi/max7301.h
@@ -0,0 +1,9 @@
+#ifndef LINUX_SPI_MAX7301_H
+#define LINUX_SPI_MAX7301_H
+
+struct max7301_platform_data {
+	/* number assigned to the first GPIO */
+	unsigned	base;
+};
+
+#endif
-- 
cgit v1.2.3


From 1673ad52bd9a3c747e596a76e65c55981ea651e3 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Mon, 21 Jul 2008 14:21:34 -0700
Subject: gpio: pcf857x: add lock and handle more chips

Two small updates to the pcf857x driver: (a) the max732[89] chips are
also second sources for the pcf8574/a, and (b) add a mutex to prevent
trashing the cached state.  Adding the lock is effectively a bugfix,
although it seems unlikely that anyone would have run into the issue it
protects against.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/gpio/Kconfig   |  5 +++--
 drivers/gpio/pcf857x.c | 33 +++++++++++++++++++++++++++++----
 2 files changed, 32 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 9e0c4fbfc51..fced1909cbb 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -45,7 +45,7 @@ config GPIO_PCA953X
 	  will be called pca953x.
 
 config GPIO_PCF857X
-	tristate "PCF857x, PCA857x, and PCA967x I2C GPIO expanders"
+	tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
 	depends on I2C
 	help
 	  Say yes here to provide access to most "quasi-bidirectional" I2C
@@ -54,7 +54,8 @@ config GPIO_PCF857X
 	  some of them.  Compatible models include:
 
 	  8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
-	            pca9670, pca9672, pca9674, pca9674a
+	            pca9670, pca9672, pca9674, pca9674a,
+	  	    max7328, max7329
 
 	  16 bits:  pcf8575, pcf8575c, pca8575,
 	            pca9671, pca9673, pca9675
diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
index aa6cc8b2a2b..d25d356c4f2 100644
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
@@ -37,6 +37,8 @@ static const struct i2c_device_id pcf857x_id[] = {
 	{ "pca9671", 16 },
 	{ "pca9673", 16 },
 	{ "pca9675", 16 },
+	{ "max7328", 8 },
+	{ "max7329", 8 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pcf857x_id);
@@ -56,6 +58,7 @@ MODULE_DEVICE_TABLE(i2c, pcf857x_id);
 struct pcf857x {
 	struct gpio_chip	chip;
 	struct i2c_client	*client;
+	struct mutex		lock;		/* protect 'out' */
 	unsigned		out;		/* software latch */
 };
 
@@ -66,9 +69,14 @@ struct pcf857x {
 static int pcf857x_input8(struct gpio_chip *chip, unsigned offset)
 {
 	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
+	int		status;
 
+	mutex_lock(&gpio->lock);
 	gpio->out |= (1 << offset);
-	return i2c_smbus_write_byte(gpio->client, gpio->out);
+	status = i2c_smbus_write_byte(gpio->client, gpio->out);
+	mutex_unlock(&gpio->lock);
+
+	return status;
 }
 
 static int pcf857x_get8(struct gpio_chip *chip, unsigned offset)
@@ -84,12 +92,17 @@ static int pcf857x_output8(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
 	unsigned	bit = 1 << offset;
+	int		status;
 
+	mutex_lock(&gpio->lock);
 	if (value)
 		gpio->out |= bit;
 	else
 		gpio->out &= ~bit;
-	return i2c_smbus_write_byte(gpio->client, gpio->out);
+	status = i2c_smbus_write_byte(gpio->client, gpio->out);
+	mutex_unlock(&gpio->lock);
+
+	return status;
 }
 
 static void pcf857x_set8(struct gpio_chip *chip, unsigned offset, int value)
@@ -124,9 +137,14 @@ static int i2c_read_le16(struct i2c_client *client)
 static int pcf857x_input16(struct gpio_chip *chip, unsigned offset)
 {
 	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
+	int		status;
 
+	mutex_lock(&gpio->lock);
 	gpio->out |= (1 << offset);
-	return i2c_write_le16(gpio->client, gpio->out);
+	status = i2c_write_le16(gpio->client, gpio->out);
+	mutex_unlock(&gpio->lock);
+
+	return status;
 }
 
 static int pcf857x_get16(struct gpio_chip *chip, unsigned offset)
@@ -142,12 +160,17 @@ static int pcf857x_output16(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct pcf857x	*gpio = container_of(chip, struct pcf857x, chip);
 	unsigned	bit = 1 << offset;
+	int		status;
 
+	mutex_lock(&gpio->lock);
 	if (value)
 		gpio->out |= bit;
 	else
 		gpio->out &= ~bit;
-	return i2c_write_le16(gpio->client, gpio->out);
+	status = i2c_write_le16(gpio->client, gpio->out);
+	mutex_unlock(&gpio->lock);
+
+	return status;
 }
 
 static void pcf857x_set16(struct gpio_chip *chip, unsigned offset, int value)
@@ -173,6 +196,8 @@ static int pcf857x_probe(struct i2c_client *client,
 	if (!gpio)
 		return -ENOMEM;
 
+	mutex_init(&gpio->lock);
+
 	gpio->chip.base = pdata->gpio_base;
 	gpio->chip.can_sleep = 1;
 	gpio->chip.owner = THIS_MODULE;
-- 
cgit v1.2.3


From 91cd4d6ef0abb1f65e81f8fe37e7d3c10344e38c Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Mon, 21 Jul 2008 14:21:35 -0700
Subject: cpusets: fix wrong domain attr updates

Fix wrong domain attr updates, or we will always update the first sched
domain attr.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>	[2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cpuset.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 459d601947a..d2cc67dac8b 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -679,7 +679,9 @@ restart:
 				if (apn == b->pn) {
 					cpus_or(*dp, *dp, b->cpus_allowed);
 					b->pn = -1;
-					update_domain_attr(dattr, b);
+					if (dattr)
+						update_domain_attr(dattr
+								   + nslot, b);
 				}
 			}
 			nslot++;
-- 
cgit v1.2.3


From ee1e6ab6056a8b9c19377257002da98b83819531 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Mon, 21 Jul 2008 14:21:36 -0700
Subject: proc: fix /proc/*/pagemap some more

struct pagemap_walk was placed on stack, some hooks are initialized, the
rest (->pgd_entry, ->pud_entry, ->pte_entry) are valid but junk.

Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Vegard Nossum" <vegard.nossum@gmail.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/task_mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 164bd9f9ede..7546a918f79 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -636,7 +636,7 @@ static ssize_t pagemap_read(struct file *file, char __user *buf,
 	struct pagemapread pm;
 	int pagecount;
 	int ret = -ESRCH;
-	struct mm_walk pagemap_walk;
+	struct mm_walk pagemap_walk = {};
 	unsigned long src;
 	unsigned long svpfn;
 	unsigned long start_vaddr;
-- 
cgit v1.2.3


From 141c024036dc8ee7b2b374c6645659f1a2fc4334 Mon Sep 17 00:00:00 2001
From: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Date: Mon, 21 Jul 2008 14:21:37 -0700
Subject: tpm: MAINTAINERS whitespace fix and email addresses addition

Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index df3fa0e42f2..11944b44c2f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4047,9 +4047,10 @@ W:	http://www.buzzard.org.uk/toshiba/
 S:	Maintained
 
 TPM DEVICE DRIVER
-P:     Debora Velarde
-P:     Rajiv Andrade
-M:	tpmdd-devel@lists.sourceforge.net
+P:	Debora Velarde
+M:	debora@linux.vnet.ibm.com
+P:	Rajiv Andrade
+M:	srajiv@linux.vnet.ibm.com
 W:	http://tpmdd.sourceforge.net
 P:	Marcel Selhorst
 M:	tpm@selhorst.net
-- 
cgit v1.2.3


From 5f17156fc55abac476d180e480bedb0f07f01b14 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Mon, 21 Jul 2008 14:21:37 -0700
Subject: Fix build on COMPAT platforms when CONFIG_EPOLL is disabled

Add missing cond_syscall() entry for compat_sys_epoll_pwait.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sys_ni.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 5b9b467de07..0fea0ee12da 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -59,6 +59,7 @@ cond_syscall(sys_epoll_create);
 cond_syscall(sys_epoll_ctl);
 cond_syscall(sys_epoll_wait);
 cond_syscall(sys_epoll_pwait);
+cond_syscall(compat_sys_epoll_pwait);
 cond_syscall(sys_semget);
 cond_syscall(sys_semop);
 cond_syscall(sys_semtimedop);
-- 
cgit v1.2.3


From d35cb360c29956510b2fe1a953bd4968536f7216 Mon Sep 17 00:00:00 2001
From: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Date: Mon, 21 Jul 2008 14:21:38 -0700
Subject: markers: fix duplicate modpost entry

When a kernel was rebuilt, the previous Module.markers was not cleared.
It caused markers with different format strings to appear as duplicates
when a markers was changed.  This problem is present since
scripts/mod/modpost.c started to generate Module.markers, commit
b2e3e658b344c6bcfb8fb694100ab2f2b5b2edb0

It therefore applies to 2.6.25, 2.6.26 and linux-next.

I merely merged the patches from Roland, Wenji and Takashi here.

Credits to
Roland McGrath <roland@redhat.com>
Wenji Huang <wenji.huang@oracle.com>
and
Takashi Nishiie <t-nishiie@np.css.fujitsu.com>

for providing the individual fixes.

- Changelog :
  - Integrated Takashi's Makefile modification to clear Module.markers upon
    make clean.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Roland McGrath <roland@redhat.com>
Cc: Wenji Huang <wenji.huang@oracle.com>
Cc: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Makefile                 | 3 ++-
 scripts/Makefile.modpost | 1 +
 scripts/mod/modpost.c    | 3 ++-
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index 6192922de9c..4bcd1cf90cb 100644
--- a/Makefile
+++ b/Makefile
@@ -1148,7 +1148,8 @@ clean: archclean $(clean-dirs)
 	@find . $(RCS_FIND_IGNORE) \
 		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-		-o -name '*.symtypes' -o -name 'modules.order' \) \
+		-o -name '*.symtypes' -o -name 'modules.order' \
+		-o -name 'Module.markers' \) \
 		-type f -print | xargs rm -f
 
 # mrproper - Delete all generated files, including .config
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 17092d6c7db..9ee9783aea5 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -101,6 +101,7 @@ quiet_cmd_kernel-mod = MODPOST $@
       cmd_kernel-mod = $(modpost) $@
 
 vmlinux.o: FORCE
+	@rm -fr $(kernelmarkersfile)
 	$(call cmd,kernel-mod)
 
 # Declare generated files as targets for modpost
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index a07f91aac92..8f038e6d5f9 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1992,7 +1992,8 @@ static void read_markers(const char *fname)
 			mod->skip = 1;
 		}
 
-		add_marker(mod, marker, fmt);
+		if (!mod->skip)
+			add_marker(mod, marker, fmt);
 	}
 	return;
 fail:
-- 
cgit v1.2.3


From 09177e85d6a0bffac8b55afd28ed8b82bd873f0b Mon Sep 17 00:00:00 2001
From: Maciej Sosnowski <maciej.sosnowski@intel.com>
Date: Tue, 22 Jul 2008 10:07:33 -0700
Subject: I/OAT: Add watchdog/reset functionality to ioatdma

Due to occasional DMA channel hangs observed for I/OAT versions 1.2 and 2.0
a watchdog has been introduced to check every 2 seconds
if all channels progress normally.
If stuck channel is detected, driver resets it.
The reset is done in two parts. The second part is scheduled
by the first one to reinitialize the channel after the restart.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/ioat_dma.c | 267 ++++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/dma/ioatdma.h  |  10 +-
 2 files changed, 271 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index 171cad69f31..da572968a7d 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -32,6 +32,7 @@
 #include <linux/dmaengine.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
 #include "ioatdma.h"
 #include "ioatdma_registers.h"
 #include "ioatdma_hw.h"
@@ -41,11 +42,17 @@
 #define to_ioat_desc(lh) container_of(lh, struct ioat_desc_sw, node)
 #define tx_to_ioat_desc(tx) container_of(tx, struct ioat_desc_sw, async_tx)
 
+#define chan_num(ch) ((int)((ch)->reg_base - (ch)->device->reg_base) / 0x80)
 static int ioat_pending_level = 4;
 module_param(ioat_pending_level, int, 0644);
 MODULE_PARM_DESC(ioat_pending_level,
 		 "high-water mark for pushing ioat descriptors (default: 4)");
 
+#define RESET_DELAY  msecs_to_jiffies(100)
+#define WATCHDOG_DELAY  round_jiffies(msecs_to_jiffies(2000))
+static void ioat_dma_chan_reset_part2(struct work_struct *work);
+static void ioat_dma_chan_watchdog(struct work_struct *work);
+
 /* internal functions */
 static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan);
 static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan);
@@ -137,6 +144,7 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device)
 		ioat_chan->reg_base = device->reg_base + (0x80 * (i + 1));
 		ioat_chan->xfercap = xfercap;
 		ioat_chan->desccount = 0;
+		INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
 		if (ioat_chan->device->version != IOAT_VER_1_2) {
 			writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE
 					| IOAT_DMA_DCA_ANY_CPU,
@@ -175,7 +183,7 @@ static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan)
 {
 	struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
 
-	if (ioat_chan->pending != 0) {
+	if (ioat_chan->pending > 0) {
 		spin_lock_bh(&ioat_chan->desc_lock);
 		__ioat1_dma_memcpy_issue_pending(ioat_chan);
 		spin_unlock_bh(&ioat_chan->desc_lock);
@@ -194,13 +202,228 @@ static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan)
 {
 	struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
 
-	if (ioat_chan->pending != 0) {
+	if (ioat_chan->pending > 0) {
 		spin_lock_bh(&ioat_chan->desc_lock);
 		__ioat2_dma_memcpy_issue_pending(ioat_chan);
 		spin_unlock_bh(&ioat_chan->desc_lock);
 	}
 }
 
+
+/**
+ * ioat_dma_chan_reset_part2 - reinit the channel after a reset
+ */
+static void ioat_dma_chan_reset_part2(struct work_struct *work)
+{
+	struct ioat_dma_chan *ioat_chan =
+		container_of(work, struct ioat_dma_chan, work.work);
+	struct ioat_desc_sw *desc;
+
+	spin_lock_bh(&ioat_chan->cleanup_lock);
+	spin_lock_bh(&ioat_chan->desc_lock);
+
+	ioat_chan->completion_virt->low = 0;
+	ioat_chan->completion_virt->high = 0;
+	ioat_chan->pending = 0;
+
+	/*
+	 * count the descriptors waiting, and be sure to do it
+	 * right for both the CB1 line and the CB2 ring
+	 */
+	ioat_chan->dmacount = 0;
+	if (ioat_chan->used_desc.prev) {
+		desc = to_ioat_desc(ioat_chan->used_desc.prev);
+		do {
+			ioat_chan->dmacount++;
+			desc = to_ioat_desc(desc->node.next);
+		} while (&desc->node != ioat_chan->used_desc.next);
+	}
+
+	/*
+	 * write the new starting descriptor address
+	 * this puts channel engine into ARMED state
+	 */
+	desc = to_ioat_desc(ioat_chan->used_desc.prev);
+	switch (ioat_chan->device->version) {
+	case IOAT_VER_1_2:
+		writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
+		       ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_LOW);
+		writel(((u64) desc->async_tx.phys) >> 32,
+		       ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_HIGH);
+
+		writeb(IOAT_CHANCMD_START, ioat_chan->reg_base
+			+ IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
+		break;
+	case IOAT_VER_2_0:
+		writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
+		       ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_LOW);
+		writel(((u64) desc->async_tx.phys) >> 32,
+		       ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_HIGH);
+
+		/* tell the engine to go with what's left to be done */
+		writew(ioat_chan->dmacount,
+		       ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
+
+		break;
+	}
+	dev_err(&ioat_chan->device->pdev->dev,
+		"chan%d reset - %d descs waiting, %d total desc\n",
+		chan_num(ioat_chan), ioat_chan->dmacount, ioat_chan->desccount);
+
+	spin_unlock_bh(&ioat_chan->desc_lock);
+	spin_unlock_bh(&ioat_chan->cleanup_lock);
+}
+
+/**
+ * ioat_dma_reset_channel - restart a channel
+ * @ioat_chan: IOAT DMA channel handle
+ */
+static void ioat_dma_reset_channel(struct ioat_dma_chan *ioat_chan)
+{
+	u32 chansts, chanerr;
+
+	if (!ioat_chan->used_desc.prev)
+		return;
+
+	chanerr = readl(ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
+	chansts = (ioat_chan->completion_virt->low
+					& IOAT_CHANSTS_DMA_TRANSFER_STATUS);
+	if (chanerr) {
+		dev_err(&ioat_chan->device->pdev->dev,
+			"chan%d, CHANSTS = 0x%08x CHANERR = 0x%04x, clearing\n",
+			chan_num(ioat_chan), chansts, chanerr);
+		writel(chanerr, ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
+	}
+
+	/*
+	 * whack it upside the head with a reset
+	 * and wait for things to settle out.
+	 * force the pending count to a really big negative
+	 * to make sure no one forces an issue_pending
+	 * while we're waiting.
+	 */
+
+	spin_lock_bh(&ioat_chan->desc_lock);
+	ioat_chan->pending = INT_MIN;
+	writeb(IOAT_CHANCMD_RESET,
+	       ioat_chan->reg_base
+	       + IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
+	spin_unlock_bh(&ioat_chan->desc_lock);
+
+	/* schedule the 2nd half instead of sleeping a long time */
+	schedule_delayed_work(&ioat_chan->work, RESET_DELAY);
+}
+
+/**
+ * ioat_dma_chan_watchdog - watch for stuck channels
+ */
+static void ioat_dma_chan_watchdog(struct work_struct *work)
+{
+	struct ioatdma_device *device =
+		container_of(work, struct ioatdma_device, work.work);
+	struct ioat_dma_chan *ioat_chan;
+	int i;
+
+	union {
+		u64 full;
+		struct {
+			u32 low;
+			u32 high;
+		};
+	} completion_hw;
+	unsigned long compl_desc_addr_hw;
+
+	for (i = 0; i < device->common.chancnt; i++) {
+		ioat_chan = ioat_lookup_chan_by_index(device, i);
+
+		if (ioat_chan->device->version == IOAT_VER_1_2
+			/* have we started processing anything yet */
+		    && ioat_chan->last_completion
+			/* have we completed any since last watchdog cycle? */
+		    && (ioat_chan->last_completion ==
+				ioat_chan->watchdog_completion)
+			/* has TCP stuck on one cookie since last watchdog? */
+		    && (ioat_chan->watchdog_tcp_cookie ==
+				ioat_chan->watchdog_last_tcp_cookie)
+		    && (ioat_chan->watchdog_tcp_cookie !=
+				ioat_chan->completed_cookie)
+			/* is there something in the chain to be processed? */
+			/* CB1 chain always has at least the last one processed */
+		    && (ioat_chan->used_desc.prev != ioat_chan->used_desc.next)
+		    && ioat_chan->pending == 0) {
+
+			/*
+			 * check CHANSTS register for completed
+			 * descriptor address.
+			 * if it is different than completion writeback,
+			 * it is not zero
+			 * and it has changed since the last watchdog
+			 *     we can assume that channel
+			 *     is still working correctly
+			 *     and the problem is in completion writeback.
+			 *     update completion writeback
+			 *     with actual CHANSTS value
+			 * else
+			 *     try resetting the channel
+			 */
+
+			completion_hw.low = readl(ioat_chan->reg_base +
+				IOAT_CHANSTS_OFFSET_LOW(ioat_chan->device->version));
+			completion_hw.high = readl(ioat_chan->reg_base +
+				IOAT_CHANSTS_OFFSET_HIGH(ioat_chan->device->version));
+#if (BITS_PER_LONG == 64)
+			compl_desc_addr_hw =
+				completion_hw.full
+				& IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
+#else
+			compl_desc_addr_hw =
+				completion_hw.low & IOAT_LOW_COMPLETION_MASK;
+#endif
+
+			if ((compl_desc_addr_hw != 0)
+			   && (compl_desc_addr_hw != ioat_chan->watchdog_completion)
+			   && (compl_desc_addr_hw != ioat_chan->last_compl_desc_addr_hw)) {
+				ioat_chan->last_compl_desc_addr_hw = compl_desc_addr_hw;
+				ioat_chan->completion_virt->low = completion_hw.low;
+				ioat_chan->completion_virt->high = completion_hw.high;
+			} else {
+				ioat_dma_reset_channel(ioat_chan);
+				ioat_chan->watchdog_completion = 0;
+				ioat_chan->last_compl_desc_addr_hw = 0;
+			}
+
+		/*
+		 * for version 2.0 if there are descriptors yet to be processed
+		 * and the last completed hasn't changed since the last watchdog
+		 *      if they haven't hit the pending level
+		 *          issue the pending to push them through
+		 *      else
+		 *          try resetting the channel
+		 */
+		} else if (ioat_chan->device->version == IOAT_VER_2_0
+		    && ioat_chan->used_desc.prev
+		    && ioat_chan->last_completion
+		    && ioat_chan->last_completion == ioat_chan->watchdog_completion) {
+
+			if (ioat_chan->pending < ioat_pending_level)
+				ioat2_dma_memcpy_issue_pending(&ioat_chan->common);
+			else {
+				ioat_dma_reset_channel(ioat_chan);
+				ioat_chan->watchdog_completion = 0;
+			}
+		} else {
+			ioat_chan->last_compl_desc_addr_hw = 0;
+			ioat_chan->watchdog_completion
+					= ioat_chan->last_completion;
+		}
+
+		ioat_chan->watchdog_last_tcp_cookie =
+			ioat_chan->watchdog_tcp_cookie;
+	}
+
+	schedule_delayed_work(&device->work, WATCHDOG_DELAY);
+}
+
 static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
 {
 	struct ioat_dma_chan *ioat_chan = to_ioat_chan(tx->chan);
@@ -586,6 +809,10 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan)
 	ioat_chan->last_completion = ioat_chan->completion_addr = 0;
 	ioat_chan->pending = 0;
 	ioat_chan->dmacount = 0;
+	ioat_chan->watchdog_completion = 0;
+	ioat_chan->last_compl_desc_addr_hw = 0;
+	ioat_chan->watchdog_tcp_cookie =
+		ioat_chan->watchdog_last_tcp_cookie = 0;
 }
 
 /**
@@ -717,8 +944,12 @@ static struct dma_async_tx_descriptor *ioat1_dma_prep_memcpy(
 		new->src = dma_src;
 		new->async_tx.flags = flags;
 		return &new->async_tx;
-	} else
+	} else {
+		dev_err(&ioat_chan->device->pdev->dev,
+			"chan%d - get_next_desc failed: %d descs waiting, %d total desc\n",
+			chan_num(ioat_chan), ioat_chan->dmacount, ioat_chan->desccount);
 		return NULL;
+	}
 }
 
 static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy(
@@ -745,8 +976,13 @@ static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy(
 		new->src = dma_src;
 		new->async_tx.flags = flags;
 		return &new->async_tx;
-	} else
+	} else {
+		spin_unlock_bh(&ioat_chan->desc_lock);
+		dev_err(&ioat_chan->device->pdev->dev,
+			"chan%d - get_next_desc failed: %d descs waiting, %d total desc\n",
+			chan_num(ioat_chan), ioat_chan->dmacount, ioat_chan->desccount);
 		return NULL;
+	}
 }
 
 static void ioat_dma_cleanup_tasklet(unsigned long data)
@@ -821,11 +1057,25 @@ static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan)
 
 	if (phys_complete == ioat_chan->last_completion) {
 		spin_unlock_bh(&ioat_chan->cleanup_lock);
+		/*
+		 * perhaps we're stuck so hard that the watchdog can't go off?
+		 * try to catch it after 2 seconds
+		 */
+		if (time_after(jiffies,
+			       ioat_chan->last_completion_time + HZ*WATCHDOG_DELAY)) {
+			ioat_dma_chan_watchdog(&(ioat_chan->device->work.work));
+			ioat_chan->last_completion_time = jiffies;
+		}
 		return;
 	}
+	ioat_chan->last_completion_time = jiffies;
 
 	cookie = 0;
-	spin_lock_bh(&ioat_chan->desc_lock);
+	if (!spin_trylock_bh(&ioat_chan->desc_lock)) {
+		spin_unlock_bh(&ioat_chan->cleanup_lock);
+		return;
+	}
+
 	switch (ioat_chan->device->version) {
 	case IOAT_VER_1_2:
 		list_for_each_entry_safe(desc, _desc,
@@ -942,6 +1192,7 @@ static enum dma_status ioat_dma_is_complete(struct dma_chan *chan,
 
 	last_used = chan->cookie;
 	last_complete = ioat_chan->completed_cookie;
+	ioat_chan->watchdog_tcp_cookie = cookie;
 
 	if (done)
 		*done = last_complete;
@@ -1332,6 +1583,10 @@ struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
 
 	dma_async_device_register(&device->common);
 
+	INIT_DELAYED_WORK(&device->work, ioat_dma_chan_watchdog);
+	schedule_delayed_work(&device->work,
+			      WATCHDOG_DELAY);
+
 	return device;
 
 err_self_test:
@@ -1364,6 +1619,8 @@ void ioat_dma_remove(struct ioatdma_device *device)
 	pci_release_regions(device->pdev);
 	pci_disable_device(device->pdev);
 
+	cancel_delayed_work(&device->work);
+
 	list_for_each_entry_safe(chan, _chan,
 				 &device->common.channels, device_node) {
 		ioat_chan = to_ioat_chan(chan);
diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h
index f2c7fedbf00..c6ec933f989 100644
--- a/drivers/dma/ioatdma.h
+++ b/drivers/dma/ioatdma.h
@@ -28,7 +28,7 @@
 #include <linux/cache.h>
 #include <linux/pci_ids.h>
 
-#define IOAT_DMA_VERSION  "2.04"
+#define IOAT_DMA_VERSION  "2.18"
 
 enum ioat_interrupt {
 	none = 0,
@@ -40,6 +40,7 @@ enum ioat_interrupt {
 
 #define IOAT_LOW_COMPLETION_MASK	0xffffffc0
 #define IOAT_DMA_DCA_ANY_CPU		~0
+#define IOAT_WATCHDOG_PERIOD		(2 * HZ)
 
 
 /**
@@ -62,6 +63,7 @@ struct ioatdma_device {
 	struct dma_device common;
 	u8 version;
 	enum ioat_interrupt irq_mode;
+	struct delayed_work work;
 	struct msix_entry msix_entries[4];
 	struct ioat_dma_chan *idx[4];
 };
@@ -75,6 +77,7 @@ struct ioat_dma_chan {
 
 	dma_cookie_t completed_cookie;
 	unsigned long last_completion;
+	unsigned long last_completion_time;
 
 	size_t xfercap;	/* XFERCAP register value expanded out */
 
@@ -82,6 +85,10 @@ struct ioat_dma_chan {
 	spinlock_t desc_lock;
 	struct list_head free_desc;
 	struct list_head used_desc;
+	unsigned long watchdog_completion;
+	int watchdog_tcp_cookie;
+	u32 watchdog_last_tcp_cookie;
+	struct delayed_work work;
 
 	int pending;
 	int dmacount;
@@ -98,6 +105,7 @@ struct ioat_dma_chan {
 			u32 high;
 		};
 	} *completion_virt;
+	unsigned long last_compl_desc_addr_hw;
 	struct tasklet_struct cleanup_task;
 };
 
-- 
cgit v1.2.3


From e4268aad42e9f37d01925022830b16bab3d0d5af Mon Sep 17 00:00:00 2001
From: Alex Chiang <achiang@hp.com>
Date: Thu, 17 Jul 2008 11:13:32 -0600
Subject: PCI hotplug: fix error path in pci_slot's register_slot

Juha Leppnen noticed that an error path in register_slot() wasn't
returning appropriately, leading to a condition where we might access a
kfree'ed pointer, so let's fix that.

Additionally, fix up the copyright information in the file while
we're in there.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/acpi/pci_slot.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
index b9ab030a52d..dd376f7ad09 100644
--- a/drivers/acpi/pci_slot.c
+++ b/drivers/acpi/pci_slot.c
@@ -6,8 +6,8 @@
  *  Thanks to Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> for code
  *  review and fixes.
  *
- *  Copyright (C) 2007 Alex Chiang <achiang@hp.com>
- *  Copyright (C) 2007 Hewlett-Packard Development Company, L.P.
+ *  Copyright (C) 2007-2008 Hewlett-Packard Development Company, L.P.
+ *  	Alex Chiang <achiang@hp.com>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms and conditions of the GNU General Public License,
@@ -158,6 +158,7 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 	if (IS_ERR(pci_slot)) {
 		err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot));
 		kfree(slot);
+		return AE_OK;
 	}
 
 	slot->root_handle = parent_context->root_handle;
-- 
cgit v1.2.3


From 1aa3692da57c773e5c76de55c5c4a953962d360e Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:08:53 +0100
Subject: ttydev: Fix up compile failures in the PPC build

Fix up a couple of reported merge problems

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/icom.c        | 2 +-
 drivers/serial/serial_txx9.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 9c2df5c857c..2b7531d9f6a 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -730,7 +730,7 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 {
 	short int count, rcv_buff;
-	struct tty_struct *tty = icom_port->uart_port.info->tty;
+	struct tty_struct *tty = icom_port->uart_port.info->port.tty;
 	unsigned short int status;
 	struct uart_icount *icount;
 	unsigned long offset;
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 7ad21925869..8fcb4c5b9a2 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -272,7 +272,7 @@ static void serial_txx9_initialize(struct uart_port *port)
 static inline void
 receive_chars(struct uart_txx9_port *up, unsigned int *status)
 {
-	struct tty_struct *tty = up->port.info->tty;
+	struct tty_struct *tty = up->port.info->port.tty;
 	unsigned char ch;
 	unsigned int disr = *status;
 	int max_count = 256;
-- 
cgit v1.2.3


From 95da310e66ee8090119596c70ca8432e57f9a97f Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:09:07 +0100
Subject: usb_serial: API all change

USB serial likes to use port->tty back pointers for the real work it does and
to do so without any actual locking. Unfortunately when you consider hangup
events, hangup/parallel reopen or even worse hangup followed by parallel close
events the tty->port and port->tty pointers are not guaranteed to be the same
as port->tty is the active tty while tty->port is the port the tty may or
may not still be attached to.

So rework the entire API to pass the tty struct. For console cases we need
to pass both for now. This shows up multiple drivers that immediately crash
with USB console some of which have been fixed in the process.

Longer term we need a proper tty as console abstraction

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/aircable.c         |  19 +-
 drivers/usb/serial/airprime.c         | 355 ++++++++++++++++++++++++++++++++++
 drivers/usb/serial/ark3116.c          |  32 +--
 drivers/usb/serial/belkin_sa.c        |  69 +++----
 drivers/usb/serial/ch341.c            |  10 +-
 drivers/usb/serial/console.c          |  34 ++--
 drivers/usb/serial/cp2101.c           |  74 +++----
 drivers/usb/serial/cyberjack.c        |  47 +++--
 drivers/usb/serial/cypress_m8.c       | 117 ++++++-----
 drivers/usb/serial/digi_acceleport.c  | 127 ++++++------
 drivers/usb/serial/empeg.c            |  78 +++-----
 drivers/usb/serial/ftdi_sio.c         | 211 ++++++++++----------
 drivers/usb/serial/garmin_gps.c       |  58 ++----
 drivers/usb/serial/generic.c          |  39 ++--
 drivers/usb/serial/io_edgeport.c      | 175 ++++++-----------
 drivers/usb/serial/io_ti.c            | 109 ++++++-----
 drivers/usb/serial/ipaq.c             |  48 +++--
 drivers/usb/serial/ipw.c              |  15 +-
 drivers/usb/serial/ir-usb.c           |  81 ++++----
 drivers/usb/serial/iuu_phoenix.c      |  43 ++--
 drivers/usb/serial/keyspan.c          | 138 ++++++-------
 drivers/usb/serial/keyspan.h          |  39 ++--
 drivers/usb/serial/keyspan_pda.c      |  69 +++----
 drivers/usb/serial/kl5kusb105.c       |  74 ++++---
 drivers/usb/serial/kobil_sct.c        |  80 ++++----
 drivers/usb/serial/mct_u232.c         | 121 +++++-------
 drivers/usb/serial/mos7720.c          |  87 ++++-----
 drivers/usb/serial/mos7840.c          | 165 +++++++---------
 drivers/usb/serial/navman.c           |  10 +-
 drivers/usb/serial/omninet.c          |  26 +--
 drivers/usb/serial/option.c           | 105 ++++------
 drivers/usb/serial/oti6858.c          | 119 +++++-------
 drivers/usb/serial/pl2303.c           |  76 ++++----
 drivers/usb/serial/safe_serial.c      |  14 +-
 drivers/usb/serial/sierra.c           |  93 +++------
 drivers/usb/serial/spcp8x5.c          |  69 ++++---
 drivers/usb/serial/ti_usb_3410_5052.c | 203 ++++++++++---------
 drivers/usb/serial/usb-serial.c       |  82 ++++----
 drivers/usb/serial/usb_debug.c        |   5 +-
 drivers/usb/serial/visor.c            |  66 ++-----
 drivers/usb/serial/whiteheat.c        | 102 +++++-----
 include/linux/usb/serial.h            |  56 +++---
 42 files changed, 1820 insertions(+), 1720 deletions(-)
 create mode 100644 drivers/usb/serial/airprime.c

diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index db6f97a93c0..79ea98c66fa 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -272,7 +272,7 @@ static void aircable_read(struct work_struct *work)
 	 * 64 bytes, to ensure I do not get throttled.
 	 * Ask USB mailing list for better aproach.
 	 */
-	tty = port->tty;
+	tty = port->port.tty;
 
 	if (!tty) {
 		schedule_work(&priv->rx_work);
@@ -378,13 +378,14 @@ static void aircable_shutdown(struct usb_serial *serial)
 	}
 }
 
-static int aircable_write_room(struct usb_serial_port *port)
+static int aircable_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
 	return serial_buf_data_avail(priv->tx_buf);
 }
 
-static int aircable_write(struct usb_serial_port *port,
+static int aircable_write(struct tty_struct *tty, struct usb_serial_port *port,
 			  const unsigned char *source, int count)
 {
 	struct aircable_private *priv = usb_get_serial_port_data(port);
@@ -466,7 +467,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
 
 	if (status) {
 		dbg("%s - urb status = %d", __func__, status);
-		if (!port->open_count) {
+		if (!port->port.count) {
 			dbg("%s - port is closed, exiting.", __func__);
 			return;
 		}
@@ -494,7 +495,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 				urb->actual_length, urb->transfer_buffer);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		if (urb->actual_length <= 2) {
 			/* This is an incomplete package */
@@ -528,7 +529,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
 	}
 
 	/* Schedule the next read _if_ we are still open */
-	if (port->open_count) {
+	if (port->port.count) {
 		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 				  usb_rcvbulkpipe(port->serial->dev,
 					  port->bulk_in_endpointAddress),
@@ -547,8 +548,9 @@ static void aircable_read_bulk_callback(struct urb *urb)
 }
 
 /* Based on ftdi_sio.c throttle */
-static void aircable_throttle(struct usb_serial_port *port)
+static void aircable_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -560,8 +562,9 @@ static void aircable_throttle(struct usb_serial_port *port)
 }
 
 /* Based on ftdi_sio.c unthrottle */
-static void aircable_unthrottle(struct usb_serial_port *port)
+static void aircable_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled;
 	unsigned long flags;
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
new file mode 100644
index 00000000000..b3f1d1e8246
--- /dev/null
+++ b/drivers/usb/serial/airprime.c
@@ -0,0 +1,355 @@
+/*
+ * AirPrime CDMA Wireless Serial USB driver
+ *
+ * Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+#define URB_TRANSFER_BUFFER_SIZE	4096
+#define NUM_READ_URBS			4
+#define NUM_WRITE_URBS			4
+#define NUM_BULK_EPS			3
+#define MAX_BULK_EPS			6
+
+/* if overridden by the user, then use their value for the size of the
+ * read and write urbs, and the number of endpoints */
+static int buffer_size = URB_TRANSFER_BUFFER_SIZE;
+static int endpoints = NUM_BULK_EPS;
+static int debug;
+struct airprime_private {
+	spinlock_t lock;
+	int outstanding_urbs;
+	int throttled;
+	struct urb *read_urbp[NUM_READ_URBS];
+
+	/* Settings for the port */
+	int rts_state;	/* Handshaking pins (outputs) */
+	int dtr_state;
+	int cts_state;	/* Handshaking pins (inputs) */
+	int dsr_state;
+	int dcd_state;
+	int ri_state;
+};
+
+static int airprime_send_setup(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct airprime_private *priv;
+
+	dbg("%s", __func__);
+
+	if (port->number != 0)
+		return 0;
+
+	priv = usb_get_serial_port_data(port);
+
+	if (port->port.tty) {
+		int val = 0;
+		if (priv->dtr_state)
+			val |= 0x01;
+		if (priv->rts_state)
+			val |= 0x02;
+
+		return usb_control_msg(serial->dev,
+					usb_rcvctrlpipe(serial->dev, 0),
+					0x22, 0x21, val, 0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+	}
+
+	return 0;
+}
+
+static void airprime_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	struct tty_struct *tty;
+	int result;
+	int status = urb->status;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	if (status) {
+		dbg("%s - nonzero read bulk status received: %d",
+		    __func__, status);
+		return;
+	}
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
+
+	tty = port->port.tty;
+	if (tty && urb->actual_length) {
+		tty_insert_flip_string(tty, data, urb->actual_length);
+		tty_flip_buffer_push(tty);
+	}
+
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
+	return;
+}
+
+static void airprime_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct airprime_private *priv = usb_get_serial_port_data(port);
+	int status = urb->status;
+	unsigned long flags;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/* free up the transfer buffer, as usb_free_urb() does not do this */
+	kfree(urb->transfer_buffer);
+
+	if (status)
+		dbg("%s - nonzero write bulk status received: %d",
+		    __func__, status);
+	spin_lock_irqsave(&priv->lock, flags);
+	--priv->outstanding_urbs;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	usb_serial_port_softint(port);
+}
+
+static int airprime_open(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *filp)
+{
+	struct airprime_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct urb *urb;
+	char *buffer = NULL;
+	int i;
+	int result = 0;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/* initialize our private data structure if it isn't already created */
+	if (!priv) {
+		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+		if (!priv) {
+			result = -ENOMEM;
+			goto out;
+		}
+		spin_lock_init(&priv->lock);
+		usb_set_serial_port_data(port, priv);
+	}
+
+	/* Set some sane defaults */
+	priv->rts_state = 1;
+	priv->dtr_state = 1;
+
+	for (i = 0; i < NUM_READ_URBS; ++i) {
+		buffer = kmalloc(buffer_size, GFP_KERNEL);
+		if (!buffer) {
+			dev_err(&port->dev, "%s - out of memory.\n",
+				__func__);
+			result = -ENOMEM;
+			goto errout;
+		}
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			kfree(buffer);
+			dev_err(&port->dev, "%s - no more urbs?\n",
+				__func__);
+			result = -ENOMEM;
+			goto errout;
+		}
+		usb_fill_bulk_urb(urb, serial->dev,
+				  usb_rcvbulkpipe(serial->dev,
+					  port->bulk_out_endpointAddress),
+				  buffer, buffer_size,
+				  airprime_read_bulk_callback, port);
+		result = usb_submit_urb(urb, GFP_KERNEL);
+		if (result) {
+			usb_free_urb(urb);
+			kfree(buffer);
+			dev_err(&port->dev,
+				"%s - failed submitting read urb %d for port %d, error %d\n",
+				__func__, i, port->number, result);
+			goto errout;
+		}
+		/* remember this urb so we can kill it when the
+		   port is closed */
+		priv->read_urbp[i] = urb;
+	}
+
+	airprime_send_setup(port);
+
+	goto out;
+
+ errout:
+	/* some error happened, cancel any submitted urbs and clean up
+	   anything that got allocated successfully */
+
+	while (i-- != 0) {
+		urb = priv->read_urbp[i];
+		buffer = urb->transfer_buffer;
+		usb_kill_urb(urb);
+		usb_free_urb(urb);
+		kfree(buffer);
+	}
+
+ out:
+	return result;
+}
+
+static void airprime_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
+{
+	struct airprime_private *priv = usb_get_serial_port_data(port);
+	int i;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	priv->rts_state = 0;
+	priv->dtr_state = 0;
+
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected)
+		airprime_send_setup(port);
+	mutex_unlock(&port->serial->disc_mutex);
+
+	for (i = 0; i < NUM_READ_URBS; ++i) {
+		usb_kill_urb(priv->read_urbp[i]);
+		kfree(priv->read_urbp[i]->transfer_buffer);
+		usb_free_urb(priv->read_urbp[i]);
+	}
+
+	/* free up private structure */
+	kfree(priv);
+	usb_set_serial_port_data(port, NULL);
+}
+
+static int airprime_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const unsigned char *buf, int count)
+{
+	struct airprime_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct urb *urb;
+	unsigned char *buffer;
+	unsigned long flags;
+	int status;
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->outstanding_urbs > NUM_WRITE_URBS) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dbg("%s - write limit hit\n", __func__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+	buffer = kmalloc(count, GFP_ATOMIC);
+	if (!buffer) {
+		dev_err(&port->dev, "out of memory\n");
+		return -ENOMEM;
+	}
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		dev_err(&port->dev, "no more free urbs\n");
+		kfree(buffer);
+		return -ENOMEM;
+	}
+	memcpy(buffer, buf, count);
+
+	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
+
+	usb_fill_bulk_urb(urb, serial->dev,
+			  usb_sndbulkpipe(serial->dev,
+					  port->bulk_out_endpointAddress),
+			  buffer, count,
+			  airprime_write_bulk_callback, port);
+
+	/* send it down the pipe */
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		dev_err(&port->dev,
+			"%s - usb_submit_urb(write bulk) failed with status = %d\n",
+			__func__, status);
+		count = status;
+		kfree(buffer);
+	} else {
+		spin_lock_irqsave(&priv->lock, flags);
+		++priv->outstanding_urbs;
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	/* we are done with this urb, so let the host driver
+	 * really free it when it is finished with it */
+	usb_free_urb(urb);
+	return count;
+}
+
+static struct usb_driver airprime_driver = {
+	.name =		"airprime",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id =	1,
+};
+
+static struct usb_serial_driver airprime_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"airprime",
+	},
+	.usb_driver =		&airprime_driver,
+	.id_table =		id_table,
+	.open =			airprime_open,
+	.close =		airprime_close,
+	.write =		airprime_write,
+};
+
+static int __init airprime_init(void)
+{
+	int retval;
+
+	airprime_device.num_ports = endpoints;
+	if (endpoints < 0 || endpoints >= MAX_BULK_EPS)
+		airprime_device.num_ports = NUM_BULK_EPS;
+
+	retval = usb_serial_register(&airprime_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&airprime_driver);
+	if (retval)
+		usb_serial_deregister(&airprime_device);
+	return retval;
+}
+
+static void __exit airprime_exit(void)
+{
+	dbg("%s", __func__);
+
+	usb_deregister(&airprime_driver);
+	usb_serial_deregister(&airprime_device);
+}
+
+module_init(airprime_init);
+module_exit(airprime_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled");
+module_param(buffer_size, int, 0);
+MODULE_PARM_DESC(buffer_size,
+		"Size of the transfer buffers in bytes (default 4096)");
+module_param(endpoints, int, 0);
+MODULE_PARM_DESC(endpoints, "Number of bulk EPs to configure (default 3)");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 77895c8f8f3..aec61880f36 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -158,12 +158,13 @@ cleanup:
 	return -ENOMEM;
 }
 
-static void ark3116_set_termios(struct usb_serial_port *port,
+static void ark3116_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
 				struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	unsigned long flags;
 	int baud;
@@ -177,8 +178,8 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B9600 | CS8
+		*termios = tty_std_termios;
+		termios->c_cflag = B9600 | CS8
 					      | CREAD | HUPCL | CLOCAL;
 		termios->c_ispeed = 9600;
 		termios->c_ospeed = 9600;
@@ -192,7 +193,7 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
 		dbg("error kmalloc");
-		*port->tty->termios = *old_termios;
+		*termios = *old_termios;
 		return;
 	}
 
@@ -243,7 +244,7 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 	}
 
 	/* set baudrate */
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 
 	switch (baud) {
 	case 75:
@@ -262,11 +263,11 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 	case 230400:
 	case 460800:
 		/* Report the resulting rate back to the caller */
-		tty_encode_baud_rate(port->tty, baud, baud);
+		tty_encode_baud_rate(tty, baud, baud);
 		break;
 	/* set 9600 as default (if given baudrate is invalid for example) */
 	default:
-		tty_encode_baud_rate(port->tty, 9600, 9600);
+		tty_encode_baud_rate(tty, 9600, 9600);
 	case 0:
 		baud = 9600;
 	}
@@ -317,7 +318,8 @@ static void ark3116_set_termios(struct usb_serial_port *port,
 	return;
 }
 
-static int ark3116_open(struct usb_serial_port *port, struct file *filp)
+static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filp)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -332,7 +334,7 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp)
 		return -ENOMEM;
 	}
 
-	result = usb_serial_generic_open(port, filp);
+	result = usb_serial_generic_open(tty, port, filp);
 	if (result)
 		goto err_out;
 
@@ -362,8 +364,8 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp)
 	ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
 
 	/* initialise termios */
-	if (port->tty)
-		ark3116_set_termios(port, &tmp_termios);
+	if (tty)
+		ark3116_set_termios(tty, port, &tmp_termios);
 
 err_out:
 	kfree(buf);
@@ -371,9 +373,10 @@ err_out:
 	return result;
 }
 
-static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
+static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct serial_struct serstruct;
 	void __user *user_arg = (void __user *)arg;
 
@@ -403,8 +406,9 @@ static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
+static int ark3116_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	char *buf;
 	char temp;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 0a322fc53d6..1a762692c73 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -89,14 +89,13 @@ static int debug;
 /* function prototypes for a Belkin USB Serial Adapter F5U103 */
 static int  belkin_sa_startup		(struct usb_serial *serial);
 static void belkin_sa_shutdown		(struct usb_serial *serial);
-static int  belkin_sa_open		(struct usb_serial_port *port, struct file *filp);
-static void belkin_sa_close		(struct usb_serial_port *port, struct file *filp);
+static int  belkin_sa_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void belkin_sa_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
 static void belkin_sa_read_int_callback (struct urb *urb);
-static void belkin_sa_set_termios	(struct usb_serial_port *port, struct ktermios * old);
-static int  belkin_sa_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void belkin_sa_break_ctl		(struct usb_serial_port *port, int break_state );
-static int  belkin_sa_tiocmget		(struct usb_serial_port *port, struct file *file);
-static int  belkin_sa_tiocmset		(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
+static void belkin_sa_set_termios	(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
+static void belkin_sa_break_ctl		(struct tty_struct *tty, int break_state );
+static int  belkin_sa_tiocmget		(struct tty_struct *tty, struct file *file);
+static int  belkin_sa_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
 
 
 static struct usb_device_id id_table_combined [] = {
@@ -132,7 +131,6 @@ static struct usb_serial_driver belkin_device = {
 	.open =			belkin_sa_open,
 	.close =		belkin_sa_close,
 	.read_int_callback =	belkin_sa_read_int_callback,	/* How we get the status info */
-	.ioctl =		belkin_sa_ioctl,
 	.set_termios =		belkin_sa_set_termios,
 	.break_ctl =		belkin_sa_break_ctl,
 	.tiocmget =		belkin_sa_tiocmget,
@@ -190,7 +188,7 @@ static int belkin_sa_startup (struct usb_serial *serial)
 }
 
 
-static void belkin_sa_shutdown (struct usb_serial *serial)
+static void belkin_sa_shutdown(struct usb_serial *serial)
 {
 	struct belkin_sa_private *priv;
 	int i;
@@ -206,7 +204,7 @@ static void belkin_sa_shutdown (struct usb_serial *serial)
 }
 
 
-static int  belkin_sa_open (struct usb_serial_port *port, struct file *filp)
+static int  belkin_sa_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp)
 {
 	int retval = 0;
 
@@ -235,7 +233,8 @@ exit:
 } /* belkin_sa_open */
 
 
-static void belkin_sa_close (struct usb_serial_port *port, struct file *filp)
+static void belkin_sa_close (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s port %d", __func__, port->number);
 
@@ -246,7 +245,7 @@ static void belkin_sa_close (struct usb_serial_port *port, struct file *filp)
 } /* belkin_sa_close */
 
 
-static void belkin_sa_read_int_callback (struct urb *urb)
+static void belkin_sa_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct belkin_sa_private *priv;
@@ -311,7 +310,7 @@ static void belkin_sa_read_int_callback (struct urb *urb)
 	 * to look in to this before committing any code.
 	 */
 	if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
-		tty = port->tty;
+		tty = port->port.tty;
 		/* Overrun Error */
 		if (priv->last_lsr & BELKIN_SA_LSR_OE) {
 		}
@@ -334,7 +333,8 @@ exit:
 		     __func__, retval);
 }
 
-static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
+static void belkin_sa_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
@@ -347,7 +347,7 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios
 	unsigned long control_state;
 	int bad_flow_control;
 	speed_t baud;
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	
 	iflag = termios->c_iflag;
 	cflag = termios->c_cflag;
@@ -377,7 +377,7 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios
 		}
 	}
 
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 	if (baud) {
 		urb_value = BELKIN_SA_BAUD(baud);
 		/* Clip to maximum speed */
@@ -387,7 +387,7 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios
 		baud = BELKIN_SA_BAUD(urb_value);
 
 		/* Report the actual baud rate back to the caller */
-		tty_encode_baud_rate(port->tty, baud, baud);
+		tty_encode_baud_rate(tty, baud, baud);
 		if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
 			err("Set baudrate error");
 	} else {
@@ -463,8 +463,9 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios
 } /* belkin_sa_set_termios */
 
 
-static void belkin_sa_break_ctl( struct usb_serial_port *port, int break_state )
+static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 
 	if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
@@ -472,8 +473,9 @@ static void belkin_sa_break_ctl( struct usb_serial_port *port, int break_state )
 }
 
 
-static int belkin_sa_tiocmget (struct usb_serial_port *port, struct file *file)
+static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
 	unsigned long control_state;
 	unsigned long flags;
@@ -488,9 +490,10 @@ static int belkin_sa_tiocmget (struct usb_serial_port *port, struct file *file)
 }
 
 
-static int belkin_sa_tiocmset (struct usb_serial_port *port, struct file *file,
+static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
 			       unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
 	unsigned long control_state;
@@ -540,29 +543,7 @@ exit:
 }
 
 
-static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
-{
-	switch (cmd) {
-	case TIOCMIWAIT:
-		/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
-		/* TODO */
-		return( 0 );
-
-	case TIOCGICOUNT:
-		/* return count of modemline transitions */
-		/* TODO */
-		return 0;
-
-	default:
-		dbg("belkin_sa_ioctl arg not supported - 0x%04x",cmd);
-		return(-ENOIOCTLCMD);
-		break;
-	}
-	return 0;
-} /* belkin_sa_ioctl */
-
-
-static int __init belkin_sa_init (void)
+static int __init belkin_sa_init(void)
 {
 	int retval;
 	retval = usb_serial_register(&belkin_device);
@@ -583,7 +564,7 @@ failed_usb_serial_register:
 static void __exit belkin_sa_exit (void)
 {
 	usb_deregister (&belkin_driver);
-	usb_serial_deregister (&belkin_device);
+	usb_serial_deregister(&belkin_device);
 }
 
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 1f7c86bd829..f61e3ca6430 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -232,7 +232,8 @@ error:	kfree(priv);
 }
 
 /* open this device, set default parameters */
-static int ch341_open(struct usb_serial_port *port, struct file *filp)
+static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
@@ -256,7 +257,7 @@ static int ch341_open(struct usb_serial_port *port, struct file *filp)
 	if (r)
 		goto out;
 
-	r = usb_serial_generic_open(port, filp);
+	r = usb_serial_generic_open(tty, port, filp);
 
 out:	return r;
 }
@@ -264,11 +265,10 @@ out:	return r;
 /* Old_termios contains the original termios settings and
  * tty->termios contains the new setting to be used.
  */
-static void ch341_set_termios(struct usb_serial_port *port,
-			      struct ktermios *old_termios)
+static void ch341_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned baud_rate;
 
 	dbg("ch341_set_termios()");
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 201184c3fb8..940f5de6898 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -145,12 +145,12 @@ static int usb_console_setup(struct console *co, char *options)
 	}
 
 	port = serial->port[0];
-	port->tty = NULL;
+	port->port.tty = NULL;
 
 	info->port = port;
 	 
-	++port->open_count;
-	if (port->open_count == 1) {
+	++port->port.count;
+	if (port->port.count == 1) {
 		if (serial->type->set_termios) {
 			/*
 			 * allocate a fake tty so the driver can initialize
@@ -171,15 +171,15 @@ static int usb_console_setup(struct console *co, char *options)
 			}
 			memset(&dummy, 0, sizeof(struct ktermios));
 			tty->termios = termios;
-			port->tty = tty;
+			port->port.tty = tty;
 		}
 
 		/* only call the device specific open if this 
 		 * is the first time the port is opened */
 		if (serial->type->open)
-			retval = serial->type->open(port, NULL);
+			retval = serial->type->open(NULL, port, NULL);
 		else
-			retval = usb_serial_generic_open(port, NULL);
+			retval = usb_serial_generic_open(NULL, port, NULL);
 
 		if (retval) {
 			err("could not open USB console port");
@@ -188,9 +188,9 @@ static int usb_console_setup(struct console *co, char *options)
 
 		if (serial->type->set_termios) {
 			termios->c_cflag = cflag;
-			serial->type->set_termios(port, &dummy);
+			serial->type->set_termios(NULL, port, &dummy);
 
-			port->tty = NULL;
+			port->port.tty = NULL;
 			kfree(termios);
 			kfree(tty);
 		}
@@ -203,11 +203,11 @@ out:
 	return retval;
 free_termios:
 	kfree(termios);
-	port->tty = NULL;
+	port->port.tty = NULL;
 free_tty:
 	kfree(tty);
 reset_open_count:
-	port->open_count = 0;
+	port->port.count = 0;
 goto out;
 }
 
@@ -227,7 +227,7 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	if (!port->open_count) {
+	if (!port->port.count) {
 		dbg ("%s - port not opened", __func__);
 		return;
 	}
@@ -245,17 +245,17 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun
 		}
 		/* pass on to the driver specific version of this function if it is available */
 		if (serial->type->write)
-			retval = serial->type->write(port, buf, i);
+			retval = serial->type->write(NULL, port, buf, i);
 		else
-			retval = usb_serial_generic_write(port, buf, i);
+			retval = usb_serial_generic_write(NULL, port, buf, i);
 		dbg("%s - return value : %d", __func__, retval);
 		if (lf) {
 			/* append CR after LF */
 			unsigned char cr = 13;
 			if (serial->type->write)
-				retval = serial->type->write(port, &cr, 1);
+				retval = serial->type->write(NULL, port, &cr, 1);
 			else
-				retval = usb_serial_generic_write(port, &cr, 1);
+				retval = usb_serial_generic_write(NULL, port, &cr, 1);
 			dbg("%s - return value : %d", __func__, retval);
 		}
 		buf += i;
@@ -306,8 +306,8 @@ void usb_serial_console_exit (void)
 {
 	if (usbcons_info.port) {
 		unregister_console(&usbcons);
-		if (usbcons_info.port->open_count)
-			usbcons_info.port->open_count--;
+		if (usbcons_info.port->port.count)
+			usbcons_info.port->port.count--;
 		usbcons_info.port = NULL;
 	}
 }
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 2bc5576c443..46c33fc9f6c 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -37,15 +37,18 @@
 /*
  * Function Prototypes
  */
-static int cp2101_open(struct usb_serial_port*, struct file*);
-static void cp2101_cleanup(struct usb_serial_port*);
-static void cp2101_close(struct usb_serial_port*, struct file*);
-static void cp2101_get_termios(struct usb_serial_port*);
-static void cp2101_set_termios(struct usb_serial_port*, struct ktermios*);
-static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
-static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
+static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
+							struct file *);
+static void cp2101_cleanup(struct usb_serial_port *);
+static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
+							struct file*);
+static void cp2101_get_termios(struct tty_struct *);
+static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
+							struct ktermios*);
+static int cp2101_tiocmget (struct tty_struct *, struct file *);
+static int cp2101_tiocmset (struct tty_struct *, struct file *,
 		unsigned int, unsigned int);
-static void cp2101_break_ctl(struct usb_serial_port*, int);
+static void cp2101_break_ctl(struct tty_struct *, int);
 static int cp2101_startup (struct usb_serial *);
 static void cp2101_shutdown(struct usb_serial*);
 
@@ -182,7 +185,7 @@ static struct usb_serial_driver cp2101_device = {
  * 'data' is a pointer to a pre-allocated array of integers large
  * enough to hold 'size' bytes (with 4 bytes to each integer)
  */
-static int cp2101_get_config(struct usb_serial_port* port, u8 request,
+static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -228,7 +231,7 @@ static int cp2101_get_config(struct usb_serial_port* port, u8 request,
  * Values less than 16 bits wide are sent directly
  * 'size' is specified in bytes.
  */
-static int cp2101_set_config(struct usb_serial_port* port, u8 request,
+static int cp2101_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -283,13 +286,14 @@ static int cp2101_set_config(struct usb_serial_port* port, u8 request,
  * Convenience function for calling cp2101_set_config on single data values
  * without requiring an integer pointer
  */
-static inline int cp2101_set_config_single(struct usb_serial_port* port,
+static inline int cp2101_set_config_single(struct usb_serial_port *port,
 		u8 request, unsigned int data)
 {
 	return cp2101_set_config(port, request, &data, 2);
 }
 
-static int cp2101_open (struct usb_serial_port *port, struct file *filp)
+static int cp2101_open (struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	int result;
@@ -318,10 +322,10 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp)
 	}
 
 	/* Configure the termios structure */
-	cp2101_get_termios(port);
+	cp2101_get_termios(tty);
 
 	/* Set the DTR and RTS pins low */
-	cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+	cp2101_tiocmset(tty, NULL, TIOCM_DTR | TIOCM_RTS, 0);
 
 	return 0;
 }
@@ -341,7 +345,8 @@ static void cp2101_cleanup (struct usb_serial_port *port)
 	}
 }
 
-static void cp2101_close (struct usb_serial_port *port, struct file * filp)
+static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -362,19 +367,15 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp)
  * from the device, corrects any unsupported values, and configures the
  * termios structure to reflect the state of the device
  */
-static void cp2101_get_termios (struct usb_serial_port *port)
+static void cp2101_get_termios (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int cflag, modem_ctl[4];
 	unsigned int baud;
 	unsigned int bits;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port->tty || !port->tty->termios) {
-		dbg("%s - no tty structures", __func__);
-		return;
-	}
-
 	cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
 	/* Convert to baudrate */
 	if (baud)
@@ -382,8 +383,8 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 
 	dbg("%s - baud rate = %d", __func__, baud);
 
-	tty_encode_baud_rate(port->tty, baud, baud);
-	cflag = port->tty->termios->c_cflag;
+	tty_encode_baud_rate(tty, baud, baud);
+	cflag = tty->termios->c_cflag;
 
 	cp2101_get_config(port, CP2101_BITS, &bits, 2);
 	cflag &= ~CSIZE;
@@ -491,11 +492,11 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 		cflag &= ~CRTSCTS;
 	}
 
-	port->tty->termios->c_cflag = cflag;
+	tty->termios->c_cflag = cflag;
 }
 
-static void cp2101_set_termios (struct usb_serial_port *port,
-		struct ktermios *old_termios)
+static void cp2101_set_termios (struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned int cflag, old_cflag;
 	unsigned int baud = 0, bits;
@@ -503,15 +504,13 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port->tty || !port->tty->termios) {
-		dbg("%s - no tty structures", __func__);
+	if (!tty)
 		return;
-	}
-	port->tty->termios->c_cflag &= ~CMSPAR;
 
-	cflag = port->tty->termios->c_cflag;
+	tty->termios->c_cflag &= ~CMSPAR;
+	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 
 	/* If the baud rate is to be updated*/
 	if (baud != tty_termios_baud_rate(old_termios)) {
@@ -554,7 +553,7 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 		}
 	}
 	/* Report back the resulting baud rate */
-	tty_encode_baud_rate(port->tty, baud, baud);
+	tty_encode_baud_rate(tty, baud, baud);
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
@@ -651,9 +650,10 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 
 }
 
-static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file,
+static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
 		unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int control = 0;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -681,8 +681,9 @@ static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file,
 
 }
 
-static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file)
+static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int control;
 	int result;
 
@@ -702,8 +703,9 @@ static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file)
 	return result;
 }
 
-static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
+static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int state;
 
 	dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index c164e2cf275..546178ea6f2 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -57,15 +57,18 @@ static int debug;
 #define CYBERJACK_PRODUCT_ID	0x0100
 
 /* Function prototypes */
-static int cyberjack_startup (struct usb_serial *serial);
-static void cyberjack_shutdown (struct usb_serial *serial);
-static int  cyberjack_open (struct usb_serial_port *port, struct file *filp);
-static void cyberjack_close (struct usb_serial_port *port, struct file *filp);
-static int cyberjack_write (struct usb_serial_port *port, const unsigned char *buf, int count);
-static int cyberjack_write_room( struct usb_serial_port *port );
-static void cyberjack_read_int_callback (struct urb *urb);
-static void cyberjack_read_bulk_callback (struct urb *urb);
-static void cyberjack_write_bulk_callback (struct urb *urb);
+static int cyberjack_startup(struct usb_serial *serial);
+static void cyberjack_shutdown(struct usb_serial *serial);
+static int  cyberjack_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void cyberjack_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static int cyberjack_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count);
+static int cyberjack_write_room( struct tty_struct *tty);
+static void cyberjack_read_int_callback(struct urb *urb);
+static void cyberjack_read_bulk_callback(struct urb *urb);
+static void cyberjack_write_bulk_callback(struct urb *urb);
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
@@ -111,7 +114,7 @@ struct cyberjack_private {
 };
 
 /* do some startup allocations not currently performed by usb_serial_probe() */
-static int cyberjack_startup (struct usb_serial *serial)
+static int cyberjack_startup(struct usb_serial *serial)
 {
 	struct cyberjack_private *priv;
 	int i;
@@ -145,7 +148,7 @@ static int cyberjack_startup (struct usb_serial *serial)
 	return( 0 );
 }
 
-static void cyberjack_shutdown (struct usb_serial *serial)
+static void cyberjack_shutdown(struct usb_serial *serial)
 {
 	int i;
 	
@@ -159,7 +162,8 @@ static void cyberjack_shutdown (struct usb_serial *serial)
 	}
 }
 	
-static int  cyberjack_open (struct usb_serial_port *port, struct file *filp)
+static int  cyberjack_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct cyberjack_private *priv;
 	unsigned long flags;
@@ -174,7 +178,8 @@ static int  cyberjack_open (struct usb_serial_port *port, struct file *filp)
 	 * the data through, otherwise it is scheduled, and with high
 	 * data rates (like with OHCI) data can get lost.
 	 */
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	priv = usb_get_serial_port_data(port);
 	spin_lock_irqsave(&priv->lock, flags);
@@ -186,7 +191,8 @@ static int  cyberjack_open (struct usb_serial_port *port, struct file *filp)
 	return result;
 }
 
-static void cyberjack_close (struct usb_serial_port *port, struct file *filp)
+static void cyberjack_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -197,7 +203,8 @@ static void cyberjack_close (struct usb_serial_port *port, struct file *filp)
 	}
 }
 
-static int cyberjack_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int cyberjack_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
@@ -292,13 +299,13 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b
 	return (count);
 } 
 
-static int cyberjack_write_room( struct usb_serial_port *port )
+static int cyberjack_write_room(struct tty_struct *tty)
 {
 	/* FIXME: .... */
 	return CYBERJACK_LOCAL_BUF_SIZE;
 }
 
-static void cyberjack_read_int_callback( struct urb *urb )
+static void cyberjack_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
@@ -355,7 +362,7 @@ resubmit:
 	dbg("%s - usb_submit_urb(int urb)", __func__);
 }
 
-static void cyberjack_read_bulk_callback (struct urb *urb)
+static void cyberjack_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
@@ -374,7 +381,7 @@ static void cyberjack_read_bulk_callback (struct urb *urb)
 		return;
 	}
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty) {
 		dbg("%s - ignoring since device not open\n", __func__);
 		return;
@@ -407,7 +414,7 @@ static void cyberjack_read_bulk_callback (struct urb *urb)
 	}
 }
 
-static void cyberjack_write_bulk_callback (struct urb *urb)
+static void cyberjack_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 0230d3c0888..6999d3372d8 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -167,18 +167,18 @@ static int  cypress_earthmate_startup	(struct usb_serial *serial);
 static int  cypress_hidcom_startup	(struct usb_serial *serial);
 static int  cypress_ca42v2_startup	(struct usb_serial *serial);
 static void cypress_shutdown		(struct usb_serial *serial);
-static int  cypress_open		(struct usb_serial_port *port, struct file *filp);
-static void cypress_close		(struct usb_serial_port *port, struct file *filp);
-static int  cypress_write		(struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  cypress_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void cypress_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  cypress_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
 static void cypress_send		(struct usb_serial_port *port);
-static int  cypress_write_room		(struct usb_serial_port *port);
-static int  cypress_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void cypress_set_termios		(struct usb_serial_port *port, struct ktermios * old);
-static int  cypress_tiocmget		(struct usb_serial_port *port, struct file *file);
-static int  cypress_tiocmset		(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
-static int  cypress_chars_in_buffer	(struct usb_serial_port *port);
-static void cypress_throttle		(struct usb_serial_port *port);
-static void cypress_unthrottle		(struct usb_serial_port *port);
+static int  cypress_write_room		(struct tty_struct *tty);
+static int  cypress_ioctl		(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
+static void cypress_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
+static int  cypress_tiocmget		(struct tty_struct *tty, struct file *file);
+static int  cypress_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
+static int  cypress_chars_in_buffer	(struct tty_struct *tty);
+static void cypress_throttle		(struct tty_struct *tty);
+static void cypress_unthrottle		(struct tty_struct *tty);
 static void cypress_set_dead		(struct usb_serial_port *port);
 static void cypress_read_int_callback	(struct urb *urb);
 static void cypress_write_int_callback	(struct urb *urb);
@@ -322,8 +322,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 
 
 /* This function can either set or retrieve the current serial line settings */
-static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_rate, int data_bits, int stop_bits,
-				   int parity_enable, int parity_type, int reset, int cypress_request_type)
+static int cypress_serial_control (struct tty_struct *tty,
+	struct usb_serial_port *port, speed_t baud_rate, int data_bits,
+	int stop_bits, int parity_enable, int parity_type, int reset,
+	int cypress_request_type)
 {
 	int new_baudrate = 0, retval = 0, tries = 0;
 	struct cypress_private *priv;
@@ -395,7 +397,7 @@ static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_ra
 				spin_unlock_irqrestore(&priv->lock, flags);
 				/* If we asked for a speed change encode it */
 				if (baud_rate)
-					tty_encode_baud_rate(port->tty,
+					tty_encode_baud_rate(tty,
 							new_baudrate, new_baudrate);
 			}
 		break;
@@ -611,7 +613,8 @@ static void cypress_shutdown (struct usb_serial *serial)
 }
 
 
-static int cypress_open (struct usb_serial_port *port, struct file *filp)
+static int cypress_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
@@ -636,14 +639,15 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* setting to zero could cause data loss */
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* raise both lines and set termios */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_control = CONTROL_DTR | CONTROL_RTS;
 	priv->cmd_ctrl = 1;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	result = cypress_write(port, NULL, 0);
+	result = cypress_write(tty, port, NULL, 0);
 
 	if (result) {
 		dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __func__, result);
@@ -651,7 +655,8 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp)
 	} else
 		dbg("%s - success setting the control lines", __func__);
 
-	cypress_set_termios(port, &priv->tmp_termios);
+	if (tty)
+		cypress_set_termios(tty, port, &priv->tmp_termios);
 
 	/* setup the port and start reading from the device */
 	if(!port->interrupt_in_urb){
@@ -674,7 +679,8 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp)
 } /* cypress_open */
 
 
-static void cypress_close(struct usb_serial_port *port, struct file * filp)
+static void cypress_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned int c_cflag;
@@ -688,7 +694,7 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp)
 	spin_lock_irq(&priv->lock);
 	timeout = CYPRESS_CLOSING_WAIT;
 	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&port->tty->write_wait, &wait);
+	add_wait_queue(&tty->write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (cypress_buf_data_avail(priv->buf) == 0
@@ -701,7 +707,7 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp)
 		spin_lock_irq(&priv->lock);
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->tty->write_wait, &wait);
+	remove_wait_queue(&tty->write_wait, &wait);
 	/* clear out any remaining data in the buffer */
 	cypress_buf_clear(priv->buf);
 	spin_unlock_irq(&priv->lock);
@@ -713,19 +719,21 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp)
 		return;
 	}
 	/* wait for characters to drain from device */
-	bps = tty_get_baud_rate(port->tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps,HZ/10);
-	else
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
+	if (tty) {
+		bps = tty_get_baud_rate(tty);
+		if (bps > 1200)
+			timeout = max((HZ*2560)/bps,HZ/10);
+		else
+			timeout = 2*HZ;
+		schedule_timeout_interruptible(timeout);
+	}
 
 	dbg("%s - stopping urbs", __func__);
 	usb_kill_urb (port->interrupt_in_urb);
 	usb_kill_urb (port->interrupt_out_urb);
 
-	if (port->tty) {
-		c_cflag = port->tty->termios->c_cflag;
+	if (tty) {
+		c_cflag = tty->termios->c_cflag;
 		if (c_cflag & HUPCL) {
 			/* drop dtr and rts */
 			priv = usb_get_serial_port_data(port);
@@ -733,7 +741,7 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp)
 			priv->line_control = 0;
 			priv->cmd_ctrl = 1;
 			spin_unlock_irq(&priv->lock);
-			cypress_write(port, NULL, 0);
+			cypress_write(tty, port, NULL, 0);
 		}
 	}
 
@@ -744,7 +752,8 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp)
 } /* cypress_close */
 
 
-static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -878,8 +887,9 @@ send:
 
 
 /* returns how much space is available in the soft buffer */
-static int cypress_write_room(struct usb_serial_port *port)
+static int cypress_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -895,8 +905,9 @@ static int cypress_write_room(struct usb_serial_port *port)
 }
 
 
-static int cypress_tiocmget (struct usb_serial_port *port, struct file *file)
+static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	__u8 status, control;
 	unsigned int result = 0;
@@ -922,9 +933,10 @@ static int cypress_tiocmget (struct usb_serial_port *port, struct file *file)
 }
 
 
-static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
+static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
 			       unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	
@@ -942,12 +954,14 @@ static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
 	priv->cmd_ctrl = 1;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return cypress_write(port, NULL, 0);
+	return cypress_write(tty, port, NULL, 0);
 }
 
 
-static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+static int cypress_ioctl(struct tty_struct *tty, struct file * file,
+					unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 
 	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
@@ -983,22 +997,18 @@ static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsi
 				}
 			}
 			return 0;
-			break;
 		default:
 			break;
 	}
-
 	dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
-
 	return -ENOIOCTLCMD;
 } /* cypress_ioctl */
 
 
-static void cypress_set_termios (struct usb_serial_port *port,
-		struct ktermios *old_termios)
+static void cypress_set_termios(struct tty_struct *tty,
+	struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	int data_bits, stop_bits, parity_type, parity_enable;
 	unsigned cflag, iflag;
 	unsigned long flags;
@@ -1007,8 +1017,6 @@ static void cypress_set_termios (struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	tty = port->tty;
-
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
 		if (priv->chiptype == CT_EARTHMATE) {
@@ -1096,13 +1104,13 @@ static void cypress_set_termios (struct usb_serial_port *port,
 			"%d data_bits (+5)", __func__, stop_bits,
 			parity_enable, parity_type, data_bits);
 
-	cypress_serial_control(port, tty_get_baud_rate(tty), data_bits, stop_bits,
+	cypress_serial_control(tty, port, tty_get_baud_rate(tty), data_bits, stop_bits,
 			parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
 
 	/* we perform a CYPRESS_GET_CONFIG so that the current settings are
 	 * filled into the private structure this should confirm that all is
 	 * working if it returns what we just set */
-	cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
+	cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
 
 	/* Here we can define custom tty settings for devices; the main tty
 	 * termios flag base comes from empeg.c */
@@ -1142,14 +1150,15 @@ static void cypress_set_termios (struct usb_serial_port *port,
 	/* if necessary, set lines */
 	if (linechange) {
 		priv->cmd_ctrl = 1;
-		cypress_write(port, NULL, 0);
+		cypress_write(tty, port, NULL, 0);
 	}
 } /* cypress_set_termios */
 
 
 /* returns amount of data still left in soft buffer */
-static int cypress_chars_in_buffer(struct usb_serial_port *port)
+static int cypress_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -1165,8 +1174,9 @@ static int cypress_chars_in_buffer(struct usb_serial_port *port)
 }
 
 
-static void cypress_throttle (struct usb_serial_port *port)
+static void cypress_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -1178,8 +1188,9 @@ static void cypress_throttle (struct usb_serial_port *port)
 }
 
 
-static void cypress_unthrottle (struct usb_serial_port *port)
+static void cypress_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled, result;
 	unsigned long flags;
@@ -1251,7 +1262,7 @@ static void cypress_read_int_callback(struct urb *urb)
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
@@ -1327,7 +1338,7 @@ static void cypress_read_int_callback(struct urb *urb)
 					data[i]);
 			tty_insert_flip_char(tty, data[i], tty_flag);
 		}
-		tty_flip_buffer_push(port->tty);
+		tty_flip_buffer_push(port->port.tty);
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -1339,7 +1350,7 @@ continue_read:
 
 	/* Continue trying to always read... unless the port has closed. */
 
-	if (port->open_count > 0 && priv->comm_is_ok) {
+	if (port->port.count > 0 && priv->comm_is_ok) {
 		usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
 				usb_rcvintpipe(port->serial->dev,
 					port->interrupt_in_endpointAddress),
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 28bc6fcf44f..dc92dbfc962 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -15,7 +15,7 @@
 *  Al Borchers (borchers@steinerpoint.com)
 * 
 * (12/03/2001) gkh
-*	switched to using port->open_count instead of private version.
+*	switched to using port->port.count instead of private version.
 *	Removed port->active
 *
 * (04/08/2001) gb
@@ -441,22 +441,23 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 	unsigned int modem_signals, int interruptible);
 static int digi_transmit_idle(struct usb_serial_port *port,
 	unsigned long timeout);
-static void digi_rx_throttle (struct usb_serial_port *port);
-static void digi_rx_unthrottle (struct usb_serial_port *port);
-static void digi_set_termios(struct usb_serial_port *port,
-	struct ktermios *old_termios);
-static void digi_break_ctl(struct usb_serial_port *port, int break_state);
-static int digi_ioctl(struct usb_serial_port *port, struct file *file,
-	unsigned int cmd, unsigned long arg);
-static int digi_tiocmget(struct usb_serial_port *port, struct file *file);
-static int digi_tiocmset(struct usb_serial_port *port, struct file *file,
+static void digi_rx_throttle (struct tty_struct *tty);
+static void digi_rx_unthrottle (struct tty_struct *tty);
+static void digi_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios);
+static void digi_break_ctl(struct tty_struct *tty, int break_state);
+static int digi_tiocmget(struct tty_struct *tty, struct file *file);
+static int digi_tiocmset(struct tty_struct *tty, struct file *file,
 	unsigned int set, unsigned int clear);
-static int digi_write(struct usb_serial_port *port, const unsigned char *buf, int count);
+static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
+	const unsigned char *buf, int count);
 static void digi_write_bulk_callback(struct urb *urb);
-static int digi_write_room(struct usb_serial_port *port);
-static int digi_chars_in_buffer(struct usb_serial_port *port);
-static int digi_open(struct usb_serial_port *port, struct file *filp);
-static void digi_close(struct usb_serial_port *port, struct file *filp);
+static int digi_write_room(struct tty_struct *tty);
+static int digi_chars_in_buffer(struct tty_struct *tty);
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
+	struct file *filp);
+static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
+	struct file *filp);
 static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
 static void digi_shutdown(struct usb_serial *serial);
@@ -516,7 +517,6 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.chars_in_buffer =		digi_chars_in_buffer,
 	.throttle =			digi_rx_throttle,
 	.unthrottle =			digi_rx_unthrottle,
-	.ioctl =			digi_ioctl,
 	.set_termios =			digi_set_termios,
 	.break_ctl =			digi_break_ctl,
 	.tiocmget =			digi_tiocmget,
@@ -543,7 +543,6 @@ static struct usb_serial_driver digi_acceleport_4_device = {
 	.chars_in_buffer =		digi_chars_in_buffer,
 	.throttle =			digi_rx_throttle,
 	.unthrottle =			digi_rx_unthrottle,
-	.ioctl =			digi_ioctl,
 	.set_termios =			digi_set_termios,
 	.break_ctl =			digi_break_ctl,
 	.tiocmget =			digi_tiocmget,
@@ -604,7 +603,7 @@ static void digi_wakeup_write_lock(struct work_struct *work)
 
 static void digi_wakeup_write(struct usb_serial_port *port)
 {
-	tty_wakeup(port->tty);
+	tty_wakeup(port->port.tty);
 }
 
 
@@ -856,9 +855,10 @@ static int digi_transmit_idle(struct usb_serial_port *port,
 }
 
 
-static void digi_rx_throttle(struct usb_serial_port *port)
+static void digi_rx_throttle(struct tty_struct *tty)
 {
 	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
 
@@ -872,10 +872,11 @@ static void digi_rx_throttle(struct usb_serial_port *port)
 }
 
 
-static void digi_rx_unthrottle(struct usb_serial_port *port)
+static void digi_rx_unthrottle(struct tty_struct *tty)
 {
 	int ret = 0;
 	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
 	dbg("digi_rx_unthrottle: TOP: port=%d", priv->dp_port_num);
@@ -900,12 +901,10 @@ static void digi_rx_unthrottle(struct usb_serial_port *port)
 }
 
 
-static void digi_set_termios(struct usb_serial_port *port,
-					struct ktermios *old_termios)
+static void digi_set_termios(struct tty_struct *tty, 
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-
 	struct digi_port *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned int iflag = tty->termios->c_iflag;
 	unsigned int cflag = tty->termios->c_cflag;
 	unsigned int old_iflag = old_termios->c_iflag;
@@ -1088,8 +1087,9 @@ static void digi_set_termios(struct usb_serial_port *port,
 }
 
 
-static void digi_break_ctl(struct usb_serial_port *port, int break_state)
+static void digi_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned char buf[4];
 
 	buf[0] = DIGI_CMD_BREAK_CONTROL;
@@ -1100,8 +1100,9 @@ static void digi_break_ctl(struct usb_serial_port *port, int break_state)
 }
 
 
-static int digi_tiocmget(struct usb_serial_port *port, struct file *file)
+static int digi_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	unsigned int val;
 	unsigned long flags;
@@ -1115,9 +1116,10 @@ static int digi_tiocmget(struct usb_serial_port *port, struct file *file)
 }
 
 
-static int digi_tiocmset(struct usb_serial_port *port, struct file *file,
+static int digi_tiocmset(struct tty_struct *tty, struct file *file,
 	unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	unsigned int val;
 	unsigned long flags;
@@ -1131,27 +1133,8 @@ static int digi_tiocmset(struct usb_serial_port *port, struct file *file,
 }
 
 
-static int digi_ioctl(struct usb_serial_port *port, struct file *file,
-	unsigned int cmd, unsigned long arg)
-{
-	struct digi_port *priv = usb_get_serial_port_data(port);
-	dbg("digi_ioctl: TOP: port=%d, cmd=0x%x", priv->dp_port_num, cmd);
-
-	switch (cmd) {
-	case TIOCMIWAIT:
-		/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
-		/* TODO */
-		return 0;
-	case TIOCGICOUNT:
-		/* return count of modemline transitions */
-		/* TODO */
-		return 0;
-	}
-	return -ENOIOCTLCMD;
-
-}
-
-static int digi_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 
 	int ret,data_len,new_len;
@@ -1261,7 +1244,7 @@ static void digi_write_bulk_callback(struct urb *urb)
 	/* try to send any buffered data on this port, if it is open */
 	spin_lock(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
-	if (port->open_count && port->write_urb->status != -EINPROGRESS
+	if (port->port.count && port->write_urb->status != -EINPROGRESS
 	    && priv->dp_out_buf_len > 0) {
 		*((unsigned char *)(port->write_urb->transfer_buffer))
 			= (unsigned char)DIGI_CMD_SEND_DATA;
@@ -1288,11 +1271,11 @@ static void digi_write_bulk_callback(struct urb *urb)
 			__func__, ret, priv->dp_port_num);
 }
 
-static int digi_write_room(struct usb_serial_port *port)
+static int digi_write_room(struct tty_struct *tty)
 {
-
-	int room;
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
+	int room;
 	unsigned long flags = 0;
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
@@ -1308,12 +1291,11 @@ static int digi_write_room(struct usb_serial_port *port)
 
 }
 
-static int digi_chars_in_buffer(struct usb_serial_port *port)
+static int digi_chars_in_buffer(struct tty_struct *tty)
 {
-
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
-
 	if (port->write_urb->status == -EINPROGRESS
 	    || priv->dp_write_urb_in_use) {
 		dbg("digi_chars_in_buffer: port=%d, chars=%d",
@@ -1329,7 +1311,8 @@ static int digi_chars_in_buffer(struct usb_serial_port *port)
 }
 
 
-static int digi_open(struct usb_serial_port *port, struct file *filp)
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	int ret;
 	unsigned char buf[32];
@@ -1338,7 +1321,7 @@ static int digi_open(struct usb_serial_port *port, struct file *filp)
 	unsigned long flags = 0;
 
 	dbg("digi_open: TOP: port=%d, open_count=%d",
-		priv->dp_port_num, port->open_count);
+		priv->dp_port_num, port->port.count);
 
 	/* be sure the device is started up */
 	if (digi_startup_device(port->serial) != 0)
@@ -1380,9 +1363,11 @@ static int digi_open(struct usb_serial_port *port, struct file *filp)
 		dbg("digi_open: write oob failed, ret=%d", ret);
 
 	/* set termios settings */
-	not_termios.c_cflag = ~port->tty->termios->c_cflag;
-	not_termios.c_iflag = ~port->tty->termios->c_iflag;
-	digi_set_termios(port, &not_termios);
+	if (tty) {
+		not_termios.c_cflag = ~tty->termios->c_cflag;
+		not_termios.c_iflag = ~tty->termios->c_iflag;
+		digi_set_termios(tty, port, &not_termios);
+	}
 
 	/* set DTR and RTS */
 	digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1);
@@ -1391,16 +1376,16 @@ static int digi_open(struct usb_serial_port *port, struct file *filp)
 }
 
 
-static void digi_close(struct usb_serial_port *port, struct file *filp)
+static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	DEFINE_WAIT(wait);
 	int ret;
 	unsigned char buf[32];
-	struct tty_struct *tty = port->tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
 	dbg("digi_close: TOP: port=%d, open_count=%d",
-		priv->dp_port_num, port->open_count);
+		priv->dp_port_num, port->port.count);
 
 	mutex_lock(&port->serial->disc_mutex);
 	/* if disconnected, just clear flags */
@@ -1663,7 +1648,7 @@ static int digi_read_inb_callback(struct urb *urb)
 {
 
 	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	int opcode = ((unsigned char *)urb->transfer_buffer)[0];
 	int len = ((unsigned char *)urb->transfer_buffer)[1];
@@ -1675,7 +1660,7 @@ static int digi_read_inb_callback(struct urb *urb)
 
 	/* do not process callbacks on closed ports */
 	/* but do continue the read chain */
-	if (port->open_count == 0)
+	if (port->port.count == 0)
 		return 0;
 
 	/* short/multiple packet check */
@@ -1785,17 +1770,17 @@ static int digi_read_oob_callback(struct urb *urb)
 			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
 				priv->dp_modem_signals |= TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (port->open_count
-					&& port->tty->termios->c_cflag & CRTSCTS) {
-					port->tty->hw_stopped = 0;
+				if (port->port.count
+					&& port->port.tty->termios->c_cflag & CRTSCTS) {
+					port->port.tty->hw_stopped = 0;
 					digi_wakeup_write(port);
 				}
 			} else {
 				priv->dp_modem_signals &= ~TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (port->open_count
-					&& port->tty->termios->c_cflag & CRTSCTS) {
-					port->tty->hw_stopped = 1;
+				if (port->port.count
+					&& port->port.tty->termios->c_cflag & CRTSCTS) {
+					port->port.tty->hw_stopped = 1;
 				}
 			}
 			if (val & DIGI_READ_INPUT_SIGNALS_DSR)
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index c5ec309a3cb..47ebdf5fad8 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -31,7 +31,7 @@
  *	Moved MOD_DEC_USE_COUNT to end of empeg_close().
  * 
  * (12/03/2000) gb
- *	Added port->tty->ldisc.set_termios(port->tty, NULL) to empeg_open()
+ *	Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to empeg_open()
  *	This notifies the tty driver that the termios have changed.
  * 
  * (11/13/2000) gb
@@ -77,22 +77,18 @@ static int debug;
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open			(struct usb_serial_port *port, struct file *filp);
-static void empeg_close			(struct usb_serial_port *port, struct file *filp);
-static int  empeg_write			(struct usb_serial_port *port,
+static int  empeg_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void empeg_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  empeg_write			(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf,
 					int count);
-static int  empeg_write_room		(struct usb_serial_port *port);
-static int  empeg_chars_in_buffer	(struct usb_serial_port *port);
-static void empeg_throttle		(struct usb_serial_port *port);
-static void empeg_unthrottle		(struct usb_serial_port *port);
+static int  empeg_write_room		(struct tty_struct *tty);
+static int  empeg_chars_in_buffer	(struct tty_struct *tty);
+static void empeg_throttle		(struct tty_struct *tty);
+static void empeg_unthrottle		(struct tty_struct *tty);
 static int  empeg_startup		(struct usb_serial *serial);
 static void empeg_shutdown		(struct usb_serial *serial);
-static int  empeg_ioctl			(struct usb_serial_port *port,
-					struct file * file,
-					unsigned int cmd,
-					unsigned long arg);
-static void empeg_set_termios		(struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios);
 static void empeg_write_bulk_callback	(struct urb *urb);
 static void empeg_read_bulk_callback	(struct urb *urb);
 
@@ -125,7 +121,6 @@ static struct usb_serial_driver empeg_device = {
 	.unthrottle =		empeg_unthrottle,
 	.attach =		empeg_startup,
 	.shutdown =		empeg_shutdown,
-	.ioctl =		empeg_ioctl,
 	.set_termios =		empeg_set_termios,
 	.write =		empeg_write,
 	.write_room =		empeg_write_room,
@@ -145,7 +140,8 @@ static int		bytes_out;
 /******************************************************************************
  * Empeg specific driver functions
  ******************************************************************************/
-static int empeg_open (struct usb_serial_port *port, struct file *filp)
+static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
@@ -153,7 +149,7 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp)
 	dbg("%s - port %d", __func__, port->number);
 
 	/* Force default termio settings */
-	empeg_set_termios (port, NULL) ;
+	empeg_set_termios (tty, port, NULL) ;
 
 	bytes_in = 0;
 	bytes_out = 0;
@@ -178,7 +174,8 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp)
 }
 
 
-static void empeg_close (struct usb_serial_port *port, struct file * filp)
+static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -189,7 +186,7 @@ static void empeg_close (struct usb_serial_port *port, struct file * filp)
 }
 
 
-static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	struct urb *urb;
@@ -203,7 +200,6 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf,
 	dbg("%s - port %d", __func__, port->number);
 
 	while (count > 0) {
-
 		/* try to find a free urb in our list of them */
 		urb = NULL;
 
@@ -262,15 +258,14 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf,
 		bytes_out += transfer_size;
 
 	}
-
 exit:
 	return bytes_sent;
-
 } 
 
 
-static int empeg_write_room (struct usb_serial_port *port)
+static int empeg_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 	int i;
 	int room = 0;
@@ -278,25 +273,22 @@ static int empeg_write_room (struct usb_serial_port *port)
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave (&write_urb_pool_lock, flags);
-
 	/* tally up the number of bytes available */
 	for (i = 0; i < NUM_URBS; ++i) {
 		if (write_urb_pool[i]->status != -EINPROGRESS) {
 			room += URB_TRANSFER_BUFFER_SIZE;
 		}
 	} 
-
 	spin_unlock_irqrestore (&write_urb_pool_lock, flags);
-
 	dbg("%s - returns %d", __func__, room);
-
-	return (room);
+	return room;
 
 }
 
 
-static int empeg_chars_in_buffer (struct usb_serial_port *port)
+static int empeg_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 	int i;
 	int chars = 0;
@@ -356,7 +348,7 @@ static void empeg_read_bulk_callback (struct urb *urb)
 
 	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 
 	if (urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
@@ -386,27 +378,24 @@ static void empeg_read_bulk_callback (struct urb *urb)
 }
 
 
-static void empeg_throttle (struct usb_serial_port *port)
+static void empeg_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
 }
 
 
-static void empeg_unthrottle (struct usb_serial_port *port)
+static void empeg_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int result;
-
 	dbg("%s - port %d", __func__, port->number);
 
 	port->read_urb->dev = port->serial->dev;
-
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-
 	if (result)
 		dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
-
-	return;
 }
 
 
@@ -436,17 +425,10 @@ static void empeg_shutdown (struct usb_serial *serial)
 }
 
 
-static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
-{
-	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
-
-	return -ENOIOCTLCMD;
-}
-
-
-static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
+static void empeg_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	dbg("%s - port %d", __func__, port->number);
 
 	/*
@@ -491,8 +473,8 @@ static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *ol
 	 * this is bad as it opens up the possibility of dropping bytes
 	 * on the floor.  We don't want to drop bytes on the floor. :)
 	 */
-	port->tty->low_latency = 1;
-	tty_encode_baud_rate(port->tty, 115200, 115200);
+	tty->low_latency = 1;
+	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0ff4a3971e4..abbb447e537 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -682,21 +682,21 @@ static int  ftdi_sio_probe	(struct usb_serial *serial, const struct usb_device_i
 static void ftdi_shutdown		(struct usb_serial *serial);
 static int  ftdi_sio_port_probe	(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove	(struct usb_serial_port *port);
-static int  ftdi_open			(struct usb_serial_port *port, struct file *filp);
-static void ftdi_close			(struct usb_serial_port *port, struct file *filp);
-static int  ftdi_write			(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  ftdi_write_room		(struct usb_serial_port *port);
-static int  ftdi_chars_in_buffer	(struct usb_serial_port *port);
+static int  ftdi_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void ftdi_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  ftdi_write			(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  ftdi_write_room		(struct tty_struct *tty);
+static int  ftdi_chars_in_buffer	(struct tty_struct *tty);
 static void ftdi_write_bulk_callback	(struct urb *urb);
 static void ftdi_read_bulk_callback	(struct urb *urb);
 static void ftdi_process_read		(struct work_struct *work);
-static void ftdi_set_termios		(struct usb_serial_port *port, struct ktermios * old);
-static int  ftdi_tiocmget               (struct usb_serial_port *port, struct file *file);
-static int  ftdi_tiocmset		(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
-static int  ftdi_ioctl			(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void ftdi_break_ctl		(struct usb_serial_port *port, int break_state );
-static void ftdi_throttle		(struct usb_serial_port *port);
-static void ftdi_unthrottle		(struct usb_serial_port *port);
+static void ftdi_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
+static int  ftdi_tiocmget               (struct tty_struct *tty, struct file *file);
+static int  ftdi_tiocmset		(struct tty_struct *tty, struct file * file, unsigned int set, unsigned int clear);
+static int  ftdi_ioctl			(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
+static void ftdi_break_ctl		(struct tty_struct *tty, int break_state );
+static void ftdi_throttle		(struct tty_struct *tty);
+static void ftdi_unthrottle		(struct tty_struct *tty);
 
 static unsigned short int ftdi_232am_baud_base_to_divisor (int baud, int base);
 static unsigned short int ftdi_232am_baud_to_divisor (int baud);
@@ -843,42 +843,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned
 }
 
 
-static __u32 get_ftdi_divisor(struct usb_serial_port * port);
-
-
-static int change_speed(struct usb_serial_port *port)
-{
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char *buf;
-        __u16 urb_value;
-	__u16 urb_index;
-	__u32 urb_index_value;
-	int rv;
-
-	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
-		return -ENOMEM;
-
-	urb_index_value = get_ftdi_divisor(port);
-	urb_value = (__u16)urb_index_value;
-	urb_index = (__u16)(urb_index_value >> 16);
-	if (priv->interface) {	/* FT2232C */
-		urb_index = (__u16)((urb_index << 8) | priv->interface);
-	}
-
-	rv = usb_control_msg(port->serial->dev,
-			    usb_sndctrlpipe(port->serial->dev, 0),
-			    FTDI_SIO_SET_BAUDRATE_REQUEST,
-			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
-			    urb_value, urb_index,
-			    buf, 0, WDR_SHORT_TIMEOUT);
-
-	kfree(buf);
-	return rv;
-}
-
-
-static __u32 get_ftdi_divisor(struct usb_serial_port * port)
+static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *port)
 { /* get_ftdi_divisor */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	__u32 div_value = 0;
@@ -910,7 +875,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 
 	/* 1. Get the baud rate from the tty settings, this observes alt_speed hack */
 
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 	dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
 
 	/* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */
@@ -976,10 +941,42 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 			ftdi_chip_name[priv->chip_type]);
 	}
 
-	tty_encode_baud_rate(port->tty, baud, baud);
+	tty_encode_baud_rate(tty, baud, baud);
 	return(div_value);
 }
 
+static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	char *buf;
+        __u16 urb_value;
+	__u16 urb_index;
+	__u32 urb_index_value;
+	int rv;
+
+	buf = kmalloc(1, GFP_NOIO);
+	if (!buf)
+		return -ENOMEM;
+
+	urb_index_value = get_ftdi_divisor(tty, port);
+	urb_value = (__u16)urb_index_value;
+	urb_index = (__u16)(urb_index_value >> 16);
+	if (priv->interface) {	/* FT2232C */
+		urb_index = (__u16)((urb_index << 8) | priv->interface);
+	}
+
+	rv = usb_control_msg(port->serial->dev,
+			    usb_sndctrlpipe(port->serial->dev, 0),
+			    FTDI_SIO_SET_BAUDRATE_REQUEST,
+			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
+			    urb_value, urb_index,
+			    buf, 0, WDR_SHORT_TIMEOUT);
+
+	kfree(buf);
+	return rv;
+}
+
+
 
 static int get_serial_info(struct usb_serial_port * port, struct serial_struct __user * retinfo)
 {
@@ -998,7 +995,8 @@ static int get_serial_info(struct usb_serial_port * port, struct serial_struct _
 } /* get_serial_info */
 
 
-static int set_serial_info(struct usb_serial_port * port, struct serial_struct __user * newinfo)
+static int set_serial_info(struct tty_struct *tty,
+	struct usb_serial_port * port, struct serial_struct __user * newinfo)
 { /* set_serial_info */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct serial_struct new_serial;
@@ -1030,30 +1028,29 @@ static int set_serial_info(struct usb_serial_port * port, struct serial_struct _
 	               (new_serial.flags & ASYNC_FLAGS));
 	priv->custom_divisor = new_serial.custom_divisor;
 
-	port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 check_and_exit:
 	if ((old_priv.flags & ASYNC_SPD_MASK) !=
 	     (priv->flags & ASYNC_SPD_MASK)) {
 		if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			port->tty->alt_speed = 57600;
+			tty->alt_speed = 57600;
 		else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			port->tty->alt_speed = 115200;
+			tty->alt_speed = 115200;
 		else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			port->tty->alt_speed = 230400;
+			tty->alt_speed = 230400;
 		else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			port->tty->alt_speed = 460800;
+			tty->alt_speed = 460800;
 		else
-			port->tty->alt_speed = 0;
+			tty->alt_speed = 0;
 	}
 	if (((old_priv.flags & ASYNC_SPD_MASK) !=
 	     (priv->flags & ASYNC_SPD_MASK)) ||
 	    (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
 	     (old_priv.custom_divisor != priv->custom_divisor))) {
-		change_speed(port);
+		change_speed(tty, port);
 	}
-
-	return (0);
+	return 0;
 
 } /* set_serial_info */
 
@@ -1415,7 +1412,8 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
-static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
+static int ftdi_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 { /* ftdi_open */
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1433,8 +1431,8 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 	priv->rx_bytes = 0;
 	spin_unlock_irqrestore(&priv->rx_lock, flags);
 
-	if (port->tty)
-		port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	if (tty)
+		tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	/* No error checking for this (will get errors later anyway) */
 	/* See ftdi_sio.h for description of what is reset */
@@ -1448,8 +1446,8 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 	   This is same behaviour as serial.c/rs_open() - Kuba */
 
 	/* ftdi_set_termios  will send usb control messages */
-	if (port->tty)
-		ftdi_set_termios(port, port->tty->termios);
+	if (tty)
+		ftdi_set_termios(tty, port, tty->termios);
 
 	/* FIXME: Flow control might be enabled, so it should be checked -
 	   we have no control of defaults! */
@@ -1485,9 +1483,10 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
  *
  */
 
-static void ftdi_close (struct usb_serial_port *port, struct file *filp)
+static void ftdi_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 { /* ftdi_close */
-	unsigned int c_cflag = port->tty->termios->c_cflag;
+	unsigned int c_cflag = tty->termios->c_cflag;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char buf[1];
 
@@ -1527,7 +1526,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
  *
  * The new devices do not require this byte
  */
-static int ftdi_write (struct usb_serial_port *port,
+static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 			   const unsigned char *buf, int count)
 { /* ftdi_write */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1686,8 +1685,9 @@ static void ftdi_write_bulk_callback (struct urb *urb)
 } /* ftdi_write_bulk_callback */
 
 
-static int ftdi_write_room( struct usb_serial_port *port )
+static int ftdi_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int room;
 	unsigned long flags;
@@ -1707,11 +1707,11 @@ static int ftdi_write_room( struct usb_serial_port *port )
 	}
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	return room;
-} /* ftdi_write_room */
-
+}
 
-static int ftdi_chars_in_buffer (struct usb_serial_port *port)
-{ /* ftdi_chars_in_buffer */
+static int ftdi_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int buffered;
 	unsigned long flags;
@@ -1726,12 +1726,10 @@ static int ftdi_chars_in_buffer (struct usb_serial_port *port)
 		buffered = 0;
 	}
 	return buffered;
-} /* ftdi_chars_in_buffer */
-
-
+}
 
-static void ftdi_read_bulk_callback (struct urb *urb)
-{ /* ftdi_read_bulk_callback */
+static void ftdi_read_bulk_callback(struct urb *urb)
+{
 	struct usb_serial_port *port = urb->context;
 	struct tty_struct *tty;
 	struct ftdi_private *priv;
@@ -1747,10 +1745,10 @@ static void ftdi_read_bulk_callback (struct urb *urb)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (port->open_count <= 0)
+	if (port->port.count <= 0)
 		return;
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting",__func__);
 		return;
@@ -1803,10 +1801,10 @@ static void ftdi_process_read (struct work_struct *work)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (port->open_count <= 0)
+	if (port->port.count <= 0)
 		return;
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting",__func__);
 		return;
@@ -1954,7 +1952,7 @@ static void ftdi_process_read (struct work_struct *work)
 		}
 		spin_unlock_irqrestore(&priv->rx_lock, flags);
 		/* if the port is closed stop trying to read */
-		if (port->open_count > 0){
+		if (port->port.count > 0){
 			/* delay processing of remainder */
 			schedule_delayed_work(&priv->rx_work, 1);
 		} else {
@@ -1967,7 +1965,7 @@ static void ftdi_process_read (struct work_struct *work)
 	priv->rx_processed = 0;
 
 	/* if the port is closed stop trying to read */
-	if (port->open_count > 0){
+	if (port->port.count > 0){
 		/* Continue trying to always read  */
 		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 			      usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
@@ -1983,8 +1981,9 @@ static void ftdi_process_read (struct work_struct *work)
 } /* ftdi_process_read */
 
 
-static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
+static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	__u16 urb_value = 0;
 	char buf[1];
@@ -2018,11 +2017,12 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
  * WARNING: set_termios calls this with old_termios in kernel space
  */
 
-static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
+static void ftdi_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 { /* ftdi_termios */
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	__u16 urb_value; /* will hold the new flags */
 	char buf[1]; /* Perhaps I should dynamically alloc this? */
@@ -2037,7 +2037,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 	/* Force baud rate if this device requires it, unless it is set to B0. */
 	if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
 		dbg("%s: forcing baud rate for this device", __func__);
-		tty_encode_baud_rate(port->tty, priv->force_baud,
+		tty_encode_baud_rate(tty, priv->force_baud,
 					priv->force_baud);
 	}
 
@@ -2104,7 +2104,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/* set the baudrate determined before */
-		if (change_speed(port)) {
+		if (change_speed(tty, port)) {
 			err("%s urb failed to set baudrate", __func__);
 		}
 		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
@@ -2168,11 +2168,11 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 
 	}
 	return;
-} /* ftdi_termios */
-
+}
 
-static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
+static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned char buf[2];
 	int ret;
@@ -2221,15 +2221,18 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
 		priv->last_dtr_rts;
 }
 
-static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
+static int ftdi_tiocmset(struct tty_struct *tty, struct file * file,
+			unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s TIOCMSET", __func__);
 	return update_mctrl(port, set, clear);
 }
 
 
-static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+static int ftdi_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
 	dbg("%s cmd 0x%04x", __func__, cmd);
@@ -2241,7 +2244,7 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne
 		return get_serial_info(port, (struct serial_struct __user *) arg);
 
 	case TIOCSSERIAL: /* sets serial port data */
-		return set_serial_info(port, (struct serial_struct __user *) arg);
+		return set_serial_info(tty, port, (struct serial_struct __user *) arg);
 
 	/*
 	 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
@@ -2280,25 +2283,20 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne
 				 */
 			}
 		}
-		return(0);
-		break;
+		return 0;
 	default:
 		break;
-
 	}
-
-
 	/* This is not necessarily an error - turns out the higher layers will do
 	 *  some ioctls itself (see comment above)
 	 */
 	dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
+	return -ENOIOCTLCMD;
+}
 
-	return(-ENOIOCTLCMD);
-} /* ftdi_ioctl */
-
-
-static void ftdi_throttle (struct usb_serial_port *port)
+static void ftdi_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -2310,8 +2308,9 @@ static void ftdi_throttle (struct usb_serial_port *port)
 }
 
 
-static void ftdi_unthrottle (struct usb_serial_port *port)
+static void ftdi_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled;
 	unsigned long flags;
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 8ce5a56a48e..06cfa43c6f0 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -275,7 +275,7 @@ static inline int isAbortTrfCmnd(const unsigned char *buf)
 static void send_to_tty(struct usb_serial_port *port,
 			char *data, unsigned int actual_length)
 {
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;
 
 	if (tty && actual_length) {
 
@@ -970,7 +970,8 @@ static int garmin_init_session(struct usb_serial_port *port)
 
 
 
-static int garmin_open (struct usb_serial_port *port, struct file *filp)
+static int garmin_open (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	unsigned long flags;
 	int status = 0;
@@ -983,8 +984,8 @@ static int garmin_open (struct usb_serial_port *port, struct file *filp)
 	 * through, otherwise it is scheduled, and with high data rates (like
 	 * with OHCI) data can get lost.
 	 */
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	spin_lock_irqsave(&garmin_data_p->lock, flags);
 	garmin_data_p->mode  = initial_mode;
@@ -998,17 +999,16 @@ static int garmin_open (struct usb_serial_port *port, struct file *filp)
 	usb_kill_urb (port->write_urb);
 	usb_kill_urb (port->read_urb);
 
-	if (garmin_data_p->state == STATE_RESET) {
+	if (garmin_data_p->state == STATE_RESET)
 		status = garmin_init_session(port);
-	}
 
 	garmin_data_p->state = STATE_ACTIVE;
-
 	return status;
 }
 
 
-static void garmin_close (struct usb_serial_port *port, struct file * filp)
+static void garmin_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct usb_serial *serial = port->serial;
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
@@ -1042,7 +1042,6 @@ static void garmin_close (struct usb_serial_port *port, struct file * filp)
 	mutex_unlock(&port->serial->disc_mutex);
 }
 
-
 static void garmin_write_bulk_callback (struct urb *urb)
 {
 	unsigned long flags;
@@ -1145,10 +1144,8 @@ static int garmin_write_bulk (struct usb_serial_port *port,
 	return count;
 }
 
-
-
-static int garmin_write (struct usb_serial_port *port,
-			 const unsigned char *buf, int count)
+static int garmin_write (struct tty_struct *tty, struct usb_serial_port *port,
+					 const unsigned char *buf, int count)
 {
 	int pktid, pktsiz, len;
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
@@ -1158,7 +1155,6 @@ static int garmin_write (struct usb_serial_port *port,
 
 	/* check for our private packets */
 	if (count >= GARMIN_PKTHDR_LENGTH) {
-
 		len = PRIVPKTSIZ;
 		if (count < len)
 			len = count;
@@ -1226,8 +1222,9 @@ static int garmin_write (struct usb_serial_port *port,
 }
 
 
-static int garmin_write_room (struct usb_serial_port *port)
+static int garmin_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	/*
 	 * Report back the bytes currently available in the output buffer.
 	 */
@@ -1236,20 +1233,6 @@ static int garmin_write_room (struct usb_serial_port *port)
 }
 
 
-static int garmin_chars_in_buffer (struct usb_serial_port *port)
-{
-	/*
-	 * Report back the number of bytes currently in our input buffer.
-	 * Will this lock up the driver - the buffer contains an incomplete
-	 * package which will not be written to the device until it
-	 * has been completed ?
-	 */
-	//struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
-	//return garmin_data_p->insize;
-	return 0;
-}
-
-
 static void garmin_read_process(struct garmin_data * garmin_data_p,
 				 unsigned char *data, unsigned data_length)
 {
@@ -1468,10 +1451,11 @@ static int garmin_flush_queue(struct garmin_data * garmin_data_p)
 }
 
 
-static void garmin_throttle (struct usb_serial_port *port)
+static void garmin_throttle(struct tty_struct *tty)
 {
-	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 	/* set flag, data received will be put into a queue
@@ -1482,10 +1466,11 @@ static void garmin_throttle (struct usb_serial_port *port)
 }
 
 
-static void garmin_unthrottle (struct usb_serial_port *port)
+static void garmin_unthrottle (struct tty_struct *tty)
 {
-	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	unsigned long flags;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1507,8 +1492,6 @@ static void garmin_unthrottle (struct usb_serial_port *port)
 	}
 }
 
-
-
 /*
  * The timer is currently only used to send queued packets to
  * the tty in cases where the protocol provides no own handshaking
@@ -1526,7 +1509,7 @@ static void timeout_handler(unsigned long data)
 
 
 
-static int garmin_attach (struct usb_serial *serial)
+static int garmin_attach(struct usb_serial *serial)
 {
 	int status = 0;
 	struct usb_serial_port *port = serial->port[0];
@@ -1556,7 +1539,7 @@ static int garmin_attach (struct usb_serial *serial)
 }
 
 
-static void garmin_shutdown (struct usb_serial *serial)
+static void garmin_shutdown(struct usb_serial *serial)
 {
 	struct usb_serial_port *port = serial->port[0];
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
@@ -1588,7 +1571,6 @@ static struct usb_serial_driver garmin_device = {
 	.shutdown            = garmin_shutdown,
 	.write               = garmin_write,
 	.write_room          = garmin_write_room,
-	.chars_in_buffer     = garmin_chars_in_buffer,
 	.write_bulk_callback = garmin_write_bulk_callback,
 	.read_bulk_callback  = garmin_read_bulk_callback,
 	.read_int_callback   = garmin_read_int_callback,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 537f12a027c..5128018c276 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -112,7 +112,8 @@ void usb_serial_generic_deregister (void)
 #endif
 }
 
-int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
+int usb_serial_generic_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
@@ -123,8 +124,8 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
 	/* force low_latency on so that our tty_push actually forces the data through, 
 	   otherwise it is scheduled, and with high data rates (like with OHCI) data
 	   can get lost. */
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* clear the throttle flags */
 	spin_lock_irqsave(&port->lock, flags);
@@ -152,7 +153,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 
-static void generic_cleanup (struct usb_serial_port *port)
+static void generic_cleanup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
@@ -182,7 +183,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 #endif
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
-		if (port->open_count && port->read_urb) {
+		if (port->port.count && port->read_urb) {
 			r = usb_submit_urb(port->read_urb, GFP_NOIO);
 			if (r < 0)
 				c++;
@@ -192,13 +193,15 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 	return c ? -EIO : 0;
 }
 
-void usb_serial_generic_close (struct usb_serial_port *port, struct file * filp)
+void usb_serial_generic_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 	generic_cleanup (port);
 }
 
-int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+int usb_serial_generic_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	int result;
@@ -255,8 +258,9 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char *
 	return 0;
 }
 
-int usb_serial_generic_write_room (struct usb_serial_port *port)
+int usb_serial_generic_write_room (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int room = 0;
 
@@ -272,8 +276,9 @@ int usb_serial_generic_write_room (struct usb_serial_port *port)
 	return room;
 }
 
-int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port)
+int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int chars = 0;
 
@@ -286,7 +291,7 @@ int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port)
 	}
 
 	dbg("%s - returns %d", __func__, chars);
-	return (chars);
+	return chars;
 }
 
 
@@ -311,10 +316,10 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
 }
 
 /* Push data to tty layer and resubmit the bulk read URB */
-static void flush_and_resubmit_read_urb (struct usb_serial_port *port)
+static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 {
 	struct urb *urb = port->read_urb;
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;
 	int room;
 
 	/* Push data to tty */
@@ -329,7 +334,7 @@ static void flush_and_resubmit_read_urb (struct usb_serial_port *port)
 	resubmit_read_urb(port, GFP_ATOMIC);
 }
 
-void usb_serial_generic_read_bulk_callback (struct urb *urb)
+void usb_serial_generic_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
@@ -357,7 +362,7 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb)
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
-void usb_serial_generic_write_bulk_callback (struct urb *urb)
+void usb_serial_generic_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	int status = urb->status;
@@ -374,8 +379,9 @@ void usb_serial_generic_write_bulk_callback (struct urb *urb)
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
 
-void usb_serial_generic_throttle (struct usb_serial_port *port)
+void usb_serial_generic_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -387,8 +393,9 @@ void usb_serial_generic_throttle (struct usb_serial_port *port)
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-void usb_serial_generic_unthrottle (struct usb_serial_port *port)
+void usb_serial_generic_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int was_throttled;
 	unsigned long flags;
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 2fd449bcfa3..29346d79df7 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -206,18 +206,18 @@ static void edge_bulk_out_data_callback	(struct urb *urb);
 static void edge_bulk_out_cmd_callback	(struct urb *urb);
 
 /* function prototypes for the usbserial callbacks */
-static int  edge_open			(struct usb_serial_port *port, struct file *filp);
-static void edge_close			(struct usb_serial_port *port, struct file *filp);
-static int  edge_write			(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  edge_write_room		(struct usb_serial_port *port);
-static int  edge_chars_in_buffer	(struct usb_serial_port *port);
-static void edge_throttle		(struct usb_serial_port *port);
-static void edge_unthrottle		(struct usb_serial_port *port);
-static void edge_set_termios		(struct usb_serial_port *port, struct ktermios *old_termios);
-static int  edge_ioctl			(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
-static void edge_break			(struct usb_serial_port *port, int break_state);
-static int  edge_tiocmget		(struct usb_serial_port *port, struct file *file);
-static int  edge_tiocmset		(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
+static int  edge_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void edge_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  edge_write			(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  edge_write_room		(struct tty_struct *tty);
+static int  edge_chars_in_buffer	(struct tty_struct *tty);
+static void edge_throttle		(struct tty_struct *tty);
+static void edge_unthrottle		(struct tty_struct *tty);
+static void edge_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios);
+static int  edge_ioctl			(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static void edge_break			(struct tty_struct *tty, int break_state);
+static int  edge_tiocmget		(struct tty_struct *tty, struct file *file);
+static int  edge_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
 static int  edge_startup		(struct usb_serial *serial);
 static void edge_shutdown		(struct usb_serial *serial);
 
@@ -233,7 +233,8 @@ static void handle_new_lsr		(struct edgeport_port *edge_port, __u8 lsrData, __u8
 static int  send_iosp_ext_cmd		(struct edgeport_port *edge_port, __u8 command, __u8 param);
 static int  calc_baud_rate_divisor	(int baud_rate, int *divisor);
 static int  send_cmd_write_baud_rate	(struct edgeport_port *edge_port, int baudRate);
-static void change_port_settings	(struct edgeport_port *edge_port, struct ktermios *old_termios);
+static void change_port_settings	(struct tty_struct *tty, struct edgeport_port *edge_port,
+					 struct ktermios *old_termios);
 static int  send_cmd_write_uart_register	(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue);
 static int  write_cmd_usb		(struct edgeport_port *edge_port, unsigned char *buffer, int writeLength);
 static void send_more_port_data		(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port);
@@ -639,8 +640,8 @@ static void edge_interrupt_callback (struct urb *urb)
 					dbg("%s - txcredits for port%d = %d", __func__, portNumber, edge_port->txCredits);
 
 					/* tell the tty driver that something has changed */
-					if (edge_port->port->tty)
-						tty_wakeup(edge_port->port->tty);
+					if (edge_port->port->port.tty)
+						tty_wakeup(edge_port->port->port.tty);
 
 					// Since we have more credit, check if more data can be sent
 					send_more_port_data(edge_serial, edge_port);
@@ -737,7 +738,7 @@ static void edge_bulk_out_data_callback (struct urb *urb)
 		    __func__, status);
 	}
 
-	tty = edge_port->port->tty;
+	tty = edge_port->port->port.tty;
 
 	if (tty && edge_port->open) {
 		/* let the tty driver wakeup if it has a special write_wakeup function */
@@ -781,7 +782,7 @@ static void edge_bulk_out_cmd_callback (struct urb *urb)
 	}
 
 	/* Get pointer to tty */
-	tty = edge_port->port->tty;
+	tty = edge_port->port->port.tty;
 
 	/* tell the tty driver that something has changed */
 	if (tty && edge_port->open)
@@ -803,7 +804,8 @@ static void edge_bulk_out_cmd_callback (struct urb *urb)
  *	If successful, we return 0
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_open (struct usb_serial_port *port, struct file * filp)
+static int edge_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct usb_serial *serial;
@@ -815,16 +817,15 @@ static int edge_open (struct usb_serial_port *port, struct file * filp)
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	if (port->tty)
-		port->tty->low_latency = low_latency;
+	if (tty)
+		tty->low_latency = low_latency;
 
 	/* see if we've set up our endpoint info yet (can't set it up in edge_startup
 	   as the structures were not set up at that time.) */
 	serial = port->serial;
 	edge_serial = usb_get_serial_data(serial);
-	if (edge_serial == NULL) {
+	if (edge_serial == NULL)
 		return -ENODEV;
-	}
 	if (edge_serial->interrupt_in_buffer == NULL) {
 		struct usb_serial_port *port0 = serial->port[0];
 		
@@ -908,7 +909,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp)
 
 	if (!edge_port->txfifo.fifo) {
 		dbg("%s - no memory", __func__);
-		edge_close (port, filp);
+		edge_close (tty, port, filp);
 		return -ENOMEM;
 	}
 
@@ -918,7 +919,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp)
 
 	if (!edge_port->write_urb) {
 		dbg("%s - no memory", __func__);
-		edge_close (port, filp);
+		edge_close (tty, port, filp);
 		return -ENOMEM;
 	}
 
@@ -1038,7 +1039,8 @@ static void block_until_tx_empty (struct edgeport_port *edge_port)
  * edge_close
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
-static void edge_close (struct usb_serial_port *port, struct file * filp)
+static void edge_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
@@ -1106,7 +1108,8 @@ static void edge_close (struct usb_serial_port *port, struct file * filp)
  *	If successful, we return the number of bytes written, otherwise we return
  *	a negative error number.
  *****************************************************************************/
-static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count)
+static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *data, int count)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct TxFifo *fifo;
@@ -1308,8 +1311,9 @@ exit_send:
  *	(the txCredits), 
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_write_room (struct usb_serial_port *port)
+static int edge_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int room;
 	unsigned long flags;
@@ -1347,8 +1351,9 @@ static int edge_write_room (struct usb_serial_port *port)
  *	system, 
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_chars_in_buffer (struct usb_serial_port *port)
+static int edge_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int num_chars;
 	unsigned long flags;
@@ -1381,10 +1386,10 @@ static int edge_chars_in_buffer (struct usb_serial_port *port)
  *	this function is called by the tty driver when it wants to stop the data
  *	being read from the port.
  *****************************************************************************/
-static void edge_throttle (struct usb_serial_port *port)
+static void edge_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1397,16 +1402,10 @@ static void edge_throttle (struct usb_serial_port *port)
 		return;
 	}
 
-	tty = port->tty;
-	if (!tty) {
-		dbg ("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
-		status = edge_write (port, &stop_char, 1);
+		status = edge_write (tty, port, &stop_char, 1);
 		if (status <= 0) {
 			return;
 		}
@@ -1430,10 +1429,10 @@ static void edge_throttle (struct usb_serial_port *port)
  *	this function is called by the tty driver when it wants to resume the data
  *	being read from the port (called after SerialThrottle is called)
  *****************************************************************************/
-static void edge_unthrottle (struct usb_serial_port *port)
+static void edge_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1446,31 +1445,18 @@ static void edge_unthrottle (struct usb_serial_port *port)
 		return;
 	}
 
-	tty = port->tty;
-	if (!tty) {
-		dbg ("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
 		unsigned char start_char = START_CHAR(tty);
-		status = edge_write (port, &start_char, 1);
-		if (status <= 0) {
+		status = edge_write(tty, port, &start_char, 1);
+		if (status <= 0)
 			return;
-		}
 	}
-
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		edge_port->shadowMCR |= MCR_RTS;
-		status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
-		if (status != 0) {
-			return;
-		}
+		send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
 	}
-
-	return;
 }
 
 
@@ -1478,11 +1464,10 @@ static void edge_unthrottle (struct usb_serial_port *port)
  * SerialSetTermios
  *	this function is called by the tty driver when it wants to change the termios structure
  *****************************************************************************/
-static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
+static void edge_set_termios(struct tty_struct *tty,
+	struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	/* FIXME: This function appears unused ?? */
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned int cflag;
 
 	cflag = tty->termios->c_cflag;
@@ -1502,9 +1487,7 @@ static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old
 	}
 
 	/* change the port settings to the new ones specified */
-	change_port_settings (edge_port, old_termios);
-
-	return;
+	change_port_settings(tty, edge_port, old_termios);
 }
 
 
@@ -1536,25 +1519,9 @@ static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *va
 	return 0;
 }
 
-static int get_number_bytes_avail(struct edgeport_port *edge_port, unsigned int __user *value)
-{
-	unsigned int result = 0;
-	struct tty_struct *tty = edge_port->port->tty;
-
-	if (!tty)
-		return -ENOIOCTLCMD;
-
-	result = tty->read_cnt;
-
-	dbg("%s(%d) = %d", __func__,  edge_port->port->number, result);
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	//return 0;
-	return -ENOIOCTLCMD;
-}
-
-static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear)
+static int edge_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int mcr;
 
@@ -1582,8 +1549,9 @@ static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsig
 	return 0;
 }
 
-static int edge_tiocmget(struct usb_serial_port *port, struct file *file)
+static int edge_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int result = 0;
 	unsigned int msr;
@@ -1624,9 +1592,6 @@ static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
 	tmp.closing_wait	= 30*HZ;
-//	tmp.custom_divisor	= state->custom_divisor;
-//	tmp.hub6		= state->hub6;
-//	tmp.io_type		= state->io_type;
 
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -1639,8 +1604,10 @@ static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct
  * SerialIoctl
  *	this function handles any ioctl calls to the driver
  *****************************************************************************/
-static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
+static int edge_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	DEFINE_WAIT(wait);
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct async_icount cnow;
@@ -1650,25 +1617,14 @@ static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned
 	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
 
 	switch (cmd) {
-		// return number of bytes available
-		case TIOCINQ:
-			dbg("%s (%d) TIOCINQ", __func__,  port->number);
-			return get_number_bytes_avail(edge_port, (unsigned int __user *) arg);
-			break;
-
 		case TIOCSERGETLSR:
 			dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
 			return get_lsr_info(edge_port, (unsigned int __user *) arg);
-			return 0;
 
 		case TIOCGSERIAL:
 			dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
 			return get_serial_info(edge_port, (struct serial_struct __user *) arg);
 
-		case TIOCSSERIAL:
-			dbg("%s (%d) TIOCSSERIAL", __func__,  port->number);
-			break;
-
 		case TIOCMIWAIT:
 			dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
 			cprev = edge_port->icount;
@@ -1723,8 +1679,9 @@ static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned
  * SerialBreak
  *	this function sends a break to the port
  *****************************************************************************/
-static void edge_break (struct usb_serial_port *port, int break_state)
+static void edge_break (struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
 	int status;
@@ -1866,7 +1823,7 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha
 					port = edge_serial->serial->port[edge_serial->rxPort];
 					edge_port = usb_get_serial_port_data(port);
 					if (edge_port->open) {
-						tty = edge_port->port->tty;
+						tty = edge_port->port->port.tty;
 						if (tty) {
 							dbg("%s - Sending %d bytes to TTY for port %d", __func__, rxLen, edge_serial->rxPort);
 							edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
@@ -1941,8 +1898,9 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
 		handle_new_msr (edge_port, byte2);
 
 		/* send the current line settings to the port so we are in sync with any further termios calls */
-		if (edge_port->port->tty)
-			change_port_settings (edge_port, edge_port->port->tty->termios);
+		/* FIXME: locking on tty */
+		if (edge_port->port->port.tty)
+			change_port_settings(edge_port->port->port.tty, edge_port, edge_port->port->port.tty->termios);
 
 		/* we have completed the open */
 		edge_port->openPending = false;
@@ -2078,8 +2036,8 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 l
 	}
 
 	/* Place LSR data byte into Rx buffer */
-	if (lsrData && edge_port->port->tty)
-		edge_tty_recv(&edge_port->port->dev, edge_port->port->tty, &data, 1);
+	if (lsrData && edge_port->port->port.tty)
+		edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
 
 	/* update input line counters */
 	icount = &edge_port->icount;
@@ -2473,13 +2431,11 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
  *	This routine is called to set the UART on the device to match the specified
  *	new settings.
  *****************************************************************************/
-#ifndef CMSPAR
-#define CMSPAR 0
-#endif
-static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios)
+
+static void change_port_settings(struct tty_struct *tty,
+	struct edgeport_port *edge_port, struct ktermios *old_termios)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
-	struct tty_struct *tty;
 	int baud;
 	unsigned cflag;
 	__u8 mask = 0xff;
@@ -2498,13 +2454,6 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi
 		return;
 	}
 
-	tty = edge_port->port->tty;
-	if ((!tty) ||
-	    (!tty->termios)) {
-		dbg("%s - no tty structures", __func__);
-		return;
-	}
-
 	cflag = tty->termios->c_cflag;
 
 	switch (cflag & CSIZE) {
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index a58822a14a8..7cf383a2a55 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -243,9 +243,9 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
 static void stop_read(struct edgeport_port *edge_port);
 static int restart_read(struct edgeport_port *edge_port);
 
-static void edge_set_termios(struct usb_serial_port *port,
-			     struct ktermios *old_termios);
-static void edge_send(struct usb_serial_port *port);
+static void edge_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios);
+static void edge_send(struct tty_struct *tty);
 
 /* sysfs attributes */
 static int edge_create_sysfs_attrs(struct usb_serial_port *port);
@@ -572,7 +572,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 								int flush)
 {
 	int baud_rate;
-	struct tty_struct *tty = port->port->tty;
+	struct tty_struct *tty = port->port->port.tty;
 	wait_queue_t wait;
 	unsigned long flags;
 
@@ -1554,7 +1554,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 	/* Save the new modem status */
 	edge_port->shadow_msr = msr & 0xf0;
 
-	tty = edge_port->port->tty;
+	tty = edge_port->port->port.tty;
 	/* handle CTS flow control */
 	if (tty && C_CRTSCTS(tty)) {
 		if (msr & EDGEPORT_MSR_CTS) {
@@ -1587,9 +1587,8 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
 		new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
 
 	/* Place LSR data byte into Rx buffer */
-	if (lsr_data && edge_port->port->tty)
-		edge_tty_recv(&edge_port->port->dev, edge_port->port->tty,
-								&data, 1);
+	if (lsr_data && edge_port->port->port.tty)
+		edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
 
 	/* update input line counters */
 	icount = &edge_port->icount;
@@ -1750,7 +1749,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 		++data;
 	}
 
-	tty = edge_port->port->tty;
+	tty = edge_port->port->port.tty;
 	if (tty && urb->actual_length) {
 		usb_serial_debug_data(debug, &edge_port->port->dev,
 					__func__, urb->actual_length, data);
@@ -1819,10 +1818,11 @@ static void edge_bulk_out_callback(struct urb *urb)
 	}
 
 	/* send any buffered data */
-	edge_send(port);
+	edge_send(port->port.tty);
 }
 
-static int edge_open(struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct edgeport_serial *edge_serial;
@@ -1838,7 +1838,8 @@ static int edge_open(struct usb_serial_port *port, struct file *filp)
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	port->tty->low_latency = low_latency;
+	if (tty)
+		tty->low_latency = low_latency;
 
 	port_number = port->number - port->serial->minor;
 	switch (port_number) {
@@ -1874,7 +1875,8 @@ static int edge_open(struct usb_serial_port *port, struct file *filp)
 	}
 
 	/* set up the port settings */
-	edge_set_termios(port, port->tty->termios);
+	if (tty)
+		edge_set_termios(tty, port, port->port.tty->termios);
 
 	/* open up the port */
 
@@ -2000,7 +2002,8 @@ release_es_lock:
 	return status;
 }
 
-static void edge_close(struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
@@ -2048,8 +2051,8 @@ static void edge_close(struct usb_serial_port *port, struct file *filp)
 	dbg("%s - exited", __func__);
 }
 
-static int edge_write(struct usb_serial_port *port, const unsigned char *data,
-								int count)
+static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
+				const unsigned char *data, int count)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -2070,16 +2073,16 @@ static int edge_write(struct usb_serial_port *port, const unsigned char *data,
 	count = edge_buf_put(edge_port->ep_out_buf, data, count);
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
-	edge_send(port);
+	edge_send(tty);
 
 	return count;
 }
 
-static void edge_send(struct usb_serial_port *port)
+static void edge_send(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int count, result;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned long flags;
 
 
@@ -2133,8 +2136,9 @@ static void edge_send(struct usb_serial_port *port)
 		tty_wakeup(tty);
 }
 
-static int edge_write_room(struct usb_serial_port *port)
+static int edge_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -2154,8 +2158,9 @@ static int edge_write_room(struct usb_serial_port *port)
 	return room;
 }
 
-static int edge_chars_in_buffer(struct usb_serial_port *port)
+static int edge_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -2175,10 +2180,10 @@ static int edge_chars_in_buffer(struct usb_serial_port *port)
 	return chars;
 }
 
-static void edge_throttle(struct usb_serial_port *port)
+static void edge_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -2189,11 +2194,10 @@ static void edge_throttle(struct usb_serial_port *port)
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
-		status = edge_write(port, &stop_char, 1);
-		if (status <= 0)
-			dev_err(&port->dev,
-				"%s - failed to write stop character, %d\n",
-							__func__, status);
+		status = edge_write(tty, port, &stop_char, 1);
+		if (status <= 0) {
+			dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
+		}
 	}
 
 	/* if we are implementing RTS/CTS, stop reads */
@@ -2203,10 +2207,10 @@ static void edge_throttle(struct usb_serial_port *port)
 
 }
 
-static void edge_unthrottle(struct usb_serial_port *port)
+static void edge_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -2217,11 +2221,10 @@ static void edge_unthrottle(struct usb_serial_port *port)
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
 		unsigned char start_char = START_CHAR(tty);
-		status = edge_write(port, &start_char, 1);
-		if (status <= 0)
-			dev_err(&port->dev,
-				"%s - failed to write start character, %d\n",
-							__func__, status);
+		status = edge_write(tty, port, &start_char, 1);
+		if (status <= 0) {
+			dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
+		}
 	}
 	/* if we are implementing RTS/CTS, restart reads */
 	/* are the Edgeport will assert the RTS line */
@@ -2271,11 +2274,10 @@ static int restart_read(struct edgeport_port *edge_port)
 	return status;
 }
 
-static void change_port_settings(struct edgeport_port *edge_port,
-						struct ktermios *old_termios)
+static void change_port_settings(struct tty_struct *tty,
+		struct edgeport_port *edge_port, struct ktermios *old_termios)
 {
 	struct ump_uart_config *config;
-	struct tty_struct *tty;
 	int baud;
 	unsigned cflag;
 	int status;
@@ -2284,9 +2286,7 @@ static void change_port_settings(struct edgeport_port *edge_port,
 
 	dbg("%s - port %d", __func__, edge_port->port->number);
 
-	tty = edge_port->port->tty;
-
-	config = kmalloc(sizeof(*config), GFP_KERNEL);
+	config = kmalloc (sizeof (*config), GFP_KERNEL);
 	if (!config) {
 		*tty->termios = *old_termios;
 		dev_err(&edge_port->port->dev, "%s - out of memory\n",
@@ -2419,11 +2419,13 @@ static void change_port_settings(struct edgeport_port *edge_port,
 	return;
 }
 
-static void edge_set_termios(struct usb_serial_port *port,
-					struct ktermios *old_termios)
+static void edge_set_termios(struct tty_struct *tty, 
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
+	unsigned int cflag;
+
+	cflag = tty->termios->c_cflag;
 
 	dbg("%s - clfag %08x iflag %08x", __func__,
 	    tty->termios->c_cflag, tty->termios->c_iflag);
@@ -2434,12 +2436,14 @@ static void edge_set_termios(struct usb_serial_port *port,
 	if (edge_port == NULL)
 		return;
 	/* change the port settings to the new ones specified */
-	change_port_settings(edge_port, old_termios);
+	change_port_settings(tty, edge_port, old_termios);
+	return;
 }
 
-static int edge_tiocmset(struct usb_serial_port *port, struct file *file,
+static int edge_tiocmset(struct tty_struct *tty, struct file *file,
 					unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int mcr;
 	unsigned long flags;
@@ -2469,8 +2473,9 @@ static int edge_tiocmset(struct usb_serial_port *port, struct file *file,
 	return 0;
 }
 
-static int edge_tiocmget(struct usb_serial_port *port, struct file *file)
+static int edge_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int result = 0;
 	unsigned int msr;
@@ -2522,9 +2527,10 @@ static int get_serial_info(struct edgeport_port *edge_port,
 	return 0;
 }
 
-static int edge_ioctl(struct usb_serial_port *port, struct file *file,
+static int edge_ioctl(struct tty_struct *tty, struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct async_icount cnow;
 	struct async_icount cprev;
@@ -2569,18 +2575,19 @@ static int edge_ioctl(struct usb_serial_port *port, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static void edge_break(struct usb_serial_port *port, int on)
+static void edge_break(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int status;
 	int bv = 0;	/* Off */
 
-	dbg("%s - state = %d", __func__, on);
+	dbg("%s - state = %d", __func__, break_state);
 
 	/* chase the port close */
 	chase_port(edge_port, 0, 0);
 
-	if (on == -1)
+	if (break_state == -1)
 		bv = 1;	/* On */
 	status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv);
 	if (status)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 80d9ec5570d..a7784642d6a 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -74,19 +74,21 @@ static int connect_retries = KP_RETRIES;
 static int initial_wait;
 
 /* Function prototypes for an ipaq */
-static int  ipaq_open (struct usb_serial_port *port, struct file *filp);
-static void ipaq_close (struct usb_serial_port *port, struct file *filp);
-static int  ipaq_startup (struct usb_serial *serial);
-static void ipaq_shutdown (struct usb_serial *serial);
-static int ipaq_write(struct usb_serial_port *port, const unsigned char *buf,
-		       int count);
+static int  ipaq_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void ipaq_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static int  ipaq_startup(struct usb_serial *serial);
+static void ipaq_shutdown(struct usb_serial *serial);
+static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
 static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *buf,
-			   int count);
+			int count);
 static void ipaq_write_gather(struct usb_serial_port *port);
 static void ipaq_read_bulk_callback (struct urb *urb);
 static void ipaq_write_bulk_callback(struct urb *urb);
-static int ipaq_write_room(struct usb_serial_port *port);
-static int ipaq_chars_in_buffer(struct usb_serial_port *port);
+static int ipaq_write_room(struct tty_struct *tty);
+static int ipaq_chars_in_buffer(struct tty_struct *tty);
 static void ipaq_destroy_lists(struct usb_serial_port *port);
 
 
@@ -591,7 +593,8 @@ static spinlock_t	write_list_lock;
 static int		bytes_in;
 static int		bytes_out;
 
-static int ipaq_open(struct usb_serial_port *port, struct file *filp)
+static int ipaq_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial	*serial = port->serial;
 	struct ipaq_private	*priv;
@@ -637,10 +640,12 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
 	 * discipline instead of queueing.
 	 */
 
-	port->tty->low_latency = 1;
-	port->tty->raw = 1;
-	port->tty->real_raw = 1;
-
+	if (tty) {
+		tty->low_latency = 1;
+		/* FIXME: These two are bogus */
+		tty->raw = 1;
+		tty->real_raw = 1;
+	}
 	/*
 	 * Lose the small buffers usbserial provides. Make larger ones.
 	 */
@@ -714,7 +719,8 @@ error:
 }
 
 
-static void ipaq_close(struct usb_serial_port *port, struct file *filp)
+static void ipaq_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 
@@ -751,7 +757,7 @@ static void ipaq_read_bulk_callback(struct urb *urb)
 
 	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
@@ -770,8 +776,8 @@ static void ipaq_read_bulk_callback(struct urb *urb)
 	return;
 }
 
-static int ipaq_write(struct usb_serial_port *port, const unsigned char *buf,
-		       int count)
+static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count)
 {
 	const unsigned char	*current_position = buf;
 	int			bytes_sent = 0;
@@ -905,16 +911,18 @@ static void ipaq_write_bulk_callback(struct urb *urb)
 	usb_serial_port_softint(port);
 }
 
-static int ipaq_write_room(struct usb_serial_port *port)
+static int ipaq_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 
 	dbg("%s - freelen %d", __func__, priv->free_len);
 	return priv->free_len;
 }
 
-static int ipaq_chars_in_buffer(struct usb_serial_port *port)
+static int ipaq_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 
 	dbg("%s - queuelen %d", __func__, priv->queue_len);
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index bc85ca5c1c3..a89ebfe9e91 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -179,7 +179,7 @@ static void ipw_read_bulk_callback(struct urb *urb)
 
 	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
@@ -199,7 +199,8 @@ static void ipw_read_bulk_callback(struct urb *urb)
 	return;
 }
 
-static int ipw_open(struct usb_serial_port *port, struct file *filp)
+static int ipw_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_device *dev = port->serial->dev;
 	u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
@@ -212,8 +213,8 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 	if (!buf_flow_init)
 		return -ENOMEM;
 
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* --1: Tell the modem to initialize (we think) From sniffs this is always the
 	 * first thing that gets sent to the modem during opening of the device */
@@ -301,7 +302,8 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 	return 0;
 }
 
-static void ipw_close(struct usb_serial_port *port, struct file * filp)
+static void ipw_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct usb_device *dev = port->serial->dev;
 	int result;
@@ -384,7 +386,8 @@ static void ipw_write_bulk_callback(struct urb *urb)
 	usb_serial_port_softint(port);
 }
 
-static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct usb_device *dev = port->serial->dev;
 	int ret;
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 0063c11c808..e59155c6607 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -85,15 +85,17 @@ static int buffer_size;
 /* if overridden by the user, then use the specified number of XBOFs */
 static int xbof = -1;
 
-static int ir_startup(struct usb_serial *serial);
-static int ir_open(struct usb_serial_port *port, struct file *filep);
-static void ir_close(struct usb_serial_port *port, struct file *filep);
-static int ir_write(struct usb_serial_port *port,
-		const unsigned char *buf, int count);
-static void ir_write_bulk_callback(struct urb *urb);
-static void ir_read_bulk_callback(struct urb *urb);
-static void ir_set_termios(struct usb_serial_port *port,
-		struct ktermios *old_termios);
+static int  ir_startup (struct usb_serial *serial);
+static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filep);
+static void ir_close(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filep);
+static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count);
+static void ir_write_bulk_callback (struct urb *urb);
+static void ir_read_bulk_callback (struct urb *urb);
+static void ir_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios);
 
 /* Not that this lot means you can only have one per system */
 static u8 ir_baud;
@@ -295,7 +297,8 @@ static int ir_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static int ir_open(struct usb_serial_port *port, struct file *filp)
+static int ir_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	char *buffer;
 	int result = 0;
@@ -343,7 +346,8 @@ static int ir_open(struct usb_serial_port *port, struct file *filp)
 	return result;
 }
 
-static void ir_close(struct usb_serial_port *port, struct file *filp)
+static void ir_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -351,8 +355,8 @@ static void ir_close(struct usb_serial_port *port, struct file *filp)
 	usb_kill_urb(port->read_urb);
 }
 
-static int ir_write(struct usb_serial_port *port,
-		const unsigned char *buf, int count)
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	unsigned char *transfer_buffer;
 	int result;
@@ -360,11 +364,6 @@ static int ir_write(struct usb_serial_port *port,
 
 	dbg("%s - port = %d, count = %d", __func__, port->number, count);
 
-	if (!port->tty) {
-		dev_err(&port->dev, "%s - no tty???\n", __func__);
-		return 0;
-	}
-
 	if (count == 0)
 		return 0;
 
@@ -450,14 +449,13 @@ static void ir_read_bulk_callback(struct urb *urb)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port->open_count) {
+	if (!port->port.count) {
 		dbg("%s - port closed.", __func__);
 		return;
 	}
 
 	switch (status) {
 	case 0: /* Successful */
-
 		/*
 		 * The first byte of the packet we get from the device
 		 * contains a busy indicator and baud rate change.
@@ -465,19 +463,11 @@ static void ir_read_bulk_callback(struct urb *urb)
 		 */
 		if ((*data & 0x0f) > 0)
 			ir_baud = *data & 0x0f;
-
-		usb_serial_debug_data(
-			debug,
-			&port->dev,
-			__func__,
-			urb->actual_length,
-			data);
-
-		tty = port->tty;
-
+		usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
+ 		tty = port->port.tty;
 		if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
-			tty_insert_flip_string(tty, data + 1,
-					urb->actual_length - 1);
+			tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
 			tty_flip_buffer_push(tty);
 		}
 
@@ -488,11 +478,10 @@ static void ir_read_bulk_callback(struct urb *urb)
 		 */
 
 	case -EPROTO: /* taking inspiration from pl2303.c */
-
-		/* Continue trying to always read */
+			/* Continue trying to always read */
 		usb_fill_bulk_urb(
 			port->read_urb,
-			port->serial->dev,
+			port->serial->dev, 
 			usb_rcvbulkpipe(port->serial->dev,
 				port->bulk_in_endpointAddress),
 			port->read_urb->transfer_buffer,
@@ -502,23 +491,19 @@ static void ir_read_bulk_callback(struct urb *urb)
 
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
-			dev_err(&port->dev,
-				"%s - failed resubmitting read urb, error %d\n",
+			dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
 				__func__, result);
-		break;
-
+			break ;
 	default:
 		dbg("%s - nonzero read bulk status received: %d",
-			__func__,
-			status);
-		break;
+			__func__, status);
+		break ;
 	}
-
 	return;
 }
 
-static void ir_set_termios(struct usb_serial_port *port,
-		struct ktermios *old_termios)
+static void ir_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned char *transfer_buffer;
 	int result;
@@ -527,7 +512,7 @@ static void ir_set_termios(struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 
 	/*
 	 * FIXME, we should compare the baud request against the
@@ -600,8 +585,8 @@ static void ir_set_termios(struct usb_serial_port *port,
 				__func__, result);
 
 	/* Only speed changes are supported */
-	tty_termios_copy_hw(port->tty->termios, old_termios);
-	tty_encode_baud_rate(port->tty, baud, baud);
+	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_encode_baud_rate(tty, baud, baud);
 }
 
 static int __init ir_init(void)
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index a01e987c7d3..d6541488834 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -144,9 +144,10 @@ static void iuu_shutdown(struct usb_serial *serial)
 	}
 }
 
-static int iuu_tiocmset(struct usb_serial_port *port, struct file *file,
+static int iuu_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -171,8 +172,9 @@ static int iuu_tiocmset(struct usb_serial_port *port, struct file *file,
  * When no card , the reader respond with TIOCM_CD
  * This is known as CD autodetect mechanism
  */
-static int iuu_tiocmget(struct usb_serial_port *port, struct file *file)
+static int iuu_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	int rc;
@@ -630,7 +632,7 @@ static void read_buf_callback(struct urb *urb)
 	}
 
 	dbg("%s - %i chars to write", __func__, urb->actual_length);
-	tty = port->tty;
+	tty = port->port.tty;
 	if (data == NULL)
 		dbg("%s - data is NULL !!!", __func__);
 	if (tty && urb->actual_length && data) {
@@ -752,11 +754,10 @@ static void iuu_uart_read_callback(struct urb *urb)
 	/* if nothing to write call again rxcmd */
 	dbg("%s - rxcmd recall", __func__);
 	iuu_led_activity_off(urb);
-	return;
 }
 
-static int iuu_uart_write(struct usb_serial_port *port, const u8 *buf,
-			  int count)
+static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const u8 *buf, int count)
 {
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -948,7 +949,8 @@ static int set_control_lines(struct usb_device *dev, u8 value)
 	return 0;
 }
 
-static void iuu_close(struct usb_serial_port *port, struct file *filp)
+static void iuu_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	/* iuu_led (port,255,0,0,0); */
 	struct usb_serial *serial;
@@ -964,8 +966,8 @@ static void iuu_close(struct usb_serial_port *port, struct file *filp)
 
 	iuu_uart_off(port);
 	if (serial->dev) {
-		if (port->tty) {
-			c_cflag = port->tty->termios->c_cflag;
+		if (tty) {
+			c_cflag = tty->termios->c_cflag;
 			if (c_cflag & HUPCL) {
 				/* drop DTR and RTS */
 				priv = usb_get_serial_port_data(port);
@@ -989,7 +991,8 @@ static void iuu_close(struct usb_serial_port *port, struct file *filp)
 	}
 }
 
-static int iuu_open(struct usb_serial_port *port, struct file *filp)
+static int iuu_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	u8 *buf;
@@ -1036,15 +1039,17 @@ static int iuu_open(struct usb_serial_port *port, struct file *filp)
 
 	/* set the termios structure */
 	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
-						| TIOCM_CTS | CSTOPB | PARENB;
-		port->tty->termios->c_lflag = 0;
-		port->tty->termios->c_oflag = 0;
-		port->tty->termios->c_iflag = 0;
+	if (tty && !priv->termios_initialized) {
+		*(tty->termios) = tty_std_termios;
+		tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+					| TIOCM_CTS | CSTOPB | PARENB;
+		tty->termios->c_ispeed = 9600;
+		tty->termios->c_ospeed = 9600;
+		tty->termios->c_lflag = 0;
+		tty->termios->c_oflag = 0;
+		tty->termios->c_iflag = 0;
 		priv->termios_initialized = 1;
-		port->tty->low_latency = 1;
+		tty->low_latency = 1;
 		priv->poll = 0;
 	 }
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -1148,7 +1153,7 @@ static int iuu_open(struct usb_serial_port *port, struct file *filp)
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		iuu_close(port, NULL);
+		iuu_close(tty, port, NULL);
 		return -EPROTO;
 	} else {
 		dbg("%s - rxcmd OK", __func__);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 11e439b90ea..a371c41bb3a 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -244,20 +244,9 @@ static void __exit keyspan_exit (void)
 module_init(keyspan_init);
 module_exit(keyspan_exit);
 
-static void keyspan_rx_throttle (struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-}
-
-
-static void keyspan_rx_unthrottle (struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-}
-
-
-static void keyspan_break_ctl (struct usb_serial_port *port, int break_state)
+static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_port_private 	*p_priv;
 
  	dbg("%s", __func__);
@@ -273,14 +262,13 @@ static void keyspan_break_ctl (struct usb_serial_port *port, int break_state)
 }
 
 
-static void keyspan_set_termios (struct usb_serial_port *port, 
-				     struct ktermios *old_termios)
+static void keyspan_set_termios (struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	int				baud_rate, device_port;
 	struct keyspan_port_private 	*p_priv;
 	const struct keyspan_device_details	*d_details;
 	unsigned int 			cflag;
-	struct tty_struct		*tty = port->tty;
 
 	dbg("%s", __func__);
 
@@ -312,12 +300,11 @@ static void keyspan_set_termios (struct usb_serial_port *port,
 	keyspan_send_setup(port, 0);
 }
 
-static int keyspan_tiocmget(struct usb_serial_port *port, struct file *file)
+static int keyspan_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
 	unsigned int			value;
-	struct keyspan_port_private 	*p_priv;
-
-	p_priv = usb_get_serial_port_data(port);
 	
 	value = ((p_priv->rts_state) ? TIOCM_RTS : 0) |
 		((p_priv->dtr_state) ? TIOCM_DTR : 0) |
@@ -329,18 +316,16 @@ static int keyspan_tiocmget(struct usb_serial_port *port, struct file *file)
 	return value;
 }
 
-static int keyspan_tiocmset(struct usb_serial_port *port, struct file *file,
+static int keyspan_tiocmset(struct tty_struct *tty, struct file *file,
 			    unsigned int set, unsigned int clear)
 {
-	struct keyspan_port_private 	*p_priv;
-
-	p_priv = usb_get_serial_port_data(port);
+	struct usb_serial_port *port = tty->driver_data;
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
 	
 	if (set & TIOCM_RTS)
 		p_priv->rts_state = 1;
 	if (set & TIOCM_DTR)
 		p_priv->dtr_state = 1;
-
 	if (clear & TIOCM_RTS)
 		p_priv->rts_state = 0;
 	if (clear & TIOCM_DTR)
@@ -349,16 +334,10 @@ static int keyspan_tiocmset(struct usb_serial_port *port, struct file *file,
 	return 0;
 }
 
-static int keyspan_ioctl(struct usb_serial_port *port, struct file *file,
-			     unsigned int cmd, unsigned long arg)
-{
-	return -ENOIOCTLCMD;
-}
-
-	/* Write function is similar for the four protocols used
-	   with only a minor change for usa90 (usa19hs) required */
-static int keyspan_write(struct usb_serial_port *port, 
-			 const unsigned char *buf, int count)
+/* Write function is similar for the four protocols used
+   with only a minor change for usa90 (usa19hs) required */
+static int keyspan_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct keyspan_port_private 	*p_priv;
 	const struct keyspan_device_details	*d_details;
@@ -448,7 +427,7 @@ static void	usa26_indat_callback(struct urb *urb)
 	}
 
 	port =  urb->context;
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
@@ -479,7 +458,7 @@ static void	usa26_indat_callback(struct urb *urb)
 				
 		/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->open_count)
+	if (port->port.count)
 		if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
 			dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 		}
@@ -496,7 +475,7 @@ static void	usa2x_outdat_callback(struct urb *urb)
 	p_priv = usb_get_serial_port_data(port);
 	dbg ("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
 
-	if (port->open_count)
+	if (port->port.count)
 		usb_serial_port_softint(port);
 }
 
@@ -567,10 +546,10 @@ static void	usa26_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -619,7 +598,7 @@ static void usa28_indat_callback(struct urb *urb)
 		p_priv = usb_get_serial_port_data(port);
 		data = urb->transfer_buffer;
 
-		tty = port->tty;
+		tty = port->port.tty;
 		if (urb->actual_length) {
 			for (i = 0; i < urb->actual_length ; ++i) {
 				tty_insert_flip_char(tty, data[i], 0);
@@ -629,7 +608,7 @@ static void usa28_indat_callback(struct urb *urb)
 
 		/* Resubmit urb so we continue receiving */
 		urb->dev = port->serial->dev;
-		if (port->open_count)
+		if (port->port.count)
 			if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
 				dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 			}
@@ -704,10 +683,10 @@ static void	usa28_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -797,10 +776,10 @@ static void	usa49_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -839,7 +818,7 @@ static void	usa49_indat_callback(struct urb *urb)
 	}
 
 	port =  urb->context;
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
@@ -866,7 +845,7 @@ static void	usa49_indat_callback(struct urb *urb)
 				
 		/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->open_count)
+	if (port->port.count)
 		if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
 			dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 		}
@@ -904,7 +883,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 				return;
 			}
 			port = serial->port[data[i++]];
-			tty = port->tty;
+			tty = port->port.tty;
 			len = data[i++];
 
 			/* 0x80 bit is error flag */
@@ -912,7 +891,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 				/* no error on any byte */
 				i++;
 				for (x = 1; x < len ; ++x)
-					if (port->open_count)
+					if (port->port.count)
 						tty_insert_flip_char(tty,
 								data[i++], 0);
 					else
@@ -930,13 +909,13 @@ static void usa49wg_indat_callback(struct urb *urb)
 					if (stat & RXERROR_PARITY)
 						flag |= TTY_PARITY;
 					/* XXX should handle break (0x10) */
-					if (port->open_count)
+					if (port->port.count)
 						tty_insert_flip_char(tty,
 							data[i+1], flag);
 					i += 2;
 				}
 			}
-			if (port->open_count)
+			if (port->port.count)
 				tty_flip_buffer_push(tty);
 		}
 	}
@@ -978,7 +957,7 @@ static void usa90_indat_callback(struct urb *urb)
 	port =  urb->context;
 	p_priv = usb_get_serial_port_data(port);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (urb->actual_length) {
 	
 		/* if current mode is DMA, looks like usa28 format
@@ -1021,7 +1000,7 @@ static void usa90_indat_callback(struct urb *urb)
 				
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->open_count)
+	if (port->port.count)
 		if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
 			dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 		}
@@ -1064,10 +1043,10 @@ static void	usa90_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -1139,10 +1118,10 @@ static void	usa67_instat_callback(struct urb *urb)
 	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
 	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -1177,8 +1156,9 @@ static void usa67_glocont_callback(struct urb *urb)
 	}
 }
 
-static int keyspan_write_room (struct usb_serial_port *port)
+static int keyspan_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_port_private	*p_priv;
 	const struct keyspan_device_details	*d_details;
 	int				flip;
@@ -1210,13 +1190,8 @@ static int keyspan_write_room (struct usb_serial_port *port)
 }
 
 
-static int keyspan_chars_in_buffer (struct usb_serial_port *port)
-{
-	return 0;
-}
-
-
-static int keyspan_open (struct usb_serial_port *port, struct file *filp)
+static int keyspan_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct keyspan_port_private 	*p_priv;
 	struct keyspan_serial_private 	*s_priv;
@@ -1225,7 +1200,7 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp)
 	int				i, err;
 	int				baud_rate, device_port;
 	struct urb			*urb;
-	unsigned int			cflag;
+	unsigned int			cflag = 0;
 
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
@@ -1271,19 +1246,19 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp)
 	/* get the terminal config for the setup message now so we don't
 	 * need to send 2 of them */
 
-	cflag = port->tty->termios->c_cflag;
 	device_port = port->number - port->serial->minor;
-
-	/* Baud rate calculation takes baud rate as an integer
-	   so other rates can be generated if desired. */
-	baud_rate = tty_get_baud_rate(port->tty);
-	/* If no match or invalid, leave as default */
-	if (baud_rate >= 0
-	    && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
-				NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
-		p_priv->baud = baud_rate;
+	if (tty) {
+		cflag = tty->termios->c_cflag;
+		/* Baud rate calculation takes baud rate as an integer
+		   so other rates can be generated if desired. */
+		baud_rate = tty_get_baud_rate(tty);
+		/* If no match or invalid, leave as default */
+		if (baud_rate >= 0
+		    && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
+					NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
+			p_priv->baud = baud_rate;
+		}
 	}
-
 	/* set CTS/RTS handshake etc. */
 	p_priv->cflag = cflag;
 	p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
@@ -1301,7 +1276,8 @@ static inline void stop_urb(struct urb *urb)
 		usb_kill_urb(urb);
 }
 
-static void keyspan_close(struct usb_serial_port *port, struct file *filp)
+static void keyspan_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int			i;
 	struct usb_serial	*serial = port->serial;
@@ -1338,7 +1314,7 @@ static void keyspan_close(struct usb_serial_port *port, struct file *filp)
 			stop_urb(p_priv->out_urbs[i]);
 		}
 	}
-	port->tty = NULL;
+	port->port.tty = NULL;
 }
 
 	/* download the firmware to a pre-renumeration device */
@@ -2427,7 +2403,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 	}
 	/* Sending intermediate configs */
 	else {
-		if (port->open_count)
+		if (port->port.count)
 			msg.portEnabled = 1;
 		msg.txBreak = (p_priv->break_on);
 	}
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 8bf72639b14..38b4582e073 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -35,17 +35,18 @@
 
 
 /* Function prototypes for Keyspan serial converter */
-static int  keyspan_open		(struct usb_serial_port *port,
+static int  keyspan_open		(struct tty_struct *tty,
+					 struct usb_serial_port *port,
 					 struct file *filp);
-static void keyspan_close		(struct usb_serial_port *port,
+static void keyspan_close		(struct tty_struct *tty,
+					 struct usb_serial_port *port,
 					 struct file *filp);
 static int  keyspan_startup		(struct usb_serial *serial);
 static void keyspan_shutdown		(struct usb_serial *serial);
-static void keyspan_rx_throttle		(struct usb_serial_port *port);
-static void keyspan_rx_unthrottle	(struct usb_serial_port *port);
-static int  keyspan_write_room		(struct usb_serial_port *port);
+static int  keyspan_write_room		(struct tty_struct *tty);
 
-static int  keyspan_write		(struct usb_serial_port *port,
+static int  keyspan_write		(struct tty_struct *tty,
+					 struct usb_serial_port *port,
 					 const unsigned char *buf,
 					 int count);
 
@@ -53,18 +54,14 @@ static void keyspan_send_setup		(struct usb_serial_port *port,
 					 int reset_port);
 
 
-static int  keyspan_chars_in_buffer 	(struct usb_serial_port *port);
-static int  keyspan_ioctl		(struct usb_serial_port *port,
-					 struct file *file,
-					 unsigned int cmd,
-					 unsigned long arg);
-static void keyspan_set_termios		(struct usb_serial_port *port,
+static void keyspan_set_termios		(struct tty_struct *tty,
+					 struct usb_serial_port *port,
 					 struct ktermios *old);
-static void keyspan_break_ctl		(struct usb_serial_port *port,
+static void keyspan_break_ctl		(struct tty_struct *tty,
 					 int break_state);
-static int  keyspan_tiocmget		(struct usb_serial_port *port,
+static int  keyspan_tiocmget		(struct tty_struct *tty,
 					 struct file *file);
-static int  keyspan_tiocmset		(struct usb_serial_port *port,
+static int  keyspan_tiocmset		(struct tty_struct *tty,
 					 struct file *file, unsigned int set,
 					 unsigned int clear);
 static int  keyspan_fake_startup	(struct usb_serial *serial);
@@ -567,10 +564,6 @@ static struct usb_serial_driver keyspan_1port_device = {
 	.close			= keyspan_close,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
-	.chars_in_buffer	= keyspan_chars_in_buffer,
-	.throttle		= keyspan_rx_throttle,
-	.unthrottle		= keyspan_rx_unthrottle,
-	.ioctl			= keyspan_ioctl,
 	.set_termios		= keyspan_set_termios,
 	.break_ctl		= keyspan_break_ctl,
 	.tiocmget		= keyspan_tiocmget,
@@ -591,10 +584,6 @@ static struct usb_serial_driver keyspan_2port_device = {
 	.close			= keyspan_close,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
-	.chars_in_buffer	= keyspan_chars_in_buffer,
-	.throttle		= keyspan_rx_throttle,
-	.unthrottle		= keyspan_rx_unthrottle,
-	.ioctl			= keyspan_ioctl,
 	.set_termios		= keyspan_set_termios,
 	.break_ctl		= keyspan_break_ctl,
 	.tiocmget		= keyspan_tiocmget,
@@ -615,10 +604,6 @@ static struct usb_serial_driver keyspan_4port_device = {
 	.close			= keyspan_close,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
-	.chars_in_buffer	= keyspan_chars_in_buffer,
-	.throttle		= keyspan_rx_throttle,
-	.unthrottle		= keyspan_rx_unthrottle,
-	.ioctl			= keyspan_ioctl,
 	.set_termios		= keyspan_set_termios,
 	.break_ctl		= keyspan_break_ctl,
 	.tiocmget		= keyspan_tiocmget,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 60b3e22bd63..24a08ac2e4e 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -171,7 +171,7 @@ static void keyspan_pda_wakeup_write(struct work_struct *work)
 		container_of(work, struct keyspan_pda_private, wakeup_work);
 	struct usb_serial_port *port = priv->port;
 
-	tty_wakeup(port->tty);
+	tty_wakeup(port->port.tty);
 }
 
 static void keyspan_pda_request_unthrottle(struct work_struct *work)
@@ -203,7 +203,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
 static void keyspan_pda_rx_interrupt (struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-       	struct tty_struct *tty = port->tty;
+       	struct tty_struct *tty = port->port.tty;
 	unsigned char *data = urb->transfer_buffer;
 	int i;
 	int retval;
@@ -266,7 +266,7 @@ exit:
 }
 
 
-static void keyspan_pda_rx_throttle (struct usb_serial_port *port)
+static void keyspan_pda_rx_throttle(struct tty_struct *tty)
 {
 	/* stop receiving characters. We just turn off the URB request, and
 	   let chars pile up in the device. If we're doing hardware
@@ -274,14 +274,15 @@ static void keyspan_pda_rx_throttle (struct usb_serial_port *port)
 	   fills up. If we're doing XON/XOFF, this would be a good time to
 	   send an XOFF, although it might make sense to foist that off
 	   upon the device too. */
-
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("keyspan_pda_rx_throttle port %d", port->number);
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
 
-static void keyspan_pda_rx_unthrottle (struct usb_serial_port *port)
+static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	/* just restart the receive interrupt URB */
 	dbg("keyspan_pda_rx_unthrottle port %d", port->number);
 	port->interrupt_in_urb->dev = port->serial->dev;
@@ -330,8 +331,9 @@ static speed_t keyspan_pda_setbaud (struct usb_serial *serial, speed_t baud)
 }
 
 
-static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state)
+static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int value;
 	int result;
@@ -354,8 +356,8 @@ static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state
 }
 
 
-static void keyspan_pda_set_termios (struct usb_serial_port *port, 
-				     struct ktermios *old_termios)
+static void keyspan_pda_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	speed_t speed;
@@ -380,7 +382,7 @@ static void keyspan_pda_set_termios (struct usb_serial_port *port,
 
 	   For now, just do baud. */
 
-	speed = tty_get_baud_rate(port->tty);
+	speed = tty_get_baud_rate(tty);
 	speed = keyspan_pda_setbaud(serial, speed);
 
 	if (speed == 0) {
@@ -390,8 +392,8 @@ static void keyspan_pda_set_termios (struct usb_serial_port *port,
 	}
 	/* Only speed can change so copy the old h/w parameters
 	   then encode the new speed */
-	tty_termios_copy_hw(port->tty->termios, old_termios);
-	tty_encode_baud_rate(port->tty, speed, speed);
+	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_encode_baud_rate(tty, speed, speed);
 }
 
 
@@ -425,8 +427,9 @@ static int keyspan_pda_set_modem_info(struct usb_serial *serial,
 	return rc;
 }
 
-static int keyspan_pda_tiocmget(struct usb_serial_port *port, struct file *file)
+static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int rc;
 	unsigned char status;
@@ -445,9 +448,10 @@ static int keyspan_pda_tiocmget(struct usb_serial_port *port, struct file *file)
 	return value;
 }
 
-static int keyspan_pda_tiocmset(struct usb_serial_port *port, struct file *file,
+static int keyspan_pda_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int rc;
 	unsigned char status;
@@ -469,23 +473,8 @@ static int keyspan_pda_tiocmset(struct usb_serial_port *port, struct file *file,
 	return rc;
 }
 
-static int keyspan_pda_ioctl(struct usb_serial_port *port, struct file *file,
-			     unsigned int cmd, unsigned long arg)
-{
-	switch (cmd) {
-	case TIOCMIWAIT:
-		/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
-		/* TODO */
-	case TIOCGICOUNT:
-		/* return count of modemline transitions */
-		return 0; /* TODO */
-	}
-	
-	return -ENOIOCTLCMD;
-}
-
-static int keyspan_pda_write(struct usb_serial_port *port, 
-			     const unsigned char *buf, int count)
+static int keyspan_pda_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	int request_unthrottle = 0;
@@ -607,22 +596,21 @@ static void keyspan_pda_write_bulk_callback (struct urb *urb)
 }
 
 
-static int keyspan_pda_write_room (struct usb_serial_port *port)
+static int keyspan_pda_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_pda_private *priv;
-
 	priv = usb_get_serial_port_data(port);
-
 	/* used by n_tty.c for processing of tabs and such. Giving it our
 	   conservative guess is probably good enough, but needs testing by
 	   running a console through the device. */
-
 	return (priv->tx_room);
 }
 
 
-static int keyspan_pda_chars_in_buffer (struct usb_serial_port *port)
+static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_pda_private *priv;
 	unsigned long flags;
 	int ret = 0;
@@ -640,7 +628,8 @@ static int keyspan_pda_chars_in_buffer (struct usb_serial_port *port)
 }
 
 
-static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp)
+static int keyspan_pda_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	unsigned char room;
@@ -672,7 +661,7 @@ static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp)
 
 	/* the normal serial device seems to always turn on DTR and RTS here,
 	   so do the same */
-	if (port->tty->termios->c_cflag & CBAUD)
+	if (tty && (tty->termios->c_cflag & CBAUD))
 		keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2) );
 	else
 		keyspan_pda_set_modem_info(serial, 0);
@@ -690,13 +679,14 @@ error:
 }
 
 
-static void keyspan_pda_close(struct usb_serial_port *port, struct file *filp)
+static void keyspan_pda_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 
 	if (serial->dev) {
 		/* the normal serial device seems to always shut off DTR and RTS now */
-		if (port->tty->termios->c_cflag & HUPCL)
+		if (tty->termios->c_cflag & HUPCL)
 			keyspan_pda_set_modem_info(serial, 0);
 
 		/* shutdown our bulk reads and writes */
@@ -832,7 +822,6 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.chars_in_buffer =	keyspan_pda_chars_in_buffer,
 	.throttle =		keyspan_pda_rx_throttle,
 	.unthrottle =		keyspan_pda_rx_unthrottle,
-	.ioctl =		keyspan_pda_ioctl,
 	.set_termios =		keyspan_pda_set_termios,
 	.break_ctl =		keyspan_pda_break_ctl,
 	.tiocmget =		keyspan_pda_tiocmget,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 79787eda952..4a38ec8f5fe 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -74,29 +74,33 @@ static int debug;
  */
 static int  klsi_105_startup	         (struct usb_serial *serial);
 static void klsi_105_shutdown	         (struct usb_serial *serial);
-static int  klsi_105_open	         (struct usb_serial_port *port,
+static int  klsi_105_open	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct file *filp);
-static void klsi_105_close	         (struct usb_serial_port *port,
+static void klsi_105_close	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct file *filp);
-static int  klsi_105_write	         (struct usb_serial_port *port,
+static int  klsi_105_write	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  const unsigned char *buf,
 					  int count);
 static void klsi_105_write_bulk_callback (struct urb *urb);
-static int  klsi_105_chars_in_buffer     (struct usb_serial_port *port);
-static int  klsi_105_write_room          (struct usb_serial_port *port);
+static int  klsi_105_chars_in_buffer     (struct tty_struct *tty);
+static int  klsi_105_write_room          (struct tty_struct *tty);
 
 static void klsi_105_read_bulk_callback  (struct urb *urb);
-static void klsi_105_set_termios         (struct usb_serial_port *port,
+static void klsi_105_set_termios         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct ktermios *old);
-static void klsi_105_throttle		 (struct usb_serial_port *port);
-static void klsi_105_unthrottle		 (struct usb_serial_port *port);
+static void klsi_105_throttle		 (struct tty_struct *tty);
+static void klsi_105_unthrottle		 (struct tty_struct *tty);
 /*
-static void klsi_105_break_ctl	         (struct usb_serial_port *port,
+static void klsi_105_break_ctl	         (struct tty_struct *tty,
 					  int break_state );
  */
-static int  klsi_105_tiocmget	         (struct usb_serial_port *port,
+static int  klsi_105_tiocmget	         (struct tty_struct *tty,
 					  struct file *file);
-static int  klsi_105_tiocmset	         (struct usb_serial_port *port,
+static int  klsi_105_tiocmset	         (struct tty_struct *tty,
 					  struct file *file, unsigned int set,
 					  unsigned int clear);
 
@@ -361,7 +365,8 @@ static void klsi_105_shutdown (struct usb_serial *serial)
 	}
 } /* klsi_105_shutdown */
 
-static int  klsi_105_open (struct usb_serial_port *port, struct file *filp)
+static int  klsi_105_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
@@ -375,7 +380,7 @@ static int  klsi_105_open (struct usb_serial_port *port, struct file *filp)
 
 	/* force low_latency on so that our tty_push actually forces
 	 * the data through
-	 * port->tty->low_latency = 1; */
+	 * tty->low_latency = 1; */
 
 	/* Do a defined restart:
 	 * Set up sane default baud rate and send the 'READ_ON'
@@ -393,12 +398,12 @@ static int  klsi_105_open (struct usb_serial_port *port, struct file *filp)
 	
 	/* set up termios structure */
 	spin_lock_irqsave (&priv->lock, flags);
-	priv->termios.c_iflag = port->tty->termios->c_iflag;
-	priv->termios.c_oflag = port->tty->termios->c_oflag;
-	priv->termios.c_cflag = port->tty->termios->c_cflag;
-	priv->termios.c_lflag = port->tty->termios->c_lflag;
+	priv->termios.c_iflag = tty->termios->c_iflag;
+	priv->termios.c_oflag = tty->termios->c_oflag;
+	priv->termios.c_cflag = tty->termios->c_cflag;
+	priv->termios.c_lflag = tty->termios->c_lflag;
 	for (i=0; i<NCCS; i++)
-		priv->termios.c_cc[i] = port->tty->termios->c_cc[i];
+		priv->termios.c_cc[i] = tty->termios->c_cc[i];
 	priv->cfg.pktlen   = cfg.pktlen;
 	priv->cfg.baudrate = cfg.baudrate;
 	priv->cfg.databits = cfg.databits;
@@ -452,7 +457,8 @@ exit:
 } /* klsi_105_open */
 
 
-static void klsi_105_close (struct usb_serial_port *port, struct file *filp)
+static void klsi_105_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int rc;
@@ -493,8 +499,8 @@ static void klsi_105_close (struct usb_serial_port *port, struct file *filp)
 #define KLSI_105_DATA_OFFSET	2   /* in the bulk urb data block */
 
 
-static int klsi_105_write (struct usb_serial_port *port,
-			   const unsigned char *buf, int count)
+static int klsi_105_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int result, size;
@@ -584,8 +590,9 @@ static void klsi_105_write_bulk_callback ( struct urb *urb)
 
 
 /* return number of characters currently in the writing process */
-static int klsi_105_chars_in_buffer (struct usb_serial_port *port)
+static int klsi_105_chars_in_buffer (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int chars = 0;
 	int i;
 	unsigned long flags;
@@ -605,8 +612,9 @@ static int klsi_105_chars_in_buffer (struct usb_serial_port *port)
 	return (chars);
 }
 
-static int klsi_105_write_room (struct usb_serial_port *port)
+static int klsi_105_write_room (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 	int i;
 	int room = 0;
@@ -660,7 +668,7 @@ static void klsi_105_read_bulk_callback (struct urb *urb)
 	} else {
 		int bytes_sent = ((__u8 *) data)[0] +
 				 ((unsigned int) ((__u8 *) data)[1] << 8);
-		tty = port->tty;
+		tty = port->port.tty;
 		/* we should immediately resubmit the URB, before attempting
 		 * to pass the data on to the tty layer. But that needs locking
 		 * against re-entry an then mixed-up data because of
@@ -699,11 +707,11 @@ static void klsi_105_read_bulk_callback (struct urb *urb)
 } /* klsi_105_read_bulk_callback */
 
 
-static void klsi_105_set_termios (struct usb_serial_port *port,
+static void klsi_105_set_termios (struct tty_struct *tty,
+				  struct usb_serial_port *port,
 				  struct ktermios *old_termios)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned int iflag = tty->termios->c_iflag;
 	unsigned int old_iflag = old_termios->c_iflag;
 	unsigned int cflag = tty->termios->c_cflag;
@@ -863,8 +871,9 @@ static void klsi_105_set_termios (struct usb_serial_port *port,
 
 
 #if 0
-static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
+static void mct_u232_break_ctl( struct tty_struct *tty, int break_state )
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
 	unsigned char lcr = priv->last_lcr;
@@ -878,8 +887,9 @@ static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
 } /* mct_u232_break_ctl */
 #endif
 
-static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file)
+static int klsi_105_tiocmget (struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	int rc;
@@ -900,7 +910,7 @@ static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file)
 	return (int)line_state;
 }
 
-static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file,
+static int klsi_105_tiocmset (struct tty_struct *tty, struct file *file,
 			      unsigned int set, unsigned int clear)
 {
 	int retval = -EINVAL;
@@ -929,14 +939,16 @@ static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file,
 	return retval;
 }
 
-static void klsi_105_throttle (struct usb_serial_port *port)
+static void klsi_105_throttle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
 }
 
-static void klsi_105_unthrottle (struct usb_serial_port *port)
+static void klsi_105_unthrottle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int result;
 
 	dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 693f00da7c0..40c67f0096b 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -70,19 +70,22 @@ static int debug;
 /* Function prototypes */
 static int  kobil_startup (struct usb_serial *serial);
 static void kobil_shutdown (struct usb_serial *serial);
-static int  kobil_open (struct usb_serial_port *port, struct file *filp);
-static void kobil_close (struct usb_serial_port *port, struct file *filp);
-static int  kobil_write (struct usb_serial_port *port, 
+static int  kobil_open (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void kobil_close (struct tty_struct *tty, struct usb_serial_port *port,
+			struct file *filp);
+static int  kobil_write (struct tty_struct *tty, struct usb_serial_port *port, 
 			 const unsigned char *buf, int count);
-static int  kobil_write_room(struct usb_serial_port *port);
-static int  kobil_ioctl(struct usb_serial_port *port, struct file *file,
+static int  kobil_write_room(struct tty_struct *tty);
+static int  kobil_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
-static int  kobil_tiocmget(struct usb_serial_port *port, struct file *file);
-static int  kobil_tiocmset(struct usb_serial_port *port, struct file *file,
+static int  kobil_tiocmget(struct tty_struct *tty, struct file *file);
+static int  kobil_tiocmset(struct tty_struct *tty, struct file *file,
 			   unsigned int set, unsigned int clear);
 static void kobil_read_int_callback( struct urb *urb );
 static void kobil_write_callback( struct urb *purb );
-static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old);
+static void kobil_set_termios(struct tty_struct *tty, 
+			struct usb_serial_port *port, struct ktermios *old);
 
 
 static struct usb_device_id id_table [] = {
@@ -201,8 +204,8 @@ static void kobil_shutdown (struct usb_serial *serial)
 	dbg("%s - port %d", __func__, serial->port[0]->number);
 
 	for (i=0; i < serial->num_ports; ++i) {
-		while (serial->port[i]->open_count > 0) {
-			kobil_close (serial->port[i], NULL);
+		while (serial->port[i]->port.count > 0) {
+			kobil_close (NULL, serial->port[i], NULL);
 		}
 		kfree(usb_get_serial_port_data(serial->port[i]));
 		usb_set_serial_port_data(serial->port[i], NULL);
@@ -210,7 +213,8 @@ static void kobil_shutdown (struct usb_serial *serial)
 }
 
 
-static int kobil_open (struct usb_serial_port *port, struct file *filp)
+static int kobil_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int result = 0;
 	struct kobil_private *priv;
@@ -229,14 +233,15 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp)
 	 * the data through, otherwise it is scheduled, and with high
 	 * data rates (like with OHCI) data can get lost.
 	 */
-	port->tty->low_latency = 1;
-
-	// without this, every push_tty_char is echoed :-(  
-	port->tty->termios->c_lflag = 0;
-	port->tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
-	port->tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
-	port->tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
-	
+	if (tty) {
+		tty->low_latency = 1;
+
+		/* Default to echo off and other sane device settings */
+		tty->termios->c_lflag = 0;
+		tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+		tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+		tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
+	}	
 	// allocate memory for transfer buffer
 	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
 	if (! transfer_buffer) {
@@ -330,7 +335,8 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp)
 }
 
 
-static void kobil_close (struct usb_serial_port *port, struct file *filp)
+static void kobil_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -360,7 +366,7 @@ static void kobil_read_int_callback(struct urb *urb)
 		return;
 	}
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (urb->actual_length) {
 
 		// BEGIN DEBUG
@@ -395,7 +401,7 @@ static void kobil_write_callback( struct urb *purb )
 }
 
 
-static int kobil_write (struct usb_serial_port *port, 
+static int kobil_write (struct tty_struct *tty, struct usb_serial_port *port, 
 			const unsigned char *buf, int count)
 {
 	int length = 0;
@@ -417,12 +423,9 @@ static int kobil_write (struct usb_serial_port *port,
 
 	// Copy data to buffer
 	memcpy (priv->buf + priv->filled, buf, count);
-
 	usb_serial_debug_data(debug, &port->dev, __func__, count, priv->buf + priv->filled);
-
 	priv->filled = priv->filled + count;
 
-
 	// only send complete block. TWIN, KAAN SIM and adapter K use the same protocol.
 	if ( ((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) || 
 	     ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4))) ) {
@@ -478,15 +481,17 @@ static int kobil_write (struct usb_serial_port *port,
 }
 
 
-static int kobil_write_room (struct usb_serial_port *port)
+static int kobil_write_room (struct tty_struct *tty)
 {
 	//dbg("%s - port %d", __func__, port->number);
+	/* FIXME */
 	return 8;
 }
 
 
-static int kobil_tiocmget(struct usb_serial_port *port, struct file *file)
+static int kobil_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct kobil_private * priv;
 	int result;
 	unsigned char *transfer_buffer;
@@ -524,9 +529,10 @@ static int kobil_tiocmget(struct usb_serial_port *port, struct file *file)
 	return result;
 }
 
-static int  kobil_tiocmset(struct usb_serial_port *port, struct file *file,
+static int kobil_tiocmset(struct tty_struct *tty, struct file *file,
 			   unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct kobil_private * priv;
 	int result;
 	int dtr = 0;
@@ -590,12 +596,13 @@ static int  kobil_tiocmset(struct usb_serial_port *port, struct file *file,
 	return (result < 0) ? result : 0;
 }
 
-static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old)
+static void kobil_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old)
 {
 	struct kobil_private * priv;
 	int result;
 	unsigned short urb_val = 0;
-	int c_cflag = port->tty->termios->c_cflag;
+	int c_cflag = tty->termios->c_cflag;
 	speed_t speed;
 	void * settings;
 
@@ -604,7 +611,7 @@ static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old
 		// This device doesn't support ioctl calls
 		return;
 
-	switch (speed = tty_get_baud_rate(port->tty)) {
+	switch (speed = tty_get_baud_rate(tty)) {
 		case 1200:
 			urb_val = SUSBCR_SBR_1200;
 			break;
@@ -634,8 +641,8 @@ static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old
 		urb_val |= SUSBCR_SPASB_NoParity;
 		strcat(settings, "No Parity");
 	}
-	port->tty->termios->c_cflag &= ~CMSPAR;
-	tty_encode_baud_rate(port->tty, speed, speed);
+	tty->termios->c_cflag &= ~CMSPAR;
+	tty_encode_baud_rate(tty, speed, speed);
 
 	result = usb_control_msg( port->serial->dev,
 				  usb_rcvctrlpipe(port->serial->dev, 0 ),
@@ -650,8 +657,9 @@ static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old
 	kfree(settings);
 }
 
-static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+static int kobil_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct kobil_private * priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
 	int transfer_buffer_length = 8;
@@ -662,7 +670,7 @@ static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigne
 		return 0;
 
 	switch (cmd) {
-	case TCFLSH:   // 0x540B
+	case TCFLSH:
 		transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
 		if (! transfer_buffer)
 		 	return -ENOBUFS;
@@ -680,7 +688,7 @@ static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigne
 		
 		dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __func__, port->number, result);
 		kfree(transfer_buffer);
-		return (result < 0) ? -EFAULT : 0;
+		return (result < 0) ? -EIO: 0;
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 5fc2cef30e3..7bce4302a5f 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -92,26 +92,25 @@ static int debug;
  */
 static int  mct_u232_startup	         (struct usb_serial *serial);
 static void mct_u232_shutdown	         (struct usb_serial *serial);
-static int  mct_u232_open	         (struct usb_serial_port *port,
+static int  mct_u232_open	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct file *filp);
-static void mct_u232_close	         (struct usb_serial_port *port,
+static void mct_u232_close	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct file *filp);
 static void mct_u232_read_int_callback   (struct urb *urb);
-static void mct_u232_set_termios         (struct usb_serial_port *port,
+static void mct_u232_set_termios         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct ktermios * old);
-static int  mct_u232_ioctl	         (struct usb_serial_port *port,
-					  struct file * file,
-					  unsigned int cmd,
-					  unsigned long arg);
-static void mct_u232_break_ctl	         (struct usb_serial_port *port,
+static void mct_u232_break_ctl	         (struct tty_struct *tty,
 					  int break_state );
-static int  mct_u232_tiocmget		 (struct usb_serial_port *port,
+static int  mct_u232_tiocmget		 (struct tty_struct *tty,
 					  struct file *file);
-static int  mct_u232_tiocmset		 (struct usb_serial_port *port,
+static int  mct_u232_tiocmset		 (struct tty_struct *tty,
 					  struct file *file, unsigned int set,
 					  unsigned int clear);
-static void mct_u232_throttle		 (struct usb_serial_port *port);
-static void mct_u232_unthrottle		 (struct usb_serial_port *port);
+static void mct_u232_throttle		 (struct tty_struct *tty);
+static void mct_u232_unthrottle		 (struct tty_struct *tty);
 
 
 /*
@@ -149,7 +148,6 @@ static struct usb_serial_driver mct_u232_device = {
 	.throttle =	     mct_u232_throttle,
 	.unthrottle =	     mct_u232_unthrottle,
 	.read_int_callback = mct_u232_read_int_callback,
-	.ioctl =	     mct_u232_ioctl,
 	.set_termios =	     mct_u232_set_termios,
 	.break_ctl =	     mct_u232_break_ctl,
 	.tiocmget =	     mct_u232_tiocmget,
@@ -224,8 +222,8 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
 	}
 }
 
-static int mct_u232_set_baud_rate(struct usb_serial *serial, struct usb_serial_port *port,
-				  speed_t value)
+static int mct_u232_set_baud_rate(struct tty_struct *tty,
+	struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
 {
 	__le32 divisor;
         int rc;
@@ -243,7 +241,7 @@ static int mct_u232_set_baud_rate(struct usb_serial *serial, struct usb_serial_p
 	if (rc < 0)	/*FIXME: What value speed results */
 		err("Set BAUD RATE %d failed (error = %d)", value, rc);
 	else
-		tty_encode_baud_rate(port->tty, speed, speed);
+		tty_encode_baud_rate(tty, speed, speed);
 	dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
 
 	/* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
@@ -272,7 +270,7 @@ static int mct_u232_set_baud_rate(struct usb_serial *serial, struct usb_serial_p
 		err("Sending USB device request code %d failed (error = %d)", 
 		    MCT_U232_SET_UNKNOWN1_REQUEST, rc);
 
-	if (port && C_CRTSCTS(port->tty)) {
+	if (port && C_CRTSCTS(tty)) {
 	   cts_enable_byte = 1;
 	}
 
@@ -411,7 +409,8 @@ static void mct_u232_shutdown (struct usb_serial *serial)
 	}
 } /* mct_u232_shutdown */
 
-static int  mct_u232_open (struct usb_serial_port *port, struct file *filp)
+static int  mct_u232_open (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
@@ -437,7 +436,7 @@ static int  mct_u232_open (struct usb_serial_port *port, struct file *filp)
 	 * either.
 	 */
 	spin_lock_irqsave(&priv->lock, flags);
-	if (port->tty->termios->c_cflag & CBAUD)
+	if (tty && (tty->termios->c_cflag & CBAUD))
 		priv->control_state = TIOCM_DTR | TIOCM_RTS;
 	else
 		priv->control_state = 0;
@@ -481,15 +480,16 @@ error:
 } /* mct_u232_open */
 
 
-static void mct_u232_close (struct usb_serial_port *port, struct file *filp)
+static void mct_u232_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	unsigned int c_cflag;
 	unsigned int control_state;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	dbg("%s port %d", __func__, port->number);
 
-   	if (port->tty) {
-		c_cflag = port->tty->termios->c_cflag;
+   	if (tty) {
+		c_cflag = tty->termios->c_cflag;
 		mutex_lock(&port->serial->disc_mutex);
 		if (c_cflag & HUPCL && !port->serial->disconnected) {
 			/* drop DTR and RTS */
@@ -553,7 +553,7 @@ static void mct_u232_read_int_callback (struct urb *urb)
 	 */
 	if (urb->transfer_buffer_length > 2) {
 		int i;
-		tty = port->tty;
+		tty = port->port.tty;
 		if (urb->actual_length) {
 			for (i = 0; i < urb->actual_length ; ++i) {
 				tty_insert_flip_char(tty, data[i], 0);
@@ -583,7 +583,7 @@ static void mct_u232_read_int_callback (struct urb *urb)
 	 * to look in to this before committing any code.
 	 */
 	if (priv->last_lsr & MCT_U232_LSR_ERR) {
-		tty = port->tty;
+		tty = port->port.tty;
 		/* Overrun Error */
 		if (priv->last_lsr & MCT_U232_LSR_OE) {
 		}
@@ -606,12 +606,13 @@ exit:
 		     __func__, retval);
 } /* mct_u232_read_int_callback */
 
-static void mct_u232_set_termios (struct usb_serial_port *port,
+static void mct_u232_set_termios (struct tty_struct *tty,
+				  struct usb_serial_port *port,
 				  struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned long flags;
@@ -638,7 +639,7 @@ static void mct_u232_set_termios (struct usb_serial_port *port,
 		mct_u232_set_modem_ctrl(serial, control_state);
 	}
 
-	mct_u232_set_baud_rate(serial, port, tty_get_baud_rate(port->tty));
+	mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty));
 
 	if ((cflag & CBAUD) == B0 ) {
 		dbg("%s: baud is B0", __func__);
@@ -689,8 +690,9 @@ static void mct_u232_set_termios (struct usb_serial_port *port,
 	spin_unlock_irqrestore(&priv->lock, flags);
 } /* mct_u232_set_termios */
 
-static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
+static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned char lcr;
@@ -709,8 +711,9 @@ static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
 } /* mct_u232_break_ctl */
 
 
-static int mct_u232_tiocmget (struct usb_serial_port *port, struct file *file)
+static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned int control_state;
 	unsigned long flags;
@@ -724,9 +727,10 @@ static int mct_u232_tiocmget (struct usb_serial_port *port, struct file *file)
 	return control_state;
 }
 
-static int mct_u232_tiocmset (struct usb_serial_port *port, struct file *file,
+static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
 			      unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned int control_state;
@@ -751,73 +755,46 @@ static int mct_u232_tiocmset (struct usb_serial_port *port, struct file *file,
 	return mct_u232_set_modem_ctrl(serial, control_state);
 }
 
-static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file,
-			   unsigned int cmd, unsigned long arg)
-{
-	dbg("%scmd=0x%x", __func__, cmd);
-
-	/* Based on code from acm.c and others */
-	switch (cmd) {
-	case TIOCMIWAIT:
-		/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
-		/* TODO */
-		return( 0 );
-
-	case TIOCGICOUNT:
-		/* return count of modemline transitions */
-		/* TODO */
-		return 0;
-
-	default:
-		dbg("%s: arg not supported - 0x%04x", __func__,cmd);
-		return(-ENOIOCTLCMD);
-		break;
-	}
-	return 0;
-} /* mct_u232_ioctl */
-
-static void mct_u232_throttle (struct usb_serial_port *port)
+static void mct_u232_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int control_state;
-	struct tty_struct *tty;
 
-	tty = port->tty;
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->rx_flags |= THROTTLED;
 	if (C_CRTSCTS(tty)) {
-	  priv->control_state &= ~TIOCM_RTS;
-	  control_state = priv->control_state;
-	  spin_unlock_irqrestore(&priv->lock, flags);
-	  (void) mct_u232_set_modem_ctrl(port->serial, control_state);
+		priv->control_state &= ~TIOCM_RTS;
+		control_state = priv->control_state;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		(void) mct_u232_set_modem_ctrl(port->serial, control_state);
 	} else {
-	  spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 }
 
 
-static void mct_u232_unthrottle (struct usb_serial_port *port)
+static void mct_u232_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int control_state;
-	struct tty_struct *tty;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	tty = port->tty;
 	spin_lock_irqsave(&priv->lock, flags);
 	if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
-	  priv->rx_flags &= ~THROTTLED;
-	  priv->control_state |= TIOCM_RTS;
-	  control_state = priv->control_state;
-	  spin_unlock_irqrestore(&priv->lock, flags);
-	  (void) mct_u232_set_modem_ctrl(port->serial, control_state);
+		priv->rx_flags &= ~THROTTLED;
+		priv->control_state |= TIOCM_RTS;
+		control_state = priv->control_state;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		(void) mct_u232_set_modem_ctrl(port->serial, control_state);
 	} else {
-	  spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 }
 
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 50f1fe26333..d47f0814ce2 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -218,7 +218,7 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 
 	data = urb->transfer_buffer;
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
@@ -264,7 +264,7 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 
 	dbg("Entering .........");
 
-	tty = mos7720_port->port->tty;
+	tty = mos7720_port->port->port.tty;
 
 	if (tty && mos7720_port->open)
 		tty_wakeup(tty);
@@ -320,7 +320,8 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
 	return status;
 }
 
-static int mos7720_open(struct usb_serial_port *port, struct file * filp)
+static int mos7720_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct usb_serial *serial;
 	struct usb_serial_port *port0;
@@ -443,14 +444,12 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp)
 	data = 0x0c;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
 
-//Matrix
-
 	/* force low_latency on so that our tty_push actually forces *
 	 * the data through,otherwise it is scheduled, and with      *
 	 * high data rates (like with OHCI) data can get lost.       */
 
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* see if we've set up our endpoint info yet   *
 	 * (can't set it up in mos7720_startup as the  *
@@ -515,8 +514,9 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp)
  *	system,
  *	Otherwise we return a negative error number.
  */
-static int mos7720_chars_in_buffer(struct usb_serial_port *port)
+static int mos7720_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int i;
 	int chars = 0;
 	struct moschip_port *mos7720_port;
@@ -537,7 +537,8 @@ static int mos7720_chars_in_buffer(struct usb_serial_port *port)
 	return chars;
 }
 
-static void mos7720_close(struct usb_serial_port *port, struct file *filp)
+static void mos7720_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
@@ -588,8 +589,9 @@ static void mos7720_close(struct usb_serial_port *port, struct file *filp)
 	dbg("Leaving %s", __func__);
 }
 
-static void mos7720_break(struct usb_serial_port *port, int break_state)
+static void mos7720_break(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
         unsigned char data;
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
@@ -621,8 +623,9 @@ static void mos7720_break(struct usb_serial_port *port, int break_state)
  *	If successful, we return the amount of room that we have for this port
  *	Otherwise we return a negative error number.
  */
-static int mos7720_write_room(struct usb_serial_port *port)
+static int mos7720_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port;
 	int room = 0;
 	int i;
@@ -645,8 +648,8 @@ static int mos7720_write_room(struct usb_serial_port *port)
 	return room;
 }
 
-static int mos7720_write(struct usb_serial_port *port,
-			 const unsigned char *data, int count)
+static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
+				 const unsigned char *data, int count)
 {
 	int status;
 	int i;
@@ -719,10 +722,10 @@ exit:
 	return bytes_sent;
 }
 
-static void mos7720_throttle(struct usb_serial_port *port)
+static void mos7720_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port;
-	struct tty_struct *tty;
 	int status;
 
 	dbg("%s- port %d\n", __func__, port->number);
@@ -739,16 +742,10 @@ static void mos7720_throttle(struct usb_serial_port *port)
 
 	dbg("%s: Entering ..........", __func__);
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
-		status = mos7720_write(port, &stop_char, 1);
+		status = mos7720_write(tty, port, &stop_char, 1);
 		if (status <= 0)
 			return;
 	}
@@ -764,11 +761,11 @@ static void mos7720_throttle(struct usb_serial_port *port)
 	}
 }
 
-static void mos7720_unthrottle(struct usb_serial_port *port)
+static void mos7720_unthrottle(struct tty_struct *tty)
 {
-	struct tty_struct *tty;
-	int status;
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	int status;
 
 	if (mos7720_port == NULL)
 		return;
@@ -780,16 +777,10 @@ static void mos7720_unthrottle(struct usb_serial_port *port)
 
 	dbg("%s: Entering ..........", __func__);
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
 		unsigned char start_char = START_CHAR(tty);
-		status = mos7720_write(port, &start_char, 1);
+		status = mos7720_write(tty, port, &start_char, 1);
 		if (status <= 0)
 			return;
 	}
@@ -1011,12 +1002,12 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
  *	This routine is called to set the UART on the device to match
  *      the specified new settings.
  */
-static void change_port_settings(struct moschip_port *mos7720_port,
+static void change_port_settings(struct tty_struct *tty,
+				 struct moschip_port *mos7720_port,
 				 struct ktermios *old_termios)
 {
 	struct usb_serial_port *port;
 	struct usb_serial *serial;
-	struct tty_struct *tty;
 	int baud;
 	unsigned cflag;
 	unsigned iflag;
@@ -1042,8 +1033,6 @@ static void change_port_settings(struct moschip_port *mos7720_port,
 		return;
 	}
 
-	tty = mos7720_port->port->tty;
-
 	dbg("%s: Entering ..........", __func__);
 
 	lData = UART_LCR_WLEN8;
@@ -1198,14 +1187,13 @@ static void change_port_settings(struct moschip_port *mos7720_port,
  *	this function is called by the tty driver when it wants to change the
  *	termios structure.
  */
-static void mos7720_set_termios(struct usb_serial_port *port,
-				struct ktermios *old_termios)
+static void mos7720_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	int status;
 	unsigned int cflag;
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
-	struct tty_struct *tty;
 
 	serial = port->serial;
 
@@ -1214,9 +1202,6 @@ static void mos7720_set_termios(struct usb_serial_port *port,
 	if (mos7720_port == NULL)
 		return;
 
-	tty = port->tty;
-
-
 	if (!mos7720_port->open) {
 		dbg("%s - port not opened", __func__);
 		return;
@@ -1237,7 +1222,7 @@ static void mos7720_set_termios(struct usb_serial_port *port,
 	dbg("%s - port %d", __func__, port->number);
 
 	/* change the port settings to the new ones specified */
-	change_port_settings(mos7720_port, old_termios);
+	change_port_settings(tty, mos7720_port, old_termios);
 
 	if(!port->read_urb) {
 		dbg("%s","URB KILLED !!!!!\n");
@@ -1264,13 +1249,13 @@ static void mos7720_set_termios(struct usb_serial_port *port,
  * 	    transmit holding register is empty.  This functionality
  * 	    allows an RS485 driver to be written in user space.
  */
-static int get_lsr_info(struct moschip_port *mos7720_port,
+static int get_lsr_info(struct tty_struct *tty, struct moschip_port *mos7720_port,
 			unsigned int __user *value)
 {
 	int count;
 	unsigned int result = 0;
 
-	count = mos7720_chars_in_buffer(mos7720_port->port);
+	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
 		dbg("%s -- Empty", __func__);
 		result = TIOCSER_TEMT;
@@ -1290,7 +1275,7 @@ static int get_number_bytes_avail(struct moschip_port *mos7720_port,
 				  unsigned int __user *value)
 {
 	unsigned int result = 0;
-	struct tty_struct *tty = mos7720_port->port->tty;
+	struct tty_struct *tty = mos7720_port->port->port.tty;
 
 	if (!tty)
 		return -ENOIOCTLCMD;
@@ -1407,9 +1392,10 @@ static int get_serial_info(struct moschip_port *mos7720_port,
 	return 0;
 }
 
-static int mos7720_ioctl(struct usb_serial_port *port, struct file *file,
+static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port;
 	struct async_icount cnow;
 	struct async_icount cprev;
@@ -1431,9 +1417,10 @@ static int mos7720_ioctl(struct usb_serial_port *port, struct file *file,
 
 	case TIOCSERGETLSR:
 		dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
-		return get_lsr_info(mos7720_port, (unsigned int __user *)arg);
+		return get_lsr_info(tty, mos7720_port, (unsigned int __user *)arg);
 		return 0;
 
+	/* FIXME: These should be using the mode methods */
 	case TIOCMBIS:
 	case TIOCMBIC:
 	case TIOCMSET:
@@ -1452,10 +1439,6 @@ static int mos7720_ioctl(struct usb_serial_port *port, struct file *file,
 		return get_serial_info(mos7720_port,
 				       (struct serial_struct __user *)arg);
 
-	case TIOCSSERIAL:
-		dbg("%s (%d) TIOCSSERIAL", __func__,  port->number);
-		break;
-
 	case TIOCMIWAIT:
 		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
 		cprev = mos7720_port->icount;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 78f2f6db494..2b1fded6619 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -710,7 +710,7 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 	dbg("%s", "Entering ........... \n");
 
 	if (urb->actual_length) {
-		tty = mos7840_port->port->tty;
+		tty = mos7840_port->port->port.tty;
 		if (tty) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
@@ -774,7 +774,7 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
 
 	dbg("%s \n", "Entering .........");
 
-	tty = mos7840_port->port->tty;
+	tty = mos7840_port->port->port.tty;
 
 	if (tty && mos7840_port->open)
 		tty_wakeup(tty);
@@ -804,7 +804,8 @@ static int mos7840_serial_probe(struct usb_serial *serial,
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_open(struct usb_serial_port *port, struct file *filp)
+static int mos7840_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int response;
 	int j;
@@ -1008,8 +1009,8 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
 	 * the data through,otherwise it is scheduled, and with      *
 	 * high data rates (like with OHCI) data can get lost.       */
 
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 /* Check to see if we've set up our endpoint info yet    *
      * (can't set it up in mos7840_startup as the structures *
      * were not set up at that time.)                        */
@@ -1104,11 +1105,12 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
  *	been written, but hasn't made it out the port yet)
  *	If successful, we return the number of bytes left to be written in the
  *	system,
- *	Otherwise we return a negative error number.
+ *	Otherwise we return zero.
  *****************************************************************************/
 
-static int mos7840_chars_in_buffer(struct usb_serial_port *port)
+static int mos7840_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int i;
 	int chars = 0;
 	unsigned long flags;
@@ -1118,21 +1120,19 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port \n");
-		return -1;
+		return 0;
 	}
 
 	mos7840_port = mos7840_get_port_private(port);
 	if (mos7840_port == NULL) {
 		dbg("%s \n", "mos7840_break:leaving ...........");
-		return -1;
+		return 0;
 	}
 
 	spin_lock_irqsave(&mos7840_port->pool_lock,flags);
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (mos7840_port->busy[i]) {
+	for (i = 0; i < NUM_URBS; ++i)
+		if (mos7840_port->busy[i])
 			chars += URB_TRANSFER_BUFFER_SIZE;
-		}
-	}
 	spin_unlock_irqrestore(&mos7840_port->pool_lock,flags);
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
@@ -1149,7 +1149,8 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
  *		3. A timeout of 3 seconds without activity has expired
  *
  ************************************************************************/
-static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
+static void mos7840_block_until_tx_empty(struct tty_struct *tty,
+				struct moschip_port *mos7840_port)
 {
 	int timeout = HZ / 10;
 	int wait = 30;
@@ -1157,7 +1158,7 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
 
 	while (1) {
 
-		count = mos7840_chars_in_buffer(mos7840_port->port);
+		count = mos7840_chars_in_buffer(tty);
 
 		/* Check for Buffer status */
 		if (count <= 0) {
@@ -1185,7 +1186,8 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
 
-static void mos7840_close(struct usb_serial_port *port, struct file *filp)
+static void mos7840_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
@@ -1226,20 +1228,17 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
 		}
 	}
 
-	if (serial->dev) {
+	if (serial->dev)
 		/* flush and block until tx is empty */
-		mos7840_block_until_tx_empty(mos7840_port);
-	}
+		mos7840_block_until_tx_empty(tty, mos7840_port);
 
 	/* While closing port, shutdown all bulk read, write  *
 	 * and interrupt read if they exists                  */
 	if (serial->dev) {
-
 		if (mos7840_port->write_urb) {
 			dbg("%s", "Shutdown bulk write\n");
 			usb_kill_urb(mos7840_port->write_urb);
 		}
-
 		if (mos7840_port->read_urb) {
 			dbg("%s", "Shutdown bulk read\n");
 			usb_kill_urb(mos7840_port->read_urb);
@@ -1247,11 +1246,10 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
 		if ((&mos7840_port->control_urb)) {
 			dbg("%s", "Shutdown control read\n");
 			//      usb_kill_urb (mos7840_port->control_urb);
-
 		}
 	}
-//              if(mos7840_port->ctrl_buf != NULL)
-//                      kfree(mos7840_port->ctrl_buf);
+//      if(mos7840_port->ctrl_buf != NULL)
+//              kfree(mos7840_port->ctrl_buf);
 	port0->open_ports--;
 	dbg("mos7840_num_open_ports in close%d:in port%d\n",
 	    port0->open_ports, port->number);
@@ -1293,15 +1291,15 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
  *
  ************************************************************************/
 
-static void mos7840_block_until_chase_response(struct moschip_port
-					       *mos7840_port)
+static void mos7840_block_until_chase_response(struct tty_struct *tty,
+					struct moschip_port *mos7840_port)
 {
 	int timeout = 1 * HZ;
 	int wait = 10;
 	int count;
 
 	while (1) {
-		count = mos7840_chars_in_buffer(mos7840_port->port);
+		count = mos7840_chars_in_buffer(tty);
 
 		/* Check for Buffer status */
 		if (count <= 0) {
@@ -1328,8 +1326,9 @@ static void mos7840_block_until_chase_response(struct moschip_port
  * mos7840_break
  *	this function sends a break to the port
  *****************************************************************************/
-static void mos7840_break(struct usb_serial_port *port, int break_state)
+static void mos7840_break(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned char data;
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
@@ -1354,17 +1353,14 @@ static void mos7840_break(struct usb_serial_port *port, int break_state)
 		return;
 	}
 
-	if (serial->dev) {
-
+	if (serial->dev)
 		/* flush and block until tx is empty */
-		mos7840_block_until_chase_response(mos7840_port);
-	}
+		mos7840_block_until_chase_response(tty, mos7840_port);
 
-	if (break_state == -1) {
+	if (break_state == -1)
 		data = mos7840_port->shadowLCR | LCR_SET_BREAK;
-	} else {
+	else
 		data = mos7840_port->shadowLCR & ~LCR_SET_BREAK;
-	}
 
 	mos7840_port->shadowLCR = data;
 	dbg("mcs7840_break mos7840_port->shadowLCR is %x\n",
@@ -1383,8 +1379,9 @@ static void mos7840_break(struct usb_serial_port *port, int break_state)
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_write_room(struct usb_serial_port *port)
+static int mos7840_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int i;
 	int room = 0;
 	unsigned long flags;
@@ -1426,7 +1423,7 @@ static int mos7840_write_room(struct usb_serial_port *port)
  *      return a negative error number.
  *****************************************************************************/
 
-static int mos7840_write(struct usb_serial_port *port,
+static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *data, int count)
 {
 	int status;
@@ -1555,8 +1552,7 @@ static int mos7840_write(struct usb_serial_port *port,
 	mos7840_port->icount.tx += transfer_size;
 	smp_wmb();
 	dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
-      exit:
-
+exit:
 	return bytes_sent;
 
 }
@@ -1567,10 +1563,10 @@ static int mos7840_write(struct usb_serial_port *port,
  *	being read from the port.
  *****************************************************************************/
 
-static void mos7840_throttle(struct usb_serial_port *port)
+static void mos7840_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7840_port;
-	struct tty_struct *tty;
 	int status;
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
@@ -1592,32 +1588,21 @@ static void mos7840_throttle(struct usb_serial_port *port)
 
 	dbg("%s", "Entering .......... \n");
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
-		status = mos7840_write(port, &stop_char, 1);
-		if (status <= 0) {
+		status = mos7840_write(tty, port, &stop_char, 1);
+		if (status <= 0)
 			return;
-		}
 	}
-
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7840_port->shadowMCR &= ~MCR_RTS;
 		status = 0;
-		status =
-		    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 					 mos7840_port->shadowMCR);
-
-		if (status < 0) {
+		if (status < 0)
 			return;
-		}
 	}
 
 	return;
@@ -1628,9 +1613,9 @@ static void mos7840_throttle(struct usb_serial_port *port)
  *	this function is called by the tty driver when it wants to resume the data
  *	being read from the port (called after SerialThrottle is called)
  *****************************************************************************/
-static void mos7840_unthrottle(struct usb_serial_port *port)
+static void mos7840_unthrottle(struct tty_struct *tty)
 {
-	struct tty_struct *tty;
+	struct usb_serial_port *port = tty->driver_data;
 	int status;
 	struct moschip_port *mos7840_port = mos7840_get_port_private(port);
 
@@ -1649,38 +1634,28 @@ static void mos7840_unthrottle(struct usb_serial_port *port)
 
 	dbg("%s", "Entering .......... \n");
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
 		unsigned char start_char = START_CHAR(tty);
-		status = mos7840_write(port, &start_char, 1);
-		if (status <= 0) {
+		status = mos7840_write(tty, port, &start_char, 1);
+		if (status <= 0)
 			return;
-		}
 	}
 
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7840_port->shadowMCR |= MCR_RTS;
 		status = 0;
-		status =
-		    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 					 mos7840_port->shadowMCR);
-		if (status < 0) {
+		if (status < 0)
 			return;
-		}
 	}
-
-	return;
 }
 
-static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file)
+static int mos7840_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7840_port;
 	unsigned int result;
 	__u16 msr;
@@ -1708,9 +1683,10 @@ static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file)
 	return result;
 }
 
-static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
+static int mos7840_tiocmset(struct tty_struct *tty, struct file *file,
 			    unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7840_port;
 	unsigned int mcr;
 	int status;
@@ -1949,10 +1925,9 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
  *      the specified new settings.
  *****************************************************************************/
 
-static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
-					 struct ktermios *old_termios)
+static void mos7840_change_port_settings(struct tty_struct *tty,
+	struct moschip_port *mos7840_port, struct ktermios *old_termios)
 {
-	struct tty_struct *tty;
 	int baud;
 	unsigned cflag;
 	unsigned iflag;
@@ -1988,8 +1963,6 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
 		return;
 	}
 
-	tty = mos7840_port->port->tty;
-
 	dbg("%s", "Entering .......... \n");
 
 	lData = LCR_BITS_8;
@@ -2131,14 +2104,14 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
  *	the termios structure
  *****************************************************************************/
 
-static void mos7840_set_termios(struct usb_serial_port *port,
+static void mos7840_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
 				struct ktermios *old_termios)
 {
 	int status;
 	unsigned int cflag;
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
-	struct tty_struct *tty;
 	dbg("mos7840_set_termios: START\n");
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port \n");
@@ -2157,8 +2130,6 @@ static void mos7840_set_termios(struct usb_serial_port *port,
 	if (mos7840_port == NULL)
 		return;
 
-	tty = port->tty;
-
 	if (!mos7840_port->open) {
 		dbg("%s - port not opened", __func__);
 		return;
@@ -2176,7 +2147,7 @@ static void mos7840_set_termios(struct usb_serial_port *port,
 
 	/* change the port settings to the new ones specified */
 
-	mos7840_change_port_settings(mos7840_port, old_termios);
+	mos7840_change_port_settings(tty, mos7840_port, old_termios);
 
 	if (!mos7840_port->read_urb) {
 		dbg("%s", "URB KILLED !!!!!\n");
@@ -2205,13 +2176,13 @@ static void mos7840_set_termios(struct usb_serial_port *port,
  * 	    allows an RS485 driver to be written in user space.
  *****************************************************************************/
 
-static int mos7840_get_lsr_info(struct moschip_port *mos7840_port,
+static int mos7840_get_lsr_info(struct tty_struct *tty,
 				unsigned int __user *value)
 {
 	int count;
 	unsigned int result = 0;
 
-	count = mos7840_chars_in_buffer(mos7840_port->port);
+	count = mos7840_chars_in_buffer(tty);
 	if (count == 0) {
 		dbg("%s -- Empty", __func__);
 		result = TIOCSER_TEMT;
@@ -2227,6 +2198,8 @@ static int mos7840_get_lsr_info(struct moschip_port *mos7840_port,
  *      function to set modem info
  *****************************************************************************/
 
+/* FIXME: Should be using the model control hooks */
+
 static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
 				  unsigned int cmd, unsigned int __user *value)
 {
@@ -2304,9 +2277,8 @@ static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
 	__u16 msr;
 	unsigned int mcr = mos7840_port->shadowMCR;
 	int status = 0;
-	status =
-	    mos7840_get_uart_reg(mos7840_port->port, MODEM_STATUS_REGISTER,
-				 &msr);
+	status = mos7840_get_uart_reg(mos7840_port->port,
+						MODEM_STATUS_REGISTER, &msr);
 	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)	/* 0x002 */
 	    |((mcr & MCR_RTS) ? TIOCM_RTS : 0)	/* 0x004 */
 	    |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)	/* 0x020 */
@@ -2359,12 +2331,12 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
  *	this function handles any ioctl calls to the driver
  *****************************************************************************/
 
-static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
+static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	void __user *argp = (void __user *)arg;
 	struct moschip_port *mos7840_port;
-	struct tty_struct *tty;
 
 	struct async_icount cnow;
 	struct async_icount cprev;
@@ -2381,8 +2353,6 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
 	if (mos7840_port == NULL)
 		return -1;
 
-	tty = mos7840_port->port->tty;
-
 	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
 
 	switch (cmd) {
@@ -2390,9 +2360,10 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
 
 	case TIOCSERGETLSR:
 		dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
-		return mos7840_get_lsr_info(mos7840_port, argp);
+		return mos7840_get_lsr_info(tty, argp);
 		return 0;
 
+	/* FIXME: use the modem hooks and remove this */
 	case TIOCMBIS:
 	case TIOCMBIC:
 	case TIOCMSET:
@@ -2463,13 +2434,9 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
 		if (copy_to_user(argp, &icount, sizeof(icount)))
 			return -EFAULT;
 		return 0;
-
-	case TIOCEXBAUD:
-		return 0;
 	default:
 		break;
 	}
-
 	return -ENOIOCTLCMD;
 }
 
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 43c8894353b..d6736531a0f 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -64,7 +64,7 @@ static void navman_read_int_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 			      urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
@@ -79,7 +79,8 @@ exit:
 			__func__, result);
 }
 
-static int navman_open(struct usb_serial_port *port, struct file *filp)
+static int navman_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int result = 0;
 
@@ -96,14 +97,15 @@ static int navman_open(struct usb_serial_port *port, struct file *filp)
 	return result;
 }
 
-static void navman_close(struct usb_serial_port *port, struct file *filp)
+static void navman_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
-static int navman_write(struct usb_serial_port *port,
+static int navman_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
 	dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 7b7422f4947..5a2d045562f 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -61,12 +61,12 @@ static int debug;
 #define BT_IGNITIONPRO_ID	0x2000  /* This one seems to be a re-branded ZyXEL device */
 
 /* function prototypes */
-static int  omninet_open		(struct usb_serial_port *port, struct file *filp);
-static void omninet_close		(struct usb_serial_port *port, struct file *filp);
+static int  omninet_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void omninet_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
 static void omninet_read_bulk_callback	(struct urb *urb);
 static void omninet_write_bulk_callback	(struct urb *urb);
-static int  omninet_write		(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  omninet_write_room		(struct usb_serial_port *port);
+static int  omninet_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  omninet_write_room		(struct tty_struct *tty);
 static void omninet_shutdown		(struct usb_serial *serial);
 static int omninet_attach		(struct usb_serial *serial);
 
@@ -157,7 +157,8 @@ static int omninet_attach (struct usb_serial *serial)
 	return 0;
 }
 
-static int omninet_open (struct usb_serial_port *port, struct file *filp)
+static int omninet_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial	*serial = port->serial;
 	struct usb_serial_port	*wport;
@@ -166,7 +167,7 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp)
 	dbg("%s - port %d", __func__, port->number);
 
 	wport = serial->port[1];
-	wport->tty = port->tty;
+	wport->port.tty = tty;		/* FIXME */
 
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev, 
@@ -181,7 +182,8 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp)
 	return result;
 }
 
-static void omninet_close (struct usb_serial_port *port, struct file * filp)
+static void omninet_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
@@ -221,9 +223,9 @@ static void omninet_read_bulk_callback (struct urb *urb)
 
 	if (urb->actual_length && header->oh_len) {
 		for (i = 0; i < header->oh_len; i++) {
-			 tty_insert_flip_char(port->tty, data[OMNINET_DATAOFFSET + i], 0);
+			 tty_insert_flip_char(port->port.tty, data[OMNINET_DATAOFFSET + i], 0);
 	  	}
-	  	tty_flip_buffer_push(port->tty);
+	  	tty_flip_buffer_push(port->port.tty);
 	}
 
 	/* Continue trying to always read  */
@@ -238,7 +240,8 @@ static void omninet_read_bulk_callback (struct urb *urb)
 	return;
 }
 
-static int omninet_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct usb_serial 	*serial	= port->serial;
 	struct usb_serial_port 	*wport	= serial->port[1];
@@ -290,8 +293,9 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
 }
 
 
-static int omninet_write_room (struct usb_serial_port *port)
+static int omninet_write_room (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial 	*serial = port->serial;
 	struct usb_serial_port 	*wport 	= serial->port[1];
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 1e936a1cbe0..4350990abf1 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -43,29 +43,23 @@
 #include <linux/usb/serial.h>
 
 /* Function prototypes */
-static int  option_open(struct usb_serial_port *port, struct file *filp);
-static void option_close(struct usb_serial_port *port, struct file *filp);
+static int  option_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void option_close(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
 static int  option_startup(struct usb_serial *serial);
 static void option_shutdown(struct usb_serial *serial);
-static void option_rx_throttle(struct usb_serial_port *port);
-static void option_rx_unthrottle(struct usb_serial_port *port);
-static int  option_write_room(struct usb_serial_port *port);
+static int  option_write_room(struct tty_struct *tty);
 
 static void option_instat_callback(struct urb *urb);
 
-static int option_write(struct usb_serial_port *port,
+static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
-
-static int  option_chars_in_buffer(struct usb_serial_port *port);
-static int  option_ioctl(struct usb_serial_port *port, struct file *file,
-			unsigned int cmd, unsigned long arg);
-static void option_set_termios(struct usb_serial_port *port,
-				struct ktermios *old);
-static void option_break_ctl(struct usb_serial_port *port, int break_state);
-static int  option_tiocmget(struct usb_serial_port *port, struct file *file);
-static int  option_tiocmset(struct usb_serial_port *port, struct file *file,
+static int  option_chars_in_buffer(struct tty_struct *tty);
+static void option_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static int  option_tiocmget(struct tty_struct *tty, struct file *file);
+static int  option_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
-static int  option_send_setup(struct usb_serial_port *port);
+static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
@@ -342,11 +336,7 @@ static struct usb_serial_driver option_1port_device = {
 	.write             = option_write,
 	.write_room        = option_write_room,
 	.chars_in_buffer   = option_chars_in_buffer,
-	.throttle          = option_rx_throttle,
-	.unthrottle        = option_rx_unthrottle,
-	.ioctl             = option_ioctl,
 	.set_termios       = option_set_termios,
-	.break_ctl         = option_break_ctl,
 	.tiocmget          = option_tiocmget,
 	.tiocmset          = option_tiocmset,
 	.attach            = option_startup,
@@ -417,33 +407,18 @@ static void __exit option_exit(void)
 module_init(option_init);
 module_exit(option_exit);
 
-static void option_rx_throttle(struct usb_serial_port *port)
-{
-	dbg("%s", __func__);
-}
-
-static void option_rx_unthrottle(struct usb_serial_port *port)
-{
-	dbg("%s", __func__);
-}
-
-static void option_break_ctl(struct usb_serial_port *port, int break_state)
-{
-	/* Unfortunately, I don't know how to send a break */
-	dbg("%s", __func__);
-}
-
-static void option_set_termios(struct usb_serial_port *port,
-			struct ktermios *old_termios)
+static void option_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	dbg("%s", __func__);
 	/* Doesn't support option setting */
-	tty_termios_copy_hw(port->tty->termios, old_termios);
-	option_send_setup(port);
+	tty_termios_copy_hw(tty->termios, old_termios);
+	option_send_setup(tty, port);
 }
 
-static int option_tiocmget(struct usb_serial_port *port, struct file *file)
+static int option_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int value;
 	struct option_port_private *portdata;
 
@@ -459,9 +434,10 @@ static int option_tiocmget(struct usb_serial_port *port, struct file *file)
 	return value;
 }
 
-static int option_tiocmset(struct usb_serial_port *port, struct file *file,
+static int option_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct option_port_private *portdata;
 
 	portdata = usb_get_serial_port_data(port);
@@ -476,17 +452,11 @@ static int option_tiocmset(struct usb_serial_port *port, struct file *file,
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return option_send_setup(port);
-}
-
-static int option_ioctl(struct usb_serial_port *port, struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-	return -ENOIOCTLCMD;
+	return option_send_setup(tty, port);
 }
 
 /* Write */
-static int option_write(struct usb_serial_port *port,
+static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
 	struct option_port_private *portdata;
@@ -562,7 +532,7 @@ static void option_indat_callback(struct urb *urb)
 		dbg("%s: nonzero status: %d on endpoint %02x.",
 		    __func__, status, endpoint);
 	} else {
-		tty = port->tty;
+		tty = port->port.tty;
 		if (urb->actual_length) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
@@ -572,7 +542,7 @@ static void option_indat_callback(struct urb *urb)
 		}
 
 		/* Resubmit urb so we continue receiving */
-		if (port->open_count && status != -ESHUTDOWN) {
+		if (port->port.count && status != -ESHUTDOWN) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err)
 				printk(KERN_ERR "%s: resubmit read urb failed. "
@@ -638,9 +608,9 @@ static void option_instat_callback(struct urb *urb)
 			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
 			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
 
-			if (port->tty && !C_CLOCAL(port->tty) &&
+			if (port->port.tty && !C_CLOCAL(port->port.tty) &&
 					old_dcd_state && !portdata->dcd_state)
-				tty_hangup(port->tty);
+				tty_hangup(port->port.tty);
 		} else {
 			dbg("%s: type %x req %x", __func__,
 				req_pkt->bRequestType,req_pkt->bRequest);
@@ -658,8 +628,9 @@ static void option_instat_callback(struct urb *urb)
 	}
 }
 
-static int option_write_room(struct usb_serial_port *port)
+static int option_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct option_port_private *portdata;
 	int i;
 	int data_len = 0;
@@ -678,8 +649,9 @@ static int option_write_room(struct usb_serial_port *port)
 	return data_len;
 }
 
-static int option_chars_in_buffer(struct usb_serial_port *port)
+static int option_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct option_port_private *portdata;
 	int i;
 	int data_len = 0;
@@ -698,7 +670,8 @@ static int option_chars_in_buffer(struct usb_serial_port *port)
 	return data_len;
 }
 
-static int option_open(struct usb_serial_port *port, struct file *filp)
+static int option_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct option_port_private *portdata;
 	struct usb_serial *serial = port->serial;
@@ -748,14 +721,16 @@ static int option_open(struct usb_serial_port *port, struct file *filp)
 				usb_pipeout(urb->pipe), 0); */
 	}
 
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
-	option_send_setup(port);
+	option_send_setup(tty, port);
 
 	return (0);
 }
 
-static void option_close(struct usb_serial_port *port, struct file *filp)
+static void option_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int i;
 	struct usb_serial *serial = port->serial;
@@ -770,7 +745,7 @@ static void option_close(struct usb_serial_port *port, struct file *filp)
 	if (serial->dev) {
 		mutex_lock(&serial->disc_mutex);
 		if (!serial->disconnected)
-			option_send_setup(port);
+			option_send_setup(tty, port);
 		mutex_unlock(&serial->disc_mutex);
 
 		/* Stop reading/writing urbs */
@@ -779,7 +754,7 @@ static void option_close(struct usb_serial_port *port, struct file *filp)
 		for (i = 0; i < N_OUT_URB; i++)
 			usb_kill_urb(portdata->out_urbs[i]);
 	}
-	port->tty = NULL;
+	port->port.tty = NULL;	/* FIXME */
 }
 
 /* Helper functions used by option_setup_urbs */
@@ -841,7 +816,8 @@ static void option_setup_urbs(struct usb_serial *serial)
  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
  * CDC.
 */
-static int option_send_setup(struct usb_serial_port *port)
+static int option_send_setup(struct tty_struct *tty,
+						struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct option_port_private *portdata;
@@ -850,7 +826,7 @@ static int option_send_setup(struct usb_serial_port *port)
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (port->tty) {
+	if (tty) {
 		int val = 0;
 		if (portdata->dtr_state)
 			val |= 0x01;
@@ -861,7 +837,6 @@ static int option_send_setup(struct usb_serial_port *port)
 				usb_rcvctrlpipe(serial->dev, 0),
 				0x22,0x21,val,ifNum,NULL,0,USB_CTRL_SET_TIMEOUT);
 	}
-
 	return 0;
 }
 
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index a9625c180dc..069d276a527 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -140,22 +140,23 @@ struct oti6858_control_pkt {
 	  && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt) )
 
 /* function prototypes */
-static int oti6858_open(struct usb_serial_port *port, struct file *filp);
-static void oti6858_close(struct usb_serial_port *port, struct file *filp);
-static void oti6858_set_termios(struct usb_serial_port *port,
-				struct ktermios *old);
-static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
+static int oti6858_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void oti6858_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void oti6858_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
 static void oti6858_read_int_callback(struct urb *urb);
 static void oti6858_read_bulk_callback(struct urb *urb);
 static void oti6858_write_bulk_callback(struct urb *urb);
-static int oti6858_write(struct usb_serial_port *port,
+static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
-static int oti6858_write_room(struct usb_serial_port *port);
-static void oti6858_break_ctl(struct usb_serial_port *port, int break_state);
-static int oti6858_chars_in_buffer(struct usb_serial_port *port);
-static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file);
-static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
+static int oti6858_write_room(struct tty_struct *tty);
+static int oti6858_chars_in_buffer(struct tty_struct *tty);
+static int oti6858_tiocmget(struct tty_struct *tty, struct file *file);
+static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
 static int oti6858_startup(struct usb_serial *serial);
 static void oti6858_shutdown(struct usb_serial *serial);
@@ -184,7 +185,6 @@ static struct usb_serial_driver oti6858_device = {
 	.close =		oti6858_close,
 	.write =		oti6858_write,
 	.ioctl =		oti6858_ioctl,
-	.break_ctl =		oti6858_break_ctl,
 	.set_termios =		oti6858_set_termios,
 	.tiocmget =		oti6858_tiocmget,
 	.tiocmset =		oti6858_tiocmset,
@@ -395,7 +395,7 @@ static int oti6858_startup(struct usb_serial *serial)
 	return -ENOMEM;
 }
 
-static int oti6858_write(struct usb_serial_port *port,
+static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
@@ -413,8 +413,9 @@ static int oti6858_write(struct usb_serial_port *port,
 	return count;
 }
 
-static int oti6858_write_room(struct usb_serial_port *port)
+static int oti6858_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -428,8 +429,9 @@ static int oti6858_write_room(struct usb_serial_port *port)
 	return room;
 }
 
-static int oti6858_chars_in_buffer(struct usb_serial_port *port)
+static int oti6858_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -443,8 +445,8 @@ static int oti6858_chars_in_buffer(struct usb_serial_port *port)
 	return chars;
 }
 
-static void oti6858_set_termios(struct usb_serial_port *port,
-				struct ktermios *old_termios)
+static void oti6858_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -455,22 +457,22 @@ static void oti6858_set_termios(struct usb_serial_port *port,
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	if (!port->tty || !port->tty->termios) {
+	if (!tty) {
 		dbg("%s(): no tty structures", __func__);
 		return;
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->flags.termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+		*(tty->termios) = tty_std_termios;
+		tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+		tty->termios->c_ispeed = 38400;
+		tty->termios->c_ospeed = 38400;
 		priv->flags.termios_initialized = 1;
-		port->tty->termios->c_ispeed = 38400;
-		port->tty->termios->c_ospeed = 38400;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	cflag = port->tty->termios->c_cflag;
+	cflag = tty->termios->c_cflag;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	divisor = priv->pending_setup.divisor;
@@ -500,7 +502,7 @@ static void oti6858_set_termios(struct usb_serial_port *port,
 	 * guarantee that any other baud rate will work (especially
 	 * the higher ones)
 	 */
-	br = tty_get_baud_rate(port->tty);
+	br = tty_get_baud_rate(tty);
 	if (br == 0) {
 		divisor = 0;
 	} else {
@@ -511,7 +513,7 @@ static void oti6858_set_termios(struct usb_serial_port *port,
 		new_divisor = (96000000 + 8 * br) / (16 * br);
 		real_br = 96000000 / (16 * new_divisor);
 		divisor = cpu_to_le16(new_divisor);
-		tty_encode_baud_rate(port->tty, real_br, real_br);
+		tty_encode_baud_rate(tty, real_br, real_br);
 	}
 
 	frame_fmt &= ~FMT_STOP_BITS_MASK;
@@ -564,7 +566,8 @@ static void oti6858_set_termios(struct usb_serial_port *port,
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static int oti6858_open(struct usb_serial_port *port, struct file *filp)
+static int oti6858_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	struct ktermios tmp_termios;
@@ -578,7 +581,7 @@ static int oti6858_open(struct usb_serial_port *port, struct file *filp)
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
-	if (port->open_count != 1)
+	if (port->port.count != 1)
 		return 0;
 
 	if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
@@ -617,18 +620,19 @@ static int oti6858_open(struct usb_serial_port *port, struct file *filp)
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
-		oti6858_close(port, NULL);
+		oti6858_close(tty, port, NULL);
 		return -EPROTO;
 	}
 
 	/* setup termios */
-	if (port->tty)
-		oti6858_set_termios(port, &tmp_termios);
+	if (tty)
+		oti6858_set_termios(tty, port, &tmp_termios);
 
 	return 0;
 }
 
-static void oti6858_close(struct usb_serial_port *port, struct file *filp)
+static void oti6858_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -641,7 +645,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp)
 	spin_lock_irqsave(&priv->lock, flags);
 	timeout = 30 * HZ;	/* PL2303_CLOSING_WAIT */
 	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&port->tty->write_wait, &wait);
+	add_wait_queue(&tty->write_wait, &wait);
 	dbg("%s(): entering wait loop", __func__);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -654,7 +658,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp)
 		spin_lock_irqsave(&priv->lock, flags);
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->tty->write_wait, &wait);
+	remove_wait_queue(&tty->write_wait, &wait);
 	dbg("%s(): after wait loop", __func__);
 
 	/* clear out any remaining data in the buffer */
@@ -669,7 +673,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp)
 	/* data is in the buffer to compute a delay */
 	/* that is not unnecessarily long) */
 	/* FIXME
-	bps = tty_get_baud_rate(port->tty);
+	bps = tty_get_baud_rate(tty);
 	if (bps > 1200)
 		timeout = max((HZ*2560)/bps,HZ/10);
 	else
@@ -690,7 +694,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp)
 	usb_kill_urb(port->interrupt_in_urb);
 
 	/*
-	if (port->tty && (port->tty->termios->c_cflag) & HUPCL) {
+	if (tty && (tty->termios->c_cflag) & HUPCL) {
 		// drop DTR and RTS
 		spin_lock_irqsave(&priv->lock, flags);
 		priv->pending_setup.control &= ~CONTROL_MASK;
@@ -699,9 +703,10 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp)
 	*/
 }
 
-static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
+static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
@@ -732,8 +737,9 @@ static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
 	return 0;
 }
 
-static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file)
+static int oti6858_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned pin_state;
@@ -802,26 +808,15 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
-static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
+static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
-	void __user *user_arg = (void __user *) arg;
-	unsigned int x;
+	struct usb_serial_port *port = tty->driver_data;
 
 	dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
 				__func__, port->number, cmd, arg);
 
 	switch (cmd) {
-		case TIOCMBIS:
-			if (copy_from_user(&x, user_arg, sizeof(x)))
-				return -EFAULT;
-			return oti6858_tiocmset(port, NULL, x, 0);
-
-		case TIOCMBIC:
-			if (copy_from_user(&x, user_arg, sizeof(x)))
-				return -EFAULT;
-			return oti6858_tiocmset(port, NULL, 0, x);
-
 		case TIOCMIWAIT:
 			dbg("%s(): TIOCMIWAIT", __func__);
 			return wait_modem_info(port, arg);
@@ -834,24 +829,6 @@ static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static void oti6858_break_ctl(struct usb_serial_port *port, int break_state)
-{
-	int state;
-
-	dbg("%s(port = %d)", __func__, port->number);
-
-	state = (break_state == 0) ? 0 : 1;
-	dbg("%s(): turning break %s", __func__, state ? "on" : "off");
-
-	/* FIXME */
-/*
-	result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
-				  BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
-				  0, NULL, 0, 100);
-	if (result != 0)
-		dbg("%s(): error sending break", __func__);
- */
-}
 
 static void oti6858_shutdown(struct usb_serial *serial)
 {
@@ -1002,7 +979,7 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (status != 0) {
-		if (!port->open_count) {
+		if (!port->port.count) {
 			dbg("%s(): port is closed, exiting", __func__);
 			return;
 		}
@@ -1020,14 +997,14 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty != NULL && urb->actual_length > 0) {
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
 
 	// schedule the interrupt urb if we are still open */
-	if (port->open_count != 0) {
+	if (port->port.count != 0) {
 		port->interrupt_in_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 		if (result != 0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 2a0dd1b50dc..a0016725d31 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -458,8 +458,8 @@ static void pl2303_send(struct usb_serial_port *port)
 	usb_serial_port_softint(port);
 }
 
-static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
-			int count)
+static int pl2303_write(struct tty_struct *tty, struct usb_serial_port *port,
+				const unsigned char *buf, int count)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -478,8 +478,9 @@ static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
 	return count;
 }
 
-static int pl2303_write_room(struct usb_serial_port *port)
+static int pl2303_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -494,8 +495,9 @@ static int pl2303_write_room(struct usb_serial_port *port)
 	return room;
 }
 
-static int pl2303_chars_in_buffer(struct usb_serial_port *port)
+static int pl2303_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -510,8 +512,8 @@ static int pl2303_chars_in_buffer(struct usb_serial_port *port)
 	return chars;
 }
 
-static void pl2303_set_termios(struct usb_serial_port *port,
-			       struct ktermios *old_termios)
+static void pl2303_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -526,11 +528,10 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B9600 | CS8 | CREAD |
-					      HUPCL | CLOCAL;
-		port->tty->termios->c_ispeed = 9600;
-		port->tty->termios->c_ospeed = 9600;
+		*(tty->termios) = tty_std_termios;
+		tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+		tty->termios->c_ispeed = 9600;
+		tty->termios->c_ospeed = 9600;
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -539,16 +540,16 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 	   serial settings even to the same values as before. Thus
 	   we actually need to filter in this specific case */
 
-	if (!tty_termios_hw_change(port->tty->termios, old_termios))
+	if (!tty_termios_hw_change(tty->termios, old_termios))
 		return;
 
-	cflag = port->tty->termios->c_cflag;
+	cflag = tty->termios->c_cflag;
 
 	buf = kzalloc(7, GFP_KERNEL);
 	if (!buf) {
 		dev_err(&port->dev, "%s - out of memory.\n", __func__);
 		/* Report back no change occurred */
-		*port->tty->termios = *old_termios;
+		*tty->termios = *old_termios;
 		return;
 	}
 
@@ -569,7 +570,7 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 		dbg("%s - data bits = %d", __func__, buf[6]);
 	}
 
-	baud = tty_get_baud_rate(port->tty);;
+	baud = tty_get_baud_rate(tty);
 	dbg("%s - baud = %d", __func__, baud);
 	if (baud) {
 		buf[0] = baud & 0xff;
@@ -646,12 +647,13 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 
 	/* FIXME: Need to read back resulting baud rate */
 	if (baud)
-		tty_encode_baud_rate(port->tty, baud, baud);
+		tty_encode_baud_rate(tty, baud, baud);
 
 	kfree(buf);
 }
 
-static void pl2303_close(struct usb_serial_port *port, struct file *filp)
+static void pl2303_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -666,7 +668,7 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp)
 	spin_lock_irqsave(&priv->lock, flags);
 	timeout = PL2303_CLOSING_WAIT;
 	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&port->tty->write_wait, &wait);
+	add_wait_queue(&tty->write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (pl2303_buf_data_avail(priv->buf) == 0 ||
@@ -678,7 +680,7 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp)
 		spin_lock_irqsave(&priv->lock, flags);
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->tty->write_wait, &wait);
+	remove_wait_queue(&tty->write_wait, &wait);
 	/* clear out any remaining data in the buffer */
 	pl2303_buf_clear(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -690,7 +692,7 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp)
 	/* for lower rates we should really know how much */
 	/* data is in the buffer to compute a delay */
 	/* that is not unnecessarily long) */
-	bps = tty_get_baud_rate(port->tty);
+	bps = tty_get_baud_rate(tty);
 	if (bps > 1200)
 		timeout = max((HZ*2560)/bps,HZ/10);
 	else
@@ -703,8 +705,8 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp)
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
-	if (port->tty) {
-		c_cflag = port->tty->termios->c_cflag;
+	if (tty) {
+		c_cflag = tty->termios->c_cflag;
 		if (c_cflag & HUPCL) {
 			/* drop DTR and RTS */
 			spin_lock_irqsave(&priv->lock, flags);
@@ -715,7 +717,8 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp)
 	}
 }
 
-static int pl2303_open(struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -734,9 +737,8 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp)
 	}
 
 	/* Setup termios */
-	if (port->tty) {
-		pl2303_set_termios(port, &tmp_termios);
-	}
+	if (tty)
+		pl2303_set_termios(tty, port, &tmp_termios);
 
 	//FIXME: need to assert RTS and DTR if CRTSCTS off
 
@@ -746,7 +748,7 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp)
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(port, NULL);
+		pl2303_close(tty, port, NULL);
 		return -EPROTO;
 	}
 
@@ -756,15 +758,16 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp)
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(port, NULL);
+		pl2303_close(tty, port, NULL);
 		return -EPROTO;
 	}
 	return 0;
 }
 
-static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
+static int pl2303_tiocmset(struct tty_struct *tty, struct file *file,
 			   unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
@@ -787,8 +790,9 @@ static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
 	return set_control_lines(port->serial->dev, control);
 }
 
-static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file)
+static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int mcr;
@@ -853,9 +857,10 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
-static int pl2303_ioctl(struct usb_serial_port *port, struct file *file,
+static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 
 	switch (cmd) {
@@ -871,8 +876,9 @@ static int pl2303_ioctl(struct usb_serial_port *port, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static void pl2303_break_ctl(struct usb_serial_port *port, int break_state)
+static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	u16 state;
 	int result;
@@ -1001,7 +1007,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 
 	if (status) {
 		dbg("%s - urb status = %d", __func__, status);
-		if (!port->open_count) {
+		if (!port->port.count) {
 			dbg("%s - port is closed, exiting.", __func__);
 			return;
 		}
@@ -1044,7 +1050,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 		tty_flag = TTY_FRAME;
 	dbg("%s - tty_flag = %d", __func__, tty_flag);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
@@ -1056,7 +1062,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 	}
 
 	/* Schedule the next read _if_ we are still open */
-	if (port->open_count) {
+	if (port->port.count) {
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result)
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 94bddf06ea4..f823e4dcea1 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -229,8 +229,8 @@ static void safe_read_bulk_callback (struct urb *urb)
 			int actual_length = data[length - 2] >> 2;
 			if (actual_length <= (length - 2)) {
 				info ("%s - actual: %d", __func__, actual_length);
-				tty_insert_flip_string(port->tty, data, actual_length);
-				tty_flip_buffer_push (port->tty);
+				tty_insert_flip_string(port->port.tty, data, actual_length);
+				tty_flip_buffer_push (port->port.tty);
 			} else {
 				err ("%s - inconsistent lengths %d:%d", __func__,
 				     actual_length, length);
@@ -239,8 +239,8 @@ static void safe_read_bulk_callback (struct urb *urb)
 			err ("%s - bad CRC %x", __func__, fcs);
 		}
 	} else {
-		tty_insert_flip_string(port->tty, data, length);
-		tty_flip_buffer_push (port->tty);
+		tty_insert_flip_string(port->port.tty, data, length);
+		tty_flip_buffer_push (port->port.tty);
 	}
 
 	/* Continue trying to always read  */
@@ -255,7 +255,8 @@ static void safe_read_bulk_callback (struct urb *urb)
 	}
 }
 
-static int safe_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	unsigned char *data;
 	int result;
@@ -349,8 +350,9 @@ static int safe_write (struct usb_serial_port *port, const unsigned char *buf, i
 	return (count);
 }
 
-static int safe_write_room (struct usb_serial_port *port)
+static int safe_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int room = 0;		/* Default: no room */
 	unsigned long flags;
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 29074c1ba22..892020d4855 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -250,7 +250,8 @@ struct sierra_port_private {
 	int ri_state;
 };
 
-static int sierra_send_setup(struct usb_serial_port *port)
+static int sierra_send_setup(struct tty_struct *tty,
+						struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
@@ -260,7 +261,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (port->tty) {
+	if (tty) {
 		int val = 0;
 		if (portdata->dtr_state)
 			val |= 0x01;
@@ -284,32 +285,17 @@ static int sierra_send_setup(struct usb_serial_port *port)
 	return 0;
 }
 
-static void sierra_rx_throttle(struct usb_serial_port *port)
+static void sierra_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	dbg("%s", __func__);
+	tty_termios_copy_hw(tty->termios, old_termios);
+	sierra_send_setup(tty, port);
 }
 
-static void sierra_rx_unthrottle(struct usb_serial_port *port)
-{
-	dbg("%s", __func__);
-}
-
-static void sierra_break_ctl(struct usb_serial_port *port, int break_state)
-{
-	/* Unfortunately, I don't know how to send a break */
-	dbg("%s", __func__);
-}
-
-static void sierra_set_termios(struct usb_serial_port *port,
-			struct ktermios *old_termios)
-{
-	dbg("%s", __func__);
-	tty_termios_copy_hw(port->tty->termios, old_termios);
-	sierra_send_setup(port);
-}
-
-static int sierra_tiocmget(struct usb_serial_port *port, struct file *file)
+static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int value;
 	struct sierra_port_private *portdata;
 
@@ -325,9 +311,10 @@ static int sierra_tiocmget(struct usb_serial_port *port, struct file *file)
 	return value;
 }
 
-static int sierra_tiocmset(struct usb_serial_port *port, struct file *file,
+static int sierra_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct sierra_port_private *portdata;
 
 	portdata = usb_get_serial_port_data(port);
@@ -341,13 +328,7 @@ static int sierra_tiocmset(struct usb_serial_port *port, struct file *file,
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return sierra_send_setup(port);
-}
-
-static int sierra_ioctl(struct usb_serial_port *port, struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-	return -ENOIOCTLCMD;
+	return sierra_send_setup(tty, port);
 }
 
 static void sierra_outdat_callback(struct urb *urb)
@@ -374,8 +355,8 @@ static void sierra_outdat_callback(struct urb *urb)
 }
 
 /* Write */
-static int sierra_write(struct usb_serial_port *port,
-			const unsigned char *buf, int count)
+static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
@@ -463,7 +444,7 @@ static void sierra_indat_callback(struct urb *urb)
 		dbg("%s: nonzero status: %d on endpoint %02x.",
 		    __func__, status, endpoint);
 	} else {
-		tty = port->tty;
+		tty = port->port.tty;
 		if (urb->actual_length) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
@@ -473,7 +454,7 @@ static void sierra_indat_callback(struct urb *urb)
 		}
 
 		/* Resubmit urb so we continue receiving */
-		if (port->open_count && status != -ESHUTDOWN) {
+		if (port->port.count && status != -ESHUTDOWN) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err)
 				dev_err(&port->dev, "resubmit read urb failed."
@@ -517,9 +498,9 @@ static void sierra_instat_callback(struct urb *urb)
 			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
 			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
 
-			if (port->tty && !C_CLOCAL(port->tty) &&
+			if (port->port.tty && !C_CLOCAL(port->port.tty) &&
 					old_dcd_state && !portdata->dcd_state)
-				tty_hangup(port->tty);
+				tty_hangup(port->port.tty);
 		} else {
 			dbg("%s: type %x req %x", __func__,
 				req_pkt->bRequestType, req_pkt->bRequest);
@@ -537,8 +518,9 @@ static void sierra_instat_callback(struct urb *urb)
 	}
 }
 
-static int sierra_write_room(struct usb_serial_port *port)
+static int sierra_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -557,22 +539,8 @@ static int sierra_write_room(struct usb_serial_port *port)
 	return 2048;
 }
 
-static int sierra_chars_in_buffer(struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-
-	/*
-	 * We can't really account for how much data we
-	 * have sent out, but hasn't made it through to the
-	 * device as we can't see the backend here, so just
-	 * tell the tty layer that everything is flushed.
-	 *
-	 * FIXME: should walk the outstanding urbs info
-	 */
-	return 0;
-}
-
-static int sierra_open(struct usb_serial_port *port, struct file *filp)
+static int sierra_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct sierra_port_private *portdata;
 	struct usb_serial *serial = port->serial;
@@ -612,9 +580,10 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp)
 		}
 	}
 
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
-	sierra_send_setup(port);
+	sierra_send_setup(tty, port);
 
 	/* start up the interrupt endpoint if we have one */
 	if (port->interrupt_in_urb) {
@@ -626,7 +595,8 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp)
 	return 0;
 }
 
-static void sierra_close(struct usb_serial_port *port, struct file *filp)
+static void sierra_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int i;
 	struct usb_serial *serial = port->serial;
@@ -641,7 +611,7 @@ static void sierra_close(struct usb_serial_port *port, struct file *filp)
 	if (serial->dev) {
 		mutex_lock(&serial->disc_mutex);
 		if (!serial->disconnected)
-			sierra_send_setup(port);
+			sierra_send_setup(tty, port);
 		mutex_unlock(&serial->disc_mutex);
 
 		/* Stop reading/writing urbs */
@@ -651,7 +621,7 @@ static void sierra_close(struct usb_serial_port *port, struct file *filp)
 
 	usb_kill_urb(port->interrupt_in_urb);
 
-	port->tty = NULL;
+	port->port.tty = NULL;	/* FIXME */
 }
 
 static int sierra_startup(struct usb_serial *serial)
@@ -754,12 +724,7 @@ static struct usb_serial_driver sierra_device = {
 	.close             = sierra_close,
 	.write             = sierra_write,
 	.write_room        = sierra_write_room,
-	.chars_in_buffer   = sierra_chars_in_buffer,
-	.throttle          = sierra_rx_throttle,
-	.unthrottle        = sierra_rx_unthrottle,
-	.ioctl             = sierra_ioctl,
 	.set_termios       = sierra_set_termios,
-	.break_ctl         = sierra_break_ctl,
 	.tiocmget          = sierra_tiocmget,
 	.tiocmset          = sierra_tiocmset,
 	.attach            = sierra_startup,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 55b2570b8b8..58495f5cca1 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -448,7 +448,8 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
 
 /* close the serial port. We should wait for data sending to device 1st and
  * then kill all urb. */
-static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
+static void spcp8x5_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -464,7 +465,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
 	spin_lock_irqsave(&priv->lock, flags);
 	timeout = SPCP8x5_CLOSING_WAIT;
 	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&port->tty->write_wait, &wait);
+	add_wait_queue(&tty->write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (ringbuf_avail_data(priv->buf) == 0 ||
@@ -475,7 +476,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
 		spin_lock_irqsave(&priv->lock, flags);
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->tty->write_wait, &wait);
+	remove_wait_queue(&tty->write_wait, &wait);
 
 	/* clear out any remaining data in the buffer */
 	clear_ringbuf(priv->buf);
@@ -486,7 +487,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
 	 * flow control for data rates of 1200 bps or more, for lower rates we
 	 * should really know how much data is in the buffer to compute a delay
 	 * that is not unnecessarily long) */
-	bps = tty_get_baud_rate(port->tty);
+	bps = tty_get_baud_rate(tty);
 	if (bps > 1200)
 		timeout = max((HZ*2560) / bps, HZ/10);
 	else
@@ -495,8 +496,8 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
 	schedule_timeout(timeout);
 
 	/* clear control lines */
-	if (port->tty) {
-		c_cflag = port->tty->termios->c_cflag;
+	if (tty) {
+		c_cflag = tty->termios->c_cflag;
 		if (c_cflag & HUPCL) {
 			spin_lock_irqsave(&priv->lock, flags);
 			priv->line_control = 0;
@@ -518,14 +519,14 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
 }
 
 /* set the serial param for transfer. we should check if we really need to
- * transfer. then if be set flow contorl we should do this too. */
-static void spcp8x5_set_termios(struct usb_serial_port *port,
-				struct ktermios *old_termios)
+ * transfer. if we set flow control we should do this too. */
+static void spcp8x5_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int cflag = port->tty->termios->c_cflag;
+	unsigned int cflag = tty->termios->c_cflag;
 	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned short uartdata;
 	unsigned char buf[2] = {0, 0};
@@ -533,21 +534,19 @@ static void spcp8x5_set_termios(struct usb_serial_port *port,
 	int i;
 	u8 control;
 
-	if ((!port->tty) || (!port->tty->termios))
-		return;
-
 	/* for the 1st time call this function */
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B115200 | CS8 | CREAD |
-					      HUPCL | CLOCAL;
+		*(tty->termios) = tty_std_termios;
+		tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+		tty->termios->c_ispeed = 115200;
+		tty->termios->c_ospeed = 115200;
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* check that they really want us to change something */
-	if (!tty_termios_hw_change(port->tty->termios, old_termios))
+	if (!tty_termios_hw_change(tty->termios, old_termios))
 		return;
 
 	/* set DTR/RTS active */
@@ -567,7 +566,7 @@ static void spcp8x5_set_termios(struct usb_serial_port *port,
 	}
 
 	/* Set Baud Rate */
-	baud = tty_get_baud_rate(port->tty);;
+	baud = tty_get_baud_rate(tty);;
 	switch (baud) {
 	case 300:	buf[0] = 0x00;	break;
 	case 600:	buf[0] = 0x01;	break;
@@ -643,7 +642,8 @@ static void spcp8x5_set_termios(struct usb_serial_port *port,
 
 /* open the serial port. do some usb system call. set termios and get the line
  * status of the device. then submit the read urb */
-static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
+static int spcp8x5_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -665,7 +665,7 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
 		return ret;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (port->tty->termios->c_cflag & CBAUD)
+	if (tty && (tty->termios->c_cflag & CBAUD))
 		priv->line_control = MCR_DTR | MCR_RTS;
 	else
 		priv->line_control = 0;
@@ -674,8 +674,8 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
 	spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
 
 	/* Setup termios */
-	if (port->tty)
-		spcp8x5_set_termios(port, &tmp_termios);
+	if (tty)
+		spcp8x5_set_termios(tty, port, &tmp_termios);
 
 	spcp8x5_get_msr(serial->dev, &status, priv->type);
 
@@ -690,7 +690,7 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
 	port->read_urb->dev = serial->dev;
 	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (ret) {
-		spcp8x5_close(port, NULL);
+		spcp8x5_close(tty, port, NULL);
 		return -EPROTO;
 	}
 	return 0;
@@ -717,7 +717,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 
 	/* check the urb status */
 	if (urb->status) {
-		if (!port->open_count)
+		if (!port->port.count)
 			return;
 		if (urb->status == -EPROTO) {
 			/* spcp8x5 mysteriously fails with -EPROTO */
@@ -755,7 +755,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 		tty_flag = TTY_FRAME;
 	dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
@@ -767,7 +767,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 	}
 
 	/* Schedule the next read _if_ we are still open */
-	if (port->open_count) {
+	if (port->port.count) {
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb , GFP_ATOMIC);
 		if (result)
@@ -866,7 +866,7 @@ static void spcp8x5_write_bulk_callback(struct urb *urb)
 }
 
 /* write data to ring buffer. and then start the write transfer */
-static int spcp8x5_write(struct usb_serial_port *port,
+static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
@@ -925,9 +925,10 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
 	return 0;
 }
 
-static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file,
+static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 
 	switch (cmd) {
@@ -943,9 +944,10 @@ static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file,
+static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
 			    unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
@@ -965,8 +967,9 @@ static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file,
 	return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
 }
 
-static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file)
+static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int mcr;
@@ -989,8 +992,9 @@ static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file)
 }
 
 /* get the avail space room in ring buffer */
-static int spcp8x5_write_room(struct usb_serial_port *port)
+static int spcp8x5_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -1003,8 +1007,9 @@ static int spcp8x5_write_room(struct usb_serial_port *port)
 }
 
 /* get the number of avail data in write ring buffer */
-static int spcp8x5_chars_in_buffer(struct usb_serial_port *port)
+static int spcp8x5_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a26a629dfc4..48831a755fc 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -70,6 +70,7 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/firmware.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
@@ -149,21 +150,23 @@ struct ti_device {
 
 static int ti_startup(struct usb_serial *serial);
 static void ti_shutdown(struct usb_serial *serial);
-static int ti_open(struct usb_serial_port *port, struct file *file);
-static void ti_close(struct usb_serial_port *port, struct file *file);
-static int ti_write(struct usb_serial_port *port, const unsigned char *data,
-	int count);
-static int ti_write_room(struct usb_serial_port *port);
-static int ti_chars_in_buffer(struct usb_serial_port *port);
-static void ti_throttle(struct usb_serial_port *port);
-static void ti_unthrottle(struct usb_serial_port *port);
-static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
-static void ti_set_termios(struct usb_serial_port *port,
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *file);
+static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *file);
+static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
+				const unsigned char *data, int count);
+static int ti_write_room(struct tty_struct *tty);
+static int ti_chars_in_buffer(struct tty_struct *tty);
+static void ti_throttle(struct tty_struct *tty);
+static void ti_unthrottle(struct tty_struct *tty);
+static int ti_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port,
 	struct ktermios *old_termios);
-static int ti_tiocmget(struct usb_serial_port *port, struct file *file);
-static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
+static int ti_tiocmget(struct tty_struct *tty, struct file *file);
+static int ti_tiocmset(struct tty_struct *tty, struct file *file,
 	unsigned int set, unsigned int clear);
-static void ti_break(struct usb_serial_port *port, int break_state);
+static void ti_break(struct tty_struct *tty, int break_state);
 static void ti_interrupt_callback(struct urb *urb);
 static void ti_bulk_in_callback(struct urb *urb);
 static void ti_bulk_out_callback(struct urb *urb);
@@ -192,8 +195,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 	__u8 mask, __u8 byte);
 
-static int ti_download_firmware(struct ti_device *tdev, char *fw_name);
-
+static int ti_download_firmware(struct ti_device *tdev, int type);
 
 /* circular buffer */
 static struct circ_buf *ti_buf_alloc(void);
@@ -430,11 +432,10 @@ static int ti_startup(struct usb_serial *serial)
 
 	/* if we have only 1 configuration, download firmware */
 	if (dev->descriptor.bNumConfigurations == 1) {
-
 		if (tdev->td_is_3410)
-			status = ti_download_firmware(tdev, "ti_3410.fw");
+			status = ti_download_firmware(tdev, 3410);
 		else
-			status = ti_download_firmware(tdev, "ti_5052.fw");
+			status = ti_download_firmware(tdev, 5052);
 		if (status)
 			goto free_tdev;
 
@@ -519,7 +520,8 @@ static void ti_shutdown(struct usb_serial *serial)
 }
 
 
-static int ti_open(struct usb_serial_port *port, struct file *file)
+static int ti_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *file)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct ti_device *tdev;
@@ -543,9 +545,9 @@ static int ti_open(struct usb_serial_port *port, struct file *file)
 	if (mutex_lock_interruptible(&tdev->td_open_close_lock))
 		return -ERESTARTSYS;
 
-	if (port->tty)
-		port->tty->low_latency = 
-			(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	if (tty)
+		tty->low_latency =
+				(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	port_number = port->number - port->serial->minor;
 
@@ -573,7 +575,8 @@ static int ti_open(struct usb_serial_port *port, struct file *file)
 		}
 	}
 
-	ti_set_termios(port, port->tty->termios);
+	if (tty)
+		ti_set_termios(tty, port, tty->termios);
 
 	dbg("%s - sending TI_OPEN_PORT", __func__);
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -610,7 +613,8 @@ static int ti_open(struct usb_serial_port *port, struct file *file)
 	usb_clear_halt(dev, port->write_urb->pipe);
 	usb_clear_halt(dev, port->read_urb->pipe);
 
-	ti_set_termios(port, port->tty->termios);
+	if (tty)
+		ti_set_termios(tty, port, tty->termios);
 
 	dbg("%s - sending TI_OPEN_PORT (2)", __func__);
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -661,7 +665,8 @@ release_lock:
 }
 
 
-static void ti_close(struct usb_serial_port *port, struct file *file)
+static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *file)
 {
 	struct ti_device *tdev;
 	struct ti_port *tport;
@@ -707,8 +712,8 @@ static void ti_close(struct usb_serial_port *port, struct file *file)
 }
 
 
-static int ti_write(struct usb_serial_port *port, const unsigned char *data,
-	int count)
+static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *data, int count)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -733,8 +738,9 @@ static int ti_write(struct usb_serial_port *port, const unsigned char *data,
 }
 
 
-static int ti_write_room(struct usb_serial_port *port)
+static int ti_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -753,8 +759,9 @@ static int ti_write_room(struct usb_serial_port *port)
 }
 
 
-static int ti_chars_in_buffer(struct usb_serial_port *port)
+static int ti_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -773,32 +780,26 @@ static int ti_chars_in_buffer(struct usb_serial_port *port)
 }
 
 
-static void ti_throttle(struct usb_serial_port *port)
+static void ti_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	if (tport == NULL)
 		return;
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty", __func__);
-		return;
-	}
-
 	if (I_IXOFF(tty) || C_CRTSCTS(tty))
 		ti_stop_read(tport, tty);
 
 }
 
 
-static void ti_unthrottle(struct usb_serial_port *port)
+static void ti_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -806,12 +807,6 @@ static void ti_unthrottle(struct usb_serial_port *port)
 	if (tport == NULL)
 		return;
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty", __func__);
-		return;
-	}
-
 	if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
 		status = ti_restart_read(tport, tty);
 		if (status)
@@ -820,9 +815,10 @@ static void ti_unthrottle(struct usb_serial_port *port)
 }
 
 
-static int ti_ioctl(struct usb_serial_port *port, struct file *file,
+static int ti_ioctl(struct tty_struct *tty, struct file *file,
 	unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct async_icount cnow;
 	struct async_icount cprev;
@@ -875,11 +871,10 @@ static int ti_ioctl(struct usb_serial_port *port, struct file *file,
 }
 
 
-static void ti_set_termios(struct usb_serial_port *port,
-	struct ktermios *old_termios)
+static void ti_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	struct ti_uart_config *config;
 	tcflag_t cflag,iflag;
 	int baud;
@@ -1008,8 +1003,9 @@ static void ti_set_termios(struct usb_serial_port *port,
 }
 
 
-static int ti_tiocmget(struct usb_serial_port *port, struct file *file)
+static int ti_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	unsigned int result;
 	unsigned int msr;
@@ -1040,9 +1036,10 @@ static int ti_tiocmget(struct usb_serial_port *port, struct file *file)
 }
 
 
-static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
+static int ti_tiocmset(struct tty_struct *tty, struct file *file,
 	unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	unsigned int mcr;
 	unsigned long flags;
@@ -1074,8 +1071,9 @@ static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
 }
 
 
-static void ti_break(struct usb_serial_port *port, int break_state)
+static void ti_break(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int status;
 
@@ -1213,14 +1211,14 @@ static void ti_bulk_in_callback(struct urb *urb)
 		return;
 	}
 
-	if (port->tty && urb->actual_length) {
+	if (port->port.tty && urb->actual_length) {
 		usb_serial_debug_data(debug, dev, __func__,
 			urb->actual_length, urb->transfer_buffer);
 
 		if (!tport->tp_is_open)
 			dbg("%s - port closed, dropping data", __func__);
 		else
-			ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer,
+			ti_recv(&urb->dev->dev, port->port.tty, urb->transfer_buffer,
 				urb->actual_length);
 
 		spin_lock(&tport->tp_lock);
@@ -1302,7 +1300,7 @@ static void ti_send(struct ti_port *tport)
 {
 	int count, result;
 	struct usb_serial_port *port = tport->tp_port;
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;	/* FIXME */
 	unsigned long flags;
 
 
@@ -1442,8 +1440,9 @@ static int ti_set_serial_info(struct ti_port *tport,
 		return -EFAULT;
 
 	tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
-	if (port->tty)
-		port->tty->low_latency =
+	/* FIXME */
+	if (port->port.tty)
+		port->port.tty->low_latency =
 			(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 	tport->tp_closing_wait = new_serial.closing_wait;
 
@@ -1477,7 +1476,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 	tport->tp_msr = msr & TI_MSR_MASK;
 
 	/* handle CTS flow control */
-	tty = tport->tp_port->tty;
+	tty = tport->tp_port->port.tty;
 	if (tty && C_CRTSCTS(tty)) {
 		if (msr & TI_MSR_CTS) {
 			tty->hw_stopped = 0;
@@ -1655,65 +1654,65 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 	return status;
 }
 
-
-static int ti_download_firmware(struct ti_device *tdev,
-				char *fw_name)
+static int ti_do_download(struct usb_device *dev, int pipe,
+						u8 *buffer, int size)
 {
-	const struct firmware *fw;
-	int status = 0;
-	int buffer_size;
 	int pos;
-	int len;
+	u8 cs = 0;
 	int done;
-	__u8 cs = 0;
-	__u8 *buffer;
-	struct usb_device *dev = tdev->td_serial->dev;
 	struct ti_firmware_header *header;
-	unsigned int pipe = usb_sndbulkpipe(dev,
-		tdev->td_serial->port[0]->bulk_out_endpointAddress);
-
-	buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
-
-	if (request_firmware(&fw, fw_name, &dev->dev)) {
-		dev_err(&dev->dev, "%s - failed to load firmware \"%s\"\n",
-			__func__, fw_name);
-		return -ENOENT;
-	}
-	if (fw->size > buffer_size) {
-		dev_err(&dev->dev, "%s - firmware \"%s\" is too large\n",
-			__func__, fw_name);
-		release_firmware(fw);
-		return -EINVAL;
-	}
-
-	buffer = kmalloc(buffer_size, GFP_KERNEL);
-	if (!buffer) {
-		dev_err(&dev->dev, "%s - out of memory\n", __func__);
-		release_firmware(fw);
-		return -ENOMEM;
-	}
-
-	memcpy(buffer, fw->data, fw->size);
-	memset(buffer+fw->size, 0xff, buffer_size-fw->size);
-
-	for(pos = sizeof(struct ti_firmware_header); pos < buffer_size; pos++)
+	int status;
+	int len;
+	
+	for(pos = sizeof(struct ti_firmware_header); pos < size; pos++)
 		cs = (__u8)(cs + buffer[pos]);
 
 	header = (struct ti_firmware_header *)buffer;
-	header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header)));
+	header->wLength = cpu_to_le16((__u16)(size 
+					- sizeof(struct ti_firmware_header)));
 	header->bCheckSum = cs;
 
 	dbg("%s - downloading firmware", __func__);
-	for (pos = 0; pos < buffer_size; pos += done) {
-		len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
-		status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000);
+	for (pos = 0; pos < size; pos += done) {
+		len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
+		status = usb_bulk_msg(dev, pipe, buffer + pos, len,
+								&done, 1000);
 		if (status)
 			break;
 	}
+	return status;
+}
 
-	kfree(buffer);
-	release_firmware(fw);
+static int ti_download_firmware(struct ti_device *tdev, int type)
+{
+	int status = -ENOMEM;
+	int buffer_size;
+	__u8 *buffer;
+	struct usb_device *dev = tdev->td_serial->dev;
+	unsigned int pipe = usb_sndbulkpipe(dev,
+		tdev->td_serial->port[0]->bulk_out_endpointAddress);
+	const struct firmware *fw_p;
+	char buf[32];
+	sprintf(buf, "ti_usb-%d.bin", type);
 
+	if (request_firmware(&fw_p, buf, &dev->dev)) {
+		dev_err(&dev->dev, "%s - firmware not found\n", __func__);
+		return -ENOENT;
+	}
+	if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
+		dev_err(&dev->dev, "%s - firmware too large\n", __func__);
+		return -ENOENT;
+	}
+
+	buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
+	buffer = kmalloc(buffer_size, GFP_KERNEL);
+	if (buffer) {
+		memcpy(buffer, fw_p->data, fw_p->size);
+		memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
+		ti_do_download(dev, pipe, buffer, fw_p->size);
+		kfree(buffer);
+	}
+	release_firmware(fw_p);
 	if (status) {
 		dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __func__, status);
 		return status;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 35379863190..ffaed8ace06 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -143,7 +143,7 @@ static void destroy_serial(struct kref *kref)
 	return_serial(serial);
 
 	for (i = 0; i < serial->num_ports; ++i)
-		serial->port[i]->open_count = 0;
+		serial->port[i]->port.count = 0;
 
 	/* the ports are cleaned up and released in port_release() */
 	for (i = 0; i < serial->num_ports; ++i)
@@ -208,14 +208,14 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 		goto bailout_kref_put;
 	}
 	 
-	++port->open_count;
+	++port->port.count;
 
 	/* set up our port structure making the tty driver
 	 * remember our port object, and us it */
 	tty->driver_data = port;
-	port->tty = tty;
+	port->port.tty = tty;
 
-	if (port->open_count == 1) {
+	if (port->port.count == 1) {
 
 		/* lock this module before we call it
 		 * this may fail, which means we must bail out,
@@ -230,7 +230,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 			goto bailout_module_put;
 		/* only call the device specific open if this 
 		 * is the first time the port is opened */
-		retval = serial->type->open(port, filp);
+		retval = serial->type->open(tty, port, filp);
 		if (retval)
 			goto bailout_interface_put;
 	}
@@ -243,9 +243,9 @@ bailout_interface_put:
 bailout_module_put:
 	module_put(serial->type->driver.owner);
 bailout_mutex_unlock:
-	port->open_count = 0;
+	port->port.count = 0;
 	tty->driver_data = NULL;
-	port->tty = NULL;
+	port->port.tty = NULL;
 	mutex_unlock(&port->mutex);
 bailout_kref_put:
 	usb_serial_put(serial);
@@ -263,26 +263,26 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 
 	mutex_lock(&port->mutex);
 
-	if (port->open_count == 0) {
+	if (port->port.count == 0) {
 		mutex_unlock(&port->mutex);
 		return;
 	}
 
-	--port->open_count;
-	if (port->open_count == 0)
+	--port->port.count;
+	if (port->port.count == 0)
 		/* only call the device specific close if this 
 		 * port is being closed by the last owner */
-		port->serial->type->close(port, filp);
+		port->serial->type->close(tty, port, filp);
 
-	if (port->open_count == (port->console? 1 : 0)) {
-		if (port->tty) {
-			if (port->tty->driver_data)
-				port->tty->driver_data = NULL;
-			port->tty = NULL;
+	if (port->port.count == (port->console? 1 : 0)) {
+		if (port->port.tty) {
+			if (port->port.tty->driver_data)
+				port->port.tty->driver_data = NULL;
+			port->port.tty = NULL;
 		}
 	}
 
-	if (port->open_count == 0) {
+	if (port->port.count == 0) {
 		mutex_lock(&port->serial->disc_mutex);
 		if (!port->serial->disconnected)
 			usb_autopm_put_interface(port->serial->interface);
@@ -304,12 +304,12 @@ static int serial_write (struct tty_struct * tty, const unsigned char *buf, int
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	/* open_count is managed under the mutex lock for the tty so cannot
+	/* count is managed under the mutex lock for the tty so cannot
            drop to zero until after the last close completes */
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 
 	/* pass on to the driver specific version of this function */
-	retval = port->serial->type->write(port, buf, count);
+	retval = port->serial->type->write(tty, port, buf, count);
 
 exit:
 	return retval;
@@ -319,9 +319,9 @@ static int serial_write_room (struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
-	return port->serial->type->write_room(port);
+	return port->serial->type->write_room(tty);
 }
 
 static int serial_chars_in_buffer (struct tty_struct *tty) 
@@ -329,9 +329,9 @@ static int serial_chars_in_buffer (struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s = port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
-	return port->serial->type->chars_in_buffer(port);
+	return port->serial->type->chars_in_buffer(tty);
 }
 
 static void serial_throttle (struct tty_struct * tty)
@@ -339,10 +339,10 @@ static void serial_throttle (struct tty_struct * tty)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	if (port->serial->type->throttle)
-		port->serial->type->throttle(port);
+		port->serial->type->throttle(tty);
 }
 
 static void serial_unthrottle (struct tty_struct * tty)
@@ -350,10 +350,10 @@ static void serial_unthrottle (struct tty_struct * tty)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	if (port->serial->type->unthrottle)
-		port->serial->type->unthrottle(port);
+		port->serial->type->unthrottle(tty);
 }
 
 static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
@@ -363,12 +363,12 @@ static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned in
 
 	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 
 	/* pass on to the driver specific version of this function if it is available */
 	if (port->serial->type->ioctl) {
 		lock_kernel();
-		retval = port->serial->type->ioctl(port, file, cmd, arg);
+		retval = port->serial->type->ioctl(tty, file, cmd, arg);
 		unlock_kernel();
 	}
 	else
@@ -381,10 +381,10 @@ static void serial_set_termios (struct tty_struct *tty, struct ktermios * old)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function if it is available */
 	if (port->serial->type->set_termios)
-		port->serial->type->set_termios(port, old);
+		port->serial->type->set_termios(tty, port, old);
 	else
 		tty_termios_copy_hw(tty->termios, old);
 }
@@ -395,11 +395,11 @@ static void serial_break (struct tty_struct *tty, int break_state)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function if it is available */
 	if (port->serial->type->break_ctl) {
 		lock_kernel();
-		port->serial->type->break_ctl(port, break_state);
+		port->serial->type->break_ctl(tty, break_state);
 		unlock_kernel();
 	}
 }
@@ -457,9 +457,9 @@ static int serial_tiocmget (struct tty_struct *tty, struct file *file)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	if (port->serial->type->tiocmget)
-		return port->serial->type->tiocmget(port, file);
+		return port->serial->type->tiocmget(tty, file);
 	return -EINVAL;
 }
 
@@ -470,9 +470,9 @@ static int serial_tiocmset (struct tty_struct *tty, struct file *file,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	if (port->serial->type->tiocmset)
-		return port->serial->type->tiocmset(port, file, set, clear);
+		return port->serial->type->tiocmset(tty, file, set, clear);
 	return -EINVAL;
 }
 
@@ -497,7 +497,7 @@ static void usb_serial_port_work(struct work_struct *work)
 	if (!port)
 		return;
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty)
 		return;
 
@@ -1010,8 +1010,8 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port) {
-			if (port->tty)
-				tty_hangup(port->tty);
+			if (port->port.tty)
+				tty_hangup(port->port.tty);
 			kill_traffic(port);
 		}
 	}
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 9ca4d4db1dd..fc5d9952b03 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -31,10 +31,11 @@ static struct usb_driver debug_driver = {
 	.no_dynamic_id = 	1,
 };
 
-int usb_debug_open(struct usb_serial_port *port, struct file *filp)
+int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *filp)
 {
 	port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE;
-	return usb_serial_generic_open(port, filp);
+	return usb_serial_generic_open(tty, port, filp);
 }
 
 static struct usb_serial_driver debug_device = {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 5fc20122145..373a3c7ea77 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -35,17 +35,15 @@
 #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
 
 /* function prototypes for a handspring visor */
-static int  visor_open		(struct usb_serial_port *port, struct file *filp);
-static void visor_close		(struct usb_serial_port *port, struct file *filp);
-static int  visor_write		(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  visor_write_room		(struct usb_serial_port *port);
-static int  visor_chars_in_buffer	(struct usb_serial_port *port);
-static void visor_throttle	(struct usb_serial_port *port);
-static void visor_unthrottle	(struct usb_serial_port *port);
+static int  visor_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void visor_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  visor_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  visor_write_room	(struct tty_struct *tty);
+static void visor_throttle	(struct tty_struct *tty);
+static void visor_unthrottle	(struct tty_struct *tty);
 static int  visor_probe		(struct usb_serial *serial, const struct usb_device_id *id);
 static int  visor_calc_num_ports(struct usb_serial *serial);
 static void visor_shutdown	(struct usb_serial *serial);
-static int  visor_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 static void visor_write_bulk_callback	(struct urb *urb);
 static void visor_read_bulk_callback	(struct urb *urb);
 static void visor_read_int_callback	(struct urb *urb);
@@ -198,10 +196,8 @@ static struct usb_serial_driver handspring_device = {
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
 	.shutdown =		visor_shutdown,
-	.ioctl =		visor_ioctl,
 	.write =		visor_write,
 	.write_room =		visor_write_room,
-	.chars_in_buffer =	visor_chars_in_buffer,
 	.write_bulk_callback =	visor_write_bulk_callback,
 	.read_bulk_callback =	visor_read_bulk_callback,
 	.read_int_callback =	visor_read_int_callback,
@@ -225,10 +221,8 @@ static struct usb_serial_driver clie_5_device = {
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
 	.shutdown =		visor_shutdown,
-	.ioctl =		visor_ioctl,
 	.write =		visor_write,
 	.write_room =		visor_write_room,
-	.chars_in_buffer =	visor_chars_in_buffer,
 	.write_bulk_callback =	visor_write_bulk_callback,
 	.read_bulk_callback =	visor_read_bulk_callback,
 	.read_int_callback =	visor_read_int_callback,
@@ -249,10 +243,8 @@ static struct usb_serial_driver clie_3_5_device = {
 	.throttle =		visor_throttle,
 	.unthrottle =		visor_unthrottle,
 	.attach =		clie_3_5_startup,
-	.ioctl =		visor_ioctl,
 	.write =		visor_write,
 	.write_room =		visor_write_room,
-	.chars_in_buffer =	visor_chars_in_buffer,
 	.write_bulk_callback =	visor_write_bulk_callback,
 	.read_bulk_callback =	visor_read_bulk_callback,
 };
@@ -274,7 +266,7 @@ static int stats;
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
-static int visor_open (struct usb_serial_port *port, struct file *filp)
+static int visor_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	struct visor_private *priv = usb_get_serial_port_data(port);
@@ -300,8 +292,8 @@ static int visor_open (struct usb_serial_port *port, struct file *filp)
 	 * through, otherwise it is scheduled, and with high data rates (like
 	 * with OHCI) data can get lost.
 	 */
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* Start reading from the device */
 	usb_fill_bulk_urb (port->read_urb, serial->dev,
@@ -329,7 +321,8 @@ exit:
 }
 
 
-static void visor_close (struct usb_serial_port *port, struct file * filp)
+static void visor_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
@@ -361,7 +354,8 @@ static void visor_close (struct usb_serial_port *port, struct file * filp)
 }
 
 
-static int visor_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
@@ -435,8 +429,9 @@ error_no_buffer:
 }
 
 
-static int visor_write_room (struct usb_serial_port *port)
+static int visor_write_room (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -460,22 +455,6 @@ static int visor_write_room (struct usb_serial_port *port)
 }
 
 
-static int visor_chars_in_buffer (struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-
-	/* 
-	 * We can't really account for how much data we
-	 * have sent out, but hasn't made it through to the
-	 * device, so just tell the tty layer that everything
-	 * is flushed.
-	 *
-	 * FIXME: Should walk outstanding_urbs
-	 */
-	return 0;
-}
-
-
 static void visor_write_bulk_callback (struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
@@ -520,7 +499,7 @@ static void visor_read_bulk_callback (struct urb *urb)
 
 	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		available_room = tty_buffer_request_room(tty, urb->actual_length);
 		if (available_room) {
@@ -591,8 +570,9 @@ exit:
 			__func__, result);
 }
 
-static void visor_throttle (struct usb_serial_port *port)
+static void visor_throttle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -603,8 +583,9 @@ static void visor_throttle (struct usb_serial_port *port)
 }
 
 
-static void visor_unthrottle (struct usb_serial_port *port)
+static void visor_unthrottle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	int result;
@@ -922,13 +903,6 @@ static void visor_shutdown (struct usb_serial *serial)
 	}
 }
 
-static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
-{
-	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
-
-	return -ENOIOCTLCMD;
-}
-
 static int __init visor_init (void)
 {
 	int i, retval;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 665aa77a917..b07d6a5cac3 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -142,18 +142,18 @@ static int  whiteheat_firmware_attach	(struct usb_serial *serial);
 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
 static int  whiteheat_attach		(struct usb_serial *serial);
 static void whiteheat_shutdown		(struct usb_serial *serial);
-static int  whiteheat_open		(struct usb_serial_port *port, struct file *filp);
-static void whiteheat_close		(struct usb_serial_port *port, struct file *filp);
-static int  whiteheat_write		(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  whiteheat_write_room	(struct usb_serial_port *port);
-static int  whiteheat_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void whiteheat_set_termios	(struct usb_serial_port *port, struct ktermios * old);
-static int  whiteheat_tiocmget		(struct usb_serial_port *port, struct file *file);
-static int  whiteheat_tiocmset		(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
-static void whiteheat_break_ctl		(struct usb_serial_port *port, int break_state);
-static int  whiteheat_chars_in_buffer	(struct usb_serial_port *port);
-static void whiteheat_throttle		(struct usb_serial_port *port);
-static void whiteheat_unthrottle	(struct usb_serial_port *port);
+static int  whiteheat_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void whiteheat_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  whiteheat_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  whiteheat_write_room	(struct tty_struct *tty);
+static int  whiteheat_ioctl		(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
+static void whiteheat_set_termios	(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
+static int  whiteheat_tiocmget		(struct tty_struct *tty, struct file *file);
+static int  whiteheat_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
+static void whiteheat_break_ctl		(struct tty_struct *tty, int break_state);
+static int  whiteheat_chars_in_buffer	(struct tty_struct *tty);
+static void whiteheat_throttle		(struct tty_struct *tty);
+static void whiteheat_unthrottle	(struct tty_struct *tty);
 static void whiteheat_read_callback	(struct urb *urb);
 static void whiteheat_write_callback	(struct urb *urb);
 
@@ -246,7 +246,7 @@ static void rx_data_softint(struct work_struct *work);
 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
 static int firm_open(struct usb_serial_port *port);
 static int firm_close(struct usb_serial_port *port);
-static int firm_setup_port(struct usb_serial_port *port);
+static int firm_setup_port(struct tty_struct *tty);
 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
@@ -613,7 +613,8 @@ static void whiteheat_shutdown (struct usb_serial *serial)
 }
 
 
-static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
+static int whiteheat_open (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int		retval = 0;
 	struct ktermios	old_term;
@@ -624,7 +625,8 @@ static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
 	if (retval)
 		goto exit;
 
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* send an open port command */
 	retval = firm_open(port);
@@ -640,9 +642,11 @@ static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
 		goto exit;
 	}
 
-	old_term.c_cflag = ~port->tty->termios->c_cflag;
-	old_term.c_iflag = ~port->tty->termios->c_iflag;
-	whiteheat_set_termios(port, &old_term);
+	if (tty) {
+		old_term.c_cflag = ~tty->termios->c_cflag;
+		old_term.c_iflag = ~tty->termios->c_iflag;
+		whiteheat_set_termios(tty, port, &old_term);
+	}
 
 	/* Work around HCD bugs */
 	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
@@ -663,7 +667,8 @@ exit:
 }
 
 
-static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
+static void whiteheat_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct whiteheat_urb_wrap *wrap;
@@ -681,7 +686,7 @@ static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
 	}
 	mutex_unlock(&port->serial->disc_mutex);
 
-	port->tty->closing = 1;
+	tty->closing = 1;
 
 /*
  * Not currently in use; tty_wait_until_sent() calls
@@ -689,12 +694,12 @@ static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
  * acquisition. This should be fixed at some point. Greg's been
  * notified.
 	if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
-		tty_wait_until_sent(port->tty, CLOSING_DELAY);
+		tty_wait_until_sent(tty, CLOSING_DELAY);
 	}
 */
 
-	tty_driver_flush_buffer(port->tty);
-	tty_ldisc_flush(port->tty);
+	tty_driver_flush_buffer(tty);
+	tty_ldisc_flush(tty);
 
 	firm_report_tx_done(port);
 
@@ -728,11 +733,12 @@ static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
 
 	stop_command_port(port->serial);
 
-	port->tty->closing = 0;
+	tty->closing = 0;
 }
 
 
-static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+static int whiteheat_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
@@ -791,8 +797,9 @@ static int whiteheat_write(struct usb_serial_port *port, const unsigned char *bu
 }
 
 
-static int whiteheat_write_room(struct usb_serial_port *port)
+static int whiteheat_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct list_head *tmp;
 	int room = 0;
@@ -811,8 +818,9 @@ static int whiteheat_write_room(struct usb_serial_port *port)
 }
 
 
-static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file)
+static int whiteheat_tiocmget (struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	unsigned int modem_signals = 0;
 
@@ -828,9 +836,10 @@ static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file)
 }
 
 
-static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file,
+static int whiteheat_tiocmset (struct tty_struct *tty, struct file *file,
 			       unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 
 	dbg("%s - port %d", __func__, port->number);
@@ -851,8 +860,9 @@ static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file,
 }
 
 
-static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+static int whiteheat_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct serial_struct serstruct;
 	void __user *user_arg = (void __user *)arg;
 
@@ -896,20 +906,21 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, un
 }
 
 
-static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
+static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	dbg("%s -port %d", __func__, port->number);
-	firm_setup_port(port);
+	firm_setup_port(tty);
 }
 
 
-static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) {
+static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) {
+	struct usb_serial_port *port = tty->driver_data;
 	firm_set_break(port, break_state);
 }
 
 
-static int whiteheat_chars_in_buffer(struct usb_serial_port *port)
+static int whiteheat_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct list_head *tmp;
 	struct whiteheat_urb_wrap *wrap;
@@ -930,8 +941,9 @@ static int whiteheat_chars_in_buffer(struct usb_serial_port *port)
 }
 
 
-static void whiteheat_throttle (struct usb_serial_port *port)
+static void whiteheat_throttle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -945,8 +957,9 @@ static void whiteheat_throttle (struct usb_serial_port *port)
 }
 
 
-static void whiteheat_unthrottle (struct usb_serial_port *port)
+static void whiteheat_unthrottle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	int actually_throttled;
 	unsigned long flags;
@@ -1184,9 +1197,10 @@ static int firm_close(struct usb_serial_port *port) {
 }
 
 
-static int firm_setup_port(struct usb_serial_port *port) {
+static int firm_setup_port(struct tty_struct *tty) {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_port_settings port_settings;
-	unsigned int cflag = port->tty->termios->c_cflag;
+	unsigned int cflag = tty->termios->c_cflag;
 
 	port_settings.port = port->number + 1;
 
@@ -1235,22 +1249,22 @@ static int firm_setup_port(struct usb_serial_port *port) {
 	    (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
 	
 	/* determine software flow control */
-	if (I_IXOFF(port->tty))
+	if (I_IXOFF(tty))
 		port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
 	else
 		port_settings.sflow = WHITEHEAT_SFLOW_NONE;
 	dbg("%s - software flow control = %c", __func__, port_settings.sflow);
 	
-	port_settings.xon = START_CHAR(port->tty);
-	port_settings.xoff = STOP_CHAR(port->tty);
+	port_settings.xon = START_CHAR(tty);
+	port_settings.xoff = STOP_CHAR(tty);
 	dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff);
 
 	/* get the baud rate wanted */
-	port_settings.baud = tty_get_baud_rate(port->tty);
+	port_settings.baud = tty_get_baud_rate(tty);
 	dbg("%s - baud rate = %d", __func__, port_settings.baud);
 
 	/* fixme: should set validated settings */
-	tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud);
+	tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
 	/* handle any settings that aren't specified in the tty structure */
 	port_settings.lloop = 0;
 	
@@ -1426,7 +1440,7 @@ static void rx_data_softint(struct work_struct *work)
 	struct whiteheat_private *info =
 		container_of(work, struct whiteheat_private, rx_work);
 	struct usb_serial_port *port = info->port;
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;
 	struct whiteheat_urb_wrap *wrap;
 	struct urb *urb;
 	unsigned long flags;
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 8f891cbaf9a..09a3e6a7518 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -62,7 +62,7 @@
  */
 struct usb_serial_port {
 	struct usb_serial	*serial;
-	struct tty_struct	*tty;
+	struct tty_port		port;
 	spinlock_t		lock;
 	struct mutex            mutex;
 	unsigned char		number;
@@ -89,7 +89,6 @@ struct usb_serial_port {
 
 	wait_queue_head_t	write_wait;
 	struct work_struct	work;
-	int			open_count;
 	char			throttled;
 	char			throttle_req;
 	char			console;
@@ -217,22 +216,27 @@ struct usb_serial_driver {
 	int (*resume)(struct usb_serial *serial);
 
 	/* serial function calls */
-	int  (*open)(struct usb_serial_port *port, struct file *filp);
-	void (*close)(struct usb_serial_port *port, struct file *filp);
-	int  (*write)(struct usb_serial_port *port, const unsigned char *buf,
-		      int count);
-	int  (*write_room)(struct usb_serial_port *port);
-	int  (*ioctl)(struct usb_serial_port *port, struct file *file,
+	/* Called by console with tty = NULL and by tty */
+	int  (*open)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+	void (*close)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+	/* Called only by the tty layer */
+	int  (*write_room)(struct tty_struct *tty);
+	int  (*ioctl)(struct tty_struct *tty, struct file *file,
 		      unsigned int cmd, unsigned long arg);
-	void (*set_termios)(struct usb_serial_port *port, struct ktermios *old);
-	void (*break_ctl)(struct usb_serial_port *port, int break_state);
-	int  (*chars_in_buffer)(struct usb_serial_port *port);
-	void (*throttle)(struct usb_serial_port *port);
-	void (*unthrottle)(struct usb_serial_port *port);
-	int  (*tiocmget)(struct usb_serial_port *port, struct file *file);
-	int  (*tiocmset)(struct usb_serial_port *port, struct file *file,
+	void (*set_termios)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+	void (*break_ctl)(struct tty_struct *tty, int break_state);
+	int  (*chars_in_buffer)(struct tty_struct *tty);
+	void (*throttle)(struct tty_struct *tty);
+	void (*unthrottle)(struct tty_struct *tty);
+	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
+	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
-
+	/* USB events */
 	void (*read_int_callback)(struct urb *urb);
 	void (*write_int_callback)(struct urb *urb);
 	void (*read_bulk_callback)(struct urb *urb);
@@ -270,19 +274,19 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
 /* Functions needed by other parts of the usbserial core */
 extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
 extern void usb_serial_put(struct usb_serial *serial);
-extern int usb_serial_generic_open(struct usb_serial_port *port,
-				   struct file *filp);
-extern int usb_serial_generic_write(struct usb_serial_port *port,
-				    const unsigned char *buf, int count);
-extern void usb_serial_generic_close(struct usb_serial_port *port,
-				     struct file *filp);
+extern int usb_serial_generic_open(struct tty_struct *tty,
+		struct usb_serial_port *port, struct file *filp);
+extern int usb_serial_generic_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count);
+extern void usb_serial_generic_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
 extern int usb_serial_generic_resume(struct usb_serial *serial);
-extern int usb_serial_generic_write_room(struct usb_serial_port *port);
-extern int usb_serial_generic_chars_in_buffer(struct usb_serial_port *port);
+extern int usb_serial_generic_write_room(struct tty_struct *tty);
+extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
 extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
 extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
-extern void usb_serial_generic_throttle(struct usb_serial_port *port);
-extern void usb_serial_generic_unthrottle(struct usb_serial_port *port);
+extern void usb_serial_generic_throttle(struct tty_struct *tty);
+extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
 extern void usb_serial_generic_shutdown(struct usb_serial *serial);
 extern int usb_serial_generic_register(int debug);
 extern void usb_serial_generic_deregister(void);
-- 
cgit v1.2.3


From 80359a9c5c03d585686e2596c9ee46703eb03047 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:09:16 +0100
Subject: whiteheat: coding style

Bring ezusb and whiteheat into line with the coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ezusb.c     |  22 +--
 drivers/usb/serial/whiteheat.c | 386 +++++++++++++++++++++++------------------
 drivers/usb/serial/whiteheat.h |  78 ++++++---
 3 files changed, 280 insertions(+), 206 deletions(-)

diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index cc4fbd9d60b..711e84f6ed8 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -20,7 +20,8 @@
 /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
 #define CPUCS_REG    0x7F92
 
-int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest)
+int ezusb_writememory(struct usb_serial *serial, int address,
+				unsigned char *data, int length, __u8 request)
 {
 	int result;
 	unsigned char *transfer_buffer;
@@ -33,26 +34,27 @@ int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *da
 
 	transfer_buffer = kmemdup(data, length, GFP_KERNEL);
 	if (!transfer_buffer) {
-		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, length);
+		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
+							__func__, length);
 		return -ENOMEM;
 	}
-	result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000);
-	kfree (transfer_buffer);
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+		     request, 0x40, address, 0, transfer_buffer, length, 3000);
+	kfree(transfer_buffer);
 	return result;
 }
+EXPORT_SYMBOL_GPL(ezusb_writememory);
 
-int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit)
+int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit)
 {
 	int response;
 
 	/* dbg("%s - %d", __func__, reset_bit); */
-	response = ezusb_writememory (serial, CPUCS_REG, &reset_bit, 1, 0xa0);
+	response = ezusb_writememory(serial, CPUCS_REG, &reset_bit, 1, 0xa0);
 	if (response < 0)
-		dev_err(&serial->dev->dev, "%s- %d failed\n", __func__, reset_bit);
+		dev_err(&serial->dev->dev, "%s- %d failed\n",
+						__func__, reset_bit);
 	return response;
 }
-
-
-EXPORT_SYMBOL_GPL(ezusb_writememory);
 EXPORT_SYMBOL_GPL(ezusb_set_reset);
 
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index b07d6a5cac3..2569b68b833 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -12,29 +12,31 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
  *	Upgrade to full working driver
  *
  * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of problems.
+ *	switched from using spinlock to a semaphore, which fixes lots of
+ *	problems.
  *
  * (04/08/2001) gb
  *	Identify version on module load.
- * 
+ *
  * 2001_Mar_19 gkh
- *	Fixed MOD_INC and MOD_DEC logic, the ability to open a port more 
+ *	Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
  *	than once, and the got the proper usb_device_id table entries so
  *	the driver works again.
  *
  * (11/01/2000) Adam J. Richter
  *	usb_device_id table support
- * 
+ *
  * (10/05/2000) gkh
  *	Fixed bug with urb->dev not being set properly, now that the usb
  *	core needs it.
- * 
+ *
  * (10/03/2000) smd
  *	firmware is improved to guard against crap sent to device
  *	firmware now replies CMD_FAILURE on bad things
@@ -52,9 +54,9 @@
  *	Fixed bug with port->minor that was found by Al Borchers
  *
  * (07/04/2000) gkh
- *	Added support for port settings. Baud rate can now be changed. Line signals
- *	are not transferred to and from the tty layer yet, but things seem to be 
- *	working well now.
+ *	Added support for port settings. Baud rate can now be changed. Line
+ *	signals are not transferred to and from the tty layer yet, but things
+ *	seem to be working well now.
  *
  * (05/04/2000) gkh
  *	First cut at open and close commands. Data can flow through the ports at
@@ -62,7 +64,7 @@
  *
  * (03/26/2000) gkh
  *	Split driver up into device specific pieces.
- * 
+ *
  */
 
 #include <linux/kernel.h>
@@ -75,7 +77,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/termbits.h>
 #include <linux/usb.h>
 #include <linux/serial_reg.h>
@@ -125,7 +127,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ }						/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver whiteheat_driver = {
 	.name =		"whiteheat",
@@ -136,26 +138,34 @@ static struct usb_driver whiteheat_driver = {
 };
 
 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
-static int  whiteheat_firmware_download	(struct usb_serial *serial, const struct usb_device_id *id);
-static int  whiteheat_firmware_attach	(struct usb_serial *serial);
+static int  whiteheat_firmware_download(struct usb_serial *serial,
+					const struct usb_device_id *id);
+static int  whiteheat_firmware_attach(struct usb_serial *serial);
 
 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
-static int  whiteheat_attach		(struct usb_serial *serial);
-static void whiteheat_shutdown		(struct usb_serial *serial);
-static int  whiteheat_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void whiteheat_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int  whiteheat_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  whiteheat_write_room	(struct tty_struct *tty);
-static int  whiteheat_ioctl		(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-static void whiteheat_set_termios	(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
-static int  whiteheat_tiocmget		(struct tty_struct *tty, struct file *file);
-static int  whiteheat_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
-static void whiteheat_break_ctl		(struct tty_struct *tty, int break_state);
-static int  whiteheat_chars_in_buffer	(struct tty_struct *tty);
-static void whiteheat_throttle		(struct tty_struct *tty);
-static void whiteheat_unthrottle	(struct tty_struct *tty);
-static void whiteheat_read_callback	(struct urb *urb);
-static void whiteheat_write_callback	(struct urb *urb);
+static int  whiteheat_attach(struct usb_serial *serial);
+static void whiteheat_shutdown(struct usb_serial *serial);
+static int  whiteheat_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void whiteheat_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static int  whiteheat_write(struct tty_struct *tty,
+			struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+static int  whiteheat_write_room(struct tty_struct *tty);
+static int  whiteheat_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg);
+static void whiteheat_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static int  whiteheat_tiocmget(struct tty_struct *tty, struct file *file);
+static int  whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
+			unsigned int set, unsigned int clear);
+static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
+static int  whiteheat_chars_in_buffer(struct tty_struct *tty);
+static void whiteheat_throttle(struct tty_struct *tty);
+static void whiteheat_unthrottle(struct tty_struct *tty);
+static void whiteheat_read_callback(struct urb *urb);
+static void whiteheat_write_callback(struct urb *urb);
 
 static struct usb_serial_driver whiteheat_fake_device = {
 	.driver = {
@@ -202,7 +212,9 @@ struct whiteheat_command_private {
 	struct mutex		mutex;
 	__u8			port_running;
 	__u8			command_finished;
-	wait_queue_head_t	wait_command;	/* for handling sleeping while waiting for a command to finish */
+	wait_queue_head_t	wait_command; /* for handling sleeping whilst
+						 waiting for a command to
+						 finish */
 	__u8			result_buffer[64];
 };
 
@@ -239,11 +251,13 @@ static void command_port_write_callback(struct urb *urb);
 static void command_port_read_callback(struct urb *urb);
 
 static int start_port_read(struct usb_serial_port *port);
-static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head);
+static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
+						struct list_head *head);
 static struct list_head *list_first(struct list_head *head);
 static void rx_data_softint(struct work_struct *work);
 
-static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
+static int firm_send_command(struct usb_serial_port *port, __u8 command,
+						__u8 *data, __u8 datasize);
 static int firm_open(struct usb_serial_port *port);
 static int firm_close(struct usb_serial_port *port);
 static int firm_setup_port(struct tty_struct *tty);
@@ -278,7 +292,8 @@ static int firm_report_tx_done(struct usb_serial_port *port);
  - device renumerated itself and comes up as new device id with all
    firmware download completed.
 */
-static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id)
+static int whiteheat_firmware_download(struct usb_serial *serial,
+					const struct usb_device_id *id)
 {
 	int response, ret = -ENOENT;
 	const struct firmware *loader_fw = NULL, *firmware_fw = NULL;
@@ -313,7 +328,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct
 		record = ihex_next_binrec(record);
 	}
 
-	response = ezusb_set_reset (serial, 0);
+	response = ezusb_set_reset(serial, 0);
 
 	record = (const struct ihex_binrec *)firmware_fw->data;
 	while (record && be32_to_cpu(record->addr) < 0x1b40)
@@ -330,8 +345,8 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct
 		}
 		++record;
 	}
-	
-	response = ezusb_set_reset (serial, 1);
+
+	response = ezusb_set_reset(serial, 1);
 
 	record = (const struct ihex_binrec *)firmware_fw->data;
 	while (record && be32_to_cpu(record->addr) < 0x1b40) {
@@ -355,7 +370,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct
 }
 
 
-static int whiteheat_firmware_attach (struct usb_serial *serial)
+static int whiteheat_firmware_attach(struct usb_serial *serial)
 {
 	/* We want this device to fail to have a driver assigned to it */
 	return 1;
@@ -365,7 +380,7 @@ static int whiteheat_firmware_attach (struct usb_serial *serial)
 /*****************************************************************************
  * Connect Tech's White Heat serial driver functions
  *****************************************************************************/
-static int whiteheat_attach (struct usb_serial *serial)
+static int whiteheat_attach(struct usb_serial *serial)
 {
 	struct usb_serial_port *command_port;
 	struct whiteheat_command_private *command_info;
@@ -386,43 +401,52 @@ static int whiteheat_attach (struct usb_serial *serial)
 
 	command_port = serial->port[COMMAND_PORT];
 
-	pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress);
+	pipe = usb_sndbulkpipe(serial->dev,
+			command_port->bulk_out_endpointAddress);
 	command = kmalloc(2, GFP_KERNEL);
 	if (!command)
 		goto no_command_buffer;
 	command[0] = WHITEHEAT_GET_HW_INFO;
 	command[1] = 0;
-	
+
 	result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
 	if (!result)
 		goto no_result_buffer;
 	/*
 	 * When the module is reloaded the firmware is still there and
 	 * the endpoints are still in the usb core unchanged. This is the
-         * unlinking bug in disguise. Same for the call below.
-         */
+	 * unlinking bug in disguise. Same for the call below.
+	 */
 	usb_clear_halt(serial->dev, pipe);
-	ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
+	ret = usb_bulk_msg(serial->dev, pipe, command, 2,
+						&alen, COMMAND_TIMEOUT_MS);
 	if (ret) {
-		err("%s: Couldn't send command [%d]", serial->type->description, ret);
+		err("%s: Couldn't send command [%d]",
+				serial->type->description, ret);
 		goto no_firmware;
 	} else if (alen != 2) {
-		err("%s: Send command incomplete [%d]", serial->type->description, alen);
+		err("%s: Send command incomplete [%d]",
+				serial->type->description, alen);
 		goto no_firmware;
 	}
 
-	pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress);
+	pipe = usb_rcvbulkpipe(serial->dev,
+				command_port->bulk_in_endpointAddress);
 	/* See the comment on the usb_clear_halt() above */
 	usb_clear_halt(serial->dev, pipe);
-	ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
+	ret = usb_bulk_msg(serial->dev, pipe, result,
+			sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
 	if (ret) {
-		err("%s: Couldn't get results [%d]", serial->type->description, ret);
+		err("%s: Couldn't get results [%d]",
+				serial->type->description, ret);
 		goto no_firmware;
 	} else if (alen != sizeof(*hw_info) + 1) {
-		err("%s: Get results incomplete [%d]", serial->type->description, alen);
+		err("%s: Get results incomplete [%d]",
+				serial->type->description, alen);
 		goto no_firmware;
 	} else if (result[0] != command[0]) {
-		err("%s: Command failed [%d]", serial->type->description, result[0]);
+		err("%s: Command failed [%d]",
+				serial->type->description, result[0]);
 		goto no_firmware;
 	}
 
@@ -436,7 +460,8 @@ static int whiteheat_attach (struct usb_serial *serial)
 
 		info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
 		if (info == NULL) {
-			err("%s: Out of memory for port structures\n", serial->type->description);
+			err("%s: Out of memory for port structures\n",
+					serial->type->description);
 			goto no_private;
 		}
 
@@ -506,9 +531,11 @@ static int whiteheat_attach (struct usb_serial *serial)
 		usb_set_serial_port_data(port, info);
 	}
 
-	command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
+	command_info = kmalloc(sizeof(struct whiteheat_command_private),
+								GFP_KERNEL);
 	if (command_info == NULL) {
-		err("%s: Out of memory for port structures\n", serial->type->description);
+		err("%s: Out of memory for port structures\n",
+					serial->type->description);
 		goto no_command_private;
 	}
 
@@ -525,9 +552,12 @@ static int whiteheat_attach (struct usb_serial *serial)
 
 no_firmware:
 	/* Firmware likely not running */
-	err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
-	err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
-	err("%s: please contact support@connecttech.com\n", serial->type->description);
+	err("%s: Unable to retrieve firmware version, try replugging\n",
+					serial->type->description);
+	err("%s: If the firmware is not running (status led not blinking)\n",
+					serial->type->description);
+	err("%s: please contact support@connecttech.com\n",
+					serial->type->description);
 	kfree(result);
 	return -ENODEV;
 
@@ -570,7 +600,7 @@ no_command_buffer:
 }
 
 
-static void whiteheat_shutdown (struct usb_serial *serial)
+static void whiteheat_shutdown(struct usb_serial *serial)
 {
 	struct usb_serial_port *command_port;
 	struct usb_serial_port *port;
@@ -585,7 +615,7 @@ static void whiteheat_shutdown (struct usb_serial *serial)
 
 	/* free up our private data for our command port */
 	command_port = serial->port[COMMAND_PORT];
-	kfree (usb_get_serial_port_data(command_port));
+	kfree(usb_get_serial_port_data(command_port));
 
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
@@ -612,8 +642,7 @@ static void whiteheat_shutdown (struct usb_serial *serial)
 	return;
 }
 
-
-static int whiteheat_open (struct tty_struct *tty,
+static int whiteheat_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
 	int		retval = 0;
@@ -655,7 +684,8 @@ static int whiteheat_open (struct tty_struct *tty,
 	/* Start reading from the device */
 	retval = start_port_read(port);
 	if (retval) {
-		err("%s - failed submitting read urb, error %d", __func__, retval);
+		err("%s - failed submitting read urb, error %d",
+				__func__, retval);
 		firm_close(port);
 		stop_command_port(port->serial);
 		goto exit;
@@ -668,7 +698,7 @@ exit:
 
 
 static void whiteheat_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct whiteheat_urb_wrap *wrap;
@@ -769,16 +799,19 @@ static int whiteheat_write(struct tty_struct *tty,
 
 		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 		urb = wrap->urb;
-		bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count;
-		memcpy (urb->transfer_buffer, buf + sent, bytes);
+		bytes = (count > port->bulk_out_size) ?
+					port->bulk_out_size : count;
+		memcpy(urb->transfer_buffer, buf + sent, bytes);
 
-		usb_serial_debug_data(debug, &port->dev, __func__, bytes, urb->transfer_buffer);
+		usb_serial_debug_data(debug, &port->dev,
+				__func__, bytes, urb->transfer_buffer);
 
 		urb->dev = serial->dev;
 		urb->transfer_buffer_length = bytes;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed submitting write urb, error %d", __func__, result);
+			err("%s - failed submitting write urb, error %d",
+							__func__, result);
 			sent = result;
 			spin_lock_irqsave(&info->lock, flags);
 			list_add(tmp, &info->tx_urbs_free);
@@ -796,7 +829,6 @@ static int whiteheat_write(struct tty_struct *tty,
 	return sent;
 }
 
-
 static int whiteheat_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -806,7 +838,7 @@ static int whiteheat_write_room(struct tty_struct *tty)
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
-	
+
 	spin_lock_irqsave(&info->lock, flags);
 	list_for_each(tmp, &info->tx_urbs_free)
 		room++;
@@ -817,8 +849,7 @@ static int whiteheat_write_room(struct tty_struct *tty)
 	return (room);
 }
 
-
-static int whiteheat_tiocmget (struct tty_struct *tty, struct file *file)
+static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
@@ -835,8 +866,7 @@ static int whiteheat_tiocmget (struct tty_struct *tty, struct file *file)
 	return modem_signals;
 }
 
-
-static int whiteheat_tiocmset (struct tty_struct *tty, struct file *file,
+static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
 			       unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -860,7 +890,8 @@ static int whiteheat_tiocmset (struct tty_struct *tty, struct file *file,
 }
 
 
-static int whiteheat_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int whiteheat_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct serial_struct serstruct;
@@ -869,50 +900,38 @@ static int whiteheat_ioctl (struct tty_struct *tty, struct file * file, unsigned
 	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 
 	switch (cmd) {
-		case TIOCGSERIAL:
-			memset(&serstruct, 0, sizeof(serstruct));
-			serstruct.type = PORT_16654;
-			serstruct.line = port->serial->minor;
-			serstruct.port = port->number;
-			serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
-			serstruct.xmit_fifo_size = port->bulk_out_size;
-			serstruct.custom_divisor = 0;
-			serstruct.baud_base = 460800;
-			serstruct.close_delay = CLOSING_DELAY;
-			serstruct.closing_wait = CLOSING_DELAY;
-
-			if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
-				return -EFAULT;
-
-			break;
-
-		case TIOCSSERIAL:
-			if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
-				return -EFAULT;
-
-			/*
-			 * For now this is ignored. dip sets the ASYNC_[V]HI flags
-			 * but this isn't used by us at all. Maybe someone somewhere
-			 * will need the custom_divisor setting.
-			 */
-
-			break;
-
-		default:
-			break;
+	case TIOCGSERIAL:
+		memset(&serstruct, 0, sizeof(serstruct));
+		serstruct.type = PORT_16654;
+		serstruct.line = port->serial->minor;
+		serstruct.port = port->number;
+		serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+		serstruct.xmit_fifo_size = port->bulk_out_size;
+		serstruct.custom_divisor = 0;
+		serstruct.baud_base = 460800;
+		serstruct.close_delay = CLOSING_DELAY;
+		serstruct.closing_wait = CLOSING_DELAY;
+
+		if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
+			return -EFAULT;
+		break;
+	default:
+		break;
 	}
 
 	return -ENOIOCTLCMD;
 }
 
 
-static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios)
+static void whiteheat_set_termios(struct tty_struct *tty,
+	struct usb_serial_port *port, struct ktermios *old_termios)
 {
+	/* FIXME */
 	firm_setup_port(tty);
 }
 
-
-static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) {
+static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
+{
 	struct usb_serial_port *port = tty->driver_data;
 	firm_set_break(port, break_state);
 }
@@ -936,12 +955,12 @@ static int whiteheat_chars_in_buffer(struct tty_struct *tty)
 	}
 	spin_unlock_irqrestore(&info->lock, flags);
 
-	dbg ("%s - returns %d", __func__, chars);
+	dbg("%s - returns %d", __func__, chars);
 	return chars;
 }
 
 
-static void whiteheat_throttle (struct tty_struct *tty)
+static void whiteheat_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
@@ -957,7 +976,7 @@ static void whiteheat_throttle (struct tty_struct *tty)
 }
 
 
-static void whiteheat_unthrottle (struct tty_struct *tty)
+static void whiteheat_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
@@ -1006,7 +1025,7 @@ static void command_port_read_callback(struct urb *urb)
 
 	command_info = usb_get_serial_port_data(command_port);
 	if (!command_info) {
-		dbg ("%s - command_info is NULL, exiting.", __func__);
+		dbg("%s - command_info is NULL, exiting.", __func__);
 		return;
 	}
 	if (status) {
@@ -1017,7 +1036,8 @@ static void command_port_read_callback(struct urb *urb)
 		return;
 	}
 
-	usb_serial_debug_data(debug, &command_port->dev, __func__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &command_port->dev,
+				__func__, urb->actual_length, data);
 
 	if (data[0] == WHITEHEAT_CMD_COMPLETE) {
 		command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
@@ -1026,21 +1046,23 @@ static void command_port_read_callback(struct urb *urb)
 		command_info->command_finished = WHITEHEAT_CMD_FAILURE;
 		wake_up(&command_info->wait_command);
 	} else if (data[0] == WHITEHEAT_EVENT) {
-		/* These are unsolicited reports from the firmware, hence no waiting command to wakeup */
+		/* These are unsolicited reports from the firmware, hence no
+		   waiting command to wakeup */
 		dbg("%s - event received", __func__);
 	} else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
-		memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1);
+		memcpy(command_info->result_buffer, &data[1],
+						urb->actual_length - 1);
 		command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
 		wake_up(&command_info->wait_command);
-	} else {
+	} else
 		dbg("%s - bad reply from firmware", __func__);
-	}
-	
+
 	/* Continue trying to always read */
 	command_port->read_urb->dev = command_port->serial->dev;
 	result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
 	if (result)
-		dbg("%s - failed resubmitting read urb, error %d", __func__, result);
+		dbg("%s - failed resubmitting read urb, error %d",
+			__func__, result);
 }
 
 
@@ -1073,7 +1095,8 @@ static void whiteheat_read_callback(struct urb *urb)
 		return;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev,
+				__func__, urb->actual_length, data);
 
 	spin_lock(&info->lock);
 	list_add_tail(&wrap->list, &info->rx_urb_q);
@@ -1120,7 +1143,8 @@ static void whiteheat_write_callback(struct urb *urb)
 /*****************************************************************************
  * Connect Tech's White Heat firmware interface
  *****************************************************************************/
-static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize)
+static int firm_send_command(struct usb_serial_port *port, __u8 command,
+						__u8 *data, __u8 datasize)
 {
 	struct usb_serial_port *command_port;
 	struct whiteheat_command_private *command_info;
@@ -1135,13 +1159,13 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d
 	command_info = usb_get_serial_port_data(command_port);
 	mutex_lock(&command_info->mutex);
 	command_info->command_finished = false;
-	
+
 	transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
 	transfer_buffer[0] = command;
-	memcpy (&transfer_buffer[1], data, datasize);
+	memcpy(&transfer_buffer[1], data, datasize);
 	command_port->write_urb->transfer_buffer_length = datasize + 1;
 	command_port->write_urb->dev = port->serial->dev;
-	retval = usb_submit_urb (command_port->write_urb, GFP_NOIO);
+	retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
 	if (retval) {
 		dbg("%s - submit urb failed", __func__);
 		goto exit;
@@ -1168,36 +1192,41 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d
 	if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
 		dbg("%s - command completed.", __func__);
 		switch (command) {
-			case WHITEHEAT_GET_DTR_RTS:
-				info = usb_get_serial_port_data(port);
-				memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info));
+		case WHITEHEAT_GET_DTR_RTS:
+			info = usb_get_serial_port_data(port);
+			memcpy(&info->mcr, command_info->result_buffer,
+					sizeof(struct whiteheat_dr_info));
 				break;
 		}
 	}
-
 exit:
 	mutex_unlock(&command_info->mutex);
 	return retval;
 }
 
 
-static int firm_open(struct usb_serial_port *port) {
+static int firm_open(struct usb_serial_port *port)
+{
 	struct whiteheat_simple open_command;
 
 	open_command.port = port->number - port->serial->minor + 1;
-	return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command));
+	return firm_send_command(port, WHITEHEAT_OPEN,
+		(__u8 *)&open_command, sizeof(open_command));
 }
 
 
-static int firm_close(struct usb_serial_port *port) {
+static int firm_close(struct usb_serial_port *port)
+{
 	struct whiteheat_simple close_command;
 
 	close_command.port = port->number - port->serial->minor + 1;
-	return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command));
+	return firm_send_command(port, WHITEHEAT_CLOSE,
+			(__u8 *)&close_command, sizeof(close_command));
 }
 
 
-static int firm_setup_port(struct tty_struct *tty) {
+static int firm_setup_port(struct tty_struct *tty)
+{
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_port_settings port_settings;
 	unsigned int cflag = tty->termios->c_cflag;
@@ -1206,14 +1235,14 @@ static int firm_setup_port(struct tty_struct *tty) {
 
 	/* get the byte size */
 	switch (cflag & CSIZE) {
-		case CS5:	port_settings.bits = 5;   break;
-		case CS6:	port_settings.bits = 6;   break;
-		case CS7:	port_settings.bits = 7;   break;
-		default:
-		case CS8:	port_settings.bits = 8;   break;
+	case CS5:	port_settings.bits = 5;   break;
+	case CS6:	port_settings.bits = 6;   break;
+	case CS7:	port_settings.bits = 7;   break;
+	default:
+	case CS8:	port_settings.bits = 8;   break;
 	}
 	dbg("%s - data bits = %d", __func__, port_settings.bits);
-	
+
 	/* determine the parity */
 	if (cflag & PARENB)
 		if (cflag & CMSPAR)
@@ -1239,7 +1268,8 @@ static int firm_setup_port(struct tty_struct *tty) {
 
 	/* figure out the flow control settings */
 	if (cflag & CRTSCTS)
-		port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS);
+		port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
+						WHITEHEAT_HFLOW_RTS);
 	else
 		port_settings.hflow = WHITEHEAT_HFLOW_NONE;
 	dbg("%s - hardware flow control = %s %s %s %s", __func__,
@@ -1247,17 +1277,18 @@ static int firm_setup_port(struct tty_struct *tty) {
 	    (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
 	    (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
 	    (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
-	
+
 	/* determine software flow control */
 	if (I_IXOFF(tty))
 		port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
 	else
 		port_settings.sflow = WHITEHEAT_SFLOW_NONE;
 	dbg("%s - software flow control = %c", __func__, port_settings.sflow);
-	
+
 	port_settings.xon = START_CHAR(tty);
 	port_settings.xoff = STOP_CHAR(tty);
-	dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff);
+	dbg("%s - XON = %2x, XOFF = %2x",
+			__func__, port_settings.xon, port_settings.xoff);
 
 	/* get the baud rate wanted */
 	port_settings.baud = tty_get_baud_rate(tty);
@@ -1267,61 +1298,74 @@ static int firm_setup_port(struct tty_struct *tty) {
 	tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
 	/* handle any settings that aren't specified in the tty structure */
 	port_settings.lloop = 0;
-	
+
 	/* now send the message to the device */
-	return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings));
+	return firm_send_command(port, WHITEHEAT_SETUP_PORT,
+			(__u8 *)&port_settings, sizeof(port_settings));
 }
 
 
-static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) {
+static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
+{
 	struct whiteheat_set_rdb rts_command;
 
 	rts_command.port = port->number - port->serial->minor + 1;
 	rts_command.state = onoff;
-	return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command));
+	return firm_send_command(port, WHITEHEAT_SET_RTS,
+			(__u8 *)&rts_command, sizeof(rts_command));
 }
 
 
-static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) {
+static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
+{
 	struct whiteheat_set_rdb dtr_command;
 
 	dtr_command.port = port->number - port->serial->minor + 1;
 	dtr_command.state = onoff;
-	return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command));
+	return firm_send_command(port, WHITEHEAT_SET_RTS,
+			(__u8 *)&dtr_command, sizeof(dtr_command));
 }
 
 
-static int firm_set_break(struct usb_serial_port *port, __u8 onoff) {
+static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
+{
 	struct whiteheat_set_rdb break_command;
 
 	break_command.port = port->number - port->serial->minor + 1;
 	break_command.state = onoff;
-	return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command));
+	return firm_send_command(port, WHITEHEAT_SET_RTS,
+			(__u8 *)&break_command, sizeof(break_command));
 }
 
 
-static int firm_purge(struct usb_serial_port *port, __u8 rxtx) {
+static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
+{
 	struct whiteheat_purge purge_command;
 
 	purge_command.port = port->number - port->serial->minor + 1;
 	purge_command.what = rxtx;
-	return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command));
+	return firm_send_command(port, WHITEHEAT_PURGE,
+			(__u8 *)&purge_command, sizeof(purge_command));
 }
 
 
-static int firm_get_dtr_rts(struct usb_serial_port *port) {
+static int firm_get_dtr_rts(struct usb_serial_port *port)
+{
 	struct whiteheat_simple get_dr_command;
 
 	get_dr_command.port = port->number - port->serial->minor + 1;
-	return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command));
+	return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
+			(__u8 *)&get_dr_command, sizeof(get_dr_command));
 }
 
 
-static int firm_report_tx_done(struct usb_serial_port *port) {
+static int firm_report_tx_done(struct usb_serial_port *port)
+{
 	struct whiteheat_simple close_command;
 
 	close_command.port = port->number - port->serial->minor + 1;
-	return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command));
+	return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
+			(__u8 *)&close_command, sizeof(close_command));
 }
 
 
@@ -1333,7 +1377,7 @@ static int start_command_port(struct usb_serial *serial)
 	struct usb_serial_port *command_port;
 	struct whiteheat_command_private *command_info;
 	int retval = 0;
-	
+
 	command_port = serial->port[COMMAND_PORT];
 	command_info = usb_get_serial_port_data(command_port);
 	mutex_lock(&command_info->mutex);
@@ -1344,7 +1388,8 @@ static int start_command_port(struct usb_serial *serial)
 		command_port->read_urb->dev = serial->dev;
 		retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
 		if (retval) {
-			err("%s - failed submitting read urb, error %d", __func__, retval);
+			err("%s - failed submitting read urb, error %d",
+							__func__, retval);
 			goto exit;
 		}
 	}
@@ -1414,7 +1459,8 @@ static int start_port_read(struct usb_serial_port *port)
 }
 
 
-static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head)
+static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
+						struct list_head *head)
 {
 	struct whiteheat_urb_wrap *wrap;
 	struct list_head *tmp;
@@ -1463,7 +1509,8 @@ static void rx_data_softint(struct work_struct *work)
 		urb = wrap->urb;
 
 		if (tty && urb->actual_length) {
-			int len = tty_buffer_request_room(tty, urb->actual_length);
+			int len = tty_buffer_request_room(tty,
+							urb->actual_length);
 			/* This stuff can go away now I suspect */
 			if (unlikely(len < urb->actual_length)) {
 				spin_lock_irqsave(&info->lock, flags);
@@ -1480,7 +1527,8 @@ static void rx_data_softint(struct work_struct *work)
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed resubmitting read urb, error %d", __func__, result);
+			err("%s - failed resubmitting read urb, error %d",
+				__func__, result);
 			spin_lock_irqsave(&info->lock, flags);
 			list_add(tmp, &info->rx_urbs_free);
 			continue;
@@ -1499,7 +1547,7 @@ static void rx_data_softint(struct work_struct *work)
 /*****************************************************************************
  * Connect Tech's White Heat module functions
  *****************************************************************************/
-static int __init whiteheat_init (void)
+static int __init whiteheat_init(void)
 {
 	int retval;
 	retval = usb_serial_register(&whiteheat_fake_device);
@@ -1522,19 +1570,19 @@ failed_fake_register:
 }
 
 
-static void __exit whiteheat_exit (void)
+static void __exit whiteheat_exit(void)
 {
-	usb_deregister (&whiteheat_driver);
-	usb_serial_deregister (&whiteheat_fake_device);
-	usb_serial_deregister (&whiteheat_device);
+	usb_deregister(&whiteheat_driver);
+	usb_serial_deregister(&whiteheat_fake_device);
+	usb_serial_deregister(&whiteheat_device);
 }
 
 
 module_init(whiteheat_init);
 module_exit(whiteheat_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 MODULE_FIRMWARE("whiteheat.fw");
diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h
index f1607970566..38065df4d2d 100644
--- a/drivers/usb/serial/whiteheat.h
+++ b/drivers/usb/serial/whiteheat.h
@@ -2,7 +2,7 @@
  * USB ConnectTech WhiteHEAT driver
  *
  *      Copyright (C) 2002
- *          Connect Tech Inc.	
+ *          Connect Tech Inc.
  *
  *      Copyright (C) 1999, 2000
  *          Greg Kroah-Hartman (greg@kroah.com)
@@ -12,7 +12,8 @@
  *      the Free Software Foundation; either version 2 of the License, or
  *      (at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  */
 
@@ -30,13 +31,16 @@
 #define WHITEHEAT_DUMP			7	/* dump memory */
 #define WHITEHEAT_STATUS		8	/* get status */
 #define WHITEHEAT_PURGE			9	/* clear the UART fifos */
-#define WHITEHEAT_GET_DTR_RTS		10	/* get the state of DTR and RTS for a port */
-#define WHITEHEAT_GET_HW_INFO		11	/* get EEPROM info and hardware ID */
+#define WHITEHEAT_GET_DTR_RTS		10	/* get the state of DTR and RTS
+							for a port */
+#define WHITEHEAT_GET_HW_INFO		11	/* get EEPROM info and
+							hardware ID */
 #define WHITEHEAT_REPORT_TX_DONE	12	/* get the next TX done */
 #define WHITEHEAT_EVENT			13	/* unsolicited status events */
-#define WHITEHEAT_ECHO			14	/* send data to the indicated IN endpoint */
-#define WHITEHEAT_DO_TEST		15	/* perform the specified test */
-#define WHITEHEAT_CMD_COMPLETE		16	/* reply for certain commands */
+#define WHITEHEAT_ECHO			14	/* send data to the indicated
+						   IN endpoint */
+#define WHITEHEAT_DO_TEST		15	/* perform specified test */
+#define WHITEHEAT_CMD_COMPLETE		16	/* reply for some commands */
 #define WHITEHEAT_CMD_FAILURE		17	/* reply for failed commands */
 
 
@@ -67,20 +71,28 @@ struct whiteheat_simple {
 #define WHITEHEAT_PAR_MARK	'1'	/* mark (force 1) parity */
 
 #define WHITEHEAT_SFLOW_NONE	'n'	/* no software flow control */
-#define WHITEHEAT_SFLOW_RX	'r'	/* XOFF/ON is sent when RX fills/empties */
-#define WHITEHEAT_SFLOW_TX	't'	/* when received XOFF/ON will stop/start TX */
+#define WHITEHEAT_SFLOW_RX	'r'	/* XOFF/ON is sent when RX
+					   fills/empties */
+#define WHITEHEAT_SFLOW_TX	't'	/* when received XOFF/ON will
+					   stop/start TX */
 #define WHITEHEAT_SFLOW_RXTX	'b'	/* both SFLOW_RX and SFLOW_TX */
 
 #define WHITEHEAT_HFLOW_NONE		0x00	/* no hardware flow control */
-#define WHITEHEAT_HFLOW_RTS_TOGGLE	0x01	/* RTS is on during transmit, off otherwise */
-#define WHITEHEAT_HFLOW_DTR		0x02	/* DTR is off/on when RX fills/empties */
-#define WHITEHEAT_HFLOW_CTS		0x08	/* when received CTS off/on will stop/start TX */
-#define WHITEHEAT_HFLOW_DSR		0x10	/* when received DSR off/on will stop/start TX */
-#define WHITEHEAT_HFLOW_RTS		0x80	/* RTS is off/on when RX fills/empties */
+#define WHITEHEAT_HFLOW_RTS_TOGGLE	0x01	/* RTS is on during transmit,
+						   off otherwise */
+#define WHITEHEAT_HFLOW_DTR		0x02	/* DTR is off/on when RX
+						   fills/empties */
+#define WHITEHEAT_HFLOW_CTS		0x08	/* when received CTS off/on
+						   will stop/start TX */
+#define WHITEHEAT_HFLOW_DSR		0x10	/* when received DSR off/on
+						   will stop/start TX */
+#define WHITEHEAT_HFLOW_RTS		0x80	/* RTS is off/on when RX
+						   fills/empties */
 
 struct whiteheat_port_settings {
 	__u8	port;		/* port number (1 to N) */
-	__u32	baud;		/* any value 7 - 460800, firmware calculates best fit; arrives little endian */
+	__u32	baud;		/* any value 7 - 460800, firmware calculates
+				   best fit; arrives little endian */
 	__u8	bits;		/* 5, 6, 7, or 8 */
 	__u8	stop;		/* 1 or 2, default 1 (2 = 1.5 if bits = 5) */
 	__u8	parity;		/* see WHITEHEAT_PAR_* above */
@@ -167,12 +179,14 @@ struct whiteheat_echo {
  */
 #define WHITEHEAT_TEST_UART_RW		0x01  /* read/write uart registers */
 #define WHITEHEAT_TEST_UART_INTR	0x02  /* uart interrupt */
-#define WHITEHEAT_TEST_SETUP_CONT	0x03  /* setup for PORT_CONT/PORT_DISCONT */
+#define WHITEHEAT_TEST_SETUP_CONT	0x03  /* setup for
+						PORT_CONT/PORT_DISCONT */
 #define WHITEHEAT_TEST_PORT_CONT	0x04  /* port connect */
 #define WHITEHEAT_TEST_PORT_DISCONT	0x05  /* port disconnect */
 #define WHITEHEAT_TEST_UART_CLK_START	0x06  /* uart clock test start */
 #define WHITEHEAT_TEST_UART_CLK_STOP	0x07  /* uart clock test stop */
-#define WHITEHEAT_TEST_MODEM_FT		0x08  /* modem signals, requires a loopback cable/connector */
+#define WHITEHEAT_TEST_MODEM_FT		0x08  /* modem signals, requires a
+						loopback cable/connector */
 #define WHITEHEAT_TEST_ERASE_EEPROM	0x09  /* erase eeprom */
 #define WHITEHEAT_TEST_READ_EEPROM	0x0a  /* read eeprom */
 #define WHITEHEAT_TEST_PROGRAM_EEPROM	0x0b  /* program eeprom */
@@ -198,19 +212,27 @@ struct whiteheat_test {
 #define WHITEHEAT_EVENT_CONNECT		0x08	/* connect field is valid */
 
 #define WHITEHEAT_FLOW_NONE		0x00	/* no flow control active */
-#define WHITEHEAT_FLOW_HARD_OUT		0x01	/* TX is stopped by CTS (waiting for CTS to go on) */
-#define WHITEHEAT_FLOW_HARD_IN		0x02	/* remote TX is stopped by RTS */
-#define WHITEHEAT_FLOW_SOFT_OUT		0x04	/* TX is stopped by XOFF received (waiting for XON) */
-#define WHITEHEAT_FLOW_SOFT_IN		0x08	/* remote TX is stopped by XOFF transmitted */
+#define WHITEHEAT_FLOW_HARD_OUT		0x01	/* TX is stopped by CTS
+						  (waiting for CTS to go on) */
+#define WHITEHEAT_FLOW_HARD_IN		0x02	/* remote TX is stopped
+						  by RTS */
+#define WHITEHEAT_FLOW_SOFT_OUT		0x04	/* TX is stopped by XOFF
+						  received (waiting for XON) */
+#define WHITEHEAT_FLOW_SOFT_IN		0x08	/* remote TX is stopped by XOFF
+						  transmitted */
 #define WHITEHEAT_FLOW_TX_DONE		0x80	/* TX has completed */
 
 struct whiteheat_status_info {
 	__u8	port;		/* port number (1 to N) */
-	__u8	event;		/* indicates what the current event is, see WHITEHEAT_EVENT_* above */
-	__u8	modem;		/* modem signal status (copy of uart's MSR register) */
+	__u8	event;		/* indicates what the current event is,
+					see WHITEHEAT_EVENT_* above */
+	__u8	modem;		/* modem signal status (copy of uart's
+					MSR register) */
 	__u8	error;		/* line status (copy of uart's LSR register) */
-	__u8	flow;		/* flow control state, see WHITEHEAT_FLOW_* above */
-	__u8	connect;	/* 0 means not connected, non-zero means connected */
+	__u8	flow;		/* flow control state, see WHITEHEAT_FLOW_*
+					above */
+	__u8	connect;	/* 0 means not connected, non-zero means
+					connected */
 };
 
 
@@ -256,7 +278,8 @@ struct whiteheat_hw_info {
 struct whiteheat_event_info {
 	__u8	port;		/* port number (1 to N) */
 	__u8	event;		/* see whiteheat_status_info.event */
-	__u8	info;		/* see whiteheat_status_info.modem, .error, .flow, .connect */
+	__u8	info;		/* see whiteheat_status_info.modem, .error,
+					.flow, .connect */
 };
 
 
@@ -269,7 +292,8 @@ struct whiteheat_event_info {
 
 struct whiteheat_test_info {
 	__u8	port;		/* port number (1 to N) */
-	__u8	test;		/* indicates which test this is a response for, see WHITEHEAT_DO_TEST above */
+	__u8	test;		/* indicates which test this is a response for,
+				   see WHITEHEAT_DO_TEST above */
 	__u8	status;		/* see WHITEHEAT_TEST_* above */
 	__u8	results[32];	/* test-dependent results */
 };
-- 
cgit v1.2.3


From 72e2741256e65f2adcc03754523d6a2fdb260e4a Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:09:29 +0100
Subject: whiteheat: fix bugs found in the tidy and audit

Termios tidy up, plus fix break and DTR.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/whiteheat.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 2569b68b833..05374b99a2f 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -671,11 +671,8 @@ static int whiteheat_open(struct tty_struct *tty,
 		goto exit;
 	}
 
-	if (tty) {
-		old_term.c_cflag = ~tty->termios->c_cflag;
-		old_term.c_iflag = ~tty->termios->c_iflag;
-		whiteheat_set_termios(tty, port, &old_term);
-	}
+	if (tty)
+		firm_setup_port(tty);
 
 	/* Work around HCD bugs */
 	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
@@ -926,7 +923,6 @@ static int whiteheat_ioctl(struct tty_struct *tty, struct file *file,
 static void whiteheat_set_termios(struct tty_struct *tty,
 	struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	/* FIXME */
 	firm_setup_port(tty);
 }
 
@@ -1322,7 +1318,7 @@ static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
 
 	dtr_command.port = port->number - port->serial->minor + 1;
 	dtr_command.state = onoff;
-	return firm_send_command(port, WHITEHEAT_SET_RTS,
+	return firm_send_command(port, WHITEHEAT_SET_DTR,
 			(__u8 *)&dtr_command, sizeof(dtr_command));
 }
 
@@ -1333,7 +1329,7 @@ static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
 
 	break_command.port = port->number - port->serial->minor + 1;
 	break_command.state = onoff;
-	return firm_send_command(port, WHITEHEAT_SET_RTS,
+	return firm_send_command(port, WHITEHEAT_SET_BREAK,
 			(__u8 *)&break_command, sizeof(break_command));
 }
 
-- 
cgit v1.2.3


From b69c14992ecbff99d1b2b66d8ccbcffe131c6e38 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:09:39 +0100
Subject: belkin_sa: clean up code

Coding style tidy up for belkin_sa

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/belkin_sa.c | 148 ++++++++++++++++++++++++-----------------
 drivers/usb/serial/belkin_sa.h |  15 +++--
 2 files changed, 94 insertions(+), 69 deletions(-)

diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 1a762692c73..2ebe06c3405 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -7,13 +7,14 @@
  *  This program is largely derived from work by the linux-usb group
  *  and associated source files.  Please see the usb/serial files for
  *  individual credits and copyrights.
- *  
+ *
  * 	This program is free software; you can redistribute it and/or modify
  * 	it under the terms of the GNU General Public License as published by
  * 	the Free Software Foundation; either version 2 of the License, or
  * 	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  * TODO:
  * -- Add true modem contol line query capability.  Currently we track the
@@ -28,7 +29,8 @@
  * 	compressed all the differnent device entries into 1.
  *
  * 30-May-2001 gkh
- *	switched from using spinlock to a semaphore, which fixes lots of problems.
+ *	switched from using spinlock to a semaphore, which fixes lots of
+ *	problems.
  *
  * 08-Apr-2001 gb
  *	- Identify version on module load.
@@ -41,7 +43,7 @@
  *	- Added support for the old Belkin and Peracom devices.
  *	- Made the port able to be opened multiple times.
  *	- Added some defaults incase the line settings are things these devices
- *	  can't support. 
+ *	  can't support.
  *
  * 18-Oct-2000 William Greathouse
  *    Released into the wild (linux-usb-devel)
@@ -72,7 +74,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "belkin_sa.h"
@@ -87,15 +89,19 @@ static int debug;
 #define DRIVER_DESC "USB Belkin Serial converter driver"
 
 /* function prototypes for a Belkin USB Serial Adapter F5U103 */
-static int  belkin_sa_startup		(struct usb_serial *serial);
-static void belkin_sa_shutdown		(struct usb_serial *serial);
-static int  belkin_sa_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void belkin_sa_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void belkin_sa_read_int_callback (struct urb *urb);
-static void belkin_sa_set_termios	(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
-static void belkin_sa_break_ctl		(struct tty_struct *tty, int break_state );
-static int  belkin_sa_tiocmget		(struct tty_struct *tty, struct file *file);
-static int  belkin_sa_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
+static int  belkin_sa_startup(struct usb_serial *serial);
+static void belkin_sa_shutdown(struct usb_serial *serial);
+static int  belkin_sa_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void belkin_sa_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void belkin_sa_read_int_callback(struct urb *urb);
+static void belkin_sa_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios * old);
+static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state);
+static int  belkin_sa_tiocmget(struct tty_struct *tty, struct file *file);
+static int  belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
+					unsigned int set, unsigned int clear);
 
 
 static struct usb_device_id id_table_combined [] = {
@@ -105,10 +111,10 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
 	{ USB_DEVICE(GOHUBS_VID, HANDYLINK_PID) },
 	{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
-	{ }							/* Terminating entry */
+	{ }	/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver belkin_driver = {
 	.name =		"belkin",
@@ -130,7 +136,8 @@ static struct usb_serial_driver belkin_device = {
 	.num_ports =		1,
 	.open =			belkin_sa_open,
 	.close =		belkin_sa_close,
-	.read_int_callback =	belkin_sa_read_int_callback,	/* How we get the status info */
+	.read_int_callback =	belkin_sa_read_int_callback,
+					/* How we get the status info */
 	.set_termios =		belkin_sa_set_termios,
 	.break_ctl =		belkin_sa_break_ctl,
 	.tiocmget =		belkin_sa_tiocmget,
@@ -158,12 +165,12 @@ struct belkin_sa_private {
 #define WDR_TIMEOUT 5000 /* default urb timeout */
 
 /* assumes that struct usb_serial *serial is available */
-#define BSA_USB_CMD(c,v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \
+#define BSA_USB_CMD(c, v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \
 					    (c), BELKIN_SA_SET_REQUEST_TYPE, \
 					    (v), 0, NULL, 0, WDR_TIMEOUT)
 
 /* do some startup allocations not currently performed by usb_serial_probe() */
-static int belkin_sa_startup (struct usb_serial *serial)
+static int belkin_sa_startup(struct usb_serial *serial)
 {
 	struct usb_device *dev = serial->dev;
 	struct belkin_sa_private *priv;
@@ -171,20 +178,23 @@ static int belkin_sa_startup (struct usb_serial *serial)
 	/* allocate the private data structure */
 	priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
 	if (!priv)
-		return (-1); /* error */
+		return -1; /* error */
 	/* set initial values for control structures */
 	spin_lock_init(&priv->lock);
 	priv->control_state = 0;
 	priv->last_lsr = 0;
 	priv->last_msr = 0;
 	/* see comments at top of file */
-	priv->bad_flow_control = (le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0;
-	info("bcdDevice: %04x, bfc: %d", le16_to_cpu(dev->descriptor.bcdDevice), priv->bad_flow_control);
+	priv->bad_flow_control =
+		(le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0;
+	info("bcdDevice: %04x, bfc: %d",
+					le16_to_cpu(dev->descriptor.bcdDevice),
+					priv->bad_flow_control);
 
 	init_waitqueue_head(&serial->port[0]->write_wait);
 	usb_set_serial_port_data(serial->port[0], priv);
-	
-	return (0);
+
+	return 0;
 }
 
 
@@ -192,11 +202,11 @@ static void belkin_sa_shutdown(struct usb_serial *serial)
 {
 	struct belkin_sa_private *priv;
 	int i;
-	
-	dbg ("%s", __func__);
+
+	dbg("%s", __func__);
 
 	/* stop reads and writes on all ports */
-	for (i=0; i < serial->num_ports; ++i) {
+	for (i = 0; i < serial->num_ports; ++i) {
 		/* My special items, the standard routines free my urbs */
 		priv = usb_get_serial_port_data(serial->port[i]);
 		kfree(priv);
@@ -204,7 +214,8 @@ static void belkin_sa_shutdown(struct usb_serial *serial)
 }
 
 
-static int  belkin_sa_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp)
+static int  belkin_sa_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int retval = 0;
 
@@ -233,7 +244,7 @@ exit:
 } /* belkin_sa_open */
 
 
-static void belkin_sa_close (struct tty_struct *tty,
+static void belkin_sa_close(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s port %d", __func__, port->number);
@@ -271,7 +282,8 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 		goto exit;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+					urb->actual_length, data);
 
 	/* Handle known interrupt data */
 	/* ignore data[0] and data[1] */
@@ -279,7 +291,7 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 	priv = usb_get_serial_port_data(port);
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->last_msr = data[BELKIN_SA_MSR_INDEX];
-	
+
 	/* Record Control Line states */
 	if (priv->last_msr & BELKIN_SA_MSR_DSR)
 		priv->control_state |= TIOCM_DSR;
@@ -327,9 +339,9 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 #endif
 	spin_unlock_irqrestore(&priv->lock, flags);
 exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
+		err("%s - usb_submit_urb failed with result %d",
 		     __func__, retval);
 }
 
@@ -348,7 +360,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 	int bad_flow_control;
 	speed_t baud;
 	struct ktermios *termios = tty->termios;
-	
+
 	iflag = termios->c_iflag;
 	cflag = termios->c_cflag;
 
@@ -359,20 +371,21 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 	control_state = priv->control_state;
 	bad_flow_control = priv->bad_flow_control;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	
+
 	old_iflag = old_termios->c_iflag;
 	old_cflag = old_termios->c_cflag;
 
 	/* Set the baud rate */
 	if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
 		/* reassert DTR and (maybe) RTS on transition from B0 */
-		if( (old_cflag&CBAUD) == B0 ) {
+		if ((old_cflag & CBAUD) == B0) {
 			control_state |= (TIOCM_DTR|TIOCM_RTS);
 			if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
 				err("Set DTR error");
 			/* don't set RTS if using hardware flow control */
 			if (!(old_cflag & CRTSCTS))
-				if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 1) < 0)
+				if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
+								, 1) < 0)
 					err("Set RTS error");
 		}
 	}
@@ -392,7 +405,8 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 			err("Set baudrate error");
 	} else {
 		/* Disable flow control */
-		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, BELKIN_SA_FLOW_NONE) < 0)
+		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
+						BELKIN_SA_FLOW_NONE) < 0)
 			err("Disable flowcontrol error");
 		/* Drop RTS and DTR */
 		control_state &= ~(TIOCM_DTR | TIOCM_RTS);
@@ -403,9 +417,10 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 	}
 
 	/* set the parity */
-	if( (cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD)) ) {
+	if ((cflag ^ old_cflag) & (PARENB | PARODD)) {
 		if (cflag & PARENB)
-			urb_value = (cflag & PARODD) ?  BELKIN_SA_PARITY_ODD : BELKIN_SA_PARITY_EVEN;
+			urb_value = (cflag & PARODD) ?  BELKIN_SA_PARITY_ODD
+						: BELKIN_SA_PARITY_EVEN;
 		else
 			urb_value = BELKIN_SA_PARITY_NONE;
 		if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
@@ -413,31 +428,40 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 	}
 
 	/* set the number of data bits */
-	if( (cflag&CSIZE) != (old_cflag&CSIZE) ) {
+	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
 		switch (cflag & CSIZE) {
-			case CS5: urb_value = BELKIN_SA_DATA_BITS(5); break;
-			case CS6: urb_value = BELKIN_SA_DATA_BITS(6); break;
-			case CS7: urb_value = BELKIN_SA_DATA_BITS(7); break;
-			case CS8: urb_value = BELKIN_SA_DATA_BITS(8); break;
-			default: dbg("CSIZE was not CS5-CS8, using default of 8");
-				urb_value = BELKIN_SA_DATA_BITS(8);
-				break;
+		case CS5:
+			urb_value = BELKIN_SA_DATA_BITS(5);
+			break;
+		case CS6:
+			urb_value = BELKIN_SA_DATA_BITS(6);
+			break;
+		case CS7:
+			urb_value = BELKIN_SA_DATA_BITS(7);
+			break;
+		case CS8:
+			urb_value = BELKIN_SA_DATA_BITS(8);
+			break;
+		default: dbg("CSIZE was not CS5-CS8, using default of 8");
+			urb_value = BELKIN_SA_DATA_BITS(8);
+			break;
 		}
 		if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
 			err("Set data bits error");
 	}
 
 	/* set the number of stop bits */
-	if( (cflag&CSTOPB) != (old_cflag&CSTOPB) ) {
-		urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2) : BELKIN_SA_STOP_BITS(1);
-		if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST, urb_value) < 0)
+	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
+		urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2)
+						: BELKIN_SA_STOP_BITS(1);
+		if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
+							urb_value) < 0)
 			err("Set stop bits error");
 	}
 
 	/* Set flow control */
-	if( (iflag&IXOFF)   != (old_iflag&IXOFF)
-	||	(iflag&IXON)    != (old_iflag&IXON)
-	||  (cflag&CRTSCTS) != (old_cflag&CRTSCTS) ) {
+	if (((iflag ^ old_iflag) & (IXOFF | IXON)) ||
+		((cflag ^ old_cflag) & CRTSCTS)) {
 		urb_value = 0;
 		if ((iflag & IXOFF) || (iflag & IXON))
 			urb_value |= (BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON);
@@ -479,7 +503,7 @@ static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
 	unsigned long control_state;
 	unsigned long flags;
-	
+
 	dbg("%s", __func__);
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -501,7 +525,7 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
 	int retval;
 	int rts = 0;
 	int dtr = 0;
-	
+
 	dbg("%s", __func__);
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -563,17 +587,17 @@ failed_usb_serial_register:
 
 static void __exit belkin_sa_exit (void)
 {
-	usb_deregister (&belkin_driver);
+	usb_deregister(&belkin_driver);
 	usb_serial_deregister(&belkin_device);
 }
 
 
-module_init (belkin_sa_init);
-module_exit (belkin_sa_exit);
+module_init(belkin_sa_init);
+module_exit(belkin_sa_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_VERSION( DRIVER_VERSION );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/belkin_sa.h b/drivers/usb/serial/belkin_sa.h
index 9116b92f462..c66a6730d38 100644
--- a/drivers/usb/serial/belkin_sa.h
+++ b/drivers/usb/serial/belkin_sa.h
@@ -7,13 +7,14 @@
  *  This program is largely derived from work by the linux-usb group
  *  and associated source files.  Please see the usb/serial files for
  *  individual credits and copyrights.
- *  
+ *
  * 	This program is free software; you can redistribute it and/or modify
  * 	it under the terms of the GNU General Public License as published by
  * 	the Free Software Foundation; either version 2 of the License, or
  * 	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  * 12-Mar-2001 gkh
  *	Added GoHubs GO-COM232 device id.
@@ -27,7 +28,7 @@
  *    adapter, so pardon any stupid mistakes.  All of the information
  *    I am using to write this driver was acquired by using a modified
  *    UsbSnoop on Windows2000.
- *    
+ *
  */
 
 #ifndef __LINUX_USB_SERIAL_BSA_H
@@ -96,20 +97,20 @@
 
 /*
  * It seems that the interrupt pipe is closely modelled after the
- * 16550 register layout.  This is probably because the adapter can 
+ * 16550 register layout.  This is probably because the adapter can
  * be used in a "DOS" environment to simulate a standard hardware port.
  */
-#define BELKIN_SA_LSR_INDEX		2		/* Line Status Register */
+#define BELKIN_SA_LSR_INDEX		2	/*     Line Status Register */
 #define BELKIN_SA_LSR_RDR		0x01	/* receive data ready */
 #define BELKIN_SA_LSR_OE		0x02	/* overrun error */
 #define BELKIN_SA_LSR_PE		0x04	/* parity error */
 #define BELKIN_SA_LSR_FE		0x08	/* framing error */
 #define BELKIN_SA_LSR_BI		0x10	/* break indicator */
-#define BELKIN_SA_LSR_THE		0x20	/* transmit holding register empty */
+#define BELKIN_SA_LSR_THE		0x20	/* tx holding register empty */
 #define BELKIN_SA_LSR_TE		0x40	/* transmit register empty */
 #define BELKIN_SA_LSR_ERR		0x80	/* OE | PE | FE | BI */
 
-#define BELKIN_SA_MSR_INDEX		3		/* Modem Status Register */
+#define BELKIN_SA_MSR_INDEX		3	/*     Modem Status Register */
 #define BELKIN_SA_MSR_DCTS		0x01	/* Delta CTS */
 #define BELKIN_SA_MSR_DDSR		0x02	/* Delta DSR */
 #define BELKIN_SA_MSR_DRI		0x04	/* Delta RI */
-- 
cgit v1.2.3


From c97611c16d9b3c37fcf3c18cc442dfde3a8b5d43 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:09:48 +0100
Subject: usb-serial-bus: tidy coding style

Tidy up

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/bus.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 0b14aea8ebd..83bbb5bca2e 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -15,7 +15,8 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
+static int usb_serial_device_match(struct device *dev,
+						struct device_driver *drv)
 {
 	struct usb_serial_driver *driver;
 	const struct usb_serial_port *port;
@@ -46,7 +47,7 @@ static ssize_t show_port_number(struct device *dev,
 
 static DEVICE_ATTR(port_number, S_IRUGO, show_port_number, NULL);
 
-static int usb_serial_device_probe (struct device *dev)
+static int usb_serial_device_probe(struct device *dev)
 {
 	struct usb_serial_driver *driver;
 	struct usb_serial_port *port;
@@ -66,7 +67,7 @@ static int usb_serial_device_probe (struct device *dev)
 			retval = -EIO;
 			goto exit;
 		}
-		retval = driver->port_probe (port);
+		retval = driver->port_probe(port);
 		module_put(driver->driver.owner);
 		if (retval)
 			goto exit;
@@ -77,8 +78,8 @@ static int usb_serial_device_probe (struct device *dev)
 		goto exit;
 
 	minor = port->number;
-	tty_register_device (usb_serial_tty_driver, minor, dev);
-	dev_info(&port->serial->dev->dev, 
+	tty_register_device(usb_serial_tty_driver, minor, dev);
+	dev_info(&port->serial->dev->dev,
 		 "%s converter now attached to ttyUSB%d\n",
 		 driver->description, minor);
 
@@ -86,7 +87,7 @@ exit:
 	return retval;
 }
 
-static int usb_serial_device_remove (struct device *dev)
+static int usb_serial_device_remove(struct device *dev)
 {
 	struct usb_serial_driver *driver;
 	struct usb_serial_port *port;
@@ -94,9 +95,8 @@ static int usb_serial_device_remove (struct device *dev)
 	int minor;
 
 	port = to_usb_serial_port(dev);
-	if (!port) {
+	if (!port)
 		return -ENODEV;
-	}
 
 	device_remove_file(&port->dev, &dev_attr_port_number);
 
@@ -107,12 +107,12 @@ static int usb_serial_device_remove (struct device *dev)
 			retval = -EIO;
 			goto exit;
 		}
-		retval = driver->port_remove (port);
+		retval = driver->port_remove(port);
 		module_put(driver->driver.owner);
 	}
 exit:
 	minor = port->number;
-	tty_unregister_device (usb_serial_tty_driver, minor);
+	tty_unregister_device(usb_serial_tty_driver, minor);
 	dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
 		 driver->description, minor);
 
-- 
cgit v1.2.3


From 4dbd5a0961ff55cb8a7bce309dd5ef9b04090570 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:09:57 +0100
Subject: tty-usb-console: tidy the USB console code

Code tidy

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/console.c | 127 ++++++++++++++++++++++---------------------
 1 file changed, 66 insertions(+), 61 deletions(-)

diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 940f5de6898..9a4cd0a932b 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -6,7 +6,7 @@
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License version
  *	2 as published by the Free Software Foundation.
- * 
+ *
  * Thanks to Randy Dunlap for the original version of this code.
  *
  */
@@ -67,7 +67,7 @@ static int usb_console_setup(struct console *co, char *options)
 	struct tty_struct *tty = NULL;
 	struct ktermios *termios = NULL, dummy;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	if (options) {
 		baud = simple_strtoul(options, NULL, 10);
@@ -84,52 +84,52 @@ static int usb_console_setup(struct console *co, char *options)
 
 	/* build a cflag setting */
 	switch (baud) {
-		case 1200:
-			cflag |= B1200;
-			break;
-		case 2400:
-			cflag |= B2400;
-			break;
-		case 4800:
-			cflag |= B4800;
-			break;
-		case 19200:
-			cflag |= B19200;
-			break;
-		case 38400:
-			cflag |= B38400;
-			break;
-		case 57600:
-			cflag |= B57600;
-			break;
-		case 115200:
-			cflag |= B115200;
-			break;
-		case 9600:
-		default:
-			cflag |= B9600;
-			/*
-			 * Set this to a sane value to prevent a divide error
-			 */
-			baud  = 9600;
-			break;
+	case 1200:
+		cflag |= B1200;
+		break;
+	case 2400:
+		cflag |= B2400;
+		break;
+	case 4800:
+		cflag |= B4800;
+		break;
+	case 19200:
+		cflag |= B19200;
+		break;
+	case 38400:
+		cflag |= B38400;
+		break;
+	case 57600:
+		cflag |= B57600;
+		break;
+	case 115200:
+		cflag |= B115200;
+		break;
+	case 9600:
+	default:
+		cflag |= B9600;
+		/*
+		 * Set this to a sane value to prevent a divide error
+		 */
+		baud  = 9600;
+		break;
 	}
 	switch (bits) {
-		case 7:
-			cflag |= CS7;
-			break;
-		default:
-		case 8:
-			cflag |= CS8;
-			break;
+	case 7:
+		cflag |= CS7;
+		break;
+	default:
+	case 8:
+		cflag |= CS8;
+		break;
 	}
 	switch (parity) {
-		case 'o': case 'O':
-			cflag |= PARODD;
-			break;
-		case 'e': case 'E':
-			cflag |= PARENB;
-			break;
+	case 'o': case 'O':
+		cflag |= PARODD;
+		break;
+	case 'e': case 'E':
+		cflag |= PARENB;
+		break;
 	}
 	co->cflag = cflag;
 
@@ -140,7 +140,7 @@ static int usb_console_setup(struct console *co, char *options)
 	serial = usb_serial_get_by_index(co->index);
 	if (serial == NULL) {
 		/* no device is connected yet, sorry :( */
-		err ("No USB device connected to ttyUSB%i", co->index);
+		err("No USB device connected to ttyUSB%i", co->index);
 		return -ENODEV;
 	}
 
@@ -148,7 +148,7 @@ static int usb_console_setup(struct console *co, char *options)
 	port->port.tty = NULL;
 
 	info->port = port;
-	 
+
 	++port->port.count;
 	if (port->port.count == 1) {
 		if (serial->type->set_termios) {
@@ -174,7 +174,7 @@ static int usb_console_setup(struct console *co, char *options)
 			port->port.tty = tty;
 		}
 
-		/* only call the device specific open if this 
+		/* only call the device specific open if this
 		 * is the first time the port is opened */
 		if (serial->type->open)
 			retval = serial->type->open(NULL, port, NULL);
@@ -211,7 +211,8 @@ reset_open_count:
 goto out;
 }
 
-static void usb_console_write(struct console *co, const char *buf, unsigned count)
+static void usb_console_write(struct console *co,
+					const char *buf, unsigned count)
 {
 	static struct usbcons_info *info = &usbcons_info;
 	struct usb_serial_port *port = info->port;
@@ -228,7 +229,7 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
 	if (!port->port.count) {
-		dbg ("%s - port not opened", __func__);
+		dbg("%s - port not opened", __func__);
 		return;
 	}
 
@@ -236,14 +237,15 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun
 		unsigned int i;
 		unsigned int lf;
 		/* search for LF so we can insert CR if necessary */
-		for (i=0, lf=0 ; i < count ; i++) {
+		for (i = 0, lf = 0 ; i < count ; i++) {
 			if (*(buf + i) == 10) {
 				lf = 1;
 				i++;
 				break;
 			}
 		}
-		/* pass on to the driver specific version of this function if it is available */
+		/* pass on to the driver specific version of this function if
+		   it is available */
 		if (serial->type->write)
 			retval = serial->type->write(NULL, port, buf, i);
 		else
@@ -253,9 +255,11 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun
 			/* append CR after LF */
 			unsigned char cr = 13;
 			if (serial->type->write)
-				retval = serial->type->write(NULL, port, &cr, 1);
+				retval = serial->type->write(NULL,
+								port, &cr, 1);
 			else
-				retval = usb_serial_generic_write(NULL, port, &cr, 1);
+				retval = usb_serial_generic_write(NULL,
+								port, &cr, 1);
 			dbg("%s - return value : %d", __func__, retval);
 		}
 		buf += i;
@@ -273,18 +277,19 @@ static struct console usbcons = {
 
 void usb_serial_console_disconnect(struct usb_serial *serial)
 {
-	if (serial && serial->port && serial->port[0] && serial->port[0] == usbcons_info.port) {
+	if (serial && serial->port && serial->port[0]
+				&& serial->port[0] == usbcons_info.port) {
 		usb_serial_console_exit();
 		usb_serial_put(serial);
 	}
 }
 
-void usb_serial_console_init (int serial_debug, int minor)
+void usb_serial_console_init(int serial_debug, int minor)
 {
 	debug = serial_debug;
 
 	if (minor == 0) {
-		/* 
+		/*
 		 * Call register_console() if this is the first device plugged
 		 * in.  If we call it earlier, then the callback to
 		 * console_setup() will fail, as there is not a device seen by
@@ -293,16 +298,16 @@ void usb_serial_console_init (int serial_debug, int minor)
 		/*
 		 * Register console.
 		 * NOTES:
-		 * console_setup() is called (back) immediately (from register_console).
-		 * console_write() is called immediately from register_console iff
-		 * CON_PRINTBUFFER is set in flags.
+		 * console_setup() is called (back) immediately (from
+		 * register_console). console_write() is called immediately
+		 * from register_console iff CON_PRINTBUFFER is set in flags.
 		 */
-		dbg ("registering the USB serial console.");
+		dbg("registering the USB serial console.");
 		register_console(&usbcons);
 	}
 }
 
-void usb_serial_console_exit (void)
+void usb_serial_console_exit(void)
 {
 	if (usbcons_info.port) {
 		unregister_console(&usbcons);
-- 
cgit v1.2.3


From c17ee886976b64d29ea89ee5d87751438e26025b Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:10:08 +0100
Subject: tty-usb-console: Fix termios

Setting CFLAG bits is all well and good but you must sort out ispeed and
ospeed properly.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/console.c | 37 +++++--------------------------------
 1 file changed, 5 insertions(+), 32 deletions(-)

diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 9a4cd0a932b..7b74238ad1c 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -81,39 +81,11 @@ static int usb_console_setup(struct console *co, char *options)
 		if (*s)
 			doflow = (*s++ == 'r');
 	}
+	
+	/* Sane default */
+	if (baud == 0)
+		baud = 9600;
 
-	/* build a cflag setting */
-	switch (baud) {
-	case 1200:
-		cflag |= B1200;
-		break;
-	case 2400:
-		cflag |= B2400;
-		break;
-	case 4800:
-		cflag |= B4800;
-		break;
-	case 19200:
-		cflag |= B19200;
-		break;
-	case 38400:
-		cflag |= B38400;
-		break;
-	case 57600:
-		cflag |= B57600;
-		break;
-	case 115200:
-		cflag |= B115200;
-		break;
-	case 9600:
-	default:
-		cflag |= B9600;
-		/*
-		 * Set this to a sane value to prevent a divide error
-		 */
-		baud  = 9600;
-		break;
-	}
 	switch (bits) {
 	case 7:
 		cflag |= CS7;
@@ -188,6 +160,7 @@ static int usb_console_setup(struct console *co, char *options)
 
 		if (serial->type->set_termios) {
 			termios->c_cflag = cflag;
+			tty_termios_encode_baud_rate(termios, baud, baud);
 			serial->type->set_termios(NULL, port, &dummy);
 
 			port->port.tty = NULL;
-- 
cgit v1.2.3


From ff7eb602605cc0100f089d57966fcd347e137137 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:10:17 +0100
Subject: cp2101: coding style

Bring up to coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/cp2101.c    | 315 ++++++++++++++++++++---------------------
 drivers/usb/serial/whiteheat.c |   1 -
 2 files changed, 156 insertions(+), 160 deletions(-)

diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 46c33fc9f6c..442cba69cce 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb/serial.h>
 
 /*
@@ -45,12 +45,12 @@ static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
 static void cp2101_get_termios(struct tty_struct *);
 static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
 							struct ktermios*);
-static int cp2101_tiocmget (struct tty_struct *, struct file *);
-static int cp2101_tiocmset (struct tty_struct *, struct file *,
+static int cp2101_tiocmget(struct tty_struct *, struct file *);
+static int cp2101_tiocmset(struct tty_struct *, struct file *,
 		unsigned int, unsigned int);
 static void cp2101_break_ctl(struct tty_struct *, int);
-static int cp2101_startup (struct usb_serial *);
-static void cp2101_shutdown(struct usb_serial*);
+static int cp2101_startup(struct usb_serial *);
+static void cp2101_shutdown(struct usb_serial *);
 
 
 static int debug;
@@ -96,7 +96,7 @@ static struct usb_device_id id_table [] = {
 	{ } /* Terminating Entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver cp2101_driver = {
 	.name		= "cp2101",
@@ -205,12 +205,12 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 	request++;
 
 	/* Issue the request, attempting to read 'size' bytes */
-	result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0),
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
 				0, buf, size, 300);
 
 	/* Convert data into an array of integers */
-	for (i=0; i<length; i++)
+	for (i = 0; i < length; i++)
 		data[i] = le32_to_cpu(buf[i]);
 
 	kfree(buf);
@@ -253,12 +253,12 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request,
 		buf[i] = cpu_to_le32(data[i]);
 
 	if (size > 2) {
-		result = usb_control_msg (serial->dev,
+		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, 0x0000,
 				0, buf, size, 300);
 	} else {
-		result = usb_control_msg (serial->dev,
+		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, data[0],
 				0, NULL, 0, 300);
@@ -274,7 +274,7 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request,
 	}
 
 	/* Single data value */
-	result = usb_control_msg (serial->dev,
+	result = usb_control_msg(serial->dev,
 			usb_sndctrlpipe(serial->dev, 0),
 			request, REQTYPE_HOST_TO_DEVICE, data[0],
 			0, NULL, 0, 300);
@@ -292,7 +292,7 @@ static inline int cp2101_set_config_single(struct usb_serial_port *port,
 	return cp2101_set_config(port, request, &data, 2);
 }
 
-static int cp2101_open (struct tty_struct *tty, struct usb_serial_port *port,
+static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
@@ -307,7 +307,7 @@ static int cp2101_open (struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	/* Start reading from the device */
-	usb_fill_bulk_urb (port->read_urb, serial->dev,
+	usb_fill_bulk_urb(port->read_urb, serial->dev,
 			usb_rcvbulkpipe(serial->dev,
 			port->bulk_in_endpointAddress),
 			port->read_urb->transfer_buffer,
@@ -330,7 +330,7 @@ static int cp2101_open (struct tty_struct *tty, struct usb_serial_port *port,
 	return 0;
 }
 
-static void cp2101_cleanup (struct usb_serial_port *port)
+static void cp2101_cleanup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
@@ -346,7 +346,7 @@ static void cp2101_cleanup (struct usb_serial_port *port)
 }
 
 static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file * filp)
+					struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -388,99 +388,97 @@ static void cp2101_get_termios (struct tty_struct *tty)
 
 	cp2101_get_config(port, CP2101_BITS, &bits, 2);
 	cflag &= ~CSIZE;
-	switch(bits & BITS_DATA_MASK) {
-		case BITS_DATA_5:
-			dbg("%s - data bits = 5", __func__);
-			cflag |= CS5;
-			break;
-		case BITS_DATA_6:
-			dbg("%s - data bits = 6", __func__);
-			cflag |= CS6;
-			break;
-		case BITS_DATA_7:
-			dbg("%s - data bits = 7", __func__);
-			cflag |= CS7;
-			break;
-		case BITS_DATA_8:
-			dbg("%s - data bits = 8", __func__);
-			cflag |= CS8;
-			break;
-		case BITS_DATA_9:
-			dbg("%s - data bits = 9 (not supported, "
-					"using 8 data bits)", __func__);
-			cflag |= CS8;
-			bits &= ~BITS_DATA_MASK;
-			bits |= BITS_DATA_8;
-			cp2101_set_config(port, CP2101_BITS, &bits, 2);
-			break;
-		default:
-			dbg("%s - Unknown number of data bits, "
-					"using 8", __func__);
-			cflag |= CS8;
-			bits &= ~BITS_DATA_MASK;
-			bits |= BITS_DATA_8;
-			cp2101_set_config(port, CP2101_BITS, &bits, 2);
-			break;
+	switch (bits & BITS_DATA_MASK) {
+	case BITS_DATA_5:
+		dbg("%s - data bits = 5", __func__);
+		cflag |= CS5;
+		break;
+	case BITS_DATA_6:
+		dbg("%s - data bits = 6", __func__);
+		cflag |= CS6;
+		break;
+	case BITS_DATA_7:
+		dbg("%s - data bits = 7", __func__);
+		cflag |= CS7;
+		break;
+	case BITS_DATA_8:
+		dbg("%s - data bits = 8", __func__);
+		cflag |= CS8;
+		break;
+	case BITS_DATA_9:
+		dbg("%s - data bits = 9 (not supported, using 8 data bits)",
+								__func__);
+		cflag |= CS8;
+		bits &= ~BITS_DATA_MASK;
+		bits |= BITS_DATA_8;
+		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		break;
+	default:
+		dbg("%s - Unknown number of data bits, using 8", __func__);
+		cflag |= CS8;
+		bits &= ~BITS_DATA_MASK;
+		bits |= BITS_DATA_8;
+		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		break;
 	}
 
-	switch(bits & BITS_PARITY_MASK) {
-		case BITS_PARITY_NONE:
-			dbg("%s - parity = NONE", __func__);
-			cflag &= ~PARENB;
-			break;
-		case BITS_PARITY_ODD:
-			dbg("%s - parity = ODD", __func__);
-			cflag |= (PARENB|PARODD);
-			break;
-		case BITS_PARITY_EVEN:
-			dbg("%s - parity = EVEN", __func__);
-			cflag &= ~PARODD;
-			cflag |= PARENB;
-			break;
-		case BITS_PARITY_MARK:
-			dbg("%s - parity = MARK (not supported, "
-					"disabling parity)", __func__);
-			cflag &= ~PARENB;
-			bits &= ~BITS_PARITY_MASK;
-			cp2101_set_config(port, CP2101_BITS, &bits, 2);
-			break;
-		case BITS_PARITY_SPACE:
-			dbg("%s - parity = SPACE (not supported, "
-					"disabling parity)", __func__);
-			cflag &= ~PARENB;
-			bits &= ~BITS_PARITY_MASK;
-			cp2101_set_config(port, CP2101_BITS, &bits, 2);
-			break;
-		default:
-			dbg("%s - Unknown parity mode, "
-					"disabling parity", __func__);
-			cflag &= ~PARENB;
-			bits &= ~BITS_PARITY_MASK;
-			cp2101_set_config(port, CP2101_BITS, &bits, 2);
-			break;
+	switch (bits & BITS_PARITY_MASK) {
+	case BITS_PARITY_NONE:
+		dbg("%s - parity = NONE", __func__);
+		cflag &= ~PARENB;
+		break;
+	case BITS_PARITY_ODD:
+		dbg("%s - parity = ODD", __func__);
+		cflag |= (PARENB|PARODD);
+		break;
+	case BITS_PARITY_EVEN:
+		dbg("%s - parity = EVEN", __func__);
+		cflag &= ~PARODD;
+		cflag |= PARENB;
+		break;
+	case BITS_PARITY_MARK:
+		dbg("%s - parity = MARK (not supported, disabling parity)",
+				__func__);
+		cflag &= ~PARENB;
+		bits &= ~BITS_PARITY_MASK;
+		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		break;
+	case BITS_PARITY_SPACE:
+		dbg("%s - parity = SPACE (not supported, disabling parity)",
+				__func__);
+		cflag &= ~PARENB;
+		bits &= ~BITS_PARITY_MASK;
+		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		break;
+	default:
+		dbg("%s - Unknown parity mode, disabling parity", __func__);
+		cflag &= ~PARENB;
+		bits &= ~BITS_PARITY_MASK;
+		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		break;
 	}
 
 	cflag &= ~CSTOPB;
-	switch(bits & BITS_STOP_MASK) {
-		case BITS_STOP_1:
-			dbg("%s - stop bits = 1", __func__);
-			break;
-		case BITS_STOP_1_5:
-			dbg("%s - stop bits = 1.5 (not supported, "
-					"using 1 stop bit)", __func__);
-			bits &= ~BITS_STOP_MASK;
-			cp2101_set_config(port, CP2101_BITS, &bits, 2);
-			break;
-		case BITS_STOP_2:
-			dbg("%s - stop bits = 2", __func__);
-			cflag |= CSTOPB;
-			break;
-		default:
-			dbg("%s - Unknown number of stop bits, "
-					"using 1 stop bit", __func__);
-			bits &= ~BITS_STOP_MASK;
-			cp2101_set_config(port, CP2101_BITS, &bits, 2);
-			break;
+	switch (bits & BITS_STOP_MASK) {
+	case BITS_STOP_1:
+		dbg("%s - stop bits = 1", __func__);
+		break;
+	case BITS_STOP_1_5:
+		dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
+								__func__);
+		bits &= ~BITS_STOP_MASK;
+		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		break;
+	case BITS_STOP_2:
+		dbg("%s - stop bits = 2", __func__);
+		cflag |= CSTOPB;
+		break;
+	default:
+		dbg("%s - Unknown number of stop bits, using 1 stop bit",
+								__func__);
+		bits &= ~BITS_STOP_MASK;
+		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		break;
 	}
 
 	cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
@@ -495,7 +493,7 @@ static void cp2101_get_termios (struct tty_struct *tty)
 	tty->termios->c_cflag = cflag;
 }
 
-static void cp2101_set_termios (struct tty_struct *tty,
+static void cp2101_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned int cflag, old_cflag;
@@ -515,30 +513,30 @@ static void cp2101_set_termios (struct tty_struct *tty,
 	/* If the baud rate is to be updated*/
 	if (baud != tty_termios_baud_rate(old_termios)) {
 		switch (baud) {
-			case 0:
-			case 600:
-			case 1200:
-			case 1800:
-			case 2400:
-			case 4800:
-			case 7200:
-			case 9600:
-			case 14400:
-			case 19200:
-			case 28800:
-			case 38400:
-			case 55854:
-			case 57600:
-			case 115200:
-			case 127117:
-			case 230400:
-			case 460800:
-			case 921600:
-			case 3686400:
-				break;
-			default:
-				baud = 9600;
-				break;
+		case 0:
+		case 600:
+		case 1200:
+		case 1800:
+		case 2400:
+		case 4800:
+		case 7200:
+		case 9600:
+		case 14400:
+		case 19200:
+		case 28800:
+		case 38400:
+		case 55854:
+		case 57600:
+		case 115200:
+		case 127117:
+		case 230400:
+		case 460800:
+		case 921600:
+		case 3686400:
+			break;
+		default:
+			baud = 9600;
+			break;
 		}
 
 		if (baud) {
@@ -560,28 +558,28 @@ static void cp2101_set_termios (struct tty_struct *tty,
 		cp2101_get_config(port, CP2101_BITS, &bits, 2);
 		bits &= ~BITS_DATA_MASK;
 		switch (cflag & CSIZE) {
-			case CS5:
-				bits |= BITS_DATA_5;
-				dbg("%s - data bits = 5", __func__);
-				break;
-			case CS6:
-				bits |= BITS_DATA_6;
-				dbg("%s - data bits = 6", __func__);
-				break;
-			case CS7:
-				bits |= BITS_DATA_7;
-				dbg("%s - data bits = 7", __func__);
-				break;
-			case CS8:
-				bits |= BITS_DATA_8;
-				dbg("%s - data bits = 8", __func__);
-				break;
-			/*case CS9:
-			 	bits |= BITS_DATA_9;
-				dbg("%s - data bits = 9", __func__);
-				break;*/
-			default:
-				dev_err(&port->dev, "cp2101 driver does not "
+		case CS5:
+			bits |= BITS_DATA_5;
+			dbg("%s - data bits = 5", __func__);
+			break;
+		case CS6:
+			bits |= BITS_DATA_6;
+			dbg("%s - data bits = 6", __func__);
+			break;
+		case CS7:
+			bits |= BITS_DATA_7;
+			dbg("%s - data bits = 7", __func__);
+			break;
+		case CS8:
+			bits |= BITS_DATA_8;
+			dbg("%s - data bits = 8", __func__);
+			break;
+		/*case CS9:
+			bits |= BITS_DATA_9;
+			dbg("%s - data bits = 9", __func__);
+			break;*/
+		default:
+			dev_err(&port->dev, "cp2101 driver does not "
 					"support the number of bits requested,"
 					" using 8 bit mode\n");
 				bits |= BITS_DATA_8;
@@ -714,30 +712,29 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
 	else
 		state = BREAK_ON;
 	dbg("%s - turning break %s", __func__,
-			state==BREAK_OFF ? "off" : "on");
+			state == BREAK_OFF ? "off" : "on");
 	cp2101_set_config(port, CP2101_BREAK, &state, 2);
 }
 
-static int cp2101_startup (struct usb_serial *serial)
+static int cp2101_startup(struct usb_serial *serial)
 {
 	/* CP2101 buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
 	return 0;
 }
 
-static void cp2101_shutdown (struct usb_serial *serial)
+static void cp2101_shutdown(struct usb_serial *serial)
 {
 	int i;
 
 	dbg("%s", __func__);
 
 	/* Stop reads and writes on all ports */
-	for (i=0; i < serial->num_ports; ++i) {
+	for (i = 0; i < serial->num_ports; ++i)
 		cp2101_cleanup(serial->port[i]);
-	}
 }
 
-static int __init cp2101_init (void)
+static int __init cp2101_init(void)
 {
 	int retval;
 
@@ -757,10 +754,10 @@ static int __init cp2101_init (void)
 	return 0;
 }
 
-static void __exit cp2101_exit (void)
+static void __exit cp2101_exit(void)
 {
-	usb_deregister (&cp2101_driver);
-	usb_serial_deregister (&cp2101_device);
+	usb_deregister(&cp2101_driver);
+	usb_serial_deregister(&cp2101_device);
 }
 
 module_init(cp2101_init);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 05374b99a2f..3a9d14384a4 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -646,7 +646,6 @@ static int whiteheat_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
 	int		retval = 0;
-	struct ktermios	old_term;
 
 	dbg("%s - port %d", __func__, port->number);
 
-- 
cgit v1.2.3


From b9c52f155f86eca9c4625b254b5f41dc151431be Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:10:27 +0100
Subject: cyberjack: Coding style

Coding style fixups

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/cyberjack.c | 131 ++++++++++++++++++++++-------------------
 1 file changed, 69 insertions(+), 62 deletions(-)

diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 546178ea6f2..b4d72351cb9 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -37,7 +37,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -65,7 +65,7 @@ static void cyberjack_close(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
 static int cyberjack_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
-static int cyberjack_write_room( struct tty_struct *tty);
+static int cyberjack_write_room(struct tty_struct *tty);
 static void cyberjack_read_int_callback(struct urb *urb);
 static void cyberjack_read_bulk_callback(struct urb *urb);
 static void cyberjack_write_bulk_callback(struct urb *urb);
@@ -75,7 +75,7 @@ static struct usb_device_id id_table [] = {
 	{ }			/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver cyberjack_driver = {
 	.name =		"cyberjack",
@@ -138,20 +138,20 @@ static int cyberjack_startup(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		int result;
 		serial->port[i]->interrupt_in_urb->dev = serial->dev;
-		result = usb_submit_urb(serial->port[i]->interrupt_in_urb, 
+		result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
 					GFP_KERNEL);
 		if (result)
 			err(" usb_submit_urb(read int) failed");
 		dbg("%s - usb_submit_urb(int urb)", __func__);
 	}
 
-	return( 0 );
+	return 0;
 }
 
 static void cyberjack_shutdown(struct usb_serial *serial)
 {
 	int i;
-	
+
 	dbg("%s", __func__);
 
 	for (i = 0; i < serial->num_ports; ++i) {
@@ -161,7 +161,7 @@ static void cyberjack_shutdown(struct usb_serial *serial)
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
 }
-	
+
 static int  cyberjack_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
@@ -171,7 +171,7 @@ static int  cyberjack_open(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	dbg("%s - usb_clear_halt", __func__ );
+	dbg("%s - usb_clear_halt", __func__);
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 
 	/* force low_latency on so that our tty_push actually forces
@@ -230,7 +230,7 @@ static int cyberjack_write(struct tty_struct *tty,
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	if( (count+priv->wrfilled) > sizeof(priv->wrbuf) ) {
+	if (count+priv->wrfilled > sizeof(priv->wrbuf)) {
 		/* To much data for buffer. Reset buffer. */
 		priv->wrfilled = 0;
 		port->write_urb_busy = 0;
@@ -239,42 +239,43 @@ static int cyberjack_write(struct tty_struct *tty,
 	}
 
 	/* Copy data */
-	memcpy (priv->wrbuf+priv->wrfilled, buf, count);
+	memcpy(priv->wrbuf + priv->wrfilled, buf, count);
 
 	usb_serial_debug_data(debug, &port->dev, __func__, count,
-		priv->wrbuf+priv->wrfilled);
+		priv->wrbuf + priv->wrfilled);
 	priv->wrfilled += count;
 
-	if( priv->wrfilled >= 3 ) {
+	if (priv->wrfilled >= 3) {
 		wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
 		dbg("%s - expected data: %d", __func__, wrexpected);
-	} else {
+	} else
 		wrexpected = sizeof(priv->wrbuf);
-	}
 
-	if( priv->wrfilled >= wrexpected ) {
+	if (priv->wrfilled >= wrexpected) {
 		/* We have enough data to begin transmission */
 		int length;
 
 		dbg("%s - transmitting data (frame 1)", __func__);
-		length = (wrexpected > port->bulk_out_size) ? port->bulk_out_size : wrexpected;
+		length = (wrexpected > port->bulk_out_size) ?
+					port->bulk_out_size : wrexpected;
 
-		memcpy (port->write_urb->transfer_buffer, priv->wrbuf, length );
-		priv->wrsent=length;
+		memcpy(port->write_urb->transfer_buffer, priv->wrbuf, length);
+		priv->wrsent = length;
 
 		/* set up our urb */
-		usb_fill_bulk_urb(port->write_urb, serial->dev, 
+		usb_fill_bulk_urb(port->write_urb, serial->dev,
 			      usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
 			      port->write_urb->transfer_buffer, length,
-			      ((serial->type->write_bulk_callback) ? 
-			       serial->type->write_bulk_callback : 
-			       cyberjack_write_bulk_callback), 
+			      ((serial->type->write_bulk_callback) ?
+			       serial->type->write_bulk_callback :
+			       cyberjack_write_bulk_callback),
 			      port);
 
 		/* send the data out the bulk port */
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed submitting write urb, error %d", __func__, result);
+			err("%s - failed submitting write urb, error %d",
+							__func__, result);
 			/* Throw away data. No better idea what to do with it. */
 			priv->wrfilled = 0;
 			priv->wrsent = 0;
@@ -283,12 +284,12 @@ static int cyberjack_write(struct tty_struct *tty,
 			return 0;
 		}
 
-		dbg("%s - priv->wrsent=%d", __func__,priv->wrsent);
-		dbg("%s - priv->wrfilled=%d", __func__,priv->wrfilled);
+		dbg("%s - priv->wrsent=%d", __func__, priv->wrsent);
+		dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled);
 
-		if( priv->wrsent>=priv->wrfilled ) {
+		if (priv->wrsent >= priv->wrfilled) {
 			dbg("%s - buffer cleaned", __func__);
-			memset( priv->wrbuf, 0, sizeof(priv->wrbuf) );
+			memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
 			priv->wrfilled = 0;
 			priv->wrsent = 0;
 		}
@@ -296,8 +297,8 @@ static int cyberjack_write(struct tty_struct *tty,
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return (count);
-} 
+	return count;
+}
 
 static int cyberjack_write_room(struct tty_struct *tty)
 {
@@ -319,10 +320,11 @@ static void cyberjack_read_int_callback(struct urb *urb)
 	if (status)
 		return;
 
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
 
 	/* React only to interrupts signaling a bulk_in transfer */
-	if( (urb->actual_length == 4) && (data[0] == 0x01) ) {
+	if (urb->actual_length == 4 && data[0] == 0x01) {
 		short old_rdtodo;
 
 		/* This is a announcement of coming bulk_ins. */
@@ -332,8 +334,8 @@ static void cyberjack_read_int_callback(struct urb *urb)
 
 		old_rdtodo = priv->rdtodo;
 
-		if( (old_rdtodo+size)<(old_rdtodo) ) {
-			dbg( "To many bulk_in urbs to do." );
+		if (old_rdtodo + size < old_rdtodo) {
+			dbg("To many bulk_in urbs to do.");
 			spin_unlock(&priv->lock);
 			goto resubmit;
 		}
@@ -345,10 +347,10 @@ static void cyberjack_read_int_callback(struct urb *urb)
 
 		spin_unlock(&priv->lock);
 
-		if( !old_rdtodo ) {
+		if (!old_rdtodo) {
 			port->read_urb->dev = port->serial->dev;
 			result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-			if( result )
+			if (result)
 				err("%s - failed resubmitting read urb, error %d", __func__, result);
 			dbg("%s - usb_submit_urb(read urb)", __func__);
 		}
@@ -374,7 +376,8 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
 	if (status) {
 		dbg("%s - nonzero read bulk status received: %d",
 		    __func__, status);
@@ -389,15 +392,16 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 	if (urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
-	  	tty_flip_buffer_push(tty);
+		tty_flip_buffer_push(tty);
 	}
 
 	spin_lock(&priv->lock);
 
 	/* Reduce urbs to do by one. */
-	priv->rdtodo-=urb->actual_length;
+	priv->rdtodo -= urb->actual_length;
 	/* Just to be sure */
-	if ( priv->rdtodo<0 ) priv->rdtodo = 0;
+	if (priv->rdtodo < 0)
+		priv->rdtodo = 0;
 	todo = priv->rdtodo;
 
 	spin_unlock(&priv->lock);
@@ -405,11 +409,12 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 	dbg("%s - rdtodo: %d", __func__, todo);
 
 	/* Continue to read if we have still urbs to do. */
-	if( todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/ ) {
+	if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) {
 		port->read_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
-			err("%s - failed resubmitting read urb, error %d", __func__, result);
+			err("%s - failed resubmitting read urb, error %d",
+				__func__, result);
 		dbg("%s - usb_submit_urb(read urb)", __func__);
 	}
 }
@@ -432,7 +437,7 @@ static void cyberjack_write_bulk_callback(struct urb *urb)
 	spin_lock(&priv->lock);
 
 	/* only do something if we have more data to send */
-	if( priv->wrfilled ) {
+	if (priv->wrfilled) {
 		int length, blksize, result;
 
 		dbg("%s - transmitting data (frame n)", __func__);
@@ -440,37 +445,39 @@ static void cyberjack_write_bulk_callback(struct urb *urb)
 		length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ?
 			port->bulk_out_size : (priv->wrfilled - priv->wrsent);
 
-		memcpy (port->write_urb->transfer_buffer, priv->wrbuf + priv->wrsent,
-			length );
-		priv->wrsent+=length;
+		memcpy(port->write_urb->transfer_buffer,
+					priv->wrbuf + priv->wrsent, length);
+		priv->wrsent += length;
 
 		/* set up our urb */
-		usb_fill_bulk_urb(port->write_urb, port->serial->dev, 
+		usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 			      usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress),
 			      port->write_urb->transfer_buffer, length,
-			      ((port->serial->type->write_bulk_callback) ? 
-			       port->serial->type->write_bulk_callback : 
-			       cyberjack_write_bulk_callback), 
+			      ((port->serial->type->write_bulk_callback) ?
+			       port->serial->type->write_bulk_callback :
+			       cyberjack_write_bulk_callback),
 			      port);
 
 		/* send the data out the bulk port */
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed submitting write urb, error %d", __func__, result);
+			err("%s - failed submitting write urb, error %d",
+								__func__, result);
 			/* Throw away data. No better idea what to do with it. */
 			priv->wrfilled = 0;
 			priv->wrsent = 0;
 			goto exit;
 		}
 
-		dbg("%s - priv->wrsent=%d", __func__,priv->wrsent);
-		dbg("%s - priv->wrfilled=%d", __func__,priv->wrfilled);
+		dbg("%s - priv->wrsent=%d", __func__, priv->wrsent);
+		dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled);
 
 		blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
 
-		if( (priv->wrsent>=priv->wrfilled) || (priv->wrsent>=blksize) ) {
+		if (priv->wrsent >= priv->wrfilled ||
+					priv->wrsent >= blksize) {
 			dbg("%s - buffer cleaned", __func__);
-			memset( priv->wrbuf, 0, sizeof(priv->wrbuf) );
+			memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
 			priv->wrfilled = 0;
 			priv->wrsent = 0;
 		}
@@ -481,14 +488,14 @@ exit:
 	usb_serial_port_softint(port);
 }
 
-static int __init cyberjack_init (void)
+static int __init cyberjack_init(void)
 {
 	int retval;
 	retval  = usb_serial_register(&cyberjack_device);
 	if (retval)
 		goto failed_usb_serial_register;
 	retval = usb_register(&cyberjack_driver);
-	if (retval) 
+	if (retval)
 		goto failed_usb_register;
 
 	info(DRIVER_VERSION " " DRIVER_AUTHOR);
@@ -501,18 +508,18 @@ failed_usb_serial_register:
 	return retval;
 }
 
-static void __exit cyberjack_exit (void)
+static void __exit cyberjack_exit(void)
 {
-	usb_deregister (&cyberjack_driver);
-	usb_serial_deregister (&cyberjack_device);
+	usb_deregister(&cyberjack_driver);
+	usb_serial_deregister(&cyberjack_device);
 }
 
 module_init(cyberjack_init);
 module_exit(cyberjack_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_VERSION( DRIVER_VERSION );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From 813a224fa5bff3e34309a6494e231d5ebfa0fb4e Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:10:36 +0100
Subject: cypress_m8: coding style

Coding style clean ups

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/cypress_m8.c | 617 +++++++++++++++++++++-------------------
 drivers/usb/serial/cypress_m8.h |   2 +-
 2 files changed, 325 insertions(+), 294 deletions(-)

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 6999d3372d8..bb9c7c45e98 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -2,7 +2,7 @@
  * USB Cypress M8 driver
  *
  * 	Copyright (C) 2004
- * 	    Lonnie Mendez (dignome@gmail.com) 
+ * 	    Lonnie Mendez (dignome@gmail.com)
  *	Copyright (C) 2003,2004
  *	    Neil Whelchel (koyama@firstlight.net)
  *
@@ -11,19 +11,21 @@
  * 	the Free Software Foundation; either version 2 of the License, or
  * 	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  * See http://geocities.com/i0xox0i for information on this driver and the
  * earthmate usb device.
  *
  *  Lonnie Mendez <dignome@gmail.com>
  *  4-29-2005
- *	Fixed problem where setting or retreiving the serial config would fail with
- * 	EPIPE.  Removed CRTS toggling so the driver behaves more like other usbserial
- * 	adapters.  Issued new interval of 1ms instead of the default 10ms.  As a
- * 	result, transfer speed has been substantially increased.  From avg. 850bps to
- * 	avg. 3300bps.  initial termios has also been modified.  Cleaned up code and
- * 	formatting issues so it is more readable.  Replaced the C++ style comments.
+ *	Fixed problem where setting or retreiving the serial config would fail
+ *	with EPIPE.  Removed CRTS toggling so the driver behaves more like
+ *	other usbserial adapters.  Issued new interval of 1ms instead of the
+ *	default 10ms.  As a result, transfer speed has been substantially
+ *	increased from avg. 850bps to avg. 3300bps.  initial termios has also
+ *	been modified.  Cleaned up code and formatting issues so it is more
+ *	readable.  Replaced the C++ style comments.
  *
  *  Lonnie Mendez <dignome@gmail.com>
  *  12-15-2004
@@ -42,10 +44,11 @@
  *
  */
 
-/* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
+/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
+   for linux. */
 /* Thanks to cypress for providing references for the hid reports. */
 /* Thanks to Jiang Zhang for providing links and for general help. */
-/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
+/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
 
 
 #include <linux/kernel.h>
@@ -62,7 +65,7 @@
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #include "cypress_m8.h"
 
@@ -112,7 +115,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ }						/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver cypress_driver = {
 	.name =		"cypress",
@@ -146,11 +149,13 @@ struct cypress_private {
 	__u8 rx_flags;			   /* throttling - used from whiteheat/ftdi_sio */
 	enum packet_format pkt_fmt;	   /* format to use for packet send / receive */
 	int get_cfg_unsafe;		   /* If true, the CYPRESS_GET_CONFIG is unsafe */
-	int baud_rate;			   /* stores current baud rate in integer form */
+	int baud_rate;			   /* stores current baud rate in
+					      integer form */
 	int isthrottled;		   /* if throttled, discard reads */
 	wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 	char prev_status, diff_status;	   /* used for TIOCMIWAIT */
-	/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
+	/* we pass a pointer to this as the arguement sent to
+	   cypress_set_termios old_termios */
 	struct ktermios tmp_termios; 	   /* stores the old termios settings */
 };
 
@@ -163,33 +168,41 @@ struct cypress_buf {
 };
 
 /* function prototypes for the Cypress USB to serial device */
-static int  cypress_earthmate_startup	(struct usb_serial *serial);
-static int  cypress_hidcom_startup	(struct usb_serial *serial);
-static int  cypress_ca42v2_startup	(struct usb_serial *serial);
-static void cypress_shutdown		(struct usb_serial *serial);
-static int  cypress_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void cypress_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int  cypress_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static void cypress_send		(struct usb_serial_port *port);
-static int  cypress_write_room		(struct tty_struct *tty);
-static int  cypress_ioctl		(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-static void cypress_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
-static int  cypress_tiocmget		(struct tty_struct *tty, struct file *file);
-static int  cypress_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
-static int  cypress_chars_in_buffer	(struct tty_struct *tty);
-static void cypress_throttle		(struct tty_struct *tty);
-static void cypress_unthrottle		(struct tty_struct *tty);
-static void cypress_set_dead		(struct usb_serial_port *port);
-static void cypress_read_int_callback	(struct urb *urb);
-static void cypress_write_int_callback	(struct urb *urb);
+static int  cypress_earthmate_startup(struct usb_serial *serial);
+static int  cypress_hidcom_startup(struct usb_serial *serial);
+static int  cypress_ca42v2_startup(struct usb_serial *serial);
+static void cypress_shutdown(struct usb_serial *serial);
+static int  cypress_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void cypress_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+static void cypress_send(struct usb_serial_port *port);
+static int  cypress_write_room(struct tty_struct *tty);
+static int  cypress_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg);
+static void cypress_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static int  cypress_tiocmget(struct tty_struct *tty, struct file *file);
+static int  cypress_tiocmset(struct tty_struct *tty, struct file *file,
+			unsigned int set, unsigned int clear);
+static int  cypress_chars_in_buffer(struct tty_struct *tty);
+static void cypress_throttle(struct tty_struct *tty);
+static void cypress_unthrottle(struct tty_struct *tty);
+static void cypress_set_dead(struct usb_serial_port *port);
+static void cypress_read_int_callback(struct urb *urb);
+static void cypress_write_int_callback(struct urb *urb);
 /* write buffer functions */
 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
-static void 		  cypress_buf_free(struct cypress_buf *cb);
-static void		  cypress_buf_clear(struct cypress_buf *cb);
-static unsigned int	  cypress_buf_data_avail(struct cypress_buf *cb);
-static unsigned int	  cypress_buf_space_avail(struct cypress_buf *cb);
-static unsigned int	  cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
-static unsigned int	  cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
+static void cypress_buf_free(struct cypress_buf *cb);
+static void cypress_buf_clear(struct cypress_buf *cb);
+static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
+static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
+static unsigned int cypress_buf_put(struct cypress_buf *cb,
+					const char *buf, unsigned int count);
+static unsigned int cypress_buf_get(struct cypress_buf *cb,
+					char *buf, unsigned int count);
 
 
 static struct usb_serial_driver cypress_earthmate_device = {
@@ -247,7 +260,7 @@ static struct usb_serial_driver cypress_hidcom_device = {
 static struct usb_serial_driver cypress_ca42v2_device = {
 	.driver = {
 		.owner =		THIS_MODULE,
-                .name =			"nokiaca42v2",
+		.name =			"nokiaca42v2",
 	},
 	.description =			"Nokia CA-42 V2 Adapter",
 	.usb_driver = 			&cypress_driver,
@@ -322,7 +335,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 
 
 /* This function can either set or retrieve the current serial line settings */
-static int cypress_serial_control (struct tty_struct *tty,
+static int cypress_serial_control(struct tty_struct *tty,
 	struct usb_serial_port *port, speed_t baud_rate, int data_bits,
 	int stop_bits, int parity_enable, int parity_type, int reset,
 	int cypress_request_type)
@@ -333,111 +346,114 @@ static int cypress_serial_control (struct tty_struct *tty,
 	unsigned long flags;
 
 	dbg("%s", __func__);
-	
+
 	priv = usb_get_serial_port_data(port);
 
 	if (!priv->comm_is_ok)
 		return -ENODEV;
 
-	switch(cypress_request_type) {
-		case CYPRESS_SET_CONFIG:
+	switch (cypress_request_type) {
+	case CYPRESS_SET_CONFIG:
+		new_baudrate = priv->baud_rate;
+		/* 0 means 'Hang up' so doesn't change the true bit rate */
+		if (baud_rate == 0)
 			new_baudrate = priv->baud_rate;
-			/* 0 means 'Hang up' so doesn't change the true bit rate */
-			if (baud_rate == 0)
-				new_baudrate = priv->baud_rate;
-			/* Change of speed ? */
-			else if (baud_rate != priv->baud_rate) {
-				dbg("%s - baud rate is changing", __func__);
-				retval = analyze_baud_rate(port, baud_rate);
-				if (retval >=  0) {
-					new_baudrate = retval;
-					dbg("%s - New baud rate set to %d",
-					    __func__, new_baudrate);
-				}
-			}
-			dbg("%s - baud rate is being sent as %d", __func__, new_baudrate);
-			
-			memset(feature_buffer, 0, sizeof(feature_buffer));
-			/* fill the feature_buffer with new configuration */
-			*((u_int32_t *)feature_buffer) = new_baudrate;
-
-			feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
-			/* 1 bit gap */
-			feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
-			feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
-			feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
-			/* 1 bit gap */
-			feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
-				
-			dbg("%s - device is being sent this feature report:", __func__);
-			dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, feature_buffer[0], feature_buffer[1],
-		            feature_buffer[2], feature_buffer[3], feature_buffer[4]);
-			
-			do {
-				retval = usb_control_msg(port->serial->dev,
-						usb_sndctrlpipe(port->serial->dev, 0),
-						HID_REQ_SET_REPORT,
-						USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
-						0x0300, 0, feature_buffer,
-						sizeof(feature_buffer), 500);
-
-				if (tries++ >= 3)
-					break;
-
-			} while (retval != sizeof(feature_buffer) &&
-				 retval != -ENODEV);
-
-			if (retval != sizeof(feature_buffer)) {
-				err("%s - failed sending serial line settings - %d", __func__, retval);
-				cypress_set_dead(port);
-			} else {
-				spin_lock_irqsave(&priv->lock, flags);
-				priv->baud_rate = new_baudrate;
-				priv->current_config = feature_buffer[4];
-				spin_unlock_irqrestore(&priv->lock, flags);
-				/* If we asked for a speed change encode it */
-				if (baud_rate)
-					tty_encode_baud_rate(tty,
-							new_baudrate, new_baudrate);
-			}
-		break;
-		case CYPRESS_GET_CONFIG:
-			if (priv->get_cfg_unsafe) {
-				/* Not implemented for this device,
-				   and if we try to do it we're likely
-				   to crash the hardware. */
-				return -ENOTTY;
-			}
-			dbg("%s - retreiving serial line settings", __func__);
-			/* set initial values in feature buffer */
-			memset(feature_buffer, 0, sizeof(feature_buffer));
-
-			do {
-				retval = usb_control_msg(port->serial->dev,
-						usb_rcvctrlpipe(port->serial->dev, 0),
-						HID_REQ_GET_REPORT,
-						USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
-						0x0300, 0, feature_buffer,
-						sizeof(feature_buffer), 500);
-
-				if (tries++ >= 3)
-					break;
-
-			} while (retval != sizeof(feature_buffer) &&
-				 retval != -ENODEV);
-
-			if (retval != sizeof(feature_buffer)) {
-				err("%s - failed to retrieve serial line settings - %d", __func__, retval);
-				cypress_set_dead(port);
-				return retval;
-			} else {
-				spin_lock_irqsave(&priv->lock, flags);
-
-				/* store the config in one byte, and later use bit masks to check values */
-				priv->current_config = feature_buffer[4];
-				priv->baud_rate = *((u_int32_t *)feature_buffer);
-				spin_unlock_irqrestore(&priv->lock, flags);
+		/* Change of speed ? */
+		else if (baud_rate != priv->baud_rate) {
+			dbg("%s - baud rate is changing", __func__);
+			retval = analyze_baud_rate(port, baud_rate);
+			if (retval >=  0) {
+				new_baudrate = retval;
+				dbg("%s - New baud rate set to %d",
+				    __func__, new_baudrate);
 			}
+		}
+		dbg("%s - baud rate is being sent as %d",
+					__func__, new_baudrate);
+
+		memset(feature_buffer, 0, sizeof(feature_buffer));
+		/* fill the feature_buffer with new configuration */
+		*((u_int32_t *)feature_buffer) = new_baudrate;
+		feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
+		/* 1 bit gap */
+		feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
+		feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
+		feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
+		/* 1 bit gap */
+		feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
+
+		dbg("%s - device is being sent this feature report:",
+								__func__);
+		dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__,
+			feature_buffer[0], feature_buffer[1],
+			feature_buffer[2], feature_buffer[3],
+			feature_buffer[4]);
+
+		do {
+			retval = usb_control_msg(port->serial->dev,
+					usb_sndctrlpipe(port->serial->dev, 0),
+					HID_REQ_SET_REPORT,
+					USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
+					0x0300, 0, feature_buffer,
+					sizeof(feature_buffer), 500);
+
+			if (tries++ >= 3)
+				break;
+
+		} while (retval != sizeof(feature_buffer) &&
+			 retval != -ENODEV);
+
+		if (retval != sizeof(feature_buffer)) {
+			err("%s - failed sending serial line settings - %d",
+							__func__, retval);
+			cypress_set_dead(port);
+		} else {
+			spin_lock_irqsave(&priv->lock, flags);
+			priv->baud_rate = new_baudrate;
+			priv->current_config = feature_buffer[4];
+			spin_unlock_irqrestore(&priv->lock, flags);
+			/* If we asked for a speed change encode it */
+			if (baud_rate)
+				tty_encode_baud_rate(tty,
+					new_baudrate, new_baudrate);
+		}
+	break;
+	case CYPRESS_GET_CONFIG:
+		if (priv->get_cfg_unsafe) {
+			/* Not implemented for this device,
+			   and if we try to do it we're likely
+			   to crash the hardware. */
+			return -ENOTTY;
+		}
+		dbg("%s - retreiving serial line settings", __func__);
+		/* set initial values in feature buffer */
+		memset(feature_buffer, 0, sizeof(feature_buffer));
+
+		do {
+			retval = usb_control_msg(port->serial->dev,
+					usb_rcvctrlpipe(port->serial->dev, 0),
+					HID_REQ_GET_REPORT,
+					USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
+					0x0300, 0, feature_buffer,
+					sizeof(feature_buffer), 500);
+
+			if (tries++ >= 3)
+				break;
+		} while (retval != sizeof(feature_buffer)
+						&& retval != -ENODEV);
+
+		if (retval != sizeof(feature_buffer)) {
+			err("%s - failed to retrieve serial line settings - %d", __func__, retval);
+			cypress_set_dead(port);
+			return retval;
+		} else {
+			spin_lock_irqsave(&priv->lock, flags);
+			/* store the config in one byte, and later
+			   use bit masks to check values */
+			priv->current_config = feature_buffer[4];
+			priv->baud_rate = *((u_int32_t *)feature_buffer);
+			spin_unlock_irqrestore(&priv->lock, flags);
+		}
 	}
 	spin_lock_irqsave(&priv->lock, flags);
 	++priv->cmd_count;
@@ -470,14 +486,14 @@ static void cypress_set_dead(struct usb_serial_port *port)
  *****************************************************************************/
 
 
-static int generic_startup (struct usb_serial *serial)
+static int generic_startup(struct usb_serial *serial)
 {
 	struct cypress_private *priv;
 	struct usb_serial_port *port = serial->port[0];
 
 	dbg("%s - port %d", __func__, port->number);
 
-	priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
+	priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
@@ -489,9 +505,9 @@ static int generic_startup (struct usb_serial *serial)
 		return -ENOMEM;
 	}
 	init_waitqueue_head(&priv->delta_msr_wait);
-	
-	usb_reset_configuration (serial->dev);
-	
+
+	usb_reset_configuration(serial->dev);
+
 	priv->cmd_ctrl = 0;
 	priv->line_control = 0;
 	priv->termios_initialized = 0;
@@ -502,30 +518,30 @@ static int generic_startup (struct usb_serial *serial)
 	   small.  Otherwise we can use the slightly more compact
 	   format.  This is in accordance with the cypress_m8 serial
 	   converter app note. */
-	if (port->interrupt_out_size > 9) {
+	if (port->interrupt_out_size > 9)
 		priv->pkt_fmt = packet_format_1;
-	} else {
+	else
 		priv->pkt_fmt = packet_format_2;
-	}
+
 	if (interval > 0) {
 		priv->write_urb_interval = interval;
 		priv->read_urb_interval = interval;
 		dbg("%s - port %d read & write intervals forced to %d",
-		    __func__,port->number,interval);
+		    __func__, port->number, interval);
 	} else {
 		priv->write_urb_interval = port->interrupt_out_urb->interval;
 		priv->read_urb_interval = port->interrupt_in_urb->interval;
 		dbg("%s - port %d intervals: read=%d write=%d",
-		    __func__,port->number,
-		    priv->read_urb_interval,priv->write_urb_interval);
+		    __func__, port->number,
+		    priv->read_urb_interval, priv->write_urb_interval);
 	}
 	usb_set_serial_port_data(port, priv);
-	
+
 	return 0;
 }
 
 
-static int cypress_earthmate_startup (struct usb_serial *serial)
+static int cypress_earthmate_startup(struct usb_serial *serial)
 {
 	struct cypress_private *priv;
 	struct usb_serial_port *port = serial->port[0];
@@ -543,7 +559,8 @@ static int cypress_earthmate_startup (struct usb_serial *serial)
 	/* All Earthmate devices use the separated-count packet
 	   format!  Idiotic. */
 	priv->pkt_fmt = packet_format_1;
-	if (serial->dev->descriptor.idProduct != cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
+	if (serial->dev->descriptor.idProduct !=
+				cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
 		/* The old original USB Earthmate seemed able to
 		   handle GET_CONFIG requests; everything they've
 		   produced since that time crashes if this command is
@@ -557,7 +574,7 @@ static int cypress_earthmate_startup (struct usb_serial *serial)
 } /* cypress_earthmate_startup */
 
 
-static int cypress_hidcom_startup (struct usb_serial *serial)
+static int cypress_hidcom_startup(struct usb_serial *serial)
 {
 	struct cypress_private *priv;
 
@@ -571,12 +588,12 @@ static int cypress_hidcom_startup (struct usb_serial *serial)
 
 	priv = usb_get_serial_port_data(serial->port[0]);
 	priv->chiptype = CT_CYPHIDCOM;
-	
+
 	return 0;
 } /* cypress_hidcom_startup */
 
 
-static int cypress_ca42v2_startup (struct usb_serial *serial)
+static int cypress_ca42v2_startup(struct usb_serial *serial)
 {
 	struct cypress_private *priv;
 
@@ -595,11 +612,11 @@ static int cypress_ca42v2_startup (struct usb_serial *serial)
 } /* cypress_ca42v2_startup */
 
 
-static void cypress_shutdown (struct usb_serial *serial)
+static void cypress_shutdown(struct usb_serial *serial)
 {
 	struct cypress_private *priv;
 
-	dbg ("%s - port %d", __func__, serial->port[0]->number);
+	dbg("%s - port %d", __func__, serial->port[0]->number);
 
 	/* all open ports are closed at this point */
 
@@ -650,7 +667,9 @@ static int cypress_open(struct tty_struct *tty,
 	result = cypress_write(tty, port, NULL, 0);
 
 	if (result) {
-		dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __func__, result);
+		dev_err(&port->dev,
+			"%s - failed setting the control lines - error %d\n",
+							__func__, result);
 		return result;
 	} else
 		dbg("%s - success setting the control lines", __func__);
@@ -659,19 +678,22 @@ static int cypress_open(struct tty_struct *tty,
 		cypress_set_termios(tty, port, &priv->tmp_termios);
 
 	/* setup the port and start reading from the device */
-	if(!port->interrupt_in_urb){
+	if (!port->interrupt_in_urb) {
 		err("%s - interrupt_in_urb is empty!", __func__);
-		return(-1);
+		return -1;
 	}
 
 	usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 		usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
-		port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
+		port->interrupt_in_urb->transfer_buffer,
+		port->interrupt_in_urb->transfer_buffer_length,
 		cypress_read_int_callback, port, priv->read_urb_interval);
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 
-	if (result){
-		dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
+	if (result) {
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
 		cypress_set_dead(port);
 	}
 
@@ -680,7 +702,7 @@ static int cypress_open(struct tty_struct *tty,
 
 
 static void cypress_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned int c_cflag;
@@ -722,15 +744,15 @@ static void cypress_close(struct tty_struct *tty,
 	if (tty) {
 		bps = tty_get_baud_rate(tty);
 		if (bps > 1200)
-			timeout = max((HZ*2560)/bps,HZ/10);
+			timeout = max((HZ * 2560) / bps, HZ / 10);
 		else
-			timeout = 2*HZ;
+			timeout = 2 * HZ;
 		schedule_timeout_interruptible(timeout);
 	}
 
 	dbg("%s - stopping urbs", __func__);
-	usb_kill_urb (port->interrupt_in_urb);
-	usb_kill_urb (port->interrupt_out_urb);
+	usb_kill_urb(port->interrupt_in_urb);
+	usb_kill_urb(port->interrupt_out_urb);
 
 	if (tty) {
 		c_cflag = tty->termios->c_cflag;
@@ -746,8 +768,8 @@ static void cypress_close(struct tty_struct *tty,
 	}
 
 	if (stats)
-		dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
-		          priv->bytes_in, priv->bytes_out, priv->cmd_count);
+		dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
+			priv->bytes_in, priv->bytes_out, priv->cmd_count);
 	mutex_unlock(&port->serial->disc_mutex);
 } /* cypress_close */
 
@@ -757,7 +779,7 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	
+
 	dbg("%s - port %d, %d bytes", __func__, port->number, count);
 
 	/* line control commands, which need to be executed immediately,
@@ -767,10 +789,10 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 		count = 0;
 		goto finish;
 	}
-	
+
 	if (!count)
 		return count;
-	
+
 	spin_lock_irqsave(&priv->lock, flags);
 	count = cypress_buf_put(priv->buf, buf, count);
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -787,13 +809,14 @@ static void cypress_send(struct usb_serial_port *port)
 	int count = 0, result, offset, actual_size;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	
+
 	if (!priv->comm_is_ok)
 		return;
 
 	dbg("%s - port %d", __func__, port->number);
-	dbg("%s - interrupt out size is %d", __func__, port->interrupt_out_size);
-	
+	dbg("%s - interrupt out size is %d", __func__,
+						port->interrupt_out_size);
+
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->write_urb_in_use) {
 		dbg("%s - can't write, urb in use", __func__);
@@ -803,7 +826,8 @@ static void cypress_send(struct usb_serial_port *port)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* clear buffer */
-	memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);
+	memset(port->interrupt_out_urb->transfer_buffer, 0,
+						port->interrupt_out_size);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	switch (priv->pkt_fmt) {
@@ -834,9 +858,8 @@ static void cypress_send(struct usb_serial_port *port)
 	count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
 				port->interrupt_out_size-offset);
 
-	if (count == 0) {
+	if (count == 0)
 		return;
-	}
 
 	switch (priv->pkt_fmt) {
 	default:
@@ -860,26 +883,29 @@ send:
 		actual_size = count +
 			      (priv->pkt_fmt == packet_format_1 ? 2 : 1);
 
-	usb_serial_debug_data(debug, &port->dev, __func__, port->interrupt_out_size,
-			      port->interrupt_out_urb->transfer_buffer);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+		port->interrupt_out_size,
+		port->interrupt_out_urb->transfer_buffer);
 
 	usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
 		usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
 		port->interrupt_out_buffer, port->interrupt_out_size,
 		cypress_write_int_callback, port, priv->write_urb_interval);
-	result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__,
-			result);
+		dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d\n",
+							__func__, result);
 		priv->write_urb_in_use = 0;
 		cypress_set_dead(port);
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->cmd_ctrl) {
+	if (priv->cmd_ctrl)
 		priv->cmd_ctrl = 0;
-	}
-	priv->bytes_out += count; /* do not count the line control and size bytes */
+
+	/* do not count the line control and size bytes */
+	priv->bytes_out += count;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	usb_serial_port_softint(port);
@@ -912,7 +938,7 @@ static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
 	__u8 status, control;
 	unsigned int result = 0;
 	unsigned long flags;
-	
+
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -939,7 +965,7 @@ static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
 	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	
+
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -958,7 +984,7 @@ static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 
-static int cypress_ioctl(struct tty_struct *tty, struct file * file,
+static int cypress_ioctl(struct tty_struct *tty, struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -967,38 +993,37 @@ static int cypress_ioctl(struct tty_struct *tty, struct file * file,
 	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 
 	switch (cmd) {
-		/* This code comes from drivers/char/serial.c and ftdi_sio.c */
-		case TIOCMIWAIT:
-			while (priv != NULL) {
-				interruptible_sleep_on(&priv->delta_msr_wait);
-				/* see if a signal did it */
-				if (signal_pending(current))
-					return -ERESTARTSYS;
-				else {
-					char diff = priv->diff_status;
-
-					if (diff == 0) {
-						return -EIO; /* no change => error */
-					}
-					
-					/* consume all events */
-					priv->diff_status = 0;
-
-					/* return 0 if caller wanted to know about these bits */
-					if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
-					     ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
-					     ((arg & TIOCM_CD) && (diff & UART_CD)) ||
-					     ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
-						return 0;
-					}
-					/* otherwise caller can't care less about what happened,
-					 * and so we continue to wait for more events.
-					 */
-				}
+	/* This code comes from drivers/char/serial.c and ftdi_sio.c */
+	case TIOCMIWAIT:
+		while (priv != NULL) {
+			interruptible_sleep_on(&priv->delta_msr_wait);
+			/* see if a signal did it */
+			if (signal_pending(current))
+				return -ERESTARTSYS;
+			else {
+				char diff = priv->diff_status;
+				if (diff == 0)
+					return -EIO; /* no change => error */
+
+				/* consume all events */
+				priv->diff_status = 0;
+
+				/* return 0 if caller wanted to know about
+				   these bits */
+				if (((arg & TIOCM_RNG) && (diff & UART_RI)) ||
+				    ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
+				    ((arg & TIOCM_CD) && (diff & UART_CD)) ||
+				    ((arg & TIOCM_CTS) && (diff & UART_CTS)))
+					return 0;
+				/* otherwise caller can't care less about what
+				 * happened, and so we continue to wait for
+				 * more events.
+				 */
 			}
-			return 0;
-		default:
-			break;
+		}
+		return 0;
+	default:
+		break;
 	}
 	dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
 	return -ENOIOCTLCMD;
@@ -1070,23 +1095,22 @@ static void cypress_set_termios(struct tty_struct *tty,
 
 	if (cflag & CSIZE) {
 		switch (cflag & CSIZE) {
-			case CS5:
-				data_bits = 0;
-				break;
-			case CS6:
-				data_bits = 1;
-				break;
-			case CS7:
-				data_bits = 2;
-				break;
-			case CS8:
-				data_bits = 3;
-				break;
-			default:
-				err("%s - CSIZE was set, but not CS5-CS8",
-						__func__);
-				data_bits = 3;
-		}
+		case CS5:
+			data_bits = 0;
+			break;
+		case CS6:
+			data_bits = 1;
+			break;
+		case CS7:
+			data_bits = 2;
+			break;
+		case CS8:
+			data_bits = 3;
+			break;
+		default:
+			err("%s - CSIZE was set, but not CS5-CS8",
+					__func__);
+			data_bits = 3;
 	} else
 		data_bits = 3;
 
@@ -1104,8 +1128,10 @@ static void cypress_set_termios(struct tty_struct *tty,
 			"%d data_bits (+5)", __func__, stop_bits,
 			parity_enable, parity_type, data_bits);
 
-	cypress_serial_control(tty, port, tty_get_baud_rate(tty), data_bits, stop_bits,
-			parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
+	cypress_serial_control(tty, port, tty_get_baud_rate(tty),
+			data_bits, stop_bits,
+			parity_enable, parity_type,
+			0, CYPRESS_SET_CONFIG);
 
 	/* we perform a CYPRESS_GET_CONFIG so that the current settings are
 	 * filled into the private structure this should confirm that all is
@@ -1116,7 +1142,7 @@ static void cypress_set_termios(struct tty_struct *tty,
 	 * termios flag base comes from empeg.c */
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
+	if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
 		dbg("Using custom termios settings for a baud rate of "
 				"4800bps.");
 		/* define custom termios settings for NMEA protocol */
@@ -1164,7 +1190,7 @@ static int cypress_chars_in_buffer(struct tty_struct *tty)
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
-	
+
 	spin_lock_irqsave(&priv->lock, flags);
 	chars = cypress_buf_data_avail(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -1243,12 +1269,13 @@ static void cypress_read_int_callback(struct urb *urb)
 		/* precursor to disconnect so just go away */
 		return;
 	case -EPIPE:
-		usb_clear_halt(port->serial->dev,0x81);
+		usb_clear_halt(port->serial->dev, 0x81);
 		break;
 	default:
 		/* something ugly is going on... */
-		dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
-			__func__, status);
+		dev_err(&urb->dev->dev,
+			"%s - unexpected nonzero read status received: %d\n",
+							__func__, status);
 		cypress_set_dead(port);
 		return;
 	}
@@ -1296,8 +1323,8 @@ static void cypress_read_int_callback(struct urb *urb)
 		goto continue_read;
 	}
 
-	usb_serial_debug_data (debug, &port->dev, __func__,
-			urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	/* check to see if status has changed */
@@ -1356,7 +1383,8 @@ continue_read:
 					port->interrupt_in_endpointAddress),
 				port->interrupt_in_urb->transfer_buffer,
 				port->interrupt_in_urb->transfer_buffer_length,
-				cypress_read_int_callback, port, priv->read_urb_interval);
+				cypress_read_int_callback, port,
+				priv->read_urb_interval);
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 		if (result) {
 			dev_err(&urb->dev->dev, "%s - failed resubmitting "
@@ -1380,42 +1408,43 @@ static void cypress_write_int_callback(struct urb *urb)
 	dbg("%s - port %d", __func__, port->number);
 
 	switch (status) {
-		case 0:
-			/* success */
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+						__func__, status);
+		priv->write_urb_in_use = 0;
+		return;
+	case -EPIPE: /* no break needed; clear halt and resubmit */
+		if (!priv->comm_is_ok)
 			break;
-		case -ECONNRESET:
-		case -ENOENT:
-		case -ESHUTDOWN:
-			/* this urb is terminated, clean up */
-			dbg("%s - urb shutting down with status: %d",
-			    __func__, status);
-			priv->write_urb_in_use = 0;
+		usb_clear_halt(port->serial->dev, 0x02);
+		/* error in the urb, so we have to resubmit it */
+		dbg("%s - nonzero write bulk status received: %d",
+			__func__, status);
+		port->interrupt_out_urb->transfer_buffer_length = 1;
+		port->interrupt_out_urb->dev = port->serial->dev;
+		result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
+		if (!result)
 			return;
-		case -EPIPE: /* no break needed; clear halt and resubmit */
-			if (!priv->comm_is_ok)
-				break;
-			usb_clear_halt(port->serial->dev, 0x02);
-			/* error in the urb, so we have to resubmit it */
-			dbg("%s - nonzero write bulk status received: %d",
-			    __func__, status);
-			port->interrupt_out_urb->transfer_buffer_length = 1;
-			port->interrupt_out_urb->dev = port->serial->dev;
-			result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
-			if (!result)
-				return;
-			dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
-				__func__, result);
-			cypress_set_dead(port);
-			break;
-		default:
-			dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
-				__func__, status);
-			cypress_set_dead(port);
-			break;
+		dev_err(&urb->dev->dev,
+			"%s - failed resubmitting write urb, error %d\n",
+							__func__, result);
+		cypress_set_dead(port);
+		break;
+	default:
+		dev_err(&urb->dev->dev,
+			 "%s - unexpected nonzero write status received: %d\n",
+							__func__, status);
+		cypress_set_dead(port);
+		break;
 	}
-	
 	priv->write_urb_in_use = 0;
-	
+
 	/* send any buffered data */
 	cypress_send(port);
 }
@@ -1497,7 +1526,8 @@ static void cypress_buf_clear(struct cypress_buf *cb)
 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
 {
 	if (cb != NULL)
-		return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
+		return (cb->buf_size + cb->buf_put - cb->buf_get)
+							% cb->buf_size;
 	else
 		return 0;
 }
@@ -1513,7 +1543,8 @@ static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
 {
 	if (cb != NULL)
-		return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
+		return (cb->buf_size + cb->buf_get - cb->buf_put - 1)
+							% cb->buf_size;
 	else
 		return 0;
 }
@@ -1613,9 +1644,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
 static int __init cypress_init(void)
 {
 	int retval;
-	
+
 	dbg("%s", __func__);
-	
+
 	retval = usb_serial_register(&cypress_earthmate_device);
 	if (retval)
 		goto failed_em_register;
@@ -1643,23 +1674,23 @@ failed_em_register:
 }
 
 
-static void __exit cypress_exit (void)
+static void __exit cypress_exit(void)
 {
 	dbg("%s", __func__);
 
-	usb_deregister (&cypress_driver);
-	usb_serial_deregister (&cypress_earthmate_device);
-	usb_serial_deregister (&cypress_hidcom_device);
-	usb_serial_deregister (&cypress_ca42v2_device);
+	usb_deregister(&cypress_driver);
+	usb_serial_deregister(&cypress_earthmate_device);
+	usb_serial_deregister(&cypress_hidcom_device);
+	usb_serial_deregister(&cypress_ca42v2_device);
 }
 
 
 module_init(cypress_init);
 module_exit(cypress_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_VERSION( DRIVER_VERSION );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 0388065bb79..e772b01ac3a 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -54,7 +54,7 @@
 #define UART_DSR	0x20	/* data set ready - flow control - device to host */
 #define CONTROL_RTS 	0x10	/* request to send - flow control - host to device */
 #define UART_CTS	0x10	/* clear to send - flow control - device to host */
-#define	UART_RI		0x10	/* ring indicator - modem - device to host */ 
+#define	UART_RI		0x10	/* ring indicator - modem - device to host */
 #define UART_CD		0x40	/* carrier detect - modem - device to host */
 #define CYP_ERROR 	0x08	/* received from input report - device to host */
 /* Note - the below has nothing to to with the "feature report" reset */
-- 
cgit v1.2.3


From 77336828c01933d37102c4bef6e2a2cf7e3243b3 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:10:53 +0100
Subject: usb-cypress: There is no 0 case to go with CS5/6/7/8 so remove the
 test

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/cypress_m8.c | 37 +++++++++++++++++--------------------
 1 file changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index bb9c7c45e98..22837a3f2f8 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1093,27 +1093,24 @@ static void cypress_set_termios(struct tty_struct *tty,
 	} else
 		parity_enable = parity_type = 0;
 
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS5:
-			data_bits = 0;
-			break;
-		case CS6:
-			data_bits = 1;
-			break;
-		case CS7:
-			data_bits = 2;
-			break;
-		case CS8:
-			data_bits = 3;
-			break;
-		default:
-			err("%s - CSIZE was set, but not CS5-CS8",
-					__func__);
-			data_bits = 3;
-	} else
+	switch (cflag & CSIZE) {
+	case CS5:
+		data_bits = 0;
+		break;
+	case CS6:
+		data_bits = 1;
+		break;
+	case CS7:
+		data_bits = 2;
+		break;
+	case CS8:
 		data_bits = 3;
-
+		break;
+	default:
+		err("%s - CSIZE was set, but not CS5-CS8",
+				__func__);
+		data_bits = 3;
+	}
 	spin_lock_irqsave(&priv->lock, flags);
 	oldlines = priv->line_control;
 	if ((cflag & CBAUD) == B0) {
-- 
cgit v1.2.3


From 41ad427da1f9303e2e34811398b31c999c3d39d1 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:11:02 +0100
Subject: digi_acceleport: coding style

Code tidy

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/digi_acceleport.c | 344 +++++++++++++++++++----------------
 1 file changed, 184 insertions(+), 160 deletions(-)

diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index dc92dbfc962..240aad1acaa 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -241,7 +241,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
 #include <linux/usb/serial.h>
@@ -441,8 +441,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 	unsigned int modem_signals, int interruptible);
 static int digi_transmit_idle(struct usb_serial_port *port,
 	unsigned long timeout);
-static void digi_rx_throttle (struct tty_struct *tty);
-static void digi_rx_unthrottle (struct tty_struct *tty);
+static void digi_rx_throttle(struct tty_struct *tty);
+static void digi_rx_unthrottle(struct tty_struct *tty);
 static void digi_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
 static void digi_break_ctl(struct tty_struct *tty, int break_state);
@@ -486,7 +486,7 @@ static struct usb_device_id id_table_4 [] = {
 	{ }						/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver digi_driver = {
 	.name =		"digi_acceleport",
@@ -555,17 +555,17 @@ static struct usb_serial_driver digi_acceleport_4_device = {
 /* Functions */
 
 /*
-*  Cond Wait Interruptible Timeout Irqrestore
-*
-*  Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
-*  so that wake ups are not lost if they occur between the unlock
-*  and the sleep.  In other words, spin_unlock_irqrestore and
-*  interruptible_sleep_on_timeout are "atomic" with respect to
-*  wake ups.  This is used to implement condition variables.
-*
-*  interruptible_sleep_on_timeout is deprecated and has been replaced
-*  with the equivalent code.
-*/
+ *  Cond Wait Interruptible Timeout Irqrestore
+ *
+ *  Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
+ *  so that wake ups are not lost if they occur between the unlock
+ *  and the sleep.  In other words, spin_unlock_irqrestore and
+ *  interruptible_sleep_on_timeout are "atomic" with respect to
+ *  wake ups.  This is used to implement condition variables.
+ *
+ *  interruptible_sleep_on_timeout is deprecated and has been replaced
+ *  with the equivalent code.
+ */
 
 static long cond_wait_interruptible_timeout_irqrestore(
 	wait_queue_head_t *q, long timeout,
@@ -584,15 +584,16 @@ __releases(lock)
 
 
 /*
-*  Digi Wakeup Write
-*
-*  Wake up port, line discipline, and tty processes sleeping
-*  on writes.
-*/
+ *  Digi Wakeup Write
+ *
+ *  Wake up port, line discipline, and tty processes sleeping
+ *  on writes.
+ */
 
 static void digi_wakeup_write_lock(struct work_struct *work)
 {
-	struct digi_port *priv = container_of(work, struct digi_port, dp_wakeup_work);
+	struct digi_port *priv =
+			container_of(work, struct digi_port, dp_wakeup_work);
 	struct usb_serial_port *port = priv->dp_port;
 	unsigned long flags;
 
@@ -608,15 +609,15 @@ static void digi_wakeup_write(struct usb_serial_port *port)
 
 
 /*
-*  Digi Write OOB Command
-*
-*  Write commands on the out of band port.  Commands are 4
-*  bytes each, multiple commands can be sent at once, and
-*  no command will be split across USB packets.  Returns 0
-*  if successful, -EINTR if interrupted while sleeping and
-*  the interruptible flag is true, or a negative error
-*  returned by usb_submit_urb.
-*/
+ *  Digi Write OOB Command
+ *
+ *  Write commands on the out of band port.  Commands are 4
+ *  bytes each, multiple commands can be sent at once, and
+ *  no command will be split across USB packets.  Returns 0
+ *  if successful, -EINTR if interrupted while sleeping and
+ *  the interruptible flag is true, or a negative error
+ *  returned by usb_submit_urb.
+ */
 
 static int digi_write_oob_command(struct usb_serial_port *port,
 	unsigned char *buf, int count, int interruptible)
@@ -631,8 +632,8 @@ static int digi_write_oob_command(struct usb_serial_port *port,
 	dbg("digi_write_oob_command: TOP: port=%d, count=%d", oob_priv->dp_port_num, count);
 
 	spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
-	while(count > 0) {
-		while(oob_port->write_urb->status == -EINPROGRESS
+	while (count > 0) {
+		while (oob_port->write_urb->status == -EINPROGRESS
 			|| oob_priv->dp_write_urb_in_use) {
 			cond_wait_interruptible_timeout_irqrestore(
 				&oob_port->write_wait, DIGI_RETRY_TIMEOUT,
@@ -649,7 +650,8 @@ static int digi_write_oob_command(struct usb_serial_port *port,
 		memcpy(oob_port->write_urb->transfer_buffer, buf, len);
 		oob_port->write_urb->transfer_buffer_length = len;
 		oob_port->write_urb->dev = port->serial->dev;
-		if ((ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0) {
+		ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
+		if (ret == 0) {
 			oob_priv->dp_write_urb_in_use = 1;
 			count -= len;
 			buf += len;
@@ -664,16 +666,16 @@ static int digi_write_oob_command(struct usb_serial_port *port,
 
 
 /*
-*  Digi Write In Band Command
-*
-*  Write commands on the given port.  Commands are 4
-*  bytes each, multiple commands can be sent at once, and
-*  no command will be split across USB packets.  If timeout
-*  is non-zero, write in band command will return after
-*  waiting unsuccessfully for the URB status to clear for
-*  timeout ticks.  Returns 0 if successful, or a negative
-*  error returned by digi_write.
-*/
+ *  Digi Write In Band Command
+ *
+ *  Write commands on the given port.  Commands are 4
+ *  bytes each, multiple commands can be sent at once, and
+ *  no command will be split across USB packets.  If timeout
+ *  is non-zero, write in band command will return after
+ *  waiting unsuccessfully for the URB status to clear for
+ *  timeout ticks.  Returns 0 if successful, or a negative
+ *  error returned by digi_write.
+ */
 
 static int digi_write_inb_command(struct usb_serial_port *port,
 	unsigned char *buf, int count, unsigned long timeout)
@@ -693,9 +695,10 @@ static int digi_write_inb_command(struct usb_serial_port *port,
 		timeout = ULONG_MAX;
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
-	while(count > 0 && ret == 0) {
-		while((port->write_urb->status == -EINPROGRESS
-			|| priv->dp_write_urb_in_use) && time_before(jiffies, timeout)) {
+	while (count > 0 && ret == 0) {
+		while ((port->write_urb->status == -EINPROGRESS
+				|| priv->dp_write_urb_in_use)
+					&& time_before(jiffies, timeout)) {
 			cond_wait_interruptible_timeout_irqrestore(
 				&port->write_wait, DIGI_RETRY_TIMEOUT,
 				&priv->dp_port_lock, flags);
@@ -726,7 +729,8 @@ static int digi_write_inb_command(struct usb_serial_port *port,
 		}
 		port->write_urb->dev = port->serial->dev;
 
-		if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) {
+		ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (ret == 0) {
 			priv->dp_write_urb_in_use = 1;
 			priv->dp_out_buf_len = 0;
 			count -= len;
@@ -744,14 +748,14 @@ static int digi_write_inb_command(struct usb_serial_port *port,
 
 
 /*
-*  Digi Set Modem Signals
-*
-*  Sets or clears DTR and RTS on the port, according to the
-*  modem_signals argument.  Use TIOCM_DTR and TIOCM_RTS flags
-*  for the modem_signals argument.  Returns 0 if successful,
-*  -EINTR if interrupted while sleeping, or a non-zero error
-*  returned by usb_submit_urb.
-*/
+ *  Digi Set Modem Signals
+ *
+ *  Sets or clears DTR and RTS on the port, according to the
+ *  modem_signals argument.  Use TIOCM_DTR and TIOCM_RTS flags
+ *  for the modem_signals argument.  Returns 0 if successful,
+ *  -EINTR if interrupted while sleeping, or a non-zero error
+ *  returned by usb_submit_urb.
+ */
 
 static int digi_set_modem_signals(struct usb_serial_port *port,
 	unsigned int modem_signals, int interruptible)
@@ -759,7 +763,7 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 
 	int ret;
 	struct digi_port *port_priv = usb_get_serial_port_data(port);
-	struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
+	struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
 	struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
 	unsigned char *data = oob_port->write_urb->transfer_buffer;
 	unsigned long flags = 0;
@@ -771,7 +775,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 	spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
 	spin_lock(&port_priv->dp_port_lock);
 
-	while(oob_port->write_urb->status == -EINPROGRESS || oob_priv->dp_write_urb_in_use) {
+	while (oob_port->write_urb->status == -EINPROGRESS ||
+					oob_priv->dp_write_urb_in_use) {
 		spin_unlock(&port_priv->dp_port_lock);
 		cond_wait_interruptible_timeout_irqrestore(
 			&oob_port->write_wait, DIGI_RETRY_TIMEOUT,
@@ -783,17 +788,20 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 	}
 	data[0] = DIGI_CMD_SET_DTR_SIGNAL;
 	data[1] = port_priv->dp_port_num;
-	data[2] = (modem_signals&TIOCM_DTR) ? DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
+	data[2] = (modem_signals & TIOCM_DTR) ?
+					DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
 	data[3] = 0;
 	data[4] = DIGI_CMD_SET_RTS_SIGNAL;
 	data[5] = port_priv->dp_port_num;
-	data[6] = (modem_signals&TIOCM_RTS) ? DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
+	data[6] = (modem_signals & TIOCM_RTS) ?
+					DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
 	data[7] = 0;
 
 	oob_port->write_urb->transfer_buffer_length = 8;
 	oob_port->write_urb->dev = port->serial->dev;
 
-	if ((ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0) {
+	ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
+	if (ret == 0) {
 		oob_priv->dp_write_urb_in_use = 1;
 		port_priv->dp_modem_signals =
 			(port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS))
@@ -807,16 +815,16 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 }
 
 /*
-*  Digi Transmit Idle
-*
-*  Digi transmit idle waits, up to timeout ticks, for the transmitter
-*  to go idle.  It returns 0 if successful or a negative error.
-*
-*  There are race conditions here if more than one process is calling
-*  digi_transmit_idle on the same port at the same time.  However, this
-*  is only called from close, and only one process can be in close on a
-*  port at a time, so its ok.
-*/
+ *  Digi Transmit Idle
+ *
+ *  Digi transmit idle waits, up to timeout ticks, for the transmitter
+ *  to go idle.  It returns 0 if successful or a negative error.
+ *
+ *  There are race conditions here if more than one process is calling
+ *  digi_transmit_idle on the same port at the same time.  However, this
+ *  is only called from close, and only one process can be in close on a
+ *  port at a time, so its ok.
+ */
 
 static int digi_transmit_idle(struct usb_serial_port *port,
 	unsigned long timeout)
@@ -835,12 +843,13 @@ static int digi_transmit_idle(struct usb_serial_port *port,
 
 	timeout += jiffies;
 
-	if ((ret = digi_write_inb_command(port, buf, 2, timeout - jiffies)) != 0)
+	ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
+	if (ret != 0)
 		return ret;
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
-	while(time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
+	while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
 		cond_wait_interruptible_timeout_irqrestore(
 			&priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
 			&priv->dp_port_lock, flags);
@@ -901,7 +910,7 @@ static void digi_rx_unthrottle(struct tty_struct *tty)
 }
 
 
-static void digi_set_termios(struct tty_struct *tty, 
+static void digi_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct digi_port *priv = usb_get_serial_port_data(port);
@@ -911,14 +920,15 @@ static void digi_set_termios(struct tty_struct *tty,
 	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned char buf[32];
 	unsigned int modem_signals;
-	int arg,ret;
+	int arg, ret;
 	int i = 0;
 	speed_t baud;
 
 	dbg("digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x", priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
 
 	/* set baud rate */
-	if ((baud = tty_get_baud_rate(tty)) != tty_termios_baud_rate(old_termios)) {
+	baud = tty_get_baud_rate(tty);
+	if (baud != tty_termios_baud_rate(old_termios)) {
 		arg = -1;
 
 		/* reassert DTR and (maybe) RTS on transition from B0 */
@@ -932,30 +942,30 @@ static void digi_set_termios(struct tty_struct *tty,
 			digi_set_modem_signals(port, modem_signals, 1);
 		}
 		switch (baud) {
-			/* drop DTR and RTS on transition to B0 */
-			case 0: digi_set_modem_signals(port, 0, 1); break;
-			case 50: arg = DIGI_BAUD_50; break;
-			case 75: arg = DIGI_BAUD_75; break;
-			case 110: arg = DIGI_BAUD_110; break;
-			case 150: arg = DIGI_BAUD_150; break;
-			case 200: arg = DIGI_BAUD_200; break;
-			case 300: arg = DIGI_BAUD_300; break;
-			case 600: arg = DIGI_BAUD_600; break;
-			case 1200: arg = DIGI_BAUD_1200; break;
-			case 1800: arg = DIGI_BAUD_1800; break;
-			case 2400: arg = DIGI_BAUD_2400; break;
-			case 4800: arg = DIGI_BAUD_4800; break;
-			case 9600: arg = DIGI_BAUD_9600; break;
-			case 19200: arg = DIGI_BAUD_19200; break;
-			case 38400: arg = DIGI_BAUD_38400; break;
-			case 57600: arg = DIGI_BAUD_57600; break;
-			case 115200: arg = DIGI_BAUD_115200; break;
-			case 230400: arg = DIGI_BAUD_230400; break;
-			case 460800: arg = DIGI_BAUD_460800; break;
-			default:
-				arg = DIGI_BAUD_9600;
-				baud = 9600;
-				break;
+		/* drop DTR and RTS on transition to B0 */
+		case 0: digi_set_modem_signals(port, 0, 1); break;
+		case 50: arg = DIGI_BAUD_50; break;
+		case 75: arg = DIGI_BAUD_75; break;
+		case 110: arg = DIGI_BAUD_110; break;
+		case 150: arg = DIGI_BAUD_150; break;
+		case 200: arg = DIGI_BAUD_200; break;
+		case 300: arg = DIGI_BAUD_300; break;
+		case 600: arg = DIGI_BAUD_600; break;
+		case 1200: arg = DIGI_BAUD_1200; break;
+		case 1800: arg = DIGI_BAUD_1800; break;
+		case 2400: arg = DIGI_BAUD_2400; break;
+		case 4800: arg = DIGI_BAUD_4800; break;
+		case 9600: arg = DIGI_BAUD_9600; break;
+		case 19200: arg = DIGI_BAUD_19200; break;
+		case 38400: arg = DIGI_BAUD_38400; break;
+		case 57600: arg = DIGI_BAUD_57600; break;
+		case 115200: arg = DIGI_BAUD_115200; break;
+		case 230400: arg = DIGI_BAUD_230400; break;
+		case 460800: arg = DIGI_BAUD_460800; break;
+		default:
+			arg = DIGI_BAUD_9600;
+			baud = 9600;
+			break;
 		}
 		if (arg != -1) {
 			buf[i++] = DIGI_CMD_SET_BAUD_RATE;
@@ -1081,7 +1091,8 @@ static void digi_set_termios(struct tty_struct *tty,
 		buf[i++] = arg;
 		buf[i++] = 0;
 	}
-	if ((ret = digi_write_oob_command(port, buf, i, 1)) != 0)
+	ret = digi_write_oob_command(port, buf, i, 1);
+	if (ret != 0)
 		dbg("digi_set_termios: write oob failed, ret=%d", ret);
 	tty_encode_baud_rate(tty, baud, baud);
 }
@@ -1137,7 +1148,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count)
 {
 
-	int ret,data_len,new_len;
+	int ret, data_len, new_len;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	unsigned char *data = port->write_urb->transfer_buffer;
 	unsigned long flags = 0;
@@ -1155,7 +1166,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
 	/* wait for urb status clear to submit another urb */
-	if (port->write_urb->status == -EINPROGRESS || priv->dp_write_urb_in_use) {
+	if (port->write_urb->status == -EINPROGRESS ||
+					priv->dp_write_urb_in_use) {
 		/* buffer data if count is 1 (probably put_char) if possible */
 		if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
 			priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
@@ -1190,7 +1202,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* copy in new data */
 	memcpy(data, buf, new_len);
 
-	if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) {
+	ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	if (ret == 0) {
 		priv->dp_write_urb_in_use = 1;
 		ret = new_len;
 		priv->dp_out_buf_len = 0;
@@ -1204,7 +1217,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("digi_write: returning %d", ret);
 	return ret;
 
-} 
+}
 
 static void digi_write_bulk_callback(struct urb *urb)
 {
@@ -1219,13 +1232,13 @@ static void digi_write_bulk_callback(struct urb *urb)
 	dbg("digi_write_bulk_callback: TOP, urb->status=%d", status);
 
 	/* port and serial sanity check */
-	if (port == NULL || (priv=usb_get_serial_port_data(port)) == NULL) {
+	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
 		err("%s: port or port->private is NULL, status=%d",
 		    __func__, status);
 		return;
 	}
 	serial = port->serial;
-	if (serial == NULL || (serial_priv=usb_get_serial_data(serial)) == NULL) {
+	if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
 		err("%s: serial or serial->private is NULL, status=%d",
 		    __func__, status);
 		return;
@@ -1248,13 +1261,15 @@ static void digi_write_bulk_callback(struct urb *urb)
 	    && priv->dp_out_buf_len > 0) {
 		*((unsigned char *)(port->write_urb->transfer_buffer))
 			= (unsigned char)DIGI_CMD_SEND_DATA;
-		*((unsigned char *)(port->write_urb->transfer_buffer)+1)
+		*((unsigned char *)(port->write_urb->transfer_buffer) + 1)
 			= (unsigned char)priv->dp_out_buf_len;
-		port->write_urb->transfer_buffer_length = priv->dp_out_buf_len+2;
+		port->write_urb->transfer_buffer_length =
+						priv->dp_out_buf_len + 2;
 		port->write_urb->dev = serial->dev;
-		memcpy(port->write_urb->transfer_buffer+2, priv->dp_out_buf,
+		memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
 			priv->dp_out_buf_len);
-		if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) {
+		ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+		if (ret == 0) {
 			priv->dp_write_urb_in_use = 1;
 			priv->dp_out_buf_len = 0;
 		}
@@ -1280,7 +1295,8 @@ static int digi_write_room(struct tty_struct *tty)
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
-	if (port->write_urb->status == -EINPROGRESS || priv->dp_write_urb_in_use)
+	if (port->write_urb->status == -EINPROGRESS ||
+					priv->dp_write_urb_in_use)
 		room = 0;
 	else
 		room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
@@ -1336,7 +1352,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	/* wait for a close in progress to finish */
-	while(priv->dp_in_close) {
+	while (priv->dp_in_close) {
 		cond_wait_interruptible_timeout_irqrestore(
 			&priv->dp_close_wait, DIGI_RETRY_TIMEOUT,
 			&priv->dp_port_lock, flags);
@@ -1346,7 +1362,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
- 
+
 	/* read modem signals automatically whenever they change */
 	buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
 	buf[1] = priv->dp_port_num;
@@ -1359,7 +1375,8 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
 	buf[7] = 0;
 
-	if ((ret = digi_write_oob_command(port, buf, 8, 1)) != 0)
+	ret = digi_write_oob_command(port, buf, 8, 1);
+	if (ret != 0)
 		dbg("digi_open: write oob failed, ret=%d", ret);
 
 	/* set termios settings */
@@ -1410,9 +1427,8 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 
 	if (port->serial->dev) {
 		/* wait for transmit idle */
-		if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) {
+		if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
 			digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
-		}
 		/* drop DTR and RTS */
 		digi_set_modem_signals(port, 0, 0);
 
@@ -1446,11 +1462,13 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 		buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
 		buf[19] = 0;
 
-		if ((ret = digi_write_oob_command(port, buf, 20, 0)) != 0)
+		ret = digi_write_oob_command(port, buf, 20, 0);
+		if (ret != 0)
 			dbg("digi_close: write oob failed, ret=%d", ret);
 
 		/* wait for final commands on oob port to complete */
-		prepare_to_wait(&priv->dp_flush_wait, &wait, TASK_INTERRUPTIBLE);
+		prepare_to_wait(&priv->dp_flush_wait, &wait,
+							TASK_INTERRUPTIBLE);
 		schedule_timeout(DIGI_CLOSE_TIMEOUT);
 		finish_wait(&priv->dp_flush_wait, &wait);
 
@@ -1470,15 +1488,15 @@ exit:
 
 
 /*
-*  Digi Startup Device
-*
-*  Starts reads on all ports.  Must be called AFTER startup, with
-*  urbs initialized.  Returns 0 if successful, non-zero error otherwise.
-*/
+ *  Digi Startup Device
+ *
+ *  Starts reads on all ports.  Must be called AFTER startup, with
+ *  urbs initialized.  Returns 0 if successful, non-zero error otherwise.
+ */
 
 static int digi_startup_device(struct usb_serial *serial)
 {
-	int i,ret = 0;
+	int i, ret = 0;
 	struct digi_serial *serial_priv = usb_get_serial_data(serial);
 	struct usb_serial_port *port;
 
@@ -1496,7 +1514,8 @@ static int digi_startup_device(struct usb_serial *serial)
 	for (i = 0; i < serial->type->num_ports + 1; i++) {
 		port = serial->port[i];
 		port->write_urb->dev = port->serial->dev;
-		if ((ret = usb_submit_urb(port->read_urb, GFP_KERNEL)) != 0) {
+		ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
+		if (ret != 0) {
 			err("%s: usb_submit_urb failed, ret=%d, port=%d",
 					__func__, ret, i);
 			break;
@@ -1517,7 +1536,7 @@ static int digi_startup(struct usb_serial *serial)
 
 	/* allocate the private data structures for all ports */
 	/* number of regular ports + 1 for the out-of-band port */
-	for(i = 0; i < serial->type->num_ports + 1; i++) {
+	for (i = 0; i < serial->type->num_ports + 1; i++) {
 		/* allocate port private structure */
 		priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL);
 		if (priv == NULL) {
@@ -1580,7 +1599,7 @@ static void digi_shutdown(struct usb_serial *serial)
 
 	/* free the private data structures for all ports */
 	/* number of regular ports + 1 for the out-of-band port */
-	for(i = 0; i < serial->type->num_ports + 1; i++)
+	for (i = 0; i < serial->type->num_ports + 1; i++)
 		kfree(usb_get_serial_port_data(serial->port[i]));
 	kfree(usb_get_serial_data(serial));
 }
@@ -1603,7 +1622,7 @@ static void digi_read_bulk_callback(struct urb *urb)
 		return;
 	}
 	if (port->serial == NULL ||
-		(serial_priv=usb_get_serial_data(port->serial)) == NULL) {
+		(serial_priv = usb_get_serial_data(port->serial)) == NULL) {
 		err("%s: serial is bad or serial->private is NULL, status=%d",
 			__func__, status);
 		return;
@@ -1627,22 +1646,23 @@ static void digi_read_bulk_callback(struct urb *urb)
 
 	/* continue read */
 	urb->dev = port->serial->dev;
-	if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret != 0) {
 		err("%s: failed resubmitting urb, ret=%d, port=%d",
 		    __func__, ret, priv->dp_port_num);
 	}
 
 }
 
-/* 
-*  Digi Read INB Callback
-*
-*  Digi Read INB Callback handles reads on the in band ports, sending
-*  the data on to the tty subsystem.  When called we know port and
-*  port->private are not NULL and port->serial has been validated.
-*  It returns 0 if successful, 1 if successful but the port is
-*  throttled, and -1 if the sanity checks failed.
-*/
+/*
+ *  Digi Read INB Callback
+ *
+ *  Digi Read INB Callback handles reads on the in band ports, sending
+ *  the data on to the tty subsystem.  When called we know port and
+ *  port->private are not NULL and port->serial has been validated.
+ *  It returns 0 if successful, 1 if successful but the port is
+ *  throttled, and -1 if the sanity checks failed.
+ */
 
 static int digi_read_inb_callback(struct urb *urb)
 {
@@ -1653,8 +1673,8 @@ static int digi_read_inb_callback(struct urb *urb)
 	int opcode = ((unsigned char *)urb->transfer_buffer)[0];
 	int len = ((unsigned char *)urb->transfer_buffer)[1];
 	int port_status = ((unsigned char *)urb->transfer_buffer)[2];
-	unsigned char *data = ((unsigned char *)urb->transfer_buffer)+3;
-	int flag,throttled;
+	unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
+	int flag, throttled;
 	int i;
 	int status = urb->status;
 
@@ -1665,7 +1685,7 @@ static int digi_read_inb_callback(struct urb *urb)
 
 	/* short/multiple packet check */
 	if (urb->actual_length != len + 2) {
-     		err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, "
+		err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, "
 		    "port=%d, opcode=%d, len=%d, actual_length=%d, "
 		    "status=%d", __func__, status, priv->dp_port_num,
 		    opcode, len, urb->actual_length, port_status);
@@ -1707,8 +1727,9 @@ static int digi_read_inb_callback(struct urb *urb)
 			if (flag == TTY_NORMAL)
 				tty_insert_flip_string(tty, data, len);
 			else {
-				for(i = 0; i < len; i++)
-					tty_insert_flip_char(tty, data[i], flag);
+				for (i = 0; i < len; i++)
+					tty_insert_flip_char(tty,
+								data[i], flag);
 			}
 			tty_flip_buffer_push(tty);
 		}
@@ -1720,19 +1741,19 @@ static int digi_read_inb_callback(struct urb *urb)
 	else if (opcode != DIGI_CMD_RECEIVE_DATA)
 		dbg("%s: unknown opcode: %d", __func__, opcode);
 
-	return(throttled ? 1 : 0);
+	return throttled ? 1 : 0;
 
 }
 
 
-/* 
-*  Digi Read OOB Callback
-*
-*  Digi Read OOB Callback handles reads on the out of band port.
-*  When called we know port and port->private are not NULL and
-*  the port->serial is valid.  It returns 0 if successful, and
-*  -1 if the sanity checks failed.
-*/
+/*
+ *  Digi Read OOB Callback
+ *
+ *  Digi Read OOB Callback handles reads on the out of band port.
+ *  When called we know port and port->private are not NULL and
+ *  the port->serial is valid.  It returns 0 if successful, and
+ *  -1 if the sanity checks failed.
+ */
 
 static int digi_read_oob_callback(struct urb *urb)
 {
@@ -1742,12 +1763,13 @@ static int digi_read_oob_callback(struct urb *urb)
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	int opcode, line, status, val;
 	int i;
+	unsigned int rts;
 
 	dbg("digi_read_oob_callback: port=%d, len=%d",
 			priv->dp_port_num, urb->actual_length);
 
 	/* handle each oob command */
-	for(i = 0; i < urb->actual_length - 3;) {
+	for (i = 0; i < urb->actual_length - 3;) {
 		opcode = ((unsigned char *)urb->transfer_buffer)[i++];
 		line = ((unsigned char *)urb->transfer_buffer)[i++];
 		status = ((unsigned char *)urb->transfer_buffer)[i++];
@@ -1761,27 +1783,29 @@ static int digi_read_oob_callback(struct urb *urb)
 
 		port = serial->port[line];
 
-		if ((priv=usb_get_serial_port_data(port)) == NULL)
+		priv = usb_get_serial_port_data(port);
+		if (priv == NULL)
 			return -1;
 
+		rts = 0;
+		if (port->port.count)
+			rts = port->port.tty->termios->c_cflag & CRTSCTS;
+
 		if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
 			spin_lock(&priv->dp_port_lock);
 			/* convert from digi flags to termiox flags */
 			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
 				priv->dp_modem_signals |= TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (port->port.count
-					&& port->port.tty->termios->c_cflag & CRTSCTS) {
+				if (rts) {
 					port->port.tty->hw_stopped = 0;
 					digi_wakeup_write(port);
 				}
 			} else {
 				priv->dp_modem_signals &= ~TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (port->port.count
-					&& port->port.tty->termios->c_cflag & CRTSCTS) {
+				if (rts)
 					port->port.tty->hw_stopped = 1;
-				}
 			}
 			if (val & DIGI_READ_INPUT_SIGNALS_DSR)
 				priv->dp_modem_signals |= TIOCM_DSR;
@@ -1818,7 +1842,7 @@ static int __init digi_init(void)
 	if (retval)
 		goto failed_acceleport_2_device;
 	retval = usb_serial_register(&digi_acceleport_4_device);
-	if (retval) 
+	if (retval)
 		goto failed_acceleport_4_device;
 	retval = usb_register(&digi_driver);
 	if (retval)
-- 
cgit v1.2.3


From 93c467952ff6b5c3d92fddf4b1a609e68f6d08d1 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:11:11 +0100
Subject: empeg: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/empeg.c | 203 ++++++++++++++++++++++++---------------------
 1 file changed, 107 insertions(+), 96 deletions(-)

diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 47ebdf5fad8..a6ab5b58d9c 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -11,36 +11,39 @@
  *	it under the terms of the GNU General Public License, as published by
  *	the Free Software Foundation, version 2.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- * 
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
+ *
  * (07/16/2001) gb
- *	remove unused code in empeg_close() (thanks to Oliver Neukum for pointing this
- *	out) and rewrote empeg_set_termios().
- * 
+ *	remove unused code in empeg_close() (thanks to Oliver Neukum for
+ *	pointing this out) and rewrote empeg_set_termios().
+ *
  * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of problems.
+ *	switched from using spinlock to a semaphore, which fixes lots of
+ * problems.
  *
  * (04/08/2001) gb
  *      Identify version on module load.
- * 
+ *
  * (01/22/2001) gb
- *	Added write_room() and chars_in_buffer() support. 
- * 
+ *	Added write_room() and chars_in_buffer() support.
+ *
  * (12/21/2000) gb
  *	Moved termio stuff inside the port->active check.
  *	Moved MOD_DEC_USE_COUNT to end of empeg_close().
- * 
+ *
  * (12/03/2000) gb
- *	Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to empeg_open()
- *	This notifies the tty driver that the termios have changed.
- * 
+ *	Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to
+ *	empeg_open(). This notifies the tty driver that the termios have
+ *	changed.
+ *
  * (11/13/2000) gb
- *	Moved tty->low_latency = 1 from empeg_read_bulk_callback() to empeg_open()
- *	(It only needs to be set once - Doh!)
- * 
+ *	Moved tty->low_latency = 1 from empeg_read_bulk_callback() to
+ *	empeg_open() (It only needs to be set once - Doh!)
+ *
  * (11/11/2000) gb
  *	Updated to work with id_table structure.
- * 
+ *
  * (11/04/2000) gb
  *	Forked this from visor.c, and hacked it up to work with an
  *	Empeg ltd. empeg-car player.  Constructive criticism welcomed.
@@ -48,7 +51,7 @@
  *	use of his code, and for his guidance, advice and patience. :)
  *	A 'Thank You' is in order for John Ripley of Empeg ltd for his
  *	advice, and patience too.
- * 
+ *
  */
 
 #include <linux/kernel.h>
@@ -60,7 +63,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -77,27 +80,30 @@ static int debug;
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void empeg_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int  empeg_write			(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf,
-					int count);
-static int  empeg_write_room		(struct tty_struct *tty);
-static int  empeg_chars_in_buffer	(struct tty_struct *tty);
-static void empeg_throttle		(struct tty_struct *tty);
-static void empeg_unthrottle		(struct tty_struct *tty);
-static int  empeg_startup		(struct usb_serial *serial);
-static void empeg_shutdown		(struct usb_serial *serial);
-static void empeg_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios);
-static void empeg_write_bulk_callback	(struct urb *urb);
-static void empeg_read_bulk_callback	(struct urb *urb);
+static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
+						struct file *filp);
+static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
+						struct file *filp);
+static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
+						const unsigned char *buf,
+						int count);
+static int  empeg_write_room(struct tty_struct *tty);
+static int  empeg_chars_in_buffer(struct tty_struct *tty);
+static void empeg_throttle(struct tty_struct *tty);
+static void empeg_unthrottle(struct tty_struct *tty);
+static int  empeg_startup(struct usb_serial *serial);
+static void empeg_shutdown(struct usb_serial *serial);
+static void empeg_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_write_bulk_callback(struct urb *urb);
+static void empeg_read_bulk_callback(struct urb *urb);
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver empeg_driver = {
 	.name =		"empeg",
@@ -149,7 +155,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("%s - port %d", __func__, port->number);
 
 	/* Force default termio settings */
-	empeg_set_termios (tty, port, NULL) ;
+	empeg_set_termios(tty, port, NULL) ;
 
 	bytes_in = 0;
 	bytes_out = 0;
@@ -157,7 +163,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 	/* Start reading from the device */
 	usb_fill_bulk_urb(
 		port->read_urb,
-		serial->dev, 
+		serial->dev,
 		usb_rcvbulkpipe(serial->dev,
 			port->bulk_in_endpointAddress),
 		port->read_urb->transfer_buffer,
@@ -168,14 +174,16 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 
 	if (result)
-		dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
 
 	return result;
 }
 
 
 static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file * filp)
+				struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -186,7 +194,8 @@ static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
 }
 
 
-static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count)
+static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	struct urb *urb;
@@ -203,7 +212,7 @@ static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, con
 		/* try to find a free urb in our list of them */
 		urb = NULL;
 
-		spin_lock_irqsave (&write_urb_pool_lock, flags);
+		spin_lock_irqsave(&write_urb_pool_lock, flags);
 
 		for (i = 0; i < NUM_URBS; ++i) {
 			if (write_urb_pool[i]->status != -EINPROGRESS) {
@@ -212,7 +221,7 @@ static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, con
 			}
 		}
 
-		spin_unlock_irqrestore (&write_urb_pool_lock, flags);
+		spin_unlock_irqrestore(&write_urb_pool_lock, flags);
 
 		if (urb == NULL) {
 			dbg("%s - no more free urbs", __func__);
@@ -220,25 +229,27 @@ static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, con
 		}
 
 		if (urb->transfer_buffer == NULL) {
-			urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
+			urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
 			if (urb->transfer_buffer == NULL) {
-				dev_err(&port->dev, "%s no more kernel memory...\n", __func__);
+				dev_err(&port->dev,
+					"%s no more kernel memory...\n",
+								__func__);
 				goto exit;
 			}
 		}
 
-		transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE);
+		transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
 
-		memcpy (urb->transfer_buffer, current_position, transfer_size);
+		memcpy(urb->transfer_buffer, current_position, transfer_size);
 
 		usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer);
 
 		/* build up our urb */
-		usb_fill_bulk_urb (
+		usb_fill_bulk_urb(
 			urb,
 			serial->dev,
 			usb_sndbulkpipe(serial->dev,
-				port->bulk_out_endpointAddress), 
+					port->bulk_out_endpointAddress),
 			urb->transfer_buffer,
 			transfer_size,
 			empeg_write_bulk_callback,
@@ -260,7 +271,7 @@ static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, con
 	}
 exit:
 	return bytes_sent;
-} 
+}
 
 
 static int empeg_write_room(struct tty_struct *tty)
@@ -272,14 +283,13 @@ static int empeg_write_room(struct tty_struct *tty)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave (&write_urb_pool_lock, flags);
+	spin_lock_irqsave(&write_urb_pool_lock, flags);
 	/* tally up the number of bytes available */
 	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]->status != -EINPROGRESS) {
+		if (write_urb_pool[i]->status != -EINPROGRESS)
 			room += URB_TRANSFER_BUFFER_SIZE;
-		}
-	} 
-	spin_unlock_irqrestore (&write_urb_pool_lock, flags);
+	}
+	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
 	dbg("%s - returns %d", __func__, room);
 	return room;
 
@@ -295,25 +305,21 @@ static int empeg_chars_in_buffer(struct tty_struct *tty)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave (&write_urb_pool_lock, flags);
+	spin_lock_irqsave(&write_urb_pool_lock, flags);
 
 	/* tally up the number of bytes waiting */
 	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]->status == -EINPROGRESS) {
+		if (write_urb_pool[i]->status == -EINPROGRESS)
 			chars += URB_TRANSFER_BUFFER_SIZE;
-		}
 	}
 
-	spin_unlock_irqrestore (&write_urb_pool_lock, flags);
-
+	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
 	dbg("%s - returns %d", __func__, chars);
-
-	return (chars);
-
+	return chars;
 }
 
 
-static void empeg_write_bulk_callback (struct urb *urb)
+static void empeg_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	int status = urb->status;
@@ -330,7 +336,7 @@ static void empeg_write_bulk_callback (struct urb *urb)
 }
 
 
-static void empeg_read_bulk_callback (struct urb *urb)
+static void empeg_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct tty_struct *tty;
@@ -346,8 +352,8 @@ static void empeg_read_bulk_callback (struct urb *urb)
 		return;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
-
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
 	tty = port->port.tty;
 
 	if (urb->actual_length) {
@@ -360,7 +366,7 @@ static void empeg_read_bulk_callback (struct urb *urb)
 	/* Continue trying to always read  */
 	usb_fill_bulk_urb(
 		port->read_urb,
-		port->serial->dev, 
+		port->serial->dev,
 		usb_rcvbulkpipe(port->serial->dev,
 			port->bulk_in_endpointAddress),
 		port->read_urb->transfer_buffer,
@@ -371,7 +377,9 @@ static void empeg_read_bulk_callback (struct urb *urb)
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 
 	if (result)
-		dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
+		dev_err(&urb->dev->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+							__func__, result);
 
 	return;
 
@@ -395,11 +403,13 @@ static void empeg_unthrottle(struct tty_struct *tty)
 	port->read_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	if (result)
-		dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
 }
 
 
-static int  empeg_startup (struct usb_serial *serial)
+static int  empeg_startup(struct usb_serial *serial)
 {
 	int r;
 
@@ -411,7 +421,7 @@ static int  empeg_startup (struct usb_serial *serial)
 		return -ENODEV;
 	}
 	dbg("%s - reset config", __func__);
-	r = usb_reset_configuration (serial->dev);
+	r = usb_reset_configuration(serial->dev);
 
 	/* continue on with initialization */
 	return r;
@@ -419,9 +429,9 @@ static int  empeg_startup (struct usb_serial *serial)
 }
 
 
-static void empeg_shutdown (struct usb_serial *serial)
+static void empeg_shutdown(struct usb_serial *serial)
 {
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 }
 
 
@@ -432,14 +442,14 @@ static void empeg_set_termios(struct tty_struct *tty,
 	dbg("%s - port %d", __func__, port->number);
 
 	/*
-         * The empeg-car player wants these particular tty settings.
-         * You could, for example, change the baud rate, however the
-         * player only supports 115200 (currently), so there is really
-         * no point in support for changes to the tty settings.
-         * (at least for now)
-         *
-         * The default requirements for this device are:
-         */
+	 * The empeg-car player wants these particular tty settings.
+	 * You could, for example, change the baud rate, however the
+	 * player only supports 115200 (currently), so there is really
+	 * no point in support for changes to the tty settings.
+	 * (at least for now)
+	 *
+	 * The default requirements for this device are:
+	 */
 	termios->c_iflag
 		&= ~(IGNBRK	/* disable ignore break */
 		| BRKINT	/* disable break causes interrupt */
@@ -478,13 +488,13 @@ static void empeg_set_termios(struct tty_struct *tty,
 }
 
 
-static int __init empeg_init (void)
+static int __init empeg_init(void)
 {
 	struct urb *urb;
 	int i, retval;
 
-	/* create our write urb pool and transfer buffers */ 
-	spin_lock_init (&write_urb_pool_lock);
+	/* create our write urb pool and transfer buffers */
+	spin_lock_init(&write_urb_pool_lock);
 	for (i = 0; i < NUM_URBS; ++i) {
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		write_urb_pool[i] = urb;
@@ -493,9 +503,10 @@ static int __init empeg_init (void)
 			continue;
 		}
 
-		urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
+		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
+								GFP_KERNEL);
 		if (!urb->transfer_buffer) {
-			err("%s - out of memory for urb buffers.", 
+			err("%s - out of memory for urb buffers.",
 			    __func__);
 			continue;
 		}
@@ -524,36 +535,36 @@ failed_usb_serial_register:
 }
 
 
-static void __exit empeg_exit (void)
+static void __exit empeg_exit(void)
 {
 	int i;
 	unsigned long flags;
 
 	usb_deregister(&empeg_driver);
-	usb_serial_deregister (&empeg_device);
+	usb_serial_deregister(&empeg_device);
 
-	spin_lock_irqsave (&write_urb_pool_lock, flags);
+	spin_lock_irqsave(&write_urb_pool_lock, flags);
 
 	for (i = 0; i < NUM_URBS; ++i) {
 		if (write_urb_pool[i]) {
-			/* FIXME - uncomment the following usb_kill_urb call when
-			 * the host controllers get fixed to set urb->dev = NULL after
-			 * the urb is finished.  Otherwise this call oopses. */
+			/* FIXME - uncomment the following usb_kill_urb call
+			 * when the host controllers get fixed to set urb->dev
+			 * = NULL after the urb is finished.  Otherwise this
+			 * call oopses. */
 			/* usb_kill_urb(write_urb_pool[i]); */
 			kfree(write_urb_pool[i]->transfer_buffer);
-			usb_free_urb (write_urb_pool[i]);
+			usb_free_urb(write_urb_pool[i]);
 		}
 	}
-
-	spin_unlock_irqrestore (&write_urb_pool_lock, flags);
+	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
 }
 
 
 module_init(empeg_init);
 module_exit(empeg_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From 464cbb24698ddb7bf24b2b73204e3dc121886211 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:11:23 +0100
Subject: ftdi_sio: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ftdi_sio.c | 1078 ++++++++++++++++++++++-------------------
 drivers/usb/serial/ftdi_sio.h |  126 ++---
 2 files changed, 635 insertions(+), 569 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index abbb447e537..83871725014 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -12,7 +12,8 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
  *	and extra documentation
@@ -25,7 +26,8 @@
 /* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
 /* Thanx to FTDI for so kindly providing details of the protocol required */
 /*   to talk to the device */
-/* Thanx to gkh and the rest of the usb dev group for all code I have assimilated :-) */
+/* Thanx to gkh and the rest of the usb dev group for all code I have
+   assimilated :-) */
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -36,7 +38,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/serial.h>
 #include <linux/usb/serial.h>
@@ -55,17 +57,22 @@ static __u16 product;
 
 struct ftdi_private {
 	ftdi_chip_type_t chip_type;
-				/* type of the device, either SIO or FT8U232AM */
+				/* type of device, either SIO or FT8U232AM */
 	int baud_base;		/* baud base clock for divisor setting */
-	int custom_divisor;	/* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */
+	int custom_divisor;	/* custom_divisor kludge, this is for
+				   baud_base (different from what goes to the
+				   chip!) */
 	__u16 last_set_data_urb_value ;
-				/* the last data state set - needed for doing a break */
-        int write_offset;       /* This is the offset in the usb data block to write the serial data -
-				 * it is different between devices
+				/* the last data state set - needed for doing
+				 * a break
+				 */
+	int write_offset;       /* This is the offset in the usb data block to
+				 * write the serial data - it varies between
+				 * devices
 				 */
 	int flags;		/* some ASYNC_xxxx flags are supported */
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
-        wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
+	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
 	__u8 rx_flags;		/* receive state flags (throttling) */
 	spinlock_t rx_lock;	/* spinlock for receive state */
@@ -76,8 +83,10 @@ struct ftdi_private {
 
 	__u16 interface;	/* FT2232C port interface (0 for FT232/245) */
 
-	speed_t force_baud;	/* if non-zero, force the baud rate to this value */
-	int force_rtscts;	/* if non-zero, force RTS-CTS to always be enabled */
+	speed_t force_baud;	/* if non-zero, force the baud rate to
+				   this value */
+	int force_rtscts;	/* if non-zero, force RTS-CTS to always
+				   be enabled */
 
 	spinlock_t tx_lock;	/* spinlock for transmit state */
 	unsigned long tx_bytes;
@@ -88,13 +97,14 @@ struct ftdi_private {
 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
 struct ftdi_sio_quirk {
 	int (*probe)(struct usb_serial *);
-	void (*port_probe)(struct ftdi_private *); /* Special settings for probed ports. */
+	/* Special settings for probed ports. */
+	void (*port_probe)(struct ftdi_private *);
 };
 
-static int   ftdi_jtag_probe		(struct usb_serial *serial);
-static int   ftdi_mtxorb_hack_setup	(struct usb_serial *serial);
-static void  ftdi_USB_UIRT_setup	(struct ftdi_private *priv);
-static void  ftdi_HE_TIRA1_setup	(struct ftdi_private *priv);
+static int   ftdi_jtag_probe(struct usb_serial *serial);
+static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
+static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
+static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
 static struct ftdi_sio_quirk ftdi_jtag_quirk = {
 	.probe	= ftdi_jtag_probe,
@@ -174,270 +184,270 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0100_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0101_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0102_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0103_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0104_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0105_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0106_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0107_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0108_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0109_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0110_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0111_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0112_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0113_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0114_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0115_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0116_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0117_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0118_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0119_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0120_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0121_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0122_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0123_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0124_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0125_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0126_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0127_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0128_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0129_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012C_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0130_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0131_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0132_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0133_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0134_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0135_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0136_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0137_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0138_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0139_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0140_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0141_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0142_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0143_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0144_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0145_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0146_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0147_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0148_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0149_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0150_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0151_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0152_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0153_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0154_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0155_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0156_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0157_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0158_PID),
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0159_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0160_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0161_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0162_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0163_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0164_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0165_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0166_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0167_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0168_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0169_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0170_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0171_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0172_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0173_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0174_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0175_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0176_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0177_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0178_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0179_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0180_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0181_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0182_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0183_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0184_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0185_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0186_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0187_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0188_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0189_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0190_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0191_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0192_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0193_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0194_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0195_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0196_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0197_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0198_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0199_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019A_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019B_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019C_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019D_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019E_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019F_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01ED_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EF_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F0_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F1_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F2_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F3_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F4_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F5_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F6_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F7_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F8_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F9_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FA_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FB_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FC_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FD_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FE_PID) },
-	{ USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
+	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
@@ -642,7 +652,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ }					/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver ftdi_driver = {
 	.name =		"ftdi_sio",
@@ -678,30 +688,37 @@ static const char *ftdi_chip_name[] = {
  | ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP)
 
 /* function prototypes for a FTDI serial converter */
-static int  ftdi_sio_probe	(struct usb_serial *serial, const struct usb_device_id *id);
-static void ftdi_shutdown		(struct usb_serial *serial);
-static int  ftdi_sio_port_probe	(struct usb_serial_port *port);
-static int  ftdi_sio_port_remove	(struct usb_serial_port *port);
-static int  ftdi_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void ftdi_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int  ftdi_write			(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  ftdi_write_room		(struct tty_struct *tty);
-static int  ftdi_chars_in_buffer	(struct tty_struct *tty);
-static void ftdi_write_bulk_callback	(struct urb *urb);
-static void ftdi_read_bulk_callback	(struct urb *urb);
-static void ftdi_process_read		(struct work_struct *work);
-static void ftdi_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
-static int  ftdi_tiocmget               (struct tty_struct *tty, struct file *file);
-static int  ftdi_tiocmset		(struct tty_struct *tty, struct file * file, unsigned int set, unsigned int clear);
-static int  ftdi_ioctl			(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-static void ftdi_break_ctl		(struct tty_struct *tty, int break_state );
-static void ftdi_throttle		(struct tty_struct *tty);
-static void ftdi_unthrottle		(struct tty_struct *tty);
-
-static unsigned short int ftdi_232am_baud_base_to_divisor (int baud, int base);
-static unsigned short int ftdi_232am_baud_to_divisor (int baud);
-static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
-static __u32 ftdi_232bm_baud_to_divisor (int baud);
+static int  ftdi_sio_probe(struct usb_serial *serial,
+					const struct usb_device_id *id);
+static void ftdi_shutdown(struct usb_serial *serial);
+static int  ftdi_sio_port_probe(struct usb_serial_port *port);
+static int  ftdi_sio_port_remove(struct usb_serial_port *port);
+static int  ftdi_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void ftdi_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+static int  ftdi_write_room(struct tty_struct *tty);
+static int  ftdi_chars_in_buffer(struct tty_struct *tty);
+static void ftdi_write_bulk_callback(struct urb *urb);
+static void ftdi_read_bulk_callback(struct urb *urb);
+static void ftdi_process_read(struct work_struct *work);
+static void ftdi_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static int  ftdi_tiocmget(struct tty_struct *tty, struct file *file);
+static int  ftdi_tiocmset(struct tty_struct *tty, struct file *file,
+			unsigned int set, unsigned int clear);
+static int  ftdi_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg);
+static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
+static void ftdi_throttle(struct tty_struct *tty);
+static void ftdi_unthrottle(struct tty_struct *tty);
+
+static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
+static unsigned short int ftdi_232am_baud_to_divisor(int baud);
+static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
+static __u32 ftdi_232bm_baud_to_divisor(int baud);
 
 static struct usb_serial_driver ftdi_sio_device = {
 	.driver = {
@@ -752,44 +769,54 @@ static struct usb_serial_driver ftdi_sio_device = {
 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
 {
 	unsigned short int divisor;
-	int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
-	if ((divisor3 & 0x7) == 7) divisor3 ++; // round x.7/8 up to x+1
+	/* divisor shifted 3 bits to the left */
+	int divisor3 = base / 2 / baud;
+	if ((divisor3 & 0x7) == 7)
+		divisor3++; /* round x.7/8 up to x+1 */
 	divisor = divisor3 >> 3;
 	divisor3 &= 0x7;
-	if (divisor3 == 1) divisor |= 0xc000; else // 0.125
-	if (divisor3 >= 4) divisor |= 0x4000; else // 0.5
-	if (divisor3 != 0) divisor |= 0x8000;      // 0.25
-	if (divisor == 1) divisor = 0;	/* special case for maximum baud rate */
+	if (divisor3 == 1)
+		divisor |= 0xc000;
+	else if (divisor3 >= 4)
+		divisor |= 0x4000;
+	else if (divisor3 != 0)
+		divisor |= 0x8000;
+	else if (divisor == 1)
+		divisor = 0;	/* special case for maximum baud rate */
 	return divisor;
 }
 
 static unsigned short int ftdi_232am_baud_to_divisor(int baud)
 {
-	 return(ftdi_232am_baud_base_to_divisor(baud, 48000000));
+	 return ftdi_232am_baud_base_to_divisor(baud, 48000000);
 }
 
 static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
 {
 	static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
 	__u32 divisor;
-	int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
+	/* divisor shifted 3 bits to the left */
+	int divisor3 = base / 2 / baud;
 	divisor = divisor3 >> 3;
 	divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
 	/* Deal with special cases for highest baud rates. */
-	if (divisor == 1) divisor = 0; else	// 1.0
-	if (divisor == 0x4001) divisor = 1;	// 1.5
+	if (divisor == 1)
+		divisor = 0;
+	else if (divisor == 0x4001)
+		divisor = 1;
 	return divisor;
 }
 
 static __u32 ftdi_232bm_baud_to_divisor(int baud)
 {
-	 return(ftdi_232bm_baud_base_to_divisor(baud, 48000000));
+	 return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
 }
 
 #define set_mctrl(port, set)		update_mctrl((port), (set), 0)
 #define clear_mctrl(port, clear)	update_mctrl((port), 0, (clear))
 
-static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear)
+static int update_mctrl(struct usb_serial_port *port, unsigned int set,
+							unsigned int clear)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char *buf;
@@ -843,7 +870,8 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned
 }
 
 
-static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *port)
+static __u32 get_ftdi_divisor(struct tty_struct *tty,
+						struct usb_serial_port *port)
 { /* get_ftdi_divisor */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	__u32 div_value = 0;
@@ -851,48 +879,56 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *po
 	int baud;
 
 	/*
-	 * The logic involved in setting the baudrate can be cleanly split in 3 steps.
-	 * Obtaining the actual baud rate is a little tricky since unix traditionally
-	 * somehow ignored the possibility to set non-standard baud rates.
+	 * The logic involved in setting the baudrate can be cleanly split into
+	 * 3 steps.
 	 * 1. Standard baud rates are set in tty->termios->c_cflag
-	 * 2. If these are not enough, you can set any speed using alt_speed as follows:
+	 * 2. If these are not enough, you can set any speed using alt_speed as
+	 * follows:
 	 *    - set tty->termios->c_cflag speed to B38400
 	 *    - set your real speed in tty->alt_speed; it gets ignored when
 	 *      alt_speed==0, (or)
-	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
-	 *      flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], this just
-	 *      sets alt_speed to (HI: 57600, VHI: 115200, SHI: 230400, WARP: 460800)
+	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as
+	 *	follows:
+	 *      flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP],
+	 *	this just sets alt_speed to (HI: 57600, VHI: 115200,
+	 *	SHI: 230400, WARP: 460800)
 	 * ** Steps 1, 2 are done courtesy of tty_get_baud_rate
 	 * 3. You can also set baud rate by setting custom divisor as follows
 	 *    - set tty->termios->c_cflag speed to B38400
-	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
+	 *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as
+	 *	follows:
 	 *      o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
 	 *      o custom_divisor set to baud_base / your_new_baudrate
-	 * ** Step 3 is done courtesy of code borrowed from serial.c - I should really
-	 *    spend some time and separate+move this common code to serial.c, it is
-	 *    replicated in nearly every serial driver you see.
+	 * ** Step 3 is done courtesy of code borrowed from serial.c
+	 *    I should really spend some time and separate + move this common
+	 *    code to serial.c, it is replicated in nearly every serial driver
+	 *    you see.
 	 */
 
-	/* 1. Get the baud rate from the tty settings, this observes alt_speed hack */
+	/* 1. Get the baud rate from the tty settings, this observes
+	      alt_speed hack */
 
 	baud = tty_get_baud_rate(tty);
 	dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
 
-	/* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */
+	/* 2. Observe async-compatible custom_divisor hack, update baudrate
+	   if needed */
 
 	if (baud == 38400 &&
 	    ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
 	     (priv->custom_divisor)) {
 		baud = priv->baud_base / priv->custom_divisor;
-		dbg("%s - custom divisor %d sets baud rate to %d", __func__, priv->custom_divisor, baud);
+		dbg("%s - custom divisor %d sets baud rate to %d",
+				__func__, priv->custom_divisor, baud);
 	}
 
 	/* 3. Convert baudrate to device-specific divisor */
 
-	if (!baud) baud = 9600;
-	switch(priv->chip_type) {
+	if (!baud)
+		baud = 9600;
+	switch (priv->chip_type) {
 	case SIO: /* SIO chip */
-		switch(baud) {
+		switch (baud) {
 		case 300: div_value = ftdi_sio_b300; break;
 		case 600: div_value = ftdi_sio_b600; break;
 		case 1200: div_value = ftdi_sio_b1200; break;
@@ -905,7 +941,8 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *po
 		case 115200: div_value = ftdi_sio_b115200; break;
 		} /* baud */
 		if (div_value == 0) {
-			dbg("%s - Baudrate (%d) requested is not supported", __func__,  baud);
+			dbg("%s - Baudrate (%d) requested is not supported",
+							__func__,  baud);
 			div_value = ftdi_sio_b9600;
 			baud = 9600;
 			div_okay = 0;
@@ -915,7 +952,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *po
 		if (baud <= 3000000) {
 			div_value = ftdi_232am_baud_to_divisor(baud);
 		} else {
-	                dbg("%s - Baud rate too high!", __func__);
+			dbg("%s - Baud rate too high!", __func__);
 			baud = 9600;
 			div_value = ftdi_232am_baud_to_divisor(9600);
 			div_okay = 0;
@@ -927,7 +964,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *po
 		if (baud <= 3000000) {
 			div_value = ftdi_232bm_baud_to_divisor(baud);
 		} else {
-	                dbg("%s - Baud rate too high!", __func__);
+			dbg("%s - Baud rate too high!", __func__);
 			div_value = ftdi_232bm_baud_to_divisor(9600);
 			div_okay = 0;
 			baud = 9600;
@@ -942,14 +979,14 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *po
 	}
 
 	tty_encode_baud_rate(tty, baud, baud);
-	return(div_value);
+	return div_value;
 }
 
 static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char *buf;
-        __u16 urb_value;
+	__u16 urb_value;
 	__u16 urb_index;
 	__u32 urb_index_value;
 	int rv;
@@ -978,7 +1015,8 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 
 
 
-static int get_serial_info(struct usb_serial_port * port, struct serial_struct __user * retinfo)
+static int get_serial_info(struct usb_serial_port *port,
+				struct serial_struct __user *retinfo)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct serial_struct tmp;
@@ -996,7 +1034,7 @@ static int get_serial_info(struct usb_serial_port * port, struct serial_struct _
 
 
 static int set_serial_info(struct tty_struct *tty,
-	struct usb_serial_port * port, struct serial_struct __user * newinfo)
+	struct usb_serial_port *port, struct serial_struct __user *newinfo)
 { /* set_serial_info */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct serial_struct new_serial;
@@ -1004,7 +1042,7 @@ static int set_serial_info(struct tty_struct *tty,
 
 	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
 		return -EFAULT;
-	old_priv = * priv;
+	old_priv = *priv;
 
 	/* Do error checking and permission checking */
 
@@ -1025,7 +1063,7 @@ static int set_serial_info(struct tty_struct *tty,
 	/* Make the changes - these are privileged changes! */
 
 	priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
-	               (new_serial.flags & ASYNC_FLAGS));
+					(new_serial.flags & ASYNC_FLAGS));
 	priv->custom_divisor = new_serial.custom_divisor;
 
 	tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
@@ -1079,11 +1117,10 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 		priv->chip_type = FT2232C;
 		/* Determine interface code. */
 		inter = serial->interface->altsetting->desc.bInterfaceNumber;
-		if (inter == 0) {
+		if (inter == 0)
 			priv->interface = PIT_SIOA;
-		} else {
+		else
 			priv->interface = PIT_SIOB;
-		}
 		/* BM-type devices have a bug where bcdDevice gets set
 		 * to 0x200 when iSerialNumber is 0.  */
 		if (version < 0x500) {
@@ -1117,7 +1154,8 @@ static void ftdi_determine_type(struct usb_serial_port *port)
  * ***************************************************************************
  */
 
-static ssize_t show_latency_timer(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_latency_timer(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1126,14 +1164,14 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a
 	int rv = 0;
 
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	rv = usb_control_msg(udev,
 			     usb_rcvctrlpipe(udev, 0),
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
 			     0, priv->interface,
-			     (char*) &latency, 1, WDR_TIMEOUT);
+			     (char *) &latency, 1, WDR_TIMEOUT);
 
 	if (rv < 0) {
 		dev_err(dev, "Unable to read latency timer: %i\n", rv);
@@ -1143,8 +1181,9 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a
 }
 
 /* Write a new value of the latency timer, in units of milliseconds. */
-static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf,
-				   size_t count)
+static ssize_t store_latency_timer(struct device *dev,
+			struct device_attribute *attr, const char *valbuf,
+			size_t count)
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1172,8 +1211,8 @@ static ssize_t store_latency_timer(struct device *dev, struct device_attribute *
 
 /* Write an event character directly to the FTDI register.  The ASCII
    value is in the low 8 bits, with the enable bit in the 9th bit. */
-static ssize_t store_event_char(struct device *dev, struct device_attribute *attr, const char *valbuf,
-				size_t count)
+static ssize_t store_event_char(struct device *dev,
+	struct device_attribute *attr, const char *valbuf, size_t count)
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1199,7 +1238,8 @@ static ssize_t store_event_char(struct device *dev, struct device_attribute *att
 	return count;
 }
 
-static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer);
+static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer,
+							store_latency_timer);
 static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
 
 static int create_sysfs_attrs(struct usb_serial_port *port)
@@ -1207,7 +1247,7 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	/* XXX I've no idea if the original SIO supports the event_char
 	 * sysfs parameter, so I'm playing it safe.  */
@@ -1229,7 +1269,7 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	/* XXX see create_sysfs_attrs */
 	if (priv->chip_type != SIO) {
@@ -1250,9 +1290,11 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
  */
 
 /* Probe function to check for special devices */
-static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id)
+static int ftdi_sio_probe(struct usb_serial *serial,
+					const struct usb_device_id *id)
 {
-	struct ftdi_sio_quirk *quirk = (struct ftdi_sio_quirk *)id->driver_info;
+	struct ftdi_sio_quirk *quirk =
+				(struct ftdi_sio_quirk *)id->driver_info;
 
 	if (quirk && quirk->probe) {
 		int ret = quirk->probe(serial);
@@ -1271,17 +1313,18 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
 
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
-	if (!priv){
-		err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct ftdi_private));
+	if (!priv) {
+		err("%s- kmalloc(%Zd) failed.", __func__,
+					sizeof(struct ftdi_private));
 		return -ENOMEM;
 	}
 
 	spin_lock_init(&priv->rx_lock);
 	spin_lock_init(&priv->tx_lock);
-        init_waitqueue_head(&priv->delta_msr_wait);
+	init_waitqueue_head(&priv->delta_msr_wait);
 	/* This will push the characters through immediately rather
 	   than queue a task to deliver them */
 	priv->flags = ASYNC_LOW_LATENCY;
@@ -1291,9 +1334,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	/* Increase the size of read buffers */
 	kfree(port->bulk_in_buffer);
-	port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL);
+	port->bulk_in_buffer = kmalloc(BUFSZ, GFP_KERNEL);
 	if (!port->bulk_in_buffer) {
-		kfree (priv);
+		kfree(priv);
 		return -ENOMEM;
 	}
 	if (port->read_urb) {
@@ -1306,7 +1349,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	/* Free port's existing write urb and transfer buffer. */
 	if (port->write_urb) {
-		usb_free_urb (port->write_urb);
+		usb_free_urb(port->write_urb);
 		port->write_urb = NULL;
 	}
 	kfree(port->bulk_out_buffer);
@@ -1314,7 +1357,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	usb_set_serial_port_data(port, priv);
 
-	ftdi_determine_type (port);
+	ftdi_determine_type(port);
 	create_sysfs_attrs(port);
 	return 0;
 }
@@ -1322,9 +1365,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 /* Setup for the USB-UIRT device, which requires hardwired
  * baudrate (38400 gets mapped to 312500) */
 /* Called from usbserial:serial_probe */
-static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
+static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
 {
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 77;
@@ -1333,9 +1376,10 @@ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
 
 /* Setup for the HE-TIRA1 device, which requires hardwired
  * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
-static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv)
+
+static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 {
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 240;
@@ -1353,7 +1397,7 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
 	struct usb_device *udev = serial->dev;
 	struct usb_interface *interface = serial->interface;
 
-	dbg("%s",__func__);
+	dbg("%s", __func__);
 
 	if (interface == udev->actconfig->interface[0]) {
 		info("Ignoring serial port reserved for JTAG");
@@ -1387,7 +1431,7 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
  *      calls __serial_close for each open of the port
  *      shutdown is called then (ie ftdi_shutdown)
  */
-static void ftdi_shutdown (struct usb_serial *serial)
+static void ftdi_shutdown(struct usb_serial *serial)
 {
 	dbg("%s", __func__);
 }
@@ -1401,7 +1445,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	remove_sysfs_attrs(port);
 
 	/* all open ports are closed at this point
-         *    (by usbserial.c:__serial_close, which calls ftdi_close)
+	 *    (by usbserial.c:__serial_close, which calls ftdi_close)
 	 */
 
 	if (priv) {
@@ -1462,12 +1506,14 @@ static int ftdi_open(struct tty_struct *tty,
 	/* Start reading from the device */
 	priv->rx_processed = 0;
 	usb_fill_bulk_urb(port->read_urb, dev,
-		      usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
-		      ftdi_read_bulk_callback, port);
+			usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
+			port->read_urb->transfer_buffer,
+				port->read_urb->transfer_buffer_length,
+			ftdi_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
-		err("%s - failed submitting read urb, error %d", __func__, result);
+		err("%s - failed submitting read urb, error %d",
+							__func__, result);
 
 
 	return result;
@@ -1493,7 +1539,7 @@ static void ftdi_close(struct tty_struct *tty,
 	dbg("%s", __func__);
 
 	mutex_lock(&port->serial->disc_mutex);
-	if (c_cflag & HUPCL && !port->serial->disconnected){
+	if (c_cflag & HUPCL && !port->serial->disconnected) {
 		/* Disable flow control */
 		if (usb_control_msg(port->serial->dev,
 				    usb_sndctrlpipe(port->serial->dev, 0),
@@ -1553,7 +1599,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
 
 	data_offset = priv->write_offset;
-        dbg("data_offset set to %d",data_offset);
+	dbg("data_offset set to %d", data_offset);
 
 	/* Determine total transfer size */
 	transfer_size = count;
@@ -1564,7 +1610,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 				 (PKTSZ - data_offset)));
 	}
 
-	buffer = kmalloc (transfer_size, GFP_ATOMIC);
+	buffer = kmalloc(transfer_size, GFP_ATOMIC);
 	if (!buffer) {
 		err("%s ran out of kernel memory for urb ...", __func__);
 		count = -ENOMEM;
@@ -1580,20 +1626,20 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	/* Copy data */
 	if (data_offset > 0) {
-		/* Original sio requires control byte at start of each packet. */
+		/* Original sio requires control byte at start of
+		   each packet. */
 		int user_pktsz = PKTSZ - data_offset;
 		int todo = count;
 		unsigned char *first_byte = buffer;
 		const unsigned char *current_position = buf;
 
 		while (todo > 0) {
-			if (user_pktsz > todo) {
+			if (user_pktsz > todo)
 				user_pktsz = todo;
-			}
 			/* Write the control byte at the front of the packet*/
 			*first_byte = 1 | ((user_pktsz) << 2);
 			/* Copy data for packet */
-			memcpy (first_byte + data_offset,
+			memcpy(first_byte + data_offset,
 				current_position, user_pktsz);
 			first_byte += user_pktsz + data_offset;
 			current_position += user_pktsz;
@@ -1602,20 +1648,23 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	} else {
 		/* No control byte required. */
 		/* Copy in the data to send */
-		memcpy (buffer, buf, count);
+		memcpy(buffer, buf, count);
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, buffer);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						transfer_size, buffer);
 
 	/* fill the buffer and send it */
 	usb_fill_bulk_urb(urb, port->serial->dev,
-		      usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress),
-		      buffer, transfer_size,
-		      ftdi_write_bulk_callback, port);
+			usb_sndbulkpipe(port->serial->dev,
+					port->bulk_out_endpointAddress),
+			buffer, transfer_size,
+			ftdi_write_bulk_callback, port);
 
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
-		err("%s - failed submitting write urb, error %d", __func__, status);
+		err("%s - failed submitting write urb, error %d",
+							__func__, status);
 		count = status;
 		goto error;
 	} else {
@@ -1634,7 +1683,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 error:
 	usb_free_urb(urb);
 error_no_urb:
-	kfree (buffer);
+	kfree(buffer);
 error_no_buffer:
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	priv->tx_outstanding_urbs--;
@@ -1645,7 +1694,7 @@ error_no_buffer:
 
 /* This function may get called when the device is closed */
 
-static void ftdi_write_bulk_callback (struct urb *urb)
+static void ftdi_write_bulk_callback(struct urb *urb)
 {
 	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
@@ -1655,7 +1704,7 @@ static void ftdi_write_bulk_callback (struct urb *urb)
 	int status = urb->status;
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
-	kfree (urb->transfer_buffer);
+	kfree(urb->transfer_buffer);
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -1738,9 +1787,11 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 	int status = urb->status;
 
 	if (urb->number_of_packets > 0) {
-		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__func__,
-		    urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets );
-		err("%s transfer_flags %x ", __func__,urb->transfer_flags );
+		err("%s transfer_buffer_length %d actual_length %d number of packets %d",
+				__func__,
+				urb->transfer_buffer_length,
+				urb->actual_length, urb->number_of_packets);
+		err("%s transfer_flags %x ", __func__, urb->transfer_flags);
 	}
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1750,7 +1801,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 
 	tty = port->port.tty;
 	if (!tty) {
-		dbg("%s - bad tty pointer - exiting",__func__);
+		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
 	}
 
@@ -1760,14 +1811,13 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	if (urb != port->read_urb) {
+	if (urb != port->read_urb)
 		err("%s - Not my urb!", __func__);
-	}
 
 	if (status) {
-		/* This will happen at close every time so it is a dbg not an err */
-		dbg("(this is ok on close) nonzero read bulk status received: "
-		    "%d", status);
+		/* This will happen at close every time so it is a dbg not an
+		   err */
+		dbg("(this is ok on close) nonzero read bulk status received: %d", status);
 		return;
 	}
 
@@ -1783,7 +1833,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 } /* ftdi_read_bulk_callback */
 
 
-static void ftdi_process_read (struct work_struct *work)
+static void ftdi_process_read(struct work_struct *work)
 { /* ftdi_process_read */
 	struct ftdi_private *priv =
 		container_of(work, struct ftdi_private, rx_work.work);
@@ -1806,7 +1856,7 @@ static void ftdi_process_read (struct work_struct *work)
 
 	tty = port->port.tty;
 	if (!tty) {
-		dbg("%s - bad tty pointer - exiting",__func__);
+		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
 	}
 
@@ -1830,11 +1880,11 @@ static void ftdi_process_read (struct work_struct *work)
 				urb->actual_length - priv->rx_processed);
 	} else {
 		/* The first two bytes of every read packet are status */
-		if (urb->actual_length > 2) {
-			usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
-		} else {
-			dbg("Status only: %03oo %03oo",data[0],data[1]);
-		}
+		if (urb->actual_length > 2)
+			usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
+		else
+			dbg("Status only: %03oo %03oo", data[0], data[1]);
 	}
 
 
@@ -1844,16 +1894,19 @@ static void ftdi_process_read (struct work_struct *work)
 	/* if CD is dropped and the line is not CLOCAL then we should hangup */
 
 	need_flip = 0;
-	for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+	for (packet_offset = priv->rx_processed;
+		packet_offset < urb->actual_length; packet_offset += PKTSZ) {
 		int length;
 
-		/* Compare new line status to the old one, signal if different */
-		/* N.B. packet may be processed more than once, but differences
-		 * are only processed once.  */
+		/* Compare new line status to the old one, signal if different/
+		   N.B. packet may be processed more than once, but differences
+		   are only processed once.  */
 		if (priv != NULL) {
-			char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK;
+			char new_status = data[packet_offset + 0] &
+							FTDI_STATUS_B0_MASK;
 			if (new_status != priv->prev_status) {
-				priv->diff_status |= new_status ^ priv->prev_status;
+				priv->diff_status |=
+					new_status ^ priv->prev_status;
 				wake_up_interruptible(&priv->delta_msr_wait);
 				priv->prev_status = new_status;
 			}
@@ -1870,30 +1923,31 @@ static void ftdi_process_read (struct work_struct *work)
 			break;
 		}
 		if (tty_buffer_request_room(tty, length) < length) {
-			/* break out & wait for throttling/unthrottling to happen */
+			/* break out & wait for throttling/unthrottling to
+			   happen */
 			dbg("%s - receive room low", __func__);
 			break;
 		}
 
 		/* Handle errors and break */
 		error_flag = TTY_NORMAL;
-		/* Although the device uses a bitmask and hence can have multiple */
-		/* errors on a packet - the order here sets the priority the */
-		/* error is returned to the tty layer  */
+		/* Although the device uses a bitmask and hence can have
+		   multiple errors on a packet - the order here sets the
+		   priority the error is returned to the tty layer  */
 
-		if ( data[packet_offset+1] & FTDI_RS_OE ) {
+		if (data[packet_offset+1] & FTDI_RS_OE) {
 			error_flag = TTY_OVERRUN;
 			dbg("OVERRRUN error");
 		}
-		if ( data[packet_offset+1] & FTDI_RS_BI ) {
+		if (data[packet_offset+1] & FTDI_RS_BI) {
 			error_flag = TTY_BREAK;
 			dbg("BREAK received");
 		}
-		if ( data[packet_offset+1] & FTDI_RS_PE ) {
+		if (data[packet_offset+1] & FTDI_RS_PE) {
 			error_flag = TTY_PARITY;
 			dbg("PARITY error");
 		}
-		if ( data[packet_offset+1] & FTDI_RS_FE ) {
+		if (data[packet_offset+1] & FTDI_RS_FE) {
 			error_flag = TTY_FRAME;
 			dbg("FRAMING error");
 		}
@@ -1902,7 +1956,8 @@ static void ftdi_process_read (struct work_struct *work)
 				/* Note that the error flag is duplicated for
 				   every character received since we don't know
 				   which character it applied to */
-				tty_insert_flip_char(tty, data[packet_offset+i], error_flag);
+				tty_insert_flip_char(tty,
+					data[packet_offset + i], error_flag);
 			}
 			need_flip = 1;
 		}
@@ -1910,19 +1965,19 @@ static void ftdi_process_read (struct work_struct *work)
 #ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
 		/* if a parity error is detected you get status packets forever
 		   until a character is sent without a parity error.
-		   This doesn't work well since the application receives a never
-		   ending stream of bad data - even though new data hasn't been sent.
-		   Therefore I (bill) have taken this out.
+		   This doesn't work well since the application receives a
+		   never ending stream of bad data - even though new data
+		   hasn't been sent. Therefore I (bill) have taken this out.
 		   However - this might make sense for framing errors and so on
 		   so I am leaving the code in for now.
 		*/
 		else {
-			if (error_flag != TTY_NORMAL){
+			if (error_flag != TTY_NORMAL) {
 				dbg("error_flag is not normal");
-				/* In this case it is just status - if that is an error send a bad character */
-				if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
+				/* In this case it is just status - if that is
+				   an error send a bad character */
+				if (tty->flip.count >= TTY_FLIPBUF_SIZE)
 					tty_flip_buffer_push(tty);
-				}
 				tty_insert_flip_char(tty, 0xff, error_flag);
 				need_flip = 1;
 			}
@@ -1931,9 +1986,8 @@ static void ftdi_process_read (struct work_struct *work)
 	} /* "for(packet_offset=0..." */
 
 	/* Low latency */
-	if (need_flip) {
+	if (need_flip)
 		tty_flip_buffer_push(tty);
-	}
 
 	if (packet_offset < urb->actual_length) {
 		/* not completely processed - record progress */
@@ -1952,12 +2006,11 @@ static void ftdi_process_read (struct work_struct *work)
 		}
 		spin_unlock_irqrestore(&priv->rx_lock, flags);
 		/* if the port is closed stop trying to read */
-		if (port->port.count > 0){
+		if (port->port.count > 0)
 			/* delay processing of remainder */
 			schedule_delayed_work(&priv->rx_work, 1);
-		} else {
+		else
 			dbg("%s - port is closed", __func__);
-		}
 		return;
 	}
 
@@ -1965,19 +2018,20 @@ static void ftdi_process_read (struct work_struct *work)
 	priv->rx_processed = 0;
 
 	/* if the port is closed stop trying to read */
-	if (port->port.count > 0){
+	if (port->port.count > 0) {
 		/* Continue trying to always read  */
 		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			      usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
-			      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
-			      ftdi_read_bulk_callback, port);
+			usb_rcvbulkpipe(port->serial->dev,
+					port->bulk_in_endpointAddress),
+			port->read_urb->transfer_buffer,
+			port->read_urb->transfer_buffer_length,
+			ftdi_read_bulk_callback, port);
 
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
-			err("%s - failed resubmitting read urb, error %d", __func__, result);
+			err("%s - failed resubmitting read urb, error %d",
+							__func__, result);
 	}
-
-	return;
 } /* ftdi_process_read */
 
 
@@ -1992,22 +2046,23 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 	/* see drivers/char/tty_io.c to see it used */
 	/* last_set_data_urb_value NEVER has the break bit set in it */
 
-	if (break_state) {
+	if (break_state)
 		urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
-	} else {
+	else
 		urb_value = priv->last_set_data_urb_value;
-	}
-
 
-	if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
-			    FTDI_SIO_SET_DATA_REQUEST,
-			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
-			    urb_value , priv->interface,
-			    buf, 0, WDR_TIMEOUT) < 0) {
-		err("%s FAILED to enable/disable break state (state was %d)", __func__,break_state);
+	if (usb_control_msg(port->serial->dev,
+			usb_sndctrlpipe(port->serial->dev, 0),
+			FTDI_SIO_SET_DATA_REQUEST,
+			FTDI_SIO_SET_DATA_REQUEST_TYPE,
+			urb_value , priv->interface,
+			buf, 0, WDR_TIMEOUT) < 0) {
+		err("%s FAILED to enable/disable break state (state was %d)",
+							__func__, break_state);
 	}
 
-	dbg("%s break state is %d - urb is %d", __func__,break_state, urb_value);
+	dbg("%s break state is %d - urb is %d", __func__,
+						break_state, urb_value);
 
 }
 
@@ -2027,14 +2082,15 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	__u16 urb_value; /* will hold the new flags */
 	char buf[1]; /* Perhaps I should dynamically alloc this? */
 
-	// Added for xon/xoff support
+	/* Added for xon/xoff support */
 	unsigned int iflag = termios->c_iflag;
 	unsigned char vstop;
 	unsigned char vstart;
 
 	dbg("%s", __func__);
 
-	/* Force baud rate if this device requires it, unless it is set to B0. */
+	/* Force baud rate if this device requires it, unless it is set to
+	   B0. */
 	if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
 		dbg("%s: forcing baud rate for this device", __func__);
 		tty_encode_baud_rate(tty, priv->force_baud,
@@ -2053,8 +2109,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	   not  - so just do the change regardless  - should be able to
 	   compare old_termios and tty->termios */
 	/* NOTE These routines can get interrupted by
-	   ftdi_sio_read_bulk_callback  - need to examine what this
-           means - don't see any problems yet */
+	   ftdi_sio_read_bulk_callback  - need to examine what this means -
+	   don't see any problems yet */
 
 	/* Set number of data bits, parity, stop bits */
 
@@ -2078,8 +2134,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
 		}
 	}
 
-	/* This is needed by the break command since it uses the same command - but is
-	 *  or'ed with this value  */
+	/* This is needed by the break command since it uses the same command
+	   - but is or'ed with this value  */
 	priv->last_set_data_urb_value = urb_value;
 
 	if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -2091,7 +2147,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	}
 
 	/* Now do the baudrate */
-	if ((cflag & CBAUD) == B0 ) {
+	if ((cflag & CBAUD) == B0) {
 		/* Disable flow control */
 		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
@@ -2104,13 +2160,11 @@ static void ftdi_set_termios(struct tty_struct *tty,
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/* set the baudrate determined before */
-		if (change_speed(tty, port)) {
+		if (change_speed(tty, port))
 			err("%s urb failed to set baudrate", __func__);
-		}
 		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
-		if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) {
+		if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
 			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-		}
 	}
 
 	/* Set flow control */
@@ -2130,18 +2184,22 @@ static void ftdi_set_termios(struct tty_struct *tty,
 		/*
 		 * Xon/Xoff code
 		 *
-		 * Check the IXOFF status in the iflag component of the termios structure
-		 * if IXOFF is not set, the pre-xon/xoff code is executed.
-		*/
+		 * Check the IXOFF status in the iflag component of the
+		 * termios structure. If IXOFF is not set, the pre-xon/xoff
+		 * code is executed.
+		 */
 		if (iflag & IXOFF) {
-			dbg("%s  request to enable xonxoff iflag=%04x",__func__,iflag);
-			// Try to enable the XON/XOFF on the ftdi_sio
-			// Set the vstart and vstop -- could have been done up above where
-			// a lot of other dereferencing is done but that would be very
-			// inefficient as vstart and vstop are not always needed
+			dbg("%s  request to enable xonxoff iflag=%04x",
+							__func__, iflag);
+			/* Try to enable the XON/XOFF on the ftdi_sio
+			 * Set the vstart and vstop -- could have been done up
+			 * above where a lot of other dereferencing is done but
+			 * that would be very inefficient as vstart and vstop
+			 * are not always needed.
+			 */
 			vstart = termios->c_cc[VSTART];
 			vstop = termios->c_cc[VSTOP];
-			urb_value=(vstop << 8) | (vstart);
+			urb_value = (vstop << 8) | (vstart);
 
 			if (usb_control_msg(dev,
 					    usb_sndctrlpipe(dev, 0),
@@ -2153,8 +2211,9 @@ static void ftdi_set_termios(struct tty_struct *tty,
 				err("urb failed to set to xon/xoff flow control");
 			}
 		} else {
-			/* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */
-			/* CHECKME Assuming XON/XOFF handled by tty stack - not by device */
+			/* else clause to only run if cflag ! CRTSCTS and iflag
+			 * ! XOFF. CHECKME Assuming XON/XOFF handled by tty
+			 * stack - not by device */
 			dbg("%s Turning off hardware flow control", __func__);
 			if (usb_control_msg(dev,
 					    usb_sndctrlpipe(dev, 0),
@@ -2181,32 +2240,35 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 	switch (priv->chip_type) {
 	case SIO:
 		/* Request the status from the device */
-		if ((ret = usb_control_msg(port->serial->dev,
-					   usb_rcvctrlpipe(port->serial->dev, 0),
-					   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
-					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
-					   0, 0,
-					   buf, 1, WDR_TIMEOUT)) < 0 ) {
+		ret = usb_control_msg(port->serial->dev,
+			   usb_rcvctrlpipe(port->serial->dev, 0),
+			   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
+			   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
+			   0, 0,
+			   buf, 1, WDR_TIMEOUT);
+		if (ret < 0) {
 			err("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
-			return(ret);
+			return ret;
 		}
 		break;
 	case FT8U232AM:
 	case FT232BM:
 	case FT2232C:
 	case FT232RL:
-		/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
-		   format as the data returned from the in point */
-		if ((ret = usb_control_msg(port->serial->dev,
-					   usb_rcvctrlpipe(port->serial->dev, 0),
-					   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
-					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
-					   0, priv->interface,
-					   buf, 2, WDR_TIMEOUT)) < 0 ) {
+		/* the 8U232AM returns a two byte value (the sio is a 1 byte
+		   value) - in the same format as the data returned from the in
+		   point */
+		ret = usb_control_msg(port->serial->dev,
+				   usb_rcvctrlpipe(port->serial->dev, 0),
+				   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
+				   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
+				   0, priv->interface,
+				   buf, 2, WDR_TIMEOUT);
+		if (ret < 0) {
 			err("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
-			return(ret);
+			return ret;
 		}
 		break;
 	default:
@@ -2221,7 +2283,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 		priv->last_dtr_rts;
 }
 
-static int ftdi_tiocmset(struct tty_struct *tty, struct file * file,
+static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -2230,7 +2292,8 @@ static int ftdi_tiocmset(struct tty_struct *tty, struct file * file,
 }
 
 
-static int ftdi_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -2241,10 +2304,12 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file * file, unsigned int c
 	switch (cmd) {
 
 	case TIOCGSERIAL: /* gets serial port data */
-		return get_serial_info(port, (struct serial_struct __user *) arg);
+		return get_serial_info(port,
+					(struct serial_struct __user *) arg);
 
 	case TIOCSSERIAL: /* sets serial port data */
-		return set_serial_info(tty, port, (struct serial_struct __user *) arg);
+		return set_serial_info(tty, port,
+					(struct serial_struct __user *) arg);
 
 	/*
 	 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
@@ -2263,23 +2328,24 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file * file, unsigned int c
 			else {
 				char diff = priv->diff_status;
 
-				if (diff == 0) {
+				if (diff == 0)
 					return -EIO; /* no change => error */
-				}
 
 				/* Consume all events */
 				priv->diff_status = 0;
 
-				/* Return 0 if caller wanted to know about these bits */
-				if ( ((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
-				     ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
-				     ((arg & TIOCM_CD)  && (diff & FTDI_RS0_RLSD)) ||
-				     ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS)) ) {
+				/* Return 0 if caller wanted to know about
+				   these bits */
+				if (((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
+				    ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
+				    ((arg & TIOCM_CD)  && (diff & FTDI_RS0_RLSD)) ||
+				    ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS))) {
 					return 0;
 				}
 				/*
-				 * Otherwise caller can't care less about what happened,
-				 * and so we continue to wait for more events.
+				 * Otherwise caller can't care less about what
+				 * happened,and so we continue to wait for more
+				 * events.
 				 */
 			}
 		}
@@ -2287,8 +2353,8 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file * file, unsigned int c
 	default:
 		break;
 	}
-	/* This is not necessarily an error - turns out the higher layers will do
-	 *  some ioctls itself (see comment above)
+	/* This is not necessarily an error - turns out the higher layers
+	 * will do some ioctls themselves (see comment above)
 	 */
 	dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
 	return -ENOIOCTLCMD;
@@ -2326,7 +2392,7 @@ static void ftdi_unthrottle(struct tty_struct *tty)
 		schedule_delayed_work(&priv->rx_work, 0);
 }
 
-static int __init ftdi_init (void)
+static int __init ftdi_init(void)
 {
 	int retval;
 
@@ -2356,13 +2422,13 @@ failed_sio_register:
 }
 
 
-static void __exit ftdi_exit (void)
+static void __exit ftdi_exit(void)
 {
 
 	dbg("%s", __func__);
 
-	usb_deregister (&ftdi_driver);
-	usb_serial_deregister (&ftdi_sio_device);
+	usb_deregister(&ftdi_driver);
+	usb_serial_deregister(&ftdi_sio_device);
 
 }
 
@@ -2370,8 +2436,8 @@ static void __exit ftdi_exit (void)
 module_init(ftdi_init);
 module_exit(ftdi_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 8302eca893e..a577ea44dcf 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -1,20 +1,20 @@
 /*
- * Definitions for the FTDI USB Single Port Serial Converter - 
- * known as FTDI_SIO (Serial Input/Output application of the chipset) 
+ * Definitions for the FTDI USB Single Port Serial Converter -
+ * known as FTDI_SIO (Serial Input/Output application of the chipset)
  *
  * The example I have is known as the USC-1000 which is available from
  * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
  * http://www.dansdata.com/usbser.htm but I can't be sure There are other
  * USC-1000s which don't look like my device though so beware!
  *
- * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, 
+ * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
  * USB on the other.
  *
  * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details
  * of the protocol required to talk to the device and ongoing assistence
  * during development.
  *
- * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the 
+ * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
  * FTDI_SIO implementation.
  *
  * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
@@ -472,7 +472,7 @@
 /*
  * DSS-20 Sync Station for Sony Ericsson P800
  */
-#define FTDI_DSS20_PID          0xFC82  
+#define FTDI_DSS20_PID          0xFC82
 
 /*
  * Home Electronics (www.home-electro.com) USB gadgets
@@ -884,7 +884,7 @@
 /*
  * BmRequestType:  0100 0000B
  * bRequest:       FTDI_SIO_RESET
- * wValue:         Control Value 
+ * wValue:         Control Value
  *                   0 = Reset SIO
  *                   1 = Purge RX buffer
  *                   2 = Purge TX buffer
@@ -952,7 +952,7 @@
  *   101 - add .625 to divisor
  *   110 - add .750 to divisor
  *   111 - add .875 to divisor
- * Bits 15 to 0 of the 17-bit divisor are placed in the urb value.  Bit 16 is 
+ * Bits 15 to 0 of the 17-bit divisor are placed in the urb value.  Bit 16 is
  * placed in bit 0 of the urb index.
  *
  * Note that there are a couple of special cases to support the highest baud
@@ -971,8 +971,8 @@ typedef enum {
 } ftdi_chip_type_t;
 
 typedef enum {
- ftdi_sio_b300 = 0, 
- ftdi_sio_b600 = 1, 
+ ftdi_sio_b300 = 0,
+ ftdi_sio_b600 = 1,
  ftdi_sio_b1200 = 2,
  ftdi_sio_b2400 = 3,
  ftdi_sio_b4800 = 4,
@@ -981,7 +981,7 @@ typedef enum {
  ftdi_sio_b38400 = 7,
  ftdi_sio_b57600 = 8,
  ftdi_sio_b115200 = 9
-} FTDI_SIO_baudrate_t ;
+} FTDI_SIO_baudrate_t;
 
 /*
  * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
@@ -990,19 +990,19 @@ typedef enum {
 
 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
-#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 )
-#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 )
-#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 )
-#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 )
-#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 )
-#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 )
-#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 )
-#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 )
+#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8)
+#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11)
 #define FTDI_SIO_SET_BREAK (0x1 << 14)
 /* FTDI_SIO_SET_DATA */
 
 /*
- * BmRequestType:  0100 0000B 
+ * BmRequestType:  0100 0000B
  * bRequest:       FTDI_SIO_SET_DATA
  * wValue:         Data characteristics (see below)
  * wIndex:         Port
@@ -1035,7 +1035,7 @@ typedef enum {
 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40
 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL
 
-/* 
+/*
  * BmRequestType:   0100 0000B
  * bRequest:        FTDI_SIO_MODEM_CTRL
  * wValue:          ControlValue (see below)
@@ -1049,11 +1049,11 @@ typedef enum {
  */
 
 #define FTDI_SIO_SET_DTR_MASK 0x1
-#define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK  << 8))
-#define FTDI_SIO_SET_DTR_LOW  ( 0 | ( FTDI_SIO_SET_DTR_MASK  << 8))
+#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK  << 8))
+#define FTDI_SIO_SET_DTR_LOW  (0 | (FTDI_SIO_SET_DTR_MASK  << 8))
 #define FTDI_SIO_SET_RTS_MASK 0x2
-#define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
-#define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
+#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8))
+#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8))
 
 /*
  * ControlValue
@@ -1076,7 +1076,7 @@ typedef enum {
 /* FTDI_SIO_SET_FLOW_CTRL */
 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40
 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL
-#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 
+#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
@@ -1085,7 +1085,7 @@ typedef enum {
  *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
  *   wValue:         Xoff/Xon
  *   wIndex:         Protocol/Port - hIndex is protocl / lIndex is port
- *   wLength:        0 
+ *   wLength:        0
  *   Data:           None
  *
  * hIndex protocol is:
@@ -1101,10 +1101,10 @@ typedef enum {
  *
  * A value of zero in the hIndex field disables handshaking
  *
- * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character 
+ * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character
  * and the lValue field contains the XON character.
- */  
- 
+ */
+
 /*
  * FTDI_SIO_GET_LATENCY_TIMER
  *
@@ -1118,7 +1118,7 @@ typedef enum {
 #define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER
 #define  FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0
 
-/* 
+/*
  *  BmRequestType:   1100 0000b
  *  bRequest:        FTDI_SIO_GET_LATENCY_TIMER
  *  wValue:          0
@@ -1127,7 +1127,7 @@ typedef enum {
  *  Data:            latency (on return)
  */
 
-/* 
+/*
  * FTDI_SIO_SET_LATENCY_TIMER
  *
  * Set the timeout interval. The FTDI collects data from the slave
@@ -1140,7 +1140,7 @@ typedef enum {
 #define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER
 #define  FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40
 
-/* 
+/*
  *  BmRequestType:   0100 0000b
  *  bRequest:        FTDI_SIO_SET_LATENCY_TIMER
  *  wValue:          Latency (milliseconds)
@@ -1155,7 +1155,7 @@ typedef enum {
  */
 
 /*
- * FTDI_SIO_SET_EVENT_CHAR 
+ * FTDI_SIO_SET_EVENT_CHAR
  *
  * Set the special event character for the specified communications port.
  * If the device sees this character it will immediately return the
@@ -1168,7 +1168,7 @@ typedef enum {
 #define  FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40
 
 
-/* 
+/*
  *  BmRequestType:   0100 0000b
  *  bRequest:        FTDI_SIO_SET_EVENT_CHAR
  *  wValue:          EventChar
@@ -1184,12 +1184,12 @@ typedef enum {
  *   B9..15  Reserved
  *
  */
-          
+
 /* FTDI_SIO_SET_ERROR_CHAR */
 
 /* Set the parity error replacement character for the specified communications port */
 
-/* 
+/*
  *  BmRequestType:  0100 0000b
  *  bRequest:       FTDI_SIO_SET_EVENT_CHAR
  *  wValue:         Error Char
@@ -1215,15 +1215,15 @@ typedef enum {
 #define FTDI_SIO_DSR_MASK 0x20
 #define FTDI_SIO_RI_MASK  0x40
 #define FTDI_SIO_RLSD_MASK 0x80
-/* 
+/*
  *   BmRequestType:   1100 0000b
  *   bRequest:        FTDI_SIO_GET_MODEM_STATUS
  *   wValue:          zero
  *   wIndex:          Port
  *   wLength:         1
  *   Data:            Status
- * 
- * One byte of data is returned 
+ *
+ * One byte of data is returned
  * B0..3 0
  * B4    CTS
  *         0 = inactive
@@ -1236,15 +1236,15 @@ typedef enum {
  *         1 = active
  * B7    Receive Line Signal Detect (RLSD)
  *         0 = inactive
- *         1 = active 
+ *         1 = active
  */
 
 
 
-/* Descriptors returned by the device 
- * 
+/* Descriptors returned by the device
+ *
  *  Device Descriptor
- * 
+ *
  * Offset	Field		Size	Value	Description
  * 0	bLength		1	0x12	Size of descriptor in bytes
  * 1	bDescriptorType	1	0x01	DEVICE Descriptor Type
@@ -1260,9 +1260,9 @@ typedef enum {
  * 15	iProduct	1	0x02	Index of prod string desc
  * 16	iSerialNumber	1	0x02	Index of serial nmr string desc
  * 17	bNumConfigurations 1    0x01	Number of possible configurations
- * 
+ *
  * Configuration Descriptor
- * 
+ *
  * Offset	Field			Size	Value
  * 0	bLength			1	0x09	Size of descriptor in bytes
  * 1	bDescriptorType		1	0x02	CONFIGURATION Descriptor Type
@@ -1272,9 +1272,9 @@ typedef enum {
  * 6	iConfiguration		1	0x02	Index of config string descriptor
  * 7	bmAttributes		1	0x20	Config characteristics Remote Wakeup
  * 8	MaxPower		1	0x1E	Max power consumption
- * 
+ *
  * Interface Descriptor
- * 
+ *
  * Offset	Field			Size	Value
  * 0	bLength			1	0x09	Size of descriptor in bytes
  * 1	bDescriptorType		1	0x04	INTERFACE Descriptor Type
@@ -1285,9 +1285,9 @@ typedef enum {
  * 6	bInterfaceSubClass	1	0xFF	Subclass Code
  * 7	bInterfaceProtocol	1	0xFF	Protocol Code
  * 8	iInterface		1	0x02	Index of interface string description
- * 
+ *
  * IN Endpoint Descriptor
- * 
+ *
  * Offset	Field			Size	Value
  * 0	bLength			1	0x07	Size of descriptor in bytes
  * 1	bDescriptorType		1	0x05	ENDPOINT descriptor type
@@ -1295,9 +1295,9 @@ typedef enum {
  * 3	bmAttributes		1	0x02	Endpoint attributes - Bulk
  * 4	bNumEndpoints		2	0x0040	maximum packet size
  * 5	bInterval		1	0x00	Interval for polling endpoint
- * 
+ *
  * OUT Endpoint Descriptor
- * 
+ *
  * Offset	Field			Size	Value
  * 0	bLength			1	0x07	Size of descriptor in bytes
  * 1	bDescriptorType		1	0x05	ENDPOINT descriptor type
@@ -1305,17 +1305,17 @@ typedef enum {
  * 3	bmAttributes		1	0x02	Endpoint attributes - Bulk
  * 4	bNumEndpoints		2	0x0040	maximum packet size
  * 5	bInterval		1	0x00	Interval for polling endpoint
- *     
+ *
  * DATA FORMAT
- * 
+ *
  * IN Endpoint
- * 
+ *
  * The device reserves the first two bytes of data on this endpoint to contain the current
  * values of the modem and line status registers. In the absence of data, the device 
  * generates a message consisting of these two status bytes every 40 ms
- * 
+ *
  * Byte 0: Modem Status
- * 
+ *
  * Offset	Description
  * B0	Reserved - must be 1
  * B1	Reserved - must be 0
@@ -1325,9 +1325,9 @@ typedef enum {
  * B5	Data Set Ready (DSR)
  * B6	Ring Indicator (RI)
  * B7	Receive Line Signal Detect (RLSD)
- * 
+ *
  * Byte 1: Line Status
- * 
+ *
  * Offset	Description
  * B0	Data Ready (DR)
  * B1	Overrun Error (OE)
@@ -1337,7 +1337,7 @@ typedef enum {
  * B5	Transmitter Holding Register (THRE)
  * B6	Transmitter Empty (TEMT)
  * B7	Error in RCVR FIFO
- * 
+ *
  */
 #define FTDI_RS0_CTS	(1 << 4)
 #define FTDI_RS0_DSR	(1 << 5)
@@ -1355,17 +1355,17 @@ typedef enum {
 
 /*
  * OUT Endpoint
- * 
+ *
  * This device reserves the first bytes of data on this endpoint contain the length
  * and port identifier of the message. For the FTDI USB Serial converter the port 
  * identifier is always 1.
- * 
+ *
  * Byte 0: Line Status
- * 
+ *
  * Offset	Description
  * B0	Reserved - must be 1
  * B1	Reserved - must be 0
  * B2..7	Length of message - (not including Byte 0)
- * 
+ *
  */
 
-- 
cgit v1.2.3


From 64701e8122fff3605c674c056749864c97485de4 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:11:34 +0100
Subject: funsoft: Switch to linux/uaccess

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/funsoft.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index e8ba2cb5995..d30f736d2cc 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -14,7 +14,7 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 static int debug;
 
-- 
cgit v1.2.3


From af6d780b578778d442278ac4894ff10847bebae2 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:11:44 +0100
Subject: garmin_gps: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/garmin_gps.c | 354 ++++++++++++++++++++--------------------
 1 file changed, 176 insertions(+), 178 deletions(-)

diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 06cfa43c6f0..2e663f1afd5 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -33,7 +33,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/atomic.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
@@ -44,7 +44,7 @@
 static int initial_mode = 1;
 
 /* debug flag */
-static int debug = 0;
+static int debug;
 
 #define GARMIN_VENDOR_ID             0x091E
 
@@ -56,7 +56,7 @@ static int debug = 0;
 #define VERSION_MINOR	31
 
 #define _STR(s) #s
-#define _DRIVER_VERSION(a,b) "v" _STR(a) "." _STR(b)
+#define _DRIVER_VERSION(a, b) "v" _STR(a) "." _STR(b)
 #define DRIVER_VERSION _DRIVER_VERSION(VERSION_MAJOR, VERSION_MINOR)
 #define DRIVER_AUTHOR "hermann kneissel"
 #define DRIVER_DESC "garmin gps driver"
@@ -65,37 +65,37 @@ static int debug = 0;
 #define EINVPKT	1000	/* invalid packet structure */
 
 
-// size of the header of a packet using the usb protocol
+/* size of the header of a packet using the usb protocol */
 #define GARMIN_PKTHDR_LENGTH	12
 
-// max. possible size of a packet using the serial protocol 
-#define MAX_SERIAL_PKT_SIZ (3+255+3)
+/* max. possible size of a packet using the serial protocol */
+#define MAX_SERIAL_PKT_SIZ (3 + 255 + 3)
 
-// max. possible size of a packet with worst case stuffing
-#define MAX_SERIAL_PKT_SIZ_STUFFED MAX_SERIAL_PKT_SIZ+256
+/*  max. possible size of a packet with worst case stuffing */
+#define MAX_SERIAL_PKT_SIZ_STUFFED (MAX_SERIAL_PKT_SIZ + 256)
 
-// size of a buffer able to hold a complete (no stuffing) packet
-// (the document protocol does not contain packets with a larger
-//  size, but in theory a packet may be 64k+12 bytes - if in
-//  later protocol versions larger packet sizes occur, this value
-//  should be increased accordingly, so the input buffer is always 
-//  large enough the store a complete packet inclusive header)
-#define GPS_IN_BUFSIZ  (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ) 
+/* size of a buffer able to hold a complete (no stuffing) packet
+ * (the document protocol does not contain packets with a larger
+ *  size, but in theory a packet may be 64k+12 bytes - if in
+ *  later protocol versions larger packet sizes occur, this value
+ *  should be increased accordingly, so the input buffer is always
+ *  large enough the store a complete packet inclusive header) */
+#define GPS_IN_BUFSIZ  (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ)
 
-// size of a buffer able to hold a complete (incl. stuffing) packet
-#define GPS_OUT_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ_STUFFED) 
+/* size of a buffer able to hold a complete (incl. stuffing) packet */
+#define GPS_OUT_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ_STUFFED)
 
-// where to place the packet id of a serial packet, so we can
-// prepend the usb-packet header without the need to move the
-// packets data
+/* where to place the packet id of a serial packet, so we can
+ * prepend the usb-packet header without the need to move the
+ * packets data */
 #define GSP_INITIAL_OFFSET (GARMIN_PKTHDR_LENGTH-2)
 
-// max. size of incoming private packets (header+1 param)
+/* max. size of incoming private packets (header+1 param) */
 #define PRIVPKTSIZ (GARMIN_PKTHDR_LENGTH+4)
 
 #define GARMIN_LAYERID_TRANSPORT  0
 #define GARMIN_LAYERID_APPL      20
-// our own layer-id to use for some control mechanisms
+/* our own layer-id to use for some control mechanisms */
 #define GARMIN_LAYERID_PRIVATE	0x01106E4B
 
 #define GARMIN_PKTID_PVT_DATA	51
@@ -103,7 +103,7 @@ static int debug = 0;
 
 #define CMND_ABORT_TRANSFER 0
 
-// packet ids used in private layer
+/* packet ids used in private layer */
 #define PRIV_PKTID_SET_DEBUG	1
 #define PRIV_PKTID_SET_MODE	2
 #define PRIV_PKTID_INFO_REQ	3
@@ -121,7 +121,8 @@ static int debug = 0;
 struct garmin_packet {
 	struct list_head  list;
 	int               seq;
-	int               size; // the real size of the data array, always > 0
+	/* the real size of the data array, always > 0 */
+	int               size;
 	__u8              data[1];
 };
 
@@ -164,7 +165,7 @@ struct garmin_data {
 #define MODE_NATIVE          0
 #define MODE_GARMIN_SERIAL   1
 
-// Flags used in garmin_data.flags:
+/* Flags used in garmin_data.flags: */
 #define FLAGS_SESSION_REPLY_MASK  0x00C0
 #define FLAGS_SESSION_REPLY1_SEEN 0x0080
 #define FLAGS_SESSION_REPLY2_SEEN 0x0040
@@ -185,7 +186,7 @@ struct garmin_data {
 
 
 /* function prototypes */
-static void gsp_next_packet(struct garmin_data * garmin_data_p);
+static void gsp_next_packet(struct garmin_data *garmin_data_p);
 static int  garmin_write_bulk(struct usb_serial_port *port,
 			     const unsigned char *buf, int count,
 			     int dismiss_ack);
@@ -217,12 +218,13 @@ static unsigned char const PRIVATE_REQ[]
 
 
 static struct usb_device_id id_table [] = {
-	/* the same device id seems to be used by all usb enabled gps devices */
-	{ USB_DEVICE(GARMIN_VENDOR_ID, 3 ) },
+	/* the same device id seems to be used by all
+	   usb enabled GPS devices */
+	{ USB_DEVICE(GARMIN_VENDOR_ID, 3) },
 	{ }					/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver garmin_driver = {
 	.name =		"garmin_gps",
@@ -233,9 +235,10 @@ static struct usb_driver garmin_driver = {
 };
 
 
-static inline int noResponseFromAppLayer(struct garmin_data * garmin_data_p)
+static inline int noResponseFromAppLayer(struct garmin_data *garmin_data_p)
 {
-	return atomic_read(&garmin_data_p->req_count) == atomic_read(&garmin_data_p->resp_count);
+	return atomic_read(&garmin_data_p->req_count) ==
+				atomic_read(&garmin_data_p->resp_count);
 }
 
 
@@ -261,10 +264,10 @@ static inline int getDataLength(const __u8 *usbPacket)
  */
 static inline int isAbortTrfCmnd(const unsigned char *buf)
 {
-	if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ, 
-	                sizeof(GARMIN_STOP_TRANSFER_REQ)) ||
-	    0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2, 
-	                sizeof(GARMIN_STOP_TRANSFER_REQ_V2)))
+	if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
+					sizeof(GARMIN_STOP_TRANSFER_REQ)) ||
+	    0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
+					sizeof(GARMIN_STOP_TRANSFER_REQ_V2)))
 		return 1;
 	else
 		return 0;
@@ -279,7 +282,7 @@ static void send_to_tty(struct usb_serial_port *port,
 
 	if (tty && actual_length) {
 
-		usb_serial_debug_data(debug, &port->dev, 
+		usb_serial_debug_data(debug, &port->dev,
 					__func__, actual_length, data);
 
 		tty_buffer_request_room(tty, actual_length);
@@ -296,7 +299,7 @@ static void send_to_tty(struct usb_serial_port *port,
 /*
  * queue a received (usb-)packet for later processing
  */
-static int pkt_add(struct garmin_data * garmin_data_p,
+static int pkt_add(struct garmin_data *garmin_data_p,
 		   unsigned char *data, unsigned int data_length)
 {
 	int state = 0;
@@ -307,7 +310,7 @@ static int pkt_add(struct garmin_data * garmin_data_p,
 	/* process only packets containg data ... */
 	if (data_length) {
 		pkt = kmalloc(sizeof(struct garmin_packet)+data_length,
-		              GFP_ATOMIC);
+								GFP_ATOMIC);
 		if (pkt == NULL) {
 			dev_err(&garmin_data_p->port->dev, "out of memory\n");
 			return 0;
@@ -325,16 +328,15 @@ static int pkt_add(struct garmin_data * garmin_data_p,
 
 		/* in serial mode, if someone is waiting for data from
 		   the device, iconvert and send the next packet to tty. */
-		if (result && (state == STATE_GSP_WAIT_DATA)) {
+		if (result && (state == STATE_GSP_WAIT_DATA))
 			gsp_next_packet(garmin_data_p);
-		}
 	}
 	return result;
 }
 
 
 /* get the next pending packet */
-static struct garmin_packet *pkt_pop(struct garmin_data * garmin_data_p)
+static struct garmin_packet *pkt_pop(struct garmin_data *garmin_data_p)
 {
 	unsigned long flags;
 	struct garmin_packet *result = NULL;
@@ -350,7 +352,7 @@ static struct garmin_packet *pkt_pop(struct garmin_data * garmin_data_p)
 
 
 /* free up all queued data */
-static void pkt_clear(struct garmin_data * garmin_data_p)
+static void pkt_clear(struct garmin_data *garmin_data_p)
 {
 	unsigned long flags;
 	struct garmin_packet *result = NULL;
@@ -372,7 +374,7 @@ static void pkt_clear(struct garmin_data * garmin_data_p)
  ******************************************************************************/
 
 /* send an ack packet back to the tty */
-static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id)
+static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
 {
 	__u8 pkt[10];
 	__u8 cksum = 0;
@@ -391,9 +393,8 @@ static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id)
 	*ptr++ = pkt_id;
 	cksum += pkt_id;
 
-	if (pkt_id == DLE) {
+	if (pkt_id == DLE)
 		*ptr++ = DLE;
-	}
 
 	*ptr++ = 0;
 	*ptr++ = 0xFF & (-cksum);
@@ -415,12 +416,12 @@ static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id)
  * at GSP_INITIAL_OFFSET.
  *
  * count - number of bytes in the input buffer including space reserved for
- *         the usb header: GSP_INITIAL_OFFSET + number of bytes in packet 
+ *         the usb header: GSP_INITIAL_OFFSET + number of bytes in packet
  *         (including pkt-id, data-length a. cksum)
  */
-static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count)
+static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
 {
-	const __u8* recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET;
+	const __u8 *recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET;
 	__le32 *usbdata = (__le32 *) garmin_data_p->inbuffer;
 
 	int cksum = 0;
@@ -440,8 +441,8 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count)
 	cksum += *recpkt++;
 	cksum += *recpkt++;
 
-	// sanity check, remove after test ...
-	if ((__u8*)&(usbdata[3]) != recpkt) {
+	/* sanity check, remove after test ... */
+	if ((__u8 *)&(usbdata[3]) != recpkt) {
 		dbg("%s - ptr mismatch %p - %p",
 			__func__, &(usbdata[4]), recpkt);
 		return -EINVPKT;
@@ -462,7 +463,7 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count)
 	usbdata[1] = __cpu_to_le32(pktid);
 	usbdata[2] = __cpu_to_le32(size);
 
-	garmin_write_bulk (garmin_data_p->port, garmin_data_p->inbuffer,
+	garmin_write_bulk(garmin_data_p->port, garmin_data_p->inbuffer,
 			   GARMIN_PKTHDR_LENGTH+size, 0);
 
 	/* if this was an abort-transfer command, flush all
@@ -495,7 +496,7 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count)
  * if the input is an abort command, drop all queued data.
  */
 
-static int gsp_receive(struct garmin_data * garmin_data_p,
+static int gsp_receive(struct garmin_data *garmin_data_p,
 		       const unsigned char *buf, int count)
 {
 	unsigned long flags;
@@ -504,10 +505,11 @@ static int gsp_receive(struct garmin_data * garmin_data_p,
 	int i = 0;
 	__u8 *dest;
 	int size;
-	// dleSeen: set if last byte read was a DLE
+	/* dleSeen: set if last byte read was a DLE */
 	int dleSeen;
-	// skip: if set, skip incoming data until possible start of
-	//       new packet
+	/* skip: if set, skip incoming data until possible start of
+	 *       new packet
+	 */
 	int skip;
 	__u8 data;
 
@@ -521,14 +523,13 @@ static int gsp_receive(struct garmin_data * garmin_data_p,
 	dbg("%s - dle=%d skip=%d size=%d count=%d",
 		__func__, dleSeen, skip, size, count);
 
-	if (size == 0) {
+	if (size == 0)
 		size = GSP_INITIAL_OFFSET;
-	}
 
 	while (offs < count) {
 
 		data = *(buf+offs);
-		offs ++;
+		offs++;
 
 		if (data == DLE) {
 			if (skip) { /* start of a new pkt */
@@ -554,9 +555,8 @@ static int gsp_receive(struct garmin_data * garmin_data_p,
 					ack_or_nak_seen = NAK;
 					dbg("NAK packet complete.");
 				} else {
-					dbg("packet complete "
-						        "- id=0x%X.",
-						        0xFF & data);
+					dbg("packet complete - id=0x%X.",
+						0xFF & data);
 					gsp_rec_packet(garmin_data_p, size);
 				}
 
@@ -589,7 +589,7 @@ static int gsp_receive(struct garmin_data * garmin_data_p,
 
 	garmin_data_p->insize = size;
 
-	// copy flags back to structure
+	/* copy flags back to structure */
 	if (skip)
 		garmin_data_p->flags |= FLAGS_GSP_SKIP;
 	else
@@ -600,16 +600,13 @@ static int gsp_receive(struct garmin_data * garmin_data_p,
 	else
 		garmin_data_p->flags &= ~FLAGS_GSP_DLESEEN;
 
-	if (ack_or_nak_seen) {
+	if (ack_or_nak_seen)
 		garmin_data_p->state = STATE_GSP_WAIT_DATA;
-	}
 
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
-	if (ack_or_nak_seen) {
+	if (ack_or_nak_seen)
 		gsp_next_packet(garmin_data_p);
-	}
-
 	return count;
 }
 
@@ -623,7 +620,7 @@ static int gsp_receive(struct garmin_data * garmin_data_p,
  *
  * return <0 on error, 0 if packet is incomplete or > 0 if packet was sent
  */
-static int gsp_send(struct garmin_data * garmin_data_p,
+static int gsp_send(struct garmin_data *garmin_data_p,
 		    const unsigned char *buf, int count)
 {
 	const unsigned char *src;
@@ -631,11 +628,11 @@ static int gsp_send(struct garmin_data * garmin_data_p,
 	int pktid = 0;
 	int datalen = 0;
 	int cksum = 0;
-	int i=0;
+	int i = 0;
 	int k;
 
 	dbg("%s - state %d - %d bytes.", __func__,
-	         garmin_data_p->state, count);
+					garmin_data_p->state, count);
 
 	k = garmin_data_p->outsize;
 	if ((k+count) > GPS_OUT_BUFSIZ) {
@@ -650,7 +647,7 @@ static int gsp_send(struct garmin_data * garmin_data_p,
 
 	if (k >= GARMIN_PKTHDR_LENGTH) {
 		pktid  = getPacketId(garmin_data_p->outbuffer);
-		datalen= getDataLength(garmin_data_p->outbuffer);
+		datalen = getDataLength(garmin_data_p->outbuffer);
 		i = GARMIN_PKTHDR_LENGTH + datalen;
 		if (k < i)
 			return 0;
@@ -658,19 +655,18 @@ static int gsp_send(struct garmin_data * garmin_data_p,
 		return 0;
 	}
 
-	dbg("%s - %d bytes in buffer, %d bytes in pkt.", __func__,
-	         k, i);
+	dbg("%s - %d bytes in buffer, %d bytes in pkt.", __func__, k, i);
 
 	/* garmin_data_p->outbuffer now contains a complete packet */
 
 	usb_serial_debug_data(debug, &garmin_data_p->port->dev,
-		                   __func__, k, garmin_data_p->outbuffer);
+				__func__, k, garmin_data_p->outbuffer);
 
 	garmin_data_p->outsize = 0;
 
 	if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) {
-		dbg("not an application packet (%d)", 
-		        getLayerId(garmin_data_p->outbuffer));
+		dbg("not an application packet (%d)",
+				getLayerId(garmin_data_p->outbuffer));
 		return -1;
 	}
 
@@ -688,14 +684,14 @@ static int gsp_send(struct garmin_data * garmin_data_p,
 
 	k = 0;
 	src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH;
-	for (i=0; i<datalen; i++) {
+	for (i = 0; i < datalen; i++) {
 		if (*src++ == DLE)
 			k++;
 	}
 
 	src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH;
 	if (k > (GARMIN_PKTHDR_LENGTH-2)) {
-		/* can't add stuffing DLEs in place, move data to end 
+		/* can't add stuffing DLEs in place, move data to end
 		   of buffer ... */
 		dst = garmin_data_p->outbuffer+GPS_OUT_BUFSIZ-datalen;
 		memcpy(dst, src, datalen);
@@ -712,14 +708,14 @@ static int gsp_send(struct garmin_data * garmin_data_p,
 	if (datalen == DLE)
 		*dst++ = DLE;
 
-	for (i=0; i<datalen; i++) {
+	for (i = 0; i < datalen; i++) {
 		__u8 c = *src++;
 		*dst++ = c;
 		cksum += c;
 		if (c == DLE)
 			*dst++ = DLE;
 	}
-		
+
 	cksum = 0xFF & -cksum;
 	*dst++ = cksum;
 	if (cksum == DLE)
@@ -744,7 +740,7 @@ static int gsp_send(struct garmin_data * garmin_data_p,
 /*
  * Process the next pending data packet - if there is one
  */
-static void gsp_next_packet(struct garmin_data * garmin_data_p)
+static void gsp_next_packet(struct garmin_data *garmin_data_p)
 {
 	struct garmin_packet *pkt = NULL;
 
@@ -774,17 +770,17 @@ static void gsp_next_packet(struct garmin_data * garmin_data_p)
  * buf contains the data read, it may span more than one packet
  * or even incomplete packets
  */
-static int nat_receive(struct garmin_data * garmin_data_p,
+static int nat_receive(struct garmin_data *garmin_data_p,
 		       const unsigned char *buf, int count)
 {
 	unsigned long flags;
-	__u8 * dest;
+	__u8 *dest;
 	int offs = 0;
 	int result = count;
 	int len;
 
 	while (offs < count) {
-		// if buffer contains header, copy rest of data
+		/* if buffer contains header, copy rest of data */
 		if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH)
 			len = GARMIN_PKTHDR_LENGTH
 			      +getDataLength(garmin_data_p->inbuffer);
@@ -792,9 +788,9 @@ static int nat_receive(struct garmin_data * garmin_data_p,
 			len = GARMIN_PKTHDR_LENGTH;
 
 		if (len >= GPS_IN_BUFSIZ) {
-			/* seem to be an invalid packet, ignore rest of input */
-			dbg("%s - packet size too large: %d",
-			        __func__, len);
+			/* seems to be an invalid packet, ignore rest
+			   of input */
+			dbg("%s - packet size too large: %d", __func__, len);
 			garmin_data_p->insize = 0;
 			count = 0;
 			result = -EINVPKT;
@@ -804,7 +800,7 @@ static int nat_receive(struct garmin_data * garmin_data_p,
 				len = (count-offs);
 			if (len > 0) {
 				dest = garmin_data_p->inbuffer
-				       	+garmin_data_p->insize;
+						+ garmin_data_p->insize;
 				memcpy(dest, buf+offs, len);
 				garmin_data_p->insize += len;
 				offs += len;
@@ -816,17 +812,19 @@ static int nat_receive(struct garmin_data * garmin_data_p,
 			len = GARMIN_PKTHDR_LENGTH+
 			   getDataLength(garmin_data_p->inbuffer);
 			if (garmin_data_p->insize >= len) {
-				garmin_write_bulk (garmin_data_p->port,
-				                   garmin_data_p->inbuffer,
-				                   len, 0);
+				garmin_write_bulk(garmin_data_p->port,
+						   garmin_data_p->inbuffer,
+						   len, 0);
 				garmin_data_p->insize = 0;
 
 				/* if this was an abort-transfer command,
 				   flush all queued data. */
 				if (isAbortTrfCmnd(garmin_data_p->inbuffer)) {
-					spin_lock_irqsave(&garmin_data_p->lock, flags);
+					spin_lock_irqsave(&garmin_data_p->lock,
+									flags);
 					garmin_data_p->flags |= FLAGS_DROP_DATA;
-					spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+					spin_unlock_irqrestore(
+						&garmin_data_p->lock, flags);
 					pkt_clear(garmin_data_p);
 				}
 			}
@@ -842,7 +840,7 @@ static int nat_receive(struct garmin_data * garmin_data_p,
 
 static void priv_status_resp(struct usb_serial_port *port)
 {
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	__le32 *pkt = (__le32 *)garmin_data_p->privpkt;
 
 	pkt[0] = __cpu_to_le32(GARMIN_LAYERID_PRIVATE);
@@ -852,7 +850,7 @@ static void priv_status_resp(struct usb_serial_port *port)
 	pkt[4] = __cpu_to_le32(garmin_data_p->mode);
 	pkt[5] = __cpu_to_le32(garmin_data_p->serial_num);
 
-	send_to_tty(port, (__u8*)pkt, 6*4);
+	send_to_tty(port, (__u8 *)pkt, 6 * 4);
 }
 
 
@@ -864,7 +862,7 @@ static int process_resetdev_request(struct usb_serial_port *port)
 {
 	unsigned long flags;
 	int status;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
 	spin_lock_irqsave(&garmin_data_p->lock, flags);
 	garmin_data_p->flags &= ~(CLEAR_HALT_REQUIRED);
@@ -872,8 +870,8 @@ static int process_resetdev_request(struct usb_serial_port *port)
 	garmin_data_p->serial_num = 0;
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
-	usb_kill_urb (port->interrupt_in_urb);
-	dbg("%s - usb_reset_device", __func__ );
+	usb_kill_urb(port->interrupt_in_urb);
+	dbg("%s - usb_reset_device", __func__);
 	status = usb_reset_device(port->serial->dev);
 	if (status)
 		dbg("%s - usb_reset_device failed: %d",
@@ -886,7 +884,7 @@ static int process_resetdev_request(struct usb_serial_port *port)
 /*
  * clear all cached data
  */
-static int garmin_clear(struct garmin_data * garmin_data_p)
+static int garmin_clear(struct garmin_data *garmin_data_p)
 {
 	unsigned long flags;
 	int status = 0;
@@ -896,8 +894,7 @@ static int garmin_clear(struct garmin_data * garmin_data_p)
 	if (port != NULL && atomic_read(&garmin_data_p->resp_count)) {
 		/* send a terminate command */
 		status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ,
-		                           sizeof(GARMIN_STOP_TRANSFER_REQ),
-					   1);
+					sizeof(GARMIN_STOP_TRANSFER_REQ), 1);
 	}
 
 	/* flush all queued data */
@@ -920,28 +917,26 @@ static int garmin_init_session(struct usb_serial_port *port)
 {
 	unsigned long flags;
 	struct usb_serial *serial = port->serial;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	int status = 0;
 
 	if (status == 0) {
-		usb_kill_urb (port->interrupt_in_urb);
+		usb_kill_urb(port->interrupt_in_urb);
 
 		dbg("%s - adding interrupt input", __func__);
 		port->interrupt_in_urb->dev = serial->dev;
 		status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (status)
 			dev_err(&serial->dev->dev,
-			        "%s - failed submitting interrupt urb,"
-				" error %d\n",
-			        __func__, status);
+			  "%s - failed submitting interrupt urb, error %d\n",
+							__func__, status);
 	}
 
 	if (status == 0) {
 		dbg("%s - starting session ...", __func__);
 		garmin_data_p->state = STATE_ACTIVE;
 		status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ,
-		                           sizeof(GARMIN_START_SESSION_REQ),
-					   0);
+					sizeof(GARMIN_START_SESSION_REQ), 0);
 
 		if (status >= 0) {
 
@@ -951,14 +946,14 @@ static int garmin_init_session(struct usb_serial_port *port)
 
 			/* not needed, but the win32 driver does it too ... */
 			status = garmin_write_bulk(port,
-						   GARMIN_START_SESSION_REQ2,
-			                           sizeof(GARMIN_START_SESSION_REQ2),
-						   0);
+					GARMIN_START_SESSION_REQ2,
+					sizeof(GARMIN_START_SESSION_REQ2), 0);
 			if (status >= 0) {
 				status = 0;
 				spin_lock_irqsave(&garmin_data_p->lock, flags);
 				garmin_data_p->ignorePkts++;
-				spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+				spin_unlock_irqrestore(&garmin_data_p->lock,
+									flags);
 			}
 		}
 	}
@@ -970,12 +965,12 @@ static int garmin_init_session(struct usb_serial_port *port)
 
 
 
-static int garmin_open (struct tty_struct *tty,
+static int garmin_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
 	unsigned long flags;
 	int status = 0;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -996,8 +991,8 @@ static int garmin_open (struct tty_struct *tty,
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
 	/* shutdown any bulk reads that might be going on */
-	usb_kill_urb (port->write_urb);
-	usb_kill_urb (port->read_urb);
+	usb_kill_urb(port->write_urb);
+	usb_kill_urb(port->read_urb);
 
 	if (garmin_data_p->state == STATE_RESET)
 		status = garmin_init_session(port);
@@ -1008,10 +1003,10 @@ static int garmin_open (struct tty_struct *tty,
 
 
 static void garmin_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
 	dbg("%s - port %d - mode=%d state=%d flags=0x%X", __func__,
 		port->number, garmin_data_p->mode,
@@ -1025,8 +1020,8 @@ static void garmin_close(struct tty_struct *tty,
 		garmin_clear(garmin_data_p);
 
 	/* shutdown our urbs */
-	usb_kill_urb (port->read_urb);
-	usb_kill_urb (port->write_urb);
+	usb_kill_urb(port->read_urb);
+	usb_kill_urb(port->write_urb);
 
 	if (!port->serial->disconnected) {
 		if (noResponseFromAppLayer(garmin_data_p) ||
@@ -1042,20 +1037,22 @@ static void garmin_close(struct tty_struct *tty,
 	mutex_unlock(&port->serial->disc_mutex);
 }
 
-static void garmin_write_bulk_callback (struct urb *urb)
+static void garmin_write_bulk_callback(struct urb *urb)
 {
 	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
 	int status = urb->status;
 
 	if (port) {
-		struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+		struct garmin_data *garmin_data_p =
+					usb_get_serial_port_data(port);
 
 		dbg("%s - port %d", __func__, port->number);
 
 		if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)
 		    && (garmin_data_p->mode == MODE_GARMIN_SERIAL))  {
-			gsp_send_ack(garmin_data_p, ((__u8 *)urb->transfer_buffer)[4]);
+			gsp_send_ack(garmin_data_p,
+					((__u8 *)urb->transfer_buffer)[4]);
 		}
 
 		if (status) {
@@ -1069,20 +1066,21 @@ static void garmin_write_bulk_callback (struct urb *urb)
 		usb_serial_port_softint(port);
 	}
 
-	/* Ignore errors that resulted from garmin_write_bulk with dismiss_ack=1 */
+	/* Ignore errors that resulted from garmin_write_bulk with
+	   dismiss_ack = 1 */
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
-	kfree (urb->transfer_buffer);
+	kfree(urb->transfer_buffer);
 }
 
 
-static int garmin_write_bulk (struct usb_serial_port *port,
+static int garmin_write_bulk(struct usb_serial_port *port,
 			      const unsigned char *buf, int count,
 			      int dismiss_ack)
 {
 	unsigned long flags;
 	struct usb_serial *serial = port->serial;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	struct urb *urb;
 	unsigned char *buffer;
 	int status;
@@ -1094,7 +1092,7 @@ static int garmin_write_bulk (struct usb_serial_port *port,
 	garmin_data_p->flags &= ~FLAGS_DROP_DATA;
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
-	buffer = kmalloc (count, GFP_ATOMIC);
+	buffer = kmalloc(count, GFP_ATOMIC);
 	if (!buffer) {
 		dev_err(&port->dev, "out of memory\n");
 		return -ENOMEM;
@@ -1103,17 +1101,17 @@ static int garmin_write_bulk (struct usb_serial_port *port,
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
 		dev_err(&port->dev, "no more free urbs\n");
-		kfree (buffer);
+		kfree(buffer);
 		return -ENOMEM;
 	}
 
-	memcpy (buffer, buf, count);
+	memcpy(buffer, buf, count);
 
 	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
 
-	usb_fill_bulk_urb (urb, serial->dev,
-			 	usb_sndbulkpipe (serial->dev,
-				port->bulk_out_endpointAddress),
+	usb_fill_bulk_urb(urb, serial->dev,
+				usb_sndbulkpipe(serial->dev,
+					port->bulk_out_endpointAddress),
 				buffer, count,
 				garmin_write_bulk_callback,
 				dismiss_ack ? NULL : port);
@@ -1131,24 +1129,23 @@ static int garmin_write_bulk (struct usb_serial_port *port,
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		dev_err(&port->dev,
-		        "%s - usb_submit_urb(write bulk) "
-		        "failed with status = %d\n",
+		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
 				__func__, status);
 		count = status;
 	}
 
 	/* we are done with this urb, so let the host driver
 	 * really free it when it is finished with it */
-	usb_free_urb (urb);
+	usb_free_urb(urb);
 
 	return count;
 }
 
-static int garmin_write (struct tty_struct *tty, struct usb_serial_port *port,
+static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
 					 const unsigned char *buf, int count)
 {
 	int pktid, pktsiz, len;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	__le32 *privpkt = (__le32 *)garmin_data_p->privpkt;
 
 	usb_serial_debug_data(debug, &port->dev, __func__, count, buf);
@@ -1165,15 +1162,16 @@ static int garmin_write (struct tty_struct *tty, struct usb_serial_port *port,
 		pktid  = getPacketId(garmin_data_p->privpkt);
 
 		if (count == (GARMIN_PKTHDR_LENGTH+pktsiz)
-		    && GARMIN_LAYERID_PRIVATE == getLayerId(garmin_data_p->privpkt)) {
+		    && GARMIN_LAYERID_PRIVATE ==
+				getLayerId(garmin_data_p->privpkt)) {
 
 			dbg("%s - processing private request %d",
 				__func__, pktid);
 
-			// drop all unfinished transfers
+			/* drop all unfinished transfers */
 			garmin_clear(garmin_data_p);
 
-			switch(pktid) {
+			switch (pktid) {
 
 			case PRIV_PKTID_SET_DEBUG:
 				if (pktsiz != 4)
@@ -1228,25 +1226,25 @@ static int garmin_write_room(struct tty_struct *tty)
 	/*
 	 * Report back the bytes currently available in the output buffer.
 	 */
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	return GPS_OUT_BUFSIZ-garmin_data_p->outsize;
 }
 
 
-static void garmin_read_process(struct garmin_data * garmin_data_p,
+static void garmin_read_process(struct garmin_data *garmin_data_p,
 				 unsigned char *data, unsigned data_length)
 {
 	if (garmin_data_p->flags & FLAGS_DROP_DATA) {
 		/* abort-transfer cmd is actice */
 		dbg("%s - pkt dropped", __func__);
 	} else if (garmin_data_p->state != STATE_DISCONNECTED &&
-	           garmin_data_p->state != STATE_RESET ) {
+		garmin_data_p->state != STATE_RESET) {
 
 		/* remember any appl.layer packets, so we know
 		   if a reset is required or not when closing
 		   the device */
 		if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY,
-		                sizeof(GARMIN_APP_LAYER_REPLY))) {
+				sizeof(GARMIN_APP_LAYER_REPLY))) {
 			atomic_inc(&garmin_data_p->resp_count);
 		}
 
@@ -1256,9 +1254,8 @@ static void garmin_read_process(struct garmin_data * garmin_data_p,
 		if (garmin_data_p->flags & FLAGS_QUEUING) {
 			pkt_add(garmin_data_p, data, data_length);
 		} else if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
-			if (getLayerId(data) == GARMIN_LAYERID_APPL) {
+			if (getLayerId(data) == GARMIN_LAYERID_APPL)
 				pkt_add(garmin_data_p, data, data_length);
-			}
 		} else {
 			send_to_tty(garmin_data_p->port, data, data_length);
 		}
@@ -1266,12 +1263,12 @@ static void garmin_read_process(struct garmin_data * garmin_data_p,
 }
 
 
-static void garmin_read_bulk_callback (struct urb *urb)
+static void garmin_read_bulk_callback(struct urb *urb)
 {
 	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
 	struct usb_serial *serial =  port->serial;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	unsigned char *data = urb->transfer_buffer;
 	int status = urb->status;
 	int retval;
@@ -1289,7 +1286,7 @@ static void garmin_read_bulk_callback (struct urb *urb)
 		return;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, 
+	usb_serial_debug_data(debug, &port->dev,
 				__func__, urb->actual_length, data);
 
 	garmin_read_process(garmin_data_p, data, urb->actual_length);
@@ -1323,13 +1320,13 @@ static void garmin_read_bulk_callback (struct urb *urb)
 }
 
 
-static void garmin_read_int_callback (struct urb *urb)
+static void garmin_read_int_callback(struct urb *urb)
 {
 	unsigned long flags;
 	int retval;
 	struct usb_serial_port *port = urb->context;
 	struct usb_serial *serial = port->serial;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	unsigned char *data = urb->transfer_buffer;
 	int status = urb->status;
 
@@ -1355,30 +1352,31 @@ static void garmin_read_int_callback (struct urb *urb)
 
 	if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) &&
 	    0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
-		        sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) {
+				sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) {
 
 		dbg("%s - bulk data available.", __func__);
 
 		if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
 
 			/* bulk data available */
-			usb_fill_bulk_urb (port->read_urb, serial->dev,
-					usb_rcvbulkpipe (serial->dev,
-					port->bulk_in_endpointAddress),
+			usb_fill_bulk_urb(port->read_urb, serial->dev,
+					usb_rcvbulkpipe(serial->dev,
+						port->bulk_in_endpointAddress),
 					port->read_urb->transfer_buffer,
 					port->read_urb->transfer_buffer_length,
 					garmin_read_bulk_callback, port);
 			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 			if (retval) {
 				dev_err(&port->dev,
-					"%s - failed submitting read urb, error %d\n",
-				__func__, retval);
+				 "%s - failed submitting read urb, error %d\n",
+							__func__, retval);
 			} else {
 				spin_lock_irqsave(&garmin_data_p->lock, flags);
 				garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE;
 				/* do not send this packet to the user */
 				garmin_data_p->ignorePkts = 1;
-				spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+				spin_unlock_irqrestore(&garmin_data_p->lock,
+									flags);
 			}
 		} else {
 			/* bulk-in transfer still active */
@@ -1389,15 +1387,15 @@ static void garmin_read_int_callback (struct urb *urb)
 
 	} else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY))
 			 && 0 == memcmp(data, GARMIN_START_SESSION_REPLY,
-			                sizeof(GARMIN_START_SESSION_REPLY))) {
+					sizeof(GARMIN_START_SESSION_REPLY))) {
 
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN;
 		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
 		/* save the serial number */
-		garmin_data_p->serial_num 
-			= __le32_to_cpup((__le32*)(data+GARMIN_PKTHDR_LENGTH));
+		garmin_data_p->serial_num = __le32_to_cpup(
+					(__le32 *)(data+GARMIN_PKTHDR_LENGTH));
 
 		dbg("%s - start-of-session reply seen - serial %u.",
 			__func__, garmin_data_p->serial_num);
@@ -1416,7 +1414,7 @@ static void garmin_read_int_callback (struct urb *urb)
 	}
 
 	port->interrupt_in_urb->dev = port->serial->dev;
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		dev_err(&urb->dev->dev,
 			"%s - Error %d submitting interrupt urb\n",
@@ -1429,7 +1427,7 @@ static void garmin_read_int_callback (struct urb *urb)
  * and then sets a timer to call itself again until all queued data
  * is sent.
  */
-static int garmin_flush_queue(struct garmin_data * garmin_data_p)
+static int garmin_flush_queue(struct garmin_data *garmin_data_p)
 {
 	unsigned long flags;
 	struct garmin_packet *pkt;
@@ -1454,7 +1452,7 @@ static int garmin_flush_queue(struct garmin_data * garmin_data_p)
 static void garmin_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1466,10 +1464,10 @@ static void garmin_throttle(struct tty_struct *tty)
 }
 
 
-static void garmin_unthrottle (struct tty_struct *tty)
+static void garmin_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	unsigned long flags;
 	int status;
 
@@ -1513,7 +1511,7 @@ static int garmin_attach(struct usb_serial *serial)
 {
 	int status = 0;
 	struct usb_serial_port *port = serial->port[0];
-	struct garmin_data * garmin_data_p = NULL;
+	struct garmin_data *garmin_data_p = NULL;
 
 	dbg("%s", __func__);
 
@@ -1525,7 +1523,7 @@ static int garmin_attach(struct usb_serial *serial)
 	init_timer(&garmin_data_p->timer);
 	spin_lock_init(&garmin_data_p->lock);
 	INIT_LIST_HEAD(&garmin_data_p->pktlist);
-	//garmin_data_p->timer.expires = jiffies + session_timeout;
+	/* garmin_data_p->timer.expires = jiffies + session_timeout; */
 	garmin_data_p->timer.data = (unsigned long)garmin_data_p;
 	garmin_data_p->timer.function = timeout_handler;
 	garmin_data_p->port = port;
@@ -1542,13 +1540,13 @@ static int garmin_attach(struct usb_serial *serial)
 static void garmin_shutdown(struct usb_serial *serial)
 {
 	struct usb_serial_port *port = serial->port[0];
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
 	dbg("%s", __func__);
 
-	usb_kill_urb (port->interrupt_in_urb);
+	usb_kill_urb(port->interrupt_in_urb);
 	del_timer_sync(&garmin_data_p->timer);
-	kfree (garmin_data_p);
+	kfree(garmin_data_p);
 	usb_set_serial_port_data(port, NULL);
 }
 
@@ -1578,7 +1576,7 @@ static struct usb_serial_driver garmin_device = {
 
 
 
-static int __init garmin_init (void)
+static int __init garmin_init(void)
 {
 	int retval;
 
@@ -1598,10 +1596,10 @@ failed_garmin_register:
 }
 
 
-static void __exit garmin_exit (void)
+static void __exit garmin_exit(void)
 {
-	usb_deregister (&garmin_driver);
-	usb_serial_deregister (&garmin_device);
+	usb_deregister(&garmin_driver);
+	usb_serial_deregister(&garmin_device);
 }
 
 
@@ -1610,8 +1608,8 @@ static void __exit garmin_exit (void)
 module_init(garmin_init);
 module_exit(garmin_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IWUSR | S_IRUGO);
-- 
cgit v1.2.3


From ae64387a54fd519d68aa7d1aacba095140f1a647 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:11:55 +0100
Subject: tty-usb-generic: Code cleanup

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/generic.c | 87 +++++++++++++++++++++++++-------------------
 1 file changed, 49 insertions(+), 38 deletions(-)

diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 5128018c276..fe84c88ec20 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -18,7 +18,7 @@
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 
 static int debug;
@@ -81,7 +81,7 @@ static int generic_probe(struct usb_interface *interface,
 }
 #endif
 
-int usb_serial_generic_register (int _debug)
+int usb_serial_generic_register(int _debug)
 {
 	int retval = 0;
 
@@ -89,10 +89,11 @@ int usb_serial_generic_register (int _debug)
 #ifdef CONFIG_USB_SERIAL_GENERIC
 	generic_device_ids[0].idVendor = vendor;
 	generic_device_ids[0].idProduct = product;
-	generic_device_ids[0].match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
+	generic_device_ids[0].match_flags =
+		USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
 
 	/* register our generic driver with ourselves */
-	retval = usb_serial_register (&usb_serial_generic_device);
+	retval = usb_serial_register(&usb_serial_generic_device);
 	if (retval)
 		goto exit;
 	retval = usb_register(&generic_driver);
@@ -103,12 +104,12 @@ exit:
 	return retval;
 }
 
-void usb_serial_generic_deregister (void)
+void usb_serial_generic_deregister(void)
 {
 #ifdef CONFIG_USB_SERIAL_GENERIC
 	/* remove our generic driver */
 	usb_deregister(&generic_driver);
-	usb_serial_deregister (&usb_serial_generic_device);
+	usb_serial_deregister(&usb_serial_generic_device);
 #endif
 }
 
@@ -121,9 +122,9 @@ int usb_serial_generic_open(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* force low_latency on so that our tty_push actually forces the data through, 
-	   otherwise it is scheduled, and with high data rates (like with OHCI) data
-	   can get lost. */
+	/* force low_latency on so that our tty_push actually forces the data
+	   through, otherwise it is scheduled, and with high data rates (like
+	   with OHCI) data can get lost. */
 	if (tty)
 		tty->low_latency = 1;
 
@@ -136,8 +137,9 @@ int usb_serial_generic_open(struct tty_struct *tty,
 	/* if we have a bulk endpoint, start reading from it */
 	if (serial->num_bulk_in) {
 		/* Start reading from the device */
-		usb_fill_bulk_urb (port->read_urb, serial->dev,
-				   usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
+		usb_fill_bulk_urb(port->read_urb, serial->dev,
+				   usb_rcvbulkpipe(serial->dev,
+						port->bulk_in_endpointAddress),
 				   port->read_urb->transfer_buffer,
 				   port->read_urb->transfer_buffer_length,
 				   ((serial->type->read_bulk_callback) ?
@@ -146,7 +148,9 @@ int usb_serial_generic_open(struct tty_struct *tty,
 				   port);
 		result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (result)
-			dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
+			dev_err(&port->dev,
+			    "%s - failed resubmitting read urb, error %d\n",
+							__func__, result);
 	}
 
 	return result;
@@ -194,10 +198,10 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 }
 
 void usb_serial_generic_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
-	generic_cleanup (port);
+	generic_cleanup(port);
 }
 
 int usb_serial_generic_write(struct tty_struct *tty,
@@ -211,7 +215,7 @@ int usb_serial_generic_write(struct tty_struct *tty,
 
 	if (count == 0) {
 		dbg("%s - write request of 0 bytes", __func__);
-		return (0);
+		return 0;
 	}
 
 	/* only do something if we have a bulk out endpoint */
@@ -226,27 +230,32 @@ int usb_serial_generic_write(struct tty_struct *tty,
 		port->write_urb_busy = 1;
 		spin_unlock_irqrestore(&port->lock, flags);
 
-		count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
+		count = (count > port->bulk_out_size) ?
+					port->bulk_out_size : count;
 
-		memcpy (port->write_urb->transfer_buffer, buf, count);
+		memcpy(port->write_urb->transfer_buffer, buf, count);
 		data = port->write_urb->transfer_buffer;
 		usb_serial_debug_data(debug, &port->dev, __func__, count, data);
 
 		/* set up our urb */
-		usb_fill_bulk_urb (port->write_urb, serial->dev,
-				   usb_sndbulkpipe (serial->dev,
-						    port->bulk_out_endpointAddress),
+		usb_fill_bulk_urb(port->write_urb, serial->dev,
+				   usb_sndbulkpipe(serial->dev,
+					port->bulk_out_endpointAddress),
 				   port->write_urb->transfer_buffer, count,
-				   ((serial->type->write_bulk_callback) ? 
+				   ((serial->type->write_bulk_callback) ?
 				     serial->type->write_bulk_callback :
-				     usb_serial_generic_write_bulk_callback), port);
+				     usb_serial_generic_write_bulk_callback),
+				   port);
 
 		/* send the data out the bulk port */
 		port->write_urb_busy = 1;
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result) {
-			dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
-			/* don't have to grab the lock here, as we will retry if != 0 */
+			dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d\n",
+							__func__, result);
+			/* don't have to grab the lock here, as we will
+			   retry if != 0 */
 			port->write_urb_busy = 0;
 		} else
 			result = count;
@@ -258,7 +267,7 @@ int usb_serial_generic_write(struct tty_struct *tty,
 	return 0;
 }
 
-int usb_serial_generic_write_room (struct tty_struct *tty)
+int usb_serial_generic_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
@@ -302,17 +311,19 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
 	int result;
 
 	/* Continue reading from device */
-	usb_fill_bulk_urb (urb, serial->dev,
-			   usb_rcvbulkpipe (serial->dev,
-				   	    port->bulk_in_endpointAddress),
+	usb_fill_bulk_urb(urb, serial->dev,
+			   usb_rcvbulkpipe(serial->dev,
+					port->bulk_in_endpointAddress),
 			   urb->transfer_buffer,
 			   urb->transfer_buffer_length,
-			   ((serial->type->read_bulk_callback) ? 
-			     serial->type->read_bulk_callback : 
+			   ((serial->type->read_bulk_callback) ?
+			     serial->type->read_bulk_callback :
 			     usb_serial_generic_read_bulk_callback), port);
 	result = usb_submit_urb(urb, mem_flags);
 	if (result)
-		dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+							__func__, result);
 }
 
 /* Push data to tty layer and resubmit the bulk read URB */
@@ -349,16 +360,17 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
 
 	/* Throttle the device if requested by tty */
 	spin_lock_irqsave(&port->lock, flags);
-	if (!(port->throttled = port->throttle_req)) {
+	port->throttled = port->throttle_req;
+	if (!port->throttled) {
 		spin_unlock_irqrestore(&port->lock, flags);
 		flush_and_resubmit_read_urb(port);
-	} else {
+	} else
 		spin_unlock_irqrestore(&port->lock, flags);
-	}
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
@@ -413,15 +425,14 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
 	}
 }
 
-void usb_serial_generic_shutdown (struct usb_serial *serial)
+void usb_serial_generic_shutdown(struct usb_serial *serial)
 {
 	int i;
 
 	dbg("%s", __func__);
 
 	/* stop reads and writes on all ports */
-	for (i=0; i < serial->num_ports; ++i) {
+	for (i = 0; i < serial->num_ports; ++i)
 		generic_cleanup(serial->port[i]);
-	}
 }
 
-- 
cgit v1.2.3


From 3a262b2ea7c0905026c0be3618dba1f825e5387a Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:12:05 +0100
Subject: tty-usb-hp4x: Fix overlong line

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/hp4x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 75b88b356eb..ab905869e95 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -9,7 +9,8 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  */
 
 #include <linux/kernel.h>
-- 
cgit v1.2.3


From d60d43965e46674b9097b422336a55c6ca08559a Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:12:15 +0100
Subject: tty-usb-visor: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/visor.c | 340 +++++++++++++++++++++++++--------------------
 1 file changed, 191 insertions(+), 149 deletions(-)

diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 373a3c7ea77..cf8924f9a2c 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -9,7 +9,8 @@
  *	modify it under the terms of the GNU General Public License version
  *	2 as published by the Free Software Foundation.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  */
 
@@ -23,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "visor.h"
@@ -35,23 +36,29 @@
 #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
 
 /* function prototypes for a handspring visor */
-static int  visor_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void visor_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int  visor_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  visor_write_room	(struct tty_struct *tty);
-static void visor_throttle	(struct tty_struct *tty);
-static void visor_unthrottle	(struct tty_struct *tty);
-static int  visor_probe		(struct usb_serial *serial, const struct usb_device_id *id);
+static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filp);
+static void visor_close(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filp);
+static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count);
+static int  visor_write_room(struct tty_struct *tty);
+static void visor_throttle(struct tty_struct *tty);
+static void visor_unthrottle(struct tty_struct *tty);
+static int  visor_probe(struct usb_serial *serial,
+					const struct usb_device_id *id);
 static int  visor_calc_num_ports(struct usb_serial *serial);
-static void visor_shutdown	(struct usb_serial *serial);
-static void visor_write_bulk_callback	(struct urb *urb);
-static void visor_read_bulk_callback	(struct urb *urb);
-static void visor_read_int_callback	(struct urb *urb);
-static int  clie_3_5_startup	(struct usb_serial *serial);
-static int  treo_attach		(struct usb_serial *serial);
-static int clie_5_attach (struct usb_serial *serial);
-static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id);
-static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id);
+static void visor_shutdown(struct usb_serial *serial);
+static void visor_write_bulk_callback(struct urb *urb);
+static void visor_read_bulk_callback(struct urb *urb);
+static void visor_read_int_callback(struct urb *urb);
+static int  clie_3_5_startup(struct usb_serial *serial);
+static int  treo_attach(struct usb_serial *serial);
+static int clie_5_attach(struct usb_serial *serial);
+static int palm_os_3_probe(struct usb_serial *serial,
+					const struct usb_device_id *id);
+static int palm_os_4_probe(struct usb_serial *serial,
+					const struct usb_device_id *id);
 
 /* Parameters that may be passed into the module. */
 static int debug;
@@ -103,13 +110,13 @@ static struct usb_device_id id_table [] = {
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
-	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), 
+	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
-	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), 
+	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
-	{ USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID), 
+	{ USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
@@ -168,7 +175,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ }					/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver visor_driver = {
 	.name =		"visor",
@@ -178,7 +185,8 @@ static struct usb_driver visor_driver = {
 	.no_dynamic_id = 	1,
 };
 
-/* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */
+/* All of the device info needed for the Handspring Visor,
+   and Palm 4.0 devices */
 static struct usb_serial_driver handspring_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -266,7 +274,8 @@ static int stats;
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
-static int visor_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp)
+static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	struct visor_private *priv = usb_get_serial_port_data(port);
@@ -296,39 +305,41 @@ static int visor_open (struct tty_struct *tty, struct usb_serial_port *port, str
 		tty->low_latency = 1;
 
 	/* Start reading from the device */
-	usb_fill_bulk_urb (port->read_urb, serial->dev,
-			   usb_rcvbulkpipe (serial->dev, 
+	usb_fill_bulk_urb(port->read_urb, serial->dev,
+			   usb_rcvbulkpipe(serial->dev,
 					    port->bulk_in_endpointAddress),
 			   port->read_urb->transfer_buffer,
 			   port->read_urb->transfer_buffer_length,
 			   visor_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result) {
-		dev_err(&port->dev, "%s - failed submitting read urb, error %d\n",
-			__func__, result);
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
 		goto exit;
 	}
-	
+
 	if (port->interrupt_in_urb) {
 		dbg("%s - adding interrupt input for treo", __func__);
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (result)
-			dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n",
-				__func__, result);
+			dev_err(&port->dev,
+			    "%s - failed submitting interrupt urb, error %d\n",
+							__func__, result);
 	}
-exit:	
+exit:
 	return result;
 }
 
 
 static void visor_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
 
 	dbg("%s - port %d", __func__, port->number);
-			 
+
 	/* shutdown our urbs */
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
@@ -336,14 +347,14 @@ static void visor_close(struct tty_struct *tty,
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected) {
 		/* Try to send shutdown message, unless the device is gone */
-		transfer_buffer =  kmalloc (0x12, GFP_KERNEL);
+		transfer_buffer =  kmalloc(0x12, GFP_KERNEL);
 		if (transfer_buffer) {
-			usb_control_msg (port->serial->dev,
+			usb_control_msg(port->serial->dev,
 					 usb_rcvctrlpipe(port->serial->dev, 0),
 					 VISOR_CLOSE_NOTIFICATION, 0xc2,
 					 0x0000, 0x0000,
 					 transfer_buffer, 0x12, 300);
-			kfree (transfer_buffer);
+			kfree(transfer_buffer);
 		}
 	}
 	mutex_unlock(&port->serial->disc_mutex);
@@ -375,7 +386,7 @@ static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 	priv->outstanding_urbs++;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	buffer = kmalloc (count, GFP_ATOMIC);
+	buffer = kmalloc(count, GFP_ATOMIC);
 	if (!buffer) {
 		dev_err(&port->dev, "out of memory\n");
 		count = -ENOMEM;
@@ -389,21 +400,22 @@ static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 		goto error_no_urb;
 	}
 
-	memcpy (buffer, buf, count);
+	memcpy(buffer, buf, count);
 
 	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
 
-	usb_fill_bulk_urb (urb, serial->dev,
-			   usb_sndbulkpipe (serial->dev,
+	usb_fill_bulk_urb(urb, serial->dev,
+			   usb_sndbulkpipe(serial->dev,
 					    port->bulk_out_endpointAddress),
-			   buffer, count, 
+			   buffer, count,
 			   visor_write_bulk_callback, port);
 
 	/* send it down the pipe */
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
-		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n",
-			__func__, status);
+		dev_err(&port->dev,
+		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
+							__func__, status);
 		count = status;
 		goto error;
 	} else {
@@ -429,7 +441,7 @@ error_no_buffer:
 }
 
 
-static int visor_write_room (struct tty_struct *tty)
+static int visor_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
@@ -455,7 +467,7 @@ static int visor_write_room (struct tty_struct *tty)
 }
 
 
-static void visor_write_bulk_callback (struct urb *urb)
+static void visor_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct visor_private *priv = usb_get_serial_port_data(port);
@@ -463,7 +475,7 @@ static void visor_write_bulk_callback (struct urb *urb)
 	unsigned long flags;
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
-	kfree (urb->transfer_buffer);
+	kfree(urb->transfer_buffer);
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -479,7 +491,7 @@ static void visor_write_bulk_callback (struct urb *urb)
 }
 
 
-static void visor_read_bulk_callback (struct urb *urb)
+static void visor_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct visor_private *priv = usb_get_serial_port_data(port);
@@ -497,11 +509,13 @@ static void visor_read_bulk_callback (struct urb *urb)
 		return;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
 
 	tty = port->port.tty;
 	if (tty && urb->actual_length) {
-		available_room = tty_buffer_request_room(tty, urb->actual_length);
+		available_room = tty_buffer_request_room(tty,
+							urb->actual_length);
 		if (available_room) {
 			tty_insert_flip_string(tty, data, available_room);
 			tty_flip_buffer_push(tty);
@@ -515,22 +529,23 @@ static void visor_read_bulk_callback (struct urb *urb)
 
 	/* Continue trying to always read if we should */
 	if (!priv->throttled) {
-		usb_fill_bulk_urb (port->read_urb, port->serial->dev,
+		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 				   usb_rcvbulkpipe(port->serial->dev,
-						   port->bulk_in_endpointAddress),
+					   port->bulk_in_endpointAddress),
 				   port->read_urb->transfer_buffer,
 				   port->read_urb->transfer_buffer_length,
 				   visor_read_bulk_callback, port);
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
-			dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
-	} else {
+			dev_err(&port->dev,
+			    "%s - failed resubmitting read urb, error %d\n",
+							__func__, result);
+	} else
 		priv->actually_throttled = 1;
-	}
 	spin_unlock(&priv->lock);
 }
 
-static void visor_read_int_callback (struct urb *urb)
+static void visor_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	int status = urb->status;
@@ -564,13 +579,14 @@ static void visor_read_int_callback (struct urb *urb)
 			      urb->actual_length, urb->transfer_buffer);
 
 exit:
-	result = usb_submit_urb (urb, GFP_ATOMIC);
+	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result)
-		dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n",
-			__func__, result);
+		dev_err(&urb->dev->dev,
+				"%s - Error %d submitting interrupt urb\n",
+							__func__, result);
 }
 
-static void visor_throttle (struct tty_struct *tty)
+static void visor_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
@@ -583,7 +599,7 @@ static void visor_throttle (struct tty_struct *tty)
 }
 
 
-static void visor_unthrottle (struct tty_struct *tty)
+static void visor_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
@@ -599,10 +615,13 @@ static void visor_unthrottle (struct tty_struct *tty)
 	port->read_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	if (result)
-		dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
 }
 
-static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id)
+static int palm_os_3_probe(struct usb_serial *serial,
+						const struct usb_device_id *id)
 {
 	struct device *dev = &serial->dev->dev;
 	struct visor_connection_info *connection_info;
@@ -614,7 +633,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
 
 	dbg("%s", __func__);
 
-	transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL);
+	transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
 	if (!transfer_buffer) {
 		dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
 			sizeof(*connection_info));
@@ -622,7 +641,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
 	}
 
 	/* send a get connection info request */
-	retval = usb_control_msg (serial->dev,
+	retval = usb_control_msg(serial->dev,
 				  usb_rcvctrlpipe(serial->dev, 0),
 				  VISOR_GET_CONNECTION_INFORMATION,
 				  0xc2, 0x0000, 0x0000, transfer_buffer,
@@ -634,29 +653,31 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
 	}
 
 	if (retval == sizeof(*connection_info)) {
-	        connection_info = (struct visor_connection_info *)transfer_buffer;
+			connection_info = (struct visor_connection_info *)
+							transfer_buffer;
 
 		num_ports = le16_to_cpu(connection_info->num_ports);
 		for (i = 0; i < num_ports; ++i) {
-			switch (connection_info->connections[i].port_function_id) {
-				case VISOR_FUNCTION_GENERIC:
-					string = "Generic";
-					break;
-				case VISOR_FUNCTION_DEBUGGER:
-					string = "Debugger";
-					break;
-				case VISOR_FUNCTION_HOTSYNC:
-					string = "HotSync";
-					break;
-				case VISOR_FUNCTION_CONSOLE:
-					string = "Console";
-					break;
-				case VISOR_FUNCTION_REMOTE_FILE_SYS:
-					string = "Remote File System";
-					break;
-				default:
-					string = "unknown";
-					break;
+			switch (
+			   connection_info->connections[i].port_function_id) {
+			case VISOR_FUNCTION_GENERIC:
+				string = "Generic";
+				break;
+			case VISOR_FUNCTION_DEBUGGER:
+				string = "Debugger";
+				break;
+			case VISOR_FUNCTION_HOTSYNC:
+				string = "HotSync";
+				break;
+			case VISOR_FUNCTION_CONSOLE:
+				string = "Console";
+				break;
+			case VISOR_FUNCTION_REMOTE_FILE_SYS:
+				string = "Remote File System";
+				break;
+			default:
+				string = "unknown";
+				break;
 			}
 			dev_info(dev, "%s: port %d, is for %s use\n",
 				serial->type->description,
@@ -667,11 +688,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
 	* Handle devices that report invalid stuff here.
 	*/
 	if (num_ports == 0 || num_ports > 2) {
-		dev_warn (dev, "%s: No valid connect info available\n",
+		dev_warn(dev, "%s: No valid connect info available\n",
 			serial->type->description);
 		num_ports = 2;
 	}
-  
+
 	dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
 		num_ports);
 
@@ -681,8 +702,9 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
 	 */
 	usb_set_serial_data(serial, (void *)(long)num_ports);
 
-	/* ask for the number of bytes available, but ignore the response as it is broken */
-	retval = usb_control_msg (serial->dev,
+	/* ask for the number of bytes available, but ignore the
+	   response as it is broken */
+	retval = usb_control_msg(serial->dev,
 				  usb_rcvctrlpipe(serial->dev, 0),
 				  VISOR_REQUEST_BYTES_AVAILABLE,
 				  0xc2, 0x0000, 0x0005, transfer_buffer,
@@ -693,12 +715,13 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
 	retval = 0;
 
 exit:
-	kfree (transfer_buffer);
+	kfree(transfer_buffer);
 
 	return retval;
 }
 
-static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id)
+static int palm_os_4_probe(struct usb_serial *serial,
+						const struct usb_device_id *id)
 {
 	struct device *dev = &serial->dev->dev;
 	struct palm_ext_connection_info *connection_info;
@@ -707,18 +730,18 @@ static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_i
 
 	dbg("%s", __func__);
 
-	transfer_buffer =  kmalloc (sizeof (*connection_info), GFP_KERNEL);
+	transfer_buffer =  kmalloc(sizeof(*connection_info), GFP_KERNEL);
 	if (!transfer_buffer) {
 		dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
 			sizeof(*connection_info));
 		return -ENOMEM;
 	}
 
-	retval = usb_control_msg (serial->dev,
-				  usb_rcvctrlpipe(serial->dev, 0), 
+	retval = usb_control_msg(serial->dev,
+				  usb_rcvctrlpipe(serial->dev, 0),
 				  PALM_GET_EXT_CONNECTION_INFORMATION,
 				  0xc2, 0x0000, 0x0000, transfer_buffer,
-				  sizeof (*connection_info), 300);
+				  sizeof(*connection_info), 300);
 	if (retval < 0)
 		dev_err(dev, "%s - error %d getting connection info\n",
 			__func__, retval);
@@ -726,15 +749,17 @@ static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_i
 		usb_serial_debug_data(debug, &serial->dev->dev, __func__,
 				      retval, transfer_buffer);
 
-	kfree (transfer_buffer);
+	kfree(transfer_buffer);
 	return 0;
 }
 
 
-static int visor_probe (struct usb_serial *serial, const struct usb_device_id *id)
+static int visor_probe(struct usb_serial *serial,
+					const struct usb_device_id *id)
 {
 	int retval = 0;
-	int (*startup) (struct usb_serial *serial, const struct usb_device_id *id);
+	int (*startup)(struct usb_serial *serial,
+					const struct usb_device_id *id);
 
 	dbg("%s", __func__);
 
@@ -752,7 +777,7 @@ static int visor_probe (struct usb_serial *serial, const struct usb_device_id *i
 	return retval;
 }
 
-static int visor_calc_num_ports (struct usb_serial *serial)
+static int visor_calc_num_ports(struct usb_serial *serial)
 {
 	int num_ports = (int)(long)(usb_get_serial_data(serial));
 
@@ -769,7 +794,7 @@ static int generic_startup(struct usb_serial *serial)
 	int i;
 
 	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc (sizeof(*priv), GFP_KERNEL);
+		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 		if (!priv) {
 			while (i-- != 0) {
 				priv = usb_get_serial_port_data(ports[i]);
@@ -784,7 +809,7 @@ static int generic_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static int clie_3_5_startup (struct usb_serial *serial)
+static int clie_3_5_startup(struct usb_serial *serial)
 {
 	struct device *dev = &serial->dev->dev;
 	int result;
@@ -797,62 +822,72 @@ static int clie_3_5_startup (struct usb_serial *serial)
 	 */
 
 	/* get the config number */
-	result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				  USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
 				  0, 0, &data, 1, 3000);
 	if (result < 0) {
-		dev_err(dev, "%s: get config number failed: %d\n", __func__, result);
+		dev_err(dev, "%s: get config number failed: %d\n",
+							__func__, result);
 		return result;
 	}
 	if (result != 1) {
-		dev_err(dev, "%s: get config number bad return length: %d\n", __func__, result);
+		dev_err(dev, "%s: get config number bad return length: %d\n",
+							__func__, result);
 		return -EIO;
 	}
 
 	/* get the interface number */
-	result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-				  USB_REQ_GET_INTERFACE, 
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+				  USB_REQ_GET_INTERFACE,
 				  USB_DIR_IN | USB_RECIP_INTERFACE,
 				  0, 0, &data, 1, 3000);
 	if (result < 0) {
-		dev_err(dev, "%s: get interface number failed: %d\n", __func__, result);
+		dev_err(dev, "%s: get interface number failed: %d\n",
+							__func__, result);
 		return result;
 	}
 	if (result != 1) {
-		dev_err(dev, "%s: get interface number bad return length: %d\n", __func__, result);
+		dev_err(dev,
+			"%s: get interface number bad return length: %d\n",
+							__func__, result);
 		return -EIO;
 	}
 
 	return generic_startup(serial);
 }
- 
-static int treo_attach (struct usb_serial *serial)
+
+static int treo_attach(struct usb_serial *serial)
 {
 	struct usb_serial_port *swap_port;
 
 	/* Only do this endpoint hack for the Handspring devices with
 	 * interrupt in endpoints, which for now are the Treo devices. */
-	if (!((le16_to_cpu(serial->dev->descriptor.idVendor) == HANDSPRING_VENDOR_ID) ||
-	      (le16_to_cpu(serial->dev->descriptor.idVendor) == KYOCERA_VENDOR_ID)) ||
-	    (serial->num_interrupt_in == 0))
+	if (!((le16_to_cpu(serial->dev->descriptor.idVendor)
+						== HANDSPRING_VENDOR_ID) ||
+		(le16_to_cpu(serial->dev->descriptor.idVendor)
+						== KYOCERA_VENDOR_ID)) ||
+		(serial->num_interrupt_in == 0))
 		goto generic_startup;
 
 	dbg("%s", __func__);
 
 	/*
-	* It appears that Treos and Kyoceras want to use the 
-	* 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, 
-	* so let's swap the 1st and 2nd bulk in and interrupt endpoints.  
-	* Note that swapping the bulk out endpoints would break lots of 
+	* It appears that Treos and Kyoceras want to use the
+	* 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
+	* so let's swap the 1st and 2nd bulk in and interrupt endpoints.
+	* Note that swapping the bulk out endpoints would break lots of
 	* apps that want to communicate on the second port.
 	*/
 #define COPY_PORT(dest, src)						\
-	dest->read_urb = src->read_urb;					\
-	dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;	\
-	dest->bulk_in_buffer = src->bulk_in_buffer;			\
-	dest->interrupt_in_urb = src->interrupt_in_urb;			\
-	dest->interrupt_in_endpointAddress = src->interrupt_in_endpointAddress;	\
-	dest->interrupt_in_buffer = src->interrupt_in_buffer;
+	do { \
+		dest->read_urb = src->read_urb;				\
+		dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
+		dest->bulk_in_buffer = src->bulk_in_buffer;		\
+		dest->interrupt_in_urb = src->interrupt_in_urb;		\
+		dest->interrupt_in_endpointAddress = \
+					src->interrupt_in_endpointAddress;\
+		dest->interrupt_in_buffer = src->interrupt_in_buffer;	\
+	} while (0);
 
 	swap_port = kmalloc(sizeof(*swap_port), GFP_KERNEL);
 	if (!swap_port)
@@ -866,28 +901,30 @@ generic_startup:
 	return generic_startup(serial);
 }
 
-static int clie_5_attach (struct usb_serial *serial)
+static int clie_5_attach(struct usb_serial *serial)
 {
 	dbg("%s", __func__);
 
-	/* TH55 registers 2 ports. 
-	   Communication in from the UX50/TH55 uses bulk_in_endpointAddress from port 0 
-	   Communication out to the UX50/TH55 uses bulk_out_endpointAddress from port 1 
-	   
+	/* TH55 registers 2 ports.
+	   Communication in from the UX50/TH55 uses bulk_in_endpointAddress
+	   from port 0. Communication out to the UX50/TH55 uses
+	   bulk_out_endpointAddress from port 1
+
 	   Lets do a quick and dirty mapping
 	 */
-	
+
 	/* some sanity check */
 	if (serial->num_ports < 2)
 		return -1;
-		
+
 	/* port 0 now uses the modified endpoint Address */
-	serial->port[0]->bulk_out_endpointAddress = serial->port[1]->bulk_out_endpointAddress;
+	serial->port[0]->bulk_out_endpointAddress =
+				serial->port[1]->bulk_out_endpointAddress;
 
 	return generic_startup(serial);
 }
 
-static void visor_shutdown (struct usb_serial *serial)
+static void visor_shutdown(struct usb_serial *serial)
 {
 	struct visor_private *priv;
 	int i;
@@ -903,30 +940,35 @@ static void visor_shutdown (struct usb_serial *serial)
 	}
 }
 
-static int __init visor_init (void)
+static int __init visor_init(void)
 {
 	int i, retval;
 	/* Only if parameters were passed to us */
-	if ((vendor>0) && (product>0)) {
-		struct usb_device_id usb_dev_temp[]=
-			{{USB_DEVICE(vendor, product),
-			.driver_info = (kernel_ulong_t)&palm_os_4_probe }};
+	if (vendor > 0 && product > 0) {
+		struct usb_device_id usb_dev_temp[] = {
+			{
+				USB_DEVICE(vendor, product),
+				.driver_info =
+					(kernel_ulong_t) &palm_os_4_probe
+			}
+		};
 
 		/* Find the last entry in id_table */
-		for (i=0; ; i++) {
-			if (id_table[i].idVendor==0) {
+		for (i = 0;; i++) {
+			if (id_table[i].idVendor == 0) {
 				id_table[i] = usb_dev_temp[0];
 				break;
 			}
 		}
 		/* Find the last entry in id_table_combined */
-		for (i=0; ; i++) {
-			if (id_table_combined[i].idVendor==0) {
+		for (i = 0;; i++) {
+			if (id_table_combined[i].idVendor == 0) {
 				id_table_combined[i] = usb_dev_temp[0];
 				break;
 			}
 		}
-		info("Untested USB device specified at time of module insertion");
+		info(
+		  "Untested USB device specified at time of module insertion");
 		info("Warning: This is not guaranteed to work");
 		info("Using a newer kernel is preferred to this method");
 		info("Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x",
@@ -942,7 +984,7 @@ static int __init visor_init (void)
 	if (retval)
 		goto failed_clie_5_register;
 	retval = usb_register(&visor_driver);
-	if (retval) 
+	if (retval)
 		goto failed_usb_register;
 	info(DRIVER_DESC);
 
@@ -960,18 +1002,18 @@ failed_handspring_register:
 
 static void __exit visor_exit (void)
 {
-	usb_deregister (&visor_driver);
-	usb_serial_deregister (&handspring_device);
-	usb_serial_deregister (&clie_3_5_device);
-	usb_serial_deregister (&clie_5_device);
+	usb_deregister(&visor_driver);
+	usb_serial_deregister(&handspring_device);
+	usb_serial_deregister(&clie_3_5_device);
+	usb_serial_deregister(&clie_5_device);
 }
 
 
 module_init(visor_init);
 module_exit(visor_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From a8d6f0a9c4c9af0e478383d870e828693e983dfb Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:12:24 +0100
Subject: usb-serial: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/usb-serial.c | 304 ++++++++++++++++++++++------------------
 1 file changed, 164 insertions(+), 140 deletions(-)

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index ffaed8ace06..51917b0f079 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -12,7 +12,8 @@
  * This driver was originally based on the ACM driver by Armin Fuerst (which was
  * based on a driver by Brad Keryan)
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  */
 
@@ -28,7 +29,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 #include <linux/list.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "pl2303.h"
@@ -59,7 +60,8 @@ static struct usb_driver usb_serial_driver = {
 */
 
 static int debug;
-static struct usb_serial *serial_table[SERIAL_TTY_MINORS];	/* initially all NULL */
+/* initially all NULL */
+static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
 static DEFINE_MUTEX(table_lock);
 static LIST_HEAD(usb_serial_driver_list);
 
@@ -76,7 +78,8 @@ struct usb_serial *usb_serial_get_by_index(unsigned index)
 	return serial;
 }
 
-static struct usb_serial *get_free_serial (struct usb_serial *serial, int num_ports, unsigned int *minor)
+static struct usb_serial *get_free_serial(struct usb_serial *serial,
+					int num_ports, unsigned int *minor)
 {
 	unsigned int i, j;
 	int good_spot;
@@ -122,9 +125,8 @@ static void return_serial(struct usb_serial *serial)
 	if (serial == NULL)
 		return;
 
-	for (i = 0; i < serial->num_ports; ++i) {
+	for (i = 0; i < serial->num_ports; ++i)
 		serial_table[serial->minor + i] = NULL;
-	}
 }
 
 static void destroy_serial(struct kref *kref)
@@ -156,7 +158,8 @@ static void destroy_serial(struct kref *kref)
 	 * not get cleaned up in port_release() as it was never registered with
 	 * the driver core */
 	if (serial->num_ports < serial->num_port_pointers) {
-		for (i = serial->num_ports; i < serial->num_port_pointers; ++i) {
+		for (i = serial->num_ports;
+					i < serial->num_port_pointers; ++i) {
 			port = serial->port[i];
 			if (!port)
 				continue;
@@ -167,7 +170,7 @@ static void destroy_serial(struct kref *kref)
 	usb_put_dev(serial->dev);
 
 	/* free up any memory that we allocated */
-	kfree (serial);
+	kfree(serial);
 }
 
 void usb_serial_put(struct usb_serial *serial)
@@ -180,13 +183,13 @@ void usb_serial_put(struct usb_serial *serial)
 /*****************************************************************************
  * Driver tty interface functions
  *****************************************************************************/
-static int serial_open (struct tty_struct *tty, struct file * filp)
+static int serial_open (struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial *serial;
 	struct usb_serial_port *port;
 	unsigned int portNumber;
 	int retval;
-	
+
 	dbg("%s", __func__);
 
 	/* get the serial object associated with this tty pointer */
@@ -207,7 +210,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 		retval = -ERESTARTSYS;
 		goto bailout_kref_put;
 	}
-	 
+
 	++port->port.count;
 
 	/* set up our port structure making the tty driver
@@ -228,7 +231,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 		retval = usb_autopm_get_interface(serial->interface);
 		if (retval)
 			goto bailout_module_put;
-		/* only call the device specific open if this 
+		/* only call the device specific open if this
 		 * is the first time the port is opened */
 		retval = serial->type->open(tty, port, filp);
 		if (retval)
@@ -252,7 +255,7 @@ bailout_kref_put:
 	return retval;
 }
 
-static void serial_close(struct tty_struct *tty, struct file * filp)
+static void serial_close(struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
@@ -270,7 +273,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 
 	--port->port.count;
 	if (port->port.count == 0)
-		/* only call the device specific close if this 
+		/* only call the device specific close if this
 		 * port is being closed by the last owner */
 		port->serial->type->close(tty, port, filp);
 
@@ -294,7 +297,8 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 	usb_serial_put(port->serial);
 }
 
-static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count)
+static int serial_write(struct tty_struct *tty, const unsigned char *buf,
+								int count)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	int retval = -ENODEV;
@@ -305,7 +309,7 @@ static int serial_write (struct tty_struct * tty, const unsigned char *buf, int
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
 	/* count is managed under the mutex lock for the tty so cannot
-           drop to zero until after the last close completes */
+	   drop to zero until after the last close completes */
 	WARN_ON(!port->port.count);
 
 	/* pass on to the driver specific version of this function */
@@ -315,7 +319,7 @@ exit:
 	return retval;
 }
 
-static int serial_write_room (struct tty_struct *tty) 
+static int serial_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
@@ -324,7 +328,7 @@ static int serial_write_room (struct tty_struct *tty)
 	return port->serial->type->write_room(tty);
 }
 
-static int serial_chars_in_buffer (struct tty_struct *tty) 
+static int serial_chars_in_buffer(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s = port %d", __func__, port->number);
@@ -334,7 +338,7 @@ static int serial_chars_in_buffer (struct tty_struct *tty)
 	return port->serial->type->chars_in_buffer(tty);
 }
 
-static void serial_throttle (struct tty_struct * tty)
+static void serial_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
@@ -345,7 +349,7 @@ static void serial_throttle (struct tty_struct * tty)
 		port->serial->type->throttle(tty);
 }
 
-static void serial_unthrottle (struct tty_struct * tty)
+static void serial_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
@@ -356,7 +360,8 @@ static void serial_unthrottle (struct tty_struct * tty)
 		port->serial->type->unthrottle(tty);
 }
 
-static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int serial_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	int retval = -ENODEV;
@@ -365,38 +370,40 @@ static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned in
 
 	WARN_ON(!port->port.count);
 
-	/* pass on to the driver specific version of this function if it is available */
+	/* pass on to the driver specific version of this function
+	   if it is available */
 	if (port->serial->type->ioctl) {
 		lock_kernel();
 		retval = port->serial->type->ioctl(tty, file, cmd, arg);
 		unlock_kernel();
-	}
-	else
+	} else
 		retval = -ENOIOCTLCMD;
 	return retval;
 }
 
-static void serial_set_termios (struct tty_struct *tty, struct ktermios * old)
+static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
 	WARN_ON(!port->port.count);
-	/* pass on to the driver specific version of this function if it is available */
+	/* pass on to the driver specific version of this function
+	   if it is available */
 	if (port->serial->type->set_termios)
 		port->serial->type->set_termios(tty, port, old);
 	else
 		tty_termios_copy_hw(tty->termios, old);
 }
 
-static void serial_break (struct tty_struct *tty, int break_state)
+static void serial_break(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	WARN_ON(!port->port.count);
-	/* pass on to the driver specific version of this function if it is available */
+	/* pass on to the driver specific version of this function
+	   if it is available */
 	if (port->serial->type->break_ctl) {
 		lock_kernel();
 		port->serial->type->break_ctl(tty, break_state);
@@ -404,7 +411,8 @@ static void serial_break (struct tty_struct *tty, int break_state)
 	}
 }
 
-static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data)
+static int serial_read_proc(char *page, char **start, off_t off, int count,
+							int *eof, void *data)
 {
 	struct usb_serial *serial;
 	int length = 0;
@@ -413,26 +421,29 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int
 	char tmp[40];
 
 	dbg("%s", __func__);
-	length += sprintf (page, "usbserinfo:1.0 driver:2.0\n");
+	length += sprintf(page, "usbserinfo:1.0 driver:2.0\n");
 	for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
 		serial = usb_serial_get_by_index(i);
 		if (serial == NULL)
 			continue;
 
-		length += sprintf (page+length, "%d:", i);
+		length += sprintf(page+length, "%d:", i);
 		if (serial->type->driver.owner)
-			length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner));
-		length += sprintf (page+length, " name:\"%s\"", serial->type->description);
-		length += sprintf (page+length, " vendor:%04x product:%04x", 
-				   le16_to_cpu(serial->dev->descriptor.idVendor), 
-				   le16_to_cpu(serial->dev->descriptor.idProduct));
-		length += sprintf (page+length, " num_ports:%d", serial->num_ports);
-		length += sprintf (page+length, " port:%d", i - serial->minor + 1);
-
+			length += sprintf(page+length, " module:%s",
+				module_name(serial->type->driver.owner));
+		length += sprintf(page+length, " name:\"%s\"",
+				serial->type->description);
+		length += sprintf(page+length, " vendor:%04x product:%04x",
+			le16_to_cpu(serial->dev->descriptor.idVendor),
+			le16_to_cpu(serial->dev->descriptor.idProduct));
+		length += sprintf(page+length, " num_ports:%d",
+							serial->num_ports);
+		length += sprintf(page+length, " port:%d",
+							i - serial->minor + 1);
 		usb_make_path(serial->dev, tmp, sizeof(tmp));
-		length += sprintf (page+length, " path:%s", tmp);
-			
-		length += sprintf (page+length, "\n");
+		length += sprintf(page+length, " path:%s", tmp);
+
+		length += sprintf(page+length, "\n");
 		if ((length + begin) > (off + count)) {
 			usb_serial_put(serial);
 			goto done;
@@ -448,10 +459,10 @@ done:
 	if (off >= (length + begin))
 		return 0;
 	*start = page + (off-begin);
-	return ((count < begin+length-off) ? count : begin+length-off);
+	return (count < begin+length-off) ? count : begin+length-off;
 }
 
-static int serial_tiocmget (struct tty_struct *tty, struct file *file)
+static int serial_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
@@ -463,7 +474,7 @@ static int serial_tiocmget (struct tty_struct *tty, struct file *file)
 	return -EINVAL;
 }
 
-static int serial_tiocmset (struct tty_struct *tty, struct file *file,
+static int serial_tiocmset(struct tty_struct *tty, struct file *file,
 			    unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -485,6 +496,7 @@ void usb_serial_port_softint(struct usb_serial_port *port)
 {
 	schedule_work(&port->work);
 }
+EXPORT_SYMBOL_GPL(usb_serial_port_softint);
 
 static void usb_serial_port_work(struct work_struct *work)
 {
@@ -493,7 +505,7 @@ static void usb_serial_port_work(struct work_struct *work)
 	struct tty_struct *tty;
 
 	dbg("%s - port %d", __func__, port->number);
-	
+
 	if (!port)
 		return;
 
@@ -546,9 +558,9 @@ static void port_free(struct usb_serial_port *port)
 	kfree(port);
 }
 
-static struct usb_serial * create_serial (struct usb_device *dev, 
-					  struct usb_interface *interface,
-					  struct usb_serial_driver *driver)
+static struct usb_serial *create_serial(struct usb_device *dev,
+					struct usb_interface *interface,
+					struct usb_serial_driver *driver)
 {
 	struct usb_serial *serial;
 
@@ -567,7 +579,7 @@ static struct usb_serial * create_serial (struct usb_device *dev,
 }
 
 static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
-						    struct usb_serial_driver *drv)
+					    struct usb_serial_driver *drv)
 {
 	struct usb_dynid *dynid;
 
@@ -599,7 +611,8 @@ exit:
 	return id;
 }
 
-static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
+static struct usb_serial_driver *search_serial_device(
+					struct usb_interface *iface)
 {
 	const struct usb_device_id *id;
 	struct usb_serial_driver *drv;
@@ -617,7 +630,7 @@ static struct usb_serial_driver *search_serial_device(struct usb_interface *ifac
 int usb_serial_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
-	struct usb_device *dev = interface_to_usbdev (interface);
+	struct usb_device *dev = interface_to_usbdev(interface);
 	struct usb_serial *serial = NULL;
 	struct usb_serial_port *port;
 	struct usb_host_interface *iface_desc;
@@ -646,7 +659,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		return -ENODEV;
 	}
 
-	serial = create_serial (dev, interface, type);
+	serial = create_serial(dev, interface, type);
 	if (!serial) {
 		unlock_kernel();
 		dev_err(&interface->dev, "%s - out of memory\n", __func__);
@@ -659,8 +672,9 @@ int usb_serial_probe(struct usb_interface *interface,
 
 		if (!try_module_get(type->driver.owner)) {
 			unlock_kernel();
-			dev_err(&interface->dev, "module get failed, exiting\n");
-			kfree (serial);
+			dev_err(&interface->dev,
+				"module get failed, exiting\n");
+			kfree(serial);
 			return -EIO;
 		}
 
@@ -670,8 +684,8 @@ int usb_serial_probe(struct usb_interface *interface,
 
 		if (retval) {
 			unlock_kernel();
-			dbg ("sub driver rejected device");
-			kfree (serial);
+			dbg("sub driver rejected device");
+			kfree(serial);
 			return retval;
 		}
 	}
@@ -712,7 +726,7 @@ int usb_serial_probe(struct usb_interface *interface,
 	}
 
 #if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
-	/* BEGIN HORRIBLE HACK FOR PL2303 */ 
+	/* BEGIN HORRIBLE HACK FOR PL2303 */
 	/* this is needed due to the looney way its endpoints are set up */
 	if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&
 	     (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||
@@ -741,7 +755,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		if (num_bulk_in == 0 || num_bulk_out == 0) {
 			unlock_kernel();
 			dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
-			kfree (serial);
+			kfree(serial);
 			return -ENODEV;
 		}
 	}
@@ -753,8 +767,9 @@ int usb_serial_probe(struct usb_interface *interface,
 		num_ports = num_bulk_out;
 		if (num_ports == 0) {
 			unlock_kernel();
-			dev_err(&interface->dev, "Generic device with no bulk out, not allowed.\n");
-			kfree (serial);
+			dev_err(&interface->dev,
+			    "Generic device with no bulk out, not allowed.\n");
+			kfree(serial);
 			return -EIO;
 		}
 	}
@@ -764,11 +779,12 @@ int usb_serial_probe(struct usb_interface *interface,
 		if (type->calc_num_ports) {
 			if (!try_module_get(type->driver.owner)) {
 				unlock_kernel();
-				dev_err(&interface->dev, "module get failed, exiting\n");
-				kfree (serial);
+				dev_err(&interface->dev,
+					"module get failed, exiting\n");
+				kfree(serial);
 				return -EIO;
 			}
-			num_ports = type->calc_num_ports (serial);
+			num_ports = type->calc_num_ports(serial);
 			module_put(type->driver.owner);
 		}
 		if (!num_ports)
@@ -786,7 +802,8 @@ int usb_serial_probe(struct usb_interface *interface,
 			type->description);
 
 	/* create our ports, we need as many as the max endpoints */
-	/* we don't use num_ports here cauz some devices have more endpoint pairs than ports */
+	/* we don't use num_ports here because some devices have more
+	   endpoint pairs than ports */
 	max_endpoints = max(num_bulk_in, num_bulk_out);
 	max_endpoints = max(max_endpoints, num_interrupt_in);
 	max_endpoints = max(max_endpoints, num_interrupt_out);
@@ -794,7 +811,8 @@ int usb_serial_probe(struct usb_interface *interface,
 	serial->num_port_pointers = max_endpoints;
 	unlock_kernel();
 
-	dbg("%s - setting up %d port structures for this device", __func__, max_endpoints);
+	dbg("%s - setting up %d port structures for this device",
+						__func__, max_endpoints);
 	for (i = 0; i < max_endpoints; ++i) {
 		port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
 		if (!port)
@@ -810,7 +828,7 @@ int usb_serial_probe(struct usb_interface *interface,
 	for (i = 0; i < num_bulk_in; ++i) {
 		endpoint = bulk_in_endpoint[i];
 		port = serial->port[i];
-		port->read_urb = usb_alloc_urb (0, GFP_KERNEL);
+		port->read_urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!port->read_urb) {
 			dev_err(&interface->dev, "No free urbs available\n");
 			goto probe_error;
@@ -818,17 +836,17 @@ int usb_serial_probe(struct usb_interface *interface,
 		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 		port->bulk_in_size = buffer_size;
 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
-		port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
+		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
 		if (!port->bulk_in_buffer) {
-			dev_err(&interface->dev, "Couldn't allocate bulk_in_buffer\n");
+			dev_err(&interface->dev,
+					"Couldn't allocate bulk_in_buffer\n");
 			goto probe_error;
 		}
-		usb_fill_bulk_urb (port->read_urb, dev,
-				   usb_rcvbulkpipe (dev,
-					   	    endpoint->bEndpointAddress),
-				   port->bulk_in_buffer, buffer_size,
-				   serial->type->read_bulk_callback,
-				   port);
+		usb_fill_bulk_urb(port->read_urb, dev,
+				usb_rcvbulkpipe(dev,
+						endpoint->bEndpointAddress),
+				port->bulk_in_buffer, buffer_size,
+				serial->type->read_bulk_callback, port);
 	}
 
 	for (i = 0; i < num_bulk_out; ++i) {
@@ -842,17 +860,17 @@ int usb_serial_probe(struct usb_interface *interface,
 		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 		port->bulk_out_size = buffer_size;
 		port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
-		port->bulk_out_buffer = kmalloc (buffer_size, GFP_KERNEL);
+		port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
 		if (!port->bulk_out_buffer) {
-			dev_err(&interface->dev, "Couldn't allocate bulk_out_buffer\n");
+			dev_err(&interface->dev,
+					"Couldn't allocate bulk_out_buffer\n");
 			goto probe_error;
 		}
-		usb_fill_bulk_urb (port->write_urb, dev,
-				   usb_sndbulkpipe (dev,
-						    endpoint->bEndpointAddress),
-				   port->bulk_out_buffer, buffer_size, 
-				   serial->type->write_bulk_callback,
-				   port);
+		usb_fill_bulk_urb(port->write_urb, dev,
+				usb_sndbulkpipe(dev,
+					endpoint->bEndpointAddress),
+				port->bulk_out_buffer, buffer_size,
+				serial->type->write_bulk_callback, port);
 	}
 
 	if (serial->type->read_int_callback) {
@@ -861,73 +879,82 @@ int usb_serial_probe(struct usb_interface *interface,
 			port = serial->port[i];
 			port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
 			if (!port->interrupt_in_urb) {
-				dev_err(&interface->dev, "No free urbs available\n");
+				dev_err(&interface->dev,
+						"No free urbs available\n");
 				goto probe_error;
 			}
 			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
-			port->interrupt_in_endpointAddress = endpoint->bEndpointAddress;
-			port->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
+			port->interrupt_in_endpointAddress =
+						endpoint->bEndpointAddress;
+			port->interrupt_in_buffer = kmalloc(buffer_size,
+								GFP_KERNEL);
 			if (!port->interrupt_in_buffer) {
-				dev_err(&interface->dev, "Couldn't allocate interrupt_in_buffer\n");
+				dev_err(&interface->dev,
+				    "Couldn't allocate interrupt_in_buffer\n");
 				goto probe_error;
 			}
-			usb_fill_int_urb (port->interrupt_in_urb, dev, 
-					  usb_rcvintpipe (dev,
-							  endpoint->bEndpointAddress),
-					  port->interrupt_in_buffer, buffer_size, 
-					  serial->type->read_int_callback, port, 
-					  endpoint->bInterval);
+			usb_fill_int_urb(port->interrupt_in_urb, dev,
+				usb_rcvintpipe(dev,
+						endpoint->bEndpointAddress),
+				port->interrupt_in_buffer, buffer_size,
+				serial->type->read_int_callback, port,
+				endpoint->bInterval);
 		}
 	} else if (num_interrupt_in) {
 		dbg("the device claims to support interrupt in transfers, but read_int_callback is not defined");
 	}
-	
+
 	if (serial->type->write_int_callback) {
 		for (i = 0; i < num_interrupt_out; ++i) {
 			endpoint = interrupt_out_endpoint[i];
 			port = serial->port[i];
 			port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
 			if (!port->interrupt_out_urb) {
-				dev_err(&interface->dev, "No free urbs available\n");
+				dev_err(&interface->dev,
+						"No free urbs available\n");
 				goto probe_error;
 			}
 			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 			port->interrupt_out_size = buffer_size;
-			port->interrupt_out_endpointAddress = endpoint->bEndpointAddress;
-			port->interrupt_out_buffer = kmalloc (buffer_size, GFP_KERNEL);
+			port->interrupt_out_endpointAddress =
+						endpoint->bEndpointAddress;
+			port->interrupt_out_buffer = kmalloc(buffer_size,
+								GFP_KERNEL);
 			if (!port->interrupt_out_buffer) {
-				dev_err(&interface->dev, "Couldn't allocate interrupt_out_buffer\n");
+				dev_err(&interface->dev,
+				  "Couldn't allocate interrupt_out_buffer\n");
 				goto probe_error;
 			}
-			usb_fill_int_urb (port->interrupt_out_urb, dev,
-					  usb_sndintpipe (dev,
-							  endpoint->bEndpointAddress),
-					  port->interrupt_out_buffer, buffer_size,
-					  serial->type->write_int_callback, port,
-					  endpoint->bInterval);
+			usb_fill_int_urb(port->interrupt_out_urb, dev,
+				usb_sndintpipe(dev,
+						  endpoint->bEndpointAddress),
+				port->interrupt_out_buffer, buffer_size,
+				serial->type->write_int_callback, port,
+				endpoint->bInterval);
 		}
 	} else if (num_interrupt_out) {
 		dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined");
 	}
-	
+
 	/* if this device type has an attach function, call it */
 	if (type->attach) {
 		if (!try_module_get(type->driver.owner)) {
-			dev_err(&interface->dev, "module get failed, exiting\n");
+			dev_err(&interface->dev,
+					"module get failed, exiting\n");
 			goto probe_error;
 		}
-		retval = type->attach (serial);
+		retval = type->attach(serial);
 		module_put(type->driver.owner);
 		if (retval < 0)
 			goto probe_error;
 		if (retval > 0) {
-			/* quietly accept this device, but don't bind to a serial port
-			 * as it's about to disappear */
+			/* quietly accept this device, but don't bind to a
+			   serial port as it's about to disappear */
 			goto exit;
 		}
 	}
 
-	if (get_free_serial (serial, num_ports, &minor) == NULL) {
+	if (get_free_serial(serial, num_ports, &minor) == NULL) {
 		dev_err(&interface->dev, "No more free serial devices\n");
 		goto probe_error;
 	}
@@ -949,11 +976,11 @@ int usb_serial_probe(struct usb_interface *interface,
 				"continuing\n");
 	}
 
-	usb_serial_console_init (debug, minor);
+	usb_serial_console_init(debug, minor);
 
 exit:
 	/* success */
-	usb_set_intfdata (interface, serial);
+	usb_set_intfdata(interface, serial);
 	return 0;
 
 probe_error:
@@ -989,22 +1016,23 @@ probe_error:
 	/* free up any memory that we allocated */
 	for (i = 0; i < serial->num_port_pointers; ++i)
 		kfree(serial->port[i]);
-	kfree (serial);
+	kfree(serial);
 	return -EIO;
 }
+EXPORT_SYMBOL_GPL(usb_serial_probe);
 
 void usb_serial_disconnect(struct usb_interface *interface)
 {
 	int i;
-	struct usb_serial *serial = usb_get_intfdata (interface);
+	struct usb_serial *serial = usb_get_intfdata(interface);
 	struct device *dev = &interface->dev;
 	struct usb_serial_port *port;
 
 	usb_serial_console_disconnect(serial);
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	mutex_lock(&serial->disc_mutex);
-	usb_set_intfdata (interface, NULL);
+	usb_set_intfdata(interface, NULL);
 	/* must set a flag, to signal subdrivers */
 	serial->disconnected = 1;
 	for (i = 0; i < serial->num_ports; ++i) {
@@ -1021,6 +1049,7 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	usb_serial_put(serial);
 	dev_info(dev, "device disconnected\n");
 }
+EXPORT_SYMBOL_GPL(usb_serial_disconnect);
 
 int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
 {
@@ -1079,9 +1108,8 @@ static int __init usb_serial_init(void)
 		return -ENOMEM;
 
 	/* Initialize our global data */
-	for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
+	for (i = 0; i < SERIAL_TTY_MINORS; ++i)
 		serial_table[i] = NULL;
-	}
 
 	result = bus_register(&usb_serial_bus_type);
 	if (result) {
@@ -1096,9 +1124,11 @@ static int __init usb_serial_init(void)
 	usb_serial_tty_driver->minor_start = 0;
 	usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
 	usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
-	usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW |
+						TTY_DRIVER_DYNAMIC_DEV;
 	usb_serial_tty_driver->init_termios = tty_std_termios;
-	usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
+							| HUPCL | CLOCAL;
 	usb_serial_tty_driver->init_termios.c_ispeed = 9600;
 	usb_serial_tty_driver->init_termios.c_ospeed = 9600;
 	tty_set_operations(usb_serial_tty_driver, &serial_ops);
@@ -1136,7 +1166,7 @@ exit_reg_driver:
 	bus_unregister(&usb_serial_bus_type);
 
 exit_bus:
-	err ("%s - returning with error %d", __func__, result);
+	err("%s - returning with error %d", __func__, result);
 	put_tty_driver(usb_serial_tty_driver);
 	return result;
 }
@@ -1163,7 +1193,7 @@ module_exit(usb_serial_exit);
 		if (!type->function) {					\
 			type->function = usb_serial_generic_##function;	\
 			dbg("Had to override the " #function		\
-				 " usb serial operation with the generic one.");\
+				" usb serial operation with the generic one.");\
 			}						\
 	} while (0)
 
@@ -1180,8 +1210,9 @@ static void fixup_generic(struct usb_serial_driver *device)
 	set_to_generic_if_null(device, resume);
 }
 
-int usb_serial_register(struct usb_serial_driver *driver) /* must be called with BKL held */
+int usb_serial_register(struct usb_serial_driver *driver)
 {
+	/* must be called with BKL held */
 	int retval;
 
 	fixup_generic(driver);
@@ -1194,37 +1225,30 @@ int usb_serial_register(struct usb_serial_driver *driver) /* must be called with
 
 	retval = usb_serial_bus_register(driver);
 	if (retval) {
-		err("problem %d when registering driver %s", retval, driver->description);
+		err("problem %d when registering driver %s",
+						retval, driver->description);
 		list_del(&driver->driver_list);
-	}
-	else
-		info("USB Serial support registered for %s", driver->description);
+	} else
+		info("USB Serial support registered for %s",
+						driver->description);
 
 	return retval;
 }
+EXPORT_SYMBOL_GPL(usb_serial_register);
 
 
-void usb_serial_deregister(struct usb_serial_driver *device) /* must be called with BKL held */
+void usb_serial_deregister(struct usb_serial_driver *device)
 {
+	/* must be called with BKL held */
 	info("USB Serial deregistering driver %s", device->description);
 	list_del(&device->driver_list);
 	usb_serial_bus_deregister(device);
 }
-
-
-
-/* If the usb-serial core is built into the core, the usb-serial drivers
-   need these symbols to load properly as modules. */
-EXPORT_SYMBOL_GPL(usb_serial_register);
 EXPORT_SYMBOL_GPL(usb_serial_deregister);
-EXPORT_SYMBOL_GPL(usb_serial_probe);
-EXPORT_SYMBOL_GPL(usb_serial_disconnect);
-EXPORT_SYMBOL_GPL(usb_serial_port_softint);
-
 
 /* Module information */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From 2e0ddd626d14f3b69d6c1bdd526721a65d52f93b Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:12:33 +0100
Subject: io_ti: Minor coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/io_ti.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 7cf383a2a55..cb4c54316cf 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2419,7 +2419,7 @@ static void change_port_settings(struct tty_struct *tty,
 	return;
 }
 
-static void edge_set_termios(struct tty_struct *tty, 
+static void edge_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-- 
cgit v1.2.3


From eb6215ccd403153c6376f7eaa7b31eef19e488f5 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:12:41 +0100
Subject: ipaq: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ipaq.c | 97 +++++++++++++++++++++++++----------------------
 1 file changed, 52 insertions(+), 45 deletions(-)

diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index a7784642d6a..832a5a4f3cb 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -53,7 +53,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "ipaq.h"
@@ -82,10 +82,10 @@ static int  ipaq_startup(struct usb_serial *serial);
 static void ipaq_shutdown(struct usb_serial *serial);
 static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
-static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *buf,
-			int count);
+static int ipaq_write_bulk(struct usb_serial_port *port,
+				const unsigned char *buf, int count);
 static void ipaq_write_gather(struct usb_serial_port *port);
-static void ipaq_read_bulk_callback (struct urb *urb);
+static void ipaq_read_bulk_callback(struct urb *urb);
 static void ipaq_write_bulk_callback(struct urb *urb);
 static int ipaq_write_room(struct tty_struct *tty);
 static int ipaq_chars_in_buffer(struct tty_struct *tty);
@@ -552,7 +552,7 @@ static struct usb_device_id ipaq_id_table [] = {
 	{ }                             /* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, ipaq_id_table);
+MODULE_DEVICE_TABLE(usb, ipaq_id_table);
 
 static struct usb_driver ipaq_driver = {
 	.name =		"ipaq",
@@ -620,9 +620,9 @@ static int ipaq_open(struct tty_struct *tty,
 
 	for (i = 0; i < URBDATA_QUEUE_MAX / PACKET_SIZE; i++) {
 		pkt = kmalloc(sizeof(struct ipaq_packet), GFP_KERNEL);
-		if (pkt == NULL) {
+		if (pkt == NULL)
 			goto enomem;
-		}
+
 		pkt->data = kmalloc(PACKET_SIZE, GFP_KERNEL);
 		if (pkt->data == NULL) {
 			kfree(pkt);
@@ -667,8 +667,9 @@ static int ipaq_open(struct tty_struct *tty,
 	port->read_urb->transfer_buffer = port->bulk_in_buffer;
 	port->write_urb->transfer_buffer = port->bulk_out_buffer;
 	port->read_urb->transfer_buffer_length = URBDATA_SIZE;
-	port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE;
-	
+	port->bulk_out_size = port->write_urb->transfer_buffer_length
+							= URBDATA_SIZE;
+
 	msleep(1000*initial_wait);
 
 	/*
@@ -697,13 +698,15 @@ static int ipaq_open(struct tty_struct *tty,
 
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev,
-		      usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
-		      ipaq_read_bulk_callback, port);
+		usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
+		port->read_urb->transfer_buffer,
+		port->read_urb->transfer_buffer_length,
+		ipaq_read_bulk_callback, port);
 
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result) {
-		err("%s - failed submitting read urb, error %d", __func__, result);
+		err("%s - failed submitting read urb, error %d",
+						__func__, result);
 		goto error;
 	}
 
@@ -725,7 +728,7 @@ static void ipaq_close(struct tty_struct *tty,
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 
 	dbg("%s - port %d", __func__, port->number);
-			 
+
 	/*
 	 * shut down bulk read and write
 	 */
@@ -735,7 +738,8 @@ static void ipaq_close(struct tty_struct *tty,
 	kfree(priv);
 	usb_set_serial_port_data(port, NULL);
 
-	/* Uncomment the following line if you want to see some statistics in your syslog */
+	/* Uncomment the following line if you want to see some statistics
+	 * in your syslog */
 	/* info ("Bytes In = %d  Bytes Out = %d", bytes_in, bytes_out); */
 }
 
@@ -755,7 +759,8 @@ static void ipaq_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
 
 	tty = port->port.tty;
 	if (tty && urb->actual_length) {
@@ -766,13 +771,15 @@ static void ipaq_read_bulk_callback(struct urb *urb)
 	}
 
 	/* Continue trying to always read  */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev, 
-		      usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
-		      ipaq_read_bulk_callback, port);
+	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+	    usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
+	    port->read_urb->transfer_buffer,
+	    port->read_urb->transfer_buffer_length,
+	    ipaq_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	if (result)
-		err("%s - failed resubmitting read urb, error %d", __func__, result);
+		err("%s - failed resubmitting read urb, error %d",
+							__func__, result);
 	return;
 }
 
@@ -787,9 +794,8 @@ static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	while (count > 0) {
 		transfer_size = min(count, PACKET_SIZE);
-		if (ipaq_write_bulk(port, current_position, transfer_size)) {
+		if (ipaq_write_bulk(port, current_position, transfer_size))
 			break;
-		}
 		current_position += transfer_size;
 		bytes_sent += transfer_size;
 		count -= transfer_size;
@@ -797,10 +803,10 @@ static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	return bytes_sent;
-} 
+}
 
-static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *buf,
-			   int count)
+static int ipaq_write_bulk(struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 	struct ipaq_packet	*pkt = NULL;
@@ -837,9 +843,9 @@ static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *bu
 		ipaq_write_gather(port);
 		spin_unlock_irqrestore(&write_list_lock, flags);
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result) {
-			err("%s - failed submitting write urb, error %d", __func__, result);
-		}
+		if (result)
+			err("%s - failed submitting write urb, error %d",
+				__func__, result);
 	} else {
 		spin_unlock_irqrestore(&write_list_lock, flags);
 	}
@@ -866,16 +872,15 @@ static void ipaq_write_gather(struct usb_serial_port *port)
 			list_move(&pkt->list, &priv->freelist);
 			priv->free_len += PACKET_SIZE;
 		}
-		if (room == 0) {
+		if (room == 0)
 			break;
-		}
 	}
 
 	count = URBDATA_SIZE - room;
-	usb_fill_bulk_urb(port->write_urb, serial->dev, 
-		      usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
-		      port->write_urb->transfer_buffer, count, ipaq_write_bulk_callback,
-		      port);
+	usb_fill_bulk_urb(port->write_urb, serial->dev,
+		usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
+		port->write_urb->transfer_buffer, count,
+		ipaq_write_bulk_callback, port);
 	return;
 }
 
@@ -900,9 +905,9 @@ static void ipaq_write_bulk_callback(struct urb *urb)
 		ipaq_write_gather(port);
 		spin_unlock_irqrestore(&write_list_lock, flags);
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result) {
-			err("%s - failed submitting write urb, error %d", __func__, result);
-		}
+		if (result)
+			err("%s - failed submitting write urb, error %d",
+					__func__, result);
 	} else {
 		priv->active = 0;
 		spin_unlock_irqrestore(&write_list_lock, flags);
@@ -953,7 +958,7 @@ static int ipaq_startup(struct usb_serial *serial)
 			serial->dev->actconfig->desc.bConfigurationValue);
 		return -ENODEV;
 	}
-	return usb_reset_configuration (serial->dev);
+	return usb_reset_configuration(serial->dev);
 }
 
 static void ipaq_shutdown(struct usb_serial *serial)
@@ -966,7 +971,7 @@ static int __init ipaq_init(void)
 	int retval;
 	spin_lock_init(&write_list_lock);
 	retval = usb_serial_register(&ipaq_device);
-	if (retval) 
+	if (retval)
 		goto failed_usb_serial_register;
 	info(DRIVER_DESC " " DRIVER_VERSION);
 	if (vendor) {
@@ -976,7 +981,7 @@ static int __init ipaq_init(void)
 	retval = usb_register(&ipaq_driver);
 	if (retval)
 		goto failed_usb_register;
-		  
+
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&ipaq_device);
@@ -995,8 +1000,8 @@ static void __exit ipaq_exit(void)
 module_init(ipaq_init);
 module_exit(ipaq_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
@@ -1009,7 +1014,9 @@ module_param(product, ushort, 0);
 MODULE_PARM_DESC(product, "User specified USB idProduct");
 
 module_param(connect_retries, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)");
+MODULE_PARM_DESC(connect_retries,
+		"Maximum number of connect retries (one second each)");
 
 module_param(initial_wait, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)");
+MODULE_PARM_DESC(initial_wait,
+		"Time to wait before attempting a connection (in seconds)");
-- 
cgit v1.2.3


From 6d1d1698966ab6a5ac7ddcb16602ffebcf97f887 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:12:51 +0100
Subject: tty-usb-ipw: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ipw.c | 279 ++++++++++++++++++++++++-----------------------
 1 file changed, 144 insertions(+), 135 deletions(-)

diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index a89ebfe9e91..a842025b9b5 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -10,27 +10,27 @@
  *   (at your option) any later version.
  *
  * All information about the device was acquired using SnoopyPro
- * on MSFT's O/S, and examing the MSFT drivers' debug output 
+ * on MSFT's O/S, and examing the MSFT drivers' debug output
  * (insanely left _on_ in the enduser version)
  *
  * It was written out of frustration with the IPWireless USB modem
  * supplied by Axity3G/Sentech South Africa not supporting
  * Linux whatsoever.
  *
- * Nobody provided any proprietary information that was not already 
+ * Nobody provided any proprietary information that was not already
  * available for this device.
- * 
- * The modem adheres to the "3GPP TS  27.007 AT command set for 3G 
- * User Equipment (UE)" standard, available from 
+ *
+ * The modem adheres to the "3GPP TS  27.007 AT command set for 3G
+ * User Equipment (UE)" standard, available from
  * http://www.3gpp.org/ftp/Specs/html-info/27007.htm
  *
  * The code was only tested the IPWireless handheld modem distributed
  * in South Africa by Sentech.
- * 
+ *
  * It may work for Woosh Inc in .nz too, as it appears they use the
  * same kit.
  *
- * There is still some work to be done in terms of handling 
+ * There is still some work to be done in terms of handling
  * DCD, DTR, RTS, CTS which are currently faked.
  * It's good enough for PPP at this point. It's based off all kinds of
  * code found in usb/serial and usb/class
@@ -47,7 +47,7 @@
 #include <linux/spinlock.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 /*
  * Version Information
@@ -64,7 +64,7 @@
 
 /* Message sizes */
 #define EVENT_BUFFER_SIZE	0xFF
-#define CHAR2INT16(c1,c0)	(((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
+#define CHAR2INT16(c1, c0)	(((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
 #define NUM_BULK_URBS		24
 #define NUM_CONTROL_URBS	16
 
@@ -94,33 +94,34 @@ enum {
 
 /* data bits */
 #define ipw_dtb_7		0x700
-#define ipw_dtb_8		0x810	// ok so the define is misleading, I know, but forces 8,n,1
-					// I mean, is there a point to any other setting these days? :)	
+#define ipw_dtb_8		0x810	/* ok so the define is misleading, I know, but forces 8,n,1 */
+					/* I mean, is there a point to any other setting these days? :) */
 
 /* usb control request types : */
-#define IPW_SIO_RXCTL		0x00	// control bulk rx channel transmissions, value=1/0 (on/off)
-#define IPW_SIO_SET_BAUD	0x01	// set baud, value=requested ipw_sio_bxxxx
-#define IPW_SIO_SET_LINE	0x03	// set databits, parity. value=ipw_dtb_x
-#define IPW_SIO_SET_PIN		0x03	// set/clear dtr/rts value=ipw_pin_xxx
-#define IPW_SIO_POLL		0x08	// get serial port status byte, call with value=0
-#define IPW_SIO_INIT		0x11	// initializes ? value=0 (appears as first thing todo on open)
-#define IPW_SIO_PURGE		0x12	// purge all transmissions?, call with value=numchar_to_purge
-#define IPW_SIO_HANDFLOW	0x13	// set xon/xoff limits value=0, and a buffer of 0x10 bytes
-#define IPW_SIO_SETCHARS	0x13	// set the flowcontrol special chars, value=0, buf=6 bytes, 
-					// last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13
+#define IPW_SIO_RXCTL		0x00	/* control bulk rx channel transmissions, value=1/0 (on/off) */
+#define IPW_SIO_SET_BAUD	0x01	/* set baud, value=requested ipw_sio_bxxxx */
+#define IPW_SIO_SET_LINE	0x03	/* set databits, parity. value=ipw_dtb_x */
+#define IPW_SIO_SET_PIN		0x03	/* set/clear dtr/rts value=ipw_pin_xxx */
+#define IPW_SIO_POLL		0x08	/* get serial port status byte, call with value=0 */
+#define IPW_SIO_INIT		0x11	/* initializes ? value=0 (appears as first thing todo on open) */
+#define IPW_SIO_PURGE		0x12	/* purge all transmissions?, call with value=numchar_to_purge */
+#define IPW_SIO_HANDFLOW	0x13	/* set xon/xoff limits value=0, and a buffer of 0x10 bytes */
+#define IPW_SIO_SETCHARS	0x13	/* set the flowcontrol special chars, value=0, buf=6 bytes, */
+					/* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */
 
 /* values used for request IPW_SIO_SET_PIN */
 #define IPW_PIN_SETDTR		0x101
 #define IPW_PIN_SETRTS		0x202
 #define IPW_PIN_CLRDTR		0x100
-#define IPW_PIN_CLRRTS		0x200 // unconfirmed
+#define IPW_PIN_CLRRTS		0x200 /* unconfirmed */
 
 /* values used for request IPW_SIO_RXCTL */
 #define IPW_RXBULK_ON		1
 #define IPW_RXBULK_OFF		0
 
 /* various 16 byte hardcoded transferbuffers used by flow control */
-#define IPW_BYTES_FLOWINIT	{ 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+#define IPW_BYTES_FLOWINIT	{ 0x01, 0, 0, 0, 0x40, 0, 0, 0, \
+					0, 0, 0, 0, 0, 0, 0, 0 }
 
 /* Interpretation of modem status lines */
 /* These need sorting out by individually connecting pins and checking
@@ -132,17 +133,6 @@ enum {
 #define IPW_CTS			((1<<5) | (1<<4))
 
 #define IPW_WANTS_TO_SEND	0x30
-//#define IPW_DTR			/* Data Terminal Ready */
-//#define IPW_CTS			/* Clear To Send */
-//#define IPW_CD			/* Carrier Detect */
-//#define IPW_DSR			/* Data Set Ready */
-//#define IPW_RxD			/* Receive pin */
-
-//#define IPW_LE
-//#define IPW_RTS		
-//#define IPW_ST		
-//#define IPW_SR		
-//#define IPW_RI			/* Ring Indicator */
 
 static struct usb_device_id usb_ipw_ids[] = {
 	{ USB_DEVICE(IPW_VID, IPW_PID) },
@@ -177,7 +167,8 @@ static void ipw_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+					urb->actual_length, data);
 
 	tty = port->port.tty;
 	if (tty && urb->actual_length) {
@@ -187,15 +178,17 @@ static void ipw_read_bulk_callback(struct urb *urb)
 	}
 
 	/* Continue trying to always read  */
-	usb_fill_bulk_urb (port->read_urb, port->serial->dev,
-			   usb_rcvbulkpipe(port->serial->dev,
+	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+			  usb_rcvbulkpipe(port->serial->dev,
 					   port->bulk_in_endpointAddress),
-			   port->read_urb->transfer_buffer,
-			   port->read_urb->transfer_buffer_length,
-			   ipw_read_bulk_callback, port);
+			  port->read_urb->transfer_buffer,
+			  port->read_urb->transfer_buffer_length,
+			  ipw_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	if (result)
-		dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+							__func__, result);
 	return;
 }
 
@@ -216,26 +209,30 @@ static int ipw_open(struct tty_struct *tty,
 	if (tty)
 		tty->low_latency = 1;
 
-	/* --1: Tell the modem to initialize (we think) From sniffs this is always the
-	 * first thing that gets sent to the modem during opening of the device */
-	dbg("%s: Sending SIO_INIT (we guess)",__func__);
-	result = usb_control_msg(dev, usb_sndctrlpipe(dev,0),
-				 IPW_SIO_INIT,
-				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				 0,
-				 0, /* index */
-				 NULL,
-				 0,
-				 100000);
+	/* --1: Tell the modem to initialize (we think) From sniffs this is
+	 *	always the first thing that gets sent to the modem during
+	 *	opening of the device */
+	dbg("%s: Sending SIO_INIT (we guess)", __func__);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			 IPW_SIO_INIT,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 0,
+			 0, /* index */
+			 NULL,
+			 0,
+			 100000);
 	if (result < 0)
-		dev_err(&port->dev, "Init of modem failed (error = %d)\n", result);
+		dev_err(&port->dev,
+			"Init of modem failed (error = %d)\n", result);
 
 	/* reset the bulk pipes */
-	usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
-	usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
+	usb_clear_halt(dev,
+			usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
+	usb_clear_halt(dev,
+			usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
 
-	/*--2: Start reading from the device */	
-	dbg("%s: setting up bulk read callback",__func__);
+	/*--2: Start reading from the device */
+	dbg("%s: setting up bulk read callback", __func__);
 	usb_fill_bulk_urb(port->read_urb, dev,
 			  usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
 			  port->bulk_in_buffer,
@@ -243,67 +240,72 @@ static int ipw_open(struct tty_struct *tty,
 			  ipw_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result < 0)
-		dbg("%s - usb_submit_urb(read bulk) failed with status %d", __func__, result);
+		dbg("%s - usb_submit_urb(read bulk) failed with status %d",
+							__func__, result);
 
 	/*--3: Tell the modem to open the floodgates on the rx bulk channel */
-	dbg("%s:asking modem for RxRead (RXBULK_ON)",__func__);
+	dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 IPW_SIO_RXCTL,
-				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				 IPW_RXBULK_ON,
-				 0, /* index */
-				 NULL,
-				 0,
-				 100000);
-	if (result < 0) 
-		dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result);
+			 IPW_SIO_RXCTL,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_RXBULK_ON,
+			 0, /* index */
+			 NULL,
+			 0,
+			 100000);
+	if (result < 0)
+		dev_err(&port->dev,
+			"Enabling bulk RxRead failed (error = %d)\n", result);
 
 	/*--4: setup the initial flowcontrol */
-	dbg("%s:setting init flowcontrol (%s)",__func__,buf_flow_init);
+	dbg("%s:setting init flowcontrol (%s)", __func__, buf_flow_init);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 IPW_SIO_HANDFLOW,
-				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				 0,
-				 0,
-				 buf_flow_init,
-				 0x10,
-				 200000);
+			 IPW_SIO_HANDFLOW,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 0,
+			 0,
+			 buf_flow_init,
+			 0x10,
+			 200000);
 	if (result < 0)
-		dev_err(&port->dev, "initial flowcontrol failed (error = %d)\n", result);
+		dev_err(&port->dev,
+			"initial flowcontrol failed (error = %d)\n", result);
 
 
 	/*--5: raise the dtr */
-	dbg("%s:raising dtr",__func__);
+	dbg("%s:raising dtr", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 IPW_SIO_SET_PIN,
-				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				 IPW_PIN_SETDTR,
-				 0,
-				 NULL,
-				 0,
-				 200000);
+			 IPW_SIO_SET_PIN,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_PIN_SETDTR,
+			 0,
+			 NULL,
+			 0,
+			 200000);
 	if (result < 0)
-		dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
+		dev_err(&port->dev,
+				"setting dtr failed (error = %d)\n", result);
 
 	/*--6: raise the rts */
-	dbg("%s:raising rts",__func__);
+	dbg("%s:raising rts", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 IPW_SIO_SET_PIN,
-				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				 IPW_PIN_SETRTS,
-				 0,
-				 NULL,
-				 0,
-				 200000);
+			 IPW_SIO_SET_PIN,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_PIN_SETRTS,
+			 0,
+			 NULL,
+			 0,
+			 200000);
 	if (result < 0)
-		dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
-	
+		dev_err(&port->dev,
+				"setting dtr failed (error = %d)\n", result);
+
 	kfree(buf_flow_init);
 	return 0;
 }
 
 static void ipw_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_device *dev = port->serial->dev;
 	int result;
@@ -314,56 +316,62 @@ static void ipw_close(struct tty_struct *tty,
 	}
 
 	/*--1: drop the dtr */
-	dbg("%s:dropping dtr",__func__);
+	dbg("%s:dropping dtr", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 IPW_SIO_SET_PIN,
-				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				 IPW_PIN_CLRDTR,
-				 0,
-				 NULL,
-				 0,
-				 200000);
+			 IPW_SIO_SET_PIN,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_PIN_CLRDTR,
+			 0,
+			 NULL,
+			 0,
+			 200000);
 	if (result < 0)
-		dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result);
+		dev_err(&port->dev, "dropping dtr failed (error = %d)\n",
+								result);
 
 	/*--2: drop the rts */
-	dbg("%s:dropping rts",__func__);
+	dbg("%s:dropping rts", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				 IPW_PIN_CLRRTS,
-				 0,
-				 NULL,
-				 0,
-				 200000);
+			 IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
+			 		USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_PIN_CLRRTS,
+			 0,
+			 NULL,
+			 0,
+			 200000);
 	if (result < 0)
-		dev_err(&port->dev, "dropping rts failed (error = %d)\n", result);
+		dev_err(&port->dev,
+				"dropping rts failed (error = %d)\n", result);
 
 
 	/*--3: purge */
-	dbg("%s:sending purge",__func__);
+	dbg("%s:sending purge", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				 0x03,
-				 0,
-				 NULL,
-				 0,
-				 200000);
+			 IPW_SIO_PURGE, USB_TYPE_VENDOR |
+			 		USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 0x03,
+			 0,
+			 NULL,
+			 0,
+			 200000);
 	if (result < 0)
 		dev_err(&port->dev, "purge failed (error = %d)\n", result);
 
 
-	/* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
+	/* send RXBULK_off (tell modem to stop transmitting bulk data on
+	   rx chan) */
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 IPW_SIO_RXCTL,
-				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				 IPW_RXBULK_OFF,
-				 0, /* index */
-				 NULL,
-				 0,
-				 100000);
+			 IPW_SIO_RXCTL,
+			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			 IPW_RXBULK_OFF,
+			 0, /* index */
+			 NULL,
+			 0,
+			 100000);
 
 	if (result < 0)
-		dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result);
+		dev_err(&port->dev,
+			"Disabling bulk RxRead failed (error = %d)\n", result);
 
 	/* shutdown any in-flight urbs that we know about */
 	usb_kill_urb(port->read_urb);
@@ -393,7 +401,7 @@ static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
 	int ret;
 
 	dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__,
-		count, in_interrupt() );
+		count, in_interrupt());
 
 	if (count == 0) {
 		dbg("%s - write request of 0 bytes", __func__);
@@ -424,13 +432,14 @@ static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
 	ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (ret != 0) {
 		port->write_urb_busy = 0;
-		dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __func__, ret);
+		dbg("%s - usb_submit_urb(write bulk) failed with error = %d",
+								__func__, ret);
 		return ret;
 	}
 
 	dbg("%s returning %d", __func__, count);
 	return count;
-} 
+}
 
 static int ipw_probe(struct usb_serial_port *port)
 {
@@ -489,8 +498,8 @@ module_init(usb_ipw_init);
 module_exit(usb_ipw_exit);
 
 /* Module information */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From 9e8e2d2ab58ee942b700a9453541d7539b704994 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:12:59 +0100
Subject: tty-usb-iuu-phoenix: Clean up to coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/iuu_phoenix.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index d6541488834..ddff37fa633 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -318,11 +318,10 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 					 port->bulk_out_endpointAddress), buf,
 			 count, &actual, HZ * 1);
 
-	if (status != IUU_OPERATION_OK) {
+	if (status != IUU_OPERATION_OK)
 		dbg("%s - error = %2x", __func__, status);
-	} else {
+	else
 		dbg("%s - write OK !", __func__);
-	}
 	return status;
 }
 
@@ -342,12 +341,10 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 					 port->bulk_in_endpointAddress), buf,
 			 count, &actual, HZ * 1);
 
-	if (status != IUU_OPERATION_OK) {
+	if (status != IUU_OPERATION_OK)
 		dbg("%s - error = %2x", __func__, status);
-	} else {
+	else
 		dbg("%s - read OK !", __func__);
-	}
-
 	return status;
 }
 
@@ -770,14 +767,14 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (priv->writelen > 0) {
 		/* buffer already filled but not commited */
 		spin_unlock_irqrestore(&priv->lock, flags);
-		return (0);
+		return 0;
 	}
 	/* fill the buffer */
 	memcpy(priv->writebuf, buf, count);
 	priv->writelen = count;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return (count);
+	return count;
 }
 
 static void read_rxcmd_callback(struct urb *urb)
-- 
cgit v1.2.3


From deb91685784fc0bc845c582f8b2bc229cb7bc9da Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:13:08 +0100
Subject: tty-usb-keyspan: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/keyspan.c | 825 ++++++++++++++++++++++---------------------
 1 file changed, 418 insertions(+), 407 deletions(-)

diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index a371c41bb3a..2b1cfcbf8f9 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1,29 +1,29 @@
 /*
   Keyspan USB to Serial Converter driver
- 
+
   (C) Copyright (C) 2000-2001	Hugh Blemings <hugh@blemings.org>
   (C) Copyright (C) 2002	Greg Kroah-Hartman <greg@kroah.com>
-   
+
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.
 
   See http://misc.nu/hugh/keyspan.html for more information.
-  
+
   Code in this driver inspired by and in a number of places taken
   from Brian Warner's original Keyspan-PDA driver.
 
   This driver has been put together with the support of Innosys, Inc.
   and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
   Thanks Guys :)
-  
+
   Thanks to Paulus for miscellaneous tidy ups, some largish chunks
   of much nicer and/or completely new code and (perhaps most uniquely)
   having the patience to sit down and explain why and where he'd changed
-  stuff. 
-  
-  Tip 'o the hat to IBM (and previously Linuxcare :) for supporting 
+  stuff.
+
+  Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
   staff in their work on open source projects.
 
   Change History
@@ -70,21 +70,21 @@
 
     Thu May 31 11:56:42 PDT 2001 gkh
       switched from using spinlock to a semaphore
-   
+
     (04/08/2001) gb
 	Identify version on module load.
-   
+
     (11/01/2000) Adam J. Richter
 	usb_device_id table support.
-   
+
     Tue Oct 10 23:15:33 EST 2000 Hugh
       Merged Paul's changes with my USA-49W mods.  Work in progress
       still...
-  
+
     Wed Jul 19 14:00:42 EST 2000 gkh
       Added module_init and module_exit functions to handle the fact that
       this driver is a loadable module now.
- 
+
     Tue Jul 18 16:14:52 EST 2000 Hugh
       Basic character input/output for USA-19 now mostly works,
       fixed at 9600 baud for the moment.
@@ -107,7 +107,7 @@
 #include <linux/spinlock.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "keyspan.h"
@@ -132,15 +132,15 @@ struct keyspan_serial_private {
 	struct urb	*instat_urb;
 	char		instat_buf[INSTAT_BUFLEN];
 
-	/* added to support 49wg, where data from all 4 ports comes in on 1 EP */
-	/* and high-speed supported */
+	/* added to support 49wg, where data from all 4 ports comes in
+	   on 1 EP and high-speed supported */
 	struct urb	*indat_urb;
 	char		indat_buf[INDAT49W_BUFLEN];
 
 	/* XXX this one probably will need a lock */
 	struct urb	*glocont_urb;
 	char		glocont_buf[GLOCONT_BUFLEN];
-	char		ctrl_buf[8];			// for EP0 control message
+	char		ctrl_buf[8];	/* for EP0 control message */
 };
 
 struct keyspan_port_private {
@@ -186,19 +186,19 @@ struct keyspan_port_private {
 	int		resend_cont;	/* need to resend control packet */
 };
 
-	
 /* Include Keyspan message headers.  All current Keyspan Adapters
    make use of one of five message formats which are referred
-   to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and within this driver. */
+   to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and
+   within this driver. */
 #include "keyspan_usa26msg.h"
 #include "keyspan_usa28msg.h"
 #include "keyspan_usa49msg.h"
 #include "keyspan_usa90msg.h"
 #include "keyspan_usa67msg.h"
-	
+
 
 /* Functions used by new usb-serial code. */
-static int __init keyspan_init (void)
+static int __init keyspan_init(void)
 {
 	int retval;
 	retval = usb_serial_register(&keyspan_pre_device);
@@ -214,7 +214,7 @@ static int __init keyspan_init (void)
 	if (retval)
 		goto failed_4port_device_register;
 	retval = usb_register(&keyspan_driver);
-	if (retval) 
+	if (retval)
 		goto failed_usb_register;
 
 	info(DRIVER_VERSION ":" DRIVER_DESC);
@@ -232,13 +232,13 @@ failed_pre_device_register:
 	return retval;
 }
 
-static void __exit keyspan_exit (void)
+static void __exit keyspan_exit(void)
 {
-	usb_deregister (&keyspan_driver);
-	usb_serial_deregister (&keyspan_pre_device);
-	usb_serial_deregister (&keyspan_1port_device);
-	usb_serial_deregister (&keyspan_2port_device);
-	usb_serial_deregister (&keyspan_4port_device);
+	usb_deregister(&keyspan_driver);
+	usb_serial_deregister(&keyspan_pre_device);
+	usb_serial_deregister(&keyspan_1port_device);
+	usb_serial_deregister(&keyspan_2port_device);
+	usb_serial_deregister(&keyspan_4port_device);
 }
 
 module_init(keyspan_init);
@@ -249,7 +249,7 @@ static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
 	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_port_private 	*p_priv;
 
- 	dbg("%s", __func__);
+	dbg("%s", __func__);
 
 	p_priv = usb_get_serial_port_data(port);
 
@@ -262,7 +262,7 @@ static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
 }
 
 
-static void keyspan_set_termios (struct tty_struct *tty,
+static void keyspan_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	int				baud_rate, device_port;
@@ -280,7 +280,7 @@ static void keyspan_set_termios (struct tty_struct *tty,
 	/* Baud rate calculation takes baud rate as an integer
 	   so other rates can be generated if desired. */
 	baud_rate = tty_get_baud_rate(tty);
-	/* If no match or invalid, don't change */		
+	/* If no match or invalid, don't change */
 	if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
 				NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
 		/* FIXME - more to do here to ensure rate changes cleanly */
@@ -305,13 +305,13 @@ static int keyspan_tiocmget(struct tty_struct *tty, struct file *file)
 	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
 	unsigned int			value;
-	
+
 	value = ((p_priv->rts_state) ? TIOCM_RTS : 0) |
 		((p_priv->dtr_state) ? TIOCM_DTR : 0) |
 		((p_priv->cts_state) ? TIOCM_CTS : 0) |
 		((p_priv->dsr_state) ? TIOCM_DSR : 0) |
 		((p_priv->dcd_state) ? TIOCM_CAR : 0) |
-		((p_priv->ri_state) ? TIOCM_RNG : 0); 
+		((p_priv->ri_state) ? TIOCM_RNG : 0);
 
 	return value;
 }
@@ -321,7 +321,7 @@ static int keyspan_tiocmset(struct tty_struct *tty, struct file *file,
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
-	
+
 	if (set & TIOCM_RTS)
 		p_priv->rts_state = 1;
 	if (set & TIOCM_DTR)
@@ -344,19 +344,19 @@ static int keyspan_write(struct tty_struct *tty,
 	int				flip;
 	int 				left, todo;
 	struct urb			*this_urb;
- 	int 				err, maxDataLen, dataOffset;
+	int 				err, maxDataLen, dataOffset;
 
 	p_priv = usb_get_serial_port_data(port);
 	d_details = p_priv->device_details;
 
 	if (d_details->msg_format == msg_usa90) {
-   		maxDataLen = 64;
+		maxDataLen = 64;
 		dataOffset = 0;
 	} else {
 		maxDataLen = 63;
 		dataOffset = 1;
 	}
-	
+
 	dbg("%s - for port %d (%d chars), flip=%d",
 	    __func__, port->number, count, p_priv->out_flip);
 
@@ -366,37 +366,40 @@ static int keyspan_write(struct tty_struct *tty,
 			todo = maxDataLen;
 
 		flip = p_priv->out_flip;
-	
+
 		/* Check we have a valid urb/endpoint before we use it... */
-		if ((this_urb = p_priv->out_urbs[flip]) == NULL) {
+		this_urb = p_priv->out_urbs[flip];
+		if (this_urb == NULL) {
 			/* no bulk out, so return 0 bytes written */
 			dbg("%s - no output urb :(", __func__);
 			return count;
 		}
 
-		dbg("%s - endpoint %d flip %d", __func__, usb_pipeendpoint(this_urb->pipe), flip);
+		dbg("%s - endpoint %d flip %d",
+			__func__, usb_pipeendpoint(this_urb->pipe), flip);
 
 		if (this_urb->status == -EINPROGRESS) {
-			if (time_before(jiffies, p_priv->tx_start_time[flip] + 10 * HZ))
+			if (time_before(jiffies,
+					p_priv->tx_start_time[flip] + 10 * HZ))
 				break;
 			usb_unlink_urb(this_urb);
 			break;
 		}
 
-		/* First byte in buffer is "last flag" (except for usa19hx) - unused so
-		   for now so set to zero */
+		/* First byte in buffer is "last flag" (except for usa19hx)
+		   - unused so for now so set to zero */
 		((char *)this_urb->transfer_buffer)[0] = 0;
 
-		memcpy (this_urb->transfer_buffer + dataOffset, buf, todo);
+		memcpy(this_urb->transfer_buffer + dataOffset, buf, todo);
 		buf += todo;
 
 		/* send the data out the bulk port */
 		this_urb->transfer_buffer_length = todo + dataOffset;
 
 		this_urb->dev = port->serial->dev;
-		if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
+		err = usb_submit_urb(this_urb, GFP_ATOMIC);
+		if (err != 0)
 			dbg("usb_submit_urb(write bulk) failed (%d)", err);
-		}
 		p_priv->tx_start_time[flip] = jiffies;
 
 		/* Flip for next time if usa26 or usa28 interface
@@ -416,7 +419,7 @@ static void	usa26_indat_callback(struct urb *urb)
 	unsigned char 		*data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	endpoint = usb_pipeendpoint(urb->pipe);
 
@@ -431,13 +434,14 @@ static void	usa26_indat_callback(struct urb *urb)
 	if (tty && urb->actual_length) {
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
-			/* no errors on individual bytes, only possible overrun err*/
+			/* no errors on individual bytes, only
+			   possible overrun err */
 			if (data[0] & RXERROR_OVERRUN)
-					err = TTY_OVERRUN;
-			else err = 0;
-			for (i = 1; i < urb->actual_length ; ++i) {
+				err = TTY_OVERRUN;
+			else
+				err = 0;
+			for (i = 1; i < urb->actual_length ; ++i)
 				tty_insert_flip_char(tty, data[i], err);
-			}
 		} else {
 			/* some bytes had errors, every byte has status */
 			dbg("%s - RX error!!!!", __func__);
@@ -455,17 +459,19 @@ static void	usa26_indat_callback(struct urb *urb)
 		}
 		tty_flip_buffer_push(tty);
 	}
-				
-		/* Resubmit urb so we continue receiving */
+
+	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->port.count)
-		if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
-			dbg("%s - resubmit read urb failed. (%d)", __func__, err);
-		}
+	if (port->port.count) {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err != 0)
+			dbg("%s - resubmit read urb failed. (%d)",
+					__func__, err);
+	}
 	return;
 }
 
- 	/* Outdat handling is common for all devices */
+/* Outdat handling is common for all devices */
 static void	usa2x_outdat_callback(struct urb *urb)
 {
 	struct usb_serial_port *port;
@@ -473,7 +479,7 @@ static void	usa2x_outdat_callback(struct urb *urb)
 
 	port =  urb->context;
 	p_priv = usb_get_serial_port_data(port);
-	dbg ("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
+	dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
 
 	if (port->port.count)
 		usb_serial_port_softint(port);
@@ -481,8 +487,8 @@ static void	usa2x_outdat_callback(struct urb *urb)
 
 static void	usa26_inack_callback(struct urb *urb)
 {
-	dbg ("%s", __func__);
-	
+	dbg("%s", __func__);
+
 }
 
 static void	usa26_outcont_callback(struct urb *urb)
@@ -494,8 +500,9 @@ static void	usa26_outcont_callback(struct urb *urb)
 	p_priv = usb_get_serial_port_data(port);
 
 	if (p_priv->resend_cont) {
-		dbg ("%s - sending setup", __func__);
-		keyspan_usa26_send_setup(port->serial, port, p_priv->resend_cont - 1);
+		dbg("%s - sending setup", __func__);
+		keyspan_usa26_send_setup(port->serial, port,
+						p_priv->resend_cont - 1);
 	}
 }
 
@@ -531,14 +538,14 @@ static void	usa26_instat_callback(struct urb *urb)
 	/* Now do something useful with the data */
 
 
-	/* Check port number from message and retrieve private data */	
+	/* Check port number from message and retrieve private data */
 	if (msg->port >= serial->num_ports) {
-		dbg ("%s - Unexpected port number %d", __func__, msg->port);
+		dbg("%s - Unexpected port number %d", __func__, msg->port);
 		goto exit;
 	}
 	port = serial->port[msg->port];
 	p_priv = usb_get_serial_port_data(port);
-	
+
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
 	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
@@ -553,19 +560,18 @@ static void	usa26_instat_callback(struct urb *urb)
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
-	
+
 	/* Resubmit urb so we continue receiving */
 	urb->dev = serial->dev;
-	if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
-	}
 exit: ;
 }
 
 static void	usa26_glocont_callback(struct urb *urb)
 {
-	dbg ("%s", __func__);
-	
+	dbg("%s", __func__);
 }
 
 
@@ -578,7 +584,7 @@ static void usa28_indat_callback(struct urb *urb)
 	struct keyspan_port_private             *p_priv;
 	int status = urb->status;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	port =  urb->context;
 	p_priv = usb_get_serial_port_data(port);
@@ -600,18 +606,19 @@ static void usa28_indat_callback(struct urb *urb)
 
 		tty = port->port.tty;
 		if (urb->actual_length) {
-			for (i = 0; i < urb->actual_length ; ++i) {
+			for (i = 0; i < urb->actual_length ; ++i)
 				tty_insert_flip_char(tty, data[i], 0);
-			}
 			tty_flip_buffer_push(tty);
 		}
 
 		/* Resubmit urb so we continue receiving */
 		urb->dev = port->serial->dev;
-		if (port->port.count)
-			if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
-				dbg("%s - resubmit read urb failed. (%d)", __func__, err);
-			}
+		if (port->port.count) {
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err != 0)
+				dbg("%s - resubmit read urb failed. (%d)",
+								__func__, err);
+		}
 		p_priv->in_flip ^= 1;
 
 		urb = p_priv->in_urbs[p_priv->in_flip];
@@ -620,7 +627,7 @@ static void usa28_indat_callback(struct urb *urb)
 
 static void	usa28_inack_callback(struct urb *urb)
 {
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 }
 
 static void	usa28_outcont_callback(struct urb *urb)
@@ -632,8 +639,9 @@ static void	usa28_outcont_callback(struct urb *urb)
 	p_priv = usb_get_serial_port_data(port);
 
 	if (p_priv->resend_cont) {
-		dbg ("%s - sending setup", __func__);
-		keyspan_usa28_send_setup(port->serial, port, p_priv->resend_cont - 1);
+		dbg("%s - sending setup", __func__);
+		keyspan_usa28_send_setup(port->serial, port,
+						p_priv->resend_cont - 1);
 	}
 }
 
@@ -663,19 +671,18 @@ static void	usa28_instat_callback(struct urb *urb)
 	/*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__
 	    data[0], data[1], data[2], data[3], data[4], data[5],
 	    data[6], data[7], data[8], data[9], data[10], data[11]);*/
-	
-		/* Now do something useful with the data */
-	msg = (struct keyspan_usa28_portStatusMessage *)data;
 
+	/* Now do something useful with the data */
+	msg = (struct keyspan_usa28_portStatusMessage *)data;
 
-		/* Check port number from message and retrieve private data */	
+	/* Check port number from message and retrieve private data */
 	if (msg->port >= serial->num_ports) {
-		dbg ("%s - Unexpected port number %d", __func__, msg->port);
+		dbg("%s - Unexpected port number %d", __func__, msg->port);
 		goto exit;
 	}
 	port = serial->port[msg->port];
 	p_priv = usb_get_serial_port_data(port);
-	
+
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
 	p_priv->cts_state = ((msg->cts) ? 1 : 0);
@@ -693,15 +700,15 @@ static void	usa28_instat_callback(struct urb *urb)
 
 		/* Resubmit urb so we continue receiving */
 	urb->dev = serial->dev;
-	if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
-	}
 exit: ;
 }
 
 static void	usa28_glocont_callback(struct urb *urb)
 {
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 }
 
 
@@ -712,7 +719,7 @@ static void	usa49_glocont_callback(struct urb *urb)
 	struct keyspan_port_private *p_priv;
 	int i;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	serial =  urb->context;
 	for (i = 0; i < serial->num_ports; ++i) {
@@ -720,8 +727,9 @@ static void	usa49_glocont_callback(struct urb *urb)
 		p_priv = usb_get_serial_port_data(port);
 
 		if (p_priv->resend_cont) {
-			dbg ("%s - sending setup", __func__);
-			keyspan_usa49_send_setup(serial, port, p_priv->resend_cont - 1);
+			dbg("%s - sending setup", __func__);
+			keyspan_usa49_send_setup(serial, port,
+						p_priv->resend_cont - 1);
 			break;
 		}
 	}
@@ -740,7 +748,7 @@ static void	usa49_instat_callback(struct urb *urb)
 	int old_dcd_state;
 	int status = urb->status;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	serial =  urb->context;
 
@@ -749,7 +757,8 @@ static void	usa49_instat_callback(struct urb *urb)
 		return;
 	}
 
-	if (urb->actual_length != sizeof(struct keyspan_usa49_portStatusMessage)) {
+	if (urb->actual_length !=
+			sizeof(struct keyspan_usa49_portStatusMessage)) {
 		dbg("%s - bad length %d", __func__, urb->actual_length);
 		goto exit;
 	}
@@ -757,18 +766,19 @@ static void	usa49_instat_callback(struct urb *urb)
 	/*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__,
 	    data[0], data[1], data[2], data[3], data[4], data[5],
 	    data[6], data[7], data[8], data[9], data[10]);*/
-	
-		/* Now do something useful with the data */
+
+	/* Now do something useful with the data */
 	msg = (struct keyspan_usa49_portStatusMessage *)data;
 
-		/* Check port number from message and retrieve private data */	
+	/* Check port number from message and retrieve private data */
 	if (msg->portNumber >= serial->num_ports) {
-		dbg ("%s - Unexpected port number %d", __func__, msg->portNumber);
+		dbg("%s - Unexpected port number %d",
+					__func__, msg->portNumber);
 		goto exit;
 	}
 	port = serial->port[msg->portNumber];
 	p_priv = usb_get_serial_port_data(port);
-	
+
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
 	p_priv->cts_state = ((msg->cts) ? 1 : 0);
@@ -784,18 +794,18 @@ static void	usa49_instat_callback(struct urb *urb)
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
 
-		/* Resubmit urb so we continue receiving */
+	/* Resubmit urb so we continue receiving */
 	urb->dev = serial->dev;
 
-	if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
-	}
 exit:	;
 }
 
 static void	usa49_inack_callback(struct urb *urb)
 {
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 }
 
 static void	usa49_indat_callback(struct urb *urb)
@@ -807,7 +817,7 @@ static void	usa49_indat_callback(struct urb *urb)
 	unsigned char 		*data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	endpoint = usb_pipeendpoint(urb->pipe);
 
@@ -823,9 +833,8 @@ static void	usa49_indat_callback(struct urb *urb)
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
 			/* no error on any byte */
-			for (i = 1; i < urb->actual_length ; ++i) {
+			for (i = 1; i < urb->actual_length ; ++i)
 				tty_insert_flip_char(tty, data[i], 0);
-			}
 		} else {
 			/* some bytes had errors, every byte has status */
 			for (i = 0; i + 1 < urb->actual_length; i += 2) {
@@ -842,13 +851,15 @@ static void	usa49_indat_callback(struct urb *urb)
 		}
 		tty_flip_buffer_push(tty);
 	}
-				
-		/* Resubmit urb so we continue receiving */
+
+	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->port.count)
-		if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
-			dbg("%s - resubmit read urb failed. (%d)", __func__, err);
-		}
+	if (port->port.count) {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err != 0)
+			dbg("%s - resubmit read urb failed. (%d)",
+							__func__, err);
+	}
 }
 
 static void usa49wg_indat_callback(struct urb *urb)
@@ -860,7 +871,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 	unsigned char 		*data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	serial = urb->context;
 
@@ -878,7 +889,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 
 			/* Check port number from message*/
 			if (data[i] >= serial->num_ports) {
-				dbg ("%s - Unexpected port number %d",
+				dbg("%s - Unexpected port number %d",
 					__func__, data[i]);
 				return;
 			}
@@ -931,7 +942,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 /* not used, usa-49 doesn't have per-port control endpoints */
 static void usa49_outcont_callback(struct urb *urb)
 {
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 }
 
 static void usa90_indat_callback(struct urb *urb)
@@ -944,7 +955,7 @@ static void usa90_indat_callback(struct urb *urb)
 	unsigned char 		*data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	endpoint = usb_pipeendpoint(urb->pipe);
 
@@ -959,27 +970,25 @@ static void usa90_indat_callback(struct urb *urb)
 
 	tty = port->port.tty;
 	if (urb->actual_length) {
-	
 		/* if current mode is DMA, looks like usa28 format
-	   		otherwise looks like usa26 data format */
+		   otherwise looks like usa26 data format */
 
 		if (p_priv->baud > 57600) {
-			for (i = 0; i < urb->actual_length ; ++i) 
+			for (i = 0; i < urb->actual_length ; ++i)
 				tty_insert_flip_char(tty, data[i], 0);
-		}
-		else {
-			
+		} else {
 			/* 0x80 bit is error flag */
 			if ((data[0] & 0x80) == 0) {
-				/* no errors on individual bytes, only possible overrun err*/
+				/* no errors on individual bytes, only
+				   possible overrun err*/
 				if (data[0] & RXERROR_OVERRUN)
-						err = TTY_OVERRUN;
-				else err = 0;
-				for (i = 1; i < urb->actual_length ; ++i) 
-					tty_insert_flip_char(tty, data[i], err);
-			
-			} 
-			else {
+					err = TTY_OVERRUN;
+				else
+					err = 0;
+				for (i = 1; i < urb->actual_length ; ++i)
+					tty_insert_flip_char(tty, data[i],
+									err);
+			}  else {
 			/* some bytes had errors, every byte has status */
 				dbg("%s - RX error!!!!", __func__);
 				for (i = 0; i + 1 < urb->actual_length; i += 2) {
@@ -991,19 +1000,22 @@ static void usa90_indat_callback(struct urb *urb)
 					if (stat & RXERROR_PARITY)
 						flag |= TTY_PARITY;
 					/* XXX should handle break (0x10) */
-					tty_insert_flip_char(tty, data[i+1], flag);
+					tty_insert_flip_char(tty, data[i+1],
+									flag);
 				}
 			}
 		}
 		tty_flip_buffer_push(tty);
 	}
-				
+
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->port.count)
-		if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
-			dbg("%s - resubmit read urb failed. (%d)", __func__, err);
-		}
+	if (port->port.count) {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err != 0)
+			dbg("%s - resubmit read urb failed. (%d)",
+							__func__, err);
+	}
 	return;
 }
 
@@ -1035,7 +1047,7 @@ static void	usa90_instat_callback(struct urb *urb)
 
 	port = serial->port[0];
 	p_priv = usb_get_serial_port_data(port);
-	
+
 	/* Update handshaking pin state information */
 	old_dcd_state = p_priv->dcd_state;
 	p_priv->cts_state = ((msg->cts) ? 1 : 0);
@@ -1050,12 +1062,12 @@ static void	usa90_instat_callback(struct urb *urb)
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
-	
+
 	/* Resubmit urb so we continue receiving */
 	urb->dev = serial->dev;
-	if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
 		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
-	}
 exit:
 	;
 }
@@ -1069,8 +1081,9 @@ static void	usa90_outcont_callback(struct urb *urb)
 	p_priv = usb_get_serial_port_data(port);
 
 	if (p_priv->resend_cont) {
-		dbg ("%s - sending setup", __func__);
-		keyspan_usa90_send_setup(port->serial, port, p_priv->resend_cont - 1);
+		dbg("%s - sending setup", __func__);
+		keyspan_usa90_send_setup(port->serial, port,
+						p_priv->resend_cont - 1);
 	}
 }
 
@@ -1086,7 +1099,7 @@ static void	usa67_instat_callback(struct urb *urb)
 	int old_dcd_state;
 	int status = urb->status;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	serial = urb->context;
 
@@ -1095,7 +1108,8 @@ static void	usa67_instat_callback(struct urb *urb)
 		return;
 	}
 
-	if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) {
+	if (urb->actual_length !=
+			sizeof(struct keyspan_usa67_portStatusMessage)) {
 		dbg("%s - bad length %d", __func__, urb->actual_length);
 		return;
 	}
@@ -1106,7 +1120,7 @@ static void	usa67_instat_callback(struct urb *urb)
 
 	/* Check port number from message and retrieve private data */
 	if (msg->port >= serial->num_ports) {
-		dbg ("%s - Unexpected port number %d", __func__, msg->port);
+		dbg("%s - Unexpected port number %d", __func__, msg->port);
 		return;
 	}
 
@@ -1140,7 +1154,7 @@ static void usa67_glocont_callback(struct urb *urb)
 	struct keyspan_port_private *p_priv;
 	int i;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	serial = urb->context;
 	for (i = 0; i < serial->num_ports; ++i) {
@@ -1148,7 +1162,7 @@ static void usa67_glocont_callback(struct urb *urb)
 		p_priv = usb_get_serial_port_data(port);
 
 		if (p_priv->resend_cont) {
-			dbg ("%s - sending setup", __func__);
+			dbg("%s - sending setup", __func__);
 			keyspan_usa67_send_setup(serial, port,
 						p_priv->resend_cont - 1);
 			break;
@@ -1171,20 +1185,23 @@ static int keyspan_write_room(struct tty_struct *tty)
 
 	/* FIXME: locking */
 	if (d_details->msg_format == msg_usa90)
-   		data_len = 64;
+		data_len = 64;
 	else
 		data_len = 63;
 
 	flip = p_priv->out_flip;
 
 	/* Check both endpoints to see if any are available. */
-	if ((this_urb = p_priv->out_urbs[flip]) != NULL) {
+	this_urb = p_priv->out_urbs[flip];
+	if (this_urb != NULL) {
 		if (this_urb->status != -EINPROGRESS)
-			return (data_len);
-		flip = (flip + 1) & d_details->outdat_endp_flip;        
-		if ((this_urb = p_priv->out_urbs[flip]) != NULL) 
+			return data_len;
+		flip = (flip + 1) & d_details->outdat_endp_flip;
+		this_urb = p_priv->out_urbs[flip];
+		if (this_urb != NULL) {
 			if (this_urb->status != -EINPROGRESS)
-				return (data_len);
+				return data_len;
+		}
 	}
 	return 0;
 }
@@ -1222,25 +1239,28 @@ static int keyspan_open(struct tty_struct *tty,
 
 	/* Reset low level data toggle and start reading from endpoints */
 	for (i = 0; i < 2; i++) {
-		if ((urb = p_priv->in_urbs[i]) == NULL)
+		urb = p_priv->in_urbs[i];
+		if (urb == NULL)
 			continue;
 		urb->dev = serial->dev;
 
-		/* make sure endpoint data toggle is synchronized with the device */
-
+		/* make sure endpoint data toggle is synchronized
+		   with the device */
 		usb_clear_halt(urb->dev, urb->pipe);
-
-		if ((err = usb_submit_urb(urb, GFP_KERNEL)) != 0) {
-			dbg("%s - submit urb %d failed (%d)", __func__, i, err);
-		}
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err != 0)
+			dbg("%s - submit urb %d failed (%d)",
+							__func__, i, err);
 	}
 
 	/* Reset low level data toggle on out endpoints */
 	for (i = 0; i < 2; i++) {
-		if ((urb = p_priv->out_urbs[i]) == NULL)
+		urb = p_priv->out_urbs[i];
+		if (urb == NULL)
 			continue;
 		urb->dev = serial->dev;
-		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
+		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+						usb_pipeout(urb->pipe), 0); */
 	}
 
 	/* get the terminal config for the setup message now so we don't
@@ -1264,8 +1284,8 @@ static int keyspan_open(struct tty_struct *tty,
 	p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
 
 	keyspan_send_setup(port, 1);
-	//mdelay(100);
-	//keyspan_set_termios(port, NULL);
+	/* mdelay(100); */
+	/* keyspan_set_termios(port, NULL); */
 
 	return 0;
 }
@@ -1287,15 +1307,15 @@ static void keyspan_close(struct tty_struct *tty,
 	dbg("%s", __func__);
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
-	
+
 	p_priv->rts_state = 0;
 	p_priv->dtr_state = 0;
-	
+
 	if (serial->dev) {
 		keyspan_send_setup(port, 2);
 		/* pilot-xfer seems to work best with this delay */
 		mdelay(100);
-		// keyspan_set_termios(port, NULL);
+		/* keyspan_set_termios(port, NULL); */
 	}
 
 	/*while (p_priv->outcont_urb->status == -EINPROGRESS) {
@@ -1317,8 +1337,8 @@ static void keyspan_close(struct tty_struct *tty,
 	port->port.tty = NULL;
 }
 
-	/* download the firmware to a pre-renumeration device */
-static int keyspan_fake_startup (struct usb_serial *serial)
+/* download the firmware to a pre-renumeration device */
+static int keyspan_fake_startup(struct usb_serial *serial)
 {
 	int 				response;
 	const struct ihex_binrec 	*record;
@@ -1328,10 +1348,11 @@ static int keyspan_fake_startup (struct usb_serial *serial)
 	dbg("Keyspan startup version %04x product %04x",
 	    le16_to_cpu(serial->dev->descriptor.bcdDevice),
 	    le16_to_cpu(serial->dev->descriptor.idProduct));
-	
-	if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) != 0x8000) {
+
+	if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000)
+								!= 0x8000) {
 		dbg("Firmware already loaded.  Quitting.");
-		return(1);
+		return 1;
 	}
 
 		/* Select firmware image on the basis of idProduct */
@@ -1355,11 +1376,11 @@ static int keyspan_fake_startup (struct usb_serial *serial)
 	case keyspan_usa19_pre_product_id:
 		fw_name = "keyspan/usa19.fw";
 		break;
-			     
+
 	case keyspan_usa19qi_pre_product_id:
 		fw_name = "keyspan/usa19qi.fw";
 		break;
-			     
+
 	case keyspan_mpr_pre_product_id:
 		fw_name = "keyspan/mpr.fw";
 		break;
@@ -1367,15 +1388,15 @@ static int keyspan_fake_startup (struct usb_serial *serial)
 	case keyspan_usa19qw_pre_product_id:
 		fw_name = "keyspan/usa19qw.fw";
 		break;
-			     
+
 	case keyspan_usa18x_pre_product_id:
 		fw_name = "keyspan/usa18x.fw";
 		break;
-			     
+
 	case keyspan_usa19w_pre_product_id:
 		fw_name = "keyspan/usa19w.fw";
 		break;
-		
+
 	case keyspan_usa49w_pre_product_id:
 		fw_name = "keyspan/usa49w.fw";
 		break;
@@ -1407,8 +1428,7 @@ static int keyspan_fake_startup (struct usb_serial *serial)
 					     (unsigned char *)record->data,
 					     be16_to_cpu(record->len), 0xa0);
 		if (response < 0) {
-			dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan"
-				"firmware (%d %04X %p %d)\n",
+			dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan firmware (%d %04X %p %d)\n",
 				response, be32_to_cpu(record->addr),
 				record->data, be16_to_cpu(record->len));
 			break;
@@ -1421,7 +1441,7 @@ static int keyspan_fake_startup (struct usb_serial *serial)
 	response = ezusb_set_reset(serial, 0);
 
 	/* we don't want this device to have a driver assigned to it. */
-	return (1);
+	return 1;
 }
 
 /* Helper functions used by keyspan_setup_urbs */
@@ -1443,7 +1463,7 @@ static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *se
 	return NULL;
 }
 
-static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint,
+static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
 				      int dir, void *ctx, char *buf, int len,
 				      void (*callback)(struct urb *))
 {
@@ -1454,10 +1474,10 @@ static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint,
 	if (endpoint == -1)
 		return NULL;		/* endpoint not needed */
 
-	dbg ("%s - alloc for endpoint %d.", __func__, endpoint);
+	dbg("%s - alloc for endpoint %d.", __func__, endpoint);
 	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
 	if (urb == NULL) {
-		dbg ("%s - alloc for endpoint %d failed.", __func__, endpoint);
+		dbg("%s - alloc for endpoint %d failed.", __func__, endpoint);
 		return NULL;
 	}
 
@@ -1530,7 +1550,7 @@ static struct callbacks {
 	}, {
 		/* msg_usa90 callbacks */
 		.instat_callback =	usa90_instat_callback,
-		.glocont_callback =	usa28_glocont_callback,		
+		.glocont_callback =	usa28_glocont_callback,
 		.indat_callback =	usa90_indat_callback,
 		.outdat_callback =	usa2x_outdat_callback,
 		.inack_callback =	usa28_inack_callback,
@@ -1558,16 +1578,16 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
 	struct callbacks		*cback;
 	int				endp;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	s_priv = usb_get_serial_data(serial);
 	d_details = s_priv->device_details;
 
-		/* Setup values for the various callback routines */
+	/* Setup values for the various callback routines */
 	cback = &keyspan_callbacks[d_details->msg_format];
 
-		/* Allocate and set up urbs for each one that is in use, 
-		   starting with instat endpoints */
+	/* Allocate and set up urbs for each one that is in use,
+	   starting with instat endpoints */
 	s_priv->instat_urb = keyspan_setup_urb
 		(serial, d_details->instat_endpoint, USB_DIR_IN,
 		 serial, s_priv->instat_buf, INSTAT_BUFLEN,
@@ -1583,8 +1603,8 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
 		 serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
 		 cback->glocont_callback);
 
-		/* Setup endpoints for each port specific thing */
-	for (i = 0; i < d_details->num_ports; i ++) {
+	/* Setup endpoints for each port specific thing */
+	for (i = 0; i < d_details->num_ports; i++) {
 		port = serial->port[i];
 		p_priv = usb_get_serial_port_data(port);
 
@@ -1620,8 +1640,7 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
 			(serial, d_details->outcont_endpoints[i], USB_DIR_OUT,
 			 port, p_priv->outcont_buffer, 64,
 			 cback->outcont_callback);
-	}	
-
+	}
 }
 
 /* usa19 function doesn't require prescaler */
@@ -1629,46 +1648,39 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
 				   u8 *rate_low, u8 *prescaler, int portnum)
 {
 	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
-		div,	/* divisor */	
+		div,	/* divisor */
 		cnt;	/* inverse of divisor (programmed into 8051) */
-		
-	dbg ("%s - %d.", __func__, baud_rate);
 
-		/* prevent divide by zero...  */
-	if( (b16 = (baud_rate * 16L)) == 0) {
-		return (KEYSPAN_INVALID_BAUD_RATE);
-	}
-
-		/* Any "standard" rate over 57k6 is marginal on the USA-19
-		   as we run out of divisor resolution. */
-	if (baud_rate > 57600) {
-		return (KEYSPAN_INVALID_BAUD_RATE);
-	}
-
-		/* calculate the divisor and the counter (its inverse) */
-	if( (div = (baudclk / b16)) == 0) {
-		return (KEYSPAN_INVALID_BAUD_RATE);
-	}
-	else {
+	dbg("%s - %d.", __func__, baud_rate);
+
+	/* prevent divide by zero...  */
+	b16 = baud_rate * 16L;
+	if (b16 == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+	/* Any "standard" rate over 57k6 is marginal on the USA-19
+	   as we run out of divisor resolution. */
+	if (baud_rate > 57600)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	/* calculate the divisor and the counter (its inverse) */
+	div = baudclk / b16;
+	if (div == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+	else
 		cnt = 0 - div;
-	}
 
-	if(div > 0xffff) {
-		return (KEYSPAN_INVALID_BAUD_RATE);
-	}
+	if (div > 0xffff)
+		return KEYSPAN_INVALID_BAUD_RATE;
 
-		/* return the counter values if non-null */
-	if (rate_low) {
+	/* return the counter values if non-null */
+	if (rate_low)
 		*rate_low = (u8) (cnt & 0xff);
-	}
-	if (rate_hi) {
+	if (rate_hi)
 		*rate_hi = (u8) ((cnt >> 8) & 0xff);
-	}
-	if (rate_low && rate_hi) {
-		dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low);
-	}
-	
-	return (KEYSPAN_BAUD_RATE_OK);
+	if (rate_low && rate_hi)
+		dbg("%s - %d %02x %02x.",
+				__func__, baud_rate, *rate_hi, *rate_low);
+	return KEYSPAN_BAUD_RATE_OK;
 }
 
 /* usa19hs function doesn't require prescaler */
@@ -1676,34 +1688,35 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
 				   u8 *rate_low, u8 *prescaler, int portnum)
 {
 	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
-			div;	/* divisor */	
-		
-	dbg ("%s - %d.", __func__, baud_rate);
+			div;	/* divisor */
 
-		/* prevent divide by zero...  */
-	if( (b16 = (baud_rate * 16L)) == 0) 
-		return (KEYSPAN_INVALID_BAUD_RATE);
-	
+	dbg("%s - %d.", __func__, baud_rate);
 
+	/* prevent divide by zero...  */
+	b16 = baud_rate * 16L;
+	if (b16 == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
 
-		/* calculate the divisor */
-	if( (div = (baudclk / b16)) == 0) 
-		return (KEYSPAN_INVALID_BAUD_RATE);
+	/* calculate the divisor */
+	div = baudclk / b16;
+	if (div == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
 
-	if(div > 0xffff) 
-		return (KEYSPAN_INVALID_BAUD_RATE);
+	if (div > 0xffff)
+		return KEYSPAN_INVALID_BAUD_RATE;
 
-		/* return the counter values if non-null */
-	if (rate_low) 
+	/* return the counter values if non-null */
+	if (rate_low)
 		*rate_low = (u8) (div & 0xff);
-	
-	if (rate_hi) 
+
+	if (rate_hi)
 		*rate_hi = (u8) ((div >> 8) & 0xff);
-	
-	if (rate_low && rate_hi) 
-		dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low);
-	
-	return (KEYSPAN_BAUD_RATE_OK);
+
+	if (rate_low && rate_hi)
+		dbg("%s - %d %02x %02x.",
+			__func__, baud_rate, *rate_hi, *rate_low);
+
+	return KEYSPAN_BAUD_RATE_OK;
 }
 
 static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
@@ -1711,64 +1724,61 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
 {
 	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
 		clk,	/* clock with 13/8 prescaler */
-		div,	/* divisor using 13/8 prescaler */	
+		div,	/* divisor using 13/8 prescaler */
 		res,	/* resulting baud rate using 13/8 prescaler */
 		diff,	/* error using 13/8 prescaler */
 		smallest_diff;
 	u8	best_prescaler;
 	int	i;
 
-	dbg ("%s - %d.", __func__, baud_rate);
+	dbg("%s - %d.", __func__, baud_rate);
 
-		/* prevent divide by zero */
-	if( (b16 = baud_rate * 16L) == 0) {
-		return (KEYSPAN_INVALID_BAUD_RATE);
-	}
+	/* prevent divide by zero */
+	b16 = baud_rate * 16L;
+	if (b16 == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
 
-		/* Calculate prescaler by trying them all and looking
-		   for best fit */
-		
-		/* start with largest possible difference */
+	/* Calculate prescaler by trying them all and looking
+	   for best fit */
+
+	/* start with largest possible difference */
 	smallest_diff = 0xffffffff;
 
 		/* 0 is an invalid prescaler, used as a flag */
 	best_prescaler = 0;
 
-	for(i = 8; i <= 0xff; ++i) {
+	for (i = 8; i <= 0xff; ++i) {
 		clk = (baudclk * 8) / (u32) i;
-		
-		if( (div = clk / b16) == 0) {
+
+		div = clk / b16;
+		if (div == 0)
 			continue;
-		}
 
 		res = clk / div;
-		diff= (res > b16) ? (res-b16) : (b16-res);
+		diff = (res > b16) ? (res-b16) : (b16-res);
 
-		if(diff < smallest_diff) {
+		if (diff < smallest_diff) {
 			best_prescaler = i;
 			smallest_diff = diff;
 		}
 	}
 
-	if(best_prescaler == 0) {
-		return (KEYSPAN_INVALID_BAUD_RATE);
-	}
+	if (best_prescaler == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
 
 	clk = (baudclk * 8) / (u32) best_prescaler;
 	div = clk / b16;
 
-		/* return the divisor and prescaler if non-null */
-	if (rate_low) {
+	/* return the divisor and prescaler if non-null */
+	if (rate_low)
 		*rate_low = (u8) (div & 0xff);
-	}
-	if (rate_hi) {
+	if (rate_hi)
 		*rate_hi = (u8) ((div >> 8) & 0xff);
-	}
 	if (prescaler) {
 		*prescaler = best_prescaler;
 		/*  dbg("%s - %d %d", __func__, *prescaler, div); */
 	}
-	return (KEYSPAN_BAUD_RATE_OK);
+	return KEYSPAN_BAUD_RATE_OK;
 }
 
 	/* USA-28 supports different maximum baud rates on each port */
@@ -1776,57 +1786,51 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
 				    u8 *rate_low, u8 *prescaler, int portnum)
 {
 	u32 	b16,	/* baud rate times 16 (actual rate used internally) */
-		div,	/* divisor */	
+		div,	/* divisor */
 		cnt;	/* inverse of divisor (programmed into 8051) */
 
-	dbg ("%s - %d.", __func__, baud_rate);
+	dbg("%s - %d.", __func__, baud_rate);
 
 		/* prevent divide by zero */
-	if ((b16 = baud_rate * 16L) == 0)
-		return (KEYSPAN_INVALID_BAUD_RATE);
-
-		/* calculate the divisor and the counter (its inverse) */
-	if ((div = (KEYSPAN_USA28_BAUDCLK / b16)) == 0) {
-		return (KEYSPAN_INVALID_BAUD_RATE);
-	}
-	else {
+	b16 = baud_rate * 16L;
+	if (b16 == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+
+	/* calculate the divisor and the counter (its inverse) */
+	div = KEYSPAN_USA28_BAUDCLK / b16;
+	if (div == 0)
+		return KEYSPAN_INVALID_BAUD_RATE;
+	else
 		cnt = 0 - div;
-	}
 
-		/* check for out of range, based on portnum, 
-		   and return result */
-	if(portnum == 0) {
-		if(div > 0xffff)
-			return (KEYSPAN_INVALID_BAUD_RATE);
-	}
-	else {
-		if(portnum == 1) {
-			if(div > 0xff) {
-				return (KEYSPAN_INVALID_BAUD_RATE);
-			}
-		}
-		else {
-			return (KEYSPAN_INVALID_BAUD_RATE);
-		}
+	/* check for out of range, based on portnum,
+	   and return result */
+	if (portnum == 0) {
+		if (div > 0xffff)
+			return KEYSPAN_INVALID_BAUD_RATE;
+	} else {
+		if (portnum == 1) {
+			if (div > 0xff)
+				return KEYSPAN_INVALID_BAUD_RATE;
+		} else
+			return KEYSPAN_INVALID_BAUD_RATE;
 	}
 
 		/* return the counter values if not NULL
 		   (port 1 will ignore retHi) */
-	if (rate_low) {
+	if (rate_low)
 		*rate_low = (u8) (cnt & 0xff);
-	}
-	if (rate_hi) {
+	if (rate_hi)
 		*rate_hi = (u8) ((cnt >> 8) & 0xff);
-	}
-	dbg ("%s - %d OK.", __func__, baud_rate);
-	return (KEYSPAN_BAUD_RATE_OK);
+	dbg("%s - %d OK.", __func__, baud_rate);
+	return KEYSPAN_BAUD_RATE_OK;
 }
 
 static int keyspan_usa26_send_setup(struct usb_serial *serial,
 				    struct usb_serial_port *port,
 				    int reset_port)
 {
-	struct keyspan_usa26_portControlMessage	msg;		
+	struct keyspan_usa26_portControlMessage	msg;
 	struct keyspan_serial_private 		*s_priv;
 	struct keyspan_port_private 		*p_priv;
 	const struct keyspan_device_details	*d_details;
@@ -1834,7 +1838,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	struct urb				*this_urb;
 	int 					device_port, err;
 
-	dbg ("%s reset=%d", __func__, reset_port);
+	dbg("%s reset=%d", __func__, reset_port);
 
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
@@ -1857,22 +1861,22 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	if ((reset_port + 1) > p_priv->resend_cont)
 		p_priv->resend_cont = reset_port + 1;
 	if (this_urb->status == -EINPROGRESS) {
-		/*  dbg ("%s - already writing", __func__); */
+		/*  dbg("%s - already writing", __func__); */
 		mdelay(5);
-		return(-1);
+		return -1;
 	}
 
-	memset(&msg, 0, sizeof (struct keyspan_usa26_portControlMessage));
-	
-		/* Only set baud rate if it's changed */	
+	memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage));
+
+	/* Only set baud rate if it's changed */
 	if (p_priv->old_baud != p_priv->baud) {
 		p_priv->old_baud = p_priv->baud;
 		msg.setClocking = 0xff;
 		if (d_details->calculate_baud_rate
 		    (p_priv->baud, d_details->baudclk, &msg.baudHi,
-		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
-			dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
-			    p_priv->baud);
+		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+			dbg("%s - Invalid baud rate %d requested, using 9600.",
+						__func__, p_priv->baud);
 			msg.baudLo = 0;
 			msg.baudHi = 125;	/* Values for 9600 baud */
 			msg.prescaler = 10;
@@ -1898,7 +1902,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	if (p_priv->cflag & PARENB) {
 		/* note USA_PARITY_NONE == 0 */
 		msg.lcr |= (p_priv->cflag & PARODD)?
-			USA_PARITY_ODD: USA_PARITY_EVEN;
+			USA_PARITY_ODD : USA_PARITY_EVEN;
 	}
 	msg.setLcr = 0xff;
 
@@ -1939,7 +1943,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 
 	/* Sending intermediate configs */
 	else {
-		msg._txOn = (! p_priv->break_on);
+		msg._txOn = (!p_priv->break_on);
 		msg._txOff = 0;
 		msg.txFlush = 0;
 		msg.txBreak = (p_priv->break_on);
@@ -1951,23 +1955,23 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 		msg.resetDataToggle = 0x0;
 	}
 
-		/* Do handshaking outputs */	
+	/* Do handshaking outputs */
 	msg.setTxTriState_setRts = 0xff;
 	msg.txTriState_rts = p_priv->rts_state;
 
 	msg.setHskoa_setDtr = 0xff;
 	msg.hskoa_dtr = p_priv->dtr_state;
-		
+
 	p_priv->resend_cont = 0;
-	memcpy (this_urb->transfer_buffer, &msg, sizeof(msg));
-	
+	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
 	/* send the data out the device on control endpoint */
 	this_urb->transfer_buffer_length = sizeof(msg);
 
 	this_urb->dev = serial->dev;
-	if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
 		dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
-	}
 #if 0
 	else {
 		dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__
@@ -1983,14 +1987,14 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 				    struct usb_serial_port *port,
 				    int reset_port)
 {
-	struct keyspan_usa28_portControlMessage	msg;		
+	struct keyspan_usa28_portControlMessage	msg;
 	struct keyspan_serial_private	 	*s_priv;
 	struct keyspan_port_private 		*p_priv;
 	const struct keyspan_device_details	*d_details;
 	struct urb				*this_urb;
 	int 					device_port, err;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
@@ -1998,7 +2002,8 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 	device_port = port->number - port->serial->minor;
 
 	/* only do something if we have a bulk out endpoint */
-	if ((this_urb = p_priv->outcont_urb) == NULL) {
+	this_urb = p_priv->outcont_urb;
+	if (this_urb == NULL) {
 		dbg("%s - oops no urb.", __func__);
 		return -1;
 	}
@@ -2008,17 +2013,18 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 	if ((reset_port + 1) > p_priv->resend_cont)
 		p_priv->resend_cont = reset_port + 1;
 	if (this_urb->status == -EINPROGRESS) {
-		dbg ("%s already writing", __func__);
+		dbg("%s already writing", __func__);
 		mdelay(5);
-		return(-1);
+		return -1;
 	}
 
-	memset(&msg, 0, sizeof (struct keyspan_usa28_portControlMessage));
+	memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage));
 
 	msg.setBaudRate = 1;
 	if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
-		&msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
-		dbg("%s - Invalid baud rate requested %d.", __func__, p_priv->baud);
+		&msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+		dbg("%s - Invalid baud rate requested %d.",
+						__func__, p_priv->baud);
 		msg.baudLo = 0xff;
 		msg.baudHi = 0xb2;	/* Values for 9600 baud */
 	}
@@ -2029,7 +2035,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
 	msg.xonFlowControl = 0;
 
-	/* Do handshaking outputs, DTR is inverted relative to RTS */	
+	/* Do handshaking outputs, DTR is inverted relative to RTS */
 	msg.rts = p_priv->rts_state;
 	msg.dtr = p_priv->dtr_state;
 
@@ -2071,7 +2077,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 	}
 	/* Sending intermediate configs */
 	else {
-		msg._txOn = (! p_priv->break_on);
+		msg._txOn = (!p_priv->break_on);
 		msg._txOff = 0;
 		msg.txFlush = 0;
 		msg.txForceXoff = 0;
@@ -2085,15 +2091,15 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 	}
 
 	p_priv->resend_cont = 0;
-	memcpy (this_urb->transfer_buffer, &msg, sizeof(msg));
+	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
 
 	/* send the data out the device on control endpoint */
 	this_urb->transfer_buffer_length = sizeof(msg);
 
 	this_urb->dev = serial->dev;
-	if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
 		dbg("%s - usb_submit_urb(setup) failed", __func__);
-	}
 #if 0
 	else {
 		dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__,
@@ -2116,7 +2122,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	struct urb				*this_urb;
 	int 					err, device_port;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
@@ -2127,7 +2133,9 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	/* Work out which port within the device is being setup */
 	device_port = port->number - port->serial->minor;
 
-	dbg("%s - endpoint %d port %d (%d)",__func__, usb_pipeendpoint(this_urb->pipe), port->number, device_port);
+	dbg("%s - endpoint %d port %d (%d)",
+			__func__, usb_pipeendpoint(this_urb->pipe),
+			port->number, device_port);
 
 		/* Make sure we have an urb then send the message */
 	if (this_urb == NULL) {
@@ -2141,30 +2149,30 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 		p_priv->resend_cont = reset_port + 1;
 
 	if (this_urb->status == -EINPROGRESS) {
-		/*  dbg ("%s - already writing", __func__); */
+		/*  dbg("%s - already writing", __func__); */
 		mdelay(5);
-		return(-1);
+		return -1;
 	}
 
-	memset(&msg, 0, sizeof (struct keyspan_usa49_portControlMessage));
+	memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage));
 
 	/*msg.portNumber = port->number;*/
 	msg.portNumber = device_port;
-	
-		/* Only set baud rate if it's changed */	
+
+	/* Only set baud rate if it's changed */
 	if (p_priv->old_baud != p_priv->baud) {
 		p_priv->old_baud = p_priv->baud;
 		msg.setClocking = 0xff;
 		if (d_details->calculate_baud_rate
 		    (p_priv->baud, d_details->baudclk, &msg.baudHi,
-		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
-			dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
-			    p_priv->baud);
+		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+			dbg("%s - Invalid baud rate %d requested, using 9600.",
+						__func__, p_priv->baud);
 			msg.baudLo = 0;
 			msg.baudHi = 125;	/* Values for 9600 baud */
 			msg.prescaler = 10;
 		}
-		//msg.setPrescaler = 0xff;
+		/* msg.setPrescaler = 0xff; */
 	}
 
 	msg.lcr = (p_priv->cflag & CSTOPB)? STOPBITS_678_2: STOPBITS_5678_1;
@@ -2185,19 +2193,19 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	if (p_priv->cflag & PARENB) {
 		/* note USA_PARITY_NONE == 0 */
 		msg.lcr |= (p_priv->cflag & PARODD)?
-			USA_PARITY_ODD: USA_PARITY_EVEN;
+			USA_PARITY_ODD : USA_PARITY_EVEN;
 	}
 	msg.setLcr = 0xff;
 
 	msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
 	msg.xonFlowControl = 0;
 	msg.setFlowControl = 0xff;
-	
+
 	msg.forwardingLength = 16;
 	msg.xonChar = 17;
 	msg.xoffChar = 19;
 
-	/* Opening port */ 
+	/* Opening port */
 	if (reset_port == 1) {
 		msg._txOn = 1;
 		msg._txOff = 0;
@@ -2229,7 +2237,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	}
 	/* Sending intermediate configs */
 	else {
-		msg._txOn = (! p_priv->break_on);
+		msg._txOn = (!p_priv->break_on);
 		msg._txOff = 0;
 		msg.txFlush = 0;
 		msg.txBreak = (p_priv->break_on);
@@ -2243,16 +2251,17 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 		msg.disablePort = 0;
 	}
 
-		/* Do handshaking outputs */	
+	/* Do handshaking outputs */
 	msg.setRts = 0xff;
 	msg.rts = p_priv->rts_state;
 
 	msg.setDtr = 0xff;
 	msg.dtr = p_priv->dtr_state;
-		
+
 	p_priv->resend_cont = 0;
 
-	/* if the device is a 49wg, we send control message on usb control EP 0 */
+	/* if the device is a 49wg, we send control message on usb
+	   control EP 0 */
 
 	if (d_details->product_id == keyspan_usa49wg_product_id) {
 		dr = (void *)(s_priv->ctrl_buf);
@@ -2262,23 +2271,24 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 		dr->wIndex = 0;
 		dr->wLength = cpu_to_le16(sizeof(msg));
 
-		memcpy (s_priv->glocont_buf, &msg, sizeof(msg));
+		memcpy(s_priv->glocont_buf, &msg, sizeof(msg));
 
-		usb_fill_control_urb(this_urb, serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			     (unsigned char *)dr, s_priv->glocont_buf, sizeof(msg),
-			     usa49_glocont_callback, serial);
+		usb_fill_control_urb(this_urb, serial->dev,
+				usb_sndctrlpipe(serial->dev, 0),
+				(unsigned char *)dr, s_priv->glocont_buf,
+				sizeof(msg), usa49_glocont_callback, serial);
 
 	} else {
 		memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
-	
+
 		/* send the data out the device on control endpoint */
 		this_urb->transfer_buffer_length = sizeof(msg);
 
 		this_urb->dev = serial->dev;
 	}
-	if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
 		dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
-	}
 #if 0
 	else {
 		dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__,
@@ -2294,7 +2304,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 				    struct usb_serial_port *port,
 				    int reset_port)
 {
-	struct keyspan_usa90_portControlMessage	msg;		
+	struct keyspan_usa90_portControlMessage	msg;
 	struct keyspan_serial_private 		*s_priv;
 	struct keyspan_port_private 		*p_priv;
 	const struct keyspan_device_details	*d_details;
@@ -2302,14 +2312,15 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 	int 					err;
 	u8						prescaler;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
 	d_details = s_priv->device_details;
 
 	/* only do something if we have a bulk out endpoint */
-	if ((this_urb = p_priv->outcont_urb) == NULL) {
+	this_urb = p_priv->outcont_urb;
+	if (this_urb == NULL) {
 		dbg("%s - oops no urb.", __func__);
 		return -1;
 	}
@@ -2319,24 +2330,24 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 	if ((reset_port + 1) > p_priv->resend_cont)
 		p_priv->resend_cont = reset_port + 1;
 	if (this_urb->status == -EINPROGRESS) {
-		dbg ("%s already writing", __func__);
+		dbg("%s already writing", __func__);
 		mdelay(5);
-		return(-1);
+		return -1;
 	}
 
-	memset(&msg, 0, sizeof (struct keyspan_usa90_portControlMessage));
+	memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage));
 
-	/* Only set baud rate if it's changed */	
+	/* Only set baud rate if it's changed */
 	if (p_priv->old_baud != p_priv->baud) {
 		p_priv->old_baud = p_priv->baud;
 		msg.setClocking = 0x01;
 		if (d_details->calculate_baud_rate
 		    (p_priv->baud, d_details->baudclk, &msg.baudHi,
-		     &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE ) {
-			dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
-			    p_priv->baud);
+		     &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) {
+			dbg("%s - Invalid baud rate %d requested, using 9600.",
+						__func__, p_priv->baud);
 			p_priv->baud = 9600;
-			d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, 
+			d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
 				&msg.baudHi, &msg.baudLo, &prescaler, 0);
 		}
 		msg.setRxMode = 1;
@@ -2344,13 +2355,10 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 	}
 
 	/* modes must always be correctly specified */
-	if (p_priv->baud > 57600)
-	{
+	if (p_priv->baud > 57600) {
 		msg.rxMode = RXMODE_DMA;
 		msg.txMode = TXMODE_DMA;
-	}
-	else
-	{
+	} else {
 		msg.rxMode = RXMODE_BYHAND;
 		msg.txMode = TXMODE_BYHAND;
 	}
@@ -2373,7 +2381,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 	if (p_priv->cflag & PARENB) {
 		/* note USA_PARITY_NONE == 0 */
 		msg.lcr |= (p_priv->cflag & PARODD)?
-			USA_PARITY_ODD: USA_PARITY_EVEN;
+			USA_PARITY_ODD : USA_PARITY_EVEN;
 	}
 	if (p_priv->old_cflag != p_priv->cflag) {
 		p_priv->old_cflag = p_priv->cflag;
@@ -2384,23 +2392,22 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 		msg.txFlowControl = TXFLOW_CTS;
 	msg.setTxFlowControl = 0x01;
 	msg.setRxFlowControl = 0x01;
-	
+
 	msg.rxForwardingLength = 16;
-	msg.rxForwardingTimeout = 16;	
+	msg.rxForwardingTimeout = 16;
 	msg.txAckSetting = 0;
 	msg.xonChar = 17;
 	msg.xoffChar = 19;
 
-	/* Opening port */ 
+	/* Opening port */
 	if (reset_port == 1) {
 		msg.portEnabled = 1;
 		msg.rxFlush = 1;
 		msg.txBreak = (p_priv->break_on);
 	}
 	/* Closing port */
-	else if (reset_port == 2) {
+	else if (reset_port == 2)
 		msg.portEnabled = 0;
-	}
 	/* Sending intermediate configs */
 	else {
 		if (port->port.count)
@@ -2408,23 +2415,23 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 		msg.txBreak = (p_priv->break_on);
 	}
 
-	/* Do handshaking outputs */	
+	/* Do handshaking outputs */
 	msg.setRts = 0x01;
 	msg.rts = p_priv->rts_state;
 
 	msg.setDtr = 0x01;
 	msg.dtr = p_priv->dtr_state;
-		
+
 	p_priv->resend_cont = 0;
-	memcpy (this_urb->transfer_buffer, &msg, sizeof(msg));
-	
+	memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
 	/* send the data out the device on control endpoint */
 	this_urb->transfer_buffer_length = sizeof(msg);
 
 	this_urb->dev = serial->dev;
-	if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
+	err = usb_submit_urb(this_urb, GFP_ATOMIC);
+	if (err != 0)
 		dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
-	}
 	return 0;
 }
 
@@ -2439,7 +2446,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
 	struct urb				*this_urb;
 	int 					err, device_port;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
@@ -2462,9 +2469,9 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
 	if ((reset_port + 1) > p_priv->resend_cont)
 		p_priv->resend_cont = reset_port + 1;
 	if (this_urb->status == -EINPROGRESS) {
-		/*  dbg ("%s - already writing", __func__); */
+		/*  dbg("%s - already writing", __func__); */
 		mdelay(5);
-		return(-1);
+		return -1;
 	}
 
 	memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));
@@ -2477,9 +2484,9 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
 		msg.setClocking = 0xff;
 		if (d_details->calculate_baud_rate
 		    (p_priv->baud, d_details->baudclk, &msg.baudHi,
-		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
-			dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
-			    p_priv->baud);
+		     &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+			dbg("%s - Invalid baud rate %d requested, using 9600.",
+						__func__, p_priv->baud);
 			msg.baudLo = 0;
 			msg.baudHi = 125;	/* Values for 9600 baud */
 			msg.prescaler = 10;
@@ -2505,7 +2512,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
 	if (p_priv->cflag & PARENB) {
 		/* note USA_PARITY_NONE == 0 */
 		msg.lcr |= (p_priv->cflag & PARODD)?
-			USA_PARITY_ODD: USA_PARITY_EVEN;
+					USA_PARITY_ODD : USA_PARITY_EVEN;
 	}
 	msg.setLcr = 0xff;
 
@@ -2542,7 +2549,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
 		msg.resetDataToggle = 0;
 	} else {
 		/* Sending intermediate configs */
-		msg._txOn = (! p_priv->break_on);
+		msg._txOn = (!p_priv->break_on);
 		msg._txOff = 0;
 		msg.txFlush = 0;
 		msg.txBreak = (p_priv->break_on);
@@ -2582,7 +2589,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
 	struct keyspan_serial_private *s_priv;
 	const struct keyspan_device_details *d_details;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	s_priv = usb_get_serial_data(serial);
 	d_details = s_priv->device_details;
@@ -2609,7 +2616,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
 
 /* Gets called by the "real" driver (ie once firmware is loaded
    and renumeration has taken place. */
-static int keyspan_startup (struct usb_serial *serial)
+static int keyspan_startup(struct usb_serial *serial)
 {
 	int				i, err;
 	struct usb_serial_port		*port;
@@ -2620,17 +2627,20 @@ static int keyspan_startup (struct usb_serial *serial)
 	dbg("%s", __func__);
 
 	for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
-		if (d_details->product_id == le16_to_cpu(serial->dev->descriptor.idProduct))
+		if (d_details->product_id ==
+				le16_to_cpu(serial->dev->descriptor.idProduct))
 			break;
 	if (d_details == NULL) {
-		dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
+		dev_err(&serial->dev->dev, "%s - unknown product id %x\n",
+		    __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
 		return 1;
 	}
 
 	/* Setup private data for serial driver */
 	s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
 	if (!s_priv) {
-		dbg("%s - kmalloc for keyspan_serial_private failed.", __func__);
+		dbg("%s - kmalloc for keyspan_serial_private failed.",
+								__func__);
 		return -ENOMEM;
 	}
 
@@ -2640,10 +2650,11 @@ static int keyspan_startup (struct usb_serial *serial)
 	/* Now setup per port private data */
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
-		p_priv = kzalloc(sizeof(struct keyspan_port_private), GFP_KERNEL);
+		p_priv = kzalloc(sizeof(struct keyspan_port_private),
+								GFP_KERNEL);
 		if (!p_priv) {
 			dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i);
-			return (1);
+			return 1;
 		}
 		p_priv->device_details = d_details;
 		usb_set_serial_port_data(port, p_priv);
@@ -2665,11 +2676,11 @@ static int keyspan_startup (struct usb_serial *serial)
 			dbg("%s - submit indat urb failed %d", __func__,
 				err);
 	}
-			
+
 	return 0;
 }
 
-static void keyspan_shutdown (struct usb_serial *serial)
+static void keyspan_shutdown(struct usb_serial *serial)
 {
 	int				i, j;
 	struct usb_serial_port		*port;
@@ -2721,8 +2732,8 @@ static void keyspan_shutdown (struct usb_serial *serial)
 	}
 }
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 MODULE_FIRMWARE("keyspan/usa28.fw");
-- 
cgit v1.2.3


From f035a8ad158f0bdc94125004488b0ea8438edaa9 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:13:32 +0100
Subject: keyspan: Use string flip functions when possible

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/keyspan.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 2b1cfcbf8f9..704716f6f6d 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -577,7 +577,7 @@ static void	usa26_glocont_callback(struct urb *urb)
 
 static void usa28_indat_callback(struct urb *urb)
 {
-	int                     i, err;
+	int                     err;
 	struct usb_serial_port  *port;
 	struct tty_struct       *tty;
 	unsigned char           *data;
@@ -606,8 +606,7 @@ static void usa28_indat_callback(struct urb *urb)
 
 		tty = port->port.tty;
 		if (urb->actual_length) {
-			for (i = 0; i < urb->actual_length ; ++i)
-				tty_insert_flip_char(tty, data[i], 0);
+			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
 		}
 
@@ -833,8 +832,8 @@ static void	usa49_indat_callback(struct urb *urb)
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
 			/* no error on any byte */
-			for (i = 1; i < urb->actual_length ; ++i)
-				tty_insert_flip_char(tty, data[i], 0);
+			tty_insert_flip_string(tty, data + 1,
+						urb->actual_length - 1);
 		} else {
 			/* some bytes had errors, every byte has status */
 			for (i = 0; i + 1 < urb->actual_length; i += 2) {
@@ -973,10 +972,9 @@ static void usa90_indat_callback(struct urb *urb)
 		/* if current mode is DMA, looks like usa28 format
 		   otherwise looks like usa26 data format */
 
-		if (p_priv->baud > 57600) {
-			for (i = 0; i < urb->actual_length ; ++i)
-				tty_insert_flip_char(tty, data[i], 0);
-		} else {
+		if (p_priv->baud > 57600)
+			tty_insert_flip_string(tty, data, urb->actual_length);
+		else {
 			/* 0x80 bit is error flag */
 			if ((data[0] & 0x80) == 0) {
 				/* no errors on individual bytes, only
-- 
cgit v1.2.3


From 9e70f319d14ac4dd077de7fc835a391ece804500 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:13:42 +0100
Subject: tty-usb-keyspan-pda: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/keyspan_pda.c | 161 ++++++++++++++++++++++-----------------
 1 file changed, 91 insertions(+), 70 deletions(-)

diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 24a08ac2e4e..b60012ce4c9 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -10,8 +10,9 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- * 
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
+ *
  * (09/07/2001) gkh
  *	cleaned up the Xircom support.  Added ids for Entregra device which is
  *	the same as the Xircom device.  Enabled the code to be compiled for
@@ -21,23 +22,24 @@
  *	support for Xircom PGSDB9
  *
  * (05/31/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of problems.
+ *	switched from using spinlock to a semaphore, which fixes lots of
+ *	problems.
  *
  * (04/08/2001) gb
  *	Identify version on module load.
- * 
+ *
  * (11/01/2000) Adam J. Richter
  *	usb_device_id table support
- * 
+ *
  * (10/05/2000) gkh
  *	Fixed bug with urb->dev not being set properly, now that the usb
  *	core needs it.
- * 
+ *
  * (08/28/2000) gkh
  *	Added locks for SMP safeness.
- *	Fixed MOD_INC and MOD_DEC logic and the ability to open a port more 
+ *	Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
  *	than once.
- * 
+ *
  * (07/20/2000) borchers
  *	- keyspan_pda_write no longer sleeps if it is called on interrupt time;
  *	  PPP and the line discipline with stty echo on can call write on
@@ -55,14 +57,14 @@
  *	  than done directly from the callback to avoid the race in write_chan
  *	- keyspan_pda_chars_in_buffer also indicates its buffer is full if the
  *	  urb status is -EINPROGRESS, meaning it cannot write at the moment
- *      
+ *
  * (07/19/2000) gkh
  *	Added module_init and module_exit functions to handle the fact that this
  *	driver is a loadable module now.
  *
  * (03/26/2000) gkh
  *	Split driver up into device specific pieces.
- * 
+ *
  */
 
 
@@ -78,7 +80,7 @@
 #include <linux/workqueue.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -135,7 +137,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ }						/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver keyspan_pda_driver = {
 	.name =		"keyspan_pda",
@@ -159,9 +161,9 @@ static struct usb_device_id id_table_fake [] = {
 
 #ifdef XIRCOM
 static struct usb_device_id id_table_fake_xircom [] = {
-        { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
-        { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
-        { }                                             
+	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
+	{ USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
+	{ }
 };
 #endif
 
@@ -184,7 +186,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
 	dbg(" request_unthrottle");
 	/* ask the device to tell us when the tx buffer becomes
 	   sufficiently empty */
-	result = usb_control_msg(serial->dev, 
+	result = usb_control_msg(serial->dev,
 				 usb_sndctrlpipe(serial->dev, 0),
 				 7, /* request_unthrottle */
 				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
@@ -195,15 +197,15 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
 				 0,
 				 2000);
 	if (result < 0)
-		dbg("%s - error %d from usb_control_msg", 
+		dbg("%s - error %d from usb_control_msg",
 		    __func__, result);
 }
 
 
-static void keyspan_pda_rx_interrupt (struct urb *urb)
+static void keyspan_pda_rx_interrupt(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-       	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty = port->port.tty;
 	unsigned char *data = urb->transfer_buffer;
 	int i;
 	int retval;
@@ -228,14 +230,13 @@ static void keyspan_pda_rx_interrupt (struct urb *urb)
 		goto exit;
 	}
 
- 	/* see if the message is data or a status interrupt */
+	/* see if the message is data or a status interrupt */
 	switch (data[0]) {
 	case 0:
 		/* rest of message is rx data */
 		if (urb->actual_length) {
-			for (i = 1; i < urb->actual_length ; ++i) {
+			for (i = 1; i < urb->actual_length ; ++i)
 				tty_insert_flip_char(tty, data[i], 0);
-			}
 			tty_flip_buffer_push(tty);
 		}
 		break;
@@ -259,9 +260,9 @@ static void keyspan_pda_rx_interrupt (struct urb *urb)
 	}
 
 exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
+		err("%s - usb_submit_urb failed with result %d",
 		     __func__, retval);
 }
 
@@ -292,32 +293,52 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
 }
 
 
-static speed_t keyspan_pda_setbaud (struct usb_serial *serial, speed_t baud)
+static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
 {
 	int rc;
 	int bindex;
 
-	switch(baud) {
-		case 110: bindex = 0; break;
-		case 300: bindex = 1; break;
-		case 1200: bindex = 2; break;
-		case 2400: bindex = 3; break;
-		case 4800: bindex = 4; break;
-		case 9600: bindex = 5; break;
-		case 19200: bindex = 6; break;
-		case 38400: bindex = 7; break;
-		case 57600: bindex = 8; break;
-		case 115200: bindex = 9; break;
-		default:
-			bindex = 5;	/* Default to 9600 */
-			baud = 9600;
+	switch (baud) {
+	case 110:
+		bindex = 0;
+		break;
+	case 300:
+		bindex = 1;
+		break;
+	case 1200:
+		bindex = 2;
+		break;
+	case 2400:
+		bindex = 3;
+		break;
+	case 4800:
+		bindex = 4;
+		break;
+	case 9600:
+		bindex = 5;
+		break;
+	case 19200:
+		bindex = 6;
+		break;
+	case 38400:
+		bindex = 7;
+		break;
+	case 57600:
+		bindex = 8;
+		break;
+	case 115200:
+		bindex = 9;
+		break;
+	default:
+		bindex = 5;	/* Default to 9600 */
+		baud = 9600;
 	}
 
 	/* rather than figure out how to sleep while waiting for this
 	   to complete, I just use the "legacy" API. */
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			     0, /* set baud */
-			     USB_TYPE_VENDOR 
+			     USB_TYPE_VENDOR
 			     | USB_RECIP_INTERFACE
 			     | USB_DIR_OUT, /* type */
 			     bindex, /* value */
@@ -343,11 +364,11 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
 	else
 		value = 0; /* clear break */
 	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				4, /* set break */
-				USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				value, 0, NULL, 0, 2000);
+			4, /* set break */
+			USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			value, 0, NULL, 0, 2000);
 	if (result < 0)
-		dbg("%s - error %d from usb_control_msg", 
+		dbg("%s - error %d from usb_control_msg",
 		    __func__, result);
 	/* there is something funky about this.. the TCSBRK that 'cu' performs
 	   ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4
@@ -490,10 +511,10 @@ static int keyspan_pda_write(struct tty_struct *tty,
 	   select() or poll() too) until we receive that unthrottle interrupt.
 	   Block if we can't write anything at all, otherwise write as much as
 	   we can. */
-	dbg("keyspan_pda_write(%d)",count);
+	dbg("keyspan_pda_write(%d)", count);
 	if (count == 0) {
 		dbg(" write request of 0 bytes");
-		return (0);
+		return 0;
 	}
 
 	/* we might block because of:
@@ -520,7 +541,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
 	   scheduler time, since usb_control_msg() sleeps. */
 	if (count > priv->tx_room && !in_interrupt()) {
 		unsigned char room;
-		rc = usb_control_msg(serial->dev, 
+		rc = usb_control_msg(serial->dev,
 				     usb_rcvctrlpipe(serial->dev, 0),
 				     6, /* write_room */
 				     USB_TYPE_VENDOR | USB_RECIP_INTERFACE
@@ -551,7 +572,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
 
 	if (count) {
 		/* now transfer data */
-		memcpy (port->write_urb->transfer_buffer, buf, count);
+		memcpy(port->write_urb->transfer_buffer, buf, count);
 		/* send the data out the bulk port */
 		port->write_urb->transfer_buffer_length = count;
 
@@ -563,8 +584,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
 			dbg(" usb_submit_urb(write bulk) failed");
 			goto exit;
 		}
-	}
-	else {
+	} else {
 		/* There wasn't any room left, so we are throttled until
 		   the buffer empties a bit */
 		request_unthrottle = 1;
@@ -583,7 +603,7 @@ exit:
 }
 
 
-static void keyspan_pda_write_bulk_callback (struct urb *urb)
+static void keyspan_pda_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct keyspan_pda_private *priv;
@@ -604,7 +624,7 @@ static int keyspan_pda_write_room(struct tty_struct *tty)
 	/* used by n_tty.c for processing of tabs and such. Giving it our
 	   conservative guess is probably good enough, but needs testing by
 	   running a console through the device. */
-	return (priv->tx_room);
+	return priv->tx_room;
 }
 
 
@@ -662,7 +682,7 @@ static int keyspan_pda_open(struct tty_struct *tty,
 	/* the normal serial device seems to always turn on DTR and RTS here,
 	   so do the same */
 	if (tty && (tty->termios->c_cflag & CBAUD))
-		keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2) );
+		keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2));
 	else
 		keyspan_pda_set_modem_info(serial, 0);
 
@@ -685,7 +705,8 @@ static void keyspan_pda_close(struct tty_struct *tty,
 	struct usb_serial *serial = port->serial;
 
 	if (serial->dev) {
-		/* the normal serial device seems to always shut off DTR and RTS now */
+		/* the normal serial device seems to always shut
+		   off DTR and RTS now */
 		if (tty->termios->c_cflag & HUPCL)
 			keyspan_pda_set_modem_info(serial, 0);
 
@@ -697,7 +718,7 @@ static void keyspan_pda_close(struct tty_struct *tty,
 
 
 /* download the firmware to a "fake" device (pre-renumeration) */
-static int keyspan_pda_fake_startup (struct usb_serial *serial)
+static int keyspan_pda_fake_startup(struct usb_serial *serial)
 {
 	int response;
 	const char *fw_name;
@@ -746,10 +767,10 @@ static int keyspan_pda_fake_startup (struct usb_serial *serial)
 	response = ezusb_set_reset(serial, 0);
 
 	/* we want this device to fail to have a driver assigned to it. */
-	return (1);
+	return 1;
 }
 
-static int keyspan_pda_startup (struct usb_serial *serial)
+static int keyspan_pda_startup(struct usb_serial *serial)
 {
 
 	struct keyspan_pda_private *priv;
@@ -759,20 +780,20 @@ static int keyspan_pda_startup (struct usb_serial *serial)
 
 	priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
 	if (!priv)
-		return (1); /* error */
+		return 1; /* error */
 	usb_set_serial_port_data(serial->port[0], priv);
 	init_waitqueue_head(&serial->port[0]->write_wait);
 	INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
 	INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
 	priv->serial = serial;
 	priv->port = serial->port[0];
-	return (0);
+	return 0;
 }
 
-static void keyspan_pda_shutdown (struct usb_serial *serial)
+static void keyspan_pda_shutdown(struct usb_serial *serial)
 {
 	dbg("%s", __func__);
-	
+
 	kfree(usb_get_serial_port_data(serial->port[0]));
 }
 
@@ -831,7 +852,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 };
 
 
-static int __init keyspan_pda_init (void)
+static int __init keyspan_pda_init(void)
 {
 	int retval;
 	retval = usb_serial_register(&keyspan_pda_device);
@@ -852,7 +873,7 @@ static int __init keyspan_pda_init (void)
 		goto failed_usb_register;
 	info(DRIVER_DESC " " DRIVER_VERSION);
 	return 0;
-failed_usb_register:	
+failed_usb_register:
 #ifdef XIRCOM
 	usb_serial_deregister(&xircom_pgs_fake_device);
 failed_xircom_register:
@@ -869,15 +890,15 @@ failed_pda_register:
 }
 
 
-static void __exit keyspan_pda_exit (void)
+static void __exit keyspan_pda_exit(void)
 {
-	usb_deregister (&keyspan_pda_driver);
-	usb_serial_deregister (&keyspan_pda_device);
+	usb_deregister(&keyspan_pda_driver);
+	usb_serial_deregister(&keyspan_pda_device);
 #ifdef KEYSPAN
-	usb_serial_deregister (&keyspan_pda_fake_device);
+	usb_serial_deregister(&keyspan_pda_fake_device);
 #endif
 #ifdef XIRCOM
-	usb_serial_deregister (&xircom_pgs_fake_device);
+	usb_serial_deregister(&xircom_pgs_fake_device);
 #endif
 }
 
@@ -885,8 +906,8 @@ static void __exit keyspan_pda_exit (void)
 module_init(keyspan_pda_init);
 module_exit(keyspan_pda_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From 8dd03a5b2b775b0932c1705dc19298ccda19167d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:13:51 +0100
Subject: keyspan_pda: Use string flip functions

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/keyspan_pda.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index b60012ce4c9..040040a267d 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -207,7 +207,6 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	struct tty_struct *tty = port->port.tty;
 	unsigned char *data = urb->transfer_buffer;
-	int i;
 	int retval;
 	int status = urb->status;
 	struct keyspan_pda_private *priv;
@@ -235,8 +234,8 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 	case 0:
 		/* rest of message is rx data */
 		if (urb->actual_length) {
-			for (i = 1; i < urb->actual_length ; ++i)
-				tty_insert_flip_char(tty, data[i], 0);
+			tty_insert_flip_string(tty, data + 1,
+						urb->actual_length - 1);
 			tty_flip_buffer_push(tty);
 		}
 		break;
-- 
cgit v1.2.3


From 0c265f4e8598e251108759685dbb3789868086b2 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:14:00 +0100
Subject: tty-usb-kl5kusb105: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/kl5kusb105.c | 389 +++++++++++++++++++---------------------
 1 file changed, 188 insertions(+), 201 deletions(-)

diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 4a38ec8f5fe..b84dddc7112 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -15,12 +15,12 @@
  * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided
  * information that was not already available.
  *
- * It seems that KLSI bought some silicon-design information from ScanLogic, 
+ * It seems that KLSI bought some silicon-design information from ScanLogic,
  * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI.
  * KLSI has firmware available for their devices; it is probable that the
  * firmware differs from that used by KLSI in their products. If you have an
- * original KLSI device and can provide some information on it, I would be 
- * most interested in adding support for it here. If you have any information 
+ * original KLSI device and can provide some information on it, I would be
+ * most interested in adding support for it here. If you have any information
  * on the protocol used (or find errors in my reverse-engineered stuff), please
  * let me know.
  *
@@ -40,7 +40,7 @@
  *   0.2  - TIOCMGET works, so autopilot(1) can be used!
  *   0.1  - can be used to to pilot-xfer -p /dev/ttyUSB0 -l
  *
- *   The driver skeleton is mainly based on mct_u232.c and various other 
+ *   The driver skeleton is mainly based on mct_u232.c and various other
  *   pieces of code shamelessly copied from the drivers/usb/serial/ directory.
  */
 
@@ -53,7 +53,7 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/unaligned.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
@@ -72,37 +72,25 @@ static int debug;
 /*
  * Function prototypes
  */
-static int  klsi_105_startup	         (struct usb_serial *serial);
-static void klsi_105_shutdown	         (struct usb_serial *serial);
-static int  klsi_105_open	         (struct tty_struct *tty,
-					  struct usb_serial_port *port,
-					  struct file *filp);
-static void klsi_105_close	         (struct tty_struct *tty,
-					  struct usb_serial_port *port,
-					  struct file *filp);
-static int  klsi_105_write	         (struct tty_struct *tty,
-					  struct usb_serial_port *port,
-					  const unsigned char *buf,
-					  int count);
-static void klsi_105_write_bulk_callback (struct urb *urb);
-static int  klsi_105_chars_in_buffer     (struct tty_struct *tty);
-static int  klsi_105_write_room          (struct tty_struct *tty);
-
-static void klsi_105_read_bulk_callback  (struct urb *urb);
-static void klsi_105_set_termios         (struct tty_struct *tty,
-					  struct usb_serial_port *port,
-					  struct ktermios *old);
-static void klsi_105_throttle		 (struct tty_struct *tty);
-static void klsi_105_unthrottle		 (struct tty_struct *tty);
-/*
-static void klsi_105_break_ctl	         (struct tty_struct *tty,
-					  int break_state );
- */
-static int  klsi_105_tiocmget	         (struct tty_struct *tty,
-					  struct file *file);
-static int  klsi_105_tiocmset	         (struct tty_struct *tty,
-					  struct file *file, unsigned int set,
-					  unsigned int clear);
+static int  klsi_105_startup(struct usb_serial *serial);
+static void klsi_105_shutdown(struct usb_serial *serial);
+static int  klsi_105_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void klsi_105_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static int  klsi_105_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count);
+static void klsi_105_write_bulk_callback(struct urb *urb);
+static int  klsi_105_chars_in_buffer(struct tty_struct *tty);
+static int  klsi_105_write_room(struct tty_struct *tty);
+static void klsi_105_read_bulk_callback(struct urb *urb);
+static void klsi_105_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static void klsi_105_throttle(struct tty_struct *tty);
+static void klsi_105_unthrottle(struct tty_struct *tty);
+static int  klsi_105_tiocmget(struct tty_struct *tty, struct file *file);
+static int  klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
+			unsigned int set, unsigned int clear);
 
 /*
  * All of the device info needed for the KLSI converters.
@@ -113,7 +101,7 @@ static struct usb_device_id id_table [] = {
 	{ }		/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver kl5kusb105d_driver = {
 	.name =		"kl5kusb105d",
@@ -138,7 +126,7 @@ static struct usb_serial_driver kl5kusb105d_device = {
 	.write_bulk_callback = klsi_105_write_bulk_callback,
 	.chars_in_buffer =   klsi_105_chars_in_buffer,
 	.write_room =        klsi_105_write_room,
-	.read_bulk_callback =klsi_105_read_bulk_callback,
+	.read_bulk_callback = klsi_105_read_bulk_callback,
 	.set_termios =	     klsi_105_set_termios,
 	/*.break_ctl =	     klsi_105_break_ctl,*/
 	.tiocmget =          klsi_105_tiocmget,
@@ -165,7 +153,7 @@ struct klsi_105_private {
 	struct ktermios			termios;
 	unsigned long			line_state; /* modem line settings */
 	/* write pool */
-	struct urb *			write_urb_pool[NUM_URBS];
+	struct urb			*write_urb_pool[NUM_URBS];
 	spinlock_t			lock;
 	unsigned long			bytes_in;
 	unsigned long			bytes_out;
@@ -184,15 +172,15 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 {
 	int rc;
 
-        rc = usb_control_msg(port->serial->dev,
-			     usb_sndctrlpipe(port->serial->dev, 0),
-			     KL5KUSB105A_SIO_SET_DATA,
-                             USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
-			     0, /* value */
-			     0, /* index */
-			     settings,
-			     sizeof(struct klsi_105_port_settings),
-			     KLSI_TIMEOUT);
+	rc = usb_control_msg(port->serial->dev,
+			usb_sndctrlpipe(port->serial->dev, 0),
+			KL5KUSB105A_SIO_SET_DATA,
+			USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
+			0, /* value */
+			0, /* index */
+			settings,
+			sizeof(struct klsi_105_port_settings),
+			KLSI_TIMEOUT);
 	if (rc < 0)
 		err("Change port settings failed (error = %d)", rc);
 	info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d",
@@ -200,7 +188,7 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 	    settings->pktlen,
 	    settings->baudrate, settings->databits,
 	    settings->unknown1, settings->unknown2);
-        return rc;
+	return rc;
 } /* klsi_105_chg_port_settings */
 
 /* translate a 16-bit status value from the device to linux's TIO bits */
@@ -214,9 +202,9 @@ static unsigned long klsi_105_status2linestate(const __u16 status)
 
 	return res;
 }
-/* 
+/*
  * Read line control via vendor command and return result through
- * *line_state_p 
+ * *line_state_p
  */
 /* It seems that the status buffer has always only 2 bytes length */
 #define KLSI_STATUSBUF_LEN	2
@@ -224,14 +212,14 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 				   unsigned long *line_state_p)
 {
 	int rc;
-	__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1};
+	__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1};
 	__u16 status;
 
 	info("%s - sending SIO Poll request", __func__);
-        rc = usb_control_msg(port->serial->dev,
+	rc = usb_control_msg(port->serial->dev,
 			     usb_rcvctrlpipe(port->serial->dev, 0),
 			     KL5KUSB105A_SIO_POLL,
-                             USB_TYPE_VENDOR | USB_DIR_IN,
+			     USB_TYPE_VENDOR | USB_DIR_IN,
 			     0, /* value */
 			     0, /* index */
 			     status_buf, KLSI_STATUSBUF_LEN,
@@ -247,8 +235,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 
 		*line_state_p = klsi_105_status2linestate(status);
 	}
-
-        return rc;
+	return rc;
 }
 
 
@@ -256,7 +243,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
  * Driver's tty interface functions
  */
 
-static int klsi_105_startup (struct usb_serial *serial)
+static int klsi_105_startup(struct usb_serial *serial)
 {
 	struct klsi_105_private *priv;
 	int i, j;
@@ -266,7 +253,7 @@ static int klsi_105_startup (struct usb_serial *serial)
 	 */
 
 	/* allocate the private data structure */
-	for (i=0; i<serial->num_ports; i++) {
+	for (i = 0; i < serial->num_ports; i++) {
 		priv = kmalloc(sizeof(struct klsi_105_private),
 						   GFP_KERNEL);
 		if (!priv) {
@@ -287,9 +274,9 @@ static int klsi_105_startup (struct usb_serial *serial)
 		priv->bytes_out	    = 0;
 		usb_set_serial_port_data(serial->port[i], priv);
 
-		spin_lock_init (&priv->lock);
-		for (j=0; j<NUM_URBS; j++) {
-			struct urb* urb = usb_alloc_urb(0, GFP_KERNEL);
+		spin_lock_init(&priv->lock);
+		for (j = 0; j < NUM_URBS; j++) {
+			struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
 
 			priv->write_urb_pool[j] = urb;
 			if (urb == NULL) {
@@ -297,10 +284,11 @@ static int klsi_105_startup (struct usb_serial *serial)
 				goto err_cleanup;
 			}
 
-			urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE,
-							GFP_KERNEL);
+			urb->transfer_buffer =
+				kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
 			if (!urb->transfer_buffer) {
-				err("%s - out of memory for urb buffers.", __func__);
+				err("%s - out of memory for urb buffers.",
+								__func__);
 				goto err_cleanup;
 			}
 		}
@@ -308,13 +296,13 @@ static int klsi_105_startup (struct usb_serial *serial)
 		/* priv->termios is left uninitalized until port opening */
 		init_waitqueue_head(&serial->port[i]->write_wait);
 	}
-	
+
 	return 0;
 
 err_cleanup:
 	for (; i >= 0; i--) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		for (j=0; j < NUM_URBS; j++) {
+		for (j = 0; j < NUM_URBS; j++) {
 			if (priv->write_urb_pool[j]) {
 				kfree(priv->write_urb_pool[j]->transfer_buffer);
 				usb_free_urb(priv->write_urb_pool[j]);
@@ -326,22 +314,23 @@ err_cleanup:
 } /* klsi_105_startup */
 
 
-static void klsi_105_shutdown (struct usb_serial *serial)
+static void klsi_105_shutdown(struct usb_serial *serial)
 {
 	int i;
-	
+
 	dbg("%s", __func__);
 
 	/* stop reads and writes on all ports */
-	for (i=0; i < serial->num_ports; ++i) {
-		struct klsi_105_private *priv = usb_get_serial_port_data(serial->port[i]);
+	for (i = 0; i < serial->num_ports; ++i) {
+		struct klsi_105_private *priv =
+				usb_get_serial_port_data(serial->port[i]);
 		unsigned long flags;
 
 		if (priv) {
 			/* kill our write urb pool */
 			int j;
 			struct urb **write_urbs = priv->write_urb_pool;
-			spin_lock_irqsave(&priv->lock,flags);
+			spin_lock_irqsave(&priv->lock, flags);
 
 			for (j = 0; j < NUM_URBS; j++) {
 				if (write_urbs[j]) {
@@ -353,12 +342,10 @@ static void klsi_105_shutdown (struct usb_serial *serial)
 					 * oopses. */
 					/* usb_kill_urb(write_urbs[j]); */
 					kfree(write_urbs[j]->transfer_buffer);
-					usb_free_urb (write_urbs[j]);
+					usb_free_urb(write_urbs[j]);
 				}
 			}
-
-			spin_unlock_irqrestore (&priv->lock, flags);
-
+			spin_unlock_irqrestore(&priv->lock, flags);
 			kfree(priv);
 			usb_set_serial_port_data(serial->port[i], NULL);
 		}
@@ -384,7 +371,7 @@ static int  klsi_105_open(struct tty_struct *tty,
 
 	/* Do a defined restart:
 	 * Set up sane default baud rate and send the 'READ_ON'
-	 * vendor command. 
+	 * vendor command.
 	 * FIXME: set modem line control (how?)
 	 * Then read the modem line control and store values in
 	 * priv->line_state.
@@ -395,24 +382,24 @@ static int  klsi_105_open(struct tty_struct *tty,
 	cfg.unknown1 = 0;
 	cfg.unknown2 = 1;
 	klsi_105_chg_port_settings(port, &cfg);
-	
+
 	/* set up termios structure */
-	spin_lock_irqsave (&priv->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 	priv->termios.c_iflag = tty->termios->c_iflag;
 	priv->termios.c_oflag = tty->termios->c_oflag;
 	priv->termios.c_cflag = tty->termios->c_cflag;
 	priv->termios.c_lflag = tty->termios->c_lflag;
-	for (i=0; i<NCCS; i++)
+	for (i = 0; i < NCCS; i++)
 		priv->termios.c_cc[i] = tty->termios->c_cc[i];
 	priv->cfg.pktlen   = cfg.pktlen;
 	priv->cfg.baudrate = cfg.baudrate;
 	priv->cfg.databits = cfg.databits;
 	priv->cfg.unknown1 = cfg.unknown1;
 	priv->cfg.unknown2 = cfg.unknown2;
-	spin_unlock_irqrestore (&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* READ_ON and urb submission */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev, 
+	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 		      usb_rcvbulkpipe(port->serial->dev,
 				      port->bulk_in_endpointAddress),
 		      port->read_urb->transfer_buffer,
@@ -428,7 +415,7 @@ static int  klsi_105_open(struct tty_struct *tty,
 	}
 
 	rc = usb_control_msg(port->serial->dev,
-			     usb_sndctrlpipe(port->serial->dev,0),
+			     usb_sndctrlpipe(port->serial->dev, 0),
 			     KL5KUSB105A_SIO_CONFIGURE,
 			     USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE,
 			     KL5KUSB105A_SIO_CONFIGURE_READ_ON,
@@ -439,14 +426,14 @@ static int  klsi_105_open(struct tty_struct *tty,
 	if (rc < 0) {
 		err("Enabling read failed (error = %d)", rc);
 		retval = rc;
-	} else 
+	} else
 		dbg("%s - enabled reading", __func__);
 
 	rc = klsi_105_get_line_state(port, &line_state);
 	if (rc >= 0) {
-		spin_lock_irqsave (&priv->lock, flags);
+		spin_lock_irqsave(&priv->lock, flags);
 		priv->line_state = line_state;
-		spin_unlock_irqrestore (&priv->lock, flags);
+		spin_unlock_irqrestore(&priv->lock, flags);
 		dbg("%s - read line state 0x%lx", __func__, line_state);
 		retval = 0;
 	} else
@@ -468,14 +455,14 @@ static void klsi_105_close(struct tty_struct *tty,
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected) {
 		/* send READ_OFF */
-		rc = usb_control_msg (port->serial->dev,
-				      usb_sndctrlpipe(port->serial->dev, 0),
-				      KL5KUSB105A_SIO_CONFIGURE,
-				      USB_TYPE_VENDOR | USB_DIR_OUT,
-				      KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
-				      0, /* index */
-				      NULL, 0,
-				      KLSI_TIMEOUT);
+		rc = usb_control_msg(port->serial->dev,
+				     usb_sndctrlpipe(port->serial->dev, 0),
+				     KL5KUSB105A_SIO_CONFIGURE,
+				     USB_TYPE_VENDOR | USB_DIR_OUT,
+				     KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+				     0, /* index */
+				     NULL, 0,
+				     KLSI_TIMEOUT);
 		if (rc < 0)
 			err("Disabling read failed (error = %d)", rc);
 	}
@@ -488,12 +475,13 @@ static void klsi_105_close(struct tty_struct *tty,
 	/* FIXME */
 	/* wgg - do I need this? I think so. */
 	usb_kill_urb(port->interrupt_in_urb);
-	info("kl5kusb105 port stats: %ld bytes in, %ld bytes out", priv->bytes_in, priv->bytes_out);
+	info("kl5kusb105 port stats: %ld bytes in, %ld bytes out",
+					priv->bytes_in, priv->bytes_out);
 } /* klsi_105_close */
 
 
 /* We need to write a complete 64-byte data block and encode the
- * number actually sent in the first double-byte, LSB-order. That 
+ * number actually sent in the first double-byte, LSB-order. That
  * leaves at most 62 bytes of payload.
  */
 #define KLSI_105_DATA_OFFSET	2   /* in the bulk urb data block */
@@ -504,7 +492,7 @@ static int klsi_105_write(struct tty_struct *tty,
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int result, size;
-	int bytes_sent=0;
+	int bytes_sent = 0;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -513,34 +501,37 @@ static int klsi_105_write(struct tty_struct *tty,
 		struct urb *urb = NULL;
 		unsigned long flags;
 		int i;
-		/* since the pool is per-port we might not need the spin lock !? */
-		spin_lock_irqsave (&priv->lock, flags);
-		for (i=0; i<NUM_URBS; i++) {
+		/* since the pool is per-port we might not need
+		   the spin lock !? */
+		spin_lock_irqsave(&priv->lock, flags);
+		for (i = 0; i < NUM_URBS; i++) {
 			if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
 				urb = priv->write_urb_pool[i];
 				dbg("%s - using pool URB %d", __func__, i);
 				break;
 			}
 		}
-		spin_unlock_irqrestore (&priv->lock, flags);
+		spin_unlock_irqrestore(&priv->lock, flags);
 
-		if (urb==NULL) {
+		if (urb == NULL) {
 			dbg("%s - no more free urbs", __func__);
 			goto exit;
 		}
 
 		if (urb->transfer_buffer == NULL) {
-			urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
+			urb->transfer_buffer =
+				kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
 			if (urb->transfer_buffer == NULL) {
 				err("%s - no more kernel memory...", __func__);
 				goto exit;
 			}
 		}
 
-		size = min (count, port->bulk_out_size - KLSI_105_DATA_OFFSET);
-		size = min (size, URB_TRANSFER_BUFFER_SIZE - KLSI_105_DATA_OFFSET);
+		size = min(count, port->bulk_out_size - KLSI_105_DATA_OFFSET);
+		size = min(size, URB_TRANSFER_BUFFER_SIZE -
+							KLSI_105_DATA_OFFSET);
 
-		memcpy (urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size);
+		memcpy(urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size);
 
 		/* write payload size into transfer buffer */
 		((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF);
@@ -558,7 +549,8 @@ static int klsi_105_write(struct tty_struct *tty,
 		/* send the data out the bulk port */
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed submitting write urb, error %d", __func__, result);
+			err("%s - failed submitting write urb, error %d",
+							__func__, result);
 			goto exit;
 		}
 		buf += size;
@@ -567,12 +559,12 @@ static int klsi_105_write(struct tty_struct *tty,
 	}
 exit:
 	/* lockless, but it's for debug info only... */
-	priv->bytes_out+=bytes_sent;
+	priv->bytes_out += bytes_sent;
 
 	return bytes_sent;	/* that's how much we wrote */
 } /* klsi_105_write */
 
-static void klsi_105_write_bulk_callback ( struct urb *urb)
+static void klsi_105_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	int status = urb->status;
@@ -590,7 +582,7 @@ static void klsi_105_write_bulk_callback ( struct urb *urb)
 
 
 /* return number of characters currently in the writing process */
-static int klsi_105_chars_in_buffer (struct tty_struct *tty)
+static int klsi_105_chars_in_buffer(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	int chars = 0;
@@ -598,21 +590,20 @@ static int klsi_105_chars_in_buffer (struct tty_struct *tty)
 	unsigned long flags;
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 
-	spin_lock_irqsave (&priv->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 
 	for (i = 0; i < NUM_URBS; ++i) {
-		if (priv->write_urb_pool[i]->status == -EINPROGRESS) {
+		if (priv->write_urb_pool[i]->status == -EINPROGRESS)
 			chars += URB_TRANSFER_BUFFER_SIZE;
-		}
 	}
 
-	spin_unlock_irqrestore (&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
-	return (chars);
+	return chars;
 }
 
-static int klsi_105_write_room (struct tty_struct *tty)
+static int klsi_105_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
@@ -620,22 +611,21 @@ static int klsi_105_write_room (struct tty_struct *tty)
 	int room = 0;
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 
-	spin_lock_irqsave (&priv->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 	for (i = 0; i < NUM_URBS; ++i) {
-		if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
+		if (priv->write_urb_pool[i]->status != -EINPROGRESS)
 			room += URB_TRANSFER_BUFFER_SIZE;
-		}
 	}
 
-	spin_unlock_irqrestore (&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
-	return (room);
+	return room;
 }
 
 
 
-static void klsi_105_read_bulk_callback (struct urb *urb)
+static void klsi_105_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
@@ -674,7 +664,7 @@ static void klsi_105_read_bulk_callback (struct urb *urb)
 		 * against re-entry an then mixed-up data because of
 		 * intermixed tty_flip_buffer_push()s
 		 * FIXME
-		 */ 
+		 */
 		usb_serial_debug_data(debug, &port->dev, __func__,
 				      urb->actual_length, data);
 
@@ -694,7 +684,7 @@ static void klsi_105_read_bulk_callback (struct urb *urb)
 		priv->bytes_in += bytes_sent;
 	}
 	/* Continue trying to always read  */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev, 
+	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 		      usb_rcvbulkpipe(port->serial->dev,
 				      port->bulk_in_endpointAddress),
 		      port->read_urb->transfer_buffer,
@@ -703,13 +693,14 @@ static void klsi_105_read_bulk_callback (struct urb *urb)
 		      port);
 	rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	if (rc)
-		err("%s - failed resubmitting read urb, error %d", __func__, rc);
+		err("%s - failed resubmitting read urb, error %d",
+							__func__, rc);
 } /* klsi_105_read_bulk_callback */
 
 
-static void klsi_105_set_termios (struct tty_struct *tty,
-				  struct usb_serial_port *port,
-				  struct ktermios *old_termios)
+static void klsi_105_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 struct ktermios *old_termios)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	unsigned int iflag = tty->termios->c_iflag;
@@ -719,65 +710,63 @@ static void klsi_105_set_termios (struct tty_struct *tty,
 	struct klsi_105_port_settings cfg;
 	unsigned long flags;
 	speed_t baud;
-	
+
 	/* lock while we are modifying the settings */
-	spin_lock_irqsave (&priv->lock, flags);
-	
+	spin_lock_irqsave(&priv->lock, flags);
+
 	/*
 	 * Update baud rate
 	 */
 	baud = tty_get_baud_rate(tty);
 
-	if( (cflag & CBAUD) != (old_cflag & CBAUD) ) {
-	        /* reassert DTR and (maybe) RTS on transition from B0 */
-		if( (old_cflag & CBAUD) == B0 ) {
+	if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
+		/* reassert DTR and (maybe) RTS on transition from B0 */
+		if ((old_cflag & CBAUD) == B0) {
 			dbg("%s: baud was B0", __func__);
 #if 0
 			priv->control_state |= TIOCM_DTR;
 			/* don't set RTS if using hardware flow control */
-			if (!(old_cflag & CRTSCTS)) {
+			if (!(old_cflag & CRTSCTS))
 				priv->control_state |= TIOCM_RTS;
-			}
 			mct_u232_set_modem_ctrl(serial, priv->control_state);
 #endif
 		}
 	}
-	switch(baud) {
-		case 0: /* handled below */
-			break;
-		case 1200:
-			priv->cfg.baudrate = kl5kusb105a_sio_b1200;
-			break;
-		case 2400:
-			priv->cfg.baudrate = kl5kusb105a_sio_b2400;
-			break;
-		case 4800:
-			priv->cfg.baudrate = kl5kusb105a_sio_b4800;
-			break;
-		case 9600:
+	switch (baud) {
+	case 0: /* handled below */
+		break;
+	case 1200:
+		priv->cfg.baudrate = kl5kusb105a_sio_b1200;
+		break;
+	case 2400:
+		priv->cfg.baudrate = kl5kusb105a_sio_b2400;
+		break;
+	case 4800:
+		priv->cfg.baudrate = kl5kusb105a_sio_b4800;
+		break;
+	case 9600:
+		priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+		break;
+	case 19200:
+		priv->cfg.baudrate = kl5kusb105a_sio_b19200;
+		break;
+	case 38400:
+		priv->cfg.baudrate = kl5kusb105a_sio_b38400;
+		break;
+	case 57600:
+		priv->cfg.baudrate = kl5kusb105a_sio_b57600;
+		break;
+	case 115200:
+		priv->cfg.baudrate = kl5kusb105a_sio_b115200;
+		break;
+	default:
+		dbg("KLSI USB->Serial converter:"
+		    " unsupported baudrate request, using default of 9600");
 			priv->cfg.baudrate = kl5kusb105a_sio_b9600;
-			break;
-		case 19200:
-			priv->cfg.baudrate = kl5kusb105a_sio_b19200;
-			break;
-		case 38400:
-			priv->cfg.baudrate = kl5kusb105a_sio_b38400;
-			break;
-		case 57600:
-			priv->cfg.baudrate = kl5kusb105a_sio_b57600;
-			break;
-		case 115200:
-			priv->cfg.baudrate = kl5kusb105a_sio_b115200;
-			break;
-		default:
-			dbg("KLSI USB->Serial converter:"
-			    " unsupported baudrate request, using default"
-			    " of 9600");
-			priv->cfg.baudrate = kl5kusb105a_sio_b9600;
-			baud = 9600;
-			break;
+		baud = 9600;
+		break;
 	}
-	if ((cflag & CBAUD) == B0 ) {
+	if ((cflag & CBAUD) == B0) {
 		dbg("%s: baud is B0", __func__);
 		/* Drop RTS and DTR */
 		/* maybe this should be simulated by sending read
@@ -786,7 +775,7 @@ static void klsi_105_set_termios (struct tty_struct *tty,
 		;
 #if 0
 		priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
-       		mct_u232_set_modem_ctrl(serial, priv->control_state);
+		mct_u232_set_modem_ctrl(serial, priv->control_state);
 #endif
 	}
 	tty_encode_baud_rate(tty, baud, baud);
@@ -796,11 +785,11 @@ static void klsi_105_set_termios (struct tty_struct *tty,
 		switch (cflag & CSIZE) {
 		case CS5:
 			dbg("%s - 5 bits/byte not supported", __func__);
-			spin_unlock_irqrestore (&priv->lock, flags);
+			spin_unlock_irqrestore(&priv->lock, flags);
 			return ;
 		case CS6:
 			dbg("%s - 6 bits/byte not supported", __func__);
-			spin_unlock_irqrestore (&priv->lock, flags);
+			spin_unlock_irqrestore(&priv->lock, flags);
 			return ;
 		case CS7:
 			priv->cfg.databits = kl5kusb105a_dtb_7;
@@ -819,8 +808,7 @@ static void klsi_105_set_termios (struct tty_struct *tty,
 	 * Update line control register (LCR)
 	 */
 	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
-	    || (cflag & CSTOPB) != (old_cflag & CSTOPB) ) {
-		
+	    || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
 		/* Not currently supported */
 		tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB);
 #if 0
@@ -841,20 +829,18 @@ static void klsi_105_set_termios (struct tty_struct *tty,
 #endif
 		;
 	}
-	
 	/*
 	 * Set flow control: well, I do not really now how to handle DTR/RTS.
 	 * Just do what we have seen with SniffUSB on Win98.
 	 */
-	if( (iflag & IXOFF) != (old_iflag & IXOFF)
+	if ((iflag & IXOFF) != (old_iflag & IXOFF)
 	    || (iflag & IXON) != (old_iflag & IXON)
-	    ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) {
-		
+	    ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
 		/* Not currently supported */
 		tty->termios->c_cflag &= ~CRTSCTS;
 		/* Drop DTR/RTS if no flow control otherwise assert */
 #if 0
-		if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) )
+		if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
 			priv->control_state |= TIOCM_DTR | TIOCM_RTS;
 		else
 			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
@@ -862,20 +848,21 @@ static void klsi_105_set_termios (struct tty_struct *tty,
 #endif
 		;
 	}
-	memcpy (&cfg, &priv->cfg, sizeof(cfg));
-	spin_unlock_irqrestore (&priv->lock, flags);
-	
+	memcpy(&cfg, &priv->cfg, sizeof(cfg));
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	/* now commit changes to device */
 	klsi_105_chg_port_settings(port, &cfg);
 } /* klsi_105_set_termios */
 
 
 #if 0
-static void mct_u232_break_ctl( struct tty_struct *tty, int break_state )
+static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
-	struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
+	struct mct_u232_private *priv =
+				(struct mct_u232_private *)port->private;
 	unsigned char lcr = priv->last_lcr;
 
 	dbg("%sstate=%d", __func__, break_state);
@@ -887,7 +874,7 @@ static void mct_u232_break_ctl( struct tty_struct *tty, int break_state )
 } /* mct_u232_break_ctl */
 #endif
 
-static int klsi_105_tiocmget (struct tty_struct *tty, struct file *file)
+static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
@@ -903,18 +890,18 @@ static int klsi_105_tiocmget (struct tty_struct *tty, struct file *file)
 		return rc;
 	}
 
-	spin_lock_irqsave (&priv->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_state = line_state;
-	spin_unlock_irqrestore (&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->lock, flags);
 	dbg("%s - read line state 0x%lx", __func__, line_state);
 	return (int)line_state;
 }
 
-static int klsi_105_tiocmset (struct tty_struct *tty, struct file *file,
-			      unsigned int set, unsigned int clear)
+static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
+			     unsigned int set, unsigned int clear)
 {
 	int retval = -EINVAL;
-	
+
 	dbg("%s", __func__);
 
 /* if this ever gets implemented, it should be done something like this:
@@ -939,14 +926,14 @@ static int klsi_105_tiocmset (struct tty_struct *tty, struct file *file,
 	return retval;
 }
 
-static void klsi_105_throttle (struct tty_struct *tty)
+static void klsi_105_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
 }
 
-static void klsi_105_unthrottle (struct tty_struct *tty)
+static void klsi_105_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	int result;
@@ -962,7 +949,7 @@ static void klsi_105_unthrottle (struct tty_struct *tty)
 
 
 
-static int __init klsi_105_init (void)
+static int __init klsi_105_init(void)
 {
 	int retval;
 	retval = usb_serial_register(&kl5kusb105d_device);
@@ -981,19 +968,19 @@ failed_usb_serial_register:
 }
 
 
-static void __exit klsi_105_exit (void)
+static void __exit klsi_105_exit(void)
 {
-	usb_deregister (&kl5kusb105d_driver);
-	usb_serial_deregister (&kl5kusb105d_device);
+	usb_deregister(&kl5kusb105d_driver);
+	usb_serial_deregister(&kl5kusb105d_device);
 }
 
 
-module_init (klsi_105_init);
-module_exit (klsi_105_exit);
+module_init(klsi_105_init);
+module_exit(klsi_105_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL"); 
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
 
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From dee0a7ccaa0bcdeebb590879d68739cce4ff1b07 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:14:10 +0100
Subject: tty-usb-kobil-sct: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/kobil_sct.c | 557 ++++++++++++++++++++++-------------------
 1 file changed, 297 insertions(+), 260 deletions(-)

diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 40c67f0096b..f0f8353ec1a 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -1,7 +1,7 @@
 /*
  *  KOBIL USB Smart Card Terminal Driver
  *
- *  Copyright (C) 2002  KOBIL Systems GmbH 
+ *  Copyright (C) 2002  KOBIL Systems GmbH
  *  Author: Thomas Wahrenbruch
  *
  *  Contact: linuxusb@kobil.de
@@ -20,7 +20,7 @@
  *
  * Supported readers: USB TWIN, KAAN Standard Plus and SecOVID Reader Plus
  * (Adapter K), B1 Professional and KAAN Professional (Adapter B)
- * 
+ *
  * (21/05/2004) tw
  *      Fix bug with P'n'P readers
  *
@@ -44,7 +44,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/ioctl.h>
@@ -68,13 +68,13 @@ static int debug;
 
 
 /* Function prototypes */
-static int  kobil_startup (struct usb_serial *serial);
-static void kobil_shutdown (struct usb_serial *serial);
-static int  kobil_open (struct tty_struct *tty,
+static int  kobil_startup(struct usb_serial *serial);
+static void kobil_shutdown(struct usb_serial *serial);
+static int  kobil_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void kobil_close (struct tty_struct *tty, struct usb_serial_port *port,
+static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port,
 			struct file *filp);
-static int  kobil_write (struct tty_struct *tty, struct usb_serial_port *port, 
+static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count);
 static int  kobil_write_room(struct tty_struct *tty);
 static int  kobil_ioctl(struct tty_struct *tty, struct file *file,
@@ -82,9 +82,9 @@ static int  kobil_ioctl(struct tty_struct *tty, struct file *file,
 static int  kobil_tiocmget(struct tty_struct *tty, struct file *file);
 static int  kobil_tiocmset(struct tty_struct *tty, struct file *file,
 			   unsigned int set, unsigned int clear);
-static void kobil_read_int_callback( struct urb *urb );
-static void kobil_write_callback( struct urb *purb );
-static void kobil_set_termios(struct tty_struct *tty, 
+static void kobil_read_int_callback(struct urb *urb);
+static void kobil_write_callback(struct urb *purb);
+static void kobil_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 
 
@@ -97,7 +97,7 @@ static struct usb_device_id id_table [] = {
 };
 
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver kobil_driver = {
 	.name =		"kobil",
@@ -134,14 +134,14 @@ static struct usb_serial_driver kobil_device = {
 struct kobil_private {
 	int write_int_endpoint_address;
 	int read_int_endpoint_address;
-	unsigned char buf[KOBIL_BUF_LENGTH]; // buffer for the APDU to send
-	int filled;  // index of the last char in buf
-	int cur_pos; // index of the next char to send in buf
+	unsigned char buf[KOBIL_BUF_LENGTH]; /* buffer for the APDU to send */
+	int filled;  /* index of the last char in buf */
+	int cur_pos; /* index of the next char to send in buf */
 	__u16 device_type;
 };
 
 
-static int kobil_startup (struct usb_serial *serial)
+static int kobil_startup(struct usb_serial *serial)
 {
 	int i;
 	struct kobil_private *priv;
@@ -152,20 +152,20 @@ static int kobil_startup (struct usb_serial *serial)
 	struct usb_host_endpoint *endpoint;
 
 	priv = kmalloc(sizeof(struct kobil_private), GFP_KERNEL);
-	if (!priv){
+	if (!priv)
 		return -ENOMEM;
-	}
 
 	priv->filled = 0;
 	priv->cur_pos = 0;
 	priv->device_type = le16_to_cpu(serial->dev->descriptor.idProduct);
 
-	switch (priv->device_type){
+	switch (priv->device_type) {
 	case KOBIL_ADAPTER_B_PRODUCT_ID:
 		printk(KERN_DEBUG "KOBIL B1 PRO / KAAN PRO detected\n");
 		break;
 	case KOBIL_ADAPTER_K_PRODUCT_ID:
-		printk(KERN_DEBUG "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n");
+		printk(KERN_DEBUG
+		  "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n");
 		break;
 	case KOBIL_USBTWIN_PRODUCT_ID:
 		printk(KERN_DEBUG "KOBIL USBTWIN detected\n");
@@ -176,37 +176,40 @@ static int kobil_startup (struct usb_serial *serial)
 	}
 	usb_set_serial_port_data(serial->port[0], priv);
 
-	// search for the necessary endpoints
+	/* search for the necessary endpoints */
 	pdev = serial->dev;
- 	actconfig = pdev->actconfig;
- 	interface = actconfig->interface[0];
+	actconfig = pdev->actconfig;
+	interface = actconfig->interface[0];
 	altsetting = interface->cur_altsetting;
- 	endpoint = altsetting->endpoint;
-  
- 	for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
+	endpoint = altsetting->endpoint;
+
+	for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
 		endpoint = &altsetting->endpoint[i];
 		if (usb_endpoint_is_int_out(&endpoint->desc)) {
-		 	dbg("%s Found interrupt out endpoint. Address: %d", __func__, endpoint->desc.bEndpointAddress);
-		 	priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress;
- 		}
+			dbg("%s Found interrupt out endpoint. Address: %d",
+				__func__, endpoint->desc.bEndpointAddress);
+			priv->write_int_endpoint_address =
+				endpoint->desc.bEndpointAddress;
+		}
 		if (usb_endpoint_is_int_in(&endpoint->desc)) {
-		 	dbg("%s Found interrupt in  endpoint. Address: %d", __func__, endpoint->desc.bEndpointAddress);
-		 	priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress;
-	 	}
+			dbg("%s Found interrupt in  endpoint. Address: %d",
+				__func__, endpoint->desc.bEndpointAddress);
+			priv->read_int_endpoint_address =
+				endpoint->desc.bEndpointAddress;
+		}
 	}
 	return 0;
 }
 
 
-static void kobil_shutdown (struct usb_serial *serial)
+static void kobil_shutdown(struct usb_serial *serial)
 {
 	int i;
 	dbg("%s - port %d", __func__, serial->port[0]->number);
 
-	for (i=0; i < serial->num_ports; ++i) {
-		while (serial->port[i]->port.count > 0) {
-			kobil_close (NULL, serial->port[i], NULL);
-		}
+	for (i = 0; i < serial->num_ports; ++i) {
+		while (serial->port[i]->port.count > 0)
+			kobil_close(NULL, serial->port[i], NULL);
 		kfree(usb_get_serial_port_data(serial->port[i]));
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -225,7 +228,7 @@ static int kobil_open(struct tty_struct *tty,
 	dbg("%s - port %d", __func__, port->number);
 	priv = usb_get_serial_port_data(port);
 
-	// someone sets the dev to 0 if the close method has been called
+	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
 
@@ -238,96 +241,110 @@ static int kobil_open(struct tty_struct *tty,
 
 		/* Default to echo off and other sane device settings */
 		tty->termios->c_lflag = 0;
-		tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+		tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN |
+								 XCASE);
 		tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
-		tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
-	}	
-	// allocate memory for transfer buffer
+		/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
+		tty->termios->c_oflag &= ~ONLCR;
+	}
+	/* allocate memory for transfer buffer */
 	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
-	if (! transfer_buffer) {
+	if (!transfer_buffer)
 		return -ENOMEM;
-	}
-	
-	// allocate write_urb
-	if (!port->write_urb) { 
-		dbg("%s - port %d  Allocating port->write_urb", __func__, port->number);
-		port->write_urb = usb_alloc_urb(0, GFP_KERNEL);  
+
+	/* allocate write_urb */
+	if (!port->write_urb) {
+		dbg("%s - port %d  Allocating port->write_urb",
+						__func__, port->number);
+		port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!port->write_urb) {
-			dbg("%s - port %d usb_alloc_urb failed", __func__, port->number);
+			dbg("%s - port %d usb_alloc_urb failed",
+						__func__, port->number);
 			kfree(transfer_buffer);
 			return -ENOMEM;
 		}
 	}
 
-	// allocate memory for write_urb transfer buffer
-	port->write_urb->transfer_buffer = kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL);
-	if (! port->write_urb->transfer_buffer) {
+	/* allocate memory for write_urb transfer buffer */
+	port->write_urb->transfer_buffer =
+			kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL);
+	if (!port->write_urb->transfer_buffer) {
 		kfree(transfer_buffer);
 		usb_free_urb(port->write_urb);
 		port->write_urb = NULL;
 		return -ENOMEM;
-	} 
-
-	// get hardware version
-	result = usb_control_msg( port->serial->dev, 
-				  usb_rcvctrlpipe(port->serial->dev, 0 ), 
-				  SUSBCRequest_GetMisc,
-				  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
-				  SUSBCR_MSC_GetHWVersion,
-				  0,
-				  transfer_buffer,
-				  transfer_buffer_length,
-				  KOBIL_TIMEOUT
+	}
+
+	/* get hardware version */
+	result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_GetMisc,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
+			  SUSBCR_MSC_GetHWVersion,
+			  0,
+			  transfer_buffer,
+			  transfer_buffer_length,
+			  KOBIL_TIMEOUT
+	);
+	dbg("%s - port %d Send get_HW_version URB returns: %i",
+		__func__, port->number, result);
+	dbg("Harware version: %i.%i.%i",
+		transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]);
+
+	/* get firmware version */
+	result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_GetMisc,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
+			  SUSBCR_MSC_GetFWVersion,
+			  0,
+			  transfer_buffer,
+			  transfer_buffer_length,
+			  KOBIL_TIMEOUT
+	);
+	dbg("%s - port %d Send get_FW_version URB returns: %i",
+					__func__, port->number, result);
+	dbg("Firmware version: %i.%i.%i",
+		transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]);
+
+	if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
+			priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
+		/* Setting Baudrate, Parity and Stopbits */
+		result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_SetBaudRateParityAndStopBits,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			  SUSBCR_SBR_9600 | SUSBCR_SPASB_EvenParity |
+							SUSBCR_SPASB_1StopBit,
+			  0,
+			  transfer_buffer,
+			  0,
+			  KOBIL_TIMEOUT
 		);
-	dbg("%s - port %d Send get_HW_version URB returns: %i", __func__, port->number, result);
-	dbg("Harware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] );
-	
-	// get firmware version
-	result = usb_control_msg( port->serial->dev, 
-				  usb_rcvctrlpipe(port->serial->dev, 0 ), 
-				  SUSBCRequest_GetMisc,
-				  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
-				  SUSBCR_MSC_GetFWVersion,
-				  0,
-				  transfer_buffer,
-				  transfer_buffer_length,
-				  KOBIL_TIMEOUT
+		dbg("%s - port %d Send set_baudrate URB returns: %i",
+					__func__, port->number, result);
+
+		/* reset all queues */
+		result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_Misc,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			  SUSBCR_MSC_ResetAllQueues,
+			  0,
+			  transfer_buffer,
+			  0,
+			  KOBIL_TIMEOUT
 		);
-	dbg("%s - port %d Send get_FW_version URB returns: %i", __func__, port->number, result);
-	dbg("Firmware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] );
-
-	if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
-		// Setting Baudrate, Parity and Stopbits
-		result = usb_control_msg( port->serial->dev, 
-					  usb_rcvctrlpipe(port->serial->dev, 0 ), 
-					  SUSBCRequest_SetBaudRateParityAndStopBits,
-					  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-					  SUSBCR_SBR_9600 | SUSBCR_SPASB_EvenParity | SUSBCR_SPASB_1StopBit,
-					  0,
-					  transfer_buffer,
-					  0,
-					  KOBIL_TIMEOUT
-			);
-		dbg("%s - port %d Send set_baudrate URB returns: %i", __func__, port->number, result);
-		
-		// reset all queues
-		result = usb_control_msg( port->serial->dev, 
-					  usb_rcvctrlpipe(port->serial->dev, 0 ), 
-					  SUSBCRequest_Misc,
-					  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-					  SUSBCR_MSC_ResetAllQueues,
-					  0,
-					  transfer_buffer,
-					  0,
-					  KOBIL_TIMEOUT
-			);
-		dbg("%s - port %d Send reset_all_queues URB returns: %i", __func__, port->number, result);
+		dbg("%s - port %d Send reset_all_queues URB returns: %i",
+					__func__, port->number, result);
 	}
-	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
+	    priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
 	    priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
-		// start reading (Adapter B 'cause PNP string)
-		result = usb_submit_urb( port->interrupt_in_urb, GFP_ATOMIC  ); 
-		dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result);
+		/* start reading (Adapter B 'cause PNP string) */
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+		dbg("%s - port %d Send read URB returns: %i",
+					__func__, port->number, result);
 	}
 
 	kfree(transfer_buffer);
@@ -342,7 +359,7 @@ static void kobil_close(struct tty_struct *tty,
 
 	if (port->write_urb) {
 		usb_kill_urb(port->write_urb);
-		usb_free_urb( port->write_urb );
+		usb_free_urb(port->write_urb);
 		port->write_urb = NULL;
 	}
 	usb_kill_urb(port->interrupt_in_urb);
@@ -356,7 +373,7 @@ static void kobil_read_int_callback(struct urb *urb)
 	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 	int status = urb->status;
-//	char *dbg_data;
+/*	char *dbg_data; */
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -369,48 +386,50 @@ static void kobil_read_int_callback(struct urb *urb)
 	tty = port->port.tty;
 	if (urb->actual_length) {
 
-		// BEGIN DEBUG
+		/* BEGIN DEBUG */
 		/*
-		  dbg_data = kzalloc((3 *  purb->actual_length + 10) * sizeof(char), GFP_KERNEL);
+		  dbg_data = kzalloc((3 *  purb->actual_length + 10)
+						* sizeof(char), GFP_KERNEL);
 		  if (! dbg_data) {
-		  return;
+			  return;
 		  }
-		  for (i = 0; i < purb->actual_length; i++) { 
-		  sprintf(dbg_data +3*i, "%02X ", data[i]); 
+		  for (i = 0; i < purb->actual_length; i++) {
+			  sprintf(dbg_data +3*i, "%02X ", data[i]);
 		  }
-		  dbg(" <-- %s", dbg_data );
+		  dbg(" <-- %s", dbg_data);
 		  kfree(dbg_data);
 		*/
-		// END DEBUG
+		/* END DEBUG */
 
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
-
-	// someone sets the dev to 0 if the close method has been called
+	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
-	dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result);
+	dbg("%s - port %d Send read URB returns: %i",
+			__func__, port->number, result);
 }
 
 
-static void kobil_write_callback( struct urb *purb )
+static void kobil_write_callback(struct urb *purb)
 {
 }
 
 
-static int kobil_write (struct tty_struct *tty, struct usb_serial_port *port, 
+static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
 	int length = 0;
 	int result = 0;
 	int todo = 0;
-	struct kobil_private * priv;
+	struct kobil_private *priv;
 
 	if (count == 0) {
-		dbg("%s - port %d write request of 0 bytes", __func__, port->number);
+		dbg("%s - port %d write request of 0 bytes",
+						__func__, port->number);
 		return 0;
 	}
 
@@ -421,69 +440,77 @@ static int kobil_write (struct tty_struct *tty, struct usb_serial_port *port,
 		return -ENOMEM;
 	}
 
-	// Copy data to buffer
-	memcpy (priv->buf + priv->filled, buf, count);
-	usb_serial_debug_data(debug, &port->dev, __func__, count, priv->buf + priv->filled);
+	/* Copy data to buffer */
+	memcpy(priv->buf + priv->filled, buf, count);
+	usb_serial_debug_data(debug, &port->dev, __func__, count,
+						priv->buf + priv->filled);
 	priv->filled = priv->filled + count;
 
-	// only send complete block. TWIN, KAAN SIM and adapter K use the same protocol.
-	if ( ((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) || 
-	     ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4))) ) {
-		
-		// stop reading (except TWIN and KAAN SIM)
-		if ( (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) )
+	/* only send complete block. TWIN, KAAN SIM and adapter K
+	   use the same protocol. */
+	if (((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) ||
+	     ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4)))) {
+		/* stop reading (except TWIN and KAAN SIM) */
+		if ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID)
+			|| (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID))
 			usb_kill_urb(port->interrupt_in_urb);
 
 		todo = priv->filled - priv->cur_pos;
 
-		while(todo > 0) {
-			// max 8 byte in one urb (endpoint size)
+		while (todo > 0) {
+			/* max 8 byte in one urb (endpoint size) */
 			length = (todo < 8) ? todo : 8;
-			// copy data to transfer buffer
-			memcpy(port->write_urb->transfer_buffer, priv->buf + priv->cur_pos, length );
-			usb_fill_int_urb( port->write_urb,
-					  port->serial->dev,
-					  usb_sndintpipe(port->serial->dev, priv->write_int_endpoint_address),
-					  port->write_urb->transfer_buffer,
-					  length,
-					  kobil_write_callback,
-					  port,
-					  8
-				);
+			/* copy data to transfer buffer */
+			memcpy(port->write_urb->transfer_buffer,
+					priv->buf + priv->cur_pos, length);
+			usb_fill_int_urb(port->write_urb,
+				  port->serial->dev,
+				  usb_sndintpipe(port->serial->dev,
+					priv->write_int_endpoint_address),
+				  port->write_urb->transfer_buffer,
+				  length,
+				  kobil_write_callback,
+				  port,
+				  8
+			);
 
 			priv->cur_pos = priv->cur_pos + length;
-			result = usb_submit_urb( port->write_urb, GFP_NOIO );
-			dbg("%s - port %d Send write URB returns: %i", __func__, port->number, result);
+			result = usb_submit_urb(port->write_urb, GFP_NOIO);
+			dbg("%s - port %d Send write URB returns: %i",
+					__func__, port->number, result);
 			todo = priv->filled - priv->cur_pos;
 
-			if (todo > 0) {
+			if (todo > 0)
 				msleep(24);
-			}
+		}
 
-		} // end while
-		
 		priv->filled = 0;
 		priv->cur_pos = 0;
 
-		// someone sets the dev to 0 if the close method has been called
+		/* someone sets the dev to 0 if the close method
+		   has been called */
 		port->interrupt_in_urb->dev = port->serial->dev;
-		
-		// start reading (except TWIN and KAAN SIM)
-		if ( (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) ) {
-			// someone sets the dev to 0 if the close method has been called
+
+		/* start reading (except TWIN and KAAN SIM) */
+		if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
+			priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
+			/* someone sets the dev to 0 if the close method has
+			   been called */
 			port->interrupt_in_urb->dev = port->serial->dev;
-			
-			result = usb_submit_urb( port->interrupt_in_urb, GFP_NOIO ); 
-			dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result);
+
+			result = usb_submit_urb(port->interrupt_in_urb,
+								GFP_NOIO);
+			dbg("%s - port %d Send read URB returns: %i",
+					__func__, port->number, result);
 		}
 	}
 	return count;
 }
 
 
-static int kobil_write_room (struct tty_struct *tty)
+static int kobil_write_room(struct tty_struct *tty)
 {
-	//dbg("%s - port %d", __func__, port->number);
+	/* dbg("%s - port %d", __func__, port->number); */
 	/* FIXME */
 	return 8;
 }
@@ -492,34 +519,34 @@ static int kobil_write_room (struct tty_struct *tty)
 static int kobil_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct kobil_private * priv;
+	struct kobil_private *priv;
 	int result;
 	unsigned char *transfer_buffer;
 	int transfer_buffer_length = 8;
 
 	priv = usb_get_serial_port_data(port);
-	if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) {
-		// This device doesn't support ioctl calls
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID
+			|| priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
+		/* This device doesn't support ioctl calls */
 		return -EINVAL;
 	}
 
-	// allocate memory for transfer buffer
+	/* allocate memory for transfer buffer */
 	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
-	if (!transfer_buffer) {
+	if (!transfer_buffer)
 		return -ENOMEM;
-	}
 
-	result = usb_control_msg( port->serial->dev, 
-				  usb_rcvctrlpipe(port->serial->dev, 0 ), 
-				  SUSBCRequest_GetStatusLineState,
-				  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
-				  0,
-				  0,
-				  transfer_buffer,
-				  transfer_buffer_length,
-				  KOBIL_TIMEOUT);
-
-	dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x", 
+	result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_GetStatusLineState,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN,
+			  0,
+			  0,
+			  transfer_buffer,
+			  transfer_buffer_length,
+			  KOBIL_TIMEOUT);
+
+	dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x",
 	    __func__, port->number, result, transfer_buffer[0]);
 
 	result = 0;
@@ -533,7 +560,7 @@ static int kobil_tiocmset(struct tty_struct *tty, struct file *file,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct kobil_private * priv;
+	struct kobil_private *priv;
 	int result;
 	int dtr = 0;
 	int rts = 0;
@@ -542,16 +569,16 @@ static int kobil_tiocmset(struct tty_struct *tty, struct file *file,
 
 	/* FIXME: locking ? */
 	priv = usb_get_serial_port_data(port);
-	if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) {
-		// This device doesn't support ioctl calls
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID
+		|| priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
+		/* This device doesn't support ioctl calls */
 		return -EINVAL;
 	}
 
-	// allocate memory for transfer buffer
+	/* allocate memory for transfer buffer */
 	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
-	if (! transfer_buffer) {
+	if (!transfer_buffer)
 		return -ENOMEM;
-	}
 
 	if (set & TIOCM_RTS)
 		rts = 1;
@@ -564,34 +591,39 @@ static int kobil_tiocmset(struct tty_struct *tty, struct file *file,
 
 	if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
 		if (dtr != 0)
-			dbg("%s - port %d Setting DTR", __func__, port->number);
+			dbg("%s - port %d Setting DTR",
+						__func__, port->number);
 		else
-			dbg("%s - port %d Clearing DTR", __func__, port->number);
-		result = usb_control_msg( port->serial->dev, 
-					  usb_rcvctrlpipe(port->serial->dev, 0 ), 
-					  SUSBCRequest_SetStatusLinesOrQueues,
-					  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-					  ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
-					  0,
-					  transfer_buffer,
-					  0,
-					  KOBIL_TIMEOUT);
+			dbg("%s - port %d Clearing DTR",
+						__func__, port->number);
+		result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_SetStatusLinesOrQueues,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			  ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
+			  0,
+			  transfer_buffer,
+			  0,
+			  KOBIL_TIMEOUT);
 	} else {
 		if (rts != 0)
-			dbg("%s - port %d Setting RTS", __func__, port->number);
+			dbg("%s - port %d Setting RTS",
+						__func__, port->number);
 		else
-			dbg("%s - port %d Clearing RTS", __func__, port->number);
-		result = usb_control_msg( port->serial->dev, 
-					  usb_rcvctrlpipe(port->serial->dev, 0 ), 
-					  SUSBCRequest_SetStatusLinesOrQueues,
-					  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-					  ((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
-					  0,
-					  transfer_buffer,
-					  0,
-					  KOBIL_TIMEOUT);
+			dbg("%s - port %d Clearing RTS",
+						__func__, port->number);
+		result = usb_control_msg(port->serial->dev,
+			usb_rcvctrlpipe(port->serial->dev, 0),
+			SUSBCRequest_SetStatusLinesOrQueues,
+			USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
+			0,
+			transfer_buffer,
+			0,
+			KOBIL_TIMEOUT);
 	}
-	dbg("%s - port %d Send set_status_line URB returns: %i", __func__, port->number, result);
+	dbg("%s - port %d Send set_status_line URB returns: %i",
+					__func__, port->number, result);
 	kfree(transfer_buffer);
 	return (result < 0) ? result : 0;
 }
@@ -599,32 +631,35 @@ static int kobil_tiocmset(struct tty_struct *tty, struct file *file,
 static void kobil_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old)
 {
-	struct kobil_private * priv;
+	struct kobil_private *priv;
 	int result;
 	unsigned short urb_val = 0;
 	int c_cflag = tty->termios->c_cflag;
 	speed_t speed;
-	void * settings;
+	void *settings;
 
 	priv = usb_get_serial_port_data(port);
-	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
-		// This device doesn't support ioctl calls
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
+			priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
+		/* This device doesn't support ioctl calls */
 		return;
 
-	switch (speed = tty_get_baud_rate(tty)) {
-		case 1200:
-			urb_val = SUSBCR_SBR_1200;
-			break;
-		default:
-			speed = 9600;
-		case 9600:
-			urb_val = SUSBCR_SBR_9600;
-			break;
+	speed = tty_get_baud_rate(tty);
+	switch (speed) {
+	case 1200:
+		urb_val = SUSBCR_SBR_1200;
+		break;
+	default:
+		speed = 9600;
+	case 9600:
+		urb_val = SUSBCR_SBR_9600;
+		break;
 	}
-	urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
+	urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits :
+							SUSBCR_SPASB_1StopBit;
 
 	settings = kzalloc(50, GFP_KERNEL);
-	if (! settings)
+	if (!settings)
 		return;
 
 	sprintf(settings, "%d ", speed);
@@ -644,48 +679,50 @@ static void kobil_set_termios(struct tty_struct *tty,
 	tty->termios->c_cflag &= ~CMSPAR;
 	tty_encode_baud_rate(tty, speed, speed);
 
-	result = usb_control_msg( port->serial->dev,
-				  usb_rcvctrlpipe(port->serial->dev, 0 ),
-				  SUSBCRequest_SetBaudRateParityAndStopBits,
-				  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-				  urb_val,
-				  0,
-				  settings,
-				  0,
-				  KOBIL_TIMEOUT
+	result = usb_control_msg(port->serial->dev,
+		  usb_rcvctrlpipe(port->serial->dev, 0),
+		  SUSBCRequest_SetBaudRateParityAndStopBits,
+		  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+		  urb_val,
+		  0,
+		  settings,
+		  0,
+		  KOBIL_TIMEOUT
 		);
 	kfree(settings);
 }
 
-static int kobil_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int kobil_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct kobil_private * priv = usb_get_serial_port_data(port);
+	struct kobil_private *priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
 	int transfer_buffer_length = 8;
 	int result;
 
-	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
-		// This device doesn't support ioctl calls
+	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
+			priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
+		/* This device doesn't support ioctl calls */
 		return 0;
 
 	switch (cmd) {
 	case TCFLSH:
 		transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
-		if (! transfer_buffer)
-		 	return -ENOBUFS;
-
-		result = usb_control_msg( port->serial->dev, 
-		 			  usb_rcvctrlpipe(port->serial->dev, 0 ), 
-					  SUSBCRequest_Misc,
-					  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-					  SUSBCR_MSC_ResetAllQueues,
-					  0,
-					  NULL,//transfer_buffer,
-					  0,
-					  KOBIL_TIMEOUT
+		if (!transfer_buffer)
+			return -ENOBUFS;
+
+		result = usb_control_msg(port->serial->dev,
+			  usb_rcvctrlpipe(port->serial->dev, 0),
+			  SUSBCRequest_Misc,
+			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+			  SUSBCR_MSC_ResetAllQueues,
+			  0,
+			  NULL, /* transfer_buffer, */
+			  0,
+			  KOBIL_TIMEOUT
 			);
-		
+
 		dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __func__, port->number, result);
 		kfree(transfer_buffer);
 		return (result < 0) ? -EIO: 0;
@@ -694,14 +731,14 @@ static int kobil_ioctl(struct tty_struct *tty, struct file * file, unsigned int
 	}
 }
 
-static int __init kobil_init (void)
+static int __init kobil_init(void)
 {
 	int retval;
 	retval = usb_serial_register(&kobil_device);
 	if (retval)
 		goto failed_usb_serial_register;
 	retval = usb_register(&kobil_driver);
-	if (retval) 
+	if (retval)
 		goto failed_usb_register;
 
 	info(DRIVER_VERSION " " DRIVER_AUTHOR);
@@ -715,18 +752,18 @@ failed_usb_serial_register:
 }
 
 
-static void __exit kobil_exit (void)
+static void __exit kobil_exit(void)
 {
-	usb_deregister (&kobil_driver);
-	usb_serial_deregister (&kobil_device);
+	usb_deregister(&kobil_driver);
+	usb_serial_deregister(&kobil_device);
 }
 
 module_init(kobil_init);
 module_exit(kobil_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE( "GPL" );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-- 
cgit v1.2.3


From b31f658b0bb42b315c22ae2ef814e5fba36ac737 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:14:22 +0100
Subject: kobil_sct: Fix ioctls

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/kobil_sct.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index f0f8353ec1a..deba28ec77e 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -640,9 +640,11 @@ static void kobil_set_termios(struct tty_struct *tty,
 
 	priv = usb_get_serial_port_data(port);
 	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
-			priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
+			priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
 		/* This device doesn't support ioctl calls */
+		*tty->termios = *old;
 		return;
+	}
 
 	speed = tty_get_baud_rate(tty);
 	switch (speed) {
@@ -704,7 +706,7 @@ static int kobil_ioctl(struct tty_struct *tty, struct file *file,
 	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
 			priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
 		/* This device doesn't support ioctl calls */
-		return 0;
+		return -ENOIOCTLCMD;
 
 	switch (cmd) {
 	case TCFLSH:
-- 
cgit v1.2.3


From e19b2560be568301ec4cc486671361ef0471d839 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:14:30 +0100
Subject: tty-usb-mct-u232: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/mct_u232.c | 273 ++++++++++++++++++++++--------------------
 1 file changed, 141 insertions(+), 132 deletions(-)

diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 7bce4302a5f..7a804d6b3a4 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -33,10 +33,11 @@
  *   - Fixed an endianess problem with the baudrate selection for PowerPC.
  *
  * 06-Dec-2001 Martin Hamilton <martinh@gnu.org>
- *	Added support for the Belkin F5U109 DB9 adaptor
+ *   - Added support for the Belkin F5U109 DB9 adaptor
  *
  * 30-May-2001 Greg Kroah-Hartman
- *	switched from using spinlock to a semaphore, which fixes lots of problems.
+ *   - switched from using spinlock to a semaphore, which fixes lots of
+ *     problems.
  *
  * 04-May-2001 Stelian Pop
  *   - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes
@@ -49,7 +50,7 @@
  * 08-Apr-2001 gb
  *   - Identify version on module load.
  *
- * 06-Jan-2001 Cornel Ciocirlan 
+ * 06-Jan-2001 Cornel Ciocirlan
  *   - Added support for Sitecom U232-P25 model (Product Id 0x0230)
  *   - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200)
  *
@@ -59,8 +60,8 @@
  *     (lots of things will change if/when the usb-serial core changes to
  *     handle these issues.
  *
- * 27-Nov-2000 Wolfgang Grandegger
- *   A version for kernel 2.4.0-test10 released to the Linux community 
+ * 27-Nov-2000 Wolfgang Grandegge
+ *   A version for kernel 2.4.0-test10 released to the Linux community
  *   (via linux-usb-devel).
  */
 
@@ -73,7 +74,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "mct_u232.h"
@@ -90,27 +91,21 @@ static int debug;
 /*
  * Function prototypes
  */
-static int  mct_u232_startup	         (struct usb_serial *serial);
-static void mct_u232_shutdown	         (struct usb_serial *serial);
-static int  mct_u232_open	         (struct tty_struct *tty,
-					  struct usb_serial_port *port,
-					  struct file *filp);
-static void mct_u232_close	         (struct tty_struct *tty,
-					  struct usb_serial_port *port,
-					  struct file *filp);
-static void mct_u232_read_int_callback   (struct urb *urb);
-static void mct_u232_set_termios         (struct tty_struct *tty,
-					  struct usb_serial_port *port,
-					  struct ktermios * old);
-static void mct_u232_break_ctl	         (struct tty_struct *tty,
-					  int break_state );
-static int  mct_u232_tiocmget		 (struct tty_struct *tty,
-					  struct file *file);
-static int  mct_u232_tiocmset		 (struct tty_struct *tty,
-					  struct file *file, unsigned int set,
-					  unsigned int clear);
-static void mct_u232_throttle		 (struct tty_struct *tty);
-static void mct_u232_unthrottle		 (struct tty_struct *tty);
+static int  mct_u232_startup(struct usb_serial *serial);
+static void mct_u232_shutdown(struct usb_serial *serial);
+static int  mct_u232_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void mct_u232_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void mct_u232_read_int_callback(struct urb *urb);
+static void mct_u232_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
+static int  mct_u232_tiocmget(struct tty_struct *tty, struct file *file);
+static int  mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
+			unsigned int set, unsigned int clear);
+static void mct_u232_throttle(struct tty_struct *tty);
+static void mct_u232_unthrottle(struct tty_struct *tty);
 
 
 /*
@@ -124,7 +119,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ }		/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver mct_u232_driver = {
 	.name =		"mct_u232",
@@ -178,23 +173,34 @@ struct mct_u232_private {
  * Later day 2.6.0-test kernels have new baud rates like B230400 which
  * we do not know how to support. We ignore them for the moment.
  */
-static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value, speed_t *result)
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
+					speed_t value, speed_t *result)
 {
 	*result = value;
 
 	if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID
-	  || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) {
+		|| le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) {
 		switch (value) {
-		case    300: return 0x01;
-		case    600: return 0x02; /* this one not tested */
-		case   1200: return 0x03;
-		case   2400: return 0x04;
-		case   4800: return 0x06;
-		case   9600: return 0x08;
-		case  19200: return 0x09;
-		case  38400: return 0x0a;
-		case  57600: return 0x0b;
-		case 115200: return 0x0c;
+		case 300:
+			return 0x01;
+		case 600:
+			return 0x02; /* this one not tested */
+		case 1200:
+			return 0x03;
+		case 2400:
+			return 0x04;
+		case 4800:
+			return 0x06;
+		case 9600:
+			return 0x08;
+		case 19200:
+			return 0x09;
+		case 38400:
+			return 0x0a;
+		case 57600:
+			return 0x0b;
+		case 115200:
+			return 0x0c;
 		default:
 			*result = 9600;
 			return 0x08;
@@ -226,18 +232,19 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 	struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
 {
 	__le32 divisor;
-        int rc;
-        unsigned char zero_byte = 0;
-        unsigned char cts_enable_byte = 0;
-        speed_t speed;
-
-	divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value, &speed));
-
-        rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-                             MCT_U232_SET_BAUD_RATE_REQUEST,
-			     MCT_U232_SET_REQUEST_TYPE,
-                             0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
-			     WDR_TIMEOUT);
+	int rc;
+	unsigned char zero_byte = 0;
+	unsigned char cts_enable_byte = 0;
+	speed_t speed;
+
+	divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value,
+								&speed));
+
+	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				MCT_U232_SET_BAUD_RATE_REQUEST,
+				MCT_U232_SET_REQUEST_TYPE,
+				0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
+				WDR_TIMEOUT);
 	if (rc < 0)	/*FIXME: What value speed results */
 		err("Set BAUD RATE %d failed (error = %d)", value, rc);
 	else
@@ -256,55 +263,55 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 	   whether data will be transmitted to a device which is not asserting
 	   the 'CTS' signal.  If the second message's data byte is zero, data
 	   will be transmitted even if 'CTS' is not asserted (i.e. no hardware
-	   flow control).  if the second message's data byte is nonzero (a value
-	   of 1 is used by this driver), data will not be transmitted to a device
-	   which is not asserting 'CTS'.
+	   flow control).  if the second message's data byte is nonzero (a
+	   value of 1 is used by this driver), data will not be transmitted to
+	   a device which is not asserting 'CTS'.
 	*/
 
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			     MCT_U232_SET_UNKNOWN1_REQUEST, 
-			     MCT_U232_SET_REQUEST_TYPE,
-			     0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE, 
-			     WDR_TIMEOUT);
+				MCT_U232_SET_UNKNOWN1_REQUEST,
+				MCT_U232_SET_REQUEST_TYPE,
+				0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE,
+				WDR_TIMEOUT);
 	if (rc < 0)
-		err("Sending USB device request code %d failed (error = %d)", 
+		err("Sending USB device request code %d failed (error = %d)",
 		    MCT_U232_SET_UNKNOWN1_REQUEST, rc);
 
-	if (port && C_CRTSCTS(tty)) {
+	if (port && C_CRTSCTS(tty))
 	   cts_enable_byte = 1;
-	}
 
-        dbg("set_baud_rate: send second control message, data = %02X", cts_enable_byte);
+	dbg("set_baud_rate: send second control message, data = %02X",
+							cts_enable_byte);
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			     MCT_U232_SET_CTS_REQUEST,
-			     MCT_U232_SET_REQUEST_TYPE,
-			     0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE,
-			     WDR_TIMEOUT);
+			MCT_U232_SET_CTS_REQUEST,
+			MCT_U232_SET_REQUEST_TYPE,
+			0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE,
+			WDR_TIMEOUT);
 	if (rc < 0)
-	  err("Sending USB device request code %d failed (error = %d)",
-	      MCT_U232_SET_CTS_REQUEST, rc);
+		err("Sending USB device request code %d failed (error = %d)",
+					MCT_U232_SET_CTS_REQUEST, rc);
 
-        return rc;
+	return rc;
 } /* mct_u232_set_baud_rate */
 
 static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
 {
-        int rc;
-        rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-                             MCT_U232_SET_LINE_CTRL_REQUEST,
-			     MCT_U232_SET_REQUEST_TYPE,
-                             0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE,
-			     WDR_TIMEOUT);
+	int rc;
+	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			MCT_U232_SET_LINE_CTRL_REQUEST,
+			MCT_U232_SET_REQUEST_TYPE,
+			0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE,
+			WDR_TIMEOUT);
 	if (rc < 0)
 		err("Set LINE CTRL 0x%x failed (error = %d)", lcr, rc);
 	dbg("set_line_ctrl: 0x%x", lcr);
-        return rc;
+	return rc;
 } /* mct_u232_set_line_ctrl */
 
 static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
 				   unsigned int control_state)
 {
-        int rc;
+	int rc;
 	unsigned char mcr = MCT_U232_MCR_NONE;
 
 	if (control_state & TIOCM_DTR)
@@ -312,37 +319,39 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
 	if (control_state & TIOCM_RTS)
 		mcr |= MCT_U232_MCR_RTS;
 
-        rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-                             MCT_U232_SET_MODEM_CTRL_REQUEST,
-			     MCT_U232_SET_REQUEST_TYPE,
-                             0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE,
-			     WDR_TIMEOUT);
+	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			MCT_U232_SET_MODEM_CTRL_REQUEST,
+			MCT_U232_SET_REQUEST_TYPE,
+			0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE,
+			WDR_TIMEOUT);
 	if (rc < 0)
 		err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc);
 	dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
 
-        return rc;
+	return rc;
 } /* mct_u232_set_modem_ctrl */
 
-static int mct_u232_get_modem_stat(struct usb_serial *serial, unsigned char *msr)
+static int mct_u232_get_modem_stat(struct usb_serial *serial,
+						unsigned char *msr)
 {
-        int rc;
-        rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-                             MCT_U232_GET_MODEM_STAT_REQUEST,
-			     MCT_U232_GET_REQUEST_TYPE,
-                             0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE,
-			     WDR_TIMEOUT);
+	int rc;
+	rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			MCT_U232_GET_MODEM_STAT_REQUEST,
+			MCT_U232_GET_REQUEST_TYPE,
+			0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE,
+			WDR_TIMEOUT);
 	if (rc < 0) {
 		err("Get MODEM STATus failed (error = %d)", rc);
 		*msr = 0;
 	}
 	dbg("get_modem_stat: 0x%x", *msr);
-        return rc;
+	return rc;
 } /* mct_u232_get_modem_stat */
 
-static void mct_u232_msr_to_state(unsigned int *control_state, unsigned char msr)
+static void mct_u232_msr_to_state(unsigned int *control_state,
+						unsigned char msr)
 {
- 	/* Translate Control Line states */
+	/* Translate Control Line states */
 	if (msr & MCT_U232_MSR_DSR)
 		*control_state |=  TIOCM_DSR;
 	else
@@ -359,14 +368,14 @@ static void mct_u232_msr_to_state(unsigned int *control_state, unsigned char msr
 		*control_state |=  TIOCM_CD;
 	else
 		*control_state &= ~TIOCM_CD;
- 	dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state);
+	dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state);
 } /* mct_u232_msr_to_state */
 
 /*
  * Driver's tty interface functions
  */
 
-static int mct_u232_startup (struct usb_serial *serial)
+static int mct_u232_startup(struct usb_serial *serial)
 {
 	struct mct_u232_private *priv;
 	struct usb_serial_port *port, *rport;
@@ -388,18 +397,18 @@ static int mct_u232_startup (struct usb_serial *serial)
 	rport->interrupt_in_urb = NULL;
 	port->read_urb->context = port;
 
-	return (0);
+	return 0;
 } /* mct_u232_startup */
 
 
-static void mct_u232_shutdown (struct usb_serial *serial)
+static void mct_u232_shutdown(struct usb_serial *serial)
 {
 	struct mct_u232_private *priv;
 	int i;
-	
+
 	dbg("%s", __func__);
 
-	for (i=0; i < serial->num_ports; ++i) {
+	for (i = 0; i < serial->num_ports; ++i) {
 		/* My special items, the standard routines free my urbs */
 		priv = usb_get_serial_port_data(serial->port[i]);
 		if (priv) {
@@ -409,7 +418,7 @@ static void mct_u232_shutdown (struct usb_serial *serial)
 	}
 } /* mct_u232_shutdown */
 
-static int  mct_u232_open (struct tty_struct *tty,
+static int  mct_u232_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
@@ -427,10 +436,11 @@ static int  mct_u232_open (struct tty_struct *tty,
 	 * it seems to be able to accept only 16 bytes (and that's what
 	 * SniffUSB says too...)
 	 */
-	if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID)
+	if (le16_to_cpu(serial->dev->descriptor.idProduct)
+						== MCT_U232_SITECOM_PID)
 		port->bulk_out_size = 16;
 
-	/* Do a defined restart: the normal serial device seems to 
+	/* Do a defined restart: the normal serial device seems to
 	 * always turn on DTR and RTS here, so do the same. I'm not
 	 * sure if this is really necessary. But it should not harm
 	 * either.
@@ -440,8 +450,8 @@ static int  mct_u232_open (struct tty_struct *tty,
 		priv->control_state = TIOCM_DTR | TIOCM_RTS;
 	else
 		priv->control_state = 0;
-	
-	priv->last_lcr = (MCT_U232_DATA_BITS_8 | 
+
+	priv->last_lcr = (MCT_U232_DATA_BITS_8 |
 			  MCT_U232_PARITY_NONE |
 			  MCT_U232_STOP_BITS_1);
 	control_state = priv->control_state;
@@ -488,7 +498,7 @@ static void mct_u232_close(struct tty_struct *tty,
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	dbg("%s port %d", __func__, port->number);
 
-   	if (tty) {
+	if (tty) {
 		c_cflag = tty->termios->c_cflag;
 		mutex_lock(&port->serial->disc_mutex);
 		if (c_cflag & HUPCL && !port->serial->disconnected) {
@@ -512,7 +522,7 @@ static void mct_u232_close(struct tty_struct *tty,
 } /* mct_u232_close */
 
 
-static void mct_u232_read_int_callback (struct urb *urb)
+static void mct_u232_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
@@ -545,8 +555,9 @@ static void mct_u232_read_int_callback (struct urb *urb)
 		return;
 	}
 
-        dbg("%s - port %d", __func__, port->number);
-	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+	dbg("%s - port %d", __func__, port->number);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+					urb->actual_length, data);
 
 	/*
 	 * Work-a-round: handle the 'usual' bulk-in pipe here
@@ -555,26 +566,25 @@ static void mct_u232_read_int_callback (struct urb *urb)
 		int i;
 		tty = port->port.tty;
 		if (urb->actual_length) {
-			for (i = 0; i < urb->actual_length ; ++i) {
+			for (i = 0; i < urb->actual_length ; ++i)
 				tty_insert_flip_char(tty, data[i], 0);
-			}
 			tty_flip_buffer_push(tty);
 		}
 		goto exit;
 	}
-	
+
 	/*
 	 * The interrupt-in pipe signals exceptional conditions (modem line
 	 * signal changes and errors). data[0] holds MSR, data[1] holds LSR.
 	 */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->last_msr = data[MCT_U232_MSR_INDEX];
-	
+
 	/* Record Control Line states */
 	mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
 
 #if 0
-	/* Not yet handled. See belin_sa.c for further information */
+	/* Not yet handled. See belkin_sa.c for further information */
 	/* Now to report any errors */
 	priv->last_lsr = data[MCT_U232_LSR_INDEX];
 	/*
@@ -600,15 +610,15 @@ static void mct_u232_read_int_callback (struct urb *urb)
 #endif
 	spin_unlock_irqrestore(&priv->lock, flags);
 exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
+		err("%s - usb_submit_urb failed with result %d",
 		     __func__, retval);
 } /* mct_u232_read_int_callback */
 
-static void mct_u232_set_termios (struct tty_struct *tty,
-				  struct usb_serial_port *port,
-				  struct ktermios *old_termios)
+static void mct_u232_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
@@ -632,7 +642,7 @@ static void mct_u232_set_termios (struct tty_struct *tty,
 	 * Premature optimization is the root of all evil.
 	 */
 
-        /* reassert DTR and RTS on transition from B0 */
+	/* reassert DTR and RTS on transition from B0 */
 	if ((old_cflag & CBAUD) == B0) {
 		dbg("%s: baud was B0", __func__);
 		control_state |= TIOCM_DTR | TIOCM_RTS;
@@ -641,11 +651,11 @@ static void mct_u232_set_termios (struct tty_struct *tty,
 
 	mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty));
 
-	if ((cflag & CBAUD) == B0 ) {
+	if ((cflag & CBAUD) == B0) {
 		dbg("%s: baud is B0", __func__);
 		/* Drop RTS and DTR */
 		control_state &= ~(TIOCM_DTR | TIOCM_RTS);
-       		mct_u232_set_modem_ctrl(serial, control_state);
+		mct_u232_set_modem_ctrl(serial, control_state);
 	}
 
 	/*
@@ -717,7 +727,7 @@ static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file)
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned int control_state;
 	unsigned long flags;
-	
+
 	dbg("%s", __func__);
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -735,7 +745,7 @@ static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned int control_state;
 	unsigned long flags;
-	
+
 	dbg("%s", __func__);
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -798,7 +808,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
 	}
 }
 
-static int __init mct_u232_init (void)
+static int __init mct_u232_init(void)
 {
 	int retval;
 	retval = usb_serial_register(&mct_u232_device);
@@ -816,18 +826,17 @@ failed_usb_serial_register:
 }
 
 
-static void __exit mct_u232_exit (void)
+static void __exit mct_u232_exit(void)
 {
-	usb_deregister (&mct_u232_driver);
-	usb_serial_deregister (&mct_u232_device);
+	usb_deregister(&mct_u232_driver);
+	usb_serial_deregister(&mct_u232_device);
 }
 
-
-module_init (mct_u232_init);
+module_init(mct_u232_init);
 module_exit(mct_u232_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From acc80758abc91e5d91f3f4ceb8dd94da2aa7064d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:14:40 +0100
Subject: mct_u232: Use flip buffer functions

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/mct_u232.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 7a804d6b3a4..0ded8bd6ec8 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -563,11 +563,9 @@ static void mct_u232_read_int_callback(struct urb *urb)
 	 * Work-a-round: handle the 'usual' bulk-in pipe here
 	 */
 	if (urb->transfer_buffer_length > 2) {
-		int i;
 		tty = port->port.tty;
 		if (urb->actual_length) {
-			for (i = 0; i < urb->actual_length ; ++i)
-				tty_insert_flip_char(tty, data[i], 0);
+			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
 		}
 		goto exit;
-- 
cgit v1.2.3


From 3a0f43e9deffd9619ac34e3b6b9ba7089aa1e511 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:14:49 +0100
Subject: tty-usb-pl2303: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/pl2303.c | 64 +++++++++++++++++++++++++--------------------
 1 file changed, 36 insertions(+), 28 deletions(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index a0016725d31..2c9c446ad62 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -10,7 +10,8 @@
  *	modify it under the terms of the GNU General Public License version
  *	2 as published by the Free Software Foundation.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  */
 
@@ -25,7 +26,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "pl2303.h"
@@ -116,7 +117,7 @@ static struct usb_driver pl2303_driver = {
 #define CONTROL_RTS			0x02
 
 #define BREAK_REQUEST_TYPE		0x21
-#define BREAK_REQUEST			0x23	
+#define BREAK_REQUEST			0x23
 #define BREAK_ON			0xffff
 #define BREAK_OFF			0x0000
 
@@ -222,7 +223,7 @@ static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
 	if (pb == NULL)
 		return 0;
 
-	return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
+	return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
 }
 
 /*
@@ -236,7 +237,7 @@ static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
 	if (pb == NULL)
 		return 0;
 
-	return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+	return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
 }
 
 /*
@@ -395,7 +396,7 @@ static int pl2303_startup(struct usb_serial *serial)
 
 cleanup:
 	kfree(buf);
-	for (--i; i>=0; --i) {
+	for (--i; i >= 0; --i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
 		pl2303_buf_free(priv->buf);
 		kfree(priv);
@@ -407,7 +408,7 @@ cleanup:
 static int set_control_lines(struct usb_device *dev, u8 value)
 {
 	int retval;
-	
+
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				 SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
 				 value, 0, NULL, 0, 100);
@@ -452,7 +453,7 @@ static void pl2303_send(struct usb_serial_port *port)
 		dev_err(&port->dev, "%s - failed submitting write urb,"
 			" error %d\n", __func__, result);
 		priv->write_urb_in_use = 0;
-		// TODO: reschedule pl2303_send
+		/* TODO: reschedule pl2303_send */
 	}
 
 	usb_serial_port_softint(port);
@@ -561,11 +562,19 @@ static void pl2303_set_termios(struct tty_struct *tty,
 
 	if (cflag & CSIZE) {
 		switch (cflag & CSIZE) {
-			case CS5:	buf[6] = 5;	break;
-			case CS6:	buf[6] = 6;	break;
-			case CS7:	buf[6] = 7;	break;
-			default:
-			case CS8:	buf[6] = 8;	break;
+		case CS5:
+			buf[6] = 5;
+			break;
+		case CS6:
+			buf[6] = 6;
+			break;
+		case CS7:
+			buf[6] = 7;
+			break;
+		default:
+		case CS8:
+			buf[6] = 8;
+			break;
 		}
 		dbg("%s - data bits = %d", __func__, buf[6]);
 	}
@@ -694,7 +703,7 @@ static void pl2303_close(struct tty_struct *tty,
 	/* that is not unnecessarily long) */
 	bps = tty_get_baud_rate(tty);
 	if (bps > 1200)
-		timeout = max((HZ*2560)/bps,HZ/10);
+		timeout = max((HZ*2560)/bps, HZ/10);
 	else
 		timeout = 2*HZ;
 	schedule_timeout_interruptible(timeout);
@@ -740,7 +749,7 @@ static int pl2303_open(struct tty_struct *tty,
 	if (tty)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
-	//FIXME: need to assert RTS and DTR if CRTSCTS off
+	/* FIXME: need to assert RTS and DTR if CRTSCTS off */
 
 	dbg("%s - submitting read urb", __func__);
 	port->read_urb->dev = serial->dev;
@@ -843,12 +852,12 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 		status = priv->line_status;
 		spin_unlock_irqrestore(&priv->lock, flags);
 
-		changed=prevstatus^status;
+		changed = prevstatus ^ status;
 
 		if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
 		    ((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
 		    ((arg & TIOCM_CD)  && (changed & UART_DCD)) ||
-		    ((arg & TIOCM_CTS) && (changed & UART_CTS)) ) {
+		    ((arg & TIOCM_CTS) && (changed & UART_CTS))) {
 			return 0;
 		}
 		prevstatus = status;
@@ -864,15 +873,13 @@ static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
 	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 
 	switch (cmd) {
-		case TIOCMIWAIT:
-			dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
-			return wait_modem_info(port, arg);
-
-		default:
-			dbg("%s not supported = 0x%04x", __func__, cmd);
-			break;
+	case TIOCMIWAIT:
+		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		return wait_modem_info(port, arg);
+	default:
+		dbg("%s not supported = 0x%04x", __func__, cmd);
+		break;
 	}
-
 	return -ENOIOCTLCMD;
 }
 
@@ -889,7 +896,8 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 		state = BREAK_OFF;
 	else
 		state = BREAK_ON;
-	dbg("%s - turning break %s", __func__, state==BREAK_OFF ? "off" : "on");
+	dbg("%s - turning break %s", __func__,
+			state == BREAK_OFF ? "off" : "on");
 
 	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
@@ -943,7 +951,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 	if (actual_length < length)
 		return;
 
-        /* Save off the uart status for others to look at */
+	/* Save off the uart status for others to look at */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_status = data[status_idx];
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -1042,7 +1050,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 
 	/* break takes precedence over parity, */
 	/* which takes precedence over framing errors */
-	if (line_status & UART_BREAK_ERROR )
+	if (line_status & UART_BREAK_ERROR)
 		tty_flag = TTY_BREAK;
 	else if (line_status & UART_PARITY_ERROR)
 		tty_flag = TTY_PARITY;
-- 
cgit v1.2.3


From 9660ea36bdcd4c33174e912a3e649c048d22a3d6 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:14:59 +0100
Subject: tty-usb-sierra: Coding style - minor

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/sierra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 892020d4855..2f6f1523ec5 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -757,7 +757,7 @@ failed_device_register:
 
 static void __exit sierra_exit(void)
 {
-	usb_deregister (&sierra_driver);
+	usb_deregister(&sierra_driver);
 	usb_serial_deregister(&sierra_device);
 }
 
-- 
cgit v1.2.3


From 0487b583f268ea43ededd7897dbf519bdcb395ee Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:15:08 +0100
Subject: tty-usb-spcp8x5: Minor coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/spcp8x5.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 58495f5cca1..283cf6b36b2 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -208,7 +208,7 @@ static inline unsigned int ringbuf_avail_data(struct ringbuf *pb)
 {
 	if (pb == NULL)
 		return 0;
-	return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
+	return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
 }
 
 /* get the number of space in the pipo */
@@ -216,7 +216,7 @@ static inline unsigned int ringbuf_avail_space(struct ringbuf *pb)
 {
 	if (pb == NULL)
 		return 0;
-	return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+	return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
 }
 
 /* put count data into pipo */
-- 
cgit v1.2.3


From a30fa793f35b9a72fdb9ea90a539c8c9cf7bee94 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:15:17 +0100
Subject: tty-usb-ti-usb: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 266 +++++++++++++++++++---------------
 1 file changed, 151 insertions(+), 115 deletions(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 48831a755fc..e39c779e416 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -16,7 +16,7 @@
  * For questions or problems with this driver, contact Texas Instruments
  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  * Peter Berger <pberger@brimson.com>.
- * 
+ *
  * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
  * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
  * configuration.
@@ -82,7 +82,7 @@
 #include <linux/serial.h>
 #include <linux/circ_buf.h>
 #include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/firmware.h>
@@ -151,21 +151,22 @@ struct ti_device {
 static int ti_startup(struct usb_serial *serial);
 static void ti_shutdown(struct usb_serial *serial);
 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *file);
+		struct file *file);
 static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *file);
+		struct file *file);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
-				const unsigned char *data, int count);
+		const unsigned char *data, int count);
 static int ti_write_room(struct tty_struct *tty);
 static int ti_chars_in_buffer(struct tty_struct *tty);
 static void ti_throttle(struct tty_struct *tty);
 static void ti_unthrottle(struct tty_struct *tty);
-static int ti_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
-static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port,
-	struct ktermios *old_termios);
+static int ti_ioctl(struct tty_struct *tty, struct file *file,
+		unsigned int cmd, unsigned long arg);
+static void ti_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios);
 static int ti_tiocmget(struct tty_struct *tty, struct file *file);
 static int ti_tiocmset(struct tty_struct *tty, struct file *file,
-	unsigned int set, unsigned int clear);
+		unsigned int set, unsigned int clear);
 static void ti_break(struct tty_struct *tty, int break_state);
 static void ti_interrupt_callback(struct urb *urb);
 static void ti_bulk_in_callback(struct urb *urb);
@@ -327,19 +328,25 @@ module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
 
 module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "TTY low_latency flag, 0=off, 1=on, default is off");
+MODULE_PARM_DESC(low_latency,
+		"TTY low_latency flag, 0=off, 1=on, default is off");
 
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000");
+MODULE_PARM_DESC(closing_wait,
+    "Maximum wait for data to drain in close, in .01 secs, default is 4000");
 
 module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO);
-MODULE_PARM_DESC(vendor_3410, "Vendor ids for 3410 based devices, 1-5 short integers");
+MODULE_PARM_DESC(vendor_3410,
+		"Vendor ids for 3410 based devices, 1-5 short integers");
 module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO);
-MODULE_PARM_DESC(product_3410, "Product ids for 3410 based devices, 1-5 short integers");
+MODULE_PARM_DESC(product_3410,
+		"Product ids for 3410 based devices, 1-5 short integers");
 module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO);
-MODULE_PARM_DESC(vendor_5052, "Vendor ids for 5052 based devices, 1-5 short integers");
+MODULE_PARM_DESC(vendor_5052,
+		"Vendor ids for 5052 based devices, 1-5 short integers");
 module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO);
-MODULE_PARM_DESC(product_5052, "Product ids for 5052 based devices, 1-5 short integers");
+MODULE_PARM_DESC(product_5052,
+		"Product ids for 5052 based devices, 1-5 short integers");
 
 MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
 
@@ -348,18 +355,18 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
 
 static int __init ti_init(void)
 {
-	int i,j;
+	int i, j;
 	int ret;
 
 	/* insert extra vendor and product ids */
 	j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
-	for (i=0; i<min(vendor_3410_count,product_3410_count); i++,j++) {
+	for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++) {
 		ti_id_table_3410[j].idVendor = vendor_3410[i];
 		ti_id_table_3410[j].idProduct = product_3410[i];
 		ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 	}
 	j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
-	for (i=0; i<min(vendor_5052_count,product_5052_count); i++,j++) {
+	for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++) {
 		ti_id_table_5052[j].idVendor = vendor_5052[i];
 		ti_id_table_5052[j].idProduct = product_5052[i];
 		ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
@@ -428,7 +435,8 @@ static int ti_startup(struct usb_serial *serial)
 	/* determine device type */
 	if (usb_match_id(serial->interface, ti_id_table_3410))
 		tdev->td_is_3410 = 1;
-	dbg("%s - device type is %s", __func__, tdev->td_is_3410 ? "3410" : "5052");
+	dbg("%s - device type is %s", __func__,
+				tdev->td_is_3410 ? "3410" : "5052");
 
 	/* if we have only 1 configuration, download firmware */
 	if (dev->descriptor.bNumConfigurations == 1) {
@@ -447,7 +455,7 @@ static int ti_startup(struct usb_serial *serial)
 
 		status = -ENODEV;
 		goto free_tdev;
-	} 
+	}
 
 	/* the second configuration must be set (in sysfs by hotplug script) */
 	if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
@@ -464,7 +472,8 @@ static int ti_startup(struct usb_serial *serial)
 			goto free_tports;
 		}
 		spin_lock_init(&tport->tp_lock);
-		tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
+		tport->tp_uart_base_addr = (i == 0 ?
+				TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
 		tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
 		tport->tp_closing_wait = closing_wait;
 		init_waitqueue_head(&tport->tp_msr_wait);
@@ -481,11 +490,11 @@ static int ti_startup(struct usb_serial *serial)
 		usb_set_serial_port_data(serial->port[i], tport);
 		tport->tp_uart_mode = 0;	/* default is RS232 */
 	}
-	
+
 	return 0;
 
 free_tports:
-	for (--i; i>=0; --i) {
+	for (--i; i >= 0; --i) {
 		tport = usb_get_serial_port_data(serial->port[i]);
 		ti_buf_free(tport->tp_write_buf);
 		kfree(tport);
@@ -506,7 +515,7 @@ static void ti_shutdown(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	for (i=0; i < serial->num_ports; ++i) {
+	for (i = 0; i < serial->num_ports; ++i) {
 		tport = usb_get_serial_port_data(serial->port[i]);
 		if (tport) {
 			ti_buf_free(tport->tp_write_buf);
@@ -529,8 +538,8 @@ static int ti_open(struct tty_struct *tty,
 	struct urb *urb;
 	int port_number;
 	int status;
-	__u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS | 
-			     TI_PIPE_TIMEOUT_ENABLE | 
+	__u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS |
+			     TI_PIPE_TIMEOUT_ENABLE |
 			     (TI_TRANSFER_TIMEOUT << 2));
 
 	dbg("%s - port %d", __func__, port->number);
@@ -561,7 +570,8 @@ static int ti_open(struct tty_struct *tty,
 		dbg("%s - start interrupt in urb", __func__);
 		urb = tdev->td_serial->port[0]->interrupt_in_urb;
 		if (!urb) {
-			dev_err(&port->dev, "%s - no interrupt urb\n", __func__);
+			dev_err(&port->dev, "%s - no interrupt urb\n",
+								__func__);
 			status = -EINVAL;
 			goto release_lock;
 		}
@@ -570,7 +580,9 @@ static int ti_open(struct tty_struct *tty,
 		urb->dev = dev;
 		status = usb_submit_urb(urb, GFP_KERNEL);
 		if (status) {
-			dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status);
+			dev_err(&port->dev,
+				"%s - submit interrupt urb failed, %d\n",
+					__func__, status);
 			goto release_lock;
 		}
 	}
@@ -582,7 +594,8 @@ static int ti_open(struct tty_struct *tty,
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 		(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 	if (status) {
-		dev_err(&port->dev, "%s - cannot send open command, %d\n", __func__, status);
+		dev_err(&port->dev, "%s - cannot send open command, %d\n",
+							__func__, status);
 		goto unlink_int_urb;
 	}
 
@@ -590,7 +603,8 @@ static int ti_open(struct tty_struct *tty,
 	status = ti_command_out_sync(tdev, TI_START_PORT,
 		(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 	if (status) {
-		dev_err(&port->dev, "%s - cannot send start command, %d\n", __func__, status);
+		dev_err(&port->dev, "%s - cannot send start command, %d\n",
+							__func__, status);
 		goto unlink_int_urb;
 	}
 
@@ -598,13 +612,15 @@ static int ti_open(struct tty_struct *tty,
 	status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 		(__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
 	if (status) {
-		dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __func__, status);
+		dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
+							__func__, status);
 		goto unlink_int_urb;
 	}
 	status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 		(__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
 	if (status) {
-		dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __func__, status);
+		dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
+							__func__, status);
 		goto unlink_int_urb;
 	}
 
@@ -620,7 +636,8 @@ static int ti_open(struct tty_struct *tty,
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 		(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 	if (status) {
-		dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __func__, status);
+		dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
+							__func__, status);
 		goto unlink_int_urb;
 	}
 
@@ -628,7 +645,8 @@ static int ti_open(struct tty_struct *tty,
 	status = ti_command_out_sync(tdev, TI_START_PORT,
 		(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 	if (status) {
-		dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __func__, status);
+		dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
+							__func__, status);
 		goto unlink_int_urb;
 	}
 
@@ -646,7 +664,8 @@ static int ti_open(struct tty_struct *tty,
 	urb->dev = dev;
 	status = usb_submit_urb(urb, GFP_KERNEL);
 	if (status) {
-		dev_err(&port->dev, "%s - submit read urb failed, %d\n", __func__, status);
+		dev_err(&port->dev, "%s - submit read urb failed, %d\n",
+							__func__, status);
 		goto unlink_int_urb;
 	}
 
@@ -675,7 +694,7 @@ static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
 	int do_unlock;
 
 	dbg("%s - port %d", __func__, port->number);
-			 
+
 	tdev = usb_get_serial_data(port->serial);
 	tport = usb_get_serial_port_data(port);
 	if (tdev == NULL || tport == NULL)
@@ -695,7 +714,9 @@ static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
 	status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
 		     (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 	if (status)
-		dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __func__, status);
+		dev_err(&port->dev,
+			"%s - cannot send close port command, %d\n"
+							, __func__, status);
 
 	/* if mutex_lock is interrupted, continue anyway */
 	do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock);
@@ -749,7 +770,7 @@ static int ti_write_room(struct tty_struct *tty)
 
 	if (tport == NULL)
 		return -ENODEV;
-	
+
 	spin_lock_irqsave(&tport->tp_lock, flags);
 	room = ti_buf_space_avail(tport->tp_write_buf);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
@@ -810,7 +831,8 @@ static void ti_unthrottle(struct tty_struct *tty)
 	if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
 		status = ti_restart_read(tport, tty);
 		if (status)
-			dev_err(&port->dev, "%s - cannot restart read, %d\n", __func__, status);
+			dev_err(&port->dev, "%s - cannot restart read, %d\n",
+							__func__, status);
 	}
 }
 
@@ -829,44 +851,42 @@ static int ti_ioctl(struct tty_struct *tty, struct file *file,
 		return -ENODEV;
 
 	switch (cmd) {
-		case TIOCGSERIAL:
-			dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
-			return ti_get_serial_info(tport, (struct serial_struct __user *)arg);
-			break;
-
-		case TIOCSSERIAL:
-			dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
-			return ti_set_serial_info(tport, (struct serial_struct __user *)arg);
-			break;
-
-		case TIOCMIWAIT:
-			dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
-			cprev = tport->tp_icount;
-			while (1) {
-				interruptible_sleep_on(&tport->tp_msr_wait);
-				if (signal_pending(current))
-					return -ERESTARTSYS;
-				cnow = tport->tp_icount;
-				if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-				    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-					return -EIO; /* no change => error */
-				if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-				    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-				    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-				    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
-					return 0;
-				}
-				cprev = cnow;
-			}
-			break;
-
-		case TIOCGICOUNT:
-			dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, tport->tp_icount.rx, tport->tp_icount.tx);
-			if (copy_to_user((void __user *)arg, &tport->tp_icount, sizeof(tport->tp_icount)))
-				return -EFAULT;
-			return 0;
+	case TIOCGSERIAL:
+		dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
+		return ti_get_serial_info(tport,
+				(struct serial_struct __user *)arg);
+	case TIOCSSERIAL:
+		dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
+		return ti_set_serial_info(tport,
+					(struct serial_struct __user *)arg);
+	case TIOCMIWAIT:
+		dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
+		cprev = tport->tp_icount;
+		while (1) {
+			interruptible_sleep_on(&tport->tp_msr_wait);
+			if (signal_pending(current))
+				return -ERESTARTSYS;
+			cnow = tport->tp_icount;
+			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+				return -EIO; /* no change => error */
+			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
+			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)))
+				return 0;
+			cprev = cnow;
+		}
+		break;
+	case TIOCGICOUNT:
+		dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
+				__func__, port->number,
+				tport->tp_icount.rx, tport->tp_icount.tx);
+		if (copy_to_user((void __user *)arg, &tport->tp_icount,
+					sizeof(tport->tp_icount)))
+			return -EFAULT;
+		return 0;
 	}
-
 	return -ENOIOCTLCMD;
 }
 
@@ -876,7 +896,7 @@ static void ti_set_termios(struct tty_struct *tty,
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct ti_uart_config *config;
-	tcflag_t cflag,iflag;
+	tcflag_t cflag, iflag;
 	int baud;
 	int status;
 	int port_number = port->number - port->serial->minor;
@@ -888,7 +908,8 @@ static void ti_set_termios(struct tty_struct *tty,
 	iflag = tty->termios->c_iflag;
 
 	dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
-	dbg("%s - old clfag %08x, old iflag %08x", __func__, old_termios->c_cflag, old_termios->c_iflag);
+	dbg("%s - old clfag %08x, old iflag %08x", __func__,
+				old_termios->c_cflag, old_termios->c_iflag);
 
 	if (tport == NULL)
 		return;
@@ -907,19 +928,19 @@ static void ti_set_termios(struct tty_struct *tty,
 	config->bUartMode = (__u8)(tport->tp_uart_mode);
 
 	switch (cflag & CSIZE) {
-		case CS5:
-			    config->bDataBits = TI_UART_5_DATA_BITS;
-			    break;
-		case CS6:
-			    config->bDataBits = TI_UART_6_DATA_BITS;
-			    break;
-		case CS7:
-			    config->bDataBits = TI_UART_7_DATA_BITS;
-			    break;
-		default:
-		case CS8:
-			    config->bDataBits = TI_UART_8_DATA_BITS;
-			    break;
+	case CS5:
+		    config->bDataBits = TI_UART_5_DATA_BITS;
+		    break;
+	case CS6:
+		    config->bDataBits = TI_UART_6_DATA_BITS;
+		    break;
+	case CS7:
+		    config->bDataBits = TI_UART_7_DATA_BITS;
+		    break;
+	default:
+	case CS8:
+		    config->bDataBits = TI_UART_8_DATA_BITS;
+		    break;
 	}
 
 	/* CMSPAR isn't supported by this driver */
@@ -935,7 +956,7 @@ static void ti_set_termios(struct tty_struct *tty,
 		}
 	} else {
 		config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING;
-		config->bParity = TI_UART_NO_PARITY; 	
+		config->bParity = TI_UART_NO_PARITY;
 	}
 
 	if (cflag & CSTOPB)
@@ -988,7 +1009,8 @@ static void ti_set_termios(struct tty_struct *tty,
 		(__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
 		sizeof(*config));
 	if (status)
-		dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __func__, port_number, status);
+		dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
+					__func__, port_number, status);
 
 	/* SET_CONFIG asserts RTS and DTR, reset them correctly */
 	mcr = tport->tp_shadow_mcr;
@@ -997,7 +1019,9 @@ static void ti_set_termios(struct tty_struct *tty,
 		mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
 	status = ti_set_mcr(tport, mcr);
 	if (status)
-		dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __func__, port_number, status);
+		dev_err(&port->dev,
+			"%s - cannot set modem control on port %d, %d\n",
+						__func__, port_number, status);
 
 	kfree(config);
 }
@@ -1139,10 +1163,12 @@ static void ti_interrupt_callback(struct urb *urb)
 	port_number = TI_GET_PORT_FROM_CODE(data[0]);
 	function = TI_GET_FUNC_FROM_CODE(data[0]);
 
-	dbg("%s - port_number %d, function %d, data 0x%02X", __func__, port_number, function, data[1]);
+	dbg("%s - port_number %d, function %d, data 0x%02X",
+				__func__, port_number, function, data[1]);
 
 	if (port_number >= serial->num_ports) {
-		dev_err(dev, "%s - bad port number, %d\n", __func__, port_number);
+		dev_err(dev, "%s - bad port number, %d\n",
+						__func__, port_number);
 		goto exit;
 	}
 
@@ -1154,7 +1180,8 @@ static void ti_interrupt_callback(struct urb *urb)
 
 	switch (function) {
 	case TI_CODE_DATA_ERROR:
-		dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __func__, port_number, data[1]);
+		dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
+					__func__, port_number, data[1]);
 		break;
 
 	case TI_CODE_MODEM_STATUS:
@@ -1164,7 +1191,8 @@ static void ti_interrupt_callback(struct urb *urb)
 		break;
 
 	default:
-		dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __func__, data[1]);
+		dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
+							__func__, data[1]);
 		break;
 	}
 
@@ -1198,7 +1226,7 @@ static void ti_bulk_in_callback(struct urb *urb)
 		return;
 	default:
 		dev_err(dev, "%s - nonzero urb status, %d\n",
-			__func__, status );
+			__func__, status);
 		tport->tp_tdev->td_urb_error = 1;
 		wake_up_interruptible(&tport->tp_write_wait);
 	}
@@ -1218,8 +1246,9 @@ static void ti_bulk_in_callback(struct urb *urb)
 		if (!tport->tp_is_open)
 			dbg("%s - port closed, dropping data", __func__);
 		else
-			ti_recv(&urb->dev->dev, port->port.tty, urb->transfer_buffer,
-				urb->actual_length);
+			ti_recv(&urb->dev->dev, port->port.tty,
+						urb->transfer_buffer,
+						urb->actual_length);
 
 		spin_lock(&tport->tp_lock);
 		tport->tp_icount.rx += urb->actual_length;
@@ -1283,8 +1312,9 @@ static void ti_recv(struct device *dev, struct tty_struct *tty,
 	do {
 		cnt = tty_buffer_request_room(tty, length);
 		if (cnt < length) {
-			dev_err(dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt);
-			if(cnt == 0)
+			dev_err(dev, "%s - dropping data, %d bytes lost\n",
+						__func__, length - cnt);
+			if (cnt == 0)
 				break;
 		}
 		tty_insert_flip_string(tty, data, cnt);
@@ -1326,7 +1356,8 @@ static void ti_send(struct ti_port *tport)
 
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
-	usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
+	usb_serial_debug_data(debug, &port->dev, __func__, count,
+					port->write_urb->transfer_buffer);
 
 	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 			   usb_sndbulkpipe(port->serial->dev,
@@ -1336,8 +1367,9 @@ static void ti_send(struct ti_port *tport)
 
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - submit write urb failed, %d\n", __func__, result);
-		tport->tp_write_urb_in_use = 0; 
+		dev_err(&port->dev, "%s - submit write urb failed, %d\n",
+							__func__, result);
+		tport->tp_write_urb_in_use = 0;
 		/* TODO: reschedule ti_send */
 	} else {
 		spin_lock_irqsave(&tport->tp_lock, flags);
@@ -1372,7 +1404,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
 
 static int ti_get_lsr(struct ti_port *tport)
 {
-	int size,status;
+	int size, status;
 	struct ti_device *tdev = tport->tp_tdev;
 	struct usb_serial_port *port = tport->tp_port;
 	int port_number = port->number - port->serial->minor;
@@ -1390,7 +1422,9 @@ static int ti_get_lsr(struct ti_port *tport)
 	status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
 		(__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
 	if (status) {
-		dev_err(&port->dev, "%s - get port status command failed, %d\n", __func__, status);
+		dev_err(&port->dev,
+			"%s - get port status command failed, %d\n",
+							__func__, status);
 		goto free_data;
 	}
 
@@ -1626,7 +1660,8 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 	struct ti_write_data_bytes *data;
 	struct device *dev = &tdev->td_serial->dev->dev;
 
-	dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __func__, addr, mask, byte);
+	dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X",
+					__func__, addr, mask, byte);
 
 	size = sizeof(struct ti_write_data_bytes) + 2;
 	data = kmalloc(size, GFP_KERNEL);
@@ -1663,12 +1698,12 @@ static int ti_do_download(struct usb_device *dev, int pipe,
 	struct ti_firmware_header *header;
 	int status;
 	int len;
-	
-	for(pos = sizeof(struct ti_firmware_header); pos < size; pos++)
+
+	for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
 		cs = (__u8)(cs + buffer[pos]);
 
 	header = (struct ti_firmware_header *)buffer;
-	header->wLength = cpu_to_le16((__u16)(size 
+	header->wLength = cpu_to_le16((__u16)(size
 					- sizeof(struct ti_firmware_header)));
 	header->bCheckSum = cs;
 
@@ -1714,7 +1749,8 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
 	}
 	release_firmware(fw_p);
 	if (status) {
-		dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __func__, status);
+		dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
+							__func__, status);
 		return status;
 	}
 
@@ -1786,7 +1822,7 @@ static void ti_buf_clear(struct circ_buf *cb)
 
 static int ti_buf_data_avail(struct circ_buf *cb)
 {
-	return CIRC_CNT(cb->head,cb->tail,TI_WRITE_BUF_SIZE);
+	return CIRC_CNT(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
 }
 
 
@@ -1799,7 +1835,7 @@ static int ti_buf_data_avail(struct circ_buf *cb)
 
 static int ti_buf_space_avail(struct circ_buf *cb)
 {
-	return CIRC_SPACE(cb->head,cb->tail,TI_WRITE_BUF_SIZE);
+	return CIRC_SPACE(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
 }
 
 
-- 
cgit v1.2.3


From 43c8f435b2ca39f12ad89d91d9ee2be04a196f93 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:15:26 +0100
Subject: tty-usb-safe-serial: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/safe_serial.c | 290 +++++++++++++++++++++------------------
 1 file changed, 157 insertions(+), 133 deletions(-)

diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index f823e4dcea1..def52d07a4e 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -13,24 +13,25 @@
  *      Stuart Lynne <sl@lineo.com>, Tom Rushworth <tbr@lineo.com>
  */
 
-/* 
- * The encapsultaion is designed to overcome difficulties with some USB hardware.
+/*
+ * The encapsultaion is designed to overcome difficulties with some USB
+ * hardware.
  *
  * While the USB protocol has a CRC over the data while in transit, i.e. while
- * being carried over the bus, there is no end to end protection. If the hardware
- * has any problems getting the data into or out of the USB transmit and receive
- * FIFO's then data can be lost. 
+ * being carried over the bus, there is no end to end protection. If the
+ * hardware has any problems getting the data into or out of the USB transmit
+ * and receive FIFO's then data can be lost.
  *
- * This protocol adds a two byte trailer to each USB packet to specify the number
- * of bytes of valid data and a 10 bit CRC that will allow the receiver to verify
- * that the entire USB packet was received without error.
+ * This protocol adds a two byte trailer to each USB packet to specify the
+ * number of bytes of valid data and a 10 bit CRC that will allow the receiver
+ * to verify that the entire USB packet was received without error.
  *
- * Because in this case the sender and receiver are the class and function drivers
- * there is now end to end protection.
+ * Because in this case the sender and receiver are the class and function
+ * drivers there is now end to end protection.
  *
- * There is an additional option that can be used to force all transmitted packets
- * to be padded to the maximum packet size. This provides a work around for some
- * devices which have problems with small USB packets.
+ * There is an additional option that can be used to force all transmitted
+ * packets to be padded to the maximum packet size. This provides a work
+ * around for some devices which have problems with small USB packets.
  *
  * Assuming a packetsize of N:
  *
@@ -44,11 +45,12 @@
  *      | Data Length       | 10 bit CRC                                |
  *      + 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 | 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 +
  *
- * The 10 bit CRC is computed across the sent data, followed by the trailer with
- * the length set and the CRC set to zero. The CRC is then OR'd into the trailer.
+ * The 10 bit CRC is computed across the sent data, followed by the trailer
+ * with the length set and the CRC set to zero. The CRC is then OR'd into
+ * the trailer.
  *
- * When received a 10 bit CRC is computed over the entire frame including the trailer
- * and should be equal to zero.
+ * When received a 10 bit CRC is computed over the entire frame including
+ * the trailer and should be equal to zero.
  *
  * Two module parameters are used to control the encapsulation, if both are
  * turned of the module works as a simple serial device with NO
@@ -69,7 +71,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -86,12 +88,12 @@ static int padded = CONFIG_USB_SERIAL_SAFE_PADDED;
 #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com"
 #define DRIVER_DESC "USB Safe Encapsulated Serial"
 
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-static __u16 vendor;		// no default
-static __u16 product;		// no default
+static __u16 vendor;		/* no default */
+static __u16 product;		/* no default */
 module_param(vendor, ushort, 0);
 MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)");
 module_param(product, ushort, 0);
@@ -122,30 +124,31 @@ MODULE_PARM_DESC(padded, "Pad to full wMaxPacketSize On/Off");
 #define LINEO_SAFESERIAL_CRC_PADDED             0x02
 
 
-#define MY_USB_DEVICE(vend,prod,dc,ic,isc) \
-        .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS | \
-                USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
-        .idVendor = (vend), \
-        .idProduct = (prod),\
-        .bDeviceClass = (dc),\
-        .bInterfaceClass = (ic), \
-        .bInterfaceSubClass = (isc),
+#define MY_USB_DEVICE(vend, prod, dc, ic, isc) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_DEV_CLASS | \
+		       USB_DEVICE_ID_MATCH_INT_CLASS | \
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
+	.idVendor = (vend), \
+	.idProduct = (prod),\
+	.bDeviceClass = (dc),\
+	.bInterfaceClass = (ic), \
+	.bInterfaceSubClass = (isc),
 
 static struct usb_device_id id_table[] = {
-	{MY_USB_DEVICE (0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	// Itsy
-	{MY_USB_DEVICE (0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	// Calypso
-	{MY_USB_DEVICE (0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	// Iris 
-	{MY_USB_DEVICE (0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	// Collie 
-	{MY_USB_DEVICE (0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	// Collie 
-	{MY_USB_DEVICE (0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	// Collie 
-	{MY_USB_DEVICE (0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	// Sharp tmp
-	// extra null entry for module 
-	// vendor/produc parameters
-	{MY_USB_DEVICE (0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
-	{}			// terminating entry 
+	{MY_USB_DEVICE(0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Itsy */
+	{MY_USB_DEVICE(0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Calypso */
+	{MY_USB_DEVICE(0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Iris */
+	{MY_USB_DEVICE(0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
+	{MY_USB_DEVICE(0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
+	{MY_USB_DEVICE(0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
+	{MY_USB_DEVICE(0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Sharp tmp */
+	/* extra null entry for module vendor/produc parameters */
+	{MY_USB_DEVICE(0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
+	{}			/* terminating entry  */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver safe_driver = {
 	.name =		"safe_serial",
@@ -156,29 +159,45 @@ static struct usb_driver safe_driver = {
 };
 
 static const __u16 crc10_table[256] = {
-	0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff, 0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
-	0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce, 0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf,
-	0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d, 0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c,
-	0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac, 0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad,
-	0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b, 0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a,
-	0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a, 0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b,
-	0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259, 0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158,
-	0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268, 0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169,
-	0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377, 0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076,
-	0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346, 0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047,
-	0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315, 0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014,
-	0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324, 0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025,
-	0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3, 0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2,
-	0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382, 0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083,
-	0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1, 0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0,
-	0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0, 0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1,
+	0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff,
+	0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
+	0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce,
+	0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf,
+	0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d,
+	0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c,
+	0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac,
+	0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad,
+	0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b,
+	0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a,
+	0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a,
+	0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b,
+	0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259,
+	0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158,
+	0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268,
+	0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169,
+	0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377,
+	0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076,
+	0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346,
+	0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047,
+	0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315,
+	0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014,
+	0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324,
+	0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025,
+	0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3,
+	0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2,
+	0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382,
+	0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083,
+	0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1,
+	0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0,
+	0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0,
+	0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1,
 };
 
-#define CRC10_INITFCS     0x000	// Initial FCS value
-#define CRC10_GOODFCS     0x000	// Good final FCS value
-#define CRC10_FCS(fcs, c) ( (((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c))
+#define CRC10_INITFCS     0x000	/* Initial FCS value */
+#define CRC10_GOODFCS     0x000	/* Good final FCS value */
+#define CRC10_FCS(fcs, c) ((((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c))
 
-/**     
+/**
  * fcs_compute10 - memcpy and calculate 10 bit CRC across buffer
  * @sp: pointer to buffer
  * @len: number of bytes
@@ -187,13 +206,13 @@ static const __u16 crc10_table[256] = {
  * Perform a memcpy and calculate fcs using ppp 10bit CRC algorithm. Return
  * new 10 bit FCS.
  */
-static __u16 __inline__ fcs_compute10 (unsigned char *sp, int len, __u16 fcs)
+static __u16 __inline__ fcs_compute10(unsigned char *sp, int len, __u16 fcs)
 {
-	for (; len-- > 0; fcs = CRC10_FCS (fcs, *sp++));
+	for (; len-- > 0; fcs = CRC10_FCS(fcs, *sp++));
 	return fcs;
 }
 
-static void safe_read_bulk_callback (struct urb *urb)
+static void safe_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port =  urb->context;
 	unsigned char *data = urb->transfer_buffer;
@@ -201,7 +220,7 @@ static void safe_read_bulk_callback (struct urb *urb)
 	int result;
 	int status = urb->status;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	if (status) {
 		dbg("%s - nonzero read bulk status received: %d",
@@ -209,50 +228,55 @@ static void safe_read_bulk_callback (struct urb *urb)
 		return;
 	}
 
-	dbg ("safe_read_bulk_callback length: %d", port->read_urb->actual_length);
+	dbg("safe_read_bulk_callback length: %d",
+					port->read_urb->actual_length);
 #ifdef ECHO_RCV
 	{
 		int i;
 		unsigned char *cp = port->read_urb->transfer_buffer;
 		for (i = 0; i < port->read_urb->actual_length; i++) {
-			if ((i % 32) == 0) {
-				printk ("\nru[%02x] ", i);
-			}
-			printk ("%02x ", *cp++);
+			if ((i % 32) == 0)
+				printk("\nru[%02x] ", i);
+			printk("%02x ", *cp++);
 		}
-		printk ("\n");
+		printk("\n");
 	}
 #endif
 	if (safe) {
 		__u16 fcs;
-		if (!(fcs = fcs_compute10 (data, length, CRC10_INITFCS))) {
+		fcs = fcs_compute10(data, length, CRC10_INITFCS);
+		if (!fcs) {
 			int actual_length = data[length - 2] >> 2;
 			if (actual_length <= (length - 2)) {
-				info ("%s - actual: %d", __func__, actual_length);
-				tty_insert_flip_string(port->port.tty, data, actual_length);
-				tty_flip_buffer_push (port->port.tty);
+				info("%s - actual: %d", __func__,
+							actual_length);
+				tty_insert_flip_string(port->port.tty,
+							data, actual_length);
+				tty_flip_buffer_push(port->port.tty);
 			} else {
-				err ("%s - inconsistent lengths %d:%d", __func__,
-				     actual_length, length);
+				err("%s - inconsistent lengths %d:%d",
+					__func__, actual_length, length);
 			}
 		} else {
-			err ("%s - bad CRC %x", __func__, fcs);
+			err("%s - bad CRC %x", __func__, fcs);
 		}
 	} else {
 		tty_insert_flip_string(port->port.tty, data, length);
-		tty_flip_buffer_push (port->port.tty);
+		tty_flip_buffer_push(port->port.tty);
 	}
 
 	/* Continue trying to always read  */
-	usb_fill_bulk_urb (urb, port->serial->dev,
-		       usb_rcvbulkpipe (port->serial->dev, port->bulk_in_endpointAddress),
-		       urb->transfer_buffer, urb->transfer_buffer_length,
-		       safe_read_bulk_callback, port);
-
-	if ((result = usb_submit_urb (urb, GFP_ATOMIC))) {
-		err ("%s - failed resubmitting read urb, error %d", __func__, result);
+	usb_fill_bulk_urb(urb, port->serial->dev,
+			usb_rcvbulkpipe(port->serial->dev,
+					port->bulk_in_endpointAddress),
+			urb->transfer_buffer, urb->transfer_buffer_length,
+			safe_read_bulk_callback, port);
+
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		err("%s - failed resubmitting read urb, error %d",
+							__func__, result);
 		/* FIXME: Need a mechanism to retry later if this happens */
-	}
 }
 
 static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -263,23 +287,23 @@ static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
 	int i;
 	int packet_length;
 
-	dbg ("safe_write port: %p %d urb: %p count: %d", port, port->number, port->write_urb,
-	     count);
+	dbg("safe_write port: %p %d urb: %p count: %d",
+				port, port->number, port->write_urb, count);
 
 	if (!port->write_urb) {
-		dbg ("%s - write urb NULL", __func__);
+		dbg("%s - write urb NULL", __func__);
 		return 0;
 	}
 
-	dbg ("safe_write write_urb: %d transfer_buffer_length",
+	dbg("safe_write write_urb: %d transfer_buffer_length",
 	     port->write_urb->transfer_buffer_length);
 
 	if (!port->write_urb->transfer_buffer_length) {
-		dbg ("%s - write urb transfer_buffer_length zero", __func__);
+		dbg("%s - write urb transfer_buffer_length zero", __func__);
 		return 0;
 	}
 	if (count == 0) {
-		dbg ("%s - write request of 0 bytes", __func__);
+		dbg("%s - write request of 0 bytes", __func__);
 		return 0;
 	}
 	spin_lock_bh(&port->lock);
@@ -291,63 +315,64 @@ static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
 	port->write_urb_busy = 1;
 	spin_unlock_bh(&port->lock);
 
-	packet_length = port->bulk_out_size;	// get max packetsize
+	packet_length = port->bulk_out_size;	/* get max packetsize */
 
-	i = packet_length - (safe ? 2 : 0);	// get bytes to send
+	i = packet_length - (safe ? 2 : 0);	/* get bytes to send */
 	count = (count > i) ? i : count;
 
 
-	// get the data into the transfer buffer
+	/* get the data into the transfer buffer */
 	data = port->write_urb->transfer_buffer;
-	memset (data, '0', packet_length);
+	memset(data, '0', packet_length);
 
-	memcpy (data, buf, count);
+	memcpy(data, buf, count);
 
 	if (safe) {
 		__u16 fcs;
 
-		// pad if necessary
-		if (!padded) {
+		/* pad if necessary */
+		if (!padded)
 			packet_length = count + 2;
-		}
-		// set count
+		/* set count */
 		data[packet_length - 2] = count << 2;
 		data[packet_length - 1] = 0;
 
-		// compute fcs and insert into trailer
-		fcs = fcs_compute10 (data, packet_length, CRC10_INITFCS);
+		/* compute fcs and insert into trailer */
+		fcs = fcs_compute10(data, packet_length, CRC10_INITFCS);
 		data[packet_length - 2] |= fcs >> 8;
 		data[packet_length - 1] |= fcs & 0xff;
 
-		// set length to send
+		/* set length to send */
 		port->write_urb->transfer_buffer_length = packet_length;
 	} else {
 		port->write_urb->transfer_buffer_length = count;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
+	usb_serial_debug_data(debug, &port->dev, __func__, count,
+					port->write_urb->transfer_buffer);
 #ifdef ECHO_TX
 	{
 		int i;
 		unsigned char *cp = port->write_urb->transfer_buffer;
 		for (i = 0; i < port->write_urb->transfer_buffer_length; i++) {
-			if ((i % 32) == 0) {
-				printk ("\nsu[%02x] ", i);
-			}
-			printk ("%02x ", *cp++);
+			if ((i % 32) == 0)
+				printk("\nsu[%02x] ", i);
+			printk("%02x ", *cp++);
 		}
-		printk ("\n");
+		printk("\n");
 	}
 #endif
 	port->write_urb->dev = port->serial->dev;
-	if ((result = usb_submit_urb (port->write_urb, GFP_KERNEL))) {
+	result = usb_submit_urb(port->write_urb, GFP_KERNEL);
+	if (result) {
 		port->write_urb_busy = 0;
-		err ("%s - failed submitting write urb, error %d", __func__, result);
+		err("%s - failed submitting write urb, error %d",
+							__func__, result);
 		return 0;
 	}
-	dbg ("%s urb: %p submitted", __func__, port->write_urb);
+	dbg("%s urb: %p submitted", __func__, port->write_urb);
 
-	return (count);
+	return count;
 }
 
 static int safe_write_room(struct tty_struct *tty)
@@ -356,21 +381,19 @@ static int safe_write_room(struct tty_struct *tty)
 	int room = 0;		/* Default: no room */
 	unsigned long flags;
 
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	spin_lock_irqsave(&port->lock, flags);
 	if (port->write_urb_busy)
 		room = port->bulk_out_size - (safe ? 2 : 0);
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	if (room) {
-		dbg ("safe_write_room returns %d", room);
-	}
-
+	if (room)
+		dbg("safe_write_room returns %d", room);
 	return room;
 }
 
-static int safe_startup (struct usb_serial *serial)
+static int safe_startup(struct usb_serial *serial)
 {
 	switch (serial->interface->cur_altsetting->desc.bInterfaceProtocol) {
 	case LINEO_SAFESERIAL_CRC:
@@ -398,17 +421,18 @@ static struct usb_serial_driver safe_device = {
 	.attach =		safe_startup,
 };
 
-static int __init safe_init (void)
+static int __init safe_init(void)
 {
 	int i, retval;
 
-	info (DRIVER_VERSION " " DRIVER_AUTHOR);
-	info (DRIVER_DESC);
-	info ("vendor: %x product: %x safe: %d padded: %d\n", vendor, product, safe, padded);
+	info(DRIVER_VERSION " " DRIVER_AUTHOR);
+	info(DRIVER_DESC);
+	info("vendor: %x product: %x safe: %d padded: %d\n",
+					vendor, product, safe, padded);
 
-	// if we have vendor / product parameters patch them into id list
+	/* if we have vendor / product parameters patch them into id list */
 	if (vendor || product) {
-		info ("vendor: %x product: %x\n", vendor, product);
+		info("vendor: %x product: %x\n", vendor, product);
 
 		for (i = 0; i < ARRAY_SIZE(id_table); i++) {
 			if (!id_table[i].idVendor && !id_table[i].idProduct) {
@@ -433,11 +457,11 @@ failed_usb_serial_register:
 	return retval;
 }
 
-static void __exit safe_exit (void)
+static void __exit safe_exit(void)
 {
-	usb_deregister (&safe_driver);
-	usb_serial_deregister (&safe_device);
+	usb_deregister(&safe_driver);
+	usb_serial_deregister(&safe_device);
 }
 
-module_init (safe_init);
-module_exit (safe_exit);
+module_init(safe_init);
+module_exit(safe_exit);
-- 
cgit v1.2.3


From 2a77c8144992e21367cc15956b0ff295f1112c85 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:15:36 +0100
Subject: tty-usb-oti6858: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/oti6858.c | 136 ++++++++++++++++++++++---------------------
 1 file changed, 70 insertions(+), 66 deletions(-)

diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 069d276a527..81db5715ee2 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -25,7 +25,8 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  * TODO:
  *  - implement correct flushing for ioctls and oti6858_close()
@@ -49,7 +50,7 @@
 #include <linux/spinlock.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include "oti6858.h"
 
 #define OTI6858_DESCRIPTION \
@@ -135,9 +136,9 @@ struct oti6858_control_pkt {
 
 #define OTI6858_CTRL_PKT_SIZE	sizeof(struct oti6858_control_pkt)
 #define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
-	(    ((a)->divisor == (priv)->pending_setup.divisor) \
+	(((a)->divisor == (priv)->pending_setup.divisor) \
 	  && ((a)->control == (priv)->pending_setup.control) \
-	  && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt) )
+	  && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
 
 /* function prototypes */
 static int oti6858_open(struct tty_struct *tty,
@@ -220,7 +221,7 @@ struct oti6858_private {
 	struct delayed_work delayed_setup_work;
 
 	wait_queue_head_t intr_wait;
-        struct usb_serial_port *port;   /* USB port with which associated */
+	struct usb_serial_port *port;   /* USB port with which associated */
 };
 
 #undef dbg
@@ -229,7 +230,8 @@ struct oti6858_private {
 
 static void setup_line(struct work_struct *work)
 {
-	struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_setup_work.work);
+	struct oti6858_private *priv = container_of(work,
+			struct oti6858_private, delayed_setup_work.work);
 	struct usb_serial_port *port = priv->port;
 	struct oti6858_control_pkt *new_setup;
 	unsigned long flags;
@@ -237,10 +239,12 @@ static void setup_line(struct work_struct *work)
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	if ((new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
+	new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
+	if (new_setup == NULL) {
 		dev_err(&port->dev, "%s(): out of memory!\n", __func__);
 		/* we will try again */
-		schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
+		schedule_delayed_work(&priv->delayed_setup_work,
+						msecs_to_jiffies(2));
 		return;
 	}
 
@@ -256,7 +260,8 @@ static void setup_line(struct work_struct *work)
 		dev_err(&port->dev, "%s(): error reading status\n", __func__);
 		kfree(new_setup);
 		/* we will try again */
-		schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
+		schedule_delayed_work(&priv->delayed_setup_work,
+							msecs_to_jiffies(2));
 		return;
 	}
 
@@ -297,7 +302,8 @@ static void setup_line(struct work_struct *work)
 
 void send_data(struct work_struct *work)
 {
-	struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_write_work.work);
+	struct oti6858_private *priv = container_of(work,
+			struct oti6858_private, delayed_write_work.work);
 	struct usb_serial_port *port = priv->port;
 	int count = 0, result;
 	unsigned long flags;
@@ -308,7 +314,8 @@ void send_data(struct work_struct *work)
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->flags.write_urb_in_use) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		schedule_delayed_work(&priv->delayed_write_work, msecs_to_jiffies(2));
+		schedule_delayed_work(&priv->delayed_write_work,
+						msecs_to_jiffies(2));
 		return;
 	}
 	priv->flags.write_urb_in_use = 1;
@@ -359,8 +366,8 @@ void send_data(struct work_struct *work)
 
 static int oti6858_startup(struct usb_serial *serial)
 {
-        struct usb_serial_port *port = serial->port[0];
-        struct oti6858_private *priv;
+	struct usb_serial_port *port = serial->port[0];
+	struct oti6858_private *priv;
 	int i;
 
 	for (i = 0; i < serial->num_ports; ++i) {
@@ -375,8 +382,8 @@ static int oti6858_startup(struct usb_serial *serial)
 
 		spin_lock_init(&priv->lock);
 		init_waitqueue_head(&priv->intr_wait);
-//		INIT_WORK(&priv->setup_work, setup_line, serial->port[i]);
-//		INIT_WORK(&priv->write_work, send_data, serial->port[i]);
+/*		INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */
+/*		INIT_WORK(&priv->write_work, send_data, serial->port[i]); */
 		priv->port = port;
 		INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
 		INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
@@ -482,19 +489,19 @@ static void oti6858_set_termios(struct tty_struct *tty,
 
 	frame_fmt &= ~FMT_DATA_BITS_MASK;
 	switch (cflag & CSIZE) {
-		case CS5:
-			frame_fmt |= FMT_DATA_BITS_5;
-			break;
-		case CS6:
-			frame_fmt |= FMT_DATA_BITS_6;
-			break;
-		case CS7:
-			frame_fmt |= FMT_DATA_BITS_7;
-			break;
-		default:
-		case CS8:
-			frame_fmt |= FMT_DATA_BITS_8;
-			break;
+	case CS5:
+		frame_fmt |= FMT_DATA_BITS_5;
+		break;
+	case CS6:
+		frame_fmt |= FMT_DATA_BITS_6;
+		break;
+	case CS7:
+		frame_fmt |= FMT_DATA_BITS_7;
+		break;
+	default:
+	case CS8:
+		frame_fmt |= FMT_DATA_BITS_8;
+		break;
 	}
 
 	/* manufacturer claims that this device can work with baud rates
@@ -517,19 +524,17 @@ static void oti6858_set_termios(struct tty_struct *tty,
 	}
 
 	frame_fmt &= ~FMT_STOP_BITS_MASK;
-	if ((cflag & CSTOPB) != 0) {
+	if ((cflag & CSTOPB) != 0)
 		frame_fmt |= FMT_STOP_BITS_2;
-	} else {
+	else
 		frame_fmt |= FMT_STOP_BITS_1;
-	}
 
 	frame_fmt &= ~FMT_PARITY_MASK;
 	if ((cflag & PARENB) != 0) {
-		if ((cflag & PARODD) != 0) {
+		if ((cflag & PARODD) != 0)
 			frame_fmt |= FMT_PARITY_ODD;
-		} else {
+		else
 			frame_fmt |= FMT_PARITY_EVEN;
-		}
 	} else {
 		frame_fmt |= FMT_PARITY_NONE;
 	}
@@ -584,7 +589,8 @@ static int oti6858_open(struct tty_struct *tty,
 	if (port->port.count != 1)
 		return 0;
 
-	if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
+	buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
+	if (buf == NULL) {
 		dev_err(&port->dev, "%s(): out of memory!\n", __func__);
 		return -ENOMEM;
 	}
@@ -729,11 +735,10 @@ static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
 	if ((clear & TIOCM_DTR) != 0)
 		control &= ~CONTROL_DTR_HIGH;
 
-	if (control != priv->pending_setup.control) {
+	if (control != priv->pending_setup.control)
 		priv->pending_setup.control = control;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 
+	spin_unlock_irqrestore(&priv->lock, flags);
 	return 0;
 }
 
@@ -785,7 +790,8 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
-		wait_event_interruptible(priv->intr_wait, priv->status.pin_state != prev);
+		wait_event_interruptible(priv->intr_wait,
+					priv->status.pin_state != prev);
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
@@ -795,12 +801,11 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 
 		changed = prev ^ status;
 		/* FIXME: check if this is correct (active high/low) */
-		if (	((arg & TIOCM_RNG) && (changed & PIN_RI)) ||
-			((arg & TIOCM_DSR) && (changed & PIN_DSR)) ||
-			((arg & TIOCM_CD)  && (changed & PIN_DCD)) ||
-			((arg & TIOCM_CTS) && (changed & PIN_CTS))) {
-				return 0;
-		}
+		if (((arg & TIOCM_RNG) && (changed & PIN_RI)) ||
+		    ((arg & TIOCM_DSR) && (changed & PIN_DSR)) ||
+		    ((arg & TIOCM_CD)  && (changed & PIN_DCD)) ||
+		    ((arg & TIOCM_CTS) && (changed & PIN_CTS)))
+			return 0;
 		prev = status;
 	}
 
@@ -817,15 +822,13 @@ static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 				__func__, port->number, cmd, arg);
 
 	switch (cmd) {
-		case TIOCMIWAIT:
-			dbg("%s(): TIOCMIWAIT", __func__);
-			return wait_modem_info(port, arg);
-
-		default:
-			dbg("%s(): 0x%04x not supported", __func__, cmd);
-			break;
+	case TIOCMIWAIT:
+		dbg("%s(): TIOCMIWAIT", __func__);
+		return wait_modem_info(port, arg);
+	default:
+		dbg("%s(): 0x%04x not supported", __func__, cmd);
+		break;
 	}
-
 	return -ENOIOCTLCMD;
 }
 
@@ -941,7 +944,7 @@ static void oti6858_read_int_callback(struct urb *urb)
 		spin_lock_irqsave(&priv->lock, flags);
 		if (priv->flags.write_urb_in_use == 0
 				&& oti6858_buf_data_avail(priv->buf) != 0) {
-			schedule_delayed_work(&priv->delayed_write_work,0);
+			schedule_delayed_work(&priv->delayed_write_work, 0);
 			resubmit = 0;
 		}
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -950,7 +953,7 @@ static void oti6858_read_int_callback(struct urb *urb)
 	if (resubmit) {
 		int result;
 
-//		dbg("%s(): submitting interrupt urb", __func__);
+/*		dbg("%s(): submitting interrupt urb", __func__); */
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result != 0) {
@@ -985,8 +988,10 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 		}
 		/*
 		if (status == -EPROTO) {
-			// PL2303 mysteriously fails with -EPROTO reschedule the read
-			dbg("%s - caught -EPROTO, resubmitting the urb", __func__);
+			* PL2303 mysteriously fails with -EPROTO reschedule
+			   the read *
+			dbg("%s - caught -EPROTO, resubmitting the urb",
+								__func__);
 			result = usb_submit_urb(urb, GFP_ATOMIC);
 			if (result)
 				dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
@@ -1003,7 +1008,7 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 		tty_flip_buffer_push(tty);
 	}
 
-	// schedule the interrupt urb if we are still open */
+	/* schedule the interrupt urb if we are still open */
 	if (port->port.count != 0) {
 		port->interrupt_in_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
@@ -1055,7 +1060,7 @@ static void oti6858_write_bulk_callback(struct urb *urb)
 
 	priv->flags.write_urb_in_use = 0;
 
-	// schedule the interrupt urb if we are still open */
+	/* schedule the interrupt urb if we are still open */
 	port->interrupt_in_urb->dev = port->serial->dev;
 	dbg("%s(): submitting interrupt urb", __func__);
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
@@ -1130,7 +1135,7 @@ static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb)
 {
 	if (pb == NULL)
 		return 0;
-	return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
+	return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
 }
 
 /*
@@ -1143,7 +1148,7 @@ static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb)
 {
 	if (pb == NULL)
 		return 0;
-	return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+	return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
 }
 
 /*
@@ -1230,13 +1235,12 @@ static int __init oti6858_init(void)
 {
 	int retval;
 
-	if ((retval = usb_serial_register(&oti6858_device)) == 0) {
-		if ((retval = usb_register(&oti6858_driver)) != 0)
+	retval = usb_serial_register(&oti6858_device);
+	if (retval == 0) {
+		retval = usb_register(&oti6858_driver);
+		if (retval)
 			usb_serial_deregister(&oti6858_device);
-		else
-			return 0;
 	}
-
 	return retval;
 }
 
-- 
cgit v1.2.3


From 19e58fae0c8f197d80fcea338b94fb5740369bc1 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:15:45 +0100
Subject: tty-usb-option: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/option.c | 65 ++++++++++++++++++++++++---------------------
 1 file changed, 35 insertions(+), 30 deletions(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 4350990abf1..e4eca95f2b0 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -43,8 +43,10 @@
 #include <linux/usb/serial.h>
 
 /* Function prototypes */
-static int  option_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void option_close(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  option_open(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *filp);
+static void option_close(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *filp);
 static int  option_startup(struct usb_serial *serial);
 static void option_shutdown(struct usb_serial *serial);
 static int  option_write_room(struct tty_struct *tty);
@@ -393,15 +395,15 @@ static int __init option_init(void)
 	return 0;
 
 failed_driver_register:
-	usb_serial_deregister (&option_1port_device);
+	usb_serial_deregister(&option_1port_device);
 failed_1port_device_register:
 	return retval;
 }
 
 static void __exit option_exit(void)
 {
-	usb_deregister (&option_driver);
-	usb_serial_deregister (&option_1port_device);
+	usb_deregister(&option_driver);
+	usb_serial_deregister(&option_1port_device);
 }
 
 module_init(option_init);
@@ -471,7 +473,7 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	i = 0;
 	left = count;
-	for (i=0; left > 0 && i < N_OUT_URB; i++) {
+	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
 		todo = left;
 		if (todo > OUT_BUFLEN)
 			todo = OUT_BUFLEN;
@@ -492,7 +494,7 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 			usb_pipeendpoint(this_urb->pipe), i);
 
 		/* send the data */
-		memcpy (this_urb->transfer_buffer, buf, todo);
+		memcpy(this_urb->transfer_buffer, buf, todo);
 		this_urb->transfer_buffer_length = todo;
 
 		this_urb->dev = port->serial->dev;
@@ -583,7 +585,7 @@ static void option_instat_callback(struct urb *urb)
 	struct usb_serial *serial = port->serial;
 
 	dbg("%s", __func__);
-	dbg("%s: urb %p port %p has data %p", __func__,urb,port,portdata);
+	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
 
 	if (status == 0) {
 		struct usb_ctrlrequest *req_pkt =
@@ -613,7 +615,7 @@ static void option_instat_callback(struct urb *urb)
 				tty_hangup(port->port.tty);
 		} else {
 			dbg("%s: type %x req %x", __func__,
-				req_pkt->bRequestType,req_pkt->bRequest);
+				req_pkt->bRequestType, req_pkt->bRequest);
 		}
 	} else
 		dbg("%s: error %d", __func__, status);
@@ -639,7 +641,7 @@ static int option_write_room(struct tty_struct *tty)
 	portdata = usb_get_serial_port_data(port);
 
 
-	for (i=0; i < N_OUT_URB; i++) {
+	for (i = 0; i < N_OUT_URB; i++) {
 		this_urb = portdata->out_urbs[i];
 		if (this_urb && !test_bit(i, &portdata->out_busy))
 			data_len += OUT_BUFLEN;
@@ -659,7 +661,7 @@ static int option_chars_in_buffer(struct tty_struct *tty)
 
 	portdata = usb_get_serial_port_data(port);
 
-	for (i=0; i < N_OUT_URB; i++) {
+	for (i = 0; i < N_OUT_URB; i++) {
 		this_urb = portdata->out_urbs[i];
 		/* FIXME: This locking is insufficient as this_urb may
 		   go unused during the test */
@@ -689,7 +691,7 @@ static int option_open(struct tty_struct *tty,
 	/* Reset low level data toggle and start reading from endpoints */
 	for (i = 0; i < N_IN_URB; i++) {
 		urb = portdata->in_urbs[i];
-		if (! urb)
+		if (!urb)
 			continue;
 		if (urb->dev != serial->dev) {
 			dbg("%s: dev %p != %p", __func__,
@@ -714,7 +716,7 @@ static int option_open(struct tty_struct *tty,
 	/* Reset low level data toggle on out endpoints */
 	for (i = 0; i < N_OUT_URB; i++) {
 		urb = portdata->out_urbs[i];
-		if (! urb)
+		if (!urb)
 			continue;
 		urb->dev = serial->dev;
 		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
@@ -726,7 +728,7 @@ static int option_open(struct tty_struct *tty,
 
 	option_send_setup(tty, port);
 
-	return (0);
+	return 0;
 }
 
 static void option_close(struct tty_struct *tty,
@@ -784,7 +786,7 @@ static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
 /* Setup urbs */
 static void option_setup_urbs(struct usb_serial *serial)
 {
-	int i,j;
+	int i, j;
 	struct usb_serial_port *port;
 	struct option_port_private *portdata;
 
@@ -794,18 +796,22 @@ static void option_setup_urbs(struct usb_serial *serial)
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
 
-	/* Do indat endpoints first */
+		/* Do indat endpoints first */
 		for (j = 0; j < N_IN_URB; ++j) {
-			portdata->in_urbs[j] = option_setup_urb (serial,
-                  	port->bulk_in_endpointAddress, USB_DIR_IN, port,
-                  	portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
+			portdata->in_urbs[j] = option_setup_urb(serial,
+					port->bulk_in_endpointAddress,
+					USB_DIR_IN, port,
+					portdata->in_buffer[j],
+					IN_BUFLEN, option_indat_callback);
 		}
 
 		/* outdat endpoints */
 		for (j = 0; j < N_OUT_URB; ++j) {
-			portdata->out_urbs[j] = option_setup_urb (serial,
-                  	port->bulk_out_endpointAddress, USB_DIR_OUT, port,
-                  	portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
+			portdata->out_urbs[j] = option_setup_urb(serial,
+					port->bulk_out_endpointAddress,
+					USB_DIR_OUT, port,
+					portdata->out_buffer[j],
+					OUT_BUFLEN, option_outdat_callback);
 		}
 	}
 }
@@ -834,8 +840,8 @@ static int option_send_setup(struct tty_struct *tty,
 			val |= 0x02;
 
 		return usb_control_msg(serial->dev,
-				usb_rcvctrlpipe(serial->dev, 0),
-				0x22,0x21,val,ifNum,NULL,0,USB_CTRL_SET_TIMEOUT);
+			usb_rcvctrlpipe(serial->dev, 0),
+			0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 	}
 	return 0;
 }
@@ -856,7 +862,7 @@ static int option_startup(struct usb_serial *serial)
 		if (!portdata) {
 			dbg("%s: kmalloc for option_port_private (%d) failed!.",
 					__func__, i);
-			return (1);
+			return 1;
 		}
 
 		for (j = 0; j < N_IN_URB; j++) {
@@ -875,17 +881,15 @@ static int option_startup(struct usb_serial *serial)
 
 		usb_set_serial_port_data(port, portdata);
 
-		if (! port->interrupt_in_urb)
+		if (!port->interrupt_in_urb)
 			continue;
 		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (err)
 			dbg("%s: submit irq_in urb failed %d",
 				__func__, err);
 	}
-
 	option_setup_urbs(serial);
-
-	return (0);
+	return 0;
 
 bail_out_error2:
 	for (j = 0; j < N_OUT_URB; j++)
@@ -924,7 +928,8 @@ static void option_shutdown(struct usb_serial *serial)
 		for (j = 0; j < N_IN_URB; j++) {
 			if (portdata->in_urbs[j]) {
 				usb_free_urb(portdata->in_urbs[j]);
-				free_page((unsigned long)portdata->in_buffer[j]);
+				free_page((unsigned long)
+					portdata->in_buffer[j]);
 				portdata->in_urbs[j] = NULL;
 			}
 		}
-- 
cgit v1.2.3


From f89d0dff2507b6bd486b7db59a5f6a733fbfaa12 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:15:54 +0100
Subject: tty-usb-omninet: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/omninet.c | 160 +++++++++++++++++++++++--------------------
 1 file changed, 87 insertions(+), 73 deletions(-)

diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 5a2d045562f..5a76f327ef5 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -5,26 +5,28 @@
  *	modify it under the terms of the GNU General Public License version
  *	2 as published by the Free Software Foundation.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  * Please report both successes and troubles to the author at omninet@kroah.com
- * 
+ *
  * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of problems.
+ *	switched from using spinlock to a semaphore, which fixes lots of
+ *	problems.
  *
  * (04/08/2001) gb
  *	Identify version on module load.
  *
  * (11/01/2000) Adam J. Richter
  *	usb_device_id table support
- * 
+ *
  * (10/05/2000) gkh
  *	Fixed bug with urb->dev not being set properly, now that the usb
  *	core needs it.
- * 
+ *
  * (08/28/2000) gkh
  *	Added locks for SMP safeness.
- *	Fixed MOD_INC and MOD_DEC logic and the ability to open a port more 
+ *	Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
  *	than once.
  *	Fixed potential race in omninet_write_bulk_callback
  *
@@ -43,7 +45,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -58,25 +60,29 @@ static int debug;
 
 #define ZYXEL_VENDOR_ID		0x0586
 #define ZYXEL_OMNINET_ID	0x1000
-#define BT_IGNITIONPRO_ID	0x2000  /* This one seems to be a re-branded ZyXEL device */
+/* This one seems to be a re-branded ZyXEL device */
+#define BT_IGNITIONPRO_ID	0x2000
 
 /* function prototypes */
-static int  omninet_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void omninet_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void omninet_read_bulk_callback	(struct urb *urb);
-static void omninet_write_bulk_callback	(struct urb *urb);
-static int  omninet_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  omninet_write_room		(struct tty_struct *tty);
-static void omninet_shutdown		(struct usb_serial *serial);
-static int omninet_attach		(struct usb_serial *serial);
-
-static struct usb_device_id id_table [] = {
+static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *filp);
+static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *filp);
+static void omninet_read_bulk_callback(struct urb *urb);
+static void omninet_write_bulk_callback(struct urb *urb);
+static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
+				const unsigned char *buf, int count);
+static int  omninet_write_room(struct tty_struct *tty);
+static void omninet_shutdown(struct usb_serial *serial);
+static int omninet_attach(struct usb_serial *serial);
+
+static struct usb_device_id id_table[] = {
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
 	{ }						/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver omninet_driver = {
 	.name =		"omninet",
@@ -130,27 +136,26 @@ static struct usb_serial_driver zyxel_omninet_device = {
  *
  */
 
-struct omninet_header
-{
+struct omninet_header {
 	__u8	oh_seq;
 	__u8	oh_len;
 	__u8	oh_xxx;
 	__u8	oh_pad;
 };
 
-struct omninet_data
-{
-	__u8	od_outseq;	// Sequence number for bulk_out URBs
+struct omninet_data {
+	__u8	od_outseq;	/* Sequence number for bulk_out URBs */
 };
 
-static int omninet_attach (struct usb_serial *serial)
+static int omninet_attach(struct usb_serial *serial)
 {
 	struct omninet_data *od;
 	struct usb_serial_port *port = serial->port[0];
 
-	od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL );
-	if( !od ) {
-		err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct omninet_data));
+	od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL);
+	if (!od) {
+		err("%s- kmalloc(%Zd) failed.",
+				__func__, sizeof(struct omninet_data));
 		return -ENOMEM;
 	}
 	usb_set_serial_port_data(port, od);
@@ -170,20 +175,21 @@ static int omninet_open(struct tty_struct *tty,
 	wport->port.tty = tty;		/* FIXME */
 
 	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, serial->dev, 
-		      usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
-		      omninet_read_bulk_callback, port);
+	usb_fill_bulk_urb(port->read_urb, serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				port->bulk_in_endpointAddress),
+			port->read_urb->transfer_buffer,
+			port->read_urb->transfer_buffer_length,
+			omninet_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		err("%s - failed submitting read urb, error %d", __func__, result);
-	}
-
+	if (result)
+		err("%s - failed submitting read urb, error %d",
+							__func__, result);
 	return result;
 }
 
 static void omninet_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
@@ -194,7 +200,7 @@ static void omninet_close(struct tty_struct *tty,
 #define OMNINET_HEADERLEN	sizeof(struct omninet_header)
 #define OMNINET_BULKOUTSIZE 	(64 - OMNINET_HEADERLEN)
 
-static void omninet_read_bulk_callback (struct urb *urb)
+static void omninet_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port 	*port 	= urb->context;
 	unsigned char 		*data 	= urb->transfer_buffer;
@@ -211,31 +217,34 @@ static void omninet_read_bulk_callback (struct urb *urb)
 		return;
 	}
 
-	if ((debug) && (header->oh_xxx != 0x30)) {
+	if (debug && header->oh_xxx != 0x30) {
 		if (urb->actual_length) {
-			printk (KERN_DEBUG __FILE__ ": omninet_read %d: ", header->oh_len);
-			for (i = 0; i < (header->oh_len + OMNINET_HEADERLEN); i++) {
-				printk ("%.2x ", data[i]);
-			}
-			printk ("\n");
+			printk(KERN_DEBUG __FILE__
+					": omninet_read %d: ", header->oh_len);
+			for (i = 0; i < (header->oh_len +
+						OMNINET_HEADERLEN); i++)
+				printk("%.2x ", data[i]);
+			printk("\n");
 		}
 	}
 
 	if (urb->actual_length && header->oh_len) {
-		for (i = 0; i < header->oh_len; i++) {
-			 tty_insert_flip_char(port->port.tty, data[OMNINET_DATAOFFSET + i], 0);
-	  	}
-	  	tty_flip_buffer_push(port->port.tty);
+		for (i = 0; i < header->oh_len; i++)
+			 tty_insert_flip_char(port->port.tty,
+					data[OMNINET_DATAOFFSET + i], 0);
+		tty_flip_buffer_push(port->port.tty);
 	}
 
 	/* Continue trying to always read  */
-	usb_fill_bulk_urb(urb, port->serial->dev, 
-		      usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
-		      urb->transfer_buffer, urb->transfer_buffer_length,
-		      omninet_read_bulk_callback, port);
+	usb_fill_bulk_urb(urb, port->serial->dev,
+			usb_rcvbulkpipe(port->serial->dev,
+					port->bulk_in_endpointAddress),
+			urb->transfer_buffer, urb->transfer_buffer_length,
+			omninet_read_bulk_callback, port);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result)
-		err("%s - failed resubmitting read urb, error %d", __func__, result);
+		err("%s - failed resubmitting read urb, error %d",
+						__func__, result);
 
 	return;
 }
@@ -243,11 +252,12 @@ static void omninet_read_bulk_callback (struct urb *urb)
 static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count)
 {
-	struct usb_serial 	*serial	= port->serial;
-	struct usb_serial_port 	*wport	= serial->port[1];
+	struct usb_serial *serial = port->serial;
+	struct usb_serial_port *wport = serial->port[1];
 
-	struct omninet_data 	*od 	= usb_get_serial_port_data(port);
-	struct omninet_header	*header = (struct omninet_header *) wport->write_urb->transfer_buffer;
+	struct omninet_data *od = usb_get_serial_port_data(port);
+	struct omninet_header *header = (struct omninet_header *)
+					wport->write_urb->transfer_buffer;
 
 	int			result;
 
@@ -255,7 +265,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	if (count == 0) {
 		dbg("%s - write request of 0 bytes", __func__);
-		return (0);
+		return 0;
 	}
 
 	spin_lock_bh(&wport->lock);
@@ -269,9 +279,11 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
 
-	memcpy (wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET, buf, count);
+	memcpy(wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET,
+								buf, count);
 
-	usb_serial_debug_data(debug, &port->dev, __func__, count, wport->write_urb->transfer_buffer);
+	usb_serial_debug_data(debug, &port->dev, __func__, count,
+					wport->write_urb->transfer_buffer);
 
 	header->oh_seq 	= od->od_outseq++;
 	header->oh_len 	= count;
@@ -285,7 +297,8 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
 		wport->write_urb_busy = 0;
-		err("%s - failed submitting write urb, error %d", __func__, result);
+		err("%s - failed submitting write urb, error %d",
+							__func__, result);
 	} else
 		result = count;
 
@@ -293,7 +306,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 }
 
 
-static int omninet_write_room (struct tty_struct *tty)
+static int omninet_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial 	*serial = port->serial;
@@ -307,12 +320,13 @@ static int omninet_write_room (struct tty_struct *tty)
 
 	dbg("%s - returns %d", __func__, room);
 
-	return (room);
+	return room;
 }
 
-static void omninet_write_bulk_callback (struct urb *urb)
+static void omninet_write_bulk_callback(struct urb *urb)
 {
-/*	struct omninet_header	*header = (struct omninet_header  *) urb->transfer_buffer; */
+/*	struct omninet_header	*header = (struct omninet_header  *)
+						urb->transfer_buffer; */
 	struct usb_serial_port 	*port   =  urb->context;
 	int status = urb->status;
 
@@ -329,18 +343,18 @@ static void omninet_write_bulk_callback (struct urb *urb)
 }
 
 
-static void omninet_shutdown (struct usb_serial *serial)
+static void omninet_shutdown(struct usb_serial *serial)
 {
 	struct usb_serial_port *wport = serial->port[1];
 	struct usb_serial_port *port = serial->port[0];
-	dbg ("%s", __func__);
+	dbg("%s", __func__);
 
 	usb_kill_urb(wport->write_urb);
 	kfree(usb_get_serial_port_data(port));
 }
 
 
-static int __init omninet_init (void)
+static int __init omninet_init(void)
 {
 	int retval;
 	retval = usb_serial_register(&zyxel_omninet_device);
@@ -358,18 +372,18 @@ failed_usb_serial_register:
 }
 
 
-static void __exit omninet_exit (void)
+static void __exit omninet_exit(void)
 {
-	usb_deregister (&omninet_driver);
-	usb_serial_deregister (&zyxel_omninet_device);
+	usb_deregister(&omninet_driver);
+	usb_serial_deregister(&zyxel_omninet_device);
 }
 
 
 module_init(omninet_init);
 module_exit(omninet_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From 4944d40054d73b2f8d7d546f55c206eb3baf2710 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:16:03 +0100
Subject: omninet: Use string flip functions

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/omninet.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 5a76f327ef5..ae8e227f3db 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -206,8 +206,8 @@ static void omninet_read_bulk_callback(struct urb *urb)
 	unsigned char 		*data 	= urb->transfer_buffer;
 	struct omninet_header 	*header = (struct omninet_header *) &data[0];
 	int status = urb->status;
-	int i;
 	int result;
+	int i;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -229,9 +229,8 @@ static void omninet_read_bulk_callback(struct urb *urb)
 	}
 
 	if (urb->actual_length && header->oh_len) {
-		for (i = 0; i < header->oh_len; i++)
-			 tty_insert_flip_char(port->port.tty,
-					data[OMNINET_DATAOFFSET + i], 0);
+		tty_insert_flip_string(port->port.tty,
+			data + OMNINET_DATAOFFSET, header->oh_len);
 		tty_flip_buffer_push(port->port.tty);
 	}
 
-- 
cgit v1.2.3


From 880af9db2c35c5fedaef0de89473f202329934db Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:16:12 +0100
Subject: mos7840: remove loads of bogus assignments to status

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/mos7840.c | 400 ++++++++++++++++++-------------------------
 1 file changed, 164 insertions(+), 236 deletions(-)

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2b1fded6619..09d82062b97 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -33,7 +33,7 @@
 #include <linux/serial.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 /*
  * Version Information
@@ -82,8 +82,8 @@
  * Defines used for sending commands to port
  */
 
-#define WAIT_FOR_EVER   (HZ * 0 )	/* timeout urb is wait for ever */
-#define MOS_WDR_TIMEOUT (HZ * 5 )	/* default urb timeout */
+#define WAIT_FOR_EVER   (HZ * 0)	/* timeout urb is wait for ever */
+#define MOS_WDR_TIMEOUT (HZ * 5)	/* default urb timeout */
 
 #define MOS_PORT1       0x0200
 #define MOS_PORT2       0x0300
@@ -102,8 +102,8 @@
 
 #define MAX_NAME_LEN    64
 
-#define ZLP_REG1  0x3A		//Zero_Flag_Reg1    58
-#define ZLP_REG5  0x3E		//Zero_Flag_Reg5    62
+#define ZLP_REG1  0x3A		/* Zero_Flag_Reg1    58 */
+#define ZLP_REG5  0x3E		/* Zero_Flag_Reg5    62 */
 
 /* For higher baud Rates use TIOCEXBAUD */
 #define TIOCEXBAUD     0x5462
@@ -142,7 +142,7 @@
 #define MOS_MSR_DELTA_RI    0x40
 #define MOS_MSR_DELTA_CD    0x80
 
-// Serial Port register Address
+/* Serial Port register Address */
 #define INTERRUPT_ENABLE_REGISTER  ((__u16)(0x01))
 #define FIFO_CONTROL_REGISTER      ((__u16)(0x02))
 #define LINE_CONTROL_REGISTER      ((__u16)(0x03))
@@ -201,11 +201,11 @@ struct moschip_port {
 	struct async_icount icount;
 	struct usb_serial_port *port;	/* loop back to the owner of this object */
 
-	/*Offsets */
+	/* Offsets */
 	__u8 SpRegOffset;
 	__u8 ControlRegOffset;
 	__u8 DcrRegOffset;
-	//for processing control URBS in interrupt context
+	/* for processing control URBS in interrupt context */
 	struct urb *control_urb;
 	struct usb_ctrlrequest *dr;
 	char *ctrl_buf;
@@ -244,7 +244,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
  */
 
 static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
-				__u16 * val)
+				__u16 *val)
 {
 	struct usb_device *dev = port->serial->dev;
 	int ret = 0;
@@ -269,16 +269,15 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
 
 	struct usb_device *dev = port->serial->dev;
 	val = val & 0x00ff;
-	// For the UART control registers, the application number need to be Or'ed
+	/* For the UART control registers, the application number need
+	   to be Or'ed */
 	if (port->serial->num_ports == 4) {
-		val |=
-		    (((__u16) port->number - (__u16) (port->serial->minor)) +
-		     1) << 8;
+		val |= (((__u16) port->number -
+				(__u16) (port->serial->minor)) + 1) << 8;
 		dbg("mos7840_set_uart_reg application number is %x\n", val);
 	} else {
 		if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
-			val |=
-			    (((__u16) port->number -
+			val |= (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 1) << 8;
 			dbg("mos7840_set_uart_reg application number is %x\n",
 			    val);
@@ -302,14 +301,15 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
  *	by passing usb_rcvctrlpipe function as parameter.
  */
 static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
-				__u16 * val)
+				__u16 *val)
 {
 	struct usb_device *dev = port->serial->dev;
 	int ret = 0;
 	__u16 Wval;
 
-	//dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8);
-	/*Wval  is same as application number */
+	/* dbg("application number is %4x \n",
+	    (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
+	/* Wval  is same as application number */
 	if (port->serial->num_ports == 4) {
 		Wval =
 		    (((__u16) port->number - (__u16) (port->serial->minor)) +
@@ -317,14 +317,12 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 		dbg("mos7840_get_uart_reg application number is %x\n", Wval);
 	} else {
 		if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
-			Wval =
-			    (((__u16) port->number -
+			Wval = (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 1) << 8;
 			dbg("mos7840_get_uart_reg application number is %x\n",
 			    Wval);
 		} else {
-			Wval =
-			    (((__u16) port->number -
+			Wval = (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 2) << 8;
 			dbg("mos7840_get_uart_reg application number is %x\n",
 			    Wval);
@@ -406,11 +404,11 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
 	dbg("%s - %02x", __func__, new_lsr);
 
 	if (new_lsr & SERIAL_LSR_BI) {
-		//
-		// Parity and Framing errors only count if they
-		// occur exclusive of a break being
-		// received.
-		//
+		/*
+		 * Parity and Framing errors only count if they
+		 * occur exclusive of a break being
+		 * received.
+		 */
 		new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
 	}
 
@@ -492,7 +490,7 @@ exit:
 }
 
 static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
-			   __u16 * val)
+			   __u16 *val)
 {
 	struct usb_device *dev = mcs->port->serial->dev;
 	struct usb_ctrlrequest *dr = mcs->dr;
@@ -501,7 +499,7 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
 
 	dr->bRequestType = MCS_RD_RTYPE;
 	dr->bRequest = MCS_RDREQ;
-	dr->wValue = cpu_to_le16(Wval);	//0;
+	dr->wValue = cpu_to_le16(Wval);	/* 0 */
 	dr->wIndex = cpu_to_le16(reg);
 	dr->wLength = cpu_to_le16(2);
 
@@ -607,7 +605,8 @@ static void mos7840_interrupt_callback(struct urb *urb)
 			}
 		}
 	}
-	if (!(rv < 0)) /* the completion handler for the control urb will resubmit */
+	if (!(rv < 0))
+		/* the completion handler for the control urb will resubmit */
 		return;
 exit:
 	result = usb_submit_urb(urb, GFP_ATOMIC);
@@ -656,8 +655,8 @@ static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port,
 	if (!port ||
 	    mos7840_port_paranoia_check(port, function) ||
 	    mos7840_serial_paranoia_check(port->serial, function)) {
-		/* then say that we don't have a valid usb_serial thing, which will
-		 * end up genrating -ENODEV return values */
+		/* then say that we don't have a valid usb_serial thing,
+		 * which will end up genrating -ENODEV return values */
 		return NULL;
 	}
 
@@ -741,8 +740,8 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 
 /*****************************************************************************
  * mos7840_bulk_out_data_callback
- *	this is the callback function for when we have finished sending serial data
- *	on the bulk out endpoint.
+ *	this is the callback function for when we have finished sending
+ *	serial data on the bulk out endpoint.
  *****************************************************************************/
 
 static void mos7840_bulk_out_data_callback(struct urb *urb)
@@ -848,7 +847,8 @@ static int mos7840_open(struct tty_struct *tty,
 			continue;
 		}
 
-		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
+		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
+								GFP_KERNEL);
 		if (!urb->transfer_buffer) {
 			usb_free_urb(urb);
 			mos7840_port->write_urb_pool[j] = NULL;
@@ -869,9 +869,8 @@ static int mos7840_open(struct tty_struct *tty,
  * 0x08 : SP1/2 Control Reg
  *****************************************************************************/
 
-//NEED to check the following Block
+	/* NEED to check the following Block */
 
-	status = 0;
 	Data = 0x0;
 	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
 	if (status < 0) {
@@ -891,36 +890,35 @@ static int mos7840_open(struct tty_struct *tty,
 		dbg("writing Spreg failed\n");
 		return -1;
 	}
-//End of block to be checked
+	/* End of block to be checked */
 
-	status = 0;
 	Data = 0x0;
-	status =
-	    mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
+	status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
+									&Data);
 	if (status < 0) {
 		dbg("Reading Controlreg failed\n");
 		return -1;
 	}
-	Data |= 0x08;		//Driver done bit
-	Data |= 0x20;		//rx_disable
-	status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+	Data |= 0x08;		/* Driver done bit */
+	Data |= 0x20;		/* rx_disable */
+	status = mos7840_set_reg_sync(port,
+				mos7840_port->ControlRegOffset, Data);
 	if (status < 0) {
 		dbg("writing Controlreg failed\n");
 		return -1;
 	}
-	//do register settings here
-	// Set all regs to the device default values.
-	////////////////////////////////////
-	// First Disable all interrupts.
-	////////////////////////////////////
-
+	/* do register settings here */
+	/* Set all regs to the device default values. */
+	/***********************************
+	 * First Disable all interrupts.
+	 ***********************************/
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 	if (status < 0) {
 		dbg("disableing interrupts failed\n");
 		return -1;
 	}
-	// Set FIFO_CONTROL_REGISTER to the default value
+	/* Set FIFO_CONTROL_REGISTER to the default value */
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
@@ -947,90 +945,73 @@ static int mos7840_open(struct tty_struct *tty,
 	status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
 	mos7840_port->shadowLCR = Data;
 
-	Data |= SERIAL_LCR_DLAB;	//data latch enable in LCR 0x80
+	Data |= SERIAL_LCR_DLAB;	/* data latch enable in LCR 0x80 */
 	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 
 	Data = 0x0c;
-	status = 0;
 	status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
 
 	Data = 0x0;
-	status = 0;
 	status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
 
 	Data = 0x00;
-	status = 0;
 	status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
 
 	Data = Data & ~SERIAL_LCR_DLAB;
-	status = 0;
 	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 	mos7840_port->shadowLCR = Data;
 
-	//clearing Bulkin and Bulkout Fifo
+	/* clearing Bulkin and Bulkout Fifo */
 	Data = 0x0;
-	status = 0;
 	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
 
 	Data = Data | 0x0c;
-	status = 0;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 
 	Data = Data & ~0x0c;
-	status = 0;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
-	//Finally enable all interrupts
-	Data = 0x0;
+	/* Finally enable all interrupts */
 	Data = 0x0c;
-	status = 0;
 	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 
-	//clearing rx_disable
+	/* clearing rx_disable */
 	Data = 0x0;
-	status = 0;
-	status =
-	    mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
+	status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
+									&Data);
 	Data = Data & ~0x20;
-	status = 0;
-	status =
-	    mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+	status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
+									Data);
 
-	// rx_negate
+	/* rx_negate */
 	Data = 0x0;
-	status = 0;
-	status =
-	    mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
+	status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
+									&Data);
 	Data = Data | 0x10;
-	status = 0;
-	status =
-	    mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+	status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
+									Data);
 
 	/* force low_latency on so that our tty_push actually forces *
 	 * the data through,otherwise it is scheduled, and with      *
 	 * high data rates (like with OHCI) data can get lost.       */
-
 	if (tty)
 		tty->low_latency = 1;
-/* Check to see if we've set up our endpoint info yet    *
-     * (can't set it up in mos7840_startup as the structures *
-     * were not set up at that time.)                        */
+
+	/* Check to see if we've set up our endpoint info yet    *
+	 * (can't set it up in mos7840_startup as the structures *
+	 * were not set up at that time.)                        */
 	if (port0->open_ports == 1) {
 		if (serial->port[0]->interrupt_in_buffer == NULL) {
-
 			/* set up interrupt urb */
-
 			usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
-					 serial->dev,
-					 usb_rcvintpipe(serial->dev,
-							serial->port[0]->
-							interrupt_in_endpointAddress),
-					 serial->port[0]->interrupt_in_buffer,
-					 serial->port[0]->interrupt_in_urb->
-					 transfer_buffer_length,
-					 mos7840_interrupt_callback,
-					 serial,
-					 serial->port[0]->interrupt_in_urb->
-					 interval);
+				serial->dev,
+				usb_rcvintpipe(serial->dev,
+				serial->port[0]->interrupt_in_endpointAddress),
+				serial->port[0]->interrupt_in_buffer,
+				serial->port[0]->interrupt_in_urb->
+				transfer_buffer_length,
+				mos7840_interrupt_callback,
+				serial,
+				serial->port[0]->interrupt_in_urb->interval);
 
 			/* start interrupt read for mos7840               *
 			 * will continue as long as mos7840 is connected  */
@@ -1085,14 +1066,16 @@ static int mos7840_open(struct tty_struct *tty,
 	memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount));
 
 	/* initialize our port settings */
-	mos7840_port->shadowMCR = MCR_MASTER_IE;	/* Must set to enable ints! */
+	/* Must set to enable ints! */
+	mos7840_port->shadowMCR = MCR_MASTER_IE;
 	/* send a open port command */
 	mos7840_port->open = 1;
-	//mos7840_change_port_settings(mos7840_port,old_termios);
+	/* mos7840_change_port_settings(mos7840_port,old_termios); */
 	mos7840_port->icount.tx = 0;
 	mos7840_port->icount.rx = 0;
 
-	dbg("\n\nusb_serial serial:%p       mos7840_port:%p\n      usb_serial_port port:%p\n\n", serial, mos7840_port, port);
+	dbg("\n\nusb_serial serial:%p       mos7840_port:%p\n      usb_serial_port port:%p\n\n",
+				serial, mos7840_port, port);
 
 	return 0;
 
@@ -1129,11 +1112,11 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 		return 0;
 	}
 
-	spin_lock_irqsave(&mos7840_port->pool_lock,flags);
+	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
 	for (i = 0; i < NUM_URBS; ++i)
 		if (mos7840_port->busy[i])
 			chars += URB_TRANSFER_BUFFER_SIZE;
-	spin_unlock_irqrestore(&mos7840_port->pool_lock,flags);
+	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
 
@@ -1161,9 +1144,8 @@ static void mos7840_block_until_tx_empty(struct tty_struct *tty,
 		count = mos7840_chars_in_buffer(tty);
 
 		/* Check for Buffer status */
-		if (count <= 0) {
+		if (count <= 0)
 			return;
-		}
 
 		/* Block the thread for a while */
 		interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
@@ -1245,11 +1227,11 @@ static void mos7840_close(struct tty_struct *tty,
 		}
 		if ((&mos7840_port->control_urb)) {
 			dbg("%s", "Shutdown control read\n");
-			//      usb_kill_urb (mos7840_port->control_urb);
+			/*/      usb_kill_urb (mos7840_port->control_urb); */
 		}
 	}
-//      if(mos7840_port->ctrl_buf != NULL)
-//              kfree(mos7840_port->ctrl_buf);
+/*      if(mos7840_port->ctrl_buf != NULL) */
+/*              kfree(mos7840_port->ctrl_buf); */
 	port0->open_ports--;
 	dbg("mos7840_num_open_ports in close%d:in port%d\n",
 	    port0->open_ports, port->number);
@@ -1262,10 +1244,8 @@ static void mos7840_close(struct tty_struct *tty,
 
 	if (mos7840_port->write_urb) {
 		/* if this urb had a transfer buffer already (old tx) free it */
-
-		if (mos7840_port->write_urb->transfer_buffer != NULL) {
+		if (mos7840_port->write_urb->transfer_buffer != NULL)
 			kfree(mos7840_port->write_urb->transfer_buffer);
-		}
 		usb_free_urb(mos7840_port->write_urb);
 	}
 
@@ -1302,9 +1282,8 @@ static void mos7840_block_until_chase_response(struct tty_struct *tty,
 		count = mos7840_chars_in_buffer(tty);
 
 		/* Check for Buffer status */
-		if (count <= 0) {
+		if (count <= 0)
 			return;
-		}
 
 		/* Block the thread for a while */
 		interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
@@ -1349,9 +1328,8 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
 
 	mos7840_port = mos7840_get_port_private(port);
 
-	if (mos7840_port == NULL) {
+	if (mos7840_port == NULL)
 		return;
-	}
 
 	if (serial->dev)
 		/* flush and block until tx is empty */
@@ -1403,9 +1381,8 @@ static int mos7840_write_room(struct tty_struct *tty)
 
 	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
 	for (i = 0; i < NUM_URBS; ++i) {
-		if (!mos7840_port->busy[i]) {
+		if (!mos7840_port->busy[i])
 			room += URB_TRANSFER_BUFFER_SIZE;
-		}
 	}
 	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
 
@@ -1435,45 +1412,41 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	struct moschip_port *mos7840_port;
 	struct usb_serial *serial;
 	struct urb *urb;
-	//__u16 Data;
+	/* __u16 Data; */
 	const unsigned char *current_position = data;
 	unsigned char *data1;
 	dbg("%s \n", "entering ...........");
-	//dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",mos7840_port->shadowLCR);
+	/* dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+					mos7840_port->shadowLCR); */
 
 #ifdef NOTMOS7840
 	Data = 0x00;
-	status = 0;
 	status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
 	mos7840_port->shadowLCR = Data;
 	dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data);
 	dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
 	    mos7840_port->shadowLCR);
 
-	//Data = 0x03;
-	//status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data);
-	//mos7840_port->shadowLCR=Data;//Need to add later
+	/* Data = 0x03; */
+	/* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */
+	/* mos7840_port->shadowLCR=Data;//Need to add later */
 
-	Data |= SERIAL_LCR_DLAB;	//data latch enable in LCR 0x80
-	status = 0;
+	Data |= SERIAL_LCR_DLAB;	/* data latch enable in LCR 0x80 */
 	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 
-	//Data = 0x0c;
-	//status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data);
+	/* Data = 0x0c; */
+	/* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
 	Data = 0x00;
-	status = 0;
 	status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
 	dbg("mos7840_write:DLL value is %x\n", Data);
 
 	Data = 0x0;
-	status = 0;
 	status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
 	dbg("mos7840_write:DLM value is %x\n", Data);
 
 	Data = Data & ~SERIAL_LCR_DLAB;
 	dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
 	    mos7840_port->shadowLCR);
-	status = 0;
 	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 #endif
 
@@ -1598,7 +1571,6 @@ static void mos7840_throttle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7840_port->shadowMCR &= ~MCR_RTS;
-		status = 0;
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 					 mos7840_port->shadowMCR);
 		if (status < 0)
@@ -1610,8 +1582,9 @@ static void mos7840_throttle(struct tty_struct *tty)
 
 /*****************************************************************************
  * mos7840_unthrottle
- *	this function is called by the tty driver when it wants to resume the data
- *	being read from the port (called after SerialThrottle is called)
+ *	this function is called by the tty driver when it wants to resume
+ *	the data being read from the port (called after mos7840_throttle is
+ *	called)
  *****************************************************************************/
 static void mos7840_unthrottle(struct tty_struct *tty)
 {
@@ -1645,7 +1618,6 @@ static void mos7840_unthrottle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7840_port->shadowMCR |= MCR_RTS;
-		status = 0;
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 					 mos7840_port->shadowMCR);
 		if (status < 0)
@@ -1660,7 +1632,7 @@ static int mos7840_tiocmget(struct tty_struct *tty, struct file *file)
 	unsigned int result;
 	__u16 msr;
 	__u16 mcr;
-	int status = 0;
+	int status;
 	mos7840_port = mos7840_get_port_private(port);
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1731,7 +1703,7 @@ static int mos7840_tiocmset(struct tty_struct *tty, struct file *file,
  *	baud rate.
  *****************************************************************************/
 static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
-					  __u16 * clk_sel_val)
+					  __u16 *clk_sel_val)
 {
 
 	dbg("%s - %d", __func__, baudRate);
@@ -1783,9 +1755,8 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
 		/* Check for round off */
 		round1 = (__u16) (2304000L / baudrate);
 		round = (__u16) (round1 - (custom * 10));
-		if (round > 4) {
+		if (round > 4)
 			custom++;
-		}
 		*divisor = custom;
 
 		dbg(" Baud %d = %d\n", baudrate, custom);
@@ -1833,16 +1804,15 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
 	dbg("%s - port = %d, baud = %d", __func__,
 	    mos7840_port->port->number, baudRate);
-	//reset clk_uart_sel in spregOffset
+	/* reset clk_uart_sel in spregOffset */
 	if (baudRate > 115200) {
 #ifdef HW_flow_control
-		//NOTE: need to see the pther register to modify
-		//setting h/w flow control bit to 1;
-		status = 0;
+		/* NOTE: need to see the pther register to modify */
+		/* setting h/w flow control bit to 1 */
 		Data = 0x2b;
 		mos7840_port->shadowMCR = Data;
-		status =
-		    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+									Data);
 		if (status < 0) {
 			dbg("Writing spreg failed in set_serial_baud\n");
 			return -1;
@@ -1851,12 +1821,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
 	} else {
 #ifdef HW_flow_control
-		//setting h/w flow control bit to 0;
-		status = 0;
+		/ *setting h/w flow control bit to 0 */
 		Data = 0xb;
 		mos7840_port->shadowMCR = Data;
-		status =
-		    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+									Data);
 		if (status < 0) {
 			dbg("Writing spreg failed in set_serial_baud\n");
 			return -1;
@@ -1865,25 +1834,20 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
 	}
 
-	if (1)			//baudRate <= 115200)
-	{
+	if (1) {		/* baudRate <= 115200) */
 		clk_sel_val = 0x0;
 		Data = 0x0;
-		status = 0;
-		status =
-		    mos7840_calc_baud_rate_divisor(baudRate, &divisor,
+		status = mos7840_calc_baud_rate_divisor(baudRate, &divisor,
 						   &clk_sel_val);
-		status =
-		    mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
-					 &Data);
+		status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
+								 &Data);
 		if (status < 0) {
 			dbg("reading spreg failed in set_serial_baud\n");
 			return -1;
 		}
 		Data = (Data & 0x8f) | clk_sel_val;
-		status = 0;
-		status =
-		    mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+		status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset,
+								Data);
 		if (status < 0) {
 			dbg("Writing spreg failed in set_serial_baud\n");
 			return -1;
@@ -1915,7 +1879,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 		mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 
 	}
-
 	return status;
 }
 
@@ -2006,9 +1969,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 		dbg("%s - parity = none", __func__);
 	}
 
-	if (cflag & CMSPAR) {
+	if (cflag & CMSPAR)
 		lParity = lParity | 0x20;
-	}
 
 	/* Change the Stop bit */
 	if (cflag & CSTOPB) {
@@ -2050,16 +2012,13 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	/* set up the MCR register and send it to the mos7840 */
 
 	mos7840_port->shadowMCR = MCR_MASTER_IE;
-	if (cflag & CBAUD) {
+	if (cflag & CBAUD)
 		mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS);
-	}
 
-	if (cflag & CRTSCTS) {
+	if (cflag & CRTSCTS)
 		mos7840_port->shadowMCR |= (MCR_XON_ANY);
-
-	} else {
+	else
 		mos7840_port->shadowMCR &= ~(MCR_XON_ANY);
-	}
 
 	Data = mos7840_port->shadowMCR;
 	mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
@@ -2255,7 +2214,6 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
 	mos7840_port->shadowMCR = mcr;
 
 	Data = mos7840_port->shadowMCR;
-	status = 0;
 	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
 	if (status < 0) {
 		dbg("setting MODEM_CONTROL_REGISTER Failed\n");
@@ -2276,8 +2234,7 @@ static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
 	unsigned int result = 0;
 	__u16 msr;
 	unsigned int mcr = mos7840_port->shadowMCR;
-	int status = 0;
-	status = mos7840_get_uart_reg(mos7840_port->port,
+        mos7840_get_uart_reg(mos7840_port->port,
 						MODEM_STATUS_REGISTER, &msr);
 	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)	/* 0x002 */
 	    |((mcr & MCR_RTS) ? TIOCM_RTS : 0)	/* 0x004 */
@@ -2389,7 +2346,7 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 		dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
 		cprev = mos7840_port->icount;
 		while (1) {
-			//interruptible_sleep_on(&mos7840_port->delta_msr_wait);
+			/* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */
 			mos7840_port->delta_msr_cond = 0;
 			wait_event_interruptible(mos7840_port->delta_msr_wait,
 						 (mos7840_port->
@@ -2494,8 +2451,9 @@ static int mos7840_startup(struct usb_serial *serial)
 			goto error;
 		}
 
-		/* Initialize all port interrupt end point to port 0 int endpoint *
-		 * Our device has only one interrupt end point comman to all port */
+		/* Initialize all port interrupt end point to port 0 int
+		 * endpoint. Our device has only one interrupt end point
+		 * common to all port */
 
 		mos7840_port->port = serial->port[i];
 		mos7840_set_port_private(serial->port[i], mos7840_port);
@@ -2531,27 +2489,23 @@ static int mos7840_startup(struct usb_serial *serial)
 			mos7840_port->DcrRegOffset = 0x1c;
 		}
 		mos7840_dump_serial_port(mos7840_port);
-
 		mos7840_set_port_private(serial->port[i], mos7840_port);
 
-		//enable rx_disable bit in control register
-
-		status =
-		    mos7840_get_reg_sync(serial->port[i],
-					 mos7840_port->ControlRegOffset, &Data);
+		/* enable rx_disable bit in control register */
+		status = mos7840_get_reg_sync(serial->port[i],
+				 mos7840_port->ControlRegOffset, &Data);
 		if (status < 0) {
 			dbg("Reading ControlReg failed status-0x%x\n", status);
 			break;
 		} else
 			dbg("ControlReg Reading success val is %x, status%d\n",
 			    Data, status);
-		Data |= 0x08;	//setting driver done bit
-		Data |= 0x04;	//sp1_bit to have cts change reflect in modem status reg
+		Data |= 0x08;	/* setting driver done bit */
+		Data |= 0x04;	/* sp1_bit to have cts change reflect in
+				   modem status reg */
 
-		//Data |= 0x20; //rx_disable bit
-		status = 0;
-		status =
-		    mos7840_set_reg_sync(serial->port[i],
+		/* Data |= 0x20; //rx_disable bit */
+		status = mos7840_set_reg_sync(serial->port[i],
 					 mos7840_port->ControlRegOffset, Data);
 		if (status < 0) {
 			dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status);
@@ -2560,13 +2514,11 @@ static int mos7840_startup(struct usb_serial *serial)
 			dbg("ControlReg Writing success(rx_disable) status%d\n",
 			    status);
 
-		//Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3
+		/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
+		   and 0x24 in DCR3 */
 		Data = 0x01;
-		status = 0;
-		status =
-		    mos7840_set_reg_sync(serial->port[i],
-					 (__u16) (mos7840_port->DcrRegOffset +
-						  0), Data);
+		status = mos7840_set_reg_sync(serial->port[i],
+			 (__u16) (mos7840_port->DcrRegOffset + 0), Data);
 		if (status < 0) {
 			dbg("Writing DCR0 failed status-0x%x\n", status);
 			break;
@@ -2574,11 +2526,8 @@ static int mos7840_startup(struct usb_serial *serial)
 			dbg("DCR0 Writing success status%d\n", status);
 
 		Data = 0x05;
-		status = 0;
-		status =
-		    mos7840_set_reg_sync(serial->port[i],
-					 (__u16) (mos7840_port->DcrRegOffset +
-						  1), Data);
+		status = mos7840_set_reg_sync(serial->port[i],
+			 (__u16) (mos7840_port->DcrRegOffset + 1), Data);
 		if (status < 0) {
 			dbg("Writing DCR1 failed status-0x%x\n", status);
 			break;
@@ -2586,22 +2535,17 @@ static int mos7840_startup(struct usb_serial *serial)
 			dbg("DCR1 Writing success status%d\n", status);
 
 		Data = 0x24;
-		status = 0;
-		status =
-		    mos7840_set_reg_sync(serial->port[i],
-					 (__u16) (mos7840_port->DcrRegOffset +
-						  2), Data);
+		status = mos7840_set_reg_sync(serial->port[i],
+			 (__u16) (mos7840_port->DcrRegOffset + 2), Data);
 		if (status < 0) {
 			dbg("Writing DCR2 failed status-0x%x\n", status);
 			break;
 		} else
 			dbg("DCR2 Writing success status%d\n", status);
 
-		// write values in clkstart0x0 and clkmulti 0x20
+		/* write values in clkstart0x0 and clkmulti 0x20 */
 		Data = 0x0;
-		status = 0;
-		status =
-		    mos7840_set_reg_sync(serial->port[i],
+		status = mos7840_set_reg_sync(serial->port[i],
 					 CLK_START_VALUE_REGISTER, Data);
 		if (status < 0) {
 			dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
@@ -2610,9 +2554,8 @@ static int mos7840_startup(struct usb_serial *serial)
 			dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
 
 		Data = 0x20;
-		status =
-		    mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
-					 Data);
+		status = mos7840_set_reg_sync(serial->port[i],
+					CLK_MULTI_REGISTER, Data);
 		if (status < 0) {
 			dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
 			    status);
@@ -2621,11 +2564,10 @@ static int mos7840_startup(struct usb_serial *serial)
 			dbg("CLK_MULTI_REGISTER Writing success status%d\n",
 			    status);
 
-		//write value 0x0 to scratchpad register
+		/* write value 0x0 to scratchpad register */
 		Data = 0x00;
-		status =
-		    mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER,
-					 Data);
+		status = mos7840_set_uart_reg(serial->port[i],
+						SCRATCH_PAD_REGISTER, Data);
 		if (status < 0) {
 			dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n",
 			    status);
@@ -2634,21 +2576,17 @@ static int mos7840_startup(struct usb_serial *serial)
 			dbg("SCRATCH_PAD_REGISTER Writing success status%d\n",
 			    status);
 
-		//Zero Length flag register
+		/* Zero Length flag register */
 		if ((mos7840_port->port_num != 1)
 		    && (serial->num_ports == 2)) {
 
 			Data = 0xff;
-			status = 0;
 			status = mos7840_set_reg_sync(serial->port[i],
-						      (__u16) (ZLP_REG1 +
-							       ((__u16)
-								mos7840_port->
-								port_num)),
-						      Data);
+				      (__u16) (ZLP_REG1 +
+				      ((__u16)mos7840_port->port_num)), Data);
 			dbg("ZLIP offset%x\n",
 			    (__u16) (ZLP_REG1 +
-				     ((__u16) mos7840_port->port_num)));
+					((__u16) mos7840_port->port_num)));
 			if (status < 0) {
 				dbg("Writing ZLP_REG%d failed status-0x%x\n",
 				    i + 2, status);
@@ -2658,13 +2596,9 @@ static int mos7840_startup(struct usb_serial *serial)
 				    i + 2, status);
 		} else {
 			Data = 0xff;
-			status = 0;
 			status = mos7840_set_reg_sync(serial->port[i],
-						      (__u16) (ZLP_REG1 +
-							       ((__u16)
-								mos7840_port->
-								port_num) -
-							       0x1), Data);
+			      (__u16) (ZLP_REG1 +
+			      ((__u16)mos7840_port->port_num) - 0x1), Data);
 			dbg("ZLIP offset%x\n",
 			    (__u16) (ZLP_REG1 +
 				     ((__u16) mos7840_port->port_num) - 0x1));
@@ -2679,14 +2613,16 @@ static int mos7840_startup(struct usb_serial *serial)
 		}
 		mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
 		mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-		mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
-		if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || !mos7840_port->dr) {
+		mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
+								GFP_KERNEL);
+		if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
+							!mos7840_port->dr) {
 			status = -ENOMEM;
 			goto error;
 		}
 	}
 
-	//Zero Length flag enable
+	/* Zero Length flag enable */
 	Data = 0x0f;
 	status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
 	if (status < 0) {
@@ -2729,7 +2665,7 @@ static void mos7840_shutdown(struct usb_serial *serial)
 		return;
 	}
 
-	/*      check for the ports to be closed,close the ports and disconnect         */
+	/* check for the ports to be closed,close the ports and disconnect */
 
 	/* free private structure allocated for serial port  *
 	 * stop reads and writes on all ports                */
@@ -2810,20 +2746,12 @@ static int __init moschip7840_init(void)
 
 	/* Register with the usb */
 	retval = usb_register(&io_driver);
-
-	if (retval)
-		goto failed_usb_register;
-
 	if (retval == 0) {
 		dbg("%s\n", "Leaving...");
 		return 0;
 	}
-
-      failed_usb_register:
 	usb_serial_deregister(&moschip7840_4port_device);
-
-      failed_port_device_register:
-
+failed_port_device_register:
 	return retval;
 }
 
-- 
cgit v1.2.3


From 4da1a17dbc5211ac90264cfc4f0e076c8bdc1732 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:16:21 +0100
Subject: tty-usb-mos7720: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/mos7720.c | 227 ++++++++++++++++++++++---------------------
 1 file changed, 116 insertions(+), 111 deletions(-)

diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index d47f0814ce2..7c4917d77c0 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -33,7 +33,7 @@
 #include <linux/serial_reg.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 
 /*
@@ -64,8 +64,7 @@
 #define URB_TRANSFER_BUFFER_SIZE	32	/* URB Size */
 
 /* This structure holds all of the local port information */
-struct moschip_port
-{
+struct moschip_port {
 	__u8	shadowLCR;		/* last LCR value received */
 	__u8	shadowMCR;		/* last MCR value received */
 	__u8	shadowMSR;		/* last MSR value received */
@@ -76,8 +75,7 @@ struct moschip_port
 };
 
 /* This structure holds all of the individual serial device information */
-struct moschip_serial
-{
+struct moschip_serial {
 	int interrupt_started;
 };
 
@@ -88,7 +86,7 @@ static int debug;
 #define MOSCHIP_DEVICE_ID_7715		0x7715
 
 static struct usb_device_id moschip_port_id_table [] = {
-	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP,MOSCHIP_DEVICE_ID_7720) },
+	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
 	{ } /* terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, moschip_port_id_table);
@@ -108,7 +106,7 @@ static void mos7720_interrupt_callback(struct urb *urb)
 	__u8 sp1;
 	__u8 sp2;
 
-	dbg("%s"," : Entering\n");
+	dbg("%s", " : Entering\n");
 
 	switch (status) {
 	case 0:
@@ -208,7 +206,7 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 
 	mos7720_port = urb->context;
 	if (!mos7720_port) {
-		dbg("%s","NULL mos7720_port pointer \n");
+		dbg("%s", "NULL mos7720_port pointer \n");
 		return ;
 	}
 
@@ -284,17 +282,16 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
 	__u16 size = 0x0000;
 
 	if (value < MOS_MAX_PORT) {
-		if (product == MOSCHIP_DEVICE_ID_7715) {
+		if (product == MOSCHIP_DEVICE_ID_7715)
 			value = value*0x100+0x100;
-		} else {
+		else
 			value = value*0x100+0x200;
-		}
 	} else {
 		value = 0x0000;
 		if ((product == MOSCHIP_DEVICE_ID_7715) &&
 		    (index != 0x08)) {
 			dbg("serial->product== MOSCHIP_DEVICE_ID_7715");
-			//index = 0x01 ;
+			/* index = 0x01 ; */
 		}
 	}
 
@@ -308,20 +305,20 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
 		request = (__u8)MOS_READ;
 		requesttype = (__u8)0xC0;
 		size = 0x01;
-		pipe = usb_rcvctrlpipe(serial->dev,0);
+		pipe = usb_rcvctrlpipe(serial->dev, 0);
 	}
 
 	status = usb_control_msg(serial->dev, pipe, request, requesttype,
 				 value, index, data, size, MOS_WDR_TIMEOUT);
 
 	if (status < 0)
-		dbg("Command Write failed Value %x index %x\n",value,index);
+		dbg("Command Write failed Value %x index %x\n", value, index);
 
 	return status;
 }
 
 static int mos7720_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial;
 	struct usb_serial_port *port0;
@@ -352,7 +349,7 @@ static int mos7720_open(struct tty_struct *tty,
 
 	/* Initialising the write urb pool */
 	for (j = 0; j < NUM_URBS; ++j) {
-		urb = usb_alloc_urb(0,GFP_KERNEL);
+		urb = usb_alloc_urb(0, GFP_KERNEL);
 		mos7720_port->write_urb_pool[j] = urb;
 
 		if (urb == NULL) {
@@ -386,7 +383,7 @@ static int mos7720_open(struct tty_struct *tty,
 	  */
 	port_number = port->number - port->serial->minor;
 	send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
-	dbg("SS::%p LSR:%x\n",mos7720_port, data);
+	dbg("SS::%p LSR:%x\n", mos7720_port, data);
 
 	dbg("Check:Sending Command ..........");
 
@@ -403,10 +400,10 @@ static int mos7720_open(struct tty_struct *tty,
 	data = 0xCF;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
 	data = 0x03;
-        mos7720_port->shadowLCR  = data;
+	mos7720_port->shadowLCR  = data;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
 	data = 0x0b;
-        mos7720_port->shadowMCR  = data;
+	mos7720_port->shadowMCR  = data;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
 	data = 0x0b;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
@@ -421,7 +418,8 @@ static int mos7720_open(struct tty_struct *tty,
 	data = 0x03;
 	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
 	data = 0x00;
-	send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
+	send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT,
+						port_number + 1, &data);
 */
 	data = 0x00;
 	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
@@ -430,14 +428,14 @@ static int mos7720_open(struct tty_struct *tty,
 	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
 
 	data = 0x83;
-        mos7720_port->shadowLCR  = data;
+	mos7720_port->shadowLCR  = data;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
 	data = 0x0c;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
 	data = 0x00;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
 	data = 0x03;
-        mos7720_port->shadowLCR  = data;
+	mos7720_port->shadowLCR  = data;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
 	data = 0x0c;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
@@ -464,15 +462,15 @@ static int mos7720_open(struct tty_struct *tty,
 
 		/* set up our interrupt urb */
 		usb_fill_int_urb(port0->interrupt_in_urb, serial->dev,
-				 usb_rcvintpipe(serial->dev,
-				 		port->interrupt_in_endpointAddress),
-				 port0->interrupt_in_buffer,
-				 port0->interrupt_in_urb->transfer_buffer_length,
-				 mos7720_interrupt_callback, mos7720_port,
-				 port0->interrupt_in_urb->interval);
+			 usb_rcvintpipe(serial->dev,
+				port->interrupt_in_endpointAddress),
+			 port0->interrupt_in_buffer,
+			 port0->interrupt_in_urb->transfer_buffer_length,
+			 mos7720_interrupt_callback, mos7720_port,
+			 port0->interrupt_in_urb->interval);
 
 		/* start interrupt read for this mos7720 this interrupt *
-	         * will continue as long as the mos7720 is connected    */
+		 * will continue as long as the mos7720 is connected    */
 		dbg("Submit URB over !!!");
 		response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL);
 		if (response)
@@ -484,14 +482,14 @@ static int mos7720_open(struct tty_struct *tty,
 	/* set up our bulk in urb */
 	usb_fill_bulk_urb(port->read_urb, serial->dev,
 			  usb_rcvbulkpipe(serial->dev,
-			  		  port->bulk_in_endpointAddress),
+				port->bulk_in_endpointAddress),
 			  port->bulk_in_buffer,
 			  port->read_urb->transfer_buffer_length,
 			  mos7720_bulk_in_callback, mos7720_port);
 	response = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (response)
-		dev_err(&port->dev,
-			"%s - Error %d submitting read urb\n", __func__, response);
+		dev_err(&port->dev, "%s - Error %d submitting read urb\n",
+							__func__, response);
 
 	/* initialize our icount structure */
 	memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount));
@@ -530,7 +528,8 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty)
 	}
 
 	for (i = 0; i < NUM_URBS; ++i) {
-		if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
+		if (mos7720_port->write_urb_pool[i] &&
+		    mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
 			chars += URB_TRANSFER_BUFFER_SIZE;
 	}
 	dbg("%s - returns %d", __func__, chars);
@@ -576,12 +575,12 @@ static void mos7720_close(struct tty_struct *tty,
 	 * been disconnected */
 	if (!serial->disconnected) {
 		data = 0x00;
-		send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
-			     0x04, &data);
+		send_mos_cmd(serial, MOS_WRITE,
+			port->number - port->serial->minor, 0x04, &data);
 
 		data = 0x00;
-		send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
-			     0x01, &data);
+		send_mos_cmd(serial, MOS_WRITE,
+			port->number - port->serial->minor, 0x01, &data);
 	}
 	mutex_unlock(&serial->disc_mutex);
 	mos7720_port->open = 0;
@@ -592,7 +591,7 @@ static void mos7720_close(struct tty_struct *tty,
 static void mos7720_break(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
-        unsigned char data;
+	unsigned char data;
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
 
@@ -640,7 +639,8 @@ static int mos7720_write_room(struct tty_struct *tty)
 
 	/* FIXME: Locking */
 	for (i = 0; i < NUM_URBS; ++i) {
-		if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS)
+		if (mos7720_port->write_urb_pool[i] &&
+		    mos7720_port->write_urb_pool[i]->status != -EINPROGRESS)
 			room += URB_TRANSFER_BUFFER_SIZE;
 	}
 
@@ -675,9 +675,10 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 	urb = NULL;
 
 	for (i = 0; i < NUM_URBS; ++i) {
-		if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) {
+		if (mos7720_port->write_urb_pool[i] &&
+		    mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) {
 			urb = mos7720_port->write_urb_pool[i];
-			dbg("URB:%d",i);
+			dbg("URB:%d", i);
 			break;
 		}
 	}
@@ -695,7 +696,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 			goto exit;
 		}
 	}
-	transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE);
+	transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
 
 	memcpy(urb->transfer_buffer, current_position, transfer_size);
 	usb_serial_debug_data(debug, &port->dev, __func__, transfer_size,
@@ -704,12 +705,12 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* fill urb with data and submit  */
 	usb_fill_bulk_urb(urb, serial->dev,
 			  usb_sndbulkpipe(serial->dev,
-			  		  port->bulk_out_endpointAddress),
+					port->bulk_out_endpointAddress),
 			  urb->transfer_buffer, transfer_size,
 			  mos7720_bulk_out_data_callback, mos7720_port);
 
 	/* send it down the pipe */
-	status = usb_submit_urb(urb,GFP_ATOMIC);
+	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		err("%s - usb_submit_urb(write bulk) failed with status = %d",
 		    __func__, status);
@@ -810,9 +811,9 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	port = mos7720_port->port;
 	serial = port->serial;
 
-        /***********************************************
-         *      Init Sequence for higher rates
-         ***********************************************/
+	 /***********************************************
+	 *      Init Sequence for higher rates
+	 ***********************************************/
 	dbg("Sending Setting Commands ..........");
 	port_number = port->number - port->serial->minor;
 
@@ -823,7 +824,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	data = 0x0CF;
 	send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data);
 	data = 0x00b;
-        mos7720_port->shadowMCR  = data;
+	mos7720_port->shadowMCR  = data;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
 	data = 0x00b;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
@@ -834,12 +835,12 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
 
 
-        /***********************************************
-         *              Set for higher rates           *
-         ***********************************************/
+	/***********************************************
+	 *              Set for higher rates           *
+	 ***********************************************/
 
 	data = baud * 0x10;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1,&data);
+	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
 
 	data = 0x003;
 	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
@@ -847,34 +848,33 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
 
 	data = 0x02b;
-        mos7720_port->shadowMCR  = data;
+	mos7720_port->shadowMCR  = data;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
 	data = 0x02b;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
 
-        /***********************************************
-         *              Set DLL/DLM
-         ***********************************************/
+	/***********************************************
+	 *              Set DLL/DLM
+	 ***********************************************/
 
 	data = mos7720_port->shadowLCR | UART_LCR_DLAB;
-        mos7720_port->shadowLCR  = data;
+	mos7720_port->shadowLCR  = data;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
 
 	data =  0x001; /* DLL */
-        send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
+	send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
 	data =  0x000; /* DLM */
-        send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
+	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
 
 	data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
-        mos7720_port->shadowLCR  = data;
+	mos7720_port->shadowLCR  = data;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
 
 	return 0;
 }
 
 /* baud rate information */
-struct divisor_table_entry
-{
+struct divisor_table_entry {
 	__u32  baudrate;
 	__u16  divisor;
 };
@@ -923,8 +923,8 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
 		}
 	}
 
-        /* After trying for all the standard baud rates    *
-         * Try calculating the divisor for this baud rate  */
+	/* After trying for all the standard baud rates    *
+	 * Try calculating the divisor for this baud rate  */
 	if (baudrate > 75 &&  baudrate < 230400) {
 		/* get the divisor */
 		custom = (__u16)(230400L  / baudrate);
@@ -936,7 +936,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
 			custom++;
 		*divisor = custom;
 
-		dbg("Baud %d = %d",baudrate, custom);
+		dbg("Baud %d = %d", baudrate, custom);
 		return 0;
 	}
 
@@ -970,29 +970,29 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
 	number = port->number - port->serial->minor;
 	dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate);
 
-        /* Calculate the Divisor */
+	/* Calculate the Divisor */
 	status = calc_baud_rate_divisor(baudrate, &divisor);
 	if (status) {
 		err("%s - bad baud rate", __func__);
 		return status;
 	}
 
-        /* Enable access to divisor latch */
-        data = mos7720_port->shadowLCR | UART_LCR_DLAB;
-        mos7720_port->shadowLCR  = data;
-        send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data);
+	/* Enable access to divisor latch */
+	data = mos7720_port->shadowLCR | UART_LCR_DLAB;
+	mos7720_port->shadowLCR  = data;
+	send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data);
 
 	/* Write the divisor */
 	data = ((unsigned char)(divisor & 0xff));
-        send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data);
+	send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data);
 
 	data = ((unsigned char)((divisor & 0xff00) >> 8));
-        send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data);
+	send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data);
 
-        /* Disable access to divisor latch */
-        data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
-        mos7720_port->shadowLCR = data;
-        send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data);
+	/* Disable access to divisor latch */
+	data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
+	mos7720_port->shadowLCR = data;
+	send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data);
 
 	return status;
 }
@@ -1095,29 +1095,31 @@ static void change_port_settings(struct tty_struct *tty,
 #define LCR_PAR_MASK		0x38	/* Mask for parity field */
 
 	/* Update the LCR with the correct value */
-	mos7720_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
+	mos7720_port->shadowLCR &=
+			~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
 	mos7720_port->shadowLCR |= (lData | lParity | lStop);
 
 
 	/* Disable Interrupts */
 	data = 0x00;
-        send_mos_cmd(serial,MOS_WRITE,port->number - port->serial->minor, UART_IER, &data);
+	send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
+							UART_IER, &data);
 
 	data = 0x00;
-        send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
+	send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
 
 	data = 0xcf;
-        send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
+	send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
 
 	/* Send the updated LCR value to the mos7720 */
 	data = mos7720_port->shadowLCR;
-        send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data);
+	send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data);
 
-        data = 0x00b;
-        mos7720_port->shadowMCR = data;
-        send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-        data = 0x00b;
-        send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
+	data = 0x00b;
+	mos7720_port->shadowMCR = data;
+	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
+	data = 0x00b;
+	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
 
 	/* set up the MCR register and send it to the mos7720 */
 	mos7720_port->shadowMCR = UART_MCR_OUT2;
@@ -1126,9 +1128,8 @@ static void change_port_settings(struct tty_struct *tty,
 
 	if (cflag & CRTSCTS) {
 		mos7720_port->shadowMCR |= (UART_MCR_XONANY);
-
-                /* To set hardware flow control to the specified *
-                 * serial port, in SP1/2_CONTROL_REG             */
+		/* To set hardware flow control to the specified *
+		 * serial port, in SP1/2_CONTROL_REG             */
 		if (port->number) {
 			data = 0x001;
 			send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
@@ -1207,7 +1208,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	dbg("%s\n","setting termios - ASPIRE");
+	dbg("%s\n", "setting termios - ASPIRE");
 
 	cflag = tty->termios->c_cflag;
 
@@ -1224,12 +1225,12 @@ static void mos7720_set_termios(struct tty_struct *tty,
 	/* change the port settings to the new ones specified */
 	change_port_settings(tty, mos7720_port, old_termios);
 
-	if(!port->read_urb) {
-		dbg("%s","URB KILLED !!!!!\n");
+	if (!port->read_urb) {
+		dbg("%s", "URB KILLED !!!!!\n");
 		return;
 	}
 
-	if(port->read_urb->status != -EINPROGRESS) {
+	if (port->read_urb->status != -EINPROGRESS) {
 		port->read_urb->dev = serial->dev;
 		status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (status)
@@ -1249,8 +1250,8 @@ static void mos7720_set_termios(struct tty_struct *tty,
  * 	    transmit holding register is empty.  This functionality
  * 	    allows an RS485 driver to be written in user space.
  */
-static int get_lsr_info(struct tty_struct *tty, struct moschip_port *mos7720_port,
-			unsigned int __user *value)
+static int get_lsr_info(struct tty_struct *tty,
+		struct moschip_port *mos7720_port, unsigned int __user *value)
 {
 	int count;
 	unsigned int result = 0;
@@ -1301,7 +1302,7 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 	if (mos7720_port == NULL)
 		return -1;
 
-	port = (struct usb_serial_port*)mos7720_port->port;
+	port = (struct usb_serial_port *)mos7720_port->port;
 	mcr = mos7720_port->shadowMCR;
 
 	if (copy_from_user(&arg, value, sizeof(int)))
@@ -1382,7 +1383,7 @@ static int get_serial_info(struct moschip_port *mos7720_port,
 	tmp.port		= mos7720_port->port->number;
 	tmp.irq			= 0;
 	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
-        tmp.xmit_fifo_size	= NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
+	tmp.xmit_fifo_size	= NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
 	tmp.closing_wait	= 30*HZ;
@@ -1417,15 +1418,16 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 
 	case TIOCSERGETLSR:
 		dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
-		return get_lsr_info(tty, mos7720_port, (unsigned int __user *)arg);
+		return get_lsr_info(tty, mos7720_port,
+					(unsigned int __user *)arg);
 		return 0;
 
 	/* FIXME: These should be using the mode methods */
 	case TIOCMBIS:
 	case TIOCMBIC:
 	case TIOCMSET:
-		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
-		    port->number);
+		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET",
+					__func__, port->number);
 		return set_modem_info(mos7720_port, cmd,
 				      (unsigned int __user *)arg);
 
@@ -1452,7 +1454,7 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
 			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
 			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
+			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
 				return 0;
 			}
 			cprev = cnow;
@@ -1475,7 +1477,7 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 		icount.buf_overrun = cnow.buf_overrun;
 
 		dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
-		    port->number, icount.rx, icount.tx );
+		    port->number, icount.rx, icount.tx);
 		if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
 			return -EFAULT;
 		return 0;
@@ -1526,7 +1528,8 @@ static int mos7720_startup(struct usb_serial *serial)
 		/* Initialize all port interrupt end point to port 0 int
 		 * endpoint.  Our device has only one interrupt endpoint
 		 * comman to all ports */
-		serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress;
+		serial->port[i]->interrupt_in_endpointAddress =
+				serial->port[0]->interrupt_in_endpointAddress;
 
 		mos7720_port->port = serial->port[i];
 		usb_set_serial_port_data(serial->port[i], mos7720_port);
@@ -1538,13 +1541,15 @@ static int mos7720_startup(struct usb_serial *serial)
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8)0x03, 0x00,0x01,0x00, NULL, 0x00, 5*HZ);
+			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
 
-	send_mos_cmd(serial,MOS_READ,0x00, UART_LSR, &data);  // LSR For Port 1
-	dbg("LSR:%x",data);
+	/* LSR For Port 1 */
+	send_mos_cmd(serial, MOS_READ, 0x00, UART_LSR, &data);
+	dbg("LSR:%x", data);
 
-	send_mos_cmd(serial,MOS_READ,0x01, UART_LSR, &data);  // LSR For Port 2
-	dbg("LSR:%x",data);
+	/* LSR For Port 2 */
+	send_mos_cmd(serial, MOS_READ, 0x01, UART_LSR, &data);
+	dbg("LSR:%x", data);
 
 	return 0;
 }
@@ -1554,7 +1559,7 @@ static void mos7720_shutdown(struct usb_serial *serial)
 	int i;
 
 	/* free private structure allocated for serial port */
-	for (i=0; i < serial->num_ports; ++i) {
+	for (i = 0; i < serial->num_ports; ++i) {
 		kfree(usb_get_serial_port_data(serial->port[i]));
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -1634,8 +1639,8 @@ module_init(moschip7720_init);
 module_exit(moschip7720_exit);
 
 /* Module information */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
-- 
cgit v1.2.3


From 03f0dbf74c7a117c270e63d62d5e4927af6f295b Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:16:34 +0100
Subject: tty-usb-io_edgeport: Coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/io_edgeport.c | 1823 +++++++++++++++++++++-----------------
 drivers/usb/serial/io_tables.h   |    6 +-
 2 files changed, 1023 insertions(+), 806 deletions(-)

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 29346d79df7..b4bd6847a96 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -44,7 +44,7 @@
 #include <linux/wait.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "io_edgeport.h"
@@ -66,16 +66,16 @@
 
 /* receive port state */
 enum RXSTATE {
-	EXPECT_HDR1 = 0,	/* Expect header byte 1 */
-	EXPECT_HDR2 = 1,	/* Expect header byte 2 */
-	EXPECT_DATA = 2,	/* Expect 'RxBytesRemaining' data */
-	EXPECT_HDR3 = 3,	/* Expect header byte 3 (for status hdrs only) */
+	EXPECT_HDR1 = 0,    /* Expect header byte 1 */
+	EXPECT_HDR2 = 1,    /* Expect header byte 2 */
+	EXPECT_DATA = 2,    /* Expect 'RxBytesRemaining' data */
+	EXPECT_HDR3 = 3,    /* Expect header byte 3 (for status hdrs only) */
 };
 
 
-/* Transmit Fifo 
- * This Transmit queue is an extension of the edgeport Rx buffer. 
- * The maximum amount of data buffered in both the edgeport 
+/* Transmit Fifo
+ * This Transmit queue is an extension of the edgeport Rx buffer.
+ * The maximum amount of data buffered in both the edgeport
  * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits.
  */
 struct TxFifo {
@@ -132,12 +132,12 @@ struct edgeport_serial {
 	int			is_epic;			/* flag if EPiC device or not */
 
 	__u8			interrupt_in_endpoint;		/* the interrupt endpoint handle */
-	unsigned char *		interrupt_in_buffer;		/* the buffer we use for the interrupt endpoint */
-	struct urb *		interrupt_read_urb;		/* our interrupt urb */
+	unsigned char		*interrupt_in_buffer;		/* the buffer we use for the interrupt endpoint */
+	struct urb		*interrupt_read_urb;		/* our interrupt urb */
 
 	__u8			bulk_in_endpoint;		/* the bulk in endpoint handle */
-	unsigned char *		bulk_in_buffer;			/* the buffer we use for the bulk in endpoint */
-	struct urb *		read_urb;			/* our bulk read urb */
+	unsigned char		*bulk_in_buffer;		/* the buffer we use for the bulk in endpoint */
+	struct urb		*read_urb;			/* our bulk read urb */
 	bool			read_in_progress;
 	spinlock_t		es_lock;
 
@@ -162,16 +162,17 @@ struct divisor_table_entry {
 	__u16  Divisor;
 };
 
-//
-// Define table of divisors for Rev A EdgePort/4 hardware
-// These assume a 3.6864MHz crystal, the standard /16, and
-// MCR.7 = 0.
-//
+/*
+ * Define table of divisors for Rev A EdgePort/4 hardware
+ * These assume a 3.6864MHz crystal, the standard /16, and
+ * MCR.7 = 0.
+ */
+
 static const struct divisor_table_entry divisor_table[] = {
-	{   50,		4608},  
-	{   75,		3072},  
-	{   110,	2095},		/* 2094.545455 => 230450   => .0217 % over */
-	{   134,	1713},		/* 1713.011152 => 230398.5 => .00065% under */
+	{   50,		4608},
+	{   75,		3072},
+	{   110,	2095},	/* 2094.545455 => 230450   => .0217 % over */
+	{   134,	1713},	/* 1713.011152 => 230398.5 => .00065% under */
 	{   150,	1536},
 	{   300,	768},
 	{   600,	384},
@@ -194,65 +195,86 @@ static int debug;
 
 static int low_latency = 1;	/* tty low latency flag, on by default */
 
-static atomic_t CmdUrbs;		/* Number of outstanding Command Write Urbs */
+static atomic_t CmdUrbs;	/* Number of outstanding Command Write Urbs */
 
 
 /* local function prototypes */
 
 /* function prototypes for all URB callbacks */
-static void edge_interrupt_callback	(struct urb *urb);
-static void edge_bulk_in_callback	(struct urb *urb);
-static void edge_bulk_out_data_callback	(struct urb *urb);
-static void edge_bulk_out_cmd_callback	(struct urb *urb);
+static void edge_interrupt_callback(struct urb *urb);
+static void edge_bulk_in_callback(struct urb *urb);
+static void edge_bulk_out_data_callback(struct urb *urb);
+static void edge_bulk_out_cmd_callback(struct urb *urb);
 
 /* function prototypes for the usbserial callbacks */
-static int  edge_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void edge_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int  edge_write			(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  edge_write_room		(struct tty_struct *tty);
-static int  edge_chars_in_buffer	(struct tty_struct *tty);
-static void edge_throttle		(struct tty_struct *tty);
-static void edge_unthrottle		(struct tty_struct *tty);
-static void edge_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios);
-static int  edge_ioctl			(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
-static void edge_break			(struct tty_struct *tty, int break_state);
-static int  edge_tiocmget		(struct tty_struct *tty, struct file *file);
-static int  edge_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
-static int  edge_startup		(struct usb_serial *serial);
-static void edge_shutdown		(struct usb_serial *serial);
-
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filp);
+static void edge_close(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filp);
+static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count);
+static int edge_write_room(struct tty_struct *tty);
+static int edge_chars_in_buffer(struct tty_struct *tty);
+static void edge_throttle(struct tty_struct *tty);
+static void edge_unthrottle(struct tty_struct *tty);
+static void edge_set_termios(struct tty_struct *tty,
+					struct usb_serial_port *port,
+					struct ktermios *old_termios);
+static int  edge_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg);
+static void edge_break(struct tty_struct *tty, int break_state);
+static int  edge_tiocmget(struct tty_struct *tty, struct file *file);
+static int  edge_tiocmset(struct tty_struct *tty, struct file *file,
+					unsigned int set, unsigned int clear);
+static int  edge_startup(struct usb_serial *serial);
+static void edge_shutdown(struct usb_serial *serial);
 
 #include "io_tables.h"	/* all of the devices that this driver supports */
 
 /* function prototypes for all of our local functions */
-static void  process_rcvd_data		(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength);
-static void process_rcvd_status		(struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3);
-static void edge_tty_recv			(struct device *dev, struct tty_struct *tty, unsigned char *data, int length);
-static void handle_new_msr		(struct edgeport_port *edge_port, __u8 newMsr);
-static void handle_new_lsr		(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data);
-static int  send_iosp_ext_cmd		(struct edgeport_port *edge_port, __u8 command, __u8 param);
-static int  calc_baud_rate_divisor	(int baud_rate, int *divisor);
-static int  send_cmd_write_baud_rate	(struct edgeport_port *edge_port, int baudRate);
-static void change_port_settings	(struct tty_struct *tty, struct edgeport_port *edge_port,
-					 struct ktermios *old_termios);
-static int  send_cmd_write_uart_register	(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue);
-static int  write_cmd_usb		(struct edgeport_port *edge_port, unsigned char *buffer, int writeLength);
-static void send_more_port_data		(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port);
-
-static int  sram_write			(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data);
-static int  rom_read			(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data);
-static int  rom_write			(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data);
-static void get_manufacturing_desc	(struct edgeport_serial *edge_serial);
-static void get_boot_desc		(struct edgeport_serial *edge_serial);
-static void load_application_firmware	(struct edgeport_serial *edge_serial);
-
-static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size);
-
-
-// ************************************************************************
-// ************************************************************************
-// ************************************************************************
-// ************************************************************************
+
+static void  process_rcvd_data(struct edgeport_serial *edge_serial,
+				unsigned char *buffer, __u16 bufferLength);
+static void process_rcvd_status(struct edgeport_serial *edge_serial,
+				__u8 byte2, __u8 byte3);
+static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
+				unsigned char *data, int length);
+static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr);
+static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
+				__u8 lsr, __u8 data);
+static int  send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command,
+				__u8 param);
+static int  calc_baud_rate_divisor(int baud_rate, int *divisor);
+static int  send_cmd_write_baud_rate(struct edgeport_port *edge_port,
+				int baudRate);
+static void change_port_settings(struct tty_struct *tty,
+				struct edgeport_port *edge_port,
+				struct ktermios *old_termios);
+static int  send_cmd_write_uart_register(struct edgeport_port *edge_port,
+				__u8 regNum, __u8 regValue);
+static int  write_cmd_usb(struct edgeport_port *edge_port,
+				unsigned char *buffer, int writeLength);
+static void send_more_port_data(struct edgeport_serial *edge_serial,
+				struct edgeport_port *edge_port);
+
+static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+					__u16 length, const __u8 *data);
+static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+						__u16 length, __u8 *data);
+static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+					__u16 length, const __u8 *data);
+static void get_manufacturing_desc(struct edgeport_serial *edge_serial);
+static void get_boot_desc(struct edgeport_serial *edge_serial);
+static void load_application_firmware(struct edgeport_serial *edge_serial);
+
+static void unicode_to_ascii(char *string, int buflen,
+				__le16 *unicode, int unicode_size);
+
+
+/* ************************************************************************ */
+/* ************************************************************************ */
+/* ************************************************************************ */
+/* ************************************************************************ */
 
 /************************************************************************
  *									*
@@ -262,7 +284,7 @@ static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unic
  *				embedded in this driver			*
  *									*
  ************************************************************************/
-static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial)
+static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 {
 	__u32 BootCurVer;
 	__u32 BootNewVer;
@@ -276,16 +298,14 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial)
 	int response;
 
 	switch (edge_serial->product_info.iDownloadFile) {
-		case EDGE_DOWNLOAD_FILE_I930:
-			fw_name	= "edgeport/boot.fw";
-			break;
-
-		case EDGE_DOWNLOAD_FILE_80251:
-			fw_name	= "edgeport/boot2.fw";
-			break;
-
-		default:
-			return;
+	case EDGE_DOWNLOAD_FILE_I930:
+		fw_name	= "edgeport/boot.fw";
+		break;
+	case EDGE_DOWNLOAD_FILE_80251:
+		fw_name	= "edgeport/boot2.fw";
+		break;
+	default:
+		return;
 	}
 
 	response = request_ihex_firmware(&fw, fw_name,
@@ -301,7 +321,7 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial)
 	BootMinorVersion = rec->data[1];
 	BootBuildNumber = (rec->data[2] << 8) | rec->data[3];
 
-	// Check Boot Image Version
+	/* Check Boot Image Version */
 	BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) +
 		     (edge_serial->boot_descriptor.MinorVersion << 16) +
 		      le16_to_cpu(edge_serial->boot_descriptor.BuildNumber);
@@ -353,29 +373,29 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial)
  *  Get string descriptor from device					*
  *									*
  ************************************************************************/
-static int get_string (struct usb_device *dev, int Id, char *string, int buflen)
+static int get_string(struct usb_device *dev, int Id, char *string, int buflen)
 {
 	struct usb_string_descriptor StringDesc;
 	struct usb_string_descriptor *pStringDesc;
 
-	dbg("%s - USB String ID = %d", __func__, Id );
+	dbg("%s - USB String ID = %d", __func__, Id);
 
-	if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
+	if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
+					&StringDesc, sizeof(StringDesc)))
 		return 0;
-	}
-
-	pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL);
 
-	if (!pStringDesc) {
+	pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
+	if (!pStringDesc)
 		return 0;
-	}
 
-	if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) {
+	if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
+					pStringDesc, StringDesc.bLength)) {
 		kfree(pStringDesc);
 		return 0;
 	}
 
-	unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2);
+	unicode_to_ascii(string, buflen,
+				pStringDesc->wData, pStringDesc->bLength/2);
 
 	kfree(pStringDesc);
 	dbg("%s - USB String %s", __func__, string);
@@ -389,24 +409,24 @@ static int get_string (struct usb_device *dev, int Id, char *string, int buflen)
  *  Get string descriptor from device
  *
  ************************************************************************/
-static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_descriptor **pRetDesc)
+static int get_string_desc(struct usb_device *dev, int Id,
+				struct usb_string_descriptor **pRetDesc)
 {
 	struct usb_string_descriptor StringDesc;
 	struct usb_string_descriptor *pStringDesc;
 
-	dbg("%s - USB String ID = %d", __func__, Id );
+	dbg("%s - USB String ID = %d", __func__, Id);
 
-	if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
+	if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc,
+						sizeof(StringDesc)))
 		return 0;
-	}
-
-	pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL);
 
-	if (!pStringDesc) {
+	pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
+	if (!pStringDesc)
 		return -1;
-	}
 
-	if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) {
+	if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc,
+							StringDesc.bLength)) {
 		kfree(pStringDesc);
 		return -1;
 	}
@@ -418,25 +438,30 @@ static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_de
 
 static void dump_product_info(struct edgeport_product_info *product_info)
 {
-	// Dump Product Info structure
+	/* Dump Product Info structure */
 	dbg("**Product Information:");
-	dbg("  ProductId             %x", product_info->ProductId );
-	dbg("  NumPorts              %d", product_info->NumPorts );
-	dbg("  ProdInfoVer           %d", product_info->ProdInfoVer );
+	dbg("  ProductId             %x", product_info->ProductId);
+	dbg("  NumPorts              %d", product_info->NumPorts);
+	dbg("  ProdInfoVer           %d", product_info->ProdInfoVer);
 	dbg("  IsServer              %d", product_info->IsServer);
-	dbg("  IsRS232               %d", product_info->IsRS232 );
-	dbg("  IsRS422               %d", product_info->IsRS422 );
-	dbg("  IsRS485               %d", product_info->IsRS485 );
-	dbg("  RomSize               %d", product_info->RomSize );
-	dbg("  RamSize               %d", product_info->RamSize );
-	dbg("  CpuRev                %x", product_info->CpuRev  );
+	dbg("  IsRS232               %d", product_info->IsRS232);
+	dbg("  IsRS422               %d", product_info->IsRS422);
+	dbg("  IsRS485               %d", product_info->IsRS485);
+	dbg("  RomSize               %d", product_info->RomSize);
+	dbg("  RamSize               %d", product_info->RamSize);
+	dbg("  CpuRev                %x", product_info->CpuRev);
 	dbg("  BoardRev              %x", product_info->BoardRev);
 	dbg("  BootMajorVersion      %d.%d.%d", product_info->BootMajorVersion,
 	    product_info->BootMinorVersion,
 	    le16_to_cpu(product_info->BootBuildNumber));
-	dbg("  ManufactureDescDate   %d/%d/%d", product_info->ManufactureDescDate[0],
-	    product_info->ManufactureDescDate[1],
-	    product_info->ManufactureDescDate[2]+1900);
+	dbg("  FirmwareMajorVersion  %d.%d.%d",
+			product_info->FirmwareMajorVersion,
+			product_info->FirmwareMinorVersion,
+			le16_to_cpu(product_info->FirmwareBuildNumber));
+	dbg("  ManufactureDescDate   %d/%d/%d",
+			product_info->ManufactureDescDate[0],
+			product_info->ManufactureDescDate[1],
+			product_info->ManufactureDescDate[2]+1900);
 	dbg("  iDownloadFile         0x%x", product_info->iDownloadFile);
 	dbg("  EpicVer               %d", product_info->EpicVer);
 }
@@ -445,55 +470,60 @@ static void get_product_info(struct edgeport_serial *edge_serial)
 {
 	struct edgeport_product_info *product_info = &edge_serial->product_info;
 
-	memset (product_info, 0, sizeof(struct edgeport_product_info));
-
-	product_info->ProductId		= (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
-	product_info->NumPorts		= edge_serial->manuf_descriptor.NumPorts;
-	product_info->ProdInfoVer	= 0;
-
-	product_info->RomSize		= edge_serial->manuf_descriptor.RomSize;
-	product_info->RamSize		= edge_serial->manuf_descriptor.RamSize;
-	product_info->CpuRev		= edge_serial->manuf_descriptor.CpuRev;
-	product_info->BoardRev		= edge_serial->manuf_descriptor.BoardRev;
-
-	product_info->BootMajorVersion	= edge_serial->boot_descriptor.MajorVersion;
-	product_info->BootMinorVersion	= edge_serial->boot_descriptor.MinorVersion;
-	product_info->BootBuildNumber	= edge_serial->boot_descriptor.BuildNumber;
-
-	memcpy(product_info->ManufactureDescDate, edge_serial->manuf_descriptor.DescDate, sizeof(edge_serial->manuf_descriptor.DescDate));
-
-	// check if this is 2nd generation hardware
-	if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ION_DEVICE_ID_80251_NETCHIP) {
-		product_info->iDownloadFile		= EDGE_DOWNLOAD_FILE_80251;
-	} else {
-		product_info->iDownloadFile		= EDGE_DOWNLOAD_FILE_I930;
-	}
-
-	// Determine Product type and set appropriate flags
+	memset(product_info, 0, sizeof(struct edgeport_product_info));
+
+	product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
+	product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts;
+	product_info->ProdInfoVer = 0;
+
+	product_info->RomSize = edge_serial->manuf_descriptor.RomSize;
+	product_info->RamSize = edge_serial->manuf_descriptor.RamSize;
+	product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev;
+	product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev;
+
+	product_info->BootMajorVersion =
+				edge_serial->boot_descriptor.MajorVersion;
+	product_info->BootMinorVersion =
+				edge_serial->boot_descriptor.MinorVersion;
+	product_info->BootBuildNumber =
+				edge_serial->boot_descriptor.BuildNumber;
+
+	memcpy(product_info->ManufactureDescDate,
+			edge_serial->manuf_descriptor.DescDate,
+			sizeof(edge_serial->manuf_descriptor.DescDate));
+
+	/* check if this is 2nd generation hardware */
+	if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct)
+					    & ION_DEVICE_ID_80251_NETCHIP)
+		product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
+	else
+		product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
+ 
+	/* Determine Product type and set appropriate flags */
 	switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
-		case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
-		case ION_DEVICE_ID_EDGEPORT_4T:
-		case ION_DEVICE_ID_EDGEPORT_4:
-		case ION_DEVICE_ID_EDGEPORT_2:
-		case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
-		case ION_DEVICE_ID_EDGEPORT_8:
-		case ION_DEVICE_ID_EDGEPORT_421:
-		case ION_DEVICE_ID_EDGEPORT_21:
-		case ION_DEVICE_ID_EDGEPORT_2_DIN:
-		case ION_DEVICE_ID_EDGEPORT_4_DIN:
-		case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
-			product_info->IsRS232 = 1;
-			break;
+	case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
+	case ION_DEVICE_ID_EDGEPORT_4T:
+	case ION_DEVICE_ID_EDGEPORT_4:
+	case ION_DEVICE_ID_EDGEPORT_2:
+	case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
+	case ION_DEVICE_ID_EDGEPORT_8:
+	case ION_DEVICE_ID_EDGEPORT_421:
+	case ION_DEVICE_ID_EDGEPORT_21:
+	case ION_DEVICE_ID_EDGEPORT_2_DIN:
+	case ION_DEVICE_ID_EDGEPORT_4_DIN:
+	case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
+		product_info->IsRS232 = 1;
+		break;
 
-		case ION_DEVICE_ID_EDGEPORT_2I:				   // Edgeport/2 RS422/RS485
-			product_info->IsRS422 = 1;
-			product_info->IsRS485 = 1;
-			break;
+	case ION_DEVICE_ID_EDGEPORT_2I:	/* Edgeport/2 RS422/RS485 */
+		product_info->IsRS422 = 1;
+		product_info->IsRS485 = 1;
+		break;
 
-		case ION_DEVICE_ID_EDGEPORT_8I:				   // Edgeport/4 RS422
-		case ION_DEVICE_ID_EDGEPORT_4I:				   // Edgeport/4 RS422
-			product_info->IsRS422 = 1;
-			break;
+	case ION_DEVICE_ID_EDGEPORT_8I:	/* Edgeport/4 RS422 */
+	case ION_DEVICE_ID_EDGEPORT_4I:	/* Edgeport/4 RS422 */
+		product_info->IsRS422 = 1;
+		break;
 	}
 
 	dump_product_info(product_info);
@@ -521,32 +551,32 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
 		ep->is_epic = 1;
 		memset(product_info, 0, sizeof(struct edgeport_product_info));
 
-		product_info->NumPorts			= epic->NumPorts;
-		product_info->ProdInfoVer		= 0;
-		product_info->FirmwareMajorVersion	= epic->MajorVersion;
-		product_info->FirmwareMinorVersion	= epic->MinorVersion;
-		product_info->FirmwareBuildNumber	= epic->BuildNumber;
-		product_info->iDownloadFile		= epic->iDownloadFile;
-		product_info->EpicVer			= epic->EpicVer;
-		product_info->Epic			= epic->Supports;
-		product_info->ProductId			= ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
+		product_info->NumPorts = epic->NumPorts;
+		product_info->ProdInfoVer = 0;
+		product_info->FirmwareMajorVersion = epic->MajorVersion;
+		product_info->FirmwareMinorVersion = epic->MinorVersion;
+		product_info->FirmwareBuildNumber = epic->BuildNumber;
+		product_info->iDownloadFile = epic->iDownloadFile;
+		product_info->EpicVer = epic->EpicVer;
+		product_info->Epic = epic->Supports;
+		product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
 		dump_product_info(product_info);
 
 		bits = &ep->epic_descriptor.Supports;
 		dbg("**EPIC descriptor:");
 		dbg("  VendEnableSuspend: %s", bits->VendEnableSuspend	? "TRUE": "FALSE");
-		dbg("  IOSPOpen         : %s", bits->IOSPOpen		? "TRUE": "FALSE" );
-		dbg("  IOSPClose        : %s", bits->IOSPClose		? "TRUE": "FALSE" );
-		dbg("  IOSPChase        : %s", bits->IOSPChase		? "TRUE": "FALSE" );
-		dbg("  IOSPSetRxFlow    : %s", bits->IOSPSetRxFlow	? "TRUE": "FALSE" );
-		dbg("  IOSPSetTxFlow    : %s", bits->IOSPSetTxFlow	? "TRUE": "FALSE" );
-		dbg("  IOSPSetXChar     : %s", bits->IOSPSetXChar	? "TRUE": "FALSE" );
-		dbg("  IOSPRxCheck      : %s", bits->IOSPRxCheck	? "TRUE": "FALSE" );
-		dbg("  IOSPSetClrBreak  : %s", bits->IOSPSetClrBreak	? "TRUE": "FALSE" );
-		dbg("  IOSPWriteMCR     : %s", bits->IOSPWriteMCR	? "TRUE": "FALSE" );
-		dbg("  IOSPWriteLCR     : %s", bits->IOSPWriteLCR	? "TRUE": "FALSE" );
-		dbg("  IOSPSetBaudRate  : %s", bits->IOSPSetBaudRate	? "TRUE": "FALSE" );
-		dbg("  TrueEdgeport     : %s", bits->TrueEdgeport	? "TRUE": "FALSE" );
+		dbg("  IOSPOpen         : %s", bits->IOSPOpen		? "TRUE": "FALSE");
+		dbg("  IOSPClose        : %s", bits->IOSPClose		? "TRUE": "FALSE");
+		dbg("  IOSPChase        : %s", bits->IOSPChase		? "TRUE": "FALSE");
+		dbg("  IOSPSetRxFlow    : %s", bits->IOSPSetRxFlow	? "TRUE": "FALSE");
+		dbg("  IOSPSetTxFlow    : %s", bits->IOSPSetTxFlow	? "TRUE": "FALSE");
+		dbg("  IOSPSetXChar     : %s", bits->IOSPSetXChar	? "TRUE": "FALSE");
+		dbg("  IOSPRxCheck      : %s", bits->IOSPRxCheck	? "TRUE": "FALSE");
+		dbg("  IOSPSetClrBreak  : %s", bits->IOSPSetClrBreak	? "TRUE": "FALSE");
+		dbg("  IOSPWriteMCR     : %s", bits->IOSPWriteMCR	? "TRUE": "FALSE");
+		dbg("  IOSPWriteLCR     : %s", bits->IOSPWriteLCR	? "TRUE": "FALSE");
+		dbg("  IOSPSetBaudRate  : %s", bits->IOSPSetBaudRate	? "TRUE": "FALSE");
+		dbg("  TrueEdgeport     : %s", bits->TrueEdgeport	? "TRUE": "FALSE");
 	}
 
 	return result;
@@ -562,10 +592,10 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
 
 /*****************************************************************************
  * edge_interrupt_callback
- *	this is the callback function for when we have received data on the 
+ *	this is the callback function for when we have received data on the
  *	interrupt endpoint.
  *****************************************************************************/
-static void edge_interrupt_callback (struct urb *urb)
+static void edge_interrupt_callback(struct urb *urb)
 {
 	struct edgeport_serial	*edge_serial = urb->context;
 	struct edgeport_port *edge_port;
@@ -590,17 +620,17 @@ static void edge_interrupt_callback (struct urb *urb)
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
+						__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, status);
+		dbg("%s - nonzero urb status received: %d", __func__, status);
 		goto exit;
 	}
 
-	// process this interrupt-read even if there are no ports open
+	/* process this interrupt-read even if there are no ports open */
 	if (length) {
-		usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data);
+		usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
+						__func__, length, data);
 
 		if (length > 1) {
 			bytes_avail = data[0] | (data[1] << 8);
@@ -614,7 +644,8 @@ static void edge_interrupt_callback (struct urb *urb)
 					dbg("%s - posting a read", __func__);
 					edge_serial->read_in_progress = true;
 
-					/* we have pending bytes on the bulk in pipe, send a request */
+					/* we have pending bytes on the
+					   bulk in pipe, send a request */
 					edge_serial->read_urb->dev = edge_serial->serial->dev;
 					result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 					if (result) {
@@ -628,7 +659,8 @@ static void edge_interrupt_callback (struct urb *urb)
 		/* grab the txcredits for the ports if available */
 		position = 2;
 		portNumber = 0;
-		while ((position < length) && (portNumber < edge_serial->serial->num_ports)) {
+		while ((position < length) &&
+				(portNumber < edge_serial->serial->num_ports)) {
 			txCredits = data[position] | (data[position+1] << 8);
 			if (txCredits) {
 				port = edge_serial->serial->port[portNumber];
@@ -637,14 +669,19 @@ static void edge_interrupt_callback (struct urb *urb)
 					spin_lock(&edge_port->ep_lock);
 					edge_port->txCredits += txCredits;
 					spin_unlock(&edge_port->ep_lock);
-					dbg("%s - txcredits for port%d = %d", __func__, portNumber, edge_port->txCredits);
+					dbg("%s - txcredits for port%d = %d",
+							__func__, portNumber,
+							edge_port->txCredits);
 
-					/* tell the tty driver that something has changed */
+					/* tell the tty driver that something
+					   has changed */
 					if (edge_port->port->port.tty)
 						tty_wakeup(edge_port->port->port.tty);
 
-					// Since we have more credit, check if more data can be sent
-					send_more_port_data(edge_serial, edge_port);
+					/* Since we have more credit, check
+					   if more data can be sent */
+					send_more_port_data(edge_serial,
+								edge_port);
 				}
 			}
 			position += 2;
@@ -653,19 +690,20 @@ static void edge_interrupt_callback (struct urb *urb)
 	}
 
 exit:
-	result = usb_submit_urb (urb, GFP_ATOMIC);
-	if (result) {
-		dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result);
-	}
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&urb->dev->dev,
+			"%s - Error %d submitting control urb\n",
+						__func__, result);
 }
 
 
 /*****************************************************************************
  * edge_bulk_in_callback
- *	this is the callback function for when we have received data on the 
+ *	this is the callback function for when we have received data on the
  *	bulk in endpoint.
  *****************************************************************************/
-static void edge_bulk_in_callback (struct urb *urb)
+static void edge_bulk_in_callback(struct urb *urb)
 {
 	struct edgeport_serial	*edge_serial = urb->context;
 	unsigned char		*data = urb->transfer_buffer;
@@ -690,16 +728,18 @@ static void edge_bulk_in_callback (struct urb *urb)
 
 	raw_data_length = urb->actual_length;
 
-	usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, raw_data_length, data);
+	usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
+					__func__, raw_data_length, data);
 
 	spin_lock(&edge_serial->es_lock);
 
 	/* decrement our rxBytes available by the number that we just got */
 	edge_serial->rxBytesAvail -= raw_data_length;
 
-	dbg("%s - Received = %d, rxBytesAvail %d", __func__, raw_data_length, edge_serial->rxBytesAvail);
+	dbg("%s - Received = %d, rxBytesAvail %d", __func__,
+				raw_data_length, edge_serial->rxBytesAvail);
 
-	process_rcvd_data (edge_serial, data, urb->actual_length);
+	process_rcvd_data(edge_serial, data, urb->actual_length);
 
 	/* check to see if there's any more data for us to read */
 	if (edge_serial->rxBytesAvail > 0) {
@@ -722,10 +762,10 @@ static void edge_bulk_in_callback (struct urb *urb)
 
 /*****************************************************************************
  * edge_bulk_out_data_callback
- *	this is the callback function for when we have finished sending serial data
- *	on the bulk out endpoint.
+ *	this is the callback function for when we have finished sending
+ *	serial data on the bulk out endpoint.
  *****************************************************************************/
-static void edge_bulk_out_data_callback (struct urb *urb)
+static void edge_bulk_out_data_callback(struct urb *urb)
 {
 	struct edgeport_port *edge_port = urb->context;
 	struct tty_struct *tty;
@@ -741,24 +781,26 @@ static void edge_bulk_out_data_callback (struct urb *urb)
 	tty = edge_port->port->port.tty;
 
 	if (tty && edge_port->open) {
-		/* let the tty driver wakeup if it has a special write_wakeup function */
+		/* let the tty driver wakeup if it has a special
+		   write_wakeup function */
 		tty_wakeup(tty);
 	}
 
-	// Release the Write URB
+	/* Release the Write URB */
 	edge_port->write_in_progress = false;
 
-	// Check if more data needs to be sent
-	send_more_port_data((struct edgeport_serial *)(usb_get_serial_data(edge_port->port->serial)), edge_port);
+	/* Check if more data needs to be sent */
+	send_more_port_data((struct edgeport_serial *)
+		(usb_get_serial_data(edge_port->port->serial)), edge_port);
 }
 
 
 /*****************************************************************************
  * BulkOutCmdCallback
- *	this is the callback function for when we have finished sending a command
- *	on the bulk out endpoint.
+ *	this is the callback function for when we have finished sending a
+ *	command	on the bulk out endpoint.
  *****************************************************************************/
-static void edge_bulk_out_cmd_callback (struct urb *urb)
+static void edge_bulk_out_cmd_callback(struct urb *urb)
 {
 	struct edgeport_port *edge_port = urb->context;
 	struct tty_struct *tty;
@@ -767,17 +809,19 @@ static void edge_bulk_out_cmd_callback (struct urb *urb)
 	dbg("%s", __func__);
 
 	atomic_dec(&CmdUrbs);
-	dbg("%s - FREE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs));
+	dbg("%s - FREE URB %p (outstanding %d)", __func__,
+					urb, atomic_read(&CmdUrbs));
 
 
 	/* clean up the transfer buffer */
 	kfree(urb->transfer_buffer);
 
 	/* Free the command urb */
-	usb_free_urb (urb);
+	usb_free_urb(urb);
 
 	if (status) {
-		dbg("%s - nonzero write bulk status received: %d", __func__, status);
+		dbg("%s - nonzero write bulk status received: %d",
+							__func__, status);
 		return;
 	}
 
@@ -805,7 +849,7 @@ static void edge_bulk_out_cmd_callback (struct urb *urb)
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 static int edge_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct usb_serial *serial;
@@ -820,51 +864,59 @@ static int edge_open(struct tty_struct *tty,
 	if (tty)
 		tty->low_latency = low_latency;
 
-	/* see if we've set up our endpoint info yet (can't set it up in edge_startup
-	   as the structures were not set up at that time.) */
+	/* see if we've set up our endpoint info yet (can't set it up
+	   in edge_startup as the structures were not set up at that time.) */
 	serial = port->serial;
 	edge_serial = usb_get_serial_data(serial);
 	if (edge_serial == NULL)
 		return -ENODEV;
 	if (edge_serial->interrupt_in_buffer == NULL) {
 		struct usb_serial_port *port0 = serial->port[0];
-		
+
 		/* not set up yet, so do it now */
-		edge_serial->interrupt_in_buffer = port0->interrupt_in_buffer;
-		edge_serial->interrupt_in_endpoint = port0->interrupt_in_endpointAddress;
+		edge_serial->interrupt_in_buffer =
+					port0->interrupt_in_buffer;
+		edge_serial->interrupt_in_endpoint =
+					port0->interrupt_in_endpointAddress;
 		edge_serial->interrupt_read_urb = port0->interrupt_in_urb;
 		edge_serial->bulk_in_buffer = port0->bulk_in_buffer;
-		edge_serial->bulk_in_endpoint = port0->bulk_in_endpointAddress;
+		edge_serial->bulk_in_endpoint =
+					port0->bulk_in_endpointAddress;
 		edge_serial->read_urb = port0->read_urb;
-		edge_serial->bulk_out_endpoint = port0->bulk_out_endpointAddress;
-	
+		edge_serial->bulk_out_endpoint =
+					port0->bulk_out_endpointAddress;
+
 		/* set up our interrupt urb */
 		usb_fill_int_urb(edge_serial->interrupt_read_urb,
-				 serial->dev,
-				 usb_rcvintpipe(serial->dev,
-					        port0->interrupt_in_endpointAddress),
-				 port0->interrupt_in_buffer,
-				 edge_serial->interrupt_read_urb->transfer_buffer_length,
-				 edge_interrupt_callback, edge_serial,
-				 edge_serial->interrupt_read_urb->interval);
-		
+		      serial->dev,
+		      usb_rcvintpipe(serial->dev,
+				port0->interrupt_in_endpointAddress),
+		      port0->interrupt_in_buffer,
+		      edge_serial->interrupt_read_urb->transfer_buffer_length,
+		      edge_interrupt_callback, edge_serial,
+		      edge_serial->interrupt_read_urb->interval);
+
 		/* set up our bulk in urb */
 		usb_fill_bulk_urb(edge_serial->read_urb, serial->dev,
-				  usb_rcvbulkpipe(serial->dev,
-					  	  port0->bulk_in_endpointAddress),
-				  port0->bulk_in_buffer,
-				  edge_serial->read_urb->transfer_buffer_length,
-				  edge_bulk_in_callback, edge_serial);
+			usb_rcvbulkpipe(serial->dev,
+				port0->bulk_in_endpointAddress),
+			port0->bulk_in_buffer,
+			edge_serial->read_urb->transfer_buffer_length,
+			edge_bulk_in_callback, edge_serial);
 		edge_serial->read_in_progress = false;
 
 		/* start interrupt read for this edgeport
-		 * this interrupt will continue as long as the edgeport is connected */
-		response = usb_submit_urb (edge_serial->interrupt_read_urb, GFP_KERNEL);
+		 * this interrupt will continue as long
+		 * as the edgeport is connected */
+		response = usb_submit_urb(edge_serial->interrupt_read_urb,
+								GFP_KERNEL);
 		if (response) {
-			dev_err(&port->dev, "%s - Error %d submitting control urb\n", __func__, response);
+			dev_err(&port->dev,
+				"%s - Error %d submitting control urb\n",
+							__func__, response);
 		}
 	}
-	
+
 	/* initialize our wait queues */
 	init_waitqueue_head(&edge_port->wait_open);
 	init_waitqueue_head(&edge_port->wait_chase);
@@ -872,26 +924,29 @@ static int edge_open(struct tty_struct *tty,
 	init_waitqueue_head(&edge_port->wait_command);
 
 	/* initialize our icount structure */
-	memset (&(edge_port->icount), 0x00, sizeof(edge_port->icount));
+	memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
 
 	/* initialize our port settings */
-	edge_port->txCredits            = 0;			/* Can't send any data yet */
-	edge_port->shadowMCR            = MCR_MASTER_IE;	/* Must always set this bit to enable ints! */
+	edge_port->txCredits = 0;	/* Can't send any data yet */
+	/* Must always set this bit to enable ints! */
+	edge_port->shadowMCR = MCR_MASTER_IE;
 	edge_port->chaseResponsePending = false;
 
 	/* send a open port command */
 	edge_port->openPending = true;
 	edge_port->open        = false;
-	response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0);
+	response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0);
 
 	if (response < 0) {
-		dev_err(&port->dev, "%s - error sending open port command\n", __func__);
+		dev_err(&port->dev, "%s - error sending open port command\n",
+								__func__);
 		edge_port->openPending = false;
 		return -ENODEV;
 	}
 
 	/* now wait for the port to be completely opened */
-	wait_event_timeout(edge_port->wait_open, !edge_port->openPending, OPEN_TIMEOUT);
+	wait_event_timeout(edge_port->wait_open, !edge_port->openPending,
+								OPEN_TIMEOUT);
 
 	if (!edge_port->open) {
 		/* open timed out */
@@ -905,25 +960,26 @@ static int edge_open(struct tty_struct *tty,
 	edge_port->txfifo.tail	= 0;
 	edge_port->txfifo.count	= 0;
 	edge_port->txfifo.size	= edge_port->maxTxCredits;
-	edge_port->txfifo.fifo	= kmalloc (edge_port->maxTxCredits, GFP_KERNEL);
+	edge_port->txfifo.fifo	= kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
 
 	if (!edge_port->txfifo.fifo) {
 		dbg("%s - no memory", __func__);
-		edge_close (tty, port, filp);
+		edge_close(tty, port, filp);
 		return -ENOMEM;
 	}
 
 	/* Allocate a URB for the write */
-	edge_port->write_urb = usb_alloc_urb (0, GFP_KERNEL);
+	edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 	edge_port->write_in_progress = false;
 
 	if (!edge_port->write_urb) {
 		dbg("%s - no memory", __func__);
-		edge_close (tty, port, filp);
+		edge_close(tty, port, filp);
 		return -ENOMEM;
 	}
 
-	dbg("%s(%d) - Initialize TX fifo to %d bytes", __func__, port->number, edge_port->maxTxCredits);
+	dbg("%s(%d) - Initialize TX fifo to %d bytes",
+			__func__, port->number, edge_port->maxTxCredits);
 
 	dbg("%s exited", __func__);
 
@@ -949,27 +1005,28 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
 	int loop = 10;
 
 	while (1) {
-		// Save Last credits
+		/* Save Last credits */
 		lastCredits = edge_port->txCredits;
 
-		// Did we get our Chase response
+		/* Did we get our Chase response */
 		if (!edge_port->chaseResponsePending) {
 			dbg("%s - Got Chase Response", __func__);
 
-			// did we get all of our credit back?
-			if (edge_port->txCredits == edge_port->maxTxCredits ) {
+			/* did we get all of our credit back? */
+			if (edge_port->txCredits == edge_port->maxTxCredits) {
 				dbg("%s - Got all credits", __func__);
 				return;
 			}
 		}
 
-		// Block the thread for a while
-		prepare_to_wait(&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE);
+		/* Block the thread for a while */
+		prepare_to_wait(&edge_port->wait_chase, &wait,
+						TASK_UNINTERRUPTIBLE);
 		schedule_timeout(timeout);
 		finish_wait(&edge_port->wait_chase, &wait);
 
 		if (lastCredits == edge_port->txCredits) {
-			// No activity.. count down.
+			/* No activity.. count down. */
 			loop--;
 			if (loop == 0) {
 				edge_port->chaseResponsePending = false;
@@ -977,8 +1034,9 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
 				return;
 			}
 		} else {
-			// Reset timeout value back to 10 seconds
-			dbg("%s - Last %d, Current %d", __func__, lastCredits, edge_port->txCredits);
+			/* Reset timeout value back to 10 seconds */
+			dbg("%s - Last %d, Current %d", __func__,
+					lastCredits, edge_port->txCredits);
 			loop = 10;
 		}
 	}
@@ -995,7 +1053,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
  *		3. A timeout of 3 seconds without activity has expired
  *
  ************************************************************************/
-static void block_until_tx_empty (struct edgeport_port *edge_port)
+static void block_until_tx_empty(struct edgeport_port *edge_port)
 {
 	DEFINE_WAIT(wait);
 	struct TxFifo *fifo = &edge_port->txfifo;
@@ -1004,31 +1062,32 @@ static void block_until_tx_empty (struct edgeport_port *edge_port)
 	int loop = 30;
 
 	while (1) {
-		// Save Last count
+		/* Save Last count */
 		lastCount = fifo->count;
 
-		// Is the Edgeport Buffer empty?
+		/* Is the Edgeport Buffer empty? */
 		if (lastCount == 0) {
 			dbg("%s - TX Buffer Empty", __func__);
 			return;
 		}
 
-		// Block the thread for a while
-		prepare_to_wait (&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE);
+		/* Block the thread for a while */
+		prepare_to_wait(&edge_port->wait_chase, &wait,
+						TASK_UNINTERRUPTIBLE);
 		schedule_timeout(timeout);
 		finish_wait(&edge_port->wait_chase, &wait);
 
 		dbg("%s wait", __func__);
 
 		if (lastCount == fifo->count) {
-			// No activity.. count down.
+			/* No activity.. count down. */
 			loop--;
 			if (loop == 0) {
 				dbg("%s - TIMEOUT", __func__);
 				return;
 			}
 		} else {
-			// Reset timeout value back to seconds
+			/* Reset timeout value back to seconds */
 			loop = 30;
 		}
 	}
@@ -1040,20 +1099,20 @@ static void block_until_tx_empty (struct edgeport_port *edge_port)
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
 static void edge_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
-			 
+
 	edge_serial = usb_get_serial_data(port->serial);
 	edge_port = usb_get_serial_port_data(port);
-	if ((edge_serial == NULL) || (edge_port == NULL))
+	if (edge_serial == NULL || edge_port == NULL)
 		return;
-	
-	// block until tx is empty
+
+	/* block until tx is empty */
 	block_until_tx_empty(edge_port);
 
 	edge_port->closePending = true;
@@ -1065,13 +1124,12 @@ static void edge_close(struct tty_struct *tty,
 		edge_port->chaseResponsePending = true;
 
 		dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
-		status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
-		if (status == 0) {
-			// block until chase finished
+		status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
+		if (status == 0)
+			/* block until chase finished */
 			block_until_chase_response(edge_port);
-		} else {
+		else
 			edge_port->chaseResponsePending = false;
-		}
 	}
 
 	if ((!edge_serial->is_epic) ||
@@ -1079,10 +1137,10 @@ static void edge_close(struct tty_struct *tty,
 	     (edge_serial->epic_descriptor.Supports.IOSPClose))) {
 	       /* close the port */
 		dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__);
-		send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0);
+		send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
 	}
 
-	//port->close = true;
+	/* port->close = true; */
 	edge_port->closePending = false;
 	edge_port->open = false;
 	edge_port->openPending = false;
@@ -1090,7 +1148,8 @@ static void edge_close(struct tty_struct *tty,
 	usb_kill_urb(edge_port->write_urb);
 
 	if (edge_port->write_urb) {
-		/* if this urb had a transfer buffer already (old transfer) free it */
+		/* if this urb had a transfer buffer already
+				(old transfer) free it */
 		kfree(edge_port->write_urb->transfer_buffer);
 		usb_free_urb(edge_port->write_urb);
 		edge_port->write_urb = NULL;
@@ -1099,14 +1158,14 @@ static void edge_close(struct tty_struct *tty,
 	edge_port->txfifo.fifo = NULL;
 
 	dbg("%s exited", __func__);
-}   
+}
 
 /*****************************************************************************
  * SerialWrite
- *	this function is called by the tty driver when data should be written to
- *	the port.
- *	If successful, we return the number of bytes written, otherwise we return
- *	a negative error number.
+ *	this function is called by the tty driver when data should be written
+ *	to the port.
+ *	If successful, we return the number of bytes written, otherwise we
+ *	return a negative error number.
  *****************************************************************************/
 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *data, int count)
@@ -1124,66 +1183,76 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	// get a pointer to the Tx fifo
+	/* get a pointer to the Tx fifo */
 	fifo = &edge_port->txfifo;
 
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
 
-	// calculate number of bytes to put in fifo
-	copySize = min ((unsigned int)count, (edge_port->txCredits - fifo->count));
+	/* calculate number of bytes to put in fifo */
+	copySize = min((unsigned int)count,
+				(edge_port->txCredits - fifo->count));
 
-	dbg("%s(%d) of %d byte(s) Fifo room  %d -- will copy %d bytes", __func__,
-	    port->number, count, edge_port->txCredits - fifo->count, copySize);
+	dbg("%s(%d) of %d byte(s) Fifo room  %d -- will copy %d bytes",
+			__func__, port->number, count,
+			edge_port->txCredits - fifo->count, copySize);
 
-	/* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */
+	/* catch writes of 0 bytes which the tty driver likes to give us,
+	   and when txCredits is empty */
 	if (copySize == 0) {
 		dbg("%s - copySize = Zero", __func__);
 		goto finish_write;
 	}
 
-	// queue the data	
-	// since we can never overflow the buffer we do not have to check for full condition
-
-	// the copy is done is two parts -- first fill to the end of the buffer
-	// then copy the reset from the start of the buffer 
-
+	/* queue the data
+	 * since we can never overflow the buffer we do not have to check for a
+	 * full condition
+	 *
+	 * the copy is done is two parts -- first fill to the end of the buffer
+	 * then copy the reset from the start of the buffer
+	 */
 	bytesleft = fifo->size - fifo->head;
-	firsthalf = min (bytesleft, copySize);
-	dbg("%s - copy %d bytes of %d into fifo ", __func__, firsthalf, bytesleft);
+	firsthalf = min(bytesleft, copySize);
+	dbg("%s - copy %d bytes of %d into fifo ", __func__,
+					firsthalf, bytesleft);
 
 	/* now copy our data */
 	memcpy(&fifo->fifo[fifo->head], data, firsthalf);
-	usb_serial_debug_data(debug, &port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]);
+	usb_serial_debug_data(debug, &port->dev, __func__,
+					firsthalf, &fifo->fifo[fifo->head]);
 
-	// update the index and size
+	/* update the index and size */
 	fifo->head  += firsthalf;
 	fifo->count += firsthalf;
 
-	// wrap the index
-	if (fifo->head == fifo->size) {
+	/* wrap the index */
+	if (fifo->head == fifo->size)
 		fifo->head = 0;
-	}
 
 	secondhalf = copySize-firsthalf;
 
 	if (secondhalf) {
 		dbg("%s - copy rest of data %d", __func__, secondhalf);
 		memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
-		usb_serial_debug_data(debug, &port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]);
-		// update the index and size
+		usb_serial_debug_data(debug, &port->dev, __func__,
+					secondhalf, &fifo->fifo[fifo->head]);
+		/* update the index and size */
 		fifo->count += secondhalf;
 		fifo->head  += secondhalf;
-		// No need to check for wrap since we can not get to end of fifo in this part
+		/* No need to check for wrap since we can not get to end of
+		 * the fifo in this part
+		 */
 	}
 
 finish_write:
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
-	send_more_port_data((struct edgeport_serial *)usb_get_serial_data(port->serial), edge_port);
+	send_more_port_data((struct edgeport_serial *)
+			usb_get_serial_data(port->serial), edge_port);
 
-	dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, copySize, edge_port->txCredits, fifo->count);
+	dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__,
+				copySize, edge_port->txCredits, fifo->count);
 
-	return copySize;   
+	return copySize;
 }
 
 
@@ -1200,7 +1269,8 @@ finish_write:
  *	can transmit more.
  *
  ************************************************************************/
-static void send_more_port_data(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port)
+static void send_more_port_data(struct edgeport_serial *edge_serial,
+					struct edgeport_port *edge_port)
 {
 	struct TxFifo	*fifo = &edge_port->txfifo;
 	struct urb	*urb;
@@ -1219,67 +1289,78 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge
 	if (edge_port->write_in_progress ||
 	    !edge_port->open             ||
 	    (fifo->count == 0)) {
-		dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __func__, edge_port->port->number, fifo->count, edge_port->write_in_progress);
+		dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d",
+				__func__, edge_port->port->number,
+				fifo->count, edge_port->write_in_progress);
 		goto exit_send;
 	}
 
-	// since the amount of data in the fifo will always fit into the
-	// edgeport buffer we do not need to check the write length
-
-	//	Do we have enough credits for this port to make it worthwhile
-	//	to bother queueing a write. If it's too small, say a few bytes,
-	//	it's better to wait for more credits so we can do a larger
-	//	write.
-	if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits,EDGE_FW_BULK_MAX_PACKET_SIZE)) {
-		dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __func__, edge_port->port->number, fifo->count, edge_port->txCredits );
+	/* since the amount of data in the fifo will always fit into the
+	 * edgeport buffer we do not need to check the write length
+	 *
+	 * Do we have enough credits for this port to make it worthwhile
+	 * to bother queueing a write. If it's too small, say a few bytes,
+	 * it's better to wait for more credits so we can do a larger write.
+	 */
+	if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
+		dbg("%s(%d) Not enough credit - fifo %d TxCredit %d",
+			__func__, edge_port->port->number, fifo->count,
+			edge_port->txCredits);
 		goto exit_send;
 	}
 
-	// lock this write
+	/* lock this write */
 	edge_port->write_in_progress = true;
 
-	// get a pointer to the write_urb
+	/* get a pointer to the write_urb */
 	urb = edge_port->write_urb;
 
 	/* make sure transfer buffer is freed */
 	kfree(urb->transfer_buffer);
 	urb->transfer_buffer = NULL;
 
-	/* build the data header for the buffer and port that we are about to send out */
+	/* build the data header for the buffer and port that we are about
+	   to send out */
 	count = fifo->count;
-	buffer = kmalloc (count+2, GFP_ATOMIC);
+	buffer = kmalloc(count+2, GFP_ATOMIC);
 	if (buffer == NULL) {
-		dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __func__);
+		dev_err(&edge_port->port->dev,
+				"%s - no more kernel memory...\n", __func__);
 		edge_port->write_in_progress = false;
 		goto exit_send;
 	}
-	buffer[0] = IOSP_BUILD_DATA_HDR1 (edge_port->port->number - edge_port->port->serial->minor, count);
-	buffer[1] = IOSP_BUILD_DATA_HDR2 (edge_port->port->number - edge_port->port->serial->minor, count);
+	buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number
+				- edge_port->port->serial->minor, count);
+	buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number
+				- edge_port->port->serial->minor, count);
 
 	/* now copy our data */
 	bytesleft =  fifo->size - fifo->tail;
-	firsthalf = min (bytesleft, count);
+	firsthalf = min(bytesleft, count);
 	memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf);
 	fifo->tail  += firsthalf;
 	fifo->count -= firsthalf;
-	if (fifo->tail == fifo->size) {
+	if (fifo->tail == fifo->size)
 		fifo->tail = 0;
-	}
 
 	secondhalf = count-firsthalf;
 	if (secondhalf) {
-		memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], secondhalf);
+		memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail],
+								secondhalf);
 		fifo->tail  += secondhalf;
 		fifo->count -= secondhalf;
 	}
 
 	if (count)
-		usb_serial_debug_data(debug, &edge_port->port->dev, __func__, count, &buffer[2]);
+		usb_serial_debug_data(debug, &edge_port->port->dev,
+						__func__, count, &buffer[2]);
 
 	/* fill up the urb with all of our data and submit it */
-	usb_fill_bulk_urb (urb, edge_serial->serial->dev, 
-		       usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint),
-		       buffer, count+2, edge_bulk_out_data_callback, edge_port);
+	usb_fill_bulk_urb(urb, edge_serial->serial->dev,
+			usb_sndbulkpipe(edge_serial->serial->dev,
+					edge_serial->bulk_out_endpoint),
+			buffer, count+2,
+			edge_bulk_out_data_callback, edge_port);
 
 	/* decrement the number of credits we have by the number we just sent */
 	edge_port->txCredits -= count;
@@ -1289,14 +1370,17 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		/* something went wrong */
-		dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __func__, status);
+		dev_err(&edge_port->port->dev,
+			"%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
+				__func__, status);
 		edge_port->write_in_progress = false;
 
 		/* revert the credits as something bad happened. */
 		edge_port->txCredits += count;
 		edge_port->icount.tx -= count;
 	}
-	dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __func__, count, edge_port->txCredits, fifo->count);
+	dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d",
+			__func__, count, edge_port->txCredits, fifo->count);
 
 exit_send:
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
@@ -1305,11 +1389,10 @@ exit_send:
 
 /*****************************************************************************
  * edge_write_room
- *	this function is called by the tty driver when it wants to know how many
- *	bytes of data we can accept for a specific port.
- *	If successful, we return the amount of room that we have for this port
- *	(the txCredits), 
- *	Otherwise we return a negative error number.
+ *	this function is called by the tty driver when it wants to know how
+ *	many bytes of data we can accept for a specific port. If successful,
+ *	we return the amount of room that we have for this port	(the txCredits)
+ *	otherwise we return a negative error number.
  *****************************************************************************/
 static int edge_write_room(struct tty_struct *tty)
 {
@@ -1332,7 +1415,7 @@ static int edge_write_room(struct tty_struct *tty)
 		return -EINVAL;
 	}
 
-	// total of both buffers is still txCredit
+	/* total of both buffers is still txCredit */
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
 	room = edge_port->txCredits - edge_port->txfifo.count;
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
@@ -1344,11 +1427,11 @@ static int edge_write_room(struct tty_struct *tty)
 
 /*****************************************************************************
  * edge_chars_in_buffer
- *	this function is called by the tty driver when it wants to know how many
- *	bytes of data we currently have outstanding in the port (data that has
- *	been written, but hasn't made it out the port yet)
- *	If successful, we return the number of bytes left to be written in the 
- *	system, 
+ *	this function is called by the tty driver when it wants to know how
+ *	many bytes of data we currently have outstanding in the port (data that
+ *	has been written, but hasn't made it out the port yet)
+ *	If successful, we return the number of bytes left to be written in the
+ *	system,
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 static int edge_chars_in_buffer(struct tty_struct *tty)
@@ -1371,10 +1454,12 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
 	}
 
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
-	num_chars = edge_port->maxTxCredits - edge_port->txCredits + edge_port->txfifo.count;
+	num_chars = edge_port->maxTxCredits - edge_port->txCredits +
+						edge_port->txfifo.count;
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 	if (num_chars) {
-		dbg("%s(port %d) - returns %d", __func__, port->number, num_chars);
+		dbg("%s(port %d) - returns %d", __func__,
+						port->number, num_chars);
 	}
 
 	return num_chars;
@@ -1405,19 +1490,18 @@ static void edge_throttle(struct tty_struct *tty)
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
-		status = edge_write (tty, port, &stop_char, 1);
-		if (status <= 0) {
+		status = edge_write(tty, port, &stop_char, 1);
+		if (status <= 0)
 			return;
-		}
 	}
 
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		edge_port->shadowMCR &= ~MCR_RTS;
-		status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
-		if (status != 0) {
+		status = send_cmd_write_uart_register(edge_port, MCR,
+							edge_port->shadowMCR);
+		if (status != 0)
 			return;
-		}
 	}
 
 	return;
@@ -1426,8 +1510,8 @@ static void edge_throttle(struct tty_struct *tty)
 
 /*****************************************************************************
  * edge_unthrottle
- *	this function is called by the tty driver when it wants to resume the data
- *	being read from the port (called after SerialThrottle is called)
+ *	this function is called by the tty driver when it wants to resume the
+ *	data being read from the port (called after SerialThrottle is called)
  *****************************************************************************/
 static void edge_unthrottle(struct tty_struct *tty)
 {
@@ -1455,14 +1539,16 @@ static void edge_unthrottle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		edge_port->shadowMCR |= MCR_RTS;
-		send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
+		send_cmd_write_uart_register(edge_port, MCR,
+						edge_port->shadowMCR);
 	}
 }
 
 
 /*****************************************************************************
  * SerialSetTermios
- *	this function is called by the tty driver when it wants to change the termios structure
+ *	this function is called by the tty driver when it wants to change
+ * the termios structure
  *****************************************************************************/
 static void edge_set_termios(struct tty_struct *tty,
 	struct usb_serial_port *port, struct ktermios *old_termios)
@@ -1499,9 +1585,10 @@ static void edge_set_termios(struct tty_struct *tty,
  * 	    release the bus after transmitting. This must be done when
  * 	    the transmit shift register is empty, not be done when the
  * 	    transmit holding register is empty.  This functionality
- * 	    allows an RS485 driver to be written in user space. 
+ * 	    allows an RS485 driver to be written in user space.
  *****************************************************************************/
-static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *value)
+static int get_lsr_info(struct edgeport_port *edge_port,
+						unsigned int __user *value)
 {
 	unsigned int result = 0;
 	unsigned long flags;
@@ -1519,7 +1606,8 @@ static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *va
 	return 0;
 }
 
-static int edge_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear)
+static int edge_tiocmset(struct tty_struct *tty, struct file *file,
+					unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
@@ -1574,7 +1662,8 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo)
+static int get_serial_info(struct edgeport_port *edge_port,
+				struct serial_struct __user *retinfo)
 {
 	struct serial_struct tmp;
 
@@ -1617,60 +1706,61 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
 	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
 
 	switch (cmd) {
-		case TIOCSERGETLSR:
-			dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
-			return get_lsr_info(edge_port, (unsigned int __user *) arg);
-
-		case TIOCGSERIAL:
-			dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
-			return get_serial_info(edge_port, (struct serial_struct __user *) arg);
-
-		case TIOCMIWAIT:
-			dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
-			cprev = edge_port->icount;
-			while (1) {
-				prepare_to_wait(&edge_port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE);
-				schedule();
-				finish_wait(&edge_port->delta_msr_wait, &wait);
-				/* see if a signal did it */
-				if (signal_pending(current))
-					return -ERESTARTSYS;
-				cnow = edge_port->icount;
-				if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-				    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-					return -EIO; /* no change => error */
-				if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-				    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-				    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-				    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
-					return 0;
-				}
-				cprev = cnow;
+	case TIOCSERGETLSR:
+		dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
+		return get_lsr_info(edge_port, (unsigned int __user *) arg);
+
+	case TIOCGSERIAL:
+		dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
+		return get_serial_info(edge_port, (struct serial_struct __user *) arg);
+
+	case TIOCMIWAIT:
+		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		cprev = edge_port->icount;
+		while (1) {
+			prepare_to_wait(&edge_port->delta_msr_wait,
+						&wait, TASK_INTERRUPTIBLE);
+			schedule();
+			finish_wait(&edge_port->delta_msr_wait, &wait);
+			/* see if a signal did it */
+			if (signal_pending(current))
+				return -ERESTARTSYS;
+			cnow = edge_port->icount;
+			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+				return -EIO; /* no change => error */
+			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
+			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+				return 0;
 			}
-			/* NOTREACHED */
-			break;
+			cprev = cnow;
+		}
+		/* NOTREACHED */
+		break;
 
-		case TIOCGICOUNT:
-			cnow = edge_port->icount;
-			memset(&icount, 0, sizeof(icount));
-			icount.cts = cnow.cts;
-			icount.dsr = cnow.dsr;
-			icount.rng = cnow.rng;
-			icount.dcd = cnow.dcd;
-			icount.rx = cnow.rx;
-			icount.tx = cnow.tx;
-			icount.frame = cnow.frame;
-			icount.overrun = cnow.overrun;
-			icount.parity = cnow.parity;
-			icount.brk = cnow.brk;
-			icount.buf_overrun = cnow.buf_overrun;
-
-			dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,  port->number, icount.rx, icount.tx );
-			if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
-				return -EFAULT;
-			return 0;
+	case TIOCGICOUNT:
+		cnow = edge_port->icount;
+		memset(&icount, 0, sizeof(icount));
+		icount.cts = cnow.cts;
+		icount.dsr = cnow.dsr;
+		icount.rng = cnow.rng;
+		icount.dcd = cnow.dcd;
+		icount.rx = cnow.rx;
+		icount.tx = cnow.tx;
+		icount.frame = cnow.frame;
+		icount.overrun = cnow.overrun;
+		icount.parity = cnow.parity;
+		icount.brk = cnow.brk;
+		icount.buf_overrun = cnow.buf_overrun;
+
+		dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
+				__func__,  port->number, icount.rx, icount.tx);
+		if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
+			return -EFAULT;
+		return 0;
 	}
-
 	return -ENOIOCTLCMD;
 }
 
@@ -1679,7 +1769,7 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
  * SerialBreak
  *	this function sends a break to the port
  *****************************************************************************/
-static void edge_break (struct tty_struct *tty, int break_state)
+static void edge_break(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
@@ -1693,9 +1783,9 @@ static void edge_break (struct tty_struct *tty, int break_state)
 		edge_port->chaseResponsePending = true;
 
 		dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
-		status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
+		status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
 		if (status == 0) {
-			// block until chase finished
+			/* block until chase finished */
 			block_until_chase_response(edge_port);
 		} else {
 			edge_port->chaseResponsePending = false;
@@ -1707,14 +1797,16 @@ static void edge_break (struct tty_struct *tty, int break_state)
 	     (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
 		if (break_state == -1) {
 			dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__);
-			status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0);
+			status = send_iosp_ext_cmd(edge_port,
+						IOSP_CMD_SET_BREAK, 0);
 		} else {
 			dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__);
-			status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0);
-		}
-		if (status) {
-			dbg("%s - error sending break set/clear command.", __func__);
+			status = send_iosp_ext_cmd(edge_port,
+						IOSP_CMD_CLEAR_BREAK, 0);
 		}
+		if (status)
+			dbg("%s - error sending break set/clear command.",
+				__func__);
 	}
 
 	return;
@@ -1725,7 +1817,8 @@ static void edge_break (struct tty_struct *tty, int break_state)
  * process_rcvd_data
  *	this function handles the data received on the bulk in pipe.
  *****************************************************************************/
-static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char * buffer, __u16 bufferLength)
+static void process_rcvd_data(struct edgeport_serial *edge_serial,
+				unsigned char *buffer, __u16 bufferLength)
 {
 	struct usb_serial_port *port;
 	struct edgeport_port *edge_port;
@@ -1746,105 +1839,123 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha
 		lastBufferLength = bufferLength;
 
 		switch (edge_serial->rxState) {
-			case EXPECT_HDR1:
-				edge_serial->rxHeader1 = *buffer;
-				++buffer;
-				--bufferLength;
+		case EXPECT_HDR1:
+			edge_serial->rxHeader1 = *buffer;
+			++buffer;
+			--bufferLength;
 
-				if (bufferLength == 0) {
-					edge_serial->rxState = EXPECT_HDR2;
+			if (bufferLength == 0) {
+				edge_serial->rxState = EXPECT_HDR2;
+				break;
+			}
+			/* otherwise, drop on through */
+		case EXPECT_HDR2:
+			edge_serial->rxHeader2 = *buffer;
+			++buffer;
+			--bufferLength;
+
+			dbg("%s - Hdr1=%02X Hdr2=%02X", __func__,
+			    edge_serial->rxHeader1, edge_serial->rxHeader2);
+			/* Process depending on whether this header is
+			 * data or status */
+
+			if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
+				/* Decode this status header and go to
+				 * EXPECT_HDR1 (if we can process the status
+				 * with only 2 bytes), or go to EXPECT_HDR3 to
+				 * get the third byte. */
+				edge_serial->rxPort =
+				    IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
+				edge_serial->rxStatusCode =
+				    IOSP_GET_STATUS_CODE(
+						edge_serial->rxHeader1);
+
+				if (!IOSP_STATUS_IS_2BYTE(
+						edge_serial->rxStatusCode)) {
+					/* This status needs additional bytes.
+					 * Save what we have and then wait for
+					 * more data.
+					 */
+					edge_serial->rxStatusParam
+						= edge_serial->rxHeader2;
+					edge_serial->rxState = EXPECT_HDR3;
 					break;
 				}
-				/* otherwise, drop on through */
-
-			case EXPECT_HDR2:
-				edge_serial->rxHeader2 = *buffer;
-				++buffer;
-				--bufferLength;
-
-				dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, edge_serial->rxHeader1, edge_serial->rxHeader2);
-
-				// Process depending on whether this header is
-				// data or status
-
-				if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
-					// Decode this status header and goto EXPECT_HDR1 (if we
-					// can process the status with only 2 bytes), or goto
-					// EXPECT_HDR3 to get the third byte.
-
-					edge_serial->rxPort       = IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
-					edge_serial->rxStatusCode = IOSP_GET_STATUS_CODE(edge_serial->rxHeader1);
-
-					if (!IOSP_STATUS_IS_2BYTE(edge_serial->rxStatusCode)) {
-						// This status needs additional bytes. Save what we have
-						// and then wait for more data.
-						edge_serial->rxStatusParam = edge_serial->rxHeader2;
-
-						edge_serial->rxState = EXPECT_HDR3;
-						break;
-					}
+				/* We have all the header bytes, process the
+				   status now */
+				process_rcvd_status(edge_serial,
+						edge_serial->rxHeader2, 0);
+				edge_serial->rxState = EXPECT_HDR1;
+				break;
+			} else {
+				edge_serial->rxPort =
+				    IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
+				edge_serial->rxBytesRemaining =
+				    IOSP_GET_HDR_DATA_LEN(
+						edge_serial->rxHeader1,
+						edge_serial->rxHeader2);
+				dbg("%s - Data for Port %u Len %u",
+						__func__,
+						edge_serial->rxPort,
+						edge_serial->rxBytesRemaining);
+
+				/* ASSERT(DevExt->RxPort < DevExt->NumPorts);
+				 * ASSERT(DevExt->RxBytesRemaining <
+				 *		IOSP_MAX_DATA_LENGTH);
+				 */
 
-					// We have all the header bytes, process the status now
-					process_rcvd_status (edge_serial, edge_serial->rxHeader2, 0);
-					edge_serial->rxState = EXPECT_HDR1;
+				if (bufferLength == 0) {
+					edge_serial->rxState = EXPECT_DATA;
 					break;
-				} else {
-					edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
-					edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1, edge_serial->rxHeader2);
-
-					dbg("%s - Data for Port %u Len %u", __func__, edge_serial->rxPort, edge_serial->rxBytesRemaining);
-
-					//ASSERT( DevExt->RxPort < DevExt->NumPorts );
-					//ASSERT( DevExt->RxBytesRemaining < IOSP_MAX_DATA_LENGTH );
-
-					if (bufferLength == 0 ) {
-						edge_serial->rxState = EXPECT_DATA;
-						break;
-					}
-					// Else, drop through
 				}
+				/* Else, drop through */
+			}
+		case EXPECT_DATA: /* Expect data */
+			if (bufferLength < edge_serial->rxBytesRemaining) {
+				rxLen = bufferLength;
+				/* Expect data to start next buffer */
+				edge_serial->rxState = EXPECT_DATA;
+			} else {
+				/* BufLen >= RxBytesRemaining */
+				rxLen = edge_serial->rxBytesRemaining;
+				/* Start another header next time */
+				edge_serial->rxState = EXPECT_HDR1;
+			}
 
-			case EXPECT_DATA:	// Expect data
-
-				if (bufferLength < edge_serial->rxBytesRemaining) {
-					rxLen = bufferLength;
-					edge_serial->rxState = EXPECT_DATA;	// Expect data to start next buffer
-				} else {
-					// BufLen >= RxBytesRemaining
-					rxLen = edge_serial->rxBytesRemaining;
-					edge_serial->rxState = EXPECT_HDR1;	// Start another header next time
-				}
+			bufferLength -= rxLen;
+			edge_serial->rxBytesRemaining -= rxLen;
 
-				bufferLength -= rxLen;
-				edge_serial->rxBytesRemaining -= rxLen;
-
-				/* spit this data back into the tty driver if this port is open */
-				if (rxLen) {
-					port = edge_serial->serial->port[edge_serial->rxPort];
-					edge_port = usb_get_serial_port_data(port);
-					if (edge_port->open) {
-						tty = edge_port->port->port.tty;
-						if (tty) {
-							dbg("%s - Sending %d bytes to TTY for port %d", __func__, rxLen, edge_serial->rxPort);
-							edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
-						}
-						edge_port->icount.rx += rxLen;
+			/* spit this data back into the tty driver if this
+			   port is open */
+			if (rxLen) {
+				port = edge_serial->serial->port[
+							edge_serial->rxPort];
+				edge_port = usb_get_serial_port_data(port);
+				if (edge_port->open) {
+					tty = edge_port->port->port.tty;
+					if (tty) {
+						dbg("%s - Sending %d bytes to TTY for port %d",
+							__func__, rxLen, edge_serial->rxPort);
+						edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
 					}
-					buffer += rxLen;
+					edge_port->icount.rx += rxLen;
 				}
+				buffer += rxLen;
+			}
+			break;
 
-				break;
-
-			case EXPECT_HDR3:			// Expect 3rd byte of status header
-				edge_serial->rxHeader3 = *buffer;
-				++buffer;
-				--bufferLength;
-
-				// We have all the header bytes, process the status now
-				process_rcvd_status (edge_serial, edge_serial->rxStatusParam, edge_serial->rxHeader3);
-				edge_serial->rxState = EXPECT_HDR1;
-				break;
-
+		case EXPECT_HDR3:	/* Expect 3rd byte of status header */
+			edge_serial->rxHeader3 = *buffer;
+			++buffer;
+			--bufferLength;
+
+			/* We have all the header bytes, process the
+			   status now */
+			process_rcvd_status(edge_serial,
+				edge_serial->rxStatusParam,
+				edge_serial->rxHeader3);
+			edge_serial->rxState = EXPECT_HDR1;
+			break;
 		}
 	}
 }
@@ -1852,9 +1963,11 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha
 
 /*****************************************************************************
  * process_rcvd_status
- *	this function handles the any status messages received on the bulk in pipe.
+ *	this function handles the any status messages received on the
+ *	bulk in pipe.
  *****************************************************************************/
-static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3)
+static void process_rcvd_status(struct edgeport_serial *edge_serial,
+						__u8 byte2, __u8 byte3)
 {
 	struct usb_serial_port *port;
 	struct edgeport_port *edge_port;
@@ -1864,7 +1977,9 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
 	port = edge_serial->serial->port[edge_serial->rxPort];
 	edge_port = usb_get_serial_port_data(port);
 	if (edge_port == NULL) {
-		dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __func__, edge_serial->rxPort);
+		dev_err(&edge_serial->serial->dev->dev,
+			"%s - edge_port == NULL for port %d\n",
+					__func__, edge_serial->rxPort);
 		return;
 	}
 
@@ -1872,22 +1987,28 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
 
 	if (code == IOSP_EXT_STATUS) {
 		switch (byte2) {
-			case IOSP_EXT_STATUS_CHASE_RSP:
-				// we want to do EXT status regardless of port open/closed 
-				dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __func__, edge_serial->rxPort, byte3 );
-				// Currently, the only EXT_STATUS is Chase, so process here instead of one more call
-				// to one more subroutine. If/when more EXT_STATUS, there'll be more work to do.
-				// Also, we currently clear flag and close the port regardless of content of above's Byte3.
-				// We could choose to do something else when Byte3 says Timeout on Chase from Edgeport,
-				// like wait longer in block_until_chase_response, but for now we don't. 
-				edge_port->chaseResponsePending = false;
-				wake_up (&edge_port->wait_chase);
-				return;
+		case IOSP_EXT_STATUS_CHASE_RSP:
+			/* we want to do EXT status regardless of port
+			 * open/closed */
+			dbg("%s - Port %u EXT CHASE_RSP Data = %02x",
+					__func__, edge_serial->rxPort, byte3);
+			/* Currently, the only EXT_STATUS is Chase, so process
+			 * here instead of one more call to one more subroutine
+			 * If/when more EXT_STATUS, there'll be more work to do
+			 * Also, we currently clear flag and close the port
+			 * regardless of content of above's Byte3.
+			 * We could choose to do something else when Byte3 says
+			 * Timeout on Chase from Edgeport, like wait longer in
+			 * block_until_chase_response, but for now we don't.
+			 */
+			edge_port->chaseResponsePending = false;
+			wake_up(&edge_port->wait_chase);
+			return;
 
-			case IOSP_EXT_STATUS_RX_CHECK_RSP:
-				dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3 );
-				//Port->RxCheckRsp = true;
-				return;
+		case IOSP_EXT_STATUS_RX_CHECK_RSP:
+			dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3);
+			/* Port->RxCheckRsp = true; */
+			return;
 		}
 	}
 
@@ -1895,12 +2016,14 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
 		edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
 		edge_port->maxTxCredits = edge_port->txCredits;
 		dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
-		handle_new_msr (edge_port, byte2);
+		handle_new_msr(edge_port, byte2);
 
-		/* send the current line settings to the port so we are in sync with any further termios calls */
+		/* send the current line settings to the port so we are
+		   in sync with any further termios calls */
 		/* FIXME: locking on tty */
 		if (edge_port->port->port.tty)
-			change_port_settings(edge_port->port->port.tty, edge_port, edge_port->port->port.tty->termios);
+			change_port_settings(edge_port->port->port.tty,
+				edge_port, edge_port->port->port.tty->termios);
 
 		/* we have completed the open */
 		edge_port->openPending = false;
@@ -1909,45 +2032,49 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
 		return;
 	}
 
-	// If port is closed, silently discard all rcvd status. We can
-	// have cases where buffered status is received AFTER the close
-	// port command is sent to the Edgeport.
-	if (!edge_port->open || edge_port->closePending) {
+	/* If port is closed, silently discard all rcvd status. We can
+	 * have cases where buffered status is received AFTER the close
+	 * port command is sent to the Edgeport.
+	 */
+	if (!edge_port->open || edge_port->closePending)
 		return;
-	}
 
 	switch (code) {
-		// Not currently sent by Edgeport
-		case IOSP_STATUS_LSR:
-			dbg("%s - Port %u LSR Status = %02x", __func__, edge_serial->rxPort, byte2);
-			handle_new_lsr(edge_port, false, byte2, 0);
-			break;
+	/* Not currently sent by Edgeport */
+	case IOSP_STATUS_LSR:
+		dbg("%s - Port %u LSR Status = %02x",
+					__func__, edge_serial->rxPort, byte2);
+		handle_new_lsr(edge_port, false, byte2, 0);
+		break;
 
-		case IOSP_STATUS_LSR_DATA:
-			dbg("%s - Port %u LSR Status = %02x, Data = %02x", __func__, edge_serial->rxPort, byte2, byte3);
-			// byte2 is LSR Register
-			// byte3 is broken data byte
-			handle_new_lsr(edge_port, true, byte2, byte3);
-			break;
-			//
-			//	case IOSP_EXT_4_STATUS:
-			//		dbg("%s - Port %u LSR Status = %02x Data = %02x", __func__, edge_serial->rxPort, byte2, byte3);
-			//		break;
-			//
-		case IOSP_STATUS_MSR:
-			dbg("%s - Port %u MSR Status = %02x", __func__, edge_serial->rxPort, byte2);
-
-			// Process this new modem status and generate appropriate
-			// events, etc, based on the new status. This routine
-			// also saves the MSR in Port->ShadowMsr.
-			handle_new_msr(edge_port, byte2);
-			break;
+	case IOSP_STATUS_LSR_DATA:
+		dbg("%s - Port %u LSR Status = %02x, Data = %02x",
+				__func__, edge_serial->rxPort, byte2, byte3);
+		/* byte2 is LSR Register */
+		/* byte3 is broken data byte */
+		handle_new_lsr(edge_port, true, byte2, byte3);
+		break;
+	/*
+	 *	case IOSP_EXT_4_STATUS:
+	 *		dbg("%s - Port %u LSR Status = %02x Data = %02x",
+	 *			__func__, edge_serial->rxPort, byte2, byte3);
+	 *		break;
+	 */
+	case IOSP_STATUS_MSR:
+		dbg("%s - Port %u MSR Status = %02x",
+					__func__, edge_serial->rxPort, byte2);
+		/*
+		 * Process this new modem status and generate appropriate
+		 * events, etc, based on the new status. This routine
+		 * also saves the MSR in Port->ShadowMsr.
+		 */
+		handle_new_msr(edge_port, byte2);
+		break;
 
-		default:
-			dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
-			break;
+	default:
+		dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
+		break;
 	}
-
 	return;
 }
 
@@ -1956,7 +2083,8 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
  * edge_tty_recv
  *	this function passes data on to the tty flip buffer
  *****************************************************************************/
-static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length)
+static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
+					unsigned char *data, int length)
 {
 	int cnt;
 
@@ -1965,7 +2093,7 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned c
 		if (cnt < length) {
 			dev_err(dev, "%s - dropping data, %d bytes lost\n",
 					__func__, length - cnt);
-			if(cnt == 0)
+			if (cnt == 0)
 				break;
 		}
 		tty_insert_flip_string(tty, data, cnt);
@@ -1987,22 +2115,19 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
 
 	dbg("%s %02x", __func__, newMsr);
 
-	if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
+	if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
+			EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
 		icount = &edge_port->icount;
 
 		/* update input line counters */
-		if (newMsr & EDGEPORT_MSR_DELTA_CTS) {
+		if (newMsr & EDGEPORT_MSR_DELTA_CTS)
 			icount->cts++;
-		}
-		if (newMsr & EDGEPORT_MSR_DELTA_DSR) {
+		if (newMsr & EDGEPORT_MSR_DELTA_DSR)
 			icount->dsr++;
-		}
-		if (newMsr & EDGEPORT_MSR_DELTA_CD) {
+		if (newMsr & EDGEPORT_MSR_DELTA_CD)
 			icount->dcd++;
-		}
-		if (newMsr & EDGEPORT_MSR_DELTA_RI) {
+		if (newMsr & EDGEPORT_MSR_DELTA_RI)
 			icount->rng++;
-		}
 		wake_up_interruptible(&edge_port->delta_msr_wait);
 	}
 
@@ -2017,42 +2142,41 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
  * handle_new_lsr
  *	this function handles any change to the lsr register for a port.
  *****************************************************************************/
-static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data)
+static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
+							__u8 lsr, __u8 data)
 {
-	__u8    newLsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
-	struct  async_icount *icount;
+	__u8 newLsr = (__u8) (lsr & (__u8)
+		(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
+	struct async_icount *icount;
 
 	dbg("%s - %02x", __func__, newLsr);
 
 	edge_port->shadowLSR = lsr;
 
 	if (newLsr & LSR_BREAK) {
-		//
-		// Parity and Framing errors only count if they
-		// occur exclusive of a break being
-		// received.
-		//
+		/*
+		 * Parity and Framing errors only count if they
+		 * occur exclusive of a break being
+		 * received.
+		 */
 		newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
 	}
 
 	/* Place LSR data byte into Rx buffer */
 	if (lsrData && edge_port->port->port.tty)
-		edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
+		edge_tty_recv(&edge_port->port->dev,
+					edge_port->port->port.tty, &data, 1);
 
 	/* update input line counters */
 	icount = &edge_port->icount;
-	if (newLsr & LSR_BREAK) {
+	if (newLsr & LSR_BREAK)
 		icount->brk++;
-	}
-	if (newLsr & LSR_OVER_ERR) {
+	if (newLsr & LSR_OVER_ERR)
 		icount->overrun++;
-	}
-	if (newLsr & LSR_PAR_ERR) {
+	if (newLsr & LSR_PAR_ERR)
 		icount->parity++;
-	}
-	if (newLsr & LSR_FRM_ERR) {
+	if (newLsr & LSR_FRM_ERR)
 		icount->frame++;
-	}
 
 	return;
 }
@@ -2060,12 +2184,13 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 l
 
 /****************************************************************************
  * sram_write
- *	writes a number of bytes to the Edgeport device's sram starting at the 
+ *	writes a number of bytes to the Edgeport device's sram starting at the
  *	given address.
  *	If successful returns the number of bytes written, otherwise it returns
  *	a negative error number of the problem.
  ****************************************************************************/
-static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data)
+static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+					__u16 length, const __u8 *data)
 {
 	int result;
 	__u16 current_length;
@@ -2073,32 +2198,37 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u1
 
 	dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
 
-	transfer_buffer =  kmalloc (64, GFP_KERNEL);
+	transfer_buffer =  kmalloc(64, GFP_KERNEL);
 	if (!transfer_buffer) {
-		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64);
+		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
+							__func__, 64);
 		return -ENOMEM;
 	}
 
 	/* need to split these writes up into 64 byte chunks */
 	result = 0;
 	while (length > 0) {
-		if (length > 64) {
+		if (length > 64)
 			current_length = 64;
-		} else {
+		else
 			current_length = length;
-		}
-//		dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length);
-		memcpy (transfer_buffer, data, current_length);
-		result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_RAM, 
-					  0x40, addr, extAddr, transfer_buffer, current_length, 300);
+
+/*		dbg("%s - writing %x, %x, %d", __func__,
+					extAddr, addr, current_length); */
+		memcpy(transfer_buffer, data, current_length);
+		result = usb_control_msg(serial->dev,
+					usb_sndctrlpipe(serial->dev, 0),
+					USB_REQUEST_ION_WRITE_RAM,
+					0x40, addr, extAddr, transfer_buffer,
+					current_length, 300);
 		if (result < 0)
 			break;
 		length -= current_length;
 		addr += current_length;
 		data += current_length;
-	}       
+	}
 
-	kfree (transfer_buffer);
+	kfree(transfer_buffer);
 	return result;
 }
 
@@ -2110,40 +2240,45 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u1
  *	If successful returns the number of bytes written, otherwise it returns
  *	a negative error number of the problem.
  ****************************************************************************/
-static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data)
+static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+					__u16 length, const __u8 *data)
 {
 	int result;
 	__u16 current_length;
 	unsigned char *transfer_buffer;
 
-//	dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
+/*	dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */
 
-	transfer_buffer =  kmalloc (64, GFP_KERNEL);
+	transfer_buffer =  kmalloc(64, GFP_KERNEL);
 	if (!transfer_buffer) {
-		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64);
+		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
+								__func__, 64);
 		return -ENOMEM;
 	}
 
 	/* need to split these writes up into 64 byte chunks */
 	result = 0;
 	while (length > 0) {
-		if (length > 64) {
+		if (length > 64)
 			current_length = 64;
-		} else {
+		else
 			current_length = length;
-		}
-//		dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length);
-		memcpy (transfer_buffer, data, current_length);
-		result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_ROM, 
-					  0x40, addr, extAddr, transfer_buffer, current_length, 300);
+/*		dbg("%s - writing %x, %x, %d", __func__,
+					extAddr, addr, current_length); */
+		memcpy(transfer_buffer, data, current_length);
+		result = usb_control_msg(serial->dev,
+					usb_sndctrlpipe(serial->dev, 0),
+					USB_REQUEST_ION_WRITE_ROM, 0x40,
+					addr, extAddr,
+					transfer_buffer, current_length, 300);
 		if (result < 0)
 			break;
 		length -= current_length;
 		addr += current_length;
 		data += current_length;
-	}       
+	}
 
-	kfree (transfer_buffer);
+	kfree(transfer_buffer);
 	return result;
 }
 
@@ -2155,7 +2290,8 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16
  *	If successful returns the number of bytes read, otherwise it returns
  *	a negative error number of the problem.
  ****************************************************************************/
-static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data)
+static int rom_read(struct usb_serial *serial, __u16 extAddr,
+					__u16 addr, __u16 length, __u8 *data)
 {
 	int result;
 	__u16 current_length;
@@ -2163,32 +2299,36 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16
 
 	dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
 
-	transfer_buffer =  kmalloc (64, GFP_KERNEL);
+	transfer_buffer =  kmalloc(64, GFP_KERNEL);
 	if (!transfer_buffer) {
-		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64);
+		dev_err(&serial->dev->dev,
+			"%s - kmalloc(%d) failed.\n", __func__, 64);
 		return -ENOMEM;
 	}
 
 	/* need to split these reads up into 64 byte chunks */
 	result = 0;
 	while (length > 0) {
-		if (length > 64) {
+		if (length > 64)
 			current_length = 64;
-		} else {
+		else
 			current_length = length;
-		}
-//		dbg("%s - %x, %x, %d", __func__, extAddr, addr, current_length);
-		result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM, 
-					  0xC0, addr, extAddr, transfer_buffer, current_length, 300);
+/*		dbg("%s - %x, %x, %d", __func__,
+				extAddr, addr, current_length); */
+		result = usb_control_msg(serial->dev,
+					usb_rcvctrlpipe(serial->dev, 0),
+					USB_REQUEST_ION_READ_ROM,
+					0xC0, addr, extAddr, transfer_buffer,
+					current_length, 300);
 		if (result < 0)
 			break;
-		memcpy (data, transfer_buffer, current_length);
+		memcpy(data, transfer_buffer, current_length);
 		length -= current_length;
 		addr += current_length;
 		data += current_length;
-	}       
+	}
 
-	kfree (transfer_buffer);
+	kfree(transfer_buffer);
 	return result;
 }
 
@@ -2197,7 +2337,8 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16
  * send_iosp_ext_cmd
  *	Is used to send a IOSP message to the Edgeport device
  ****************************************************************************/
-static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param)
+static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
+						__u8 command, __u8 param)
 {
 	unsigned char   *buffer;
 	unsigned char   *currentCommand;
@@ -2206,19 +2347,20 @@ static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u
 
 	dbg("%s - %d, %d", __func__, command, param);
 
-	buffer =  kmalloc (10, GFP_ATOMIC);
+	buffer = kmalloc(10, GFP_ATOMIC);
 	if (!buffer) {
-		dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 10);
+		dev_err(&edge_port->port->dev,
+				"%s - kmalloc(%d) failed.\n", __func__, 10);
 		return -ENOMEM;
 	}
 
 	currentCommand = buffer;
 
-	MAKE_CMD_EXT_CMD (&currentCommand, &length,
-			  edge_port->port->number - edge_port->port->serial->minor,
-			  command, param);
+	MAKE_CMD_EXT_CMD(&currentCommand, &length,
+		edge_port->port->number - edge_port->port->serial->minor,
+		command, param);
 
-	status = write_cmd_usb (edge_port, buffer, length);
+	status = write_cmd_usb(edge_port, buffer, length);
 	if (status) {
 		/* something bad happened, let's free up the memory */
 		kfree(buffer);
@@ -2232,43 +2374,50 @@ static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u
  * write_cmd_usb
  *	this function writes the given buffer out to the bulk write endpoint.
  *****************************************************************************/
-static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int length)
+static int write_cmd_usb(struct edgeport_port *edge_port,
+					unsigned char *buffer, int length)
 {
-	struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
+	struct edgeport_serial *edge_serial =
+				usb_get_serial_data(edge_port->port->serial);
 	int status = 0;
 	struct urb *urb;
 	int timeout;
 
-	usb_serial_debug_data(debug, &edge_port->port->dev, __func__, length, buffer);
+	usb_serial_debug_data(debug, &edge_port->port->dev,
+						__func__, length, buffer);
 
 	/* Allocate our next urb */
-	urb = usb_alloc_urb (0, GFP_ATOMIC);
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb)
 		return -ENOMEM;
 
 	atomic_inc(&CmdUrbs);
-	dbg("%s - ALLOCATE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs));
+	dbg("%s - ALLOCATE URB %p (outstanding %d)",
+				__func__, urb, atomic_read(&CmdUrbs));
 
-	usb_fill_bulk_urb (urb, edge_serial->serial->dev, 
-		       usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint),
-		       buffer, length, edge_bulk_out_cmd_callback, edge_port);
+	usb_fill_bulk_urb(urb, edge_serial->serial->dev,
+			usb_sndbulkpipe(edge_serial->serial->dev,
+					edge_serial->bulk_out_endpoint),
+			buffer, length, edge_bulk_out_cmd_callback, edge_port);
 
 	edge_port->commandPending = true;
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 
 	if (status) {
 		/* something went wrong */
-		dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __func__, status);
+		dev_err(&edge_port->port->dev,
+		    "%s - usb_submit_urb(write command) failed, status = %d\n",
+							__func__, status);
 		usb_kill_urb(urb);
 		usb_free_urb(urb);
 		atomic_dec(&CmdUrbs);
 		return status;
 	}
 
-	// wait for command to finish
+	/* wait for command to finish */
 	timeout = COMMAND_TIMEOUT;
 #if 0
-	wait_event (&edge_port->wait_command, !edge_port->commandPending);
+	wait_event(&edge_port->wait_command, !edge_port->commandPending);
 
 	if (edge_port->commandPending) {
 		/* command timed out */
@@ -2285,15 +2434,18 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer
  *	this function sends the proper command to change the baud rate of the
  *	specified port.
  *****************************************************************************/
-static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate)
+static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
+								int baudRate)
 {
-	struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
+	struct edgeport_serial *edge_serial =
+				usb_get_serial_data(edge_port->port->serial);
 	unsigned char *cmdBuffer;
 	unsigned char *currCmd;
 	int cmdLen = 0;
 	int divisor;
 	int status;
-	unsigned char number = edge_port->port->number - edge_port->port->serial->minor;
+	unsigned char number =
+		edge_port->port->number - edge_port->port->serial->minor;
 
 	if (edge_serial->is_epic &&
 	    !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
@@ -2302,36 +2454,40 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa
 		return 0;
 	}
 
-	dbg("%s - port = %d, baud = %d", __func__, edge_port->port->number, baudRate);
+	dbg("%s - port = %d, baud = %d", __func__,
+					edge_port->port->number, baudRate);
 
-	status = calc_baud_rate_divisor (baudRate, &divisor);
+	status = calc_baud_rate_divisor(baudRate, &divisor);
 	if (status) {
-		dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __func__);
+		dev_err(&edge_port->port->dev, "%s - bad baud rate\n",
+								__func__);
 		return status;
 	}
 
-	// Alloc memory for the string of commands.
-	cmdBuffer =  kmalloc (0x100, GFP_ATOMIC);
+	/* Alloc memory for the string of commands. */
+	cmdBuffer =  kmalloc(0x100, GFP_ATOMIC);
 	if (!cmdBuffer) {
-		dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100);
+		dev_err(&edge_port->port->dev,
+			"%s - kmalloc(%d) failed.\n", __func__, 0x100);
 		return -ENOMEM;
 	}
 	currCmd = cmdBuffer;
 
-	// Enable access to divisor latch
-	MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE );
+	/* Enable access to divisor latch */
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE);
 
-	// Write the divisor itself
-	MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLL, LOW8 (divisor) );
-	MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLM, HIGH8(divisor) );
+	/* Write the divisor itself */
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor));
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor));
 
-	// Restore original value to disable access to divisor latch
-	MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, edge_port->shadowLCR);
+	/* Restore original value to disable access to divisor latch */
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR,
+						edge_port->shadowLCR);
 
-	status = write_cmd_usb(edge_port, cmdBuffer, cmdLen );
+	status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
 	if (status) {
 		/* something bad happened, let's free up the memory */
-		kfree (cmdBuffer);
+		kfree(cmdBuffer);
 	}
 
 	return status;
@@ -2343,7 +2499,7 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa
  *	this function calculates the proper baud rate divisor for the specified
  *	baud rate.
  *****************************************************************************/
-static int calc_baud_rate_divisor (int baudrate, int *divisor)
+static int calc_baud_rate_divisor(int baudrate, int *divisor)
 {
 	int i;
 	__u16 custom;
@@ -2352,17 +2508,17 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor)
 	dbg("%s - %d", __func__, baudrate);
 
 	for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
-		if ( divisor_table[i].BaudRate == baudrate ) {
+		if (divisor_table[i].BaudRate == baudrate) {
 			*divisor = divisor_table[i].Divisor;
 			return 0;
 		}
 	}
 
-	// We have tried all of the standard baud rates
-	// lets try to calculate the divisor for this baud rate
-	// Make sure the baud rate is reasonable
+	/* We have tried all of the standard baud rates
+	 * lets try to calculate the divisor for this baud rate
+	 * Make sure the baud rate is reasonable */
 	if (baudrate > 50 && baudrate < 230400) {
-		// get divisor
+		/* get divisor */
 		custom = (__u16)((230400L + baudrate/2) / baudrate);
 
 		*divisor = custom;
@@ -2377,17 +2533,20 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor)
 
 /*****************************************************************************
  * send_cmd_write_uart_register
- *	this function builds up a uart register message and sends to to the device.
+ *  this function builds up a uart register message and sends to to the device.
  *****************************************************************************/
-static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue)
+static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
+						__u8 regNum, __u8 regValue)
 {
-	struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
+	struct edgeport_serial *edge_serial =
+				usb_get_serial_data(edge_port->port->serial);
 	unsigned char *cmdBuffer;
 	unsigned char *currCmd;
 	unsigned long cmdLen = 0;
 	int status;
 
-	dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
+	dbg("%s - write to %s register 0x%02x",
+			(regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
 
 	if (edge_serial->is_epic &&
 	    !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
@@ -2399,27 +2558,26 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
 	if (edge_serial->is_epic &&
 	    !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
 	    regNum == LCR) {
-		dbg ("SendCmdWriteUartReg - Not writing to LCR Register");
+		dbg("SendCmdWriteUartReg - Not writing to LCR Register");
 		return 0;
 	}
 
-	// Alloc memory for the string of commands.
-	cmdBuffer = kmalloc (0x10, GFP_ATOMIC);
-	if (cmdBuffer == NULL ) {
+	/* Alloc memory for the string of commands. */
+	cmdBuffer = kmalloc(0x10, GFP_ATOMIC);
+	if (cmdBuffer == NULL)
 		return -ENOMEM;
-	}
 
 	currCmd = cmdBuffer;
 
-	// Build a cmd in the buffer to write the given register
-	MAKE_CMD_WRITE_REG (&currCmd, &cmdLen,
-			    edge_port->port->number - edge_port->port->serial->minor,
-			    regNum, regValue);
+	/* Build a cmd in the buffer to write the given register */
+	MAKE_CMD_WRITE_REG(&currCmd, &cmdLen,
+		edge_port->port->number - edge_port->port->serial->minor,
+		regNum, regValue);
 
 	status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
 	if (status) {
 		/* something bad happened, let's free up the memory */
-		kfree (cmdBuffer);
+		kfree(cmdBuffer);
 	}
 
 	return status;
@@ -2428,14 +2586,15 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
 
 /*****************************************************************************
  * change_port_settings
- *	This routine is called to set the UART on the device to match the specified
- *	new settings.
+ *	This routine is called to set the UART on the device to match the
+ *	specified new settings.
  *****************************************************************************/
 
 static void change_port_settings(struct tty_struct *tty,
 	struct edgeport_port *edge_port, struct ktermios *old_termios)
 {
-	struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
+	struct edgeport_serial *edge_serial =
+			usb_get_serial_data(edge_port->port->serial);
 	int baud;
 	unsigned cflag;
 	__u8 mask = 0xff;
@@ -2457,11 +2616,23 @@ static void change_port_settings(struct tty_struct *tty,
 	cflag = tty->termios->c_cflag;
 
 	switch (cflag & CSIZE) {
-		case CS5:   lData = LCR_BITS_5; mask = 0x1f;    dbg("%s - data bits = 5", __func__);   break;
-		case CS6:   lData = LCR_BITS_6; mask = 0x3f;    dbg("%s - data bits = 6", __func__);   break;
-		case CS7:   lData = LCR_BITS_7; mask = 0x7f;    dbg("%s - data bits = 7", __func__);   break;
-		default:
-		case CS8:   lData = LCR_BITS_8;                 dbg("%s - data bits = 8", __func__);   break;
+	case CS5:
+		lData = LCR_BITS_5; mask = 0x1f;
+		dbg("%s - data bits = 5", __func__);
+		break;
+	case CS6:
+		lData = LCR_BITS_6; mask = 0x3f;
+		dbg("%s - data bits = 6", __func__);
+		break;
+	case CS7:
+		lData = LCR_BITS_7; mask = 0x7f;
+		dbg("%s - data bits = 7", __func__);
+		break;
+	default:
+	case CS8:
+		lData = LCR_BITS_8;
+		dbg("%s - data bits = 8", __func__);
+		break;
 	}
 
 	lParity = LCR_PAR_NONE;
@@ -2503,7 +2674,8 @@ static void change_port_settings(struct tty_struct *tty,
 		dbg("%s - RTS/CTS is disabled", __func__);
 	}
 
-	/* if we are implementing XON/XOFF, set the start and stop character in the device */
+	/* if we are implementing XON/XOFF, set the start and stop character
+	   in the device */
 	if (I_IXOFF(tty) || I_IXON(tty)) {
 		unsigned char stop_char  = STOP_CHAR(tty);
 		unsigned char start_char = START_CHAR(tty);
@@ -2511,14 +2683,17 @@ static void change_port_settings(struct tty_struct *tty,
 		if ((!edge_serial->is_epic) ||
 		    ((edge_serial->is_epic) &&
 		     (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
-			send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XON_CHAR, start_char);
-			send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XOFF_CHAR, stop_char);
+			send_iosp_ext_cmd(edge_port,
+					IOSP_CMD_SET_XON_CHAR, start_char);
+			send_iosp_ext_cmd(edge_port,
+					IOSP_CMD_SET_XOFF_CHAR, stop_char);
 		}
 
 		/* if we are implementing INBOUND XON/XOFF */
 		if (I_IXOFF(tty)) {
 			rxFlow |= IOSP_RX_FLOW_XON_XOFF;
-			dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char);
+			dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
+					__func__, start_char, stop_char);
 		} else {
 			dbg("%s - INBOUND XON/XOFF is disabled", __func__);
 		}
@@ -2526,7 +2701,8 @@ static void change_port_settings(struct tty_struct *tty,
 		/* if we are implementing OUTBOUND XON/XOFF */
 		if (I_IXON(tty)) {
 			txFlow |= IOSP_TX_FLOW_XON_XOFF;
-			dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char);
+			dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
+					__func__, start_char, stop_char);
 		} else {
 			dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
 		}
@@ -2549,20 +2725,20 @@ static void change_port_settings(struct tty_struct *tty,
 	edge_port->validDataMask = mask;
 
 	/* Send the updated LCR value to the EdgePort */
-	status = send_cmd_write_uart_register(edge_port, LCR, edge_port->shadowLCR);
-	if (status != 0) {
+	status = send_cmd_write_uart_register(edge_port, LCR,
+							edge_port->shadowLCR);
+	if (status != 0)
 		return;
-	}
 
 	/* set up the MCR register and send it to the EdgePort */
 	edge_port->shadowMCR = MCR_MASTER_IE;
-	if (cflag & CBAUD) {
+	if (cflag & CBAUD)
 		edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
-	}
-	status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
-	if (status != 0) {
+
+	status = send_cmd_write_uart_register(edge_port, MCR,
+						edge_port->shadowMCR);
+	if (status != 0)
 		return;
-	}
 
 	/* Determine divisor based on baud rate */
 	baud = tty_get_baud_rate(tty);
@@ -2572,7 +2748,7 @@ static void change_port_settings(struct tty_struct *tty,
 	}
 
 	dbg("%s - baud rate = %d", __func__, baud);
-	status = send_cmd_write_baud_rate (edge_port, baud);
+	status = send_cmd_write_baud_rate(edge_port, baud);
 	if (status == -1) {
 		/* Speed change was not possible - put back the old speed */
 		baud = tty_termios_baud_rate(old_termios);
@@ -2589,7 +2765,8 @@ static void change_port_settings(struct tty_struct *tty,
  *	ASCII range, but it's only for debugging...
  *	NOTE: expects the unicode in LE format
  ****************************************************************************/
-static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size)
+static void unicode_to_ascii(char *string, int buflen,
+					__le16 *unicode, int unicode_size)
 {
 	int i;
 
@@ -2608,75 +2785,99 @@ static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unic
 
 /****************************************************************************
  * get_manufacturing_desc
- *	reads in the manufacturing descriptor and stores it into the serial 
+ *	reads in the manufacturing descriptor and stores it into the serial
  *	structure.
  ****************************************************************************/
-static void get_manufacturing_desc (struct edgeport_serial *edge_serial)
+static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
 {
 	int response;
 
 	dbg("getting manufacturer descriptor");
 
-	response = rom_read (edge_serial->serial, (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, 
-			    (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), EDGE_MANUF_DESC_LEN,
-			    (__u8 *)(&edge_serial->manuf_descriptor));
+	response = rom_read(edge_serial->serial,
+				(EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
+				(__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff),
+				EDGE_MANUF_DESC_LEN,
+				(__u8 *)(&edge_serial->manuf_descriptor));
 
-	if (response < 1) {
-		dev_err(&edge_serial->serial->dev->dev, "error in getting manufacturer descriptor\n");
-	} else {
+	if (response < 1)
+		dev_err(&edge_serial->serial->dev->dev,
+			"error in getting manufacturer descriptor\n");
+	else {
 		char string[30];
 		dbg("**Manufacturer Descriptor");
-		dbg("  RomSize:        %dK", edge_serial->manuf_descriptor.RomSize);
-		dbg("  RamSize:        %dK", edge_serial->manuf_descriptor.RamSize);
-		dbg("  CpuRev:         %d", edge_serial->manuf_descriptor.CpuRev);
-		dbg("  BoardRev:       %d", edge_serial->manuf_descriptor.BoardRev);
-		dbg("  NumPorts:       %d", edge_serial->manuf_descriptor.NumPorts);
-		dbg("  DescDate:       %d/%d/%d", edge_serial->manuf_descriptor.DescDate[0], edge_serial->manuf_descriptor.DescDate[1], edge_serial->manuf_descriptor.DescDate[2]+1900);
+		dbg("  RomSize:        %dK",
+			edge_serial->manuf_descriptor.RomSize);
+		dbg("  RamSize:        %dK",
+			edge_serial->manuf_descriptor.RamSize);
+		dbg("  CpuRev:         %d",
+			edge_serial->manuf_descriptor.CpuRev);
+		dbg("  BoardRev:       %d",
+			edge_serial->manuf_descriptor.BoardRev);
+		dbg("  NumPorts:       %d",
+			edge_serial->manuf_descriptor.NumPorts);
+		dbg("  DescDate:       %d/%d/%d",
+			edge_serial->manuf_descriptor.DescDate[0],
+			edge_serial->manuf_descriptor.DescDate[1],
+			edge_serial->manuf_descriptor.DescDate[2]+1900);
 		unicode_to_ascii(string, sizeof(string),
-		    edge_serial->manuf_descriptor.SerialNumber,
-		    edge_serial->manuf_descriptor.SerNumLength/2);
+			edge_serial->manuf_descriptor.SerialNumber,
+			edge_serial->manuf_descriptor.SerNumLength/2);
 		dbg("  SerialNumber: %s", string);
 		unicode_to_ascii(string, sizeof(string),
-		    edge_serial->manuf_descriptor.AssemblyNumber,
-		    edge_serial->manuf_descriptor.AssemblyNumLength/2);
+			edge_serial->manuf_descriptor.AssemblyNumber,
+			edge_serial->manuf_descriptor.AssemblyNumLength/2);
 		dbg("  AssemblyNumber: %s", string);
 		unicode_to_ascii(string, sizeof(string),
 		    edge_serial->manuf_descriptor.OemAssyNumber,
 		    edge_serial->manuf_descriptor.OemAssyNumLength/2);
 		dbg("  OemAssyNumber:  %s", string);
-		dbg("  UartType:       %d", edge_serial->manuf_descriptor.UartType);
-		dbg("  IonPid:         %d", edge_serial->manuf_descriptor.IonPid);
-		dbg("  IonConfig:      %d", edge_serial->manuf_descriptor.IonConfig);
+		dbg("  UartType:       %d",
+			edge_serial->manuf_descriptor.UartType);
+		dbg("  IonPid:         %d",
+			edge_serial->manuf_descriptor.IonPid);
+		dbg("  IonConfig:      %d",
+			edge_serial->manuf_descriptor.IonConfig);
 	}
 }
 
 
 /****************************************************************************
  * get_boot_desc
- *	reads in the bootloader descriptor and stores it into the serial 
+ *	reads in the bootloader descriptor and stores it into the serial
  *	structure.
  ****************************************************************************/
-static void get_boot_desc (struct edgeport_serial *edge_serial)
+static void get_boot_desc(struct edgeport_serial *edge_serial)
 {
 	int response;
 
 	dbg("getting boot descriptor");
 
-	response = rom_read (edge_serial->serial, (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, 
-			    (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), EDGE_BOOT_DESC_LEN,
-			    (__u8 *)(&edge_serial->boot_descriptor));
+	response = rom_read(edge_serial->serial,
+				(EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
+				(__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff),
+				EDGE_BOOT_DESC_LEN,
+				(__u8 *)(&edge_serial->boot_descriptor));
 
-	if (response < 1) {
-		dev_err(&edge_serial->serial->dev->dev, "error in getting boot descriptor\n");
-	} else {
+	if (response < 1)
+		dev_err(&edge_serial->serial->dev->dev,
+				"error in getting boot descriptor\n");
+	else {
 		dbg("**Boot Descriptor:");
-		dbg("  BootCodeLength: %d", le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
-		dbg("  MajorVersion:   %d", edge_serial->boot_descriptor.MajorVersion);
-		dbg("  MinorVersion:   %d", edge_serial->boot_descriptor.MinorVersion);
-		dbg("  BuildNumber:    %d", le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
-		dbg("  Capabilities:   0x%x", le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
-		dbg("  UConfig0:       %d", edge_serial->boot_descriptor.UConfig0);
-		dbg("  UConfig1:       %d", edge_serial->boot_descriptor.UConfig1);
+		dbg("  BootCodeLength: %d",
+		    le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
+		dbg("  MajorVersion:   %d",
+			edge_serial->boot_descriptor.MajorVersion);
+		dbg("  MinorVersion:   %d",
+			edge_serial->boot_descriptor.MinorVersion);
+		dbg("  BuildNumber:    %d",
+			le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
+		dbg("  Capabilities:   0x%x",
+		      le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
+		dbg("  UConfig0:       %d",
+			edge_serial->boot_descriptor.UConfig0);
+		dbg("  UConfig1:       %d",
+			edge_serial->boot_descriptor.UConfig1);
 	}
 }
 
@@ -2685,7 +2886,7 @@ static void get_boot_desc (struct edgeport_serial *edge_serial)
  * load_application_firmware
  *	This is called to load the application firmware to the device
  ****************************************************************************/
-static void load_application_firmware (struct edgeport_serial *edge_serial)
+static void load_application_firmware(struct edgeport_serial *edge_serial)
 {
 	const struct ihex_binrec *rec;
 	const struct firmware *fw;
@@ -2762,7 +2963,7 @@ static void load_application_firmware (struct edgeport_serial *edge_serial)
 /****************************************************************************
  * edge_startup
  ****************************************************************************/
-static int edge_startup (struct usb_serial *serial)
+static int edge_startup(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
@@ -2804,10 +3005,10 @@ static int edge_startup (struct usb_serial *serial)
 		       sizeof(struct edge_compatibility_bits));
 
 		/* get the manufacturing descriptor for this device */
-		get_manufacturing_desc (edge_serial);
+		get_manufacturing_desc(edge_serial);
 
 		/* get the boot descriptor */
-		get_boot_desc (edge_serial);
+		get_boot_desc(edge_serial);
 
 		get_product_info(edge_serial);
 	}
@@ -2828,41 +3029,43 @@ static int edge_startup (struct usb_serial *serial)
 	/* If not an EPiC device */
 	if (!edge_serial->is_epic) {
 		/* now load the application firmware into this device */
-		load_application_firmware (edge_serial);
+		load_application_firmware(edge_serial);
 
 		dbg("%s - time 2 %ld", __func__, jiffies);
 
 		/* Check current Edgeport EEPROM and update if necessary */
-		update_edgeport_E2PROM (edge_serial);
+		update_edgeport_E2PROM(edge_serial);
 
 		dbg("%s - time 3 %ld", __func__, jiffies);
 
 		/* set the configuration to use #1 */
-//		dbg("set_configuration 1");
-//		usb_set_configuration (dev, 1);
+/*		dbg("set_configuration 1"); */
+/*		usb_set_configuration (dev, 1); */
 	}
 	dbg("  FirmwareMajorVersion  %d.%d.%d",
 	    edge_serial->product_info.FirmwareMajorVersion,
 	    edge_serial->product_info.FirmwareMinorVersion,
 	    le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber));
 
-	/* we set up the pointers to the endpoints in the edge_open function, 
+	/* we set up the pointers to the endpoints in the edge_open function,
 	 * as the structures aren't created yet. */
 
 	/* set up our port private structures */
 	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = kmalloc (sizeof(struct edgeport_port), GFP_KERNEL);
+		edge_port = kmalloc(sizeof(struct edgeport_port), GFP_KERNEL);
 		if (edge_port == NULL) {
-			dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+			dev_err(&serial->dev->dev, "%s - Out of memory\n",
+								   __func__);
 			for (j = 0; j < i; ++j) {
-				kfree (usb_get_serial_port_data(serial->port[j]));
-				usb_set_serial_port_data(serial->port[j],  NULL);
+				kfree(usb_get_serial_port_data(serial->port[j]));
+				usb_set_serial_port_data(serial->port[j],
+									NULL);
 			}
 			usb_set_serial_data(serial, NULL);
 			kfree(edge_serial);
 			return -ENOMEM;
 		}
-		memset (edge_port, 0, sizeof(struct edgeport_port));
+		memset(edge_port, 0, sizeof(struct edgeport_port));
 		spin_lock_init(&edge_port->ep_lock);
 		edge_port->port = serial->port[i];
 		usb_set_serial_port_data(serial->port[i], edge_port);
@@ -2871,14 +3074,16 @@ static int edge_startup (struct usb_serial *serial)
 	response = 0;
 
 	if (edge_serial->is_epic) {
-		/* EPIC thing, set up our interrupt polling now and our read urb, so
-		 * that the device knows it really is connected. */
+		/* EPIC thing, set up our interrupt polling now and our read
+		 * urb, so that the device knows it really is connected. */
 		interrupt_in_found = bulk_in_found = bulk_out_found = false;
-		for (i = 0; i < serial->interface->altsetting[0].desc.bNumEndpoints; ++i) {
+		for (i = 0; i < serial->interface->altsetting[0]
+						.desc.bNumEndpoints; ++i) {
 			struct usb_endpoint_descriptor *endpoint;
 			int buffer_size;
 
-			endpoint = &serial->interface->altsetting[0].endpoint[i].desc;
+			endpoint = &serial->interface->altsetting[0].
+							endpoint[i].desc;
 			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 			if (!interrupt_in_found &&
 			    (usb_endpoint_is_int_in(endpoint))) {
@@ -2886,58 +3091,67 @@ static int edge_startup (struct usb_serial *serial)
 				dbg("found interrupt in");
 
 				/* not set up yet, so do it now */
-				edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL);
+				edge_serial->interrupt_read_urb =
+						usb_alloc_urb(0, GFP_KERNEL);
 				if (!edge_serial->interrupt_read_urb) {
 					err("out of memory");
 					return -ENOMEM;
 				}
-				edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+				edge_serial->interrupt_in_buffer =
+					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->interrupt_in_buffer) {
 					err("out of memory");
 					usb_free_urb(edge_serial->interrupt_read_urb);
 					return -ENOMEM;
 				}
-				edge_serial->interrupt_in_endpoint = endpoint->bEndpointAddress;
+				edge_serial->interrupt_in_endpoint =
+						endpoint->bEndpointAddress;
 
 				/* set up our interrupt urb */
-				usb_fill_int_urb(edge_serial->interrupt_read_urb,
-						 dev,
-						 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
-						 edge_serial->interrupt_in_buffer,
-						 buffer_size,
-						 edge_interrupt_callback,
-						 edge_serial,
-						 endpoint->bInterval);
+				usb_fill_int_urb(
+					edge_serial->interrupt_read_urb,
+					dev,
+					usb_rcvintpipe(dev,
+						endpoint->bEndpointAddress),
+					edge_serial->interrupt_in_buffer,
+					buffer_size,
+					edge_interrupt_callback,
+					edge_serial,
+					endpoint->bInterval);
 
 				interrupt_in_found = true;
 			}
 
 			if (!bulk_in_found &&
-			    (usb_endpoint_is_bulk_in(endpoint))) {
+				(usb_endpoint_is_bulk_in(endpoint))) {
 				/* we found a bulk in endpoint */
 				dbg("found bulk in");
 
 				/* not set up yet, so do it now */
-				edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL);
+				edge_serial->read_urb =
+						usb_alloc_urb(0, GFP_KERNEL);
 				if (!edge_serial->read_urb) {
 					err("out of memory");
 					return -ENOMEM;
 				}
-				edge_serial->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+				edge_serial->bulk_in_buffer =
+					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->bulk_in_buffer) {
-					err ("out of memory");
+					err("out of memory");
 					usb_free_urb(edge_serial->read_urb);
 					return -ENOMEM;
 				}
-				edge_serial->bulk_in_endpoint = endpoint->bEndpointAddress;
+				edge_serial->bulk_in_endpoint =
+						endpoint->bEndpointAddress;
 
 				/* set up our bulk in urb */
 				usb_fill_bulk_urb(edge_serial->read_urb, dev,
-						  usb_rcvbulkpipe(dev, endpoint->bEndpointAddress),
-						  edge_serial->bulk_in_buffer,
-						  le16_to_cpu(endpoint->wMaxPacketSize),
-						  edge_bulk_in_callback,
-						  edge_serial);
+					usb_rcvbulkpipe(dev,
+						endpoint->bEndpointAddress),
+					edge_serial->bulk_in_buffer,
+					le16_to_cpu(endpoint->wMaxPacketSize),
+					edge_bulk_in_callback,
+					edge_serial);
 				bulk_in_found = true;
 			}
 
@@ -2945,21 +3159,24 @@ static int edge_startup (struct usb_serial *serial)
 			    (usb_endpoint_is_bulk_out(endpoint))) {
 				/* we found a bulk out endpoint */
 				dbg("found bulk out");
-				edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress;
+				edge_serial->bulk_out_endpoint =
+						endpoint->bEndpointAddress;
 				bulk_out_found = true;
 			}
 		}
 
 		if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
-			err ("Error - the proper endpoints were not found!");
+			err("Error - the proper endpoints were not found!");
 			return -ENODEV;
 		}
 
 		/* start interrupt read for this edgeport this interrupt will
 		 * continue as long as the edgeport is connected */
-		response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL);
+		response = usb_submit_urb(edge_serial->interrupt_read_urb,
+								GFP_KERNEL);
 		if (response)
-			err("%s - Error %d submitting control urb", __func__, response);
+			err("%s - Error %d submitting control urb",
+							__func__, response);
 	}
 	return response;
 }
@@ -2969,7 +3186,7 @@ static int edge_startup (struct usb_serial *serial)
  * edge_shutdown
  *	This function is called whenever the device is removed from the usb bus.
  ****************************************************************************/
-static void edge_shutdown (struct usb_serial *serial)
+static void edge_shutdown(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
 	int i;
@@ -2977,8 +3194,8 @@ static void edge_shutdown (struct usb_serial *serial)
 	dbg("%s", __func__);
 
 	/* stop reads and writes on all ports */
-	for (i=0; i < serial->num_ports; ++i) {
-		kfree (usb_get_serial_port_data(serial->port[i]));
+	for (i = 0; i < serial->num_ports; ++i) {
+		kfree(usb_get_serial_port_data(serial->port[i]));
 		usb_set_serial_port_data(serial->port[i],  NULL);
 	}
 	/* free up our endpoint stuff */
@@ -3018,7 +3235,7 @@ static int __init edgeport_init(void)
 	if (retval)
 		goto failed_epic_device_register;
 	retval = usb_register(&io_driver);
-	if (retval) 
+	if (retval)
 		goto failed_usb_register;
 	atomic_set(&CmdUrbs, 0);
 	info(DRIVER_DESC " " DRIVER_VERSION);
@@ -3043,19 +3260,19 @@ failed_2port_device_register:
  ****************************************************************************/
 static void __exit edgeport_exit (void)
 {
-	usb_deregister (&io_driver);
-	usb_serial_deregister (&edgeport_2port_device);
-	usb_serial_deregister (&edgeport_4port_device);
-	usb_serial_deregister (&edgeport_8port_device);
-	usb_serial_deregister (&epic_device);
+	usb_deregister(&io_driver);
+	usb_serial_deregister(&edgeport_2port_device);
+	usb_serial_deregister(&edgeport_4port_device);
+	usb_serial_deregister(&edgeport_8port_device);
+	usb_serial_deregister(&epic_device);
 }
 
 module_init(edgeport_init);
 module_exit(edgeport_exit);
 
 /* Module information */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE("edgeport/boot.fw");
 MODULE_FIRMWARE("edgeport/boot2.fw");
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 2ec85893f27..7eb9d67b81b 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -8,7 +8,7 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- * 
+ *
  */
 
 #ifndef IO_TABLES_H
@@ -90,10 +90,10 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
 	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
 	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
-	{ }							/* Terminating entry */
+	{ } /* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver io_driver = {
 	.name =		"io_edgeport",
-- 
cgit v1.2.3


From d76f2f4462bbb2cf7bc83a35c5278177aa627e89 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:16:42 +0100
Subject: io_edgeport: Fix various bogus returns to the tty layer

The edgeport reports negative error codes to functions that do not
expect them. This can cause ports to jam forever

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/io_edgeport.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index b4bd6847a96..bfa508ddb0f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1404,15 +1404,15 @@ static int edge_write_room(struct tty_struct *tty)
 	dbg("%s", __func__);
 
 	if (edge_port == NULL)
-		return -ENODEV;
+		return 0;
 	if (edge_port->closePending)
-		return -ENODEV;
+		return 0;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	if (!edge_port->open) {
 		dbg("%s - port not opened", __func__);
-		return -EINVAL;
+		return 0;
 	}
 
 	/* total of both buffers is still txCredit */
@@ -1444,13 +1444,13 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
 	dbg("%s", __func__);
 
 	if (edge_port == NULL)
-		return -ENODEV;
+		return 0;
 	if (edge_port->closePending)
-		return -ENODEV;
+		return 0;
 
 	if (!edge_port->open) {
 		dbg("%s - port not opened", __func__);
-		return -EINVAL;
+		return 0;
 	}
 
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
-- 
cgit v1.2.3


From 01e1abb2c27e43339b8829a2e3b1c6f53806b77a Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:16:55 +0100
Subject: tty: Split ldisc code into its own file

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/Makefile    |   2 +-
 drivers/char/tty_io.c    | 636 +----------------------------------------
 drivers/char/tty_ldisc.c | 714 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/tty.h      |  11 +-
 4 files changed, 733 insertions(+), 630 deletions(-)
 create mode 100644 drivers/char/tty_ldisc.c

diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 0e0d12a0646..dc5a327d72d 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -7,7 +7,7 @@
 #
 FONTMAPFILE = cp437.uni
 
-obj-y	 += mem.o random.o tty_io.o n_tty.o tty_ioctl.o
+obj-y	 += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o 
 
 obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
 obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 82f6a8c8633..d27a08b374d 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -655,558 +655,6 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
 
 
 
-/**
- *	tty_set_termios_ldisc		-	set ldisc field
- *	@tty: tty structure
- *	@num: line discipline number
- *
- *	This is probably overkill for real world processors but
- *	they are not on hot paths so a little discipline won't do
- *	any harm.
- *
- *	Locking: takes termios_mutex
- */
-
-static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
-{
-	mutex_lock(&tty->termios_mutex);
-	tty->termios->c_line = num;
-	mutex_unlock(&tty->termios_mutex);
-}
-
-/*
- *	This guards the refcounted line discipline lists. The lock
- *	must be taken with irqs off because there are hangup path
- *	callers who will do ldisc lookups and cannot sleep.
- */
-
-static DEFINE_SPINLOCK(tty_ldisc_lock);
-static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
-/* Line disc dispatch table */
-static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
-
-/**
- *	tty_register_ldisc	-	install a line discipline
- *	@disc: ldisc number
- *	@new_ldisc: pointer to the ldisc object
- *
- *	Installs a new line discipline into the kernel. The discipline
- *	is set up as unreferenced and then made available to the kernel
- *	from this point onwards.
- *
- *	Locking:
- *		takes tty_ldisc_lock to guard against ldisc races
- */
-
-int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	if (disc < N_TTY || disc >= NR_LDISCS)
-		return -EINVAL;
-
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	tty_ldiscs[disc] = new_ldisc;
-	new_ldisc->num = disc;
-	new_ldisc->refcount = 0;
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(tty_register_ldisc);
-
-/**
- *	tty_unregister_ldisc	-	unload a line discipline
- *	@disc: ldisc number
- *	@new_ldisc: pointer to the ldisc object
- *
- *	Remove a line discipline from the kernel providing it is not
- *	currently in use.
- *
- *	Locking:
- *		takes tty_ldisc_lock to guard against ldisc races
- */
-
-int tty_unregister_ldisc(int disc)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	if (disc < N_TTY || disc >= NR_LDISCS)
-		return -EINVAL;
-
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	if (tty_ldiscs[disc]->refcount)
-		ret = -EBUSY;
-	else
-		tty_ldiscs[disc] = NULL;
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(tty_unregister_ldisc);
-
-
-/**
- *	tty_ldisc_try_get	-	try and reference an ldisc
- *	@disc: ldisc number
- *	@ld: tty ldisc structure to complete
- *
- *	Attempt to open and lock a line discipline into place. Return
- *	the line discipline refcounted and assigned in ld. On an error
- *	report the error code back
- */
-
-static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
-{
-	unsigned long flags;
-	struct tty_ldisc_ops *ldops;
-	int err = -EINVAL;
-	
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld->ops = NULL;
-	ldops = tty_ldiscs[disc];
-	/* Check the entry is defined */
-	if (ldops) {
-		/* If the module is being unloaded we can't use it */
-		if (!try_module_get(ldops->owner))
-			err = -EAGAIN;
-		else {
-			/* lock it */
-			ldops->refcount++;
-			ld->ops = ldops;
-			err = 0;
-		}
-	}
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	return err;
-}
-
-/**
- *	tty_ldisc_get		-	take a reference to an ldisc
- *	@disc: ldisc number
- *	@ld: tty line discipline structure to use
- *
- *	Takes a reference to a line discipline. Deals with refcounts and
- *	module locking counts. Returns NULL if the discipline is not available.
- *	Returns a pointer to the discipline and bumps the ref count if it is
- *	available
- *
- *	Locking:
- *		takes tty_ldisc_lock to guard against ldisc races
- */
-
-static int tty_ldisc_get(int disc, struct tty_ldisc *ld)
-{
-	int err;
-
-	if (disc < N_TTY || disc >= NR_LDISCS)
-		return -EINVAL;
-	err = tty_ldisc_try_get(disc, ld);
-	if (err == -EAGAIN) {
-		request_module("tty-ldisc-%d", disc);
-		err = tty_ldisc_try_get(disc, ld);
-	}
-	return err;
-}
-
-/**
- *	tty_ldisc_put		-	drop ldisc reference
- *	@disc: ldisc number
- *
- *	Drop a reference to a line discipline. Manage refcounts and
- *	module usage counts
- *
- *	Locking:
- *		takes tty_ldisc_lock to guard against ldisc races
- */
-
-static void tty_ldisc_put(struct tty_ldisc_ops *ld)
-{
-	unsigned long flags;
-	int disc = ld->num;
-
-	BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
-
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld = tty_ldiscs[disc];
-	BUG_ON(ld->refcount == 0);
-	ld->refcount--;
-	module_put(ld->owner);
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-}
-
-static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
-{
-	return (*pos < NR_LDISCS) ? pos : NULL;
-}
-
-static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	(*pos)++;
-	return (*pos < NR_LDISCS) ? pos : NULL;
-}
-
-static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
-{
-}
-
-static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
-{
-	int i = *(loff_t *)v;
-	struct tty_ldisc ld;
-	
-	if (tty_ldisc_get(i, &ld) < 0)
-		return 0;
-	seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i);
-	tty_ldisc_put(ld.ops);
-	return 0;
-}
-
-static const struct seq_operations tty_ldiscs_seq_ops = {
-	.start	= tty_ldiscs_seq_start,
-	.next	= tty_ldiscs_seq_next,
-	.stop	= tty_ldiscs_seq_stop,
-	.show	= tty_ldiscs_seq_show,
-};
-
-static int proc_tty_ldiscs_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &tty_ldiscs_seq_ops);
-}
-
-const struct file_operations tty_ldiscs_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= proc_tty_ldiscs_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-/**
- *	tty_ldisc_assign	-	set ldisc on a tty
- *	@tty: tty to assign
- *	@ld: line discipline
- *
- *	Install an instance of a line discipline into a tty structure. The
- *	ldisc must have a reference count above zero to ensure it remains/
- *	The tty instance refcount starts at zero.
- *
- *	Locking:
- *		Caller must hold references
- */
-
-static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
-{
-	ld->refcount = 0;
-	tty->ldisc = *ld;
-}
-
-/**
- *	tty_ldisc_try		-	internal helper
- *	@tty: the tty
- *
- *	Make a single attempt to grab and bump the refcount on
- *	the tty ldisc. Return 0 on failure or 1 on success. This is
- *	used to implement both the waiting and non waiting versions
- *	of tty_ldisc_ref
- *
- *	Locking: takes tty_ldisc_lock
- */
-
-static int tty_ldisc_try(struct tty_struct *tty)
-{
-	unsigned long flags;
-	struct tty_ldisc *ld;
-	int ret = 0;
-
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld = &tty->ldisc;
-	if (test_bit(TTY_LDISC, &tty->flags)) {
-		ld->refcount++;
-		ret = 1;
-	}
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	return ret;
-}
-
-/**
- *	tty_ldisc_ref_wait	-	wait for the tty ldisc
- *	@tty: tty device
- *
- *	Dereference the line discipline for the terminal and take a
- *	reference to it. If the line discipline is in flux then
- *	wait patiently until it changes.
- *
- *	Note: Must not be called from an IRQ/timer context. The caller
- *	must also be careful not to hold other locks that will deadlock
- *	against a discipline change, such as an existing ldisc reference
- *	(which we check for)
- *
- *	Locking: call functions take tty_ldisc_lock
- */
-
-struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
-{
-	/* wait_event is a macro */
-	wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
-	if (tty->ldisc.refcount == 0)
-		printk(KERN_ERR "tty_ldisc_ref_wait\n");
-	return &tty->ldisc;
-}
-
-EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
-
-/**
- *	tty_ldisc_ref		-	get the tty ldisc
- *	@tty: tty device
- *
- *	Dereference the line discipline for the terminal and take a
- *	reference to it. If the line discipline is in flux then
- *	return NULL. Can be called from IRQ and timer functions.
- *
- *	Locking: called functions take tty_ldisc_lock
- */
-
-struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
-{
-	if (tty_ldisc_try(tty))
-		return &tty->ldisc;
-	return NULL;
-}
-
-EXPORT_SYMBOL_GPL(tty_ldisc_ref);
-
-/**
- *	tty_ldisc_deref		-	free a tty ldisc reference
- *	@ld: reference to free up
- *
- *	Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
- *	be called in IRQ context.
- *
- *	Locking: takes tty_ldisc_lock
- */
-
-void tty_ldisc_deref(struct tty_ldisc *ld)
-{
-	unsigned long flags;
-
-	BUG_ON(ld == NULL);
-
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	if (ld->refcount == 0)
-		printk(KERN_ERR "tty_ldisc_deref: no references.\n");
-	else
-		ld->refcount--;
-	if (ld->refcount == 0)
-		wake_up(&tty_ldisc_wait);
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-}
-
-EXPORT_SYMBOL_GPL(tty_ldisc_deref);
-
-/**
- *	tty_ldisc_enable	-	allow ldisc use
- *	@tty: terminal to activate ldisc on
- *
- *	Set the TTY_LDISC flag when the line discipline can be called
- *	again. Do necessary wakeups for existing sleepers.
- *
- *	Note: nobody should set this bit except via this function. Clearing
- *	directly is allowed.
- */
-
-static void tty_ldisc_enable(struct tty_struct *tty)
-{
-	set_bit(TTY_LDISC, &tty->flags);
-	wake_up(&tty_ldisc_wait);
-}
-
-/**
- *	tty_ldisc_restore	-	helper for tty ldisc change
- *	@tty: tty to recover
- *	@old: previous ldisc
- *
- *	Restore the previous line discipline or N_TTY when a line discipline
- *	change fails due to an open error
- */
-
-static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
-{
-	char buf[64];
-	struct tty_ldisc new_ldisc;
-
-	/* There is an outstanding reference here so this is safe */
-	tty_ldisc_get(old->ops->num, old);
-	tty_ldisc_assign(tty, old);
-	tty_set_termios_ldisc(tty, old->ops->num);
-	if (old->ops->open && (old->ops->open(tty) < 0)) {
-		tty_ldisc_put(old->ops);
-		/* This driver is always present */
-		if (tty_ldisc_get(N_TTY, &new_ldisc) < 0)
-			panic("n_tty: get");
-		tty_ldisc_assign(tty, &new_ldisc);
-		tty_set_termios_ldisc(tty, N_TTY);
-		if (new_ldisc.ops->open) {
-			int r = new_ldisc.ops->open(tty);
-				if (r < 0)
-				panic("Couldn't open N_TTY ldisc for "
-				      "%s --- error %d.",
-				      tty_name(tty, buf), r);
-		}
-	}
-}
-
-/**
- *	tty_set_ldisc		-	set line discipline
- *	@tty: the terminal to set
- *	@ldisc: the line discipline
- *
- *	Set the discipline of a tty line. Must be called from a process
- *	context.
- *
- *	Locking: takes tty_ldisc_lock.
- *		 called functions take termios_mutex
- */
-
-static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
-{
-	int retval;
-	struct tty_ldisc o_ldisc, new_ldisc;
-	int work;
-	unsigned long flags;
-	struct tty_struct *o_tty;
-
-restart:
-	/* This is a bit ugly for now but means we can break the 'ldisc
-	   is part of the tty struct' assumption later */
-	retval = tty_ldisc_get(ldisc, &new_ldisc);
-	if (retval)
-		return retval;
-
-	/*
-	 *	Problem: What do we do if this blocks ?
-	 */
-
-	tty_wait_until_sent(tty, 0);
-
-	if (tty->ldisc.ops->num == ldisc) {
-		tty_ldisc_put(new_ldisc.ops);
-		return 0;
-	}
-
-	/*
-	 *	No more input please, we are switching. The new ldisc
-	 *	will update this value in the ldisc open function
-	 */
-
-	tty->receive_room = 0;
-
-	o_ldisc = tty->ldisc;
-	o_tty = tty->link;
-
-	/*
-	 *	Make sure we don't change while someone holds a
-	 *	reference to the line discipline. The TTY_LDISC bit
-	 *	prevents anyone taking a reference once it is clear.
-	 *	We need the lock to avoid racing reference takers.
-	 */
-
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) {
-		if (tty->ldisc.refcount) {
-			/* Free the new ldisc we grabbed. Must drop the lock
-			   first. */
-			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-			tty_ldisc_put(o_ldisc.ops);
-			/*
-			 * There are several reasons we may be busy, including
-			 * random momentary I/O traffic. We must therefore
-			 * retry. We could distinguish between blocking ops
-			 * and retries if we made tty_ldisc_wait() smarter.
-			 * That is up for discussion.
-			 */
-			if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0)
-				return -ERESTARTSYS;
-			goto restart;
-		}
-		if (o_tty && o_tty->ldisc.refcount) {
-			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-			tty_ldisc_put(o_tty->ldisc.ops);
-			if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0)
-				return -ERESTARTSYS;
-			goto restart;
-		}
-	}
-	/*
-	 *	If the TTY_LDISC bit is set, then we are racing against
-	 *	another ldisc change
-	 */
-	if (!test_bit(TTY_LDISC, &tty->flags)) {
-		struct tty_ldisc *ld;
-		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-		tty_ldisc_put(new_ldisc.ops);
-		ld = tty_ldisc_ref_wait(tty);
-		tty_ldisc_deref(ld);
-		goto restart;
-	}
-
-	clear_bit(TTY_LDISC, &tty->flags);
-	if (o_tty)
-		clear_bit(TTY_LDISC, &o_tty->flags);
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	
-	/*
-	 *	From this point on we know nobody has an ldisc
-	 *	usage reference, nor can they obtain one until
-	 *	we say so later on.
-	 */
-
-	work = cancel_delayed_work(&tty->buf.work);
-	/*
-	 * Wait for ->hangup_work and ->buf.work handlers to terminate
-	 * MUST NOT hold locks here.
-	 */
-	flush_scheduled_work();
-	/* Shutdown the current discipline. */
-	if (o_ldisc.ops->close)
-		(o_ldisc.ops->close)(tty);
-
-	/* Now set up the new line discipline. */
-	tty_ldisc_assign(tty, &new_ldisc);
-	tty_set_termios_ldisc(tty, ldisc);
-	if (new_ldisc.ops->open)
-		retval = (new_ldisc.ops->open)(tty);
-	if (retval < 0) {
-		tty_ldisc_put(new_ldisc.ops);
-		tty_ldisc_restore(tty, &o_ldisc);
-	}
-	/* At this point we hold a reference to the new ldisc and a
-	   a reference to the old ldisc. If we ended up flipping back
-	   to the existing ldisc we have two references to it */
-
-	if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc)
-		tty->ops->set_ldisc(tty);
-
-	tty_ldisc_put(o_ldisc.ops);
-
-	/*
-	 *	Allow ldisc referencing to occur as soon as the driver
-	 *	ldisc callback completes.
-	 */
-
-	tty_ldisc_enable(tty);
-	if (o_tty)
-		tty_ldisc_enable(o_tty);
-
-	/* Restart it in case no characters kick it off. Safe if
-	   already running */
-	if (work)
-		schedule_delayed_work(&tty->buf.work, 1);
-	return retval;
-}
-
 /**
  *	get_tty_driver		-	find device of a tty
  *	@dev_t: device identifier
@@ -2193,7 +1641,6 @@ static int init_dev(struct tty_driver *driver, int idx,
 	struct ktermios *tp, **tp_loc, *o_tp, **o_tp_loc;
 	struct ktermios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
 	int retval = 0;
-	struct tty_ldisc *ld;
 
 	/* check whether we're reopening an existing tty */
 	if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
@@ -2342,25 +1789,12 @@ static int init_dev(struct tty_driver *driver, int idx,
 	 * If we fail here just call release_tty to clean up.  No need
 	 * to decrement the use counts, as release_tty doesn't care.
 	 */
-	 
-	ld = &tty->ldisc;
 
-	if (ld->ops->open) {
-		retval = (ld->ops->open)(tty);
-		if (retval)
-			goto release_mem_out;
-	}
-	if (o_tty && o_tty->ldisc.ops->open) {
-		retval = (o_tty->ldisc.ops->open)(o_tty);
-		if (retval) {
-			if (ld->ops->close)
-				(ld->ops->close)(tty);
-			goto release_mem_out;
-		}
-		tty_ldisc_enable(o_tty);
-	}
-	tty_ldisc_enable(tty);
-	goto success;
+	retval = tty_ldisc_setup(tty, o_tty);
+
+	if (retval)
+		goto release_mem_out;
+	 goto success;
 
 	/*
 	 * This fast open can be used if the tty is already open.
@@ -2498,12 +1932,10 @@ static void release_tty(struct tty_struct *tty, int idx)
 static void release_dev(struct file *filp)
 {
 	struct tty_struct *tty, *o_tty;
-	struct tty_ldisc ld;
 	int	pty_master, tty_closing, o_tty_closing, do_sleep;
 	int	devpts;
 	int	idx;
 	char	buf[64];
-	unsigned long flags;
 
 	tty = (struct tty_struct *)filp->private_data;
 	if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode,
@@ -2705,56 +2137,9 @@ static void release_dev(struct file *filp)
 	printk(KERN_DEBUG "freeing tty structure...");
 #endif
 	/*
-	 * Prevent flush_to_ldisc() from rescheduling the work for later.  Then
-	 * kill any delayed work. As this is the final close it does not
-	 * race with the set_ldisc code path.
-	 */
-	clear_bit(TTY_LDISC, &tty->flags);
-	cancel_delayed_work(&tty->buf.work);
-
-	/*
-	 * Wait for ->hangup_work and ->buf.work handlers to terminate
-	 */
-
-	flush_scheduled_work();
-
-	/*
-	 * Wait for any short term users (we know they are just driver
-	 * side waiters as the file is closing so user count on the file
-	 * side is zero.
+	 * Ask the line discipline code to release its structures
 	 */
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	while (tty->ldisc.refcount) {
-		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-		wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0);
-		spin_lock_irqsave(&tty_ldisc_lock, flags);
-	}
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	/*
-	 * Shutdown the current line discipline, and reset it to N_TTY.
-	 *
-	 * FIXME: this MUST get fixed for the new reflocking
-	 */
-	if (tty->ldisc.ops->close)
-		(tty->ldisc.ops->close)(tty);
-	tty_ldisc_put(tty->ldisc.ops);
-
-	/*
-	 *	Switch the line discipline back
-	 */
-	WARN_ON(tty_ldisc_get(N_TTY, &ld));
-	tty_ldisc_assign(tty, &ld);
-	tty_set_termios_ldisc(tty, N_TTY);
-	if (o_tty) {
-		/* FIXME: could o_tty be in setldisc here ? */
-		clear_bit(TTY_LDISC, &o_tty->flags);
-		if (o_tty->ldisc.ops->close)
-			(o_tty->ldisc.ops->close)(o_tty);
-		tty_ldisc_put(o_tty->ldisc.ops);
-		WARN_ON(tty_ldisc_get(N_TTY, &ld));
-		tty_ldisc_assign(o_tty, &ld);
-		tty_set_termios_ldisc(o_tty, N_TTY);
-	}
+	tty_ldisc_release(tty, o_tty);
 	/*
 	 * The release_tty function takes care of the details of clearing
 	 * the slots and preserving the termios structure.
@@ -3962,12 +3347,9 @@ EXPORT_SYMBOL(tty_flip_buffer_push);
 
 static void initialize_tty_struct(struct tty_struct *tty)
 {
-	struct tty_ldisc ld;
 	memset(tty, 0, sizeof(struct tty_struct));
 	tty->magic = TTY_MAGIC;
-	if (tty_ldisc_get(N_TTY, &ld) < 0)
-		panic("n_tty: init_tty");
-	tty_ldisc_assign(tty, &ld);
+	tty_ldisc_init(tty);
 	tty->session = NULL;
 	tty->pgrp = NULL;
 	tty->overrun_time = jiffies;
@@ -4280,7 +3662,7 @@ void __init console_init(void)
 	initcall_t *call;
 
 	/* Setup the default TTY line discipline. */
-	(void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY);
+	tty_ldisc_begin();
 
 	/*
 	 * set up the console device so that later boot sequences can
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
new file mode 100644
index 00000000000..241cbdea65a
--- /dev/null
+++ b/drivers/char/tty_ldisc.c
@@ -0,0 +1,714 @@
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/fcntl.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/devpts_fs.h>
+#include <linux/file.h>
+#include <linux/fdtable.h>
+#include <linux/console.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/kd.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/smp_lock.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+
+#include <linux/uaccess.h>
+#include <asm/system.h>
+
+#include <linux/kbd_kern.h>
+#include <linux/vt_kern.h>
+#include <linux/selection.h>
+
+#include <linux/kmod.h>
+#include <linux/nsproxy.h>
+
+/*
+ *	This guards the refcounted line discipline lists. The lock
+ *	must be taken with irqs off because there are hangup path
+ *	callers who will do ldisc lookups and cannot sleep.
+ */
+
+static DEFINE_SPINLOCK(tty_ldisc_lock);
+static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
+/* Line disc dispatch table */
+static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
+
+/**
+ *	tty_register_ldisc	-	install a line discipline
+ *	@disc: ldisc number
+ *	@new_ldisc: pointer to the ldisc object
+ *
+ *	Installs a new line discipline into the kernel. The discipline
+ *	is set up as unreferenced and then made available to the kernel
+ *	from this point onwards.
+ *
+ *	Locking:
+ *		takes tty_ldisc_lock to guard against ldisc races
+ */
+
+int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	if (disc < N_TTY || disc >= NR_LDISCS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	tty_ldiscs[disc] = new_ldisc;
+	new_ldisc->num = disc;
+	new_ldisc->refcount = 0;
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(tty_register_ldisc);
+
+/**
+ *	tty_unregister_ldisc	-	unload a line discipline
+ *	@disc: ldisc number
+ *	@new_ldisc: pointer to the ldisc object
+ *
+ *	Remove a line discipline from the kernel providing it is not
+ *	currently in use.
+ *
+ *	Locking:
+ *		takes tty_ldisc_lock to guard against ldisc races
+ */
+
+int tty_unregister_ldisc(int disc)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	if (disc < N_TTY || disc >= NR_LDISCS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	if (tty_ldiscs[disc]->refcount)
+		ret = -EBUSY;
+	else
+		tty_ldiscs[disc] = NULL;
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(tty_unregister_ldisc);
+
+
+/**
+ *	tty_ldisc_try_get	-	try and reference an ldisc
+ *	@disc: ldisc number
+ *	@ld: tty ldisc structure to complete
+ *
+ *	Attempt to open and lock a line discipline into place. Return
+ *	the line discipline refcounted and assigned in ld. On an error
+ *	report the error code back
+ */
+
+static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
+{
+	unsigned long flags;
+	struct tty_ldisc_ops *ldops;
+	int err = -EINVAL;
+	
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	ld->ops = NULL;
+	ldops = tty_ldiscs[disc];
+	/* Check the entry is defined */
+	if (ldops) {
+		/* If the module is being unloaded we can't use it */
+		if (!try_module_get(ldops->owner))
+			err = -EAGAIN;
+		else {
+			/* lock it */
+			ldops->refcount++;
+			ld->ops = ldops;
+			err = 0;
+		}
+	}
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	return err;
+}
+
+/**
+ *	tty_ldisc_get		-	take a reference to an ldisc
+ *	@disc: ldisc number
+ *	@ld: tty line discipline structure to use
+ *
+ *	Takes a reference to a line discipline. Deals with refcounts and
+ *	module locking counts. Returns NULL if the discipline is not available.
+ *	Returns a pointer to the discipline and bumps the ref count if it is
+ *	available
+ *
+ *	Locking:
+ *		takes tty_ldisc_lock to guard against ldisc races
+ */
+
+static int tty_ldisc_get(int disc, struct tty_ldisc *ld)
+{
+	int err;
+
+	if (disc < N_TTY || disc >= NR_LDISCS)
+		return -EINVAL;
+	err = tty_ldisc_try_get(disc, ld);
+	if (err == -EAGAIN) {
+		request_module("tty-ldisc-%d", disc);
+		err = tty_ldisc_try_get(disc, ld);
+	}
+	return err;
+}
+
+/**
+ *	tty_ldisc_put		-	drop ldisc reference
+ *	@disc: ldisc number
+ *
+ *	Drop a reference to a line discipline. Manage refcounts and
+ *	module usage counts
+ *
+ *	Locking:
+ *		takes tty_ldisc_lock to guard against ldisc races
+ */
+
+static void tty_ldisc_put(struct tty_ldisc_ops *ld)
+{
+	unsigned long flags;
+	int disc = ld->num;
+
+	BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
+
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	ld = tty_ldiscs[disc];
+	BUG_ON(ld->refcount == 0);
+	ld->refcount--;
+	module_put(ld->owner);
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+}
+
+static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
+{
+	return (*pos < NR_LDISCS) ? pos : NULL;
+}
+
+static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	(*pos)++;
+	return (*pos < NR_LDISCS) ? pos : NULL;
+}
+
+static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
+{
+}
+
+static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
+{
+	int i = *(loff_t *)v;
+	struct tty_ldisc ld;
+	
+	if (tty_ldisc_get(i, &ld) < 0)
+		return 0;
+	seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i);
+	tty_ldisc_put(ld.ops);
+	return 0;
+}
+
+static const struct seq_operations tty_ldiscs_seq_ops = {
+	.start	= tty_ldiscs_seq_start,
+	.next	= tty_ldiscs_seq_next,
+	.stop	= tty_ldiscs_seq_stop,
+	.show	= tty_ldiscs_seq_show,
+};
+
+static int proc_tty_ldiscs_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &tty_ldiscs_seq_ops);
+}
+
+const struct file_operations tty_ldiscs_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= proc_tty_ldiscs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+/**
+ *	tty_ldisc_assign	-	set ldisc on a tty
+ *	@tty: tty to assign
+ *	@ld: line discipline
+ *
+ *	Install an instance of a line discipline into a tty structure. The
+ *	ldisc must have a reference count above zero to ensure it remains/
+ *	The tty instance refcount starts at zero.
+ *
+ *	Locking:
+ *		Caller must hold references
+ */
+
+static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
+{
+	ld->refcount = 0;
+	tty->ldisc = *ld;
+}
+
+/**
+ *	tty_ldisc_try		-	internal helper
+ *	@tty: the tty
+ *
+ *	Make a single attempt to grab and bump the refcount on
+ *	the tty ldisc. Return 0 on failure or 1 on success. This is
+ *	used to implement both the waiting and non waiting versions
+ *	of tty_ldisc_ref
+ *
+ *	Locking: takes tty_ldisc_lock
+ */
+
+static int tty_ldisc_try(struct tty_struct *tty)
+{
+	unsigned long flags;
+	struct tty_ldisc *ld;
+	int ret = 0;
+
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	ld = &tty->ldisc;
+	if (test_bit(TTY_LDISC, &tty->flags)) {
+		ld->refcount++;
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	return ret;
+}
+
+/**
+ *	tty_ldisc_ref_wait	-	wait for the tty ldisc
+ *	@tty: tty device
+ *
+ *	Dereference the line discipline for the terminal and take a
+ *	reference to it. If the line discipline is in flux then
+ *	wait patiently until it changes.
+ *
+ *	Note: Must not be called from an IRQ/timer context. The caller
+ *	must also be careful not to hold other locks that will deadlock
+ *	against a discipline change, such as an existing ldisc reference
+ *	(which we check for)
+ *
+ *	Locking: call functions take tty_ldisc_lock
+ */
+
+struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
+{
+	/* wait_event is a macro */
+	wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
+	if (tty->ldisc.refcount == 0)
+		printk(KERN_ERR "tty_ldisc_ref_wait\n");
+	return &tty->ldisc;
+}
+
+EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
+
+/**
+ *	tty_ldisc_ref		-	get the tty ldisc
+ *	@tty: tty device
+ *
+ *	Dereference the line discipline for the terminal and take a
+ *	reference to it. If the line discipline is in flux then
+ *	return NULL. Can be called from IRQ and timer functions.
+ *
+ *	Locking: called functions take tty_ldisc_lock
+ */
+
+struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
+{
+	if (tty_ldisc_try(tty))
+		return &tty->ldisc;
+	return NULL;
+}
+
+EXPORT_SYMBOL_GPL(tty_ldisc_ref);
+
+/**
+ *	tty_ldisc_deref		-	free a tty ldisc reference
+ *	@ld: reference to free up
+ *
+ *	Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
+ *	be called in IRQ context.
+ *
+ *	Locking: takes tty_ldisc_lock
+ */
+
+void tty_ldisc_deref(struct tty_ldisc *ld)
+{
+	unsigned long flags;
+
+	BUG_ON(ld == NULL);
+
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	if (ld->refcount == 0)
+		printk(KERN_ERR "tty_ldisc_deref: no references.\n");
+	else
+		ld->refcount--;
+	if (ld->refcount == 0)
+		wake_up(&tty_ldisc_wait);
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+}
+
+EXPORT_SYMBOL_GPL(tty_ldisc_deref);
+
+/**
+ *	tty_ldisc_enable	-	allow ldisc use
+ *	@tty: terminal to activate ldisc on
+ *
+ *	Set the TTY_LDISC flag when the line discipline can be called
+ *	again. Do necessary wakeups for existing sleepers.
+ *
+ *	Note: nobody should set this bit except via this function. Clearing
+ *	directly is allowed.
+ */
+
+void tty_ldisc_enable(struct tty_struct *tty)
+{
+	set_bit(TTY_LDISC, &tty->flags);
+	wake_up(&tty_ldisc_wait);
+}
+
+/**
+ *	tty_set_termios_ldisc		-	set ldisc field
+ *	@tty: tty structure
+ *	@num: line discipline number
+ *
+ *	This is probably overkill for real world processors but
+ *	they are not on hot paths so a little discipline won't do
+ *	any harm.
+ *
+ *	Locking: takes termios_mutex
+ */
+
+static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
+{
+	mutex_lock(&tty->termios_mutex);
+	tty->termios->c_line = num;
+	mutex_unlock(&tty->termios_mutex);
+}
+
+
+/**
+ *	tty_ldisc_restore	-	helper for tty ldisc change
+ *	@tty: tty to recover
+ *	@old: previous ldisc
+ *
+ *	Restore the previous line discipline or N_TTY when a line discipline
+ *	change fails due to an open error
+ */
+
+static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
+{
+	char buf[64];
+	struct tty_ldisc new_ldisc;
+
+	/* There is an outstanding reference here so this is safe */
+	tty_ldisc_get(old->ops->num, old);
+	tty_ldisc_assign(tty, old);
+	tty_set_termios_ldisc(tty, old->ops->num);
+	if (old->ops->open && (old->ops->open(tty) < 0)) {
+		tty_ldisc_put(old->ops);
+		/* This driver is always present */
+		if (tty_ldisc_get(N_TTY, &new_ldisc) < 0)
+			panic("n_tty: get");
+		tty_ldisc_assign(tty, &new_ldisc);
+		tty_set_termios_ldisc(tty, N_TTY);
+		if (new_ldisc.ops->open) {
+			int r = new_ldisc.ops->open(tty);
+				if (r < 0)
+				panic("Couldn't open N_TTY ldisc for "
+				      "%s --- error %d.",
+				      tty_name(tty, buf), r);
+		}
+	}
+}
+
+/**
+ *	tty_set_ldisc		-	set line discipline
+ *	@tty: the terminal to set
+ *	@ldisc: the line discipline
+ *
+ *	Set the discipline of a tty line. Must be called from a process
+ *	context.
+ *
+ *	Locking: takes tty_ldisc_lock.
+ *		 called functions take termios_mutex
+ */
+
+int tty_set_ldisc(struct tty_struct *tty, int ldisc)
+{
+	int retval;
+	struct tty_ldisc o_ldisc, new_ldisc;
+	int work;
+	unsigned long flags;
+	struct tty_struct *o_tty;
+
+restart:
+	/* This is a bit ugly for now but means we can break the 'ldisc
+	   is part of the tty struct' assumption later */
+	retval = tty_ldisc_get(ldisc, &new_ldisc);
+	if (retval)
+		return retval;
+
+	/*
+	 *	Problem: What do we do if this blocks ?
+	 */
+
+	tty_wait_until_sent(tty, 0);
+
+	if (tty->ldisc.ops->num == ldisc) {
+		tty_ldisc_put(new_ldisc.ops);
+		return 0;
+	}
+
+	/*
+	 *	No more input please, we are switching. The new ldisc
+	 *	will update this value in the ldisc open function
+	 */
+
+	tty->receive_room = 0;
+
+	o_ldisc = tty->ldisc;
+	o_tty = tty->link;
+
+	/*
+	 *	Make sure we don't change while someone holds a
+	 *	reference to the line discipline. The TTY_LDISC bit
+	 *	prevents anyone taking a reference once it is clear.
+	 *	We need the lock to avoid racing reference takers.
+	 */
+
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) {
+		if (tty->ldisc.refcount) {
+			/* Free the new ldisc we grabbed. Must drop the lock
+			   first. */
+			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+			tty_ldisc_put(o_ldisc.ops);
+			/*
+			 * There are several reasons we may be busy, including
+			 * random momentary I/O traffic. We must therefore
+			 * retry. We could distinguish between blocking ops
+			 * and retries if we made tty_ldisc_wait() smarter.
+			 * That is up for discussion.
+			 */
+			if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0)
+				return -ERESTARTSYS;
+			goto restart;
+		}
+		if (o_tty && o_tty->ldisc.refcount) {
+			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+			tty_ldisc_put(o_tty->ldisc.ops);
+			if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0)
+				return -ERESTARTSYS;
+			goto restart;
+		}
+	}
+	/*
+	 *	If the TTY_LDISC bit is set, then we are racing against
+	 *	another ldisc change
+	 */
+	if (!test_bit(TTY_LDISC, &tty->flags)) {
+		struct tty_ldisc *ld;
+		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+		tty_ldisc_put(new_ldisc.ops);
+		ld = tty_ldisc_ref_wait(tty);
+		tty_ldisc_deref(ld);
+		goto restart;
+	}
+
+	clear_bit(TTY_LDISC, &tty->flags);
+	if (o_tty)
+		clear_bit(TTY_LDISC, &o_tty->flags);
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	
+	/*
+	 *	From this point on we know nobody has an ldisc
+	 *	usage reference, nor can they obtain one until
+	 *	we say so later on.
+	 */
+
+	work = cancel_delayed_work(&tty->buf.work);
+	/*
+	 * Wait for ->hangup_work and ->buf.work handlers to terminate
+	 * MUST NOT hold locks here.
+	 */
+	flush_scheduled_work();
+	/* Shutdown the current discipline. */
+	if (o_ldisc.ops->close)
+		(o_ldisc.ops->close)(tty);
+
+	/* Now set up the new line discipline. */
+	tty_ldisc_assign(tty, &new_ldisc);
+	tty_set_termios_ldisc(tty, ldisc);
+	if (new_ldisc.ops->open)
+		retval = (new_ldisc.ops->open)(tty);
+	if (retval < 0) {
+		tty_ldisc_put(new_ldisc.ops);
+		tty_ldisc_restore(tty, &o_ldisc);
+	}
+	/* At this point we hold a reference to the new ldisc and a
+	   a reference to the old ldisc. If we ended up flipping back
+	   to the existing ldisc we have two references to it */
+
+	if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc)
+		tty->ops->set_ldisc(tty);
+
+	tty_ldisc_put(o_ldisc.ops);
+
+	/*
+	 *	Allow ldisc referencing to occur as soon as the driver
+	 *	ldisc callback completes.
+	 */
+
+	tty_ldisc_enable(tty);
+	if (o_tty)
+		tty_ldisc_enable(o_tty);
+
+	/* Restart it in case no characters kick it off. Safe if
+	   already running */
+	if (work)
+		schedule_delayed_work(&tty->buf.work, 1);
+	return retval;
+}
+
+
+/**
+ *	tty_ldisc_setup			-	open line discipline
+ *	@tty: tty being shut down
+ *	@o_tty: pair tty for pty/tty pairs
+ *
+ *	Called during the initial open of a tty/pty pair in order to set up the
+ *	line discplines and bind them to the tty.
+ */
+
+int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
+{
+	struct tty_ldisc *ld = &tty->ldisc;
+	int retval;
+
+	if (ld->ops->open) {
+		retval = (ld->ops->open)(tty);
+		if (retval)
+			return retval;
+	}
+	if (o_tty && o_tty->ldisc.ops->open) {
+		retval = (o_tty->ldisc.ops->open)(o_tty);
+		if (retval) {
+			if (ld->ops->close)
+				(ld->ops->close)(tty);
+			return retval;
+		}
+		tty_ldisc_enable(o_tty);
+	}
+	tty_ldisc_enable(tty);
+	return 0;
+}
+
+/**
+ *	tty_ldisc_release		-	release line discipline
+ *	@tty: tty being shut down
+ *	@o_tty: pair tty for pty/tty pairs
+ *
+ *	Called during the final close of a tty/pty pair in order to shut down the
+ *	line discpline layer.
+ */
+
+void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
+{
+	unsigned long flags;
+	struct tty_ldisc ld;
+	/*
+	 * Prevent flush_to_ldisc() from rescheduling the work for later.  Then
+	 * kill any delayed work. As this is the final close it does not
+	 * race with the set_ldisc code path.
+	 */
+	clear_bit(TTY_LDISC, &tty->flags);
+	cancel_delayed_work(&tty->buf.work);
+
+	/*
+	 * Wait for ->hangup_work and ->buf.work handlers to terminate
+	 */
+
+	flush_scheduled_work();
+
+	/*
+	 * Wait for any short term users (we know they are just driver
+	 * side waiters as the file is closing so user count on the file
+	 * side is zero.
+	 */
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	while (tty->ldisc.refcount) {
+		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+		wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0);
+		spin_lock_irqsave(&tty_ldisc_lock, flags);
+	}
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	/*
+	 * Shutdown the current line discipline, and reset it to N_TTY.
+	 *
+	 * FIXME: this MUST get fixed for the new reflocking
+	 */
+	if (tty->ldisc.ops->close)
+		(tty->ldisc.ops->close)(tty);
+	tty_ldisc_put(tty->ldisc.ops);
+
+	/*
+	 *	Switch the line discipline back
+	 */
+	WARN_ON(tty_ldisc_get(N_TTY, &ld));
+	tty_ldisc_assign(tty, &ld);
+	tty_set_termios_ldisc(tty, N_TTY);
+	if (o_tty) {
+		/* FIXME: could o_tty be in setldisc here ? */
+		clear_bit(TTY_LDISC, &o_tty->flags);
+		if (o_tty->ldisc.ops->close)
+			(o_tty->ldisc.ops->close)(o_tty);
+		tty_ldisc_put(o_tty->ldisc.ops);
+		WARN_ON(tty_ldisc_get(N_TTY, &ld));
+		tty_ldisc_assign(o_tty, &ld);
+		tty_set_termios_ldisc(o_tty, N_TTY);
+	}
+}
+
+/**
+ *	tty_ldisc_init		-	ldisc setup for new tty
+ *	@tty: tty being allocated
+ *
+ *	Set up the line discipline objects for a newly allocated tty. Note that
+ *	the tty structure is not completely set up when this call is made.
+ */
+
+void tty_ldisc_init(struct tty_struct *tty)
+{
+	struct tty_ldisc ld;
+	if (tty_ldisc_get(N_TTY, &ld) < 0)
+		panic("n_tty: init_tty");
+	tty_ldisc_assign(tty, &ld);
+}
+
+void tty_ldisc_begin(void)
+{
+	/* Setup the default TTY line discipline. */
+	(void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY);
+}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 4e5833073aa..e3579cb086e 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -317,8 +317,6 @@ extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
 extern int tty_check_change(struct tty_struct *tty);
 extern void stop_tty(struct tty_struct *tty);
 extern void start_tty(struct tty_struct *tty);
-extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
-extern int tty_unregister_ldisc(int disc);
 extern int tty_register_driver(struct tty_driver *driver);
 extern int tty_unregister_driver(struct tty_driver *driver);
 extern struct device *tty_register_device(struct tty_driver *driver,
@@ -383,6 +381,15 @@ extern void tty_port_init(struct tty_port *port);
 extern int tty_port_alloc_xmit_buf(struct tty_port *port);
 extern void tty_port_free_xmit_buf(struct tty_port *port);
 
+extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
+extern int tty_unregister_ldisc(int disc);
+extern int tty_set_ldisc(struct tty_struct *tty, int ldisc);
+extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty);
+extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty);
+extern void tty_ldisc_init(struct tty_struct *tty);
+extern void tty_ldisc_begin(void);
+/* This last one is just for the tty layer internals and shouldn't be used elsewhere */
+extern void tty_ldisc_enable(struct tty_struct *tty);
 
 
 /* n_tty.c */
-- 
cgit v1.2.3


From a72492bd8a8d4326fd78b2142bf7cae779d5d4c2 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:17:05 +0100
Subject: specialix: Tidy up coding style

Preparation for doing some real work on the driver. Do this first so we can
easily identify if the cleanups accidentally broke something

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/specialix.c | 663 ++++++++++++++++++++++++++---------------------
 1 file changed, 361 insertions(+), 302 deletions(-)

diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 037dc47e4cb..c390c6cc030 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -77,7 +77,7 @@
 
 #include <linux/module.h>
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/ioport.h>
@@ -92,7 +92,7 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #include "specialix_io8.h"
 #include "cd1865.h"
@@ -112,7 +112,7 @@ static int sx_debug;
 static int sx_rxfifo = SPECIALIX_RXFIFO;
 
 #ifdef DEBUG
-#define dprintk(f, str...) if (sx_debug & f) printk (str)
+#define dprintk(f, str...) if (sx_debug & f) printk(str)
 #else
 #define dprintk(f, str...) /* nothing */
 #endif
@@ -131,8 +131,8 @@ static int sx_rxfifo = SPECIALIX_RXFIFO;
 #define SX_DEBUG_FIFO    0x0800
 
 
-#define func_enter() dprintk (SX_DEBUG_FLOW, "io8: enter %s\n",__func__)
-#define func_exit()  dprintk (SX_DEBUG_FLOW, "io8: exit  %s\n", __func__)
+#define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__)
+#define func_exit()  dprintk(SX_DEBUG_FLOW, "io8: exit  %s\n", __func__)
 
 #define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
 
@@ -169,8 +169,8 @@ static int sx_poll = HZ;
 #endif
 
 
-/* Used to be outb (0xff, 0x80); */
-#define short_pause() udelay (1)
+/* Used to be outb(0xff, 0x80); */
+#define short_pause() udelay(1)
 
 
 #define SPECIALIX_LEGAL_FLAGS \
@@ -192,19 +192,19 @@ static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
 
 #ifdef SPECIALIX_TIMER
 static struct timer_list missed_irq_timer;
-static irqreturn_t sx_interrupt(int irq, void * dev_id);
+static irqreturn_t sx_interrupt(int irq, void *dev_id);
 #endif
 
 
 
-static inline int sx_paranoia_check(struct specialix_port const * port,
+static inline int sx_paranoia_check(struct specialix_port const *port,
 				    char *name, const char *routine)
 {
 #ifdef SPECIALIX_PARANOIA_CHECK
-	static const char *badmagic =
-		KERN_ERR "sx: Warning: bad specialix port magic number for device %s in %s\n";
-	static const char *badinfo =
-		KERN_ERR "sx: Warning: null specialix port for device %s in %s\n";
+	static const char *badmagic = KERN_ERR
+	  "sx: Warning: bad specialix port magic number for device %s in %s\n";
+	static const char *badinfo = KERN_ERR
+	  "sx: Warning: null specialix port for device %s in %s\n";
 
 	if (!port) {
 		printk(badinfo, name, routine);
@@ -226,66 +226,69 @@ static inline int sx_paranoia_check(struct specialix_port const * port,
  */
 
 /* Get board number from pointer */
-static inline int board_No (struct specialix_board * bp)
+static inline int board_No(struct specialix_board *bp)
 {
 	return bp - sx_board;
 }
 
 
 /* Get port number from pointer */
-static inline int port_No (struct specialix_port const * port)
+static inline int port_No(struct specialix_port const *port)
 {
 	return SX_PORT(port - sx_port);
 }
 
 
 /* Get pointer to board from pointer to port */
-static inline struct specialix_board * port_Board(struct specialix_port const * port)
+static inline struct specialix_board *port_Board(
+					struct specialix_port const *port)
 {
 	return &sx_board[SX_BOARD(port - sx_port)];
 }
 
 
 /* Input Byte from CL CD186x register */
-static inline unsigned char sx_in(struct specialix_board  * bp, unsigned short reg)
+static inline unsigned char sx_in(struct specialix_board *bp,
+							unsigned short reg)
 {
 	bp->reg = reg | 0x80;
-	outb (reg | 0x80, bp->base + SX_ADDR_REG);
-	return inb  (bp->base + SX_DATA_REG);
+	outb(reg | 0x80, bp->base + SX_ADDR_REG);
+	return inb(bp->base + SX_DATA_REG);
 }
 
 
 /* Output Byte to CL CD186x register */
-static inline void sx_out(struct specialix_board  * bp, unsigned short reg,
+static inline void sx_out(struct specialix_board *bp, unsigned short reg,
 			  unsigned char val)
 {
 	bp->reg = reg | 0x80;
-	outb (reg | 0x80, bp->base + SX_ADDR_REG);
-	outb (val, bp->base + SX_DATA_REG);
+	outb(reg | 0x80, bp->base + SX_ADDR_REG);
+	outb(val, bp->base + SX_DATA_REG);
 }
 
 
 /* Input Byte from CL CD186x register */
-static inline unsigned char sx_in_off(struct specialix_board  * bp, unsigned short reg)
+static inline unsigned char sx_in_off(struct specialix_board *bp,
+				unsigned short reg)
 {
 	bp->reg = reg;
-	outb (reg, bp->base + SX_ADDR_REG);
-	return inb  (bp->base + SX_DATA_REG);
+	outb(reg, bp->base + SX_ADDR_REG);
+	return inb(bp->base + SX_DATA_REG);
 }
 
 
 /* Output Byte to CL CD186x register */
-static inline void sx_out_off(struct specialix_board  * bp, unsigned short reg,
-			  unsigned char val)
+static inline void sx_out_off(struct specialix_board  *bp,
+				unsigned short reg, unsigned char val)
 {
 	bp->reg = reg;
-	outb (reg, bp->base + SX_ADDR_REG);
-	outb (val, bp->base + SX_DATA_REG);
+	outb(reg, bp->base + SX_ADDR_REG);
+	outb(val, bp->base + SX_DATA_REG);
 }
 
 
 /* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR(struct specialix_board  * bp)
+static inline void sx_wait_CCR(struct specialix_board  *bp)
 {
 	unsigned long delay, flags;
 	unsigned char ccr;
@@ -296,7 +299,7 @@ static inline void sx_wait_CCR(struct specialix_board  * bp)
 		spin_unlock_irqrestore(&bp->lock, flags);
 		if (!ccr)
 			return;
-		udelay (1);
+		udelay(1);
 	}
 
 	printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
@@ -304,7 +307,7 @@ static inline void sx_wait_CCR(struct specialix_board  * bp)
 
 
 /* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR_off(struct specialix_board  * bp)
+static inline void sx_wait_CCR_off(struct specialix_board  *bp)
 {
 	unsigned long delay;
 	unsigned char crr;
@@ -316,7 +319,7 @@ static inline void sx_wait_CCR_off(struct specialix_board  * bp)
 		spin_unlock_irqrestore(&bp->lock, flags);
 		if (!crr)
 			return;
-		udelay (1);
+		udelay(1);
 	}
 
 	printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
@@ -327,7 +330,7 @@ static inline void sx_wait_CCR_off(struct specialix_board  * bp)
  *  specialix IO8+ IO range functions.
  */
 
-static inline int sx_request_io_range(struct specialix_board * bp)
+static inline int sx_request_io_range(struct specialix_board *bp)
 {
 	return request_region(bp->base,
 		bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
@@ -335,15 +338,15 @@ static inline int sx_request_io_range(struct specialix_board * bp)
 }
 
 
-static inline void sx_release_io_range(struct specialix_board * bp)
+static inline void sx_release_io_range(struct specialix_board *bp)
 {
-	release_region(bp->base,
-	               bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE);
+	release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ?
+					SX_PCI_IO_SPACE : SX_IO_SPACE);
 }
 
 
 /* Set the IRQ using the RTS lines that run to the PAL on the board.... */
-static int sx_set_irq ( struct specialix_board *bp)
+static int sx_set_irq(struct specialix_board *bp)
 {
 	int virq;
 	int i;
@@ -353,15 +356,24 @@ static int sx_set_irq ( struct specialix_board *bp)
 		return 1;
 	switch (bp->irq) {
 	/* In the same order as in the docs... */
-	case 15: virq = 0;break;
-	case 12: virq = 1;break;
-	case 11: virq = 2;break;
-	case 9:  virq = 3;break;
-	default: printk (KERN_ERR "Speclialix: cannot set irq to %d.\n", bp->irq);
-	         return 0;
+	case 15:
+		virq = 0;
+		break;
+	case 12:
+		virq = 1;
+		break;
+	case 11:
+		virq = 2;
+		break;
+	case 9:
+		virq = 3;
+		break;
+	default:printk(KERN_ERR
+			    "Speclialix: cannot set irq to %d.\n", bp->irq);
+		return 0;
 	}
 	spin_lock_irqsave(&bp->lock, flags);
-	for (i=0;i<2;i++) {
+	for (i = 0; i < 2; i++) {
 		sx_out(bp, CD186x_CAR, i);
 		sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0);
 	}
@@ -371,7 +383,7 @@ static int sx_set_irq ( struct specialix_board *bp)
 
 
 /* Reset and setup CD186x chip */
-static int sx_init_CD186x(struct specialix_board  * bp)
+static int sx_init_CD186x(struct specialix_board  *bp)
 {
 	unsigned long flags;
 	int scaler;
@@ -390,7 +402,7 @@ static int sx_init_CD186x(struct specialix_board  * bp)
 	sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT);      /* Prio for transmitter intr */
 	sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT);      /* Prio for receiver intr    */
 	/* Set RegAckEn */
-	sx_out_off(bp, CD186x_SRCR, sx_in (bp, CD186x_SRCR) | SRCR_REGACKEN);
+	sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN);
 
 	/* Setting up prescaler. We need 4 ticks per 1 ms */
 	scaler =  SX_OSCFREQ/SPECIALIX_TPS;
@@ -399,9 +411,9 @@ static int sx_init_CD186x(struct specialix_board  * bp)
 	sx_out_off(bp, CD186x_PPRL, scaler & 0xff);
 	spin_unlock_irqrestore(&bp->lock, flags);
 
-	if (!sx_set_irq (bp)) {
+	if (!sx_set_irq(bp)) {
 		/* Figure out how to pass this along... */
-		printk (KERN_ERR "Cannot set irq to %d.\n", bp->irq);
+		printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq);
 		rv = 0;
 	}
 
@@ -410,16 +422,16 @@ static int sx_init_CD186x(struct specialix_board  * bp)
 }
 
 
-static int read_cross_byte (struct specialix_board *bp, int reg, int bit)
+static int read_cross_byte(struct specialix_board *bp, int reg, int bit)
 {
 	int i;
 	int t;
 	unsigned long flags;
 
 	spin_lock_irqsave(&bp->lock, flags);
-	for (i=0, t=0;i<8;i++) {
-		sx_out_off (bp, CD186x_CAR, i);
-		if (sx_in_off (bp, reg) & bit)
+	for (i = 0, t = 0; i < 8; i++) {
+		sx_out_off(bp, CD186x_CAR, i);
+		if (sx_in_off(bp, reg) & bit)
 			t |= 1 << i;
 	}
 	spin_unlock_irqrestore(&bp->lock, flags);
@@ -429,21 +441,20 @@ static int read_cross_byte (struct specialix_board *bp, int reg, int bit)
 
 
 #ifdef SPECIALIX_TIMER
-void missed_irq (unsigned long data)
+void missed_irq(unsigned long data)
 {
 	unsigned char irq;
 	unsigned long flags;
 	struct specialix_board  *bp = (struct specialix_board *)data;
 
 	spin_lock_irqsave(&bp->lock, flags);
-	irq = sx_in ((struct specialix_board *)data, CD186x_SRSR) &
-	                                            (SRSR_RREQint |
-	                                             SRSR_TREQint |
-	                                             SRSR_MREQint);
+	irq = sx_in((struct specialix_board *)data, CD186x_SRSR) &
+				(SRSR_RREQint | SRSR_TREQint | SRSR_MREQint);
 	spin_unlock_irqrestore(&bp->lock, flags);
 	if (irq) {
-		printk (KERN_INFO "Missed interrupt... Calling int from timer. \n");
-		sx_interrupt (-1, bp);
+		printk(KERN_INFO
+			"Missed interrupt... Calling int from timer. \n");
+		sx_interrupt(-1, bp);
 	}
 	mod_timer(&missed_irq_timer, jiffies + sx_poll);
 }
@@ -471,17 +482,18 @@ static int sx_probe(struct specialix_board *bp)
 
 	/* Are the I/O ports here ? */
 	sx_out_off(bp, CD186x_PPRL, 0x5a);
-	short_pause ();
+	short_pause();
 	val1 = sx_in_off(bp, CD186x_PPRL);
 
 	sx_out_off(bp, CD186x_PPRL, 0xa5);
-	short_pause ();
+	short_pause();
 	val2 = sx_in_off(bp, CD186x_PPRL);
 
 
 	if ((val1 != 0x5a) || (val2 != 0xa5)) {
-		printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
-		       board_No(bp), bp->base);
+		printk(KERN_INFO
+			"sx%d: specialix IO8+ Board at 0x%03x not found.\n",
+						board_No(bp), bp->base);
 		sx_release_io_range(bp);
 		func_exit();
 		return 1;
@@ -489,10 +501,11 @@ static int sx_probe(struct specialix_board *bp)
 
 	/* Check the DSR lines that Specialix uses as board
 	   identification */
-	val1 = read_cross_byte (bp, CD186x_MSVR, MSVR_DSR);
-	val2 = read_cross_byte (bp, CD186x_MSVR, MSVR_RTS);
-	dprintk (SX_DEBUG_INIT, "sx%d: DSR lines are: %02x, rts lines are: %02x\n",
-	        board_No(bp),  val1, val2);
+	val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR);
+	val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS);
+	dprintk(SX_DEBUG_INIT,
+			"sx%d: DSR lines are: %02x, rts lines are: %02x\n",
+					board_No(bp), val1, val2);
 
 	/* They managed to switch the bit order between the docs and
 	   the IO8+ card. The new PCI card now conforms to old docs.
@@ -500,7 +513,8 @@ static int sx_probe(struct specialix_board *bp)
 	   old card. */
 	val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2;
 	if (val1 != val2) {
-		printk(KERN_INFO "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
+		printk(KERN_INFO
+		  "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
 		       board_No(bp), val2, bp->base, val1);
 		sx_release_io_range(bp);
 		func_exit();
@@ -512,40 +526,43 @@ static int sx_probe(struct specialix_board *bp)
 	/* It's time to find IRQ for this board */
 	for (retries = 0; retries < 5 && irqs <= 0; retries++) {
 		irqs = probe_irq_on();
-		sx_init_CD186x(bp);	       		/* Reset CD186x chip       */
-		sx_out(bp, CD186x_CAR, 2);               /* Select port 2          */
+		sx_init_CD186x(bp);		   /* Reset CD186x chip      */
+		sx_out(bp, CD186x_CAR, 2);         /* Select port 2          */
 		sx_wait_CCR(bp);
-		sx_out(bp, CD186x_CCR, CCR_TXEN);        /* Enable transmitter     */
-		sx_out(bp, CD186x_IER, IER_TXRDY);       /* Enable tx empty intr   */
+		sx_out(bp, CD186x_CCR, CCR_TXEN);  /* Enable transmitter     */
+		sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr   */
 		msleep(50);
 		irqs = probe_irq_off(irqs);
 
-		dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
-		dprintk (SX_DEBUG_INIT, "TRAR = %02x, ", sx_in(bp, CD186x_TRAR));
-		dprintk (SX_DEBUG_INIT, "GIVR = %02x, ", sx_in(bp, CD186x_GIVR));
-		dprintk (SX_DEBUG_INIT, "GICR = %02x, ", sx_in(bp, CD186x_GICR));
-		dprintk (SX_DEBUG_INIT, "\n");
+		dprintk(SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
+		dprintk(SX_DEBUG_INIT, "TRAR = %02x, ", sx_in(bp, CD186x_TRAR));
+		dprintk(SX_DEBUG_INIT, "GIVR = %02x, ", sx_in(bp, CD186x_GIVR));
+		dprintk(SX_DEBUG_INIT, "GICR = %02x, ", sx_in(bp, CD186x_GICR));
+		dprintk(SX_DEBUG_INIT, "\n");
 
 		/* Reset CD186x again      */
 		if (!sx_init_CD186x(bp)) {
 			/* Hmmm. This is dead code anyway. */
 		}
 
-		dprintk (SX_DEBUG_INIT "val1 = %02x, val2 = %02x, val3 = %02x.\n",
-		        val1, val2, val3);
+		dprintk(SX_DEBUG_INIT
+			"val1 = %02x, val2 = %02x, val3 = %02x.\n",
+				val1, val2, val3);
 
 	}
 
 #if 0
 	if (irqs <= 0) {
-		printk(KERN_ERR "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n",
-		       board_No(bp), bp->base);
+		printk(KERN_ERR
+		  "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n",
+						board_No(bp), bp->base);
 		sx_release_io_range(bp);
 		func_exit();
 		return 1;
 	}
 #endif
-	printk (KERN_INFO "Started with irq=%d, but now have irq=%d.\n", bp->irq, irqs);
+	printk(KERN_INFO "Started with irq=%d, but now have irq=%d.\n",
+								bp->irq, irqs);
 	if (irqs > 0)
 		bp->irq = irqs;
 #endif
@@ -560,7 +577,7 @@ static int sx_probe(struct specialix_board *bp)
 	bp->flags |= SX_BOARD_PRESENT;
 
 	/* Chip           revcode   pkgtype
-	                  GFRCR     SRCR bit 7
+			  GFRCR     SRCR bit 7
 	   CD180 rev B    0x81      0
 	   CD180 rev C    0x82      0
 	   CD1864 rev A   0x82      1
@@ -570,24 +587,37 @@ static int sx_probe(struct specialix_board *bp)
 	 */
 
 	switch (sx_in_off(bp, CD186x_GFRCR)) {
-	case 0x82:chip = 1864;rev='A';break;
-	case 0x83:chip = 1865;rev='A';break;
-	case 0x84:chip = 1865;rev='B';break;
-	case 0x85:chip = 1865;rev='C';break; /* Does not exist at this time */
-	default:chip=-1;rev='x';
+	case 0x82:
+		chip = 1864;
+		rev = 'A';
+		break;
+	case 0x83:
+		chip = 1865;
+		rev = 'A';
+		break;
+	case 0x84:
+		chip = 1865;
+		rev = 'B';
+		break;
+	case 0x85:
+		chip = 1865;
+		rev = 'C';
+		break; /* Does not exist at this time */
+	default:
+		chip = -1;
+		rev = 'x';
 	}
 
-	dprintk (SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR) );
+	dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR));
 
 #ifdef SPECIALIX_TIMER
 	setup_timer(&missed_irq_timer, missed_irq, (unsigned long)bp);
 	mod_timer(&missed_irq_timer, jiffies + sx_poll);
 #endif
 
-	printk(KERN_INFO"sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
-	       board_No(bp),
-	       bp->base, bp->irq,
-	       chip, rev);
+	printk(KERN_INFO
+    "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
+				board_No(bp), bp->base, bp->irq, chip, rev);
 
 	func_exit();
 	return 0;
@@ -598,20 +628,22 @@ static int sx_probe(struct specialix_board *bp)
  *  Interrupt processing routines.
  * */
 
-static inline struct specialix_port * sx_get_port(struct specialix_board * bp,
-					       unsigned char const * what)
+static inline struct specialix_port *sx_get_port(struct specialix_board *bp,
+					       unsigned char const *what)
 {
 	unsigned char channel;
-	struct specialix_port * port = NULL;
+	struct specialix_port *port = NULL;
 
 	channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF;
-	dprintk (SX_DEBUG_CHAN, "channel: %d\n", channel);
+	dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel);
 	if (channel < CD186x_NCH) {
 		port = &sx_port[board_No(bp) * SX_NPORT + channel];
-		dprintk (SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n",board_No(bp) * SX_NPORT + channel,  port, port->port.flags & ASYNC_INITIALIZED);
+		dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n",
+			board_No(bp) * SX_NPORT + channel,  port,
+			port->port.flags & ASYNC_INITIALIZED);
 
 		if (port->port.flags & ASYNC_INITIALIZED) {
-			dprintk (SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
+			dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
 			func_exit();
 			return port;
 		}
@@ -622,7 +654,7 @@ static inline struct specialix_port * sx_get_port(struct specialix_board * bp,
 }
 
 
-static inline void sx_receive_exc(struct specialix_board * bp)
+static inline void sx_receive_exc(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -633,7 +665,7 @@ static inline void sx_receive_exc(struct specialix_board * bp)
 
 	port = sx_get_port(bp, "Receive");
 	if (!port) {
-		dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
+		dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
 		func_exit();
 		return;
 	}
@@ -641,19 +673,21 @@ static inline void sx_receive_exc(struct specialix_board * bp)
 
 	status = sx_in(bp, CD186x_RCSR);
 
-	dprintk (SX_DEBUG_RX, "status: 0x%x\n", status);
+	dprintk(SX_DEBUG_RX, "status: 0x%x\n", status);
 	if (status & RCSR_OE) {
 		port->overrun++;
-		dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Overrun. Total %ld overruns.\n",
-		       board_No(bp), port_No(port), port->overrun);
+		dprintk(SX_DEBUG_FIFO,
+			"sx%d: port %d: Overrun. Total %ld overruns.\n",
+				board_No(bp), port_No(port), port->overrun);
 	}
 	status &= port->mark_mask;
 
 	/* This flip buffer check needs to be below the reading of the
 	   status register to reset the chip's IRQ.... */
 	if (tty_buffer_request_room(tty, 1) == 0) {
-		dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Working around flip buffer overflow.\n",
-		       board_No(bp), port_No(port));
+		dprintk(SX_DEBUG_FIFO,
+		    "sx%d: port %d: Working around flip buffer overflow.\n",
+					board_No(bp), port_No(port));
 		func_exit();
 		return;
 	}
@@ -664,8 +698,9 @@ static inline void sx_receive_exc(struct specialix_board * bp)
 		return;
 	}
 	if (status & RCSR_TOUT) {
-		printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
-		       board_No(bp), port_No(port));
+		printk(KERN_INFO
+		    "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
+					board_No(bp), port_No(port));
 		func_exit();
 		return;
 
@@ -688,13 +723,13 @@ static inline void sx_receive_exc(struct specialix_board * bp)
 	else
 		flag = TTY_NORMAL;
 
-	if(tty_insert_flip_char(tty, ch, flag))
+	if (tty_insert_flip_char(tty, ch, flag))
 		tty_flip_buffer_push(tty);
 	func_exit();
 }
 
 
-static inline void sx_receive(struct specialix_board * bp)
+static inline void sx_receive(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -702,15 +737,16 @@ static inline void sx_receive(struct specialix_board * bp)
 
 	func_enter();
 
-	if (!(port = sx_get_port(bp, "Receive"))) {
-		dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
+	port = sx_get_port(bp, "Receive");
+	if (port == NULL) {
+		dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
 		func_exit();
 		return;
 	}
 	tty = port->port.tty;
 
 	count = sx_in(bp, CD186x_RDCR);
-	dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
+	dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
 	port->hits[count > 8 ? 9 : count]++;
 
 	tty_buffer_request_room(tty, count);
@@ -722,18 +758,19 @@ static inline void sx_receive(struct specialix_board * bp)
 }
 
 
-static inline void sx_transmit(struct specialix_board * bp)
+static inline void sx_transmit(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
 	unsigned char count;
 
 	func_enter();
-	if (!(port = sx_get_port(bp, "Transmit"))) {
+	port = sx_get_port(bp, "Transmit");
+	if (port == NULL) {
 		func_exit();
 		return;
 	}
-	dprintk (SX_DEBUG_TX, "port: %p\n", port);
+	dprintk(SX_DEBUG_TX, "port: %p\n", port);
 	tty = port->port.tty;
 
 	if (port->IER & IER_TXEMPTY) {
@@ -765,7 +802,8 @@ static inline void sx_transmit(struct specialix_board * bp)
 			sx_out(bp, CD186x_TDR, CD186x_C_ESC);
 			sx_out(bp, CD186x_TDR, CD186x_C_DELAY);
 			sx_out(bp, CD186x_TDR, count);
-			if (!(port->break_length -= count))
+			port->break_length -= count;
+			if (port->break_length == 0)
 				port->break_length--;
 		} else {
 			sx_out(bp, CD186x_TDR, CD186x_C_ESC);
@@ -794,36 +832,37 @@ static inline void sx_transmit(struct specialix_board * bp)
 		sx_out(bp, CD186x_IER, port->IER);
 	}
 	if (port->xmit_cnt <= port->wakeup_chars)
- 		tty_wakeup(tty);
+		tty_wakeup(tty);
 
 	func_exit();
 }
 
 
-static inline void sx_check_modem(struct specialix_board * bp)
+static inline void sx_check_modem(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
 	unsigned char mcr;
 	int msvr_cd;
 
-	dprintk (SX_DEBUG_SIGNALS, "Modem intr. ");
-	if (!(port = sx_get_port(bp, "Modem")))
+	dprintk(SX_DEBUG_SIGNALS, "Modem intr. ");
+	port = sx_get_port(bp, "Modem");
+	if (port == NULL)
 		return;
 
 	tty = port->port.tty;
 
 	mcr = sx_in(bp, CD186x_MCR);
-	printk ("mcr = %02x.\n", mcr);
+	printk("mcr = %02x.\n", mcr);	/* FIXME */
 
 	if ((mcr & MCR_CDCHG)) {
-		dprintk (SX_DEBUG_SIGNALS, "CD just changed... ");
+		dprintk(SX_DEBUG_SIGNALS, "CD just changed... ");
 		msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD;
 		if (msvr_cd) {
-			dprintk (SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
+			dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
 			wake_up_interruptible(&port->port.open_wait);
 		} else {
-			dprintk (SX_DEBUG_SIGNALS, "Sending HUP.\n");
+			dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n");
 			tty_hangup(tty);
 		}
 	}
@@ -874,9 +913,12 @@ static irqreturn_t sx_interrupt(int dummy, void *dev_id)
 
 	spin_lock_irqsave(&bp->lock, flags);
 
-	dprintk (SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
+	dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__,
+		port_No(sx_get_port(bp, "INT")),
+		SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
 	if (!(bp->flags & SX_BOARD_ACTIVE)) {
-		dprintk (SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", bp->irq);
+		dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n",
+								bp->irq);
 		spin_unlock_irqrestore(&bp->lock, flags);
 		func_exit();
 		return IRQ_NONE;
@@ -884,10 +926,11 @@ static irqreturn_t sx_interrupt(int dummy, void *dev_id)
 
 	saved_reg = bp->reg;
 
-	while ((++loop < 16) && (status = (sx_in(bp, CD186x_SRSR) &
-	                                   (SRSR_RREQint |
-		                            SRSR_TREQint |
-	                                    SRSR_MREQint)))) {
+	while (++loop < 16) {
+		status = sx_in(bp, CD186x_SRSR) &
+				(SRSR_RREQint | SRSR_TREQint | SRSR_MREQint);
+		if (status == 0)
+			break;
 		if (status & SRSR_RREQint) {
 			ack = sx_in(bp, CD186x_RRAR);
 
@@ -896,8 +939,9 @@ static irqreturn_t sx_interrupt(int dummy, void *dev_id)
 			else if (ack == (SX_ID | GIVR_IT_REXC))
 				sx_receive_exc(bp);
 			else
-				printk(KERN_ERR "sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
-				       board_No(bp), status, ack);
+				printk(KERN_ERR
+				"sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
+						board_No(bp), status, ack);
 
 		} else if (status & SRSR_TREQint) {
 			ack = sx_in(bp, CD186x_TRAR);
@@ -906,14 +950,16 @@ static irqreturn_t sx_interrupt(int dummy, void *dev_id)
 				sx_transmit(bp);
 			else
 				printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n",
-				       board_No(bp), status, ack, port_No (sx_get_port (bp, "Int")));
+					board_No(bp), status, ack,
+					port_No(sx_get_port(bp, "Int")));
 		} else if (status & SRSR_MREQint) {
 			ack = sx_in(bp, CD186x_MRAR);
 
 			if (ack == (SX_ID | GIVR_IT_MODEM))
 				sx_check_modem(bp);
 			else
-				printk(KERN_ERR "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
+				printk(KERN_ERR
+				  "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
 				       board_No(bp), status, ack);
 
 		}
@@ -921,7 +967,7 @@ static irqreturn_t sx_interrupt(int dummy, void *dev_id)
 		sx_out(bp, CD186x_EOIR, 0);   /* Mark end of interrupt */
 	}
 	bp->reg = saved_reg;
-	outb (bp->reg, bp->base + SX_ADDR_REG);
+	outb(bp->reg, bp->base + SX_ADDR_REG);
 	spin_unlock_irqrestore(&bp->lock, flags);
 	func_exit();
 	return IRQ_HANDLED;
@@ -932,7 +978,7 @@ static irqreturn_t sx_interrupt(int dummy, void *dev_id)
  *  Routines for open & close processing.
  */
 
-static void turn_ints_off (struct specialix_board *bp)
+static void turn_ints_off(struct specialix_board *bp)
 {
 	unsigned long flags;
 
@@ -945,13 +991,13 @@ static void turn_ints_off (struct specialix_board *bp)
 	}
 
 	spin_lock_irqsave(&bp->lock, flags);
-	(void) sx_in_off (bp, 0); /* Turn off interrupts. */
+	(void) sx_in_off(bp, 0); /* Turn off interrupts. */
 	spin_unlock_irqrestore(&bp->lock, flags);
 
 	func_exit();
 }
 
-static void turn_ints_on (struct specialix_board *bp)
+static void turn_ints_on(struct specialix_board *bp)
 {
 	unsigned long flags;
 
@@ -961,7 +1007,7 @@ static void turn_ints_on (struct specialix_board *bp)
 		/* play with the PCI chip. See comment above. */
 	}
 	spin_lock_irqsave(&bp->lock, flags);
-	(void) sx_in (bp, 0); /* Turn ON interrupts. */
+	(void) sx_in(bp, 0); /* Turn ON interrupts. */
 	spin_unlock_irqrestore(&bp->lock, flags);
 
 	func_exit();
@@ -969,7 +1015,7 @@ static void turn_ints_on (struct specialix_board *bp)
 
 
 /* Called with disabled interrupts */
-static inline int sx_setup_board(struct specialix_board * bp)
+static inline int sx_setup_board(struct specialix_board *bp)
 {
 	int error;
 
@@ -977,14 +1023,16 @@ static inline int sx_setup_board(struct specialix_board * bp)
 		return 0;
 
 	if (bp->flags & SX_BOARD_IS_PCI)
-		error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
+		error = request_irq(bp->irq, sx_interrupt,
+			IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
 	else
-		error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED, "specialix IO8+", bp);
+		error = request_irq(bp->irq, sx_interrupt,
+			IRQF_DISABLED, "specialix IO8+", bp);
 
 	if (error)
 		return error;
 
-	turn_ints_on (bp);
+	turn_ints_on(bp);
 	bp->flags |= SX_BOARD_ACTIVE;
 
 	return 0;
@@ -1003,13 +1051,10 @@ static inline void sx_shutdown_board(struct specialix_board *bp)
 
 	bp->flags &= ~SX_BOARD_ACTIVE;
 
-	dprintk (SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
-		 bp->irq, board_No (bp));
+	dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
+		 bp->irq, board_No(bp));
 	free_irq(bp->irq, bp);
-
-	turn_ints_off (bp);
-
-
+	turn_ints_off(bp);
 	func_exit();
 }
 
@@ -1018,7 +1063,8 @@ static inline void sx_shutdown_board(struct specialix_board *bp)
  * Setting up port characteristics.
  * Must be called with disabled interrupts
  */
-static void sx_change_speed(struct specialix_board *bp, struct specialix_port *port)
+static void sx_change_speed(struct specialix_board *bp,
+						struct specialix_port *port)
 {
 	struct tty_struct *tty;
 	unsigned long baud;
@@ -1030,7 +1076,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 
 	func_enter();
 
-	if (!(tty = port->port.tty) || !tty->termios) {
+	tty = port->port.tty;
+	if (!tty || !tty->termios) {
 		func_exit();
 		return;
 	}
@@ -1048,7 +1095,7 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 	else
 		port->MSVR =  (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
 	spin_unlock_irqrestore(&bp->lock, flags);
-	dprintk (SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
+	dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
 	baud = tty_get_baud_rate(tty);
 
 	if (baud == 38400) {
@@ -1060,21 +1107,19 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 
 	if (!baud) {
 		/* Drop DTR & exit */
-		dprintk (SX_DEBUG_TERMIOS, "Dropping DTR...  Hmm....\n");
-		if (!SX_CRTSCTS (tty)) {
-			port -> MSVR &= ~ MSVR_DTR;
+		dprintk(SX_DEBUG_TERMIOS, "Dropping DTR...  Hmm....\n");
+		if (!SX_CRTSCTS(tty)) {
+			port->MSVR &= ~MSVR_DTR;
 			spin_lock_irqsave(&bp->lock, flags);
-			sx_out(bp, CD186x_MSVR, port->MSVR );
+			sx_out(bp, CD186x_MSVR, port->MSVR);
 			spin_unlock_irqrestore(&bp->lock, flags);
-		}
-		else
-			dprintk (SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
+		} else
+			dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
 		return;
 	} else {
 		/* Set DTR on */
-		if (!SX_CRTSCTS (tty)) {
-			port ->MSVR |= MSVR_DTR;
-		}
+		if (!SX_CRTSCTS(tty))
+			port->MSVR |= MSVR_DTR;
 	}
 
 	/*
@@ -1083,28 +1128,27 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 
 	/* Set baud rate for port */
 	tmp = port->custom_divisor ;
-	if ( tmp )
-		printk (KERN_INFO "sx%d: Using custom baud rate divisor %ld. \n"
-		                  "This is an untested option, please be carefull.\n",
-		                  port_No (port), tmp);
+	if (tmp)
+		printk(KERN_INFO
+			"sx%d: Using custom baud rate divisor %ld. \n"
+			"This is an untested option, please be careful.\n",
+							port_No(port), tmp);
 	else
-		tmp = (((SX_OSCFREQ + baud/2) / baud +
-		         CD186x_TPC/2) / CD186x_TPC);
+		tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) /
+								CD186x_TPC);
 
-	if ((tmp < 0x10) && time_before(again, jiffies)) {
+	if (tmp < 0x10 && time_before(again, jiffies)) {
 		again = jiffies + HZ * 60;
 		/* Page 48 of version 2.0 of the CL-CD1865 databook */
 		if (tmp >= 12) {
-			printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
-			        "Performance degradation is possible.\n"
-			        "Read specialix.txt for more info.\n",
-			        port_No (port), tmp);
+			printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
+				"Performance degradation is possible.\n"
+				"Read specialix.txt for more info.\n",
+						port_No(port), tmp);
 		} else {
-			printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
-			        "Warning: overstressing Cirrus chip. "
-			        "This might not work.\n"
-			        "Read specialix.txt for more info.\n",
-			        port_No (port), tmp);
+			printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
+		"Warning: overstressing Cirrus chip. This might not work.\n"
+		"Read specialix.txt for more info.\n", port_No(port), tmp);
 		}
 	}
 	spin_lock_irqsave(&bp->lock, flags);
@@ -1114,7 +1158,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 	sx_out(bp, CD186x_TBPRL, tmp & 0xff);
 	spin_unlock_irqrestore(&bp->lock, flags);
 	if (port->custom_divisor)
-		baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor;
+		baud = (SX_OSCFREQ + port->custom_divisor/2) /
+							port->custom_divisor;
 	baud = (baud + 5) / 10;		/* Estimated CPS */
 
 	/* Two timer ticks seems enough to wakeup something like SLIP driver */
@@ -1129,16 +1174,16 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 	sx_out(bp, CD186x_RTPR, tmp);
 	spin_unlock_irqrestore(&bp->lock, flags);
 	switch (C_CSIZE(tty)) {
-	 case CS5:
+	case CS5:
 		cor1 |= COR1_5BITS;
 		break;
-	 case CS6:
+	case CS6:
 		cor1 |= COR1_6BITS;
 		break;
-	 case CS7:
+	case CS7:
 		cor1 |= COR1_7BITS;
 		break;
-	 case CS8:
+	case CS8:
 		cor1 |= COR1_8BITS;
 		break;
 	}
@@ -1175,7 +1220,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 		mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
 		mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
 		spin_lock_irqsave(&bp->lock, flags);
-		tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & (MSVR_CTS|MSVR_DSR));
+		tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) &
+							(MSVR_CTS|MSVR_DSR));
 		spin_unlock_irqrestore(&bp->lock, flags);
 #else
 		port->COR2 |= COR2_CTSAE;
@@ -1219,7 +1265,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
 	/* Setting up modem option registers */
-	dprintk (SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", mcor1, mcor2);
+	dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n",
+								mcor1, mcor2);
 	sx_out(bp, CD186x_MCOR1, mcor1);
 	sx_out(bp, CD186x_MCOR2, mcor2);
 	spin_unlock_irqrestore(&bp->lock, flags);
@@ -1238,7 +1285,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
 
 
 /* Must be called with interrupts enabled */
-static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port)
+static int sx_setup_port(struct specialix_board *bp,
+						struct specialix_port *port)
 {
 	unsigned long flags;
 
@@ -1253,7 +1301,8 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port
 		/* We may sleep in get_zeroed_page() */
 		unsigned long tmp;
 
-		if (!(tmp = get_zeroed_page(GFP_KERNEL))) {
+		tmp = get_zeroed_page(GFP_KERNEL);
+		if (tmp == 0L) {
 			func_exit();
 			return -ENOMEM;
 		}
@@ -1284,7 +1333,8 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port
 
 
 /* Must be called with interrupts disabled */
-static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *port)
+static void sx_shutdown_port(struct specialix_board *bp,
+						struct specialix_port *port)
 {
 	struct tty_struct *tty;
 	int i;
@@ -1298,11 +1348,11 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *
 	}
 
 	if (sx_debug & SX_DEBUG_FIFO) {
-		dprintk(SX_DEBUG_FIFO, "sx%d: port %d: %ld overruns, FIFO hits [ ",
-			board_No(bp), port_No(port), port->overrun);
-		for (i = 0; i < 10; i++) {
+		dprintk(SX_DEBUG_FIFO,
+			"sx%d: port %d: %ld overruns, FIFO hits [ ",
+				board_No(bp), port_No(port), port->overrun);
+		for (i = 0; i < 10; i++)
 			dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]);
-		}
 		dprintk(SX_DEBUG_FIFO, "].\n");
 	}
 
@@ -1315,7 +1365,8 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CAR, port_No(port));
 
-	if (!(tty = port->port.tty) || C_HUPCL(tty)) {
+	tty = port->port.tty;
+	if (tty == NULL || C_HUPCL(tty)) {
 		/* Drop DTR */
 		sx_out(bp, CD186x_MSVDTR, 0);
 	}
@@ -1338,8 +1389,8 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *
 }
 
 
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-                           struct specialix_port *port)
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+						struct specialix_port *port)
 {
 	DECLARE_WAITQUEUE(wait,  current);
 	struct specialix_board *bp = port_Board(port);
@@ -1389,23 +1440,22 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	retval = 0;
 	add_wait_queue(&port->port.open_wait, &wait);
 	spin_lock_irqsave(&port->lock, flags);
-	if (!tty_hung_up_p(filp)) {
+	if (!tty_hung_up_p(filp))
 		port->port.count--;
-	}
 	spin_unlock_irqrestore(&port->lock, flags);
 	port->port.blocked_open++;
 	while (1) {
 		spin_lock_irqsave(&bp->lock, flags);
 		sx_out(bp, CD186x_CAR, port_No(port));
 		CD = sx_in(bp, CD186x_MSVR) & MSVR_CD;
-		if (SX_CRTSCTS (tty)) {
+		if (SX_CRTSCTS(tty)) {
 			/* Activate RTS */
 			port->MSVR |= MSVR_DTR;		/* WTF? */
-			sx_out (bp, CD186x_MSVR, port->MSVR);
+			sx_out(bp, CD186x_MSVR, port->MSVR);
 		} else {
 			/* Activate DTR */
 			port->MSVR |= MSVR_DTR;
-			sx_out (bp, CD186x_MSVR, port->MSVR);
+			sx_out(bp, CD186x_MSVR, port->MSVR);
 		}
 		spin_unlock_irqrestore(&bp->lock, flags);
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -1430,9 +1480,8 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&port->port.open_wait, &wait);
 	spin_lock_irqsave(&port->lock, flags);
-	if (!tty_hung_up_p(filp)) {
+	if (!tty_hung_up_p(filp))
 		port->port.count++;
-	}
 	port->port.blocked_open--;
 	spin_unlock_irqrestore(&port->lock, flags);
 	if (retval) {
@@ -1446,12 +1495,12 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 }
 
 
-static int sx_open(struct tty_struct * tty, struct file * filp)
+static int sx_open(struct tty_struct *tty, struct file *filp)
 {
 	int board;
 	int error;
-	struct specialix_port * port;
-	struct specialix_board * bp;
+	struct specialix_port *port;
+	struct specialix_board *bp;
 	int i;
 	unsigned long flags;
 
@@ -1468,17 +1517,19 @@ static int sx_open(struct tty_struct * tty, struct file * filp)
 	port = sx_port + board * SX_NPORT + SX_PORT(tty->index);
 	port->overrun = 0;
 	for (i = 0; i < 10; i++)
-		port->hits[i]=0;
+		port->hits[i] = 0;
 
-	dprintk (SX_DEBUG_OPEN, "Board = %d, bp = %p, port = %p, portno = %d.\n",
-	        board, bp, port, SX_PORT(tty->index));
+	dprintk(SX_DEBUG_OPEN,
+			"Board = %d, bp = %p, port = %p, portno = %d.\n",
+				 board, bp, port, SX_PORT(tty->index));
 
 	if (sx_paranoia_check(port, tty->name, "sx_open")) {
 		func_enter();
 		return -ENODEV;
 	}
 
-	if ((error = sx_setup_board(bp))) {
+	error = sx_setup_board(bp);
+	if (error) {
 		func_exit();
 		return error;
 	}
@@ -1490,12 +1541,14 @@ static int sx_open(struct tty_struct * tty, struct file * filp)
 	port->port.tty = tty;
 	spin_unlock_irqrestore(&bp->lock, flags);
 
-	if ((error = sx_setup_port(bp, port))) {
+	error = sx_setup_port(bp, port);
+	if (error) {
 		func_enter();
 		return error;
 	}
 
-	if ((error = block_til_ready(tty, filp, port))) {
+	error = block_til_ready(tty, filp, port);
+	if (error) {
 		func_enter();
 		return error;
 	}
@@ -1508,7 +1561,7 @@ static void sx_flush_buffer(struct tty_struct *tty)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	unsigned long flags;
-	struct specialix_board  * bp;
+	struct specialix_board  *bp;
 
 	func_enter();
 
@@ -1526,9 +1579,9 @@ static void sx_flush_buffer(struct tty_struct *tty)
 	func_exit();
 }
 
-static void sx_close(struct tty_struct * tty, struct file * filp)
+static void sx_close(struct tty_struct *tty, struct file *filp)
 {
-	struct specialix_port *port = (struct specialix_port *) tty->driver_data;
+	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	struct specialix_board *bp;
 	unsigned long flags;
 	unsigned long timeout;
@@ -1570,17 +1623,16 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
 	 */
 	tty->closing = 1;
 	spin_unlock_irqrestore(&port->lock, flags);
-	dprintk (SX_DEBUG_OPEN, "Closing\n");
-	if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+	dprintk(SX_DEBUG_OPEN, "Closing\n");
+	if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
 		tty_wait_until_sent(tty, port->port.closing_wait);
-	}
 	/*
 	 * At this point we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts, and tell the
 	 * interrupt driver to stop checking the data ready bit in the
 	 * line status register.
 	 */
-	dprintk (SX_DEBUG_OPEN, "Closed\n");
+	dprintk(SX_DEBUG_OPEN, "Closed\n");
 	port->IER &= ~IER_RXD;
 	if (port->port.flags & ASYNC_INITIALIZED) {
 		port->IER &= ~IER_TXRDY;
@@ -1595,11 +1647,11 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
 		 * important if there is a transmit FIFO!
 		 */
 		timeout = jiffies+HZ;
-		while(port->IER & IER_TXEMPTY) {
-			set_current_state (TASK_INTERRUPTIBLE);
+		while (port->IER & IER_TXEMPTY) {
+			set_current_state(TASK_INTERRUPTIBLE);
 			msleep_interruptible(jiffies_to_msecs(port->timeout));
 			if (time_after(jiffies, timeout)) {
-				printk (KERN_INFO "Timeout waiting for close\n");
+				printk(KERN_INFO "Timeout waiting for close\n");
 				break;
 			}
 		}
@@ -1607,13 +1659,15 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
 	}
 
 	if (--bp->count < 0) {
-		printk(KERN_ERR "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
-		       board_No(bp), bp->count, tty->index);
+		printk(KERN_ERR
+		    "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
+				board_No(bp), bp->count, tty->index);
 		bp->count = 0;
 	}
 	if (--port->port.count < 0) {
-		printk(KERN_ERR "sx%d: sx_close: bad port count for tty%d: %d\n",
-		       board_No(bp), port_No(port), port->port.count);
+		printk(KERN_ERR
+			"sx%d: sx_close: bad port count for tty%d: %d\n",
+				board_No(bp), port_No(port), port->port.count);
 		port->port.count = 0;
 	}
 
@@ -1625,9 +1679,9 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
 	port->port.tty = NULL;
 	spin_unlock_irqrestore(&port->lock, flags);
 	if (port->port.blocked_open) {
-		if (port->port.close_delay) {
-			msleep_interruptible(jiffies_to_msecs(port->port.close_delay));
-		}
+		if (port->port.close_delay)
+			msleep_interruptible(
+				jiffies_to_msecs(port->port.close_delay));
 		wake_up_interruptible(&port->port.open_wait);
 	}
 	port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
@@ -1637,8 +1691,8 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
 }
 
 
-static int sx_write(struct tty_struct * tty,
-                    const unsigned char *buf, int count)
+static int sx_write(struct tty_struct *tty,
+					const unsigned char *buf, int count)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	struct specialix_board *bp;
@@ -1690,11 +1744,11 @@ static int sx_write(struct tty_struct * tty,
 }
 
 
-static int sx_put_char(struct tty_struct * tty, unsigned char ch)
+static int sx_put_char(struct tty_struct *tty, unsigned char ch)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	unsigned long flags;
-	struct specialix_board  * bp;
+	struct specialix_board  *bp;
 
 	func_enter();
 
@@ -1702,7 +1756,7 @@ static int sx_put_char(struct tty_struct * tty, unsigned char ch)
 		func_exit();
 		return 0;
 	}
-	dprintk (SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
+	dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
 	if (!port->xmit_buf) {
 		func_exit();
 		return 0;
@@ -1710,14 +1764,15 @@ static int sx_put_char(struct tty_struct * tty, unsigned char ch)
 	bp = port_Board(port);
 	spin_lock_irqsave(&port->lock, flags);
 
-	dprintk (SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", port->xmit_cnt, port->xmit_buf);
-	if ((port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) || (!port->xmit_buf)) {
+	dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n",
+					port->xmit_cnt, port->xmit_buf);
+	if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) {
 		spin_unlock_irqrestore(&port->lock, flags);
-		dprintk (SX_DEBUG_TX, "Exit size\n");
+		dprintk(SX_DEBUG_TX, "Exit size\n");
 		func_exit();
 		return 0;
 	}
-	dprintk (SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
+	dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
 	port->xmit_buf[port->xmit_head++] = ch;
 	port->xmit_head &= SERIAL_XMIT_SIZE - 1;
 	port->xmit_cnt++;
@@ -1728,11 +1783,11 @@ static int sx_put_char(struct tty_struct * tty, unsigned char ch)
 }
 
 
-static void sx_flush_chars(struct tty_struct * tty)
+static void sx_flush_chars(struct tty_struct *tty)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	unsigned long flags;
-	struct specialix_board  * bp = port_Board(port);
+	struct specialix_board  *bp = port_Board(port);
 
 	func_enter();
 
@@ -1755,7 +1810,7 @@ static void sx_flush_chars(struct tty_struct * tty)
 }
 
 
-static int sx_write_room(struct tty_struct * tty)
+static int sx_write_room(struct tty_struct *tty)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	int	ret;
@@ -1790,12 +1845,10 @@ static int sx_chars_in_buffer(struct tty_struct *tty)
 	return port->xmit_cnt;
 }
 
-
-
 static int sx_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
-	struct specialix_board * bp;
+	struct specialix_board *bp;
 	unsigned char status;
 	unsigned int result;
 	unsigned long flags;
@@ -1808,25 +1861,25 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file)
 	}
 
 	bp = port_Board(port);
-	spin_lock_irqsave (&bp->lock, flags);
+	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	status = sx_in(bp, CD186x_MSVR);
 	spin_unlock_irqrestore(&bp->lock, flags);
-	dprintk (SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
-		port_No(port), status, sx_in (bp, CD186x_CAR));
-	dprintk (SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
+	dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
+			port_No(port), status, sx_in(bp, CD186x_CAR));
+	dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
 	if (SX_CRTSCTS(port->port.tty)) {
 		result  = /*   (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
-		          |   ((status & MSVR_DTR) ? TIOCM_RTS : 0)
-		          |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-		          |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
-		          |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
+			  |   ((status & MSVR_DTR) ? TIOCM_RTS : 0)
+			  |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
+			  |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
+			  |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
 	} else {
 		result  = /*   (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */
-		          |   ((status & MSVR_DTR) ? TIOCM_DTR : 0)
-		          |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-		          |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
-		          |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
+			  |   ((status & MSVR_DTR) ? TIOCM_DTR : 0)
+			  |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
+			  |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
+			  |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
 	}
 
 	func_exit();
@@ -1886,14 +1939,15 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 
-static inline void sx_send_break(struct specialix_port * port, unsigned long length)
+static inline void sx_send_break(struct specialix_port *port,
+						unsigned long length)
 {
 	struct specialix_board *bp = port_Board(port);
 	unsigned long flags;
 
 	func_enter();
 
-	spin_lock_irqsave (&port->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
 	port->break_length = SPECIALIX_TPS / HZ * length;
 	port->COR2 |= COR2_ETC;
 	port->IER  |= IER_TXRDY;
@@ -1902,7 +1956,7 @@ static inline void sx_send_break(struct specialix_port * port, unsigned long len
 	sx_out(bp, CD186x_COR2, port->COR2);
 	sx_out(bp, CD186x_IER, port->IER);
 	spin_unlock_irqrestore(&bp->lock, flags);
-	spin_unlock_irqrestore (&port->lock, flags);
+	spin_unlock_irqrestore(&port->lock, flags);
 	sx_wait_CCR(bp);
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CCR, CCR_CORCHG2);
@@ -1913,8 +1967,8 @@ static inline void sx_send_break(struct specialix_port * port, unsigned long len
 }
 
 
-static inline int sx_set_serial_info(struct specialix_port * port,
-                                     struct serial_struct __user * newinfo)
+static inline int sx_set_serial_info(struct specialix_port *port,
+					struct serial_struct __user *newinfo)
 {
 	struct serial_struct tmp;
 	struct specialix_board *bp = port_Board(port);
@@ -1943,25 +1997,25 @@ static inline int sx_set_serial_info(struct specialix_port * port,
 			return -EPERM;
 		}
 		port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
-		                  (tmp.flags & ASYNC_USR_MASK));
+						(tmp.flags & ASYNC_USR_MASK));
 		port->custom_divisor = tmp.custom_divisor;
 	} else {
 		port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
-		                  (tmp.flags & ASYNC_FLAGS));
+						(tmp.flags & ASYNC_FLAGS));
 		port->port.close_delay = tmp.close_delay;
 		port->port.closing_wait = tmp.closing_wait;
 		port->custom_divisor = tmp.custom_divisor;
 	}
-	if (change_speed) {
+	if (change_speed)
 		sx_change_speed(bp, port);
-	}
+
 	func_exit();
 	unlock_kernel();
 	return 0;
 }
 
 
-static inline int sx_get_serial_info(struct specialix_port * port,
+static inline int sx_get_serial_info(struct specialix_port *port,
 				     struct serial_struct __user *retinfo)
 {
 	struct serial_struct tmp;
@@ -1992,8 +2046,8 @@ static inline int sx_get_serial_info(struct specialix_port * port,
 }
 
 
-static int sx_ioctl(struct tty_struct * tty, struct file * filp,
-                    unsigned int cmd, unsigned long arg)
+static int sx_ioctl(struct tty_struct *tty, struct file *filp,
+				unsigned int cmd, unsigned long arg)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	int retval;
@@ -2007,7 +2061,7 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp,
 	}
 
 	switch (cmd) {
-	 case TCSBRK:	/* SVID version: non-zero arg --> no break */
+	case TCSBRK:	/* SVID version: non-zero arg --> no break */
 		retval = tty_check_change(tty);
 		if (retval) {
 			func_exit();
@@ -2017,7 +2071,7 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp,
 		if (!arg)
 			sx_send_break(port, HZ/4);	/* 1/4 second */
 		return 0;
-	 case TCSBRKP:	/* support for POSIX tcsendbreak() */
+	case TCSBRKP:	/* support for POSIX tcsendbreak() */
 		retval = tty_check_change(tty);
 		if (retval) {
 			func_exit();
@@ -2027,13 +2081,13 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp,
 		sx_send_break(port, arg ? arg*(HZ/10) : HZ/4);
 		func_exit();
 		return 0;
-	 case TIOCGSERIAL:
+	case TIOCGSERIAL:
 		 func_exit();
 		return sx_get_serial_info(port, argp);
-	 case TIOCSSERIAL:
+	case TIOCSSERIAL:
 		 func_exit();
 		return sx_set_serial_info(port, argp);
-	 default:
+	default:
 		 func_exit();
 		return -ENOIOCTLCMD;
 	}
@@ -2042,7 +2096,7 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp,
 }
 
 
-static void sx_throttle(struct tty_struct * tty)
+static void sx_throttle(struct tty_struct *tty)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	struct specialix_board *bp;
@@ -2058,15 +2112,16 @@ static void sx_throttle(struct tty_struct * tty)
 	bp = port_Board(port);
 
 	/* Use DTR instead of RTS ! */
-	if (SX_CRTSCTS (tty))
+	if (SX_CRTSCTS(tty))
 		port->MSVR &= ~MSVR_DTR;
 	else {
 		/* Auch!!! I think the system shouldn't call this then. */
 		/* Or maybe we're supposed (allowed?) to do our side of hw
 		   handshake anyway, even when hardware handshake is off.
 		   When you see this in your logs, please report.... */
-		printk (KERN_ERR "sx%d: Need to throttle, but can't (hardware hs is off)\n",
-	                 port_No (port));
+		printk(KERN_ERR
+		   "sx%d: Need to throttle, but can't (hardware hs is off)\n",
+							port_No(port));
 	}
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CAR, port_No(port));
@@ -2086,7 +2141,7 @@ static void sx_throttle(struct tty_struct * tty)
 }
 
 
-static void sx_unthrottle(struct tty_struct * tty)
+static void sx_unthrottle(struct tty_struct *tty)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	struct specialix_board *bp;
@@ -2103,9 +2158,9 @@ static void sx_unthrottle(struct tty_struct * tty)
 
 	spin_lock_irqsave(&port->lock, flags);
 	/* XXXX Use DTR INSTEAD???? */
-	if (SX_CRTSCTS(tty)) {
+	if (SX_CRTSCTS(tty))
 		port->MSVR |= MSVR_DTR;
-	} /* Else clause: see remark in "sx_throttle"... */
+	/* Else clause: see remark in "sx_throttle"... */
 	spin_lock_irqsave(&bp->lock, flags);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	spin_unlock_irqrestore(&bp->lock, flags);
@@ -2127,7 +2182,7 @@ static void sx_unthrottle(struct tty_struct * tty)
 }
 
 
-static void sx_stop(struct tty_struct * tty)
+static void sx_stop(struct tty_struct *tty)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	struct specialix_board *bp;
@@ -2154,7 +2209,7 @@ static void sx_stop(struct tty_struct * tty)
 }
 
 
-static void sx_start(struct tty_struct * tty)
+static void sx_start(struct tty_struct *tty)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	struct specialix_board *bp;
@@ -2182,7 +2237,7 @@ static void sx_start(struct tty_struct * tty)
 	func_exit();
 }
 
-static void sx_hangup(struct tty_struct * tty)
+static void sx_hangup(struct tty_struct *tty)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	struct specialix_board *bp;
@@ -2201,8 +2256,9 @@ static void sx_hangup(struct tty_struct * tty)
 	spin_lock_irqsave(&port->lock, flags);
 	bp->count -= port->port.count;
 	if (bp->count < 0) {
-		printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n",
-			board_No(bp), bp->count, tty->index);
+		printk(KERN_ERR
+			"sx%d: sx_hangup: bad board count: %d port: %d\n",
+					board_No(bp), bp->count, tty->index);
 		bp->count = 0;
 	}
 	port->port.count = 0;
@@ -2215,11 +2271,12 @@ static void sx_hangup(struct tty_struct * tty)
 }
 
 
-static void sx_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
+static void sx_set_termios(struct tty_struct *tty,
+					struct ktermios *old_termios)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	unsigned long flags;
-	struct specialix_board  * bp;
+	struct specialix_board  *bp;
 
 	if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
 		return;
@@ -2283,10 +2340,12 @@ static int sx_init_drivers(void)
 	specialix_driver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(specialix_driver, &sx_ops);
 
-	if ((error = tty_register_driver(specialix_driver))) {
+	error = tty_register_driver(specialix_driver);
+	if (error) {
 		put_tty_driver(specialix_driver);
-		printk(KERN_ERR "sx: Couldn't register specialix IO8+ driver, error = %d\n",
-		       error);
+		printk(KERN_ERR
+		  "sx: Couldn't register specialix IO8+ driver, error = %d\n",
+								error);
 		func_exit();
 		return 1;
 	}
@@ -2323,9 +2382,9 @@ static int __init specialix_init(void)
 	printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n");
 	printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n");
 #ifdef CONFIG_SPECIALIX_RTSCTS
-	printk (KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
+	printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
 #else
-	printk (KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
+	printk(KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
 #endif
 
 	for (i = 0; i < SX_NBOARD; i++)
@@ -2344,27 +2403,27 @@ static int __init specialix_init(void)
 	{
 		struct pci_dev *pdev = NULL;
 
-		i=0;
+		i = 0;
 		while (i < SX_NBOARD) {
 			if (sx_board[i].flags & SX_BOARD_PRESENT) {
 				i++;
 				continue;
 			}
-			pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
-			                        PCI_DEVICE_ID_SPECIALIX_IO8,
-			                        pdev);
-			if (!pdev) break;
+			pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX,
+					PCI_DEVICE_ID_SPECIALIX_IO8, pdev);
+			if (!pdev)
+				break;
 
 			if (pci_enable_device(pdev))
 				continue;
 
 			sx_board[i].irq = pdev->irq;
 
-			sx_board[i].base = pci_resource_start (pdev, 2);
+			sx_board[i].base = pci_resource_start(pdev, 2);
 
 			sx_board[i].flags |= SX_BOARD_IS_PCI;
 			if (!sx_probe(&sx_board[i]))
-				found ++;
+				found++;
 		}
 		/* May exit pci_get sequence early with lots of boards */
 		if (pdev != NULL)
@@ -2411,10 +2470,10 @@ static int __init specialix_init_module(void)
 	func_enter();
 
 	if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) {
-		for(i = 0; i < SX_NBOARD; i++) {
+		for (i = 0; i < SX_NBOARD; i++) {
 			sx_board[i].base = iobase[i];
 			sx_board[i].irq = irq[i];
-			sx_board[i].count= 0;
+			sx_board[i].count = 0;
 		}
 	}
 
-- 
cgit v1.2.3


From d2fbd0f2f9f5a34831a0b8fe6b16c6e1afba1200 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:17:16 +0100
Subject: specialix: Code cleanups

Go through the inlines and other oddments that are iffy. Remove various bits
of dead code and bogus debug. Turn the crtsdts compile time option into a
runtime switch.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/specialix.txt |   8 +-
 drivers/char/Kconfig        |  10 --
 drivers/char/specialix.c    | 216 +++++++++-----------------------------------
 3 files changed, 47 insertions(+), 187 deletions(-)

diff --git a/Documentation/specialix.txt b/Documentation/specialix.txt
index 4a4b428ce8f..6eb6f3a3331 100644
--- a/Documentation/specialix.txt
+++ b/Documentation/specialix.txt
@@ -270,8 +270,8 @@ The pinout of the connectors on the IO8+ is:
 Hardware handshaking issues.
 ============================
 
-The driver can be compiled in two different ways. The default
-("Specialix DTR/RTS pin is RTS" is off) the pin behaves as DTR when
+The driver can be told to operate in two different ways. The default
+behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when
 hardware handshaking is off. It behaves as the RTS hardware
 handshaking signal when hardware handshaking is selected.
 
@@ -280,7 +280,7 @@ cable will either be compatible with hardware handshaking or with
 software handshaking. So switching on the fly is not really an
 option.
 
-I actually prefer to use the "Specialix DTR/RTS pin is RTS" option.
+I actually prefer to use the "specialix.sx_rtscts=1" option.
 This makes the DTR/RTS pin always an RTS pin, and ioctls to
 change DTR are always ignored. I have a cable that is configured
 for this. 
@@ -379,7 +379,5 @@ it doesn't fit in your computer, bring back the card.
             You have to WRITE to the address register to even 
             read-probe a CD186x register. Disable autodetection?
          -- Specialix: any suggestions?
-       - Arbitrary baud rates are not implemented yet. 
-            If you need this, bug me about it. 
 
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 650e6b44ce6..e0bbbfb6a36 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -300,16 +300,6 @@ config SPECIALIX
 	  and compile this driver as kernel loadable module which will be
 	  called specialix.
 
-config SPECIALIX_RTSCTS
-	bool "Specialix DTR/RTS pin is RTS"
-	depends on SPECIALIX
-	help
-	  The Specialix IO8+ card can only support either RTS or DTR. If you
-	  say N here, the driver will use the pin as "DTR" when the tty is in
-	  software handshake mode.  If you say Y here or hardware handshake is
-	  on, it will always be RTS.  Read the file
-	  <file:Documentation/specialix.txt> for more information.
-
 config SX
 	tristate "Specialix SX (and SI) card support"
 	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index c390c6cc030..f3184a8a75d 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -110,6 +110,7 @@
 
 static int sx_debug;
 static int sx_rxfifo = SPECIALIX_RXFIFO;
+static int sx_rtscts;
 
 #ifdef DEBUG
 #define dprintk(f, str...) if (sx_debug & f) printk(str)
@@ -134,25 +135,12 @@ static int sx_rxfifo = SPECIALIX_RXFIFO;
 #define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__)
 #define func_exit()  dprintk(SX_DEBUG_FLOW, "io8: exit  %s\n", __func__)
 
-#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
-
 
 /* Configurable options: */
 
 /* Am I paranoid or not ? ;-) */
 #define SPECIALIX_PARANOIA_CHECK
 
-/* Do I trust the IRQ from the card? (enabeling it doesn't seem to help)
-   When the IRQ routine leaves the chip in a state that is keeps on
-   requiring attention, the timer doesn't help either. */
-#undef SPECIALIX_TIMER
-
-#ifdef SPECIALIX_TIMER
-static int sx_poll = HZ;
-#endif
-
-
-
 /*
  * The following defines are mostly for testing purposes. But if you need
  * some nice reporting in your syslog, you can define them also.
@@ -162,16 +150,6 @@ static int sx_poll = HZ;
 
 
 
-#ifdef CONFIG_SPECIALIX_RTSCTS
-#define SX_CRTSCTS(bla) 1
-#else
-#define SX_CRTSCTS(tty) C_CRTSCTS(tty)
-#endif
-
-
-/* Used to be outb(0xff, 0x80); */
-#define short_pause() udelay(1)
-
 
 #define SPECIALIX_LEGAL_FLAGS \
 	(ASYNC_HUP_NOTIFY   | ASYNC_SAK          | ASYNC_SPLIT_TERMIOS   | \
@@ -190,14 +168,7 @@ static struct specialix_board sx_board[SX_NBOARD] =  {
 static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
 
 
-#ifdef SPECIALIX_TIMER
-static struct timer_list missed_irq_timer;
-static irqreturn_t sx_interrupt(int irq, void *dev_id);
-#endif
-
-
-
-static inline int sx_paranoia_check(struct specialix_port const *port,
+static int sx_paranoia_check(struct specialix_port const *port,
 				    char *name, const char *routine)
 {
 #ifdef SPECIALIX_PARANOIA_CHECK
@@ -288,7 +259,7 @@ static inline void sx_out_off(struct specialix_board  *bp,
 
 
 /* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR(struct specialix_board  *bp)
+static void sx_wait_CCR(struct specialix_board  *bp)
 {
 	unsigned long delay, flags;
 	unsigned char ccr;
@@ -307,7 +278,7 @@ static inline void sx_wait_CCR(struct specialix_board  *bp)
 
 
 /* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR_off(struct specialix_board  *bp)
+static void sx_wait_CCR_off(struct specialix_board  *bp)
 {
 	unsigned long delay;
 	unsigned char crr;
@@ -330,7 +301,7 @@ static inline void sx_wait_CCR_off(struct specialix_board  *bp)
  *  specialix IO8+ IO range functions.
  */
 
-static inline int sx_request_io_range(struct specialix_board *bp)
+static int sx_request_io_range(struct specialix_board *bp)
 {
 	return request_region(bp->base,
 		bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
@@ -338,7 +309,7 @@ static inline int sx_request_io_range(struct specialix_board *bp)
 }
 
 
-static inline void sx_release_io_range(struct specialix_board *bp)
+static void sx_release_io_range(struct specialix_board *bp)
 {
 	release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ?
 					SX_PCI_IO_SPACE : SX_IO_SPACE);
@@ -440,36 +411,10 @@ static int read_cross_byte(struct specialix_board *bp, int reg, int bit)
 }
 
 
-#ifdef SPECIALIX_TIMER
-void missed_irq(unsigned long data)
-{
-	unsigned char irq;
-	unsigned long flags;
-	struct specialix_board  *bp = (struct specialix_board *)data;
-
-	spin_lock_irqsave(&bp->lock, flags);
-	irq = sx_in((struct specialix_board *)data, CD186x_SRSR) &
-				(SRSR_RREQint | SRSR_TREQint | SRSR_MREQint);
-	spin_unlock_irqrestore(&bp->lock, flags);
-	if (irq) {
-		printk(KERN_INFO
-			"Missed interrupt... Calling int from timer. \n");
-		sx_interrupt(-1, bp);
-	}
-	mod_timer(&missed_irq_timer, jiffies + sx_poll);
-}
-#endif
-
-
-
 /* Main probing routine, also sets irq. */
 static int sx_probe(struct specialix_board *bp)
 {
 	unsigned char val1, val2;
-#if 0
-	int irqs = 0;
-	int retries;
-#endif
 	int rev;
 	int chip;
 
@@ -482,15 +427,15 @@ static int sx_probe(struct specialix_board *bp)
 
 	/* Are the I/O ports here ? */
 	sx_out_off(bp, CD186x_PPRL, 0x5a);
-	short_pause();
+	udelay(1);
 	val1 = sx_in_off(bp, CD186x_PPRL);
 
 	sx_out_off(bp, CD186x_PPRL, 0xa5);
-	short_pause();
+	udelay(1);
 	val2 = sx_in_off(bp, CD186x_PPRL);
 
 
-	if ((val1 != 0x5a) || (val2 != 0xa5)) {
+	if (val1 != 0x5a || val2 != 0xa5) {
 		printk(KERN_INFO
 			"sx%d: specialix IO8+ Board at 0x%03x not found.\n",
 						board_No(bp), bp->base);
@@ -522,50 +467,6 @@ static int sx_probe(struct specialix_board *bp)
 	}
 
 
-#if 0
-	/* It's time to find IRQ for this board */
-	for (retries = 0; retries < 5 && irqs <= 0; retries++) {
-		irqs = probe_irq_on();
-		sx_init_CD186x(bp);		   /* Reset CD186x chip      */
-		sx_out(bp, CD186x_CAR, 2);         /* Select port 2          */
-		sx_wait_CCR(bp);
-		sx_out(bp, CD186x_CCR, CCR_TXEN);  /* Enable transmitter     */
-		sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr   */
-		msleep(50);
-		irqs = probe_irq_off(irqs);
-
-		dprintk(SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
-		dprintk(SX_DEBUG_INIT, "TRAR = %02x, ", sx_in(bp, CD186x_TRAR));
-		dprintk(SX_DEBUG_INIT, "GIVR = %02x, ", sx_in(bp, CD186x_GIVR));
-		dprintk(SX_DEBUG_INIT, "GICR = %02x, ", sx_in(bp, CD186x_GICR));
-		dprintk(SX_DEBUG_INIT, "\n");
-
-		/* Reset CD186x again      */
-		if (!sx_init_CD186x(bp)) {
-			/* Hmmm. This is dead code anyway. */
-		}
-
-		dprintk(SX_DEBUG_INIT
-			"val1 = %02x, val2 = %02x, val3 = %02x.\n",
-				val1, val2, val3);
-
-	}
-
-#if 0
-	if (irqs <= 0) {
-		printk(KERN_ERR
-		  "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n",
-						board_No(bp), bp->base);
-		sx_release_io_range(bp);
-		func_exit();
-		return 1;
-	}
-#endif
-	printk(KERN_INFO "Started with irq=%d, but now have irq=%d.\n",
-								bp->irq, irqs);
-	if (irqs > 0)
-		bp->irq = irqs;
-#endif
 	/* Reset CD186x again  */
 	if (!sx_init_CD186x(bp)) {
 		sx_release_io_range(bp);
@@ -610,11 +511,6 @@ static int sx_probe(struct specialix_board *bp)
 
 	dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR));
 
-#ifdef SPECIALIX_TIMER
-	setup_timer(&missed_irq_timer, missed_irq, (unsigned long)bp);
-	mod_timer(&missed_irq_timer, jiffies + sx_poll);
-#endif
-
 	printk(KERN_INFO
     "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
 				board_No(bp), bp->base, bp->irq, chip, rev);
@@ -628,7 +524,7 @@ static int sx_probe(struct specialix_board *bp)
  *  Interrupt processing routines.
  * */
 
-static inline struct specialix_port *sx_get_port(struct specialix_board *bp,
+static struct specialix_port *sx_get_port(struct specialix_board *bp,
 					       unsigned char const *what)
 {
 	unsigned char channel;
@@ -654,7 +550,7 @@ static inline struct specialix_port *sx_get_port(struct specialix_board *bp,
 }
 
 
-static inline void sx_receive_exc(struct specialix_board *bp)
+static void sx_receive_exc(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -729,7 +625,7 @@ static inline void sx_receive_exc(struct specialix_board *bp)
 }
 
 
-static inline void sx_receive(struct specialix_board *bp)
+static void sx_receive(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -758,7 +654,7 @@ static inline void sx_receive(struct specialix_board *bp)
 }
 
 
-static inline void sx_transmit(struct specialix_board *bp)
+static void sx_transmit(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -838,7 +734,7 @@ static inline void sx_transmit(struct specialix_board *bp)
 }
 
 
-static inline void sx_check_modem(struct specialix_board *bp)
+static void sx_check_modem(struct specialix_board *bp)
 {
 	struct specialix_port *port;
 	struct tty_struct *tty;
@@ -853,7 +749,6 @@ static inline void sx_check_modem(struct specialix_board *bp)
 	tty = port->port.tty;
 
 	mcr = sx_in(bp, CD186x_MCR);
-	printk("mcr = %02x.\n", mcr);	/* FIXME */
 
 	if ((mcr & MCR_CDCHG)) {
 		dprintk(SX_DEBUG_SIGNALS, "CD just changed... ");
@@ -983,13 +878,6 @@ static void turn_ints_off(struct specialix_board *bp)
 	unsigned long flags;
 
 	func_enter();
-	if (bp->flags & SX_BOARD_IS_PCI) {
-		/* This was intended for enabeling the interrupt on the
-		 * PCI card. However it seems that it's already enabled
-		 * and as PCI interrupts can be shared, there is no real
-		 * reason to have to turn it off. */
-	}
-
 	spin_lock_irqsave(&bp->lock, flags);
 	(void) sx_in_off(bp, 0); /* Turn off interrupts. */
 	spin_unlock_irqrestore(&bp->lock, flags);
@@ -1003,9 +891,6 @@ static void turn_ints_on(struct specialix_board *bp)
 
 	func_enter();
 
-	if (bp->flags & SX_BOARD_IS_PCI) {
-		/* play with the PCI chip. See comment above. */
-	}
 	spin_lock_irqsave(&bp->lock, flags);
 	(void) sx_in(bp, 0); /* Turn ON interrupts. */
 	spin_unlock_irqrestore(&bp->lock, flags);
@@ -1015,7 +900,7 @@ static void turn_ints_on(struct specialix_board *bp)
 
 
 /* Called with disabled interrupts */
-static inline int sx_setup_board(struct specialix_board *bp)
+static int sx_setup_board(struct specialix_board *bp)
 {
 	int error;
 
@@ -1040,7 +925,7 @@ static inline int sx_setup_board(struct specialix_board *bp)
 
 
 /* Called with disabled interrupts */
-static inline void sx_shutdown_board(struct specialix_board *bp)
+static void sx_shutdown_board(struct specialix_board *bp)
 {
 	func_enter();
 
@@ -1058,6 +943,12 @@ static inline void sx_shutdown_board(struct specialix_board *bp)
 	func_exit();
 }
 
+static unsigned int sx_crtscts(struct tty_struct *tty)
+{
+	if (sx_rtscts)
+		return C_CRTSCTS(tty);
+	return 1;
+}
 
 /*
  * Setting up port characteristics.
@@ -1090,7 +981,7 @@ static void sx_change_speed(struct specialix_board *bp,
 
 	/* The Specialix board doens't implement the RTS lines.
 	   They are used to set the IRQ level. Don't touch them. */
-	if (SX_CRTSCTS(tty))
+	if (sx_crtscts(tty))
 		port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
 	else
 		port->MSVR =  (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
@@ -1108,7 +999,7 @@ static void sx_change_speed(struct specialix_board *bp,
 	if (!baud) {
 		/* Drop DTR & exit */
 		dprintk(SX_DEBUG_TERMIOS, "Dropping DTR...  Hmm....\n");
-		if (!SX_CRTSCTS(tty)) {
+		if (!sx_crtscts(tty)) {
 			port->MSVR &= ~MSVR_DTR;
 			spin_lock_irqsave(&bp->lock, flags);
 			sx_out(bp, CD186x_MSVR, port->MSVR);
@@ -1118,7 +1009,7 @@ static void sx_change_speed(struct specialix_board *bp,
 		return;
 	} else {
 		/* Set DTR on */
-		if (!SX_CRTSCTS(tty))
+		if (!sx_crtscts(tty))
 			port->MSVR |= MSVR_DTR;
 	}
 
@@ -1448,7 +1339,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 		spin_lock_irqsave(&bp->lock, flags);
 		sx_out(bp, CD186x_CAR, port_No(port));
 		CD = sx_in(bp, CD186x_MSVR) & MSVR_CD;
-		if (SX_CRTSCTS(tty)) {
+		if (sx_crtscts(tty)) {
 			/* Activate RTS */
 			port->MSVR |= MSVR_DTR;		/* WTF? */
 			sx_out(bp, CD186x_MSVR, port->MSVR);
@@ -1600,7 +1491,7 @@ static void sx_close(struct tty_struct *tty, struct file *filp)
 	}
 
 	bp = port_Board(port);
-	if ((tty->count == 1) && (port->port.count != 1)) {
+	if (tty->count == 1 && port->port.count != 1) {
 		printk(KERN_ERR "sx%d: sx_close: bad port count;"
 		       " tty->count is 1, port count is %d\n",
 		       board_No(bp), port->port.count);
@@ -1868,17 +1759,15 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file)
 	dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
 			port_No(port), status, sx_in(bp, CD186x_CAR));
 	dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
-	if (SX_CRTSCTS(port->port.tty)) {
-		result  = /*   (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
+	if (sx_crtscts(port->port.tty)) {
+		result  = TIOCM_DTR | TIOCM_DSR
 			  |   ((status & MSVR_DTR) ? TIOCM_RTS : 0)
 			  |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-			  |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
 			  |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
 	} else {
-		result  = /*   (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */
+		result  = TIOCM_RTS | TIOCM_DSR
 			  |   ((status & MSVR_DTR) ? TIOCM_DTR : 0)
 			  |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-			  |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
 			  |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
 	}
 
@@ -1905,24 +1794,14 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 	bp = port_Board(port);
 
 	spin_lock_irqsave(&port->lock, flags);
-   /*	if (set & TIOCM_RTS)
-		port->MSVR |= MSVR_RTS; */
-   /*   if (set & TIOCM_DTR)
-		port->MSVR |= MSVR_DTR; */
-
-	if (SX_CRTSCTS(port->port.tty)) {
+	if (sx_crtscts(port->port.tty)) {
 		if (set & TIOCM_RTS)
 			port->MSVR |= MSVR_DTR;
 	} else {
 		if (set & TIOCM_DTR)
 			port->MSVR |= MSVR_DTR;
 	}
-
-  /*	if (clear & TIOCM_RTS)
-		port->MSVR &= ~MSVR_RTS; */
-  /*    if (clear & TIOCM_DTR)
-		port->MSVR &= ~MSVR_DTR; */
-	if (SX_CRTSCTS(port->port.tty)) {
+	if (sx_crtscts(port->port.tty)) {
 		if (clear & TIOCM_RTS)
 			port->MSVR &= ~MSVR_DTR;
 	} else {
@@ -1939,7 +1818,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 
-static inline void sx_send_break(struct specialix_port *port,
+static void sx_send_break(struct specialix_port *port,
 						unsigned long length)
 {
 	struct specialix_board *bp = port_Board(port);
@@ -1967,7 +1846,7 @@ static inline void sx_send_break(struct specialix_port *port,
 }
 
 
-static inline int sx_set_serial_info(struct specialix_port *port,
+static int sx_set_serial_info(struct specialix_port *port,
 					struct serial_struct __user *newinfo)
 {
 	struct serial_struct tmp;
@@ -2015,7 +1894,7 @@ static inline int sx_set_serial_info(struct specialix_port *port,
 }
 
 
-static inline int sx_get_serial_info(struct specialix_port *port,
+static int sx_get_serial_info(struct specialix_port *port,
 				     struct serial_struct __user *retinfo)
 {
 	struct serial_struct tmp;
@@ -2112,7 +1991,7 @@ static void sx_throttle(struct tty_struct *tty)
 	bp = port_Board(port);
 
 	/* Use DTR instead of RTS ! */
-	if (SX_CRTSCTS(tty))
+	if (sx_crtscts(tty))
 		port->MSVR &= ~MSVR_DTR;
 	else {
 		/* Auch!!! I think the system shouldn't call this then. */
@@ -2158,7 +2037,7 @@ static void sx_unthrottle(struct tty_struct *tty)
 
 	spin_lock_irqsave(&port->lock, flags);
 	/* XXXX Use DTR INSTEAD???? */
-	if (SX_CRTSCTS(tty))
+	if (sx_crtscts(tty))
 		port->MSVR |= MSVR_DTR;
 	/* Else clause: see remark in "sx_throttle"... */
 	spin_lock_irqsave(&bp->lock, flags);
@@ -2381,11 +2260,11 @@ static int __init specialix_init(void)
 
 	printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n");
 	printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n");
-#ifdef CONFIG_SPECIALIX_RTSCTS
-	printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
-#else
-	printk(KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
-#endif
+	if (sx_rtscts)
+		printk(KERN_INFO
+			"sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
+	else
+		printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
 
 	for (i = 0; i < SX_NBOARD; i++)
 		spin_lock_init(&sx_board[i].lock);
@@ -2443,16 +2322,13 @@ static int __init specialix_init(void)
 }
 
 static int iobase[SX_NBOARD]  = {0,};
-
-static int irq [SX_NBOARD] = {0,};
+static int irq[SX_NBOARD] = {0,};
 
 module_param_array(iobase, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);
 module_param(sx_debug, int, 0);
+module_param(sx_rtscts, int, 0);
 module_param(sx_rxfifo, int, 0);
-#ifdef SPECIALIX_TIMER
-module_param(sx_poll, int, 0);
-#endif
 
 /*
  * You can setup up to 4 boards.
@@ -2492,10 +2368,6 @@ static void __exit specialix_exit_module(void)
 	for (i = 0; i < SX_NBOARD; i++)
 		if (sx_board[i].flags & SX_BOARD_PRESENT)
 			sx_release_io_range(&sx_board[i]);
-#ifdef SPECIALIX_TIMER
-	del_timer_sync(&missed_irq_timer);
-#endif
-
 	func_exit();
 }
 
-- 
cgit v1.2.3


From 30252ec958897d61925a4baf79cd9411a6be0486 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:17:32 +0100
Subject: epca: Fix comments and move break

The ioctls it talks about are midlayer provided.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/epca.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index ac9995f6578..94dca7b082b 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -2189,11 +2189,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
 		bc = ch->brdchan;
 	else
 		return -EINVAL;
-	/*
-	 * For POSIX compliance we need to add more ioctls. See tty_ioctl.c in
-	 * /usr/src/linux/drivers/char for a good example. In particular think
-	 * about adding TCSETAF, TCSETAW, TCSETA, TCSETSF, TCSETSW, TCSETS.
-	 */
 	switch (cmd) {
 	case TCSBRK:	/* SVID version: non-zero arg --> no break */
 		retval = tty_check_change(tty);
-- 
cgit v1.2.3


From 8ca8b9005a742edf8d82749d4ad4e616405fbdc4 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:17:43 +0100
Subject: mxser: remove dead code

Old style ioctl break code can go

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mxser.c | 36 ------------------------------------
 1 file changed, 36 deletions(-)

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 6307e301bd2..1fb25571bf8 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1464,27 +1464,6 @@ static int mxser_get_lsr_info(struct mxser_port *info,
 	return put_user(result, value);
 }
 
-/*
- * This routine sends a break character out the serial port.
- */
-static void mxser_send_break(struct mxser_port *info, int duration)
-{
-	unsigned long flags;
-
-	if (!info->ioaddr)
-		return;
-	set_current_state(TASK_INTERRUPTIBLE);
-	spin_lock_irqsave(&info->slock, flags);
-	outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
-		info->ioaddr + UART_LCR);
-	spin_unlock_irqrestore(&info->slock, flags);
-	schedule_timeout(duration);
-	spin_lock_irqsave(&info->slock, flags);
-	outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
-		info->ioaddr + UART_LCR);
-	spin_unlock_irqrestore(&info->slock, flags);
-}
-
 static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct mxser_port *info = tty->driver_data;
@@ -1872,21 +1851,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 		return -EIO;
 
 	switch (cmd) {
-	case TCSBRK:		/* SVID version: non-zero arg --> no break */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		if (!arg)
-			mxser_send_break(info, HZ / 4);	/* 1/4 second */
-		return 0;
-	case TCSBRKP:		/* support for POSIX tcsendbreak() */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
-		return 0;
 	case TIOCGSERIAL:
 		lock_kernel();
 		retval = mxser_get_serial_info(info, argp);
-- 
cgit v1.2.3


From abbe629ae4011d2020047f41bea9f9e4b0ec4361 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:17:53 +0100
Subject: tty: Mark unconverted drivers as BROKEN

Nobody seems to use these drivers anyway so if they want them they can
fix them up. I don't have the needed info to add break_ctl support to them.
Send patches if you don't like it.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index e0bbbfb6a36..ba8782b9c21 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -167,7 +167,7 @@ config CYZ_INTR
 
 config DIGIEPCA
 	tristate "Digiboard Intelligent Async Support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) && BROKEN
 	---help---
 	  This is a driver for Digi International's Xx, Xeve, and Xem series
 	  of cards which provide multiple serial ports. You would need
@@ -275,7 +275,7 @@ config N_HDLC
 
 config RISCOM8
 	tristate "SDL RISCom/8 card support"
-	depends on SERIAL_NONSTANDARD
+	depends on SERIAL_NONSTANDARD && BROKEN
 	help
 	  This is a driver for the SDL Communications RISCom/8 multiport card,
 	  which gives you many serial ports. You would need something like
@@ -288,7 +288,7 @@ config RISCOM8
 
 config SPECIALIX
 	tristate "Specialix IO8+ card support"
-	depends on SERIAL_NONSTANDARD
+	depends on SERIAL_NONSTANDARD && BROKEN
 	help
 	  This is a driver for the Specialix IO8+ multiport card (both the
 	  ISA and the PCI version) which gives you many serial ports. You
-- 
cgit v1.2.3


From 9e98966c7bb94355689478bc84cc3e0c190f977e Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:18:03 +0100
Subject: tty: rework break handling

Some hardware needs to do break handling itself and may have partial
support only. Make break_ctl return an error code. Add a tty driver flag
so you can indicate driver hardware side break support.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/Kconfig              |  2 +-
 drivers/char/amiserial.c          |  3 +-
 drivers/char/cyclades.c           |  8 ++---
 drivers/char/esp.c                |  5 +--
 drivers/char/istallion.c          | 11 +++---
 drivers/char/moxa.c               |  3 +-
 drivers/char/mxser.c              |  3 +-
 drivers/char/pcmcia/synclink_cs.c |  5 +--
 drivers/char/rocket.c             |  5 +--
 drivers/char/sx.c                 |  3 +-
 drivers/char/synclink.c           |  7 ++--
 drivers/char/synclink_gt.c        |  9 ++---
 drivers/char/synclinkmp.c         |  9 ++---
 drivers/char/tty_io.c             | 71 +++++++++++++++------------------------
 drivers/char/vme_scc.c            |  5 +--
 drivers/isdn/capi/capi.c          |  3 +-
 drivers/serial/serial_core.c      |  3 +-
 drivers/usb/class/cdc-acm.c       |  9 +++--
 drivers/usb/serial/usb-serial.c   |  3 +-
 include/linux/tty_driver.h        | 14 ++++++--
 20 files changed, 97 insertions(+), 84 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ba8782b9c21..a185263b586 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -218,7 +218,7 @@ config MOXA_SMARTIO
 
 config ISI
 	tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
-	depends on SERIAL_NONSTANDARD && PCI
+	depends on SERIAL_NONSTANDARD && PCI && BROKEN
 	select FW_LOADER
 	help
 	  This is a driver for the Multi-Tech cards which provide several
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 37457e5a4f2..3530ff417a5 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1248,7 +1248,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file,
 /*
  * rs_break() --- routine which turns the break handling on or off
  */
-static void rs_break(struct tty_struct *tty, int break_state)
+static int rs_break(struct tty_struct *tty, int break_state)
 {
 	struct async_struct * info = (struct async_struct *)tty->driver_data;
 	unsigned long flags;
@@ -1263,6 +1263,7 @@ static void rs_break(struct tty_struct *tty, int break_state)
 	  custom.adkcon = AC_UARTBRK;
 	mb();
 	local_irq_restore(flags);
+	return 0;
 }
 
 
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index e991dc85f2f..fe6d774fe2e 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -3700,14 +3700,15 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 /*
  * cy_break() --- routine which turns the break handling on or off
  */
-static void cy_break(struct tty_struct *tty, int break_state)
+static int cy_break(struct tty_struct *tty, int break_state)
 {
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	unsigned long flags;
+	int retval = 0;
 
 	if (serial_paranoia_check(info, tty->name, "cy_break"))
-		return;
+		return -EINVAL;
 
 	card = info->card;
 
@@ -3736,8 +3737,6 @@ static void cy_break(struct tty_struct *tty, int break_state)
 			}
 		}
 	} else {
-		int retval;
-
 		if (break_state == -1) {
 			retval = cyz_issue_cmd(card,
 				info->line - card->first_line,
@@ -3758,6 +3757,7 @@ static void cy_break(struct tty_struct *tty, int break_state)
 		}
 	}
 	spin_unlock_irqrestore(&card->card_lock, flags);
+	return retval;
 }				/* cy_break */
 
 static int get_mon_info(struct cyclades_port *info,
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index 2eaf09f93e3..7f077c0097f 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -1725,13 +1725,13 @@ static int esp_tiocmset(struct tty_struct *tty, struct file *file,
 /*
  * rs_break() --- routine which turns the break handling on or off
  */
-static void esp_break(struct tty_struct *tty, int break_state)
+static int esp_break(struct tty_struct *tty, int break_state)
 {
 	struct esp_struct *info = tty->driver_data;
 	unsigned long flags;
 
 	if (serial_paranoia_check(info, tty->name, "esp_break"))
-		return;
+		return -EINVAL;
 
 	if (break_state == -1) {
 		spin_lock_irqsave(&info->lock, flags);
@@ -1747,6 +1747,7 @@ static void esp_break(struct tty_struct *tty, int break_state)
 		serial_out(info, UART_ESI_CMD2, 0x00);
 		spin_unlock_irqrestore(&info->lock, flags);
 	}
+	return 0;
 }
 
 static int rs_ioctl(struct tty_struct *tty, struct file *file,
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 7930fba4baf..63d22b5ebc0 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -609,7 +609,7 @@ static void	stli_unthrottle(struct tty_struct *tty);
 static void	stli_stop(struct tty_struct *tty);
 static void	stli_start(struct tty_struct *tty);
 static void	stli_flushbuffer(struct tty_struct *tty);
-static void	stli_breakctl(struct tty_struct *tty, int state);
+static int	stli_breakctl(struct tty_struct *tty, int state);
 static void	stli_waituntilsent(struct tty_struct *tty, int timeout);
 static void	stli_sendxchar(struct tty_struct *tty, char ch);
 static void	stli_hangup(struct tty_struct *tty);
@@ -1909,7 +1909,7 @@ static void stli_flushbuffer(struct tty_struct *tty)
 
 /*****************************************************************************/
 
-static void stli_breakctl(struct tty_struct *tty, int state)
+static int stli_breakctl(struct tty_struct *tty, int state)
 {
 	struct stlibrd	*brdp;
 	struct stliport	*portp;
@@ -1917,15 +1917,16 @@ static void stli_breakctl(struct tty_struct *tty, int state)
 
 	portp = tty->driver_data;
 	if (portp == NULL)
-		return;
+		return -EINVAL;
 	if (portp->brdnr >= stli_nrbrds)
-		return;
+		return -EINVAL;
 	brdp = stli_brds[portp->brdnr];
 	if (brdp == NULL)
-		return;
+		return -EINVAL;
 
 	arg = (state == -1) ? BREAKON : BREAKOFF;
 	stli_cmdwait(brdp, portp, A_BREAK, &arg, sizeof(long), 0);
+	return 0;
 }
 
 /*****************************************************************************/
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 2bba250ffc8..d3d7864e0c1 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -374,12 +374,13 @@ copy:
 	return ret;
 }
 
-static void moxa_break_ctl(struct tty_struct *tty, int state)
+static int moxa_break_ctl(struct tty_struct *tty, int state)
 {
 	struct moxa_port *port = tty->driver_data;
 
 	moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
 			Magic_code);
+	return 0;
 }
 
 static const struct tty_operations moxa_ops = {
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 1fb25571bf8..f04c3c58a05 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -2183,7 +2183,7 @@ static void mxser_hangup(struct tty_struct *tty)
 /*
  * mxser_rs_break() --- routine which turns the break handling on or off
  */
-static void mxser_rs_break(struct tty_struct *tty, int break_state)
+static int mxser_rs_break(struct tty_struct *tty, int break_state)
 {
 	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
@@ -2196,6 +2196,7 @@ static void mxser_rs_break(struct tty_struct *tty, int break_state)
 		outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
 			info->ioaddr + UART_LCR);
 	spin_unlock_irqrestore(&info->slock, flags);
+	return 0;
 }
 
 static void mxser_receive_chars(struct mxser_port *port, int *status)
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index b694d430f10..d1fceabe3ae 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2230,7 +2230,7 @@ static int tiocmset(struct tty_struct *tty, struct file *file,
  * Arguments:		tty		pointer to tty instance data
  *			break_state	-1=set break condition, 0=clear
  */
-static void mgslpc_break(struct tty_struct *tty, int break_state)
+static int mgslpc_break(struct tty_struct *tty, int break_state)
 {
 	MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
 	unsigned long flags;
@@ -2240,7 +2240,7 @@ static void mgslpc_break(struct tty_struct *tty, int break_state)
 			 __FILE__,__LINE__, info->device_name, break_state);
 
 	if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
-		return;
+		return -EINVAL;
 
 	spin_lock_irqsave(&info->lock,flags);
  	if (break_state == -1)
@@ -2248,6 +2248,7 @@ static void mgslpc_break(struct tty_struct *tty, int break_state)
 	else
 		clear_reg_bits(info, CHA+DAFO, BIT6);
 	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
 }
 
 /* Service an IOCTL request
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index e670eae2f51..584d791e84a 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -1236,13 +1236,13 @@ static void rp_set_termios(struct tty_struct *tty,
 	}
 }
 
-static void rp_break(struct tty_struct *tty, int break_state)
+static int rp_break(struct tty_struct *tty, int break_state)
 {
 	struct r_port *info = (struct r_port *) tty->driver_data;
 	unsigned long flags;
 
 	if (rocket_paranoia_check(info, "rp_break"))
-		return;
+		return -EINVAL;
 
 	spin_lock_irqsave(&info->slock, flags);
 	if (break_state == -1)
@@ -1250,6 +1250,7 @@ static void rp_break(struct tty_struct *tty, int break_state)
 	else
 		sClrBreak(&info->channel);
 	spin_unlock_irqrestore(&info->slock, flags);
+	return 0;
 }
 
 /*
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index d5cffcd6a57..2162439bbe4 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1840,7 +1840,7 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 	return rc;
 }
 
-static void sx_break(struct tty_struct *tty, int flag)
+static int sx_break(struct tty_struct *tty, int flag)
 {
 	struct sx_port *port = tty->driver_data;
 	int rv;
@@ -1857,6 +1857,7 @@ static void sx_break(struct tty_struct *tty, int flag)
 			read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat)));
 	unlock_kernel();
 	func_exit();
+	return 0;
 }
 
 static int sx_tiocmget(struct tty_struct *tty, struct file *file)
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 527d220aa4a..ef6706f0906 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -2897,9 +2897,9 @@ static int tiocmset(struct tty_struct *tty, struct file *file,
  *
  * Arguments:		tty		pointer to tty instance data
  *			break_state	-1=set break condition, 0=clear
- * Return Value:	None
+ * Return Value:	error code
  */
-static void mgsl_break(struct tty_struct *tty, int break_state)
+static int mgsl_break(struct tty_struct *tty, int break_state)
 {
 	struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
 	unsigned long flags;
@@ -2909,7 +2909,7 @@ static void mgsl_break(struct tty_struct *tty, int break_state)
 			 __FILE__,__LINE__, info->device_name, break_state);
 			 
 	if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
-		return;
+		return -EINVAL;
 
 	spin_lock_irqsave(&info->irq_spinlock,flags);
  	if (break_state == -1)
@@ -2917,6 +2917,7 @@ static void mgsl_break(struct tty_struct *tty, int break_state)
 	else 
 		usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
 	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+	return 0;
 	
 }	/* end of mgsl_break() */
 
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 2c3e43bb2cc..cf87bb89a77 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -165,7 +165,7 @@ static int  read_proc(char *page, char **start, off_t off, int count,int *eof, v
 static int  chars_in_buffer(struct tty_struct *tty);
 static void throttle(struct tty_struct * tty);
 static void unthrottle(struct tty_struct * tty);
-static void set_break(struct tty_struct *tty, int break_state);
+static int set_break(struct tty_struct *tty, int break_state);
 
 /*
  * generic HDLC support and callbacks
@@ -513,7 +513,7 @@ static int  wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
 static int  tiocmget(struct tty_struct *tty, struct file *file);
 static int  tiocmset(struct tty_struct *tty, struct file *file,
 		     unsigned int set, unsigned int clear);
-static void set_break(struct tty_struct *tty, int break_state);
+static int set_break(struct tty_struct *tty, int break_state);
 static int  get_interface(struct slgt_info *info, int __user *if_mode);
 static int  set_interface(struct slgt_info *info, int if_mode);
 static int  set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
@@ -1452,14 +1452,14 @@ static void unthrottle(struct tty_struct * tty)
  * set or clear transmit break condition
  * break_state	-1=set break condition, 0=clear
  */
-static void set_break(struct tty_struct *tty, int break_state)
+static int set_break(struct tty_struct *tty, int break_state)
 {
 	struct slgt_info *info = tty->driver_data;
 	unsigned short value;
 	unsigned long flags;
 
 	if (sanity_check(info, tty->name, "set_break"))
-		return;
+		return -EINVAL;
 	DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
 
 	spin_lock_irqsave(&info->lock,flags);
@@ -1470,6 +1470,7 @@ static void set_break(struct tty_struct *tty, int break_state)
 		value &= ~BIT6;
 	wr_reg16(info, TCR, value);
 	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
 }
 
 #if SYNCLINK_GENERIC_HDLC
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 5768c413634..c0490cbd0db 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -527,7 +527,7 @@ static int  read_proc(char *page, char **start, off_t off, int count,int *eof, v
 static int  chars_in_buffer(struct tty_struct *tty);
 static void throttle(struct tty_struct * tty);
 static void unthrottle(struct tty_struct * tty);
-static void set_break(struct tty_struct *tty, int break_state);
+static int set_break(struct tty_struct *tty, int break_state);
 
 #if SYNCLINK_GENERIC_HDLC
 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
@@ -552,7 +552,7 @@ static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
 static int  tiocmget(struct tty_struct *tty, struct file *file);
 static int  tiocmset(struct tty_struct *tty, struct file *file,
 		     unsigned int set, unsigned int clear);
-static void set_break(struct tty_struct *tty, int break_state);
+static int  set_break(struct tty_struct *tty, int break_state);
 
 static void add_device(SLMP_INFO *info);
 static void device_init(int adapter_num, struct pci_dev *pdev);
@@ -1587,7 +1587,7 @@ static void unthrottle(struct tty_struct * tty)
 /* set or clear transmit break condition
  * break_state	-1=set break condition, 0=clear
  */
-static void set_break(struct tty_struct *tty, int break_state)
+static int set_break(struct tty_struct *tty, int break_state)
 {
 	unsigned char RegValue;
 	SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
@@ -1598,7 +1598,7 @@ static void set_break(struct tty_struct *tty, int break_state)
 			 __FILE__,__LINE__, info->device_name, break_state);
 
 	if (sanity_check(info, tty->name, "set_break"))
-		return;
+		return -EINVAL;
 
 	spin_lock_irqsave(&info->lock,flags);
 	RegValue = read_reg(info, CTL);
@@ -1608,6 +1608,7 @@ static void set_break(struct tty_struct *tty, int break_state)
 		RegValue &= ~BIT3;
 	write_reg(info, CTL, RegValue);
 	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
 }
 
 #if SYNCLINK_GENERIC_HDLC
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index d27a08b374d..d94cd8410c5 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2849,16 +2849,29 @@ static int tiocsetd(struct tty_struct *tty, int __user *p)
 
 static int send_break(struct tty_struct *tty, unsigned int duration)
 {
-	if (tty_write_lock(tty, 0) < 0)
-		return -EINTR;
-	tty->ops->break_ctl(tty, -1);
-	if (!signal_pending(current))
-		msleep_interruptible(duration);
-	tty->ops->break_ctl(tty, 0);
-	tty_write_unlock(tty);
-	if (signal_pending(current))
-		return -EINTR;
-	return 0;
+	int retval;
+
+	if (tty->ops->break_ctl == NULL)
+		return 0;
+
+	if (tty->driver->flags & TTY_DRIVER_HARDWARE_BREAK)
+		retval = tty->ops->break_ctl(tty, duration);
+	else {
+		/* Do the work ourselves */
+		if (tty_write_lock(tty, 0) < 0)
+			return -EINTR;
+		retval = tty->ops->break_ctl(tty, -1);
+		if (retval)
+			goto out;
+		if (!signal_pending(current))
+			msleep_interruptible(duration);
+		retval = tty->ops->break_ctl(tty, 0);
+out:
+		tty_write_unlock(tty);
+		if (signal_pending(current))
+			retval = -EINTR;
+	}
+	return retval;
 }
 
 /**
@@ -2949,36 +2962,6 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	    tty->driver->subtype == PTY_TYPE_MASTER)
 		real_tty = tty->link;
 
-	/*
-	 * Break handling by driver
-	 */
-
-	retval = -EINVAL;
-
-	if (!tty->ops->break_ctl) {
-		switch (cmd) {
-		case TIOCSBRK:
-		case TIOCCBRK:
-			if (tty->ops->ioctl)
-				retval = tty->ops->ioctl(tty, file, cmd, arg);
-			if (retval != -EINVAL && retval != -ENOIOCTLCMD)
-				printk(KERN_WARNING "tty: driver %s needs updating to use break_ctl\n", tty->driver->name);
-			return retval;
-
-		/* These two ioctl's always return success; even if */
-		/* the driver doesn't support them. */
-		case TCSBRK:
-		case TCSBRKP:
-			if (!tty->ops->ioctl)
-				return 0;
-			retval = tty->ops->ioctl(tty, file, cmd, arg);
-			if (retval != -EINVAL && retval != -ENOIOCTLCMD)
-				printk(KERN_WARNING "tty: driver %s needs updating to use break_ctl\n", tty->driver->name);
-			if (retval == -ENOIOCTLCMD)
-				retval = 0;
-			return retval;
-		}
-	}
 
 	/*
 	 * Factor out some common prep work
@@ -3000,6 +2983,9 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		break;
 	}
 
+	/*
+	 *	Now do the stuff.
+	 */
 	switch (cmd) {
 	case TIOCSTI:
 		return tiocsti(tty, p);
@@ -3043,12 +3029,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	 */
 	case TIOCSBRK:	/* Turn break on, unconditionally */
 		if (tty->ops->break_ctl)
-			tty->ops->break_ctl(tty, -1);
+			return tty->ops->break_ctl(tty, -1);
 		return 0;
-
 	case TIOCCBRK:	/* Turn break off, unconditionally */
 		if (tty->ops->break_ctl)
-			tty->ops->break_ctl(tty, 0);
+			return tty->ops->break_ctl(tty, 0);
 		return 0;
 	case TCSBRK:   /* SVID version: non-zero arg --> no break */
 		/* non-zero arg means wait for all output data
diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c
index f17ac043b55..69c5afe97f1 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/char/vme_scc.c
@@ -85,7 +85,7 @@ static irqreturn_t scc_rx_int(int irq, void *data);
 static irqreturn_t scc_stat_int(int irq, void *data);
 static irqreturn_t scc_spcond_int(int irq, void *data);
 static void scc_setsignals(struct scc_port *port, int dtr, int rts);
-static void scc_break_ctl(struct tty_struct *tty, int break_state);
+static int scc_break_ctl(struct tty_struct *tty, int break_state);
 
 static struct tty_driver *scc_driver;
 
@@ -942,7 +942,7 @@ static int scc_ioctl(struct tty_struct *tty, struct file *file,
 }
 
 
-static void scc_break_ctl(struct tty_struct *tty, int break_state)
+static int scc_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct scc_port *port = (struct scc_port *)tty->driver_data;
 	unsigned long	flags;
@@ -952,6 +952,7 @@ static void scc_break_ctl(struct tty_struct *tty, int break_state)
 	SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK, 
 			break_state ? TCR_SEND_BREAK : 0);
 	local_irq_restore(flags);
+	return 0;
 }
 
 
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 8a35029caca..19e005e81fe 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1302,11 +1302,12 @@ static void capinc_tty_hangup(struct tty_struct *tty)
 #endif
 }
 
-static void capinc_tty_break_ctl(struct tty_struct *tty, int state)
+static int capinc_tty_break_ctl(struct tty_struct *tty, int state)
 {
 #ifdef _DEBUG_TTYFUNCS
 	printk(KERN_DEBUG "capinc_tty_break_ctl(%d)\n", state);
 #endif
+	return 0;
 }
 
 static void capinc_tty_flush_buffer(struct tty_struct *tty)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 0bce1fe2c62..f977c98cfa9 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -934,7 +934,7 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
 	return ret;
 }
 
-static void uart_break_ctl(struct tty_struct *tty, int break_state)
+static int uart_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *port = state->port;
@@ -945,6 +945,7 @@ static void uart_break_ctl(struct tty_struct *tty, int break_state)
 		port->ops->break_ctl(port, break_state);
 
 	mutex_unlock(&state->mutex);
+	return 0;
 }
 
 static int uart_do_autoconfig(struct uart_state *state)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 95ae6377d7e..0725b1871f2 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -732,13 +732,16 @@ static void acm_tty_unthrottle(struct tty_struct *tty)
 	tasklet_schedule(&acm->urb_task);
 }
 
-static void acm_tty_break_ctl(struct tty_struct *tty, int state)
+static int acm_tty_break_ctl(struct tty_struct *tty, int state)
 {
 	struct acm *acm = tty->driver_data;
+	int retval;
 	if (!ACM_READY(acm))
-		return;
-	if (acm_send_break(acm, state ? 0xffff : 0))
+		return -EINVAL;
+	retval = acm_send_break(acm, state ? 0xffff : 0);
+	if (retval < 0)
 		dbg("send break failed");
+	return retval;
 }
 
 static int acm_tty_tiocmget(struct tty_struct *tty, struct file *file)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 51917b0f079..8c2d531eede 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -395,7 +395,7 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 		tty_termios_copy_hw(tty->termios, old);
 }
 
-static void serial_break(struct tty_struct *tty, int break_state)
+static int serial_break(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 
@@ -409,6 +409,7 @@ static void serial_break(struct tty_struct *tty, int break_state)
 		port->serial->type->break_ctl(tty, break_state);
 		unlock_kernel();
 	}
+	return 0;
 }
 
 static int serial_read_proc(char *page, char **start, off_t off, int count,
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index d2a00358676..e1065ac0d92 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -135,7 +135,7 @@
  *
  *	Optional:
  *
- * void (*break_ctl)(struct tty_stuct *tty, int state);
+ * int (*break_ctl)(struct tty_stuct *tty, int state);
  *
  * 	This optional routine requests the tty driver to turn on or
  * 	off BREAK status on the RS-232 port.  If state is -1,
@@ -146,6 +146,10 @@
  * 	handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
  * 	TIOCCBRK.
  *
+ *	If the driver sets TTY_DRIVER_HARDWARE_BREAK then the interface
+ *	will also be called with actual times and the hardware is expected
+ *	to do the delay work itself. 0 and -1 are still used for on/off.
+ *
  *	Optional: Required for TCSBRK/BRKP/etc handling.
  *
  * void (*wait_until_sent)(struct tty_struct *tty, int timeout);
@@ -192,7 +196,7 @@ struct tty_operations {
 	void (*stop)(struct tty_struct *tty);
 	void (*start)(struct tty_struct *tty);
 	void (*hangup)(struct tty_struct *tty);
-	void (*break_ctl)(struct tty_struct *tty, int state);
+	int (*break_ctl)(struct tty_struct *tty, int state);
 	void (*flush_buffer)(struct tty_struct *tty);
 	void (*set_ldisc)(struct tty_struct *tty);
 	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
@@ -285,12 +289,18 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
  * TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead
  *	use dynamic memory keyed through the devpts filesystem.  This
  *	is only applicable to the pty driver.
+ *
+ * TTY_DRIVER_HARDWARE_BREAK -- hardware handles break signals. Pass
+ *	the requested timeout to the caller instead of using a simple
+ *	on/off interface.
+ *
  */
 #define TTY_DRIVER_INSTALLED		0x0001
 #define TTY_DRIVER_RESET_TERMIOS	0x0002
 #define TTY_DRIVER_REAL_RAW		0x0004
 #define TTY_DRIVER_DYNAMIC_DEV		0x0008
 #define TTY_DRIVER_DEVPTS_MEM		0x0010
+#define TTY_DRIVER_HARDWARE_BREAK	0x0020
 
 /* tty driver types */
 #define TTY_DRIVER_TYPE_SYSTEM		0x0001
-- 
cgit v1.2.3


From dcbf1280796be7c0b74c4231f0ac9dd8aa1e2591 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:18:12 +0100
Subject: epca: Restore driver

Convert the driver to use the added hardware break support

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/Kconfig |  2 +-
 drivers/char/epca.c  | 38 +++++++++-----------------------------
 2 files changed, 10 insertions(+), 30 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index a185263b586..9ead63cd564 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -167,7 +167,7 @@ config CYZ_INTR
 
 config DIGIEPCA
 	tristate "Digiboard Intelligent Async Support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) && BROKEN
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
 	---help---
 	  This is a driver for Digi International's Xx, Xeve, and Xem series
 	  of cards which provide multiple serial ports. You would need
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 94dca7b082b..9d9ae1ca292 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -184,7 +184,7 @@ static void pc_stop(struct tty_struct *);
 static void pc_start(struct tty_struct *);
 static void pc_throttle(struct tty_struct *tty);
 static void pc_unthrottle(struct tty_struct *tty);
-static void digi_send_break(struct channel *ch, int msec);
+static int pc_send_break(struct tty_struct *tty, int msec);
 static void setup_empty_event(struct tty_struct *tty, struct channel *ch);
 static void epca_setup(char *, int *);
 
@@ -1040,6 +1040,7 @@ static const struct tty_operations pc_ops = {
 	.throttle = pc_throttle,
 	.unthrottle = pc_unthrottle,
 	.hangup = pc_hangup,
+	.break_ctl = pc_send_break
 };
 
 static int info_open(struct tty_struct *tty, struct file *filp)
@@ -1132,7 +1133,7 @@ static int __init pc_init(void)
 	pc_driver->init_termios.c_lflag = 0;
 	pc_driver->init_termios.c_ispeed = 9600;
 	pc_driver->init_termios.c_ospeed = 9600;
-	pc_driver->flags = TTY_DRIVER_REAL_RAW;
+	pc_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK;
 	tty_set_operations(pc_driver, &pc_ops);
 
 	pc_info->owner = THIS_MODULE;
@@ -2177,7 +2178,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
 	digiflow_t dflow;
-	int retval;
 	unsigned long flags;
 	unsigned int mflag, mstat;
 	unsigned char startc, stopc;
@@ -2190,31 +2190,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
 	else
 		return -EINVAL;
 	switch (cmd) {
-	case TCSBRK:	/* SVID version: non-zero arg --> no break */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		/* Setup an event to indicate when the transmit
-		   buffer empties */
-		spin_lock_irqsave(&epca_lock, flags);
-		setup_empty_event(tty, ch);
-		spin_unlock_irqrestore(&epca_lock, flags);
-		tty_wait_until_sent(tty, 0);
-		if (!arg)
-			digi_send_break(ch, HZ / 4);    /* 1/4 second */
-		return 0;
-	case TCSBRKP:	/* support for POSIX tcsendbreak() */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		/* Setup an event to indicate when the transmit buffer
-		   empties */
-		spin_lock_irqsave(&epca_lock, flags);
-		setup_empty_event(tty, ch);
-		spin_unlock_irqrestore(&epca_lock, flags);
-		tty_wait_until_sent(tty, 0);
-		digi_send_break(ch, arg ? arg*(HZ/10) : HZ/4);
-		return 0;
 	case TIOCMODG:
 		mflag = pc_tiocmget(tty, file);
 		if (put_user(mflag, (unsigned long __user *)argp))
@@ -2500,10 +2475,14 @@ static void pc_unthrottle(struct tty_struct *tty)
 	}
 }
 
-static void digi_send_break(struct channel *ch, int msec)
+static int pc_send_break(struct tty_struct *tty, int msec)
 {
+	struct channel *ch = (struct channel *) tty->driver_data;
 	unsigned long flags;
 
+	if (msec == -1)
+		return -EOPNOTSUPP;
+
 	spin_lock_irqsave(&epca_lock, flags);
 	globalwinon(ch);
 	/*
@@ -2516,6 +2495,7 @@ static void digi_send_break(struct channel *ch, int msec)
 	fepcmd(ch, SENDBREAK, msec, 0, 10, 0);
 	memoff(ch);
 	spin_unlock_irqrestore(&epca_lock, flags);
+	return 0;
 }
 
 /* Caller MUST hold the lock */
-- 
cgit v1.2.3


From 6d889724332e875ac07b6c88e08d9564c180824d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:18:21 +0100
Subject: isicom: restore using hardware break support

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/Kconfig  |  2 +-
 drivers/char/isicom.c | 30 +++++++++---------------------
 2 files changed, 10 insertions(+), 22 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 9ead63cd564..d3f8f0e7a5a 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -218,7 +218,7 @@ config MOXA_SMARTIO
 
 config ISI
 	tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
-	depends on SERIAL_NONSTANDARD && PCI && BROKEN
+	depends on SERIAL_NONSTANDARD && PCI
 	select FW_LOADER
 	help
 	  This is a driver for the Multi-Tech cards which provide several
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index d4281df10c2..8f7cc190b62 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -1181,14 +1181,17 @@ static int isicom_chars_in_buffer(struct tty_struct *tty)
 }
 
 /* ioctl et all */
-static inline void isicom_send_break(struct isi_port *port,
-	unsigned long length)
+static int isicom_send_break(struct tty_struct *tty, int length)
 {
+	struct isi_port *port = tty->driver_data;
 	struct isi_board *card = port->card;
 	unsigned long base = card->base;
 
+	if (length == -1)
+		return -EOPNOTSUPP;
+
 	if (!lock_card(card))
-		return;
+		return -EINVAL;
 
 	outw(0x8000 | ((port->channel) << (card->shift_count)) | 0x3, base);
 	outw((length & 0xff) << 8 | 0x00, base);
@@ -1196,6 +1199,7 @@ static inline void isicom_send_break(struct isi_port *port,
 	InterruptTheCard(base);
 
 	unlock_card(card);
+	return 0;
 }
 
 static int isicom_tiocmget(struct tty_struct *tty, struct file *file)
@@ -1305,28 +1309,11 @@ static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
 {
 	struct isi_port *port = tty->driver_data;
 	void __user *argp = (void __user *)arg;
-	int retval;
 
 	if (isicom_paranoia_check(port, tty->name, "isicom_ioctl"))
 		return -ENODEV;
 
 	switch (cmd) {
-	case TCSBRK:
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		if (!arg)
-			isicom_send_break(port, HZ/4);
-		return 0;
-
-	case TCSBRKP:
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		isicom_send_break(port, arg ? arg * (HZ/10) : HZ/4);
-		return 0;
 	case TIOCGSERIAL:
 		return isicom_get_serial_info(port, argp);
 
@@ -1459,6 +1446,7 @@ static const struct tty_operations isicom_ops = {
 	.flush_buffer		= isicom_flush_buffer,
 	.tiocmget		= isicom_tiocmget,
 	.tiocmset		= isicom_tiocmset,
+	.break_ctl		= isicom_send_break,
 };
 
 static int __devinit reset_card(struct pci_dev *pdev,
@@ -1832,7 +1820,7 @@ static int __init isicom_init(void)
 	isicom_normal->init_termios.c_cflag	= B9600 | CS8 | CREAD | HUPCL |
 		CLOCAL;
 	isicom_normal->flags			= TTY_DRIVER_REAL_RAW |
-		TTY_DRIVER_DYNAMIC_DEV;
+		TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK;
 	tty_set_operations(isicom_normal, &isicom_ops);
 
 	retval = tty_register_driver(isicom_normal);
-- 
cgit v1.2.3


From 781cff5cb2bc8d714270accf88db23a855de9816 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:18:30 +0100
Subject: riscom8: Restore driver using new break functionality

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/Kconfig   |  2 +-
 drivers/char/riscom8.c | 27 +++++++++------------------
 2 files changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index d3f8f0e7a5a..224bc0a2290 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -275,7 +275,7 @@ config N_HDLC
 
 config RISCOM8
 	tristate "SDL RISCom/8 card support"
-	depends on SERIAL_NONSTANDARD && BROKEN
+	depends on SERIAL_NONSTANDARD
 	help
 	  This is a driver for the SDL Communications RISCom/8 multiport card,
 	  which gives you many serial ports. You would need something like
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 724b2b20f4b..2c6c8f33d6b 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -1250,11 +1250,15 @@ static int rc_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-static void rc_send_break(struct riscom_port *port, unsigned long length)
+static int rc_send_break(struct tty_struct *tty, int length)
 {
+	struct riscom_port *port = (struct riscom_port *)tty->driver_data;
 	struct riscom_board *bp = port_Board(port);
 	unsigned long flags;
 
+	if (length == 0 || length == -1)
+		return -EOPNOTSUPP;
+
 	spin_lock_irqsave(&riscom_lock, flags);
 
 	port->break_length = RISCOM_TPS / HZ * length;
@@ -1268,6 +1272,7 @@ static void rc_send_break(struct riscom_port *port, unsigned long length)
 	rc_wait_CCR(bp);
 
 	spin_unlock_irqrestore(&riscom_lock, flags);
+	return 0;
 }
 
 static int rc_set_serial_info(struct riscom_port *port,
@@ -1342,27 +1347,12 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp,
 {
 	struct riscom_port *port = (struct riscom_port *)tty->driver_data;
 	void __user *argp = (void __user *)arg;
-	int retval = 0;
+	int retval;
 
 	if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
 		return -ENODEV;
 
 	switch (cmd) {
-	case TCSBRK:	/* SVID version: non-zero arg --> no break */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		if (!arg)
-			rc_send_break(port, HZ/4);	/* 1/4 second */
-		break;
-	case TCSBRKP:	/* support for POSIX tcsendbreak() */
-		retval = tty_check_change(tty);
-		if (retval)
-			return retval;
-		tty_wait_until_sent(tty, 0);
-		rc_send_break(port, arg ? arg*(HZ/10) : HZ/4);
-		break;
 	case TIOCGSERIAL:
 		lock_kernel();
 		retval = rc_get_serial_info(port, argp);
@@ -1517,6 +1507,7 @@ static const struct tty_operations riscom_ops = {
 	.hangup = rc_hangup,
 	.tiocmget = rc_tiocmget,
 	.tiocmset = rc_tiocmset,
+	.break_ctl = rc_send_break,
 };
 
 static int __init rc_init_drivers(void)
@@ -1538,7 +1529,7 @@ static int __init rc_init_drivers(void)
 		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 	riscom_driver->init_termios.c_ispeed = 9600;
 	riscom_driver->init_termios.c_ospeed = 9600;
-	riscom_driver->flags = TTY_DRIVER_REAL_RAW;
+	riscom_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK;
 	tty_set_operations(riscom_driver, &riscom_ops);
 	error = tty_register_driver(riscom_driver);
 	if (error != 0) {
-- 
cgit v1.2.3


From 4a56122297ac7a4a3bf09fb66c0a365a13abe707 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 22 Jul 2008 11:18:43 +0100
Subject: Fix the (i)Stallion driver's putchar() and break_ctl() ops

Fix the Stallion driver's putchar() and break_ctl() ops and iStallion's
putchar() to return values.

Is it actually possible for putchar() or break_ctl() to be called with tty ==
NULL or can the check be discarded?

Should stl_write() be returning 0 if tty->driver_data is NULL or tx.buf is
NULL?  Is this even possible?

I've made Stallion's functions return -EINVAL as stli_breakctl() if the checks
fail.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/stallion.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 0243efb0be9..de5a725c3cc 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -1025,7 +1025,7 @@ static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count
 
 /*****************************************************************************/
 
-static void stl_putchar(struct tty_struct *tty, unsigned char ch)
+static int stl_putchar(struct tty_struct *tty, unsigned char ch)
 {
 	struct stlport	*portp;
 	unsigned int	len;
@@ -1034,12 +1034,12 @@ static void stl_putchar(struct tty_struct *tty, unsigned char ch)
 	pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch);
 
 	if (tty == NULL)
-		return;
+		return -EINVAL;
 	portp = tty->driver_data;
 	if (portp == NULL)
-		return;
+		return -EINVAL;
 	if (portp->tx.buf == NULL)
-		return;
+		return -EINVAL;
 
 	head = portp->tx.head;
 	tail = portp->tx.tail;
@@ -1053,6 +1053,7 @@ static void stl_putchar(struct tty_struct *tty, unsigned char ch)
 			head = portp->tx.buf;
 	}	
 	portp->tx.head = head;
+	return 0;
 }
 
 /*****************************************************************************/
@@ -1460,19 +1461,20 @@ static void stl_hangup(struct tty_struct *tty)
 
 /*****************************************************************************/
 
-static void stl_breakctl(struct tty_struct *tty, int state)
+static int stl_breakctl(struct tty_struct *tty, int state)
 {
 	struct stlport	*portp;
 
 	pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state);
 
 	if (tty == NULL)
-		return;
+		return -EINVAL;
 	portp = tty->driver_data;
 	if (portp == NULL)
-		return;
+		return -EINVAL;
 
 	stl_sendbreak(portp, ((state == -1) ? 1 : 2));
+	return 0;
 }
 
 /*****************************************************************************/
-- 
cgit v1.2.3


From faa7612c09ae4519ad4659c8417aaaba81183833 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 11:19:05 +0100
Subject: specialix: restore driver using new break functionality

Use the hardware break support on the specialix driver

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/Kconfig     |  2 +-
 drivers/char/specialix.c | 38 +++++++++++---------------------------
 2 files changed, 12 insertions(+), 28 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 224bc0a2290..e0bbbfb6a36 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -288,7 +288,7 @@ config RISCOM8
 
 config SPECIALIX
 	tristate "Specialix IO8+ card support"
-	depends on SERIAL_NONSTANDARD && BROKEN
+	depends on SERIAL_NONSTANDARD
 	help
 	  This is a driver for the Specialix IO8+ multiport card (both the
 	  ISA and the PCI version) which gives you many serial ports. You
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index f3184a8a75d..242fd46fda2 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -1818,13 +1818,15 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 
-static void sx_send_break(struct specialix_port *port,
-						unsigned long length)
+static int sx_send_break(struct tty_struct *tty, int length)
 {
+	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
 	struct specialix_board *bp = port_Board(port);
 	unsigned long flags;
 
 	func_enter();
+	if (length == 0 || length == -1)
+		return -EOPNOTSUPP;
 
 	spin_lock_irqsave(&port->lock, flags);
 	port->break_length = SPECIALIX_TPS / HZ * length;
@@ -1843,6 +1845,7 @@ static void sx_send_break(struct specialix_port *port,
 	sx_wait_CCR(bp);
 
 	func_exit();
+	return 0;
 }
 
 
@@ -1929,7 +1932,6 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp,
 				unsigned int cmd, unsigned long arg)
 {
 	struct specialix_port *port = (struct specialix_port *)tty->driver_data;
-	int retval;
 	void __user *argp = (void __user *)arg;
 
 	func_enter();
@@ -1940,34 +1942,14 @@ static int sx_ioctl(struct tty_struct *tty, struct file *filp,
 	}
 
 	switch (cmd) {
-	case TCSBRK:	/* SVID version: non-zero arg --> no break */
-		retval = tty_check_change(tty);
-		if (retval) {
-			func_exit();
-			return retval;
-		}
-		tty_wait_until_sent(tty, 0);
-		if (!arg)
-			sx_send_break(port, HZ/4);	/* 1/4 second */
-		return 0;
-	case TCSBRKP:	/* support for POSIX tcsendbreak() */
-		retval = tty_check_change(tty);
-		if (retval) {
-			func_exit();
-			return retval;
-		}
-		tty_wait_until_sent(tty, 0);
-		sx_send_break(port, arg ? arg*(HZ/10) : HZ/4);
-		func_exit();
-		return 0;
 	case TIOCGSERIAL:
-		 func_exit();
+		func_exit();
 		return sx_get_serial_info(port, argp);
 	case TIOCSSERIAL:
-		 func_exit();
+		func_exit();
 		return sx_set_serial_info(port, argp);
 	default:
-		 func_exit();
+		func_exit();
 		return -ENOIOCTLCMD;
 	}
 	func_exit();
@@ -2190,6 +2172,7 @@ static const struct tty_operations sx_ops = {
 	.hangup = sx_hangup,
 	.tiocmget = sx_tiocmget,
 	.tiocmset = sx_tiocmset,
+	.break_ctl = sx_send_break,
 };
 
 static int sx_init_drivers(void)
@@ -2216,7 +2199,8 @@ static int sx_init_drivers(void)
 		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 	specialix_driver->init_termios.c_ispeed = 9600;
 	specialix_driver->init_termios.c_ospeed = 9600;
-	specialix_driver->flags = TTY_DRIVER_REAL_RAW;
+	specialix_driver->flags = TTY_DRIVER_REAL_RAW |
+						TTY_DRIVER_HARDWARE_BREAK;
 	tty_set_operations(specialix_driver, &sx_ops);
 
 	error = tty_register_driver(specialix_driver);
-- 
cgit v1.2.3


From e129deff3d979df1ad3d0a6756c90932c0a0a102 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Tue, 22 Jul 2008 11:20:34 +0100
Subject: Char: mxser, add CP-102UF support

Add support for CP-102UF moxa card (update to 1.12 original driver) and
increment this driver version.

(Somewhat reworked by alan@redhat.com to merge in with other patches)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mxser.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index f04c3c58a05..4c756bbba94 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -47,7 +47,7 @@
 
 #include "mxser.h"
 
-#define	MXSER_VERSION	"2.0.3"		/* 1.11 */
+#define	MXSER_VERSION	"2.0.4"		/* 1.12 */
 #define	MXSERMAJOR	 174
 #define	MXSERCUMAJOR	 175
 
@@ -71,12 +71,13 @@
 #define UART_MCR_AFE		0x20
 #define UART_LSR_SPECIAL	0x1E
 
+#define PCI_DEVICE_ID_POS104UL	0x1044
 #define PCI_DEVICE_ID_CB108	0x1080
+#define PCI_DEVICE_ID_CP102UF	0x1023
 #define PCI_DEVICE_ID_CB114	0x1142
 #define PCI_DEVICE_ID_CP114UL	0x1143
 #define PCI_DEVICE_ID_CB134I	0x1341
 #define PCI_DEVICE_ID_CP138U	0x1380
-#define PCI_DEVICE_ID_POS104UL	0x1044
 
 
 #define C168_ASIC_ID    1
@@ -142,7 +143,8 @@ static const struct mxser_cardinfo mxser_cards[] = {
 	{ "CB-134I series",	4, },
 	{ "CP-138U series",	8, },
 	{ "POS-104UL series",	4, },
-	{ "CP-114UL series",	4, }
+	{ "CP-114UL series",	4, },
+/*30*/	{ "CP-102UF series",	2, }
 };
 
 /* driver_data correspond to the lines in the structure above
@@ -172,6 +174,7 @@ static struct pci_device_id mxser_pcibrds[] = {
 	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U),	.driver_data = 27 },
 	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL),	.driver_data = 28 },
 	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL),	.driver_data = 29 },
+	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF),	.driver_data = 30 },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
@@ -1414,7 +1417,6 @@ static int mxser_set_serial_info(struct mxser_port *info,
 		info->port.closing_wait = new_serial.closing_wait * HZ / 100;
 		info->port.tty->low_latency =
 				(info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-		info->port.tty->low_latency = 0;
 		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
 				(new_serial.baud_base != info->baud_base ||
 				new_serial.custom_divisor !=
-- 
cgit v1.2.3


From 88e882497d154dfb7c341902c079c9daeca1626f Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 22 Jul 2008 11:20:45 +0100
Subject: Fix the epca driver to permit epca_setup() to be invoked from the
 kernel cmdline

Fix the epca driver to call epca_setup() if digiepca=xxx is included on the
command line and the epca driver is built in.

epca_setup() used to be called from init/main.c in 2.2 kernels, but somewhere
along the way that call was removed but not replaced.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/epca.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 9d9ae1ca292..456e4ede049 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -186,7 +186,6 @@ static void pc_throttle(struct tty_struct *tty);
 static void pc_unthrottle(struct tty_struct *tty);
 static int pc_send_break(struct tty_struct *tty, int msec);
 static void setup_empty_event(struct tty_struct *tty, struct channel *ch);
-static void epca_setup(char *, int *);
 
 static int pc_write(struct tty_struct *, const unsigned char *, int);
 static int pc_init(void);
@@ -2513,7 +2512,8 @@ static void setup_empty_event(struct tty_struct *tty, struct channel *ch)
 	memoff(ch);
 }
 
-static void epca_setup(char *str, int *ints)
+#ifndef MODULE
+static void __init epca_setup(char *str, int *ints)
 {
 	struct board_info board;
 	int               index, loop, last;
@@ -2767,6 +2767,17 @@ static void epca_setup(char *str, int *ints)
 	num_cards++;
 }
 
+static int __init epca_real_setup(char *str)
+{
+	int ints[11];
+
+	epca_setup(get_options(str, 11, ints), ints);
+	return 1;
+}
+
+__setup("digiepca", epca_real_setup);
+#endif
+
 enum epic_board_types {
 	brd_xr = 0,
 	brd_xem,
-- 
cgit v1.2.3


From 768aec0b5bccbd460bcf6e9131f19b5a26f3862d Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Tue, 22 Jul 2008 11:21:07 +0100
Subject: serial: 8250: fix shared interrupts issues with SMP and RT kernels

With SMP kernels _irqsave spinlock disables only local interrupts, while
the shared serial interrupt could be assigned to the CPU that is not
currently starting up the serial port.

This might cause issues because serial8250_startup() routine issues
IRQ-triggering operations before registering the port in the IRQ chain
(though, this is fine to do and done explicitly because we don't want to
process any interrupts on the port startup).

With RT kernels and preemptable hardirqs, _irqsave spinlock does not
disable local hardirqs, and the bug could be reproduced much easily:

$ cat /dev/ttyS0 &
$ cat /dev/ttyS1
irq 42: nobody cared (try booting with the "irqpoll" option)
Call Trace:
[C0475EB0] [C0008A98] show_stack+0x4c/0x1ac (unreliable)
[C0475EF0] [C004BBD4] __report_bad_irq+0x34/0xb8
[C0475F10] [C004BD38] note_interrupt+0xe0/0x308
[C0475F50] [C004B09C] thread_simple_irq+0xdc/0x104
[C0475F70] [C004B3FC] do_irqd+0x338/0x3c8
[C0475FC0] [C00398E0] kthread+0xf8/0x100
[C0475FF0] [C0011FE0] original_kernel_thread+0x44/0x60
handlers:
[<c02112c4>] (serial8250_interrupt+0x0/0x138)
Disabling IRQ #42

After this, all serial ports on the given IRQ are non-functional.

To fix the issue we should explicitly disable shared IRQ before
issuing any IRQ-triggering operations.

I also changed spin_lock_irqsave to the ordinary spin_lock, since it
seems to be safe: chain does not contain new port (yet), thus nobody
will interfere us from the ISRs.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index ce948b66bbd..27f34a9f9cb 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1874,7 +1874,9 @@ static int serial8250_startup(struct uart_port *port)
 		 * the interrupt is enabled.  Delays are necessary to
 		 * allow register changes to become visible.
 		 */
-		spin_lock_irqsave(&up->port.lock, flags);
+		spin_lock(&up->port.lock);
+		if (up->port.flags & UPF_SHARE_IRQ)
+			disable_irq_nosync(up->port.irq);
 
 		wait_for_xmitr(up, UART_LSR_THRE);
 		serial_out_sync(up, UART_IER, UART_IER_THRI);
@@ -1886,7 +1888,9 @@ static int serial8250_startup(struct uart_port *port)
 		iir = serial_in(up, UART_IIR);
 		serial_out(up, UART_IER, 0);
 
-		spin_unlock_irqrestore(&up->port.lock, flags);
+		if (up->port.flags & UPF_SHARE_IRQ)
+			enable_irq(up->port.irq);
+		spin_unlock(&up->port.lock);
 
 		/*
 		 * If the interrupt is not reasserted, setup a timer to
-- 
cgit v1.2.3


From c72f527c104cae8e767e714574238b5550879e0c Mon Sep 17 00:00:00 2001
From: Paul Fulghum <paulkf@microgate.com>
Date: Tue, 22 Jul 2008 11:21:19 +0100
Subject: n_hdlc: honor O_NONBLOCK on write

Make n_hdlc line discipline honor the O_NONBLOCK file flag on write.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/n_hdlc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index ed4e03333ab..69ec6399c71 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -677,6 +677,10 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
 	/* Allocate transmit buffer */
 	/* sleep until transmit buffer available */		
 	while (!(tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list))) {
+		if (file->f_flags & O_NONBLOCK) {
+			error = -EAGAIN;
+			break;
+		}
 		schedule();
 			
 		n_hdlc = tty2n_hdlc (tty);
-- 
cgit v1.2.3


From 8a38c2851d6950502252982af712ac65ef6784ed Mon Sep 17 00:00:00 2001
From: Paul Fulghum <paulkf@microgate.com>
Date: Tue, 22 Jul 2008 11:21:28 +0100
Subject: synclink_gt: improve and simplify write method

Improve write method by allowing multiple HDLC frames to be loaded into tx
DMA buffer ring for continuous frame transmission.  This simplifies the
transmit code by using the common procedures for all serial protocols.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/synclink_gt.c | 38 +++++++++++---------------------------
 1 file changed, 11 insertions(+), 27 deletions(-)

diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index cf87bb89a77..0e59cf54ada 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -849,6 +849,7 @@ static int write(struct tty_struct *tty,
 	int ret = 0;
 	struct slgt_info *info = tty->driver_data;
 	unsigned long flags;
+	unsigned int bufs_needed;
 
 	if (sanity_check(info, tty->name, "write"))
 		goto cleanup;
@@ -865,25 +866,16 @@ static int write(struct tty_struct *tty,
 	if (!count)
 		goto cleanup;
 
-	if (info->params.mode == MGSL_MODE_RAW ||
-	    info->params.mode == MGSL_MODE_MONOSYNC ||
-	    info->params.mode == MGSL_MODE_BISYNC) {
-		unsigned int bufs_needed = (count/DMABUFSIZE);
-		unsigned int bufs_free = free_tbuf_count(info);
-		if (count % DMABUFSIZE)
-			++bufs_needed;
-		if (bufs_needed > bufs_free)
-			goto cleanup;
-	} else {
-		if (info->tx_active)
-			goto cleanup;
-		if (info->tx_count) {
-			/* send accumulated data from send_char() calls */
-			/* as frame and wait before accepting more data. */
-			tx_load(info, info->tx_buf, info->tx_count);
-			goto start;
-		}
+	if (!info->tx_active && info->tx_count) {
+		/* send accumulated data from send_char() */
+		tx_load(info, info->tx_buf, info->tx_count);
+		goto start;
 	}
+	bufs_needed = (count/DMABUFSIZE);
+	if (count % DMABUFSIZE)
+		++bufs_needed;
+	if (bufs_needed > free_tbuf_count(info))
+		goto cleanup;
 
 	ret = info->tx_count = count;
 	tx_load(info, buf, count);
@@ -3935,15 +3927,7 @@ static void tdma_start(struct slgt_info *info)
 
 	/* set 1st descriptor address */
 	wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
-	switch(info->params.mode) {
-	case MGSL_MODE_RAW:
-	case MGSL_MODE_MONOSYNC:
-	case MGSL_MODE_BISYNC:
-		wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
-		break;
-	default:
-		wr_reg32(info, TDCSR, BIT0); /* DMA enable */
-	}
+	wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
 }
 
 static void tx_stop(struct slgt_info *info)
-- 
cgit v1.2.3


From e5590717afd5fb6f494323206a1a35ea25610c2d Mon Sep 17 00:00:00 2001
From: Paul Fulghum <paulkf@microgate.com>
Date: Tue, 22 Jul 2008 11:21:39 +0100
Subject: synclink_gt: add serial bit order control

Add control of hardware serial bit order between LSB first
(default/standard) and MSB first.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/synclink_gt.c | 2 ++
 include/linux/synclink.h   | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 0e59cf54ada..3cfc9e1f888 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -4403,6 +4403,8 @@ static void msc_set_vcr(struct slgt_info *info)
 		break;
 	}
 
+	if (info->if_mode & MGSL_INTERFACE_MSB_FIRST)
+		val |= BIT4;
 	if (info->signals & SerialSignal_DTR)
 		val |= BIT3;
 	if (info->signals & SerialSignal_RTS)
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
index 45f6bc82d31..c844a229acc 100644
--- a/include/linux/synclink.h
+++ b/include/linux/synclink.h
@@ -136,6 +136,7 @@
 #define MGSL_INTERFACE_RTS_EN   0x10
 #define MGSL_INTERFACE_LL       0x20
 #define MGSL_INTERFACE_RL       0x40
+#define MGSL_INTERFACE_MSB_FIRST 0x80
 
 typedef struct _MGSL_PARAMS
 {
-- 
cgit v1.2.3


From 403214d0ad9b2b9e46c89a5b4b513c910c89068d Mon Sep 17 00:00:00 2001
From: Paul Fulghum <paulkf@microgate.com>
Date: Tue, 22 Jul 2008 11:21:55 +0100
Subject: synclink_gt: improve TIOCOUTQ accuracy

Improve the accuracy of TIOCOUTQ value as implemented in chars_in_buffer()
method by walking and counting tx DMA buffers, reading controller tx FIFO
level and accounting for controller tx shift register.  The greatly
improves application control of transmit latency at lower data rates.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/synclink_gt.c | 59 ++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 57 insertions(+), 2 deletions(-)

diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 3cfc9e1f888..8511e2e43c1 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -214,6 +214,7 @@ struct slgt_desc
 	char *buf;          /* virtual  address of data buffer */
     	unsigned int pdesc; /* physical address of this descriptor */
 	dma_addr_t buf_dma_addr;
+	unsigned short buf_count;
 };
 
 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
@@ -466,6 +467,7 @@ static void tx_start(struct slgt_info *info);
 static void tx_stop(struct slgt_info *info);
 static void tx_set_idle(struct slgt_info *info);
 static unsigned int free_tbuf_count(struct slgt_info *info);
+static unsigned int tbuf_bytes(struct slgt_info *info);
 static void reset_tbufs(struct slgt_info *info);
 static void tdma_reset(struct slgt_info *info);
 static void tdma_start(struct slgt_info *info);
@@ -1388,10 +1390,12 @@ done:
 static int chars_in_buffer(struct tty_struct *tty)
 {
 	struct slgt_info *info = tty->driver_data;
+	int count;
 	if (sanity_check(info, tty->name, "chars_in_buffer"))
 		return 0;
-	DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, info->tx_count));
-	return info->tx_count;
+	count = tbuf_bytes(info);
+	DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count));
+	return count;
 }
 
 /*
@@ -4670,6 +4674,56 @@ static unsigned int free_tbuf_count(struct slgt_info *info)
 	return count;
 }
 
+/*
+ * return number of bytes in unsent transmit DMA buffers
+ * and the serial controller tx FIFO
+ */
+static unsigned int tbuf_bytes(struct slgt_info *info)
+{
+	unsigned int total_count = 0;
+	unsigned int i = info->tbuf_current;
+	unsigned int reg_value;
+	unsigned int count;
+	unsigned int active_buf_count = 0;
+
+	/*
+	 * Add descriptor counts for all tx DMA buffers.
+	 * If count is zero (cleared by DMA controller after read),
+	 * the buffer is complete or is actively being read from.
+	 *
+	 * Record buf_count of last buffer with zero count starting
+	 * from current ring position. buf_count is mirror
+	 * copy of count and is not cleared by serial controller.
+	 * If DMA controller is active, that buffer is actively
+	 * being read so add to total.
+	 */
+	do {
+		count = desc_count(info->tbufs[i]);
+		if (count)
+			total_count += count;
+		else if (!total_count)
+			active_buf_count = info->tbufs[i].buf_count;
+		if (++i == info->tbuf_count)
+			i = 0;
+	} while (i != info->tbuf_current);
+
+	/* read tx DMA status register */
+	reg_value = rd_reg32(info, TDCSR);
+
+	/* if tx DMA active, last zero count buffer is in use */
+	if (reg_value & BIT0)
+		total_count += active_buf_count;
+
+	/* add tx FIFO count = reg_value[15..8] */
+	total_count += (reg_value >> 8) & 0xff;
+
+	/* if transmitter active add one byte for shift register */
+	if (info->tx_active)
+		total_count++;
+
+	return total_count;
+}
+
 /*
  * load transmit DMA buffer(s) with data
  */
@@ -4708,6 +4762,7 @@ static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
 			set_desc_eof(*d, 0);
 
 		set_desc_count(*d, count);
+		d->buf_count = count;
 	}
 
 	info->tbuf_current = i;
-- 
cgit v1.2.3


From 993456cdc853a52e1042ebf93fc6e1a12d1216f7 Mon Sep 17 00:00:00 2001
From: Paul Fulghum <paulkf@microgate.com>
Date: Tue, 22 Jul 2008 11:22:04 +0100
Subject: synclink_gt: leave transmitter in reset state after configuration

Leave the transmitter in reset state after configuration so that transmit
signal is held at mark until transmitter is explicitly enabled by
application, otherwise transmitter sends idle pattern.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/synclink_gt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 8511e2e43c1..c8bc69c97d1 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -4134,7 +4134,7 @@ static void sync_mode(struct slgt_info *info)
 	 * 01      enable
 	 * 00      auto-CTS enable
 	 */
-	val = 0;
+	val = BIT2;
 
 	switch(info->params.mode) {
 	case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
-- 
cgit v1.2.3


From 814dae031d08d40d34c0403a54d6e659baf0ae71 Mon Sep 17 00:00:00 2001
From: Paul Fulghum <paulkf@microgate.com>
Date: Tue, 22 Jul 2008 11:22:14 +0100
Subject: synclink_gt: add rx DMA buffer fill level control

Add run time control for receive DMA buffer fill level to allow
application to control receive latency when using stream oriented serial
protocols that pass receive data to application only after a DMA buffer
fills.  This was previously a compile time option, but run time control is
needed when application changes data rate (and latency requirements) or
uses different data rates on different ports.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/synclink_gt.c | 42 +++++++++++++++++++++++++++---------------
 1 file changed, 27 insertions(+), 15 deletions(-)

diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index c8bc69c97d1..5ffdb364ea4 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -303,7 +303,7 @@ struct slgt_info {
 	u32 idle_mode;
 	u32 max_frame_size;       /* as set by device config */
 
-	unsigned int raw_rx_size;
+	unsigned int rbuf_fill_level;
 	unsigned int if_mode;
 
 	/* device status */
@@ -2676,8 +2676,29 @@ static int tx_abort(struct slgt_info *info)
 static int rx_enable(struct slgt_info *info, int enable)
 {
  	unsigned long flags;
-	DBGINFO(("%s rx_enable(%d)\n", info->device_name, enable));
+	unsigned int rbuf_fill_level;
+	DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable));
 	spin_lock_irqsave(&info->lock,flags);
+	/*
+	 * enable[31..16] = receive DMA buffer fill level
+	 * 0 = noop (leave fill level unchanged)
+	 * fill level must be multiple of 4 and <= buffer size
+	 */
+	rbuf_fill_level = ((unsigned int)enable) >> 16;
+	if (rbuf_fill_level) {
+		if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4))
+			return -EINVAL;
+		info->rbuf_fill_level = rbuf_fill_level;
+		rx_stop(info); /* restart receiver to use new fill level */
+	}
+
+	/*
+	 * enable[1..0] = receiver enable command
+	 * 0 = disable
+	 * 1 = enable
+	 * 2 = enable or force hunt mode if already enabled
+	 */
+	enable &= 3;
 	if (enable) {
 		if (!info->rx_enabled)
 			rx_start(info);
@@ -3444,7 +3465,7 @@ static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev
 		info->magic = MGSL_MAGIC;
 		INIT_WORK(&info->task, bh_handler);
 		info->max_frame_size = 4096;
-		info->raw_rx_size = DMABUFSIZE;
+		info->rbuf_fill_level = DMABUFSIZE;
 		info->port.close_delay = 5*HZ/10;
 		info->port.closing_wait = 30*HZ;
 		init_waitqueue_head(&info->status_event_wait_q);
@@ -4447,16 +4468,7 @@ static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last
 	while(!done) {
 		/* reset current buffer for reuse */
 		info->rbufs[i].status = 0;
-		switch(info->params.mode) {
-		case MGSL_MODE_RAW:
-		case MGSL_MODE_MONOSYNC:
-		case MGSL_MODE_BISYNC:
-			set_desc_count(info->rbufs[i], info->raw_rx_size);
-			break;
-		default:
-			set_desc_count(info->rbufs[i], DMABUFSIZE);
-		}
-
+		set_desc_count(info->rbufs[i], info->rbuf_fill_level);
 		if (i == last)
 			done = 1;
 		if (++i == info->rbuf_count)
@@ -4563,7 +4575,7 @@ check_again:
 
 	DBGBH(("%s rx frame status=%04X size=%d\n",
 		info->device_name, status, framesize));
-	DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, DMABUFSIZE), "rx");
+	DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx");
 
 	if (framesize) {
 		if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
@@ -4583,7 +4595,7 @@ check_again:
 			info->icount.rxok++;
 
 			while(copy_count) {
-				int partial_count = min(copy_count, DMABUFSIZE);
+				int partial_count = min_t(int, copy_count, info->rbuf_fill_level);
 				memcpy(p, info->rbufs[i].buf, partial_count);
 				p += partial_count;
 				copy_count -= partial_count;
-- 
cgit v1.2.3


From c68a99cda87a8356ea0e56cc5111043ac8402ffd Mon Sep 17 00:00:00 2001
From: Paul Fulghum <paulkf@microgate.com>
Date: Tue, 22 Jul 2008 11:23:24 +0100
Subject: synclink_gt fix locking in error path of rx enable

Fix locking in error path of rx_enable() introduced by
synclink_gt-add-rx-dma-buffer-fill-level-control patch.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/synclink_gt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 5ffdb364ea4..3e9058993e4 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -2686,8 +2686,10 @@ static int rx_enable(struct slgt_info *info, int enable)
 	 */
 	rbuf_fill_level = ((unsigned int)enable) >> 16;
 	if (rbuf_fill_level) {
-		if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4))
+		if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) {
+			spin_unlock_irqrestore(&info->lock, flags);
 			return -EINVAL;
+		}
 		info->rbuf_fill_level = rbuf_fill_level;
 		rx_stop(info); /* restart receiver to use new fill level */
 	}
-- 
cgit v1.2.3


From ed569bfb8e5d0725db11018130e44eb567d829c1 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 13:44:14 +0100
Subject: istallion: Use helpers

The ldisc needs to be referenced properly when used. The tty layer has a
helper for this which should have been used but this driver got missed
originally.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/istallion.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 63d22b5ebc0..f9ebcd41d8e 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -925,8 +925,7 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
 	clear_bit(ST_TXBUSY, &portp->state);
 	clear_bit(ST_RXSTOP, &portp->state);
 	set_bit(TTY_IO_ERROR, &tty->flags);
-	if (tty->ldisc.ops->flush_buffer)
-		(tty->ldisc.ops->flush_buffer)(tty);
+	tty_ldisc_flush(tty);
 	set_bit(ST_DOFLUSHRX, &portp->state);
 	stli_flushbuffer(tty);
 
-- 
cgit v1.2.3


From f10140fbe5f97ecfeda986a12d0f1bad75642779 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 15:25:07 +0100
Subject: port_fixups: Fix ups for tty port changes

I missed the cpm_uart one. Thanks to Kumar Gala for reporting it. A double
check found samsung also needed fixing up.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/cpm_uart/cpm_uart_core.c | 2 +-
 drivers/serial/samsung.c                | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index abe129cc927..93e407ee08b 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -209,7 +209,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
 	int i;
 	unsigned char ch;
 	u8 *cp;
-	struct tty_struct *tty = port->info->tty;
+	struct tty_struct *tty = port->info->port.tty;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 	cbd_t __iomem *bdp;
 	u16 status;
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 4a3ecaa629e..d852f83f890 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -202,7 +202,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
 {
 	struct s3c24xx_uart_port *ourport = dev_id;
 	struct uart_port *port = &ourport->port;
-	struct tty_struct *tty = port->info->tty;
+	struct tty_struct *tty = port->info->port.tty;
 	unsigned int ufcon, ch, flag, ufstat, uerstat;
 	int max_count = 64;
 
-- 
cgit v1.2.3


From 217d5a51953143046cf2972eebdefe2b2db05718 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurentp@cse-semaphore.com>
Date: Tue, 22 Jul 2008 17:43:42 +0200
Subject: fs_enet: Remove unused fields in the fs_mii_bb_platform_info
 structure.

The mdio_port, mdio_bit, mdc_port and mdc_bit fields in the
fs_mii_bb_platform_info structure are left-overs from the move to the Phy
Abstraction Layer subsystem. They are not used anymore and can be safely
removed.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 include/linux/fs_enet_pd.h | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 9bc045b8c47..decc4b56ccf 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -103,10 +103,6 @@ struct fs_mii_bb_platform_info {
 	struct fs_mii_bit 	mdio_dir;
 	struct fs_mii_bit 	mdio_dat;
 	struct fs_mii_bit	mdc_dat;
-	int mdio_port;	/* port & bit for MDIO */
-	int mdio_bit;
-	int mdc_port;	/* port & bit for MDC  */
-	int mdc_bit;
 	int delay;	/* delay in us         */
 	int irq[32]; 	/* irqs per phy's */
 };
-- 
cgit v1.2.3


From 2b4ff112a0b3fe90de561a77f2e66000c028ca54 Mon Sep 17 00:00:00 2001
From: "frank.blaschka@de.ibm.com" <frank.blaschka@de.ibm.com>
Date: Tue, 22 Jul 2008 09:39:25 +0200
Subject: qeth: fix build error caused by VLAN changes

Adrian Bunk reports this build error:

CC      drivers/s390/net/qeth_l3_main.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/s390/net/qeth_l3_main.c:
In function 'qeth_l3_hard_start_xmit':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/s390/net/qeth_l3_main.c:
2654: error: implicit declaration of function 'VLAN_TX_SKB_CB'
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/s390/net/qeth_l3_main.c:
2654: error: invalid type argument of '->' (have 'int')
make[3]: *** [drivers/s390/net/qeth_l3_main.o] Error 1

The intention of the driver appears to be to invalidate the VLAN tag.
Change it to set skb->vlan_tci to zero, which has the same effect.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/qeth_l3_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index b29afef5c7f..38de31b5570 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2651,7 +2651,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			tag = (u16 *)(new_skb->data + 12);
 			*tag = __constant_htons(ETH_P_8021Q);
 			*(tag + 1) = htons(vlan_tx_tag_get(new_skb));
-			VLAN_TX_SKB_CB(new_skb)->magic = 0;
+			new_skb->vlan_tci = 0;
 		}
 	}
 
-- 
cgit v1.2.3


From b57f9cae8724e4822fedfcc12530f868dcf6ea94 Mon Sep 17 00:00:00 2001
From: Wang Chen <wangchen@cn.fujitsu.com>
Date: Tue, 22 Jul 2008 13:13:18 +0800
Subject: de4x5: Remove developer debug feature about set/clear promisc

IFF_PROMISC flag shouldn't be set or cleared by drivers, because
whether device be promisc mode is decided by how many upper layer
callers being referenced to it.
And the promisc changing feature of de4x5 ioctl is developer debug
feature, we can remove it now.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/tulip/de4x5.c | 16 ----------------
 drivers/net/tulip/de4x5.h |  3 +--
 2 files changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index bc30c6e8fea..617ef41bdfe 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -5514,22 +5514,6 @@ de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	netif_wake_queue(dev);                      /* Unlock the TX ring */
 	break;
 
-    case DE4X5_SET_PROM:             /* Set Promiscuous Mode */
-	if (!capable(CAP_NET_ADMIN)) return -EPERM;
-	omr = inl(DE4X5_OMR);
-	omr |= OMR_PR;
-	outl(omr, DE4X5_OMR);
-	dev->flags |= IFF_PROMISC;
-	break;
-
-    case DE4X5_CLR_PROM:             /* Clear Promiscuous Mode */
-	if (!capable(CAP_NET_ADMIN)) return -EPERM;
-	omr = inl(DE4X5_OMR);
-	omr &= ~OMR_PR;
-	outl(omr, DE4X5_OMR);
-	dev->flags &= ~IFF_PROMISC;
-	break;
-
     case DE4X5_SAY_BOO:              /* Say "Boo!" to the kernel log file */
 	if (!capable(CAP_NET_ADMIN)) return -EPERM;
 	printk("%s: Boo!\n", dev->name);
diff --git a/drivers/net/tulip/de4x5.h b/drivers/net/tulip/de4x5.h
index f5f33b3eb06..9f2877438fb 100644
--- a/drivers/net/tulip/de4x5.h
+++ b/drivers/net/tulip/de4x5.h
@@ -1004,8 +1004,7 @@ struct de4x5_ioctl {
 */
 #define DE4X5_GET_HWADDR	0x01 /* Get the hardware address */
 #define DE4X5_SET_HWADDR	0x02 /* Set the hardware address */
-#define DE4X5_SET_PROM  	0x03 /* Set Promiscuous Mode */
-#define DE4X5_CLR_PROM  	0x04 /* Clear Promiscuous Mode */
+/* 0x03 and 0x04 were used before and are obsoleted now. Don't use them. */
 #define DE4X5_SAY_BOO	        0x05 /* Say "Boo!" to the kernel log file */
 #define DE4X5_GET_MCA   	0x06 /* Get a multicast address */
 #define DE4X5_SET_MCA   	0x07 /* Set a multicast address */
-- 
cgit v1.2.3


From e454e7e2e3afbcdc002ed55a087a14e8b057519d Mon Sep 17 00:00:00 2001
From: Brice Goglin <brice@myri.com>
Date: Mon, 21 Jul 2008 10:25:50 +0200
Subject: myri10ge: remove wcfifo

Remove the wcfifo since it never gave any performance improvement.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/myri10ge/myri10ge.c | 54 +++--------------------------------------
 1 file changed, 3 insertions(+), 51 deletions(-)

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index b3981ed972b..3305ce3c5b3 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -125,7 +125,6 @@ struct myri10ge_cmd {
 
 struct myri10ge_rx_buf {
 	struct mcp_kreq_ether_recv __iomem *lanai;	/* lanai ptr for recv ring */
-	u8 __iomem *wc_fifo;	/* w/c rx dma addr fifo address */
 	struct mcp_kreq_ether_recv *shadow;	/* host shadow of recv ring */
 	struct myri10ge_rx_buffer_state *info;
 	struct page *page;
@@ -140,7 +139,6 @@ struct myri10ge_rx_buf {
 
 struct myri10ge_tx_buf {
 	struct mcp_kreq_ether_send __iomem *lanai;	/* lanai ptr for sendq */
-	u8 __iomem *wc_fifo;	/* w/c send fifo address */
 	struct mcp_kreq_ether_send *req_list;	/* host shadow of sendq */
 	char *req_bytes;
 	struct myri10ge_tx_buffer_state *info;
@@ -332,10 +330,6 @@ MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
 
 static int myri10ge_reset_recover = 1;
 
-static int myri10ge_wcfifo = 0;
-module_param(myri10ge_wcfifo, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled");
-
 static int myri10ge_max_slices = 1;
 module_param(myri10ge_max_slices, int, S_IRUGO);
 MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
@@ -1218,14 +1212,8 @@ myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
 
 		/* copy 8 descriptors to the firmware at a time */
 		if ((idx & 7) == 7) {
-			if (rx->wc_fifo == NULL)
-				myri10ge_submit_8rx(&rx->lanai[idx - 7],
-						    &rx->shadow[idx - 7]);
-			else {
-				mb();
-				myri10ge_pio_copy(rx->wc_fifo,
-						  &rx->shadow[idx - 7], 64);
-			}
+			myri10ge_submit_8rx(&rx->lanai[idx - 7],
+					    &rx->shadow[idx - 7]);
 		}
 	}
 }
@@ -2229,18 +2217,6 @@ static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
 	ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
 	    (mgp->sram + cmd.data0);
 
-	if (myri10ge_wcfifo && mgp->wc_enabled) {
-		ss->tx.wc_fifo = (u8 __iomem *)
-		    mgp->sram + MXGEFW_ETH_SEND_4 + 64 * slice;
-		ss->rx_small.wc_fifo = (u8 __iomem *)
-		    mgp->sram + MXGEFW_ETH_RECV_SMALL + 64 * slice;
-		ss->rx_big.wc_fifo = (u8 __iomem *)
-		    mgp->sram + MXGEFW_ETH_RECV_BIG + 64 * slice;
-	} else {
-		ss->tx.wc_fifo = NULL;
-		ss->rx_small.wc_fifo = NULL;
-		ss->rx_big.wc_fifo = NULL;
-	}
 	return status;
 
 }
@@ -2573,27 +2549,6 @@ myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
 	mb();
 }
 
-static inline void
-myri10ge_submit_req_wc(struct myri10ge_tx_buf *tx,
-		       struct mcp_kreq_ether_send *src, int cnt)
-{
-	tx->req += cnt;
-	mb();
-	while (cnt >= 4) {
-		myri10ge_pio_copy(tx->wc_fifo, src, 64);
-		mb();
-		src += 4;
-		cnt -= 4;
-	}
-	if (cnt > 0) {
-		/* pad it to 64 bytes.  The src is 64 bytes bigger than it
-		 * needs to be so that we don't overrun it */
-		myri10ge_pio_copy(tx->wc_fifo + MXGEFW_ETH_SEND_OFFSET(cnt),
-				  src, 64);
-		mb();
-	}
-}
-
 /*
  * Transmit a packet.  We need to split the packet so that a single
  * segment does not cross myri10ge->tx_boundary, so this makes segment
@@ -2830,10 +2785,7 @@ again:
 					 MXGEFW_FLAGS_FIRST)));
 	idx = ((count - 1) + tx->req) & tx->mask;
 	tx->info[idx].last = 1;
-	if (tx->wc_fifo == NULL)
-		myri10ge_submit_req(tx, tx->req_list, count);
-	else
-		myri10ge_submit_req_wc(tx, tx->req_list, count);
+	myri10ge_submit_req(tx, tx->req_list, count);
 	tx->pkt_start++;
 	if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
 		tx->stop_queue++;
-- 
cgit v1.2.3


From c7f80993a38f0354a8ad821bcd9335b47a464357 Mon Sep 17 00:00:00 2001
From: Brice Goglin <brice@myri.com>
Date: Mon, 21 Jul 2008 10:26:25 +0200
Subject: myri10ge: use ioremap_wc

Switch to ioremap_wc(). We keep the MTRR code since ioremap_wc()
will use UC_MINUS when falling back to uncachable, and thus let
the MTRR WC take precedence.

Also rename the error path better.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/myri10ge/myri10ge.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 3305ce3c5b3..3ab0e5289f7 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -3720,14 +3720,14 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (mgp->sram_size > mgp->board_span) {
 		dev_err(&pdev->dev, "board span %ld bytes too small\n",
 			mgp->board_span);
-		goto abort_with_wc;
+		goto abort_with_mtrr;
 	}
-	mgp->sram = ioremap(mgp->iomem_base, mgp->board_span);
+	mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
 	if (mgp->sram == NULL) {
 		dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
 			mgp->board_span, mgp->iomem_base);
 		status = -ENXIO;
-		goto abort_with_wc;
+		goto abort_with_mtrr;
 	}
 	memcpy_fromio(mgp->eeprom_strings,
 		      mgp->sram + mgp->sram_size - MYRI10GE_EEPROM_STRINGS_SIZE,
@@ -3828,7 +3828,7 @@ abort_with_firmware:
 abort_with_ioremap:
 	iounmap(mgp->sram);
 
-abort_with_wc:
+abort_with_mtrr:
 #ifdef CONFIG_MTRR
 	if (mgp->mtrr >= 0)
 		mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
-- 
cgit v1.2.3


From d29f749e252bcdbfe7a75a58f0ee92da16f127c0 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Tue, 22 Jul 2008 14:09:06 -0700
Subject: net: Fix build failure with 'make mandocs'.

The function header comments have to go with the functions
they are documenting, or things go horribly wrong when we
try to process them with the docbook tools.

Warning(include/linux/netdevice.h:1006): No description found for parameter 'dev_queue'
Warning(include/linux/netdevice.h:1033): No description found for parameter 'dev_queue'
Warning(include/linux/netdevice.h:1067): No description found for parameter 'dev_queue'
Warning(include/linux/netdevice.h:1093): No description found for parameter 'dev_queue'
Warning(include/linux/netdevice.h:1474): No description found for parameter 'txq'
Error(net/core/dev.c:1674): cannot understand prototype: 'u32 simple_tx_hashrnd; '

Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h | 58 +++++++++++++++++++++++------------------------
 net/core/dev.c            | 51 ++++++++++++++++++++---------------------
 2 files changed, 54 insertions(+), 55 deletions(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index f5ea445f89f..b4d056ceab9 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -996,17 +996,17 @@ static inline void netif_tx_schedule_all(struct net_device *dev)
 		netif_schedule_queue(netdev_get_tx_queue(dev, i));
 }
 
+static inline void netif_tx_start_queue(struct netdev_queue *dev_queue)
+{
+	clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
+}
+
 /**
  *	netif_start_queue - allow transmit
  *	@dev: network device
  *
  *	Allow upper layers to call the device hard_start_xmit routine.
  */
-static inline void netif_tx_start_queue(struct netdev_queue *dev_queue)
-{
-	clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
-}
-
 static inline void netif_start_queue(struct net_device *dev)
 {
 	netif_tx_start_queue(netdev_get_tx_queue(dev, 0));
@@ -1022,13 +1022,6 @@ static inline void netif_tx_start_all_queues(struct net_device *dev)
 	}
 }
 
-/**
- *	netif_wake_queue - restart transmit
- *	@dev: network device
- *
- *	Allow upper layers to call the device hard_start_xmit routine.
- *	Used for flow control when transmit resources are available.
- */
 static inline void netif_tx_wake_queue(struct netdev_queue *dev_queue)
 {
 #ifdef CONFIG_NETPOLL_TRAP
@@ -1041,6 +1034,13 @@ static inline void netif_tx_wake_queue(struct netdev_queue *dev_queue)
 		__netif_schedule(dev_queue->qdisc);
 }
 
+/**
+ *	netif_wake_queue - restart transmit
+ *	@dev: network device
+ *
+ *	Allow upper layers to call the device hard_start_xmit routine.
+ *	Used for flow control when transmit resources are available.
+ */
 static inline void netif_wake_queue(struct net_device *dev)
 {
 	netif_tx_wake_queue(netdev_get_tx_queue(dev, 0));
@@ -1056,6 +1056,11 @@ static inline void netif_tx_wake_all_queues(struct net_device *dev)
 	}
 }
 
+static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue)
+{
+	set_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
+}
+
 /**
  *	netif_stop_queue - stop transmitted packets
  *	@dev: network device
@@ -1063,11 +1068,6 @@ static inline void netif_tx_wake_all_queues(struct net_device *dev)
  *	Stop upper layers calling the device hard_start_xmit routine.
  *	Used for flow control when transmit resources are unavailable.
  */
-static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue)
-{
-	set_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
-}
-
 static inline void netif_stop_queue(struct net_device *dev)
 {
 	netif_tx_stop_queue(netdev_get_tx_queue(dev, 0));
@@ -1083,17 +1083,17 @@ static inline void netif_tx_stop_all_queues(struct net_device *dev)
 	}
 }
 
+static inline int netif_tx_queue_stopped(const struct netdev_queue *dev_queue)
+{
+	return test_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
+}
+
 /**
  *	netif_queue_stopped - test if transmit queue is flowblocked
  *	@dev: network device
  *
  *	Test if transmit queue on device is currently unable to send.
  */
-static inline int netif_tx_queue_stopped(const struct netdev_queue *dev_queue)
-{
-	return test_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
-}
-
 static inline int netif_queue_stopped(const struct net_device *dev)
 {
 	return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0));
@@ -1463,13 +1463,6 @@ static inline void netif_rx_complete(struct net_device *dev,
 	local_irq_restore(flags);
 }
 
-/**
- *	netif_tx_lock - grab network device transmit lock
- *	@dev: network device
- *	@cpu: cpu number of lock owner
- *
- * Get network device transmit lock
- */
 static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
 {
 	spin_lock(&txq->_xmit_lock);
@@ -1482,6 +1475,13 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
 	txq->xmit_lock_owner = smp_processor_id();
 }
 
+/**
+ *	netif_tx_lock - grab network device transmit lock
+ *	@dev: network device
+ *	@cpu: cpu number of lock owner
+ *
+ * Get network device transmit lock
+ */
 static inline void netif_tx_lock(struct net_device *dev)
 {
 	int cpu = smp_processor_id();
diff --git a/net/core/dev.c b/net/core/dev.c
index ad5598d2bb3..65eea83613e 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1645,32 +1645,6 @@ out_kfree_skb:
 	return 0;
 }
 
-/**
- *	dev_queue_xmit - transmit a buffer
- *	@skb: buffer to transmit
- *
- *	Queue a buffer for transmission to a network device. The caller must
- *	have set the device and priority and built the buffer before calling
- *	this function. The function can be called from an interrupt.
- *
- *	A negative errno code is returned on a failure. A success does not
- *	guarantee the frame will be transmitted as it may be dropped due
- *	to congestion or traffic shaping.
- *
- * -----------------------------------------------------------------------------------
- *      I notice this method can also return errors from the queue disciplines,
- *      including NET_XMIT_DROP, which is a positive value.  So, errors can also
- *      be positive.
- *
- *      Regardless of the return value, the skb is consumed, so it is currently
- *      difficult to retry a send to this method.  (You can bump the ref count
- *      before sending to hold a reference for retry if you are careful.)
- *
- *      When calling this method, interrupts MUST be enabled.  This is because
- *      the BH enable code must have IRQs enabled so that it will not deadlock.
- *          --BLG
- */
-
 static u32 simple_tx_hashrnd;
 static int simple_tx_hashrnd_initialized = 0;
 
@@ -1738,6 +1712,31 @@ static struct netdev_queue *dev_pick_tx(struct net_device *dev,
 	return netdev_get_tx_queue(dev, queue_index);
 }
 
+/**
+ *	dev_queue_xmit - transmit a buffer
+ *	@skb: buffer to transmit
+ *
+ *	Queue a buffer for transmission to a network device. The caller must
+ *	have set the device and priority and built the buffer before calling
+ *	this function. The function can be called from an interrupt.
+ *
+ *	A negative errno code is returned on a failure. A success does not
+ *	guarantee the frame will be transmitted as it may be dropped due
+ *	to congestion or traffic shaping.
+ *
+ * -----------------------------------------------------------------------------------
+ *      I notice this method can also return errors from the queue disciplines,
+ *      including NET_XMIT_DROP, which is a positive value.  So, errors can also
+ *      be positive.
+ *
+ *      Regardless of the return value, the skb is consumed, so it is currently
+ *      difficult to retry a send to this method.  (You can bump the ref count
+ *      before sending to hold a reference for retry if you are careful.)
+ *
+ *      When calling this method, interrupts MUST be enabled.  This is because
+ *      the BH enable code must have IRQs enabled so that it will not deadlock.
+ *          --BLG
+ */
 int dev_queue_xmit(struct sk_buff *skb)
 {
 	struct net_device *dev = skb->dev;
-- 
cgit v1.2.3


From f42e86d95fa53d3a62b2795515da18b4f41b0480 Mon Sep 17 00:00:00 2001
From: Yong Wang <yong.y.wang@linux.intel.com>
Date: Tue, 22 Jul 2008 14:14:18 -0700
Subject: PCI/DMAR: don't assume presence of RMRRs

RMRRs do not necessarily have to be present on all VT-d capable platforms.
The printk is just informational and does not need to be followed by an error
return.

Signed-off-by: Yong Y Wang <yong.y.wang@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: mark gross <mgross@linux.intel.com>
Cc: Keshavamurthy, Anil S <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/dmar.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index f941f609dbf..8bf86ae2333 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -317,10 +317,8 @@ int __init dmar_table_init(void)
 		return -ENODEV;
 	}
 
-	if (list_empty(&dmar_rmrr_units)) {
+	if (list_empty(&dmar_rmrr_units))
 		printk(KERN_INFO PREFIX "No RMRR found\n");
-		return -ENODEV;
-	}
 
 	return 0;
 }
-- 
cgit v1.2.3


From dd5bdff83b19d9174126e0398b47117c3a80e22d Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@voltaire.com>
Date: Tue, 22 Jul 2008 14:14:22 -0700
Subject: RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE event

Add an RDMA_CM_EVENT_ADDR_CHANGE event can be used by rdma-cm
consumers that wish to have their RDMA sessions always use the same
links (eg <hca/port>) as the IP stack does.  In the current code, this
does not happen when bonding is used and fail-over happened but the IB
link used by an already existing session is operating fine.

Use the netevent notification for sensing that a change has happened
in the IP stack, then scan the rdma-cm ID list to see if there is an
ID that is "misaligned" with respect to the IP stack, and deliver
RDMA_CM_EVENT_ADDR_CHANGE for this ID.  The consumer can act on the
event or just ignore it.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/core/cma.c | 92 +++++++++++++++++++++++++++++++++++++++++++
 include/rdma/rdma_cm.h        |  3 +-
 2 files changed, 94 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index ae11d5cc74d..79792c92e6f 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -168,6 +168,12 @@ struct cma_work {
 	struct rdma_cm_event	event;
 };
 
+struct cma_ndev_work {
+	struct work_struct	work;
+	struct rdma_id_private	*id;
+	struct rdma_cm_event	event;
+};
+
 union cma_ip_addr {
 	struct in6_addr ip6;
 	struct {
@@ -1598,6 +1604,30 @@ out:
 	kfree(work);
 }
 
+static void cma_ndev_work_handler(struct work_struct *_work)
+{
+	struct cma_ndev_work *work = container_of(_work, struct cma_ndev_work, work);
+	struct rdma_id_private *id_priv = work->id;
+	int destroy = 0;
+
+	mutex_lock(&id_priv->handler_mutex);
+	if (id_priv->state == CMA_DESTROYING ||
+	    id_priv->state == CMA_DEVICE_REMOVAL)
+		goto out;
+
+	if (id_priv->id.event_handler(&id_priv->id, &work->event)) {
+		cma_exch(id_priv, CMA_DESTROYING);
+		destroy = 1;
+	}
+
+out:
+	mutex_unlock(&id_priv->handler_mutex);
+	cma_deref_id(id_priv);
+	if (destroy)
+		rdma_destroy_id(&id_priv->id);
+	kfree(work);
+}
+
 static int cma_resolve_ib_route(struct rdma_id_private *id_priv, int timeout_ms)
 {
 	struct rdma_route *route = &id_priv->id.route;
@@ -2723,6 +2753,65 @@ void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr)
 }
 EXPORT_SYMBOL(rdma_leave_multicast);
 
+static int cma_netdev_change(struct net_device *ndev, struct rdma_id_private *id_priv)
+{
+	struct rdma_dev_addr *dev_addr;
+	struct cma_ndev_work *work;
+
+	dev_addr = &id_priv->id.route.addr.dev_addr;
+
+	if ((dev_addr->src_dev == ndev) &&
+	    memcmp(dev_addr->src_dev_addr, ndev->dev_addr, ndev->addr_len)) {
+		printk(KERN_INFO "RDMA CM addr change for ndev %s used by id %p\n",
+		       ndev->name, &id_priv->id);
+		work = kzalloc(sizeof *work, GFP_KERNEL);
+		if (!work)
+			return -ENOMEM;
+
+		INIT_WORK(&work->work, cma_ndev_work_handler);
+		work->id = id_priv;
+		work->event.event = RDMA_CM_EVENT_ADDR_CHANGE;
+		atomic_inc(&id_priv->refcount);
+		queue_work(cma_wq, &work->work);
+	}
+
+	return 0;
+}
+
+static int cma_netdev_callback(struct notifier_block *self, unsigned long event,
+			       void *ctx)
+{
+	struct net_device *ndev = (struct net_device *)ctx;
+	struct cma_device *cma_dev;
+	struct rdma_id_private *id_priv;
+	int ret = NOTIFY_DONE;
+
+	if (dev_net(ndev) != &init_net)
+		return NOTIFY_DONE;
+
+	if (event != NETDEV_BONDING_FAILOVER)
+		return NOTIFY_DONE;
+
+	if (!(ndev->flags & IFF_MASTER) || !(ndev->priv_flags & IFF_BONDING))
+		return NOTIFY_DONE;
+
+	mutex_lock(&lock);
+	list_for_each_entry(cma_dev, &dev_list, list)
+		list_for_each_entry(id_priv, &cma_dev->id_list, list) {
+			ret = cma_netdev_change(ndev, id_priv);
+			if (ret)
+				goto out;
+		}
+
+out:
+	mutex_unlock(&lock);
+	return ret;
+}
+
+static struct notifier_block cma_nb = {
+	.notifier_call = cma_netdev_callback
+};
+
 static void cma_add_one(struct ib_device *device)
 {
 	struct cma_device *cma_dev;
@@ -2831,6 +2920,7 @@ static int cma_init(void)
 
 	ib_sa_register_client(&sa_client);
 	rdma_addr_register_client(&addr_client);
+	register_netdevice_notifier(&cma_nb);
 
 	ret = ib_register_client(&cma_client);
 	if (ret)
@@ -2838,6 +2928,7 @@ static int cma_init(void)
 	return 0;
 
 err:
+	unregister_netdevice_notifier(&cma_nb);
 	rdma_addr_unregister_client(&addr_client);
 	ib_sa_unregister_client(&sa_client);
 	destroy_workqueue(cma_wq);
@@ -2847,6 +2938,7 @@ err:
 static void cma_cleanup(void)
 {
 	ib_unregister_client(&cma_client);
+	unregister_netdevice_notifier(&cma_nb);
 	rdma_addr_unregister_client(&addr_client);
 	ib_sa_unregister_client(&sa_client);
 	destroy_workqueue(cma_wq);
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index 22bb2e7bab1..001d606517f 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -57,7 +57,8 @@ enum rdma_cm_event_type {
 	RDMA_CM_EVENT_DISCONNECTED,
 	RDMA_CM_EVENT_DEVICE_REMOVAL,
 	RDMA_CM_EVENT_MULTICAST_JOIN,
-	RDMA_CM_EVENT_MULTICAST_ERROR
+	RDMA_CM_EVENT_MULTICAST_ERROR,
+	RDMA_CM_EVENT_ADDR_CHANGE
 };
 
 enum rdma_port_space {
-- 
cgit v1.2.3


From 38ca83a588662f0af684ba2567dd910a564268ab Mon Sep 17 00:00:00 2001
From: Amir Vadai <amirv@mellanox.co.il>
Date: Tue, 22 Jul 2008 14:14:23 -0700
Subject: RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT event

Consumers that want to re-use their QPs in new connections need to
know when the QP has exited the timewait state.  Report the timewait
event through the rdma_cm.

Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/core/cma.c | 7 ++++++-
 include/rdma/rdma_cm.h        | 3 ++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 79792c92e6f..e980ff3335d 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -920,7 +920,10 @@ static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
 	struct rdma_cm_event event;
 	int ret = 0;
 
-	if (cma_disable_callback(id_priv, CMA_CONNECT))
+	if ((ib_event->event != IB_CM_TIMEWAIT_EXIT &&
+		cma_disable_callback(id_priv, CMA_CONNECT)) ||
+	    (ib_event->event == IB_CM_TIMEWAIT_EXIT &&
+		cma_disable_callback(id_priv, CMA_DISCONNECT)))
 		return 0;
 
 	memset(&event, 0, sizeof event);
@@ -956,6 +959,8 @@ static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
 		event.event = RDMA_CM_EVENT_DISCONNECTED;
 		break;
 	case IB_CM_TIMEWAIT_EXIT:
+		event.event = RDMA_CM_EVENT_TIMEWAIT_EXIT;
+		break;
 	case IB_CM_MRA_RECEIVED:
 		/* ignore event */
 		goto out;
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index 001d606517f..df7faf09d66 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -58,7 +58,8 @@ enum rdma_cm_event_type {
 	RDMA_CM_EVENT_DEVICE_REMOVAL,
 	RDMA_CM_EVENT_MULTICAST_JOIN,
 	RDMA_CM_EVENT_MULTICAST_ERROR,
-	RDMA_CM_EVENT_ADDR_CHANGE
+	RDMA_CM_EVENT_ADDR_CHANGE,
+	RDMA_CM_EVENT_TIMEWAIT_EXIT
 };
 
 enum rdma_port_space {
-- 
cgit v1.2.3


From 2f5de1512884da8c74bec2c76e8f114b972ab4be Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@voltaire.com>
Date: Tue, 22 Jul 2008 14:16:21 -0700
Subject: IB/iser: Add support for RDMA_CM_EVENT_ADDR_CHANGE event

Enhance iser to act upon notification on network stack changes that
make its RDMA connection unaligned with the link used by the stack for
the <src,dst> IPs used to establish the connection.

When RDMA_CM_EVENT_ADDR_CHANGE arrives, just disconnect the
connection, assuming that the user space iscsid daemon will reconnect,
and the new connection will be aligned with the IP stack.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/ulp/iser/iser_verbs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index 3a917c1f796..63462ecca14 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -483,6 +483,7 @@ static int iser_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *eve
 		break;
 	case RDMA_CM_EVENT_DISCONNECTED:
 	case RDMA_CM_EVENT_DEVICE_REMOVAL:
+	case RDMA_CM_EVENT_ADDR_CHANGE:
 		iser_disconnected_handler(cma_id);
 		break;
 	default:
-- 
cgit v1.2.3


From cf508b1211dbe576778ff445ea1b4b0bcfa5c4ea Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 22 Jul 2008 14:16:42 -0700
Subject: netdev: Handle ->addr_list_lock just like ->_xmit_lock for lockdep.

The new address list lock needs to handle the same device layering
issues that the _xmit_lock one does.

This integrates work done by Patrick McHardy.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c         |  3 +++
 drivers/net/hamradio/bpqether.c         |  2 ++
 drivers/net/macvlan.c                   |  3 +++
 drivers/net/wireless/hostap/hostap_hw.c |  3 +++
 net/8021q/vlan_dev.c                    |  4 ++++
 net/core/dev.c                          | 27 +++++++++++++++++++++------
 net/netrom/af_netrom.c                  |  2 ++
 net/rose/af_rose.c                      |  2 ++
 8 files changed, 40 insertions(+), 6 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 9737c06045d..a641eeaa2a2 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -5041,6 +5041,7 @@ static int bond_check_params(struct bond_params *params)
 }
 
 static struct lock_class_key bonding_netdev_xmit_lock_key;
+static struct lock_class_key bonding_netdev_addr_lock_key;
 
 static void bond_set_lockdep_class_one(struct net_device *dev,
 				       struct netdev_queue *txq,
@@ -5052,6 +5053,8 @@ static void bond_set_lockdep_class_one(struct net_device *dev,
 
 static void bond_set_lockdep_class(struct net_device *dev)
 {
+	lockdep_set_class(&dev->addr_list_lock,
+			  &bonding_netdev_addr_lock_key);
 	netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
 }
 
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index b6500b2aacf..58f4b1d7bf1 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -123,6 +123,7 @@ static LIST_HEAD(bpq_devices);
  * off into a separate class since they always nest.
  */
 static struct lock_class_key bpq_netdev_xmit_lock_key;
+static struct lock_class_key bpq_netdev_addr_lock_key;
 
 static void bpq_set_lockdep_class_one(struct net_device *dev,
 				      struct netdev_queue *txq,
@@ -133,6 +134,7 @@ static void bpq_set_lockdep_class_one(struct net_device *dev,
 
 static void bpq_set_lockdep_class(struct net_device *dev)
 {
+	lockdep_set_class(&dev->addr_list_lock, &bpq_netdev_addr_lock_key);
 	netdev_for_each_tx_queue(dev, bpq_set_lockdep_class_one, NULL);
 }
 
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index efbc15567dd..42394505bb5 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -276,6 +276,7 @@ static int macvlan_change_mtu(struct net_device *dev, int new_mtu)
  * separate class since they always nest.
  */
 static struct lock_class_key macvlan_netdev_xmit_lock_key;
+static struct lock_class_key macvlan_netdev_addr_lock_key;
 
 #define MACVLAN_FEATURES \
 	(NETIF_F_SG | NETIF_F_ALL_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \
@@ -295,6 +296,8 @@ static void macvlan_set_lockdep_class_one(struct net_device *dev,
 
 static void macvlan_set_lockdep_class(struct net_device *dev)
 {
+	lockdep_set_class(&dev->addr_list_lock,
+			  &macvlan_netdev_addr_lock_key);
 	netdev_for_each_tx_queue(dev, macvlan_set_lockdep_class_one, NULL);
 }
 
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 13d5882f1f2..3153fe9d7ce 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -3101,6 +3101,7 @@ static void prism2_clear_set_tim_queue(local_info_t *local)
  * This is a natural nesting, which needs a split lock type.
  */
 static struct lock_class_key hostap_netdev_xmit_lock_key;
+static struct lock_class_key hostap_netdev_addr_lock_key;
 
 static void prism2_set_lockdep_class_one(struct net_device *dev,
 					 struct netdev_queue *txq,
@@ -3112,6 +3113,8 @@ static void prism2_set_lockdep_class_one(struct net_device *dev,
 
 static void prism2_set_lockdep_class(struct net_device *dev)
 {
+	lockdep_set_class(&dev->addr_list_lock,
+			  &hostap_netdev_addr_lock_key);
 	netdev_for_each_tx_queue(dev, prism2_set_lockdep_class_one, NULL);
 }
 
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index f42bc2b26b8..4bf014e51f8 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -569,6 +569,7 @@ static void vlan_dev_set_rx_mode(struct net_device *vlan_dev)
  * separate class since they always nest.
  */
 static struct lock_class_key vlan_netdev_xmit_lock_key;
+static struct lock_class_key vlan_netdev_addr_lock_key;
 
 static void vlan_dev_set_lockdep_one(struct net_device *dev,
 				     struct netdev_queue *txq,
@@ -581,6 +582,9 @@ static void vlan_dev_set_lockdep_one(struct net_device *dev,
 
 static void vlan_dev_set_lockdep_class(struct net_device *dev, int subclass)
 {
+	lockdep_set_class_and_subclass(&dev->addr_list_lock,
+				       &vlan_netdev_addr_lock_key,
+				       subclass);
 	netdev_for_each_tx_queue(dev, vlan_dev_set_lockdep_one, &subclass);
 }
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 65eea83613e..6bf217da9d8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -261,7 +261,7 @@ static RAW_NOTIFIER_HEAD(netdev_chain);
 
 DEFINE_PER_CPU(struct softnet_data, softnet_data);
 
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#ifdef CONFIG_LOCKDEP
 /*
  * register_netdevice() inits txq->_xmit_lock and sets lockdep class
  * according to dev->type
@@ -301,6 +301,7 @@ static const char *netdev_lock_name[] =
 	 "_xmit_NONE"};
 
 static struct lock_class_key netdev_xmit_lock_key[ARRAY_SIZE(netdev_lock_type)];
+static struct lock_class_key netdev_addr_lock_key[ARRAY_SIZE(netdev_lock_type)];
 
 static inline unsigned short netdev_lock_pos(unsigned short dev_type)
 {
@@ -313,8 +314,8 @@ static inline unsigned short netdev_lock_pos(unsigned short dev_type)
 	return ARRAY_SIZE(netdev_lock_type) - 1;
 }
 
-static inline void netdev_set_lockdep_class(spinlock_t *lock,
-					    unsigned short dev_type)
+static inline void netdev_set_xmit_lockdep_class(spinlock_t *lock,
+						 unsigned short dev_type)
 {
 	int i;
 
@@ -322,9 +323,22 @@ static inline void netdev_set_lockdep_class(spinlock_t *lock,
 	lockdep_set_class_and_name(lock, &netdev_xmit_lock_key[i],
 				   netdev_lock_name[i]);
 }
+
+static inline void netdev_set_addr_lockdep_class(struct net_device *dev)
+{
+	int i;
+
+	i = netdev_lock_pos(dev->type);
+	lockdep_set_class_and_name(&dev->addr_list_lock,
+				   &netdev_addr_lock_key[i],
+				   netdev_lock_name[i]);
+}
 #else
-static inline void netdev_set_lockdep_class(spinlock_t *lock,
-					    unsigned short dev_type)
+static inline void netdev_set_xmit_lockdep_class(spinlock_t *lock,
+						 unsigned short dev_type)
+{
+}
+static inline void netdev_set_addr_lockdep_class(struct net_device *dev)
 {
 }
 #endif
@@ -3851,7 +3865,7 @@ static void __netdev_init_queue_locks_one(struct net_device *dev,
 					  void *_unused)
 {
 	spin_lock_init(&dev_queue->_xmit_lock);
-	netdev_set_lockdep_class(&dev_queue->_xmit_lock, dev->type);
+	netdev_set_xmit_lockdep_class(&dev_queue->_xmit_lock, dev->type);
 	dev_queue->xmit_lock_owner = -1;
 }
 
@@ -3896,6 +3910,7 @@ int register_netdevice(struct net_device *dev)
 	net = dev_net(dev);
 
 	spin_lock_init(&dev->addr_list_lock);
+	netdev_set_addr_lockdep_class(dev);
 	netdev_init_queue_locks(dev);
 
 	dev->iflink = -1;
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index fccc250f95f..532e4faa29f 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -73,6 +73,7 @@ static const struct proto_ops nr_proto_ops;
  * separate class since they always nest.
  */
 static struct lock_class_key nr_netdev_xmit_lock_key;
+static struct lock_class_key nr_netdev_addr_lock_key;
 
 static void nr_set_lockdep_one(struct net_device *dev,
 			       struct netdev_queue *txq,
@@ -83,6 +84,7 @@ static void nr_set_lockdep_one(struct net_device *dev,
 
 static void nr_set_lockdep_key(struct net_device *dev)
 {
+	lockdep_set_class(&dev->addr_list_lock, &nr_netdev_addr_lock_key);
 	netdev_for_each_tx_queue(dev, nr_set_lockdep_one, NULL);
 }
 
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index dbc963b4f5f..a7f1ce11bc2 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -74,6 +74,7 @@ ax25_address rose_callsign;
  * separate class since they always nest.
  */
 static struct lock_class_key rose_netdev_xmit_lock_key;
+static struct lock_class_key rose_netdev_addr_lock_key;
 
 static void rose_set_lockdep_one(struct net_device *dev,
 				 struct netdev_queue *txq,
@@ -84,6 +85,7 @@ static void rose_set_lockdep_one(struct net_device *dev,
 
 static void rose_set_lockdep_key(struct net_device *dev)
 {
+	lockdep_set_class(&dev->addr_list_lock, &rose_netdev_addr_lock_key);
 	netdev_for_each_tx_queue(dev, rose_set_lockdep_one, NULL);
 }
 
-- 
cgit v1.2.3


From 5b673b71c8ca0fbdb99dc1b1434cfb554212d6ff Mon Sep 17 00:00:00 2001
From: Joachim Fenkes <fenkes@de.ibm.com>
Date: Tue, 22 Jul 2008 14:18:07 -0700
Subject: IB/ehca: Filter PATH_MIG events if QP was never armed

Certain firmware versions sometimes cause spurious PATH_MIG events to
occur during QP creation.  Filter these events by making sure PATH_MIG
events are only handed down when they actually make sense (i.e. when
the QP has been armed at least once).

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/ehca/ehca_classes.h | 1 +
 drivers/infiniband/hw/ehca/ehca_irq.c     | 4 ++++
 drivers/infiniband/hw/ehca/ehca_qp.c      | 2 ++
 3 files changed, 7 insertions(+)

diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 1e9e99a1393..0b0618edd64 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -194,6 +194,7 @@ struct ehca_qp {
 	u32 packet_count;
 	atomic_t nr_events; /* events seen */
 	wait_queue_head_t wait_completion;
+	int mig_armed;
 };
 
 #define IS_SRQ(qp) (qp->ext_type == EQPT_SRQ)
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index 0792d930c48..99642a6e17c 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -178,6 +178,10 @@ static void dispatch_qp_event(struct ehca_shca *shca, struct ehca_qp *qp,
 {
 	struct ib_event event;
 
+	/* PATH_MIG without the QP ever having been armed is false alarm */
+	if (event_type == IB_EVENT_PATH_MIG && !qp->mig_armed)
+		return;
+
 	event.device = &shca->ib_device;
 	event.event = event_type;
 
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 3f59587338e..ea13efddf17 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -1460,6 +1460,8 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 			goto modify_qp_exit2;
 		}
 		mqpcb->path_migration_state = attr->path_mig_state + 1;
+		if (attr->path_mig_state == IB_MIG_REARM)
+			my_qp->mig_armed = 1;
 		update_mask |=
 			EHCA_BMASK_SET(MQPCB_MASK_PATH_MIGRATION_STATE, 1);
 	}
-- 
cgit v1.2.3


From 593e4d4a05c8263a6dbd5452c21d47c5bdadd40c Mon Sep 17 00:00:00 2001
From: Joachim Fenkes <fenkes@de.ibm.com>
Date: Tue, 22 Jul 2008 14:18:08 -0700
Subject: IB/ehca: Use default value for Local CA ACK Delay if FW returns 0

Some firmware versions report a Local CA ACK Delay of 0.  In that
case, return a more sensible default value of 12 (-> 16 msec) instead.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/ehca/ehca_hca.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index bc3b37d2070..46288220cfb 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -114,7 +114,9 @@ int ehca_query_device(struct ib_device *ibdev, struct ib_device_attr *props)
 	}
 
 	props->max_pkeys           = 16;
-	props->local_ca_ack_delay  = min_t(u8, rblock->local_ca_ack_delay, 255);
+	/* Some FW versions say 0 here; insert sensible value in that case */
+	props->local_ca_ack_delay  = rblock->local_ca_ack_delay ?
+		min_t(u8, rblock->local_ca_ack_delay, 255) : 12;
 	props->max_raw_ipv6_qp     = limit_uint(rblock->max_raw_ipv6_qp);
 	props->max_raw_ethy_qp     = limit_uint(rblock->max_raw_ethy_qp);
 	props->max_mcast_grp       = limit_uint(rblock->max_mcast_grp);
-- 
cgit v1.2.3


From 1a867c33bb65f2921351a9bdd98548bb96f0ff8c Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 22 Jul 2008 14:18:10 -0700
Subject: IB/ehca: Release mutex in error path of alloc_small_queue_page()

The pd->lock mutex is released on a successful return, so it should be
released on an error return as well.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression l;
@@

mutex_lock(l);
... when != mutex_unlock(l)
    when any
    when strict
(
if (...) { ... when != mutex_unlock(l)
+   mutex_unlock(l);
    return ...;
}
|
mutex_unlock(l);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/ehca/ipz_pt_fn.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/ehca/ipz_pt_fn.c b/drivers/infiniband/hw/ehca/ipz_pt_fn.c
index 661f8db6270..c3a32846543 100644
--- a/drivers/infiniband/hw/ehca/ipz_pt_fn.c
+++ b/drivers/infiniband/hw/ehca/ipz_pt_fn.c
@@ -163,6 +163,7 @@ static int alloc_small_queue_page(struct ipz_queue *queue, struct ehca_pd *pd)
 
 out:
 	ehca_err(pd->ib_pd.device, "failed to allocate small queue page");
+	mutex_unlock(&pd->lock);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 64b784b583061ebfe1d484dd1fdc5a26c6d4293f Mon Sep 17 00:00:00 2001
From: Ralph Campbell <ralph.campbell@qlogic.com>
Date: Tue, 22 Jul 2008 14:18:33 -0700
Subject: IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one()

If update_sm_ah() fails, it leaves the port's sm_ah as NULL.  Then if
the device or module is removed, ib_sa_remove_one() will dereference a
NULL pointer when it calls kref_put().  Fix this by testing if sm_ah
is NULL before dropping the reference.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/core/sa_query.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index 1341de793e5..7863a50d56f 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -1064,7 +1064,8 @@ static void ib_sa_remove_one(struct ib_device *device)
 
 	for (i = 0; i <= sa_dev->end_port - sa_dev->start_port; ++i) {
 		ib_unregister_mad_agent(sa_dev->port[i].agent);
-		kref_put(&sa_dev->port[i].sm_ah->ref, free_sm_ah);
+		if (sa_dev->port[i].sm_ah)
+			kref_put(&sa_dev->port[i].sm_ah->ref, free_sm_ah);
 	}
 
 	kfree(sa_dev);
-- 
cgit v1.2.3


From 01b3fc8b15432f7931e40fe099839e1559fb0e09 Mon Sep 17 00:00:00 2001
From: Or Gerlitz <ogerlitz@voltaire.com>
Date: Tue, 22 Jul 2008 14:18:34 -0700
Subject: IPoIB: Include err code in trace message for ib_sa_path_rec_get()
 failures

Print the return code of ib_sa_path_rec_get() if it fails to help
debug errors.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 8be9ea0436e..f51201b17bf 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -548,7 +548,7 @@ static int path_rec_start(struct net_device *dev,
 				   path_rec_completion,
 				   path, &path->query);
 	if (path->query_id < 0) {
-		ipoib_warn(priv, "ib_sa_path_rec_get failed\n");
+		ipoib_warn(priv, "ib_sa_path_rec_get failed: %d\n", path->query_id);
 		path->query = NULL;
 		return path->query_id;
 	}
-- 
cgit v1.2.3


From 1ca8d15619f725e223c19137350b0336b9196193 Mon Sep 17 00:00:00 2001
From: Dotan Barak <dotanba@gmail.com>
Date: Tue, 22 Jul 2008 14:18:34 -0700
Subject: RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributes

Remove IB_ACCESS_LOCAL_WRITE from qp.qp_access_flags because this
attribute is only used to set remote permissions.

Signed-off-by: Dotan Barak <dotanba@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/core/iwcm.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index 81c9195b512..8f9509e1ebf 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -942,8 +942,7 @@ static int iwcm_init_qp_init_attr(struct iwcm_id_private *cm_id_priv,
 	case IW_CM_STATE_CONN_RECV:
 	case IW_CM_STATE_ESTABLISHED:
 		*qp_attr_mask = IB_QP_STATE | IB_QP_ACCESS_FLAGS;
-		qp_attr->qp_access_flags = IB_ACCESS_LOCAL_WRITE |
-					   IB_ACCESS_REMOTE_WRITE|
+		qp_attr->qp_access_flags = IB_ACCESS_REMOTE_WRITE|
 					   IB_ACCESS_REMOTE_READ;
 		ret = 0;
 		break;
-- 
cgit v1.2.3


From 8086cd451f08f4c0f9693fc66d87754bbd18cfba Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 22 Jul 2008 14:19:19 -0700
Subject: netns: make get_proc_net() static

get_proc_net() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 fs/proc/proc_net.c      | 11 +++++------
 include/linux/proc_fs.h |  2 --
 2 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c
index b224a28e0c1..7bc296f424a 100644
--- a/fs/proc/proc_net.c
+++ b/fs/proc/proc_net.c
@@ -27,6 +27,11 @@
 #include "internal.h"
 
 
+static struct net *get_proc_net(const struct inode *inode)
+{
+	return maybe_get_net(PDE_NET(PDE(inode)));
+}
+
 int seq_open_net(struct inode *ino, struct file *f,
 		 const struct seq_operations *ops, int size)
 {
@@ -185,12 +190,6 @@ void proc_net_remove(struct net *net, const char *name)
 }
 EXPORT_SYMBOL_GPL(proc_net_remove);
 
-struct net *get_proc_net(const struct inode *inode)
-{
-	return maybe_get_net(PDE_NET(PDE(inode)));
-}
-EXPORT_SYMBOL_GPL(get_proc_net);
-
 static __net_init int proc_net_ns_init(struct net *net)
 {
 	struct proc_dir_entry *netd, *net_statd;
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index fff1d27ddb4..15a9eaf4a80 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -305,8 +305,6 @@ static inline struct net *PDE_NET(struct proc_dir_entry *pde)
 	return pde->parent->data;
 }
 
-struct net *get_proc_net(const struct inode *inode);
-
 struct proc_maps_private {
 	struct pid *pid;
 	struct task_struct *task;
-- 
cgit v1.2.3


From 51f5f0ee22b98980f7816d42647467cd5f4b3b45 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Tue, 22 Jul 2008 14:19:37 -0700
Subject: mlx4_core: Add module parameter to enable QoS support

Add a module parameter "enable_qos" to mlx4_core.  If this param is
set, enable support for QoS in the INIT_HCA command.  By default, the
parameter is set to 0 (disabled).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/net/mlx4/fw.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index 2b5006b9be6..0851ebdddfd 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -46,6 +46,10 @@ enum {
 extern void __buggy_use_of_MLX4_GET(void);
 extern void __buggy_use_of_MLX4_PUT(void);
 
+static int enable_qos;
+module_param(enable_qos, bool, 0444);
+MODULE_PARM_DESC(enable_qos, "Enable Quality of Service support in the HCA (default: off)");
+
 #define MLX4_GET(dest, source, offset)				      \
 	do {							      \
 		void *__p = (char *) (source) + (offset);	      \
@@ -737,6 +741,10 @@ int mlx4_INIT_HCA(struct mlx4_dev *dev, struct mlx4_init_hca_param *param)
 	if (dev->caps.flags & MLX4_DEV_CAP_FLAG_IPOIB_CSUM)
 		*(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1 << 3);
 
+	/* Enable QoS support if module parameter set */
+	if (enable_qos)
+		*(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1 << 2);
+
 	/* QPC/EEC/CQC/EQC/RDMARC attributes */
 
 	MLX4_PUT(inbox, param->qpc_base,      INIT_HCA_QPC_BASE_OFFSET);
-- 
cgit v1.2.3


From 47b374752aed1c029f995473c7c463ee3ae5fbaa Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Tue, 22 Jul 2008 14:19:39 -0700
Subject: IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg

Make the struct name consistent with other WQE segment struct types
defined in <linux/mlx4/qp.h>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/mlx4/qp.c | 2 +-
 include/linux/mlx4/qp.h         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 89eb6cbe592..bda0859a5ac 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1395,7 +1395,7 @@ static void __set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg)
 	dseg->addr       = cpu_to_be64(sg->addr);
 }
 
-static int build_lso_seg(struct mlx4_lso_seg *wqe, struct ib_send_wr *wr,
+static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr,
 			 struct mlx4_ib_qp *qp, unsigned *lso_seg_len)
 {
 	unsigned halign = ALIGN(sizeof *wqe + wr->wr.ud.hlen, 16);
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 7f128b266fa..f02e9ed36cf 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -219,7 +219,7 @@ struct mlx4_wqe_datagram_seg {
 	__be32			reservd[2];
 };
 
-struct mlx4_lso_seg {
+struct mlx4_wqe_lso_seg {
 	__be32			mss_hdr_size;
 	__be32			header[0];
 };
-- 
cgit v1.2.3


From 899698dad72340b562478b8b770317f2f0fe0c09 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Tue, 22 Jul 2008 14:19:39 -0700
Subject: mlx4_code: Add missing FW status return code

Add ICM_ERROR firmware status code.  In mapping to errnos, -ENFILE
seems closest.

This is in preparation for providing more detailed log info using
mlx4_err() in low-level driver when a non-zero status is returned.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/net/mlx4/cmd.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/mlx4/cmd.c b/drivers/net/mlx4/cmd.c
index 70dff94a8bc..04d5bc69a6f 100644
--- a/drivers/net/mlx4/cmd.c
+++ b/drivers/net/mlx4/cmd.c
@@ -67,6 +67,8 @@ enum {
 	CMD_STAT_BAD_INDEX	= 0x0a,
 	/* FW image corrupted: */
 	CMD_STAT_BAD_NVMEM	= 0x0b,
+	/* Error in ICM mapping (e.g. not enough auxiliary ICM pages to execute command): */
+	CMD_STAT_ICM_ERROR	= 0x0c,
 	/* Attempt to modify a QP/EE which is not in the presumed state: */
 	CMD_STAT_BAD_QP_STATE   = 0x10,
 	/* Bad segment parameters (Address/Size): */
@@ -119,6 +121,7 @@ static int mlx4_status_to_errno(u8 status)
 		[CMD_STAT_BAD_RES_STATE]  = -EBADF,
 		[CMD_STAT_BAD_INDEX]	  = -EBADF,
 		[CMD_STAT_BAD_NVMEM]	  = -EFAULT,
+		[CMD_STAT_ICM_ERROR]	  = -ENFILE,
 		[CMD_STAT_BAD_QP_STATE]   = -EINVAL,
 		[CMD_STAT_BAD_SEG_PARAM]  = -EFAULT,
 		[CMD_STAT_REG_BOUND]	  = -EBUSY,
-- 
cgit v1.2.3


From e4044cfc493338cd09870bd45dc646336bb66e9f Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Tue, 22 Jul 2008 14:19:40 -0700
Subject: mlx4_core: Keep free count for MTT buddy allocator

MTT entries are allocated with a buddy allocator, which just keeps
bitmaps for each level of the buddy table.  However, all free space
starts out at the highest order, and small allocations start scanning
from the lowest order.  When the lowest order tables have no free
space, this can lead to scanning potentially millions of bits before
finding a free entry at a higher order.

We can avoid this by just keeping a count of how many free entries
each order has, and skipping the bitmap scan when an order is
completely empty.  This provides a nice performance boost for a
negligible increase in memory usage.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/net/mlx4/mlx4.h |  1 +
 drivers/net/mlx4/mr.c   | 26 ++++++++++++++++++--------
 2 files changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index a4023c2dd05..78038499cff 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -118,6 +118,7 @@ struct mlx4_bitmap {
 
 struct mlx4_buddy {
 	unsigned long	      **bits;
+	unsigned int	       *num_free;
 	int			max_order;
 	spinlock_t		lock;
 };
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index 03a9abcce52..b3ea93b9868 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -79,23 +79,26 @@ static u32 mlx4_buddy_alloc(struct mlx4_buddy *buddy, int order)
 
 	spin_lock(&buddy->lock);
 
-	for (o = order; o <= buddy->max_order; ++o) {
-		m = 1 << (buddy->max_order - o);
-		seg = find_first_bit(buddy->bits[o], m);
-		if (seg < m)
-			goto found;
-	}
+	for (o = order; o <= buddy->max_order; ++o)
+		if (buddy->num_free[o]) {
+			m = 1 << (buddy->max_order - o);
+			seg = find_first_bit(buddy->bits[o], m);
+			if (seg < m)
+				goto found;
+		}
 
 	spin_unlock(&buddy->lock);
 	return -1;
 
  found:
 	clear_bit(seg, buddy->bits[o]);
+	--buddy->num_free[o];
 
 	while (o > order) {
 		--o;
 		seg <<= 1;
 		set_bit(seg ^ 1, buddy->bits[o]);
+		++buddy->num_free[o];
 	}
 
 	spin_unlock(&buddy->lock);
@@ -113,11 +116,13 @@ static void mlx4_buddy_free(struct mlx4_buddy *buddy, u32 seg, int order)
 
 	while (test_bit(seg ^ 1, buddy->bits[order])) {
 		clear_bit(seg ^ 1, buddy->bits[order]);
+		--buddy->num_free[order];
 		seg >>= 1;
 		++order;
 	}
 
 	set_bit(seg, buddy->bits[order]);
+	++buddy->num_free[order];
 
 	spin_unlock(&buddy->lock);
 }
@@ -131,7 +136,9 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order)
 
 	buddy->bits = kzalloc((buddy->max_order + 1) * sizeof (long *),
 			      GFP_KERNEL);
-	if (!buddy->bits)
+	buddy->num_free = kzalloc((buddy->max_order + 1) * sizeof (int *),
+				  GFP_KERNEL);
+	if (!buddy->bits || !buddy->num_free)
 		goto err_out;
 
 	for (i = 0; i <= buddy->max_order; ++i) {
@@ -143,6 +150,7 @@ static int mlx4_buddy_init(struct mlx4_buddy *buddy, int max_order)
 	}
 
 	set_bit(0, buddy->bits[buddy->max_order]);
+	buddy->num_free[buddy->max_order] = 1;
 
 	return 0;
 
@@ -150,9 +158,10 @@ err_out_free:
 	for (i = 0; i <= buddy->max_order; ++i)
 		kfree(buddy->bits[i]);
 
+err_out:
 	kfree(buddy->bits);
+	kfree(buddy->num_free);
 
-err_out:
 	return -ENOMEM;
 }
 
@@ -164,6 +173,7 @@ static void mlx4_buddy_cleanup(struct mlx4_buddy *buddy)
 		kfree(buddy->bits[i]);
 
 	kfree(buddy->bits);
+	kfree(buddy->num_free);
 }
 
 static u32 mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order)
-- 
cgit v1.2.3


From e8bb4beb2b1f90d499134f2849727ed04c3bedc4 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Tue, 22 Jul 2008 14:20:05 -0700
Subject: IB/mthca: Keep free count for MTT buddy allocator

MTT entries are allocated with a buddy allocator, which just keeps
bitmaps for each level of the buddy table.  However, all free space
starts out at the highest order, and small allocations start scanning
from the lowest order.  When the lowest order tables have no free
space, this can lead to scanning potentially millions of bits before
finding a free entry at a higher order.

We can avoid this by just keeping a count of how many free entries
each order has, and skipping the bitmap scan when an order is
completely empty.  This provides a nice performance boost for a
negligible increase in memory usage.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/mthca/mthca_dev.h |  1 +
 drivers/infiniband/hw/mthca/mthca_mr.c  | 26 ++++++++++++++++++--------
 2 files changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index ee4d073c889..252590116df 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -202,6 +202,7 @@ struct mthca_pd_table {
 
 struct mthca_buddy {
 	unsigned long **bits;
+	int	       *num_free;
 	int             max_order;
 	spinlock_t      lock;
 };
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index 8489b1e81c0..882e6b73591 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -89,23 +89,26 @@ static u32 mthca_buddy_alloc(struct mthca_buddy *buddy, int order)
 
 	spin_lock(&buddy->lock);
 
-	for (o = order; o <= buddy->max_order; ++o) {
-		m = 1 << (buddy->max_order - o);
-		seg = find_first_bit(buddy->bits[o], m);
-		if (seg < m)
-			goto found;
-	}
+	for (o = order; o <= buddy->max_order; ++o)
+		if (buddy->num_free[o]) {
+			m = 1 << (buddy->max_order - o);
+			seg = find_first_bit(buddy->bits[o], m);
+			if (seg < m)
+				goto found;
+		}
 
 	spin_unlock(&buddy->lock);
 	return -1;
 
  found:
 	clear_bit(seg, buddy->bits[o]);
+	--buddy->num_free[o];
 
 	while (o > order) {
 		--o;
 		seg <<= 1;
 		set_bit(seg ^ 1, buddy->bits[o]);
+		++buddy->num_free[o];
 	}
 
 	spin_unlock(&buddy->lock);
@@ -123,11 +126,13 @@ static void mthca_buddy_free(struct mthca_buddy *buddy, u32 seg, int order)
 
 	while (test_bit(seg ^ 1, buddy->bits[order])) {
 		clear_bit(seg ^ 1, buddy->bits[order]);
+		--buddy->num_free[order];
 		seg >>= 1;
 		++order;
 	}
 
 	set_bit(seg, buddy->bits[order]);
+	++buddy->num_free[order];
 
 	spin_unlock(&buddy->lock);
 }
@@ -141,7 +146,9 @@ static int mthca_buddy_init(struct mthca_buddy *buddy, int max_order)
 
 	buddy->bits = kzalloc((buddy->max_order + 1) * sizeof (long *),
 			      GFP_KERNEL);
-	if (!buddy->bits)
+	buddy->num_free = kzalloc((buddy->max_order + 1) * sizeof (int *),
+				  GFP_KERNEL);
+	if (!buddy->bits || !buddy->num_free)
 		goto err_out;
 
 	for (i = 0; i <= buddy->max_order; ++i) {
@@ -154,6 +161,7 @@ static int mthca_buddy_init(struct mthca_buddy *buddy, int max_order)
 	}
 
 	set_bit(0, buddy->bits[buddy->max_order]);
+	buddy->num_free[buddy->max_order] = 1;
 
 	return 0;
 
@@ -161,9 +169,10 @@ err_out_free:
 	for (i = 0; i <= buddy->max_order; ++i)
 		kfree(buddy->bits[i]);
 
+err_out:
 	kfree(buddy->bits);
+	kfree(buddy->num_free);
 
-err_out:
 	return -ENOMEM;
 }
 
@@ -175,6 +184,7 @@ static void mthca_buddy_cleanup(struct mthca_buddy *buddy)
 		kfree(buddy->bits[i]);
 
 	kfree(buddy->bits);
+	kfree(buddy->num_free);
 }
 
 static u32 mthca_alloc_mtt_range(struct mthca_dev *dev, int order,
-- 
cgit v1.2.3


From a94f779f9d82eb2d758a8715eaae5df98e8dcb21 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 22 Jul 2008 14:20:11 -0700
Subject: pkt_sched: make qdisc_class_hash_alloc() static

This patch makes the needlessly global qdisc_class_hash_alloc() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 5219d5f9d75..b0601642e22 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -447,7 +447,7 @@ void qdisc_watchdog_cancel(struct qdisc_watchdog *wd)
 }
 EXPORT_SYMBOL(qdisc_watchdog_cancel);
 
-struct hlist_head *qdisc_class_hash_alloc(unsigned int n)
+static struct hlist_head *qdisc_class_hash_alloc(unsigned int n)
 {
 	unsigned int size = n * sizeof(struct hlist_head), i;
 	struct hlist_head *h;
-- 
cgit v1.2.3


From abd0b198ea699578c3c3476d646c91842e19dbd2 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 22 Jul 2008 14:20:45 -0700
Subject: sctp: make sctp_outq_flush() static

sctp_outq_flush() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/sctp/structs.h | 1 -
 net/sctp/outqueue.c        | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 70eb64a7e1a..535a18f57a1 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -1161,7 +1161,6 @@ void sctp_outq_init(struct sctp_association *, struct sctp_outq *);
 void sctp_outq_teardown(struct sctp_outq *);
 void sctp_outq_free(struct sctp_outq*);
 int sctp_outq_tail(struct sctp_outq *, struct sctp_chunk *chunk);
-int sctp_outq_flush(struct sctp_outq *, int);
 int sctp_outq_sack(struct sctp_outq *, struct sctp_sackhdr *);
 int sctp_outq_is_empty(const struct sctp_outq *);
 void sctp_outq_restart(struct sctp_outq *);
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 70ead8dc348..4328ad5439c 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -71,6 +71,8 @@ static void sctp_mark_missing(struct sctp_outq *q,
 
 static void sctp_generate_fwdtsn(struct sctp_outq *q, __u32 sack_ctsn);
 
+static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout);
+
 /* Add data to the front of the queue. */
 static inline void sctp_outq_head_data(struct sctp_outq *q,
 					struct sctp_chunk *ch)
@@ -712,7 +714,7 @@ int sctp_outq_uncork(struct sctp_outq *q)
  * locking concerns must be made.  Today we use the sock lock to protect
  * this function.
  */
-int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout)
+static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout)
 {
 	struct sctp_packet *packet;
 	struct sctp_packet singleton;
-- 
cgit v1.2.3


From 4d6971e909e904be60218739fc961188471fc4f4 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 22 Jul 2008 14:21:30 -0700
Subject: sctp: remove sctp_assoc_proc_exit()

Commit 20c2c1fd6c842caf70dcb1d94b9d58861949fd3d
(sctp: add sctp/remaddr table to complete RFC remote address table OID)
added an unused sctp_assoc_proc_exit() function that seems to have been
unintentionally created when copying the assocs code.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sctp/proc.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index 5dd89831ece..f268910620b 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -519,8 +519,3 @@ int __init sctp_remaddr_proc_init(void)
 
 	return 0;
 }
-
-void sctp_assoc_proc_exit(void)
-{
-	remove_proc_entry("remaddr", proc_net_sctp);
-}
-- 
cgit v1.2.3


From 888c848ed34bd5f8cb56567624c0d951ab35174e Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 22 Jul 2008 14:21:58 -0700
Subject: ipv6: make struct ipv6_devconf static

struct ipv6_devconf can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/if_inet6.h | 2 --
 net/ipv6/addrconf.c    | 2 +-
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index db66c792774..c8effa4b1fe 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -193,8 +193,6 @@ struct inet6_dev
 	struct rcu_head		rcu;
 };
 
-extern struct ipv6_devconf ipv6_devconf;
-
 static inline void ipv6_eth_mc_map(struct in6_addr *addr, char *buf)
 {
 	/*
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 9f4fcce6379..74d543d504a 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -153,7 +153,7 @@ static int ipv6_chk_same_addr(struct net *net, const struct in6_addr *addr,
 
 static ATOMIC_NOTIFIER_HEAD(inet6addr_chain);
 
-struct ipv6_devconf ipv6_devconf __read_mostly = {
+static struct ipv6_devconf ipv6_devconf __read_mostly = {
 	.forwarding		= 0,
 	.hop_limit		= IPV6_DEFAULT_HOPLIMIT,
 	.mtu6			= IPV6_MIN_MTU,
-- 
cgit v1.2.3


From e5899e1b7d73e67de758a32174a859cc2586c0b9 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sat, 19 Jul 2008 14:39:24 +0200
Subject: PCI PM: make more PCI PM core functionality available to drivers

Make more PCI PM core functionality available to drivers

* Export pci_pme_capable() so that it can be called directly by
  drivers (for example, tg3 needs that).

* Move the state choosing part of pci_prepare_to_sleep() to a
  separate function, pci_target_state(), that can be called directly
  by drivers (for example, tg3 needs that).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/pci.c   | 34 ++++++++++++++++++++++++----------
 include/linux/pci.h |  2 ++
 2 files changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d00f0e0d845..e9c356236d2 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1040,7 +1040,7 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
  * @dev: PCI device to handle.
  * @state: PCI state from which device will issue PME#.
  */
-static bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
+bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
 {
 	if (!dev->pm_cap)
 		return false;
@@ -1123,17 +1123,10 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
 }
 
 /**
- * pci_prepare_to_sleep - prepare PCI device for system-wide transition into a sleep state
- * @dev: Device to handle.
- *
- * Choose the power state appropriate for the device depending on whether
- * it can wake up the system and/or is power manageable by the platform
- * (PCI_D3hot is the default) and put the device into that state.
  */
-int pci_prepare_to_sleep(struct pci_dev *dev)
+pci_power_t pci_target_state(struct pci_dev *dev)
 {
 	pci_power_t target_state = PCI_D3hot;
-	int error;
 
 	if (platform_pci_power_manageable(dev)) {
 		/*
@@ -1160,7 +1153,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
 		 * to generate PME#.
 		 */
 		if (!dev->pm_cap)
-			return -EIO;
+			return PCI_POWER_ERROR;
 
 		if (dev->pme_support) {
 			while (target_state
@@ -1169,6 +1162,25 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
 		}
 	}
 
+	return target_state;
+}
+
+/**
+ * pci_prepare_to_sleep - prepare PCI device for system-wide transition into a sleep state
+ * @dev: Device to handle.
+ *
+ * Choose the power state appropriate for the device depending on whether
+ * it can wake up the system and/or is power manageable by the platform
+ * (PCI_D3hot is the default) and put the device into that state.
+ */
+int pci_prepare_to_sleep(struct pci_dev *dev)
+{
+	pci_power_t target_state = pci_target_state(dev);
+	int error;
+
+	if (target_state == PCI_POWER_ERROR)
+		return -EIO;
+
 	pci_enable_wake(dev, target_state, true);
 
 	error = pci_set_power_state(dev, target_state);
@@ -1918,7 +1930,9 @@ EXPORT_SYMBOL(pci_select_bars);
 EXPORT_SYMBOL(pci_set_power_state);
 EXPORT_SYMBOL(pci_save_state);
 EXPORT_SYMBOL(pci_restore_state);
+EXPORT_SYMBOL(pci_pme_capable);
 EXPORT_SYMBOL(pci_enable_wake);
+EXPORT_SYMBOL(pci_target_state);
 EXPORT_SYMBOL(pci_prepare_to_sleep);
 EXPORT_SYMBOL(pci_back_from_sleep);
 EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index a6a088e1a80..1d296d31abe 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -638,7 +638,9 @@ int pci_save_state(struct pci_dev *dev);
 int pci_restore_state(struct pci_dev *dev);
 int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
+bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
 int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+pci_power_t pci_target_state(struct pci_dev *dev);
 int pci_prepare_to_sleep(struct pci_dev *dev);
 int pci_back_from_sleep(struct pci_dev *dev);
 
-- 
cgit v1.2.3


From 428695b89831d781ba203d97ee07da68150ea40d Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 22 Jul 2008 14:30:55 -0700
Subject: sparc: Fixes the DRM layer build on sparc.

By providing an ioremap_wc().

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/asm-sparc/io_32.h | 1 +
 include/asm-sparc/io_64.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/include/asm-sparc/io_32.h b/include/asm-sparc/io_32.h
index c43af722ae8..10d7da45007 100644
--- a/include/asm-sparc/io_32.h
+++ b/include/asm-sparc/io_32.h
@@ -244,6 +244,7 @@ _memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
  */
 extern void __iomem *ioremap(unsigned long offset, unsigned long size);
 #define ioremap_nocache(X,Y)	ioremap((X),(Y))
+#define ioremap_wc(X,Y)		ioremap((X),(Y))
 extern void iounmap(volatile void __iomem *addr);
 
 #define ioread8(X)			readb(X)
diff --git a/include/asm-sparc/io_64.h b/include/asm-sparc/io_64.h
index 11daa31cdaf..0bff078ffdd 100644
--- a/include/asm-sparc/io_64.h
+++ b/include/asm-sparc/io_64.h
@@ -460,6 +460,7 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
 }
 
 #define ioremap_nocache(X,Y)		ioremap((X),(Y))
+#define ioremap_wc(X,Y)			ioremap((X),(Y))
 
 static inline void iounmap(volatile void __iomem *addr)
 {
-- 
cgit v1.2.3


From 417f28bb340725544c36b35465444d2fd57232b8 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 22 Jul 2008 14:33:45 -0700
Subject: netns: dont alloc ipv6 fib timer list

FIB timer list is a trivial size structure, avoid indirection and just
put it in existing ns.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/netns/ipv6.h |  2 +-
 net/ipv6/ip6_fib.c       | 40 +++++++++++++---------------------------
 2 files changed, 14 insertions(+), 28 deletions(-)

diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h
index 5bacd838e88..2932721180c 100644
--- a/include/net/netns/ipv6.h
+++ b/include/net/netns/ipv6.h
@@ -39,7 +39,7 @@ struct netns_ipv6 {
 #endif
 	struct rt6_info         *ip6_null_entry;
 	struct rt6_statistics   *rt6_stats;
-	struct timer_list       *ip6_fib_timer;
+	struct timer_list       ip6_fib_timer;
 	struct hlist_head       *fib_table_hash;
 	struct fib6_table       *fib6_main_tbl;
 	struct dst_ops		*ip6_dst_ops;
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 944095cf5e3..e0922975c41 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -661,16 +661,16 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct rt6_info *rt,
 
 static __inline__ void fib6_start_gc(struct net *net, struct rt6_info *rt)
 {
-	if (!timer_pending(net->ipv6.ip6_fib_timer) &&
+	if (!timer_pending(&net->ipv6.ip6_fib_timer) &&
 	    (rt->rt6i_flags & (RTF_EXPIRES|RTF_CACHE)))
-		mod_timer(net->ipv6.ip6_fib_timer,
+		mod_timer(&net->ipv6.ip6_fib_timer,
 			  jiffies + net->ipv6.sysctl.ip6_rt_gc_interval);
 }
 
 void fib6_force_start_gc(struct net *net)
 {
-	if (!timer_pending(net->ipv6.ip6_fib_timer))
-		mod_timer(net->ipv6.ip6_fib_timer,
+	if (!timer_pending(&net->ipv6.ip6_fib_timer))
+		mod_timer(&net->ipv6.ip6_fib_timer,
 			  jiffies + net->ipv6.sysctl.ip6_rt_gc_interval);
 }
 
@@ -1449,7 +1449,7 @@ void fib6_run_gc(unsigned long expires, struct net *net)
 	} else {
 		local_bh_disable();
 		if (!spin_trylock(&fib6_gc_lock)) {
-			mod_timer(net->ipv6.ip6_fib_timer, jiffies + HZ);
+			mod_timer(&net->ipv6.ip6_fib_timer, jiffies + HZ);
 			local_bh_enable();
 			return;
 		}
@@ -1462,12 +1462,10 @@ void fib6_run_gc(unsigned long expires, struct net *net)
 	fib6_clean_all(net, fib6_age, 0, NULL);
 
 	if (gc_args.more)
-		mod_timer(net->ipv6.ip6_fib_timer, jiffies +
+		mod_timer(&net->ipv6.ip6_fib_timer, jiffies +
 			  net->ipv6.sysctl.ip6_rt_gc_interval);
-	else {
-		del_timer(net->ipv6.ip6_fib_timer);
-		net->ipv6.ip6_fib_timer->expires = 0;
-	}
+	else
+		del_timer(&net->ipv6.ip6_fib_timer);
 	spin_unlock_bh(&fib6_gc_lock);
 }
 
@@ -1478,16 +1476,7 @@ static void fib6_gc_timer_cb(unsigned long arg)
 
 static int fib6_net_init(struct net *net)
 {
-	int ret;
-	struct timer_list *timer;
-
-	ret = -ENOMEM;
-	timer = kzalloc(sizeof(*timer), GFP_KERNEL);
-	if (!timer)
-		goto out;
-
-	setup_timer(timer, fib6_gc_timer_cb, (unsigned long)net);
-	net->ipv6.ip6_fib_timer = timer;
+	setup_timer(&net->ipv6.ip6_fib_timer, fib6_gc_timer_cb, (unsigned long)net);
 
 	net->ipv6.rt6_stats = kzalloc(sizeof(*net->ipv6.rt6_stats), GFP_KERNEL);
 	if (!net->ipv6.rt6_stats)
@@ -1521,9 +1510,7 @@ static int fib6_net_init(struct net *net)
 #endif
 	fib6_tables_init(net);
 
-	ret = 0;
-out:
-	return ret;
+	return 0;
 
 #ifdef CONFIG_IPV6_MULTIPLE_TABLES
 out_fib6_main_tbl:
@@ -1534,15 +1521,14 @@ out_fib_table_hash:
 out_rt6_stats:
 	kfree(net->ipv6.rt6_stats);
 out_timer:
-	kfree(timer);
-	goto out;
+	return -ENOMEM;
  }
 
 static void fib6_net_exit(struct net *net)
 {
 	rt6_ifdown(net, NULL);
-	del_timer_sync(net->ipv6.ip6_fib_timer);
-	kfree(net->ipv6.ip6_fib_timer);
+	del_timer_sync(&net->ipv6.ip6_fib_timer);
+
 #ifdef CONFIG_IPV6_MULTIPLE_TABLES
 	kfree(net->ipv6.fib6_local_tbl);
 #endif
-- 
cgit v1.2.3


From c8a4522245e9931a53a98d5160bb4c00d3f73921 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 22 Jul 2008 14:34:09 -0700
Subject: ipv6: use round_jiffies

This timer normally happens once a minute, there is no need to cause an
early wakeup for it, so align it to next second boundary to safe power.
It can't be deferred because then it could take too long on cleanup or DoS.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/ip6_fib.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index e0922975c41..03e23d058ec 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1462,8 +1462,9 @@ void fib6_run_gc(unsigned long expires, struct net *net)
 	fib6_clean_all(net, fib6_age, 0, NULL);
 
 	if (gc_args.more)
-		mod_timer(&net->ipv6.ip6_fib_timer, jiffies +
-			  net->ipv6.sysctl.ip6_rt_gc_interval);
+		mod_timer(&net->ipv6.ip6_fib_timer,
+			  round_jiffies(jiffies
+					+ net->ipv6.sysctl.ip6_rt_gc_interval));
 	else
 		del_timer(&net->ipv6.ip6_fib_timer);
 	spin_unlock_bh(&fib6_gc_lock);
-- 
cgit v1.2.3


From a76d7345a3f92bb8352f200e7b2e380dddcd7e36 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 22 Jul 2008 14:34:35 -0700
Subject: ipv6: use spin_trylock_bh

Now there is spin_trylock_bh, use it rather than open coding.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/ip6_fib.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 03e23d058ec..0ec7f2b636f 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1447,10 +1447,8 @@ void fib6_run_gc(unsigned long expires, struct net *net)
 		gc_args.timeout = expires ? (int)expires :
 			net->ipv6.sysctl.ip6_rt_gc_interval;
 	} else {
-		local_bh_disable();
-		if (!spin_trylock(&fib6_gc_lock)) {
+		if (!spin_trylock_bh(&fib6_gc_lock)) {
 			mod_timer(&net->ipv6.ip6_fib_timer, jiffies + HZ);
-			local_bh_enable();
 			return;
 		}
 		gc_args.timeout = net->ipv6.sysctl.ip6_rt_gc_interval;
-- 
cgit v1.2.3


From 75307c0fe7fcb3b52a92fe32384fc33f50622654 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 22 Jul 2008 14:35:07 -0700
Subject: ipv6: use kcalloc

Th fib_table_hash is an array, so use kcalloc.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/ip6_fib.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 0ec7f2b636f..c72fd2461ca 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1481,9 +1481,9 @@ static int fib6_net_init(struct net *net)
 	if (!net->ipv6.rt6_stats)
 		goto out_timer;
 
-	net->ipv6.fib_table_hash =
-		kzalloc(sizeof(*net->ipv6.fib_table_hash)*FIB_TABLE_HASHSZ,
-			GFP_KERNEL);
+	net->ipv6.fib_table_hash = kcalloc(FIB_TABLE_HASHSZ,
+					   sizeof(*net->ipv6.fib_table_hash),
+					   GFP_KERNEL);
 	if (!net->ipv6.fib_table_hash)
 		goto out_rt6_stats;
 
-- 
cgit v1.2.3


From 3d0f24a74e7957593a5622eb5c04ed6860dd8391 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 22 Jul 2008 14:35:50 -0700
Subject: ipv6: icmp6_dst_gc return change

Change icmp6_dst_gc to return the one value the caller cares about rather
than using call by reference.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/ip6_route.h |  2 +-
 net/ipv6/ip6_fib.c      |  3 +--
 net/ipv6/route.c        | 10 ++++------
 3 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 9313491e3da..2f8b3c06a10 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -68,7 +68,7 @@ extern struct rt6_info		*rt6_lookup(struct net *net,
 extern struct dst_entry *icmp6_dst_alloc(struct net_device *dev,
 					 struct neighbour *neigh,
 					 const struct in6_addr *addr);
-extern int icmp6_dst_gc(int *more);
+extern int icmp6_dst_gc(void);
 
 extern void fib6_force_start_gc(struct net *net);
 
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index c72fd2461ca..08ea2de28d6 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1453,9 +1453,8 @@ void fib6_run_gc(unsigned long expires, struct net *net)
 		}
 		gc_args.timeout = net->ipv6.sysctl.ip6_rt_gc_interval;
 	}
-	gc_args.more = 0;
 
-	icmp6_dst_gc(&gc_args.more);
+	gc_args.more = icmp6_dst_gc();
 
 	fib6_clean_all(net, fib6_age, 0, NULL);
 
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 615b328de25..86540b24b27 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -978,13 +978,12 @@ out:
 	return &rt->u.dst;
 }
 
-int icmp6_dst_gc(int *more)
+int icmp6_dst_gc(void)
 {
 	struct dst_entry *dst, *next, **pprev;
-	int freed;
+	int more = 0;
 
 	next = NULL;
-	freed = 0;
 
 	spin_lock_bh(&icmp6_dst_lock);
 	pprev = &icmp6_dst_gc_list;
@@ -993,16 +992,15 @@ int icmp6_dst_gc(int *more)
 		if (!atomic_read(&dst->__refcnt)) {
 			*pprev = dst->next;
 			dst_free(dst);
-			freed++;
 		} else {
 			pprev = &dst->next;
-			(*more)++;
+			++more;
 		}
 	}
 
 	spin_unlock_bh(&icmp6_dst_lock);
 
-	return freed;
+	return more;
 }
 
 static int ip6_dst_gc(struct dst_ops *ops)
-- 
cgit v1.2.3


From f0084a36d4d799c024a5211555334d56c91d236d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 22 Jul 2008 09:23:34 +0200
Subject: net 8390p: fix interface usage

various drivers were using the wrong APIs:

 drivers/built-in.o: In function `hp_probe1':
 hp.c:(.init.text+0xa280): undefined reference to `NS8390_init'

fixed via:

cd drivers/net/; sed -i 's/NS8390_/NS8390p_/g' \
  $(grep -l NS8390_ $(grep 8390p.o Makefile | cut -d' ' -f3 | \
      sed 's/.o$/.c/g'))

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/hp-plus.c | 2 +-
 drivers/net/hp.c      | 2 +-
 drivers/net/ne.c      | 2 +-
 drivers/net/ne2.c     | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
index c2c4f49d757..8239939554b 100644
--- a/drivers/net/hp-plus.c
+++ b/drivers/net/hp-plus.c
@@ -262,7 +262,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr)
 	}
 
 	outw(Perf_Page, ioaddr + HP_PAGING);
-	NS8390_init(dev, 0);
+	NS8390p_init(dev, 0);
 	/* Leave the 8390 and HP chip reset. */
 	outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION);
 
diff --git a/drivers/net/hp.c b/drivers/net/hp.c
index 8281209eded..0a8c64930ad 100644
--- a/drivers/net/hp.c
+++ b/drivers/net/hp.c
@@ -389,7 +389,7 @@ static void __init
 hp_init_card(struct net_device *dev)
 {
 	int irq = dev->irq;
-	NS8390_init(dev, 0);
+	NS8390p_init(dev, 0);
 	outb_p(irqmap[irq&0x0f] | HP_RUN,
 		   dev->base_addr - NIC_OFFSET + HP_CONFIGURE);
 	return;
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 14126973bd1..2fec6122c7f 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -355,7 +355,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
 	}
 
 	/* Read the 16 bytes of station address PROM.
-	   We must first initialize registers, similar to NS8390_init(eifdev, 0).
+	   We must first initialize registers, similar to NS8390p_init(eifdev, 0).
 	   We can't reliably read the SAPROM address without this.
 	   (I learned the hard way!). */
 	{
diff --git a/drivers/net/ne2.c b/drivers/net/ne2.c
index 8f725634692..332df75a9ab 100644
--- a/drivers/net/ne2.c
+++ b/drivers/net/ne2.c
@@ -404,7 +404,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
 
 	/* Read the 16 bytes of station address PROM.
 	   We must first initialize registers, similar to
-	   NS8390_init(eifdev, 0).
+	   NS8390p_init(eifdev, 0).
 	   We can't reliably read the SAPROM address without this.
 	   (I learned the hard way!). */
 	{
-- 
cgit v1.2.3


From 7830b22cbc5f5e804469b74a3fe0d3a8ed88ca31 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:00 -0700
Subject: netxen: cleanup unused variables/functions

o Reduce access to global arrays in data path.
o Remove duplicate/unused variables, unecessary alignment constraints.
o Use correct pci_dev instead of fallback device for consistent
  allocations.
o Disable ethtool set_eeprom functionality for now, it was only used
  for flashing firmware.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h          |  19 +--
 drivers/net/netxen/netxen_nic_ethtool.c  |   5 +-
 drivers/net/netxen/netxen_nic_hw.c       | 270 +++++++------------------------
 drivers/net/netxen/netxen_nic_init.c     |  88 +++-------
 drivers/net/netxen/netxen_nic_main.c     |  74 ++-------
 drivers/net/netxen/netxen_nic_phan_reg.h |  17 +-
 6 files changed, 113 insertions(+), 360 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index da4c4fb9706..149bb60b0c4 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -132,7 +132,6 @@
 #define RX_JUMBO_DMA_MAP_LEN	\
 	(MAX_RX_JUMBO_BUFFER_LENGTH - 2)
 #define RX_LRO_DMA_MAP_LEN		(MAX_RX_LRO_BUFFER_LENGTH - 2)
-#define NETXEN_ROM_ROUNDUP		0x80000000ULL
 
 /*
  * Maximum number of ring contexts
@@ -219,8 +218,6 @@ enum {
 #define MPORT_MULTI_FUNCTION_MODE 0x2222
 
 #include "netxen_nic_phan_reg.h"
-extern unsigned long long netxen_dma_mask;
-extern unsigned long last_schedule_time;
 
 /*
  * NetXen host-peg signal message structure
@@ -765,7 +762,6 @@ struct netxen_rx_buffer {
  * contains interrupt info as well shared hardware info.
  */
 struct netxen_hardware_context {
-	struct pci_dev *pdev;
 	void __iomem *pci_base0;
 	void __iomem *pci_base1;
 	void __iomem *pci_base2;
@@ -781,7 +777,6 @@ struct netxen_hardware_context {
 	u32 qg_linksup;
 	/* Address of cmd ring in Phantom */
 	struct cmd_desc_type0 *cmd_desc_head;
-	struct pci_dev *cmd_desc_pdev;
 	dma_addr_t cmd_desc_phys_addr;
 	struct netxen_adapter *adapter;
 	int pci_func;
@@ -816,9 +811,8 @@ struct netxen_adapter_stats {
 struct netxen_rcv_desc_ctx {
 	u32 flags;
 	u32 producer;
-	u32 rcv_pending;	/* Num of bufs posted in phantom */
 	dma_addr_t phys_addr;
-	struct pci_dev *phys_pdev;
+	u32 crb_rcv_producer;	/* reg offset */
 	struct rcv_desc *desc_head;	/* address of rx ring in Phantom */
 	u32 max_rx_desc_count;
 	u32 dma_size;
@@ -835,10 +829,9 @@ struct netxen_rcv_desc_ctx {
  */
 struct netxen_recv_context {
 	struct netxen_rcv_desc_ctx rcv_desc[NUM_RCV_DESC_RINGS];
-	u32 status_rx_producer;
 	u32 status_rx_consumer;
+	u32 crb_sts_consumer;	/* reg offset */
 	dma_addr_t rcv_status_desc_phys_addr;
-	struct pci_dev *rcv_status_desc_pdev;
 	struct status_desc *rcv_status_desc_head;
 };
 
@@ -854,7 +847,6 @@ struct netxen_dummy_dma {
 struct netxen_adapter {
 	struct netxen_hardware_context ahw;
 
-	struct netxen_adapter *master;
 	struct net_device *netdev;
 	struct pci_dev *pdev;
 	struct napi_struct napi;
@@ -873,6 +865,8 @@ struct netxen_adapter {
 	u32 cmd_producer;
 	__le32 *cmd_consumer;
 	u32 last_cmd_consumer;
+	u32 crb_addr_cmd_producer;
+	u32 crb_addr_cmd_consumer;
 
 	u32 max_tx_desc_count;
 	u32 max_rx_desc_count;
@@ -886,14 +880,12 @@ struct netxen_adapter {
 
 	struct netxen_adapter_stats stats;
 
-	u16 portno;
 	u16 link_speed;
 	u16 link_duplex;
 	u16 state;
 	u16 link_autoneg;
 	int rx_csum;
 	int status;
-	spinlock_t stats_lock;
 
 	struct netxen_cmd_buffer *cmd_buf_arr;	/* Command buffers for xmit */
 
@@ -908,7 +900,6 @@ struct netxen_adapter {
 
 	/* Context interface shared between card and host */
 	struct netxen_ring_ctx *ctx_desc;
-	struct pci_dev *ctx_desc_pdev;
 	dma_addr_t ctx_desc_phys_addr;
 	int intr_scheme;
 	int msi_mode;
@@ -1034,8 +1025,6 @@ int netxen_rom_se(struct netxen_adapter *adapter, int addr);
 
 /* Functions from netxen_nic_isr.c */
 void netxen_initialize_adapter_sw(struct netxen_adapter *adapter);
-void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr,
-		   struct pci_dev **used_dev);
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
 int netxen_init_firmware(struct netxen_adapter *adapter);
 void netxen_free_hw_resources(struct netxen_adapter *adapter);
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 723487bf200..99071c25376 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -427,6 +427,7 @@ netxen_nic_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 	return 0;
 }
 
+#if 0
 static int
 netxen_nic_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 			u8 * bytes)
@@ -447,7 +448,6 @@ netxen_nic_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 		}
 		printk(KERN_INFO "%s: flash unlocked. \n",
 			netxen_nic_driver_name);
-		last_schedule_time = jiffies;
 		ret = netxen_flash_erase_secondary(adapter);
 		if (ret != FLASH_SUCCESS) {
 			printk(KERN_ERR "%s: Flash erase failed.\n",
@@ -497,6 +497,7 @@ netxen_nic_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
 
 	return netxen_rom_fast_write_words(adapter, offset, bytes, eeprom->len);
 }
+#endif /* 0 */
 
 static void
 netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
@@ -745,7 +746,9 @@ struct ethtool_ops netxen_nic_ethtool_ops = {
 	.get_link = ethtool_op_get_link,
 	.get_eeprom_len = netxen_nic_get_eeprom_len,
 	.get_eeprom = netxen_nic_get_eeprom,
+#if 0
 	.set_eeprom = netxen_nic_set_eeprom,
+#endif
 	.get_ringparam = netxen_nic_get_ringparam,
 	.get_pauseparam = netxen_nic_get_pauseparam,
 	.set_pauseparam = netxen_nic_set_pauseparam,
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index c43d06b8de9..fa6d034c242 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -43,203 +43,61 @@ struct netxen_recv_crb recv_crb_registers[] = {
 	 * Instance 0.
 	 */
 	{
-	 /* rcv_desc_crb: */
-	 {
-	  {
-	   /* crb_rcv_producer_offset: */
-	   NETXEN_NIC_REG(0x100),
-	   /* crb_rcv_consumer_offset: */
-	   NETXEN_NIC_REG(0x104),
-	   /* crb_gloablrcv_ring: */
-	   NETXEN_NIC_REG(0x108),
-	   /* crb_rcv_ring_size */
-	   NETXEN_NIC_REG(0x10c),
-
-	   },
-	  /* Jumbo frames */
-	  {
-	   /* crb_rcv_producer_offset: */
-	   NETXEN_NIC_REG(0x110),
-	   /* crb_rcv_consumer_offset: */
-	   NETXEN_NIC_REG(0x114),
-	   /* crb_gloablrcv_ring: */
-	   NETXEN_NIC_REG(0x118),
-	   /* crb_rcv_ring_size */
-	   NETXEN_NIC_REG(0x11c),
-	   },
-	  /* LRO */
-	  {
-	   /* crb_rcv_producer_offset: */
-	   NETXEN_NIC_REG(0x120),
-	   /* crb_rcv_consumer_offset: */
-	   NETXEN_NIC_REG(0x124),
-	   /* crb_gloablrcv_ring: */
-	   NETXEN_NIC_REG(0x128),
-	   /* crb_rcv_ring_size */
-	   NETXEN_NIC_REG(0x12c),
-	   }
-	  },
-	 /* crb_rcvstatus_ring: */
-	 NETXEN_NIC_REG(0x130),
-	 /* crb_rcv_status_producer: */
-	 NETXEN_NIC_REG(0x134),
-	 /* crb_rcv_status_consumer: */
-	 NETXEN_NIC_REG(0x138),
-	 /* crb_rcvpeg_state: */
-	 NETXEN_NIC_REG(0x13c),
-	 /* crb_status_ring_size */
-	 NETXEN_NIC_REG(0x140),
-
-	 },
+		/* crb_rcv_producer: */
+		{
+			NETXEN_NIC_REG(0x100),
+			/* Jumbo frames */
+			NETXEN_NIC_REG(0x110),
+			/* LRO */
+			NETXEN_NIC_REG(0x120)
+		},
+		/* crb_sts_consumer: */
+		NETXEN_NIC_REG(0x138),
+	},
 	/*
 	 * Instance 1,
 	 */
 	{
-	 /* rcv_desc_crb: */
-	 {
-	  {
-	   /* crb_rcv_producer_offset: */
-	   NETXEN_NIC_REG(0x144),
-	   /* crb_rcv_consumer_offset: */
-	   NETXEN_NIC_REG(0x148),
-	   /* crb_globalrcv_ring: */
-	   NETXEN_NIC_REG(0x14c),
-	   /* crb_rcv_ring_size */
-	   NETXEN_NIC_REG(0x150),
-
-	   },
-	  /* Jumbo frames */
-	  {
-	   /* crb_rcv_producer_offset: */
-	   NETXEN_NIC_REG(0x154),
-	   /* crb_rcv_consumer_offset: */
-	   NETXEN_NIC_REG(0x158),
-	   /* crb_globalrcv_ring: */
-	   NETXEN_NIC_REG(0x15c),
-	   /* crb_rcv_ring_size */
-	   NETXEN_NIC_REG(0x160),
-	   },
-	  /* LRO */
-	  {
-	   /* crb_rcv_producer_offset: */
-	   NETXEN_NIC_REG(0x164),
-	   /* crb_rcv_consumer_offset: */
-	   NETXEN_NIC_REG(0x168),
-	   /* crb_globalrcv_ring: */
-	   NETXEN_NIC_REG(0x16c),
-	   /* crb_rcv_ring_size */
-	   NETXEN_NIC_REG(0x170),
-	   }
-
-	  },
-	 /* crb_rcvstatus_ring: */
-	 NETXEN_NIC_REG(0x174),
-	 /* crb_rcv_status_producer: */
-	 NETXEN_NIC_REG(0x178),
-	 /* crb_rcv_status_consumer: */
-	 NETXEN_NIC_REG(0x17c),
-	 /* crb_rcvpeg_state: */
-	 NETXEN_NIC_REG(0x180),
-	 /* crb_status_ring_size */
-	 NETXEN_NIC_REG(0x184),
-	 },
+		/* crb_rcv_producer: */
+		{
+			NETXEN_NIC_REG(0x144),
+			/* Jumbo frames */
+			NETXEN_NIC_REG(0x154),
+			/* LRO */
+			NETXEN_NIC_REG(0x164)
+		},
+		/* crb_sts_consumer: */
+		NETXEN_NIC_REG(0x17c),
+	},
 	/*
 	 * Instance 2,
 	 */
 	{
-	  {
-	    {
-	    /* crb_rcv_producer_offset: */
-	    NETXEN_NIC_REG(0x1d8),
-	    /* crb_rcv_consumer_offset: */
-	    NETXEN_NIC_REG(0x1dc),
-	    /* crb_gloablrcv_ring: */
-	    NETXEN_NIC_REG(0x1f0),
-	    /* crb_rcv_ring_size */
-	    NETXEN_NIC_REG(0x1f4),
-	    },
-	    /* Jumbo frames */
-	    {
-	    /* crb_rcv_producer_offset: */
-	    NETXEN_NIC_REG(0x1f8),
-	    /* crb_rcv_consumer_offset: */
-	    NETXEN_NIC_REG(0x1fc),
-	    /* crb_gloablrcv_ring: */
-	    NETXEN_NIC_REG(0x200),
-	    /* crb_rcv_ring_size */
-	    NETXEN_NIC_REG(0x204),
-	    },
-	    /* LRO */
-	    {
-	    /* crb_rcv_producer_offset: */
-	    NETXEN_NIC_REG(0x208),
-	    /* crb_rcv_consumer_offset: */
-	    NETXEN_NIC_REG(0x20c),
-	    /* crb_gloablrcv_ring: */
-	    NETXEN_NIC_REG(0x210),
-	    /* crb_rcv_ring_size */
-	    NETXEN_NIC_REG(0x214),
-	    }
-	  },
-	  /* crb_rcvstatus_ring: */
-	  NETXEN_NIC_REG(0x218),
-	  /* crb_rcv_status_producer: */
-	  NETXEN_NIC_REG(0x21c),
-	  /* crb_rcv_status_consumer: */
-	  NETXEN_NIC_REG(0x220),
-	  /* crb_rcvpeg_state: */
-	  NETXEN_NIC_REG(0x224),
-	  /* crb_status_ring_size */
-	  NETXEN_NIC_REG(0x228),
+		/* crb_rcv_producer: */
+		{
+			NETXEN_NIC_REG(0x1d8),
+			/* Jumbo frames */
+			NETXEN_NIC_REG(0x1f8),
+			/* LRO */
+			NETXEN_NIC_REG(0x208)
+		},
+		/* crb_sts_consumer: */
+		NETXEN_NIC_REG(0x220),
 	},
 	/*
 	 * Instance 3,
 	 */
 	{
-	  {
-	    {
-	    /* crb_rcv_producer_offset: */
-	    NETXEN_NIC_REG(0x22c),
-	    /* crb_rcv_consumer_offset: */
-	    NETXEN_NIC_REG(0x230),
-	    /* crb_gloablrcv_ring: */
-	    NETXEN_NIC_REG(0x234),
-	    /* crb_rcv_ring_size */
-	    NETXEN_NIC_REG(0x238),
-	    },
-	    /* Jumbo frames */
-	    {
-	    /* crb_rcv_producer_offset: */
-	    NETXEN_NIC_REG(0x23c),
-	    /* crb_rcv_consumer_offset: */
-	    NETXEN_NIC_REG(0x240),
-	    /* crb_gloablrcv_ring: */
-	    NETXEN_NIC_REG(0x244),
-	    /* crb_rcv_ring_size */
-	    NETXEN_NIC_REG(0x248),
-	    },
-	    /* LRO */
-	    {
-	    /* crb_rcv_producer_offset: */
-	    NETXEN_NIC_REG(0x24c),
-	    /* crb_rcv_consumer_offset: */
-	    NETXEN_NIC_REG(0x250),
-	    /* crb_gloablrcv_ring: */
-	    NETXEN_NIC_REG(0x254),
-	    /* crb_rcv_ring_size */
-	    NETXEN_NIC_REG(0x258),
-	    }
-	  },
-	  /* crb_rcvstatus_ring: */
-	  NETXEN_NIC_REG(0x25c),
-	  /* crb_rcv_status_producer: */
-	  NETXEN_NIC_REG(0x260),
-	  /* crb_rcv_status_consumer: */
-	  NETXEN_NIC_REG(0x264),
-	  /* crb_rcvpeg_state: */
-	  NETXEN_NIC_REG(0x268),
-	  /* crb_status_ring_size */
-	  NETXEN_NIC_REG(0x26c),
+		/* crb_rcv_producer: */
+		{
+			NETXEN_NIC_REG(0x22c),
+			/* Jumbo frames */
+			NETXEN_NIC_REG(0x23c),
+			/* LRO */
+			NETXEN_NIC_REG(0x24c)
+		},
+		/* crb_sts_consumer: */
+		NETXEN_NIC_REG(0x264),
 	},
 };
 
@@ -375,16 +233,12 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 		loops = 0;
 		state = 0;
 		/* Window 1 call */
-		state = readl(NETXEN_CRB_NORMALIZE(adapter,
-						   recv_crb_registers[ctx].
-						   crb_rcvpeg_state));
+		state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_RCVPEG_STATE));
 		while (state != PHAN_PEG_RCV_INITIALIZED && loops < 20) {
 			msleep(1);
 			/* Window 1 call */
 			state = readl(NETXEN_CRB_NORMALIZE(adapter,
-							   recv_crb_registers
-							   [ctx].
-							   crb_rcvpeg_state));
+					CRB_RCVPEG_STATE));
 			loops++;
 		}
 		if (loops >= 20) {
@@ -399,11 +253,9 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 	adapter->msi_mode = readl(
 		NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW));
 
-	addr = netxen_alloc(adapter->ahw.pdev,
-			    sizeof(struct netxen_ring_ctx) +
-			    sizeof(uint32_t),
-			    (dma_addr_t *) & adapter->ctx_desc_phys_addr,
-			    &adapter->ctx_desc_pdev);
+	addr = pci_alloc_consistent(adapter->pdev,
+			    sizeof(struct netxen_ring_ctx) + sizeof(uint32_t),
+			    &adapter->ctx_desc_phys_addr);
 
 	if (addr == NULL) {
 		DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
@@ -419,11 +271,10 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 	adapter->cmd_consumer = (__le32 *) (((char *)addr) +
 					      sizeof(struct netxen_ring_ctx));
 
-	addr = netxen_alloc(adapter->ahw.pdev,
+	addr = pci_alloc_consistent(adapter->pdev,
 			    sizeof(struct cmd_desc_type0) *
 			    adapter->max_tx_desc_count,
-			    (dma_addr_t *) & hw->cmd_desc_phys_addr,
-			    &adapter->ahw.cmd_desc_pdev);
+			    &hw->cmd_desc_phys_addr);
 
 	if (addr == NULL) {
 		DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
@@ -443,10 +294,9 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 
 		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
 			rcv_desc = &recv_ctx->rcv_desc[ring];
-			addr = netxen_alloc(adapter->ahw.pdev,
+			addr = pci_alloc_consistent(adapter->pdev,
 					    RCV_DESC_RINGSIZE,
-					    &rcv_desc->phys_addr,
-					    &rcv_desc->phys_pdev);
+					    &rcv_desc->phys_addr);
 			if (addr == NULL) {
 				DPRINTK(ERR, "bad return from "
 					"pci_alloc_consistent\n");
@@ -459,11 +309,13 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 			    cpu_to_le64(rcv_desc->phys_addr);
 			adapter->ctx_desc->rcv_ctx[ring].rcv_ring_size =
 			    cpu_to_le32(rcv_desc->max_rx_desc_count);
+			rcv_desc->crb_rcv_producer =
+				    recv_crb_registers[adapter->portnum].
+				    crb_rcv_producer[ring];
 		}
 
-		addr = netxen_alloc(adapter->ahw.pdev, STATUS_DESC_RINGSIZE,
-				    &recv_ctx->rcv_status_desc_phys_addr,
-				    &recv_ctx->rcv_status_desc_pdev);
+		addr = pci_alloc_consistent(adapter->pdev, STATUS_DESC_RINGSIZE,
+				    &recv_ctx->rcv_status_desc_phys_addr);
 		if (addr == NULL) {
 			DPRINTK(ERR, "bad return from"
 				" pci_alloc_consistent\n");
@@ -476,6 +328,8 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 		    cpu_to_le64(recv_ctx->rcv_status_desc_phys_addr);
 		adapter->ctx_desc->sts_ring_size =
 		    cpu_to_le32(adapter->max_rx_desc_count);
+		recv_ctx->crb_sts_consumer =
+			recv_crb_registers[adapter->portnum].crb_sts_consumer;
 
 	}
 	/* Window = 1 */
@@ -496,7 +350,7 @@ void netxen_free_hw_resources(struct netxen_adapter *adapter)
 	int ctx, ring;
 
 	if (adapter->ctx_desc != NULL) {
-		pci_free_consistent(adapter->ctx_desc_pdev,
+		pci_free_consistent(adapter->pdev,
 				    sizeof(struct netxen_ring_ctx) +
 				    sizeof(uint32_t),
 				    adapter->ctx_desc,
@@ -505,7 +359,7 @@ void netxen_free_hw_resources(struct netxen_adapter *adapter)
 	}
 
 	if (adapter->ahw.cmd_desc_head != NULL) {
-		pci_free_consistent(adapter->ahw.cmd_desc_pdev,
+		pci_free_consistent(adapter->pdev,
 				    sizeof(struct cmd_desc_type0) *
 				    adapter->max_tx_desc_count,
 				    adapter->ahw.cmd_desc_head,
@@ -519,7 +373,7 @@ void netxen_free_hw_resources(struct netxen_adapter *adapter)
 			rcv_desc = &recv_ctx->rcv_desc[ring];
 
 			if (rcv_desc->desc_head != NULL) {
-				pci_free_consistent(rcv_desc->phys_pdev,
+				pci_free_consistent(adapter->pdev,
 						    RCV_DESC_RINGSIZE,
 						    rcv_desc->desc_head,
 						    rcv_desc->phys_addr);
@@ -528,7 +382,7 @@ void netxen_free_hw_resources(struct netxen_adapter *adapter)
 		}
 
 		if (recv_ctx->rcv_status_desc_head != NULL) {
-			pci_free_consistent(recv_ctx->rcv_status_desc_pdev,
+			pci_free_consistent(adapter->pdev,
 					    STATUS_DESC_RINGSIZE,
 					    recv_ctx->rcv_status_desc_head,
 					    recv_ctx->
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 70d1b22ced2..37fd6bc93eb 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -42,8 +42,6 @@ struct crb_addr_pair {
 	u32 data;
 };
 
-unsigned long last_schedule_time;
-
 #define NETXEN_MAX_CRB_XFORM 60
 static unsigned int crb_addr_xform[NETXEN_MAX_CRB_XFORM];
 #define NETXEN_ADDR_ERROR (0xffffffff)
@@ -155,24 +153,6 @@ int netxen_init_firmware(struct netxen_adapter *adapter)
 	return err;
 }
 
-#define NETXEN_ADDR_LIMIT 0xffffffffULL
-
-void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr,
-		   struct pci_dev **used_dev)
-{
-	void *addr;
-
-	addr = pci_alloc_consistent(pdev, sz, ptr);
-	if ((unsigned long long)(*ptr) < NETXEN_ADDR_LIMIT) {
-		*used_dev = pdev;
-		return addr;
-	}
-	pci_free_consistent(pdev, sz, addr, *ptr);
-	addr = pci_alloc_consistent(NULL, sz, ptr);
-	*used_dev = NULL;
-	return addr;
-}
-
 void netxen_initialize_adapter_sw(struct netxen_adapter *adapter)
 {
 	int ctxid, ring;
@@ -270,7 +250,9 @@ static u32 netxen_decode_crb_addr(u32 addr)
 
 static long rom_max_timeout = 100;
 static long rom_lock_timeout = 10000;
+#if 0
 static long rom_write_timeout = 700;
+#endif
 
 static int rom_lock(struct netxen_adapter *adapter)
 {
@@ -319,6 +301,7 @@ static int netxen_wait_rom_done(struct netxen_adapter *adapter)
 	return 0;
 }
 
+#if 0
 static int netxen_rom_wren(struct netxen_adapter *adapter)
 {
 	/* Set write enable latch in ROM status register */
@@ -348,6 +331,7 @@ static int netxen_do_rom_rdsr(struct netxen_adapter *adapter)
 	}
 	return netxen_rdcrbreg(adapter, NETXEN_ROMUSB_ROM_RDATA);
 }
+#endif
 
 static void netxen_rom_unlock(struct netxen_adapter *adapter)
 {
@@ -358,6 +342,7 @@ static void netxen_rom_unlock(struct netxen_adapter *adapter)
 
 }
 
+#if 0
 static int netxen_rom_wip_poll(struct netxen_adapter *adapter)
 {
 	long timeout = 0;
@@ -393,6 +378,7 @@ static int do_rom_fast_write(struct netxen_adapter *adapter, int addr,
 
 	return netxen_rom_wip_poll(adapter);
 }
+#endif
 
 static int do_rom_fast_read(struct netxen_adapter *adapter,
 			    int addr, int *valp)
@@ -475,7 +461,6 @@ int netxen_rom_fast_write(struct netxen_adapter *adapter, int addr, int data)
 	netxen_rom_unlock(adapter);
 	return ret;
 }
-#endif  /*  0  */
 
 static int do_rom_fast_write_words(struct netxen_adapter *adapter,
 				   int addr, u8 *bytes, size_t size)
@@ -740,13 +725,12 @@ int netxen_flash_unlock(struct netxen_adapter *adapter)
 
 	return ret;
 }
+#endif  /*  0  */
 
 #define NETXEN_BOARDTYPE		0x4008
 #define NETXEN_BOARDNUM 		0x400c
 #define NETXEN_CHIPNUM			0x4010
 #define NETXEN_ROMBUS_RESET		0xFFFFFFFF
-#define NETXEN_ROM_FIRST_BARRIER	0x800000000ULL
-#define NETXEN_ROM_FOUND_INIT		0x400
 
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 {
@@ -776,10 +760,9 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 			printk("Could not read chip number\n");
 	}
 
-	if (netxen_rom_fast_read(adapter, 0, &n) == 0
-	    && (n & NETXEN_ROM_FIRST_BARRIER)) {
-		n &= ~NETXEN_ROM_ROUNDUP;
-		if (n < NETXEN_ROM_FOUND_INIT) {
+	if (netxen_rom_fast_read(adapter, 0, &n) == 0 && (n & 0x80000000)) {
+		n &= ~0x80000000;
+		if (n < 0x400) {
 			if (verbose)
 				printk("%s: %d CRB init values found"
 				       " in ROM.\n", netxen_nic_driver_name, n);
@@ -829,16 +812,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 				buf[i].data = NETXEN_NIC_XDMA_RESET;
 			}
 
-			if (ADDR_IN_WINDOW1(off)) {
-				writel(buf[i].data,
-				       NETXEN_CRB_NORMALIZE(adapter, off));
-			} else {
-				netxen_nic_pci_change_crbwindow(adapter, 0);
-				writel(buf[i].data,
-				       pci_base_offset(adapter, off));
+			netxen_nic_hw_write_wx(adapter, off, &buf[i].data, 4);
 
-				netxen_nic_pci_change_crbwindow(adapter, 1);
-			}
 			if (init_delay == 1) {
 				msleep(1000);
 				init_delay = 0;
@@ -897,7 +872,7 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 	uint32_t lo;
 
 	adapter->dummy_dma.addr =
-	    pci_alloc_consistent(adapter->ahw.pdev,
+	    pci_alloc_consistent(adapter->pdev,
 				 NETXEN_HOST_DUMMY_DMA_SIZE,
 				 &adapter->dummy_dma.phys_addr);
 	if (adapter->dummy_dma.addr == NULL) {
@@ -931,7 +906,7 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter)
 		} while (--i);
 
 		if (i) {
-			pci_free_consistent(adapter->ahw.pdev,
+			pci_free_consistent(adapter->pdev,
 				    NETXEN_HOST_DUMMY_DMA_SIZE,
 				    adapter->dummy_dma.addr,
 				    adapter->dummy_dma.phys_addr);
@@ -1104,8 +1079,6 @@ static void netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
 	ret = netif_receive_skb(skb);
 	netdev->last_rx = jiffies;
 
-	rcv_desc->rcv_pending--;
-
 	/*
 	 * We just consumed one buffer so post a buffer.
 	 */
@@ -1125,7 +1098,6 @@ u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max)
 	struct status_desc *desc_head = recv_ctx->rcv_status_desc_head;
 	struct status_desc *desc;	/* used to read status desc here */
 	u32 consumer = recv_ctx->status_rx_consumer;
-	u32 producer = 0;
 	int count = 0, ring;
 
 	while (count < max) {
@@ -1146,13 +1118,10 @@ u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max)
 	/* update the consumer index in phantom */
 	if (count) {
 		recv_ctx->status_rx_consumer = consumer;
-		recv_ctx->status_rx_producer = producer;
 
 		/* Window = 1 */
-		writel(consumer,
-		       NETXEN_CRB_NORMALIZE(adapter,
-				    recv_crb_registers[adapter->portnum].
-					    crb_rcv_status_consumer));
+		writel(consumer, NETXEN_CRB_NORMALIZE(adapter,
+					recv_ctx->crb_sts_consumer));
 	}
 
 	return count;
@@ -1231,7 +1200,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
  */
 void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 {
-	struct pci_dev *pdev = adapter->ahw.pdev;
+	struct pci_dev *pdev = adapter->pdev;
 	struct sk_buff *skb;
 	struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctx]);
 	struct netxen_rcv_desc_ctx *rcv_desc = NULL;
@@ -1294,16 +1263,11 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 	/* if we did allocate buffers, then write the count to Phantom */
 	if (count) {
 		rcv_desc->begin_alloc = index;
-		rcv_desc->rcv_pending += count;
 		rcv_desc->producer = producer;
 			/* Window = 1 */
-			writel((producer - 1) &
-			       (rcv_desc->max_rx_desc_count - 1),
-			       NETXEN_CRB_NORMALIZE(adapter,
-						    recv_crb_registers[
-						    adapter->portnum].
-						    rcv_desc_crb[ringid].
-						    crb_rcv_producer_offset));
+		writel((producer - 1) & (rcv_desc->max_rx_desc_count - 1),
+		       NETXEN_CRB_NORMALIZE(adapter,
+			       rcv_desc->crb_rcv_producer));
 			/*
 			 * Write a doorbell msg to tell phanmon of change in
 			 * receive ring producer
@@ -1325,7 +1289,7 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 static void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 					uint32_t ctx, uint32_t ringid)
 {
-	struct pci_dev *pdev = adapter->ahw.pdev;
+	struct pci_dev *pdev = adapter->pdev;
 	struct sk_buff *skb;
 	struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctx]);
 	struct netxen_rcv_desc_ctx *rcv_desc = NULL;
@@ -1370,7 +1334,6 @@ static void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 		pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
 		pdesc->buffer_length = cpu_to_le32(rcv_desc->dma_size);
 		pdesc->addr_buffer = cpu_to_le64(buffer->dma);
-		DPRINTK(INFO, "done writing descripter\n");
 		producer =
 		    get_next_index(producer, rcv_desc->max_rx_desc_count);
 		index = get_next_index(index, rcv_desc->max_rx_desc_count);
@@ -1380,16 +1343,11 @@ static void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 	/* if we did allocate buffers, then write the count to Phantom */
 	if (count) {
 		rcv_desc->begin_alloc = index;
-		rcv_desc->rcv_pending += count;
 		rcv_desc->producer = producer;
 			/* Window = 1 */
-			writel((producer - 1) &
-			       (rcv_desc->max_rx_desc_count - 1),
-			       NETXEN_CRB_NORMALIZE(adapter,
-						    recv_crb_registers[
-						    adapter->portnum].
-						    rcv_desc_crb[ringid].
-						    crb_rcv_producer_offset));
+		writel((producer - 1) & (rcv_desc->max_rx_desc_count - 1),
+		       NETXEN_CRB_NORMALIZE(adapter,
+			       rcv_desc->crb_rcv_producer));
 			wmb();
 	}
 }
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 63cd67b931e..91b02ebc9a1 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -108,66 +108,30 @@ static struct workqueue_struct *netxen_workq;
 
 static void netxen_watchdog(unsigned long);
 
+static uint32_t crb_cmd_producer[4] = {
+	CRB_CMD_PRODUCER_OFFSET, CRB_CMD_PRODUCER_OFFSET_1,
+	CRB_CMD_PRODUCER_OFFSET_2, CRB_CMD_PRODUCER_OFFSET_3
+};
+
 static void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
 					   uint32_t crb_producer)
 {
-	switch (adapter->portnum) {
-		case 0:
-			writel(crb_producer, NETXEN_CRB_NORMALIZE
-					(adapter, CRB_CMD_PRODUCER_OFFSET));
-			return;
-		case 1:
-			writel(crb_producer, NETXEN_CRB_NORMALIZE
-					(adapter, CRB_CMD_PRODUCER_OFFSET_1));
-			return;
-		case 2:
-			writel(crb_producer, NETXEN_CRB_NORMALIZE
-					(adapter, CRB_CMD_PRODUCER_OFFSET_2));
-			return;
-		case 3:
-			writel(crb_producer, NETXEN_CRB_NORMALIZE
-					(adapter, CRB_CMD_PRODUCER_OFFSET_3));
-			return;
-		default:
-			printk(KERN_WARNING "We tried to update "
-					"CRB_CMD_PRODUCER_OFFSET for invalid "
-					"PCI function id %d\n",
-					adapter->portnum);
-			return;
-	}
+	writel(crb_producer, NETXEN_CRB_NORMALIZE(adapter,
+				adapter->crb_addr_cmd_producer));
 }
 
+static uint32_t crb_cmd_consumer[4] = {
+	CRB_CMD_CONSUMER_OFFSET, CRB_CMD_CONSUMER_OFFSET_1,
+	CRB_CMD_CONSUMER_OFFSET_2, CRB_CMD_CONSUMER_OFFSET_3
+};
+
 static void netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter,
 					   u32 crb_consumer)
 {
-	switch (adapter->portnum) {
-		case 0:
-			writel(crb_consumer, NETXEN_CRB_NORMALIZE
-				(adapter, CRB_CMD_CONSUMER_OFFSET));
-			return;
-		case 1:
-			writel(crb_consumer, NETXEN_CRB_NORMALIZE
-				(adapter, CRB_CMD_CONSUMER_OFFSET_1));
-			return;
-		case 2:
-			writel(crb_consumer, NETXEN_CRB_NORMALIZE
-				(adapter, CRB_CMD_CONSUMER_OFFSET_2));
-			return;
-		case 3:
-			writel(crb_consumer, NETXEN_CRB_NORMALIZE
-				(adapter, CRB_CMD_CONSUMER_OFFSET_3));
-			return;
-		default:
-			printk(KERN_WARNING "We tried to update "
-					"CRB_CMD_PRODUCER_OFFSET for invalid "
-					"PCI function id %d\n",
-					adapter->portnum);
-			return;
-	}
+	writel(crb_consumer, NETXEN_CRB_NORMALIZE(adapter,
+				adapter->crb_addr_cmd_consumer));
 }
 
-#define	ADAPTER_LIST_SIZE 12
-
 static uint32_t msi_tgt_status[4] = {
 	ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1,
 	ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3
@@ -334,7 +298,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	adapter = netdev->priv;
 
-	adapter->ahw.pdev = pdev;
 	adapter->ahw.pci_func  = pci_func_id;
 
 	/* remap phys address */
@@ -552,12 +515,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->watchdog_timer.function = &netxen_watchdog;
 	adapter->watchdog_timer.data = (unsigned long)adapter;
 	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
-	adapter->ahw.pdev = pdev;
 	adapter->ahw.revision_id = pdev->revision;
 
 	/* make sure Window == 1 */
 	netxen_nic_pci_change_crbwindow(adapter, 1);
 
+	adapter->crb_addr_cmd_producer = crb_cmd_producer[adapter->portnum];
+	adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum];
 	netxen_nic_update_cmd_producer(adapter, 0);
 	netxen_nic_update_cmd_consumer(adapter, 0);
 	writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_CMD_ADDR_LO));
@@ -816,7 +780,7 @@ static int netxen_nic_open(struct net_device *netdev)
 			for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++)
 				netxen_post_rx_buffers(adapter, ctx, ring);
 		}
-		adapter->irq = adapter->ahw.pdev->irq;
+		adapter->irq = adapter->pdev->irq;
 		if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
 			handler = netxen_msi_intr;
 		else {
@@ -1220,10 +1184,6 @@ module_init(netxen_init_module);
 
 static void __exit netxen_exit_module(void)
 {
-	/*
-	 * Wait for some time to allow the dma to drain, if any.
-	 */
-	msleep(100);
 	pci_unregister_driver(&netxen_driver);
 	destroy_workqueue(netxen_workq);
 }
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index a566b50f36f..db2202aeb0d 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -98,6 +98,7 @@
 #define CRB_JUMBO_BUFFER_PROD       NETXEN_NIC_REG(0xf4)
 #define CRB_JUMBO_BUFFER_CONS       NETXEN_NIC_REG(0xf8)
 
+#define CRB_RCVPEG_STATE            NETXEN_NIC_REG(0x13c)
 #define CRB_CMD_PRODUCER_OFFSET_1   NETXEN_NIC_REG(0x1ac)
 #define CRB_CMD_CONSUMER_OFFSET_1   NETXEN_NIC_REG(0x1b0)
 #define CRB_CMD_PRODUCER_OFFSET_2   NETXEN_NIC_REG(0x1b8)
@@ -147,25 +148,13 @@
 #define nx_get_temp_state(x)		((x) & 0xffff)
 #define nx_encode_temp(val, state)	(((val) << 16) | (state))
 
-/* CRB registers per Rcv Descriptor ring */
-struct netxen_rcv_desc_crb {
-	u32 crb_rcv_producer_offset __attribute__ ((aligned(512)));
-	u32 crb_rcv_consumer_offset;
-	u32 crb_globalrcv_ring;
-	u32 crb_rcv_ring_size;
-};
-
 /*
  * CRB registers used by the receive peg logic.
  */
 
 struct netxen_recv_crb {
-	struct netxen_rcv_desc_crb rcv_desc_crb[NUM_RCV_DESC_RINGS];
-	u32 crb_rcvstatus_ring;
-	u32 crb_rcv_status_producer;
-	u32 crb_rcv_status_consumer;
-	u32 crb_rcvpeg_state;
-	u32 crb_status_ring_size;
+	u32 crb_rcv_producer[NUM_RCV_DESC_RINGS];
+	u32 crb_sts_consumer;
 };
 
 extern struct netxen_recv_crb recv_crb_registers[];
-- 
cgit v1.2.3


From 623621b07ebc5b72e0bdfa4a50bbb28f4587de0c Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:01 -0700
Subject: netxen: hw multicast filtering

Enable multicast address filtering capabilities in the hardware.
Upto 16 multicast addresses can be programmed for each physical
port. Support "allmulti" mode, if enabled.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h      |   4 +-
 drivers/net/netxen/netxen_nic_hdr.h  |   3 +
 drivers/net/netxen/netxen_nic_hw.c   | 133 ++++++++++++++++++++++++++++++++---
 drivers/net/netxen/netxen_nic_hw.h   |  39 +---------
 drivers/net/netxen/netxen_nic_init.c |   2 -
 drivers/net/netxen/netxen_nic_main.c |  10 +++
 drivers/net/netxen/netxen_nic_niu.c  |   5 ++
 7 files changed, 147 insertions(+), 49 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 149bb60b0c4..fa1fbab6562 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -856,6 +856,9 @@ struct netxen_adapter {
 	int portnum;
 	u8 physical_port;
 
+	uint8_t		mc_enabled;
+	uint8_t		max_mc_count;
+
 	struct work_struct watchdog_task;
 	struct timer_list watchdog_timer;
 	struct work_struct  tx_timeout_task;
@@ -909,7 +912,6 @@ struct netxen_adapter {
 	int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t);
 	int (*set_mtu) (struct netxen_adapter *, int);
 	int (*set_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t);
-	int (*unset_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t);
 	int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
 	int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
 	int (*init_port) (struct netxen_adapter *, int);
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 24d027e29c4..545180bf3be 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -550,6 +550,9 @@ enum {
 #define NETXEN_MULTICAST_ADDR_HI_2	(NETXEN_CRB_NIU + 0x1018)
 #define NETXEN_MULTICAST_ADDR_HI_3	(NETXEN_CRB_NIU + 0x101c)
 
+#define NETXEN_UNICAST_ADDR_BASE	(NETXEN_CRB_NIU + 0x1080)
+#define	NETXEN_MULTICAST_ADDR_BASE	(NETXEN_CRB_NIU + 0x1100)
+
 #define	NETXEN_NIU_GB_MAC_CONFIG_0(I)		\
 	(NETXEN_CRB_NIU + 0x30000 + (I)*0x10000)
 #define	NETXEN_NIU_GB_MAC_CONFIG_1(I)		\
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index fa6d034c242..93466ec6407 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -154,7 +154,6 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p)
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 
-	DPRINTK(INFO, "valid ether addr\n");
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 
 	if (adapter->macaddr_set)
@@ -163,6 +162,91 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p)
 	return 0;
 }
 
+#define NETXEN_UNICAST_ADDR(port, index) \
+	(NETXEN_UNICAST_ADDR_BASE+(port*32)+(index*8))
+#define NETXEN_MCAST_ADDR(port, index) \
+	(NETXEN_MULTICAST_ADDR_BASE+(port*0x80)+(index*8))
+#define MAC_HI(addr) \
+	((addr[2] << 16) | (addr[1] << 8) | (addr[0]))
+#define MAC_LO(addr) \
+	((addr[5] << 16) | (addr[4] << 8) | (addr[3]))
+
+static int
+netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter)
+{
+	u32	val = 0;
+	u16 port = adapter->physical_port;
+	u8 *addr = adapter->netdev->dev_addr;
+
+	if (adapter->mc_enabled)
+		return 0;
+
+	netxen_nic_hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	val |= (1UL << (28+port));
+	netxen_nic_hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+
+	/* add broadcast addr to filter */
+	val = 0xffffff;
+	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
+	netxen_crb_writelit_adapter(adapter,
+			NETXEN_UNICAST_ADDR(port, 0)+4, val);
+
+	/* add station addr to filter */
+	val = MAC_HI(addr);
+	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 1), val);
+	val = MAC_LO(addr);
+	netxen_crb_writelit_adapter(adapter,
+			NETXEN_UNICAST_ADDR(port, 1)+4, val);
+
+	adapter->mc_enabled = 1;
+	return 0;
+}
+
+static int
+netxen_nic_disable_mcast_filter(struct netxen_adapter *adapter)
+{
+	u32	val = 0;
+	u16 port = adapter->physical_port;
+	u8 *addr = adapter->netdev->dev_addr;
+
+	if (!adapter->mc_enabled)
+		return 0;
+
+	netxen_nic_hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	val &= ~(1UL << (28+port));
+	netxen_nic_hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+
+	val = MAC_HI(addr);
+	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
+	val = MAC_LO(addr);
+	netxen_crb_writelit_adapter(adapter,
+			NETXEN_UNICAST_ADDR(port, 0)+4, val);
+
+	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 1), 0);
+	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 1)+4, 0);
+
+	adapter->mc_enabled = 0;
+	return 0;
+}
+
+static int
+netxen_nic_set_mcast_addr(struct netxen_adapter *adapter,
+		int index, u8 *addr)
+{
+	u32 hi = 0, lo = 0;
+	u16 port = adapter->physical_port;
+
+	lo = MAC_LO(addr);
+	hi = MAC_HI(addr);
+
+	netxen_crb_writelit_adapter(adapter,
+			NETXEN_MCAST_ADDR(port, index), hi);
+	netxen_crb_writelit_adapter(adapter,
+			NETXEN_MCAST_ADDR(port, index)+4, lo);
+
+	return 0;
+}
+
 /*
  * netxen_nic_set_multi - Multicast
  */
@@ -170,17 +254,48 @@ void netxen_nic_set_multi(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	struct dev_mc_list *mc_ptr;
+	u8 null_addr[6];
+	int index = 0;
+
+	memset(null_addr, 0, 6);
 
-	mc_ptr = netdev->mc_list;
 	if (netdev->flags & IFF_PROMISC) {
-		if (adapter->set_promisc)
-			adapter->set_promisc(adapter,
-					     NETXEN_NIU_PROMISC_MODE);
-	} else {
-		if (adapter->unset_promisc)
-			adapter->unset_promisc(adapter,
-					       NETXEN_NIU_NON_PROMISC_MODE);
+
+		adapter->set_promisc(adapter,
+				NETXEN_NIU_PROMISC_MODE);
+
+		/* Full promiscuous mode */
+		netxen_nic_disable_mcast_filter(adapter);
+
+		return;
+	}
+
+	if (netdev->mc_count == 0) {
+		adapter->set_promisc(adapter,
+				NETXEN_NIU_NON_PROMISC_MODE);
+		netxen_nic_disable_mcast_filter(adapter);
+		return;
+	}
+
+	adapter->set_promisc(adapter, NETXEN_NIU_ALLMULTI_MODE);
+	if (netdev->flags & IFF_ALLMULTI ||
+			netdev->mc_count > adapter->max_mc_count) {
+		netxen_nic_disable_mcast_filter(adapter);
+		return;
 	}
+
+	netxen_nic_enable_mcast_filter(adapter);
+
+	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next, index++)
+		netxen_nic_set_mcast_addr(adapter, index, mc_ptr->dmi_addr);
+
+	if (index != netdev->mc_count)
+		printk(KERN_WARNING "%s: %s multicast address count mismatch\n",
+			netxen_nic_driver_name, netdev->name);
+
+	/* Clear out remaining addresses */
+	for (; index < adapter->max_mc_count; index++)
+		netxen_nic_set_mcast_addr(adapter, index, null_addr);
 }
 
 /*
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index a3ea1dd98c4..90dd0579643 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -432,7 +432,8 @@ typedef enum {
 /* Promiscous mode options (GbE mode only) */
 typedef enum {
 	NETXEN_NIU_PROMISC_MODE = 0,
-	NETXEN_NIU_NON_PROMISC_MODE
+	NETXEN_NIU_NON_PROMISC_MODE,
+	NETXEN_NIU_ALLMULTI_MODE
 } netxen_niu_prom_mode_t;
 
 /*
@@ -478,42 +479,6 @@ typedef enum {
 #define netxen_xg_soft_reset(config_word)	\
 		((config_word) |= 1 << 4)
 
-/*
- * MAC Control Register
- *
- * Bit 0-1   : id_pool0
- * Bit 2     : enable_xtnd0
- * Bit 4-5   : id_pool1
- * Bit 6     : enable_xtnd1
- * Bit 8-9   : id_pool2
- * Bit 10    : enable_xtnd2
- * Bit 12-13 : id_pool3
- * Bit 14    : enable_xtnd3
- * Bit 24-25 : mode_select
- * Bit 28-31 : enable_pool
- */
-
-#define netxen_nic_mcr_set_id_pool0(config, val)	\
-		((config) |= ((val) &0x03))
-#define netxen_nic_mcr_set_enable_xtnd0(config)	\
-		((config) |= 1 << 3)
-#define netxen_nic_mcr_set_id_pool1(config, val)	\
-		((config) |= (((val) & 0x03) << 4))
-#define netxen_nic_mcr_set_enable_xtnd1(config)	\
-		((config) |= 1 << 6)
-#define netxen_nic_mcr_set_id_pool2(config, val)	\
-		((config) |= (((val) & 0x03) << 8))
-#define netxen_nic_mcr_set_enable_xtnd2(config)	\
-		((config) |= 1 << 10)
-#define netxen_nic_mcr_set_id_pool3(config, val)	\
-		((config) |= (((val) & 0x03) << 12))
-#define netxen_nic_mcr_set_enable_xtnd3(config)	\
-		((config) |= 1 << 14)
-#define netxen_nic_mcr_set_mode_select(config, val)	\
-		((config) |= (((val) & 0x03) << 24))
-#define netxen_nic_mcr_set_enable_pool(config, val)	\
-		((config) |= (((val) & 0x0f) << 28))
-
 /* Set promiscuous mode for a GbE interface */
 int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 				    netxen_niu_prom_mode_t mode);
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 37fd6bc93eb..e35f1a4b4eb 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -195,7 +195,6 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 		adapter->macaddr_set = netxen_niu_macaddr_set;
 		adapter->set_mtu = netxen_nic_set_mtu_gb;
 		adapter->set_promisc = netxen_niu_set_promiscuous_mode;
-		adapter->unset_promisc = netxen_niu_set_promiscuous_mode;
 		adapter->phy_read = netxen_niu_gbe_phy_read;
 		adapter->phy_write = netxen_niu_gbe_phy_write;
 		adapter->init_niu = netxen_nic_init_niu_gb;
@@ -212,7 +211,6 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 		adapter->set_mtu = netxen_nic_set_mtu_xgb;
 		adapter->init_port = netxen_niu_xg_init_port;
 		adapter->set_promisc = netxen_niu_xg_set_promiscuous_mode;
-		adapter->unset_promisc = netxen_niu_xg_set_promiscuous_mode;
 		adapter->stop_port = netxen_niu_disable_xg_port;
 		break;
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 91b02ebc9a1..0ec6e7ebf90 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -377,6 +377,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->portnum = pci_func_id;
 	adapter->status   &= ~NETXEN_NETDEV_STATUS;
 	adapter->rx_csum = 1;
+	adapter->max_mc_count = 16;
+	adapter->mc_enabled = 0;
 
 	netdev->open		   = netxen_nic_open;
 	netdev->stop		   = netxen_nic_close;
@@ -589,6 +591,14 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			msleep(1);
 			netxen_load_firmware(adapter);
 			netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+
+			/* Initialize multicast addr pool owners */
+			val = 0x7654;
+			if (adapter->ahw.board_type == NETXEN_NIC_XGBE)
+				val |= 0x0f000000;
+			netxen_crb_writelit_adapter(adapter,
+					NETXEN_MAC_ADDR_CNTL_REG, val);
+
 		}
 
 		/* clear the register for future unloads/loads */
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index a3bc7cc67a6..d9664a0e08b 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -909,6 +909,11 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 	else
 		reg = (reg & ~0x2000UL);
 
+	if (mode == NETXEN_NIU_ALLMULTI_MODE)
+		reg = (reg | 0x1000UL);
+	else
+		reg = (reg & ~0x1000UL);
+
 	netxen_crb_writelit_adapter(adapter,
 		NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
 
-- 
cgit v1.2.3


From e4c93c817ce650401db42db6c869cf7688217ff4 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:02 -0700
Subject: netxen: add defs for new chip/boards

Add macros for new chip revision and board configurations.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h          |  65 +++++++--
 drivers/net/netxen/netxen_nic_ethtool.c  |  12 ++
 drivers/net/netxen/netxen_nic_hdr.h      | 242 +++++++++++++++++++++++++++++--
 drivers/net/netxen/netxen_nic_hw.c       |  65 ++++-----
 drivers/net/netxen/netxen_nic_init.c     |   3 +-
 drivers/net/netxen/netxen_nic_main.c     |   6 +-
 drivers/net/netxen/netxen_nic_phan_reg.h |   8 +-
 7 files changed, 331 insertions(+), 70 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index fa1fbab6562..acc7d79457d 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -111,6 +111,13 @@
 
 #define NX_P2_C0		0x24
 #define NX_P2_C1		0x25
+#define NX_P3_A0		0x30
+#define NX_P3_A2		0x30
+#define NX_P3_B0		0x40
+#define NX_P3_B1		0x41
+
+#define NX_IS_REVISION_P2(REVISION)     (REVISION <= NX_P2_C1)
+#define NX_IS_REVISION_P3(REVISION)     (REVISION >= NX_P3_A0)
 
 #define FIRST_PAGE_GROUP_START	0
 #define FIRST_PAGE_GROUP_END	0x100000
@@ -125,6 +132,15 @@
 #define SECOND_PAGE_GROUP_SIZE SECOND_PAGE_GROUP_END - SECOND_PAGE_GROUP_START
 #define THIRD_PAGE_GROUP_SIZE  THIRD_PAGE_GROUP_END - THIRD_PAGE_GROUP_START
 
+#define P2_MAX_MTU                     (8000)
+#define P3_MAX_MTU                     (9600)
+#define NX_ETHERMTU                    1500
+#define NX_MAX_ETHERHDR                32 /* This contains some padding */
+
+#define NX_RX_NORMAL_BUF_MAX_LEN       (NX_MAX_ETHERHDR + NX_ETHERMTU)
+#define NX_P2_RX_JUMBO_BUF_MAX_LEN     (NX_MAX_ETHERHDR + P2_MAX_MTU)
+#define NX_P3_RX_JUMBO_BUF_MAX_LEN     (NX_MAX_ETHERHDR + P3_MAX_MTU)
+
 #define MAX_RX_BUFFER_LENGTH		1760
 #define MAX_RX_JUMBO_BUFFER_LENGTH 	8062
 #define MAX_RX_LRO_BUFFER_LENGTH	((48*1024)-512)
@@ -139,16 +155,16 @@
 #define MAX_RING_CTX 1
 
 /* Opcodes to be used with the commands */
-enum {
-	TX_ETHER_PKT = 0x01,
-/* The following opcodes are for IP checksum	*/
-	TX_TCP_PKT,
-	TX_UDP_PKT,
-	TX_IP_PKT,
-	TX_TCP_LSO,
-	TX_IPSEC,
-	TX_IPSEC_CMD
-};
+#define TX_ETHER_PKT	0x01
+#define TX_TCP_PKT	0x02
+#define TX_UDP_PKT	0x03
+#define TX_IP_PKT	0x04
+#define TX_TCP_LSO	0x05
+#define TX_TCP_LSO6	0x06
+#define TX_IPSEC	0x07
+#define TX_IPSEC_CMD	0x0a
+#define TX_TCPV6_PKT	0x0b
+#define TX_UDPV6_PKT	0x0c
 
 /* The following opcodes are for internal consumption. */
 #define NETXEN_CONTROL_OP	0x10
@@ -190,6 +206,7 @@ enum {
 #define MAX_RCV_DESCRIPTORS		16384
 #define MAX_CMD_DESCRIPTORS_HOST	(MAX_CMD_DESCRIPTORS / 4)
 #define MAX_RCV_DESCRIPTORS_1G		(MAX_RCV_DESCRIPTORS / 4)
+#define MAX_RCV_DESCRIPTORS_10G		8192
 #define MAX_JUMBO_RCV_DESCRIPTORS	1024
 #define MAX_LRO_RCV_DESCRIPTORS		64
 #define MAX_RCVSTATUS_DESCRIPTORS	MAX_RCV_DESCRIPTORS
@@ -461,7 +478,20 @@ typedef enum {
 
 	NETXEN_BRDTYPE_P2_SB31_10G_IMEZ = 0x000d,
 	NETXEN_BRDTYPE_P2_SB31_10G_HMEZ = 0x000e,
-	NETXEN_BRDTYPE_P2_SB31_10G_CX4 = 0x000f
+	NETXEN_BRDTYPE_P2_SB31_10G_CX4 = 0x000f,
+
+	NETXEN_BRDTYPE_P3_REF_QG = 0x0021,
+	NETXEN_BRDTYPE_P3_HMEZ = 0x0022,
+	NETXEN_BRDTYPE_P3_10G_CX4_LP = 0x0023,
+	NETXEN_BRDTYPE_P3_4_GB = 0x0024,
+	NETXEN_BRDTYPE_P3_IMEZ = 0x0025,
+	NETXEN_BRDTYPE_P3_10G_SFP_PLUS = 0x0026,
+	NETXEN_BRDTYPE_P3_10000_BASE_T = 0x0027,
+	NETXEN_BRDTYPE_P3_XG_LOM = 0x0028,
+	NETXEN_BRDTYPE_P3_4_GB_MM = 0x0029,
+	NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
+	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
+
 } netxen_brdtype_t;
 
 typedef enum {
@@ -1049,7 +1079,7 @@ struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
  * NetXen Board information
  */
 
-#define NETXEN_MAX_SHORT_NAME 16
+#define NETXEN_MAX_SHORT_NAME 32
 struct netxen_brdinfo {
 	netxen_brdtype_t brdtype;	/* type of board */
 	long ports;		/* max no of physical ports */
@@ -1063,6 +1093,17 @@ static const struct netxen_brdinfo netxen_boards[] = {
 	{NETXEN_BRDTYPE_P2_SB31_10G, 1, "XGb XFP"},
 	{NETXEN_BRDTYPE_P2_SB35_4G, 4, "Quad Gb"},
 	{NETXEN_BRDTYPE_P2_SB31_2G, 2, "Dual Gb"},
+	{NETXEN_BRDTYPE_P3_REF_QG,  4, "Reference Quad Gig "},
+	{NETXEN_BRDTYPE_P3_HMEZ,    2, "Dual XGb HMEZ"},
+	{NETXEN_BRDTYPE_P3_10G_CX4_LP,   2, "Dual XGb CX4 LP"},
+	{NETXEN_BRDTYPE_P3_4_GB,    4, "Quad Gig LP"},
+	{NETXEN_BRDTYPE_P3_IMEZ,    2, "Dual XGb IMEZ"},
+	{NETXEN_BRDTYPE_P3_10G_SFP_PLUS, 2, "Dual XGb SFP+ LP"},
+	{NETXEN_BRDTYPE_P3_10000_BASE_T, 1, "XGB 10G BaseT LP"},
+	{NETXEN_BRDTYPE_P3_XG_LOM,  2, "Dual XGb LOM"},
+	{NETXEN_BRDTYPE_P3_4_GB_MM, 4, "Quad GB - March Madness"},
+	{NETXEN_BRDTYPE_P3_10G_CX4, 2, "Reference Dual CX4 Option"},
+	{NETXEN_BRDTYPE_P3_10G_XFP, 1, "Reference Single XFP Option"}
 };
 
 #define NUM_SUPPORTED_BOARDS ARRAY_SIZE(netxen_boards)
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 99071c25376..cacc5280605 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -159,9 +159,16 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	switch ((netxen_brdtype_t) boardinfo->board_type) {
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 	case NETXEN_BRDTYPE_P2_SB31_2G:
+	case NETXEN_BRDTYPE_P3_REF_QG:
+	case NETXEN_BRDTYPE_P3_4_GB:
+	case NETXEN_BRDTYPE_P3_4_GB_MM:
+	case NETXEN_BRDTYPE_P3_10000_BASE_T:
+
 		ecmd->supported |= SUPPORTED_Autoneg;
 		ecmd->advertising |= ADVERTISED_Autoneg;
 	case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
+	case NETXEN_BRDTYPE_P3_10G_CX4:
+	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
 		ecmd->supported |= SUPPORTED_TP;
 		ecmd->advertising |= ADVERTISED_TP;
 		ecmd->port = PORT_TP;
@@ -171,12 +178,17 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		break;
 	case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
 	case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
+	case NETXEN_BRDTYPE_P3_IMEZ:
+	case NETXEN_BRDTYPE_P3_XG_LOM:
+	case NETXEN_BRDTYPE_P3_HMEZ:
 		ecmd->supported |= SUPPORTED_MII;
 		ecmd->advertising |= ADVERTISED_MII;
 		ecmd->port = PORT_FIBRE;
 		ecmd->autoneg = AUTONEG_DISABLE;
 		break;
 	case NETXEN_BRDTYPE_P2_SB31_10G:
+	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_XFP:
 		ecmd->supported |= SUPPORTED_FIBRE;
 		ecmd->advertising |= ADVERTISED_FIBRE;
 		ecmd->port = PORT_FIBRE;
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 545180bf3be..2374d8dc6cf 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -126,7 +126,8 @@ enum {
 	NETXEN_HW_PEGR0_CRB_AGT_ADR,
 	NETXEN_HW_PEGR1_CRB_AGT_ADR,
 	NETXEN_HW_PEGR2_CRB_AGT_ADR,
-	NETXEN_HW_PEGR3_CRB_AGT_ADR
+	NETXEN_HW_PEGR3_CRB_AGT_ADR,
+	NETXEN_HW_PEGN4_CRB_AGT_ADR
 };
 
 /*  Hub 5 */
@@ -316,6 +317,8 @@ enum {
 	((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGN2_CRB_AGT_ADR)
 #define NETXEN_HW_CRB_HUB_AGT_ADR_PGN3	\
 	((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGN3_CRB_AGT_ADR)
+#define NETXEN_HW_CRB_HUB_AGT_ADR_PGN4	\
+	((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGN4_CRB_AGT_ADR)
 #define NETXEN_HW_CRB_HUB_AGT_ADR_PGNC	\
 	((NETXEN_HW_H4_CH_HUB_ADR << 7) | NETXEN_HW_PEGNC_CRB_AGT_ADR)
 #define NETXEN_HW_CRB_HUB_AGT_ADR_PGR0	\
@@ -435,6 +438,7 @@ enum {
 #define NETXEN_CRB_ROMUSB	\
 	NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_ROMUSB)
 #define NETXEN_CRB_I2Q		NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2Q)
+#define NETXEN_CRB_SMB		NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SMB)
 #define NETXEN_CRB_MAX		NETXEN_PCI_CRB_WINDOW(64)
 
 #define NETXEN_CRB_PCIX_HOST	NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PH)
@@ -446,6 +450,7 @@ enum {
 #define NETXEN_CRB_PEG_NET_D	NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGND)
 #define NETXEN_CRB_PEG_NET_I	NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PGNI)
 #define NETXEN_CRB_DDR_NET	NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_MN)
+#define NETXEN_CRB_QDR_NET	NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SN)
 
 #define NETXEN_CRB_PCIX_MD	NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_PS)
 #define NETXEN_CRB_PCIE		NETXEN_CRB_PCIX_MD
@@ -461,11 +466,20 @@ enum {
 #define ISR_INT_TARGET_MASK_F2     (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F2))
 #define ISR_INT_TARGET_STATUS_F3   (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F3))
 #define ISR_INT_TARGET_MASK_F3     (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F3))
+#define ISR_INT_TARGET_STATUS_F4   (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F4))
+#define ISR_INT_TARGET_MASK_F4     (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F4))
+#define ISR_INT_TARGET_STATUS_F5   (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F5))
+#define ISR_INT_TARGET_MASK_F5     (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F5))
+#define ISR_INT_TARGET_STATUS_F6   (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F6))
+#define ISR_INT_TARGET_MASK_F6     (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F6))
+#define ISR_INT_TARGET_STATUS_F7   (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F7))
+#define ISR_INT_TARGET_MASK_F7     (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F7))
 
 #define NETXEN_PCI_MAPSIZE	128
 #define NETXEN_PCI_DDR_NET	(0x00000000UL)
 #define NETXEN_PCI_QDR_NET	(0x04000000UL)
 #define NETXEN_PCI_DIRECT_CRB	(0x04400000UL)
+#define NETXEN_PCI_CAMQM	(0x04800000UL)
 #define NETXEN_PCI_CAMQM_MAX	(0x04ffffffUL)
 #define NETXEN_PCI_OCM0		(0x05000000UL)
 #define NETXEN_PCI_OCM0_MAX	(0x050fffffUL)
@@ -474,6 +488,13 @@ enum {
 #define NETXEN_PCI_CRBSPACE	(0x06000000UL)
 #define NETXEN_PCI_128MB_SIZE	(0x08000000UL)
 #define NETXEN_PCI_32MB_SIZE	(0x02000000UL)
+#define NETXEN_PCI_2MB_SIZE	(0x00200000UL)
+
+#define NETXEN_PCI_MN_2M	(0)
+#define NETXEN_PCI_MS_2M	(0x80000)
+#define NETXEN_PCI_OCM0_2M	(0x000c0000UL)
+#define NETXEN_PCI_CAMQM_2M_BASE	(0x000ff800UL)
+#define NETXEN_PCI_CAMQM_2M_END		(0x04800800UL)
 
 #define NETXEN_CRB_CAM	NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_CAM)
 
@@ -484,7 +505,14 @@ enum {
 #define NETXEN_ADDR_OCM1	(0x0000000200400000ULL)
 #define NETXEN_ADDR_OCM1_MAX	(0x00000002004fffffULL)
 #define NETXEN_ADDR_QDR_NET	(0x0000000300000000ULL)
-#define NETXEN_ADDR_QDR_NET_MAX (0x00000003003fffffULL)
+#define NETXEN_ADDR_QDR_NET_MAX_P2 (0x00000003003fffffULL)
+#define NETXEN_ADDR_QDR_NET_MAX_P3 (0x0000000303ffffffULL)
+
+/*
+ *   Register offsets for MN
+ */
+#define	NETXEN_MIU_CONTROL	(0x000)
+#define	NETXEN_MIU_MN_CONTROL	(NETXEN_CRB_DDR_NET+NETXEN_MIU_CONTROL)
 
 	/* 200ms delay in each loop */
 #define	NETXEN_NIU_PHY_WAITLEN		200000
@@ -633,6 +661,59 @@ enum {
 #define NETXEN_NIU_XG1_CONTROL_CHAR_CNT		(NETXEN_CRB_NIU + 0x80054)
 #define NETXEN_NIU_XG1_PAUSE_FRAME_CNT		(NETXEN_CRB_NIU + 0x80058)
 
+/* P3 802.3ap */
+#define NETXEN_NIU_AP_MAC_CONFIG_0(I)      (NETXEN_CRB_NIU+0xa0000+(I)*0x10000)
+#define NETXEN_NIU_AP_MAC_CONFIG_1(I)      (NETXEN_CRB_NIU+0xa0004+(I)*0x10000)
+#define NETXEN_NIU_AP_MAC_IPG_IFG(I)       (NETXEN_CRB_NIU+0xa0008+(I)*0x10000)
+#define NETXEN_NIU_AP_HALF_DUPLEX_CTRL(I)  (NETXEN_CRB_NIU+0xa000c+(I)*0x10000)
+#define NETXEN_NIU_AP_MAX_FRAME_SIZE(I)    (NETXEN_CRB_NIU+0xa0010+(I)*0x10000)
+#define NETXEN_NIU_AP_TEST_REG(I)          (NETXEN_CRB_NIU+0xa001c+(I)*0x10000)
+#define NETXEN_NIU_AP_MII_MGMT_CONFIG(I)   (NETXEN_CRB_NIU+0xa0020+(I)*0x10000)
+#define NETXEN_NIU_AP_MII_MGMT_COMMAND(I)  (NETXEN_CRB_NIU+0xa0024+(I)*0x10000)
+#define NETXEN_NIU_AP_MII_MGMT_ADDR(I)     (NETXEN_CRB_NIU+0xa0028+(I)*0x10000)
+#define NETXEN_NIU_AP_MII_MGMT_CTRL(I)     (NETXEN_CRB_NIU+0xa002c+(I)*0x10000)
+#define NETXEN_NIU_AP_MII_MGMT_STATUS(I)   (NETXEN_CRB_NIU+0xa0030+(I)*0x10000)
+#define NETXEN_NIU_AP_MII_MGMT_INDICATE(I) (NETXEN_CRB_NIU+0xa0034+(I)*0x10000)
+#define NETXEN_NIU_AP_INTERFACE_CTRL(I)    (NETXEN_CRB_NIU+0xa0038+(I)*0x10000)
+#define NETXEN_NIU_AP_INTERFACE_STATUS(I)  (NETXEN_CRB_NIU+0xa003c+(I)*0x10000)
+#define NETXEN_NIU_AP_STATION_ADDR_0(I)    (NETXEN_CRB_NIU+0xa0040+(I)*0x10000)
+#define NETXEN_NIU_AP_STATION_ADDR_1(I)    (NETXEN_CRB_NIU+0xa0044+(I)*0x10000)
+
+/*
+ *   Register offsets for MN
+ */
+#define	MIU_CONTROL	       (0x000)
+#define MIU_TEST_AGT_CTRL      (0x090)
+#define MIU_TEST_AGT_ADDR_LO   (0x094)
+#define MIU_TEST_AGT_ADDR_HI   (0x098)
+#define MIU_TEST_AGT_WRDATA_LO (0x0a0)
+#define MIU_TEST_AGT_WRDATA_HI (0x0a4)
+#define MIU_TEST_AGT_WRDATA(i) (0x0a0+(4*(i)))
+#define MIU_TEST_AGT_RDDATA_LO (0x0a8)
+#define MIU_TEST_AGT_RDDATA_HI (0x0ac)
+#define MIU_TEST_AGT_RDDATA(i) (0x0a8+(4*(i)))
+#define MIU_TEST_AGT_ADDR_MASK 0xfffffff8
+#define MIU_TEST_AGT_UPPER_ADDR(off) (0)
+
+/* MIU_TEST_AGT_CTRL flags. work for SIU as well */
+#define MIU_TA_CTL_START        1
+#define MIU_TA_CTL_ENABLE       2
+#define MIU_TA_CTL_WRITE        4
+#define MIU_TA_CTL_BUSY         8
+
+#define SIU_TEST_AGT_CTRL      (0x060)
+#define SIU_TEST_AGT_ADDR_LO   (0x064)
+#define SIU_TEST_AGT_ADDR_HI   (0x078)
+#define SIU_TEST_AGT_WRDATA_LO (0x068)
+#define SIU_TEST_AGT_WRDATA_HI (0x06c)
+#define SIU_TEST_AGT_WRDATA(i) (0x068+(4*(i)))
+#define SIU_TEST_AGT_RDDATA_LO (0x070)
+#define SIU_TEST_AGT_RDDATA_HI (0x074)
+#define SIU_TEST_AGT_RDDATA(i) (0x070+(4*(i)))
+
+#define SIU_TEST_AGT_ADDR_MASK 0x3ffff8
+#define SIU_TEST_AGT_UPPER_ADDR(off) ((off)>>22)
+
 /* XG Link status */
 #define XG_LINK_UP	0x10
 #define XG_LINK_DOWN	0x20
@@ -643,6 +724,7 @@ enum {
 #define NETXEN_FW_VERSION_MINOR (NETXEN_CAM_RAM(0x154))
 #define NETXEN_FW_VERSION_SUB	(NETXEN_CAM_RAM(0x158))
 #define NETXEN_ROM_LOCK_ID	(NETXEN_CAM_RAM(0x100))
+#define NETXEN_CRB_WIN_LOCK_ID	(NETXEN_CAM_RAM(0x124))
 
 #define NETXEN_PHY_LOCK_ID	(NETXEN_CAM_RAM(0x120))
 
@@ -657,30 +739,71 @@ enum {
 #define PCIX_INT_VECTOR		(0x10100)
 #define PCIX_INT_MASK		(0x10104)
 
-#define PCIX_MN_WINDOW_F0	(0x10200)
-#define PCIX_MN_WINDOW(_f)	(PCIX_MN_WINDOW_F0 + (0x20 * (_f)))
-#define PCIX_MS_WINDOW		(0x10204)
-#define PCIX_SN_WINDOW_F0	(0x10208)
-#define PCIX_SN_WINDOW(_f)	(PCIX_SN_WINDOW_F0 + (0x20 * (_f)))
 #define PCIX_CRB_WINDOW		(0x10210)
 #define PCIX_CRB_WINDOW_F0	(0x10210)
 #define PCIX_CRB_WINDOW_F1	(0x10230)
 #define PCIX_CRB_WINDOW_F2	(0x10250)
 #define PCIX_CRB_WINDOW_F3	(0x10270)
+#define PCIX_CRB_WINDOW_F4	(0x102ac)
+#define PCIX_CRB_WINDOW_F5	(0x102bc)
+#define PCIX_CRB_WINDOW_F6	(0x102cc)
+#define PCIX_CRB_WINDOW_F7	(0x102dc)
+#define PCIE_CRB_WINDOW_REG(func)	(((func) < 4) ? \
+		(PCIX_CRB_WINDOW_F0 + (0x20 * (func))) :\
+		(PCIX_CRB_WINDOW_F4 + (0x10 * ((func)-4))))
+
+#define PCIX_MN_WINDOW		(0x10200)
+#define PCIX_MN_WINDOW_F0	(0x10200)
+#define PCIX_MN_WINDOW_F1	(0x10220)
+#define PCIX_MN_WINDOW_F2	(0x10240)
+#define PCIX_MN_WINDOW_F3	(0x10260)
+#define PCIX_MN_WINDOW_F4	(0x102a0)
+#define PCIX_MN_WINDOW_F5	(0x102b0)
+#define PCIX_MN_WINDOW_F6	(0x102c0)
+#define PCIX_MN_WINDOW_F7	(0x102d0)
+#define PCIE_MN_WINDOW_REG(func)	(((func) < 4) ? \
+		(PCIX_MN_WINDOW_F0 + (0x20 * (func))) :\
+		(PCIX_MN_WINDOW_F4 + (0x10 * ((func)-4))))
+
+#define PCIX_SN_WINDOW		(0x10208)
+#define PCIX_SN_WINDOW_F0	(0x10208)
+#define PCIX_SN_WINDOW_F1	(0x10228)
+#define PCIX_SN_WINDOW_F2	(0x10248)
+#define PCIX_SN_WINDOW_F3	(0x10268)
+#define PCIX_SN_WINDOW_F4	(0x102a8)
+#define PCIX_SN_WINDOW_F5	(0x102b8)
+#define PCIX_SN_WINDOW_F6	(0x102c8)
+#define PCIX_SN_WINDOW_F7	(0x102d8)
+#define PCIE_SN_WINDOW_REG(func)	(((func) < 4) ? \
+		(PCIX_SN_WINDOW_F0 + (0x20 * (func))) :\
+		(PCIX_SN_WINDOW_F4 + (0x10 * ((func)-4))))
 
 #define PCIX_TARGET_STATUS	(0x10118)
+#define PCIX_TARGET_STATUS_F1	(0x10160)
+#define PCIX_TARGET_STATUS_F2	(0x10164)
+#define PCIX_TARGET_STATUS_F3	(0x10168)
+#define PCIX_TARGET_STATUS_F4	(0x10360)
+#define PCIX_TARGET_STATUS_F5	(0x10364)
+#define PCIX_TARGET_STATUS_F6	(0x10368)
+#define PCIX_TARGET_STATUS_F7	(0x1036c)
+
 #define PCIX_TARGET_MASK	(0x10128)
-#define PCIX_TARGET_STATUS_F1 (0x10160)
-#define PCIX_TARGET_MASK_F1   (0x10170)
-#define PCIX_TARGET_STATUS_F2 (0x10164)
-#define PCIX_TARGET_MASK_F2   (0x10174)
-#define PCIX_TARGET_STATUS_F3 (0x10168)
-#define PCIX_TARGET_MASK_F3   (0x10178)
+#define PCIX_TARGET_MASK_F1	(0x10170)
+#define PCIX_TARGET_MASK_F2	(0x10174)
+#define PCIX_TARGET_MASK_F3	(0x10178)
+#define PCIX_TARGET_MASK_F4	(0x10370)
+#define PCIX_TARGET_MASK_F5	(0x10374)
+#define PCIX_TARGET_MASK_F6	(0x10378)
+#define PCIX_TARGET_MASK_F7	(0x1037c)
 
 #define PCIX_MSI_F0		(0x13000)
 #define PCIX_MSI_F1		(0x13004)
 #define PCIX_MSI_F2		(0x13008)
 #define PCIX_MSI_F3		(0x1300c)
+#define PCIX_MSI_F4		(0x13010)
+#define PCIX_MSI_F5		(0x13014)
+#define PCIX_MSI_F6		(0x13018)
+#define PCIX_MSI_F7		(0x1301c)
 #define PCIX_MSI_F(i)		(0x13000+((i)*4))
 
 #define PCIX_PS_MEM_SPACE	(0x90000)
@@ -698,11 +821,102 @@ enum {
 #define PCIE_SEM2_UNLOCK	(0x1c014)	/* Flash unlock */
 #define PCIE_SEM3_LOCK	  	(0x1c018)	/* Phy lock     */
 #define PCIE_SEM3_UNLOCK	(0x1c01c)	/* Phy unlock   */
-
+#define PCIE_SEM5_LOCK		(0x1c028)	/* API lock     */
+#define PCIE_SEM5_UNLOCK	(0x1c02c)	/* API unlock   */
+#define PCIE_SEM6_LOCK		(0x1c030)	/* sw lock      */
+#define PCIE_SEM6_UNLOCK	(0x1c034)	/* sw unlock    */
+#define PCIE_SEM7_LOCK		(0x1c038)	/* crb win lock */
+#define PCIE_SEM7_UNLOCK	(0x1c03c)	/* crbwin unlock*/
+
+#define PCIE_SETUP_FUNCTION	(0x12040)
+#define PCIE_SETUP_FUNCTION2	(0x12048)
 #define PCIE_TGT_SPLIT_CHICKEN	(0x12080)
+#define PCIE_CHICKEN3		(0x120c8)
 
 #define PCIE_MAX_MASTER_SPLIT	(0x14048)
 
+#define NETXEN_PORT_MODE_NONE		0
+#define NETXEN_PORT_MODE_XG		1
+#define NETXEN_PORT_MODE_GB		2
+#define NETXEN_PORT_MODE_802_3_AP	3
+#define NETXEN_PORT_MODE_AUTO_NEG	4
+#define NETXEN_PORT_MODE_AUTO_NEG_1G	5
+#define NETXEN_PORT_MODE_AUTO_NEG_XG	6
+#define NETXEN_PORT_MODE_ADDR		(NETXEN_CAM_RAM(0x24))
+#define NETXEN_WOL_PORT_MODE		(NETXEN_CAM_RAM(0x198))
+
 #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL		(0x14)
 
+#define	ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
+
+/*
+ * PCI Interrupt Vector Values.
+ */
+#define	PCIX_INT_VECTOR_BIT_F0	0x0080
+#define	PCIX_INT_VECTOR_BIT_F1	0x0100
+#define	PCIX_INT_VECTOR_BIT_F2	0x0200
+#define	PCIX_INT_VECTOR_BIT_F3	0x0400
+#define	PCIX_INT_VECTOR_BIT_F4	0x0800
+#define	PCIX_INT_VECTOR_BIT_F5	0x1000
+#define	PCIX_INT_VECTOR_BIT_F6	0x2000
+#define	PCIX_INT_VECTOR_BIT_F7	0x4000
+
+struct netxen_legacy_intr_set {
+	uint32_t	int_vec_bit;
+	uint32_t	tgt_status_reg;
+	uint32_t	tgt_mask_reg;
+	uint32_t	pci_int_reg;
+};
+
+#define	NX_LEGACY_INTR_CONFIG						\
+{									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F0,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS,		\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(0) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F1,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F1,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F1,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(1) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F2,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F2,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F2,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(2) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F3,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F3,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F3,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(3) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F4,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F4,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F4,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(4) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F5,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F5,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F5,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(5) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F6,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F6,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F6,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(6) },	\
+									\
+	{								\
+		.int_vec_bit	=	PCIX_INT_VECTOR_BIT_F7,		\
+		.tgt_status_reg	=	ISR_INT_TARGET_STATUS_F7,	\
+		.tgt_mask_reg	=	ISR_INT_TARGET_MASK_F7,		\
+		.pci_int_reg	=	ISR_MSI_INT_TRIGGER(7) },	\
+}
+
 #endif				/* __NETXEN_NIC_HDR_H_ */
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 93466ec6407..a472873f48b 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -609,33 +609,10 @@ void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw)
 	void __iomem *offset;
 	u32 tmp;
 	int count = 0;
+	uint8_t func = adapter->ahw.pci_func;
 
 	if (adapter->curr_window == wndw)
 		return;
-	switch(adapter->ahw.pci_func) {
-		case 0:
-			offset = PCI_OFFSET_SECOND_RANGE(adapter,
-					NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW));
-			break;
-		case 1:
-			offset = PCI_OFFSET_SECOND_RANGE(adapter,
-					NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW_F1));
-			break;
-		case 2:
-			offset = PCI_OFFSET_SECOND_RANGE(adapter,
-					NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW_F2));
-			break;
-		case 3:
-			offset = PCI_OFFSET_SECOND_RANGE(adapter,
-					NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW_F3));
-			break;
-		default:
-			printk(KERN_INFO "Changing the window for PCI function "
-					"%d\n",	adapter->ahw.pci_func);
-			offset = PCI_OFFSET_SECOND_RANGE(adapter,
-					NETXEN_PCIX_PH_REG(PCIX_CRB_WINDOW));
-			break;
-	}
 	/*
 	 * Move the CRB window.
 	 * We need to write to the "direct access" region of PCI
@@ -644,6 +621,8 @@ void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw)
 	 * register address is received by PCI. The direct region bypasses
 	 * the CRB bus.
 	 */
+	offset = PCI_OFFSET_SECOND_RANGE(adapter,
+			NETXEN_PCIX_PH_REG(PCIE_CRB_WINDOW_REG(func)));
 
 	if (wndw & 0x1)
 		wndw = NETXEN_WINDOW_ONE;
@@ -857,9 +836,11 @@ static int netxen_pci_set_window_warning_count;
 static  unsigned long netxen_nic_pci_set_window(struct netxen_adapter *adapter,
 						unsigned long long addr)
 {
+	void __iomem *offset;
 	static int ddr_mn_window = -1;
 	static int qdr_sn_window = -1;
 	int window;
+	uint8_t func = adapter->ahw.pci_func;
 
 	if (ADDR_IN_RANGE(addr, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
 		/* DDR network side */
@@ -867,13 +848,11 @@ static  unsigned long netxen_nic_pci_set_window(struct netxen_adapter *adapter,
 		window = (addr >> 25) & 0x3ff;
 		if (ddr_mn_window != window) {
 			ddr_mn_window = window;
-			writel(window, PCI_OFFSET_SECOND_RANGE(adapter,
-							       NETXEN_PCIX_PH_REG
-							       (PCIX_MN_WINDOW(adapter->ahw.pci_func))));
+			offset = PCI_OFFSET_SECOND_RANGE(adapter,
+				NETXEN_PCIX_PH_REG(PCIE_MN_WINDOW_REG(func)));
+			writel(window, offset);
 			/* MUST make sure window is set before we forge on... */
-			readl(PCI_OFFSET_SECOND_RANGE(adapter,
-						      NETXEN_PCIX_PH_REG
-						      (PCIX_MN_WINDOW(adapter->ahw.pci_func))));
+			readl(offset);
 		}
 		addr -= (window * NETXEN_WINDOW_ONE);
 		addr += NETXEN_PCI_DDR_NET;
@@ -885,20 +864,17 @@ static  unsigned long netxen_nic_pci_set_window(struct netxen_adapter *adapter,
 		addr += NETXEN_PCI_OCM1;
 	} else
 	    if (ADDR_IN_RANGE
-		(addr, NETXEN_ADDR_QDR_NET, NETXEN_ADDR_QDR_NET_MAX)) {
+		(addr, NETXEN_ADDR_QDR_NET, NETXEN_ADDR_QDR_NET_MAX_P2)) {
 		/* QDR network side */
 		addr -= NETXEN_ADDR_QDR_NET;
 		window = (addr >> 22) & 0x3f;
 		if (qdr_sn_window != window) {
 			qdr_sn_window = window;
-			writel((window << 22),
-			       PCI_OFFSET_SECOND_RANGE(adapter,
-						       NETXEN_PCIX_PH_REG
-						       (PCIX_SN_WINDOW(adapter->ahw.pci_func))));
+			offset = PCI_OFFSET_SECOND_RANGE(adapter,
+				NETXEN_PCIX_PH_REG(PCIE_SN_WINDOW_REG(func)));
+			writel((window << 22), offset);
 			/* MUST make sure window is set before we forge on... */
-			readl(PCI_OFFSET_SECOND_RANGE(adapter,
-						      NETXEN_PCIX_PH_REG
-						      (PCIX_SN_WINDOW(adapter->ahw.pci_func))));
+			readl(offset);
 		}
 		addr -= (window * 0x400000);
 		addr += NETXEN_PCI_QDR_NET;
@@ -972,12 +948,25 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
 	case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
 	case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
+	case NETXEN_BRDTYPE_P3_HMEZ:
+	case NETXEN_BRDTYPE_P3_XG_LOM:
+	case NETXEN_BRDTYPE_P3_10G_CX4:
+	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
+	case NETXEN_BRDTYPE_P3_IMEZ:
+	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_XFP:
+	case NETXEN_BRDTYPE_P3_10000_BASE_T:
+
 		adapter->ahw.board_type = NETXEN_NIC_XGBE;
 		break;
 	case NETXEN_BRDTYPE_P1_BD:
 	case NETXEN_BRDTYPE_P1_SB:
 	case NETXEN_BRDTYPE_P1_SMAX:
 	case NETXEN_BRDTYPE_P1_SOCK:
+	case NETXEN_BRDTYPE_P3_REF_QG:
+	case NETXEN_BRDTYPE_P3_4_GB:
+	case NETXEN_BRDTYPE_P3_4_GB_MM:
+
 		adapter->ahw.board_type = NETXEN_NIC_GBE;
 		break;
 	default:
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index e35f1a4b4eb..dfde5908209 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -115,6 +115,8 @@ static void crb_addr_transform_setup(void)
 	crb_addr_transform(C2C1);
 	crb_addr_transform(C2C0);
 	crb_addr_transform(SMB);
+	crb_addr_transform(OCM0);
+	crb_addr_transform(I2C0);
 }
 
 int netxen_init_firmware(struct netxen_adapter *adapter)
@@ -743,7 +745,6 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 				    NETXEN_ROMBUS_RESET);
 
 	if (verbose) {
-		int val;
 		if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
 			printk("P2 ROM board type: 0x%08x\n", val);
 		else
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 0ec6e7ebf90..192a22f8957 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -83,6 +83,7 @@ static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
 	ENTRY(0x0005),
 	ENTRY(0x0024),
 	ENTRY(0x0025),
+	ENTRY(0x0100),
 	{0,}
 };
 
@@ -526,7 +527,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum];
 	netxen_nic_update_cmd_producer(adapter, 0);
 	netxen_nic_update_cmd_consumer(adapter, 0);
-	writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_CMD_ADDR_LO));
 
 	if (netxen_is_flash_supported(adapter) == 0 &&
 	    netxen_get_flash_mac_addr(adapter, mac_addr) == 0)
@@ -1099,7 +1099,7 @@ netxen_handle_int(struct netxen_adapter *adapter)
 	napi_schedule(&adapter->napi);
 }
 
-irqreturn_t netxen_intr(int irq, void *data)
+static irqreturn_t netxen_intr(int irq, void *data)
 {
 	struct netxen_adapter *adapter = data;
 	u32 our_int = 0;
@@ -1120,7 +1120,7 @@ irqreturn_t netxen_intr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-irqreturn_t netxen_msi_intr(int irq, void *data)
+static irqreturn_t netxen_msi_intr(int irq, void *data)
 {
 	struct netxen_adapter *adapter = data;
 
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index db2202aeb0d..09d07051236 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -42,8 +42,11 @@
 #define CRB_CMD_CONSUMER_OFFSET     NETXEN_NIC_REG(0x0c)
 #define CRB_PAUSE_ADDR_LO           NETXEN_NIC_REG(0x10)	/* C0 EPG BUG  */
 #define CRB_PAUSE_ADDR_HI           NETXEN_NIC_REG(0x14)
-#define CRB_HOST_CMD_ADDR_HI        NETXEN_NIC_REG(0x18)	/* host add:cmd ring */
-#define CRB_HOST_CMD_ADDR_LO        NETXEN_NIC_REG(0x1c)
+#define NX_CDRP_CRB_OFFSET          NETXEN_NIC_REG(0x18)
+#define NX_ARG1_CRB_OFFSET          NETXEN_NIC_REG(0x1c)
+#define NX_ARG2_CRB_OFFSET          NETXEN_NIC_REG(0x20)
+#define NX_ARG3_CRB_OFFSET          NETXEN_NIC_REG(0x24)
+#define NX_SIGN_CRB_OFFSET          NETXEN_NIC_REG(0x28)
 #define CRB_CMD_INTR_LOOP           NETXEN_NIC_REG(0x20)	/* 4 regs for perf */
 #define CRB_CMD_DMA_LOOP            NETXEN_NIC_REG(0x24)
 #define CRB_RCV_INTR_LOOP           NETXEN_NIC_REG(0x28)
@@ -97,6 +100,7 @@
 #define CRB_HOST_BUFFER_CONS        NETXEN_NIC_REG(0xf0)
 #define CRB_JUMBO_BUFFER_PROD       NETXEN_NIC_REG(0xf4)
 #define CRB_JUMBO_BUFFER_CONS       NETXEN_NIC_REG(0xf8)
+#define CRB_HOST_DUMMY_BUF          NETXEN_NIC_REG(0xfc)
 
 #define CRB_RCVPEG_STATE            NETXEN_NIC_REG(0x13c)
 #define CRB_CMD_PRODUCER_OFFSET_1   NETXEN_NIC_REG(0x1ac)
-- 
cgit v1.2.3


From 3ce06a320f8d5a3f16960e63021cc372283efffb Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:03 -0700
Subject: netxen: add 2MB PCI memory support

New revision of netxen chip has 2MB PCI memory. Older chips
had 128MB addressable PCI memory. To retain compatibility,
this patch adds function pointers based on pci bar0 size.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h         |   70 +-
 drivers/net/netxen/netxen_nic_ethtool.c |   31 +-
 drivers/net/netxen/netxen_nic_hw.c      | 1359 ++++++++++++++++++++++++++++---
 drivers/net/netxen/netxen_nic_hw.h      |   21 +-
 drivers/net/netxen/netxen_nic_init.c    |   54 +-
 drivers/net/netxen/netxen_nic_isr.c     |    4 +-
 drivers/net/netxen/netxen_nic_main.c    |  138 ++--
 drivers/net/netxen/netxen_nic_niu.c     |   87 +-
 8 files changed, 1492 insertions(+), 272 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index acc7d79457d..29ab2ce30d6 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -799,6 +799,12 @@ struct netxen_hardware_context {
 	unsigned long first_page_group_start;
 	void __iomem *db_base;
 	unsigned long db_len;
+	unsigned long pci_len0;
+
+	int qdr_sn_window;
+	int ddr_mn_window;
+	unsigned long mn_win_crb;
+	unsigned long ms_win_crb;
 
 	u8 revision_id;
 	u16 board_type;
@@ -894,6 +900,8 @@ struct netxen_adapter {
 	struct work_struct  tx_timeout_task;
 
 	u32 curr_window;
+	u32 crb_win;
+	rwlock_t adapter_lock;
 
 	u32 cmd_producer;
 	__le32 *cmd_consumer;
@@ -947,6 +955,17 @@ struct netxen_adapter {
 	int (*init_port) (struct netxen_adapter *, int);
 	void (*init_niu) (struct netxen_adapter *);
 	int (*stop_port) (struct netxen_adapter *);
+
+	int (*hw_read_wx)(struct netxen_adapter *, ulong, void *, int);
+	int (*hw_write_wx)(struct netxen_adapter *, ulong, void *, int);
+	int (*pci_mem_read)(struct netxen_adapter *, u64, void *, int);
+	int (*pci_mem_write)(struct netxen_adapter *, u64, void *, int);
+	int (*pci_write_immediate)(struct netxen_adapter *, u64, u32);
+	u32 (*pci_read_immediate)(struct netxen_adapter *, u64);
+	void (*pci_write_normalize)(struct netxen_adapter *, u64, u32);
+	u32 (*pci_read_normalize)(struct netxen_adapter *, u64);
+	unsigned long (*pci_set_window)(struct netxen_adapter *,
+			unsigned long long);
 };				/* netxen_adapter structure */
 
 /*
@@ -1022,19 +1041,52 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter,
 int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu);
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu);
 void netxen_nic_init_niu_gb(struct netxen_adapter *adapter);
-void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw);
 void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val);
 int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off);
 void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value);
-void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 * value);
+void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 *value);
+void netxen_nic_write_w1(struct netxen_adapter *adapter, u32 index, u32 value);
+void netxen_nic_read_w1(struct netxen_adapter *adapter, u32 index, u32 *value);
 
 int netxen_nic_get_board_info(struct netxen_adapter *adapter);
-int netxen_nic_hw_read_wx(struct netxen_adapter *adapter, u64 off, void *data,
-			  int len);
-int netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off, void *data,
-			   int len);
+
+int netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter,
+		ulong off, void *data, int len);
+int netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
+		ulong off, void *data, int len);
+int netxen_nic_pci_mem_read_128M(struct netxen_adapter *adapter,
+		u64 off, void *data, int size);
+int netxen_nic_pci_mem_write_128M(struct netxen_adapter *adapter,
+		u64 off, void *data, int size);
+int netxen_nic_pci_write_immediate_128M(struct netxen_adapter *adapter,
+		u64 off, u32 data);
+u32 netxen_nic_pci_read_immediate_128M(struct netxen_adapter *adapter, u64 off);
+void netxen_nic_pci_write_normalize_128M(struct netxen_adapter *adapter,
+		u64 off, u32 data);
+u32 netxen_nic_pci_read_normalize_128M(struct netxen_adapter *adapter, u64 off);
+unsigned long netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
+		unsigned long long addr);
+void netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter,
+		u32 wndw);
+
+int netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter,
+		ulong off, void *data, int len);
+int netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter,
+		ulong off, void *data, int len);
+int netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
+		u64 off, void *data, int size);
+int netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
+		u64 off, void *data, int size);
 void netxen_crb_writelit_adapter(struct netxen_adapter *adapter,
 				 unsigned long off, int data);
+int netxen_nic_pci_write_immediate_2M(struct netxen_adapter *adapter,
+		u64 off, u32 data);
+u32 netxen_nic_pci_read_immediate_2M(struct netxen_adapter *adapter, u64 off);
+void netxen_nic_pci_write_normalize_2M(struct netxen_adapter *adapter,
+		u64 off, u32 data);
+u32 netxen_nic_pci_read_normalize_2M(struct netxen_adapter *adapter, u64 off);
+unsigned long netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
+		unsigned long long addr);
 
 /* Functions from netxen_nic_init.c */
 void netxen_free_adapter_offload(struct netxen_adapter *adapter);
@@ -1129,7 +1181,7 @@ dma_watchdog_shutdown_request(struct netxen_adapter *adapter)
 	u32 ctrl;
 
 	/* check if already inactive */
-	if (netxen_nic_hw_read_wx(adapter,
+	if (adapter->hw_read_wx(adapter,
 	    NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
 		printk(KERN_ERR "failed to read dma watchdog status\n");
 
@@ -1149,7 +1201,7 @@ dma_watchdog_shutdown_poll_result(struct netxen_adapter *adapter)
 {
 	u32 ctrl;
 
-	if (netxen_nic_hw_read_wx(adapter,
+	if (adapter->hw_read_wx(adapter,
 	    NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
 		printk(KERN_ERR "failed to read dma watchdog status\n");
 
@@ -1161,7 +1213,7 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 {
 	u32 ctrl;
 
-	if (netxen_nic_hw_read_wx(adapter,
+	if (adapter->hw_read_wx(adapter,
 		NETXEN_CAM_RAM(NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL), &ctrl, 4))
 		printk(KERN_ERR "failed to read dma watchdog status\n");
 
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index cacc5280605..7e49e610607 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -93,17 +93,21 @@ static void
 netxen_nic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
+	unsigned long flags;
 	u32 fw_major = 0;
 	u32 fw_minor = 0;
 	u32 fw_build = 0;
 
 	strncpy(drvinfo->driver, netxen_nic_driver_name, 32);
 	strncpy(drvinfo->version, NETXEN_NIC_LINUX_VERSIONID, 32);
-	fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
-					      NETXEN_FW_VERSION_MAJOR));
-	fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
-					      NETXEN_FW_VERSION_MINOR));
-	fw_build = readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
+	write_lock_irqsave(&adapter->adapter_lock, flags);
+	fw_major = adapter->pci_read_normalize(adapter,
+					NETXEN_FW_VERSION_MAJOR);
+	fw_minor = adapter->pci_read_normalize(adapter,
+					NETXEN_FW_VERSION_MINOR);
+	fw_build = adapter->pci_read_normalize(adapter,
+					NETXEN_FW_VERSION_SUB);
+	write_unlock_irqrestore(&adapter->adapter_lock, flags);
 	sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build);
 
 	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
@@ -361,19 +365,18 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
 	__u32 mode, *regs_buff = p;
-	void __iomem *addr;
 	int i, window;
 
 	memset(p, 0, NETXEN_NIC_REGS_LEN);
 	regs->version = (1 << 24) | (adapter->ahw.revision_id << 16) |
 	    (adapter->pdev)->device;
 	/* which mode */
-	NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_MODE, &regs_buff[0]);
+	adapter->hw_read_wx(adapter, NETXEN_NIU_MODE, &regs_buff[0], 4);
 	mode = regs_buff[0];
 
 	/* Common registers to all the modes */
-	NETXEN_NIC_LOCKED_READ_REG(NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER,
-				   &regs_buff[2]);
+	adapter->hw_read_wx(adapter,
+			NETXEN_NIU_STRAP_VALUE_SAVE_HIGHER, &regs_buff[2], 4);
 	/* GB/XGB Mode */
 	mode = (mode / 2) - 1;
 	window = 0;
@@ -384,9 +387,9 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
 				window = adapter->physical_port *
 					NETXEN_NIC_PORT_WINDOW;
 
-			NETXEN_NIC_LOCKED_READ_REG(niu_registers[mode].
-						   reg[i - 3] + window,
-						   &regs_buff[i]);
+			adapter->hw_read_wx(adapter,
+				niu_registers[mode].reg[i - 3] + window,
+				&regs_buff[i], 4);
 		}
 
 	}
@@ -410,7 +413,7 @@ static u32 netxen_nic_test_link(struct net_device *dev)
 			return !val;
 		}
 	} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
-		val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
+		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
 		return (val == XG_LINK_UP) ? 0 : 1;
 	}
 	return -EIO;
@@ -668,7 +671,7 @@ static int netxen_nic_reg_test(struct net_device *dev)
 	data_written = (u32)0xa5a5a5a5;
 
 	netxen_nic_reg_write(adapter, CRB_SCRATCHPAD_TEST, data_written);
-	data_read = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_SCRATCHPAD_TEST));
+	data_read = adapter->pci_read_normalize(adapter, CRB_SCRATCHPAD_TEST);
 	if (data_written != data_read)
 		return 1;
 
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index a472873f48b..defbeeac5db 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -38,6 +38,248 @@
 
 #include <net/ip.h>
 
+#define MASK(n) ((1ULL<<(n))-1)
+#define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff))
+#define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff))
+#define MS_WIN(addr) (addr & 0x0ffc0000)
+
+#define GET_MEM_OFFS_2M(addr) (addr & MASK(18))
+
+#define CRB_BLK(off)	((off >> 20) & 0x3f)
+#define CRB_SUBBLK(off)	((off >> 16) & 0xf)
+#define CRB_WINDOW_2M	(0x130060)
+#define CRB_HI(off)	((crb_hub_agt[CRB_BLK(off)] << 20) | ((off) & 0xf0000))
+#define CRB_INDIRECT_2M	(0x1e0000UL)
+
+#define CRB_WIN_LOCK_TIMEOUT 100000000
+static crb_128M_2M_block_map_t crb_128M_2M_map[64] = {
+    {{{0, 0,         0,         0} } },		/* 0: PCI */
+    {{{1, 0x0100000, 0x0102000, 0x120000},	/* 1: PCIE */
+	  {1, 0x0110000, 0x0120000, 0x130000},
+	  {1, 0x0120000, 0x0122000, 0x124000},
+	  {1, 0x0130000, 0x0132000, 0x126000},
+	  {1, 0x0140000, 0x0142000, 0x128000},
+	  {1, 0x0150000, 0x0152000, 0x12a000},
+	  {1, 0x0160000, 0x0170000, 0x110000},
+	  {1, 0x0170000, 0x0172000, 0x12e000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {1, 0x01e0000, 0x01e0800, 0x122000},
+	  {0, 0x0000000, 0x0000000, 0x000000} } },
+	{{{1, 0x0200000, 0x0210000, 0x180000} } },/* 2: MN */
+    {{{0, 0,         0,         0} } },	    /* 3: */
+    {{{1, 0x0400000, 0x0401000, 0x169000} } },/* 4: P2NR1 */
+    {{{1, 0x0500000, 0x0510000, 0x140000} } },/* 5: SRE   */
+    {{{1, 0x0600000, 0x0610000, 0x1c0000} } },/* 6: NIU   */
+    {{{1, 0x0700000, 0x0704000, 0x1b8000} } },/* 7: QM    */
+    {{{1, 0x0800000, 0x0802000, 0x170000},  /* 8: SQM0  */
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {1, 0x08f0000, 0x08f2000, 0x172000} } },
+    {{{1, 0x0900000, 0x0902000, 0x174000},	/* 9: SQM1*/
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {1, 0x09f0000, 0x09f2000, 0x176000} } },
+    {{{0, 0x0a00000, 0x0a02000, 0x178000},	/* 10: SQM2*/
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {1, 0x0af0000, 0x0af2000, 0x17a000} } },
+    {{{0, 0x0b00000, 0x0b02000, 0x17c000},	/* 11: SQM3*/
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {0, 0x0000000, 0x0000000, 0x000000},
+      {1, 0x0bf0000, 0x0bf2000, 0x17e000} } },
+	{{{1, 0x0c00000, 0x0c04000, 0x1d4000} } },/* 12: I2Q */
+	{{{1, 0x0d00000, 0x0d04000, 0x1a4000} } },/* 13: TMR */
+	{{{1, 0x0e00000, 0x0e04000, 0x1a0000} } },/* 14: ROMUSB */
+	{{{1, 0x0f00000, 0x0f01000, 0x164000} } },/* 15: PEG4 */
+	{{{0, 0x1000000, 0x1004000, 0x1a8000} } },/* 16: XDMA */
+	{{{1, 0x1100000, 0x1101000, 0x160000} } },/* 17: PEG0 */
+	{{{1, 0x1200000, 0x1201000, 0x161000} } },/* 18: PEG1 */
+	{{{1, 0x1300000, 0x1301000, 0x162000} } },/* 19: PEG2 */
+	{{{1, 0x1400000, 0x1401000, 0x163000} } },/* 20: PEG3 */
+	{{{1, 0x1500000, 0x1501000, 0x165000} } },/* 21: P2ND */
+	{{{1, 0x1600000, 0x1601000, 0x166000} } },/* 22: P2NI */
+	{{{0, 0,         0,         0} } },	/* 23: */
+	{{{0, 0,         0,         0} } },	/* 24: */
+	{{{0, 0,         0,         0} } },	/* 25: */
+	{{{0, 0,         0,         0} } },	/* 26: */
+	{{{0, 0,         0,         0} } },	/* 27: */
+	{{{0, 0,         0,         0} } },	/* 28: */
+	{{{1, 0x1d00000, 0x1d10000, 0x190000} } },/* 29: MS */
+    {{{1, 0x1e00000, 0x1e01000, 0x16a000} } },/* 30: P2NR2 */
+    {{{1, 0x1f00000, 0x1f10000, 0x150000} } },/* 31: EPG */
+	{{{0} } },				/* 32: PCI */
+	{{{1, 0x2100000, 0x2102000, 0x120000},	/* 33: PCIE */
+	  {1, 0x2110000, 0x2120000, 0x130000},
+	  {1, 0x2120000, 0x2122000, 0x124000},
+	  {1, 0x2130000, 0x2132000, 0x126000},
+	  {1, 0x2140000, 0x2142000, 0x128000},
+	  {1, 0x2150000, 0x2152000, 0x12a000},
+	  {1, 0x2160000, 0x2170000, 0x110000},
+	  {1, 0x2170000, 0x2172000, 0x12e000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000},
+	  {0, 0x0000000, 0x0000000, 0x000000} } },
+	{{{1, 0x2200000, 0x2204000, 0x1b0000} } },/* 34: CAM */
+	{{{0} } },				/* 35: */
+	{{{0} } },				/* 36: */
+	{{{0} } },				/* 37: */
+	{{{0} } },				/* 38: */
+	{{{0} } },				/* 39: */
+	{{{1, 0x2800000, 0x2804000, 0x1a4000} } },/* 40: TMR */
+	{{{1, 0x2900000, 0x2901000, 0x16b000} } },/* 41: P2NR3 */
+	{{{1, 0x2a00000, 0x2a00400, 0x1ac400} } },/* 42: RPMX1 */
+	{{{1, 0x2b00000, 0x2b00400, 0x1ac800} } },/* 43: RPMX2 */
+	{{{1, 0x2c00000, 0x2c00400, 0x1acc00} } },/* 44: RPMX3 */
+	{{{1, 0x2d00000, 0x2d00400, 0x1ad000} } },/* 45: RPMX4 */
+	{{{1, 0x2e00000, 0x2e00400, 0x1ad400} } },/* 46: RPMX5 */
+	{{{1, 0x2f00000, 0x2f00400, 0x1ad800} } },/* 47: RPMX6 */
+	{{{1, 0x3000000, 0x3000400, 0x1adc00} } },/* 48: RPMX7 */
+	{{{0, 0x3100000, 0x3104000, 0x1a8000} } },/* 49: XDMA */
+	{{{1, 0x3200000, 0x3204000, 0x1d4000} } },/* 50: I2Q */
+	{{{1, 0x3300000, 0x3304000, 0x1a0000} } },/* 51: ROMUSB */
+	{{{0} } },				/* 52: */
+	{{{1, 0x3500000, 0x3500400, 0x1ac000} } },/* 53: RPMX0 */
+	{{{1, 0x3600000, 0x3600400, 0x1ae000} } },/* 54: RPMX8 */
+	{{{1, 0x3700000, 0x3700400, 0x1ae400} } },/* 55: RPMX9 */
+	{{{1, 0x3800000, 0x3804000, 0x1d0000} } },/* 56: OCM0 */
+	{{{1, 0x3900000, 0x3904000, 0x1b4000} } },/* 57: CRYPTO */
+	{{{1, 0x3a00000, 0x3a04000, 0x1d8000} } },/* 58: SMB */
+	{{{0} } },				/* 59: I2C0 */
+	{{{0} } },				/* 60: I2C1 */
+	{{{1, 0x3d00000, 0x3d04000, 0x1d8000} } },/* 61: LPC */
+	{{{1, 0x3e00000, 0x3e01000, 0x167000} } },/* 62: P2NC */
+	{{{1, 0x3f00000, 0x3f01000, 0x168000} } }	/* 63: P2NR0 */
+};
+
+/*
+ * top 12 bits of crb internal address (hub, agent)
+ */
+static unsigned crb_hub_agt[64] =
+{
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PS,
+	NETXEN_HW_CRB_HUB_AGT_ADR_MN,
+	NETXEN_HW_CRB_HUB_AGT_ADR_MS,
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_SRE,
+	NETXEN_HW_CRB_HUB_AGT_ADR_NIU,
+	NETXEN_HW_CRB_HUB_AGT_ADR_QMN,
+	NETXEN_HW_CRB_HUB_AGT_ADR_SQN0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_SQN1,
+	NETXEN_HW_CRB_HUB_AGT_ADR_SQN2,
+	NETXEN_HW_CRB_HUB_AGT_ADR_SQN3,
+	NETXEN_HW_CRB_HUB_AGT_ADR_I2Q,
+	NETXEN_HW_CRB_HUB_AGT_ADR_TIMR,
+	NETXEN_HW_CRB_HUB_AGT_ADR_ROMUSB,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGN4,
+	NETXEN_HW_CRB_HUB_AGT_ADR_XDMA,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGN0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGN1,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGN2,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGN3,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGND,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGNI,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGS0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGS1,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGS2,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGS3,
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGSI,
+	NETXEN_HW_CRB_HUB_AGT_ADR_SN,
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_EG,
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PS,
+	NETXEN_HW_CRB_HUB_AGT_ADR_CAM,
+	0,
+	0,
+	0,
+	0,
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_TIMR,
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX1,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX2,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX3,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX4,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX5,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX6,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX7,
+	NETXEN_HW_CRB_HUB_AGT_ADR_XDMA,
+	NETXEN_HW_CRB_HUB_AGT_ADR_I2Q,
+	NETXEN_HW_CRB_HUB_AGT_ADR_ROMUSB,
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX8,
+	NETXEN_HW_CRB_HUB_AGT_ADR_RPMX9,
+	NETXEN_HW_CRB_HUB_AGT_ADR_OCM0,
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_SMB,
+	NETXEN_HW_CRB_HUB_AGT_ADR_I2C0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_I2C1,
+	0,
+	NETXEN_HW_CRB_HUB_AGT_ADR_PGNC,
+	0,
+};
+
 struct netxen_recv_crb recv_crb_registers[] = {
 	/*
 	 * Instance 0.
@@ -123,7 +365,7 @@ static u64 ctx_addr_sig_regs[][3] = {
 #define NETXEN_MIN_MTU		64
 #define NETXEN_ETH_FCS_SIZE     4
 #define NETXEN_ENET_HEADER_SIZE 14
-#define NETXEN_WINDOW_ONE 	0x2000000	/*CRB Window: bit 25 of CRB address */
+#define NETXEN_WINDOW_ONE 	0x2000000 /*CRB Window: bit 25 of CRB address */
 #define NETXEN_FIRMWARE_LEN 	((16 * 1024) / 4)
 #define NETXEN_NIU_HDRSIZE	(0x1 << 6)
 #define NETXEN_NIU_TLRSIZE	(0x1 << 5)
@@ -139,8 +381,6 @@ static u64 ctx_addr_sig_regs[][3] = {
 
 #define NETXEN_NIC_WINDOW_MARGIN 0x100000
 
-static unsigned long netxen_nic_pci_set_window(struct netxen_adapter *adapter,
-					       unsigned long long addr);
 void netxen_free_hw_resources(struct netxen_adapter *adapter);
 
 int netxen_nic_set_mac(struct net_device *netdev, void *p)
@@ -181,9 +421,9 @@ netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter)
 	if (adapter->mc_enabled)
 		return 0;
 
-	netxen_nic_hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	adapter->hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
 	val |= (1UL << (28+port));
-	netxen_nic_hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	adapter->hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
 
 	/* add broadcast addr to filter */
 	val = 0xffffff;
@@ -212,9 +452,9 @@ netxen_nic_disable_mcast_filter(struct netxen_adapter *adapter)
 	if (!adapter->mc_enabled)
 		return 0;
 
-	netxen_nic_hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	adapter->hw_read_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
 	val &= ~(1UL << (28+port));
-	netxen_nic_hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
+	adapter->hw_write_wx(adapter, NETXEN_MAC_ADDR_CNTL_REG, &val, 4);
 
 	val = MAC_HI(addr);
 	netxen_crb_writelit_adapter(adapter, NETXEN_UNICAST_ADDR(port, 0), val);
@@ -344,18 +584,15 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 
 
 	for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
-		DPRINTK(INFO, "Command Peg ready..waiting for rcv peg\n");
 		loops = 0;
 		state = 0;
-		/* Window 1 call */
-		state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_RCVPEG_STATE));
-		while (state != PHAN_PEG_RCV_INITIALIZED && loops < 20) {
-			msleep(1);
+		do {
 			/* Window 1 call */
-			state = readl(NETXEN_CRB_NORMALIZE(adapter,
-					CRB_RCVPEG_STATE));
+			state = adapter->pci_read_normalize(adapter,
+					CRB_RCVPEG_STATE);
+			msleep(1);
 			loops++;
-		}
+		} while (state != PHAN_PEG_RCV_INITIALIZED && loops < 20);
 		if (loops >= 20) {
 			printk(KERN_ERR "Rcv Peg initialization not complete:"
 			       "%x.\n", state);
@@ -363,10 +600,10 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 			return err;
 		}
 	}
-	adapter->intr_scheme = readl(
-		NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW));
-	adapter->msi_mode = readl(
-		NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW));
+	adapter->intr_scheme = adapter->pci_read_normalize(adapter,
+			CRB_NIC_CAPABILITIES_FW);
+	adapter->msi_mode = adapter->pci_read_normalize(adapter,
+			CRB_NIC_MSI_MODE_FW);
 
 	addr = pci_alloc_consistent(adapter->pdev,
 			    sizeof(struct netxen_ring_ctx) + sizeof(uint32_t),
@@ -449,12 +686,12 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
 	}
 	/* Window = 1 */
 
-	writel(lower32(adapter->ctx_desc_phys_addr),
-	       NETXEN_CRB_NORMALIZE(adapter, CRB_CTX_ADDR_REG_LO(func_id)));
-	writel(upper32(adapter->ctx_desc_phys_addr),
-	       NETXEN_CRB_NORMALIZE(adapter, CRB_CTX_ADDR_REG_HI(func_id)));
-	writel(NETXEN_CTX_SIGNATURE | func_id,
-	       NETXEN_CRB_NORMALIZE(adapter, CRB_CTX_SIGNATURE_REG(func_id)));
+	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_LO(func_id),
+			lower32(adapter->ctx_desc_phys_addr));
+	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_HI(func_id),
+			upper32(adapter->ctx_desc_phys_addr));
+	adapter->pci_write_normalize(adapter, CRB_CTX_SIGNATURE_REG(func_id),
+			NETXEN_CTX_SIGNATURE | func_id);
 	return err;
 }
 
@@ -601,10 +838,41 @@ int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 mac[])
 	return 0;
 }
 
+#define CRB_WIN_LOCK_TIMEOUT 100000000
+
+static int crb_win_lock(struct netxen_adapter *adapter)
+{
+	int done = 0, timeout = 0;
+
+	while (!done) {
+		/* acquire semaphore3 from PCI HW block */
+		adapter->hw_read_wx(adapter,
+				NETXEN_PCIE_REG(PCIE_SEM7_LOCK), &done, 4);
+		if (done == 1)
+			break;
+		if (timeout >= CRB_WIN_LOCK_TIMEOUT)
+			return -1;
+		timeout++;
+		udelay(1);
+	}
+	netxen_crb_writelit_adapter(adapter,
+			NETXEN_CRB_WIN_LOCK_ID, adapter->portnum);
+	return 0;
+}
+
+static void crb_win_unlock(struct netxen_adapter *adapter)
+{
+	int val;
+
+	adapter->hw_read_wx(adapter,
+			NETXEN_PCIE_REG(PCIE_SEM7_UNLOCK), &val, 4);
+}
+
 /*
  * Changes the CRB window to the specified window.
  */
-void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw)
+void
+netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter, u32 wndw)
 {
 	void __iomem *offset;
 	u32 tmp;
@@ -633,7 +901,7 @@ void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw)
 	while ((tmp = readl(offset)) != wndw) {
 		printk(KERN_WARNING "%s: %s WARNING: CRB window value not "
 		       "registered properly: 0x%08x.\n",
-		       netxen_nic_driver_name, __FUNCTION__, tmp);
+		       netxen_nic_driver_name, __func__, tmp);
 		mdelay(1);
 		if (count >= 10)
 			break;
@@ -646,51 +914,112 @@ void netxen_nic_pci_change_crbwindow(struct netxen_adapter *adapter, u32 wndw)
 		adapter->curr_window = 0;
 }
 
+/*
+ * Return -1 if off is not valid,
+ *	 1 if window access is needed. 'off' is set to offset from
+ *	   CRB space in 128M pci map
+ *	 0 if no window access is needed. 'off' is set to 2M addr
+ * In: 'off' is offset from base in 128M pci map
+ */
+static int
+netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter,
+		ulong *off, int len)
+{
+	unsigned long end = *off + len;
+	crb_128M_2M_sub_block_map_t *m;
+
+
+	if (*off >= NETXEN_CRB_MAX)
+		return -1;
+
+	if (*off >= NETXEN_PCI_CAMQM && (end <= NETXEN_PCI_CAMQM_2M_END)) {
+		*off = (*off - NETXEN_PCI_CAMQM) + NETXEN_PCI_CAMQM_2M_BASE +
+			(ulong)adapter->ahw.pci_base0;
+		return 0;
+	}
+
+	if (*off < NETXEN_PCI_CRBSPACE)
+		return -1;
+
+	*off -= NETXEN_PCI_CRBSPACE;
+	end = *off + len;
+
+	/*
+	 * Try direct map
+	 */
+	m = &crb_128M_2M_map[CRB_BLK(*off)].sub_block[CRB_SUBBLK(*off)];
+
+	if (m->valid && (m->start_128M <= *off) && (m->end_128M >= end)) {
+		*off = *off + m->start_2M - m->start_128M +
+			(ulong)adapter->ahw.pci_base0;
+		return 0;
+	}
+
+	/*
+	 * Not in direct map, use crb window
+	 */
+	return 1;
+}
+
+/*
+ * In: 'off' is offset from CRB space in 128M pci map
+ * Out: 'off' is 2M pci map addr
+ * side effect: lock crb window
+ */
+static void
+netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong *off)
+{
+	u32 win_read;
+
+	adapter->crb_win = CRB_HI(*off);
+	writel(adapter->crb_win, (void *)(CRB_WINDOW_2M +
+		adapter->ahw.pci_base0));
+	/*
+	 * Read back value to make sure write has gone through before trying
+	 * to use it.
+	 */
+	win_read = readl((void *)(CRB_WINDOW_2M + adapter->ahw.pci_base0));
+	if (win_read != adapter->crb_win) {
+		printk(KERN_ERR "%s: Written crbwin (0x%x) != "
+				"Read crbwin (0x%x), off=0x%lx\n",
+				__func__, adapter->crb_win, win_read, *off);
+	}
+	*off = (*off & MASK(16)) + CRB_INDIRECT_2M +
+		(ulong)adapter->ahw.pci_base0;
+}
+
 int netxen_load_firmware(struct netxen_adapter *adapter)
 {
 	int i;
 	u32 data, size = 0;
 	u32 flashaddr = NETXEN_FLASH_BASE, memaddr = NETXEN_PHANTOM_MEM_BASE;
-	u64 off;
-	void __iomem *addr;
 
 	size = NETXEN_FIRMWARE_LEN;
-	writel(1, NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CAS_RST));
+	adapter->pci_write_normalize(adapter,
+				NETXEN_ROMUSB_GLB_CAS_RST, 1);
 
 	for (i = 0; i < size; i++) {
-		int retries = 10;
 		if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0)
 			return -EIO;
 
-		off = netxen_nic_pci_set_window(adapter, memaddr);
-		addr = pci_base_offset(adapter, off);
-		writel(data, addr);
-		do {
-			if (readl(addr) == data)
-				break;
-			msleep(100);
-			writel(data, addr);
-		} while (--retries);
-		if (!retries) {
-			printk(KERN_ERR "%s: firmware load aborted, write failed at 0x%x\n",
-					netxen_nic_driver_name, memaddr);
-			return -EIO;
-		}
+		adapter->pci_mem_write(adapter, memaddr, &data, 4);
 		flashaddr += 4;
 		memaddr += 4;
+		cond_resched();
 	}
 	udelay(100);
 	/* make sure Casper is powered on */
-	writel(0x3fff,
-	       NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL));
-	writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_ROMUSB_GLB_CAS_RST));
+	adapter->pci_write_normalize(adapter,
+				NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);
+	adapter->pci_write_normalize(adapter,
+				NETXEN_ROMUSB_GLB_CAS_RST, 0);
 
 	return 0;
 }
 
 int
-netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off, void *data,
-		       int len)
+netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter,
+		ulong off, void *data, int len)
 {
 	void __iomem *addr;
 
@@ -698,7 +1027,7 @@ netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off, void *data,
 		addr = NETXEN_CRB_NORMALIZE(adapter, off);
 	} else {		/* Window 0 */
 		addr = pci_base_offset(adapter, off);
-		netxen_nic_pci_change_crbwindow(adapter, 0);
+		netxen_nic_pci_change_crbwindow_128M(adapter, 0);
 	}
 
 	DPRINTK(INFO, "writing to base %lx offset %llx addr %p"
@@ -706,7 +1035,7 @@ netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off, void *data,
 		pci_base(adapter, off), off, addr,
 		*(unsigned long long *)data, len);
 	if (!addr) {
-		netxen_nic_pci_change_crbwindow(adapter, 1);
+		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
 		return 1;
 	}
 
@@ -733,14 +1062,14 @@ netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off, void *data,
 		break;
 	}
 	if (!ADDR_IN_WINDOW1(off))
-		netxen_nic_pci_change_crbwindow(adapter, 1);
+		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
 
 	return 0;
 }
 
 int
-netxen_nic_hw_read_wx(struct netxen_adapter *adapter, u64 off, void *data,
-		      int len)
+netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter,
+		ulong off, void *data, int len)
 {
 	void __iomem *addr;
 
@@ -748,13 +1077,13 @@ netxen_nic_hw_read_wx(struct netxen_adapter *adapter, u64 off, void *data,
 		addr = NETXEN_CRB_NORMALIZE(adapter, off);
 	} else {		/* Window 0 */
 		addr = pci_base_offset(adapter, off);
-		netxen_nic_pci_change_crbwindow(adapter, 0);
+		netxen_nic_pci_change_crbwindow_128M(adapter, 0);
 	}
 
 	DPRINTK(INFO, "reading from base %lx offset %llx addr %p\n",
 		pci_base(adapter, off), off, addr);
 	if (!addr) {
-		netxen_nic_pci_change_crbwindow(adapter, 1);
+		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
 		return 1;
 	}
 	switch (len) {
@@ -778,76 +1107,190 @@ netxen_nic_hw_read_wx(struct netxen_adapter *adapter, u64 off, void *data,
 	DPRINTK(INFO, "read %lx\n", *(unsigned long *)data);
 
 	if (!ADDR_IN_WINDOW1(off))
-		netxen_nic_pci_change_crbwindow(adapter, 1);
+		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
 
 	return 0;
 }
 
-void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val)
-{				/* Only for window 1 */
-	void __iomem *addr;
+int
+netxen_nic_hw_write_wx_2M(struct netxen_adapter *adapter,
+		ulong off, void *data, int len)
+{
+	unsigned long flags = 0;
+	int rv;
 
-	addr = NETXEN_CRB_NORMALIZE(adapter, off);
-	DPRINTK(INFO, "writing to base %lx offset %llx addr %p data %x\n",
-		pci_base(adapter, off), off, addr, val);
-	writel(val, addr);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off, len);
 
+	if (rv == -1) {
+		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
+				__func__, off);
+		dump_stack();
+		return -1;
+	}
+
+	if (rv == 1) {
+		write_lock_irqsave(&adapter->adapter_lock, flags);
+		crb_win_lock(adapter);
+		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
+	}
+
+	DPRINTK(1, INFO, "write data %lx to offset %llx, len=%d\n",
+			*(unsigned long *)data, off, len);
+
+	switch (len) {
+	case 1:
+		writeb(*(uint8_t *)data, (void *)off);
+		break;
+	case 2:
+		writew(*(uint16_t *)data, (void *)off);
+		break;
+	case 4:
+		writel(*(uint32_t *)data, (void *)off);
+		break;
+	case 8:
+		writeq(*(uint64_t *)data, (void *)off);
+		break;
+	default:
+		DPRINTK(1, INFO,
+			"writing data %lx to offset %llx, num words=%d\n",
+			*(unsigned long *)data, off, (len>>3));
+		break;
+	}
+	if (rv == 1) {
+		crb_win_unlock(adapter);
+		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+	}
+
+	return 0;
 }
 
-int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off)
-{				/* Only for window 1 */
-	void __iomem *addr;
-	int val;
+int
+netxen_nic_hw_read_wx_2M(struct netxen_adapter *adapter,
+		ulong off, void *data, int len)
+{
+	unsigned long flags = 0;
+	int rv;
 
-	addr = NETXEN_CRB_NORMALIZE(adapter, off);
-	DPRINTK(INFO, "reading from base %lx offset %llx addr %p\n",
-		pci_base(adapter, off), off, addr);
-	val = readl(addr);
-	writel(val, addr);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off, len);
+
+	if (rv == -1) {
+		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
+				__func__, off);
+		dump_stack();
+		return -1;
+	}
+
+	if (rv == 1) {
+		write_lock_irqsave(&adapter->adapter_lock, flags);
+		crb_win_lock(adapter);
+		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
+	}
+
+	DPRINTK(1, INFO, "read from offset %lx, len=%d\n", off, len);
+
+	switch (len) {
+	case 1:
+		*(uint8_t *)data = readb((void *)off);
+		break;
+	case 2:
+		*(uint16_t *)data = readw((void *)off);
+		break;
+	case 4:
+		*(uint32_t *)data = readl((void *)off);
+		break;
+	case 8:
+		*(uint64_t *)data = readq((void *)off);
+		break;
+	default:
+		break;
+	}
+
+	DPRINTK(1, INFO, "read %lx\n", *(unsigned long *)data);
 
+	if (rv == 1) {
+		crb_win_unlock(adapter);
+		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+	}
+
+	return 0;
+}
+
+void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val)
+{
+	adapter->hw_write_wx(adapter, off, &val, 4);
+}
+
+int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off)
+{
+	int val;
+	adapter->hw_read_wx(adapter, off, &val, 4);
 	return val;
 }
 
 /* Change the window to 0, write and change back to window 1. */
 void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value)
 {
-	void __iomem *addr;
-
-	netxen_nic_pci_change_crbwindow(adapter, 0);
-	addr = pci_base_offset(adapter, index);
-	writel(value, addr);
-	netxen_nic_pci_change_crbwindow(adapter, 1);
+	adapter->hw_write_wx(adapter, index, &value, 4);
 }
 
 /* Change the window to 0, read and change back to window 1. */
-void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 * value)
+void netxen_nic_read_w0(struct netxen_adapter *adapter, u32 index, u32 *value)
 {
-	void __iomem *addr;
+	adapter->hw_read_wx(adapter, index, value, 4);
+}
 
-	addr = pci_base_offset(adapter, index);
+void netxen_nic_write_w1(struct netxen_adapter *adapter, u32 index, u32 value)
+{
+	adapter->hw_write_wx(adapter, index, &value, 4);
+}
+
+void netxen_nic_read_w1(struct netxen_adapter *adapter, u32 index, u32 *value)
+{
+	adapter->hw_read_wx(adapter, index, value, 4);
+}
+
+/*
+ * check memory access boundary.
+ * used by test agent. support ddr access only for now
+ */
+static unsigned long
+netxen_nic_pci_mem_bound_check(struct netxen_adapter *adapter,
+		unsigned long long addr, int size)
+{
+	if (!ADDR_IN_RANGE(addr,
+			NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX) ||
+		!ADDR_IN_RANGE(addr+size-1,
+			NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX) ||
+		((size != 1) && (size != 2) && (size != 4) && (size != 8))) {
+		return 0;
+	}
 
-	netxen_nic_pci_change_crbwindow(adapter, 0);
-	*value = readl(addr);
-	netxen_nic_pci_change_crbwindow(adapter, 1);
+	return 1;
 }
 
 static int netxen_pci_set_window_warning_count;
 
-static  unsigned long netxen_nic_pci_set_window(struct netxen_adapter *adapter,
-						unsigned long long addr)
+unsigned long
+netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
+		unsigned long long addr)
 {
 	void __iomem *offset;
-	static int ddr_mn_window = -1;
-	static int qdr_sn_window = -1;
 	int window;
+	unsigned long long	qdr_max;
 	uint8_t func = adapter->ahw.pci_func;
 
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+		qdr_max = NETXEN_ADDR_QDR_NET_MAX_P2;
+	} else {
+		qdr_max = NETXEN_ADDR_QDR_NET_MAX_P3;
+	}
+
 	if (ADDR_IN_RANGE(addr, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
 		/* DDR network side */
 		addr -= NETXEN_ADDR_DDR_NET;
 		window = (addr >> 25) & 0x3ff;
-		if (ddr_mn_window != window) {
-			ddr_mn_window = window;
+		if (adapter->ahw.ddr_mn_window != window) {
+			adapter->ahw.ddr_mn_window = window;
 			offset = PCI_OFFSET_SECOND_RANGE(adapter,
 				NETXEN_PCIX_PH_REG(PCIE_MN_WINDOW_REG(func)));
 			writel(window, offset);
@@ -862,14 +1305,12 @@ static  unsigned long netxen_nic_pci_set_window(struct netxen_adapter *adapter,
 	} else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
 		addr -= NETXEN_ADDR_OCM1;
 		addr += NETXEN_PCI_OCM1;
-	} else
-	    if (ADDR_IN_RANGE
-		(addr, NETXEN_ADDR_QDR_NET, NETXEN_ADDR_QDR_NET_MAX_P2)) {
+	} else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_QDR_NET, qdr_max)) {
 		/* QDR network side */
 		addr -= NETXEN_ADDR_QDR_NET;
 		window = (addr >> 22) & 0x3f;
-		if (qdr_sn_window != window) {
-			qdr_sn_window = window;
+		if (adapter->ahw.qdr_sn_window != window) {
+			adapter->ahw.qdr_sn_window = window;
 			offset = PCI_OFFSET_SECOND_RANGE(adapter,
 				NETXEN_PCIX_PH_REG(PCIE_SN_WINDOW_REG(func)));
 			writel((window << 22), offset);
@@ -888,11 +1329,711 @@ static  unsigned long netxen_nic_pci_set_window(struct netxen_adapter *adapter,
 			printk("%s: Warning:netxen_nic_pci_set_window()"
 			       " Unknown address range!\n",
 			       netxen_nic_driver_name);
+		addr = -1UL;
+	}
+	return addr;
+}
+
+/*
+ * Note : only 32-bit writes!
+ */
+int netxen_nic_pci_write_immediate_128M(struct netxen_adapter *adapter,
+		u64 off, u32 data)
+{
+	writel(data, (void __iomem *)(PCI_OFFSET_SECOND_RANGE(adapter, off)));
+	return 0;
+}
+
+u32 netxen_nic_pci_read_immediate_128M(struct netxen_adapter *adapter, u64 off)
+{
+	return readl((void __iomem *)(pci_base_offset(adapter, off)));
+}
+
+void netxen_nic_pci_write_normalize_128M(struct netxen_adapter *adapter,
+		u64 off, u32 data)
+{
+	writel(data, NETXEN_CRB_NORMALIZE(adapter, off));
+}
+
+u32 netxen_nic_pci_read_normalize_128M(struct netxen_adapter *adapter, u64 off)
+{
+	return readl(NETXEN_CRB_NORMALIZE(adapter, off));
+}
+
+unsigned long
+netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
+		unsigned long long addr)
+{
+	int window;
+	u32 win_read;
 
+	if (ADDR_IN_RANGE(addr, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
+		/* DDR network side */
+		window = MN_WIN(addr);
+		adapter->ahw.ddr_mn_window = window;
+		adapter->hw_write_wx(adapter,
+				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
+				&window, 4);
+		adapter->hw_read_wx(adapter,
+				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
+				&win_read, 4);
+		if ((win_read << 17) != window) {
+			printk(KERN_INFO "Written MNwin (0x%x) != "
+				"Read MNwin (0x%x)\n", window, win_read);
+		}
+		addr = GET_MEM_OFFS_2M(addr) + NETXEN_PCI_DDR_NET;
+	} else if (ADDR_IN_RANGE(addr,
+				NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
+		if ((addr & 0x00ff800) == 0xff800) {
+			printk("%s: QM access not handled.\n", __func__);
+			addr = -1UL;
+		}
+
+		window = OCM_WIN(addr);
+		adapter->ahw.ddr_mn_window = window;
+		adapter->hw_write_wx(adapter,
+				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
+				&window, 4);
+		adapter->hw_read_wx(adapter,
+				adapter->ahw.mn_win_crb | NETXEN_PCI_CRBSPACE,
+				&win_read, 4);
+		if ((win_read >> 7) != window) {
+			printk(KERN_INFO "%s: Written OCMwin (0x%x) != "
+					"Read OCMwin (0x%x)\n",
+					__func__, window, win_read);
+		}
+		addr = GET_MEM_OFFS_2M(addr) + NETXEN_PCI_OCM0_2M;
+
+	} else if (ADDR_IN_RANGE(addr,
+			NETXEN_ADDR_QDR_NET, NETXEN_ADDR_QDR_NET_MAX_P3)) {
+		/* QDR network side */
+		window = MS_WIN(addr);
+		adapter->ahw.qdr_sn_window = window;
+		adapter->hw_write_wx(adapter,
+				adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE,
+				&window, 4);
+		adapter->hw_read_wx(adapter,
+				adapter->ahw.ms_win_crb | NETXEN_PCI_CRBSPACE,
+				&win_read, 4);
+		if (win_read != window) {
+			printk(KERN_INFO "%s: Written MSwin (0x%x) != "
+					"Read MSwin (0x%x)\n",
+					__func__, window, win_read);
+		}
+		addr = GET_MEM_OFFS_2M(addr) + NETXEN_PCI_QDR_NET;
+
+	} else {
+		/*
+		 * peg gdb frequently accesses memory that doesn't exist,
+		 * this limits the chit chat so debugging isn't slowed down.
+		 */
+		if ((netxen_pci_set_window_warning_count++ < 8)
+			|| (netxen_pci_set_window_warning_count%64 == 0)) {
+			printk("%s: Warning:%s Unknown address range!\n",
+					__func__, netxen_nic_driver_name);
+}
+		addr = -1UL;
 	}
 	return addr;
 }
 
+static int netxen_nic_pci_is_same_window(struct netxen_adapter *adapter,
+				      unsigned long long addr)
+{
+	int window;
+	unsigned long long qdr_max;
+
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		qdr_max = NETXEN_ADDR_QDR_NET_MAX_P2;
+	else
+		qdr_max = NETXEN_ADDR_QDR_NET_MAX_P3;
+
+	if (ADDR_IN_RANGE(addr,
+			NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
+		/* DDR network side */
+		BUG();	/* MN access can not come here */
+	} else if (ADDR_IN_RANGE(addr,
+			NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
+		return 1;
+	} else if (ADDR_IN_RANGE(addr,
+				NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
+		return 1;
+	} else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_QDR_NET, qdr_max)) {
+		/* QDR network side */
+		window = ((addr - NETXEN_ADDR_QDR_NET) >> 22) & 0x3f;
+		if (adapter->ahw.qdr_sn_window == window)
+			return 1;
+	}
+
+	return 0;
+}
+
+static int netxen_nic_pci_mem_read_direct(struct netxen_adapter *adapter,
+			u64 off, void *data, int size)
+{
+	unsigned long flags;
+	void *addr;
+	int ret = 0;
+	u64 start;
+	uint8_t *mem_ptr = NULL;
+	unsigned long mem_base;
+	unsigned long mem_page;
+
+	write_lock_irqsave(&adapter->adapter_lock, flags);
+
+	/*
+	 * If attempting to access unknown address or straddle hw windows,
+	 * do not access.
+	 */
+	start = adapter->pci_set_window(adapter, off);
+	if ((start == -1UL) ||
+		(netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
+		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+		printk(KERN_ERR "%s out of bound pci memory access. "
+			"offset is 0x%llx\n", netxen_nic_driver_name, off);
+		return -1;
+	}
+
+	addr = (void *)(pci_base_offset(adapter, start));
+	if (!addr) {
+		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+		mem_base = pci_resource_start(adapter->pdev, 0);
+		mem_page = start & PAGE_MASK;
+		/* Map two pages whenever user tries to access addresses in two
+		consecutive pages.
+		*/
+		if (mem_page != ((start + size - 1) & PAGE_MASK))
+			mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2);
+		else
+			mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
+		if (mem_ptr == 0UL) {
+			*(uint8_t  *)data = 0;
+			return -1;
+		}
+		addr = mem_ptr;
+		addr += start & (PAGE_SIZE - 1);
+		write_lock_irqsave(&adapter->adapter_lock, flags);
+	}
+
+	switch (size) {
+	case 1:
+		*(uint8_t  *)data = readb(addr);
+		break;
+	case 2:
+		*(uint16_t *)data = readw(addr);
+		break;
+	case 4:
+		*(uint32_t *)data = readl(addr);
+		break;
+	case 8:
+		*(uint64_t *)data = readq(addr);
+		break;
+	default:
+		ret = -1;
+		break;
+	}
+	write_unlock_irqrestore(&adapter->adapter_lock, flags);
+	DPRINTK(1, INFO, "read %llx\n", *(unsigned long long *)data);
+
+	if (mem_ptr)
+		iounmap(mem_ptr);
+	return ret;
+}
+
+static int
+netxen_nic_pci_mem_write_direct(struct netxen_adapter *adapter, u64 off,
+		void *data, int size)
+{
+	unsigned long flags;
+	void *addr;
+	int ret = 0;
+	u64 start;
+	uint8_t *mem_ptr = NULL;
+	unsigned long mem_base;
+	unsigned long mem_page;
+
+	write_lock_irqsave(&adapter->adapter_lock, flags);
+
+	/*
+	 * If attempting to access unknown address or straddle hw windows,
+	 * do not access.
+	 */
+	start = adapter->pci_set_window(adapter, off);
+	if ((start == -1UL) ||
+		(netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) {
+		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+		printk(KERN_ERR "%s out of bound pci memory access. "
+			"offset is 0x%llx\n", netxen_nic_driver_name, off);
+		return -1;
+	}
+
+	addr = (void *)(pci_base_offset(adapter, start));
+	if (!addr) {
+		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+		mem_base = pci_resource_start(adapter->pdev, 0);
+		mem_page = start & PAGE_MASK;
+		/* Map two pages whenever user tries to access addresses in two
+		 * consecutive pages.
+		 */
+		if (mem_page != ((start + size - 1) & PAGE_MASK))
+			mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2);
+		else
+			mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
+		if (mem_ptr == 0UL)
+			return -1;
+		addr = mem_ptr;
+		addr += start & (PAGE_SIZE - 1);
+		write_lock_irqsave(&adapter->adapter_lock, flags);
+	}
+
+	switch (size) {
+	case 1:
+		writeb(*(uint8_t *)data, addr);
+		break;
+	case 2:
+		writew(*(uint16_t *)data, addr);
+		break;
+	case 4:
+		writel(*(uint32_t *)data, addr);
+		break;
+	case 8:
+		writeq(*(uint64_t *)data, addr);
+		break;
+	default:
+		ret = -1;
+		break;
+	}
+	write_unlock_irqrestore(&adapter->adapter_lock, flags);
+	DPRINTK(1, INFO, "writing data %llx to offset %llx\n",
+			*(unsigned long long *)data, start);
+	if (mem_ptr)
+		iounmap(mem_ptr);
+	return ret;
+}
+
+#define MAX_CTL_CHECK   1000
+
+int
+netxen_nic_pci_mem_write_128M(struct netxen_adapter *adapter,
+		u64 off, void *data, int size)
+{
+	unsigned long   flags, mem_crb;
+	int	     i, j, ret = 0, loop, sz[2], off0;
+	uint32_t      temp;
+	uint64_t      off8, tmpw, word[2] = {0, 0};
+
+	/*
+	 * If not MN, go check for MS or invalid.
+	 */
+	if (netxen_nic_pci_mem_bound_check(adapter, off, size) == 0)
+		return netxen_nic_pci_mem_write_direct(adapter,
+				off, data, size);
+
+	off8 = off & 0xfffffff8;
+	off0 = off & 0x7;
+	sz[0] = (size < (8 - off0)) ? size : (8 - off0);
+	sz[1] = size - sz[0];
+	loop = ((off0 + size - 1) >> 3) + 1;
+	mem_crb = (unsigned long)pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
+
+	if ((size != 8) || (off0 != 0))  {
+		for (i = 0; i < loop; i++) {
+			if (adapter->pci_mem_read(adapter,
+				off8 + (i << 3), &word[i], 8))
+				return -1;
+		}
+	}
+
+	switch (size) {
+	case 1:
+		tmpw = *((uint8_t *)data);
+		break;
+	case 2:
+		tmpw = *((uint16_t *)data);
+		break;
+	case 4:
+		tmpw = *((uint32_t *)data);
+		break;
+	case 8:
+	default:
+		tmpw = *((uint64_t *)data);
+		break;
+	}
+	word[0] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8));
+	word[0] |= tmpw << (off0 * 8);
+
+	if (loop == 2) {
+		word[1] &= ~(~0ULL << (sz[1] * 8));
+		word[1] |= tmpw >> (sz[0] * 8);
+	}
+
+	write_lock_irqsave(&adapter->adapter_lock, flags);
+	netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+
+	for (i = 0; i < loop; i++) {
+		writel((uint32_t)(off8 + (i << 3)),
+			(void *)(mem_crb+MIU_TEST_AGT_ADDR_LO));
+		writel(0,
+			(void *)(mem_crb+MIU_TEST_AGT_ADDR_HI));
+		writel(word[i] & 0xffffffff,
+			(void *)(mem_crb+MIU_TEST_AGT_WRDATA_LO));
+		writel((word[i] >> 32) & 0xffffffff,
+			(void *)(mem_crb+MIU_TEST_AGT_WRDATA_HI));
+		writel(MIU_TA_CTL_ENABLE|MIU_TA_CTL_WRITE,
+			(void *)(mem_crb+MIU_TEST_AGT_CTRL));
+		writel(MIU_TA_CTL_START|MIU_TA_CTL_ENABLE|MIU_TA_CTL_WRITE,
+			(void *)(mem_crb+MIU_TEST_AGT_CTRL));
+
+		for (j = 0; j < MAX_CTL_CHECK; j++) {
+			temp = readl(
+			     (void *)(mem_crb+MIU_TEST_AGT_CTRL));
+			if ((temp & MIU_TA_CTL_BUSY) == 0)
+				break;
+		}
+
+		if (j >= MAX_CTL_CHECK) {
+			printk("%s: %s Fail to write through agent\n",
+					__func__, netxen_nic_driver_name);
+			ret = -1;
+			break;
+		}
+	}
+
+	netxen_nic_pci_change_crbwindow_128M(adapter, 1);
+	write_unlock_irqrestore(&adapter->adapter_lock, flags);
+	return ret;
+}
+
+int
+netxen_nic_pci_mem_read_128M(struct netxen_adapter *adapter,
+		u64 off, void *data, int size)
+{
+	unsigned long   flags, mem_crb;
+	int	     i, j = 0, k, start, end, loop, sz[2], off0[2];
+	uint32_t      temp;
+	uint64_t      off8, val, word[2] = {0, 0};
+
+
+	/*
+	 * If not MN, go check for MS or invalid.
+	 */
+	if (netxen_nic_pci_mem_bound_check(adapter, off, size) == 0)
+		return netxen_nic_pci_mem_read_direct(adapter, off, data, size);
+
+	off8 = off & 0xfffffff8;
+	off0[0] = off & 0x7;
+	off0[1] = 0;
+	sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]);
+	sz[1] = size - sz[0];
+	loop = ((off0[0] + size - 1) >> 3) + 1;
+	mem_crb = (unsigned long)pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
+
+	write_lock_irqsave(&adapter->adapter_lock, flags);
+	netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+
+	for (i = 0; i < loop; i++) {
+		writel((uint32_t)(off8 + (i << 3)),
+			(void *)(mem_crb+MIU_TEST_AGT_ADDR_LO));
+		writel(0,
+			(void *)(mem_crb+MIU_TEST_AGT_ADDR_HI));
+		writel(MIU_TA_CTL_ENABLE,
+			(void *)(mem_crb+MIU_TEST_AGT_CTRL));
+		writel(MIU_TA_CTL_START|MIU_TA_CTL_ENABLE,
+			(void *)(mem_crb+MIU_TEST_AGT_CTRL));
+
+		for (j = 0; j < MAX_CTL_CHECK; j++) {
+			temp = readl(
+			      (void *)(mem_crb+MIU_TEST_AGT_CTRL));
+			if ((temp & MIU_TA_CTL_BUSY) == 0)
+				break;
+		}
+
+		if (j >= MAX_CTL_CHECK) {
+			printk(KERN_ERR "%s: %s Fail to read through agent\n",
+					__func__, netxen_nic_driver_name);
+			break;
+		}
+
+		start = off0[i] >> 2;
+		end   = (off0[i] + sz[i] - 1) >> 2;
+		for (k = start; k <= end; k++) {
+			word[i] |= ((uint64_t) readl(
+				    (void *)(mem_crb +
+				    MIU_TEST_AGT_RDDATA(k))) << (32*k));
+		}
+	}
+
+	netxen_nic_pci_change_crbwindow_128M(adapter, 1);
+	write_unlock_irqrestore(&adapter->adapter_lock, flags);
+
+	if (j >= MAX_CTL_CHECK)
+		return -1;
+
+	if (sz[0] == 8) {
+		val = word[0];
+	} else {
+		val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) |
+			((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8));
+	}
+
+	switch (size) {
+	case 1:
+		*(uint8_t  *)data = val;
+		break;
+	case 2:
+		*(uint16_t *)data = val;
+		break;
+	case 4:
+		*(uint32_t *)data = val;
+		break;
+	case 8:
+		*(uint64_t *)data = val;
+		break;
+	}
+	DPRINTK(1, INFO, "read %llx\n", *(unsigned long long *)data);
+	return 0;
+}
+
+int
+netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
+		u64 off, void *data, int size)
+{
+	int i, j, ret = 0, loop, sz[2], off0;
+	uint32_t temp;
+	uint64_t off8, mem_crb, tmpw, word[2] = {0, 0};
+
+	/*
+	 * If not MN, go check for MS or invalid.
+	 */
+	if (off >= NETXEN_ADDR_QDR_NET && off <= NETXEN_ADDR_QDR_NET_MAX_P3)
+		mem_crb = NETXEN_CRB_QDR_NET;
+	else {
+		mem_crb = NETXEN_CRB_DDR_NET;
+		if (netxen_nic_pci_mem_bound_check(adapter, off, size) == 0)
+			return netxen_nic_pci_mem_write_direct(adapter,
+					off, data, size);
+	}
+
+	off8 = off & 0xfffffff8;
+	off0 = off & 0x7;
+	sz[0] = (size < (8 - off0)) ? size : (8 - off0);
+	sz[1] = size - sz[0];
+	loop = ((off0 + size - 1) >> 3) + 1;
+
+	if ((size != 8) || (off0 != 0)) {
+		for (i = 0; i < loop; i++) {
+			if (adapter->pci_mem_read(adapter, off8 + (i << 3),
+						&word[i], 8))
+				return -1;
+		}
+	}
+
+	switch (size) {
+	case 1:
+		tmpw = *((uint8_t *)data);
+		break;
+	case 2:
+		tmpw = *((uint16_t *)data);
+		break;
+	case 4:
+		tmpw = *((uint32_t *)data);
+		break;
+	case 8:
+	default:
+		tmpw = *((uint64_t *)data);
+	break;
+	}
+
+	word[0] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8));
+	word[0] |= tmpw << (off0 * 8);
+
+	if (loop == 2) {
+		word[1] &= ~(~0ULL << (sz[1] * 8));
+		word[1] |= tmpw >> (sz[0] * 8);
+	}
+
+	/*
+	 * don't lock here - write_wx gets the lock if each time
+	 * write_lock_irqsave(&adapter->adapter_lock, flags);
+	 * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+	 */
+
+	for (i = 0; i < loop; i++) {
+		temp = off8 + (i << 3);
+		adapter->hw_write_wx(adapter,
+				mem_crb+MIU_TEST_AGT_ADDR_LO, &temp, 4);
+		temp = 0;
+		adapter->hw_write_wx(adapter,
+				mem_crb+MIU_TEST_AGT_ADDR_HI, &temp, 4);
+		temp = word[i] & 0xffffffff;
+		adapter->hw_write_wx(adapter,
+				mem_crb+MIU_TEST_AGT_WRDATA_LO, &temp, 4);
+		temp = (word[i] >> 32) & 0xffffffff;
+		adapter->hw_write_wx(adapter,
+				mem_crb+MIU_TEST_AGT_WRDATA_HI, &temp, 4);
+		temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE;
+		adapter->hw_write_wx(adapter,
+				mem_crb+MIU_TEST_AGT_CTRL, &temp, 4);
+		temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE;
+		adapter->hw_write_wx(adapter,
+				mem_crb+MIU_TEST_AGT_CTRL, &temp, 4);
+
+		for (j = 0; j < MAX_CTL_CHECK; j++) {
+			adapter->hw_read_wx(adapter,
+					mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+			if ((temp & MIU_TA_CTL_BUSY) == 0)
+				break;
+		}
+
+		if (j >= MAX_CTL_CHECK) {
+			printk(KERN_ERR "%s: Fail to write through agent\n",
+					netxen_nic_driver_name);
+			ret = -1;
+			break;
+		}
+	}
+
+	/*
+	 * netxen_nic_pci_change_crbwindow_128M(adapter, 1);
+	 * write_unlock_irqrestore(&adapter->adapter_lock, flags);
+	 */
+	return ret;
+}
+
+int
+netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
+		u64 off, void *data, int size)
+{
+	int i, j = 0, k, start, end, loop, sz[2], off0[2];
+	uint32_t      temp;
+	uint64_t      off8, val, mem_crb, word[2] = {0, 0};
+
+	/*
+	 * If not MN, go check for MS or invalid.
+	 */
+
+	if (off >= NETXEN_ADDR_QDR_NET && off <= NETXEN_ADDR_QDR_NET_MAX_P3)
+		mem_crb = NETXEN_CRB_QDR_NET;
+	else {
+		mem_crb = NETXEN_CRB_DDR_NET;
+		if (netxen_nic_pci_mem_bound_check(adapter, off, size) == 0)
+			return netxen_nic_pci_mem_read_direct(adapter,
+					off, data, size);
+	}
+
+	off8 = off & 0xfffffff8;
+	off0[0] = off & 0x7;
+	off0[1] = 0;
+	sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]);
+	sz[1] = size - sz[0];
+	loop = ((off0[0] + size - 1) >> 3) + 1;
+
+	/*
+	 * don't lock here - write_wx gets the lock if each time
+	 * write_lock_irqsave(&adapter->adapter_lock, flags);
+	 * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+	 */
+
+	for (i = 0; i < loop; i++) {
+		temp = off8 + (i << 3);
+		adapter->hw_write_wx(adapter,
+				mem_crb + MIU_TEST_AGT_ADDR_LO, &temp, 4);
+		temp = 0;
+		adapter->hw_write_wx(adapter,
+				mem_crb + MIU_TEST_AGT_ADDR_HI, &temp, 4);
+		temp = MIU_TA_CTL_ENABLE;
+		adapter->hw_write_wx(adapter,
+				mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+		temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE;
+		adapter->hw_write_wx(adapter,
+				mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+
+		for (j = 0; j < MAX_CTL_CHECK; j++) {
+			adapter->hw_read_wx(adapter,
+					mem_crb + MIU_TEST_AGT_CTRL, &temp, 4);
+			if ((temp & MIU_TA_CTL_BUSY) == 0)
+				break;
+		}
+
+		if (j >= MAX_CTL_CHECK) {
+			printk(KERN_ERR "%s: Fail to read through agent\n",
+					netxen_nic_driver_name);
+			break;
+		}
+
+		start = off0[i] >> 2;
+		end   = (off0[i] + sz[i] - 1) >> 2;
+		for (k = start; k <= end; k++) {
+			adapter->hw_read_wx(adapter,
+				mem_crb + MIU_TEST_AGT_RDDATA(k), &temp, 4);
+			word[i] |= ((uint64_t)temp << (32 * k));
+		}
+	}
+
+	/*
+	 * netxen_nic_pci_change_crbwindow_128M(adapter, 1);
+	 * write_unlock_irqrestore(&adapter->adapter_lock, flags);
+	 */
+
+	if (j >= MAX_CTL_CHECK)
+		return -1;
+
+	if (sz[0] == 8) {
+		val = word[0];
+	} else {
+		val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) |
+		((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8));
+	}
+
+	switch (size) {
+	case 1:
+		*(uint8_t  *)data = val;
+		break;
+	case 2:
+		*(uint16_t *)data = val;
+		break;
+	case 4:
+		*(uint32_t *)data = val;
+		break;
+	case 8:
+		*(uint64_t *)data = val;
+		break;
+	}
+	DPRINTK(1, INFO, "read %llx\n", *(unsigned long long *)data);
+	return 0;
+}
+
+/*
+ * Note : only 32-bit writes!
+ */
+int netxen_nic_pci_write_immediate_2M(struct netxen_adapter *adapter,
+		u64 off, u32 data)
+{
+	adapter->hw_write_wx(adapter, off, &data, 4);
+
+	return 0;
+}
+
+u32 netxen_nic_pci_read_immediate_2M(struct netxen_adapter *adapter, u64 off)
+{
+	u32 temp;
+	adapter->hw_read_wx(adapter, off, &temp, 4);
+	return temp;
+}
+
+void netxen_nic_pci_write_normalize_2M(struct netxen_adapter *adapter,
+		u64 off, u32 data)
+{
+	adapter->hw_write_wx(adapter, off, &data, 4);
+}
+
+u32 netxen_nic_pci_read_normalize_2M(struct netxen_adapter *adapter, u64 off)
+{
+	u32 temp;
+	adapter->hw_read_wx(adapter, off, &temp, 4);
+	return temp;
+}
+
 #if 0
 int
 netxen_nic_erase_pxe(struct netxen_adapter *adapter)
@@ -1006,19 +2147,10 @@ void netxen_nic_init_niu_gb(struct netxen_adapter *adapter)
 }
 
 void
-netxen_crb_writelit_adapter(struct netxen_adapter *adapter, unsigned long off,
-			    int data)
+netxen_crb_writelit_adapter(struct netxen_adapter *adapter,
+		unsigned long off, int data)
 {
-	void __iomem *addr;
-
-	if (ADDR_IN_WINDOW1(off)) {
-		writel(data, NETXEN_CRB_NORMALIZE(adapter, off));
-	} else {
-		netxen_nic_pci_change_crbwindow(adapter, 0);
-		addr = pci_base_offset(adapter, off);
-		writel(data, addr);
-		netxen_nic_pci_change_crbwindow(adapter, 1);
-	}
+	adapter->hw_write_wx(adapter, off, &data, 4);
 }
 
 void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
@@ -1105,12 +2237,9 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
 		addr += sizeof(u32);
 	}
 
-	fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
-					      NETXEN_FW_VERSION_MAJOR));
-	fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
-					      NETXEN_FW_VERSION_MINOR));
-	fw_build =
-	    readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
+	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_MAJOR, &fw_major, 4);
+	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_MINOR, &fw_minor, 4);
+	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_SUB, &fw_build, 4);
 
 	if (adapter->portnum == 0) {
 		get_brd_name_by_type(board_info->board_type, brd_name);
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index 90dd0579643..b8e0030f03d 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -82,19 +82,9 @@ struct netxen_adapter;
 
 #define NETXEN_PCI_MAPSIZE_BYTES  (NETXEN_PCI_MAPSIZE << 20)
 
-#define NETXEN_NIC_LOCKED_READ_REG(X, Y)	\
-	addr = pci_base_offset(adapter, X);	\
-	*(u32 *)Y = readl((void __iomem*) addr);
-
 struct netxen_port;
 void netxen_nic_set_link_parameters(struct netxen_adapter *adapter);
 void netxen_nic_flash_print(struct netxen_adapter *adapter);
-int netxen_nic_hw_write_wx(struct netxen_adapter *adapter, u64 off,
-			   void *data, int len);
-void netxen_crb_writelit_adapter(struct netxen_adapter *adapter,
-				 unsigned long off, int data);
-int netxen_nic_hw_read_wx(struct netxen_adapter *adapter, u64 off,
-			  void *data, int len);
 
 typedef u8 netxen_ethernet_macaddr_t[6];
 
@@ -503,4 +493,15 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter);
 
 int netxen_niu_disable_xg_port(struct netxen_adapter *adapter);
 
+typedef struct {
+	unsigned valid;
+	unsigned start_128M;
+	unsigned end_128M;
+	unsigned start_2M;
+} crb_128M_2M_sub_block_map_t;
+
+typedef struct {
+	crb_128M_2M_sub_block_map_t sub_block[16];
+} crb_128M_2M_block_map_t;
+
 #endif				/* __NETXEN_NIC_HW_H_ */
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index dfde5908209..7323cd7b544 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -124,7 +124,7 @@ int netxen_init_firmware(struct netxen_adapter *adapter)
 	u32 state = 0, loops = 0, err = 0;
 
 	/* Window 1 call */
-	state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
+	state = adapter->pci_read_normalize(adapter, CRB_CMDPEG_STATE);
 
 	if (state == PHAN_INITIALIZE_ACK)
 		return 0;
@@ -132,7 +132,7 @@ int netxen_init_firmware(struct netxen_adapter *adapter)
 	while (state != PHAN_INITIALIZE_COMPLETE && loops < 2000) {
 		udelay(100);
 		/* Window 1 call */
-		state = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
+		state = adapter->pci_read_normalize(adapter, CRB_CMDPEG_STATE);
 
 		loops++;
 	}
@@ -143,14 +143,14 @@ int netxen_init_firmware(struct netxen_adapter *adapter)
 		return err;
 	}
 	/* Window 1 call */
-	writel(INTR_SCHEME_PERPORT,
-	       NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_HOST));
-	writel(MSI_MODE_MULTIFUNC,
-	       NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_HOST));
-	writel(MPORT_MULTI_FUNCTION_MODE,
-	       NETXEN_CRB_NORMALIZE(adapter, CRB_MPORT_MODE));
-	writel(PHAN_INITIALIZE_ACK,
-	       NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
+	adapter->pci_write_normalize(adapter,
+			CRB_NIC_CAPABILITIES_HOST, INTR_SCHEME_PERPORT);
+	adapter->pci_write_normalize(adapter,
+			CRB_NIC_MSI_MODE_HOST, MSI_MODE_MULTIFUNC);
+	adapter->pci_write_normalize(adapter,
+			CRB_MPORT_MODE, MPORT_MULTI_FUNCTION_MODE);
+	adapter->pci_write_normalize(adapter,
+			CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
 
 	return err;
 }
@@ -811,7 +811,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 				buf[i].data = NETXEN_NIC_XDMA_RESET;
 			}
 
-			netxen_nic_hw_write_wx(adapter, off, &buf[i].data, 4);
+			adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
 
 			if (init_delay == 1) {
 				msleep(1000);
@@ -824,7 +824,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 		/* disable_peg_cache_all */
 
 		/* unreset_net_cache */
-		netxen_nic_hw_read_wx(adapter, NETXEN_ROMUSB_GLB_SW_RESET, &val,
+		adapter->hw_read_wx(adapter, NETXEN_ROMUSB_GLB_SW_RESET, &val,
 				      4);
 		netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
 					    (val & 0xffffff0f));
@@ -884,8 +884,8 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 	hi = (addr >> 32) & 0xffffffff;
 	lo = addr & 0xffffffff;
 
-	writel(hi, NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_DUMMY_BUF_ADDR_HI));
-	writel(lo, NETXEN_CRB_NORMALIZE(adapter, CRB_HOST_DUMMY_BUF_ADDR_LO));
+	adapter->pci_write_normalize(adapter, CRB_HOST_DUMMY_BUF_ADDR_HI, hi);
+	adapter->pci_write_normalize(adapter, CRB_HOST_DUMMY_BUF_ADDR_LO, lo);
 
 	return 0;
 }
@@ -924,10 +924,10 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 
 	if (!pegtune_val) {
 		do {
-			val = readl(NETXEN_CRB_NORMALIZE
-				  (adapter, CRB_CMDPEG_STATE));
-			pegtune_val = readl(NETXEN_CRB_NORMALIZE
-				  (adapter, NETXEN_ROMUSB_GLB_PEGTUNE_DONE));
+			val = adapter->pci_read_normalize(adapter,
+					CRB_CMDPEG_STATE);
+			pegtune_val = adapter->pci_read_normalize(adapter,
+					NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
 
 			if (val == PHAN_INITIALIZE_COMPLETE ||
 				val == PHAN_INITIALIZE_ACK)
@@ -951,7 +951,7 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter)
 	uint32_t temp, temp_state, temp_val;
 	int rv = 0;
 
-	temp = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_TEMP_STATE));
+	temp = adapter->pci_read_normalize(adapter, CRB_TEMP_STATE);
 
 	temp_state = nx_get_temp_state(temp);
 	temp_val = nx_get_temp_val(temp);
@@ -1119,8 +1119,8 @@ u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max)
 		recv_ctx->status_rx_consumer = consumer;
 
 		/* Window = 1 */
-		writel(consumer, NETXEN_CRB_NORMALIZE(adapter,
-					recv_ctx->crb_sts_consumer));
+		adapter->pci_write_normalize(adapter,
+				recv_ctx->crb_sts_consumer, consumer);
 	}
 
 	return count;
@@ -1264,9 +1264,9 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 		rcv_desc->begin_alloc = index;
 		rcv_desc->producer = producer;
 			/* Window = 1 */
-		writel((producer - 1) & (rcv_desc->max_rx_desc_count - 1),
-		       NETXEN_CRB_NORMALIZE(adapter,
-			       rcv_desc->crb_rcv_producer));
+		adapter->pci_write_normalize(adapter,
+				rcv_desc->crb_rcv_producer,
+				(producer-1) & (rcv_desc->max_rx_desc_count-1));
 			/*
 			 * Write a doorbell msg to tell phanmon of change in
 			 * receive ring producer
@@ -1344,9 +1344,9 @@ static void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 		rcv_desc->begin_alloc = index;
 		rcv_desc->producer = producer;
 			/* Window = 1 */
-		writel((producer - 1) & (rcv_desc->max_rx_desc_count - 1),
-		       NETXEN_CRB_NORMALIZE(adapter,
-			       rcv_desc->crb_rcv_producer));
+		adapter->pci_write_normalize(adapter,
+			rcv_desc->crb_rcv_producer,
+				(producer-1) & (rcv_desc->max_rx_desc_count-1));
 			wmb();
 	}
 }
diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c
index 96cec41f901..104c287d77a 100644
--- a/drivers/net/netxen/netxen_nic_isr.c
+++ b/drivers/net/netxen/netxen_nic_isr.c
@@ -144,7 +144,7 @@ static void netxen_nic_isr_other(struct netxen_adapter *adapter)
 	u32 val, linkup, qg_linksup;
 
 	/* verify the offset */
-	val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
+	val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
 	val = val >> adapter->physical_port;
 	if (val == adapter->ahw.qg_linksup)
 		return;
@@ -198,7 +198,7 @@ void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter)
 	u32 val;
 
 	/* WINDOW = 1 */
-	val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
+	val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
 	val >>= (adapter->physical_port * 8);
 	val &= 0xff;
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 192a22f8957..72d9f48b80d 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -114,11 +114,12 @@ static uint32_t crb_cmd_producer[4] = {
 	CRB_CMD_PRODUCER_OFFSET_2, CRB_CMD_PRODUCER_OFFSET_3
 };
 
-static void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
-					   uint32_t crb_producer)
+static inline void
+netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
+		uint32_t crb_producer)
 {
-	writel(crb_producer, NETXEN_CRB_NORMALIZE(adapter,
-				adapter->crb_addr_cmd_producer));
+	adapter->pci_write_normalize(adapter,
+			adapter->crb_addr_cmd_producer, crb_producer);
 }
 
 static uint32_t crb_cmd_consumer[4] = {
@@ -126,11 +127,12 @@ static uint32_t crb_cmd_consumer[4] = {
 	CRB_CMD_CONSUMER_OFFSET_2, CRB_CMD_CONSUMER_OFFSET_3
 };
 
-static void netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter,
-					   u32 crb_consumer)
+static inline void
+netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter,
+		u32 crb_consumer)
 {
-	writel(crb_consumer, NETXEN_CRB_NORMALIZE(adapter,
-				adapter->crb_addr_cmd_consumer));
+	adapter->pci_write_normalize(adapter,
+			adapter->crb_addr_cmd_consumer, crb_consumer);
 }
 
 static uint32_t msi_tgt_status[4] = {
@@ -151,17 +153,18 @@ static void netxen_nic_disable_int(struct netxen_adapter *adapter)
 	int pci_fn = adapter->ahw.pci_func;
 
 	if (adapter->msi_mode != MSI_MODE_MULTIFUNC)
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, sw_int_mask[port]));
+		adapter->pci_write_normalize(adapter, sw_int_mask[port], 0);
 
 	if (adapter->intr_scheme != -1 &&
 	    adapter->intr_scheme != INTR_SCHEME_PERPORT)
-		writel(mask,PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
 
 	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
 		do {
-			writel(0xffffffff,
-			       PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS));
-			mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR));
+			adapter->pci_write_immediate(adapter,
+					ISR_INT_TARGET_STATUS, 0xffffffff);
+			mask = adapter->pci_read_immediate(adapter,
+					ISR_INT_VECTOR);
 			if (!(mask & 0x80))
 				break;
 			udelay(10);
@@ -173,8 +176,8 @@ static void netxen_nic_disable_int(struct netxen_adapter *adapter)
 		}
 	} else {
 		if (adapter->msi_mode == MSI_MODE_MULTIFUNC) {
-			writel(0xffffffff, PCI_OFFSET_SECOND_RANGE(adapter,
-						msi_tgt_status[pci_fn]));
+			adapter->pci_write_immediate(adapter,
+					msi_tgt_status[pci_fn], 0xffffffff);
 		}
 	}
 }
@@ -200,19 +203,20 @@ static void netxen_nic_enable_int(struct netxen_adapter *adapter)
 			break;
 		}
 
-		writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
 	}
 
-	writel(0x1, NETXEN_CRB_NORMALIZE(adapter, sw_int_mask[port]));
+	adapter->pci_write_normalize(adapter, sw_int_mask[port], 0x1);
 
 	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
 		mask = 0xbff;
 		if (adapter->intr_scheme != -1 &&
 			adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-			writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+			adapter->pci_write_normalize(adapter,
+					CRB_INT_VECTOR, 0);
 		}
-		writel(mask,
-		       PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK));
+		adapter->pci_write_immediate(adapter,
+				ISR_INT_TARGET_MASK, mask);
 	}
 
 	DPRINTK(1, INFO, "Done with enable Int\n");
@@ -243,7 +247,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 
 	u8 __iomem *db_ptr = NULL;
-	unsigned long mem_base, mem_len, db_base, db_len;
+	unsigned long mem_base, mem_len, db_base, db_len, pci_len0;
 	int pci_using_dac, i = 0, err;
 	int ring;
 	struct netxen_recv_context *recv_ctx = NULL;
@@ -300,10 +304,24 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter = netdev->priv;
 
 	adapter->ahw.pci_func  = pci_func_id;
+	rwlock_init(&adapter->adapter_lock);
+	adapter->ahw.qdr_sn_window = -1;
+	adapter->ahw.ddr_mn_window = -1;
 
 	/* remap phys address */
 	mem_base = pci_resource_start(pdev, 0);	/* 0 is for BAR 0 */
 	mem_len = pci_resource_len(pdev, 0);
+	pci_len0 = 0;
+
+	adapter->hw_write_wx = netxen_nic_hw_write_wx_128M;
+	adapter->hw_read_wx = netxen_nic_hw_read_wx_128M;
+	adapter->pci_read_immediate = netxen_nic_pci_read_immediate_128M;
+	adapter->pci_write_immediate = netxen_nic_pci_write_immediate_128M;
+	adapter->pci_read_normalize = netxen_nic_pci_read_normalize_128M;
+	adapter->pci_write_normalize = netxen_nic_pci_write_normalize_128M;
+	adapter->pci_set_window = netxen_nic_pci_set_window_128M;
+	adapter->pci_mem_read = netxen_nic_pci_mem_read_128M;
+	adapter->pci_mem_write = netxen_nic_pci_mem_write_128M;
 
 	/* 128 Meg of memory */
 	if (mem_len == NETXEN_PCI_128MB_SIZE) {
@@ -320,21 +338,42 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			SECOND_PAGE_GROUP_START, THIRD_PAGE_GROUP_SIZE);
 		first_page_group_start = 0;
 		first_page_group_end   = 0;
+	} else if (mem_len == NETXEN_PCI_2MB_SIZE) {
+		adapter->hw_write_wx = netxen_nic_hw_write_wx_2M;
+		adapter->hw_read_wx = netxen_nic_hw_read_wx_2M;
+		adapter->pci_read_immediate = netxen_nic_pci_read_immediate_2M;
+		adapter->pci_write_immediate =
+			netxen_nic_pci_write_immediate_2M;
+		adapter->pci_read_normalize = netxen_nic_pci_read_normalize_2M;
+		adapter->pci_write_normalize =
+			netxen_nic_pci_write_normalize_2M;
+		adapter->pci_set_window = netxen_nic_pci_set_window_2M;
+		adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
+		adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
+
+		mem_ptr0 = ioremap(mem_base, mem_len);
+		pci_len0 = mem_len;
+		first_page_group_start = 0;
+		first_page_group_end   = 0;
+
+		adapter->ahw.ddr_mn_window = 0;
+		adapter->ahw.qdr_sn_window = 0;
+
+		adapter->ahw.mn_win_crb = 0x100000 + PCIX_MN_WINDOW +
+			(pci_func_id * 0x20);
+		adapter->ahw.ms_win_crb = 0x100000 + PCIX_SN_WINDOW;
+		if (pci_func_id < 4)
+			adapter->ahw.ms_win_crb += (pci_func_id * 0x20);
+		else
+			adapter->ahw.ms_win_crb +=
+					0xA0 + ((pci_func_id - 4) * 0x10);
 	} else {
 		err = -EIO;
 		goto err_out_free_netdev;
 	}
 
-	if ((!mem_ptr0 && mem_len == NETXEN_PCI_128MB_SIZE) ||
-			!mem_ptr1 || !mem_ptr2) {
-		DPRINTK(ERR,
-			"Cannot remap adapter memory aborting.:"
-			"0 -> %p, 1 -> %p, 2 -> %p\n",
-			mem_ptr0, mem_ptr1, mem_ptr2);
+	dev_info(&pdev->dev, "%dMB memory map\n", (int)(mem_len>>20));
 
-		err = -EIO;
-		goto err_out_iounmap;
-	}
 	db_base = pci_resource_start(pdev, 4);	/* doorbell is on bar 4 */
 	db_len = pci_resource_len(pdev, 4);
 
@@ -357,6 +396,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	DPRINTK(INFO, "doorbell ioremaped at %p\n", db_ptr);
 
 	adapter->ahw.pci_base0 = mem_ptr0;
+	adapter->ahw.pci_len0 = pci_len0;
 	adapter->ahw.first_page_group_start = first_page_group_start;
 	adapter->ahw.first_page_group_end   = first_page_group_end;
 	adapter->ahw.pci_base1 = mem_ptr1;
@@ -520,9 +560,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
 	adapter->ahw.revision_id = pdev->revision;
 
-	/* make sure Window == 1 */
-	netxen_nic_pci_change_crbwindow(adapter, 1);
-
 	adapter->crb_addr_cmd_producer = crb_cmd_producer[adapter->portnum];
 	adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum];
 	netxen_nic_update_cmd_producer(adapter, 0);
@@ -560,8 +597,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		err = netxen_initialize_adapter_offload(adapter);
 		if (err)
 			goto err_out_free_rx_buffer;
-		val = readl(NETXEN_CRB_NORMALIZE(adapter,
-					NETXEN_CAM_RAM(0x1fc)));
+		val = adapter->pci_read_normalize(adapter,
+				NETXEN_CAM_RAM(0x1fc));
 		if (val == 0x55555555) {
 		    /* This is the first boot after power up */
 		    netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(0x4), &val);
@@ -573,20 +610,20 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 					printk(KERN_ERR "%s: failed to set MSI bit in PCI-e reg\n",
 							netxen_nic_driver_name);
 			}
-		    val = readl(NETXEN_CRB_NORMALIZE(adapter,
-					NETXEN_ROMUSB_GLB_SW_RESET));
+		    val = adapter->pci_read_normalize(adapter,
+					NETXEN_ROMUSB_GLB_SW_RESET);
 		    printk(KERN_INFO"NetXen: read 0x%08x for reset reg.\n",val);
 		    if (val != 0x80000f) {
 			/* clear the register for future unloads/loads */
-				writel(0, NETXEN_CRB_NORMALIZE(adapter,
-							NETXEN_CAM_RAM(0x1fc)));
+				adapter->pci_write_normalize(adapter,
+						NETXEN_CAM_RAM(0x1fc), 0);
 				printk(KERN_ERR "ERROR in NetXen HW init sequence.\n");
 				err = -ENODEV;
 				goto err_out_free_dev;
 		    }
 		} else {
-			writel(0, NETXEN_CRB_NORMALIZE(adapter,
-						CRB_CMDPEG_STATE));
+			adapter->pci_write_normalize(adapter,
+						CRB_CMDPEG_STATE, 0);
 			netxen_pinit_from_rom(adapter, 0);
 			msleep(1);
 			netxen_load_firmware(adapter);
@@ -602,9 +639,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 
 		/* clear the register for future unloads/loads */
-		writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
+		adapter->pci_write_normalize(adapter, NETXEN_CAM_RAM(0x1fc), 0);
 		dev_info(&pdev->dev, "cmdpeg state: 0x%0x\n",
-			readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
+			adapter->pci_read_normalize(adapter, CRB_CMDPEG_STATE));
 
 		/*
 		 * Tell the hardware our version number.
@@ -612,12 +649,11 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		i = (_NETXEN_NIC_LINUX_MAJOR << 16)
 			| ((_NETXEN_NIC_LINUX_MINOR << 8))
 			| (_NETXEN_NIC_LINUX_SUBVERSION);
-		writel(i, NETXEN_CRB_NORMALIZE(adapter, CRB_DRIVER_VERSION));
+		adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, i);
 
 		/* Unlock the HW, prompting the boot sequence */
-		writel(1,
-			NETXEN_CRB_NORMALIZE(adapter,
-				NETXEN_ROMUSB_GLB_PEGTUNE_DONE));
+		adapter->pci_write_normalize(adapter,
+				NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
 		/* Handshake with the card before we register the devices. */
 		netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
 	}
@@ -626,7 +662,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * See if the firmware gave us a virtual-physical port mapping.
 	 */
 	adapter->physical_port = adapter->portnum;
-	i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum)));
+	i = adapter->pci_read_normalize(adapter, CRB_V2P(adapter->portnum));
 	if (i != 0x55555555)
 		adapter->physical_port = i;
 
@@ -1104,15 +1140,15 @@ static irqreturn_t netxen_intr(int irq, void *data)
 	struct netxen_adapter *adapter = data;
 	u32 our_int = 0;
 
-	our_int = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+	our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
 	/* not our interrupt */
 	if ((our_int & (0x80 << adapter->portnum)) == 0)
 		return IRQ_NONE;
 
 	if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
 		/* claim interrupt */
-		writel(our_int & ~((u32)(0x80 << adapter->portnum)),
-			NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+		adapter->pci_write_normalize(adapter, CRB_INT_VECTOR,
+				our_int & ~((u32)(0x80 << adapter->portnum)));
 	}
 
 	netxen_handle_int(adapter);
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index d9664a0e08b..78905d9dd4b 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -46,9 +46,8 @@ static int phy_lock(struct netxen_adapter *adapter)
 	int done = 0, timeout = 0;
 
 	while (!done) {
-		done =
-		    readl(pci_base_offset
-			  (adapter, NETXEN_PCIE_REG(PCIE_SEM3_LOCK)));
+		done = netxen_nic_reg_read(adapter,
+				NETXEN_PCIE_REG(PCIE_SEM3_LOCK));
 		if (done == 1)
 			break;
 		if (timeout >= phy_lock_timeout) {
@@ -63,14 +62,14 @@ static int phy_lock(struct netxen_adapter *adapter)
 		}
 	}
 
-	writel(PHY_LOCK_DRIVER,
-	       NETXEN_CRB_NORMALIZE(adapter, NETXEN_PHY_LOCK_ID));
+	netxen_crb_writelit_adapter(adapter,
+			NETXEN_PHY_LOCK_ID, PHY_LOCK_DRIVER);
 	return 0;
 }
 
 static int phy_unlock(struct netxen_adapter *adapter)
 {
-	readl(pci_base_offset(adapter, NETXEN_PCIE_REG(PCIE_SEM3_UNLOCK)));
+	adapter->pci_read_immediate(adapter, NETXEN_PCIE_REG(PCIE_SEM3_UNLOCK));
 
 	return 0;
 }
@@ -109,7 +108,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 	 * so it cannot be in reset
 	 */
 
-	if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
+	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
 				  &mac_cfg0, 4))
 		return -EIO;
 	if (netxen_gb_get_soft_reset(mac_cfg0)) {
@@ -119,7 +118,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 		netxen_gb_rx_reset_pb(temp);
 		netxen_gb_tx_reset_mac(temp);
 		netxen_gb_rx_reset_mac(temp);
-		if (netxen_nic_hw_write_wx(adapter,
+		if (adapter->hw_write_wx(adapter,
 					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
 					   &temp, 4))
 			return -EIO;
@@ -129,22 +128,22 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 	address = 0;
 	netxen_gb_mii_mgmt_reg_addr(address, reg);
 	netxen_gb_mii_mgmt_phy_addr(address, phy);
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
 				   &address, 4))
 		return -EIO;
 	command = 0;		/* turn off any prior activity */
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
 				   &command, 4))
 		return -EIO;
 	/* send read command */
 	netxen_gb_mii_mgmt_set_read_cycle(command);
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
 				   &command, 4))
 		return -EIO;
 
 	status = 0;
 	do {
-		if (netxen_nic_hw_read_wx(adapter,
+		if (adapter->hw_read_wx(adapter,
 					  NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
 					  &status, 4))
 			return -EIO;
@@ -154,7 +153,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 		 && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
 
 	if (timeout < NETXEN_NIU_PHY_WAITMAX) {
-		if (netxen_nic_hw_read_wx(adapter,
+		if (adapter->hw_read_wx(adapter,
 					  NETXEN_NIU_GB_MII_MGMT_STATUS(0),
 					  readval, 4))
 			return -EIO;
@@ -163,7 +162,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 		result = -1;
 
 	if (restore)
-		if (netxen_nic_hw_write_wx(adapter,
+		if (adapter->hw_write_wx(adapter,
 					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
 					   &mac_cfg0, 4))
 			return -EIO;
@@ -201,7 +200,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 	 * cannot be in reset
 	 */
 
-	if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
+	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
 				  &mac_cfg0, 4))
 		return -EIO;
 	if (netxen_gb_get_soft_reset(mac_cfg0)) {
@@ -212,7 +211,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 		netxen_gb_tx_reset_mac(temp);
 		netxen_gb_rx_reset_mac(temp);
 
-		if (netxen_nic_hw_write_wx(adapter,
+		if (adapter->hw_write_wx(adapter,
 					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
 					   &temp, 4))
 			return -EIO;
@@ -220,24 +219,24 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 	}
 
 	command = 0;		/* turn off any prior activity */
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
 				   &command, 4))
 		return -EIO;
 
 	address = 0;
 	netxen_gb_mii_mgmt_reg_addr(address, reg);
 	netxen_gb_mii_mgmt_phy_addr(address, phy);
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
 				   &address, 4))
 		return -EIO;
 
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0),
 				   &val, 4))
 		return -EIO;
 
 	status = 0;
 	do {
-		if (netxen_nic_hw_read_wx(adapter,
+		if (adapter->hw_read_wx(adapter,
 					  NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
 					  &status, 4))
 			return -EIO;
@@ -252,7 +251,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
 
 	/* restore the state of port 0 MAC in case we tampered with it */
 	if (restore)
-		if (netxen_nic_hw_write_wx(adapter,
+		if (adapter->hw_write_wx(adapter,
 					   NETXEN_NIU_GB_MAC_CONFIG_0(0),
 					   &mac_cfg0, 4))
 			return -EIO;
@@ -581,10 +580,10 @@ static int netxen_niu_macaddr_get(struct netxen_adapter *adapter,
 	if ((phy < 0) || (phy > 3))
 		return -EINVAL;
 
-	if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy),
+	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy),
 				  &stationhigh, 4))
 		return -EIO;
-	if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy),
+	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy),
 				  &stationlow, 4))
 		return -EIO;
 	((__le32 *)val)[1] = cpu_to_le32(stationhigh);
@@ -613,14 +612,14 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
 		temp[0] = temp[1] = 0;
 		memcpy(temp + 2, addr, 2);
 		val = le32_to_cpu(*(__le32 *)temp);
-		if (netxen_nic_hw_write_wx
-		    (adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy), &val, 4))
+		if (adapter->hw_write_wx(adapter,
+				NETXEN_NIU_GB_STATION_ADDR_1(phy), &val, 4))
 			return -EIO;
 
 		memcpy(temp, ((u8 *) addr) + 2, sizeof(__le32));
 		val = le32_to_cpu(*(__le32 *)temp);
-		if (netxen_nic_hw_write_wx
-		    (adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy), &val, 4))
+		if (adapter->hw_write_wx(adapter,
+				NETXEN_NIU_GB_STATION_ADDR_0(phy), &val, 4))
 			return -2;
 
 		netxen_niu_macaddr_get(adapter,
@@ -654,7 +653,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
 
 	mac_cfg0 = 0;
 	netxen_gb_soft_reset(mac_cfg0);
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
 				   &mac_cfg0, 4))
 		return -EIO;
 	mac_cfg0 = 0;
@@ -666,7 +665,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
 	netxen_gb_tx_reset_mac(mac_cfg0);
 	netxen_gb_rx_reset_mac(mac_cfg0);
 
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
 				   &mac_cfg0, 4))
 		return -EIO;
 	mac_cfg1 = 0;
@@ -679,7 +678,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
 
 	if (mode == NETXEN_NIU_10_100_MB) {
 		netxen_gb_set_intfmode(mac_cfg1, 1);
-		if (netxen_nic_hw_write_wx(adapter,
+		if (adapter->hw_write_wx(adapter,
 					   NETXEN_NIU_GB_MAC_CONFIG_1(port),
 					   &mac_cfg1, 4))
 			return -EIO;
@@ -692,7 +691,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
 
 	} else if (mode == NETXEN_NIU_1000_MB) {
 		netxen_gb_set_intfmode(mac_cfg1, 2);
-		if (netxen_nic_hw_write_wx(adapter,
+		if (adapter->hw_write_wx(adapter,
 					   NETXEN_NIU_GB_MAC_CONFIG_1(port),
 					   &mac_cfg1, 4))
 			return -EIO;
@@ -704,7 +703,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
 	}
 	mii_cfg = 0;
 	netxen_gb_set_mii_mgmt_clockselect(mii_cfg, 7);
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port),
 				   &mii_cfg, 4))
 		return -EIO;
 	mac_cfg0 = 0;
@@ -713,7 +712,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
 	netxen_gb_unset_rx_flowctl(mac_cfg0);
 	netxen_gb_unset_tx_flowctl(mac_cfg0);
 
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
 				   &mac_cfg0, 4))
 		return -EIO;
 	return 0;
@@ -730,7 +729,7 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
 		return -EINVAL;
 	mac_cfg0 = 0;
 	netxen_gb_soft_reset(mac_cfg0);
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
 				   &mac_cfg0, 4))
 		return -EIO;
 	return 0;
@@ -746,7 +745,7 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 		return -EINVAL;
 
 	mac_cfg = 0;
-	if (netxen_nic_hw_write_wx(adapter,
+	if (adapter->hw_write_wx(adapter,
 		NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), &mac_cfg, 4))
 		return -EIO;
 	return 0;
@@ -763,7 +762,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 		return -EINVAL;
 
 	/* save previous contents */
-	if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
+	if (adapter->hw_read_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
 				  &reg, 4))
 		return -EIO;
 	if (mode == NETXEN_NIU_PROMISC_MODE) {
@@ -801,7 +800,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 			return -EIO;
 		}
 	}
-	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
+	if (adapter->hw_write_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
 				   &reg, 4))
 		return -EIO;
 	return 0;
@@ -826,13 +825,13 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
 	case 0:
 	    memcpy(temp + 2, addr, 2);
 	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
+	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
 				&val, 4))
 		return -EIO;
 
 	    memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32));
 	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
+	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
 				&val, 4))
 		return -EIO;
 	    break;
@@ -840,13 +839,13 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
 	case 1:
 	    memcpy(temp + 2, addr, 2);
 	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_1,
+	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_1,
 				&val, 4))
 		return -EIO;
 
 	    memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32));
 	    val = le32_to_cpu(*(__le32 *)temp);
-	    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_HI,
+	    if (adapter->hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_HI,
 				&val, 4))
 		return -EIO;
 	    break;
@@ -877,10 +876,10 @@ int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter,
 	if (phy != 0)
 		return -EINVAL;
 
-	if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
+	if (adapter->hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
 				  &stationhigh, 4))
 		return -EIO;
-	if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
+	if (adapter->hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
 				  &stationlow, 4))
 		return -EIO;
 	((__le32 *)val)[1] = cpu_to_le32(stationhigh);
@@ -901,7 +900,7 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
 
-	if (netxen_nic_hw_read_wx(adapter,
+	if (adapter->hw_read_wx(adapter,
 		NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), &reg, 4))
 			return -EIO;
 	if (mode == NETXEN_NIU_PROMISC_MODE)
-- 
cgit v1.2.3


From 2956640d4aaaecd42bd8ba800cc8c33bfe206b7e Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:04 -0700
Subject: netxen: pci probe and firmware init changes

Add initialization code in pci probe for new chip and retain
compatibility with old revisions.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h      |  40 +-
 drivers/net/netxen/netxen_nic_hw.c   |  71 +---
 drivers/net/netxen/netxen_nic_init.c | 404 +++++++++++++-----
 drivers/net/netxen/netxen_nic_main.c | 795 +++++++++++++++++++++++------------
 4 files changed, 872 insertions(+), 438 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 29ab2ce30d6..b23a5a447f0 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -801,6 +801,7 @@ struct netxen_hardware_context {
 	unsigned long db_len;
 	unsigned long pci_len0;
 
+	u8 cut_through;
 	int qdr_sn_window;
 	int ddr_mn_window;
 	unsigned long mn_win_crb;
@@ -871,9 +872,16 @@ struct netxen_recv_context {
 	struct status_desc *rcv_status_desc_head;
 };
 
-#define NETXEN_NIC_MSI_ENABLED 0x02
-#define NETXEN_DMA_MASK	0xfffffffe
-#define NETXEN_DB_MAPSIZE_BYTES    0x1000
+#define NETXEN_NIC_MSI_ENABLED		0x02
+#define NETXEN_NIC_MSIX_ENABLED		0x04
+#define NETXEN_IS_MSI_FAMILY(adapter) \
+	((adapter)->flags & (NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED))
+
+#define MSIX_ENTRIES_PER_ADAPTER	8
+#define NETXEN_MSIX_TBL_SPACE		8192
+#define NETXEN_PCI_REG_MSIX_TBL		0x44
+
+#define NETXEN_DB_MAPSIZE_BYTES    	0x1000
 
 struct netxen_dummy_dma {
 	void *addr;
@@ -885,6 +893,7 @@ struct netxen_adapter {
 
 	struct net_device *netdev;
 	struct pci_dev *pdev;
+	int pci_using_dac;
 	struct napi_struct napi;
 	struct net_device_stats net_stats;
 	unsigned char mac_addr[ETH_ALEN];
@@ -895,6 +904,8 @@ struct netxen_adapter {
 	uint8_t		mc_enabled;
 	uint8_t		max_mc_count;
 
+	struct netxen_legacy_intr_set legacy_intr;
+
 	struct work_struct watchdog_task;
 	struct timer_list watchdog_timer;
 	struct work_struct  tx_timeout_task;
@@ -903,6 +914,8 @@ struct netxen_adapter {
 	u32 crb_win;
 	rwlock_t adapter_lock;
 
+	uint64_t dma_mask;
+
 	u32 cmd_producer;
 	__le32 *cmd_consumer;
 	u32 last_cmd_consumer;
@@ -919,6 +932,12 @@ struct netxen_adapter {
 	int driver_mismatch;
 	u32 temp;
 
+	u32 fw_major;
+
+	u8 msix_supported;
+	u8 max_possible_rss_rings;
+	struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER];
+
 	struct netxen_adapter_stats stats;
 
 	u16 link_speed;
@@ -1092,8 +1111,10 @@ unsigned long netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
 void netxen_free_adapter_offload(struct netxen_adapter *adapter);
 int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
 int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
+int netxen_receive_peg_ready(struct netxen_adapter *adapter);
 int netxen_load_firmware(struct netxen_adapter *adapter);
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
+
 int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp);
 int netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr,
 				u8 *bytes, size_t size);
@@ -1107,14 +1128,19 @@ void netxen_halt_pegs(struct netxen_adapter *adapter);
 
 int netxen_rom_se(struct netxen_adapter *adapter, int addr);
 
-/* Functions from netxen_nic_isr.c */
-void netxen_initialize_adapter_sw(struct netxen_adapter *adapter);
+int netxen_alloc_sw_resources(struct netxen_adapter *adapter);
+void netxen_free_sw_resources(struct netxen_adapter *adapter);
+
+int netxen_alloc_hw_resources(struct netxen_adapter *adapter);
+void netxen_free_hw_resources(struct netxen_adapter *adapter);
+
+void netxen_release_rx_buffers(struct netxen_adapter *adapter);
+void netxen_release_tx_buffers(struct netxen_adapter *adapter);
+
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
 int netxen_init_firmware(struct netxen_adapter *adapter);
-void netxen_free_hw_resources(struct netxen_adapter *adapter);
 void netxen_tso_check(struct netxen_adapter *adapter,
 		      struct cmd_desc_type0 *desc, struct sk_buff *skb);
-int netxen_nic_hw_resources(struct netxen_adapter *adapter);
 void netxen_nic_clear_stats(struct netxen_adapter *adapter);
 void netxen_watchdog_task(struct work_struct *work);
 void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index defbeeac5db..fde8c6f1c9f 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -359,8 +359,6 @@ static u64 ctx_addr_sig_regs[][3] = {
 #define ADDR_IN_RANGE(addr, low, high)	\
 	(((addr) <= (high)) && ((addr) >= (low)))
 
-#define NETXEN_FLASH_BASE	(NETXEN_BOOTLD_START)
-#define NETXEN_PHANTOM_MEM_BASE	(NETXEN_FLASH_BASE)
 #define NETXEN_MAX_MTU		8000 + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE
 #define NETXEN_MIN_MTU		64
 #define NETXEN_ETH_FCS_SIZE     4
@@ -381,8 +379,6 @@ static u64 ctx_addr_sig_regs[][3] = {
 
 #define NETXEN_NIC_WINDOW_MARGIN 0x100000
 
-void netxen_free_hw_resources(struct netxen_adapter *adapter);
-
 int netxen_nic_set_mac(struct net_device *netdev, void *p)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
@@ -564,41 +560,22 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
  * check if the firmware has been downloaded and ready to run  and
  * setup the address for the descriptors in the adapter
  */
-int netxen_nic_hw_resources(struct netxen_adapter *adapter)
+int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
 {
 	struct netxen_hardware_context *hw = &adapter->ahw;
 	u32 state = 0;
 	void *addr;
-	int loops = 0, err = 0;
+	int err = 0;
 	int ctx, ring;
 	struct netxen_recv_context *recv_ctx;
 	struct netxen_rcv_desc_ctx *rcv_desc;
 	int func_id = adapter->portnum;
 
-	DPRINTK(INFO, "crb_base: %lx %x", NETXEN_PCI_CRBSPACE,
-		PCI_OFFSET_SECOND_RANGE(adapter, NETXEN_PCI_CRBSPACE));
-	DPRINTK(INFO, "cam base: %lx %x", NETXEN_CRB_CAM,
-		pci_base_offset(adapter, NETXEN_CRB_CAM));
-	DPRINTK(INFO, "cam RAM: %lx %x", NETXEN_CAM_RAM_BASE,
-		pci_base_offset(adapter, NETXEN_CAM_RAM_BASE));
-
-
-	for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
-		loops = 0;
-		state = 0;
-		do {
-			/* Window 1 call */
-			state = adapter->pci_read_normalize(adapter,
-					CRB_RCVPEG_STATE);
-			msleep(1);
-			loops++;
-		} while (state != PHAN_PEG_RCV_INITIALIZED && loops < 20);
-		if (loops >= 20) {
-			printk(KERN_ERR "Rcv Peg initialization not complete:"
-			       "%x.\n", state);
-			err = -EIO;
-			return err;
-		}
+	err = netxen_receive_peg_ready(adapter);
+	if (err) {
+		printk(KERN_ERR "Rcv Peg initialization not complete:%x.\n",
+				state);
+		return err;
 	}
 	adapter->intr_scheme = adapter->pci_read_normalize(adapter,
 			CRB_NIC_CAPABILITIES_FW);
@@ -992,10 +969,12 @@ int netxen_load_firmware(struct netxen_adapter *adapter)
 {
 	int i;
 	u32 data, size = 0;
-	u32 flashaddr = NETXEN_FLASH_BASE, memaddr = NETXEN_PHANTOM_MEM_BASE;
+	u32 flashaddr = NETXEN_BOOTLD_START, memaddr = NETXEN_BOOTLD_START;
+
+	size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START)/4;
 
-	size = NETXEN_FIRMWARE_LEN;
-	adapter->pci_write_normalize(adapter,
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		adapter->pci_write_normalize(adapter,
 				NETXEN_ROMUSB_GLB_CAS_RST, 1);
 
 	for (i = 0; i < size; i++) {
@@ -1007,12 +986,17 @@ int netxen_load_firmware(struct netxen_adapter *adapter)
 		memaddr += 4;
 		cond_resched();
 	}
-	udelay(100);
-	/* make sure Casper is powered on */
-	adapter->pci_write_normalize(adapter,
+	msleep(1);
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		adapter->pci_write_normalize(adapter,
+				NETXEN_ROMUSB_GLB_SW_RESET, 0x80001d);
+	else {
+		adapter->pci_write_normalize(adapter,
 				NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);
-	adapter->pci_write_normalize(adapter,
+		adapter->pci_write_normalize(adapter,
 				NETXEN_ROMUSB_GLB_CAS_RST, 0);
+	}
 
 	return 0;
 }
@@ -2241,6 +2225,8 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
 	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_MINOR, &fw_minor, 4);
 	adapter->hw_read_wx(adapter, NETXEN_FW_VERSION_SUB, &fw_build, 4);
 
+	adapter->fw_major = fw_major;
+
 	if (adapter->portnum == 0) {
 		get_brd_name_by_type(board_info->board_type, brd_name);
 
@@ -2262,16 +2248,5 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
 				adapter->netdev->name);
 		return;
 	}
-
-	switch (adapter->ahw.board_type) {
-	case NETXEN_NIC_GBE:
-		dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
-				adapter->netdev->name);
-		break;
-	case NETXEN_NIC_XGBE:
-		dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n",
-				adapter->netdev->name);
-		break;
-	}
 }
 
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 7323cd7b544..c6e2bc71d8f 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -130,7 +130,7 @@ int netxen_init_firmware(struct netxen_adapter *adapter)
 		return 0;
 
 	while (state != PHAN_INITIALIZE_COMPLETE && loops < 2000) {
-		udelay(100);
+		msleep(1);
 		/* Window 1 call */
 		state = adapter->pci_read_normalize(adapter, CRB_CMDPEG_STATE);
 
@@ -155,34 +155,165 @@ int netxen_init_firmware(struct netxen_adapter *adapter)
 	return err;
 }
 
-void netxen_initialize_adapter_sw(struct netxen_adapter *adapter)
+void netxen_release_rx_buffers(struct netxen_adapter *adapter)
 {
-	int ctxid, ring;
-	u32 i;
-	u32 num_rx_bufs = 0;
+	struct netxen_recv_context *recv_ctx;
 	struct netxen_rcv_desc_ctx *rcv_desc;
+	struct netxen_rx_buffer *rx_buf;
+	int i, ctxid, ring;
 
-	DPRINTK(INFO, "initializing some queues: %p\n", adapter);
 	for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) {
+		recv_ctx = &adapter->recv_ctx[ctxid];
 		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			struct netxen_rx_buffer *rx_buf;
-			rcv_desc = &adapter->recv_ctx[ctxid].rcv_desc[ring];
+			rcv_desc = &recv_ctx->rcv_desc[ring];
+			for (i = 0; i < rcv_desc->max_rx_desc_count; ++i) {
+				rx_buf = &(rcv_desc->rx_buf_arr[i]);
+				if (rx_buf->state == NETXEN_BUFFER_FREE)
+					continue;
+				pci_unmap_single(adapter->pdev,
+						rx_buf->dma,
+						rcv_desc->dma_size,
+						PCI_DMA_FROMDEVICE);
+				if (rx_buf->skb != NULL)
+					dev_kfree_skb_any(rx_buf->skb);
+			}
+		}
+	}
+}
+
+void netxen_release_tx_buffers(struct netxen_adapter *adapter)
+{
+	struct netxen_cmd_buffer *cmd_buf;
+	struct netxen_skb_frag *buffrag;
+	int i, j;
+
+	cmd_buf = adapter->cmd_buf_arr;
+	for (i = 0; i < adapter->max_tx_desc_count; i++) {
+		buffrag = cmd_buf->frag_array;
+		if (buffrag->dma) {
+			pci_unmap_single(adapter->pdev, buffrag->dma,
+					 buffrag->length, PCI_DMA_TODEVICE);
+			buffrag->dma = 0ULL;
+		}
+		for (j = 0; j < cmd_buf->frag_count; j++) {
+			buffrag++;
+			if (buffrag->dma) {
+				pci_unmap_page(adapter->pdev, buffrag->dma,
+					       buffrag->length,
+					       PCI_DMA_TODEVICE);
+				buffrag->dma = 0ULL;
+			}
+		}
+		/* Free the skb we received in netxen_nic_xmit_frame */
+		if (cmd_buf->skb) {
+			dev_kfree_skb_any(cmd_buf->skb);
+			cmd_buf->skb = NULL;
+		}
+		cmd_buf++;
+	}
+}
+
+void netxen_free_sw_resources(struct netxen_adapter *adapter)
+{
+	struct netxen_recv_context *recv_ctx;
+	struct netxen_rcv_desc_ctx *rcv_desc;
+	int ctx, ring;
+
+	for (ctx = 0; ctx < MAX_RCV_CTX; ctx++) {
+		recv_ctx = &adapter->recv_ctx[ctx];
+		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
+			rcv_desc = &recv_ctx->rcv_desc[ring];
+			if (rcv_desc->rx_buf_arr) {
+				vfree(rcv_desc->rx_buf_arr);
+				rcv_desc->rx_buf_arr = NULL;
+			}
+		}
+	}
+	if (adapter->cmd_buf_arr)
+		vfree(adapter->cmd_buf_arr);
+	return;
+}
+
+int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
+{
+	struct netxen_recv_context *recv_ctx;
+	struct netxen_rcv_desc_ctx *rcv_desc;
+	struct netxen_rx_buffer *rx_buf;
+	int ctx, ring, i, num_rx_bufs;
+
+	struct netxen_cmd_buffer *cmd_buf_arr;
+	struct net_device *netdev = adapter->netdev;
+
+	cmd_buf_arr = (struct netxen_cmd_buffer *)vmalloc(TX_RINGSIZE);
+	if (cmd_buf_arr == NULL) {
+		printk(KERN_ERR "%s: Failed to allocate cmd buffer ring\n",
+		       netdev->name);
+		return -ENOMEM;
+	}
+	memset(cmd_buf_arr, 0, TX_RINGSIZE);
+	adapter->cmd_buf_arr = cmd_buf_arr;
+
+	for (ctx = 0; ctx < MAX_RCV_CTX; ctx++) {
+		recv_ctx = &adapter->recv_ctx[ctx];
+		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
+			rcv_desc = &recv_ctx->rcv_desc[ring];
+			switch (RCV_DESC_TYPE(ring)) {
+			case RCV_DESC_NORMAL:
+				rcv_desc->max_rx_desc_count =
+					adapter->max_rx_desc_count;
+				rcv_desc->flags = RCV_DESC_NORMAL;
+				rcv_desc->dma_size = RX_DMA_MAP_LEN;
+				rcv_desc->skb_size = MAX_RX_BUFFER_LENGTH;
+				break;
+
+			case RCV_DESC_JUMBO:
+				rcv_desc->max_rx_desc_count =
+					adapter->max_jumbo_rx_desc_count;
+				rcv_desc->flags = RCV_DESC_JUMBO;
+				rcv_desc->dma_size = RX_JUMBO_DMA_MAP_LEN;
+				rcv_desc->skb_size =
+					MAX_RX_JUMBO_BUFFER_LENGTH;
+				break;
+
+			case RCV_RING_LRO:
+				rcv_desc->max_rx_desc_count =
+					adapter->max_lro_rx_desc_count;
+				rcv_desc->flags = RCV_DESC_LRO;
+				rcv_desc->dma_size = RX_LRO_DMA_MAP_LEN;
+				rcv_desc->skb_size = MAX_RX_LRO_BUFFER_LENGTH;
+				break;
+
+			}
+			rcv_desc->rx_buf_arr = (struct netxen_rx_buffer *)
+				vmalloc(RCV_BUFFSIZE);
+			if (rcv_desc->rx_buf_arr == NULL) {
+				printk(KERN_ERR "%s: Failed to allocate "
+					"rx buffer ring %d\n",
+					netdev->name, ring);
+				/* free whatever was already allocated */
+				goto err_out;
+			}
+			memset(rcv_desc->rx_buf_arr, 0, RCV_BUFFSIZE);
 			rcv_desc->begin_alloc = 0;
-			rx_buf = rcv_desc->rx_buf_arr;
-			num_rx_bufs = rcv_desc->max_rx_desc_count;
 			/*
 			 * Now go through all of them, set reference handles
 			 * and put them in the queues.
 			 */
+			num_rx_bufs = rcv_desc->max_rx_desc_count;
+			rx_buf = rcv_desc->rx_buf_arr;
 			for (i = 0; i < num_rx_bufs; i++) {
 				rx_buf->ref_handle = i;
 				rx_buf->state = NETXEN_BUFFER_FREE;
-				DPRINTK(INFO, "Rx buf:ctx%d i(%d) rx_buf:"
-					"%p\n", ctxid, i, rx_buf);
 				rx_buf++;
 			}
 		}
 	}
+
+	return 0;
+
+err_out:
+	netxen_free_sw_resources(adapter);
+	return -ENOMEM;
 }
 
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
@@ -730,19 +861,18 @@ int netxen_flash_unlock(struct netxen_adapter *adapter)
 #define NETXEN_BOARDTYPE		0x4008
 #define NETXEN_BOARDNUM 		0x400c
 #define NETXEN_CHIPNUM			0x4010
-#define NETXEN_ROMBUS_RESET		0xFFFFFFFF
 
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 {
 	int addr, val;
-	int n, i;
-	int init_delay = 0;
+	int i, init_delay = 0;
 	struct crb_addr_pair *buf;
+	unsigned offset, n;
 	u32 off;
 
 	/* resetall */
 	netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
-				    NETXEN_ROMBUS_RESET);
+				    0xffffffff);
 
 	if (verbose) {
 		if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
@@ -759,108 +889,141 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 			printk("Could not read chip number\n");
 	}
 
-	if (netxen_rom_fast_read(adapter, 0, &n) == 0 && (n & 0x80000000)) {
-		n &= ~0x80000000;
-		if (n < 0x400) {
-			if (verbose)
-				printk("%s: %d CRB init values found"
-				       " in ROM.\n", netxen_nic_driver_name, n);
-		} else {
-			printk("%s:n=0x%x Error! NetXen card flash not"
-			       " initialized.\n", __FUNCTION__, n);
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
+			(n != 0xcafecafeUL) ||
+			netxen_rom_fast_read(adapter, 4, &n) != 0) {
+			printk(KERN_ERR "%s: ERROR Reading crb_init area: "
+					"n: %08x\n", netxen_nic_driver_name, n);
 			return -EIO;
 		}
-		buf = kcalloc(n, sizeof(struct crb_addr_pair), GFP_KERNEL);
-		if (buf == NULL) {
-			printk("%s: netxen_pinit_from_rom: Unable to calloc "
-			       "memory.\n", netxen_nic_driver_name);
-			return -ENOMEM;
-		}
-		for (i = 0; i < n; i++) {
-			if (netxen_rom_fast_read(adapter, 8 * i + 4, &val) != 0
-			    || netxen_rom_fast_read(adapter, 8 * i + 8,
-						    &addr) != 0)
-				return -EIO;
-
-			buf[i].addr = addr;
-			buf[i].data = val;
-
-			if (verbose)
-				printk("%s: PCI:     0x%08x == 0x%08x\n",
-				       netxen_nic_driver_name, (unsigned int)
-				       netxen_decode_crb_addr(addr), val);
+		offset = n & 0xffffU;
+		n = (n >> 16) & 0xffffU;
+	} else {
+		if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
+			!(n & 0x80000000)) {
+			printk(KERN_ERR "%s: ERROR Reading crb_init area: "
+					"n: %08x\n", netxen_nic_driver_name, n);
+			return -EIO;
 		}
-		for (i = 0; i < n; i++) {
+		offset = 1;
+		n &= ~0x80000000;
+	}
+
+	if (n < 1024) {
+		if (verbose)
+			printk(KERN_DEBUG "%s: %d CRB init values found"
+			       " in ROM.\n", netxen_nic_driver_name, n);
+	} else {
+		printk(KERN_ERR "%s:n=0x%x Error! NetXen card flash not"
+		       " initialized.\n", __func__, n);
+		return -EIO;
+	}
+
+	buf = kcalloc(n, sizeof(struct crb_addr_pair), GFP_KERNEL);
+	if (buf == NULL) {
+		printk("%s: netxen_pinit_from_rom: Unable to calloc memory.\n",
+				netxen_nic_driver_name);
+		return -ENOMEM;
+	}
+	for (i = 0; i < n; i++) {
+		if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
+		netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0)
+			return -EIO;
+
+		buf[i].addr = addr;
+		buf[i].data = val;
 
-			off = netxen_decode_crb_addr(buf[i].addr);
-			if (off == NETXEN_ADDR_ERROR) {
-				printk(KERN_ERR"CRB init value out of range %x\n",
+		if (verbose)
+			printk(KERN_DEBUG "%s: PCI:     0x%08x == 0x%08x\n",
+				netxen_nic_driver_name,
+				(u32)netxen_decode_crb_addr(addr), val);
+	}
+	for (i = 0; i < n; i++) {
+
+		off = netxen_decode_crb_addr(buf[i].addr);
+		if (off == NETXEN_ADDR_ERROR) {
+			printk(KERN_ERR"CRB init value out of range %x\n",
 					buf[i].addr);
+			continue;
+		}
+		off += NETXEN_PCI_CRBSPACE;
+		/* skipping cold reboot MAGIC */
+		if (off == NETXEN_CAM_RAM(0x1fc))
+			continue;
+
+		if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+			/* do not reset PCI */
+			if (off == (ROMUSB_GLB + 0xbc))
 				continue;
-			}
-			off += NETXEN_PCI_CRBSPACE;
-			/* skipping cold reboot MAGIC */
-			if (off == NETXEN_CAM_RAM(0x1fc))
+			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
+				buf[i].data = 0x1020;
+			/* skip the function enable register */
+			if (off == NETXEN_PCIE_REG(PCIE_SETUP_FUNCTION))
 				continue;
+			if (off == NETXEN_PCIE_REG(PCIE_SETUP_FUNCTION2))
+				continue;
+			if ((off & 0x0ff00000) == NETXEN_CRB_SMB)
+				continue;
+		}
 
-			/* After writing this register, HW needs time for CRB */
-			/* to quiet down (else crb_window returns 0xffffffff) */
-			if (off == NETXEN_ROMUSB_GLB_SW_RESET) {
-				init_delay = 1;
+		if (off == NETXEN_ADDR_ERROR) {
+			printk(KERN_ERR "%s: Err: Unknown addr: 0x%08x\n",
+					netxen_nic_driver_name, buf[i].addr);
+			continue;
+		}
+
+		/* After writing this register, HW needs time for CRB */
+		/* to quiet down (else crb_window returns 0xffffffff) */
+		if (off == NETXEN_ROMUSB_GLB_SW_RESET) {
+			init_delay = 1;
+			if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
 				/* hold xdma in reset also */
 				buf[i].data = NETXEN_NIC_XDMA_RESET;
 			}
+		}
 
-			adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
+		adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
 
-			if (init_delay == 1) {
-				msleep(1000);
-				init_delay = 0;
-			}
-			msleep(1);
+		if (init_delay == 1) {
+			msleep(1000);
+			init_delay = 0;
 		}
-		kfree(buf);
+		msleep(1);
+	}
+	kfree(buf);
 
-		/* disable_peg_cache_all */
+	/* disable_peg_cache_all */
 
-		/* unreset_net_cache */
-		adapter->hw_read_wx(adapter, NETXEN_ROMUSB_GLB_SW_RESET, &val,
-				      4);
-		netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
-					    (val & 0xffffff0f));
-		/* p2dn replyCount */
+	/* unreset_net_cache */
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+		adapter->hw_read_wx(adapter,
+				NETXEN_ROMUSB_GLB_SW_RESET, &val, 4);
 		netxen_crb_writelit_adapter(adapter,
-					    NETXEN_CRB_PEG_NET_D + 0xec, 0x1e);
-		/* disable_peg_cache 0 */
-		netxen_crb_writelit_adapter(adapter,
-					    NETXEN_CRB_PEG_NET_D + 0x4c, 8);
-		/* disable_peg_cache 1 */
-		netxen_crb_writelit_adapter(adapter,
-					    NETXEN_CRB_PEG_NET_I + 0x4c, 8);
-
-		/* peg_clr_all */
-
-		/* peg_clr 0 */
-		netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0x8,
-					    0);
-		netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0xc,
-					    0);
-		/* peg_clr 1 */
-		netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0x8,
-					    0);
-		netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0xc,
-					    0);
-		/* peg_clr 2 */
-		netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0x8,
-					    0);
-		netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0xc,
-					    0);
-		/* peg_clr 3 */
-		netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0x8,
-					    0);
-		netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0xc,
-					    0);
+				NETXEN_ROMUSB_GLB_SW_RESET, (val & 0xffffff0f));
 	}
+
+	/* p2dn replyCount */
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_D + 0xec, 0x1e);
+	/* disable_peg_cache 0 */
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_D + 0x4c, 8);
+	/* disable_peg_cache 1 */
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_I + 0x4c, 8);
+
+	/* peg_clr_all */
+
+	/* peg_clr 0 */
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0x8, 0);
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_0 + 0xc, 0);
+	/* peg_clr 1 */
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0x8, 0);
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_1 + 0xc, 0);
+	/* peg_clr 2 */
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0x8, 0);
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_2 + 0xc, 0);
+	/* peg_clr 3 */
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0x8, 0);
+	netxen_crb_writelit_adapter(adapter, NETXEN_CRB_PEG_NET_3 + 0xc, 0);
 	return 0;
 }
 
@@ -876,7 +1039,7 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 				 &adapter->dummy_dma.phys_addr);
 	if (adapter->dummy_dma.addr == NULL) {
 		printk("%s: ERROR: Could not allocate dummy DMA memory\n",
-		       __FUNCTION__);
+		       __func__);
 		return -ENOMEM;
 	}
 
@@ -887,6 +1050,11 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 	adapter->pci_write_normalize(adapter, CRB_HOST_DUMMY_BUF_ADDR_HI, hi);
 	adapter->pci_write_normalize(adapter, CRB_HOST_DUMMY_BUF_ADDR_LO, lo);
 
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		uint32_t temp = 0;
+		adapter->hw_write_wx(adapter, CRB_HOST_DUMMY_BUF, &temp, 4);
+	}
+
 	return 0;
 }
 
@@ -920,22 +1088,24 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter)
 int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 {
 	u32 val = 0;
-	int retries = 30;
+	int retries = 60;
 
 	if (!pegtune_val) {
 		do {
 			val = adapter->pci_read_normalize(adapter,
 					CRB_CMDPEG_STATE);
-			pegtune_val = adapter->pci_read_normalize(adapter,
-					NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
 
 			if (val == PHAN_INITIALIZE_COMPLETE ||
 				val == PHAN_INITIALIZE_ACK)
 				return 0;
 
-			msleep(1000);
+			msleep(500);
+
 		} while (--retries);
+
 		if (!retries) {
+			pegtune_val = adapter->pci_read_normalize(adapter,
+					NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
 			printk(KERN_WARNING "netxen_phantom_init: init failed, "
 					"pegtune_val=%x\n", pegtune_val);
 			return -1;
@@ -945,6 +1115,30 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val)
 	return 0;
 }
 
+int netxen_receive_peg_ready(struct netxen_adapter *adapter)
+{
+	u32 val = 0;
+	int retries = 2000;
+
+	do {
+		val = adapter->pci_read_normalize(adapter, CRB_RCVPEG_STATE);
+
+		if (val == PHAN_PEG_RCV_INITIALIZED)
+			return 0;
+
+		msleep(10);
+
+	} while (--retries);
+
+	if (!retries) {
+		printk(KERN_ERR "Receive Peg initialization not "
+			      "complete, state: 0x%x.\n", val);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static int netxen_nic_check_temp(struct netxen_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 72d9f48b80d..4d32f3cc2fb 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -49,13 +49,22 @@ char netxen_nic_driver_name[] = "netxen_nic";
 static char netxen_nic_driver_string[] = "NetXen Network Driver version "
     NETXEN_NIC_LINUX_VERSIONID;
 
+static int port_mode = NETXEN_PORT_MODE_AUTO_NEG;
+
+/* Default to restricted 1G auto-neg mode */
+static int wol_port_mode = 5;
+
+static int use_msi = 1;
+
+static int use_msi_x = 1;
+
 #define NETXEN_NETDEV_WEIGHT 120
 #define NETXEN_ADAPTER_UP_MAGIC 777
 #define NETXEN_NIC_PEG_TUNE 0
 
 /* Local functions to NetXen NIC driver */
 static int __devinit netxen_nic_probe(struct pci_dev *pdev,
-				      const struct pci_device_id *ent);
+		const struct pci_device_id *ent);
 static void __devexit netxen_nic_remove(struct pci_dev *pdev);
 static int netxen_nic_open(struct net_device *netdev);
 static int netxen_nic_close(struct net_device *netdev);
@@ -135,9 +144,11 @@ netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter,
 			adapter->crb_addr_cmd_consumer, crb_consumer);
 }
 
-static uint32_t msi_tgt_status[4] = {
+static uint32_t msi_tgt_status[8] = {
 	ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1,
-	ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3
+	ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3,
+	ISR_INT_TARGET_STATUS_F4, ISR_INT_TARGET_STATUS_F5,
+	ISR_INT_TARGET_STATUS_F6, ISR_INT_TARGET_STATUS_F7
 };
 
 static uint32_t sw_int_mask[4] = {
@@ -145,6 +156,8 @@ static uint32_t sw_int_mask[4] = {
 	CRB_SW_INT_MASK_2, CRB_SW_INT_MASK_3
 };
 
+static struct netxen_legacy_intr_set legacy_intr[] = NX_LEGACY_INTR_CONFIG;
+
 static void netxen_nic_disable_int(struct netxen_adapter *adapter)
 {
 	u32 mask = 0x7ff;
@@ -159,7 +172,7 @@ static void netxen_nic_disable_int(struct netxen_adapter *adapter)
 	    adapter->intr_scheme != INTR_SCHEME_PERPORT)
 		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
 
-	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
 		do {
 			adapter->pci_write_immediate(adapter,
 					ISR_INT_TARGET_STATUS, 0xffffffff);
@@ -208,7 +221,7 @@ static void netxen_nic_enable_int(struct netxen_adapter *adapter)
 
 	adapter->pci_write_normalize(adapter, sw_int_mask[port], 0x1);
 
-	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
 		mask = 0xbff;
 		if (adapter->intr_scheme != -1 &&
 			adapter->intr_scheme != INTR_SCHEME_PERPORT) {
@@ -222,6 +235,280 @@ static void netxen_nic_enable_int(struct netxen_adapter *adapter)
 	DPRINTK(1, INFO, "Done with enable Int\n");
 }
 
+static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int err;
+	uint64_t mask;
+
+#ifdef CONFIG_IA64
+	adapter->dma_mask = DMA_32BIT_MASK;
+#else
+	if (revision_id >= NX_P3_B0) {
+		/* should go to DMA_64BIT_MASK */
+		adapter->dma_mask = DMA_39BIT_MASK;
+		mask = DMA_39BIT_MASK;
+	} else if (revision_id == NX_P3_A2) {
+		adapter->dma_mask = DMA_39BIT_MASK;
+		mask = DMA_39BIT_MASK;
+	} else if (revision_id == NX_P2_C1) {
+		adapter->dma_mask = DMA_35BIT_MASK;
+		mask = DMA_35BIT_MASK;
+	} else {
+		adapter->dma_mask = DMA_32BIT_MASK;
+		mask = DMA_32BIT_MASK;
+		goto set_32_bit_mask;
+	}
+
+	/*
+	 * Consistent DMA mask is set to 32 bit because it cannot be set to
+	 * 35 bits. For P3 also leave it at 32 bits for now. Only the rings
+	 * come off this pool.
+	 */
+	if (pci_set_dma_mask(pdev, mask) == 0 &&
+		pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) == 0) {
+		adapter->pci_using_dac = 1;
+		return 0;
+	}
+#endif /* CONFIG_IA64 */
+
+set_32_bit_mask:
+	err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	if (!err)
+		err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	if (err) {
+		DPRINTK(ERR, "No usable DMA configuration, aborting:%d\n", err);
+		return err;
+	}
+
+	adapter->pci_using_dac = 0;
+	return 0;
+}
+
+static void netxen_check_options(struct netxen_adapter *adapter)
+{
+	switch (adapter->ahw.boardcfg.board_type) {
+	case NETXEN_BRDTYPE_P3_HMEZ:
+	case NETXEN_BRDTYPE_P3_XG_LOM:
+	case NETXEN_BRDTYPE_P3_10G_CX4:
+	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
+	case NETXEN_BRDTYPE_P3_IMEZ:
+	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+	case NETXEN_BRDTYPE_P3_10G_XFP:
+	case NETXEN_BRDTYPE_P3_10000_BASE_T:
+		adapter->msix_supported = !!use_msi_x;
+		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+		break;
+
+	case NETXEN_BRDTYPE_P2_SB31_10G:
+	case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
+	case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
+	case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ:
+		adapter->msix_supported = 0;
+		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+		break;
+
+	case NETXEN_BRDTYPE_P3_REF_QG:
+	case NETXEN_BRDTYPE_P3_4_GB:
+	case NETXEN_BRDTYPE_P3_4_GB_MM:
+	case NETXEN_BRDTYPE_P2_SB35_4G:
+	case NETXEN_BRDTYPE_P2_SB31_2G:
+		adapter->msix_supported = 0;
+		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
+		break;
+
+	default:
+		adapter->msix_supported = 0;
+		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
+
+		printk(KERN_WARNING "Unknown board type(0x%x)\n",
+				adapter->ahw.boardcfg.board_type);
+		break;
+	}
+
+	adapter->max_tx_desc_count = MAX_CMD_DESCRIPTORS_HOST;
+	adapter->max_jumbo_rx_desc_count = MAX_JUMBO_RCV_DESCRIPTORS;
+	adapter->max_lro_rx_desc_count = MAX_LRO_RCV_DESCRIPTORS;
+
+	adapter->max_possible_rss_rings = 1;
+	return;
+}
+
+static int
+netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
+{
+	int ret = 0;
+
+	if (first_boot == 0x55555555) {
+		/* This is the first boot after power up */
+
+		/* PCI bus master workaround */
+		adapter->hw_read_wx(adapter,
+			NETXEN_PCIE_REG(0x4), &first_boot, 4);
+		if (!(first_boot & 0x4)) {
+			first_boot |= 0x4;
+			adapter->hw_write_wx(adapter,
+				NETXEN_PCIE_REG(0x4), &first_boot, 4);
+			adapter->hw_read_wx(adapter,
+				NETXEN_PCIE_REG(0x4), &first_boot, 4);
+		}
+
+		/* This is the first boot after power up */
+		adapter->hw_read_wx(adapter,
+			NETXEN_ROMUSB_GLB_SW_RESET, &first_boot, 4);
+		if (first_boot != 0x80000f) {
+			/* clear the register for future unloads/loads */
+			adapter->pci_write_normalize(adapter,
+					NETXEN_CAM_RAM(0x1fc), 0);
+			ret = -1;
+		}
+
+		if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+			/* Start P2 boot loader */
+			adapter->pci_write_normalize(adapter,
+				NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
+			adapter->pci_write_normalize(adapter,
+					NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
+		}
+	}
+	return ret;
+}
+
+static void netxen_set_port_mode(struct netxen_adapter *adapter)
+{
+	u32 val, data;
+
+	val = adapter->ahw.boardcfg.board_type;
+	if ((val == NETXEN_BRDTYPE_P3_HMEZ) ||
+		(val == NETXEN_BRDTYPE_P3_XG_LOM)) {
+		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
+			data = NETXEN_PORT_MODE_802_3_AP;
+			adapter->hw_write_wx(adapter,
+				NETXEN_PORT_MODE_ADDR, &data, 4);
+		} else if (port_mode == NETXEN_PORT_MODE_XG) {
+			data = NETXEN_PORT_MODE_XG;
+			adapter->hw_write_wx(adapter,
+				NETXEN_PORT_MODE_ADDR, &data, 4);
+		} else if (port_mode == NETXEN_PORT_MODE_AUTO_NEG_1G) {
+			data = NETXEN_PORT_MODE_AUTO_NEG_1G;
+			adapter->hw_write_wx(adapter,
+				NETXEN_PORT_MODE_ADDR, &data, 4);
+		} else if (port_mode == NETXEN_PORT_MODE_AUTO_NEG_XG) {
+			data = NETXEN_PORT_MODE_AUTO_NEG_XG;
+			adapter->hw_write_wx(adapter,
+				NETXEN_PORT_MODE_ADDR, &data, 4);
+		} else {
+			data = NETXEN_PORT_MODE_AUTO_NEG;
+			adapter->hw_write_wx(adapter,
+				NETXEN_PORT_MODE_ADDR, &data, 4);
+		}
+
+		if ((wol_port_mode != NETXEN_PORT_MODE_802_3_AP) &&
+			(wol_port_mode != NETXEN_PORT_MODE_XG) &&
+			(wol_port_mode != NETXEN_PORT_MODE_AUTO_NEG_1G) &&
+			(wol_port_mode != NETXEN_PORT_MODE_AUTO_NEG_XG)) {
+			wol_port_mode = NETXEN_PORT_MODE_AUTO_NEG;
+		}
+		adapter->hw_write_wx(adapter, NETXEN_WOL_PORT_MODE,
+			&wol_port_mode, 4);
+	}
+}
+
+#define PCI_CAP_ID_GEN  0x10
+
+static void netxen_pcie_strap_init(struct netxen_adapter *adapter)
+{
+	u32 pdevfuncsave;
+	u32 c8c9value = 0;
+	u32 chicken = 0;
+	u32 control = 0;
+	int i, pos;
+	struct pci_dev *pdev;
+
+	pdev = pci_get_device(0x1166, 0x0140, NULL);
+	if (pdev) {
+		pci_dev_put(pdev);
+		adapter->hw_read_wx(adapter,
+			NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
+		chicken |= 0x4000;
+		adapter->hw_write_wx(adapter,
+			NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
+	}
+
+	pdev = adapter->pdev;
+
+	adapter->hw_read_wx(adapter,
+		NETXEN_PCIE_REG(PCIE_CHICKEN3), &chicken, 4);
+	/* clear chicken3.25:24 */
+	chicken &= 0xFCFFFFFF;
+	/*
+	 * if gen1 and B0, set F1020 - if gen 2, do nothing
+	 * if gen2 set to F1000
+	 */
+	pos = pci_find_capability(pdev, PCI_CAP_ID_GEN);
+	if (pos == 0xC0) {
+		pci_read_config_dword(pdev, pos + 0x10, &control);
+		if ((control & 0x000F0000) != 0x00020000) {
+			/*  set chicken3.24 if gen1 */
+			chicken |= 0x01000000;
+		}
+		printk(KERN_INFO "%s Gen2 strapping detected\n",
+				netxen_nic_driver_name);
+		c8c9value = 0xF1000;
+	} else {
+		/* set chicken3.24 if gen1 */
+		chicken |= 0x01000000;
+		printk(KERN_INFO "%s Gen1 strapping detected\n",
+				netxen_nic_driver_name);
+		if (adapter->ahw.revision_id == NX_P3_B0)
+			c8c9value = 0xF1020;
+		else
+			c8c9value = 0;
+
+	}
+	adapter->hw_write_wx(adapter,
+		NETXEN_PCIE_REG(PCIE_CHICKEN3), &chicken, 4);
+
+	if (!c8c9value)
+		return;
+
+	pdevfuncsave = pdev->devfn;
+	if (pdevfuncsave & 0x07)
+		return;
+
+	for (i = 0; i < 8; i++) {
+		pci_read_config_dword(pdev, pos + 8, &control);
+		pci_read_config_dword(pdev, pos + 8, &control);
+		pci_write_config_dword(pdev, pos + 8, c8c9value);
+		pdev->devfn++;
+	}
+	pdev->devfn = pdevfuncsave;
+}
+
+static void netxen_set_msix_bit(struct pci_dev *pdev, int enable)
+{
+	u32 control;
+	int pos;
+
+	pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+	if (pos) {
+		pci_read_config_dword(pdev, pos, &control);
+		if (enable)
+			control |= PCI_MSIX_FLAGS_ENABLE;
+		else
+			control = 0;
+		pci_write_config_dword(pdev, pos, control);
+	}
+}
+
+static void netxen_init_msix_entries(struct netxen_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < MSIX_ENTRIES_PER_ADAPTER; i++)
+		adapter->msix_entries[i].entry = i;
+}
+
 /*
  * netxen_nic_probe()
  *
@@ -247,28 +534,28 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 
 	u8 __iomem *db_ptr = NULL;
-	unsigned long mem_base, mem_len, db_base, db_len, pci_len0;
-	int pci_using_dac, i = 0, err;
-	int ring;
-	struct netxen_recv_context *recv_ctx = NULL;
-	struct netxen_rcv_desc_ctx *rcv_desc = NULL;
-	struct netxen_cmd_buffer *cmd_buf_arr = NULL;
+	unsigned long mem_base, mem_len, db_base, db_len, pci_len0 = 0;
+	int i = 0, err;
+	int first_driver, first_boot;
 	__le64 mac_addr[FLASH_NUM_PORTS + 1];
-	int valid_mac = 0;
 	u32 val;
 	int pci_func_id = PCI_FUNC(pdev->devfn);
 	DECLARE_MAC_BUF(mac);
+	struct netxen_legacy_intr_set *legacy_intrp;
+	uint8_t revision_id;
 
 	if (pci_func_id == 0)
-		printk(KERN_INFO "%s \n", netxen_nic_driver_string);
+		printk(KERN_INFO "%s\n", netxen_nic_driver_string);
 
 	if (pdev->class != 0x020000) {
 		printk(KERN_DEBUG "NetXen function %d, class %x will not "
 				"be enabled.\n",pci_func_id, pdev->class);
 		return -ENODEV;
 	}
+
 	if ((err = pci_enable_device(pdev)))
 		return err;
+
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
 		err = -ENODEV;
 		goto err_out_disable_pdev;
@@ -278,18 +565,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_disable_pdev;
 
 	pci_set_master(pdev);
-	if (pdev->revision == NX_P2_C1 &&
-	    (pci_set_dma_mask(pdev, DMA_35BIT_MASK) == 0) &&
-	    (pci_set_consistent_dma_mask(pdev, DMA_35BIT_MASK) == 0)) {
-		pci_using_dac = 1;
-	} else {
-		if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) ||
-		    (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)))
-			goto err_out_free_res;
-
-		pci_using_dac = 0;
-	}
-
 
 	netdev = alloc_etherdev(sizeof(struct netxen_adapter));
 	if(!netdev) {
@@ -302,8 +577,17 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	SET_NETDEV_DEV(netdev, &pdev->dev);
 
 	adapter = netdev->priv;
-
+	adapter->netdev  = netdev;
+	adapter->pdev    = pdev;
 	adapter->ahw.pci_func  = pci_func_id;
+
+	revision_id = pdev->revision;
+	adapter->ahw.revision_id = revision_id;
+
+	err = nx_set_dma_mask(adapter, revision_id);
+	if (err)
+		goto err_out_free_netdev;
+
 	rwlock_init(&adapter->adapter_lock);
 	adapter->ahw.qdr_sn_window = -1;
 	adapter->ahw.ddr_mn_window = -1;
@@ -379,7 +663,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if (db_len == 0) {
 		printk(KERN_ERR "%s: doorbell is disabled\n",
-		       netxen_nic_driver_name);
+				netxen_nic_driver_name);
 		err = -EIO;
 		goto err_out_iounmap;
 	}
@@ -389,7 +673,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	db_ptr = ioremap(db_base, NETXEN_DB_MAPSIZE_BYTES);
 	if (!db_ptr) {
 		printk(KERN_ERR "%s: Failed to allocate doorbell map.",
-		       netxen_nic_driver_name);
+				netxen_nic_driver_name);
 		err = -EIO;
 		goto err_out_iounmap;
 	}
@@ -404,11 +688,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->ahw.db_base = db_ptr;
 	adapter->ahw.db_len = db_len;
 
-	adapter->netdev  = netdev;
-	adapter->pdev    = pdev;
-
 	netif_napi_add(netdev, &adapter->napi,
-		       netxen_nic_poll, NETXEN_NETDEV_WEIGHT);
+			netxen_nic_poll, NETXEN_NETDEV_WEIGHT);
+
+	if (revision_id >= NX_P3_B0)
+		legacy_intrp = &legacy_intr[pci_func_id];
+	else
+		legacy_intrp = &legacy_intr[0];
+
+	adapter->legacy_intr.int_vec_bit = legacy_intrp->int_vec_bit;
+	adapter->legacy_intr.tgt_status_reg = legacy_intrp->tgt_status_reg;
+	adapter->legacy_intr.tgt_mask_reg = legacy_intrp->tgt_mask_reg;
+	adapter->legacy_intr.pci_int_reg = legacy_intrp->pci_int_reg;
 
 	/* this will be read from FW later */
 	adapter->intr_scheme = -1;
@@ -418,8 +709,11 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->portnum = pci_func_id;
 	adapter->status   &= ~NETXEN_NETDEV_STATUS;
 	adapter->rx_csum = 1;
-	adapter->max_mc_count = 16;
 	adapter->mc_enabled = 0;
+	if (NX_IS_REVISION_P3(revision_id))
+		adapter->max_mc_count = 38;
+	else
+		adapter->max_mc_count = 16;
 
 	netdev->open		   = netxen_nic_open;
 	netdev->stop		   = netxen_nic_close;
@@ -441,18 +735,12 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->features = NETIF_F_SG;
 	netdev->features |= NETIF_F_IP_CSUM;
 	netdev->features |= NETIF_F_TSO;
+	if (NX_IS_REVISION_P3(revision_id))
+		netdev->features |= NETIF_F_TSO6;
 
-	if (pci_using_dac)
+	if (adapter->pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	if (pci_enable_msi(pdev))
-		adapter->flags &= ~NETXEN_NIC_MSI_ENABLED;
-	else
-		adapter->flags |= NETXEN_NIC_MSI_ENABLED;
-
-	netdev->irq = pdev->irq;
-	INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
-
 	/*
 	 * Set the CRB window to invalid. If any register in window 0 is
 	 * accessed it should set the window to 0 and then reset it to 1.
@@ -461,87 +749,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if (netxen_nic_get_board_info(adapter) != 0) {
 		printk("%s: Error getting board config info.\n",
-		       netxen_nic_driver_name);
+				netxen_nic_driver_name);
 		err = -EIO;
 		goto err_out_iounmap;
 	}
 
-	/*
-	 *  Adapter in our case is quad port so initialize it before
-	 *  initializing the ports
-	 */
-
 	netxen_initialize_adapter_ops(adapter);
 
-	adapter->max_tx_desc_count = MAX_CMD_DESCRIPTORS_HOST;
-	if ((adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB35_4G) ||
-			(adapter->ahw.boardcfg.board_type ==
-			 NETXEN_BRDTYPE_P2_SB31_2G))
-		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
-	else
-		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS;
-	adapter->max_jumbo_rx_desc_count = MAX_JUMBO_RCV_DESCRIPTORS;
-	adapter->max_lro_rx_desc_count = MAX_LRO_RCV_DESCRIPTORS;
-
-	cmd_buf_arr = (struct netxen_cmd_buffer *)vmalloc(TX_RINGSIZE);
-	if (cmd_buf_arr == NULL) {
-		printk(KERN_ERR
-		       "%s: Could not allocate cmd_buf_arr memory:%d\n",
-		       netxen_nic_driver_name, (int)TX_RINGSIZE);
-		err = -ENOMEM;
-		goto err_out_free_adapter;
-	}
-	memset(cmd_buf_arr, 0, TX_RINGSIZE);
-	adapter->cmd_buf_arr = cmd_buf_arr;
-
-	for (i = 0; i < MAX_RCV_CTX; ++i) {
-		recv_ctx = &adapter->recv_ctx[i];
-		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			rcv_desc = &recv_ctx->rcv_desc[ring];
-			switch (RCV_DESC_TYPE(ring)) {
-			case RCV_DESC_NORMAL:
-				rcv_desc->max_rx_desc_count =
-				    adapter->max_rx_desc_count;
-				rcv_desc->flags = RCV_DESC_NORMAL;
-				rcv_desc->dma_size = RX_DMA_MAP_LEN;
-				rcv_desc->skb_size = MAX_RX_BUFFER_LENGTH;
-				break;
-
-			case RCV_DESC_JUMBO:
-				rcv_desc->max_rx_desc_count =
-				    adapter->max_jumbo_rx_desc_count;
-				rcv_desc->flags = RCV_DESC_JUMBO;
-				rcv_desc->dma_size = RX_JUMBO_DMA_MAP_LEN;
-				rcv_desc->skb_size = MAX_RX_JUMBO_BUFFER_LENGTH;
-				break;
-
-			case RCV_RING_LRO:
-				rcv_desc->max_rx_desc_count =
-				    adapter->max_lro_rx_desc_count;
-				rcv_desc->flags = RCV_DESC_LRO;
-				rcv_desc->dma_size = RX_LRO_DMA_MAP_LEN;
-				rcv_desc->skb_size = MAX_RX_LRO_BUFFER_LENGTH;
-				break;
-
-			}
-			rcv_desc->rx_buf_arr = (struct netxen_rx_buffer *)
-			    vmalloc(RCV_BUFFSIZE);
-
-			if (rcv_desc->rx_buf_arr == NULL) {
-				printk(KERN_ERR "%s: Could not allocate "
-				       "rcv_desc->rx_buf_arr memory:%d\n",
-				       netxen_nic_driver_name,
-				       (int)RCV_BUFFSIZE);
-				err = -ENOMEM;
-				goto err_out_free_rx_buffer;
-			}
-			memset(rcv_desc->rx_buf_arr, 0, RCV_BUFFSIZE);
-		}
-
-	}
-
-	netxen_initialize_adapter_sw(adapter);	/* initialize the buffers in adapter */
-
 	/* Mezz cards have PCI function 0,2,3 enabled */
 	switch (adapter->ahw.boardcfg.board_type) {
 	case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ:
@@ -553,81 +767,51 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	init_timer(&adapter->watchdog_timer);
-	adapter->ahw.xg_linkup = 0;
-	adapter->watchdog_timer.function = &netxen_watchdog;
-	adapter->watchdog_timer.data = (unsigned long)adapter;
-	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
-	adapter->ahw.revision_id = pdev->revision;
+	/*
+	 * This call will setup various max rx/tx counts.
+	 * It must be done before any buffer/ring allocations.
+	 */
+	netxen_check_options(adapter);
 
+	first_driver = 0;
+	if (NX_IS_REVISION_P3(revision_id)) {
+		if (adapter->ahw.pci_func == 0)
+			first_driver = 1;
+	} else {
+		if (adapter->portnum == 0)
+			first_driver = 1;
+	}
 	adapter->crb_addr_cmd_producer = crb_cmd_producer[adapter->portnum];
 	adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum];
 	netxen_nic_update_cmd_producer(adapter, 0);
 	netxen_nic_update_cmd_consumer(adapter, 0);
 
-	if (netxen_is_flash_supported(adapter) == 0 &&
-	    netxen_get_flash_mac_addr(adapter, mac_addr) == 0)
-		valid_mac = 1;
-	else
-		valid_mac = 0;
-
-	if (valid_mac) {
-		unsigned char *p = (unsigned char *)&mac_addr[adapter->portnum];
-		netdev->dev_addr[0] = *(p + 5);
-		netdev->dev_addr[1] = *(p + 4);
-		netdev->dev_addr[2] = *(p + 3);
-		netdev->dev_addr[3] = *(p + 2);
-		netdev->dev_addr[4] = *(p + 1);
-		netdev->dev_addr[5] = *(p + 0);
+	if (first_driver) {
+		first_boot = adapter->pci_read_normalize(adapter,
+				NETXEN_CAM_RAM(0x1fc));
 
-		memcpy(netdev->perm_addr, netdev->dev_addr,
-			netdev->addr_len);
-		if (!is_valid_ether_addr(netdev->perm_addr)) {
-			printk(KERN_ERR "%s: Bad MAC address %s.\n",
-			       netxen_nic_driver_name,
-			       print_mac(mac, netdev->dev_addr));
-		} else {
-			if (adapter->macaddr_set)
-				adapter->macaddr_set(adapter,
-							netdev->dev_addr);
+		err = netxen_check_hw_init(adapter, first_boot);
+		if (err) {
+			printk(KERN_ERR "%s: error in init HW init sequence\n",
+					netxen_nic_driver_name);
+			goto err_out_iounmap;
 		}
-	}
 
-	if (adapter->portnum == 0) {
-		err = netxen_initialize_adapter_offload(adapter);
-		if (err)
-			goto err_out_free_rx_buffer;
-		val = adapter->pci_read_normalize(adapter,
-				NETXEN_CAM_RAM(0x1fc));
-		if (val == 0x55555555) {
-		    /* This is the first boot after power up */
-		    netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(0x4), &val);
-			if (!(val & 0x4)) {
-				val |= 0x4;
-				netxen_nic_write_w0(adapter, NETXEN_PCIE_REG(0x4), val);
-				netxen_nic_read_w0(adapter, NETXEN_PCIE_REG(0x4), &val);
-				if (!(val & 0x4))
-					printk(KERN_ERR "%s: failed to set MSI bit in PCI-e reg\n",
-							netxen_nic_driver_name);
-			}
-		    val = adapter->pci_read_normalize(adapter,
-					NETXEN_ROMUSB_GLB_SW_RESET);
-		    printk(KERN_INFO"NetXen: read 0x%08x for reset reg.\n",val);
-		    if (val != 0x80000f) {
-			/* clear the register for future unloads/loads */
-				adapter->pci_write_normalize(adapter,
-						NETXEN_CAM_RAM(0x1fc), 0);
-				printk(KERN_ERR "ERROR in NetXen HW init sequence.\n");
-				err = -ENODEV;
-				goto err_out_free_dev;
-		    }
-		} else {
+		if (NX_IS_REVISION_P3(revision_id))
+			netxen_set_port_mode(adapter);
+
+		if (first_boot != 0x55555555) {
 			adapter->pci_write_normalize(adapter,
 						CRB_CMDPEG_STATE, 0);
 			netxen_pinit_from_rom(adapter, 0);
 			msleep(1);
 			netxen_load_firmware(adapter);
-			netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+		}
+
+		if (NX_IS_REVISION_P3(revision_id))
+			netxen_pcie_strap_init(adapter);
+
+		if (NX_IS_REVISION_P2(revision_id)) {
 
 			/* Initialize multicast addr pool owners */
 			val = 0x7654;
@@ -638,10 +822,16 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		}
 
-		/* clear the register for future unloads/loads */
-		adapter->pci_write_normalize(adapter, NETXEN_CAM_RAM(0x1fc), 0);
-		dev_info(&pdev->dev, "cmdpeg state: 0x%0x\n",
-			adapter->pci_read_normalize(adapter, CRB_CMDPEG_STATE));
+		if ((first_boot == 0x55555555) &&
+			(NX_IS_REVISION_P2(revision_id))) {
+			/* Unlock the HW, prompting the boot sequence */
+			adapter->pci_write_normalize(adapter,
+					NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
+		}
+
+		err = netxen_initialize_adapter_offload(adapter);
+		if (err)
+			goto err_out_iounmap;
 
 		/*
 		 * Tell the hardware our version number.
@@ -651,12 +841,19 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			| (_NETXEN_NIC_LINUX_SUBVERSION);
 		adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, i);
 
-		/* Unlock the HW, prompting the boot sequence */
-		adapter->pci_write_normalize(adapter,
-				NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
 		/* Handshake with the card before we register the devices. */
 		netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
-	}
+
+		if (NX_IS_REVISION_P3(revision_id)) {
+			adapter->hw_read_wx(adapter,
+					NETXEN_MIU_MN_CONTROL, &val, 4);
+			adapter->ahw.cut_through = (val & 0x4) ? 1 : 0;
+			dev_info(&pdev->dev, "firmware running in %s mode\n",
+			adapter->ahw.cut_through ? "cut through" : "legacy");
+		}
+	}	/* first_driver */
+
+	netxen_nic_flash_print(adapter);
 
 	/*
 	 * See if the firmware gave us a virtual-physical port mapping.
@@ -666,6 +863,76 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (i != 0x55555555)
 		adapter->physical_port = i;
 
+	adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);
+
+	netxen_set_msix_bit(pdev, 0);
+
+	if (NX_IS_REVISION_P3(revision_id)) {
+		if ((mem_len != NETXEN_PCI_128MB_SIZE) &&
+			mem_len != NETXEN_PCI_2MB_SIZE)
+			adapter->msix_supported = 0;
+	}
+
+	if (adapter->msix_supported) {
+
+		netxen_init_msix_entries(adapter);
+
+		if (pci_enable_msix(pdev, adapter->msix_entries,
+					MSIX_ENTRIES_PER_ADAPTER))
+			goto request_msi;
+
+		adapter->flags |= NETXEN_NIC_MSIX_ENABLED;
+		netxen_set_msix_bit(pdev, 1);
+		dev_info(&pdev->dev, "using msi-x interrupts\n");
+
+	} else {
+request_msi:
+		if (use_msi && !pci_enable_msi(pdev)) {
+			adapter->flags |= NETXEN_NIC_MSI_ENABLED;
+			dev_info(&pdev->dev, "using msi interrupts\n");
+		} else
+			dev_info(&pdev->dev, "using legacy interrupts\n");
+	}
+
+	if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
+		netdev->irq = adapter->msix_entries[0].vector;
+	else
+		netdev->irq = pdev->irq;
+
+	err = netxen_receive_peg_ready(adapter);
+	if (err)
+		goto err_out_disable_msi;
+
+	init_timer(&adapter->watchdog_timer);
+	adapter->ahw.xg_linkup = 0;
+	adapter->watchdog_timer.function = &netxen_watchdog;
+	adapter->watchdog_timer.data = (unsigned long)adapter;
+	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
+	INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
+
+	if (netxen_is_flash_supported(adapter) == 0 &&
+			netxen_get_flash_mac_addr(adapter, mac_addr) == 0) {
+		unsigned char *p;
+
+		p = (unsigned char *)&mac_addr[adapter->portnum];
+		netdev->dev_addr[0] = *(p + 5);
+		netdev->dev_addr[1] = *(p + 4);
+		netdev->dev_addr[2] = *(p + 3);
+		netdev->dev_addr[3] = *(p + 2);
+		netdev->dev_addr[4] = *(p + 1);
+		netdev->dev_addr[5] = *(p + 0);
+
+		memcpy(netdev->perm_addr, netdev->dev_addr,
+			netdev->addr_len);
+		if (!is_valid_ether_addr(netdev->perm_addr)) {
+			printk(KERN_ERR "%s: Bad MAC address %s.\n",
+					netxen_nic_driver_name,
+					print_mac(mac, netdev->dev_addr));
+		} else {
+			adapter->macaddr_set(adapter, netdev->dev_addr);
+		}
+	}
+
 	netif_carrier_off(netdev);
 	netif_stop_queue(netdev);
 
@@ -674,41 +941,37 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			       " aborting\n", netxen_nic_driver_name,
 			       adapter->portnum);
 		err = -EIO;
-		goto err_out_free_dev;
+		goto err_out_disable_msi;
 	}
 
-	netxen_nic_flash_print(adapter);
 	pci_set_drvdata(pdev, adapter);
 
-	return 0;
-
-err_out_free_dev:
-	if (adapter->portnum == 0)
-		netxen_free_adapter_offload(adapter);
-
-err_out_free_rx_buffer:
-	for (i = 0; i < MAX_RCV_CTX; ++i) {
-		recv_ctx = &adapter->recv_ctx[i];
-		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			rcv_desc = &recv_ctx->rcv_desc[ring];
-			if (rcv_desc->rx_buf_arr != NULL) {
-				vfree(rcv_desc->rx_buf_arr);
-				rcv_desc->rx_buf_arr = NULL;
-			}
-		}
+	switch (adapter->ahw.board_type) {
+	case NETXEN_NIC_GBE:
+		dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
+				adapter->netdev->name);
+		break;
+	case NETXEN_NIC_XGBE:
+		dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n",
+				adapter->netdev->name);
+		break;
 	}
-	vfree(cmd_buf_arr);
 
-err_out_free_adapter:
+	return 0;
+
+err_out_disable_msi:
+	if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
+		pci_disable_msix(pdev);
 	if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
 		pci_disable_msi(pdev);
 
-	pci_set_drvdata(pdev, NULL);
+	if (first_driver)
+		netxen_free_adapter_offload(adapter);
 
+err_out_iounmap:
 	if (db_ptr)
 		iounmap(db_ptr);
 
-err_out_iounmap:
 	if (mem_ptr0)
 		iounmap(mem_ptr0);
 	if (mem_ptr1)
@@ -723,6 +986,7 @@ err_out_free_res:
 	pci_release_regions(pdev);
 
 err_out_disable_pdev:
+	pci_set_drvdata(pdev, NULL);
 	pci_disable_device(pdev);
 	return err;
 }
@@ -731,11 +995,6 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 {
 	struct netxen_adapter *adapter;
 	struct net_device *netdev;
-	struct netxen_rx_buffer *buffer;
-	struct netxen_recv_context *recv_ctx;
-	struct netxen_rcv_desc_ctx *rcv_desc;
-	int i, ctxid, ring;
-	static int init_firmware_done = 0;
 
 	adapter = pci_get_drvdata(pdev);
 	if (adapter == NULL)
@@ -746,36 +1005,18 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 	unregister_netdev(netdev);
 
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
-		init_firmware_done++;
 		netxen_free_hw_resources(adapter);
+		netxen_free_sw_resources(adapter);
 	}
 
-	for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) {
-		recv_ctx = &adapter->recv_ctx[ctxid];
-		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			rcv_desc = &recv_ctx->rcv_desc[ring];
-			for (i = 0; i < rcv_desc->max_rx_desc_count; ++i) {
-				buffer = &(rcv_desc->rx_buf_arr[i]);
-				if (buffer->state == NETXEN_BUFFER_FREE)
-					continue;
-				pci_unmap_single(pdev, buffer->dma,
-						 rcv_desc->dma_size,
-						 PCI_DMA_FROMDEVICE);
-				if (buffer->skb != NULL)
-					dev_kfree_skb_any(buffer->skb);
-			}
-			vfree(rcv_desc->rx_buf_arr);
-		}
-	}
-
-	vfree(adapter->cmd_buf_arr);
-
 	if (adapter->portnum == 0)
 		netxen_free_adapter_offload(adapter);
 
 	if (adapter->irq)
 		free_irq(adapter->irq, adapter);
 
+	if (adapter->flags & NETXEN_NIC_MSIX_ENABLED)
+		pci_disable_msix(pdev);
 	if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
 		pci_disable_msi(pdev);
 
@@ -813,52 +1054,67 @@ static int netxen_nic_open(struct net_device *netdev)
 			return -EIO;
 		}
 
-		/* setup all the resources for the Phantom... */
-		/* this include the descriptors for rcv, tx, and status */
-		netxen_nic_clear_stats(adapter);
-		err = netxen_nic_hw_resources(adapter);
+		err = netxen_alloc_sw_resources(adapter);
 		if (err) {
-			printk(KERN_ERR "Error in setting hw resources:%d\n",
-			       err);
+			printk(KERN_ERR "%s: Error in setting sw resources\n",
+					netdev->name);
 			return err;
 		}
+
+		netxen_nic_clear_stats(adapter);
+
+		err = netxen_alloc_hw_resources(adapter);
+		if (err) {
+			printk(KERN_ERR "%s: Error in setting hw resources\n",
+					netdev->name);
+			goto err_out_free_sw;
+		}
+
+		if (adapter->fw_major < 4) {
+			adapter->crb_addr_cmd_producer =
+				crb_cmd_producer[adapter->portnum];
+			adapter->crb_addr_cmd_consumer =
+				crb_cmd_consumer[adapter->portnum];
+		}
+
+		netxen_nic_update_cmd_producer(adapter, 0);
+		netxen_nic_update_cmd_consumer(adapter, 0);
+
 		for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
 			for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++)
 				netxen_post_rx_buffers(adapter, ctx, ring);
 		}
-		adapter->irq = adapter->pdev->irq;
-		if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
+		if (NETXEN_IS_MSI_FAMILY(adapter))
 			handler = netxen_msi_intr;
 		else {
 			flags |= IRQF_SHARED;
 			handler = netxen_intr;
 		}
+		adapter->irq = netdev->irq;
 		err = request_irq(adapter->irq, handler,
 				  flags, netdev->name, adapter);
 		if (err) {
 			printk(KERN_ERR "request_irq failed with: %d\n", err);
-			netxen_free_hw_resources(adapter);
-			return err;
+			goto err_out_free_hw;
 		}
 
 		adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
 	}
+
 	/* Done here again so that even if phantom sw overwrote it,
 	 * we set it */
-	if (adapter->init_port
-	    && adapter->init_port(adapter, adapter->portnum) != 0) {
+	err = adapter->init_port(adapter, adapter->portnum);
+	if (err) {
 		printk(KERN_ERR "%s: Failed to initialize port %d\n",
 				netxen_nic_driver_name, adapter->portnum);
-		return -EIO;
+		goto err_out_free_irq;
 	}
-	if (adapter->macaddr_set)
-		adapter->macaddr_set(adapter, netdev->dev_addr);
+	adapter->macaddr_set(adapter, netdev->dev_addr);
 
 	netxen_nic_set_link_parameters(adapter);
 
 	netxen_nic_set_multi(netdev);
-	if (adapter->set_mtu)
-		adapter->set_mtu(adapter, netdev->mtu);
+	adapter->set_mtu(adapter, netdev->mtu);
 
 	mod_timer(&adapter->watchdog_timer, jiffies);
 
@@ -868,6 +1124,14 @@ static int netxen_nic_open(struct net_device *netdev)
 	netif_start_queue(netdev);
 
 	return 0;
+
+err_out_free_irq:
+	free_irq(adapter->irq, adapter);
+err_out_free_hw:
+	netxen_free_hw_resources(adapter);
+err_out_free_sw:
+	netxen_free_sw_resources(adapter);
+	return err;
 }
 
 /*
@@ -876,9 +1140,6 @@ static int netxen_nic_open(struct net_device *netdev)
 static int netxen_nic_close(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
-	int i, j;
-	struct netxen_cmd_buffer *cmd_buff;
-	struct netxen_skb_frag *buffrag;
 
 	netif_carrier_off(netdev);
 	netif_stop_queue(netdev);
@@ -889,30 +1150,8 @@ static int netxen_nic_close(struct net_device *netdev)
 
 	netxen_nic_disable_int(adapter);
 
-	cmd_buff = adapter->cmd_buf_arr;
-	for (i = 0; i < adapter->max_tx_desc_count; i++) {
-		buffrag = cmd_buff->frag_array;
-		if (buffrag->dma) {
-			pci_unmap_single(adapter->pdev, buffrag->dma,
-					 buffrag->length, PCI_DMA_TODEVICE);
-			buffrag->dma = 0ULL;
-		}
-		for (j = 0; j < cmd_buff->frag_count; j++) {
-			buffrag++;
-			if (buffrag->dma) {
-				pci_unmap_page(adapter->pdev, buffrag->dma,
-					       buffrag->length,
-					       PCI_DMA_TODEVICE);
-				buffrag->dma = 0ULL;
-			}
-		}
-		/* Free the skb we received in netxen_nic_xmit_frame */
-		if (cmd_buff->skb) {
-			dev_kfree_skb_any(cmd_buff->skb);
-			cmd_buff->skb = NULL;
-		}
-		cmd_buff++;
-	}
+	netxen_release_tx_buffers(adapter);
+
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
 		FLUSH_SCHEDULED_WORK();
 		del_timer_sync(&adapter->watchdog_timer);
-- 
cgit v1.2.3


From a97342f9790f14ac20bd5f8b16ed661411fa2e3e Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:05 -0700
Subject: netxen: remove netxen_nic_isr.c

It had only couple of functions which are moved to main.c

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/Makefile          |   2 +-
 drivers/net/netxen/netxen_nic.h      |   6 +-
 drivers/net/netxen/netxen_nic_init.c |  56 ---------
 drivers/net/netxen/netxen_nic_isr.c  | 220 -----------------------------------
 drivers/net/netxen/netxen_nic_main.c | 121 ++++++++++++++++++-
 5 files changed, 122 insertions(+), 283 deletions(-)
 delete mode 100644 drivers/net/netxen/netxen_nic_isr.c

diff --git a/drivers/net/netxen/Makefile b/drivers/net/netxen/Makefile
index a07cdc6f738..c63a2079065 100644
--- a/drivers/net/netxen/Makefile
+++ b/drivers/net/netxen/Makefile
@@ -32,4 +32,4 @@
 obj-$(CONFIG_NETXEN_NIC) := netxen_nic.o
 
 netxen_nic-y := netxen_nic_hw.o netxen_nic_main.o netxen_nic_init.o \
-	netxen_nic_isr.o netxen_nic_ethtool.o netxen_nic_niu.o
+	netxen_nic_ethtool.o netxen_nic_niu.o
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index b23a5a447f0..87be0a6ef51 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -810,8 +810,7 @@ struct netxen_hardware_context {
 	u8 revision_id;
 	u16 board_type;
 	struct netxen_board_info boardcfg;
-	u32 xg_linkup;
-	u32 qg_linksup;
+	u32 linkup;
 	/* Address of cmd ring in Phantom */
 	struct cmd_desc_type0 *cmd_desc_head;
 	dma_addr_t cmd_desc_phys_addr;
@@ -965,7 +964,6 @@ struct netxen_adapter {
 	int msi_mode;
 	int (*enable_phy_interrupts) (struct netxen_adapter *);
 	int (*disable_phy_interrupts) (struct netxen_adapter *);
-	void (*handle_phy_intr) (struct netxen_adapter *);
 	int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t);
 	int (*set_mtu) (struct netxen_adapter *, int);
 	int (*set_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t);
@@ -1049,8 +1047,6 @@ int netxen_niu_xgbe_enable_phy_interrupts(struct netxen_adapter *adapter);
 int netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter);
 int netxen_niu_xgbe_disable_phy_interrupts(struct netxen_adapter *adapter);
 int netxen_niu_gbe_disable_phy_interrupts(struct netxen_adapter *adapter);
-void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter);
-void netxen_nic_gbe_handle_phy_intr(struct netxen_adapter *adapter);
 int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
 			    __u32 * readval);
 int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter,
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index c6e2bc71d8f..7c3fbc4a572 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -324,7 +324,6 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 		    netxen_niu_gbe_enable_phy_interrupts;
 		adapter->disable_phy_interrupts =
 		    netxen_niu_gbe_disable_phy_interrupts;
-		adapter->handle_phy_intr = netxen_nic_gbe_handle_phy_intr;
 		adapter->macaddr_set = netxen_niu_macaddr_set;
 		adapter->set_mtu = netxen_nic_set_mtu_gb;
 		adapter->set_promisc = netxen_niu_set_promiscuous_mode;
@@ -339,7 +338,6 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 		    netxen_niu_xgbe_enable_phy_interrupts;
 		adapter->disable_phy_interrupts =
 		    netxen_niu_xgbe_disable_phy_interrupts;
-		adapter->handle_phy_intr = netxen_nic_xgbe_handle_phy_intr;
 		adapter->macaddr_set = netxen_niu_xg_macaddr_set;
 		adapter->set_mtu = netxen_nic_set_mtu_xgb;
 		adapter->init_port = netxen_niu_xg_init_port;
@@ -1139,60 +1137,6 @@ int netxen_receive_peg_ready(struct netxen_adapter *adapter)
 	return 0;
 }
 
-static int netxen_nic_check_temp(struct netxen_adapter *adapter)
-{
-	struct net_device *netdev = adapter->netdev;
-	uint32_t temp, temp_state, temp_val;
-	int rv = 0;
-
-	temp = adapter->pci_read_normalize(adapter, CRB_TEMP_STATE);
-
-	temp_state = nx_get_temp_state(temp);
-	temp_val = nx_get_temp_val(temp);
-
-	if (temp_state == NX_TEMP_PANIC) {
-		printk(KERN_ALERT
-		       "%s: Device temperature %d degrees C exceeds"
-		       " maximum allowed. Hardware has been shut down.\n",
-		       netxen_nic_driver_name, temp_val);
-
-		netif_carrier_off(netdev);
-		netif_stop_queue(netdev);
-		rv = 1;
-	} else if (temp_state == NX_TEMP_WARN) {
-		if (adapter->temp == NX_TEMP_NORMAL) {
-			printk(KERN_ALERT
-			       "%s: Device temperature %d degrees C "
-			       "exceeds operating range."
-			       " Immediate action needed.\n",
-			       netxen_nic_driver_name, temp_val);
-		}
-	} else {
-		if (adapter->temp == NX_TEMP_WARN) {
-			printk(KERN_INFO
-			       "%s: Device temperature is now %d degrees C"
-			       " in normal range.\n", netxen_nic_driver_name,
-			       temp_val);
-		}
-	}
-	adapter->temp = temp_state;
-	return rv;
-}
-
-void netxen_watchdog_task(struct work_struct *work)
-{
-	struct netxen_adapter *adapter =
-		container_of(work, struct netxen_adapter, watchdog_task);
-
-	if ((adapter->portnum  == 0) && netxen_nic_check_temp(adapter))
-		return;
-
-	if (adapter->handle_phy_intr)
-		adapter->handle_phy_intr(adapter);
-
-	mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
-}
-
 /*
  * netxen_process_rcv() send the received packet to the protocol stack.
  * and if the number of receives exceeds RX_BUFFERS_REFILL, then we
diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c
deleted file mode 100644
index 104c287d77a..00000000000
--- a/drivers/net/netxen/netxen_nic_isr.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Copyright (C) 2003 - 2006 NetXen, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.
- *
- * Contact Information:
- *    info@netxen.com
- * NetXen,
- * 3965 Freedom Circle, Fourth floor,
- * Santa Clara, CA 95054
- */
-
-#include <linux/netdevice.h>
-#include <linux/delay.h>
-
-#include "netxen_nic.h"
-#include "netxen_nic_hw.h"
-#include "netxen_nic_phan_reg.h"
-
-/*
- * netxen_nic_get_stats - Get System Network Statistics
- * @netdev: network interface device structure
- */
-struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
-{
-	struct netxen_adapter *adapter = netdev_priv(netdev);
-	struct net_device_stats *stats = &adapter->net_stats;
-
-	memset(stats, 0, sizeof(*stats));
-
-	/* total packets received   */
-	stats->rx_packets = adapter->stats.no_rcv;
-	/* total packets transmitted    */
-	stats->tx_packets = adapter->stats.xmitedframes +
-		adapter->stats.xmitfinished;
-	/* total bytes received     */
-	stats->rx_bytes = adapter->stats.rxbytes;
-	/* total bytes transmitted  */
-	stats->tx_bytes = adapter->stats.txbytes;
-	/* bad packets received     */
-	stats->rx_errors = adapter->stats.rcvdbadskb;
-	/* packet transmit problems */
-	stats->tx_errors = adapter->stats.nocmddescriptor;
-	/* no space in linux buffers    */
-	stats->rx_dropped = adapter->stats.rxdropped;
-	/* no space available in linux  */
-	stats->tx_dropped = adapter->stats.txdropped;
-
-	return stats;
-}
-
-static void netxen_indicate_link_status(struct netxen_adapter *adapter,
-					u32 link)
-{
-	struct net_device *netdev = adapter->netdev;
-
-	if (link)
-		netif_carrier_on(netdev);
-	else
-		netif_carrier_off(netdev);
-}
-
-#if 0
-void netxen_handle_port_int(struct netxen_adapter *adapter, u32 enable)
-{
-	__u32 int_src;
-
-	/*  This should clear the interrupt source */
-	if (adapter->phy_read)
-		adapter->phy_read(adapter,
-				  NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS,
-				  &int_src);
-	if (int_src == 0) {
-		DPRINTK(INFO, "No phy interrupts for port #%d\n", portno);
-		return;
-	}
-	if (adapter->disable_phy_interrupts)
-		adapter->disable_phy_interrupts(adapter);
-
-	if (netxen_get_phy_int_jabber(int_src))
-		DPRINTK(INFO, "Jabber interrupt \n");
-
-	if (netxen_get_phy_int_polarity_changed(int_src))
-		DPRINTK(INFO, "POLARITY CHANGED int \n");
-
-	if (netxen_get_phy_int_energy_detect(int_src))
-		DPRINTK(INFO, "ENERGY DETECT INT \n");
-
-	if (netxen_get_phy_int_downshift(int_src))
-		DPRINTK(INFO, "DOWNSHIFT INT \n");
-	/* write it down later.. */
-	if ((netxen_get_phy_int_speed_changed(int_src))
-	    || (netxen_get_phy_int_link_status_changed(int_src))) {
-		__u32 status;
-
-		DPRINTK(INFO, "SPEED CHANGED OR LINK STATUS CHANGED \n");
-
-		if (adapter->phy_read
-		    && adapter->phy_read(adapter,
-					 NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-					 &status) == 0) {
-			if (netxen_get_phy_int_link_status_changed(int_src)) {
-				if (netxen_get_phy_link(status)) {
-					printk(KERN_INFO "%s: %s Link UP\n",
-					       netxen_nic_driver_name,
-					       adapter->netdev->name);
-
-				} else {
-					printk(KERN_INFO "%s: %s Link DOWN\n",
-					       netxen_nic_driver_name,
-					       adapter->netdev->name);
-				}
-				netxen_indicate_link_status(adapter,
-							    netxen_get_phy_link
-							    (status));
-			}
-		}
-	}
-	if (adapter->enable_phy_interrupts)
-		adapter->enable_phy_interrupts(adapter);
-}
-#endif  /*  0  */
-
-static void netxen_nic_isr_other(struct netxen_adapter *adapter)
-{
-	int portno = adapter->portnum;
-	u32 val, linkup, qg_linksup;
-
-	/* verify the offset */
-	val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
-	val = val >> adapter->physical_port;
-	if (val == adapter->ahw.qg_linksup)
-		return;
-
-	qg_linksup = adapter->ahw.qg_linksup;
-	adapter->ahw.qg_linksup = val;
-	DPRINTK(INFO, "link update 0x%08x\n", val);
-
-	linkup = val & 1;
-
-	if (linkup != (qg_linksup & 1)) {
-		printk(KERN_INFO "%s: %s PORT %d link %s\n",
-		       adapter->netdev->name,
-		       netxen_nic_driver_name, portno,
-		       ((linkup == 0) ? "down" : "up"));
-		netxen_indicate_link_status(adapter, linkup);
-		if (linkup)
-			netxen_nic_set_link_parameters(adapter);
-
-	}
-}
-
-void netxen_nic_gbe_handle_phy_intr(struct netxen_adapter *adapter)
-{
-	netxen_nic_isr_other(adapter);
-}
-
-#if 0
-int netxen_nic_link_ok(struct netxen_adapter *adapter)
-{
-	switch (adapter->ahw.board_type) {
-	case NETXEN_NIC_GBE:
-		return ((adapter->ahw.qg_linksup) & 1);
-
-	case NETXEN_NIC_XGBE:
-		return ((adapter->ahw.xg_linkup) & 1);
-
-	default:
-		printk(KERN_ERR"%s: Function: %s, Unknown board type\n",
-			netxen_nic_driver_name, __FUNCTION__);
-		break;
-	}
-
-	return 0;
-}
-#endif  /*  0  */
-
-void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter)
-{
-	struct net_device *netdev = adapter->netdev;
-	u32 val;
-
-	/* WINDOW = 1 */
-	val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
-	val >>= (adapter->physical_port * 8);
-	val &= 0xff;
-
-	if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) {
-		printk(KERN_INFO "%s: %s NIC Link is down\n",
-		       netxen_nic_driver_name, netdev->name);
-		adapter->ahw.xg_linkup = 0;
-		if (netif_running(netdev)) {
-			netif_carrier_off(netdev);
-			netif_stop_queue(netdev);
-		}
-	} else if (adapter->ahw.xg_linkup == 0 && val == XG_LINK_UP) {
-		printk(KERN_INFO "%s: %s NIC Link is up\n",
-		       netxen_nic_driver_name, netdev->name);
-		adapter->ahw.xg_linkup = 1;
-		netif_carrier_on(netdev);
-		netif_wake_queue(netdev);
-	}
-}
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 4d32f3cc2fb..2d0963f4d19 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -904,7 +904,7 @@ request_msi:
 		goto err_out_disable_msi;
 
 	init_timer(&adapter->watchdog_timer);
-	adapter->ahw.xg_linkup = 0;
+	adapter->ahw.linkup = 0;
 	adapter->watchdog_timer.function = &netxen_watchdog;
 	adapter->watchdog_timer.data = (unsigned long)adapter;
 	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
@@ -1335,6 +1335,80 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	return NETDEV_TX_OK;
 }
 
+static int netxen_nic_check_temp(struct netxen_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	uint32_t temp, temp_state, temp_val;
+	int rv = 0;
+
+	temp = adapter->pci_read_normalize(adapter, CRB_TEMP_STATE);
+
+	temp_state = nx_get_temp_state(temp);
+	temp_val = nx_get_temp_val(temp);
+
+	if (temp_state == NX_TEMP_PANIC) {
+		printk(KERN_ALERT
+		       "%s: Device temperature %d degrees C exceeds"
+		       " maximum allowed. Hardware has been shut down.\n",
+		       netxen_nic_driver_name, temp_val);
+
+		netif_carrier_off(netdev);
+		netif_stop_queue(netdev);
+		rv = 1;
+	} else if (temp_state == NX_TEMP_WARN) {
+		if (adapter->temp == NX_TEMP_NORMAL) {
+			printk(KERN_ALERT
+			       "%s: Device temperature %d degrees C "
+			       "exceeds operating range."
+			       " Immediate action needed.\n",
+			       netxen_nic_driver_name, temp_val);
+		}
+	} else {
+		if (adapter->temp == NX_TEMP_WARN) {
+			printk(KERN_INFO
+			       "%s: Device temperature is now %d degrees C"
+			       " in normal range.\n", netxen_nic_driver_name,
+			       temp_val);
+		}
+	}
+	adapter->temp = temp_state;
+	return rv;
+}
+
+static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	u32 val, port, linkup;
+
+	port = adapter->physical_port;
+
+	val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
+	if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+		linkup = (val >> port) & 1;
+	else {
+		val = (val >> port*8) & 0xff;
+		linkup = (val == XG_LINK_UP);
+	}
+
+	if (adapter->ahw.linkup && !linkup) {
+		printk(KERN_INFO "%s: %s NIC Link is down\n",
+		       netxen_nic_driver_name, netdev->name);
+		adapter->ahw.linkup = 0;
+		if (netif_running(netdev)) {
+			netif_carrier_off(netdev);
+			netif_stop_queue(netdev);
+		}
+	} else if (!adapter->ahw.linkup && linkup) {
+		printk(KERN_INFO "%s: %s NIC Link is up\n",
+		       netxen_nic_driver_name, netdev->name);
+		adapter->ahw.linkup = 1;
+		if (netif_running(netdev)) {
+			netif_carrier_on(netdev);
+			netif_wake_queue(netdev);
+		}
+	}
+}
+
 static void netxen_watchdog(unsigned long v)
 {
 	struct netxen_adapter *adapter = (struct netxen_adapter *)v;
@@ -1342,6 +1416,19 @@ static void netxen_watchdog(unsigned long v)
 	SCHEDULE_WORK(&adapter->watchdog_task);
 }
 
+void netxen_watchdog_task(struct work_struct *work)
+{
+	struct netxen_adapter *adapter =
+		container_of(work, struct netxen_adapter, watchdog_task);
+
+	if ((adapter->portnum  == 0) && netxen_nic_check_temp(adapter))
+		return;
+
+	netxen_nic_handle_phy_intr(adapter);
+
+	mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+}
+
 static void netxen_tx_timeout(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = (struct netxen_adapter *)
@@ -1367,6 +1454,38 @@ static void netxen_tx_timeout_task(struct work_struct *work)
 	netif_wake_queue(adapter->netdev);
 }
 
+/*
+ * netxen_nic_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ */
+struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
+{
+	struct netxen_adapter *adapter = netdev_priv(netdev);
+	struct net_device_stats *stats = &adapter->net_stats;
+
+	memset(stats, 0, sizeof(*stats));
+
+	/* total packets received   */
+	stats->rx_packets = adapter->stats.no_rcv;
+	/* total packets transmitted    */
+	stats->tx_packets = adapter->stats.xmitedframes +
+		adapter->stats.xmitfinished;
+	/* total bytes received     */
+	stats->rx_bytes = adapter->stats.rxbytes;
+	/* total bytes transmitted  */
+	stats->tx_bytes = adapter->stats.txbytes;
+	/* bad packets received     */
+	stats->rx_errors = adapter->stats.rcvdbadskb;
+	/* packet transmit problems */
+	stats->tx_errors = adapter->stats.nocmddescriptor;
+	/* no space in linux buffers    */
+	stats->rx_dropped = adapter->stats.rxdropped;
+	/* no space available in linux  */
+	stats->tx_dropped = adapter->stats.txdropped;
+
+	return stats;
+}
+
 static inline void
 netxen_handle_int(struct netxen_adapter *adapter)
 {
-- 
cgit v1.2.3


From 48bfd1e0fc66b27254ec742b014e689ef218e76c Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:06 -0700
Subject: netxen: add netxen_nic_ctx.c

Contains rx and tx ring context management and certain
firmware commands for netxen firmware v4.0.0+.

This patch gathers all HW context management code into
netxen_nic_ctx.c.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/Makefile              |   2 +-
 drivers/net/netxen/netxen_nic.h          | 272 ++++++++++++++++++++++++++++++-
 drivers/net/netxen/netxen_nic_ethtool.c  |   4 +-
 drivers/net/netxen/netxen_nic_hw.c       | 243 ---------------------------
 drivers/net/netxen/netxen_nic_init.c     | 154 ++++++++---------
 drivers/net/netxen/netxen_nic_main.c     |  21 +--
 drivers/net/netxen/netxen_nic_phan_reg.h |   2 -
 7 files changed, 359 insertions(+), 339 deletions(-)

diff --git a/drivers/net/netxen/Makefile b/drivers/net/netxen/Makefile
index c63a2079065..8e7c4c910d2 100644
--- a/drivers/net/netxen/Makefile
+++ b/drivers/net/netxen/Makefile
@@ -32,4 +32,4 @@
 obj-$(CONFIG_NETXEN_NIC) := netxen_nic.o
 
 netxen_nic-y := netxen_nic_hw.o netxen_nic_main.o netxen_nic_init.o \
-	netxen_nic_ethtool.o netxen_nic_niu.o
+	netxen_nic_ethtool.o netxen_nic_niu.o netxen_nic_ctx.o
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 87be0a6ef51..936219010e4 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -84,7 +84,7 @@
 #define TX_RINGSIZE	\
 	(sizeof(struct netxen_cmd_buffer) * adapter->max_tx_desc_count)
 #define RCV_BUFFSIZE	\
-	(sizeof(struct netxen_rx_buffer) * rcv_desc->max_rx_desc_count)
+	(sizeof(struct netxen_rx_buffer) * rds_ring->max_rx_desc_count)
 #define find_diff_among(a,b,range) ((a)<(b)?((b)-(a)):((b)+(range)-(a)))
 
 #define NETXEN_NETDEV_STATUS		0x1
@@ -303,7 +303,7 @@ struct netxen_ring_ctx {
 #define netxen_set_cmd_desc_port(cmd_desc, var)	\
 	((cmd_desc)->port_ctxid |= ((var) & 0x0F))
 #define netxen_set_cmd_desc_ctxid(cmd_desc, var)	\
-	((cmd_desc)->port_ctxid |= ((var) & 0xF0))
+	((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
 
 #define netxen_set_cmd_desc_flags(cmd_desc, val)	\
 	(cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
@@ -844,7 +844,7 @@ struct netxen_adapter_stats {
  * Rcv Descriptor Context. One such per Rcv Descriptor. There may
  * be one Rcv Descriptor for normal packets, one for jumbo and may be others.
  */
-struct netxen_rcv_desc_ctx {
+struct nx_host_rds_ring {
 	u32 flags;
 	u32 producer;
 	dma_addr_t phys_addr;
@@ -864,13 +864,270 @@ struct netxen_rcv_desc_ctx {
  * present elsewhere.
  */
 struct netxen_recv_context {
-	struct netxen_rcv_desc_ctx rcv_desc[NUM_RCV_DESC_RINGS];
+	u32 state;
+	u16 context_id;
+	u16 virt_port;
+
+	struct nx_host_rds_ring rds_rings[NUM_RCV_DESC_RINGS];
 	u32 status_rx_consumer;
 	u32 crb_sts_consumer;	/* reg offset */
 	dma_addr_t rcv_status_desc_phys_addr;
 	struct status_desc *rcv_status_desc_head;
 };
 
+/* New HW context creation */
+
+#define NX_OS_CRB_RETRY_COUNT	4000
+#define NX_CDRP_SIGNATURE_MAKE(pcifn, version) \
+	(((pcifn) & 0xff) | (((version) & 0xff) << 8) | (0xcafe << 16))
+
+#define NX_CDRP_CLEAR		0x00000000
+#define NX_CDRP_CMD_BIT		0x80000000
+
+/*
+ * All responses must have the NX_CDRP_CMD_BIT cleared
+ * in the crb NX_CDRP_CRB_OFFSET.
+ */
+#define NX_CDRP_FORM_RSP(rsp)	(rsp)
+#define NX_CDRP_IS_RSP(rsp)	(((rsp) & NX_CDRP_CMD_BIT) == 0)
+
+#define NX_CDRP_RSP_OK		0x00000001
+#define NX_CDRP_RSP_FAIL	0x00000002
+#define NX_CDRP_RSP_TIMEOUT	0x00000003
+
+/*
+ * All commands must have the NX_CDRP_CMD_BIT set in
+ * the crb NX_CDRP_CRB_OFFSET.
+ */
+#define NX_CDRP_FORM_CMD(cmd)	(NX_CDRP_CMD_BIT | (cmd))
+#define NX_CDRP_IS_CMD(cmd)	(((cmd) & NX_CDRP_CMD_BIT) != 0)
+
+#define NX_CDRP_CMD_SUBMIT_CAPABILITIES     0x00000001
+#define NX_CDRP_CMD_READ_MAX_RDS_PER_CTX    0x00000002
+#define NX_CDRP_CMD_READ_MAX_SDS_PER_CTX    0x00000003
+#define NX_CDRP_CMD_READ_MAX_RULES_PER_CTX  0x00000004
+#define NX_CDRP_CMD_READ_MAX_RX_CTX         0x00000005
+#define NX_CDRP_CMD_READ_MAX_TX_CTX         0x00000006
+#define NX_CDRP_CMD_CREATE_RX_CTX           0x00000007
+#define NX_CDRP_CMD_DESTROY_RX_CTX          0x00000008
+#define NX_CDRP_CMD_CREATE_TX_CTX           0x00000009
+#define NX_CDRP_CMD_DESTROY_TX_CTX          0x0000000a
+#define NX_CDRP_CMD_SETUP_STATISTICS        0x0000000e
+#define NX_CDRP_CMD_GET_STATISTICS          0x0000000f
+#define NX_CDRP_CMD_DELETE_STATISTICS       0x00000010
+#define NX_CDRP_CMD_SET_MTU                 0x00000012
+#define NX_CDRP_CMD_MAX                     0x00000013
+
+#define NX_RCODE_SUCCESS		0
+#define NX_RCODE_NO_HOST_MEM		1
+#define NX_RCODE_NO_HOST_RESOURCE	2
+#define NX_RCODE_NO_CARD_CRB		3
+#define NX_RCODE_NO_CARD_MEM		4
+#define NX_RCODE_NO_CARD_RESOURCE	5
+#define NX_RCODE_INVALID_ARGS		6
+#define NX_RCODE_INVALID_ACTION		7
+#define NX_RCODE_INVALID_STATE		8
+#define NX_RCODE_NOT_SUPPORTED		9
+#define NX_RCODE_NOT_PERMITTED		10
+#define NX_RCODE_NOT_READY		11
+#define NX_RCODE_DOES_NOT_EXIST		12
+#define NX_RCODE_ALREADY_EXISTS		13
+#define NX_RCODE_BAD_SIGNATURE		14
+#define NX_RCODE_CMD_NOT_IMPL		15
+#define NX_RCODE_CMD_INVALID		16
+#define NX_RCODE_TIMEOUT		17
+#define NX_RCODE_CMD_FAILED		18
+#define NX_RCODE_MAX_EXCEEDED		19
+#define NX_RCODE_MAX			20
+
+#define NX_DESTROY_CTX_RESET		0
+#define NX_DESTROY_CTX_D3_RESET		1
+#define NX_DESTROY_CTX_MAX		2
+
+/*
+ * Capabilities
+ */
+#define NX_CAP_BIT(class, bit)		(1 << bit)
+#define NX_CAP0_LEGACY_CONTEXT		NX_CAP_BIT(0, 0)
+#define NX_CAP0_MULTI_CONTEXT		NX_CAP_BIT(0, 1)
+#define NX_CAP0_LEGACY_MN		NX_CAP_BIT(0, 2)
+#define NX_CAP0_LEGACY_MS		NX_CAP_BIT(0, 3)
+#define NX_CAP0_CUT_THROUGH		NX_CAP_BIT(0, 4)
+#define NX_CAP0_LRO			NX_CAP_BIT(0, 5)
+#define NX_CAP0_LSO			NX_CAP_BIT(0, 6)
+#define NX_CAP0_JUMBO_CONTIGUOUS	NX_CAP_BIT(0, 7)
+#define NX_CAP0_LRO_CONTIGUOUS		NX_CAP_BIT(0, 8)
+
+/*
+ * Context state
+ */
+#define NX_HOST_CTX_STATE_FREED		0
+#define NX_HOST_CTX_STATE_ALLOCATED	1
+#define NX_HOST_CTX_STATE_ACTIVE	2
+#define NX_HOST_CTX_STATE_DISABLED	3
+#define NX_HOST_CTX_STATE_QUIESCED	4
+#define NX_HOST_CTX_STATE_MAX		5
+
+/*
+ * Rx context
+ */
+
+typedef struct {
+	u64 host_phys_addr;	/* Ring base addr */
+	u32 ring_size;		/* Ring entries */
+	u16 msi_index;
+	u16 rsvd;		/* Padding */
+} nx_hostrq_sds_ring_t;
+
+typedef struct {
+	u64 host_phys_addr;	/* Ring base addr */
+	u64 buff_size;		/* Packet buffer size */
+	u32 ring_size;		/* Ring entries */
+	u32 ring_kind;		/* Class of ring */
+} nx_hostrq_rds_ring_t;
+
+typedef struct {
+	u64 host_rsp_dma_addr;	/* Response dma'd here */
+	u32 capabilities[4];	/* Flag bit vector */
+	u32 host_int_crb_mode;	/* Interrupt crb usage */
+	u32 host_rds_crb_mode;	/* RDS crb usage */
+	/* These ring offsets are relative to data[0] below */
+	u32 rds_ring_offset;	/* Offset to RDS config */
+	u32 sds_ring_offset;	/* Offset to SDS config */
+	u16 num_rds_rings;	/* Count of RDS rings */
+	u16 num_sds_rings;	/* Count of SDS rings */
+	u16 rsvd1;		/* Padding */
+	u16 rsvd2;		/* Padding */
+	u8  reserved[128]; 	/* reserve space for future expansion*/
+	/* MUST BE 64-bit aligned.
+	   The following is packed:
+	   - N hostrq_rds_rings
+	   - N hostrq_sds_rings */
+	char data[0];
+} nx_hostrq_rx_ctx_t;
+
+typedef struct {
+	u32 host_producer_crb;	/* Crb to use */
+	u32 rsvd1;		/* Padding */
+} nx_cardrsp_rds_ring_t;
+
+typedef struct {
+	u32 host_consumer_crb;	/* Crb to use */
+	u32 interrupt_crb;	/* Crb to use */
+} nx_cardrsp_sds_ring_t;
+
+typedef struct {
+	/* These ring offsets are relative to data[0] below */
+	u32 rds_ring_offset;	/* Offset to RDS config */
+	u32 sds_ring_offset;	/* Offset to SDS config */
+	u32 host_ctx_state;	/* Starting State */
+	u32 num_fn_per_port;	/* How many PCI fn share the port */
+	u16 num_rds_rings;	/* Count of RDS rings */
+	u16 num_sds_rings;	/* Count of SDS rings */
+	u16 context_id;		/* Handle for context */
+	u8  phys_port;		/* Physical id of port */
+	u8  virt_port;		/* Virtual/Logical id of port */
+	u8  reserved[128];	/* save space for future expansion */
+	/*  MUST BE 64-bit aligned.
+	   The following is packed:
+	   - N cardrsp_rds_rings
+	   - N cardrs_sds_rings */
+	char data[0];
+} nx_cardrsp_rx_ctx_t;
+
+#define SIZEOF_HOSTRQ_RX(HOSTRQ_RX, rds_rings, sds_rings)	\
+	(sizeof(HOSTRQ_RX) + 					\
+	(rds_rings)*(sizeof(nx_hostrq_rds_ring_t)) +		\
+	(sds_rings)*(sizeof(nx_hostrq_sds_ring_t)))
+
+#define SIZEOF_CARDRSP_RX(CARDRSP_RX, rds_rings, sds_rings) 	\
+	(sizeof(CARDRSP_RX) + 					\
+	(rds_rings)*(sizeof(nx_cardrsp_rds_ring_t)) + 		\
+	(sds_rings)*(sizeof(nx_cardrsp_sds_ring_t)))
+
+/*
+ * Tx context
+ */
+
+typedef struct {
+	u64 host_phys_addr;	/* Ring base addr */
+	u32 ring_size;		/* Ring entries */
+	u32 rsvd;		/* Padding */
+} nx_hostrq_cds_ring_t;
+
+typedef struct {
+	u64 host_rsp_dma_addr;	/* Response dma'd here */
+	u64 cmd_cons_dma_addr;	/*  */
+	u64 dummy_dma_addr;	/*  */
+	u32 capabilities[4];	/* Flag bit vector */
+	u32 host_int_crb_mode;	/* Interrupt crb usage */
+	u32 rsvd1;		/* Padding */
+	u16 rsvd2;		/* Padding */
+	u16 interrupt_ctl;
+	u16 msi_index;
+	u16 rsvd3;		/* Padding */
+	nx_hostrq_cds_ring_t cds_ring;	/* Desc of cds ring */
+	u8  reserved[128];	/* future expansion */
+} nx_hostrq_tx_ctx_t;
+
+typedef struct {
+	u32 host_producer_crb;	/* Crb to use */
+	u32 interrupt_crb;	/* Crb to use */
+} nx_cardrsp_cds_ring_t;
+
+typedef struct {
+	u32 host_ctx_state;	/* Starting state */
+	u16 context_id;		/* Handle for context */
+	u8  phys_port;		/* Physical id of port */
+	u8  virt_port;		/* Virtual/Logical id of port */
+	nx_cardrsp_cds_ring_t cds_ring;	/* Card cds settings */
+	u8  reserved[128];	/* future expansion */
+} nx_cardrsp_tx_ctx_t;
+
+#define SIZEOF_HOSTRQ_TX(HOSTRQ_TX)	(sizeof(HOSTRQ_TX))
+#define SIZEOF_CARDRSP_TX(CARDRSP_TX)	(sizeof(CARDRSP_TX))
+
+/* CRB */
+
+#define NX_HOST_RDS_CRB_MODE_UNIQUE	0
+#define NX_HOST_RDS_CRB_MODE_SHARED	1
+#define NX_HOST_RDS_CRB_MODE_CUSTOM	2
+#define NX_HOST_RDS_CRB_MODE_MAX	3
+
+#define NX_HOST_INT_CRB_MODE_UNIQUE	0
+#define NX_HOST_INT_CRB_MODE_SHARED	1
+#define NX_HOST_INT_CRB_MODE_NORX	2
+#define NX_HOST_INT_CRB_MODE_NOTX	3
+#define NX_HOST_INT_CRB_MODE_NORXTX	4
+
+
+/* MAC */
+
+#define MC_COUNT_P2	16
+#define MC_COUNT_P3	38
+
+#define NETXEN_MAC_NOOP	0
+#define NETXEN_MAC_ADD	1
+#define NETXEN_MAC_DEL	2
+
+typedef struct nx_mac_list_s {
+	struct nx_mac_list_s *next;
+	uint8_t mac_addr[MAX_ADDR_LEN];
+} nx_mac_list_t;
+
+typedef struct {
+	u64 qhdr;
+	u64 req_hdr;
+	u64 words[6];
+} nic_request_t;
+
+typedef struct {
+	u8 op;
+	u8 tag;
+	u8 mac_addr[6];
+} nx_mac_req_t;
+
+
 #define NETXEN_NIC_MSI_ENABLED		0x02
 #define NETXEN_NIC_MSIX_ENABLED		0x04
 #define NETXEN_IS_MSI_FAMILY(adapter) \
@@ -899,11 +1156,13 @@ struct netxen_adapter {
 	int mtu;
 	int portnum;
 	u8 physical_port;
+	u16 tx_context_id;
 
 	uint8_t		mc_enabled;
 	uint8_t		max_mc_count;
 
 	struct netxen_legacy_intr_set legacy_intr;
+	u32	crb_intr_mask;
 
 	struct work_struct watchdog_task;
 	struct timer_list watchdog_timer;
@@ -926,6 +1185,8 @@ struct netxen_adapter {
 	u32 max_jumbo_rx_desc_count;
 	u32 max_lro_rx_desc_count;
 
+	int max_rds_rings;
+
 	u32 flags;
 	u32 irq;
 	int driver_mismatch;
@@ -1144,7 +1405,10 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
 int netxen_process_cmd_ring(struct netxen_adapter *adapter);
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
 void netxen_nic_set_multi(struct net_device *netdev);
+
+u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu);
 int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
+
 int netxen_nic_set_mac(struct net_device *netdev, void *p);
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
 
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 7e49e610607..381d55a5216 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -524,9 +524,9 @@ netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 	ring->rx_jumbo_pending = 0;
 	for (i = 0; i < MAX_RCV_CTX; ++i) {
 		ring->rx_pending += adapter->recv_ctx[i].
-		    rcv_desc[RCV_DESC_NORMAL_CTXID].max_rx_desc_count;
+		    rds_rings[RCV_DESC_NORMAL_CTXID].max_rx_desc_count;
 		ring->rx_jumbo_pending += adapter->recv_ctx[i].
-		    rcv_desc[RCV_DESC_JUMBO_CTXID].max_rx_desc_count;
+		    rds_rings[RCV_DESC_JUMBO_CTXID].max_rx_desc_count;
 	}
 	ring->tx_pending = adapter->max_tx_desc_count;
 
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index fde8c6f1c9f..d46b4dff783 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -280,80 +280,6 @@ static unsigned crb_hub_agt[64] =
 	0,
 };
 
-struct netxen_recv_crb recv_crb_registers[] = {
-	/*
-	 * Instance 0.
-	 */
-	{
-		/* crb_rcv_producer: */
-		{
-			NETXEN_NIC_REG(0x100),
-			/* Jumbo frames */
-			NETXEN_NIC_REG(0x110),
-			/* LRO */
-			NETXEN_NIC_REG(0x120)
-		},
-		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x138),
-	},
-	/*
-	 * Instance 1,
-	 */
-	{
-		/* crb_rcv_producer: */
-		{
-			NETXEN_NIC_REG(0x144),
-			/* Jumbo frames */
-			NETXEN_NIC_REG(0x154),
-			/* LRO */
-			NETXEN_NIC_REG(0x164)
-		},
-		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x17c),
-	},
-	/*
-	 * Instance 2,
-	 */
-	{
-		/* crb_rcv_producer: */
-		{
-			NETXEN_NIC_REG(0x1d8),
-			/* Jumbo frames */
-			NETXEN_NIC_REG(0x1f8),
-			/* LRO */
-			NETXEN_NIC_REG(0x208)
-		},
-		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x220),
-	},
-	/*
-	 * Instance 3,
-	 */
-	{
-		/* crb_rcv_producer: */
-		{
-			NETXEN_NIC_REG(0x22c),
-			/* Jumbo frames */
-			NETXEN_NIC_REG(0x23c),
-			/* LRO */
-			NETXEN_NIC_REG(0x24c)
-		},
-		/* crb_sts_consumer: */
-		NETXEN_NIC_REG(0x264),
-	},
-};
-
-static u64 ctx_addr_sig_regs[][3] = {
-	{NETXEN_NIC_REG(0x188), NETXEN_NIC_REG(0x18c), NETXEN_NIC_REG(0x1c0)},
-	{NETXEN_NIC_REG(0x190), NETXEN_NIC_REG(0x194), NETXEN_NIC_REG(0x1c4)},
-	{NETXEN_NIC_REG(0x198), NETXEN_NIC_REG(0x19c), NETXEN_NIC_REG(0x1c8)},
-	{NETXEN_NIC_REG(0x1a0), NETXEN_NIC_REG(0x1a4), NETXEN_NIC_REG(0x1cc)}
-};
-#define CRB_CTX_ADDR_REG_LO(FUNC_ID)		(ctx_addr_sig_regs[FUNC_ID][0])
-#define CRB_CTX_ADDR_REG_HI(FUNC_ID)		(ctx_addr_sig_regs[FUNC_ID][2])
-#define CRB_CTX_SIGNATURE_REG(FUNC_ID)		(ctx_addr_sig_regs[FUNC_ID][1])
-
-
 /*  PCI Windowing for DDR regions.  */
 
 #define ADDR_IN_RANGE(addr, low, high)	\
@@ -368,10 +294,6 @@ static u64 ctx_addr_sig_regs[][3] = {
 #define NETXEN_NIU_HDRSIZE	(0x1 << 6)
 #define NETXEN_NIU_TLRSIZE	(0x1 << 5)
 
-#define lower32(x)		((u32)((x) & 0xffffffff))
-#define upper32(x)			\
-	((u32)(((unsigned long long)(x) >> 32) & 0xffffffff))
-
 #define NETXEN_NIC_ZERO_PAUSE_ADDR     0ULL
 #define NETXEN_NIC_UNIT_PAUSE_ADDR     0x200ULL
 #define NETXEN_NIC_EPG_PAUSE_ADDR1     0x2200010000c28001ULL
@@ -556,171 +478,6 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
 	return 0;
 }
 
-/*
- * check if the firmware has been downloaded and ready to run  and
- * setup the address for the descriptors in the adapter
- */
-int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
-{
-	struct netxen_hardware_context *hw = &adapter->ahw;
-	u32 state = 0;
-	void *addr;
-	int err = 0;
-	int ctx, ring;
-	struct netxen_recv_context *recv_ctx;
-	struct netxen_rcv_desc_ctx *rcv_desc;
-	int func_id = adapter->portnum;
-
-	err = netxen_receive_peg_ready(adapter);
-	if (err) {
-		printk(KERN_ERR "Rcv Peg initialization not complete:%x.\n",
-				state);
-		return err;
-	}
-	adapter->intr_scheme = adapter->pci_read_normalize(adapter,
-			CRB_NIC_CAPABILITIES_FW);
-	adapter->msi_mode = adapter->pci_read_normalize(adapter,
-			CRB_NIC_MSI_MODE_FW);
-
-	addr = pci_alloc_consistent(adapter->pdev,
-			    sizeof(struct netxen_ring_ctx) + sizeof(uint32_t),
-			    &adapter->ctx_desc_phys_addr);
-
-	if (addr == NULL) {
-		DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
-		err = -ENOMEM;
-		return err;
-	}
-	memset(addr, 0, sizeof(struct netxen_ring_ctx));
-	adapter->ctx_desc = (struct netxen_ring_ctx *)addr;
-	adapter->ctx_desc->ctx_id = cpu_to_le32(adapter->portnum);
-	adapter->ctx_desc->cmd_consumer_offset =
-	    cpu_to_le64(adapter->ctx_desc_phys_addr +
-			sizeof(struct netxen_ring_ctx));
-	adapter->cmd_consumer = (__le32 *) (((char *)addr) +
-					      sizeof(struct netxen_ring_ctx));
-
-	addr = pci_alloc_consistent(adapter->pdev,
-			    sizeof(struct cmd_desc_type0) *
-			    adapter->max_tx_desc_count,
-			    &hw->cmd_desc_phys_addr);
-
-	if (addr == NULL) {
-		DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
-		netxen_free_hw_resources(adapter);
-		return -ENOMEM;
-	}
-
-	adapter->ctx_desc->cmd_ring_addr =
-		cpu_to_le64(hw->cmd_desc_phys_addr);
-	adapter->ctx_desc->cmd_ring_size =
-		cpu_to_le32(adapter->max_tx_desc_count);
-
-	hw->cmd_desc_head = (struct cmd_desc_type0 *)addr;
-
-	for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
-		recv_ctx = &adapter->recv_ctx[ctx];
-
-		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			rcv_desc = &recv_ctx->rcv_desc[ring];
-			addr = pci_alloc_consistent(adapter->pdev,
-					    RCV_DESC_RINGSIZE,
-					    &rcv_desc->phys_addr);
-			if (addr == NULL) {
-				DPRINTK(ERR, "bad return from "
-					"pci_alloc_consistent\n");
-				netxen_free_hw_resources(adapter);
-				err = -ENOMEM;
-				return err;
-			}
-			rcv_desc->desc_head = (struct rcv_desc *)addr;
-			adapter->ctx_desc->rcv_ctx[ring].rcv_ring_addr =
-			    cpu_to_le64(rcv_desc->phys_addr);
-			adapter->ctx_desc->rcv_ctx[ring].rcv_ring_size =
-			    cpu_to_le32(rcv_desc->max_rx_desc_count);
-			rcv_desc->crb_rcv_producer =
-				    recv_crb_registers[adapter->portnum].
-				    crb_rcv_producer[ring];
-		}
-
-		addr = pci_alloc_consistent(adapter->pdev, STATUS_DESC_RINGSIZE,
-				    &recv_ctx->rcv_status_desc_phys_addr);
-		if (addr == NULL) {
-			DPRINTK(ERR, "bad return from"
-				" pci_alloc_consistent\n");
-			netxen_free_hw_resources(adapter);
-			err = -ENOMEM;
-			return err;
-		}
-		recv_ctx->rcv_status_desc_head = (struct status_desc *)addr;
-		adapter->ctx_desc->sts_ring_addr =
-		    cpu_to_le64(recv_ctx->rcv_status_desc_phys_addr);
-		adapter->ctx_desc->sts_ring_size =
-		    cpu_to_le32(adapter->max_rx_desc_count);
-		recv_ctx->crb_sts_consumer =
-			recv_crb_registers[adapter->portnum].crb_sts_consumer;
-
-	}
-	/* Window = 1 */
-
-	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_LO(func_id),
-			lower32(adapter->ctx_desc_phys_addr));
-	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_HI(func_id),
-			upper32(adapter->ctx_desc_phys_addr));
-	adapter->pci_write_normalize(adapter, CRB_CTX_SIGNATURE_REG(func_id),
-			NETXEN_CTX_SIGNATURE | func_id);
-	return err;
-}
-
-void netxen_free_hw_resources(struct netxen_adapter *adapter)
-{
-	struct netxen_recv_context *recv_ctx;
-	struct netxen_rcv_desc_ctx *rcv_desc;
-	int ctx, ring;
-
-	if (adapter->ctx_desc != NULL) {
-		pci_free_consistent(adapter->pdev,
-				    sizeof(struct netxen_ring_ctx) +
-				    sizeof(uint32_t),
-				    adapter->ctx_desc,
-				    adapter->ctx_desc_phys_addr);
-		adapter->ctx_desc = NULL;
-	}
-
-	if (adapter->ahw.cmd_desc_head != NULL) {
-		pci_free_consistent(adapter->pdev,
-				    sizeof(struct cmd_desc_type0) *
-				    adapter->max_tx_desc_count,
-				    adapter->ahw.cmd_desc_head,
-				    adapter->ahw.cmd_desc_phys_addr);
-		adapter->ahw.cmd_desc_head = NULL;
-	}
-
-	for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
-		recv_ctx = &adapter->recv_ctx[ctx];
-		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			rcv_desc = &recv_ctx->rcv_desc[ring];
-
-			if (rcv_desc->desc_head != NULL) {
-				pci_free_consistent(adapter->pdev,
-						    RCV_DESC_RINGSIZE,
-						    rcv_desc->desc_head,
-						    rcv_desc->phys_addr);
-				rcv_desc->desc_head = NULL;
-			}
-		}
-
-		if (recv_ctx->rcv_status_desc_head != NULL) {
-			pci_free_consistent(adapter->pdev,
-					    STATUS_DESC_RINGSIZE,
-					    recv_ctx->rcv_status_desc_head,
-					    recv_ctx->
-					    rcv_status_desc_phys_addr);
-			recv_ctx->rcv_status_desc_head = NULL;
-		}
-	}
-}
-
 void netxen_tso_check(struct netxen_adapter *adapter,
 		      struct cmd_desc_type0 *desc, struct sk_buff *skb)
 {
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 7c3fbc4a572..d222436bd5b 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -158,21 +158,21 @@ int netxen_init_firmware(struct netxen_adapter *adapter)
 void netxen_release_rx_buffers(struct netxen_adapter *adapter)
 {
 	struct netxen_recv_context *recv_ctx;
-	struct netxen_rcv_desc_ctx *rcv_desc;
+	struct nx_host_rds_ring *rds_ring;
 	struct netxen_rx_buffer *rx_buf;
 	int i, ctxid, ring;
 
 	for (ctxid = 0; ctxid < MAX_RCV_CTX; ++ctxid) {
 		recv_ctx = &adapter->recv_ctx[ctxid];
-		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			rcv_desc = &recv_ctx->rcv_desc[ring];
-			for (i = 0; i < rcv_desc->max_rx_desc_count; ++i) {
-				rx_buf = &(rcv_desc->rx_buf_arr[i]);
+		for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+			rds_ring = &recv_ctx->rds_rings[ring];
+			for (i = 0; i < rds_ring->max_rx_desc_count; ++i) {
+				rx_buf = &(rds_ring->rx_buf_arr[i]);
 				if (rx_buf->state == NETXEN_BUFFER_FREE)
 					continue;
 				pci_unmap_single(adapter->pdev,
 						rx_buf->dma,
-						rcv_desc->dma_size,
+						rds_ring->dma_size,
 						PCI_DMA_FROMDEVICE);
 				if (rx_buf->skb != NULL)
 					dev_kfree_skb_any(rx_buf->skb);
@@ -216,16 +216,16 @@ void netxen_release_tx_buffers(struct netxen_adapter *adapter)
 void netxen_free_sw_resources(struct netxen_adapter *adapter)
 {
 	struct netxen_recv_context *recv_ctx;
-	struct netxen_rcv_desc_ctx *rcv_desc;
+	struct nx_host_rds_ring *rds_ring;
 	int ctx, ring;
 
 	for (ctx = 0; ctx < MAX_RCV_CTX; ctx++) {
 		recv_ctx = &adapter->recv_ctx[ctx];
-		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			rcv_desc = &recv_ctx->rcv_desc[ring];
-			if (rcv_desc->rx_buf_arr) {
-				vfree(rcv_desc->rx_buf_arr);
-				rcv_desc->rx_buf_arr = NULL;
+		for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+			rds_ring = &recv_ctx->rds_rings[ring];
+			if (rds_ring->rx_buf_arr) {
+				vfree(rds_ring->rx_buf_arr);
+				rds_ring->rx_buf_arr = NULL;
 			}
 		}
 	}
@@ -237,7 +237,7 @@ void netxen_free_sw_resources(struct netxen_adapter *adapter)
 int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 {
 	struct netxen_recv_context *recv_ctx;
-	struct netxen_rcv_desc_ctx *rcv_desc;
+	struct nx_host_rds_ring *rds_ring;
 	struct netxen_rx_buffer *rx_buf;
 	int ctx, ring, i, num_rx_bufs;
 
@@ -255,52 +255,52 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 
 	for (ctx = 0; ctx < MAX_RCV_CTX; ctx++) {
 		recv_ctx = &adapter->recv_ctx[ctx];
-		for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
-			rcv_desc = &recv_ctx->rcv_desc[ring];
+		for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+			rds_ring = &recv_ctx->rds_rings[ring];
 			switch (RCV_DESC_TYPE(ring)) {
 			case RCV_DESC_NORMAL:
-				rcv_desc->max_rx_desc_count =
+				rds_ring->max_rx_desc_count =
 					adapter->max_rx_desc_count;
-				rcv_desc->flags = RCV_DESC_NORMAL;
-				rcv_desc->dma_size = RX_DMA_MAP_LEN;
-				rcv_desc->skb_size = MAX_RX_BUFFER_LENGTH;
+				rds_ring->flags = RCV_DESC_NORMAL;
+				rds_ring->dma_size = RX_DMA_MAP_LEN;
+				rds_ring->skb_size = MAX_RX_BUFFER_LENGTH;
 				break;
 
 			case RCV_DESC_JUMBO:
-				rcv_desc->max_rx_desc_count =
+				rds_ring->max_rx_desc_count =
 					adapter->max_jumbo_rx_desc_count;
-				rcv_desc->flags = RCV_DESC_JUMBO;
-				rcv_desc->dma_size = RX_JUMBO_DMA_MAP_LEN;
-				rcv_desc->skb_size =
+				rds_ring->flags = RCV_DESC_JUMBO;
+				rds_ring->dma_size = RX_JUMBO_DMA_MAP_LEN;
+				rds_ring->skb_size =
 					MAX_RX_JUMBO_BUFFER_LENGTH;
 				break;
 
 			case RCV_RING_LRO:
-				rcv_desc->max_rx_desc_count =
+				rds_ring->max_rx_desc_count =
 					adapter->max_lro_rx_desc_count;
-				rcv_desc->flags = RCV_DESC_LRO;
-				rcv_desc->dma_size = RX_LRO_DMA_MAP_LEN;
-				rcv_desc->skb_size = MAX_RX_LRO_BUFFER_LENGTH;
+				rds_ring->flags = RCV_DESC_LRO;
+				rds_ring->dma_size = RX_LRO_DMA_MAP_LEN;
+				rds_ring->skb_size = MAX_RX_LRO_BUFFER_LENGTH;
 				break;
 
 			}
-			rcv_desc->rx_buf_arr = (struct netxen_rx_buffer *)
+			rds_ring->rx_buf_arr = (struct netxen_rx_buffer *)
 				vmalloc(RCV_BUFFSIZE);
-			if (rcv_desc->rx_buf_arr == NULL) {
+			if (rds_ring->rx_buf_arr == NULL) {
 				printk(KERN_ERR "%s: Failed to allocate "
 					"rx buffer ring %d\n",
 					netdev->name, ring);
 				/* free whatever was already allocated */
 				goto err_out;
 			}
-			memset(rcv_desc->rx_buf_arr, 0, RCV_BUFFSIZE);
-			rcv_desc->begin_alloc = 0;
+			memset(rds_ring->rx_buf_arr, 0, RCV_BUFFSIZE);
+			rds_ring->begin_alloc = 0;
 			/*
 			 * Now go through all of them, set reference handles
 			 * and put them in the queues.
 			 */
-			num_rx_bufs = rcv_desc->max_rx_desc_count;
-			rx_buf = rcv_desc->rx_buf_arr;
+			num_rx_bufs = rds_ring->max_rx_desc_count;
+			rx_buf = rds_ring->rx_buf_arr;
 			for (i = 0; i < num_rx_bufs; i++) {
 				rx_buf->ref_handle = i;
 				rx_buf->state = NETXEN_BUFFER_FREE;
@@ -1154,7 +1154,7 @@ static void netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
 	struct sk_buff *skb;
 	u32 length = netxen_get_sts_totallength(sts_data);
 	u32 desc_ctx;
-	struct netxen_rcv_desc_ctx *rcv_desc;
+	struct nx_host_rds_ring *rds_ring;
 	int ret;
 
 	desc_ctx = netxen_get_sts_type(sts_data);
@@ -1164,13 +1164,13 @@ static void netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
 		return;
 	}
 
-	rcv_desc = &recv_ctx->rcv_desc[desc_ctx];
-	if (unlikely(index > rcv_desc->max_rx_desc_count)) {
+	rds_ring = &recv_ctx->rds_rings[desc_ctx];
+	if (unlikely(index > rds_ring->max_rx_desc_count)) {
 		DPRINTK(ERR, "Got a buffer index:%x Max is %x\n",
-			index, rcv_desc->max_rx_desc_count);
+			index, rds_ring->max_rx_desc_count);
 		return;
 	}
-	buffer = &rcv_desc->rx_buf_arr[index];
+	buffer = &rds_ring->rx_buf_arr[index];
 	if (desc_ctx == RCV_DESC_LRO_CTXID) {
 		buffer->lro_current_frags++;
 		if (netxen_get_sts_desc_lro_last_frag(desc)) {
@@ -1191,7 +1191,7 @@ static void netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
 		}
 	}
 
-	pci_unmap_single(pdev, buffer->dma, rcv_desc->dma_size,
+	pci_unmap_single(pdev, buffer->dma, rds_ring->dma_size,
 			 PCI_DMA_FROMDEVICE);
 
 	skb = (struct sk_buff *)buffer->skb;
@@ -1249,7 +1249,7 @@ u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max)
 		consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1);
 		count++;
 	}
-	for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++)
+	for (ring = 0; ring < adapter->max_rds_rings; ring++)
 		netxen_post_rx_buffers_nodb(adapter, ctxid, ring);
 
 	/* update the consumer index in phantom */
@@ -1340,7 +1340,7 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 	struct pci_dev *pdev = adapter->pdev;
 	struct sk_buff *skb;
 	struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctx]);
-	struct netxen_rcv_desc_ctx *rcv_desc = NULL;
+	struct nx_host_rds_ring *rds_ring = NULL;
 	uint producer;
 	struct rcv_desc *pdesc;
 	struct netxen_rx_buffer *buffer;
@@ -1349,27 +1349,27 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 	netxen_ctx_msg msg = 0;
 	dma_addr_t dma;
 
-	rcv_desc = &recv_ctx->rcv_desc[ringid];
+	rds_ring = &recv_ctx->rds_rings[ringid];
 
-	producer = rcv_desc->producer;
-	index = rcv_desc->begin_alloc;
-	buffer = &rcv_desc->rx_buf_arr[index];
+	producer = rds_ring->producer;
+	index = rds_ring->begin_alloc;
+	buffer = &rds_ring->rx_buf_arr[index];
 	/* We can start writing rx descriptors into the phantom memory. */
 	while (buffer->state == NETXEN_BUFFER_FREE) {
-		skb = dev_alloc_skb(rcv_desc->skb_size);
+		skb = dev_alloc_skb(rds_ring->skb_size);
 		if (unlikely(!skb)) {
 			/*
 			 * TODO
 			 * We need to schedule the posting of buffers to the pegs.
 			 */
-			rcv_desc->begin_alloc = index;
+			rds_ring->begin_alloc = index;
 			DPRINTK(ERR, "netxen_post_rx_buffers: "
 				" allocated only %d buffers\n", count);
 			break;
 		}
 
 		count++;	/* now there should be no failure */
-		pdesc = &rcv_desc->desc_head[producer];
+		pdesc = &rds_ring->desc_head[producer];
 
 #if defined(XGB_DEBUG)
 		*(unsigned long *)(skb->head) = 0xc0debabe;
@@ -1382,7 +1382,7 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 		 * buffer after it has been filled  FSL  TBD TBD
 		 * skb->dev = netdev;
 		 */
-		dma = pci_map_single(pdev, skb->data, rcv_desc->dma_size,
+		dma = pci_map_single(pdev, skb->data, rds_ring->dma_size,
 				     PCI_DMA_FROMDEVICE);
 		pdesc->addr_buffer = cpu_to_le64(dma);
 		buffer->skb = skb;
@@ -1390,36 +1390,40 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 		buffer->dma = dma;
 		/* make a rcv descriptor  */
 		pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
-		pdesc->buffer_length = cpu_to_le32(rcv_desc->dma_size);
+		pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
 		DPRINTK(INFO, "done writing descripter\n");
 		producer =
-		    get_next_index(producer, rcv_desc->max_rx_desc_count);
-		index = get_next_index(index, rcv_desc->max_rx_desc_count);
-		buffer = &rcv_desc->rx_buf_arr[index];
+		    get_next_index(producer, rds_ring->max_rx_desc_count);
+		index = get_next_index(index, rds_ring->max_rx_desc_count);
+		buffer = &rds_ring->rx_buf_arr[index];
 	}
 	/* if we did allocate buffers, then write the count to Phantom */
 	if (count) {
-		rcv_desc->begin_alloc = index;
-		rcv_desc->producer = producer;
+		rds_ring->begin_alloc = index;
+		rds_ring->producer = producer;
 			/* Window = 1 */
 		adapter->pci_write_normalize(adapter,
-				rcv_desc->crb_rcv_producer,
-				(producer-1) & (rcv_desc->max_rx_desc_count-1));
+				rds_ring->crb_rcv_producer,
+				(producer-1) & (rds_ring->max_rx_desc_count-1));
+
+		if (adapter->fw_major < 4) {
 			/*
 			 * Write a doorbell msg to tell phanmon of change in
 			 * receive ring producer
+			 * Only for firmware version < 4.0.0
 			 */
 			netxen_set_msg_peg_id(msg, NETXEN_RCV_PEG_DB_ID);
 			netxen_set_msg_privid(msg);
 			netxen_set_msg_count(msg,
 					     ((producer -
-					       1) & (rcv_desc->
+					       1) & (rds_ring->
 						     max_rx_desc_count - 1)));
 			netxen_set_msg_ctxid(msg, adapter->portnum);
 			netxen_set_msg_opcode(msg, NETXEN_RCV_PRODUCER(ringid));
 			writel(msg,
 			       DB_NORMALIZE(adapter,
 					    NETXEN_RCV_PRODUCER_OFFSET));
+		}
 	}
 }
 
@@ -1429,32 +1433,32 @@ static void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 	struct pci_dev *pdev = adapter->pdev;
 	struct sk_buff *skb;
 	struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctx]);
-	struct netxen_rcv_desc_ctx *rcv_desc = NULL;
+	struct nx_host_rds_ring *rds_ring = NULL;
 	u32 producer;
 	struct rcv_desc *pdesc;
 	struct netxen_rx_buffer *buffer;
 	int count = 0;
 	int index = 0;
 
-	rcv_desc = &recv_ctx->rcv_desc[ringid];
+	rds_ring = &recv_ctx->rds_rings[ringid];
 
-	producer = rcv_desc->producer;
-	index = rcv_desc->begin_alloc;
-	buffer = &rcv_desc->rx_buf_arr[index];
+	producer = rds_ring->producer;
+	index = rds_ring->begin_alloc;
+	buffer = &rds_ring->rx_buf_arr[index];
 	/* We can start writing rx descriptors into the phantom memory. */
 	while (buffer->state == NETXEN_BUFFER_FREE) {
-		skb = dev_alloc_skb(rcv_desc->skb_size);
+		skb = dev_alloc_skb(rds_ring->skb_size);
 		if (unlikely(!skb)) {
 			/*
 			 * We need to schedule the posting of buffers to the pegs.
 			 */
-			rcv_desc->begin_alloc = index;
+			rds_ring->begin_alloc = index;
 			DPRINTK(ERR, "netxen_post_rx_buffers_nodb: "
 				" allocated only %d buffers\n", count);
 			break;
 		}
 		count++;	/* now there should be no failure */
-		pdesc = &rcv_desc->desc_head[producer];
+		pdesc = &rds_ring->desc_head[producer];
 		skb_reserve(skb, 2);
 		/*
 		 * This will be setup when we receive the
@@ -1464,27 +1468,27 @@ static void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 		buffer->skb = skb;
 		buffer->state = NETXEN_BUFFER_BUSY;
 		buffer->dma = pci_map_single(pdev, skb->data,
-					     rcv_desc->dma_size,
+					     rds_ring->dma_size,
 					     PCI_DMA_FROMDEVICE);
 
 		/* make a rcv descriptor  */
 		pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
-		pdesc->buffer_length = cpu_to_le32(rcv_desc->dma_size);
+		pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
 		pdesc->addr_buffer = cpu_to_le64(buffer->dma);
 		producer =
-		    get_next_index(producer, rcv_desc->max_rx_desc_count);
-		index = get_next_index(index, rcv_desc->max_rx_desc_count);
-		buffer = &rcv_desc->rx_buf_arr[index];
+		    get_next_index(producer, rds_ring->max_rx_desc_count);
+		index = get_next_index(index, rds_ring->max_rx_desc_count);
+		buffer = &rds_ring->rx_buf_arr[index];
 	}
 
 	/* if we did allocate buffers, then write the count to Phantom */
 	if (count) {
-		rcv_desc->begin_alloc = index;
-		rcv_desc->producer = producer;
+		rds_ring->begin_alloc = index;
+		rds_ring->producer = producer;
 			/* Window = 1 */
 		adapter->pci_write_normalize(adapter,
-			rcv_desc->crb_rcv_producer,
-				(producer-1) & (rcv_desc->max_rx_desc_count-1));
+			rds_ring->crb_rcv_producer,
+				(producer-1) & (rds_ring->max_rx_desc_count-1));
 			wmb();
 	}
 }
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 2d0963f4d19..03d796d19ad 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -151,22 +151,17 @@ static uint32_t msi_tgt_status[8] = {
 	ISR_INT_TARGET_STATUS_F6, ISR_INT_TARGET_STATUS_F7
 };
 
-static uint32_t sw_int_mask[4] = {
-	CRB_SW_INT_MASK_0, CRB_SW_INT_MASK_1,
-	CRB_SW_INT_MASK_2, CRB_SW_INT_MASK_3
-};
-
 static struct netxen_legacy_intr_set legacy_intr[] = NX_LEGACY_INTR_CONFIG;
 
 static void netxen_nic_disable_int(struct netxen_adapter *adapter)
 {
 	u32 mask = 0x7ff;
 	int retries = 32;
-	int port = adapter->portnum;
 	int pci_fn = adapter->ahw.pci_func;
 
 	if (adapter->msi_mode != MSI_MODE_MULTIFUNC)
-		adapter->pci_write_normalize(adapter, sw_int_mask[port], 0);
+		adapter->pci_write_normalize(adapter,
+				adapter->crb_intr_mask, 0);
 
 	if (adapter->intr_scheme != -1 &&
 	    adapter->intr_scheme != INTR_SCHEME_PERPORT)
@@ -198,7 +193,6 @@ static void netxen_nic_disable_int(struct netxen_adapter *adapter)
 static void netxen_nic_enable_int(struct netxen_adapter *adapter)
 {
 	u32 mask;
-	int port = adapter->portnum;
 
 	DPRINTK(1, INFO, "Entered ISR Enable \n");
 
@@ -219,7 +213,7 @@ static void netxen_nic_enable_int(struct netxen_adapter *adapter)
 		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
 	}
 
-	adapter->pci_write_normalize(adapter, sw_int_mask[port], 0x1);
+	adapter->pci_write_normalize(adapter, adapter->crb_intr_mask, 0x1);
 
 	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
 		mask = 0xbff;
@@ -710,10 +704,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->status   &= ~NETXEN_NETDEV_STATUS;
 	adapter->rx_csum = 1;
 	adapter->mc_enabled = 0;
-	if (NX_IS_REVISION_P3(revision_id))
+	if (NX_IS_REVISION_P3(revision_id)) {
 		adapter->max_mc_count = 38;
-	else
+		adapter->max_rds_rings = 2;
+	} else {
 		adapter->max_mc_count = 16;
+		adapter->max_rds_rings = 3;
+	}
 
 	netdev->open		   = netxen_nic_open;
 	netdev->stop		   = netxen_nic_close;
@@ -1081,7 +1078,7 @@ static int netxen_nic_open(struct net_device *netdev)
 		netxen_nic_update_cmd_consumer(adapter, 0);
 
 		for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
-			for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++)
+			for (ring = 0; ring < adapter->max_rds_rings; ring++)
 				netxen_post_rx_buffers(adapter, ctx, ring);
 		}
 		if (NETXEN_IS_MSI_FAMILY(adapter))
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index 09d07051236..a63762394a8 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -161,8 +161,6 @@ struct netxen_recv_crb {
 	u32 crb_sts_consumer;
 };
 
-extern struct netxen_recv_crb recv_crb_registers[];
-
 /*
  * Temperature control.
  */
-- 
cgit v1.2.3


From c9fc891f86c062449116fde8826a0ead650e17ac Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:07 -0700
Subject: netxen: mtu, mac, link status changes

MAC addr, multicast filters, mtu are set through firmware commands
in firmware v4.0.0+ because of virtualization of physical ports.
Link status is also read from registers allocated by firmware for
each virtual port.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h          |  12 +-
 drivers/net/netxen/netxen_nic_hdr.h      |   6 +
 drivers/net/netxen/netxen_nic_hw.c       | 198 ++++++++++++++++++++++++++++---
 drivers/net/netxen/netxen_nic_init.c     |   2 +-
 drivers/net/netxen/netxen_nic_main.c     |  35 ++++--
 drivers/net/netxen/netxen_nic_niu.c      |  22 ++--
 drivers/net/netxen/netxen_nic_phan_reg.h |   4 +-
 7 files changed, 236 insertions(+), 43 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 936219010e4..e41f62352b1 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1119,7 +1119,7 @@ typedef struct {
 	u64 qhdr;
 	u64 req_hdr;
 	u64 words[6];
-} nic_request_t;
+} nx_nic_req_t;
 
 typedef struct {
 	u8 op;
@@ -1127,6 +1127,7 @@ typedef struct {
 	u8 mac_addr[6];
 } nx_mac_req_t;
 
+#define MAX_PENDING_DESC_BLOCK_SIZE	64
 
 #define NETXEN_NIC_MSI_ENABLED		0x02
 #define NETXEN_NIC_MSIX_ENABLED		0x04
@@ -1152,7 +1153,6 @@ struct netxen_adapter {
 	int pci_using_dac;
 	struct napi_struct napi;
 	struct net_device_stats net_stats;
-	unsigned char mac_addr[ETH_ALEN];
 	int mtu;
 	int portnum;
 	u8 physical_port;
@@ -1160,6 +1160,7 @@ struct netxen_adapter {
 
 	uint8_t		mc_enabled;
 	uint8_t		max_mc_count;
+	nx_mac_list_t	*mac_list;
 
 	struct netxen_legacy_intr_set legacy_intr;
 	u32	crb_intr_mask;
@@ -1231,7 +1232,6 @@ struct netxen_adapter {
 	int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
 	int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
 	int (*init_port) (struct netxen_adapter *, int);
-	void (*init_niu) (struct netxen_adapter *);
 	int (*stop_port) (struct netxen_adapter *);
 
 	int (*hw_read_wx)(struct netxen_adapter *, ulong, void *, int);
@@ -1316,7 +1316,6 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter,
 /* Functions available from netxen_nic_hw.c */
 int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu);
 int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu);
-void netxen_nic_init_niu_gb(struct netxen_adapter *adapter);
 void netxen_nic_reg_write(struct netxen_adapter *adapter, u64 off, u32 val);
 int netxen_nic_reg_read(struct netxen_adapter *adapter, u64 off);
 void netxen_nic_write_w0(struct netxen_adapter *adapter, u32 index, u32 value);
@@ -1404,7 +1403,8 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
 			    u32 ringid);
 int netxen_process_cmd_ring(struct netxen_adapter *adapter);
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
-void netxen_nic_set_multi(struct net_device *netdev);
+void netxen_p2_nic_set_multi(struct net_device *netdev);
+void netxen_p3_nic_set_multi(struct net_device *netdev);
 
 u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu);
 int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
@@ -1412,6 +1412,8 @@ int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
 int netxen_nic_set_mac(struct net_device *netdev, void *p);
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
 
+void netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
+		uint32_t crb_producer);
 
 /*
  * NetXen Board information
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 2374d8dc6cf..3ce13e451aa 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -718,6 +718,12 @@ enum {
 #define XG_LINK_UP	0x10
 #define XG_LINK_DOWN	0x20
 
+#define XG_LINK_UP_P3	0x01
+#define XG_LINK_DOWN_P3	0x02
+#define XG_LINK_STATE_P3_MASK 0xf
+#define XG_LINK_STATE_P3(pcifn,val) \
+	(((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK)
+
 #define NETXEN_CAM_RAM_BASE	(NETXEN_CRB_CAM + 0x02000)
 #define NETXEN_CAM_RAM(reg)	(NETXEN_CAM_RAM_BASE + (reg))
 #define NETXEN_FW_VERSION_MAJOR (NETXEN_CAM_RAM(0x150))
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index d46b4dff783..9d4e9c9dbe0 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -314,8 +314,10 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p)
 
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 
-	if (adapter->macaddr_set)
-		adapter->macaddr_set(adapter, addr->sa_data);
+	/* For P3, MAC addr is not set in NIU */
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		if (adapter->macaddr_set)
+			adapter->macaddr_set(adapter, addr->sa_data);
 
 	return 0;
 }
@@ -405,10 +407,7 @@ netxen_nic_set_mcast_addr(struct netxen_adapter *adapter,
 	return 0;
 }
 
-/*
- * netxen_nic_set_multi - Multicast
- */
-void netxen_nic_set_multi(struct net_device *netdev)
+void netxen_p2_nic_set_multi(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	struct dev_mc_list *mc_ptr;
@@ -456,18 +455,186 @@ void netxen_nic_set_multi(struct net_device *netdev)
 		netxen_nic_set_mcast_addr(adapter, index, null_addr);
 }
 
+static int nx_p3_nic_add_mac(struct netxen_adapter *adapter,
+		u8 *addr, nx_mac_list_t **add_list, nx_mac_list_t **del_list)
+{
+	nx_mac_list_t *cur, *prev;
+
+	/* if in del_list, move it to adapter->mac_list */
+	for (cur = *del_list, prev = NULL; cur;) {
+		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0) {
+			if (prev == NULL)
+				*del_list = cur->next;
+			else
+				prev->next = cur->next;
+			cur->next = adapter->mac_list;
+			adapter->mac_list = cur;
+			return 0;
+		}
+		prev = cur;
+		cur = cur->next;
+	}
+
+	/* make sure to add each mac address only once */
+	for (cur = adapter->mac_list; cur; cur = cur->next) {
+		if (memcmp(addr, cur->mac_addr, ETH_ALEN) == 0)
+			return 0;
+	}
+	/* not in del_list, create new entry and add to add_list */
+	cur = kmalloc(sizeof(*cur), in_atomic()? GFP_ATOMIC : GFP_KERNEL);
+	if (cur == NULL) {
+		printk(KERN_ERR "%s: cannot allocate memory. MAC filtering may"
+				"not work properly from now.\n", __func__);
+		return -1;
+	}
+
+	memcpy(cur->mac_addr, addr, ETH_ALEN);
+	cur->next = *add_list;
+	*add_list = cur;
+	return 0;
+}
+
+static int
+netxen_send_cmd_descs(struct netxen_adapter *adapter,
+		struct cmd_desc_type0 *cmd_desc_arr, int nr_elements)
+{
+	uint32_t i, producer;
+	struct netxen_cmd_buffer *pbuf;
+	struct cmd_desc_type0 *cmd_desc;
+
+	if (nr_elements > MAX_PENDING_DESC_BLOCK_SIZE || nr_elements == 0) {
+		printk(KERN_WARNING "%s: Too many command descriptors in a "
+			      "request\n", __func__);
+		return -EINVAL;
+	}
+
+	i = 0;
+
+	producer = adapter->cmd_producer;
+	do {
+		cmd_desc = &cmd_desc_arr[i];
+
+		pbuf = &adapter->cmd_buf_arr[producer];
+		pbuf->mss = 0;
+		pbuf->total_length = 0;
+		pbuf->skb = NULL;
+		pbuf->cmd = 0;
+		pbuf->frag_count = 0;
+		pbuf->port = 0;
+
+		/* adapter->ahw.cmd_desc_head[producer] = *cmd_desc; */
+		memcpy(&adapter->ahw.cmd_desc_head[producer],
+			&cmd_desc_arr[i], sizeof(struct cmd_desc_type0));
+
+		producer = get_next_index(producer,
+				adapter->max_tx_desc_count);
+		i++;
+
+	} while (i != nr_elements);
+
+	adapter->cmd_producer = producer;
+
+	/* write producer index to start the xmit */
+
+	netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
+
+	return 0;
+}
+
+#define NIC_REQUEST		0x14
+#define NETXEN_MAC_EVENT	0x1
+
+static int nx_p3_sre_macaddr_change(struct net_device *dev,
+		u8 *addr, unsigned op)
+{
+	struct netxen_adapter *adapter = (struct netxen_adapter *)dev->priv;
+	nx_nic_req_t req;
+	nx_mac_req_t mac_req;
+	int rv;
+
+	memset(&req, 0, sizeof(nx_nic_req_t));
+	req.qhdr |= (NIC_REQUEST << 23);
+	req.req_hdr |= NETXEN_MAC_EVENT;
+	req.req_hdr |= ((u64)adapter->portnum << 16);
+	mac_req.op = op;
+	memcpy(&mac_req.mac_addr, addr, 6);
+	req.words[0] = cpu_to_le64(*(u64 *)&mac_req);
+
+	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0) {
+		printk(KERN_ERR "ERROR. Could not send mac update\n");
+		return rv;
+	}
+
+	return 0;
+}
+
+void netxen_p3_nic_set_multi(struct net_device *netdev)
+{
+	struct netxen_adapter *adapter = netdev_priv(netdev);
+	nx_mac_list_t *cur, *next, *del_list, *add_list = NULL;
+	struct dev_mc_list *mc_ptr;
+	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+	adapter->set_promisc(adapter, NETXEN_NIU_PROMISC_MODE);
+
+	/*
+	 * Programming mac addresses will automaticly enabling L2 filtering.
+	 * HW will replace timestamp with L2 conid when L2 filtering is
+	 * enabled. This causes problem for LSA. Do not enabling L2 filtering
+	 * until that problem is fixed.
+	 */
+	if ((netdev->flags & IFF_PROMISC) ||
+			(netdev->mc_count > adapter->max_mc_count))
+		return;
+
+	del_list = adapter->mac_list;
+	adapter->mac_list = NULL;
+
+	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list);
+	if (netdev->mc_count > 0) {
+		nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
+		for (mc_ptr = netdev->mc_list; mc_ptr;
+		     mc_ptr = mc_ptr->next) {
+			nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr,
+					  &add_list, &del_list);
+		}
+	}
+	for (cur = del_list; cur;) {
+		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL);
+		next = cur->next;
+		kfree(cur);
+		cur = next;
+	}
+	for (cur = add_list; cur;) {
+		nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_ADD);
+		next = cur->next;
+		cur->next = adapter->mac_list;
+		adapter->mac_list = cur;
+		cur = next;
+	}
+}
+
 /*
  * netxen_nic_change_mtu - Change the Maximum Transfer Unit
  * @returns 0 on success, negative on failure
  */
+
+#define MTU_FUDGE_FACTOR	100
+
 int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
-	int eff_mtu = mtu + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE;
+	int max_mtu;
 
-	if ((eff_mtu > NETXEN_MAX_MTU) || (eff_mtu < NETXEN_MIN_MTU)) {
-		printk(KERN_ERR "%s: %s %d is not supported.\n",
-		       netxen_nic_driver_name, netdev->name, mtu);
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		max_mtu = P3_MAX_MTU;
+	else
+		max_mtu = P2_MAX_MTU;
+
+	if (mtu > max_mtu) {
+		printk(KERN_ERR "%s: mtu > %d bytes unsupported\n",
+				netdev->name, max_mtu);
 		return -EINVAL;
 	}
 
@@ -475,6 +642,12 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
 		adapter->set_mtu(adapter, mtu);
 	netdev->mtu = mtu;
 
+	mtu += MTU_FUDGE_FACTOR;
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		nx_fw_cmd_set_mtu(adapter, mtu);
+	else if (adapter->set_mtu)
+		adapter->set_mtu(adapter, mtu);
+
 	return 0;
 }
 
@@ -1882,11 +2055,6 @@ int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
 	return 0;
 }
 
-void netxen_nic_init_niu_gb(struct netxen_adapter *adapter)
-{
-	netxen_niu_gbe_init_port(adapter, adapter->physical_port);
-}
-
 void
 netxen_crb_writelit_adapter(struct netxen_adapter *adapter,
 		unsigned long off, int data)
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index d222436bd5b..7b512405766 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -329,7 +329,7 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
 		adapter->set_promisc = netxen_niu_set_promiscuous_mode;
 		adapter->phy_read = netxen_niu_gbe_phy_read;
 		adapter->phy_write = netxen_niu_gbe_phy_write;
-		adapter->init_niu = netxen_nic_init_niu_gb;
+		adapter->init_port = netxen_niu_gbe_init_port;
 		adapter->stop_port = netxen_niu_disable_gbe_port;
 		break;
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 03d796d19ad..df48f89afff 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -123,7 +123,7 @@ static uint32_t crb_cmd_producer[4] = {
 	CRB_CMD_PRODUCER_OFFSET_2, CRB_CMD_PRODUCER_OFFSET_3
 };
 
-static inline void
+void
 netxen_nic_update_cmd_producer(struct netxen_adapter *adapter,
 		uint32_t crb_producer)
 {
@@ -716,7 +716,10 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->stop		   = netxen_nic_close;
 	netdev->hard_start_xmit    = netxen_nic_xmit_frame;
 	netdev->get_stats	   = netxen_nic_get_stats;
-	netdev->set_multicast_list = netxen_nic_set_multi;
+	if (NX_IS_REVISION_P3(revision_id))
+		netdev->set_multicast_list = netxen_p3_nic_set_multi;
+	else
+		netdev->set_multicast_list = netxen_p2_nic_set_multi;
 	netdev->set_mac_address    = netxen_nic_set_mac;
 	netdev->change_mtu	   = netxen_nic_change_mtu;
 	netdev->tx_timeout	   = netxen_tx_timeout;
@@ -1100,7 +1103,7 @@ static int netxen_nic_open(struct net_device *netdev)
 
 	/* Done here again so that even if phantom sw overwrote it,
 	 * we set it */
-	err = adapter->init_port(adapter, adapter->portnum);
+	err = adapter->init_port(adapter, adapter->physical_port);
 	if (err) {
 		printk(KERN_ERR "%s: Failed to initialize port %d\n",
 				netxen_nic_driver_name, adapter->portnum);
@@ -1110,8 +1113,11 @@ static int netxen_nic_open(struct net_device *netdev)
 
 	netxen_nic_set_link_parameters(adapter);
 
-	netxen_nic_set_multi(netdev);
-	adapter->set_mtu(adapter, netdev->mtu);
+	netdev->set_multicast_list(netdev);
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		nx_fw_cmd_set_mtu(adapter, netdev->mtu);
+	else
+		adapter->set_mtu(adapter, netdev->mtu);
 
 	mod_timer(&adapter->watchdog_timer, jiffies);
 
@@ -1379,12 +1385,21 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 
 	port = adapter->physical_port;
 
-	val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
-	if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+	if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
+		val = adapter->pci_read_normalize(adapter, CRB_XG_STATE);
 		linkup = (val >> port) & 1;
-	else {
-		val = (val >> port*8) & 0xff;
-		linkup = (val == XG_LINK_UP);
+	} else {
+		if (adapter->fw_major < 4) {
+			val = adapter->pci_read_normalize(adapter,
+					CRB_XG_STATE);
+			val = (val >> port*8) & 0xff;
+			linkup = (val == XG_LINK_UP);
+		} else {
+			val = adapter->pci_read_normalize(adapter,
+				CRB_XG_STATE_P3);
+			val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
+			linkup = (val == XG_LINK_UP_P3);
+		}
 	}
 
 	if (adapter->ahw.linkup && !linkup) {
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index 78905d9dd4b..4cb8f4a1cf4 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -400,14 +400,16 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
 {
 	int result = 0;
 	__u32 status;
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return 0;
+
 	if (adapter->disable_phy_interrupts)
 		adapter->disable_phy_interrupts(adapter);
 	mdelay(2);
 
-	if (0 ==
-	    netxen_niu_gbe_phy_read(adapter,
-				    NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-				    &status)) {
+	if (0 == netxen_niu_gbe_phy_read(adapter,
+			NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, &status)) {
 		if (netxen_get_phy_link(status)) {
 			if (netxen_get_phy_speed(status) == 2) {
 				netxen_niu_gbe_set_gmii_mode(adapter, port, 1);
@@ -455,12 +457,12 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port)
 
 int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
 {
-	u32 portnum = adapter->physical_port;
-
-	netxen_crb_writelit_adapter(adapter,
-		NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), 0x1447);
-	netxen_crb_writelit_adapter(adapter,
-		NETXEN_NIU_XGE_CONFIG_0+(0x10000*portnum), 0x5);
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+		netxen_crb_writelit_adapter(adapter,
+			NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447);
+		netxen_crb_writelit_adapter(adapter,
+			NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5);
+	}
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index a63762394a8..3bfa51b62a4 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -76,8 +76,8 @@
 #define CRB_RX_LRO_MID_TIMER        NETXEN_NIC_REG(0x88)
 #define CRB_DMA_MAX_RCV_BUFS        NETXEN_NIC_REG(0x8c)
 #define CRB_MAX_DMA_ENTRIES         NETXEN_NIC_REG(0x90)
-#define CRB_XG_STATE                NETXEN_NIC_REG(0x94)	/* XG Link status */
-#define CRB_AGENT_GO                NETXEN_NIC_REG(0x98)	/* NIC pkt gen agent */
+#define CRB_XG_STATE                NETXEN_NIC_REG(0x94) /* XG Link status */
+#define CRB_XG_STATE_P3             NETXEN_NIC_REG(0x98) /* XG PF Link status */
 #define CRB_AGENT_TX_SIZE           NETXEN_NIC_REG(0x9c)
 #define CRB_AGENT_TX_TYPE           NETXEN_NIC_REG(0xa0)
 #define CRB_AGENT_TX_ADDR           NETXEN_NIC_REG(0xa4)
-- 
cgit v1.2.3


From d9e651bc06690c5a5326e8d019fa7668409bc819 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:08 -0700
Subject: netxen: cut-through rx changes

NX3031 supports cut-through operation where ingress packets are
directly dma'ed into host buffers to reduce latency.

This requires larger dma buffers (2kb) and different alignemnt.

The buffer posting logic is changed a bit. The free rx buffers
are maintained in linked list, since the received reference
handles can be out of order. However rx descriptors are still
posted sequentially, indexed by producer.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h      |  38 +-
 drivers/net/netxen/netxen_nic_ctx.c  | 710 +++++++++++++++++++++++++++++++++++
 drivers/net/netxen/netxen_nic_init.c | 191 +++++++---
 drivers/net/netxen/netxen_nic_main.c |  15 +-
 4 files changed, 876 insertions(+), 78 deletions(-)
 create mode 100644 drivers/net/netxen/netxen_nic_ctx.c

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index e41f62352b1..705fdf10f95 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -140,6 +140,7 @@
 #define NX_RX_NORMAL_BUF_MAX_LEN       (NX_MAX_ETHERHDR + NX_ETHERMTU)
 #define NX_P2_RX_JUMBO_BUF_MAX_LEN     (NX_MAX_ETHERHDR + P2_MAX_MTU)
 #define NX_P3_RX_JUMBO_BUF_MAX_LEN     (NX_MAX_ETHERHDR + P3_MAX_MTU)
+#define NX_CT_DEFAULT_RX_BUF_LEN	2048
 
 #define MAX_RX_BUFFER_LENGTH		1760
 #define MAX_RX_JUMBO_BUFFER_LENGTH 	8062
@@ -391,8 +392,8 @@ struct rcv_desc {
 };
 
 /* opcode field in status_desc */
-#define RCV_NIC_PKT	(0xA)
-#define STATUS_NIC_PKT	((RCV_NIC_PKT) << 12)
+#define NETXEN_NIC_RXPKT_DESC  0x04
+#define NETXEN_OLD_RXPKT_DESC  0x3f
 
 /* for status field in status_desc */
 #define STATUS_NEED_CKSUM	(1)
@@ -424,6 +425,8 @@ struct rcv_desc {
 	(((sts_data) >> 28) & 0xFFFF)
 #define netxen_get_sts_prot(sts_data)	\
 	(((sts_data) >> 44) & 0x0F)
+#define netxen_get_sts_pkt_offset(sts_data)	\
+	(((sts_data) >> 48) & 0x1F)
 #define netxen_get_sts_opcode(sts_data)	\
 	(((sts_data) >> 58) & 0x03F)
 
@@ -438,17 +441,30 @@ struct rcv_desc {
 
 struct status_desc {
 	/* Bit pattern: 0-3 port, 4-7 status, 8-11 type, 12-27 total_length
-	   28-43 reference_handle, 44-47 protocol, 48-52 unused
+	   28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset
 	   53-55 desc_cnt, 56-57 owner, 58-63 opcode
 	 */
 	__le64 status_desc_data;
-	__le32 hash_value;
-	u8 hash_type;
-	u8 msg_type;
-	u8 unused;
-	/* Bit pattern: 0-6 lro_count indicates frag sequence,
-	   7 last_frag indicates last frag */
-	u8 lro;
+	union {
+		struct {
+			__le32 hash_value;
+			u8 hash_type;
+			u8 msg_type;
+			u8 unused;
+			union {
+				/* Bit pattern: 0-6 lro_count indicates frag
+				 * sequence, 7 last_frag indicates last frag
+				 */
+				u8 lro;
+
+				/* chained buffers */
+				u8 nr_frags;
+			};
+		};
+		struct {
+			__le16 frag_handles[4];
+		};
+	};
 } __attribute__ ((aligned(16)));
 
 enum {
@@ -774,6 +790,7 @@ struct netxen_cmd_buffer {
 
 /* In rx_buffer, we do not need multiple fragments as is a single buffer */
 struct netxen_rx_buffer {
+	struct list_head list;
 	struct sk_buff *skb;
 	u64 dma;
 	u16 ref_handle;
@@ -854,6 +871,7 @@ struct nx_host_rds_ring {
 	u32 dma_size;
 	u32 skb_size;
 	struct netxen_rx_buffer *rx_buf_arr;	/* rx buffers for receive   */
+	struct list_head free_list;
 	int begin_alloc;
 };
 
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
new file mode 100644
index 00000000000..64babc59e69
--- /dev/null
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -0,0 +1,710 @@
+/*
+ * Copyright (C) 2003 - 2008 NetXen, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.
+ *
+ * Contact Information:
+ *    info@netxen.com
+ * NetXen,
+ * 3965 Freedom Circle, Fourth floor,
+ * Santa Clara, CA 95054
+ *
+ */
+
+#include "netxen_nic_hw.h"
+#include "netxen_nic.h"
+#include "netxen_nic_phan_reg.h"
+
+#define NXHAL_VERSION	1
+
+static int
+netxen_api_lock(struct netxen_adapter *adapter)
+{
+	u32 done = 0, timeout = 0;
+
+	for (;;) {
+		/* Acquire PCIE HW semaphore5 */
+		netxen_nic_read_w0(adapter,
+			NETXEN_PCIE_REG(PCIE_SEM5_LOCK), &done);
+
+		if (done == 1)
+			break;
+
+		if (++timeout >= NX_OS_CRB_RETRY_COUNT) {
+			printk(KERN_ERR "%s: lock timeout.\n", __func__);
+			return -1;
+		}
+
+		msleep(1);
+	}
+
+#if 0
+	netxen_nic_write_w1(adapter,
+		NETXEN_API_LOCK_ID, NX_OS_API_LOCK_DRIVER);
+#endif
+	return 0;
+}
+
+static int
+netxen_api_unlock(struct netxen_adapter *adapter)
+{
+	u32 val;
+
+	/* Release PCIE HW semaphore5 */
+	netxen_nic_read_w0(adapter,
+		NETXEN_PCIE_REG(PCIE_SEM5_UNLOCK), &val);
+	return 0;
+}
+
+static u32
+netxen_poll_rsp(struct netxen_adapter *adapter)
+{
+	u32 raw_rsp, rsp = NX_CDRP_RSP_OK;
+	int	timeout = 0;
+
+	do {
+		/* give atleast 1ms for firmware to respond */
+		msleep(1);
+
+		if (++timeout > NX_OS_CRB_RETRY_COUNT)
+			return NX_CDRP_RSP_TIMEOUT;
+
+		netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET,
+				&raw_rsp);
+
+		rsp = le32_to_cpu(raw_rsp);
+	} while (!NX_CDRP_IS_RSP(rsp));
+
+	return rsp;
+}
+
+static u32
+netxen_issue_cmd(struct netxen_adapter *adapter,
+	u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd)
+{
+	u32 rsp;
+	u32 signature = 0;
+	u32 rcode = NX_RCODE_SUCCESS;
+
+	signature = NX_CDRP_SIGNATURE_MAKE(pci_fn, version);
+
+	/* Acquire semaphore before accessing CRB */
+	if (netxen_api_lock(adapter))
+		return NX_RCODE_TIMEOUT;
+
+	netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET,
+			cpu_to_le32(signature));
+
+	netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET,
+			cpu_to_le32(arg1));
+
+	netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET,
+			cpu_to_le32(arg2));
+
+	netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET,
+			cpu_to_le32(arg3));
+
+	netxen_nic_write_w1(adapter, NX_CDRP_CRB_OFFSET,
+			cpu_to_le32(NX_CDRP_FORM_CMD(cmd)));
+
+	rsp = netxen_poll_rsp(adapter);
+
+	if (rsp == NX_CDRP_RSP_TIMEOUT) {
+		printk(KERN_ERR "%s: card response timeout.\n",
+				netxen_nic_driver_name);
+
+		rcode = NX_RCODE_TIMEOUT;
+	} else if (rsp == NX_CDRP_RSP_FAIL) {
+		netxen_nic_read_w1(adapter, NX_ARG1_CRB_OFFSET, &rcode);
+		rcode = le32_to_cpu(rcode);
+
+		printk(KERN_ERR "%s: failed card response code:0x%x\n",
+				netxen_nic_driver_name, rcode);
+	}
+
+	/* Release semaphore */
+	netxen_api_unlock(adapter);
+
+	return rcode;
+}
+
+u32
+nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu)
+{
+	u32 rcode = NX_RCODE_SUCCESS;
+	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx[0];
+
+	if (recv_ctx->state == NX_HOST_CTX_STATE_ACTIVE)
+		rcode = netxen_issue_cmd(adapter,
+				adapter->ahw.pci_func,
+				NXHAL_VERSION,
+				recv_ctx->context_id,
+				mtu,
+				0,
+				NX_CDRP_CMD_SET_MTU);
+
+	return rcode;
+}
+
+static int
+nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
+{
+	void *addr;
+	nx_hostrq_rx_ctx_t *prq;
+	nx_cardrsp_rx_ctx_t *prsp;
+	nx_hostrq_rds_ring_t *prq_rds;
+	nx_hostrq_sds_ring_t *prq_sds;
+	nx_cardrsp_rds_ring_t *prsp_rds;
+	nx_cardrsp_sds_ring_t *prsp_sds;
+	struct nx_host_rds_ring *rds_ring;
+
+	dma_addr_t hostrq_phys_addr, cardrsp_phys_addr;
+	u64 phys_addr;
+
+	int i, nrds_rings, nsds_rings;
+	size_t rq_size, rsp_size;
+	u32 cap, reg;
+
+	int err;
+
+	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx[0];
+
+	/* only one sds ring for now */
+	nrds_rings = adapter->max_rds_rings;
+	nsds_rings = 1;
+
+	rq_size =
+		SIZEOF_HOSTRQ_RX(nx_hostrq_rx_ctx_t, nrds_rings, nsds_rings);
+	rsp_size =
+		SIZEOF_CARDRSP_RX(nx_cardrsp_rx_ctx_t, nrds_rings, nsds_rings);
+
+	addr = pci_alloc_consistent(adapter->pdev,
+				rq_size, &hostrq_phys_addr);
+	if (addr == NULL)
+		return -ENOMEM;
+	prq = (nx_hostrq_rx_ctx_t *)addr;
+
+	addr = pci_alloc_consistent(adapter->pdev,
+			rsp_size, &cardrsp_phys_addr);
+	if (addr == NULL) {
+		err = -ENOMEM;
+		goto out_free_rq;
+	}
+	prsp = (nx_cardrsp_rx_ctx_t *)addr;
+
+	prq->host_rsp_dma_addr = cpu_to_le64(cardrsp_phys_addr);
+
+	cap = (NX_CAP0_LEGACY_CONTEXT | NX_CAP0_LEGACY_MN);
+	cap |= (NX_CAP0_JUMBO_CONTIGUOUS | NX_CAP0_LRO_CONTIGUOUS);
+
+	prq->capabilities[0] = cpu_to_le32(cap);
+	prq->host_int_crb_mode =
+		cpu_to_le32(NX_HOST_INT_CRB_MODE_SHARED);
+	prq->host_rds_crb_mode =
+		cpu_to_le32(NX_HOST_RDS_CRB_MODE_UNIQUE);
+
+	prq->num_rds_rings = cpu_to_le16(nrds_rings);
+	prq->num_sds_rings = cpu_to_le16(nsds_rings);
+	prq->rds_ring_offset = 0;
+	prq->sds_ring_offset = prq->rds_ring_offset +
+		(sizeof(nx_hostrq_rds_ring_t) * nrds_rings);
+
+	prq_rds = (nx_hostrq_rds_ring_t *)(prq->data + prq->rds_ring_offset);
+
+	for (i = 0; i < nrds_rings; i++) {
+
+		rds_ring = &recv_ctx->rds_rings[i];
+
+		prq_rds[i].host_phys_addr = cpu_to_le64(rds_ring->phys_addr);
+		prq_rds[i].ring_size = cpu_to_le32(rds_ring->max_rx_desc_count);
+		prq_rds[i].ring_kind = cpu_to_le32(i);
+		prq_rds[i].buff_size = cpu_to_le64(rds_ring->dma_size);
+	}
+
+	prq_sds = (nx_hostrq_sds_ring_t *)(prq->data + prq->sds_ring_offset);
+
+	prq_sds[0].host_phys_addr =
+		cpu_to_le64(recv_ctx->rcv_status_desc_phys_addr);
+	prq_sds[0].ring_size = cpu_to_le32(adapter->max_rx_desc_count);
+	/* only one msix vector for now */
+	prq_sds[0].msi_index = cpu_to_le32(0);
+
+	/* now byteswap offsets */
+	prq->rds_ring_offset = cpu_to_le32(prq->rds_ring_offset);
+	prq->sds_ring_offset = cpu_to_le32(prq->sds_ring_offset);
+
+	phys_addr = hostrq_phys_addr;
+	err = netxen_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			NXHAL_VERSION,
+			(u32)(phys_addr >> 32),
+			(u32)(phys_addr & 0xffffffff),
+			rq_size,
+			NX_CDRP_CMD_CREATE_RX_CTX);
+	if (err) {
+		printk(KERN_WARNING
+			"Failed to create rx ctx in firmware%d\n", err);
+		goto out_free_rsp;
+	}
+
+
+	prsp_rds = ((nx_cardrsp_rds_ring_t *)
+			 &prsp->data[prsp->rds_ring_offset]);
+
+	for (i = 0; i < le32_to_cpu(prsp->num_rds_rings); i++) {
+		rds_ring = &recv_ctx->rds_rings[i];
+
+		reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
+		rds_ring->crb_rcv_producer = NETXEN_NIC_REG(reg - 0x200);
+	}
+
+	prsp_sds = ((nx_cardrsp_sds_ring_t *)
+			&prsp->data[prsp->sds_ring_offset]);
+	reg = le32_to_cpu(prsp_sds[0].host_consumer_crb);
+	recv_ctx->crb_sts_consumer = NETXEN_NIC_REG(reg - 0x200);
+
+	reg = le32_to_cpu(prsp_sds[0].interrupt_crb);
+	adapter->crb_intr_mask = NETXEN_NIC_REG(reg - 0x200);
+
+	recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
+	recv_ctx->context_id = le16_to_cpu(prsp->context_id);
+	recv_ctx->virt_port = le16_to_cpu(prsp->virt_port);
+
+out_free_rsp:
+	pci_free_consistent(adapter->pdev, rsp_size, prsp, cardrsp_phys_addr);
+out_free_rq:
+	pci_free_consistent(adapter->pdev, rq_size, prq, hostrq_phys_addr);
+	return err;
+}
+
+static void
+nx_fw_cmd_destroy_rx_ctx(struct netxen_adapter *adapter)
+{
+	struct netxen_recv_context *recv_ctx = &adapter->recv_ctx[0];
+
+	if (netxen_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			NXHAL_VERSION,
+			recv_ctx->context_id,
+			NX_DESTROY_CTX_RESET,
+			0,
+			NX_CDRP_CMD_DESTROY_RX_CTX)) {
+
+		printk(KERN_WARNING
+			"%s: Failed to destroy rx ctx in firmware\n",
+			netxen_nic_driver_name);
+	}
+}
+
+static int
+nx_fw_cmd_create_tx_ctx(struct netxen_adapter *adapter)
+{
+	nx_hostrq_tx_ctx_t	*prq;
+	nx_hostrq_cds_ring_t	*prq_cds;
+	nx_cardrsp_tx_ctx_t	*prsp;
+	void	*rq_addr, *rsp_addr;
+	size_t	rq_size, rsp_size;
+	u32	temp;
+	int	err = 0;
+	u64	offset, phys_addr;
+	dma_addr_t	rq_phys_addr, rsp_phys_addr;
+
+	rq_size = SIZEOF_HOSTRQ_TX(nx_hostrq_tx_ctx_t);
+	rq_addr = pci_alloc_consistent(adapter->pdev,
+		rq_size, &rq_phys_addr);
+	if (!rq_addr)
+		return -ENOMEM;
+
+	rsp_size = SIZEOF_CARDRSP_TX(nx_cardrsp_tx_ctx_t);
+	rsp_addr = pci_alloc_consistent(adapter->pdev,
+		rsp_size, &rsp_phys_addr);
+	if (!rsp_addr) {
+		err = -ENOMEM;
+		goto out_free_rq;
+	}
+
+	memset(rq_addr, 0, rq_size);
+	prq = (nx_hostrq_tx_ctx_t *)rq_addr;
+
+	memset(rsp_addr, 0, rsp_size);
+	prsp = (nx_cardrsp_tx_ctx_t *)rsp_addr;
+
+	prq->host_rsp_dma_addr = cpu_to_le64(rsp_phys_addr);
+
+	temp = (NX_CAP0_LEGACY_CONTEXT | NX_CAP0_LEGACY_MN | NX_CAP0_LSO);
+	prq->capabilities[0] = cpu_to_le32(temp);
+
+	prq->host_int_crb_mode =
+		cpu_to_le32(NX_HOST_INT_CRB_MODE_SHARED);
+
+	prq->interrupt_ctl = 0;
+	prq->msi_index = 0;
+
+	prq->dummy_dma_addr = cpu_to_le64(adapter->dummy_dma.phys_addr);
+
+	offset = adapter->ctx_desc_phys_addr+sizeof(struct netxen_ring_ctx);
+	prq->cmd_cons_dma_addr = cpu_to_le64(offset);
+
+	prq_cds = &prq->cds_ring;
+
+	prq_cds->host_phys_addr =
+		cpu_to_le64(adapter->ahw.cmd_desc_phys_addr);
+
+	prq_cds->ring_size = cpu_to_le32(adapter->max_tx_desc_count);
+
+	phys_addr = rq_phys_addr;
+	err = netxen_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			NXHAL_VERSION,
+			(u32)(phys_addr >> 32),
+			((u32)phys_addr & 0xffffffff),
+			rq_size,
+			NX_CDRP_CMD_CREATE_TX_CTX);
+
+	if (err == NX_RCODE_SUCCESS) {
+		temp = le32_to_cpu(prsp->cds_ring.host_producer_crb);
+		adapter->crb_addr_cmd_producer =
+			NETXEN_NIC_REG(temp - 0x200);
+#if 0
+		adapter->tx_state =
+			le32_to_cpu(prsp->host_ctx_state);
+#endif
+		adapter->tx_context_id =
+			le16_to_cpu(prsp->context_id);
+	} else {
+		printk(KERN_WARNING
+			"Failed to create tx ctx in firmware%d\n", err);
+		err = -EIO;
+	}
+
+	pci_free_consistent(adapter->pdev, rsp_size, rsp_addr, rsp_phys_addr);
+
+out_free_rq:
+	pci_free_consistent(adapter->pdev, rq_size, rq_addr, rq_phys_addr);
+
+	return err;
+}
+
+static void
+nx_fw_cmd_destroy_tx_ctx(struct netxen_adapter *adapter)
+{
+	if (netxen_issue_cmd(adapter,
+			adapter->ahw.pci_func,
+			NXHAL_VERSION,
+			adapter->tx_context_id,
+			NX_DESTROY_CTX_RESET,
+			0,
+			NX_CDRP_CMD_DESTROY_TX_CTX)) {
+
+		printk(KERN_WARNING
+			"%s: Failed to destroy tx ctx in firmware\n",
+			netxen_nic_driver_name);
+	}
+}
+
+static u64 ctx_addr_sig_regs[][3] = {
+	{NETXEN_NIC_REG(0x188), NETXEN_NIC_REG(0x18c), NETXEN_NIC_REG(0x1c0)},
+	{NETXEN_NIC_REG(0x190), NETXEN_NIC_REG(0x194), NETXEN_NIC_REG(0x1c4)},
+	{NETXEN_NIC_REG(0x198), NETXEN_NIC_REG(0x19c), NETXEN_NIC_REG(0x1c8)},
+	{NETXEN_NIC_REG(0x1a0), NETXEN_NIC_REG(0x1a4), NETXEN_NIC_REG(0x1cc)}
+};
+
+#define CRB_CTX_ADDR_REG_LO(FUNC_ID)	(ctx_addr_sig_regs[FUNC_ID][0])
+#define CRB_CTX_ADDR_REG_HI(FUNC_ID)	(ctx_addr_sig_regs[FUNC_ID][2])
+#define CRB_CTX_SIGNATURE_REG(FUNC_ID)	(ctx_addr_sig_regs[FUNC_ID][1])
+
+#define lower32(x)	((u32)((x) & 0xffffffff))
+#define upper32(x)	((u32)(((u64)(x) >> 32) & 0xffffffff))
+
+static struct netxen_recv_crb recv_crb_registers[] = {
+	/* Instance 0 */
+	{
+		/* crb_rcv_producer: */
+		{
+			NETXEN_NIC_REG(0x100),
+			/* Jumbo frames */
+			NETXEN_NIC_REG(0x110),
+			/* LRO */
+			NETXEN_NIC_REG(0x120)
+		},
+		/* crb_sts_consumer: */
+		NETXEN_NIC_REG(0x138),
+	},
+	/* Instance 1 */
+	{
+		/* crb_rcv_producer: */
+		{
+			NETXEN_NIC_REG(0x144),
+			/* Jumbo frames */
+			NETXEN_NIC_REG(0x154),
+			/* LRO */
+			NETXEN_NIC_REG(0x164)
+		},
+		/* crb_sts_consumer: */
+		NETXEN_NIC_REG(0x17c),
+	},
+	/* Instance 2 */
+	{
+		/* crb_rcv_producer: */
+		{
+			NETXEN_NIC_REG(0x1d8),
+			/* Jumbo frames */
+			NETXEN_NIC_REG(0x1f8),
+			/* LRO */
+			NETXEN_NIC_REG(0x208)
+		},
+		/* crb_sts_consumer: */
+		NETXEN_NIC_REG(0x220),
+	},
+	/* Instance 3 */
+	{
+		/* crb_rcv_producer: */
+		{
+			NETXEN_NIC_REG(0x22c),
+			/* Jumbo frames */
+			NETXEN_NIC_REG(0x23c),
+			/* LRO */
+			NETXEN_NIC_REG(0x24c)
+		},
+		/* crb_sts_consumer: */
+		NETXEN_NIC_REG(0x264),
+	},
+};
+
+static int
+netxen_init_old_ctx(struct netxen_adapter *adapter)
+{
+	struct netxen_recv_context *recv_ctx;
+	struct nx_host_rds_ring *rds_ring;
+	int ctx, ring;
+	int func_id = adapter->portnum;
+
+	adapter->ctx_desc->cmd_ring_addr =
+		cpu_to_le64(adapter->ahw.cmd_desc_phys_addr);
+	adapter->ctx_desc->cmd_ring_size =
+		cpu_to_le32(adapter->max_tx_desc_count);
+
+	for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
+		recv_ctx = &adapter->recv_ctx[ctx];
+
+		for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+			rds_ring = &recv_ctx->rds_rings[ring];
+
+			adapter->ctx_desc->rcv_ctx[ring].rcv_ring_addr =
+				cpu_to_le64(rds_ring->phys_addr);
+			adapter->ctx_desc->rcv_ctx[ring].rcv_ring_size =
+				cpu_to_le32(rds_ring->max_rx_desc_count);
+		}
+		adapter->ctx_desc->sts_ring_addr =
+			cpu_to_le64(recv_ctx->rcv_status_desc_phys_addr);
+		adapter->ctx_desc->sts_ring_size =
+			cpu_to_le32(adapter->max_rx_desc_count);
+	}
+
+	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_LO(func_id),
+			lower32(adapter->ctx_desc_phys_addr));
+	adapter->pci_write_normalize(adapter, CRB_CTX_ADDR_REG_HI(func_id),
+			upper32(adapter->ctx_desc_phys_addr));
+	adapter->pci_write_normalize(adapter, CRB_CTX_SIGNATURE_REG(func_id),
+			NETXEN_CTX_SIGNATURE | func_id);
+	return 0;
+}
+
+static uint32_t sw_int_mask[4] = {
+	CRB_SW_INT_MASK_0, CRB_SW_INT_MASK_1,
+	CRB_SW_INT_MASK_2, CRB_SW_INT_MASK_3
+};
+
+int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
+{
+	struct netxen_hardware_context *hw = &adapter->ahw;
+	u32 state = 0;
+	void *addr;
+	int err = 0;
+	int ctx, ring;
+	struct netxen_recv_context *recv_ctx;
+	struct nx_host_rds_ring *rds_ring;
+
+	err = netxen_receive_peg_ready(adapter);
+	if (err) {
+		printk(KERN_ERR "Rcv Peg initialization not complete:%x.\n",
+				state);
+		return err;
+	}
+
+	addr = pci_alloc_consistent(adapter->pdev,
+			sizeof(struct netxen_ring_ctx) + sizeof(uint32_t),
+			&adapter->ctx_desc_phys_addr);
+
+	if (addr == NULL) {
+		DPRINTK(ERR, "failed to allocate hw context\n");
+		return -ENOMEM;
+	}
+	memset(addr, 0, sizeof(struct netxen_ring_ctx));
+	adapter->ctx_desc = (struct netxen_ring_ctx *)addr;
+	adapter->ctx_desc->ctx_id = cpu_to_le32(adapter->portnum);
+	adapter->ctx_desc->cmd_consumer_offset =
+		cpu_to_le64(adapter->ctx_desc_phys_addr +
+			sizeof(struct netxen_ring_ctx));
+	adapter->cmd_consumer =
+		(__le32 *)(((char *)addr) + sizeof(struct netxen_ring_ctx));
+
+	/* cmd desc ring */
+	addr = pci_alloc_consistent(adapter->pdev,
+			sizeof(struct cmd_desc_type0) *
+			adapter->max_tx_desc_count,
+			&hw->cmd_desc_phys_addr);
+
+	if (addr == NULL) {
+		printk(KERN_ERR "%s failed to allocate tx desc ring\n",
+				netxen_nic_driver_name);
+		return -ENOMEM;
+	}
+
+	hw->cmd_desc_head = (struct cmd_desc_type0 *)addr;
+
+	for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
+		recv_ctx = &adapter->recv_ctx[ctx];
+
+		for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+			/* rx desc ring */
+			rds_ring = &recv_ctx->rds_rings[ring];
+			addr = pci_alloc_consistent(adapter->pdev,
+					RCV_DESC_RINGSIZE,
+					&rds_ring->phys_addr);
+			if (addr == NULL) {
+				printk(KERN_ERR "%s failed to allocate rx "
+					"desc ring[%d]\n",
+					netxen_nic_driver_name, ring);
+				err = -ENOMEM;
+				goto err_out_free;
+			}
+			rds_ring->desc_head = (struct rcv_desc *)addr;
+
+			if (adapter->fw_major < 4)
+				rds_ring->crb_rcv_producer =
+					recv_crb_registers[adapter->portnum].
+					crb_rcv_producer[ring];
+		}
+
+		/* status desc ring */
+		addr = pci_alloc_consistent(adapter->pdev,
+				STATUS_DESC_RINGSIZE,
+				&recv_ctx->rcv_status_desc_phys_addr);
+		if (addr == NULL) {
+			printk(KERN_ERR "%s failed to allocate sts desc ring\n",
+					netxen_nic_driver_name);
+			err = -ENOMEM;
+			goto err_out_free;
+		}
+		recv_ctx->rcv_status_desc_head = (struct status_desc *)addr;
+
+		if (adapter->fw_major < 4)
+			recv_ctx->crb_sts_consumer =
+				recv_crb_registers[adapter->portnum].
+				crb_sts_consumer;
+	}
+
+	if (adapter->fw_major >= 4) {
+		adapter->intr_scheme = INTR_SCHEME_PERPORT;
+		adapter->msi_mode = MSI_MODE_MULTIFUNC;
+
+		err = nx_fw_cmd_create_rx_ctx(adapter);
+		if (err)
+			goto err_out_free;
+		err = nx_fw_cmd_create_tx_ctx(adapter);
+		if (err)
+			goto err_out_free;
+	} else {
+
+		adapter->intr_scheme = adapter->pci_read_normalize(adapter,
+				CRB_NIC_CAPABILITIES_FW);
+		adapter->msi_mode = adapter->pci_read_normalize(adapter,
+				CRB_NIC_MSI_MODE_FW);
+		adapter->crb_intr_mask = sw_int_mask[adapter->portnum];
+
+		err = netxen_init_old_ctx(adapter);
+		if (err) {
+			netxen_free_hw_resources(adapter);
+			return err;
+		}
+
+	}
+
+	return 0;
+
+err_out_free:
+	netxen_free_hw_resources(adapter);
+	return err;
+}
+
+void netxen_free_hw_resources(struct netxen_adapter *adapter)
+{
+	struct netxen_recv_context *recv_ctx;
+	struct nx_host_rds_ring *rds_ring;
+	int ctx, ring;
+
+	if (adapter->fw_major >= 4) {
+		nx_fw_cmd_destroy_tx_ctx(adapter);
+		nx_fw_cmd_destroy_rx_ctx(adapter);
+	}
+
+	if (adapter->ctx_desc != NULL) {
+		pci_free_consistent(adapter->pdev,
+				sizeof(struct netxen_ring_ctx) +
+				sizeof(uint32_t),
+				adapter->ctx_desc,
+				adapter->ctx_desc_phys_addr);
+		adapter->ctx_desc = NULL;
+	}
+
+	if (adapter->ahw.cmd_desc_head != NULL) {
+		pci_free_consistent(adapter->pdev,
+				sizeof(struct cmd_desc_type0) *
+				adapter->max_tx_desc_count,
+				adapter->ahw.cmd_desc_head,
+				adapter->ahw.cmd_desc_phys_addr);
+		adapter->ahw.cmd_desc_head = NULL;
+	}
+
+	for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
+		recv_ctx = &adapter->recv_ctx[ctx];
+		for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+			rds_ring = &recv_ctx->rds_rings[ring];
+
+			if (rds_ring->desc_head != NULL) {
+				pci_free_consistent(adapter->pdev,
+						RCV_DESC_RINGSIZE,
+						rds_ring->desc_head,
+						rds_ring->phys_addr);
+				rds_ring->desc_head = NULL;
+			}
+		}
+
+		if (recv_ctx->rcv_status_desc_head != NULL) {
+			pci_free_consistent(adapter->pdev,
+					STATUS_DESC_RINGSIZE,
+					recv_ctx->rcv_status_desc_head,
+					recv_ctx->rcv_status_desc_phys_addr);
+			recv_ctx->rcv_status_desc_head = NULL;
+		}
+	}
+}
+
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 7b512405766..01ab31b34a8 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -262,17 +262,30 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 				rds_ring->max_rx_desc_count =
 					adapter->max_rx_desc_count;
 				rds_ring->flags = RCV_DESC_NORMAL;
-				rds_ring->dma_size = RX_DMA_MAP_LEN;
-				rds_ring->skb_size = MAX_RX_BUFFER_LENGTH;
+				if (adapter->ahw.cut_through) {
+					rds_ring->dma_size =
+						NX_CT_DEFAULT_RX_BUF_LEN;
+					rds_ring->skb_size =
+						NX_CT_DEFAULT_RX_BUF_LEN;
+				} else {
+					rds_ring->dma_size = RX_DMA_MAP_LEN;
+					rds_ring->skb_size =
+						MAX_RX_BUFFER_LENGTH;
+				}
 				break;
 
 			case RCV_DESC_JUMBO:
 				rds_ring->max_rx_desc_count =
 					adapter->max_jumbo_rx_desc_count;
 				rds_ring->flags = RCV_DESC_JUMBO;
-				rds_ring->dma_size = RX_JUMBO_DMA_MAP_LEN;
+				if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+					rds_ring->dma_size =
+						NX_P3_RX_JUMBO_BUF_MAX_LEN;
+				else
+					rds_ring->dma_size =
+						NX_P2_RX_JUMBO_BUF_MAX_LEN;
 				rds_ring->skb_size =
-					MAX_RX_JUMBO_BUFFER_LENGTH;
+					rds_ring->dma_size + NET_IP_ALIGN;
 				break;
 
 			case RCV_RING_LRO:
@@ -294,6 +307,7 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 				goto err_out;
 			}
 			memset(rds_ring->rx_buf_arr, 0, RCV_BUFFSIZE);
+			INIT_LIST_HEAD(&rds_ring->free_list);
 			rds_ring->begin_alloc = 0;
 			/*
 			 * Now go through all of them, set reference handles
@@ -302,6 +316,8 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 			num_rx_bufs = rds_ring->max_rx_desc_count;
 			rx_buf = rds_ring->rx_buf_arr;
 			for (i = 0; i < num_rx_bufs; i++) {
+				list_add_tail(&rx_buf->list,
+						&rds_ring->free_list);
 				rx_buf->ref_handle = i;
 				rx_buf->state = NETXEN_BUFFER_FREE;
 				rx_buf++;
@@ -1137,15 +1153,47 @@ int netxen_receive_peg_ready(struct netxen_adapter *adapter)
 	return 0;
 }
 
+static struct sk_buff *netxen_process_rxbuf(struct netxen_adapter *adapter,
+		struct nx_host_rds_ring *rds_ring, u16 index, u16 cksum)
+{
+	struct netxen_rx_buffer *buffer;
+	struct sk_buff *skb;
+
+	buffer = &rds_ring->rx_buf_arr[index];
+
+	pci_unmap_single(adapter->pdev, buffer->dma, rds_ring->dma_size,
+			PCI_DMA_FROMDEVICE);
+
+	skb = buffer->skb;
+	if (!skb)
+		goto no_skb;
+
+	if (likely(adapter->rx_csum && cksum == STATUS_CKSUM_OK)) {
+		adapter->stats.csummed++;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+	} else
+		skb->ip_summed = CHECKSUM_NONE;
+
+	skb->dev = adapter->netdev;
+
+	buffer->skb = NULL;
+
+no_skb:
+	buffer->state = NETXEN_BUFFER_FREE;
+	buffer->lro_current_frags = 0;
+	buffer->lro_expected_frags = 0;
+	list_add_tail(&buffer->list, &rds_ring->free_list);
+	return skb;
+}
+
 /*
  * netxen_process_rcv() send the received packet to the protocol stack.
  * and if the number of receives exceeds RX_BUFFERS_REFILL, then we
  * invoke the routine to send more rx buffers to the Phantom...
  */
 static void netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
-			       struct status_desc *desc)
+		struct status_desc *desc, struct status_desc *frag_desc)
 {
-	struct pci_dev *pdev = adapter->pdev;
 	struct net_device *netdev = adapter->netdev;
 	u64 sts_data = le64_to_cpu(desc->status_desc_data);
 	int index = netxen_get_sts_refhandle(sts_data);
@@ -1154,8 +1202,8 @@ static void netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
 	struct sk_buff *skb;
 	u32 length = netxen_get_sts_totallength(sts_data);
 	u32 desc_ctx;
+	u16 pkt_offset = 0, cksum;
 	struct nx_host_rds_ring *rds_ring;
-	int ret;
 
 	desc_ctx = netxen_get_sts_type(sts_data);
 	if (unlikely(desc_ctx >= NUM_RCV_DESC_RINGS)) {
@@ -1191,41 +1239,52 @@ static void netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
 		}
 	}
 
-	pci_unmap_single(pdev, buffer->dma, rds_ring->dma_size,
-			 PCI_DMA_FROMDEVICE);
-
-	skb = (struct sk_buff *)buffer->skb;
+	cksum = netxen_get_sts_status(sts_data);
 
-	if (likely(adapter->rx_csum &&
-			netxen_get_sts_status(sts_data) == STATUS_CKSUM_OK)) {
-		adapter->stats.csummed++;
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-	} else
-		skb->ip_summed = CHECKSUM_NONE;
+	skb = netxen_process_rxbuf(adapter, rds_ring, index, cksum);
+	if (!skb)
+		return;
 
-	skb->dev = netdev;
 	if (desc_ctx == RCV_DESC_LRO_CTXID) {
 		/* True length was only available on the last pkt */
 		skb_put(skb, buffer->lro_length);
 	} else {
-		skb_put(skb, length);
+		if (length > rds_ring->skb_size)
+			skb_put(skb, rds_ring->skb_size);
+		else
+			skb_put(skb, length);
+
+		pkt_offset = netxen_get_sts_pkt_offset(sts_data);
+		if (pkt_offset)
+			skb_pull(skb, pkt_offset);
 	}
 
 	skb->protocol = eth_type_trans(skb, netdev);
 
-	ret = netif_receive_skb(skb);
-	netdev->last_rx = jiffies;
-
 	/*
-	 * We just consumed one buffer so post a buffer.
+	 * rx buffer chaining is disabled, walk and free
+	 * any spurious rx buffer chain.
 	 */
-	buffer->skb = NULL;
-	buffer->state = NETXEN_BUFFER_FREE;
-	buffer->lro_current_frags = 0;
-	buffer->lro_expected_frags = 0;
+	if (frag_desc) {
+		u16 i, nr_frags = desc->nr_frags;
+
+		dev_kfree_skb_any(skb);
+		for (i = 0; i < nr_frags; i++) {
+			index = frag_desc->frag_handles[i];
+			skb = netxen_process_rxbuf(adapter,
+					rds_ring, index, cksum);
+			if (skb)
+				dev_kfree_skb_any(skb);
+		}
+		adapter->stats.rxdropped++;
+	} else {
 
-	adapter->stats.no_rcv++;
-	adapter->stats.rxbytes += length;
+		netif_receive_skb(skb);
+		netdev->last_rx = jiffies;
+
+		adapter->stats.no_rcv++;
+		adapter->stats.rxbytes += length;
+	}
 }
 
 /* Process Receive status ring */
@@ -1233,9 +1292,11 @@ u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max)
 {
 	struct netxen_recv_context *recv_ctx = &(adapter->recv_ctx[ctxid]);
 	struct status_desc *desc_head = recv_ctx->rcv_status_desc_head;
-	struct status_desc *desc;	/* used to read status desc here */
+	struct status_desc *desc, *frag_desc;
 	u32 consumer = recv_ctx->status_rx_consumer;
 	int count = 0, ring;
+	u64 sts_data;
+	u16 opcode;
 
 	while (count < max) {
 		desc = &desc_head[consumer];
@@ -1244,9 +1305,26 @@ u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max)
 				netxen_get_sts_owner(desc));
 			break;
 		}
-		netxen_process_rcv(adapter, ctxid, desc);
+
+		sts_data = le64_to_cpu(desc->status_desc_data);
+		opcode = netxen_get_sts_opcode(sts_data);
+		frag_desc = NULL;
+		if (opcode == NETXEN_NIC_RXPKT_DESC) {
+			if (desc->nr_frags) {
+				consumer = get_next_index(consumer,
+						adapter->max_rx_desc_count);
+				frag_desc = &desc_head[consumer];
+				netxen_set_sts_owner(frag_desc,
+						STATUS_OWNER_PHANTOM);
+			}
+		}
+
+		netxen_process_rcv(adapter, ctxid, desc, frag_desc);
+
 		netxen_set_sts_owner(desc, STATUS_OWNER_PHANTOM);
-		consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1);
+
+		consumer = get_next_index(consumer,
+				adapter->max_rx_desc_count);
 		count++;
 	}
 	for (ring = 0; ring < adapter->max_rds_rings; ring++)
@@ -1348,36 +1426,31 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 	int index = 0;
 	netxen_ctx_msg msg = 0;
 	dma_addr_t dma;
+	struct list_head *head;
 
 	rds_ring = &recv_ctx->rds_rings[ringid];
 
 	producer = rds_ring->producer;
 	index = rds_ring->begin_alloc;
-	buffer = &rds_ring->rx_buf_arr[index];
+	head = &rds_ring->free_list;
+
 	/* We can start writing rx descriptors into the phantom memory. */
-	while (buffer->state == NETXEN_BUFFER_FREE) {
+	while (!list_empty(head)) {
+
 		skb = dev_alloc_skb(rds_ring->skb_size);
 		if (unlikely(!skb)) {
-			/*
-			 * TODO
-			 * We need to schedule the posting of buffers to the pegs.
-			 */
 			rds_ring->begin_alloc = index;
-			DPRINTK(ERR, "netxen_post_rx_buffers: "
-				" allocated only %d buffers\n", count);
 			break;
 		}
 
+		buffer = list_entry(head->next, struct netxen_rx_buffer, list);
+		list_del(&buffer->list);
+
 		count++;	/* now there should be no failure */
 		pdesc = &rds_ring->desc_head[producer];
 
-#if defined(XGB_DEBUG)
-		*(unsigned long *)(skb->head) = 0xc0debabe;
-		if (skb_is_nonlinear(skb)) {
-			printk("Allocated SKB @%p is nonlinear\n");
-		}
-#endif
-		skb_reserve(skb, 2);
+		if (!adapter->ahw.cut_through)
+			skb_reserve(skb, 2);
 		/* This will be setup when we receive the
 		 * buffer after it has been filled  FSL  TBD TBD
 		 * skb->dev = netdev;
@@ -1395,7 +1468,6 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 		producer =
 		    get_next_index(producer, rds_ring->max_rx_desc_count);
 		index = get_next_index(index, rds_ring->max_rx_desc_count);
-		buffer = &rds_ring->rx_buf_arr[index];
 	}
 	/* if we did allocate buffers, then write the count to Phantom */
 	if (count) {
@@ -1439,32 +1511,29 @@ static void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 	struct netxen_rx_buffer *buffer;
 	int count = 0;
 	int index = 0;
+	struct list_head *head;
 
 	rds_ring = &recv_ctx->rds_rings[ringid];
 
 	producer = rds_ring->producer;
 	index = rds_ring->begin_alloc;
-	buffer = &rds_ring->rx_buf_arr[index];
+	head = &rds_ring->free_list;
 	/* We can start writing rx descriptors into the phantom memory. */
-	while (buffer->state == NETXEN_BUFFER_FREE) {
+	while (!list_empty(head)) {
+
 		skb = dev_alloc_skb(rds_ring->skb_size);
 		if (unlikely(!skb)) {
-			/*
-			 * We need to schedule the posting of buffers to the pegs.
-			 */
 			rds_ring->begin_alloc = index;
-			DPRINTK(ERR, "netxen_post_rx_buffers_nodb: "
-				" allocated only %d buffers\n", count);
 			break;
 		}
+
+		buffer = list_entry(head->next, struct netxen_rx_buffer, list);
+		list_del(&buffer->list);
+
 		count++;	/* now there should be no failure */
 		pdesc = &rds_ring->desc_head[producer];
-		skb_reserve(skb, 2);
-		/*
-		 * This will be setup when we receive the
-		 * buffer after it has been filled
-		 * skb->dev = netdev;
-		 */
+		if (!adapter->ahw.cut_through)
+			skb_reserve(skb, 2);
 		buffer->skb = skb;
 		buffer->state = NETXEN_BUFFER_BUSY;
 		buffer->dma = pci_map_single(pdev, skb->data,
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index df48f89afff..b3c084f0c75 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -844,17 +844,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		/* Handshake with the card before we register the devices. */
 		netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
 
-		if (NX_IS_REVISION_P3(revision_id)) {
-			adapter->hw_read_wx(adapter,
-					NETXEN_MIU_MN_CONTROL, &val, 4);
-			adapter->ahw.cut_through = (val & 0x4) ? 1 : 0;
-			dev_info(&pdev->dev, "firmware running in %s mode\n",
-			adapter->ahw.cut_through ? "cut through" : "legacy");
-		}
 	}	/* first_driver */
 
 	netxen_nic_flash_print(adapter);
 
+	if (NX_IS_REVISION_P3(revision_id)) {
+		adapter->hw_read_wx(adapter,
+				NETXEN_MIU_MN_CONTROL, &val, 4);
+		adapter->ahw.cut_through = (val & 0x4) ? 1 : 0;
+		dev_info(&pdev->dev, "firmware running in %s mode\n",
+		adapter->ahw.cut_through ? "cut through" : "legacy");
+	}
+
 	/*
 	 * See if the firmware gave us a virtual-physical port mapping.
 	 */
-- 
cgit v1.2.3


From cd1f8160e015cd1538701b7de216cbeaefc6b0a8 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:09 -0700
Subject: netxen: enable tso6, intr coalescing.

Enable tso6 and ipv6 checksum, interrupt coalescing for NX3031.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h         |  40 +++++++++++
 drivers/net/netxen/netxen_nic_ethtool.c | 116 +++++++++++++++++++++++++++++++-
 drivers/net/netxen/netxen_nic_hw.c      |  47 +++++++------
 drivers/net/netxen/netxen_nic_main.c    |  38 +++++++++--
 4 files changed, 213 insertions(+), 28 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 705fdf10f95..bcc551ef851 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1133,6 +1133,40 @@ typedef struct nx_mac_list_s {
 	uint8_t mac_addr[MAX_ADDR_LEN];
 } nx_mac_list_t;
 
+/*
+ * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is
+ * adjusted based on configured MTU.
+ */
+#define NETXEN_DEFAULT_INTR_COALESCE_RX_TIME_US	3
+#define NETXEN_DEFAULT_INTR_COALESCE_RX_PACKETS	256
+#define NETXEN_DEFAULT_INTR_COALESCE_TX_PACKETS	64
+#define NETXEN_DEFAULT_INTR_COALESCE_TX_TIME_US	4
+
+#define NETXEN_NIC_INTR_DEFAULT			0x04
+
+typedef union {
+	struct {
+		uint16_t	rx_packets;
+		uint16_t	rx_time_us;
+		uint16_t	tx_packets;
+		uint16_t	tx_time_us;
+	} data;
+	uint64_t		word;
+} nx_nic_intr_coalesce_data_t;
+
+typedef struct {
+	uint16_t			stats_time_us;
+	uint16_t			rate_sample_time;
+	uint16_t			flags;
+	uint16_t			rsvd_1;
+	uint32_t			low_threshold;
+	uint32_t			high_threshold;
+	nx_nic_intr_coalesce_data_t	normal;
+	nx_nic_intr_coalesce_data_t	low;
+	nx_nic_intr_coalesce_data_t	high;
+	nx_nic_intr_coalesce_data_t	irq;
+} nx_nic_intr_coalesce_t;
+
 typedef struct {
 	u64 qhdr;
 	u64 req_hdr;
@@ -1158,6 +1192,10 @@ typedef struct {
 
 #define NETXEN_DB_MAPSIZE_BYTES    	0x1000
 
+#define NETXEN_NETDEV_WEIGHT 120
+#define NETXEN_ADAPTER_UP_MAGIC 777
+#define NETXEN_NIC_PEG_TUNE 0
+
 struct netxen_dummy_dma {
 	void *addr;
 	dma_addr_t phys_addr;
@@ -1236,6 +1274,7 @@ struct netxen_adapter {
 
 	int is_up;
 	struct netxen_dummy_dma dummy_dma;
+	nx_nic_intr_coalesce_t coal;
 
 	/* Context interface shared between card and host */
 	struct netxen_ring_ctx *ctx_desc;
@@ -1423,6 +1462,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter);
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
 void netxen_p2_nic_set_multi(struct net_device *netdev);
 void netxen_p3_nic_set_multi(struct net_device *netdev);
+int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
 
 u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu);
 int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 381d55a5216..48ee06b6f4e 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -752,6 +752,117 @@ static int netxen_nic_set_rx_csum(struct net_device *dev, u32 data)
 	return 0;
 }
 
+static u32 netxen_nic_get_tso(struct net_device *dev)
+{
+	struct netxen_adapter *adapter = netdev_priv(dev);
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return (dev->features & (NETIF_F_TSO | NETIF_F_TSO6)) != 0;
+
+	return (dev->features & NETIF_F_TSO) != 0;
+}
+
+static int netxen_nic_set_tso(struct net_device *dev, u32 data)
+{
+	if (data) {
+		struct netxen_adapter *adapter = netdev_priv(dev);
+
+		dev->features |= NETIF_F_TSO;
+		if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+			dev->features |= NETIF_F_TSO6;
+	} else
+		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+
+	return 0;
+}
+
+/*
+ * Set the coalescing parameters. Currently only normal is supported.
+ * If rx_coalesce_usecs == 0 or rx_max_coalesced_frames == 0 then set the
+ * firmware coalescing to default.
+ */
+static int netxen_set_intr_coalesce(struct net_device *netdev,
+			struct ethtool_coalesce *ethcoal)
+{
+	struct netxen_adapter *adapter = netdev_priv(netdev);
+
+	if (!NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return -EINVAL;
+
+	if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+		return -EINVAL;
+
+	/*
+	* Return Error if unsupported values or
+	* unsupported parameters are set.
+	*/
+	if (ethcoal->rx_coalesce_usecs > 0xffff ||
+		ethcoal->rx_max_coalesced_frames > 0xffff ||
+		ethcoal->tx_coalesce_usecs > 0xffff ||
+		ethcoal->tx_max_coalesced_frames > 0xffff ||
+		ethcoal->rx_coalesce_usecs_irq ||
+		ethcoal->rx_max_coalesced_frames_irq ||
+		ethcoal->tx_coalesce_usecs_irq ||
+		ethcoal->tx_max_coalesced_frames_irq ||
+		ethcoal->stats_block_coalesce_usecs ||
+		ethcoal->use_adaptive_rx_coalesce ||
+		ethcoal->use_adaptive_tx_coalesce ||
+		ethcoal->pkt_rate_low ||
+		ethcoal->rx_coalesce_usecs_low ||
+		ethcoal->rx_max_coalesced_frames_low ||
+		ethcoal->tx_coalesce_usecs_low ||
+		ethcoal->tx_max_coalesced_frames_low ||
+		ethcoal->pkt_rate_high ||
+		ethcoal->rx_coalesce_usecs_high ||
+		ethcoal->rx_max_coalesced_frames_high ||
+		ethcoal->tx_coalesce_usecs_high ||
+		ethcoal->tx_max_coalesced_frames_high)
+		return -EINVAL;
+
+	if (!ethcoal->rx_coalesce_usecs ||
+		!ethcoal->rx_max_coalesced_frames) {
+		adapter->coal.flags = NETXEN_NIC_INTR_DEFAULT;
+		adapter->coal.normal.data.rx_time_us =
+			NETXEN_DEFAULT_INTR_COALESCE_RX_TIME_US;
+		adapter->coal.normal.data.rx_packets =
+			NETXEN_DEFAULT_INTR_COALESCE_RX_PACKETS;
+	} else {
+		adapter->coal.flags = 0;
+		adapter->coal.normal.data.rx_time_us =
+		ethcoal->rx_coalesce_usecs;
+		adapter->coal.normal.data.rx_packets =
+		ethcoal->rx_max_coalesced_frames;
+	}
+	adapter->coal.normal.data.tx_time_us = ethcoal->tx_coalesce_usecs;
+	adapter->coal.normal.data.tx_packets =
+	ethcoal->tx_max_coalesced_frames;
+
+	netxen_config_intr_coalesce(adapter);
+
+	return 0;
+}
+
+static int netxen_get_intr_coalesce(struct net_device *netdev,
+			struct ethtool_coalesce *ethcoal)
+{
+	struct netxen_adapter *adapter = netdev_priv(netdev);
+
+	if (!NX_IS_REVISION_P3(adapter->ahw.revision_id))
+		return -EINVAL;
+
+	if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+		return -EINVAL;
+
+	ethcoal->rx_coalesce_usecs = adapter->coal.normal.data.rx_time_us;
+	ethcoal->tx_coalesce_usecs = adapter->coal.normal.data.tx_time_us;
+	ethcoal->rx_max_coalesced_frames =
+		adapter->coal.normal.data.rx_packets;
+	ethcoal->tx_max_coalesced_frames =
+		adapter->coal.normal.data.tx_packets;
+
+	return 0;
+}
+
 struct ethtool_ops netxen_nic_ethtool_ops = {
 	.get_settings = netxen_nic_get_settings,
 	.set_settings = netxen_nic_set_settings,
@@ -769,11 +880,14 @@ struct ethtool_ops netxen_nic_ethtool_ops = {
 	.set_pauseparam = netxen_nic_set_pauseparam,
 	.set_tx_csum = ethtool_op_set_tx_csum,
 	.set_sg = ethtool_op_set_sg,
-	.set_tso = ethtool_op_set_tso,
+	.get_tso = netxen_nic_get_tso,
+	.set_tso = netxen_nic_set_tso,
 	.self_test = netxen_nic_diag_test,
 	.get_strings = netxen_nic_get_strings,
 	.get_ethtool_stats = netxen_nic_get_ethtool_stats,
 	.get_sset_count = netxen_get_sset_count,
 	.get_rx_csum = netxen_nic_get_rx_csum,
 	.set_rx_csum = netxen_nic_set_rx_csum,
+	.get_coalesce = netxen_get_intr_coalesce,
+	.set_coalesce = netxen_set_intr_coalesce,
 };
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 9d4e9c9dbe0..ed8aa5ab266 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -615,6 +615,33 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 	}
 }
 
+#define	NETXEN_CONFIG_INTR_COALESCE	3
+
+/*
+ * Send the interrupt coalescing parameter set by ethtool to the card.
+ */
+int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
+{
+	nx_nic_req_t req;
+	int rv;
+
+	memset(&req, 0, sizeof(nx_nic_req_t));
+
+	req.qhdr |= (NIC_REQUEST << 23);
+	req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
+	req.req_hdr |= ((u64)adapter->portnum << 16);
+
+	memcpy(&req.words[0], &adapter->coal, sizeof(adapter->coal));
+
+	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
+	if (rv != 0) {
+		printk(KERN_ERR "ERROR. Could not send "
+			"interrupt coalescing parameters\n");
+	}
+
+	return rv;
+}
+
 /*
  * netxen_nic_change_mtu - Change the Maximum Transfer Unit
  * @returns 0 on success, negative on failure
@@ -651,26 +678,6 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
 	return 0;
 }
 
-void netxen_tso_check(struct netxen_adapter *adapter,
-		      struct cmd_desc_type0 *desc, struct sk_buff *skb)
-{
-	if (desc->mss) {
-		desc->total_hdr_length = (sizeof(struct ethhdr) +
-					  ip_hdrlen(skb) + tcp_hdrlen(skb));
-		netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO);
-	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		if (ip_hdr(skb)->protocol == IPPROTO_TCP) {
-			netxen_set_cmd_desc_opcode(desc, TX_TCP_PKT);
-		} else if (ip_hdr(skb)->protocol == IPPROTO_UDP) {
-			netxen_set_cmd_desc_opcode(desc, TX_UDP_PKT);
-		} else {
-			return;
-		}
-	}
-	desc->tcp_hdr_offset = skb_transport_offset(skb);
-	desc->ip_hdr_offset = skb_network_offset(skb);
-}
-
 int netxen_is_flash_supported(struct netxen_adapter *adapter)
 {
 	const int locs[] = { 0, 0x4, 0x100, 0x4000, 0x4128 };
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index b3c084f0c75..91d209a8f6c 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -58,10 +58,6 @@ static int use_msi = 1;
 
 static int use_msi_x = 1;
 
-#define NETXEN_NETDEV_WEIGHT 120
-#define NETXEN_ADAPTER_UP_MAGIC 777
-#define NETXEN_NIC_PEG_TUNE 0
-
 /* Local functions to NetXen NIC driver */
 static int __devinit netxen_nic_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent);
@@ -735,8 +731,10 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->features = NETIF_F_SG;
 	netdev->features |= NETIF_F_IP_CSUM;
 	netdev->features |= NETIF_F_TSO;
-	if (NX_IS_REVISION_P3(revision_id))
+	if (NX_IS_REVISION_P3(revision_id)) {
+		netdev->features |= NETIF_F_IPV6_CSUM;
 		netdev->features |= NETIF_F_TSO6;
+	}
 
 	if (adapter->pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
@@ -1164,6 +1162,31 @@ static int netxen_nic_close(struct net_device *netdev)
 	return 0;
 }
 
+void netxen_tso_check(struct netxen_adapter *adapter,
+		      struct cmd_desc_type0 *desc, struct sk_buff *skb)
+{
+	if (desc->mss) {
+		desc->total_hdr_length = (sizeof(struct ethhdr) +
+					  ip_hdrlen(skb) + tcp_hdrlen(skb));
+
+		if ((NX_IS_REVISION_P3(adapter->ahw.revision_id)) &&
+				(skb->protocol == htons(ETH_P_IPV6)))
+			netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO6);
+		else
+			netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO);
+
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+			netxen_set_cmd_desc_opcode(desc, TX_TCP_PKT);
+		else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
+			netxen_set_cmd_desc_opcode(desc, TX_UDP_PKT);
+		else
+			return;
+	}
+	desc->tcp_hdr_offset = skb_transport_offset(skb);
+	desc->ip_hdr_offset = skb_network_offset(skb);
+}
+
 static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
@@ -1185,7 +1208,7 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	/* There 4 fragments per descriptor */
 	no_of_desc = (frag_count + 3) >> 2;
-	if (netdev->features & NETIF_F_TSO) {
+	if (netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) {
 		if (skb_shinfo(skb)->gso_size > 0) {
 
 			no_of_desc++;
@@ -1212,7 +1235,8 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
 	/* Take skb->data itself */
 	pbuf = &adapter->cmd_buf_arr[producer];
-	if ((netdev->features & NETIF_F_TSO) && skb_shinfo(skb)->gso_size > 0) {
+	if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
+			skb_shinfo(skb)->gso_size > 0) {
 		pbuf->mss = skb_shinfo(skb)->gso_size;
 		hwdesc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
 	} else {
-- 
cgit v1.2.3


From 58735567b6de3034c9d0d7e1dcf31614b66de986 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Mon, 21 Jul 2008 19:44:10 -0700
Subject: netxen: update driver version

Change driver version to 4.0.0. Netxen firmwares as old as
v3.4.216 are supported.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h    | 10 ++++++----
 drivers/net/netxen/netxen_nic_hw.c | 14 +++++---------
 2 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index bcc551ef851..ac710c30d3f 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -63,10 +63,12 @@
 
 #include "netxen_nic_hw.h"
 
-#define _NETXEN_NIC_LINUX_MAJOR 3
-#define _NETXEN_NIC_LINUX_MINOR 4
-#define _NETXEN_NIC_LINUX_SUBVERSION 18
-#define NETXEN_NIC_LINUX_VERSIONID  "3.4.18"
+#define _NETXEN_NIC_LINUX_MAJOR 4
+#define _NETXEN_NIC_LINUX_MINOR 0
+#define _NETXEN_NIC_LINUX_SUBVERSION 0
+#define NETXEN_NIC_LINUX_VERSIONID  "4.0.0"
+
+#define NETXEN_VERSION_CODE(a, b, c)	(((a) << 16) + ((b) << 8) + (c))
 
 #define NETXEN_NUM_FLASH_SECTORS (64)
 #define NETXEN_FLASH_SECTOR_SIZE (64 * 1024)
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index ed8aa5ab266..96a3bc6426e 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -2168,16 +2168,12 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
 				fw_minor, fw_build);
 	}
 
-	if (fw_major != _NETXEN_NIC_LINUX_MAJOR) {
+	if (NETXEN_VERSION_CODE(fw_major, fw_minor, fw_build) <
+			NETXEN_VERSION_CODE(3, 4, 216)) {
 		adapter->driver_mismatch = 1;
-	}
-	if (fw_minor != _NETXEN_NIC_LINUX_MINOR &&
-			fw_minor != (_NETXEN_NIC_LINUX_MINOR + 1)) {
-		adapter->driver_mismatch = 1;
-	}
-	if (adapter->driver_mismatch) {
-		printk(KERN_ERR "%s: driver and firmware version mismatch\n",
-				adapter->netdev->name);
+		printk(KERN_ERR "%s: firmware version %d.%d.%d unsupported\n",
+				netxen_nic_driver_name,
+				fw_major, fw_minor, fw_build);
 		return;
 	}
 }
-- 
cgit v1.2.3


From b805da74dee3a8de8a29654078c5198f2fb0e15b Mon Sep 17 00:00:00 2001
From: Andy Richter <richtera@us.ibm.com>
Date: Fri, 18 Jul 2008 15:24:56 +0200
Subject: s390/net: Cleanup claw printk messages.

Cc: Martin Schwidefsky <schwidefska@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andy Richter <richtera@us.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/claw.c | 2141 ++++++++++++-----------------------------------
 1 file changed, 520 insertions(+), 1621 deletions(-)

diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index c644669a75c..a08b1682c8e 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -58,13 +58,13 @@
  *    1.10  Changes for Buffer allocation
  *    1.15  Changed for 2.6 Kernel  No longer compiles on 2.4 or lower
  *    1.25  Added Packing support
+ *    1.5
  */
 #include <asm/ccwdev.h>
 #include <asm/ccwgroup.h>
 #include <asm/debug.h>
 #include <asm/idals.h>
 #include <asm/io.h>
-
 #include <linux/bitops.h>
 #include <linux/ctype.h>
 #include <linux/delay.h>
@@ -90,36 +90,10 @@
 #include "cu3088.h"
 #include "claw.h"
 
-MODULE_AUTHOR("Andy Richter <richtera@us.ibm.com>");
-MODULE_DESCRIPTION("Linux for zSeries CLAW Driver\n" \
-			"Copyright 2000,2005 IBM Corporation\n");
-MODULE_LICENSE("GPL");
-
-/* Debugging is based on DEBUGMSG, IOTRACE, or FUNCTRACE  options:
-   DEBUGMSG  - Enables output of various debug messages in the code
-   IOTRACE   - Enables output of CCW and other IO related traces
-   FUNCTRACE - Enables output of function entry/exit trace
-   Define any combination of above options to enable tracing
-
-   CLAW also uses the s390dbf file system  see claw_trace and claw_setup
+/*
+   CLAW uses the s390dbf file system  see claw_trace and claw_setup
 */
 
-/* following enables tracing */
-//#define DEBUGMSG
-//#define IOTRACE
-//#define FUNCTRACE
-
-#ifdef DEBUGMSG
-#define DEBUG
-#endif
-
-#ifdef IOTRACE
-#define DEBUG
-#endif
-
-#ifdef FUNCTRACE
-#define DEBUG
-#endif
 
 static char debug_buffer[255];
 /**
@@ -146,7 +120,6 @@ claw_register_debug_facility(void)
 	claw_dbf_setup = debug_register("claw_setup", 2, 1, 8);
 	claw_dbf_trace = debug_register("claw_trace", 2, 2, 8);
 	if (claw_dbf_setup == NULL || claw_dbf_trace == NULL) {
-		printk(KERN_WARNING "Not enough memory for debug facility.\n");
 		claw_unregister_debug_facility();
 		return -ENOMEM;
 	}
@@ -232,9 +205,6 @@ static void probe_error( struct ccwgroup_device *cgdev);
 static struct net_device_stats *claw_stats(struct net_device *dev);
 static int pages_to_order_of_mag(int num_of_pages);
 static struct sk_buff *claw_pack_skb(struct claw_privbk *privptr);
-#ifdef DEBUG
-static void dumpit (char *buf, int len);
-#endif
 /* sysfs Functions */
 static ssize_t claw_hname_show(struct device *dev, struct device_attribute *attr, char *buf);
 static ssize_t claw_hname_write(struct device *dev, struct device_attribute *attr,
@@ -263,12 +233,12 @@ static int claw_snd_disc(struct net_device *dev, struct clawctl * p_ctl);
 static int claw_snd_sys_validate_rsp(struct net_device *dev,
         struct clawctl * p_ctl, __u32 return_code);
 static int claw_strt_conn_req(struct net_device *dev );
-static void claw_strt_read ( struct net_device *dev, int lock );
-static void claw_strt_out_IO( struct net_device *dev );
-static void claw_free_wrt_buf( struct net_device *dev );
+static void claw_strt_read(struct net_device *dev, int lock);
+static void claw_strt_out_IO(struct net_device *dev);
+static void claw_free_wrt_buf(struct net_device *dev);
 
 /* Functions for unpack reads   */
-static void unpack_read (struct net_device *dev );
+static void unpack_read(struct net_device *dev);
 
 /* ccwgroup table  */
 
@@ -284,7 +254,6 @@ static struct ccwgroup_driver claw_group_driver = {
 };
 
 /*
-*
 *       Key functions
 */
 
@@ -298,23 +267,14 @@ claw_probe(struct ccwgroup_device *cgdev)
 	int  		rc;
 	struct claw_privbk *privptr=NULL;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s Enter\n",__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"probe");
+	CLAW_DBF_TEXT(2, setup, "probe");
 	if (!get_device(&cgdev->dev))
 		return -ENODEV;
-#ifdef DEBUGMSG
-        printk(KERN_INFO "claw: variable cgdev =\n");
-        dumpit((char *)cgdev, sizeof(struct ccwgroup_device));
-#endif
 	privptr = kzalloc(sizeof(struct claw_privbk), GFP_KERNEL);
 	if (privptr == NULL) {
 		probe_error(cgdev);
 		put_device(&cgdev->dev);
-		printk(KERN_WARNING "Out of memory %s %s Exit Line %d \n",
-			cgdev->cdev[0]->dev.bus_id,__func__,__LINE__);
-		CLAW_DBF_TEXT_(2,setup,"probex%d",-ENOMEM);
+		CLAW_DBF_TEXT_(2, setup, "probex%d", -ENOMEM);
 		return -ENOMEM;
 	}
 	privptr->p_mtc_envelope= kzalloc( MAX_ENVELOPE_SIZE, GFP_KERNEL);
@@ -322,9 +282,7 @@ claw_probe(struct ccwgroup_device *cgdev)
         if ((privptr->p_mtc_envelope==NULL) || (privptr->p_env==NULL)) {
                 probe_error(cgdev);
 		put_device(&cgdev->dev);
-		printk(KERN_WARNING "Out of memory %s %s Exit Line %d \n",
-			cgdev->cdev[0]->dev.bus_id,__func__,__LINE__);
-		CLAW_DBF_TEXT_(2,setup,"probex%d",-ENOMEM);
+		CLAW_DBF_TEXT_(2, setup, "probex%d", -ENOMEM);
                 return -ENOMEM;
         }
 	memcpy(privptr->p_env->adapter_name,WS_NAME_NOT_DEF,8);
@@ -341,19 +299,14 @@ claw_probe(struct ccwgroup_device *cgdev)
 		put_device(&cgdev->dev);
 		printk(KERN_WARNING "add_files failed %s %s Exit Line %d \n",
 			cgdev->cdev[0]->dev.bus_id,__func__,__LINE__);
-		CLAW_DBF_TEXT_(2,setup,"probex%d",rc);
+		CLAW_DBF_TEXT_(2, setup, "probex%d", rc);
 		return rc;
 	}
-	printk(KERN_INFO "claw: sysfs files added for %s\n",cgdev->cdev[0]->dev.bus_id);
 	privptr->p_env->p_priv = privptr;
         cgdev->cdev[0]->handler = claw_irq_handler;
 	cgdev->cdev[1]->handler = claw_irq_handler;
 	cgdev->dev.driver_data = privptr;
-#ifdef FUNCTRACE
-        printk(KERN_INFO "claw:%s exit on line %d, "
-		"rc = 0\n",__func__,__LINE__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"prbext 0");
+	CLAW_DBF_TEXT(2, setup, "prbext 0");
 
         return 0;
 }  /*  end of claw_probe       */
@@ -370,37 +323,18 @@ claw_tx(struct sk_buff *skb, struct net_device *dev)
 	unsigned long saveflags;
         struct chbk *p_ch;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s enter\n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"claw_tx");
+	CLAW_DBF_TEXT(4, trace, "claw_tx");
         p_ch=&privptr->channel[WRITE];
         if (skb == NULL) {
-                printk(KERN_WARNING "%s: null pointer passed as sk_buffer\n",
-			dev->name);
                 privptr->stats.tx_dropped++;
-#ifdef FUNCTRACE
-                printk(KERN_INFO "%s: %s() exit on line %d, rc = EIO\n",
-			dev->name,__func__, __LINE__);
-#endif
-		CLAW_DBF_TEXT_(2,trace,"clawtx%d",-EIO);
+		privptr->stats.tx_errors++;
+		CLAW_DBF_TEXT_(2, trace, "clawtx%d", -EIO);
                 return -EIO;
         }
-
-#ifdef IOTRACE
-        printk(KERN_INFO "%s: variable sk_buff=\n",dev->name);
-        dumpit((char *) skb, sizeof(struct sk_buff));
-        printk(KERN_INFO "%s: variable dev=\n",dev->name);
-        dumpit((char *) dev, sizeof(struct net_device));
-#endif
         spin_lock_irqsave(get_ccwdev_lock(p_ch->cdev), saveflags);
         rc=claw_hw_tx( skb, dev, 1 );
         spin_unlock_irqrestore(get_ccwdev_lock(p_ch->cdev), saveflags);
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s exit on line %d, rc = %d\n",
-		dev->name, __func__, __LINE__, rc);
-#endif
-	CLAW_DBF_TEXT_(4,trace,"clawtx%d",rc);
+	CLAW_DBF_TEXT_(4, trace, "clawtx%d", rc);
         return rc;
 }   /*  end of claw_tx */
 
@@ -419,7 +353,7 @@ claw_pack_skb(struct claw_privbk *privptr)
 
 	new_skb = NULL;		/* assume no dice */
 	pkt_cnt = 0;
-	CLAW_DBF_TEXT(4,trace,"PackSKBe");
+	CLAW_DBF_TEXT(4, trace, "PackSKBe");
 	if (!skb_queue_empty(&p_ch->collect_queue)) {
 	/* some data */
 		held_skb = skb_dequeue(&p_ch->collect_queue);
@@ -457,13 +391,8 @@ claw_pack_skb(struct claw_privbk *privptr)
 				skb_queue_head(&p_ch->collect_queue,held_skb);
 			}
 		}
-#ifdef IOTRACE
-		printk(KERN_INFO "%s: %s() Packed %d len %d\n",
-			p_env->ndev->name,
-			__func__,pkt_cnt,new_skb->len);
-#endif
 	}
-	CLAW_DBF_TEXT(4,trace,"PackSKBx");
+	CLAW_DBF_TEXT(4, trace, "PackSKBx");
 	return new_skb;
 }
 
@@ -477,29 +406,12 @@ claw_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct claw_privbk  *privptr=dev->priv;
 	int buff_size;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter  \n",dev->name,__func__);
-#endif
-#ifdef DEBUGMSG
-        printk(KERN_INFO "variable dev =\n");
-        dumpit((char *) dev, sizeof(struct net_device));
-        printk(KERN_INFO "variable new_mtu = %d\n", new_mtu);
-#endif
-	CLAW_DBF_TEXT(4,trace,"setmtu");
+	CLAW_DBF_TEXT(4, trace, "setmtu");
 	buff_size = privptr->p_env->write_size;
         if ((new_mtu < 60) || (new_mtu > buff_size)) {
-#ifdef FUNCTRACE
-                printk(KERN_INFO "%s:%s Exit on line %d, rc=EINVAL\n",
-		dev->name,
-		__func__, __LINE__);
-#endif
                 return -EINVAL;
         }
         dev->mtu = new_mtu;
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d\n",dev->name,
-	__func__, __LINE__);
-#endif
         return 0;
 }  /*   end of claw_change_mtu */
 
@@ -521,24 +433,13 @@ claw_open(struct net_device *dev)
         struct timer_list  timer;
         struct ccwbk *p_buf;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter  \n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"open");
-	if (!dev || (dev->name[0] == 0x00)) {
-		CLAW_DBF_TEXT(2,trace,"BadDev");
-	 	printk(KERN_WARNING "claw: Bad device at open failing \n");
-		return -ENODEV;
-	}
+	CLAW_DBF_TEXT(4, trace, "open");
 	privptr = (struct claw_privbk *)dev->priv;
         /*   allocate and initialize CCW blocks */
 	if (privptr->buffs_alloc == 0) {
 	        rc=init_ccw_bk(dev);
         	if (rc) {
-                	printk(KERN_INFO "%s:%s Exit on line %d, rc=ENOMEM\n",
-			dev->name,
-			__func__, __LINE__);
-			CLAW_DBF_TEXT(2,trace,"openmem");
+			CLAW_DBF_TEXT(2, trace, "openmem");
                 	return -ENOMEM;
         	}
 	}
@@ -557,7 +458,7 @@ claw_open(struct net_device *dev)
 	tasklet_init(&privptr->channel[READ].tasklet, claw_irq_tasklet,
         	(unsigned long) &privptr->channel[READ]);
         for ( i = 0; i < 2;  i++) {
-		CLAW_DBF_TEXT_(2,trace,"opn_ch%d",i);
+		CLAW_DBF_TEXT_(2, trace, "opn_ch%d", i);
                 init_waitqueue_head(&privptr->channel[i].wait);
 		/* skb_queue_head_init(&p_ch->io_queue); */
 		if (i == WRITE)
@@ -595,15 +496,8 @@ claw_open(struct net_device *dev)
            ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END)) != 0x00) ||
            (((privptr->channel[READ].flag |
 	   	privptr->channel[WRITE].flag) & CLAW_TIMER) != 0x00)) {
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s: channel problems during open - read:"
-			" %02x -  write: %02x\n",
-                        dev->name,
-			privptr->channel[READ].last_dstat,
-			privptr->channel[WRITE].last_dstat);
-#endif
                 printk(KERN_INFO "%s: remote side is not ready\n", dev->name);
-		CLAW_DBF_TEXT(2,trace,"notrdy");
+		CLAW_DBF_TEXT(2, trace, "notrdy");
 
                 for ( i = 0; i < 2;  i++) {
                         spin_lock_irqsave(
@@ -659,23 +553,14 @@ claw_open(struct net_device *dev)
                 privptr->p_buff_read=NULL;
                 privptr->p_buff_write=NULL;
                 claw_clear_busy(dev);
-#ifdef FUNCTRACE
-                printk(KERN_INFO "%s:%s Exit on line %d, rc=EIO\n",
-		dev->name,__func__,__LINE__);
-#endif
-		CLAW_DBF_TEXT(2,trace,"open EIO");
+		CLAW_DBF_TEXT(2, trace, "open EIO");
                 return -EIO;
         }
 
         /*   Send SystemValidate command */
 
         claw_clear_busy(dev);
-
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d, rc=0\n",
-		dev->name,__func__,__LINE__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"openok");
+	CLAW_DBF_TEXT(4, trace, "openok");
         return 0;
 }    /*     end of claw_open    */
 
@@ -694,22 +579,14 @@ claw_irq_handler(struct ccw_device *cdev,
         struct claw_env  *p_env;
         struct chbk *p_ch_r=NULL;
 
-
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s enter  \n",__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"clawirq");
+	CLAW_DBF_TEXT(4, trace, "clawirq");
         /* Bypass all 'unsolicited interrupts' */
 	if (!cdev->dev.driver_data) {
                 printk(KERN_WARNING "claw: unsolicited interrupt for device:"
 		 	"%s received c-%02x d-%02x\n",
 		       cdev->dev.bus_id, irb->scsw.cmd.cstat,
 		       irb->scsw.cmd.dstat);
-#ifdef FUNCTRACE
-                printk(KERN_INFO "claw: %s() "
-			"exit on line %d\n",__func__,__LINE__);
-#endif
-		CLAW_DBF_TEXT(2,trace,"badirq");
+		CLAW_DBF_TEXT(2, trace, "badirq");
                 return;
         }
 	privptr = (struct claw_privbk *)cdev->dev.driver_data;
@@ -722,41 +599,25 @@ claw_irq_handler(struct ccw_device *cdev,
 	else {
 		printk(KERN_WARNING "claw: Can't determine channel for "
 			"interrupt, device %s\n", cdev->dev.bus_id);
-		CLAW_DBF_TEXT(2,trace,"badchan");
+		CLAW_DBF_TEXT(2, trace, "badchan");
 		return;
 	}
-	CLAW_DBF_TEXT_(4,trace,"IRQCH=%d",p_ch->flag);
+	CLAW_DBF_TEXT_(4, trace, "IRQCH=%d", p_ch->flag);
 
 	dev = (struct net_device *) (p_ch->ndev);
         p_env=privptr->p_env;
 
-#ifdef IOTRACE
-        printk(KERN_INFO "%s: interrupt for device: %04x "
-		"received c-%02x d-%02x state-%02x\n",
-	       dev->name, p_ch->devno, irb->scsw.cmd.cstat,
-	       irb->scsw.cmd.dstat, p_ch->claw_state);
-#endif
-
 	/* Copy interruption response block. */
 	memcpy(p_ch->irb, irb, sizeof(struct irb));
 
-        /* Check for good subchannel return code, otherwise error message */
+	/* Check for good subchannel return code, otherwise info message */
 	if (irb->scsw.cmd.cstat && !(irb->scsw.cmd.cstat & SCHN_STAT_PCI)) {
                 printk(KERN_INFO "%s: subchannel check for device: %04x -"
 			" Sch Stat %02x  Dev Stat %02x CPA - %04x\n",
                         dev->name, p_ch->devno,
 			irb->scsw.cmd.cstat, irb->scsw.cmd.dstat,
 			irb->scsw.cmd.cpa);
-#ifdef IOTRACE
-		dumpit((char *)irb,sizeof(struct irb));
-		dumpit((char *)(unsigned long)irb->scsw.cmd.cpa,
-			sizeof(struct ccw1));
-#endif
-#ifdef FUNCTRACE
-		printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
-		CLAW_DBF_TEXT(2,trace,"chanchk");
+		CLAW_DBF_TEXT(2, trace, "chanchk");
                 /* return; */
         }
 
@@ -768,233 +629,138 @@ claw_irq_handler(struct ccw_device *cdev,
 	p_ch->last_dstat = irb->scsw.cmd.dstat;
 
         switch (p_ch->claw_state) {
-                case CLAW_STOP:/* HALT_IO by claw_release (halt sequence) */
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s: CLAW_STOP enter\n", dev->name);
-#endif
-			if (!((p_ch->irb->scsw.cmd.stctl &
-			       SCSW_STCTL_SEC_STATUS) ||
-			    (p_ch->irb->scsw.cmd.stctl ==
-				SCSW_STCTL_STATUS_PEND) ||
-			    (p_ch->irb->scsw.cmd.stctl ==
-				(SCSW_STCTL_ALERT_STATUS |
-				 SCSW_STCTL_STATUS_PEND)))) {
-#ifdef FUNCTRACE
-                                printk(KERN_INFO "%s:%s Exit on line %d\n",
-					dev->name,__func__,__LINE__);
-#endif
-                                return;
-                        }
-                        wake_up(&p_ch->wait);   /* wake up claw_release */
-
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s: CLAW_STOP exit\n", dev->name);
-#endif
-#ifdef FUNCTRACE
-                        printk(KERN_INFO "%s:%s Exit on line %d\n",
-				dev->name,__func__,__LINE__);
-#endif
-			CLAW_DBF_TEXT(4,trace,"stop");
-                        return;
-
-                case CLAW_START_HALT_IO: /* HALT_IO issued by claw_open  */
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s: process CLAW_STAT_HALT_IO\n",
-				dev->name);
-#endif
-			if (!((p_ch->irb->scsw.cmd.stctl &
-			       SCSW_STCTL_SEC_STATUS) ||
-			    (p_ch->irb->scsw.cmd.stctl ==
-			     SCSW_STCTL_STATUS_PEND) ||
-			    (p_ch->irb->scsw.cmd.stctl ==
-			     (SCSW_STCTL_ALERT_STATUS |
-			      SCSW_STCTL_STATUS_PEND)))) {
-#ifdef FUNCTRACE
-				printk(KERN_INFO "%s:%s Exit on line %d\n",
-					dev->name,__func__,__LINE__);
-#endif
-				CLAW_DBF_TEXT(4,trace,"haltio");
-                                return;
-                        }
-                        if (p_ch->flag == CLAW_READ) {
-                                p_ch->claw_state = CLAW_START_READ;
-                                wake_up(&p_ch->wait); /* wake claw_open (READ)*/
-                        }
+	case CLAW_STOP:/* HALT_IO by claw_release (halt sequence) */
+		if (!((p_ch->irb->scsw.cmd.stctl & SCSW_STCTL_SEC_STATUS) ||
+		(p_ch->irb->scsw.cmd.stctl == SCSW_STCTL_STATUS_PEND) ||
+		(p_ch->irb->scsw.cmd.stctl ==
+		(SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND))))
+			return;
+		wake_up(&p_ch->wait);   /* wake up claw_release */
+		CLAW_DBF_TEXT(4, trace, "stop");
+		return;
+	case CLAW_START_HALT_IO: /* HALT_IO issued by claw_open  */
+		if (!((p_ch->irb->scsw.cmd.stctl & SCSW_STCTL_SEC_STATUS) ||
+		(p_ch->irb->scsw.cmd.stctl == SCSW_STCTL_STATUS_PEND) ||
+		(p_ch->irb->scsw.cmd.stctl ==
+		(SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)))) {
+			CLAW_DBF_TEXT(4, trace, "haltio");
+			return;
+		}
+		if (p_ch->flag == CLAW_READ) {
+			p_ch->claw_state = CLAW_START_READ;
+			wake_up(&p_ch->wait); /* wake claw_open (READ)*/
+		} else if (p_ch->flag == CLAW_WRITE) {
+			p_ch->claw_state = CLAW_START_WRITE;
+			/*	send SYSTEM_VALIDATE			*/
+			claw_strt_read(dev, LOCK_NO);
+			claw_send_control(dev,
+				SYSTEM_VALIDATE_REQUEST,
+				0, 0, 0,
+				p_env->host_name,
+				p_env->adapter_name);
+		} else {
+			printk(KERN_WARNING "claw: unsolicited "
+				"interrupt for device:"
+				"%s received c-%02x d-%02x\n",
+				cdev->dev.bus_id,
+				irb->scsw.cmd.cstat,
+				irb->scsw.cmd.dstat);
+			return;
+			}
+		CLAW_DBF_TEXT(4, trace, "haltio");
+		return;
+	case CLAW_START_READ:
+		CLAW_DBF_TEXT(4, trace, "ReadIRQ");
+		if (p_ch->irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) {
+			clear_bit(0, (void *)&p_ch->IO_active);
+			if ((p_ch->irb->ecw[0] & 0x41) == 0x41 ||
+			    (p_ch->irb->ecw[0] & 0x40) == 0x40 ||
+			    (p_ch->irb->ecw[0])        == 0) {
+				privptr->stats.rx_errors++;
+				printk(KERN_INFO "%s: Restart is "
+					"required after remote "
+					"side recovers \n",
+					dev->name);
+			}
+			CLAW_DBF_TEXT(4, trace, "notrdy");
+			return;
+		}
+		if ((p_ch->irb->scsw.cmd.cstat & SCHN_STAT_PCI) &&
+			(p_ch->irb->scsw.cmd.dstat == 0)) {
+			if (test_and_set_bit(CLAW_BH_ACTIVE,
+				(void *)&p_ch->flag_a) == 0)
+				tasklet_schedule(&p_ch->tasklet);
 			else
-			   if (p_ch->flag == CLAW_WRITE) {
-                                p_ch->claw_state = CLAW_START_WRITE;
-                                /*      send SYSTEM_VALIDATE                    */
-                                claw_strt_read(dev, LOCK_NO);
-                               	claw_send_control(dev,
-					SYSTEM_VALIDATE_REQUEST,
-					0, 0, 0,
-					p_env->host_name,
-					p_env->adapter_name );
-                        } else {
-				printk(KERN_WARNING "claw: unsolicited "
-					"interrupt for device:"
-				 	"%s received c-%02x d-%02x\n",
-                		        cdev->dev.bus_id,
-					irb->scsw.cmd.cstat,
-					irb->scsw.cmd.dstat);
-				return;
-				}
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s: process CLAW_STAT_HALT_IO exit\n",
-				dev->name);
-#endif
-#ifdef FUNCTRACE
-                        printk(KERN_INFO "%s:%s Exit on line %d\n",
-				dev->name,__func__,__LINE__);
-#endif
-			CLAW_DBF_TEXT(4,trace,"haltio");
-                        return;
-                case CLAW_START_READ:
-			CLAW_DBF_TEXT(4,trace,"ReadIRQ");
-			if (p_ch->irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) {
-                                clear_bit(0, (void *)&p_ch->IO_active);
-                                if ((p_ch->irb->ecw[0] & 0x41) == 0x41 ||
-                                    (p_ch->irb->ecw[0] & 0x40) == 0x40 ||
-                                    (p_ch->irb->ecw[0])        == 0)
-                                {
-                                        privptr->stats.rx_errors++;
-                                        printk(KERN_INFO "%s: Restart is "
-						"required after remote "
-						"side recovers \n",
-						dev->name);
-                                }
-#ifdef FUNCTRACE
-				printk(KERN_INFO "%s:%s Exit on line %d\n",
-					dev->name,__func__,__LINE__);
-#endif
-					CLAW_DBF_TEXT(4,trace,"notrdy");
-                                        return;
-                        }
-			if ((p_ch->irb->scsw.cmd.cstat & SCHN_STAT_PCI) &&
-			    (p_ch->irb->scsw.cmd.dstat == 0)) {
-                                if (test_and_set_bit(CLAW_BH_ACTIVE,
-					(void *)&p_ch->flag_a) == 0) {
-					tasklet_schedule(&p_ch->tasklet);
-                                }
-				else {
-					CLAW_DBF_TEXT(4,trace,"PCINoBH");
-				}
-#ifdef FUNCTRACE
-				printk(KERN_INFO "%s:%s Exit on line %d\n",
-					dev->name,__func__,__LINE__);
-#endif
-				CLAW_DBF_TEXT(4,trace,"PCI_read");
-                                return;
-                        }
-			if (!((p_ch->irb->scsw.cmd.stctl &
-			       SCSW_STCTL_SEC_STATUS) ||
-			     (p_ch->irb->scsw.cmd.stctl ==
-			      SCSW_STCTL_STATUS_PEND) ||
-			     (p_ch->irb->scsw.cmd.stctl ==
-			      (SCSW_STCTL_ALERT_STATUS |
-			       SCSW_STCTL_STATUS_PEND)))) {
-#ifdef FUNCTRACE
-				printk(KERN_INFO "%s:%s Exit on line %d\n",
-					dev->name,__func__,__LINE__);
-#endif
-				CLAW_DBF_TEXT(4,trace,"SPend_rd");
-                                return;
-                        }
-                        clear_bit(0, (void *)&p_ch->IO_active);
-                        claw_clearbit_busy(TB_RETRY,dev);
-                        if (test_and_set_bit(CLAW_BH_ACTIVE,
-    				(void *)&p_ch->flag_a) == 0) {
-    				tasklet_schedule(&p_ch->tasklet);
-                         }
-    			else {
-    				CLAW_DBF_TEXT(4,trace,"RdBHAct");
-    			}
-
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s: process CLAW_START_READ exit\n",
-				dev->name);
-#endif
-#ifdef FUNCTRACE
-			printk(KERN_INFO "%s:%s Exit on line %d\n",
-				dev->name,__func__,__LINE__);
-#endif
-			CLAW_DBF_TEXT(4,trace,"RdIRQXit");
-                        return;
-                case CLAW_START_WRITE:
-			if (p_ch->irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) {
-                                printk(KERN_INFO "%s: Unit Check Occured in "
-					"write channel\n",dev->name);
-                                clear_bit(0, (void *)&p_ch->IO_active);
-                                if (p_ch->irb->ecw[0] & 0x80 ) {
-                                        printk(KERN_INFO "%s: Resetting Event "
-						"occurred:\n",dev->name);
-                                        init_timer(&p_ch->timer);
-                                        p_ch->timer.function =
-						(void *)claw_write_retry;
-                                        p_ch->timer.data = (unsigned long)p_ch;
-                                        p_ch->timer.expires = jiffies + 10*HZ;
-                                        add_timer(&p_ch->timer);
-                                        printk(KERN_INFO "%s: write connection "
-						"restarting\n",dev->name);
-                                }
-#ifdef FUNCTRACE
-				printk(KERN_INFO "%s:%s Exit on line %d\n",
-					dev->name,__func__,__LINE__);
-#endif
-				CLAW_DBF_TEXT(4,trace,"rstrtwrt");
-                                return;
-                        }
-			if (p_ch->irb->scsw.cmd.dstat & DEV_STAT_UNIT_EXCEP) {
-                                        clear_bit(0, (void *)&p_ch->IO_active);
-                                        printk(KERN_INFO "%s: Unit Exception "
-						"Occured in write channel\n",
-						dev->name);
-                        }
-			if (!((p_ch->irb->scsw.cmd.stctl &
-			       SCSW_STCTL_SEC_STATUS) ||
-			     (p_ch->irb->scsw.cmd.stctl ==
-			      SCSW_STCTL_STATUS_PEND) ||
-			     (p_ch->irb->scsw.cmd.stctl ==
-			      (SCSW_STCTL_ALERT_STATUS |
-			       SCSW_STCTL_STATUS_PEND)))) {
-#ifdef FUNCTRACE
-				printk(KERN_INFO "%s:%s Exit on line %d\n",
-					dev->name,__func__,__LINE__);
-#endif
-				CLAW_DBF_TEXT(4,trace,"writeUE");
-                                return;
-                        }
-                        clear_bit(0, (void *)&p_ch->IO_active);
-                        if (claw_test_and_setbit_busy(TB_TX,dev)==0) {
-                                claw_write_next(p_ch);
-                                claw_clearbit_busy(TB_TX,dev);
-                                claw_clear_busy(dev);
-                        }
-                        p_ch_r=(struct chbk *)&privptr->channel[READ];
-                        if (test_and_set_bit(CLAW_BH_ACTIVE,
- 					(void *)&p_ch_r->flag_a) == 0) {
-			 	tasklet_schedule(&p_ch_r->tasklet);
-                        }
-
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s: process CLAW_START_WRITE exit\n",
-				 dev->name);
-#endif
-#ifdef FUNCTRACE
-			printk(KERN_INFO "%s:%s Exit on line %d\n",
-				dev->name,__func__,__LINE__);
-#endif
-			CLAW_DBF_TEXT(4,trace,"StWtExit");
-                        return;
-                default:
-                        printk(KERN_WARNING "%s: wrong selection code - irq "
-				"state=%d\n",dev->name,p_ch->claw_state);
-#ifdef FUNCTRACE
-			printk(KERN_INFO "%s:%s Exit on line %d\n",
-				dev->name,__func__,__LINE__);
-#endif
-			CLAW_DBF_TEXT(2,trace,"badIRQ");
-                        return;
+				CLAW_DBF_TEXT(4, trace, "PCINoBH");
+			CLAW_DBF_TEXT(4, trace, "PCI_read");
+			return;
+		}
+		if (!((p_ch->irb->scsw.cmd.stctl & SCSW_STCTL_SEC_STATUS) ||
+		 (p_ch->irb->scsw.cmd.stctl == SCSW_STCTL_STATUS_PEND) ||
+		 (p_ch->irb->scsw.cmd.stctl ==
+		 (SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)))) {
+			CLAW_DBF_TEXT(4, trace, "SPend_rd");
+			return;
+		}
+		clear_bit(0, (void *)&p_ch->IO_active);
+		claw_clearbit_busy(TB_RETRY, dev);
+		if (test_and_set_bit(CLAW_BH_ACTIVE,
+			(void *)&p_ch->flag_a) == 0)
+			tasklet_schedule(&p_ch->tasklet);
+		else
+			CLAW_DBF_TEXT(4, trace, "RdBHAct");
+		CLAW_DBF_TEXT(4, trace, "RdIRQXit");
+		return;
+	case CLAW_START_WRITE:
+		if (p_ch->irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) {
+			printk(KERN_INFO "%s: Unit Check Occured in "
+				"write channel\n", dev->name);
+			clear_bit(0, (void *)&p_ch->IO_active);
+			if (p_ch->irb->ecw[0] & 0x80) {
+				printk(KERN_INFO "%s: Resetting Event "
+					"occurred:\n", dev->name);
+				init_timer(&p_ch->timer);
+				p_ch->timer.function =
+					(void *)claw_write_retry;
+				p_ch->timer.data = (unsigned long)p_ch;
+				p_ch->timer.expires = jiffies + 10*HZ;
+				add_timer(&p_ch->timer);
+				printk(KERN_INFO "%s: write connection "
+					"restarting\n", dev->name);
+			}
+			CLAW_DBF_TEXT(4, trace, "rstrtwrt");
+			return;
+		}
+		if (p_ch->irb->scsw.cmd.dstat & DEV_STAT_UNIT_EXCEP) {
+			clear_bit(0, (void *)&p_ch->IO_active);
+			printk(KERN_INFO "%s: Unit Exception "
+			       "Occured in write channel\n",
+			       dev->name);
+		}
+		if (!((p_ch->irb->scsw.cmd.stctl & SCSW_STCTL_SEC_STATUS) ||
+		(p_ch->irb->scsw.cmd.stctl == SCSW_STCTL_STATUS_PEND) ||
+		(p_ch->irb->scsw.cmd.stctl ==
+		(SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)))) {
+			CLAW_DBF_TEXT(4, trace, "writeUE");
+			return;
+		}
+		clear_bit(0, (void *)&p_ch->IO_active);
+		if (claw_test_and_setbit_busy(TB_TX, dev) == 0) {
+			claw_write_next(p_ch);
+			claw_clearbit_busy(TB_TX, dev);
+			claw_clear_busy(dev);
+		}
+		p_ch_r = (struct chbk *)&privptr->channel[READ];
+		if (test_and_set_bit(CLAW_BH_ACTIVE,
+			(void *)&p_ch_r->flag_a) == 0)
+			tasklet_schedule(&p_ch_r->tasklet);
+		CLAW_DBF_TEXT(4, trace, "StWtExit");
+		return;
+	default:
+		printk(KERN_WARNING "%s: wrong selection code - irq "
+			"state=%d\n", dev->name, p_ch->claw_state);
+		CLAW_DBF_TEXT(2, trace, "badIRQ");
+		return;
         }
 
 }       /*   end of claw_irq_handler    */
@@ -1013,29 +779,11 @@ claw_irq_tasklet ( unsigned long data )
 
 	p_ch = (struct chbk *) data;
         dev = (struct net_device *)p_ch->ndev;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter  \n",dev->name,__func__);
-#endif
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: variable p_ch =\n",dev->name);
-        dumpit((char *) p_ch, sizeof(struct chbk));
-#endif
-	CLAW_DBF_TEXT(4,trace,"IRQtask");
-
+	CLAW_DBF_TEXT(4, trace, "IRQtask");
         privptr = (struct claw_privbk *) dev->priv;
-
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: bh routine - state-%02x\n" ,
-		dev->name, p_ch->claw_state);
-#endif
-
         unpack_read(dev);
         clear_bit(CLAW_BH_ACTIVE, (void *)&p_ch->flag_a);
-	CLAW_DBF_TEXT(4,trace,"TskletXt");
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
+	CLAW_DBF_TEXT(4, trace, "TskletXt");
         return;
 }       /*    end of claw_irq_bh    */
 
@@ -1060,16 +808,7 @@ claw_release(struct net_device *dev)
         privptr = (struct claw_privbk *) dev->priv;
         if (!privptr)
                 return 0;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter  \n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"release");
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: variable dev =\n",dev->name);
-        dumpit((char *) dev, sizeof(struct net_device));
-	printk(KERN_INFO "Priv Buffalloc %d\n",privptr->buffs_alloc);
-	printk(KERN_INFO "Priv p_buff_ccw = %p\n",&privptr->p_buff_ccw);
-#endif
+	CLAW_DBF_TEXT(4, trace, "release");
         privptr->release_pend=1;
         claw_setbit_busy(TB_STOP,dev);
         for ( i = 1; i >=0 ;  i--) {
@@ -1101,19 +840,15 @@ claw_release(struct net_device *dev)
 		privptr->pk_skb = NULL;
 	}
 	if(privptr->buffs_alloc != 1) {
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
-		CLAW_DBF_TEXT(4,trace,"none2fre");
+		CLAW_DBF_TEXT(4, trace, "none2fre");
 		return 0;
 	}
-	CLAW_DBF_TEXT(4,trace,"freebufs");
+	CLAW_DBF_TEXT(4, trace, "freebufs");
 	if (privptr->p_buff_ccw != NULL) {
         	free_pages((unsigned long)privptr->p_buff_ccw,
 	        	(int)pages_to_order_of_mag(privptr->p_buff_ccw_num));
 	}
-	CLAW_DBF_TEXT(4,trace,"freeread");
+	CLAW_DBF_TEXT(4, trace, "freeread");
         if (privptr->p_env->read_size < PAGE_SIZE) {
 	    if (privptr->p_buff_read != NULL) {
                 free_pages((unsigned long)privptr->p_buff_read,
@@ -1129,7 +864,7 @@ claw_release(struct net_device *dev)
                         p_buf=p_buf->next;
                 }
         }
-	 CLAW_DBF_TEXT(4,trace,"freewrit");
+	 CLAW_DBF_TEXT(4, trace, "freewrit");
         if (privptr->p_env->write_size < PAGE_SIZE ) {
                 free_pages((unsigned long)privptr->p_buff_write,
 		      (int)pages_to_order_of_mag(privptr->p_buff_write_num));
@@ -1143,7 +878,7 @@ claw_release(struct net_device *dev)
                         p_buf=p_buf->next;
                 }
         }
-	 CLAW_DBF_TEXT(4,trace,"clearptr");
+	 CLAW_DBF_TEXT(4, trace, "clearptr");
 	privptr->buffs_alloc = 0;
         privptr->p_buff_ccw=NULL;
         privptr->p_buff_read=NULL;
@@ -1180,18 +915,12 @@ claw_release(struct net_device *dev)
                 dev->name,
 		privptr->channel[READ].last_dstat,
 		privptr->channel[WRITE].last_dstat);
-		 CLAW_DBF_TEXT(2,trace,"badclose");
+		 CLAW_DBF_TEXT(2, trace, "badclose");
         }
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"rlsexit");
+	CLAW_DBF_TEXT(4, trace, "rlsexit");
         return 0;
 }      /* end of claw_release     */
 
-
-
 /*-------------------------------------------------------------------*
 *       claw_write_retry                                             *
 *                                                                    *
@@ -1203,32 +932,12 @@ claw_write_retry ( struct chbk *p_ch )
 
         struct net_device  *dev=p_ch->ndev;
 
-
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
-        printk(KERN_INFO "claw: variable p_ch =\n");
-        dumpit((char *) p_ch, sizeof(struct chbk));
-#endif
-	CLAW_DBF_TEXT(4,trace,"w_retry");
+	CLAW_DBF_TEXT(4, trace, "w_retry");
         if (p_ch->claw_state == CLAW_STOP) {
-#ifdef FUNCTRACE
-		printk(KERN_INFO "%s:%s Exit on line %d\n",
-			dev->name,__func__,__LINE__);
-#endif
         	return;
         }
-#ifdef DEBUGMSG
-        printk( KERN_INFO "%s:%s  state-%02x\n" ,
-		dev->name,
-		__func__,
-		p_ch->claw_state);
-#endif
 	claw_strt_out_IO( dev );
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"rtry_xit");
+	CLAW_DBF_TEXT(4, trace, "rtry_xit");
         return;
 }      /* end of claw_write_retry      */
 
@@ -1247,12 +956,7 @@ claw_write_next ( struct chbk * p_ch )
 	struct sk_buff *pk_skb;
 	int	rc;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter  \n",p_ch->ndev->name,__func__);
-        printk(KERN_INFO "%s: variable p_ch =\n",p_ch->ndev->name);
-        dumpit((char *) p_ch, sizeof(struct chbk));
-#endif
-	CLAW_DBF_TEXT(4,trace,"claw_wrt");
+	CLAW_DBF_TEXT(4, trace, "claw_wrt");
         if (p_ch->claw_state == CLAW_STOP)
                 return;
         dev = (struct net_device *) p_ch->ndev;
@@ -1272,11 +976,6 @@ claw_write_next ( struct chbk * p_ch )
         if (privptr->p_write_active_first!=NULL) {
                 claw_strt_out_IO(dev);
         }
-
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
         return;
 }      /* end of claw_write_next      */
 
@@ -1288,22 +987,12 @@ claw_write_next ( struct chbk * p_ch )
 static void
 claw_timer ( struct chbk * p_ch )
 {
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Entry\n",p_ch->ndev->name,__func__);
-        printk(KERN_INFO "%s: variable p_ch =\n",p_ch->ndev->name);
-        dumpit((char *) p_ch, sizeof(struct chbk));
-#endif
-	CLAW_DBF_TEXT(4,trace,"timer");
+	CLAW_DBF_TEXT(4, trace, "timer");
         p_ch->flag |= CLAW_TIMER;
         wake_up(&p_ch->wait);
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit on line %d\n",
-		p_ch->ndev->name,__func__,__LINE__);
-#endif
         return;
 }      /* end of claw_timer  */
 
-
 /*
 *
 *       functions
@@ -1324,10 +1013,8 @@ pages_to_order_of_mag(int num_of_pages)
 {
 	int	order_of_mag=1;		/* assume 2 pages */
 	int	nump=2;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s Enter pages = %d \n",__func__,num_of_pages);
-#endif
-	CLAW_DBF_TEXT_(5,trace,"pages%d",num_of_pages);
+
+	CLAW_DBF_TEXT_(5, trace, "pages%d", num_of_pages);
 	if (num_of_pages == 1)   {return 0; }  /* magnitude of 0 = 1 page */
 	/* 512 pages = 2Meg on 4k page systems */
 	if (num_of_pages >= 512) {return 9; }
@@ -1338,11 +1025,7 @@ pages_to_order_of_mag(int num_of_pages)
 	  order_of_mag +=1;
 	}
 	if (order_of_mag > 9) { order_of_mag = 9; }  /* I know it's paranoid */
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s Exit on line %d, order = %d\n",
-	__func__,__LINE__, order_of_mag);
-#endif
-	CLAW_DBF_TEXT_(5,trace,"mag%d",order_of_mag);
+	CLAW_DBF_TEXT_(5, trace, "mag%d", order_of_mag);
 	return order_of_mag;
 }
 
@@ -1358,21 +1041,7 @@ add_claw_reads(struct net_device *dev, struct ccwbk* p_first,
         struct claw_privbk *privptr;
         struct ccw1  temp_ccw;
         struct endccw * p_end;
-#ifdef IOTRACE
-        struct ccwbk*  p_buf;
-#endif
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter  \n",dev->name,__func__);
-#endif
-#ifdef DEBUGMSG
-        printk(KERN_INFO "dev\n");
-        dumpit((char *) dev, sizeof(struct net_device));
-        printk(KERN_INFO "p_first\n");
-        dumpit((char *) p_first, sizeof(struct ccwbk));
-        printk(KERN_INFO "p_last\n");
-        dumpit((char *) p_last, sizeof(struct ccwbk));
-#endif
-	CLAW_DBF_TEXT(4,trace,"addreads");
+	CLAW_DBF_TEXT(4, trace, "addreads");
         privptr = dev->priv;
         p_end = privptr->p_end_ccw;
 
@@ -1380,11 +1049,7 @@ add_claw_reads(struct net_device *dev, struct ccwbk* p_first,
         *       to apend the running channel programs
         */
         if ( p_first==NULL) {
-#ifdef FUNCTRACE
-		printk(KERN_INFO "%s:%s Exit on line %d\n",
-			dev->name,__func__,__LINE__);
-#endif
-		CLAW_DBF_TEXT(4,trace,"addexit");
+		CLAW_DBF_TEXT(4, trace, "addexit");
                 return 0;
         }
 
@@ -1411,21 +1076,11 @@ add_claw_reads(struct net_device *dev, struct ccwbk* p_first,
         }
 
         if ( privptr-> p_read_active_first ==NULL ) {
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s:%s p_read_active_first == NULL \n",
-			dev->name,__func__);
-                printk(KERN_INFO "%s:%s Read active first/last changed \n",
-			dev->name,__func__);
-#endif
                 privptr-> p_read_active_first= p_first;  /*    set new first */
                 privptr-> p_read_active_last = p_last;   /*    set new last  */
         }
         else {
 
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s:%s Read in progress \n",
-		dev->name,__func__);
-#endif
                 /* set up TIC ccw  */
                 temp_ccw.cda= (__u32)__pa(&p_first->read);
                 temp_ccw.count=0;
@@ -1462,27 +1117,7 @@ add_claw_reads(struct net_device *dev, struct ccwbk* p_first,
                 privptr->p_read_active_last->next = p_first;
                 privptr->p_read_active_last=p_last;
         } /* end of if ( privptr-> p_read_active_first ==NULL)  */
-#ifdef IOTRACE
-	printk(KERN_INFO "%s:%s  dump p_last CCW BK \n",dev->name,__func__);
-        dumpit((char *)p_last, sizeof(struct ccwbk));
-	printk(KERN_INFO "%s:%s  dump p_end CCW BK \n",dev->name,__func__);
-        dumpit((char *)p_end, sizeof(struct endccw));
-
-	printk(KERN_INFO "%s:%s dump p_first CCW BK \n",dev->name,__func__);
-        dumpit((char *)p_first, sizeof(struct ccwbk));
-        printk(KERN_INFO "%s:%s Dump Active CCW chain \n",
-		dev->name,__func__);
-        p_buf=privptr->p_read_active_first;
-        while (p_buf!=NULL) {
-                dumpit((char *)p_buf, sizeof(struct ccwbk));
-                p_buf=p_buf->next;
-        }
-#endif
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"addexit");
+	CLAW_DBF_TEXT(4, trace, "addexit");
         return 0;
 }    /*     end of add_claw_reads   */
 
@@ -1494,44 +1129,29 @@ add_claw_reads(struct net_device *dev, struct ccwbk* p_first,
 static void
 ccw_check_return_code(struct ccw_device *cdev, int return_code)
 {
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s: %s() > enter  \n",
-		cdev->dev.bus_id,__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"ccwret");
-#ifdef DEBUGMSG
-        printk(KERN_INFO "variable cdev =\n");
-        dumpit((char *) cdev, sizeof(struct ccw_device));
-        printk(KERN_INFO "variable return_code = %d\n",return_code);
-#endif
+	CLAW_DBF_TEXT(4, trace, "ccwret");
         if (return_code != 0) {
                 switch (return_code) {
-                        case -EBUSY:
-                                printk(KERN_INFO "%s: Busy !\n",
-					cdev->dev.bus_id);
-                                break;
-                        case -ENODEV:
-                                printk(KERN_EMERG "%s: Missing device called "
-					"for IO ENODEV\n", cdev->dev.bus_id);
-                                break;
-                        case -EIO:
-                                printk(KERN_EMERG "%s: Status pending... EIO \n",
-					cdev->dev.bus_id);
-                                break;
-			case -EINVAL:
-                                printk(KERN_EMERG "%s: Invalid Dev State EINVAL \n",
-					cdev->dev.bus_id);
-                                break;
-                        default:
-                                printk(KERN_EMERG "%s: Unknown error in "
+		case -EBUSY: /* BUSY is a transient state no action needed */
+			break;
+		case -ENODEV:
+			printk(KERN_EMERG "%s: Missing device called "
+				"for IO ENODEV\n", cdev->dev.bus_id);
+			break;
+		case -EIO:
+			printk(KERN_EMERG "%s: Status pending... EIO \n",
+				cdev->dev.bus_id);
+			break;
+		case -EINVAL:
+			printk(KERN_EMERG "%s: Invalid Dev State EINVAL \n",
+				cdev->dev.bus_id);
+			break;
+		default:
+			printk(KERN_EMERG "%s: Unknown error in "
 				 "Do_IO %d\n",cdev->dev.bus_id, return_code);
-                }
-        }
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s: %s() > exit on line %d\n",
-		cdev->dev.bus_id,__func__,__LINE__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"ccwret");
+		}
+	}
+	CLAW_DBF_TEXT(4, trace, "ccwret");
 }    /*    end of ccw_check_return_code   */
 
 /*-------------------------------------------------------------------*
@@ -1541,173 +1161,46 @@ ccw_check_return_code(struct ccw_device *cdev, int return_code)
 static void
 ccw_check_unit_check(struct chbk * p_ch, unsigned char sense )
 {
-	struct net_device *dev = p_ch->ndev;
-
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s: %s() > enter\n",dev->name,__func__);
-#endif
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: variable dev =\n",dev->name);
-        dumpit((char *)dev, sizeof(struct net_device));
-        printk(KERN_INFO "%s: variable sense =\n",dev->name);
-        dumpit((char *)&sense, 2);
-#endif
-	CLAW_DBF_TEXT(4,trace,"unitchek");
+	struct net_device *ndev = p_ch->ndev;
 
+	CLAW_DBF_TEXT(4, trace, "unitchek");
         printk(KERN_INFO "%s: Unit Check with sense byte:0x%04x\n",
-                dev->name, sense);
+	       ndev->name, sense);
 
         if (sense & 0x40) {
                 if (sense & 0x01) {
                         printk(KERN_WARNING "%s: Interface disconnect or "
 				"Selective reset "
-			       	"occurred (remote side)\n", dev->name);
+				"occurred (remote side)\n", ndev->name);
                 }
                 else {
                         printk(KERN_WARNING "%s: System reset occured"
-				" (remote side)\n", dev->name);
+				" (remote side)\n", ndev->name);
                 }
         }
         else if (sense & 0x20) {
                 if (sense & 0x04) {
                         printk(KERN_WARNING "%s: Data-streaming "
-				"timeout)\n", dev->name);
+				"timeout)\n", ndev->name);
                 }
                 else  {
                         printk(KERN_WARNING "%s: Data-transfer parity"
-				" error\n", dev->name);
+				" error\n", ndev->name);
                 }
         }
         else if (sense & 0x10) {
                 if (sense & 0x20) {
                         printk(KERN_WARNING "%s: Hardware malfunction "
-				"(remote side)\n", dev->name);
+				"(remote side)\n", ndev->name);
                 }
                 else {
                         printk(KERN_WARNING "%s: read-data parity error "
-				"(remote side)\n", dev->name);
+				"(remote side)\n", ndev->name);
                 }
         }
 
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s: %s() exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
 }   /*    end of ccw_check_unit_check    */
 
-
-
-/*-------------------------------------------------------------------*
-* Dump buffer format                                                 *
-*                                                                    *
-*--------------------------------------------------------------------*/
-#ifdef DEBUG
-static void
-dumpit(char* buf, int len)
-{
-
-        __u32      ct, sw, rm, dup;
-        char       *ptr, *rptr;
-        char       tbuf[82], tdup[82];
-#if (CONFIG_64BIT)
-        char       addr[22];
-#else
-        char       addr[12];
-#endif
-        char       boff[12];
-        char       bhex[82], duphex[82];
-        char       basc[40];
-
-        sw  = 0;
-        rptr =ptr=buf;
-        rm  = 16;
-        duphex[0]  = 0x00;
-        dup = 0;
-        for ( ct=0; ct < len; ct++, ptr++, rptr++ )  {
-                if (sw == 0) {
-#if (CONFIG_64BIT)
-                        sprintf(addr, "%16.16lX",(unsigned long)rptr);
-#else
-                        sprintf(addr, "%8.8X",(__u32)rptr);
-#endif
-                        sprintf(boff, "%4.4X", (__u32)ct);
-                        bhex[0] = '\0';
-                        basc[0] = '\0';
-                }
-                if ((sw == 4) || (sw == 12)) {
-                        strcat(bhex, " ");
-                }
-                if (sw == 8) {
-                        strcat(bhex, "  ");
-                }
-#if (CONFIG_64BIT)
-                sprintf(tbuf,"%2.2lX", (unsigned long)*ptr);
-#else
-                sprintf(tbuf,"%2.2X", (__u32)*ptr);
-#endif
-                tbuf[2] = '\0';
-                strcat(bhex, tbuf);
-                if ((0!=isprint(*ptr)) && (*ptr >= 0x20)) {
-                        basc[sw] = *ptr;
-                }
-                else {
-                        basc[sw] = '.';
-                }
-                basc[sw+1] = '\0';
-                sw++;
-                rm--;
-                if (sw==16) {
-                        if ((strcmp(duphex, bhex)) !=0) {
-                                if (dup !=0) {
-					sprintf(tdup,"Duplicate as above to"
-						" %s", addr);
-                                        printk( KERN_INFO "                 "
-						"   --- %s ---\n",tdup);
-                                }
-                                printk( KERN_INFO "   %s (+%s) : %s  [%s]\n",
-					 addr, boff, bhex, basc);
-                                dup = 0;
-                                strcpy(duphex, bhex);
-                        }
-                        else {
-                                dup++;
-                        }
-                        sw = 0;
-                        rm = 16;
-                }
-        }  /* endfor */
-
-        if (sw != 0) {
-                for ( ; rm > 0; rm--, sw++ ) {
-                        if ((sw==4) || (sw==12)) strcat(bhex, " ");
-                        if (sw==8)               strcat(bhex, "  ");
-                        strcat(bhex, "  ");
-                        strcat(basc, " ");
-                }
-                if (dup !=0) {
-                        sprintf(tdup,"Duplicate as above to %s", addr);
-                        printk( KERN_INFO "                    --- %s ---\n",
-				tdup);
-                }
-                printk( KERN_INFO "   %s (+%s) : %s  [%s]\n",
-			addr, boff, bhex, basc);
-        }
-        else {
-                if (dup >=1) {
-                        sprintf(tdup,"Duplicate as above to %s", addr);
-                        printk( KERN_INFO "                    --- %s ---\n",
-				tdup);
-                }
-                if (dup !=0) {
-                        printk( KERN_INFO "   %s (+%s) : %s  [%s]\n",
-				addr, boff, bhex, basc);
-                }
-        }
-        return;
-
-}   /*   end of dumpit  */
-#endif
-
 /*-------------------------------------------------------------------*
 *               find_link                                            *
 *--------------------------------------------------------------------*/
@@ -1718,16 +1211,7 @@ find_link(struct net_device *dev, char *host_name, char *ws_name )
 	struct claw_env *p_env;
 	int    rc=0;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s > enter  \n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"findlink");
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: variable dev = \n",dev->name);
-        dumpit((char *) dev, sizeof(struct net_device));
-        printk(KERN_INFO "%s: variable host_name = %s\n",dev->name, host_name);
-        printk(KERN_INFO "%s: variable ws_name = %s\n",dev->name, ws_name);
-#endif
+	CLAW_DBF_TEXT(2, setup, "findlink");
         privptr=dev->priv;
         p_env=privptr->p_env;
 	switch (p_env->packing)
@@ -1750,10 +1234,6 @@ find_link(struct net_device *dev, char *host_name, char *ws_name )
 			break;
 	}
 
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
         return 0;
 }    /*    end of find_link    */
 
@@ -1782,27 +1262,11 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
         int                             lock;
 	struct clawph			*pk_head;
 	struct chbk			*ch;
-#ifdef IOTRACE
-        struct ccwbk                   *p_buf;
-#endif
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s: %s() > enter\n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"hw_tx");
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: variable dev skb =\n",dev->name);
-        dumpit((char *) skb, sizeof(struct sk_buff));
-        printk(KERN_INFO "%s: variable dev =\n",dev->name);
-        dumpit((char *) dev, sizeof(struct net_device));
-        printk(KERN_INFO "%s: variable linkid = %ld\n",dev->name,linkid);
-#endif
+
+	CLAW_DBF_TEXT(4, trace, "hw_tx");
         privptr = (struct claw_privbk *) (dev->priv);
         p_ch=(struct chbk *)&privptr->channel[WRITE];
 	p_env =privptr->p_env;
-#ifdef IOTRACE
-	printk(KERN_INFO "%s: %s() dump sk_buff  \n",dev->name,__func__);
-        dumpit((char *)skb ,sizeof(struct sk_buff));
-#endif
 	claw_free_wrt_buf(dev);	/* Clean up free chain if posible */
         /*  scan the write queue to free any completed write packets   */
         p_first_ccw=NULL;
@@ -1834,11 +1298,6 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
                                 claw_strt_out_IO(dev );
                                 claw_free_wrt_buf( dev );
                                 if (privptr->write_free_count==0) {
-#ifdef IOTRACE
-                                	printk(KERN_INFO "%s: "
-					   "(claw_check_busy) no free write "
-					   "buffers\n", dev->name);
-#endif
 					ch = &privptr->channel[WRITE];
 					atomic_inc(&skb->users);
 					skb_queue_tail(&ch->collect_queue, skb);
@@ -1851,10 +1310,6 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
                 }
                 /*  tx lock  */
                 if (claw_test_and_setbit_busy(TB_TX,dev)) { /* set to busy */
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s:  busy  (claw_test_and_setbit_"
-				"busy)\n", dev->name);
-#endif
 			ch = &privptr->channel[WRITE];
 			atomic_inc(&skb->users);
 			skb_queue_tail(&ch->collect_queue, skb);
@@ -1871,28 +1326,16 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
             privptr->p_write_free_chain == NULL ) {
 
                 claw_setbit_busy(TB_NOBUFFER,dev);
-
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s:  busy  (claw_setbit_busy"
-			"(TB_NOBUFFER))\n", dev->name);
-                printk(KERN_INFO "       free_count: %d, numBuffers : %d\n",
-			(int)privptr->write_free_count,(int) numBuffers );
-#endif
 		ch = &privptr->channel[WRITE];
 		atomic_inc(&skb->users);
 		skb_queue_tail(&ch->collect_queue, skb);
-		CLAW_DBF_TEXT(2,trace,"clawbusy");
+		CLAW_DBF_TEXT(2, trace, "clawbusy");
                 goto Done2;
         }
         pDataAddress=skb->data;
         len_of_data=skb->len;
 
         while (len_of_data > 0) {
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s: %s() length-of-data is %ld \n",
-			dev->name ,__func__,len_of_data);
-                dumpit((char *)pDataAddress ,64);
-#endif
                 p_this_ccw=privptr->p_write_free_chain;  /* get a block */
 		if (p_this_ccw == NULL) { /* lost the race */
 			ch = &privptr->channel[WRITE];
@@ -1924,12 +1367,6 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
 				(__u32)__pa(&p_this_ccw->write);
                 }
                 p_last_ccw=p_this_ccw;      /* save new last block */
-#ifdef IOTRACE
-		printk(KERN_INFO "%s: %s() > CCW and Buffer %ld bytes long \n",
-			dev->name,__func__,bytesInThisBuffer);
-                dumpit((char *)p_this_ccw, sizeof(struct ccwbk));
-                dumpit((char *)p_this_ccw->p_buffer, 64);
-#endif
         }
 
         /*      FirstCCW and LastCCW now contain a new set of write channel
@@ -1962,13 +1399,11 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
                         pEnd->write1_nop2.count=1;
                 }  /* end if if (pEnd->write1) */
 
-
                 if (privptr->p_write_active_first==NULL ) {
                         privptr->p_write_active_first=p_first_ccw;
                         privptr->p_write_active_last=p_last_ccw;
                 }
                 else {
-
                         /*      set up Tic CCWs         */
 
                         tempCCW.cda=(__u32)__pa(&p_first_ccw->write);
@@ -2007,19 +1442,6 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
                 }
 
         } /* endif (p_first_ccw!=NULL)  */
-
-
-#ifdef IOTRACE
-        printk(KERN_INFO "%s: %s() >  Dump Active CCW chain \n",
-		dev->name,__func__);
-        p_buf=privptr->p_write_active_first;
-        while (p_buf!=NULL) {
-                dumpit((char *)p_buf, sizeof(struct ccwbk));
-                p_buf=p_buf->next;
-        }
-        p_buf=(struct ccwbk*)privptr->p_end_ccw;
-        dumpit((char *)p_buf, sizeof(struct endccw));
-#endif
         dev_kfree_skb_any(skb);
 	if (linkid==0) {
         	lock=LOCK_NO;
@@ -2029,21 +1451,12 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
         }
         claw_strt_out_IO(dev );
         /*      if write free count is zero , set NOBUFFER       */
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s() > free_count is %d\n",
-		dev->name,__func__,
-		(int) privptr->write_free_count );
-#endif
 	if (privptr->write_free_count==0) {
 		claw_setbit_busy(TB_NOBUFFER,dev);
         }
 Done2:
 	claw_clearbit_busy(TB_TX,dev);
 Done:
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s: %s() > exit on line %d, rc = %d \n",
-		dev->name,__func__,__LINE__, rc);
-#endif
 	return(rc);
 }    /*    end of claw_hw_tx    */
 
@@ -2075,14 +1488,7 @@ init_ccw_bk(struct net_device *dev)
         struct clawh *pClawH=NULL;
         addr_t   real_TIC_address;
         int i,j;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s: %s() enter  \n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"init_ccw");
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: variable dev =\n",dev->name);
-        dumpit((char *) dev, sizeof(struct net_device));
-#endif
+	CLAW_DBF_TEXT(4, trace, "init_ccw");
 
         /*  initialize  statistics field */
         privptr->active_link_ID=0;
@@ -2107,20 +1513,6 @@ init_ccw_bk(struct net_device *dev)
         */
         ccw_blocks_required =
 		privptr->p_env->read_buffers+privptr->p_env->write_buffers+1;
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s() "
-		"ccw_blocks_required=%d\n",
-		dev->name,__func__,
-		ccw_blocks_required);
-        printk(KERN_INFO "%s: %s() "
-		"PAGE_SIZE=0x%x\n",
-		dev->name,__func__,
-		(unsigned int)PAGE_SIZE);
-        printk(KERN_INFO "%s: %s() > "
-		"PAGE_MASK=0x%x\n",
-		dev->name,__func__,
-		(unsigned int)PAGE_MASK);
-#endif
         /*
         * compute number of CCW blocks that will fit in a page
         */
@@ -2128,14 +1520,6 @@ init_ccw_bk(struct net_device *dev)
         ccw_pages_required=
 		DIV_ROUND_UP(ccw_blocks_required, ccw_blocks_perpage);
 
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s() > ccw_blocks_perpage=%d\n",
-		dev->name,__func__,
-		ccw_blocks_perpage);
-        printk(KERN_INFO "%s: %s() > ccw_pages_required=%d\n",
-		dev->name,__func__,
-		ccw_pages_required);
-#endif
         /*
          *  read and write sizes are set by 2 constants in claw.h
 	 *  4k and 32k.  Unpacked values other than 4k are not going to
@@ -2166,36 +1550,6 @@ init_ccw_bk(struct net_device *dev)
 		claw_write_pages = privptr->p_env->write_buffers *
 					privptr->p_buff_pages_perwrite;
         }
-#ifdef DEBUGMSG
-        if (privptr->p_env->read_size < PAGE_SIZE) {
-            printk(KERN_INFO "%s: %s() reads_perpage=%d\n",
-		dev->name,__func__,
-		claw_reads_perpage);
-        }
-        else {
-            printk(KERN_INFO "%s: %s() pages_perread=%d\n",
-		dev->name,__func__,
-		privptr->p_buff_pages_perread);
-        }
-        printk(KERN_INFO "%s: %s() read_pages=%d\n",
-		dev->name,__func__,
-		claw_read_pages);
-        if (privptr->p_env->write_size < PAGE_SIZE) {
-            printk(KERN_INFO "%s: %s() writes_perpage=%d\n",
-		dev->name,__func__,
-		claw_writes_perpage);
-        }
-        else {
-            printk(KERN_INFO "%s: %s() pages_perwrite=%d\n",
-		dev->name,__func__,
-		privptr->p_buff_pages_perwrite);
-        }
-        printk(KERN_INFO "%s: %s() write_pages=%d\n",
-		dev->name,__func__,
-		claw_write_pages);
-#endif
-
-
         /*
         *               allocate ccw_pages_required
         */
@@ -2204,17 +1558,6 @@ init_ccw_bk(struct net_device *dev)
 			(void *)__get_free_pages(__GFP_DMA,
 		        (int)pages_to_order_of_mag(ccw_pages_required ));
                 if (privptr->p_buff_ccw==NULL) {
-                        printk(KERN_INFO "%s: %s()  "
-				"__get_free_pages for CCWs failed : "
-				"pages is %d\n",
-				dev->name,__func__,
-				ccw_pages_required );
-#ifdef FUNCTRACE
-                        printk(KERN_INFO "%s: %s() > "
-				"exit on line %d, rc = ENOMEM\n",
-				dev->name,__func__,
-				 __LINE__);
-#endif
                         return -ENOMEM;
                 }
                 privptr->p_buff_ccw_num=ccw_pages_required;
@@ -2229,11 +1572,6 @@ init_ccw_bk(struct net_device *dev)
         privptr->p_end_ccw = (struct endccw *)&privptr->end_ccw;
         real_address  = (__u32)__pa(privptr->p_end_ccw);
         /*                              Initialize ending CCW block       */
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s() begin initialize ending CCW blocks\n",
-		dev->name,__func__);
-#endif
-
         p_endccw=privptr->p_end_ccw;
         p_endccw->real=real_address;
         p_endccw->write1=0x00;
@@ -2287,21 +1625,10 @@ init_ccw_bk(struct net_device *dev)
         p_endccw->read2_nop2.count        = 1;
         p_endccw->read2_nop2.cda          = 0;
 
-#ifdef IOTRACE
-        printk(KERN_INFO "%s: %s() dump claw ending CCW BK \n",
-		dev->name,__func__);
-        dumpit((char *)p_endccw, sizeof(struct endccw));
-#endif
-
         /*
         *                               Build a chain of CCWs
         *
         */
-
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s()  Begin build a chain of CCW buffer \n",
-		dev->name,__func__);
-#endif
         p_buff=privptr->p_buff_ccw;
 
         p_free_chain=NULL;
@@ -2316,26 +1643,10 @@ init_ccw_bk(struct net_device *dev)
                 }
                 p_buff+=PAGE_SIZE;
         }
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s() "
-		"End build a chain of CCW buffer \n",
-			dev->name,__func__);
-        p_buf=p_free_chain;
-        while (p_buf!=NULL) {
-                dumpit((char *)p_buf, sizeof(struct ccwbk));
-                p_buf=p_buf->next;
-        }
-#endif
-
         /*
         *                               Initialize ClawSignalBlock
         *
         */
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s() "
-		"Begin initialize ClawSignalBlock \n",
-		dev->name,__func__);
-#endif
         if (privptr->p_claw_signal_blk==NULL) {
                 privptr->p_claw_signal_blk=p_free_chain;
                 p_free_chain=p_free_chain->next;
@@ -2344,12 +1655,6 @@ init_ccw_bk(struct net_device *dev)
                 pClawH->opcode=0xff;
                 pClawH->flag=CLAW_BUSY;
         }
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s() >  End initialize "
-	 	"ClawSignalBlock\n",
-		dev->name,__func__);
-        dumpit((char *)privptr->p_claw_signal_blk, sizeof(struct ccwbk));
-#endif
 
         /*
         *               allocate write_pages_required and add to free chain
@@ -2360,17 +1665,7 @@ init_ccw_bk(struct net_device *dev)
 			(void *)__get_free_pages(__GFP_DMA,
 			(int)pages_to_order_of_mag(claw_write_pages ));
                 if (privptr->p_buff_write==NULL) {
-                        printk(KERN_INFO "%s: %s() __get_free_pages for write"
-				" bufs failed : get is for %d pages\n",
-				dev->name,__func__,claw_write_pages );
-                        free_pages((unsigned long)privptr->p_buff_ccw,
-			   (int)pages_to_order_of_mag(privptr->p_buff_ccw_num));
                         privptr->p_buff_ccw=NULL;
-#ifdef FUNCTRACE
-                        printk(KERN_INFO "%s: %s() > exit on line %d,"
-			 	"rc = ENOMEM\n",
-				dev->name,__func__,__LINE__);
-#endif
                         return -ENOMEM;
                 }
                 /*
@@ -2380,10 +1675,6 @@ init_ccw_bk(struct net_device *dev)
 
                 memset(privptr->p_buff_write, 0x00,
 			ccw_pages_required * PAGE_SIZE);
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s: %s() Begin build claw write free "
-			"chain \n",dev->name,__func__);
-#endif
                 privptr->p_write_free_chain=NULL;
 
                 p_buff=privptr->p_buff_write;
@@ -2419,18 +1710,7 @@ init_ccw_bk(struct net_device *dev)
                    p_buff=(void *)__get_free_pages(__GFP_DMA,
 		        (int)pages_to_order_of_mag(
 			privptr->p_buff_pages_perwrite) );
-#ifdef IOTRACE
-                   printk(KERN_INFO "%s:%s __get_free_pages "
-		    "for writes buf: get for %d pages\n",
-		    dev->name,__func__,
-		    privptr->p_buff_pages_perwrite);
-#endif
                    if (p_buff==NULL) {
-			printk(KERN_INFO "%s:%s __get_free_pages "
-			 	"for writes buf failed : get is for %d pages\n",
-				dev->name,
-				__func__,
-				privptr->p_buff_pages_perwrite );
                         free_pages((unsigned long)privptr->p_buff_ccw,
 			      (int)pages_to_order_of_mag(
 			      		privptr->p_buff_ccw_num));
@@ -2443,12 +1723,6 @@ init_ccw_bk(struct net_device *dev)
 					privptr->p_buff_pages_perwrite));
                                 p_buf=p_buf->next;
                         }
-#ifdef FUNCTRACE
-                        printk(KERN_INFO "%s: %s exit on line %d, rc = ENOMEM\n",
-			dev->name,
-			__func__,
-			__LINE__);
-#endif
                         return -ENOMEM;
                    }  /* Error on get_pages   */
                    memset(p_buff, 0x00, privptr->p_env->write_size );
@@ -2477,15 +1751,6 @@ init_ccw_bk(struct net_device *dev)
         privptr->write_free_count=privptr->p_env->write_buffers;
 
 
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s:%s  End build claw write free chain \n",
-	dev->name,__func__);
-        p_buf=privptr->p_write_free_chain;
-        while (p_buf!=NULL) {
-                dumpit((char *)p_buf, sizeof(struct ccwbk));
-                p_buf=p_buf->next;
-        }
-#endif
         /*
         *               allocate read_pages_required and chain to free chain
         */
@@ -2495,10 +1760,6 @@ init_ccw_bk(struct net_device *dev)
 			(void *)__get_free_pages(__GFP_DMA,
 			(int)pages_to_order_of_mag(claw_read_pages) );
                 if (privptr->p_buff_read==NULL) {
-                        printk(KERN_INFO "%s: %s() "
-			 	"__get_free_pages for read buf failed : "
-			 	"get is for %d pages\n",
-				dev->name,__func__,claw_read_pages );
                         free_pages((unsigned long)privptr->p_buff_ccw,
 				(int)pages_to_order_of_mag(
 					privptr->p_buff_ccw_num));
@@ -2508,10 +1769,6 @@ init_ccw_bk(struct net_device *dev)
 				privptr->p_buff_write_num));
                         privptr->p_buff_ccw=NULL;
                         privptr->p_buff_write=NULL;
-#ifdef FUNCTRACE
-                        printk(KERN_INFO "%s: %s() > exit on line %d, rc ="
-				" ENOMEM\n",dev->name,__func__,__LINE__);
-#endif
                         return -ENOMEM;
                 }
                 memset(privptr->p_buff_read, 0x00, claw_read_pages * PAGE_SIZE);
@@ -2520,10 +1777,6 @@ init_ccw_bk(struct net_device *dev)
                 *                               Build CLAW read free chain
                 *
                 */
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s: %s() Begin build claw read free chain \n",
-			dev->name,__func__);
-#endif
                 p_buff=privptr->p_buff_read;
                 for (i=0 ; i< privptr->p_env->read_buffers ; i++) {
                         p_buf        = p_free_chain;
@@ -2600,19 +1853,10 @@ init_ccw_bk(struct net_device *dev)
                 }   /* for read_buffers   */
           }         /* read_size < PAGE_SIZE  */
           else {  /* read Size >= PAGE_SIZE  */
-
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s() Begin build claw read free chain \n",
-		dev->name,__func__);
-#endif
                 for (i=0 ; i< privptr->p_env->read_buffers ; i++) {
                         p_buff = (void *)__get_free_pages(__GFP_DMA,
 				(int)pages_to_order_of_mag(privptr->p_buff_pages_perread) );
                         if (p_buff==NULL) {
-                                printk(KERN_INFO "%s: %s() __get_free_pages for read "
-					"buf failed : get is for %d pages\n",
-					dev->name,__func__,
-                                        privptr->p_buff_pages_perread );
                                 free_pages((unsigned long)privptr->p_buff_ccw,
 					(int)pages_to_order_of_mag(privptr->p_buff_ccw_num));
 				/* free the write pages  */
@@ -2633,11 +1877,6 @@ init_ccw_bk(struct net_device *dev)
                                 }
                                 privptr->p_buff_ccw=NULL;
                                 privptr->p_buff_write=NULL;
-#ifdef FUNCTRACE
-                                printk(KERN_INFO "%s: %s() exit on line %d, rc = ENOMEM\n",
-					dev->name,__func__,
-					__LINE__);
-#endif
                                 return -ENOMEM;
                         }
                         memset(p_buff, 0x00, privptr->p_env->read_size);
@@ -2706,22 +1945,9 @@ init_ccw_bk(struct net_device *dev)
                 }    /* For read_buffers   */
           }     /*  read_size >= PAGE_SIZE   */
         }       /*  pBuffread = NULL */
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: %s() >  End build claw read free chain \n",
-		dev->name,__func__);
-        p_buf=p_first_CCWB;
-        while (p_buf!=NULL) {
-                dumpit((char *)p_buf, sizeof(struct ccwbk));
-                p_buf=p_buf->next;
-        }
-
-#endif
         add_claw_reads( dev  ,p_first_CCWB , p_last_CCWB);
 	privptr->buffs_alloc = 1;
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s: %s() exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
+
         return 0;
 }    /*    end of init_ccw_bk */
 
@@ -2735,14 +1961,8 @@ static void
 probe_error( struct ccwgroup_device *cgdev)
 {
   struct claw_privbk *privptr;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s enter  \n",__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"proberr");
-#ifdef DEBUGMSG
-	printk(KERN_INFO "%s variable cgdev =\n",__func__);
-        dumpit((char *) cgdev, sizeof(struct ccwgroup_device));
-#endif
+
+	CLAW_DBF_TEXT(4, trace, "proberr");
         privptr=(struct claw_privbk *)cgdev->dev.driver_data;
 	if (privptr!=NULL) {
 		kfree(privptr->p_env);
@@ -2752,16 +1972,9 @@ probe_error( struct ccwgroup_device *cgdev)
                 kfree(privptr);
                 privptr=NULL;
         }
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s > exit on line %d\n",
-		 __func__,__LINE__);
-#endif
-
         return;
 }    /*    probe_error    */
 
-
-
 /*-------------------------------------------------------------------*
 *    claw_process_control                                            *
 *                                                                    *
@@ -2783,32 +1996,19 @@ claw_process_control( struct net_device *dev, struct ccwbk * p_ccw)
         struct conncmd *p_connect=NULL;
         int rc;
         struct chbk *p_ch = NULL;
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s: %s() > enter  \n",
-		dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"clw_cntl");
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: variable dev =\n",dev->name);
-        dumpit((char *) dev, sizeof(struct net_device));
-        printk(KERN_INFO "%s: variable p_ccw =\n",dev->name);
-        dumpit((char *) p_ccw, sizeof(struct ccwbk *));
-#endif
+	struct device *tdev;
+	CLAW_DBF_TEXT(2, setup, "clw_cntl");
         udelay(1000);  /* Wait a ms for the control packets to
 			*catch up to each other */
         privptr=dev->priv;
         p_env=privptr->p_env;
+	tdev = &privptr->channel[READ].cdev->dev;
 	memcpy( &temp_host_name, p_env->host_name, 8);
         memcpy( &temp_ws_name, p_env->adapter_name , 8);
         printk(KERN_INFO "%s: CLAW device %.8s: "
 		"Received Control Packet\n",
 		dev->name, temp_ws_name);
         if (privptr->release_pend==1) {
-#ifdef FUNCTRACE
-                printk(KERN_INFO "%s: %s() > "
-			"exit on line %d, rc=0\n",
-			dev->name,__func__,__LINE__);
-#endif
                 return 0;
         }
         p_buf=p_ccw->p_buffer;
@@ -2818,261 +2018,246 @@ claw_process_control( struct net_device *dev, struct ccwbk * p_ccw)
 	} else {
 		memcpy(p_ctlbk, p_buf, sizeof(struct clawctl));
 	}
-#ifdef IOTRACE
-        printk(KERN_INFO "%s: dump claw control data inbound\n",dev->name);
-        dumpit((char *)p_ctlbk, sizeof(struct clawctl));
-#endif
         switch (p_ctlbk->command)
         {
-                case SYSTEM_VALIDATE_REQUEST:
-                        if (p_ctlbk->version!=CLAW_VERSION_ID) {
-                                claw_snd_sys_validate_rsp(dev, p_ctlbk,
-					CLAW_RC_WRONG_VERSION );
-                                printk("%s: %d is wrong version id. "
-					"Expected %d\n",
-					dev->name, p_ctlbk->version,
-                                        CLAW_VERSION_ID);
-                        }
-                        p_sysval=(struct sysval *)&(p_ctlbk->data);
-			printk( "%s: Recv Sys Validate Request: "
-				"Vers=%d,link_id=%d,Corr=%d,WS name=%."
-				"8s,Host name=%.8s\n",
-                                dev->name, p_ctlbk->version,
-				p_ctlbk->linkid,
-				p_ctlbk->correlator,
-				p_sysval->WS_name,
-                                p_sysval->host_name);
-                        if (0!=memcmp(temp_host_name,p_sysval->host_name,8)) {
-                                claw_snd_sys_validate_rsp(dev, p_ctlbk,
-					CLAW_RC_NAME_MISMATCH );
-				CLAW_DBF_TEXT(2,setup,"HSTBAD");
-				CLAW_DBF_TEXT_(2,setup,"%s",p_sysval->host_name);
-				CLAW_DBF_TEXT_(2,setup,"%s",temp_host_name);
-                                printk(KERN_INFO "%s:  Host name mismatch\n",
-					dev->name);
-				printk(KERN_INFO "%s: Received :%s: "
-					"expected :%s: \n",
-					dev->name,
-					p_sysval->host_name,
-					temp_host_name);
-                        }
-                        if (0!=memcmp(temp_ws_name,p_sysval->WS_name,8)) {
-                                claw_snd_sys_validate_rsp(dev, p_ctlbk,
-					CLAW_RC_NAME_MISMATCH );
-				CLAW_DBF_TEXT(2,setup,"WSNBAD");
-                                CLAW_DBF_TEXT_(2,setup,"%s",p_sysval->WS_name);
-                                CLAW_DBF_TEXT_(2,setup,"%s",temp_ws_name);
-                                printk(KERN_INFO "%s: WS name mismatch\n",
-					dev->name);
-				 printk(KERN_INFO "%s: Received :%s: "
-                                        "expected :%s: \n",
-                                        dev->name,
-                                        p_sysval->WS_name,
-					temp_ws_name);
-                        }
-                        if (( p_sysval->write_frame_size < p_env->write_size) &&
-			   ( p_env->packing == 0)) {
-                                claw_snd_sys_validate_rsp(dev, p_ctlbk,
-					CLAW_RC_HOST_RCV_TOO_SMALL );
-                                printk(KERN_INFO "%s: host write size is too "
-					"small\n", dev->name);
-				CLAW_DBF_TEXT(2,setup,"wrtszbad");
-                        }
-                        if (( p_sysval->read_frame_size < p_env->read_size) &&
-			   ( p_env->packing == 0)) {
-                                claw_snd_sys_validate_rsp(dev, p_ctlbk,
-					CLAW_RC_HOST_RCV_TOO_SMALL );
-                                printk(KERN_INFO "%s: host read size is too "
-					"small\n", dev->name);
-				CLAW_DBF_TEXT(2,setup,"rdsizbad");
-                        }
-                        claw_snd_sys_validate_rsp(dev, p_ctlbk, 0 );
-                        printk("%s: CLAW device %.8s: System validate"
-				" completed.\n",dev->name, temp_ws_name);
-			printk("%s: sys Validate Rsize:%d Wsize:%d\n",dev->name,
-				p_sysval->read_frame_size,p_sysval->write_frame_size);
-                        privptr->system_validate_comp=1;
-                	if(strncmp(p_env->api_type,WS_APPL_NAME_PACKED,6) == 0) {
-				p_env->packing = PACKING_ASK;
-			}
-                        claw_strt_conn_req(dev);
-                        break;
-
-                case SYSTEM_VALIDATE_RESPONSE:
-			p_sysval=(struct sysval *)&(p_ctlbk->data);
-			printk("%s: Recv Sys Validate Resp: Vers=%d,Corr=%d,RC=%d,"
-				"WS name=%.8s,Host name=%.8s\n",
-                        	dev->name,
-                        	p_ctlbk->version,
-                        	p_ctlbk->correlator,
-                        	p_ctlbk->rc,
-                        	p_sysval->WS_name,
-                        	p_sysval->host_name);
-                        switch (p_ctlbk->rc)
-                        {
-                                case 0:
-                                        printk(KERN_INFO "%s: CLAW device "
-						"%.8s: System validate "
-						"completed.\n",
-                                                dev->name, temp_ws_name);
-					if (privptr->system_validate_comp == 0)
-	                                        claw_strt_conn_req(dev);
-					privptr->system_validate_comp=1;
-                                        break;
-                                case CLAW_RC_NAME_MISMATCH:
-                                        printk(KERN_INFO "%s: Sys Validate "
-						"Resp : Host, WS name is "
-						"mismatch\n",
-                                                dev->name);
-                                        break;
-                                case CLAW_RC_WRONG_VERSION:
-                                        printk(KERN_INFO "%s: Sys Validate "
-						"Resp : Wrong version\n",
-						dev->name);
-                                        break;
-                                case CLAW_RC_HOST_RCV_TOO_SMALL:
-                                        printk(KERN_INFO "%s: Sys Validate "
-						"Resp : bad frame size\n",
-						dev->name);
-                                        break;
-                                default:
-                                        printk(KERN_INFO "%s: Sys Validate "
-						"error code=%d \n",
-						 dev->name, p_ctlbk->rc );
-                                        break;
-                        }
-                        break;
+	case SYSTEM_VALIDATE_REQUEST:
+		if (p_ctlbk->version != CLAW_VERSION_ID) {
+			claw_snd_sys_validate_rsp(dev, p_ctlbk,
+				CLAW_RC_WRONG_VERSION);
+			printk("%s: %d is wrong version id. "
+			       "Expected %d\n",
+			       dev->name, p_ctlbk->version,
+			       CLAW_VERSION_ID);
+		}
+		p_sysval = (struct sysval *)&(p_ctlbk->data);
+		printk("%s: Recv Sys Validate Request: "
+		       "Vers=%d,link_id=%d,Corr=%d,WS name=%."
+		       "8s,Host name=%.8s\n",
+		       dev->name, p_ctlbk->version,
+		       p_ctlbk->linkid,
+		       p_ctlbk->correlator,
+		       p_sysval->WS_name,
+		       p_sysval->host_name);
+		if (memcmp(temp_host_name, p_sysval->host_name, 8)) {
+			claw_snd_sys_validate_rsp(dev, p_ctlbk,
+				CLAW_RC_NAME_MISMATCH);
+			CLAW_DBF_TEXT(2, setup, "HSTBAD");
+			CLAW_DBF_TEXT_(2, setup, "%s", p_sysval->host_name);
+			CLAW_DBF_TEXT_(2, setup, "%s", temp_host_name);
+			printk(KERN_INFO "%s:  Host name mismatch\n",
+				dev->name);
+			printk(KERN_INFO "%s: Received :%s: "
+				"expected :%s: \n",
+				dev->name,
+				p_sysval->host_name,
+				temp_host_name);
+		}
+		if (memcmp(temp_ws_name, p_sysval->WS_name, 8)) {
+			claw_snd_sys_validate_rsp(dev, p_ctlbk,
+				CLAW_RC_NAME_MISMATCH);
+			CLAW_DBF_TEXT(2, setup, "WSNBAD");
+			CLAW_DBF_TEXT_(2, setup, "%s", p_sysval->WS_name);
+			CLAW_DBF_TEXT_(2, setup, "%s", temp_ws_name);
+			printk(KERN_INFO "%s: WS name mismatch\n",
+				dev->name);
+			printk(KERN_INFO "%s: Received :%s: "
+			       "expected :%s: \n",
+			       dev->name,
+			       p_sysval->WS_name,
+			       temp_ws_name);
+		}
+		if ((p_sysval->write_frame_size < p_env->write_size) &&
+		    (p_env->packing == 0)) {
+			claw_snd_sys_validate_rsp(dev, p_ctlbk,
+				CLAW_RC_HOST_RCV_TOO_SMALL);
+			printk(KERN_INFO "%s: host write size is too "
+				"small\n", dev->name);
+			CLAW_DBF_TEXT(2, setup, "wrtszbad");
+		}
+		if ((p_sysval->read_frame_size < p_env->read_size) &&
+		    (p_env->packing == 0)) {
+			claw_snd_sys_validate_rsp(dev, p_ctlbk,
+				CLAW_RC_HOST_RCV_TOO_SMALL);
+			printk(KERN_INFO "%s: host read size is too "
+				"small\n", dev->name);
+			CLAW_DBF_TEXT(2, setup, "rdsizbad");
+		}
+		claw_snd_sys_validate_rsp(dev, p_ctlbk, 0);
+		printk(KERN_INFO "%s: CLAW device %.8s: System validate "
+			"completed.\n", dev->name, temp_ws_name);
+		printk("%s: sys Validate Rsize:%d Wsize:%d\n", dev->name,
+			p_sysval->read_frame_size, p_sysval->write_frame_size);
+		privptr->system_validate_comp = 1;
+		if (strncmp(p_env->api_type, WS_APPL_NAME_PACKED, 6) == 0)
+			p_env->packing = PACKING_ASK;
+		claw_strt_conn_req(dev);
+		break;
+	case SYSTEM_VALIDATE_RESPONSE:
+		p_sysval = (struct sysval *)&(p_ctlbk->data);
+		printk("%s: Recv Sys Validate Resp: Vers=%d,Corr=%d,RC=%d,"
+			"WS name=%.8s,Host name=%.8s\n",
+			dev->name,
+			p_ctlbk->version,
+			p_ctlbk->correlator,
+			p_ctlbk->rc,
+			p_sysval->WS_name,
+			p_sysval->host_name);
+		switch (p_ctlbk->rc) {
+		case 0:
+			printk(KERN_INFO "%s: CLAW device "
+				"%.8s: System validate "
+				"completed.\n",
+			       dev->name, temp_ws_name);
+			if (privptr->system_validate_comp == 0)
+				claw_strt_conn_req(dev);
+			privptr->system_validate_comp = 1;
+			break;
+		case CLAW_RC_NAME_MISMATCH:
+			printk(KERN_INFO "%s: Sys Validate "
+				"Resp : Host, WS name is "
+				"mismatch\n",
+			       dev->name);
+			break;
+		case CLAW_RC_WRONG_VERSION:
+			printk(KERN_INFO "%s: Sys Validate "
+				"Resp : Wrong version\n",
+				dev->name);
+			break;
+		case CLAW_RC_HOST_RCV_TOO_SMALL:
+			printk(KERN_INFO "%s: Sys Validate "
+				"Resp : bad frame size\n",
+				dev->name);
+			break;
+		default:
+			printk(KERN_INFO "%s: Sys Validate "
+				"error code=%d \n",
+				 dev->name, p_ctlbk->rc);
+			break;
+		}
+		break;
 
-                case CONNECTION_REQUEST:
-                        p_connect=(struct conncmd *)&(p_ctlbk->data);
-                        printk(KERN_INFO "%s: Recv Conn Req: Vers=%d,link_id=%d,"
-				"Corr=%d,HOST appl=%.8s,WS appl=%.8s\n",
-                        	dev->name,
-	                        p_ctlbk->version,
-        	                p_ctlbk->linkid,
-                	        p_ctlbk->correlator,
-                        	p_connect->host_name,
-                      		p_connect->WS_name);
-                        if (privptr->active_link_ID!=0 ) {
-                                claw_snd_disc(dev, p_ctlbk);
-                                printk(KERN_INFO "%s: Conn Req error : "
-					"already logical link is active \n",
-					dev->name);
-                        }
-                        if (p_ctlbk->linkid!=1 ) {
-                                claw_snd_disc(dev, p_ctlbk);
-                                printk(KERN_INFO "%s: Conn Req error : "
-					"req logical link id is not 1\n",
+	case CONNECTION_REQUEST:
+		p_connect = (struct conncmd *)&(p_ctlbk->data);
+		printk(KERN_INFO "%s: Recv Conn Req: Vers=%d,link_id=%d,"
+			"Corr=%d,HOST appl=%.8s,WS appl=%.8s\n",
+			dev->name,
+			p_ctlbk->version,
+			p_ctlbk->linkid,
+			p_ctlbk->correlator,
+			p_connect->host_name,
+			p_connect->WS_name);
+		if (privptr->active_link_ID != 0) {
+			claw_snd_disc(dev, p_ctlbk);
+			printk(KERN_INFO "%s: Conn Req error : "
+				"already logical link is active \n",
+				dev->name);
+		}
+		if (p_ctlbk->linkid != 1) {
+			claw_snd_disc(dev, p_ctlbk);
+			printk(KERN_INFO "%s: Conn Req error : "
+				"req logical link id is not 1\n",
+				dev->name);
+		}
+		rc = find_link(dev, p_connect->host_name, p_connect->WS_name);
+		if (rc != 0) {
+			claw_snd_disc(dev, p_ctlbk);
+			printk(KERN_INFO "%s: Conn Resp error: "
+				"req appl name does not match\n",
+				dev->name);
+		}
+		claw_send_control(dev,
+			CONNECTION_CONFIRM, p_ctlbk->linkid,
+			p_ctlbk->correlator,
+			0, p_connect->host_name,
+			p_connect->WS_name);
+		if (p_env->packing == PACKING_ASK) {
+			p_env->packing = PACK_SEND;
+			claw_snd_conn_req(dev, 0);
+		}
+		printk(KERN_INFO "%s: CLAW device %.8s: Connection "
+			"completed link_id=%d.\n",
+			dev->name, temp_ws_name,
+			p_ctlbk->linkid);
+			privptr->active_link_ID = p_ctlbk->linkid;
+			p_ch = &privptr->channel[WRITE];
+			wake_up(&p_ch->wait);  /* wake up claw_open ( WRITE) */
+		break;
+	case CONNECTION_RESPONSE:
+		p_connect = (struct conncmd *)&(p_ctlbk->data);
+		printk(KERN_INFO "%s: Revc Conn Resp: Vers=%d,link_id=%d,"
+			"Corr=%d,RC=%d,Host appl=%.8s, WS appl=%.8s\n",
+			dev->name,
+			p_ctlbk->version,
+			p_ctlbk->linkid,
+			p_ctlbk->correlator,
+			p_ctlbk->rc,
+			p_connect->host_name,
+			p_connect->WS_name);
+
+		if (p_ctlbk->rc != 0) {
+			printk(KERN_INFO "%s: Conn Resp error: rc=%d \n",
+				dev->name, p_ctlbk->rc);
+			return 1;
+		}
+		rc = find_link(dev,
+			p_connect->host_name, p_connect->WS_name);
+		if (rc != 0) {
+			claw_snd_disc(dev, p_ctlbk);
+			printk(KERN_INFO "%s: Conn Resp error: "
+				"req appl name does not match\n",
+				 dev->name);
+		}
+		/* should be until CONNECTION_CONFIRM */
+		privptr->active_link_ID = -(p_ctlbk->linkid);
+		break;
+	case CONNECTION_CONFIRM:
+		p_connect = (struct conncmd *)&(p_ctlbk->data);
+		printk(KERN_INFO "%s: Recv Conn Confirm:Vers=%d,link_id=%d,"
+			"Corr=%d,Host appl=%.8s,WS appl=%.8s\n",
+			dev->name,
+			p_ctlbk->version,
+			p_ctlbk->linkid,
+			p_ctlbk->correlator,
+			p_connect->host_name,
+			p_connect->WS_name);
+		if (p_ctlbk->linkid == -(privptr->active_link_ID)) {
+			privptr->active_link_ID = p_ctlbk->linkid;
+			if (p_env->packing > PACKING_ASK) {
+				printk(KERN_INFO "%s: Confirmed Now packing\n",
 					dev->name);
-                        }
-                        rc=find_link(dev,
-				p_connect->host_name, p_connect->WS_name);
-                        if (rc!=0) {
-                                claw_snd_disc(dev, p_ctlbk);
-                                printk(KERN_INFO "%s: Conn Req error : "
-					"req appl name does not match\n",
-					 dev->name);
-                        }
-                        claw_send_control(dev,
-				CONNECTION_CONFIRM, p_ctlbk->linkid,
-				p_ctlbk->correlator,
-				0, p_connect->host_name,
-                                p_connect->WS_name);
-			if (p_env->packing == PACKING_ASK) {
-				printk("%s: Now Pack ask\n",dev->name);
-				p_env->packing = PACK_SEND;
-				claw_snd_conn_req(dev,0);
-			}
-                        printk(KERN_INFO "%s: CLAW device %.8s: Connection "
-				"completed link_id=%d.\n",
-				dev->name, temp_ws_name,
-                                p_ctlbk->linkid);
-                        privptr->active_link_ID=p_ctlbk->linkid;
-                        p_ch=&privptr->channel[WRITE];
-                        wake_up(&p_ch->wait);  /* wake up claw_open ( WRITE) */
-                        break;
-                case CONNECTION_RESPONSE:
-                        p_connect=(struct conncmd *)&(p_ctlbk->data);
-                        printk(KERN_INFO "%s: Revc Conn Resp: Vers=%d,link_id=%d,"
-				"Corr=%d,RC=%d,Host appl=%.8s, WS appl=%.8s\n",
-                                dev->name,
-				p_ctlbk->version,
-				p_ctlbk->linkid,
-				p_ctlbk->correlator,
-				p_ctlbk->rc,
-				p_connect->host_name,
-                                p_connect->WS_name);
-
-                        if (p_ctlbk->rc !=0 ) {
-                                printk(KERN_INFO "%s: Conn Resp error: rc=%d \n",
-					dev->name, p_ctlbk->rc);
-                                return 1;
-                        }
-                        rc=find_link(dev,
-				p_connect->host_name, p_connect->WS_name);
-                        if (rc!=0) {
-                                claw_snd_disc(dev, p_ctlbk);
-                                printk(KERN_INFO "%s: Conn Resp error: "
-					"req appl name does not match\n",
-					 dev->name);
-                        }
-			/* should be until CONNECTION_CONFIRM */
-                        privptr->active_link_ID =  - (p_ctlbk->linkid);
-                        break;
-                case CONNECTION_CONFIRM:
-                        p_connect=(struct conncmd *)&(p_ctlbk->data);
-                        printk(KERN_INFO "%s: Recv Conn Confirm:Vers=%d,link_id=%d,"
-				"Corr=%d,Host appl=%.8s,WS appl=%.8s\n",
-                        dev->name,
-                        p_ctlbk->version,
-                        p_ctlbk->linkid,
-                        p_ctlbk->correlator,
-                        p_connect->host_name,
-                        p_connect->WS_name);
-                        if (p_ctlbk->linkid== -(privptr->active_link_ID)) {
-                                privptr->active_link_ID=p_ctlbk->linkid;
-				if (p_env->packing > PACKING_ASK) {
-					printk(KERN_INFO "%s: Confirmed Now packing\n",dev->name);
-					p_env->packing = DO_PACKED;
-					}
-				p_ch=&privptr->channel[WRITE];
-                                wake_up(&p_ch->wait);
-                        }
-                        else {
-                                printk(KERN_INFO "%s: Conn confirm: "
-					"unexpected linkid=%d \n",
-					dev->name, p_ctlbk->linkid);
-                                claw_snd_disc(dev, p_ctlbk);
-                        }
-                        break;
-                case DISCONNECT:
-                        printk(KERN_INFO "%s: Disconnect: "
-				"Vers=%d,link_id=%d,Corr=%d\n",
-				dev->name, p_ctlbk->version,
-                                p_ctlbk->linkid, p_ctlbk->correlator);
-			if ((p_ctlbk->linkid == 2) &&
-			    (p_env->packing == PACK_SEND)) {
-				privptr->active_link_ID = 1;
 				p_env->packing = DO_PACKED;
 			}
-			else
-	                        privptr->active_link_ID=0;
-                        break;
-                case CLAW_ERROR:
-                        printk(KERN_INFO "%s: CLAW ERROR detected\n",
-				dev->name);
-                        break;
-                default:
-                        printk(KERN_INFO "%s:  Unexpected command code=%d \n",
-				dev->name,  p_ctlbk->command);
-                        break;
+			p_ch = &privptr->channel[WRITE];
+			wake_up(&p_ch->wait);
+		} else {
+		       printk(KERN_INFO "%s: Conn confirm: "
+				"unexpected linkid=%d \n",
+				dev->name, p_ctlbk->linkid);
+			claw_snd_disc(dev, p_ctlbk);
+		}
+		break;
+	case DISCONNECT:
+		printk(KERN_INFO "%s: Disconnect: "
+			"Vers=%d,link_id=%d,Corr=%d\n",
+			dev->name, p_ctlbk->version,
+			p_ctlbk->linkid, p_ctlbk->correlator);
+		if ((p_ctlbk->linkid == 2) &&
+		    (p_env->packing == PACK_SEND)) {
+			privptr->active_link_ID = 1;
+			p_env->packing = DO_PACKED;
+		} else
+			privptr->active_link_ID = 0;
+		break;
+	case CLAW_ERROR:
+		printk(KERN_INFO "%s: CLAW ERROR detected\n",
+			dev->name);
+		break;
+	default:
+		printk(KERN_INFO "%s:  Unexpected command code=%d \n",
+			dev->name,  p_ctlbk->command);
+		break;
         }
 
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s: %s() exit on line %d, rc = 0\n",
-		dev->name,__func__,__LINE__);
-#endif
-
         return 0;
 }   /*    end of claw_process_control    */
 
@@ -3092,18 +2277,7 @@ claw_send_control(struct net_device *dev, __u8 type, __u8 link,
         struct conncmd                  *p_connect;
         struct sk_buff 			*skb;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s > enter  \n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"sndcntl");
-#ifdef DEBUGMSG
-	printk(KERN_INFO "%s: Sending Control Packet \n",dev->name);
-        printk(KERN_INFO "%s: variable type = 0x%X, link = "
-		"%d, correlator = %d, rc = %d\n",
-                dev->name,type, link, correlator, rc);
-        printk(KERN_INFO "%s: variable local_name = %s, "
-		"remote_name = %s\n",dev->name, local_name, remote_name);
-#endif
+	CLAW_DBF_TEXT(2, setup, "sndcntl");
         privptr=dev->priv;
         p_ctl=(struct clawctl *)&privptr->ctl_bk;
 
@@ -3125,7 +2299,7 @@ claw_send_control(struct net_device *dev, __u8 type, __u8 link,
                         	p_sysval->read_frame_size=DEF_PACK_BUFSIZE;
 	                        p_sysval->write_frame_size=DEF_PACK_BUFSIZE;
 			} else {
-				/* how big is the piggest group of packets */
+				/* how big is the biggest group of packets */
 				p_sysval->read_frame_size=privptr->p_env->read_size;
 	                        p_sysval->write_frame_size=privptr->p_env->write_size;
 			}
@@ -3155,29 +2329,14 @@ claw_send_control(struct net_device *dev, __u8 type, __u8 link,
 
         skb = dev_alloc_skb(sizeof(struct clawctl));
         if (!skb) {
-                printk(  "%s:%s low on mem, returning...\n",
-			dev->name,__func__);
-#ifdef DEBUG
-                printk(KERN_INFO "%s:%s Exit, rc = ENOMEM\n",
-			dev->name,__func__);
-#endif
                 return -ENOMEM;
         }
 	memcpy(skb_put(skb, sizeof(struct clawctl)),
 		p_ctl, sizeof(struct clawctl));
-#ifdef IOTRACE
-	 printk(KERN_INFO "%s: outbnd claw cntl data \n",dev->name);
-        dumpit((char *)p_ctl,sizeof(struct clawctl));
-#endif
 	if (privptr->p_env->packing >= PACK_SEND)
 		claw_hw_tx(skb, dev, 1);
 	else
         	claw_hw_tx(skb, dev, 0);
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
-
         return 0;
 }  /*   end of claw_send_control  */
 
@@ -3192,22 +2351,11 @@ claw_snd_conn_req(struct net_device *dev, __u8 link)
         struct claw_privbk *privptr=dev->priv;
         struct clawctl 	   *p_ctl;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter  \n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"snd_conn");
-#ifdef  DEBUGMSG
-        printk(KERN_INFO "%s: variable link = %X, dev =\n",dev->name, link);
-        dumpit((char *) dev, sizeof(struct net_device));
-#endif
+	CLAW_DBF_TEXT(2, setup, "snd_conn");
 	rc = 1;
         p_ctl=(struct clawctl *)&privptr->ctl_bk;
 	p_ctl->linkid = link;
         if ( privptr->system_validate_comp==0x00 ) {
-#ifdef FUNCTRACE
-                printk(KERN_INFO "%s:%s Exit on line %d, rc = 1\n",
-			dev->name,__func__,__LINE__);
-#endif
                 return rc;
         }
 	if (privptr->p_env->packing == PACKING_ASK )
@@ -3220,10 +2368,6 @@ claw_snd_conn_req(struct net_device *dev, __u8 link)
 	if (privptr->p_env->packing == 0)
         	rc=claw_send_control(dev, CONNECTION_REQUEST,0,0,0,
        			HOST_APPL_NAME, privptr->p_env->api_type);
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d, rc = %d\n",
-		dev->name,__func__,__LINE__, rc);
-#endif
         return rc;
 
 }  /*  end of claw_snd_conn_req */
@@ -3240,25 +2384,12 @@ claw_snd_disc(struct net_device *dev, struct clawctl * p_ctl)
         int rc;
         struct conncmd *  p_connect;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"snd_dsc");
-#ifdef  DEBUGMSG
-        printk(KERN_INFO "%s: variable dev =\n",dev->name);
-        dumpit((char *) dev, sizeof(struct net_device));
-        printk(KERN_INFO "%s: variable p_ctl",dev->name);
-        dumpit((char *) p_ctl, sizeof(struct clawctl));
-#endif
+	CLAW_DBF_TEXT(2, setup, "snd_dsc");
         p_connect=(struct conncmd *)&p_ctl->data;
 
         rc=claw_send_control(dev, DISCONNECT, p_ctl->linkid,
 		p_ctl->correlator, 0,
                 p_connect->host_name, p_connect->WS_name);
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d, rc = %d\n",
-		dev->name,__func__, __LINE__, rc);
-#endif
         return rc;
 }     /*   end of claw_snd_disc    */
 
@@ -3276,18 +2407,7 @@ claw_snd_sys_validate_rsp(struct net_device *dev,
         struct claw_privbk *privptr;
         int    rc;
 
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Enter\n",
-		dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"chkresp");
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: variable return_code = %d, dev =\n",
-		dev->name, return_code);
-        dumpit((char *) dev, sizeof(struct net_device));
-        printk(KERN_INFO "%s: variable p_ctl =\n",dev->name);
-        dumpit((char *) p_ctl, sizeof(struct clawctl));
-#endif
+	CLAW_DBF_TEXT(2, setup, "chkresp");
         privptr = dev->priv;
         p_env=privptr->p_env;
         rc=claw_send_control(dev, SYSTEM_VALIDATE_RESPONSE,
@@ -3296,10 +2416,6 @@ claw_snd_sys_validate_rsp(struct net_device *dev,
                 return_code,
 		p_env->host_name,
 		p_env->adapter_name  );
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d, rc = %d\n",
-		dev->name,__func__,__LINE__, rc);
-#endif
         return rc;
 }     /*    end of claw_snd_sys_validate_rsp    */
 
@@ -3313,19 +2429,8 @@ claw_strt_conn_req(struct net_device *dev )
 {
         int rc;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"conn_req");
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s: variable dev =\n",dev->name);
-        dumpit((char *) dev, sizeof(struct net_device));
-#endif
+	CLAW_DBF_TEXT(2, setup, "conn_req");
         rc=claw_snd_conn_req(dev, 1);
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d, rc = %d\n",
-		dev->name,__func__,__LINE__, rc);
-#endif
         return rc;
 }    /*   end of claw_strt_conn_req   */
 
@@ -3339,15 +2444,9 @@ static struct
 net_device_stats *claw_stats(struct net_device *dev)
 {
         struct claw_privbk *privptr;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"stats");
+
+	CLAW_DBF_TEXT(4, trace, "stats");
         privptr = dev->priv;
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
         return &privptr->stats;
 }     /*   end of claw_stats   */
 
@@ -3368,36 +2467,28 @@ unpack_read(struct net_device *dev )
 	struct clawph 	*p_packh;
 	void		*p_packd;
 	struct clawctl 	*p_ctlrec=NULL;
+	struct device	*p_dev;
 
         __u32	len_of_data;
 	__u32	pack_off;
         __u8	link_num;
         __u8 	mtc_this_frm=0;
         __u32	bytes_to_mov;
-        struct chbk *p_ch = NULL;
         int	i=0;
 	int     p=0;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s enter  \n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"unpkread");
+	CLAW_DBF_TEXT(4, trace, "unpkread");
         p_first_ccw=NULL;
         p_last_ccw=NULL;
 	p_packh=NULL;
 	p_packd=NULL;
         privptr=dev->priv;
+
+	p_dev = &privptr->channel[READ].cdev->dev;
 	p_env = privptr->p_env;
         p_this_ccw=privptr->p_read_active_first;
         i=0;
 	while (p_this_ccw!=NULL && p_this_ccw->header.flag!=CLAW_PENDING) {
-#ifdef IOTRACE
-		printk(KERN_INFO "%s p_this_ccw \n",dev->name);
-                dumpit((char*)p_this_ccw, sizeof(struct ccwbk));
-                printk(KERN_INFO "%s Inbound p_this_ccw->p_buffer(64)"
-			" pk=%d \n",dev->name,p_env->packing);
-                dumpit((char *)p_this_ccw->p_buffer, 64 );
-#endif
 		pack_off = 0;
 		p = 0;
 		p_this_ccw->header.flag=CLAW_PENDING;
@@ -3419,10 +2510,6 @@ unpack_read(struct net_device *dev )
 		else
 	                link_num=p_this_ccw->header.opcode / 8;
                 if ((p_this_ccw->header.opcode & MORE_to_COME_FLAG)!=0) {
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s: %s > More_to_come is ON\n",
-			dev->name,__func__);
-#endif
                         mtc_this_frm=1;
                         if (p_this_ccw->header.length!=
 				privptr->p_env->read_size ) {
@@ -3445,22 +2532,12 @@ unpack_read(struct net_device *dev )
                                 privptr->mtc_skipping=0; /* Ok, the end */
                                 privptr->mtc_logical_link=-1;
                         }
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s:%s goto next "
-				"frame from MoretoComeSkip \n",
-				dev->name,__func__);
-#endif
                         goto NextFrame;
                 }
 
                 if (link_num==0) {
                         claw_process_control(dev, p_this_ccw);
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s:%s goto next "
-				"frame from claw_process_control \n",
-				dev->name,__func__);
-#endif
-			CLAW_DBF_TEXT(4,trace,"UnpkCntl");
+			CLAW_DBF_TEXT(4, trace, "UnpkCntl");
                         goto NextFrame;
                 }
 unpack_next:
@@ -3479,10 +2556,6 @@ unpack_next:
                 	bytes_to_mov=p_this_ccw->header.length;
 		}
                 if (privptr->mtc_logical_link<0) {
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s: %s mtc_logical_link < 0  \n",
-			dev->name,__func__);
-#endif
 
                 /*
                 *  if More-To-Come is set in this frame then we don't know
@@ -3496,15 +2569,6 @@ unpack_next:
 
                 if (bytes_to_mov > (MAX_ENVELOPE_SIZE- privptr->mtc_offset) ) {
                         /*      error     */
-#ifdef DEBUGMSG
-                        printk(KERN_INFO "%s: %s > goto next "
-				"frame from MoretoComeSkip \n",
-				dev->name,
-				__func__);
-                        printk(KERN_INFO "      bytes_to_mov %d > (MAX_ENVELOPE_"
-				"SIZE-privptr->mtc_offset %d)\n",
-				bytes_to_mov,(MAX_ENVELOPE_SIZE- privptr->mtc_offset));
-#endif
                         privptr->stats.rx_frame_errors++;
                         goto NextFrame;
                 }
@@ -3516,16 +2580,6 @@ unpack_next:
                 	memcpy( privptr->p_mtc_envelope+ privptr->mtc_offset,
                         	p_this_ccw->p_buffer, bytes_to_mov);
 		}
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s: %s() received data \n",
-			dev->name,__func__);
-		if (p_env->packing == DO_PACKED)
-			dumpit((char *)p_packd+sizeof(struct clawph),32);
-		else
-	                dumpit((char *)p_this_ccw->p_buffer, 32);
-		printk(KERN_INFO "%s: %s() bytelength %d \n",
-			dev->name,__func__,bytes_to_mov);
-#endif
                 if (mtc_this_frm==0) {
                         len_of_data=privptr->mtc_offset+bytes_to_mov;
                         skb=dev_alloc_skb(len_of_data);
@@ -3540,11 +2594,6 @@ unpack_next:
                                 privptr->stats.rx_packets++;
 				privptr->stats.rx_bytes+=len_of_data;
                                 netif_rx(skb);
-#ifdef DEBUGMSG
-                                printk(KERN_INFO "%s: %s() netif_"
-					"rx(skb) completed \n",
-					dev->name,__func__);
-#endif
                         }
                         else {
                                 privptr->stats.rx_dropped++;
@@ -3581,28 +2630,14 @@ NextFrame:
                 *       chain to next block on active read queue
                 */
                 p_this_ccw = privptr->p_read_active_first;
-		CLAW_DBF_TEXT_(4,trace,"rxpkt %d",p);
+		CLAW_DBF_TEXT_(4, trace, "rxpkt %d", p);
         } /* end of while */
 
         /*      check validity                  */
 
-#ifdef IOTRACE
-        printk(KERN_INFO "%s:%s processed frame is %d \n",
-		dev->name,__func__,i);
-        printk(KERN_INFO "%s:%s  F:%lx L:%lx\n",
-		dev->name,
-		__func__,
-		(unsigned long)p_first_ccw,
-		(unsigned long)p_last_ccw);
-#endif
-	CLAW_DBF_TEXT_(4,trace,"rxfrm %d",i);
+	CLAW_DBF_TEXT_(4, trace, "rxfrm %d", i);
         add_claw_reads(dev, p_first_ccw, p_last_ccw);
-        p_ch=&privptr->channel[READ];
         claw_strt_read(dev, LOCK_YES);
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s: %s exit on line %d\n",
-		dev->name, __func__, __LINE__);
-#endif
         return;
 }     /*  end of unpack_read   */
 
@@ -3622,12 +2657,7 @@ claw_strt_read (struct net_device *dev, int lock )
         struct clawh *p_clawh;
         p_ch=&privptr->channel[READ];
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter  \n",dev->name,__func__);
-        printk(KERN_INFO "%s: variable lock = %d, dev =\n",dev->name, lock);
-        dumpit((char *) dev, sizeof(struct net_device));
-#endif
-	CLAW_DBF_TEXT(4,trace,"StRdNter");
+	CLAW_DBF_TEXT(4, trace, "StRdNter");
         p_clawh=(struct clawh *)privptr->p_claw_signal_blk;
         p_clawh->flag=CLAW_IDLE;    /* 0x00 */
 
@@ -3637,21 +2667,11 @@ claw_strt_read (struct net_device *dev, int lock )
              privptr->p_read_active_first->header.flag!=CLAW_PENDING )) {
                 p_clawh->flag=CLAW_BUSY;    /* 0xff */
         }
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s:%s state-%02x\n" ,
-		dev->name,__func__, p_ch->claw_state);
-#endif
         if (lock==LOCK_YES) {
                 spin_lock_irqsave(get_ccwdev_lock(p_ch->cdev), saveflags);
         }
         if (test_and_set_bit(0, (void *)&p_ch->IO_active) == 0) {
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s: HOT READ started in %s\n" ,
-			dev->name,__func__);
-                p_clawh=(struct clawh *)privptr->p_claw_signal_blk;
-                dumpit((char *)&p_clawh->flag , 1);
-#endif
-		CLAW_DBF_TEXT(4,trace,"HotRead");
+		CLAW_DBF_TEXT(4, trace, "HotRead");
                 p_ccwbk=privptr->p_read_active_first;
                 parm = (unsigned long) p_ch;
                 rc = ccw_device_start (p_ch->cdev, &p_ccwbk->read, parm,
@@ -3661,21 +2681,13 @@ claw_strt_read (struct net_device *dev, int lock )
                 }
         }
 	else {
-#ifdef DEBUGMSG
-		printk(KERN_INFO "%s: No READ started by %s() In progress\n" ,
-			dev->name,__func__);
-#endif
-		CLAW_DBF_TEXT(2,trace,"ReadAct");
+		CLAW_DBF_TEXT(2, trace, "ReadAct");
 	}
 
         if (lock==LOCK_YES) {
                 spin_unlock_irqrestore(get_ccwdev_lock(p_ch->cdev), saveflags);
         }
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
-	CLAW_DBF_TEXT(4,trace,"StRdExit");
+	CLAW_DBF_TEXT(4, trace, "StRdExit");
         return;
 }       /*    end of claw_strt_read    */
 
@@ -3693,38 +2705,23 @@ claw_strt_out_IO( struct net_device *dev )
         struct chbk     	*p_ch;
         struct ccwbk   	*p_first_ccw;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
-#endif
 	if (!dev) {
 		return;
 	}
         privptr=(struct claw_privbk *)dev->priv;
         p_ch=&privptr->channel[WRITE];
 
-#ifdef DEBUGMSG
-        printk(KERN_INFO "%s:%s state-%02x\n" ,
-		dev->name,__func__,p_ch->claw_state);
-#endif
-        CLAW_DBF_TEXT(4,trace,"strt_io");
+	CLAW_DBF_TEXT(4, trace, "strt_io");
         p_first_ccw=privptr->p_write_active_first;
 
         if (p_ch->claw_state == CLAW_STOP)
                 return;
         if (p_first_ccw == NULL) {
-#ifdef FUNCTRACE
-                printk(KERN_INFO "%s:%s Exit on line %d\n",
-			dev->name,__func__,__LINE__);
-#endif
                 return;
         }
         if (test_and_set_bit(0, (void *)&p_ch->IO_active) == 0) {
                 parm = (unsigned long) p_ch;
-#ifdef DEBUGMSG
-		printk(KERN_INFO "%s:%s do_io \n" ,dev->name,__func__);
-                dumpit((char *)p_first_ccw, sizeof(struct ccwbk));
-#endif
-		CLAW_DBF_TEXT(2,trace,"StWrtIO");
+		CLAW_DBF_TEXT(2, trace, "StWrtIO");
                 rc = ccw_device_start (p_ch->cdev,&p_first_ccw->write, parm,
 				       0xff, 0);
                 if (rc != 0) {
@@ -3732,11 +2729,6 @@ claw_strt_out_IO( struct net_device *dev )
                 }
         }
         dev->trans_start = jiffies;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit on line %d\n",
-		dev->name,__func__,__LINE__);
-#endif
-
         return;
 }       /*    end of claw_strt_out_IO    */
 
@@ -3754,32 +2746,11 @@ claw_free_wrt_buf( struct net_device *dev )
 	struct ccwbk*p_last_ccw;
 	struct ccwbk*p_this_ccw;
 	struct ccwbk*p_next_ccw;
-#ifdef IOTRACE
-        struct ccwbk*p_buf;
-#endif
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
-        printk(KERN_INFO "%s: free count = %d  variable dev =\n",
-		dev->name,privptr->write_free_count);
-#endif
-	CLAW_DBF_TEXT(4,trace,"freewrtb");
+
+	CLAW_DBF_TEXT(4, trace, "freewrtb");
         /*  scan the write queue to free any completed write packets   */
         p_first_ccw=NULL;
         p_last_ccw=NULL;
-#ifdef IOTRACE
-        printk(KERN_INFO "%s:  Dump current CCW chain \n",dev->name  );
-        p_buf=privptr->p_write_active_first;
-        while (p_buf!=NULL) {
-                dumpit((char *)p_buf, sizeof(struct ccwbk));
-                p_buf=p_buf->next;
-        }
-        if (p_buf==NULL) {
-                printk(KERN_INFO "%s: privptr->p_write_"
-			"active_first==NULL\n",dev->name  );
-        }
-        p_buf=(struct ccwbk*)privptr->p_end_ccw;
-        dumpit((char *)p_buf, sizeof(struct endccw));
-#endif
         p_this_ccw=privptr->p_write_active_first;
         while ( (p_this_ccw!=NULL) && (p_this_ccw->header.flag!=CLAW_PENDING))
         {
@@ -3809,31 +2780,8 @@ claw_free_wrt_buf( struct net_device *dev )
         /*   whole chain removed?   */
         if (privptr->p_write_active_first==NULL) {
                 privptr->p_write_active_last=NULL;
-#ifdef DEBUGMSG
-                printk(KERN_INFO "%s:%s p_write_"
-			"active_first==NULL\n",dev->name,__func__);
-#endif
-        }
-#ifdef IOTRACE
-        printk(KERN_INFO "%s: Dump arranged CCW chain \n",dev->name  );
-        p_buf=privptr->p_write_active_first;
-        while (p_buf!=NULL) {
-                dumpit((char *)p_buf, sizeof(struct ccwbk));
-                p_buf=p_buf->next;
         }
-        if (p_buf==NULL) {
-                printk(KERN_INFO "%s: privptr->p_write_active_"
-			"first==NULL\n",dev->name  );
-        }
-        p_buf=(struct ccwbk*)privptr->p_end_ccw;
-        dumpit((char *)p_buf, sizeof(struct endccw));
-#endif
-
-	CLAW_DBF_TEXT_(4,trace,"FWC=%d",privptr->write_free_count);
-#ifdef FUNCTRACE
-        printk(KERN_INFO "%s:%s Exit on line %d free_count =%d\n",
-		dev->name,__func__, __LINE__,privptr->write_free_count);
-#endif
+	CLAW_DBF_TEXT_(4, trace, "FWC=%d", privptr->write_free_count);
         return;
 }
 
@@ -3845,14 +2793,11 @@ static void
 claw_free_netdevice(struct net_device * dev, int free_dev)
 {
 	struct claw_privbk *privptr;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"free_dev");
 
+	CLAW_DBF_TEXT(2, setup, "free_dev");
 	if (!dev)
 		return;
-	CLAW_DBF_TEXT_(2,setup,"%s",dev->name);
+	CLAW_DBF_TEXT_(2, setup, "%s", dev->name);
 	privptr = dev->priv;
 	if (dev->flags & IFF_RUNNING)
 		claw_release(dev);
@@ -3865,10 +2810,7 @@ claw_free_netdevice(struct net_device * dev, int free_dev)
 		free_netdev(dev);
 	}
 #endif
-	CLAW_DBF_TEXT(2,setup,"feee_ok");
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit\n",dev->name,__func__);
-#endif
+	CLAW_DBF_TEXT(2, setup, "free_ok");
 }
 
 /**
@@ -3879,17 +2821,8 @@ claw_free_netdevice(struct net_device * dev, int free_dev)
 static void
 claw_init_netdevice(struct net_device * dev)
 {
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"init_dev");
-	CLAW_DBF_TEXT_(2,setup,"%s",dev->name);
-	if (!dev) {
-        printk(KERN_WARNING "claw:%s BAD Device exit line %d\n",
-		__func__,__LINE__);
-		CLAW_DBF_TEXT(2,setup,"baddev");
-		return;
-	}
+	CLAW_DBF_TEXT(2, setup, "init_dev");
+	CLAW_DBF_TEXT_(2, setup, "%s", dev->name);
 	dev->mtu = CLAW_DEFAULT_MTU_SIZE;
 	dev->hard_start_xmit = claw_tx;
 	dev->open = claw_open;
@@ -3901,10 +2834,7 @@ claw_init_netdevice(struct net_device * dev)
 	dev->type = ARPHRD_SLIP;
 	dev->tx_queue_len = 1300;
 	dev->flags = IFF_POINTOPOINT | IFF_NOARP;
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Exit\n",dev->name,__func__);
-#endif
-	CLAW_DBF_TEXT(2,setup,"initok");
+	CLAW_DBF_TEXT(2, setup, "initok");
 	return;
 }
 
@@ -3921,10 +2851,7 @@ add_channel(struct ccw_device *cdev,int i,struct claw_privbk *privptr)
 	struct chbk *p_ch;
 	struct ccw_dev_id dev_id;
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "%s:%s Enter\n",cdev->dev.bus_id,__func__);
-#endif
-	CLAW_DBF_TEXT_(2,setup,"%s",cdev->dev.bus_id);
+	CLAW_DBF_TEXT_(2, setup, "%s", cdev->dev.bus_id);
 	privptr->channel[i].flag  = i+1;   /* Read is 1 Write is 2 */
 	p_ch = &privptr->channel[i];
 	p_ch->cdev = cdev;
@@ -3932,18 +2859,8 @@ add_channel(struct ccw_device *cdev,int i,struct claw_privbk *privptr)
 	ccw_device_get_id(cdev, &dev_id);
 	p_ch->devno = dev_id.devno;
 	if ((p_ch->irb = kzalloc(sizeof (struct irb),GFP_KERNEL)) == NULL) {
-		printk(KERN_WARNING "%s Out of memory in %s for irb\n",
-			p_ch->id,__func__);
-#ifdef FUNCTRACE
-        	printk(KERN_INFO "%s:%s Exit on line %d\n",
-			p_ch->id,__func__,__LINE__);
-#endif
 		return -ENOMEM;
 	}
-#ifdef FUNCTRACE
-        	printk(KERN_INFO "%s:%s Exit on line %d\n",
-			cdev->dev.bus_id,__func__,__LINE__);
-#endif
 	return 0;
 }
 
@@ -3965,9 +2882,8 @@ claw_new_device(struct ccwgroup_device *cgdev)
 	int ret;
 	struct ccw_dev_id dev_id;
 
-	pr_debug("%s() called\n", __func__);
 	printk(KERN_INFO "claw: add for %s\n",cgdev->cdev[READ]->dev.bus_id);
-	CLAW_DBF_TEXT(2,setup,"new_dev");
+	CLAW_DBF_TEXT(2, setup, "new_dev");
 	privptr = cgdev->dev.driver_data;
 	cgdev->cdev[READ]->dev.driver_data = privptr;
 	cgdev->cdev[WRITE]->dev.driver_data = privptr;
@@ -3982,22 +2898,21 @@ claw_new_device(struct ccwgroup_device *cgdev)
 	if (ret == 0)
 		ret = add_channel(cgdev->cdev[1],1,privptr);
 	if (ret != 0) {
-			printk(KERN_WARNING
-		 	"add channel failed "
-				"with ret = %d\n", ret);
-			goto out;
+		printk(KERN_WARNING
+			"add channel failed with ret = %d\n", ret);
+		goto out;
 	}
 	ret = ccw_device_set_online(cgdev->cdev[READ]);
 	if (ret != 0) {
 		printk(KERN_WARNING
-		 "claw: ccw_device_set_online %s READ failed "
+			"claw: ccw_device_set_online %s READ failed "
 			"with ret = %d\n",cgdev->cdev[READ]->dev.bus_id,ret);
 		goto out;
 	}
 	ret = ccw_device_set_online(cgdev->cdev[WRITE]);
 	if (ret != 0) {
 		printk(KERN_WARNING
-		 "claw: ccw_device_set_online %s WRITE failed "
+			"claw: ccw_device_set_online %s WRITE failed "
 			"with ret = %d\n",cgdev->cdev[WRITE]->dev.bus_id, ret);
 		goto out;
 	}
@@ -4014,18 +2929,16 @@ claw_new_device(struct ccwgroup_device *cgdev)
         SET_NETDEV_DEV(dev, &cgdev->dev);
 	if (register_netdev(dev) != 0) {
 		claw_free_netdevice(dev, 1);
-		CLAW_DBF_TEXT(2,trace,"regfail");
+		CLAW_DBF_TEXT(2, trace, "regfail");
 		goto out;
 	}
 	dev->flags &=~IFF_RUNNING;
 	if (privptr->buffs_alloc == 0) {
 	        ret=init_ccw_bk(dev);
 		if (ret !=0) {
-			printk(KERN_WARNING
-			 "claw: init_ccw_bk failed with ret=%d\n", ret);
 			unregister_netdev(dev);
 			claw_free_netdevice(dev,1);
-			CLAW_DBF_TEXT(2,trace,"ccwmem");
+			CLAW_DBF_TEXT(2, trace, "ccwmem");
 			goto out;
 		}
 	}
@@ -4047,7 +2960,6 @@ claw_new_device(struct ccwgroup_device *cgdev)
 out:
 	ccw_device_set_offline(cgdev->cdev[1]);
 	ccw_device_set_offline(cgdev->cdev[0]);
-
 	return -ENODEV;
 }
 
@@ -4056,8 +2968,7 @@ claw_purge_skb_queue(struct sk_buff_head *q)
 {
         struct sk_buff *skb;
 
-        CLAW_DBF_TEXT(4,trace,"purgque");
-
+	CLAW_DBF_TEXT(4, trace, "purgque");
         while ((skb = skb_dequeue(q))) {
                 atomic_dec(&skb->users);
                 dev_kfree_skb_any(skb);
@@ -4078,8 +2989,7 @@ claw_shutdown_device(struct ccwgroup_device *cgdev)
 	struct net_device *ndev;
 	int	ret;
 
-	pr_debug("%s() called\n", __func__);
-	CLAW_DBF_TEXT_(2,setup,"%s",cgdev->dev.bus_id);
+	CLAW_DBF_TEXT_(2, setup, "%s", cgdev->dev.bus_id);
 	priv = cgdev->dev.driver_data;
 	if (!priv)
 		return -ENODEV;
@@ -4108,13 +3018,10 @@ claw_remove_device(struct ccwgroup_device *cgdev)
 {
 	struct claw_privbk *priv;
 
-	pr_debug("%s() called\n", __func__);
-	CLAW_DBF_TEXT_(2,setup,"%s",cgdev->dev.bus_id);
+	BUG_ON(!cgdev);
+	CLAW_DBF_TEXT_(2, setup, "%s", cgdev->dev.bus_id);
 	priv = cgdev->dev.driver_data;
-	if (!priv) {
-		printk(KERN_WARNING "claw: %s() no Priv exiting\n",__func__);
-		return;
-	}
+	BUG_ON(!priv);
 	printk(KERN_INFO "claw: %s() called %s will be removed.\n",
 			__func__,cgdev->cdev[0]->dev.bus_id);
 	if (cgdev->state == CCWGROUP_ONLINE)
@@ -4133,6 +3040,8 @@ claw_remove_device(struct ccwgroup_device *cgdev)
 	cgdev->cdev[READ]->dev.driver_data = NULL;
 	cgdev->cdev[WRITE]->dev.driver_data = NULL;
 	put_device(&cgdev->dev);
+
+	return;
 }
 
 
@@ -4168,8 +3077,8 @@ claw_hname_write(struct device *dev, struct device_attribute *attr, const char *
 	strncpy(p_env->host_name,buf, count);
 	p_env->host_name[count-1] = 0x20;  /* clear extra 0x0a */
 	p_env->host_name[MAX_NAME_LEN] = 0x00;
-	CLAW_DBF_TEXT(2,setup,"HstnSet");
-        CLAW_DBF_TEXT_(2,setup,"%s",p_env->host_name);
+	CLAW_DBF_TEXT(2, setup, "HstnSet");
+	CLAW_DBF_TEXT_(2, setup, "%s", p_env->host_name);
 
 	return count;
 }
@@ -4186,7 +3095,7 @@ claw_adname_show(struct device *dev, struct device_attribute *attr, char *buf)
 	if (!priv)
 		return -ENODEV;
 	p_env = priv->p_env;
-	return sprintf(buf, "%s\n",p_env->adapter_name);
+	return sprintf(buf, "%s\n", p_env->adapter_name);
 }
 
 static ssize_t
@@ -4205,8 +3114,8 @@ claw_adname_write(struct device *dev, struct device_attribute *attr, const char
 	strncpy(p_env->adapter_name,buf, count);
 	p_env->adapter_name[count-1] = 0x20; /* clear extra 0x0a */
 	p_env->adapter_name[MAX_NAME_LEN] = 0x00;
-	CLAW_DBF_TEXT(2,setup,"AdnSet");
-	CLAW_DBF_TEXT_(2,setup,"%s",p_env->adapter_name);
+	CLAW_DBF_TEXT(2, setup, "AdnSet");
+	CLAW_DBF_TEXT_(2, setup, "%s", p_env->adapter_name);
 
 	return count;
 }
@@ -4247,15 +3156,15 @@ claw_apname_write(struct device *dev, struct device_attribute *attr, const char
 		p_env->read_size=DEF_PACK_BUFSIZE;
 		p_env->write_size=DEF_PACK_BUFSIZE;
 		p_env->packing=PACKING_ASK;
-		CLAW_DBF_TEXT(2,setup,"PACKING");
+		CLAW_DBF_TEXT(2, setup, "PACKING");
 	}
 	else {
 		p_env->packing=0;
 		p_env->read_size=CLAW_FRAME_SIZE;
 		p_env->write_size=CLAW_FRAME_SIZE;
-		CLAW_DBF_TEXT(2,setup,"ApiSet");
+		CLAW_DBF_TEXT(2, setup, "ApiSet");
 	}
-	CLAW_DBF_TEXT_(2,setup,"%s",p_env->api_type);
+	CLAW_DBF_TEXT_(2, setup, "%s", p_env->api_type);
 	return count;
 }
 
@@ -4295,8 +3204,8 @@ claw_wbuff_write(struct device *dev, struct device_attribute *attr, const char *
 	if ((nnn > max ) || (nnn < 2))
 		return -EINVAL;
 	p_env->write_buffers = nnn;
-	CLAW_DBF_TEXT(2,setup,"Wbufset");
-        CLAW_DBF_TEXT_(2,setup,"WB=%d",p_env->write_buffers);
+	CLAW_DBF_TEXT(2, setup, "Wbufset");
+	CLAW_DBF_TEXT_(2, setup, "WB=%d", p_env->write_buffers);
 	return count;
 }
 
@@ -4336,8 +3245,8 @@ claw_rbuff_write(struct device *dev, struct device_attribute *attr, const char *
 	if ((nnn > max ) || (nnn < 2))
 		return -EINVAL;
 	p_env->read_buffers = nnn;
-	CLAW_DBF_TEXT(2,setup,"Rbufset");
-	CLAW_DBF_TEXT_(2,setup,"RB=%d",p_env->read_buffers);
+	CLAW_DBF_TEXT(2, setup, "Rbufset");
+	CLAW_DBF_TEXT_(2, setup, "RB=%d", p_env->read_buffers);
 	return count;
 }
 
@@ -4359,16 +3268,14 @@ static struct attribute_group claw_attr_group = {
 static int
 claw_add_files(struct device *dev)
 {
-	pr_debug("%s() called\n", __func__);
-	CLAW_DBF_TEXT(2,setup,"add_file");
+	CLAW_DBF_TEXT(2, setup, "add_file");
 	return sysfs_create_group(&dev->kobj, &claw_attr_group);
 }
 
 static void
 claw_remove_files(struct device *dev)
 {
-	pr_debug("%s() called\n", __func__);
-	CLAW_DBF_TEXT(2,setup,"rem_file");
+	CLAW_DBF_TEXT(2, setup, "rem_file");
 	sysfs_remove_group(&dev->kobj, &claw_attr_group);
 }
 
@@ -4397,35 +3304,27 @@ claw_init(void)
 	int ret = 0;
 	printk(KERN_INFO "claw: starting driver\n");
 
-#ifdef FUNCTRACE
-	printk(KERN_INFO "claw: %s() enter \n",__func__);
-#endif
 	ret = claw_register_debug_facility();
 	if (ret) {
 		printk(KERN_WARNING "claw: %s() debug_register failed %d\n",
 			__func__,ret);
 		return ret;
 	}
-	CLAW_DBF_TEXT(2,setup,"init_mod");
+	CLAW_DBF_TEXT(2, setup, "init_mod");
 	ret = register_cu3088_discipline(&claw_group_driver);
 	if (ret) {
+		CLAW_DBF_TEXT(2, setup, "init_bad");
 		claw_unregister_debug_facility();
 		printk(KERN_WARNING "claw; %s() cu3088 register failed %d\n",
 			__func__,ret);
 	}
-#ifdef FUNCTRACE
-	printk(KERN_INFO "claw: %s() exit \n",__func__);
-#endif
 	return ret;
 }
 
 module_init(claw_init);
 module_exit(claw_cleanup);
 
-
-
-/*--------------------------------------------------------------------*
-*    End of File                                                      *
-*---------------------------------------------------------------------*/
-
-
+MODULE_AUTHOR("Andy Richter <richtera@us.ibm.com>");
+MODULE_DESCRIPTION("Linux for System z CLAW Driver\n" \
+			"Copyright 2000,2008 IBM Corporation\n");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From aa3f2cb63086e474a2ac3836d01fc6d9db393846 Mon Sep 17 00:00:00 2001
From: Peter Tiedemann <ptiedem@de.ibm.com>
Date: Fri, 18 Jul 2008 15:24:57 +0200
Subject: s390/net/ctcm: message cleanup

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/ctcm_dbug.c |   29 +-
 drivers/s390/net/ctcm_dbug.h |   39 +-
 drivers/s390/net/ctcm_fsms.c |  402 +++++++--------
 drivers/s390/net/ctcm_main.c |  514 +++++++++----------
 drivers/s390/net/ctcm_main.h |   31 +-
 drivers/s390/net/ctcm_mpc.c  | 1110 ++++++++++++++++--------------------------
 drivers/s390/net/ctcm_mpc.h  |    2 +-
 7 files changed, 882 insertions(+), 1245 deletions(-)

diff --git a/drivers/s390/net/ctcm_dbug.c b/drivers/s390/net/ctcm_dbug.c
index 8eb25d00b2e..1ca58f15347 100644
--- a/drivers/s390/net/ctcm_dbug.c
+++ b/drivers/s390/net/ctcm_dbug.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/stddef.h>
+#include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
@@ -22,15 +23,13 @@
  * Debug Facility Stuff
  */
 
-DEFINE_PER_CPU(char[256], ctcm_dbf_txt_buf);
-
 struct ctcm_dbf_info ctcm_dbf[CTCM_DBF_INFOS] = {
-	[CTCM_DBF_SETUP]	= {"ctc_setup", 8, 1, 64, 5, NULL},
-	[CTCM_DBF_ERROR]	= {"ctc_error", 8, 1, 64, 3, NULL},
-	[CTCM_DBF_TRACE]	= {"ctc_trace", 8, 1, 64, 3, NULL},
-	[CTCM_DBF_MPC_SETUP]	= {"mpc_setup", 8, 1, 64, 5, NULL},
-	[CTCM_DBF_MPC_ERROR]	= {"mpc_error", 8, 1, 64, 3, NULL},
-	[CTCM_DBF_MPC_TRACE]	= {"mpc_trace", 8, 1, 64, 3, NULL},
+	[CTCM_DBF_SETUP]     = {"ctc_setup", 8, 1, 64, CTC_DBF_INFO, NULL},
+	[CTCM_DBF_ERROR]     = {"ctc_error", 8, 1, 64, CTC_DBF_ERROR, NULL},
+	[CTCM_DBF_TRACE]     = {"ctc_trace", 8, 1, 64, CTC_DBF_ERROR, NULL},
+	[CTCM_DBF_MPC_SETUP] = {"mpc_setup", 8, 1, 80, CTC_DBF_INFO, NULL},
+	[CTCM_DBF_MPC_ERROR] = {"mpc_error", 8, 1, 80, CTC_DBF_ERROR, NULL},
+	[CTCM_DBF_MPC_TRACE] = {"mpc_trace", 8, 1, 80, CTC_DBF_ERROR, NULL},
 };
 
 void ctcm_unregister_dbf_views(void)
@@ -65,3 +64,17 @@ int ctcm_register_dbf_views(void)
 	return 0;
 }
 
+void ctcm_dbf_longtext(enum ctcm_dbf_names dbf_nix, int level, char *fmt, ...)
+{
+	char dbf_txt_buf[64];
+	va_list args;
+
+	if (level > (ctcm_dbf[dbf_nix].id)->level)
+		return;
+	va_start(args, fmt);
+	vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args);
+	va_end(args);
+
+	debug_text_event(ctcm_dbf[dbf_nix].id, level, dbf_txt_buf);
+}
+
diff --git a/drivers/s390/net/ctcm_dbug.h b/drivers/s390/net/ctcm_dbug.h
index fdff34fe59a..26966d0b9ab 100644
--- a/drivers/s390/net/ctcm_dbug.h
+++ b/drivers/s390/net/ctcm_dbug.h
@@ -20,16 +20,17 @@
 #else
  #define do_debug 0
 #endif
-#ifdef DEBUGDATA
- #define do_debug_data 1
-#else
- #define do_debug_data 0
-#endif
 #ifdef DEBUGCCW
  #define do_debug_ccw 1
+ #define DEBUGDATA 1
 #else
  #define do_debug_ccw 0
 #endif
+#ifdef DEBUGDATA
+ #define do_debug_data 1
+#else
+ #define do_debug_data 0
+#endif
 
 /* define dbf debug levels similar to kernel msg levels */
 #define	CTC_DBF_ALWAYS	0	/* always print this 			*/
@@ -42,8 +43,6 @@
 #define	CTC_DBF_INFO	5	/* informational			*/
 #define	CTC_DBF_DEBUG	6	/* debug-level messages			*/
 
-DECLARE_PER_CPU(char[256], ctcm_dbf_txt_buf);
-
 enum ctcm_dbf_names {
 	CTCM_DBF_SETUP,
 	CTCM_DBF_ERROR,
@@ -67,6 +66,7 @@ extern struct ctcm_dbf_info ctcm_dbf[CTCM_DBF_INFOS];
 
 int ctcm_register_dbf_views(void);
 void ctcm_unregister_dbf_views(void);
+void ctcm_dbf_longtext(enum ctcm_dbf_names dbf_nix, int level, char *text, ...);
 
 static inline const char *strtail(const char *s, int n)
 {
@@ -74,12 +74,6 @@ static inline const char *strtail(const char *s, int n)
 	return (l > n) ? s + (l - n) : s;
 }
 
-/* sort out levels early to avoid unnecessary sprintfs */
-static inline int ctcm_dbf_passes(debug_info_t *dbf_grp, int level)
-{
-	return (dbf_grp->level >= level);
-}
-
 #define CTCM_FUNTAIL strtail((char *)__func__, 16)
 
 #define CTCM_DBF_TEXT(name, level, text) \
@@ -94,16 +88,7 @@ static inline int ctcm_dbf_passes(debug_info_t *dbf_grp, int level)
 	} while (0)
 
 #define CTCM_DBF_TEXT_(name, level, text...) \
-	do { \
-		if (ctcm_dbf_passes(ctcm_dbf[CTCM_DBF_##name].id, level)) { \
-			char *ctcm_dbf_txt_buf = \
-					 get_cpu_var(ctcm_dbf_txt_buf); \
-			sprintf(ctcm_dbf_txt_buf, text); \
-			debug_text_event(ctcm_dbf[CTCM_DBF_##name].id, \
-					level, ctcm_dbf_txt_buf); \
-			put_cpu_var(ctcm_dbf_txt_buf); \
-		} \
-	} while (0)
+	ctcm_dbf_longtext(CTCM_DBF_##name, level, text)
 
 /*
  * cat : one of {setup, mpc_setup, trace, mpc_trace, error, mpc_error}.
@@ -112,13 +97,13 @@ static inline int ctcm_dbf_passes(debug_info_t *dbf_grp, int level)
  */
 #define CTCM_DBF_DEV_NAME(cat, dev, text) \
 	do { \
-		CTCM_DBF_TEXT_(cat, CTC_DBF_INFO, "%s(%s) : %s", \
+		CTCM_DBF_TEXT_(cat, CTC_DBF_INFO, "%s(%s) :- %s", \
 			CTCM_FUNTAIL, dev->name, text); \
 	} while (0)
 
 #define MPC_DBF_DEV_NAME(cat, dev, text) \
 	do { \
-		CTCM_DBF_TEXT_(MPC_##cat, CTC_DBF_INFO, "%s(%s) : %s", \
+		CTCM_DBF_TEXT_(MPC_##cat, CTC_DBF_INFO, "%s(%s) := %s", \
 			CTCM_FUNTAIL, dev->name, text); \
 	} while (0)
 
@@ -137,13 +122,13 @@ static inline int ctcm_dbf_passes(debug_info_t *dbf_grp, int level)
  */
 #define CTCM_DBF_DEV(cat, dev, text) \
 	do { \
-		CTCM_DBF_TEXT_(cat, CTC_DBF_INFO, "%s(%p) : %s", \
+		CTCM_DBF_TEXT_(cat, CTC_DBF_INFO, "%s(%p) :-: %s", \
 			CTCM_FUNTAIL, dev, text); \
 	} while (0)
 
 #define MPC_DBF_DEV(cat, dev, text) \
 	do { \
-		CTCM_DBF_TEXT_(MPC_##cat, CTC_DBF_INFO, "%s(%p) : %s", \
+		CTCM_DBF_TEXT_(MPC_##cat, CTC_DBF_INFO, "%s(%p) :=: %s", \
 			CTCM_FUNTAIL, dev, text); \
 	} while (0)
 
diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c
index 7e6bd387f4d..0b4e6253abe 100644
--- a/drivers/s390/net/ctcm_fsms.c
+++ b/drivers/s390/net/ctcm_fsms.c
@@ -190,7 +190,8 @@ static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg);
 void ctcm_ccw_check_rc(struct channel *ch, int rc, char *msg)
 {
 	CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
-			"ccw error %s (%s): %04x\n", ch->id, msg, rc);
+			"%s(%s): %s: %04x\n",
+				CTCM_FUNTAIL, ch->id, msg, rc);
 	switch (rc) {
 	case -EBUSY:
 		ctcm_pr_warn("%s (%s): Busy !\n", ch->id, msg);
@@ -212,7 +213,7 @@ void ctcm_purge_skb_queue(struct sk_buff_head *q)
 {
 	struct sk_buff *skb;
 
-	CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__);
+	CTCM_DBF_TEXT(TRACE, CTC_DBF_DEBUG, __func__);
 
 	while ((skb = skb_dequeue(q))) {
 		atomic_dec(&skb->users);
@@ -251,6 +252,8 @@ static void chx_txdone(fsm_instance *fi, int event, void *arg)
 	unsigned long duration;
 	struct timespec done_stamp = current_kernel_time(); /* xtime */
 
+	CTCM_PR_DEBUG("%s(%s): %s\n", __func__, ch->id, dev->name);
+
 	duration =
 	    (done_stamp.tv_sec - ch->prof.send_stamp.tv_sec) * 1000000 +
 	    (done_stamp.tv_nsec - ch->prof.send_stamp.tv_nsec) / 1000;
@@ -258,8 +261,9 @@ static void chx_txdone(fsm_instance *fi, int event, void *arg)
 		ch->prof.tx_time = duration;
 
 	if (ch->irb->scsw.cmd.count != 0)
-		ctcm_pr_debug("%s: TX not complete, remaining %d bytes\n",
-			     dev->name, ch->irb->scsw.cmd.count);
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG,
+			"%s(%s): TX not complete, remaining %d bytes",
+			     CTCM_FUNTAIL, dev->name, ch->irb->scsw.cmd.count);
 	fsm_deltimer(&ch->timer);
 	while ((skb = skb_dequeue(&ch->io_queue))) {
 		priv->stats.tx_packets++;
@@ -334,7 +338,8 @@ void ctcm_chx_txidle(fsm_instance *fi, int event, void *arg)
 	struct net_device *dev = ch->netdev;
 	struct ctcm_priv *priv = dev->priv;
 
-	CTCM_DBF_TEXT(TRACE, 6, __FUNCTION__);
+	CTCM_PR_DEBUG("%s(%s): %s\n", __func__, ch->id, dev->name);
+
 	fsm_deltimer(&ch->timer);
 	fsm_newstate(fi, CTC_STATE_TXIDLE);
 	fsm_event(priv->fsm, DEV_EVENT_TXUP, ch->netdev);
@@ -361,15 +366,17 @@ static void chx_rx(fsm_instance *fi, int event, void *arg)
 
 	fsm_deltimer(&ch->timer);
 	if (len < 8) {
-		ctcm_pr_debug("%s: got packet with length %d < 8\n",
-			     dev->name, len);
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
+			"%s(%s): got packet with length %d < 8\n",
+					CTCM_FUNTAIL, dev->name, len);
 		priv->stats.rx_dropped++;
 		priv->stats.rx_length_errors++;
 						goto again;
 	}
 	if (len > ch->max_bufsize) {
-		ctcm_pr_debug("%s: got packet with length %d > %d\n",
-			     dev->name, len, ch->max_bufsize);
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
+			"%s(%s): got packet with length %d > %d\n",
+				CTCM_FUNTAIL, dev->name, len, ch->max_bufsize);
 		priv->stats.rx_dropped++;
 		priv->stats.rx_length_errors++;
 						goto again;
@@ -388,8 +395,9 @@ static void chx_rx(fsm_instance *fi, int event, void *arg)
 		break;
 	}
 	if ((len < block_len) || (len > check_len)) {
-		ctcm_pr_debug("%s: got block length %d != rx length %d\n",
-			     dev->name, block_len, len);
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
+			"%s(%s): got block length %d != rx length %d\n",
+				CTCM_FUNTAIL, dev->name, block_len, len);
 		if (do_debug)
 			ctcmpc_dump_skb(skb, 0);
 
@@ -425,17 +433,23 @@ static void chx_rx(fsm_instance *fi, int event, void *arg)
  */
 static void chx_firstio(fsm_instance *fi, int event, void *arg)
 {
-	struct channel *ch = arg;
 	int rc;
+	struct channel *ch = arg;
+	int fsmstate = fsm_getstate(fi);
 
-	CTCM_DBF_TEXT(TRACE, 6, __FUNCTION__);
+	CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
+		"%s(%s) : %02x",
+		CTCM_FUNTAIL, ch->id, fsmstate);
 
-	if (fsm_getstate(fi) == CTC_STATE_TXIDLE)
-		ctcm_pr_debug("%s: remote side issued READ?, init.\n", ch->id);
+	ch->sense_rc = 0;	/* reset unit check report control */
+	if (fsmstate == CTC_STATE_TXIDLE)
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG,
+			"%s(%s): remote side issued READ?, init.\n",
+				CTCM_FUNTAIL, ch->id);
 	fsm_deltimer(&ch->timer);
 	if (ctcm_checkalloc_buffer(ch))
 		return;
-	if ((fsm_getstate(fi) == CTC_STATE_SETUPWAIT) &&
+	if ((fsmstate == CTC_STATE_SETUPWAIT) &&
 	    (ch->protocol == CTCM_PROTO_OS390)) {
 		/* OS/390 resp. z/OS */
 		if (CHANNEL_DIRECTION(ch->flags) == READ) {
@@ -451,7 +465,6 @@ static void chx_firstio(fsm_instance *fi, int event, void *arg)
 		}
 		return;
 	}
-
 	/*
 	 * Don't setup a timer for receiving the initial RX frame
 	 * if in compatibility mode, since VM TCP delays the initial
@@ -505,11 +518,10 @@ static void chx_rxidle(fsm_instance *fi, int event, void *arg)
 	__u16 buflen;
 	int rc;
 
-	CTCM_DBF_TEXT(TRACE, 6, __FUNCTION__);
 	fsm_deltimer(&ch->timer);
 	buflen = *((__u16 *)ch->trans_skb->data);
-	if (do_debug)
-		ctcm_pr_debug("%s: Initial RX count %d\n", dev->name, buflen);
+	CTCM_PR_DEBUG("%s: %s: Initial RX count = %d\n",
+			__func__, dev->name, buflen);
 
 	if (buflen >= CTCM_INITIAL_BLOCKLEN) {
 		if (ctcm_checkalloc_buffer(ch))
@@ -524,9 +536,9 @@ static void chx_rxidle(fsm_instance *fi, int event, void *arg)
 		} else
 			fsm_event(priv->fsm, DEV_EVENT_RXUP, dev);
 	} else {
-		if (do_debug)
-			ctcm_pr_debug("%s: Initial RX count %d not %d\n",
-				dev->name, buflen, CTCM_INITIAL_BLOCKLEN);
+		CTCM_PR_DEBUG("%s: %s: Initial RX count %d not %d\n",
+				__func__, dev->name,
+					buflen, CTCM_INITIAL_BLOCKLEN);
 		chx_firstio(fi, event, arg);
 	}
 }
@@ -548,14 +560,12 @@ static void ctcm_chx_setmode(fsm_instance *fi, int event, void *arg)
 	fsm_deltimer(&ch->timer);
 	if (IS_MPC(ch)) {
 		timeout = 1500;
-		if (do_debug)
-			ctcm_pr_debug("ctcm enter: %s(): cp=%i ch=0x%p id=%s\n",
-				__FUNCTION__, smp_processor_id(), ch, ch->id);
+		CTCM_PR_DEBUG("enter %s: cp=%i ch=0x%p id=%s\n",
+				__func__, smp_processor_id(), ch, ch->id);
 	}
 	fsm_addtimer(&ch->timer, timeout, CTC_EVENT_TIMER, ch);
 	fsm_newstate(fi, CTC_STATE_SETUPWAIT);
-	if (do_debug_ccw && IS_MPC(ch))
-		ctcmpc_dumpit((char *)&ch->ccw[6], sizeof(struct ccw1) * 2);
+	CTCM_CCW_DUMP((char *)&ch->ccw[6], sizeof(struct ccw1) * 2);
 
 	if (event == CTC_EVENT_TIMER)	/* only for timer not yet locked */
 		spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags);
@@ -583,24 +593,12 @@ static void ctcm_chx_setmode(fsm_instance *fi, int event, void *arg)
  */
 static void ctcm_chx_start(fsm_instance *fi, int event, void *arg)
 {
-	struct channel *ch = arg;
-	int rc;
-	struct net_device *dev;
+	struct channel *ch	= arg;
 	unsigned long saveflags;
+	int rc;
 
-	CTCM_DBF_TEXT(TRACE, 5, __FUNCTION__);
-	if (ch == NULL) {
-		ctcm_pr_warn("chx_start ch=NULL\n");
-		return;
-	}
-	if (ch->netdev == NULL) {
-		ctcm_pr_warn("chx_start dev=NULL, id=%s\n", ch->id);
-		return;
-	}
-	dev = ch->netdev;
-
-	if (do_debug)
-		ctcm_pr_debug("%s: %s channel start\n", dev->name,
+	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s(%s): %s",
+			CTCM_FUNTAIL, ch->id,
 			(CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX");
 
 	if (ch->trans_skb != NULL) {
@@ -618,11 +616,12 @@ static void ctcm_chx_start(fsm_instance *fi, int event, void *arg)
 		ch->ccw[1].count = 0;
 	}
 	if (ctcm_checkalloc_buffer(ch)) {
-		ctcm_pr_notice("%s: %s trans_skb allocation delayed "
-				"until first transfer\n", dev->name,
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG,
+			"%s(%s): %s trans_skb alloc delayed "
+			"until first transfer",
+			CTCM_FUNTAIL, ch->id,
 			(CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX");
 	}
-
 	ch->ccw[0].cmd_code = CCW_CMD_PREPARE;
 	ch->ccw[0].flags = CCW_FLAG_SLI | CCW_FLAG_CC;
 	ch->ccw[0].count = 0;
@@ -661,7 +660,6 @@ static void ctcm_chx_haltio(fsm_instance *fi, int event, void *arg)
 	int rc;
 	int oldstate;
 
-	CTCM_DBF_TEXT(TRACE, 2, __FUNCTION__);
 	fsm_deltimer(&ch->timer);
 	if (IS_MPC(ch))
 		fsm_deltimer(&ch->sweep_timer);
@@ -684,7 +682,7 @@ static void ctcm_chx_haltio(fsm_instance *fi, int event, void *arg)
 		fsm_deltimer(&ch->timer);
 		if (event != CTC_EVENT_STOP) {
 			fsm_newstate(fi, oldstate);
-			ctcm_ccw_check_rc(ch, rc, (char *)__FUNCTION__);
+			ctcm_ccw_check_rc(ch, rc, (char *)__func__);
 		}
 	}
 }
@@ -703,7 +701,9 @@ static void ctcm_chx_cleanup(fsm_instance *fi, int state,
 	struct net_device *dev = ch->netdev;
 	struct ctcm_priv *priv = dev->priv;
 
-	CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__);
+	CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
+			"%s(%s): %s[%d]\n",
+			CTCM_FUNTAIL, dev->name, ch->id, state);
 
 	fsm_deltimer(&ch->timer);
 	if (IS_MPC(ch))
@@ -743,7 +743,6 @@ static void ctcm_chx_cleanup(fsm_instance *fi, int state,
  */
 static void ctcm_chx_stopped(fsm_instance *fi, int event, void *arg)
 {
-	CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__);
 	ctcm_chx_cleanup(fi, CTC_STATE_STOPPED, arg);
 }
 
@@ -771,7 +770,6 @@ static void ctcm_chx_stop(fsm_instance *fi, int event, void *arg)
  */
 static void ctcm_chx_fail(fsm_instance *fi, int event, void *arg)
 {
-	CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__);
 	ctcm_chx_cleanup(fi, CTC_STATE_NOTOP, arg);
 }
 
@@ -809,8 +807,8 @@ static void ctcm_chx_setuperr(fsm_instance *fi, int event, void *arg)
 	}
 
 	CTCM_DBF_TEXT_(ERROR, CTC_DBF_CRIT,
-		"%s : %s error during %s channel setup state=%s\n",
-		dev->name, ctc_ch_event_names[event],
+		"%s(%s) : %s error during %s channel setup state=%s\n",
+		CTCM_FUNTAIL, dev->name, ctc_ch_event_names[event],
 		(CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX",
 		fsm_getstate_str(fi));
 
@@ -838,10 +836,12 @@ static void ctcm_chx_restart(fsm_instance *fi, int event, void *arg)
 	int oldstate;
 	int rc;
 
-	CTCM_DBF_TEXT(TRACE, CTC_DBF_NOTICE, __FUNCTION__);
+	CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
+		"%s: %s[%d] of %s\n",
+			CTCM_FUNTAIL, ch->id, event, dev->name);
+
 	fsm_deltimer(&ch->timer);
-	ctcm_pr_debug("%s: %s channel restart\n", dev->name,
-		     (CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX");
+
 	fsm_addtimer(&ch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, ch);
 	oldstate = fsm_getstate(fi);
 	fsm_newstate(fi, CTC_STATE_STARTWAIT);
@@ -876,13 +876,10 @@ static void ctcm_chx_rxiniterr(fsm_instance *fi, int event, void *arg)
 	struct net_device *dev = ch->netdev;
 	struct ctcm_priv *priv = dev->priv;
 
-	CTCM_DBF_TEXT(SETUP, 3, __FUNCTION__);
 	if (event == CTC_EVENT_TIMER) {
 		if (!IS_MPCDEV(dev))
 			/* TODO : check if MPC deletes timer somewhere */
 			fsm_deltimer(&ch->timer);
-		ctcm_pr_debug("%s: Timeout during RX init handshake\n",
-				dev->name);
 		if (ch->retry++ < 3)
 			ctcm_chx_restart(fi, event, arg);
 		else {
@@ -907,9 +904,10 @@ static void ctcm_chx_rxinitfail(fsm_instance *fi, int event, void *arg)
 	struct net_device *dev = ch->netdev;
 	struct ctcm_priv *priv = dev->priv;
 
-	CTCM_DBF_TEXT(SETUP, 3, __FUNCTION__);
+	CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+			"%s(%s): RX %s busy, init. fail",
+				CTCM_FUNTAIL, dev->name, ch->id);
 	fsm_newstate(fi, CTC_STATE_RXERR);
-	ctcm_pr_warn("%s: RX busy. Initialization failed\n", dev->name);
 	fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev);
 }
 
@@ -927,11 +925,10 @@ static void ctcm_chx_rxdisc(fsm_instance *fi, int event, void *arg)
 	struct net_device *dev = ch->netdev;
 	struct ctcm_priv *priv = dev->priv;
 
-	CTCM_DBF_DEV_NAME(TRACE, dev, "Got remote disconnect, re-initializing");
+	CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
+			"%s: %s: remote disconnect - re-init ...",
+				CTCM_FUNTAIL, dev->name);
 	fsm_deltimer(&ch->timer);
-	if (do_debug)
-		ctcm_pr_debug("%s: Got remote disconnect, "
-				"re-initializing ...\n", dev->name);
 	/*
 	 * Notify device statemachine
 	 */
@@ -961,8 +958,6 @@ static void ctcm_chx_txiniterr(fsm_instance *fi, int event, void *arg)
 
 	if (event == CTC_EVENT_TIMER) {
 		fsm_deltimer(&ch->timer);
-		CTCM_DBF_DEV_NAME(ERROR, dev,
-				"Timeout during TX init handshake");
 		if (ch->retry++ < 3)
 			ctcm_chx_restart(fi, event, arg);
 		else {
@@ -971,9 +966,8 @@ static void ctcm_chx_txiniterr(fsm_instance *fi, int event, void *arg)
 		}
 	} else {
 		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
-			"%s : %s error during channel setup state=%s",
-			dev->name, ctc_ch_event_names[event],
-			fsm_getstate_str(fi));
+			"%s(%s): %s in %s", CTCM_FUNTAIL, ch->id,
+			ctc_ch_event_names[event], fsm_getstate_str(fi));
 
 		ctcm_pr_warn("%s: Error during TX init handshake\n", dev->name);
 	}
@@ -993,15 +987,15 @@ static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg)
 	struct ctcm_priv *priv = dev->priv;
 	struct sk_buff *skb;
 
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n",
-			__FUNCTION__, smp_processor_id(), ch, ch->id);
+	CTCM_PR_DEBUG("Enter: %s: cp=%i ch=0x%p id=%s\n",
+			__func__, smp_processor_id(), ch, ch->id);
 
 	fsm_deltimer(&ch->timer);
 	if (ch->retry++ > 3) {
 		struct mpc_group *gptr = priv->mpcg;
-		ctcm_pr_debug("%s: TX retry failed, restarting channel\n",
-			     dev->name);
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_INFO,
+				"%s: %s: retries exceeded",
+					CTCM_FUNTAIL, ch->id);
 		fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev);
 		/* call restart if not MPC or if MPC and mpcg fsm is ready.
 			use gptr as mpc indicator */
@@ -1010,7 +1004,9 @@ static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg)
 				goto done;
 	}
 
-	ctcm_pr_debug("%s: TX retry %d\n", dev->name, ch->retry);
+	CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG,
+			"%s : %s: retry %d",
+				CTCM_FUNTAIL, ch->id, ch->retry);
 	skb = skb_peek(&ch->io_queue);
 	if (skb) {
 		int rc = 0;
@@ -1018,8 +1014,9 @@ static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg)
 		clear_normalized_cda(&ch->ccw[4]);
 		ch->ccw[4].count = skb->len;
 		if (set_normalized_cda(&ch->ccw[4], skb->data)) {
-			ctcm_pr_debug("%s: IDAL alloc failed, chan restart\n",
-						dev->name);
+			CTCM_DBF_TEXT_(TRACE, CTC_DBF_INFO,
+				"%s: %s: IDAL alloc failed",
+						CTCM_FUNTAIL, ch->id);
 			fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev);
 			ctcm_chx_restart(fi, event, arg);
 				goto done;
@@ -1061,22 +1058,21 @@ static void ctcm_chx_iofatal(fsm_instance *fi, int event, void *arg)
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
 	struct ctcm_priv *priv = dev->priv;
+	int rd = CHANNEL_DIRECTION(ch->flags);
 
-	CTCM_DBF_TEXT(TRACE, 3, __FUNCTION__);
 	fsm_deltimer(&ch->timer);
-	ctcm_pr_warn("%s %s : unrecoverable channel error\n",
-			CTC_DRIVER_NAME, dev->name);
+	CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+		"%s: %s: %s unrecoverable channel error",
+			CTCM_FUNTAIL, ch->id, rd == READ ? "RX" : "TX");
+
 	if (IS_MPC(ch)) {
 		priv->stats.tx_dropped++;
 		priv->stats.tx_errors++;
 	}
-
-	if (CHANNEL_DIRECTION(ch->flags) == READ) {
-		ctcm_pr_debug("%s: RX I/O error\n", dev->name);
+	if (rd == READ) {
 		fsm_newstate(fi, CTC_STATE_RXERR);
 		fsm_event(priv->fsm, DEV_EVENT_RXDOWN, dev);
 	} else {
-		ctcm_pr_debug("%s: TX I/O error\n", dev->name);
 		fsm_newstate(fi, CTC_STATE_TXERR);
 		fsm_event(priv->fsm, DEV_EVENT_TXDOWN, dev);
 	}
@@ -1216,27 +1212,27 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg)
 	struct sk_buff		*skb;
 	int		first = 1;
 	int		i;
-	struct timespec done_stamp;
 	__u32		data_space;
 	unsigned long	duration;
 	struct sk_buff	*peekskb;
 	int		rc;
 	struct th_header *header;
 	struct pdu	*p_header;
+	struct timespec done_stamp = current_kernel_time(); /* xtime */
 
-	if (do_debug)
-		ctcm_pr_debug("%s cp:%i enter:  %s()\n",
-			dev->name, smp_processor_id(), __FUNCTION__);
+	CTCM_PR_DEBUG("Enter %s: %s cp:%i\n",
+			__func__, dev->name, smp_processor_id());
 
-	done_stamp = current_kernel_time(); /* xtime */
-	duration = (done_stamp.tv_sec - ch->prof.send_stamp.tv_sec) * 1000000
-		+ (done_stamp.tv_nsec - ch->prof.send_stamp.tv_nsec) / 1000;
+	duration =
+		(done_stamp.tv_sec - ch->prof.send_stamp.tv_sec) * 1000000 +
+		(done_stamp.tv_nsec - ch->prof.send_stamp.tv_nsec) / 1000;
 	if (duration > ch->prof.tx_time)
 		ch->prof.tx_time = duration;
 
 	if (ch->irb->scsw.cmd.count != 0)
-		ctcm_pr_debug("%s: TX not complete, remaining %d bytes\n",
-				dev->name, ch->irb->scsw.cmd.count);
+		CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
+			"%s(%s): TX not complete, remaining %d bytes",
+			     CTCM_FUNTAIL, dev->name, ch->irb->scsw.cmd.count);
 	fsm_deltimer(&ch->timer);
 	while ((skb = skb_dequeue(&ch->io_queue))) {
 		priv->stats.tx_packets++;
@@ -1250,7 +1246,6 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg)
 	}
 	spin_lock(&ch->collect_lock);
 	clear_normalized_cda(&ch->ccw[4]);
-
 	if ((ch->collect_len <= 0) || (grp->in_sweep != 0)) {
 		spin_unlock(&ch->collect_lock);
 		fsm_newstate(fi, CTC_STATE_TXIDLE);
@@ -1269,17 +1264,13 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg)
 	if (ch->prof.maxcqueue < skb_queue_len(&ch->collect_queue))
 		ch->prof.maxcqueue = skb_queue_len(&ch->collect_queue);
 	i = 0;
-
-	if (do_debug_data)
-		ctcm_pr_debug("ctcmpc: %s() building "
-			       "trans_skb from collect_q \n", __FUNCTION__);
-
+	p_header = NULL;
 	data_space = grp->group_max_buflen - TH_HEADER_LENGTH;
 
-	if (do_debug_data)
-		ctcm_pr_debug("ctcmpc: %s() building trans_skb from collect_q"
-		       " data_space:%04x\n", __FUNCTION__, data_space);
-	p_header = NULL;
+	CTCM_PR_DBGDATA("%s: building trans_skb from collect_q"
+		       " data_space:%04x\n",
+		       __func__, data_space);
+
 	while ((skb = skb_dequeue(&ch->collect_queue))) {
 		memcpy(skb_put(ch->trans_skb, skb->len), skb->data, skb->len);
 		p_header = (struct pdu *)
@@ -1290,15 +1281,12 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg)
 		else
 			p_header->pdu_flag |= 0x20;
 
-		if (do_debug_data) {
-			ctcm_pr_debug("ctcmpc: %s()trans_skb len:%04x \n",
-				       __FUNCTION__, ch->trans_skb->len);
-			ctcm_pr_debug("ctcmpc: %s() pdu header and data"
-				       " for up to 32 bytes sent to vtam\n",
-				       __FUNCTION__);
-			ctcmpc_dumpit((char *)p_header,
-						min_t(int, skb->len, 32));
-		}
+		CTCM_PR_DBGDATA("%s: trans_skb len:%04x \n",
+				__func__, ch->trans_skb->len);
+		CTCM_PR_DBGDATA("%s: pdu header and data for up"
+				" to 32 bytes sent to vtam\n", __func__);
+		CTCM_D3_DUMP((char *)p_header, min_t(int, skb->len, 32));
+
 		ch->collect_len -= skb->len;
 		data_space -= skb->len;
 		priv->stats.tx_packets++;
@@ -1314,46 +1302,38 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg)
 	if (p_header)
 		p_header->pdu_flag |= PDU_LAST;	/*Say it's the last one*/
 	header = kzalloc(TH_HEADER_LENGTH, gfp_type());
-
 	if (!header) {
-		printk(KERN_WARNING "ctcmpc: OUT OF MEMORY IN %s()"
-		       ": Data Lost \n", __FUNCTION__);
 		spin_unlock(&ch->collect_lock);
 		fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev);
-		goto done;
+				goto done;
 	}
-
 	header->th_ch_flag = TH_HAS_PDU;  /* Normal data */
 	ch->th_seq_num++;
 	header->th_seq_num = ch->th_seq_num;
 
-	if (do_debug_data)
-		ctcm_pr_debug("%s: ToVTAM_th_seq= %08x\n" ,
-					__FUNCTION__, ch->th_seq_num);
+	CTCM_PR_DBGDATA("%s: ToVTAM_th_seq= %08x\n" ,
+					__func__, ch->th_seq_num);
 
 	memcpy(skb_push(ch->trans_skb, TH_HEADER_LENGTH), header,
 		TH_HEADER_LENGTH);	/* put the TH on the packet */
 
 	kfree(header);
 
-	if (do_debug_data) {
-		ctcm_pr_debug("ctcmpc: %s()trans_skb len:%04x \n",
-		       __FUNCTION__, ch->trans_skb->len);
-
-		ctcm_pr_debug("ctcmpc: %s() up-to-50 bytes of trans_skb "
-			"data to vtam from collect_q\n", __FUNCTION__);
-		ctcmpc_dumpit((char *)ch->trans_skb->data,
+	CTCM_PR_DBGDATA("%s: trans_skb len:%04x \n",
+		       __func__, ch->trans_skb->len);
+	CTCM_PR_DBGDATA("%s: up-to-50 bytes of trans_skb "
+			"data to vtam from collect_q\n", __func__);
+	CTCM_D3_DUMP((char *)ch->trans_skb->data,
 				min_t(int, ch->trans_skb->len, 50));
-	}
 
 	spin_unlock(&ch->collect_lock);
 	clear_normalized_cda(&ch->ccw[1]);
 	if (set_normalized_cda(&ch->ccw[1], ch->trans_skb->data)) {
 		dev_kfree_skb_any(ch->trans_skb);
 		ch->trans_skb = NULL;
-		printk(KERN_WARNING
-		       "ctcmpc: %s()CCW failure - data lost\n",
-		       __FUNCTION__);
+		CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_ERROR,
+			"%s: %s: IDAL alloc failed",
+				CTCM_FUNTAIL, ch->id);
 		fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev);
 		return;
 	}
@@ -1373,7 +1353,6 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg)
 	}
 done:
 	ctcm_clear_busy(dev);
-	ctcm_pr_debug("ctcmpc exit: %s  %s()\n", dev->name, __FUNCTION__);
 	return;
 }
 
@@ -1393,26 +1372,25 @@ static void ctcmpc_chx_rx(fsm_instance *fi, int event, void *arg)
 	struct mpc_group	*grp = priv->mpcg;
 	struct sk_buff		*skb = ch->trans_skb;
 	struct sk_buff		*new_skb;
-	unsigned long	saveflags = 0;	/* avoids compiler warning */
+	unsigned long		saveflags = 0;	/* avoids compiler warning */
 	int len	= ch->max_bufsize - ch->irb->scsw.cmd.count;
 
-	if (do_debug_data) {
-		CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG, "mpc_ch_rx %s cp:%i %s\n",
-				dev->name, smp_processor_id(), ch->id);
-		CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG, "mpc_ch_rx: maxbuf: %04x "
-				"len: %04x\n", ch->max_bufsize, len);
-	}
+	CTCM_PR_DEBUG("%s: %s: cp:%i %s maxbuf : %04x, len: %04x\n",
+			CTCM_FUNTAIL, dev->name, smp_processor_id(),
+				ch->id, ch->max_bufsize, len);
 	fsm_deltimer(&ch->timer);
 
 	if (skb == NULL) {
-		ctcm_pr_debug("ctcmpc exit:  %s() TRANS_SKB = NULL \n",
-			       __FUNCTION__);
-					goto again;
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): TRANS_SKB = NULL",
+				CTCM_FUNTAIL, dev->name);
+			goto again;
 	}
 
 	if (len < TH_HEADER_LENGTH) {
-		ctcm_pr_info("%s: got packet with invalid length %d\n",
-				dev->name, len);
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): packet length %d to short",
+					CTCM_FUNTAIL, dev->name, len);
 		priv->stats.rx_dropped++;
 		priv->stats.rx_length_errors++;
 	} else {
@@ -1422,11 +1400,9 @@ static void ctcmpc_chx_rx(fsm_instance *fi, int event, void *arg)
 		new_skb = __dev_alloc_skb(ch->max_bufsize, GFP_ATOMIC);
 
 		if (new_skb == NULL) {
-			printk(KERN_INFO "ctcmpc:%s() NEW_SKB = NULL\n",
-			       __FUNCTION__);
-			printk(KERN_WARNING "ctcmpc: %s() MEMORY ALLOC FAILED"
-			       " - DATA LOST - MPC FAILED\n",
-			       __FUNCTION__);
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%d): skb allocation failed",
+						CTCM_FUNTAIL, dev->name);
 			fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev);
 					goto again;
 		}
@@ -1479,9 +1455,8 @@ again:
 		break;
 	}
 
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit : %s %s(): ch=0x%p id=%s\n",
-				dev->name, __FUNCTION__, ch, ch->id);
+	CTCM_PR_DEBUG("Exit %s: %s, ch=0x%p, id=%s\n",
+			__func__, dev->name, ch, ch->id);
 
 }
 
@@ -1497,15 +1472,16 @@ static void ctcmpc_chx_firstio(fsm_instance *fi, int event, void *arg)
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
 	struct ctcm_priv	*priv = dev->priv;
+	struct mpc_group	*gptr = priv->mpcg;
+
+	CTCM_PR_DEBUG("Enter %s: id=%s, ch=0x%p\n",
+				__func__, ch->id, ch);
+
+	CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_INFO,
+			"%s: %s: chstate:%i, grpstate:%i, prot:%i\n",
+			CTCM_FUNTAIL, ch->id, fsm_getstate(fi),
+			fsm_getstate(gptr->fsm), ch->protocol);
 
-	if (do_debug) {
-		struct mpc_group *gptr = priv->mpcg;
-		ctcm_pr_debug("ctcmpc enter: %s(): ch=0x%p id=%s\n",
-				__FUNCTION__, ch, ch->id);
-		ctcm_pr_debug("%s() %s chstate:%i grpstate:%i chprotocol:%i\n",
-				__FUNCTION__, ch->id, fsm_getstate(fi),
-				fsm_getstate(gptr->fsm), ch->protocol);
-	}
 	if (fsm_getstate(fi) == CTC_STATE_TXIDLE)
 		MPC_DBF_DEV_NAME(TRACE, dev, "remote side issued READ? ");
 
@@ -1531,9 +1507,8 @@ static void ctcmpc_chx_firstio(fsm_instance *fi, int event, void *arg)
 		     ? CTC_STATE_RXINIT : CTC_STATE_TXINIT);
 
 done:
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n",
-			__FUNCTION__, ch, ch->id);
+	CTCM_PR_DEBUG("Exit %s: id=%s, ch=0x%p\n",
+				__func__, ch->id, ch);
 	return;
 }
 
@@ -1556,12 +1531,9 @@ void ctcmpc_chx_rxidle(fsm_instance *fi, int event, void *arg)
 	unsigned long saveflags = 0;	/* avoids compiler warning */
 
 	fsm_deltimer(&ch->timer);
-	ctcm_pr_debug("%s cp:%i enter:  %s()\n",
-		       dev->name, smp_processor_id(), __FUNCTION__);
-	if (do_debug)
-		ctcm_pr_debug("%s() %s chstate:%i grpstate:%i\n",
-			__FUNCTION__, ch->id,
-			fsm_getstate(fi), fsm_getstate(grp->fsm));
+	CTCM_PR_DEBUG("%s: %s: %s: cp:%i, chstate:%i grpstate:%i\n",
+			__func__, ch->id, dev->name, smp_processor_id(),
+				fsm_getstate(fi), fsm_getstate(grp->fsm));
 
 	fsm_newstate(fi, CTC_STATE_RXIDLE);
 	/* XID processing complete */
@@ -1575,9 +1547,7 @@ void ctcmpc_chx_rxidle(fsm_instance *fi, int event, void *arg)
 		skb_reset_tail_pointer(ch->trans_skb);
 		ch->trans_skb->len = 0;
 		ch->ccw[1].count = ch->max_bufsize;
-		if (do_debug_ccw)
-			ctcmpc_dumpit((char *)&ch->ccw[0],
-						sizeof(struct ccw1) * 3);
+		CTCM_CCW_DUMP((char *)&ch->ccw[0], sizeof(struct ccw1) * 3);
 		if (event == CTC_EVENT_START)
 			/* see remark about conditional locking */
 			spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags);
@@ -1598,9 +1568,6 @@ void ctcmpc_chx_rxidle(fsm_instance *fi, int event, void *arg)
 
 	fsm_event(priv->fsm, DEV_EVENT_RXUP, dev);
 done:
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit: %s  %s()\n",
-					dev->name, __FUNCTION__);
 	return;
 }
 
@@ -1616,13 +1583,9 @@ static void ctcmpc_chx_attn(fsm_instance *fsm, int event, void *arg)
 	struct ctcm_priv  *priv   = dev->priv;
 	struct mpc_group  *grp = priv->mpcg;
 
-	if (do_debug) {
-		ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s"
-				"GrpState:%s ChState:%s\n",
-				__FUNCTION__, smp_processor_id(), ch, ch->id,
-		fsm_getstate_str(grp->fsm),
-		fsm_getstate_str(ch->fsm));
-	}
+	CTCM_PR_DEBUG("%s(%s): %s(ch=0x%p), cp=%i, ChStat:%s, GrpStat:%s\n",
+		__func__, dev->name, ch->id, ch, smp_processor_id(),
+			fsm_getstate_str(ch->fsm), fsm_getstate_str(grp->fsm));
 
 	switch (fsm_getstate(grp->fsm)) {
 	case MPCG_STATE_XID2INITW:
@@ -1664,11 +1627,7 @@ static void ctcmpc_chx_attn(fsm_instance *fsm, int event, void *arg)
 		break;
 	}
 
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit : %s(): cp=%i ch=0x%p id=%s\n",
-			__FUNCTION__, smp_processor_id(), ch, ch->id);
 	return;
-
 }
 
 /*
@@ -1683,11 +1642,9 @@ static void ctcmpc_chx_attnbusy(fsm_instance *fsm, int event, void *arg)
 	struct ctcm_priv  *priv   = dev->priv;
 	struct mpc_group  *grp    = priv->mpcg;
 
-	ctcm_pr_debug("ctcmpc enter: %s  %s() %s  \nGrpState:%s ChState:%s\n",
-		       dev->name,
-		       __FUNCTION__, ch->id,
-		       fsm_getstate_str(grp->fsm),
-		       fsm_getstate_str(ch->fsm));
+	CTCM_PR_DEBUG("%s(%s): %s\n  ChState:%s GrpState:%s\n",
+			__func__, dev->name, ch->id,
+			fsm_getstate_str(ch->fsm), fsm_getstate_str(grp->fsm));
 
 	fsm_deltimer(&ch->timer);
 
@@ -1750,16 +1707,12 @@ static void ctcmpc_chx_attnbusy(fsm_instance *fsm, int event, void *arg)
 	if (ch->in_mpcgroup)
 		fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch);
 	else
-		printk(KERN_WARNING "ctcmpc: %s() Not all channels have"
-			" been added to group\n", __FUNCTION__);
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): channel %s not added to group",
+				CTCM_FUNTAIL, dev->name, ch->id);
 
 done:
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit : %s()%s ch=0x%p id=%s\n",
-				__FUNCTION__, dev->name, ch, ch->id);
-
 	return;
-
 }
 
 /*
@@ -1774,13 +1727,7 @@ static void ctcmpc_chx_resend(fsm_instance *fsm, int event, void *arg)
 	struct ctcm_priv   *priv   = dev->priv;
 	struct mpc_group   *grp    = priv->mpcg;
 
-	ctcm_pr_debug("ctcmpc enter: %s  %s() %s  \nGrpState:%s ChState:%s\n",
-		       dev->name, __FUNCTION__, ch->id,
-		       fsm_getstate_str(grp->fsm),
-		       fsm_getstate_str(ch->fsm));
-
 	fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch);
-
 	return;
 }
 
@@ -1802,19 +1749,16 @@ static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg)
 	int rc = 0;
 	unsigned long saveflags = 0;
 
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n",
-			__FUNCTION__, smp_processor_id(), ach, ach->id);
+	CTCM_PR_DEBUG("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n",
+			__func__, smp_processor_id(), ach, ach->id);
 
 	if (grp->in_sweep == 0)
 				goto done;
 
-	if (do_debug_data) {
-		ctcm_pr_debug("ctcmpc: %s() 1: ToVTAM_th_seq= %08x\n" ,
-			       __FUNCTION__, wch->th_seq_num);
-		ctcm_pr_debug("ctcmpc: %s() 1: FromVTAM_th_seq= %08x\n" ,
-				__FUNCTION__, rch->th_seq_num);
-	}
+	CTCM_PR_DBGDATA("%s: 1: ToVTAM_th_seq= %08x\n" ,
+				__func__, wch->th_seq_num);
+	CTCM_PR_DBGDATA("%s: 1: FromVTAM_th_seq= %08x\n" ,
+				__func__, rch->th_seq_num);
 
 	if (fsm_getstate(wch->fsm) != CTC_STATE_TXIDLE) {
 		/* give the previous IO time to complete */
@@ -1853,11 +1797,9 @@ static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg)
 
 	header->sw.th_last_seq = wch->th_seq_num;
 
-	if (do_debug_ccw)
-		ctcmpc_dumpit((char *)&wch->ccw[3], sizeof(struct ccw1) * 3);
-
-	ctcm_pr_debug("ctcmpc: %s() sweep packet\n", __FUNCTION__);
-	ctcmpc_dumpit((char *)header, TH_SWEEP_LENGTH);
+	CTCM_CCW_DUMP((char *)&wch->ccw[3], sizeof(struct ccw1) * 3);
+	CTCM_PR_DBGDATA("%s: sweep packet\n", __func__);
+	CTCM_D3_DUMP((char *)header, TH_SWEEP_LENGTH);
 
 	fsm_addtimer(&wch->timer, CTCM_TIME_5_SEC, CTC_EVENT_TIMER, wch);
 	fsm_newstate(wch->fsm, CTC_STATE_TX);
@@ -1876,19 +1818,13 @@ static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg)
 		ctcm_clear_busy_do(dev);
 	}
 
-	if (do_debug_data) {
-		ctcm_pr_debug("ctcmpc: %s()2: ToVTAM_th_seq= %08x\n" ,
-			       __FUNCTION__, wch->th_seq_num);
-		ctcm_pr_debug("ctcmpc: %s()2: FromVTAM_th_seq= %08x\n" ,
-			       __FUNCTION__, rch->th_seq_num);
-	}
+	CTCM_PR_DBGDATA("%s: To-/From-VTAM_th_seq = %08x/%08x\n" ,
+			__func__, wch->th_seq_num, rch->th_seq_num);
 
 	if (rc != 0)
 		ctcm_ccw_check_rc(wch, rc, "send sweep");
 
 done:
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit:  %s() %s\n", __FUNCTION__, ach->id);
 	return;
 }
 
@@ -2149,9 +2085,8 @@ static void dev_action_stop(fsm_instance *fi, int event, void *arg)
 		struct channel *ch = priv->channel[direction];
 		fsm_event(ch->fsm, CTC_EVENT_STOP, ch);
 		ch->th_seq_num = 0x00;
-	if (do_debug)
-		ctcm_pr_debug("ctcm: %s() CH_th_seq= %08x\n",
-				__FUNCTION__, ch->th_seq_num);
+		CTCM_PR_DEBUG("%s: CH_th_seq= %08x\n",
+				__func__, ch->th_seq_num);
 	}
 	if (IS_MPC(priv))
 		fsm_newstate(priv->mpcg->fsm, MPCG_STATE_RESET);
@@ -2199,8 +2134,11 @@ static void dev_action_chup(fsm_instance *fi, int event, void *arg)
 {
 	struct net_device *dev = arg;
 	struct ctcm_priv *priv = dev->priv;
+	int dev_stat = fsm_getstate(fi);
 
-	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
+	CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
+			"%s(%s): priv = %p [%d,%d]\n ",	CTCM_FUNTAIL,
+				dev->name, dev->priv, dev_stat, event);
 
 	switch (fsm_getstate(fi)) {
 	case DEV_STATE_STARTWAIT_RXTX:
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 6b13c1c1beb..126a3ebb8ab 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -84,20 +84,19 @@ void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 		skb_pull(pskb, LL_HEADER_LENGTH);
 		if ((ch->protocol == CTCM_PROTO_S390) &&
 		    (header->type != ETH_P_IP)) {
-
 			if (!(ch->logflags & LOG_FLAG_ILLEGALPKT)) {
+				ch->logflags |= LOG_FLAG_ILLEGALPKT;
 				/*
 				 * Check packet type only if we stick strictly
 				 * to S/390's protocol of OS390. This only
 				 * supports IP. Otherwise allow any packet
 				 * type.
 				 */
-				ctcm_pr_warn("%s Illegal packet type 0x%04x "
-						"received, dropping\n",
-						dev->name, header->type);
-				ch->logflags |= LOG_FLAG_ILLEGALPKT;
+				CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+					"%s(%s): Illegal packet type 0x%04x"
+					" - dropping",
+					CTCM_FUNTAIL, dev->name, header->type);
 			}
-
 			priv->stats.rx_dropped++;
 			priv->stats.rx_frame_errors++;
 			return;
@@ -105,11 +104,11 @@ void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 		pskb->protocol = ntohs(header->type);
 		if (header->length <= LL_HEADER_LENGTH) {
 			if (!(ch->logflags & LOG_FLAG_ILLEGALSIZE)) {
-				ctcm_pr_warn(
-					"%s Illegal packet size %d "
-					"received (MTU=%d blocklen=%d), "
-					"dropping\n", dev->name, header->length,
-					dev->mtu, len);
+				CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+					"%s(%s): Illegal packet size %d(%d,%d)"
+					"- dropping",
+					CTCM_FUNTAIL, dev->name,
+					header->length, dev->mtu, len);
 				ch->logflags |= LOG_FLAG_ILLEGALSIZE;
 			}
 
@@ -122,10 +121,10 @@ void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 		if ((header->length > skb_tailroom(pskb)) ||
 			(header->length > len)) {
 			if (!(ch->logflags & LOG_FLAG_OVERRUN)) {
-				ctcm_pr_warn(
-					"%s Illegal packet size %d (beyond the"
-					" end of received data), dropping\n",
-					dev->name, header->length);
+				CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+					"%s(%s): Packet size %d (overrun)"
+					" - dropping", CTCM_FUNTAIL,
+						dev->name, header->length);
 				ch->logflags |= LOG_FLAG_OVERRUN;
 			}
 
@@ -139,9 +138,9 @@ void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 		skb = dev_alloc_skb(pskb->len);
 		if (!skb) {
 			if (!(ch->logflags & LOG_FLAG_NOMEM)) {
-				ctcm_pr_warn(
-					"%s Out of memory in ctcm_unpack_skb\n",
-					dev->name);
+				CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+					"%s(%s): MEMORY allocation error",
+						CTCM_FUNTAIL, dev->name);
 				ch->logflags |= LOG_FLAG_NOMEM;
 			}
 			priv->stats.rx_dropped++;
@@ -184,7 +183,7 @@ void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb)
  */
 static void channel_free(struct channel *ch)
 {
-	CTCM_DBF_TEXT(TRACE, 2, __FUNCTION__);
+	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s(%s)", CTCM_FUNTAIL, ch->id);
 	ch->flags &= ~CHANNEL_FLAGS_INUSE;
 	fsm_newstate(ch->fsm, CTC_STATE_IDLE);
 }
@@ -251,19 +250,12 @@ static struct channel *channel_get(enum channel_types type,
 {
 	struct channel *ch = channels;
 
-	if (do_debug) {
-		char buf[64];
-		sprintf(buf, "%s(%d, %s, %d)\n",
-				CTCM_FUNTAIL, type, id, direction);
-		CTCM_DBF_TEXT(TRACE, CTC_DBF_INFO, buf);
-	}
 	while (ch && (strncmp(ch->id, id, CTCM_ID_SIZE) || (ch->type != type)))
 		ch = ch->next;
 	if (!ch) {
-		char buf[64];
-		sprintf(buf, "%s(%d, %s, %d) not found in channel list\n",
+		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+				"%s(%d, %s, %d) not found in channel list\n",
 				CTCM_FUNTAIL, type, id, direction);
-		CTCM_DBF_TEXT(ERROR, CTC_DBF_ERROR, buf);
 	} else {
 		if (ch->flags & CHANNEL_FLAGS_INUSE)
 			ch = NULL;
@@ -283,8 +275,9 @@ static long ctcm_check_irb_error(struct ccw_device *cdev, struct irb *irb)
 	if (!IS_ERR(irb))
 		return 0;
 
-	CTCM_DBF_TEXT_(ERROR, CTC_DBF_WARN, "irb error %ld on device %s\n",
-			PTR_ERR(irb), cdev->dev.bus_id);
+	CTCM_DBF_TEXT_(ERROR, CTC_DBF_WARN,
+			"irb error %ld on device %s\n",
+				PTR_ERR(irb), cdev->dev.bus_id);
 
 	switch (PTR_ERR(irb)) {
 	case -EIO:
@@ -307,58 +300,85 @@ static long ctcm_check_irb_error(struct ccw_device *cdev, struct irb *irb)
  *  ch		The channel, the sense code belongs to.
  *  sense	The sense code to inspect.
  */
-static inline void ccw_unit_check(struct channel *ch, unsigned char sense)
+static inline void ccw_unit_check(struct channel *ch, __u8 sense)
 {
-	CTCM_DBF_TEXT(TRACE, 5, __FUNCTION__);
+	CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG,
+			"%s(%s): %02x",
+				CTCM_FUNTAIL, ch->id, sense);
+
 	if (sense & SNS0_INTERVENTION_REQ) {
 		if (sense & 0x01) {
-			ctcm_pr_debug("%s: Interface disc. or Sel. reset "
-					"(remote)\n", ch->id);
+			if (ch->sense_rc != 0x01) {
+				ctcm_pr_debug("%s: Interface disc. or Sel. "
+					      "reset (remote)\n", ch->id);
+				ch->sense_rc = 0x01;
+			}
 			fsm_event(ch->fsm, CTC_EVENT_UC_RCRESET, ch);
 		} else {
-			ctcm_pr_debug("%s: System reset (remote)\n", ch->id);
+			if (ch->sense_rc != SNS0_INTERVENTION_REQ) {
+				ctcm_pr_debug("%s: System reset (remote)\n",
+					      ch->id);
+				ch->sense_rc = SNS0_INTERVENTION_REQ;
+			}
 			fsm_event(ch->fsm, CTC_EVENT_UC_RSRESET, ch);
 		}
 	} else if (sense & SNS0_EQUIPMENT_CHECK) {
 		if (sense & SNS0_BUS_OUT_CHECK) {
-			ctcm_pr_warn("%s: Hardware malfunction (remote)\n",
-				ch->id);
+			if (ch->sense_rc != SNS0_BUS_OUT_CHECK) {
+				CTCM_DBF_TEXT_(TRACE, CTC_DBF_WARN,
+					"%s(%s): remote HW error %02x",
+						CTCM_FUNTAIL, ch->id, sense);
+				ch->sense_rc = SNS0_BUS_OUT_CHECK;
+			}
 			fsm_event(ch->fsm, CTC_EVENT_UC_HWFAIL, ch);
 		} else {
-			ctcm_pr_warn("%s: Read-data parity error (remote)\n",
-				ch->id);
+			if (ch->sense_rc != SNS0_EQUIPMENT_CHECK) {
+				CTCM_DBF_TEXT_(TRACE, CTC_DBF_WARN,
+					"%s(%s): remote read parity error %02x",
+						CTCM_FUNTAIL, ch->id, sense);
+				ch->sense_rc = SNS0_EQUIPMENT_CHECK;
+			}
 			fsm_event(ch->fsm, CTC_EVENT_UC_RXPARITY, ch);
 		}
 	} else if (sense & SNS0_BUS_OUT_CHECK) {
-		if (sense & 0x04) {
-			ctcm_pr_warn("%s: Data-streaming timeout)\n", ch->id);
+		if (ch->sense_rc != SNS0_BUS_OUT_CHECK) {
+			CTCM_DBF_TEXT_(TRACE, CTC_DBF_WARN,
+				"%s(%s): BUS OUT error %02x",
+					CTCM_FUNTAIL, ch->id, sense);
+			ch->sense_rc = SNS0_BUS_OUT_CHECK;
+		}
+		if (sense & 0x04)	/* data-streaming timeout */
 			fsm_event(ch->fsm, CTC_EVENT_UC_TXTIMEOUT, ch);
-		} else {
-			ctcm_pr_warn("%s: Data-transfer parity error\n",
-					ch->id);
+		else			/* Data-transfer parity error */
 			fsm_event(ch->fsm, CTC_EVENT_UC_TXPARITY, ch);
-		}
 	} else if (sense & SNS0_CMD_REJECT) {
-		ctcm_pr_warn("%s: Command reject\n", ch->id);
+		if (ch->sense_rc != SNS0_CMD_REJECT) {
+			CTCM_DBF_TEXT_(TRACE, CTC_DBF_WARN,
+				"%s(%s): Command rejected",
+						CTCM_FUNTAIL, ch->id);
+			ch->sense_rc = SNS0_CMD_REJECT;
+		}
 	} else if (sense == 0) {
-		ctcm_pr_debug("%s: Unit check ZERO\n", ch->id);
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_WARN,
+			"%s(%s): Unit check ZERO",
+					CTCM_FUNTAIL, ch->id);
 		fsm_event(ch->fsm, CTC_EVENT_UC_ZERO, ch);
 	} else {
-		ctcm_pr_warn("%s: Unit Check with sense code: %02x\n",
-			    ch->id, sense);
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_WARN,
+			"%s(%s): Unit check code %02x unknown",
+					CTCM_FUNTAIL, ch->id, sense);
 		fsm_event(ch->fsm, CTC_EVENT_UC_UNKNOWN, ch);
 	}
 }
 
 int ctcm_ch_alloc_buffer(struct channel *ch)
 {
-	CTCM_DBF_TEXT(TRACE, 5, __FUNCTION__);
-
 	clear_normalized_cda(&ch->ccw[1]);
 	ch->trans_skb = __dev_alloc_skb(ch->max_bufsize, GFP_ATOMIC | GFP_DMA);
 	if (ch->trans_skb == NULL) {
-		ctcm_pr_warn("%s: Couldn't alloc %s trans_skb\n",
-			ch->id,
+		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+			"%s(%s): %s trans_skb allocation error",
+			CTCM_FUNTAIL, ch->id,
 			(CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX");
 		return -ENOMEM;
 	}
@@ -367,9 +387,9 @@ int ctcm_ch_alloc_buffer(struct channel *ch)
 	if (set_normalized_cda(&ch->ccw[1], ch->trans_skb->data)) {
 		dev_kfree_skb(ch->trans_skb);
 		ch->trans_skb = NULL;
-		ctcm_pr_warn("%s: set_normalized_cda for %s "
-			"trans_skb failed, dropping packets\n",
-			ch->id,
+		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+			"%s(%s): %s set norm_cda failed",
+			CTCM_FUNTAIL, ch->id,
 			(CHANNEL_DIRECTION(ch->flags) == READ) ? "RX" : "TX");
 		return -ENOMEM;
 	}
@@ -516,7 +536,7 @@ static int ctcm_transmit_skb(struct channel *ch, struct sk_buff *skb)
 			atomic_dec(&skb->users);
 			skb_pull(skb, LL_HEADER_LENGTH + 2);
 			ctcm_clear_busy(ch->netdev);
-			return -EBUSY;
+			return -ENOMEM;
 		}
 
 		skb_reset_tail_pointer(ch->trans_skb);
@@ -570,15 +590,12 @@ static void ctcmpc_send_sweep_req(struct channel *rch)
 	struct th_sweep *header;
 	struct sk_buff *sweep_skb;
 	struct channel *ch;
-	int rc = 0;
+	/* int rc = 0; */
 
 	priv = dev->priv;
 	grp = priv->mpcg;
 	ch = priv->channel[WRITE];
 
-	if (do_debug)
-		MPC_DBF_DEV_NAME(TRACE, dev, ch->id);
-
 	/* sweep processing is not complete until response and request */
 	/* has completed for all read channels in group		       */
 	if (grp->in_sweep == 0) {
@@ -590,17 +607,16 @@ static void ctcmpc_send_sweep_req(struct channel *rch)
 	sweep_skb = __dev_alloc_skb(MPC_BUFSIZE_DEFAULT, GFP_ATOMIC|GFP_DMA);
 
 	if (sweep_skb == NULL)	{
-		printk(KERN_INFO "Couldn't alloc sweep_skb\n");
-		rc = -ENOMEM;
-					goto done;
+		/* rc = -ENOMEM; */
+				goto nomem;
 	}
 
 	header = kmalloc(TH_SWEEP_LENGTH, gfp_type());
 
 	if (!header) {
 		dev_kfree_skb_any(sweep_skb);
-		rc = -ENOMEM;
-					goto done;
+		/* rc = -ENOMEM; */
+				goto nomem;
 	}
 
 	header->th.th_seg	= 0x00 ;
@@ -621,12 +637,10 @@ static void ctcmpc_send_sweep_req(struct channel *rch)
 
 	return;
 
-done:
-	if (rc != 0) {
-		grp->in_sweep = 0;
-		ctcm_clear_busy(dev);
-		fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
-	}
+nomem:
+	grp->in_sweep = 0;
+	ctcm_clear_busy(dev);
+	fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
 
 	return;
 }
@@ -648,11 +662,9 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 	unsigned long saveflags = 0;	/* avoids compiler warning */
 	__u16 block_len;
 
-	if (do_debug)
-		ctcm_pr_debug(
-			"ctcm enter: %s(): %s cp=%i ch=0x%p id=%s state=%s\n",
-			__FUNCTION__, dev->name, smp_processor_id(), ch,
-			ch->id, fsm_getstate_str(ch->fsm));
+	CTCM_PR_DEBUG("Enter %s: %s, cp=%i ch=0x%p id=%s state=%s\n",
+			__func__, dev->name, smp_processor_id(), ch,
+					ch->id, fsm_getstate_str(ch->fsm));
 
 	if ((fsm_getstate(ch->fsm) != CTC_STATE_TXIDLE) || grp->in_sweep) {
 		spin_lock_irqsave(&ch->collect_lock, saveflags);
@@ -660,14 +672,8 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 		p_header = kmalloc(PDU_HEADER_LENGTH, gfp_type());
 
 		if (!p_header) {
-			printk(KERN_WARNING "ctcm: OUT OF MEMORY IN %s():"
-			       " Data Lost \n", __FUNCTION__);
-
-			atomic_dec(&skb->users);
-			dev_kfree_skb_any(skb);
 			spin_unlock_irqrestore(&ch->collect_lock, saveflags);
-			fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev);
-					goto done;
+				goto nomem_exit;
 		}
 
 		p_header->pdu_offset = skb->len;
@@ -682,13 +688,10 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 		memcpy(skb_push(skb, PDU_HEADER_LENGTH), p_header,
 		       PDU_HEADER_LENGTH);
 
-		if (do_debug_data) {
-			ctcm_pr_debug("ctcm: %s() Putting on collect_q"
-			       " - skb len: %04x \n", __FUNCTION__, skb->len);
-			ctcm_pr_debug("ctcm: %s() pdu header and data"
-			       " for up to 32 bytes\n", __FUNCTION__);
-			ctcmpc_dump32((char *)skb->data, skb->len);
-		}
+		CTCM_PR_DEBUG("%s(%s): Put on collect_q - skb len: %04x \n"
+				"pdu header and data for up to 32 bytes:\n",
+				__func__, dev->name, skb->len);
+		CTCM_D3_DUMP((char *)skb->data, min_t(int, 32, skb->len));
 
 		skb_queue_tail(&ch->collect_queue, skb);
 		ch->collect_len += skb->len;
@@ -713,12 +716,7 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 	if (hi) {
 		nskb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
 		if (!nskb) {
-			printk(KERN_WARNING "ctcm: %s() OUT OF MEMORY"
-				"-  Data Lost \n", __FUNCTION__);
-			atomic_dec(&skb->users);
-			dev_kfree_skb_any(skb);
-			fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev);
-				goto done;
+			goto nomem_exit;
 		} else {
 			memcpy(skb_put(nskb, skb->len), skb->data, skb->len);
 			atomic_inc(&nskb->users);
@@ -730,15 +728,8 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 
 	p_header = kmalloc(PDU_HEADER_LENGTH, gfp_type());
 
-	if (!p_header) {
-		printk(KERN_WARNING "ctcm: %s() OUT OF MEMORY"
-		       ": Data Lost \n", __FUNCTION__);
-
-		atomic_dec(&skb->users);
-		dev_kfree_skb_any(skb);
-		fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev);
-				goto done;
-	}
+	if (!p_header)
+		goto nomem_exit;
 
 	p_header->pdu_offset = skb->len;
 	p_header->pdu_proto = 0x01;
@@ -768,15 +759,8 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 	ch->prof.txlen += skb->len - PDU_HEADER_LENGTH;
 
 	header = kmalloc(TH_HEADER_LENGTH, gfp_type());
-
-	if (!header) {
-		printk(KERN_WARNING "ctcm: %s() OUT OF MEMORY: Data Lost \n",
-				__FUNCTION__);
-		atomic_dec(&skb->users);
-		dev_kfree_skb_any(skb);
-		fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev);
-				goto done;
-	}
+	if (!header)
+		goto nomem_exit;
 
 	header->th_seg = 0x00;
 	header->th_ch_flag = TH_HAS_PDU;  /* Normal data */
@@ -785,41 +769,31 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 	ch->th_seq_num++;
 	header->th_seq_num = ch->th_seq_num;
 
-	if (do_debug_data)
-		ctcm_pr_debug("ctcm: %s() ToVTAM_th_seq= %08x\n" ,
-		       __FUNCTION__, ch->th_seq_num);
+	CTCM_PR_DBGDATA("%s(%s) ToVTAM_th_seq= %08x\n" ,
+		       __func__, dev->name, ch->th_seq_num);
 
 	/* put the TH on the packet */
 	memcpy(skb_push(skb, TH_HEADER_LENGTH), header, TH_HEADER_LENGTH);
 
 	kfree(header);
 
-	if (do_debug_data) {
-		ctcm_pr_debug("ctcm: %s(): skb len: %04x \n",
-				__FUNCTION__, skb->len);
-		ctcm_pr_debug("ctcm: %s(): pdu header and data for up to 32 "
-				"bytes sent to vtam\n", __FUNCTION__);
-		ctcmpc_dump32((char *)skb->data, skb->len);
-	}
+	CTCM_PR_DBGDATA("%s(%s): skb len: %04x\n - pdu header and data for "
+			"up to 32 bytes sent to vtam:\n",
+				__func__, dev->name, skb->len);
+	CTCM_D3_DUMP((char *)skb->data, min_t(int, 32, skb->len));
 
 	ch->ccw[4].count = skb->len;
 	if (set_normalized_cda(&ch->ccw[4], skb->data)) {
 		/*
-		 * idal allocation failed, try via copying to
-		 * trans_skb. trans_skb usually has a pre-allocated
-		 * idal.
+		 * idal allocation failed, try via copying to trans_skb.
+		 * trans_skb usually has a pre-allocated idal.
 		 */
 		if (ctcm_checkalloc_buffer(ch)) {
 			/*
-			 * Remove our header. It gets added
-			 * again on retransmit.
+			 * Remove our header.
+			 * It gets added again on retransmit.
 			 */
-			atomic_dec(&skb->users);
-			dev_kfree_skb_any(skb);
-			printk(KERN_WARNING "ctcm: %s()OUT OF MEMORY:"
-					" Data Lost \n", __FUNCTION__);
-			fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev);
-				goto done;
+				goto nomem_exit;
 		}
 
 		skb_reset_tail_pointer(ch->trans_skb);
@@ -829,14 +803,11 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 		atomic_dec(&skb->users);
 		dev_kfree_skb_irq(skb);
 		ccw_idx = 0;
-		if (do_debug_data) {
-			ctcm_pr_debug("ctcm: %s() TRANS skb len: %d \n",
-			       __FUNCTION__, ch->trans_skb->len);
-			ctcm_pr_debug("ctcm: %s up to 32 bytes of data"
-				" sent to vtam\n", __FUNCTION__);
-			ctcmpc_dump32((char *)ch->trans_skb->data,
-					ch->trans_skb->len);
-		}
+		CTCM_PR_DBGDATA("%s(%s): trans_skb len: %04x\n"
+				"up to 32 bytes sent to vtam:\n",
+				__func__, dev->name, ch->trans_skb->len);
+		CTCM_D3_DUMP((char *)ch->trans_skb->data,
+				min_t(int, 32, ch->trans_skb->len));
 	} else {
 		skb_queue_tail(&ch->io_queue, skb);
 		ccw_idx = 3;
@@ -865,13 +836,21 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 		priv->stats.tx_packets++;
 		priv->stats.tx_bytes += skb->len - TH_HEADER_LENGTH;
 	}
-	if (ch->th_seq_num > 0xf0000000)	/* Chose 4Billion at random. */
+	if (ch->th_seq_num > 0xf0000000)	/* Chose at random. */
 		ctcmpc_send_sweep_req(ch);
 
+	goto done;
+nomem_exit:
+	CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_CRIT,
+			"%s(%s): MEMORY allocation ERROR\n",
+			CTCM_FUNTAIL, ch->id);
+	rc = -ENOMEM;
+	atomic_dec(&skb->users);
+	dev_kfree_skb_any(skb);
+	fsm_event(priv->mpcg->fsm, MPCG_EVENT_INOP, dev);
 done:
-	if (do_debug)
-		ctcm_pr_debug("ctcm exit: %s  %s()\n", dev->name, __FUNCTION__);
-	return 0;
+	CTCM_PR_DEBUG("Exit %s(%s)\n", __func__, dev->name);
+	return rc;
 }
 
 /**
@@ -888,20 +867,19 @@ done:
 /* first merge version - leaving both functions separated */
 static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	int rc = 0;
-	struct ctcm_priv *priv;
-
-	CTCM_DBF_TEXT(TRACE, 5, __FUNCTION__);
-	priv = dev->priv;
+	struct ctcm_priv *priv = dev->priv;
 
 	if (skb == NULL) {
-		ctcm_pr_warn("%s: NULL sk_buff passed\n", dev->name);
+		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+				"%s(%s): NULL sk_buff passed",
+					CTCM_FUNTAIL, dev->name);
 		priv->stats.tx_dropped++;
 		return 0;
 	}
 	if (skb_headroom(skb) < (LL_HEADER_LENGTH + 2)) {
-		ctcm_pr_warn("%s: Got sk_buff with head room < %ld bytes\n",
-			    dev->name, LL_HEADER_LENGTH + 2);
+		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+			"%s(%s): Got sk_buff with head room < %ld bytes",
+			CTCM_FUNTAIL, dev->name, LL_HEADER_LENGTH + 2);
 		dev_kfree_skb(skb);
 		priv->stats.tx_dropped++;
 		return 0;
@@ -925,51 +903,43 @@ static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 
 	dev->trans_start = jiffies;
 	if (ctcm_transmit_skb(priv->channel[WRITE], skb) != 0)
-		rc = 1;
-	return rc;
+		return 1;
+	return 0;
 }
 
 /* unmerged MPC variant of ctcm_tx */
 static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	int len = 0;
-	struct ctcm_priv *priv = NULL;
-	struct mpc_group *grp  = NULL;
+	struct ctcm_priv *priv = dev->priv;
+	struct mpc_group *grp  = priv->mpcg;
 	struct sk_buff *newskb = NULL;
 
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc enter: %s(): skb:%0lx\n",
-			__FUNCTION__, (unsigned long)skb);
-
-	CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
-			"ctcmpc enter: %s(): skb:%0lx\n",
-			__FUNCTION__, (unsigned long)skb);
-
-	priv = dev->priv;
-	grp  = priv->mpcg;
 	/*
 	 * Some sanity checks ...
 	 */
 	if (skb == NULL) {
-		ctcm_pr_warn("ctcmpc: %s: NULL sk_buff passed\n", dev->name);
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): NULL sk_buff passed",
+					CTCM_FUNTAIL, dev->name);
 		priv->stats.tx_dropped++;
 					goto done;
 	}
 	if (skb_headroom(skb) < (TH_HEADER_LENGTH + PDU_HEADER_LENGTH)) {
-		CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_WARN,
-			"%s: Got sk_buff with head room < %ld bytes\n",
-			dev->name, TH_HEADER_LENGTH + PDU_HEADER_LENGTH);
+		CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_ERROR,
+			"%s(%s): Got sk_buff with head room < %ld bytes",
+			CTCM_FUNTAIL, dev->name,
+				TH_HEADER_LENGTH + PDU_HEADER_LENGTH);
 
-		if (do_debug_data)
-			ctcmpc_dump32((char *)skb->data, skb->len);
+		CTCM_D3_DUMP((char *)skb->data, min_t(int, 32, skb->len));
 
 		len =  skb->len + TH_HEADER_LENGTH + PDU_HEADER_LENGTH;
 		newskb = __dev_alloc_skb(len, gfp_type() | GFP_DMA);
 
 		if (!newskb) {
-			printk(KERN_WARNING "ctcmpc: %s() OUT OF MEMORY-"
-			       "Data Lost\n",
-			       __FUNCTION__);
+			CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_ERROR,
+				"%s: %s: __dev_alloc_skb failed",
+						__func__, dev->name);
 
 			dev_kfree_skb_any(skb);
 			priv->stats.tx_dropped++;
@@ -993,9 +963,9 @@ static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
 	if ((fsm_getstate(priv->fsm) != DEV_STATE_RUNNING) ||
 	   (fsm_getstate(grp->fsm) <  MPCG_STATE_XID2INITW)) {
 		dev_kfree_skb_any(skb);
-		printk(KERN_INFO "ctcmpc: %s() DATA RCVD - MPC GROUP "
-		       "NOT ACTIVE - DROPPED\n",
-		       __FUNCTION__);
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): inactive MPCGROUP - dropped",
+					CTCM_FUNTAIL, dev->name);
 		priv->stats.tx_dropped++;
 		priv->stats.tx_errors++;
 		priv->stats.tx_carrier_errors++;
@@ -1003,8 +973,9 @@ static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	if (ctcm_test_and_set_busy(dev)) {
-		printk(KERN_WARNING "%s:DEVICE ERR - UNRECOVERABLE DATA LOSS\n",
-		       __FUNCTION__);
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): device busy - dropped",
+					CTCM_FUNTAIL, dev->name);
 		dev_kfree_skb_any(skb);
 		priv->stats.tx_dropped++;
 		priv->stats.tx_errors++;
@@ -1015,12 +986,9 @@ static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
 
 	dev->trans_start = jiffies;
 	if (ctcmpc_transmit_skb(priv->channel[WRITE], skb) != 0) {
-		printk(KERN_WARNING "ctcmpc: %s() DEVICE ERROR"
-		       ": Data Lost \n",
-		       __FUNCTION__);
-		printk(KERN_WARNING "ctcmpc: %s() DEVICE ERROR"
-		       " - UNRECOVERABLE DATA LOSS\n",
-		       __FUNCTION__);
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): device error - dropped",
+					CTCM_FUNTAIL, dev->name);
 		dev_kfree_skb_any(skb);
 		priv->stats.tx_dropped++;
 		priv->stats.tx_errors++;
@@ -1054,8 +1022,6 @@ static int ctcm_change_mtu(struct net_device *dev, int new_mtu)
 	struct ctcm_priv *priv;
 	int max_bufsize;
 
-	CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__);
-
 	if (new_mtu < 576 || new_mtu > 65527)
 		return -EINVAL;
 
@@ -1087,30 +1053,13 @@ static struct net_device_stats *ctcm_stats(struct net_device *dev)
 	return &((struct ctcm_priv *)dev->priv)->stats;
 }
 
-
-static void ctcm_netdev_unregister(struct net_device *dev)
-{
-	CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__);
-	if (!dev)
-		return;
-	unregister_netdev(dev);
-}
-
-static int ctcm_netdev_register(struct net_device *dev)
-{
-	CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__);
-	return register_netdev(dev);
-}
-
 static void ctcm_free_netdevice(struct net_device *dev)
 {
 	struct ctcm_priv *priv;
 	struct mpc_group *grp;
 
-	CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__);
-
-	if (!dev)
-		return;
+	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
+			"%s(%s)", CTCM_FUNTAIL, dev->name);
 	priv = dev->priv;
 	if (priv) {
 		grp = priv->mpcg;
@@ -1171,7 +1120,9 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv)
 		dev = alloc_netdev(0, CTC_DEVICE_GENE, ctcm_dev_setup);
 
 	if (!dev) {
-		ctcm_pr_err("%s: Out of memory\n", __FUNCTION__);
+		CTCM_DBF_TEXT_(ERROR, CTC_DBF_CRIT,
+			"%s: MEMORY allocation ERROR",
+			CTCM_FUNTAIL);
 		return NULL;
 	}
 	dev->priv = priv;
@@ -1209,6 +1160,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv)
 	}
 
 	CTCMY_DBF_DEV(SETUP, dev, "finished");
+
 	return dev;
 }
 
@@ -1226,18 +1178,24 @@ static void ctcm_irq_handler(struct ccw_device *cdev,
 	struct net_device	*dev;
 	struct ctcm_priv	*priv;
 	struct ccwgroup_device	*cgdev;
+	int cstat;
+	int dstat;
+
+	CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG,
+		"Enter %s(%s)", CTCM_FUNTAIL, &cdev->dev.bus_id);
 
-	CTCM_DBF_TEXT(TRACE, CTC_DBF_DEBUG, __FUNCTION__);
 	if (ctcm_check_irb_error(cdev, irb))
 		return;
 
 	cgdev = dev_get_drvdata(&cdev->dev);
 
+	cstat = irb->scsw.cmd.cstat;
+	dstat = irb->scsw.cmd.dstat;
+
 	/* Check for unsolicited interrupts. */
 	if (cgdev == NULL) {
-		ctcm_pr_warn("ctcm: Got unsolicited irq: %s c-%02x d-%02x\n",
-			    cdev->dev.bus_id, irb->scsw.cmd.cstat,
-			    irb->scsw.cmd.dstat);
+		ctcm_pr_warn("ctcm: Got unsolicited irq: c-%02x d-%02x\n",
+			     cstat, dstat);
 		return;
 	}
 
@@ -1254,26 +1212,22 @@ static void ctcm_irq_handler(struct ccw_device *cdev,
 		return;
 	}
 
-	dev = (struct net_device *)(ch->netdev);
+	dev = ch->netdev;
 	if (dev == NULL) {
 		ctcm_pr_crit("ctcm: %s dev=NULL bus_id=%s, ch=0x%p\n",
-				__FUNCTION__, cdev->dev.bus_id, ch);
+				__func__, cdev->dev.bus_id, ch);
 		return;
 	}
 
-	if (do_debug)
-		ctcm_pr_debug("%s: interrupt for device: %s "
-				"received c-%02x d-%02x\n",
-				dev->name,
-				ch->id,
-				irb->scsw.cmd.cstat,
-				irb->scsw.cmd.dstat);
+	CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG,
+		"%s(%s): int. for %s: cstat=%02x dstat=%02x",
+			CTCM_FUNTAIL, dev->name, ch->id, cstat, dstat);
 
 	/* Copy interruption response block. */
 	memcpy(ch->irb, irb, sizeof(struct irb));
 
-	/* Check for good subchannel return code, otherwise error message */
 	if (irb->scsw.cmd.cstat) {
+	/* Check for good subchannel return code, otherwise error message */
 		fsm_event(ch->fsm, CTC_EVENT_SC_UNKNOWN, ch);
 		ctcm_pr_warn("%s: subchannel check for dev: %s - %02x %02x\n",
 			    dev->name, ch->id, irb->scsw.cmd.cstat,
@@ -1283,6 +1237,11 @@ static void ctcm_irq_handler(struct ccw_device *cdev,
 
 	/* Check the reason-code of a unit check */
 	if (irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) {
+		if ((irb->ecw[0] & ch->sense_rc) == 0)
+			/* print it only once */
+			CTCM_DBF_TEXT_(TRACE, CTC_DBF_INFO,
+				"%s(%s): sense=%02x, ds=%02x",
+				CTCM_FUNTAIL, ch->id, irb->ecw[0], dstat);
 		ccw_unit_check(ch, irb->ecw[0]);
 		return;
 	}
@@ -1320,14 +1279,18 @@ static int ctcm_probe_device(struct ccwgroup_device *cgdev)
 	struct ctcm_priv *priv;
 	int rc;
 
-	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s %p", __FUNCTION__, cgdev);
+	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
+			"%s %p",
+			__func__, cgdev);
 
 	if (!get_device(&cgdev->dev))
 		return -ENODEV;
 
 	priv = kzalloc(sizeof(struct ctcm_priv), GFP_KERNEL);
 	if (!priv) {
-		ctcm_pr_err("%s: Out of memory\n", __FUNCTION__);
+		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
+			"%s: memory allocation failure",
+			CTCM_FUNTAIL);
 		put_device(&cgdev->dev);
 		return -ENOMEM;
 	}
@@ -1364,10 +1327,13 @@ static int add_channel(struct ccw_device *cdev, enum channel_types type,
 	int ccw_num;
 	int rc = 0;
 
-	CTCM_DBF_TEXT(TRACE, 2, __FUNCTION__);
+	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
+		"%s(%s), type %d, proto %d",
+			__func__, cdev->dev.bus_id,	type, priv->protocol);
+
 	ch = kzalloc(sizeof(struct channel), GFP_KERNEL);
 	if (ch == NULL)
-					goto nomem_return;
+		return -ENOMEM;
 
 	ch->protocol = priv->protocol;
 	if (IS_MPC(priv)) {
@@ -1478,7 +1444,7 @@ static int add_channel(struct ccw_device *cdev, enum channel_types type,
 	if (*c && (!strncmp((*c)->id, ch->id, CTCM_ID_SIZE))) {
 		CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
 				"%s (%s) already in list, using old entry",
-				__FUNCTION__, (*c)->id);
+				__func__, (*c)->id);
 
 				goto free_return;
 	}
@@ -1498,11 +1464,10 @@ static int add_channel(struct ccw_device *cdev, enum channel_types type,
 	return 0;
 
 nomem_return:
-	ctcm_pr_warn("ctcm: Out of memory in %s\n", __FUNCTION__);
 	rc = -ENOMEM;
 
 free_return:	/* note that all channel pointers are 0 or valid */
-	kfree(ch->ccw);		/* TODO: check that again */
+	kfree(ch->ccw);
 	kfree(ch->discontact_th);
 	kfree_fsm(ch->fsm);
 	kfree(ch->irb);
@@ -1540,48 +1505,48 @@ static int ctcm_new_device(struct ccwgroup_device *cgdev)
 	enum channel_types type;
 	struct ctcm_priv *priv;
 	struct net_device *dev;
+	struct ccw_device *cdev0;
+	struct ccw_device *cdev1;
 	int ret;
 
-	CTCM_DBF_TEXT(SETUP, CTC_DBF_INFO, __FUNCTION__);
-
 	priv = dev_get_drvdata(&cgdev->dev);
 	if (!priv)
 		return -ENODEV;
 
-	type = get_channel_type(&cgdev->cdev[0]->id);
+	cdev0 = cgdev->cdev[0];
+	cdev1 = cgdev->cdev[1];
+
+	type = get_channel_type(&cdev0->id);
 
-	snprintf(read_id, CTCM_ID_SIZE, "ch-%s", cgdev->cdev[0]->dev.bus_id);
-	snprintf(write_id, CTCM_ID_SIZE, "ch-%s", cgdev->cdev[1]->dev.bus_id);
+	snprintf(read_id, CTCM_ID_SIZE, "ch-%s", cdev0->dev.bus_id);
+	snprintf(write_id, CTCM_ID_SIZE, "ch-%s", cdev1->dev.bus_id);
 
-	ret = add_channel(cgdev->cdev[0], type, priv);
+	ret = add_channel(cdev0, type, priv);
 	if (ret)
 		return ret;
-	ret = add_channel(cgdev->cdev[1], type, priv);
+	ret = add_channel(cdev1, type, priv);
 	if (ret)
 		return ret;
 
-	ret = ccw_device_set_online(cgdev->cdev[0]);
+	ret = ccw_device_set_online(cdev0);
 	if (ret != 0) {
-		CTCM_DBF_TEXT(SETUP, CTC_DBF_WARN,
-				"ccw_device_set_online (cdev[0]) failed ");
-		ctcm_pr_warn("ccw_device_set_online (cdev[0]) failed "
-				"with ret = %d\n", ret);
+		/* may be ok to fail now - can be done later */
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
+			"%s(%s) set_online rc=%d",
+				CTCM_FUNTAIL, read_id, ret);
 	}
 
-	ret = ccw_device_set_online(cgdev->cdev[1]);
+	ret = ccw_device_set_online(cdev1);
 	if (ret != 0) {
-		CTCM_DBF_TEXT(SETUP, CTC_DBF_WARN,
-				"ccw_device_set_online (cdev[1]) failed ");
-		ctcm_pr_warn("ccw_device_set_online (cdev[1]) failed "
-				"with ret = %d\n", ret);
+		/* may be ok to fail now - can be done later */
+		CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
+			"%s(%s) set_online rc=%d",
+				CTCM_FUNTAIL, write_id, ret);
 	}
 
 	dev = ctcm_init_netdevice(priv);
-
-	if (dev == NULL) {
-		ctcm_pr_warn("ctcm_init_netdevice failed\n");
-					goto out;
-	}
+	if (dev == NULL)
+			goto out;
 
 	for (direction = READ; direction <= WRITE; direction++) {
 		priv->channel[direction] =
@@ -1590,8 +1555,7 @@ static int ctcm_new_device(struct ccwgroup_device *cgdev)
 		if (priv->channel[direction] == NULL) {
 			if (direction == WRITE)
 				channel_free(priv->channel[READ]);
-			ctcm_free_netdevice(dev);
-					goto out;
+			goto out_dev;
 		}
 		priv->channel[direction]->netdev = dev;
 		priv->channel[direction]->protocol = priv->protocol;
@@ -1600,26 +1564,24 @@ static int ctcm_new_device(struct ccwgroup_device *cgdev)
 	/* sysfs magic */
 	SET_NETDEV_DEV(dev, &cgdev->dev);
 
-	if (ctcm_netdev_register(dev) != 0) {
-		ctcm_free_netdevice(dev);
-					goto out;
-	}
+	if (register_netdev(dev))
+			goto out_dev;
 
 	if (ctcm_add_attributes(&cgdev->dev)) {
-		ctcm_netdev_unregister(dev);
-/*		dev->priv = NULL;	why that ????	*/
-		ctcm_free_netdevice(dev);
-					goto out;
+		unregister_netdev(dev);
+			goto out_dev;
 	}
 
 	strlcpy(priv->fsm->name, dev->name, sizeof(priv->fsm->name));
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
-			"setup(%s) ok : r/w = %s / %s, proto : %d",
-			dev->name, priv->channel[READ]->id,
+		"setup(%s) OK : r/w = %s/%s, protocol : %d", dev->name,
+			priv->channel[READ]->id,
 			priv->channel[WRITE]->id, priv->protocol);
 
 	return 0;
+out_dev:
+	ctcm_free_netdevice(dev);
 out:
 	ccw_device_set_offline(cgdev->cdev[1]);
 	ccw_device_set_offline(cgdev->cdev[0]);
@@ -1658,8 +1620,7 @@ static int ctcm_shutdown_device(struct ccwgroup_device *cgdev)
 		channel_free(priv->channel[WRITE]);
 
 	if (dev) {
-		ctcm_netdev_unregister(dev);
-/*		dev->priv = NULL;	why that ???	*/
+		unregister_netdev(dev);
 		ctcm_free_netdevice(dev);
 	}
 
@@ -1682,13 +1643,16 @@ static int ctcm_shutdown_device(struct ccwgroup_device *cgdev)
 
 static void ctcm_remove_device(struct ccwgroup_device *cgdev)
 {
-	struct ctcm_priv *priv;
+	struct ctcm_priv *priv = dev_get_drvdata(&cgdev->dev);
 
-	CTCM_DBF_TEXT(SETUP, CTC_DBF_ERROR, __FUNCTION__);
+	BUG_ON(priv == NULL);
+
+	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
+			"removing device %s, r/w = %s/%s, proto : %d",
+			priv->channel[READ]->netdev->name,
+			priv->channel[READ]->id, priv->channel[WRITE]->id,
+			priv->protocol);
 
-	priv = dev_get_drvdata(&cgdev->dev);
-	if (!priv)
-		return;
 	if (cgdev->state == CCWGROUP_ONLINE)
 		ctcm_shutdown_device(cgdev);
 	ctcm_remove_files(&cgdev->dev);
@@ -1748,8 +1712,6 @@ static int __init ctcm_init(void)
 
 	ret = ctcm_register_dbf_views();
 	if (ret) {
-		ctcm_pr_crit("ctcm_init failed with ctcm_register_dbf_views "
-				"rc = %d\n", ret);
 		return ret;
 	}
 	ret = register_cu3088_discipline(&ctcm_group_driver);
diff --git a/drivers/s390/net/ctcm_main.h b/drivers/s390/net/ctcm_main.h
index 95b0c0b6ebc..a72e0feeb27 100644
--- a/drivers/s390/net/ctcm_main.h
+++ b/drivers/s390/net/ctcm_main.h
@@ -22,9 +22,9 @@
 
 #define CTC_DRIVER_NAME	"ctcm"
 #define CTC_DEVICE_NAME	"ctc"
-#define CTC_DEVICE_GENE	"ctc%d"
 #define MPC_DEVICE_NAME	"mpc"
-#define MPC_DEVICE_GENE	"mpc%d"
+#define CTC_DEVICE_GENE CTC_DEVICE_NAME "%d"
+#define MPC_DEVICE_GENE	MPC_DEVICE_NAME "%d"
 
 #define CHANNEL_FLAGS_READ	0
 #define CHANNEL_FLAGS_WRITE	1
@@ -48,6 +48,30 @@
 #define ctcm_pr_err(fmt, arg...) printk(KERN_ERR fmt, ##arg)
 #define ctcm_pr_crit(fmt, arg...) printk(KERN_CRIT fmt, ##arg)
 
+#define CTCM_PR_DEBUG(fmt, arg...) \
+	do { \
+		if (do_debug) \
+			printk(KERN_DEBUG fmt, ##arg); \
+	} while (0)
+
+#define	CTCM_PR_DBGDATA(fmt, arg...) \
+	do { \
+		if (do_debug_data) \
+			printk(KERN_DEBUG fmt, ##arg); \
+	} while (0)
+
+#define	CTCM_D3_DUMP(buf, len) \
+	do { \
+		if (do_debug_data) \
+			ctcmpc_dumpit(buf, len); \
+	} while (0)
+
+#define	CTCM_CCW_DUMP(buf, len) \
+	do { \
+		if (do_debug_ccw) \
+			ctcmpc_dumpit(buf, len); \
+	} while (0)
+
 /*
  * CCW commands, used in this driver.
  */
@@ -161,8 +185,9 @@ struct channel {
 	fsm_instance *fsm;	/* finite state machine of this channel */
 	struct net_device *netdev;	/* corresponding net_device */
 	struct ctcm_profile prof;
-	unsigned char *trans_skb_data;
+	__u8 *trans_skb_data;
 	__u16 logflags;
+	__u8  sense_rc; /* last unit check sense code report control */
 };
 
 struct ctcm_priv {
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index 044addee64a..49ae1cd25ca 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -149,7 +149,7 @@ void ctcmpc_dumpit(char *buf, int len)
 	for (ct = 0; ct < len; ct++, ptr++, rptr++) {
 		if (sw == 0) {
 			#if (UTS_MACHINE == s390x)
-			sprintf(addr, "%16.16lx", (unsigned long)rptr);
+			sprintf(addr, "%16.16lx", (__u64)rptr);
 			#else
 			sprintf(addr, "%8.8X", (__u32)rptr);
 			#endif
@@ -164,7 +164,7 @@ void ctcmpc_dumpit(char *buf, int len)
 			strcat(bhex, "	");
 
 		#if (UTS_MACHINE == s390x)
-		sprintf(tbuf, "%2.2lX", (unsigned long)*ptr);
+		sprintf(tbuf, "%2.2lX", (__u64)*ptr);
 		#else
 		sprintf(tbuf, "%2.2X", (__u32)*ptr);
 		#endif
@@ -179,24 +179,24 @@ void ctcmpc_dumpit(char *buf, int len)
 		basc[sw+1] = '\0';
 		sw++;
 		rm--;
-		if (sw == 16) {
-			if ((strcmp(duphex, bhex)) != 0) {
-				if (dup != 0) {
-					sprintf(tdup, "Duplicate as above "
-						"to %s", addr);
-					printk(KERN_INFO "		  "
-						"     --- %s ---\n", tdup);
-				}
-				printk(KERN_INFO "   %s (+%s) : %s  [%s]\n",
+		if (sw != 16)
+			continue;
+		if ((strcmp(duphex, bhex)) != 0) {
+			if (dup != 0) {
+				sprintf(tdup,
+					"Duplicate as above to %s", addr);
+				ctcm_pr_debug("		       --- %s ---\n",
+						tdup);
+			}
+			ctcm_pr_debug("   %s (+%s) : %s  [%s]\n",
 					addr, boff, bhex, basc);
-				dup = 0;
-				strcpy(duphex, bhex);
-			} else
-				dup++;
+			dup = 0;
+			strcpy(duphex, bhex);
+		} else
+			dup++;
 
-			sw = 0;
-			rm = 16;
-		}
+		sw = 0;
+		rm = 16;
 	}  /* endfor */
 
 	if (sw != 0) {
@@ -210,19 +210,17 @@ void ctcmpc_dumpit(char *buf, int len)
 		}
 		if (dup != 0) {
 			sprintf(tdup, "Duplicate as above to %s", addr);
-			printk(KERN_INFO "		  "
-				"     --- %s ---\n", tdup);
+			ctcm_pr_debug("		       --- %s ---\n", tdup);
 		}
-		printk(KERN_INFO "   %s (+%s) : %s  [%s]\n",
-			addr, boff, bhex, basc);
+		ctcm_pr_debug("   %s (+%s) : %s  [%s]\n",
+					addr, boff, bhex, basc);
 	} else {
 		if (dup >= 1) {
 			sprintf(tdup, "Duplicate as above to %s", addr);
-			printk(KERN_INFO "		  "
-				"     --- %s ---\n", tdup);
+			ctcm_pr_debug("		       --- %s ---\n", tdup);
 		}
 		if (dup != 0) {
-			printk(KERN_INFO "   %s (+%s) : %s  [%s]\n",
+			ctcm_pr_debug("   %s (+%s) : %s  [%s]\n",
 				addr, boff, bhex, basc);
 		}
 	}
@@ -241,7 +239,7 @@ void ctcmpc_dumpit(char *buf, int len)
  */
 void ctcmpc_dump_skb(struct sk_buff *skb, int offset)
 {
-	unsigned char *p = skb->data;
+	__u8 *p = skb->data;
 	struct th_header *header;
 	struct pdu *pheader;
 	int bl = skb->len;
@@ -253,8 +251,8 @@ void ctcmpc_dump_skb(struct sk_buff *skb, int offset)
 	p += offset;
 	header = (struct th_header *)p;
 
-	printk(KERN_INFO "dump:\n");
-	printk(KERN_INFO "skb len=%d \n", skb->len);
+	ctcm_pr_debug("dump:\n");
+	ctcm_pr_debug("skb len=%d \n", skb->len);
 	if (skb->len > 2) {
 		switch (header->th_ch_flag) {
 		case TH_HAS_PDU:
@@ -273,32 +271,64 @@ void ctcmpc_dump_skb(struct sk_buff *skb, int offset)
 		}
 
 		pheader = (struct pdu *)p;
-		printk(KERN_INFO "pdu->offset: %d hex: %04x\n",
-		       pheader->pdu_offset, pheader->pdu_offset);
-		printk(KERN_INFO "pdu->flag  : %02x\n", pheader->pdu_flag);
-		printk(KERN_INFO "pdu->proto : %02x\n", pheader->pdu_proto);
-		printk(KERN_INFO "pdu->seq   : %02x\n", pheader->pdu_seq);
+		ctcm_pr_debug("pdu->offset: %d hex: %04x\n",
+			       pheader->pdu_offset, pheader->pdu_offset);
+		ctcm_pr_debug("pdu->flag  : %02x\n", pheader->pdu_flag);
+		ctcm_pr_debug("pdu->proto : %02x\n", pheader->pdu_proto);
+		ctcm_pr_debug("pdu->seq   : %02x\n", pheader->pdu_seq);
 					goto dumpdata;
 
 dumpth:
-		printk(KERN_INFO "th->seg     : %02x\n", header->th_seg);
-		printk(KERN_INFO "th->ch      : %02x\n", header->th_ch_flag);
-		printk(KERN_INFO "th->blk_flag: %02x\n", header->th_blk_flag);
-		printk(KERN_INFO "th->type    : %s\n",
-		       (header->th_is_xid) ? "DATA" : "XID");
-		printk(KERN_INFO "th->seqnum  : %04x\n", header->th_seq_num);
+		ctcm_pr_debug("th->seg     : %02x\n", header->th_seg);
+		ctcm_pr_debug("th->ch      : %02x\n", header->th_ch_flag);
+		ctcm_pr_debug("th->blk_flag: %02x\n", header->th_blk_flag);
+		ctcm_pr_debug("th->type    : %s\n",
+			       (header->th_is_xid) ? "DATA" : "XID");
+		ctcm_pr_debug("th->seqnum  : %04x\n", header->th_seq_num);
 
 	}
 dumpdata:
 	if (bl > 32)
 		bl = 32;
-	printk(KERN_INFO "data: ");
+	ctcm_pr_debug("data: ");
 	for (i = 0; i < bl; i++)
-		printk(KERN_INFO "%02x%s", *p++, (i % 16) ? " " : "\n<7>");
-	printk(KERN_INFO "\n");
+		ctcm_pr_debug("%02x%s", *p++, (i % 16) ? " " : "\n");
+	ctcm_pr_debug("\n");
 }
 #endif
 
+static struct net_device *ctcmpc_get_dev(int port_num)
+{
+	char device[20];
+	struct net_device *dev;
+	struct ctcm_priv *priv;
+
+	sprintf(device, "%s%i", MPC_DEVICE_NAME, port_num);
+
+	dev = __dev_get_by_name(&init_net, device);
+
+	if (dev == NULL) {
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s: Device not found by name: %s",
+					CTCM_FUNTAIL, device);
+		return NULL;
+	}
+	priv = dev->priv;
+	if (priv == NULL) {
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): dev->priv is NULL",
+					CTCM_FUNTAIL, device);
+		return NULL;
+	}
+	if (priv->mpcg == NULL) {
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): priv->mpcg is NULL",
+					CTCM_FUNTAIL, device);
+		return NULL;
+	}
+	return dev;
+}
+
 /*
  * ctc_mpc_alloc_channel
  *	(exported interface)
@@ -308,34 +338,23 @@ dumpdata:
  */
 int ctc_mpc_alloc_channel(int port_num, void (*callback)(int, int))
 {
-	char device[20];
 	struct net_device *dev;
 	struct mpc_group *grp;
 	struct ctcm_priv *priv;
 
-	ctcm_pr_debug("ctcmpc enter:	%s()\n", __FUNCTION__);
-
-	sprintf(device, "%s%i", MPC_DEVICE_NAME, port_num);
-	dev = __dev_get_by_name(&init_net, device);
-
-	if (dev == NULL) {
-		printk(KERN_INFO "ctc_mpc_alloc_channel %s dev=NULL\n", device);
+	dev = ctcmpc_get_dev(port_num);
+	if (dev == NULL)
 		return 1;
-	}
-
 	priv = dev->priv;
 	grp = priv->mpcg;
-	if (!grp)
-		return 1;
 
 	grp->allochanfunc = callback;
 	grp->port_num = port_num;
 	grp->port_persist = 1;
 
-	ctcm_pr_debug("ctcmpc: %s called for device %s state=%s\n",
-		       __FUNCTION__,
-		       dev->name,
-		       fsm_getstate_str(grp->fsm));
+	CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_INFO,
+			"%s(%s): state=%s",
+			CTCM_FUNTAIL, dev->name, fsm_getstate_str(grp->fsm));
 
 	switch (fsm_getstate(grp->fsm)) {
 	case MPCG_STATE_INOP:
@@ -377,12 +396,8 @@ int ctc_mpc_alloc_channel(int port_num, void (*callback)(int, int))
 			grp->allocchan_callback_retries = 0;
 		}
 		break;
-	default:
-		return 0;
-
 	}
 
-	ctcm_pr_debug("ctcmpc exit:  %s()\n", __FUNCTION__);
 	return 0;
 }
 EXPORT_SYMBOL(ctc_mpc_alloc_channel);
@@ -394,31 +409,22 @@ EXPORT_SYMBOL(ctc_mpc_alloc_channel);
 void ctc_mpc_establish_connectivity(int port_num,
 				void (*callback)(int, int, int))
 {
-	char device[20];
 	struct net_device *dev;
 	struct mpc_group *grp;
 	struct ctcm_priv *priv;
 	struct channel *rch, *wch;
 
-	ctcm_pr_debug("ctcmpc enter:	%s()\n", __FUNCTION__);
-
-	sprintf(device, "%s%i", MPC_DEVICE_NAME, port_num);
-	dev = __dev_get_by_name(&init_net, device);
-
-	if (dev == NULL) {
-		printk(KERN_INFO "ctc_mpc_establish_connectivity "
-				"%s dev=NULL\n", device);
+	dev = ctcmpc_get_dev(port_num);
+	if (dev == NULL)
 		return;
-	}
 	priv = dev->priv;
+	grp = priv->mpcg;
 	rch = priv->channel[READ];
 	wch = priv->channel[WRITE];
 
-	grp = priv->mpcg;
-
-	ctcm_pr_debug("ctcmpc: %s() called for device %s state=%s\n",
-			__FUNCTION__, dev->name,
-			fsm_getstate_str(grp->fsm));
+	CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_INFO,
+			"%s(%s): state=%s",
+			CTCM_FUNTAIL, dev->name, fsm_getstate_str(grp->fsm));
 
 	grp->estconnfunc = callback;
 	grp->port_num = port_num;
@@ -446,8 +452,10 @@ void ctc_mpc_establish_connectivity(int port_num,
 	case MPCG_STATE_RESET:
 		/* MPC Group is not ready to start XID - min num of */
 		/* 1 read and 1 write channel have not been acquired*/
-		printk(KERN_WARNING "ctcmpc: %s() REJECTED ACTIVE XID Req"
-			"uest - Channel Pair is not Active\n", __FUNCTION__);
+
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): REJECTED - inactive channels",
+					CTCM_FUNTAIL, dev->name);
 		if (grp->estconnfunc) {
 			grp->estconnfunc(grp->port_num, -1, 0);
 			grp->estconnfunc = NULL;
@@ -457,11 +465,12 @@ void ctc_mpc_establish_connectivity(int port_num,
 		/* alloc channel was called but no XID exchange    */
 		/* has occurred. initiate xside XID exchange	   */
 		/* make sure yside XID0 processing has not started */
+
 		if ((fsm_getstate(rch->fsm) > CH_XID0_PENDING) ||
 			(fsm_getstate(wch->fsm) > CH_XID0_PENDING)) {
-			printk(KERN_WARNING "mpc: %s() ABORT ACTIVE XID"
-			       " Request- PASSIVE XID in process\n"
-			       , __FUNCTION__);
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): ABORT - PASSIVE XID",
+					CTCM_FUNTAIL, dev->name);
 			break;
 		}
 		grp->send_qllc_disc = 1;
@@ -476,9 +485,9 @@ void ctc_mpc_establish_connectivity(int port_num,
 				(fsm_getstate(rch->fsm) == CH_XID0_PENDING))
 			fsm_event(grp->fsm, MPCG_EVENT_XID0DO, rch);
 		else {
-			printk(KERN_WARNING "mpc: %s() Unable to start"
-			       " ACTIVE XID0 on read channel\n",
-			       __FUNCTION__);
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): RX-%s not ready for ACTIVE XID0",
+					CTCM_FUNTAIL, dev->name, rch->id);
 			if (grp->estconnfunc) {
 				grp->estconnfunc(grp->port_num, -1, 0);
 				grp->estconnfunc = NULL;
@@ -490,9 +499,9 @@ void ctc_mpc_establish_connectivity(int port_num,
 				(fsm_getstate(wch->fsm) == CH_XID0_PENDING))
 			fsm_event(grp->fsm, MPCG_EVENT_XID0DO, wch);
 		else {
-			printk(KERN_WARNING "mpc: %s() Unable to start"
-				" ACTIVE XID0 on write channel\n",
-					__FUNCTION__);
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): WX-%s not ready for ACTIVE XID0",
+					CTCM_FUNTAIL, dev->name, wch->id);
 			if (grp->estconnfunc) {
 				grp->estconnfunc(grp->port_num, -1, 0);
 				grp->estconnfunc = NULL;
@@ -508,7 +517,7 @@ void ctc_mpc_establish_connectivity(int port_num,
 	}
 
 done:
-	ctcm_pr_debug("ctcmpc exit:  %s()\n", __FUNCTION__);
+	CTCM_PR_DEBUG("Exit %s()\n", __func__);
 	return;
 }
 EXPORT_SYMBOL(ctc_mpc_establish_connectivity);
@@ -520,40 +529,22 @@ EXPORT_SYMBOL(ctc_mpc_establish_connectivity);
 void ctc_mpc_dealloc_ch(int port_num)
 {
 	struct net_device *dev;
-	char device[20];
 	struct ctcm_priv *priv;
 	struct mpc_group *grp;
 
-	ctcm_pr_debug("ctcmpc enter:	%s()\n", __FUNCTION__);
-	sprintf(device, "%s%i", MPC_DEVICE_NAME, port_num);
-	dev = __dev_get_by_name(&init_net, device);
-
-	if (dev == NULL) {
-		printk(KERN_INFO "%s() %s dev=NULL\n", __FUNCTION__, device);
-					goto done;
-	}
+	dev = ctcmpc_get_dev(port_num);
+	if (dev == NULL)
+		return;
+	priv = dev->priv;
+	grp = priv->mpcg;
 
-	ctcm_pr_debug("ctcmpc:%s %s() called for device %s refcount=%d\n",
-			dev->name, __FUNCTION__,
-			dev->name, atomic_read(&dev->refcnt));
+	CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_DEBUG,
+			"%s: %s: refcount = %d\n",
+			CTCM_FUNTAIL, dev->name, atomic_read(&dev->refcnt));
 
-	priv = dev->priv;
-	if (priv == NULL) {
-		printk(KERN_INFO "%s() %s priv=NULL\n",
-				__FUNCTION__, device);
-					goto done;
-	}
 	fsm_deltimer(&priv->restart_timer);
-
-	grp = priv->mpcg;
-	if (grp == NULL) {
-		printk(KERN_INFO "%s() %s dev=NULL\n", __FUNCTION__, device);
-					goto done;
-	}
 	grp->channels_terminating = 0;
-
 	fsm_deltimer(&grp->timer);
-
 	grp->allochanfunc = NULL;
 	grp->estconnfunc = NULL;
 	grp->port_persist = 0;
@@ -561,8 +552,6 @@ void ctc_mpc_dealloc_ch(int port_num)
 	fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
 
 	ctcm_close(dev);
-done:
-	ctcm_pr_debug("ctcmpc exit:  %s()\n", __FUNCTION__);
 	return;
 }
 EXPORT_SYMBOL(ctc_mpc_dealloc_ch);
@@ -573,32 +562,22 @@ EXPORT_SYMBOL(ctc_mpc_dealloc_ch);
  */
 void ctc_mpc_flow_control(int port_num, int flowc)
 {
-	char device[20];
 	struct ctcm_priv *priv;
 	struct mpc_group *grp;
 	struct net_device *dev;
 	struct channel *rch;
 	int mpcg_state;
 
-	ctcm_pr_debug("ctcmpc enter:	%s() %i\n", __FUNCTION__, flowc);
-
-	sprintf(device, "%s%i", MPC_DEVICE_NAME, port_num);
-	dev = __dev_get_by_name(&init_net, device);
-
-	if (dev == NULL) {
-		printk(KERN_INFO "ctc_mpc_flow_control %s dev=NULL\n", device);
+	dev = ctcmpc_get_dev(port_num);
+	if (dev == NULL)
 		return;
-	}
+	priv = dev->priv;
+	grp = priv->mpcg;
 
-	ctcm_pr_debug("ctcmpc: %s %s called \n", dev->name, __FUNCTION__);
+	CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
+			"%s: %s: flowc = %d",
+				CTCM_FUNTAIL, dev->name, flowc);
 
-	priv  = dev->priv;
-	if (priv == NULL) {
-		printk(KERN_INFO "ctcmpc:%s() %s priv=NULL\n",
-		       __FUNCTION__, device);
-		return;
-	}
-	grp = priv->mpcg;
 	rch = priv->channel[READ];
 
 	mpcg_state = fsm_getstate(grp->fsm);
@@ -629,7 +608,6 @@ void ctc_mpc_flow_control(int port_num, int flowc)
 		break;
 	}
 
-	ctcm_pr_debug("ctcmpc exit:  %s() %i\n", __FUNCTION__, flowc);
 }
 EXPORT_SYMBOL(ctc_mpc_flow_control);
 
@@ -646,12 +624,8 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
 	struct mpc_group  *grp = priv->mpcg;
 	struct channel	  *ch = priv->channel[WRITE];
 
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc enter: %s(): ch=0x%p id=%s\n",
-			__FUNCTION__, ch, ch->id);
-
-	if (do_debug_data)
-		ctcmpc_dumpit((char *)mpcginfo->sweep, TH_SWEEP_LENGTH);
+	CTCM_PR_DEBUG("%s: ch=0x%p id=%s\n", __func__, ch, ch->id);
+	CTCM_D3_DUMP((char *)mpcginfo->sweep, TH_SWEEP_LENGTH);
 
 	grp->sweep_rsp_pend_num--;
 
@@ -684,14 +658,13 @@ static void ctcmpc_send_sweep_resp(struct channel *rch)
 	struct sk_buff *sweep_skb;
 	struct channel *ch  = priv->channel[WRITE];
 
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n",
-			__FUNCTION__, rch, rch->id);
+	CTCM_PR_DEBUG("%s: ch=0x%p id=%s\n", __func__, rch, rch->id);
 
-	sweep_skb = __dev_alloc_skb(MPC_BUFSIZE_DEFAULT,
-				    GFP_ATOMIC|GFP_DMA);
+	sweep_skb = __dev_alloc_skb(MPC_BUFSIZE_DEFAULT, GFP_ATOMIC | GFP_DMA);
 	if (sweep_skb == NULL) {
-		printk(KERN_INFO "Couldn't alloc sweep_skb\n");
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): sweep_skb allocation ERROR\n",
+			CTCM_FUNTAIL, rch->id);
 		rc = -ENOMEM;
 				goto done;
 	}
@@ -746,7 +719,7 @@ static void mpc_rcvd_sweep_req(struct mpcg_info *mpcginfo)
 
 	if (do_debug)
 		CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
-			" %s(): ch=0x%p id=%s\n", __FUNCTION__, ch, ch->id);
+			" %s(): ch=0x%p id=%s\n", __func__, ch, ch->id);
 
 	if (grp->in_sweep == 0) {
 		grp->in_sweep = 1;
@@ -755,8 +728,7 @@ static void mpc_rcvd_sweep_req(struct mpcg_info *mpcginfo)
 		grp->sweep_rsp_pend_num = grp->active_channels[READ];
 	}
 
-	if (do_debug_data)
-		ctcmpc_dumpit((char *)mpcginfo->sweep, TH_SWEEP_LENGTH);
+	CTCM_D3_DUMP((char *)mpcginfo->sweep, TH_SWEEP_LENGTH);
 
 	grp->sweep_req_pend_num--;
 	ctcmpc_send_sweep_resp(ch);
@@ -875,25 +847,13 @@ static int mpcg_fsm_len = ARRAY_SIZE(mpcg_fsm);
 static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = NULL;
-	struct mpc_group *grp = NULL;
-
-	if (dev == NULL) {
-		printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__);
-		return;
-	}
-
-	ctcm_pr_debug("ctcmpc enter: %s  %s()\n", dev->name, __FUNCTION__);
-
-	priv = dev->priv;
-	if (priv == NULL) {
-		printk(KERN_INFO "%s() priv=NULL\n", __FUNCTION__);
-		return;
-	}
+	struct ctcm_priv *priv = dev->priv;
+	struct mpc_group *grp = priv->mpcg;
 
-	grp = priv->mpcg;
 	if (grp == NULL) {
-		printk(KERN_INFO "%s() grp=NULL\n", __FUNCTION__);
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): No MPC group",
+				CTCM_FUNTAIL, dev->name);
 		return;
 	}
 
@@ -907,7 +867,12 @@ static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
 			grp->estconnfunc = NULL;
 		} else if (grp->allochanfunc)
 			grp->send_qllc_disc = 1;
-					goto done;
+
+		fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): fails",
+					CTCM_FUNTAIL, dev->name);
+		return;
 	}
 
 	grp->port_persist = 1;
@@ -916,14 +881,7 @@ static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
 
 	tasklet_hi_schedule(&grp->mpc_tasklet2);
 
-	ctcm_pr_debug("ctcmpc exit: %s  %s()\n", dev->name, __FUNCTION__);
 	return;
-
-done:
-	fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
-
-
-	ctcm_pr_info("ctcmpc: %s()failure occurred\n", __FUNCTION__);
 }
 
 /*
@@ -933,42 +891,28 @@ done:
 void mpc_group_ready(unsigned long adev)
 {
 	struct net_device *dev = (struct net_device *)adev;
-	struct ctcm_priv *priv = NULL;
-	struct mpc_group  *grp = NULL;
+	struct ctcm_priv *priv = dev->priv;
+	struct mpc_group *grp = priv->mpcg;
 	struct channel *ch = NULL;
 
-
-	ctcm_pr_debug("ctcmpc enter:	%s()\n", __FUNCTION__);
-
-	if (dev == NULL) {
-		printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__);
-		return;
-	}
-
-	priv = dev->priv;
-	if (priv == NULL) {
-		printk(KERN_INFO "%s() priv=NULL\n", __FUNCTION__);
-		return;
-	}
-
-	grp = priv->mpcg;
 	if (grp == NULL) {
-		printk(KERN_INFO "ctcmpc:%s() grp=NULL\n", __FUNCTION__);
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): No MPC group",
+				CTCM_FUNTAIL, dev->name);
 		return;
 	}
 
-	printk(KERN_NOTICE "ctcmpc: %s GROUP TRANSITIONED TO READY"
-	       "  maxbuf:%d\n",
-	       dev->name, grp->group_max_buflen);
+	CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_NOTICE,
+		"%s: %s: GROUP TRANSITIONED TO READY, maxbuf = %d\n",
+			CTCM_FUNTAIL, dev->name, grp->group_max_buflen);
 
 	fsm_newstate(grp->fsm, MPCG_STATE_READY);
 
 	/* Put up a read on the channel */
 	ch = priv->channel[READ];
 	ch->pdu_seq = 0;
-	if (do_debug_data)
-		ctcm_pr_debug("ctcmpc: %s() ToDCM_pdu_seq= %08x\n" ,
-			__FUNCTION__, ch->pdu_seq);
+	CTCM_PR_DBGDATA("ctcmpc: %s() ToDCM_pdu_seq= %08x\n" ,
+			__func__, ch->pdu_seq);
 
 	ctcmpc_chx_rxidle(ch->fsm, CTC_EVENT_START, ch);
 	/* Put the write channel in idle state */
@@ -980,22 +924,18 @@ void mpc_group_ready(unsigned long adev)
 		spin_unlock(&ch->collect_lock);
 	}
 	ctcm_chx_txidle(ch->fsm, CTC_EVENT_START, ch);
-
 	ctcm_clear_busy(dev);
 
 	if (grp->estconnfunc) {
 		grp->estconnfunc(grp->port_num, 0,
 				    grp->group_max_buflen);
 		grp->estconnfunc = NULL;
-	} else
-		if (grp->allochanfunc)
-		grp->allochanfunc(grp->port_num,
-				     grp->group_max_buflen);
+	} else 	if (grp->allochanfunc)
+		grp->allochanfunc(grp->port_num, grp->group_max_buflen);
 
 	grp->send_qllc_disc = 1;
 	grp->changed_side = 0;
 
-	ctcm_pr_debug("ctcmpc exit:  %s()\n", __FUNCTION__);
 	return;
 
 }
@@ -1004,51 +944,26 @@ void mpc_group_ready(unsigned long adev)
  * Increment the MPC Group Active Channel Counts
  * helper of dev_action (called from channel fsm)
  */
-int mpc_channel_action(struct channel *ch, int direction, int action)
+void mpc_channel_action(struct channel *ch, int direction, int action)
 {
-	struct net_device  *dev     = ch->netdev;
-	struct ctcm_priv    *priv;
-	struct mpc_group   *grp  = NULL;
-	int	    rc = 0;
-
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc enter: %s(): ch=0x%p id=%s\n",
-			__FUNCTION__, ch, ch->id);
-
-	if (dev == NULL) {
-		printk(KERN_INFO "ctcmpc_channel_action %i dev=NULL\n",
-		       action);
-		rc = 1;
-					goto done;
-	}
-
-	priv = dev->priv;
-	if (priv == NULL) {
-		printk(KERN_INFO
-		       "ctcmpc_channel_action%i priv=NULL, dev=%s\n",
-		       action, dev->name);
-		rc = 2;
-					goto done;
-	}
-
-	grp = priv->mpcg;
+	struct net_device  *dev  = ch->netdev;
+	struct ctcm_priv   *priv = dev->priv;
+	struct mpc_group   *grp  = priv->mpcg;
 
 	if (grp == NULL) {
-		printk(KERN_INFO "ctcmpc: %s()%i mpcgroup=NULL, dev=%s\n",
-		       __FUNCTION__, action, dev->name);
-		rc = 3;
-					goto done;
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): No MPC group",
+				CTCM_FUNTAIL, dev->name);
+		return;
 	}
 
-	ctcm_pr_info(
-		      "ctcmpc: %s() %i(): Grp:%s total_channel_paths=%i "
-		      "active_channels read=%i, write=%i\n",
-		      __FUNCTION__,
-		      action,
-		      fsm_getstate_str(grp->fsm),
-		      grp->num_channel_paths,
-		      grp->active_channels[READ],
-		      grp->active_channels[WRITE]);
+	CTCM_PR_DEBUG("enter %s: ch=0x%p id=%s\n", __func__, ch, ch->id);
+
+	CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE,
+		"%s: %i / Grp:%s total_channels=%i, active_channels: "
+		"read=%i, write=%i\n", __func__, action,
+		fsm_getstate_str(grp->fsm), grp->num_channel_paths,
+		grp->active_channels[READ], grp->active_channels[WRITE]);
 
 	if ((action == MPC_CHANNEL_ADD) && (ch->in_mpcgroup == 0)) {
 		grp->num_channel_paths++;
@@ -1062,10 +977,11 @@ int mpc_channel_action(struct channel *ch, int direction, int action)
 		ch->xid_skb = __dev_alloc_skb(MPC_BUFSIZE_DEFAULT,
 					GFP_ATOMIC | GFP_DMA);
 		if (ch->xid_skb == NULL) {
-			printk(KERN_INFO "ctcmpc: %s()"
-			       "Couldn't alloc ch xid_skb\n", __FUNCTION__);
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): Couldn't alloc ch xid_skb\n",
+				CTCM_FUNTAIL, dev->name);
 			fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
-			return 1;
+			return;
 		}
 		ch->xid_skb_data = ch->xid_skb->data;
 		ch->xid_th = (struct th_header *)ch->xid_skb->data;
@@ -1097,8 +1013,9 @@ int mpc_channel_action(struct channel *ch, int direction, int action)
 		    (grp->active_channels[WRITE] > 0) &&
 			(fsm_getstate(grp->fsm) < MPCG_STATE_XID2INITW)) {
 			fsm_newstate(grp->fsm, MPCG_STATE_XID2INITW);
-			printk(KERN_NOTICE "ctcmpc: %s MPC GROUP "
-					"CHANNELS ACTIVE\n", dev->name);
+			CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_NOTICE,
+				"%s: %s: MPC GROUP CHANNELS ACTIVE\n",
+						__func__, dev->name);
 		}
 	} else if ((action == MPC_CHANNEL_REMOVE) &&
 			(ch->in_mpcgroup == 1)) {
@@ -1119,25 +1036,14 @@ int mpc_channel_action(struct channel *ch, int direction, int action)
 					(grp->active_channels[READ] > 0)))
 			fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
 	}
-
 done:
+	CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
+		"exit %s: %i / Grp:%s total_channels=%i, active_channels: "
+		"read=%i, write=%i\n", __func__, action,
+		fsm_getstate_str(grp->fsm), grp->num_channel_paths,
+		grp->active_channels[READ], grp->active_channels[WRITE]);
 
-	if (do_debug) {
-		ctcm_pr_debug(
-		       "ctcmpc: %s() %i Grp:%s ttl_chan_paths=%i "
-		       "active_chans read=%i, write=%i\n",
-		       __FUNCTION__,
-		       action,
-		       fsm_getstate_str(grp->fsm),
-		       grp->num_channel_paths,
-		       grp->active_channels[READ],
-		       grp->active_channels[WRITE]);
-
-		ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n",
-				__FUNCTION__, ch, ch->id);
-	}
-	return rc;
-
+	CTCM_PR_DEBUG("exit %s: ch=0x%p id=%s\n", __func__, ch, ch->id);
 }
 
 /**
@@ -1163,9 +1069,8 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 	int skblen;
 	int sendrc = 0;
 
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc enter: %s() %s cp:%i ch:%s\n",
-		       __FUNCTION__, dev->name, smp_processor_id(), ch->id);
+	CTCM_PR_DEBUG("ctcmpc enter: %s() %s cp:%i ch:%s\n",
+			__func__, dev->name, smp_processor_id(), ch->id);
 
 	header = (struct th_header *)pskb->data;
 	if ((header->th_seg == 0) &&
@@ -1174,21 +1079,16 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 		(header->th_seq_num == 0))
 		/* nothing for us */	goto done;
 
-	if (do_debug_data) {
-		ctcm_pr_debug("ctcmpc: %s() th_header\n", __FUNCTION__);
-		ctcmpc_dumpit((char *)header, TH_HEADER_LENGTH);
-		ctcm_pr_debug("ctcmpc: %s() pskb len: %04x \n",
-		       __FUNCTION__, pskb->len);
-	}
+	CTCM_PR_DBGDATA("%s: th_header\n", __func__);
+	CTCM_D3_DUMP((char *)header, TH_HEADER_LENGTH);
+	CTCM_PR_DBGDATA("%s: pskb len: %04x \n", __func__, pskb->len);
 
 	pskb->dev = dev;
 	pskb->ip_summed = CHECKSUM_UNNECESSARY;
 	skb_pull(pskb, TH_HEADER_LENGTH);
 
 	if (likely(header->th_ch_flag == TH_HAS_PDU)) {
-		if (do_debug_data)
-			ctcm_pr_debug("ctcmpc: %s() came into th_has_pdu\n",
-			       __FUNCTION__);
+		CTCM_PR_DBGDATA("%s: came into th_has_pdu\n", __func__);
 		if ((fsm_getstate(grp->fsm) == MPCG_STATE_FLOWC) ||
 		   ((fsm_getstate(grp->fsm) == MPCG_STATE_READY) &&
 		    (header->th_seq_num != ch->th_seq_num + 1) &&
@@ -1202,33 +1102,29 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 			grp->out_of_sequence += 1;
 			__skb_push(pskb, TH_HEADER_LENGTH);
 			skb_queue_tail(&ch->io_queue, pskb);
-			if (do_debug_data)
-				ctcm_pr_debug("ctcmpc: %s() th_seq_num "
-				       "expect:%08x got:%08x\n", __FUNCTION__,
-				       ch->th_seq_num + 1, header->th_seq_num);
+			CTCM_PR_DBGDATA("%s: th_seq_num expect:%08x "
+					"got:%08x\n", __func__,
+				ch->th_seq_num + 1, header->th_seq_num);
 
 			return;
 		}
 		grp->out_of_sequence = 0;
 		ch->th_seq_num = header->th_seq_num;
 
-		if (do_debug_data)
-			ctcm_pr_debug("ctcmpc: %s() FromVTAM_th_seq=%08x\n",
-			       __FUNCTION__, ch->th_seq_num);
+		CTCM_PR_DBGDATA("ctcmpc: %s() FromVTAM_th_seq=%08x\n",
+					__func__, ch->th_seq_num);
 
 		if (unlikely(fsm_getstate(grp->fsm) != MPCG_STATE_READY))
 					goto done;
 		pdu_last_seen = 0;
 		while ((pskb->len > 0) && !pdu_last_seen) {
 			curr_pdu = (struct pdu *)pskb->data;
-			if (do_debug_data) {
-				ctcm_pr_debug("ctcm: %s() pdu_header\n",
-				       __FUNCTION__);
-				ctcmpc_dumpit((char *)pskb->data,
-						PDU_HEADER_LENGTH);
-				ctcm_pr_debug("ctcm: %s() pskb len: %04x \n",
-				       __FUNCTION__, pskb->len);
-			}
+
+			CTCM_PR_DBGDATA("%s: pdu_header\n", __func__);
+			CTCM_D3_DUMP((char *)pskb->data, PDU_HEADER_LENGTH);
+			CTCM_PR_DBGDATA("%s: pskb len: %04x \n",
+						__func__, pskb->len);
+
 			skb_pull(pskb, PDU_HEADER_LENGTH);
 
 			if (curr_pdu->pdu_flag & PDU_LAST)
@@ -1239,46 +1135,39 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 				pskb->protocol = htons(ETH_P_SNA_DIX);
 
 			if ((pskb->len <= 0) || (pskb->len > ch->max_bufsize)) {
-				printk(KERN_INFO
-				       "%s Illegal packet size %d "
-				       "received "
-				       "dropping\n", dev->name,
-				       pskb->len);
+				CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+					"%s(%s): Dropping packet with "
+					"illegal siize %d",
+					CTCM_FUNTAIL, dev->name, pskb->len);
+
 				priv->stats.rx_dropped++;
 				priv->stats.rx_length_errors++;
 					goto done;
 			}
 			skb_reset_mac_header(pskb);
 			new_len = curr_pdu->pdu_offset;
-			if (do_debug_data)
-				ctcm_pr_debug("ctcmpc: %s() new_len: %04x \n",
-				       __FUNCTION__, new_len);
+			CTCM_PR_DBGDATA("%s: new_len: %04x \n",
+						__func__, new_len);
 			if ((new_len == 0) || (new_len > pskb->len)) {
 				/* should never happen		    */
 				/* pskb len must be hosed...bail out */
-				printk(KERN_INFO
-				       "ctcmpc: %s(): invalid pdu"
-				       " offset of %04x - data may be"
-				       "lost\n", __FUNCTION__, new_len);
-						goto done;
+				CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+					"%s(%s): non valid pdu_offset: %04x",
+					/* "data may be lost", */
+					CTCM_FUNTAIL, dev->name, new_len);
+				goto done;
 			}
 			skb = __dev_alloc_skb(new_len+4, GFP_ATOMIC);
 
 			if (!skb) {
-				printk(KERN_INFO
-				       "ctcm: %s Out of memory in "
-				       "%s()- request-len:%04x \n",
-				       dev->name,
-				       __FUNCTION__,
-				       new_len+4);
+				CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+					"%s(%s): MEMORY allocation error",
+						CTCM_FUNTAIL, dev->name);
 				priv->stats.rx_dropped++;
-				fsm_event(grp->fsm,
-					  MPCG_EVENT_INOP, dev);
+				fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
 						goto done;
 			}
-
-			memcpy(skb_put(skb, new_len),
-					pskb->data, new_len);
+			memcpy(skb_put(skb, new_len), pskb->data, new_len);
 
 			skb_reset_mac_header(skb);
 			skb->dev = pskb->dev;
@@ -1287,17 +1176,14 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 			*((__u32 *) skb_push(skb, 4)) = ch->pdu_seq;
 			ch->pdu_seq++;
 
-			if (do_debug_data)
-				ctcm_pr_debug("%s: ToDCM_pdu_seq= %08x\n",
-				       __FUNCTION__, ch->pdu_seq);
-
-			ctcm_pr_debug("ctcm: %s() skb:%0lx "
-				"skb len: %d \n", __FUNCTION__,
-			       (unsigned long)skb, skb->len);
 			if (do_debug_data) {
-				ctcm_pr_debug("ctcmpc: %s() up to 32 bytes"
-					       " of pdu_data sent\n",
-					       __FUNCTION__);
+				ctcm_pr_debug("%s: ToDCM_pdu_seq= %08x\n",
+						__func__, ch->pdu_seq);
+				ctcm_pr_debug("%s: skb:%0lx "
+					"skb len: %d \n", __func__,
+					(unsigned long)skb, skb->len);
+				ctcm_pr_debug("%s: up to 32 bytes "
+					"of pdu_data sent\n", __func__);
 				ctcmpc_dump32((char *)skb->data, skb->len);
 			}
 
@@ -1316,8 +1202,8 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 		mpcginfo->ch = ch;
 		mpcginfo->th = header;
 		mpcginfo->skb = pskb;
-		ctcm_pr_debug("ctcmpc: %s() Not PDU - may be control pkt\n",
-			       __FUNCTION__);
+		CTCM_PR_DEBUG("%s: Not PDU - may be control pkt\n",
+					__func__);
 		/*  it's a sweep?   */
 		sweep = (struct th_sweep *)pskb->data;
 		mpcginfo->sweep = sweep;
@@ -1333,8 +1219,9 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 		} else if (header->th_blk_flag == TH_DISCONTACT)
 			fsm_event(grp->fsm, MPCG_EVENT_DISCONC, mpcginfo);
 		else if (header->th_seq_num != 0) {
-			printk(KERN_INFO "%s unexpected packet"
-					" expected control pkt\n", dev->name);
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): control pkt expected\n",
+						CTCM_FUNTAIL, dev->name);
 			priv->stats.rx_dropped++;
 			/* mpcginfo only used for non-data transfers */
 			kfree(mpcginfo);
@@ -1347,13 +1234,12 @@ done:
 	dev_kfree_skb_any(pskb);
 	if (sendrc == NET_RX_DROP) {
 		printk(KERN_WARNING "%s %s() NETWORK BACKLOG EXCEEDED"
-		       " - PACKET DROPPED\n", dev->name, __FUNCTION__);
+		       " - PACKET DROPPED\n", dev->name, __func__);
 		fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
 	}
 
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit : %s %s(): ch=0x%p id=%s\n",
-				dev->name, __FUNCTION__, ch, ch->id);
+	CTCM_PR_DEBUG("exit %s: %s: ch=0x%p id=%s\n",
+			__func__, dev->name, ch, ch->id);
 }
 
 /**
@@ -1366,15 +1252,14 @@ done:
  */
 void ctcmpc_bh(unsigned long thischan)
 {
-	struct channel	  *ch	    = (struct channel *)thischan;
+	struct channel	  *ch	= (struct channel *)thischan;
 	struct sk_buff	  *skb;
-	struct net_device *dev	    = ch->netdev;
-	struct ctcm_priv  *priv  = dev->priv;
-	struct mpc_group  *grp   = priv->mpcg;
+	struct net_device *dev	= ch->netdev;
+	struct ctcm_priv  *priv	= dev->priv;
+	struct mpc_group  *grp	= priv->mpcg;
 
-	if (do_debug)
-		ctcm_pr_debug("%s cp:%i enter:  %s() %s\n",
-		       dev->name, smp_processor_id(), __FUNCTION__, ch->id);
+	CTCM_PR_DEBUG("%s cp:%i enter:  %s() %s\n",
+	       dev->name, smp_processor_id(), __func__, ch->id);
 	/* caller has requested driver to throttle back */
 	while ((fsm_getstate(grp->fsm) != MPCG_STATE_FLOWC) &&
 			(skb = skb_dequeue(&ch->io_queue))) {
@@ -1390,9 +1275,8 @@ void ctcmpc_bh(unsigned long thischan)
 		if (skb == skb_peek(&ch->io_queue))
 			break;
 	}
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit : %s %s(): ch=0x%p id=%s\n",
-			dev->name, __FUNCTION__, ch,  ch->id);
+	CTCM_PR_DEBUG("exit %s: %s: ch=0x%p id=%s\n",
+			__func__, dev->name, ch, ch->id);
 	return;
 }
 
@@ -1403,16 +1287,16 @@ struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv)
 {
 	struct mpc_group *grp;
 
-	CTCM_DBF_TEXT(MPC_SETUP, 3, __FUNCTION__);
+	CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_INFO,
+			"Enter %s(%p)", CTCM_FUNTAIL, priv);
 
 	grp = kzalloc(sizeof(struct mpc_group), GFP_KERNEL);
 	if (grp == NULL)
 		return NULL;
 
-	grp->fsm =
-		init_fsm("mpcg", mpcg_state_names, mpcg_event_names,
-				 MPCG_NR_STATES, MPCG_NR_EVENTS, mpcg_fsm,
-				 mpcg_fsm_len, GFP_KERNEL);
+	grp->fsm = init_fsm("mpcg", mpcg_state_names, mpcg_event_names,
+			MPCG_NR_STATES, MPCG_NR_EVENTS, mpcg_fsm,
+			mpcg_fsm_len, GFP_KERNEL);
 	if (grp->fsm == NULL) {
 		kfree(grp);
 		return NULL;
@@ -1424,7 +1308,6 @@ struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv)
 	grp->xid_skb =
 		 __dev_alloc_skb(MPC_BUFSIZE_DEFAULT, GFP_ATOMIC | GFP_DMA);
 	if (grp->xid_skb == NULL) {
-		printk(KERN_INFO "Couldn't alloc MPCgroup xid_skb\n");
 		kfree_fsm(grp->fsm);
 		kfree(grp);
 		return NULL;
@@ -1435,7 +1318,7 @@ struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv)
 	memcpy(skb_put(grp->xid_skb, TH_HEADER_LENGTH),
 			&thnorm, TH_HEADER_LENGTH);
 
-	grp->xid = (struct xid2 *) skb_tail_pointer(grp->xid_skb);
+	grp->xid = (struct xid2 *)skb_tail_pointer(grp->xid_skb);
 	memcpy(skb_put(grp->xid_skb, XID2_LENGTH), &init_xid, XID2_LENGTH);
 	grp->xid->xid2_adj_id = jiffies | 0xfff00000;
 	grp->xid->xid2_sender_id = jiffies;
@@ -1446,7 +1329,6 @@ struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv)
 	grp->rcvd_xid_skb =
 		__dev_alloc_skb(MPC_BUFSIZE_DEFAULT, GFP_ATOMIC|GFP_DMA);
 	if (grp->rcvd_xid_skb == NULL) {
-		printk(KERN_INFO "Couldn't alloc MPCgroup rcvd_xid_skb\n");
 		kfree_fsm(grp->fsm);
 		dev_kfree_skb(grp->xid_skb);
 		kfree(grp);
@@ -1492,32 +1374,27 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg)
 	int rc = 0;
 	struct channel *wch, *rch;
 
-	if (dev == NULL) {
-		printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__);
-		return;
-	}
-
-	ctcm_pr_debug("ctcmpc enter: %s  %s()\n", dev->name, __FUNCTION__);
+	BUG_ON(dev == NULL);
+	CTCM_PR_DEBUG("Enter %s: %s\n",	__func__, dev->name);
 
 	priv  = dev->priv;
 	grp =  priv->mpcg;
 	grp->flow_off_called = 0;
-
 	fsm_deltimer(&grp->timer);
-
 	if (grp->channels_terminating)
-					goto done;
+			return;
 
 	grp->channels_terminating = 1;
-
 	grp->saved_state = fsm_getstate(grp->fsm);
 	fsm_newstate(grp->fsm, MPCG_STATE_INOP);
 	if (grp->saved_state > MPCG_STATE_XID7INITF)
-		printk(KERN_NOTICE "%s:MPC GROUP INOPERATIVE\n", dev->name);
+		CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE,
+			"%s(%s): MPC GROUP INOPERATIVE",
+				CTCM_FUNTAIL, dev->name);
 	if ((grp->saved_state != MPCG_STATE_RESET) ||
 		/* dealloc_channel has been called */
-		((grp->saved_state == MPCG_STATE_RESET) &&
-				(grp->port_persist == 0)))
+			((grp->saved_state == MPCG_STATE_RESET) &&
+						(grp->port_persist == 0)))
 		fsm_deltimer(&priv->restart_timer);
 
 	wch = priv->channel[WRITE];
@@ -1567,29 +1444,24 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg)
 	/* This can result in INOP of VTAM PU due to halting of  */
 	/* outstanding IO which causes a sense to be returned	 */
 	/* Only about 3 senses are allowed and then IOS/VTAM will*/
-	/* ebcome unreachable without manual intervention	 */
-	if ((grp->port_persist == 1)	|| (grp->alloc_called)) {
+	/* become unreachable without manual intervention	 */
+	if ((grp->port_persist == 1) || (grp->alloc_called)) {
 		grp->alloc_called = 0;
 		fsm_deltimer(&priv->restart_timer);
-		fsm_addtimer(&priv->restart_timer,
-			     500,
-			     DEV_EVENT_RESTART,
-			     dev);
+		fsm_addtimer(&priv->restart_timer, 500, DEV_EVENT_RESTART, dev);
 		fsm_newstate(grp->fsm, MPCG_STATE_RESET);
 		if (grp->saved_state > MPCG_STATE_XID7INITF)
-			printk(KERN_NOTICE "%s:MPC GROUP RECOVERY SCHEDULED\n",
-			       dev->name);
+			CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_ALWAYS,
+				"%s(%s): MPC GROUP RECOVERY SCHEDULED",
+					CTCM_FUNTAIL, dev->name);
 	} else {
 		fsm_deltimer(&priv->restart_timer);
 		fsm_addtimer(&priv->restart_timer, 500, DEV_EVENT_STOP, dev);
 		fsm_newstate(grp->fsm, MPCG_STATE_RESET);
-		printk(KERN_NOTICE "%s:MPC GROUP RECOVERY NOT ATTEMPTED\n",
-		       dev->name);
+		CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_ALWAYS,
+			"%s(%s): NO MPC GROUP RECOVERY ATTEMPTED",
+						CTCM_FUNTAIL, dev->name);
 	}
-
-done:
-	ctcm_pr_debug("ctcmpc exit:%s  %s()\n", dev->name, __FUNCTION__);
-	return;
 }
 
 /**
@@ -1609,12 +1481,7 @@ static void mpc_action_timeout(fsm_instance *fi, int event, void *arg)
 	struct channel *wch;
 	struct channel *rch;
 
-	CTCM_DBF_TEXT(MPC_TRACE, 6, __FUNCTION__);
-
-	if (dev == NULL) {
-		CTCM_DBF_TEXT_(MPC_ERROR, 4, "%s: dev=NULL\n", __FUNCTION__);
-		return;
-	}
+	BUG_ON(dev == NULL);
 
 	priv = dev->priv;
 	grp = priv->mpcg;
@@ -1633,8 +1500,9 @@ static void mpc_action_timeout(fsm_instance *fi, int event, void *arg)
 		fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
 	}
 
-	CTCM_DBF_TEXT_(MPC_TRACE, 6, "%s: dev=%s exit",
-					__FUNCTION__, dev->name);
+	CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
+			"%s: dev=%s exit",
+			CTCM_FUNTAIL, dev->name);
 	return;
 }
 
@@ -1646,25 +1514,25 @@ void mpc_action_discontact(fsm_instance *fi, int event, void *arg)
 {
 	struct mpcg_info   *mpcginfo   = arg;
 	struct channel	   *ch	       = mpcginfo->ch;
-	struct net_device  *dev        = ch->netdev;
-	struct ctcm_priv   *priv    = dev->priv;
-	struct mpc_group   *grp     = priv->mpcg;
+	struct net_device  *dev;
+	struct ctcm_priv   *priv;
+	struct mpc_group   *grp;
 
-	if (ch == NULL)	{
-		printk(KERN_INFO "%s() ch=NULL\n", __FUNCTION__);
-		return;
-	}
-	if (ch->netdev == NULL)	{
-		printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__);
-		return;
+	if (ch) {
+		dev = ch->netdev;
+		if (dev) {
+			priv = dev->priv;
+			if (priv) {
+				CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE,
+					"%s: %s: %s\n",
+					CTCM_FUNTAIL, dev->name, ch->id);
+				grp = priv->mpcg;
+				grp->send_qllc_disc = 1;
+				fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
+			}
+		}
 	}
 
-	ctcm_pr_debug("ctcmpc enter: %s  %s()\n", dev->name, __FUNCTION__);
-
-	grp->send_qllc_disc = 1;
-	fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
-
-	ctcm_pr_debug("ctcmpc exit: %s  %s()\n", dev->name, __FUNCTION__);
 	return;
 }
 
@@ -1675,26 +1543,9 @@ void mpc_action_discontact(fsm_instance *fi, int event, void *arg)
  */
 void mpc_action_send_discontact(unsigned long thischan)
 {
-	struct channel	   *ch;
-	struct net_device  *dev;
-	struct ctcm_priv    *priv;
-	struct mpc_group   *grp;
-	int rc = 0;
-	unsigned long	  saveflags;
-
-	ch = (struct channel *)thischan;
-	dev = ch->netdev;
-	priv = dev->priv;
-	grp = priv->mpcg;
-
-	ctcm_pr_info("ctcmpc: %s cp:%i enter: %s() GrpState:%s ChState:%s\n",
-		       dev->name,
-		       smp_processor_id(),
-		       __FUNCTION__,
-		       fsm_getstate_str(grp->fsm),
-		       fsm_getstate_str(ch->fsm));
-	saveflags = 0;	/* avoids compiler warning with
-			   spin_unlock_irqrestore */
+	int rc;
+	struct channel	*ch = (struct channel *)thischan;
+	unsigned long	saveflags = 0;
 
 	spin_lock_irqsave(get_ccwdev_lock(ch->cdev), saveflags);
 	rc = ccw_device_start(ch->cdev, &ch->ccw[15],
@@ -1702,16 +1553,9 @@ void mpc_action_send_discontact(unsigned long thischan)
 	spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags);
 
 	if (rc != 0) {
-		ctcm_pr_info("ctcmpc: %s() ch:%s IO failed \n",
-			       __FUNCTION__,
-			       ch->id);
-		ctcm_ccw_check_rc(ch, rc, "send discontact");
-		/* Not checking return code value here */
-		/* Making best effort to notify partner*/
-		/* that MPC Group is going down        */
+		ctcm_ccw_check_rc(ch, rc, (char *)__func__);
 	}
 
-	ctcm_pr_debug("ctcmpc exit: %s  %s()\n", dev->name, __FUNCTION__);
 	return;
 }
 
@@ -1723,49 +1567,50 @@ void mpc_action_send_discontact(unsigned long thischan)
 */
 static int mpc_validate_xid(struct mpcg_info *mpcginfo)
 {
-	struct channel	   *ch	    = mpcginfo->ch;
-	struct net_device  *dev     = ch->netdev;
+	struct channel	   *ch	 = mpcginfo->ch;
+	struct net_device  *dev  = ch->netdev;
 	struct ctcm_priv   *priv = dev->priv;
 	struct mpc_group   *grp  = priv->mpcg;
-	struct xid2	   *xid     = mpcginfo->xid;
-	int	failed	= 0;
-	int	rc	= 0;
-	__u64	our_id, their_id = 0;
-	int	len;
-
-	len = TH_HEADER_LENGTH + PDU_HEADER_LENGTH;
+	struct xid2	   *xid  = mpcginfo->xid;
+	int	rc	 = 0;
+	__u64	our_id   = 0;
+	__u64   their_id = 0;
+	int	len = TH_HEADER_LENGTH + PDU_HEADER_LENGTH;
 
-	ctcm_pr_debug("ctcmpc enter:	%s()\n", __FUNCTION__);
+	CTCM_PR_DEBUG("Enter %s: xid=%p\n", __func__, xid);
 
-	if (mpcginfo->xid == NULL) {
-		printk(KERN_INFO "%s() xid=NULL\n", __FUNCTION__);
+	if (xid == NULL) {
 		rc = 1;
-					goto done;
+		/* XID REJECTED: xid == NULL */
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): xid = NULL",
+				CTCM_FUNTAIL, ch->id);
+			goto done;
 	}
 
-	ctcm_pr_debug("ctcmpc :  %s  xid received()\n", __FUNCTION__);
-	ctcmpc_dumpit((char *)mpcginfo->xid, XID2_LENGTH);
+	CTCM_D3_DUMP((char *)xid, XID2_LENGTH);
 
 	/*the received direction should be the opposite of ours  */
 	if (((CHANNEL_DIRECTION(ch->flags) == READ) ? XID2_WRITE_SIDE :
 				XID2_READ_SIDE) != xid->xid2_dlc_type) {
-		failed = 1;
-		printk(KERN_INFO "ctcmpc:%s() XID REJECTED - READ-WRITE CH "
-			"Pairing Invalid \n", __FUNCTION__);
+		rc = 2;
+		/* XID REJECTED: r/w channel pairing mismatch */
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): r/w channel pairing mismatch",
+				CTCM_FUNTAIL, ch->id);
+			goto done;
 	}
 
 	if (xid->xid2_dlc_type == XID2_READ_SIDE) {
-		ctcm_pr_debug("ctcmpc: %s(): grpmaxbuf:%d xid2buflen:%d\n",
-				__FUNCTION__, grp->group_max_buflen,
-				xid->xid2_buf_len);
+		CTCM_PR_DEBUG("%s: grpmaxbuf:%d xid2buflen:%d\n", __func__,
+				grp->group_max_buflen, xid->xid2_buf_len);
 
-		if (grp->group_max_buflen == 0 ||
-			grp->group_max_buflen > xid->xid2_buf_len - len)
+		if (grp->group_max_buflen == 0 || grp->group_max_buflen >
+						xid->xid2_buf_len - len)
 			grp->group_max_buflen = xid->xid2_buf_len - len;
 	}
 
-
-	if (grp->saved_xid2 == NULL)	{
+	if (grp->saved_xid2 == NULL) {
 		grp->saved_xid2 =
 			(struct xid2 *)skb_tail_pointer(grp->rcvd_xid_skb);
 
@@ -1786,49 +1631,54 @@ static int mpc_validate_xid(struct mpcg_info *mpcginfo)
 		/* lower id assume the xside role */
 		if (our_id < their_id) {
 			grp->roll = XSIDE;
-			ctcm_pr_debug("ctcmpc :%s() WE HAVE LOW ID-"
-				       "TAKE XSIDE\n", __FUNCTION__);
+			CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE,
+				"%s(%s): WE HAVE LOW ID - TAKE XSIDE",
+					CTCM_FUNTAIL, ch->id);
 		} else {
 			grp->roll = YSIDE;
-			ctcm_pr_debug("ctcmpc :%s() WE HAVE HIGH ID-"
-				       "TAKE YSIDE\n", __FUNCTION__);
+			CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE,
+				"%s(%s): WE HAVE HIGH ID - TAKE YSIDE",
+					CTCM_FUNTAIL, ch->id);
 		}
 
 	} else {
 		if (xid->xid2_flag4 != grp->saved_xid2->xid2_flag4) {
-			failed = 1;
-			printk(KERN_INFO "%s XID REJECTED - XID Flag Byte4\n",
-			       __FUNCTION__);
+			rc = 3;
+			/* XID REJECTED: xid flag byte4 mismatch */
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): xid flag byte4 mismatch",
+					CTCM_FUNTAIL, ch->id);
 		}
 		if (xid->xid2_flag2 == 0x40) {
-			failed = 1;
-			printk(KERN_INFO "%s XID REJECTED - XID NOGOOD\n",
-			       __FUNCTION__);
+			rc = 4;
+			/* XID REJECTED - xid NOGOOD */
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): xid NOGOOD",
+					CTCM_FUNTAIL, ch->id);
 		}
 		if (xid->xid2_adj_id != grp->saved_xid2->xid2_adj_id) {
-			failed = 1;
-			printk(KERN_INFO "%s XID REJECTED - "
-				"Adjacent Station ID Mismatch\n",
-				__FUNCTION__);
+			rc = 5;
+			/* XID REJECTED - Adjacent Station ID Mismatch */
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): Adjacent Station ID Mismatch",
+					CTCM_FUNTAIL, ch->id);
 		}
 		if (xid->xid2_sender_id != grp->saved_xid2->xid2_sender_id) {
-			failed = 1;
-			printk(KERN_INFO "%s XID REJECTED - "
-				"Sender Address Mismatch\n", __FUNCTION__);
-
+			rc = 6;
+			/* XID REJECTED - Sender Address Mismatch */
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): Sender Address Mismatch",
+					CTCM_FUNTAIL, ch->id);
 		}
 	}
 
-	if (failed) {
+done:
+	if (rc) {
 		ctcm_pr_info("ctcmpc	   :  %s() failed\n", __FUNCTION__);
 		priv->xid->xid2_flag2 = 0x40;
 		grp->saved_xid2->xid2_flag2 = 0x40;
-		rc = 1;
 	}
 
-done:
-
-	ctcm_pr_debug("ctcmpc exit:  %s()\n", __FUNCTION__);
 	return rc;
 }
 
@@ -1839,46 +1689,20 @@ done:
 static void mpc_action_side_xid(fsm_instance *fsm, void *arg, int side)
 {
 	struct channel *ch = arg;
-	struct ctcm_priv *priv;
-	struct mpc_group *grp = NULL;
-	struct net_device *dev = NULL;
 	int rc = 0;
 	int gotlock = 0;
 	unsigned long saveflags = 0;	/* avoids compiler warning with
-			   spin_unlock_irqrestore */
-
-	if (ch == NULL)	{
-		printk(KERN_INFO "%s ch=NULL\n", __FUNCTION__);
-					goto done;
-	}
-
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n",
-			__FUNCTION__, smp_processor_id(), ch, ch->id);
-
-	dev = ch->netdev;
-	if (dev == NULL) {
-		printk(KERN_INFO "%s dev=NULL\n", __FUNCTION__);
-					goto done;
-	}
-
-	priv = dev->priv;
-	if (priv == NULL) {
-		printk(KERN_INFO "%s priv=NULL\n", __FUNCTION__);
-					goto done;
-	}
+					   spin_unlock_irqrestore */
 
-	grp = priv->mpcg;
-	if (grp == NULL) {
-		printk(KERN_INFO "%s grp=NULL\n", __FUNCTION__);
-					goto done;
-	}
+	CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
+			__func__, smp_processor_id(), ch, ch->id);
 
 	if (ctcm_checkalloc_buffer(ch))
 					goto done;
 
-	/* skb data-buffer referencing: */
-
+	/*
+	 * skb data-buffer referencing:
+	 */
 	ch->trans_skb->data = ch->trans_skb_data;
 	skb_reset_tail_pointer(ch->trans_skb);
 	ch->trans_skb->len = 0;
@@ -1911,22 +1735,22 @@ static void mpc_action_side_xid(fsm_instance *fsm, void *arg, int side)
 	ch->ccw[8].count	= 0;
 	ch->ccw[8].cda		= 0x00;
 
+	if (!(ch->xid_th && ch->xid && ch->xid_id))
+		CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_INFO,
+			"%s(%s): xid_th=%p, xid=%p, xid_id=%p",
+			CTCM_FUNTAIL, ch->id, ch->xid_th, ch->xid, ch->xid_id);
+
 	if (side == XSIDE) {
 		/* mpc_action_xside_xid */
-		if (ch->xid_th == NULL) {
-			printk(KERN_INFO "%s ch->xid_th=NULL\n", __FUNCTION__);
-					goto done;
-		}
+		if (ch->xid_th == NULL)
+				goto done;
 		ch->ccw[9].cmd_code	= CCW_CMD_WRITE;
 		ch->ccw[9].flags	= CCW_FLAG_SLI | CCW_FLAG_CC;
 		ch->ccw[9].count	= TH_HEADER_LENGTH;
 		ch->ccw[9].cda		= virt_to_phys(ch->xid_th);
 
-		if (ch->xid == NULL) {
-			printk(KERN_INFO "%s ch->xid=NULL\n", __FUNCTION__);
-					goto done;
-		}
-
+		if (ch->xid == NULL)
+				goto done;
 		ch->ccw[10].cmd_code	= CCW_CMD_WRITE;
 		ch->ccw[10].flags	= CCW_FLAG_SLI | CCW_FLAG_CC;
 		ch->ccw[10].count	= XID2_LENGTH;
@@ -1956,28 +1780,22 @@ static void mpc_action_side_xid(fsm_instance *fsm, void *arg, int side)
 		ch->ccw[10].count	= XID2_LENGTH;
 		ch->ccw[10].cda		= virt_to_phys(ch->rcvd_xid);
 
-		if (ch->xid_th == NULL)	{
-			printk(KERN_INFO "%s ch->xid_th=NULL\n", __FUNCTION__);
-					goto done;
-		}
+		if (ch->xid_th == NULL)
+				goto done;
 		ch->ccw[11].cmd_code	= CCW_CMD_WRITE;
 		ch->ccw[11].flags	= CCW_FLAG_SLI | CCW_FLAG_CC;
 		ch->ccw[11].count	= TH_HEADER_LENGTH;
 		ch->ccw[11].cda		= virt_to_phys(ch->xid_th);
 
-		if (ch->xid == NULL) {
-			printk(KERN_INFO "%s ch->xid=NULL\n", __FUNCTION__);
-					goto done;
-		}
+		if (ch->xid == NULL)
+				goto done;
 		ch->ccw[12].cmd_code	= CCW_CMD_WRITE;
 		ch->ccw[12].flags	= CCW_FLAG_SLI | CCW_FLAG_CC;
 		ch->ccw[12].count	= XID2_LENGTH;
 		ch->ccw[12].cda		= virt_to_phys(ch->xid);
 
-		if (ch->xid_id == NULL)	{
-			printk(KERN_INFO "%s ch->xid_id=NULL\n", __FUNCTION__);
-					goto done;
-		}
+		if (ch->xid_id == NULL)
+				goto done;
 		ch->ccw[13].cmd_code	= CCW_CMD_WRITE;
 		ch->ccw[13].cda		= virt_to_phys(ch->xid_id);
 
@@ -1990,12 +1808,11 @@ static void mpc_action_side_xid(fsm_instance *fsm, void *arg, int side)
 	ch->ccw[14].count	= 0;
 	ch->ccw[14].cda		= 0;
 
-	if (do_debug_ccw)
-		ctcmpc_dumpit((char *)&ch->ccw[8], sizeof(struct ccw1) * 7);
+	CTCM_CCW_DUMP((char *)&ch->ccw[8], sizeof(struct ccw1) * 7);
+	CTCM_D3_DUMP((char *)ch->xid_th, TH_HEADER_LENGTH);
+	CTCM_D3_DUMP((char *)ch->xid, XID2_LENGTH);
+	CTCM_D3_DUMP((char *)ch->xid_id, 4);
 
-	ctcmpc_dumpit((char *)ch->xid_th, TH_HEADER_LENGTH);
-	ctcmpc_dumpit((char *)ch->xid, XID2_LENGTH);
-	ctcmpc_dumpit((char *)ch->xid_id, 4);
 	if (!in_irq()) {
 			 /* Such conditional locking is a known problem for
 			  * sparse because its static undeterministic.
@@ -2012,16 +1829,13 @@ static void mpc_action_side_xid(fsm_instance *fsm, void *arg, int side)
 		spin_unlock_irqrestore(get_ccwdev_lock(ch->cdev), saveflags);
 
 	if (rc != 0) {
-		ctcm_pr_info("ctcmpc: %s() ch:%s IO failed \n",
-				__FUNCTION__, ch->id);
 		ctcm_ccw_check_rc(ch, rc,
 				(side == XSIDE) ? "x-side XID" : "y-side XID");
 	}
 
 done:
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n",
-				__FUNCTION__, ch, ch->id);
+	CTCM_PR_DEBUG("Exit %s: ch=0x%p id=%s\n",
+				__func__, ch, ch->id);
 	return;
 
 }
@@ -2050,41 +1864,19 @@ static void mpc_action_yside_xid(fsm_instance *fsm, int event, void *arg)
  */
 static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg)
 {
-	struct channel	   *ch = arg;
-	struct ctcm_priv    *priv;
-	struct mpc_group   *grp     = NULL;
-	struct net_device *dev = NULL;
-
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n",
-			__FUNCTION__, smp_processor_id(), ch, ch->id);
-
-	if (ch == NULL) {
-		printk(KERN_WARNING "%s ch=NULL\n", __FUNCTION__);
-					goto done;
-	}
-
-	dev = ch->netdev;
-	if (dev == NULL) {
-		printk(KERN_WARNING "%s dev=NULL\n", __FUNCTION__);
-					goto done;
-	}
-
-	priv = dev->priv;
-	if (priv == NULL) {
-		printk(KERN_WARNING "%s priv=NULL\n", __FUNCTION__);
-					goto done;
-	}
+	struct channel	   *ch   = arg;
+	struct net_device  *dev  = ch->netdev;
+	struct ctcm_priv   *priv = dev->priv;
+	struct mpc_group   *grp  = priv->mpcg;
 
-	grp = priv->mpcg;
-	if (grp == NULL) {
-		printk(KERN_WARNING "%s grp=NULL\n", __FUNCTION__);
-					goto done;
-	}
+	CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
+			__func__, smp_processor_id(), ch, ch->id);
 
 	if (ch->xid == NULL) {
-		printk(KERN_WARNING "%s ch-xid=NULL\n", __FUNCTION__);
-					goto done;
+		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+			"%s(%s): ch->xid == NULL",
+				CTCM_FUNTAIL, dev->name);
+		return;
 	}
 
 	fsm_newstate(ch->fsm, CH_XID0_INPROGRESS);
@@ -2104,12 +1896,7 @@ static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg)
 
 	fsm_event(grp->fsm, MPCG_EVENT_DOIO, ch);
 
-done:
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit : %s(): ch=0x%p id=%s\n",
-			__FUNCTION__, ch, ch->id);
 	return;
-
 }
 
 /*
@@ -2119,32 +1906,16 @@ done:
 static void mpc_action_doxid7(fsm_instance *fsm, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv   *priv = NULL;
-	struct mpc_group  *grp = NULL;
+	struct ctcm_priv  *priv = dev->priv;
+	struct mpc_group  *grp  = NULL;
 	int direction;
-	int rc = 0;
 	int send = 0;
 
-	ctcm_pr_debug("ctcmpc enter:	%s() \n", __FUNCTION__);
-
-	if (dev == NULL) {
-		printk(KERN_INFO "%s dev=NULL \n", __FUNCTION__);
-		rc = 1;
-					goto done;
-	}
-
-	priv = dev->priv;
-	if (priv == NULL) {
-		printk(KERN_INFO "%s priv=NULL \n", __FUNCTION__);
-		rc = 1;
-					goto done;
-	}
-
-	grp = priv->mpcg;
+	if (priv)
+		grp = priv->mpcg;
 	if (grp == NULL) {
-		printk(KERN_INFO "%s grp=NULL \n", __FUNCTION__);
-		rc = 1;
-					goto done;
+		fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
+		return;
 	}
 
 	for (direction = READ; direction <= WRITE; direction++)	{
@@ -2199,11 +1970,6 @@ static void mpc_action_doxid7(fsm_instance *fsm, int event, void *arg)
 			fsm_event(grp->fsm, MPCG_EVENT_DOIO, ch);
 	}
 
-done:
-
-	if (rc != 0)
-		fsm_event(grp->fsm, MPCG_EVENT_INOP, dev);
-
 	return;
 }
 
@@ -2214,24 +1980,15 @@ done:
 static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg)
 {
 
-	struct mpcg_info   *mpcginfo   = arg;
-	struct channel	   *ch	       = mpcginfo->ch;
-	struct net_device  *dev        = ch->netdev;
-	struct ctcm_priv   *priv;
-	struct mpc_group   *grp;
-
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n",
-			__FUNCTION__, smp_processor_id(), ch, ch->id);
-
-	priv = dev->priv;
-	grp = priv->mpcg;
+	struct mpcg_info   *mpcginfo  = arg;
+	struct channel	   *ch   = mpcginfo->ch;
+	struct net_device  *dev  = ch->netdev;
+	struct ctcm_priv   *priv = dev->priv;
+	struct mpc_group   *grp  = priv->mpcg;
 
-	ctcm_pr_debug("ctcmpc in:%s() %s xid2:%i xid7:%i xidt_p2:%i \n",
-		       __FUNCTION__, ch->id,
-		       grp->outstanding_xid2,
-		       grp->outstanding_xid7,
-		       grp->outstanding_xid7_p2);
+	CTCM_PR_DEBUG("%s: ch-id:%s xid2:%i xid7:%i xidt_p2:%i \n",
+			__func__, ch->id, grp->outstanding_xid2,
+			grp->outstanding_xid7, grp->outstanding_xid7_p2);
 
 	if (fsm_getstate(ch->fsm) < CH_XID7_PENDING)
 		fsm_newstate(ch->fsm, CH_XID7_PENDING);
@@ -2268,17 +2025,12 @@ static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg)
 	}
 	kfree(mpcginfo);
 
-	if (do_debug) {
-		ctcm_pr_debug("ctcmpc:%s() %s xid2:%i xid7:%i xidt_p2:%i \n",
-				__FUNCTION__, ch->id,
-				grp->outstanding_xid2,
-				grp->outstanding_xid7,
-				grp->outstanding_xid7_p2);
-		ctcm_pr_debug("ctcmpc:%s() %s grpstate: %s chanstate: %s \n",
-				__FUNCTION__, ch->id,
-				fsm_getstate_str(grp->fsm),
-				fsm_getstate_str(ch->fsm));
-	}
+	CTCM_PR_DEBUG("ctcmpc:%s() %s xid2:%i xid7:%i xidt_p2:%i \n",
+		__func__, ch->id, grp->outstanding_xid2,
+		grp->outstanding_xid7, grp->outstanding_xid7_p2);
+	CTCM_PR_DEBUG("ctcmpc:%s() %s grpstate: %s chanstate: %s \n",
+		__func__, ch->id,
+		fsm_getstate_str(grp->fsm), fsm_getstate_str(ch->fsm));
 	return;
 
 }
@@ -2296,15 +2048,10 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg)
 	struct ctcm_priv   *priv    = dev->priv;
 	struct mpc_group   *grp     = priv->mpcg;
 
-	if (do_debug) {
-		ctcm_pr_debug("ctcmpc enter: %s(): cp=%i ch=0x%p id=%s\n",
-				__FUNCTION__, smp_processor_id(), ch, ch->id);
-
-		ctcm_pr_debug("ctcmpc:  outstanding_xid7: %i, "
-				" outstanding_xid7_p2: %i\n",
-				grp->outstanding_xid7,
-				grp->outstanding_xid7_p2);
-	}
+	CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
+		__func__, smp_processor_id(), ch, ch->id);
+	CTCM_PR_DEBUG("%s: outstanding_xid7: %i, outstanding_xid7_p2: %i\n",
+		__func__, grp->outstanding_xid7, grp->outstanding_xid7_p2);
 
 	grp->outstanding_xid7--;
 	ch->xid_skb->data = ch->xid_skb_data;
@@ -2337,14 +2084,8 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg)
 		mpc_validate_xid(mpcginfo);
 		break;
 	}
-
 	kfree(mpcginfo);
-
-	if (do_debug)
-		ctcm_pr_debug("ctcmpc exit: %s(): cp=%i ch=0x%p id=%s\n",
-			__FUNCTION__, smp_processor_id(), ch, ch->id);
 	return;
-
 }
 
 /*
@@ -2353,36 +2094,14 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg)
  */
 static int mpc_send_qllc_discontact(struct net_device *dev)
 {
-	int	rc	= 0;
 	__u32	new_len	= 0;
 	struct sk_buff   *skb;
 	struct qllc      *qllcptr;
-	struct ctcm_priv *priv;
-	struct mpc_group *grp;
-
-	ctcm_pr_debug("ctcmpc enter:	%s()\n", __FUNCTION__);
-
-	if (dev == NULL) {
-		printk(KERN_INFO "%s() dev=NULL\n", __FUNCTION__);
-		rc = 1;
-					goto done;
-	}
-
-	priv = dev->priv;
-	if (priv == NULL) {
-		printk(KERN_INFO "%s() priv=NULL\n", __FUNCTION__);
-		rc = 1;
-					goto done;
-	}
+	struct ctcm_priv *priv = dev->priv;
+	struct mpc_group *grp = priv->mpcg;
 
-	grp = priv->mpcg;
-	if (grp == NULL) {
-		printk(KERN_INFO "%s() grp=NULL\n", __FUNCTION__);
-		rc = 1;
-					goto done;
-	}
-	ctcm_pr_info("ctcmpc: %s() GROUP STATE: %s\n", __FUNCTION__,
-			mpcg_state_names[grp->saved_state]);
+	CTCM_PR_DEBUG("%s: GROUP STATE: %s\n",
+		__func__, mpcg_state_names[grp->saved_state]);
 
 	switch (grp->saved_state) {
 	/*
@@ -2408,11 +2127,10 @@ static int mpc_send_qllc_discontact(struct net_device *dev)
 		new_len = sizeof(struct qllc);
 		qllcptr = kzalloc(new_len, gfp_type() | GFP_DMA);
 		if (qllcptr == NULL) {
-			printk(KERN_INFO
-			       "ctcmpc: Out of memory in %s()\n",
-			       dev->name);
-			rc = 1;
-				goto done;
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): qllcptr allocation error",
+						CTCM_FUNTAIL, dev->name);
+			return -ENOMEM;
 		}
 
 		qllcptr->qllc_address = 0xcc;
@@ -2421,31 +2139,29 @@ static int mpc_send_qllc_discontact(struct net_device *dev)
 		skb = __dev_alloc_skb(new_len, GFP_ATOMIC);
 
 		if (skb == NULL) {
-			printk(KERN_INFO "%s Out of memory in mpc_send_qllc\n",
-			       dev->name);
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): skb allocation error",
+						CTCM_FUNTAIL, dev->name);
 			priv->stats.rx_dropped++;
-			rc = 1;
 			kfree(qllcptr);
-				goto done;
+			return -ENOMEM;
 		}
 
 		memcpy(skb_put(skb, new_len), qllcptr, new_len);
 		kfree(qllcptr);
 
 		if (skb_headroom(skb) < 4) {
-			printk(KERN_INFO "ctcmpc: %s() Unable to"
-			       " build discontact for %s\n",
-			       __FUNCTION__, dev->name);
-			rc = 1;
+			CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
+				"%s(%s): skb_headroom error",
+						CTCM_FUNTAIL, dev->name);
 			dev_kfree_skb_any(skb);
-				goto done;
+			return -ENOMEM;
 		}
 
 		*((__u32 *)skb_push(skb, 4)) = priv->channel[READ]->pdu_seq;
 		priv->channel[READ]->pdu_seq++;
-		if (do_debug_data)
-			ctcm_pr_debug("ctcmpc: %s ToDCM_pdu_seq= %08x\n",
-				__FUNCTION__, priv->channel[READ]->pdu_seq);
+		CTCM_PR_DBGDATA("ctcmpc: %s ToDCM_pdu_seq= %08x\n",
+				__func__, priv->channel[READ]->pdu_seq);
 
 		/* receipt of CC03 resets anticipated sequence number on
 		      receiving side */
@@ -2455,7 +2171,7 @@ static int mpc_send_qllc_discontact(struct net_device *dev)
 		skb->protocol = htons(ETH_P_SNAP);
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-		ctcmpc_dumpit((char *)skb->data, (sizeof(struct qllc) + 4));
+		CTCM_D3_DUMP(skb->data, (sizeof(struct qllc) + 4));
 
 		netif_rx(skb);
 		break;
@@ -2464,9 +2180,7 @@ static int mpc_send_qllc_discontact(struct net_device *dev)
 
 	}
 
-done:
-	ctcm_pr_debug("ctcmpc exit:  %s()\n", __FUNCTION__);
-	return rc;
+	return 0;
 }
 /* --- This is the END my friend --- */
 
diff --git a/drivers/s390/net/ctcm_mpc.h b/drivers/s390/net/ctcm_mpc.h
index f99686069a9..5336120cddf 100644
--- a/drivers/s390/net/ctcm_mpc.h
+++ b/drivers/s390/net/ctcm_mpc.h
@@ -231,7 +231,7 @@ static inline void ctcmpc_dump32(char *buf, int len)
 int ctcmpc_open(struct net_device *);
 void ctcm_ccw_check_rc(struct channel *, int, char *);
 void mpc_group_ready(unsigned long adev);
-int mpc_channel_action(struct channel *ch, int direction, int action);
+void mpc_channel_action(struct channel *ch, int direction, int action);
 void mpc_action_send_discontact(unsigned long thischan);
 void mpc_action_discontact(fsm_instance *fi, int event, void *arg);
 void ctcmpc_bh(unsigned long thischan);
-- 
cgit v1.2.3


From 23fcc8d991c7f7bf3eaa64c296217103ab59f5dc Mon Sep 17 00:00:00 2001
From: Ursula Braun <ursula.braun@de.ibm.com>
Date: Fri, 18 Jul 2008 15:24:58 +0200
Subject: MAINTAINERS: Update email address of Ursula Braun

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index ec0c9c914f1..8c44572c172 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3527,7 +3527,7 @@ S:	Supported
 
 S390 NETWORK DRIVERS
 P:	Ursula Braun
-M:	ubraun@linux.vnet.ibm.com
+M:	ursula.braun@de.ibm.com
 P:	Frank Blaschka
 M:	blaschka@linux.vnet.ibm.com
 M:	linux390@de.ibm.com
@@ -3547,7 +3547,7 @@ S:	Supported
 
 S390 IUCV NETWORK LAYER
 P:	Ursula Braun
-M:	ubraun@linux.vnet.ibm.com
+M:	ursula.braun@de.ibm.com
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
-- 
cgit v1.2.3


From f8e5e776a3ac29705b1a357b23cad0920ef1a1d2 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 17 Jul 2008 20:29:13 +0100
Subject: DM9000: Remove magic numbers

Remove magic numbers for items that we already have
defined in the register header file.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/dm9000.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 952e10d686e..0b0f1c407a7 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -888,19 +888,22 @@ dm9000_rx(struct net_device *dev)
 			dev_dbg(db->dev, "RST: RX Len:%x\n", RxLen);
 		}
 
-		if (rxhdr.RxStatus & 0xbf) {
+		/* rxhdr.RxStatus is identical to RSR register. */
+		if (rxhdr.RxStatus & (RSR_FOE | RSR_CE | RSR_AE |
+				      RSR_PLE | RSR_RWTO |
+				      RSR_LCS | RSR_RF)) {
 			GoodPacket = false;
-			if (rxhdr.RxStatus & 0x01) {
+			if (rxhdr.RxStatus & RSR_FOE) {
 				if (netif_msg_rx_err(db))
 					dev_dbg(db->dev, "fifo error\n");
 				dev->stats.rx_fifo_errors++;
 			}
-			if (rxhdr.RxStatus & 0x02) {
+			if (rxhdr.RxStatus & RSR_CE) {
 				if (netif_msg_rx_err(db))
 					dev_dbg(db->dev, "crc error\n");
 				dev->stats.rx_crc_errors++;
 			}
-			if (rxhdr.RxStatus & 0x80) {
+			if (rxhdr.RxStatus & RSR_RF) {
 				if (netif_msg_rx_err(db))
 					dev_dbg(db->dev, "length error\n");
 				dev->stats.rx_length_errors++;
@@ -1067,7 +1070,7 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
 	/* Fill the phyxcer register into REG_0C */
 	iow(db, DM9000_EPAR, DM9000_PHY | reg);
 
-	iow(db, DM9000_EPCR, 0xc);	/* Issue phyxcer read command */
+	iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS);	/* Issue phyxcer read command */
 
 	writeb(reg_save, db->io_addr);
 	spin_unlock_irqrestore(&db->lock,flags);
@@ -1118,7 +1121,7 @@ dm9000_phy_write(struct net_device *dev,
 	iow(db, DM9000_EPDRL, value);
 	iow(db, DM9000_EPDRH, value >> 8);
 
-	iow(db, DM9000_EPCR, 0xa);	/* Issue phyxcer write command */
+	iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW);	/* Issue phyxcer write command */
 
 	writeb(reg_save, db->io_addr);
 	spin_unlock_irqrestore(&db->lock, flags);
-- 
cgit v1.2.3


From 25ac3c24839002298e9329a5fda305e5383b1dc7 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Wed, 16 Jul 2008 12:45:27 -0700
Subject: net: igb_main.c fix sparse integer as NULL pointer warning

drivers/net/igb/igb_main.c:388:20: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/igb/igb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 1b7cb29fe68..b602c4dd0d1 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -385,7 +385,7 @@ static void igb_configure_msix(struct igb_adapter *adapter)
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		struct igb_ring *rx_ring = &adapter->rx_ring[i];
-		rx_ring->buddy = 0;
+		rx_ring->buddy = NULL;
 		igb_assign_vector(adapter, i, IGB_N0_QUEUE, vector++);
 		adapter->eims_enable_mask |= rx_ring->eims_value;
 		if (rx_ring->itr_val)
-- 
cgit v1.2.3


From c0e5a8c21bb9bb222917c36eba503ae88af52c34 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Wed, 16 Jul 2008 12:45:34 -0700
Subject: net: tun.c fix cast

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/tun.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index a82b32b4013..e6bbc639c2d 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -900,7 +900,7 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 		if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV)
 			return -EINVAL;
 		rtnl_lock();
-		ret = update_filter(&tun->txflt, (void *) __user arg);
+		ret = update_filter(&tun->txflt, (void __user *)arg);
 		rtnl_unlock();
 		return ret;
 
-- 
cgit v1.2.3


From 9cf8fa4334e60f27b4a392f432c292f3af268215 Mon Sep 17 00:00:00 2001
From: Wang Jian <lark@linux.net.cn>
Date: Wed, 16 Jul 2008 21:46:17 +0800
Subject: net/phy: Fix copper/fiber auto-selection for 88e1111

The 27.15 bit (MII_M1111_HWCFG_FIBER_COPPER_AUTO) is disable bit. When
set to 1, copper/fiber auto selection is disabled. The current code
to enable but actually disable auto selection.

Signed-off-by: Wang Jian <lark@linux.net.cn>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/phy/marvell.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 32a8503a7ac..737512c0097 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -162,7 +162,7 @@ static int m88e1111_config_init(struct phy_device *phydev)
 
 	/* Enable Fiber/Copper auto selection */
 	temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
-	temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+	temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO;
 	phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 
 	temp = phy_read(phydev, MII_BMCR);
-- 
cgit v1.2.3


From 7239016d52c6d568d069f083bdcd17f35ab79fd8 Mon Sep 17 00:00:00 2001
From: Wang Jian <lark@linux.net.cn>
Date: Wed, 16 Jul 2008 21:46:20 +0800
Subject: net/phy: Fix 88e1111 copper/fiber selection in RGMII mode

MII_M1111_HWCFG_FIBER_COPPER_RES is a bit of MII_M1111_PHY_EXT_SR, not
MII_M1111_PHY_EXT_CR.

Signed-off-by: Wang Jian <lark@linux.net.cn>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/phy/marvell.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 737512c0097..4aa54794704 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -158,7 +158,6 @@ static int m88e1111_config_init(struct phy_device *phydev)
 {
 	int err;
 	int temp;
-	int mode;
 
 	/* Enable Fiber/Copper auto selection */
 	temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
@@ -198,9 +197,7 @@ static int m88e1111_config_init(struct phy_device *phydev)
 
 		temp &= ~(MII_M1111_HWCFG_MODE_MASK);
 
-		mode = phy_read(phydev, MII_M1111_PHY_EXT_CR);
-
-		if (mode & MII_M1111_HWCFG_FIBER_COPPER_RES)
+		if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
 			temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
 		else
 			temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
-- 
cgit v1.2.3


From eb5813481a97582c80c8d402ecb371149c77b4e0 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Tue, 15 Jul 2008 19:54:53 -0400
Subject: 8139too: Make PIO/MMIO a runtime decision through a module parameter.

This is needed to support devices that only work with PIO without
penalising devices that work fine with MMIO in distro kernels.
It also allows us to eventually use PIO as a fallback when setting
up MMIO fails.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/8139too.c | 128 +++++++++++++++++++++++++-------------------------
 1 file changed, 64 insertions(+), 64 deletions(-)

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 75317a14ad1..f172b5d822d 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -98,7 +98,6 @@
 #include <linux/compiler.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/ioport.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
@@ -120,11 +119,6 @@
                                  NETIF_MSG_LINK)
 
 
-/* enable PIO instead of MMIO, if CONFIG_8139TOO_PIO is selected */
-#ifdef CONFIG_8139TOO_PIO
-#define USE_IO_OPS 1
-#endif
-
 /* define to 1, 2 or 3 to enable copious debugging info */
 #define RTL8139_DEBUG 0
 
@@ -156,6 +150,13 @@
 static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
    The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
 static int multicast_filter_limit = 32;
@@ -614,6 +615,8 @@ MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
 module_param(multicast_filter_limit, int, 0);
 module_param_array(media, int, NULL, 0);
 module_param_array(full_duplex, int, NULL, 0);
@@ -709,13 +712,8 @@ static void __rtl8139_cleanup_dev (struct net_device *dev)
 	assert (tp->pci_dev != NULL);
 	pdev = tp->pci_dev;
 
-#ifdef USE_IO_OPS
-	if (tp->mmio_addr)
-		ioport_unmap (tp->mmio_addr);
-#else
 	if (tp->mmio_addr)
 		pci_iounmap (pdev, tp->mmio_addr);
-#endif /* USE_IO_OPS */
 
 	/* it's ok to call this even if we have no regions to free */
 	pci_release_regions (pdev);
@@ -790,32 +788,32 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	DPRINTK("PIO region size == 0x%02X\n", pio_len);
 	DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
 
-#ifdef USE_IO_OPS
-	/* make sure PCI base addr 0 is PIO */
-	if (!(pio_flags & IORESOURCE_IO)) {
-		dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-	/* check for weird/broken PCI region reporting */
-	if (pio_len < RTL_MIN_IO_SIZE) {
-		dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-#else
-	/* make sure PCI base addr 1 is MMIO */
-	if (!(mmio_flags & IORESOURCE_MEM)) {
-		dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-	if (mmio_len < RTL_MIN_IO_SIZE) {
-		dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
-		rc = -ENODEV;
-		goto err_out;
+	if (use_io) {
+		/* make sure PCI base addr 0 is PIO */
+		if (!(pio_flags & IORESOURCE_IO)) {
+			dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		/* check for weird/broken PCI region reporting */
+		if (pio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+	} else {
+		/* make sure PCI base addr 1 is MMIO */
+		if (!(mmio_flags & IORESOURCE_MEM)) {
+			dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		if (mmio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
 	}
-#endif
 
 	rc = pci_request_regions (pdev, DRV_NAME);
 	if (rc)
@@ -825,28 +823,27 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	/* enable PCI bus-mastering */
 	pci_set_master (pdev);
 
-#ifdef USE_IO_OPS
-	ioaddr = ioport_map(pio_start, pio_len);
-	if (!ioaddr) {
-		dev_err(&pdev->dev, "cannot map PIO, aborting\n");
-		rc = -EIO;
-		goto err_out;
-	}
-	dev->base_addr = pio_start;
-	tp->mmio_addr = ioaddr;
-	tp->regs_len = pio_len;
-#else
-	/* ioremap MMIO region */
-	ioaddr = pci_iomap(pdev, 1, 0);
-	if (ioaddr == NULL) {
-		dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
-		rc = -EIO;
-		goto err_out;
+	if (use_io) {
+		ioaddr = pci_iomap(pdev, 0, 0);
+		if (!ioaddr) {
+			dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+			rc = -EIO;
+			goto err_out;
+		}
+		dev->base_addr = pio_start;
+		tp->regs_len = pio_len;
+	} else {
+		/* ioremap MMIO region */
+		ioaddr = pci_iomap(pdev, 1, 0);
+		if (ioaddr == NULL) {
+			dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
+			rc = -EIO;
+			goto err_out;
+		}
+		dev->base_addr = (long) ioaddr;
+		tp->regs_len = mmio_len;
 	}
-	dev->base_addr = (long) ioaddr;
 	tp->mmio_addr = ioaddr;
-	tp->regs_len = mmio_len;
-#endif /* USE_IO_OPS */
 
 	/* Bring old chips out of low-power mode. */
 	RTL_W8 (HltClk, 'R');
@@ -2381,20 +2378,24 @@ static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
 	np->msg_enable = datum;
 }
 
-/* TODO: we are too slack to do reg dumping for pio, for now */
-#ifdef CONFIG_8139TOO_PIO
-#define rtl8139_get_regs_len	NULL
-#define rtl8139_get_regs	NULL
-#else
 static int rtl8139_get_regs_len(struct net_device *dev)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *np;
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return 0;
+	np = netdev_priv(dev);
 	return np->regs_len;
 }
 
 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *np;
+
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return;
+	np = netdev_priv(dev);
 
 	regs->version = RTL_REGS_VER;
 
@@ -2402,7 +2403,6 @@ static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	memcpy_fromio(regbuf, np->mmio_addr, regs->len);
 	spin_unlock_irq(&np->lock);
 }
-#endif /* CONFIG_8139TOO_MMIO */
 
 static int rtl8139_get_sset_count(struct net_device *dev, int sset)
 {
-- 
cgit v1.2.3


From 152151daece9d5dfd86e652b95846072c0d2b566 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Tue, 15 Jul 2008 19:54:53 -0400
Subject: 8139too: Force usage of PIO on OQO2

The OQO model 2 has an RTL8139 from Atheros that doesn't like MMIO.
It fails on modprobe, with a 'PCI Bus error' message.

Force it to always use polled IO.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/8139too.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index f172b5d822d..f62ac64e98f 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -949,6 +949,14 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 			   "Use the \"8139cp\" driver for improved performance and stability.\n");
 	}
 
+	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+	    pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+		printk(KERN_INFO "8139too: OQO Model 2 detected. Forcing PIO\n");
+		use_io = 1;
+	}
+
 	i = rtl8139_init_board (pdev, &dev);
 	if (i < 0)
 		return i;
-- 
cgit v1.2.3


From 1a4dc68b31fd04573ab3c554702372941a4fd46f Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Tue, 15 Jul 2008 19:54:52 -0400
Subject: 8139too: Fall back to PIO when MMIO fails.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/8139too.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index f62ac64e98f..8a5b0d293f7 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -788,6 +788,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	DPRINTK("PIO region size == 0x%02X\n", pio_len);
 	DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
 
+retry:
 	if (use_io) {
 		/* make sure PCI base addr 0 is PIO */
 		if (!(pio_flags & IORESOURCE_IO)) {
@@ -836,9 +837,10 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 		/* ioremap MMIO region */
 		ioaddr = pci_iomap(pdev, 1, 0);
 		if (ioaddr == NULL) {
-			dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
-			rc = -EIO;
-			goto err_out;
+			dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+			pci_release_regions(pdev);
+			use_io = 1;
+			goto retry;
 		}
 		dev->base_addr = (long) ioaddr;
 		tp->regs_len = mmio_len;
-- 
cgit v1.2.3


From f17a077e61b627e58db5926bc474cf308318dad9 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Tue, 22 Jul 2008 14:40:47 -0700
Subject: PCI: fixup sparse endianness warnings in proc.c

drivers/pci/proc.c:91:3: warning: cast from restricted __le16
drivers/pci/proc.c:100:3: warning: cast from restricted __le32
drivers/pci/proc.c:109:3: warning: cast from restricted __le16
drivers/pci/proc.c:161:40: warning: cast to restricted __le16
drivers/pci/proc.c:170:41: warning: cast to restricted __le32
drivers/pci/proc.c:179:40: warning: cast to restricted __le16

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/proc.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 4400dffbd93..e1098c302c4 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -88,7 +88,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp
 	if ((pos & 3) && cnt > 2) {
 		unsigned short val;
 		pci_user_read_config_word(dev, pos, &val);
-		__put_user(cpu_to_le16(val), (unsigned short __user *) buf);
+		__put_user(cpu_to_le16(val), (__le16 __user *) buf);
 		buf += 2;
 		pos += 2;
 		cnt -= 2;
@@ -97,7 +97,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp
 	while (cnt >= 4) {
 		unsigned int val;
 		pci_user_read_config_dword(dev, pos, &val);
-		__put_user(cpu_to_le32(val), (unsigned int __user *) buf);
+		__put_user(cpu_to_le32(val), (__le32 __user *) buf);
 		buf += 4;
 		pos += 4;
 		cnt -= 4;
@@ -106,7 +106,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp
 	if (cnt >= 2) {
 		unsigned short val;
 		pci_user_read_config_word(dev, pos, &val);
-		__put_user(cpu_to_le16(val), (unsigned short __user *) buf);
+		__put_user(cpu_to_le16(val), (__le16 __user *) buf);
 		buf += 2;
 		pos += 2;
 		cnt -= 2;
@@ -156,8 +156,8 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof
 	}
 
 	if ((pos & 3) && cnt > 2) {
-		unsigned short val;
-		__get_user(val, (unsigned short __user *) buf);
+		__le16 val;
+		__get_user(val, (__le16 __user *) buf);
 		pci_user_write_config_word(dev, pos, le16_to_cpu(val));
 		buf += 2;
 		pos += 2;
@@ -165,8 +165,8 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof
 	}
 
 	while (cnt >= 4) {
-		unsigned int val;
-		__get_user(val, (unsigned int __user *) buf);
+		__le32 val;
+		__get_user(val, (__le32 __user *) buf);
 		pci_user_write_config_dword(dev, pos, le32_to_cpu(val));
 		buf += 4;
 		pos += 4;
@@ -174,8 +174,8 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof
 	}
 
 	if (cnt >= 2) {
-		unsigned short val;
-		__get_user(val, (unsigned short __user *) buf);
+		__le16 val;
+		__get_user(val, (__le16 __user *) buf);
 		pci_user_write_config_word(dev, pos, le16_to_cpu(val));
 		buf += 2;
 		pos += 2;
-- 
cgit v1.2.3


From c8f15686a4b3345e3e81e09cfe191df58bbedd45 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Tue, 22 Jul 2008 15:41:24 -0700
Subject: netdev: bunch of drivers: avoid WARN at net/core/dev.c:1328

The drivers were touching net queue before it has been started, so
without this patch, the drivers will potentially WARN at
net/core/dev.c:1328.

I don't have the hardware for the drivers below, so this patch is
untested, and thus should be carefully peer reviewed.

tc35815.c
au1000_eth.c
bfin_mac.c
macb.c
^ The four drivers are using phylib, they're calling netif_start_queue()
in open() callback. So trivially remove netif_tx_schedule_all().
Phylib will handle netif_carrier_*().

cpmac.c
fec_mpc52xx.c
fs_enet/fs_enet-main.c
sh_eth.c
^ The same as above, but these were also needlessly calling
netif_carrier_*() functions. So removed queue calls and also remove
carrier calls, since phylib will handle it. fs_enet-main.c also didn't
call netif_start_queue() at open(), this is fixed now.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/au1000_eth.c           | 5 ++---
 drivers/net/bfin_mac.c             | 1 -
 drivers/net/cpmac.c                | 2 --
 drivers/net/fec_mpc52xx.c          | 5 -----
 drivers/net/fs_enet/fs_enet-main.c | 7 ++-----
 drivers/net/macb.c                 | 4 +---
 drivers/net/sh_eth.c               | 5 -----
 drivers/net/tc35815.c              | 1 -
 8 files changed, 5 insertions(+), 25 deletions(-)

diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 3ab61e40e86..cb8be490e5a 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -911,9 +911,8 @@ au1000_adjust_link(struct net_device *dev)
 	if(phydev->link != aup->old_link) {
 		// link state changed
 
-		if (phydev->link) // link went up
-			netif_tx_schedule_all(dev);
-		else { // link went down
+		if (!phydev->link) {
+			/* link went down */
 			aup->old_speed = 0;
 			aup->old_duplex = -1;
 		}
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index a6a3da89f59..a8ec60e1ed7 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -357,7 +357,6 @@ static void bfin_mac_adjust_link(struct net_device *dev)
 		if (!lp->old_link) {
 			new_state = 1;
 			lp->old_link = 1;
-			netif_tx_schedule_all(dev);
 		}
 	} else if (lp->old_link) {
 		new_state = 1;
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index fbd4280c102..a7800e55909 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -945,10 +945,8 @@ static void cpmac_adjust_link(struct net_device *dev)
 		if (!priv->oldlink) {
 			new_state = 1;
 			priv->oldlink = 1;
-			netif_tx_schedule_all(dev);
 		}
 	} else if (priv->oldlink) {
-		netif_tx_stop_all_queues(dev);
 		new_state = 1;
 		priv->oldlink = 0;
 		priv->oldspeed = 0;
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index ae9ecb7df22..4e4f68304e8 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -197,9 +197,6 @@ static void mpc52xx_fec_adjust_link(struct net_device *dev)
 		if (priv->link == PHY_DOWN) {
 			new_state = 1;
 			priv->link = phydev->link;
-			netif_tx_schedule_all(dev);
-			netif_carrier_on(dev);
-			netif_start_queue(dev);
 		}
 
 	} else if (priv->link) {
@@ -207,8 +204,6 @@ static void mpc52xx_fec_adjust_link(struct net_device *dev)
 		priv->link = PHY_DOWN;
 		priv->speed = 0;
 		priv->duplex = -1;
-		netif_stop_queue(dev);
-		netif_carrier_off(dev);
 	}
 
 	if (new_state && netif_msg_link(priv))
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 445763e5648..52911889fd1 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -738,9 +738,6 @@ static void generic_adjust_link(struct  net_device *dev)
 		if (!fep->oldlink) {
 			new_state = 1;
 			fep->oldlink = 1;
-			netif_tx_schedule_all(dev);
-			netif_carrier_on(dev);
-			netif_start_queue(dev);
 		}
 
 		if (new_state)
@@ -750,8 +747,6 @@ static void generic_adjust_link(struct  net_device *dev)
 		fep->oldlink = 0;
 		fep->oldspeed = 0;
 		fep->oldduplex = -1;
-		netif_carrier_off(dev);
-		netif_stop_queue(dev);
 	}
 
 	if (new_state && netif_msg_link(fep))
@@ -826,6 +821,8 @@ static int fs_enet_open(struct net_device *dev)
 	}
 	phy_start(fep->phydev);
 
+	netif_start_queue(dev);
+
 	return 0;
 }
 
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 0496d16f9de..daba82bbcb5 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -164,9 +164,7 @@ static void macb_handle_link_change(struct net_device *dev)
 	}
 
 	if (phydev->link != bp->link) {
-		if (phydev->link)
-			netif_tx_schedule_all(dev);
-		else {
+		if (!phydev->link) {
 			bp->speed = 0;
 			bp->duplex = -1;
 		}
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index a4bc812aa99..c69ba1395fa 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -642,17 +642,12 @@ static void sh_eth_adjust_link(struct net_device *ndev)
 					| ECMR_DM, ioaddr + ECMR);
 			new_state = 1;
 			mdp->link = phydev->link;
-			netif_tx_schedule_all(ndev);
-			netif_carrier_on(ndev);
-			netif_start_queue(ndev);
 		}
 	} else if (mdp->link) {
 		new_state = 1;
 		mdp->link = PHY_DOWN;
 		mdp->speed = 0;
 		mdp->duplex = -1;
-		netif_stop_queue(ndev);
-		netif_carrier_off(ndev);
 	}
 
 	if (new_state)
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 41d3ac45685..a645e5028c1 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -672,7 +672,6 @@ static void tc_handle_link_change(struct net_device *dev)
 			if (dev->flags & IFF_PROMISC)
 				tc35815_set_multicast_list(dev);
 #endif
-			netif_tx_schedule_all(dev);
 		} else {
 			lp->speed = 0;
 			lp->duplex = -1;
-- 
cgit v1.2.3


From 4a0a088970a553e9f89d23eec688932f689d57f9 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 22 Jul 2008 15:47:17 -0700
Subject: sparc32: pass -m32 when building vmlinux.lds

Otherwise it breaks since we merged asm/page.h

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index fef28e267a5..6668e6037af 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -18,6 +18,7 @@ CHECKFLAGS	+= -D__sparc__
 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
 KBUILD_AFLAGS += -m32
+CPPFLAGS_vmlinux.lds += -m32
 
 #LDFLAGS_vmlinux = -N -Ttext 0xf0004000
 #  Since 2.5.40, the first stage is left not btfix-ed.
-- 
cgit v1.2.3


From bb5d10ac8cc315d53306963001fe650d88a1cbb2 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Fri, 11 Jul 2008 17:34:58 -0700
Subject: ixgbe: remove device ID for unsupported device

The ixgbe driver was untested with device ID 8086:10c8 but still advertises
support.  Currently if this device is present in the system when the driver
is loaded, the system will panic.
Remove this device ID until full support can be tested with available
hardware.  This patch is necessary for 2.6.24, 2.6.25 and 2.6.26

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/ixgbe/ixgbe_main.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index be7b723c924..e5f3da8468c 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -70,8 +70,6 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82598 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT),
 	 board_82598 },
-	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT_DUAL_PORT),
-	 board_82598 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4),
 	 board_82598 },
 
-- 
cgit v1.2.3


From a6a5325239c20202e18e21e94291bccc659fbf9e Mon Sep 17 00:00:00 2001
From: Jie Yang <jie.yang@atheros.com>
Date: Fri, 18 Jul 2008 11:37:13 +0800
Subject: atl1e: Atheros L1E Gigabit Ethernet driver

Full patch for the Atheros L1E Gigabit Ethernet driver.
Supportring AR8121, AR8113 and AR8114

Signed-off-by: Jie Yang <jie.yang @atheros.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/Kconfig               |   11 +
 drivers/net/Makefile              |    1 +
 drivers/net/atl1e/Makefile        |    2 +
 drivers/net/atl1e/atl1e.h         |  503 +++++++
 drivers/net/atl1e/atl1e_ethtool.c |  405 ++++++
 drivers/net/atl1e/atl1e_hw.c      |  664 ++++++++++
 drivers/net/atl1e/atl1e_hw.h      |  793 +++++++++++
 drivers/net/atl1e/atl1e_main.c    | 2599 +++++++++++++++++++++++++++++++++++++
 drivers/net/atl1e/atl1e_param.c   |  263 ++++
 9 files changed, 5241 insertions(+)
 create mode 100644 drivers/net/atl1e/Makefile
 create mode 100644 drivers/net/atl1e/atl1e.h
 create mode 100644 drivers/net/atl1e/atl1e_ethtool.c
 create mode 100644 drivers/net/atl1e/atl1e_hw.c
 create mode 100644 drivers/net/atl1e/atl1e_hw.h
 create mode 100644 drivers/net/atl1e/atl1e_main.c
 create mode 100644 drivers/net/atl1e/atl1e_param.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3e5e64c33e1..32b89b0975a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2304,6 +2304,17 @@ config ATL1
 	  To compile this driver as a module, choose M here.  The module
 	  will be called atl1.
 
+config ATL1E
+	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	help
+	  This driver supports the Atheros L1E gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1e.
+
 endif # NETDEV_1000
 
 #
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4b17a9ab786..7629c901721 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_EHEA) += ehea/
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_ATL1) += atlx/
+obj-$(CONFIG_ATL1E) += atl1e/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_TEHUTI) += tehuti.o
 
diff --git a/drivers/net/atl1e/Makefile b/drivers/net/atl1e/Makefile
new file mode 100644
index 00000000000..bc11be824e7
--- /dev/null
+++ b/drivers/net/atl1e/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ATL1E)	+= atl1e.o
+atl1e-objs		+= atl1e_main.o atl1e_hw.o atl1e_ethtool.o atl1e_param.o
diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/atl1e/atl1e.h
new file mode 100644
index 00000000000..b645fa0f3f6
--- /dev/null
+++ b/drivers/net/atl1e/atl1e.h
@@ -0,0 +1,503 @@
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ * Copyright(c) 2007 xiong huang <xiong.huang@atheros.com>
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _ATL1E_H_
+#define _ATL1E_H_
+
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/udp.h>
+#include <linux/mii.h>
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/tcp.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/workqueue.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+
+#include "atl1e_hw.h"
+
+#define PCI_REG_COMMAND	 0x04    /* PCI Command Register */
+#define CMD_IO_SPACE	 0x0001
+#define CMD_MEMORY_SPACE 0x0002
+#define CMD_BUS_MASTER   0x0004
+
+#define BAR_0   0
+#define BAR_1   1
+#define BAR_5   5
+
+/* Wake Up Filter Control */
+#define AT_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define AT_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */
+#define AT_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
+#define AT_WUFC_MC   0x00000008 /* Multicast Wakeup Enable */
+#define AT_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
+
+#define SPEED_0		   0xffff
+#define HALF_DUPLEX        1
+#define FULL_DUPLEX        2
+
+/* Error Codes */
+#define AT_ERR_EEPROM      1
+#define AT_ERR_PHY         2
+#define AT_ERR_CONFIG      3
+#define AT_ERR_PARAM       4
+#define AT_ERR_MAC_TYPE    5
+#define AT_ERR_PHY_TYPE    6
+#define AT_ERR_PHY_SPEED   7
+#define AT_ERR_PHY_RES     8
+#define AT_ERR_TIMEOUT     9
+
+#define MAX_JUMBO_FRAME_SIZE 0x2000
+
+#define AT_VLAN_TAG_TO_TPD_TAG(_vlan, _tpd)    \
+	_tpd = (((_vlan) << (4)) | (((_vlan) >> 13) & 7) |\
+		 (((_vlan) >> 9) & 8))
+
+#define AT_TPD_TAG_TO_VLAN_TAG(_tpd, _vlan)    \
+	_vlan = (((_tpd) >> 8) | (((_tpd) & 0x77) << 9) |\
+		   (((_tdp) & 0x88) << 5))
+
+#define AT_MAX_RECEIVE_QUEUE    4
+#define AT_PAGE_NUM_PER_QUEUE   2
+
+#define AT_DMA_HI_ADDR_MASK     0xffffffff00000000ULL
+#define AT_DMA_LO_ADDR_MASK     0x00000000ffffffffULL
+
+#define AT_TX_WATCHDOG  (5 * HZ)
+#define AT_MAX_INT_WORK		10
+#define AT_TWSI_EEPROM_TIMEOUT 	100
+#define AT_HW_MAX_IDLE_DELAY 	10
+#define AT_SUSPEND_LINK_TIMEOUT 28
+
+#define AT_REGS_LEN	75
+#define AT_EEPROM_LEN 	512
+#define AT_ADV_MASK	(ADVERTISE_10_HALF  |\
+			 ADVERTISE_10_FULL  |\
+			 ADVERTISE_100_HALF |\
+			 ADVERTISE_100_FULL |\
+			 ADVERTISE_1000_FULL)
+
+/* tpd word 2 */
+#define TPD_BUFLEN_MASK 	0x3FFF
+#define TPD_BUFLEN_SHIFT        0
+#define TPD_DMAINT_MASK		0x0001
+#define TPD_DMAINT_SHIFT        14
+#define TPD_PKTNT_MASK          0x0001
+#define TPD_PKTINT_SHIFT        15
+#define TPD_VLANTAG_MASK        0xFFFF
+#define TPD_VLAN_SHIFT          16
+
+/* tpd word 3 bits 0:4 */
+#define TPD_EOP_MASK            0x0001
+#define TPD_EOP_SHIFT           0
+#define TPD_IP_VERSION_MASK	0x0001
+#define TPD_IP_VERSION_SHIFT	1	/* 0 : IPV4, 1 : IPV6 */
+#define TPD_INS_VL_TAG_MASK	0x0001
+#define TPD_INS_VL_TAG_SHIFT	2
+#define TPD_CC_SEGMENT_EN_MASK	0x0001
+#define TPD_CC_SEGMENT_EN_SHIFT	3
+#define TPD_SEGMENT_EN_MASK     0x0001
+#define TPD_SEGMENT_EN_SHIFT    4
+
+/* tdp word 3 bits 5:7 if ip version is 0 */
+#define TPD_IP_CSUM_MASK        0x0001
+#define TPD_IP_CSUM_SHIFT       5
+#define TPD_TCP_CSUM_MASK       0x0001
+#define TPD_TCP_CSUM_SHIFT      6
+#define TPD_UDP_CSUM_MASK       0x0001
+#define TPD_UDP_CSUM_SHIFT      7
+
+/* tdp word 3 bits 5:7 if ip version is 1 */
+#define TPD_V6_IPHLLO_MASK	0x0007
+#define TPD_V6_IPHLLO_SHIFT	7
+
+/* tpd word 3 bits 8:9 bit */
+#define TPD_VL_TAGGED_MASK      0x0001
+#define TPD_VL_TAGGED_SHIFT     8
+#define TPD_ETHTYPE_MASK        0x0001
+#define TPD_ETHTYPE_SHIFT       9
+
+/* tdp word 3 bits 10:13 if ip version is 0 */
+#define TDP_V4_IPHL_MASK	0x000F
+#define TPD_V4_IPHL_SHIFT	10
+
+/* tdp word 3 bits 10:13 if ip version is 1 */
+#define TPD_V6_IPHLHI_MASK	0x000F
+#define TPD_V6_IPHLHI_SHIFT	10
+
+/* tpd word 3 bit 14:31 if segment enabled */
+#define TPD_TCPHDRLEN_MASK      0x000F
+#define TPD_TCPHDRLEN_SHIFT     14
+#define TPD_HDRFLAG_MASK        0x0001
+#define TPD_HDRFLAG_SHIFT       18
+#define TPD_MSS_MASK            0x1FFF
+#define TPD_MSS_SHIFT           19
+
+/* tdp word 3 bit 16:31 if custom csum enabled */
+#define TPD_PLOADOFFSET_MASK    0x00FF
+#define TPD_PLOADOFFSET_SHIFT   16
+#define TPD_CCSUMOFFSET_MASK    0x00FF
+#define TPD_CCSUMOFFSET_SHIFT   24
+
+struct atl1e_tpd_desc {
+	__le64 buffer_addr;
+	__le32 word2;
+	__le32 word3;
+};
+
+/* how about 0x2000 */
+#define MAX_TX_BUF_LEN      0x2000
+#define MAX_TX_BUF_SHIFT    13
+/*#define MAX_TX_BUF_LEN  0x3000 */
+
+/* rrs word 1 bit 0:31 */
+#define RRS_RX_CSUM_MASK	0xFFFF
+#define RRS_RX_CSUM_SHIFT	0
+#define RRS_PKT_SIZE_MASK	0x3FFF
+#define RRS_PKT_SIZE_SHIFT	16
+#define RRS_CPU_NUM_MASK	0x0003
+#define	RRS_CPU_NUM_SHIFT	30
+
+#define	RRS_IS_RSS_IPV4		0x0001
+#define RRS_IS_RSS_IPV4_TCP	0x0002
+#define RRS_IS_RSS_IPV6		0x0004
+#define RRS_IS_RSS_IPV6_TCP	0x0008
+#define RRS_IS_IPV6		0x0010
+#define RRS_IS_IP_FRAG		0x0020
+#define RRS_IS_IP_DF		0x0040
+#define RRS_IS_802_3		0x0080
+#define RRS_IS_VLAN_TAG		0x0100
+#define RRS_IS_ERR_FRAME	0x0200
+#define RRS_IS_IPV4		0x0400
+#define RRS_IS_UDP		0x0800
+#define RRS_IS_TCP		0x1000
+#define RRS_IS_BCAST		0x2000
+#define RRS_IS_MCAST		0x4000
+#define RRS_IS_PAUSE		0x8000
+
+#define RRS_ERR_BAD_CRC		0x0001
+#define RRS_ERR_CODE		0x0002
+#define RRS_ERR_DRIBBLE		0x0004
+#define RRS_ERR_RUNT		0x0008
+#define RRS_ERR_RX_OVERFLOW	0x0010
+#define RRS_ERR_TRUNC		0x0020
+#define RRS_ERR_IP_CSUM		0x0040
+#define RRS_ERR_L4_CSUM		0x0080
+#define RRS_ERR_LENGTH		0x0100
+#define RRS_ERR_DES_ADDR	0x0200
+
+struct atl1e_recv_ret_status {
+	u16 seq_num;
+	u16 hash_lo;
+	__le32	word1;
+	u16 pkt_flag;
+	u16 err_flag;
+	u16 hash_hi;
+	u16 vtag;
+};
+
+enum atl1e_dma_req_block {
+	atl1e_dma_req_128 = 0,
+	atl1e_dma_req_256 = 1,
+	atl1e_dma_req_512 = 2,
+	atl1e_dma_req_1024 = 3,
+	atl1e_dma_req_2048 = 4,
+	atl1e_dma_req_4096 = 5
+};
+
+enum atl1e_rrs_type {
+	atl1e_rrs_disable = 0,
+	atl1e_rrs_ipv4 = 1,
+	atl1e_rrs_ipv4_tcp = 2,
+	atl1e_rrs_ipv6 = 4,
+	atl1e_rrs_ipv6_tcp = 8
+};
+
+enum atl1e_nic_type {
+	athr_l1e = 0,
+	athr_l2e_revA = 1,
+	athr_l2e_revB = 2
+};
+
+struct atl1e_hw_stats {
+	/* rx */
+	unsigned long rx_ok;	      /* The number of good packet received. */
+	unsigned long rx_bcast;       /* The number of good broadcast packet received. */
+	unsigned long rx_mcast;       /* The number of good multicast packet received. */
+	unsigned long rx_pause;       /* The number of Pause packet received. */
+	unsigned long rx_ctrl;        /* The number of Control packet received other than Pause frame. */
+	unsigned long rx_fcs_err;     /* The number of packets with bad FCS. */
+	unsigned long rx_len_err;     /* The number of packets with mismatch of length field and actual size. */
+	unsigned long rx_byte_cnt;    /* The number of bytes of good packet received. FCS is NOT included. */
+	unsigned long rx_runt;        /* The number of packets received that are less than 64 byte long and with good FCS. */
+	unsigned long rx_frag;        /* The number of packets received that are less than 64 byte long and with bad FCS. */
+	unsigned long rx_sz_64;       /* The number of good and bad packets received that are 64 byte long. */
+	unsigned long rx_sz_65_127;   /* The number of good and bad packets received that are between 65 and 127-byte long. */
+	unsigned long rx_sz_128_255;  /* The number of good and bad packets received that are between 128 and 255-byte long. */
+	unsigned long rx_sz_256_511;  /* The number of good and bad packets received that are between 256 and 511-byte long. */
+	unsigned long rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */
+	unsigned long rx_sz_1024_1518;    /* The number of good and bad packets received that are between 1024 and 1518-byte long. */
+	unsigned long rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */
+	unsigned long rx_sz_ov;       /* The number of good and bad packets received that are more than MTU size truncated by Selene. */
+	unsigned long rx_rxf_ov;      /* The number of frame dropped due to occurrence of RX FIFO overflow. */
+	unsigned long rx_rrd_ov;      /* The number of frame dropped due to occurrence of RRD overflow. */
+	unsigned long rx_align_err;   /* Alignment Error */
+	unsigned long rx_bcast_byte_cnt;  /* The byte count of broadcast packet received, excluding FCS. */
+	unsigned long rx_mcast_byte_cnt;  /* The byte count of multicast packet received, excluding FCS. */
+	unsigned long rx_err_addr;    /* The number of packets dropped due to address filtering. */
+
+	/* tx */
+	unsigned long tx_ok;      /* The number of good packet transmitted. */
+	unsigned long tx_bcast;       /* The number of good broadcast packet transmitted. */
+	unsigned long tx_mcast;       /* The number of good multicast packet transmitted. */
+	unsigned long tx_pause;       /* The number of Pause packet transmitted. */
+	unsigned long tx_exc_defer;   /* The number of packets transmitted with excessive deferral. */
+	unsigned long tx_ctrl;        /* The number of packets transmitted is a control frame, excluding Pause frame. */
+	unsigned long tx_defer;       /* The number of packets transmitted that is deferred. */
+	unsigned long tx_byte_cnt;    /* The number of bytes of data transmitted. FCS is NOT included. */
+	unsigned long tx_sz_64;       /* The number of good and bad packets transmitted that are 64 byte long. */
+	unsigned long tx_sz_65_127;   /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */
+	unsigned long tx_sz_128_255;  /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */
+	unsigned long tx_sz_256_511;  /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */
+	unsigned long tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */
+	unsigned long tx_sz_1024_1518;    /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */
+	unsigned long tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */
+	unsigned long tx_1_col;       /* The number of packets subsequently transmitted successfully with a single prior collision. */
+	unsigned long tx_2_col;       /* The number of packets subsequently transmitted successfully with multiple prior collisions. */
+	unsigned long tx_late_col;    /* The number of packets transmitted with late collisions. */
+	unsigned long tx_abort_col;   /* The number of transmit packets aborted due to excessive collisions. */
+	unsigned long tx_underrun;    /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+	unsigned long tx_rd_eop;      /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */
+	unsigned long tx_len_err;     /* The number of transmit packets with length field does NOT match the actual frame size. */
+	unsigned long tx_trunc;       /* The number of transmit packets truncated due to size exceeding MTU. */
+	unsigned long tx_bcast_byte;  /* The byte count of broadcast packet transmitted, excluding FCS. */
+	unsigned long tx_mcast_byte;  /* The byte count of multicast packet transmitted, excluding FCS. */
+};
+
+struct atl1e_hw {
+	u8 __iomem      *hw_addr;            /* inner register address */
+	resource_size_t mem_rang;
+	struct atl1e_adapter *adapter;
+	enum atl1e_nic_type  nic_type;
+	u16 device_id;
+	u16 vendor_id;
+	u16 subsystem_id;
+	u16 subsystem_vendor_id;
+	u8  revision_id;
+	u16 pci_cmd_word;
+	u8 mac_addr[ETH_ALEN];
+	u8 perm_mac_addr[ETH_ALEN];
+	u8 preamble_len;
+	u16 max_frame_size;
+	u16 rx_jumbo_th;
+	u16 tx_jumbo_th;
+
+	u16 media_type;
+#define MEDIA_TYPE_AUTO_SENSOR  0
+#define MEDIA_TYPE_100M_FULL    1
+#define MEDIA_TYPE_100M_HALF    2
+#define MEDIA_TYPE_10M_FULL     3
+#define MEDIA_TYPE_10M_HALF     4
+
+	u16 autoneg_advertised;
+#define ADVERTISE_10_HALF               0x0001
+#define ADVERTISE_10_FULL               0x0002
+#define ADVERTISE_100_HALF              0x0004
+#define ADVERTISE_100_FULL              0x0008
+#define ADVERTISE_1000_HALF             0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL             0x0020
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg;
+
+	u16 imt;        /* Interrupt Moderator timer ( 2us resolution) */
+	u16 ict;        /* Interrupt Clear timer (2us resolution) */
+	u32 smb_timer;
+	u16 rrd_thresh; /* Threshold of number of RRD produced to trigger
+			  interrupt request */
+	u16 tpd_thresh;
+	u16 rx_count_down; /* 2us resolution */
+	u16 tx_count_down;
+
+	u8 tpd_burst;   /* Number of TPD to prefetch in cache-aligned burst. */
+	enum atl1e_rrs_type rrs_type;
+	u32 base_cpu;
+	u32 indirect_tab;
+
+	enum atl1e_dma_req_block dmar_block;
+	enum atl1e_dma_req_block dmaw_block;
+	u8 dmaw_dly_cnt;
+	u8 dmar_dly_cnt;
+
+	bool phy_configured;
+	bool re_autoneg;
+	bool emi_ca;
+};
+
+/*
+ * wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct atl1e_tx_buffer {
+	struct sk_buff *skb;
+	u16 length;
+	dma_addr_t dma;
+};
+
+struct atl1e_rx_page {
+	dma_addr_t	dma;    /* receive rage DMA address */
+	u8		*addr;   /* receive rage virtual address */
+	dma_addr_t	write_offset_dma;  /* the DMA address which contain the
+					      receive data offset in the page */
+	u32		*write_offset_addr; /* the virtaul address which contain
+					     the receive data offset in the page */
+	u32		read_offset;       /* the offset where we have read */
+};
+
+struct atl1e_rx_page_desc {
+	struct atl1e_rx_page   rx_page[AT_PAGE_NUM_PER_QUEUE];
+	u8  rx_using;
+	u16 rx_nxseq;
+};
+
+/* transmit packet descriptor (tpd) ring */
+struct atl1e_tx_ring {
+	struct atl1e_tpd_desc *desc;  /* descriptor ring virtual address  */
+	dma_addr_t	   dma;    /* descriptor ring physical address */
+	u16       	   count;  /* the count of transmit rings  */
+	rwlock_t	   tx_lock;
+	u16		   next_to_use;
+	atomic_t	   next_to_clean;
+	struct atl1e_tx_buffer *tx_buffer;
+	dma_addr_t	   cmb_dma;
+	u32		   *cmb;
+};
+
+/* receive packet descriptor ring */
+struct atl1e_rx_ring {
+	void        	*desc;
+	dma_addr_t  	dma;
+	int         	size;
+	u32	    	page_size; /* bytes length of rxf page */
+	u32		real_page_size; /* real_page_size = page_size + jumbo + aliagn */
+	struct atl1e_rx_page_desc	rx_page_desc[AT_MAX_RECEIVE_QUEUE];
+};
+
+/* board specific private data structure */
+struct atl1e_adapter {
+	struct net_device   *netdev;
+	struct pci_dev      *pdev;
+	struct vlan_group   *vlgrp;
+	struct napi_struct  napi;
+	struct mii_if_info  mii;    /* MII interface info */
+	struct atl1e_hw        hw;
+	struct atl1e_hw_stats  hw_stats;
+	struct net_device_stats net_stats;
+
+	bool have_msi;
+	u32 wol;
+	u16 link_speed;
+	u16 link_duplex;
+
+	spinlock_t mdio_lock;
+	spinlock_t tx_lock;
+	atomic_t irq_sem;
+
+	struct work_struct reset_task;
+	struct work_struct link_chg_task;
+	struct timer_list watchdog_timer;
+	struct timer_list phy_config_timer;
+
+	/* All Descriptor memory */
+	dma_addr_t  	ring_dma;
+	void     	*ring_vir_addr;
+	int             ring_size;
+
+	struct atl1e_tx_ring tx_ring;
+	struct atl1e_rx_ring rx_ring;
+	int num_rx_queues;
+	unsigned long flags;
+#define __AT_TESTING        0x0001
+#define __AT_RESETTING      0x0002
+#define __AT_DOWN           0x0003
+
+	u32 bd_number;     /* board number;*/
+	u32 pci_state[16];
+	u32 *config_space;
+};
+
+#define AT_WRITE_REG(a, reg, value) ( \
+		writel((value), ((a)->hw_addr + reg)))
+
+#define AT_WRITE_FLUSH(a) (\
+		readl((a)->hw_addr))
+
+#define AT_READ_REG(a, reg) ( \
+		readl((a)->hw_addr + reg))
+
+#define AT_WRITE_REGB(a, reg, value) (\
+		writeb((value), ((a)->hw_addr + reg)))
+
+#define AT_READ_REGB(a, reg) (\
+		readb((a)->hw_addr + reg))
+
+#define AT_WRITE_REGW(a, reg, value) (\
+		writew((value), ((a)->hw_addr + reg)))
+
+#define AT_READ_REGW(a, reg) (\
+		readw((a)->hw_addr + reg))
+
+#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+		writel((value), (((a)->hw_addr + reg) + ((offset) << 2))))
+
+#define AT_READ_REG_ARRAY(a, reg, offset) ( \
+		readl(((a)->hw_addr + reg) + ((offset) << 2)))
+
+extern char atl1e_driver_name[];
+extern char atl1e_driver_version[];
+
+extern void atl1e_check_options(struct atl1e_adapter *adapter);
+extern int atl1e_up(struct atl1e_adapter *adapter);
+extern void atl1e_down(struct atl1e_adapter *adapter);
+extern void atl1e_reinit_locked(struct atl1e_adapter *adapter);
+extern s32 atl1e_reset_hw(struct atl1e_hw *hw);
+extern void atl1e_set_ethtool_ops(struct net_device *netdev);
+#endif /* _ATL1_E_H_ */
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
new file mode 100644
index 00000000000..cdc3b85b10b
--- /dev/null
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -0,0 +1,405 @@
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+
+#include "atl1e.h"
+
+static int atl1e_get_settings(struct net_device *netdev,
+			      struct ethtool_cmd *ecmd)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct atl1e_hw *hw = &adapter->hw;
+
+	ecmd->supported = (SUPPORTED_10baseT_Half  |
+			   SUPPORTED_10baseT_Full  |
+			   SUPPORTED_100baseT_Half |
+			   SUPPORTED_100baseT_Full |
+			   SUPPORTED_Autoneg       |
+			   SUPPORTED_TP);
+	if (hw->nic_type == athr_l1e)
+		ecmd->supported |= SUPPORTED_1000baseT_Full;
+
+	ecmd->advertising = ADVERTISED_TP;
+
+	ecmd->advertising |= ADVERTISED_Autoneg;
+	ecmd->advertising |= hw->autoneg_advertised;
+
+	ecmd->port = PORT_TP;
+	ecmd->phy_address = 0;
+	ecmd->transceiver = XCVR_INTERNAL;
+
+	if (adapter->link_speed != SPEED_0) {
+		ecmd->speed = adapter->link_speed;
+		if (adapter->link_duplex == FULL_DUPLEX)
+			ecmd->duplex = DUPLEX_FULL;
+		else
+			ecmd->duplex = DUPLEX_HALF;
+	} else {
+		ecmd->speed = -1;
+		ecmd->duplex = -1;
+	}
+
+	ecmd->autoneg = AUTONEG_ENABLE;
+	return 0;
+}
+
+static int atl1e_set_settings(struct net_device *netdev,
+			      struct ethtool_cmd *ecmd)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct atl1e_hw *hw = &adapter->hw;
+
+	while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+		msleep(1);
+
+	if (ecmd->autoneg == AUTONEG_ENABLE) {
+		u16 adv4, adv9;
+
+		if ((ecmd->advertising&ADVERTISE_1000_FULL)) {
+			if (hw->nic_type == athr_l1e) {
+				hw->autoneg_advertised =
+					ecmd->advertising & AT_ADV_MASK;
+			} else {
+				clear_bit(__AT_RESETTING, &adapter->flags);
+				return -EINVAL;
+			}
+		} else if (ecmd->advertising&ADVERTISE_1000_HALF) {
+			clear_bit(__AT_RESETTING, &adapter->flags);
+			return -EINVAL;
+		} else {
+			hw->autoneg_advertised =
+				ecmd->advertising & AT_ADV_MASK;
+		}
+		ecmd->advertising = hw->autoneg_advertised |
+				    ADVERTISED_TP | ADVERTISED_Autoneg;
+
+		adv4 = hw->mii_autoneg_adv_reg & ~MII_AR_SPEED_MASK;
+		adv9 = hw->mii_1000t_ctrl_reg & ~MII_AT001_CR_1000T_SPEED_MASK;
+		if (hw->autoneg_advertised & ADVERTISE_10_HALF)
+			adv4 |= MII_AR_10T_HD_CAPS;
+		if (hw->autoneg_advertised & ADVERTISE_10_FULL)
+			adv4 |= MII_AR_10T_FD_CAPS;
+		if (hw->autoneg_advertised & ADVERTISE_100_HALF)
+			adv4 |= MII_AR_100TX_HD_CAPS;
+		if (hw->autoneg_advertised & ADVERTISE_100_FULL)
+			adv4 |= MII_AR_100TX_FD_CAPS;
+		if (hw->autoneg_advertised & ADVERTISE_1000_FULL)
+			adv9 |= MII_AT001_CR_1000T_FD_CAPS;
+
+		if (adv4 != hw->mii_autoneg_adv_reg ||
+				adv9 != hw->mii_1000t_ctrl_reg) {
+			hw->mii_autoneg_adv_reg = adv4;
+			hw->mii_1000t_ctrl_reg = adv9;
+			hw->re_autoneg = true;
+		}
+
+	} else {
+		clear_bit(__AT_RESETTING, &adapter->flags);
+		return -EINVAL;
+	}
+
+	/* reset the link */
+
+	if (netif_running(adapter->netdev)) {
+		atl1e_down(adapter);
+		atl1e_up(adapter);
+	} else
+		atl1e_reset_hw(&adapter->hw);
+
+	clear_bit(__AT_RESETTING, &adapter->flags);
+	return 0;
+}
+
+static u32 atl1e_get_tx_csum(struct net_device *netdev)
+{
+	return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static u32 atl1e_get_msglevel(struct net_device *netdev)
+{
+#ifdef DBG
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+static void atl1e_set_msglevel(struct net_device *netdev, u32 data)
+{
+}
+
+static int atl1e_get_regs_len(struct net_device *netdev)
+{
+	return AT_REGS_LEN * sizeof(u32);
+}
+
+static void atl1e_get_regs(struct net_device *netdev,
+			   struct ethtool_regs *regs, void *p)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct atl1e_hw *hw = &adapter->hw;
+	u32 *regs_buff = p;
+	u16 phy_data;
+
+	memset(p, 0, AT_REGS_LEN * sizeof(u32));
+
+	regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+	regs_buff[0]  = AT_READ_REG(hw, REG_VPD_CAP);
+	regs_buff[1]  = AT_READ_REG(hw, REG_SPI_FLASH_CTRL);
+	regs_buff[2]  = AT_READ_REG(hw, REG_SPI_FLASH_CONFIG);
+	regs_buff[3]  = AT_READ_REG(hw, REG_TWSI_CTRL);
+	regs_buff[4]  = AT_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL);
+	regs_buff[5]  = AT_READ_REG(hw, REG_MASTER_CTRL);
+	regs_buff[6]  = AT_READ_REG(hw, REG_MANUAL_TIMER_INIT);
+	regs_buff[7]  = AT_READ_REG(hw, REG_IRQ_MODU_TIMER_INIT);
+	regs_buff[8]  = AT_READ_REG(hw, REG_GPHY_CTRL);
+	regs_buff[9]  = AT_READ_REG(hw, REG_CMBDISDMA_TIMER);
+	regs_buff[10] = AT_READ_REG(hw, REG_IDLE_STATUS);
+	regs_buff[11] = AT_READ_REG(hw, REG_MDIO_CTRL);
+	regs_buff[12] = AT_READ_REG(hw, REG_SERDES_LOCK);
+	regs_buff[13] = AT_READ_REG(hw, REG_MAC_CTRL);
+	regs_buff[14] = AT_READ_REG(hw, REG_MAC_IPG_IFG);
+	regs_buff[15] = AT_READ_REG(hw, REG_MAC_STA_ADDR);
+	regs_buff[16] = AT_READ_REG(hw, REG_MAC_STA_ADDR+4);
+	regs_buff[17] = AT_READ_REG(hw, REG_RX_HASH_TABLE);
+	regs_buff[18] = AT_READ_REG(hw, REG_RX_HASH_TABLE+4);
+	regs_buff[19] = AT_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL);
+	regs_buff[20] = AT_READ_REG(hw, REG_MTU);
+	regs_buff[21] = AT_READ_REG(hw, REG_WOL_CTRL);
+	regs_buff[22] = AT_READ_REG(hw, REG_SRAM_TRD_ADDR);
+	regs_buff[23] = AT_READ_REG(hw, REG_SRAM_TRD_LEN);
+	regs_buff[24] = AT_READ_REG(hw, REG_SRAM_RXF_ADDR);
+	regs_buff[25] = AT_READ_REG(hw, REG_SRAM_RXF_LEN);
+	regs_buff[26] = AT_READ_REG(hw, REG_SRAM_TXF_ADDR);
+	regs_buff[27] = AT_READ_REG(hw, REG_SRAM_TXF_LEN);
+	regs_buff[28] = AT_READ_REG(hw, REG_SRAM_TCPH_ADDR);
+	regs_buff[29] = AT_READ_REG(hw, REG_SRAM_PKTH_ADDR);
+
+	atl1e_read_phy_reg(hw, MII_BMCR, &phy_data);
+	regs_buff[73] = (u32)phy_data;
+	atl1e_read_phy_reg(hw, MII_BMSR, &phy_data);
+	regs_buff[74] = (u32)phy_data;
+}
+
+static int atl1e_get_eeprom_len(struct net_device *netdev)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+	if (!atl1e_check_eeprom_exist(&adapter->hw))
+		return AT_EEPROM_LEN;
+	else
+		return 0;
+}
+
+static int atl1e_get_eeprom(struct net_device *netdev,
+		struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct atl1e_hw *hw = &adapter->hw;
+	u32 *eeprom_buff;
+	int first_dword, last_dword;
+	int ret_val = 0;
+	int i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	if (atl1e_check_eeprom_exist(hw)) /* not exist */
+		return -EINVAL;
+
+	eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+	first_dword = eeprom->offset >> 2;
+	last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
+
+	eeprom_buff = kmalloc(sizeof(u32) *
+			(last_dword - first_dword + 1), GFP_KERNEL);
+	if (eeprom_buff == NULL)
+		return -ENOMEM;
+
+	for (i = first_dword; i < last_dword; i++) {
+		if (!atl1e_read_eeprom(hw, i * 4, &(eeprom_buff[i-first_dword]))) {
+			kfree(eeprom_buff);
+			return -EIO;
+		}
+	}
+
+	memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
+			eeprom->len);
+	kfree(eeprom_buff);
+
+	return ret_val;
+}
+
+static int atl1e_set_eeprom(struct net_device *netdev,
+			    struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct atl1e_hw *hw = &adapter->hw;
+	u32 *eeprom_buff;
+	u32 *ptr;
+	int first_dword, last_dword;
+	int ret_val = 0;
+	int i;
+
+	if (eeprom->len == 0)
+		return -EOPNOTSUPP;
+
+	if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+		return -EINVAL;
+
+	first_dword = eeprom->offset >> 2;
+	last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
+	eeprom_buff = kmalloc(AT_EEPROM_LEN, GFP_KERNEL);
+	if (eeprom_buff == NULL)
+		return -ENOMEM;
+
+	ptr = (u32 *)eeprom_buff;
+
+	if (eeprom->offset & 3) {
+		/* need read/modify/write of first changed EEPROM word */
+		/* only the second byte of the word is being modified */
+		if (!atl1e_read_eeprom(hw, first_dword * 4, &(eeprom_buff[0]))) {
+			ret_val = -EIO;
+			goto out;
+		}
+		ptr++;
+	}
+	if (((eeprom->offset + eeprom->len) & 3)) {
+		/* need read/modify/write of last changed EEPROM word */
+		/* only the first byte of the word is being modified */
+
+		if (!atl1e_read_eeprom(hw, last_dword * 4,
+				&(eeprom_buff[last_dword - first_dword]))) {
+			ret_val = -EIO;
+			goto out;
+		}
+	}
+
+	/* Device's eeprom is always little-endian, word addressable */
+	memcpy(ptr, bytes, eeprom->len);
+
+	for (i = 0; i < last_dword - first_dword + 1; i++) {
+		if (!atl1e_write_eeprom(hw, ((first_dword + i) * 4),
+				  eeprom_buff[i])) {
+			ret_val = -EIO;
+			goto out;
+		}
+	}
+out:
+	kfree(eeprom_buff);
+	return ret_val;
+}
+
+static void atl1e_get_drvinfo(struct net_device *netdev,
+		struct ethtool_drvinfo *drvinfo)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+	strncpy(drvinfo->driver,  atl1e_driver_name, 32);
+	strncpy(drvinfo->version, atl1e_driver_version, 32);
+	strncpy(drvinfo->fw_version, "L1e", 32);
+	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+	drvinfo->n_stats = 0;
+	drvinfo->testinfo_len = 0;
+	drvinfo->regdump_len = atl1e_get_regs_len(netdev);
+	drvinfo->eedump_len = atl1e_get_eeprom_len(netdev);
+}
+
+static void atl1e_get_wol(struct net_device *netdev,
+			  struct ethtool_wolinfo *wol)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+	wol->supported = WAKE_MAGIC | WAKE_PHY;
+	wol->wolopts = 0;
+
+	if (adapter->wol & AT_WUFC_EX)
+		wol->wolopts |= WAKE_UCAST;
+	if (adapter->wol & AT_WUFC_MC)
+		wol->wolopts |= WAKE_MCAST;
+	if (adapter->wol & AT_WUFC_BC)
+		wol->wolopts |= WAKE_BCAST;
+	if (adapter->wol & AT_WUFC_MAG)
+		wol->wolopts |= WAKE_MAGIC;
+	if (adapter->wol & AT_WUFC_LNKC)
+		wol->wolopts |= WAKE_PHY;
+
+	return;
+}
+
+static int atl1e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
+			    WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+		return -EOPNOTSUPP;
+	/* these settings will always override what we currently have */
+	adapter->wol = 0;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		adapter->wol |= AT_WUFC_MAG;
+	if (wol->wolopts & WAKE_PHY)
+		adapter->wol |= AT_WUFC_LNKC;
+
+	return 0;
+}
+
+static int atl1e_nway_reset(struct net_device *netdev)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	if (netif_running(netdev))
+		atl1e_reinit_locked(adapter);
+	return 0;
+}
+
+static struct ethtool_ops atl1e_ethtool_ops = {
+	.get_settings           = atl1e_get_settings,
+	.set_settings           = atl1e_set_settings,
+	.get_drvinfo            = atl1e_get_drvinfo,
+	.get_regs_len           = atl1e_get_regs_len,
+	.get_regs               = atl1e_get_regs,
+	.get_wol                = atl1e_get_wol,
+	.set_wol                = atl1e_set_wol,
+	.get_msglevel           = atl1e_get_msglevel,
+	.set_msglevel           = atl1e_set_msglevel,
+	.nway_reset             = atl1e_nway_reset,
+	.get_link               = ethtool_op_get_link,
+	.get_eeprom_len         = atl1e_get_eeprom_len,
+	.get_eeprom             = atl1e_get_eeprom,
+	.set_eeprom             = atl1e_set_eeprom,
+	.get_tx_csum            = atl1e_get_tx_csum,
+	.get_sg                 = ethtool_op_get_sg,
+	.set_sg                 = ethtool_op_set_sg,
+#ifdef NETIF_F_TSO
+	.get_tso                = ethtool_op_get_tso,
+#endif
+};
+
+void atl1e_set_ethtool_ops(struct net_device *netdev)
+{
+	SET_ETHTOOL_OPS(netdev, &atl1e_ethtool_ops);
+}
diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c
new file mode 100644
index 00000000000..949e75358bf
--- /dev/null
+++ b/drivers/net/atl1e/atl1e_hw.c
@@ -0,0 +1,664 @@
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+
+#include "atl1e.h"
+
+/*
+ * check_eeprom_exist
+ * return 0 if eeprom exist
+ */
+int atl1e_check_eeprom_exist(struct atl1e_hw *hw)
+{
+	u32 value;
+
+	value = AT_READ_REG(hw, REG_SPI_FLASH_CTRL);
+	if (value & SPI_FLASH_CTRL_EN_VPD) {
+		value &= ~SPI_FLASH_CTRL_EN_VPD;
+		AT_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
+	}
+	value = AT_READ_REGW(hw, REG_PCIE_CAP_LIST);
+	return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
+}
+
+void atl1e_hw_set_mac_addr(struct atl1e_hw *hw)
+{
+	u32 value;
+	/*
+	 * 00-0B-6A-F6-00-DC
+	 * 0:  6AF600DC 1: 000B
+	 * low dword
+	 */
+	value = (((u32)hw->mac_addr[2]) << 24) |
+		(((u32)hw->mac_addr[3]) << 16) |
+		(((u32)hw->mac_addr[4]) << 8)  |
+		(((u32)hw->mac_addr[5])) ;
+	AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
+	/* hight dword */
+	value = (((u32)hw->mac_addr[0]) << 8) |
+		(((u32)hw->mac_addr[1])) ;
+	AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
+}
+
+/*
+ * atl1e_get_permanent_address
+ * return 0 if get valid mac address,
+ */
+static int atl1e_get_permanent_address(struct atl1e_hw *hw)
+{
+	u32 addr[2];
+	u32 i;
+	u32 twsi_ctrl_data;
+	u8  eth_addr[ETH_ALEN];
+
+	if (is_valid_ether_addr(hw->perm_mac_addr))
+		return 0;
+
+	/* init */
+	addr[0] = addr[1] = 0;
+
+	if (!atl1e_check_eeprom_exist(hw)) {
+		/* eeprom exist */
+		twsi_ctrl_data = AT_READ_REG(hw, REG_TWSI_CTRL);
+		twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART;
+		AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data);
+		for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) {
+			msleep(10);
+			twsi_ctrl_data = AT_READ_REG(hw, REG_TWSI_CTRL);
+			if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0)
+				break;
+		}
+		if (i >= AT_TWSI_EEPROM_TIMEOUT)
+			return AT_ERR_TIMEOUT;
+	}
+
+	/* maybe MAC-address is from BIOS */
+	addr[0] = AT_READ_REG(hw, REG_MAC_STA_ADDR);
+	addr[1] = AT_READ_REG(hw, REG_MAC_STA_ADDR + 4);
+	*(u32 *) &eth_addr[2] = swab32(addr[0]);
+	*(u16 *) &eth_addr[0] = swab16(*(u16 *)&addr[1]);
+
+	if (is_valid_ether_addr(eth_addr)) {
+		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+		return 0;
+	}
+
+	return AT_ERR_EEPROM;
+}
+
+bool atl1e_write_eeprom(struct atl1e_hw *hw, u32 offset, u32 value)
+{
+	return true;
+}
+
+bool atl1e_read_eeprom(struct atl1e_hw *hw, u32 offset, u32 *p_value)
+{
+	int i;
+	u32 control;
+
+	if (offset & 3)
+		return false; /* address do not align */
+
+	AT_WRITE_REG(hw, REG_VPD_DATA, 0);
+	control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
+	AT_WRITE_REG(hw, REG_VPD_CAP, control);
+
+	for (i = 0; i < 10; i++) {
+		msleep(2);
+		control = AT_READ_REG(hw, REG_VPD_CAP);
+		if (control & VPD_CAP_VPD_FLAG)
+			break;
+	}
+	if (control & VPD_CAP_VPD_FLAG) {
+		*p_value = AT_READ_REG(hw, REG_VPD_DATA);
+		return true;
+	}
+	return false; /* timeout */
+}
+
+void atl1e_force_ps(struct atl1e_hw *hw)
+{
+	AT_WRITE_REGW(hw, REG_GPHY_CTRL,
+			GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET);
+}
+
+/*
+ * Reads the adapter's MAC address from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+int atl1e_read_mac_addr(struct atl1e_hw *hw)
+{
+	int err = 0;
+
+	err = atl1e_get_permanent_address(hw);
+	if (err)
+		return AT_ERR_EEPROM;
+	memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr));
+	return 0;
+}
+
+/*
+ * atl1e_hash_mc_addr
+ *  purpose
+ *      set hash value for a multicast address
+ *      hash calcu processing :
+ *          1. calcu 32bit CRC for multicast address
+ *          2. reverse crc with MSB to LSB
+ */
+u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
+{
+	u32 crc32;
+	u32 value = 0;
+	int i;
+
+	crc32 = ether_crc_le(6, mc_addr);
+	crc32 = ~crc32;
+	for (i = 0; i < 32; i++)
+		value |= (((crc32 >> i) & 1) << (31 - i));
+
+	return value;
+}
+
+/*
+ * Sets the bit in the multicast table corresponding to the hash value.
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ */
+void atl1e_hash_set(struct atl1e_hw *hw, u32 hash_value)
+{
+	u32 hash_bit, hash_reg;
+	u32 mta;
+
+	/*
+	 * The HASH Table  is a register array of 2 32-bit registers.
+	 * It is treated like an array of 64 bits.  We want to set
+	 * bit BitArray[hash_value]. So we figure out what register
+	 * the bit is in, read it, OR in the new bit, then write
+	 * back the new value.  The register is determined by the
+	 * upper 7 bits of the hash value and the bit within that
+	 * register are determined by the lower 5 bits of the value.
+	 */
+	hash_reg = (hash_value >> 31) & 0x1;
+	hash_bit = (hash_value >> 26) & 0x1F;
+
+	mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);
+
+	mta |= (1 << hash_bit);
+
+	AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
+}
+/*
+ * Reads the value from a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to read
+ */
+int atl1e_read_phy_reg(struct atl1e_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+	u32 val;
+	int i;
+
+	val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
+		MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW |
+		MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+
+	AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+
+	wmb();
+
+	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+		udelay(2);
+		val = AT_READ_REG(hw, REG_MDIO_CTRL);
+		if (!(val & (MDIO_START | MDIO_BUSY)))
+			break;
+		wmb();
+	}
+	if (!(val & (MDIO_START | MDIO_BUSY))) {
+		*phy_data = (u16)val;
+		return 0;
+	}
+
+	return AT_ERR_PHY;
+}
+
+/*
+ * Writes a value to a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to write
+ * data - data to write to the PHY
+ */
+int atl1e_write_phy_reg(struct atl1e_hw *hw, u32 reg_addr, u16 phy_data)
+{
+	int i;
+	u32 val;
+
+	val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
+	       (reg_addr&MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
+	       MDIO_SUP_PREAMBLE |
+	       MDIO_START |
+	       MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+
+	AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+	wmb();
+
+	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+		udelay(2);
+		val = AT_READ_REG(hw, REG_MDIO_CTRL);
+		if (!(val & (MDIO_START | MDIO_BUSY)))
+			break;
+		wmb();
+	}
+
+	if (!(val & (MDIO_START | MDIO_BUSY)))
+		return 0;
+
+	return AT_ERR_PHY;
+}
+
+/*
+ * atl1e_init_pcie - init PCIE module
+ */
+static void atl1e_init_pcie(struct atl1e_hw *hw)
+{
+	u32 value;
+	/* comment 2lines below to save more power when sususpend
+	   value = LTSSM_TEST_MODE_DEF;
+	   AT_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value);
+	 */
+
+	/* pcie flow control mode change */
+	value = AT_READ_REG(hw, 0x1008);
+	value |= 0x8000;
+	AT_WRITE_REG(hw, 0x1008, value);
+}
+/*
+ * Configures PHY autoneg and flow control advertisement settings
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw)
+{
+	s32 ret_val;
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg;
+
+	if (0 != hw->mii_autoneg_adv_reg)
+		return 0;
+	/* Read the MII Auto-Neg Advertisement Register (Address 4/9). */
+	mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
+	mii_1000t_ctrl_reg  = MII_AT001_CR_1000T_DEFAULT_CAP_MASK;
+
+	/*
+	 * Need to parse autoneg_advertised  and set up
+	 * the appropriate PHY registers.  First we will parse for
+	 * autoneg_advertised software override.  Since we can advertise
+	 * a plethora of combinations, we need to check each bit
+	 * individually.
+	 */
+
+	/*
+	 * First we clear all the 10/100 mb speed bits in the Auto-Neg
+	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
+	 * the  1000Base-T control Register (Address 9).
+	 */
+	mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
+	mii_1000t_ctrl_reg  &= ~MII_AT001_CR_1000T_SPEED_MASK;
+
+	/*
+	 * Need to parse MediaType and setup the
+	 * appropriate PHY registers.
+	 */
+	switch (hw->media_type) {
+	case MEDIA_TYPE_AUTO_SENSOR:
+		mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS   |
+					MII_AR_10T_FD_CAPS   |
+					MII_AR_100TX_HD_CAPS |
+					MII_AR_100TX_FD_CAPS);
+		hw->autoneg_advertised = ADVERTISE_10_HALF  |
+					 ADVERTISE_10_FULL  |
+					 ADVERTISE_100_HALF |
+					 ADVERTISE_100_FULL;
+		if (hw->nic_type == athr_l1e) {
+			mii_1000t_ctrl_reg |=
+				MII_AT001_CR_1000T_FD_CAPS;
+			hw->autoneg_advertised |= ADVERTISE_1000_FULL;
+		}
+		break;
+
+	case MEDIA_TYPE_100M_FULL:
+		mii_autoneg_adv_reg   |= MII_AR_100TX_FD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_100_FULL;
+		break;
+
+	case MEDIA_TYPE_100M_HALF:
+		mii_autoneg_adv_reg   |= MII_AR_100TX_HD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_100_HALF;
+		break;
+
+	case MEDIA_TYPE_10M_FULL:
+		mii_autoneg_adv_reg   |= MII_AR_10T_FD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_10_FULL;
+		break;
+
+	default:
+		mii_autoneg_adv_reg   |= MII_AR_10T_HD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_10_HALF;
+		break;
+	}
+
+	/* flow control fixed to enable all */
+	mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
+
+	hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
+	hw->mii_1000t_ctrl_reg  = mii_1000t_ctrl_reg;
+
+	ret_val = atl1e_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
+
+	if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) {
+		ret_val = atl1e_write_phy_reg(hw, MII_AT001_CR,
+					   mii_1000t_ctrl_reg);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Resets the PHY and make all config validate
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets bit 15 and 12 of the MII control regiser (for F001 bug)
+ */
+int atl1e_phy_commit(struct atl1e_hw *hw)
+{
+	struct atl1e_adapter *adapter = (struct atl1e_adapter *)hw->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+	int ret_val;
+	u16 phy_data;
+
+	phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG;
+
+	ret_val = atl1e_write_phy_reg(hw, MII_BMCR, phy_data);
+	if (ret_val) {
+		u32 val;
+		int i;
+		/**************************************
+		 * pcie serdes link may be down !
+		 **************************************/
+		for (i = 0; i < 25; i++) {
+			msleep(1);
+			val = AT_READ_REG(hw, REG_MDIO_CTRL);
+			if (!(val & (MDIO_START | MDIO_BUSY)))
+				break;
+		}
+
+		if (0 != (val & (MDIO_START | MDIO_BUSY))) {
+			dev_err(&pdev->dev,
+				"pcie linkdown at least for 25ms\n");
+			return ret_val;
+		}
+
+		dev_err(&pdev->dev, "pcie linkup after %d ms\n", i);
+	}
+	return 0;
+}
+
+int atl1e_phy_init(struct atl1e_hw *hw)
+{
+	struct atl1e_adapter *adapter = (struct atl1e_adapter *)hw->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+	s32 ret_val;
+	u16 phy_val;
+
+	if (hw->phy_configured) {
+		if (hw->re_autoneg) {
+			hw->re_autoneg = false;
+			return atl1e_restart_autoneg(hw);
+		}
+		return 0;
+	}
+
+	/* RESET GPHY Core */
+	AT_WRITE_REGW(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT);
+	msleep(2);
+	AT_WRITE_REGW(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT |
+		      GPHY_CTRL_EXT_RESET);
+	msleep(2);
+
+	/* patches */
+	/* p1. eable hibernation mode */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0xB);
+	if (ret_val)
+		return ret_val;
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0xBC00);
+	if (ret_val)
+		return ret_val;
+	/* p2. set Class A/B for all modes */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0);
+	if (ret_val)
+		return ret_val;
+	phy_val = 0x02ef;
+	/* remove Class AB */
+	/* phy_val = hw->emi_ca ? 0x02ef : 0x02df; */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, phy_val);
+	if (ret_val)
+		return ret_val;
+	/* p3. 10B ??? */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x12);
+	if (ret_val)
+		return ret_val;
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x4C04);
+	if (ret_val)
+		return ret_val;
+	/* p4. 1000T power */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x4);
+	if (ret_val)
+		return ret_val;
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x8BBB);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x5);
+	if (ret_val)
+		return ret_val;
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x2C46);
+	if (ret_val)
+		return ret_val;
+
+	msleep(1);
+
+	/*Enable PHY LinkChange Interrupt */
+	ret_val = atl1e_write_phy_reg(hw, MII_INT_CTRL, 0xC00);
+	if (ret_val) {
+		dev_err(&pdev->dev, "Error enable PHY linkChange Interrupt\n");
+		return ret_val;
+	}
+	/* setup AutoNeg parameters */
+	ret_val = atl1e_phy_setup_autoneg_adv(hw);
+	if (ret_val) {
+		dev_err(&pdev->dev, "Error Setting up Auto-Negotiation\n");
+		return ret_val;
+	}
+	/* SW.Reset & En-Auto-Neg to restart Auto-Neg*/
+	dev_dbg(&pdev->dev, "Restarting Auto-Neg");
+	ret_val = atl1e_phy_commit(hw);
+	if (ret_val) {
+		dev_err(&pdev->dev, "Error Resetting the phy");
+		return ret_val;
+	}
+
+	hw->phy_configured = true;
+
+	return 0;
+}
+
+/*
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ * hw - Struct containing variables accessed by shared code
+ * return : 0  or  idle status (if error)
+ */
+int atl1e_reset_hw(struct atl1e_hw *hw)
+{
+	struct atl1e_adapter *adapter = (struct atl1e_adapter *)hw->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+
+	u32 idle_status_data = 0;
+	u16 pci_cfg_cmd_word = 0;
+	int timeout = 0;
+
+	/* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */
+	pci_read_config_word(pdev, PCI_REG_COMMAND, &pci_cfg_cmd_word);
+	if ((pci_cfg_cmd_word & (CMD_IO_SPACE |
+				CMD_MEMORY_SPACE | CMD_BUS_MASTER))
+			!= (CMD_IO_SPACE | CMD_MEMORY_SPACE | CMD_BUS_MASTER)) {
+		pci_cfg_cmd_word |= (CMD_IO_SPACE |
+				     CMD_MEMORY_SPACE | CMD_BUS_MASTER);
+		pci_write_config_word(pdev, PCI_REG_COMMAND, pci_cfg_cmd_word);
+	}
+
+	/*
+	 * Issue Soft Reset to the MAC.  This will reset the chip's
+	 * transmit, receive, DMA.  It will not effect
+	 * the current PCI configuration.  The global reset bit is self-
+	 * clearing, and should clear within a microsecond.
+	 */
+	AT_WRITE_REG(hw, REG_MASTER_CTRL,
+			MASTER_CTRL_LED_MODE | MASTER_CTRL_SOFT_RST);
+	wmb();
+	msleep(1);
+
+	/* Wait at least 10ms for All module to be Idle */
+	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+		idle_status_data = AT_READ_REG(hw, REG_IDLE_STATUS);
+		if (idle_status_data == 0)
+			break;
+		msleep(1);
+		cpu_relax();
+	}
+
+	if (timeout >= AT_HW_MAX_IDLE_DELAY) {
+		dev_err(&pdev->dev,
+			"MAC state machine cann't be idle since"
+			" disabled for 10ms second\n");
+		return AT_ERR_TIMEOUT;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Performs basic configuration of the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes multicast table,
+ * and  Calls routines to setup link
+ * Leaves the transmit and receive units disabled and uninitialized.
+ */
+int atl1e_init_hw(struct atl1e_hw *hw)
+{
+	s32 ret_val = 0;
+
+	atl1e_init_pcie(hw);
+
+	/* Zero out the Multicast HASH table */
+	/* clear the old settings from the multicast hash table */
+	AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
+	AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
+
+	ret_val = atl1e_phy_init(hw);
+
+	return ret_val;
+}
+
+/*
+ * Detects the current speed and duplex settings of the hardware.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ */
+int atl1e_get_speed_and_duplex(struct atl1e_hw *hw, u16 *speed, u16 *duplex)
+{
+	int err;
+	u16 phy_data;
+
+	/* Read   PHY Specific Status Register (17) */
+	err = atl1e_read_phy_reg(hw, MII_AT001_PSSR, &phy_data);
+	if (err)
+		return err;
+
+	if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED))
+		return AT_ERR_PHY_RES;
+
+	switch (phy_data & MII_AT001_PSSR_SPEED) {
+	case MII_AT001_PSSR_1000MBS:
+		*speed = SPEED_1000;
+		break;
+	case MII_AT001_PSSR_100MBS:
+		*speed = SPEED_100;
+		break;
+	case MII_AT001_PSSR_10MBS:
+		*speed = SPEED_10;
+		break;
+	default:
+		return AT_ERR_PHY_SPEED;
+		break;
+	}
+
+	if (phy_data & MII_AT001_PSSR_DPLX)
+		*duplex = FULL_DUPLEX;
+	else
+		*duplex = HALF_DUPLEX;
+
+	return 0;
+}
+
+int atl1e_restart_autoneg(struct atl1e_hw *hw)
+{
+	int err = 0;
+
+	err = atl1e_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
+	if (err)
+		return err;
+
+	if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) {
+		err = atl1e_write_phy_reg(hw, MII_AT001_CR,
+				       hw->mii_1000t_ctrl_reg);
+		if (err)
+			return err;
+	}
+
+	err = atl1e_write_phy_reg(hw, MII_BMCR,
+			MII_CR_RESET | MII_CR_AUTO_NEG_EN |
+			MII_CR_RESTART_AUTO_NEG);
+	return err;
+}
+
diff --git a/drivers/net/atl1e/atl1e_hw.h b/drivers/net/atl1e/atl1e_hw.h
new file mode 100644
index 00000000000..5ea2f4d86cf
--- /dev/null
+++ b/drivers/net/atl1e/atl1e_hw.h
@@ -0,0 +1,793 @@
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _ATHL1E_HW_H_
+#define _ATHL1E_HW_H_
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+struct atl1e_adapter;
+struct atl1e_hw;
+
+/* function prototype */
+s32 atl1e_reset_hw(struct atl1e_hw *hw);
+s32 atl1e_read_mac_addr(struct atl1e_hw *hw);
+s32 atl1e_init_hw(struct atl1e_hw *hw);
+s32 atl1e_phy_commit(struct atl1e_hw *hw);
+s32 atl1e_get_speed_and_duplex(struct atl1e_hw *hw, u16 *speed, u16 *duplex);
+u32 atl1e_auto_get_fc(struct atl1e_adapter *adapter, u16 duplex);
+u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr);
+void atl1e_hash_set(struct atl1e_hw *hw, u32 hash_value);
+s32 atl1e_read_phy_reg(struct atl1e_hw *hw, u16 reg_addr, u16 *phy_data);
+s32 atl1e_write_phy_reg(struct atl1e_hw *hw, u32 reg_addr, u16 phy_data);
+s32 atl1e_validate_mdi_setting(struct atl1e_hw *hw);
+void atl1e_hw_set_mac_addr(struct atl1e_hw *hw);
+bool atl1e_read_eeprom(struct atl1e_hw *hw, u32 offset, u32 *p_value);
+bool atl1e_write_eeprom(struct atl1e_hw *hw, u32 offset, u32 value);
+s32 atl1e_phy_enter_power_saving(struct atl1e_hw *hw);
+s32 atl1e_phy_leave_power_saving(struct atl1e_hw *hw);
+s32 atl1e_phy_init(struct atl1e_hw *hw);
+int atl1e_check_eeprom_exist(struct atl1e_hw *hw);
+void atl1e_force_ps(struct atl1e_hw *hw);
+s32 atl1e_restart_autoneg(struct atl1e_hw *hw);
+
+/* register definition */
+#define REG_PM_CTRLSTAT             0x44
+
+#define REG_PCIE_CAP_LIST           0x58
+
+#define REG_DEVICE_CAP              0x5C
+#define     DEVICE_CAP_MAX_PAYLOAD_MASK     0x7
+#define     DEVICE_CAP_MAX_PAYLOAD_SHIFT    0
+
+#define REG_DEVICE_CTRL             0x60
+#define     DEVICE_CTRL_MAX_PAYLOAD_MASK    0x7
+#define     DEVICE_CTRL_MAX_PAYLOAD_SHIFT   5
+#define     DEVICE_CTRL_MAX_RREQ_SZ_MASK    0x7
+#define     DEVICE_CTRL_MAX_RREQ_SZ_SHIFT   12
+
+#define REG_VPD_CAP                 0x6C
+#define     VPD_CAP_ID_MASK                 0xff
+#define     VPD_CAP_ID_SHIFT                0
+#define     VPD_CAP_NEXT_PTR_MASK           0xFF
+#define     VPD_CAP_NEXT_PTR_SHIFT          8
+#define     VPD_CAP_VPD_ADDR_MASK           0x7FFF
+#define     VPD_CAP_VPD_ADDR_SHIFT          16
+#define     VPD_CAP_VPD_FLAG                0x80000000
+
+#define REG_VPD_DATA                0x70
+
+#define REG_SPI_FLASH_CTRL          0x200
+#define     SPI_FLASH_CTRL_STS_NON_RDY      0x1
+#define     SPI_FLASH_CTRL_STS_WEN          0x2
+#define     SPI_FLASH_CTRL_STS_WPEN         0x80
+#define     SPI_FLASH_CTRL_DEV_STS_MASK     0xFF
+#define     SPI_FLASH_CTRL_DEV_STS_SHIFT    0
+#define     SPI_FLASH_CTRL_INS_MASK         0x7
+#define     SPI_FLASH_CTRL_INS_SHIFT        8
+#define     SPI_FLASH_CTRL_START            0x800
+#define     SPI_FLASH_CTRL_EN_VPD           0x2000
+#define     SPI_FLASH_CTRL_LDSTART          0x8000
+#define     SPI_FLASH_CTRL_CS_HI_MASK       0x3
+#define     SPI_FLASH_CTRL_CS_HI_SHIFT      16
+#define     SPI_FLASH_CTRL_CS_HOLD_MASK     0x3
+#define     SPI_FLASH_CTRL_CS_HOLD_SHIFT    18
+#define     SPI_FLASH_CTRL_CLK_LO_MASK      0x3
+#define     SPI_FLASH_CTRL_CLK_LO_SHIFT     20
+#define     SPI_FLASH_CTRL_CLK_HI_MASK      0x3
+#define     SPI_FLASH_CTRL_CLK_HI_SHIFT     22
+#define     SPI_FLASH_CTRL_CS_SETUP_MASK    0x3
+#define     SPI_FLASH_CTRL_CS_SETUP_SHIFT   24
+#define     SPI_FLASH_CTRL_EROM_PGSZ_MASK   0x3
+#define     SPI_FLASH_CTRL_EROM_PGSZ_SHIFT  26
+#define     SPI_FLASH_CTRL_WAIT_READY       0x10000000
+
+#define REG_SPI_ADDR                0x204
+
+#define REG_SPI_DATA                0x208
+
+#define REG_SPI_FLASH_CONFIG        0x20C
+#define     SPI_FLASH_CONFIG_LD_ADDR_MASK   0xFFFFFF
+#define     SPI_FLASH_CONFIG_LD_ADDR_SHIFT  0
+#define     SPI_FLASH_CONFIG_VPD_ADDR_MASK  0x3
+#define     SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
+#define     SPI_FLASH_CONFIG_LD_EXIST       0x4000000
+
+
+#define REG_SPI_FLASH_OP_PROGRAM    0x210
+#define REG_SPI_FLASH_OP_SC_ERASE   0x211
+#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
+#define REG_SPI_FLASH_OP_RDID       0x213
+#define REG_SPI_FLASH_OP_WREN       0x214
+#define REG_SPI_FLASH_OP_RDSR       0x215
+#define REG_SPI_FLASH_OP_WRSR       0x216
+#define REG_SPI_FLASH_OP_READ       0x217
+
+#define REG_TWSI_CTRL               0x218
+#define     TWSI_CTRL_LD_OFFSET_MASK        0xFF
+#define     TWSI_CTRL_LD_OFFSET_SHIFT       0
+#define     TWSI_CTRL_LD_SLV_ADDR_MASK      0x7
+#define     TWSI_CTRL_LD_SLV_ADDR_SHIFT     8
+#define     TWSI_CTRL_SW_LDSTART            0x800
+#define     TWSI_CTRL_HW_LDSTART            0x1000
+#define     TWSI_CTRL_SMB_SLV_ADDR_MASK     0x0x7F
+#define     TWSI_CTRL_SMB_SLV_ADDR_SHIFT    15
+#define     TWSI_CTRL_LD_EXIST              0x400000
+#define     TWSI_CTRL_READ_FREQ_SEL_MASK    0x3
+#define     TWSI_CTRL_READ_FREQ_SEL_SHIFT   23
+#define     TWSI_CTRL_FREQ_SEL_100K         0
+#define     TWSI_CTRL_FREQ_SEL_200K         1
+#define     TWSI_CTRL_FREQ_SEL_300K         2
+#define     TWSI_CTRL_FREQ_SEL_400K         3
+#define     TWSI_CTRL_SMB_SLV_ADDR
+#define     TWSI_CTRL_WRITE_FREQ_SEL_MASK   0x3
+#define     TWSI_CTRL_WRITE_FREQ_SEL_SHIFT  24
+
+
+#define REG_PCIE_DEV_MISC_CTRL      0x21C
+#define     PCIE_DEV_MISC_CTRL_EXT_PIPE     0x2
+#define     PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
+#define     PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
+#define     PCIE_DEV_MISC_CTRL_SERDES_ENDIAN    0x8
+#define     PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN   0x10
+
+#define REG_PCIE_PHYMISC	    0x1000
+#define PCIE_PHYMISC_FORCE_RCV_DET	0x4
+
+#define REG_LTSSM_TEST_MODE         0x12FC
+#define         LTSSM_TEST_MODE_DEF     0xE000
+
+/* Selene Master Control Register */
+#define REG_MASTER_CTRL             0x1400
+#define     MASTER_CTRL_SOFT_RST            0x1
+#define     MASTER_CTRL_MTIMER_EN           0x2
+#define     MASTER_CTRL_ITIMER_EN           0x4
+#define     MASTER_CTRL_MANUAL_INT          0x8
+#define     MASTER_CTRL_ITIMER2_EN          0x20
+#define     MASTER_CTRL_INT_RDCLR           0x40
+#define     MASTER_CTRL_LED_MODE	    0x200
+#define     MASTER_CTRL_REV_NUM_SHIFT       16
+#define     MASTER_CTRL_REV_NUM_MASK        0xff
+#define     MASTER_CTRL_DEV_ID_SHIFT        24
+#define     MASTER_CTRL_DEV_ID_MASK         0xff
+
+/* Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT       0x1404
+
+
+/* IRQ ModeratorTimer Initial Value Register */
+#define REG_IRQ_MODU_TIMER_INIT     0x1408   /* w */
+#define REG_IRQ_MODU_TIMER2_INIT    0x140A   /* w */
+
+
+#define REG_GPHY_CTRL               0x140C
+#define     GPHY_CTRL_EXT_RESET         1
+#define     GPHY_CTRL_PIPE_MOD          2
+#define     GPHY_CTRL_TEST_MODE_MASK    3
+#define     GPHY_CTRL_TEST_MODE_SHIFT   2
+#define     GPHY_CTRL_BERT_START        0x10
+#define     GPHY_CTRL_GATE_25M_EN       0x20
+#define     GPHY_CTRL_LPW_EXIT          0x40
+#define     GPHY_CTRL_PHY_IDDQ          0x80
+#define     GPHY_CTRL_PHY_IDDQ_DIS      0x100
+#define     GPHY_CTRL_PCLK_SEL_DIS      0x200
+#define     GPHY_CTRL_HIB_EN            0x400
+#define     GPHY_CTRL_HIB_PULSE         0x800
+#define     GPHY_CTRL_SEL_ANA_RST       0x1000
+#define     GPHY_CTRL_PHY_PLL_ON        0x2000
+#define     GPHY_CTRL_PWDOWN_HW		0x4000
+#define     GPHY_CTRL_DEFAULT (\
+		GPHY_CTRL_PHY_PLL_ON	|\
+		GPHY_CTRL_SEL_ANA_RST	|\
+		GPHY_CTRL_HIB_PULSE	|\
+		GPHY_CTRL_HIB_EN)
+
+#define     GPHY_CTRL_PW_WOL_DIS (\
+		GPHY_CTRL_PHY_PLL_ON	|\
+		GPHY_CTRL_SEL_ANA_RST	|\
+		GPHY_CTRL_HIB_PULSE	|\
+		GPHY_CTRL_HIB_EN	|\
+		GPHY_CTRL_PWDOWN_HW	|\
+		GPHY_CTRL_PCLK_SEL_DIS	|\
+		GPHY_CTRL_PHY_IDDQ)
+
+/* IRQ Anti-Lost Timer Initial Value Register */
+#define REG_CMBDISDMA_TIMER         0x140E
+
+
+/* Block IDLE Status Register */
+#define REG_IDLE_STATUS  	0x1410
+#define     IDLE_STATUS_RXMAC       1    /* 1: RXMAC state machine is in non-IDLE state. 0: RXMAC is idling */
+#define     IDLE_STATUS_TXMAC       2    /* 1: TXMAC state machine is in non-IDLE state. 0: TXMAC is idling */
+#define     IDLE_STATUS_RXQ         4    /* 1: RXQ state machine is in non-IDLE state.   0: RXQ is idling   */
+#define     IDLE_STATUS_TXQ         8    /* 1: TXQ state machine is in non-IDLE state.   0: TXQ is idling   */
+#define     IDLE_STATUS_DMAR        0x10 /* 1: DMAR state machine is in non-IDLE state.  0: DMAR is idling  */
+#define     IDLE_STATUS_DMAW        0x20 /* 1: DMAW state machine is in non-IDLE state.  0: DMAW is idling  */
+#define     IDLE_STATUS_SMB         0x40 /* 1: SMB state machine is in non-IDLE state.   0: SMB is idling   */
+#define     IDLE_STATUS_CMB         0x80 /* 1: CMB state machine is in non-IDLE state.   0: CMB is idling   */
+
+/* MDIO Control Register */
+#define REG_MDIO_CTRL           0x1414
+#define     MDIO_DATA_MASK          0xffff  /* On MDIO write, the 16-bit control data to write to PHY MII management register */
+#define     MDIO_DATA_SHIFT         0       /* On MDIO read, the 16-bit status data that was read from the PHY MII management register*/
+#define     MDIO_REG_ADDR_MASK      0x1f    /* MDIO register address */
+#define     MDIO_REG_ADDR_SHIFT     16
+#define     MDIO_RW                 0x200000      /* 1: read, 0: write */
+#define     MDIO_SUP_PREAMBLE       0x400000      /* Suppress preamble */
+#define     MDIO_START              0x800000      /* Write 1 to initiate the MDIO master. And this bit is self cleared after one cycle*/
+#define     MDIO_CLK_SEL_SHIFT      24
+#define     MDIO_CLK_25_4           0
+#define     MDIO_CLK_25_6           2
+#define     MDIO_CLK_25_8           3
+#define     MDIO_CLK_25_10          4
+#define     MDIO_CLK_25_14          5
+#define     MDIO_CLK_25_20          6
+#define     MDIO_CLK_25_28          7
+#define     MDIO_BUSY               0x8000000
+#define     MDIO_AP_EN              0x10000000
+#define MDIO_WAIT_TIMES         10
+
+/* MII PHY Status Register */
+#define REG_PHY_STATUS           0x1418
+#define     PHY_STATUS_100M	      0x20000
+#define     PHY_STATUS_EMI_CA	      0x40000
+
+/* BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL              0x141c
+#define     BIST0_NOW                   0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */
+/* BIST process and reset to zero when BIST is done */
+#define     BIST0_SRAM_FAIL             0x2 /* 1: The SRAM failure is un-repairable because it has address */
+/* decoder failure or more than 1 cell stuck-to-x failure */
+#define     BIST0_FUSE_FLAG             0x4 /* 1: Indicating one cell has been fixed */
+
+/* BIST Control and Status Register1(for the retry buffer of PCI Express) */
+#define REG_BIST1_CTRL              0x1420
+#define     BIST1_NOW                   0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */
+/* BIST process and reset to zero when BIST is done */
+#define     BIST1_SRAM_FAIL             0x2 /* 1: The SRAM failure is un-repairable because it has address */
+/* decoder failure or more than 1 cell stuck-to-x failure.*/
+#define     BIST1_FUSE_FLAG             0x4
+
+/* SerDes Lock Detect Control and Status Register */
+#define REG_SERDES_LOCK             0x1424
+#define     SERDES_LOCK_DETECT          1  /* 1: SerDes lock detected . This signal comes from Analog SerDes */
+#define     SERDES_LOCK_DETECT_EN       2  /* 1: Enable SerDes Lock detect function */
+
+/* MAC Control Register  */
+#define REG_MAC_CTRL                0x1480
+#define     MAC_CTRL_TX_EN              1  /* 1: Transmit Enable */
+#define     MAC_CTRL_RX_EN              2  /* 1: Receive Enable */
+#define     MAC_CTRL_TX_FLOW            4  /* 1: Transmit Flow Control Enable */
+#define     MAC_CTRL_RX_FLOW            8  /* 1: Receive Flow Control Enable */
+#define     MAC_CTRL_LOOPBACK           0x10      /* 1: Loop back at G/MII Interface */
+#define     MAC_CTRL_DUPLX              0x20      /* 1: Full-duplex mode  0: Half-duplex mode */
+#define     MAC_CTRL_ADD_CRC            0x40      /* 1: Instruct MAC to attach CRC on all egress Ethernet frames */
+#define     MAC_CTRL_PAD                0x80      /* 1: Instruct MAC to pad short frames to 60-bytes, and then attach CRC. This bit has higher priority over CRC_EN */
+#define     MAC_CTRL_LENCHK             0x100     /* 1: Instruct MAC to check if length field matches the real packet length */
+#define     MAC_CTRL_HUGE_EN            0x200     /* 1: receive Jumbo frame enable */
+#define     MAC_CTRL_PRMLEN_SHIFT       10        /* Preamble length */
+#define     MAC_CTRL_PRMLEN_MASK        0xf
+#define     MAC_CTRL_RMV_VLAN           0x4000    /* 1: to remove VLAN Tag automatically from all receive packets */
+#define     MAC_CTRL_PROMIS_EN          0x8000    /* 1: Promiscuous Mode Enable */
+#define     MAC_CTRL_TX_PAUSE           0x10000   /* 1: transmit test pause */
+#define     MAC_CTRL_SCNT               0x20000   /* 1: shortcut slot time counter */
+#define     MAC_CTRL_SRST_TX            0x40000   /* 1: synchronized reset Transmit MAC module */
+#define     MAC_CTRL_TX_SIMURST         0x80000   /* 1: transmit simulation reset */
+#define     MAC_CTRL_SPEED_SHIFT        20        /* 10: gigabit 01:10M/100M */
+#define     MAC_CTRL_SPEED_MASK         0x300000
+#define     MAC_CTRL_SPEED_1000         2
+#define     MAC_CTRL_SPEED_10_100       1
+#define     MAC_CTRL_DBG_TX_BKPRESURE   0x400000  /* 1: transmit maximum backoff (half-duplex test bit) */
+#define     MAC_CTRL_TX_HUGE            0x800000  /* 1: transmit huge enable */
+#define     MAC_CTRL_RX_CHKSUM_EN       0x1000000 /* 1: RX checksum enable */
+#define     MAC_CTRL_MC_ALL_EN          0x2000000 /* 1: upload all multicast frame without error to system */
+#define     MAC_CTRL_BC_EN              0x4000000 /* 1: upload all broadcast frame without error to system */
+#define     MAC_CTRL_DBG                0x8000000 /* 1: upload all received frame to system (Debug Mode) */
+
+/* MAC IPG/IFG Control Register  */
+#define REG_MAC_IPG_IFG             0x1484
+#define     MAC_IPG_IFG_IPGT_SHIFT      0     /* Desired back to back inter-packet gap. The default is 96-bit time */
+#define     MAC_IPG_IFG_IPGT_MASK       0x7f
+#define     MAC_IPG_IFG_MIFG_SHIFT      8     /* Minimum number of IFG to enforce in between RX frames */
+#define     MAC_IPG_IFG_MIFG_MASK       0xff  /* Frame gap below such IFP is dropped */
+#define     MAC_IPG_IFG_IPGR1_SHIFT     16    /* 64bit Carrier-Sense window */
+#define     MAC_IPG_IFG_IPGR1_MASK      0x7f
+#define     MAC_IPG_IFG_IPGR2_SHIFT     24    /* 96-bit IPG window */
+#define     MAC_IPG_IFG_IPGR2_MASK      0x7f
+
+/* MAC STATION ADDRESS  */
+#define REG_MAC_STA_ADDR            0x1488
+
+/* Hash table for multicast address */
+#define REG_RX_HASH_TABLE           0x1490
+
+
+/* MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL     0x1498
+#define     MAC_HALF_DUPLX_CTRL_LCOL_SHIFT   0      /* Collision Window */
+#define     MAC_HALF_DUPLX_CTRL_LCOL_MASK    0x3ff
+#define     MAC_HALF_DUPLX_CTRL_RETRY_SHIFT  12     /* Retransmission maximum, afterwards the packet will be discarded */
+#define     MAC_HALF_DUPLX_CTRL_RETRY_MASK   0xf
+#define     MAC_HALF_DUPLX_CTRL_EXC_DEF_EN   0x10000 /* 1: Allow the transmission of a packet which has been excessively deferred */
+#define     MAC_HALF_DUPLX_CTRL_NO_BACK_C    0x20000 /* 1: No back-off on collision, immediately start the retransmission */
+#define     MAC_HALF_DUPLX_CTRL_NO_BACK_P    0x40000 /* 1: No back-off on backpressure, immediately start the transmission after back pressure */
+#define     MAC_HALF_DUPLX_CTRL_ABEBE        0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */
+#define     MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT  20      /* Maximum binary exponential number */
+#define     MAC_HALF_DUPLX_CTRL_ABEBT_MASK   0xf
+#define     MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24      /* IPG to start JAM for collision based flow control in half-duplex */
+#define     MAC_HALF_DUPLX_CTRL_JAMIPG_MASK  0xf     /* mode. In unit of 8-bit time */
+
+/* Maximum Frame Length Control Register   */
+#define REG_MTU                     0x149c
+
+/* Wake-On-Lan control register */
+#define REG_WOL_CTRL                0x14a0
+#define     WOL_PATTERN_EN                  0x00000001
+#define     WOL_PATTERN_PME_EN              0x00000002
+#define     WOL_MAGIC_EN                    0x00000004
+#define     WOL_MAGIC_PME_EN                0x00000008
+#define     WOL_LINK_CHG_EN                 0x00000010
+#define     WOL_LINK_CHG_PME_EN             0x00000020
+#define     WOL_PATTERN_ST                  0x00000100
+#define     WOL_MAGIC_ST                    0x00000200
+#define     WOL_LINKCHG_ST                  0x00000400
+#define     WOL_CLK_SWITCH_EN               0x00008000
+#define     WOL_PT0_EN                      0x00010000
+#define     WOL_PT1_EN                      0x00020000
+#define     WOL_PT2_EN                      0x00040000
+#define     WOL_PT3_EN                      0x00080000
+#define     WOL_PT4_EN                      0x00100000
+#define     WOL_PT5_EN                      0x00200000
+#define     WOL_PT6_EN                      0x00400000
+/* WOL Length ( 2 DWORD ) */
+#define REG_WOL_PATTERN_LEN         0x14a4
+#define     WOL_PT_LEN_MASK                 0x7f
+#define     WOL_PT0_LEN_SHIFT               0
+#define     WOL_PT1_LEN_SHIFT               8
+#define     WOL_PT2_LEN_SHIFT               16
+#define     WOL_PT3_LEN_SHIFT               24
+#define     WOL_PT4_LEN_SHIFT               0
+#define     WOL_PT5_LEN_SHIFT               8
+#define     WOL_PT6_LEN_SHIFT               16
+
+/* Internal SRAM Partition Register */
+#define REG_SRAM_TRD_ADDR           0x1518
+#define REG_SRAM_TRD_LEN            0x151C
+#define REG_SRAM_RXF_ADDR           0x1520
+#define REG_SRAM_RXF_LEN            0x1524
+#define REG_SRAM_TXF_ADDR           0x1528
+#define REG_SRAM_TXF_LEN            0x152C
+#define REG_SRAM_TCPH_ADDR          0x1530
+#define REG_SRAM_PKTH_ADDR          0x1532
+
+/* Load Ptr Register */
+#define REG_LOAD_PTR                0x1534  /* Software sets this bit after the initialization of the head and tail */
+
+/*
+ * addresses of all descriptors, as well as the following descriptor
+ * control register, which triggers each function block to load the head
+ * pointer to prepare for the operation. This bit is then self-cleared
+ * after one cycle.
+ */
+
+/* Descriptor Control register  */
+#define REG_RXF3_BASE_ADDR_HI           0x153C
+#define REG_DESC_BASE_ADDR_HI           0x1540
+#define REG_RXF0_BASE_ADDR_HI           0x1540 /* share with DESC BASE ADDR HI */
+#define REG_HOST_RXF0_PAGE0_LO          0x1544
+#define REG_HOST_RXF0_PAGE1_LO          0x1548
+#define REG_TPD_BASE_ADDR_LO            0x154C
+#define REG_RXF1_BASE_ADDR_HI           0x1550
+#define REG_RXF2_BASE_ADDR_HI           0x1554
+#define REG_HOST_RXFPAGE_SIZE           0x1558
+#define REG_TPD_RING_SIZE               0x155C
+/* RSS about */
+#define REG_RSS_KEY0                    0x14B0
+#define REG_RSS_KEY1                    0x14B4
+#define REG_RSS_KEY2                    0x14B8
+#define REG_RSS_KEY3                    0x14BC
+#define REG_RSS_KEY4                    0x14C0
+#define REG_RSS_KEY5                    0x14C4
+#define REG_RSS_KEY6                    0x14C8
+#define REG_RSS_KEY7                    0x14CC
+#define REG_RSS_KEY8                    0x14D0
+#define REG_RSS_KEY9                    0x14D4
+#define REG_IDT_TABLE4                  0x14E0
+#define REG_IDT_TABLE5                  0x14E4
+#define REG_IDT_TABLE6                  0x14E8
+#define REG_IDT_TABLE7                  0x14EC
+#define REG_IDT_TABLE0                  0x1560
+#define REG_IDT_TABLE1                  0x1564
+#define REG_IDT_TABLE2                  0x1568
+#define REG_IDT_TABLE3                  0x156C
+#define REG_IDT_TABLE                   REG_IDT_TABLE0
+#define REG_RSS_HASH_VALUE              0x1570
+#define REG_RSS_HASH_FLAG               0x1574
+#define REG_BASE_CPU_NUMBER             0x157C
+
+
+/* TXQ Control Register */
+#define REG_TXQ_CTRL                0x1580
+#define     TXQ_CTRL_NUM_TPD_BURST_MASK     0xF
+#define     TXQ_CTRL_NUM_TPD_BURST_SHIFT    0
+#define     TXQ_CTRL_EN                     0x20  /* 1: Enable TXQ */
+#define     TXQ_CTRL_ENH_MODE               0x40  /* Performance enhancement mode, in which up to two back-to-back DMA read commands might be dispatched. */
+#define     TXQ_CTRL_TXF_BURST_NUM_SHIFT    16    /* Number of data byte to read in a cache-aligned burst. Each SRAM entry is 8-byte in length. */
+#define     TXQ_CTRL_TXF_BURST_NUM_MASK     0xffff
+
+/* Jumbo packet Threshold for task offload */
+#define REG_TX_EARLY_TH                     0x1584 /* Jumbo frame threshold in QWORD unit. Packet greater than */
+/* JUMBO_TASK_OFFLOAD_THRESHOLD will not be task offloaded. */
+#define     TX_TX_EARLY_TH_MASK             0x7ff
+#define     TX_TX_EARLY_TH_SHIFT            0
+
+
+/* RXQ Control Register */
+#define REG_RXQ_CTRL                0x15A0
+#define         RXQ_CTRL_PBA_ALIGN_32                   0   /* rx-packet alignment */
+#define         RXQ_CTRL_PBA_ALIGN_64                   1
+#define         RXQ_CTRL_PBA_ALIGN_128                  2
+#define         RXQ_CTRL_PBA_ALIGN_256                  3
+#define         RXQ_CTRL_Q1_EN				0x10
+#define         RXQ_CTRL_Q2_EN				0x20
+#define         RXQ_CTRL_Q3_EN				0x40
+#define         RXQ_CTRL_IPV6_XSUM_VERIFY_EN		0x80
+#define         RXQ_CTRL_HASH_TLEN_SHIFT                8
+#define         RXQ_CTRL_HASH_TLEN_MASK                 0xFF
+#define         RXQ_CTRL_HASH_TYPE_IPV4                 0x10000
+#define         RXQ_CTRL_HASH_TYPE_IPV4_TCP             0x20000
+#define         RXQ_CTRL_HASH_TYPE_IPV6                 0x40000
+#define         RXQ_CTRL_HASH_TYPE_IPV6_TCP             0x80000
+#define         RXQ_CTRL_RSS_MODE_DISABLE               0
+#define         RXQ_CTRL_RSS_MODE_SQSINT                0x4000000
+#define         RXQ_CTRL_RSS_MODE_MQUESINT              0x8000000
+#define         RXQ_CTRL_RSS_MODE_MQUEMINT              0xC000000
+#define         RXQ_CTRL_NIP_QUEUE_SEL_TBL              0x10000000
+#define         RXQ_CTRL_HASH_ENABLE                    0x20000000
+#define         RXQ_CTRL_CUT_THRU_EN                    0x40000000
+#define         RXQ_CTRL_EN                             0x80000000
+
+/* Rx jumbo packet threshold and rrd  retirement timer  */
+#define REG_RXQ_JMBOSZ_RRDTIM       0x15A4
+/*
+ * Jumbo packet threshold for non-VLAN packet, in QWORD (64-bit) unit.
+ * When the packet length greater than or equal to this value, RXQ
+ * shall start cut-through forwarding of the received packet.
+ */
+#define         RXQ_JMBOSZ_TH_MASK      0x7ff
+#define         RXQ_JMBOSZ_TH_SHIFT         0  /* RRD retirement timer. Decrement by 1 after every 512ns passes*/
+#define         RXQ_JMBO_LKAH_MASK          0xf
+#define         RXQ_JMBO_LKAH_SHIFT         11
+
+/* RXF flow control register */
+#define REG_RXQ_RXF_PAUSE_THRESH    0x15A8
+#define     RXQ_RXF_PAUSE_TH_HI_SHIFT       0
+#define     RXQ_RXF_PAUSE_TH_HI_MASK        0xfff
+#define     RXQ_RXF_PAUSE_TH_LO_SHIFT       16
+#define     RXQ_RXF_PAUSE_TH_LO_MASK        0xfff
+
+
+/* DMA Engine Control Register */
+#define REG_DMA_CTRL                0x15C0
+#define     DMA_CTRL_DMAR_IN_ORDER          0x1
+#define     DMA_CTRL_DMAR_ENH_ORDER         0x2
+#define     DMA_CTRL_DMAR_OUT_ORDER         0x4
+#define     DMA_CTRL_RCB_VALUE              0x8
+#define     DMA_CTRL_DMAR_BURST_LEN_SHIFT   4
+#define     DMA_CTRL_DMAR_BURST_LEN_MASK    7
+#define     DMA_CTRL_DMAW_BURST_LEN_SHIFT   7
+#define     DMA_CTRL_DMAW_BURST_LEN_MASK    7
+#define     DMA_CTRL_DMAR_REQ_PRI           0x400
+#define     DMA_CTRL_DMAR_DLY_CNT_MASK      0x1F
+#define     DMA_CTRL_DMAR_DLY_CNT_SHIFT     11
+#define     DMA_CTRL_DMAW_DLY_CNT_MASK      0xF
+#define     DMA_CTRL_DMAW_DLY_CNT_SHIFT     16
+#define     DMA_CTRL_TXCMB_EN               0x100000
+#define     DMA_CTRL_RXCMB_EN				0x200000
+
+
+/* CMB/SMB Control Register */
+#define REG_SMB_STAT_TIMER                      0x15C4
+#define REG_TRIG_RRD_THRESH                     0x15CA
+#define REG_TRIG_TPD_THRESH                     0x15C8
+#define REG_TRIG_TXTIMER                        0x15CC
+#define REG_TRIG_RXTIMER                        0x15CE
+
+/* HOST RXF Page 1,2,3 address */
+#define REG_HOST_RXF1_PAGE0_LO                  0x15D0
+#define REG_HOST_RXF1_PAGE1_LO                  0x15D4
+#define REG_HOST_RXF2_PAGE0_LO                  0x15D8
+#define REG_HOST_RXF2_PAGE1_LO                  0x15DC
+#define REG_HOST_RXF3_PAGE0_LO                  0x15E0
+#define REG_HOST_RXF3_PAGE1_LO                  0x15E4
+
+/* Mail box */
+#define REG_MB_RXF1_RADDR                       0x15B4
+#define REG_MB_RXF2_RADDR                       0x15B8
+#define REG_MB_RXF3_RADDR                       0x15BC
+#define REG_MB_TPD_PROD_IDX                     0x15F0
+
+/* RXF-Page 0-3  PageNo & Valid bit */
+#define REG_HOST_RXF0_PAGE0_VLD     0x15F4
+#define     HOST_RXF_VALID              1
+#define     HOST_RXF_PAGENO_SHIFT       1
+#define     HOST_RXF_PAGENO_MASK        0x7F
+#define REG_HOST_RXF0_PAGE1_VLD     0x15F5
+#define REG_HOST_RXF1_PAGE0_VLD     0x15F6
+#define REG_HOST_RXF1_PAGE1_VLD     0x15F7
+#define REG_HOST_RXF2_PAGE0_VLD     0x15F8
+#define REG_HOST_RXF2_PAGE1_VLD     0x15F9
+#define REG_HOST_RXF3_PAGE0_VLD     0x15FA
+#define REG_HOST_RXF3_PAGE1_VLD     0x15FB
+
+/* Interrupt Status Register */
+#define REG_ISR    0x1600
+#define  ISR_SMB   		1
+#define  ISR_TIMER		2       /* Interrupt when Timer is counted down to zero */
+/*
+ * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set
+ * in Table 51 Selene Master Control Register (Offset 0x1400).
+ */
+#define  ISR_MANUAL         	4
+#define  ISR_HW_RXF_OV          8        /* RXF overflow interrupt */
+#define  ISR_HOST_RXF0_OV       0x10
+#define  ISR_HOST_RXF1_OV       0x20
+#define  ISR_HOST_RXF2_OV       0x40
+#define  ISR_HOST_RXF3_OV       0x80
+#define  ISR_TXF_UN             0x100
+#define  ISR_RX0_PAGE_FULL      0x200
+#define  ISR_DMAR_TO_RST        0x400
+#define  ISR_DMAW_TO_RST        0x800
+#define  ISR_GPHY               0x1000
+#define  ISR_TX_CREDIT          0x2000
+#define  ISR_GPHY_LPW           0x4000    /* GPHY low power state interrupt */
+#define  ISR_RX_PKT             0x10000   /* One packet received, triggered by RFD */
+#define  ISR_TX_PKT             0x20000   /* One packet transmitted, triggered by TPD */
+#define  ISR_TX_DMA             0x40000
+#define  ISR_RX_PKT_1           0x80000
+#define  ISR_RX_PKT_2           0x100000
+#define  ISR_RX_PKT_3           0x200000
+#define  ISR_MAC_RX             0x400000
+#define  ISR_MAC_TX             0x800000
+#define  ISR_UR_DETECTED        0x1000000
+#define  ISR_FERR_DETECTED      0x2000000
+#define  ISR_NFERR_DETECTED     0x4000000
+#define  ISR_CERR_DETECTED      0x8000000
+#define  ISR_PHY_LINKDOWN       0x10000000
+#define  ISR_DIS_INT            0x80000000
+
+
+/* Interrupt Mask Register */
+#define REG_IMR 0x1604
+
+
+#define IMR_NORMAL_MASK (\
+		ISR_SMB	        |\
+		ISR_TXF_UN      |\
+		ISR_HW_RXF_OV   |\
+		ISR_HOST_RXF0_OV|\
+		ISR_MANUAL      |\
+		ISR_GPHY        |\
+		ISR_GPHY_LPW    |\
+		ISR_DMAR_TO_RST |\
+		ISR_DMAW_TO_RST |\
+		ISR_PHY_LINKDOWN|\
+		ISR_RX_PKT      |\
+		ISR_TX_PKT)
+
+#define ISR_TX_EVENT (ISR_TXF_UN | ISR_TX_PKT)
+#define ISR_RX_EVENT (ISR_HOST_RXF0_OV | ISR_HW_RXF_OV | ISR_RX_PKT)
+
+#define REG_MAC_RX_STATUS_BIN 0x1700
+#define REG_MAC_RX_STATUS_END 0x175c
+#define REG_MAC_TX_STATUS_BIN 0x1760
+#define REG_MAC_TX_STATUS_END 0x17c0
+
+/* Hardware Offset Register */
+#define REG_HOST_RXF0_PAGEOFF 0x1800
+#define REG_TPD_CONS_IDX      0x1804
+#define REG_HOST_RXF1_PAGEOFF 0x1808
+#define REG_HOST_RXF2_PAGEOFF 0x180C
+#define REG_HOST_RXF3_PAGEOFF 0x1810
+
+/* RXF-Page 0-3 Offset DMA Address */
+#define REG_HOST_RXF0_MB0_LO  0x1820
+#define REG_HOST_RXF0_MB1_LO  0x1824
+#define REG_HOST_RXF1_MB0_LO  0x1828
+#define REG_HOST_RXF1_MB1_LO  0x182C
+#define REG_HOST_RXF2_MB0_LO  0x1830
+#define REG_HOST_RXF2_MB1_LO  0x1834
+#define REG_HOST_RXF3_MB0_LO  0x1838
+#define REG_HOST_RXF3_MB1_LO  0x183C
+
+/* Tpd CMB DMA Address */
+#define REG_HOST_TX_CMB_LO    0x1840
+#define REG_HOST_SMB_ADDR_LO  0x1844
+
+/* DEBUG ADDR */
+#define REG_DEBUG_DATA0 0x1900
+#define REG_DEBUG_DATA1 0x1904
+
+/***************************** MII definition ***************************************/
+/* PHY Common Register */
+#define MII_BMCR                        0x00
+#define MII_BMSR                        0x01
+#define MII_PHYSID1                     0x02
+#define MII_PHYSID2                     0x03
+#define MII_ADVERTISE                   0x04
+#define MII_LPA                         0x05
+#define MII_EXPANSION                   0x06
+#define MII_AT001_CR                    0x09
+#define MII_AT001_SR                    0x0A
+#define MII_AT001_ESR                   0x0F
+#define MII_AT001_PSCR                  0x10
+#define MII_AT001_PSSR                  0x11
+#define MII_INT_CTRL                    0x12
+#define MII_INT_STATUS                  0x13
+#define MII_SMARTSPEED                  0x14
+#define MII_RERRCOUNTER                 0x15
+#define MII_SREVISION                   0x16
+#define MII_RESV1                       0x17
+#define MII_LBRERROR                    0x18
+#define MII_PHYADDR                     0x19
+#define MII_RESV2                       0x1a
+#define MII_TPISTATUS                   0x1b
+#define MII_NCONFIG                     0x1c
+
+#define MII_DBG_ADDR			0x1D
+#define MII_DBG_DATA			0x1E
+
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB                  0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE                  0x0080  /* Collision test enable */
+#define MII_CR_FULL_DUPLEX                       0x0100  /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG                  0x0200  /* Restart auto negotiation */
+#define MII_CR_ISOLATE                           0x0400  /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN                        0x0800  /* Power down */
+#define MII_CR_AUTO_NEG_EN                       0x1000  /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB                  0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK                          0x4000  /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET                             0x8000  /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_MASK                        0x2040
+#define MII_CR_SPEED_1000                        0x0040
+#define MII_CR_SPEED_100                         0x2000
+#define MII_CR_SPEED_10                          0x0000
+
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS                     0x0001  /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT                     0x0002  /* Jabber Detected */
+#define MII_SR_LINK_STATUS                       0x0004  /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS                      0x0008  /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT                      0x0010  /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE                  0x0020  /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS                 0x0040  /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS                   0x0100  /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS                     0x0200  /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS                     0x0400  /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS                       0x0800  /* 10T   Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS                       0x1000  /* 10T   Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS                      0x2000  /* 100X  Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS                      0x4000  /* 100X  Full Duplex Capable */
+#define MII_SR_100T4_CAPS                        0x8000  /* 100T4 Capable */
+
+/* Link partner ability register. */
+#define MII_LPA_SLCT                             0x001f  /* Same as advertise selector  */
+#define MII_LPA_10HALF                           0x0020  /* Can do 10mbps half-duplex   */
+#define MII_LPA_10FULL                           0x0040  /* Can do 10mbps full-duplex   */
+#define MII_LPA_100HALF                          0x0080  /* Can do 100mbps half-duplex  */
+#define MII_LPA_100FULL                          0x0100  /* Can do 100mbps full-duplex  */
+#define MII_LPA_100BASE4                         0x0200  /* 100BASE-T4  */
+#define MII_LPA_PAUSE                            0x0400  /* PAUSE */
+#define MII_LPA_ASYPAUSE                         0x0800  /* Asymmetrical PAUSE */
+#define MII_LPA_RFAULT                           0x2000  /* Link partner faulted        */
+#define MII_LPA_LPACK                            0x4000  /* Link partner acked us       */
+#define MII_LPA_NPAGE                            0x8000  /* Next page bit               */
+
+/* Autoneg Advertisement Register */
+#define MII_AR_SELECTOR_FIELD                   0x0001  /* indicates IEEE 802.3 CSMA/CD */
+#define MII_AR_10T_HD_CAPS                      0x0020  /* 10T   Half Duplex Capable */
+#define MII_AR_10T_FD_CAPS                      0x0040  /* 10T   Full Duplex Capable */
+#define MII_AR_100TX_HD_CAPS                    0x0080  /* 100TX Half Duplex Capable */
+#define MII_AR_100TX_FD_CAPS                    0x0100  /* 100TX Full Duplex Capable */
+#define MII_AR_100T4_CAPS                       0x0200  /* 100T4 Capable */
+#define MII_AR_PAUSE                            0x0400  /* Pause operation desired */
+#define MII_AR_ASM_DIR                          0x0800  /* Asymmetric Pause Direction bit */
+#define MII_AR_REMOTE_FAULT                     0x2000  /* Remote Fault detected */
+#define MII_AR_NEXT_PAGE                        0x8000  /* Next Page ability supported */
+#define MII_AR_SPEED_MASK                       0x01E0
+#define MII_AR_DEFAULT_CAP_MASK                 0x0DE0
+
+/* 1000BASE-T Control Register */
+#define MII_AT001_CR_1000T_HD_CAPS              0x0100  /* Advertise 1000T HD capability */
+#define MII_AT001_CR_1000T_FD_CAPS              0x0200  /* Advertise 1000T FD capability  */
+#define MII_AT001_CR_1000T_REPEATER_DTE         0x0400  /* 1=Repeater/switch device port */
+/* 0=DTE device */
+#define MII_AT001_CR_1000T_MS_VALUE             0x0800  /* 1=Configure PHY as Master */
+/* 0=Configure PHY as Slave */
+#define MII_AT001_CR_1000T_MS_ENABLE            0x1000  /* 1=Master/Slave manual config value */
+/* 0=Automatic Master/Slave config */
+#define MII_AT001_CR_1000T_TEST_MODE_NORMAL     0x0000  /* Normal Operation */
+#define MII_AT001_CR_1000T_TEST_MODE_1          0x2000  /* Transmit Waveform test */
+#define MII_AT001_CR_1000T_TEST_MODE_2          0x4000  /* Master Transmit Jitter test */
+#define MII_AT001_CR_1000T_TEST_MODE_3          0x6000  /* Slave Transmit Jitter test */
+#define MII_AT001_CR_1000T_TEST_MODE_4          0x8000  /* Transmitter Distortion test */
+#define MII_AT001_CR_1000T_SPEED_MASK           0x0300
+#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK     0x0300
+
+/* 1000BASE-T Status Register */
+#define MII_AT001_SR_1000T_LP_HD_CAPS           0x0400  /* LP is 1000T HD capable */
+#define MII_AT001_SR_1000T_LP_FD_CAPS           0x0800  /* LP is 1000T FD capable */
+#define MII_AT001_SR_1000T_REMOTE_RX_STATUS     0x1000  /* Remote receiver OK */
+#define MII_AT001_SR_1000T_LOCAL_RX_STATUS      0x2000  /* Local receiver OK */
+#define MII_AT001_SR_1000T_MS_CONFIG_RES        0x4000  /* 1=Local TX is Master, 0=Slave */
+#define MII_AT001_SR_1000T_MS_CONFIG_FAULT      0x8000  /* Master/Slave config fault */
+#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT   12
+#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT    13
+
+/* Extended Status Register */
+#define MII_AT001_ESR_1000T_HD_CAPS             0x1000  /* 1000T HD capable */
+#define MII_AT001_ESR_1000T_FD_CAPS             0x2000  /* 1000T FD capable */
+#define MII_AT001_ESR_1000X_HD_CAPS             0x4000  /* 1000X HD capable */
+#define MII_AT001_ESR_1000X_FD_CAPS             0x8000  /* 1000X FD capable */
+
+/* AT001 PHY Specific Control Register */
+#define MII_AT001_PSCR_JABBER_DISABLE           0x0001  /* 1=Jabber Function disabled */
+#define MII_AT001_PSCR_POLARITY_REVERSAL        0x0002  /* 1=Polarity Reversal enabled */
+#define MII_AT001_PSCR_SQE_TEST                 0x0004  /* 1=SQE Test enabled */
+#define MII_AT001_PSCR_MAC_POWERDOWN            0x0008
+#define MII_AT001_PSCR_CLK125_DISABLE           0x0010  /* 1=CLK125 low,
+							 * 0=CLK125 toggling
+							 */
+#define MII_AT001_PSCR_MDI_MANUAL_MODE          0x0000  /* MDI Crossover Mode bits 6:5 */
+/* Manual MDI configuration */
+#define MII_AT001_PSCR_MDIX_MANUAL_MODE         0x0020  /* Manual MDIX configuration */
+#define MII_AT001_PSCR_AUTO_X_1000T             0x0040  /* 1000BASE-T: Auto crossover,
+							 *  100BASE-TX/10BASE-T:
+							 *  MDI Mode
+							 */
+#define MII_AT001_PSCR_AUTO_X_MODE              0x0060  /* Auto crossover enabled
+							 * all speeds.
+							 */
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE     0x0080
+/* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
+#define MII_AT001_PSCR_MII_5BIT_ENABLE          0x0100
+/* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define MII_AT001_PSCR_SCRAMBLER_DISABLE        0x0200  /* 1=Scrambler disable */
+#define MII_AT001_PSCR_FORCE_LINK_GOOD          0x0400  /* 1=Force link good */
+#define MII_AT001_PSCR_ASSERT_CRS_ON_TX         0x0800  /* 1=Assert CRS on Transmit */
+#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT    1
+#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT          5
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+/* AT001 PHY Specific Status Register */
+#define MII_AT001_PSSR_SPD_DPLX_RESOLVED        0x0800  /* 1=Speed & Duplex resolved */
+#define MII_AT001_PSSR_DPLX                     0x2000  /* 1=Duplex 0=Half Duplex */
+#define MII_AT001_PSSR_SPEED                    0xC000  /* Speed, bits 14:15 */
+#define MII_AT001_PSSR_10MBS                    0x0000  /* 00=10Mbs */
+#define MII_AT001_PSSR_100MBS                   0x4000  /* 01=100Mbs */
+#define MII_AT001_PSSR_1000MBS                  0x8000  /* 10=1000Mbs */
+
+#endif /*_ATHL1E_HW_H_*/
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
new file mode 100644
index 00000000000..367c7275063
--- /dev/null
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -0,0 +1,2599 @@
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include "atl1e.h"
+
+#define DRV_VERSION "1.0.0.7-NAPI"
+
+char atl1e_driver_name[] = "ATL1E";
+char atl1e_driver_version[] = DRV_VERSION;
+#define PCI_DEVICE_ID_ATTANSIC_L1E      0x1026
+/*
+ * atl1e_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ *   Class, Class Mask, private data (not used) }
+ */
+static struct pci_device_id atl1e_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)},
+	/* required last entry */
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, atl1e_pci_tbl);
+
+MODULE_AUTHOR("Atheros Corporation, <xiong.huang@atheros.com>, Jie Yang <jie.yang@atheros.com>");
+MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
+
+static const u16
+atl1e_rx_page_vld_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
+{
+	{REG_HOST_RXF0_PAGE0_VLD, REG_HOST_RXF0_PAGE1_VLD},
+	{REG_HOST_RXF1_PAGE0_VLD, REG_HOST_RXF1_PAGE1_VLD},
+	{REG_HOST_RXF2_PAGE0_VLD, REG_HOST_RXF2_PAGE1_VLD},
+	{REG_HOST_RXF3_PAGE0_VLD, REG_HOST_RXF3_PAGE1_VLD}
+};
+
+static const u16 atl1e_rx_page_hi_addr_regs[AT_MAX_RECEIVE_QUEUE] =
+{
+	REG_RXF0_BASE_ADDR_HI,
+	REG_RXF1_BASE_ADDR_HI,
+	REG_RXF2_BASE_ADDR_HI,
+	REG_RXF3_BASE_ADDR_HI
+};
+
+static const u16
+atl1e_rx_page_lo_addr_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
+{
+	{REG_HOST_RXF0_PAGE0_LO, REG_HOST_RXF0_PAGE1_LO},
+	{REG_HOST_RXF1_PAGE0_LO, REG_HOST_RXF1_PAGE1_LO},
+	{REG_HOST_RXF2_PAGE0_LO, REG_HOST_RXF2_PAGE1_LO},
+	{REG_HOST_RXF3_PAGE0_LO, REG_HOST_RXF3_PAGE1_LO}
+};
+
+static const u16
+atl1e_rx_page_write_offset_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
+{
+	{REG_HOST_RXF0_MB0_LO,  REG_HOST_RXF0_MB1_LO},
+	{REG_HOST_RXF1_MB0_LO,  REG_HOST_RXF1_MB1_LO},
+	{REG_HOST_RXF2_MB0_LO,  REG_HOST_RXF2_MB1_LO},
+	{REG_HOST_RXF3_MB0_LO,  REG_HOST_RXF3_MB1_LO}
+};
+
+static const u16 atl1e_pay_load_size[] = {
+	128, 256, 512, 1024, 2048, 4096,
+};
+
+/*
+ * atl1e_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ */
+static inline void atl1e_irq_enable(struct atl1e_adapter *adapter)
+{
+	if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
+		AT_WRITE_REG(&adapter->hw, REG_ISR, 0);
+		AT_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK);
+		AT_WRITE_FLUSH(&adapter->hw);
+	}
+}
+
+/*
+ * atl1e_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ */
+static inline void atl1e_irq_disable(struct atl1e_adapter *adapter)
+{
+	atomic_inc(&adapter->irq_sem);
+	AT_WRITE_REG(&adapter->hw, REG_IMR, 0);
+	AT_WRITE_FLUSH(&adapter->hw);
+	synchronize_irq(adapter->pdev->irq);
+}
+
+/*
+ * atl1e_irq_reset - reset interrupt confiure on the NIC
+ * @adapter: board private structure
+ */
+static inline void atl1e_irq_reset(struct atl1e_adapter *adapter)
+{
+	atomic_set(&adapter->irq_sem, 0);
+	AT_WRITE_REG(&adapter->hw, REG_ISR, 0);
+	AT_WRITE_REG(&adapter->hw, REG_IMR, 0);
+	AT_WRITE_FLUSH(&adapter->hw);
+}
+
+/*
+ * atl1e_phy_config - Timer Call-back
+ * @data: pointer to netdev cast into an unsigned long
+ */
+static void atl1e_phy_config(unsigned long data)
+{
+	struct atl1e_adapter *adapter = (struct atl1e_adapter *) data;
+	struct atl1e_hw *hw = &adapter->hw;
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->mdio_lock, flags);
+	atl1e_restart_autoneg(hw);
+	spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+}
+
+void atl1e_reinit_locked(struct atl1e_adapter *adapter)
+{
+
+	WARN_ON(in_interrupt());
+	while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+		msleep(1);
+	atl1e_down(adapter);
+	atl1e_up(adapter);
+	clear_bit(__AT_RESETTING, &adapter->flags);
+}
+
+static void atl1e_reset_task(struct work_struct *work)
+{
+	struct atl1e_adapter *adapter;
+	adapter = container_of(work, struct atl1e_adapter, reset_task);
+
+	atl1e_reinit_locked(adapter);
+}
+
+static int atl1e_check_link(struct atl1e_adapter *adapter)
+{
+	struct atl1e_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev    *pdev   = adapter->pdev;
+	int err = 0;
+	u16 speed, duplex, phy_data;
+
+	/* MII_BMSR must read twise */
+	atl1e_read_phy_reg(hw, MII_BMSR, &phy_data);
+	atl1e_read_phy_reg(hw, MII_BMSR, &phy_data);
+	if ((phy_data & BMSR_LSTATUS) == 0) {
+		/* link down */
+		if (netif_carrier_ok(netdev)) { /* old link state: Up */
+			u32 value;
+			/* disable rx */
+			value = AT_READ_REG(hw, REG_MAC_CTRL);
+			value &= ~MAC_CTRL_RX_EN;
+			AT_WRITE_REG(hw, REG_MAC_CTRL, value);
+			adapter->link_speed = SPEED_0;
+			netif_carrier_off(netdev);
+			netif_stop_queue(netdev);
+		}
+	} else {
+		/* Link Up */
+		err = atl1e_get_speed_and_duplex(hw, &speed, &duplex);
+		if (unlikely(err))
+			return err;
+
+		/* link result is our setting */
+		if (adapter->link_speed != speed ||
+		    adapter->link_duplex != duplex) {
+			adapter->link_speed  = speed;
+			adapter->link_duplex = duplex;
+			atl1e_setup_mac_ctrl(adapter);
+			dev_info(&pdev->dev,
+				"%s: %s NIC Link is Up<%d Mbps %s>\n",
+				atl1e_driver_name, netdev->name,
+				adapter->link_speed,
+				adapter->link_duplex == FULL_DUPLEX ?
+				"Full Duplex" : "Half Duplex");
+		}
+
+		if (!netif_carrier_ok(netdev)) {
+			/* Link down -> Up */
+			netif_carrier_on(netdev);
+			netif_wake_queue(netdev);
+		}
+	}
+	return 0;
+}
+
+/*
+ * atl1e_link_chg_task - deal with link change event Out of interrupt context
+ * @netdev: network interface device structure
+ */
+static void atl1e_link_chg_task(struct work_struct *work)
+{
+	struct atl1e_adapter *adapter;
+	unsigned long flags;
+
+	adapter = container_of(work, struct atl1e_adapter, link_chg_task);
+	spin_lock_irqsave(&adapter->mdio_lock, flags);
+	atl1e_check_link(adapter);
+	spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+}
+
+static void atl1e_link_chg_event(struct atl1e_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev    *pdev   = adapter->pdev;
+	u16 phy_data = 0;
+	u16 link_up = 0;
+
+	spin_lock(&adapter->mdio_lock);
+	atl1e_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+	atl1e_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+	spin_unlock(&adapter->mdio_lock);
+	link_up = phy_data & BMSR_LSTATUS;
+	/* notify upper layer link down ASAP */
+	if (!link_up) {
+		if (netif_carrier_ok(netdev)) {
+			/* old link state: Up */
+			dev_info(&pdev->dev, "%s: %s NIC Link is Down\n",
+					atl1e_driver_name, netdev->name);
+			adapter->link_speed = SPEED_0;
+			netif_stop_queue(netdev);
+		}
+	}
+	schedule_work(&adapter->link_chg_task);
+}
+
+static void atl1e_del_timer(struct atl1e_adapter *adapter)
+{
+	del_timer_sync(&adapter->phy_config_timer);
+}
+
+static void atl1e_cancel_work(struct atl1e_adapter *adapter)
+{
+	cancel_work_sync(&adapter->reset_task);
+	cancel_work_sync(&adapter->link_chg_task);
+}
+
+/*
+ * atl1e_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ */
+static void atl1e_tx_timeout(struct net_device *netdev)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+	/* Do the reset outside of interrupt context */
+	schedule_work(&adapter->reset_task);
+}
+
+/*
+ * atl1e_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated.  This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ */
+static void atl1e_set_multi(struct net_device *netdev)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct atl1e_hw *hw = &adapter->hw;
+	struct dev_mc_list *mc_ptr;
+	u32 mac_ctrl_data = 0;
+	u32 hash_value;
+
+	/* Check for Promiscuous and All Multicast modes */
+	mac_ctrl_data = AT_READ_REG(hw, REG_MAC_CTRL);
+
+	if (netdev->flags & IFF_PROMISC) {
+		mac_ctrl_data |= MAC_CTRL_PROMIS_EN;
+	} else if (netdev->flags & IFF_ALLMULTI) {
+		mac_ctrl_data |= MAC_CTRL_MC_ALL_EN;
+		mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN;
+	} else {
+		mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
+	}
+
+	AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+
+	/* clear the old settings from the multicast hash table */
+	AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
+	AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
+
+	/* comoute mc addresses' hash value ,and put it into hash table */
+	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+		hash_value = atl1e_hash_mc_addr(hw, mc_ptr->dmi_addr);
+		atl1e_hash_set(hw, hash_value);
+	}
+}
+
+static void atl1e_vlan_rx_register(struct net_device *netdev,
+				   struct vlan_group *grp)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
+	u32 mac_ctrl_data = 0;
+
+	dev_dbg(&pdev->dev, "atl1e_vlan_rx_register\n");
+
+	atl1e_irq_disable(adapter);
+
+	adapter->vlgrp = grp;
+	mac_ctrl_data = AT_READ_REG(&adapter->hw, REG_MAC_CTRL);
+
+	if (grp) {
+		/* enable VLAN tag insert/strip */
+		mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
+	} else {
+		/* disable VLAN tag insert/strip */
+		mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN;
+	}
+
+	AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data);
+	atl1e_irq_enable(adapter);
+}
+
+static void atl1e_restore_vlan(struct atl1e_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+
+	dev_dbg(&pdev->dev, "atl1e_restore_vlan !");
+	atl1e_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+}
+/*
+ * atl1e_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atl1e_set_mac_addr(struct net_device *netdev, void *p)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+
+	atl1e_hw_set_mac_addr(&adapter->hw);
+
+	return 0;
+}
+
+/*
+ * atl1e_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atl1e_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	int old_mtu   = netdev->mtu;
+	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+
+	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+			(max_frame > MAX_JUMBO_FRAME_SIZE)) {
+		dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
+		return -EINVAL;
+	}
+	/* set MTU */
+	if (old_mtu != new_mtu && netif_running(netdev)) {
+		while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+			msleep(1);
+		netdev->mtu = new_mtu;
+		adapter->hw.max_frame_size = new_mtu;
+		adapter->hw.rx_jumbo_th = (max_frame + 7) >> 3;
+		atl1e_down(adapter);
+		atl1e_up(adapter);
+		clear_bit(__AT_RESETTING, &adapter->flags);
+	}
+	return 0;
+}
+
+/*
+ *  caller should hold mdio_lock
+ */
+static int atl1e_mdio_read(struct net_device *netdev, int phy_id, int reg_num)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	u16 result;
+
+	atl1e_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result);
+	return result;
+}
+
+static void atl1e_mdio_write(struct net_device *netdev, int phy_id,
+			     int reg_num, int val)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+	atl1e_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val);
+}
+
+/*
+ * atl1e_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ */
+static int atl1e_mii_ioctl(struct net_device *netdev,
+			   struct ifreq *ifr, int cmd)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
+	struct mii_ioctl_data *data = if_mii(ifr);
+	unsigned long flags;
+	int retval = 0;
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	spin_lock_irqsave(&adapter->mdio_lock, flags);
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = 0;
+		break;
+
+	case SIOCGMIIREG:
+		if (!capable(CAP_NET_ADMIN)) {
+			retval = -EPERM;
+			goto out;
+		}
+		if (atl1e_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+				    &data->val_out)) {
+			retval = -EIO;
+			goto out;
+		}
+		break;
+
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN)) {
+			retval = -EPERM;
+			goto out;
+		}
+		if (data->reg_num & ~(0x1F)) {
+			retval = -EFAULT;
+			goto out;
+		}
+
+		dev_dbg(&pdev->dev, "<atl1e_mii_ioctl> write %x %x",
+				data->reg_num, data->val_in);
+		if (atl1e_write_phy_reg(&adapter->hw,
+				     data->reg_num, data->val_in)) {
+			retval = -EIO;
+			goto out;
+		}
+		break;
+
+	default:
+		retval = -EOPNOTSUPP;
+		break;
+	}
+out:
+	spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+	return retval;
+
+}
+
+/*
+ * atl1e_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ */
+static int atl1e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		return atl1e_mii_ioctl(netdev, ifr, cmd);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void atl1e_setup_pcicmd(struct pci_dev *pdev)
+{
+	u16 cmd;
+
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	cmd &= ~(PCI_COMMAND_INTX_DISABLE | PCI_COMMAND_IO);
+	cmd |=  (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
+
+	/*
+	 * some motherboards BIOS(PXE/EFI) driver may set PME
+	 * while they transfer control to OS (Windows/Linux)
+	 * so we should clear this bit before NIC work normally
+	 */
+	pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0);
+	msleep(1);
+}
+
+/*
+ * atl1e_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ */
+static int __devinit atl1e_alloc_queues(struct atl1e_adapter *adapter)
+{
+	return 0;
+}
+
+/*
+ * atl1e_sw_init - Initialize general software structures (struct atl1e_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * atl1e_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ */
+static int __devinit atl1e_sw_init(struct atl1e_adapter *adapter)
+{
+	struct atl1e_hw *hw   = &adapter->hw;
+	struct pci_dev	*pdev = adapter->pdev;
+	u32 phy_status_data = 0;
+
+	adapter->wol = 0;
+	adapter->link_speed = SPEED_0;   /* hardware init */
+	adapter->link_duplex = FULL_DUPLEX;
+	adapter->num_rx_queues = 1;
+
+	/* PCI config space info */
+	hw->vendor_id = pdev->vendor;
+	hw->device_id = pdev->device;
+	hw->subsystem_vendor_id = pdev->subsystem_vendor;
+	hw->subsystem_id = pdev->subsystem_device;
+
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+	pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+	phy_status_data = AT_READ_REG(hw, REG_PHY_STATUS);
+	/* nic type */
+	if (hw->revision_id >= 0xF0) {
+		hw->nic_type = athr_l2e_revB;
+	} else {
+		if (phy_status_data & PHY_STATUS_100M)
+			hw->nic_type = athr_l1e;
+		else
+			hw->nic_type = athr_l2e_revA;
+	}
+
+	phy_status_data = AT_READ_REG(hw, REG_PHY_STATUS);
+
+	if (phy_status_data & PHY_STATUS_EMI_CA)
+		hw->emi_ca = true;
+	else
+		hw->emi_ca = false;
+
+	hw->phy_configured = false;
+	hw->preamble_len = 7;
+	hw->max_frame_size = adapter->netdev->mtu;
+	hw->rx_jumbo_th = (hw->max_frame_size + ETH_HLEN +
+				VLAN_HLEN + ETH_FCS_LEN + 7) >> 3;
+
+	hw->rrs_type = atl1e_rrs_disable;
+	hw->indirect_tab = 0;
+	hw->base_cpu = 0;
+
+	/* need confirm */
+
+	hw->ict = 50000;                 /* 100ms */
+	hw->smb_timer = 200000;          /* 200ms  */
+	hw->tpd_burst = 5;
+	hw->rrd_thresh = 1;
+	hw->tpd_thresh = adapter->tx_ring.count / 2;
+	hw->rx_count_down = 4;  /* 2us resolution */
+	hw->tx_count_down = hw->imt * 4 / 3;
+	hw->dmar_block = atl1e_dma_req_1024;
+	hw->dmaw_block = atl1e_dma_req_1024;
+	hw->dmar_dly_cnt = 15;
+	hw->dmaw_dly_cnt = 4;
+
+	if (atl1e_alloc_queues(adapter)) {
+		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+		return -ENOMEM;
+	}
+
+	atomic_set(&adapter->irq_sem, 1);
+	spin_lock_init(&adapter->mdio_lock);
+	spin_lock_init(&adapter->tx_lock);
+
+	set_bit(__AT_DOWN, &adapter->flags);
+
+	return 0;
+}
+
+/*
+ * atl1e_clean_tx_ring - Free Tx-skb
+ * @adapter: board private structure
+ */
+static void atl1e_clean_tx_ring(struct atl1e_adapter *adapter)
+{
+	struct atl1e_tx_ring *tx_ring = (struct atl1e_tx_ring *)
+				&adapter->tx_ring;
+	struct atl1e_tx_buffer *tx_buffer = NULL;
+	struct pci_dev *pdev = adapter->pdev;
+	u16 index, ring_count;
+
+	if (tx_ring->desc == NULL || tx_ring->tx_buffer == NULL)
+		return;
+
+	ring_count = tx_ring->count;
+	/* first unmmap dma */
+	for (index = 0; index < ring_count; index++) {
+		tx_buffer = &tx_ring->tx_buffer[index];
+		if (tx_buffer->dma) {
+			pci_unmap_page(pdev, tx_buffer->dma,
+					tx_buffer->length, PCI_DMA_TODEVICE);
+			tx_buffer->dma = 0;
+		}
+	}
+	/* second free skb */
+	for (index = 0; index < ring_count; index++) {
+		tx_buffer = &tx_ring->tx_buffer[index];
+		if (tx_buffer->skb) {
+			dev_kfree_skb_any(tx_buffer->skb);
+			tx_buffer->skb = NULL;
+		}
+	}
+	/* Zero out Tx-buffers */
+	memset(tx_ring->desc, 0, sizeof(struct atl1e_tpd_desc) *
+				ring_count);
+	memset(tx_ring->tx_buffer, 0, sizeof(struct atl1e_tx_buffer) *
+				ring_count);
+}
+
+/*
+ * atl1e_clean_rx_ring - Free rx-reservation skbs
+ * @adapter: board private structure
+ */
+static void atl1e_clean_rx_ring(struct atl1e_adapter *adapter)
+{
+	struct atl1e_rx_ring *rx_ring =
+		(struct atl1e_rx_ring *)&adapter->rx_ring;
+	struct atl1e_rx_page_desc *rx_page_desc = rx_ring->rx_page_desc;
+	u16 i, j;
+
+
+	if (adapter->ring_vir_addr == NULL)
+		return;
+	/* Zero out the descriptor ring */
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+			if (rx_page_desc[i].rx_page[j].addr != NULL) {
+				memset(rx_page_desc[i].rx_page[j].addr, 0,
+						rx_ring->real_page_size);
+			}
+		}
+	}
+}
+
+static void atl1e_cal_ring_size(struct atl1e_adapter *adapter, u32 *ring_size)
+{
+	*ring_size = ((u32)(adapter->tx_ring.count *
+		     sizeof(struct atl1e_tpd_desc) + 7
+			/* tx ring, qword align */
+		     + adapter->rx_ring.real_page_size * AT_PAGE_NUM_PER_QUEUE *
+			adapter->num_rx_queues + 31
+			/* rx ring,  32 bytes align */
+		     + (1 + AT_PAGE_NUM_PER_QUEUE * adapter->num_rx_queues) *
+			sizeof(u32) + 3));
+			/* tx, rx cmd, dword align   */
+}
+
+static void atl1e_init_ring_resources(struct atl1e_adapter *adapter)
+{
+	struct atl1e_tx_ring *tx_ring = NULL;
+	struct atl1e_rx_ring *rx_ring = NULL;
+
+	tx_ring = &adapter->tx_ring;
+	rx_ring = &adapter->rx_ring;
+
+	rx_ring->real_page_size = adapter->rx_ring.page_size
+				 + adapter->hw.max_frame_size
+				 + ETH_HLEN + VLAN_HLEN
+				 + ETH_FCS_LEN;
+	rx_ring->real_page_size = roundup(rx_ring->real_page_size, 32);
+	atl1e_cal_ring_size(adapter, &adapter->ring_size);
+
+	adapter->ring_vir_addr = NULL;
+	adapter->rx_ring.desc = NULL;
+	rwlock_init(&adapter->tx_ring.tx_lock);
+
+	return;
+}
+
+/*
+ * Read / Write Ptr Initialize:
+ */
+static void atl1e_init_ring_ptrs(struct atl1e_adapter *adapter)
+{
+	struct atl1e_tx_ring *tx_ring = NULL;
+	struct atl1e_rx_ring *rx_ring = NULL;
+	struct atl1e_rx_page_desc *rx_page_desc = NULL;
+	int i, j;
+
+	tx_ring = &adapter->tx_ring;
+	rx_ring = &adapter->rx_ring;
+	rx_page_desc = rx_ring->rx_page_desc;
+
+	tx_ring->next_to_use = 0;
+	atomic_set(&tx_ring->next_to_clean, 0);
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		rx_page_desc[i].rx_using  = 0;
+		rx_page_desc[i].rx_nxseq = 0;
+		for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+			*rx_page_desc[i].rx_page[j].write_offset_addr = 0;
+			rx_page_desc[i].rx_page[j].read_offset = 0;
+		}
+	}
+}
+
+/*
+ * atl1e_free_ring_resources - Free Tx / RX descriptor Resources
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ */
+static void atl1e_free_ring_resources(struct atl1e_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+
+	atl1e_clean_tx_ring(adapter);
+	atl1e_clean_rx_ring(adapter);
+
+	if (adapter->ring_vir_addr) {
+		pci_free_consistent(pdev, adapter->ring_size,
+				adapter->ring_vir_addr, adapter->ring_dma);
+		adapter->ring_vir_addr = NULL;
+	}
+
+	if (adapter->tx_ring.tx_buffer) {
+		kfree(adapter->tx_ring.tx_buffer);
+		adapter->tx_ring.tx_buffer = NULL;
+	}
+}
+
+/*
+ * atl1e_setup_mem_resources - allocate Tx / RX descriptor resources
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ */
+static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct atl1e_tx_ring *tx_ring;
+	struct atl1e_rx_ring *rx_ring;
+	struct atl1e_rx_page_desc  *rx_page_desc;
+	int size, i, j;
+	u32 offset = 0;
+	int err = 0;
+
+	if (adapter->ring_vir_addr != NULL)
+		return 0; /* alloced already */
+
+	tx_ring = &adapter->tx_ring;
+	rx_ring = &adapter->rx_ring;
+
+	/* real ring DMA buffer */
+
+	size = adapter->ring_size;
+	adapter->ring_vir_addr = pci_alloc_consistent(pdev,
+			adapter->ring_size, &adapter->ring_dma);
+
+	if (adapter->ring_vir_addr == NULL) {
+		dev_err(&pdev->dev, "pci_alloc_consistent failed, "
+				    "size = D%d", size);
+		return -ENOMEM;
+	}
+
+	memset(adapter->ring_vir_addr, 0, adapter->ring_size);
+
+	rx_page_desc = rx_ring->rx_page_desc;
+
+	/* Init TPD Ring */
+	tx_ring->dma = roundup(adapter->ring_dma, 8);
+	offset = tx_ring->dma - adapter->ring_dma;
+	tx_ring->desc = (struct atl1e_tpd_desc *)
+			(adapter->ring_vir_addr + offset);
+	size = sizeof(struct atl1e_tx_buffer) * (tx_ring->count);
+	tx_ring->tx_buffer = kzalloc(size, GFP_KERNEL);
+	if (tx_ring->tx_buffer == NULL) {
+		dev_err(&pdev->dev, "kzalloc failed , size = D%d", size);
+		err = -ENOMEM;
+		goto failed;
+	}
+
+	/* Init RXF-Pages */
+	offset += (sizeof(struct atl1e_tpd_desc) * tx_ring->count);
+	offset = roundup(offset, 32);
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+			rx_page_desc[i].rx_page[j].dma =
+				adapter->ring_dma + offset;
+			rx_page_desc[i].rx_page[j].addr =
+				adapter->ring_vir_addr + offset;
+			offset += rx_ring->real_page_size;
+		}
+	}
+
+	/* Init CMB dma address */
+	tx_ring->cmb_dma = adapter->ring_dma + offset;
+	tx_ring->cmb     = (u32 *)(adapter->ring_vir_addr + offset);
+	offset += sizeof(u32);
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+			rx_page_desc[i].rx_page[j].write_offset_dma =
+				adapter->ring_dma + offset;
+			rx_page_desc[i].rx_page[j].write_offset_addr =
+				adapter->ring_vir_addr + offset;
+			offset += sizeof(u32);
+		}
+	}
+
+	if (unlikely(offset > adapter->ring_size)) {
+		dev_err(&pdev->dev, "offset(%d) > ring size(%d) !!\n",
+				offset, adapter->ring_size);
+		err = -1;
+		goto failed;
+	}
+
+	return 0;
+failed:
+	if (adapter->ring_vir_addr != NULL) {
+		pci_free_consistent(pdev, adapter->ring_size,
+				adapter->ring_vir_addr, adapter->ring_dma);
+		adapter->ring_vir_addr = NULL;
+	}
+	return err;
+}
+
+static inline void atl1e_configure_des_ring(const struct atl1e_adapter *adapter)
+{
+
+	struct atl1e_hw *hw = (struct atl1e_hw *)&adapter->hw;
+	struct atl1e_rx_ring *rx_ring =
+			(struct atl1e_rx_ring *)&adapter->rx_ring;
+	struct atl1e_tx_ring *tx_ring =
+			(struct atl1e_tx_ring *)&adapter->tx_ring;
+	struct atl1e_rx_page_desc *rx_page_desc = NULL;
+	int i, j;
+
+	AT_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI,
+			(u32)((adapter->ring_dma & AT_DMA_HI_ADDR_MASK) >> 32));
+	AT_WRITE_REG(hw, REG_TPD_BASE_ADDR_LO,
+			(u32)((tx_ring->dma) & AT_DMA_LO_ADDR_MASK));
+	AT_WRITE_REG(hw, REG_TPD_RING_SIZE, (u16)(tx_ring->count));
+	AT_WRITE_REG(hw, REG_HOST_TX_CMB_LO,
+			(u32)((tx_ring->cmb_dma) & AT_DMA_LO_ADDR_MASK));
+
+	rx_page_desc = rx_ring->rx_page_desc;
+	/* RXF Page Physical address / Page Length */
+	for (i = 0; i < AT_MAX_RECEIVE_QUEUE; i++) {
+		AT_WRITE_REG(hw, atl1e_rx_page_hi_addr_regs[i],
+				 (u32)((adapter->ring_dma &
+				 AT_DMA_HI_ADDR_MASK) >> 32));
+		for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) {
+			u32 page_phy_addr;
+			u32 offset_phy_addr;
+
+			page_phy_addr = rx_page_desc[i].rx_page[j].dma;
+			offset_phy_addr =
+				   rx_page_desc[i].rx_page[j].write_offset_dma;
+
+			AT_WRITE_REG(hw, atl1e_rx_page_lo_addr_regs[i][j],
+					page_phy_addr & AT_DMA_LO_ADDR_MASK);
+			AT_WRITE_REG(hw, atl1e_rx_page_write_offset_regs[i][j],
+					offset_phy_addr & AT_DMA_LO_ADDR_MASK);
+			AT_WRITE_REGB(hw, atl1e_rx_page_vld_regs[i][j], 1);
+		}
+	}
+	/* Page Length */
+	AT_WRITE_REG(hw, REG_HOST_RXFPAGE_SIZE, rx_ring->page_size);
+	/* Load all of base address above */
+	AT_WRITE_REG(hw, REG_LOAD_PTR, 1);
+
+	return;
+}
+
+static inline void atl1e_configure_tx(struct atl1e_adapter *adapter)
+{
+	struct atl1e_hw *hw = (struct atl1e_hw *)&adapter->hw;
+	u32 dev_ctrl_data = 0;
+	u32 max_pay_load = 0;
+	u32 jumbo_thresh = 0;
+	u32 extra_size = 0;     /* Jumbo frame threshold in QWORD unit */
+
+	/* configure TXQ param */
+	if (hw->nic_type != athr_l2e_revB) {
+		extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN;
+		if (hw->max_frame_size <= 1500) {
+			jumbo_thresh = hw->max_frame_size + extra_size;
+		} else if (hw->max_frame_size < 6*1024) {
+			jumbo_thresh =
+				(hw->max_frame_size + extra_size) * 2 / 3;
+		} else {
+			jumbo_thresh = (hw->max_frame_size + extra_size) / 2;
+		}
+		AT_WRITE_REG(hw, REG_TX_EARLY_TH, (jumbo_thresh + 7) >> 3);
+	}
+
+	dev_ctrl_data = AT_READ_REG(hw, REG_DEVICE_CTRL);
+
+	max_pay_load  = ((dev_ctrl_data >> DEVICE_CTRL_MAX_PAYLOAD_SHIFT)) &
+			DEVICE_CTRL_MAX_PAYLOAD_MASK;
+
+	hw->dmaw_block = min(max_pay_load, hw->dmaw_block);
+
+	max_pay_load  = ((dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT)) &
+			DEVICE_CTRL_MAX_RREQ_SZ_MASK;
+	hw->dmar_block = min(max_pay_load, hw->dmar_block);
+
+	if (hw->nic_type != athr_l2e_revB)
+		AT_WRITE_REGW(hw, REG_TXQ_CTRL + 2,
+			      atl1e_pay_load_size[hw->dmar_block]);
+	/* enable TXQ */
+	AT_WRITE_REGW(hw, REG_TXQ_CTRL,
+			(((u16)hw->tpd_burst & TXQ_CTRL_NUM_TPD_BURST_MASK)
+			 << TXQ_CTRL_NUM_TPD_BURST_SHIFT)
+			| TXQ_CTRL_ENH_MODE | TXQ_CTRL_EN);
+	return;
+}
+
+static inline void atl1e_configure_rx(struct atl1e_adapter *adapter)
+{
+	struct atl1e_hw *hw = (struct atl1e_hw *)&adapter->hw;
+	u32 rxf_len  = 0;
+	u32 rxf_low  = 0;
+	u32 rxf_high = 0;
+	u32 rxf_thresh_data = 0;
+	u32 rxq_ctrl_data = 0;
+
+	if (hw->nic_type != athr_l2e_revB) {
+		AT_WRITE_REGW(hw, REG_RXQ_JMBOSZ_RRDTIM,
+			      (u16)((hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) <<
+			      RXQ_JMBOSZ_TH_SHIFT |
+			      (1 & RXQ_JMBO_LKAH_MASK) <<
+			      RXQ_JMBO_LKAH_SHIFT));
+
+		rxf_len  = AT_READ_REG(hw, REG_SRAM_RXF_LEN);
+		rxf_high = rxf_len * 4 / 5;
+		rxf_low  = rxf_len / 5;
+		rxf_thresh_data = ((rxf_high  & RXQ_RXF_PAUSE_TH_HI_MASK)
+				  << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
+				  ((rxf_low & RXQ_RXF_PAUSE_TH_LO_MASK)
+				  << RXQ_RXF_PAUSE_TH_LO_SHIFT);
+
+		AT_WRITE_REG(hw, REG_RXQ_RXF_PAUSE_THRESH, rxf_thresh_data);
+	}
+
+	/* RRS */
+	AT_WRITE_REG(hw, REG_IDT_TABLE, hw->indirect_tab);
+	AT_WRITE_REG(hw, REG_BASE_CPU_NUMBER, hw->base_cpu);
+
+	if (hw->rrs_type & atl1e_rrs_ipv4)
+		rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV4;
+
+	if (hw->rrs_type & atl1e_rrs_ipv4_tcp)
+		rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV4_TCP;
+
+	if (hw->rrs_type & atl1e_rrs_ipv6)
+		rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV6;
+
+	if (hw->rrs_type & atl1e_rrs_ipv6_tcp)
+		rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV6_TCP;
+
+	if (hw->rrs_type != atl1e_rrs_disable)
+		rxq_ctrl_data |=
+			(RXQ_CTRL_HASH_ENABLE | RXQ_CTRL_RSS_MODE_MQUESINT);
+
+	rxq_ctrl_data |= RXQ_CTRL_IPV6_XSUM_VERIFY_EN | RXQ_CTRL_PBA_ALIGN_32 |
+			 RXQ_CTRL_CUT_THRU_EN | RXQ_CTRL_EN;
+
+	AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data);
+	return;
+}
+
+static inline void atl1e_configure_dma(struct atl1e_adapter *adapter)
+{
+	struct atl1e_hw *hw = &adapter->hw;
+	u32 dma_ctrl_data = 0;
+
+	dma_ctrl_data = DMA_CTRL_RXCMB_EN;
+	dma_ctrl_data |= (((u32)hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
+		<< DMA_CTRL_DMAR_BURST_LEN_SHIFT;
+	dma_ctrl_data |= (((u32)hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
+		<< DMA_CTRL_DMAW_BURST_LEN_SHIFT;
+	dma_ctrl_data |= DMA_CTRL_DMAR_REQ_PRI | DMA_CTRL_DMAR_OUT_ORDER;
+	dma_ctrl_data |= (((u32)hw->dmar_dly_cnt) & DMA_CTRL_DMAR_DLY_CNT_MASK)
+		<< DMA_CTRL_DMAR_DLY_CNT_SHIFT;
+	dma_ctrl_data |= (((u32)hw->dmaw_dly_cnt) & DMA_CTRL_DMAW_DLY_CNT_MASK)
+		<< DMA_CTRL_DMAW_DLY_CNT_SHIFT;
+
+	AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data);
+	return;
+}
+
+static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
+{
+	u32 value;
+	struct atl1e_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+
+	/* Config MAC CTRL Register */
+	value = MAC_CTRL_TX_EN |
+		MAC_CTRL_RX_EN ;
+
+	if (FULL_DUPLEX == adapter->link_duplex)
+		value |= MAC_CTRL_DUPLX;
+
+	value |= ((u32)((SPEED_1000 == adapter->link_speed) ?
+			  MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) <<
+			  MAC_CTRL_SPEED_SHIFT);
+	value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
+
+	value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
+	value |= (((u32)adapter->hw.preamble_len &
+		  MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
+
+	if (adapter->vlgrp)
+		value |= MAC_CTRL_RMV_VLAN;
+
+	value |= MAC_CTRL_BC_EN;
+	if (netdev->flags & IFF_PROMISC)
+		value |= MAC_CTRL_PROMIS_EN;
+	if (netdev->flags & IFF_ALLMULTI)
+		value |= MAC_CTRL_MC_ALL_EN;
+
+	AT_WRITE_REG(hw, REG_MAC_CTRL, value);
+}
+
+/*
+ * atl1e_configure - Configure Transmit&Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx /Rx unit of the MAC after a reset.
+ */
+static int atl1e_configure(struct atl1e_adapter *adapter)
+{
+	struct atl1e_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+
+	u32 intr_status_data = 0;
+
+	/* clear interrupt status */
+	AT_WRITE_REG(hw, REG_ISR, ~0);
+
+	/* 1. set MAC Address */
+	atl1e_hw_set_mac_addr(hw);
+
+	/* 2. Init the Multicast HASH table done by set_muti */
+
+	/* 3. Clear any WOL status */
+	AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+
+	/* 4. Descripter Ring BaseMem/Length/Read ptr/Write ptr
+	 *    TPD Ring/SMB/RXF0 Page CMBs, they use the same
+	 *    High 32bits memory */
+	atl1e_configure_des_ring(adapter);
+
+	/* 5. set Interrupt Moderator Timer */
+	AT_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, hw->imt);
+	AT_WRITE_REGW(hw, REG_IRQ_MODU_TIMER2_INIT, hw->imt);
+	AT_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_LED_MODE |
+			MASTER_CTRL_ITIMER_EN | MASTER_CTRL_ITIMER2_EN);
+
+	/* 6. rx/tx threshold to trig interrupt */
+	AT_WRITE_REGW(hw, REG_TRIG_RRD_THRESH, hw->rrd_thresh);
+	AT_WRITE_REGW(hw, REG_TRIG_TPD_THRESH, hw->tpd_thresh);
+	AT_WRITE_REGW(hw, REG_TRIG_RXTIMER, hw->rx_count_down);
+	AT_WRITE_REGW(hw, REG_TRIG_TXTIMER, hw->tx_count_down);
+
+	/* 7. set Interrupt Clear Timer */
+	AT_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, hw->ict);
+
+	/* 8. set MTU */
+	AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN +
+			VLAN_HLEN + ETH_FCS_LEN);
+
+	/* 9. config TXQ early tx threshold */
+	atl1e_configure_tx(adapter);
+
+	/* 10. config RXQ */
+	atl1e_configure_rx(adapter);
+
+	/* 11. config  DMA Engine */
+	atl1e_configure_dma(adapter);
+
+	/* 12. smb timer to trig interrupt */
+	AT_WRITE_REG(hw, REG_SMB_STAT_TIMER, hw->smb_timer);
+
+	intr_status_data = AT_READ_REG(hw, REG_ISR);
+	if (unlikely((intr_status_data & ISR_PHY_LINKDOWN) != 0)) {
+		dev_err(&pdev->dev, "atl1e_configure failed,"
+				"PCIE phy link down\n");
+		return -1;
+	}
+
+	AT_WRITE_REG(hw, REG_ISR, 0x7fffffff);
+	return 0;
+}
+
+/*
+ * atl1e_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ */
+static struct net_device_stats *atl1e_get_stats(struct net_device *netdev)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct atl1e_hw_stats  *hw_stats = &adapter->hw_stats;
+	struct net_device_stats *net_stats = &adapter->net_stats;
+
+	net_stats->rx_packets = hw_stats->rx_ok;
+	net_stats->tx_packets = hw_stats->tx_ok;
+	net_stats->rx_bytes   = hw_stats->rx_byte_cnt;
+	net_stats->tx_bytes   = hw_stats->tx_byte_cnt;
+	net_stats->multicast  = hw_stats->rx_mcast;
+	net_stats->collisions = hw_stats->tx_1_col +
+				hw_stats->tx_2_col * 2 +
+				hw_stats->tx_late_col + hw_stats->tx_abort_col;
+
+	net_stats->rx_errors  = hw_stats->rx_frag + hw_stats->rx_fcs_err +
+				hw_stats->rx_len_err + hw_stats->rx_sz_ov +
+				hw_stats->rx_rrd_ov + hw_stats->rx_align_err;
+	net_stats->rx_fifo_errors   = hw_stats->rx_rxf_ov;
+	net_stats->rx_length_errors = hw_stats->rx_len_err;
+	net_stats->rx_crc_errors    = hw_stats->rx_fcs_err;
+	net_stats->rx_frame_errors  = hw_stats->rx_align_err;
+	net_stats->rx_over_errors   = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov;
+
+	net_stats->rx_missed_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov;
+
+	net_stats->tx_errors = hw_stats->tx_late_col + hw_stats->tx_abort_col +
+			       hw_stats->tx_underrun + hw_stats->tx_trunc;
+	net_stats->tx_fifo_errors    = hw_stats->tx_underrun;
+	net_stats->tx_aborted_errors = hw_stats->tx_abort_col;
+	net_stats->tx_window_errors  = hw_stats->tx_late_col;
+
+	return &adapter->net_stats;
+}
+
+static void atl1e_update_hw_stats(struct atl1e_adapter *adapter)
+{
+	u16 hw_reg_addr = 0;
+	unsigned long *stats_item = NULL;
+
+	/* update rx status */
+	hw_reg_addr = REG_MAC_RX_STATUS_BIN;
+	stats_item  = &adapter->hw_stats.rx_ok;
+	while (hw_reg_addr <= REG_MAC_RX_STATUS_END) {
+		*stats_item += AT_READ_REG(&adapter->hw, hw_reg_addr);
+		stats_item++;
+		hw_reg_addr += 4;
+	}
+	/* update tx status */
+	hw_reg_addr = REG_MAC_TX_STATUS_BIN;
+	stats_item  = &adapter->hw_stats.tx_ok;
+	while (hw_reg_addr <= REG_MAC_TX_STATUS_END) {
+		*stats_item += AT_READ_REG(&adapter->hw, hw_reg_addr);
+		stats_item++;
+		hw_reg_addr += 4;
+	}
+}
+
+static inline void atl1e_clear_phy_int(struct atl1e_adapter *adapter)
+{
+	u16 phy_data;
+
+	spin_lock(&adapter->mdio_lock);
+	atl1e_read_phy_reg(&adapter->hw, MII_INT_STATUS, &phy_data);
+	spin_unlock(&adapter->mdio_lock);
+}
+
+static bool atl1e_clean_tx_irq(struct atl1e_adapter *adapter)
+{
+	struct atl1e_tx_ring *tx_ring = (struct atl1e_tx_ring *)
+					&adapter->tx_ring;
+	struct atl1e_tx_buffer *tx_buffer = NULL;
+	u16 hw_next_to_clean = AT_READ_REGW(&adapter->hw, REG_TPD_CONS_IDX);
+	u16 next_to_clean = atomic_read(&tx_ring->next_to_clean);
+
+	while (next_to_clean != hw_next_to_clean) {
+		tx_buffer = &tx_ring->tx_buffer[next_to_clean];
+		if (tx_buffer->dma) {
+			pci_unmap_page(adapter->pdev, tx_buffer->dma,
+					tx_buffer->length, PCI_DMA_TODEVICE);
+			tx_buffer->dma = 0;
+		}
+
+		if (tx_buffer->skb) {
+			dev_kfree_skb_irq(tx_buffer->skb);
+			tx_buffer->skb = NULL;
+		}
+
+		if (++next_to_clean == tx_ring->count)
+			next_to_clean = 0;
+	}
+
+	atomic_set(&tx_ring->next_to_clean, next_to_clean);
+
+	if (netif_queue_stopped(adapter->netdev) &&
+			netif_carrier_ok(adapter->netdev)) {
+		netif_wake_queue(adapter->netdev);
+	}
+
+	return true;
+}
+
+/*
+ * atl1e_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ * @pt_regs: CPU registers structure
+ */
+static irqreturn_t atl1e_intr(int irq, void *data)
+{
+	struct net_device *netdev  = data;
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
+	struct atl1e_hw *hw = &adapter->hw;
+	int max_ints = AT_MAX_INT_WORK;
+	int handled = IRQ_NONE;
+	u32 status;
+
+	do {
+		status = AT_READ_REG(hw, REG_ISR);
+		if ((status & IMR_NORMAL_MASK) == 0 ||
+				(status & ISR_DIS_INT) != 0) {
+			if (max_ints != AT_MAX_INT_WORK)
+				handled = IRQ_HANDLED;
+			break;
+		}
+		/* link event */
+		if (status & ISR_GPHY)
+			atl1e_clear_phy_int(adapter);
+		/* Ack ISR */
+		AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
+
+		handled = IRQ_HANDLED;
+		/* check if PCIE PHY Link down */
+		if (status & ISR_PHY_LINKDOWN) {
+			dev_err(&pdev->dev,
+				"pcie phy linkdown %x\n", status);
+			if (netif_running(adapter->netdev)) {
+				/* reset MAC */
+				atl1e_irq_reset(adapter);
+				schedule_work(&adapter->reset_task);
+				break;
+			}
+		}
+
+		/* check if DMA read/write error */
+		if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
+			dev_err(&pdev->dev,
+				"PCIE DMA RW error (status = 0x%x)\n",
+				status);
+			atl1e_irq_reset(adapter);
+			schedule_work(&adapter->reset_task);
+			break;
+		}
+
+		if (status & ISR_SMB)
+			atl1e_update_hw_stats(adapter);
+
+		/* link event */
+		if (status & (ISR_GPHY | ISR_MANUAL)) {
+			adapter->net_stats.tx_carrier_errors++;
+			atl1e_link_chg_event(adapter);
+			break;
+		}
+
+		/* transmit event */
+		if (status & ISR_TX_EVENT)
+			atl1e_clean_tx_irq(adapter);
+
+		if (status & ISR_RX_EVENT) {
+			/*
+			 * disable rx interrupts, without
+			 * the synchronize_irq bit
+			 */
+			AT_WRITE_REG(hw, REG_IMR,
+				     IMR_NORMAL_MASK & ~ISR_RX_EVENT);
+			AT_WRITE_FLUSH(hw);
+			if (likely(netif_rx_schedule_prep(netdev,
+				   &adapter->napi)))
+				__netif_rx_schedule(netdev, &adapter->napi);
+		}
+	} while (--max_ints > 0);
+	/* re-enable Interrupt*/
+	AT_WRITE_REG(&adapter->hw, REG_ISR, 0);
+
+	return handled;
+}
+
+static inline void atl1e_rx_checksum(struct atl1e_adapter *adapter,
+		  struct sk_buff *skb, struct atl1e_recv_ret_status *prrs)
+{
+	u8 *packet = (u8 *)(prrs + 1);
+	struct iphdr *iph;
+	u16 head_len = ETH_HLEN;
+	u16 pkt_flags;
+	u16 err_flags;
+
+	skb->ip_summed = CHECKSUM_NONE;
+	pkt_flags = prrs->pkt_flag;
+	err_flags = prrs->err_flag;
+	if (((pkt_flags & RRS_IS_IPV4) || (pkt_flags & RRS_IS_IPV6)) &&
+		((pkt_flags & RRS_IS_TCP) || (pkt_flags & RRS_IS_UDP))) {
+		if (pkt_flags & RRS_IS_IPV4) {
+			if (pkt_flags & RRS_IS_802_3)
+				head_len += 8;
+			iph = (struct iphdr *) (packet + head_len);
+			if (iph->frag_off != 0 && !(pkt_flags & RRS_IS_IP_DF))
+				goto hw_xsum;
+		}
+		if (!(err_flags & (RRS_ERR_IP_CSUM | RRS_ERR_L4_CSUM))) {
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+			return;
+		}
+	}
+
+hw_xsum :
+	return;
+}
+
+static struct atl1e_rx_page *atl1e_get_rx_page(struct atl1e_adapter *adapter,
+					       u8 que)
+{
+	struct atl1e_rx_page_desc *rx_page_desc =
+		(struct atl1e_rx_page_desc *) adapter->rx_ring.rx_page_desc;
+	u8 rx_using = rx_page_desc[que].rx_using;
+
+	return (struct atl1e_rx_page *)&(rx_page_desc[que].rx_page[rx_using]);
+}
+
+static void atl1e_clean_rx_irq(struct atl1e_adapter *adapter, u8 que,
+		   int *work_done, int work_to_do)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct net_device *netdev  = adapter->netdev;
+	struct atl1e_rx_ring *rx_ring = (struct atl1e_rx_ring *)
+					 &adapter->rx_ring;
+	struct atl1e_rx_page_desc *rx_page_desc =
+		(struct atl1e_rx_page_desc *) rx_ring->rx_page_desc;
+	struct sk_buff *skb = NULL;
+	struct atl1e_rx_page *rx_page = atl1e_get_rx_page(adapter, que);
+	u32 packet_size, write_offset;
+	struct atl1e_recv_ret_status *prrs;
+
+	write_offset = *(rx_page->write_offset_addr);
+	if (likely(rx_page->read_offset < write_offset)) {
+		do {
+			if (*work_done >= work_to_do)
+				break;
+			(*work_done)++;
+			/* get new packet's  rrs */
+			prrs = (struct atl1e_recv_ret_status *) (rx_page->addr +
+						 rx_page->read_offset);
+			/* check sequence number */
+			if (prrs->seq_num != rx_page_desc[que].rx_nxseq) {
+				dev_err(&pdev->dev,
+					"rx sequence number"
+					" error (rx=%d) (expect=%d)\n",
+					prrs->seq_num,
+					rx_page_desc[que].rx_nxseq);
+				rx_page_desc[que].rx_nxseq++;
+				/* just for debug use */
+				AT_WRITE_REG(&adapter->hw, REG_DEBUG_DATA0,
+					     (((u32)prrs->seq_num) << 16) |
+					     rx_page_desc[que].rx_nxseq);
+				goto fatal_err;
+			}
+			rx_page_desc[que].rx_nxseq++;
+
+			/* error packet */
+			if (prrs->pkt_flag & RRS_IS_ERR_FRAME) {
+				if (prrs->err_flag & (RRS_ERR_BAD_CRC |
+					RRS_ERR_DRIBBLE | RRS_ERR_CODE |
+					RRS_ERR_TRUNC)) {
+				/* hardware error, discard this packet*/
+					dev_err(&pdev->dev,
+						"rx packet desc error %x\n",
+						*((u32 *)prrs + 1));
+					goto skip_pkt;
+				}
+			}
+
+			packet_size = ((prrs->word1 >> RRS_PKT_SIZE_SHIFT) &
+					RRS_PKT_SIZE_MASK) - 4; /* CRC */
+			skb = netdev_alloc_skb(netdev,
+					       packet_size + NET_IP_ALIGN);
+			if (skb == NULL) {
+				dev_warn(&pdev->dev, "%s: Memory squeeze,"
+					"deferring packet.\n", netdev->name);
+				goto skip_pkt;
+			}
+			skb_reserve(skb, NET_IP_ALIGN);
+			skb->dev = netdev;
+			memcpy(skb->data, (u8 *)(prrs + 1), packet_size);
+			skb_put(skb, packet_size);
+			skb->protocol = eth_type_trans(skb, netdev);
+			atl1e_rx_checksum(adapter, skb, prrs);
+
+			if (unlikely(adapter->vlgrp &&
+				(prrs->pkt_flag & RRS_IS_VLAN_TAG))) {
+				u16 vlan_tag = (prrs->vtag >> 4) |
+					       ((prrs->vtag & 7) << 13) |
+					       ((prrs->vtag & 8) << 9);
+				dev_dbg(&pdev->dev,
+					"RXD VLAN TAG<RRD>=0x%04x\n",
+					prrs->vtag);
+				vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+							 vlan_tag);
+			} else {
+				netif_receive_skb(skb);
+			}
+
+			netdev->last_rx = jiffies;
+skip_pkt:
+	/* skip current packet whether it's ok or not. */
+			rx_page->read_offset +=
+				(((u32)((prrs->word1 >> RRS_PKT_SIZE_SHIFT) &
+				RRS_PKT_SIZE_MASK) +
+				sizeof(struct atl1e_recv_ret_status) + 31) &
+						0xFFFFFFE0);
+
+			if (rx_page->read_offset >= rx_ring->page_size) {
+				/* mark this page clean */
+				u16 reg_addr;
+				u8  rx_using;
+
+				rx_page->read_offset =
+					*(rx_page->write_offset_addr) = 0;
+				rx_using = rx_page_desc[que].rx_using;
+				reg_addr =
+					atl1e_rx_page_vld_regs[que][rx_using];
+				AT_WRITE_REGB(&adapter->hw, reg_addr, 1);
+				rx_page_desc[que].rx_using ^= 1;
+				rx_page = atl1e_get_rx_page(adapter, que);
+			}
+			write_offset = *(rx_page->write_offset_addr);
+		} while (rx_page->read_offset < write_offset);
+	}
+
+	return;
+
+fatal_err:
+	if (!test_bit(__AT_DOWN, &adapter->flags))
+		schedule_work(&adapter->reset_task);
+}
+
+/*
+ * atl1e_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ */
+static int atl1e_clean(struct napi_struct *napi, int budget)
+{
+	struct atl1e_adapter *adapter =
+			container_of(napi, struct atl1e_adapter, napi);
+	struct net_device *netdev  = adapter->netdev;
+	struct pci_dev    *pdev    = adapter->pdev;
+	u32 imr_data;
+	int work_done = 0;
+
+	/* Keep link state information with original netdev */
+	if (!netif_carrier_ok(adapter->netdev))
+		goto quit_polling;
+
+	atl1e_clean_rx_irq(adapter, 0, &work_done, budget);
+
+	/* If no Tx and not enough Rx work done, exit the polling mode */
+	if (work_done < budget) {
+quit_polling:
+		netif_rx_complete(netdev, napi);
+		imr_data = AT_READ_REG(&adapter->hw, REG_IMR);
+		AT_WRITE_REG(&adapter->hw, REG_IMR, imr_data | ISR_RX_EVENT);
+		/* test debug */
+		if (test_bit(__AT_DOWN, &adapter->flags)) {
+			atomic_dec(&adapter->irq_sem);
+			dev_err(&pdev->dev,
+				"atl1e_clean is called when AT_DOWN\n");
+		}
+		/* reenable RX intr */
+		/*atl1e_irq_enable(adapter); */
+
+	}
+	return work_done;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void atl1e_netpoll(struct net_device *netdev)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+	disable_irq(adapter->pdev->irq);
+	atl1e_intr(adapter->pdev->irq, netdev);
+	enable_irq(adapter->pdev->irq);
+}
+#endif
+
+static inline u16 atl1e_tpd_avail(struct atl1e_adapter *adapter)
+{
+	struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+	u16 next_to_use = 0;
+	u16 next_to_clean = 0;
+
+	next_to_clean = atomic_read(&tx_ring->next_to_clean);
+	next_to_use   = tx_ring->next_to_use;
+
+	return (u16)(next_to_clean > next_to_use) ?
+		(next_to_clean - next_to_use - 1) :
+		(tx_ring->count + next_to_clean - next_to_use - 1);
+}
+
+/*
+ * get next usable tpd
+ * Note: should call atl1e_tdp_avail to make sure
+ * there is enough tpd to use
+ */
+static struct atl1e_tpd_desc *atl1e_get_tpd(struct atl1e_adapter *adapter)
+{
+	struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+	u16 next_to_use = 0;
+
+	next_to_use = tx_ring->next_to_use;
+	if (++tx_ring->next_to_use == tx_ring->count)
+		tx_ring->next_to_use = 0;
+
+	memset(&tx_ring->desc[next_to_use], 0, sizeof(struct atl1e_tpd_desc));
+	return (struct atl1e_tpd_desc *)&tx_ring->desc[next_to_use];
+}
+
+static struct atl1e_tx_buffer *
+atl1e_get_tx_buffer(struct atl1e_adapter *adapter, struct atl1e_tpd_desc *tpd)
+{
+	struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+
+	return &tx_ring->tx_buffer[tpd - tx_ring->desc];
+}
+
+/* Calculate the transmit packet descript needed*/
+static u16 atl1e_cal_tdp_req(const struct sk_buff *skb)
+{
+	int i = 0;
+	u16 tpd_req = 1;
+	u16 fg_size = 0;
+	u16 proto_hdr_len = 0;
+
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		fg_size = skb_shinfo(skb)->frags[i].size;
+		tpd_req += ((fg_size + MAX_TX_BUF_LEN - 1) >> MAX_TX_BUF_SHIFT);
+	}
+
+	if (skb_is_gso(skb)) {
+		if (skb->protocol == ntohs(ETH_P_IP) ||
+		   (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6)) {
+			proto_hdr_len = skb_transport_offset(skb) +
+					tcp_hdrlen(skb);
+			if (proto_hdr_len < skb_headlen(skb)) {
+				tpd_req += ((skb_headlen(skb) - proto_hdr_len +
+					   MAX_TX_BUF_LEN - 1) >>
+					   MAX_TX_BUF_SHIFT);
+			}
+		}
+
+	}
+	return tpd_req;
+}
+
+static int atl1e_tso_csum(struct atl1e_adapter *adapter,
+		       struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	u8 hdr_len;
+	u32 real_len;
+	unsigned short offload_type;
+	int err;
+
+	if (skb_is_gso(skb)) {
+		if (skb_header_cloned(skb)) {
+			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+			if (unlikely(err))
+				return -1;
+		}
+		offload_type = skb_shinfo(skb)->gso_type;
+
+		if (offload_type & SKB_GSO_TCPV4) {
+			real_len = (((unsigned char *)ip_hdr(skb) - skb->data)
+					+ ntohs(ip_hdr(skb)->tot_len));
+
+			if (real_len < skb->len)
+				pskb_trim(skb, real_len);
+
+			hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
+			if (unlikely(skb->len == hdr_len)) {
+				/* only xsum need */
+				dev_warn(&pdev->dev,
+				      "IPV4 tso with zero data??\n");
+				goto check_sum;
+			} else {
+				ip_hdr(skb)->check = 0;
+				ip_hdr(skb)->tot_len = 0;
+				tcp_hdr(skb)->check = ~csum_tcpudp_magic(
+							ip_hdr(skb)->saddr,
+							ip_hdr(skb)->daddr,
+							0, IPPROTO_TCP, 0);
+				tpd->word3 |= (ip_hdr(skb)->ihl &
+					TDP_V4_IPHL_MASK) <<
+					TPD_V4_IPHL_SHIFT;
+				tpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
+					TPD_TCPHDRLEN_MASK) <<
+					TPD_TCPHDRLEN_SHIFT;
+				tpd->word3 |= ((skb_shinfo(skb)->gso_size) &
+					TPD_MSS_MASK) << TPD_MSS_SHIFT;
+				tpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
+			}
+			return 0;
+		}
+
+		if (offload_type & SKB_GSO_TCPV6) {
+			real_len = (((unsigned char *)ipv6_hdr(skb) - skb->data)
+					+ ntohs(ipv6_hdr(skb)->payload_len));
+			if (real_len < skb->len)
+				pskb_trim(skb, real_len);
+
+			/* check payload == 0 byte ? */
+			hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
+			if (unlikely(skb->len == hdr_len)) {
+				/* only xsum need */
+				dev_warn(&pdev->dev,
+					"IPV6 tso with zero data??\n");
+				goto check_sum;
+			} else {
+				tcp_hdr(skb)->check = ~csum_ipv6_magic(
+						&ipv6_hdr(skb)->saddr,
+						&ipv6_hdr(skb)->daddr,
+						0, IPPROTO_TCP, 0);
+				tpd->word3 |= 1 << TPD_IP_VERSION_SHIFT;
+				hdr_len >>= 1;
+				tpd->word3 |= (hdr_len & TPD_V6_IPHLLO_MASK) <<
+					TPD_V6_IPHLLO_SHIFT;
+				tpd->word3 |= ((hdr_len >> 3) &
+					TPD_V6_IPHLHI_MASK) <<
+					TPD_V6_IPHLHI_SHIFT;
+				tpd->word3 |= (tcp_hdrlen(skb) >> 2 &
+					TPD_TCPHDRLEN_MASK) <<
+					TPD_TCPHDRLEN_SHIFT;
+				tpd->word3 |= ((skb_shinfo(skb)->gso_size) &
+					TPD_MSS_MASK) << TPD_MSS_SHIFT;
+					tpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
+			}
+		}
+		return 0;
+	}
+
+check_sum:
+	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
+		u8 css, cso;
+
+		cso = skb_transport_offset(skb);
+		if (unlikely(cso & 0x1)) {
+			dev_err(&adapter->pdev->dev,
+			   "pay load offset should not ant event number\n");
+			return -1;
+		} else {
+			css = cso + skb->csum_offset;
+			tpd->word3 |= (cso & TPD_PLOADOFFSET_MASK) <<
+					TPD_PLOADOFFSET_SHIFT;
+			tpd->word3 |= (css & TPD_CCSUMOFFSET_MASK) <<
+					TPD_CCSUMOFFSET_SHIFT;
+			tpd->word3 |= 1 << TPD_CC_SEGMENT_EN_SHIFT;
+		}
+	}
+
+	return 0;
+}
+
+static void atl1e_tx_map(struct atl1e_adapter *adapter,
+		      struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
+{
+	struct atl1e_tpd_desc *use_tpd = NULL;
+	struct atl1e_tx_buffer *tx_buffer = NULL;
+	u16 buf_len = skb->len - skb->data_len;
+	u16 map_len = 0;
+	u16 mapped_len = 0;
+	u16 hdr_len = 0;
+	u16 nr_frags;
+	u16 f;
+	int segment;
+
+	nr_frags = skb_shinfo(skb)->nr_frags;
+	segment = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
+	if (segment) {
+		/* TSO */
+		map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+		use_tpd = tpd;
+
+		tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd);
+		tx_buffer->length = map_len;
+		tx_buffer->dma = pci_map_single(adapter->pdev,
+					skb->data, hdr_len, PCI_DMA_TODEVICE);
+		mapped_len += map_len;
+		use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
+		use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
+			((cpu_to_le32(tx_buffer->length) &
+			TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT);
+	}
+
+	while (mapped_len < buf_len) {
+		/* mapped_len == 0, means we should use the first tpd,
+		   which is given by caller  */
+		if (mapped_len == 0) {
+			use_tpd = tpd;
+		} else {
+			use_tpd = atl1e_get_tpd(adapter);
+			memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc));
+		}
+		tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd);
+		tx_buffer->skb = NULL;
+
+		tx_buffer->length = map_len =
+			((buf_len - mapped_len) >= MAX_TX_BUF_LEN) ?
+			MAX_TX_BUF_LEN : (buf_len - mapped_len);
+		tx_buffer->dma =
+			pci_map_single(adapter->pdev, skb->data + mapped_len,
+					map_len, PCI_DMA_TODEVICE);
+		mapped_len  += map_len;
+		use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
+		use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
+			((cpu_to_le32(tx_buffer->length) &
+			TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT);
+	}
+
+	for (f = 0; f < nr_frags; f++) {
+		struct skb_frag_struct *frag;
+		u16 i;
+		u16 seg_num;
+
+		frag = &skb_shinfo(skb)->frags[f];
+		buf_len = frag->size;
+
+		seg_num = (buf_len + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
+		for (i = 0; i < seg_num; i++) {
+			use_tpd = atl1e_get_tpd(adapter);
+			memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc));
+
+			tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd);
+			if (tx_buffer->skb)
+				BUG();
+
+			tx_buffer->skb = NULL;
+			tx_buffer->length =
+				(buf_len > MAX_TX_BUF_LEN) ?
+				MAX_TX_BUF_LEN : buf_len;
+			buf_len -= tx_buffer->length;
+
+			tx_buffer->dma =
+				pci_map_page(adapter->pdev, frag->page,
+						frag->page_offset +
+						(i * MAX_TX_BUF_LEN),
+						tx_buffer->length,
+						PCI_DMA_TODEVICE);
+			use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
+			use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
+					((cpu_to_le32(tx_buffer->length) &
+					TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT);
+		}
+	}
+
+	if ((tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK)
+		/* note this one is a tcp header */
+		tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT;
+	/* The last tpd */
+
+	use_tpd->word3 |= 1 << TPD_EOP_SHIFT;
+	/* The last buffer info contain the skb address,
+	   so it will be free after unmap */
+	tx_buffer->skb = skb;
+}
+
+static void atl1e_tx_queue(struct atl1e_adapter *adapter, u16 count,
+			   struct atl1e_tpd_desc *tpd)
+{
+	struct atl1e_tx_ring *tx_ring = &adapter->tx_ring;
+	/* Force memory writes to complete before letting h/w
+	 * know there are new descriptors to fetch.  (Only
+	 * applicable for weak-ordered memory model archs,
+	 * such as IA-64). */
+	wmb();
+	AT_WRITE_REG(&adapter->hw, REG_MB_TPD_PROD_IDX, tx_ring->next_to_use);
+}
+
+static int atl1e_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	unsigned long flags;
+	u16 tpd_req = 1;
+	struct atl1e_tpd_desc *tpd;
+
+	if (test_bit(__AT_DOWN, &adapter->flags)) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	if (unlikely(skb->len <= 0)) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+	tpd_req = atl1e_cal_tdp_req(skb);
+	if (!spin_trylock_irqsave(&adapter->tx_lock, flags))
+		return NETDEV_TX_LOCKED;
+
+	if (atl1e_tpd_avail(adapter) < tpd_req) {
+		/* no enough descriptor, just stop queue */
+		netif_stop_queue(netdev);
+		spin_unlock_irqrestore(&adapter->tx_lock, flags);
+		return NETDEV_TX_BUSY;
+	}
+
+	tpd = atl1e_get_tpd(adapter);
+
+	if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+		u16 vlan_tag = vlan_tx_tag_get(skb);
+		u16 atl1e_vlan_tag;
+
+		tpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT;
+		AT_VLAN_TAG_TO_TPD_TAG(vlan_tag, atl1e_vlan_tag);
+		tpd->word2 |= (atl1e_vlan_tag & TPD_VLANTAG_MASK) <<
+				TPD_VLAN_SHIFT;
+	}
+
+	if (skb->protocol == ntohs(ETH_P_8021Q))
+		tpd->word3 |= 1 << TPD_VL_TAGGED_SHIFT;
+
+	if (skb_network_offset(skb) != ETH_HLEN)
+		tpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; /* 802.3 frame */
+
+	/* do TSO and check sum */
+	if (atl1e_tso_csum(adapter, skb, tpd) != 0) {
+		spin_unlock_irqrestore(&adapter->tx_lock, flags);
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	atl1e_tx_map(adapter, skb, tpd);
+	atl1e_tx_queue(adapter, tpd_req, tpd);
+
+	netdev->trans_start = jiffies;
+	spin_unlock_irqrestore(&adapter->tx_lock, flags);
+	return NETDEV_TX_OK;
+}
+
+static void atl1e_free_irq(struct atl1e_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	free_irq(adapter->pdev->irq, netdev);
+
+	if (adapter->have_msi)
+		pci_disable_msi(adapter->pdev);
+}
+
+static int atl1e_request_irq(struct atl1e_adapter *adapter)
+{
+	struct pci_dev    *pdev   = adapter->pdev;
+	struct net_device *netdev = adapter->netdev;
+	int flags = 0;
+	int err = 0;
+
+	adapter->have_msi = true;
+	err = pci_enable_msi(adapter->pdev);
+	if (err) {
+		dev_dbg(&pdev->dev,
+			"Unable to allocate MSI interrupt Error: %d\n", err);
+		adapter->have_msi = false;
+	} else
+		netdev->irq = pdev->irq;
+
+
+	if (!adapter->have_msi)
+		flags |= IRQF_SHARED;
+	err = request_irq(adapter->pdev->irq, &atl1e_intr, flags,
+			netdev->name, netdev);
+	if (err) {
+		dev_dbg(&pdev->dev,
+			"Unable to allocate interrupt Error: %d\n", err);
+		if (adapter->have_msi)
+			pci_disable_msi(adapter->pdev);
+		return err;
+	}
+	dev_dbg(&pdev->dev, "atl1e_request_irq OK\n");
+	return err;
+}
+
+int atl1e_up(struct atl1e_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int err = 0;
+	u32 val;
+
+	/* hardware has been reset, we need to reload some things */
+	err = atl1e_init_hw(&adapter->hw);
+	if (err) {
+		err = -EIO;
+		return err;
+	}
+	atl1e_init_ring_ptrs(adapter);
+	atl1e_set_multi(netdev);
+	atl1e_restore_vlan(adapter);
+
+	if (atl1e_configure(adapter)) {
+		err = -EIO;
+		goto err_up;
+	}
+
+	clear_bit(__AT_DOWN, &adapter->flags);
+	napi_enable(&adapter->napi);
+	atl1e_irq_enable(adapter);
+	val = AT_READ_REG(&adapter->hw, REG_MASTER_CTRL);
+	AT_WRITE_REG(&adapter->hw, REG_MASTER_CTRL,
+		      val | MASTER_CTRL_MANUAL_INT);
+
+err_up:
+	return err;
+}
+
+void atl1e_down(struct atl1e_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	/* signal that we're down so the interrupt handler does not
+	 * reschedule our watchdog timer */
+	set_bit(__AT_DOWN, &adapter->flags);
+
+#ifdef NETIF_F_LLTX
+	netif_stop_queue(netdev);
+#else
+	netif_tx_disable(netdev);
+#endif
+
+	/* reset MAC to disable all RX/TX */
+	atl1e_reset_hw(&adapter->hw);
+	msleep(1);
+
+	napi_disable(&adapter->napi);
+	atl1e_del_timer(adapter);
+	atl1e_irq_disable(adapter);
+
+	netif_carrier_off(netdev);
+	adapter->link_speed = SPEED_0;
+	adapter->link_duplex = -1;
+	atl1e_clean_tx_ring(adapter);
+	atl1e_clean_rx_ring(adapter);
+}
+
+/*
+ * atl1e_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ */
+static int atl1e_open(struct net_device *netdev)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	int err;
+
+	/* disallow open during test */
+	if (test_bit(__AT_TESTING, &adapter->flags))
+		return -EBUSY;
+
+	/* allocate rx/tx dma buffer & descriptors */
+	atl1e_init_ring_resources(adapter);
+	err = atl1e_setup_ring_resources(adapter);
+	if (unlikely(err))
+		return err;
+
+	err = atl1e_request_irq(adapter);
+	if (unlikely(err))
+		goto err_req_irq;
+
+	err = atl1e_up(adapter);
+	if (unlikely(err))
+		goto err_up;
+
+	return 0;
+
+err_up:
+	atl1e_free_irq(adapter);
+err_req_irq:
+	atl1e_free_ring_resources(adapter);
+	atl1e_reset_hw(&adapter->hw);
+
+	return err;
+}
+
+/*
+ * atl1e_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ */
+static int atl1e_close(struct net_device *netdev)
+{
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+	WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
+	atl1e_down(adapter);
+	atl1e_free_irq(adapter);
+	atl1e_free_ring_resources(adapter);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	struct atl1e_hw *hw = &adapter->hw;
+	u32 ctrl = 0;
+	u32 mac_ctrl_data = 0;
+	u32 wol_ctrl_data = 0;
+	u16 mii_advertise_data = 0;
+	u16 mii_bmsr_data = 0;
+	u16 mii_intr_status_data = 0;
+	u32 wufc = adapter->wol;
+	u32 i;
+#ifdef CONFIG_PM
+	int retval = 0;
+#endif
+
+	if (netif_running(netdev)) {
+		WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
+		atl1e_down(adapter);
+	}
+	netif_device_detach(netdev);
+
+#ifdef CONFIG_PM
+	retval = pci_save_state(pdev);
+	if (retval)
+		return retval;
+#endif
+
+	if (wufc) {
+		/* get link status */
+		atl1e_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data);
+		atl1e_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data);
+
+		mii_advertise_data = MII_AR_10T_HD_CAPS;
+
+		if ((atl1e_write_phy_reg(hw, MII_AT001_CR, 0) != 0) ||
+		    (atl1e_write_phy_reg(hw,
+			   MII_ADVERTISE, mii_advertise_data) != 0) ||
+		    (atl1e_phy_commit(hw)) != 0) {
+			dev_dbg(&pdev->dev, "set phy register failed\n");
+			goto wol_dis;
+		}
+
+		hw->phy_configured = false; /* re-init PHY when resume */
+
+		/* turn on magic packet wol */
+		if (wufc & AT_WUFC_MAG)
+			wol_ctrl_data |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
+
+		if (wufc & AT_WUFC_LNKC) {
+		/* if orignal link status is link, just wait for retrive link */
+			if (mii_bmsr_data & BMSR_LSTATUS) {
+				for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) {
+					msleep(100);
+					atl1e_read_phy_reg(hw, MII_BMSR,
+							(u16 *)&mii_bmsr_data);
+					if (mii_bmsr_data & BMSR_LSTATUS)
+						break;
+				}
+
+				if ((mii_bmsr_data & BMSR_LSTATUS) == 0)
+					dev_dbg(&pdev->dev,
+						"%s: Link may change"
+						"when suspend\n",
+						atl1e_driver_name);
+			}
+			wol_ctrl_data |=  WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN;
+			/* only link up can wake up */
+			if (atl1e_write_phy_reg(hw, MII_INT_CTRL, 0x400) != 0) {
+				dev_dbg(&pdev->dev, "%s: read write phy "
+						  "register failed.\n",
+						  atl1e_driver_name);
+				goto wol_dis;
+			}
+		}
+		/* clear phy interrupt */
+		atl1e_read_phy_reg(hw, MII_INT_STATUS, &mii_intr_status_data);
+		/* Config MAC Ctrl register */
+		mac_ctrl_data = MAC_CTRL_RX_EN;
+		/* set to 10/100M halt duplex */
+		mac_ctrl_data |= MAC_CTRL_SPEED_10_100 << MAC_CTRL_SPEED_SHIFT;
+		mac_ctrl_data |= (((u32)adapter->hw.preamble_len &
+				 MAC_CTRL_PRMLEN_MASK) <<
+				 MAC_CTRL_PRMLEN_SHIFT);
+
+		if (adapter->vlgrp)
+			mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
+
+		/* magic packet maybe Broadcast&multicast&Unicast frame */
+		if (wufc & AT_WUFC_MAG)
+			mac_ctrl_data |= MAC_CTRL_BC_EN;
+
+		dev_dbg(&pdev->dev,
+			"%s: suspend MAC=0x%x\n",
+			atl1e_driver_name, mac_ctrl_data);
+
+		AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
+		AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+		/* pcie patch */
+		ctrl = AT_READ_REG(hw, REG_PCIE_PHYMISC);
+		ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+		AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+		goto suspend_exit;
+	}
+wol_dis:
+
+	/* WOL disabled */
+	AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+
+	/* pcie patch */
+	ctrl = AT_READ_REG(hw, REG_PCIE_PHYMISC);
+	ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+	AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+
+	atl1e_force_ps(hw);
+	hw->phy_configured = false; /* re-init PHY when resume */
+
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+
+suspend_exit:
+
+	if (netif_running(netdev))
+		atl1e_free_irq(adapter);
+
+	pci_disable_device(pdev);
+
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int atl1e_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+	u32 err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "ATL1e: Cannot enable PCI"
+				" device from suspend\n");
+		return err;
+	}
+
+	pci_set_master(pdev);
+
+	AT_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */
+
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+	pci_enable_wake(pdev, PCI_D3cold, 0);
+
+	AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
+
+	if (netif_running(netdev))
+		err = atl1e_request_irq(adapter);
+		if (err)
+			return err;
+
+	atl1e_reset_hw(&adapter->hw);
+
+	if (netif_running(netdev))
+		atl1e_up(adapter);
+
+	netif_device_attach(netdev);
+
+	return 0;
+}
+#endif
+
+static void atl1e_shutdown(struct pci_dev *pdev)
+{
+	atl1e_suspend(pdev, PMSG_SUSPEND);
+}
+
+static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev)
+{
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+	pci_set_drvdata(pdev, netdev);
+
+	netdev->irq  = pdev->irq;
+	netdev->open = &atl1e_open;
+	netdev->stop = &atl1e_close;
+	netdev->hard_start_xmit = &atl1e_xmit_frame;
+	netdev->get_stats = &atl1e_get_stats;
+	netdev->set_multicast_list = &atl1e_set_multi;
+	netdev->set_mac_address = &atl1e_set_mac_addr;
+	netdev->change_mtu = &atl1e_change_mtu;
+	netdev->do_ioctl = &atl1e_ioctl;
+	netdev->tx_timeout = &atl1e_tx_timeout;
+	netdev->watchdog_timeo = AT_TX_WATCHDOG;
+	netdev->vlan_rx_register = atl1e_vlan_rx_register;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	netdev->poll_controller = atl1e_netpoll;
+#endif
+	atl1e_set_ethtool_ops(netdev);
+
+	netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM |
+		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+	netdev->features |= NETIF_F_LLTX;
+	netdev->features |= NETIF_F_TSO;
+	netdev->features |= NETIF_F_TSO6;
+
+	return 0;
+}
+
+/*
+ * atl1e_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in atl1e_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * atl1e_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ */
+static int __devinit atl1e_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *ent)
+{
+	struct net_device *netdev;
+	struct atl1e_adapter *adapter = NULL;
+	static int cards_found;
+
+	int err = 0;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "cannot enable PCI device\n");
+		return err;
+	}
+
+	/*
+	 * The atl1e chip can DMA to 64-bit addresses, but it uses a single
+	 * shared register for the high 32 bits, so only a single, aligned,
+	 * 4 GB physical address range can be used at a time.
+	 *
+	 * Supporting 64-bit DMA on this hardware is more trouble than it's
+	 * worth.  It is far easier to limit to 32-bit DMA than update
+	 * various kernel subsystems to support the mechanics required by a
+	 * fixed-high-32-bit system.
+	 */
+	if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) ||
+	    (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) {
+		dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
+		goto err_dma;
+	}
+
+	err = pci_request_regions(pdev, atl1e_driver_name);
+	if (err) {
+		dev_err(&pdev->dev, "cannot obtain PCI resources\n");
+		goto err_pci_reg;
+	}
+
+	pci_set_master(pdev);
+
+	netdev = alloc_etherdev(sizeof(struct atl1e_adapter));
+	if (netdev == NULL) {
+		err = -ENOMEM;
+		dev_err(&pdev->dev, "etherdev alloc failed\n");
+		goto err_alloc_etherdev;
+	}
+
+	err = atl1e_init_netdev(netdev, pdev);
+	if (err) {
+		dev_err(&pdev->dev, "init netdevice failed\n");
+		goto err_init_netdev;
+	}
+	adapter = netdev_priv(netdev);
+	adapter->bd_number = cards_found;
+	adapter->netdev = netdev;
+	adapter->pdev = pdev;
+	adapter->hw.adapter = adapter;
+	adapter->hw.hw_addr = pci_iomap(pdev, BAR_0, 0);
+	if (!adapter->hw.hw_addr) {
+		err = -EIO;
+		dev_err(&pdev->dev, "cannot map device registers\n");
+		goto err_ioremap;
+	}
+	netdev->base_addr = (unsigned long)adapter->hw.hw_addr;
+
+	/* init mii data */
+	adapter->mii.dev = netdev;
+	adapter->mii.mdio_read  = atl1e_mdio_read;
+	adapter->mii.mdio_write = atl1e_mdio_write;
+	adapter->mii.phy_id_mask = 0x1f;
+	adapter->mii.reg_num_mask = MDIO_REG_ADDR_MASK;
+
+	netif_napi_add(netdev, &adapter->napi, atl1e_clean, 64);
+
+	init_timer(&adapter->phy_config_timer);
+	adapter->phy_config_timer.function = &atl1e_phy_config;
+	adapter->phy_config_timer.data = (unsigned long) adapter;
+
+	/* get user settings */
+	atl1e_check_options(adapter);
+	/*
+	 * Mark all PCI regions associated with PCI device
+	 * pdev as being reserved by owner atl1e_driver_name
+	 * Enables bus-mastering on the device and calls
+	 * pcibios_set_master to do the needed arch specific settings
+	 */
+	atl1e_setup_pcicmd(pdev);
+	/* setup the private structure */
+	err = atl1e_sw_init(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "net device private data init failed\n");
+		goto err_sw_init;
+	}
+
+	/* Init GPHY as early as possible due to power saving issue  */
+	spin_lock(&adapter->mdio_lock);
+	atl1e_phy_init(&adapter->hw);
+	spin_unlock(&adapter->mdio_lock);
+	/* reset the controller to
+	 * put the device in a known good starting state */
+	err = atl1e_reset_hw(&adapter->hw);
+	if (err) {
+		err = -EIO;
+		goto err_reset;
+	}
+
+	if (atl1e_read_mac_addr(&adapter->hw) != 0) {
+		err = -EIO;
+		dev_err(&pdev->dev, "get mac address failed\n");
+		goto err_eeprom;
+	}
+
+	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
+	memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
+	dev_dbg(&pdev->dev, "mac address : %02x-%02x-%02x-%02x-%02x-%02x\n",
+			adapter->hw.mac_addr[0], adapter->hw.mac_addr[1],
+			adapter->hw.mac_addr[2], adapter->hw.mac_addr[3],
+			adapter->hw.mac_addr[4], adapter->hw.mac_addr[5]);
+
+	INIT_WORK(&adapter->reset_task, atl1e_reset_task);
+	INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task);
+	err = register_netdev(netdev);
+	if (err) {
+		dev_err(&pdev->dev, "register netdevice failed\n");
+		goto err_register;
+	}
+
+	/* assume we have no link for now */
+	netif_stop_queue(netdev);
+	netif_carrier_off(netdev);
+
+	cards_found++;
+
+	return 0;
+
+err_reset:
+err_register:
+err_sw_init:
+err_eeprom:
+	iounmap(adapter->hw.hw_addr);
+err_init_netdev:
+err_ioremap:
+	free_netdev(netdev);
+err_alloc_etherdev:
+	pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+	pci_disable_device(pdev);
+	return err;
+}
+
+/*
+ * atl1e_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * atl1e_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.  The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ */
+static void __devexit atl1e_remove(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl1e_adapter *adapter = netdev_priv(netdev);
+
+	/*
+	 * flush_scheduled work may reschedule our watchdog task, so
+	 * explicitly disable watchdog tasks from being rescheduled
+	 */
+	set_bit(__AT_DOWN, &adapter->flags);
+
+	atl1e_del_timer(adapter);
+	atl1e_cancel_work(adapter);
+
+	unregister_netdev(netdev);
+	atl1e_free_ring_resources(adapter);
+	atl1e_force_ps(&adapter->hw);
+	iounmap(adapter->hw.hw_addr);
+	pci_release_regions(pdev);
+	free_netdev(netdev);
+	pci_disable_device(pdev);
+}
+
+/*
+ * atl1e_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t
+atl1e_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl1e_adapter *adapter = netdev->priv;
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev))
+		atl1e_down(adapter);
+
+	pci_disable_device(pdev);
+
+	/* Request a slot slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/*
+ * atl1e_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t atl1e_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl1e_adapter *adapter = netdev->priv;
+
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev,
+		       "ATL1e: Cannot re-enable PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	pci_set_master(pdev);
+
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+	pci_enable_wake(pdev, PCI_D3cold, 0);
+
+	atl1e_reset_hw(&adapter->hw);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/*
+ * atl1e_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the atl1e_resume routine.
+ */
+static void atl1e_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl1e_adapter *adapter = netdev->priv;
+
+	if (netif_running(netdev)) {
+		if (atl1e_up(adapter)) {
+			dev_err(&pdev->dev,
+			  "ATL1e: can't bring device back up after reset\n");
+			return;
+		}
+	}
+
+	netif_device_attach(netdev);
+}
+
+static struct pci_error_handlers atl1e_err_handler = {
+	.error_detected = atl1e_io_error_detected,
+	.slot_reset = atl1e_io_slot_reset,
+	.resume = atl1e_io_resume,
+};
+
+static struct pci_driver atl1e_driver = {
+	.name     = atl1e_driver_name,
+	.id_table = atl1e_pci_tbl,
+	.probe    = atl1e_probe,
+	.remove   = __devexit_p(atl1e_remove),
+	/* Power Managment Hooks */
+#ifdef CONFIG_PM
+	.suspend  = atl1e_suspend,
+	.resume   = atl1e_resume,
+#endif
+	.shutdown = atl1e_shutdown,
+	.err_handler = &atl1e_err_handler
+};
+
+/*
+ * atl1e_init_module - Driver Registration Routine
+ *
+ * atl1e_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ */
+static int __init atl1e_init_module(void)
+{
+	return pci_register_driver(&atl1e_driver);
+}
+
+/*
+ * atl1e_exit_module - Driver Exit Cleanup Routine
+ *
+ * atl1e_exit_module is called just before the driver is removed
+ * from memory.
+ */
+static void __exit atl1e_exit_module(void)
+{
+	pci_unregister_driver(&atl1e_driver);
+}
+
+module_init(atl1e_init_module);
+module_exit(atl1e_exit_module);
diff --git a/drivers/net/atl1e/atl1e_param.c b/drivers/net/atl1e/atl1e_param.c
new file mode 100644
index 00000000000..f72abb34b0c
--- /dev/null
+++ b/drivers/net/atl1e/atl1e_param.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/netdevice.h>
+
+#include "atl1e.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define ATL1E_MAX_NIC 32
+
+#define OPTION_UNSET    -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED  1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+#define ATL1E_PARAM_INIT { [0 ... ATL1E_MAX_NIC] = OPTION_UNSET }
+
+#define ATL1E_PARAM(x, desc) \
+	static int __devinitdata x[ATL1E_MAX_NIC + 1] = ATL1E_PARAM_INIT; \
+	static int num_##x; \
+	module_param_array_named(x, x, int, &num_##x, 0); \
+	MODULE_PARM_DESC(x, desc);
+
+/* Transmit Memory count
+ *
+ * Valid Range: 64-2048
+ *
+ * Default Value: 128
+ */
+#define ATL1E_MIN_TX_DESC_CNT		32
+#define ATL1E_MAX_TX_DESC_CNT		1020
+#define ATL1E_DEFAULT_TX_DESC_CNT	128
+ATL1E_PARAM(tx_desc_cnt, "Transmit description count");
+
+/* Receive Memory Block Count
+ *
+ * Valid Range: 16-512
+ *
+ * Default Value: 128
+ */
+#define ATL1E_MIN_RX_MEM_SIZE		8    /* 8KB   */
+#define ATL1E_MAX_RX_MEM_SIZE		1024 /* 1MB   */
+#define ATL1E_DEFAULT_RX_MEM_SIZE	256  /* 128KB */
+ATL1E_PARAM(rx_mem_size, "memory size of rx buffer(KB)");
+
+/* User Specified MediaType Override
+ *
+ * Valid Range: 0-5
+ *  - 0    - auto-negotiate at all supported speeds
+ *  - 1    - only link at 100Mbps Full Duplex
+ *  - 2    - only link at 100Mbps Half Duplex
+ *  - 3    - only link at 10Mbps Full Duplex
+ *  - 4    - only link at 10Mbps Half Duplex
+ * Default Value: 0
+ */
+
+ATL1E_PARAM(media_type, "MediaType Select");
+
+/* Interrupt Moderate Timer in units of 2 us
+ *
+ * Valid Range: 10-65535
+ *
+ * Default Value: 45000(90ms)
+ */
+#define INT_MOD_DEFAULT_CNT             100 /* 200us */
+#define INT_MOD_MAX_CNT                 65000
+#define INT_MOD_MIN_CNT                 50
+ATL1E_PARAM(int_mod_timer, "Interrupt Moderator Timer");
+
+#define AUTONEG_ADV_DEFAULT  0x2F
+#define AUTONEG_ADV_MASK     0x2F
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
+
+#define FLASH_VENDOR_DEFAULT    0
+#define FLASH_VENDOR_MIN        0
+#define FLASH_VENDOR_MAX        2
+
+struct atl1e_option {
+	enum { enable_option, range_option, list_option } type;
+	char *name;
+	char *err;
+	int  def;
+	union {
+		struct { /* range_option info */
+			int min;
+			int max;
+		} r;
+		struct { /* list_option info */
+			int nr;
+			struct atl1e_opt_list { int i; char *str; } *p;
+		} l;
+	} arg;
+};
+
+static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, struct pci_dev *pdev)
+{
+	if (*value == OPTION_UNSET) {
+		*value = opt->def;
+		return 0;
+	}
+
+	switch (opt->type) {
+	case enable_option:
+		switch (*value) {
+		case OPTION_ENABLED:
+			dev_info(&pdev->dev, "%s Enabled\n", opt->name);
+			return 0;
+		case OPTION_DISABLED:
+			dev_info(&pdev->dev, "%s Disabled\n", opt->name);
+			return 0;
+		}
+		break;
+	case range_option:
+		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+			dev_info(&pdev->dev, "%s set to %i\n", opt->name, *value);
+			return 0;
+		}
+		break;
+	case list_option:{
+			int i;
+			struct atl1e_opt_list *ent;
+
+			for (i = 0; i < opt->arg.l.nr; i++) {
+				ent = &opt->arg.l.p[i];
+				if (*value == ent->i) {
+					if (ent->str[0] != '\0')
+						dev_info(&pdev->dev, "%s\n",
+							ent->str);
+					return 0;
+				}
+			}
+			break;
+		}
+	default:
+		BUG();
+	}
+
+	dev_info(&pdev->dev, "Invalid %s specified (%i) %s\n",
+			opt->name, *value, opt->err);
+	*value = opt->def;
+	return -1;
+}
+
+/*
+ * atl1e_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input.  If an invalid value is given, or if no user specified
+ * value exists, a default value is used.  The final value is stored
+ * in a variable in the adapter structure.
+ */
+void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int bd = adapter->bd_number;
+	if (bd >= ATL1E_MAX_NIC) {
+		dev_notice(&pdev->dev, "no configuration for board #%i\n", bd);
+		dev_notice(&pdev->dev, "Using defaults for all values\n");
+	}
+
+	{ 		/* Transmit Ring Size */
+		struct atl1e_option opt = {
+			.type = range_option,
+			.name = "Transmit Ddescription Count",
+			.err  = "using default of "
+				__MODULE_STRING(ATL1E_DEFAULT_TX_DESC_CNT),
+			.def  = ATL1E_DEFAULT_TX_DESC_CNT,
+			.arg  = { .r = { .min = ATL1E_MIN_TX_DESC_CNT,
+					 .max = ATL1E_MAX_TX_DESC_CNT} }
+		};
+		int val;
+		if (num_tx_desc_cnt > bd) {
+			val = tx_desc_cnt[bd];
+			atl1e_validate_option(&val, &opt, pdev);
+			adapter->tx_ring.count = (u16) val & 0xFFFC;
+		} else
+			adapter->tx_ring.count = (u16)opt.def;
+	}
+
+	{ 		/* Receive Memory Block Count */
+		struct atl1e_option opt = {
+			.type = range_option,
+			.name = "Memory size of rx buffer(KB)",
+			.err  = "using default of "
+				__MODULE_STRING(ATL1E_DEFAULT_RX_MEM_SIZE),
+			.def  = ATL1E_DEFAULT_RX_MEM_SIZE,
+			.arg  = { .r = { .min = ATL1E_MIN_RX_MEM_SIZE,
+					 .max = ATL1E_MAX_RX_MEM_SIZE} }
+		};
+		int val;
+		if (num_rx_mem_size > bd) {
+			val = rx_mem_size[bd];
+			atl1e_validate_option(&val, &opt, pdev);
+			adapter->rx_ring.page_size = (u32)val * 1024;
+		} else {
+			adapter->rx_ring.page_size = (u32)opt.def * 1024;
+		}
+	}
+
+	{ 		/* Interrupt Moderate Timer */
+		struct atl1e_option opt = {
+			.type = range_option,
+			.name = "Interrupt Moderate Timer",
+			.err  = "using default of "
+				__MODULE_STRING(INT_MOD_DEFAULT_CNT),
+			.def  = INT_MOD_DEFAULT_CNT,
+			.arg  = { .r = { .min = INT_MOD_MIN_CNT,
+					 .max = INT_MOD_MAX_CNT} }
+		} ;
+		int val;
+		if (num_int_mod_timer > bd) {
+			val = int_mod_timer[bd];
+			atl1e_validate_option(&val, &opt, pdev);
+			adapter->hw.imt = (u16) val;
+		} else
+			adapter->hw.imt = (u16)(opt.def);
+	}
+
+	{ 		/* MediaType */
+		struct atl1e_option opt = {
+			.type = range_option,
+			.name = "Speed/Duplex Selection",
+			.err  = "using default of "
+				__MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR),
+			.def  = MEDIA_TYPE_AUTO_SENSOR,
+			.arg  = { .r = { .min = MEDIA_TYPE_AUTO_SENSOR,
+					 .max = MEDIA_TYPE_10M_HALF} }
+		} ;
+		int val;
+		if (num_media_type > bd) {
+			val = media_type[bd];
+			atl1e_validate_option(&val, &opt, pdev);
+			adapter->hw.media_type = (u16) val;
+		} else
+			adapter->hw.media_type = (u16)(opt.def);
+
+	}
+}
-- 
cgit v1.2.3


From cdc18a670923d01a762d66be582bfe763772d441 Mon Sep 17 00:00:00 2001
From: Christoph Lameter <cl@linux-foundation.org>
Date: Fri, 11 Jul 2008 16:12:34 -0500
Subject: Fix typo in meth driver

An | in an if statement to check a bit? I think this needs to be a &.
As a result of this typo meth will always operate in promiscuous mode.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/meth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index 0b32648a213..4cb364e67dc 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -287,7 +287,7 @@ int meth_reset(struct net_device *dev)
 
 	/* Initial mode: 10 | Half-duplex | Accept normal packets */
 	priv->mac_ctrl = METH_ACCEPT_MCAST | METH_DEFAULT_IPG;
-	if (dev->flags | IFF_PROMISC)
+	if (dev->flags & IFF_PROMISC)
 		priv->mac_ctrl |= METH_PROMISC;
 	mace->eth.mac_ctrl = priv->mac_ctrl;
 
-- 
cgit v1.2.3


From 6479884509e6cd30c6708fbf05fafc0d1fc85f7a Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 11 Jul 2008 15:17:02 -0700
Subject: e1000: neaten function declarations

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000/e1000_ethtool.c | 175 +++++-------
 drivers/net/e1000/e1000_hw.c      | 558 +++++++++++++-------------------------
 drivers/net/e1000/e1000_main.c    | 307 ++++++++-------------
 drivers/net/e1000/e1000_param.c   |  16 +-
 4 files changed, 385 insertions(+), 671 deletions(-)

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index a3f6a9c72ec..4bcfa374f4d 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -112,8 +112,8 @@ static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
 };
 #define E1000_TEST_LEN	ARRAY_SIZE(e1000_gstrings_test)
 
-static int
-e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+static int e1000_get_settings(struct net_device *netdev,
+			      struct ethtool_cmd *ecmd)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -185,8 +185,8 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 	return 0;
 }
 
-static int
-e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+static int e1000_set_settings(struct net_device *netdev,
+			      struct ethtool_cmd *ecmd)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -231,9 +231,8 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 	return 0;
 }
 
-static void
-e1000_get_pauseparam(struct net_device *netdev,
-                     struct ethtool_pauseparam *pause)
+static void e1000_get_pauseparam(struct net_device *netdev,
+				 struct ethtool_pauseparam *pause)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -251,9 +250,8 @@ e1000_get_pauseparam(struct net_device *netdev,
 	}
 }
 
-static int
-e1000_set_pauseparam(struct net_device *netdev,
-                     struct ethtool_pauseparam *pause)
+static int e1000_set_pauseparam(struct net_device *netdev,
+				struct ethtool_pauseparam *pause)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -289,15 +287,13 @@ e1000_set_pauseparam(struct net_device *netdev,
 	return retval;
 }
 
-static u32
-e1000_get_rx_csum(struct net_device *netdev)
+static u32 e1000_get_rx_csum(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	return adapter->rx_csum;
 }
 
-static int
-e1000_set_rx_csum(struct net_device *netdev, u32 data)
+static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	adapter->rx_csum = data;
@@ -309,14 +305,12 @@ e1000_set_rx_csum(struct net_device *netdev, u32 data)
 	return 0;
 }
 
-static u32
-e1000_get_tx_csum(struct net_device *netdev)
+static u32 e1000_get_tx_csum(struct net_device *netdev)
 {
 	return (netdev->features & NETIF_F_HW_CSUM) != 0;
 }
 
-static int
-e1000_set_tx_csum(struct net_device *netdev, u32 data)
+static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
@@ -334,8 +328,7 @@ e1000_set_tx_csum(struct net_device *netdev, u32 data)
 	return 0;
 }
 
-static int
-e1000_set_tso(struct net_device *netdev, u32 data)
+static int e1000_set_tso(struct net_device *netdev, u32 data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	if ((adapter->hw.mac_type < e1000_82544) ||
@@ -357,30 +350,26 @@ e1000_set_tso(struct net_device *netdev, u32 data)
 	return 0;
 }
 
-static u32
-e1000_get_msglevel(struct net_device *netdev)
+static u32 e1000_get_msglevel(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	return adapter->msg_enable;
 }
 
-static void
-e1000_set_msglevel(struct net_device *netdev, u32 data)
+static void e1000_set_msglevel(struct net_device *netdev, u32 data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	adapter->msg_enable = data;
 }
 
-static int
-e1000_get_regs_len(struct net_device *netdev)
+static int e1000_get_regs_len(struct net_device *netdev)
 {
 #define E1000_REGS_LEN 32
 	return E1000_REGS_LEN * sizeof(u32);
 }
 
-static void
-e1000_get_regs(struct net_device *netdev,
-	       struct ethtool_regs *regs, void *p)
+static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+			   void *p)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -468,16 +457,14 @@ e1000_get_regs(struct net_device *netdev,
 	}
 }
 
-static int
-e1000_get_eeprom_len(struct net_device *netdev)
+static int e1000_get_eeprom_len(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	return adapter->hw.eeprom.word_size * 2;
 }
 
-static int
-e1000_get_eeprom(struct net_device *netdev,
-                      struct ethtool_eeprom *eeprom, u8 *bytes)
+static int e1000_get_eeprom(struct net_device *netdev,
+			    struct ethtool_eeprom *eeprom, u8 *bytes)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -521,9 +508,8 @@ e1000_get_eeprom(struct net_device *netdev,
 	return ret_val;
 }
 
-static int
-e1000_set_eeprom(struct net_device *netdev,
-                      struct ethtool_eeprom *eeprom, u8 *bytes)
+static int e1000_set_eeprom(struct net_device *netdev,
+			    struct ethtool_eeprom *eeprom, u8 *bytes)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -584,9 +570,8 @@ e1000_set_eeprom(struct net_device *netdev,
 	return ret_val;
 }
 
-static void
-e1000_get_drvinfo(struct net_device *netdev,
-                       struct ethtool_drvinfo *drvinfo)
+static void e1000_get_drvinfo(struct net_device *netdev,
+			      struct ethtool_drvinfo *drvinfo)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	char firmware_version[32];
@@ -619,9 +604,8 @@ e1000_get_drvinfo(struct net_device *netdev,
 	drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
 }
 
-static void
-e1000_get_ringparam(struct net_device *netdev,
-                    struct ethtool_ringparam *ring)
+static void e1000_get_ringparam(struct net_device *netdev,
+				struct ethtool_ringparam *ring)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	e1000_mac_type mac_type = adapter->hw.mac_type;
@@ -640,9 +624,8 @@ e1000_get_ringparam(struct net_device *netdev,
 	ring->rx_jumbo_pending = 0;
 }
 
-static int
-e1000_set_ringparam(struct net_device *netdev,
-                    struct ethtool_ringparam *ring)
+static int e1000_set_ringparam(struct net_device *netdev,
+			       struct ethtool_ringparam *ring)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	e1000_mac_type mac_type = adapter->hw.mac_type;
@@ -728,8 +711,8 @@ err_setup:
 	return err;
 }
 
-static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
-			     int reg, u32 mask, u32 write)
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
+			     u32 mask, u32 write)
 {
 	static const u32 test[] =
 		{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
@@ -751,8 +734,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
 	return false;
 }
 
-static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
-			      int reg, u32 mask, u32 write)
+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
+			      u32 mask, u32 write)
 {
 	u8 __iomem *address = adapter->hw.hw_addr + reg;
 	u32 read;
@@ -787,8 +770,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
 			return 1;				     \
 	} while (0)
 
-static int
-e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
+static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 {
 	u32 value, before, after;
 	u32 i, toggle;
@@ -883,8 +865,7 @@ e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	return 0;
 }
 
-static int
-e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
+static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
 {
 	u16 temp;
 	u16 checksum = 0;
@@ -907,8 +888,7 @@ e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
 	return *data;
 }
 
-static irqreturn_t
-e1000_test_intr(int irq, void *data)
+static irqreturn_t e1000_test_intr(int irq, void *data)
 {
 	struct net_device *netdev = (struct net_device *) data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -918,8 +898,7 @@ e1000_test_intr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int
-e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
+static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 {
 	struct net_device *netdev = adapter->netdev;
 	u32 mask, i = 0;
@@ -1017,8 +996,7 @@ e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 	return *data;
 }
 
-static void
-e1000_free_desc_rings(struct e1000_adapter *adapter)
+static void e1000_free_desc_rings(struct e1000_adapter *adapter)
 {
 	struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
 	struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
@@ -1064,8 +1042,7 @@ e1000_free_desc_rings(struct e1000_adapter *adapter)
 	return;
 }
 
-static int
-e1000_setup_desc_rings(struct e1000_adapter *adapter)
+static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 {
 	struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
 	struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
@@ -1189,8 +1166,7 @@ err_nomem:
 	return ret_val;
 }
 
-static void
-e1000_phy_disable_receiver(struct e1000_adapter *adapter)
+static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
 {
 	/* Write out to PHY registers 29 and 30 to disable the Receiver. */
 	e1000_write_phy_reg(&adapter->hw, 29, 0x001F);
@@ -1199,8 +1175,7 @@ e1000_phy_disable_receiver(struct e1000_adapter *adapter)
 	e1000_write_phy_reg(&adapter->hw, 30, 0x8FF0);
 }
 
-static void
-e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
+static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
 {
 	u16 phy_reg;
 
@@ -1223,8 +1198,7 @@ e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
 		M88E1000_PHY_SPEC_CTRL, phy_reg);
 }
 
-static int
-e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
+static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
 {
 	u32 ctrl_reg;
 	u16 phy_reg;
@@ -1290,8 +1264,7 @@ e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
 	return 0;
 }
 
-static int
-e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
+static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 {
 	u32 ctrl_reg = 0;
 	u32 stat_reg = 0;
@@ -1360,8 +1333,7 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 	return 0;
 }
 
-static int
-e1000_set_phy_loopback(struct e1000_adapter *adapter)
+static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
 {
 	u16 phy_reg = 0;
 	u16 count = 0;
@@ -1412,8 +1384,7 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter)
 	return 8;
 }
 
-static int
-e1000_setup_loopback_test(struct e1000_adapter *adapter)
+static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl;
@@ -1447,8 +1418,7 @@ e1000_setup_loopback_test(struct e1000_adapter *adapter)
 	return 7;
 }
 
-static void
-e1000_loopback_cleanup(struct e1000_adapter *adapter)
+static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl;
@@ -1489,8 +1459,8 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter)
 	}
 }
 
-static void
-e1000_create_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
+static void e1000_create_lbtest_frame(struct sk_buff *skb,
+				      unsigned int frame_size)
 {
 	memset(skb->data, 0xFF, frame_size);
 	frame_size &= ~1;
@@ -1499,8 +1469,8 @@ e1000_create_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
 	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
 }
 
-static int
-e1000_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
+static int e1000_check_lbtest_frame(struct sk_buff *skb,
+				    unsigned int frame_size)
 {
 	frame_size &= ~1;
 	if (*(skb->data + 3) == 0xFF) {
@@ -1512,8 +1482,7 @@ e1000_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
 	return 13;
 }
 
-static int
-e1000_run_loopback_test(struct e1000_adapter *adapter)
+static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 {
 	struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
 	struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
@@ -1577,8 +1546,7 @@ e1000_run_loopback_test(struct e1000_adapter *adapter)
 	return ret_val;
 }
 
-static int
-e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
+static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
 {
 	/* PHY loopback cannot be performed if SoL/IDER
 	 * sessions are active */
@@ -1602,8 +1570,7 @@ out:
 	return *data;
 }
 
-static int
-e1000_link_test(struct e1000_adapter *adapter, u64 *data)
+static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
 {
 	*data = 0;
 	if (adapter->hw.media_type == e1000_media_type_internal_serdes) {
@@ -1632,8 +1599,7 @@ e1000_link_test(struct e1000_adapter *adapter, u64 *data)
 	return *data;
 }
 
-static int
-e1000_get_sset_count(struct net_device *netdev, int sset)
+static int e1000_get_sset_count(struct net_device *netdev, int sset)
 {
 	switch (sset) {
 	case ETH_SS_TEST:
@@ -1645,9 +1611,8 @@ e1000_get_sset_count(struct net_device *netdev, int sset)
 	}
 }
 
-static void
-e1000_diag_test(struct net_device *netdev,
-		   struct ethtool_test *eth_test, u64 *data)
+static void e1000_diag_test(struct net_device *netdev,
+			    struct ethtool_test *eth_test, u64 *data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	bool if_running = netif_running(netdev);
@@ -1717,7 +1682,8 @@ e1000_diag_test(struct net_device *netdev,
 	msleep_interruptible(4 * 1000);
 }
 
-static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
+static int e1000_wol_exclusion(struct e1000_adapter *adapter,
+			       struct ethtool_wolinfo *wol)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	int retval = 1; /* fail by default */
@@ -1778,8 +1744,8 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol
 	return retval;
 }
 
-static void
-e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+static void e1000_get_wol(struct net_device *netdev,
+			  struct ethtool_wolinfo *wol)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
@@ -1818,8 +1784,7 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	return;
 }
 
-static int
-e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -1863,8 +1828,7 @@ e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 /* bit defines for adapter->led_status */
 #define E1000_LED_ON		0
 
-static void
-e1000_led_blink_callback(unsigned long data)
+static void e1000_led_blink_callback(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
 
@@ -1876,8 +1840,7 @@ e1000_led_blink_callback(unsigned long data)
 	mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
 }
 
-static int
-e1000_phys_id(struct net_device *netdev, u32 data)
+static int e1000_phys_id(struct net_device *netdev, u32 data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
@@ -1916,8 +1879,7 @@ e1000_phys_id(struct net_device *netdev, u32 data)
 	return 0;
 }
 
-static int
-e1000_nway_reset(struct net_device *netdev)
+static int e1000_nway_reset(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	if (netif_running(netdev))
@@ -1925,9 +1887,8 @@ e1000_nway_reset(struct net_device *netdev)
 	return 0;
 }
 
-static void
-e1000_get_ethtool_stats(struct net_device *netdev,
-		struct ethtool_stats *stats, u64 *data)
+static void e1000_get_ethtool_stats(struct net_device *netdev,
+				    struct ethtool_stats *stats, u64 *data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int i;
@@ -1941,8 +1902,8 @@ e1000_get_ethtool_stats(struct net_device *netdev,
 /*	BUG_ON(i != E1000_STATS_LEN); */
 }
 
-static void
-e1000_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+static void e1000_get_strings(struct net_device *netdev, u32 stringset,
+			      u8 *data)
 {
 	u8 *p = data;
 	int i;
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 9a4b6cbddf2..d6c272ae437 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -42,48 +42,65 @@ static void e1000_release_software_semaphore(struct e1000_hw *hw);
 
 static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw);
 static s32 e1000_check_downshift(struct e1000_hw *hw);
-static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity);
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+				e1000_rev_polarity *polarity);
 static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
 static void e1000_clear_vfta(struct e1000_hw *hw);
 static s32 e1000_commit_shadow_ram(struct e1000_hw *hw);
 static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
-						  bool link_up);
+					      bool link_up);
 static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
 static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
 static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank);
 static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
-static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 *max_length);
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+				  u16 *max_length);
 static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
 static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
 static s32 e1000_get_software_flag(struct e1000_hw *hw);
 static s32 e1000_ich8_cycle_init(struct e1000_hw *hw);
 static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout);
 static s32 e1000_id_led_init(struct e1000_hw *hw);
-static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, u32 cnf_base_addr, u32 cnf_size);
+static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+						 u32 cnf_base_addr,
+						 u32 cnf_size);
 static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw);
 static void e1000_init_rx_addrs(struct e1000_hw *hw);
 static void e1000_initialize_hardware_bits(struct e1000_hw *hw);
 static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
 static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
 static s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
-static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, u16 offset, u8 *sum);
-static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr);
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
+				   u16 offset, u8 *sum);
+static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw,
+				      struct e1000_host_mng_command_header
+				      *hdr);
 static s32 e1000_mng_write_commit(struct e1000_hw *hw);
-static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
+				  struct e1000_phy_info *phy_info);
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+				  struct e1000_phy_info *phy_info);
+static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+				  u16 *data);
+static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
+				   u16 *data);
 static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
-static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+				  struct e1000_phy_info *phy_info);
 static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
 static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data);
-static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
+static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index,
+					u8 byte);
 static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
 static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data);
-static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 *data);
-static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 data);
-static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+				u16 *data);
+static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+				 u16 data);
+static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+				  u16 *data);
+static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+				   u16 *data);
 static void e1000_release_software_flag(struct e1000_hw *hw);
 static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
 static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
@@ -101,23 +118,21 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
 static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
 static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
 static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data,
-                                     u16 count);
+				     u16 count);
 static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
 static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
 static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
                                       u16 words, u16 *data);
-static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw,
-                                            u16 offset, u16 words,
-                                            u16 *data);
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+					u16 words, u16 *data);
 static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
 static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd);
 static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
-static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data,
-                                    u16 count);
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count);
 static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
-                                      u16 phy_data);
+				  u16 phy_data);
 static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr,
-                                     u16 *phy_data);
+				 u16 *phy_data);
 static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
 static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
 static void e1000_release_eeprom(struct e1000_hw *hw);
@@ -127,8 +142,7 @@ static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
 static s32 e1000_set_phy_mode(struct e1000_hw *hw);
 static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer);
 static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
-static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
-                                               u16 duplex);
+static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
 static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
 
 /* IGP cable length table */
@@ -159,8 +173,7 @@ u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static s32
-e1000_set_phy_type(struct e1000_hw *hw)
+static s32 e1000_set_phy_type(struct e1000_hw *hw)
 {
     DEBUGFUNC("e1000_set_phy_type");
 
@@ -210,8 +223,7 @@ e1000_set_phy_type(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static void
-e1000_phy_init_script(struct e1000_hw *hw)
+static void e1000_phy_init_script(struct e1000_hw *hw)
 {
     u32 ret_val;
     u16 phy_saved_data;
@@ -306,8 +318,7 @@ e1000_phy_init_script(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-s32
-e1000_set_mac_type(struct e1000_hw *hw)
+s32 e1000_set_mac_type(struct e1000_hw *hw)
 {
 	DEBUGFUNC("e1000_set_mac_type");
 
@@ -474,8 +485,7 @@ e1000_set_mac_type(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  * **************************************************************************/
-void
-e1000_set_media_type(struct e1000_hw *hw)
+void e1000_set_media_type(struct e1000_hw *hw)
 {
     u32 status;
 
@@ -528,8 +538,7 @@ e1000_set_media_type(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-s32
-e1000_reset_hw(struct e1000_hw *hw)
+s32 e1000_reset_hw(struct e1000_hw *hw)
 {
     u32 ctrl;
     u32 ctrl_ext;
@@ -747,8 +756,7 @@ e1000_reset_hw(struct e1000_hw *hw)
  * This function contains hardware limitation workarounds for PCI-E adapters
  *
  *****************************************************************************/
-static void
-e1000_initialize_hardware_bits(struct e1000_hw *hw)
+static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
 {
     if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) {
         /* Settings common to all PCI-express silicon */
@@ -866,8 +874,7 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
  * configuration and flow control settings. Clears all on-chip counters. Leaves
  * the transmit and receive units disabled and uninitialized.
  *****************************************************************************/
-s32
-e1000_init_hw(struct e1000_hw *hw)
+s32 e1000_init_hw(struct e1000_hw *hw)
 {
     u32 ctrl;
     u32 i;
@@ -1054,8 +1061,7 @@ e1000_init_hw(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code.
  *****************************************************************************/
-static s32
-e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
 {
     u16 eeprom_data;
     s32  ret_val;
@@ -1100,8 +1106,7 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
  * established. Assumes the hardware has previously been reset and the
  * transmitter and receiver are not enabled.
  *****************************************************************************/
-s32
-e1000_setup_link(struct e1000_hw *hw)
+s32 e1000_setup_link(struct e1000_hw *hw)
 {
     u32 ctrl_ext;
     s32 ret_val;
@@ -1233,8 +1238,7 @@ e1000_setup_link(struct e1000_hw *hw)
  * link. Assumes the hardware has been previously reset and the transmitter
  * and receiver are not enabled.
  *****************************************************************************/
-static s32
-e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 {
     u32 ctrl;
     u32 status;
@@ -1380,8 +1384,7 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static s32
-e1000_copper_link_preconfig(struct e1000_hw *hw)
+static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
 {
     u32 ctrl;
     s32 ret_val;
@@ -1440,8 +1443,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 *********************************************************************/
-static s32
-e1000_copper_link_igp_setup(struct e1000_hw *hw)
+static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
 {
     u32 led_ctrl;
     s32 ret_val;
@@ -1587,8 +1589,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 *********************************************************************/
-static s32
-e1000_copper_link_ggp_setup(struct e1000_hw *hw)
+static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 phy_data;
@@ -1735,8 +1736,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 *********************************************************************/
-static s32
-e1000_copper_link_mgp_setup(struct e1000_hw *hw)
+static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 phy_data;
@@ -1839,8 +1839,7 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 *********************************************************************/
-static s32
-e1000_copper_link_autoneg(struct e1000_hw *hw)
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 phy_data;
@@ -1910,8 +1909,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static s32
-e1000_copper_link_postconfig(struct e1000_hw *hw)
+static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
 {
     s32 ret_val;
     DEBUGFUNC("e1000_copper_link_postconfig");
@@ -1948,8 +1946,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static s32
-e1000_setup_copper_link(struct e1000_hw *hw)
+static s32 e1000_setup_copper_link(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 i;
@@ -2062,8 +2059,7 @@ e1000_setup_copper_link(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static s32
-e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
+static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
 {
     s32 ret_val = E1000_SUCCESS;
     u32 tipg;
@@ -2098,8 +2094,7 @@ e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
     return ret_val;
 }
 
-static s32
-e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
+static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
 {
     s32 ret_val = E1000_SUCCESS;
     u16 reg_data;
@@ -2135,8 +2130,7 @@ e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-s32
-e1000_phy_setup_autoneg(struct e1000_hw *hw)
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 mii_autoneg_adv_reg;
@@ -2284,8 +2278,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static s32
-e1000_phy_force_speed_duplex(struct e1000_hw *hw)
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 {
     u32 ctrl;
     s32 ret_val;
@@ -2535,8 +2528,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 * Link should have been established previously. Reads the speed and duplex
 * information from the Device Status register.
 ******************************************************************************/
-void
-e1000_config_collision_dist(struct e1000_hw *hw)
+void e1000_config_collision_dist(struct e1000_hw *hw)
 {
     u32 tctl, coll_dist;
 
@@ -2565,8 +2557,7 @@ e1000_config_collision_dist(struct e1000_hw *hw)
 * The contents of the PHY register containing the needed information need to
 * be passed in.
 ******************************************************************************/
-static s32
-e1000_config_mac_to_phy(struct e1000_hw *hw)
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
 {
     u32 ctrl;
     s32 ret_val;
@@ -2624,8 +2615,7 @@ e1000_config_mac_to_phy(struct e1000_hw *hw)
  * by the PHY rather than the MAC. Software must also configure these
  * bits when link is forced on a fiber connection.
  *****************************************************************************/
-s32
-e1000_force_mac_fc(struct e1000_hw *hw)
+s32 e1000_force_mac_fc(struct e1000_hw *hw)
 {
     u32 ctrl;
 
@@ -2691,8 +2681,7 @@ e1000_force_mac_fc(struct e1000_hw *hw)
  * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
  * and RFCE bits will be automaticaly set to the negotiated flow control mode.
  *****************************************************************************/
-static s32
-e1000_config_fc_after_link_up(struct e1000_hw *hw)
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 mii_status_reg;
@@ -2896,8 +2885,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw)
  *
  * Called by any function that needs to check the link status of the adapter.
  *****************************************************************************/
-s32
-e1000_check_for_link(struct e1000_hw *hw)
+s32 e1000_check_for_link(struct e1000_hw *hw)
 {
     u32 rxcw = 0;
     u32 ctrl;
@@ -3132,10 +3120,7 @@ e1000_check_for_link(struct e1000_hw *hw)
  * speed - Speed of the connection
  * duplex - Duplex setting of the connection
  *****************************************************************************/
-s32
-e1000_get_speed_and_duplex(struct e1000_hw *hw,
-                           u16 *speed,
-                           u16 *duplex)
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
 {
     u32 status;
     s32 ret_val;
@@ -3214,8 +3199,7 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static s32
-e1000_wait_autoneg(struct e1000_hw *hw)
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 i;
@@ -3249,9 +3233,7 @@ e1000_wait_autoneg(struct e1000_hw *hw)
 * hw - Struct containing variables accessed by shared code
 * ctrl - Device control register's current value
 ******************************************************************************/
-static void
-e1000_raise_mdi_clk(struct e1000_hw *hw,
-                    u32 *ctrl)
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
 {
     /* Raise the clock input to the Management Data Clock (by setting the MDC
      * bit), and then delay 10 microseconds.
@@ -3267,9 +3249,7 @@ e1000_raise_mdi_clk(struct e1000_hw *hw,
 * hw - Struct containing variables accessed by shared code
 * ctrl - Device control register's current value
 ******************************************************************************/
-static void
-e1000_lower_mdi_clk(struct e1000_hw *hw,
-                    u32 *ctrl)
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
 {
     /* Lower the clock input to the Management Data Clock (by clearing the MDC
      * bit), and then delay 10 microseconds.
@@ -3288,10 +3268,7 @@ e1000_lower_mdi_clk(struct e1000_hw *hw,
 *
 * Bits are shifted out in MSB to LSB order.
 ******************************************************************************/
-static void
-e1000_shift_out_mdi_bits(struct e1000_hw *hw,
-                         u32 data,
-                         u16 count)
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
 {
     u32 ctrl;
     u32 mask;
@@ -3338,8 +3315,7 @@ e1000_shift_out_mdi_bits(struct e1000_hw *hw,
 *
 * Bits are shifted in in MSB to LSB order.
 ******************************************************************************/
-static u16
-e1000_shift_in_mdi_bits(struct e1000_hw *hw)
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
 {
     u32 ctrl;
     u16 data = 0;
@@ -3384,8 +3360,7 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw)
     return data;
 }
 
-static s32
-e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
+static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
 {
     u32 swfw_sync = 0;
     u32 swmask = mask;
@@ -3428,8 +3403,7 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
     return E1000_SUCCESS;
 }
 
-static void
-e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
+static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
 {
     u32 swfw_sync;
     u32 swmask = mask;
@@ -3464,10 +3438,7 @@ e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to read
 ******************************************************************************/
-s32
-e1000_read_phy_reg(struct e1000_hw *hw,
-                   u32 reg_addr,
-                   u16 *phy_data)
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
 {
     u32 ret_val;
     u16 swfw;
@@ -3523,9 +3494,8 @@ e1000_read_phy_reg(struct e1000_hw *hw,
     return ret_val;
 }
 
-static s32
-e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
-                      u16 *phy_data)
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+				 u16 *phy_data)
 {
     u32 i;
     u32 mdic = 0;
@@ -3603,9 +3573,7 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
 * reg_addr - address of the PHY register to write
 * data - data to write to the PHY
 ******************************************************************************/
-s32
-e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr,
-                    u16 phy_data)
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
 {
     u32 ret_val;
     u16 swfw;
@@ -3661,9 +3629,8 @@ e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr,
     return ret_val;
 }
 
-static s32
-e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
-                       u16 phy_data)
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+				  u16 phy_data)
 {
     u32 i;
     u32 mdic = 0;
@@ -3723,10 +3690,7 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
     return E1000_SUCCESS;
 }
 
-static s32
-e1000_read_kmrn_reg(struct e1000_hw *hw,
-                    u32 reg_addr,
-                    u16 *data)
+static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data)
 {
     u32 reg_val;
     u16 swfw;
@@ -3756,10 +3720,7 @@ e1000_read_kmrn_reg(struct e1000_hw *hw,
     return E1000_SUCCESS;
 }
 
-static s32
-e1000_write_kmrn_reg(struct e1000_hw *hw,
-                     u32 reg_addr,
-                     u16 data)
+static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data)
 {
     u32 reg_val;
     u16 swfw;
@@ -3788,8 +3749,7 @@ e1000_write_kmrn_reg(struct e1000_hw *hw,
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-s32
-e1000_phy_hw_reset(struct e1000_hw *hw)
+s32 e1000_phy_hw_reset(struct e1000_hw *hw)
 {
     u32 ctrl, ctrl_ext;
     u32 led_ctrl;
@@ -3882,8 +3842,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
 *
 * Sets bit 15 of the MII Control register
 ******************************************************************************/
-s32
-e1000_phy_reset(struct e1000_hw *hw)
+s32 e1000_phy_reset(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 phy_data;
@@ -3934,8 +3893,7 @@ e1000_phy_reset(struct e1000_hw *hw)
 *
 * hw - struct containing variables accessed by shared code
 ******************************************************************************/
-void
-e1000_phy_powerdown_workaround(struct e1000_hw *hw)
+void e1000_phy_powerdown_workaround(struct e1000_hw *hw)
 {
     s32 reg;
     u16 phy_data;
@@ -3987,8 +3945,7 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw)
 *
 * hw - struct containing variables accessed by shared code
 ******************************************************************************/
-static s32
-e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
+static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
 {
     s32 ret_val;
     s32 reg;
@@ -4040,8 +3997,7 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static s32
-e1000_detect_gig_phy(struct e1000_hw *hw)
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
 {
     s32 phy_init_status, ret_val;
     u16 phy_id_high, phy_id_low;
@@ -4136,8 +4092,7 @@ e1000_detect_gig_phy(struct e1000_hw *hw)
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static s32
-e1000_phy_reset_dsp(struct e1000_hw *hw)
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
 {
     s32 ret_val;
     DEBUGFUNC("e1000_phy_reset_dsp");
@@ -4163,9 +4118,8 @@ e1000_phy_reset_dsp(struct e1000_hw *hw)
 * hw - Struct containing variables accessed by shared code
 * phy_info - PHY information structure
 ******************************************************************************/
-static s32
-e1000_phy_igp_get_info(struct e1000_hw *hw,
-                       struct e1000_phy_info *phy_info)
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+				  struct e1000_phy_info *phy_info)
 {
     s32 ret_val;
     u16 phy_data, min_length, max_length, average;
@@ -4240,9 +4194,8 @@ e1000_phy_igp_get_info(struct e1000_hw *hw,
 * hw - Struct containing variables accessed by shared code
 * phy_info - PHY information structure
 ******************************************************************************/
-static s32
-e1000_phy_ife_get_info(struct e1000_hw *hw,
-                       struct e1000_phy_info *phy_info)
+static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
+				  struct e1000_phy_info *phy_info)
 {
     s32 ret_val;
     u16 phy_data;
@@ -4290,9 +4243,8 @@ e1000_phy_ife_get_info(struct e1000_hw *hw,
 * hw - Struct containing variables accessed by shared code
 * phy_info - PHY information structure
 ******************************************************************************/
-static s32
-e1000_phy_m88_get_info(struct e1000_hw *hw,
-                       struct e1000_phy_info *phy_info)
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+				  struct e1000_phy_info *phy_info)
 {
     s32 ret_val;
     u16 phy_data;
@@ -4369,9 +4321,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw,
 * hw - Struct containing variables accessed by shared code
 * phy_info - PHY information structure
 ******************************************************************************/
-s32
-e1000_phy_get_info(struct e1000_hw *hw,
-                   struct e1000_phy_info *phy_info)
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
 {
     s32 ret_val;
     u16 phy_data;
@@ -4415,8 +4365,7 @@ e1000_phy_get_info(struct e1000_hw *hw,
         return e1000_phy_m88_get_info(hw, phy_info);
 }
 
-s32
-e1000_validate_mdi_setting(struct e1000_hw *hw)
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
 {
     DEBUGFUNC("e1000_validate_mdi_settings");
 
@@ -4436,8 +4385,7 @@ e1000_validate_mdi_setting(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-s32
-e1000_init_eeprom_params(struct e1000_hw *hw)
+s32 e1000_init_eeprom_params(struct e1000_hw *hw)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u32 eecd = E1000_READ_REG(hw, EECD);
@@ -4626,9 +4574,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw)
  * hw - Struct containing variables accessed by shared code
  * eecd - EECD's current value
  *****************************************************************************/
-static void
-e1000_raise_ee_clk(struct e1000_hw *hw,
-                   u32 *eecd)
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
 {
     /* Raise the clock input to the EEPROM (by setting the SK bit), and then
      * wait <delay> microseconds.
@@ -4645,9 +4591,7 @@ e1000_raise_ee_clk(struct e1000_hw *hw,
  * hw - Struct containing variables accessed by shared code
  * eecd - EECD's current value
  *****************************************************************************/
-static void
-e1000_lower_ee_clk(struct e1000_hw *hw,
-                   u32 *eecd)
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
 {
     /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
      * wait 50 microseconds.
@@ -4665,10 +4609,7 @@ e1000_lower_ee_clk(struct e1000_hw *hw,
  * data - data to send to the EEPROM
  * count - number of bits to shift out
  *****************************************************************************/
-static void
-e1000_shift_out_ee_bits(struct e1000_hw *hw,
-                        u16 data,
-                        u16 count)
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u32 eecd;
@@ -4718,9 +4659,7 @@ e1000_shift_out_ee_bits(struct e1000_hw *hw,
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static u16
-e1000_shift_in_ee_bits(struct e1000_hw *hw,
-                       u16 count)
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
 {
     u32 eecd;
     u32 i;
@@ -4762,8 +4701,7 @@ e1000_shift_in_ee_bits(struct e1000_hw *hw,
  * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
  * function should be called before issuing a command to the EEPROM.
  *****************************************************************************/
-static s32
-e1000_acquire_eeprom(struct e1000_hw *hw)
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u32 eecd, i=0;
@@ -4821,8 +4759,7 @@ e1000_acquire_eeprom(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static void
-e1000_standby_eeprom(struct e1000_hw *hw)
+static void e1000_standby_eeprom(struct e1000_hw *hw)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u32 eecd;
@@ -4870,8 +4807,7 @@ e1000_standby_eeprom(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static void
-e1000_release_eeprom(struct e1000_hw *hw)
+static void e1000_release_eeprom(struct e1000_hw *hw)
 {
     u32 eecd;
 
@@ -4921,8 +4857,7 @@ e1000_release_eeprom(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static s32
-e1000_spi_eeprom_ready(struct e1000_hw *hw)
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
 {
     u16 retry_count = 0;
     u8 spi_stat_reg;
@@ -4967,11 +4902,7 @@ e1000_spi_eeprom_ready(struct e1000_hw *hw)
  * data - word read from the EEPROM
  * words - number of words to read
  *****************************************************************************/
-s32
-e1000_read_eeprom(struct e1000_hw *hw,
-                  u16 offset,
-                  u16 words,
-                  u16 *data)
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u32 i = 0;
@@ -5068,11 +4999,8 @@ e1000_read_eeprom(struct e1000_hw *hw,
  * data - word read from the EEPROM
  * words - number of words to read
  *****************************************************************************/
-static s32
-e1000_read_eeprom_eerd(struct e1000_hw *hw,
-                  u16 offset,
-                  u16 words,
-                  u16 *data)
+static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+				  u16 *data)
 {
     u32 i, eerd = 0;
     s32 error = 0;
@@ -5102,11 +5030,8 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw,
  * data - word read from the EEPROM
  * words - number of words to read
  *****************************************************************************/
-static s32
-e1000_write_eeprom_eewr(struct e1000_hw *hw,
-                   u16 offset,
-                   u16 words,
-                   u16 *data)
+static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
+				   u16 *data)
 {
     u32    register_value = 0;
     u32    i              = 0;
@@ -5143,8 +5068,7 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw,
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static s32
-e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
+static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
 {
     u32 attempts = 100000;
     u32 i, reg = 0;
@@ -5171,8 +5095,7 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
 *
 * hw - Struct containing variables accessed by shared code
 ****************************************************************************/
-static bool
-e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
+static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
 {
     u32 eecd = 0;
 
@@ -5204,8 +5127,7 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
  * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
  * valid.
  *****************************************************************************/
-s32
-e1000_validate_eeprom_checksum(struct e1000_hw *hw)
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
 {
     u16 checksum = 0;
     u16 i, eeprom_data;
@@ -5268,8 +5190,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw)
  * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
  * Writes the difference to word offset 63 of the EEPROM.
  *****************************************************************************/
-s32
-e1000_update_eeprom_checksum(struct e1000_hw *hw)
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
 {
     u32 ctrl_ext;
     u16 checksum = 0;
@@ -5313,11 +5234,7 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw)
  * If e1000_update_eeprom_checksum is not called after this function, the
  * EEPROM will most likely contain an invalid checksum.
  *****************************************************************************/
-s32
-e1000_write_eeprom(struct e1000_hw *hw,
-                   u16 offset,
-                   u16 words,
-                   u16 *data)
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     s32 status = 0;
@@ -5370,11 +5287,8 @@ e1000_write_eeprom(struct e1000_hw *hw,
  * data - pointer to array of 8 bit words to be written to the EEPROM
  *
  *****************************************************************************/
-static s32
-e1000_write_eeprom_spi(struct e1000_hw *hw,
-                       u16 offset,
-                       u16 words,
-                       u16 *data)
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
+				  u16 *data)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u16 widx = 0;
@@ -5436,11 +5350,8 @@ e1000_write_eeprom_spi(struct e1000_hw *hw,
  * data - pointer to array of 16 bit words to be written to the EEPROM
  *
  *****************************************************************************/
-static s32
-e1000_write_eeprom_microwire(struct e1000_hw *hw,
-                             u16 offset,
-                             u16 words,
-                             u16 *data)
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+					u16 words, u16 *data)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u32 eecd;
@@ -5523,8 +5434,7 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw,
  * data - word read from the EEPROM
  * words - number of words to read
  *****************************************************************************/
-static s32
-e1000_commit_shadow_ram(struct e1000_hw *hw)
+static s32 e1000_commit_shadow_ram(struct e1000_hw *hw)
 {
     u32 attempts = 100000;
     u32 eecd = 0;
@@ -5687,8 +5597,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-s32
-e1000_read_mac_addr(struct e1000_hw * hw)
+s32 e1000_read_mac_addr(struct e1000_hw *hw)
 {
     u16 offset;
     u16 eeprom_data, i;
@@ -5731,8 +5640,7 @@ e1000_read_mac_addr(struct e1000_hw * hw)
  * of the receive addresss registers. Clears the multicast table. Assumes
  * the receiver is in reset when the routine is called.
  *****************************************************************************/
-static void
-e1000_init_rx_addrs(struct e1000_hw *hw)
+static void e1000_init_rx_addrs(struct e1000_hw *hw)
 {
     u32 i;
     u32 rar_num;
@@ -5770,9 +5678,7 @@ e1000_init_rx_addrs(struct e1000_hw *hw)
  * hw - Struct containing variables accessed by shared code
  * mc_addr - the multicast address to hash
  *****************************************************************************/
-u32
-e1000_hash_mc_addr(struct e1000_hw *hw,
-                   u8 *mc_addr)
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
 {
     u32 hash_value = 0;
 
@@ -5835,9 +5741,7 @@ e1000_hash_mc_addr(struct e1000_hw *hw,
  * hw - Struct containing variables accessed by shared code
  * hash_value - Multicast address hash value
  *****************************************************************************/
-void
-e1000_mta_set(struct e1000_hw *hw,
-              u32 hash_value)
+void e1000_mta_set(struct e1000_hw *hw, u32 hash_value)
 {
     u32 hash_bit, hash_reg;
     u32 mta;
@@ -5884,10 +5788,7 @@ e1000_mta_set(struct e1000_hw *hw,
  * addr - Address to put into receive address register
  * index - Receive address register to write
  *****************************************************************************/
-void
-e1000_rar_set(struct e1000_hw *hw,
-              u8 *addr,
-              u32 index)
+void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
 {
     u32 rar_low, rar_high;
 
@@ -5942,10 +5843,7 @@ e1000_rar_set(struct e1000_hw *hw,
  * offset - Offset in VLAN filer table to write
  * value - Value to write into VLAN filter table
  *****************************************************************************/
-void
-e1000_write_vfta(struct e1000_hw *hw,
-                 u32 offset,
-                 u32 value)
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
 {
     u32 temp;
 
@@ -5969,8 +5867,7 @@ e1000_write_vfta(struct e1000_hw *hw,
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static void
-e1000_clear_vfta(struct e1000_hw *hw)
+static void e1000_clear_vfta(struct e1000_hw *hw)
 {
     u32 offset;
     u32 vfta_value = 0;
@@ -6003,8 +5900,7 @@ e1000_clear_vfta(struct e1000_hw *hw)
     }
 }
 
-static s32
-e1000_id_led_init(struct e1000_hw * hw)
+static s32 e1000_id_led_init(struct e1000_hw *hw)
 {
     u32 ledctl;
     const u32 ledctl_mask = 0x000000FF;
@@ -6086,8 +5982,7 @@ e1000_id_led_init(struct e1000_hw * hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-s32
-e1000_setup_led(struct e1000_hw *hw)
+s32 e1000_setup_led(struct e1000_hw *hw)
 {
     u32 ledctl;
     s32 ret_val = E1000_SUCCESS;
@@ -6145,8 +6040,7 @@ e1000_setup_led(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-s32
-e1000_blink_led_start(struct e1000_hw *hw)
+s32 e1000_blink_led_start(struct e1000_hw *hw)
 {
     s16  i;
     u32 ledctl_blink = 0;
@@ -6180,8 +6074,7 @@ e1000_blink_led_start(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-s32
-e1000_cleanup_led(struct e1000_hw *hw)
+s32 e1000_cleanup_led(struct e1000_hw *hw)
 {
     s32 ret_val = E1000_SUCCESS;
 
@@ -6222,8 +6115,7 @@ e1000_cleanup_led(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-s32
-e1000_led_on(struct e1000_hw *hw)
+s32 e1000_led_on(struct e1000_hw *hw)
 {
     u32 ctrl = E1000_READ_REG(hw, CTRL);
 
@@ -6273,8 +6165,7 @@ e1000_led_on(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-s32
-e1000_led_off(struct e1000_hw *hw)
+s32 e1000_led_off(struct e1000_hw *hw)
 {
     u32 ctrl = E1000_READ_REG(hw, CTRL);
 
@@ -6324,8 +6215,7 @@ e1000_led_off(struct e1000_hw *hw)
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static void
-e1000_clear_hw_cntrs(struct e1000_hw *hw)
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
 {
     volatile u32 temp;
 
@@ -6428,8 +6318,7 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw)
  * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
  * before calling this function.
  *****************************************************************************/
-void
-e1000_reset_adaptive(struct e1000_hw *hw)
+void e1000_reset_adaptive(struct e1000_hw *hw)
 {
     DEBUGFUNC("e1000_reset_adaptive");
 
@@ -6456,8 +6345,7 @@ e1000_reset_adaptive(struct e1000_hw *hw)
  * tx_packets - Number of transmits since last callback
  * total_collisions - Number of collisions since last callback
  *****************************************************************************/
-void
-e1000_update_adaptive(struct e1000_hw *hw)
+void e1000_update_adaptive(struct e1000_hw *hw)
 {
     DEBUGFUNC("e1000_update_adaptive");
 
@@ -6492,11 +6380,8 @@ e1000_update_adaptive(struct e1000_hw *hw)
  * frame_len - The length of the frame in question
  * mac_addr - The Ethernet destination address of the frame in question
  *****************************************************************************/
-void
-e1000_tbi_adjust_stats(struct e1000_hw *hw,
-                       struct e1000_hw_stats *stats,
-                       u32 frame_len,
-                       u8 *mac_addr)
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+			    u32 frame_len, u8 *mac_addr)
 {
     u64 carry_bit;
 
@@ -6570,8 +6455,7 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw,
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-void
-e1000_get_bus_info(struct e1000_hw *hw)
+void e1000_get_bus_info(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 pci_ex_link_status;
@@ -6645,10 +6529,7 @@ e1000_get_bus_info(struct e1000_hw *hw)
  * offset - offset to write to
  * value - value to write
  *****************************************************************************/
-static void
-e1000_write_reg_io(struct e1000_hw *hw,
-                   u32 offset,
-                   u32 value)
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
 {
     unsigned long io_addr = hw->io_base;
     unsigned long io_data = hw->io_base + 4;
@@ -6672,10 +6553,8 @@ e1000_write_reg_io(struct e1000_hw *hw,
  * register to the minimum and maximum range.
  * For IGP phy's, the function calculates the range by the AGC registers.
  *****************************************************************************/
-static s32
-e1000_get_cable_length(struct e1000_hw *hw,
-                       u16 *min_length,
-                       u16 *max_length)
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+				  u16 *max_length)
 {
     s32 ret_val;
     u16 agc_value = 0;
@@ -6863,9 +6742,8 @@ e1000_get_cable_length(struct e1000_hw *hw,
  * return 0.  If the link speed is 1000 Mbps the polarity status is in the
  * IGP01E1000_PHY_PCS_INIT_REG.
  *****************************************************************************/
-static s32
-e1000_check_polarity(struct e1000_hw *hw,
-                     e1000_rev_polarity *polarity)
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+				e1000_rev_polarity *polarity)
 {
     s32 ret_val;
     u16 phy_data;
@@ -6939,8 +6817,7 @@ e1000_check_polarity(struct e1000_hw *hw,
  * Link Health register.  In IGP this bit is latched high, so the driver must
  * read it immediately after link is established.
  *****************************************************************************/
-static s32
-e1000_check_downshift(struct e1000_hw *hw)
+static s32 e1000_check_downshift(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 phy_data;
@@ -6985,9 +6862,7 @@ e1000_check_downshift(struct e1000_hw *hw)
  *
  ****************************************************************************/
 
-static s32
-e1000_config_dsp_after_link_change(struct e1000_hw *hw,
-                                   bool link_up)
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
 {
     s32 ret_val;
     u16 phy_data, phy_saved_data, speed, duplex, i;
@@ -7173,8 +7048,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw,
  *
  * hw - Struct containing variables accessed by shared code
  ****************************************************************************/
-static s32
-e1000_set_phy_mode(struct e1000_hw *hw)
+static s32 e1000_set_phy_mode(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 eeprom_data;
@@ -7218,9 +7092,7 @@ e1000_set_phy_mode(struct e1000_hw *hw)
  *
  ****************************************************************************/
 
-static s32
-e1000_set_d3_lplu_state(struct e1000_hw *hw,
-                        bool active)
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
 {
     u32 phy_ctrl = 0;
     s32 ret_val;
@@ -7348,9 +7220,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw,
  *
  ****************************************************************************/
 
-static s32
-e1000_set_d0_lplu_state(struct e1000_hw *hw,
-                        bool active)
+static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
 {
     u32 phy_ctrl = 0;
     s32 ret_val;
@@ -7439,8 +7309,7 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
  *
  * hw - Struct containing variables accessed by shared code
  *****************************************************************************/
-static s32
-e1000_set_vco_speed(struct e1000_hw *hw)
+static s32 e1000_set_vco_speed(struct e1000_hw *hw)
 {
     s32  ret_val;
     u16 default_page = 0;
@@ -7503,8 +7372,7 @@ e1000_set_vco_speed(struct e1000_hw *hw)
  *
  * returns: - E1000_SUCCESS .
  ****************************************************************************/
-static s32
-e1000_host_if_read_cookie(struct e1000_hw * hw, u8 *buffer)
+static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer)
 {
     u8 i;
     u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET;
@@ -7530,8 +7398,7 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, u8 *buffer)
  *            timeout
  *          - E1000_SUCCESS for success.
  ****************************************************************************/
-static s32
-e1000_mng_enable_host_if(struct e1000_hw * hw)
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
 {
     u32 hicr;
     u8 i;
@@ -7564,9 +7431,8 @@ e1000_mng_enable_host_if(struct e1000_hw * hw)
  *
  * returns  - E1000_SUCCESS for success.
  ****************************************************************************/
-static s32
-e1000_mng_host_if_write(struct e1000_hw * hw, u8 *buffer,
-                        u16 length, u16 offset, u8 *sum)
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
+				   u16 offset, u8 *sum)
 {
     u8 *tmp;
     u8 *bufptr = buffer;
@@ -7632,9 +7498,8 @@ e1000_mng_host_if_write(struct e1000_hw * hw, u8 *buffer,
  *
  * returns  - E1000_SUCCESS for success.
  ****************************************************************************/
-static s32
-e1000_mng_write_cmd_header(struct e1000_hw * hw,
-                           struct e1000_host_mng_command_header * hdr)
+static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+				      struct e1000_host_mng_command_header *hdr)
 {
     u16 i;
     u8 sum;
@@ -7672,8 +7537,7 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw,
  *
  * returns  - E1000_SUCCESS for success.
  ****************************************************************************/
-static s32
-e1000_mng_write_commit(struct e1000_hw * hw)
+static s32 e1000_mng_write_commit(struct e1000_hw *hw)
 {
     u32 hicr;
 
@@ -7690,8 +7554,7 @@ e1000_mng_write_commit(struct e1000_hw * hw)
  *
  * returns  - true when the mode is IAMT or false.
  ****************************************************************************/
-bool
-e1000_check_mng_mode(struct e1000_hw *hw)
+bool e1000_check_mng_mode(struct e1000_hw *hw)
 {
     u32 fwsm;
 
@@ -7712,9 +7575,7 @@ e1000_check_mng_mode(struct e1000_hw *hw)
 /*****************************************************************************
  * This function writes the dhcp info .
  ****************************************************************************/
-s32
-e1000_mng_write_dhcp_info(struct e1000_hw * hw, u8 *buffer,
-                          u16 length)
+s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
 {
     s32 ret_val;
     struct e1000_host_mng_command_header hdr;
@@ -7744,8 +7605,7 @@ e1000_mng_write_dhcp_info(struct e1000_hw * hw, u8 *buffer,
  *
  * returns  - checksum of buffer contents.
  ****************************************************************************/
-static u8
-e1000_calculate_mng_checksum(char *buffer, u32 length)
+static u8 e1000_calculate_mng_checksum(char *buffer, u32 length)
 {
     u8 sum = 0;
     u32 i;
@@ -7764,8 +7624,7 @@ e1000_calculate_mng_checksum(char *buffer, u32 length)
  *
  * returns  - true for packet filtering or false.
  ****************************************************************************/
-bool
-e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
+bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
 {
     /* called in init as well as watchdog timer functions */
 
@@ -7806,8 +7665,7 @@ e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
  * returns: - true/false
  *
  *****************************************************************************/
-u32
-e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
 {
     u32 manc;
     u32 fwsm, factps;
@@ -7832,8 +7690,7 @@ e1000_enable_mng_pass_thru(struct e1000_hw *hw)
     return false;
 }
 
-static s32
-e1000_polarity_reversal_workaround(struct e1000_hw *hw)
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
 {
     s32 ret_val;
     u16 mii_status_reg;
@@ -7926,8 +7783,7 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw)
  * returns: - none.
  *
  ***************************************************************************/
-static void
-e1000_set_pci_express_master_disable(struct e1000_hw *hw)
+static void e1000_set_pci_express_master_disable(struct e1000_hw *hw)
 {
     u32 ctrl;
 
@@ -7952,8 +7808,7 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw)
  *            E1000_SUCCESS master requests disabled.
  *
  ******************************************************************************/
-s32
-e1000_disable_pciex_master(struct e1000_hw *hw)
+s32 e1000_disable_pciex_master(struct e1000_hw *hw)
 {
     s32 timeout = MASTER_DISABLE_TIMEOUT;   /* 80ms */
 
@@ -7990,8 +7845,7 @@ e1000_disable_pciex_master(struct e1000_hw *hw)
  *            E1000_SUCCESS at any other case.
  *
  ******************************************************************************/
-static s32
-e1000_get_auto_rd_done(struct e1000_hw *hw)
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
 {
     s32 timeout = AUTO_READ_DONE_TIMEOUT;
 
@@ -8038,8 +7892,7 @@ e1000_get_auto_rd_done(struct e1000_hw *hw)
  *            E1000_SUCCESS at any other case.
  *
  ***************************************************************************/
-static s32
-e1000_get_phy_cfg_done(struct e1000_hw *hw)
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
 {
     s32 timeout = PHY_CFG_TIMEOUT;
     u32 cfg_mask = E1000_EEPROM_CFG_DONE;
@@ -8085,8 +7938,7 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw)
  *            E1000_SUCCESS at any other case.
  *
  ***************************************************************************/
-static s32
-e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
+static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
 {
     s32 timeout;
     u32 swsm;
@@ -8135,8 +7987,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
  * returns: - None.
  *
  ***************************************************************************/
-static void
-e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
+static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
 {
     u32 swsm;
 
@@ -8164,8 +8015,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
  *            E1000_SUCCESS at any other case.
  *
  ***************************************************************************/
-static s32
-e1000_get_software_semaphore(struct e1000_hw *hw)
+static s32 e1000_get_software_semaphore(struct e1000_hw *hw)
 {
     s32 timeout = hw->eeprom.word_size + 1;
     u32 swsm;
@@ -8200,8 +8050,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw)
  * hw: Struct containing variables accessed by shared code
  *
  ***************************************************************************/
-static void
-e1000_release_software_semaphore(struct e1000_hw *hw)
+static void e1000_release_software_semaphore(struct e1000_hw *hw)
 {
     u32 swsm;
 
@@ -8228,8 +8077,7 @@ e1000_release_software_semaphore(struct e1000_hw *hw)
  *            E1000_SUCCESS
  *
  *****************************************************************************/
-s32
-e1000_check_phy_reset_block(struct e1000_hw *hw)
+s32 e1000_check_phy_reset_block(struct e1000_hw *hw)
 {
     u32 manc = 0;
     u32 fwsm = 0;
@@ -8246,8 +8094,7 @@ e1000_check_phy_reset_block(struct e1000_hw *hw)
         E1000_BLK_PHY_RESET : E1000_SUCCESS;
 }
 
-static u8
-e1000_arc_subsystem_valid(struct e1000_hw *hw)
+static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw)
 {
     u32 fwsm;
 
@@ -8283,8 +8130,7 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw)
  * returns: E1000_SUCCESS
  *
  *****************************************************************************/
-static s32
-e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
+static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
 {
     u32 gcr_reg = 0;
 
@@ -8324,8 +8170,7 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
  * hw: Struct containing variables accessed by shared code
  *
  ***************************************************************************/
-static s32
-e1000_get_software_flag(struct e1000_hw *hw)
+static s32 e1000_get_software_flag(struct e1000_hw *hw)
 {
     s32 timeout = PHY_CFG_TIMEOUT;
     u32 extcnf_ctrl;
@@ -8363,8 +8208,7 @@ e1000_get_software_flag(struct e1000_hw *hw)
  * hw: Struct containing variables accessed by shared code
  *
  ***************************************************************************/
-static void
-e1000_release_software_flag(struct e1000_hw *hw)
+static void e1000_release_software_flag(struct e1000_hw *hw)
 {
     u32 extcnf_ctrl;
 
@@ -8388,9 +8232,8 @@ e1000_release_software_flag(struct e1000_hw *hw)
  * data - word read from the EEPROM
  * words - number of words to read
  *****************************************************************************/
-static s32
-e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
-                       u16 *data)
+static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+				  u16 *data)
 {
     s32  error = E1000_SUCCESS;
     u32 flash_bank = 0;
@@ -8444,9 +8287,8 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
  * words - number of words to write
  * data - words to write to the EEPROM
  *****************************************************************************/
-static s32
-e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
-                        u16 *data)
+static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
+				   u16 *data)
 {
     u32 i = 0;
     s32 error = E1000_SUCCESS;
@@ -8491,8 +8333,7 @@ e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
  *
  * hw - The pointer to the hw structure
  ****************************************************************************/
-static s32
-e1000_ich8_cycle_init(struct e1000_hw *hw)
+static s32 e1000_ich8_cycle_init(struct e1000_hw *hw)
 {
     union ich8_hws_flash_status hsfsts;
     s32 error = E1000_ERR_EEPROM;
@@ -8558,8 +8399,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw)
  *
  * hw - The pointer to the hw structure
  ****************************************************************************/
-static s32
-e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout)
+static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout)
 {
     union ich8_hws_flash_ctrl hsflctl;
     union ich8_hws_flash_status hsfsts;
@@ -8593,9 +8433,8 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout)
  * size - Size of data to read, 1=byte 2=word
  * data - Pointer to the word to store the value read.
  *****************************************************************************/
-static s32
-e1000_read_ich8_data(struct e1000_hw *hw, u32 index,
-                     u32 size, u16* data)
+static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+				u16 *data)
 {
     union ich8_hws_flash_status hsfsts;
     union ich8_hws_flash_ctrl hsflctl;
@@ -8672,9 +8511,8 @@ e1000_read_ich8_data(struct e1000_hw *hw, u32 index,
  * size - Size of data to read, 1=byte 2=word
  * data - The byte(s) to write to the NVM.
  *****************************************************************************/
-static s32
-e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
-                      u16 data)
+static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
+				 u16 data)
 {
     union ich8_hws_flash_status hsfsts;
     union ich8_hws_flash_ctrl hsflctl;
@@ -8747,8 +8585,7 @@ e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
  * index - The index of the byte to read.
  * data - Pointer to a byte to store the value read.
  *****************************************************************************/
-static s32
-e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8* data)
+static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data)
 {
     s32 status = E1000_SUCCESS;
     u16 word = 0;
@@ -8770,8 +8607,7 @@ e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8* data)
  * index - The index of the byte to write.
  * byte - The byte to write to the NVM.
  *****************************************************************************/
-static s32
-e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte)
+static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte)
 {
     s32 error = E1000_SUCCESS;
     s32 program_retries = 0;
@@ -8803,8 +8639,7 @@ e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte)
  * index - The index of the byte to read.
  * data - The byte to write to the NVM.
  *****************************************************************************/
-static s32
-e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data)
+static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data)
 {
     s32 status = E1000_SUCCESS;
     u16 word = (u16)data;
@@ -8821,8 +8656,7 @@ e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data)
  * index - The starting byte index of the word to read.
  * data - Pointer to a word to store the value read.
  *****************************************************************************/
-static s32
-e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data)
+static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data)
 {
     s32 status = E1000_SUCCESS;
     status = e1000_read_ich8_data(hw, index, 2, data);
@@ -8840,8 +8674,7 @@ e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data)
  * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
  * bank size may be 4, 8 or 64 KBytes
  *****************************************************************************/
-static s32
-e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank)
+static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank)
 {
     union ich8_hws_flash_status hsfsts;
     union ich8_hws_flash_ctrl hsflctl;
@@ -8930,9 +8763,9 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank)
     return error;
 }
 
-static s32
-e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
-                                      u32 cnf_base_addr, u32 cnf_size)
+static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+						 u32 cnf_base_addr,
+						 u32 cnf_size)
 {
     u32 ret_val = E1000_SUCCESS;
     u16 word_addr, reg_data, reg_addr;
@@ -8972,8 +8805,7 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
  *
  * hw: Struct containing variables accessed by shared code
  *****************************************************************************/
-static s32
-e1000_init_lcd_from_nvm(struct e1000_hw *hw)
+static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw)
 {
     u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop;
 
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index cf12b05cd01..9a20ba39346 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -232,8 +232,7 @@ MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
  * loaded. All it does is register with the PCI subsystem.
  **/
 
-static int __init
-e1000_init_module(void)
+static int __init e1000_init_module(void)
 {
 	int ret;
 	printk(KERN_INFO "%s - version %s\n",
@@ -261,8 +260,7 @@ module_init(e1000_init_module);
  * from memory.
  **/
 
-static void __exit
-e1000_exit_module(void)
+static void __exit e1000_exit_module(void)
 {
 	pci_unregister_driver(&e1000_driver);
 }
@@ -311,8 +309,7 @@ static void e1000_free_irq(struct e1000_adapter *adapter)
  * @adapter: board private structure
  **/
 
-static void
-e1000_irq_disable(struct e1000_adapter *adapter)
+static void e1000_irq_disable(struct e1000_adapter *adapter)
 {
 	E1000_WRITE_REG(&adapter->hw, IMC, ~0);
 	E1000_WRITE_FLUSH(&adapter->hw);
@@ -324,15 +321,13 @@ e1000_irq_disable(struct e1000_adapter *adapter)
  * @adapter: board private structure
  **/
 
-static void
-e1000_irq_enable(struct e1000_adapter *adapter)
+static void e1000_irq_enable(struct e1000_adapter *adapter)
 {
 	E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
 	E1000_WRITE_FLUSH(&adapter->hw);
 }
 
-static void
-e1000_update_mng_vlan(struct e1000_adapter *adapter)
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 	u16 vid = adapter->hw.mng_cookie.vlan_id;
@@ -366,8 +361,7 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter)
  *
  **/
 
-static void
-e1000_release_hw_control(struct e1000_adapter *adapter)
+static void e1000_release_hw_control(struct e1000_adapter *adapter)
 {
 	u32 ctrl_ext;
 	u32 swsm;
@@ -403,8 +397,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
  *
  **/
 
-static void
-e1000_get_hw_control(struct e1000_adapter *adapter)
+static void e1000_get_hw_control(struct e1000_adapter *adapter)
 {
 	u32 ctrl_ext;
 	u32 swsm;
@@ -429,8 +422,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter)
 	}
 }
 
-static void
-e1000_init_manageability(struct e1000_adapter *adapter)
+static void e1000_init_manageability(struct e1000_adapter *adapter)
 {
 	if (adapter->en_mng_pt) {
 		u32 manc = E1000_READ_REG(&adapter->hw, MANC);
@@ -456,8 +448,7 @@ e1000_init_manageability(struct e1000_adapter *adapter)
 	}
 }
 
-static void
-e1000_release_manageability(struct e1000_adapter *adapter)
+static void e1000_release_manageability(struct e1000_adapter *adapter)
 {
 	if (adapter->en_mng_pt) {
 		u32 manc = E1000_READ_REG(&adapter->hw, MANC);
@@ -591,8 +582,7 @@ out:
 	return;
 }
 
-void
-e1000_down(struct e1000_adapter *adapter)
+void e1000_down(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 
@@ -620,8 +610,7 @@ e1000_down(struct e1000_adapter *adapter)
 	e1000_clean_all_rx_rings(adapter);
 }
 
-void
-e1000_reinit_locked(struct e1000_adapter *adapter)
+void e1000_reinit_locked(struct e1000_adapter *adapter)
 {
 	WARN_ON(in_interrupt());
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
@@ -631,8 +620,7 @@ e1000_reinit_locked(struct e1000_adapter *adapter)
 	clear_bit(__E1000_RESETTING, &adapter->flags);
 }
 
-void
-e1000_reset(struct e1000_adapter *adapter)
+void e1000_reset(struct e1000_adapter *adapter)
 {
 	u32 pba = 0, tx_space, min_tx_space, min_rx_space;
 	u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
@@ -1231,8 +1219,7 @@ err_dma:
  * memory.
  **/
 
-static void __devexit
-e1000_remove(struct pci_dev *pdev)
+static void __devexit e1000_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -1283,8 +1270,7 @@ e1000_remove(struct pci_dev *pdev)
  * OS network device settings (MTU size).
  **/
 
-static int __devinit
-e1000_sw_init(struct e1000_adapter *adapter)
+static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
@@ -1377,8 +1363,7 @@ e1000_sw_init(struct e1000_adapter *adapter)
  * intended for Multiqueue, but should work fine with a single queue.
  **/
 
-static int __devinit
-e1000_alloc_queues(struct e1000_adapter *adapter)
+static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
 {
 	adapter->tx_ring = kcalloc(adapter->num_tx_queues,
 	                           sizeof(struct e1000_tx_ring), GFP_KERNEL);
@@ -1419,8 +1404,7 @@ e1000_alloc_queues(struct e1000_adapter *adapter)
  * and the stack is notified that the interface is ready.
  **/
 
-static int
-e1000_open(struct net_device *netdev)
+static int e1000_open(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int err;
@@ -1503,8 +1487,7 @@ err_setup_tx:
  * hardware, and all transmit and receive resources are freed.
  **/
 
-static int
-e1000_close(struct net_device *netdev)
+static int e1000_close(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
@@ -1540,9 +1523,8 @@ e1000_close(struct net_device *netdev)
  * @start: address of beginning of memory
  * @len: length of memory
  **/
-static bool
-e1000_check_64k_bound(struct e1000_adapter *adapter,
-		      void *start, unsigned long len)
+static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
+				  unsigned long len)
 {
 	unsigned long begin = (unsigned long) start;
 	unsigned long end = begin + len;
@@ -1565,9 +1547,8 @@ e1000_check_64k_bound(struct e1000_adapter *adapter,
  * Return 0 on success, negative on failure
  **/
 
-static int
-e1000_setup_tx_resources(struct e1000_adapter *adapter,
-                         struct e1000_tx_ring *txdr)
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+				    struct e1000_tx_ring *txdr)
 {
 	struct pci_dev *pdev = adapter->pdev;
 	int size;
@@ -1641,8 +1622,7 @@ setup_tx_desc_die:
  * Return 0 on success, negative on failure
  **/
 
-int
-e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
 {
 	int i, err = 0;
 
@@ -1668,8 +1648,7 @@ e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
  * Configure the Tx unit of the MAC after a reset.
  **/
 
-static void
-e1000_configure_tx(struct e1000_adapter *adapter)
+static void e1000_configure_tx(struct e1000_adapter *adapter)
 {
 	u64 tdba;
 	struct e1000_hw *hw = &adapter->hw;
@@ -1782,9 +1761,8 @@ e1000_configure_tx(struct e1000_adapter *adapter)
  * Returns 0 on success, negative on failure
  **/
 
-static int
-e1000_setup_rx_resources(struct e1000_adapter *adapter,
-                         struct e1000_rx_ring *rxdr)
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+				    struct e1000_rx_ring *rxdr)
 {
 	struct pci_dev *pdev = adapter->pdev;
 	int size, desc_len;
@@ -1887,8 +1865,7 @@ setup_rx_desc_die:
  * Return 0 on success, negative on failure
  **/
 
-int
-e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
 {
 	int i, err = 0;
 
@@ -1913,8 +1890,7 @@ e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
  **/
 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
 			(((S) & (PAGE_SIZE - 1)) ? 1 : 0))
-static void
-e1000_setup_rctl(struct e1000_adapter *adapter)
+static void e1000_setup_rctl(struct e1000_adapter *adapter)
 {
 	u32 rctl, rfctl;
 	u32 psrctl = 0;
@@ -2031,8 +2007,7 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
  * Configure the Rx unit of the MAC after a reset.
  **/
 
-static void
-e1000_configure_rx(struct e1000_adapter *adapter)
+static void e1000_configure_rx(struct e1000_adapter *adapter)
 {
 	u64 rdba;
 	struct e1000_hw *hw = &adapter->hw;
@@ -2131,9 +2106,8 @@ e1000_configure_rx(struct e1000_adapter *adapter)
  * Free all transmit software resources
  **/
 
-static void
-e1000_free_tx_resources(struct e1000_adapter *adapter,
-                        struct e1000_tx_ring *tx_ring)
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+				    struct e1000_tx_ring *tx_ring)
 {
 	struct pci_dev *pdev = adapter->pdev;
 
@@ -2154,8 +2128,7 @@ e1000_free_tx_resources(struct e1000_adapter *adapter,
  * Free all transmit software resources
  **/
 
-void
-e1000_free_all_tx_resources(struct e1000_adapter *adapter)
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
 {
 	int i;
 
@@ -2163,9 +2136,8 @@ e1000_free_all_tx_resources(struct e1000_adapter *adapter)
 		e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
 }
 
-static void
-e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
-			struct e1000_buffer *buffer_info)
+static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
+					     struct e1000_buffer *buffer_info)
 {
 	if (buffer_info->dma) {
 		pci_unmap_page(adapter->pdev,
@@ -2187,9 +2159,8 @@ e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
  * @tx_ring: ring to be cleaned
  **/
 
-static void
-e1000_clean_tx_ring(struct e1000_adapter *adapter,
-                    struct e1000_tx_ring *tx_ring)
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+				struct e1000_tx_ring *tx_ring)
 {
 	struct e1000_buffer *buffer_info;
 	unsigned long size;
@@ -2222,8 +2193,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter,
  * @adapter: board private structure
  **/
 
-static void
-e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
 {
 	int i;
 
@@ -2239,9 +2209,8 @@ e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
  * Free all receive software resources
  **/
 
-static void
-e1000_free_rx_resources(struct e1000_adapter *adapter,
-                        struct e1000_rx_ring *rx_ring)
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+				    struct e1000_rx_ring *rx_ring)
 {
 	struct pci_dev *pdev = adapter->pdev;
 
@@ -2266,8 +2235,7 @@ e1000_free_rx_resources(struct e1000_adapter *adapter,
  * Free all receive software resources
  **/
 
-void
-e1000_free_all_rx_resources(struct e1000_adapter *adapter)
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
 {
 	int i;
 
@@ -2281,9 +2249,8 @@ e1000_free_all_rx_resources(struct e1000_adapter *adapter)
  * @rx_ring: ring to free buffers from
  **/
 
-static void
-e1000_clean_rx_ring(struct e1000_adapter *adapter,
-                    struct e1000_rx_ring *rx_ring)
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+				struct e1000_rx_ring *rx_ring)
 {
 	struct e1000_buffer *buffer_info;
 	struct e1000_ps_page *ps_page;
@@ -2340,8 +2307,7 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter,
  * @adapter: board private structure
  **/
 
-static void
-e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
 {
 	int i;
 
@@ -2352,8 +2318,7 @@ e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
  * and memory write and invalidate disabled for certain operations
  */
-static void
-e1000_enter_82542_rst(struct e1000_adapter *adapter)
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 	u32 rctl;
@@ -2370,8 +2335,7 @@ e1000_enter_82542_rst(struct e1000_adapter *adapter)
 		e1000_clean_all_rx_rings(adapter);
 }
 
-static void
-e1000_leave_82542_rst(struct e1000_adapter *adapter)
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 	u32 rctl;
@@ -2401,8 +2365,7 @@ e1000_leave_82542_rst(struct e1000_adapter *adapter)
  * Returns 0 on success, negative on failure
  **/
 
-static int
-e1000_set_mac(struct net_device *netdev, void *p)
+static int e1000_set_mac(struct net_device *netdev, void *p)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct sockaddr *addr = p;
@@ -2452,8 +2415,7 @@ e1000_set_mac(struct net_device *netdev, void *p)
  * promiscuous mode, and all-multi behavior.
  **/
 
-static void
-e1000_set_rx_mode(struct net_device *netdev)
+static void e1000_set_rx_mode(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -2552,8 +2514,7 @@ e1000_set_rx_mode(struct net_device *netdev)
 /* Need to wait a few seconds after link up to get diagnostic information from
  * the phy */
 
-static void
-e1000_update_phy_info(unsigned long data)
+static void e1000_update_phy_info(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
 	e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
@@ -2564,8 +2525,7 @@ e1000_update_phy_info(unsigned long data)
  * @data: pointer to adapter cast into an unsigned long
  **/
 
-static void
-e1000_82547_tx_fifo_stall(unsigned long data)
+static void e1000_82547_tx_fifo_stall(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
 	struct net_device *netdev = adapter->netdev;
@@ -2605,8 +2565,7 @@ e1000_82547_tx_fifo_stall(unsigned long data)
  * e1000_watchdog - Timer Call-back
  * @data: pointer to adapter cast into an unsigned long
  **/
-static void
-e1000_watchdog(unsigned long data)
+static void e1000_watchdog(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
 	struct net_device *netdev = adapter->netdev;
@@ -2806,9 +2765,7 @@ enum latency_range {
  * @bytes: the number of bytes during this measurement interval
  **/
 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
-                                   u16 itr_setting,
-                                   int packets,
-                                   int bytes)
+				     u16 itr_setting, int packets, int bytes)
 {
 	unsigned int retval = itr_setting;
 	struct e1000_hw *hw = &adapter->hw;
@@ -2926,9 +2883,8 @@ set_itr_now:
 #define E1000_TX_FLAGS_VLAN_MASK	0xffff0000
 #define E1000_TX_FLAGS_VLAN_SHIFT	16
 
-static int
-e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
-          struct sk_buff *skb)
+static int e1000_tso(struct e1000_adapter *adapter,
+		     struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
 {
 	struct e1000_context_desc *context_desc;
 	struct e1000_buffer *buffer_info;
@@ -2999,9 +2955,8 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 	return false;
 }
 
-static bool
-e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
-              struct sk_buff *skb)
+static bool e1000_tx_csum(struct e1000_adapter *adapter,
+			  struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
 {
 	struct e1000_context_desc *context_desc;
 	struct e1000_buffer *buffer_info;
@@ -3038,10 +2993,11 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 #define E1000_MAX_TXD_PWR	12
 #define E1000_MAX_DATA_PER_TXD	(1<<E1000_MAX_TXD_PWR)
 
-static int
-e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
-             struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
-             unsigned int nr_frags, unsigned int mss)
+static int e1000_tx_map(struct e1000_adapter *adapter,
+			struct e1000_tx_ring *tx_ring,
+			struct sk_buff *skb, unsigned int first,
+			unsigned int max_per_txd, unsigned int nr_frags,
+			unsigned int mss)
 {
 	struct e1000_buffer *buffer_info;
 	unsigned int len = skb->len;
@@ -3145,9 +3101,9 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 	return count;
 }
 
-static void
-e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
-               int tx_flags, int count)
+static void e1000_tx_queue(struct e1000_adapter *adapter,
+			   struct e1000_tx_ring *tx_ring, int tx_flags,
+			   int count)
 {
 	struct e1000_tx_desc *tx_desc = NULL;
 	struct e1000_buffer *buffer_info;
@@ -3212,8 +3168,8 @@ e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
 #define E1000_FIFO_HDR			0x10
 #define E1000_82547_PAD_LEN		0x3E0
 
-static int
-e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+				       struct sk_buff *skb)
 {
 	u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
 	u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
@@ -3239,8 +3195,8 @@ no_fifo_stall_required:
 }
 
 #define MINIMUM_DHCP_PACKET_SIZE 282
-static int
-e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
+static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
+				    struct sk_buff *skb)
 {
 	struct e1000_hw *hw =  &adapter->hw;
 	u16 length, offset;
@@ -3304,8 +3260,7 @@ static int e1000_maybe_stop_tx(struct net_device *netdev,
 }
 
 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
-static int
-e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_tx_ring *tx_ring;
@@ -3482,8 +3437,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
  * @netdev: network interface device structure
  **/
 
-static void
-e1000_tx_timeout(struct net_device *netdev)
+static void e1000_tx_timeout(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
@@ -3492,8 +3446,7 @@ e1000_tx_timeout(struct net_device *netdev)
 	schedule_work(&adapter->reset_task);
 }
 
-static void
-e1000_reset_task(struct work_struct *work)
+static void e1000_reset_task(struct work_struct *work)
 {
 	struct e1000_adapter *adapter =
 		container_of(work, struct e1000_adapter, reset_task);
@@ -3509,8 +3462,7 @@ e1000_reset_task(struct work_struct *work)
  * The statistics are actually updated from the timer callback.
  **/
 
-static struct net_device_stats *
-e1000_get_stats(struct net_device *netdev)
+static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
@@ -3526,8 +3478,7 @@ e1000_get_stats(struct net_device *netdev)
  * Returns 0 on success, negative on failure
  **/
 
-static int
-e1000_change_mtu(struct net_device *netdev, int new_mtu)
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
@@ -3620,8 +3571,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
  * @adapter: board private structure
  **/
 
-void
-e1000_update_stats(struct e1000_adapter *adapter)
+void e1000_update_stats(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
@@ -3794,8 +3744,7 @@ e1000_update_stats(struct e1000_adapter *adapter)
  * @data: pointer to a network interface device structure
  **/
 
-static irqreturn_t
-e1000_intr_msi(int irq, void *data)
+static irqreturn_t e1000_intr_msi(int irq, void *data)
 {
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -3856,8 +3805,7 @@ e1000_intr_msi(int irq, void *data)
  * @data: pointer to a network interface device structure
  **/
 
-static irqreturn_t
-e1000_intr(int irq, void *data)
+static irqreturn_t e1000_intr(int irq, void *data)
 {
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -3954,8 +3902,7 @@ e1000_intr(int irq, void *data)
  * @adapter: board private structure
  **/
 
-static int
-e1000_clean(struct napi_struct *napi, int budget)
+static int e1000_clean(struct napi_struct *napi, int budget)
 {
 	struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
 	struct net_device *poll_dev = adapter->netdev;
@@ -3997,9 +3944,8 @@ e1000_clean(struct napi_struct *napi, int budget)
  * @adapter: board private structure
  **/
 
-static bool
-e1000_clean_tx_irq(struct e1000_adapter *adapter,
-                   struct e1000_tx_ring *tx_ring)
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+			       struct e1000_tx_ring *tx_ring)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_tx_desc *tx_desc, *eop_desc;
@@ -4111,10 +4057,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter,
  * @sk_buff:     socket buffer with received data
  **/
 
-static void
-e1000_rx_checksum(struct e1000_adapter *adapter,
-		  u32 status_err, u32 csum,
-		  struct sk_buff *skb)
+static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
+			      u32 csum, struct sk_buff *skb)
 {
 	u16 status = (u16)status_err;
 	u8 errors = (u8)(status_err >> 24);
@@ -4158,15 +4102,13 @@ e1000_rx_checksum(struct e1000_adapter *adapter,
  * e1000_clean_rx_irq - Send received data up the network stack; legacy
  * @adapter: board private structure
  **/
-
-static bool
 #ifdef CONFIG_E1000_NAPI
-e1000_clean_rx_irq(struct e1000_adapter *adapter,
-                   struct e1000_rx_ring *rx_ring,
-                   int *work_done, int work_to_do)
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+			       struct e1000_rx_ring *rx_ring,
+			       int *work_done, int work_to_do)
 #else
-e1000_clean_rx_irq(struct e1000_adapter *adapter,
-                   struct e1000_rx_ring *rx_ring)
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+			       struct e1000_rx_ring *rx_ring)
 #endif
 {
 	struct net_device *netdev = adapter->netdev;
@@ -4330,14 +4272,13 @@ next_desc:
  * @adapter: board private structure
  **/
 
-static bool
 #ifdef CONFIG_E1000_NAPI
-e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
-                      struct e1000_rx_ring *rx_ring,
-                      int *work_done, int work_to_do)
+static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+				  struct e1000_rx_ring *rx_ring,
+				  int *work_done, int work_to_do)
 #else
-e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
-                      struct e1000_rx_ring *rx_ring)
+static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+				  struct e1000_rx_ring *rx_ring)
 #endif
 {
 	union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
@@ -4517,10 +4458,9 @@ next_desc:
  * @adapter: address of board private structure
  **/
 
-static void
-e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
-                       struct e1000_rx_ring *rx_ring,
-		       int cleaned_count)
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+				   struct e1000_rx_ring *rx_ring,
+				   int cleaned_count)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
@@ -4628,10 +4568,9 @@ map_skb:
  * @adapter: address of board private structure
  **/
 
-static void
-e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
-                          struct e1000_rx_ring *rx_ring,
-			  int cleaned_count)
+static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
+				      struct e1000_rx_ring *rx_ring,
+				      int cleaned_count)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
@@ -4726,8 +4665,7 @@ no_buffers:
  * @adapter:
  **/
 
-static void
-e1000_smartspeed(struct e1000_adapter *adapter)
+static void e1000_smartspeed(struct e1000_adapter *adapter)
 {
 	u16 phy_status;
 	u16 phy_ctrl;
@@ -4783,8 +4721,7 @@ e1000_smartspeed(struct e1000_adapter *adapter)
  * @cmd:
  **/
 
-static int
-e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 {
 	switch (cmd) {
 	case SIOCGMIIPHY:
@@ -4803,8 +4740,8 @@ e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
  * @cmd:
  **/
 
-static int
-e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+			   int cmd)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct mii_ioctl_data *data = if_mii(ifr);
@@ -4897,8 +4834,7 @@ e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 	return E1000_SUCCESS;
 }
 
-void
-e1000_pci_set_mwi(struct e1000_hw *hw)
+void e1000_pci_set_mwi(struct e1000_hw *hw)
 {
 	struct e1000_adapter *adapter = hw->back;
 	int ret_val = pci_set_mwi(adapter->pdev);
@@ -4907,30 +4843,26 @@ e1000_pci_set_mwi(struct e1000_hw *hw)
 		DPRINTK(PROBE, ERR, "Error in setting MWI\n");
 }
 
-void
-e1000_pci_clear_mwi(struct e1000_hw *hw)
+void e1000_pci_clear_mwi(struct e1000_hw *hw)
 {
 	struct e1000_adapter *adapter = hw->back;
 
 	pci_clear_mwi(adapter->pdev);
 }
 
-int
-e1000_pcix_get_mmrbc(struct e1000_hw *hw)
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
 {
 	struct e1000_adapter *adapter = hw->back;
 	return pcix_get_mmrbc(adapter->pdev);
 }
 
-void
-e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
 {
 	struct e1000_adapter *adapter = hw->back;
 	pcix_set_mmrbc(adapter->pdev, mmrbc);
 }
 
-s32
-e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
 {
     struct e1000_adapter *adapter = hw->back;
     u16 cap_offset;
@@ -4944,14 +4876,13 @@ e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
     return E1000_SUCCESS;
 }
 
-void
-e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
 {
 	outl(value, port);
 }
 
-static void
-e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
+static void e1000_vlan_rx_register(struct net_device *netdev,
+				   struct vlan_group *grp)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	u32 ctrl, rctl;
@@ -4993,8 +4924,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 		e1000_irq_enable(adapter);
 }
 
-static void
-e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	u32 vfta, index;
@@ -5010,8 +4940,7 @@ e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 	e1000_write_vfta(&adapter->hw, index, vfta);
 }
 
-static void
-e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	u32 vfta, index;
@@ -5037,8 +4966,7 @@ e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 	e1000_write_vfta(&adapter->hw, index, vfta);
 }
 
-static void
-e1000_restore_vlan(struct e1000_adapter *adapter)
+static void e1000_restore_vlan(struct e1000_adapter *adapter)
 {
 	e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
 
@@ -5052,8 +4980,7 @@ e1000_restore_vlan(struct e1000_adapter *adapter)
 	}
 }
 
-int
-e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 {
 	adapter->hw.autoneg = 0;
 
@@ -5089,8 +5016,7 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 	return 0;
 }
 
-static int
-e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5187,8 +5113,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 }
 
 #ifdef CONFIG_PM
-static int
-e1000_resume(struct pci_dev *pdev)
+static int e1000_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5242,8 +5167,7 @@ static void e1000_shutdown(struct pci_dev *pdev)
  * without having to re-enable interrupts. It's not called while
  * the interrupt routine is executing.
  */
-static void
-e1000_netpoll(struct net_device *netdev)
+static void e1000_netpoll(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
@@ -5264,7 +5188,8 @@ e1000_netpoll(struct net_device *netdev)
  * This function is called after a PCI bus error affecting
  * this device has been detected.
  */
-static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+						pci_channel_state_t state)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev->priv;
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index e6565ce686b..b9f90a5d3d4 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -213,10 +213,9 @@ struct e1000_option {
 	} arg;
 };
 
-static int __devinit
-e1000_validate_option(unsigned int *value,
-		      const struct e1000_option *opt,
-		      struct e1000_adapter *adapter)
+static int __devinit e1000_validate_option(unsigned int *value,
+					   const struct e1000_option *opt,
+					   struct e1000_adapter *adapter)
 {
 	if (*value == OPTION_UNSET) {
 		*value = opt->def;
@@ -278,8 +277,7 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter);
  * in a variable in the adapter structure.
  **/
 
-void __devinit
-e1000_check_options(struct e1000_adapter *adapter)
+void __devinit e1000_check_options(struct e1000_adapter *adapter)
 {
 	int bd = adapter->bd_number;
 	if (bd >= E1000_MAX_NIC) {
@@ -551,8 +549,7 @@ e1000_check_options(struct e1000_adapter *adapter)
  * Handles speed and duplex options on fiber adapters
  **/
 
-static void __devinit
-e1000_check_fiber_options(struct e1000_adapter *adapter)
+static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
 {
 	int bd = adapter->bd_number;
 	if (num_Speed > bd) {
@@ -579,8 +576,7 @@ e1000_check_fiber_options(struct e1000_adapter *adapter)
  * Handles speed and duplex options on copper adapters
  **/
 
-static void __devinit
-e1000_check_copper_options(struct e1000_adapter *adapter)
+static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 {
 	unsigned int speed, dplx, an;
 	int bd = adapter->bd_number;
-- 
cgit v1.2.3


From 9bcab8405c98c34849c5795c717b7e6a3e2d3875 Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Fri, 11 Jul 2008 09:03:09 +1000
Subject: powerpc/spufs: correct kcalloc usage

kcalloc is supposed to be called with the count as its first argument and
the element size as the second.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/sputrace.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 8c0e95766a6..92d20e993ed 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -196,8 +196,7 @@ static int __init sputrace_init(void)
 	struct proc_dir_entry *entry;
 	int i, error = -ENOMEM;
 
-	sputrace_log = kcalloc(sizeof(struct sputrace),
-				bufsize, GFP_KERNEL);
+	sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL);
 	if (!sputrace_log)
 		goto out;
 
-- 
cgit v1.2.3


From 1dc329180fe22ff8651e0ef550ba17ca1cc7bf22 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 11 Jul 2008 15:17:08 -0700
Subject: e1000: Use hw, er32, and ew32

Use struct e1000_hw *hw = adapter->hw; where necessary
Change macros E1000_READ_REG and E1000_WRITE_REG to er32 and ew32

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000/e1000_ethtool.c | 313 +++++++------
 drivers/net/e1000/e1000_hw.c      | 762 +++++++++++++++----------------
 drivers/net/e1000/e1000_main.c    | 910 ++++++++++++++++++++------------------
 drivers/net/e1000/e1000_osdep.h   |  14 +-
 4 files changed, 1029 insertions(+), 970 deletions(-)

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 4bcfa374f4d..966d52a529e 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -162,7 +162,7 @@ static int e1000_get_settings(struct net_device *netdev,
 			ecmd->transceiver = XCVR_EXTERNAL;
 	}
 
-	if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU) {
+	if (er32(STATUS) & E1000_STATUS_LU) {
 
 		e1000_get_speed_and_duplex(hw, &adapter->link_speed,
 		                                   &adapter->link_duplex);
@@ -313,8 +313,9 @@ static u32 e1000_get_tx_csum(struct net_device *netdev)
 static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 
-	if (adapter->hw.mac_type < e1000_82543) {
+	if (hw->mac_type < e1000_82543) {
 		if (!data)
 			return -EINVAL;
 		return 0;
@@ -331,8 +332,10 @@ static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
 static int e1000_set_tso(struct net_device *netdev, u32 data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	if ((adapter->hw.mac_type < e1000_82544) ||
-	    (adapter->hw.mac_type == e1000_82547))
+	struct e1000_hw *hw = &adapter->hw;
+
+	if ((hw->mac_type < e1000_82544) ||
+	    (hw->mac_type == e1000_82547))
 		return data ? -EINVAL : 0;
 
 	if (data)
@@ -380,22 +383,22 @@ static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
 
 	regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
 
-	regs_buff[0]  = E1000_READ_REG(hw, CTRL);
-	regs_buff[1]  = E1000_READ_REG(hw, STATUS);
+	regs_buff[0]  = er32(CTRL);
+	regs_buff[1]  = er32(STATUS);
 
-	regs_buff[2]  = E1000_READ_REG(hw, RCTL);
-	regs_buff[3]  = E1000_READ_REG(hw, RDLEN);
-	regs_buff[4]  = E1000_READ_REG(hw, RDH);
-	regs_buff[5]  = E1000_READ_REG(hw, RDT);
-	regs_buff[6]  = E1000_READ_REG(hw, RDTR);
+	regs_buff[2]  = er32(RCTL);
+	regs_buff[3]  = er32(RDLEN);
+	regs_buff[4]  = er32(RDH);
+	regs_buff[5]  = er32(RDT);
+	regs_buff[6]  = er32(RDTR);
 
-	regs_buff[7]  = E1000_READ_REG(hw, TCTL);
-	regs_buff[8]  = E1000_READ_REG(hw, TDLEN);
-	regs_buff[9]  = E1000_READ_REG(hw, TDH);
-	regs_buff[10] = E1000_READ_REG(hw, TDT);
-	regs_buff[11] = E1000_READ_REG(hw, TIDV);
+	regs_buff[7]  = er32(TCTL);
+	regs_buff[8]  = er32(TDLEN);
+	regs_buff[9]  = er32(TDH);
+	regs_buff[10] = er32(TDT);
+	regs_buff[11] = er32(TIDV);
 
-	regs_buff[12] = adapter->hw.phy_type;  /* PHY type (IGP=1, M88=0) */
+	regs_buff[12] = hw->phy_type;  /* PHY type (IGP=1, M88=0) */
 	if (hw->phy_type == e1000_phy_igp) {
 		e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
 				    IGP01E1000_PHY_AGC_A);
@@ -453,14 +456,16 @@ static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
 	if (hw->mac_type >= e1000_82540 &&
 	    hw->mac_type < e1000_82571 &&
 	    hw->media_type == e1000_media_type_copper) {
-		regs_buff[26] = E1000_READ_REG(hw, MANC);
+		regs_buff[26] = er32(MANC);
 	}
 }
 
 static int e1000_get_eeprom_len(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	return adapter->hw.eeprom.word_size * 2;
+	struct e1000_hw *hw = &adapter->hw;
+
+	return hw->eeprom.word_size * 2;
 }
 
 static int e1000_get_eeprom(struct net_device *netdev,
@@ -574,6 +579,7 @@ static void e1000_get_drvinfo(struct net_device *netdev,
 			      struct ethtool_drvinfo *drvinfo)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	char firmware_version[32];
 	u16 eeprom_data;
 
@@ -582,8 +588,8 @@ static void e1000_get_drvinfo(struct net_device *netdev,
 
 	/* EEPROM image version # is reported as firmware version # for
 	 * 8257{1|2|3} controllers */
-	e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data);
-	switch (adapter->hw.mac_type) {
+	e1000_read_eeprom(hw, 5, 1, &eeprom_data);
+	switch (hw->mac_type) {
 	case e1000_82571:
 	case e1000_82572:
 	case e1000_82573:
@@ -608,7 +614,8 @@ static void e1000_get_ringparam(struct net_device *netdev,
 				struct ethtool_ringparam *ring)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	e1000_mac_type mac_type = adapter->hw.mac_type;
+	struct e1000_hw *hw = &adapter->hw;
+	e1000_mac_type mac_type = hw->mac_type;
 	struct e1000_tx_ring *txdr = adapter->tx_ring;
 	struct e1000_rx_ring *rxdr = adapter->rx_ring;
 
@@ -628,7 +635,8 @@ static int e1000_set_ringparam(struct net_device *netdev,
 			       struct ethtool_ringparam *ring)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	e1000_mac_type mac_type = adapter->hw.mac_type;
+	struct e1000_hw *hw = &adapter->hw;
+	e1000_mac_type mac_type = hw->mac_type;
 	struct e1000_tx_ring *txdr, *tx_old;
 	struct e1000_rx_ring *rxdr, *rx_old;
 	int i, err;
@@ -714,9 +722,10 @@ err_setup:
 static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
 			     u32 mask, u32 write)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	static const u32 test[] =
 		{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
-	u8 __iomem *address = adapter->hw.hw_addr + reg;
+	u8 __iomem *address = hw->hw_addr + reg;
 	u32 read;
 	int i;
 
@@ -737,7 +746,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
 static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
 			      u32 mask, u32 write)
 {
-	u8 __iomem *address = adapter->hw.hw_addr + reg;
+	struct e1000_hw *hw = &adapter->hw;
+	u8 __iomem *address = hw->hw_addr + reg;
 	u32 read;
 
 	writel(write & mask, address);
@@ -755,7 +765,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
 #define REG_PATTERN_TEST(reg, mask, write)			     \
 	do {							     \
 		if (reg_pattern_test(adapter, data,		     \
-			     (adapter->hw.mac_type >= e1000_82543)   \
+			     (hw->mac_type >= e1000_82543)   \
 			     ? E1000_##reg : E1000_82542_##reg,	     \
 			     mask, write))			     \
 			return 1;				     \
@@ -764,7 +774,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
 #define REG_SET_AND_CHECK(reg, mask, write)			     \
 	do {							     \
 		if (reg_set_and_check(adapter, data,		     \
-			      (adapter->hw.mac_type >= e1000_82543)  \
+			      (hw->mac_type >= e1000_82543)  \
 			      ? E1000_##reg : E1000_82542_##reg,     \
 			      mask, write))			     \
 			return 1;				     \
@@ -774,11 +784,12 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 {
 	u32 value, before, after;
 	u32 i, toggle;
+	struct e1000_hw *hw = &adapter->hw;
 
 	/* The status register is Read Only, so a write should fail.
 	 * Some bits that get toggled are ignored.
 	 */
-	switch (adapter->hw.mac_type) {
+	switch (hw->mac_type) {
 	/* there are several bits on newer hardware that are r/w */
 	case e1000_82571:
 	case e1000_82572:
@@ -794,10 +805,10 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 		break;
 	}
 
-	before = E1000_READ_REG(&adapter->hw, STATUS);
-	value = (E1000_READ_REG(&adapter->hw, STATUS) & toggle);
-	E1000_WRITE_REG(&adapter->hw, STATUS, toggle);
-	after = E1000_READ_REG(&adapter->hw, STATUS) & toggle;
+	before = er32(STATUS);
+	value = (er32(STATUS) & toggle);
+	ew32(STATUS, toggle);
+	after = er32(STATUS) & toggle;
 	if (value != after) {
 		DPRINTK(DRV, ERR, "failed STATUS register test got: "
 		        "0x%08X expected: 0x%08X\n", after, value);
@@ -805,9 +816,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 		return 1;
 	}
 	/* restore previous status */
-	E1000_WRITE_REG(&adapter->hw, STATUS, before);
+	ew32(STATUS, before);
 
-	if (adapter->hw.mac_type != e1000_ich8lan) {
+	if (hw->mac_type != e1000_ich8lan) {
 		REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
 		REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
 		REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
@@ -827,20 +838,20 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 	REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
 
-	before = (adapter->hw.mac_type == e1000_ich8lan ?
+	before = (hw->mac_type == e1000_ich8lan ?
 	          0x06C3B33E : 0x06DFB3FE);
 	REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
 	REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
 
-	if (adapter->hw.mac_type >= e1000_82543) {
+	if (hw->mac_type >= e1000_82543) {
 
 		REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
 		REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
-		if (adapter->hw.mac_type != e1000_ich8lan)
+		if (hw->mac_type != e1000_ich8lan)
 			REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
 		REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 		REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
-		value = (adapter->hw.mac_type == e1000_ich8lan ?
+		value = (hw->mac_type == e1000_ich8lan ?
 		         E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
 		for (i = 0; i < value; i++) {
 			REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
@@ -856,7 +867,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 	}
 
-	value = (adapter->hw.mac_type == e1000_ich8lan ?
+	value = (hw->mac_type == e1000_ich8lan ?
 			E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
 	for (i = 0; i < value; i++)
 		REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
@@ -867,6 +878,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u16 temp;
 	u16 checksum = 0;
 	u16 i;
@@ -874,7 +886,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
 	*data = 0;
 	/* Read and add up the contents of the EEPROM */
 	for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
-		if ((e1000_read_eeprom(&adapter->hw, i, 1, &temp)) < 0) {
+		if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) {
 			*data = 1;
 			break;
 		}
@@ -892,8 +904,9 @@ static irqreturn_t e1000_test_intr(int irq, void *data)
 {
 	struct net_device *netdev = (struct net_device *) data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 
-	adapter->test_icr |= E1000_READ_REG(&adapter->hw, ICR);
+	adapter->test_icr |= er32(ICR);
 
 	return IRQ_HANDLED;
 }
@@ -904,6 +917,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 	u32 mask, i = 0;
 	bool shared_int = true;
 	u32 irq = adapter->pdev->irq;
+	struct e1000_hw *hw = &adapter->hw;
 
 	*data = 0;
 
@@ -921,13 +935,13 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 	        (shared_int ? "shared" : "unshared"));
 
 	/* Disable all the interrupts */
-	E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF);
+	ew32(IMC, 0xFFFFFFFF);
 	msleep(10);
 
 	/* Test each interrupt */
 	for (; i < 10; i++) {
 
-		if (adapter->hw.mac_type == e1000_ich8lan && i == 8)
+		if (hw->mac_type == e1000_ich8lan && i == 8)
 			continue;
 
 		/* Interrupt to test */
@@ -941,8 +955,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 			 * test failed.
 			 */
 			adapter->test_icr = 0;
-			E1000_WRITE_REG(&adapter->hw, IMC, mask);
-			E1000_WRITE_REG(&adapter->hw, ICS, mask);
+			ew32(IMC, mask);
+			ew32(ICS, mask);
 			msleep(10);
 
 			if (adapter->test_icr & mask) {
@@ -958,8 +972,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 		 * test failed.
 		 */
 		adapter->test_icr = 0;
-		E1000_WRITE_REG(&adapter->hw, IMS, mask);
-		E1000_WRITE_REG(&adapter->hw, ICS, mask);
+		ew32(IMS, mask);
+		ew32(ICS, mask);
 		msleep(10);
 
 		if (!(adapter->test_icr & mask)) {
@@ -975,8 +989,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 			 * test failed.
 			 */
 			adapter->test_icr = 0;
-			E1000_WRITE_REG(&adapter->hw, IMC, ~mask & 0x00007FFF);
-			E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF);
+			ew32(IMC, ~mask & 0x00007FFF);
+			ew32(ICS, ~mask & 0x00007FFF);
 			msleep(10);
 
 			if (adapter->test_icr) {
@@ -987,7 +1001,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 	}
 
 	/* Disable all the interrupts */
-	E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF);
+	ew32(IMC, 0xFFFFFFFF);
 	msleep(10);
 
 	/* Unhook test interrupt handler */
@@ -1044,6 +1058,7 @@ static void e1000_free_desc_rings(struct e1000_adapter *adapter)
 
 static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
 	struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
 	struct pci_dev *pdev = adapter->pdev;
@@ -1072,17 +1087,14 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 	memset(txdr->desc, 0, txdr->size);
 	txdr->next_to_use = txdr->next_to_clean = 0;
 
-	E1000_WRITE_REG(&adapter->hw, TDBAL,
-			((u64) txdr->dma & 0x00000000FFFFFFFF));
-	E1000_WRITE_REG(&adapter->hw, TDBAH, ((u64) txdr->dma >> 32));
-	E1000_WRITE_REG(&adapter->hw, TDLEN,
-			txdr->count * sizeof(struct e1000_tx_desc));
-	E1000_WRITE_REG(&adapter->hw, TDH, 0);
-	E1000_WRITE_REG(&adapter->hw, TDT, 0);
-	E1000_WRITE_REG(&adapter->hw, TCTL,
-			E1000_TCTL_PSP | E1000_TCTL_EN |
-			E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
-			E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+	ew32(TDBAL, ((u64) txdr->dma & 0x00000000FFFFFFFF));
+	ew32(TDBAH, ((u64) txdr->dma >> 32));
+	ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc));
+	ew32(TDH, 0);
+	ew32(TDT, 0);
+	ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN |
+	     E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+	     E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
 
 	for (i = 0; i < txdr->count; i++) {
 		struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
@@ -1127,18 +1139,17 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 	memset(rxdr->desc, 0, rxdr->size);
 	rxdr->next_to_use = rxdr->next_to_clean = 0;
 
-	rctl = E1000_READ_REG(&adapter->hw, RCTL);
-	E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN);
-	E1000_WRITE_REG(&adapter->hw, RDBAL,
-			((u64) rxdr->dma & 0xFFFFFFFF));
-	E1000_WRITE_REG(&adapter->hw, RDBAH, ((u64) rxdr->dma >> 32));
-	E1000_WRITE_REG(&adapter->hw, RDLEN, rxdr->size);
-	E1000_WRITE_REG(&adapter->hw, RDH, 0);
-	E1000_WRITE_REG(&adapter->hw, RDT, 0);
+	rctl = er32(RCTL);
+	ew32(RCTL, rctl & ~E1000_RCTL_EN);
+	ew32(RDBAL, ((u64) rxdr->dma & 0xFFFFFFFF));
+	ew32(RDBAH, ((u64) rxdr->dma >> 32));
+	ew32(RDLEN, rxdr->size);
+	ew32(RDH, 0);
+	ew32(RDT, 0);
 	rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
 		E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
-		(adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
-	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+		(hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+	ew32(RCTL, rctl);
 
 	for (i = 0; i < rxdr->count; i++) {
 		struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
@@ -1168,68 +1179,72 @@ err_nomem:
 
 static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
+
 	/* Write out to PHY registers 29 and 30 to disable the Receiver. */
-	e1000_write_phy_reg(&adapter->hw, 29, 0x001F);
-	e1000_write_phy_reg(&adapter->hw, 30, 0x8FFC);
-	e1000_write_phy_reg(&adapter->hw, 29, 0x001A);
-	e1000_write_phy_reg(&adapter->hw, 30, 0x8FF0);
+	e1000_write_phy_reg(hw, 29, 0x001F);
+	e1000_write_phy_reg(hw, 30, 0x8FFC);
+	e1000_write_phy_reg(hw, 29, 0x001A);
+	e1000_write_phy_reg(hw, 30, 0x8FF0);
 }
 
 static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u16 phy_reg;
 
 	/* Because we reset the PHY above, we need to re-force TX_CLK in the
 	 * Extended PHY Specific Control Register to 25MHz clock.  This
 	 * value defaults back to a 2.5MHz clock when the PHY is reset.
 	 */
-	e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+	e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
 	phy_reg |= M88E1000_EPSCR_TX_CLK_25;
-	e1000_write_phy_reg(&adapter->hw,
+	e1000_write_phy_reg(hw,
 		M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
 
 	/* In addition, because of the s/w reset above, we need to enable
 	 * CRS on TX.  This must be set for both full and half duplex
 	 * operation.
 	 */
-	e1000_read_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+	e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
 	phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
-	e1000_write_phy_reg(&adapter->hw,
+	e1000_write_phy_reg(hw,
 		M88E1000_PHY_SPEC_CTRL, phy_reg);
 }
 
 static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl_reg;
 	u16 phy_reg;
 
 	/* Setup the Device Control Register for PHY loopback test. */
 
-	ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
+	ctrl_reg = er32(CTRL);
 	ctrl_reg |= (E1000_CTRL_ILOS |		/* Invert Loss-Of-Signal */
 		     E1000_CTRL_FRCSPD |	/* Set the Force Speed Bit */
 		     E1000_CTRL_FRCDPX |	/* Set the Force Duplex Bit */
 		     E1000_CTRL_SPD_1000 |	/* Force Speed to 1000 */
 		     E1000_CTRL_FD);		/* Force Duplex to FULL */
 
-	E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg);
+	ew32(CTRL, ctrl_reg);
 
 	/* Read the PHY Specific Control Register (0x10) */
-	e1000_read_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+	e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
 
 	/* Clear Auto-Crossover bits in PHY Specific Control Register
 	 * (bits 6:5).
 	 */
 	phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
-	e1000_write_phy_reg(&adapter->hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
+	e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
 
 	/* Perform software reset on the PHY */
-	e1000_phy_reset(&adapter->hw);
+	e1000_phy_reset(hw);
 
 	/* Have to setup TX_CLK and TX_CRS after software reset */
 	e1000_phy_reset_clk_and_crs(adapter);
 
-	e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8100);
+	e1000_write_phy_reg(hw, PHY_CTRL, 0x8100);
 
 	/* Wait for reset to complete. */
 	udelay(500);
@@ -1241,23 +1256,23 @@ static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
 	e1000_phy_disable_receiver(adapter);
 
 	/* Set the loopback bit in the PHY control register. */
-	e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
+	e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
 	phy_reg |= MII_CR_LOOPBACK;
-	e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
+	e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
 
 	/* Setup TX_CLK and TX_CRS one more time. */
 	e1000_phy_reset_clk_and_crs(adapter);
 
 	/* Check Phy Configuration */
-	e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
+	e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
 	if (phy_reg != 0x4100)
 		 return 9;
 
-	e1000_read_phy_reg(&adapter->hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+	e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
 	if (phy_reg != 0x0070)
 		return 10;
 
-	e1000_read_phy_reg(&adapter->hw, 29, &phy_reg);
+	e1000_read_phy_reg(hw, 29, &phy_reg);
 	if (phy_reg != 0x001A)
 		return 11;
 
@@ -1266,29 +1281,30 @@ static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
 
 static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl_reg = 0;
 	u32 stat_reg = 0;
 
-	adapter->hw.autoneg = false;
+	hw->autoneg = false;
 
-	if (adapter->hw.phy_type == e1000_phy_m88) {
+	if (hw->phy_type == e1000_phy_m88) {
 		/* Auto-MDI/MDIX Off */
-		e1000_write_phy_reg(&adapter->hw,
+		e1000_write_phy_reg(hw,
 				    M88E1000_PHY_SPEC_CTRL, 0x0808);
 		/* reset to update Auto-MDI/MDIX */
-		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x9140);
+		e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
 		/* autoneg off */
-		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8140);
-	} else if (adapter->hw.phy_type == e1000_phy_gg82563)
-		e1000_write_phy_reg(&adapter->hw,
+		e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
+	} else if (hw->phy_type == e1000_phy_gg82563)
+		e1000_write_phy_reg(hw,
 		                    GG82563_PHY_KMRN_MODE_CTRL,
 		                    0x1CC);
 
-	ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
+	ctrl_reg = er32(CTRL);
 
-	if (adapter->hw.phy_type == e1000_phy_ife) {
+	if (hw->phy_type == e1000_phy_ife) {
 		/* force 100, set loopback */
-		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x6100);
+		e1000_write_phy_reg(hw, PHY_CTRL, 0x6100);
 
 		/* Now set up the MAC to the same speed/duplex as the PHY. */
 		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
@@ -1298,10 +1314,10 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
 	} else {
 		/* force 1000, set loopback */
-		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
+		e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
 
 		/* Now set up the MAC to the same speed/duplex as the PHY. */
-		ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
+		ctrl_reg = er32(CTRL);
 		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
 		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
 			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
@@ -1309,23 +1325,23 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
 	}
 
-	if (adapter->hw.media_type == e1000_media_type_copper &&
-	   adapter->hw.phy_type == e1000_phy_m88)
+	if (hw->media_type == e1000_media_type_copper &&
+	   hw->phy_type == e1000_phy_m88)
 		ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
 	else {
 		/* Set the ILOS bit on the fiber Nic is half
 		 * duplex link is detected. */
-		stat_reg = E1000_READ_REG(&adapter->hw, STATUS);
+		stat_reg = er32(STATUS);
 		if ((stat_reg & E1000_STATUS_FD) == 0)
 			ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
 	}
 
-	E1000_WRITE_REG(&adapter->hw, CTRL, ctrl_reg);
+	ew32(CTRL, ctrl_reg);
 
 	/* Disable the receiver on the PHY so when a cable is plugged in, the
 	 * PHY does not begin to autoneg when a cable is reconnected to the NIC.
 	 */
-	if (adapter->hw.phy_type == e1000_phy_m88)
+	if (hw->phy_type == e1000_phy_m88)
 		e1000_phy_disable_receiver(adapter);
 
 	udelay(500);
@@ -1335,12 +1351,13 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 
 static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u16 phy_reg = 0;
 	u16 count = 0;
 
-	switch (adapter->hw.mac_type) {
+	switch (hw->mac_type) {
 	case e1000_82543:
-		if (adapter->hw.media_type == e1000_media_type_copper) {
+		if (hw->media_type == e1000_media_type_copper) {
 			/* Attempt to setup Loopback mode on Non-integrated PHY.
 			 * Some PHY registers get corrupted at random, so
 			 * attempt this 10 times.
@@ -1374,9 +1391,9 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
 		/* Default PHY loopback work is to read the MII
 		 * control register and assert bit 14 (loopback mode).
 		 */
-		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
+		e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
 		phy_reg |= MII_CR_LOOPBACK;
-		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
+		e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
 		return 0;
 		break;
 	}
@@ -1402,14 +1419,14 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
 		case e1000_82572:
 #define E1000_SERDES_LB_ON 0x410
 			e1000_set_phy_loopback(adapter);
-			E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON);
+			ew32(SCTL, E1000_SERDES_LB_ON);
 			msleep(10);
 			return 0;
 			break;
 		default:
-			rctl = E1000_READ_REG(hw, RCTL);
+			rctl = er32(RCTL);
 			rctl |= E1000_RCTL_LBM_TCVR;
-			E1000_WRITE_REG(hw, RCTL, rctl);
+			ew32(RCTL, rctl);
 			return 0;
 		}
 	} else if (hw->media_type == e1000_media_type_copper)
@@ -1424,9 +1441,9 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 	u32 rctl;
 	u16 phy_reg;
 
-	rctl = E1000_READ_REG(hw, RCTL);
+	rctl = er32(RCTL);
 	rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
-	E1000_WRITE_REG(hw, RCTL, rctl);
+	ew32(RCTL, rctl);
 
 	switch (hw->mac_type) {
 	case e1000_82571:
@@ -1434,7 +1451,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 		if (hw->media_type == e1000_media_type_fiber ||
 		    hw->media_type == e1000_media_type_internal_serdes) {
 #define E1000_SERDES_LB_OFF 0x400
-			E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF);
+			ew32(SCTL, E1000_SERDES_LB_OFF);
 			msleep(10);
 			break;
 		}
@@ -1484,13 +1501,14 @@ static int e1000_check_lbtest_frame(struct sk_buff *skb,
 
 static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
 	struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
 	struct pci_dev *pdev = adapter->pdev;
 	int i, j, k, l, lc, good_cnt, ret_val=0;
 	unsigned long time;
 
-	E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1);
+	ew32(RDT, rxdr->count - 1);
 
 	/* Calculate the loop count based on the largest descriptor ring
 	 * The idea is to wrap the largest ring a number of times using 64
@@ -1513,7 +1531,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 				    	PCI_DMA_TODEVICE);
 			if (unlikely(++k == txdr->count)) k = 0;
 		}
-		E1000_WRITE_REG(&adapter->hw, TDT, k);
+		ew32(TDT, k);
 		msleep(200);
 		time = jiffies; /* set the start time for the receive */
 		good_cnt = 0;
@@ -1548,9 +1566,11 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 
 static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
 {
+	struct e1000_hw *hw = &adapter->hw;
+
 	/* PHY loopback cannot be performed if SoL/IDER
 	 * sessions are active */
-	if (e1000_check_phy_reset_block(&adapter->hw)) {
+	if (e1000_check_phy_reset_block(hw)) {
 		DPRINTK(DRV, ERR, "Cannot do PHY loopback test "
 		        "when SoL/IDER is active.\n");
 		*data = 0;
@@ -1572,27 +1592,28 @@ out:
 
 static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	*data = 0;
-	if (adapter->hw.media_type == e1000_media_type_internal_serdes) {
+	if (hw->media_type == e1000_media_type_internal_serdes) {
 		int i = 0;
-		adapter->hw.serdes_link_down = true;
+		hw->serdes_link_down = true;
 
 		/* On some blade server designs, link establishment
 		 * could take as long as 2-3 minutes */
 		do {
-			e1000_check_for_link(&adapter->hw);
-			if (!adapter->hw.serdes_link_down)
+			e1000_check_for_link(hw);
+			if (!hw->serdes_link_down)
 				return *data;
 			msleep(20);
 		} while (i++ < 3750);
 
 		*data = 1;
 	} else {
-		e1000_check_for_link(&adapter->hw);
-		if (adapter->hw.autoneg)  /* if auto_neg is set wait for it */
+		e1000_check_for_link(hw);
+		if (hw->autoneg)  /* if auto_neg is set wait for it */
 			msleep(4000);
 
-		if (!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) {
+		if (!(er32(STATUS) & E1000_STATUS_LU)) {
 			*data = 1;
 		}
 	}
@@ -1615,6 +1636,7 @@ static void e1000_diag_test(struct net_device *netdev,
 			    struct ethtool_test *eth_test, u64 *data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	bool if_running = netif_running(netdev);
 
 	set_bit(__E1000_TESTING, &adapter->flags);
@@ -1622,9 +1644,9 @@ static void e1000_diag_test(struct net_device *netdev,
 		/* Offline tests */
 
 		/* save speed, duplex, autoneg settings */
-		u16 autoneg_advertised = adapter->hw.autoneg_advertised;
-		u8 forced_speed_duplex = adapter->hw.forced_speed_duplex;
-		u8 autoneg = adapter->hw.autoneg;
+		u16 autoneg_advertised = hw->autoneg_advertised;
+		u8 forced_speed_duplex = hw->forced_speed_duplex;
+		u8 autoneg = hw->autoneg;
 
 		DPRINTK(HW, INFO, "offline testing starting\n");
 
@@ -1657,9 +1679,9 @@ static void e1000_diag_test(struct net_device *netdev,
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		/* restore speed, duplex, autoneg settings */
-		adapter->hw.autoneg_advertised = autoneg_advertised;
-		adapter->hw.forced_speed_duplex = forced_speed_duplex;
-		adapter->hw.autoneg = autoneg;
+		hw->autoneg_advertised = autoneg_advertised;
+		hw->forced_speed_duplex = forced_speed_duplex;
+		hw->autoneg = autoneg;
 
 		e1000_reset(adapter);
 		clear_bit(__E1000_TESTING, &adapter->flags);
@@ -1708,7 +1730,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter,
 	case E1000_DEV_ID_82571EB_SERDES:
 	case E1000_DEV_ID_82571EB_COPPER:
 		/* Wake events not supported on port B */
-		if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) {
+		if (er32(STATUS) & E1000_STATUS_FUNC_1) {
 			wol->supported = 0;
 			break;
 		}
@@ -1732,7 +1754,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter,
 		/* dual port cards only support WoL on port A from now on
 		 * unless it was enabled in the eeprom for port B
 		 * so exclude FUNC_1 ports from having WoL enabled */
-		if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1 &&
+		if (er32(STATUS) & E1000_STATUS_FUNC_1 &&
 		    !adapter->eeprom_wol) {
 			wol->supported = 0;
 			break;
@@ -1748,6 +1770,7 @@ static void e1000_get_wol(struct net_device *netdev,
 			  struct ethtool_wolinfo *wol)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 
 	wol->supported = WAKE_UCAST | WAKE_MCAST |
 	                 WAKE_BCAST | WAKE_MAGIC;
@@ -1759,7 +1782,7 @@ static void e1000_get_wol(struct net_device *netdev,
 		return;
 
 	/* apply any specific unsupported masks here */
-	switch (adapter->hw.device_id) {
+	switch (hw->device_id) {
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
 		/* KSP3 does not suppport UCAST wake-ups */
 		wol->supported &= ~WAKE_UCAST;
@@ -1831,11 +1854,12 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 static void e1000_led_blink_callback(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+	struct e1000_hw *hw = &adapter->hw;
 
 	if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
-		e1000_led_off(&adapter->hw);
+		e1000_led_off(hw);
 	else
-		e1000_led_on(&adapter->hw);
+		e1000_led_on(hw);
 
 	mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
 }
@@ -1843,21 +1867,22 @@ static void e1000_led_blink_callback(unsigned long data)
 static int e1000_phys_id(struct net_device *netdev, u32 data)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 
 	if (!data)
 		data = INT_MAX;
 
-	if (adapter->hw.mac_type < e1000_82571) {
+	if (hw->mac_type < e1000_82571) {
 		if (!adapter->blink_timer.function) {
 			init_timer(&adapter->blink_timer);
 			adapter->blink_timer.function = e1000_led_blink_callback;
 			adapter->blink_timer.data = (unsigned long) adapter;
 		}
-		e1000_setup_led(&adapter->hw);
+		e1000_setup_led(hw);
 		mod_timer(&adapter->blink_timer, jiffies);
 		msleep_interruptible(data * 1000);
 		del_timer_sync(&adapter->blink_timer);
-	} else if (adapter->hw.phy_type == e1000_phy_ife) {
+	} else if (hw->phy_type == e1000_phy_ife) {
 		if (!adapter->blink_timer.function) {
 			init_timer(&adapter->blink_timer);
 			adapter->blink_timer.function = e1000_led_blink_callback;
@@ -1868,13 +1893,13 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 		del_timer_sync(&adapter->blink_timer);
 		e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
 	} else {
-		e1000_blink_led_start(&adapter->hw);
+		e1000_blink_led_start(hw);
 		msleep_interruptible(data * 1000);
 	}
 
-	e1000_led_off(&adapter->hw);
+	e1000_led_off(hw);
 	clear_bit(E1000_LED_ON, &adapter->led_status);
-	e1000_cleanup_led(&adapter->hw);
+	e1000_cleanup_led(hw);
 
 	return 0;
 }
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index d6c272ae437..5d3c2bd7b61 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -520,7 +520,7 @@ void e1000_set_media_type(struct e1000_hw *hw)
             hw->media_type = e1000_media_type_copper;
             break;
         default:
-            status = E1000_READ_REG(hw, STATUS);
+            status = er32(STATUS);
             if (status & E1000_STATUS_TBIMODE) {
                 hw->media_type = e1000_media_type_fiber;
                 /* tbi_compatibility not valid on fiber */
@@ -568,15 +568,15 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
 
     /* Clear interrupt mask to stop board from generating interrupts */
     DEBUGOUT("Masking off all interrupts\n");
-    E1000_WRITE_REG(hw, IMC, 0xffffffff);
+    ew32(IMC, 0xffffffff);
 
     /* Disable the Transmit and Receive units.  Then delay to allow
      * any pending transactions to complete before we hit the MAC with
      * the global reset.
      */
-    E1000_WRITE_REG(hw, RCTL, 0);
-    E1000_WRITE_REG(hw, TCTL, E1000_TCTL_PSP);
-    E1000_WRITE_FLUSH(hw);
+    ew32(RCTL, 0);
+    ew32(TCTL, E1000_TCTL_PSP);
+    E1000_WRITE_FLUSH();
 
     /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
     hw->tbi_compatibility_on = false;
@@ -586,11 +586,11 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
      */
     msleep(10);
 
-    ctrl = E1000_READ_REG(hw, CTRL);
+    ctrl = er32(CTRL);
 
     /* Must reset the PHY before resetting the MAC */
     if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
-        E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST));
+        ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
         msleep(5);
     }
 
@@ -599,12 +599,12 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
     if (hw->mac_type == e1000_82573) {
         timeout = 10;
 
-        extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+        extcnf_ctrl = er32(EXTCNF_CTRL);
         extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
 
         do {
-            E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
-            extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+            ew32(EXTCNF_CTRL, extcnf_ctrl);
+            extcnf_ctrl = er32(EXTCNF_CTRL);
 
             if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
                 break;
@@ -619,9 +619,9 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
     /* Workaround for ICH8 bit corruption issue in FIFO memory */
     if (hw->mac_type == e1000_ich8lan) {
         /* Set Tx and Rx buffer allocation to 8k apiece. */
-        E1000_WRITE_REG(hw, PBA, E1000_PBA_8K);
+        ew32(PBA, E1000_PBA_8K);
         /* Set Packet Buffer Size to 16k. */
-        E1000_WRITE_REG(hw, PBS, E1000_PBS_16K);
+        ew32(PBS, E1000_PBS_16K);
     }
 
     /* Issue a global reset to the MAC.  This will reset the chip's
@@ -645,7 +645,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
         case e1000_82545_rev_3:
         case e1000_82546_rev_3:
             /* Reset is performed on a shadow of the control register */
-            E1000_WRITE_REG(hw, CTRL_DUP, (ctrl | E1000_CTRL_RST));
+            ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
             break;
         case e1000_ich8lan:
             if (!hw->phy_reset_disable &&
@@ -658,11 +658,11 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
             }
 
             e1000_get_software_flag(hw);
-            E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
+            ew32(CTRL, (ctrl | E1000_CTRL_RST));
             msleep(5);
             break;
         default:
-            E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
+            ew32(CTRL, (ctrl | E1000_CTRL_RST));
             break;
     }
 
@@ -677,10 +677,10 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
         case e1000_82544:
             /* Wait for reset to complete */
             udelay(10);
-            ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+            ctrl_ext = er32(CTRL_EXT);
             ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-            E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
-            E1000_WRITE_FLUSH(hw);
+            ew32(CTRL_EXT, ctrl_ext);
+            E1000_WRITE_FLUSH();
             /* Wait for EEPROM reload */
             msleep(2);
             break;
@@ -694,10 +694,10 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
         case e1000_82573:
             if (!e1000_is_onboard_nvm_eeprom(hw)) {
                 udelay(10);
-                ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+                ctrl_ext = er32(CTRL_EXT);
                 ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-                E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
-                E1000_WRITE_FLUSH(hw);
+                ew32(CTRL_EXT, ctrl_ext);
+                E1000_WRITE_FLUSH();
             }
             /* fall through */
         default:
@@ -710,27 +710,27 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
 
     /* Disable HW ARPs on ASF enabled adapters */
     if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) {
-        manc = E1000_READ_REG(hw, MANC);
+        manc = er32(MANC);
         manc &= ~(E1000_MANC_ARP_EN);
-        E1000_WRITE_REG(hw, MANC, manc);
+        ew32(MANC, manc);
     }
 
     if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
         e1000_phy_init_script(hw);
 
         /* Configure activity LED after PHY reset */
-        led_ctrl = E1000_READ_REG(hw, LEDCTL);
+        led_ctrl = er32(LEDCTL);
         led_ctrl &= IGP_ACTIVITY_LED_MASK;
         led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
-        E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
+        ew32(LEDCTL, led_ctrl);
     }
 
     /* Clear interrupt mask to stop board from generating interrupts */
     DEBUGOUT("Masking off all interrupts\n");
-    E1000_WRITE_REG(hw, IMC, 0xffffffff);
+    ew32(IMC, 0xffffffff);
 
     /* Clear any pending interrupt events. */
-    icr = E1000_READ_REG(hw, ICR);
+    icr = er32(ICR);
 
     /* If MWI was previously enabled, reenable it. */
     if (hw->mac_type == e1000_82542_rev2_0) {
@@ -739,9 +739,9 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
     }
 
     if (hw->mac_type == e1000_ich8lan) {
-        u32 kab = E1000_READ_REG(hw, KABGTXD);
+        u32 kab = er32(KABGTXD);
         kab |= E1000_KABGTXD_BGSQLBIAS;
-        E1000_WRITE_REG(hw, KABGTXD, kab);
+        ew32(KABGTXD, kab);
     }
 
     return E1000_SUCCESS;
@@ -766,22 +766,22 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
         u32 reg_txdctl, reg_txdctl1;
 
         /* link autonegotiation/sync workarounds */
-        reg_tarc0 = E1000_READ_REG(hw, TARC0);
+        reg_tarc0 = er32(TARC0);
         reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27));
 
         /* Enable not-done TX descriptor counting */
-        reg_txdctl = E1000_READ_REG(hw, TXDCTL);
+        reg_txdctl = er32(TXDCTL);
         reg_txdctl |= E1000_TXDCTL_COUNT_DESC;
-        E1000_WRITE_REG(hw, TXDCTL, reg_txdctl);
-        reg_txdctl1 = E1000_READ_REG(hw, TXDCTL1);
+        ew32(TXDCTL, reg_txdctl);
+        reg_txdctl1 = er32(TXDCTL1);
         reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC;
-        E1000_WRITE_REG(hw, TXDCTL1, reg_txdctl1);
+        ew32(TXDCTL1, reg_txdctl1);
 
         switch (hw->mac_type) {
             case e1000_82571:
             case e1000_82572:
                 /* Clear PHY TX compatible mode bits */
-                reg_tarc1 = E1000_READ_REG(hw, TARC1);
+                reg_tarc1 = er32(TARC1);
                 reg_tarc1 &= ~((1 << 30)|(1 << 29));
 
                 /* link autonegotiation/sync workarounds */
@@ -791,25 +791,25 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
                 reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24));
 
                 /* Multiple read bit is reversed polarity */
-                reg_tctl = E1000_READ_REG(hw, TCTL);
+                reg_tctl = er32(TCTL);
                 if (reg_tctl & E1000_TCTL_MULR)
                     reg_tarc1 &= ~(1 << 28);
                 else
                     reg_tarc1 |= (1 << 28);
 
-                E1000_WRITE_REG(hw, TARC1, reg_tarc1);
+                ew32(TARC1, reg_tarc1);
                 break;
             case e1000_82573:
-                reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+                reg_ctrl_ext = er32(CTRL_EXT);
                 reg_ctrl_ext &= ~(1 << 23);
                 reg_ctrl_ext |= (1 << 22);
 
                 /* TX byte count fix */
-                reg_ctrl = E1000_READ_REG(hw, CTRL);
+                reg_ctrl = er32(CTRL);
                 reg_ctrl &= ~(1 << 29);
 
-                E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext);
-                E1000_WRITE_REG(hw, CTRL, reg_ctrl);
+                ew32(CTRL_EXT, reg_ctrl_ext);
+                ew32(CTRL, reg_ctrl);
                 break;
             case e1000_80003es2lan:
                 /* improve small packet performace for fiber/serdes */
@@ -819,14 +819,14 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
                 }
 
                 /* Multiple read bit is reversed polarity */
-                reg_tctl = E1000_READ_REG(hw, TCTL);
-                reg_tarc1 = E1000_READ_REG(hw, TARC1);
+                reg_tctl = er32(TCTL);
+                reg_tarc1 = er32(TARC1);
                 if (reg_tctl & E1000_TCTL_MULR)
                     reg_tarc1 &= ~(1 << 28);
                 else
                     reg_tarc1 |= (1 << 28);
 
-                E1000_WRITE_REG(hw, TARC1, reg_tarc1);
+                ew32(TARC1, reg_tarc1);
                 break;
             case e1000_ich8lan:
                 /* Reduce concurrent DMA requests to 3 from 4 */
@@ -835,16 +835,16 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
                      (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))
                     reg_tarc0 |= ((1 << 29)|(1 << 28));
 
-                reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+                reg_ctrl_ext = er32(CTRL_EXT);
                 reg_ctrl_ext |= (1 << 22);
-                E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext);
+                ew32(CTRL_EXT, reg_ctrl_ext);
 
                 /* workaround TX hang with TSO=on */
                 reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23));
 
                 /* Multiple read bit is reversed polarity */
-                reg_tctl = E1000_READ_REG(hw, TCTL);
-                reg_tarc1 = E1000_READ_REG(hw, TARC1);
+                reg_tctl = er32(TCTL);
+                reg_tarc1 = er32(TARC1);
                 if (reg_tctl & E1000_TCTL_MULR)
                     reg_tarc1 &= ~(1 << 28);
                 else
@@ -853,13 +853,13 @@ static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
                 /* workaround TX hang with TSO=on */
                 reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24));
 
-                E1000_WRITE_REG(hw, TARC1, reg_tarc1);
+                ew32(TARC1, reg_tarc1);
                 break;
             default:
                 break;
         }
 
-        E1000_WRITE_REG(hw, TARC0, reg_tarc0);
+        ew32(TARC0, reg_tarc0);
     }
 }
 
@@ -890,9 +890,9 @@ s32 e1000_init_hw(struct e1000_hw *hw)
         ((hw->revision_id < 3) ||
          ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
           (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) {
-            reg_data = E1000_READ_REG(hw, STATUS);
+            reg_data = er32(STATUS);
             reg_data &= ~0x80000000;
-            E1000_WRITE_REG(hw, STATUS, reg_data);
+            ew32(STATUS, reg_data);
     }
 
     /* Initialize Identification LED */
@@ -913,7 +913,7 @@ s32 e1000_init_hw(struct e1000_hw *hw)
     /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
     if (hw->mac_type != e1000_ich8lan) {
         if (hw->mac_type < e1000_82545_rev_3)
-            E1000_WRITE_REG(hw, VET, 0);
+            ew32(VET, 0);
         e1000_clear_vfta(hw);
     }
 
@@ -921,8 +921,8 @@ s32 e1000_init_hw(struct e1000_hw *hw)
     if (hw->mac_type == e1000_82542_rev2_0) {
         DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
         e1000_pci_clear_mwi(hw);
-        E1000_WRITE_REG(hw, RCTL, E1000_RCTL_RST);
-        E1000_WRITE_FLUSH(hw);
+        ew32(RCTL, E1000_RCTL_RST);
+        E1000_WRITE_FLUSH();
         msleep(5);
     }
 
@@ -933,8 +933,8 @@ s32 e1000_init_hw(struct e1000_hw *hw)
 
     /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
     if (hw->mac_type == e1000_82542_rev2_0) {
-        E1000_WRITE_REG(hw, RCTL, 0);
-        E1000_WRITE_FLUSH(hw);
+        ew32(RCTL, 0);
+        E1000_WRITE_FLUSH();
         msleep(1);
         if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
             e1000_pci_set_mwi(hw);
@@ -949,7 +949,7 @@ s32 e1000_init_hw(struct e1000_hw *hw)
         E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
         /* use write flush to prevent Memory Write Block (MWB) from
          * occuring when accessing our register space */
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
     }
 
     /* Set the PCI priority bit correctly in the CTRL register.  This
@@ -958,8 +958,8 @@ s32 e1000_init_hw(struct e1000_hw *hw)
      * 82542 and 82543 silicon.
      */
     if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
-        ctrl = E1000_READ_REG(hw, CTRL);
-        E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR);
+        ctrl = er32(CTRL);
+        ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
     }
 
     switch (hw->mac_type) {
@@ -982,9 +982,9 @@ s32 e1000_init_hw(struct e1000_hw *hw)
 
     /* Set the transmit descriptor write-back policy */
     if (hw->mac_type > e1000_82544) {
-        ctrl = E1000_READ_REG(hw, TXDCTL);
+        ctrl = er32(TXDCTL);
         ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
-        E1000_WRITE_REG(hw, TXDCTL, ctrl);
+        ew32(TXDCTL, ctrl);
     }
 
     if (hw->mac_type == e1000_82573) {
@@ -996,21 +996,21 @@ s32 e1000_init_hw(struct e1000_hw *hw)
         break;
     case e1000_80003es2lan:
         /* Enable retransmit on late collisions */
-        reg_data = E1000_READ_REG(hw, TCTL);
+        reg_data = er32(TCTL);
         reg_data |= E1000_TCTL_RTLC;
-        E1000_WRITE_REG(hw, TCTL, reg_data);
+        ew32(TCTL, reg_data);
 
         /* Configure Gigabit Carry Extend Padding */
-        reg_data = E1000_READ_REG(hw, TCTL_EXT);
+        reg_data = er32(TCTL_EXT);
         reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
         reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX;
-        E1000_WRITE_REG(hw, TCTL_EXT, reg_data);
+        ew32(TCTL_EXT, reg_data);
 
         /* Configure Transmit Inter-Packet Gap */
-        reg_data = E1000_READ_REG(hw, TIPG);
+        reg_data = er32(TIPG);
         reg_data &= ~E1000_TIPG_IPGT_MASK;
         reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
-        E1000_WRITE_REG(hw, TIPG, reg_data);
+        ew32(TIPG, reg_data);
 
         reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001);
         reg_data &= ~0x00100000;
@@ -1019,17 +1019,17 @@ s32 e1000_init_hw(struct e1000_hw *hw)
     case e1000_82571:
     case e1000_82572:
     case e1000_ich8lan:
-        ctrl = E1000_READ_REG(hw, TXDCTL1);
+        ctrl = er32(TXDCTL1);
         ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
-        E1000_WRITE_REG(hw, TXDCTL1, ctrl);
+        ew32(TXDCTL1, ctrl);
         break;
     }
 
 
     if (hw->mac_type == e1000_82573) {
-        u32 gcr = E1000_READ_REG(hw, GCR);
+        u32 gcr = er32(GCR);
         gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
-        E1000_WRITE_REG(hw, GCR, gcr);
+        ew32(GCR, gcr);
     }
 
     /* Clear all of the statistics registers (clear on read).  It is
@@ -1046,11 +1046,11 @@ s32 e1000_init_hw(struct e1000_hw *hw)
 
     if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
         hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
-        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext = er32(CTRL_EXT);
         /* Relaxed ordering must be disabled to avoid a parity
          * error crash in a PCI slot. */
         ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
-        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+        ew32(CTRL_EXT, ctrl_ext);
     }
 
     return ret_val;
@@ -1181,7 +1181,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
         }
         ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
                     SWDPIO__EXT_SHIFT);
-        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+        ew32(CTRL_EXT, ctrl_ext);
     }
 
     /* Call the necessary subroutine to configure the link. */
@@ -1198,12 +1198,12 @@ s32 e1000_setup_link(struct e1000_hw *hw)
 
     /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */
     if (hw->mac_type != e1000_ich8lan) {
-        E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
-        E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
-        E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
+        ew32(FCT, FLOW_CONTROL_TYPE);
+        ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+        ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
     }
 
-    E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time);
+    ew32(FCTTV, hw->fc_pause_time);
 
     /* Set the flow control receive threshold registers.  Normally,
      * these registers will be set to a default threshold that may be
@@ -1212,18 +1212,18 @@ s32 e1000_setup_link(struct e1000_hw *hw)
      * registers will be set to 0.
      */
     if (!(hw->fc & E1000_FC_TX_PAUSE)) {
-        E1000_WRITE_REG(hw, FCRTL, 0);
-        E1000_WRITE_REG(hw, FCRTH, 0);
+        ew32(FCRTL, 0);
+        ew32(FCRTH, 0);
     } else {
         /* We need to set up the Receive Threshold high and low water marks
          * as well as (optionally) enabling the transmission of XON frames.
          */
         if (hw->fc_send_xon) {
-            E1000_WRITE_REG(hw, FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
-            E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water);
+            ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
+            ew32(FCRTH, hw->fc_high_water);
         } else {
-            E1000_WRITE_REG(hw, FCRTL, hw->fc_low_water);
-            E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water);
+            ew32(FCRTL, hw->fc_low_water);
+            ew32(FCRTH, hw->fc_high_water);
         }
     }
     return ret_val;
@@ -1255,7 +1255,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
      * loopback mode is disabled during initialization.
      */
     if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572)
-        E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK);
+        ew32(SCTL, E1000_DISABLE_SERDES_LOOPBACK);
 
     /* On adapters with a MAC newer than 82544, SWDP 1 will be
      * set when the optics detect a signal. On older adapters, it will be
@@ -1263,7 +1263,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
      * If we're on serdes media, adjust the output amplitude to value
      * set in the EEPROM.
      */
-    ctrl = E1000_READ_REG(hw, CTRL);
+    ctrl = er32(CTRL);
     if (hw->media_type == e1000_media_type_fiber)
         signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
 
@@ -1334,9 +1334,9 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
      */
     DEBUGOUT("Auto-negotiation enabled\n");
 
-    E1000_WRITE_REG(hw, TXCW, txcw);
-    E1000_WRITE_REG(hw, CTRL, ctrl);
-    E1000_WRITE_FLUSH(hw);
+    ew32(TXCW, txcw);
+    ew32(CTRL, ctrl);
+    E1000_WRITE_FLUSH();
 
     hw->txcw = txcw;
     msleep(1);
@@ -1348,11 +1348,11 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
      * For internal serdes, we just assume a signal is present, then poll.
      */
     if (hw->media_type == e1000_media_type_internal_serdes ||
-       (E1000_READ_REG(hw, CTRL) & E1000_CTRL_SWDPIN1) == signal) {
+       (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
         DEBUGOUT("Looking for Link\n");
         for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
             msleep(10);
-            status = E1000_READ_REG(hw, STATUS);
+            status = er32(STATUS);
             if (status & E1000_STATUS_LU) break;
         }
         if (i == (LINK_UP_TIMEOUT / 10)) {
@@ -1392,7 +1392,7 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
 
     DEBUGFUNC("e1000_copper_link_preconfig");
 
-    ctrl = E1000_READ_REG(hw, CTRL);
+    ctrl = er32(CTRL);
     /* With 82543, we need to force speed and duplex on the MAC equal to what
      * the PHY speed and duplex configuration is. In addition, we need to
      * perform a hardware reset on the PHY to take it out of reset.
@@ -1400,10 +1400,10 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
     if (hw->mac_type > e1000_82543) {
         ctrl |= E1000_CTRL_SLU;
         ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-        E1000_WRITE_REG(hw, CTRL, ctrl);
+        ew32(CTRL, ctrl);
     } else {
         ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
-        E1000_WRITE_REG(hw, CTRL, ctrl);
+        ew32(CTRL, ctrl);
         ret_val = e1000_phy_hw_reset(hw);
         if (ret_val)
             return ret_val;
@@ -1464,10 +1464,10 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
     msleep(15);
     if (hw->mac_type != e1000_ich8lan) {
     /* Configure activity LED after PHY reset */
-    led_ctrl = E1000_READ_REG(hw, LEDCTL);
+    led_ctrl = er32(LEDCTL);
     led_ctrl &= IGP_ACTIVITY_LED_MASK;
     led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
-    E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
+    ew32(LEDCTL, led_ctrl);
     }
 
     /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
@@ -1680,9 +1680,9 @@ static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw)
         if (ret_val)
             return ret_val;
 
-        reg_data = E1000_READ_REG(hw, CTRL_EXT);
+        reg_data = er32(CTRL_EXT);
         reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
-        E1000_WRITE_REG(hw, CTRL_EXT, reg_data);
+        ew32(CTRL_EXT, reg_data);
 
         ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
                                           &phy_data);
@@ -2074,10 +2074,10 @@ static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
         return ret_val;
 
     /* Configure Transmit Inter-Packet Gap */
-    tipg = E1000_READ_REG(hw, TIPG);
+    tipg = er32(TIPG);
     tipg &= ~E1000_TIPG_IPGT_MASK;
     tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
-    E1000_WRITE_REG(hw, TIPG, tipg);
+    ew32(TIPG, tipg);
 
     ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
 
@@ -2109,10 +2109,10 @@ static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
         return ret_val;
 
     /* Configure Transmit Inter-Packet Gap */
-    tipg = E1000_READ_REG(hw, TIPG);
+    tipg = er32(TIPG);
     tipg &= ~E1000_TIPG_IPGT_MASK;
     tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
-    E1000_WRITE_REG(hw, TIPG, tipg);
+    ew32(TIPG, tipg);
 
     ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
 
@@ -2295,7 +2295,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
     DEBUGOUT1("hw->fc = %d\n", hw->fc);
 
     /* Read the Device Control Register. */
-    ctrl = E1000_READ_REG(hw, CTRL);
+    ctrl = er32(CTRL);
 
     /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
     ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
@@ -2350,7 +2350,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
     e1000_config_collision_dist(hw);
 
     /* Write the configured values back to the Device Control Reg. */
-    E1000_WRITE_REG(hw, CTRL, ctrl);
+    ew32(CTRL, ctrl);
 
     if ((hw->phy_type == e1000_phy_m88) ||
         (hw->phy_type == e1000_phy_gg82563)) {
@@ -2539,13 +2539,13 @@ void e1000_config_collision_dist(struct e1000_hw *hw)
     else
         coll_dist = E1000_COLLISION_DISTANCE;
 
-    tctl = E1000_READ_REG(hw, TCTL);
+    tctl = er32(TCTL);
 
     tctl &= ~E1000_TCTL_COLD;
     tctl |= coll_dist << E1000_COLD_SHIFT;
 
-    E1000_WRITE_REG(hw, TCTL, tctl);
-    E1000_WRITE_FLUSH(hw);
+    ew32(TCTL, tctl);
+    E1000_WRITE_FLUSH();
 }
 
 /******************************************************************************
@@ -2573,7 +2573,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
     /* Read the Device Control Register and set the bits to Force Speed
      * and Duplex.
      */
-    ctrl = E1000_READ_REG(hw, CTRL);
+    ctrl = er32(CTRL);
     ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
     ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
 
@@ -2600,7 +2600,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
         ctrl |= E1000_CTRL_SPD_100;
 
     /* Write the configured values back to the Device Control Reg. */
-    E1000_WRITE_REG(hw, CTRL, ctrl);
+    ew32(CTRL, ctrl);
     return E1000_SUCCESS;
 }
 
@@ -2622,7 +2622,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
     DEBUGFUNC("e1000_force_mac_fc");
 
     /* Get the current configuration of the Device Control Register */
-    ctrl = E1000_READ_REG(hw, CTRL);
+    ctrl = er32(CTRL);
 
     /* Because we didn't get link via the internal auto-negotiation
      * mechanism (we either forced link or we got link via PHY
@@ -2666,7 +2666,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
     if (hw->mac_type == e1000_82542_rev2_0)
         ctrl &= (~E1000_CTRL_TFCE);
 
-    E1000_WRITE_REG(hw, CTRL, ctrl);
+    ew32(CTRL, ctrl);
     return E1000_SUCCESS;
 }
 
@@ -2898,8 +2898,8 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
 
     DEBUGFUNC("e1000_check_for_link");
 
-    ctrl = E1000_READ_REG(hw, CTRL);
-    status = E1000_READ_REG(hw, STATUS);
+    ctrl = er32(CTRL);
+    status = er32(STATUS);
 
     /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be
      * set when the optics detect a signal. On older adapters, it will be
@@ -2907,7 +2907,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
      */
     if ((hw->media_type == e1000_media_type_fiber) ||
         (hw->media_type == e1000_media_type_internal_serdes)) {
-        rxcw = E1000_READ_REG(hw, RXCW);
+        rxcw = er32(RXCW);
 
         if (hw->media_type == e1000_media_type_fiber) {
             signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
@@ -2953,11 +2953,11 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
                 (!hw->autoneg) &&
                 (hw->forced_speed_duplex == e1000_10_full ||
                  hw->forced_speed_duplex == e1000_10_half)) {
-                E1000_WRITE_REG(hw, IMC, 0xffffffff);
+                ew32(IMC, 0xffffffff);
                 ret_val = e1000_polarity_reversal_workaround(hw);
-                icr = E1000_READ_REG(hw, ICR);
-                E1000_WRITE_REG(hw, ICS, (icr & ~E1000_ICS_LSC));
-                E1000_WRITE_REG(hw, IMS, IMS_ENABLE_MASK);
+                icr = er32(ICR);
+                ew32(ICS, (icr & ~E1000_ICS_LSC));
+                ew32(IMS, IMS_ENABLE_MASK);
             }
 
         } else {
@@ -3022,9 +3022,9 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
                  */
                 if (hw->tbi_compatibility_on) {
                     /* If we previously were in the mode, turn it off. */
-                    rctl = E1000_READ_REG(hw, RCTL);
+                    rctl = er32(RCTL);
                     rctl &= ~E1000_RCTL_SBP;
-                    E1000_WRITE_REG(hw, RCTL, rctl);
+                    ew32(RCTL, rctl);
                     hw->tbi_compatibility_on = false;
                 }
             } else {
@@ -3035,9 +3035,9 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
                  */
                 if (!hw->tbi_compatibility_on) {
                     hw->tbi_compatibility_on = true;
-                    rctl = E1000_READ_REG(hw, RCTL);
+                    rctl = er32(RCTL);
                     rctl |= E1000_RCTL_SBP;
-                    E1000_WRITE_REG(hw, RCTL, rctl);
+                    ew32(RCTL, rctl);
                 }
             }
         }
@@ -3061,12 +3061,12 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
         DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
 
         /* Disable auto-negotiation in the TXCW register */
-        E1000_WRITE_REG(hw, TXCW, (hw->txcw & ~E1000_TXCW_ANE));
+        ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
 
         /* Force link-up and also force full-duplex. */
-        ctrl = E1000_READ_REG(hw, CTRL);
+        ctrl = er32(CTRL);
         ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
-        E1000_WRITE_REG(hw, CTRL, ctrl);
+        ew32(CTRL, ctrl);
 
         /* Configure Flow Control after forcing link up. */
         ret_val = e1000_config_fc_after_link_up(hw);
@@ -3084,8 +3084,8 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
               (hw->media_type == e1000_media_type_internal_serdes)) &&
               (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
         DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
-        E1000_WRITE_REG(hw, TXCW, hw->txcw);
-        E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU));
+        ew32(TXCW, hw->txcw);
+        ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
         hw->serdes_link_down = false;
     }
@@ -3093,10 +3093,10 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
      * based on MAC synchronization for internal serdes media type.
      */
     else if ((hw->media_type == e1000_media_type_internal_serdes) &&
-             !(E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) {
+             !(E1000_TXCW_ANE & er32(TXCW))) {
         /* SYNCH bit and IV bit are sticky. */
         udelay(10);
-        if (E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) {
+        if (E1000_RXCW_SYNCH & er32(RXCW)) {
             if (!(rxcw & E1000_RXCW_IV)) {
                 hw->serdes_link_down = false;
                 DEBUGOUT("SERDES: Link is up.\n");
@@ -3107,8 +3107,8 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
         }
     }
     if ((hw->media_type == e1000_media_type_internal_serdes) &&
-        (E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) {
-        hw->serdes_link_down = !(E1000_STATUS_LU & E1000_READ_REG(hw, STATUS));
+        (E1000_TXCW_ANE & er32(TXCW))) {
+        hw->serdes_link_down = !(E1000_STATUS_LU & er32(STATUS));
     }
     return E1000_SUCCESS;
 }
@@ -3129,7 +3129,7 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
     DEBUGFUNC("e1000_get_speed_and_duplex");
 
     if (hw->mac_type >= e1000_82543) {
-        status = E1000_READ_REG(hw, STATUS);
+        status = er32(STATUS);
         if (status & E1000_STATUS_SPEED_1000) {
             *speed = SPEED_1000;
             DEBUGOUT("1000 Mbs, ");
@@ -3238,8 +3238,8 @@ static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
     /* Raise the clock input to the Management Data Clock (by setting the MDC
      * bit), and then delay 10 microseconds.
      */
-    E1000_WRITE_REG(hw, CTRL, (*ctrl | E1000_CTRL_MDC));
-    E1000_WRITE_FLUSH(hw);
+    ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
+    E1000_WRITE_FLUSH();
     udelay(10);
 }
 
@@ -3254,8 +3254,8 @@ static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
     /* Lower the clock input to the Management Data Clock (by clearing the MDC
      * bit), and then delay 10 microseconds.
      */
-    E1000_WRITE_REG(hw, CTRL, (*ctrl & ~E1000_CTRL_MDC));
-    E1000_WRITE_FLUSH(hw);
+    ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
+    E1000_WRITE_FLUSH();
     udelay(10);
 }
 
@@ -3280,7 +3280,7 @@ static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
     mask = 0x01;
     mask <<= (count - 1);
 
-    ctrl = E1000_READ_REG(hw, CTRL);
+    ctrl = er32(CTRL);
 
     /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
     ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
@@ -3296,8 +3296,8 @@ static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
         else
             ctrl &= ~E1000_CTRL_MDIO;
 
-        E1000_WRITE_REG(hw, CTRL, ctrl);
-        E1000_WRITE_FLUSH(hw);
+        ew32(CTRL, ctrl);
+        E1000_WRITE_FLUSH();
 
         udelay(10);
 
@@ -3328,14 +3328,14 @@ static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
      * by raising the input to the Management Data Clock (setting the MDC bit),
      * and then reading the value of the MDIO bit.
      */
-    ctrl = E1000_READ_REG(hw, CTRL);
+    ctrl = er32(CTRL);
 
     /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
     ctrl &= ~E1000_CTRL_MDIO_DIR;
     ctrl &= ~E1000_CTRL_MDIO;
 
-    E1000_WRITE_REG(hw, CTRL, ctrl);
-    E1000_WRITE_FLUSH(hw);
+    ew32(CTRL, ctrl);
+    E1000_WRITE_FLUSH();
 
     /* Raise and Lower the clock before reading in the data. This accounts for
      * the turnaround bits. The first clock occurred when we clocked out the
@@ -3347,7 +3347,7 @@ static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
     for (data = 0, i = 0; i < 16; i++) {
         data = data << 1;
         e1000_raise_mdi_clk(hw, &ctrl);
-        ctrl = E1000_READ_REG(hw, CTRL);
+        ctrl = er32(CTRL);
         /* Check to see if we shifted in a "1". */
         if (ctrl & E1000_CTRL_MDIO)
             data |= 1;
@@ -3379,7 +3379,7 @@ static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
             if (e1000_get_hw_eeprom_semaphore(hw))
                 return -E1000_ERR_SWFW_SYNC;
 
-            swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC);
+            swfw_sync = er32(SW_FW_SYNC);
             if (!(swfw_sync & (fwmask | swmask))) {
                 break;
             }
@@ -3397,7 +3397,7 @@ static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
     }
 
     swfw_sync |= swmask;
-    E1000_WRITE_REG(hw, SW_FW_SYNC, swfw_sync);
+    ew32(SW_FW_SYNC, swfw_sync);
 
     e1000_put_hw_eeprom_semaphore(hw);
     return E1000_SUCCESS;
@@ -3425,9 +3425,9 @@ static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
     while (e1000_get_hw_eeprom_semaphore(hw) != E1000_SUCCESS);
         /* empty */
 
-    swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC);
+    swfw_sync = er32(SW_FW_SYNC);
     swfw_sync &= ~swmask;
-    E1000_WRITE_REG(hw, SW_FW_SYNC, swfw_sync);
+    ew32(SW_FW_SYNC, swfw_sync);
 
     e1000_put_hw_eeprom_semaphore(hw);
 }
@@ -3446,7 +3446,7 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
     DEBUGFUNC("e1000_read_phy_reg");
 
     if ((hw->mac_type == e1000_80003es2lan) &&
-        (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+        (er32(STATUS) & E1000_STATUS_FUNC_1)) {
         swfw = E1000_SWFW_PHY1_SM;
     } else {
         swfw = E1000_SWFW_PHY0_SM;
@@ -3517,12 +3517,12 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
                 (phy_addr << E1000_MDIC_PHY_SHIFT) |
                 (E1000_MDIC_OP_READ));
 
-        E1000_WRITE_REG(hw, MDIC, mdic);
+        ew32(MDIC, mdic);
 
         /* Poll the ready bit to see if the MDI read completed */
         for (i = 0; i < 64; i++) {
             udelay(50);
-            mdic = E1000_READ_REG(hw, MDIC);
+            mdic = er32(MDIC);
             if (mdic & E1000_MDIC_READY) break;
         }
         if (!(mdic & E1000_MDIC_READY)) {
@@ -3581,7 +3581,7 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
     DEBUGFUNC("e1000_write_phy_reg");
 
     if ((hw->mac_type == e1000_80003es2lan) &&
-        (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+        (er32(STATUS) & E1000_STATUS_FUNC_1)) {
         swfw = E1000_SWFW_PHY1_SM;
     } else {
         swfw = E1000_SWFW_PHY0_SM;
@@ -3653,12 +3653,12 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
                 (phy_addr << E1000_MDIC_PHY_SHIFT) |
                 (E1000_MDIC_OP_WRITE));
 
-        E1000_WRITE_REG(hw, MDIC, mdic);
+        ew32(MDIC, mdic);
 
         /* Poll the ready bit to see if the MDI read completed */
         for (i = 0; i < 641; i++) {
             udelay(5);
-            mdic = E1000_READ_REG(hw, MDIC);
+            mdic = er32(MDIC);
             if (mdic & E1000_MDIC_READY) break;
         }
         if (!(mdic & E1000_MDIC_READY)) {
@@ -3697,7 +3697,7 @@ static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data)
     DEBUGFUNC("e1000_read_kmrn_reg");
 
     if ((hw->mac_type == e1000_80003es2lan) &&
-        (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+        (er32(STATUS) & E1000_STATUS_FUNC_1)) {
         swfw = E1000_SWFW_PHY1_SM;
     } else {
         swfw = E1000_SWFW_PHY0_SM;
@@ -3709,11 +3709,11 @@ static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data)
     reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
               E1000_KUMCTRLSTA_OFFSET) |
               E1000_KUMCTRLSTA_REN;
-    E1000_WRITE_REG(hw, KUMCTRLSTA, reg_val);
+    ew32(KUMCTRLSTA, reg_val);
     udelay(2);
 
     /* Read the data returned */
-    reg_val = E1000_READ_REG(hw, KUMCTRLSTA);
+    reg_val = er32(KUMCTRLSTA);
     *data = (u16)reg_val;
 
     e1000_swfw_sync_release(hw, swfw);
@@ -3727,7 +3727,7 @@ static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data)
     DEBUGFUNC("e1000_write_kmrn_reg");
 
     if ((hw->mac_type == e1000_80003es2lan) &&
-        (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+        (er32(STATUS) & E1000_STATUS_FUNC_1)) {
         swfw = E1000_SWFW_PHY1_SM;
     } else {
         swfw = E1000_SWFW_PHY0_SM;
@@ -3737,7 +3737,7 @@ static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data)
 
     reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
               E1000_KUMCTRLSTA_OFFSET) | data;
-    E1000_WRITE_REG(hw, KUMCTRLSTA, reg_val);
+    ew32(KUMCTRLSTA, reg_val);
     udelay(2);
 
     e1000_swfw_sync_release(hw, swfw);
@@ -3768,7 +3768,7 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw)
 
     if (hw->mac_type > e1000_82543) {
         if ((hw->mac_type == e1000_80003es2lan) &&
-            (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) {
+            (er32(STATUS) & E1000_STATUS_FUNC_1)) {
             swfw = E1000_SWFW_PHY1_SM;
         } else {
             swfw = E1000_SWFW_PHY0_SM;
@@ -3783,17 +3783,17 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw)
          * and deassert.  For e1000_82571 hardware and later, we instead delay
          * for 50us between and 10ms after the deassertion.
          */
-        ctrl = E1000_READ_REG(hw, CTRL);
-        E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
-        E1000_WRITE_FLUSH(hw);
+        ctrl = er32(CTRL);
+        ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+        E1000_WRITE_FLUSH();
 
         if (hw->mac_type < e1000_82571)
             msleep(10);
         else
             udelay(100);
 
-        E1000_WRITE_REG(hw, CTRL, ctrl);
-        E1000_WRITE_FLUSH(hw);
+        ew32(CTRL, ctrl);
+        E1000_WRITE_FLUSH();
 
         if (hw->mac_type >= e1000_82571)
             mdelay(10);
@@ -3803,24 +3803,24 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw)
         /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
          * bit to put the PHY into reset. Then, take it out of reset.
          */
-        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext = er32(CTRL_EXT);
         ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
         ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
-        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
-        E1000_WRITE_FLUSH(hw);
+        ew32(CTRL_EXT, ctrl_ext);
+        E1000_WRITE_FLUSH();
         msleep(10);
         ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
-        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
-        E1000_WRITE_FLUSH(hw);
+        ew32(CTRL_EXT, ctrl_ext);
+        E1000_WRITE_FLUSH();
     }
     udelay(150);
 
     if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
         /* Configure activity LED after PHY reset */
-        led_ctrl = E1000_READ_REG(hw, LEDCTL);
+        led_ctrl = er32(LEDCTL);
         led_ctrl &= IGP_ACTIVITY_LED_MASK;
         led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
-        E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
+        ew32(LEDCTL, led_ctrl);
     }
 
     /* Wait for FW to finish PHY configuration. */
@@ -3906,8 +3906,8 @@ void e1000_phy_powerdown_workaround(struct e1000_hw *hw)
 
     do {
         /* Disable link */
-        reg = E1000_READ_REG(hw, PHY_CTRL);
-        E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+        reg = er32(PHY_CTRL);
+        ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
                         E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
 
         /* Write VR power-down enable - bits 9:8 should be 10b */
@@ -3922,8 +3922,8 @@ void e1000_phy_powerdown_workaround(struct e1000_hw *hw)
             break;
 
         /* Issue PHY reset and repeat at most one more time */
-        reg = E1000_READ_REG(hw, CTRL);
-        E1000_WRITE_REG(hw, CTRL, reg | E1000_CTRL_PHY_RST);
+        reg = er32(CTRL);
+        ew32(CTRL, reg | E1000_CTRL_PHY_RST);
         retry++;
     } while (retry);
 
@@ -3981,8 +3981,8 @@ static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
             mdelay(5);
         }
         /* Disable GigE link negotiation */
-        reg = E1000_READ_REG(hw, PHY_CTRL);
-        E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+        reg = er32(PHY_CTRL);
+        ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
                         E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
 
         /* unable to acquire PCS lock */
@@ -4388,7 +4388,7 @@ s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
 s32 e1000_init_eeprom_params(struct e1000_hw *hw)
 {
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
-    u32 eecd = E1000_READ_REG(hw, EECD);
+    u32 eecd = er32(EECD);
     s32 ret_val = E1000_SUCCESS;
     u16 eeprom_size;
 
@@ -4490,7 +4490,7 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw)
             /* Ensure that the Autonomous FLASH update bit is cleared due to
              * Flash update issue on parts which use a FLASH for NVM. */
             eecd &= ~E1000_EECD_AUPDEN;
-            E1000_WRITE_REG(hw, EECD, eecd);
+            ew32(EECD, eecd);
         }
         break;
     case e1000_80003es2lan:
@@ -4580,8 +4580,8 @@ static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
      * wait <delay> microseconds.
      */
     *eecd = *eecd | E1000_EECD_SK;
-    E1000_WRITE_REG(hw, EECD, *eecd);
-    E1000_WRITE_FLUSH(hw);
+    ew32(EECD, *eecd);
+    E1000_WRITE_FLUSH();
     udelay(hw->eeprom.delay_usec);
 }
 
@@ -4597,8 +4597,8 @@ static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
      * wait 50 microseconds.
      */
     *eecd = *eecd & ~E1000_EECD_SK;
-    E1000_WRITE_REG(hw, EECD, *eecd);
-    E1000_WRITE_FLUSH(hw);
+    ew32(EECD, *eecd);
+    E1000_WRITE_FLUSH();
     udelay(hw->eeprom.delay_usec);
 }
 
@@ -4620,7 +4620,7 @@ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
      * In order to do this, "data" must be broken down into bits.
      */
     mask = 0x01 << (count - 1);
-    eecd = E1000_READ_REG(hw, EECD);
+    eecd = er32(EECD);
     if (eeprom->type == e1000_eeprom_microwire) {
         eecd &= ~E1000_EECD_DO;
     } else if (eeprom->type == e1000_eeprom_spi) {
@@ -4637,8 +4637,8 @@ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
         if (data & mask)
             eecd |= E1000_EECD_DI;
 
-        E1000_WRITE_REG(hw, EECD, eecd);
-        E1000_WRITE_FLUSH(hw);
+        ew32(EECD, eecd);
+        E1000_WRITE_FLUSH();
 
         udelay(eeprom->delay_usec);
 
@@ -4651,7 +4651,7 @@ static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
 
     /* We leave the "DI" bit set to "0" when we leave this routine. */
     eecd &= ~E1000_EECD_DI;
-    E1000_WRITE_REG(hw, EECD, eecd);
+    ew32(EECD, eecd);
 }
 
 /******************************************************************************
@@ -4672,7 +4672,7 @@ static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
      * always be clear.
      */
 
-    eecd = E1000_READ_REG(hw, EECD);
+    eecd = er32(EECD);
 
     eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
     data = 0;
@@ -4681,7 +4681,7 @@ static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
         data = data << 1;
         e1000_raise_ee_clk(hw, &eecd);
 
-        eecd = E1000_READ_REG(hw, EECD);
+        eecd = er32(EECD);
 
         eecd &= ~(E1000_EECD_DI);
         if (eecd & E1000_EECD_DO)
@@ -4710,23 +4710,23 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
 
     if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
         return -E1000_ERR_SWFW_SYNC;
-    eecd = E1000_READ_REG(hw, EECD);
+    eecd = er32(EECD);
 
     if (hw->mac_type != e1000_82573) {
         /* Request EEPROM Access */
         if (hw->mac_type > e1000_82544) {
             eecd |= E1000_EECD_REQ;
-            E1000_WRITE_REG(hw, EECD, eecd);
-            eecd = E1000_READ_REG(hw, EECD);
+            ew32(EECD, eecd);
+            eecd = er32(EECD);
             while ((!(eecd & E1000_EECD_GNT)) &&
                   (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
                 i++;
                 udelay(5);
-                eecd = E1000_READ_REG(hw, EECD);
+                eecd = er32(EECD);
             }
             if (!(eecd & E1000_EECD_GNT)) {
                 eecd &= ~E1000_EECD_REQ;
-                E1000_WRITE_REG(hw, EECD, eecd);
+                ew32(EECD, eecd);
                 DEBUGOUT("Could not acquire EEPROM grant\n");
                 e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
                 return -E1000_ERR_EEPROM;
@@ -4739,15 +4739,15 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
     if (eeprom->type == e1000_eeprom_microwire) {
         /* Clear SK and DI */
         eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
-        E1000_WRITE_REG(hw, EECD, eecd);
+        ew32(EECD, eecd);
 
         /* Set CS */
         eecd |= E1000_EECD_CS;
-        E1000_WRITE_REG(hw, EECD, eecd);
+        ew32(EECD, eecd);
     } else if (eeprom->type == e1000_eeprom_spi) {
         /* Clear SK and CS */
         eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-        E1000_WRITE_REG(hw, EECD, eecd);
+        ew32(EECD, eecd);
         udelay(1);
     }
 
@@ -4764,40 +4764,40 @@ static void e1000_standby_eeprom(struct e1000_hw *hw)
     struct e1000_eeprom_info *eeprom = &hw->eeprom;
     u32 eecd;
 
-    eecd = E1000_READ_REG(hw, EECD);
+    eecd = er32(EECD);
 
     if (eeprom->type == e1000_eeprom_microwire) {
         eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-        E1000_WRITE_REG(hw, EECD, eecd);
-        E1000_WRITE_FLUSH(hw);
+        ew32(EECD, eecd);
+        E1000_WRITE_FLUSH();
         udelay(eeprom->delay_usec);
 
         /* Clock high */
         eecd |= E1000_EECD_SK;
-        E1000_WRITE_REG(hw, EECD, eecd);
-        E1000_WRITE_FLUSH(hw);
+        ew32(EECD, eecd);
+        E1000_WRITE_FLUSH();
         udelay(eeprom->delay_usec);
 
         /* Select EEPROM */
         eecd |= E1000_EECD_CS;
-        E1000_WRITE_REG(hw, EECD, eecd);
-        E1000_WRITE_FLUSH(hw);
+        ew32(EECD, eecd);
+        E1000_WRITE_FLUSH();
         udelay(eeprom->delay_usec);
 
         /* Clock low */
         eecd &= ~E1000_EECD_SK;
-        E1000_WRITE_REG(hw, EECD, eecd);
-        E1000_WRITE_FLUSH(hw);
+        ew32(EECD, eecd);
+        E1000_WRITE_FLUSH();
         udelay(eeprom->delay_usec);
     } else if (eeprom->type == e1000_eeprom_spi) {
         /* Toggle CS to flush commands */
         eecd |= E1000_EECD_CS;
-        E1000_WRITE_REG(hw, EECD, eecd);
-        E1000_WRITE_FLUSH(hw);
+        ew32(EECD, eecd);
+        E1000_WRITE_FLUSH();
         udelay(eeprom->delay_usec);
         eecd &= ~E1000_EECD_CS;
-        E1000_WRITE_REG(hw, EECD, eecd);
-        E1000_WRITE_FLUSH(hw);
+        ew32(EECD, eecd);
+        E1000_WRITE_FLUSH();
         udelay(eeprom->delay_usec);
     }
 }
@@ -4813,13 +4813,13 @@ static void e1000_release_eeprom(struct e1000_hw *hw)
 
     DEBUGFUNC("e1000_release_eeprom");
 
-    eecd = E1000_READ_REG(hw, EECD);
+    eecd = er32(EECD);
 
     if (hw->eeprom.type == e1000_eeprom_spi) {
         eecd |= E1000_EECD_CS;  /* Pull CS high */
         eecd &= ~E1000_EECD_SK; /* Lower SCK */
 
-        E1000_WRITE_REG(hw, EECD, eecd);
+        ew32(EECD, eecd);
 
         udelay(hw->eeprom.delay_usec);
     } else if (hw->eeprom.type == e1000_eeprom_microwire) {
@@ -4828,25 +4828,25 @@ static void e1000_release_eeprom(struct e1000_hw *hw)
         /* CS on Microwire is active-high */
         eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
 
-        E1000_WRITE_REG(hw, EECD, eecd);
+        ew32(EECD, eecd);
 
         /* Rising edge of clock */
         eecd |= E1000_EECD_SK;
-        E1000_WRITE_REG(hw, EECD, eecd);
-        E1000_WRITE_FLUSH(hw);
+        ew32(EECD, eecd);
+        E1000_WRITE_FLUSH();
         udelay(hw->eeprom.delay_usec);
 
         /* Falling edge of clock */
         eecd &= ~E1000_EECD_SK;
-        E1000_WRITE_REG(hw, EECD, eecd);
-        E1000_WRITE_FLUSH(hw);
+        ew32(EECD, eecd);
+        E1000_WRITE_FLUSH();
         udelay(hw->eeprom.delay_usec);
     }
 
     /* Stop requesting EEPROM access */
     if (hw->mac_type > e1000_82544) {
         eecd &= ~E1000_EECD_REQ;
-        E1000_WRITE_REG(hw, EECD, eecd);
+        ew32(EECD, eecd);
     }
 
     e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
@@ -5009,13 +5009,13 @@ static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
         eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) +
                          E1000_EEPROM_RW_REG_START;
 
-        E1000_WRITE_REG(hw, EERD, eerd);
+        ew32(EERD, eerd);
         error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
 
         if (error) {
             break;
         }
-        data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA);
+        data[i] = (er32(EERD) >> E1000_EEPROM_RW_REG_DATA);
 
     }
 
@@ -5050,7 +5050,7 @@ static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
             break;
         }
 
-        E1000_WRITE_REG(hw, EEWR, register_value);
+        ew32(EEWR, register_value);
 
         error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
 
@@ -5076,9 +5076,9 @@ static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
 
     for (i = 0; i < attempts; i++) {
         if (eerd == E1000_EEPROM_POLL_READ)
-            reg = E1000_READ_REG(hw, EERD);
+            reg = er32(EERD);
         else
-            reg = E1000_READ_REG(hw, EEWR);
+            reg = er32(EEWR);
 
         if (reg & E1000_EEPROM_RW_REG_DONE) {
             done = E1000_SUCCESS;
@@ -5105,7 +5105,7 @@ static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
         return false;
 
     if (hw->mac_type == e1000_82573) {
-        eecd = E1000_READ_REG(hw, EECD);
+        eecd = er32(EECD);
 
         /* Isolate bits 15 & 16 */
         eecd = ((eecd >> 15) & 0x03);
@@ -5215,9 +5215,9 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
         e1000_commit_shadow_ram(hw);
         /* Reload the EEPROM, or else modifications will not appear
          * until after next adapter reset. */
-        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext = er32(CTRL_EXT);
         ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+        ew32(CTRL_EXT, ctrl_ext);
         msleep(10);
     }
     return E1000_SUCCESS;
@@ -5395,7 +5395,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
          * If DO does not go high in 10 milliseconds, then error out.
          */
         for (i = 0; i < 200; i++) {
-            eecd = E1000_READ_REG(hw, EECD);
+            eecd = er32(EECD);
             if (eecd & E1000_EECD_DO) break;
             udelay(50);
         }
@@ -5449,9 +5449,9 @@ static s32 e1000_commit_shadow_ram(struct e1000_hw *hw)
 
     if (hw->mac_type == e1000_82573) {
         /* The flop register will be used to determine if flash type is STM */
-        flop = E1000_READ_REG(hw, FLOP);
+        flop = er32(FLOP);
         for (i=0; i < attempts; i++) {
-            eecd = E1000_READ_REG(hw, EECD);
+            eecd = er32(EECD);
             if ((eecd & E1000_EECD_FLUPD) == 0) {
                 break;
             }
@@ -5464,14 +5464,14 @@ static s32 e1000_commit_shadow_ram(struct e1000_hw *hw)
 
         /* If STM opcode located in bits 15:8 of flop, reset firmware */
         if ((flop & 0xFF00) == E1000_STM_OPCODE) {
-            E1000_WRITE_REG(hw, HICR, E1000_HICR_FW_RESET);
+            ew32(HICR, E1000_HICR_FW_RESET);
         }
 
         /* Perform the flash update */
-        E1000_WRITE_REG(hw, EECD, eecd | E1000_EECD_FLUPD);
+        ew32(EECD, eecd | E1000_EECD_FLUPD);
 
         for (i=0; i < attempts; i++) {
-            eecd = E1000_READ_REG(hw, EECD);
+            eecd = er32(EECD);
             if ((eecd & E1000_EECD_FLUPD) == 0) {
                 break;
             }
@@ -5487,7 +5487,7 @@ static s32 e1000_commit_shadow_ram(struct e1000_hw *hw)
         /* We're writing to the opposite bank so if we're on bank 1,
          * write to bank 0 etc.  We also need to erase the segment that
          * is going to be written */
-        if (!(E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL)) {
+        if (!(er32(EECD) & E1000_EECD_SEC1VAL)) {
             new_bank_offset = hw->flash_bank_size * 2;
             old_bank_offset = 0;
             e1000_erase_ich8_4k_segment(hw, 1);
@@ -5621,7 +5621,7 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw)
     case e1000_82546_rev_3:
     case e1000_82571:
     case e1000_80003es2lan:
-        if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
+        if (er32(STATUS) & E1000_STATUS_FUNC_1)
             hw->perm_mac_addr[5] ^= 0x01;
         break;
     }
@@ -5666,9 +5666,9 @@ static void e1000_init_rx_addrs(struct e1000_hw *hw)
     DEBUGOUT("Clearing RAR[1-15]\n");
     for (i = 1; i < rar_num; i++) {
         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
         E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
     }
 }
 
@@ -5772,12 +5772,12 @@ void e1000_mta_set(struct e1000_hw *hw, u32 hash_value)
     if ((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
         temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1));
         E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
         E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp);
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
     } else {
         E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
     }
 }
 
@@ -5831,9 +5831,9 @@ void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
     }
 
     E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
-    E1000_WRITE_FLUSH(hw);
+    E1000_WRITE_FLUSH();
     E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
-    E1000_WRITE_FLUSH(hw);
+    E1000_WRITE_FLUSH();
 }
 
 /******************************************************************************
@@ -5853,12 +5853,12 @@ void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
     if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
         temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
         E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
         E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
     } else {
         E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
     }
 }
 
@@ -5896,7 +5896,7 @@ static void e1000_clear_vfta(struct e1000_hw *hw)
          * manageability unit */
         vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
         E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
     }
 }
 
@@ -5916,7 +5916,7 @@ static s32 e1000_id_led_init(struct e1000_hw *hw)
         return E1000_SUCCESS;
     }
 
-    ledctl = E1000_READ_REG(hw, LEDCTL);
+    ledctl = er32(LEDCTL);
     hw->ledctl_default = ledctl;
     hw->ledctl_mode1 = hw->ledctl_default;
     hw->ledctl_mode2 = hw->ledctl_default;
@@ -6013,7 +6013,7 @@ s32 e1000_setup_led(struct e1000_hw *hw)
         /* Fall Through */
     default:
         if (hw->media_type == e1000_media_type_fiber) {
-            ledctl = E1000_READ_REG(hw, LEDCTL);
+            ledctl = er32(LEDCTL);
             /* Save current LEDCTL settings */
             hw->ledctl_default = ledctl;
             /* Turn off LED0 */
@@ -6022,9 +6022,9 @@ s32 e1000_setup_led(struct e1000_hw *hw)
                         E1000_LEDCTL_LED0_MODE_MASK);
             ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
                        E1000_LEDCTL_LED0_MODE_SHIFT);
-            E1000_WRITE_REG(hw, LEDCTL, ledctl);
+            ew32(LEDCTL, ledctl);
         } else if (hw->media_type == e1000_media_type_copper)
-            E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1);
+            ew32(LEDCTL, hw->ledctl_mode1);
         break;
     }
 
@@ -6064,7 +6064,7 @@ s32 e1000_blink_led_start(struct e1000_hw *hw)
                 ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
     }
 
-    E1000_WRITE_REG(hw, LEDCTL, ledctl_blink);
+    ew32(LEDCTL, ledctl_blink);
 
     return E1000_SUCCESS;
 }
@@ -6103,7 +6103,7 @@ s32 e1000_cleanup_led(struct e1000_hw *hw)
             break;
         }
         /* Restore LEDCTL settings */
-        E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_default);
+        ew32(LEDCTL, hw->ledctl_default);
         break;
     }
 
@@ -6117,7 +6117,7 @@ s32 e1000_cleanup_led(struct e1000_hw *hw)
  *****************************************************************************/
 s32 e1000_led_on(struct e1000_hw *hw)
 {
-    u32 ctrl = E1000_READ_REG(hw, CTRL);
+    u32 ctrl = er32(CTRL);
 
     DEBUGFUNC("e1000_led_on");
 
@@ -6149,13 +6149,13 @@ s32 e1000_led_on(struct e1000_hw *hw)
             e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
                  (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
         } else if (hw->media_type == e1000_media_type_copper) {
-            E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode2);
+            ew32(LEDCTL, hw->ledctl_mode2);
             return E1000_SUCCESS;
         }
         break;
     }
 
-    E1000_WRITE_REG(hw, CTRL, ctrl);
+    ew32(CTRL, ctrl);
 
     return E1000_SUCCESS;
 }
@@ -6167,7 +6167,7 @@ s32 e1000_led_on(struct e1000_hw *hw)
  *****************************************************************************/
 s32 e1000_led_off(struct e1000_hw *hw)
 {
-    u32 ctrl = E1000_READ_REG(hw, CTRL);
+    u32 ctrl = er32(CTRL);
 
     DEBUGFUNC("e1000_led_off");
 
@@ -6199,13 +6199,13 @@ s32 e1000_led_off(struct e1000_hw *hw)
             e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
                  (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
         } else if (hw->media_type == e1000_media_type_copper) {
-            E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1);
+            ew32(LEDCTL, hw->ledctl_mode1);
             return E1000_SUCCESS;
         }
         break;
     }
 
-    E1000_WRITE_REG(hw, CTRL, ctrl);
+    ew32(CTRL, ctrl);
 
     return E1000_SUCCESS;
 }
@@ -6219,93 +6219,93 @@ static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
 {
     volatile u32 temp;
 
-    temp = E1000_READ_REG(hw, CRCERRS);
-    temp = E1000_READ_REG(hw, SYMERRS);
-    temp = E1000_READ_REG(hw, MPC);
-    temp = E1000_READ_REG(hw, SCC);
-    temp = E1000_READ_REG(hw, ECOL);
-    temp = E1000_READ_REG(hw, MCC);
-    temp = E1000_READ_REG(hw, LATECOL);
-    temp = E1000_READ_REG(hw, COLC);
-    temp = E1000_READ_REG(hw, DC);
-    temp = E1000_READ_REG(hw, SEC);
-    temp = E1000_READ_REG(hw, RLEC);
-    temp = E1000_READ_REG(hw, XONRXC);
-    temp = E1000_READ_REG(hw, XONTXC);
-    temp = E1000_READ_REG(hw, XOFFRXC);
-    temp = E1000_READ_REG(hw, XOFFTXC);
-    temp = E1000_READ_REG(hw, FCRUC);
+    temp = er32(CRCERRS);
+    temp = er32(SYMERRS);
+    temp = er32(MPC);
+    temp = er32(SCC);
+    temp = er32(ECOL);
+    temp = er32(MCC);
+    temp = er32(LATECOL);
+    temp = er32(COLC);
+    temp = er32(DC);
+    temp = er32(SEC);
+    temp = er32(RLEC);
+    temp = er32(XONRXC);
+    temp = er32(XONTXC);
+    temp = er32(XOFFRXC);
+    temp = er32(XOFFTXC);
+    temp = er32(FCRUC);
 
     if (hw->mac_type != e1000_ich8lan) {
-    temp = E1000_READ_REG(hw, PRC64);
-    temp = E1000_READ_REG(hw, PRC127);
-    temp = E1000_READ_REG(hw, PRC255);
-    temp = E1000_READ_REG(hw, PRC511);
-    temp = E1000_READ_REG(hw, PRC1023);
-    temp = E1000_READ_REG(hw, PRC1522);
-    }
-
-    temp = E1000_READ_REG(hw, GPRC);
-    temp = E1000_READ_REG(hw, BPRC);
-    temp = E1000_READ_REG(hw, MPRC);
-    temp = E1000_READ_REG(hw, GPTC);
-    temp = E1000_READ_REG(hw, GORCL);
-    temp = E1000_READ_REG(hw, GORCH);
-    temp = E1000_READ_REG(hw, GOTCL);
-    temp = E1000_READ_REG(hw, GOTCH);
-    temp = E1000_READ_REG(hw, RNBC);
-    temp = E1000_READ_REG(hw, RUC);
-    temp = E1000_READ_REG(hw, RFC);
-    temp = E1000_READ_REG(hw, ROC);
-    temp = E1000_READ_REG(hw, RJC);
-    temp = E1000_READ_REG(hw, TORL);
-    temp = E1000_READ_REG(hw, TORH);
-    temp = E1000_READ_REG(hw, TOTL);
-    temp = E1000_READ_REG(hw, TOTH);
-    temp = E1000_READ_REG(hw, TPR);
-    temp = E1000_READ_REG(hw, TPT);
+    temp = er32(PRC64);
+    temp = er32(PRC127);
+    temp = er32(PRC255);
+    temp = er32(PRC511);
+    temp = er32(PRC1023);
+    temp = er32(PRC1522);
+    }
+
+    temp = er32(GPRC);
+    temp = er32(BPRC);
+    temp = er32(MPRC);
+    temp = er32(GPTC);
+    temp = er32(GORCL);
+    temp = er32(GORCH);
+    temp = er32(GOTCL);
+    temp = er32(GOTCH);
+    temp = er32(RNBC);
+    temp = er32(RUC);
+    temp = er32(RFC);
+    temp = er32(ROC);
+    temp = er32(RJC);
+    temp = er32(TORL);
+    temp = er32(TORH);
+    temp = er32(TOTL);
+    temp = er32(TOTH);
+    temp = er32(TPR);
+    temp = er32(TPT);
 
     if (hw->mac_type != e1000_ich8lan) {
-    temp = E1000_READ_REG(hw, PTC64);
-    temp = E1000_READ_REG(hw, PTC127);
-    temp = E1000_READ_REG(hw, PTC255);
-    temp = E1000_READ_REG(hw, PTC511);
-    temp = E1000_READ_REG(hw, PTC1023);
-    temp = E1000_READ_REG(hw, PTC1522);
+    temp = er32(PTC64);
+    temp = er32(PTC127);
+    temp = er32(PTC255);
+    temp = er32(PTC511);
+    temp = er32(PTC1023);
+    temp = er32(PTC1522);
     }
 
-    temp = E1000_READ_REG(hw, MPTC);
-    temp = E1000_READ_REG(hw, BPTC);
+    temp = er32(MPTC);
+    temp = er32(BPTC);
 
     if (hw->mac_type < e1000_82543) return;
 
-    temp = E1000_READ_REG(hw, ALGNERRC);
-    temp = E1000_READ_REG(hw, RXERRC);
-    temp = E1000_READ_REG(hw, TNCRS);
-    temp = E1000_READ_REG(hw, CEXTERR);
-    temp = E1000_READ_REG(hw, TSCTC);
-    temp = E1000_READ_REG(hw, TSCTFC);
+    temp = er32(ALGNERRC);
+    temp = er32(RXERRC);
+    temp = er32(TNCRS);
+    temp = er32(CEXTERR);
+    temp = er32(TSCTC);
+    temp = er32(TSCTFC);
 
     if (hw->mac_type <= e1000_82544) return;
 
-    temp = E1000_READ_REG(hw, MGTPRC);
-    temp = E1000_READ_REG(hw, MGTPDC);
-    temp = E1000_READ_REG(hw, MGTPTC);
+    temp = er32(MGTPRC);
+    temp = er32(MGTPDC);
+    temp = er32(MGTPTC);
 
     if (hw->mac_type <= e1000_82547_rev_2) return;
 
-    temp = E1000_READ_REG(hw, IAC);
-    temp = E1000_READ_REG(hw, ICRXOC);
+    temp = er32(IAC);
+    temp = er32(ICRXOC);
 
     if (hw->mac_type == e1000_ich8lan) return;
 
-    temp = E1000_READ_REG(hw, ICRXPTC);
-    temp = E1000_READ_REG(hw, ICRXATC);
-    temp = E1000_READ_REG(hw, ICTXPTC);
-    temp = E1000_READ_REG(hw, ICTXATC);
-    temp = E1000_READ_REG(hw, ICTXQEC);
-    temp = E1000_READ_REG(hw, ICTXQMTC);
-    temp = E1000_READ_REG(hw, ICRXDMTC);
+    temp = er32(ICRXPTC);
+    temp = er32(ICRXATC);
+    temp = er32(ICTXPTC);
+    temp = er32(ICTXATC);
+    temp = er32(ICTXQEC);
+    temp = er32(ICTXQMTC);
+    temp = er32(ICRXDMTC);
 }
 
 /******************************************************************************
@@ -6331,7 +6331,7 @@ void e1000_reset_adaptive(struct e1000_hw *hw)
             hw->ifs_ratio = IFS_RATIO;
         }
         hw->in_ifs_mode = false;
-        E1000_WRITE_REG(hw, AIT, 0);
+        ew32(AIT, 0);
     } else {
         DEBUGOUT("Not in Adaptive IFS mode!\n");
     }
@@ -6358,14 +6358,14 @@ void e1000_update_adaptive(struct e1000_hw *hw)
                         hw->current_ifs_val = hw->ifs_min_val;
                     else
                         hw->current_ifs_val += hw->ifs_step_size;
-                    E1000_WRITE_REG(hw, AIT, hw->current_ifs_val);
+                    ew32(AIT, hw->current_ifs_val);
                 }
             }
         } else {
             if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
                 hw->current_ifs_val = 0;
                 hw->in_ifs_mode = false;
-                E1000_WRITE_REG(hw, AIT, 0);
+                ew32(AIT, 0);
             }
         }
     } else {
@@ -6489,7 +6489,7 @@ void e1000_get_bus_info(struct e1000_hw *hw)
         hw->bus_width = e1000_bus_width_pciex_1;
         break;
     default:
-        status = E1000_READ_REG(hw, STATUS);
+        status = er32(STATUS);
         hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
                        e1000_bus_type_pcix : e1000_bus_type_pci;
 
@@ -7114,7 +7114,7 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
         /* MAC writes into PHY register based on the state transition
          * and start auto-negotiation. SW driver can overwrite the settings
          * in CSR PHY power control E1000_PHY_CTRL register. */
-        phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
+        phy_ctrl = er32(PHY_CTRL);
     } else {
         ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
         if (ret_val)
@@ -7131,7 +7131,7 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
         } else {
             if (hw->mac_type == e1000_ich8lan) {
                 phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
-                E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+                ew32(PHY_CTRL, phy_ctrl);
             } else {
                 phy_data &= ~IGP02E1000_PM_D3_LPLU;
                 ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
@@ -7182,7 +7182,7 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
         } else {
             if (hw->mac_type == e1000_ich8lan) {
                 phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
-                E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+                ew32(PHY_CTRL, phy_ctrl);
             } else {
                 phy_data |= IGP02E1000_PM_D3_LPLU;
                 ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
@@ -7231,7 +7231,7 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
         return E1000_SUCCESS;
 
     if (hw->mac_type == e1000_ich8lan) {
-        phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
+        phy_ctrl = er32(PHY_CTRL);
     } else {
         ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
         if (ret_val)
@@ -7241,7 +7241,7 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
     if (!active) {
         if (hw->mac_type == e1000_ich8lan) {
             phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
-            E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+            ew32(PHY_CTRL, phy_ctrl);
         } else {
             phy_data &= ~IGP02E1000_PM_D0_LPLU;
             ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
@@ -7282,7 +7282,7 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
 
         if (hw->mac_type == e1000_ich8lan) {
             phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
-            E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+            ew32(PHY_CTRL, phy_ctrl);
         } else {
             phy_data |= IGP02E1000_PM_D0_LPLU;
             ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
@@ -7404,14 +7404,14 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
     u8 i;
 
     /* Check that the host interface is enabled. */
-    hicr = E1000_READ_REG(hw, HICR);
+    hicr = er32(HICR);
     if ((hicr & E1000_HICR_EN) == 0) {
         DEBUGOUT("E1000_HOST_EN bit disabled.\n");
         return -E1000_ERR_HOST_INTERFACE_COMMAND;
     }
     /* check the previous command is completed */
     for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
-        hicr = E1000_READ_REG(hw, HICR);
+        hicr = er32(HICR);
         if (!(hicr & E1000_HICR_C))
             break;
         mdelay(1);
@@ -7524,7 +7524,7 @@ static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
     /* The device driver writes the relevant command block into the ram area. */
     for (i = 0; i < length; i++) {
         E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *) hdr + i));
-        E1000_WRITE_FLUSH(hw);
+        E1000_WRITE_FLUSH();
     }
 
     return E1000_SUCCESS;
@@ -7541,9 +7541,9 @@ static s32 e1000_mng_write_commit(struct e1000_hw *hw)
 {
     u32 hicr;
 
-    hicr = E1000_READ_REG(hw, HICR);
+    hicr = er32(HICR);
     /* Setting this bit tells the ARC that a new command is pending. */
-    E1000_WRITE_REG(hw, HICR, hicr | E1000_HICR_C);
+    ew32(HICR, hicr | E1000_HICR_C);
 
     return E1000_SUCCESS;
 }
@@ -7558,7 +7558,7 @@ bool e1000_check_mng_mode(struct e1000_hw *hw)
 {
     u32 fwsm;
 
-    fwsm = E1000_READ_REG(hw, FWSM);
+    fwsm = er32(FWSM);
 
     if (hw->mac_type == e1000_ich8lan) {
         if ((fwsm & E1000_FWSM_MODE_MASK) ==
@@ -7671,14 +7671,14 @@ u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
     u32 fwsm, factps;
 
     if (hw->asf_firmware_present) {
-        manc = E1000_READ_REG(hw, MANC);
+        manc = er32(MANC);
 
         if (!(manc & E1000_MANC_RCV_TCO_EN) ||
             !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
             return false;
         if (e1000_arc_subsystem_valid(hw)) {
-            fwsm = E1000_READ_REG(hw, FWSM);
-            factps = E1000_READ_REG(hw, FACTPS);
+            fwsm = er32(FWSM);
+            factps = er32(FACTPS);
 
             if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) ==
                    e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG))
@@ -7792,9 +7792,9 @@ static void e1000_set_pci_express_master_disable(struct e1000_hw *hw)
     if (hw->bus_type != e1000_bus_type_pci_express)
         return;
 
-    ctrl = E1000_READ_REG(hw, CTRL);
+    ctrl = er32(CTRL);
     ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
-    E1000_WRITE_REG(hw, CTRL, ctrl);
+    ew32(CTRL, ctrl);
 }
 
 /*******************************************************************************
@@ -7820,7 +7820,7 @@ s32 e1000_disable_pciex_master(struct e1000_hw *hw)
     e1000_set_pci_express_master_disable(hw);
 
     while (timeout) {
-        if (!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
+        if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
             break;
         else
             udelay(100);
@@ -7861,7 +7861,7 @@ static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
     case e1000_80003es2lan:
     case e1000_ich8lan:
         while (timeout) {
-            if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD)
+            if (er32(EECD) & E1000_EECD_AUTO_RD)
                 break;
             else msleep(1);
             timeout--;
@@ -7905,13 +7905,13 @@ static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
         break;
     case e1000_80003es2lan:
         /* Separate *_CFG_DONE_* bit for each port */
-        if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
+        if (er32(STATUS) & E1000_STATUS_FUNC_1)
             cfg_mask = E1000_EEPROM_CFG_DONE_PORT_1;
         /* Fall Through */
     case e1000_82571:
     case e1000_82572:
         while (timeout) {
-            if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask)
+            if (er32(EEMNGCTL) & cfg_mask)
                 break;
             else
                 msleep(1);
@@ -7957,11 +7957,11 @@ static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
     /* Get the FW semaphore. */
     timeout = hw->eeprom.word_size + 1;
     while (timeout) {
-        swsm = E1000_READ_REG(hw, SWSM);
+        swsm = er32(SWSM);
         swsm |= E1000_SWSM_SWESMBI;
-        E1000_WRITE_REG(hw, SWSM, swsm);
+        ew32(SWSM, swsm);
         /* if we managed to set the bit we got the semaphore. */
-        swsm = E1000_READ_REG(hw, SWSM);
+        swsm = er32(SWSM);
         if (swsm & E1000_SWSM_SWESMBI)
             break;
 
@@ -7996,13 +7996,13 @@ static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
     if (!hw->eeprom_semaphore_present)
         return;
 
-    swsm = E1000_READ_REG(hw, SWSM);
+    swsm = er32(SWSM);
     if (hw->mac_type == e1000_80003es2lan) {
         /* Release both semaphores. */
         swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
     } else
         swsm &= ~(E1000_SWSM_SWESMBI);
-    E1000_WRITE_REG(hw, SWSM, swsm);
+    ew32(SWSM, swsm);
 }
 
 /***************************************************************************
@@ -8027,7 +8027,7 @@ static s32 e1000_get_software_semaphore(struct e1000_hw *hw)
     }
 
     while (timeout) {
-        swsm = E1000_READ_REG(hw, SWSM);
+        swsm = er32(SWSM);
         /* If SMBI bit cleared, it is now set and we hold the semaphore */
         if (!(swsm & E1000_SWSM_SMBI))
             break;
@@ -8060,10 +8060,10 @@ static void e1000_release_software_semaphore(struct e1000_hw *hw)
         return;
     }
 
-    swsm = E1000_READ_REG(hw, SWSM);
+    swsm = er32(SWSM);
     /* Release the SW semaphores.*/
     swsm &= ~E1000_SWSM_SMBI;
-    E1000_WRITE_REG(hw, SWSM, swsm);
+    ew32(SWSM, swsm);
 }
 
 /******************************************************************************
@@ -8083,13 +8083,13 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw)
     u32 fwsm = 0;
 
     if (hw->mac_type == e1000_ich8lan) {
-        fwsm = E1000_READ_REG(hw, FWSM);
+        fwsm = er32(FWSM);
         return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS
                                             : E1000_BLK_PHY_RESET;
     }
 
     if (hw->mac_type > e1000_82547_rev_2)
-        manc = E1000_READ_REG(hw, MANC);
+        manc = er32(MANC);
     return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
         E1000_BLK_PHY_RESET : E1000_SUCCESS;
 }
@@ -8108,7 +8108,7 @@ static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw)
     case e1000_82572:
     case e1000_82573:
     case e1000_80003es2lan:
-        fwsm = E1000_READ_REG(hw, FWSM);
+        fwsm = er32(FWSM);
         if ((fwsm & E1000_FWSM_MODE_MASK) != 0)
             return true;
         break;
@@ -8143,19 +8143,19 @@ static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
         return E1000_SUCCESS;
 
     if (no_snoop) {
-        gcr_reg = E1000_READ_REG(hw, GCR);
+        gcr_reg = er32(GCR);
         gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL);
         gcr_reg |= no_snoop;
-        E1000_WRITE_REG(hw, GCR, gcr_reg);
+        ew32(GCR, gcr_reg);
     }
     if (hw->mac_type == e1000_ich8lan) {
         u32 ctrl_ext;
 
-        E1000_WRITE_REG(hw, GCR, PCI_EX_82566_SNOOP_ALL);
+        ew32(GCR, PCI_EX_82566_SNOOP_ALL);
 
-        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext = er32(CTRL_EXT);
         ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
-        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+        ew32(CTRL_EXT, ctrl_ext);
     }
 
     return E1000_SUCCESS;
@@ -8179,11 +8179,11 @@ static s32 e1000_get_software_flag(struct e1000_hw *hw)
 
     if (hw->mac_type == e1000_ich8lan) {
         while (timeout) {
-            extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+            extcnf_ctrl = er32(EXTCNF_CTRL);
             extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
-            E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+            ew32(EXTCNF_CTRL, extcnf_ctrl);
 
-            extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+            extcnf_ctrl = er32(EXTCNF_CTRL);
             if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
                 break;
             mdelay(1);
@@ -8215,9 +8215,9 @@ static void e1000_release_software_flag(struct e1000_hw *hw)
     DEBUGFUNC("e1000_release_software_flag");
 
     if (hw->mac_type == e1000_ich8lan) {
-        extcnf_ctrl= E1000_READ_REG(hw, EXTCNF_CTRL);
+        extcnf_ctrl= er32(EXTCNF_CTRL);
         extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
-        E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+        ew32(EXTCNF_CTRL, extcnf_ctrl);
     }
 
     return;
@@ -8248,7 +8248,7 @@ static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
      * to be updated with each read.
      */
     /* Value of bit 22 corresponds to the flash bank we're on. */
-    flash_bank = (E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
+    flash_bank = (er32(EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
 
     /* Adjust offset appropriately if we're on bank 1 - adjust for word size */
     bank_offset = flash_bank * (hw->flash_bank_size * 2);
@@ -8813,32 +8813,32 @@ static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw)
           return E1000_SUCCESS;
 
     /* Check if SW needs configure the PHY */
-    reg_data = E1000_READ_REG(hw, FEXTNVM);
+    reg_data = er32(FEXTNVM);
     if (!(reg_data & FEXTNVM_SW_CONFIG))
         return E1000_SUCCESS;
 
     /* Wait for basic configuration completes before proceeding*/
     loop = 0;
     do {
-        reg_data = E1000_READ_REG(hw, STATUS) & E1000_STATUS_LAN_INIT_DONE;
+        reg_data = er32(STATUS) & E1000_STATUS_LAN_INIT_DONE;
         udelay(100);
         loop++;
     } while ((!reg_data) && (loop < 50));
 
     /* Clear the Init Done bit for the next init event */
-    reg_data = E1000_READ_REG(hw, STATUS);
+    reg_data = er32(STATUS);
     reg_data &= ~E1000_STATUS_LAN_INIT_DONE;
-    E1000_WRITE_REG(hw, STATUS, reg_data);
+    ew32(STATUS, reg_data);
 
     /* Make sure HW does not configure LCD from PHY extended configuration
        before SW configuration */
-    reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+    reg_data = er32(EXTCNF_CTRL);
     if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) {
-        reg_data = E1000_READ_REG(hw, EXTCNF_SIZE);
+        reg_data = er32(EXTCNF_SIZE);
         cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH;
         cnf_size >>= 16;
         if (cnf_size) {
-            reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+            reg_data = er32(EXTCNF_CTRL);
             cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER;
             /* cnf_base_addr is in DWORD */
             cnf_base_addr >>= 16;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 9a20ba39346..ad1f052c3d3 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -269,12 +269,13 @@ module_exit(e1000_exit_module);
 
 static int e1000_request_irq(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	irq_handler_t handler = e1000_intr;
 	int irq_flags = IRQF_SHARED;
 	int err;
 
-	if (adapter->hw.mac_type >= e1000_82571) {
+	if (hw->mac_type >= e1000_82571) {
 		adapter->have_msi = !pci_enable_msi(adapter->pdev);
 		if (adapter->have_msi) {
 			handler = e1000_intr_msi;
@@ -311,8 +312,10 @@ static void e1000_free_irq(struct e1000_adapter *adapter)
 
 static void e1000_irq_disable(struct e1000_adapter *adapter)
 {
-	E1000_WRITE_REG(&adapter->hw, IMC, ~0);
-	E1000_WRITE_FLUSH(&adapter->hw);
+	struct e1000_hw *hw = &adapter->hw;
+
+	ew32(IMC, ~0);
+	E1000_WRITE_FLUSH();
 	synchronize_irq(adapter->pdev->irq);
 }
 
@@ -323,18 +326,21 @@ static void e1000_irq_disable(struct e1000_adapter *adapter)
 
 static void e1000_irq_enable(struct e1000_adapter *adapter)
 {
-	E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
-	E1000_WRITE_FLUSH(&adapter->hw);
+	struct e1000_hw *hw = &adapter->hw;
+
+	ew32(IMS, IMS_ENABLE_MASK);
+	E1000_WRITE_FLUSH();
 }
 
 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
-	u16 vid = adapter->hw.mng_cookie.vlan_id;
+	u16 vid = hw->mng_cookie.vlan_id;
 	u16 old_vid = adapter->mng_vlan_id;
 	if (adapter->vlgrp) {
 		if (!vlan_group_get_device(adapter->vlgrp, vid)) {
-			if (adapter->hw.mng_cookie.status &
+			if (hw->mng_cookie.status &
 				E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
 				e1000_vlan_rx_add_vid(netdev, vid);
 				adapter->mng_vlan_id = vid;
@@ -365,21 +371,20 @@ static void e1000_release_hw_control(struct e1000_adapter *adapter)
 {
 	u32 ctrl_ext;
 	u32 swsm;
+	struct e1000_hw *hw = &adapter->hw;
 
 	/* Let firmware taken over control of h/w */
-	switch (adapter->hw.mac_type) {
+	switch (hw->mac_type) {
 	case e1000_82573:
-		swsm = E1000_READ_REG(&adapter->hw, SWSM);
-		E1000_WRITE_REG(&adapter->hw, SWSM,
-				swsm & ~E1000_SWSM_DRV_LOAD);
+		swsm = er32(SWSM);
+		ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
 		break;
 	case e1000_82571:
 	case e1000_82572:
 	case e1000_80003es2lan:
 	case e1000_ich8lan:
-		ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-		E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-				ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+		ctrl_ext = er32(CTRL_EXT);
+		ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
 		break;
 	default:
 		break;
@@ -401,21 +406,20 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter)
 {
 	u32 ctrl_ext;
 	u32 swsm;
+	struct e1000_hw *hw = &adapter->hw;
 
 	/* Let firmware know the driver has taken over */
-	switch (adapter->hw.mac_type) {
+	switch (hw->mac_type) {
 	case e1000_82573:
-		swsm = E1000_READ_REG(&adapter->hw, SWSM);
-		E1000_WRITE_REG(&adapter->hw, SWSM,
-				swsm | E1000_SWSM_DRV_LOAD);
+		swsm = er32(SWSM);
+		ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
 		break;
 	case e1000_82571:
 	case e1000_82572:
 	case e1000_80003es2lan:
 	case e1000_ich8lan:
-		ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
-		E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
-				ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+		ctrl_ext = er32(CTRL_EXT);
+		ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
 		break;
 	default:
 		break;
@@ -424,8 +428,10 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter)
 
 static void e1000_init_manageability(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
+
 	if (adapter->en_mng_pt) {
-		u32 manc = E1000_READ_REG(&adapter->hw, MANC);
+		u32 manc = er32(MANC);
 
 		/* disable hardware interception of ARP */
 		manc &= ~(E1000_MANC_ARP_EN);
@@ -433,36 +439,38 @@ static void e1000_init_manageability(struct e1000_adapter *adapter)
 		/* enable receiving management packets to the host */
 		/* this will probably generate destination unreachable messages
 		 * from the host OS, but the packets will be handled on SMBUS */
-		if (adapter->hw.has_manc2h) {
-			u32 manc2h = E1000_READ_REG(&adapter->hw, MANC2H);
+		if (hw->has_manc2h) {
+			u32 manc2h = er32(MANC2H);
 
 			manc |= E1000_MANC_EN_MNG2HOST;
 #define E1000_MNG2HOST_PORT_623 (1 << 5)
 #define E1000_MNG2HOST_PORT_664 (1 << 6)
 			manc2h |= E1000_MNG2HOST_PORT_623;
 			manc2h |= E1000_MNG2HOST_PORT_664;
-			E1000_WRITE_REG(&adapter->hw, MANC2H, manc2h);
+			ew32(MANC2H, manc2h);
 		}
 
-		E1000_WRITE_REG(&adapter->hw, MANC, manc);
+		ew32(MANC, manc);
 	}
 }
 
 static void e1000_release_manageability(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
+
 	if (adapter->en_mng_pt) {
-		u32 manc = E1000_READ_REG(&adapter->hw, MANC);
+		u32 manc = er32(MANC);
 
 		/* re-enable hardware interception of ARP */
 		manc |= E1000_MANC_ARP_EN;
 
-		if (adapter->hw.has_manc2h)
+		if (hw->has_manc2h)
 			manc &= ~E1000_MANC_EN_MNG2HOST;
 
 		/* don't explicitly have to mess with MANC2H since
 		 * MANC has an enable disable that gates MANC2H */
 
-		E1000_WRITE_REG(&adapter->hw, MANC, manc);
+		ew32(MANC, manc);
 	}
 }
 
@@ -497,6 +505,8 @@ static void e1000_configure(struct e1000_adapter *adapter)
 
 int e1000_up(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
+
 	/* hardware has been reset, we need to reload some things */
 	e1000_configure(adapter);
 
@@ -508,7 +518,7 @@ int e1000_up(struct e1000_adapter *adapter)
 	e1000_irq_enable(adapter);
 
 	/* fire a link change interrupt to start the watchdog */
-	E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
+	ew32(ICS, E1000_ICS_LSC);
 	return 0;
 }
 
@@ -524,30 +534,33 @@ int e1000_up(struct e1000_adapter *adapter)
 
 void e1000_power_up_phy(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u16 mii_reg = 0;
 
 	/* Just clear the power down bit to wake the phy back up */
-	if (adapter->hw.media_type == e1000_media_type_copper) {
+	if (hw->media_type == e1000_media_type_copper) {
 		/* according to the manual, the phy will retain its
 		 * settings across a power-down/up cycle */
-		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+		e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
 		mii_reg &= ~MII_CR_POWER_DOWN;
-		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+		e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
 	}
 }
 
 static void e1000_power_down_phy(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
+
 	/* Power down the PHY so no link is implied when interface is down *
 	 * The PHY cannot be powered down if any of the following is true *
 	 * (a) WoL is enabled
 	 * (b) AMT is active
 	 * (c) SoL/IDER session is active */
-	if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
-	   adapter->hw.media_type == e1000_media_type_copper) {
+	if (!adapter->wol && hw->mac_type >= e1000_82540 &&
+	   hw->media_type == e1000_media_type_copper) {
 		u16 mii_reg = 0;
 
-		switch (adapter->hw.mac_type) {
+		switch (hw->mac_type) {
 		case e1000_82540:
 		case e1000_82545:
 		case e1000_82545_rev_3:
@@ -557,8 +570,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
 		case e1000_82541_rev_2:
 		case e1000_82547:
 		case e1000_82547_rev_2:
-			if (E1000_READ_REG(&adapter->hw, MANC) &
-			    E1000_MANC_SMBUS_EN)
+			if (er32(MANC) & E1000_MANC_SMBUS_EN)
 				goto out;
 			break;
 		case e1000_82571:
@@ -566,16 +578,16 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
 		case e1000_82573:
 		case e1000_80003es2lan:
 		case e1000_ich8lan:
-			if (e1000_check_mng_mode(&adapter->hw) ||
-			    e1000_check_phy_reset_block(&adapter->hw))
+			if (e1000_check_mng_mode(hw) ||
+			    e1000_check_phy_reset_block(hw))
 				goto out;
 			break;
 		default:
 			goto out;
 		}
-		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+		e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
 		mii_reg |= MII_CR_POWER_DOWN;
-		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+		e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
 		mdelay(1);
 	}
 out:
@@ -622,6 +634,7 @@ void e1000_reinit_locked(struct e1000_adapter *adapter)
 
 void e1000_reset(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u32 pba = 0, tx_space, min_tx_space, min_rx_space;
 	u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
 	bool legacy_pba_adjust = false;
@@ -630,7 +643,7 @@ void e1000_reset(struct e1000_adapter *adapter)
 	 * To take effect CTRL.RST is required.
 	 */
 
-	switch (adapter->hw.mac_type) {
+	switch (hw->mac_type) {
 	case e1000_82542_rev2_0:
 	case e1000_82542_rev2_1:
 	case e1000_82543:
@@ -671,16 +684,16 @@ void e1000_reset(struct e1000_adapter *adapter)
 		if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
 			pba -= 8; /* allocate more FIFO for Tx */
 
-		if (adapter->hw.mac_type == e1000_82547) {
+		if (hw->mac_type == e1000_82547) {
 			adapter->tx_fifo_head = 0;
 			adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
 			adapter->tx_fifo_size =
 				(E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
 			atomic_set(&adapter->tx_fifo_stall, 0);
 		}
-	} else if (adapter->hw.max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
+	} else if (hw->max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
 		/* adjust PBA for jumbo frames */
-		E1000_WRITE_REG(&adapter->hw, PBA, pba);
+		ew32(PBA, pba);
 
 		/* To maintain wire speed transmits, the Tx FIFO should be
 		 * large enough to accomodate two full transmit packets,
@@ -688,7 +701,7 @@ void e1000_reset(struct e1000_adapter *adapter)
 		 * the Rx FIFO should be large enough to accomodate at least
 		 * one full receive packet and is similarly rounded up and
 		 * expressed in KB. */
-		pba = E1000_READ_REG(&adapter->hw, PBA);
+		pba = er32(PBA);
 		/* upper 16 bits has Tx packet buffer allocation size in KB */
 		tx_space = pba >> 16;
 		/* lower 16 bits has Rx packet buffer allocation size in KB */
@@ -711,7 +724,7 @@ void e1000_reset(struct e1000_adapter *adapter)
 			pba = pba - (min_tx_space - tx_space);
 
 			/* PCI/PCIx hardware has PBA alignment constraints */
-			switch (adapter->hw.mac_type) {
+			switch (hw->mac_type) {
 			case e1000_82545 ... e1000_82546_rev_3:
 				pba &= ~(E1000_PBA_8K - 1);
 				break;
@@ -722,7 +735,7 @@ void e1000_reset(struct e1000_adapter *adapter)
 			/* if short on rx space, rx wins and must trump tx
 			 * adjustment or use Early Receive if available */
 			if (pba < min_rx_space) {
-				switch (adapter->hw.mac_type) {
+				switch (hw->mac_type) {
 				case e1000_82573:
 					/* ERT enabled in e1000_configure_rx */
 					break;
@@ -734,7 +747,7 @@ void e1000_reset(struct e1000_adapter *adapter)
 		}
 	}
 
-	E1000_WRITE_REG(&adapter->hw, PBA, pba);
+	ew32(PBA, pba);
 
 	/* flow control settings */
 	/* Set the FC high water mark to 90% of the FIFO size.
@@ -747,54 +760,54 @@ void e1000_reset(struct e1000_adapter *adapter)
 	if (pba < E1000_PBA_16K)
 		fc_high_water_mark = (pba * 1024) - 1600;
 
-	adapter->hw.fc_high_water = fc_high_water_mark;
-	adapter->hw.fc_low_water = fc_high_water_mark - 8;
-	if (adapter->hw.mac_type == e1000_80003es2lan)
-		adapter->hw.fc_pause_time = 0xFFFF;
+	hw->fc_high_water = fc_high_water_mark;
+	hw->fc_low_water = fc_high_water_mark - 8;
+	if (hw->mac_type == e1000_80003es2lan)
+		hw->fc_pause_time = 0xFFFF;
 	else
-		adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
-	adapter->hw.fc_send_xon = 1;
-	adapter->hw.fc = adapter->hw.original_fc;
+		hw->fc_pause_time = E1000_FC_PAUSE_TIME;
+	hw->fc_send_xon = 1;
+	hw->fc = hw->original_fc;
 
 	/* Allow time for pending master requests to run */
-	e1000_reset_hw(&adapter->hw);
-	if (adapter->hw.mac_type >= e1000_82544)
-		E1000_WRITE_REG(&adapter->hw, WUC, 0);
+	e1000_reset_hw(hw);
+	if (hw->mac_type >= e1000_82544)
+		ew32(WUC, 0);
 
-	if (e1000_init_hw(&adapter->hw))
+	if (e1000_init_hw(hw))
 		DPRINTK(PROBE, ERR, "Hardware Error\n");
 	e1000_update_mng_vlan(adapter);
 
 	/* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
-	if (adapter->hw.mac_type >= e1000_82544 &&
-	    adapter->hw.mac_type <= e1000_82547_rev_2 &&
-	    adapter->hw.autoneg == 1 &&
-	    adapter->hw.autoneg_advertised == ADVERTISE_1000_FULL) {
-		u32 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+	if (hw->mac_type >= e1000_82544 &&
+	    hw->mac_type <= e1000_82547_rev_2 &&
+	    hw->autoneg == 1 &&
+	    hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+		u32 ctrl = er32(CTRL);
 		/* clear phy power management bit if we are in gig only mode,
 		 * which if enabled will attempt negotiation to 100Mb, which
 		 * can cause a loss of link at power off or driver unload */
 		ctrl &= ~E1000_CTRL_SWDPIN3;
-		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+		ew32(CTRL, ctrl);
 	}
 
 	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
-	E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
+	ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
 
-	e1000_reset_adaptive(&adapter->hw);
-	e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
+	e1000_reset_adaptive(hw);
+	e1000_phy_get_info(hw, &adapter->phy_info);
 
 	if (!adapter->smart_power_down &&
-	    (adapter->hw.mac_type == e1000_82571 ||
-	     adapter->hw.mac_type == e1000_82572)) {
+	    (hw->mac_type == e1000_82571 ||
+	     hw->mac_type == e1000_82572)) {
 		u16 phy_data = 0;
 		/* speed up time to link by disabling smart power down, ignore
 		 * the return value of this function because there is nothing
 		 * different we would do if it failed */
-		e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+		e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
 		                   &phy_data);
 		phy_data &= ~IGP02E1000_PM_SPD;
-		e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+		e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
 		                    phy_data);
 	}
 
@@ -871,12 +884,12 @@ static void e1000_dump_eeprom(struct e1000_adapter *adapter)
  * and a hardware reset occur.
  **/
 
-static int __devinit
-e1000_probe(struct pci_dev *pdev,
-            const struct pci_device_id *ent)
+static int __devinit e1000_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *ent)
 {
 	struct net_device *netdev;
 	struct e1000_adapter *adapter;
+	struct e1000_hw *hw;
 
 	static int cards_found = 0;
 	static int global_quad_port_a = 0; /* global ksp3 port a indication */
@@ -916,20 +929,22 @@ e1000_probe(struct pci_dev *pdev,
 	adapter = netdev_priv(netdev);
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
-	adapter->hw.back = adapter;
 	adapter->msg_enable = (1 << debug) - 1;
 
+	hw = &adapter->hw;
+	hw->back = adapter;
+
 	err = -EIO;
-	adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
-				      pci_resource_len(pdev, BAR_0));
-	if (!adapter->hw.hw_addr)
+	hw->hw_addr = ioremap(pci_resource_start(pdev, BAR_0),
+			      pci_resource_len(pdev, BAR_0));
+	if (!hw->hw_addr)
 		goto err_ioremap;
 
 	for (i = BAR_1; i <= BAR_5; i++) {
 		if (pci_resource_len(pdev, i) == 0)
 			continue;
 		if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
-			adapter->hw.io_base = pci_resource_start(pdev, i);
+			hw->io_base = pci_resource_start(pdev, i);
 			break;
 		}
 	}
@@ -966,43 +981,43 @@ e1000_probe(struct pci_dev *pdev,
 	err = -EIO;
 	/* Flash BAR mapping must happen after e1000_sw_init
 	 * because it depends on mac_type */
-	if ((adapter->hw.mac_type == e1000_ich8lan) &&
+	if ((hw->mac_type == e1000_ich8lan) &&
 	   (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
-		adapter->hw.flash_address =
+		hw->flash_address =
 			ioremap(pci_resource_start(pdev, 1),
 				pci_resource_len(pdev, 1));
-		if (!adapter->hw.flash_address)
+		if (!hw->flash_address)
 			goto err_flashmap;
 	}
 
-	if (e1000_check_phy_reset_block(&adapter->hw))
+	if (e1000_check_phy_reset_block(hw))
 		DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 
-	if (adapter->hw.mac_type >= e1000_82543) {
+	if (hw->mac_type >= e1000_82543) {
 		netdev->features = NETIF_F_SG |
 				   NETIF_F_HW_CSUM |
 				   NETIF_F_HW_VLAN_TX |
 				   NETIF_F_HW_VLAN_RX |
 				   NETIF_F_HW_VLAN_FILTER;
-		if (adapter->hw.mac_type == e1000_ich8lan)
+		if (hw->mac_type == e1000_ich8lan)
 			netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
 	}
 
-	if ((adapter->hw.mac_type >= e1000_82544) &&
-	   (adapter->hw.mac_type != e1000_82547))
+	if ((hw->mac_type >= e1000_82544) &&
+	   (hw->mac_type != e1000_82547))
 		netdev->features |= NETIF_F_TSO;
 
-	if (adapter->hw.mac_type > e1000_82547_rev_2)
+	if (hw->mac_type > e1000_82547_rev_2)
 		netdev->features |= NETIF_F_TSO6;
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
 	netdev->features |= NETIF_F_LLTX;
 
-	adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
+	adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
 
 	/* initialize eeprom parameters */
-	if (e1000_init_eeprom_params(&adapter->hw)) {
+	if (e1000_init_eeprom_params(hw)) {
 		E1000_ERR("EEPROM initialization failed\n");
 		goto err_eeprom;
 	}
@@ -1010,10 +1025,10 @@ e1000_probe(struct pci_dev *pdev,
 	/* before reading the EEPROM, reset the controller to
 	 * put the device in a known good starting state */
 
-	e1000_reset_hw(&adapter->hw);
+	e1000_reset_hw(hw);
 
 	/* make sure the EEPROM is good */
-	if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
+	if (e1000_validate_eeprom_checksum(hw) < 0) {
 		DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
 		e1000_dump_eeprom(adapter);
 		/*
@@ -1024,20 +1039,20 @@ e1000_probe(struct pci_dev *pdev,
 		 * interface after manually setting a hw addr using
 		 * `ip set address`
 		 */
-		memset(adapter->hw.mac_addr, 0, netdev->addr_len);
+		memset(hw->mac_addr, 0, netdev->addr_len);
 	} else {
 		/* copy the MAC address out of the EEPROM */
-		if (e1000_read_mac_addr(&adapter->hw))
+		if (e1000_read_mac_addr(hw))
 			DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
 	}
 	/* don't block initalization here due to bad MAC address */
-	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
-	memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
+	memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
+	memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
 
 	if (!is_valid_ether_addr(netdev->perm_addr))
 		DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
 
-	e1000_get_bus_info(&adapter->hw);
+	e1000_get_bus_info(hw);
 
 	init_timer(&adapter->tx_fifo_stall_timer);
 	adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
@@ -1060,18 +1075,18 @@ e1000_probe(struct pci_dev *pdev,
 	 * enable the ACPI Magic Packet filter
 	 */
 
-	switch (adapter->hw.mac_type) {
+	switch (hw->mac_type) {
 	case e1000_82542_rev2_0:
 	case e1000_82542_rev2_1:
 	case e1000_82543:
 		break;
 	case e1000_82544:
-		e1000_read_eeprom(&adapter->hw,
+		e1000_read_eeprom(hw,
 			EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
 		eeprom_apme_mask = E1000_EEPROM_82544_APM;
 		break;
 	case e1000_ich8lan:
-		e1000_read_eeprom(&adapter->hw,
+		e1000_read_eeprom(hw,
 			EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
 		eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
 		break;
@@ -1079,14 +1094,14 @@ e1000_probe(struct pci_dev *pdev,
 	case e1000_82546_rev_3:
 	case e1000_82571:
 	case e1000_80003es2lan:
-		if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
-			e1000_read_eeprom(&adapter->hw,
+		if (er32(STATUS) & E1000_STATUS_FUNC_1){
+			e1000_read_eeprom(hw,
 				EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
 			break;
 		}
 		/* Fall Through */
 	default:
-		e1000_read_eeprom(&adapter->hw,
+		e1000_read_eeprom(hw,
 			EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
 		break;
 	}
@@ -1105,7 +1120,7 @@ e1000_probe(struct pci_dev *pdev,
 	case E1000_DEV_ID_82571EB_FIBER:
 		/* Wake events only supported on port A for dual fiber
 		 * regardless of eeprom setting */
-		if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
+		if (er32(STATUS) & E1000_STATUS_FUNC_1)
 			adapter->eeprom_wol = 0;
 		break;
 	case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
@@ -1128,8 +1143,6 @@ e1000_probe(struct pci_dev *pdev,
 	adapter->wol = adapter->eeprom_wol;
 
 	/* print bus type/speed/width info */
-	{
-	struct e1000_hw *hw = &adapter->hw;
 	DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
 		((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
 		 (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
@@ -1142,11 +1155,10 @@ e1000_probe(struct pci_dev *pdev,
 		 (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
 		 (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
 		 "32-bit"));
-	}
 
 	printk("%s\n", print_mac(mac, netdev->dev_addr));
 
-	if (adapter->hw.bus_type == e1000_bus_type_pci_express) {
+	if (hw->bus_type == e1000_bus_type_pci_express) {
 		DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no "
 			"longer be supported by this driver in the future.\n",
 			pdev->vendor, pdev->device);
@@ -1161,8 +1173,8 @@ e1000_probe(struct pci_dev *pdev,
 	 * DRV_LOAD until the interface is up.  For all other cases,
 	 * let the f/w know that the h/w is now under the control
 	 * of the driver. */
-	if (adapter->hw.mac_type != e1000_82573 ||
-	    !e1000_check_mng_mode(&adapter->hw))
+	if (hw->mac_type != e1000_82573 ||
+	    !e1000_check_mng_mode(hw))
 		e1000_get_hw_control(adapter);
 
 	/* tell the stack to leave us alone until e1000_open() is called */
@@ -1181,11 +1193,11 @@ e1000_probe(struct pci_dev *pdev,
 err_register:
 	e1000_release_hw_control(adapter);
 err_eeprom:
-	if (!e1000_check_phy_reset_block(&adapter->hw))
-		e1000_phy_hw_reset(&adapter->hw);
+	if (!e1000_check_phy_reset_block(hw))
+		e1000_phy_hw_reset(hw);
 
-	if (adapter->hw.flash_address)
-		iounmap(adapter->hw.flash_address);
+	if (hw->flash_address)
+		iounmap(hw->flash_address);
 err_flashmap:
 #ifdef CONFIG_E1000_NAPI
 	for (i = 0; i < adapter->num_rx_queues; i++)
@@ -1198,7 +1210,7 @@ err_flashmap:
 	kfree(adapter->polling_netdev);
 #endif
 err_sw_init:
-	iounmap(adapter->hw.hw_addr);
+	iounmap(hw->hw_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
@@ -1223,6 +1235,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 #ifdef CONFIG_E1000_NAPI
 	int i;
 #endif
@@ -1242,8 +1255,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 
 	unregister_netdev(netdev);
 
-	if (!e1000_check_phy_reset_block(&adapter->hw))
-		e1000_phy_hw_reset(&adapter->hw);
+	if (!e1000_check_phy_reset_block(hw))
+		e1000_phy_hw_reset(hw);
 
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
@@ -1251,9 +1264,9 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	kfree(adapter->polling_netdev);
 #endif
 
-	iounmap(adapter->hw.hw_addr);
-	if (adapter->hw.flash_address)
-		iounmap(adapter->hw.flash_address);
+	iounmap(hw->hw_addr);
+	if (hw->flash_address)
+		iounmap(hw->flash_address);
 	pci_release_regions(pdev);
 
 	free_netdev(netdev);
@@ -1407,6 +1420,7 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
 static int e1000_open(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	int err;
 
 	/* disallow open during test */
@@ -1426,15 +1440,15 @@ static int e1000_open(struct net_device *netdev)
 	e1000_power_up_phy(adapter);
 
 	adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
-	if ((adapter->hw.mng_cookie.status &
+	if ((hw->mng_cookie.status &
 			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
 		e1000_update_mng_vlan(adapter);
 	}
 
 	/* If AMT is enabled, let the firmware know that the network
 	 * interface is now open */
-	if (adapter->hw.mac_type == e1000_82573 &&
-	    e1000_check_mng_mode(&adapter->hw))
+	if (hw->mac_type == e1000_82573 &&
+	    e1000_check_mng_mode(hw))
 		e1000_get_hw_control(adapter);
 
 	/* before we allocate an interrupt, we must be ready to handle it.
@@ -1459,7 +1473,7 @@ static int e1000_open(struct net_device *netdev)
 	netif_start_queue(netdev);
 
 	/* fire a link status change interrupt to start the watchdog */
-	E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
+	ew32(ICS, E1000_ICS_LSC);
 
 	return E1000_SUCCESS;
 
@@ -1490,6 +1504,7 @@ err_setup_tx:
 static int e1000_close(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 
 	WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
 	e1000_down(adapter);
@@ -1501,7 +1516,7 @@ static int e1000_close(struct net_device *netdev)
 
 	/* kill manageability vlan ID if supported, but not if a vlan with
 	 * the same ID is registered on the host OS (let 8021q kill it) */
-	if ((adapter->hw.mng_cookie.status &
+	if ((hw->mng_cookie.status &
 			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
 	     !(adapter->vlgrp &&
 	       vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
@@ -1510,8 +1525,8 @@ static int e1000_close(struct net_device *netdev)
 
 	/* If AMT is enabled, let the firmware know that the network
 	 * interface is now closed */
-	if (adapter->hw.mac_type == e1000_82573 &&
-	    e1000_check_mng_mode(&adapter->hw))
+	if (hw->mac_type == e1000_82573 &&
+	    e1000_check_mng_mode(hw))
 		e1000_release_hw_control(adapter);
 
 	return 0;
@@ -1526,13 +1541,14 @@ static int e1000_close(struct net_device *netdev)
 static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
 				  unsigned long len)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	unsigned long begin = (unsigned long) start;
 	unsigned long end = begin + len;
 
 	/* First rev 82545 and 82546 need to not allow any memory
 	 * write location to cross 64k boundary due to errata 23 */
-	if (adapter->hw.mac_type == e1000_82545 ||
-	    adapter->hw.mac_type == e1000_82546) {
+	if (hw->mac_type == e1000_82545 ||
+	    hw->mac_type == e1000_82546) {
 		return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
 	}
 
@@ -1663,18 +1679,18 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 		tdba = adapter->tx_ring[0].dma;
 		tdlen = adapter->tx_ring[0].count *
 			sizeof(struct e1000_tx_desc);
-		E1000_WRITE_REG(hw, TDLEN, tdlen);
-		E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
-		E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
-		E1000_WRITE_REG(hw, TDT, 0);
-		E1000_WRITE_REG(hw, TDH, 0);
+		ew32(TDLEN, tdlen);
+		ew32(TDBAH, (tdba >> 32));
+		ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
+		ew32(TDT, 0);
+		ew32(TDH, 0);
 		adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
 		adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
 		break;
 	}
 
 	/* Set the default values for the Tx Inter Packet Gap timer */
-	if (adapter->hw.mac_type <= e1000_82547_rev_2 &&
+	if (hw->mac_type <= e1000_82547_rev_2 &&
 	    (hw->media_type == e1000_media_type_fiber ||
 	     hw->media_type == e1000_media_type_internal_serdes))
 		tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
@@ -1699,34 +1715,34 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 	}
 	tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
 	tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
-	E1000_WRITE_REG(hw, TIPG, tipg);
+	ew32(TIPG, tipg);
 
 	/* Set the Tx Interrupt Delay register */
 
-	E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
+	ew32(TIDV, adapter->tx_int_delay);
 	if (hw->mac_type >= e1000_82540)
-		E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
+		ew32(TADV, adapter->tx_abs_int_delay);
 
 	/* Program the Transmit Control Register */
 
-	tctl = E1000_READ_REG(hw, TCTL);
+	tctl = er32(TCTL);
 	tctl &= ~E1000_TCTL_CT;
 	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
 		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
 
 	if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
-		tarc = E1000_READ_REG(hw, TARC0);
+		tarc = er32(TARC0);
 		/* set the speed mode bit, we'll clear it if we're not at
 		 * gigabit link later */
 		tarc |= (1 << 21);
-		E1000_WRITE_REG(hw, TARC0, tarc);
+		ew32(TARC0, tarc);
 	} else if (hw->mac_type == e1000_80003es2lan) {
-		tarc = E1000_READ_REG(hw, TARC0);
+		tarc = er32(TARC0);
 		tarc |= 1;
-		E1000_WRITE_REG(hw, TARC0, tarc);
-		tarc = E1000_READ_REG(hw, TARC1);
+		ew32(TARC0, tarc);
+		tarc = er32(TARC1);
 		tarc |= 1;
-		E1000_WRITE_REG(hw, TARC1, tarc);
+		ew32(TARC1, tarc);
 	}
 
 	e1000_config_collision_dist(hw);
@@ -1749,7 +1765,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 	    hw->bus_type == e1000_bus_type_pcix)
 		adapter->pcix_82544 = 1;
 
-	E1000_WRITE_REG(hw, TCTL, tctl);
+	ew32(TCTL, tctl);
 
 }
 
@@ -1764,6 +1780,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 				    struct e1000_rx_ring *rxdr)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
 	int size, desc_len;
 
@@ -1796,7 +1813,7 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 		return -ENOMEM;
 	}
 
-	if (adapter->hw.mac_type <= e1000_82547_rev_2)
+	if (hw->mac_type <= e1000_82547_rev_2)
 		desc_len = sizeof(struct e1000_rx_desc);
 	else
 		desc_len = sizeof(union e1000_rx_desc_packet_split);
@@ -1892,21 +1909,22 @@ int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
 			(((S) & (PAGE_SIZE - 1)) ? 1 : 0))
 static void e1000_setup_rctl(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl, rfctl;
 	u32 psrctl = 0;
 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
 	u32 pages = 0;
 #endif
 
-	rctl = E1000_READ_REG(&adapter->hw, RCTL);
+	rctl = er32(RCTL);
 
 	rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
 
 	rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
 		E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
-		(adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
+		(hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
 
-	if (adapter->hw.tbi_compatibility_on == 1)
+	if (hw->tbi_compatibility_on == 1)
 		rctl |= E1000_RCTL_SBP;
 	else
 		rctl &= ~E1000_RCTL_SBP;
@@ -1959,7 +1977,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	/* allocations using alloc_page take too long for regular MTU
 	 * so only enable packet split for jumbo frames */
 	pages = PAGE_USE_COUNT(adapter->netdev->mtu);
-	if ((adapter->hw.mac_type >= e1000_82571) && (pages <= 3) &&
+	if ((hw->mac_type >= e1000_82571) && (pages <= 3) &&
 	    PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
 		adapter->rx_ps_pages = pages;
 	else
@@ -1967,14 +1985,14 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 #endif
 	if (adapter->rx_ps_pages) {
 		/* Configure extra packet-split registers */
-		rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
+		rfctl = er32(RFCTL);
 		rfctl |= E1000_RFCTL_EXTEN;
 		/* disable packet split support for IPv6 extension headers,
 		 * because some malformed IPv6 headers can hang the RX */
 		rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
 		          E1000_RFCTL_NEW_IPV6_EXT_DIS);
 
-		E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
+		ew32(RFCTL, rfctl);
 
 		rctl |= E1000_RCTL_DTYP_PS;
 
@@ -1994,10 +2012,10 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 			break;
 		}
 
-		E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
+		ew32(PSRCTL, psrctl);
 	}
 
-	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+	ew32(RCTL, rctl);
 }
 
 /**
@@ -2027,30 +2045,29 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 	}
 
 	/* disable receives while setting up the descriptors */
-	rctl = E1000_READ_REG(hw, RCTL);
-	E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+	rctl = er32(RCTL);
+	ew32(RCTL, rctl & ~E1000_RCTL_EN);
 
 	/* set the Receive Delay Timer Register */
-	E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
+	ew32(RDTR, adapter->rx_int_delay);
 
 	if (hw->mac_type >= e1000_82540) {
-		E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
+		ew32(RADV, adapter->rx_abs_int_delay);
 		if (adapter->itr_setting != 0)
-			E1000_WRITE_REG(hw, ITR,
-				1000000000 / (adapter->itr * 256));
+			ew32(ITR, 1000000000 / (adapter->itr * 256));
 	}
 
 	if (hw->mac_type >= e1000_82571) {
-		ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+		ctrl_ext = er32(CTRL_EXT);
 		/* Reset delay timers after every interrupt */
 		ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
 #ifdef CONFIG_E1000_NAPI
 		/* Auto-Mask interrupts upon ICR access */
 		ctrl_ext |= E1000_CTRL_EXT_IAME;
-		E1000_WRITE_REG(hw, IAM, 0xffffffff);
+		ew32(IAM, 0xffffffff);
 #endif
-		E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
-		E1000_WRITE_FLUSH(hw);
+		ew32(CTRL_EXT, ctrl_ext);
+		E1000_WRITE_FLUSH();
 	}
 
 	/* Setup the HW Rx Head and Tail Descriptor Pointers and
@@ -2059,11 +2076,11 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 	case 1:
 	default:
 		rdba = adapter->rx_ring[0].dma;
-		E1000_WRITE_REG(hw, RDLEN, rdlen);
-		E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
-		E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
-		E1000_WRITE_REG(hw, RDT, 0);
-		E1000_WRITE_REG(hw, RDH, 0);
+		ew32(RDLEN, rdlen);
+		ew32(RDBAH, (rdba >> 32));
+		ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
+		ew32(RDT, 0);
+		ew32(RDH, 0);
 		adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
 		adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
 		break;
@@ -2071,7 +2088,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 
 	/* Enable 82543 Receive Checksum Offload for TCP and UDP */
 	if (hw->mac_type >= e1000_82543) {
-		rxcsum = E1000_READ_REG(hw, RXCSUM);
+		rxcsum = er32(RXCSUM);
 		if (adapter->rx_csum) {
 			rxcsum |= E1000_RXCSUM_TUOFL;
 
@@ -2085,17 +2102,17 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 			rxcsum &= ~E1000_RXCSUM_TUOFL;
 			/* don't need to clear IPPCSE as it defaults to 0 */
 		}
-		E1000_WRITE_REG(hw, RXCSUM, rxcsum);
+		ew32(RXCSUM, rxcsum);
 	}
 
 	/* enable early receives on 82573, only takes effect if using > 2048
 	 * byte total frame size.  for example only for jumbo frames */
 #define E1000_ERT_2048 0x100
 	if (hw->mac_type == e1000_82573)
-		E1000_WRITE_REG(hw, ERT, E1000_ERT_2048);
+		ew32(ERT, E1000_ERT_2048);
 
 	/* Enable Receives */
-	E1000_WRITE_REG(hw, RCTL, rctl);
+	ew32(RCTL, rctl);
 }
 
 /**
@@ -2162,6 +2179,7 @@ static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
 				struct e1000_tx_ring *tx_ring)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_buffer *buffer_info;
 	unsigned long size;
 	unsigned int i;
@@ -2184,8 +2202,8 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
 	tx_ring->next_to_clean = 0;
 	tx_ring->last_tx_tso = 0;
 
-	writel(0, adapter->hw.hw_addr + tx_ring->tdh);
-	writel(0, adapter->hw.hw_addr + tx_ring->tdt);
+	writel(0, hw->hw_addr + tx_ring->tdh);
+	writel(0, hw->hw_addr + tx_ring->tdt);
 }
 
 /**
@@ -2252,6 +2270,7 @@ void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 				struct e1000_rx_ring *rx_ring)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_buffer *buffer_info;
 	struct e1000_ps_page *ps_page;
 	struct e1000_ps_page_dma *ps_page_dma;
@@ -2298,8 +2317,8 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
 
-	writel(0, adapter->hw.hw_addr + rx_ring->rdh);
-	writel(0, adapter->hw.hw_addr + rx_ring->rdt);
+	writel(0, hw->hw_addr + rx_ring->rdh);
+	writel(0, hw->hw_addr + rx_ring->rdt);
 }
 
 /**
@@ -2320,15 +2339,16 @@ static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
  */
 static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	u32 rctl;
 
-	e1000_pci_clear_mwi(&adapter->hw);
+	e1000_pci_clear_mwi(hw);
 
-	rctl = E1000_READ_REG(&adapter->hw, RCTL);
+	rctl = er32(RCTL);
 	rctl |= E1000_RCTL_RST;
-	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-	E1000_WRITE_FLUSH(&adapter->hw);
+	ew32(RCTL, rctl);
+	E1000_WRITE_FLUSH();
 	mdelay(5);
 
 	if (netif_running(netdev))
@@ -2337,17 +2357,18 @@ static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
 
 static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	u32 rctl;
 
-	rctl = E1000_READ_REG(&adapter->hw, RCTL);
+	rctl = er32(RCTL);
 	rctl &= ~E1000_RCTL_RST;
-	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-	E1000_WRITE_FLUSH(&adapter->hw);
+	ew32(RCTL, rctl);
+	E1000_WRITE_FLUSH();
 	mdelay(5);
 
-	if (adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE)
-		e1000_pci_set_mwi(&adapter->hw);
+	if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+		e1000_pci_set_mwi(hw);
 
 	if (netif_running(netdev)) {
 		/* No need to loop, because 82542 supports only 1 queue */
@@ -2368,6 +2389,7 @@ static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
 static int e1000_set_mac(struct net_device *netdev, void *p)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	struct sockaddr *addr = p;
 
 	if (!is_valid_ether_addr(addr->sa_data))
@@ -2375,19 +2397,19 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
 
 	/* 82542 2.0 needs to be in reset to write receive address registers */
 
-	if (adapter->hw.mac_type == e1000_82542_rev2_0)
+	if (hw->mac_type == e1000_82542_rev2_0)
 		e1000_enter_82542_rst(adapter);
 
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-	memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+	memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
 
-	e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
+	e1000_rar_set(hw, hw->mac_addr, 0);
 
 	/* With 82571 controllers, LAA may be overwritten (with the default)
 	 * due to controller reset from the other port. */
-	if (adapter->hw.mac_type == e1000_82571) {
+	if (hw->mac_type == e1000_82571) {
 		/* activate the work around */
-		adapter->hw.laa_is_present = 1;
+		hw->laa_is_present = 1;
 
 		/* Hold a copy of the LAA in RAR[14] This is done so that
 		 * between the time RAR[0] gets clobbered  and the time it
@@ -2395,11 +2417,11 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
 		 * of the RARs and no incoming packets directed to this port
 		 * are dropped. Eventaully the LAA will be in RAR[0] and
 		 * RAR[14] */
-		e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
+		e1000_rar_set(hw, hw->mac_addr,
 					E1000_RAR_ENTRIES - 1);
 	}
 
-	if (adapter->hw.mac_type == e1000_82542_rev2_0)
+	if (hw->mac_type == e1000_82542_rev2_0)
 		e1000_leave_82542_rst(adapter);
 
 	return 0;
@@ -2428,16 +2450,16 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 				E1000_NUM_MTA_REGISTERS_ICH8LAN :
 				E1000_NUM_MTA_REGISTERS;
 
-	if (adapter->hw.mac_type == e1000_ich8lan)
+	if (hw->mac_type == e1000_ich8lan)
 		rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
 
 	/* reserve RAR[14] for LAA over-write work-around */
-	if (adapter->hw.mac_type == e1000_82571)
+	if (hw->mac_type == e1000_82571)
 		rar_entries--;
 
 	/* Check for Promiscuous and All Multicast modes */
 
-	rctl = E1000_READ_REG(hw, RCTL);
+	rctl = er32(RCTL);
 
 	if (netdev->flags & IFF_PROMISC) {
 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
@@ -2460,7 +2482,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 		uc_ptr = netdev->uc_list;
 	}
 
-	E1000_WRITE_REG(hw, RCTL, rctl);
+	ew32(RCTL, rctl);
 
 	/* 82542 2.0 needs to be in reset to write receive address registers */
 
@@ -2486,9 +2508,9 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 			mc_ptr = mc_ptr->next;
 		} else {
 			E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
-			E1000_WRITE_FLUSH(hw);
+			E1000_WRITE_FLUSH();
 			E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
-			E1000_WRITE_FLUSH(hw);
+			E1000_WRITE_FLUSH();
 		}
 	}
 	WARN_ON(uc_ptr != NULL);
@@ -2497,7 +2519,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 
 	for (i = 0; i < mta_reg_count; i++) {
 		E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
-		E1000_WRITE_FLUSH(hw);
+		E1000_WRITE_FLUSH();
 	}
 
 	/* load any remaining addresses into the hash table */
@@ -2517,7 +2539,8 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 static void e1000_update_phy_info(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-	e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
+	struct e1000_hw *hw = &adapter->hw;
+	e1000_phy_get_info(hw, &adapter->phy_info);
 }
 
 /**
@@ -2528,29 +2551,22 @@ static void e1000_update_phy_info(unsigned long data)
 static void e1000_82547_tx_fifo_stall(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	u32 tctl;
 
 	if (atomic_read(&adapter->tx_fifo_stall)) {
-		if ((E1000_READ_REG(&adapter->hw, TDT) ==
-		    E1000_READ_REG(&adapter->hw, TDH)) &&
-		   (E1000_READ_REG(&adapter->hw, TDFT) ==
-		    E1000_READ_REG(&adapter->hw, TDFH)) &&
-		   (E1000_READ_REG(&adapter->hw, TDFTS) ==
-		    E1000_READ_REG(&adapter->hw, TDFHS))) {
-			tctl = E1000_READ_REG(&adapter->hw, TCTL);
-			E1000_WRITE_REG(&adapter->hw, TCTL,
-					tctl & ~E1000_TCTL_EN);
-			E1000_WRITE_REG(&adapter->hw, TDFT,
-					adapter->tx_head_addr);
-			E1000_WRITE_REG(&adapter->hw, TDFH,
-					adapter->tx_head_addr);
-			E1000_WRITE_REG(&adapter->hw, TDFTS,
-					adapter->tx_head_addr);
-			E1000_WRITE_REG(&adapter->hw, TDFHS,
-					adapter->tx_head_addr);
-			E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
-			E1000_WRITE_FLUSH(&adapter->hw);
+		if ((er32(TDT) == er32(TDH)) &&
+		   (er32(TDFT) == er32(TDFH)) &&
+		   (er32(TDFTS) == er32(TDFHS))) {
+			tctl = er32(TCTL);
+			ew32(TCTL, tctl & ~E1000_TCTL_EN);
+			ew32(TDFT, adapter->tx_head_addr);
+			ew32(TDFH, adapter->tx_head_addr);
+			ew32(TDFTS, adapter->tx_head_addr);
+			ew32(TDFHS, adapter->tx_head_addr);
+			ew32(TCTL, tctl);
+			E1000_WRITE_FLUSH();
 
 			adapter->tx_fifo_head = 0;
 			atomic_set(&adapter->tx_fifo_stall, 0);
@@ -2568,41 +2584,42 @@ static void e1000_82547_tx_fifo_stall(unsigned long data)
 static void e1000_watchdog(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_tx_ring *txdr = adapter->tx_ring;
 	u32 link, tctl;
 	s32 ret_val;
 
-	ret_val = e1000_check_for_link(&adapter->hw);
+	ret_val = e1000_check_for_link(hw);
 	if ((ret_val == E1000_ERR_PHY) &&
-	    (adapter->hw.phy_type == e1000_phy_igp_3) &&
-	    (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+	    (hw->phy_type == e1000_phy_igp_3) &&
+	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
 		/* See e1000_kumeran_lock_loss_workaround() */
 		DPRINTK(LINK, INFO,
 			"Gigabit has been disabled, downgrading speed\n");
 	}
 
-	if (adapter->hw.mac_type == e1000_82573) {
-		e1000_enable_tx_pkt_filtering(&adapter->hw);
-		if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
+	if (hw->mac_type == e1000_82573) {
+		e1000_enable_tx_pkt_filtering(hw);
+		if (adapter->mng_vlan_id != hw->mng_cookie.vlan_id)
 			e1000_update_mng_vlan(adapter);
 	}
 
-	if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
-	   !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE))
-		link = !adapter->hw.serdes_link_down;
+	if ((hw->media_type == e1000_media_type_internal_serdes) &&
+	   !(er32(TXCW) & E1000_TXCW_ANE))
+		link = !hw->serdes_link_down;
 	else
-		link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
+		link = er32(STATUS) & E1000_STATUS_LU;
 
 	if (link) {
 		if (!netif_carrier_ok(netdev)) {
 			u32 ctrl;
 			bool txb2b = true;
-			e1000_get_speed_and_duplex(&adapter->hw,
+			e1000_get_speed_and_duplex(hw,
 			                           &adapter->link_speed,
 			                           &adapter->link_duplex);
 
-			ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+			ctrl = er32(CTRL);
 			DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s, "
 			        "Flow Control: %s\n",
 			        adapter->link_speed,
@@ -2630,19 +2647,19 @@ static void e1000_watchdog(unsigned long data)
 				break;
 			}
 
-			if ((adapter->hw.mac_type == e1000_82571 ||
-			     adapter->hw.mac_type == e1000_82572) &&
+			if ((hw->mac_type == e1000_82571 ||
+			     hw->mac_type == e1000_82572) &&
 			    !txb2b) {
 				u32 tarc0;
-				tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
+				tarc0 = er32(TARC0);
 				tarc0 &= ~(1 << 21);
-				E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
+				ew32(TARC0, tarc0);
 			}
 
 			/* disable TSO for pcie and 10/100 speeds, to avoid
 			 * some hardware issues */
 			if (!adapter->tso_force &&
-			    adapter->hw.bus_type == e1000_bus_type_pci_express){
+			    hw->bus_type == e1000_bus_type_pci_express){
 				switch (adapter->link_speed) {
 				case SPEED_10:
 				case SPEED_100:
@@ -2663,9 +2680,9 @@ static void e1000_watchdog(unsigned long data)
 
 			/* enable transmits in the hardware, need to do this
 			 * after setting TARC0 */
-			tctl = E1000_READ_REG(&adapter->hw, TCTL);
+			tctl = er32(TCTL);
 			tctl |= E1000_TCTL_EN;
-			E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
+			ew32(TCTL, tctl);
 
 			netif_carrier_on(netdev);
 			netif_wake_queue(netdev);
@@ -2673,10 +2690,9 @@ static void e1000_watchdog(unsigned long data)
 			adapter->smartspeed = 0;
 		} else {
 			/* make sure the receive unit is started */
-			if (adapter->hw.rx_needs_kicking) {
-				struct e1000_hw *hw = &adapter->hw;
-				u32 rctl = E1000_READ_REG(hw, RCTL);
-				E1000_WRITE_REG(hw, RCTL, rctl | E1000_RCTL_EN);
+			if (hw->rx_needs_kicking) {
+				u32 rctl = er32(RCTL);
+				ew32(RCTL, rctl | E1000_RCTL_EN);
 			}
 		}
 	} else {
@@ -2693,7 +2709,7 @@ static void e1000_watchdog(unsigned long data)
 			 * disable receives in the ISR and
 			 * reset device here in the watchdog
 			 */
-			if (adapter->hw.mac_type == e1000_80003es2lan)
+			if (hw->mac_type == e1000_80003es2lan)
 				/* reset device */
 				schedule_work(&adapter->reset_task);
 		}
@@ -2703,9 +2719,9 @@ static void e1000_watchdog(unsigned long data)
 
 	e1000_update_stats(adapter);
 
-	adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+	hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
 	adapter->tpt_old = adapter->stats.tpt;
-	adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
+	hw->collision_delta = adapter->stats.colc - adapter->colc_old;
 	adapter->colc_old = adapter->stats.colc;
 
 	adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
@@ -2713,7 +2729,7 @@ static void e1000_watchdog(unsigned long data)
 	adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
 	adapter->gotcl_old = adapter->stats.gotcl;
 
-	e1000_update_adaptive(&adapter->hw);
+	e1000_update_adaptive(hw);
 
 	if (!netif_carrier_ok(netdev)) {
 		if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
@@ -2727,15 +2743,15 @@ static void e1000_watchdog(unsigned long data)
 	}
 
 	/* Cause software interrupt to ensure rx ring is cleaned */
-	E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
+	ew32(ICS, E1000_ICS_RXDMT0);
 
 	/* Force detection of hung controller every watchdog period */
 	adapter->detect_tx_hung = true;
 
 	/* With 82571 controllers, LAA may be overwritten due to controller
 	 * reset from the other port. Set the appropriate LAA in RAR[0] */
-	if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present)
-		e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
+	if (hw->mac_type == e1000_82571 && hw->laa_is_present)
+		e1000_rar_set(hw, hw->mac_addr, 0);
 
 	/* Reset the timer */
 	mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
@@ -2870,7 +2886,7 @@ set_itr_now:
 		             min(adapter->itr + (new_itr >> 2), new_itr) :
 		             new_itr;
 		adapter->itr = new_itr;
-		E1000_WRITE_REG(hw, ITR, 1000000000 / (new_itr * 256));
+		ew32(ITR, 1000000000 / (new_itr * 256));
 	}
 
 	return;
@@ -2999,6 +3015,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 			unsigned int max_per_txd, unsigned int nr_frags,
 			unsigned int mss)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_buffer *buffer_info;
 	unsigned int len = skb->len;
 	unsigned int offset = 0, size, count = 0, i;
@@ -3029,7 +3046,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 		 * The fix is to make sure that the first descriptor of a
 		 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
 		 */
-		if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
+		if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
 		                (size > 2015) && count == 0))
 		        size = 2015;
 
@@ -3105,6 +3122,7 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
 			   struct e1000_tx_ring *tx_ring, int tx_flags,
 			   int count)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_tx_desc *tx_desc = NULL;
 	struct e1000_buffer *buffer_info;
 	u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
@@ -3150,7 +3168,7 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
 	wmb();
 
 	tx_ring->next_to_use = i;
-	writel(i, adapter->hw.hw_addr + tx_ring->tdt);
+	writel(i, hw->hw_addr + tx_ring->tdt);
 	/* we need this if more than one processor can write to our tail
 	 * at a time, it syncronizes IO on IA64/Altix systems */
 	mmiowb();
@@ -3201,8 +3219,8 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
 	struct e1000_hw *hw =  &adapter->hw;
 	u16 length, offset;
 	if (vlan_tx_tag_present(skb)) {
-		if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
-			( adapter->hw.mng_cookie.status &
+		if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) &&
+			( hw->mng_cookie.status &
 			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
 			return 0;
 	}
@@ -3263,6 +3281,7 @@ static int e1000_maybe_stop_tx(struct net_device *netdev,
 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_tx_ring *tx_ring;
 	unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
 	unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
@@ -3288,7 +3307,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	/* 82571 and newer doesn't need the workaround that limited descriptor
 	 * length to 4kB */
-	if (adapter->hw.mac_type >= e1000_82571)
+	if (hw->mac_type >= e1000_82571)
 		max_per_txd = 8192;
 
 	mss = skb_shinfo(skb)->gso_size;
@@ -3308,7 +3327,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		* frags into skb->data */
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (skb->data_len && hdr_len == len) {
-			switch (adapter->hw.mac_type) {
+			switch (hw->mac_type) {
 				unsigned int pull_size;
 			case e1000_82544:
 				/* Make sure we have room to chop off 4 bytes,
@@ -3357,7 +3376,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	/* work-around for errata 10 and it applies to all controllers
 	 * in PCI-X mode, so add one more descriptor to the count
 	 */
-	if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
+	if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
 			(len > 2015)))
 		count++;
 
@@ -3369,8 +3388,8 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		count += nr_frags;
 
 
-	if (adapter->hw.tx_pkt_filtering &&
-	    (adapter->hw.mac_type == e1000_82573))
+	if (hw->tx_pkt_filtering &&
+	    (hw->mac_type == e1000_82573))
 		e1000_transfer_dhcp_info(adapter, skb);
 
 	if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags))
@@ -3384,7 +3403,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		return NETDEV_TX_BUSY;
 	}
 
-	if (unlikely(adapter->hw.mac_type == e1000_82547)) {
+	if (unlikely(hw->mac_type == e1000_82547)) {
 		if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
 			netif_stop_queue(netdev);
 			mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
@@ -3481,6 +3500,7 @@ static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
 	u16 eeprom_data = 0;
 
@@ -3491,7 +3511,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	}
 
 	/* Adapter-specific max frame size limits. */
-	switch (adapter->hw.mac_type) {
+	switch (hw->mac_type) {
 	case e1000_undefined ... e1000_82542_rev2_1:
 	case e1000_ich8lan:
 		if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
@@ -3503,9 +3523,9 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		/* Jumbo Frames not supported if:
 		 * - this is not an 82573L device
 		 * - ASPM is enabled in any way (0x1A bits 3:2) */
-		e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1,
+		e1000_read_eeprom(hw, EEPROM_INIT_3GIO_3, 1,
 		                  &eeprom_data);
-		if ((adapter->hw.device_id != E1000_DEV_ID_82573L) ||
+		if ((hw->device_id != E1000_DEV_ID_82573L) ||
 		    (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
 			if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
 				DPRINTK(PROBE, ERR,
@@ -3552,13 +3572,13 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		adapter->rx_buffer_len = E1000_RXBUFFER_16384;
 
 	/* adjust allocation if LPE protects us, and we aren't using SBP */
-	if (!adapter->hw.tbi_compatibility_on &&
+	if (!hw->tbi_compatibility_on &&
 	    ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
 	     (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
 		adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
 
 	netdev->mtu = new_mtu;
-	adapter->hw.max_frame_size = max_frame;
+	hw->max_frame_size = max_frame;
 
 	if (netif_running(netdev))
 		e1000_reinit_locked(adapter);
@@ -3596,89 +3616,89 @@ void e1000_update_stats(struct e1000_adapter *adapter)
 	 * be written while holding adapter->stats_lock
 	 */
 
-	adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
-	adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
-	adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
-	adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
-	adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
-	adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
-	adapter->stats.roc += E1000_READ_REG(hw, ROC);
-
-	if (adapter->hw.mac_type != e1000_ich8lan) {
-		adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
-		adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
-		adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
-		adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
-		adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
-		adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
-	}
-
-	adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
-	adapter->stats.mpc += E1000_READ_REG(hw, MPC);
-	adapter->stats.scc += E1000_READ_REG(hw, SCC);
-	adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
-	adapter->stats.mcc += E1000_READ_REG(hw, MCC);
-	adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
-	adapter->stats.dc += E1000_READ_REG(hw, DC);
-	adapter->stats.sec += E1000_READ_REG(hw, SEC);
-	adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
-	adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
-	adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
-	adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
-	adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
-	adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
-	adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
-	adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
-	adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
-	adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
-	adapter->stats.ruc += E1000_READ_REG(hw, RUC);
-	adapter->stats.rfc += E1000_READ_REG(hw, RFC);
-	adapter->stats.rjc += E1000_READ_REG(hw, RJC);
-	adapter->stats.torl += E1000_READ_REG(hw, TORL);
-	adapter->stats.torh += E1000_READ_REG(hw, TORH);
-	adapter->stats.totl += E1000_READ_REG(hw, TOTL);
-	adapter->stats.toth += E1000_READ_REG(hw, TOTH);
-	adapter->stats.tpr += E1000_READ_REG(hw, TPR);
-
-	if (adapter->hw.mac_type != e1000_ich8lan) {
-		adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
-		adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
-		adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
-		adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
-		adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
-		adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
-	}
-
-	adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
-	adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
+	adapter->stats.crcerrs += er32(CRCERRS);
+	adapter->stats.gprc += er32(GPRC);
+	adapter->stats.gorcl += er32(GORCL);
+	adapter->stats.gorch += er32(GORCH);
+	adapter->stats.bprc += er32(BPRC);
+	adapter->stats.mprc += er32(MPRC);
+	adapter->stats.roc += er32(ROC);
+
+	if (hw->mac_type != e1000_ich8lan) {
+		adapter->stats.prc64 += er32(PRC64);
+		adapter->stats.prc127 += er32(PRC127);
+		adapter->stats.prc255 += er32(PRC255);
+		adapter->stats.prc511 += er32(PRC511);
+		adapter->stats.prc1023 += er32(PRC1023);
+		adapter->stats.prc1522 += er32(PRC1522);
+	}
+
+	adapter->stats.symerrs += er32(SYMERRS);
+	adapter->stats.mpc += er32(MPC);
+	adapter->stats.scc += er32(SCC);
+	adapter->stats.ecol += er32(ECOL);
+	adapter->stats.mcc += er32(MCC);
+	adapter->stats.latecol += er32(LATECOL);
+	adapter->stats.dc += er32(DC);
+	adapter->stats.sec += er32(SEC);
+	adapter->stats.rlec += er32(RLEC);
+	adapter->stats.xonrxc += er32(XONRXC);
+	adapter->stats.xontxc += er32(XONTXC);
+	adapter->stats.xoffrxc += er32(XOFFRXC);
+	adapter->stats.xofftxc += er32(XOFFTXC);
+	adapter->stats.fcruc += er32(FCRUC);
+	adapter->stats.gptc += er32(GPTC);
+	adapter->stats.gotcl += er32(GOTCL);
+	adapter->stats.gotch += er32(GOTCH);
+	adapter->stats.rnbc += er32(RNBC);
+	adapter->stats.ruc += er32(RUC);
+	adapter->stats.rfc += er32(RFC);
+	adapter->stats.rjc += er32(RJC);
+	adapter->stats.torl += er32(TORL);
+	adapter->stats.torh += er32(TORH);
+	adapter->stats.totl += er32(TOTL);
+	adapter->stats.toth += er32(TOTH);
+	adapter->stats.tpr += er32(TPR);
+
+	if (hw->mac_type != e1000_ich8lan) {
+		adapter->stats.ptc64 += er32(PTC64);
+		adapter->stats.ptc127 += er32(PTC127);
+		adapter->stats.ptc255 += er32(PTC255);
+		adapter->stats.ptc511 += er32(PTC511);
+		adapter->stats.ptc1023 += er32(PTC1023);
+		adapter->stats.ptc1522 += er32(PTC1522);
+	}
+
+	adapter->stats.mptc += er32(MPTC);
+	adapter->stats.bptc += er32(BPTC);
 
 	/* used for adaptive IFS */
 
-	hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
+	hw->tx_packet_delta = er32(TPT);
 	adapter->stats.tpt += hw->tx_packet_delta;
-	hw->collision_delta = E1000_READ_REG(hw, COLC);
+	hw->collision_delta = er32(COLC);
 	adapter->stats.colc += hw->collision_delta;
 
 	if (hw->mac_type >= e1000_82543) {
-		adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
-		adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
-		adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
-		adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
-		adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
-		adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
+		adapter->stats.algnerrc += er32(ALGNERRC);
+		adapter->stats.rxerrc += er32(RXERRC);
+		adapter->stats.tncrs += er32(TNCRS);
+		adapter->stats.cexterr += er32(CEXTERR);
+		adapter->stats.tsctc += er32(TSCTC);
+		adapter->stats.tsctfc += er32(TSCTFC);
 	}
 	if (hw->mac_type > e1000_82547_rev_2) {
-		adapter->stats.iac += E1000_READ_REG(hw, IAC);
-		adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
-
-		if (adapter->hw.mac_type != e1000_ich8lan) {
-			adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
-			adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
-			adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
-			adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
-			adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
-			adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
-			adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+		adapter->stats.iac += er32(IAC);
+		adapter->stats.icrxoc += er32(ICRXOC);
+
+		if (hw->mac_type != e1000_ich8lan) {
+			adapter->stats.icrxptc += er32(ICRXPTC);
+			adapter->stats.icrxatc += er32(ICRXATC);
+			adapter->stats.ictxptc += er32(ICTXPTC);
+			adapter->stats.ictxatc += er32(ICTXATC);
+			adapter->stats.ictxqec += er32(ICTXQEC);
+			adapter->stats.ictxqmtc += er32(ICTXQMTC);
+			adapter->stats.icrxdmtc += er32(ICRXDMTC);
 		}
 	}
 
@@ -3706,7 +3726,7 @@ void e1000_update_stats(struct e1000_adapter *adapter)
 	adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
 	adapter->net_stats.tx_window_errors = adapter->stats.latecol;
 	adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
-	if (adapter->hw.bad_tx_carr_stats_fd &&
+	if (hw->bad_tx_carr_stats_fd &&
 	    adapter->link_duplex == FULL_DUPLEX) {
 		adapter->net_stats.tx_carrier_errors = 0;
 		adapter->stats.tncrs = 0;
@@ -3729,10 +3749,10 @@ void e1000_update_stats(struct e1000_adapter *adapter)
 	}
 
 	/* Management Stats */
-	if (adapter->hw.has_smbus) {
-		adapter->stats.mgptc += E1000_READ_REG(hw, MGTPTC);
-		adapter->stats.mgprc += E1000_READ_REG(hw, MGTPRC);
-		adapter->stats.mgpdc += E1000_READ_REG(hw, MGTPDC);
+	if (hw->has_smbus) {
+		adapter->stats.mgptc += er32(MGTPTC);
+		adapter->stats.mgprc += er32(MGTPRC);
+		adapter->stats.mgpdc += er32(MGTPDC);
 	}
 
 	spin_unlock_irqrestore(&adapter->stats_lock, flags);
@@ -3752,7 +3772,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
 #ifndef CONFIG_E1000_NAPI
 	int i;
 #endif
-	u32 icr = E1000_READ_REG(hw, ICR);
+	u32 icr = er32(ICR);
 
 	/* in NAPI mode read ICR disables interrupts using IAM */
 
@@ -3762,10 +3782,10 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
 		 * link down event; disable receives here in the ISR and reset
 		 * adapter in watchdog */
 		if (netif_carrier_ok(netdev) &&
-		    (adapter->hw.mac_type == e1000_80003es2lan)) {
+		    (hw->mac_type == e1000_80003es2lan)) {
 			/* disable receives */
-			u32 rctl = E1000_READ_REG(hw, RCTL);
-			E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+			u32 rctl = er32(RCTL);
+			ew32(RCTL, rctl & ~E1000_RCTL_EN);
 		}
 		/* guard against interrupt when we're going down */
 		if (!test_bit(__E1000_DOWN, &adapter->flags))
@@ -3810,7 +3830,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	u32 rctl, icr = E1000_READ_REG(hw, ICR);
+	u32 rctl, icr = er32(ICR);
 #ifndef CONFIG_E1000_NAPI
 	int i;
 #endif
@@ -3836,10 +3856,10 @@ static irqreturn_t e1000_intr(int irq, void *data)
 		 * reset adapter in watchdog
 		 */
 		if (netif_carrier_ok(netdev) &&
-		    (adapter->hw.mac_type == e1000_80003es2lan)) {
+		    (hw->mac_type == e1000_80003es2lan)) {
 			/* disable receives */
-			rctl = E1000_READ_REG(hw, RCTL);
-			E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+			rctl = er32(RCTL);
+			ew32(RCTL, rctl & ~E1000_RCTL_EN);
 		}
 		/* guard against interrupt when we're going down */
 		if (!test_bit(__E1000_DOWN, &adapter->flags))
@@ -3849,8 +3869,8 @@ static irqreturn_t e1000_intr(int irq, void *data)
 #ifdef CONFIG_E1000_NAPI
 	if (unlikely(hw->mac_type < e1000_82571)) {
 		/* disable interrupts, without the synchronize_irq bit */
-		E1000_WRITE_REG(hw, IMC, ~0);
-		E1000_WRITE_FLUSH(hw);
+		ew32(IMC, ~0);
+		E1000_WRITE_FLUSH();
 	}
 	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
 		adapter->total_tx_bytes = 0;
@@ -3874,7 +3894,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	 * de-assertion state.
 	 */
 	if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
-		E1000_WRITE_REG(hw, IMC, ~0);
+		ew32(IMC, ~0);
 
 	adapter->total_tx_bytes = 0;
 	adapter->total_rx_bytes = 0;
@@ -3947,6 +3967,7 @@ static int e1000_clean(struct napi_struct *napi, int budget)
 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 			       struct e1000_tx_ring *tx_ring)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_tx_desc *tx_desc, *eop_desc;
 	struct e1000_buffer *buffer_info;
@@ -4014,8 +4035,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 		if (tx_ring->buffer_info[eop].dma &&
 		    time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
 		               (adapter->tx_timeout_factor * HZ))
-		    && !(E1000_READ_REG(&adapter->hw, STATUS) &
-		         E1000_STATUS_TXOFF)) {
+		    && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
 
 			/* detected Tx unit hang */
 			DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
@@ -4031,8 +4051,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 					"  next_to_watch.status <%x>\n",
 				(unsigned long)((tx_ring - adapter->tx_ring) /
 					sizeof(struct e1000_tx_ring)),
-				readl(adapter->hw.hw_addr + tx_ring->tdh),
-				readl(adapter->hw.hw_addr + tx_ring->tdt),
+				readl(hw->hw_addr + tx_ring->tdh),
+				readl(hw->hw_addr + tx_ring->tdt),
 				tx_ring->next_to_use,
 				tx_ring->next_to_clean,
 				tx_ring->buffer_info[eop].time_stamp,
@@ -4060,12 +4080,13 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 			      u32 csum, struct sk_buff *skb)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u16 status = (u16)status_err;
 	u8 errors = (u8)(status_err >> 24);
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* 82543 or newer only */
-	if (unlikely(adapter->hw.mac_type < e1000_82543)) return;
+	if (unlikely(hw->mac_type < e1000_82543)) return;
 	/* Ignore Checksum bit is set */
 	if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
 	/* TCP/UDP checksum error bit is set */
@@ -4075,7 +4096,7 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 		return;
 	}
 	/* TCP/UDP Checksum has not been calculated */
-	if (adapter->hw.mac_type <= e1000_82547_rev_2) {
+	if (hw->mac_type <= e1000_82547_rev_2) {
 		if (!(status & E1000_RXD_STAT_TCPCS))
 			return;
 	} else {
@@ -4086,7 +4107,7 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 	if (likely(status & E1000_RXD_STAT_TCPCS)) {
 		/* TCP checksum is good */
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
-	} else if (adapter->hw.mac_type > e1000_82547_rev_2) {
+	} else if (hw->mac_type > e1000_82547_rev_2) {
 		/* IP fragment with UDP payload */
 		/* Hardware complements the payload checksum, so we undo it
 		 * and then put the value in host order for further stack use.
@@ -4111,6 +4132,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			       struct e1000_rx_ring *rx_ring)
 #endif
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_rx_desc *rx_desc, *next_rxd;
@@ -4168,11 +4190,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 
 		if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
 			last_byte = *(skb->data + length - 1);
-			if (TBI_ACCEPT(&adapter->hw, status,
-			              rx_desc->errors, length, last_byte)) {
+			if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+				       last_byte)) {
 				spin_lock_irqsave(&adapter->stats_lock, flags);
-				e1000_tbi_adjust_stats(&adapter->hw,
-				                       &adapter->stats,
+				e1000_tbi_adjust_stats(hw, &adapter->stats,
 				                       length, skb->data);
 				spin_unlock_irqrestore(&adapter->stats_lock,
 				                       flags);
@@ -4462,6 +4483,7 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 				   struct e1000_rx_ring *rx_ring,
 				   int cleaned_count)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_rx_desc *rx_desc;
@@ -4559,7 +4581,7 @@ map_skb:
 		 * applicable for weak-ordered memory model archs,
 		 * such as IA-64). */
 		wmb();
-		writel(i, adapter->hw.hw_addr + rx_ring->rdt);
+		writel(i, hw->hw_addr + rx_ring->rdt);
 	}
 }
 
@@ -4572,6 +4594,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 				      struct e1000_rx_ring *rx_ring,
 				      int cleaned_count)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 	union e1000_rx_desc_packet_split *rx_desc;
@@ -4656,7 +4679,7 @@ no_buffers:
 		 * descriptors are 32 bytes...so we increment tail
 		 * twice as much.
 		 */
-		writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
+		writel(i<<1, hw->hw_addr + rx_ring->rdt);
 	}
 }
 
@@ -4667,46 +4690,47 @@ no_buffers:
 
 static void e1000_smartspeed(struct e1000_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	u16 phy_status;
 	u16 phy_ctrl;
 
-	if ((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
-	   !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL))
+	if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
+	   !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
 		return;
 
 	if (adapter->smartspeed == 0) {
 		/* If Master/Slave config fault is asserted twice,
 		 * we assume back-to-back */
-		e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
+		e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
 		if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
-		e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
+		e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
 		if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
-		e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
+		e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
 		if (phy_ctrl & CR_1000T_MS_ENABLE) {
 			phy_ctrl &= ~CR_1000T_MS_ENABLE;
-			e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
+			e1000_write_phy_reg(hw, PHY_1000T_CTRL,
 					    phy_ctrl);
 			adapter->smartspeed++;
-			if (!e1000_phy_setup_autoneg(&adapter->hw) &&
-			   !e1000_read_phy_reg(&adapter->hw, PHY_CTRL,
+			if (!e1000_phy_setup_autoneg(hw) &&
+			   !e1000_read_phy_reg(hw, PHY_CTRL,
 				   	       &phy_ctrl)) {
 				phy_ctrl |= (MII_CR_AUTO_NEG_EN |
 					     MII_CR_RESTART_AUTO_NEG);
-				e1000_write_phy_reg(&adapter->hw, PHY_CTRL,
+				e1000_write_phy_reg(hw, PHY_CTRL,
 						    phy_ctrl);
 			}
 		}
 		return;
 	} else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
 		/* If still no link, perhaps using 2/3 pair cable */
-		e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
+		e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
 		phy_ctrl |= CR_1000T_MS_ENABLE;
-		e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
-		if (!e1000_phy_setup_autoneg(&adapter->hw) &&
-		   !e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
+		e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
+		if (!e1000_phy_setup_autoneg(hw) &&
+		   !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
 			phy_ctrl |= (MII_CR_AUTO_NEG_EN |
 				     MII_CR_RESTART_AUTO_NEG);
-			e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
+			e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
 		}
 	}
 	/* Restart process after E1000_SMARTSPEED_MAX iterations */
@@ -4744,24 +4768,25 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 			   int cmd)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	struct mii_ioctl_data *data = if_mii(ifr);
 	int retval;
 	u16 mii_reg;
 	u16 spddplx;
 	unsigned long flags;
 
-	if (adapter->hw.media_type != e1000_media_type_copper)
+	if (hw->media_type != e1000_media_type_copper)
 		return -EOPNOTSUPP;
 
 	switch (cmd) {
 	case SIOCGMIIPHY:
-		data->phy_id = adapter->hw.phy_addr;
+		data->phy_id = hw->phy_addr;
 		break;
 	case SIOCGMIIREG:
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 		spin_lock_irqsave(&adapter->stats_lock, flags);
-		if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+		if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
 				   &data->val_out)) {
 			spin_unlock_irqrestore(&adapter->stats_lock, flags);
 			return -EIO;
@@ -4775,20 +4800,20 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 			return -EFAULT;
 		mii_reg = data->val_in;
 		spin_lock_irqsave(&adapter->stats_lock, flags);
-		if (e1000_write_phy_reg(&adapter->hw, data->reg_num,
+		if (e1000_write_phy_reg(hw, data->reg_num,
 					mii_reg)) {
 			spin_unlock_irqrestore(&adapter->stats_lock, flags);
 			return -EIO;
 		}
 		spin_unlock_irqrestore(&adapter->stats_lock, flags);
-		if (adapter->hw.media_type == e1000_media_type_copper) {
+		if (hw->media_type == e1000_media_type_copper) {
 			switch (data->reg_num) {
 			case PHY_CTRL:
 				if (mii_reg & MII_CR_POWER_DOWN)
 					break;
 				if (mii_reg & MII_CR_AUTO_NEG_EN) {
-					adapter->hw.autoneg = 1;
-					adapter->hw.autoneg_advertised = 0x2F;
+					hw->autoneg = 1;
+					hw->autoneg_advertised = 0x2F;
 				} else {
 					if (mii_reg & 0x40)
 						spddplx = SPEED_1000;
@@ -4811,7 +4836,7 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 				break;
 			case M88E1000_PHY_SPEC_CTRL:
 			case M88E1000_EXT_PHY_SPEC_CTRL:
-				if (e1000_phy_reset(&adapter->hw))
+				if (e1000_phy_reset(hw))
 					return -EIO;
 				break;
 			}
@@ -4885,6 +4910,7 @@ static void e1000_vlan_rx_register(struct net_device *netdev,
 				   struct vlan_group *grp)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl, rctl;
 
 	if (!test_bit(__E1000_DOWN, &adapter->flags))
@@ -4893,22 +4919,22 @@ static void e1000_vlan_rx_register(struct net_device *netdev,
 
 	if (grp) {
 		/* enable VLAN tag insert/strip */
-		ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+		ctrl = er32(CTRL);
 		ctrl |= E1000_CTRL_VME;
-		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+		ew32(CTRL, ctrl);
 
 		if (adapter->hw.mac_type != e1000_ich8lan) {
 			/* enable VLAN receive filtering */
-			rctl = E1000_READ_REG(&adapter->hw, RCTL);
+			rctl = er32(RCTL);
 			rctl &= ~E1000_RCTL_CFIEN;
-			E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+			ew32(RCTL, rctl);
 			e1000_update_mng_vlan(adapter);
 		}
 	} else {
 		/* disable VLAN tag insert/strip */
-		ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+		ctrl = er32(CTRL);
 		ctrl &= ~E1000_CTRL_VME;
-		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+		ew32(CTRL, ctrl);
 
 		if (adapter->hw.mac_type != e1000_ich8lan) {
 			if (adapter->mng_vlan_id !=
@@ -4927,22 +4953,24 @@ static void e1000_vlan_rx_register(struct net_device *netdev,
 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	u32 vfta, index;
 
-	if ((adapter->hw.mng_cookie.status &
+	if ((hw->mng_cookie.status &
 	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
 	    (vid == adapter->mng_vlan_id))
 		return;
 	/* add VID to filter table */
 	index = (vid >> 5) & 0x7F;
-	vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+	vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
 	vfta |= (1 << (vid & 0x1F));
-	e1000_write_vfta(&adapter->hw, index, vfta);
+	e1000_write_vfta(hw, index, vfta);
 }
 
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	u32 vfta, index;
 
 	if (!test_bit(__E1000_DOWN, &adapter->flags))
@@ -4951,7 +4979,7 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 	if (!test_bit(__E1000_DOWN, &adapter->flags))
 		e1000_irq_enable(adapter);
 
-	if ((adapter->hw.mng_cookie.status &
+	if ((hw->mng_cookie.status &
 	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
 	    (vid == adapter->mng_vlan_id)) {
 		/* release control to f/w */
@@ -4961,9 +4989,9 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 
 	/* remove VID from filter table */
 	index = (vid >> 5) & 0x7F;
-	vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+	vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
 	vfta &= ~(1 << (vid & 0x1F));
-	e1000_write_vfta(&adapter->hw, index, vfta);
+	e1000_write_vfta(hw, index, vfta);
 }
 
 static void e1000_restore_vlan(struct e1000_adapter *adapter)
@@ -4982,10 +5010,12 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter)
 
 int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 {
-	adapter->hw.autoneg = 0;
+	struct e1000_hw *hw = &adapter->hw;
+
+	hw->autoneg = 0;
 
 	/* Fiber NICs only allow 1000 gbps Full duplex */
-	if ((adapter->hw.media_type == e1000_media_type_fiber) &&
+	if ((hw->media_type == e1000_media_type_fiber) &&
 		spddplx != (SPEED_1000 + DUPLEX_FULL)) {
 		DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
@@ -4993,20 +5023,20 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 
 	switch (spddplx) {
 	case SPEED_10 + DUPLEX_HALF:
-		adapter->hw.forced_speed_duplex = e1000_10_half;
+		hw->forced_speed_duplex = e1000_10_half;
 		break;
 	case SPEED_10 + DUPLEX_FULL:
-		adapter->hw.forced_speed_duplex = e1000_10_full;
+		hw->forced_speed_duplex = e1000_10_full;
 		break;
 	case SPEED_100 + DUPLEX_HALF:
-		adapter->hw.forced_speed_duplex = e1000_100_half;
+		hw->forced_speed_duplex = e1000_100_half;
 		break;
 	case SPEED_100 + DUPLEX_FULL:
-		adapter->hw.forced_speed_duplex = e1000_100_full;
+		hw->forced_speed_duplex = e1000_100_full;
 		break;
 	case SPEED_1000 + DUPLEX_FULL:
-		adapter->hw.autoneg = 1;
-		adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
+		hw->autoneg = 1;
+		hw->autoneg_advertised = ADVERTISE_1000_FULL;
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 	default:
@@ -5020,6 +5050,7 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl, ctrl_ext, rctl, status;
 	u32 wufc = adapter->wol;
 #ifdef CONFIG_PM
@@ -5039,7 +5070,7 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 		return retval;
 #endif
 
-	status = E1000_READ_REG(&adapter->hw, STATUS);
+	status = er32(STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
 
@@ -5049,40 +5080,40 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 
 		/* turn on all-multi mode if wake on multicast is enabled */
 		if (wufc & E1000_WUFC_MC) {
-			rctl = E1000_READ_REG(&adapter->hw, RCTL);
+			rctl = er32(RCTL);
 			rctl |= E1000_RCTL_MPE;
-			E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+			ew32(RCTL, rctl);
 		}
 
-		if (adapter->hw.mac_type >= e1000_82540) {
-			ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+		if (hw->mac_type >= e1000_82540) {
+			ctrl = er32(CTRL);
 			/* advertise wake from D3Cold */
 			#define E1000_CTRL_ADVD3WUC 0x00100000
 			/* phy power management enable */
 			#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
 			ctrl |= E1000_CTRL_ADVD3WUC |
 				E1000_CTRL_EN_PHY_PWR_MGMT;
-			E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
+			ew32(CTRL, ctrl);
 		}
 
-		if (adapter->hw.media_type == e1000_media_type_fiber ||
-		   adapter->hw.media_type == e1000_media_type_internal_serdes) {
+		if (hw->media_type == e1000_media_type_fiber ||
+		   hw->media_type == e1000_media_type_internal_serdes) {
 			/* keep the laser running in D3 */
-			ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+			ctrl_ext = er32(CTRL_EXT);
 			ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
-			E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
+			ew32(CTRL_EXT, ctrl_ext);
 		}
 
 		/* Allow time for pending master requests to run */
-		e1000_disable_pciex_master(&adapter->hw);
+		e1000_disable_pciex_master(hw);
 
-		E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
-		E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
+		ew32(WUC, E1000_WUC_PME_EN);
+		ew32(WUFC, wufc);
 		pci_enable_wake(pdev, PCI_D3hot, 1);
 		pci_enable_wake(pdev, PCI_D3cold, 1);
 	} else {
-		E1000_WRITE_REG(&adapter->hw, WUC, 0);
-		E1000_WRITE_REG(&adapter->hw, WUFC, 0);
+		ew32(WUC, 0);
+		ew32(WUFC, 0);
 		pci_enable_wake(pdev, PCI_D3hot, 0);
 		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
@@ -5095,8 +5126,8 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 		pci_enable_wake(pdev, PCI_D3cold, 1);
 	}
 
-	if (adapter->hw.phy_type == e1000_phy_igp_3)
-		e1000_phy_powerdown_workaround(&adapter->hw);
+	if (hw->phy_type == e1000_phy_igp_3)
+		e1000_phy_powerdown_workaround(hw);
 
 	if (netif_running(netdev))
 		e1000_free_irq(adapter);
@@ -5117,6 +5148,7 @@ static int e1000_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
 	u32 err;
 
 	pci_set_power_state(pdev, PCI_D0);
@@ -5135,7 +5167,7 @@ static int e1000_resume(struct pci_dev *pdev)
 
 	e1000_power_up_phy(adapter);
 	e1000_reset(adapter);
-	E1000_WRITE_REG(&adapter->hw, WUS, ~0);
+	ew32(WUS, ~0);
 
 	e1000_init_manageability(adapter);
 
@@ -5148,8 +5180,8 @@ static int e1000_resume(struct pci_dev *pdev)
 	 * DRV_LOAD until the interface is up.  For all other cases,
 	 * let the f/w know that the h/w is now under the control
 	 * of the driver. */
-	if (adapter->hw.mac_type != e1000_82573 ||
-	    !e1000_check_mng_mode(&adapter->hw))
+	if (hw->mac_type != e1000_82573 ||
+	    !e1000_check_mng_mode(hw))
 		e1000_get_hw_control(adapter);
 
 	return 0;
@@ -5215,6 +5247,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_hw *hw = &adapter->hw;
 
 	if (pci_enable_device(pdev)) {
 		printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
@@ -5226,7 +5259,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 	pci_enable_wake(pdev, PCI_D3cold, 0);
 
 	e1000_reset(adapter);
-	E1000_WRITE_REG(&adapter->hw, WUS, ~0);
+	ew32(WUS, ~0);
 
 	return PCI_ERS_RESULT_RECOVERED;
 }
@@ -5243,6 +5276,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev->priv;
+	struct e1000_hw *hw = &adapter->hw;
 
 	e1000_init_manageability(adapter);
 
@@ -5259,8 +5293,8 @@ static void e1000_io_resume(struct pci_dev *pdev)
 	 * DRV_LOAD until the interface is up.  For all other cases,
 	 * let the f/w know that the h/w is now under the control
 	 * of the driver. */
-	if (adapter->hw.mac_type != e1000_82573 ||
-	    !e1000_check_mng_mode(&adapter->hw))
+	if (hw->mac_type != e1000_82573 ||
+	    !e1000_check_mng_mode(hw))
 		e1000_get_hw_control(adapter);
 
 }
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index 365626d3177..acb5134ab22 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -55,13 +55,13 @@
 #define DEBUGOUT7 DEBUGOUT3
 
 
-#define E1000_WRITE_REG(a, reg, value) ( \
-    writel((value), ((a)->hw_addr + \
-        (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg))))
+#define er32(reg)\
+	(readl(hw->hw_addr + ((hw->mac_type >= e1000_82543)		\
+			       ? E1000_##reg : E1000_82542_##reg)))
 
-#define E1000_READ_REG(a, reg) ( \
-    readl((a)->hw_addr + \
-        (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg)))
+#define ew32(reg, value)						\
+	(writel((value), (hw->hw_addr + ((hw->mac_type >= e1000_82543)	\
+					 ? E1000_##reg : E1000_82542_##reg))))
 
 #define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
     writel((value), ((a)->hw_addr + \
@@ -96,7 +96,7 @@
         (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
         (offset)))
 
-#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS)
+#define E1000_WRITE_FLUSH() er32(STATUS)
 
 #define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \
     writel((value), ((a)->flash_address + reg)))
-- 
cgit v1.2.3


From c03e83b0351f8a9464d32f31302ec75ba88518dc Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 11 Jul 2008 15:17:13 -0700
Subject: e1000: Move extern function definitions to e1000.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000/e1000.h         | 11 ++++++++++-
 drivers/net/e1000/e1000_ethtool.c | 13 -------------
 2 files changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 31feae1ea39..20188af0ccd 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -353,9 +353,18 @@ enum e1000_state_t {
 extern char e1000_driver_name[];
 extern const char e1000_driver_version[];
 
+extern int e1000_up(struct e1000_adapter *adapter);
+extern void e1000_down(struct e1000_adapter *adapter);
+extern void e1000_reinit_locked(struct e1000_adapter *adapter);
+extern void e1000_reset(struct e1000_adapter *adapter);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
+extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_update_stats(struct e1000_adapter *adapter);
 extern void e1000_power_up_phy(struct e1000_adapter *);
 extern void e1000_set_ethtool_ops(struct net_device *netdev);
 extern void e1000_check_options(struct e1000_adapter *adapter);
 
-
 #endif /* _E1000_H_ */
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 966d52a529e..e262605c470 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -29,21 +29,8 @@
 /* ethtool support for e1000 */
 
 #include "e1000.h"
-
 #include <asm/uaccess.h>
 
-extern int e1000_up(struct e1000_adapter *adapter);
-extern void e1000_down(struct e1000_adapter *adapter);
-extern void e1000_reinit_locked(struct e1000_adapter *adapter);
-extern void e1000_reset(struct e1000_adapter *adapter);
-extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx);
-extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
-extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
-extern void e1000_update_stats(struct e1000_adapter *adapter);
-
-
 struct e1000_stats {
 	char stat_string[ETH_GSTRING_LEN];
 	int sizeof_stat;
-- 
cgit v1.2.3


From e982f17c87488a98df6bc4f5454a176646b4d00b Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 11 Jul 2008 15:17:18 -0700
Subject: e1000: Remove spaces after casts and function names

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000/e1000.h         | 16 ++++++------
 drivers/net/e1000/e1000_ethtool.c | 16 ++++++------
 drivers/net/e1000/e1000_hw.c      | 53 +++++++++++++++++++--------------------
 drivers/net/e1000/e1000_main.c    | 14 +++++------
 drivers/net/e1000/e1000_osdep.h   |  2 +-
 5 files changed, 50 insertions(+), 51 deletions(-)

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 20188af0ccd..a1f4a764bfb 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -287,16 +287,16 @@ struct e1000_adapter {
 
 	/* RX */
 #ifdef CONFIG_E1000_NAPI
-	bool (*clean_rx) (struct e1000_adapter *adapter,
-			  struct e1000_rx_ring *rx_ring,
-			  int *work_done, int work_to_do);
+	bool (*clean_rx)(struct e1000_adapter *adapter,
+			 struct e1000_rx_ring *rx_ring,
+			 int *work_done, int work_to_do);
 #else
-	bool (*clean_rx) (struct e1000_adapter *adapter,
-			  struct e1000_rx_ring *rx_ring);
+	bool (*clean_rx)(struct e1000_adapter *adapter,
+			 struct e1000_rx_ring *rx_ring);
 #endif
-	void (*alloc_rx_buf) (struct e1000_adapter *adapter,
-			      struct e1000_rx_ring *rx_ring,
-				int cleaned_count);
+	void (*alloc_rx_buf)(struct e1000_adapter *adapter,
+			     struct e1000_rx_ring *rx_ring,
+			     int cleaned_count);
 	struct e1000_rx_ring *rx_ring;      /* One per active queue */
 #ifdef CONFIG_E1000_NAPI
 	struct napi_struct napi;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index e262605c470..f9ac9a87ffa 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -881,7 +881,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
 	}
 
 	/* If Checksum is not Correct return error else test passed */
-	if ((checksum != (u16) EEPROM_SUM) && !(*data))
+	if ((checksum != (u16)EEPROM_SUM) && !(*data))
 		*data = 2;
 
 	return *data;
@@ -889,7 +889,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
 
 static irqreturn_t e1000_test_intr(int irq, void *data)
 {
-	struct net_device *netdev = (struct net_device *) data;
+	struct net_device *netdev = (struct net_device *)data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
@@ -1074,8 +1074,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 	memset(txdr->desc, 0, txdr->size);
 	txdr->next_to_use = txdr->next_to_clean = 0;
 
-	ew32(TDBAL, ((u64) txdr->dma & 0x00000000FFFFFFFF));
-	ew32(TDBAH, ((u64) txdr->dma >> 32));
+	ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF));
+	ew32(TDBAH, ((u64)txdr->dma >> 32));
 	ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc));
 	ew32(TDH, 0);
 	ew32(TDT, 0);
@@ -1128,8 +1128,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 
 	rctl = er32(RCTL);
 	ew32(RCTL, rctl & ~E1000_RCTL_EN);
-	ew32(RDBAL, ((u64) rxdr->dma & 0xFFFFFFFF));
-	ew32(RDBAH, ((u64) rxdr->dma >> 32));
+	ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF));
+	ew32(RDBAH, ((u64)rxdr->dma >> 32));
 	ew32(RDLEN, rxdr->size);
 	ew32(RDH, 0);
 	ew32(RDT, 0);
@@ -1863,7 +1863,7 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 		if (!adapter->blink_timer.function) {
 			init_timer(&adapter->blink_timer);
 			adapter->blink_timer.function = e1000_led_blink_callback;
-			adapter->blink_timer.data = (unsigned long) adapter;
+			adapter->blink_timer.data = (unsigned long)adapter;
 		}
 		e1000_setup_led(hw);
 		mod_timer(&adapter->blink_timer, jiffies);
@@ -1873,7 +1873,7 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 		if (!adapter->blink_timer.function) {
 			init_timer(&adapter->blink_timer);
 			adapter->blink_timer.function = e1000_led_blink_callback;
-			adapter->blink_timer.data = (unsigned long) adapter;
+			adapter->blink_timer.data = (unsigned long)adapter;
 		}
 		mod_timer(&adapter->blink_timer, jiffies);
 		msleep_interruptible(data * 1000);
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 5d3c2bd7b61..9d6edf3e73f 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -3533,7 +3533,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
             DEBUGOUT("MDI Error\n");
             return -E1000_ERR_PHY;
         }
-        *phy_data = (u16) mdic;
+        *phy_data = (u16)mdic;
     } else {
         /* We must first send a preamble through the MDIO pin to signal the
          * beginning of an MII instruction.  This is done by sending 32
@@ -3648,7 +3648,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
          * for the PHY register in the MDI Control register.  The MAC will take
          * care of interfacing with the PHY to send the desired data.
          */
-        mdic = (((u32) phy_data) |
+        mdic = (((u32)phy_data) |
                 (reg_addr << E1000_MDIC_REG_SHIFT) |
                 (phy_addr << E1000_MDIC_PHY_SHIFT) |
                 (E1000_MDIC_OP_WRITE));
@@ -3682,7 +3682,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
         mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
                 (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
         mdic <<= 16;
-        mdic |= (u32) phy_data;
+        mdic |= (u32)phy_data;
 
         e1000_shift_out_mdi_bits(hw, mdic, 32);
     }
@@ -4032,14 +4032,14 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
     if (ret_val)
         return ret_val;
 
-    hw->phy_id = (u32) (phy_id_high << 16);
+    hw->phy_id = (u32)(phy_id_high << 16);
     udelay(20);
     ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
     if (ret_val)
         return ret_val;
 
-    hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
-    hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
+    hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK);
+    hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK;
 
     switch (hw->mac_type) {
     case e1000_82543:
@@ -5174,7 +5174,7 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
         checksum += eeprom_data;
     }
 
-    if (checksum == (u16) EEPROM_SUM)
+    if (checksum == (u16)EEPROM_SUM)
         return E1000_SUCCESS;
     else {
         DEBUGOUT("EEPROM Checksum Invalid\n");
@@ -5205,7 +5205,7 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
         }
         checksum += eeprom_data;
     }
-    checksum = (u16) EEPROM_SUM - checksum;
+    checksum = (u16)EEPROM_SUM - checksum;
     if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
         DEBUGOUT("EEPROM Write Error\n");
         return -E1000_ERR_EEPROM;
@@ -5610,8 +5610,8 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw)
             DEBUGOUT("EEPROM Read Error\n");
             return -E1000_ERR_EEPROM;
         }
-        hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
-        hw->perm_mac_addr[i+1] = (u8) (eeprom_data >> 8);
+        hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF);
+        hw->perm_mac_addr[i+1] = (u8)(eeprom_data >> 8);
     }
 
     switch (hw->mac_type) {
@@ -5693,37 +5693,37 @@ u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
     case 0:
         if (hw->mac_type == e1000_ich8lan) {
             /* [47:38] i.e. 0x158 for above example address */
-            hash_value = ((mc_addr[4] >> 6) | (((u16) mc_addr[5]) << 2));
+            hash_value = ((mc_addr[4] >> 6) | (((u16)mc_addr[5]) << 2));
         } else {
             /* [47:36] i.e. 0x563 for above example address */
-            hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+            hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
         }
         break;
     case 1:
         if (hw->mac_type == e1000_ich8lan) {
             /* [46:37] i.e. 0x2B1 for above example address */
-            hash_value = ((mc_addr[4] >> 5) | (((u16) mc_addr[5]) << 3));
+            hash_value = ((mc_addr[4] >> 5) | (((u16)mc_addr[5]) << 3));
         } else {
             /* [46:35] i.e. 0xAC6 for above example address */
-            hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+            hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
         }
         break;
     case 2:
         if (hw->mac_type == e1000_ich8lan) {
             /*[45:36] i.e. 0x163 for above example address */
-            hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+            hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
         } else {
             /* [45:34] i.e. 0x5D8 for above example address */
-            hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+            hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
         }
         break;
     case 3:
         if (hw->mac_type == e1000_ich8lan) {
             /* [43:34] i.e. 0x18D for above example address */
-            hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+            hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
         } else {
             /* [43:32] i.e. 0x634 for above example address */
-            hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+            hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
         }
         break;
     }
@@ -5795,10 +5795,9 @@ void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
     /* HW expects these in little endian so we reverse the byte order
      * from network order (big endian) to little endian
      */
-    rar_low = ((u32) addr[0] |
-               ((u32) addr[1] << 8) |
-               ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
-    rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+    rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
+               ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
+    rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
 
     /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
      * unit hang.
@@ -6412,7 +6411,7 @@ void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
      * since the test for a multicast frame will test positive on
      * a broadcast frame.
      */
-    if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff))
+    if ((mac_addr[0] == (u8)0xff) && (mac_addr[1] == (u8)0xff))
         /* Broadcast packet */
         stats->bprc++;
     else if (*mac_addr & 0x01)
@@ -7382,7 +7381,7 @@ static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer)
     offset = (offset >> 2);
 
     for (i = 0; i < length; i++) {
-        *((u32 *) buffer + i) =
+        *((u32 *)buffer + i) =
             E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i);
     }
     return E1000_SUCCESS;
@@ -7513,7 +7512,7 @@ static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
     sum = hdr->checksum;
     hdr->checksum = 0;
 
-    buffer = (u8 *) hdr;
+    buffer = (u8 *)hdr;
     i = length;
     while (i--)
         sum += buffer[i];
@@ -7523,7 +7522,7 @@ static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
     length >>= 2;
     /* The device driver writes the relevant command block into the ram area. */
     for (i = 0; i < length; i++) {
-        E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *) hdr + i));
+        E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *)hdr + i));
         E1000_WRITE_FLUSH();
     }
 
@@ -7616,7 +7615,7 @@ static u8 e1000_calculate_mng_checksum(char *buffer, u32 length)
     for (i=0; i < length; i++)
         sum += buffer[i];
 
-    return (u8) (0 - sum);
+    return (u8)(0 - sum);
 }
 
 /*****************************************************************************
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ad1f052c3d3..cb44fded47e 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1056,7 +1056,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	init_timer(&adapter->tx_fifo_stall_timer);
 	adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
-	adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
+	adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
 
 	init_timer(&adapter->watchdog_timer);
 	adapter->watchdog_timer.function = &e1000_watchdog;
@@ -1064,7 +1064,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	init_timer(&adapter->phy_info_timer);
 	adapter->phy_info_timer.function = &e1000_update_phy_info;
-	adapter->phy_info_timer.data = (unsigned long) adapter;
+	adapter->phy_info_timer.data = (unsigned long)adapter;
 
 	INIT_WORK(&adapter->reset_task, e1000_reset_task);
 
@@ -1542,7 +1542,7 @@ static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
 				  unsigned long len)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	unsigned long begin = (unsigned long) start;
+	unsigned long begin = (unsigned long)start;
 	unsigned long end = begin + len;
 
 	/* First rev 82545 and 82546 need to not allow any memory
@@ -2538,7 +2538,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
 
 static void e1000_update_phy_info(unsigned long data)
 {
-	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+	struct e1000_adapter *adapter = (struct e1000_adapter *)data;
 	struct e1000_hw *hw = &adapter->hw;
 	e1000_phy_get_info(hw, &adapter->phy_info);
 }
@@ -2550,7 +2550,7 @@ static void e1000_update_phy_info(unsigned long data)
 
 static void e1000_82547_tx_fifo_stall(unsigned long data)
 {
-	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+	struct e1000_adapter *adapter = (struct e1000_adapter *)data;
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	u32 tctl;
@@ -2583,7 +2583,7 @@ static void e1000_82547_tx_fifo_stall(unsigned long data)
  **/
 static void e1000_watchdog(unsigned long data)
 {
-	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+	struct e1000_adapter *adapter = (struct e1000_adapter *)data;
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_tx_ring *txdr = adapter->tx_ring;
@@ -3225,7 +3225,7 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
 			return 0;
 	}
 	if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
-		struct ethhdr *eth = (struct ethhdr *) skb->data;
+		struct ethhdr *eth = (struct ethhdr *)skb->data;
 		if ((htons(ETH_P_IP) == eth->h_proto)) {
 			const struct iphdr *ip =
 				(struct iphdr *)((u8 *)skb->data+14);
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index acb5134ab22..d9298522f5a 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -55,7 +55,7 @@
 #define DEBUGOUT7 DEBUGOUT3
 
 
-#define er32(reg)\
+#define er32(reg)							\
 	(readl(hw->hw_addr + ((hw->mac_type >= e1000_82543)		\
 			       ? E1000_##reg : E1000_82542_##reg)))
 
-- 
cgit v1.2.3


From b11840204f36f9a1e3027033227e17d167e04377 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 11 Jul 2008 15:17:23 -0700
Subject: e1000: checkpatch clean

Redefine DPRINTK macro using do while(0)
__FUNCTION__ to __func__
structs {} on separate lines
Surround negative constants with ()

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000/e1000.h | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index a1f4a764bfb..3aeba9305df 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -90,10 +90,13 @@ struct e1000_adapter;
 #define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
 
 #define PFX "e1000: "
-#define DPRINTK(nlevel, klevel, fmt, args...) \
-	(void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
-	printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
-		__FUNCTION__ , ## args))
+
+#define DPRINTK(nlevel, klevel, fmt, args...)				\
+do {									\
+	if (NETIF_MSG_##nlevel & adapter->msg_enable)			\
+		printk(KERN_##klevel PFX "%s: %s: " fmt,		\
+		       adapter->netdev->name, __func__, ##args);	\
+} while (0)
 
 #define E1000_MAX_INTR 10
 
@@ -151,9 +154,9 @@ struct e1000_adapter;
 #define E1000_MASTER_SLAVE	e1000_ms_hw_default
 #endif
 
-#define E1000_MNG_VLAN_NONE -1
+#define E1000_MNG_VLAN_NONE (-1)
 /* Number of packet split data buffers (not including the header buffer) */
-#define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1
+#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
 
 /* wrapper around a pointer to a socket buffer,
  * so a DMA handle can be stored along with the buffer */
@@ -165,9 +168,13 @@ struct e1000_buffer {
 	u16 next_to_watch;
 };
 
+struct e1000_ps_page {
+	struct page *ps_page[PS_PAGE_BUFFERS];
+};
 
-struct e1000_ps_page { struct page *ps_page[PS_PAGE_BUFFERS]; };
-struct e1000_ps_page_dma { u64 ps_page_dma[PS_PAGE_BUFFERS]; };
+struct e1000_ps_page_dma {
+	u64 ps_page_dma[PS_PAGE_BUFFERS];
+};
 
 struct e1000_tx_ring {
 	/* pointer to the descriptor ring memory */
@@ -217,13 +224,13 @@ struct e1000_rx_ring {
 	u16 rdt;
 };
 
-#define E1000_DESC_UNUSED(R) \
-	((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
-	(R)->next_to_clean - (R)->next_to_use - 1)
+#define E1000_DESC_UNUSED(R)						\
+	((((R)->next_to_clean > (R)->next_to_use)			\
+	  ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
 
-#define E1000_RX_DESC_PS(R, i)	    \
+#define E1000_RX_DESC_PS(R, i)						\
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
-#define E1000_RX_DESC_EXT(R, i)	    \
+#define E1000_RX_DESC_EXT(R, i)						\
 	(&(((union e1000_rx_desc_extended *)((R).desc))[i]))
 #define E1000_GET_DESC(R, i, type)	(&(((struct type *)((R).desc))[i]))
 #define E1000_RX_DESC(R, i)		E1000_GET_DESC(R, i, e1000_rx_desc)
@@ -317,7 +324,6 @@ struct e1000_adapter {
 	u64 gorcl_old;
 	u16 rx_ps_bsize0;
 
-
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-- 
cgit v1.2.3


From c7be73bc9bfc8a650fe646f484dea5bad3cf92d5 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Fri, 11 Jul 2008 15:17:28 -0700
Subject: e1000: Move assignments in tests before test

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000/e1000_ethtool.c | 49 +++++++++++++++++++++++----------------
 drivers/net/e1000/e1000_main.c    | 41 +++++++++++++++++++++-----------
 2 files changed, 56 insertions(+), 34 deletions(-)

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index f9ac9a87ffa..6a3893acfe0 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -483,10 +483,12 @@ static int e1000_get_eeprom(struct net_device *netdev,
 					    last_word - first_word + 1,
 					    eeprom_buff);
 	else {
-		for (i = 0; i < last_word - first_word + 1; i++)
-			if ((ret_val = e1000_read_eeprom(hw, first_word + i, 1,
-							&eeprom_buff[i])))
+		for (i = 0; i < last_word - first_word + 1; i++) {
+			ret_val = e1000_read_eeprom(hw, first_word + i, 1,
+						    &eeprom_buff[i]);
+			if (ret_val)
 				break;
+		}
 	}
 
 	/* Device's eeprom is always little-endian, word addressable */
@@ -669,9 +671,11 @@ static int e1000_set_ringparam(struct net_device *netdev,
 
 	if (netif_running(adapter->netdev)) {
 		/* Try to get new resources before deleting old */
-		if ((err = e1000_setup_all_rx_resources(adapter)))
+		err = e1000_setup_all_rx_resources(adapter);
+		if (err)
 			goto err_setup_rx;
-		if ((err = e1000_setup_all_tx_resources(adapter)))
+		err = e1000_setup_all_tx_resources(adapter);
+		if (err)
 			goto err_setup_tx;
 
 		/* save the new, restore the old in order to free it,
@@ -685,7 +689,8 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		kfree(rx_old);
 		adapter->rx_ring = rxdr;
 		adapter->tx_ring = txdr;
-		if ((err = e1000_up(adapter)))
+		err = e1000_up(adapter);
+		if (err)
 			goto err_setup;
 	}
 
@@ -1057,17 +1062,17 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 	if (!txdr->count)
 		txdr->count = E1000_DEFAULT_TXD;
 
-	if (!(txdr->buffer_info = kcalloc(txdr->count,
-	                                  sizeof(struct e1000_buffer),
-		                          GFP_KERNEL))) {
+	txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer),
+				    GFP_KERNEL);
+	if (!txdr->buffer_info) {
 		ret_val = 1;
 		goto err_nomem;
 	}
 
 	txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
 	txdr->size = ALIGN(txdr->size, 4096);
-	if (!(txdr->desc = pci_alloc_consistent(pdev, txdr->size,
-	                                        &txdr->dma))) {
+	txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
+	if (!txdr->desc) {
 		ret_val = 2;
 		goto err_nomem;
 	}
@@ -1088,7 +1093,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 		struct sk_buff *skb;
 		unsigned int size = 1024;
 
-		if (!(skb = alloc_skb(size, GFP_KERNEL))) {
+		skb = alloc_skb(size, GFP_KERNEL);
+		if (!skb) {
 			ret_val = 3;
 			goto err_nomem;
 		}
@@ -1111,15 +1117,16 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 	if (!rxdr->count)
 		rxdr->count = E1000_DEFAULT_RXD;
 
-	if (!(rxdr->buffer_info = kcalloc(rxdr->count,
-	                                  sizeof(struct e1000_buffer),
-	                                  GFP_KERNEL))) {
+	rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
+				    GFP_KERNEL);
+	if (!rxdr->buffer_info) {
 		ret_val = 4;
 		goto err_nomem;
 	}
 
 	rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
-	if (!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) {
+	rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
+	if (!rxdr->desc) {
 		ret_val = 5;
 		goto err_nomem;
 	}
@@ -1142,8 +1149,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 		struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
 		struct sk_buff *skb;
 
-		if (!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN,
-				GFP_KERNEL))) {
+		skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
+		if (!skb) {
 			ret_val = 6;
 			goto err_nomem;
 		}
@@ -1564,9 +1571,11 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
 		goto out;
 	}
 
-	if ((*data = e1000_setup_desc_rings(adapter)))
+	*data = e1000_setup_desc_rings(adapter);
+	if (*data)
 		goto out;
-	if ((*data = e1000_setup_loopback_test(adapter)))
+	*data = e1000_setup_loopback_test(adapter);
+	if (*data)
 		goto err_loopback;
 	*data = e1000_run_loopback_test(adapter);
 	e1000_loopback_cleanup(adapter);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index cb44fded47e..0de2006e8b9 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -898,22 +898,28 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
 	DECLARE_MAC_BUF(mac);
 
-	if ((err = pci_enable_device(pdev)))
+	err = pci_enable_device(pdev);
+	if (err)
 		return err;
 
-	if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
-	    !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+	    !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
 		pci_using_dac = 1;
 	} else {
-		if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
-		    (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
-			E1000_ERR("No usable DMA configuration, aborting\n");
-			goto err_dma;
+		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (err) {
+			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+			if (err) {
+				E1000_ERR("No usable DMA configuration, "
+					  "aborting\n");
+				goto err_dma;
+			}
 		}
 		pci_using_dac = 0;
 	}
 
-	if ((err = pci_request_regions(pdev, e1000_driver_name)))
+	err = pci_request_regions(pdev, e1000_driver_name);
+	if (err)
 		goto err_pci_reg;
 
 	pci_set_master(pdev);
@@ -975,7 +981,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	/* setup the private structure */
 
-	if ((err = e1000_sw_init(adapter)))
+	err = e1000_sw_init(adapter);
+	if (err)
 		goto err_sw_init;
 
 	err = -EIO;
@@ -1182,7 +1189,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	netif_stop_queue(netdev);
 
 	strcpy(netdev->name, "eth%d");
-	if ((err = register_netdev(netdev)))
+	err = register_netdev(netdev);
+	if (err)
 		goto err_register;
 
 	DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
@@ -4400,7 +4408,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		}
 
 		for (j = 0; j < adapter->rx_ps_pages; j++) {
-			if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j])))
+			length = le16_to_cpu(rx_desc->wb.upper.length[j]);
+			if (!length)
 				break;
 			pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
 					PAGE_SIZE, PCI_DMA_FROMDEVICE);
@@ -5153,7 +5162,8 @@ static int e1000_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
-	if ((err = pci_enable_device(pdev))) {
+	err = pci_enable_device(pdev);
+	if (err) {
 		printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
 		return err;
 	}
@@ -5162,8 +5172,11 @@ static int e1000_resume(struct pci_dev *pdev)
 	pci_enable_wake(pdev, PCI_D3hot, 0);
 	pci_enable_wake(pdev, PCI_D3cold, 0);
 
-	if (netif_running(netdev) && (err = e1000_request_irq(adapter)))
-		return err;
+	if (netif_running(netdev)) {
+		err = e1000_request_irq(adapter);
+		if (err)
+			return err;
+	}
 
 	e1000_power_up_phy(adapter);
 	e1000_reset(adapter);
-- 
cgit v1.2.3


From 63cd31f60716c4a9f1b5b6ffd804326dc766d2d2 Mon Sep 17 00:00:00 2001
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri, 11 Jul 2008 15:17:33 -0700
Subject: e1000: remove email reference

The email linux-nics@intel.com is no longer available, remove all
references.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000/e1000_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 0de2006e8b9..b2c3e4cc0cb 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -866,7 +866,7 @@ static void e1000_dump_eeprom(struct e1000_adapter *adapter)
 	printk(KERN_ERR "to enable this network device.\n");
 	printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
 	       "to your hardware vendor\n");
-	printk(KERN_ERR "or Intel Customer Support: linux-nics@intel.com\n");
+	printk(KERN_ERR "or Intel Customer Support.\n");
 	printk(KERN_ERR "/*********************/\n");
 
 	kfree(data);
-- 
cgit v1.2.3


From c3570acb53c885f8accb8c85eda195781d30632f Mon Sep 17 00:00:00 2001
From: Francois Romieu <romieu@fr.zoreil.com>
Date: Fri, 11 Jul 2008 15:17:38 -0700
Subject: e1000: delete non NAPI code from the driver

Compile-tested only.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 Documentation/networking/e1000.txt |  14 +---
 drivers/net/Kconfig                |  14 ----
 drivers/net/e1000/e1000.h          |  10 +--
 drivers/net/e1000/e1000_main.c     | 151 ++++---------------------------------
 4 files changed, 16 insertions(+), 173 deletions(-)

diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 61b171cf531..2df71861e57 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -513,21 +513,11 @@ Additional Configurations
   Intel(R) PRO/1000 PT Dual Port Server Connection
   Intel(R) PRO/1000 PT Dual Port Server Adapter
   Intel(R) PRO/1000 PF Dual Port Server Adapter
-  Intel(R) PRO/1000 PT Quad Port Server Adapter 
+  Intel(R) PRO/1000 PT Quad Port Server Adapter
 
   NAPI
   ----
-  NAPI (Rx polling mode) is supported in the e1000 driver.  NAPI is enabled
-  or disabled based on the configuration of the kernel.  To override
-  the default, use the following compile-time flags.
-
-  To enable NAPI, compile the driver module, passing in a configuration option:
-
-       make CFLAGS_EXTRA=-DE1000_NAPI install
-
-  To disable NAPI, compile the driver module, passing in a configuration option:
-
-       make CFLAGS_EXTRA=-DE1000_NO_NAPI install
+  NAPI (Rx polling mode) is enabled in the e1000 driver.
 
   See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 32b89b0975a..fa533c27052 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1926,20 +1926,6 @@ config E1000
 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000.
 
-config E1000_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on E1000
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config E1000_DISABLE_PACKET_SPLIT
 	bool "Disable Packet Split for PCI express adapters"
 	depends on E1000
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 3aeba9305df..583b823f760 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -253,9 +253,7 @@ struct e1000_adapter {
 	u16 link_speed;
 	u16 link_duplex;
 	spinlock_t stats_lock;
-#ifdef CONFIG_E1000_NAPI
 	spinlock_t tx_queue_lock;
-#endif
 	unsigned int total_tx_bytes;
 	unsigned int total_tx_packets;
 	unsigned int total_rx_bytes;
@@ -293,22 +291,16 @@ struct e1000_adapter {
 	bool detect_tx_hung;
 
 	/* RX */
-#ifdef CONFIG_E1000_NAPI
 	bool (*clean_rx)(struct e1000_adapter *adapter,
 			 struct e1000_rx_ring *rx_ring,
 			 int *work_done, int work_to_do);
-#else
-	bool (*clean_rx)(struct e1000_adapter *adapter,
-			 struct e1000_rx_ring *rx_ring);
-#endif
 	void (*alloc_rx_buf)(struct e1000_adapter *adapter,
 			     struct e1000_rx_ring *rx_ring,
 			     int cleaned_count);
 	struct e1000_rx_ring *rx_ring;      /* One per active queue */
-#ifdef CONFIG_E1000_NAPI
 	struct napi_struct napi;
 	struct net_device *polling_netdev;  /* One per active queue */
-#endif
+
 	int num_tx_queues;
 	int num_rx_queues;
 
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b2c3e4cc0cb..190352c6216 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -31,12 +31,7 @@
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#ifndef CONFIG_E1000_NAPI
-#define DRIVERNAPI
-#else
-#define DRIVERNAPI "-NAPI"
-#endif
-#define DRV_VERSION "7.3.20-k2"DRIVERNAPI
+#define DRV_VERSION "7.3.20-k3-NAPI"
 const char e1000_driver_version[] = DRV_VERSION;
 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -138,7 +133,6 @@ static irqreturn_t e1000_intr(int irq, void *data);
 static irqreturn_t e1000_intr_msi(int irq, void *data);
 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 			       struct e1000_tx_ring *tx_ring);
-#ifdef CONFIG_E1000_NAPI
 static int e1000_clean(struct napi_struct *napi, int budget);
 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			       struct e1000_rx_ring *rx_ring,
@@ -146,12 +140,6 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 				  struct e1000_rx_ring *rx_ring,
 				  int *work_done, int work_to_do);
-#else
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
-			       struct e1000_rx_ring *rx_ring);
-static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
-				  struct e1000_rx_ring *rx_ring);
-#endif
 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
                                    struct e1000_rx_ring *rx_ring,
 				   int cleaned_count);
@@ -512,9 +500,8 @@ int e1000_up(struct e1000_adapter *adapter)
 
 	clear_bit(__E1000_DOWN, &adapter->flags);
 
-#ifdef CONFIG_E1000_NAPI
 	napi_enable(&adapter->napi);
-#endif
+
 	e1000_irq_enable(adapter);
 
 	/* fire a link change interrupt to start the watchdog */
@@ -602,9 +589,8 @@ void e1000_down(struct e1000_adapter *adapter)
 	 * reschedule our watchdog timer */
 	set_bit(__E1000_DOWN, &adapter->flags);
 
-#ifdef CONFIG_E1000_NAPI
 	napi_disable(&adapter->napi);
-#endif
+
 	e1000_irq_disable(adapter);
 
 	del_timer_sync(&adapter->tx_fifo_stall_timer);
@@ -966,9 +952,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	e1000_set_ethtool_ops(netdev);
 	netdev->tx_timeout = &e1000_tx_timeout;
 	netdev->watchdog_timeo = 5 * HZ;
-#ifdef CONFIG_E1000_NAPI
 	netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
-#endif
 	netdev->vlan_rx_register = e1000_vlan_rx_register;
 	netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
 	netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
@@ -1207,16 +1191,12 @@ err_eeprom:
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
 err_flashmap:
-#ifdef CONFIG_E1000_NAPI
 	for (i = 0; i < adapter->num_rx_queues; i++)
 		dev_put(&adapter->polling_netdev[i]);
-#endif
 
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
-#ifdef CONFIG_E1000_NAPI
 	kfree(adapter->polling_netdev);
-#endif
 err_sw_init:
 	iounmap(hw->hw_addr);
 err_ioremap:
@@ -1244,9 +1224,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-#ifdef CONFIG_E1000_NAPI
 	int i;
-#endif
 
 	cancel_work_sync(&adapter->reset_task);
 
@@ -1256,10 +1234,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	 * would have already happened in close and is redundant. */
 	e1000_release_hw_control(adapter);
 
-#ifdef CONFIG_E1000_NAPI
 	for (i = 0; i < adapter->num_rx_queues; i++)
 		dev_put(&adapter->polling_netdev[i]);
-#endif
 
 	unregister_netdev(netdev);
 
@@ -1268,9 +1244,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
-#ifdef CONFIG_E1000_NAPI
 	kfree(adapter->polling_netdev);
-#endif
 
 	iounmap(hw->hw_addr);
 	if (hw->flash_address)
@@ -1296,9 +1270,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
-#ifdef CONFIG_E1000_NAPI
 	int i;
-#endif
 
 	/* PCI config space info */
 
@@ -1356,14 +1328,12 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
 		return -ENOMEM;
 	}
 
-#ifdef CONFIG_E1000_NAPI
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		adapter->polling_netdev[i].priv = adapter;
 		dev_hold(&adapter->polling_netdev[i]);
 		set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
 	}
 	spin_lock_init(&adapter->tx_queue_lock);
-#endif
 
 	/* Explicitly disable IRQ since the NIC can be in any state. */
 	e1000_irq_disable(adapter);
@@ -1398,7 +1368,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
 		return -ENOMEM;
 	}
 
-#ifdef CONFIG_E1000_NAPI
 	adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
 	                                  sizeof(struct net_device),
 	                                  GFP_KERNEL);
@@ -1407,7 +1376,6 @@ static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
 		kfree(adapter->rx_ring);
 		return -ENOMEM;
 	}
-#endif
 
 	return E1000_SUCCESS;
 }
@@ -1472,9 +1440,7 @@ static int e1000_open(struct net_device *netdev)
 	/* From here on the code is the same as e1000_up() */
 	clear_bit(__E1000_DOWN, &adapter->flags);
 
-#ifdef CONFIG_E1000_NAPI
 	napi_enable(&adapter->napi);
-#endif
 
 	e1000_irq_enable(adapter);
 
@@ -2069,11 +2035,9 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 		ctrl_ext = er32(CTRL_EXT);
 		/* Reset delay timers after every interrupt */
 		ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
-#ifdef CONFIG_E1000_NAPI
 		/* Auto-Mask interrupts upon ICR access */
 		ctrl_ext |= E1000_CTRL_EXT_IAME;
 		ew32(IAM, 0xffffffff);
-#endif
 		ew32(CTRL_EXT, ctrl_ext);
 		E1000_WRITE_FLUSH();
 	}
@@ -3777,9 +3741,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-#ifndef CONFIG_E1000_NAPI
-	int i;
-#endif
 	u32 icr = er32(ICR);
 
 	/* in NAPI mode read ICR disables interrupts using IAM */
@@ -3800,7 +3761,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-#ifdef CONFIG_E1000_NAPI
 	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
 		adapter->total_tx_bytes = 0;
 		adapter->total_tx_packets = 0;
@@ -3809,20 +3769,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
 		__netif_rx_schedule(netdev, &adapter->napi);
 	} else
 		e1000_irq_enable(adapter);
-#else
-	adapter->total_tx_bytes = 0;
-	adapter->total_rx_bytes = 0;
-	adapter->total_tx_packets = 0;
-	adapter->total_rx_packets = 0;
-
-	for (i = 0; i < E1000_MAX_INTR; i++)
-		if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
-		   !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
-			break;
-
-	if (likely(adapter->itr_setting & 3))
-		e1000_set_itr(adapter);
-#endif
 
 	return IRQ_HANDLED;
 }
@@ -3839,13 +3785,10 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl, icr = er32(ICR);
-#ifndef CONFIG_E1000_NAPI
-	int i;
-#endif
+
 	if (unlikely(!icr))
 		return IRQ_NONE;  /* Not our interrupt */
 
-#ifdef CONFIG_E1000_NAPI
 	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
 	 * not set, then the adapter didn't send an interrupt */
 	if (unlikely(hw->mac_type >= e1000_82571 &&
@@ -3854,7 +3797,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
 
 	/* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
 	 * need for the IMC write */
-#endif
 
 	if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
 		hw->get_link_status = 1;
@@ -3874,7 +3816,6 @@ static irqreturn_t e1000_intr(int irq, void *data)
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-#ifdef CONFIG_E1000_NAPI
 	if (unlikely(hw->mac_type < e1000_82571)) {
 		/* disable interrupts, without the synchronize_irq bit */
 		ew32(IMC, ~0);
@@ -3890,46 +3831,14 @@ static irqreturn_t e1000_intr(int irq, void *data)
 		/* this really should not happen! if it does it is basically a
 		 * bug, but not a hard error, so enable ints and continue */
 		e1000_irq_enable(adapter);
-#else
-	/* Writing IMC and IMS is needed for 82547.
-	 * Due to Hub Link bus being occupied, an interrupt
-	 * de-assertion message is not able to be sent.
-	 * When an interrupt assertion message is generated later,
-	 * two messages are re-ordered and sent out.
-	 * That causes APIC to think 82547 is in de-assertion
-	 * state, while 82547 is in assertion state, resulting
-	 * in dead lock. Writing IMC forces 82547 into
-	 * de-assertion state.
-	 */
-	if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
-		ew32(IMC, ~0);
-
-	adapter->total_tx_bytes = 0;
-	adapter->total_rx_bytes = 0;
-	adapter->total_tx_packets = 0;
-	adapter->total_rx_packets = 0;
-
-	for (i = 0; i < E1000_MAX_INTR; i++)
-		if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
-		   !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
-			break;
 
-	if (likely(adapter->itr_setting & 3))
-		e1000_set_itr(adapter);
-
-	if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
-		e1000_irq_enable(adapter);
-
-#endif
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_E1000_NAPI
 /**
  * e1000_clean - NAPI Rx polling callback
  * @adapter: board private structure
  **/
-
 static int e1000_clean(struct napi_struct *napi, int budget)
 {
 	struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
@@ -3966,12 +3875,10 @@ static int e1000_clean(struct napi_struct *napi, int budget)
 	return work_done;
 }
 
-#endif
 /**
  * e1000_clean_tx_irq - Reclaim resources after transmit completes
  * @adapter: board private structure
  **/
-
 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 			       struct e1000_tx_ring *tx_ring)
 {
@@ -3980,9 +3887,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 	struct e1000_tx_desc *tx_desc, *eop_desc;
 	struct e1000_buffer *buffer_info;
 	unsigned int i, eop;
-#ifdef CONFIG_E1000_NAPI
 	unsigned int count = 0;
-#endif
 	bool cleaned = false;
 	unsigned int total_tx_bytes=0, total_tx_packets=0;
 
@@ -4014,11 +3919,10 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 
 		eop = tx_ring->buffer_info[i].next_to_watch;
 		eop_desc = E1000_TX_DESC(*tx_ring, eop);
-#ifdef CONFIG_E1000_NAPI
 #define E1000_TX_WEIGHT 64
 		/* weight of a sort for tx, to avoid endless transmit cleanup */
-		if (count++ == E1000_TX_WEIGHT) break;
-#endif
+		if (count++ == E1000_TX_WEIGHT)
+			break;
 	}
 
 	tx_ring->next_to_clean = i;
@@ -4131,14 +4035,9 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
  * e1000_clean_rx_irq - Send received data up the network stack; legacy
  * @adapter: board private structure
  **/
-#ifdef CONFIG_E1000_NAPI
 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			       struct e1000_rx_ring *rx_ring,
 			       int *work_done, int work_to_do)
-#else
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
-			       struct e1000_rx_ring *rx_ring)
-#endif
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
@@ -4161,11 +4060,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		struct sk_buff *skb;
 		u8 status;
 
-#ifdef CONFIG_E1000_NAPI
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
-#endif
+
 		status = rx_desc->status;
 		skb = buffer_info->skb;
 		buffer_info->skb = NULL;
@@ -4251,7 +4149,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 				  le16_to_cpu(rx_desc->csum), skb);
 
 		skb->protocol = eth_type_trans(skb, netdev);
-#ifdef CONFIG_E1000_NAPI
+
 		if (unlikely(adapter->vlgrp &&
 			    (status & E1000_RXD_STAT_VP))) {
 			vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
@@ -4259,15 +4157,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		} else {
 			netif_receive_skb(skb);
 		}
-#else /* CONFIG_E1000_NAPI */
-		if (unlikely(adapter->vlgrp &&
-			    (status & E1000_RXD_STAT_VP))) {
-			vlan_hwaccel_rx(skb, adapter->vlgrp,
-					le16_to_cpu(rx_desc->special));
-		} else {
-			netif_rx(skb);
-		}
-#endif /* CONFIG_E1000_NAPI */
+
 		netdev->last_rx = jiffies;
 
 next_desc:
@@ -4301,14 +4191,9 @@ next_desc:
  * @adapter: board private structure
  **/
 
-#ifdef CONFIG_E1000_NAPI
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 				  struct e1000_rx_ring *rx_ring,
 				  int *work_done, int work_to_do)
-#else
-static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
-				  struct e1000_rx_ring *rx_ring)
-#endif
 {
 	union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
 	struct net_device *netdev = adapter->netdev;
@@ -4331,11 +4216,11 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 	while (staterr & E1000_RXD_STAT_DD) {
 		ps_page = &rx_ring->ps_page[i];
 		ps_page_dma = &rx_ring->ps_page_dma[i];
-#ifdef CONFIG_E1000_NAPI
+
 		if (unlikely(*work_done >= work_to_do))
 			break;
 		(*work_done)++;
-#endif
+
 		skb = buffer_info->skb;
 
 		/* in the packet split case this is header only */
@@ -4437,21 +4322,14 @@ copydone:
 		if (likely(rx_desc->wb.upper.header_status &
 			   cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
 			adapter->rx_hdr_split++;
-#ifdef CONFIG_E1000_NAPI
+
 		if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
 			vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
 				le16_to_cpu(rx_desc->wb.middle.vlan));
 		} else {
 			netif_receive_skb(skb);
 		}
-#else /* CONFIG_E1000_NAPI */
-		if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
-			vlan_hwaccel_rx(skb, adapter->vlgrp,
-				le16_to_cpu(rx_desc->wb.middle.vlan));
-		} else {
-			netif_rx(skb);
-		}
-#endif /* CONFIG_E1000_NAPI */
+
 		netdev->last_rx = jiffies;
 
 next_desc:
@@ -5218,9 +5096,6 @@ static void e1000_netpoll(struct net_device *netdev)
 
 	disable_irq(adapter->pdev->irq);
 	e1000_intr(adapter->pdev->irq, netdev);
-#ifndef CONFIG_E1000_NAPI
-	adapter->clean_rx(adapter, adapter->rx_ring);
-#endif
 	enable_irq(adapter->pdev->irq);
 }
 #endif
-- 
cgit v1.2.3


From 81250297d85b26eb4e9de5decf752dce430277f9 Mon Sep 17 00:00:00 2001
From: Taku Izumi <izumi.taku@jp.fugitsu.com>
Date: Fri, 11 Jul 2008 15:17:44 -0700
Subject: e1000: make ioport free

This patch makes e1000 driver ioport-free.
This corrects behavior in probe function so as not to request ioport
resources as long as they are not really needed.  This is based on the
ioport-free patch of e1000 driver from Auke Kok and Tomohiro Kusumi.

Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jeff Kirsher<jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000/e1000.h      |  4 ++
 drivers/net/e1000/e1000_main.c | 83 +++++++++++++++++++++++++++++++++++-------
 2 files changed, 74 insertions(+), 13 deletions(-)

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 583b823f760..19e317eaf5b 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -340,6 +340,10 @@ struct e1000_adapter {
 	bool quad_port_a;
 	unsigned long flags;
 	u32 eeprom_wol;
+
+	/* for ioport free */
+	int bars;
+	int need_ioport;
 };
 
 enum e1000_state_t {
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 190352c6216..ad6da7b67e5 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -858,6 +858,42 @@ static void e1000_dump_eeprom(struct e1000_adapter *adapter)
 	kfree(data);
 }
 
+/**
+ * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Return true if an adapter needs ioport resources
+ **/
+static int e1000_is_need_ioport(struct pci_dev *pdev)
+{
+	switch (pdev->device) {
+	case E1000_DEV_ID_82540EM:
+	case E1000_DEV_ID_82540EM_LOM:
+	case E1000_DEV_ID_82540EP:
+	case E1000_DEV_ID_82540EP_LOM:
+	case E1000_DEV_ID_82540EP_LP:
+	case E1000_DEV_ID_82541EI:
+	case E1000_DEV_ID_82541EI_MOBILE:
+	case E1000_DEV_ID_82541ER:
+	case E1000_DEV_ID_82541ER_LOM:
+	case E1000_DEV_ID_82541GI:
+	case E1000_DEV_ID_82541GI_LF:
+	case E1000_DEV_ID_82541GI_MOBILE:
+	case E1000_DEV_ID_82544EI_COPPER:
+	case E1000_DEV_ID_82544EI_FIBER:
+	case E1000_DEV_ID_82544GC_COPPER:
+	case E1000_DEV_ID_82544GC_LOM:
+	case E1000_DEV_ID_82545EM_COPPER:
+	case E1000_DEV_ID_82545EM_FIBER:
+	case E1000_DEV_ID_82546EB_COPPER:
+	case E1000_DEV_ID_82546EB_FIBER:
+	case E1000_DEV_ID_82546EB_QUAD_COPPER:
+		return true;
+	default:
+		return false;
+	}
+}
+
 /**
  * e1000_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -869,7 +905,6 @@ static void e1000_dump_eeprom(struct e1000_adapter *adapter)
  * The OS initialization, configuring of the adapter private structure,
  * and a hardware reset occur.
  **/
-
 static int __devinit e1000_probe(struct pci_dev *pdev,
 				 const struct pci_device_id *ent)
 {
@@ -882,9 +917,18 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	int i, err, pci_using_dac;
 	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
+	int bars, need_ioport;
 	DECLARE_MAC_BUF(mac);
 
-	err = pci_enable_device(pdev);
+	/* do not allocate ioport bars when not needed */
+	need_ioport = e1000_is_need_ioport(pdev);
+	if (need_ioport) {
+		bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+		err = pci_enable_device(pdev);
+	} else {
+		bars = pci_select_bars(pdev, IORESOURCE_MEM);
+		err = pci_enable_device(pdev);
+	}
 	if (err)
 		return err;
 
@@ -904,7 +948,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		pci_using_dac = 0;
 	}
 
-	err = pci_request_regions(pdev, e1000_driver_name);
+	err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
 	if (err)
 		goto err_pci_reg;
 
@@ -922,6 +966,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
 	adapter->msg_enable = (1 << debug) - 1;
+	adapter->bars = bars;
+	adapter->need_ioport = need_ioport;
 
 	hw = &adapter->hw;
 	hw->back = adapter;
@@ -932,12 +978,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (!hw->hw_addr)
 		goto err_ioremap;
 
-	for (i = BAR_1; i <= BAR_5; i++) {
-		if (pci_resource_len(pdev, i) == 0)
-			continue;
-		if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
-			hw->io_base = pci_resource_start(pdev, i);
-			break;
+	if (adapter->need_ioport) {
+		for (i = BAR_1; i <= BAR_5; i++) {
+			if (pci_resource_len(pdev, i) == 0)
+				continue;
+			if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+				hw->io_base = pci_resource_start(pdev, i);
+				break;
+			}
 		}
 	}
 
@@ -1202,7 +1250,7 @@ err_sw_init:
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, bars);
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -1249,7 +1297,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	iounmap(hw->hw_addr);
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, adapter->bars);
 
 	free_netdev(netdev);
 
@@ -5040,7 +5088,11 @@ static int e1000_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
-	err = pci_enable_device(pdev);
+
+	if (adapter->need_ioport)
+		err = pci_enable_device(pdev);
+	else
+		err = pci_enable_device_mem(pdev);
 	if (err) {
 		printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
 		return err;
@@ -5136,8 +5188,13 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev->priv;
 	struct e1000_hw *hw = &adapter->hw;
+	int err;
 
-	if (pci_enable_device(pdev)) {
+	if (adapter->need_ioport)
+		err = pci_enable_device(pdev);
+	else
+		err = pci_enable_device_mem(pdev);
+	if (err) {
 		printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
-- 
cgit v1.2.3


From 9dadae686fce02a02982fc9c0563f6b917217a66 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Fri, 18 Jul 2008 18:59:12 +0100
Subject: sfc: I2C adapter initialisation fixes

As recommended by Jean Delvare:
- Increase timeout to 50 ms
- Leave adapter class clear so that unwanted drivers do not probe our bus
- Use strlcpy() for name initialisation

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/sfc/falcon.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 630406e142e..9138ee5b7b7 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -223,13 +223,8 @@ static struct i2c_algo_bit_data falcon_i2c_bit_operations = {
 	.getsda		= falcon_getsda,
 	.getscl		= falcon_getscl,
 	.udelay		= 5,
-	/*
-	 * This is the number of system clock ticks after which
-	 * i2c-algo-bit gives up waiting for SCL to become high.
-	 * It must be at least 2 since the first tick can happen
-	 * immediately after it starts waiting.
-	 */
-	.timeout	= 2,
+	/* Wait up to 50 ms for slave to let us pull SCL high */
+	.timeout	= DIV_ROUND_UP(HZ, 20),
 };
 
 /**************************************************************************
@@ -2479,12 +2474,11 @@ int falcon_probe_nic(struct efx_nic *efx)
 
 	/* Initialise I2C adapter */
  	efx->i2c_adap.owner = THIS_MODULE;
- 	efx->i2c_adap.class = I2C_CLASS_HWMON;
 	nic_data->i2c_data = falcon_i2c_bit_operations;
 	nic_data->i2c_data.data = efx;
  	efx->i2c_adap.algo_data = &nic_data->i2c_data;
 	efx->i2c_adap.dev.parent = &efx->pci_dev->dev;
-	strcpy(efx->i2c_adap.name, "SFC4000 GPIO");
+	strlcpy(efx->i2c_adap.name, "SFC4000 GPIO", sizeof(efx->i2c_adap.name));
 	rc = i2c_bit_add_bus(&efx->i2c_adap);
 	if (rc)
 		goto fail5;
-- 
cgit v1.2.3


From 8d9853d911b9d3fb767c3886066530c0e39b78ba Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Fri, 18 Jul 2008 19:01:20 +0100
Subject: sfc: Use a separate workqueue for resets

This avoids deadlock in case a reset is triggered during self-test.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/sfc/efx.c        | 20 +++++++++++++++++---
 drivers/net/sfc/net_driver.h |  5 ++++-
 2 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 7b2015f9e46..7b2a8186623 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1762,7 +1762,7 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
 
 	efx->reset_pending = method;
 
-	queue_work(efx->workqueue, &efx->reset_work);
+	queue_work(efx->reset_workqueue, &efx->reset_work);
 }
 
 /**************************************************************************
@@ -1907,14 +1907,28 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
 		goto fail1;
 	}
 
+	efx->reset_workqueue = create_singlethread_workqueue("sfc_reset");
+	if (!efx->reset_workqueue) {
+		rc = -ENOMEM;
+		goto fail2;
+	}
+
 	return 0;
 
+ fail2:
+	destroy_workqueue(efx->workqueue);
+	efx->workqueue = NULL;
+
  fail1:
 	return rc;
 }
 
 static void efx_fini_struct(struct efx_nic *efx)
 {
+	if (efx->reset_workqueue) {
+		destroy_workqueue(efx->reset_workqueue);
+		efx->reset_workqueue = NULL;
+	}
 	if (efx->workqueue) {
 		destroy_workqueue(efx->workqueue);
 		efx->workqueue = NULL;
@@ -1977,7 +1991,7 @@ static void efx_pci_remove(struct pci_dev *pci_dev)
 	 * scheduled from this point because efx_stop_all() has been
 	 * called, we are no longer registered with driverlink, and
 	 * the net_device's have been removed. */
-	flush_workqueue(efx->workqueue);
+	flush_workqueue(efx->reset_workqueue);
 
 	efx_pci_remove_main(efx);
 
@@ -2098,7 +2112,7 @@ static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
 		 * scheduled since efx_stop_all() has been called, and we
 		 * have not and never have been registered with either
 		 * the rtnetlink or driverlink layers. */
-		cancel_work_sync(&efx->reset_work);
+		flush_workqueue(efx->reset_workqueue);
 
 		/* Retry if a recoverably reset event has been scheduled */
 		if ((efx->reset_pending != RESET_TYPE_INVISIBLE) &&
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index d803b86c647..219c74a772c 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -616,7 +616,9 @@ union efx_multicast_hash {
  * @pci_dev: The PCI device
  * @type: Controller type attributes
  * @legacy_irq: IRQ number
- * @workqueue: Workqueue for resets, port reconfigures and the HW monitor
+ * @workqueue: Workqueue for port reconfigures and the HW monitor.
+ *	Work items do not hold and must not acquire RTNL.
+ * @reset_workqueue: Workqueue for resets.  Work item will acquire RTNL.
  * @reset_work: Scheduled reset workitem
  * @monitor_work: Hardware monitor workitem
  * @membase_phys: Memory BAR value as physical address
@@ -684,6 +686,7 @@ struct efx_nic {
 	const struct efx_nic_type *type;
 	int legacy_irq;
 	struct workqueue_struct *workqueue;
+	struct workqueue_struct *reset_workqueue;
 	struct work_struct reset_work;
 	struct delayed_work monitor_work;
 	resource_size_t membase_phys;
-- 
cgit v1.2.3


From aa6ef27ea906e74bd23d14f43f095c012469d9c7 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Fri, 18 Jul 2008 19:03:10 +0100
Subject: sfc: Create one RX queue and interrupt per CPU package by default

Using multiple cores in the same package to handle received traffic
does not appear to provide a performance benefit.  Therefore use CPU
topology information to count CPU packages and use that as the default
number of RX queues and interrupts.  We rely on interrupt balancing to
spread the interrupts across packages.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/sfc/efx.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 7b2a8186623..45c72eebb3a 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -19,6 +19,7 @@
 #include <linux/in.h>
 #include <linux/crc32.h>
 #include <linux/ethtool.h>
+#include <linux/topology.h>
 #include "net_driver.h"
 #include "gmii.h"
 #include "ethtool.h"
@@ -832,7 +833,23 @@ static void efx_probe_interrupts(struct efx_nic *efx)
 	if (efx->interrupt_mode == EFX_INT_MODE_MSIX) {
 		BUG_ON(!pci_find_capability(efx->pci_dev, PCI_CAP_ID_MSIX));
 
-		efx->rss_queues = rss_cpus ? rss_cpus : num_online_cpus();
+		if (rss_cpus == 0) {
+			cpumask_t core_mask;
+			int cpu;
+
+			cpus_clear(core_mask);
+			efx->rss_queues = 0;
+			for_each_online_cpu(cpu) {
+				if (!cpu_isset(cpu, core_mask)) {
+					++efx->rss_queues;
+					cpus_or(core_mask, core_mask,
+						topology_core_siblings(cpu));
+				}
+			}
+		} else {
+			efx->rss_queues = rss_cpus;
+		}
+
 		efx->rss_queues = min(efx->rss_queues, max_channel + 1);
 		efx->rss_queues = min(efx->rss_queues, EFX_MAX_CHANNELS);
 
-- 
cgit v1.2.3


From 7a2f53ee0b56ff7e1c0c24404575cb62935d37d9 Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Thu, 17 Jul 2008 11:01:26 +0300
Subject: at91_ether: use netstats in net_device structure

Use net_device_stats from net_device structure instead of local.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/arm/at91_ether.c | 39 +++++++++++++++++++--------------------
 drivers/net/arm/at91_ether.h |  1 -
 2 files changed, 19 insertions(+), 21 deletions(-)

diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 1e39e78f177..49c320bca34 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -820,7 +820,7 @@ static int at91ether_tx(struct sk_buff *skb, struct net_device *dev)
 		lp->skb = skb;
 		lp->skb_length = skb->len;
 		lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-		lp->stats.tx_bytes += skb->len;
+		dev->stats.tx_bytes += skb->len;
 
 		/* Set address of the data in the Transmit Address register */
 		at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr);
@@ -843,34 +843,33 @@ static int at91ether_tx(struct sk_buff *skb, struct net_device *dev)
  */
 static struct net_device_stats *at91ether_stats(struct net_device *dev)
 {
-	struct at91_private *lp = netdev_priv(dev);
 	int ale, lenerr, seqe, lcol, ecol;
 
 	if (netif_running(dev)) {
-		lp->stats.rx_packets += at91_emac_read(AT91_EMAC_OK);		/* Good frames received */
+		dev->stats.rx_packets += at91_emac_read(AT91_EMAC_OK);		/* Good frames received */
 		ale = at91_emac_read(AT91_EMAC_ALE);
-		lp->stats.rx_frame_errors += ale;				/* Alignment errors */
+		dev->stats.rx_frame_errors += ale;				/* Alignment errors */
 		lenerr = at91_emac_read(AT91_EMAC_ELR) + at91_emac_read(AT91_EMAC_USF);
-		lp->stats.rx_length_errors += lenerr;				/* Excessive Length or Undersize Frame error */
+		dev->stats.rx_length_errors += lenerr;				/* Excessive Length or Undersize Frame error */
 		seqe = at91_emac_read(AT91_EMAC_SEQE);
-		lp->stats.rx_crc_errors += seqe;				/* CRC error */
-		lp->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC);	/* Receive buffer not available */
-		lp->stats.rx_errors += (ale + lenerr + seqe
+		dev->stats.rx_crc_errors += seqe;				/* CRC error */
+		dev->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC);	/* Receive buffer not available */
+		dev->stats.rx_errors += (ale + lenerr + seqe
 			+ at91_emac_read(AT91_EMAC_CDE) + at91_emac_read(AT91_EMAC_RJB));
 
-		lp->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA);		/* Frames successfully transmitted */
-		lp->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE);	/* Transmit FIFO underruns */
-		lp->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE);	/* Carrier Sense errors */
-		lp->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
+		dev->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA);		/* Frames successfully transmitted */
+		dev->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE);	/* Transmit FIFO underruns */
+		dev->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE);	/* Carrier Sense errors */
+		dev->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
 
 		lcol = at91_emac_read(AT91_EMAC_LCOL);
 		ecol = at91_emac_read(AT91_EMAC_ECOL);
-		lp->stats.tx_window_errors += lcol;			/* Late collisions */
-		lp->stats.tx_aborted_errors += ecol;			/* 16 collisions */
+		dev->stats.tx_window_errors += lcol;			/* Late collisions */
+		dev->stats.tx_aborted_errors += ecol;			/* 16 collisions */
 
-		lp->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
+		dev->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
 	}
-	return &lp->stats;
+	return &dev->stats;
 }
 
 /*
@@ -896,16 +895,16 @@ static void at91ether_rx(struct net_device *dev)
 
 			skb->protocol = eth_type_trans(skb, dev);
 			dev->last_rx = jiffies;
-			lp->stats.rx_bytes += pktlen;
+			dev->stats.rx_bytes += pktlen;
 			netif_rx(skb);
 		}
 		else {
-			lp->stats.rx_dropped += 1;
+			dev->stats.rx_dropped += 1;
 			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
 		}
 
 		if (dlist->descriptors[lp->rxBuffIndex].size & EMAC_MULTICAST)
-			lp->stats.multicast++;
+			dev->stats.multicast++;
 
 		dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE;	/* reset ownership bit */
 		if (lp->rxBuffIndex == MAX_RX_DESCR-1)				/* wrap after last buffer */
@@ -934,7 +933,7 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
 	if (intstatus & AT91_EMAC_TCOM) {	/* Transmit complete */
 		/* The TCOM bit is set even if the transmission failed. */
 		if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
-			lp->stats.tx_errors += 1;
+			dev->stats.tx_errors += 1;
 
 		if (lp->skb) {
 			dev_kfree_skb_irq(lp->skb);
diff --git a/drivers/net/arm/at91_ether.h b/drivers/net/arm/at91_ether.h
index a38fd2d053a..353f4dab62b 100644
--- a/drivers/net/arm/at91_ether.h
+++ b/drivers/net/arm/at91_ether.h
@@ -84,7 +84,6 @@ struct recv_desc_bufs
 
 struct at91_private
 {
-	struct net_device_stats stats;
 	struct mii_if_info mii;			/* ethtool support */
 	struct at91_eth_data board_data;	/* board-specific configuration */
 	struct clk *ether_clk;			/* clock */
-- 
cgit v1.2.3


From 7e99eeddb35cdaafb820676a57517b5e58685e4c Mon Sep 17 00:00:00 2001
From: Thomas Backlund <tmb@mandriva.org>
Date: Tue, 22 Jul 2008 13:55:58 -0700
Subject: rndis_host: support WM6 devices as modems

This patch allows Windows Mobile 6 devices to be used for
tethering -- that is, used as modems.  It was requested by
AdamW in kernel bugzilla:

  http://bugzilla.kernel.org/show_bug.cgi?id=11119

and Mandriva kernel-discuss list.  It is tested and confirmed
to work by Peterl:

  http://forum.eeeuser.com/viewtopic.php?pid=323543#p323543

This patch is based on the patch in the above kernel bugzilla,
which is from the usb-rndis-lite tree.

[ dbrownell@users.sourceforge.net: misc fixes ]
Signed-off-by: Thomas Backlund <tmb@mandriva.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/cdc_ether.c  | 11 ++++++++++-
 drivers/net/usb/rndis_host.c |  4 ++++
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index a934428a589..0e061dfea78 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -50,10 +50,18 @@ static int is_activesync(struct usb_interface_descriptor *desc)
 		&& desc->bInterfaceProtocol == 1;
 }
 
+static int is_wireless_rndis(struct usb_interface_descriptor *desc)
+{
+	return desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER
+		&& desc->bInterfaceSubClass == 1
+		&& desc->bInterfaceProtocol == 3;
+}
+
 #else
 
 #define is_rndis(desc)		0
 #define is_activesync(desc)	0
+#define is_wireless_rndis(desc)	0
 
 #endif
 
@@ -110,7 +118,8 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 	 * of cdc-acm, it'll fail RNDIS requests cleanly.
 	 */
 	rndis = is_rndis(&intf->cur_altsetting->desc)
-		|| is_activesync(&intf->cur_altsetting->desc);
+		|| is_activesync(&intf->cur_altsetting->desc)
+		|| is_wireless_rndis(&intf->cur_altsetting->desc);
 
 	memset(info, 0, sizeof *info);
 	info->control = intf;
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 61c98beb4d1..bcd858c567e 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -576,6 +576,10 @@ static const struct usb_device_id	products [] = {
 	/* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
 	USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
 	.driver_info = (unsigned long) &rndis_info,
+}, {
+	/* RNDIS for tethering */
+	USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
+	.driver_info = (unsigned long) &rndis_info,
 },
 	{ },		// END
 };
-- 
cgit v1.2.3


From c6e69bb92ed6e22a0931e29daff6539f2bac29b9 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 13:39:32 +0200
Subject: r6040: prefix all functions with r6040

Prefix all functions inside the r6040 driver with r6040 to
avoid namespace clashing.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 60 ++++++++++++++++++++++++++---------------------------
 1 file changed, 30 insertions(+), 30 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 504a48ff73c..4e67884bdc9 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -183,7 +183,7 @@ static char version[] __devinitdata = KERN_INFO DRV_NAME
 static int phy_table[] = { PHY1_ADDR, PHY2_ADDR };
 
 /* Read a word data from PHY Chip */
-static int phy_read(void __iomem *ioaddr, int phy_addr, int reg)
+static int r6040_phy_read(void __iomem *ioaddr, int phy_addr, int reg)
 {
 	int limit = 2048;
 	u16 cmd;
@@ -200,7 +200,7 @@ static int phy_read(void __iomem *ioaddr, int phy_addr, int reg)
 }
 
 /* Write a word data from PHY Chip */
-static void phy_write(void __iomem *ioaddr, int phy_addr, int reg, u16 val)
+static void r6040_phy_write(void __iomem *ioaddr, int phy_addr, int reg, u16 val)
 {
 	int limit = 2048;
 	u16 cmd;
@@ -216,20 +216,20 @@ static void phy_write(void __iomem *ioaddr, int phy_addr, int reg, u16 val)
 	}
 }
 
-static int mdio_read(struct net_device *dev, int mii_id, int reg)
+static int r6040_mdio_read(struct net_device *dev, int mii_id, int reg)
 {
 	struct r6040_private *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
 
-	return (phy_read(ioaddr, lp->phy_addr, reg));
+	return (r6040_phy_read(ioaddr, lp->phy_addr, reg));
 }
 
-static void mdio_write(struct net_device *dev, int mii_id, int reg, int val)
+static void r6040_mdio_write(struct net_device *dev, int mii_id, int reg, int val)
 {
 	struct r6040_private *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
 
-	phy_write(ioaddr, lp->phy_addr, reg, val);
+	r6040_phy_write(ioaddr, lp->phy_addr, reg, val);
 }
 
 static void r6040_free_txbufs(struct net_device *dev)
@@ -284,7 +284,7 @@ static void r6040_init_ring_desc(struct r6040_descriptor *desc_ring,
 }
 
 /* Allocate skb buffer for rx descriptor */
-static void rx_buf_alloc(struct r6040_private *lp, struct net_device *dev)
+static void r6040_rx_buf_alloc(struct r6040_private *lp, struct net_device *dev)
 {
 	struct r6040_descriptor *descptr;
 	void __iomem *ioaddr = lp->base;
@@ -331,7 +331,7 @@ static void r6040_alloc_rxbufs(struct net_device *dev)
 	lp->rx_remove_ptr = lp->rx_insert_ptr = lp->rx_ring;
 	r6040_init_ring_desc(lp->rx_ring, lp->rx_ring_dma, RX_DCNT);
 
-	rx_buf_alloc(lp, dev);
+	r6040_rx_buf_alloc(lp, dev);
 
 	iowrite16(lp->rx_ring_dma, ioaddr + MRD_SA0);
 	iowrite16(lp->rx_ring_dma >> 16, ioaddr + MRD_SA1);
@@ -345,7 +345,7 @@ static void r6040_tx_timeout(struct net_device *dev)
 	printk(KERN_WARNING "%s: transmit timed out, status %4.4x, PHY status "
 		"%4.4x\n",
 		dev->name, ioread16(ioaddr + MIER),
-		mdio_read(dev, priv->mii_if.phy_id, MII_BMSR));
+		r6040_mdio_read(dev, priv->mii_if.phy_id, MII_BMSR));
 
 	disable_irq(dev->irq);
 	napi_disable(&priv->napi);
@@ -432,23 +432,23 @@ static int r6040_close(struct net_device *dev)
 }
 
 /* Status of PHY CHIP */
-static int phy_mode_chk(struct net_device *dev)
+static int r6040_phy_mode_chk(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
 	int phy_dat;
 
 	/* PHY Link Status Check */
-	phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
+	phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1);
 	if (!(phy_dat & 0x4))
 		phy_dat = 0x8000;	/* Link Failed, full duplex */
 
 	/* PHY Chip Auto-Negotiation Status */
-	phy_dat = phy_read(ioaddr, lp->phy_addr, 1);
+	phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1);
 	if (phy_dat & 0x0020) {
 		/* Auto Negotiation Mode */
-		phy_dat = phy_read(ioaddr, lp->phy_addr, 5);
-		phy_dat &= phy_read(ioaddr, lp->phy_addr, 4);
+		phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 5);
+		phy_dat &= r6040_phy_read(ioaddr, lp->phy_addr, 4);
 		if (phy_dat & 0x140)
 			/* Force full duplex */
 			phy_dat = 0x8000;
@@ -456,7 +456,7 @@ static int phy_mode_chk(struct net_device *dev)
 			phy_dat = 0;
 	} else {
 		/* Force Mode */
-		phy_dat = phy_read(ioaddr, lp->phy_addr, 0);
+		phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 0);
 		if (phy_dat & 0x100)
 			phy_dat = 0x8000;
 		else
@@ -468,12 +468,12 @@ static int phy_mode_chk(struct net_device *dev)
 
 static void r6040_set_carrier(struct mii_if_info *mii)
 {
-	if (phy_mode_chk(mii->dev)) {
+	if (r6040_phy_mode_chk(mii->dev)) {
 		/* autoneg is off: Link is always assumed to be up */
 		if (!netif_carrier_ok(mii->dev))
 			netif_carrier_on(mii->dev);
 	} else
-		phy_mode_chk(mii->dev);
+		r6040_phy_mode_chk(mii->dev);
 }
 
 static int r6040_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
@@ -560,7 +560,7 @@ static int r6040_rx(struct net_device *dev, int limit)
 	}
 	/* Allocate new RX buffer */
 	if (priv->rx_free_desc < RX_DCNT)
-		rx_buf_alloc(priv, priv->dev);
+		r6040_rx_buf_alloc(priv, priv->dev);
 
 	return count;
 }
@@ -672,18 +672,18 @@ static void r6040_up(struct net_device *dev)
 	/* Buffer Size Register */
 	iowrite16(MAX_BUF_SIZE, ioaddr + MR_BSR);
 	/* Read the PHY ID */
-	lp->switch_sig = phy_read(ioaddr, 0, 2);
+	lp->switch_sig = r6040_phy_read(ioaddr, 0, 2);
 
 	if (lp->switch_sig  == ICPLUS_PHY_ID) {
-		phy_write(ioaddr, 29, 31, 0x175C); /* Enable registers */
+		r6040_phy_write(ioaddr, 29, 31, 0x175C); /* Enable registers */
 		lp->phy_mode = 0x8000;
 	} else {
 		/* PHY Mode Check */
-		phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
-		phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
+		r6040_phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
+		r6040_phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
 
 		if (PHY_MODE == 0x3100)
-			lp->phy_mode = phy_mode_chk(dev);
+			lp->phy_mode = r6040_phy_mode_chk(dev);
 		else
 			lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
 	}
@@ -699,10 +699,10 @@ static void r6040_up(struct net_device *dev)
 	iowrite16(0x0F06, ioaddr + MR_ICR);
 
 	/* improve performance (by RDC guys) */
-	phy_write(ioaddr, 30, 17, (phy_read(ioaddr, 30, 17) | 0x4000));
-	phy_write(ioaddr, 30, 17, ~((~phy_read(ioaddr, 30, 17)) | 0x2000));
-	phy_write(ioaddr, 0, 19, 0x0000);
-	phy_write(ioaddr, 0, 30, 0x01F0);
+	r6040_phy_write(ioaddr, 30, 17, (r6040_phy_read(ioaddr, 30, 17) | 0x4000));
+	r6040_phy_write(ioaddr, 30, 17, ~((~r6040_phy_read(ioaddr, 30, 17)) | 0x2000));
+	r6040_phy_write(ioaddr, 0, 19, 0x0000);
+	r6040_phy_write(ioaddr, 0, 30, 0x01F0);
 
 	/* Interrupt Mask Register */
 	iowrite16(INT_MASK, ioaddr + MIER);
@@ -721,7 +721,7 @@ static void r6040_timer(unsigned long data)
 
 	/* Polling PHY Chip Status */
 	if (PHY_MODE == 0x3100)
-		phy_mode = phy_mode_chk(dev);
+		phy_mode = r6040_phy_mode_chk(dev);
 	else
 		phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
 
@@ -1070,8 +1070,8 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 #endif
 	netif_napi_add(dev, &lp->napi, r6040_poll, 64);
 	lp->mii_if.dev = dev;
-	lp->mii_if.mdio_read = mdio_read;
-	lp->mii_if.mdio_write = mdio_write;
+	lp->mii_if.mdio_read = r6040_mdio_read;
+	lp->mii_if.mdio_write = r6040_mdio_write;
 	lp->mii_if.phy_id = lp->phy_addr;
 	lp->mii_if.phy_id_mask = 0x1f;
 	lp->mii_if.reg_num_mask = 0x1f;
-- 
cgit v1.2.3


From 3d25434816356e8d1e3167c5f7a56d3d81aeb239 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 14:28:27 +0200
Subject: r6040: fix null pointer access and tx timeouts

This patch fixes a null pointer access in r6040_rx due
to lp->dev not being initialized.

Fix the TX timeouts, TX irq was not re-enabled on RX irq

Signed-Off-By: Joerg Albert <jal2@gmx.de>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 4e67884bdc9..d277deb872e 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -91,6 +91,14 @@
 #define MISR		0x3C	/* Status register */
 #define MIER		0x40	/* INT enable register */
 #define  MSK_INT	0x0000	/* Mask off interrupts */
+#define  RX_FINISH	0x0001  /* RX finished */
+#define  RX_NO_DESC	0x0002  /* No RX descriptor available */
+#define  RX_FIFO_FULL	0x0004  /* RX FIFO full */
+#define  RX_EARLY	0x0008  /* RX early */
+#define  TX_FINISH	0x0010  /* TX finished */
+#define  TX_EARLY	0x0080  /* TX early */
+#define  EVENT_OVRFL	0x0100  /* Event counter overflow */
+#define  LINK_CHANGED	0x0200  /* PHY link changed */
 #define ME_CISR		0x44	/* Event counter INT status */
 #define ME_CIER		0x48	/* Event counter INT enable  */
 #define MR_CNT		0x50	/* Successfully received packet counter */
@@ -139,10 +147,10 @@ MODULE_AUTHOR("Sten Wang <sten.wang@rdc.com.tw>,"
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet driver");
 
-#define RX_INT                         0x0001
-#define TX_INT                         0x0010
-#define RX_NO_DESC_INT                 0x0002
-#define INT_MASK                 (RX_INT | TX_INT)
+/* RX and TX interrupts that we handle */
+#define RX_INT			(RX_FINISH)
+#define TX_INT			(TX_FINISH)
+#define INT_MASK		(RX_INT | TX_INT)
 
 struct r6040_descriptor {
 	u16	status, len;		/* 0-3 */
@@ -502,8 +510,6 @@ static int r6040_rx(struct net_device *dev, int limit)
 		struct r6040_descriptor *descptr = priv->rx_remove_ptr;
 		struct sk_buff *skb_ptr;
 
-		/* Disable RX interrupt */
-		iowrite16(ioread16(ioaddr + MIER) & (~RX_INT), ioaddr + MIER);
 		descptr = priv->rx_remove_ptr;
 
 		/* Check for errors */
@@ -639,8 +645,9 @@ static irqreturn_t r6040_interrupt(int irq, void *dev_id)
 
 	/* RX interrupt request */
 	if (status & 0x01) {
+		/* Mask off RX interrupt */
+		iowrite16(ioread16(ioaddr + MIER) & ~RX_INT, ioaddr + MIER);
 		netif_rx_schedule(dev, &lp->napi);
-		iowrite16(TX_INT, ioaddr + MIER);
 	}
 
 	/* TX interrupt request */
@@ -687,7 +694,11 @@ static void r6040_up(struct net_device *dev)
 		else
 			lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
 	}
-	/* MAC Bus Control Register */
+	/* MAC Bus Control Register :
+	 * - wait 1 host clock SDRAM bus request
+	 * - RX FIFO : 32 bytes 
+	 * - TX FIFO : 64 bytes 
+	 * - FIFO transfer lenght : 16 bytes */
 	iowrite16(MBCR_DEFAULT, ioaddr + MBCR);
 
 	/* MAC TX/RX Enable */
@@ -1018,6 +1029,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	lp = netdev_priv(dev);
 	lp->pdev = pdev;
+	lp->dev = dev;
 
 	if (pci_request_regions(pdev, DRV_NAME)) {
 		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
-- 
cgit v1.2.3


From fec3a23be0daceeb0695f8296aea07ea1ad073d8 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 14:29:20 +0200
Subject: r6040: fix scheduling while atomic in r6040_tx_timeout

Add a helper function which only modifies R6040 MAC registers
use it when we timeout, and on adapter initialization. Fix
the scheduling while atomic but in the timeout routine due
to the reallocation of rx/tx buffers.

Signed-Off-By: Joerg Albert <jal2@gmx.de>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 99 +++++++++++++++++++++++++++++++----------------------
 1 file changed, 58 insertions(+), 41 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index d277deb872e..0972152e5d2 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -295,7 +295,6 @@ static void r6040_init_ring_desc(struct r6040_descriptor *desc_ring,
 static void r6040_rx_buf_alloc(struct r6040_private *lp, struct net_device *dev)
 {
 	struct r6040_descriptor *descptr;
-	void __iomem *ioaddr = lp->base;
 
 	descptr = lp->rx_insert_ptr;
 	while (lp->rx_free_desc < RX_DCNT) {
@@ -309,8 +308,6 @@ static void r6040_rx_buf_alloc(struct r6040_private *lp, struct net_device *dev)
 		descptr->status = 0x8000;
 		descptr = descptr->vndescp;
 		lp->rx_free_desc++;
-		/* Trigger RX DMA */
-		iowrite16(lp->mcr0 | 0x0002, ioaddr);
 	}
 	lp->rx_insert_ptr = descptr;
 }
@@ -318,21 +315,16 @@ static void r6040_rx_buf_alloc(struct r6040_private *lp, struct net_device *dev)
 static void r6040_alloc_txbufs(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
 
 	lp->tx_free_desc = TX_DCNT;
 
 	lp->tx_remove_ptr = lp->tx_insert_ptr = lp->tx_ring;
 	r6040_init_ring_desc(lp->tx_ring, lp->tx_ring_dma, TX_DCNT);
-
-	iowrite16(lp->tx_ring_dma, ioaddr + MTD_SA0);
-	iowrite16(lp->tx_ring_dma >> 16, ioaddr + MTD_SA1);
 }
 
 static void r6040_alloc_rxbufs(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
 
 	lp->rx_free_desc = 0;
 
@@ -340,9 +332,58 @@ static void r6040_alloc_rxbufs(struct net_device *dev)
 	r6040_init_ring_desc(lp->rx_ring, lp->rx_ring_dma, RX_DCNT);
 
 	r6040_rx_buf_alloc(lp, dev);
+}
+
+static void r6040_init_mac_regs(struct net_device *dev)
+{
+	struct r6040_private *lp = netdev_priv(dev);
+	void __iomem *ioaddr = lp->base;
+	int limit = 2048;
+	u16 cmd;
+
+	/* Mask Off Interrupt */
+	iowrite16(MSK_INT, ioaddr + MIER);
 
+	/* Reset RDC MAC */
+	iowrite16(MAC_RST, ioaddr + MCR1);
+	while (limit--) {
+		cmd = ioread16(ioaddr + MCR1);
+		if (cmd & 0x1)
+			break;
+	}
+	/* Reset internal state machine */
+	iowrite16(2, ioaddr + MAC_SM);
+	iowrite16(0, ioaddr + MAC_SM);
+	udelay(5000);
+
+	/* MAC Bus Control Register */
+	iowrite16(MBCR_DEFAULT, ioaddr + MBCR);
+
+	/* Buffer Size Register */
+	iowrite16(MAX_BUF_SIZE, ioaddr + MR_BSR);
+
+	/* Write TX ring start address */
+	iowrite16(lp->tx_ring_dma, ioaddr + MTD_SA0);
+	iowrite16(lp->tx_ring_dma >> 16, ioaddr + MTD_SA1);
+
+	/* Write RX ring start address */
 	iowrite16(lp->rx_ring_dma, ioaddr + MRD_SA0);
 	iowrite16(lp->rx_ring_dma >> 16, ioaddr + MRD_SA1);
+
+	/* Set interrupt waiting time and packet numbers */
+	iowrite16(0x0F06, ioaddr + MT_ICR);
+	iowrite16(0x0F06, ioaddr + MR_ICR);
+
+	/* Enable interrupts */
+	iowrite16(INT_MASK, ioaddr + MIER);
+
+	/* Enable TX and RX */
+	iowrite16(lp->mcr0 | 0x0002, ioaddr);
+
+	/* Let TX poll the descriptors
+	 * we may got called by r6040_tx_timeout which has left
+	 * some unsent tx buffers */
+	iowrite16(0x01, ioaddr + MTPR);
 }
 
 static void r6040_tx_timeout(struct net_device *dev)
@@ -350,27 +391,16 @@ static void r6040_tx_timeout(struct net_device *dev)
 	struct r6040_private *priv = netdev_priv(dev);
 	void __iomem *ioaddr = priv->base;
 
-	printk(KERN_WARNING "%s: transmit timed out, status %4.4x, PHY status "
-		"%4.4x\n",
+	printk(KERN_WARNING "%s: transmit timed out, int enable %4.4x "
+		"status %4.4x, PHY status %4.4x\n",
 		dev->name, ioread16(ioaddr + MIER),
+		ioread16(ioaddr + MISR),
 		r6040_mdio_read(dev, priv->mii_if.phy_id, MII_BMSR));
 
-	disable_irq(dev->irq);
-	napi_disable(&priv->napi);
-	spin_lock(&priv->lock);
-	/* Clear all descriptors */
-	r6040_free_txbufs(dev);
-	r6040_free_rxbufs(dev);
-	r6040_alloc_txbufs(dev);
-	r6040_alloc_rxbufs(dev);
-
-	/* Reset MAC */
-	iowrite16(MAC_RST, ioaddr + MCR1);
-	spin_unlock(&priv->lock);
-	enable_irq(dev->irq);
-
 	dev->stats.tx_errors++;
-	netif_wake_queue(dev);
+
+	/* Reset MAC and re-init all registers */
+	r6040_init_mac_regs(dev);
 }
 
 static struct net_device_stats *r6040_get_stats(struct net_device *dev)
@@ -676,8 +706,6 @@ static void r6040_up(struct net_device *dev)
 	r6040_alloc_txbufs(dev);
 	r6040_alloc_rxbufs(dev);
 
-	/* Buffer Size Register */
-	iowrite16(MAX_BUF_SIZE, ioaddr + MR_BSR);
 	/* Read the PHY ID */
 	lp->switch_sig = r6040_phy_read(ioaddr, 0, 2);
 
@@ -694,20 +722,9 @@ static void r6040_up(struct net_device *dev)
 		else
 			lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
 	}
-	/* MAC Bus Control Register :
-	 * - wait 1 host clock SDRAM bus request
-	 * - RX FIFO : 32 bytes 
-	 * - TX FIFO : 64 bytes 
-	 * - FIFO transfer lenght : 16 bytes */
-	iowrite16(MBCR_DEFAULT, ioaddr + MBCR);
 
-	/* MAC TX/RX Enable */
+	/* Set duplex mode */
 	lp->mcr0 |= lp->phy_mode;
-	iowrite16(lp->mcr0, ioaddr);
-
-	/* set interrupt waiting time and packet numbers */
-	iowrite16(0x0F06, ioaddr + MT_ICR);
-	iowrite16(0x0F06, ioaddr + MR_ICR);
 
 	/* improve performance (by RDC guys) */
 	r6040_phy_write(ioaddr, 30, 17, (r6040_phy_read(ioaddr, 30, 17) | 0x4000));
@@ -715,8 +732,8 @@ static void r6040_up(struct net_device *dev)
 	r6040_phy_write(ioaddr, 0, 19, 0x0000);
 	r6040_phy_write(ioaddr, 0, 30, 0x01F0);
 
-	/* Interrupt Mask Register */
-	iowrite16(INT_MASK, ioaddr + MIER);
+	/* Initialize all MAC registers */
+	r6040_init_mac_regs(dev);
 }
 
 /*
-- 
cgit v1.2.3


From 3d4634193aa95a6d04a786fc12b190d0e4295685 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 14:32:18 +0200
Subject: r6040: rework the RX buffers allocation routine

Rework the RX buffers allocation function so that we do not
leak memory in the case we could not allocate skbs for the
RX path. Propagate the errors to the r6040_up function
where we call the RX buffers allocation function.

Also rename the r6040_alloc_txbufs function to
r6040_init_txbufs, to reflect what it really does.

Signed-Off-By: Joerg Albert <jal2@gmx.de>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 53 ++++++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 44 insertions(+), 9 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 0972152e5d2..4f2ebb2e71b 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -312,7 +312,7 @@ static void r6040_rx_buf_alloc(struct r6040_private *lp, struct net_device *dev)
 	lp->rx_insert_ptr = descptr;
 }
 
-static void r6040_alloc_txbufs(struct net_device *dev)
+static void r6040_init_txbufs(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
 
@@ -322,16 +322,39 @@ static void r6040_alloc_txbufs(struct net_device *dev)
 	r6040_init_ring_desc(lp->tx_ring, lp->tx_ring_dma, TX_DCNT);
 }
 
-static void r6040_alloc_rxbufs(struct net_device *dev)
+static int r6040_alloc_rxbufs(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
-
-	lp->rx_free_desc = 0;
+	struct r6040_descriptor *desc;
+	struct sk_buff *skb;
+	int rc;
 
 	lp->rx_remove_ptr = lp->rx_insert_ptr = lp->rx_ring;
 	r6040_init_ring_desc(lp->rx_ring, lp->rx_ring_dma, RX_DCNT);
 
-	r6040_rx_buf_alloc(lp, dev);
+	/* Allocate skbs for the rx descriptors */
+	desc = lp->rx_ring;
+	do {
+		skb = netdev_alloc_skb(dev, MAX_BUF_SIZE);
+		if (!skb) {
+			printk(KERN_ERR "%s: failed to alloc skb for rx\n", dev->name);
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+		desc->skb_ptr = skb;
+		desc->buf = cpu_to_le32(pci_map_single(lp->pdev,
+						desc->skb_ptr->data,
+						MAX_BUF_SIZE, PCI_DMA_FROMDEVICE));
+		desc->status = 0x8000;
+		desc = desc->vndescp;
+	} while (desc != lp->rx_ring);
+
+	return 0;
+
+err_exit:
+	/* Deallocate all previously allocated skbs */
+	r6040_free_rxbufs(dev);
+	return rc;
 }
 
 static void r6040_init_mac_regs(struct net_device *dev)
@@ -697,14 +720,17 @@ static void r6040_poll_controller(struct net_device *dev)
 #endif
 
 /* Init RDC MAC */
-static void r6040_up(struct net_device *dev)
+static int r6040_up(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
+	int ret;
 
 	/* Initialise and alloc RX/TX buffers */
-	r6040_alloc_txbufs(dev);
-	r6040_alloc_rxbufs(dev);
+	r6040_init_txbufs(dev);
+	ret = r6040_alloc_rxbufs(dev);
+	if (ret)
+		return ret;
 
 	/* Read the PHY ID */
 	lp->switch_sig = r6040_phy_read(ioaddr, 0, 2);
@@ -734,6 +760,8 @@ static void r6040_up(struct net_device *dev)
 
 	/* Initialize all MAC registers */
 	r6040_init_mac_regs(dev);
+
+	return 0;
 }
 
 /*
@@ -812,7 +840,14 @@ static int r6040_open(struct net_device *dev)
 		return -ENOMEM;
 	}
 
-	r6040_up(dev);
+	ret = r6040_up(dev);
+	if (ret) {
+		pci_free_consistent(lp->pdev, TX_DESC_SIZE, lp->tx_ring,
+							lp->tx_ring_dma);
+		pci_free_consistent(lp->pdev, RX_DESC_SIZE, lp->rx_ring,
+							lp->rx_ring_dma);
+		return ret;
+	}
 
 	napi_enable(&lp->napi);
 	netif_start_queue(dev);
-- 
cgit v1.2.3


From f2ca60f2067958e45f949e74abd580715c6c4b33 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 7 Jul 2008 00:03:00 +0200
Subject: mv643xx_eth: fix NETPOLL build

Joseph Fannin <jfannin@gmail.com> and Takashi Iwai <tiwai@suse.de>
noticed that commit 073a345c04b01da0cc5b79ac7be0c7c8b1691ef5
("mv643xx_eth: clarify irq masking and unmasking") broke the
mv643xx_eth build when NETPOLL is enabled, due to it not renaming
one instance of INT_CAUSE_EXT in mv643xx_eth_netpoll().  This patch
takes care of that instance as well.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Cc: Dale Farnsworth <dale@farnsworth.org>
Cc: Joseph Fannin <jfannin@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/mv643xx_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 83a877f3a55..8a97a0066a8 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -2112,7 +2112,7 @@ static void mv643xx_eth_netpoll(struct net_device *dev)
 
 	mv643xx_eth_irq(dev->irq, dev);
 
-	wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_CAUSE_EXT);
+	wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT);
 }
 #endif
 
-- 
cgit v1.2.3


From 129cf9a7028fc50b226b8021bc0b76fb38efa81d Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 14:32:45 +0200
Subject: r6040: call napi_disable when puting down the interface and set
 lp->dev accordingly.

We did not call napi_disabled when putting down the interface
which should be done. Finally initialize lp->dev when everything
is set.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 4f2ebb2e71b..5eb057d3720 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -485,6 +485,7 @@ static int r6040_close(struct net_device *dev)
 	del_timer_sync(&lp->timer);
 
 	spin_lock_irq(&lp->lock);
+	napi_disable(&lp->napi);
 	netif_stop_queue(dev);
 	r6040_down(dev);
 	spin_unlock_irq(&lp->lock);
@@ -1080,8 +1081,6 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 	}
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	lp = netdev_priv(dev);
-	lp->pdev = pdev;
-	lp->dev = dev;
 
 	if (pci_request_regions(pdev, DRV_NAME)) {
 		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
@@ -1113,6 +1112,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 
 	/* Link new device into r6040_root_dev */
 	lp->pdev = pdev;
+	lp->dev = dev;
 
 	/* Init RDC private data */
 	lp->mcr0 = 0x1002;
-- 
cgit v1.2.3


From 9ca28dc4c75f018201e21b10e34b8161bcb0ffb2 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 14:33:36 +0200
Subject: r6040: completely rework the RX path

This patch completely reworks the RX path in order to be
more accurate about what is going on with the MAC.
We no longer read the error from the MLSR register instead read
the descriptor status register which reflects, the error per descriptor.
We now allocate skbs on the fly in r6040_rx, and we handle allocation
failure instead of simply dropping the packet. Remove the
rx_free_desc counter of r6040_private structure since we
allocate skbs in the RX path.

r6040_rx_buf_alloc is now removed and becomes unuseless.

Signed-Off-By: Joerg Albert <jal2@gmx.de>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 144 ++++++++++++++++++++++------------------------------
 1 file changed, 62 insertions(+), 82 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 5eb057d3720..9061ec1aa4f 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -175,7 +175,7 @@ struct r6040_private {
 	struct r6040_descriptor *tx_ring;
 	dma_addr_t rx_ring_dma;
 	dma_addr_t tx_ring_dma;
-	u16	tx_free_desc, rx_free_desc, phy_addr, phy_mode;
+	u16	tx_free_desc, phy_addr, phy_mode;
 	u16	mcr0, mcr1;
 	u16	switch_sig;
 	struct net_device *dev;
@@ -291,27 +291,6 @@ static void r6040_init_ring_desc(struct r6040_descriptor *desc_ring,
 	desc->vndescp = desc_ring;
 }
 
-/* Allocate skb buffer for rx descriptor */
-static void r6040_rx_buf_alloc(struct r6040_private *lp, struct net_device *dev)
-{
-	struct r6040_descriptor *descptr;
-
-	descptr = lp->rx_insert_ptr;
-	while (lp->rx_free_desc < RX_DCNT) {
-		descptr->skb_ptr = netdev_alloc_skb(dev, MAX_BUF_SIZE);
-
-		if (!descptr->skb_ptr)
-			break;
-		descptr->buf = cpu_to_le32(pci_map_single(lp->pdev,
-			descptr->skb_ptr->data,
-			MAX_BUF_SIZE, PCI_DMA_FROMDEVICE));
-		descptr->status = 0x8000;
-		descptr = descptr->vndescp;
-		lp->rx_free_desc++;
-	}
-	lp->rx_insert_ptr = descptr;
-}
-
 static void r6040_init_txbufs(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
@@ -556,71 +535,72 @@ static int r6040_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 static int r6040_rx(struct net_device *dev, int limit)
 {
 	struct r6040_private *priv = netdev_priv(dev);
-	int count;
-	void __iomem *ioaddr = priv->base;
+	struct r6040_descriptor *descptr = priv->rx_remove_ptr;
+	struct sk_buff *skb_ptr, *new_skb;
+	int count = 0;
 	u16 err;
 
-	for (count = 0; count < limit; ++count) {
-		struct r6040_descriptor *descptr = priv->rx_remove_ptr;
-		struct sk_buff *skb_ptr;
-
-		descptr = priv->rx_remove_ptr;
-
-		/* Check for errors */
-		err = ioread16(ioaddr + MLSR);
-		if (err & 0x0400)
-			dev->stats.rx_errors++;
-		/* RX FIFO over-run */
-		if (err & 0x8000)
-			dev->stats.rx_fifo_errors++;
-		/* RX descriptor unavailable */
-		if (err & 0x0080)
-			dev->stats.rx_frame_errors++;
-		/* Received packet with length over buffer lenght */
-		if (err & 0x0020)
-			dev->stats.rx_over_errors++;
-		/* Received packet with too long or short */
-		if (err & (0x0010 | 0x0008))
-			dev->stats.rx_length_errors++;
-		/* Received packet with CRC errors */
-		if (err & 0x0004) {
-			spin_lock(&priv->lock);
-			dev->stats.rx_crc_errors++;
-			spin_unlock(&priv->lock);
-		}
-
-		while (priv->rx_free_desc) {
-			/* No RX packet */
-			if (descptr->status & 0x8000)
-				break;
-			skb_ptr = descptr->skb_ptr;
-			if (!skb_ptr) {
-				printk(KERN_ERR "%s: Inconsistent RX"
-					"descriptor chain\n",
-					dev->name);
-				break;
+	/* Limit not reached and the descriptor belongs to the CPU */
+	while (count < limit && !(descptr->status & 0x8000)) {
+		/* Read the descriptor status */
+		err = descptr->status;
+		/* Global error status set */
+		if (err & 0x0800) {
+			/* RX dribble */
+			if (err & 0x0400)
+				dev->stats.rx_frame_errors++;
+			/* Buffer lenght exceeded */
+			if (err & 0x0200)
+				dev->stats.rx_length_errors++;
+			/* Packet too long */
+			if (err & 0x0100)
+				dev->stats.rx_length_errors++;
+			/* Packet < 64 bytes */
+			if (err & 0x0080)
+				dev->stats.rx_length_errors++;
+			/* CRC error */
+			if (err & 0x0040) {
+				spin_lock(&priv->lock);
+				dev->stats.rx_crc_errors++;
+				spin_unlock(&priv->lock);
 			}
-			descptr->skb_ptr = NULL;
-			skb_ptr->dev = priv->dev;
-			/* Do not count the CRC */
-			skb_put(skb_ptr, descptr->len - 4);
-			pci_unmap_single(priv->pdev, le32_to_cpu(descptr->buf),
-				MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
-			skb_ptr->protocol = eth_type_trans(skb_ptr, priv->dev);
-			/* Send to upper layer */
-			netif_receive_skb(skb_ptr);
-			dev->last_rx = jiffies;
-			dev->stats.rx_packets++;
-			dev->stats.rx_bytes += descptr->len;
-			/* To next descriptor */
-			descptr = descptr->vndescp;
-			priv->rx_free_desc--;
+			goto next_descr;
+		}
+		
+		/* Packet successfully received */
+		new_skb = netdev_alloc_skb(dev, MAX_BUF_SIZE);
+		if (!new_skb) {
+			dev->stats.rx_dropped++;
+			goto next_descr;
 		}
-		priv->rx_remove_ptr = descptr;
+		skb_ptr = descptr->skb_ptr;
+		skb_ptr->dev = priv->dev;
+		
+		/* Do not count the CRC */
+		skb_put(skb_ptr, descptr->len - 4);
+		pci_unmap_single(priv->pdev, le32_to_cpu(descptr->buf),
+					MAX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+		skb_ptr->protocol = eth_type_trans(skb_ptr, priv->dev);
+		
+		/* Send to upper layer */
+		netif_receive_skb(skb_ptr);
+		dev->last_rx = jiffies;
+		dev->stats.rx_packets++;
+		dev->stats.rx_bytes += descptr->len - 4;
+
+		/* put new skb into descriptor */
+		descptr->skb_ptr = new_skb;
+		descptr->buf = cpu_to_le32(pci_map_single(priv->pdev,
+						descptr->skb_ptr->data,
+					MAX_BUF_SIZE, PCI_DMA_FROMDEVICE));
+
+next_descr:
+		/* put the descriptor back to the MAC */
+		descptr->status = 0x8000;
+		descptr = descptr->vndescp;
+		count++;
 	}
-	/* Allocate new RX buffer */
-	if (priv->rx_free_desc < RX_DCNT)
-		r6040_rx_buf_alloc(priv, priv->dev);
+	priv->rx_remove_ptr = descptr;
 
 	return count;
 }
-- 
cgit v1.2.3


From 32f565df9ba451a24117db67003ed2ae21bab88c Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 14:34:15 +0200
Subject: r6040: use definitions for magic values in descriptor status

Define all the descriptor status the MAC can set.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 9061ec1aa4f..973f1e81667 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -138,6 +138,21 @@
 #define MBCR_DEFAULT	0x012A	/* MAC Bus Control Register */
 #define MCAST_MAX	4	/* Max number multicast addresses to filter */
 
+/* Descriptor status */
+#define DSC_OWNER_MAC	0x8000	/* MAC is the owner of this descriptor */
+#define DSC_RX_OK	0x4000	/* RX was successful */
+#define DSC_RX_ERR	0x0800	/* RX PHY error */
+#define DSC_RX_ERR_DRI	0x0400	/* RX dribble packet */
+#define DSC_RX_ERR_BUF	0x0200	/* RX length exceeds buffer size */
+#define DSC_RX_ERR_LONG	0x0100	/* RX length > maximum packet length */
+#define DSC_RX_ERR_RUNT	0x0080	/* RX packet length < 64 byte */
+#define DSC_RX_ERR_CRC	0x0040	/* RX CRC error */
+#define DSC_RX_BCAST	0x0020	/* RX broadcast (no error) */
+#define DSC_RX_MCAST	0x0010	/* RX multicast (no error) */
+#define DSC_RX_MCH_HIT	0x0008	/* RX multicast hit in hash table (no error) */
+#define DSC_RX_MIDH_HIT	0x0004	/* RX MID table hit (no error) */
+#define DSC_RX_IDX_MID_MASK 3	/* RX mask for the index of matched MIDx */
+
 /* PHY settings */
 #define ICPLUS_PHY_ID	0x0243
 
@@ -324,7 +339,7 @@ static int r6040_alloc_rxbufs(struct net_device *dev)
 		desc->buf = cpu_to_le32(pci_map_single(lp->pdev,
 						desc->skb_ptr->data,
 						MAX_BUF_SIZE, PCI_DMA_FROMDEVICE));
-		desc->status = 0x8000;
+		desc->status = DSC_OWNER_MAC;
 		desc = desc->vndescp;
 	} while (desc != lp->rx_ring);
 
@@ -541,25 +556,25 @@ static int r6040_rx(struct net_device *dev, int limit)
 	u16 err;
 
 	/* Limit not reached and the descriptor belongs to the CPU */
-	while (count < limit && !(descptr->status & 0x8000)) {
+	while (count < limit && !(descptr->status & DSC_OWNER_MAC)) {
 		/* Read the descriptor status */
 		err = descptr->status;
 		/* Global error status set */
-		if (err & 0x0800) {
+		if (err & DSC_RX_ERR) {
 			/* RX dribble */
-			if (err & 0x0400)
+			if (err & DSC_RX_ERR_DRI)
 				dev->stats.rx_frame_errors++;
 			/* Buffer lenght exceeded */
-			if (err & 0x0200)
+			if (err & DSC_RX_ERR_BUF)
 				dev->stats.rx_length_errors++;
 			/* Packet too long */
-			if (err & 0x0100)
+			if (err & DSC_RX_ERR_LONG)
 				dev->stats.rx_length_errors++;
 			/* Packet < 64 bytes */
-			if (err & 0x0080)
+			if (err & DSC_RX_ERR_RUNT)
 				dev->stats.rx_length_errors++;
 			/* CRC error */
-			if (err & 0x0040) {
+			if (err & DSC_RX_ERR_CRC) {
 				spin_lock(&priv->lock);
 				dev->stats.rx_crc_errors++;
 				spin_unlock(&priv->lock);
@@ -596,7 +611,7 @@ static int r6040_rx(struct net_device *dev, int limit)
 
 next_descr:
 		/* put the descriptor back to the MAC */
-		descptr->status = 0x8000;
+		descptr->status = DSC_OWNER_MAC;
 		descptr = descptr->vndescp;
 		count++;
 	}
@@ -624,7 +639,7 @@ static void r6040_tx(struct net_device *dev)
 		if (err & (0x2000 | 0x4000))
 			dev->stats.tx_carrier_errors++;
 
-		if (descptr->status & 0x8000)
+		if (descptr->status & DSC_OWNER_MAC)
 			break; /* Not complete */
 		skb_ptr = descptr->skb_ptr;
 		pci_unmap_single(priv->pdev, le32_to_cpu(descptr->buf),
@@ -874,7 +889,7 @@ static int r6040_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	descptr->skb_ptr = skb;
 	descptr->buf = cpu_to_le32(pci_map_single(lp->pdev,
 		skb->data, skb->len, PCI_DMA_TODEVICE));
-	descptr->status = 0x8000;
+	descptr->status = DSC_OWNER_MAC;
 	/* Trigger the MAC to check the TX descriptor */
 	iowrite16(0x01, ioaddr + MTPR);
 	lp->tx_insert_ptr = descptr->vndescp;
-- 
cgit v1.2.3


From 31718dedf62fd62e807001138ab5ac76e9b11064 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 14:35:00 +0200
Subject: r6040: change the default waiting time

This patch changes the default waiting time of a packet, which
along with our previous r6040_rx path, was causing huge delays
with another host (160 to 230 ms).

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 973f1e81667..b68781d3592 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -388,8 +388,8 @@ static void r6040_init_mac_regs(struct net_device *dev)
 	iowrite16(lp->rx_ring_dma >> 16, ioaddr + MRD_SA1);
 
 	/* Set interrupt waiting time and packet numbers */
-	iowrite16(0x0F06, ioaddr + MT_ICR);
-	iowrite16(0x0F06, ioaddr + MR_ICR);
+	iowrite16(0, ioaddr + MT_ICR);
+	iowrite16(0, ioaddr + MR_ICR);
 
 	/* Enable interrupts */
 	iowrite16(INT_MASK, ioaddr + MIER);
-- 
cgit v1.2.3


From e24ddf3aa8a2c4c14df1136e762c315c436488e7 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 14:35:32 +0200
Subject: r6040: handle RX fifo full and no descriptor interrupts

This patch allows the MAC to handle the RX FIFO full
and no descriptor available interrupts. While we are at it
replace the TX interrupt with its corresponding definition.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index b68781d3592..99dbe4633fc 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -163,9 +163,9 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet driver");
 
 /* RX and TX interrupts that we handle */
-#define RX_INT			(RX_FINISH)
-#define TX_INT			(TX_FINISH)
-#define INT_MASK		(RX_INT | TX_INT)
+#define RX_INTS			(RX_FIFO_FULL | RX_NO_DESC | RX_FINISH)
+#define TX_INTS			(TX_FINISH)
+#define INT_MASK		(RX_INTS | TX_INTS)
 
 struct r6040_descriptor {
 	u16	status, len;		/* 0-3 */
@@ -671,7 +671,7 @@ static int r6040_poll(struct napi_struct *napi, int budget)
 	if (work_done < budget) {
 		netif_rx_complete(dev, napi);
 		/* Enable RX interrupt */
-		iowrite16(ioread16(ioaddr + MIER) | RX_INT, ioaddr + MIER);
+		iowrite16(ioread16(ioaddr + MIER) | RX_INTS, ioaddr + MIER);
 	}
 	return work_done;
 }
@@ -693,14 +693,22 @@ static irqreturn_t r6040_interrupt(int irq, void *dev_id)
 		return IRQ_NONE;
 
 	/* RX interrupt request */
-	if (status & 0x01) {
+	if (status & RX_INTS) {
+		if (status & RX_NO_DESC) {
+			/* RX descriptor unavailable */
+			dev->stats.rx_dropped++;
+			dev->stats.rx_missed_errors++;
+		}
+		if (status & RX_FIFO_FULL)
+			dev->stats.rx_fifo_errors++;
+
 		/* Mask off RX interrupt */
-		iowrite16(ioread16(ioaddr + MIER) & ~RX_INT, ioaddr + MIER);
+		iowrite16(ioread16(ioaddr + MIER) & ~RX_INTS, ioaddr + MIER);
 		netif_rx_schedule(dev, &lp->napi);
 	}
 
 	/* TX interrupt request */
-	if (status & 0x10)
+	if (status & TX_INTS)
 		r6040_tx(dev);
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From 1de95294f16cab0e924e1b4cd9b554a6eca65e6e Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Sun, 13 Jul 2008 14:36:04 +0200
Subject: r6040: bump release number to 0.18

This patch bumps the release of the r6040 driver. There has been
quite some versions of it out there, but this one is the one
people should report bugs against.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 99dbe4633fc..1cafa92c282 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -50,8 +50,8 @@
 #include <asm/processor.h>
 
 #define DRV_NAME	"r6040"
-#define DRV_VERSION	"0.16"
-#define DRV_RELDATE	"10Nov2007"
+#define DRV_VERSION	"0.18"
+#define DRV_RELDATE	"13Jul2008"
 
 /* PHY CHIP Address */
 #define PHY1_ADDR	1	/* For MAC1 */
-- 
cgit v1.2.3


From b0e453902ad53580a77c2b1baddcc0b2d8ce8acc Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Mon, 21 Jul 2008 12:32:29 +0200
Subject: r6040: rework init_one error handling

This patch reworks the error handling in r6040_init_one
in order not to leak resources and correcly unmap and release
PCI regions of the MAC. Also prefix printk's with the driver name
for clarity.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r6040.c | 44 +++++++++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 19 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 1cafa92c282..6531ff565c5 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -1054,24 +1054,27 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 
 	err = pci_enable_device(pdev);
 	if (err)
-		return err;
+		goto err_out;
 
 	/* this should always be supported */
-	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
+	err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	if (err) {
 		printk(KERN_ERR DRV_NAME "32-bit PCI DMA addresses"
 				"not supported by the card\n");
-		return -ENODEV;
+		goto err_out;
 	}
-	if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+	err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	if (err) {
 		printk(KERN_ERR DRV_NAME "32-bit PCI DMA addresses"
 				"not supported by the card\n");
-		return -ENODEV;
+		goto err_out;
 	}
 
 	/* IO Size check */
 	if (pci_resource_len(pdev, 0) < io_size) {
-		printk(KERN_ERR "Insufficient PCI resources, aborting\n");
-		return -EIO;
+		printk(KERN_ERR DRV_NAME "Insufficient PCI resources, aborting\n");
+		err = -EIO;
+		goto err_out;
 	}
 
 	pioaddr = pci_resource_start(pdev, 0);	/* IO map base address */
@@ -1079,23 +1082,26 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 
 	dev = alloc_etherdev(sizeof(struct r6040_private));
 	if (!dev) {
-		printk(KERN_ERR "Failed to allocate etherdev\n");
-		return -ENOMEM;
+		printk(KERN_ERR DRV_NAME "Failed to allocate etherdev\n");
+		err = -ENOMEM;
+		goto err_out;
 	}
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	lp = netdev_priv(dev);
 
-	if (pci_request_regions(pdev, DRV_NAME)) {
+	err = pci_request_regions(pdev, DRV_NAME);
+
+	if (err) {
 		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
-		err = -ENODEV;
-		goto err_out_disable;
+		goto err_out_free_dev;
 	}
 
 	ioaddr = pci_iomap(pdev, bar, io_size);
 	if (!ioaddr) {
 		printk(KERN_ERR "ioremap failed for device %s\n",
 			pci_name(pdev));
-		return -EIO;
+		err = -EIO;
+		goto err_out_free_res;
 	}
 
 	/* Init system & device */
@@ -1147,17 +1153,17 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 	err = register_netdev(dev);
 	if (err) {
 		printk(KERN_ERR DRV_NAME ": Failed to register net device\n");
-		goto err_out_res;
+		goto err_out_unmap;
 	}
 	return 0;
 
-err_out_res:
+err_out_unmap:
+	pci_iounmap(pdev, ioaddr);
+err_out_free_res:
 	pci_release_regions(pdev);
-err_out_disable:
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
+err_out_free_dev:
 	free_netdev(dev);
-
+err_out:
 	return err;
 }
 
-- 
cgit v1.2.3


From 16a37acaaf4aaa631ba3f83710ed6cdb1a597520 Mon Sep 17 00:00:00 2001
From: Maciej Sosnowski <maciej.sosnowski@intel.com>
Date: Tue, 22 Jul 2008 17:30:57 -0700
Subject: I/OAT: tcp_dma_copybreak default value dependent on I/OAT version

I/OAT DMA performance tuning showed different optimal values of
tcp_dma_copybreak for different I/OAT versions (4096 for 1.2 and 2048
for 2.0).  This patch lets ioatdma driver set tcp_dma_copybreak value
according to these results.

[dan.j.williams@intel.com: remove some ifdefs]
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/ioat_dma.c |  2 ++
 drivers/dma/ioatdma.h  | 15 +++++++++++++++
 net/core/user_dma.c    |  1 +
 3 files changed, 18 insertions(+)

diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index da572968a7d..ece5a0e3a33 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1581,6 +1581,8 @@ struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_self_test;
 
+	ioat_set_tcp_copy_break(device);
+
 	dma_async_device_register(&device->common);
 
 	INIT_DELAYED_WORK(&device->work, ioat_dma_chan_watchdog);
diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h
index c6ec933f989..685adb62aa5 100644
--- a/drivers/dma/ioatdma.h
+++ b/drivers/dma/ioatdma.h
@@ -27,6 +27,7 @@
 #include <linux/dmapool.h>
 #include <linux/cache.h>
 #include <linux/pci_ids.h>
+#include <net/tcp.h>
 
 #define IOAT_DMA_VERSION  "2.18"
 
@@ -129,6 +130,20 @@ struct ioat_desc_sw {
 	struct dma_async_tx_descriptor async_tx;
 };
 
+static inline void ioat_set_tcp_copy_break(struct ioatdma_device *dev)
+{
+	#ifdef CONFIG_NET_DMA
+	switch (dev->version) {
+	case IOAT_VER_1_2:
+		sysctl_tcp_dma_copybreak = 4096;
+		break;
+	case IOAT_VER_2_0:
+		sysctl_tcp_dma_copybreak = 2048;
+		break;
+	}
+	#endif
+}
+
 #if defined(CONFIG_INTEL_IOATDMA) || defined(CONFIG_INTEL_IOATDMA_MODULE)
 struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
 				      void __iomem *iobase);
diff --git a/net/core/user_dma.c b/net/core/user_dma.c
index 0ad1cd57bc3..de760504f6f 100644
--- a/net/core/user_dma.c
+++ b/net/core/user_dma.c
@@ -34,6 +34,7 @@
 #define NET_DMA_DEFAULT_COPYBREAK 4096
 
 int sysctl_tcp_dma_copybreak = NET_DMA_DEFAULT_COPYBREAK;
+EXPORT_SYMBOL(sysctl_tcp_dma_copybreak);
 
 /**
  *	dma_skb_copy_datagram_iovec - Copy a datagram to an iovec.
-- 
cgit v1.2.3


From 7f1b358a236ee9c19657a619ac6f2dcabcaa0924 Mon Sep 17 00:00:00 2001
From: Maciej Sosnowski <maciej.sosnowski@intel.com>
Date: Tue, 22 Jul 2008 17:30:57 -0700
Subject: I/OAT: I/OAT version 3.0 support

This patch adds to ioatdma and dca modules
support for Intel I/OAT DMA engine ver.3 (aka CB3 device).
The main features of I/OAT ver.3 are:
 * 8 single channel DMA devices (8 channels total)
 * 8 DCA providers, each can accept 2 requesters
 * 8-bit TAG values and 32-bit extended APIC IDs

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dca/dca-core.c          | 131 ++++++++++++++++-----
 drivers/dca/dca-sysfs.c         |   3 +-
 drivers/dma/ioat.c              |  15 +++
 drivers/dma/ioat_dca.c          | 244 ++++++++++++++++++++++++++++++++++++++--
 drivers/dma/ioat_dma.c          |  96 ++++++++++++++--
 drivers/dma/ioatdma.h           |   5 +-
 drivers/dma/ioatdma_hw.h        |   1 +
 drivers/dma/ioatdma_registers.h |  20 ++++
 include/linux/dca.h             |   7 +-
 include/linux/pci_ids.h         |   8 ++
 10 files changed, 481 insertions(+), 49 deletions(-)

diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index bf5b92f86df..ec249d2db63 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -28,13 +28,29 @@
 #include <linux/device.h>
 #include <linux/dca.h>
 
-MODULE_LICENSE("GPL");
+#define DCA_VERSION "1.4"
 
-/* For now we're assuming a single, global, DCA provider for the system. */
+MODULE_VERSION(DCA_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Intel Corporation");
 
 static DEFINE_SPINLOCK(dca_lock);
 
-static struct dca_provider *global_dca = NULL;
+static LIST_HEAD(dca_providers);
+
+static struct dca_provider *dca_find_provider_by_dev(struct device *dev)
+{
+	struct dca_provider *dca, *ret = NULL;
+
+	list_for_each_entry(dca, &dca_providers, node) {
+		if ((!dev) || (dca->ops->dev_managed(dca, dev))) {
+			ret = dca;
+			break;
+		}
+	}
+
+	return ret;
+}
 
 /**
  * dca_add_requester - add a dca client to the list
@@ -42,25 +58,39 @@ static struct dca_provider *global_dca = NULL;
  */
 int dca_add_requester(struct device *dev)
 {
-	int err, slot;
+	struct dca_provider *dca;
+	int err, slot = -ENODEV;
 
-	if (!global_dca)
-		return -ENODEV;
+	if (!dev)
+		return -EFAULT;
 
 	spin_lock(&dca_lock);
-	slot = global_dca->ops->add_requester(global_dca, dev);
-	spin_unlock(&dca_lock);
-	if (slot < 0)
+
+	/* check if the requester has not been added already */
+	dca = dca_find_provider_by_dev(dev);
+	if (dca) {
+		spin_unlock(&dca_lock);
+		return -EEXIST;
+	}
+
+	list_for_each_entry(dca, &dca_providers, node) {
+		slot = dca->ops->add_requester(dca, dev);
+		if (slot >= 0)
+			break;
+	}
+	if (slot < 0) {
+		spin_unlock(&dca_lock);
 		return slot;
+	}
 
-	err = dca_sysfs_add_req(global_dca, dev, slot);
+	err = dca_sysfs_add_req(dca, dev, slot);
 	if (err) {
-		spin_lock(&dca_lock);
-		global_dca->ops->remove_requester(global_dca, dev);
+		dca->ops->remove_requester(dca, dev);
 		spin_unlock(&dca_lock);
 		return err;
 	}
 
+	spin_unlock(&dca_lock);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dca_add_requester);
@@ -71,30 +101,78 @@ EXPORT_SYMBOL_GPL(dca_add_requester);
  */
 int dca_remove_requester(struct device *dev)
 {
+	struct dca_provider *dca;
 	int slot;
-	if (!global_dca)
-		return -ENODEV;
+
+	if (!dev)
+		return -EFAULT;
 
 	spin_lock(&dca_lock);
-	slot = global_dca->ops->remove_requester(global_dca, dev);
-	spin_unlock(&dca_lock);
-	if (slot < 0)
+	dca = dca_find_provider_by_dev(dev);
+	if (!dca) {
+		spin_unlock(&dca_lock);
+		return -ENODEV;
+	}
+	slot = dca->ops->remove_requester(dca, dev);
+	if (slot < 0) {
+		spin_unlock(&dca_lock);
 		return slot;
+	}
 
-	dca_sysfs_remove_req(global_dca, slot);
+	dca_sysfs_remove_req(dca, slot);
+
+	spin_unlock(&dca_lock);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dca_remove_requester);
 
 /**
- * dca_get_tag - return the dca tag for the given cpu
+ * dca_common_get_tag - return the dca tag (serves both new and old api)
+ * @dev - the device that wants dca service
  * @cpu - the cpuid as returned by get_cpu()
  */
-u8 dca_get_tag(int cpu)
+u8 dca_common_get_tag(struct device *dev, int cpu)
 {
-	if (!global_dca)
+	struct dca_provider *dca;
+	u8 tag;
+
+	spin_lock(&dca_lock);
+
+	dca = dca_find_provider_by_dev(dev);
+	if (!dca) {
+		spin_unlock(&dca_lock);
 		return -ENODEV;
-	return global_dca->ops->get_tag(global_dca, cpu);
+	}
+	tag = dca->ops->get_tag(dca, dev, cpu);
+
+	spin_unlock(&dca_lock);
+	return tag;
+}
+
+/**
+ * dca3_get_tag - return the dca tag to the requester device
+ *                for the given cpu (new api)
+ * @dev - the device that wants dca service
+ * @cpu - the cpuid as returned by get_cpu()
+ */
+u8 dca3_get_tag(struct device *dev, int cpu)
+{
+	if (!dev)
+		return -EFAULT;
+
+	return dca_common_get_tag(dev, cpu);
+}
+EXPORT_SYMBOL_GPL(dca3_get_tag);
+
+/**
+ * dca_get_tag - return the dca tag for the given cpu (old api)
+ * @cpu - the cpuid as returned by get_cpu()
+ */
+u8 dca_get_tag(int cpu)
+{
+	struct device *dev = NULL;
+
+	return dca_common_get_tag(dev, cpu);
 }
 EXPORT_SYMBOL_GPL(dca_get_tag);
 
@@ -140,12 +218,10 @@ int register_dca_provider(struct dca_provider *dca, struct device *dev)
 {
 	int err;
 
-	if (global_dca)
-		return -EEXIST;
 	err = dca_sysfs_add_provider(dca, dev);
 	if (err)
 		return err;
-	global_dca = dca;
+	list_add(&dca->node, &dca_providers);
 	blocking_notifier_call_chain(&dca_provider_chain,
 				     DCA_PROVIDER_ADD, NULL);
 	return 0;
@@ -158,11 +234,9 @@ EXPORT_SYMBOL_GPL(register_dca_provider);
  */
 void unregister_dca_provider(struct dca_provider *dca)
 {
-	if (!global_dca)
-		return;
 	blocking_notifier_call_chain(&dca_provider_chain,
 				     DCA_PROVIDER_REMOVE, NULL);
-	global_dca = NULL;
+	list_del(&dca->node);
 	dca_sysfs_remove_provider(dca);
 }
 EXPORT_SYMBOL_GPL(unregister_dca_provider);
@@ -187,6 +261,7 @@ EXPORT_SYMBOL_GPL(dca_unregister_notify);
 
 static int __init dca_init(void)
 {
+	printk(KERN_ERR "dca service started, version %s\n", DCA_VERSION);
 	return dca_sysfs_init();
 }
 
diff --git a/drivers/dca/dca-sysfs.c b/drivers/dca/dca-sysfs.c
index 011328faa5f..3d47e9d8e34 100644
--- a/drivers/dca/dca-sysfs.c
+++ b/drivers/dca/dca-sysfs.c
@@ -13,9 +13,10 @@ static spinlock_t dca_idr_lock;
 int dca_sysfs_add_req(struct dca_provider *dca, struct device *dev, int slot)
 {
 	struct device *cd;
+	static int req_count;
 
 	cd = device_create(dca_class, dca->cd, MKDEV(0, slot + 1),
-			   "requester%d", slot);
+			   "requester%d", req_count++);
 	if (IS_ERR(cd))
 		return PTR_ERR(cd);
 	return 0;
diff --git a/drivers/dma/ioat.c b/drivers/dma/ioat.c
index 16e0fd8facf..9b16a3af9a0 100644
--- a/drivers/dma/ioat.c
+++ b/drivers/dma/ioat.c
@@ -47,6 +47,16 @@ static struct pci_device_id ioat_pci_tbl[] = {
 
 	/* I/OAT v2 platforms */
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB) },
+
+	/* I/OAT v3 platforms */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG6) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG7) },
 	{ 0, }
 };
 
@@ -83,6 +93,11 @@ static int ioat_setup_functionality(struct pci_dev *pdev, void __iomem *iobase)
 		if (device->dma && ioat_dca_enabled)
 			device->dca = ioat2_dca_init(pdev, iobase);
 		break;
+	case IOAT_VER_3_0:
+		device->dma = ioat_dma_probe(pdev, iobase);
+		if (device->dma && ioat_dca_enabled)
+			device->dca = ioat3_dca_init(pdev, iobase);
+		break;
 	default:
 		err = -ENODEV;
 		break;
diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c
index 9e922760b7f..6cf622da028 100644
--- a/drivers/dma/ioat_dca.c
+++ b/drivers/dma/ioat_dca.c
@@ -37,12 +37,18 @@
 #include "ioatdma_registers.h"
 
 /*
- * Bit 16 of a tag map entry is the "valid" bit, if it is set then bits 0:15
+ * Bit 7 of a tag map entry is the "valid" bit, if it is set then bits 0:6
  * contain the bit number of the APIC ID to map into the DCA tag.  If the valid
  * bit is not set, then the value must be 0 or 1 and defines the bit in the tag.
  */
 #define DCA_TAG_MAP_VALID 0x80
 
+#define DCA3_TAG_MAP_BIT_TO_INV 0x80
+#define DCA3_TAG_MAP_BIT_TO_SEL 0x40
+#define DCA3_TAG_MAP_LITERAL_VAL 0x1
+
+#define DCA_TAG_MAP_MASK 0xDF
+
 /*
  * "Legacy" DCA systems do not implement the DCA register set in the
  * I/OAT device.  Software needs direct support for their tag mappings.
@@ -95,6 +101,7 @@ struct ioat_dca_slot {
 };
 
 #define IOAT_DCA_MAX_REQ 6
+#define IOAT3_DCA_MAX_REQ 2
 
 struct ioat_dca_priv {
 	void __iomem		*iobase;
@@ -171,7 +178,9 @@ static int ioat_dca_remove_requester(struct dca_provider *dca,
 	return -ENODEV;
 }
 
-static u8 ioat_dca_get_tag(struct dca_provider *dca, int cpu)
+static u8 ioat_dca_get_tag(struct dca_provider *dca,
+			   struct device *dev,
+			   int cpu)
 {
 	struct ioat_dca_priv *ioatdca = dca_priv(dca);
 	int i, apic_id, bit, value;
@@ -193,10 +202,26 @@ static u8 ioat_dca_get_tag(struct dca_provider *dca, int cpu)
 	return tag;
 }
 
+static int ioat_dca_dev_managed(struct dca_provider *dca,
+				struct device *dev)
+{
+	struct ioat_dca_priv *ioatdca = dca_priv(dca);
+	struct pci_dev *pdev;
+	int i;
+
+	pdev = to_pci_dev(dev);
+	for (i = 0; i < ioatdca->max_requesters; i++) {
+		if (ioatdca->req_slots[i].pdev == pdev)
+			return 1;
+	}
+	return 0;
+}
+
 static struct dca_ops ioat_dca_ops = {
 	.add_requester		= ioat_dca_add_requester,
 	.remove_requester	= ioat_dca_remove_requester,
 	.get_tag		= ioat_dca_get_tag,
+	.dev_managed		= ioat_dca_dev_managed,
 };
 
 
@@ -207,6 +232,8 @@ struct dca_provider *ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase)
 	u8 *tag_map = NULL;
 	int i;
 	int err;
+	u8 version;
+	u8 max_requesters;
 
 	if (!system_has_dca_enabled(pdev))
 		return NULL;
@@ -237,15 +264,20 @@ struct dca_provider *ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase)
 	if (tag_map == NULL)
 		return NULL;
 
+	version = readb(iobase + IOAT_VER_OFFSET);
+	if (version == IOAT_VER_3_0)
+		max_requesters = IOAT3_DCA_MAX_REQ;
+	else
+		max_requesters = IOAT_DCA_MAX_REQ;
+
 	dca = alloc_dca_provider(&ioat_dca_ops,
 			sizeof(*ioatdca) +
-			(sizeof(struct ioat_dca_slot) * IOAT_DCA_MAX_REQ));
+			(sizeof(struct ioat_dca_slot) * max_requesters));
 	if (!dca)
 		return NULL;
 
 	ioatdca = dca_priv(dca);
-	ioatdca->max_requesters = IOAT_DCA_MAX_REQ;
-
+	ioatdca->max_requesters = max_requesters;
 	ioatdca->dca_base = iobase + 0x54;
 
 	/* copy over the APIC ID to DCA tag mapping */
@@ -323,11 +355,13 @@ static int ioat2_dca_remove_requester(struct dca_provider *dca,
 	return -ENODEV;
 }
 
-static u8 ioat2_dca_get_tag(struct dca_provider *dca, int cpu)
+static u8 ioat2_dca_get_tag(struct dca_provider *dca,
+			    struct device *dev,
+			    int cpu)
 {
 	u8 tag;
 
-	tag = ioat_dca_get_tag(dca, cpu);
+	tag = ioat_dca_get_tag(dca, dev, cpu);
 	tag = (~tag) & 0x1F;
 	return tag;
 }
@@ -336,6 +370,7 @@ static struct dca_ops ioat2_dca_ops = {
 	.add_requester		= ioat2_dca_add_requester,
 	.remove_requester	= ioat2_dca_remove_requester,
 	.get_tag		= ioat2_dca_get_tag,
+	.dev_managed		= ioat_dca_dev_managed,
 };
 
 static int ioat2_dca_count_dca_slots(void __iomem *iobase, u16 dca_offset)
@@ -425,3 +460,198 @@ struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase)
 
 	return dca;
 }
+
+static int ioat3_dca_add_requester(struct dca_provider *dca, struct device *dev)
+{
+	struct ioat_dca_priv *ioatdca = dca_priv(dca);
+	struct pci_dev *pdev;
+	int i;
+	u16 id;
+	u16 global_req_table;
+
+	/* This implementation only supports PCI-Express */
+	if (dev->bus != &pci_bus_type)
+		return -ENODEV;
+	pdev = to_pci_dev(dev);
+	id = dcaid_from_pcidev(pdev);
+
+	if (ioatdca->requester_count == ioatdca->max_requesters)
+		return -ENODEV;
+
+	for (i = 0; i < ioatdca->max_requesters; i++) {
+		if (ioatdca->req_slots[i].pdev == NULL) {
+			/* found an empty slot */
+			ioatdca->requester_count++;
+			ioatdca->req_slots[i].pdev = pdev;
+			ioatdca->req_slots[i].rid = id;
+			global_req_table =
+			      readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
+			writel(id | IOAT_DCA_GREQID_VALID,
+			       ioatdca->iobase + global_req_table + (i * 4));
+			return i;
+		}
+	}
+	/* Error, ioatdma->requester_count is out of whack */
+	return -EFAULT;
+}
+
+static int ioat3_dca_remove_requester(struct dca_provider *dca,
+				      struct device *dev)
+{
+	struct ioat_dca_priv *ioatdca = dca_priv(dca);
+	struct pci_dev *pdev;
+	int i;
+	u16 global_req_table;
+
+	/* This implementation only supports PCI-Express */
+	if (dev->bus != &pci_bus_type)
+		return -ENODEV;
+	pdev = to_pci_dev(dev);
+
+	for (i = 0; i < ioatdca->max_requesters; i++) {
+		if (ioatdca->req_slots[i].pdev == pdev) {
+			global_req_table =
+			      readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
+			writel(0, ioatdca->iobase + global_req_table + (i * 4));
+			ioatdca->req_slots[i].pdev = NULL;
+			ioatdca->req_slots[i].rid = 0;
+			ioatdca->requester_count--;
+			return i;
+		}
+	}
+	return -ENODEV;
+}
+
+static u8 ioat3_dca_get_tag(struct dca_provider *dca,
+			    struct device *dev,
+			    int cpu)
+{
+	u8 tag;
+
+	struct ioat_dca_priv *ioatdca = dca_priv(dca);
+	int i, apic_id, bit, value;
+	u8 entry;
+
+	tag = 0;
+	apic_id = cpu_physical_id(cpu);
+
+	for (i = 0; i < IOAT_TAG_MAP_LEN; i++) {
+		entry = ioatdca->tag_map[i];
+		if (entry & DCA3_TAG_MAP_BIT_TO_SEL) {
+			bit = entry &
+				~(DCA3_TAG_MAP_BIT_TO_SEL | DCA3_TAG_MAP_BIT_TO_INV);
+			value = (apic_id & (1 << bit)) ? 1 : 0;
+		} else if (entry & DCA3_TAG_MAP_BIT_TO_INV) {
+			bit = entry & ~DCA3_TAG_MAP_BIT_TO_INV;
+			value = (apic_id & (1 << bit)) ? 0 : 1;
+		} else {
+			value = (entry & DCA3_TAG_MAP_LITERAL_VAL) ? 1 : 0;
+		}
+		tag |= (value << i);
+	}
+
+	return tag;
+}
+
+static struct dca_ops ioat3_dca_ops = {
+	.add_requester		= ioat3_dca_add_requester,
+	.remove_requester	= ioat3_dca_remove_requester,
+	.get_tag		= ioat3_dca_get_tag,
+	.dev_managed		= ioat_dca_dev_managed,
+};
+
+static int ioat3_dca_count_dca_slots(void *iobase, u16 dca_offset)
+{
+	int slots = 0;
+	u32 req;
+	u16 global_req_table;
+
+	global_req_table = readw(iobase + dca_offset + IOAT3_DCA_GREQID_OFFSET);
+	if (global_req_table == 0)
+		return 0;
+
+	do {
+		req = readl(iobase + global_req_table + (slots * sizeof(u32)));
+		slots++;
+	} while ((req & IOAT_DCA_GREQID_LASTID) == 0);
+
+	return slots;
+}
+
+struct dca_provider *ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase)
+{
+	struct dca_provider *dca;
+	struct ioat_dca_priv *ioatdca;
+	int slots;
+	int i;
+	int err;
+	u16 dca_offset;
+	u16 csi_fsb_control;
+	u16 pcie_control;
+	u8 bit;
+
+	union {
+		u64 full;
+		struct {
+			u32 low;
+			u32 high;
+		};
+	} tag_map;
+
+	if (!system_has_dca_enabled(pdev))
+		return NULL;
+
+	dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
+	if (dca_offset == 0)
+		return NULL;
+
+	slots = ioat3_dca_count_dca_slots(iobase, dca_offset);
+	if (slots == 0)
+		return NULL;
+
+	dca = alloc_dca_provider(&ioat3_dca_ops,
+				 sizeof(*ioatdca)
+				      + (sizeof(struct ioat_dca_slot) * slots));
+	if (!dca)
+		return NULL;
+
+	ioatdca = dca_priv(dca);
+	ioatdca->iobase = iobase;
+	ioatdca->dca_base = iobase + dca_offset;
+	ioatdca->max_requesters = slots;
+
+	/* some bios might not know to turn these on */
+	csi_fsb_control = readw(ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
+	if ((csi_fsb_control & IOAT3_CSI_CONTROL_PREFETCH) == 0) {
+		csi_fsb_control |= IOAT3_CSI_CONTROL_PREFETCH;
+		writew(csi_fsb_control,
+		       ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
+	}
+	pcie_control = readw(ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
+	if ((pcie_control & IOAT3_PCI_CONTROL_MEMWR) == 0) {
+		pcie_control |= IOAT3_PCI_CONTROL_MEMWR;
+		writew(pcie_control,
+		       ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
+	}
+
+
+	/* TODO version, compatibility and configuration checks */
+
+	/* copy out the APIC to DCA tag map */
+	tag_map.low =
+		readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_LOW);
+	tag_map.high =
+		readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_HIGH);
+	for (i = 0; i < 8; i++) {
+		bit = tag_map.full >> (8 * i);
+		ioatdca->tag_map[i] = bit & DCA_TAG_MAP_MASK;
+	}
+
+	err = register_dca_provider(dca, &pdev->dev);
+	if (err) {
+		free_dca_provider(dca);
+		return NULL;
+	}
+
+	return dca;
+}
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index ece5a0e3a33..a52156e5688 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -53,6 +53,12 @@ MODULE_PARM_DESC(ioat_pending_level,
 static void ioat_dma_chan_reset_part2(struct work_struct *work);
 static void ioat_dma_chan_watchdog(struct work_struct *work);
 
+/*
+ * workaround for IOAT ver.3.0 null descriptor issue
+ * (channel returns error when size is 0)
+ */
+#define NULL_DESC_BUFFER_SIZE 1
+
 /* internal functions */
 static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan);
 static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan);
@@ -129,6 +135,38 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device)
 	int i;
 	struct ioat_dma_chan *ioat_chan;
 
+	/*
+	 * IOAT ver.3 workarounds
+	 */
+	if (device->version == IOAT_VER_3_0) {
+		u32 chan_err_mask;
+		u16 dev_id;
+		u32 dmauncerrsts;
+
+		/*
+		 * Write CHANERRMSK_INT with 3E07h to mask out the errors
+		 * that can cause stability issues for IOAT ver.3
+		 */
+		chan_err_mask = 0x3E07;
+		pci_write_config_dword(device->pdev,
+			IOAT_PCI_CHANERRMASK_INT_OFFSET,
+			chan_err_mask);
+
+		/*
+		 * Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit
+		 * (workaround for spurious config parity error after restart)
+		 */
+		pci_read_config_word(device->pdev,
+			IOAT_PCI_DEVICE_ID_OFFSET,
+			&dev_id);
+		if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) {
+			dmauncerrsts = 0x10;
+			pci_write_config_dword(device->pdev,
+				IOAT_PCI_DMAUNCERRSTS_OFFSET,
+				dmauncerrsts);
+		}
+	}
+
 	device->common.chancnt = readb(device->reg_base + IOAT_CHANCNT_OFFSET);
 	xfercap_scale = readb(device->reg_base + IOAT_XFERCAP_OFFSET);
 	xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
@@ -473,6 +511,13 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
 		prev = new;
 	} while (len && (new = ioat1_dma_get_next_descriptor(ioat_chan)));
 
+	if (!new) {
+		dev_err(&ioat_chan->device->pdev->dev,
+			"tx submit failed\n");
+		spin_unlock_bh(&ioat_chan->desc_lock);
+		return -ENOMEM;
+	}
+
 	hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
 	if (new->async_tx.callback) {
 		hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
@@ -558,7 +603,14 @@ static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx)
 		desc_count++;
 	} while (len && (new = ioat2_dma_get_next_descriptor(ioat_chan)));
 
-	hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
+	if (!new) {
+		dev_err(&ioat_chan->device->pdev->dev,
+			"tx submit failed\n");
+		spin_unlock_bh(&ioat_chan->desc_lock);
+		return -ENOMEM;
+	}
+
+	hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
 	if (new->async_tx.callback) {
 		hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
 		if (first != new) {
@@ -629,6 +681,7 @@ static struct ioat_desc_sw *ioat_dma_alloc_descriptor(
 		desc_sw->async_tx.tx_submit = ioat1_tx_submit;
 		break;
 	case IOAT_VER_2_0:
+	case IOAT_VER_3_0:
 		desc_sw->async_tx.tx_submit = ioat2_tx_submit;
 		break;
 	}
@@ -779,6 +832,7 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan)
 		}
 		break;
 	case IOAT_VER_2_0:
+	case IOAT_VER_3_0:
 		list_for_each_entry_safe(desc, _desc,
 					 ioat_chan->free_desc.next, node) {
 			list_del(&desc->node);
@@ -868,7 +922,8 @@ ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
 
 		/* set up the noop descriptor */
 		noop_desc = to_ioat_desc(ioat_chan->used_desc.next);
-		noop_desc->hw->size = 0;
+		/* set size to non-zero value (channel returns error when size is 0) */
+		noop_desc->hw->size = NULL_DESC_BUFFER_SIZE;
 		noop_desc->hw->ctl = IOAT_DMA_DESCRIPTOR_NUL;
 		noop_desc->hw->src_addr = 0;
 		noop_desc->hw->dst_addr = 0;
@@ -918,6 +973,7 @@ static struct ioat_desc_sw *ioat_dma_get_next_descriptor(
 		return ioat1_dma_get_next_descriptor(ioat_chan);
 		break;
 	case IOAT_VER_2_0:
+	case IOAT_VER_3_0:
 		return ioat2_dma_get_next_descriptor(ioat_chan);
 		break;
 	}
@@ -1061,10 +1117,12 @@ static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan)
 		 * perhaps we're stuck so hard that the watchdog can't go off?
 		 * try to catch it after 2 seconds
 		 */
-		if (time_after(jiffies,
-			       ioat_chan->last_completion_time + HZ*WATCHDOG_DELAY)) {
-			ioat_dma_chan_watchdog(&(ioat_chan->device->work.work));
-			ioat_chan->last_completion_time = jiffies;
+		if (ioat_chan->device->version != IOAT_VER_3_0) {
+			if (time_after(jiffies,
+				       ioat_chan->last_completion_time + HZ*WATCHDOG_DELAY)) {
+				ioat_dma_chan_watchdog(&(ioat_chan->device->work.work));
+				ioat_chan->last_completion_time = jiffies;
+			}
 		}
 		return;
 	}
@@ -1120,6 +1178,7 @@ static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan)
 		}
 		break;
 	case IOAT_VER_2_0:
+	case IOAT_VER_3_0:
 		/* has some other thread has already cleaned up? */
 		if (ioat_chan->used_desc.prev == NULL)
 			break;
@@ -1223,10 +1282,19 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan)
 	spin_lock_bh(&ioat_chan->desc_lock);
 
 	desc = ioat_dma_get_next_descriptor(ioat_chan);
+
+	if (!desc) {
+		dev_err(&ioat_chan->device->pdev->dev,
+			"Unable to start null desc - get next desc failed\n");
+		spin_unlock_bh(&ioat_chan->desc_lock);
+		return;
+	}
+
 	desc->hw->ctl = IOAT_DMA_DESCRIPTOR_NUL
 				| IOAT_DMA_DESCRIPTOR_CTL_INT_GN
 				| IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
-	desc->hw->size = 0;
+	/* set size to non-zero value (channel returns error when size is 0) */
+	desc->hw->size = NULL_DESC_BUFFER_SIZE;
 	desc->hw->src_addr = 0;
 	desc->hw->dst_addr = 0;
 	async_tx_ack(&desc->async_tx);
@@ -1244,6 +1312,7 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan)
 			+ IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
 		break;
 	case IOAT_VER_2_0:
+	case IOAT_VER_3_0:
 		writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
 		       ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_LOW);
 		writel(((u64) desc->async_tx.phys) >> 32,
@@ -1562,6 +1631,7 @@ struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
 						ioat1_dma_memcpy_issue_pending;
 		break;
 	case IOAT_VER_2_0:
+	case IOAT_VER_3_0:
 		device->common.device_prep_dma_memcpy = ioat2_dma_prep_memcpy;
 		device->common.device_issue_pending =
 						ioat2_dma_memcpy_issue_pending;
@@ -1585,9 +1655,11 @@ struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
 
 	dma_async_device_register(&device->common);
 
-	INIT_DELAYED_WORK(&device->work, ioat_dma_chan_watchdog);
-	schedule_delayed_work(&device->work,
-			      WATCHDOG_DELAY);
+	if (device->version != IOAT_VER_3_0) {
+		INIT_DELAYED_WORK(&device->work, ioat_dma_chan_watchdog);
+		schedule_delayed_work(&device->work,
+				      WATCHDOG_DELAY);
+	}
 
 	return device;
 
@@ -1621,7 +1693,9 @@ void ioat_dma_remove(struct ioatdma_device *device)
 	pci_release_regions(device->pdev);
 	pci_disable_device(device->pdev);
 
-	cancel_delayed_work(&device->work);
+	if (device->version != IOAT_VER_3_0) {
+		cancel_delayed_work(&device->work);
+	}
 
 	list_for_each_entry_safe(chan, _chan,
 				 &device->common.channels, device_node) {
diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h
index 685adb62aa5..a3306d0e137 100644
--- a/drivers/dma/ioatdma.h
+++ b/drivers/dma/ioatdma.h
@@ -29,7 +29,7 @@
 #include <linux/pci_ids.h>
 #include <net/tcp.h>
 
-#define IOAT_DMA_VERSION  "2.18"
+#define IOAT_DMA_VERSION  "3.30"
 
 enum ioat_interrupt {
 	none = 0,
@@ -135,6 +135,7 @@ static inline void ioat_set_tcp_copy_break(struct ioatdma_device *dev)
 	#ifdef CONFIG_NET_DMA
 	switch (dev->version) {
 	case IOAT_VER_1_2:
+	case IOAT_VER_3_0:
 		sysctl_tcp_dma_copybreak = 4096;
 		break;
 	case IOAT_VER_2_0:
@@ -150,11 +151,13 @@ struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
 void ioat_dma_remove(struct ioatdma_device *device);
 struct dca_provider *ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase);
 struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase);
+struct dca_provider *ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase);
 #else
 #define ioat_dma_probe(pdev, iobase)    NULL
 #define ioat_dma_remove(device)         do { } while (0)
 #define ioat_dca_init(pdev, iobase)	NULL
 #define ioat2_dca_init(pdev, iobase)	NULL
+#define ioat3_dca_init(pdev, iobase)	NULL
 #endif
 
 #endif /* IOATDMA_H */
diff --git a/drivers/dma/ioatdma_hw.h b/drivers/dma/ioatdma_hw.h
index dd470fa91d8..f1ae2c776f7 100644
--- a/drivers/dma/ioatdma_hw.h
+++ b/drivers/dma/ioatdma_hw.h
@@ -35,6 +35,7 @@
 #define IOAT_PCI_SID            0x8086
 #define IOAT_VER_1_2            0x12    /* Version 1.2 */
 #define IOAT_VER_2_0            0x20    /* Version 2.0 */
+#define IOAT_VER_3_0            0x30    /* Version 3.0 */
 
 struct ioat_dma_descriptor {
 	uint32_t	size;
diff --git a/drivers/dma/ioatdma_registers.h b/drivers/dma/ioatdma_registers.h
index 9832d7ebd93..827cb503cac 100644
--- a/drivers/dma/ioatdma_registers.h
+++ b/drivers/dma/ioatdma_registers.h
@@ -25,6 +25,10 @@
 #define IOAT_PCI_DMACTRL_DMA_EN			0x00000001
 #define IOAT_PCI_DMACTRL_MSI_EN			0x00000002
 
+#define IOAT_PCI_DEVICE_ID_OFFSET		0x02
+#define IOAT_PCI_DMAUNCERRSTS_OFFSET		0x148
+#define IOAT_PCI_CHANERRMASK_INT_OFFSET		0x184
+
 /* MMIO Device Registers */
 #define IOAT_CHANCNT_OFFSET			0x00	/*  8-bit */
 
@@ -149,7 +153,23 @@
 #define IOAT_DCA_GREQID_VALID       0x20000000
 #define IOAT_DCA_GREQID_LASTID      0x80000000
 
+#define IOAT3_CSI_CAPABILITY_OFFSET 0x08
+#define IOAT3_CSI_CAPABILITY_PREFETCH    0x1
+
+#define IOAT3_PCI_CAPABILITY_OFFSET 0x0A
+#define IOAT3_PCI_CAPABILITY_MEMWR  0x1
+
+#define IOAT3_CSI_CONTROL_OFFSET    0x0C
+#define IOAT3_CSI_CONTROL_PREFETCH  0x1
+
+#define IOAT3_PCI_CONTROL_OFFSET    0x0E
+#define IOAT3_PCI_CONTROL_MEMWR     0x1
+
+#define IOAT3_APICID_TAG_MAP_OFFSET 0x10
+#define IOAT3_APICID_TAG_MAP_OFFSET_LOW  0x10
+#define IOAT3_APICID_TAG_MAP_OFFSET_HIGH 0x14
 
+#define IOAT3_DCA_GREQID_OFFSET     0x02
 
 #define IOAT1_CHAINADDR_OFFSET		0x0C	/* 64-bit Descriptor Chain Address Register */
 #define IOAT2_CHAINADDR_OFFSET		0x10	/* 64-bit Descriptor Chain Address Register */
diff --git a/include/linux/dca.h b/include/linux/dca.h
index af61cd1f37e..b00a753eda5 100644
--- a/include/linux/dca.h
+++ b/include/linux/dca.h
@@ -10,6 +10,7 @@ void dca_unregister_notify(struct notifier_block *nb);
 #define DCA_PROVIDER_REMOVE  0x0002
 
 struct dca_provider {
+	struct list_head	node;
 	struct dca_ops		*ops;
 	struct device 		*cd;
 	int			 id;
@@ -18,7 +19,9 @@ struct dca_provider {
 struct dca_ops {
 	int	(*add_requester)    (struct dca_provider *, struct device *);
 	int	(*remove_requester) (struct dca_provider *, struct device *);
-	u8	(*get_tag)	    (struct dca_provider *, int cpu);
+	u8	(*get_tag)	    (struct dca_provider *, struct device *,
+				     int cpu);
+	int	(*dev_managed)      (struct dca_provider *, struct device *);
 };
 
 struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size);
@@ -32,9 +35,11 @@ static inline void *dca_priv(struct dca_provider *dca)
 }
 
 /* Requester API */
+#define DCA_GET_TAG_TWO_ARGS
 int dca_add_requester(struct device *dev);
 int dca_remove_requester(struct device *dev);
 u8 dca_get_tag(int cpu);
+u8 dca3_get_tag(struct device *dev, int cpu);
 
 /* internal stuff */
 int __init dca_sysfs_init(void);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9b940e64417..06a5b7ae79b 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2363,6 +2363,14 @@
 #define PCI_DEVICE_ID_INTEL_ICH9_7	0x2916
 #define PCI_DEVICE_ID_INTEL_ICH9_8	0x2918
 #define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG4	0x3429
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG5	0x342a
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG6	0x342b
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG7	0x342c
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG0	0x3430
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG1	0x3431
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG2	0x3432
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG3	0x3433
 #define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
 #define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
 #define PCI_DEVICE_ID_INTEL_82855GM_HB	0x3580
-- 
cgit v1.2.3


From d6f8aa8586dabe605454f3c98a5c1a577c3e0cfb Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Tue, 22 Jul 2008 21:17:38 -0400
Subject: [netdrvr] atl1d: fix !CONFIG_PM build

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/atl1e/atl1e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 367c7275063..35264c244cf 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -2073,7 +2073,6 @@ static int atl1e_close(struct net_device *netdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
 static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
@@ -2207,6 +2206,7 @@ suspend_exit:
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int atl1e_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
-- 
cgit v1.2.3


From 4255589293b78c4dab324323e12857876b154863 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 22 Jul 2008 18:29:10 -0700
Subject: netxen: Needs to include linux/vmalloc.h

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index ac710c30d3f..8e736614407 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -54,6 +54,7 @@
 
 #include <linux/mm.h>
 #include <linux/mman.h>
+#include <linux/vmalloc.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
-- 
cgit v1.2.3


From 521c4d96e0840ecce25b956e00f416ed499ef2ba Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 22 Jul 2008 18:32:47 -0700
Subject: ipw2200: Call netif_*_queue() interfaces properly.

netif_carrier_{on,off}() handles starting and stopping packet
flow into the driver.  So there is no reason to invoke netif_stop_queue()
and netif_wake_queue() in response to link status events.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wireless/ipw2200.c | 33 ++-------------------------------
 1 file changed, 2 insertions(+), 31 deletions(-)

diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 6e704608947..1acfbcd3703 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -4972,8 +4972,7 @@ static int ipw_queue_tx_reclaim(struct ipw_priv *priv,
 	}
       done:
 	if ((ipw_tx_queue_space(q) > q->low_mark) &&
-	    (qindex >= 0) &&
-	    (priv->status & STATUS_ASSOCIATED) && netif_running(priv->net_dev))
+	    (qindex >= 0))
 		netif_wake_queue(priv->net_dev);
 	used = q->first_empty - q->last_used;
 	if (used < 0)
@@ -10154,14 +10153,8 @@ static  void init_sys_config(struct ipw_sys_config *sys_config)
 
 static int ipw_net_open(struct net_device *dev)
 {
-	struct ipw_priv *priv = ieee80211_priv(dev);
 	IPW_DEBUG_INFO("dev->open\n");
-	/* we should be verifying the device is ready to be opened */
-	mutex_lock(&priv->mutex);
-	if (!(priv->status & STATUS_RF_KILL_MASK) &&
-	    (priv->status & STATUS_ASSOCIATED))
-		netif_start_queue(dev);
-	mutex_unlock(&priv->mutex);
+	netif_start_queue(dev);
 	return 0;
 }
 
@@ -10481,13 +10474,6 @@ static int ipw_net_hard_start_xmit(struct ieee80211_txb *txb,
 	IPW_DEBUG_TX("dev->xmit(%d bytes)\n", txb->payload_size);
 	spin_lock_irqsave(&priv->lock, flags);
 
-	if (!(priv->status & STATUS_ASSOCIATED)) {
-		IPW_DEBUG_INFO("Tx attempt while not associated.\n");
-		priv->ieee->stats.tx_carrier_errors++;
-		netif_stop_queue(dev);
-		goto fail_unlock;
-	}
-
 #ifdef CONFIG_IPW2200_PROMISCUOUS
 	if (rtap_iface && netif_running(priv->prom_net_dev))
 		ipw_handle_promiscuous_tx(priv, txb);
@@ -10499,10 +10485,6 @@ static int ipw_net_hard_start_xmit(struct ieee80211_txb *txb,
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return ret;
-
-      fail_unlock:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return 1;
 }
 
 static struct net_device_stats *ipw_net_get_stats(struct net_device *dev)
@@ -10703,13 +10685,6 @@ static void ipw_link_up(struct ipw_priv *priv)
 	priv->last_packet_time = 0;
 
 	netif_carrier_on(priv->net_dev);
-	if (netif_queue_stopped(priv->net_dev)) {
-		IPW_DEBUG_NOTIF("waking queue\n");
-		netif_wake_queue(priv->net_dev);
-	} else {
-		IPW_DEBUG_NOTIF("starting queue\n");
-		netif_start_queue(priv->net_dev);
-	}
 
 	cancel_delayed_work(&priv->request_scan);
 	cancel_delayed_work(&priv->request_direct_scan);
@@ -10739,7 +10714,6 @@ static void ipw_link_down(struct ipw_priv *priv)
 {
 	ipw_led_link_down(priv);
 	netif_carrier_off(priv->net_dev);
-	netif_stop_queue(priv->net_dev);
 	notify_wx_assoc_event(priv);
 
 	/* Cancel any queued work ... */
@@ -11419,7 +11393,6 @@ static void ipw_down(struct ipw_priv *priv)
 	/* Clear all bits but the RF Kill */
 	priv->status &= STATUS_RF_KILL_MASK | STATUS_EXIT_PENDING;
 	netif_carrier_off(priv->net_dev);
-	netif_stop_queue(priv->net_dev);
 
 	ipw_stop_nic(priv);
 
@@ -11522,7 +11495,6 @@ static int ipw_prom_open(struct net_device *dev)
 
 	IPW_DEBUG_INFO("prom dev->open\n");
 	netif_carrier_off(dev);
-	netif_stop_queue(dev);
 
 	if (priv->ieee->iw_mode != IW_MODE_MONITOR) {
 		priv->sys_config.accept_all_data_frames = 1;
@@ -11558,7 +11530,6 @@ static int ipw_prom_stop(struct net_device *dev)
 static int ipw_prom_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	IPW_DEBUG_INFO("prom dev->xmit\n");
-	netif_stop_queue(dev);
 	return -EOPNOTSUPP;
 }
 
-- 
cgit v1.2.3


From 6069fb2ef5d4f47432359c97f350e0cfcc4d208e Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 22 Jul 2008 19:06:00 -0700
Subject: Re-delete zombie 'drivers/usb/serial/airprime.c' file

Stephen Rothwell points out that this file got deleted (on purpose) by
commit 640c1bce86d1e11ee6a1263fdf6170d3210b1684 ("USB: delete airprime
driver"), but then almost immediately incorrectly resurrected by commit
95da310e66ee8090119596c70ca8432e57f9a97f ("usb_serial: API all change").

Delete it again.  If it comes back, we'll need to drive a stake through
its heart.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/airprime.c | 355 ------------------------------------------
 1 file changed, 355 deletions(-)
 delete mode 100644 drivers/usb/serial/airprime.c

diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
deleted file mode 100644
index b3f1d1e8246..00000000000
--- a/drivers/usb/serial/airprime.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * AirPrime CDMA Wireless Serial USB driver
- *
- * Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-static struct usb_device_id id_table [] = {
-	{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
-	{ },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-#define URB_TRANSFER_BUFFER_SIZE	4096
-#define NUM_READ_URBS			4
-#define NUM_WRITE_URBS			4
-#define NUM_BULK_EPS			3
-#define MAX_BULK_EPS			6
-
-/* if overridden by the user, then use their value for the size of the
- * read and write urbs, and the number of endpoints */
-static int buffer_size = URB_TRANSFER_BUFFER_SIZE;
-static int endpoints = NUM_BULK_EPS;
-static int debug;
-struct airprime_private {
-	spinlock_t lock;
-	int outstanding_urbs;
-	int throttled;
-	struct urb *read_urbp[NUM_READ_URBS];
-
-	/* Settings for the port */
-	int rts_state;	/* Handshaking pins (outputs) */
-	int dtr_state;
-	int cts_state;	/* Handshaking pins (inputs) */
-	int dsr_state;
-	int dcd_state;
-	int ri_state;
-};
-
-static int airprime_send_setup(struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-	struct airprime_private *priv;
-
-	dbg("%s", __func__);
-
-	if (port->number != 0)
-		return 0;
-
-	priv = usb_get_serial_port_data(port);
-
-	if (port->port.tty) {
-		int val = 0;
-		if (priv->dtr_state)
-			val |= 0x01;
-		if (priv->rts_state)
-			val |= 0x02;
-
-		return usb_control_msg(serial->dev,
-					usb_rcvctrlpipe(serial->dev, 0),
-					0x22, 0x21, val, 0, NULL, 0,
-					USB_CTRL_SET_TIMEOUT);
-	}
-
-	return 0;
-}
-
-static void airprime_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	unsigned char *data = urb->transfer_buffer;
-	struct tty_struct *tty;
-	int result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-
-	tty = port->port.tty;
-	if (tty && urb->actual_length) {
-		tty_insert_flip_string(tty, data, urb->actual_length);
-		tty_flip_buffer_push(tty);
-	}
-
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, result);
-	return;
-}
-
-static void airprime_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct airprime_private *priv = usb_get_serial_port_data(port);
-	int status = urb->status;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/* free up the transfer buffer, as usb_free_urb() does not do this */
-	kfree(urb->transfer_buffer);
-
-	if (status)
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-	spin_lock_irqsave(&priv->lock, flags);
-	--priv->outstanding_urbs;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	usb_serial_port_softint(port);
-}
-
-static int airprime_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
-{
-	struct airprime_private *priv = usb_get_serial_port_data(port);
-	struct usb_serial *serial = port->serial;
-	struct urb *urb;
-	char *buffer = NULL;
-	int i;
-	int result = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/* initialize our private data structure if it isn't already created */
-	if (!priv) {
-		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-		if (!priv) {
-			result = -ENOMEM;
-			goto out;
-		}
-		spin_lock_init(&priv->lock);
-		usb_set_serial_port_data(port, priv);
-	}
-
-	/* Set some sane defaults */
-	priv->rts_state = 1;
-	priv->dtr_state = 1;
-
-	for (i = 0; i < NUM_READ_URBS; ++i) {
-		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(&port->dev, "%s - out of memory.\n",
-				__func__);
-			result = -ENOMEM;
-			goto errout;
-		}
-		urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!urb) {
-			kfree(buffer);
-			dev_err(&port->dev, "%s - no more urbs?\n",
-				__func__);
-			result = -ENOMEM;
-			goto errout;
-		}
-		usb_fill_bulk_urb(urb, serial->dev,
-				  usb_rcvbulkpipe(serial->dev,
-					  port->bulk_out_endpointAddress),
-				  buffer, buffer_size,
-				  airprime_read_bulk_callback, port);
-		result = usb_submit_urb(urb, GFP_KERNEL);
-		if (result) {
-			usb_free_urb(urb);
-			kfree(buffer);
-			dev_err(&port->dev,
-				"%s - failed submitting read urb %d for port %d, error %d\n",
-				__func__, i, port->number, result);
-			goto errout;
-		}
-		/* remember this urb so we can kill it when the
-		   port is closed */
-		priv->read_urbp[i] = urb;
-	}
-
-	airprime_send_setup(port);
-
-	goto out;
-
- errout:
-	/* some error happened, cancel any submitted urbs and clean up
-	   anything that got allocated successfully */
-
-	while (i-- != 0) {
-		urb = priv->read_urbp[i];
-		buffer = urb->transfer_buffer;
-		usb_kill_urb(urb);
-		usb_free_urb(urb);
-		kfree(buffer);
-	}
-
- out:
-	return result;
-}
-
-static void airprime_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
-{
-	struct airprime_private *priv = usb_get_serial_port_data(port);
-	int i;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	priv->rts_state = 0;
-	priv->dtr_state = 0;
-
-	mutex_lock(&port->serial->disc_mutex);
-	if (!port->serial->disconnected)
-		airprime_send_setup(port);
-	mutex_unlock(&port->serial->disc_mutex);
-
-	for (i = 0; i < NUM_READ_URBS; ++i) {
-		usb_kill_urb(priv->read_urbp[i]);
-		kfree(priv->read_urbp[i]->transfer_buffer);
-		usb_free_urb(priv->read_urbp[i]);
-	}
-
-	/* free up private structure */
-	kfree(priv);
-	usb_set_serial_port_data(port, NULL);
-}
-
-static int airprime_write(struct tty_struct *tty, struct usb_serial_port *port,
-			  const unsigned char *buf, int count)
-{
-	struct airprime_private *priv = usb_get_serial_port_data(port);
-	struct usb_serial *serial = port->serial;
-	struct urb *urb;
-	unsigned char *buffer;
-	unsigned long flags;
-	int status;
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->outstanding_urbs > NUM_WRITE_URBS) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
-		return 0;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-	buffer = kmalloc(count, GFP_ATOMIC);
-	if (!buffer) {
-		dev_err(&port->dev, "out of memory\n");
-		return -ENOMEM;
-	}
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		dev_err(&port->dev, "no more free urbs\n");
-		kfree(buffer);
-		return -ENOMEM;
-	}
-	memcpy(buffer, buf, count);
-
-	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
-
-	usb_fill_bulk_urb(urb, serial->dev,
-			  usb_sndbulkpipe(serial->dev,
-					  port->bulk_out_endpointAddress),
-			  buffer, count,
-			  airprime_write_bulk_callback, port);
-
-	/* send it down the pipe */
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status) {
-		dev_err(&port->dev,
-			"%s - usb_submit_urb(write bulk) failed with status = %d\n",
-			__func__, status);
-		count = status;
-		kfree(buffer);
-	} else {
-		spin_lock_irqsave(&priv->lock, flags);
-		++priv->outstanding_urbs;
-		spin_unlock_irqrestore(&priv->lock, flags);
-	}
-	/* we are done with this urb, so let the host driver
-	 * really free it when it is finished with it */
-	usb_free_urb(urb);
-	return count;
-}
-
-static struct usb_driver airprime_driver = {
-	.name =		"airprime",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-	.no_dynamic_id =	1,
-};
-
-static struct usb_serial_driver airprime_device = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"airprime",
-	},
-	.usb_driver =		&airprime_driver,
-	.id_table =		id_table,
-	.open =			airprime_open,
-	.close =		airprime_close,
-	.write =		airprime_write,
-};
-
-static int __init airprime_init(void)
-{
-	int retval;
-
-	airprime_device.num_ports = endpoints;
-	if (endpoints < 0 || endpoints >= MAX_BULK_EPS)
-		airprime_device.num_ports = NUM_BULK_EPS;
-
-	retval = usb_serial_register(&airprime_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&airprime_driver);
-	if (retval)
-		usb_serial_deregister(&airprime_device);
-	return retval;
-}
-
-static void __exit airprime_exit(void)
-{
-	dbg("%s", __func__);
-
-	usb_deregister(&airprime_driver);
-	usb_serial_deregister(&airprime_device);
-}
-
-module_init(airprime_init);
-module_exit(airprime_exit);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled");
-module_param(buffer_size, int, 0);
-MODULE_PARM_DESC(buffer_size,
-		"Size of the transfer buffers in bytes (default 4096)");
-module_param(endpoints, int, 0);
-MODULE_PARM_DESC(endpoints, "Number of bulk EPs to configure (default 3)");
-- 
cgit v1.2.3


From 1bad879a078111748ebc27fb0d29e8c916556835 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 22 Jul 2008 23:38:04 +0100
Subject: tty: Fix up escaped character

Louis Rilling noticed this.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tty_io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 15e597d0300..fa48dba5ba5 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -915,7 +915,7 @@ static void tty_reset_termios(struct tty_struct *tty)
  *	do_tty_hangup		-	actual handler for hangup events
  *	@work: tty device
  *
-k *	This can be called by the "eventd" kernel thread.  That is process
+ *	This can be called by the "eventd" kernel thread.  That is process
  *	synchronous but doesn't hold any locks, so we need to make sure we
  *	have the appropriate locks for what we're doing.
  *
-- 
cgit v1.2.3


From 8a6d2ea0cd121e3bfff4dbce5bc111874cf9e9d2 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue, 22 Jul 2008 21:53:40 -0700
Subject: sky2: don't stop queue on shutdown

It is unnecessary, to stop queue and turn off carrier in shutdown
routine. With new netdev_queue this causes warnings.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sky2.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 711e4a8948e..5257cf464f1 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1829,9 +1829,6 @@ static int sky2_down(struct net_device *dev)
 	if (netif_msg_ifdown(sky2))
 		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
-	/* Stop more packets from being queued */
-	netif_stop_queue(dev);
-
 	/* Disable port IRQ */
 	imask = sky2_read32(hw, B0_IMSK);
 	imask &= ~portirq_msk[port];
@@ -1887,8 +1884,6 @@ static int sky2_down(struct net_device *dev)
 
 	sky2_phy_power_down(hw, port);
 
-	netif_carrier_off(dev);
-
 	/* turn off LED's */
 	sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
 
-- 
cgit v1.2.3


From deca05c3e81df4fcc38aa891eb8d8add14bce68b Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@goober.(none)>
Date: Wed, 4 Jun 2008 21:20:32 +1000
Subject: m68knommu: change to a configs directory for board configurations

Remove the old example m68knommu defconfig. Create a configs directory
for specific board configurations. Make the m5208evb the default.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5208evb_defconfig | 610 ++++++++++++++++++++++++++++++
 1 file changed, 610 insertions(+)
 create mode 100644 arch/m68knommu/configs/m5208evb_defconfig

diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig
new file mode 100644
index 00000000000..6fae33a05e2
--- /dev/null
+++ b/arch/m68knommu/configs/m5208evb_defconfig
@@ -0,0 +1,610 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+CONFIG_M520x=y
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=166666666
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5208EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x2000000
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40020000
+# CONFIG_RAMAUTOBIT is not set
+# CONFIG_RAM8BIT is not set
+CONFIG_RAM16BIT=y
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 8c81b0574fd8877b5214f2d33816b199c62e3335 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@goober.(none)>
Date: Wed, 4 Jun 2008 21:22:18 +1000
Subject: m68knommu: defconfig for M5249EVB board

Add a defconfig for the Freescale M5249EVB board.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5249evb_defconfig | 497 ++++++++++++++++++++++++++++++
 1 file changed, 497 insertions(+)
 create mode 100644 arch/m68knommu/configs/m5249evb_defconfig

diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig
new file mode 100644
index 00000000000..cc6458333d6
--- /dev/null
+++ b/arch/m68knommu/configs/m5249evb_defconfig
@@ -0,0 +1,497 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+CONFIG_M5249=y
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=140000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5249C3=y
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From c26def07f97d662ee96362795400cbf6f44d11ce Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@goober.(none)>
Date: Wed, 4 Jun 2008 21:23:43 +1000
Subject: m68knommu: defconfig for M5275EVB board

Add a defconfig for the Freescale M5275EVB board.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5275evb_defconfig | 627 ++++++++++++++++++++++++++++++
 1 file changed, 627 insertions(+)
 create mode 100644 arch/m68knommu/configs/m5275evb_defconfig

diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig
new file mode 100644
index 00000000000..0d1256f5add
--- /dev/null
+++ b/arch/m68knommu/configs/m5275evb_defconfig
@@ -0,0 +1,627 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+CONFIG_M5275=y
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_M527x=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=150000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5275EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+CONFIG_FEC2=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From f3a64eaf9ea87d70487b482a6d733cfd52ae4499 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@goober.(none)>
Date: Wed, 4 Jun 2008 21:24:54 +1000
Subject: m68knommu: defconfig for M5307C3 board

Add a defconfig for the Freescale M5307C3 board.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5307c3_defconfig | 580 +++++++++++++++++++++++++++++++
 1 file changed, 580 insertions(+)
 create mode 100644 arch/m68knommu/configs/m5307c3_defconfig

diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig
new file mode 100644
index 00000000000..fe2acdfa4d7
--- /dev/null
+++ b/arch/m68knommu/configs/m5307c3_defconfig
@@ -0,0 +1,580 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+CONFIG_M5307=y
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=90000000
+CONFIG_CLOCK_DIV=2
+# CONFIG_OLDMASK is not set
+
+#
+# Platform
+#
+# CONFIG_ARN5307 is not set
+CONFIG_M5307C3=y
+# CONFIG_eLIA is not set
+# CONFIG_SECUREEDGEMP3 is not set
+# CONFIG_CLEOPATRA is not set
+# CONFIG_NETtel is not set
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From ab88e474c8ffa300660f03a8e6b08ea660956bef Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@goober.(none)>
Date: Wed, 4 Jun 2008 21:26:38 +1000
Subject: m68knommu: defconfig for M5407C3 board

Add a defconfig for the Freescale M5407C3 board.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/configs/m5407c3_defconfig | 641 +++++++++++++++++++++++++++++++
 1 file changed, 641 insertions(+)
 create mode 100644 arch/m68knommu/configs/m5407c3_defconfig

diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig
new file mode 100644
index 00000000000..1118936d20e
--- /dev/null
+++ b/arch/m68knommu/configs/m5407c3_defconfig
@@ -0,0 +1,641 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+# Wed May  7 10:25:16 2008
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+CONFIG_M5407=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=50000000
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+CONFIG_M5407C3=y
+# CONFIG_CLEOPATRA is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 5732b38ddb770b98110ea218232fc072e5626b87 Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Fri, 9 May 2008 16:18:33 +0200
Subject: m68knommu: Add Coldfire DMA Timer support

This one could be used as a hrtimer.

Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/coldfire/Makefile    |  2 +-
 arch/m68knommu/platform/coldfire/dma_timer.c | 68 ++++++++++++++++++++++++++++
 2 files changed, 69 insertions(+), 1 deletion(-)
 create mode 100644 arch/m68knommu/platform/coldfire/dma_timer.c

diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 40cf20be1b9..4f416a91a82 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_COLDFIRE)	+= dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= timers.o
 obj-$(CONFIG_M5206e)	+= timers.o
 obj-$(CONFIG_M520x)	+= pit.o
-obj-$(CONFIG_M523x)	+= pit.o
+obj-$(CONFIG_M523x)	+= pit.o dma_timer.o
 obj-$(CONFIG_M5249)	+= timers.o
 obj-$(CONFIG_M527x)	+= pit.o
 obj-$(CONFIG_M5272)	+= timers.o
diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c
new file mode 100644
index 00000000000..b623c993219
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/dma_timer.c
@@ -0,0 +1,68 @@
+/*
+ * dma_timer.c -- Freescale ColdFire DMA Timer.
+ *
+ * Copyright (C) 2007, Benedikt Spranger <b.spranger@linutronix.de>
+ * Copyright (C) 2008. Sebastian Siewior, Linutronix
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+#define DMA_TIMER_0	(0x00)
+#define DMA_TIMER_1	(0x40)
+#define DMA_TIMER_2	(0x80)
+#define DMA_TIMER_3	(0xc0)
+
+#define DTMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x400)
+#define DTXMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x402)
+#define DTER0	(MCF_IPSBAR + DMA_TIMER_0 + 0x403)
+#define DTRR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x404)
+#define DTCR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x408)
+#define DTCN0	(MCF_IPSBAR + DMA_TIMER_0 + 0x40c)
+
+#define DMA_FREQ    ((MCF_CLK / 2) / 16)
+
+/* DTMR */
+#define DMA_DTMR_RESTART	(1 << 3)
+#define DMA_DTMR_CLK_DIV_1	(1 << 1)
+#define DMA_DTMR_CLK_DIV_16	(2 << 1)
+#define DMA_DTMR_ENABLE		(1 << 0)
+
+static cycle_t cf_dt_get_cycles(void)
+{
+	return __raw_readl(DTCN0);
+}
+
+static struct clocksource clocksource_cf_dt = {
+	.name		= "coldfire_dma_timer",
+	.rating		= 200,
+	.read		= cf_dt_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init  init_cf_dt_clocksource(void)
+{
+	/*
+	 * We setup DMA timer 0 in free run mode. This incrementing counter is
+	 * used as a highly precious clock source. With MCF_CLOCK = 150 MHz we
+	 * get a ~213 ns resolution and the 32bit register will overflow almost
+	 * every 15 minutes.
+	 */
+	__raw_writeb(0x00, DTXMR0);
+	__raw_writeb(0x00, DTER0);
+	__raw_writel(0x00000000, DTRR0);
+	__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
+	clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
+						     clocksource_cf_dt.shift);
+	return clocksource_register(&clocksource_cf_dt);
+}
+
+arch_initcall(init_cf_dt_clocksource);
-- 
cgit v1.2.3


From 1fda83d83c664ad74bfec8ce093a86d4d962f093 Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Fri, 9 May 2008 16:13:36 +0200
Subject: m68knommu: m68knommu: add old stack trace method

The old method is used when frame pointers are not available.
Also fix formating with CONFIG_KALLSYMS=n which eliminates \n.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/kernel/traps.c | 38 +++++++++++++++++++++++++++++++++++---
 1 file changed, 35 insertions(+), 3 deletions(-)

diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index ec9aea652e7..46f8f9d0c40 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -103,12 +103,28 @@ asmlinkage void buserr_c(struct frame *fp)
 	force_sig(SIGSEGV, current);
 }
 
+static void print_this_address(unsigned long addr, int i)
+{
+#ifdef CONFIG_KALLSYMS
+	printk(KERN_EMERG " [%08lx] ", addr);
+	print_symbol(KERN_CONT "%s\n", addr);
+#else
+	if (i % 5)
+		printk(KERN_CONT " [%08lx] ", addr);
+	else
+		printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+	i++;
+#endif
+}
+
 int kstack_depth_to_print = 48;
 
 static void __show_stack(struct task_struct *task, unsigned long *stack)
 {
 	unsigned long *endstack, addr;
+#ifdef CONFIG_FRAME_POINTER
 	unsigned long *last_stack;
+#endif
 	int i;
 
 	if (!stack)
@@ -126,6 +142,7 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 		printk(" %08lx", *(stack + i));
 	}
 	printk("\n");
+	i = 0;
 
 #ifdef CONFIG_FRAME_POINTER
 	printk(KERN_EMERG "Call Trace:\n");
@@ -134,15 +151,30 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 	while (stack <= endstack && stack > last_stack) {
 
 		addr = *(stack + 1);
-		printk(KERN_EMERG " [%08lx] ", addr);
-		print_symbol(KERN_CONT "%s\n", addr);
+		print_this_address(addr, i);
+		i++;
 
 		last_stack = stack;
 		stack = (unsigned long *)*stack;
 	}
 	printk("\n");
 #else
-	printk(KERN_EMERG "CONFIG_FRAME_POINTER disabled, no symbolic call trace\n");
+	printk(KERN_EMERG "Call Trace with CONFIG_FRAME_POINTER disabled:\n");
+	while (stack <= endstack) {
+		addr = *stack++;
+		/*
+		 * If the address is either in the text segment of the kernel,
+		 * or in a region which is occupied by a module then it *may*
+		 * be the address of a calling routine; if so, print it so that
+		 * someone tracing down the cause of the crash will be able to
+		 * figure out the call path that was taken.
+		 */
+		if (__kernel_text_address(addr)) {
+			print_this_address(addr, i);
+			i++;
+		}
+	}
+	printk(KERN_CONT "\n");
 #endif
 }
 
-- 
cgit v1.2.3


From 0df185f5a1430ab8b437be402d286ee0728ef9f8 Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Mon, 28 Apr 2008 11:43:00 +0200
Subject: m68knommu: move code within time.c

This patch creates two functions do_set_rtc() and read_rtc_mmss()
based on allready available code.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/kernel/time.c | 40 ++++++++++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 14 deletions(-)

diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index 0ccfb2ad638..d33ed9a84cc 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -33,22 +33,11 @@ static inline int set_rtc_mmss(unsigned long nowtime)
 	return -1;
 }
 
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-irqreturn_t arch_timer_interrupt(int irq, void *dummy)
+static inline void do_set_rtc(void)
 {
 	/* last time the cmos clock got updated */
 	static long last_rtc_update=0;
 
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-
-	write_seqlock(&xtime_lock);
-
-	do_timer(1);
-
 	/*
 	 * If we have an externally synchronized Linux clock, then update
 	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
@@ -63,6 +52,23 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 	  else
 	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
 	}
+}
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+irqreturn_t arch_timer_interrupt(int irq, void *dummy)
+{
+
+	if (current->pid)
+		profile_tick(CPU_PROFILING);
+
+	write_seqlock(&xtime_lock);
+
+	do_timer(1);
+
+	do_set_rtc();
 
 	write_sequnlock(&xtime_lock);
 
@@ -72,7 +78,7 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 	return(IRQ_HANDLED);
 }
 
-void time_init(void)
+static unsigned long read_rtc_mmss(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
@@ -83,7 +89,13 @@ void time_init(void)
 
 	if ((year += 1900) < 1970)
 		year += 100;
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
+
+	return  mktime(year, mon, day, hour, min, sec);;
+}
+
+void time_init(void)
+{
+	xtime.tv_sec = read_rtc_mmss();
 	xtime.tv_nsec = 0;
 	wall_to_monotonic.tv_sec = -xtime.tv_sec;
 
-- 
cgit v1.2.3


From 95469bd64a7a9ab405b566deb8c81d4aaf67ed9e Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Mon, 28 Apr 2008 11:43:01 +0200
Subject: m68knommu: complete generic time

do_set_rtc() isn't required because the work that is handled is
allready served if read_persistent_clock() & update_persistent_clock()
are implemented and CONFIG_GENERIC_CMOS_UPDATE is. sync_cmos_clock()
looks very familiar :)

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/Kconfig       |  4 ++++
 arch/m68knommu/kernel/time.c | 38 ++++++++++----------------------------
 2 files changed, 14 insertions(+), 28 deletions(-)

diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8e8441587c2..bfd35304d58 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -58,6 +58,10 @@ config GENERIC_TIME
 	bool
 	default y
 
+config GENERIC_CMOS_UPDATE
+	bool
+	default y
+
 config TIME_LOW_RES
 	bool
 	default y
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index d33ed9a84cc..67944aa2728 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -33,27 +33,6 @@ static inline int set_rtc_mmss(unsigned long nowtime)
 	return -1;
 }
 
-static inline void do_set_rtc(void)
-{
-	/* last time the cmos clock got updated */
-	static long last_rtc_update=0;
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec  / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-	  if (set_rtc_mmss(xtime.tv_sec) == 0)
-	    last_rtc_update = xtime.tv_sec;
-	  else
-	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-}
-
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
@@ -68,8 +47,6 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 
 	do_timer(1);
 
-	do_set_rtc();
-
 	write_sequnlock(&xtime_lock);
 
 #ifndef CONFIG_SMP
@@ -93,12 +70,17 @@ static unsigned long read_rtc_mmss(void)
 	return  mktime(year, mon, day, hour, min, sec);;
 }
 
-void time_init(void)
+unsigned long read_persistent_clock(void)
+{
+	return read_rtc_mmss();
+}
+
+int update_persistent_clock(struct timespec now)
 {
-	xtime.tv_sec = read_rtc_mmss();
-	xtime.tv_nsec = 0;
-	wall_to_monotonic.tv_sec = -xtime.tv_sec;
+	return set_rtc_mmss(now.tv_sec);
+}
 
+void time_init(void)
+{
 	hw_timer_init();
 }
-
-- 
cgit v1.2.3


From 5bed10a5ee272fbf18ce0ce764245bbb8f28e2e6 Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Mon, 28 Apr 2008 11:43:03 +0200
Subject: m68knommu: add sched_clock() for the DMA timer

with this printk() and other sched_clock() user use the more precise
timestamps. The highly optimized math is from arch/x86/kernel/tsc_32.c.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/coldfire/dma_timer.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c
index b623c993219..772578b1084 100644
--- a/arch/m68knommu/platform/coldfire/dma_timer.c
+++ b/arch/m68knommu/platform/coldfire/dma_timer.c
@@ -66,3 +66,19 @@ static int __init  init_cf_dt_clocksource(void)
 }
 
 arch_initcall(init_cf_dt_clocksource);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+#define CYC2NS_SCALE	((1000000 << CYC2NS_SCALE_FACTOR) / (DMA_FREQ / 1000))
+
+static unsigned long long cycles2ns(unsigned long cycl)
+{
+	return (unsigned long long) ((unsigned long long)cycl *
+			CYC2NS_SCALE) >> CYC2NS_SCALE_FACTOR;
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long cycl = __raw_readl(DTCN0);
+
+	return cycles2ns(cycl);
+}
-- 
cgit v1.2.3


From a6260ef84103fa8a51a67b6a58e5e16c676e08ad Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Fri, 9 May 2008 16:10:37 +0200
Subject: m68knommu: add ffs and __ffs plattform which support ISA A+ or ISA C

the ff1 and bitrev opcode appears in ISA C and ISA A+ what isn't
supported by all plattforms. The assembly optimization is automaticly
enabled if the compiler understand the required cpu keyword.
My m5235 seems to boot and run fine so far.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/Makefile        | 11 +++++++----
 include/asm-m68knommu/bitops.h | 30 ++++++++++++++++++++++++++++++
 2 files changed, 37 insertions(+), 4 deletions(-)

diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index e0b5f62e395..b63bbcf874f 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -8,6 +8,8 @@
 # (C) Copyright 2002, Greg Ungerer <gerg@snapgear.com>
 #
 
+KBUILD_DEFCONFIG := m5208evb_defconfig
+
 platform-$(CONFIG_M68328)	:= 68328
 platform-$(CONFIG_M68EZ328)	:= 68EZ328
 platform-$(CONFIG_M68VZ328)	:= 68VZ328
@@ -90,13 +92,14 @@ export PLATFORM BOARD MODEL CPUCLASS
 cflags-$(CONFIG_M5206)		:= -m5200
 cflags-$(CONFIG_M5206e)		:= -m5200
 cflags-$(CONFIG_M520x)		:= -m5307
-cflags-$(CONFIG_M523x)		:= -m5307
+cflags-$(CONFIG_M523x)		:= $(call cc-option,-mcpu=523x,-m5307)
 cflags-$(CONFIG_M5249)		:= -m5200
-cflags-$(CONFIG_M527x)		:= -m5307
+cflags-$(CONFIG_M5271)		:= $(call cc-option,-mcpu=5271,-m5307)
 cflags-$(CONFIG_M5272)		:= -m5307
-cflags-$(CONFIG_M528x)		:= -m5307
+cflags-$(CONFIG_M5275)		:= $(call cc-option,-mcpu=5275,-m5307)
+cflags-$(CONFIG_M528x)		:= $(call cc-option,-m528x,-m5307)
 cflags-$(CONFIG_M5307)		:= -m5307
-cflags-$(CONFIG_M532x)		:= -m5307
+cflags-$(CONFIG_M532x)		:= $(call cc-option,-mcpu=532x,-m5307)
 cflags-$(CONFIG_M5407)		:= -m5200
 cflags-$(CONFIG_M68328)		:= -m68000
 cflags-$(CONFIG_M68EZ328)	:= -m68000
diff --git a/include/asm-m68knommu/bitops.h b/include/asm-m68knommu/bitops.h
index c142fbf2f37..6f3685eab44 100644
--- a/include/asm-m68knommu/bitops.h
+++ b/include/asm-m68knommu/bitops.h
@@ -14,8 +14,38 @@
 #error only <linux/bitops.h> can be included directly
 #endif
 
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline int ffs(unsigned int val)
+{
+        if (!val)
+                return 0;
+
+        asm volatile(
+                        "bitrev %0\n\t"
+                        "ff1 %0\n\t"
+                        : "=d" (val)
+                        : "0" (val)
+		    );
+        val++;
+        return val;
+}
+
+static inline int __ffs(unsigned int val)
+{
+        asm volatile(
+                        "bitrev %0\n\t"
+                        "ff1 %0\n\t"
+                        : "=d" (val)
+                        : "0" (val)
+		    );
+        return val;
+}
+
+#else
 #include <asm-generic/bitops/ffs.h>
 #include <asm-generic/bitops/__ffs.h>
+#endif
+
 #include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/ffz.h>
 
-- 
cgit v1.2.3


From e872504b311cec52f7a316a0037fb959080dbea0 Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Sat, 17 May 2008 21:51:15 +0200
Subject: m68knommu: add byteswap assembly opcode for ISA A+

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 include/asm-m68knommu/byteorder.h | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/include/asm-m68knommu/byteorder.h b/include/asm-m68knommu/byteorder.h
index 8fcde907b0f..20bb4426b61 100644
--- a/include/asm-m68knommu/byteorder.h
+++ b/include/asm-m68knommu/byteorder.h
@@ -1,13 +1,27 @@
 #ifndef _M68KNOMMU_BYTEORDER_H
 #define _M68KNOMMU_BYTEORDER_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
 #  define __BYTEORDER_HAS_U64__
 #  define __SWAB_64_THRU_32__
 #endif
 
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 val)
+{
+	asm(
+			"byterev %0"
+			: "=d" (val)
+			: "0" (val)
+	   );
+	return val;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#endif
+
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _M68KNOMMU_BYTEORDER_H */
-- 
cgit v1.2.3


From 6dbeb456baaba05d60e7ca8213da26142062408a Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Tue, 13 May 2008 18:52:44 +0200
Subject: m68knommu: add read_barrier_depends() and irqs_disabled_flags()

/home/bigeasy/git/linux-2.6-ftrace/kernel/trace/trace.c: In function 'tracing_generic_entry_update':
/home/bigeasy/git/linux-2.6-ftrace/kernel/trace/trace.c:802: error: implicit declaration of function 'irqs_disabled_flags'
make[3]: *** [kernel/trace/trace.o] Error 1
/home/bigeasy/git/linux-2.6-ftrace/kernel/trace/ftrace.c: In function 'ftrace_list_func':
/home/bigeasy/git/linux-2.6-ftrace/kernel/trace/ftrace.c:61: error: implicit declaration of function 'read_barrier_depends'

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 include/asm-m68knommu/system.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/include/asm-m68knommu/system.h b/include/asm-m68knommu/system.h
index 64c64432bbb..40f49de6982 100644
--- a/include/asm-m68knommu/system.h
+++ b/include/asm-m68knommu/system.h
@@ -118,6 +118,8 @@ asmlinkage void resume(void);
 #define smp_read_barrier_depends()	do { } while(0)
 #endif
 
+#define read_barrier_depends()  ((void)0)
+
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
 
 struct __xchg_dummy { unsigned long a[100]; };
@@ -310,4 +312,13 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 #endif
 #define arch_align_stack(x) (x)
 
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+	if (flags & 0x0700)
+		return 0;
+	else
+		return 1;
+}
+
 #endif /* _M68KNOMMU_SYSTEM_H */
-- 
cgit v1.2.3


From 2b9a69861c39ae4c232385def833816acc07a0a4 Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Mon, 28 Apr 2008 11:43:04 +0200
Subject: m68knommu: MCF5307 PIT GENERIC_CLOCKEVENTS support

The PIT code has been changed in order to suppport GENERIC_CLOCKEVENTS.
The priority of the PIT clocksource has been decreased in favor of the
DMA timer.

pit_cycles_per_jiffy become a constant (PIT_CYCLES_PER_JIFFY) because it
is known at compile time and does not change afterwards.

Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/Kconfig                 | 11 ++++
 arch/m68knommu/kernel/time.c           |  2 +
 arch/m68knommu/platform/coldfire/pit.c | 91 +++++++++++++++++++++++++++++-----
 3 files changed, 91 insertions(+), 13 deletions(-)

diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index bfd35304d58..2e7515e8db9 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -66,6 +66,10 @@ config TIME_LOW_RES
 	bool
 	default y
 
+config GENERIC_CLOCKEVENTS
+	bool
+	default n
+
 config NO_IOPORT
 	def_bool y
 
@@ -112,11 +116,13 @@ config M5206e
 
 config M520x
 	bool "MCF520x"
+	select GENERIC_CLOCKEVENTS
 	help
 	   Freescale Coldfire 5207/5208 processor support.
 
 config M523x
 	bool "MCF523x"
+	select GENERIC_CLOCKEVENTS
 	help
 	  Freescale Coldfire 5230/1/2/4/5 processor support
 
@@ -142,6 +148,7 @@ config M5275
 
 config M528x
 	bool "MCF528x"
+	select GENERIC_CLOCKEVENTS
 	help
 	  Motorola ColdFire 5280/5282 processor support.
 
@@ -165,6 +172,7 @@ endchoice
 config M527x
 	bool
 	depends on (M5271 || M5275)
+	select GENERIC_CLOCKEVENTS
 	default y
 
 config COLDFIRE
@@ -678,6 +686,9 @@ endchoice
 if COLDFIRE
 source "kernel/Kconfig.preempt"
 endif
+
+source "kernel/time/Kconfig"
+
 source "mm/Kconfig"
 
 endmenu
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index 67944aa2728..d182b2f7221 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -33,6 +33,7 @@ static inline int set_rtc_mmss(unsigned long nowtime)
 	return -1;
 }
 
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
@@ -54,6 +55,7 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 #endif
 	return(IRQ_HANDLED);
 }
+#endif
 
 static unsigned long read_rtc_mmss(void)
 {
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 4290638012e..c5b916700b2 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
 #include <asm/coldfire.h>
@@ -33,22 +33,86 @@
 #define	FREQ	((MCF_CLK / 2) / 64)
 #define	TA(a)	(MCF_IPSBAR + MCFPIT_BASE1 + (a))
 #define	INTC0	(MCF_IPSBAR + MCFICM_INTC0)
+#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
 
-static u32 pit_cycles_per_jiffy;
 static u32 pit_cnt;
 
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+
+static void init_cf_pit_timer(enum clock_event_mode mode,
+                             struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \
+				MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \
+				TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		/* Nothing to do here */
+		break;
+	}
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int cf_pit_next_event(unsigned long delta,
+		struct clock_event_device *evt)
+{
+	__raw_writew(delta, TA(MCFPIT_PMR));
+	return 0;
+}
+
+struct clock_event_device cf_pit_clockevent = {
+	.name		= "pit",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= init_cf_pit_timer,
+	.set_next_event	= cf_pit_next_event,
+	.shift		= 32,
+	.irq		= MCFINT_VECBASE + MCFINT_PIT1,
+};
+
+
+
 /***************************************************************************/
 
 static irqreturn_t pit_tick(int irq, void *dummy)
 {
+	struct clock_event_device *evt = &cf_pit_clockevent;
 	u16 pcsr;
 
 	/* Reset the ColdFire timer */
 	pcsr = __raw_readw(TA(MCFPIT_PCSR));
 	__raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
 
-	pit_cnt += pit_cycles_per_jiffy;
-	return arch_timer_interrupt(irq, dummy);
+	pit_cnt += PIT_CYCLES_PER_JIFFY;
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
 }
 
 /***************************************************************************/
@@ -72,14 +136,14 @@ static cycle_t pit_read_clk(void)
 	cycles = pit_cnt;
 	local_irq_restore(flags);
 
-	return cycles + pit_cycles_per_jiffy - pcntr;
+	return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
 }
 
 /***************************************************************************/
 
 static struct clocksource pit_clk = {
 	.name	= "pit",
-	.rating	= 250,
+	.rating	= 100,
 	.read	= pit_read_clk,
 	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
@@ -92,6 +156,14 @@ void hw_timer_init(void)
 {
 	u32 imr;
 
+	cf_pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id());
+	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
+	cf_pit_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
+	cf_pit_clockevent.min_delta_ns =
+		clockevent_delta2ns(0x3f, &cf_pit_clockevent);
+	clockevents_register_device(&cf_pit_clockevent);
+
 	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
 
 	__raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1);
@@ -99,13 +171,6 @@ void hw_timer_init(void)
 	imr &= ~MCFPIT_IMR_IBIT;
 	__raw_writel(imr, INTC0 + MCFPIT_IMR);
 
-	/* Set up PIT timer 1 as poll clock */
-	pit_cycles_per_jiffy = FREQ / HZ;
-	__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
-	__raw_writew(pit_cycles_per_jiffy, TA(MCFPIT_PMR));
-	__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | MCFPIT_PCSR_OVW |
-		MCFPIT_PCSR_RLD | MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
-
 	pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
 	clocksource_register(&pit_clk);
 }
-- 
cgit v1.2.3


From 0d176af5b7e658490b75427ccd23ff6a158c472b Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Mon, 28 Apr 2008 11:43:20 +0200
Subject: m68knommu: fec: remove FADS

I found config FADS only in ppc/Kconfig. Bye bye relic.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 drivers/net/fec.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 32a4f17d35f..6abbcd5f7c3 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -2,12 +2,6 @@
  * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
  * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
  *
- * This version of the driver is specific to the FADS implementation,
- * since the board contains control registers external to the processor
- * for the control of the LevelOne LXT970 transceiver.  The MPC860T manual
- * describes connections using the internal parallel port I/O, which
- * is basically all of Port D.
- *
  * Right now, I am very wasteful with the buffers.  I allocate memory
  * pages and then divide them into 2K frame buffers.  This way I know I
  * have buffers large enough to hold one frame within one buffer descriptor.
@@ -1809,10 +1803,6 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
 	*/
 	*((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
 #endif
-#ifdef CONFIG_FADS
-	if (request_8xxirq(SIU_IRQ2, mii_link_interrupt, 0, "mii", dev) != 0)
-		panic("Could not allocate MII IRQ!");
-#endif
 }
 
 static void __inline__ fec_get_mac(struct net_device *dev)
-- 
cgit v1.2.3


From c1863bed8c88324405dc2a922c153fe5d7df716c Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Mon, 28 Apr 2008 11:43:17 +0200
Subject: m68knommu: remove RPXCLASSIC from the m68k tree

This ifdefs are leftovers from the time as the driver was running
on a ppc.
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 drivers/net/fec.c                | 42 ----------------------------------------
 include/asm-m68knommu/commproc.h | 19 ------------------
 2 files changed, 61 deletions(-)

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 6abbcd5f7c3..0ef7226efd5 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -43,17 +43,9 @@
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
 
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
-    defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x) || defined(CONFIG_M532x)
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include "fec.h"
-#else
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include "commproc.h"
-#endif
 
 #if defined(CONFIG_FEC2)
 #define	FEC_MAX_PORTS	2
@@ -1229,14 +1221,9 @@ static phy_info_t const * const phy_info[] = {
 
 /* ------------------------------------------------------------------------- */
 #ifdef HAVE_mii_link_interrupt
-#ifdef CONFIG_RPXCLASSIC
-static void
-mii_link_interrupt(void *dev_id);
-#else
 static irqreturn_t
 mii_link_interrupt(int irq, void * dev_id);
 #endif
-#endif
 
 #if defined(CONFIG_M5272)
 /*
@@ -1789,20 +1776,6 @@ static void __inline__ fec_request_intrs(struct net_device *dev)
 
 	if (request_8xxirq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
 		panic("Could not allocate FEC IRQ!");
-
-#ifdef CONFIG_RPXCLASSIC
-	/* Make Port C, bit 15 an input that causes interrupts.
-	*/
-	immap->im_ioport.iop_pcpar &= ~0x0001;
-	immap->im_ioport.iop_pcdir &= ~0x0001;
-	immap->im_ioport.iop_pcso &= ~0x0001;
-	immap->im_ioport.iop_pcint |= 0x0001;
-	cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev);
-
-	/* Make LEDS reflect Link status.
-	*/
-	*((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
-#endif
 }
 
 static void __inline__ fec_get_mac(struct net_device *dev)
@@ -1811,16 +1784,6 @@ static void __inline__ fec_get_mac(struct net_device *dev)
 
 	bd = (bd_t *)__res;
 	memcpy(dev->dev_addr, bd->bi_enetaddr, ETH_ALEN);
-
-#ifdef CONFIG_RPXCLASSIC
-	/* The Embedded Planet boards have only one MAC address in
-	 * the EEPROM, but can have two Ethernet ports.  For the
-	 * FEC port, we create another address by setting one of
-	 * the address bits above something that would have (up to
-	 * now) been allocated.
-	 */
-	dev->dev_adrd[3] |= 0x80;
-#endif
 }
 
 static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
@@ -2099,13 +2062,8 @@ mii_discover_phy(uint mii_reg, struct net_device *dev)
 /* This interrupt occurs when the PHY detects a link change.
 */
 #ifdef HAVE_mii_link_interrupt
-#ifdef CONFIG_RPXCLASSIC
-static void
-mii_link_interrupt(void *dev_id)
-#else
 static irqreturn_t
 mii_link_interrupt(int irq, void * dev_id)
-#endif
 {
 	struct	net_device *dev = dev_id;
 	struct fec_enet_private *fep = netdev_priv(dev);
diff --git a/include/asm-m68knommu/commproc.h b/include/asm-m68knommu/commproc.h
index 36e870b468e..edf5eb6c08d 100644
--- a/include/asm-m68knommu/commproc.h
+++ b/include/asm-m68knommu/commproc.h
@@ -519,25 +519,6 @@ typedef struct scc_enet {
 #define SICR_ENET_CLKRT	((uint)0x00002c00)
 #endif
 
-#ifdef CONFIG_RPXCLASSIC
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-#endif
-
 /* SCC Event register as used by Ethernet.
 */
 #define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
-- 
cgit v1.2.3


From 87f4abb45bc640638e6986f0f4d412b2d0ea21e1 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 6 Jun 2008 15:55:36 +1000
Subject: m68knommu: remove last use of CONFIG_FADS and CONFIG_RPXCLASSIC

They have never been used in this port of the driver. It is has only
ever been used on the ColdFire SoC ethernet core.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 drivers/net/fec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 0ef7226efd5..ecd5c71a7a8 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -53,7 +53,7 @@
 #define	FEC_MAX_PORTS	1
 #endif
 
-#if defined(CONFIG_FADS) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_M5272)
+#if defined(CONFIG_M5272)
 #define HAVE_mii_link_interrupt
 #endif
 
-- 
cgit v1.2.3


From 9b0e74102494971ca37a425c63031fea68bb5b79 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 11 Jul 2008 15:29:36 +1000
Subject: m68knommu: put ColdFire head code into .text.head section

Switch the ColdFire head start up code to be in the .text.head segment.
And make sure that segment is at the start of the final linked text
segment. Fixes the linker warnings about section use mis-matches:

  WARNING: vmlinux.o(.text+0xa8): Section mismatch in reference from the variable _clear_bss to the function .init.text:start_kernel()
  The function _clear_bss() references
  the function __init start_kernel().
  This is often because _clear_bss lacks a __init
  annotation or the annotation of start_kernel is wrong.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/kernel/vmlinux.lds.S     | 1 +
 arch/m68knommu/platform/coldfire/head.S | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 93e69236ed6..69ba9b10767 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -62,6 +62,7 @@ SECTIONS {
 	.text : {
 		_text = .;
 		_stext = . ;
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
index b9aa0ca29bf..2b0d73c0cc3 100644
--- a/arch/m68knommu/platform/coldfire/head.S
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -10,6 +10,7 @@
 
 #include <linux/sys.h>
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/asm-offsets.h>
 #include <asm/coldfire.h>
 #include <asm/mcfcache.h>
@@ -126,7 +127,7 @@ _ramend:
 
 /*****************************************************************************/
 
-.text
+__HEAD
 
 /*
  *	This is the codes first entry point. This is where it all
-- 
cgit v1.2.3


From b7c2a75725dee9b5643a0aae3a4cb47f52e00a49 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 22 Jul 2008 22:34:29 -0700
Subject: sparc64: Fix lockdep issues in LDC protocol layer.

We're calling request_irq() with a IRQs disabled.

No straightforward fix exists because we want to
enable these IRQs and setup state atomically before
getting into the IRQ handler the first time.

What happens now is that we mark the VIRQ to not be
automatically enabled by request_irq().  Then we
make explicit enable_irq() calls when we grab the
LDC channel.

This way we don't need to call request_irq() illegally
under the LDC channel lock any more.

Bump LDC version and release date.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/irq.c | 10 +++++++++-
 arch/sparc64/kernel/ldc.c | 38 +++++++++++++++++++-------------------
 2 files changed, 28 insertions(+), 20 deletions(-)

diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index b441a26b73b..c481673d249 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -621,8 +621,9 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino)
 unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 {
 	struct irq_handler_data *data;
-	struct ino_bucket *bucket;
 	unsigned long hv_err, cookie;
+	struct ino_bucket *bucket;
+	struct irq_desc *desc;
 	unsigned int virt_irq;
 
 	bucket = kzalloc(sizeof(struct ino_bucket), GFP_ATOMIC);
@@ -643,6 +644,13 @@ unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 	if (unlikely(!data))
 		return 0;
 
+	/* In order to make the LDC channel startup sequence easier,
+	 * especially wrt. locking, we do not let request_irq() enable
+	 * the interrupt.
+	 */
+	desc = irq_desc + virt_irq;
+	desc->status |= IRQ_NOAUTOEN;
+
 	set_irq_chip_data(virt_irq, data);
 
 	/* Catch accidental accesses to these things.  IMAP/ICLR handling
diff --git a/arch/sparc64/kernel/ldc.c b/arch/sparc64/kernel/ldc.c
index 63969f61028..d68982330f6 100644
--- a/arch/sparc64/kernel/ldc.c
+++ b/arch/sparc64/kernel/ldc.c
@@ -1,6 +1,6 @@
 /* ldc.c: Logical Domain Channel link-layer protocol driver.
  *
- * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2007, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
@@ -23,8 +23,8 @@
 
 #define DRV_MODULE_NAME		"ldc"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.0"
-#define DRV_MODULE_RELDATE	"June 25, 2007"
+#define DRV_MODULE_VERSION	"1.1"
+#define DRV_MODULE_RELDATE	"July 22, 2008"
 
 static char version[] __devinitdata =
 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -1235,13 +1235,9 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 	unsigned long hv_err, flags;
 	int err = -EINVAL;
 
-	spin_lock_irqsave(&lp->lock, flags);
-
-	if (!name)
-		goto out_err;
-
-	if (lp->state != LDC_STATE_INIT)
-		goto out_err;
+	if (!name ||
+	    (lp->state != LDC_STATE_INIT))
+		return -EINVAL;
 
 	snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name);
 	snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name);
@@ -1250,25 +1246,32 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
 			  lp->rx_irq_name, lp);
 	if (err)
-		goto out_err;
+		return err;
 
 	err = request_irq(lp->cfg.tx_irq, ldc_tx,
 			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
 			  lp->tx_irq_name, lp);
-	if (err)
-		goto out_free_rx_irq;
+	if (err) {
+		free_irq(lp->cfg.rx_irq, lp);
+		return err;
+	}
+
 
+	spin_lock_irqsave(&lp->lock, flags);
+
+	enable_irq(lp->cfg.rx_irq);
+	enable_irq(lp->cfg.tx_irq);
 
 	lp->flags |= LDC_FLAG_REGISTERED_IRQS;
 
 	err = -ENODEV;
 	hv_err = sun4v_ldc_tx_qconf(lp->id, 0, 0);
 	if (hv_err)
-		goto out_free_tx_irq;
+		goto out_free_irqs;
 
 	hv_err = sun4v_ldc_tx_qconf(lp->id, lp->tx_ra, lp->tx_num_entries);
 	if (hv_err)
-		goto out_free_tx_irq;
+		goto out_free_irqs;
 
 	hv_err = sun4v_ldc_rx_qconf(lp->id, 0, 0);
 	if (hv_err)
@@ -1304,14 +1307,11 @@ out_unmap_rx:
 out_unmap_tx:
 	sun4v_ldc_tx_qconf(lp->id, 0, 0);
 
-out_free_tx_irq:
+out_free_irqs:
 	lp->flags &= ~LDC_FLAG_REGISTERED_IRQS;
 	free_irq(lp->cfg.tx_irq, lp);
-
-out_free_rx_irq:
 	free_irq(lp->cfg.rx_irq, lp);
 
-out_err:
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	return err;
-- 
cgit v1.2.3


From e14fa82439d33cef67eaafc1a48960bbfa610c8e Mon Sep 17 00:00:00 2001
From: Riku Voipio <riku.voipio@iki.fi>
Date: Sat, 31 May 2008 14:43:41 +0100
Subject: leds: Add pca9532 led driver

NXP pca9532 is a LED dimmer/controller attached to i2c bus.  It allows
attaching upto 16 leds which can either be on, off or dimmed and/or blinked
with the two PWM modulators available.

This driver is a "new-style" i2c driver that adheres to the driver model and
implements the led framework api.  Since the leds connected to the driver are
platform specific, it is only useful when platform data is passed to the
driver to define what leds are connected to which pins.

Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
---
 drivers/leds/Kconfig         |   8 +
 drivers/leds/Makefile        |   1 +
 drivers/leds/leds-pca9532.c  | 337 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/leds-pca9532.h |  45 ++++++
 4 files changed, 391 insertions(+)
 create mode 100644 drivers/leds/leds-pca9532.c
 create mode 100644 include/linux/leds-pca9532.h

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 86a369bc57d..1c35dfaef72 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -103,6 +103,14 @@ config LEDS_HP6XX
 	  This option enables led support for the handheld
 	  HP Jornada 620/660/680/690.
 
+config LEDS_PCA9532
+	tristate "LED driver for PCA9532 dimmer"
+	depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
+	help
+	  This option enables support for NXP pca9532
+	  led controller. It is generally only usefull
+	  as a platform driver
+
 config LEDS_GPIO
 	tristate "LED Support for GPIO connected LEDs"
 	depends on LEDS_CLASS && GENERIC_GPIO
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 973d626f5f4..7156f9970fa 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
 obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
 obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
 obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
+obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
new file mode 100644
index 00000000000..4064d4f6b33
--- /dev/null
+++ b/drivers/leds/leds-pca9532.c
@@ -0,0 +1,337 @@
+/*
+ * pca9532.c - 16-bit Led dimmer
+ *
+ * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/mutex.h>
+#include <linux/leds-pca9532.h>
+
+static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END};
+I2C_CLIENT_INSMOD_1(pca9532);
+
+#define PCA9532_REG_PSC(i) (0x2+(i)*2)
+#define PCA9532_REG_PWM(i) (0x3+(i)*2)
+#define PCA9532_REG_LS0  0x6
+#define LED_REG(led) ((led>>2)+PCA9532_REG_LS0)
+#define LED_NUM(led) (led & 0x3)
+
+#define ldev_to_led(c)       container_of(c, struct pca9532_led, ldev)
+
+struct pca9532_data {
+	struct i2c_client *client;
+	struct pca9532_led leds[16];
+	struct mutex update_lock;
+	struct input_dev    *idev;
+	u8 pwm[2];
+	u8 psc[2];
+};
+
+static int pca9532_probe(struct i2c_client *client,
+	const struct i2c_device_id *id);
+static int pca9532_remove(struct i2c_client *client);
+
+static const struct i2c_device_id pca9532_id[] = {
+	{ "pca9532", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, pca9532_id);
+
+static struct i2c_driver pca9532_driver = {
+	.driver = {
+		.name   = "pca9532",
+	},
+	.probe  = pca9532_probe,
+	.remove = pca9532_remove,
+	.id_table = pca9532_id,
+};
+
+/* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly,
+ * the clever Thecus people are using one pwm to drive the beeper. So,
+ * as a compromise we average one pwm to the values requested by all
+ * leds that are not ON/OFF.
+ * */
+static int pca9532_setpwm(struct i2c_client *client, int pwm, int blink,
+	enum led_brightness value)
+{
+	int a = 0, b = 0, i = 0;
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	for (i = 0; i < 16; i++) {
+		if (data->leds[i].type == PCA9532_TYPE_LED &&
+			data->leds[i].state == PCA9532_PWM0+pwm) {
+				a++;
+				b += data->leds[i].ldev.brightness;
+		}
+	}
+	if (a == 0) {
+		dev_err(&client->dev,
+		"fear of division by zero %d/%d, wanted %d\n",
+			b, a, value);
+		return -EINVAL;
+	}
+	b = b/a;
+	if (b > 0xFF)
+		return -EINVAL;
+	mutex_lock(&data->update_lock);
+	data->pwm[pwm] = b;
+	i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
+		data->pwm[pwm]);
+	data->psc[pwm] = blink;
+	i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
+		data->psc[pwm]);
+	mutex_unlock(&data->update_lock);
+	return 0;
+}
+
+/* Set LED routing */
+static void pca9532_setled(struct pca9532_led *led)
+{
+	struct i2c_client *client = led->client;
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	char reg;
+
+	mutex_lock(&data->update_lock);
+	reg = i2c_smbus_read_byte_data(client, LED_REG(led->id));
+	/* zero led bits */
+	reg = reg & ~(0x3<<LED_NUM(led->id)*2);
+	/* set the new value */
+	reg = reg | (led->state << LED_NUM(led->id)*2);
+	i2c_smbus_write_byte_data(client, LED_REG(led->id), reg);
+	mutex_unlock(&data->update_lock);
+}
+
+static void pca9532_set_brightness(struct led_classdev *led_cdev,
+	enum led_brightness value)
+{
+	int err = 0;
+	struct pca9532_led *led = ldev_to_led(led_cdev);
+
+	if (value == LED_OFF)
+		led->state = PCA9532_OFF;
+	else if (value == LED_FULL)
+		led->state = PCA9532_ON;
+	else {
+		led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
+		err = pca9532_setpwm(led->client, 0, 0, value);
+		if (err)
+			return; /* XXX: led api doesn't allow error code? */
+	}
+	pca9532_setled(led);
+}
+
+static int pca9532_set_blink(struct led_classdev *led_cdev,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct pca9532_led *led = ldev_to_led(led_cdev);
+	struct i2c_client *client = led->client;
+	int psc;
+
+	if (*delay_on == 0 && *delay_off == 0) {
+	/* led subsystem ask us for a blink rate */
+		*delay_on  = 1000;
+		*delay_off = 1000;
+	}
+	if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
+		return -EINVAL;
+
+	/* Thecus specific: only use PSC/PWM 0 */
+	psc = (*delay_on * 152-1)/1000;
+	return pca9532_setpwm(client, 0, psc, led_cdev->brightness);
+}
+
+int pca9532_event(struct input_dev *dev, unsigned int type, unsigned int code,
+	int value)
+{
+	struct pca9532_data *data = input_get_drvdata(dev);
+
+	if (type != EV_SND && (code != SND_BELL || code != SND_TONE))
+		return -1;
+
+	/* XXX: allow different kind of beeps with psc/pwm modifications */
+	if (value > 1 && value < 32767)
+		data->pwm[1] = 127;
+	else
+		data->pwm[1] = 0;
+
+	dev_info(&dev->dev, "setting beep to %d \n", data->pwm[1]);
+	mutex_lock(&data->update_lock);
+	i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
+		data->pwm[1]);
+	mutex_unlock(&data->update_lock);
+
+	return 0;
+}
+
+static int pca9532_configure(struct i2c_client *client,
+	struct pca9532_data *data, struct pca9532_platform_data *pdata)
+{
+	int i, err = 0;
+
+	for (i = 0; i < 2; i++)	{
+		data->pwm[i] = pdata->pwm[i];
+		data->psc[i] = pdata->psc[i];
+		i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(i),
+			data->pwm[i]);
+		i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(i),
+			data->psc[i]);
+	}
+
+	for (i = 0; i < 16; i++) {
+		struct pca9532_led *led = &data->leds[i];
+		struct pca9532_led *pled = &pdata->leds[i];
+		led->client = client;
+		led->id = i;
+		led->type = pled->type;
+		switch (led->type) {
+		case PCA9532_TYPE_NONE:
+			break;
+		case PCA9532_TYPE_LED:
+			led->state = pled->state;
+			led->name =  pled->name;
+			led->ldev.name = led->name;
+			led->ldev.brightness = LED_OFF;
+			led->ldev.brightness_set = pca9532_set_brightness;
+			led->ldev.blink_set = pca9532_set_blink;
+			if (led_classdev_register(&client->dev,
+				&led->ldev) < 0)	{
+				dev_err(&client->dev,
+					"couldn't register LED %s\n",
+					led->name);
+				goto exit;
+			}
+			pca9532_setled(led);
+			break;
+		case PCA9532_TYPE_N2100_BEEP:
+			BUG_ON(data->idev);
+			led->state = PCA9532_PWM1;
+			pca9532_setled(led);
+			data->idev = input_allocate_device();
+			if (data->idev == NULL) {
+				err = -ENOMEM;
+				goto exit;
+			}
+			data->idev->name = pled->name;
+			data->idev->phys = "i2c/pca9532";
+			data->idev->id.bustype = BUS_HOST;
+			data->idev->id.vendor  = 0x001f;
+			data->idev->id.product = 0x0001;
+			data->idev->id.version = 0x0100;
+			data->idev->evbit[0] = BIT_MASK(EV_SND);
+			data->idev->sndbit[0] = BIT_MASK(SND_BELL) |
+						BIT_MASK(SND_TONE);
+			data->idev->event = pca9532_event;
+			input_set_drvdata(data->idev, data);
+			err = input_register_device(data->idev);
+			if (err) {
+				input_free_device(data->idev);
+				data->idev = NULL;
+				goto exit;
+			}
+			break;
+		}
+	}
+	return 0;
+
+exit:
+	if (i > 0)
+		for (i = i - 1; i >= 0; i--)
+			switch (data->leds[i].type) {
+			case PCA9532_TYPE_NONE:
+				break;
+			case PCA9532_TYPE_LED:
+				led_classdev_unregister(&data->leds[i].ldev);
+				break;
+			case PCA9532_TYPE_N2100_BEEP:
+				if (data->idev != NULL) {
+					input_unregister_device(data->idev);
+					input_free_device(data->idev);
+					data->idev = NULL;
+				}
+				break;
+			}
+
+	return err;
+
+}
+
+static int pca9532_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	struct pca9532_platform_data *pca9532_pdata = client->dev.platform_data;
+
+	if (!i2c_check_functionality(client->adapter,
+		I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	data = kzalloc(sizeof(struct pca9532_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	dev_info(&client->dev, "setting platform data\n");
+	i2c_set_clientdata(client, data);
+	data->client = client;
+	mutex_init(&data->update_lock);
+
+	if (pca9532_pdata == NULL)
+		return -EIO;
+
+	pca9532_configure(client, data, pca9532_pdata);
+	return 0;
+
+}
+
+static int pca9532_remove(struct i2c_client *client)
+{
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	int i;
+	for (i = 0; i < 16; i++)
+		switch (data->leds[i].type) {
+		case PCA9532_TYPE_NONE:
+			break;
+		case PCA9532_TYPE_LED:
+			led_classdev_unregister(&data->leds[i].ldev);
+			break;
+		case PCA9532_TYPE_N2100_BEEP:
+			if (data->idev != NULL) {
+				input_unregister_device(data->idev);
+				input_free_device(data->idev);
+				data->idev = NULL;
+			}
+			break;
+		}
+
+	kfree(data);
+	i2c_set_clientdata(client, NULL);
+	return 0;
+}
+
+static int __init pca9532_init(void)
+{
+	return i2c_add_driver(&pca9532_driver);
+}
+
+static void __exit pca9532_exit(void)
+{
+	i2c_del_driver(&pca9532_driver);
+}
+
+MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCA 9532 LED dimmer");
+
+module_init(pca9532_init);
+module_exit(pca9532_exit);
+
diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h
new file mode 100644
index 00000000000..81b4207deb9
--- /dev/null
+++ b/include/linux/leds-pca9532.h
@@ -0,0 +1,45 @@
+/*
+ * pca9532.h - platform data structure for pca9532 led controller
+ *
+ * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ *
+ */
+
+#ifndef __LINUX_PCA9532_H
+#define __LINUX_PCA9532_H
+
+#include <linux/leds.h>
+
+enum pca9532_state {
+	PCA9532_OFF  = 0x0,
+	PCA9532_ON   = 0x1,
+	PCA9532_PWM0 = 0x2,
+	PCA9532_PWM1 = 0x3
+};
+
+enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED,
+	PCA9532_TYPE_N2100_BEEP };
+
+struct pca9532_led {
+	u8 id;
+	struct i2c_client *client;
+	char *name;
+	struct led_classdev ldev;
+	enum pca9532_type type;
+	enum pca9532_state state;
+};
+
+struct pca9532_platform_data {
+	struct pca9532_led leds[16];
+	u8 pwm[2];
+	u8 psc[2];
+};
+
+#endif /* __LINUX_PCA9532_H */
+
-- 
cgit v1.2.3


From 30be0486791fb637e758c771956c8f73bef3467c Mon Sep 17 00:00:00 2001
From: Riku Voipio <riku.voipio@iki.fi>
Date: Sat, 31 May 2008 14:45:16 +0100
Subject: leds: Add pca9532 platform data for Thecus N2100

Thecus N2100 has leds and a buzzer attached to a pca9532 controller.  Attach
the driver to the i2c bus and define the pca9532 pin coniguration for this
platform in n2100_leds.

With this patch, support for N2100 should be complete in mainline Linux.

Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
---
 arch/arm/mach-iop32x/n2100.c | 52 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2741063bf36..28f164ea472 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -17,6 +17,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/f75375s.h>
+#include <linux/leds-pca9532.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -206,6 +207,53 @@ static struct f75375s_platform_data n2100_f75375s = {
 	.pwm_enable = { 0, 0 },
 };
 
+static struct pca9532_platform_data n2100_leds = {
+	.leds = {
+	{	.name = "n2100:red:satafail0",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:satafail1",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:blue:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{ 	.type = PCA9532_TYPE_NONE },
+
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:red:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+
+	{	.type = PCA9532_TYPE_NONE }, /* power OFF gpio */
+	{	.type = PCA9532_TYPE_NONE }, /* reset gpio */
+	{	.type = PCA9532_TYPE_NONE },
+	{	.type = PCA9532_TYPE_NONE },
+
+	{	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:orange:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "N2100 beeper"  ,
+		.state =  PCA9532_OFF,
+		.type = PCA9532_TYPE_N2100_BEEP,
+	},
+	},
+	.psc = { 0, 0 },
+	.pwm = { 0, 0 },
+};
+
 static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rs5c372b", 0x32),
@@ -214,6 +262,10 @@ static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 		I2C_BOARD_INFO("f75375", 0x2e),
 		.platform_data = &n2100_f75375s,
 	},
+	{
+		I2C_BOARD_INFO("pca9532", 0x60),
+		.platform_data = &n2100_leds,
+	},
 };
 
 /*
-- 
cgit v1.2.3


From e49575f46cdb40014e14789a18e637f8fb917317 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Sat, 31 May 2008 15:18:55 +0100
Subject: leds: fix unsigned value overflow in atmel pwm driver

Fix an unsigned value overflow in the error handling code in the
Atmel PWM driver.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
---
 drivers/leds/leds-atmel-pwm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
index 28db6c1444e..52297c3ab24 100644
--- a/drivers/leds/leds-atmel-pwm.c
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -37,7 +37,7 @@ static int __init pwmled_probe(struct platform_device *pdev)
 {
 	const struct gpio_led_platform_data	*pdata;
 	struct pwmled				*leds;
-	unsigned				i;
+	int					i;
 	int					status;
 
 	pdata = pdev->dev.platform_data;
-- 
cgit v1.2.3


From 781a54e7664cc0089287a90d27086e9656ac68a1 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sat, 31 May 2008 15:23:19 +0100
Subject: leds: mark led_classdev.default_trigger as const

LED classdev core doesn't modify memory pointed by the default_trigger,
so mark it as const and we'll able to pass const char *s without getting
compiler warnings.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
---
 include/linux/leds.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/leds.h b/include/linux/leds.h
index 519df72e939..e7a5e89932f 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -48,7 +48,7 @@ struct led_classdev {
 
 	struct device		*dev;
 	struct list_head	 node;			/* LED Device list */
-	char			*default_trigger;	/* Trigger to use */
+	const char		*default_trigger;	/* Trigger to use */
 
 #ifdef CONFIG_LEDS_TRIGGERS
 	/* Protects the trigger data below */
-- 
cgit v1.2.3


From dd1160dc1842ae172495a6da274a77e35c593ed8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 9 Jun 2008 22:00:49 +0100
Subject: leds: Fix sparse warnings in leds-h1940 driver

Fixes the following sparse errors:
drivers/leds/leds-h1940.c:26:6: warning: symbol 'h1940_greenled_set' was not declared. Should it be static?
drivers/leds/leds-h1940.c:55:6: warning: symbol 'h1940_redled_set' was not declared. Should it be static?
drivers/leds/leds-h1940.c:85:6: warning: symbol 'h1940_blueled_set' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
---
 drivers/leds/leds-h1940.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index bcec4223038..73c70502168 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -23,7 +23,8 @@
 /*
  * Green led.
  */
-void h1940_greenled_set(struct led_classdev *led_dev, enum led_brightness value)
+static void h1940_greenled_set(struct led_classdev *led_dev,
+			       enum led_brightness value)
 {
 	switch (value) {
 	case LED_HALF:
@@ -52,7 +53,8 @@ static struct led_classdev h1940_greenled = {
 /*
  * Red led.
  */
-void h1940_redled_set(struct led_classdev *led_dev, enum led_brightness value)
+static void h1940_redled_set(struct led_classdev *led_dev,
+			     enum led_brightness value)
 {
 	switch (value) {
 	case LED_HALF:
@@ -82,7 +84,8 @@ static struct led_classdev h1940_redled = {
  * Blue led.
  * (it can only be blue flashing led)
  */
-void h1940_blueled_set(struct led_classdev *led_dev, enum led_brightness value)
+static void h1940_blueled_set(struct led_classdev *led_dev,
+			      enum led_brightness value)
 {
 	if (value) {
 		/* flashing Blue */
-- 
cgit v1.2.3


From f46e9203d9a100bae216cc06e17f2e77351aa8d8 Mon Sep 17 00:00:00 2001
From: Nate Case <ncase@xes-inc.com>
Date: Wed, 16 Jul 2008 22:49:55 +0100
Subject: leds: Add support for Philips PCA955x I2C LED drivers

This driver supports the PCA9550, PCA9551, PCA9552, and PCA9553
LED driver chips.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
---
 drivers/leds/Kconfig        |   8 +
 drivers/leds/Makefile       |   1 +
 drivers/leds/leds-pca955x.c | 384 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/leds.h        |  14 ++
 4 files changed, 407 insertions(+)
 create mode 100644 drivers/leds/leds-pca955x.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 1c35dfaef72..9556262dda5 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -155,6 +155,14 @@ config LEDS_CLEVO_MAIL
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-clevo-mail.
 
+config LEDS_PCA955X
+	tristate "LED Support for PCA955x I2C chips"
+	depends on LEDS_CLASS && I2C
+	help
+	  This option enables support for LEDs connected to PCA955x
+	  LED driver chips accessed via the I2C bus.  Supported
+	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 7156f9970fa..ff7982b4456 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
+obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
 
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
new file mode 100644
index 00000000000..146c0697286
--- /dev/null
+++ b/drivers/leds/leds-pca955x.c
@@ -0,0 +1,384 @@
+/*
+ * Copyright 2007-2008 Extreme Engineering Solutions, Inc.
+ *
+ * Author: Nate Case <ncase@xes-inc.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * LED driver for various PCA955x I2C LED drivers
+ *
+ * Supported devices:
+ *
+ *	Device		Description		7-bit slave address
+ *	------		-----------		-------------------
+ *	PCA9550		2-bit driver		0x60 .. 0x61
+ *	PCA9551		8-bit driver		0x60 .. 0x67
+ *	PCA9552		16-bit driver		0x60 .. 0x67
+ *	PCA9553/01	4-bit driver		0x62
+ *	PCA9553/02	4-bit driver		0x63
+ *
+ * Philips PCA955x LED driver chips follow a register map as shown below:
+ *
+ *	Control Register		Description
+ *	----------------		-----------
+ *	0x0				Input register 0
+ *					..
+ *	NUM_INPUT_REGS - 1		Last Input register X
+ *
+ *	NUM_INPUT_REGS			Frequency prescaler 0
+ *	NUM_INPUT_REGS + 1		PWM register 0
+ *	NUM_INPUT_REGS + 2		Frequency prescaler 1
+ *	NUM_INPUT_REGS + 3		PWM register 1
+ *
+ *	NUM_INPUT_REGS + 4		LED selector 0
+ *	NUM_INPUT_REGS + 4
+ *	    + NUM_LED_REGS - 1		Last LED selector
+ *
+ *  where NUM_INPUT_REGS and NUM_LED_REGS vary depending on how many
+ *  bits the chip supports.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+/* LED select registers determine the source that drives LED outputs */
+#define PCA955X_LS_LED_ON	0x0	/* Output LOW */
+#define PCA955X_LS_LED_OFF	0x1	/* Output HI-Z */
+#define PCA955X_LS_BLINK0	0x2	/* Blink at PWM0 rate */
+#define PCA955X_LS_BLINK1	0x3	/* Blink at PWM1 rate */
+
+enum pca955x_type {
+	pca9550,
+	pca9551,
+	pca9552,
+	pca9553,
+};
+
+struct pca955x_chipdef {
+	int			bits;
+	u8			slv_addr;	/* 7-bit slave address mask */
+	int			slv_addr_shift;	/* Number of bits to ignore */
+};
+
+static struct pca955x_chipdef pca955x_chipdefs[] = {
+	[pca9550] = {
+		.bits		= 2,
+		.slv_addr	= /* 110000x */ 0x60,
+		.slv_addr_shift	= 1,
+	},
+	[pca9551] = {
+		.bits		= 8,
+		.slv_addr	= /* 1100xxx */ 0x60,
+		.slv_addr_shift	= 3,
+	},
+	[pca9552] = {
+		.bits		= 16,
+		.slv_addr	= /* 1100xxx */ 0x60,
+		.slv_addr_shift	= 3,
+	},
+	[pca9553] = {
+		.bits		= 4,
+		.slv_addr	= /* 110001x */ 0x62,
+		.slv_addr_shift	= 1,
+	},
+};
+
+static const struct i2c_device_id pca955x_id[] = {
+	{ "pca9550", pca9550 },
+	{ "pca9551", pca9551 },
+	{ "pca9552", pca9552 },
+	{ "pca9553", pca9553 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pca955x_id);
+
+struct pca955x_led {
+	struct pca955x_chipdef	*chipdef;
+	struct i2c_client	*client;
+	struct work_struct	work;
+	spinlock_t		lock;
+	enum led_brightness	brightness;
+	struct led_classdev	led_cdev;
+	int			led_num;	/* 0 .. 15 potentially */
+	char			name[32];
+};
+
+/* 8 bits per input register */
+static inline int pca95xx_num_input_regs(int bits)
+{
+	return (bits + 7) / 8;
+}
+
+/* 4 bits per LED selector register */
+static inline int pca95xx_num_led_regs(int bits)
+{
+	return (bits + 3)  / 4;
+}
+
+/*
+ * Return an LED selector register value based on an existing one, with
+ * the appropriate 2-bit state value set for the given LED number (0-3).
+ */
+static inline u8 pca955x_ledsel(u8 oldval, int led_num, int state)
+{
+	return (oldval & (~(0x3 << (led_num << 1)))) |
+		((state & 0x3) << (led_num << 1));
+}
+
+/*
+ * Write to frequency prescaler register, used to program the
+ * period of the PWM output.  period = (PSCx + 1) / 38
+ */
+static void pca955x_write_psc(struct i2c_client *client, int n, u8 val)
+{
+	struct pca955x_led *pca955x = i2c_get_clientdata(client);
+
+	i2c_smbus_write_byte_data(client,
+		pca95xx_num_input_regs(pca955x->chipdef->bits) + 2*n,
+		val);
+}
+
+/*
+ * Write to PWM register, which determines the duty cycle of the
+ * output.  LED is OFF when the count is less than the value of this
+ * register, and ON when it is greater.  If PWMx == 0, LED is always OFF.
+ *
+ * Duty cycle is (256 - PWMx) / 256
+ */
+static void pca955x_write_pwm(struct i2c_client *client, int n, u8 val)
+{
+	struct pca955x_led *pca955x = i2c_get_clientdata(client);
+
+	i2c_smbus_write_byte_data(client,
+		pca95xx_num_input_regs(pca955x->chipdef->bits) + 1 + 2*n,
+		val);
+}
+
+/*
+ * Write to LED selector register, which determines the source that
+ * drives the LED output.
+ */
+static void pca955x_write_ls(struct i2c_client *client, int n, u8 val)
+{
+	struct pca955x_led *pca955x = i2c_get_clientdata(client);
+
+	i2c_smbus_write_byte_data(client,
+		pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n,
+		val);
+}
+
+/*
+ * Read the LED selector register, which determines the source that
+ * drives the LED output.
+ */
+static u8 pca955x_read_ls(struct i2c_client *client, int n)
+{
+	struct pca955x_led *pca955x = i2c_get_clientdata(client);
+
+	return (u8) i2c_smbus_read_byte_data(client,
+		pca95xx_num_input_regs(pca955x->chipdef->bits) + 4 + n);
+}
+
+static void pca955x_led_work(struct work_struct *work)
+{
+	struct pca955x_led *pca955x;
+	u8 ls;
+	int chip_ls;	/* which LSx to use (0-3 potentially) */
+	int ls_led;	/* which set of bits within LSx to use (0-3) */
+
+	pca955x = container_of(work, struct pca955x_led, work);
+	chip_ls = pca955x->led_num / 4;
+	ls_led = pca955x->led_num % 4;
+
+	ls = pca955x_read_ls(pca955x->client, chip_ls);
+
+	switch (pca955x->brightness) {
+	case LED_FULL:
+		ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_LED_ON);
+		break;
+	case LED_OFF:
+		ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_LED_OFF);
+		break;
+	case LED_HALF:
+		ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_BLINK0);
+		break;
+	default:
+		/*
+		 * Use PWM1 for all other values.  This has the unwanted
+		 * side effect of making all LEDs on the chip share the
+		 * same brightness level if set to a value other than
+		 * OFF, HALF, or FULL.  But, this is probably better than
+		 * just turning off for all other values.
+		 */
+		pca955x_write_pwm(pca955x->client, 1, 255-pca955x->brightness);
+		ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_BLINK1);
+		break;
+	}
+
+	pca955x_write_ls(pca955x->client, chip_ls, ls);
+}
+
+void pca955x_led_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+	struct pca955x_led *pca955x;
+
+	pca955x = container_of(led_cdev, struct pca955x_led, led_cdev);
+
+	spin_lock(&pca955x->lock);
+	pca955x->brightness = value;
+
+	/*
+	 * Must use workqueue for the actual I/O since I2C operations
+	 * can sleep.
+	 */
+	schedule_work(&pca955x->work);
+
+	spin_unlock(&pca955x->lock);
+}
+
+static int __devinit pca955x_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct pca955x_led *pca955x;
+	int i;
+	int err = -ENODEV;
+	struct pca955x_chipdef *chip;
+	struct i2c_adapter *adapter;
+	struct led_platform_data *pdata;
+
+	chip = &pca955x_chipdefs[id->driver_data];
+	adapter = to_i2c_adapter(client->dev.parent);
+	pdata = client->dev.platform_data;
+
+	/* Make sure the slave address / chip type combo given is possible */
+	if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) !=
+	    chip->slv_addr) {
+		dev_err(&client->dev, "invalid slave address %02x\n",
+				client->addr);
+		return -ENODEV;
+	}
+
+	printk(KERN_INFO "leds-pca955x: Using %s %d-bit LED driver at "
+			"slave address 0x%02x\n",
+			id->name, chip->bits, client->addr);
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+		return -EIO;
+
+	if (pdata) {
+		if (pdata->num_leds != chip->bits) {
+			dev_err(&client->dev, "board info claims %d LEDs"
+					" on a %d-bit chip\n",
+					pdata->num_leds, chip->bits);
+			return -ENODEV;
+		}
+	}
+
+	for (i = 0; i < chip->bits; i++) {
+		pca955x = kzalloc(sizeof(struct pca955x_led), GFP_KERNEL);
+		if (!pca955x) {
+			err = -ENOMEM;
+			goto exit;
+		}
+
+		pca955x->chipdef = chip;
+		pca955x->client = client;
+		pca955x->led_num = i;
+		/* Platform data can specify LED names and default triggers */
+		if (pdata) {
+			if (pdata->leds[i].name)
+				snprintf(pca955x->name, 32, "pca955x:%s",
+							pdata->leds[i].name);
+			if (pdata->leds[i].default_trigger)
+				pca955x->led_cdev.default_trigger =
+					pdata->leds[i].default_trigger;
+		} else {
+			snprintf(pca955x->name, 32, "pca955x:%d", i);
+		}
+		spin_lock_init(&pca955x->lock);
+
+		pca955x->led_cdev.name = pca955x->name;
+		pca955x->led_cdev.brightness_set =
+				pca955x_led_set;
+
+		/*
+		 * Client data is a pointer to the _first_ pca955x_led
+		 * struct
+		 */
+		if (i == 0)
+			i2c_set_clientdata(client, pca955x);
+
+		INIT_WORK(&(pca955x->work), pca955x_led_work);
+
+		led_classdev_register(&client->dev, &(pca955x->led_cdev));
+	}
+
+	/* Turn off LEDs */
+	for (i = 0; i < pca95xx_num_led_regs(chip->bits); i++)
+		pca955x_write_ls(client, i, 0x55);
+
+	/* PWM0 is used for half brightness or 50% duty cycle */
+	pca955x_write_pwm(client, 0, 255-LED_HALF);
+
+	/* PWM1 is used for variable brightness, default to OFF */
+	pca955x_write_pwm(client, 1, 0);
+
+	/* Set to fast frequency so we do not see flashing */
+	pca955x_write_psc(client, 0, 0);
+	pca955x_write_psc(client, 1, 0);
+
+	return 0;
+exit:
+	return err;
+}
+
+static int __devexit pca955x_remove(struct i2c_client *client)
+{
+	struct pca955x_led *pca955x = i2c_get_clientdata(client);
+	int leds = pca955x->chipdef->bits;
+	int i;
+
+	for (i = 0; i < leds; i++) {
+		led_classdev_unregister(&(pca955x->led_cdev));
+		cancel_work_sync(&(pca955x->work));
+		kfree(pca955x);
+		pca955x = pca955x + 1;
+	}
+
+	return 0;
+}
+
+static struct i2c_driver pca955x_driver = {
+	.driver = {
+		.name	= "leds-pca955x",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= pca955x_probe,
+	.remove	= __devexit_p(pca955x_remove),
+	.id_table = pca955x_id,
+};
+
+static int __init pca955x_leds_init(void)
+{
+	return i2c_add_driver(&pca955x_driver);
+}
+
+static void __exit pca955x_leds_exit(void)
+{
+	i2c_del_driver(&pca955x_driver);
+}
+
+module_init(pca955x_leds_init);
+module_exit(pca955x_leds_exit);
+
+MODULE_AUTHOR("Nate Case <ncase@xes-inc.com>");
+MODULE_DESCRIPTION("PCA955x LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/leds.h b/include/linux/leds.h
index e7a5e89932f..d41ccb56146 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -118,6 +118,20 @@ extern void ledtrig_ide_activity(void);
 #define ledtrig_ide_activity() do {} while(0)
 #endif
 
+/*
+ * Generic LED platform data for describing LED names and default triggers.
+ */
+struct led_info {
+	const char	*name;
+	char		*default_trigger;
+	int		flags;
+};
+
+struct led_platform_data {
+	int		num_leds;
+	struct led_info	*leds;
+};
+
 /* For the leds-gpio driver */
 struct gpio_led {
 	const char *name;
-- 
cgit v1.2.3


From fe3025b55c8ed06929afe94e9c9095fc19d15aa0 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 16 Jul 2008 22:51:14 +0100
Subject: leds: Ensure led->trigger is set earlier

Make sure led->trigger is valid before calling trigger->activate

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
---
 drivers/leds/led-triggers.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 0f242b3f09b..f910eaffe3a 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -111,16 +111,17 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger)
 			flags);
 		if (led_cdev->trigger->deactivate)
 			led_cdev->trigger->deactivate(led_cdev);
+		led_cdev->trigger = NULL;
 		led_set_brightness(led_cdev, LED_OFF);
 	}
 	if (trigger) {
 		write_lock_irqsave(&trigger->leddev_list_lock, flags);
 		list_add_tail(&led_cdev->trig_list, &trigger->led_cdevs);
 		write_unlock_irqrestore(&trigger->leddev_list_lock, flags);
+		led_cdev->trigger = trigger;
 		if (trigger->activate)
 			trigger->activate(led_cdev);
 	}
-	led_cdev->trigger = trigger;
 }
 EXPORT_SYMBOL_GPL(led_trigger_set);
 
-- 
cgit v1.2.3


From 7be35c72e6454059a33ad844153349973d22fcb7 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg@redhat.com>
Date: Mon, 9 Jun 2008 21:56:16 +0100
Subject: backlight: Add Nvidia-based Apple Macbook Pro backlight driver

Nvidia-based Apple Macbook Pros don't appear to handle backlight control
through the graphics card registers or ACPI, but instead trigger changes
via SMI calls. This driver registers a generic backlight device that
lets existing userspace deal with it. Code derived from Julien Blache's
Pommed application.

Signed-off-by: Julien Blache <jb@jblache.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
---
 drivers/video/backlight/Kconfig         |   9 +++
 drivers/video/backlight/Makefile        |   2 +
 drivers/video/backlight/mbp_nvidia_bl.c | 116 ++++++++++++++++++++++++++++++++
 3 files changed, 127 insertions(+)
 create mode 100644 drivers/video/backlight/mbp_nvidia_bl.c

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 30bf7f2f163..62547bd2ea4 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -119,3 +119,12 @@ config BACKLIGHT_PWM
 	help
 	  If you have a LCD backlight adjustable by PWM, say Y to enable
 	  this driver.
+
+config BACKLIGHT_MBP_NVIDIA
+       tristate "MacBook Pro Nvidia Backlight Driver"
+       depends on BACKLIGHT_CLASS_DEVICE && X86
+       default n
+       help
+         If you have an Apple Macbook Pro with Nvidia graphics hardware say Y
+	 to enable a driver for its backlight
+
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b51a7cd1250..c7c4d95fdc1 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -11,3 +11,5 @@ obj-$(CONFIG_BACKLIGHT_OMAP1)	+= omap1_bl.o
 obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
 obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
 obj-$(CONFIG_BACKLIGHT_PWM)	+= pwm_bl.o
+obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
+
diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c
new file mode 100644
index 00000000000..385cba40ea8
--- /dev/null
+++ b/drivers/video/backlight/mbp_nvidia_bl.c
@@ -0,0 +1,116 @@
+/*
+ *  Backlight Driver for Nvidia 8600 in Macbook Pro
+ *
+ *  Copyright (c) Red Hat <mjg@redhat.com>
+ *  Based on code from Pommed:
+ *  Copyright (C) 2006 Nicolas Boichat <nicolas @boichat.ch>
+ *  Copyright (C) 2006 Felipe Alfaro Solana <felipe_alfaro @linuxmail.org>
+ *  Copyright (C) 2007 Julien BLACHE <jb@jblache.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This driver triggers SMIs which cause the firmware to change the
+ *  backlight brightness. This is icky in many ways, but it's impractical to
+ *  get at the firmware code in order to figure out what it's actually doing.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/dmi.h>
+#include <linux/io.h>
+
+static struct backlight_device *mbp_backlight_device;
+
+static struct dmi_system_id __initdata mbp_device_table[] = {
+	{
+		.ident = "3,1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
+		},
+	},
+	{
+		.ident = "3,2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,2"),
+		},
+	},
+	{
+		.ident = "4,1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro4,1"),
+		},
+	},
+	{ }
+};
+
+static int mbp_send_intensity(struct backlight_device *bd)
+{
+	int intensity = bd->props.brightness;
+
+	outb(0x04 | (intensity << 4), 0xb3);
+	outb(0xbf, 0xb2);
+
+	return 0;
+}
+
+static int mbp_get_intensity(struct backlight_device *bd)
+{
+	outb(0x03, 0xb3);
+	outb(0xbf, 0xb2);
+	return inb(0xb3) >> 4;
+}
+
+static struct backlight_ops mbp_ops = {
+	.get_brightness = mbp_get_intensity,
+	.update_status  = mbp_send_intensity,
+};
+
+static int __init mbp_init(void)
+{
+	if (!dmi_check_system(mbp_device_table))
+		return -ENODEV;
+
+	if (!request_region(0xb2, 2, "Macbook Pro backlight"))
+		return -ENXIO;
+
+	mbp_backlight_device = backlight_device_register("mbp_backlight",
+							 NULL, NULL,
+							 &mbp_ops);
+	if (IS_ERR(mbp_backlight_device)) {
+		release_region(0xb2, 2);
+		return PTR_ERR(mbp_backlight_device);
+	}
+
+	mbp_backlight_device->props.max_brightness = 15;
+	mbp_backlight_device->props.brightness =
+		mbp_get_intensity(mbp_backlight_device);
+	backlight_update_status(mbp_backlight_device);
+
+	return 0;
+}
+
+static void __exit mbp_exit(void)
+{
+	backlight_device_unregister(mbp_backlight_device);
+
+	release_region(0xb2, 2);
+}
+
+module_init(mbp_init);
+module_exit(mbp_exit);
+
+MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
+MODULE_DESCRIPTION("Nvidia-based Macbook Pro Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("svnAppleInc.:pnMacBookPro3,1");
+MODULE_ALIAS("svnAppleInc.:pnMacBookPro3,2");
+MODULE_ALIAS("svnAppleInc.:pnMacBookPro4,1");
-- 
cgit v1.2.3


From f6ec2d96796d0accda6c325890206f3629130729 Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Wed, 16 Jul 2008 23:05:49 +0100
Subject: backlight: Fix missing kernel doc entry

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
---
 drivers/video/backlight/backlight.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 39394757679..fab0bc874b5 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -191,6 +191,7 @@ static struct device_attribute bl_device_attributes[] = {
  *   backlight_device class.
  * @name: the name of the new object(must be the same as the name of the
  *   respective framebuffer device).
+ * @parent: a pointer to the parent device
  * @devdata: an optional pointer to be stored for private driver use. The
  *   methods may retrieve it by using bl_get_data(bd).
  * @ops: the backlight operations structure.
-- 
cgit v1.2.3


From 422037bafde8083acc3c539ceba3dfc60a04110c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 23 Jul 2008 11:16:38 +0200
Subject: sched: fix hrtick & generic-ipi dependency

Andrew Morton reported this s390 allmodconfig build failure:

 kernel/built-in.o: In function `hrtick_start_fair':
 sched.c:(.text+0x69c6): undefined reference to `__smp_call_function_single'

the reason is that s390 is not a generic-ipi SMP platform yet, while
the hrtick code relies on it. Fix the dependency.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/Kconfig.hz | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/Kconfig.hz b/kernel/Kconfig.hz
index 2a202a84675..382dd5a8b2d 100644
--- a/kernel/Kconfig.hz
+++ b/kernel/Kconfig.hz
@@ -55,4 +55,4 @@ config HZ
 	default 1000 if HZ_1000
 
 config SCHED_HRTICK
-	def_bool HIGH_RES_TIMERS
+	def_bool HIGH_RES_TIMERS && USE_GENERIC_SMP_HELPERS
-- 
cgit v1.2.3


From 36bd53d07243ae83c1b73bae549086cea2252854 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 23 Jul 2008 00:58:13 -0700
Subject: arch/mips/kernel/stacktrace.c: Heiko can't type

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/mips/kernel/stacktrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 702e2e92a1c..0632e2a849c 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -7,7 +7,7 @@
  */
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
-#include <linux/module.h
+#include <linux/module.h>
 #include <asm/stacktrace.h>
 
 /*
-- 
cgit v1.2.3


From 4fe16897c59882420d66f2d503106653d026ed6c Mon Sep 17 00:00:00 2001
From: Karl Beldan <karl.beldan@gmail.com>
Date: Wed, 16 Jul 2008 18:29:11 +0200
Subject: pxamci: trivial fix of DMA alignment register bit clearing

Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/pxamci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index d39f5973886..a8e18fe5307 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -177,7 +177,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 	if (dalgn)
 		DALGN |= (1 << host->dma);
 	else
-		DALGN &= (1 << host->dma);
+		DALGN &= ~(1 << host->dma);
 	DDADR(host->dma) = host->sg_dma;
 	DCSR(host->dma) = DCSR_RUN;
 }
-- 
cgit v1.2.3


From d2f2761bb75ee365077b52c7e73a6e5164d3efa0 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 17 Jul 2008 11:54:01 +0100
Subject: s3cmci: fixes for section mismatch warnings

Fix the naming of various functions in the s3cmc
driver to stop triggering section mismatch warnings.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/s3cmci.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 6a1e4994b72..8904bb39df6 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1355,17 +1355,17 @@ static int __devexit s3cmci_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devinit s3cmci_probe_2410(struct platform_device *dev)
+static int __devinit s3cmci_2410_probe(struct platform_device *dev)
 {
 	return s3cmci_probe(dev, 0);
 }
 
-static int __devinit s3cmci_probe_2412(struct platform_device *dev)
+static int __devinit s3cmci_2412_probe(struct platform_device *dev)
 {
 	return s3cmci_probe(dev, 1);
 }
 
-static int __devinit s3cmci_probe_2440(struct platform_device *dev)
+static int __devinit s3cmci_2440_probe(struct platform_device *dev)
 {
 	return s3cmci_probe(dev, 1);
 }
@@ -1392,28 +1392,28 @@ static int s3cmci_resume(struct platform_device *dev)
 #endif /* CONFIG_PM */
 
 
-static struct platform_driver s3cmci_driver_2410 = {
+static struct platform_driver s3cmci_2410_driver = {
 	.driver.name	= "s3c2410-sdi",
 	.driver.owner	= THIS_MODULE,
-	.probe		= s3cmci_probe_2410,
+	.probe		= s3cmci_2410_probe,
 	.remove		= __devexit_p(s3cmci_remove),
 	.suspend	= s3cmci_suspend,
 	.resume		= s3cmci_resume,
 };
 
-static struct platform_driver s3cmci_driver_2412 = {
+static struct platform_driver s3cmci_2412_driver = {
 	.driver.name	= "s3c2412-sdi",
 	.driver.owner	= THIS_MODULE,
-	.probe		= s3cmci_probe_2412,
+	.probe		= s3cmci_2412_probe,
 	.remove		= __devexit_p(s3cmci_remove),
 	.suspend	= s3cmci_suspend,
 	.resume		= s3cmci_resume,
 };
 
-static struct platform_driver s3cmci_driver_2440 = {
+static struct platform_driver s3cmci_2440_driver = {
 	.driver.name	= "s3c2440-sdi",
 	.driver.owner	= THIS_MODULE,
-	.probe		= s3cmci_probe_2440,
+	.probe		= s3cmci_2440_probe,
 	.remove		= __devexit_p(s3cmci_remove),
 	.suspend	= s3cmci_suspend,
 	.resume		= s3cmci_resume,
@@ -1422,17 +1422,17 @@ static struct platform_driver s3cmci_driver_2440 = {
 
 static int __init s3cmci_init(void)
 {
-	platform_driver_register(&s3cmci_driver_2410);
-	platform_driver_register(&s3cmci_driver_2412);
-	platform_driver_register(&s3cmci_driver_2440);
+	platform_driver_register(&s3cmci_2410_driver);
+	platform_driver_register(&s3cmci_2412_driver);
+	platform_driver_register(&s3cmci_2440_driver);
 	return 0;
 }
 
 static void __exit s3cmci_exit(void)
 {
-	platform_driver_unregister(&s3cmci_driver_2410);
-	platform_driver_unregister(&s3cmci_driver_2412);
-	platform_driver_unregister(&s3cmci_driver_2440);
+	platform_driver_unregister(&s3cmci_2410_driver);
+	platform_driver_unregister(&s3cmci_2412_driver);
+	platform_driver_unregister(&s3cmci_2440_driver);
 }
 
 module_init(s3cmci_init);
-- 
cgit v1.2.3


From dd8572af68229a65b6716b286395ad7f5e2ecc48 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Thu, 17 Jul 2008 13:07:28 +0200
Subject: au1xmmc: suspend/resume implementation

Basic suspend/resume support: disable peripheral on suspend and
reinit on resume.

Tested on Au1200.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/au1xmmc.c | 54 +++++++++++++++++++++++++++++++++++-----------
 1 file changed, 42 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 3f15eb20489..99b20917cc0 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -1043,7 +1043,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
 		goto out6;
 	}
 
-	platform_set_drvdata(pdev, mmc);
+	platform_set_drvdata(pdev, host);
 
 	printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X"
 		" (mode=%s)\n", pdev->id, host->iobase,
@@ -1087,13 +1087,10 @@ out0:
 
 static int __devexit au1xmmc_remove(struct platform_device *pdev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(pdev);
-	struct au1xmmc_host *host;
-
-	if (mmc) {
-		host  = mmc_priv(mmc);
+	struct au1xmmc_host *host = platform_get_drvdata(pdev);
 
-		mmc_remove_host(mmc);
+	if (host) {
+		mmc_remove_host(host->mmc);
 
 #ifdef CONFIG_LEDS_CLASS
 		if (host->platdata && host->platdata->led)
@@ -1101,8 +1098,8 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev)
 #endif
 
 		if (host->platdata && host->platdata->cd_setup &&
-		    !(mmc->caps & MMC_CAP_NEEDS_POLL))
-			host->platdata->cd_setup(mmc, 0);
+		    !(host->mmc->caps & MMC_CAP_NEEDS_POLL))
+			host->platdata->cd_setup(host->mmc, 0);
 
 		au_writel(0, HOST_ENABLE(host));
 		au_writel(0, HOST_CONFIG(host));
@@ -1122,16 +1119,49 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev)
 		release_resource(host->ioarea);
 		kfree(host->ioarea);
 
-		mmc_free_host(mmc);
+		mmc_free_host(host->mmc);
+		platform_set_drvdata(pdev, NULL);
 	}
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int au1xmmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct au1xmmc_host *host = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = mmc_suspend_host(host->mmc, state);
+	if (ret)
+		return ret;
+
+	au_writel(0, HOST_CONFIG2(host));
+	au_writel(0, HOST_CONFIG(host));
+	au_writel(0xffffffff, HOST_STATUS(host));
+	au_writel(0, HOST_ENABLE(host));
+	au_sync();
+
+	return 0;
+}
+
+static int au1xmmc_resume(struct platform_device *pdev)
+{
+	struct au1xmmc_host *host = platform_get_drvdata(pdev);
+
+	au1xmmc_reset_controller(host);
+
+	return mmc_resume_host(host->mmc);
+}
+#else
+#define au1xmmc_suspend NULL
+#define au1xmmc_resume NULL
+#endif
+
 static struct platform_driver au1xmmc_driver = {
 	.probe         = au1xmmc_probe,
 	.remove        = au1xmmc_remove,
-	.suspend       = NULL,
-	.resume        = NULL,
+	.suspend       = au1xmmc_suspend,
+	.resume        = au1xmmc_resume,
 	.driver        = {
 		.name  = DRIVER_NAME,
 		.owner = THIS_MODULE,
-- 
cgit v1.2.3


From 907b2cd6dbbdfd6a4be7908f57b1498dfabc880e Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 17 Jul 2008 15:32:54 +0100
Subject: s3cmci: ensure host stopped on machine shutdown

Ensure that the s3cmci host controller is turned off
when the machine is shutdown, otherwise we end up
leaving the card powered and processing insertion and
removal events after the system prints "System halted."

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/s3cmci.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 8904bb39df6..be550c26da6 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1331,21 +1331,30 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 	return ret;
 }
 
+static void s3cmci_shutdown(struct platform_device *pdev)
+{
+	struct mmc_host	*mmc = platform_get_drvdata(pdev);
+	struct s3cmci_host *host = mmc_priv(mmc);
+
+	if (host->irq_cd >= 0)
+		free_irq(host->irq_cd, host);
+
+	mmc_remove_host(mmc);
+	clk_disable(host->clk);
+}
+
 static int __devexit s3cmci_remove(struct platform_device *pdev)
 {
 	struct mmc_host		*mmc  = platform_get_drvdata(pdev);
 	struct s3cmci_host	*host = mmc_priv(mmc);
 
-	mmc_remove_host(mmc);
+	s3cmci_shutdown(pdev);
 
-	clk_disable(host->clk);
 	clk_put(host->clk);
 
 	tasklet_disable(&host->pio_tasklet);
 	s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client);
 
-	if (host->irq_cd >= 0)
-		free_irq(host->irq_cd, host);
 	free_irq(host->irq, host);
 
 	iounmap(host->base);
@@ -1397,6 +1406,7 @@ static struct platform_driver s3cmci_2410_driver = {
 	.driver.owner	= THIS_MODULE,
 	.probe		= s3cmci_2410_probe,
 	.remove		= __devexit_p(s3cmci_remove),
+	.shutdown	= s3cmci_shutdown,
 	.suspend	= s3cmci_suspend,
 	.resume		= s3cmci_resume,
 };
@@ -1406,6 +1416,7 @@ static struct platform_driver s3cmci_2412_driver = {
 	.driver.owner	= THIS_MODULE,
 	.probe		= s3cmci_2412_probe,
 	.remove		= __devexit_p(s3cmci_remove),
+	.shutdown	= s3cmci_shutdown,
 	.suspend	= s3cmci_suspend,
 	.resume		= s3cmci_resume,
 };
@@ -1415,6 +1426,7 @@ static struct platform_driver s3cmci_2440_driver = {
 	.driver.owner	= THIS_MODULE,
 	.probe		= s3cmci_2440_probe,
 	.remove		= __devexit_p(s3cmci_remove),
+	.shutdown	= s3cmci_shutdown,
 	.suspend	= s3cmci_suspend,
 	.resume		= s3cmci_resume,
 };
-- 
cgit v1.2.3


From 2661081f5ab9cb25359d27f88707a018cf4e68e9 Mon Sep 17 00:00:00 2001
From: Pierre Ossman <drzeus@drzeus.cx>
Date: Fri, 4 Jul 2008 18:17:13 +0200
Subject: mmc_test: highmem tests

Add a couple of tests to make sure the host driver handles highmem
memory pages properly. Unfortunately there is no way to guarantee an
allocation below 4 GB in i386, so it might give you addresses that
are out of reach for the hardware (OTOH, so will any other highmem
allocation in the kernel).

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/card/mmc_test.c | 138 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 137 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index d6b9b486417..6fc13d4c634 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -21,13 +21,17 @@
 #define RESULT_UNSUP_HOST	2
 #define RESULT_UNSUP_CARD	3
 
-#define BUFFER_SIZE	(PAGE_SIZE * 4)
+#define BUFFER_ORDER		2
+#define BUFFER_SIZE		(PAGE_SIZE << BUFFER_ORDER)
 
 struct mmc_test_card {
 	struct mmc_card	*card;
 
 	u8		scratch[BUFFER_SIZE];
 	u8		*buffer;
+#ifdef CONFIG_HIGHMEM
+	struct page	*highmem;
+#endif
 };
 
 /*******************************************************************/
@@ -799,6 +803,94 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test)
 	return 0;
 }
 
+#ifdef CONFIG_HIGHMEM
+
+static int mmc_test_write_high(struct mmc_test_card *test)
+{
+	int ret;
+	struct scatterlist sg;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, test->highmem, 512, 0);
+
+	ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mmc_test_read_high(struct mmc_test_card *test)
+{
+	int ret;
+	struct scatterlist sg;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, test->highmem, 512, 0);
+
+	ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mmc_test_multi_write_high(struct mmc_test_card *test)
+{
+	int ret;
+	unsigned int size;
+	struct scatterlist sg;
+
+	if (test->card->host->max_blk_count == 1)
+		return RESULT_UNSUP_HOST;
+
+	size = PAGE_SIZE * 2;
+	size = min(size, test->card->host->max_req_size);
+	size = min(size, test->card->host->max_seg_size);
+	size = min(size, test->card->host->max_blk_count * 512);
+
+	if (size < 1024)
+		return RESULT_UNSUP_HOST;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, test->highmem, size, 0);
+
+	ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mmc_test_multi_read_high(struct mmc_test_card *test)
+{
+	int ret;
+	unsigned int size;
+	struct scatterlist sg;
+
+	if (test->card->host->max_blk_count == 1)
+		return RESULT_UNSUP_HOST;
+
+	size = PAGE_SIZE * 2;
+	size = min(size, test->card->host->max_req_size);
+	size = min(size, test->card->host->max_seg_size);
+	size = min(size, test->card->host->max_blk_count * 512);
+
+	if (size < 1024)
+		return RESULT_UNSUP_HOST;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, test->highmem, size, 0);
+
+	ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+#endif /* CONFIG_HIGHMEM */
+
 static const struct mmc_test_case mmc_test_cases[] = {
 	{
 		.name = "Basic write (no data verification)",
@@ -913,6 +1005,39 @@ static const struct mmc_test_case mmc_test_cases[] = {
 		.name = "Correct xfer_size at read (midway failure)",
 		.run = mmc_test_multi_xfersize_read,
 	},
+
+#ifdef CONFIG_HIGHMEM
+
+	{
+		.name = "Highmem write",
+		.prepare = mmc_test_prepare_write,
+		.run = mmc_test_write_high,
+		.cleanup = mmc_test_cleanup,
+	},
+
+	{
+		.name = "Highmem read",
+		.prepare = mmc_test_prepare_read,
+		.run = mmc_test_read_high,
+		.cleanup = mmc_test_cleanup,
+	},
+
+	{
+		.name = "Multi-block highmem write",
+		.prepare = mmc_test_prepare_write,
+		.run = mmc_test_multi_write_high,
+		.cleanup = mmc_test_cleanup,
+	},
+
+	{
+		.name = "Multi-block highmem read",
+		.prepare = mmc_test_prepare_read,
+		.run = mmc_test_multi_read_high,
+		.cleanup = mmc_test_cleanup,
+	},
+
+#endif /* CONFIG_HIGHMEM */
+
 };
 
 static struct mutex mmc_test_lock;
@@ -1014,12 +1139,23 @@ static ssize_t mmc_test_store(struct device *dev,
 	test->card = card;
 
 	test->buffer = kzalloc(BUFFER_SIZE, GFP_KERNEL);
+#ifdef CONFIG_HIGHMEM
+	test->highmem = alloc_pages(GFP_KERNEL | __GFP_HIGHMEM, BUFFER_ORDER);
+#endif
+
+#ifdef CONFIG_HIGHMEM
+	if (test->buffer && test->highmem) {
+#else
 	if (test->buffer) {
+#endif
 		mutex_lock(&mmc_test_lock);
 		mmc_test_run(test, testcase);
 		mutex_unlock(&mmc_test_lock);
 	}
 
+#ifdef CONFIG_HIGHMEM
+	__free_pages(test->highmem, BUFFER_ORDER);
+#endif
 	kfree(test->buffer);
 	kfree(test);
 
-- 
cgit v1.2.3


From 48b5352ea1891455eb8e824cf7d92f66931a090f Mon Sep 17 00:00:00 2001
From: Pierre Ossman <drzeus@drzeus.cx>
Date: Mon, 21 Jul 2008 00:14:52 +0200
Subject: mmc_test: test oversized sg lists

Add tests that make sure the driver properly checks the blocks and
blksz fields and doesn't assume the sg list has a size that perfectly
matches the current request.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/card/mmc_test.c | 85 +++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 82 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 6fc13d4c634..25296011df5 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -388,14 +388,16 @@ static int mmc_test_transfer(struct mmc_test_card *test,
 	int ret, i;
 	unsigned long flags;
 
+	BUG_ON(blocks * blksz > BUFFER_SIZE);
+
 	if (write) {
 		for (i = 0;i < blocks * blksz;i++)
 			test->scratch[i] = i;
 	} else {
-		memset(test->scratch, 0, BUFFER_SIZE);
+		memset(test->scratch, 0, blocks * blksz);
 	}
 	local_irq_save(flags);
-	sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
+	sg_copy_from_buffer(sg, sg_len, test->scratch, blocks * blksz);
 	local_irq_restore(flags);
 
 	ret = mmc_test_set_blksize(test, blksz);
@@ -442,7 +444,7 @@ static int mmc_test_transfer(struct mmc_test_card *test,
 		}
 	} else {
 		local_irq_save(flags);
-		sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
+		sg_copy_to_buffer(sg, sg_len, test->scratch, blocks * blksz);
 		local_irq_restore(flags);
 		for (i = 0;i < blocks * blksz;i++) {
 			if (test->scratch[i] != (u8)i)
@@ -803,6 +805,69 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test)
 	return 0;
 }
 
+static int mmc_test_bigsg_write(struct mmc_test_card *test)
+{
+	int ret;
+	unsigned int size;
+	struct scatterlist sg;
+
+	if (test->card->host->max_blk_count == 1)
+		return RESULT_UNSUP_HOST;
+
+	size = PAGE_SIZE * 2;
+	size = min(size, test->card->host->max_req_size);
+	size = min(size, test->card->host->max_seg_size);
+	size = min(size, test->card->host->max_blk_count * 512);
+
+	memset(test->buffer, 0, BUFFER_SIZE);
+
+	if (size < 1024)
+		return RESULT_UNSUP_HOST;
+
+	sg_init_table(&sg, 1);
+	sg_init_one(&sg, test->buffer, BUFFER_SIZE);
+
+	ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mmc_test_bigsg_read(struct mmc_test_card *test)
+{
+	int ret, i;
+	unsigned int size;
+	struct scatterlist sg;
+
+	if (test->card->host->max_blk_count == 1)
+		return RESULT_UNSUP_HOST;
+
+	size = PAGE_SIZE * 2;
+	size = min(size, test->card->host->max_req_size);
+	size = min(size, test->card->host->max_seg_size);
+	size = min(size, test->card->host->max_blk_count * 512);
+
+	if (size < 1024)
+		return RESULT_UNSUP_HOST;
+
+	memset(test->buffer, 0xCD, BUFFER_SIZE);
+
+	sg_init_table(&sg, 1);
+	sg_init_one(&sg, test->buffer, BUFFER_SIZE);
+	ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
+	if (ret)
+		return ret;
+
+	/* mmc_test_transfer() doesn't check for read overflows */
+	for (i = size;i < BUFFER_SIZE;i++) {
+		if (test->buffer[i] != 0xCD)
+			return RESULT_FAIL;
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_HIGHMEM
 
 static int mmc_test_write_high(struct mmc_test_card *test)
@@ -1006,6 +1071,20 @@ static const struct mmc_test_case mmc_test_cases[] = {
 		.run = mmc_test_multi_xfersize_read,
 	},
 
+	{
+		.name = "Over-sized SG list write",
+		.prepare = mmc_test_prepare_write,
+		.run = mmc_test_bigsg_write,
+		.cleanup = mmc_test_cleanup,
+	},
+
+	{
+		.name = "Over-sized SG list read",
+		.prepare = mmc_test_prepare_read,
+		.run = mmc_test_bigsg_read,
+		.cleanup = mmc_test_cleanup,
+	},
+
 #ifdef CONFIG_HIGHMEM
 
 	{
-- 
cgit v1.2.3


From 6cefd05f35177ad5d22d44519c680cf43f2ac86d Mon Sep 17 00:00:00 2001
From: Pierre Ossman <drzeus@drzeus.cx>
Date: Mon, 21 Jul 2008 00:45:15 +0200
Subject: sdhci: add warnings for bad buffers in ADMA path

The ADMA code path assumes that the 3 byte alignment fix doesn't cross
a page boundary. I'm not convinced this is worth supporting, but at
least print a warning in the off chance we'll actually see such a request.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/sdhci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 17701c3da73..b27c1a28a7c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -389,6 +389,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 		if (offset) {
 			if (data->flags & MMC_DATA_WRITE) {
 				buffer = sdhci_kmap_atomic(sg, &flags);
+				WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
 				memcpy(align, buffer, offset);
 				sdhci_kunmap_atomic(buffer, &flags);
 			}
@@ -510,6 +511,7 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
 				size = 4 - (sg_dma_address(sg) & 0x3);
 
 				buffer = sdhci_kmap_atomic(sg, &flags);
+				WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
 				memcpy(buffer, align, size);
 				sdhci_kunmap_atomic(buffer, &flags);
 
-- 
cgit v1.2.3


From 719a61b452ff74cf81a96e4212748d9d63bcc924 Mon Sep 17 00:00:00 2001
From: Pierre Ossman <drzeus@drzeus.cx>
Date: Tue, 22 Jul 2008 13:23:23 +0200
Subject: sdhci: fix bad warning from commit c8b3e02

Commit c8b3e02 renamed a variable, but missed one reference to it
inside a WARN_ON, causing it to incorrectly trigger.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/sdhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index b27c1a28a7c..8b1f412144c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -689,7 +689,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 				WARN_ON(1);
 				host->flags &= ~SDHCI_USE_DMA;
 			} else {
-				WARN_ON(count != 1);
+				WARN_ON(sg_cnt != 1);
 				writel(sg_dma_address(data->sg),
 					host->ioaddr + SDHCI_DMA_ADDRESS);
 			}
-- 
cgit v1.2.3


From 2ff1fa679115e3c8c78ad74ad8fd2d7fd87ae4e7 Mon Sep 17 00:00:00 2001
From: Pierre Ossman <drzeus@drzeus.cx>
Date: Tue, 22 Jul 2008 14:35:42 +0200
Subject: mmc_block: bounce buffer highmem support

Support highmem pages in the bounce buffer code by using the
sg_copy_from/to_buffer() functions.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/card/queue.c | 97 ++++++++++++++++--------------------------------
 1 file changed, 31 insertions(+), 66 deletions(-)

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 7731ddefdc1..3dee97e7d16 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -148,7 +148,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
 			printk(KERN_WARNING "%s: unable to allocate "
 				"bounce buffer\n", mmc_card_name(card));
 		} else {
-			blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_HIGH);
+			blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
 			blk_queue_max_sectors(mq->queue, bouncesz / 512);
 			blk_queue_max_phys_segments(mq->queue, bouncesz / 512);
 			blk_queue_max_hw_segments(mq->queue, bouncesz / 512);
@@ -290,55 +290,15 @@ void mmc_queue_resume(struct mmc_queue *mq)
 	}
 }
 
-static void copy_sg(struct scatterlist *dst, unsigned int dst_len,
-	struct scatterlist *src, unsigned int src_len)
-{
-	unsigned int chunk;
-	char *dst_buf, *src_buf;
-	unsigned int dst_size, src_size;
-
-	dst_buf = NULL;
-	src_buf = NULL;
-	dst_size = 0;
-	src_size = 0;
-
-	while (src_len) {
-		BUG_ON(dst_len == 0);
-
-		if (dst_size == 0) {
-			dst_buf = sg_virt(dst);
-			dst_size = dst->length;
-		}
-
-		if (src_size == 0) {
-			src_buf = sg_virt(src);
-			src_size = src->length;
-		}
-
-		chunk = min(dst_size, src_size);
-
-		memcpy(dst_buf, src_buf, chunk);
-
-		dst_buf += chunk;
-		src_buf += chunk;
-		dst_size -= chunk;
-		src_size -= chunk;
-
-		if (dst_size == 0) {
-			dst++;
-			dst_len--;
-		}
-
-		if (src_size == 0) {
-			src++;
-			src_len--;
-		}
-	}
-}
-
+/*
+ * Prepare the sg list(s) to be handed of to the host driver
+ */
 unsigned int mmc_queue_map_sg(struct mmc_queue *mq)
 {
 	unsigned int sg_len;
+	size_t buflen;
+	struct scatterlist *sg;
+	int i;
 
 	if (!mq->bounce_buf)
 		return blk_rq_map_sg(mq->queue, mq->req, mq->sg);
@@ -349,47 +309,52 @@ unsigned int mmc_queue_map_sg(struct mmc_queue *mq)
 
 	mq->bounce_sg_len = sg_len;
 
-	/*
-	 * Shortcut in the event we only get a single entry.
-	 */
-	if (sg_len == 1) {
-		memcpy(mq->sg, mq->bounce_sg, sizeof(struct scatterlist));
-		return 1;
-	}
+	buflen = 0;
+	for_each_sg(mq->bounce_sg, sg, sg_len, i)
+		buflen += sg->length;
 
-	sg_init_one(mq->sg, mq->bounce_buf, 0);
-
-	while (sg_len) {
-		mq->sg[0].length += mq->bounce_sg[sg_len - 1].length;
-		sg_len--;
-	}
+	sg_init_one(mq->sg, mq->bounce_buf, buflen);
 
 	return 1;
 }
 
+/*
+ * If writing, bounce the data to the buffer before the request
+ * is sent to the host driver
+ */
 void mmc_queue_bounce_pre(struct mmc_queue *mq)
 {
+	unsigned long flags;
+
 	if (!mq->bounce_buf)
 		return;
 
-	if (mq->bounce_sg_len == 1)
-		return;
 	if (rq_data_dir(mq->req) != WRITE)
 		return;
 
-	copy_sg(mq->sg, 1, mq->bounce_sg, mq->bounce_sg_len);
+	local_irq_save(flags);
+	sg_copy_to_buffer(mq->bounce_sg, mq->bounce_sg_len,
+		mq->bounce_buf, mq->sg[0].length);
+	local_irq_restore(flags);
 }
 
+/*
+ * If reading, bounce the data from the buffer after the request
+ * has been handled by the host driver
+ */
 void mmc_queue_bounce_post(struct mmc_queue *mq)
 {
+	unsigned long flags;
+
 	if (!mq->bounce_buf)
 		return;
 
-	if (mq->bounce_sg_len == 1)
-		return;
 	if (rq_data_dir(mq->req) != READ)
 		return;
 
-	copy_sg(mq->bounce_sg, mq->bounce_sg_len, mq->sg, 1);
+	local_irq_save(flags);
+	sg_copy_from_buffer(mq->bounce_sg, mq->bounce_sg_len,
+		mq->bounce_buf, mq->sg[0].length);
+	local_irq_restore(flags);
 }
 
-- 
cgit v1.2.3


From 6d79947a2d34470311012c3ee45ad33650a7f192 Mon Sep 17 00:00:00 2001
From: Pierre Ossman <drzeus@drzeus.cx>
Date: Tue, 22 Jul 2008 14:36:57 +0200
Subject: mmc: Remove Russell as primecell mci maintainer

Russell no longer has the resources to fully test the controller, so
he is stepping down as maintainer.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 MAINTAINERS | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 0652ab384d5..f4d78211000 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -441,10 +441,7 @@ M:	spyro@f2s.com
 S:	Maintained
 
 ARM PRIMECELL MMCI PL180/1 DRIVER
-P:	Russell King
-M:	rmk@arm.linux.org.uk
-L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-S:	Maintained
+S:	Orphan
 
 ARM/ADI ROADRUNNER MACHINE SUPPORT
 P:	Lennert Buytenhek
-- 
cgit v1.2.3


From 60c9c7b1d91396f511e55a2a5be13d148dcf66ff Mon Sep 17 00:00:00 2001
From: Pierre Ossman <drzeus@drzeus.cx>
Date: Tue, 22 Jul 2008 14:38:35 +0200
Subject: mmc_test: print message when attaching to card

Make it a bit more obvious that the card has been claimed by the
mmc_test driver so that people don't have to wonder why their block
device never shows up.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/card/mmc_test.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 25296011df5..a067fe43630 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -1256,6 +1256,8 @@ static int mmc_test_probe(struct mmc_card *card)
 	if (ret)
 		return ret;
 
+	dev_info(&card->dev, "Card claimed for testing.\n");
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 137d3edb48425f82a6a4226b664f90ed5e42eea5 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Sat, 19 Jul 2008 23:03:35 +0900
Subject: sg: reimplement sg mapping iterator

This is alternative implementation of sg content iterator introduced
by commit 83e7d317... from Pierre Ossman in next-20080716.  As there's
already an sg iterator which iterates over sg entries themselves, name
this sg_mapping_iterator.

Slightly edited description from the original implementation follows.

Iteration over a sg list is not that trivial when you take into
account that memory pages might have to be mapped before being used.
Unfortunately, that means that some parts of the kernel restrict
themselves to directly accesible memory just to not have to deal with
the mess.

This patch adds a simple iterator system that allows any code to
easily traverse an sg list and not have to deal with all the details.
The user can decide to consume part of the iteration.  Also, iteration
can be stopped and resumed later if releasing the kmap between
iteration steps is necessary.  These features are useful to implement
piecemeal sg copying for interrupt drive PIO for example.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 include/linux/scatterlist.h |  38 ++++++++++
 lib/scatterlist.c           | 176 ++++++++++++++++++++++++++++++++------------
 2 files changed, 168 insertions(+), 46 deletions(-)

diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index 71fc8136004..e5996984ddd 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -224,4 +224,42 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
  */
 #define SG_MAX_SINGLE_ALLOC		(PAGE_SIZE / sizeof(struct scatterlist))
 
+
+/*
+ * Mapping sg iterator
+ *
+ * Iterates over sg entries mapping page-by-page.  On each successful
+ * iteration, @miter->page points to the mapped page and
+ * @miter->length bytes of data can be accessed at @miter->addr.  As
+ * long as an interation is enclosed between start and stop, the user
+ * is free to choose control structure and when to stop.
+ *
+ * @miter->consumed is set to @miter->length on each iteration.  It
+ * can be adjusted if the user can't consume all the bytes in one go.
+ * Also, a stopped iteration can be resumed by calling next on it.
+ * This is useful when iteration needs to release all resources and
+ * continue later (e.g. at the next interrupt).
+ */
+
+#define SG_MITER_ATOMIC		(1 << 0)	 /* use kmap_atomic */
+
+struct sg_mapping_iter {
+	/* the following three fields can be accessed directly */
+	struct page		*page;		/* currently mapped page */
+	void			*addr;		/* pointer to the mapped area */
+	size_t			length;		/* length of the mapped area */
+	size_t			consumed;	/* number of consumed bytes */
+
+	/* these are internal states, keep away */
+	struct scatterlist	*__sg;		/* current entry */
+	unsigned int		__nents;	/* nr of remaining entries */
+	unsigned int		__offset;	/* offset within sg */
+	unsigned int		__flags;
+};
+
+void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
+		    unsigned int nents, unsigned int flags);
+bool sg_miter_next(struct sg_mapping_iter *miter);
+void sg_miter_stop(struct sg_mapping_iter *miter);
+
 #endif /* _LINUX_SCATTERLIST_H */
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index b80c21100d7..876ba6d5b67 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -294,6 +294,117 @@ int sg_alloc_table(struct sg_table *table, unsigned int nents, gfp_t gfp_mask)
 }
 EXPORT_SYMBOL(sg_alloc_table);
 
+/**
+ * sg_miter_start - start mapping iteration over a sg list
+ * @miter: sg mapping iter to be started
+ * @sgl: sg list to iterate over
+ * @nents: number of sg entries
+ *
+ * Description:
+ *   Starts mapping iterator @miter.
+ *
+ * Context:
+ *   Don't care.
+ */
+void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
+		    unsigned int nents, unsigned int flags)
+{
+	memset(miter, 0, sizeof(struct sg_mapping_iter));
+
+	miter->__sg = sgl;
+	miter->__nents = nents;
+	miter->__offset = 0;
+	miter->__flags = flags;
+}
+EXPORT_SYMBOL(sg_miter_start);
+
+/**
+ * sg_miter_next - proceed mapping iterator to the next mapping
+ * @miter: sg mapping iter to proceed
+ *
+ * Description:
+ *   Proceeds @miter@ to the next mapping.  @miter@ should have been
+ *   started using sg_miter_start().  On successful return,
+ *   @miter@->page, @miter@->addr and @miter@->length point to the
+ *   current mapping.
+ *
+ * Context:
+ *   IRQ disabled if SG_MITER_ATOMIC.  IRQ must stay disabled till
+ *   @miter@ is stopped.  May sleep if !SG_MITER_ATOMIC.
+ *
+ * Returns:
+ *   true if @miter contains the next mapping.  false if end of sg
+ *   list is reached.
+ */
+bool sg_miter_next(struct sg_mapping_iter *miter)
+{
+	unsigned int off, len;
+
+	/* check for end and drop resources from the last iteration */
+	if (!miter->__nents)
+		return false;
+
+	sg_miter_stop(miter);
+
+	/* get to the next sg if necessary.  __offset is adjusted by stop */
+	if (miter->__offset == miter->__sg->length && --miter->__nents) {
+		miter->__sg = sg_next(miter->__sg);
+		miter->__offset = 0;
+	}
+
+	/* map the next page */
+	off = miter->__sg->offset + miter->__offset;
+	len = miter->__sg->length - miter->__offset;
+
+	miter->page = nth_page(sg_page(miter->__sg), off >> PAGE_SHIFT);
+	off &= ~PAGE_MASK;
+	miter->length = min_t(unsigned int, len, PAGE_SIZE - off);
+	miter->consumed = miter->length;
+
+	if (miter->__flags & SG_MITER_ATOMIC)
+		miter->addr = kmap_atomic(miter->page, KM_BIO_SRC_IRQ) + off;
+	else
+		miter->addr = kmap(miter->page) + off;
+
+	return true;
+}
+EXPORT_SYMBOL(sg_miter_next);
+
+/**
+ * sg_miter_stop - stop mapping iteration
+ * @miter: sg mapping iter to be stopped
+ *
+ * Description:
+ *   Stops mapping iterator @miter.  @miter should have been started
+ *   started using sg_miter_start().  A stopped iteration can be
+ *   resumed by calling sg_miter_next() on it.  This is useful when
+ *   resources (kmap) need to be released during iteration.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+void sg_miter_stop(struct sg_mapping_iter *miter)
+{
+	WARN_ON(miter->consumed > miter->length);
+
+	/* drop resources from the last iteration */
+	if (miter->addr) {
+		miter->__offset += miter->consumed;
+
+		if (miter->__flags & SG_MITER_ATOMIC) {
+			WARN_ON(!irqs_disabled());
+			kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ);
+		} else
+			kunmap(miter->addr);
+
+		miter->page = NULL;
+		miter->addr = NULL;
+		miter->length = 0;
+		miter->consumed = 0;
+	}
+}
+EXPORT_SYMBOL(sg_miter_stop);
+
 /**
  * sg_copy_buffer - Copy data between a linear buffer and an SG list
  * @sgl:		 The SG list
@@ -309,56 +420,29 @@ EXPORT_SYMBOL(sg_alloc_table);
 static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 			     void *buf, size_t buflen, int to_buffer)
 {
-	struct scatterlist *sg;
-	size_t buf_off = 0;
-	int i;
-
-	WARN_ON(!irqs_disabled());
-
-	for_each_sg(sgl, sg, nents, i) {
-		struct page *page;
-		int n = 0;
-		unsigned int sg_off = sg->offset;
-		unsigned int sg_copy = sg->length;
-
-		if (sg_copy > buflen)
-			sg_copy = buflen;
-		buflen -= sg_copy;
-
-		while (sg_copy > 0) {
-			unsigned int page_copy;
-			void *p;
-
-			page_copy = PAGE_SIZE - sg_off;
-			if (page_copy > sg_copy)
-				page_copy = sg_copy;
-
-			page = nth_page(sg_page(sg), n);
-			p = kmap_atomic(page, KM_BIO_SRC_IRQ);
-
-			if (to_buffer)
-				memcpy(buf + buf_off, p + sg_off, page_copy);
-			else {
-				memcpy(p + sg_off, buf + buf_off, page_copy);
-				flush_kernel_dcache_page(page);
-			}
-
-			kunmap_atomic(p, KM_BIO_SRC_IRQ);
-
-			buf_off += page_copy;
-			sg_off += page_copy;
-			if (sg_off == PAGE_SIZE) {
-				sg_off = 0;
-				n++;
-			}
-			sg_copy -= page_copy;
+	unsigned int offset = 0;
+	struct sg_mapping_iter miter;
+
+	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+
+	while (sg_miter_next(&miter) && offset < buflen) {
+		unsigned int len;
+
+		len = min(miter.length, buflen - offset);
+
+		if (to_buffer)
+			memcpy(buf + offset, miter.addr, len);
+		else {
+			memcpy(miter.addr, buf + offset, len);
+			flush_kernel_dcache_page(miter.page);
 		}
 
-		if (!buflen)
-			break;
+		offset += len;
 	}
 
-	return buf_off;
+	sg_miter_stop(&miter);
+
+	return offset;
 }
 
 /**
-- 
cgit v1.2.3


From 7659150c60839a2bd31f74e866374abb9be17e43 Mon Sep 17 00:00:00 2001
From: Pierre Ossman <drzeus@drzeus.cx>
Date: Mon, 21 Jul 2008 00:32:11 +0200
Subject: sdhci: highmem capable PIO routines

Improve the PIO handling so that it can service highmem pages.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/sdhci.c | 163 +++++++++++++++++++++--------------------------
 drivers/mmc/host/sdhci.h |   7 +-
 2 files changed, 75 insertions(+), 95 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 8b1f412144c..c3a5db72ddd 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -173,119 +173,95 @@ static void sdhci_led_control(struct led_classdev *led,
  *                                                                           *
 \*****************************************************************************/
 
-static inline char* sdhci_sg_to_buffer(struct sdhci_host* host)
-{
-	return sg_virt(host->cur_sg);
-}
-
-static inline int sdhci_next_sg(struct sdhci_host* host)
-{
-	/*
-	 * Skip to next SG entry.
-	 */
-	host->cur_sg++;
-	host->num_sg--;
-
-	/*
-	 * Any entries left?
-	 */
-	if (host->num_sg > 0) {
-		host->offset = 0;
-		host->remain = host->cur_sg->length;
-	}
-
-	return host->num_sg;
-}
-
 static void sdhci_read_block_pio(struct sdhci_host *host)
 {
-	int blksize, chunk_remain;
-	u32 data;
-	char *buffer;
-	int size;
+	unsigned long flags;
+	size_t blksize, len, chunk;
+	u32 scratch;
+	u8 *buf;
 
 	DBG("PIO reading\n");
 
 	blksize = host->data->blksz;
-	chunk_remain = 0;
-	data = 0;
+	chunk = 0;
 
-	buffer = sdhci_sg_to_buffer(host) + host->offset;
+	local_irq_save(flags);
 
 	while (blksize) {
-		if (chunk_remain == 0) {
-			data = readl(host->ioaddr + SDHCI_BUFFER);
-			chunk_remain = min(blksize, 4);
-		}
+		if (!sg_miter_next(&host->sg_miter))
+			BUG();
 
-		size = min(host->remain, chunk_remain);
+		len = min(host->sg_miter.length, blksize);
 
-		chunk_remain -= size;
-		blksize -= size;
-		host->offset += size;
-		host->remain -= size;
+		blksize -= len;
+		host->sg_miter.consumed = len;
 
-		while (size) {
-			*buffer = data & 0xFF;
-			buffer++;
-			data >>= 8;
-			size--;
-		}
+		buf = host->sg_miter.addr;
 
-		if (host->remain == 0) {
-			if (sdhci_next_sg(host) == 0) {
-				BUG_ON(blksize != 0);
-				return;
+		while (len) {
+			if (chunk == 0) {
+				scratch = readl(host->ioaddr + SDHCI_BUFFER);
+				chunk = 4;
 			}
-			buffer = sdhci_sg_to_buffer(host);
+
+			*buf = scratch & 0xFF;
+
+			buf++;
+			scratch >>= 8;
+			chunk--;
+			len--;
 		}
 	}
+
+	sg_miter_stop(&host->sg_miter);
+
+	local_irq_restore(flags);
 }
 
 static void sdhci_write_block_pio(struct sdhci_host *host)
 {
-	int blksize, chunk_remain;
-	u32 data;
-	char *buffer;
-	int bytes, size;
+	unsigned long flags;
+	size_t blksize, len, chunk;
+	u32 scratch;
+	u8 *buf;
 
 	DBG("PIO writing\n");
 
 	blksize = host->data->blksz;
-	chunk_remain = 4;
-	data = 0;
+	chunk = 0;
+	scratch = 0;
 
-	bytes = 0;
-	buffer = sdhci_sg_to_buffer(host) + host->offset;
+	local_irq_save(flags);
 
 	while (blksize) {
-		size = min(host->remain, chunk_remain);
-
-		chunk_remain -= size;
-		blksize -= size;
-		host->offset += size;
-		host->remain -= size;
-
-		while (size) {
-			data >>= 8;
-			data |= (u32)*buffer << 24;
-			buffer++;
-			size--;
-		}
+		if (!sg_miter_next(&host->sg_miter))
+			BUG();
 
-		if (chunk_remain == 0) {
-			writel(data, host->ioaddr + SDHCI_BUFFER);
-			chunk_remain = min(blksize, 4);
-		}
+		len = min(host->sg_miter.length, blksize);
+
+		blksize -= len;
+		host->sg_miter.consumed = len;
+
+		buf = host->sg_miter.addr;
 
-		if (host->remain == 0) {
-			if (sdhci_next_sg(host) == 0) {
-				BUG_ON(blksize != 0);
-				return;
+		while (len) {
+			scratch |= (u32)*buf << (chunk * 8);
+
+			buf++;
+			chunk++;
+			len--;
+
+			if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
+				writel(scratch, host->ioaddr + SDHCI_BUFFER);
+				chunk = 0;
+				scratch = 0;
 			}
-			buffer = sdhci_sg_to_buffer(host);
 		}
 	}
+
+	sg_miter_stop(&host->sg_miter);
+
+	local_irq_restore(flags);
 }
 
 static void sdhci_transfer_pio(struct sdhci_host *host)
@@ -294,7 +270,7 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
 
 	BUG_ON(!host->data);
 
-	if (host->num_sg == 0)
+	if (host->blocks == 0)
 		return;
 
 	if (host->data->flags & MMC_DATA_READ)
@@ -308,7 +284,8 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
 		else
 			sdhci_write_block_pio(host);
 
-		if (host->num_sg == 0)
+		host->blocks--;
+		if (host->blocks == 0)
 			break;
 	}
 
@@ -713,11 +690,9 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 	}
 
 	if (!(host->flags & SDHCI_REQ_USE_DMA)) {
-		host->cur_sg = data->sg;
-		host->num_sg = data->sg_len;
-
-		host->offset = 0;
-		host->remain = host->cur_sg->length;
+		sg_miter_start(&host->sg_miter,
+			data->sg, data->sg_len, SG_MITER_ATOMIC);
+		host->blocks = data->blocks;
 	}
 
 	/* We do not handle DMA boundaries, so set it to max (512 KiB) */
@@ -1583,9 +1558,15 @@ int sdhci_add_host(struct sdhci_host *host)
 		}
 	}
 
-	/* XXX: Hack to get MMC layer to avoid highmem */
-	if (!(host->flags & SDHCI_USE_DMA))
-		mmc_dev(host->mmc)->dma_mask = NULL;
+	/*
+	 * If we use DMA, then it's up to the caller to set the DMA
+	 * mask, but PIO does not need the hw shim so we set a new
+	 * mask here in that case.
+	 */
+	if (!(host->flags & SDHCI_USE_DMA)) {
+		host->dma_mask = DMA_BIT_MASK(64);
+		mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
+	}
 
 	host->max_clk =
 		(caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 5bb35528176..a06bf8b8934 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -212,6 +212,7 @@ struct sdhci_host {
 
 	/* Internal data */
 	struct mmc_host		*mmc;		/* MMC structure */
+	u64			dma_mask;	/* custom DMA mask */
 
 #ifdef CONFIG_LEDS_CLASS
 	struct led_classdev	led;		/* LED control */
@@ -238,10 +239,8 @@ struct sdhci_host {
 	struct mmc_data		*data;		/* Current data request */
 	unsigned int		data_early:1;	/* Data finished before cmd */
 
-	struct scatterlist	*cur_sg;	/* We're working on this */
-	int			num_sg;		/* Entries left */
-	int			offset;		/* Offset into current sg */
-	int			remain;		/* Bytes left in current */
+	struct sg_mapping_iter	sg_miter;	/* SG state for PIO */
+	unsigned int		blocks;		/* remaining PIO blocks */
 
 	int			sg_count;	/* Mapped sg entries */
 
-- 
cgit v1.2.3


From 6f0168d2dacd7972d887e1ca27943ef8af7512a5 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 16 May 2008 11:00:23 +0200
Subject: HID: use get/put_unaligned_* helpers

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index f43d6d3cf2f..426ac5add58 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -780,7 +780,7 @@ static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
  */
 static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
 {
-	__le64 x;
+	u64 x;
 	u64 m = (1ULL << n) - 1;
 
 	if (n > 32)
@@ -796,10 +796,10 @@ static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u3
 	report += offset >> 3;
 	offset &= 7;
 
-	x = get_unaligned((__le64 *)report);
-	x &= cpu_to_le64(~(m << offset));
-	x |= cpu_to_le64(((u64) value) << offset);
-	put_unaligned(x, (__le64 *) report);
+	x = get_unaligned_le64(report);
+	x &= ~(m << offset);
+	x |= ((u64)value) << offset;
+	put_unaligned_le64(x, report);
 }
 
 /*
-- 
cgit v1.2.3


From 7961df16819085b8a357720d89d0239036e6af2a Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Mon, 26 May 2008 11:25:20 +0200
Subject: HID: Switch hiddev to unlocked_ioctl

Push down the BKL. In some cases compat_ioctl already doesn't take the
BKL so we don't either. Some of the locking here seems already dubious
and object lifetimes want documenting

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hiddev.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 95cc192bc7a..fe4f36472cb 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -406,6 +406,7 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd,
 	uref_multi = kmalloc(sizeof(struct hiddev_usage_ref_multi), GFP_KERNEL);
 	if (!uref_multi)
 		return -ENOMEM;
+	lock_kernel();
 	uref = &uref_multi->uref;
 	if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) {
 		if (copy_from_user(uref_multi, user_arg,
@@ -501,12 +502,15 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd,
 		}
 
 goodreturn:
+		unlock_kernel();
 		kfree(uref_multi);
 		return 0;
 fault:
+		unlock_kernel();
 		kfree(uref_multi);
 		return -EFAULT;
 inval:
+		unlock_kernel();
 		kfree(uref_multi);
 		return -EINVAL;
 	}
@@ -540,7 +544,7 @@ static noinline int hiddev_ioctl_string(struct hiddev *hiddev, unsigned int cmd,
 	return len;
 }
 
-static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct hiddev_list *list = file->private_data;
 	struct hiddev *hiddev = list->hiddev;
@@ -555,7 +559,10 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 	struct usbhid_device *usbhid = hid->driver_data;
 	void __user *user_arg = (void __user *)arg;
 	int i;
+	
+	/* Called without BKL by compat methods so no BKL taken */
 
+	/* FIXME: Who or what stop this racing with a disconnect ?? */
 	if (!hiddev->exist)
 		return -EIO;
 
@@ -768,7 +775,7 @@ static const struct file_operations hiddev_fops = {
 	.poll =		hiddev_poll,
 	.open =		hiddev_open,
 	.release =	hiddev_release,
-	.ioctl =	hiddev_ioctl,
+	.unlocked_ioctl =	hiddev_ioctl,
 	.fasync =	hiddev_fasync,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= hiddev_compat_ioctl,
-- 
cgit v1.2.3


From 979c407e3b89b606e810fa494ef316896eadbfad Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Mon, 26 May 2008 11:25:26 +0200
Subject: HID: Push down BKL into ioctl handler in hidraw

In this case I simply wrapped it as code review suggests the locking
already terminally broken and I didn't want to make it first. See added
comment

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hidraw.c | 46 ++++++++++++++++++++++++----------------------
 1 file changed, 24 insertions(+), 22 deletions(-)

diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 0c6b4d4e7e2..1018f380de3 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -105,6 +105,7 @@ out:
 static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
 {
 	unsigned int minor = iminor(file->f_path.dentry->d_inode);
+	/* FIXME: What stops hidraw_table going NULL */
 	struct hid_device *dev = hidraw_table[minor]->hid;
 	__u8 *buf;
 	int ret = 0;
@@ -214,35 +215,38 @@ static int hidraw_release(struct inode * inode, struct file * file)
 	return 0;
 }
 
-static int hidraw_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long hidraw_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
+	struct inode *inode = file->f_path.dentry->d_inode;
 	unsigned int minor = iminor(inode);
+	long ret = 0;
+	/* FIXME: What stops hidraw_table going NULL */
 	struct hidraw *dev = hidraw_table[minor];
 	void __user *user_arg = (void __user*) arg;
 
+	lock_kernel();
 	switch (cmd) {
 		case HIDIOCGRDESCSIZE:
 			if (put_user(dev->hid->rsize, (int __user *)arg))
-				return -EFAULT;
-			return 0;
+				ret = -EFAULT;
+			break;
 
 		case HIDIOCGRDESC:
 			{
 				__u32 len;
 
 				if (get_user(len, (int __user *)arg))
-					return -EFAULT;
-
-				if (len > HID_MAX_DESCRIPTOR_SIZE - 1)
-					return -EINVAL;
-
-				if (copy_to_user(user_arg + offsetof(
-								struct hidraw_report_descriptor,
-								value[0]),
-							dev->hid->rdesc,
-							min(dev->hid->rsize, len)))
-						return -EFAULT;
-				return 0;
+					ret = -EFAULT;
+				else if (len > HID_MAX_DESCRIPTOR_SIZE - 1)
+					ret = -EINVAL;
+				else if (copy_to_user(user_arg + offsetof(
+					struct hidraw_report_descriptor,
+					value[0]),
+					dev->hid->rdesc,
+					min(dev->hid->rsize, len)))
+					ret = -EFAULT;
+				break;
 			}
 		case HIDIOCGRAWINFO:
 			{
@@ -252,15 +256,13 @@ static int hidraw_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 				dinfo.vendor = dev->hid->vendor;
 				dinfo.product = dev->hid->product;
 				if (copy_to_user(user_arg, &dinfo, sizeof(dinfo)))
-					return -EFAULT;
-
-				return 0;
+					ret = -EFAULT;
+				break;
 			}
 		default:
-			printk(KERN_EMERG "hidraw: unsupported ioctl() %x\n",
-					cmd);
+			ret = -ENOTTY;
 	}
-	return -EINVAL;
+	return ret;
 }
 
 static const struct file_operations hidraw_ops = {
@@ -270,7 +272,7 @@ static const struct file_operations hidraw_ops = {
 	.poll =         hidraw_poll,
 	.open =         hidraw_open,
 	.release =      hidraw_release,
-	.ioctl =        hidraw_ioctl,
+	.unlocked_ioctl = hidraw_ioctl,
 };
 
 void hidraw_report_event(struct hid_device *hid, u8 *data, int len)
-- 
cgit v1.2.3


From 88af45bafdda8f892c9d45ce38d55fdf7e734513 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Tue, 27 May 2008 11:36:40 +0200
Subject: HID: fix compile issue in hiddev ioctl

Fix build failure introduced by Alan's ioctl -> unlocked_ioctl
(pushing BKL down to the driver) conversion patch for hiddev.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hiddev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index fe4f36472cb..9c8d1563447 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -764,7 +764,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 static long hiddev_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct inode *inode = file->f_path.dentry->d_inode;
-	return hiddev_ioctl(inode, file, cmd, (unsigned long)compat_ptr(arg));
+	return hiddev_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
 }
 #endif
 
-- 
cgit v1.2.3


From 00b33277fa544676250d898fccea0a0255608e7f Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Wed, 4 Jun 2008 15:29:42 +0200
Subject: HID: remove unused variable from hiddev compat ioctl

Remove unused inode variable from hiddev compat ioctl handler.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hiddev.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 9c8d1563447..842e9edb888 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -763,7 +763,6 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 #ifdef CONFIG_COMPAT
 static long hiddev_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
 	return hiddev_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
 }
 #endif
-- 
cgit v1.2.3


From 37cdffdadf7ad1b28fa4bd14bb904f4f612e5ae3 Mon Sep 17 00:00:00 2001
From: Alexandre Karpenko <alexander@comm.utoronto.ca>
Date: Wed, 4 Jun 2008 10:31:24 +0200
Subject: HID: add fn key support on Macbook Pro 4,1 and Macbook Air

Added device ids to hid-quriks for detection of keyboards on 4th
generation Macbook Pro and Macbook Air

The naming scheme is consistent with past Apple keyboards in hid-quirks;
as defined by Apple (including device ids) in:
/System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCKeyboard.kext/Co
ntents/Info.plist
Patch was originally posted and tested at:
https://bugs.launchpad.net/mactel-support/+bug/207127

Signed-off-by: Alexandre Karpenko <alexander@comm.utoronto.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-quirks.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index b98ec426b4d..ba22eec200c 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -69,12 +69,18 @@
 #define USB_DEVICE_ID_APPLE_ALU_ANSI	0x0220
 #define USB_DEVICE_ID_APPLE_ALU_ISO	0x0221
 #define USB_DEVICE_ID_APPLE_ALU_JIS	0x0222
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI	0x0223
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO	0x0224
+#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS	0x0225
 #define USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI    0x0229
 #define USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO     0x022a
 #define USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS     0x022b
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI  0x022c
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO   0x022d
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS   0x022e
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI	0x0230
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO	0x0231
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS	0x0232
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
 #define USB_DEVICE_ID_APPLE_IRCONTROL4	0x8242
@@ -642,6 +648,12 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 
-- 
cgit v1.2.3


From a44ebccea873cf7d58b63605f1cdd6da9dfec70f Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Sun, 8 Jun 2008 16:15:16 +0800
Subject: HID:usbkbd:mark usb_kbd_keycode array as const

mark it as const because it is read only

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/usbkbd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index 3cd46d2e53c..6aa8b7e8fb9 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -43,7 +43,7 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE(DRIVER_LICENSE);
 
-static unsigned char usb_kbd_keycode[256] = {
+static const unsigned char usb_kbd_keycode[256] = {
 	  0,  0,  0,  0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,
 	 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44,  2,  3,
 	  4,  5,  6,  7,  8,  9, 10, 11, 28,  1, 14, 15, 57, 12, 13, 26,
-- 
cgit v1.2.3


From 740f370dc61dc478d891d7d47660bb3ae39ddb4f Mon Sep 17 00:00:00 2001
From: Dan Nicholson <dbn.lists@gmail.com>
Date: Sat, 14 Jun 2008 10:26:24 -0700
Subject: HID: Invert HWHEEL mappings for some Logitech mice

Some Logitech mice have a tilt wheel which register as HWHEEL buttons.
The events are positive for a click to the right and negative for a
click to the left. Applications expect the opposite, though.

I suspect this affects a lot more Logitech mice, but these are the only
two I have. I tested this using evtest and a GTK application. A similar
Microsoft Intellimouse I have works correctly.

Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-quirks.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index ba22eec200c..f35c2d1d53a 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -247,6 +247,8 @@
 #define USB_DEVICE_ID_LD_MACHINETEST	0x2040
 
 #define USB_VENDOR_ID_LOGITECH		0x046d
+#define USB_DEVICE_ID_LOGITECH_LX3	0xc044
+#define USB_DEVICE_ID_LOGITECH_V150	0xc047
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
 #define USB_DEVICE_ID_LOGITECH_HARMONY  0xc110
 #define USB_DEVICE_ID_LOGITECH_HARMONY_2 0xc111
@@ -599,6 +601,8 @@ static const struct hid_blacklist {
 
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_ELITE_KBD, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_LX3, HID_QUIRK_INVERT_HWHEEL },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_V150, HID_QUIRK_INVERT_HWHEEL },
 
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K, HID_QUIRK_MICROSOFT_KEYS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K, HID_QUIRK_MICROSOFT_KEYS },
-- 
cgit v1.2.3


From f472f80034ae5d0be7d7196c7e65d0ca8890afb4 Mon Sep 17 00:00:00 2001
From: Rafi Rubin <rafi@seas.upenn.edu>
Date: Thu, 19 Jun 2008 11:51:04 +0200
Subject: HID: add n-trig digitizer usage

This adds a hid usage that is reported by the N-Trig digitizer in the Dell
Latitude XT screen.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 include/linux/hid.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/hid.h b/include/linux/hid.h
index fe56b86f2c6..ac4e678a04e 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -512,7 +512,7 @@ struct hid_descriptor {
 
 /* Applications from HID Usage Tables 4/8/99 Version 1.1 */
 /* We ignore a few input applications that are not widely used */
-#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001))
+#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002))
 
 /* HID core API */
 
-- 
cgit v1.2.3


From 4db1c62c9991e62b441672db7f227e722776adc4 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Tue, 24 Jun 2008 14:45:27 +0200
Subject: HID: fix memory leak in hidraw_release

hidraw_release() forgot to free the linked list structure, causing memory
leak.

Reported-by: Juan Marcos Diez Esteban <juan_m_diez@yahoo.es>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hidraw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 0c6b4d4e7e2..8ecd7752510 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -211,6 +211,8 @@ static int hidraw_release(struct inode * inode, struct file * file)
 			kfree(list->hidraw);
 	}
 
+	kfree(list);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From dc25b78f21384f534a8a5da9600972aa9a51a680 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 27 Jun 2008 22:09:25 +0200
Subject: HID: fix quirk handling in usbmouse/kbd

When usbmouse/kbd is set to build, USB_HID is never defined due to
the USB_HID!=y Kconfig rule. Test CONFIG_USB_HID_MODULE in both
drivers instead.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/usbkbd.c   | 2 +-
 drivers/hid/usbhid/usbmouse.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index 6aa8b7e8fb9..d7212ac8923 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -233,7 +233,7 @@ static int usb_kbd_probe(struct usb_interface *iface,
 	if (!usb_endpoint_is_int_in(endpoint))
 		return -ENODEV;
 
-#ifdef CONFIG_USB_HID
+#ifdef CONFIG_USB_HID_MODULE
 	if (usbhid_lookup_quirk(le16_to_cpu(dev->descriptor.idVendor),
 				le16_to_cpu(dev->descriptor.idProduct))
 			& HID_QUIRK_IGNORE) {
diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c
index 703e9d0e871..f74740f9280 100644
--- a/drivers/hid/usbhid/usbmouse.c
+++ b/drivers/hid/usbhid/usbmouse.c
@@ -129,7 +129,7 @@ static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_i
 	if (!usb_endpoint_is_int_in(endpoint))
 		return -ENODEV;
 
-#ifdef CONFIG_USB_HID
+#ifdef CONFIG_USB_HID_MODULE
 	if (usbhid_lookup_quirk(le16_to_cpu(dev->descriptor.idVendor),
 				le16_to_cpu(dev->descriptor.idProduct))
 			& (HID_QUIRK_IGNORE|HID_QUIRK_IGNORE_MOUSE)) {
-- 
cgit v1.2.3


From 2c3e3bfbb667f486579d6742b481058e4316dafd Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Tue, 1 Jul 2008 12:35:16 +0200
Subject: HID: add quirk for Logitech DiNovo desktop

Logitech DiNovo desktop needs the same quirk as other DiNovo
devices.

Reported-by: Farid Benamrouche <farid.benamrouche@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-quirks.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index f35c2d1d53a..61e78a4369b 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -322,6 +322,7 @@
 #define USB_DEVICE_ID_S510_RECEIVER_2	0xc517
 #define USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500	0xc512
 #define USB_DEVICE_ID_MX3000_RECEIVER	0xc513
+#define USB_DEVICE_ID_DINOVO_DESKTOP	0xc704
 #define USB_DEVICE_ID_DINOVO_EDGE	0xc714
 #define USB_DEVICE_ID_DINOVO_MINI	0xc71f
 
@@ -451,7 +452,8 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_NEC, USB_DEVICE_ID_NEC_USB_GAME_PAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
-	
+
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_DESKTOP, HID_QUIRK_DUPLICATE_USAGES },
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE, HID_QUIRK_DUPLICATE_USAGES },
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_MINI, HID_QUIRK_DUPLICATE_USAGES },
 
-- 
cgit v1.2.3


From 32146dc90860b3847b945fdb220a7d86c1ead92a Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Fri, 4 Jul 2008 15:22:53 +0200
Subject: HID: gyration sleep button quirk

This patch is based on one provided by Jiri Kosina to handle the sleep
button. I just added some cleanup and integrated it into my series.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input-quirks.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/hid/hid-input-quirks.c b/drivers/hid/hid-input-quirks.c
index 4c2052c658f..9b58cdc24cc 100644
--- a/drivers/hid/hid-input-quirks.c
+++ b/drivers/hid/hid-input-quirks.c
@@ -438,6 +438,18 @@ int hidinput_event_quirks(struct hid_device *hid, struct hid_field *field, struc
 		input_event(input, usage->type, REL_WHEEL, -value);
 		return 1;
 	}
+
+	/* Gyration MCE remote "Sleep" key */
+	if (hid->vendor == VENDOR_ID_GYRATION &&
+	    hid->product == DEVICE_ID_GYRATION_REMOTE &&
+	    (usage->hid & HID_USAGE_PAGE) == HID_UP_GENDESK &&
+	    (usage->hid & 0xff) == 0x82) {
+		input_event(input, usage->type, usage->code, 1);
+		input_sync(input);
+		input_event(input, usage->type, usage->code, 0);
+		input_sync(input);
+		return 1;
+	}
 	return 0;
 }
 
-- 
cgit v1.2.3


From a7f32697ed571d8a222ff9e77b9f4476e877ed1a Mon Sep 17 00:00:00 2001
From: Daniel Walker <dwalker@mvista.com>
Date: Fri, 4 Jul 2008 15:23:10 +0200
Subject: HID: gyration remote support

This adds in a quirk for the additional un-mapped buttons on the
gyration MCE remote.

Defines are now alphabetical.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input-quirks.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/hid/hid-input-quirks.c b/drivers/hid/hid-input-quirks.c
index 9b58cdc24cc..16feea01449 100644
--- a/drivers/hid/hid-input-quirks.c
+++ b/drivers/hid/hid-input-quirks.c
@@ -89,6 +89,29 @@ static int quirk_logitech_ultrax_remote(struct hid_usage *usage, struct input_de
 	return 1;
 }
 
+static int quirk_gyration_remote(struct hid_usage *usage, struct input_dev *input,
+			      unsigned long **bit, int *max)
+{
+	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_LOGIVENDOR)
+		return 0;
+
+	set_bit(EV_REP, input->evbit);
+	switch(usage->hid & HID_USAGE) {
+		/* Reported on Gyration MCE Remote */
+		case 0x00d: map_key_clear(KEY_HOME);		break;
+		case 0x024: map_key_clear(KEY_DVD);		break;
+		case 0x025: map_key_clear(KEY_PVR);		break;
+		case 0x046: map_key_clear(KEY_MEDIA);		break;
+		case 0x047: map_key_clear(KEY_MP3);		break;
+		case 0x049: map_key_clear(KEY_CAMERA);		break;
+		case 0x04a: map_key_clear(KEY_VIDEO);		break;
+
+		default:
+			return 0;
+	}
+	return 1;
+}
+
 static int quirk_chicony_tactical_pad(struct hid_usage *usage, struct input_dev *input,
 			      unsigned long **bit, int *max)
 {
@@ -303,6 +326,9 @@ static int quirk_sunplus_wdesktop(struct hid_usage *usage, struct input_dev *inp
 #define VENDOR_ID_EZKEY				0x0518
 #define DEVICE_ID_BTC_8193			0x0002
 
+#define VENDOR_ID_GYRATION			0x0c16
+#define DEVICE_ID_GYRATION_REMOTE		0x0002
+
 #define VENDOR_ID_LOGITECH			0x046d
 #define DEVICE_ID_LOGITECH_RECEIVER		0xc101
 #define DEVICE_ID_S510_RECEIVER			0xc50c
@@ -337,6 +363,8 @@ static const struct hid_input_blacklist {
 
 	{ VENDOR_ID_EZKEY, DEVICE_ID_BTC_8193, quirk_btc_8193 },
 
+	{ VENDOR_ID_GYRATION, DEVICE_ID_GYRATION_REMOTE, quirk_gyration_remote },
+
 	{ VENDOR_ID_LOGITECH, DEVICE_ID_LOGITECH_RECEIVER, quirk_logitech_ultrax_remote },
 	{ VENDOR_ID_LOGITECH, DEVICE_ID_S510_RECEIVER, quirk_logitech_wireless },
 	{ VENDOR_ID_LOGITECH, DEVICE_ID_S510_RECEIVER_2, quirk_logitech_wireless },
-- 
cgit v1.2.3


From 094403ce3ec30e9819b1526134a948a1c92d1421 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 4 Jul 2008 12:48:20 -0400
Subject: HID: Add mapping of new KEY_MEDIA_REPEAT keycode

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 5c52a20ad34..0ef778aee99 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -612,6 +612,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 				case 0x0b6: map_key_clear(KEY_PREVIOUSSONG);	break;
 				case 0x0b7: map_key_clear(KEY_STOPCD);		break;
 				case 0x0b8: map_key_clear(KEY_EJECTCD);		break;
+				case 0x0bc: map_key_clear(KEY_MEDIA_REPEAT);	break;
 
 				case 0x0cd: map_key_clear(KEY_PLAYPAUSE);	break;
 			        case 0x0e0: map_abs_clear(ABS_VOLUME);		break;
-- 
cgit v1.2.3


From acc0b7c40983c316bc69d97b1acf05a228b0d61e Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Mon, 21 Jul 2008 18:30:05 +0200
Subject: HID: remove quirk lookup from usbkbd/usbmouse

This patch completely removes the dependency of usbkbd and usbmouse drivers
on usbhid code.

usbkbd/usbmouse drivers are not needed in the vast majority of cases anyway,
and they shouldn't be loaded in standard configurations at all. They are supposed
to be as trivial as possible, and searching for HID_QUIRK_IGNORE can even be
bad in some cases.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/usbkbd.c   | 8 --------
 drivers/hid/usbhid/usbmouse.c | 8 --------
 2 files changed, 16 deletions(-)

diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index d7212ac8923..0caaafe0184 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -233,14 +233,6 @@ static int usb_kbd_probe(struct usb_interface *iface,
 	if (!usb_endpoint_is_int_in(endpoint))
 		return -ENODEV;
 
-#ifdef CONFIG_USB_HID_MODULE
-	if (usbhid_lookup_quirk(le16_to_cpu(dev->descriptor.idVendor),
-				le16_to_cpu(dev->descriptor.idProduct))
-			& HID_QUIRK_IGNORE) {
-		return -ENODEV;
-	}
-#endif
-
 	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
 	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
 
diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c
index f74740f9280..35689ef172c 100644
--- a/drivers/hid/usbhid/usbmouse.c
+++ b/drivers/hid/usbhid/usbmouse.c
@@ -129,14 +129,6 @@ static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_i
 	if (!usb_endpoint_is_int_in(endpoint))
 		return -ENODEV;
 
-#ifdef CONFIG_USB_HID_MODULE
-	if (usbhid_lookup_quirk(le16_to_cpu(dev->descriptor.idVendor),
-				le16_to_cpu(dev->descriptor.idProduct))
-			& (HID_QUIRK_IGNORE|HID_QUIRK_IGNORE_MOUSE)) {
-		return -ENODEV;
-	}
-#endif
-
 	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
 	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
 
-- 
cgit v1.2.3


From 6a250778c79d6d14db9ed8e1f86f7b934e2bf3dc Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 22 Jul 2008 15:54:05 +0200
Subject: HID: apple_fn_keys F5 and F6

In drivers/hid/hid-input.c, the apple_fn_keys translation table
contains no entries for the F5 and F6 keys. This patch maps the F5 and
F6 keys to KBDILLUMDOWN and KBDILLUMUP, respektively, which make them
work as keyboard backlight control keys.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 0ef778aee99..1b2e8dc3398 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -100,6 +100,8 @@ static struct hidinput_key_translation apple_fn_keys[] = {
 	{ KEY_F2,       KEY_BRIGHTNESSUP,   APPLE_FLAG_FKEY },
 	{ KEY_F3,       KEY_FN_F5,          APPLE_FLAG_FKEY }, /* Exposé */
 	{ KEY_F4,       KEY_FN_F4,          APPLE_FLAG_FKEY }, /* Dashboard */
+	{ KEY_F5,       KEY_KBDILLUMDOWN,   APPLE_FLAG_FKEY },
+	{ KEY_F6,       KEY_KBDILLUMUP,     APPLE_FLAG_FKEY },
 	{ KEY_F7,       KEY_PREVIOUSSONG,   APPLE_FLAG_FKEY },
 	{ KEY_F8,       KEY_PLAYPAUSE,      APPLE_FLAG_FKEY },
 	{ KEY_F9,       KEY_NEXTSONG,       APPLE_FLAG_FKEY },
-- 
cgit v1.2.3


From 95d04f0735b4fc837bff9aedcc3f3efb20ddc3d1 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Wed, 23 Jul 2008 08:12:26 -0700
Subject: IB/mlx4: Add support for memory management extensions and local DMA
 L_Key

Add support for the following operations to mlx4 when device firmware
supports them:

 - Send with invalidate and local invalidate send queue work requests;
 - Allocate/free fast register MRs;
 - Allocate/free fast register MR page lists;
 - Fast register MR send queue work requests;
 - Local DMA L_Key.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/mlx4/cq.c      | 12 ++++++
 drivers/infiniband/hw/mlx4/main.c    | 11 ++++++
 drivers/infiniband/hw/mlx4/mlx4_ib.h | 15 ++++++++
 drivers/infiniband/hw/mlx4/mr.c      | 70 +++++++++++++++++++++++++++++++++++
 drivers/infiniband/hw/mlx4/qp.c      | 72 +++++++++++++++++++++++++++++++++---
 drivers/net/mlx4/fw.c                | 10 ++---
 drivers/net/mlx4/fw.h                |  2 +-
 drivers/net/mlx4/main.c              |  2 +
 drivers/net/mlx4/mr.c                | 23 +++++++++---
 include/linux/mlx4/device.h          | 10 +++++
 include/linux/mlx4/qp.h              | 16 ++++++--
 11 files changed, 221 insertions(+), 22 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index 299f20832ab..0b191a4842c 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -637,6 +637,7 @@ repoll:
 		case MLX4_OPCODE_SEND_IMM:
 			wc->wc_flags |= IB_WC_WITH_IMM;
 		case MLX4_OPCODE_SEND:
+		case MLX4_OPCODE_SEND_INVAL:
 			wc->opcode    = IB_WC_SEND;
 			break;
 		case MLX4_OPCODE_RDMA_READ:
@@ -657,6 +658,12 @@ repoll:
 		case MLX4_OPCODE_LSO:
 			wc->opcode    = IB_WC_LSO;
 			break;
+		case MLX4_OPCODE_FMR:
+			wc->opcode    = IB_WC_FAST_REG_MR;
+			break;
+		case MLX4_OPCODE_LOCAL_INVAL:
+			wc->opcode    = IB_WC_LOCAL_INV;
+			break;
 		}
 	} else {
 		wc->byte_len = be32_to_cpu(cqe->byte_cnt);
@@ -667,6 +674,11 @@ repoll:
 			wc->wc_flags	= IB_WC_WITH_IMM;
 			wc->ex.imm_data = cqe->immed_rss_invalid;
 			break;
+		case MLX4_RECV_OPCODE_SEND_INVAL:
+			wc->opcode	= IB_WC_RECV;
+			wc->wc_flags	= IB_WC_WITH_INVALIDATE;
+			wc->ex.invalidate_rkey = be32_to_cpu(cqe->immed_rss_invalid);
+			break;
 		case MLX4_RECV_OPCODE_SEND:
 			wc->opcode   = IB_WC_RECV;
 			wc->wc_flags = 0;
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index bcf50648fa1..38d6907ab52 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -104,6 +104,12 @@ static int mlx4_ib_query_device(struct ib_device *ibdev,
 		props->device_cap_flags |= IB_DEVICE_UD_IP_CSUM;
 	if (dev->dev->caps.max_gso_sz)
 		props->device_cap_flags |= IB_DEVICE_UD_TSO;
+	if (dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_RESERVED_LKEY)
+		props->device_cap_flags |= IB_DEVICE_LOCAL_DMA_LKEY;
+	if ((dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_LOCAL_INV) &&
+	    (dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_REMOTE_INV) &&
+	    (dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_FAST_REG_WR))
+		props->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
 
 	props->vendor_id	   = be32_to_cpup((__be32 *) (out_mad->data + 36)) &
 		0xffffff;
@@ -127,6 +133,7 @@ static int mlx4_ib_query_device(struct ib_device *ibdev,
 	props->max_srq		   = dev->dev->caps.num_srqs - dev->dev->caps.reserved_srqs;
 	props->max_srq_wr	   = dev->dev->caps.max_srq_wqes - 1;
 	props->max_srq_sge	   = dev->dev->caps.max_srq_sge;
+	props->max_fast_reg_page_list_len = PAGE_SIZE / sizeof (u64);
 	props->local_ca_ack_delay  = dev->dev->caps.local_ca_ack_delay;
 	props->atomic_cap	   = dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_ATOMIC ?
 		IB_ATOMIC_HCA : IB_ATOMIC_NONE;
@@ -565,6 +572,7 @@ static void *mlx4_ib_add(struct mlx4_dev *dev)
 	strlcpy(ibdev->ib_dev.name, "mlx4_%d", IB_DEVICE_NAME_MAX);
 	ibdev->ib_dev.owner		= THIS_MODULE;
 	ibdev->ib_dev.node_type		= RDMA_NODE_IB_CA;
+	ibdev->ib_dev.local_dma_lkey	= dev->caps.reserved_lkey;
 	ibdev->ib_dev.phys_port_cnt	= dev->caps.num_ports;
 	ibdev->ib_dev.num_comp_vectors	= 1;
 	ibdev->ib_dev.dma_device	= &dev->pdev->dev;
@@ -627,6 +635,9 @@ static void *mlx4_ib_add(struct mlx4_dev *dev)
 	ibdev->ib_dev.get_dma_mr	= mlx4_ib_get_dma_mr;
 	ibdev->ib_dev.reg_user_mr	= mlx4_ib_reg_user_mr;
 	ibdev->ib_dev.dereg_mr		= mlx4_ib_dereg_mr;
+	ibdev->ib_dev.alloc_fast_reg_mr = mlx4_ib_alloc_fast_reg_mr;
+	ibdev->ib_dev.alloc_fast_reg_page_list = mlx4_ib_alloc_fast_reg_page_list;
+	ibdev->ib_dev.free_fast_reg_page_list  = mlx4_ib_free_fast_reg_page_list;
 	ibdev->ib_dev.attach_mcast	= mlx4_ib_mcg_attach;
 	ibdev->ib_dev.detach_mcast	= mlx4_ib_mcg_detach;
 	ibdev->ib_dev.process_mad	= mlx4_ib_process_mad;
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index c4cf5b69eef..d26a91317d4 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -83,6 +83,11 @@ struct mlx4_ib_mr {
 	struct ib_umem	       *umem;
 };
 
+struct mlx4_ib_fast_reg_page_list {
+	struct ib_fast_reg_page_list	ibfrpl;
+	dma_addr_t			map;
+};
+
 struct mlx4_ib_fmr {
 	struct ib_fmr           ibfmr;
 	struct mlx4_fmr         mfmr;
@@ -199,6 +204,11 @@ static inline struct mlx4_ib_mr *to_mmr(struct ib_mr *ibmr)
 	return container_of(ibmr, struct mlx4_ib_mr, ibmr);
 }
 
+static inline struct mlx4_ib_fast_reg_page_list *to_mfrpl(struct ib_fast_reg_page_list *ibfrpl)
+{
+	return container_of(ibfrpl, struct mlx4_ib_fast_reg_page_list, ibfrpl);
+}
+
 static inline struct mlx4_ib_fmr *to_mfmr(struct ib_fmr *ibfmr)
 {
 	return container_of(ibfmr, struct mlx4_ib_fmr, ibfmr);
@@ -239,6 +249,11 @@ struct ib_mr *mlx4_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
 				  u64 virt_addr, int access_flags,
 				  struct ib_udata *udata);
 int mlx4_ib_dereg_mr(struct ib_mr *mr);
+struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd,
+					int max_page_list_len);
+struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device *ibdev,
+							       int page_list_len);
+void mlx4_ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list);
 
 int mlx4_ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period);
 int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata);
diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index 68e92485fc7..db2086faa4e 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -183,6 +183,76 @@ int mlx4_ib_dereg_mr(struct ib_mr *ibmr)
 	return 0;
 }
 
+struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd,
+					int max_page_list_len)
+{
+	struct mlx4_ib_dev *dev = to_mdev(pd->device);
+	struct mlx4_ib_mr *mr;
+	int err;
+
+	mr = kmalloc(sizeof *mr, GFP_KERNEL);
+	if (!mr)
+		return ERR_PTR(-ENOMEM);
+
+	err = mlx4_mr_alloc(dev->dev, to_mpd(pd)->pdn, 0, 0, 0,
+			    max_page_list_len, 0, &mr->mmr);
+	if (err)
+		goto err_free;
+
+	err = mlx4_mr_enable(dev->dev, &mr->mmr);
+	if (err)
+		goto err_mr;
+
+	return &mr->ibmr;
+
+err_mr:
+	mlx4_mr_free(dev->dev, &mr->mmr);
+
+err_free:
+	kfree(mr);
+	return ERR_PTR(err);
+}
+
+struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device *ibdev,
+							       int page_list_len)
+{
+	struct mlx4_ib_dev *dev = to_mdev(ibdev);
+	struct mlx4_ib_fast_reg_page_list *mfrpl;
+	int size = page_list_len * sizeof (u64);
+
+	if (size > PAGE_SIZE)
+		return ERR_PTR(-EINVAL);
+
+	mfrpl = kmalloc(sizeof *mfrpl, GFP_KERNEL);
+	if (!mfrpl)
+		return ERR_PTR(-ENOMEM);
+
+	mfrpl->ibfrpl.page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
+						     size, &mfrpl->map,
+						     GFP_KERNEL);
+	if (!mfrpl->ibfrpl.page_list)
+		goto err_free;
+
+	WARN_ON(mfrpl->map & 0x3f);
+
+	return &mfrpl->ibfrpl;
+
+err_free:
+	kfree(mfrpl);
+	return ERR_PTR(-ENOMEM);
+}
+
+void mlx4_ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list)
+{
+	struct mlx4_ib_dev *dev = to_mdev(page_list->device);
+	struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(page_list);
+	int size = page_list->max_page_list_len * sizeof (u64);
+
+	dma_free_coherent(&dev->dev->pdev->dev, size, page_list->page_list,
+			  mfrpl->map);
+	kfree(mfrpl);
+}
+
 struct ib_fmr *mlx4_ib_fmr_alloc(struct ib_pd *pd, int acc,
 				 struct ib_fmr_attr *fmr_attr)
 {
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index bda0859a5ac..02a99bc4442 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -78,6 +78,9 @@ static const __be32 mlx4_ib_opcode[] = {
 	[IB_WR_RDMA_READ]		= __constant_cpu_to_be32(MLX4_OPCODE_RDMA_READ),
 	[IB_WR_ATOMIC_CMP_AND_SWP]	= __constant_cpu_to_be32(MLX4_OPCODE_ATOMIC_CS),
 	[IB_WR_ATOMIC_FETCH_AND_ADD]	= __constant_cpu_to_be32(MLX4_OPCODE_ATOMIC_FA),
+	[IB_WR_SEND_WITH_INV]		= __constant_cpu_to_be32(MLX4_OPCODE_SEND_INVAL),
+	[IB_WR_LOCAL_INV]		= __constant_cpu_to_be32(MLX4_OPCODE_LOCAL_INVAL),
+	[IB_WR_FAST_REG_MR]		= __constant_cpu_to_be32(MLX4_OPCODE_FMR),
 };
 
 static struct mlx4_ib_sqp *to_msqp(struct mlx4_ib_qp *mqp)
@@ -976,6 +979,10 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp,
 	context->pd	    = cpu_to_be32(to_mpd(ibqp->pd)->pdn);
 	context->params1    = cpu_to_be32(MLX4_IB_ACK_REQ_FREQ << 28);
 
+	/* Set "fast registration enabled" for all kernel QPs */
+	if (!qp->ibqp.uobject)
+		context->params1 |= cpu_to_be32(1 << 11);
+
 	if (attr_mask & IB_QP_RNR_RETRY) {
 		context->params1 |= cpu_to_be32(attr->rnr_retry << 13);
 		optpar |= MLX4_QP_OPTPAR_RNR_RETRY;
@@ -1322,6 +1329,38 @@ static int mlx4_wq_overflow(struct mlx4_ib_wq *wq, int nreq, struct ib_cq *ib_cq
 	return cur + nreq >= wq->max_post;
 }
 
+static __be32 convert_access(int acc)
+{
+	return (acc & IB_ACCESS_REMOTE_ATOMIC ? cpu_to_be32(MLX4_WQE_FMR_PERM_ATOMIC)       : 0) |
+	       (acc & IB_ACCESS_REMOTE_WRITE  ? cpu_to_be32(MLX4_WQE_FMR_PERM_REMOTE_WRITE) : 0) |
+	       (acc & IB_ACCESS_REMOTE_READ   ? cpu_to_be32(MLX4_WQE_FMR_PERM_REMOTE_READ)  : 0) |
+	       (acc & IB_ACCESS_LOCAL_WRITE   ? cpu_to_be32(MLX4_WQE_FMR_PERM_LOCAL_WRITE)  : 0) |
+		cpu_to_be32(MLX4_WQE_FMR_PERM_LOCAL_READ);
+}
+
+static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr)
+{
+	struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(wr->wr.fast_reg.page_list);
+
+	fseg->flags		= convert_access(wr->wr.fast_reg.access_flags);
+	fseg->mem_key		= cpu_to_be32(wr->wr.fast_reg.rkey);
+	fseg->buf_list		= cpu_to_be64(mfrpl->map);
+	fseg->start_addr	= cpu_to_be64(wr->wr.fast_reg.iova_start);
+	fseg->reg_len		= cpu_to_be64(wr->wr.fast_reg.length);
+	fseg->offset		= 0; /* XXX -- is this just for ZBVA? */
+	fseg->page_size		= cpu_to_be32(wr->wr.fast_reg.page_shift);
+	fseg->reserved[0]	= 0;
+	fseg->reserved[1]	= 0;
+}
+
+static void set_local_inv_seg(struct mlx4_wqe_local_inval_seg *iseg, u32 rkey)
+{
+	iseg->flags	= 0;
+	iseg->mem_key	= cpu_to_be32(rkey);
+	iseg->guest_id	= 0;
+	iseg->pa	= 0;
+}
+
 static __always_inline void set_raddr_seg(struct mlx4_wqe_raddr_seg *rseg,
 					  u64 remote_addr, u32 rkey)
 {
@@ -1423,6 +1462,21 @@ static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr,
 	return 0;
 }
 
+static __be32 send_ieth(struct ib_send_wr *wr)
+{
+	switch (wr->opcode) {
+	case IB_WR_SEND_WITH_IMM:
+	case IB_WR_RDMA_WRITE_WITH_IMM:
+		return wr->ex.imm_data;
+
+	case IB_WR_SEND_WITH_INV:
+		return cpu_to_be32(wr->ex.invalidate_rkey);
+
+	default:
+		return 0;
+	}
+}
+
 int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		      struct ib_send_wr **bad_wr)
 {
@@ -1469,11 +1523,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 				     MLX4_WQE_CTRL_TCP_UDP_CSUM) : 0) |
 			qp->sq_signal_bits;
 
-		if (wr->opcode == IB_WR_SEND_WITH_IMM ||
-		    wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM)
-			ctrl->imm = wr->ex.imm_data;
-		else
-			ctrl->imm = 0;
+		ctrl->imm = send_ieth(wr);
 
 		wqe += sizeof *ctrl;
 		size = sizeof *ctrl / 16;
@@ -1505,6 +1555,18 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 				size += sizeof (struct mlx4_wqe_raddr_seg) / 16;
 				break;
 
+			case IB_WR_LOCAL_INV:
+				set_local_inv_seg(wqe, wr->ex.invalidate_rkey);
+				wqe  += sizeof (struct mlx4_wqe_local_inval_seg);
+				size += sizeof (struct mlx4_wqe_local_inval_seg) / 16;
+				break;
+
+			case IB_WR_FAST_REG_MR:
+				set_fmr_seg(wqe, wr);
+				wqe  += sizeof (struct mlx4_wqe_fmr_seg);
+				size += sizeof (struct mlx4_wqe_fmr_seg) / 16;
+				break;
+
 			default:
 				/* No extra segments required for sends */
 				break;
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index 0851ebdddfd..57278224ba1 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -202,7 +202,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 #define QUERY_DEV_CAP_C_MPT_ENTRY_SZ_OFFSET	0x8e
 #define QUERY_DEV_CAP_MTT_ENTRY_SZ_OFFSET	0x90
 #define QUERY_DEV_CAP_D_MPT_ENTRY_SZ_OFFSET	0x92
-#define QUERY_DEV_CAP_BMME_FLAGS_OFFSET		0x97
+#define QUERY_DEV_CAP_BMME_FLAGS_OFFSET		0x94
 #define QUERY_DEV_CAP_RSVD_LKEY_OFFSET		0x98
 #define QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET		0xa0
 
@@ -377,12 +377,8 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 		}
 	}
 
-	if (dev_cap->bmme_flags & 1)
-		mlx4_dbg(dev, "Base MM extensions: yes "
-			 "(flags %d, rsvd L_Key %08x)\n",
-			 dev_cap->bmme_flags, dev_cap->reserved_lkey);
-	else
-		mlx4_dbg(dev, "Base MM extensions: no\n");
+	mlx4_dbg(dev, "Base MM extensions: flags %08x, rsvd L_Key %08x\n",
+		 dev_cap->bmme_flags, dev_cap->reserved_lkey);
 
 	/*
 	 * Each UAR has 4 EQ doorbells; so if a UAR is reserved, then
diff --git a/drivers/net/mlx4/fw.h b/drivers/net/mlx4/fw.h
index a0e046c149b..fbf0e22be12 100644
--- a/drivers/net/mlx4/fw.h
+++ b/drivers/net/mlx4/fw.h
@@ -98,7 +98,7 @@ struct mlx4_dev_cap {
 	int cmpt_entry_sz;
 	int mtt_entry_sz;
 	int resize_srq;
-	u8  bmme_flags;
+	u32 bmme_flags;
 	u32 reserved_lkey;
 	u64 max_icm_sz;
 	int max_gso_sz;
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index d3736013fe9..8e1d24cda1b 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -158,6 +158,8 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 	dev->caps.max_msg_sz         = dev_cap->max_msg_sz;
 	dev->caps.page_size_cap	     = ~(u32) (dev_cap->min_page_sz - 1);
 	dev->caps.flags		     = dev_cap->flags;
+	dev->caps.bmme_flags	     = dev_cap->bmme_flags;
+	dev->caps.reserved_lkey	     = dev_cap->reserved_lkey;
 	dev->caps.stat_rate_support  = dev_cap->stat_rate_support;
 	dev->caps.max_gso_sz	     = dev_cap->max_gso_sz;
 
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index b3ea93b9868..a3c04c5f12c 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -47,7 +47,7 @@ struct mlx4_mpt_entry {
 	__be32 flags;
 	__be32 qpn;
 	__be32 key;
-	__be32 pd;
+	__be32 pd_flags;
 	__be64 start;
 	__be64 length;
 	__be32 lkey;
@@ -61,11 +61,15 @@ struct mlx4_mpt_entry {
 } __attribute__((packed));
 
 #define MLX4_MPT_FLAG_SW_OWNS	    (0xfUL << 28)
+#define MLX4_MPT_FLAG_FREE	    (0x3UL << 28)
 #define MLX4_MPT_FLAG_MIO	    (1 << 17)
 #define MLX4_MPT_FLAG_BIND_ENABLE   (1 << 15)
 #define MLX4_MPT_FLAG_PHYSICAL	    (1 <<  9)
 #define MLX4_MPT_FLAG_REGION	    (1 <<  8)
 
+#define MLX4_MPT_PD_FLAG_FAST_REG   (1 << 26)
+#define MLX4_MPT_PD_FLAG_EN_INV	    (3 << 24)
+
 #define MLX4_MTT_FLAG_PRESENT		1
 
 #define MLX4_MPT_STATUS_SW		0xF0
@@ -324,21 +328,30 @@ int mlx4_mr_enable(struct mlx4_dev *dev, struct mlx4_mr *mr)
 
 	memset(mpt_entry, 0, sizeof *mpt_entry);
 
-	mpt_entry->flags = cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS	 |
-				       MLX4_MPT_FLAG_MIO	 |
+	mpt_entry->flags = cpu_to_be32(MLX4_MPT_FLAG_MIO	 |
 				       MLX4_MPT_FLAG_REGION	 |
 				       mr->access);
 
 	mpt_entry->key	       = cpu_to_be32(key_to_hw_index(mr->key));
-	mpt_entry->pd	       = cpu_to_be32(mr->pd);
+	mpt_entry->pd_flags    = cpu_to_be32(mr->pd | MLX4_MPT_PD_FLAG_EN_INV);
 	mpt_entry->start       = cpu_to_be64(mr->iova);
 	mpt_entry->length      = cpu_to_be64(mr->size);
 	mpt_entry->entity_size = cpu_to_be32(mr->mtt.page_shift);
+
 	if (mr->mtt.order < 0) {
 		mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_PHYSICAL);
 		mpt_entry->mtt_seg = 0;
-	} else
+	} else {
 		mpt_entry->mtt_seg = cpu_to_be64(mlx4_mtt_addr(dev, &mr->mtt));
+	}
+
+	if (mr->mtt.order >= 0 && mr->mtt.page_shift == 0) {
+		/* fast register MR in free state */
+		mpt_entry->flags    |= cpu_to_be32(MLX4_MPT_FLAG_FREE);
+		mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG);
+	} else {
+		mpt_entry->flags    |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS);
+	}
 
 	err = mlx4_SW2HW_MPT(dev, mailbox,
 			     key_to_hw_index(mr->key) & (dev->caps.num_mpts - 1));
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 81b3dd5206e..655ea0d1ee1 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -68,6 +68,14 @@ enum {
 	MLX4_DEV_CAP_FLAG_UD_MCAST	= 1 << 21
 };
 
+enum {
+	MLX4_BMME_FLAG_LOCAL_INV	= 1 <<  6,
+	MLX4_BMME_FLAG_REMOTE_INV	= 1 <<  7,
+	MLX4_BMME_FLAG_TYPE_2_WIN	= 1 <<  9,
+	MLX4_BMME_FLAG_RESERVED_LKEY	= 1 << 10,
+	MLX4_BMME_FLAG_FAST_REG_WR	= 1 << 11,
+};
+
 enum mlx4_event {
 	MLX4_EVENT_TYPE_COMP		   = 0x00,
 	MLX4_EVENT_TYPE_PATH_MIG	   = 0x01,
@@ -184,6 +192,8 @@ struct mlx4_caps {
 	u32			max_msg_sz;
 	u32			page_size_cap;
 	u32			flags;
+	u32			bmme_flags;
+	u32			reserved_lkey;
 	u16			stat_rate_support;
 	u8			port_width_cap[MLX4_MAX_PORTS + 1];
 	int			max_gso_sz;
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index f02e9ed36cf..e27082cd650 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -233,6 +233,14 @@ struct mlx4_wqe_bind_seg {
 	__be64			length;
 };
 
+enum {
+	MLX4_WQE_FMR_PERM_LOCAL_READ	= 1 << 27,
+	MLX4_WQE_FMR_PERM_LOCAL_WRITE	= 1 << 28,
+	MLX4_WQE_FMR_PERM_REMOTE_READ	= 1 << 29,
+	MLX4_WQE_FMR_PERM_REMOTE_WRITE	= 1 << 30,
+	MLX4_WQE_FMR_PERM_ATOMIC	= 1 << 31
+};
+
 struct mlx4_wqe_fmr_seg {
 	__be32			flags;
 	__be32			mem_key;
@@ -255,11 +263,11 @@ struct mlx4_wqe_fmr_ext_seg {
 };
 
 struct mlx4_wqe_local_inval_seg {
-	u8			flags;
-	u8			reserved1[3];
+	__be32			flags;
+	u32			reserved1;
 	__be32			mem_key;
-	u8			reserved2[3];
-	u8			guest_id;
+	u32			reserved2[2];
+	__be32			guest_id;
 	__be64			pa;
 };
 
-- 
cgit v1.2.3


From 76442640829163d0cdb67c2bf0cb4b81a0fe537b Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Wed, 23 Jul 2008 08:12:47 -0700
Subject: mlx4_core: Improve error message when not enough UAR pages are
 available

If an mlx4 device with default FW (which gives a UAR BAR size of 8 MB)
is used in a system with 64 KB pages, then there are only 8192/64==128
UAR pages available.  However, the first 128 UAR pages are reserved
for use with event queue doorbells, so no UAR pages are available to
do anything else with, which means that the driver cannot work.

The current driver fails with a fairly cryptic "Failed to allocate
driver access region, aborting" message in this situation.  Fix the
driver to detect the problem earlier and print out a clearer
description of the problem and a suggestion of how to fix it (use a
new firmware image).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/net/mlx4/pd.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/mlx4/pd.c b/drivers/net/mlx4/pd.c
index 3a93c5f0f7a..aa616892d09 100644
--- a/drivers/net/mlx4/pd.c
+++ b/drivers/net/mlx4/pd.c
@@ -91,6 +91,13 @@ EXPORT_SYMBOL_GPL(mlx4_uar_free);
 
 int mlx4_init_uar_table(struct mlx4_dev *dev)
 {
+	if (dev->caps.num_uars <= 128) {
+		mlx4_err(dev, "Only %d UAR pages (need more than 128)\n",
+			 dev->caps.num_uars);
+		mlx4_err(dev, "Increase firmware log2_uar_bar_megabytes?\n");
+		return -ENODEV;
+	}
+
 	return mlx4_bitmap_init(&mlx4_priv(dev)->uar_table.bitmap,
 				dev->caps.num_uars, dev->caps.num_uars - 1,
 				max(128, dev->caps.reserved_uars));
-- 
cgit v1.2.3


From 68afab1cb31436fc9b256a5f44771fa58ed019e2 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 23 Jul 2008 11:30:15 -0500
Subject: kgdb: remove unused HAVE_ARCH_KGDB_SHADOW_INFO config variable

Remove HAVE_ARCH_KGDB_SHADOW_INFO because it does not
exist anywhere in the kernel mainline sources

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 lib/Kconfig.kgdb | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index a5d4b1dac2a..2cfd2721f7e 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -1,7 +1,4 @@
 
-config HAVE_ARCH_KGDB_SHADOW_INFO
-	bool
-
 config HAVE_ARCH_KGDB
 	bool
 
-- 
cgit v1.2.3


From 5cbad0ebf45c5417104b383dc0e34f64fa7f2473 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 20 Feb 2008 13:33:40 -0600
Subject: kgdb: support for ARCH=arm

This patch adds the ARCH=arm specific a kgdb backend, originally
written by Deepak Saxena <dsaxena@plexity.net> and George Davis
<gdavis@mvista.com>.  Geoff Levand <geoffrey.levand@am.sony.com>,
Nicolas Pitre, Manish Lachwani, and Jason Wessel have contributed
various fixups here as well.

The KGDB patch makes one change to the core ARM architecture such that
the traps are initialized early for use with the debugger or other
subsystems.

[ mingo@elte.hu: small cleanups. ]
[ ben-linux@fluff.org: fixed early_trap_init ]

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Deepak Saxena <dsaxena@plexity.net>
---
 arch/arm/Kconfig         |   1 +
 arch/arm/kernel/Makefile |   1 +
 arch/arm/kernel/kgdb.c   | 201 +++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/kernel/setup.c  |   2 +
 arch/arm/kernel/traps.c  |   5 ++
 include/asm-arm/kgdb.h   | 104 ++++++++++++++++++++++++
 include/asm-arm/traps.h  |   2 +
 7 files changed, 316 insertions(+)
 create mode 100644 arch/arm/kernel/kgdb.c
 create mode 100644 include/asm-arm/kgdb.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c7ad324ddf2..d048f6887d0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@ config ARM
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FTRACE if (!XIP_KERNEL)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index eb9092ca800..1d296fc8494 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
new file mode 100644
index 00000000000..aaffaecffcd
--- /dev/null
+++ b/arch/arm/kernel/kgdb.c
@@ -0,0 +1,201 @@
+/*
+ * arch/arm/kernel/kgdb.c
+ *
+ * ARM KGDB support
+ *
+ * Copyright (c) 2002-2004 MontaVista Software, Inc
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:  George Davis <davis_g@mvista.com>
+ *           Deepak Saxena <dsaxena@plexity.net>
+ */
+#include <linux/kgdb.h>
+#include <asm/traps.h>
+
+/* Make a local copy of the registers passed into the handler (bletch) */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	int regno;
+
+	/* Initialize all to zero. */
+	for (regno = 0; regno < GDB_MAX_REGS; regno++)
+		gdb_regs[regno] = 0;
+
+	gdb_regs[_R0]		= kernel_regs->ARM_r0;
+	gdb_regs[_R1]		= kernel_regs->ARM_r1;
+	gdb_regs[_R2]		= kernel_regs->ARM_r2;
+	gdb_regs[_R3]		= kernel_regs->ARM_r3;
+	gdb_regs[_R4]		= kernel_regs->ARM_r4;
+	gdb_regs[_R5]		= kernel_regs->ARM_r5;
+	gdb_regs[_R6]		= kernel_regs->ARM_r6;
+	gdb_regs[_R7]		= kernel_regs->ARM_r7;
+	gdb_regs[_R8]		= kernel_regs->ARM_r8;
+	gdb_regs[_R9]		= kernel_regs->ARM_r9;
+	gdb_regs[_R10]		= kernel_regs->ARM_r10;
+	gdb_regs[_FP]		= kernel_regs->ARM_fp;
+	gdb_regs[_IP]		= kernel_regs->ARM_ip;
+	gdb_regs[_SPT]		= kernel_regs->ARM_sp;
+	gdb_regs[_LR]		= kernel_regs->ARM_lr;
+	gdb_regs[_PC]		= kernel_regs->ARM_pc;
+	gdb_regs[_CPSR]		= kernel_regs->ARM_cpsr;
+}
+
+/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	kernel_regs->ARM_r0	= gdb_regs[_R0];
+	kernel_regs->ARM_r1	= gdb_regs[_R1];
+	kernel_regs->ARM_r2	= gdb_regs[_R2];
+	kernel_regs->ARM_r3	= gdb_regs[_R3];
+	kernel_regs->ARM_r4	= gdb_regs[_R4];
+	kernel_regs->ARM_r5	= gdb_regs[_R5];
+	kernel_regs->ARM_r6	= gdb_regs[_R6];
+	kernel_regs->ARM_r7	= gdb_regs[_R7];
+	kernel_regs->ARM_r8	= gdb_regs[_R8];
+	kernel_regs->ARM_r9	= gdb_regs[_R9];
+	kernel_regs->ARM_r10	= gdb_regs[_R10];
+	kernel_regs->ARM_fp	= gdb_regs[_FP];
+	kernel_regs->ARM_ip	= gdb_regs[_IP];
+	kernel_regs->ARM_sp	= gdb_regs[_SPT];
+	kernel_regs->ARM_lr	= gdb_regs[_LR];
+	kernel_regs->ARM_pc	= gdb_regs[_PC];
+	kernel_regs->ARM_cpsr	= gdb_regs[_CPSR];
+}
+
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+	struct pt_regs *thread_regs;
+	int regno;
+
+	/* Just making sure... */
+	if (task == NULL)
+		return;
+
+	/* Initialize to zero */
+	for (regno = 0; regno < GDB_MAX_REGS; regno++)
+		gdb_regs[regno] = 0;
+
+	/* Otherwise, we have only some registers from switch_to() */
+	thread_regs		= task_pt_regs(task);
+	gdb_regs[_R0]		= thread_regs->ARM_r0;
+	gdb_regs[_R1]		= thread_regs->ARM_r1;
+	gdb_regs[_R2]		= thread_regs->ARM_r2;
+	gdb_regs[_R3]		= thread_regs->ARM_r3;
+	gdb_regs[_R4]		= thread_regs->ARM_r4;
+	gdb_regs[_R5]		= thread_regs->ARM_r5;
+	gdb_regs[_R6]		= thread_regs->ARM_r6;
+	gdb_regs[_R7]		= thread_regs->ARM_r7;
+	gdb_regs[_R8]		= thread_regs->ARM_r8;
+	gdb_regs[_R9]		= thread_regs->ARM_r9;
+	gdb_regs[_R10]		= thread_regs->ARM_r10;
+	gdb_regs[_FP]		= thread_regs->ARM_fp;
+	gdb_regs[_IP]		= thread_regs->ARM_ip;
+	gdb_regs[_SPT]		= thread_regs->ARM_sp;
+	gdb_regs[_LR]		= thread_regs->ARM_lr;
+	gdb_regs[_PC]		= thread_regs->ARM_pc;
+	gdb_regs[_CPSR]		= thread_regs->ARM_cpsr;
+}
+
+static int compiled_break;
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+			       int err_code, char *remcom_in_buffer,
+			       char *remcom_out_buffer,
+			       struct pt_regs *linux_regs)
+{
+	unsigned long addr;
+	char *ptr;
+
+	switch (remcom_in_buffer[0]) {
+	case 'D':
+	case 'k':
+	case 'c':
+		kgdb_contthread = NULL;
+
+		/*
+		 * Try to read optional parameter, pc unchanged if no parm.
+		 * If this was a compiled breakpoint, we need to move
+		 * to the next instruction or we will just breakpoint
+		 * over and over again.
+		 */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->ARM_pc = addr;
+		else if (compiled_break == 1)
+			linux_regs->ARM_pc += 4;
+
+		compiled_break = 0;
+
+		return 0;
+	}
+
+	return -1;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+	return 0;
+}
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+	compiled_break = 1;
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+	return 0;
+}
+
+static struct undef_hook kgdb_brkpt_hook = {
+	.instr_mask		= 0xffffffff,
+	.instr_val		= KGDB_BREAKINST,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_hook = {
+	.instr_mask		= 0xffffffff,
+	.instr_val		= KGDB_COMPILED_BREAK,
+	.fn			= kgdb_compiled_brk_fn
+};
+
+/**
+ *	kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ *	This function will handle the initalization of any architecture
+ *	specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+	register_undef_hook(&kgdb_brkpt_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_hook);
+
+	return 0;
+}
+
+/**
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_undef_hook(&kgdb_brkpt_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+}
+
+/*
+ * Register our undef instruction hooks with ARM undef core.
+ * We regsiter a hook specifically looking for the KGB break inst
+ * and we handle the normal undef case within the do_undefinstr
+ * handler.
+ */
+struct kgdb_arch arch_kgdb_ops = {
+#ifndef __ARMEB__
+	.gdb_bpt_instr		= {0xfe, 0xde, 0xff, 0xe7}
+#else /* ! __ARMEB__ */
+	.gdb_bpt_instr		= {0xe7, 0xff, 0xde, 0xfe}
+#endif
+};
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b7b0720bc1b..38f0e7940a1 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <asm/traps.h>
 
 #include "compat.h"
 #include "atags.h"
@@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &dummy_con;
 #endif
 #endif
+	early_trap_init();
 }
 
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 5595fdd75e8..7277aef8309 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -707,6 +707,11 @@ void abort(void)
 EXPORT_SYMBOL(abort);
 
 void __init trap_init(void)
+{
+	return;
+}
+
+void __init early_trap_init(void)
 {
 	unsigned long vectors = CONFIG_VECTORS_BASE;
 	extern char __stubs_start[], __stubs_end[];
diff --git a/include/asm-arm/kgdb.h b/include/asm-arm/kgdb.h
new file mode 100644
index 00000000000..67af4b84198
--- /dev/null
+++ b/include/asm-arm/kgdb.h
@@ -0,0 +1,104 @@
+/*
+ * ARM KGDB support
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ *
+ */
+
+#ifndef __ARM_KGDB_H__
+#define __ARM_KGDB_H__
+
+#include <linux/ptrace.h>
+
+/*
+ * GDB assumes that we're a user process being debugged, so
+ * it will send us an SWI command to write into memory as the
+ * debug trap. When an SWI occurs, the next instruction addr is
+ * placed into R14_svc before jumping to the vector trap.
+ * This doesn't work for kernel debugging as we are already in SVC
+ * we would loose the kernel's LR, which is a bad thing. This
+ * is  bad thing.
+ *
+ * By doing this as an undefined instruction trap, we force a mode
+ * switch from SVC to UND mode, allowing us to save full kernel state.
+ *
+ * We also define a KGDB_COMPILED_BREAK which can be used to compile
+ * in breakpoints. This is important for things like sysrq-G and for
+ * the initial breakpoint from trap_init().
+ *
+ * Note to ARM HW designers: Add real trap support like SH && PPC to
+ * make our lives much much simpler. :)
+ */
+#define BREAK_INSTR_SIZE	4
+#define GDB_BREAKINST		0xef9f0001
+#define KGDB_BREAKINST		0xe7ffdefe
+#define KGDB_COMPILED_BREAK	0xe7ffdeff
+#define CACHE_FLUSH_IS_SAFE	1
+
+#ifndef	__ASSEMBLY__
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".word 0xe7ffdeff");
+}
+
+extern void kgdb_handle_bus_error(void);
+extern int kgdb_fault_expected;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * From Kevin Hilman:
+ *
+ * gdb is expecting the following registers layout.
+ *
+ * r0-r15: 1 long word each
+ * f0-f7:  unused, 3 long words each !!
+ * fps:    unused, 1 long word
+ * cpsr:   1 long word
+ *
+ * Even though f0-f7 and fps are not used, they need to be
+ * present in the registers sent for correct processing in
+ * the host-side gdb.
+ *
+ * In particular, it is crucial that CPSR is in the right place,
+ * otherwise gdb will not be able to correctly interpret stepping over
+ * conditional branches.
+ */
+#define _GP_REGS		16
+#define _FP_REGS		8
+#define _EXTRA_REGS		2
+#define GDB_MAX_REGS		(_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
+
+#define KGDB_MAX_NO_CPUS	1
+#define BUFMAX			400
+#define NUMREGBYTES		(GDB_MAX_REGS << 2)
+#define NUMCRITREGBYTES		(32 << 2)
+
+#define _R0			0
+#define _R1			1
+#define _R2			2
+#define _R3			3
+#define _R4			4
+#define _R5			5
+#define _R6			6
+#define _R7			7
+#define _R8			8
+#define _R9			9
+#define _R10			10
+#define _FP			11
+#define _IP			12
+#define _SPT			13
+#define _LR			14
+#define _PC			15
+#define _CPSR			(GDB_MAX_REGS - 1)
+
+/*
+ * So that we can denote the end of a frame for tracing,
+ * in the simple case:
+ */
+#define CFI_END_FRAME(func)	__CFI_END_FRAME(_PC, _SPT, func)
+
+#endif /* __ASM_KGDB_H__ */
diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h
index f1541afcf85..aa399aec568 100644
--- a/include/asm-arm/traps.h
+++ b/include/asm-arm/traps.h
@@ -24,4 +24,6 @@ static inline int in_exception_text(unsigned long ptr)
 	       ptr < (unsigned long)&__exception_text_end;
 }
 
+extern void __init early_trap_init(void);
+
 #endif
-- 
cgit v1.2.3


From 17ce452f7ea3df760b7f9f42453b6f6acd765217 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 23 Jul 2008 11:30:15 -0500
Subject: kgdb, powerpc: arch specific powerpc kgdb support

This patch removes the old kgdb reminants from ARCH=powerpc and
implements the new style arch specific stub for the common kgdb core
interface.

It is possible to have xmon and kgdb in the same kernel, but you
cannot use both at the same time because there is only one set of
debug hooks.

The arch specific kgdb implementation saves the previous state of the
debug hooks and restores them if you unconfigure the kgdb I/O driver.
Kgdb should have no impact on a kernel that has no kgdb I/O driver
configured.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 arch/powerpc/Kconfig                    |   1 +
 arch/powerpc/Kconfig.debug              |  50 +---
 arch/powerpc/kernel/Makefile            |   1 +
 arch/powerpc/kernel/kgdb.c              | 410 ++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/setup_32.c          |  16 --
 arch/powerpc/platforms/powermac/setup.c |   6 -
 include/asm-powerpc/kgdb.h              |  92 +++----
 7 files changed, 468 insertions(+), 108 deletions(-)
 create mode 100644 arch/powerpc/kernel/kgdb.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4c22242b396..737ebf9d12b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -112,6 +112,7 @@ config PPC
 	select HAVE_FTRACE
 	select HAVE_IDE
 	select HAVE_KPROBES
+	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
 	select HAVE_LMB
 	select HAVE_DMA_ATTRS if PPC64
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 2840ab69ef4..8c8aadbe956 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -41,22 +41,6 @@ config HCALL_STATS
 	  This option will add a small amount of overhead to all hypervisor
 	  calls.
 
-config DEBUGGER
-	bool "Enable debugger hooks"
-	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel hooks for kernel debuggers. Unless you are
-	  intending to debug the kernel, say N here.
-
-config KGDB
-	bool "Include kgdb kernel debugger"
-	depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
-	select DEBUG_INFO
-	help
-	  Include in-kernel hooks for kgdb, the Linux kernel source level
-	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
-	  Unless you are intending to debug the kernel, say N here.
-
 config CODE_PATCHING_SELFTEST
 	bool "Run self-tests of the code-patching code."
 	depends on DEBUG_KERNEL
@@ -67,36 +51,9 @@ config FTR_FIXUP_SELFTEST
 	depends on DEBUG_KERNEL
 	default n
 
-choice
-	prompt "Serial Port"
-	depends on KGDB
-	default KGDB_TTYS1
-
-config KGDB_TTYS0
-	bool "ttyS0"
-
-config KGDB_TTYS1
-	bool "ttyS1"
-
-config KGDB_TTYS2
-	bool "ttyS2"
-
-config KGDB_TTYS3
-	bool "ttyS3"
-
-endchoice
-
-config KGDB_CONSOLE
-	bool "Enable serial console thru kgdb port"
-	depends on KGDB && 8xx || CPM2
-	help
-	  If you enable this, all serial console messages will be sent
-	  over the gdb stub.
-	  If unsure, say N.
-
 config XMON
 	bool "Include xmon kernel debugger"
-	depends on DEBUGGER
+	depends on DEBUG_KERNEL
 	help
 	  Include in-kernel hooks for the xmon kernel monitor/debugger.
 	  Unless you are intending to debug the kernel, say N here.
@@ -126,6 +83,11 @@ config XMON_DISASSEMBLY
 	  to say Y here, unless you're building for a memory-constrained
 	  system.
 
+config DEBUGGER
+	bool
+	depends on KGDB || XMON
+	default y
+
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	help
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index bf0b1fd0ec3..1a4094704b1 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -74,6 +74,7 @@ obj-y				+= time.o prom.o traps.o setup-common.o \
 				   misc_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o
 obj-$(CONFIG_PPC64)		+= dma_64.o iommu.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
new file mode 100644
index 00000000000..b4fdf2f2743
--- /dev/null
+++ b/arch/powerpc/kernel/kgdb.c
@@ -0,0 +1,410 @@
+/*
+ * PowerPC backend to the KGDB stub.
+ *
+ * 1998 (c) Michael AK Tesch (tesch@cs.wisc.edu)
+ * Copyright (C) 2003 Timesys Corporation.
+ * Copyright (C) 2004-2006 MontaVista Software, Inc.
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC32 support restored by Vitaly Wool <vwool@ru.mvista.com> and
+ * Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ * Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program as licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/smp.h>
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+
+/*
+ * This table contains the mapping between PowerPC hardware trap types, and
+ * signals, which are primarily what GDB understands.  GDB and the kernel
+ * don't always agree on values, so we use constants taken from gdb-6.2.
+ */
+static struct hard_trap_info
+{
+	unsigned int tt;		/* Trap type code for powerpc */
+	unsigned char signo;		/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 0x0100, 0x02 /* SIGINT */  },		/* system reset */
+	{ 0x0200, 0x0b /* SIGSEGV */ },		/* machine check */
+	{ 0x0300, 0x0b /* SIGSEGV */ },		/* data access */
+	{ 0x0400, 0x0b /* SIGSEGV */ },		/* instruction access */
+	{ 0x0500, 0x02 /* SIGINT */  },		/* external interrupt */
+	{ 0x0600, 0x0a /* SIGBUS */  },		/* alignment */
+	{ 0x0700, 0x05 /* SIGTRAP */ },		/* program check */
+	{ 0x0800, 0x08 /* SIGFPE */  },		/* fp unavailable */
+	{ 0x0900, 0x0e /* SIGALRM */ },		/* decrementer */
+	{ 0x0c00, 0x14 /* SIGCHLD */ },		/* system call */
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+	{ 0x2002, 0x05 /* SIGTRAP */ },		/* debug */
+#if defined(CONFIG_FSL_BOOKE)
+	{ 0x2010, 0x08 /* SIGFPE */  },		/* spe unavailable */
+	{ 0x2020, 0x08 /* SIGFPE */  },		/* spe unavailable */
+	{ 0x2030, 0x08 /* SIGFPE */  },		/* spe fp data */
+	{ 0x2040, 0x08 /* SIGFPE */  },		/* spe fp data */
+	{ 0x2050, 0x08 /* SIGFPE */  },		/* spe fp round */
+	{ 0x2060, 0x0e /* SIGILL */  },		/* performace monitor */
+	{ 0x2900, 0x08 /* SIGFPE */  },		/* apu unavailable */
+	{ 0x3100, 0x0e /* SIGALRM */ },		/* fixed interval timer */
+	{ 0x3200, 0x02 /* SIGINT */  }, 	/* watchdog */
+#else /* ! CONFIG_FSL_BOOKE */
+	{ 0x1000, 0x0e /* SIGALRM */ },		/* prog interval timer */
+	{ 0x1010, 0x0e /* SIGALRM */ },		/* fixed interval timer */
+	{ 0x1020, 0x02 /* SIGINT */  }, 	/* watchdog */
+	{ 0x2010, 0x08 /* SIGFPE */  },		/* fp unavailable */
+	{ 0x2020, 0x08 /* SIGFPE */  },		/* ap unavailable */
+#endif
+#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */
+	{ 0x0d00, 0x05 /* SIGTRAP */ },		/* single-step */
+#if defined(CONFIG_8xx)
+	{ 0x1000, 0x04 /* SIGILL */  },		/* software emulation */
+#else /* ! CONFIG_8xx */
+	{ 0x0f00, 0x04 /* SIGILL */  },		/* performance monitor */
+	{ 0x0f20, 0x08 /* SIGFPE */  },		/* altivec unavailable */
+	{ 0x1300, 0x05 /* SIGTRAP */ }, 	/* instruction address break */
+#if defined(CONFIG_PPC64)
+	{ 0x1200, 0x05 /* SIGILL */  },		/* system error */
+	{ 0x1500, 0x04 /* SIGILL */  },		/* soft patch */
+	{ 0x1600, 0x04 /* SIGILL */  },		/* maintenance */
+	{ 0x1700, 0x08 /* SIGFPE */  },		/* altivec assist */
+	{ 0x1800, 0x04 /* SIGILL */  },		/* thermal */
+#else /* ! CONFIG_PPC64 */
+	{ 0x1400, 0x02 /* SIGINT */  },		/* SMI */
+	{ 0x1600, 0x08 /* SIGFPE */  },		/* altivec assist */
+	{ 0x1700, 0x04 /* SIGILL */  },		/* TAU */
+	{ 0x2000, 0x05 /* SIGTRAP */ },		/* run mode */
+#endif
+#endif
+#endif
+	{ 0x0000, 0x00 }			/* Must be last */
+};
+
+static int computeSignal(unsigned int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+static int kgdb_call_nmi_hook(struct pt_regs *regs)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), regs);
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	smp_send_debugger_break(MSG_ALL_BUT_SELF);
+}
+#endif
+
+/* KGDB functions to use existing PowerPC64 hooks. */
+static int kgdb_debugger(struct pt_regs *regs)
+{
+	return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
+}
+
+static int kgdb_handle_breakpoint(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
+		return 0;
+
+	if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
+		regs->nip += 4;
+
+	return 1;
+}
+
+static int kgdb_singlestep(struct pt_regs *regs)
+{
+	struct thread_info *thread_info, *exception_thread_info;
+
+	if (user_mode(regs))
+		return 0;
+
+	/*
+	 * On Book E and perhaps other processsors, singlestep is handled on
+	 * the critical exception stack.  This causes current_thread_info()
+	 * to fail, since it it locates the thread_info by masking off
+	 * the low bits of the current stack pointer.  We work around
+	 * this issue by copying the thread_info from the kernel stack
+	 * before calling kgdb_handle_exception, and copying it back
+	 * afterwards.  On most processors the copy is avoided since
+	 * exception_thread_info == thread_info.
+	 */
+	thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
+	exception_thread_info = current_thread_info();
+
+	if (thread_info != exception_thread_info)
+		memcpy(exception_thread_info, thread_info, sizeof *thread_info);
+
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
+
+	if (thread_info != exception_thread_info)
+		memcpy(thread_info, exception_thread_info, sizeof *thread_info);
+
+	return 1;
+}
+
+static int kgdb_iabr_match(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+		return 0;
+	return 1;
+}
+
+static int kgdb_dabr_match(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+		return 0;
+	return 1;
+}
+
+#define PACK64(ptr, src) do { *(ptr++) = (src); } while (0)
+
+#define PACK32(ptr, src) do {          \
+	u32 *ptr32;                   \
+	ptr32 = (u32 *)ptr;           \
+	*(ptr32++) = (src);           \
+	ptr = (unsigned long *)ptr32; \
+	} while (0)
+
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned long *ptr = gdb_regs;
+	int reg;
+
+	memset(gdb_regs, 0, NUMREGBYTES);
+
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, current->thread.evr[reg]);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(long);
+#endif
+
+	PACK64(ptr, regs->nip);
+	PACK64(ptr, regs->msr);
+	PACK32(ptr, regs->ccr);
+	PACK64(ptr, regs->link);
+	PACK64(ptr, regs->ctr);
+	PACK32(ptr, regs->xer);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	struct pt_regs *regs = (struct pt_regs *)(p->thread.ksp +
+						  STACK_FRAME_OVERHEAD);
+	unsigned long *ptr = gdb_regs;
+	int reg;
+
+	memset(gdb_regs, 0, NUMREGBYTES);
+
+	/* Regs GPR0-2 */
+	for (reg = 0; reg < 3; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+	/* Regs GPR3-13 are caller saved, not in regs->gpr[] */
+	ptr += 11;
+
+	/* Regs GPR14-31 */
+	for (reg = 14; reg < 32; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, p->thread.evr[reg]);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(long);
+#endif
+
+	PACK64(ptr, regs->nip);
+	PACK64(ptr, regs->msr);
+	PACK32(ptr, regs->ccr);
+	PACK64(ptr, regs->link);
+	PACK64(ptr, regs->ctr);
+	PACK32(ptr, regs->xer);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+#define UNPACK64(dest, ptr) do { dest = *(ptr++); } while (0)
+
+#define UNPACK32(dest, ptr) do {       \
+	u32 *ptr32;                   \
+	ptr32 = (u32 *)ptr;           \
+	dest = *(ptr32++);            \
+	ptr = (unsigned long *)ptr32; \
+	} while (0)
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned long *ptr = gdb_regs;
+	int reg;
+#ifdef CONFIG_SPE
+	union {
+		u32 v32[2];
+		u64 v64;
+	} acc;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		UNPACK64(regs->gpr[reg], ptr);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		UNPACK64(current->thread.evr[reg], ptr);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(int);
+#endif
+
+	UNPACK64(regs->nip, ptr);
+	UNPACK64(regs->msr, ptr);
+	UNPACK32(regs->ccr, ptr);
+	UNPACK64(regs->link, ptr);
+	UNPACK64(regs->ctr, ptr);
+	UNPACK32(regs->xer, ptr);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+/*
+ * This function does PowerPC specific procesing for interfacing to gdb.
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *linux_regs)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long addr;
+
+	switch (remcom_in_buffer[0]) {
+		/*
+		 * sAA..AA   Step one instruction from AA..AA
+		 * This will return an error to gdb ..
+		 */
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->nip = addr;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		/* set the trace bit if we're stepping */
+		if (remcom_in_buffer[0] == 's') {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+			mtspr(SPRN_DBCR0,
+			      mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+			linux_regs->msr |= MSR_DE;
+#else
+			linux_regs->msr |= MSR_SE;
+#endif
+			kgdb_single_step = 1;
+			if (kgdb_contthread)
+				atomic_set(&kgdb_cpu_doing_single_step,
+					   raw_smp_processor_id());
+		}
+		return 0;
+	}
+
+	return -1;
+}
+
+/*
+ * Global data
+ */
+struct kgdb_arch arch_kgdb_ops = {
+	.gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08},
+};
+
+static int kgdb_not_implemented(struct pt_regs *regs)
+{
+	return 0;
+}
+
+static void *old__debugger_ipi;
+static void *old__debugger;
+static void *old__debugger_bpt;
+static void *old__debugger_sstep;
+static void *old__debugger_iabr_match;
+static void *old__debugger_dabr_match;
+static void *old__debugger_fault_handler;
+
+int kgdb_arch_init(void)
+{
+	old__debugger_ipi = __debugger_ipi;
+	old__debugger = __debugger;
+	old__debugger_bpt = __debugger_bpt;
+	old__debugger_sstep = __debugger_sstep;
+	old__debugger_iabr_match = __debugger_iabr_match;
+	old__debugger_dabr_match = __debugger_dabr_match;
+	old__debugger_fault_handler = __debugger_fault_handler;
+
+	__debugger_ipi = kgdb_call_nmi_hook;
+	__debugger = kgdb_debugger;
+	__debugger_bpt = kgdb_handle_breakpoint;
+	__debugger_sstep = kgdb_singlestep;
+	__debugger_iabr_match = kgdb_iabr_match;
+	__debugger_dabr_match = kgdb_dabr_match;
+	__debugger_fault_handler = kgdb_not_implemented;
+
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+	__debugger_ipi = old__debugger_ipi;
+	__debugger = old__debugger;
+	__debugger_bpt = old__debugger_bpt;
+	__debugger_sstep = old__debugger_sstep;
+	__debugger_iabr_match = old__debugger_iabr_match;
+	__debugger_dabr_match = old__debugger_dabr_match;
+	__debugger_fault_handler = old__debugger_fault_handler;
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 4efebe88e64..066e65c59b5 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -43,10 +43,6 @@
 
 #define DBG(fmt...)
 
-#if defined CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
 int boot_cpuid;
@@ -302,18 +298,6 @@ void __init setup_arch(char **cmdline_p)
 
 	xmon_setup();
 
-#if defined(CONFIG_KGDB)
-	if (ppc_md.kgdb_map_scc)
-		ppc_md.kgdb_map_scc();
-	set_debug_traps();
-	if (strstr(cmd_line, "gdb")) {
-		if (ppc_md.progress)
-			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
-		printk("kgdb breakpoint activated\n");
-		breakpoint();
-	}
-#endif
-
 	/*
 	 * Set cache line size based on type of cpu as a default.
 	 * Systems with OF can look in the properties on the cpu node(s)
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 00bd0166d07..31635446901 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -97,8 +97,6 @@ extern struct machdep_calls pmac_md;
 int sccdbg;
 #endif
 
-extern void zs_kgdb_hook(int tty_num);
-
 sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
 EXPORT_SYMBOL(sys_ctrler);
 
@@ -329,10 +327,6 @@ static void __init pmac_setup_arch(void)
 	l2cr_init();
 #endif /* CONFIG_PPC32 */
 
-#ifdef CONFIG_KGDB
-	zs_kgdb_hook(0);
-#endif
-
 	find_via_cuda();
 	find_via_pmu();
 	smu_init();
diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h
index b617dac8296..1399caf719a 100644
--- a/include/asm-powerpc/kgdb.h
+++ b/include/asm-powerpc/kgdb.h
@@ -1,57 +1,65 @@
 /*
- * kgdb.h: Defines and declarations for serial line source level
- *         remote debugging of the Linux kernel using gdb.
+ * include/asm-powerpc/kgdb.h
  *
+ * The PowerPC (32/64) specific defines / externs for KGDB.  Based on
+ * the previous 32bit and 64bit specific files, which had the following
+ * copyrights:
+ *
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC Mods (C) 2004 Tom Rini (trini@mvista.com)
+ * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com)
  * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
  *
+ *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Author: Tom Rini <trini@kernel.crashing.org>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
  */
 #ifdef __KERNEL__
-#ifndef _PPC_KGDB_H
-#define _PPC_KGDB_H
+#ifndef __POWERPC_KGDB_H__
+#define __POWERPC_KGDB_H__
 
 #ifndef __ASSEMBLY__
 
-/* Things specific to the gen550 backend. */
-struct uart_port;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_kgdb_map_scc(void);
-extern void gen550_init(int, struct uart_port *);
-
-/* Things specific to the pmac backend. */
-extern void zs_kgdb_hook(int tty_num);
-
-/* To init the kgdb engine. (called by serial hook)*/
-extern void set_debug_traps(void);
-
-/* To enter the debugger explicitly. */
-extern void breakpoint(void);
-
-/* For taking exceptions
- * these are defined in traps.c
- */
-extern int (*debugger)(struct pt_regs *regs);
-extern int (*debugger_bpt)(struct pt_regs *regs);
-extern int (*debugger_sstep)(struct pt_regs *regs);
-extern int (*debugger_iabr_match)(struct pt_regs *regs);
-extern int (*debugger_dabr_match)(struct pt_regs *regs);
-extern void (*debugger_fault_handler)(struct pt_regs *regs);
-
-/* What we bring to the party */
-int kgdb_bpt(struct pt_regs *regs);
-int kgdb_sstep(struct pt_regs *regs);
-void kgdb(struct pt_regs *regs);
-int kgdb_iabr_match(struct pt_regs *regs);
-int kgdb_dabr_match(struct pt_regs *regs);
+#define BREAK_INSTR_SIZE	4
+#define BUFMAX			((NUMREGBYTES * 2) + 512)
+#define OUTBUFMAX		((NUMREGBYTES * 2) + 512)
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".long 0x7d821008"); /* twge r2, r2 */
+}
+#define CACHE_FLUSH_IS_SAFE	1
 
+/* The number bytes of registers we have to save depends on a few
+ * things.  For 64bit we default to not including vector registers and
+ * vector state registers. */
+#ifdef CONFIG_PPC64
 /*
- * external low-level support routines (ie macserial.c)
+ * 64 bit (8 byte) registers:
+ *   32 gpr, 32 fpr, nip, msr, link, ctr
+ * 32 bit (4 byte) registers:
+ *   ccr, xer, fpscr
  */
-extern void kgdb_interruptible(int); /* control interrupts from serial */
-extern void putDebugChar(char);   /* write a single character      */
-extern char getDebugChar(void);   /* read and return a single char */
-
+#define NUMREGBYTES		((68 * 8) + (3 * 4))
+#define NUMCRITREGBYTES		184
+#else /* CONFIG_PPC32 */
+/* On non-E500 family PPC32 we determine the size by picking the last
+ * register we need, but on E500 we skip sections so we list what we
+ * need to store, and add it up. */
+#ifndef CONFIG_E500
+#define MAXREG			(PT_FPSCR+1)
+#else
+/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/
+#define MAXREG                 ((32*2)+6+2+1)
+#endif
+#define NUMREGBYTES		(MAXREG * sizeof(int))
+/* CR/LR, R1, R2, R13-R31 inclusive. */
+#define NUMCRITREGBYTES		(23 * sizeof(int))
+#endif /* 32/64 */
 #endif /* !(__ASSEMBLY__) */
-#endif /* !(_PPC_KGDB_H) */
+#endif /* !__POWERPC_KGDB_H__ */
 #endif /* __KERNEL__ */
-- 
cgit v1.2.3


From 8e21d04c077c50284bdad10fda8f8cea674458e1 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 23 Jul 2008 11:30:16 -0500
Subject: kgdb: kgdboc console poll hooks for cpm uart

Add in console polling hooks for the cpm uart for use with kgdb and
kgdboc.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: galak@kernel.crashing.org
---
 drivers/serial/cpm_uart/cpm_uart_core.c | 95 ++++++++++++++++++++++++++++++++-
 1 file changed, 94 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 93e407ee08b..1ff80de177d 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -201,6 +201,10 @@ static void cpm_uart_int_tx(struct uart_port *port)
 	cpm_uart_tx_pump(port);
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int serial_polled;
+#endif
+
 /*
  * Receive characters
  */
@@ -222,6 +226,12 @@ static void cpm_uart_int_rx(struct uart_port *port)
 	 */
 	bdp = pinfo->rx_cur;
 	for (;;) {
+#ifdef CONFIG_CONSOLE_POLL
+		if (unlikely(serial_polled)) {
+			serial_polled = 0;
+			return;
+		}
+#endif
 		/* get status */
 		status = in_be16(&bdp->cbd_sc);
 		/* If this one is empty, return happy */
@@ -253,7 +263,12 @@ static void cpm_uart_int_rx(struct uart_port *port)
 				goto handle_error;
 			if (uart_handle_sysrq_char(port, ch))
 				continue;
-
+#ifdef CONFIG_CONSOLE_POLL
+			if (unlikely(serial_polled)) {
+				serial_polled = 0;
+				return;
+			}
+#endif
 		      error_return:
 			tty_insert_flip_char(tty, ch, flg);
 
@@ -865,6 +880,80 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
 		cpm_uart_request_port(port);
 	}
 }
+
+#ifdef CONFIG_CONSOLE_POLL
+/* Serial polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+#define GDB_BUF_SIZE	512	/* power of 2, please */
+
+static char poll_buf[GDB_BUF_SIZE];
+static char *pollp;
+static int poll_chars;
+
+static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo)
+{
+	u_char		c, *cp;
+	volatile cbd_t	*bdp;
+	int		i;
+
+	/* Get the address of the host memory buffer.
+	 */
+	bdp = pinfo->rx_cur;
+	while (bdp->cbd_sc & BD_SC_EMPTY)
+		;
+
+	/* If the buffer address is in the CPM DPRAM, don't
+	 * convert it.
+	 */
+	cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
+
+	if (obuf) {
+		i = c = bdp->cbd_datlen;
+		while (i-- > 0)
+			*obuf++ = *cp++;
+	} else
+		c = *cp;
+	bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
+	bdp->cbd_sc |= BD_SC_EMPTY;
+
+	if (bdp->cbd_sc & BD_SC_WRAP)
+		bdp = pinfo->rx_bd_base;
+	else
+		bdp++;
+	pinfo->rx_cur = (cbd_t *)bdp;
+
+	return (int)c;
+}
+
+static int cpm_get_poll_char(struct uart_port *port)
+{
+	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+	if (!serial_polled) {
+		serial_polled = 1;
+		poll_chars = 0;
+	}
+	if (poll_chars <= 0) {
+		poll_chars = poll_wait_key(poll_buf, pinfo);
+		pollp = poll_buf;
+	}
+	poll_chars--;
+	return *pollp++;
+}
+
+static void cpm_put_poll_char(struct uart_port *port,
+			 unsigned char c)
+{
+	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+	static char ch[2];
+
+	ch[0] = (char)c;
+	cpm_uart_early_write(pinfo->port.line, ch, 1);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
 static struct uart_ops cpm_uart_pops = {
 	.tx_empty	= cpm_uart_tx_empty,
 	.set_mctrl	= cpm_uart_set_mctrl,
@@ -882,6 +971,10 @@ static struct uart_ops cpm_uart_pops = {
 	.request_port	= cpm_uart_request_port,
 	.config_port	= cpm_uart_config_port,
 	.verify_port	= cpm_uart_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char = cpm_get_poll_char,
+	.poll_put_char = cpm_put_poll_char,
+#endif
 };
 
 struct uart_cpm_port cpm_uart_ports[UART_NR];
-- 
cgit v1.2.3


From 3b216c9ed347924efb5e7a66b3257c40a5596d30 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 23 Jul 2008 11:30:16 -0500
Subject: kgdb: kgdboc console poll hooks for mpsc uart

Add in console polling hooks for the mpsc uart for use with kgdb and
kgdboc.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 drivers/serial/mpsc.c | 148 +++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 147 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index c9f53e71f25..61d3ade5286 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -921,6 +921,10 @@ static int mpsc_make_ready(struct mpsc_port_info *pi)
 	return 0;
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int serial_polled;
+#endif
+
 /*
  ******************************************************************************
  *
@@ -956,7 +960,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
 	while (!((cmdstat = be32_to_cpu(rxre->cmdstat))
 				& SDMA_DESC_CMDSTAT_O)) {
 		bytes_in = be16_to_cpu(rxre->bytecnt);
-
+#ifdef CONFIG_CONSOLE_POLL
+		if (unlikely(serial_polled)) {
+			serial_polled = 0;
+			return 0;
+		}
+#endif
 		/* Following use of tty struct directly is deprecated */
 		if (unlikely(tty_buffer_request_room(tty, bytes_in)
 					< bytes_in)) {
@@ -1017,6 +1026,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi)
 		if (uart_handle_sysrq_char(&pi->port, *bp)) {
 			bp++;
 			bytes_in--;
+#ifdef CONFIG_CONSOLE_POLL
+			if (unlikely(serial_polled)) {
+				serial_polled = 0;
+				return 0;
+			}
+#endif
 			goto next_frame;
 		}
 
@@ -1519,6 +1534,133 @@ static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
 
 	return rc;
 }
+#ifdef CONFIG_CONSOLE_POLL
+/* Serial polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static char poll_buf[2048];
+static int poll_ptr;
+static int poll_cnt;
+static void mpsc_put_poll_char(struct uart_port *port,
+							   unsigned char c);
+
+static int mpsc_get_poll_char(struct uart_port *port)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	struct mpsc_rx_desc *rxre;
+	u32	cmdstat, bytes_in, i;
+	u8	*bp;
+
+	if (!serial_polled)
+		serial_polled = 1;
+
+	pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
+
+	if (poll_cnt) {
+		poll_cnt--;
+		return poll_buf[poll_ptr++];
+	}
+	poll_ptr = 0;
+	poll_cnt = 0;
+
+	while (poll_cnt == 0) {
+		rxre = (struct mpsc_rx_desc *)(pi->rxr +
+		       (pi->rxr_posn*MPSC_RXRE_SIZE));
+		dma_cache_sync(pi->port.dev, (void *)rxre,
+			       MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+			invalidate_dcache_range((ulong)rxre,
+			(ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+		/*
+		 * Loop through Rx descriptors handling ones that have
+		 * been completed.
+		 */
+		while (poll_cnt == 0 &&
+		       !((cmdstat = be32_to_cpu(rxre->cmdstat)) &
+			 SDMA_DESC_CMDSTAT_O)){
+			bytes_in = be16_to_cpu(rxre->bytecnt);
+			bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
+			dma_cache_sync(pi->port.dev, (void *) bp,
+				       MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+				invalidate_dcache_range((ulong)bp,
+					(ulong)bp + MPSC_RXBE_SIZE);
+#endif
+			if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
+			 SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
+				!(cmdstat & pi->port.ignore_status_mask)) {
+				poll_buf[poll_cnt] = *bp;
+				poll_cnt++;
+			} else {
+				for (i = 0; i < bytes_in; i++) {
+					poll_buf[poll_cnt] = *bp++;
+					poll_cnt++;
+				}
+				pi->port.icount.rx += bytes_in;
+			}
+			rxre->bytecnt = cpu_to_be16(0);
+			wmb();
+			rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
+						    SDMA_DESC_CMDSTAT_EI |
+						    SDMA_DESC_CMDSTAT_F |
+						    SDMA_DESC_CMDSTAT_L);
+			wmb();
+			dma_cache_sync(pi->port.dev, (void *)rxre,
+				       MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+				flush_dcache_range((ulong)rxre,
+					   (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+
+			/* Advance to next descriptor */
+			pi->rxr_posn = (pi->rxr_posn + 1) &
+				(MPSC_RXR_ENTRIES - 1);
+			rxre = (struct mpsc_rx_desc *)(pi->rxr +
+				       (pi->rxr_posn * MPSC_RXRE_SIZE));
+			dma_cache_sync(pi->port.dev, (void *)rxre,
+				       MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+				invalidate_dcache_range((ulong)rxre,
+						(ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+		}
+
+		/* Restart rx engine, if its stopped */
+		if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
+			mpsc_start_rx(pi);
+	}
+	if (poll_cnt) {
+		poll_cnt--;
+		return poll_buf[poll_ptr++];
+	}
+
+	return 0;
+}
+
+
+static void mpsc_put_poll_char(struct uart_port *port,
+			 unsigned char c)
+{
+	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+	u32 data;
+
+	data = readl(pi->mpsc_base + MPSC_MPCR);
+	writeb(c, pi->mpsc_base + MPSC_CHR_1);
+	mb();
+	data = readl(pi->mpsc_base + MPSC_CHR_2);
+	data |= MPSC_CHR_2_TTCS;
+	writel(data, pi->mpsc_base + MPSC_CHR_2);
+	mb();
+
+	while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS);
+}
+#endif
 
 static struct uart_ops mpsc_pops = {
 	.tx_empty	= mpsc_tx_empty,
@@ -1537,6 +1679,10 @@ static struct uart_ops mpsc_pops = {
 	.request_port	= mpsc_request_port,
 	.config_port	= mpsc_config_port,
 	.verify_port	= mpsc_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char = mpsc_get_poll_char,
+	.poll_put_char = mpsc_put_poll_char,
+#endif
 };
 
 /*
-- 
cgit v1.2.3


From 2db873211ba47ef704c301f9ecf4a33413a0b649 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <Uwe.Kleine-Koenig@digi.com>
Date: Wed, 23 Jul 2008 14:42:25 +0200
Subject: set_irq_wake: fix return code and wake status tracking
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Since 15a647eba94c3da27ccc666bea72e7cca06b2d19 set_irq_wake returned -ENXIO
if another device had it already enabled.  Zero is the right value to
return in this case.  Moreover the change to desc->status was not reverted
if desc->chip->set_wake returned an error.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/irq/manage.c | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)

diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 77a51be3601..3cfc0fefb5e 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -217,6 +217,17 @@ void enable_irq(unsigned int irq)
 }
 EXPORT_SYMBOL(enable_irq);
 
+int set_irq_wake_real(unsigned int irq, unsigned int on)
+{
+	struct irq_desc *desc = irq_desc + irq;
+	int ret = -ENXIO;
+
+	if (desc->chip->set_wake)
+		ret = desc->chip->set_wake(irq, on);
+
+	return ret;
+}
+
 /**
  *	set_irq_wake - control irq power management wakeup
  *	@irq:	interrupt to control
@@ -233,30 +244,34 @@ int set_irq_wake(unsigned int irq, unsigned int on)
 {
 	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
-	int ret = -ENXIO;
-	int (*set_wake)(unsigned, unsigned) = desc->chip->set_wake;
+	int ret = 0;
 
 	/* wakeup-capable irqs can be shared between drivers that
 	 * don't need to have the same sleep mode behaviors.
 	 */
 	spin_lock_irqsave(&desc->lock, flags);
 	if (on) {
-		if (desc->wake_depth++ == 0)
-			desc->status |= IRQ_WAKEUP;
-		else
-			set_wake = NULL;
+		if (desc->wake_depth++ == 0) {
+			ret = set_irq_wake_real(irq, on);
+			if (ret)
+				desc->wake_depth = 0;
+			else
+				desc->status |= IRQ_WAKEUP;
+		}
 	} else {
 		if (desc->wake_depth == 0) {
 			printk(KERN_WARNING "Unbalanced IRQ %d "
 					"wake disable\n", irq);
 			WARN_ON(1);
-		} else if (--desc->wake_depth == 0)
-			desc->status &= ~IRQ_WAKEUP;
-		else
-			set_wake = NULL;
+		} else if (--desc->wake_depth == 0) {
+			ret = set_irq_wake_real(irq, on);
+			if (ret)
+				desc->wake_depth = 1;
+			else
+				desc->status &= ~IRQ_WAKEUP;
+		}
 	}
-	if (set_wake)
-		ret = desc->chip->set_wake(irq, on);
+
 	spin_unlock_irqrestore(&desc->lock, flags);
 	return ret;
 }
-- 
cgit v1.2.3


From 4d8f54d9e4323baae8c8ca753db91563f4b34ddb Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Wed, 23 Jul 2008 22:45:20 +0800
Subject: drivers/char/nvram.c: Removed duplicated include

Removed duplicated include file <linux/smp_lock.h> in
drivers/char/nvram.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/nvram.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index a22662b6a1a..39f6357e3b5 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -107,7 +107,6 @@
 #include <linux/init.h>
 #include <linux/proc_fs.h>
 #include <linux/spinlock.h>
-#include <linux/smp_lock.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
-- 
cgit v1.2.3


From 7c1fed03b9fa32d4323d5caa6a9c7dcdd7eba767 Mon Sep 17 00:00:00 2001
From: Jeff Dike <jdike@addtoit.com>
Date: Wed, 23 Jul 2008 11:46:50 -0400
Subject: UML - Fix boot crash

My copying of linux/init.h didn't go far enough.  The definition of
__used singled out gcc minor version 3, but didn't care what the major
version was.  This broke when unit-at-a-time was added and gcc started
throwing out initcalls.

This results in an early boot crash when ptrace tries to initialize a
process with an empty, uninitialized register set.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/include/init.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/um/include/init.h b/arch/um/include/init.h
index b00a95741d4..37dd097c16c 100644
--- a/arch/um/include/init.h
+++ b/arch/um/include/init.h
@@ -45,12 +45,20 @@ typedef void (*exitcall_t)(void);
 # define __section(S) __attribute__ ((__section__(#S)))
 #endif
 
+#if __GNUC__ == 3
+
 #if __GNUC_MINOR__ >= 3
 # define __used			__attribute__((__used__))
 #else
 # define __used			__attribute__((__unused__))
 #endif
 
+#else
+#if __GNUC__ == 4
+# define __used			__attribute__((__used__))
+#endif
+#endif
+
 #else
 #include <linux/compiler.h>
 #endif
-- 
cgit v1.2.3


From 7b8797acd499d59ed03c7a5b98d82cdf054fd04d Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:48 +0200
Subject: ide-pmac: store pmif instead of hwif in ->driver_data (take 2)

* Pass pmif instead of hwif to pmac_ide_do_{suspend,resume}().

* Store pmif instead of hwif in ->driver_data.

* Use dev_get_drvdata() instead of ->hwif_data to obtain pmif.

v2:
* Build fixes from Stephen Rothwell.

There should be no functional changes caused by this patch.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ppc/pmac.c | 97 +++++++++++++++++++++++++++++---------------------
 1 file changed, 57 insertions(+), 40 deletions(-)

diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 93fb9067c04..9244b58e054 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -424,7 +424,9 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
 static void
 pmac_ide_selectproc(ide_drive_t *drive)
 {
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 
 	if (pmif == NULL)
 		return;
@@ -444,7 +446,9 @@ pmac_ide_selectproc(ide_drive_t *drive)
 static void
 pmac_ide_kauai_selectproc(ide_drive_t *drive)
 {
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 
 	if (pmif == NULL)
 		return;
@@ -465,7 +469,9 @@ pmac_ide_kauai_selectproc(ide_drive_t *drive)
 static void
 pmac_ide_do_update_timings(ide_drive_t *drive)
 {
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 
 	if (pmif == NULL)
 		return;
@@ -493,11 +499,13 @@ static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
 static void
 pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio);
 	u32 *timings, t;
 	unsigned accessTicks, recTicks;
 	unsigned accessTime, recTime;
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
 	unsigned int cycle_time;
 
 	if (pmif == NULL)
@@ -778,9 +786,11 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
 
 static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	int unit = (drive->select.b.unit & 0x01);
 	int ret = 0;
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
 	u32 *timings, *timings2, tl[2];
 
 	timings = &pmif->timings[unit];
@@ -852,11 +862,8 @@ sanitize_timings(pmac_ide_hwif_t *pmif)
 /* Suspend call back, should be called after the child devices
  * have actually been suspended
  */
-static int
-pmac_ide_do_suspend(ide_hwif_t *hwif)
+static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif)
 {
-	pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
-	
 	/* We clear the timings */
 	pmif->timings[0] = 0;
 	pmif->timings[1] = 0;
@@ -884,11 +891,8 @@ pmac_ide_do_suspend(ide_hwif_t *hwif)
 /* Resume call back, should be called before the child devices
  * are resumed
  */
-static int
-pmac_ide_do_resume(ide_hwif_t *hwif)
+static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif)
 {
-	pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
-	
 	/* Hard reset & re-enable controller (do we really need to reset ? -BenH) */
 	if (!pmif->mediabay) {
 		ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1);
@@ -916,7 +920,8 @@ pmac_ide_do_resume(ide_hwif_t *hwif)
 
 static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
 {
-	pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif);
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	struct device_node *np = pmif->node;
 	const char *cable = of_get_property(np, "cable-type", NULL);
 
@@ -1058,7 +1063,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
 	default_hwif_mmiops(hwif);
        	hwif->OUTBSYNC = pmac_outbsync;
 
-	hwif->hwif_data = pmif;
 	ide_init_port_hw(hwif, hw);
 
 	printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
@@ -1164,7 +1168,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	} else
 		pmif->dma_regs = NULL;
 #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-	dev_set_drvdata(&mdev->ofdev.dev, hwif);
+	dev_set_drvdata(&mdev->ofdev.dev, pmif);
 
 	memset(&hw, 0, sizeof(hw));
 	pmac_ide_init_ports(&hw, pmif->regbase);
@@ -1195,12 +1199,13 @@ out_free_pmif:
 static int
 pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
 {
-	ide_hwif_t	*hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
-	int		rc = 0;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
+	int rc = 0;
 
 	if (mesg.event != mdev->ofdev.dev.power.power_state.event
 			&& (mesg.event & PM_EVENT_SLEEP)) {
-		rc = pmac_ide_do_suspend(hwif);
+		rc = pmac_ide_do_suspend(pmif);
 		if (rc == 0)
 			mdev->ofdev.dev.power.power_state = mesg;
 	}
@@ -1211,11 +1216,12 @@ pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
 static int
 pmac_ide_macio_resume(struct macio_dev *mdev)
 {
-	ide_hwif_t	*hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
-	int		rc = 0;
-	
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
+	int rc = 0;
+
 	if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) {
-		rc = pmac_ide_do_resume(hwif);
+		rc = pmac_ide_do_resume(pmif);
 		if (rc == 0)
 			mdev->ofdev.dev.power.power_state = PMSG_ON;
 	}
@@ -1284,7 +1290,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	pmif->kauai_fcr = base;
 	pmif->irq = pdev->irq;
 
-	pci_set_drvdata(pdev, hwif);
+	pci_set_drvdata(pdev, pmif);
 
 	memset(&hw, 0, sizeof(hw));
 	pmac_ide_init_ports(&hw, pmif->regbase);
@@ -1310,12 +1316,12 @@ out_free_pmif:
 static int
 pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
-	ide_hwif_t	*hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
-	int		rc = 0;
-	
+	pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev);
+	int rc = 0;
+
 	if (mesg.event != pdev->dev.power.power_state.event
 			&& (mesg.event & PM_EVENT_SLEEP)) {
-		rc = pmac_ide_do_suspend(hwif);
+		rc = pmac_ide_do_suspend(pmif);
 		if (rc == 0)
 			pdev->dev.power.power_state = mesg;
 	}
@@ -1326,11 +1332,11 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 static int
 pmac_ide_pci_resume(struct pci_dev *pdev)
 {
-	ide_hwif_t	*hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
-	int		rc = 0;
-	
+	pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev);
+	int rc = 0;
+
 	if (pdev->dev.power.power_state.event != PM_EVENT_ON) {
-		rc = pmac_ide_do_resume(hwif);
+		rc = pmac_ide_do_resume(pmif);
 		if (rc == 0)
 			pdev->dev.power.power_state = PMSG_ON;
 	}
@@ -1421,10 +1427,11 @@ out:
 static int
 pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq)
 {
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	struct dbdma_cmd *table;
 	int i, count = 0;
-	ide_hwif_t *hwif = HWIF(drive);
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
 	volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
 	struct scatterlist *sg;
 	int wr = (rq_data_dir(rq) == WRITE);
@@ -1520,7 +1527,8 @@ static int
 pmac_ide_dma_setup(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = HWIF(drive);
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	struct request *rq = HWGROUP(drive)->rq;
 	u8 unit = (drive->select.b.unit & 0x01);
 	u8 ata4;
@@ -1560,7 +1568,9 @@ pmac_ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
 static void
 pmac_ide_dma_start(ide_drive_t *drive)
 {
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	volatile struct dbdma_regs __iomem *dma;
 
 	dma = pmif->dma_regs;
@@ -1576,7 +1586,9 @@ pmac_ide_dma_start(ide_drive_t *drive)
 static int
 pmac_ide_dma_end (ide_drive_t *drive)
 {
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	volatile struct dbdma_regs __iomem *dma;
 	u32 dstat;
 	
@@ -1604,7 +1616,9 @@ pmac_ide_dma_end (ide_drive_t *drive)
 static int
 pmac_ide_dma_test_irq (ide_drive_t *drive)
 {
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	volatile struct dbdma_regs __iomem *dma;
 	unsigned long status, timeout;
 
@@ -1664,7 +1678,9 @@ static void pmac_ide_dma_host_set(ide_drive_t *drive, int on)
 static void
 pmac_ide_dma_lost_irq (ide_drive_t *drive)
 {
-	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	volatile struct dbdma_regs __iomem *dma;
 	unsigned long status;
 
@@ -1694,7 +1710,8 @@ static const struct ide_dma_ops pmac_dma_ops = {
 static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
 				       const struct ide_port_info *d)
 {
-	pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 
 	/* We won't need pci_dev if we switch to generic consistent
-- 
cgit v1.2.3


From 07eb106f3a69400b628b7b6ca3464a1a8f847fa3 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:49 +0200
Subject: ide-pmac: add ->init_dev method (take 4)

v2/3:
* Build fixes from Stephen Rothwell.

v4:
* Fix ->noprobe setting. (From Benjamin Herrenschmidt)

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ppc/pmac.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 9244b58e054..4530b49e7dd 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -941,7 +941,25 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
 	return ATA_CBL_PATA40;
 }
 
+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	pmac_ide_hwif_t *pmif =
+		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
+
+	if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+		if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) {
+			drive->noprobe = 0;
+			return;
+		}
+#endif
+		drive->noprobe = 1;
+	}
+}
+
 static const struct ide_port_ops pmac_ide_ata6_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_kauai_selectproc,
@@ -949,6 +967,7 @@ static const struct ide_port_ops pmac_ide_ata6_port_ops = {
 };
 
 static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_selectproc,
@@ -956,6 +975,7 @@ static const struct ide_port_ops pmac_ide_ata4_port_ops = {
 };
 
 static const struct ide_port_ops pmac_ide_port_ops = {
+	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
 	.set_dma_mode		= pmac_ide_set_dma_mode,
 	.selectproc		= pmac_ide_selectproc,
@@ -1069,17 +1089,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
 	       hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
 	       pmif->mediabay ? " (mediabay)" : "", hwif->irq);
 
-	if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
-		if (check_media_bay_by_base(pmif->regbase, MB_CD)) {
-#else
-		if (1) {
-#endif
-			hwif->drives[0].noprobe = 1;
-			hwif->drives[1].noprobe = 1;
-		}
-	}
-
 	idx[0] = hwif->index;
 
 	ide_device_add(idx, &d);
-- 
cgit v1.2.3


From b36ba53218e164e49623e36fa3a2fec9f08cf70a Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:49 +0200
Subject: ide-pmac: move ide_find_port() call to pmac_ide_setup_device() (take
 2)

Move ide_find_port() call to pmac_ide_setup_device().

While at it:

- fix return value (s/-ENODEV/-ENOENT/)

- add DRV_NAME define and use it to set name field of pmac_port_info

- use ide_find_port_slot() instead of ide_find_port()

- remove superfluous error message (ide_find_port_slot() takes care of it)

- drop IDE interface number from driver banner message (but include bus type)

v2:
* Build fix (thanks to Stephen Rothwell for noticing the issue).

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ppc/pmac.c | 42 ++++++++++++++++--------------------------
 1 file changed, 16 insertions(+), 26 deletions(-)

diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 4530b49e7dd..4e2944ee76d 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -48,6 +48,8 @@
 #include <asm/mediabay.h>
 #endif
 
+#define DRV_NAME "ide-pmac"
+
 #undef IDE_PMAC_DEBUG
 
 #define DMA_WAIT_TIMEOUT	50
@@ -984,6 +986,7 @@ static const struct ide_port_ops pmac_ide_port_ops = {
 static const struct ide_dma_ops pmac_dma_ops;
 
 static const struct ide_port_info pmac_port_info = {
+	.name			= DRV_NAME,
 	.init_dma		= pmac_ide_init_dma,
 	.chipset		= ide_pmac,
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
@@ -1002,11 +1005,11 @@ static const struct ide_port_info pmac_port_info = {
  * Setup, register & probe an IDE channel driven by this driver, this is
  * called by one of the 2 probe functions (macio or PCI).
  */
-static int __devinit
-pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
+static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 {
 	struct device_node *np = pmif->node;
 	const int *bidp;
+	ide_hwif_t *hwif;
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	struct ide_port_info d = pmac_port_info;
 
@@ -1079,16 +1082,21 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
 		msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
 	}
 
+	printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
+			 "bus ID %d%s, irq %d\n", model_name[pmif->kind],
+			 pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
+			 pmif->mediabay ? " (mediabay)" : "", hw->irq);
+
+	hwif = ide_find_port_slot(&d);
+	if (hwif == NULL)
+		return -ENOENT;
+
 	/* Setup MMIO ops */
 	default_hwif_mmiops(hwif);
        	hwif->OUTBSYNC = pmac_outbsync;
 
 	ide_init_port_hw(hwif, hw);
 
-	printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
-	       hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
-	       pmif->mediabay ? " (mediabay)" : "", hwif->irq);
-
 	idx[0] = hwif->index;
 
 	ide_device_add(idx, &d);
@@ -1114,7 +1122,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 {
 	void __iomem *base;
 	unsigned long regbase;
-	ide_hwif_t *hwif;
 	pmac_ide_hwif_t *pmif;
 	int irq, rc;
 	hw_regs_t hw;
@@ -1123,14 +1130,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	if (pmif == NULL)
 		return -ENOMEM;
 
-	hwif = ide_find_port();
-	if (hwif == NULL) {
-		printk(KERN_ERR "ide-pmac: MacIO interface attach with no slot\n");
-		printk(KERN_ERR "          %s\n", mdev->ofdev.node->full_name);
-		rc = -ENODEV;
-		goto out_free_pmif;
-	}
-
 	if (macio_resource_count(mdev) == 0) {
 		printk(KERN_WARNING "ide-pmac: no address for %s\n",
 				    mdev->ofdev.node->full_name);
@@ -1185,7 +1184,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	hw.dev = &mdev->bus->pdev->dev;
 	hw.parent = &mdev->ofdev.dev;
 
-	rc = pmac_ide_setup_device(pmif, hwif, &hw);
+	rc = pmac_ide_setup_device(pmif, &hw);
 	if (rc != 0) {
 		/* The inteface is released to the common IDE layer */
 		dev_set_drvdata(&mdev->ofdev.dev, NULL);
@@ -1244,7 +1243,6 @@ pmac_ide_macio_resume(struct macio_dev *mdev)
 static int __devinit
 pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	ide_hwif_t *hwif;
 	struct device_node *np;
 	pmac_ide_hwif_t *pmif;
 	void __iomem *base;
@@ -1262,14 +1260,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (pmif == NULL)
 		return -ENOMEM;
 
-	hwif = ide_find_port();
-	if (hwif == NULL) {
-		printk(KERN_ERR "ide-pmac: PCI interface attach with no slot\n");
-		printk(KERN_ERR "          %s\n", np->full_name);
-		rc = -ENODEV;
-		goto out_free_pmif;
-	}
-
 	if (pci_enable_device(pdev)) {
 		printk(KERN_WARNING "ide-pmac: Can't enable PCI device for "
 				    "%s\n", np->full_name);
@@ -1306,7 +1296,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	hw.irq = pdev->irq;
 	hw.dev = &pdev->dev;
 
-	rc = pmac_ide_setup_device(pmif, hwif, &hw);
+	rc = pmac_ide_setup_device(pmif, &hw);
 	if (rc != 0) {
 		/* The inteface is released to the common IDE layer */
 		pci_set_drvdata(pdev, NULL);
-- 
cgit v1.2.3


From 51d87ed0aab98999bebaf891b99730e15502a592 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:49 +0200
Subject: ide: move ide_pci_setup_ports() call out from
 do_ide_setup_pci_device()

* Move ide_pci_setup_ports() call out from do_ide_setup_pci_device()
  to ide_setup_pci_device[s]().

* Drop no longer needed idx argument from do_ide_setup_pci_device().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/setup-pci.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 65fc08b6b6d..7ae6ae45331 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -480,7 +480,7 @@ EXPORT_SYMBOL_GPL(ide_pci_setup_ports);
  */
 static int do_ide_setup_pci_device(struct pci_dev *dev,
 				   const struct ide_port_info *d,
-				   u8 *idx, u8 noisy)
+				   u8 noisy)
 {
 	int tried_config = 0;
 	int pciirq, ret;
@@ -529,9 +529,7 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 				d->name, pciirq);
 	}
 
-	/* FIXME: silent failure can happen */
-
-	ide_pci_setup_ports(dev, d, pciirq, idx);
+	ret = pciirq;
 out:
 	return ret;
 }
@@ -541,10 +539,14 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	int ret;
 
-	ret = do_ide_setup_pci_device(dev, d, &idx[0], 1);
+	ret = do_ide_setup_pci_device(dev, d, 1);
+
+	if (ret >= 0) {
+		/* FIXME: silent failure can happen */
+		ide_pci_setup_ports(dev, d, ret, &idx[0]);
 
-	if (ret >= 0)
 		ide_device_add(idx, d);
+	}
 
 	return ret;
 }
@@ -558,13 +560,17 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	for (i = 0; i < 2; i++) {
-		ret = do_ide_setup_pci_device(pdev[i], d, &idx[i*2], !i);
+		ret = do_ide_setup_pci_device(pdev[i], d, !i);
+
 		/*
 		 * FIXME: Mom, mom, they stole me the helper function to undo
 		 * do_ide_setup_pci_device() on the first device!
 		 */
 		if (ret < 0)
 			goto out;
+
+		/* FIXME: silent failure can happen */
+		ide_pci_setup_ports(pdev[i], d, ret, &idx[i*2]);
 	}
 
 	ide_device_add(idx, d);
-- 
cgit v1.2.3


From c97c6aca75fd5f718056fde7cff798b8cbdb07c0 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:50 +0200
Subject: ide: pass hw_regs_t-s to ide_device_add[_all]() (take 3)

* Add 'hw_regs_t **hws' argument to ide_device_add[_all]() and convert
  host drivers + ide_legacy_init_one() + ide_setup_pci_device[s]() to use
  it instead of calling ide_init_port_hw() directly.

  [ However if host has > 1 port we must still set hwif->chipset to hint
    consecutive ide_find_port() call that the previous slot is occupied. ]

* Unexport ide_init_port_hw().

v2:
* Use defines instead of hard-coded values in buddha.c, gayle.c and q40ide.c.
  (Suggested by Geert Uytterhoeven)

* Better patch description.

v3:
* Fix build problem in ide-cs.c. (Noticed by Stephen Rothwell)

There should be no functional changes caused by this patch.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/icside.c          | 13 ++++++-------
 drivers/ide/arm/ide_arm.c         |  5 ++---
 drivers/ide/arm/palm_bk3710.c     |  6 ++----
 drivers/ide/arm/rapide.c          |  5 ++---
 drivers/ide/h8300/ide-h8300.c     |  5 ++---
 drivers/ide/ide-generic.c         | 23 ++++++++++++-----------
 drivers/ide/ide-pnp.c             |  6 ++----
 drivers/ide/ide-probe.c           | 29 ++++++++++++++++++-----------
 drivers/ide/ide.c                 |  1 -
 drivers/ide/legacy/buddha.c       | 16 +++++++++-------
 drivers/ide/legacy/falconide.c    |  6 ++----
 drivers/ide/legacy/gayle.c        | 13 ++++++-------
 drivers/ide/legacy/ide-4drives.c  | 10 ++++++----
 drivers/ide/legacy/ide-cs.c       | 10 +++-------
 drivers/ide/legacy/ide_platform.c |  9 +++------
 drivers/ide/legacy/macide.c       |  6 ++----
 drivers/ide/legacy/q40ide.c       | 14 ++++++--------
 drivers/ide/mips/au1xxx-ide.c     |  6 ++----
 drivers/ide/mips/swarm.c          |  6 ++----
 drivers/ide/pci/cmd640.c          | 10 ++++++----
 drivers/ide/pci/cs5520.c          |  5 +++--
 drivers/ide/pci/delkin_cb.c       |  6 ++----
 drivers/ide/pci/scc_pata.c        |  5 ++---
 drivers/ide/pci/sgiioc4.c         |  6 ++----
 drivers/ide/ppc/pmac.c            |  5 ++---
 drivers/ide/setup-pci.c           | 38 +++++++++++++++++++++++---------------
 include/linux/ide.h               |  7 ++++---
 27 files changed, 131 insertions(+), 140 deletions(-)

diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 52f58c88578..850fe9342a1 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -442,8 +442,8 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 {
 	ide_hwif_t *hwif;
 	void __iomem *base;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-	hw_regs_t hw;
 
 	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
 	if (!base)
@@ -467,7 +467,6 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 	if (!hwif)
 		return -ENODEV;
 
-	ide_init_port_hw(hwif, &hw);
 	default_hwif_mmiops(hwif);
 
 	state->hwif[0] = hwif;
@@ -476,7 +475,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx, NULL);
+	ide_device_add(idx, NULL, hws);
 
 	return 0;
 }
@@ -497,9 +496,9 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	void __iomem *ioc_base, *easi_base;
 	unsigned int sel = 0;
 	int ret;
+	hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	struct ide_port_info d = icside_v6_port_info;
-	hw_regs_t hw[2];
 
 	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
 	if (!ioc_base) {
@@ -545,16 +544,16 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	if (hwif == NULL)
 		return -ENODEV;
 
-	ide_init_port_hw(hwif, &hw[0]);
+	hwif->chipset = ide_acorn;
 	default_hwif_mmiops(hwif);
 
 	idx[0] = hwif->index;
 
 	mate = ide_find_port();
 	if (mate) {
-		ide_init_port_hw(mate, &hw[1]);
 		default_hwif_mmiops(mate);
 
+		hws[1] = &hw[1];
 		idx[1] = mate->index;
 	}
 
@@ -569,7 +568,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 		d.dma_ops = NULL;
 	}
 
-	ide_device_add(idx, &d);
+	ide_device_add(idx, &d, hws);
 
 	return 0;
 
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 2f311da4c96..e9831bbd988 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -29,8 +29,8 @@
 static int __init ide_arm_init(void)
 {
 	ide_hwif_t *hwif;
-	hw_regs_t hw;
 	unsigned long base = IDE_ARM_IO, ctl = IDE_ARM_IO + 0x206;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	if (!request_region(base, 8, DRV_NAME)) {
@@ -53,10 +53,9 @@ static int __init ide_arm_init(void)
 
 	hwif = ide_find_port();
 	if (hwif) {
-		ide_init_port_hw(hwif, &hw);
 		idx[0] = hwif->index;
 
-		ide_device_add(idx, NULL);
+		ide_device_add(idx, NULL, hws);
 	}
 
 	return 0;
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index c79b85b6e4a..023c10753f1 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -351,7 +351,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 	ide_hwif_t *hwif;
 	unsigned long base, rate;
 	int i;
-	hw_regs_t hw;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	clk = clk_get(NULL, "IDECLK");
@@ -400,13 +400,11 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 
 	i = hwif->index;
 
-	ide_init_port_hw(hwif, &hw);
-
 	default_hwif_mmiops(hwif);
 
 	idx[0] = i;
 
-	ide_device_add(idx, &palm_bk3710_port_info);
+	ide_device_add(idx, &palm_bk3710_port_info, hws);
 
 	return 0;
 out:
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index 43057e0303c..01896f6e8ac 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -35,8 +35,8 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 	ide_hwif_t *hwif;
 	void __iomem *base;
 	int ret;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-	hw_regs_t hw;
 
 	ret = ecard_request_resources(ec);
 	if (ret)
@@ -59,12 +59,11 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 		goto release;
 	}
 
-	ide_init_port_hw(hwif, &hw);
 	default_hwif_mmiops(hwif);
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx, &rapide_port_info);
+	ide_device_add(idx, &rapide_port_info, hws);
 
 	ecard_set_drvdata(ec, hwif);
 	goto out;
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 20fad6d542c..a71433b3d0f 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -184,9 +184,9 @@ static const struct ide_port_info h8300_port_info = {
 
 static int __init h8300_ide_init(void)
 {
-	hw_regs_t hw;
 	ide_hwif_t *hwif;
 	int index;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
@@ -205,12 +205,11 @@ static int __init h8300_ide_init(void)
 		return -ENOENT;
 
 	index = hwif->index;
-	ide_init_port_hw(hwif, &hw);
 	hwif_setup(hwif);
 
 	idx[0] = index;
 
-	ide_device_add(idx, &h8300_port_info);
+	ide_device_add(idx, &h8300_port_info, hws);
 
 	return 0;
 
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 2d92214096a..bb9fc905d60 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -31,7 +31,7 @@ static ssize_t store_add(struct class *cls, const char *buf, size_t n)
 	ide_hwif_t *hwif;
 	unsigned int base, ctl;
 	int irq;
-	hw_regs_t hw;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[] = { 0xff, 0xff, 0xff, 0xff };
 
 	if (sscanf(buf, "%x:%x:%d", &base, &ctl, &irq) != 3)
@@ -46,11 +46,9 @@ static ssize_t store_add(struct class *cls, const char *buf, size_t n)
 	hw.irq = irq;
 	hw.chipset = ide_generic;
 
-	ide_init_port_hw(hwif, &hw);
-
 	idx[0] = hwif->index;
 
-	ide_device_add(idx, NULL);
+	ide_device_add(idx, NULL, hws);
 
 	return n;
 };
@@ -90,6 +88,7 @@ static int __init ide_generic_sysfs_init(void)
 
 static int __init ide_generic_init(void)
 {
+	hw_regs_t hw[MAX_HWIFS], *hws[MAX_HWIFS];
 	u8 idx[MAX_HWIFS];
 	int i;
 
@@ -99,8 +98,8 @@ static int __init ide_generic_init(void)
 	for (i = 0; i < MAX_HWIFS; i++) {
 		ide_hwif_t *hwif;
 		unsigned long io_addr = ide_default_io_base(i);
-		hw_regs_t hw;
 
+		hws[i] = NULL;
 		idx[i] = 0xff;
 
 		if ((probe_mask & (1 << i)) && io_addr) {
@@ -129,17 +128,19 @@ static int __init ide_generic_init(void)
 				continue;
 			}
 
-			memset(&hw, 0, sizeof(hw));
-			ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
-			hw.irq = ide_default_irq(io_addr);
-			hw.chipset = ide_generic;
-			ide_init_port_hw(hwif, &hw);
+			hwif->chipset = ide_generic;
+
+			memset(&hw[i], 0, sizeof(hw[i]));
+			ide_std_init_ports(&hw[i], io_addr, io_addr + 0x206);
+			hw[i].irq = ide_default_irq(io_addr);
+			hw[i].chipset = ide_generic;
 
+			hws[i] = &hw[i];
 			idx[i] = i;
 		}
 	}
 
-	ide_device_add_all(idx, NULL);
+	ide_device_add_all(idx, NULL, hws);
 
 	if (ide_generic_sysfs_init())
 		printk(KERN_ERR DRV_NAME ": failed to create ide_generic "
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 03f2ef5470a..89cd5cbe857 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -29,9 +29,9 @@ static struct pnp_device_id idepnp_devices[] = {
 
 static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
-	hw_regs_t hw;
 	ide_hwif_t *hwif;
 	unsigned long base, ctl;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n");
 
@@ -64,11 +64,9 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 		u8 index = hwif->index;
 		u8 idx[4] = { index, 0xff, 0xff, 0xff };
 
-		ide_init_port_hw(hwif, &hw);
-
 		pnp_set_drvdata(dev, hwif);
 
-		ide_device_add(idx, NULL);
+		ide_device_add(idx, NULL, hws);
 
 		return 0;
 	}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 235ebdb29b2..9d8686a49fc 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1501,7 +1501,7 @@ out_found:
 }
 EXPORT_SYMBOL_GPL(ide_find_port_slot);
 
-int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
+int ide_device_add_all(u8 *idx, const struct ide_port_info *d, hw_regs_t **hws)
 {
 	ide_hwif_t *hwif, *mate = NULL;
 	int i, rc = 0;
@@ -1514,6 +1514,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
 
 		hwif = &ide_hwifs[idx[i]];
 
+		ide_init_port_hw(hwif, hws[i]);
 		ide_port_apply_params(hwif);
 
 		if (d == NULL) {
@@ -1603,15 +1604,18 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
 }
 EXPORT_SYMBOL_GPL(ide_device_add_all);
 
-int ide_device_add(u8 idx[4], const struct ide_port_info *d)
+int ide_device_add(u8 *idx, const struct ide_port_info *d, hw_regs_t **hws)
 {
+	hw_regs_t *hws_all[MAX_HWIFS];
 	u8 idx_all[MAX_HWIFS];
 	int i;
 
-	for (i = 0; i < MAX_HWIFS; i++)
+	for (i = 0; i < MAX_HWIFS; i++) {
+		hws_all[i] = (i < 4) ? hws[i] : NULL;
 		idx_all[i] = (i < 4) ? idx[i] : 0xff;
+	}
 
-	return ide_device_add_all(idx_all, d);
+	return ide_device_add_all(idx_all, d, hws_all);
 }
 EXPORT_SYMBOL_GPL(ide_device_add);
 
@@ -1634,8 +1638,8 @@ void ide_port_scan(ide_hwif_t *hwif)
 }
 EXPORT_SYMBOL_GPL(ide_port_scan);
 
-static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no,
-				const struct ide_port_info *d,
+static void ide_legacy_init_one(u8 *idx, hw_regs_t **hws, hw_regs_t *hw,
+				u8 port_no, const struct ide_port_info *d,
 				unsigned long config)
 {
 	ide_hwif_t *hwif;
@@ -1671,9 +1675,12 @@ static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no,
 
 	hwif = ide_find_port_slot(d);
 	if (hwif) {
-		ide_init_port_hw(hwif, hw);
+		hwif->chipset = hw->chipset;
+
 		if (config)
 			hwif->config_data = config;
+
+		hws[port_no] = hw;
 		idx[port_no] = hwif->index;
 	}
 }
@@ -1681,19 +1688,19 @@ static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no,
 int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
 {
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-	hw_regs_t hw[2];
+	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
 
 	memset(&hw, 0, sizeof(hw));
 
 	if ((d->host_flags & IDE_HFLAG_QD_2ND_PORT) == 0)
-		ide_legacy_init_one(idx, &hw[0], 0, d, config);
-	ide_legacy_init_one(idx, &hw[1], 1, d, config);
+		ide_legacy_init_one(idx, hws, &hw[0], 0, d, config);
+	ide_legacy_init_one(idx, hws, &hw[1], 1, d, config);
 
 	if (idx[0] == 0xff && idx[1] == 0xff &&
 	    (d->host_flags & IDE_HFLAG_SINGLE))
 		return -ENOENT;
 
-	ide_device_add(idx, d);
+	ide_device_add(idx, d, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index d4a6b102a77..b6018f7b090 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -288,7 +288,6 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
 	hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
 	hwif->ack_intr = hw->ack_intr;
 }
-EXPORT_SYMBOL_GPL(ide_init_port_hw);
 
 /*
  *	Locks for IDE setting functionality
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 0497e7f85b0..c61bc6a1db3 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -37,6 +37,8 @@
 #define CATWEASEL_NUM_HWIFS	3
 #define XSURF_NUM_HWIFS         2
 
+#define MAX_NUM_HWIFS		3
+
     /*
      *  Bases of the IDE interfaces (relative to the board address)
      */
@@ -148,7 +150,6 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
 
 static int __init buddha_init(void)
 {
-	hw_regs_t hw;
 	ide_hwif_t *hwif;
 	int i;
 
@@ -159,6 +160,7 @@ static int __init buddha_init(void)
 
 	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
 		unsigned long board;
+		hw_regs_t hw[MAX_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
 		u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
@@ -221,19 +223,19 @@ fail_base2:
 				ack_intr = xsurf_ack_intr;
 			}
 
-			buddha_setup_ports(&hw, base, ctl, irq_port, ack_intr);
+			buddha_setup_ports(&hw[i], base, ctl, irq_port,
+					   ack_intr);
 
 			hwif = ide_find_port();
 			if (hwif) {
-				u8 index = hwif->index;
-
-				ide_init_port_hw(hwif, &hw);
+				hwif->chipset = ide_generic;
 
-				idx[i] = index;
+				hws[i] = &hw[i];
+				idx[i] = hwif->index;
 			}
 		}
 
-		ide_device_add(idx, NULL);
+		ide_device_add(idx, NULL, hws);
 	}
 
 	return 0;
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 129a812bb57..1bb2aa72cc7 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -91,8 +91,8 @@ static void __init falconide_setup_ports(hw_regs_t *hw)
 
 static int __init falconide_init(void)
 {
-	hw_regs_t hw;
 	ide_hwif_t *hwif;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
 		return 0;
@@ -111,14 +111,12 @@ static int __init falconide_init(void)
 		u8 index = hwif->index;
 		u8 idx[4] = { index, 0xff, 0xff, 0xff };
 
-		ide_init_port_hw(hwif, &hw);
-
 		/* Atari has a byte-swapped IDE interface */
 		hwif->input_data  = falconide_input_data;
 		hwif->output_data = falconide_output_data;
 
 		ide_get_lock(NULL, NULL);
-		ide_device_add(idx, NULL);
+		ide_device_add(idx, NULL, hws);
 		ide_release_lock();
 	}
 
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index 7e74b20202d..e45c7341186 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -125,6 +125,7 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
 static int __init gayle_init(void)
 {
     int a4000, i;
+    hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
     u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
     if (!MACH_IS_AMIGA)
@@ -151,7 +152,6 @@ found:
     for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
 	unsigned long base, ctrlport, irqport;
 	ide_ack_intr_t *ack_intr;
-	hw_regs_t hw;
 	ide_hwif_t *hwif;
 	unsigned long phys_base, res_start, res_n;
 
@@ -179,20 +179,19 @@ found:
 	base = (unsigned long)ZTWO_VADDR(phys_base);
 	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
 
-	gayle_setup_ports(&hw, base, ctrlport, irqport, ack_intr);
+	gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
 
 	hwif = ide_find_port();
 	if (hwif) {
-	    u8 index = hwif->index;
+	    hwif->chipset = ide_generic;
 
-	    ide_init_port_hw(hwif, &hw);
-
-	    idx[i] = index;
+	    hws[i] = &hw[i];
+	    idx[i] = hwif->index;
 	} else
 	    release_mem_region(res_start, res_n);
     }
 
-    ide_device_add(idx, NULL);
+    ide_device_add(idx, NULL, hws);
 
     return 0;
 }
diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c
index 89c8ff0a4d0..6310dc50e3c 100644
--- a/drivers/ide/legacy/ide-4drives.c
+++ b/drivers/ide/legacy/ide-4drives.c
@@ -30,8 +30,8 @@ static int __init ide_4drives_init(void)
 {
 	ide_hwif_t *hwif, *mate;
 	unsigned long base = 0x1f0, ctl = 0x3f6;
+	hw_regs_t hw, *hws[] = { NULL, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-	hw_regs_t hw;
 
 	if (probe_4drives == 0)
 		return -ENODEV;
@@ -57,17 +57,19 @@ static int __init ide_4drives_init(void)
 
 	hwif = ide_find_port();
 	if (hwif) {
-		ide_init_port_hw(hwif, &hw);
+		hwif->chipset = ide_4drives;
+
+		hws[0] = &hw;
 		idx[0] = hwif->index;
 	}
 
 	mate = ide_find_port();
 	if (mate) {
-		ide_init_port_hw(mate, &hw);
+		hws[1] = &hw;
 		idx[1] = mate->index;
 	}
 
-	ide_device_add(idx, &ide_4drives_port_info);
+	ide_device_add(idx, &ide_4drives_port_info, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 27b1e0b7ecb..f93d5454ebf 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -161,8 +161,8 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl,
 				unsigned long irq, struct pcmcia_device *handle)
 {
     ide_hwif_t *hwif;
-    hw_regs_t hw;
     int i;
+    hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
     u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
     if (!request_region(io, 8, DRV_NAME)) {
@@ -188,13 +188,9 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl,
     if (hwif == NULL)
 	goto out_release;
 
-    i = hwif->index;
+    idx[0] = hwif->index;
 
-    ide_init_port_hw(hwif, &hw);
-
-    idx[0] = i;
-
-    ide_device_add(idx, &idecs_port_info);
+    ide_device_add(idx, &idecs_port_info, hws);
 
     if (hwif->present)
 	return hwif;
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
index a249562b34b..609da0d4319 100644
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -54,10 +54,9 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 	void __iomem *base, *alt_base;
 	ide_hwif_t *hwif;
 	struct pata_platform_info *pdata;
+	int ret = 0, mmio = 0;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-	int ret = 0;
-	int mmio = 0;
-	hw_regs_t hw;
 	struct ide_port_info d = platform_ide_port_info;
 
 	pdata = pdev->dev.platform_data;
@@ -104,8 +103,6 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 	plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start);
 	hw.dev = &pdev->dev;
 
-	ide_init_port_hw(hwif, &hw);
-
 	if (mmio) {
 		d.host_flags |= IDE_HFLAG_MMIO;
 		default_hwif_mmiops(hwif);
@@ -113,7 +110,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx, &d);
+	ide_device_add(idx, &d, hws);
 
 	platform_set_drvdata(pdev, hwif);
 
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index 0a6195bcfed..d839df2239f 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -95,7 +95,7 @@ static int __init macide_init(void)
 	ide_ack_intr_t *ack_intr;
 	unsigned long base;
 	int irq;
-	hw_regs_t hw;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	if (!MACH_IS_MAC)
 		return -ENODEV;
@@ -130,9 +130,7 @@ static int __init macide_init(void)
 		u8 index = hwif->index;
 		u8 idx[4] = { index, 0xff, 0xff, 0xff };
 
-		ide_init_port_hw(hwif, &hw);
-
-		ide_device_add(idx, NULL);
+		ide_device_add(idx, NULL, hws);
 	}
 
 	return 0;
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 9c2b9d078f6..fcb04b8b023 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -112,7 +112,7 @@ static int __init q40ide_init(void)
 {
     int i;
     ide_hwif_t *hwif;
-    const char *name;
+    hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
     u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
     if (!MACH_IS_Q40)
@@ -121,9 +121,8 @@ static int __init q40ide_init(void)
     printk(KERN_INFO "ide: Q40 IDE controller\n");
 
     for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
-	hw_regs_t hw;
+	const char *name = q40_ide_names[i];
 
-	name = q40_ide_names[i];
 	if (!request_region(pcide_bases[i], 8, name)) {
 		printk("could not reserve ports %lx-%lx for %s\n",
 		       pcide_bases[i],pcide_bases[i]+8,name);
@@ -135,24 +134,23 @@ static int __init q40ide_init(void)
 		release_region(pcide_bases[i], 8);
 		continue;
 	}
-	q40_ide_setup_ports(&hw, pcide_bases[i],
-			NULL,
-//			m68kide_iops,
+	q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
 			q40ide_default_irq(pcide_bases[i]));
 
 	hwif = ide_find_port();
 	if (hwif) {
-		ide_init_port_hw(hwif, &hw);
+		hwif->chipset = ide_generic;
 
 		/* Q40 has a byte-swapped IDE interface */
 		hwif->input_data  = q40ide_input_data;
 		hwif->output_data = q40ide_output_data;
 
+		hws[i] = &hw[i];
 		idx[i] = hwif->index;
 	}
     }
 
-    ide_device_add(idx, NULL);
+    ide_device_add(idx, NULL, hws);
 
     return 0;
 }
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 48d57cae63c..475da582fd8 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -546,8 +546,8 @@ static int au_ide_probe(struct device *dev)
 	ide_hwif_t *hwif;
 	struct resource *res;
 	int ret = 0;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-	hw_regs_t hw;
 
 #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
 	char *mode = "MWDMA2";
@@ -596,8 +596,6 @@ static int au_ide_probe(struct device *dev)
 	hw.dev = dev;
 	hw.chipset = ide_au1xxx;
 
-	ide_init_port_hw(hwif, &hw);
-
 	/* If the user has selected DDMA assisted copies,
 	   then set up a few local I/O function entry points 
 	*/
@@ -611,7 +609,7 @@ static int au_ide_probe(struct device *dev)
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx, &au1xxx_port_info);
+	ide_device_add(idx, &au1xxx_port_info, hws);
 
 	dev_set_drvdata(dev, hwif);
 
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
index 9f1212cc4ae..6da6844d2d8 100644
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -75,8 +75,8 @@ static int __devinit swarm_ide_probe(struct device *dev)
 	ide_hwif_t *hwif;
 	u8 __iomem *base;
 	phys_t offset, size;
-	hw_regs_t hw;
 	int i;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[] = { 0xff, 0xff, 0xff, 0xff };
 
 	if (!SIBYTE_HAVE_IDE)
@@ -120,14 +120,12 @@ static int __devinit swarm_ide_probe(struct device *dev)
 	if (hwif == NULL)
 		goto err;
 
-	ide_init_port_hw(hwif, &hw);
-
 	/* Setup MMIO ops. */
 	default_hwif_mmiops(hwif);
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx, &swarm_port_info);
+	ide_device_add(idx, &swarm_port_info, hws);
 
 	dev_set_drvdata(dev, hwif);
 
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 1ad1e23e310..ccde1e444e1 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -717,8 +717,8 @@ static int __init cmd640x_init(void)
 	int second_port_cmd640 = 0, rc;
 	const char *bus_type, *port2;
 	u8 b, cfr;
+	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-	hw_regs_t hw[2];
 
 	if (cmd640_vlb && probe_for_cmd640_vlb()) {
 		bus_type = "VLB";
@@ -787,7 +787,9 @@ static int __init cmd640x_init(void)
 	 * Initialize data for primary port
 	 */
 	if (cmd_hwif0) {
-		ide_init_port_hw(cmd_hwif0, &hw[0]);
+		cmd_hwif0->chipset = ide_cmd640;
+
+		hws[0] = &hw[0];
 		idx[0] = cmd_hwif0->index;
 	}
 
@@ -832,7 +834,7 @@ static int __init cmd640x_init(void)
 	if (second_port_cmd640) {
 		cmd_hwif1 = ide_find_port();
 		if (cmd_hwif1) {
-			ide_init_port_hw(cmd_hwif1, &hw[1]);
+			hws[1] = &hw[1];
 			idx[1] = cmd_hwif1->index;
 		}
 	}
@@ -843,7 +845,7 @@ static int __init cmd640x_init(void)
 	cmd640_dump_regs();
 #endif
 
-	ide_device_add(idx, &cmd640_port_info);
+	ide_device_add(idx, &cmd640_port_info, hws);
 
 	return 1;
 }
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index 992b1cf8db6..a13f2bc0665 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -146,6 +146,7 @@ static const struct ide_port_info cyrix_chipsets[] __devinitdata = {
 static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	const struct ide_port_info *d = &cyrix_chipsets[id->driver_data];
+	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	ide_setup_pci_noise(dev, d);
@@ -168,9 +169,9 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 	 *	do all the device setup for us
 	 */
 
-	ide_pci_setup_ports(dev, d, 14, &idx[0]);
+	ide_pci_setup_ports(dev, d, 14, &idx[0], &hw[0], &hws[0]);
 
-	ide_device_add(idx, d);
+	ide_device_add(idx, d, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index 0106e2a2df7..33fe15db408 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -57,9 +57,9 @@ static int __devinit
 delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 {
 	unsigned long base;
-	hw_regs_t hw;
 	ide_hwif_t *hwif = NULL;
 	int i, rc;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	rc = pci_enable_device(dev);
@@ -93,11 +93,9 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 
 	i = hwif->index;
 
-	ide_init_port_hw(hwif, &hw);
-
 	idx[0] = i;
 
-	ide_device_add(idx, &delkin_cb_port_info);
+	ide_device_add(idx, &delkin_cb_port_info, hws);
 
 	pci_set_drvdata(dev, hwif);
 
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 789c66dfbde..328e2df6655 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -554,7 +554,7 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 {
 	struct scc_ports *ports = pci_get_drvdata(dev);
 	ide_hwif_t *hwif = NULL;
-	hw_regs_t hw;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	int i;
 
@@ -568,11 +568,10 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 	hw.irq = dev->irq;
 	hw.dev = &dev->dev;
 	hw.chipset = ide_pci;
-	ide_init_port_hw(hwif, &hw);
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx, d);
+	ide_device_add(idx, d, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index c79ff5b4108..76afa1f9c59 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -584,8 +584,8 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	unsigned long bar0, cmd_phys_base, ctl;
 	void __iomem *virt_base;
 	ide_hwif_t *hwif;
+	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-	hw_regs_t hw;
 	struct ide_port_info d = sgiioc4_port_info;
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
@@ -622,8 +622,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	if (hwif == NULL)
 		goto err;
 
-	ide_init_port_hw(hwif, &hw);
-
 	/* The IOC4 uses MMIO rather than Port IO. */
 	default_hwif_mmiops(hwif);
 
@@ -634,7 +632,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 
 	idx[0] = hwif->index;
 
-	if (ide_device_add(idx, &d))
+	if (ide_device_add(idx, &d, hws))
 		return -EIO;
 
 	return 0;
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 4e2944ee76d..e68e33bb2c3 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1010,6 +1010,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	struct device_node *np = pmif->node;
 	const int *bidp;
 	ide_hwif_t *hwif;
+	hw_regs_t *hws[] = { hw, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	struct ide_port_info d = pmac_port_info;
 
@@ -1095,11 +1096,9 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	default_hwif_mmiops(hwif);
        	hwif->OUTBSYNC = pmac_outbsync;
 
-	ide_init_port_hw(hwif, hw);
-
 	idx[0] = hwif->index;
 
-	ide_device_add(idx, &d);
+	ide_device_add(idx, &d, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 7ae6ae45331..acb467c6f34 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -289,6 +289,7 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
  *	@d: IDE port info
  *	@port: port number
  *	@irq: PCI IRQ
+ *	@hw: hw_regs_t instance corresponding to this port
  *
  *	Perform the initial set up for the hardware interface structure. This
  *	is done per interface port rather than per PCI device. There may be
@@ -299,11 +300,11 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
 
 static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev,
 				      const struct ide_port_info *d,
-				      unsigned int port, int irq)
+				      unsigned int port, int irq,
+				      hw_regs_t *hw)
 {
 	unsigned long ctl = 0, base = 0;
 	ide_hwif_t *hwif;
-	struct hw_regs_s hw;
 
 	if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
 		if (ide_pci_check_iomem(dev, d, 2 * port) ||
@@ -327,17 +328,17 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev,
 		return NULL;
 	}
 
+	memset(hw, 0, sizeof(*hw));
+	hw->irq = irq;
+	hw->dev = &dev->dev;
+	hw->chipset = d->chipset ? d->chipset : ide_pci;
+	ide_std_init_ports(hw, base, ctl | 2);
+
 	hwif = ide_find_port_slot(d);
 	if (hwif == NULL)
 		return NULL;
 
-	memset(&hw, 0, sizeof(hw));
-	hw.irq = irq;
-	hw.dev = &dev->dev;
-	hw.chipset = d->chipset ? d->chipset : ide_pci;
-	ide_std_init_ports(&hw, base, ctl | 2);
-
-	ide_init_port_hw(hwif, &hw);
+	hwif->chipset = hw->chipset;
 
 	return hwif;
 }
@@ -430,6 +431,8 @@ out:
  *	@d: IDE port info
  *	@pciirq: IRQ line
  *	@idx: ATA index table to update
+ *	@hw: hw_regs_t instances corresponding to this PCI IDE device
+ *	@hws: hw_regs_t pointers table to update
  *
  *	Scan the interfaces attached to this device and do any
  *	necessary per port setup. Attach the devices and ask the
@@ -440,7 +443,8 @@ out:
  *	where the chipset setup is not the default PCI IDE one.
  */
 
-void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx)
+void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
+			 int pciirq, u8 *idx, hw_regs_t *hw, hw_regs_t **hws)
 {
 	int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
 	ide_hwif_t *hwif;
@@ -459,10 +463,11 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int
 			continue;	/* port not enabled */
 		}
 
-		hwif = ide_hwif_configure(dev, d, port, pciirq);
+		hwif = ide_hwif_configure(dev, d, port, pciirq, hw + port);
 		if (hwif == NULL)
 			continue;
 
+		*(hws + port) = hw + port;
 		*(idx + port) = hwif->index;
 	}
 }
@@ -537,15 +542,16 @@ out:
 int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 {
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 	int ret;
 
 	ret = do_ide_setup_pci_device(dev, d, 1);
 
 	if (ret >= 0) {
 		/* FIXME: silent failure can happen */
-		ide_pci_setup_ports(dev, d, ret, &idx[0]);
+		ide_pci_setup_ports(dev, d, ret, &idx[0], &hw[0], &hws[0]);
 
-		ide_device_add(idx, d);
+		ide_device_add(idx, d, hws);
 	}
 
 	return ret;
@@ -557,6 +563,7 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 {
 	struct pci_dev *pdev[] = { dev1, dev2 };
 	int ret, i;
+	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	for (i = 0; i < 2; i++) {
@@ -570,10 +577,11 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 			goto out;
 
 		/* FIXME: silent failure can happen */
-		ide_pci_setup_ports(pdev[i], d, ret, &idx[i*2]);
+		ide_pci_setup_ports(pdev[i], d, ret, &idx[i*2], &hw[i*2],
+				    &hws[i*2]);
 	}
 
-	ide_device_add(idx, d);
+	ide_device_add(idx, d, hws);
 out:
 	return ret;
 }
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 4726126f5a5..f58548becac 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1000,7 +1000,8 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o
 #define ide_pci_register_driver(d) pci_register_driver(d)
 #endif
 
-void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *);
+void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
+			 u8 *, hw_regs_t *, hw_regs_t **);
 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -1217,8 +1218,8 @@ void ide_undecoded_slave(ide_drive_t *);
 
 void ide_port_apply_params(ide_hwif_t *);
 
-int ide_device_add_all(u8 *idx, const struct ide_port_info *);
-int ide_device_add(u8 idx[4], const struct ide_port_info *);
+int ide_device_add_all(u8 *, const struct ide_port_info *, hw_regs_t **);
+int ide_device_add(u8 *, const struct ide_port_info *, hw_regs_t **);
 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
 void ide_port_unregister_devices(ide_hwif_t *);
 void ide_port_scan(ide_hwif_t *);
-- 
cgit v1.2.3


From b2f951aabc9cc7d5fb987aeec9aef96ccce618a5 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:50 +0200
Subject: ide: add ->read_sff_dma_status method

Add ->read_sff_dma_status method for reading DMA Status register
and use it instead of ->INB.

While at it:

* Use inb() directly in ns87415.c::ns87415_dma_end().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-dma.c      | 12 ++++++------
 drivers/ide/ide-iops.c     | 10 ++++++++++
 drivers/ide/pci/ns87415.c  | 13 ++++++++++---
 drivers/ide/pci/scc_pata.c |  7 +++++++
 include/linux/ide.h        |  2 ++
 5 files changed, 35 insertions(+), 9 deletions(-)

diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 7ee44f86bc5..ebddedde24a 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -334,7 +334,7 @@ static int config_drive_for_dma (ide_drive_t *drive)
 static int dma_timer_expiry (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	u8 dma_stat		= hwif->INB(hwif->dma_status);
+	u8 dma_stat		= hwif->read_sff_dma_status(hwif);
 
 	printk(KERN_WARNING "%s: dma_timer_expiry: dma status == 0x%02x\n",
 		drive->name, dma_stat);
@@ -369,7 +369,7 @@ void ide_dma_host_set(ide_drive_t *drive, int on)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	u8 unit			= (drive->select.b.unit & 0x01);
-	u8 dma_stat		= hwif->INB(hwif->dma_status);
+	u8 dma_stat		= hwif->read_sff_dma_status(hwif);
 
 	if (on)
 		dma_stat |= (1 << (5 + unit));
@@ -472,8 +472,8 @@ int ide_dma_setup(ide_drive_t *drive)
 	/* specify r/w */
 	hwif->OUTB(reading, hwif->dma_command);
 
-	/* read dma_status for INTR & ERROR flags */
-	dma_stat = hwif->INB(hwif->dma_status);
+	/* read DMA status for INTR & ERROR flags */
+	dma_stat = hwif->read_sff_dma_status(hwif);
 
 	/* clear INTR & ERROR flags */
 	hwif->OUTB(dma_stat|6, hwif->dma_status);
@@ -520,7 +520,7 @@ int __ide_dma_end (ide_drive_t *drive)
 	/* stop DMA */
 	hwif->OUTB(dma_cmd&~1, hwif->dma_command);
 	/* get DMA status */
-	dma_stat = hwif->INB(hwif->dma_status);
+	dma_stat = hwif->read_sff_dma_status(hwif);
 	/* clear the INTR & ERROR bits */
 	hwif->OUTB(dma_stat|6, hwif->dma_status);
 	/* purge DMA mappings */
@@ -537,7 +537,7 @@ EXPORT_SYMBOL(__ide_dma_end);
 int ide_dma_test_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	u8 dma_stat		= hwif->INB(hwif->dma_status);
+	u8 dma_stat		= hwif->read_sff_dma_status(hwif);
 
 	/* return 1 if INTR asserted */
 	if ((dma_stat & 4) == 4)
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 44aaec256a3..a09bf4369ed 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -103,6 +103,14 @@ void SELECT_MASK(ide_drive_t *drive, int mask)
 		port_ops->maskproc(drive, mask);
 }
 
+static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
+{
+	if (hwif->host_flags & IDE_HFLAG_MMIO)
+		return readb((void __iomem *)hwif->dma_status);
+	else
+		return inb(hwif->dma_status);
+}
+
 static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -323,6 +331,8 @@ static void ata_output_data(ide_drive_t *drive, struct request *rq,
 
 void default_hwif_transport(ide_hwif_t *hwif)
 {
+	hwif->read_sff_dma_status = ide_read_sff_dma_status;
+
 	hwif->tf_load	  = ide_tf_load;
 	hwif->tf_read	  = ide_tf_read;
 
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index 45ba71a7182..9ffdbb89df5 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -63,6 +63,11 @@ static u8 superio_ide_inb (unsigned long port)
 	return inb(port);
 }
 
+static u8 superio_read_sff_dma_status(ide_hwif_t *hwif)
+{
+	return superio_ide_inb(hwif->dma_status);
+}
+
 static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
 {
 	struct ide_io_ports *io_ports = &drive->hwif->io_ports;
@@ -122,6 +127,8 @@ static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
 	tmp = superio_ide_inb(superio_ide_dma_status[port]);
 	outb(tmp | 0x66, superio_ide_dma_status[port]);
 
+	hwif->read_sff_dma_status = superio_read_sff_dma_status;
+
 	hwif->tf_read = superio_tf_read;
 
 	/* We need to override inb to workaround a SuperIO errata */
@@ -200,13 +207,13 @@ static int ns87415_dma_end(ide_drive_t *drive)
 	u8 dma_stat = 0, dma_cmd = 0;
 
 	drive->waiting_for_dma = 0;
-	dma_stat = hwif->INB(hwif->dma_status);
+	dma_stat = hwif->read_sff_dma_status(hwif);
 	/* get dma command mode */
-	dma_cmd = hwif->INB(hwif->dma_command);
+	dma_cmd = inb(hwif->dma_command);
 	/* stop DMA */
 	outb(dma_cmd & ~1, hwif->dma_command);
 	/* from ERRATA: clear the INTR & ERROR bits */
-	dma_cmd = hwif->INB(hwif->dma_command);
+	dma_cmd = inb(hwif->dma_command);
 	outb(dma_cmd | 6, hwif->dma_command);
 	/* and free any DMA resources */
 	ide_destroy_dmatable(drive);
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 328e2df6655..7a2a7b2a319 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -126,6 +126,11 @@ static u8 scc_ide_inb(unsigned long port)
 	return (u8)data;
 }
 
+static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
+{
+	return (u8)in_be32((void *)hwif->dma_status);
+}
+
 static void scc_ide_insw(unsigned long port, void *addr, u32 count)
 {
 	u16 *ptr = (u16 *)addr;
@@ -773,6 +778,8 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
 
 	ide_set_hwifdata(hwif, ports);
 
+	hwif->read_sff_dma_status = scc_read_sff_dma_status;
+
 	hwif->tf_load = scc_tf_load;
 	hwif->tf_read = scc_tf_read;
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index f58548becac..ca0efbb0a8b 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -489,6 +489,8 @@ typedef struct hwif_s {
 	const struct ide_port_ops	*port_ops;
 	const struct ide_dma_ops	*dma_ops;
 
+	u8 (*read_sff_dma_status)(struct hwif_s *);
+
 	void (*tf_load)(ide_drive_t *, struct ide_task_s *);
 	void (*tf_read)(ide_drive_t *, struct ide_task_s *);
 
-- 
cgit v1.2.3


From ab86f91e8739e0b1587a16e4792ab5e4bb11f1b5 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:50 +0200
Subject: ide: use I/O ops directly in ide-dma.c

Use I/O ops directly in ide_dma_host_set(), ide_dma_setup(),
ide_dma_start() and __ide_dma_end().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-dma.c | 59 +++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 45 insertions(+), 14 deletions(-)

diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index ebddedde24a..f3229642c05 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -376,7 +376,10 @@ void ide_dma_host_set(ide_drive_t *drive, int on)
 	else
 		dma_stat &= ~(1 << (5 + unit));
 
-	hwif->OUTB(dma_stat, hwif->dma_status);
+	if (hwif->host_flags & IDE_HFLAG_MMIO)
+		writeb(dma_stat, (void __iomem *)hwif->dma_status);
+	else
+		outb(dma_stat, hwif->dma_status);
 }
 
 EXPORT_SYMBOL_GPL(ide_dma_host_set);
@@ -449,6 +452,7 @@ int ide_dma_setup(ide_drive_t *drive)
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq = HWGROUP(drive)->rq;
 	unsigned int reading;
+	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
 	u8 dma_stat;
 
 	if (rq_data_dir(rq))
@@ -470,13 +474,20 @@ int ide_dma_setup(ide_drive_t *drive)
 		outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
 
 	/* specify r/w */
-	hwif->OUTB(reading, hwif->dma_command);
+	if (mmio)
+		writeb(reading, (void __iomem *)hwif->dma_command);
+	else
+		outb(reading, hwif->dma_command);
 
 	/* read DMA status for INTR & ERROR flags */
 	dma_stat = hwif->read_sff_dma_status(hwif);
 
 	/* clear INTR & ERROR flags */
-	hwif->OUTB(dma_stat|6, hwif->dma_status);
+	if (mmio)
+		writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
+	else
+		outb(dma_stat | 6, hwif->dma_status);
+
 	drive->waiting_for_dma = 1;
 	return 0;
 }
@@ -492,16 +503,23 @@ EXPORT_SYMBOL_GPL(ide_dma_exec_cmd);
 
 void ide_dma_start(ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= HWIF(drive);
-	u8 dma_cmd		= hwif->INB(hwif->dma_command);
+	ide_hwif_t *hwif = drive->hwif;
+	u8 dma_cmd;
 
 	/* Note that this is done *after* the cmd has
 	 * been issued to the drive, as per the BM-IDE spec.
 	 * The Promise Ultra33 doesn't work correctly when
 	 * we do this part before issuing the drive cmd.
 	 */
-	/* start DMA */
-	hwif->OUTB(dma_cmd|1, hwif->dma_command);
+	if (hwif->host_flags & IDE_HFLAG_MMIO) {
+		dma_cmd = readb((void __iomem *)hwif->dma_command);
+		/* start DMA */
+		writeb(dma_cmd | 1, (void __iomem *)hwif->dma_command);
+	} else {
+		dma_cmd = inb(hwif->dma_command);
+		outb(dma_cmd | 1, hwif->dma_command);
+	}
+
 	hwif->dma = 1;
 	wmb();
 }
@@ -511,18 +529,31 @@ EXPORT_SYMBOL_GPL(ide_dma_start);
 /* returns 1 on error, 0 otherwise */
 int __ide_dma_end (ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= HWIF(drive);
+	ide_hwif_t *hwif = drive->hwif;
+	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
 	u8 dma_stat = 0, dma_cmd = 0;
 
 	drive->waiting_for_dma = 0;
-	/* get dma_command mode */
-	dma_cmd = hwif->INB(hwif->dma_command);
-	/* stop DMA */
-	hwif->OUTB(dma_cmd&~1, hwif->dma_command);
+
+	if (mmio) {
+		/* get DMA command mode */
+		dma_cmd = readb((void __iomem *)hwif->dma_command);
+		/* stop DMA */
+		writeb(dma_cmd & ~1, (void __iomem *)hwif->dma_command);
+	} else {
+		dma_cmd = inb(hwif->dma_command);
+		outb(dma_cmd & ~1, hwif->dma_command);
+	}
+
 	/* get DMA status */
 	dma_stat = hwif->read_sff_dma_status(hwif);
-	/* clear the INTR & ERROR bits */
-	hwif->OUTB(dma_stat|6, hwif->dma_status);
+
+	if (mmio)
+		/* clear the INTR & ERROR bits */
+		writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
+	else
+		outb(dma_stat | 6, hwif->dma_status);
+
 	/* purge DMA mappings */
 	ide_destroy_dmatable(drive);
 	/* verify good DMA status */
-- 
cgit v1.2.3


From cab7f8eda40d3e3e16b137c67cdddc2cf893c5d7 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:51 +0200
Subject: ide: remove ->dma_{status,command} fields from ide_hwif_t

* Use ->dma_base + offset instead of ->dma_{status,command}
  and remove no longer needed ->dma_{status,command}.

While at it:

* Use ATA_DMA_* defines.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-dma.c          | 42 +++++++++++++++++++++---------------------
 drivers/ide/ide-iops.c         |  4 ++--
 drivers/ide/pci/cmd64x.c       | 12 ++++++------
 drivers/ide/pci/hpt366.c       | 10 +++++-----
 drivers/ide/pci/ns87415.c      | 14 +++++++-------
 drivers/ide/pci/pdc202xx_old.c |  2 +-
 drivers/ide/pci/piix.c         |  4 ++--
 drivers/ide/pci/scc_pata.c     | 38 ++++++++++++++++++--------------------
 drivers/ide/pci/siimage.c      |  4 ++--
 drivers/ide/pci/sl82c105.c     |  4 ++--
 drivers/ide/pci/tc86c001.c     | 13 ++++++++-----
 include/linux/ide.h            |  2 --
 12 files changed, 74 insertions(+), 75 deletions(-)

diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index f3229642c05..d98a9da2699 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -377,9 +377,10 @@ void ide_dma_host_set(ide_drive_t *drive, int on)
 		dma_stat &= ~(1 << (5 + unit));
 
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
-		writeb(dma_stat, (void __iomem *)hwif->dma_status);
+		writeb(dma_stat,
+		       (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
 	else
-		outb(dma_stat, hwif->dma_status);
+		outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
 }
 
 EXPORT_SYMBOL_GPL(ide_dma_host_set);
@@ -475,18 +476,19 @@ int ide_dma_setup(ide_drive_t *drive)
 
 	/* specify r/w */
 	if (mmio)
-		writeb(reading, (void __iomem *)hwif->dma_command);
+		writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
 	else
-		outb(reading, hwif->dma_command);
+		outb(reading, hwif->dma_base + ATA_DMA_CMD);
 
 	/* read DMA status for INTR & ERROR flags */
 	dma_stat = hwif->read_sff_dma_status(hwif);
 
 	/* clear INTR & ERROR flags */
 	if (mmio)
-		writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
+		writeb(dma_stat | 6,
+		       (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
 	else
-		outb(dma_stat | 6, hwif->dma_status);
+		outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
 
 	drive->waiting_for_dma = 1;
 	return 0;
@@ -512,12 +514,13 @@ void ide_dma_start(ide_drive_t *drive)
 	 * we do this part before issuing the drive cmd.
 	 */
 	if (hwif->host_flags & IDE_HFLAG_MMIO) {
-		dma_cmd = readb((void __iomem *)hwif->dma_command);
+		dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
 		/* start DMA */
-		writeb(dma_cmd | 1, (void __iomem *)hwif->dma_command);
+		writeb(dma_cmd | 1,
+		       (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
 	} else {
-		dma_cmd = inb(hwif->dma_command);
-		outb(dma_cmd | 1, hwif->dma_command);
+		dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+		outb(dma_cmd | 1, hwif->dma_base + ATA_DMA_CMD);
 	}
 
 	hwif->dma = 1;
@@ -537,12 +540,13 @@ int __ide_dma_end (ide_drive_t *drive)
 
 	if (mmio) {
 		/* get DMA command mode */
-		dma_cmd = readb((void __iomem *)hwif->dma_command);
+		dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
 		/* stop DMA */
-		writeb(dma_cmd & ~1, (void __iomem *)hwif->dma_command);
+		writeb(dma_cmd & ~1,
+		       (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
 	} else {
-		dma_cmd = inb(hwif->dma_command);
-		outb(dma_cmd & ~1, hwif->dma_command);
+		dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+		outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
 	}
 
 	/* get DMA status */
@@ -550,9 +554,10 @@ int __ide_dma_end (ide_drive_t *drive)
 
 	if (mmio)
 		/* clear the INTR & ERROR bits */
-		writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
+		writeb(dma_stat | 6,
+		       (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
 	else
-		outb(dma_stat | 6, hwif->dma_status);
+		outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
 
 	/* purge DMA mappings */
 	ide_destroy_dmatable(drive);
@@ -888,11 +893,6 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
 {
 	hwif->dma_base = base;
 
-	if (!hwif->dma_command)
-		hwif->dma_command	= hwif->dma_base + 0;
-	if (!hwif->dma_status)
-		hwif->dma_status	= hwif->dma_base + 2;
-
 	hwif->dma_ops = &sff_dma_ops;
 }
 
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index a09bf4369ed..17cad6c39ee 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -106,9 +106,9 @@ void SELECT_MASK(ide_drive_t *drive, int mask)
 static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
 {
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
-		return readb((void __iomem *)hwif->dma_status);
+		return readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
 	else
-		return inb(hwif->dma_status);
+		return inb(hwif->dma_base + ATA_DMA_STATUS);
 }
 
 static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index cfa784bacf4..ce58bfcdb3c 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -262,7 +262,7 @@ static int cmd648_dma_test_irq(ide_drive_t *drive)
 	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
 	u8 irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
 						  MRDMODE_INTR_CH0;
-	u8 dma_stat		= inb(hwif->dma_status);
+	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 	u8 mrdmode		= inb(base + 1);
 
 #ifdef DEBUG
@@ -286,7 +286,7 @@ static int cmd64x_dma_test_irq(ide_drive_t *drive)
 	int irq_reg		= hwif->channel ? ARTTIM23 : CFR;
 	u8  irq_mask		= hwif->channel ? ARTTIM23_INTR_CH1 :
 						  CFR_INTR_CH0;
-	u8  dma_stat		= inb(hwif->dma_status);
+	u8  dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 	u8  irq_stat		= 0;
 
 	(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
@@ -317,13 +317,13 @@ static int cmd646_1_dma_end(ide_drive_t *drive)
 
 	drive->waiting_for_dma = 0;
 	/* get DMA status */
-	dma_stat = inb(hwif->dma_status);
+	dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
 	/* read DMA command state */
-	dma_cmd = inb(hwif->dma_command);
+	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	/* stop DMA */
-	outb(dma_cmd & ~1, hwif->dma_command);
+	outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
 	/* clear the INTR & ERROR bits */
-	outb(dma_stat | 6, hwif->dma_status);
+	outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
 	/* and free any DMA resources */
 	ide_destroy_dmatable(drive);
 	/* verify good DMA status */
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 397c6cbe953..d2f470ec805 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -801,9 +801,9 @@ static void hpt370_irq_timeout(ide_drive_t *drive)
 	printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
 
 	/* get DMA command mode */
-	dma_cmd = inb(hwif->dma_command);
+	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	/* stop DMA */
-	outb(dma_cmd & ~0x1, hwif->dma_command);
+	outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD);
 	hpt370_clear_engine(drive);
 }
 
@@ -818,12 +818,12 @@ static void hpt370_dma_start(ide_drive_t *drive)
 static int hpt370_dma_end(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	u8  dma_stat		= inb(hwif->dma_status);
+	u8  dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 
 	if (dma_stat & 0x01) {
 		/* wait a little */
 		udelay(20);
-		dma_stat = inb(hwif->dma_status);
+		dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
 		if (dma_stat & 0x01)
 			hpt370_irq_timeout(drive);
 	}
@@ -850,7 +850,7 @@ static int hpt374_dma_test_irq(ide_drive_t *drive)
 		return 0;
 	}
 
-	dma_stat = inb(hwif->dma_status);
+	dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
 	/* return 1 if INTR asserted */
 	if (dma_stat & 4)
 		return 1;
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index 9ffdbb89df5..76ce112fd85 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -65,7 +65,7 @@ static u8 superio_ide_inb (unsigned long port)
 
 static u8 superio_read_sff_dma_status(ide_hwif_t *hwif)
 {
-	return superio_ide_inb(hwif->dma_status);
+	return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
 }
 
 static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
@@ -208,13 +208,13 @@ static int ns87415_dma_end(ide_drive_t *drive)
 
 	drive->waiting_for_dma = 0;
 	dma_stat = hwif->read_sff_dma_status(hwif);
-	/* get dma command mode */
-	dma_cmd = inb(hwif->dma_command);
+	/* get DMA command mode */
+	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	/* stop DMA */
-	outb(dma_cmd & ~1, hwif->dma_command);
+	outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
 	/* from ERRATA: clear the INTR & ERROR bits */
-	dma_cmd = inb(hwif->dma_command);
-	outb(dma_cmd | 6, hwif->dma_command);
+	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+	outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD);
 	/* and free any DMA resources */
 	ide_destroy_dmatable(drive);
 	/* verify good DMA status */
@@ -298,7 +298,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
 	if (!hwif->dma_base)
 		return;
 
-	outb(0x60, hwif->dma_status);
+	outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
 }
 
 static const struct ide_port_ops ns87415_port_ops = {
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index fca89eda5c0..1c2f9df3112 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -206,7 +206,7 @@ static int pdc202xx_dma_test_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	unsigned long high_16	= hwif->extra_base - 16;
-	u8 dma_stat		= inb(hwif->dma_status);
+	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 	u8 sc1d			= inb(high_16 + 0x001d);
 
 	if (hwif->channel) {
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index f04738d14a6..0ce41b4ddda 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -227,9 +227,9 @@ static void piix_dma_clear_irq(ide_drive_t *drive)
 	u8 dma_stat;
 
 	/* clear the INTR & ERROR bits */
-	dma_stat = inb(hwif->dma_status);
+	dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
 	/* Should we force the bit as well ? */
-	outb(dma_stat, hwif->dma_status);
+	outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
 }
 
 struct ich_laptop {
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 7a2a7b2a319..fc163a7772a 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -128,7 +128,7 @@ static u8 scc_ide_inb(unsigned long port)
 
 static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
 {
-	return (u8)in_be32((void *)hwif->dma_status);
+	return (u8)in_be32((void *)(hwif->dma_base + 4));
 }
 
 static void scc_ide_insw(unsigned long port, void *addr, u32 count)
@@ -266,14 +266,14 @@ static void scc_dma_host_set(ide_drive_t *drive, int on)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	u8 unit = (drive->select.b.unit & 0x01);
-	u8 dma_stat = scc_ide_inb(hwif->dma_status);
+	u8 dma_stat = scc_ide_inb(hwif->dma_base + 4);
 
 	if (on)
 		dma_stat |= (1 << (5 + unit));
 	else
 		dma_stat &= ~(1 << (5 + unit));
 
-	scc_ide_outb(dma_stat, hwif->dma_status);
+	scc_ide_outb(dma_stat, hwif->dma_base + 4);
 }
 
 /**
@@ -309,13 +309,13 @@ static int scc_dma_setup(ide_drive_t *drive)
 	out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
 
 	/* specify r/w */
-	out_be32((void __iomem *)hwif->dma_command, reading);
+	out_be32((void __iomem *)hwif->dma_base, reading);
 
-	/* read dma_status for INTR & ERROR flags */
-	dma_stat = in_be32((void __iomem *)hwif->dma_status);
+	/* read DMA status for INTR & ERROR flags */
+	dma_stat = in_be32((void __iomem *)(hwif->dma_base + 4));
 
 	/* clear INTR & ERROR flags */
-	out_be32((void __iomem *)hwif->dma_status, dma_stat|6);
+	out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
 	drive->waiting_for_dma = 1;
 	return 0;
 }
@@ -323,10 +323,10 @@ static int scc_dma_setup(ide_drive_t *drive)
 static void scc_dma_start(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	u8 dma_cmd = scc_ide_inb(hwif->dma_command);
+	u8 dma_cmd = scc_ide_inb(hwif->dma_base);
 
 	/* start DMA */
-	scc_ide_outb(dma_cmd | 1, hwif->dma_command);
+	scc_ide_outb(dma_cmd | 1, hwif->dma_base);
 	hwif->dma = 1;
 	wmb();
 }
@@ -338,13 +338,13 @@ static int __scc_dma_end(ide_drive_t *drive)
 
 	drive->waiting_for_dma = 0;
 	/* get DMA command mode */
-	dma_cmd = scc_ide_inb(hwif->dma_command);
+	dma_cmd = scc_ide_inb(hwif->dma_base);
 	/* stop DMA */
-	scc_ide_outb(dma_cmd & ~1, hwif->dma_command);
+	scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
 	/* get DMA status */
-	dma_stat = scc_ide_inb(hwif->dma_status);
+	dma_stat = scc_ide_inb(hwif->dma_base + 4);
 	/* clear the INTR & ERROR bits */
-	scc_ide_outb(dma_stat | 6, hwif->dma_status);
+	scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
 	/* purge DMA mappings */
 	ide_destroy_dmatable(drive);
 	/* verify good DMA status */
@@ -364,6 +364,7 @@ static int __scc_dma_end(ide_drive_t *drive)
 static int scc_dma_end(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = HWIF(drive);
+	void __iomem *dma_base = (void __iomem *)hwif->dma_base;
 	unsigned long intsts_port = hwif->dma_base + 0x014;
 	u32 reg;
 	int dma_stat, data_loss = 0;
@@ -402,7 +403,7 @@ static int scc_dma_end(ide_drive_t *drive)
 			printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
 			out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
 
-			out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
 			continue;
 		}
 
@@ -417,7 +418,7 @@ static int scc_dma_end(ide_drive_t *drive)
 
 			out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
 
-			out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
 			continue;
 		}
 
@@ -425,12 +426,12 @@ static int scc_dma_end(ide_drive_t *drive)
 			printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
 			out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
 
-			out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
 			continue;
 		}
 
 		if (reg & INTSTS_ICERR) {
-			out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
 
 			printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
 			out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
@@ -832,9 +833,6 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
 
 	ports->hwif = hwif;
 
-	hwif->dma_command = hwif->dma_base;
-	hwif->dma_status = hwif->dma_base + 0x04;
-
 	/* PTERADD */
 	out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
 
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 6e9d7655d89..21d7137f7d6 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -334,7 +334,7 @@ static int siimage_io_dma_test_irq(ide_drive_t *drive)
 	unsigned long addr	= siimage_selreg(hwif, 1);
 
 	/* return 1 if INTR asserted */
-	if (hwif->INB(hwif->dma_status) & 4)
+	if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4)
 		return 1;
 
 	/* return 1 if Device INTR asserted */
@@ -382,7 +382,7 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
 	}
 
 	/* return 1 if INTR asserted */
-	if (readb((void __iomem *)hwif->dma_status) & 0x04)
+	if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
 		return 1;
 
 	/* return 1 if Device INTR asserted */
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 6efbde29717..f82a6502c1b 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -157,9 +157,9 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
 	 * Was DMA enabled?  If so, disable it - we're resetting the
 	 * host.  The IDE layer will be handling the drive for us.
 	 */
-	dma_cmd = inb(hwif->dma_command);
+	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	if (dma_cmd & 1) {
-		outb(dma_cmd & ~1, hwif->dma_command);
+		outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
 		printk("sl82c105: DMA was enabled\n");
 	}
 
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 9b4b27a4c71..a81d47c55ce 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -63,7 +63,7 @@ static int tc86c001_timer_expiry(ide_drive_t *drive)
 	ide_hwif_t *hwif	= HWIF(drive);
 	ide_expiry_t *expiry	= ide_get_hwifdata(hwif);
 	ide_hwgroup_t *hwgroup	= HWGROUP(drive);
-	u8 dma_stat		= inb(hwif->dma_status);
+	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 
 	/* Restore a higher level driver's expiry handler first. */
 	hwgroup->expiry	= expiry;
@@ -71,21 +71,24 @@ static int tc86c001_timer_expiry(ide_drive_t *drive)
 	if ((dma_stat & 5) == 1) {	/* DMA active and no interrupt */
 		unsigned long sc_base	= hwif->config_data;
 		unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
-		u8 dma_cmd		= inb(hwif->dma_command);
+		u8 dma_cmd		= inb(hwif->dma_base + ATA_DMA_CMD);
 
 		printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
 		       "attempting recovery...\n", drive->name);
 
 		/* Stop DMA */
-		outb(dma_cmd & ~0x01, hwif->dma_command);
+		outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
 
 		/* Setup the dummy DMA transfer */
 		outw(0, sc_base + 0x0a);	/* Sector Count */
 		outw(0, twcr_port);	/* Transfer Word Count 1 or 2 */
 
 		/* Start the dummy DMA transfer */
-		outb(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
-		outb(0x01, hwif->dma_command); /* set START_STOPBM */
+
+		/* clear R_OR_WCTR for write */
+		outb(0x00, hwif->dma_base + ATA_DMA_CMD);
+		/* set START_STOPBM */
+		outb(0x01, hwif->dma_base + ATA_DMA_CMD);
 
 		/*
 		 * If an interrupt was pending, it should come thru shortly.
diff --git a/include/linux/ide.h b/include/linux/ide.h
index ca0efbb0a8b..85a32f472ef 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -526,8 +526,6 @@ typedef struct hwif_s {
 	int		irq;		/* our irq number */
 
 	unsigned long	dma_base;	/* base addr for dma ports */
-	unsigned long	dma_command;	/* dma command register */
-	unsigned long	dma_status;	/* dma status register */
 
 	unsigned long	config_data;	/* for use by chipset-specific code */
 	unsigned long	select_data;	/* for use by chipset-specific code */
-- 
cgit v1.2.3


From 81e8d5a34f7d2a2acbe309cfa5810a9699a63239 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:51 +0200
Subject: ide: remove ide_setup_dma()

Export sff_dma_ops and then remove ide_setup_dma().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/palm_bk3710.c |  7 +++----
 drivers/ide/ide-dma.c         | 12 ++----------
 drivers/ide/pci/alim15x3.c    |  4 +++-
 drivers/ide/pci/hpt366.c      |  4 +++-
 drivers/ide/setup-pci.c       |  4 +++-
 include/linux/ide.h           |  2 +-
 6 files changed, 15 insertions(+), 18 deletions(-)

diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 023c10753f1..0229d794d90 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -316,15 +316,14 @@ static u8 __devinit palm_bk3710_cable_detect(ide_hwif_t *hwif)
 static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif,
 					  const struct ide_port_info *d)
 {
-	unsigned long base =
-		hwif->io_ports.data_addr - IDE_PALM_ATA_PRI_REG_OFFSET;
-
 	printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
 
 	if (ide_allocate_dma_engine(hwif))
 		return -1;
 
-	ide_setup_dma(hwif, base);
+	hwif->dma_base = hwif->io_ports.data_addr - IDE_PALM_ATA_PRI_REG_OFFSET;
+
+	hwif->dma_ops = &sff_dma_ops;
 
 	return 0;
 }
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index d98a9da2699..ac342ebf6c5 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -878,7 +878,7 @@ int ide_allocate_dma_engine(ide_hwif_t *hwif)
 }
 EXPORT_SYMBOL_GPL(ide_allocate_dma_engine);
 
-static const struct ide_dma_ops sff_dma_ops = {
+const struct ide_dma_ops sff_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
 	.dma_exec_cmd		= ide_dma_exec_cmd,
@@ -888,13 +888,5 @@ static const struct ide_dma_ops sff_dma_ops = {
 	.dma_timeout		= ide_dma_timeout,
 	.dma_lost_irq		= ide_dma_lost_irq,
 };
-
-void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
-{
-	hwif->dma_base = base;
-
-	hwif->dma_ops = &sff_dma_ops;
-}
-
-EXPORT_SYMBOL_GPL(ide_setup_dma);
+EXPORT_SYMBOL_GPL(sff_dma_ops);
 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 80d19c0eb78..8015f6f6548 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -483,7 +483,9 @@ static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
 	if (ide_allocate_dma_engine(hwif))
 		return -1;
 
-	ide_setup_dma(hwif, base);
+	hwif->dma_base = base;
+
+	hwif->dma_ops = &sff_dma_ops;
 
 	return 0;
 }
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index d2f470ec805..201e5ddae92 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1346,7 +1346,9 @@ static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
 	if (ide_allocate_dma_engine(hwif))
 		return -1;
 
-	ide_setup_dma(hwif, base);
+	hwif->dma_base = base;
+
+	hwif->dma_ops = &sff_dma_ops;
 
 	return 0;
 }
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index acb467c6f34..b047013f365 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -377,7 +377,9 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
 		if (ide_allocate_dma_engine(hwif))
 			return -1;
 
-		ide_setup_dma(hwif, base);
+		hwif->dma_base = base;
+
+		hwif->dma_ops = &sff_dma_ops;
 	}
 
 	return 0;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 85a32f472ef..6d774607e32 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1007,6 +1007,7 @@ void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
 int ide_pci_set_master(struct pci_dev *, const char *);
 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
+extern const struct ide_dma_ops sff_dma_ops;
 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
 #else
 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
@@ -1164,7 +1165,6 @@ void ide_destroy_dmatable(ide_drive_t *);
 extern int ide_build_dmatable(ide_drive_t *, struct request *);
 int ide_allocate_dma_engine(ide_hwif_t *);
 void ide_release_dma_engine(ide_hwif_t *);
-void ide_setup_dma(ide_hwif_t *, unsigned long);
 
 void ide_dma_host_set(ide_drive_t *, int);
 extern int ide_dma_setup(ide_drive_t *);
-- 
cgit v1.2.3


From ebb00fb55d0566bb3e81518122a57b4b3bedf1e4 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:51 +0200
Subject: ide: factor out simplex handling from ide_pci_dma_base()

* Factor out simplex handling from ide_pci_dma_base() to
  ide_pci_check_simplex().

* Set hwif->dma_base early in ->init_dma method / ide_hwif_setup_dma()
  and reset it in ide_init_port() if DMA initialization fails.

* Use ->read_sff_dma_status instead of ->INB in ide_pci_dma_base().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c    |  1 +
 drivers/ide/pci/alim15x3.c | 12 +++++++++---
 drivers/ide/pci/hpt366.c   | 12 +++++++++---
 drivers/ide/setup-pci.c    | 35 +++++++++++++++++++++++------------
 include/linux/ide.h        |  1 +
 5 files changed, 43 insertions(+), 18 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 9d8686a49fc..ec5f58c6f19 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1363,6 +1363,7 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
 
 		if (rc < 0) {
 			printk(KERN_INFO "%s: DMA disabled\n", hwif->name);
+			hwif->dma_base = 0;
 			hwif->swdma_mask = 0;
 			hwif->mwdma_mask = 0;
 			hwif->ultra_mask = 0;
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 8015f6f6548..5ef7817ac64 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -471,7 +471,15 @@ static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long base = ide_pci_dma_base(hwif, d);
 
-	if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
+	if (base == 0)
+		return -1;
+
+	hwif->dma_base = base;
+
+	if (ide_pci_check_simplex(hwif, d) < 0)
+		return -1;
+
+	if (ide_pci_set_master(dev, d->name) < 0)
 		return -1;
 
 	if (!hwif->channel)
@@ -483,8 +491,6 @@ static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
 	if (ide_allocate_dma_engine(hwif))
 		return -1;
 
-	hwif->dma_base = base;
-
 	hwif->dma_ops = &sff_dma_ops;
 
 	return 0;
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 201e5ddae92..e5651cefa39 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1320,7 +1320,15 @@ static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
 	unsigned long flags, base = ide_pci_dma_base(hwif, d);
 	u8 dma_old, dma_new, masterdma = 0, slavedma = 0;
 
-	if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
+	if (base == 0)
+		return -1;
+
+	hwif->dma_base = base;
+
+	if (ide_pci_check_simplex(hwif, d) < 0)
+		return -1;
+
+	if (ide_pci_set_master(dev, d->name) < 0)
 		return -1;
 
 	dma_old = inb(base + 2);
@@ -1346,8 +1354,6 @@ static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
 	if (ide_allocate_dma_engine(hwif))
 		return -1;
 
-	hwif->dma_base = base;
-
 	hwif->dma_ops = &sff_dma_ops;
 
 	return 0;
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index b047013f365..c1b609d9cb2 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -73,15 +73,12 @@ static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
  *	@d: IDE port info
  *
  *	Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
- *	Where a device has a partner that is already in DMA mode we check
- *	and enforce IDE simplex rules.
  */
 
 unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long dma_base = 0;
-	u8 dma_stat = 0;
 
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
 		return hwif->dma_base;
@@ -102,11 +99,19 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
 	if (hwif->channel)
 		dma_base += 8;
 
-	if (d->host_flags & IDE_HFLAG_CS5520)
+	return dma_base;
+}
+EXPORT_SYMBOL_GPL(ide_pci_dma_base);
+
+int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+	u8 dma_stat;
+
+	if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
 		goto out;
 
 	if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
-		ide_pci_clear_simplex(dma_base, d->name);
+		ide_pci_clear_simplex(hwif->dma_base, d->name);
 		goto out;
 	}
 
@@ -120,15 +125,15 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
 	 * we tune the drive then try to grab DMA ownership if we want to be
 	 * the DMA end.  This has to be become dynamic to handle hot-plug.
 	 */
-	dma_stat = hwif->INB(dma_base + 2);
+	dma_stat = hwif->read_sff_dma_status(hwif);
 	if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
 		printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
-		dma_base = 0;
+		return -1;
 	}
 out:
-	return dma_base;
+	return 0;
 }
-EXPORT_SYMBOL_GPL(ide_pci_dma_base);
+EXPORT_SYMBOL_GPL(ide_pci_check_simplex);
 
 /*
  * Set up BM-DMA capability (PnP BIOS should have done this)
@@ -363,7 +368,15 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
 	     (dev->class & 0x80))) {
 		unsigned long base = ide_pci_dma_base(hwif, d);
 
-		if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
+		if (base == 0)
+			return -1;
+
+		hwif->dma_base = base;
+
+		if (ide_pci_check_simplex(hwif, d) < 0)
+			return -1;
+
+		if (ide_pci_set_master(dev, d->name) < 0)
 			return -1;
 
 		if (hwif->host_flags & IDE_HFLAG_MMIO)
@@ -377,8 +390,6 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
 		if (ide_allocate_dma_engine(hwif))
 			return -1;
 
-		hwif->dma_base = base;
-
 		hwif->dma_ops = &sff_dma_ops;
 	}
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 6d774607e32..a179a7f6e44 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1008,6 +1008,7 @@ void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 int ide_pci_set_master(struct pci_dev *, const char *);
 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
 extern const struct ide_dma_ops sff_dma_ops;
+int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
 #else
 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
-- 
cgit v1.2.3


From c6dfa867bb45f4bff2e48f3bc89ab1d6a7ab4c21 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:51 +0200
Subject: ide: add ->exec_command method

Add ->exec_command method for writing ATA Command register
and use it instead of ->OUTBSYNC.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-io.c       |  3 +--
 drivers/ide/ide-iops.c     | 19 ++++++++++++++-----
 drivers/ide/ide-probe.c    |  6 +++---
 drivers/ide/ide-taskfile.c |  2 +-
 drivers/ide/pci/scc_pata.c |  9 +++++++++
 drivers/ide/ppc/pmac.c     |  9 +++++++++
 drivers/scsi/ide-scsi.c    |  3 +--
 include/linux/ide.h        |  3 ++-
 8 files changed, 40 insertions(+), 14 deletions(-)

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 661b75a89d4..ca0c04a919c 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -437,8 +437,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u
 
 	if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
 		/* force an abort */
-		hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE,
-			       hwif->io_ports.command_addr);
+		hwif->exec_command(hwif, WIN_IDLEIMMEDIATE);
 
 	if (rq->errors >= ERROR_MAX) {
 		ide_kill_rq(drive, rq);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 17cad6c39ee..d8db2558190 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -103,6 +103,14 @@ void SELECT_MASK(ide_drive_t *drive, int mask)
 		port_ops->maskproc(drive, mask);
 }
 
+static void ide_exec_command(ide_hwif_t *hwif, u8 cmd)
+{
+	if (hwif->host_flags & IDE_HFLAG_MMIO)
+		writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
+	else
+		outb(cmd, hwif->io_ports.command_addr);
+}
+
 static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
 {
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
@@ -331,6 +339,7 @@ static void ata_output_data(ide_drive_t *drive, struct request *rq,
 
 void default_hwif_transport(ide_hwif_t *hwif)
 {
+	hwif->exec_command	  = ide_exec_command;
 	hwif->read_sff_dma_status = ide_read_sff_dma_status;
 
 	hwif->tf_load	  = ide_tf_load;
@@ -696,7 +705,7 @@ int ide_driveid_update(ide_drive_t *drive)
 	SELECT_MASK(drive, 1);
 	ide_set_irq(drive, 0);
 	msleep(50);
-	hwif->OUTBSYNC(hwif, WIN_IDENTIFY, hwif->io_ports.command_addr);
+	hwif->exec_command(hwif, WIN_IDENTIFY);
 	timeout = jiffies + WAIT_WORSTCASE;
 	do {
 		if (time_after(jiffies, timeout)) {
@@ -783,7 +792,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 	ide_set_irq(drive, 0);
 	hwif->OUTB(speed, io_ports->nsect_addr);
 	hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
-	hwif->OUTBSYNC(hwif, WIN_SETFEATURES, io_ports->command_addr);
+	hwif->exec_command(hwif, WIN_SETFEATURES);
 	if (drive->quirk_list == 2)
 		ide_set_irq(drive, 1);
 
@@ -891,7 +900,7 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
 
 	spin_lock_irqsave(&ide_lock, flags);
 	__ide_set_handler(drive, handler, timeout, expiry);
-	hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr);
+	hwif->exec_command(hwif, cmd);
 	/*
 	 * Drive takes 400nS to respond, we must avoid the IRQ being
 	 * serviced before that.
@@ -909,7 +918,7 @@ void ide_execute_pkt_cmd(ide_drive_t *drive)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ide_lock, flags);
-	hwif->OUTBSYNC(hwif, WIN_PACKETCMD, hwif->io_ports.command_addr);
+	hwif->exec_command(hwif, WIN_PACKETCMD);
 	ndelay(400);
 	spin_unlock_irqrestore(&ide_lock, flags);
 }
@@ -1116,7 +1125,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
 		pre_reset(drive);
 		SELECT_DRIVE(drive);
 		udelay (20);
-		hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr);
+		hwif->exec_command(hwif, WIN_SRST);
 		ndelay(400);
 		hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
 		hwgroup->polling = 1;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index ec5f58c6f19..d1e834a1c5c 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -295,7 +295,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 		hwif->OUTB(0, io_ports->feature_addr);
 
 	/* ask drive for ID */
-	hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr);
+	hwif->exec_command(hwif, cmd);
 
 	timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
 	timeout += jiffies;
@@ -482,7 +482,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			msleep(50);
 			SELECT_DRIVE(drive);
 			msleep(50);
-			hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr);
+			hwif->exec_command(hwif, WIN_SRST);
 			(void)ide_busy_sleep(hwif);
 			rc = try_to_identify(drive, cmd);
 		}
@@ -518,7 +518,7 @@ static void enable_nest (ide_drive_t *drive)
 	printk("%s: enabling %s -- ", hwif->name, drive->id->model);
 	SELECT_DRIVE(drive);
 	msleep(50);
-	hwif->OUTBSYNC(hwif, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
+	hwif->exec_command(hwif, EXABYTE_ENABLE_NEST);
 
 	if (ide_busy_sleep(hwif)) {
 		printk(KERN_CONT "failed (timeout)\n");
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 1fbdb746dc8..c56be289417 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -88,7 +88,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
 	switch (task->data_phase) {
 	case TASKFILE_MULTI_OUT:
 	case TASKFILE_OUT:
-		hwif->OUTBSYNC(hwif, tf->command, hwif->io_ports.command_addr);
+		hwif->exec_command(hwif, tf->command);
 		ndelay(400);	/* FIXME */
 		return pre_task_out_intr(drive, task->rq);
 	case TASKFILE_MULTI_IN:
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index fc163a7772a..d140dfd565a 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -126,6 +126,14 @@ static u8 scc_ide_inb(unsigned long port)
 	return (u8)data;
 }
 
+static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
+{
+	out_be32((void *)hwif->io_ports.command_addr, cmd);
+	eieio();
+	in_be32((void *)(hwif->dma_base + 0x01c));
+	eieio();
+}
+
 static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
 {
 	return (u8)in_be32((void *)(hwif->dma_base + 4));
@@ -779,6 +787,7 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
 
 	ide_set_hwifdata(hwif, ports);
 
+	hwif->exec_command	  = scc_exec_command;
 	hwif->read_sff_dma_status = scc_read_sff_dma_status;
 
 	hwif->tf_load = scc_tf_load;
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index e68e33bb2c3..7c3a84f8fbe 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -495,6 +495,13 @@ static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
 				     + IDE_TIMING_CONFIG));
 }
 
+static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd)
+{
+	writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
+	(void)readl((void __iomem *)(hwif->io_ports.data_addr
+				     + IDE_TIMING_CONFIG));
+}
+
 /*
  * Old tuning functions (called on hdparm -p), sets up drive PIO timings
  */
@@ -1092,6 +1099,8 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	if (hwif == NULL)
 		return -ENOENT;
 
+	hwif->exec_command = pmac_exec_command;
+
 	/* Setup MMIO ops */
 	default_hwif_mmiops(hwif);
        	hwif->OUTBSYNC = pmac_outbsync;
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index f843c1383a4..80123890ced 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -248,8 +248,7 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
 
 	if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
 		/* force an abort */
-		hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE,
-			       hwif->io_ports.command_addr);
+		hwif->exec_command(hwif, WIN_IDLEIMMEDIATE);
 
 	rq->errors++;
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a179a7f6e44..d77c1994d0e 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -489,7 +489,8 @@ typedef struct hwif_s {
 	const struct ide_port_ops	*port_ops;
 	const struct ide_dma_ops	*dma_ops;
 
-	u8 (*read_sff_dma_status)(struct hwif_s *);
+	void	(*exec_command)(struct hwif_s *, u8);
+	u8	(*read_sff_dma_status)(struct hwif_s *);
 
 	void (*tf_load)(ide_drive_t *, struct ide_task_s *);
 	void (*tf_read)(ide_drive_t *, struct ide_task_s *);
-- 
cgit v1.2.3


From b73c7ee25da6133f97f47ffd3557288417da7c76 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:52 +0200
Subject: ide: add ->read_status method

* Remove ide_read_status() inline helper.

* Add ->read_status method for reading ATA Status register
  and use it instead of ->INB.

While at it:

* Don't use HWGROUP() macro.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/icside.c   |  4 +++-
 drivers/ide/ide-atapi.c    |  2 +-
 drivers/ide/ide-cd.c       | 12 ++++++++----
 drivers/ide/ide-dma.c      |  5 +++--
 drivers/ide/ide-floppy.c   |  3 ++-
 drivers/ide/ide-io.c       | 19 ++++++++++---------
 drivers/ide/ide-iops.c     | 33 ++++++++++++++++++++++-----------
 drivers/ide/ide-probe.c    | 22 +++++++++++-----------
 drivers/ide/ide-tape.c     |  6 ++++--
 drivers/ide/ide-taskfile.c | 23 ++++++++++++++---------
 drivers/ide/pci/ns87415.c  |  8 +++++++-
 drivers/ide/pci/scc_pata.c |  6 ++++++
 drivers/ide/pci/sgiioc4.c  | 19 ++++++++++---------
 drivers/scsi/ide-scsi.c    |  2 +-
 include/linux/ide.h        |  8 +-------
 15 files changed, 103 insertions(+), 69 deletions(-)

diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 850fe9342a1..f73422dd847 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -375,12 +375,14 @@ static int icside_dma_test_irq(ide_drive_t *drive)
 
 static void icside_dma_timeout(ide_drive_t *drive)
 {
+	ide_hwif_t *hwif = drive->hwif;
+
 	printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
 
 	if (icside_dma_test_irq(drive))
 		return;
 
-	ide_dump_status(drive, "DMA timeout", ide_read_status(drive));
+	ide_dump_status(drive, "DMA timeout", hwif->read_status(hwif));
 
 	icside_dma_end(drive);
 }
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 2802031de67..6554c4225a0 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -35,7 +35,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	}
 
 	/* Clear the interrupt */
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
 		if (hwif->dma_ops->dma_end(drive) ||
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 6e29dd53209..82879a1a89e 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -280,11 +280,12 @@ static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st)
  */
 static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
 {
-	struct request *rq = HWGROUP(drive)->rq;
+	ide_hwif_t *hwif = drive->hwif;
+	struct request *rq = hwif->hwgroup->rq;
 	int stat, err, sense_key;
 
 	/* check for errors */
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (stat_ret)
 		*stat_ret = stat;
@@ -606,6 +607,8 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
 static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
 				int len, int ireason, int rw)
 {
+	ide_hwif_t *hwif = drive->hwif;
+
 	/*
 	 * ireason == 0: the drive wants to receive data from us
 	 * ireason == 2: the drive is expecting to transfer data to us
@@ -624,7 +627,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
 		 * Some drives (ASUS) seem to tell us that status info is
 		 * available.  Just get it and ignore.
 		 */
-		(void)ide_read_status(drive);
+		(void)hwif->read_status(hwif);
 		return 0;
 	} else {
 		/* drive wants a command packet, or invalid ireason... */
@@ -1199,8 +1202,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 
 	if (blk_fs_request(rq)) {
 		if (info->cd_flags & IDE_CD_FLAG_SEEKING) {
+			ide_hwif_t *hwif = drive->hwif;
 			unsigned long elapsed = jiffies - info->start_seek;
-			int stat = ide_read_status(drive);
+			int stat = hwif->read_status(hwif);
 
 			if ((stat & SEEK_STAT) != SEEK_STAT) {
 				if (elapsed < IDECD_SEEK_TIMEOUT) {
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index ac342ebf6c5..ecf60dbbe3e 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -100,10 +100,11 @@ static const struct drive_list_entry drive_blacklist [] = {
  
 ide_startstop_t ide_dma_intr (ide_drive_t *drive)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	u8 stat = 0, dma_stat = 0;
 
-	dma_stat = drive->hwif->dma_ops->dma_end(drive);
-	stat = ide_read_status(drive);
+	dma_stat = hwif->dma_ops->dma_end(drive);
+	stat = hwif->read_status(hwif);
 
 	if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
 		if (!dma_stat) {
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 011d72011cc..6f5294cfff2 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -949,11 +949,12 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
 
 		/* Else assume format_unit has finished, and we're at 0x10000 */
 	} else {
+		ide_hwif_t *hwif = drive->hwif;
 		unsigned long flags;
 		u8 stat;
 
 		local_irq_save(flags);
-		stat = ide_read_status(drive);
+		stat = hwif->read_status(hwif);
 		local_irq_restore(flags);
 
 		progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index ca0c04a919c..fdc221ce992 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -381,8 +381,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
 		if (err == ABRT_ERR) {
 			if (drive->select.b.lba &&
 			    /* some newer drives don't support WIN_SPECIFY */
-			    hwif->INB(hwif->io_ports.command_addr) ==
-				WIN_SPECIFY)
+			    hwif->read_status(hwif) == WIN_SPECIFY)
 				return ide_stopped;
 		} else if ((err & BAD_CRC) == BAD_CRC) {
 			/* UDMA crc error, just retry the operation */
@@ -408,7 +407,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
 		return ide_stopped;
 	}
 
-	if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
+	if (hwif->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
 		rq->errors |= ERROR_RESET;
 
 	if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
@@ -435,7 +434,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u
 		/* add decoding error stuff */
 	}
 
-	if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
+	if (hwif->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
 		/* force an abort */
 		hwif->exec_command(hwif, WIN_IDLEIMMEDIATE);
 
@@ -711,7 +710,8 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
 #ifdef DEBUG
  	printk("%s: DRIVE_CMD (null)\n", drive->name);
 #endif
-	ide_end_drive_cmd(drive, ide_read_status(drive), ide_read_error(drive));
+	ide_end_drive_cmd(drive, hwif->read_status(hwif),
+			  ide_read_error(drive));
 
  	return ide_stopped;
 }
@@ -1141,7 +1141,7 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
 		printk(KERN_WARNING "%s: DMA timeout error\n", drive->name);
 		(void)hwif->dma_ops->dma_end(drive);
 		ret = ide_error(drive, "dma timeout error",
-				ide_read_status(drive));
+				hwif->read_status(hwif));
 	} else {
 		printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
 		hwif->dma_ops->dma_timeout(drive);
@@ -1266,7 +1266,7 @@ void ide_timer_expiry (unsigned long data)
 				} else
 					startstop =
 					ide_error(drive, "irq timeout",
-						  ide_read_status(drive));
+						  hwif->read_status(hwif));
 			}
 			drive->service_time = jiffies - drive->service_start;
 			spin_lock_irq(&ide_lock);
@@ -1322,7 +1322,8 @@ static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup)
 	 */
 	do {
 		if (hwif->irq == irq) {
-			stat = hwif->INB(hwif->io_ports.status_addr);
+			stat = hwif->read_status(hwif);
+
 			if (!OK_STAT(stat, READY_STAT, BAD_STAT)) {
 				/* Try to not flood the console with msgs */
 				static unsigned long last_msgtime, count;
@@ -1412,7 +1413,7 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 			 * Whack the status register, just in case
 			 * we have a leftover pending IRQ.
 			 */
-			(void) hwif->INB(hwif->io_ports.status_addr);
+			(void)hwif->read_status(hwif);
 #endif /* CONFIG_BLK_DEV_IDEPCI */
 		}
 		spin_unlock_irqrestore(&ide_lock, flags);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index d8db2558190..086eceaeeaf 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -111,6 +111,14 @@ static void ide_exec_command(ide_hwif_t *hwif, u8 cmd)
 		outb(cmd, hwif->io_ports.command_addr);
 }
 
+static u8 ide_read_status(ide_hwif_t *hwif)
+{
+	if (hwif->host_flags & IDE_HFLAG_MMIO)
+		return readb((void __iomem *)hwif->io_ports.status_addr);
+	else
+		return inb(hwif->io_ports.status_addr);
+}
+
 static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
 {
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
@@ -340,6 +348,7 @@ static void ata_output_data(ide_drive_t *drive, struct request *rq,
 void default_hwif_transport(ide_hwif_t *hwif)
 {
 	hwif->exec_command	  = ide_exec_command;
+	hwif->read_status	  = ide_read_status;
 	hwif->read_sff_dma_status = ide_read_sff_dma_status;
 
 	hwif->tf_load	  = ide_tf_load;
@@ -505,7 +514,7 @@ int drive_is_ready (ide_drive_t *drive)
 		stat = ide_read_altstatus(drive);
 	else
 		/* Note: this may clear a pending IRQ!! */
-		stat = ide_read_status(drive);
+		stat = hwif->read_status(hwif);
 
 	if (stat & BUSY_STAT)
 		/* drive busy:  definitely not interrupting */
@@ -530,24 +539,25 @@ EXPORT_SYMBOL(drive_is_ready);
  */
 static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	unsigned long flags;
 	int i;
 	u8 stat;
 
 	udelay(1);	/* spec allows drive 400ns to assert "BUSY" */
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (stat & BUSY_STAT) {
 		local_irq_set(flags);
 		timeout += jiffies;
-		while ((stat = ide_read_status(drive)) & BUSY_STAT) {
+		while ((stat = hwif->read_status(hwif)) & BUSY_STAT) {
 			if (time_after(jiffies, timeout)) {
 				/*
 				 * One last read after the timeout in case
 				 * heavy interrupt load made us not make any
 				 * progress during the timeout..
 				 */
-				stat = ide_read_status(drive);
+				stat = hwif->read_status(hwif);
 				if (!(stat & BUSY_STAT))
 					break;
 
@@ -567,7 +577,7 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti
 	 */
 	for (i = 0; i < 10; i++) {
 		udelay(1);
-		stat = ide_read_status(drive);
+		stat = hwif->read_status(hwif);
 
 		if (OK_STAT(stat, good, bad)) {
 			*rstat = stat;
@@ -718,7 +728,7 @@ int ide_driveid_update(ide_drive_t *drive)
 	} while (stat & BUSY_STAT);
 
 	msleep(50);	/* wait for IRQ and DRQ_STAT */
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
 		SELECT_MASK(drive, 0);
@@ -733,7 +743,7 @@ int ide_driveid_update(ide_drive_t *drive)
 		return 0;
 	}
 	hwif->input_data(drive, NULL, id, SECTOR_SIZE);
-	(void)ide_read_status(drive);	/* clear drive IRQ */
+	(void)hwif->read_status(hwif);	/* clear drive IRQ */
 	local_irq_enable();
 	local_irq_restore(flags);
 	ide_fix_driveid(id);
@@ -943,12 +953,13 @@ static ide_startstop_t do_reset1 (ide_drive_t *, int);
  */
 static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive)
 {
-	ide_hwgroup_t *hwgroup	= HWGROUP(drive);
+	ide_hwif_t *hwif = drive->hwif;
+	ide_hwgroup_t *hwgroup = hwif->hwgroup;
 	u8 stat;
 
 	SELECT_DRIVE(drive);
 	udelay (10);
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (OK_STAT(stat, 0, BUSY_STAT))
 		printk("%s: ATAPI reset complete\n", drive->name);
@@ -994,7 +1005,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
 		}
 	}
 
-	tmp = ide_read_status(drive);
+	tmp = hwif->read_status(hwif);
 
 	if (!OK_STAT(tmp, 0, BUSY_STAT)) {
 		if (time_before(jiffies, hwgroup->poll_timeout)) {
@@ -1208,7 +1219,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
 		 * about locking issues (2.5 work ?).
 		 */
 		mdelay(1);
-		stat = hwif->INB(hwif->io_ports.status_addr);
+		stat = hwif->read_status(hwif);
 		if ((stat & BUSY_STAT) == 0)
 			return 0;
 		/*
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index d1e834a1c5c..c42fcfedcbf 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -276,7 +276,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 
 	if (io_ports->ctl_addr) {
 		a = ide_read_altstatus(drive);
-		s = ide_read_status(drive);
+		s = hwif->read_status(hwif);
 		if ((a ^ s) & ~INDEX_STAT)
 			/* ancient Seagate drives, broken interfaces */
 			printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
@@ -307,12 +307,12 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 		/* give drive a breather */
 		msleep(50);
 		s = use_altstatus ? ide_read_altstatus(drive)
-				  : ide_read_status(drive);
+				  : hwif->read_status(hwif);
 	} while (s & BUSY_STAT);
 
 	/* wait for IRQ and DRQ_STAT */
 	msleep(50);
-	s = ide_read_status(drive);
+	s = hwif->read_status(hwif);
 
 	if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) {
 		unsigned long flags;
@@ -324,7 +324,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 		/* drive responded with ID */
 		rc = 0;
 		/* clear drive IRQ */
-		(void)ide_read_status(drive);
+		(void)hwif->read_status(hwif);
 		local_irq_restore(flags);
 	} else {
 		/* drive refused ID */
@@ -371,7 +371,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
 
 		ide_set_irq(drive, 0);
 		/* clear drive IRQ */
-		(void)ide_read_status(drive);
+		(void)hwif->read_status(hwif);
 		udelay(5);
 		irq = probe_irq_off(cookie);
 		if (!hwif->irq) {
@@ -396,7 +396,7 @@ static int ide_busy_sleep(ide_hwif_t *hwif)
 
 	do {
 		msleep(50);
-		stat = hwif->INB(hwif->io_ports.status_addr);
+		stat = hwif->read_status(hwif);
 		if ((stat & BUSY_STAT) == 0)
 			return 0;
 	} while (time_before(jiffies, timeout));
@@ -461,7 +461,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 		return 3;
 	}
 
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (OK_STAT(stat, READY_STAT, BUSY_STAT) ||
 	    drive->present || cmd == WIN_PIDENTIFY) {
@@ -471,7 +471,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			rc = try_to_identify(drive,cmd);
 		}
 
-		stat = ide_read_status(drive);
+		stat = hwif->read_status(hwif);
 
 		if (stat == (BUSY_STAT | READY_STAT))
 			return 4;
@@ -488,7 +488,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 		}
 
 		/* ensure drive IRQ is clear */
-		stat = ide_read_status(drive);
+		stat = hwif->read_status(hwif);
 
 		if (rc == 1)
 			printk(KERN_ERR "%s: no response (status = 0x%02x)\n",
@@ -502,7 +502,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 		SELECT_DRIVE(&hwif->drives[0]);
 		msleep(50);
 		/* ensure drive irq is clear */
-		(void)ide_read_status(drive);
+		(void)hwif->read_status(hwif);
 	}
 	return rc;
 }
@@ -527,7 +527,7 @@ static void enable_nest (ide_drive_t *drive)
 
 	msleep(50);
 
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (!OK_STAT(stat, 0, BAD_STAT))
 		printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 353dd11b928..ef54728a74b 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -927,11 +927,12 @@ static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
 
 static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc *pc = tape->pc;
 	u8 stat;
 
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (stat & SEEK_STAT) {
 		if (stat & ERR_STAT) {
@@ -980,6 +981,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 					  struct request *rq, sector_t block)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc *pc = NULL;
 	struct request *postponed_rq = tape->postponed_rq;
@@ -1017,7 +1019,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	 * If the tape is still busy, postpone our request and service
 	 * the other device meanwhile.
 	 */
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
 		set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index c56be289417..fc2b3957afa 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -124,7 +124,8 @@ EXPORT_SYMBOL_GPL(do_rw_taskfile);
  */
 static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
 {
-	u8 stat = ide_read_status(drive);
+	ide_hwif_t *hwif = drive->hwif;
+	u8 stat = hwif->read_status(hwif);
 
 	if (OK_STAT(stat, READY_STAT, BAD_STAT))
 		drive->mult_count = drive->mult_req;
@@ -141,10 +142,11 @@ static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
  */
 static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	int retries = 5;
 	u8 stat;
 
-	while (((stat = ide_read_status(drive)) & BUSY_STAT) && retries--)
+	while (((stat = hwif->read_status(hwif)) & BUSY_STAT) && retries--)
 		udelay(10);
 
 	if (OK_STAT(stat, READY_STAT, BAD_STAT))
@@ -162,7 +164,8 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
  */
 static ide_startstop_t recal_intr(ide_drive_t *drive)
 {
-	u8 stat = ide_read_status(drive);
+	ide_hwif_t *hwif = drive->hwif;
+	u8 stat = hwif->read_status(hwif);
 
 	if (!OK_STAT(stat, READY_STAT, BAD_STAT))
 		return ide_error(drive, "recal_intr", stat);
@@ -174,11 +177,12 @@ static ide_startstop_t recal_intr(ide_drive_t *drive)
  */
 static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
 {
-	ide_task_t *args	= HWGROUP(drive)->rq->special;
+	ide_hwif_t *hwif = drive->hwif;
+	ide_task_t *args = hwif->hwgroup->rq->special;
 	u8 stat;
 
 	local_irq_enable_in_hardirq();
-	stat = ide_read_status(drive);
+	stat = hwif->read_status(hwif);
 
 	if (!OK_STAT(stat, READY_STAT, BAD_STAT))
 		return ide_error(drive, "task_no_data_intr", stat);
@@ -192,6 +196,7 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
 
 static u8 wait_drive_not_busy(ide_drive_t *drive)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	int retries;
 	u8 stat;
 
@@ -200,7 +205,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
 	 * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
 	 */
 	for (retries = 0; retries < 1000; retries++) {
-		stat = ide_read_status(drive);
+		stat = hwif->read_status(hwif);
 
 		if (stat & BUSY_STAT)
 			udelay(10);
@@ -383,8 +388,8 @@ static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq
 static ide_startstop_t task_in_intr(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = HWGROUP(drive)->rq;
-	u8 stat = ide_read_status(drive);
+	struct request *rq = hwif->hwgroup->rq;
+	u8 stat = hwif->read_status(hwif);
 
 	/* Error? */
 	if (stat & ERR_STAT)
@@ -418,7 +423,7 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq = HWGROUP(drive)->rq;
-	u8 stat = ide_read_status(drive);
+	u8 stat = hwif->read_status(hwif);
 
 	if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat))
 		return task_error(drive, rq, __func__, stat);
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index 76ce112fd85..b20e5f01ac8 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -63,6 +63,11 @@ static u8 superio_ide_inb (unsigned long port)
 	return inb(port);
 }
 
+static u8 superio_read_status(ide_hwif_t *hwif)
+{
+	return superio_ide_inb(hwif->io_ports.status_addr);
+}
+
 static u8 superio_read_sff_dma_status(ide_hwif_t *hwif)
 {
 	return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
@@ -127,6 +132,7 @@ static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
 	tmp = superio_ide_inb(superio_ide_dma_status[port]);
 	outb(tmp | 0x66, superio_ide_dma_status[port]);
 
+	hwif->read_status	  = superio_read_status;
 	hwif->read_sff_dma_status = superio_read_sff_dma_status;
 
 	hwif->tf_read = superio_tf_read;
@@ -283,7 +289,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
 		outb(8, hwif->io_ports.ctl_addr);
 		do {
 			udelay(50);
-			stat = hwif->INB(hwif->io_ports.status_addr);
+			stat = hwif->read_status(hwif);
                 	if (stat == 0xff)
                         	break;
         	} while ((stat & BUSY_STAT) && --timeout);
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index d140dfd565a..3d72a5e03f3 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -134,6 +134,11 @@ static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
 	eieio();
 }
 
+static u8 scc_read_status(ide_hwif_t *hwif)
+{
+	return (u8)in_be32((void *)hwif->io_ports.status_addr);
+}
+
 static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
 {
 	return (u8)in_be32((void *)(hwif->dma_base + 4));
@@ -788,6 +793,7 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
 	ide_set_hwifdata(hwif, ports);
 
 	hwif->exec_command	  = scc_exec_command;
+	hwif->read_status	  = scc_read_status;
 	hwif->read_sff_dma_status = scc_read_sff_dma_status;
 
 	hwif->tf_load = scc_tf_load;
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 76afa1f9c59..3005a6334a5 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -127,7 +127,7 @@ sgiioc4_checkirq(ide_hwif_t * hwif)
 	return 0;
 }
 
-static u8 sgiioc4_INB(unsigned long);
+static u8 sgiioc4_read_status(ide_hwif_t *);
 
 static int
 sgiioc4_clearirq(ide_drive_t * drive)
@@ -141,18 +141,19 @@ sgiioc4_clearirq(ide_drive_t * drive)
 	intr_reg = readl((void __iomem *)other_ir);
 	if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
 		/*
-		 * Using sgiioc4_INB to read the Status register has a side
-		 * effect of clearing the interrupt.  The first read should
+		 * Using sgiioc4_read_status to read the Status register has a
+		 * side effect of clearing the interrupt.  The first read should
 		 * clear it if it is set.  The second read should return
 		 * a "clear" status if it got cleared.  If not, then spin
 		 * for a bit trying to clear it.
 		 */
-		u8 stat = sgiioc4_INB(io_ports->status_addr);
+		u8 stat = sgiioc4_read_status(hwif);
 		int count = 0;
-		stat = sgiioc4_INB(io_ports->status_addr);
+
+		stat = sgiioc4_read_status(hwif);
 		while ((stat & 0x80) && (count++ < 100)) {
 			udelay(1);
-			stat = sgiioc4_INB(io_ports->status_addr);
+			stat = sgiioc4_read_status(hwif);
 		}
 
 		if (intr_reg & 0x02) {
@@ -304,9 +305,9 @@ sgiioc4_dma_lost_irq(ide_drive_t * drive)
 	ide_dma_lost_irq(drive);
 }
 
-static u8
-sgiioc4_INB(unsigned long port)
+static u8 sgiioc4_read_status(ide_hwif_t *hwif)
 {
+	unsigned long port = hwif->io_ports.status_addr;
 	u8 reg = (u8) readb((void __iomem *) port);
 
 	if ((port & 0xFFF) == 0x11C) {	/* Status register of IOC4 */
@@ -628,7 +629,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	hwif->INB = &sgiioc4_INB;
+	hwif->read_status = sgiioc4_read_status;
 
 	idx[0] = hwif->index;
 
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 80123890ced..2a86af91f64 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -246,7 +246,7 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
 {
 	ide_hwif_t *hwif = drive->hwif;
 
-	if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
+	if (hwif->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
 		/* force an abort */
 		hwif->exec_command(hwif, WIN_IDLEIMMEDIATE);
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index d77c1994d0e..a23ae25d7da 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -490,6 +490,7 @@ typedef struct hwif_s {
 	const struct ide_dma_ops	*dma_ops;
 
 	void	(*exec_command)(struct hwif_s *, u8);
+	u8	(*read_status)(struct hwif_s *);
 	u8	(*read_sff_dma_status)(struct hwif_s *);
 
 	void (*tf_load)(ide_drive_t *, struct ide_task_s *);
@@ -1362,13 +1363,6 @@ static inline void ide_set_irq(ide_drive_t *drive, int on)
 		       hwif->io_ports.ctl_addr);
 }
 
-static inline u8 ide_read_status(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	return hwif->INB(hwif->io_ports.status_addr);
-}
-
 static inline u8 ide_read_altstatus(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-- 
cgit v1.2.3


From 1f6d8a0fd8f6cc5ee2219a8cf9b2da16dfd67397 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:52 +0200
Subject: ide: add ->read_altstatus method

* Remove ide_read_altstatus() inline helper.

* Add ->read_altstatus method for reading ATA Alternate Status
  register and use it instead of ->INB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-iops.c     | 13 +++++++++++--
 drivers/ide/ide-probe.c    |  4 ++--
 drivers/ide/pci/scc_pata.c |  6 ++++++
 include/linux/ide.h        |  8 +-------
 4 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 086eceaeeaf..e106954e13f 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -119,6 +119,14 @@ static u8 ide_read_status(ide_hwif_t *hwif)
 		return inb(hwif->io_ports.status_addr);
 }
 
+static u8 ide_read_altstatus(ide_hwif_t *hwif)
+{
+	if (hwif->host_flags & IDE_HFLAG_MMIO)
+		return readb((void __iomem *)hwif->io_ports.ctl_addr);
+	else
+		return inb(hwif->io_ports.ctl_addr);
+}
+
 static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
 {
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
@@ -349,6 +357,7 @@ void default_hwif_transport(ide_hwif_t *hwif)
 {
 	hwif->exec_command	  = ide_exec_command;
 	hwif->read_status	  = ide_read_status;
+	hwif->read_altstatus	  = ide_read_altstatus;
 	hwif->read_sff_dma_status = ide_read_sff_dma_status;
 
 	hwif->tf_load	  = ide_tf_load;
@@ -511,7 +520,7 @@ int drive_is_ready (ide_drive_t *drive)
 	 * about possible isa-pnp and pci-pnp issues yet.
 	 */
 	if (hwif->io_ports.ctl_addr)
-		stat = ide_read_altstatus(drive);
+		stat = hwif->read_altstatus(hwif);
 	else
 		/* Note: this may clear a pending IRQ!! */
 		stat = hwif->read_status(hwif);
@@ -724,7 +733,7 @@ int ide_driveid_update(ide_drive_t *drive)
 		}
 
 		msleep(50);	/* give drive a breather */
-		stat = ide_read_altstatus(drive);
+		stat = hwif->read_altstatus(hwif);
 	} while (stat & BUSY_STAT);
 
 	msleep(50);	/* wait for IRQ and DRQ_STAT */
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index c42fcfedcbf..fe14d576ef0 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -275,7 +275,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 	msleep(50);
 
 	if (io_ports->ctl_addr) {
-		a = ide_read_altstatus(drive);
+		a = hwif->read_altstatus(hwif);
 		s = hwif->read_status(hwif);
 		if ((a ^ s) & ~INDEX_STAT)
 			/* ancient Seagate drives, broken interfaces */
@@ -306,7 +306,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 		}
 		/* give drive a breather */
 		msleep(50);
-		s = use_altstatus ? ide_read_altstatus(drive)
+		s = use_altstatus ? hwif->read_altstatus(hwif)
 				  : hwif->read_status(hwif);
 	} while (s & BUSY_STAT);
 
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 3d72a5e03f3..a89dc478078 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -139,6 +139,11 @@ static u8 scc_read_status(ide_hwif_t *hwif)
 	return (u8)in_be32((void *)hwif->io_ports.status_addr);
 }
 
+static u8 scc_read_altstatus(ide_hwif_t *hwif)
+{
+	return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
+}
+
 static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
 {
 	return (u8)in_be32((void *)(hwif->dma_base + 4));
@@ -794,6 +799,7 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
 
 	hwif->exec_command	  = scc_exec_command;
 	hwif->read_status	  = scc_read_status;
+	hwif->read_altstatus	  = scc_read_altstatus;
 	hwif->read_sff_dma_status = scc_read_sff_dma_status;
 
 	hwif->tf_load = scc_tf_load;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a23ae25d7da..e5fa5e868d6 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -491,6 +491,7 @@ typedef struct hwif_s {
 
 	void	(*exec_command)(struct hwif_s *, u8);
 	u8	(*read_status)(struct hwif_s *);
+	u8	(*read_altstatus)(struct hwif_s *);
 	u8	(*read_sff_dma_status)(struct hwif_s *);
 
 	void (*tf_load)(ide_drive_t *, struct ide_task_s *);
@@ -1363,13 +1364,6 @@ static inline void ide_set_irq(ide_drive_t *drive, int on)
 		       hwif->io_ports.ctl_addr);
 }
 
-static inline u8 ide_read_altstatus(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	return hwif->INB(hwif->io_ports.ctl_addr);
-}
-
 static inline u8 ide_read_error(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-- 
cgit v1.2.3


From 6e6afb3b7401f0181da74a1add57f126946b43e6 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:52 +0200
Subject: ide: add ->set_irq method

Add ->set_irq method for setting nIEN bit of ATA Device Control
register and use it instead of ide_set_irq().

While at it:

* Use ->set_irq in init_irq() and do_reset1().

* Don't use HWIF() macro in ide_check_pm_state().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-io.c       | 14 ++++++++------
 drivers/ide/ide-iops.c     | 37 +++++++++++++++++++++++++++----------
 drivers/ide/ide-probe.c    |  9 ++++-----
 drivers/ide/ide-taskfile.c |  2 +-
 drivers/ide/pci/scc_pata.c | 19 +++++++++++++++++++
 drivers/ide/ppc/pmac.c     | 17 +++++++++++++++++
 include/linux/ide.h        | 10 ++--------
 7 files changed, 78 insertions(+), 30 deletions(-)

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index fdc221ce992..bbd7bd4c48e 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -746,16 +746,17 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 		 * the bus may be broken enough to walk on our toes at this
 		 * point.
 		 */
+		ide_hwif_t *hwif = drive->hwif;
 		int rc;
 #ifdef DEBUG_PM
 		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
 #endif
-		rc = ide_wait_not_busy(HWIF(drive), 35000);
+		rc = ide_wait_not_busy(hwif, 35000);
 		if (rc)
 			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
 		SELECT_DRIVE(drive);
-		ide_set_irq(drive, 1);
-		rc = ide_wait_not_busy(HWIF(drive), 100000);
+		hwif->set_irq(hwif, 1);
+		rc = ide_wait_not_busy(hwif, 100000);
 		if (rc)
 			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
 	}
@@ -1041,7 +1042,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 			 * quirk_list may not like intr setups/cleanups
 			 */
 			if (drive->quirk_list != 1)
-				ide_set_irq(drive, 0);
+				hwif->set_irq(hwif, 0);
 		}
 		hwgroup->hwif = hwif;
 		hwgroup->drive = drive;
@@ -1519,6 +1520,7 @@ EXPORT_SYMBOL(ide_do_drive_cmd);
 
 void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	ide_task_t task;
 
 	memset(&task, 0, sizeof(task));
@@ -1529,9 +1531,9 @@ void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
 	task.tf.lbah    = (bcount >> 8) & 0xff;
 
 	ide_tf_dump(drive->name, &task.tf);
-	ide_set_irq(drive, 1);
+	hwif->set_irq(hwif, 1);
 	SELECT_MASK(drive, 0);
-	drive->hwif->tf_load(drive, &task);
+	hwif->tf_load(drive, &task);
 }
 
 EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index e106954e13f..41ec53f329f 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -135,6 +135,23 @@ static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
 		return inb(hwif->dma_base + ATA_DMA_STATUS);
 }
 
+static void ide_set_irq(ide_hwif_t *hwif, int on)
+{
+	u8 ctl = ATA_DEVCTL_OBS;
+
+	if (on == 4) { /* hack for SRST */
+		ctl |= 4;
+		on &= ~4;
+	}
+
+	ctl |= on ? 0 : 2;
+
+	if (hwif->host_flags & IDE_HFLAG_MMIO)
+		writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
+	else
+		outb(ctl, hwif->io_ports.ctl_addr);
+}
+
 static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -360,6 +377,8 @@ void default_hwif_transport(ide_hwif_t *hwif)
 	hwif->read_altstatus	  = ide_read_altstatus;
 	hwif->read_sff_dma_status = ide_read_sff_dma_status;
 
+	hwif->set_irq	  = ide_set_irq;
+
 	hwif->tf_load	  = ide_tf_load;
 	hwif->tf_read	  = ide_tf_read;
 
@@ -722,7 +741,7 @@ int ide_driveid_update(ide_drive_t *drive)
 	 */
 
 	SELECT_MASK(drive, 1);
-	ide_set_irq(drive, 0);
+	hwif->set_irq(hwif, 0);
 	msleep(50);
 	hwif->exec_command(hwif, WIN_IDENTIFY);
 	timeout = jiffies + WAIT_WORSTCASE;
@@ -808,12 +827,12 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 	SELECT_DRIVE(drive);
 	SELECT_MASK(drive, 0);
 	udelay(1);
-	ide_set_irq(drive, 0);
+	hwif->set_irq(hwif, 0);
 	hwif->OUTB(speed, io_ports->nsect_addr);
 	hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
 	hwif->exec_command(hwif, WIN_SETFEATURES);
 	if (drive->quirk_list == 2)
-		ide_set_irq(drive, 1);
+		hwif->set_irq(hwif, 1);
 
 	error = __ide_wait_stat(drive, drive->ready_stat,
 				BUSY_STAT|DRQ_STAT|ERR_STAT,
@@ -1129,7 +1148,6 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
 	ide_hwgroup_t *hwgroup;
 	struct ide_io_ports *io_ports;
 	const struct ide_port_ops *port_ops;
-	u8 ctl;
 
 	spin_lock_irqsave(&ide_lock, flags);
 	hwif = HWIF(drive);
@@ -1174,16 +1192,15 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
 	 * immediate interrupt due to the edge transition it produces.
 	 * This single interrupt gives us a "fast poll" for drives that
 	 * recover from reset very quickly, saving us the first 50ms wait time.
+	 *
+	 * TODO: add ->softreset method and stop abusing ->set_irq
 	 */
 	/* set SRST and nIEN */
-	hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | 6, io_ports->ctl_addr);
+	hwif->set_irq(hwif, 4);
 	/* more than enough time */
 	udelay(10);
-	if (drive->quirk_list == 2)
-		ctl = ATA_DEVCTL_OBS;		/* clear SRST and nIEN */
-	else
-		ctl = ATA_DEVCTL_OBS | 2;	/* clear SRST, leave nIEN */
-	hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr);
+	/* clear SRST, leave nIEN (unless device is on the quirk list) */
+	hwif->set_irq(hwif, drive->quirk_list == 2);
 	/* more than enough time */
 	udelay(10);
 	hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index fe14d576ef0..475bd726318 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -361,7 +361,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
 			autoprobe = 1;
 			cookie = probe_irq_on();
 		}
-		ide_set_irq(drive, autoprobe);
+		hwif->set_irq(hwif, autoprobe);
 	}
 
 	retval = actual_try_to_identify(drive, cmd);
@@ -369,7 +369,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
 	if (autoprobe) {
 		int irq;
 
-		ide_set_irq(drive, 0);
+		hwif->set_irq(hwif, 0);
 		/* clear drive IRQ */
 		(void)hwif->read_status(hwif);
 		udelay(5);
@@ -709,7 +709,7 @@ static int ide_port_wait_ready(ide_hwif_t *hwif)
 		/* Ignore disks that we will not probe for later. */
 		if (!drive->noprobe || drive->present) {
 			SELECT_DRIVE(drive);
-			ide_set_irq(drive, 1);
+			hwif->set_irq(hwif, 1);
 			mdelay(2);
 			rc = ide_wait_not_busy(hwif, 35000);
 			if (rc)
@@ -1066,8 +1066,7 @@ static int init_irq (ide_hwif_t *hwif)
 			sa = IRQF_SHARED;
 
 		if (io_ports->ctl_addr)
-			/* clear nIEN */
-			hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS, io_ports->ctl_addr);
+			hwif->set_irq(hwif, 1);
 
 		if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup))
 	       		goto out_unlink;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index fc2b3957afa..ea345369553 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -80,7 +80,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
 
 	if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
 		ide_tf_dump(drive->name, tf);
-		ide_set_irq(drive, 1);
+		hwif->set_irq(hwif, 1);
 		SELECT_MASK(drive, 0);
 		hwif->tf_load(drive, task);
 	}
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index a89dc478078..727eda6db76 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -149,6 +149,23 @@ static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
 	return (u8)in_be32((void *)(hwif->dma_base + 4));
 }
 
+static void scc_set_irq(ide_hwif_t *hwif, int on)
+{
+	u8 ctl = ATA_DEVCTL_OBS;
+
+	if (on == 4) { /* hack for SRST */
+		ctl |= 4;
+		on &= ~4;
+	}
+
+	ctl |= on ? 0 : 2;
+
+	out_be32((void *)hwif->io_ports.ctl_addr, ctl);
+	eieio();
+	in_be32((void *)(hwif->dma_base + 0x01c));
+	eieio();
+}
+
 static void scc_ide_insw(unsigned long port, void *addr, u32 count)
 {
 	u16 *ptr = (u16 *)addr;
@@ -802,6 +819,8 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
 	hwif->read_altstatus	  = scc_read_altstatus;
 	hwif->read_sff_dma_status = scc_read_sff_dma_status;
 
+	hwif->set_irq = scc_set_irq;
+
 	hwif->tf_load = scc_tf_load;
 	hwif->tf_read = scc_tf_read;
 
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 7c3a84f8fbe..a0d66480a79 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -502,6 +502,22 @@ static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd)
 				     + IDE_TIMING_CONFIG));
 }
 
+static void pmac_set_irq(ide_hwif_t *hwif, int on)
+{
+	u8 ctl = ATA_DEVCTL_OBS;
+
+	if (on == 4) { /* hack for SRST */
+		ctl |= 4;
+		on &= ~4;
+	}
+
+	ctl |= on ? 0 : 2;
+
+	writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
+	(void)readl((void __iomem *)(hwif->io_ports.data_addr
+				     + IDE_TIMING_CONFIG));
+}
+
 /*
  * Old tuning functions (called on hdparm -p), sets up drive PIO timings
  */
@@ -1100,6 +1116,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 		return -ENOENT;
 
 	hwif->exec_command = pmac_exec_command;
+	hwif->set_irq	   = pmac_set_irq;
 
 	/* Setup MMIO ops */
 	default_hwif_mmiops(hwif);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e5fa5e868d6..ae93f89e444 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -494,6 +494,8 @@ typedef struct hwif_s {
 	u8	(*read_altstatus)(struct hwif_s *);
 	u8	(*read_sff_dma_status)(struct hwif_s *);
 
+	void	(*set_irq)(struct hwif_s *, int);
+
 	void (*tf_load)(ide_drive_t *, struct ide_task_s *);
 	void (*tf_read)(ide_drive_t *, struct ide_task_s *);
 
@@ -1356,14 +1358,6 @@ static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
 	return &hwif->drives[(drive->dn ^ 1) & 1];
 }
 
-static inline void ide_set_irq(ide_drive_t *drive, int on)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | (on ? 0 : 2),
-		       hwif->io_ports.ctl_addr);
-}
-
 static inline u8 ide_read_error(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-- 
cgit v1.2.3


From 3c09384e95fa4048a06f179849901f3e57266d58 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:52 +0200
Subject: ide: change order of register access in ide_config_drive_speed()

Write ATA Feature register before ATA Sector Count register as
a preparation to use ->tf_load in ide_config_drive_speed().

This change shouldn't affect anything (just an usual paranoia).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-iops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 41ec53f329f..0a3a5068f04 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -828,8 +828,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 	SELECT_MASK(drive, 0);
 	udelay(1);
 	hwif->set_irq(hwif, 0);
-	hwif->OUTB(speed, io_ports->nsect_addr);
 	hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
+	hwif->OUTB(speed, io_ports->nsect_addr);
 	hwif->exec_command(hwif, WIN_SETFEATURES);
 	if (drive->quirk_list == 2)
 		hwif->set_irq(hwif, 1);
-- 
cgit v1.2.3


From 59be2c80f0c1080634006135aa9130f1736fbfba Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:52 +0200
Subject: ide: use ->tf_load in ide_config_drive_speed()

Convert ide_config_drive_speed() to use ->tf_load instead of ->OUTB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-iops.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 0a3a5068f04..a15f1e1cb97 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -792,9 +792,9 @@ int ide_driveid_update(ide_drive_t *drive)
 int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct ide_io_ports *io_ports = &hwif->io_ports;
 	int error = 0;
 	u8 stat;
+	ide_task_t task;
 
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	if (hwif->dma_ops)	/* check if host supports DMA */
@@ -828,9 +828,16 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 	SELECT_MASK(drive, 0);
 	udelay(1);
 	hwif->set_irq(hwif, 0);
-	hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
-	hwif->OUTB(speed, io_ports->nsect_addr);
+
+	memset(&task, 0, sizeof(task));
+	task.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT;
+	task.tf.feature = SETFEATURES_XFER;
+	task.tf.nsect   = speed;
+
+	hwif->tf_load(drive, &task);
+
 	hwif->exec_command(hwif, WIN_SETFEATURES);
+
 	if (drive->quirk_list == 2)
 		hwif->set_irq(hwif, 1);
 
-- 
cgit v1.2.3


From 4e65837b293f3ee6399006e94120d61430f72f26 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:53 +0200
Subject: ide: use ->tf_load in actual_try_to_identify()

Convert actual_try_to_identify() to use ->tf_load instead of ->OUTB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 475bd726318..970464317bd 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -290,9 +290,15 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 	/* set features register for atapi
 	 * identify command to be sure of reply
 	 */
-	if ((cmd == WIN_PIDENTIFY))
-		/* disable dma & overlap */
-		hwif->OUTB(0, io_ports->feature_addr);
+	if (cmd == WIN_PIDENTIFY) {
+		ide_task_t task;
+
+		memset(&task, 0, sizeof(task));
+		/* disable DMA & overlap */
+		task.tf_flags = IDE_TFLAG_OUT_FEATURE;
+
+		drive->hwif->tf_load(drive, &task);
+	}
 
 	/* ask drive for ID */
 	hwif->exec_command(hwif, cmd);
-- 
cgit v1.2.3


From 40f095f0138ea5b5971e5128b27e1bb907161149 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:53 +0200
Subject: ide: use ->tf_load in SELECT_DRIVE()

Convert SELECT_DRIVE() to use ->tf_load instead of ->OUTB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-iops.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index a15f1e1cb97..1983b353eb1 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -88,11 +88,15 @@ void SELECT_DRIVE (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	const struct ide_port_ops *port_ops = hwif->port_ops;
+	ide_task_t task;
 
 	if (port_ops && port_ops->selectproc)
 		port_ops->selectproc(drive);
 
-	hwif->OUTB(drive->select.all, hwif->io_ports.device_addr);
+	memset(&task, 0, sizeof(task));
+	task.tf_flags = IDE_TFLAG_OUT_DEVICE;
+
+	drive->hwif->tf_load(drive, &task);
 }
 
 void SELECT_MASK(ide_drive_t *drive, int mask)
-- 
cgit v1.2.3


From 92eb43800a3c1300bd5cb8a2a27e6f2a84f7042e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:53 +0200
Subject: ide: use ->tf_read in ide_read_error()

* Add IDE_TFLAG_IN_FEATURE taskfile flag for reading Feature
  register and handle it in ->tf_read.

* Convert ide_read_error() to use ->tf_read instead of ->INB,
  then uninline and export it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/h8300/ide-h8300.c |  2 ++
 drivers/ide/ide-iops.c        | 15 +++++++++++++++
 drivers/ide/pci/ns87415.c     |  2 ++
 drivers/ide/pci/scc_pata.c    |  2 ++
 include/linux/ide.h           | 10 +++-------
 5 files changed, 24 insertions(+), 7 deletions(-)

diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index a71433b3d0f..548a2bf232c 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -100,6 +100,8 @@ static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task)
 	/* be sure we're looking at the low order bits */
 	outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
 
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = inb(io_ports->feature_addr);
 	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
 		tf->nsect  = inb(io_ports->nsect_addr);
 	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 1983b353eb1..113db874473 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -241,6 +241,8 @@ static void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
 	/* be sure we're looking at the low order bits */
 	tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
 
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = tf_inb(io_ports->feature_addr);
 	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
 		tf->nsect  = tf_inb(io_ports->nsect_addr);
 	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
@@ -390,6 +392,19 @@ void default_hwif_transport(ide_hwif_t *hwif)
 	hwif->output_data = ata_output_data;
 }
 
+u8 ide_read_error(ide_drive_t *drive)
+{
+	ide_task_t task;
+
+	memset(&task, 0, sizeof(task));
+	task.tf_flags = IDE_TFLAG_IN_FEATURE;
+
+	drive->hwif->tf_read(drive, &task);
+
+	return task.tf.error;
+}
+EXPORT_SYMBOL_GPL(ide_read_error);
+
 void ide_fix_driveid (struct hd_driveid *id)
 {
 #ifndef __LITTLE_ENDIAN
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index b20e5f01ac8..b9bb8428b35 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -88,6 +88,8 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
 	/* be sure we're looking at the low order bits */
 	outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
 
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = inb(io_ports->feature_addr);
 	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
 		tf->nsect  = inb(io_ports->nsect_addr);
 	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 727eda6db76..c110f359b03 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -741,6 +741,8 @@ static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
 	/* be sure we're looking at the low order bits */
 	scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
 
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = scc_ide_inb(io_ports->feature_addr);
 	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
 		tf->nsect  = scc_ide_inb(io_ports->nsect_addr);
 	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index ae93f89e444..7890768d03e 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -889,6 +889,7 @@ enum {
 	IDE_TFLAG_IN_HOB		= IDE_TFLAG_IN_HOB_FEATURE |
 					  IDE_TFLAG_IN_HOB_NSECT |
 					  IDE_TFLAG_IN_HOB_LBA,
+	IDE_TFLAG_IN_FEATURE		= (1 << 1),
 	IDE_TFLAG_IN_NSECT		= (1 << 25),
 	IDE_TFLAG_IN_LBAL		= (1 << 26),
 	IDE_TFLAG_IN_LBAM		= (1 << 27),
@@ -956,6 +957,8 @@ void ide_tf_dump(const char *, struct ide_taskfile *);
 extern void SELECT_DRIVE(ide_drive_t *);
 void SELECT_MASK(ide_drive_t *, int);
 
+u8 ide_read_error(ide_drive_t *);
+
 extern int drive_is_ready(ide_drive_t *);
 
 void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
@@ -1357,11 +1360,4 @@ static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
 
 	return &hwif->drives[(drive->dn ^ 1) & 1];
 }
-
-static inline u8 ide_read_error(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	return hwif->INB(hwif->io_ports.error_addr);
-}
 #endif /* _IDE_H */
-- 
cgit v1.2.3


From 1f2efb82af3cfbac995f590a8f8d3beb6fa5678b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:54 +0200
Subject: ide: add ide_read_device() helper

Add ide_read_device() helper and convert do_probe() to use it
instead of ->INB.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 970464317bd..21cea45e9f2 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -410,6 +410,18 @@ static int ide_busy_sleep(ide_hwif_t *hwif)
 	return 1;
 }
 
+static u8 ide_read_device(ide_drive_t *drive)
+{
+	ide_task_t task;
+
+	memset(&task, 0, sizeof(task));
+	task.tf_flags = IDE_TFLAG_IN_DEVICE;
+
+	drive->hwif->tf_read(drive, &task);
+
+	return task.tf.device;
+}
+
 /**
  *	do_probe		-	probe an IDE device
  *	@drive: drive to probe
@@ -434,7 +446,6 @@ static int ide_busy_sleep(ide_hwif_t *hwif)
 static int do_probe (ide_drive_t *drive, u8 cmd)
 {
 	ide_hwif_t *hwif = HWIF(drive);
-	struct ide_io_ports *io_ports = &hwif->io_ports;
 	int rc;
 	u8 stat;
 
@@ -455,8 +466,8 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 	msleep(50);
 	SELECT_DRIVE(drive);
 	msleep(50);
-	if (hwif->INB(io_ports->device_addr) != drive->select.all &&
-	    !drive->present) {
+
+	if (ide_read_device(drive) != drive->select.all && !drive->present) {
 		if (drive->select.b.unit != 0) {
 			/* exit with drive0 selected */
 			SELECT_DRIVE(&hwif->drives[0]);
-- 
cgit v1.2.3


From 88a72109b2256bf2974f324a8f890b4a06faf7e9 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:54 +0200
Subject: ide: add ide_read_ireason() helper

Add ide_read_ireason() helper and use instead of ->INB for reading
ATAPI Interrupt Reason register.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-atapi.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 6554c4225a0..bfab5c4afc6 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -183,16 +183,27 @@ cmd_finished:
 }
 EXPORT_SYMBOL_GPL(ide_pc_intr);
 
+static u8 ide_read_ireason(ide_drive_t *drive)
+{
+	ide_task_t task;
+
+	memset(&task, 0, sizeof(task));
+	task.tf_flags = IDE_TFLAG_IN_NSECT;
+
+	drive->hwif->tf_read(drive, &task);
+
+	return task.tf.nsect & 3;
+}
+
 static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
 {
-	ide_hwif_t *hwif = drive->hwif;
 	int retries = 100;
 
 	while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
 		printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
 				"a packet command, retrying\n", drive->name);
 		udelay(100);
-		ireason = hwif->INB(hwif->io_ports.nsect_addr);
+		ireason = ide_read_ireason(drive);
 		if (retries == 0) {
 			printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
 					"a packet command, ignoring\n",
@@ -219,7 +230,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
 		return startstop;
 	}
 
-	ireason = hwif->INB(hwif->io_ports.nsect_addr);
+	ireason = ide_read_ireason(drive);
 	if (drive->media == ide_tape && !drive->scsi)
 		ireason = ide_wait_ireason(drive, ireason);
 
-- 
cgit v1.2.3


From 1823649b5abb77ffe638178bc5253249d3ecd17d Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:54 +0200
Subject: ide: add ide_read_bcount_and_ireason() helper

Add ide_read_bcount_and_ireason() helper and use it instead of ->INB
in {cdrom_newpc,ide_pc}_intr().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-atapi.c |  6 ++----
 drivers/ide/ide-cd.c    | 12 ++++--------
 drivers/ide/ide-iops.c  | 15 +++++++++++++++
 include/linux/ide.h     |  1 +
 4 files changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index bfab5c4afc6..f17a00ccbe9 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -107,11 +107,9 @@ cmd_finished:
 		ide_dma_off(drive);
 		return ide_do_reset(drive);
 	}
-	/* Get the number of bytes to transfer on this interrupt. */
-	bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
-		  hwif->INB(hwif->io_ports.lbam_addr);
 
-	ireason = hwif->INB(hwif->io_ports.nsect_addr);
+	/* Get the number of bytes to transfer on this interrupt. */
+	ide_read_bcount_and_ireason(drive, &bcount, &ireason);
 
 	if (ireason & CD) {
 		printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 82879a1a89e..563a380d0e7 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -895,10 +895,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 	struct request *rq = HWGROUP(drive)->rq;
 	xfer_func_t *xferfunc;
 	ide_expiry_t *expiry = NULL;
-	int dma_error = 0, dma, stat, ireason, len, thislen, uptodate = 0;
+	int dma_error = 0, dma, stat, thislen, uptodate = 0;
 	int write = (rq_data_dir(rq) == WRITE) ? 1 : 0;
 	unsigned int timeout;
-	u8 lowcyl, highcyl;
+	u16 len;
+	u8 ireason;
 
 	/* check for errors */
 	dma = info->dma;
@@ -926,12 +927,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 		goto end_request;
 	}
 
-	/* ok we fall to pio :/ */
-	ireason = hwif->INB(hwif->io_ports.nsect_addr) & 0x3;
-	lowcyl  = hwif->INB(hwif->io_ports.lbam_addr);
-	highcyl = hwif->INB(hwif->io_ports.lbah_addr);
-
-	len = lowcyl + (256 * highcyl);
+	ide_read_bcount_and_ireason(drive, &len, &ireason);
 
 	thislen = blk_fs_request(rq) ? len : rq->data_len;
 	if (thislen > len)
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 113db874473..cb11c7861a5 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -405,6 +405,21 @@ u8 ide_read_error(ide_drive_t *drive)
 }
 EXPORT_SYMBOL_GPL(ide_read_error);
 
+void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
+{
+	ide_task_t task;
+
+	memset(&task, 0, sizeof(task));
+	task.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM |
+			IDE_TFLAG_IN_NSECT;
+
+	drive->hwif->tf_read(drive, &task);
+
+	*bcount = (task.tf.lbah << 8) | task.tf.lbam;
+	*ireason = task.tf.nsect & 3;
+}
+EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);
+
 void ide_fix_driveid (struct hd_driveid *id)
 {
 #ifndef __LITTLE_ENDIAN
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 7890768d03e..fd05758e699 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -958,6 +958,7 @@ extern void SELECT_DRIVE(ide_drive_t *);
 void SELECT_MASK(ide_drive_t *, int);
 
 u8 ide_read_error(ide_drive_t *);
+void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
 
 extern int drive_is_ready(ide_drive_t *);
 
-- 
cgit v1.2.3


From 761052e676372465fdeb97c148d5a4b0790fa8a0 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:54 +0200
Subject: ide: remove ->INB, ->OUTB and ->OUTBSYNC methods

* Remove no longer needed ->INB, ->OUTB and ->OUTBSYNC methods.

Then:

* Remove no longer used default_hwif_[mm]iops() and ide_[mm_]outbsync().

* Cleanup SuperIO handling in ns87415.c.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/icside.c          |  5 -----
 drivers/ide/arm/palm_bk3710.c     |  2 --
 drivers/ide/arm/rapide.c          |  2 --
 drivers/ide/h8300/ide-h8300.c     |  2 --
 drivers/ide/ide-iops.c            | 28 ------------------------
 drivers/ide/ide.c                 |  1 -
 drivers/ide/legacy/ide_platform.c |  4 +---
 drivers/ide/mips/swarm.c          |  3 ---
 drivers/ide/pci/ns87415.c         | 46 +++++++++++----------------------------
 drivers/ide/pci/scc_pata.c        | 12 ----------
 drivers/ide/pci/sgiioc4.c         |  3 ---
 drivers/ide/pci/siimage.c         |  2 +-
 drivers/ide/ppc/pmac.c            | 13 -----------
 include/linux/ide.h               |  7 ------
 14 files changed, 15 insertions(+), 115 deletions(-)

diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index f73422dd847..0fd01d630f1 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -469,8 +469,6 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 	if (!hwif)
 		return -ENODEV;
 
-	default_hwif_mmiops(hwif);
-
 	state->hwif[0] = hwif;
 
 	ecard_set_drvdata(ec, state);
@@ -547,14 +545,11 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 		return -ENODEV;
 
 	hwif->chipset = ide_acorn;
-	default_hwif_mmiops(hwif);
 
 	idx[0] = hwif->index;
 
 	mate = ide_find_port();
 	if (mate) {
-		default_hwif_mmiops(mate);
-
 		hws[1] = &hw[1];
 		idx[1] = mate->index;
 	}
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 0229d794d90..545563bc7e2 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -399,8 +399,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 
 	i = hwif->index;
 
-	default_hwif_mmiops(hwif);
-
 	idx[0] = i;
 
 	ide_device_add(idx, &palm_bk3710_port_info, hws);
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index 01896f6e8ac..a45c2f69494 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -59,8 +59,6 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 		goto release;
 	}
 
-	default_hwif_mmiops(hwif);
-
 	idx[0] = hwif->index;
 
 	ide_device_add(idx, &rapide_port_info, hws);
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 548a2bf232c..0795d655491 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -171,8 +171,6 @@ static inline void hw_setup(hw_regs_t *hw)
 
 static inline void hwif_setup(ide_hwif_t *hwif)
 {
-	default_hwif_iops(hwif);
-
 	hwif->tf_load = h8300_tf_load;
 	hwif->tf_read = h8300_tf_read;
 
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index cb11c7861a5..6c54fe1f984 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -42,18 +42,6 @@ static void ide_outb (u8 val, unsigned long port)
 	outb(val, port);
 }
 
-static void ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
-{
-	outb(addr, port);
-}
-
-void default_hwif_iops (ide_hwif_t *hwif)
-{
-	hwif->OUTB	= ide_outb;
-	hwif->OUTBSYNC	= ide_outbsync;
-	hwif->INB	= ide_inb;
-}
-
 /*
  *	MMIO operations, typically used for SATA controllers
  */
@@ -68,22 +56,6 @@ static void ide_mm_outb (u8 value, unsigned long port)
 	writeb(value, (void __iomem *) port);
 }
 
-static void ide_mm_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
-{
-	writeb(value, (void __iomem *) port);
-}
-
-void default_hwif_mmiops (ide_hwif_t *hwif)
-{
-	hwif->OUTB	= ide_mm_outb;
-	/* Most systems will need to override OUTBSYNC, alas however
-	   this one is controller specific! */
-	hwif->OUTBSYNC	= ide_mm_outbsync;
-	hwif->INB	= ide_mm_inb;
-}
-
-EXPORT_SYMBOL(default_hwif_mmiops);
-
 void SELECT_DRIVE (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index b6018f7b090..434dd02a4bd 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -101,7 +101,6 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
 
 	init_completion(&hwif->gendev_rel_comp);
 
-	default_hwif_iops(hwif);
 	default_hwif_transport(hwif);
 
 	ide_port_init_devices_data(hwif);
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
index 609da0d4319..3d71e336a22 100644
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -103,10 +103,8 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 	plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start);
 	hw.dev = &pdev->dev;
 
-	if (mmio) {
+	if (mmio)
 		d.host_flags |= IDE_HFLAG_MMIO;
-		default_hwif_mmiops(hwif);
-	}
 
 	idx[0] = hwif->index;
 
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
index 6da6844d2d8..c1ffb83a2de 100644
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -120,9 +120,6 @@ static int __devinit swarm_ide_probe(struct device *dev)
 	if (hwif == NULL)
 		goto err;
 
-	/* Setup MMIO ops. */
-	default_hwif_mmiops(hwif);
-
 	idx[0] = hwif->index;
 
 	ide_device_add(idx, &swarm_port_info, hws);
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index b9bb8428b35..02fd3a877af 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -28,10 +28,6 @@
  */
 #include <asm/superio.h>
 
-static unsigned long superio_ide_status[2];
-static unsigned long superio_ide_select[2];
-static unsigned long superio_ide_dma_status[2];
-
 #define SUPERIO_IDE_MAX_RETRIES 25
 
 /* Because of a defect in Super I/O, all reads of the PCI DMA status 
@@ -40,27 +36,18 @@ static unsigned long superio_ide_dma_status[2];
  */
 static u8 superio_ide_inb (unsigned long port)
 {
-	if (port == superio_ide_status[0] ||
-	    port == superio_ide_status[1] ||
-	    port == superio_ide_select[0] ||
-	    port == superio_ide_select[1] ||
-	    port == superio_ide_dma_status[0] ||
-	    port == superio_ide_dma_status[1]) {
-		u8 tmp;
-		int retries = SUPERIO_IDE_MAX_RETRIES;
-
-		/* printk(" [ reading port 0x%x with retry ] ", port); */
+	u8 tmp;
+	int retries = SUPERIO_IDE_MAX_RETRIES;
 
-		do {
-			tmp = inb(port);
-			if (tmp == 0)
-				udelay(50);
-		} while (tmp == 0 && retries-- > 0);
+	/* printk(" [ reading port 0x%x with retry ] ", port); */
 
-		return tmp;
-	}
+	do {
+		tmp = inb(port);
+		if (tmp == 0)
+			udelay(50);
+	} while (tmp == 0 && retries-- > 0);
 
-	return inb(port);
+	return tmp;
 }
 
 static u8 superio_read_status(ide_hwif_t *hwif)
@@ -120,27 +107,20 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
 static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	u32 base, dmabase;
+	u32 dma_stat;
 	u8 port = hwif->channel, tmp;
 
-	base = pci_resource_start(pdev, port * 2) & ~3;
-	dmabase = pci_resource_start(pdev, 4) & ~3;
-
-	superio_ide_status[port] = base + 7;
-	superio_ide_select[port] = base + 6;
-	superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa);
+	dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa);
 
 	/* Clear error/interrupt, enable dma */
-	tmp = superio_ide_inb(superio_ide_dma_status[port]);
-	outb(tmp | 0x66, superio_ide_dma_status[port]);
+	tmp = superio_ide_inb(dma_stat);
+	outb(tmp | 0x66, dma_stat);
 
 	hwif->read_status	  = superio_read_status;
 	hwif->read_sff_dma_status = superio_read_sff_dma_status;
 
 	hwif->tf_read = superio_tf_read;
 
-	/* We need to override inb to workaround a SuperIO errata */
-	hwif->INB = superio_ide_inb;
 }
 
 static void __devinit init_iops_ns87415(ide_hwif_t *hwif)
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index c110f359b03..38765d9b031 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -188,14 +188,6 @@ static void scc_ide_outb(u8 addr, unsigned long port)
 	out_be32((void*)port, addr);
 }
 
-static void scc_ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
-{
-	out_be32((void*)port, addr);
-	eieio();
-	in_be32((void*)(hwif->dma_base + 0x01c));
-	eieio();
-}
-
 static void
 scc_ide_outsw(unsigned long port, void *addr, u32 count)
 {
@@ -829,10 +821,6 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
 	hwif->input_data  = scc_input_data;
 	hwif->output_data = scc_output_data;
 
-	hwif->INB = scc_ide_inb;
-	hwif->OUTB = scc_ide_outb;
-	hwif->OUTBSYNC = scc_ide_outbsync;
-
 	hwif->dma_base = dma_base;
 	hwif->config_data = ports->ctl;
 }
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 3005a6334a5..86f7c490183 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -623,9 +623,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	if (hwif == NULL)
 		goto err;
 
-	/* The IOC4 uses MMIO rather than Port IO. */
-	default_hwif_mmiops(hwif);
-
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 21d7137f7d6..5965a35d94a 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -601,7 +601,7 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
 	 *	Fill in the basic hwif bits
 	 */
 	hwif->host_flags |= IDE_HFLAG_MMIO;
-	default_hwif_mmiops(hwif);
+
 	hwif->hwif_data	= addr;
 
 	/*
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index a0d66480a79..ed073c6635a 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -486,15 +486,6 @@ pmac_ide_do_update_timings(ide_drive_t *drive)
 		pmac_ide_selectproc(drive);
 }
 
-static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port)
-{
-	u32 tmp;
-	
-	writeb(value, (void __iomem *) port);
-	tmp = readl((void __iomem *)(hwif->io_ports.data_addr
-				     + IDE_TIMING_CONFIG));
-}
-
 static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd)
 {
 	writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
@@ -1118,10 +1109,6 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	hwif->exec_command = pmac_exec_command;
 	hwif->set_irq	   = pmac_set_irq;
 
-	/* Setup MMIO ops */
-	default_hwif_mmiops(hwif);
-       	hwif->OUTBSYNC = pmac_outbsync;
-
 	idx[0] = hwif->index;
 
 	ide_device_add(idx, &d, hws);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index fd05758e699..0544ff7d9af 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -504,11 +504,6 @@ typedef struct hwif_s {
 
 	void (*ide_dma_clear_irq)(ide_drive_t *drive);
 
-	void (*OUTB)(u8 addr, unsigned long port);
-	void (*OUTBSYNC)(struct hwif_s *hwif, u8 addr, unsigned long port);
-
-	u8  (*INB)(unsigned long port);
-
 	/* dma physical region descriptor table (cpu view) */
 	unsigned int	*dmatable_cpu;
 	/* dma physical region descriptor table (dma view) */
@@ -1027,8 +1022,6 @@ static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
 }
 #endif
 
-extern void default_hwif_iops(ide_hwif_t *);
-extern void default_hwif_mmiops(ide_hwif_t *);
 extern void default_hwif_transport(ide_hwif_t *);
 
 typedef struct ide_pci_enablebit_s {
-- 
cgit v1.2.3


From cbf3d262e0b70652d602b9c072daf1c1f29dccf0 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:54 +0200
Subject: ide: limit cy82c693 host driver to ALPHA

Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 15b09b89588..6bbacb59efb 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -510,6 +510,7 @@ config BLK_DEV_TRIFLEX
 
 config BLK_DEV_CY82C693
 	tristate "CY82C693 chipset support"
+	depends on ALPHA
 	select IDE_TIMINGS
 	select BLK_DEV_IDEDMA_PCI
 	help
-- 
cgit v1.2.3


From 472b4bc1af50431e08130c786ef0612f5b641839 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:55 +0200
Subject: ide: mark hpt34x host driver as BROKEN

Alan Cox has noticed some time ago that hpt34x is broken
(http://lkml.org/lkml/2007/7/3/257):

"No the old driver doesn't even do that. It starts up. It spuriously
adjusts some non writable PCI BAR registers, prints a message about
resources being in use already then exits."

Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 6bbacb59efb..04d9c4d459d 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -549,6 +549,7 @@ config BLK_DEV_CS5535
 
 config BLK_DEV_HPT34X
 	tristate "HPT34X chipset support"
+	depends on BROKEN
 	select BLK_DEV_IDEDMA_PCI
 	help
 	  This driver adds up to 4 more EIDE devices sharing a single
-- 
cgit v1.2.3


From ba4b2e607e4e9eaa929935325dafd5c86d3b5262 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:55 +0200
Subject: ide: remove dead Virtual DMA support

Lets remove dead Virtual DMA support for now so it doesn't clutter
core IDE code (it can be bring back when there is a need for it):

* Remove IDE_HFLAG_VDMA host flag.

* Remove ide_drive_t.vdma flag.

* cs5520.c: remove stale FIXMEs, cs5520_dma_host_set() and cs5520_dma_ops
  (also there is no longer a need to set IDE_HFLAG_NO_ATAPI_DMA).

There should be no functional changes caused by this patch.

Cc: TAKADA Yoshihito <takada@mbf.nifty.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-disk.c   |  2 +-
 drivers/ide/ide-dma.c    |  5 ++---
 drivers/ide/ide-iops.c   |  3 +--
 drivers/ide/pci/cs5520.c | 30 ------------------------------
 include/linux/ide.h      |  3 ---
 5 files changed, 4 insertions(+), 39 deletions(-)

diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 3a2e80237c1..df5fe575687 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -158,7 +158,7 @@ static void ide_tf_set_cmd(ide_drive_t *drive, ide_task_t *task, u8 dma)
 	write = (task->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
 
 	if (dma)
-		index = drive->vdma ? 4 : 8;
+		index = 8;
 	else
 		index = drive->mult_count ? 0 : 4;
 
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index ecf60dbbe3e..e72112efab9 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -756,9 +756,8 @@ static int ide_tune_dma(ide_drive_t *drive)
 static int ide_dma_check(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	int vdma = (hwif->host_flags & IDE_HFLAG_VDMA)? 1 : 0;
 
-	if (!vdma && ide_tune_dma(drive))
+	if (ide_tune_dma(drive))
 		return 0;
 
 	/* TODO: always do PIO fallback */
@@ -767,7 +766,7 @@ static int ide_dma_check(ide_drive_t *drive)
 
 	ide_set_max_pio(drive);
 
-	return vdma ? 0 : -1;
+	return -1;
 }
 
 int ide_id_dma_bug(ide_drive_t *drive)
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 6c54fe1f984..c9d15be4c48 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -866,8 +866,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 
  skip:
 #ifdef CONFIG_BLK_DEV_IDEDMA
-	if ((speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA)) &&
-	    drive->using_dma)
+	if (speed >= XFER_SW_DMA_0 && drive->using_dma)
 		hwif->dma_ops->dma_host_set(drive, 1);
 	else if (hwif->dma_ops)	/* check if host supports DMA */
 		ide_dma_off_quietly(drive);
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index a13f2bc0665..d30cb4d99c4 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -62,8 +62,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	int controller = drive->dn > 1 ? 1 : 0;
 
-	/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
-
 	/* 8bit CAT/CRT - 8bit command timing for channel */
 	pci_write_config_byte(pdev, 0x62 + controller, 
 		(cs5520_pio_clocks[pio].recovery << 4) |
@@ -89,45 +87,17 @@ static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	cs5520_set_pio_mode(drive, 0);
 }
 
-/*
- *	We wrap the DMA activate to set the vdma flag. This is needed
- *	so that the IDE DMA layer issues PIO not DMA commands over the
- *	DMA channel
- *
- *	ATAPI is harder so disable it for now using IDE_HFLAG_NO_ATAPI_DMA
- */
-
-static void cs5520_dma_host_set(ide_drive_t *drive, int on)
-{
-	drive->vdma = on;
-	ide_dma_host_set(drive, on);
-}
-
 static const struct ide_port_ops cs5520_port_ops = {
 	.set_pio_mode		= cs5520_set_pio_mode,
 	.set_dma_mode		= cs5520_set_dma_mode,
 };
 
-static const struct ide_dma_ops cs5520_dma_ops = {
-	.dma_host_set		= cs5520_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
-	.dma_start		= ide_dma_start,
-	.dma_end		= __ide_dma_end,
-	.dma_test_irq		= ide_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timeout		= ide_dma_timeout,
-};
-
-/* FIXME: VDMA is disabled because it caused system hangs */
 #define DECLARE_CS_DEV(name_str)				\
 	{							\
 		.name		= name_str,			\
 		.port_ops	= &cs5520_port_ops,		\
-		.dma_ops	= &cs5520_dma_ops,		\
 		.host_flags	= IDE_HFLAG_ISA_PORTS |		\
 				  IDE_HFLAG_CS5520 |		\
-				  IDE_HFLAG_NO_ATAPI_DMA |	\
 				  IDE_HFLAG_ABUSE_SET_DMA_MODE, \
 		.pio_mask	= ATA_PIO4,			\
 	}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 0544ff7d9af..3f288940025 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -355,7 +355,6 @@ typedef struct ide_drive_s {
 	unsigned nodma		: 1;	/* disallow DMA */
 	unsigned remap_0_to_1	: 1;	/* 0=noremap, 1=remap 0->1 (for EZDrive) */
 	unsigned blocked        : 1;	/* 1=powermanagment told us not to do anything, so sleep nicely */
-	unsigned vdma		: 1;	/* 1=doing PIO over DMA 0=doing normal DMA */
 	unsigned scsi		: 1;	/* 0=default, 1=ide-scsi emulation */
 	unsigned sleeping	: 1;	/* 1=sleeping & sleep field valid */
 	unsigned post_reset	: 1;
@@ -1097,8 +1096,6 @@ enum {
 	IDE_HFLAG_NO_IO_32BIT		= (1 << 30),
 	/* never unmask IRQs */
 	IDE_HFLAG_NO_UNMASK_IRQS	= (1 << 31),
-	/* host uses VDMA (disabled for now) */
-	IDE_HFLAG_VDMA			= 0,
 };
 
 #ifdef CONFIG_BLK_DEV_OFFBOARD
-- 
cgit v1.2.3


From c30daac190de23779090c645e680c7977377032c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:55 +0200
Subject: ide: filter out invalid transfer mode values in set_xfer_rate()

Filter out invalid transfer mode values (0x02-0x07) in write handler
for obsoleted /proc/ide/hd?/settings:current_speed setting.

While at it:

* Use XFER_UDMA_6 define.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-proc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 8af88bf0969..54d57a15d59 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -345,7 +345,7 @@ static int set_xfer_rate (ide_drive_t *drive, int arg)
 	ide_task_t task;
 	int err;
 
-	if (arg < 0 || arg > 70)
+	if (arg < 0 || (arg > 1 && arg < XFER_PIO_0) || arg > XFER_UDMA_6)
 		return -EINVAL;
 
 	memset(&task, 0, sizeof(task));
-- 
cgit v1.2.3


From 3b2a5c7149ee4af4aff8fee953f66fc846d92cea Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:56 +0200
Subject: ide: filter out "default" transfer mode values in set_xfer_rate()

* Filter out "default" transfer mode values (0x00 - default PIO mode,
  0x01 - default PIO mode w/ IORDY disabled) in write handler for obsoleted
  /proc/ide/hd?/settings:current_speed setting.

  Allowing "default" transfer mode values is a dangerous thing to do as
  we don't support programming controller to the "default" transfer mode
  and devices often use different values for the default and maximum PIO
  mode (i.e. PIO2 default and PIO4 maximum) so the controller will stay
  programmed for higher PIO mode while device will use the lower PIO mode.

  There is no functionality loss as by using special IOCTLs device can
  still be programmed to "default" transfer modes (it is only useful for
  debugging/testing purposes anyway).

* Remove no longer needed IDE_HFLAG_ABUSE_SET_DMA_MODE host flag, it was
  previously used by few host drivers to program the controller to PIO0
  timings for "default" transfer mode == 0x01 (although some host drivers
  would program invalid PIO timings instead).

* Cleanup ide_set_xfer_rate() and add BUG_ON().

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-lib.c          | 15 ++-------------
 drivers/ide/ide-proc.c         |  4 ++--
 drivers/ide/pci/aec62xx.c      |  5 -----
 drivers/ide/pci/amd74xx.c      |  1 -
 drivers/ide/pci/cs5520.c       |  3 +--
 drivers/ide/pci/cs5535.c       |  3 +--
 drivers/ide/pci/hpt34x.c       |  1 -
 drivers/ide/pci/hpt366.c       |  1 -
 drivers/ide/pci/pdc202xx_old.c |  1 -
 drivers/ide/pci/serverworks.c  |  4 +---
 drivers/ide/pci/tc86c001.c     |  3 +--
 drivers/ide/pci/via82cxxx.c    |  1 -
 include/linux/ide.h            |  1 -
 13 files changed, 8 insertions(+), 35 deletions(-)

diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 13af72f09ec..7ac44d51547 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -266,22 +266,11 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
 
 	rate = ide_rate_filter(drive, rate);
 
+	BUG_ON(rate < XFER_PIO_0);
+
 	if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5)
 		return ide_set_pio_mode(drive, rate);
 
-	/*
-	 * TODO: transfer modes 0x00-0x07 passed from the user-space are
-	 * currently handled here which needs fixing (please note that such
-	 * case could happen iff the transfer mode has already been set on
-	 * the device by ide-proc.c::set_xfer_rate()).
-	 */
-	if (rate < XFER_PIO_0) {
-		if (hwif->host_flags & IDE_HFLAG_ABUSE_SET_DMA_MODE)
-			return ide_set_dma_mode(drive, rate);
-		else
-			return ide_config_drive_speed(drive, rate);
-	}
-
 	return ide_set_dma_mode(drive, rate);
 }
 
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 54d57a15d59..151c91e933d 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -345,7 +345,7 @@ static int set_xfer_rate (ide_drive_t *drive, int arg)
 	ide_task_t task;
 	int err;
 
-	if (arg < 0 || (arg > 1 && arg < XFER_PIO_0) || arg > XFER_UDMA_6)
+	if (arg < XFER_PIO_0 || arg > XFER_UDMA_6)
 		return -EINVAL;
 
 	memset(&task, 0, sizeof(task));
@@ -357,7 +357,7 @@ static int set_xfer_rate (ide_drive_t *drive, int arg)
 
 	err = ide_no_data_taskfile(drive, &task);
 
-	if (!err && arg) {
+	if (!err) {
 		ide_set_xfer_rate(drive, (u8) arg);
 		ide_driveid_update(drive);
 	}
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index ae7a4329a58..fbc43e121e6 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -195,7 +195,6 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.host_flags	= IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_ATAPI_DMA |
 				  IDE_HFLAG_NO_DSC |
-				  IDE_HFLAG_ABUSE_SET_DMA_MODE |
 				  IDE_HFLAG_OFF_BOARD,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -205,7 +204,6 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_aec62xx,
 		.port_ops	= &atp86x_port_ops,
 		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
-				  IDE_HFLAG_ABUSE_SET_DMA_MODE |
 				  IDE_HFLAG_OFF_BOARD,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -216,7 +214,6 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.port_ops	= &atp86x_port_ops,
 		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_ABUSE_SET_DMA_MODE |
 				  IDE_HFLAG_NON_BOOTABLE,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -226,7 +223,6 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_aec62xx,
 		.port_ops	= &atp86x_port_ops,
 		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_ABUSE_SET_DMA_MODE |
 				  IDE_HFLAG_OFF_BOARD,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -237,7 +233,6 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.port_ops	= &atp86x_port_ops,
 		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_ABUSE_SET_DMA_MODE |
 				  IDE_HFLAG_OFF_BOARD,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 0bfcdd0e77b..ef7d971031e 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -218,7 +218,6 @@ static const struct ide_port_ops amd_port_ops = {
 
 #define IDE_HFLAGS_AMD \
 	(IDE_HFLAG_PIO_NO_BLACKLIST | \
-	 IDE_HFLAG_ABUSE_SET_DMA_MODE | \
 	 IDE_HFLAG_POST_SET_MODE | \
 	 IDE_HFLAG_IO_32BIT | \
 	 IDE_HFLAG_UNMASK_IRQS)
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index d30cb4d99c4..e8e7df1915b 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -97,8 +97,7 @@ static const struct ide_port_ops cs5520_port_ops = {
 		.name		= name_str,			\
 		.port_ops	= &cs5520_port_ops,		\
 		.host_flags	= IDE_HFLAG_ISA_PORTS |		\
-				  IDE_HFLAG_CS5520 |		\
-				  IDE_HFLAG_ABUSE_SET_DMA_MODE, \
+				  IDE_HFLAG_CS5520,		\
 		.pio_mask	= ATA_PIO4,			\
 	}
 
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index dc97c48623f..5404fe4f701 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -171,8 +171,7 @@ static const struct ide_port_ops cs5535_port_ops = {
 static const struct ide_port_info cs5535_chipset __devinitdata = {
 	.name		= "CS5535",
 	.port_ops	= &cs5535_port_ops,
-	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE |
-			  IDE_HFLAG_ABUSE_SET_DMA_MODE,
+	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
 	.pio_mask	= ATA_PIO4,
 	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA4,
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index 84c36c11719..9e1d1c4741d 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -123,7 +123,6 @@ static const struct ide_port_ops hpt34x_port_ops = {
 #define IDE_HFLAGS_HPT34X \
 	(IDE_HFLAG_NO_ATAPI_DMA | \
 	 IDE_HFLAG_NO_DSC | \
-	 IDE_HFLAG_ABUSE_SET_DMA_MODE | \
 	 IDE_HFLAG_NO_AUTODMA)
 
 static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index e5651cefa39..1f1135ce7cd 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1409,7 +1409,6 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
 
 #define IDE_HFLAGS_HPT3XX \
 	(IDE_HFLAG_NO_ATAPI_DMA | \
-	 IDE_HFLAG_ABUSE_SET_DMA_MODE | \
 	 IDE_HFLAG_OFF_BOARD)
 
 static const struct ide_port_ops hpt3xx_port_ops = {
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 1c2f9df3112..e54dc653b8c 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -312,7 +312,6 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
 
 #define IDE_HFLAGS_PDC202XX \
 	(IDE_HFLAG_ERROR_STOPS_FIFO | \
-	 IDE_HFLAG_ABUSE_SET_DMA_MODE | \
 	 IDE_HFLAG_OFF_BOARD)
 
 static const struct ide_port_ops pdc20246_port_ops = {
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index a1fb20826a5..127ccb45e26 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -349,9 +349,7 @@ static const struct ide_port_ops svwks_port_ops = {
 	.cable_detect		= svwks_cable_detect,
 };
 
-#define IDE_HFLAGS_SVWKS \
-	(IDE_HFLAG_LEGACY_IRQS | \
-	 IDE_HFLAG_ABUSE_SET_DMA_MODE)
+#define IDE_HFLAGS_SVWKS IDE_HFLAG_LEGACY_IRQS
 
 static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
 	{	/* 0 */
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index a81d47c55ce..477e1979010 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -206,8 +206,7 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = {
 	.init_hwif	= init_hwif_tc86c001,
 	.port_ops	= &tc86c001_port_ops,
 	.dma_ops	= &tc86c001_dma_ops,
-	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD |
-			  IDE_HFLAG_ABUSE_SET_DMA_MODE,
+	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
 	.pio_mask	= ATA_PIO4,
 	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA4,
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index e47384c70c4..09dc4803ef9 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -425,7 +425,6 @@ static const struct ide_port_info via82cxxx_chipset __devinitdata = {
 	.enablebits	= { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
 	.port_ops	= &via_port_ops,
 	.host_flags	= IDE_HFLAG_PIO_NO_BLACKLIST |
-			  IDE_HFLAG_ABUSE_SET_DMA_MODE |
 			  IDE_HFLAG_POST_SET_MODE |
 			  IDE_HFLAG_IO_32BIT,
 	.pio_mask	= ATA_PIO5,
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 3f288940025..260e871ae88 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1085,7 +1085,6 @@ enum {
 	IDE_HFLAG_IO_32BIT		= (1 << 24),
 	/* unmask IRQs */
 	IDE_HFLAG_UNMASK_IRQS		= (1 << 25),
-	IDE_HFLAG_ABUSE_SET_DMA_MODE	= (1 << 26),
 	/* serialize ports if DMA is possible (for sl82c105) */
 	IDE_HFLAG_SERIALIZE_DMA		= (1 << 27),
 	/* force host out of "simplex" mode */
-- 
cgit v1.2.3


From 73dc532bc1eebe3bff6b918c5685a219eae27f97 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:56 +0200
Subject: gayle: reserve memory resources at once

* Reserve memory resources for all IDE ports at once by moving
  request_mem_region() out of 'for ()' loop and always defining
  GAYLE_IDEREG_SIZE to 0x2000.

* Keep memory resources even if no free IDE slots can be found
  (this driver is unloadable currently).

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/legacy/gayle.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index e45c7341186..7baeefa870f 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -31,6 +31,8 @@
 #define GAYLE_BASE_4000	0xdd2020	/* A4000/A4000T */
 #define GAYLE_BASE_1200	0xda0000	/* A1200/A600 and E-Matrix 530 */
 
+#define GAYLE_IDEREG_SIZE	0x2000
+
     /*
      *  Offsets from one of the above bases
      */
@@ -56,13 +58,11 @@
 #define GAYLE_NUM_HWIFS		1
 #define GAYLE_NUM_PROBE_HWIFS	GAYLE_NUM_HWIFS
 #define GAYLE_HAS_CONTROL_REG	1
-#define GAYLE_IDEREG_SIZE	0x2000
 #else /* CONFIG_BLK_DEV_IDEDOUBLER */
 #define GAYLE_NUM_HWIFS		2
 #define GAYLE_NUM_PROBE_HWIFS	(ide_doubler ? GAYLE_NUM_HWIFS : \
 					       GAYLE_NUM_HWIFS-1)
 #define GAYLE_HAS_CONTROL_REG	(!ide_doubler)
-#define GAYLE_IDEREG_SIZE	(ide_doubler ? 0x1000 : 0x2000)
 
 static int ide_doubler;
 module_param_named(doubler, ide_doubler, bool, 0);
@@ -124,6 +124,9 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
 
 static int __init gayle_init(void)
 {
+    unsigned long phys_base, res_start, res_n;
+    unsigned long base, ctrlport, irqport;
+    ide_ack_intr_t *ack_intr;
     int a4000, i;
     hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
     u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
@@ -149,12 +152,6 @@ found:
 #endif
 			 "");
 
-    for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
-	unsigned long base, ctrlport, irqport;
-	ide_ack_intr_t *ack_intr;
-	ide_hwif_t *hwif;
-	unsigned long phys_base, res_start, res_n;
-
 	if (a4000) {
 	    phys_base = GAYLE_BASE_4000;
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
@@ -168,15 +165,16 @@ found:
  * FIXME: we now have selectable modes between mmio v/s iomio
  */
 
-	phys_base += i*GAYLE_NEXT_PORT;
-
 	res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
 	res_n = GAYLE_IDEREG_SIZE;
 
 	if (!request_mem_region(res_start, res_n, "IDE"))
-	    continue;
+		return -EBUSY;
 
-	base = (unsigned long)ZTWO_VADDR(phys_base);
+    for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
+	ide_hwif_t *hwif;
+
+	base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
 	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
 
 	gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
@@ -187,8 +185,7 @@ found:
 
 	    hws[i] = &hw[i];
 	    idx[i] = hwif->index;
-	} else
-	    release_mem_region(res_start, res_n);
+	}
     }
 
     ide_device_add(idx, NULL, hws);
-- 
cgit v1.2.3


From edc74b247bedb3a1f80eb6371d4171f2d49c1c77 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:56 +0200
Subject: ide-generic: probing fix

* Don't skip probing IDE port if the corresponding ide_hwifs[] slot
  is already occupied.

* Remove duplicate idx[i] assignment.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-generic.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index bb9fc905d60..a5c352abff5 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -118,15 +118,9 @@ static int __init ide_generic_init(void)
 				continue;
 			}
 
-			/*
-			 * Skip probing if the corresponding
-			 * slot is already occupied.
-			 */
 			hwif = ide_find_port();
-			if (hwif == NULL || hwif->index != i) {
-				idx[i] = 0xff;
+			if (hwif == NULL)
 				continue;
-			}
 
 			hwif->chipset = ide_generic;
 
-- 
cgit v1.2.3


From d6276b5f5cc7508124de291f3ed59c6945c17ae7 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:56 +0200
Subject: ide: add 'config' field to hw_regs_t

Add 'config' field to hw_regs_t and use it to set hwif->config_data in
ide_init_port_hw(), then convert ide_legacy_init_one() to use hw->config.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 4 +---
 drivers/ide/ide.c       | 1 +
 include/linux/ide.h     | 1 +
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 21cea45e9f2..3cc8ade2cc4 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1689,14 +1689,12 @@ static void ide_legacy_init_one(u8 *idx, hw_regs_t **hws, hw_regs_t *hw,
 	ide_std_init_ports(hw, base, ctl);
 	hw->irq = irq;
 	hw->chipset = d->chipset;
+	hw->config = config;
 
 	hwif = ide_find_port_slot(d);
 	if (hwif) {
 		hwif->chipset = hw->chipset;
 
-		if (config)
-			hwif->config_data = config;
-
 		hws[port_no] = hw;
 		idx[port_no] = hwif->index;
 	}
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 434dd02a4bd..961f31c648c 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -286,6 +286,7 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
 	hwif->dev = hw->dev;
 	hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
 	hwif->ack_intr = hw->ack_intr;
+	hwif->config_data = hw->config;
 }
 
 /*
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 260e871ae88..e340218b2a5 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -178,6 +178,7 @@ typedef struct hw_regs_s {
 	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
 	hwif_chipset_t  chipset;
 	struct device	*dev, *parent;
+	unsigned long	config;
 } hw_regs_t;
 
 void ide_init_port_data(struct hwif_s *, unsigned int);
-- 
cgit v1.2.3


From 374e042c3e767ac2e5a40b78529220e0b3de793c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:56 +0200
Subject: ide: add struct ide_tp_ops (take 2)

* Add struct ide_tp_ops for transport methods.

* Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info
  and ide_hwif_t.

* Set the default hwif->tp_ops in ide_init_port_data().

* Set host driver specific hwif->tp_ops in ide_init_port().

* Export ide_exec_command(), ide_read_status(), ide_read_altstatus(),
  ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}()
  and ata_{in,out}put_data().

* Convert host drivers and core code to use struct ide_tp_ops.

* Remove no longer needed default_hwif_transport().

* Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops.

While at it:

* Use struct ide_port_info in falconide.c and q40ide.c.

* Rename ata_{in,out}put_data() to ide_{in,out}put_data().

v2:

* Fix missing convertion in ns87415.c.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/icside.c       |   2 +-
 drivers/ide/h8300/ide-h8300.c  |  26 +++++----
 drivers/ide/ide-atapi.c        |  13 +++--
 drivers/ide/ide-cd.c           |  12 ++--
 drivers/ide/ide-dma.c          |  12 ++--
 drivers/ide/ide-floppy.c       |   8 +--
 drivers/ide/ide-io.c           |  32 +++++------
 drivers/ide/ide-iops.c         | 122 +++++++++++++++++++++++------------------
 drivers/ide/ide-lib.c          |   2 +-
 drivers/ide/ide-probe.c        |  53 ++++++++++--------
 drivers/ide/ide-tape.c         |   8 +--
 drivers/ide/ide-taskfile.c     |  29 ++++++----
 drivers/ide/ide.c              |   2 +-
 drivers/ide/legacy/falconide.c |  27 +++++++--
 drivers/ide/legacy/q40ide.c    |  27 +++++++--
 drivers/ide/mips/au1xxx-ide.c  |  29 +++++++---
 drivers/ide/pci/ns87415.c      |  50 +++++++++--------
 drivers/ide/pci/scc_pata.c     |  29 +++++-----
 drivers/ide/pci/sgiioc4.c      |  18 +++++-
 drivers/ide/ppc/pmac.c         |  21 +++++--
 drivers/ide/setup-pci.c        |   2 +-
 drivers/scsi/ide-scsi.c        |   7 ++-
 include/linux/ide.h            |  52 ++++++++++++------
 23 files changed, 358 insertions(+), 225 deletions(-)

diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 0fd01d630f1..0283d162f7f 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -382,7 +382,7 @@ static void icside_dma_timeout(ide_drive_t *drive)
 	if (icside_dma_test_irq(drive))
 		return;
 
-	ide_dump_status(drive, "DMA timeout", hwif->read_status(hwif));
+	ide_dump_status(drive, "DMA timeout", hwif->tp_ops->read_status(hwif));
 
 	icside_dma_end(drive);
 }
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 0795d655491..84644e15053 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -155,6 +155,21 @@ static void h8300_output_data(ide_drive_t *drive, struct request *rq,
 	mm_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
 }
 
+static const struct ide_tp_ops h8300_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= h8300_tf_load,
+	.tf_read		= h8300_tf_read,
+
+	.input_data		= h8300_input_data,
+	.output_data		= h8300_output_data,
+};
+
 #define H8300_IDE_GAP (2)
 
 static inline void hw_setup(hw_regs_t *hw)
@@ -169,16 +184,8 @@ static inline void hw_setup(hw_regs_t *hw)
 	hw->chipset = ide_generic;
 }
 
-static inline void hwif_setup(ide_hwif_t *hwif)
-{
-	hwif->tf_load = h8300_tf_load;
-	hwif->tf_read = h8300_tf_read;
-
-	hwif->input_data  = h8300_input_data;
-	hwif->output_data = h8300_output_data;
-}
-
 static const struct ide_port_info h8300_port_info = {
+	.tp_ops			= &h8300_tp_ops,
 	.host_flags		= IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA,
 };
 
@@ -205,7 +212,6 @@ static int __init h8300_ide_init(void)
 		return -ENOENT;
 
 	index = hwif->index;
-	hwif_setup(hwif);
 
 	idx[0] = index;
 
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index f17a00ccbe9..6789b81ea78 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -22,6 +22,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
 {
 	ide_hwif_t *hwif = drive->hwif;
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	xfer_func_t *xferfunc;
 	unsigned int temp;
 	u16 bcount;
@@ -35,7 +36,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	}
 
 	/* Clear the interrupt */
-	stat = hwif->read_status(hwif);
+	stat = tp_ops->read_status(hwif);
 
 	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
 		if (hwif->dma_ops->dma_end(drive) ||
@@ -140,7 +141,7 @@ cmd_finished:
 					if (pc->sg)
 						io_buffers(drive, pc, temp, 0);
 					else
-						hwif->input_data(drive, NULL,
+						tp_ops->input_data(drive, NULL,
 							pc->cur_pos, temp);
 					printk(KERN_ERR "%s: transferred %d of "
 							"%d bytes\n",
@@ -157,9 +158,9 @@ cmd_finished:
 			debug_log("The device wants to send us more data than "
 				  "expected - allowing transfer\n");
 		}
-		xferfunc = hwif->input_data;
+		xferfunc = tp_ops->input_data;
 	} else
-		xferfunc = hwif->output_data;
+		xferfunc = tp_ops->output_data;
 
 	if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
 	    (drive->media == ide_tape && !scsi && pc->bh) ||
@@ -188,7 +189,7 @@ static u8 ide_read_ireason(ide_drive_t *drive)
 	memset(&task, 0, sizeof(task));
 	task.tf_flags = IDE_TFLAG_IN_NSECT;
 
-	drive->hwif->tf_read(drive, &task);
+	drive->hwif->tp_ops->tf_read(drive, &task);
 
 	return task.tf.nsect & 3;
 }
@@ -249,7 +250,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
 
 	/* Send the actual packet */
 	if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0)
-		hwif->output_data(drive, NULL, pc->c, 12);
+		hwif->tp_ops->output_data(drive, NULL, pc->c, 12);
 
 	return ide_started;
 }
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 563a380d0e7..d9798ca433b 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -285,7 +285,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
 	int stat, err, sense_key;
 
 	/* check for errors */
-	stat = hwif->read_status(hwif);
+	stat = hwif->tp_ops->read_status(hwif);
 
 	if (stat_ret)
 		*stat_ret = stat;
@@ -590,7 +590,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
 		cmd_len = ATAPI_MIN_CDB_BYTES;
 
 	/* send the command to the device */
-	hwif->output_data(drive, NULL, rq->cmd, cmd_len);
+	hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
 
 	/* start the DMA if need be */
 	if (info->dma)
@@ -627,7 +627,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
 		 * Some drives (ASUS) seem to tell us that status info is
 		 * available.  Just get it and ignore.
 		 */
-		(void)hwif->read_status(hwif);
+		(void)hwif->tp_ops->read_status(hwif);
 		return 0;
 	} else {
 		/* drive wants a command packet, or invalid ireason... */
@@ -990,10 +990,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 
 	if (ireason == 0) {
 		write = 1;
-		xferfunc = hwif->output_data;
+		xferfunc = hwif->tp_ops->output_data;
 	} else {
 		write = 0;
-		xferfunc = hwif->input_data;
+		xferfunc = hwif->tp_ops->input_data;
 	}
 
 	/* transfer data */
@@ -1200,7 +1200,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		if (info->cd_flags & IDE_CD_FLAG_SEEKING) {
 			ide_hwif_t *hwif = drive->hwif;
 			unsigned long elapsed = jiffies - info->start_seek;
-			int stat = hwif->read_status(hwif);
+			int stat = hwif->tp_ops->read_status(hwif);
 
 			if ((stat & SEEK_STAT) != SEEK_STAT) {
 				if (elapsed < IDECD_SEEK_TIMEOUT) {
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index e72112efab9..be99d463dcc 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -104,7 +104,7 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive)
 	u8 stat = 0, dma_stat = 0;
 
 	dma_stat = hwif->dma_ops->dma_end(drive);
-	stat = hwif->read_status(hwif);
+	stat = hwif->tp_ops->read_status(hwif);
 
 	if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) {
 		if (!dma_stat) {
@@ -335,7 +335,7 @@ static int config_drive_for_dma (ide_drive_t *drive)
 static int dma_timer_expiry (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	u8 dma_stat		= hwif->read_sff_dma_status(hwif);
+	u8 dma_stat		= hwif->tp_ops->read_sff_dma_status(hwif);
 
 	printk(KERN_WARNING "%s: dma_timer_expiry: dma status == 0x%02x\n",
 		drive->name, dma_stat);
@@ -370,7 +370,7 @@ void ide_dma_host_set(ide_drive_t *drive, int on)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	u8 unit			= (drive->select.b.unit & 0x01);
-	u8 dma_stat		= hwif->read_sff_dma_status(hwif);
+	u8 dma_stat		= hwif->tp_ops->read_sff_dma_status(hwif);
 
 	if (on)
 		dma_stat |= (1 << (5 + unit));
@@ -482,7 +482,7 @@ int ide_dma_setup(ide_drive_t *drive)
 		outb(reading, hwif->dma_base + ATA_DMA_CMD);
 
 	/* read DMA status for INTR & ERROR flags */
-	dma_stat = hwif->read_sff_dma_status(hwif);
+	dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
 
 	/* clear INTR & ERROR flags */
 	if (mmio)
@@ -551,7 +551,7 @@ int __ide_dma_end (ide_drive_t *drive)
 	}
 
 	/* get DMA status */
-	dma_stat = hwif->read_sff_dma_status(hwif);
+	dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
 
 	if (mmio)
 		/* clear the INTR & ERROR bits */
@@ -574,7 +574,7 @@ EXPORT_SYMBOL(__ide_dma_end);
 int ide_dma_test_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	u8 dma_stat		= hwif->read_sff_dma_status(hwif);
+	u8 dma_stat		= hwif->tp_ops->read_sff_dma_status(hwif);
 
 	/* return 1 if INTR asserted */
 	if ((dma_stat & 4) == 4)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 6f5294cfff2..62be2b27f23 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -247,9 +247,9 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 
 		data = bvec_kmap_irq(bvec, &flags);
 		if (direction)
-			hwif->output_data(drive, NULL, data, count);
+			hwif->tp_ops->output_data(drive, NULL, data, count);
 		else
-			hwif->input_data(drive, NULL, data, count);
+			hwif->tp_ops->input_data(drive, NULL, data, count);
 		bvec_kunmap_irq(data, &flags);
 
 		bcount -= count;
@@ -402,7 +402,7 @@ static int idefloppy_transfer_pc(ide_drive_t *drive)
 	idefloppy_floppy_t *floppy = drive->driver_data;
 
 	/* Send the actual packet */
-	drive->hwif->output_data(drive, NULL, floppy->pc->c, 12);
+	drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12);
 
 	/* Timeout for the packet command */
 	return IDEFLOPPY_WAIT_CMD;
@@ -954,7 +954,7 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
 		u8 stat;
 
 		local_irq_save(flags);
-		stat = hwif->read_status(hwif);
+		stat = hwif->tp_ops->read_status(hwif);
 		local_irq_restore(flags);
 
 		progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index bbd7bd4c48e..a896a283f27 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -330,7 +330,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
 			tf->error = err;
 			tf->status = stat;
 
-			drive->hwif->tf_read(drive, task);
+			drive->hwif->tp_ops->tf_read(drive, task);
 
 			if (task->tf_flags & IDE_TFLAG_DYN)
 				kfree(task);
@@ -381,7 +381,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
 		if (err == ABRT_ERR) {
 			if (drive->select.b.lba &&
 			    /* some newer drives don't support WIN_SPECIFY */
-			    hwif->read_status(hwif) == WIN_SPECIFY)
+			    hwif->tp_ops->read_status(hwif) == WIN_SPECIFY)
 				return ide_stopped;
 		} else if ((err & BAD_CRC) == BAD_CRC) {
 			/* UDMA crc error, just retry the operation */
@@ -407,7 +407,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
 		return ide_stopped;
 	}
 
-	if (hwif->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+	if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
 		rq->errors |= ERROR_RESET;
 
 	if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
@@ -434,9 +434,9 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u
 		/* add decoding error stuff */
 	}
 
-	if (hwif->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+	if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
 		/* force an abort */
-		hwif->exec_command(hwif, WIN_IDLEIMMEDIATE);
+		hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE);
 
 	if (rq->errors >= ERROR_MAX) {
 		ide_kill_rq(drive, rq);
@@ -710,7 +710,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
 #ifdef DEBUG
  	printk("%s: DRIVE_CMD (null)\n", drive->name);
 #endif
-	ide_end_drive_cmd(drive, hwif->read_status(hwif),
+	ide_end_drive_cmd(drive, hwif->tp_ops->read_status(hwif),
 			  ide_read_error(drive));
 
  	return ide_stopped;
@@ -755,7 +755,7 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 		if (rc)
 			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
 		SELECT_DRIVE(drive);
-		hwif->set_irq(hwif, 1);
+		hwif->tp_ops->set_irq(hwif, 1);
 		rc = ide_wait_not_busy(hwif, 100000);
 		if (rc)
 			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
@@ -1042,7 +1042,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 			 * quirk_list may not like intr setups/cleanups
 			 */
 			if (drive->quirk_list != 1)
-				hwif->set_irq(hwif, 0);
+				hwif->tp_ops->set_irq(hwif, 0);
 		}
 		hwgroup->hwif = hwif;
 		hwgroup->drive = drive;
@@ -1142,7 +1142,7 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
 		printk(KERN_WARNING "%s: DMA timeout error\n", drive->name);
 		(void)hwif->dma_ops->dma_end(drive);
 		ret = ide_error(drive, "dma timeout error",
-				hwif->read_status(hwif));
+				hwif->tp_ops->read_status(hwif));
 	} else {
 		printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
 		hwif->dma_ops->dma_timeout(drive);
@@ -1267,7 +1267,7 @@ void ide_timer_expiry (unsigned long data)
 				} else
 					startstop =
 					ide_error(drive, "irq timeout",
-						  hwif->read_status(hwif));
+						  hwif->tp_ops->read_status(hwif));
 			}
 			drive->service_time = jiffies - drive->service_start;
 			spin_lock_irq(&ide_lock);
@@ -1323,7 +1323,7 @@ static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup)
 	 */
 	do {
 		if (hwif->irq == irq) {
-			stat = hwif->read_status(hwif);
+			stat = hwif->tp_ops->read_status(hwif);
 
 			if (!OK_STAT(stat, READY_STAT, BAD_STAT)) {
 				/* Try to not flood the console with msgs */
@@ -1414,7 +1414,7 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 			 * Whack the status register, just in case
 			 * we have a leftover pending IRQ.
 			 */
-			(void)hwif->read_status(hwif);
+			(void)hwif->tp_ops->read_status(hwif);
 #endif /* CONFIG_BLK_DEV_IDEPCI */
 		}
 		spin_unlock_irqrestore(&ide_lock, flags);
@@ -1531,9 +1531,9 @@ void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
 	task.tf.lbah    = (bcount >> 8) & 0xff;
 
 	ide_tf_dump(drive->name, &task.tf);
-	hwif->set_irq(hwif, 1);
+	hwif->tp_ops->set_irq(hwif, 1);
 	SELECT_MASK(drive, 0);
-	hwif->tf_load(drive, &task);
+	hwif->tp_ops->tf_load(drive, &task);
 }
 
 EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
@@ -1545,9 +1545,9 @@ void ide_pad_transfer(ide_drive_t *drive, int write, int len)
 
 	while (len > 0) {
 		if (write)
-			hwif->output_data(drive, NULL, buf, min(4, len));
+			hwif->tp_ops->output_data(drive, NULL, buf, min(4, len));
 		else
-			hwif->input_data(drive, NULL, buf, min(4, len));
+			hwif->tp_ops->input_data(drive, NULL, buf, min(4, len));
 		len -= 4;
 	}
 }
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c9d15be4c48..07da5fb9eaf 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -68,7 +68,7 @@ void SELECT_DRIVE (ide_drive_t *drive)
 	memset(&task, 0, sizeof(task));
 	task.tf_flags = IDE_TFLAG_OUT_DEVICE;
 
-	drive->hwif->tf_load(drive, &task);
+	drive->hwif->tp_ops->tf_load(drive, &task);
 }
 
 void SELECT_MASK(ide_drive_t *drive, int mask)
@@ -79,39 +79,43 @@ void SELECT_MASK(ide_drive_t *drive, int mask)
 		port_ops->maskproc(drive, mask);
 }
 
-static void ide_exec_command(ide_hwif_t *hwif, u8 cmd)
+void ide_exec_command(ide_hwif_t *hwif, u8 cmd)
 {
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
 		writeb(cmd, (void __iomem *)hwif->io_ports.command_addr);
 	else
 		outb(cmd, hwif->io_ports.command_addr);
 }
+EXPORT_SYMBOL_GPL(ide_exec_command);
 
-static u8 ide_read_status(ide_hwif_t *hwif)
+u8 ide_read_status(ide_hwif_t *hwif)
 {
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
 		return readb((void __iomem *)hwif->io_ports.status_addr);
 	else
 		return inb(hwif->io_ports.status_addr);
 }
+EXPORT_SYMBOL_GPL(ide_read_status);
 
-static u8 ide_read_altstatus(ide_hwif_t *hwif)
+u8 ide_read_altstatus(ide_hwif_t *hwif)
 {
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
 		return readb((void __iomem *)hwif->io_ports.ctl_addr);
 	else
 		return inb(hwif->io_ports.ctl_addr);
 }
+EXPORT_SYMBOL_GPL(ide_read_altstatus);
 
-static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
+u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
 {
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
 		return readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
 	else
 		return inb(hwif->dma_base + ATA_DMA_STATUS);
 }
+EXPORT_SYMBOL_GPL(ide_read_sff_dma_status);
 
-static void ide_set_irq(ide_hwif_t *hwif, int on)
+void ide_set_irq(ide_hwif_t *hwif, int on)
 {
 	u8 ctl = ATA_DEVCTL_OBS;
 
@@ -127,8 +131,9 @@ static void ide_set_irq(ide_hwif_t *hwif, int on)
 	else
 		outb(ctl, hwif->io_ports.ctl_addr);
 }
+EXPORT_SYMBOL_GPL(ide_set_irq);
 
-static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct ide_io_ports *io_ports = &hwif->io_ports;
@@ -180,8 +185,9 @@ static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
 		tf_outb((tf->device & HIHI) | drive->select.all,
 			 io_ports->device_addr);
 }
+EXPORT_SYMBOL_GPL(ide_tf_load);
 
-static void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct ide_io_ports *io_ports = &hwif->io_ports;
@@ -241,6 +247,7 @@ static void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
 			tf->hob_lbah    = tf_inb(io_ports->lbah_addr);
 	}
 }
+EXPORT_SYMBOL_GPL(ide_tf_read);
 
 /*
  * Some localbus EIDE interfaces require a special access sequence
@@ -263,8 +270,8 @@ static void ata_vlb_sync(unsigned long port)
  * so if an odd len is specified, be sure that there's at least one
  * extra byte allocated for the buffer.
  */
-static void ata_input_data(ide_drive_t *drive, struct request *rq,
-			   void *buf, unsigned int len)
+void ide_input_data(ide_drive_t *drive, struct request *rq, void *buf,
+		    unsigned int len)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct ide_io_ports *io_ports = &hwif->io_ports;
@@ -304,12 +311,13 @@ static void ata_input_data(ide_drive_t *drive, struct request *rq,
 			insw(data_addr, buf, len / 2);
 	}
 }
+EXPORT_SYMBOL_GPL(ide_input_data);
 
 /*
  * This is used for most PIO data transfers *to* the IDE interface
  */
-static void ata_output_data(ide_drive_t *drive, struct request *rq,
-			    void *buf, unsigned int len)
+void ide_output_data(ide_drive_t *drive, struct request *rq, void *buf,
+		     unsigned int len)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct ide_io_ports *io_ports = &hwif->io_ports;
@@ -347,22 +355,7 @@ static void ata_output_data(ide_drive_t *drive, struct request *rq,
 			outsw(data_addr, buf, len / 2);
 	}
 }
-
-void default_hwif_transport(ide_hwif_t *hwif)
-{
-	hwif->exec_command	  = ide_exec_command;
-	hwif->read_status	  = ide_read_status;
-	hwif->read_altstatus	  = ide_read_altstatus;
-	hwif->read_sff_dma_status = ide_read_sff_dma_status;
-
-	hwif->set_irq	  = ide_set_irq;
-
-	hwif->tf_load	  = ide_tf_load;
-	hwif->tf_read	  = ide_tf_read;
-
-	hwif->input_data  = ata_input_data;
-	hwif->output_data = ata_output_data;
-}
+EXPORT_SYMBOL_GPL(ide_output_data);
 
 u8 ide_read_error(ide_drive_t *drive)
 {
@@ -371,7 +364,7 @@ u8 ide_read_error(ide_drive_t *drive)
 	memset(&task, 0, sizeof(task));
 	task.tf_flags = IDE_TFLAG_IN_FEATURE;
 
-	drive->hwif->tf_read(drive, &task);
+	drive->hwif->tp_ops->tf_read(drive, &task);
 
 	return task.tf.error;
 }
@@ -385,13 +378,28 @@ void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
 	task.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM |
 			IDE_TFLAG_IN_NSECT;
 
-	drive->hwif->tf_read(drive, &task);
+	drive->hwif->tp_ops->tf_read(drive, &task);
 
 	*bcount = (task.tf.lbah << 8) | task.tf.lbam;
 	*ireason = task.tf.nsect & 3;
 }
 EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);
 
+const struct ide_tp_ops default_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
+};
+
 void ide_fix_driveid (struct hd_driveid *id)
 {
 #ifndef __LITTLE_ENDIAN
@@ -545,10 +553,10 @@ int drive_is_ready (ide_drive_t *drive)
 	 * about possible isa-pnp and pci-pnp issues yet.
 	 */
 	if (hwif->io_ports.ctl_addr)
-		stat = hwif->read_altstatus(hwif);
+		stat = hwif->tp_ops->read_altstatus(hwif);
 	else
 		/* Note: this may clear a pending IRQ!! */
-		stat = hwif->read_status(hwif);
+		stat = hwif->tp_ops->read_status(hwif);
 
 	if (stat & BUSY_STAT)
 		/* drive busy:  definitely not interrupting */
@@ -574,24 +582,25 @@ EXPORT_SYMBOL(drive_is_ready);
 static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
 {
 	ide_hwif_t *hwif = drive->hwif;
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	unsigned long flags;
 	int i;
 	u8 stat;
 
 	udelay(1);	/* spec allows drive 400ns to assert "BUSY" */
-	stat = hwif->read_status(hwif);
+	stat = tp_ops->read_status(hwif);
 
 	if (stat & BUSY_STAT) {
 		local_irq_set(flags);
 		timeout += jiffies;
-		while ((stat = hwif->read_status(hwif)) & BUSY_STAT) {
+		while ((stat = tp_ops->read_status(hwif)) & BUSY_STAT) {
 			if (time_after(jiffies, timeout)) {
 				/*
 				 * One last read after the timeout in case
 				 * heavy interrupt load made us not make any
 				 * progress during the timeout..
 				 */
-				stat = hwif->read_status(hwif);
+				stat = tp_ops->read_status(hwif);
 				if (!(stat & BUSY_STAT))
 					break;
 
@@ -611,7 +620,7 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti
 	 */
 	for (i = 0; i < 10; i++) {
 		udelay(1);
-		stat = hwif->read_status(hwif);
+		stat = tp_ops->read_status(hwif);
 
 		if (OK_STAT(stat, good, bad)) {
 			*rstat = stat;
@@ -737,6 +746,7 @@ no_80w:
 int ide_driveid_update(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	struct hd_driveid *id;
 	unsigned long timeout, flags;
 	u8 stat;
@@ -747,9 +757,9 @@ int ide_driveid_update(ide_drive_t *drive)
 	 */
 
 	SELECT_MASK(drive, 1);
-	hwif->set_irq(hwif, 0);
+	tp_ops->set_irq(hwif, 0);
 	msleep(50);
-	hwif->exec_command(hwif, WIN_IDENTIFY);
+	tp_ops->exec_command(hwif, WIN_IDENTIFY);
 	timeout = jiffies + WAIT_WORSTCASE;
 	do {
 		if (time_after(jiffies, timeout)) {
@@ -758,11 +768,11 @@ int ide_driveid_update(ide_drive_t *drive)
 		}
 
 		msleep(50);	/* give drive a breather */
-		stat = hwif->read_altstatus(hwif);
+		stat = tp_ops->read_altstatus(hwif);
 	} while (stat & BUSY_STAT);
 
 	msleep(50);	/* wait for IRQ and DRQ_STAT */
-	stat = hwif->read_status(hwif);
+	stat = tp_ops->read_status(hwif);
 
 	if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
 		SELECT_MASK(drive, 0);
@@ -776,8 +786,8 @@ int ide_driveid_update(ide_drive_t *drive)
 		local_irq_restore(flags);
 		return 0;
 	}
-	hwif->input_data(drive, NULL, id, SECTOR_SIZE);
-	(void)hwif->read_status(hwif);	/* clear drive IRQ */
+	tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);
+	(void)tp_ops->read_status(hwif);	/* clear drive IRQ */
 	local_irq_enable();
 	local_irq_restore(flags);
 	ide_fix_driveid(id);
@@ -798,6 +808,7 @@ int ide_driveid_update(ide_drive_t *drive)
 int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 {
 	ide_hwif_t *hwif = drive->hwif;
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	int error = 0;
 	u8 stat;
 	ide_task_t task;
@@ -833,19 +844,19 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 	SELECT_DRIVE(drive);
 	SELECT_MASK(drive, 0);
 	udelay(1);
-	hwif->set_irq(hwif, 0);
+	tp_ops->set_irq(hwif, 0);
 
 	memset(&task, 0, sizeof(task));
 	task.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT;
 	task.tf.feature = SETFEATURES_XFER;
 	task.tf.nsect   = speed;
 
-	hwif->tf_load(drive, &task);
+	tp_ops->tf_load(drive, &task);
 
-	hwif->exec_command(hwif, WIN_SETFEATURES);
+	tp_ops->exec_command(hwif, WIN_SETFEATURES);
 
 	if (drive->quirk_list == 2)
-		hwif->set_irq(hwif, 1);
+		tp_ops->set_irq(hwif, 1);
 
 	error = __ide_wait_stat(drive, drive->ready_stat,
 				BUSY_STAT|DRQ_STAT|ERR_STAT,
@@ -950,7 +961,7 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
 
 	spin_lock_irqsave(&ide_lock, flags);
 	__ide_set_handler(drive, handler, timeout, expiry);
-	hwif->exec_command(hwif, cmd);
+	hwif->tp_ops->exec_command(hwif, cmd);
 	/*
 	 * Drive takes 400nS to respond, we must avoid the IRQ being
 	 * serviced before that.
@@ -968,7 +979,7 @@ void ide_execute_pkt_cmd(ide_drive_t *drive)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ide_lock, flags);
-	hwif->exec_command(hwif, WIN_PACKETCMD);
+	hwif->tp_ops->exec_command(hwif, WIN_PACKETCMD);
 	ndelay(400);
 	spin_unlock_irqrestore(&ide_lock, flags);
 }
@@ -999,7 +1010,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive)
 
 	SELECT_DRIVE(drive);
 	udelay (10);
-	stat = hwif->read_status(hwif);
+	stat = hwif->tp_ops->read_status(hwif);
 
 	if (OK_STAT(stat, 0, BUSY_STAT))
 		printk("%s: ATAPI reset complete\n", drive->name);
@@ -1045,7 +1056,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
 		}
 	}
 
-	tmp = hwif->read_status(hwif);
+	tmp = hwif->tp_ops->read_status(hwif);
 
 	if (!OK_STAT(tmp, 0, BUSY_STAT)) {
 		if (time_before(jiffies, hwgroup->poll_timeout)) {
@@ -1159,6 +1170,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
 	ide_hwif_t *hwif;
 	ide_hwgroup_t *hwgroup;
 	struct ide_io_ports *io_ports;
+	const struct ide_tp_ops *tp_ops;
 	const struct ide_port_ops *port_ops;
 
 	spin_lock_irqsave(&ide_lock, flags);
@@ -1167,6 +1179,8 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
 
 	io_ports = &hwif->io_ports;
 
+	tp_ops = hwif->tp_ops;
+
 	/* We must not reset with running handlers */
 	BUG_ON(hwgroup->handler != NULL);
 
@@ -1175,7 +1189,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
 		pre_reset(drive);
 		SELECT_DRIVE(drive);
 		udelay (20);
-		hwif->exec_command(hwif, WIN_SRST);
+		tp_ops->exec_command(hwif, WIN_SRST);
 		ndelay(400);
 		hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
 		hwgroup->polling = 1;
@@ -1208,11 +1222,11 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
 	 * TODO: add ->softreset method and stop abusing ->set_irq
 	 */
 	/* set SRST and nIEN */
-	hwif->set_irq(hwif, 4);
+	tp_ops->set_irq(hwif, 4);
 	/* more than enough time */
 	udelay(10);
 	/* clear SRST, leave nIEN (unless device is on the quirk list) */
-	hwif->set_irq(hwif, drive->quirk_list == 2);
+	tp_ops->set_irq(hwif, drive->quirk_list == 2);
 	/* more than enough time */
 	udelay(10);
 	hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
@@ -1257,7 +1271,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
 		 * about locking issues (2.5 work ?).
 		 */
 		mdelay(1);
-		stat = hwif->read_status(hwif);
+		stat = hwif->tp_ops->read_status(hwif);
 		if ((stat & BUSY_STAT) == 0)
 			return 0;
 		/*
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 7ac44d51547..97fefabea8b 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -325,7 +325,7 @@ static void ide_dump_sector(ide_drive_t *drive)
 	else
 		task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE;
 
-	drive->hwif->tf_read(drive, &task);
+	drive->hwif->tp_ops->tf_read(drive, &task);
 
 	if (lba48 || (tf->device & ATA_LBA))
 		printk(", LBAsect=%llu",
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 3cc8ade2cc4..c588066295d 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -126,7 +126,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 
 	id = drive->id;
 	/* read 512 bytes of id info */
-	hwif->input_data(drive, NULL, id, SECTOR_SIZE);
+	hwif->tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);
 
 	drive->id_read = 1;
 	local_irq_enable();
@@ -267,6 +267,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 {
 	ide_hwif_t *hwif = HWIF(drive);
 	struct ide_io_ports *io_ports = &hwif->io_ports;
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	int use_altstatus = 0, rc;
 	unsigned long timeout;
 	u8 s = 0, a = 0;
@@ -275,8 +276,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 	msleep(50);
 
 	if (io_ports->ctl_addr) {
-		a = hwif->read_altstatus(hwif);
-		s = hwif->read_status(hwif);
+		a = tp_ops->read_altstatus(hwif);
+		s = tp_ops->read_status(hwif);
 		if ((a ^ s) & ~INDEX_STAT)
 			/* ancient Seagate drives, broken interfaces */
 			printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
@@ -297,11 +298,11 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 		/* disable DMA & overlap */
 		task.tf_flags = IDE_TFLAG_OUT_FEATURE;
 
-		drive->hwif->tf_load(drive, &task);
+		tp_ops->tf_load(drive, &task);
 	}
 
 	/* ask drive for ID */
-	hwif->exec_command(hwif, cmd);
+	tp_ops->exec_command(hwif, cmd);
 
 	timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
 	timeout += jiffies;
@@ -312,13 +313,13 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 		}
 		/* give drive a breather */
 		msleep(50);
-		s = use_altstatus ? hwif->read_altstatus(hwif)
-				  : hwif->read_status(hwif);
+		s = use_altstatus ? tp_ops->read_altstatus(hwif)
+				  : tp_ops->read_status(hwif);
 	} while (s & BUSY_STAT);
 
 	/* wait for IRQ and DRQ_STAT */
 	msleep(50);
-	s = hwif->read_status(hwif);
+	s = tp_ops->read_status(hwif);
 
 	if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) {
 		unsigned long flags;
@@ -330,7 +331,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 		/* drive responded with ID */
 		rc = 0;
 		/* clear drive IRQ */
-		(void)hwif->read_status(hwif);
+		(void)tp_ops->read_status(hwif);
 		local_irq_restore(flags);
 	} else {
 		/* drive refused ID */
@@ -352,6 +353,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 static int try_to_identify (ide_drive_t *drive, u8 cmd)
 {
 	ide_hwif_t *hwif = HWIF(drive);
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	int retval;
 	int autoprobe = 0;
 	unsigned long cookie = 0;
@@ -367,7 +369,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
 			autoprobe = 1;
 			cookie = probe_irq_on();
 		}
-		hwif->set_irq(hwif, autoprobe);
+		tp_ops->set_irq(hwif, autoprobe);
 	}
 
 	retval = actual_try_to_identify(drive, cmd);
@@ -375,9 +377,9 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
 	if (autoprobe) {
 		int irq;
 
-		hwif->set_irq(hwif, 0);
+		tp_ops->set_irq(hwif, 0);
 		/* clear drive IRQ */
-		(void)hwif->read_status(hwif);
+		(void)tp_ops->read_status(hwif);
 		udelay(5);
 		irq = probe_irq_off(cookie);
 		if (!hwif->irq) {
@@ -402,7 +404,7 @@ static int ide_busy_sleep(ide_hwif_t *hwif)
 
 	do {
 		msleep(50);
-		stat = hwif->read_status(hwif);
+		stat = hwif->tp_ops->read_status(hwif);
 		if ((stat & BUSY_STAT) == 0)
 			return 0;
 	} while (time_before(jiffies, timeout));
@@ -417,7 +419,7 @@ static u8 ide_read_device(ide_drive_t *drive)
 	memset(&task, 0, sizeof(task));
 	task.tf_flags = IDE_TFLAG_IN_DEVICE;
 
-	drive->hwif->tf_read(drive, &task);
+	drive->hwif->tp_ops->tf_read(drive, &task);
 
 	return task.tf.device;
 }
@@ -446,6 +448,7 @@ static u8 ide_read_device(ide_drive_t *drive)
 static int do_probe (ide_drive_t *drive, u8 cmd)
 {
 	ide_hwif_t *hwif = HWIF(drive);
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	int rc;
 	u8 stat;
 
@@ -478,7 +481,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 		return 3;
 	}
 
-	stat = hwif->read_status(hwif);
+	stat = tp_ops->read_status(hwif);
 
 	if (OK_STAT(stat, READY_STAT, BUSY_STAT) ||
 	    drive->present || cmd == WIN_PIDENTIFY) {
@@ -488,7 +491,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			rc = try_to_identify(drive,cmd);
 		}
 
-		stat = hwif->read_status(hwif);
+		stat = tp_ops->read_status(hwif);
 
 		if (stat == (BUSY_STAT | READY_STAT))
 			return 4;
@@ -499,13 +502,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			msleep(50);
 			SELECT_DRIVE(drive);
 			msleep(50);
-			hwif->exec_command(hwif, WIN_SRST);
+			tp_ops->exec_command(hwif, WIN_SRST);
 			(void)ide_busy_sleep(hwif);
 			rc = try_to_identify(drive, cmd);
 		}
 
 		/* ensure drive IRQ is clear */
-		stat = hwif->read_status(hwif);
+		stat = tp_ops->read_status(hwif);
 
 		if (rc == 1)
 			printk(KERN_ERR "%s: no response (status = 0x%02x)\n",
@@ -519,7 +522,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 		SELECT_DRIVE(&hwif->drives[0]);
 		msleep(50);
 		/* ensure drive irq is clear */
-		(void)hwif->read_status(hwif);
+		(void)tp_ops->read_status(hwif);
 	}
 	return rc;
 }
@@ -530,12 +533,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 static void enable_nest (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = HWIF(drive);
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	u8 stat;
 
 	printk("%s: enabling %s -- ", hwif->name, drive->id->model);
 	SELECT_DRIVE(drive);
 	msleep(50);
-	hwif->exec_command(hwif, EXABYTE_ENABLE_NEST);
+	tp_ops->exec_command(hwif, EXABYTE_ENABLE_NEST);
 
 	if (ide_busy_sleep(hwif)) {
 		printk(KERN_CONT "failed (timeout)\n");
@@ -544,7 +548,7 @@ static void enable_nest (ide_drive_t *drive)
 
 	msleep(50);
 
-	stat = hwif->read_status(hwif);
+	stat = tp_ops->read_status(hwif);
 
 	if (!OK_STAT(stat, 0, BAD_STAT))
 		printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
@@ -726,7 +730,7 @@ static int ide_port_wait_ready(ide_hwif_t *hwif)
 		/* Ignore disks that we will not probe for later. */
 		if (!drive->noprobe || drive->present) {
 			SELECT_DRIVE(drive);
-			hwif->set_irq(hwif, 1);
+			hwif->tp_ops->set_irq(hwif, 1);
 			mdelay(2);
 			rc = ide_wait_not_busy(hwif, 35000);
 			if (rc)
@@ -1083,7 +1087,7 @@ static int init_irq (ide_hwif_t *hwif)
 			sa = IRQF_SHARED;
 
 		if (io_ports->ctl_addr)
-			hwif->set_irq(hwif, 1);
+			hwif->tp_ops->set_irq(hwif, 1);
 
 		if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup))
 	       		goto out_unlink;
@@ -1361,6 +1365,9 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
 	hwif->host_flags |= d->host_flags;
 	hwif->pio_mask = d->pio_mask;
 
+	if (d->tp_ops)
+		hwif->tp_ops = d->tp_ops;
+
 	/* ->set_pio_mode for DTC2278 is currently limited to port 0 */
 	if (hwif->chipset != ide_dtc2278 || hwif->channel == 0)
 		hwif->port_ops = d->port_ops;
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index ef54728a74b..0af128826f1 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -398,7 +398,7 @@ static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 		count = min(
 			(unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
 			bcount);
-		drive->hwif->input_data(drive, NULL, bh->b_data +
+		drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data +
 					atomic_read(&bh->b_count), count);
 		bcount -= count;
 		atomic_add(count, &bh->b_count);
@@ -424,7 +424,7 @@ static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 			return;
 		}
 		count = min((unsigned int)pc->b_count, (unsigned int)bcount);
-		drive->hwif->output_data(drive, NULL, pc->b_data, count);
+		drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count);
 		bcount -= count;
 		pc->b_data += count;
 		pc->b_count -= count;
@@ -932,7 +932,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
 	struct ide_atapi_pc *pc = tape->pc;
 	u8 stat;
 
-	stat = hwif->read_status(hwif);
+	stat = hwif->tp_ops->read_status(hwif);
 
 	if (stat & SEEK_STAT) {
 		if (stat & ERR_STAT) {
@@ -1019,7 +1019,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	 * If the tape is still busy, postpone our request and service
 	 * the other device meanwhile.
 	 */
-	stat = hwif->read_status(hwif);
+	stat = hwif->tp_ops->read_status(hwif);
 
 	if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
 		set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index ea345369553..aeddbbd69e8 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -64,6 +64,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct ide_taskfile *tf = &task->tf;
 	ide_handler_t *handler = NULL;
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	const struct ide_dma_ops *dma_ops = hwif->dma_ops;
 
 	if (task->data_phase == TASKFILE_MULTI_IN ||
@@ -80,15 +81,15 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
 
 	if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
 		ide_tf_dump(drive->name, tf);
-		hwif->set_irq(hwif, 1);
+		tp_ops->set_irq(hwif, 1);
 		SELECT_MASK(drive, 0);
-		hwif->tf_load(drive, task);
+		tp_ops->tf_load(drive, task);
 	}
 
 	switch (task->data_phase) {
 	case TASKFILE_MULTI_OUT:
 	case TASKFILE_OUT:
-		hwif->exec_command(hwif, tf->command);
+		tp_ops->exec_command(hwif, tf->command);
 		ndelay(400);	/* FIXME */
 		return pre_task_out_intr(drive, task->rq);
 	case TASKFILE_MULTI_IN:
@@ -125,7 +126,7 @@ EXPORT_SYMBOL_GPL(do_rw_taskfile);
 static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	u8 stat = hwif->read_status(hwif);
+	u8 stat = hwif->tp_ops->read_status(hwif);
 
 	if (OK_STAT(stat, READY_STAT, BAD_STAT))
 		drive->mult_count = drive->mult_req;
@@ -146,8 +147,12 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
 	int retries = 5;
 	u8 stat;
 
-	while (((stat = hwif->read_status(hwif)) & BUSY_STAT) && retries--)
+	while (1) {
+		stat = hwif->tp_ops->read_status(hwif);
+		if ((stat & BUSY_STAT) == 0 || retries-- == 0)
+			break;
 		udelay(10);
+	};
 
 	if (OK_STAT(stat, READY_STAT, BAD_STAT))
 		return ide_stopped;
@@ -165,7 +170,7 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
 static ide_startstop_t recal_intr(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	u8 stat = hwif->read_status(hwif);
+	u8 stat = hwif->tp_ops->read_status(hwif);
 
 	if (!OK_STAT(stat, READY_STAT, BAD_STAT))
 		return ide_error(drive, "recal_intr", stat);
@@ -182,7 +187,7 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
 	u8 stat;
 
 	local_irq_enable_in_hardirq();
-	stat = hwif->read_status(hwif);
+	stat = hwif->tp_ops->read_status(hwif);
 
 	if (!OK_STAT(stat, READY_STAT, BAD_STAT))
 		return ide_error(drive, "task_no_data_intr", stat);
@@ -205,7 +210,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
 	 * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
 	 */
 	for (retries = 0; retries < 1000; retries++) {
-		stat = hwif->read_status(hwif);
+		stat = hwif->tp_ops->read_status(hwif);
 
 		if (stat & BUSY_STAT)
 			udelay(10);
@@ -260,9 +265,9 @@ static void ide_pio_sector(ide_drive_t *drive, struct request *rq,
 
 	/* do the actual data transfer */
 	if (write)
-		hwif->output_data(drive, rq, buf, SECTOR_SIZE);
+		hwif->tp_ops->output_data(drive, rq, buf, SECTOR_SIZE);
 	else
-		hwif->input_data(drive, rq, buf, SECTOR_SIZE);
+		hwif->tp_ops->input_data(drive, rq, buf, SECTOR_SIZE);
 
 	kunmap_atomic(buf, KM_BIO_SRC_IRQ);
 #ifdef CONFIG_HIGHMEM
@@ -389,7 +394,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq = hwif->hwgroup->rq;
-	u8 stat = hwif->read_status(hwif);
+	u8 stat = hwif->tp_ops->read_status(hwif);
 
 	/* Error? */
 	if (stat & ERR_STAT)
@@ -423,7 +428,7 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq = HWGROUP(drive)->rq;
-	u8 stat = hwif->read_status(hwif);
+	u8 stat = hwif->tp_ops->read_status(hwif);
 
 	if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat))
 		return task_error(drive, rq, __func__, stat);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 961f31c648c..132b504168e 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -101,7 +101,7 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
 
 	init_completion(&hwif->gendev_rel_comp);
 
-	default_hwif_transport(hwif);
+	hwif->tp_ops = &default_tp_ops;
 
 	ide_port_init_devices_data(hwif);
 }
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 1bb2aa72cc7..3e2c6125f03 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -66,6 +66,27 @@ static void falconide_output_data(ide_drive_t *drive, struct request *rq,
 	outsw_swapw(data_addr, buf, (len + 1) / 2);
 }
 
+/* Atari has a byte-swapped IDE interface */
+static const struct ide_tp_ops falconide_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= falconide_input_data,
+	.output_data		= falconide_output_data,
+};
+
+static const struct ide_port_info falconide_port_info = {
+	.tp_ops			= &falconide_tp_ops,
+	.host_flags		= IDE_HFLAG_NO_DMA,
+};
+
 static void __init falconide_setup_ports(hw_regs_t *hw)
 {
 	int i;
@@ -111,12 +132,8 @@ static int __init falconide_init(void)
 		u8 index = hwif->index;
 		u8 idx[4] = { index, 0xff, 0xff, 0xff };
 
-		/* Atari has a byte-swapped IDE interface */
-		hwif->input_data  = falconide_input_data;
-		hwif->output_data = falconide_output_data;
-
 		ide_get_lock(NULL, NULL);
-		ide_device_add(idx, NULL, hws);
+		ide_device_add(idx, &falconide_port_info, hws);
 		ide_release_lock();
 	}
 
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index fcb04b8b023..2dc306f852a 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -96,6 +96,27 @@ static void q40ide_output_data(ide_drive_t *drive, struct request *rq,
 	outsw_swapw(data_addr, buf, (len + 1) / 2);
 }
 
+/* Q40 has a byte-swapped IDE interface */
+static const struct ide_tp_ops q40ide_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= q40ide_input_data,
+	.output_data		= q40ide_output_data,
+};
+
+static const struct ide_port_info q40ide_port_info = {
+	.tp_ops			= &q40ide_tp_ops,
+	.host_flags		= IDE_HFLAG_NO_DMA,
+};
+
 /* 
  * the static array is needed to have the name reported in /proc/ioports,
  * hwif->name unfortunately isn't available yet
@@ -141,16 +162,12 @@ static int __init q40ide_init(void)
 	if (hwif) {
 		hwif->chipset = ide_generic;
 
-		/* Q40 has a byte-swapped IDE interface */
-		hwif->input_data  = q40ide_input_data;
-		hwif->output_data = q40ide_output_data;
-
 		hws[i] = &hw[i];
 		idx[i] = hwif->index;
 	}
     }
 
-    ide_device_add(idx, NULL, hws);
+    ide_device_add(idx, &q40ide_port_info, hws);
 
     return 0;
 }
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 475da582fd8..ed1c9a13407 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -519,6 +519,23 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
 	*ata_regs = ahwif->regbase + (14 << IDE_REG_SHIFT);
 }
 
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+static const struct ide_tp_ops au1xxx_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= au1xxx_input_data,
+	.output_data		= au1xxx_output_data,
+};
+#endif
+
 static const struct ide_port_ops au1xxx_port_ops = {
 	.set_pio_mode		= au1xxx_set_pio_mode,
 	.set_dma_mode		= auide_set_dma_mode,
@@ -526,6 +543,9 @@ static const struct ide_port_ops au1xxx_port_ops = {
 
 static const struct ide_port_info au1xxx_port_info = {
 	.init_dma		= auide_ddma_init,
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+	.tp_ops			= &au1xxx_tp_ops,
+#endif
 	.port_ops		= &au1xxx_port_ops,
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 	.dma_ops		= &au1xxx_dma_ops,
@@ -596,15 +616,6 @@ static int au_ide_probe(struct device *dev)
 	hw.dev = dev;
 	hw.chipset = ide_au1xxx;
 
-	/* If the user has selected DDMA assisted copies,
-	   then set up a few local I/O function entry points 
-	*/
-
-#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA	
-	hwif->input_data  = au1xxx_input_data;
-	hwif->output_data = au1xxx_output_data;
-#endif
-
 	auide_hwif.hwif                 = hwif;
 
 	idx[0] = hwif->index;
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index 02fd3a877af..5cd2b32ff0e 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -104,7 +104,22 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
 	}
 }
 
-static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
+static const struct ide_tp_ops superio_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= superio_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= superio_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= ide_tf_load,
+	.tf_read		= superio_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
+};
+
+static void __devinit superio_init_iops(struct hwif_s *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
 	u32 dma_stat;
@@ -115,21 +130,6 @@ static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
 	/* Clear error/interrupt, enable dma */
 	tmp = superio_ide_inb(dma_stat);
 	outb(tmp | 0x66, dma_stat);
-
-	hwif->read_status	  = superio_read_status;
-	hwif->read_sff_dma_status = superio_read_sff_dma_status;
-
-	hwif->tf_read = superio_tf_read;
-
-}
-
-static void __devinit init_iops_ns87415(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-
-	if (PCI_SLOT(dev->devfn) == 0xE)
-		/* Built-in - assume it's under superio. */
-		superio_ide_init_iops(hwif);
 }
 #endif
 
@@ -195,7 +195,7 @@ static int ns87415_dma_end(ide_drive_t *drive)
 	u8 dma_stat = 0, dma_cmd = 0;
 
 	drive->waiting_for_dma = 0;
-	dma_stat = hwif->read_sff_dma_status(hwif);
+	dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
 	/* get DMA command mode */
 	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	/* stop DMA */
@@ -271,7 +271,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
 		outb(8, hwif->io_ports.ctl_addr);
 		do {
 			udelay(50);
-			stat = hwif->read_status(hwif);
+			stat = hwif->tp_ops->read_status(hwif);
                 	if (stat == 0xff)
                         	break;
         	} while ((stat & BUSY_STAT) && --timeout);
@@ -306,9 +306,6 @@ static const struct ide_dma_ops ns87415_dma_ops = {
 
 static const struct ide_port_info ns87415_chipset __devinitdata = {
 	.name		= "NS87415",
-#ifdef CONFIG_SUPERIO
-	.init_iops	= init_iops_ns87415,
-#endif
 	.init_hwif	= init_hwif_ns87415,
 	.port_ops	= &ns87415_port_ops,
 	.dma_ops	= &ns87415_dma_ops,
@@ -318,7 +315,16 @@ static const struct ide_port_info ns87415_chipset __devinitdata = {
 
 static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &ns87415_chipset);
+	struct ide_port_info d = ns87415_chipset;
+
+#ifdef CONFIG_SUPERIO
+	if (PCI_SLOT(dev->devfn) == 0xE) {
+		/* Built-in - assume it's under superio. */
+		d.init_iops = superio_init_iops;
+		d.tp_ops = &superio_tp_ops;
+	}
+#endif
+	return ide_setup_pci_device(dev, &d);
 }
 
 static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 38765d9b031..5b1a0e950df 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -808,19 +808,6 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
 
 	ide_set_hwifdata(hwif, ports);
 
-	hwif->exec_command	  = scc_exec_command;
-	hwif->read_status	  = scc_read_status;
-	hwif->read_altstatus	  = scc_read_altstatus;
-	hwif->read_sff_dma_status = scc_read_sff_dma_status;
-
-	hwif->set_irq = scc_set_irq;
-
-	hwif->tf_load = scc_tf_load;
-	hwif->tf_read = scc_tf_read;
-
-	hwif->input_data  = scc_input_data;
-	hwif->output_data = scc_output_data;
-
 	hwif->dma_base = dma_base;
 	hwif->config_data = ports->ctl;
 }
@@ -872,6 +859,21 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
 		hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
 }
 
+static const struct ide_tp_ops scc_tp_ops = {
+	.exec_command		= scc_exec_command,
+	.read_status		= scc_read_status,
+	.read_altstatus		= scc_read_altstatus,
+	.read_sff_dma_status	= scc_read_sff_dma_status,
+
+	.set_irq		= scc_set_irq,
+
+	.tf_load		= scc_tf_load,
+	.tf_read		= scc_tf_read,
+
+	.input_data		= scc_input_data,
+	.output_data		= scc_output_data,
+};
+
 static const struct ide_port_ops scc_port_ops = {
 	.set_pio_mode		= scc_set_pio_mode,
 	.set_dma_mode		= scc_set_dma_mode,
@@ -895,6 +897,7 @@ static const struct ide_dma_ops scc_dma_ops = {
       .name		= name_str,			\
       .init_iops	= init_iops_scc,		\
       .init_hwif	= init_hwif_scc,		\
+      .tp_ops		= &scc_tp_ops,		\
       .port_ops		= &scc_port_ops,		\
       .dma_ops		= &scc_dma_ops,			\
       .host_flags	= IDE_HFLAG_SINGLE,		\
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 86f7c490183..5598bd5936d 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -550,6 +550,21 @@ static int sgiioc4_dma_setup(ide_drive_t *drive)
 	return 0;
 }
 
+static const struct ide_tp_ops sgiioc4_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= sgiioc4_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
+};
+
 static const struct ide_port_ops sgiioc4_port_ops = {
 	.set_dma_mode		= sgiioc4_set_dma_mode,
 	/* reset DMA engine, clear IRQs */
@@ -572,6 +587,7 @@ static const struct ide_port_info sgiioc4_port_info __devinitdata = {
 	.name			= DRV_NAME,
 	.chipset		= ide_pci,
 	.init_dma		= ide_dma_sgiioc4,
+	.tp_ops			= &sgiioc4_tp_ops,
 	.port_ops		= &sgiioc4_port_ops,
 	.dma_ops		= &sgiioc4_dma_ops,
 	.host_flags		= IDE_HFLAG_MMIO,
@@ -626,8 +642,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	hwif->read_status = sgiioc4_read_status;
-
 	idx[0] = hwif->index;
 
 	if (ide_device_add(idx, &d, hws))
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index ed073c6635a..ee557d10a76 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -974,6 +974,21 @@ static void pmac_ide_init_dev(ide_drive_t *drive)
 	}
 }
 
+static const struct ide_tp_ops pmac_tp_ops = {
+	.exec_command		= pmac_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= pmac_set_irq,
+
+	.tf_load		= ide_tf_load,
+	.tf_read		= ide_tf_read,
+
+	.input_data		= ide_input_data,
+	.output_data		= ide_output_data,
+};
+
 static const struct ide_port_ops pmac_ide_ata6_port_ops = {
 	.init_dev		= pmac_ide_init_dev,
 	.set_pio_mode		= pmac_ide_set_pio_mode,
@@ -1003,10 +1018,11 @@ static const struct ide_port_info pmac_port_info = {
 	.name			= DRV_NAME,
 	.init_dma		= pmac_ide_init_dma,
 	.chipset		= ide_pmac,
+	.tp_ops			= &pmac_tp_ops,
+	.port_ops		= &pmac_ide_port_ops,
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	.dma_ops		= &pmac_dma_ops,
 #endif
-	.port_ops		= &pmac_ide_port_ops,
 	.host_flags		= IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
 				  IDE_HFLAG_POST_SET_MODE |
 				  IDE_HFLAG_MMIO |
@@ -1106,9 +1122,6 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	if (hwif == NULL)
 		return -ENOENT;
 
-	hwif->exec_command = pmac_exec_command;
-	hwif->set_irq	   = pmac_set_irq;
-
 	idx[0] = hwif->index;
 
 	ide_device_add(idx, &d, hws);
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index c1b609d9cb2..804c3ef245f 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -125,7 +125,7 @@ int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
 	 * we tune the drive then try to grab DMA ownership if we want to be
 	 * the DMA end.  This has to be become dynamic to handle hot-plug.
 	 */
-	dma_stat = hwif->read_sff_dma_status(hwif);
+	dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
 	if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
 		printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
 		return -1;
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 2a86af91f64..659db3f7ae0 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -142,7 +142,8 @@ static void ide_scsi_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 				unsigned int bcount, int write)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	xfer_func_t *xf = write ? hwif->output_data : hwif->input_data;
+	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+	xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data;
 	char *buf;
 	int count;
 
@@ -246,9 +247,9 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
 {
 	ide_hwif_t *hwif = drive->hwif;
 
-	if (hwif->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+	if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
 		/* force an abort */
-		hwif->exec_command(hwif, WIN_IDLEIMMEDIATE);
+		hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE);
 
 	rq->errors++;
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e340218b2a5..1286a2275ef 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -408,8 +408,28 @@ typedef struct ide_drive_s {
     ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
 #define IDE_CHIPSET_IS_PCI(c)	((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
 
+struct ide_task_s;
 struct ide_port_info;
 
+struct ide_tp_ops {
+	void	(*exec_command)(struct hwif_s *, u8);
+	u8	(*read_status)(struct hwif_s *);
+	u8	(*read_altstatus)(struct hwif_s *);
+	u8	(*read_sff_dma_status)(struct hwif_s *);
+
+	void	(*set_irq)(struct hwif_s *, int);
+
+	void	(*tf_load)(ide_drive_t *, struct ide_task_s *);
+	void	(*tf_read)(ide_drive_t *, struct ide_task_s *);
+
+	void	(*input_data)(ide_drive_t *, struct request *, void *,
+			      unsigned int);
+	void	(*output_data)(ide_drive_t *, struct request *, void *,
+			       unsigned int);
+};
+
+extern const struct ide_tp_ops default_tp_ops;
+
 struct ide_port_ops {
 	/* host specific initialization of a device */
 	void	(*init_dev)(ide_drive_t *);
@@ -447,8 +467,6 @@ struct ide_dma_ops {
 	void	(*dma_timeout)(struct ide_drive_s *);
 };
 
-struct ide_task_s;
-
 typedef struct hwif_s {
 	struct hwif_s *next;		/* for linked-list in ide_hwgroup_t */
 	struct hwif_s *mate;		/* other hwif from same PCI chip */
@@ -486,22 +504,10 @@ typedef struct hwif_s {
 
 	void (*rw_disk)(ide_drive_t *, struct request *);
 
+	const struct ide_tp_ops		*tp_ops;
 	const struct ide_port_ops	*port_ops;
 	const struct ide_dma_ops	*dma_ops;
 
-	void	(*exec_command)(struct hwif_s *, u8);
-	u8	(*read_status)(struct hwif_s *);
-	u8	(*read_altstatus)(struct hwif_s *);
-	u8	(*read_sff_dma_status)(struct hwif_s *);
-
-	void	(*set_irq)(struct hwif_s *, int);
-
-	void (*tf_load)(ide_drive_t *, struct ide_task_s *);
-	void (*tf_read)(ide_drive_t *, struct ide_task_s *);
-
-	void (*input_data)(ide_drive_t *, struct request *, void *, unsigned);
-	void (*output_data)(ide_drive_t *, struct request *, void *, unsigned);
-
 	void (*ide_dma_clear_irq)(ide_drive_t *drive);
 
 	/* dma physical region descriptor table (cpu view) */
@@ -949,6 +955,19 @@ typedef struct ide_task_s {
 
 void ide_tf_dump(const char *, struct ide_taskfile *);
 
+void ide_exec_command(ide_hwif_t *, u8);
+u8 ide_read_status(ide_hwif_t *);
+u8 ide_read_altstatus(ide_hwif_t *);
+u8 ide_read_sff_dma_status(ide_hwif_t *);
+
+void ide_set_irq(ide_hwif_t *, int);
+
+void ide_tf_load(ide_drive_t *, ide_task_t *);
+void ide_tf_read(ide_drive_t *, ide_task_t *);
+
+void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int);
+void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int);
+
 extern void SELECT_DRIVE(ide_drive_t *);
 void SELECT_MASK(ide_drive_t *, int);
 
@@ -1022,8 +1041,6 @@ static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
 }
 #endif
 
-extern void default_hwif_transport(ide_hwif_t *);
-
 typedef struct ide_pci_enablebit_s {
 	u8	reg;	/* byte pci reg holding the enable-bit */
 	u8	mask;	/* mask to isolate the enable-bit */
@@ -1112,6 +1129,7 @@ struct ide_port_info {
 	int			(*init_dma)(ide_hwif_t *,
 					    const struct ide_port_info *);
 
+	const struct ide_tp_ops		*tp_ops;
 	const struct ide_port_ops	*port_ops;
 	const struct ide_dma_ops	*dma_ops;
 
-- 
cgit v1.2.3


From 48c3c1072651922ed153bcf0a33ea82cf20df390 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:57 +0200
Subject: ide: add struct ide_host (take 3)

* Add struct ide_host which keeps pointers to host's ports.

* Add ide_host_alloc[_all]() and ide_host_remove() helpers.

* Pass 'struct ide_host *host' instead of 'u8 *idx' to
  ide_device_add[_all]() and rename it to ide_host_register[_all]().

* Convert host drivers and core code to use struct ide_host.

* Remove no longer needed ide_find_port().

* Make ide_find_port_slot() static.

* Unexport ide_unregister().

v2:
* Add missing 'struct ide_host *host' to macide.c.

v3:
* Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/)
  (Noticed by Stephen Rothwell).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/icside.c          | 40 +++++------------
 drivers/ide/arm/ide_arm.c         | 12 ++---
 drivers/ide/arm/palm_bk3710.c     | 13 ++----
 drivers/ide/arm/rapide.c          | 17 +++----
 drivers/ide/h8300/ide-h8300.c     | 14 ++----
 drivers/ide/ide-generic.c         | 28 ++++--------
 drivers/ide/ide-pnp.c             | 17 +++----
 drivers/ide/ide-probe.c           | 94 ++++++++++++++++++++++++++++-----------
 drivers/ide/ide.c                 |  2 -
 drivers/ide/legacy/buddha.c       | 19 +++-----
 drivers/ide/legacy/falconide.c    | 11 ++---
 drivers/ide/legacy/gayle.c        | 16 +++----
 drivers/ide/legacy/ide-4drives.c  | 23 +++-------
 drivers/ide/legacy/ide-cs.c       | 46 +++++++++----------
 drivers/ide/legacy/ide_platform.c | 23 +++++-----
 drivers/ide/legacy/macide.c       | 12 ++---
 drivers/ide/legacy/q40ide.c       | 15 +++----
 drivers/ide/mips/au1xxx-ide.c     | 25 +++++------
 drivers/ide/mips/swarm.c          | 13 +++---
 drivers/ide/pci/cmd640.c          | 30 ++++---------
 drivers/ide/pci/cs5520.c          |  8 ++--
 drivers/ide/pci/delkin_cb.c       | 19 +++-----
 drivers/ide/pci/scc_pata.c        | 24 +++++-----
 drivers/ide/pci/sgiioc4.c         | 13 +++---
 drivers/ide/ppc/pmac.c            | 10 ++---
 drivers/ide/setup-pci.c           | 48 ++++++++------------
 include/linux/ide.h               | 21 ++++-----
 27 files changed, 264 insertions(+), 349 deletions(-)

diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 0283d162f7f..6fa58425466 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -72,7 +72,7 @@ struct icside_state {
 	void __iomem *ioc_base;
 	unsigned int sel;
 	unsigned int type;
-	ide_hwif_t *hwif[2];
+	struct ide_host *host;
 };
 
 #define ICS_TYPE_A3IN	0
@@ -442,10 +442,9 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
 static int __init
 icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 {
-	ide_hwif_t *hwif;
 	void __iomem *base;
+	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
 	if (!base)
@@ -465,17 +464,15 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 
 	icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
 
-	hwif = ide_find_port();
-	if (!hwif)
+	host = ide_host_alloc(NULL, hws);
+	if (host == NULL)
 		return -ENODEV;
 
-	state->hwif[0] = hwif;
+	state->host = host;
 
 	ecard_set_drvdata(ec, state);
 
-	idx[0] = hwif->index;
-
-	ide_device_add(idx, NULL, hws);
+	ide_host_register(host, NULL, hws);
 
 	return 0;
 }
@@ -492,12 +489,11 @@ static const struct ide_port_info icside_v6_port_info __initdata = {
 static int __init
 icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 {
-	ide_hwif_t *hwif, *mate;
 	void __iomem *ioc_base, *easi_base;
+	struct ide_host *host;
 	unsigned int sel = 0;
 	int ret;
 	hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	struct ide_port_info d = icside_v6_port_info;
 
 	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
@@ -537,25 +533,11 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
 	icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
 
-	/*
-	 * Find and register the interfaces.
-	 */
-	hwif = ide_find_port();
-	if (hwif == NULL)
+	host = ide_host_alloc(&d, hws);
+	if (host == NULL)
 		return -ENODEV;
 
-	hwif->chipset = ide_acorn;
-
-	idx[0] = hwif->index;
-
-	mate = ide_find_port();
-	if (mate) {
-		hws[1] = &hw[1];
-		idx[1] = mate->index;
-	}
-
-	state->hwif[0]    = hwif;
-	state->hwif[1]    = mate;
+	state->host = host;
 
 	ecard_set_drvdata(ec, state);
 
@@ -565,7 +547,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 		d.dma_ops = NULL;
 	}
 
-	ide_device_add(idx, &d, hws);
+	ide_host_register(host, &d, hws);
 
 	return 0;
 
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index e9831bbd988..9efd7a86db4 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -28,10 +28,9 @@
 
 static int __init ide_arm_init(void)
 {
-	ide_hwif_t *hwif;
+	struct ide_host *host;
 	unsigned long base = IDE_ARM_IO, ctl = IDE_ARM_IO + 0x206;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	if (!request_region(base, 8, DRV_NAME)) {
 		printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
@@ -51,12 +50,9 @@ static int __init ide_arm_init(void)
 	hw.irq = IDE_ARM_IRQ;
 	hw.chipset = ide_generic;
 
-	hwif = ide_find_port();
-	if (hwif) {
-		idx[0] = hwif->index;
-
-		ide_device_add(idx, NULL, hws);
-	}
+	host = ide_host_alloc(NULL, hws);
+	if (host)
+		ide_host_register(host, NULL, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 545563bc7e2..24389a571c3 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -347,11 +347,10 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct resource *mem, *irq;
-	ide_hwif_t *hwif;
+	struct ide_host *host;
 	unsigned long base, rate;
 	int i;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	clk = clk_get(NULL, "IDECLK");
 	if (IS_ERR(clk))
@@ -393,15 +392,11 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 	hw.irq = irq->start;
 	hw.chipset = ide_palm3710;
 
-	hwif = ide_find_port();
-	if (hwif == NULL)
+	host = ide_host_alloc(&palm_bk3710_port_info, hws);
+	if (host == NULL)
 		goto out;
 
-	i = hwif->index;
-
-	idx[0] = i;
-
-	ide_device_add(idx, &palm_bk3710_port_info, hws);
+	ide_host_register(host, &palm_bk3710_port_info, hws);
 
 	return 0;
 out:
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index a45c2f69494..11f3307385d 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -32,11 +32,10 @@ static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base,
 static int __devinit
 rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
-	ide_hwif_t *hwif;
 	void __iomem *base;
+	struct ide_host *host;
 	int ret;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	ret = ecard_request_resources(ec);
 	if (ret)
@@ -53,17 +52,15 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 	hw.chipset = ide_generic;
 	hw.dev = &ec->dev;
 
-	hwif = ide_find_port();
-	if (hwif == NULL) {
+	host = ide_host_alloc(&rapide_port_info, hws);
+	if (host == NULL) {
 		ret = -ENOENT;
 		goto release;
 	}
 
-	idx[0] = hwif->index;
+	ide_host_register(host, &rapide_port_info, hws);
 
-	ide_device_add(idx, &rapide_port_info, hws);
-
-	ecard_set_drvdata(ec, hwif);
+	ecard_set_drvdata(ec, host);
 	goto out;
 
  release:
@@ -74,11 +71,11 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 static void __devexit rapide_remove(struct expansion_card *ec)
 {
-	ide_hwif_t *hwif = ecard_get_drvdata(ec);
+	struct ide_host *host = ecard_get_drvdata(ec);
 
 	ecard_set_drvdata(ec, NULL);
 
-	ide_unregister(hwif);
+	ide_host_remove(host);
 
 	ecard_release_resources(ec);
 }
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 84644e15053..15f76690a48 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -191,10 +191,8 @@ static const struct ide_port_info h8300_port_info = {
 
 static int __init h8300_ide_init(void)
 {
-	ide_hwif_t *hwif;
-	int index;
+	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
 
@@ -207,15 +205,11 @@ static int __init h8300_ide_init(void)
 
 	hw_setup(&hw);
 
-	hwif = ide_find_port_slot(&h8300_port_info);
-	if (hwif == NULL)
+	host = ide_host_alloc(&h8300_port_info, hws);
+	if (host == NULL)
 		return -ENOENT;
 
-	index = hwif->index;
-
-	idx[0] = index;
-
-	ide_device_add(idx, &h8300_port_info, hws);
+	ide_host_register(host, &h8300_port_info, hws);
 
 	return 0;
 
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index a5c352abff5..e8818362eb4 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -28,27 +28,24 @@ MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
 
 static ssize_t store_add(struct class *cls, const char *buf, size_t n)
 {
-	ide_hwif_t *hwif;
+	struct ide_host *host;
 	unsigned int base, ctl;
 	int irq;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[] = { 0xff, 0xff, 0xff, 0xff };
 
 	if (sscanf(buf, "%x:%x:%d", &base, &ctl, &irq) != 3)
 		return -EINVAL;
 
-	hwif = ide_find_port();
-	if (hwif == NULL)
-		return -ENOENT;
-
 	memset(&hw, 0, sizeof(hw));
 	ide_std_init_ports(&hw, base, ctl);
 	hw.irq = irq;
 	hw.chipset = ide_generic;
 
-	idx[0] = hwif->index;
+	host = ide_host_alloc(NULL, hws);
+	if (host == NULL)
+		return -ENOENT;
 
-	ide_device_add(idx, NULL, hws);
+	ide_host_register(host, NULL, hws);
 
 	return n;
 };
@@ -89,18 +86,16 @@ static int __init ide_generic_sysfs_init(void)
 static int __init ide_generic_init(void)
 {
 	hw_regs_t hw[MAX_HWIFS], *hws[MAX_HWIFS];
-	u8 idx[MAX_HWIFS];
+	struct ide_host *host;
 	int i;
 
 	printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
 			 "parameter for probing all legacy ISA IDE ports\n");
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		ide_hwif_t *hwif;
 		unsigned long io_addr = ide_default_io_base(i);
 
 		hws[i] = NULL;
-		idx[i] = 0xff;
 
 		if ((probe_mask & (1 << i)) && io_addr) {
 			if (!request_region(io_addr, 8, DRV_NAME)) {
@@ -118,23 +113,18 @@ static int __init ide_generic_init(void)
 				continue;
 			}
 
-			hwif = ide_find_port();
-			if (hwif == NULL)
-				continue;
-
-			hwif->chipset = ide_generic;
-
 			memset(&hw[i], 0, sizeof(hw[i]));
 			ide_std_init_ports(&hw[i], io_addr, io_addr + 0x206);
 			hw[i].irq = ide_default_irq(io_addr);
 			hw[i].chipset = ide_generic;
 
 			hws[i] = &hw[i];
-			idx[i] = i;
 		}
 	}
 
-	ide_device_add_all(idx, NULL, hws);
+	host = ide_host_alloc_all(NULL, hws);
+	if (host)
+		ide_host_register(host, NULL, hws);
 
 	if (ide_generic_sysfs_init())
 		printk(KERN_ERR DRV_NAME ": failed to create ide_generic "
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 89cd5cbe857..4458ca61897 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -29,7 +29,7 @@ static struct pnp_device_id idepnp_devices[] = {
 
 static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
-	ide_hwif_t *hwif;
+	struct ide_host *host;
 	unsigned long base, ctl;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
@@ -59,14 +59,11 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	hw.irq = pnp_irq(dev, 0);
 	hw.chipset = ide_generic;
 
-	hwif = ide_find_port();
-	if (hwif) {
-		u8 index = hwif->index;
-		u8 idx[4] = { index, 0xff, 0xff, 0xff };
+	host = ide_host_alloc(NULL, hws);
+	if (host) {
+		pnp_set_drvdata(dev, host);
 
-		pnp_set_drvdata(dev, hwif);
-
-		ide_device_add(idx, NULL, hws);
+		ide_host_register(host, NULL, hws);
 
 		return 0;
 	}
@@ -79,9 +76,9 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 
 static void idepnp_remove(struct pnp_dev *dev)
 {
-	ide_hwif_t *hwif = pnp_get_drvdata(dev);
+	struct ide_host *host = pnp_get_drvdata(dev);
 
-	ide_unregister(hwif);
+	ide_host_remove(host);
 
 	release_region(pnp_port_start(dev, 1), 1);
 	release_region(pnp_port_start(dev, 0), 8);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index c588066295d..84a89561ec0 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1477,7 +1477,7 @@ static int ide_sysfs_register_port(ide_hwif_t *hwif)
  *	Return the new hwif.  If we are out of free slots return NULL.
  */
 
-ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d)
+static ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d)
 {
 	ide_hwif_t *hwif;
 	int i;
@@ -1523,14 +1523,63 @@ out_found:
 	ide_init_port_data(hwif, i);
 	return hwif;
 }
-EXPORT_SYMBOL_GPL(ide_find_port_slot);
 
-int ide_device_add_all(u8 *idx, const struct ide_port_info *d, hw_regs_t **hws)
+struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
+				    hw_regs_t **hws)
+{
+	struct ide_host *host;
+	int i;
+
+	host = kzalloc(sizeof(*host), GFP_KERNEL);
+	if (host == NULL)
+		return NULL;
+
+	for (i = 0; i < MAX_HWIFS; i++) {
+		ide_hwif_t *hwif;
+
+		if (hws[i] == NULL)
+			continue;
+
+		hwif = ide_find_port_slot(d);
+		if (hwif) {
+			hwif->chipset = hws[i]->chipset;
+
+			host->ports[i] = hwif;
+			host->n_ports++;
+		}
+	}
+
+	if (host->n_ports == 0) {
+		kfree(host);
+		return NULL;
+	}
+
+	return host;
+}
+EXPORT_SYMBOL_GPL(ide_host_alloc_all);
+
+struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
+{
+	hw_regs_t *hws_all[MAX_HWIFS];
+	int i;
+
+	for (i = 0; i < MAX_HWIFS; i++)
+		hws_all[i] = (i < 4) ? hws[i] : NULL;
+
+	return ide_host_alloc_all(d, hws_all);
+}
+EXPORT_SYMBOL_GPL(ide_host_alloc);
+
+int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
+		      hw_regs_t **hws)
 {
 	ide_hwif_t *hwif, *mate = NULL;
+	u8 idx[MAX_HWIFS];
 	int i, rc = 0;
 
 	for (i = 0; i < MAX_HWIFS; i++) {
+		idx[i] = host->ports[i] ? host->ports[i]->index : 0xff;
+
 		if (idx[i] == 0xff) {
 			mate = NULL;
 			continue;
@@ -1626,22 +1675,20 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d, hw_regs_t **hws)
 
 	return rc;
 }
-EXPORT_SYMBOL_GPL(ide_device_add_all);
+EXPORT_SYMBOL_GPL(ide_host_register);
 
-int ide_device_add(u8 *idx, const struct ide_port_info *d, hw_regs_t **hws)
+void ide_host_remove(struct ide_host *host)
 {
-	hw_regs_t *hws_all[MAX_HWIFS];
-	u8 idx_all[MAX_HWIFS];
 	int i;
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		hws_all[i] = (i < 4) ? hws[i] : NULL;
-		idx_all[i] = (i < 4) ? idx[i] : 0xff;
+		if (host->ports[i])
+			ide_unregister(host->ports[i]);
 	}
 
-	return ide_device_add_all(idx_all, d, hws_all);
+	kfree(host);
 }
-EXPORT_SYMBOL_GPL(ide_device_add);
+EXPORT_SYMBOL_GPL(ide_host_remove);
 
 void ide_port_scan(ide_hwif_t *hwif)
 {
@@ -1662,11 +1709,10 @@ void ide_port_scan(ide_hwif_t *hwif)
 }
 EXPORT_SYMBOL_GPL(ide_port_scan);
 
-static void ide_legacy_init_one(u8 *idx, hw_regs_t **hws, hw_regs_t *hw,
+static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
 				u8 port_no, const struct ide_port_info *d,
 				unsigned long config)
 {
-	ide_hwif_t *hwif;
 	unsigned long base, ctl;
 	int irq;
 
@@ -1698,31 +1744,29 @@ static void ide_legacy_init_one(u8 *idx, hw_regs_t **hws, hw_regs_t *hw,
 	hw->chipset = d->chipset;
 	hw->config = config;
 
-	hwif = ide_find_port_slot(d);
-	if (hwif) {
-		hwif->chipset = hw->chipset;
-
-		hws[port_no] = hw;
-		idx[port_no] = hwif->index;
-	}
+	hws[port_no] = hw;
 }
 
 int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
 {
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+	struct ide_host *host;
 	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
 
 	memset(&hw, 0, sizeof(hw));
 
 	if ((d->host_flags & IDE_HFLAG_QD_2ND_PORT) == 0)
-		ide_legacy_init_one(idx, hws, &hw[0], 0, d, config);
-	ide_legacy_init_one(idx, hws, &hw[1], 1, d, config);
+		ide_legacy_init_one(hws, &hw[0], 0, d, config);
+	ide_legacy_init_one(hws, &hw[1], 1, d, config);
 
-	if (idx[0] == 0xff && idx[1] == 0xff &&
+	if (hws[0] == NULL && hws[1] == NULL &&
 	    (d->host_flags & IDE_HFLAG_SINGLE))
 		return -ENOENT;
 
-	ide_device_add(idx, d, hws);
+	host = ide_host_alloc(d, hws);
+	if (host == NULL)
+		return -ENOMEM;
+
+	ide_host_register(host, d, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 132b504168e..7e9575d1aee 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -276,8 +276,6 @@ void ide_unregister(ide_hwif_t *hwif)
 	mutex_unlock(&ide_cfg_mtx);
 }
 
-EXPORT_SYMBOL(ide_unregister);
-
 void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
 {
 	memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports));
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index c61bc6a1db3..2625667fab4 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -150,18 +150,15 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
 
 static int __init buddha_init(void)
 {
-	ide_hwif_t *hwif;
-	int i;
-
 	struct zorro_dev *z = NULL;
+	struct ide_host *host;
 	u_long buddha_board = 0;
 	BuddhaType type;
-	int buddha_num_hwifs;
+	int buddha_num_hwifs, i;
 
 	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
 		unsigned long board;
 		hw_regs_t hw[MAX_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
-		u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
 			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
@@ -226,16 +223,12 @@ fail_base2:
 			buddha_setup_ports(&hw[i], base, ctl, irq_port,
 					   ack_intr);
 
-			hwif = ide_find_port();
-			if (hwif) {
-				hwif->chipset = ide_generic;
-
-				hws[i] = &hw[i];
-				idx[i] = hwif->index;
-			}
+			hws[i] = &hw[i];
 		}
 
-		ide_device_add(idx, NULL, hws);
+		host = ide_host_alloc(NULL, hws);
+		if (host)
+			ide_host_register(host, NULL, hws);
 	}
 
 	return 0;
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 3e2c6125f03..4eb5c3f9fec 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -112,7 +112,7 @@ static void __init falconide_setup_ports(hw_regs_t *hw)
 
 static int __init falconide_init(void)
 {
-	ide_hwif_t *hwif;
+	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
@@ -127,13 +127,10 @@ static int __init falconide_init(void)
 
 	falconide_setup_ports(&hw);
 
-	hwif = ide_find_port();
-	if (hwif) {
-		u8 index = hwif->index;
-		u8 idx[4] = { index, 0xff, 0xff, 0xff };
-
+	host = ide_host_alloc(&falconide_port_info, hws);
+	if (host) {
 		ide_get_lock(NULL, NULL);
-		ide_device_add(idx, &falconide_port_info, hws);
+		ide_host_register(host, &falconide_port_info, hws);
 		ide_release_lock();
 	}
 
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index 7baeefa870f..13d22bded6b 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -127,9 +127,9 @@ static int __init gayle_init(void)
     unsigned long phys_base, res_start, res_n;
     unsigned long base, ctrlport, irqport;
     ide_ack_intr_t *ack_intr;
+    struct ide_host *host;
     int a4000, i;
     hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
-    u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
     if (!MACH_IS_AMIGA)
 	return -ENODEV;
@@ -172,23 +172,17 @@ found:
 		return -EBUSY;
 
     for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
-	ide_hwif_t *hwif;
-
 	base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
 	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
 
 	gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
 
-	hwif = ide_find_port();
-	if (hwif) {
-	    hwif->chipset = ide_generic;
-
-	    hws[i] = &hw[i];
-	    idx[i] = hwif->index;
-	}
+	hws[i] = &hw[i];
     }
 
-    ide_device_add(idx, NULL, hws);
+    host = ide_host_alloc(NULL, hws);
+    if (host)
+	ide_host_register(host, NULL, hws);
 
     return 0;
 }
diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c
index 6310dc50e3c..5935153ef2a 100644
--- a/drivers/ide/legacy/ide-4drives.c
+++ b/drivers/ide/legacy/ide-4drives.c
@@ -28,10 +28,9 @@ static const struct ide_port_info ide_4drives_port_info = {
 
 static int __init ide_4drives_init(void)
 {
-	ide_hwif_t *hwif, *mate;
+	struct ide_host *host;
 	unsigned long base = 0x1f0, ctl = 0x3f6;
-	hw_regs_t hw, *hws[] = { NULL, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+	hw_regs_t hw, *hws[] = { &hw, &hw, NULL, NULL };
 
 	if (probe_4drives == 0)
 		return -ENODEV;
@@ -55,21 +54,9 @@ static int __init ide_4drives_init(void)
 	hw.irq = 14;
 	hw.chipset = ide_4drives;
 
-	hwif = ide_find_port();
-	if (hwif) {
-		hwif->chipset = ide_4drives;
-
-		hws[0] = &hw;
-		idx[0] = hwif->index;
-	}
-
-	mate = ide_find_port();
-	if (mate) {
-		hws[1] = &hw;
-		idx[1] = mate->index;
-	}
-
-	ide_device_add(idx, &ide_4drives_port_info, hws);
+	host = ide_host_alloc(&ide_4drives_port_info, hws);
+	if (host)
+		ide_host_register(host, &ide_4drives_port_info, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index f93d5454ebf..1a4b9e6887f 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -74,7 +74,7 @@ INT_MODULE_PARM(pc_debug, 0);
 
 typedef struct ide_info_t {
 	struct pcmcia_device	*p_dev;
-	ide_hwif_t		*hwif;
+	struct ide_host		*host;
     int		ndev;
     dev_node_t	node;
 } ide_info_t;
@@ -132,7 +132,7 @@ static int ide_probe(struct pcmcia_device *link)
 static void ide_detach(struct pcmcia_device *link)
 {
     ide_info_t *info = link->priv;
-    ide_hwif_t *hwif = info->hwif;
+    ide_hwif_t *hwif = info->host->ports[0];
     unsigned long data_addr, ctl_addr;
 
     DEBUG(0, "ide_detach(0x%p)\n", link);
@@ -157,13 +157,13 @@ static const struct ide_port_info idecs_port_info = {
 	.host_flags		= IDE_HFLAG_NO_DMA,
 };
 
-static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl,
+static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
 				unsigned long irq, struct pcmcia_device *handle)
 {
+    struct ide_host *host;
     ide_hwif_t *hwif;
     int i;
     hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-    u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
     if (!request_region(io, 8, DRV_NAME)) {
 	printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
@@ -184,26 +184,26 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl,
     hw.chipset = ide_pci;
     hw.dev = &handle->dev;
 
-    hwif = ide_find_port();
-    if (hwif == NULL)
+    host = ide_host_alloc(&idecs_port_info, hws);
+    if (host == NULL)
 	goto out_release;
 
-    idx[0] = hwif->index;
+    ide_host_register(host, &idecs_port_info, hws);
 
-    ide_device_add(idx, &idecs_port_info, hws);
+    hwif = host->ports[0];
 
     if (hwif->present)
-	return hwif;
+	return host;
 
     /* retry registration in case device is still spinning up */
     for (i = 0; i < 10; i++) {
 	msleep(100);
 	ide_port_scan(hwif);
 	if (hwif->present)
-	    return hwif;
+	    return host;
     }
 
-    return hwif;
+    return host;
 
 out_release:
     release_region(ctl, 1);
@@ -235,7 +235,7 @@ static int ide_config(struct pcmcia_device *link)
     cistpl_cftable_entry_t *cfg;
     int pass, last_ret = 0, last_fn = 0, is_kme = 0;
     unsigned long io_base, ctl_base;
-    ide_hwif_t *hwif;
+    struct ide_host *host;
 
     DEBUG(0, "ide_config(0x%p)\n", link);
 
@@ -330,21 +330,21 @@ static int ide_config(struct pcmcia_device *link)
     if (is_kme)
 	outb(0x81, ctl_base+1);
 
-     hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
-     if (hwif == NULL && link->io.NumPorts1 == 0x20) {
+     host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
+     if (host == NULL && link->io.NumPorts1 == 0x20) {
 	    outb(0x02, ctl_base + 0x10);
-	    hwif = idecs_register(io_base + 0x10, ctl_base + 0x10,
+	    host = idecs_register(io_base + 0x10, ctl_base + 0x10,
 				  link->irq.AssignedIRQ, link);
     }
 
-    if (hwif == NULL)
+    if (host == NULL)
 	goto failed;
 
     info->ndev = 1;
-    sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2);
-    info->node.major = hwif->major;
+    sprintf(info->node.dev_name, "hd%c", 'a' + host->ports[0]->index * 2);
+    info->node.major = host->ports[0]->major;
     info->node.minor = 0;
-    info->hwif = hwif;
+    info->host = host;
     link->dev_node = &info->node;
     printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
 	   info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
@@ -375,15 +375,15 @@ failed:
 static void ide_release(struct pcmcia_device *link)
 {
     ide_info_t *info = link->priv;
-    ide_hwif_t *hwif = info->hwif;
+    struct ide_host *host = info->host;
 
     DEBUG(0, "ide_release(0x%p)\n", link);
 
-    if (info->ndev) {
+    if (info->ndev)
 	/* FIXME: if this fails we need to queue the cleanup somehow
 	   -- need to investigate the required PCMCIA magic */
-	ide_unregister(hwif);
-    }
+	ide_host_remove(host);
+
     info->ndev = 0;
 
     pcmcia_disable_device(link);
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
index 3d71e336a22..58a942c6a13 100644
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -52,11 +52,10 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 {
 	struct resource *res_base, *res_alt, *res_irq;
 	void __iomem *base, *alt_base;
-	ide_hwif_t *hwif;
 	struct pata_platform_info *pdata;
+	struct ide_host *host;
 	int ret = 0, mmio = 0;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	struct ide_port_info d = platform_ide_port_info;
 
 	pdata = pdev->dev.platform_data;
@@ -93,12 +92,6 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 			res_alt->start, res_alt->end - res_alt->start + 1);
 	}
 
-	hwif = ide_find_port();
-	if (!hwif) {
-		ret = -ENODEV;
-		goto out;
-	}
-
 	memset(&hw, 0, sizeof(hw));
 	plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start);
 	hw.dev = &pdev->dev;
@@ -106,11 +99,15 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 	if (mmio)
 		d.host_flags |= IDE_HFLAG_MMIO;
 
-	idx[0] = hwif->index;
+	host = ide_host_alloc(&d, hws);
+	if (host == NULL) {
+		ret = -ENODEV;
+		goto out;
+	}
 
-	ide_device_add(idx, &d, hws);
+	ide_host_register(host, &d, hws);
 
-	platform_set_drvdata(pdev, hwif);
+	platform_set_drvdata(pdev, host);
 
 	return 0;
 
@@ -120,9 +117,9 @@ out:
 
 static int __devexit plat_ide_remove(struct platform_device *pdev)
 {
-	ide_hwif_t *hwif = pdev->dev.driver_data;
+	struct ide_host *host = pdev->dev.driver_data;
 
-	ide_unregister(hwif);
+	ide_host_remove(host);
 
 	return 0;
 }
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index d839df2239f..b49cf8c2b91 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -91,8 +91,8 @@ static const char *mac_ide_name[] =
 
 static int __init macide_init(void)
 {
-	ide_hwif_t *hwif;
 	ide_ack_intr_t *ack_intr;
+	struct ide_host *host;
 	unsigned long base;
 	int irq;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
@@ -125,13 +125,9 @@ static int __init macide_init(void)
 
 	macide_setup_ports(&hw, base, irq, ack_intr);
 
-	hwif = ide_find_port();
-	if (hwif) {
-		u8 index = hwif->index;
-		u8 idx[4] = { index, 0xff, 0xff, 0xff };
-
-		ide_device_add(idx, NULL, hws);
-	}
+	host = ide_host_alloc(NULL, hws);
+	if (host)
+		ide_host_register(host, NULL, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 2dc306f852a..8fb4438a6af 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -131,10 +131,9 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
 
 static int __init q40ide_init(void)
 {
+    struct ide_host *host;
     int i;
-    ide_hwif_t *hwif;
     hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
-    u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
     if (!MACH_IS_Q40)
       return -ENODEV;
@@ -158,16 +157,12 @@ static int __init q40ide_init(void)
 	q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
 			q40ide_default_irq(pcide_bases[i]));
 
-	hwif = ide_find_port();
-	if (hwif) {
-		hwif->chipset = ide_generic;
-
-		hws[i] = &hw[i];
-		idx[i] = hwif->index;
-	}
+	hws[i] = &hw[i];
     }
 
-    ide_device_add(idx, &q40ide_port_info, hws);
+    host = ide_host_alloc(&q40ide_port_info, hws);
+    if (host)
+	ide_host_register(host, &q40ide_port_info, hws);
 
     return 0;
 }
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index ed1c9a13407..903c628bddd 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -563,11 +563,10 @@ static int au_ide_probe(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	_auide_hwif *ahwif = &auide_hwif;
-	ide_hwif_t *hwif;
 	struct resource *res;
+	struct ide_host *host;
 	int ret = 0;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
 	char *mode = "MWDMA2";
@@ -604,25 +603,23 @@ static int au_ide_probe(struct device *dev)
 		goto out;
 	}
 
-	hwif = ide_find_port();
-	if (hwif == NULL) {
-		ret = -ENOENT;
-		goto out;
-	}
-
 	memset(&hw, 0, sizeof(hw));
 	auide_setup_ports(&hw, ahwif);
 	hw.irq = ahwif->irq;
 	hw.dev = dev;
 	hw.chipset = ide_au1xxx;
 
-	auide_hwif.hwif                 = hwif;
+	host = ide_host_alloc(&au1xxx_port_info, hws);
+	if (host == NULL) {
+		ret = -ENOENT;
+		goto out;
+	}
 
-	idx[0] = hwif->index;
+	ide_host_register(host, &au1xxx_port_info, hws);
 
-	ide_device_add(idx, &au1xxx_port_info, hws);
+	auide_hwif.hwif = host->ports[0];
 
-	dev_set_drvdata(dev, hwif);
+	dev_set_drvdata(dev, host);
 
 	printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
 
@@ -634,10 +631,10 @@ static int au_ide_remove(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct resource *res;
-	ide_hwif_t *hwif = dev_get_drvdata(dev);
+	struct ide_host *host = dev_get_drvdata(dev);
 	_auide_hwif *ahwif = &auide_hwif;
 
-	ide_unregister(hwif);
+	ide_host_remove(host);
 
 	iounmap((void *)ahwif->regbase);
 
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
index c1ffb83a2de..b12d9d22483 100644
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -72,12 +72,11 @@ static const struct ide_port_info swarm_port_info = {
  */
 static int __devinit swarm_ide_probe(struct device *dev)
 {
-	ide_hwif_t *hwif;
 	u8 __iomem *base;
+	struct ide_host *host;
 	phys_t offset, size;
 	int i;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[] = { 0xff, 0xff, 0xff, 0xff };
 
 	if (!SIBYTE_HAVE_IDE)
 		return -ENODEV;
@@ -116,15 +115,13 @@ static int __devinit swarm_ide_probe(struct device *dev)
 	hw.irq = K_INT_GB_IDE;
 	hw.chipset = ide_generic;
 
-	hwif = ide_find_port_slot(&swarm_port_info);
-	if (hwif == NULL)
+	host = ide_host_alloc(&swarm_port_info, hws);
+	if (host == NULL)
 		goto err;
 
-	idx[0] = hwif->index;
+	ide_host_register(host, &swarm_port_info, hws);
 
-	ide_device_add(idx, &swarm_port_info, hws);
-
-	dev_set_drvdata(dev, hwif);
+	dev_set_drvdata(dev, host);
 
 	return 0;
 err:
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index ccde1e444e1..013697b8cef 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -180,11 +180,6 @@ static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */
 
 static DEFINE_SPINLOCK(cmd640_lock);
 
-/*
- * These are initialized to point at the devices we control
- */
-static ide_hwif_t  *cmd_hwif0, *cmd_hwif1;
-
 /*
  * Interface to access cmd640x registers
  */
@@ -714,11 +709,11 @@ static int cmd640x_init_one(unsigned long base, unsigned long ctl)
  */
 static int __init cmd640x_init(void)
 {
+	struct ide_host *host;
 	int second_port_cmd640 = 0, rc;
 	const char *bus_type, *port2;
 	u8 b, cfr;
 	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	if (cmd640_vlb && probe_for_cmd640_vlb()) {
 		bus_type = "VLB";
@@ -781,17 +776,10 @@ static int __init cmd640x_init(void)
 	printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
 			 "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
 
-	cmd_hwif0 = ide_find_port();
-
 	/*
 	 * Initialize data for primary port
 	 */
-	if (cmd_hwif0) {
-		cmd_hwif0->chipset = ide_cmd640;
-
-		hws[0] = &hw[0];
-		idx[0] = cmd_hwif0->index;
-	}
+	hws[0] = &hw[0];
 
 	/*
 	 * Ensure compatibility by always using the slowest timings
@@ -831,13 +819,9 @@ static int __init cmd640x_init(void)
 	/*
 	 * Initialize data for secondary cmd640 port, if enabled
 	 */
-	if (second_port_cmd640) {
-		cmd_hwif1 = ide_find_port();
-		if (cmd_hwif1) {
-			hws[1] = &hw[1];
-			idx[1] = cmd_hwif1->index;
-		}
-	}
+	if (second_port_cmd640)
+		hws[1] = &hw[1];
+
 	printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
 			 second_port_cmd640 ? "" : "not ", port2);
 
@@ -845,7 +829,9 @@ static int __init cmd640x_init(void)
 	cmd640_dump_regs();
 #endif
 
-	ide_device_add(idx, &cmd640_port_info, hws);
+	host = ide_host_alloc(&cmd640_port_info, hws);
+	if (host)
+		ide_host_register(host, &cmd640_port_info, hws);
 
 	return 1;
 }
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index e8e7df1915b..b8ec06d22c6 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -114,9 +114,9 @@ static const struct ide_port_info cyrix_chipsets[] __devinitdata = {
  
 static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	struct ide_host *host;
 	const struct ide_port_info *d = &cyrix_chipsets[id->driver_data];
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	ide_setup_pci_noise(dev, d);
 
@@ -138,9 +138,11 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 	 *	do all the device setup for us
 	 */
 
-	ide_pci_setup_ports(dev, d, 14, &idx[0], &hw[0], &hws[0]);
+	ide_pci_setup_ports(dev, d, 14, &hw[0], &hws[0]);
 
-	ide_device_add(idx, d, hws);
+	host = ide_host_alloc(d, hws);
+	if (host)
+		ide_host_register(host, d, hws);
 
 	return 0;
 }
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index 33fe15db408..5eb9d932518 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -56,11 +56,10 @@ static const struct ide_port_info delkin_cb_port_info = {
 static int __devinit
 delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 {
+	struct ide_host *host;
 	unsigned long base;
-	ide_hwif_t *hwif = NULL;
 	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	rc = pci_enable_device(dev);
 	if (rc) {
@@ -87,17 +86,13 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 	hw.dev = &dev->dev;
 	hw.chipset = ide_pci;		/* this enables IRQ sharing */
 
-	hwif = ide_find_port();
-	if (hwif == NULL)
+	host = ide_host_alloc(&delkin_cb_port_info, hws);
+	if (host == NULL)
 		goto out_disable;
 
-	i = hwif->index;
+	ide_host_register(host, &delkin_cb_port_info, hws);
 
-	idx[0] = i;
-
-	ide_device_add(idx, &delkin_cb_port_info, hws);
-
-	pci_set_drvdata(dev, hwif);
+	pci_set_drvdata(dev, host);
 
 	return 0;
 
@@ -110,9 +105,9 @@ out_disable:
 static void
 delkin_cb_remove (struct pci_dev *dev)
 {
-	ide_hwif_t *hwif = pci_get_drvdata(dev);
+	struct ide_host *host = pci_get_drvdata(dev);
 
-	ide_unregister(hwif);
+	ide_host_remove(host);
 
 	pci_release_regions(dev);
 	pci_disable_device(dev);
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 5b1a0e950df..d5e2ba6bacd 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -65,7 +65,7 @@
 
 static struct scc_ports {
 	unsigned long ctl, dma;
-	ide_hwif_t *hwif;  /* for removing port from system */
+	struct ide_host *host;	/* for removing port from system */
 } scc_ports[MAX_HWIFS];
 
 /* PIO transfer mode  table */
@@ -586,15 +586,10 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 				    const struct ide_port_info *d)
 {
 	struct scc_ports *ports = pci_get_drvdata(dev);
-	ide_hwif_t *hwif = NULL;
+	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	int i;
 
-	hwif = ide_find_port_slot(d);
-	if (hwif == NULL)
-		return -ENOMEM;
-
 	memset(&hw, 0, sizeof(hw));
 	for (i = 0; i <= 8; i++)
 		hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
@@ -602,9 +597,13 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 	hw.dev = &dev->dev;
 	hw.chipset = ide_pci;
 
-	idx[0] = hwif->index;
+	host = ide_host_alloc(d, hws);
+	if (host == NULL)
+		return -ENOMEM;
 
-	ide_device_add(idx, d, hws);
+	ide_host_register(host, d, hws);
+
+	ports->host = host;
 
 	return 0;
 }
@@ -848,8 +847,6 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
 {
 	struct scc_ports *ports = ide_get_hwifdata(hwif);
 
-	ports->hwif = hwif;
-
 	/* PTERADD */
 	out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
 
@@ -932,7 +929,8 @@ static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_i
 static void __devexit scc_remove(struct pci_dev *dev)
 {
 	struct scc_ports *ports = pci_get_drvdata(dev);
-	ide_hwif_t *hwif = ports->hwif;
+	struct ide_host *host = ports->host;
+	ide_hwif_t *hwif = host->ports[0];
 
 	if (hwif->dmatable_cpu) {
 		pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES,
@@ -940,7 +938,7 @@ static void __devexit scc_remove(struct pci_dev *dev)
 		hwif->dmatable_cpu = NULL;
 	}
 
-	ide_unregister(hwif);
+	ide_host_remove(host);
 
 	iounmap((void*)ports->dma);
 	iounmap((void*)ports->ctl);
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 5598bd5936d..440f43a86ad 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -600,9 +600,8 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	unsigned long cmd_base, irqport;
 	unsigned long bar0, cmd_phys_base, ctl;
 	void __iomem *virt_base;
-	ide_hwif_t *hwif;
+	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	struct ide_port_info d = sgiioc4_port_info;
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
@@ -635,16 +634,14 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	hw.chipset = ide_pci;
 	hw.dev = &dev->dev;
 
-	hwif = ide_find_port_slot(&d);
-	if (hwif == NULL)
-		goto err;
-
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	idx[0] = hwif->index;
+	host = ide_host_alloc(&d, hws);
+	if (host == NULL)
+		goto err;
 
-	if (ide_device_add(idx, &d, hws))
+	if (ide_host_register(host, &d, hws))
 		return -EIO;
 
 	return 0;
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index ee557d10a76..ecd2f28da1b 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1039,9 +1039,9 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 {
 	struct device_node *np = pmif->node;
 	const int *bidp;
+	struct ide_host *host;
 	ide_hwif_t *hwif;
 	hw_regs_t *hws[] = { hw, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 	struct ide_port_info d = pmac_port_info;
 
 	pmif->broken_dma = pmif->broken_dma_warn = 0;
@@ -1118,13 +1118,13 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 			 pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
 			 pmif->mediabay ? " (mediabay)" : "", hw->irq);
 
-	hwif = ide_find_port_slot(&d);
-	if (hwif == NULL)
+	host = ide_host_alloc(&d, hws);
+	if (host == NULL)
 		return -ENOENT;
 
-	idx[0] = hwif->index;
+	ide_host_register(host, &d, hws);
 
-	ide_device_add(idx, &d, hws);
+	hwif = host->ports[0];
 
 	return 0;
 }
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 804c3ef245f..1c0c5570dec 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -289,7 +289,7 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
 }
 
 /**
- *	ide_hwif_configure	-	configure an IDE interface
+ *	ide_hw_configure	-	configure a hw_regs_t instance
  *	@dev: PCI device holding interface
  *	@d: IDE port info
  *	@port: port number
@@ -300,23 +300,20 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *
  *	is done per interface port rather than per PCI device. There may be
  *	more than one port per device.
  *
- *	Returns the new hardware interface structure, or NULL on a failure
+ *	Returns zero on success or an error code.
  */
 
-static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev,
-				      const struct ide_port_info *d,
-				      unsigned int port, int irq,
-				      hw_regs_t *hw)
+static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
+			    unsigned int port, int irq, hw_regs_t *hw)
 {
 	unsigned long ctl = 0, base = 0;
-	ide_hwif_t *hwif;
 
 	if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
 		if (ide_pci_check_iomem(dev, d, 2 * port) ||
 		    ide_pci_check_iomem(dev, d, 2 * port + 1)) {
 			printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported "
 					"as MEM for port %d!\n", d->name, port);
-			return NULL;
+			return -EINVAL;
 		}
 
 		ctl  = pci_resource_start(dev, 2*port+1);
@@ -330,7 +327,7 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev,
 	if (!base || !ctl) {
 		printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n",
 				d->name, port);
-		return NULL;
+		return -EINVAL;
 	}
 
 	memset(hw, 0, sizeof(*hw));
@@ -339,13 +336,7 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev,
 	hw->chipset = d->chipset ? d->chipset : ide_pci;
 	ide_std_init_ports(hw, base, ctl | 2);
 
-	hwif = ide_find_port_slot(d);
-	if (hwif == NULL)
-		return NULL;
-
-	hwif->chipset = hw->chipset;
-
-	return hwif;
+	return 0;
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -443,7 +434,6 @@ out:
  *	@dev: PCI device
  *	@d: IDE port info
  *	@pciirq: IRQ line
- *	@idx: ATA index table to update
  *	@hw: hw_regs_t instances corresponding to this PCI IDE device
  *	@hws: hw_regs_t pointers table to update
  *
@@ -457,10 +447,9 @@ out:
  */
 
 void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
-			 int pciirq, u8 *idx, hw_regs_t *hw, hw_regs_t **hws)
+			 int pciirq, hw_regs_t *hw, hw_regs_t **hws)
 {
 	int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port;
-	ide_hwif_t *hwif;
 	u8 tmp;
 
 	/*
@@ -476,12 +465,10 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
 			continue;	/* port not enabled */
 		}
 
-		hwif = ide_hwif_configure(dev, d, port, pciirq, hw + port);
-		if (hwif == NULL)
+		if (ide_hw_configure(dev, d, port, pciirq, hw + port))
 			continue;
 
 		*(hws + port) = hw + port;
-		*(idx + port) = hwif->index;
 	}
 }
 EXPORT_SYMBOL_GPL(ide_pci_setup_ports);
@@ -554,7 +541,7 @@ out:
 
 int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 {
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+	struct ide_host *host;
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 	int ret;
 
@@ -562,9 +549,11 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 
 	if (ret >= 0) {
 		/* FIXME: silent failure can happen */
-		ide_pci_setup_ports(dev, d, ret, &idx[0], &hw[0], &hws[0]);
+		ide_pci_setup_ports(dev, d, ret, &hw[0], &hws[0]);
 
-		ide_device_add(idx, d, hws);
+		host = ide_host_alloc(d, hws);
+		if (host)
+			ide_host_register(host, d, hws);
 	}
 
 	return ret;
@@ -575,9 +564,9 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 			  const struct ide_port_info *d)
 {
 	struct pci_dev *pdev[] = { dev1, dev2 };
+	struct ide_host *host;
 	int ret, i;
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	for (i = 0; i < 2; i++) {
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
@@ -590,11 +579,12 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 			goto out;
 
 		/* FIXME: silent failure can happen */
-		ide_pci_setup_ports(pdev[i], d, ret, &idx[i*2], &hw[i*2],
-				    &hws[i*2]);
+		ide_pci_setup_ports(pdev[i], d, ret, &hw[i*2], &hws[i*2]);
 	}
 
-	ide_device_add(idx, d, hws);
+	host = ide_host_alloc(d, hws);
+	if (host)
+		ide_host_register(host, d, hws);
 out:
 	return ret;
 }
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 1286a2275ef..a41ae57fafc 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -558,6 +558,11 @@ typedef struct hwif_s {
 #endif
 } ____cacheline_internodealigned_in_smp ide_hwif_t;
 
+struct ide_host {
+	ide_hwif_t	*ports[MAX_HWIFS];
+	unsigned int	n_ports;
+};
+
 /*
  *  internal ide interrupt handler type
  */
@@ -813,13 +818,6 @@ int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsig
 extern int ide_vlb_clk;
 extern int ide_pci_clk;
 
-ide_hwif_t *ide_find_port_slot(const struct ide_port_info *);
-
-static inline ide_hwif_t *ide_find_port(void)
-{
-	return ide_find_port_slot(NULL);
-}
-
 extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
 int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
 			     int uptodate, int nr_sectors);
@@ -1024,7 +1022,7 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o
 #endif
 
 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
-			 u8 *, hw_regs_t *, hw_regs_t **);
+			 hw_regs_t *, hw_regs_t **);
 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -1236,8 +1234,11 @@ void ide_undecoded_slave(ide_drive_t *);
 
 void ide_port_apply_params(ide_hwif_t *);
 
-int ide_device_add_all(u8 *, const struct ide_port_info *, hw_regs_t **);
-int ide_device_add(u8 *, const struct ide_port_info *, hw_regs_t **);
+struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **);
+struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
+int ide_host_register(struct ide_host *, const struct ide_port_info *,
+		      hw_regs_t **);
+void ide_host_remove(struct ide_host *);
 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
 void ide_port_unregister_devices(ide_hwif_t *);
 void ide_port_scan(ide_hwif_t *);
-- 
cgit v1.2.3


From 6f904d015262dfa43eb1cecc00b0998b4c3543f2 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:57 +0200
Subject: ide: add ide_host_add() helper

Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(),
then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some
host drivers to use it.

While at it:

* Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c,
  macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value.

* -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c
  and pmac.c

* -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c

* -1 -> -ENOMEM in ide-pnp.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/ide_arm.c         |  7 +------
 drivers/ide/arm/palm_bk3710.c     | 10 ++++------
 drivers/ide/arm/rapide.c          |  8 ++------
 drivers/ide/h8300/ide-h8300.c     |  9 +--------
 drivers/ide/ide-generic.c         | 11 ++++-------
 drivers/ide/ide-pnp.c             | 16 ++++++++--------
 drivers/ide/ide-probe.c           | 27 +++++++++++++++++++--------
 drivers/ide/legacy/buddha.c       |  5 +----
 drivers/ide/legacy/gayle.c        |  7 +------
 drivers/ide/legacy/ide-4drives.c  |  7 +------
 drivers/ide/legacy/ide-cs.c       |  8 +++-----
 drivers/ide/legacy/ide_platform.c |  8 ++------
 drivers/ide/legacy/macide.c       |  7 +------
 drivers/ide/legacy/q40ide.c       |  7 +------
 drivers/ide/mips/au1xxx-ide.c     |  8 ++------
 drivers/ide/mips/swarm.c          | 10 ++++------
 drivers/ide/pci/cmd640.c          |  7 +------
 drivers/ide/pci/cs5520.c          |  7 +------
 drivers/ide/pci/delkin_cb.c       |  8 +++-----
 drivers/ide/pci/scc_pata.c        | 10 ++++------
 drivers/ide/ppc/pmac.c            |  9 ++++-----
 drivers/ide/setup-pci.c           | 10 ++--------
 include/linux/ide.h               |  2 ++
 23 files changed, 72 insertions(+), 136 deletions(-)

diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 9efd7a86db4..176532ffae0 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -28,7 +28,6 @@
 
 static int __init ide_arm_init(void)
 {
-	struct ide_host *host;
 	unsigned long base = IDE_ARM_IO, ctl = IDE_ARM_IO + 0x206;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
@@ -50,11 +49,7 @@ static int __init ide_arm_init(void)
 	hw.irq = IDE_ARM_IRQ;
 	hw.chipset = ide_generic;
 
-	host = ide_host_alloc(NULL, hws);
-	if (host)
-		ide_host_register(host, NULL, hws);
-
-	return 0;
+	return ide_host_add(NULL, hws, NULL);
 }
 
 module_init(ide_arm_init);
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 24389a571c3..65bb4b8fd57 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -349,7 +349,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 	struct resource *mem, *irq;
 	struct ide_host *host;
 	unsigned long base, rate;
-	int i;
+	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	clk = clk_get(NULL, "IDECLK");
@@ -392,16 +392,14 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 	hw.irq = irq->start;
 	hw.chipset = ide_palm3710;
 
-	host = ide_host_alloc(&palm_bk3710_port_info, hws);
-	if (host == NULL)
+	rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
+	if (rc)
 		goto out;
 
-	ide_host_register(host, &palm_bk3710_port_info, hws);
-
 	return 0;
 out:
 	printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
-	return -ENODEV;
+	return rc;
 }
 
 /* work with hotplug and coldplug */
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index 11f3307385d..2bdd8b734af 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -52,13 +52,9 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 	hw.chipset = ide_generic;
 	hw.dev = &ec->dev;
 
-	host = ide_host_alloc(&rapide_port_info, hws);
-	if (host == NULL) {
-		ret = -ENOENT;
+	ret = ide_host_add(&rapide_port_info, hws, &host);
+	if (ret)
 		goto release;
-	}
-
-	ide_host_register(host, &rapide_port_info, hws);
 
 	ecard_set_drvdata(ec, host);
 	goto out;
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 15f76690a48..bde7a585f19 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -191,7 +191,6 @@ static const struct ide_port_info h8300_port_info = {
 
 static int __init h8300_ide_init(void)
 {
-	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
@@ -205,13 +204,7 @@ static int __init h8300_ide_init(void)
 
 	hw_setup(&hw);
 
-	host = ide_host_alloc(&h8300_port_info, hws);
-	if (host == NULL)
-		return -ENOENT;
-
-	ide_host_register(host, &h8300_port_info, hws);
-
-	return 0;
+	return ide_host_add(&h8300_port_info, hws, NULL);
 
 out_busy:
 	printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n");
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index e8818362eb4..a7082c28d06 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -28,9 +28,8 @@ MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
 
 static ssize_t store_add(struct class *cls, const char *buf, size_t n)
 {
-	struct ide_host *host;
 	unsigned int base, ctl;
-	int irq;
+	int irq, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	if (sscanf(buf, "%x:%x:%d", &base, &ctl, &irq) != 3)
@@ -41,11 +40,9 @@ static ssize_t store_add(struct class *cls, const char *buf, size_t n)
 	hw.irq = irq;
 	hw.chipset = ide_generic;
 
-	host = ide_host_alloc(NULL, hws);
-	if (host == NULL)
-		return -ENOENT;
-
-	ide_host_register(host, NULL, hws);
+	rc = ide_host_add(NULL, hws, NULL);
+	if (rc)
+		return rc;
 
 	return n;
 };
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 4458ca61897..bac9b392b68 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -31,6 +31,7 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
 	struct ide_host *host;
 	unsigned long base, ctl;
+	int rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n");
@@ -59,19 +60,18 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	hw.irq = pnp_irq(dev, 0);
 	hw.chipset = ide_generic;
 
-	host = ide_host_alloc(NULL, hws);
-	if (host) {
-		pnp_set_drvdata(dev, host);
+	rc = ide_host_add(NULL, hws, &host);
+	if (rc)
+		goto out;
 
-		ide_host_register(host, NULL, hws);
-
-		return 0;
-	}
+	pnp_set_drvdata(dev, host);
 
+	return 0;
+out:
 	release_region(ctl, 1);
 	release_region(base, 8);
 
-	return -1;
+	return rc;
 }
 
 static void idepnp_remove(struct pnp_dev *dev)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 84a89561ec0..17a104b95d5 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1677,6 +1677,24 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 }
 EXPORT_SYMBOL_GPL(ide_host_register);
 
+int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws,
+		 struct ide_host **hostp)
+{
+	struct ide_host *host;
+
+	host = ide_host_alloc(d, hws);
+	if (host == NULL)
+		return -ENOMEM;
+
+	ide_host_register(host, d, hws);
+
+	if (hostp)
+		*hostp = host;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ide_host_add);
+
 void ide_host_remove(struct ide_host *host)
 {
 	int i;
@@ -1749,7 +1767,6 @@ static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
 
 int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
 {
-	struct ide_host *host;
 	hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
 
 	memset(&hw, 0, sizeof(hw));
@@ -1762,12 +1779,6 @@ int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
 	    (d->host_flags & IDE_HFLAG_SINGLE))
 		return -ENOENT;
 
-	host = ide_host_alloc(d, hws);
-	if (host == NULL)
-		return -ENOMEM;
-
-	ide_host_register(host, d, hws);
-
-	return 0;
+	return ide_host_add(d, hws, NULL);
 }
 EXPORT_SYMBOL_GPL(ide_legacy_device_add);
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 2625667fab4..7c2afa97f41 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -151,7 +151,6 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
 static int __init buddha_init(void)
 {
 	struct zorro_dev *z = NULL;
-	struct ide_host *host;
 	u_long buddha_board = 0;
 	BuddhaType type;
 	int buddha_num_hwifs, i;
@@ -226,9 +225,7 @@ fail_base2:
 			hws[i] = &hw[i];
 		}
 
-		host = ide_host_alloc(NULL, hws);
-		if (host)
-			ide_host_register(host, NULL, hws);
+		ide_host_add(NULL, hws, NULL);
 	}
 
 	return 0;
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index 13d22bded6b..dd5c467d8dd 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -127,7 +127,6 @@ static int __init gayle_init(void)
     unsigned long phys_base, res_start, res_n;
     unsigned long base, ctrlport, irqport;
     ide_ack_intr_t *ack_intr;
-    struct ide_host *host;
     int a4000, i;
     hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
 
@@ -180,11 +179,7 @@ found:
 	hws[i] = &hw[i];
     }
 
-    host = ide_host_alloc(NULL, hws);
-    if (host)
-	ide_host_register(host, NULL, hws);
-
-    return 0;
+    return ide_host_add(NULL, hws, NULL);
 }
 
 module_init(gayle_init);
diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c
index 5935153ef2a..c76d55de699 100644
--- a/drivers/ide/legacy/ide-4drives.c
+++ b/drivers/ide/legacy/ide-4drives.c
@@ -28,7 +28,6 @@ static const struct ide_port_info ide_4drives_port_info = {
 
 static int __init ide_4drives_init(void)
 {
-	struct ide_host *host;
 	unsigned long base = 0x1f0, ctl = 0x3f6;
 	hw_regs_t hw, *hws[] = { &hw, &hw, NULL, NULL };
 
@@ -54,11 +53,7 @@ static int __init ide_4drives_init(void)
 	hw.irq = 14;
 	hw.chipset = ide_4drives;
 
-	host = ide_host_alloc(&ide_4drives_port_info, hws);
-	if (host)
-		ide_host_register(host, &ide_4drives_port_info, hws);
-
-	return 0;
+	return ide_host_add(&ide_4drives_port_info, hws, NULL);
 }
 
 module_init(ide_4drives_init);
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 1a4b9e6887f..21bfac13784 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -162,7 +162,7 @@ static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
 {
     struct ide_host *host;
     ide_hwif_t *hwif;
-    int i;
+    int i, rc;
     hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
     if (!request_region(io, 8, DRV_NAME)) {
@@ -184,12 +184,10 @@ static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
     hw.chipset = ide_pci;
     hw.dev = &handle->dev;
 
-    host = ide_host_alloc(&idecs_port_info, hws);
-    if (host == NULL)
+    rc = ide_host_add(&idecs_port_info, hws, &host);
+    if (rc)
 	goto out_release;
 
-    ide_host_register(host, &idecs_port_info, hws);
-
     hwif = host->ports[0];
 
     if (hwif->present)
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
index 58a942c6a13..051b4ab0f35 100644
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -99,13 +99,9 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 	if (mmio)
 		d.host_flags |= IDE_HFLAG_MMIO;
 
-	host = ide_host_alloc(&d, hws);
-	if (host == NULL) {
-		ret = -ENODEV;
+	ret = ide_host_add(&d, hws, &host);
+	if (ret)
 		goto out;
-	}
-
-	ide_host_register(host, &d, hws);
 
 	platform_set_drvdata(pdev, host);
 
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index b49cf8c2b91..a0bb167980e 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -92,7 +92,6 @@ static const char *mac_ide_name[] =
 static int __init macide_init(void)
 {
 	ide_ack_intr_t *ack_intr;
-	struct ide_host *host;
 	unsigned long base;
 	int irq;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
@@ -125,11 +124,7 @@ static int __init macide_init(void)
 
 	macide_setup_ports(&hw, base, irq, ack_intr);
 
-	host = ide_host_alloc(NULL, hws);
-	if (host)
-		ide_host_register(host, NULL, hws);
-
-	return 0;
+	return ide_host_add(NULL, hws, NULL);
 }
 
 module_init(macide_init);
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 8fb4438a6af..4abd8fc7819 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -131,7 +131,6 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
 
 static int __init q40ide_init(void)
 {
-    struct ide_host *host;
     int i;
     hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
 
@@ -160,11 +159,7 @@ static int __init q40ide_init(void)
 	hws[i] = &hw[i];
     }
 
-    host = ide_host_alloc(&q40ide_port_info, hws);
-    if (host)
-	ide_host_register(host, &q40ide_port_info, hws);
-
-    return 0;
+    return ide_host_add(&q40ide_port_info, hws, NULL);
 }
 
 module_init(q40ide_init);
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 903c628bddd..11b7f61aae4 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -609,13 +609,9 @@ static int au_ide_probe(struct device *dev)
 	hw.dev = dev;
 	hw.chipset = ide_au1xxx;
 
-	host = ide_host_alloc(&au1xxx_port_info, hws);
-	if (host == NULL) {
-		ret = -ENOENT;
+	ret = ide_host_add(&au1xxx_port_info, hws, &host);
+	if (ret)
 		goto out;
-	}
-
-	ide_host_register(host, &au1xxx_port_info, hws);
 
 	auide_hwif.hwif = host->ports[0];
 
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
index b12d9d22483..badf79fc9e3 100644
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -75,7 +75,7 @@ static int __devinit swarm_ide_probe(struct device *dev)
 	u8 __iomem *base;
 	struct ide_host *host;
 	phys_t offset, size;
-	int i;
+	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	if (!SIBYTE_HAVE_IDE)
@@ -115,19 +115,17 @@ static int __devinit swarm_ide_probe(struct device *dev)
 	hw.irq = K_INT_GB_IDE;
 	hw.chipset = ide_generic;
 
-	host = ide_host_alloc(&swarm_port_info, hws);
-	if (host == NULL)
+	rc = ide_host_add(&swarm_port_info, hws, &host);
+	if (rc)
 		goto err;
 
-	ide_host_register(host, &swarm_port_info, hws);
-
 	dev_set_drvdata(dev, host);
 
 	return 0;
 err:
 	release_resource(&swarm_ide_resource);
 	iounmap(base);
-	return -ENOMEM;
+	return rc;
 }
 
 static struct device_driver swarm_ide_driver = {
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 013697b8cef..e6c62006ca1 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -709,7 +709,6 @@ static int cmd640x_init_one(unsigned long base, unsigned long ctl)
  */
 static int __init cmd640x_init(void)
 {
-	struct ide_host *host;
 	int second_port_cmd640 = 0, rc;
 	const char *bus_type, *port2;
 	u8 b, cfr;
@@ -829,11 +828,7 @@ static int __init cmd640x_init(void)
 	cmd640_dump_regs();
 #endif
 
-	host = ide_host_alloc(&cmd640_port_info, hws);
-	if (host)
-		ide_host_register(host, &cmd640_port_info, hws);
-
-	return 1;
+	return ide_host_add(&cmd640_port_info, hws, NULL);
 }
 
 module_param_named(probe_vlb, cmd640_vlb, bool, 0);
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index b8ec06d22c6..b03d8ae947e 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -114,7 +114,6 @@ static const struct ide_port_info cyrix_chipsets[] __devinitdata = {
  
 static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	struct ide_host *host;
 	const struct ide_port_info *d = &cyrix_chipsets[id->driver_data];
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
@@ -140,11 +139,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 
 	ide_pci_setup_ports(dev, d, 14, &hw[0], &hws[0]);
 
-	host = ide_host_alloc(d, hws);
-	if (host)
-		ide_host_register(host, d, hws);
-
-	return 0;
+	return ide_host_add(d, hws, NULL);
 }
 
 static const struct pci_device_id cs5520_pci_tbl[] = {
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index 5eb9d932518..f84bfb4f600 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -86,12 +86,10 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 	hw.dev = &dev->dev;
 	hw.chipset = ide_pci;		/* this enables IRQ sharing */
 
-	host = ide_host_alloc(&delkin_cb_port_info, hws);
-	if (host == NULL)
+	rc = ide_host_add(&delkin_cb_port_info, hws, &host);
+	if (rc)
 		goto out_disable;
 
-	ide_host_register(host, &delkin_cb_port_info, hws);
-
 	pci_set_drvdata(dev, host);
 
 	return 0;
@@ -99,7 +97,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 out_disable:
 	pci_release_regions(dev);
 	pci_disable_device(dev);
-	return -ENODEV;
+	return rc;
 }
 
 static void
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index d5e2ba6bacd..94a7ab86423 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -588,7 +588,7 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 	struct scc_ports *ports = pci_get_drvdata(dev);
 	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	int i;
+	int i, rc;
 
 	memset(&hw, 0, sizeof(hw));
 	for (i = 0; i <= 8; i++)
@@ -597,11 +597,9 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev,
 	hw.dev = &dev->dev;
 	hw.chipset = ide_pci;
 
-	host = ide_host_alloc(d, hws);
-	if (host == NULL)
-		return -ENOMEM;
-
-	ide_host_register(host, d, hws);
+	rc = ide_host_add(d, hws, &host);
+	if (rc)
+		return rc;
 
 	ports->host = host;
 
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index ecd2f28da1b..c521bf6e1bf 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1043,6 +1043,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	ide_hwif_t *hwif;
 	hw_regs_t *hws[] = { hw, NULL, NULL, NULL };
 	struct ide_port_info d = pmac_port_info;
+	int rc;
 
 	pmif->broken_dma = pmif->broken_dma_warn = 0;
 	if (of_device_is_compatible(np, "shasta-ata")) {
@@ -1118,11 +1119,9 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 			 pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
 			 pmif->mediabay ? " (mediabay)" : "", hw->irq);
 
-	host = ide_host_alloc(&d, hws);
-	if (host == NULL)
-		return -ENOENT;
-
-	ide_host_register(host, &d, hws);
+	rc = ide_host_add(&d, hws, &host);
+	if (rc)
+		return rc;
 
 	hwif = host->ports[0];
 
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 1c0c5570dec..b15cad58dc8 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -541,7 +541,6 @@ out:
 
 int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 {
-	struct ide_host *host;
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 	int ret;
 
@@ -551,9 +550,7 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 		/* FIXME: silent failure can happen */
 		ide_pci_setup_ports(dev, d, ret, &hw[0], &hws[0]);
 
-		host = ide_host_alloc(d, hws);
-		if (host)
-			ide_host_register(host, d, hws);
+		ret = ide_host_add(d, hws, NULL);
 	}
 
 	return ret;
@@ -564,7 +561,6 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 			  const struct ide_port_info *d)
 {
 	struct pci_dev *pdev[] = { dev1, dev2 };
-	struct ide_host *host;
 	int ret, i;
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
@@ -582,9 +578,7 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 		ide_pci_setup_ports(pdev[i], d, ret, &hw[i*2], &hws[i*2]);
 	}
 
-	host = ide_host_alloc(d, hws);
-	if (host)
-		ide_host_register(host, d, hws);
+	ret = ide_host_add(d, hws, NULL);
 out:
 	return ret;
 }
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a41ae57fafc..764afd94b91 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1238,6 +1238,8 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **);
 struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
 int ide_host_register(struct ide_host *, const struct ide_port_info *,
 		      hw_regs_t **);
+int ide_host_add(const struct ide_port_info *, hw_regs_t **,
+		 struct ide_host **);
 void ide_host_remove(struct ide_host *);
 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
 void ide_port_unregister_devices(ide_hwif_t *);
-- 
cgit v1.2.3


From e0d0020788543febd10ab933bde0fa181b627f4f Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:57 +0200
Subject: ide: fix ide_host_register() return value

Fix ide_host_register() to fail only if all ports cannot be registered.

While at it:

* Use host->ports[] instead of ide_hwifs[] and remove idx[].

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 38 ++++++++++++++++++--------------------
 1 file changed, 18 insertions(+), 20 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 17a104b95d5..32261282371 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1574,19 +1574,16 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		      hw_regs_t **hws)
 {
 	ide_hwif_t *hwif, *mate = NULL;
-	u8 idx[MAX_HWIFS];
-	int i, rc = 0;
+	int i, j = 0;
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		idx[i] = host->ports[i] ? host->ports[i]->index : 0xff;
+		hwif = host->ports[i];
 
-		if (idx[i] == 0xff) {
+		if (hwif == NULL) {
 			mate = NULL;
 			continue;
 		}
 
-		hwif = &ide_hwifs[idx[i]];
-
 		ide_init_port_hw(hwif, hws[i]);
 		ide_port_apply_params(hwif);
 
@@ -1608,10 +1605,10 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 	}
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		if (idx[i] == 0xff)
-			continue;
+		hwif = host->ports[i];
 
-		hwif = &ide_hwifs[idx[i]];
+		if (hwif == NULL)
+			continue;
 
 		if (ide_probe_port(hwif) == 0)
 			hwif->present = 1;
@@ -1625,19 +1622,20 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 	}
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		if (idx[i] == 0xff)
-			continue;
+		hwif = host->ports[i];
 
-		hwif = &ide_hwifs[idx[i]];
+		if (hwif == NULL)
+			continue;
 
 		if (hwif_init(hwif) == 0) {
 			printk(KERN_INFO "%s: failed to initialize IDE "
 					 "interface\n", hwif->name);
 			hwif->present = 0;
-			rc = -1;
 			continue;
 		}
 
+		j++;
+
 		if (hwif->present)
 			ide_port_setup_devices(hwif);
 
@@ -1648,10 +1646,10 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 	}
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		if (idx[i] == 0xff)
-			continue;
+		hwif = host->ports[i];
 
-		hwif = &ide_hwifs[idx[i]];
+		if (hwif == NULL)
+			continue;
 
 		if (hwif->chipset == ide_unknown)
 			hwif->chipset = ide_generic;
@@ -1661,10 +1659,10 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 	}
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		if (idx[i] == 0xff)
-			continue;
+		hwif = host->ports[i];
 
-		hwif = &ide_hwifs[idx[i]];
+		if (hwif == NULL)
+			continue;
 
 		ide_sysfs_register_port(hwif);
 		ide_proc_register_port(hwif);
@@ -1673,7 +1671,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 			ide_proc_port_register_devices(hwif);
 	}
 
-	return rc;
+	return j ? 0 : -1;
 }
 EXPORT_SYMBOL_GPL(ide_host_register);
 
-- 
cgit v1.2.3


From 8cdf310025bff8c5ef78564f525a8f347952237b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:57 +0200
Subject: ide: fix IDE port slots reservation and freeing (take 2)

* Make ide_find_port_slot() return port slot index.

* Add ide_free_port_slot() helper.

* Move ide_init_port_data() call and error printk() from
  ide_find_port_slot() to ide_host_alloc_all().

* Make ide_{find,free}_port_slot() take ide_cfg_mtx mutex
  and convert them use ide_indexes bitmap to keep track of
  reserved port slots.

* Don't set hwif->chipset in ide_host_alloc_all() as it is
  no longer necessary.

v2:
* Pass the correct slot index to ide_init_port_data().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 87 ++++++++++++++++++++++++++++---------------------
 1 file changed, 50 insertions(+), 37 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 32261282371..fdf00cde9fc 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1470,18 +1470,20 @@ static int ide_sysfs_register_port(ide_hwif_t *hwif)
 	return rc;
 }
 
+static unsigned int ide_indexes;
+
 /**
- *	ide_find_port_slot	-	find free ide_hwifs[] slot
+ *	ide_find_port_slot	-	find free port slot
  *	@d: IDE port info
  *
- *	Return the new hwif.  If we are out of free slots return NULL.
+ *	Return the new port slot index or -ENOENT if we are out of free slots.
  */
 
-static ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d)
+static int ide_find_port_slot(const struct ide_port_info *d)
 {
-	ide_hwif_t *hwif;
-	int i;
+	int idx = -ENOENT;
 	u8 bootable = (d && (d->host_flags & IDE_HFLAG_NON_BOOTABLE)) ? 0 : 1;
+	u8 i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0;;
 
 	/*
 	 * Claim an unassigned slot.
@@ -1493,35 +1495,33 @@ static ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d)
 	 * Unless there is a bootable card that does not use the standard
 	 * ports 0x1f0/0x170 (the ide0/ide1 defaults).
 	 */
-	if (bootable) {
-		i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0;
-
-		for (; i < MAX_HWIFS; i++) {
-			hwif = &ide_hwifs[i];
-			if (hwif->chipset == ide_unknown)
-				goto out_found;
-		}
+	mutex_lock(&ide_cfg_mtx);
+	if (MAX_HWIFS == 1) {
+		if (ide_indexes == 0 && i == 0)
+			idx = 1;
 	} else {
-		for (i = 2; i < MAX_HWIFS; i++) {
-			hwif = &ide_hwifs[i];
-			if (hwif->chipset == ide_unknown)
-				goto out_found;
-		}
-		for (i = 0; i < 2 && i < MAX_HWIFS; i++) {
-			hwif = &ide_hwifs[i];
-			if (hwif->chipset == ide_unknown)
-				goto out_found;
+		if (bootable) {
+			if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1)
+				idx = ffz(ide_indexes | i);
+		} else {
+			if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1)
+				idx = ffz(ide_indexes | 3);
+			else if ((ide_indexes & 3) != 3)
+				idx = ffz(ide_indexes);
 		}
 	}
+	if (idx >= 0)
+		ide_indexes |= (1 << idx);
+	mutex_unlock(&ide_cfg_mtx);
 
-	printk(KERN_ERR "%s: no free slot for interface\n",
-			d ? d->name : "ide");
-
-	return NULL;
+	return idx;
+}
 
-out_found:
-	ide_init_port_data(hwif, i);
-	return hwif;
+static void ide_free_port_slot(int idx)
+{
+	mutex_lock(&ide_cfg_mtx);
+	ide_indexes &= ~(1 << idx);
+	mutex_unlock(&ide_cfg_mtx);
 }
 
 struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
@@ -1536,17 +1536,24 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
 
 	for (i = 0; i < MAX_HWIFS; i++) {
 		ide_hwif_t *hwif;
+		int idx;
 
 		if (hws[i] == NULL)
 			continue;
 
-		hwif = ide_find_port_slot(d);
-		if (hwif) {
-			hwif->chipset = hws[i]->chipset;
-
-			host->ports[i] = hwif;
-			host->n_ports++;
+		idx = ide_find_port_slot(d);
+		if (idx < 0) {
+			printk(KERN_ERR "%s: no free slot for interface\n",
+					d ? d->name : "ide");
+			continue;
 		}
+
+		hwif = &ide_hwifs[idx];
+
+		ide_init_port_data(hwif, idx);
+
+		host->ports[i] = hwif;
+		host->n_ports++;
 	}
 
 	if (host->n_ports == 0) {
@@ -1695,11 +1702,17 @@ EXPORT_SYMBOL_GPL(ide_host_add);
 
 void ide_host_remove(struct ide_host *host)
 {
+	ide_hwif_t *hwif;
 	int i;
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		if (host->ports[i])
-			ide_unregister(host->ports[i]);
+		hwif = host->ports[i];
+
+		if (hwif == NULL)
+			continue;
+
+		ide_unregister(hwif);
+		ide_free_port_slot(hwif->index);
 	}
 
 	kfree(host);
-- 
cgit v1.2.3


From 6059143ae34f30bb49ec8733468315284f78e2da Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:58 +0200
Subject: ide: move ide_remove_port_from_hwgroup() to ide-probe.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 35 +++++++++++++++++++++++++++++++++++
 drivers/ide/ide.c       | 35 -----------------------------------
 2 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index fdf00cde9fc..21cdd9ca14d 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -992,6 +992,41 @@ static void ide_port_setup_devices(ide_hwif_t *hwif)
 	mutex_unlock(&ide_cfg_mtx);
 }
 
+void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
+{
+	ide_hwgroup_t *hwgroup = hwif->hwgroup;
+
+	spin_lock_irq(&ide_lock);
+	/*
+	 * Remove us from the hwgroup, and free
+	 * the hwgroup if we were the only member
+	 */
+	if (hwif->next == hwif) {
+		BUG_ON(hwgroup->hwif != hwif);
+		kfree(hwgroup);
+	} else {
+		/* There is another interface in hwgroup.
+		 * Unlink us, and set hwgroup->drive and ->hwif to
+		 * something sane.
+		 */
+		ide_hwif_t *g = hwgroup->hwif;
+
+		while (g->next != hwif)
+			g = g->next;
+		g->next = hwif->next;
+		if (hwgroup->hwif == hwif) {
+			/* Chose a random hwif for hwgroup->hwif.
+			 * It's guaranteed that there are no drives
+			 * left in the hwgroup.
+			 */
+			BUG_ON(hwgroup->drive != NULL);
+			hwgroup->hwif = g;
+		}
+		BUG_ON(hwgroup->hwif == hwif);
+	}
+	spin_unlock_irq(&ide_lock);
+}
+
 /*
  * This routine sets up the irq for an ide interface, and creates a new
  * hwgroup for the irq/hwif if none was previously assigned.
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 7e9575d1aee..60c5db1c59e 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -133,41 +133,6 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif)
 	}
 }
 
-void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
-{
-	ide_hwgroup_t *hwgroup = hwif->hwgroup;
-
-	spin_lock_irq(&ide_lock);
-	/*
-	 * Remove us from the hwgroup, and free
-	 * the hwgroup if we were the only member
-	 */
-	if (hwif->next == hwif) {
-		BUG_ON(hwgroup->hwif != hwif);
-		kfree(hwgroup);
-	} else {
-		/* There is another interface in hwgroup.
-		 * Unlink us, and set hwgroup->drive and ->hwif to
-		 * something sane.
-		 */
-		ide_hwif_t *g = hwgroup->hwif;
-
-		while (g->next != hwif)
-			g = g->next;
-		g->next = hwif->next;
-		if (hwgroup->hwif == hwif) {
-			/* Chose a random hwif for hwgroup->hwif.
-			 * It's guaranteed that there are no drives
-			 * left in the hwgroup.
-			 */
-			BUG_ON(hwgroup->drive != NULL);
-			hwgroup->hwif = g;
-		}
-		BUG_ON(hwgroup->hwif == hwif);
-	}
-	spin_unlock_irq(&ide_lock);
-}
-
 /* Called with ide_lock held. */
 static void __ide_port_unregister_devices(ide_hwif_t *hwif)
 {
-- 
cgit v1.2.3


From af1cbba37343c827e116638b097b94f5e6c38963 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:58 +0200
Subject: ide: add ide_ports[]

* Add ide_ports[] table keeping pointers to all initialized ports.

* Set ide_ports[] entry for a given port in init_irq() and clear it
  ide_remove_port_from_hwgroup().

* Convert init_irq() to use ide_ports[] instead of ide_hwifs[] for
  grouping ports into hwgroup.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 21cdd9ca14d..482f41f3f15 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -992,10 +992,14 @@ static void ide_port_setup_devices(ide_hwif_t *hwif)
 	mutex_unlock(&ide_cfg_mtx);
 }
 
+static ide_hwif_t *ide_ports[MAX_HWIFS];
+
 void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
 {
 	ide_hwgroup_t *hwgroup = hwif->hwgroup;
 
+	ide_ports[hwif->index] = NULL;
+
 	spin_lock_irq(&ide_lock);
 	/*
 	 * Remove us from the hwgroup, and free
@@ -1054,8 +1058,9 @@ static int init_irq (ide_hwif_t *hwif)
 	 * Group up with any other hwifs that share our irq(s).
 	 */
 	for (index = 0; index < MAX_HWIFS; index++) {
-		ide_hwif_t *h = &ide_hwifs[index];
-		if (h->hwgroup) {  /* scan only initialized hwif's */
+		ide_hwif_t *h = ide_ports[index];
+
+		if (h && h->hwgroup) {  /* scan only initialized ports */
 			if (hwif->irq == h->irq) {
 				hwif->sharing_irq = h->sharing_irq = 1;
 				if (hwif->chipset != ide_pci ||
@@ -1109,6 +1114,8 @@ static int init_irq (ide_hwif_t *hwif)
 		hwgroup->timer.data = (unsigned long) hwgroup;
 	}
 
+	ide_ports[hwif->index] = hwif;
+
 	/*
 	 * Allocate the irq, if not already obtained for another hwif
 	 */
-- 
cgit v1.2.3


From 18de10170df31d34b342612f1c896a16a52f0a5c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:58 +0200
Subject: ide: allocate ide_hwif_t instances dynamically

* Allocate ide_hwif_t instances dynamically and remove ide_hwifs[].

  This cuts almost ~14kB from ide-probe.o (x86-32, MAX_HWIFS == 10):

   text    data     bss     dec     hex filename
   9140      40   14084   23264    5ae0 drivers/ide/ide-probe.o.before
   9169      40      44    9253    2425 drivers/ide/ide-probe.o.after

* Remove no longer needed ide_init_port_data() call from ide_unregister().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 10 ++++++----
 drivers/ide/ide.c       |  5 -----
 2 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 482f41f3f15..6d57b7cd542 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -39,8 +39,6 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-static ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */
-
 /**
  *	generic_id		-	add a generic drive id
  *	@drive:	drive to make an ID block for
@@ -1583,15 +1581,18 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
 		if (hws[i] == NULL)
 			continue;
 
+		hwif = kzalloc(sizeof(*hwif), GFP_KERNEL);
+		if (hwif == NULL)
+			continue;
+
 		idx = ide_find_port_slot(d);
 		if (idx < 0) {
 			printk(KERN_ERR "%s: no free slot for interface\n",
 					d ? d->name : "ide");
+			kfree(hwif);
 			continue;
 		}
 
-		hwif = &ide_hwifs[idx];
-
 		ide_init_port_data(hwif, idx);
 
 		host->ports[i] = hwif;
@@ -1755,6 +1756,7 @@ void ide_host_remove(struct ide_host *host)
 
 		ide_unregister(hwif);
 		ide_free_port_slot(hwif->index);
+		kfree(hwif);
 	}
 
 	kfree(host);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 60c5db1c59e..914942a766d 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -233,11 +233,6 @@ void ide_unregister(ide_hwif_t *hwif)
 	if (hwif->dma_base)
 		ide_release_dma_engine(hwif);
 
-	spin_lock_irq(&ide_lock);
-	/* restore hwif data to pristine status */
-	ide_init_port_data(hwif, hwif->index);
-	spin_unlock_irq(&ide_lock);
-
 	mutex_unlock(&ide_cfg_mtx);
 }
 
-- 
cgit v1.2.3


From 8a69580e1ea9516caada5eed202afd39546e9809 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 23 Jul 2008 19:55:59 +0200
Subject: ide: add ide_host_free() helper (take 2)

* Add ide_host_free() helper and convert ide_host_remove() to use it.

* Fix handling of ide_host_register() failure in ide_host_add(),
  icside.c, ide-generic.c, falconide.c and sgiioc4.c.

While at it:

* Fix handling of ide_host_alloc_all() failure in ide-generic.c.

* Fix handling of ide_host_alloc() failure in falconide.c
  (also return the correct error value if no device is found).

v2:
* falconide build fix. (From Stephen Rothwell)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/icside.c       | 21 +++++++++++++++++----
 drivers/ide/ide-generic.c      | 27 +++++++++++++++++++++++----
 drivers/ide/ide-probe.c        | 23 ++++++++++++++++++++---
 drivers/ide/legacy/falconide.c | 22 +++++++++++++++++-----
 drivers/ide/pci/sgiioc4.c      | 14 ++++++++++----
 include/linux/ide.h            |  1 +
 6 files changed, 88 insertions(+), 20 deletions(-)

diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 6fa58425466..f575e8341ae 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -445,6 +445,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 	void __iomem *base;
 	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	int ret;
 
 	base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
 	if (!base)
@@ -472,9 +473,15 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 
 	ecard_set_drvdata(ec, state);
 
-	ide_host_register(host, NULL, hws);
+	ret = ide_host_register(host, NULL, hws);
+	if (ret)
+		goto err_free;
 
 	return 0;
+err_free:
+	ide_host_free(host);
+	ecard_set_drvdata(ec, NULL);
+	return ret;
 }
 
 static const struct ide_port_info icside_v6_port_info __initdata = {
@@ -547,11 +554,17 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 		d.dma_ops = NULL;
 	}
 
-	ide_host_register(host, &d, hws);
+	ret = ide_host_register(host, NULL, hws);
+	if (ret)
+		goto err_free;
 
 	return 0;
-
- out:
+err_free:
+	ide_host_free(host);
+	if (d.dma_ops)
+		free_dma(ec->dma);
+	ecard_set_drvdata(ec, NULL);
+out:
 	return ret;
 }
 
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index a7082c28d06..31d98fec775 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -84,13 +84,14 @@ static int __init ide_generic_init(void)
 {
 	hw_regs_t hw[MAX_HWIFS], *hws[MAX_HWIFS];
 	struct ide_host *host;
-	int i;
+	unsigned long io_addr;
+	int i, rc;
 
 	printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
 			 "parameter for probing all legacy ISA IDE ports\n");
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		unsigned long io_addr = ide_default_io_base(i);
+		io_addr = ide_default_io_base(i);
 
 		hws[i] = NULL;
 
@@ -120,14 +121,32 @@ static int __init ide_generic_init(void)
 	}
 
 	host = ide_host_alloc_all(NULL, hws);
-	if (host)
-		ide_host_register(host, NULL, hws);
+	if (host == NULL) {
+		rc = -ENOMEM;
+		goto err;
+	}
+
+	rc = ide_host_register(host, NULL, hws);
+	if (rc)
+		goto err_free;
 
 	if (ide_generic_sysfs_init())
 		printk(KERN_ERR DRV_NAME ": failed to create ide_generic "
 					 "class\n");
 
 	return 0;
+err_free:
+	ide_host_free(host);
+err:
+	for (i = 0; i < MAX_HWIFS; i++) {
+		if (hws[i] == NULL)
+			continue;
+
+		io_addr = hws[i]->io_ports.data_addr;
+		release_region(io_addr + 0x206, 1);
+		release_region(io_addr, 8);
+	}
+	return rc;
 }
 
 module_init(ide_generic_init);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 6d57b7cd542..0ead4537fc6 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1729,12 +1729,17 @@ int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws,
 		 struct ide_host **hostp)
 {
 	struct ide_host *host;
+	int rc;
 
 	host = ide_host_alloc(d, hws);
 	if (host == NULL)
 		return -ENOMEM;
 
-	ide_host_register(host, d, hws);
+	rc = ide_host_register(host, d, hws);
+	if (rc) {
+		ide_host_free(host);
+		return rc;
+	}
 
 	if (hostp)
 		*hostp = host;
@@ -1743,7 +1748,7 @@ int ide_host_add(const struct ide_port_info *d, hw_regs_t **hws,
 }
 EXPORT_SYMBOL_GPL(ide_host_add);
 
-void ide_host_remove(struct ide_host *host)
+void ide_host_free(struct ide_host *host)
 {
 	ide_hwif_t *hwif;
 	int i;
@@ -1754,13 +1759,25 @@ void ide_host_remove(struct ide_host *host)
 		if (hwif == NULL)
 			continue;
 
-		ide_unregister(hwif);
 		ide_free_port_slot(hwif->index);
 		kfree(hwif);
 	}
 
 	kfree(host);
 }
+EXPORT_SYMBOL_GPL(ide_host_free);
+
+void ide_host_remove(struct ide_host *host)
+{
+	int i;
+
+	for (i = 0; i < MAX_HWIFS; i++) {
+		if (host->ports[i])
+			ide_unregister(host->ports[i]);
+	}
+
+	ide_host_free(host);
+}
 EXPORT_SYMBOL_GPL(ide_host_remove);
 
 void ide_port_scan(ide_hwif_t *hwif)
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 4eb5c3f9fec..724f95073d8 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -114,9 +114,10 @@ static int __init falconide_init(void)
 {
 	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
+	int rc;
 
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
-		return 0;
+		return -ENODEV;
 
 	printk(KERN_INFO "ide: Falcon IDE controller\n");
 
@@ -128,13 +129,24 @@ static int __init falconide_init(void)
 	falconide_setup_ports(&hw);
 
 	host = ide_host_alloc(&falconide_port_info, hws);
-	if (host) {
-		ide_get_lock(NULL, NULL);
-		ide_host_register(host, &falconide_port_info, hws);
-		ide_release_lock();
+	if (host == NULL) {
+		rc = -ENOMEM;
+		goto err;
 	}
 
+	ide_get_lock(NULL, NULL);
+	rc = ide_host_register(host, &falconide_port_info, hws);
+	ide_release_lock();
+
+	if (rc)
+		goto err_free;
+
 	return 0;
+err_free:
+	ide_host_free(host);
+err:
+	release_mem_region(ATA_HD_BASE, 0x40);
+	return rc;
 }
 
 module_init(falconide_init);
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 440f43a86ad..42eef19a18f 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -603,6 +603,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 	struct ide_port_info d = sgiioc4_port_info;
+	int rc;
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
 	bar0 = pci_resource_start(dev, 0);
@@ -638,17 +639,22 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
 	host = ide_host_alloc(&d, hws);
-	if (host == NULL)
+	if (host == NULL) {
+		rc = -ENOMEM;
 		goto err;
+	}
 
-	if (ide_host_register(host, &d, hws))
-		return -EIO;
+	rc = ide_host_register(host, &d, hws);
+	if (rc)
+		goto err_free;
 
 	return 0;
+err_free:
+	ide_host_free(host);
 err:
 	release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
 	iounmap(virt_base);
-	return -ENOMEM;
+	return rc;
 }
 
 static unsigned int __devinit
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 764afd94b91..46d5bfe2fef 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1236,6 +1236,7 @@ void ide_port_apply_params(ide_hwif_t *);
 
 struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **);
 struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
+void ide_host_free(struct ide_host *);
 int ide_host_register(struct ide_host *, const struct ide_port_info *,
 		      hw_regs_t **);
 int ide_host_add(const struct ide_port_info *, hw_regs_t **,
-- 
cgit v1.2.3


From 4b5075050072ed7c4730ee547ae80117c4fa8513 Mon Sep 17 00:00:00 2001
From: Darren Jenkins <darrenrjenkins@gmail.com>
Date: Wed, 23 Jul 2008 19:55:59 +0200
Subject: drivers/ide/ide-tape.c: remove double kfree

Coverity CID: 2336 USE_AFTER_FREE

drivers/ide/ide-tape.c ide_tape_kfree_buffer() double free's a pointer
(hint freed by an alias in first outer loop).

This patch simply removes the superfluous kfree().

Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: gadio@netvision.net.il
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 0af128826f1..663671f69f8 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -585,7 +585,6 @@ static void ide_tape_kfree_buffer(idetape_tape_t *tape)
 		bh = bh->b_reqnext;
 		kfree(prev_bh);
 	}
-	kfree(tape->merge_bh);
 }
 
 static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
-- 
cgit v1.2.3


From d7c26ebb5bca284ece9db7311a9e180aabae1922 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:55:59 +0200
Subject: ide: push pc callback pointer into the ide_drive_t structure

Refrain from carrying the callback ptr with every packet command since the
callback function is only one anyways. ide_drive_t is probably not the most
suitable place for it right now but is the more sane solution. Besides, these
structs are going to be reorganized anyways during the generic ide rewrite.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/linux/ide.h | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/include/linux/ide.h b/include/linux/ide.h
index 46d5bfe2fef..a28823297ed 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -308,7 +308,7 @@ struct ide_acpi_drive_link;
 struct ide_acpi_hwif_link;
 #endif
 
-typedef struct ide_drive_s {
+struct ide_drive_s {
 	char		name[4];	/* drive name, such as "hda" */
         char            driver_req[10];	/* requests specific driver */
 
@@ -400,7 +400,12 @@ typedef struct ide_drive_s {
 	struct list_head list;
 	struct device	gendev;
 	struct completion gendev_rel_comp;	/* to deal with device release() */
-} ide_drive_t;
+
+	/* callback for packet commands */
+	void (*pc_callback)(struct ide_drive_s *);
+};
+
+typedef struct ide_drive_s ide_drive_t;
 
 #define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
 
-- 
cgit v1.2.3


From 2207fa5af1507ea018fc95e777276edb1ca5601a Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:55:59 +0200
Subject: ide-floppy: use drive->pc_callback instead of pc->callback

It is important that drive->pc_callback is set prior to enabling IRQs on the
device since this is called from the IRQ handler. Otherwise it hurts as I learnt
the hard way from the several "Kernel panic - not synching: Fatal exception in
interrupt" during the weekend :).

The if-else block in the IRQ handler is only temporary so that bisect searches
don't break and it'll be removed after converting the remainder of the drivers.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-atapi.c  | 10 ++++++++--
 drivers/ide/ide-floppy.c |  4 ++--
 2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 6789b81ea78..0c4f45247d8 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -31,7 +31,10 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	debug_log("Enter %s - interrupt handler\n", __func__);
 
 	if (pc->flags & PC_FLAG_TIMEDOUT) {
-		pc->callback(drive);
+		if (drive->media == ide_floppy)
+			drive->pc_callback(drive);
+		else
+			pc->callback(drive);
 		return ide_stopped;
 	}
 
@@ -97,7 +100,10 @@ cmd_finished:
 			return ide_stopped;
 		}
 		/* Command finished - Call the callback function */
-		pc->callback(drive);
+		if (drive->media == ide_floppy)
+			drive->pc_callback(drive);
+		else
+			pc->callback(drive);
 		return ide_stopped;
 	}
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 62be2b27f23..44b53896f10 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -354,7 +354,6 @@ static void idefloppy_init_pc(struct ide_atapi_pc *pc)
 	memset(pc, 0, sizeof(*pc));
 	pc->buf = pc->pc_buf;
 	pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE;
-	pc->callback = ide_floppy_callback;
 }
 
 static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
@@ -474,7 +473,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 		pc->error = IDEFLOPPY_ERROR_GENERAL;
 
 		floppy->failed_pc = NULL;
-		pc->callback(drive);
+		drive->pc_callback(drive);
 		return ide_stopped;
 	}
 
@@ -1040,6 +1039,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
 
 	*((u16 *) &gcw) = drive->id->config;
 	floppy->pc = floppy->pc_stack;
+	drive->pc_callback = ide_floppy_callback;
 
 	if (((gcw[0] & 0x60) >> 5) == 1)
 		floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT;
-- 
cgit v1.2.3


From 776bb0270ea72c40f95347dcac868c9f602dcb3e Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:55:59 +0200
Subject: ide-tape: use drive->pc_callback instead of pc->callback

The if-else block in the IRQ handler is only temporary so that bisect searches
don't break and it'll be removed after converting the remainder of the drivers.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-atapi.c | 4 ++--
 drivers/ide/ide-tape.c  | 7 ++++---
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 0c4f45247d8..d5249dfc554 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -31,7 +31,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	debug_log("Enter %s - interrupt handler\n", __func__);
 
 	if (pc->flags & PC_FLAG_TIMEDOUT) {
-		if (drive->media == ide_floppy)
+		if (drive->media == ide_floppy || drive->media == ide_tape)
 			drive->pc_callback(drive);
 		else
 			pc->callback(drive);
@@ -100,7 +100,7 @@ cmd_finished:
 			return ide_stopped;
 		}
 		/* Command finished - Call the callback function */
-		if (drive->media == ide_floppy)
+		if (drive->media == ide_floppy || drive->media == ide_tape)
 			drive->pc_callback(drive);
 		else
 			pc->callback(drive);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 663671f69f8..38ca7b1b7cf 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -689,7 +689,6 @@ static void idetape_init_pc(struct ide_atapi_pc *pc)
 	pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
 	pc->bh = NULL;
 	pc->b_data = NULL;
-	pc->callback = ide_tape_callback;
 }
 
 static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
@@ -886,7 +885,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 			pc->error = IDETAPE_ERROR_GENERAL;
 		}
 		tape->failed_pc = NULL;
-		pc->callback(drive);
+		drive->pc_callback(drive);
 		return ide_stopped;
 	}
 	debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
@@ -948,7 +947,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
 		pc->error = IDETAPE_ERROR_GENERAL;
 		tape->failed_pc = NULL;
 	}
-	pc->callback(drive);
+	drive->pc_callback(drive);
 	return ide_stopped;
 }
 
@@ -2465,6 +2464,8 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 	u8 gcw[2];
 	u16 *ctl = (u16 *)&tape->caps[12];
 
+	drive->pc_callback = ide_tape_callback;
+
 	spin_lock_init(&tape->lock);
 	drive->dsc_overlap = 1;
 	if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
-- 
cgit v1.2.3


From db9d286988b9e905045c536f681e85fa5e3a728b Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:55:59 +0200
Subject: ide-scsi: use drive->pc_callback instead of pc->callback

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-atapi.c | 10 ++--------
 drivers/scsi/ide-scsi.c |  5 +++--
 2 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index d5249dfc554..0e9eeb08da2 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -31,10 +31,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	debug_log("Enter %s - interrupt handler\n", __func__);
 
 	if (pc->flags & PC_FLAG_TIMEDOUT) {
-		if (drive->media == ide_floppy || drive->media == ide_tape)
-			drive->pc_callback(drive);
-		else
-			pc->callback(drive);
+		drive->pc_callback(drive);
 		return ide_stopped;
 	}
 
@@ -100,10 +97,7 @@ cmd_finished:
 			return ide_stopped;
 		}
 		/* Command finished - Call the callback function */
-		if (drive->media == ide_floppy || drive->media == ide_tape)
-			drive->pc_callback(drive);
-		else
-			pc->callback(drive);
+		drive->pc_callback(drive);
 		return ide_stopped;
 	}
 
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 659db3f7ae0..37cfec43bd4 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -229,7 +229,6 @@ static int idescsi_check_condition(ide_drive_t *drive,
 	rq->cmd_type = REQ_TYPE_SENSE;
 	rq->cmd_flags |= REQ_PREEMPT;
 	pc->timeout = jiffies + WAIT_READY;
-	pc->callback = ide_scsi_callback;
 	/* NOTE! Save the failed packet command in "rq->buffer" */
 	rq->buffer = (void *) failed_cmd->special;
 	pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd;
@@ -465,6 +464,9 @@ static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)
 #if IDESCSI_DEBUG_LOG
 	set_bit(IDESCSI_LOG_CMD, &scsi->log);
 #endif /* IDESCSI_DEBUG_LOG */
+
+	drive->pc_callback = ide_scsi_callback;
+
 	idescsi_add_settings(drive);
 }
 
@@ -616,7 +618,6 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
 	pc->scsi_cmd = cmd;
 	pc->done = done;
 	pc->timeout = jiffies + cmd->timeout_per_command;
-	pc->callback = ide_scsi_callback;
 
 	if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
 		printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
-- 
cgit v1.2.3


From 8bcda3bc492c56abed33a8cbf824c410d7ce69f0 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:00 +0200
Subject: ide: remove pc->callback member from ide_atapi_pc

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/linux/ide.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/ide.h b/include/linux/ide.h
index a28823297ed..d8ec8afb4ef 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -662,8 +662,6 @@ struct ide_atapi_pc {
 	 */
 	u8 pc_buf[256];
 
-	void (*callback)(ide_drive_t *);
-
 	/* idetape only */
 	struct idetape_bh *bh;
 	char *b_data;
-- 
cgit v1.2.3


From 20cd93be67f967c57e5abf62bf5652a00c66b9f0 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:00 +0200
Subject: ide-floppy: pass packet command in rq->cmd

Make a redundant copy of the packet command bits into rq->cmd.
Later, after all drivers have been converted, it'll be
switched to use that in the common code instead of pc->c.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-floppy.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 44b53896f10..cbf84f2e9cc 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -291,6 +291,7 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->cmd_flags |= REQ_PREEMPT;
 	rq->rq_disk = floppy->disk;
+	memcpy(rq->cmd, pc->c, 12);
 	ide_do_drive_cmd(drive, rq);
 }
 
@@ -573,6 +574,8 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
 	put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
 	put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
 
+	memcpy(rq->cmd, pc->c, 12);
+
 	pc->rq = rq;
 	pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
 	if (rq->cmd_flags & REQ_RW)
@@ -670,6 +673,7 @@ static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->buffer = (char *) pc;
 	rq->cmd_type = REQ_TYPE_SPECIAL;
+	memcpy(rq->cmd, pc->c, 12);
 	error = blk_execute_rq(drive->queue, floppy->disk, rq, 0);
 	blk_put_request(rq);
 
-- 
cgit v1.2.3


From 83dd573513471c67f9cc93a88795c25a91ebf4b3 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:00 +0200
Subject: ide-tape: make room for packet command ids in rq->cmd

ide-tape uses rq->cmd for special commands from the chrdev interface so move
those to byte 13 (BLK_MAX_CDB = 16) since a packet cmd is max 12 bytes.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 38ca7b1b7cf..f43ffb88d84 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -703,7 +703,7 @@ static void idetape_init_rq(struct request *rq, u8 cmd)
 {
 	blk_rq_init(NULL, rq);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
-	rq->cmd[0] = cmd;
+	rq->cmd[13] = cmd;
 }
 
 /*
@@ -1019,7 +1019,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	 */
 	stat = hwif->tp_ops->read_status(hwif);
 
-	if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
+	if (!drive->dsc_overlap && !(rq->cmd[13] & REQ_IDETAPE_PC2))
 		set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
 
 	if (drive->post_reset == 1) {
@@ -1036,7 +1036,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 		} else if (time_after(jiffies, tape->dsc_timeout)) {
 			printk(KERN_ERR "ide-tape: %s: DSC timeout\n",
 				tape->name);
-			if (rq->cmd[0] & REQ_IDETAPE_PC2) {
+			if (rq->cmd[13] & REQ_IDETAPE_PC2) {
 				idetape_media_access_finished(drive);
 				return ide_stopped;
 			} else {
@@ -1049,27 +1049,27 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 		idetape_postpone_request(drive);
 		return ide_stopped;
 	}
-	if (rq->cmd[0] & REQ_IDETAPE_READ) {
+	if (rq->cmd[13] & REQ_IDETAPE_READ) {
 		pc = idetape_next_pc_storage(drive);
 		ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
 					(struct idetape_bh *)rq->special,
 					READ_6);
 		goto out;
 	}
-	if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
+	if (rq->cmd[13] & REQ_IDETAPE_WRITE) {
 		pc = idetape_next_pc_storage(drive);
 		ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
 					 (struct idetape_bh *)rq->special,
 					 WRITE_6);
 		goto out;
 	}
-	if (rq->cmd[0] & REQ_IDETAPE_PC1) {
+	if (rq->cmd[13] & REQ_IDETAPE_PC1) {
 		pc = (struct ide_atapi_pc *) rq->buffer;
-		rq->cmd[0] &= ~(REQ_IDETAPE_PC1);
-		rq->cmd[0] |= REQ_IDETAPE_PC2;
+		rq->cmd[13] &= ~(REQ_IDETAPE_PC1);
+		rq->cmd[13] |= REQ_IDETAPE_PC2;
 		goto out;
 	}
-	if (rq->cmd[0] & REQ_IDETAPE_PC2) {
+	if (rq->cmd[13] & REQ_IDETAPE_PC2) {
 		idetape_media_access_finished(drive);
 		return ide_stopped;
 	}
@@ -1281,7 +1281,7 @@ static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
-	rq->cmd[0] = REQ_IDETAPE_PC1;
+	rq->cmd[13] = REQ_IDETAPE_PC1;
 	rq->buffer = (char *)pc;
 	error = blk_execute_rq(drive->queue, tape->disk, rq, 0);
 	blk_put_request(rq);
@@ -1465,7 +1465,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
 
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
 	rq->cmd_type = REQ_TYPE_SPECIAL;
-	rq->cmd[0] = cmd;
+	rq->cmd[13] = cmd;
 	rq->rq_disk = tape->disk;
 	rq->special = (void *)bh;
 	rq->sector = tape->first_frame;
-- 
cgit v1.2.3


From 0014c75be31d9fa7435105afa9960374a82cc55c Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:00 +0200
Subject: ide-tape: pass packet command in rq->cmd

Make a redundant copy of the packet command bits into rq->cmd. Later, after
all drivers have been converted, it'll be switched to use that in the
common code instead of pc->c. While at it, simplify ide_tape_create_rw_cmd.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index f43ffb88d84..a6d4e484aae 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -730,6 +730,7 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	rq->cmd_flags |= REQ_PREEMPT;
 	rq->buffer = (char *) pc;
 	rq->rq_disk = tape->disk;
+	memcpy(rq->cmd, pc->c, 12);
 	ide_do_drive_cmd(drive, rq);
 }
 
@@ -952,9 +953,12 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
 }
 
 static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
-		struct ide_atapi_pc *pc, unsigned int length,
-		struct idetape_bh *bh, u8 opcode)
+				   struct ide_atapi_pc *pc, struct request *rq,
+				   u8 opcode)
 {
+	struct idetape_bh *bh = (struct idetape_bh *)rq->special;
+	unsigned int length = rq->current_nr_sectors;
+
 	idetape_init_pc(pc);
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
@@ -974,6 +978,8 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 		pc->b_data = bh->b_data;
 		pc->b_count = atomic_read(&bh->b_count);
 	}
+
+	memcpy(rq->cmd, pc->c, 12);
 }
 
 static ide_startstop_t idetape_do_request(ide_drive_t *drive,
@@ -1051,16 +1057,12 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	}
 	if (rq->cmd[13] & REQ_IDETAPE_READ) {
 		pc = idetape_next_pc_storage(drive);
-		ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
-					(struct idetape_bh *)rq->special,
-					READ_6);
+		ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
 		goto out;
 	}
 	if (rq->cmd[13] & REQ_IDETAPE_WRITE) {
 		pc = idetape_next_pc_storage(drive);
-		ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
-					 (struct idetape_bh *)rq->special,
-					 WRITE_6);
+		ide_tape_create_rw_cmd(tape, pc, rq, WRITE_6);
 		goto out;
 	}
 	if (rq->cmd[13] & REQ_IDETAPE_PC1) {
@@ -1283,6 +1285,7 @@ static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->cmd[13] = REQ_IDETAPE_PC1;
 	rq->buffer = (char *)pc;
+	memcpy(rq->cmd, pc->c, 12);
 	error = blk_execute_rq(drive->queue, tape->disk, rq, 0);
 	blk_put_request(rq);
 	return error;
-- 
cgit v1.2.3


From 08feacf3bcc20c33e6a2a91d85d8190dd219d967 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:00 +0200
Subject: ide-scsi: pass packet command in rq->cmd

Make a redundant copy of the packet command bits into rq->cmd.
Later, after all drivers have been converted, it'll be
switched to use that in the common code instead of pc->c.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/scsi/ide-scsi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 37cfec43bd4..1ec43932001 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -237,6 +237,7 @@ static int idescsi_check_condition(ide_drive_t *drive,
 		ide_scsi_hex_dump(pc->c, 6);
 	}
 	rq->rq_disk = scsi->disk;
+	memcpy(rq->cmd, pc->c, 12);
 	ide_do_drive_cmd(drive, rq);
 	return 0;
 }
@@ -632,6 +633,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
 	rq->special = (char *) pc;
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	spin_unlock_irq(host->host_lock);
+	memcpy(rq->cmd, pc->c, 12);
 	blk_execute_rq_nowait(drive->queue, scsi->disk, rq, 0, NULL);
 	spin_lock_irq(host->host_lock);
 	return 0;
-- 
cgit v1.2.3


From 8fccf8995c6d462db50265a5f7fa9a288a5a4590 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:01 +0200
Subject: ide: use rq->cmd instead of pc->c in atapi common code

There should be no functionality change resulting from this patch.

[bart: s/HWGROUP(drive)/hwif->hwgroup/]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-atapi.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 0e9eeb08da2..f848010c15a 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -22,6 +22,7 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
 {
 	ide_hwif_t *hwif = drive->hwif;
+	struct request *rq = hwif->hwgroup->rq;
 	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	xfer_func_t *xferfunc;
 	unsigned int temp;
@@ -64,8 +65,9 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 		local_irq_enable_in_hardirq();
 
 		if (drive->media == ide_tape && !scsi &&
-		    (stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
+		    (stat & ERR_STAT) && rq->cmd[0] == REQUEST_SENSE)
 			stat &= ~ERR_STAT;
+
 		if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
 			/* Error detected */
 			debug_log("%s: I/O error\n", drive->name);
@@ -76,16 +78,17 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
 					goto cmd_finished;
 			}
 
-			if (pc->c[0] == REQUEST_SENSE) {
+			if (rq->cmd[0] == REQUEST_SENSE) {
 				printk(KERN_ERR "%s: I/O error in request sense"
 						" command\n", drive->name);
 				return ide_do_reset(drive);
 			}
 
-			debug_log("[cmd %x]: check condition\n", pc->c[0]);
+			debug_log("[cmd %x]: check condition\n", rq->cmd[0]);
 
 			/* Retry operation */
 			retry_pc(drive);
+
 			/* queued, but not started */
 			return ide_stopped;
 		}
@@ -96,8 +99,10 @@ cmd_finished:
 			dsc_handle(drive);
 			return ide_stopped;
 		}
+
 		/* Command finished - Call the callback function */
 		drive->pc_callback(drive);
+
 		return ide_stopped;
 	}
 
@@ -116,6 +121,7 @@ cmd_finished:
 		printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
 		return ide_do_reset(drive);
 	}
+
 	if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
 		/* Hopefully, we will never get here */
 		printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
@@ -124,6 +130,7 @@ cmd_finished:
 				(ireason & IO) ? "Read" : "Write");
 		return ide_do_reset(drive);
 	}
+
 	if (!(pc->flags & PC_FLAG_WRITING)) {
 		/* Reading - Check that we have enough space */
 		temp = pc->xferred + bcount;
@@ -174,7 +181,7 @@ cmd_finished:
 	pc->cur_pos += bcount;
 
 	debug_log("[cmd %x] transferred %d bytes on that intr.\n",
-		  pc->c[0], bcount);
+		  rq->cmd[0], bcount);
 
 	/* And set the interrupt handler again */
 	ide_set_handler(drive, handler, timeout, expiry);
@@ -220,6 +227,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
 				ide_expiry_t *expiry)
 {
 	ide_hwif_t *hwif = drive->hwif;
+	struct request *rq = hwif->hwgroup->rq;
 	ide_startstop_t startstop;
 	u8 ireason;
 
@@ -250,7 +258,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
 
 	/* Send the actual packet */
 	if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0)
-		hwif->tp_ops->output_data(drive, NULL, pc->c, 12);
+		hwif->tp_ops->output_data(drive, NULL, rq->cmd, 12);
 
 	return ide_started;
 }
-- 
cgit v1.2.3


From 3b8ac5398ca8137b41aa5da4d9fad89153450aaa Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:01 +0200
Subject: ide: add per-device flags

Push device flags up into ide_drive_t.

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/linux/ide.h | 60 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/include/linux/ide.h b/include/linux/ide.h
index d8ec8afb4ef..fcf2d1bede0 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -308,6 +308,64 @@ struct ide_acpi_drive_link;
 struct ide_acpi_hwif_link;
 #endif
 
+/* ATAPI device flags */
+enum {
+	IDE_AFLAG_DRQ_INTERRUPT		= (1 << 0),
+	IDE_AFLAG_MEDIA_CHANGED		= (1 << 1),
+
+	/* ide-cd */
+	/* Drive cannot lock the door. */
+	IDE_AFLAG_NO_DOORLOCK		= (1 << 2),
+	/* Drive cannot eject the disc. */
+	IDE_AFLAG_NO_EJECT		= (1 << 3),
+	/* Drive is a pre ATAPI 1.2 drive. */
+	IDE_AFLAG_PRE_ATAPI12		= (1 << 4),
+	/* TOC addresses are in BCD. */
+	IDE_AFLAG_TOCADDR_AS_BCD	= (1 << 5),
+	/* TOC track numbers are in BCD. */
+	IDE_AFLAG_TOCTRACKS_AS_BCD	= (1 << 6),
+	/*
+	 * Drive does not provide data in multiples of SECTOR_SIZE
+	 * when more than one interrupt is needed.
+	 */
+	IDE_AFLAG_LIMIT_NFRAMES		= (1 << 7),
+	/* Seeking in progress. */
+	IDE_AFLAG_SEEKING		= (1 << 8),
+	/* Saved TOC information is current. */
+	IDE_AFLAG_TOC_VALID		= (1 << 9),
+	/* We think that the drive door is locked. */
+	IDE_AFLAG_DOOR_LOCKED		= (1 << 10),
+	/* SET_CD_SPEED command is unsupported. */
+	IDE_AFLAG_NO_SPEED_SELECT	= (1 << 11),
+	IDE_AFLAG_VERTOS_300_SSD	= (1 << 12),
+	IDE_AFLAG_VERTOS_600_ESD	= (1 << 13),
+	IDE_AFLAG_SANYO_3CD		= (1 << 14),
+	IDE_AFLAG_FULL_CAPS_PAGE	= (1 << 15),
+	IDE_AFLAG_PLAY_AUDIO_OK		= (1 << 16),
+	IDE_AFLAG_LE_SPEED_FIELDS	= (1 << 17),
+
+	/* ide-floppy */
+	/* Format in progress */
+	IDE_AFLAG_FORMAT_IN_PROGRESS	= (1 << 18),
+	/* Avoid commands not supported in Clik drive */
+	IDE_AFLAG_CLIK_DRIVE		= (1 << 19),
+	/* Requires BH algorithm for packets */
+	IDE_AFLAG_ZIP_DRIVE		= (1 << 20),
+
+	/* ide-tape */
+	IDE_AFLAG_IGNORE_DSC		= (1 << 21),
+	/* 0 When the tape position is unknown */
+	IDE_AFLAG_ADDRESS_VALID		= (1 <<	22),
+	/* Device already opened */
+	IDE_AFLAG_BUSY			= (1 << 23),
+	/* Attempt to auto-detect the current user block size */
+	IDE_AFLAG_DETECT_BS		= (1 << 24),
+	/* Currently on a filemark */
+	IDE_AFLAG_FILEMARK		= (1 << 25),
+	/* 0 = no tape is loaded, so we don't rewind after ejecting */
+	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 26)
+};
+
 struct ide_drive_s {
 	char		name[4];	/* drive name, such as "hda" */
         char            driver_req[10];	/* requests specific driver */
@@ -403,6 +461,8 @@ struct ide_drive_s {
 
 	/* callback for packet commands */
 	void (*pc_callback)(struct ide_drive_s *);
+
+	unsigned long atapi_flags;
 };
 
 typedef struct ide_drive_s ide_drive_t;
-- 
cgit v1.2.3


From ea68d270ff55bcdfa5d07697eb68103b5b02c7bb Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:01 +0200
Subject: ide-floppy: convert to using the new atapi_flags (take 2)

while at it, remove PC_FLAG_ZIP_DRIVE from the packed command flags altogether
and query the drive type through drive->atapi_flags.

v2:
ide-floppy fix.

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-atapi.c  |  5 ++--
 drivers/ide/ide-floppy.c | 73 ++++++++++++++++++------------------------------
 include/linux/ide.h      |  3 +-
 3 files changed, 31 insertions(+), 50 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index f848010c15a..711a5f6d35e 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -257,7 +257,7 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	}
 
 	/* Send the actual packet */
-	if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0)
+	if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0)
 		hwif->tp_ops->output_data(drive, NULL, rq->cmd, 12);
 
 	return ide_started;
@@ -302,7 +302,8 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
 			   bcount, dma);
 
 	/* Issue the packet command */
-	if (pc->flags & PC_FLAG_DRQ_INTERRUPT) {
+	if ((pc->flags & PC_FLAG_DRQ_INTERRUPT) ||
+	    (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT)) {
 		ide_execute_command(drive, WIN_PACKETCMD, handler,
 				    timeout, NULL);
 		return ide_started;
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index cbf84f2e9cc..3d8e6dd0f41 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -125,26 +125,10 @@ typedef struct ide_floppy_obj {
 	int wp;
 	/* Supports format progress report */
 	int srfp;
-	/* Status/Action flags */
-	unsigned long flags;
 } idefloppy_floppy_t;
 
 #define IDEFLOPPY_TICKS_DELAY	HZ/20	/* default delay for ZIP 100 (50ms) */
 
-/* Floppy flag bits values. */
-enum {
-	/* DRQ interrupt device */
-	IDEFLOPPY_FLAG_DRQ_INTERRUPT		= (1 <<	0),
-	/* Media may have changed */
-	IDEFLOPPY_FLAG_MEDIA_CHANGED		= (1 << 1),
-	/* Format in progress */
-	IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS	= (1 << 2),
-	/* Avoid commands not supported in Clik drive */
-	IDEFLOPPY_FLAG_CLIK_DRIVE		= (1 << 3),
-	/* Requires BH algorithm for packets */
-	IDEFLOPPY_FLAG_ZIP_DRIVE		= (1 << 4),
-};
-
 /* Defines for the MODE SENSE command */
 #define MODE_SENSE_CURRENT		0x00
 #define MODE_SENSE_CHANGEABLE		0x01
@@ -429,7 +413,7 @@ static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
 	 * 40 and 50msec work well. idefloppy_pc_intr will not be actually
 	 * used until after the packet is moved in about 50 msec.
 	 */
-	if (pc->flags & PC_FLAG_ZIP_DRIVE) {
+	if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
 		timeout = floppy->ticks;
 		expiry = &idefloppy_transfer_pc;
 	} else {
@@ -649,12 +633,6 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
 		return ide_stopped;
 	}
 
-	if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT)
-		pc->flags |= PC_FLAG_DRQ_INTERRUPT;
-
-	if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE)
-		pc->flags |= PC_FLAG_ZIP_DRIVE;
-
 	pc->rq = rq;
 
 	return idefloppy_issue_pc(drive, pc);
@@ -798,7 +776,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 		switch (pc.buf[desc_start + 4] & 0x03) {
 		/* Clik! drive returns this instead of CAPACITY_CURRENT */
 		case CAPACITY_UNFORMATTED:
-			if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
+			if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
 				/*
 				 * If it is not a clik drive, break out
 				 * (maintains previous driver behaviour)
@@ -844,7 +822,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 	}
 
 	/* Clik! disk does not support get_flexible_disk_page */
-	if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
+	if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
 		(void) ide_floppy_get_flexible_disk_page(drive);
 
 	set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor);
@@ -1046,7 +1024,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
 	drive->pc_callback = ide_floppy_callback;
 
 	if (((gcw[0] & 0x60) >> 5) == 1)
-		floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT;
+		drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
 	/*
 	 * We used to check revisions here. At this point however I'm giving up.
 	 * Just assume they are all broken, its easier.
@@ -1057,7 +1035,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
 	 * we'll leave the limitation below for the 2.2.x tree.
 	 */
 	if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
-		floppy->flags |= IDEFLOPPY_FLAG_ZIP_DRIVE;
+		drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
 		/* This value will be visible in the /proc/ide/hdx/settings */
 		floppy->ticks = IDEFLOPPY_TICKS_DELAY;
 		blk_queue_max_sectors(drive->queue, 64);
@@ -1069,7 +1047,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
 	 */
 	if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
 		blk_queue_max_sectors(drive->queue, 64);
-		floppy->flags |= IDEFLOPPY_FLAG_CLIK_DRIVE;
+		drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
 	}
 
 	(void) ide_floppy_get_capacity(drive);
@@ -1158,7 +1136,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
 	floppy->openers++;
 
 	if (floppy->openers == 1) {
-		floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
+		drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
 		/* Just in case */
 
 		idefloppy_init_pc(&pc);
@@ -1185,14 +1163,14 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
 			ret = -EROFS;
 			goto out_put_floppy;
 		}
-		floppy->flags |= IDEFLOPPY_FLAG_MEDIA_CHANGED;
+		drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
 		/* IOMEGA Clik! drives do not support lock/unlock commands */
-		if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
+		if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) {
 			idefloppy_create_prevent_cmd(&pc, 1);
 			(void) idefloppy_queue_pc_tail(drive, &pc);
 		}
 		check_disk_change(inode->i_bdev);
-	} else if (floppy->flags & IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS) {
+	} else if (drive->atapi_flags & IDE_AFLAG_FORMAT_IN_PROGRESS) {
 		ret = -EBUSY;
 		goto out_put_floppy;
 	}
@@ -1215,12 +1193,12 @@ static int idefloppy_release(struct inode *inode, struct file *filp)
 
 	if (floppy->openers == 1) {
 		/* IOMEGA Clik! drives do not support lock/unlock commands */
-		if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
+		if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) {
 			idefloppy_create_prevent_cmd(&pc, 0);
 			(void) idefloppy_queue_pc_tail(drive, &pc);
 		}
 
-		floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
+		drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
 	}
 
 	floppy->openers--;
@@ -1241,15 +1219,17 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 	return 0;
 }
 
-static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy,
-		struct ide_atapi_pc *pc, unsigned long arg, unsigned int cmd)
+static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
+			       unsigned long arg, unsigned int cmd)
 {
+	idefloppy_floppy_t *floppy = drive->driver_data;
+
 	if (floppy->openers > 1)
 		return -EBUSY;
 
 	/* The IOMEGA Clik! Drive doesn't support this command -
 	 * no room for an eject mechanism */
-	if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) {
+	if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) {
 		int prevent = arg ? 1 : 0;
 
 		if (cmd == CDROMEJECT)
@@ -1270,16 +1250,17 @@ static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy,
 static int ide_floppy_format_unit(idefloppy_floppy_t *floppy,
 				  int __user *arg)
 {
-	int blocks, length, flags, err = 0;
 	struct ide_atapi_pc pc;
+	ide_drive_t *drive = floppy->drive;
+	int blocks, length, flags, err = 0;
 
 	if (floppy->openers > 1) {
 		/* Don't format if someone is using the disk */
-		floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
+		drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
 		return -EBUSY;
 	}
 
-	floppy->flags |= IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
+	drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS;
 
 	/*
 	 * Send ATAPI_FORMAT_UNIT to the drive.
@@ -1303,15 +1284,15 @@ static int ide_floppy_format_unit(idefloppy_floppy_t *floppy,
 		goto out;
 	}
 
-	(void) idefloppy_get_sfrp_bit(floppy->drive);
+	(void) idefloppy_get_sfrp_bit(drive);
 	idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
 
-	if (idefloppy_queue_pc_tail(floppy->drive, &pc))
+	if (idefloppy_queue_pc_tail(drive, &pc))
 		err = -EIO;
 
 out:
 	if (err)
-		floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS;
+		drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
 	return err;
 }
 
@@ -1330,7 +1311,7 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
 	case CDROMEJECT:
 		/* fall through */
 	case CDROM_LOCKDOOR:
-		return ide_floppy_lockdoor(floppy, &pc, arg, cmd);
+		return ide_floppy_lockdoor(drive, &pc, arg, cmd);
 	case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
 		return 0;
 	case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
@@ -1371,8 +1352,8 @@ static int idefloppy_media_changed(struct gendisk *disk)
 		drive->attach = 0;
 		return 0;
 	}
-	ret = !!(floppy->flags & IDEFLOPPY_FLAG_MEDIA_CHANGED);
-	floppy->flags &= ~IDEFLOPPY_FLAG_MEDIA_CHANGED;
+	ret = !!(drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED);
+	drive->atapi_flags &= ~IDE_AFLAG_MEDIA_CHANGED;
 	return ret;
 }
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index fcf2d1bede0..147bfee1fe7 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -687,8 +687,7 @@ enum {
 	PC_FLAG_WRITING			= (1 << 6),
 	/* command timed out */
 	PC_FLAG_TIMEDOUT		= (1 << 7),
-	PC_FLAG_ZIP_DRIVE		= (1 << 8),
-	PC_FLAG_DRQ_INTERRUPT		= (1 << 9),
+	PC_FLAG_DRQ_INTERRUPT		= (1 << 8),
 };
 
 struct ide_atapi_pc {
-- 
cgit v1.2.3


From f2e3ab52afb3b05879b9d82a05740cd924993325 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:01 +0200
Subject: ide-tape: convert to using the new atapi_flags

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c | 68 +++++++++++++++++---------------------------------
 1 file changed, 23 insertions(+), 45 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a6d4e484aae..6962ca4891a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -195,23 +195,6 @@ enum {
 #define IDETAPE_BLOCK_DESCRIPTOR	0
 #define IDETAPE_CAPABILITIES_PAGE	0x2a
 
-/* Tape flag bits values. */
-enum {
-	IDETAPE_FLAG_IGNORE_DSC		= (1 << 0),
-	/* 0 When the tape position is unknown */
-	IDETAPE_FLAG_ADDRESS_VALID	= (1 <<	1),
-	/* Device already opened */
-	IDETAPE_FLAG_BUSY		= (1 << 2),
-	/* Attempt to auto-detect the current user block size */
-	IDETAPE_FLAG_DETECT_BS		= (1 << 3),
-	/* Currently on a filemark */
-	IDETAPE_FLAG_FILEMARK		= (1 << 4),
-	/* DRQ interrupt device */
-	IDETAPE_FLAG_DRQ_INTERRUPT	= (1 << 5),
-	/* 0 = no tape is loaded, so we don't rewind after ejecting */
-	IDETAPE_FLAG_MEDIUM_PRESENT	= (1 << 6),
-};
-
 /*
  * Most of our global data which we need to save even as we leave the driver due
  * to an interrupt or a timer event is stored in the struct defined below.
@@ -312,8 +295,6 @@ typedef struct ide_tape_obj {
 	/* Wasted space in each stage */
 	int excess_bh_size;
 
-	/* Status/Action flags: long for set_bit */
-	unsigned long flags;
 	/* protects the ide-tape queue */
 	spinlock_t lock;
 
@@ -664,7 +645,7 @@ static void ide_tape_callback(ide_drive_t *drive)
 		if (readpos[0] & 0x4) {
 			printk(KERN_INFO "ide-tape: Block location is unknown"
 					 "to the tape\n");
-			clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+			clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
 			uptodate = 0;
 		} else {
 			debug_log(DBG_SENSE, "Block Location - %u\n",
@@ -672,7 +653,7 @@ static void ide_tape_callback(ide_drive_t *drive)
 
 			tape->partition = readpos[1];
 			tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]);
-			set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
+			set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
 		}
 	}
 
@@ -741,7 +722,6 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
  */
 static void idetape_retry_pc(ide_drive_t *drive)
 {
-	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc *pc;
 	struct request *rq;
 
@@ -749,7 +729,7 @@ static void idetape_retry_pc(ide_drive_t *drive)
 	pc = idetape_next_pc_storage(drive);
 	rq = idetape_next_rq_storage(drive);
 	idetape_create_request_sense_cmd(pc);
-	set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
+	set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
 	idetape_queue_pc_head(drive, pc, rq);
 }
 
@@ -1026,14 +1006,14 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	stat = hwif->tp_ops->read_status(hwif);
 
 	if (!drive->dsc_overlap && !(rq->cmd[13] & REQ_IDETAPE_PC2))
-		set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
+		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
 
 	if (drive->post_reset == 1) {
-		set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
+		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
 		drive->post_reset = 0;
 	}
 
-	if (!test_and_clear_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags) &&
+	if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
 	    (stat & SEEK_STAT) == 0) {
 		if (postponed_rq == NULL) {
 			tape->dsc_polling_start = jiffies;
@@ -1076,10 +1056,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 		return ide_stopped;
 	}
 	BUG();
-out:
-	if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags))
-		pc->flags |= PC_FLAG_DRQ_INTERRUPT;
 
+out:
 	return idetape_issue_pc(drive, pc);
 }
 
@@ -1307,7 +1285,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
 	int load_attempted = 0;
 
 	/* Wait for the tape to become ready */
-	set_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
+	set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
 	timeout += jiffies;
 	while (time_before(jiffies, timeout)) {
 		idetape_create_test_unit_ready_cmd(&pc);
@@ -1400,7 +1378,7 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
 	if (tape->chrdev_dir != IDETAPE_DIR_READ)
 		return;
 
-	clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags);
+	clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags);
 	tape->merge_bh_size = 0;
 	if (tape->merge_bh != NULL) {
 		ide_tape_kfree_buffer(tape);
@@ -1639,7 +1617,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
 	debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
 
 	/* If we are at a filemark, return a read length of 0 */
-	if (test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
+	if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
 		return 0;
 
 	idetape_init_read(drive);
@@ -1749,7 +1727,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ) {
 		tape->merge_bh_size = 0;
-		if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
+		if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
 			++count;
 		ide_tape_discard_merge_buffer(drive, 0);
 	}
@@ -1804,7 +1782,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 	debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
 
 	if (tape->chrdev_dir != IDETAPE_DIR_READ) {
-		if (test_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags))
+		if (test_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags))
 			if (count > tape->blk_size &&
 			    (count % tape->blk_size) == 0)
 				tape->user_bs_factor = count / tape->blk_size;
@@ -1844,7 +1822,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
 		tape->merge_bh_size = bytes_read-temp;
 	}
 finish:
-	if (!actually_read && test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) {
+	if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
 		debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
 
 		idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -2030,7 +2008,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 					      !IDETAPE_LU_LOAD_MASK);
 		retval = idetape_queue_pc_tail(drive, &pc);
 		if (!retval)
-			clear_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
+			clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
 		return retval;
 	case MTNOP:
 		ide_tape_discard_merge_buffer(drive, 0);
@@ -2053,9 +2031,9 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			    mt_count % tape->blk_size)
 				return -EIO;
 			tape->user_bs_factor = mt_count / tape->blk_size;
-			clear_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
+			clear_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
 		} else
-			set_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
+			set_bit(IDE_AFLAG_DETECT_BS, &drive->atapi_flags);
 		return 0;
 	case MTSEEK:
 		ide_tape_discard_merge_buffer(drive, 0);
@@ -2205,20 +2183,20 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = tape;
 
-	if (test_and_set_bit(IDETAPE_FLAG_BUSY, &tape->flags)) {
+	if (test_and_set_bit(IDE_AFLAG_BUSY, &drive->atapi_flags)) {
 		retval = -EBUSY;
 		goto out_put_tape;
 	}
 
 	retval = idetape_wait_ready(drive, 60 * HZ);
 	if (retval) {
-		clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
+		clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
 		printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
 		goto out_put_tape;
 	}
 
 	idetape_read_position(drive);
-	if (!test_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags))
+	if (!test_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags))
 		(void)idetape_rewind_tape(drive);
 
 	/* Read block size and write protect status from drive. */
@@ -2234,7 +2212,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 	if (tape->write_prot) {
 		if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
 		    (filp->f_flags & O_ACCMODE) == O_RDWR) {
-			clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
+			clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
 			retval = -EROFS;
 			goto out_put_tape;
 		}
@@ -2294,7 +2272,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 			ide_tape_discard_merge_buffer(drive, 1);
 	}
 
-	if (minor < 128 && test_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags))
+	if (minor < 128 && test_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags))
 		(void) idetape_rewind_tape(drive);
 	if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
 		if (tape->door_locked == DOOR_LOCKED) {
@@ -2304,7 +2282,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
 			}
 		}
 	}
-	clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
+	clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
 	ide_tape_put(tape);
 	unlock_kernel();
 	return 0;
@@ -2489,7 +2467,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
 
 	/* Command packet DRQ type */
 	if (((gcw[0] & 0x60) >> 5) == 1)
-		set_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags);
+		set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
 
 	idetape_get_inquiry_results(drive);
 	idetape_get_mode_sense_results(drive);
-- 
cgit v1.2.3


From be4c916e96bcde629463d7577d4c402c7f6e6f3e Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:01 +0200
Subject: ide-scsi: convert to using the new atapi_flags

Remove unused IDESCSI_PC_RQ while at it.

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/scsi/ide-scsi.c | 17 +----------------
 1 file changed, 1 insertion(+), 16 deletions(-)

diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 1ec43932001..538552495d4 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -84,7 +84,6 @@ typedef struct ide_scsi_obj {
 	struct Scsi_Host	*host;
 
 	struct ide_atapi_pc *pc;		/* Current packet command */
-	unsigned long flags;			/* Status/Action flags */
 	unsigned long transform;		/* SCSI cmd translation layer */
 	unsigned long log;			/* log flags */
 } idescsi_scsi_t;
@@ -125,16 +124,6 @@ static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive)
 	return scsihost_to_idescsi(ide_drive->driver_data);
 }
 
-/*
- *	Per ATAPI device status bits.
- */
-#define IDESCSI_DRQ_INTERRUPT		0	/* DRQ interrupt device */
-
-/*
- *	ide-scsi requests.
- */
-#define IDESCSI_PC_RQ			90
-
 /*
  *	PIO data transfer routine using the scatter gather table.
  */
@@ -421,10 +410,6 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r
 
 	if (blk_sense_request(rq) || blk_special_request(rq)) {
 		struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special;
-		idescsi_scsi_t *scsi = drive_to_idescsi(drive);
-
-		if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags))
-			pc->flags |= PC_FLAG_DRQ_INTERRUPT;
 
 		if (drive->using_dma && !idescsi_map_sg(drive, pc))
 			pc->flags |= PC_FLAG_DMA_OK;
@@ -460,7 +445,7 @@ static inline void idescsi_add_settings(ide_drive_t *drive) { ; }
 static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi)
 {
 	if (drive->id && (drive->id->config & 0x0060) == 0x20)
-		set_bit (IDESCSI_DRQ_INTERRUPT, &scsi->flags);
+		set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
 	clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
 #if IDESCSI_DEBUG_LOG
 	set_bit(IDESCSI_LOG_CMD, &scsi->log);
-- 
cgit v1.2.3


From ac77ef8b03677c8ae8afe77bccc5f6a969193a79 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:01 +0200
Subject: ide: remove unused PC_FLAG_DRQ_INTERRUPT

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-atapi.c | 3 +--
 include/linux/ide.h     | 1 -
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 711a5f6d35e..adf04f99cde 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -302,8 +302,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
 			   bcount, dma);
 
 	/* Issue the packet command */
-	if ((pc->flags & PC_FLAG_DRQ_INTERRUPT) ||
-	    (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT)) {
+	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
 		ide_execute_command(drive, WIN_PACKETCMD, handler,
 				    timeout, NULL);
 		return ide_started;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 147bfee1fe7..d67ccca2b96 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -687,7 +687,6 @@ enum {
 	PC_FLAG_WRITING			= (1 << 6),
 	/* command timed out */
 	PC_FLAG_TIMEDOUT		= (1 << 7),
-	PC_FLAG_DRQ_INTERRUPT		= (1 << 8),
 };
 
 struct ide_atapi_pc {
-- 
cgit v1.2.3


From 570f89ea5f3ee93756dc2293b83bdfedb8d35348 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Wed, 23 Jul 2008 19:56:02 +0200
Subject: ide-cd: convert to using the new atapi_flags

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c       | 108 ++++++++++++++++++++++-----------------------
 drivers/ide/ide-cd.h       |  38 ----------------
 drivers/ide/ide-cd_ioctl.c |  27 +++++-------
 3 files changed, 64 insertions(+), 109 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index d9798ca433b..52fe3b95dc9 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -85,10 +85,8 @@ static void ide_cd_put(struct cdrom_info *cd)
 /* Mark that we've seen a media change and invalidate our internal buffers. */
 static void cdrom_saw_media_change(ide_drive_t *drive)
 {
-	struct cdrom_info *cd = drive->driver_data;
-
-	cd->cd_flags |= IDE_CD_FLAG_MEDIA_CHANGED;
-	cd->cd_flags &= ~IDE_CD_FLAG_TOC_VALID;
+	drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
+	drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
 }
 
 static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
@@ -529,7 +527,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
 	ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
 			   xferlen, info->dma);
 
-	if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) {
+	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
 		/* waiting for CDB interrupt, not DMA yet. */
 		if (info->dma)
 			drive->waiting_for_dma = 0;
@@ -561,7 +559,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
 	struct cdrom_info *info = drive->driver_data;
 	ide_startstop_t startstop;
 
-	if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) {
+	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
 		/*
 		 * Here we should have been called after receiving an interrupt
 		 * from the device.  DRQ should how be set.
@@ -648,20 +646,18 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
  */
 static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
 {
-	struct cdrom_info *cd = drive->driver_data;
-
 	if ((len % SECTOR_SIZE) == 0)
 		return 0;
 
 	printk(KERN_ERR "%s: %s: Bad transfer size %d\n",
 			drive->name, __func__, len);
 
-	if (cd->cd_flags & IDE_CD_FLAG_LIMIT_NFRAMES)
+	if (drive->atapi_flags & IDE_AFLAG_LIMIT_NFRAMES)
 		printk(KERN_ERR "  This drive is not supported by "
 				"this version of the driver\n");
 	else {
 		printk(KERN_ERR "  Trying to limit transfer sizes\n");
-		cd->cd_flags |= IDE_CD_FLAG_LIMIT_NFRAMES;
+		drive->atapi_flags |= IDE_AFLAG_LIMIT_NFRAMES;
 	}
 
 	return 1;
@@ -738,7 +734,7 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)
 	if (cdrom_decode_status(drive, 0, &stat))
 		return ide_stopped;
 
-	info->cd_flags |= IDE_CD_FLAG_SEEKING;
+	drive->atapi_flags |= IDE_AFLAG_SEEKING;
 
 	if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
 		if (--retry == 0)
@@ -1197,7 +1193,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 	int xferlen;
 
 	if (blk_fs_request(rq)) {
-		if (info->cd_flags & IDE_CD_FLAG_SEEKING) {
+		if (drive->atapi_flags & IDE_AFLAG_SEEKING) {
 			ide_hwif_t *hwif = drive->hwif;
 			unsigned long elapsed = jiffies - info->start_seek;
 			int stat = hwif->tp_ops->read_status(hwif);
@@ -1211,7 +1207,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 				printk(KERN_ERR "%s: DSC timeout\n",
 						drive->name);
 			}
-			info->cd_flags &= ~IDE_CD_FLAG_SEEKING;
+			drive->atapi_flags &= ~IDE_AFLAG_SEEKING;
 		}
 		if (rq_data_dir(rq) == READ &&
 		    IDE_LARGE_SEEK(info->last_block, block,
@@ -1369,7 +1365,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 	 */
 	(void) cdrom_check_status(drive, sense);
 
-	if (info->cd_flags & IDE_CD_FLAG_TOC_VALID)
+	if (drive->atapi_flags & IDE_AFLAG_TOC_VALID)
 		return 0;
 
 	/* try to get the total cdrom capacity and sector size */
@@ -1391,7 +1387,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 	if (stat)
 		return stat;
 
-	if (info->cd_flags & IDE_CD_FLAG_TOCTRACKS_AS_BCD) {
+	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
 		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
 		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
 	}
@@ -1432,7 +1428,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 		if (stat)
 			return stat;
 
-		if (info->cd_flags & IDE_CD_FLAG_TOCTRACKS_AS_BCD) {
+		if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
 			toc->hdr.first_track = (u8)BIN2BCD(CDROM_LEADOUT);
 			toc->hdr.last_track = (u8)BIN2BCD(CDROM_LEADOUT);
 		} else {
@@ -1446,14 +1442,14 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 
 	toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
 
-	if (info->cd_flags & IDE_CD_FLAG_TOCTRACKS_AS_BCD) {
+	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
 		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
 		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
 	}
 
 	for (i = 0; i <= ntracks; i++) {
-		if (info->cd_flags & IDE_CD_FLAG_TOCADDR_AS_BCD) {
-			if (info->cd_flags & IDE_CD_FLAG_TOCTRACKS_AS_BCD)
+		if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
+			if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
 				toc->ent[i].track = BCD2BIN(toc->ent[i].track);
 			msf_from_bcd(&toc->ent[i].addr.msf);
 		}
@@ -1476,7 +1472,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 		toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
 	}
 
-	if (info->cd_flags & IDE_CD_FLAG_TOCADDR_AS_BCD) {
+	if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
 		/* re-read multisession information using MSF format */
 		stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
 					   sizeof(ms_tmp), sense);
@@ -1500,7 +1496,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 	}
 
 	/* Remember that we've read this stuff. */
-	info->cd_flags |= IDE_CD_FLAG_TOC_VALID;
+	drive->atapi_flags |= IDE_AFLAG_TOC_VALID;
 
 	return 0;
 }
@@ -1512,7 +1508,7 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
 	struct packet_command cgc;
 	int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE;
 
-	if ((info->cd_flags & IDE_CD_FLAG_FULL_CAPS_PAGE) == 0)
+	if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0)
 		size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;
 
 	init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN);
@@ -1533,7 +1529,7 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
 	curspeed = *(u16 *)&buf[8 + 14];
 	maxspeed = *(u16 *)&buf[8 +  8];
 
-	if (cd->cd_flags & IDE_CD_FLAG_LE_SPEED_FIELDS) {
+	if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) {
 		curspeed = le16_to_cpu(curspeed);
 		maxspeed = le16_to_cpu(maxspeed);
 	} else {
@@ -1579,7 +1575,7 @@ static int ide_cdrom_register(ide_drive_t *drive, int nslots)
 	devinfo->handle = drive;
 	strcpy(devinfo->name, drive->name);
 
-	if (info->cd_flags & IDE_CD_FLAG_NO_SPEED_SELECT)
+	if (drive->atapi_flags & IDE_AFLAG_NO_SPEED_SELECT)
 		devinfo->mask |= CDC_SELECT_SPEED;
 
 	devinfo->disk = info->disk;
@@ -1605,8 +1601,8 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
 		return nslots;
 	}
 
-	if (cd->cd_flags & IDE_CD_FLAG_PRE_ATAPI12) {
-		cd->cd_flags &= ~IDE_CD_FLAG_NO_EJECT;
+	if (drive->atapi_flags & IDE_AFLAG_PRE_ATAPI12) {
+		drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
 		cdi->mask &= ~CDC_PLAY_AUDIO;
 		return nslots;
 	}
@@ -1624,9 +1620,9 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
 		return 0;
 
 	if ((buf[8 + 6] & 0x01) == 0)
-		cd->cd_flags |= IDE_CD_FLAG_NO_DOORLOCK;
+		drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
 	if (buf[8 + 6] & 0x08)
-		cd->cd_flags &= ~IDE_CD_FLAG_NO_EJECT;
+		drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
 	if (buf[8 + 3] & 0x01)
 		cdi->mask &= ~CDC_CD_R;
 	if (buf[8 + 3] & 0x02)
@@ -1637,7 +1633,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
 		cdi->mask &= ~(CDC_DVD_RAM | CDC_RAM);
 	if (buf[8 + 3] & 0x10)
 		cdi->mask &= ~CDC_DVD_R;
-	if ((buf[8 + 4] & 0x01) || (cd->cd_flags & IDE_CD_FLAG_PLAY_AUDIO_OK))
+	if ((buf[8 + 4] & 0x01) || (drive->atapi_flags & IDE_AFLAG_PLAY_AUDIO_OK))
 		cdi->mask &= ~CDC_PLAY_AUDIO;
 
 	mechtype = buf[8 + 6] >> 5;
@@ -1802,43 +1798,43 @@ static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; }
 
 static const struct cd_list_entry ide_cd_quirks_list[] = {
 	/* Limit transfer size per interrupt. */
-	{ "SAMSUNG CD-ROM SCR-2430", NULL,   IDE_CD_FLAG_LIMIT_NFRAMES	    },
-	{ "SAMSUNG CD-ROM SCR-2432", NULL,   IDE_CD_FLAG_LIMIT_NFRAMES	    },
+	{ "SAMSUNG CD-ROM SCR-2430", NULL,   IDE_AFLAG_LIMIT_NFRAMES	     },
+	{ "SAMSUNG CD-ROM SCR-2432", NULL,   IDE_AFLAG_LIMIT_NFRAMES	     },
 	/* SCR-3231 doesn't support the SET_CD_SPEED command. */
-	{ "SAMSUNG CD-ROM SCR-3231", NULL,   IDE_CD_FLAG_NO_SPEED_SELECT    },
+	{ "SAMSUNG CD-ROM SCR-3231", NULL,   IDE_AFLAG_NO_SPEED_SELECT	     },
 	/* Old NEC260 (not R) was released before ATAPI 1.2 spec. */
-	{ "NEC CD-ROM DRIVE:260",    "1.01", IDE_CD_FLAG_TOCADDR_AS_BCD |
-					     IDE_CD_FLAG_PRE_ATAPI12,	    },
+	{ "NEC CD-ROM DRIVE:260",    "1.01", IDE_AFLAG_TOCADDR_AS_BCD |
+					     IDE_AFLAG_PRE_ATAPI12,	     },
 	/* Vertos 300, some versions of this drive like to talk BCD. */
-	{ "V003S0DS",		     NULL,   IDE_CD_FLAG_VERTOS_300_SSD,    },
+	{ "V003S0DS",		     NULL,   IDE_AFLAG_VERTOS_300_SSD,	     },
 	/* Vertos 600 ESD. */
-	{ "V006E0DS",		     NULL,   IDE_CD_FLAG_VERTOS_600_ESD,    },
+	{ "V006E0DS",		     NULL,   IDE_AFLAG_VERTOS_600_ESD,	     },
 	/*
 	 * Sanyo 3 CD changer uses a non-standard command for CD changing
 	 * (by default standard ATAPI support for CD changers is used).
 	 */
-	{ "CD-ROM CDR-C3 G",	     NULL,   IDE_CD_FLAG_SANYO_3CD	    },
-	{ "CD-ROM CDR-C3G",	     NULL,   IDE_CD_FLAG_SANYO_3CD	    },
-	{ "CD-ROM CDR_C36",	     NULL,   IDE_CD_FLAG_SANYO_3CD	    },
+	{ "CD-ROM CDR-C3 G",	     NULL,   IDE_AFLAG_SANYO_3CD	     },
+	{ "CD-ROM CDR-C3G",	     NULL,   IDE_AFLAG_SANYO_3CD	     },
+	{ "CD-ROM CDR_C36",	     NULL,   IDE_AFLAG_SANYO_3CD	     },
 	/* Stingray 8X CD-ROM. */
-	{ "STINGRAY 8422 IDE 8X CD-ROM 7-27-95", NULL, IDE_CD_FLAG_PRE_ATAPI12},
+	{ "STINGRAY 8422 IDE 8X CD-ROM 7-27-95", NULL, IDE_AFLAG_PRE_ATAPI12 },
 	/*
 	 * ACER 50X CD-ROM and WPI 32X CD-ROM require the full spec length
 	 * mode sense page capabilities size, but older drives break.
 	 */
-	{ "ATAPI CD ROM DRIVE 50X MAX",	NULL,	IDE_CD_FLAG_FULL_CAPS_PAGE  },
-	{ "WPI CDS-32X",		NULL,	IDE_CD_FLAG_FULL_CAPS_PAGE  },
+	{ "ATAPI CD ROM DRIVE 50X MAX",	NULL,	IDE_AFLAG_FULL_CAPS_PAGE     },
+	{ "WPI CDS-32X",		NULL,	IDE_AFLAG_FULL_CAPS_PAGE     },
 	/* ACER/AOpen 24X CD-ROM has the speed fields byte-swapped. */
-	{ "",			     "241N", IDE_CD_FLAG_LE_SPEED_FIELDS    },
+	{ "",			     "241N", IDE_AFLAG_LE_SPEED_FIELDS       },
 	/*
 	 * Some drives used by Apple don't advertise audio play
 	 * but they do support reading TOC & audio datas.
 	 */
-	{ "MATSHITADVD-ROM SR-8187", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK	    },
-	{ "MATSHITADVD-ROM SR-8186", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK	    },
-	{ "MATSHITADVD-ROM SR-8176", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK	    },
-	{ "MATSHITADVD-ROM SR-8174", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK	    },
-	{ "Optiarc DVD RW AD-5200A", NULL,   IDE_CD_FLAG_PLAY_AUDIO_OK      },
+	{ "MATSHITADVD-ROM SR-8187", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
+	{ "MATSHITADVD-ROM SR-8186", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
+	{ "MATSHITADVD-ROM SR-8176", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
+	{ "MATSHITADVD-ROM SR-8174", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
+	{ "Optiarc DVD RW AD-5200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ NULL, NULL, 0 }
 };
 
@@ -1873,20 +1869,20 @@ static int ide_cdrom_setup(ide_drive_t *drive)
 
 	drive->special.all	= 0;
 
-	cd->cd_flags = IDE_CD_FLAG_MEDIA_CHANGED | IDE_CD_FLAG_NO_EJECT |
+	drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
 		       ide_cd_flags(id);
 
 	if ((id->config & 0x0060) == 0x20)
-		cd->cd_flags |= IDE_CD_FLAG_DRQ_INTERRUPT;
+		drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
 
-	if ((cd->cd_flags & IDE_CD_FLAG_VERTOS_300_SSD) &&
+	if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
 	    id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
-		cd->cd_flags |= (IDE_CD_FLAG_TOCTRACKS_AS_BCD |
-				 IDE_CD_FLAG_TOCADDR_AS_BCD);
-	else if ((cd->cd_flags & IDE_CD_FLAG_VERTOS_600_ESD) &&
+		drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
+				     IDE_AFLAG_TOCADDR_AS_BCD);
+	else if ((drive->atapi_flags & IDE_AFLAG_VERTOS_600_ESD) &&
 		 id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
-		cd->cd_flags |= IDE_CD_FLAG_TOCTRACKS_AS_BCD;
-	else if (cd->cd_flags & IDE_CD_FLAG_SANYO_3CD)
+		drive->atapi_flags |= IDE_AFLAG_TOCTRACKS_AS_BCD;
+	else if (drive->atapi_flags & IDE_AFLAG_SANYO_3CD)
 		/* 3 => use CD in slot 0 */
 		cdi->sanyo_slot = 3;
 
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index fe0ea36e412..61a4599b77d 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -27,42 +27,6 @@
 #define ATAPI_CAPABILITIES_PAGE_SIZE		(8 + 20)
 #define ATAPI_CAPABILITIES_PAGE_PAD_SIZE	4
 
-enum {
-	/* Device sends an interrupt when ready for a packet command. */
-	IDE_CD_FLAG_DRQ_INTERRUPT	= (1 << 0),
-	/* Drive cannot lock the door. */
-	IDE_CD_FLAG_NO_DOORLOCK		= (1 << 1),
-	/* Drive cannot eject the disc. */
-	IDE_CD_FLAG_NO_EJECT		= (1 << 2),
-	/* Drive is a pre ATAPI 1.2 drive. */
-	IDE_CD_FLAG_PRE_ATAPI12		= (1 << 3),
-	/* TOC addresses are in BCD. */
-	IDE_CD_FLAG_TOCADDR_AS_BCD	= (1 << 4),
-	/* TOC track numbers are in BCD. */
-	IDE_CD_FLAG_TOCTRACKS_AS_BCD	= (1 << 5),
-	/*
-	 * Drive does not provide data in multiples of SECTOR_SIZE
-	 * when more than one interrupt is needed.
-	 */
-	IDE_CD_FLAG_LIMIT_NFRAMES	= (1 << 6),
-	/* Seeking in progress. */
-	IDE_CD_FLAG_SEEKING		= (1 << 7),
-	/* Driver has noticed a media change. */
-	IDE_CD_FLAG_MEDIA_CHANGED	= (1 << 8),
-	/* Saved TOC information is current. */
-	IDE_CD_FLAG_TOC_VALID		= (1 << 9),
-	/* We think that the drive door is locked. */
-	IDE_CD_FLAG_DOOR_LOCKED		= (1 << 10),
-	/* SET_CD_SPEED command is unsupported. */
-	IDE_CD_FLAG_NO_SPEED_SELECT	= (1 << 11),
-	IDE_CD_FLAG_VERTOS_300_SSD	= (1 << 12),
-	IDE_CD_FLAG_VERTOS_600_ESD	= (1 << 13),
-	IDE_CD_FLAG_SANYO_3CD		= (1 << 14),
-	IDE_CD_FLAG_FULL_CAPS_PAGE	= (1 << 15),
-	IDE_CD_FLAG_PLAY_AUDIO_OK	= (1 << 16),
-	IDE_CD_FLAG_LE_SPEED_FIELDS	= (1 << 17),
-};
-
 /* Structure of a MSF cdrom address. */
 struct atapi_msf {
 	byte reserved;
@@ -128,8 +92,6 @@ struct cdrom_info {
 	unsigned long last_block;
 	unsigned long start_seek;
 
-	unsigned int cd_flags;
-
 	u8 max_speed;		/* Max speed of the drive. */
 	u8 current_speed;	/* Current speed of the drive. */
 
diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c
index 24d002addf7..085442a4741 100644
--- a/drivers/ide/ide-cd_ioctl.c
+++ b/drivers/ide/ide-cd_ioctl.c
@@ -27,10 +27,9 @@ int ide_cdrom_open_real(struct cdrom_device_info *cdi, int purpose)
 void ide_cdrom_release_real(struct cdrom_device_info *cdi)
 {
 	ide_drive_t *drive = cdi->handle;
-	struct cdrom_info *cd = drive->driver_data;
 
 	if (!cdi->use_count)
-		cd->cd_flags &= ~IDE_CD_FLAG_TOC_VALID;
+		drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
 }
 
 /*
@@ -83,13 +82,12 @@ int ide_cdrom_check_media_change_real(struct cdrom_device_info *cdi,
 				       int slot_nr)
 {
 	ide_drive_t *drive = cdi->handle;
-	struct cdrom_info *cd = drive->driver_data;
 	int retval;
 
 	if (slot_nr == CDSL_CURRENT) {
 		(void) cdrom_check_status(drive, NULL);
-		retval = (cd->cd_flags & IDE_CD_FLAG_MEDIA_CHANGED) ? 1 : 0;
-		cd->cd_flags &= ~IDE_CD_FLAG_MEDIA_CHANGED;
+		retval = (drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED) ? 1 : 0;
+		drive->atapi_flags &= ~IDE_AFLAG_MEDIA_CHANGED;
 		return retval;
 	} else {
 		return -EINVAL;
@@ -107,11 +105,11 @@ int cdrom_eject(ide_drive_t *drive, int ejectflag,
 	char loej = 0x02;
 	unsigned char cmd[BLK_MAX_CDB];
 
-	if ((cd->cd_flags & IDE_CD_FLAG_NO_EJECT) && !ejectflag)
+	if ((drive->atapi_flags & IDE_AFLAG_NO_EJECT) && !ejectflag)
 		return -EDRIVE_CANT_DO_THIS;
 
 	/* reload fails on some drives, if the tray is locked */
-	if ((cd->cd_flags & IDE_CD_FLAG_DOOR_LOCKED) && ejectflag)
+	if ((drive->atapi_flags & IDE_AFLAG_DOOR_LOCKED) && ejectflag)
 		return 0;
 
 	/* only tell drive to close tray if open, if it can do that */
@@ -131,7 +129,6 @@ static
 int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
 		    struct request_sense *sense)
 {
-	struct cdrom_info *cd = drive->driver_data;
 	struct request_sense my_sense;
 	int stat;
 
@@ -139,7 +136,7 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
 		sense = &my_sense;
 
 	/* If the drive cannot lock the door, just pretend. */
-	if (cd->cd_flags & IDE_CD_FLAG_NO_DOORLOCK) {
+	if (drive->atapi_flags & IDE_AFLAG_NO_DOORLOCK) {
 		stat = 0;
 	} else {
 		unsigned char cmd[BLK_MAX_CDB];
@@ -160,7 +157,7 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
 	    (sense->asc == 0x24 || sense->asc == 0x20)) {
 		printk(KERN_ERR "%s: door locking not supported\n",
 			drive->name);
-		cd->cd_flags |= IDE_CD_FLAG_NO_DOORLOCK;
+		drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
 		stat = 0;
 	}
 
@@ -170,9 +167,9 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
 
 	if (stat == 0) {
 		if (lockflag)
-			cd->cd_flags |= IDE_CD_FLAG_DOOR_LOCKED;
+			drive->atapi_flags |= IDE_AFLAG_DOOR_LOCKED;
 		else
-			cd->cd_flags &= ~IDE_CD_FLAG_DOOR_LOCKED;
+			drive->atapi_flags &= ~IDE_AFLAG_DOOR_LOCKED;
 	}
 
 	return stat;
@@ -250,7 +247,7 @@ int ide_cdrom_get_last_session(struct cdrom_device_info *cdi,
 	struct request_sense sense;
 	int ret;
 
-	if ((info->cd_flags & IDE_CD_FLAG_TOC_VALID) == 0 || !info->toc) {
+	if ((drive->atapi_flags & IDE_AFLAG_TOC_VALID) == 0 || !info->toc) {
 		ret = ide_cd_read_toc(drive, &sense);
 		if (ret)
 			return ret;
@@ -308,7 +305,7 @@ int ide_cdrom_reset(struct cdrom_device_info *cdi)
 	 * A reset will unlock the door. If it was previously locked,
 	 * lock it again.
 	 */
-	if (cd->cd_flags & IDE_CD_FLAG_DOOR_LOCKED)
+	if (drive->atapi_flags & IDE_AFLAG_DOOR_LOCKED)
 		(void)ide_cd_lockdoor(drive, 1, &sense);
 
 	return ret;
@@ -324,7 +321,7 @@ static int ide_cd_get_toc_entry(ide_drive_t *drive, int track,
 	/*
 	 * don't serve cached data, if the toc isn't valid
 	 */
-	if ((info->cd_flags & IDE_CD_FLAG_TOC_VALID) == 0)
+	if ((drive->atapi_flags & IDE_AFLAG_TOC_VALID) == 0)
 		return -EINVAL;
 
 	/* Check validity of requested track number. */
-- 
cgit v1.2.3


From 141d3b27fc4b4f97ca6d9b5c1cc8aeeab967dcfc Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Wed, 23 Jul 2008 19:56:02 +0200
Subject: ide: ide-cd.c fix sparse endianness warnings

drivers/ide/ide-cd.c:1276:46: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd.c:1298:19: warning: cast to restricted __be32
drivers/ide/ide-cd.c:1300:4: warning: cast to restricted __be32
drivers/ide/ide-cd.c:1522:14: warning: cast to restricted __le16
drivers/ide/ide-cd.c:1523:14: warning: cast to restricted __le16
drivers/ide/ide-cd.c:1525:14: warning: cast to restricted __be16
drivers/ide/ide-cd.c:1526:14: warning: cast to restricted __be16
drivers/ide/ide-cd.c:1667:37: warning: cast to restricted __be16

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 52fe3b95dc9..4e73aeee405 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1284,7 +1284,7 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
 	 */
 	cmd[7] = cdi->sanyo_slot % 3;
 
-	return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, sense, 0, REQ_QUIET);
+	return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, sense, 0, REQ_QUIET);
 }
 
 static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
@@ -1292,8 +1292,8 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 			       struct request_sense *sense)
 {
 	struct {
-		__u32 lba;
-		__u32 blocklen;
+		__be32 lba;
+		__be32 blocklen;
 	} capbuf;
 
 	int stat;
@@ -1526,15 +1526,12 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
 	struct cdrom_info *cd = drive->driver_data;
 	u16 curspeed, maxspeed;
 
-	curspeed = *(u16 *)&buf[8 + 14];
-	maxspeed = *(u16 *)&buf[8 +  8];
-
 	if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) {
-		curspeed = le16_to_cpu(curspeed);
-		maxspeed = le16_to_cpu(maxspeed);
+		curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]);
+		maxspeed = le16_to_cpup((__le16 *)&buf[8 + 8]);
 	} else {
-		curspeed = be16_to_cpu(curspeed);
-		maxspeed = be16_to_cpu(maxspeed);
+		curspeed = be16_to_cpup((__be16 *)&buf[8 + 14]);
+		maxspeed = be16_to_cpup((__be16 *)&buf[8 + 8]);
 	}
 
 	cd->current_speed = (curspeed + (176/2)) / 176;
@@ -1675,7 +1672,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
 	else
 		printk(KERN_CONT " drive");
 
-	printk(KERN_CONT ", %dkB Cache\n", be16_to_cpu(*(u16 *)&buf[8 + 12]));
+	printk(KERN_CONT ", %dkB Cache\n", be16_to_cpup((__be16 *)&buf[8 + 12]));
 
 	return nslots;
 }
-- 
cgit v1.2.3


From 1a677aba5e0e45cc5b2a04c059edfcf06c1ea9bb Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Wed, 23 Jul 2008 19:56:02 +0200
Subject: ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings

The function ide_cd_queue_pc should be checked as the bufflen arg is
dereferenced and lots of callers are passing in NULL.

drivers/ide/ide-cd_ioctl.c:124:46: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd_ioctl.c:149:47: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd_ioctl.c:231:46: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd_ioctl.c:374:46: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd_ioctl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c
index 085442a4741..74231b41f61 100644
--- a/drivers/ide/ide-cd_ioctl.c
+++ b/drivers/ide/ide-cd_ioctl.c
@@ -121,7 +121,7 @@ int cdrom_eject(ide_drive_t *drive, int ejectflag,
 	cmd[0] = GPCMD_START_STOP_UNIT;
 	cmd[4] = loej | (ejectflag != 0);
 
-	return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, sense, 0, 0);
+	return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, sense, 0, 0);
 }
 
 /* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */
@@ -146,7 +146,7 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
 		cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
 		cmd[4] = lockflag ? 1 : 0;
 
-		stat = ide_cd_queue_pc(drive, cmd, 0, NULL, 0,
+		stat = ide_cd_queue_pc(drive, cmd, 0, NULL, NULL,
 				       sense, 0, 0);
 	}
 
@@ -228,7 +228,7 @@ int ide_cdrom_select_speed(struct cdrom_device_info *cdi, int speed)
 		cmd[5] = speed & 0xff;
 	}
 
-	stat = ide_cd_queue_pc(drive, cmd, 0, NULL, 0, &sense, 0, 0);
+	stat = ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, &sense, 0, 0);
 
 	if (!ide_cdrom_get_capabilities(drive, buf)) {
 		ide_cdrom_update_speed(drive, buf);
@@ -371,7 +371,7 @@ static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg)
 	lba_to_msf(lba_start,   &cmd[3], &cmd[4], &cmd[5]);
 	lba_to_msf(lba_end - 1, &cmd[6], &cmd[7], &cmd[8]);
 
-	return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, &sense, 0, 0);
+	return ide_cd_queue_pc(drive, cmd, 0, NULL, NULL, &sense, 0, 0);
 }
 
 static int ide_cd_read_tochdr(ide_drive_t *drive, void *arg)
-- 
cgit v1.2.3


From fc410698ebf7abfb64f0e2337b871298557f0575 Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@suse.cz>
Date: Wed, 23 Jul 2008 19:56:02 +0200
Subject: ide: small whitespace fixes

Small whitespace fixes for drivers/ide.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 2 +-
 drivers/ide/ide.c       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 0ead4537fc6..4aa76c45375 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -638,7 +638,7 @@ static inline u8 probe_for_drive (ide_drive_t *drive)
 	return drive->present;
 }
 
-static void hwif_release_dev (struct device *dev)
+static void hwif_release_dev(struct device *dev)
 {
 	ide_hwif_t *hwif = container_of(dev, ide_hwif_t, gendev);
 
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 914942a766d..60f0ca66aa9 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1,6 +1,6 @@
 /*
  *  Copyright (C) 1994-1998	    Linus Torvalds & authors (see below)
- *  Copyrifht (C) 2003-2005, 2007   Bartlomiej Zolnierkiewicz
+ *  Copyright (C) 2003-2005, 2007   Bartlomiej Zolnierkiewicz
  */
 
 /*
-- 
cgit v1.2.3


From 09e50d55a9490e9b7a6fdfbf8fc078924b25ecb5 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 23 Jul 2008 10:11:19 -0400
Subject: lockdep: annotate cifs in-kernel sockets

Put CIFS sockets in their own class to avoid some lockdep warnings. CIFS
sockets are not exposed to user-space, and so are not subject to the
same deadlock scenarios.

A similar change was made a couple of years ago for RPC sockets in commit
ed07536ed6731775219c1df7fa26a7588753e693.

This patch should prevent lockdep false-positives like this one:

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.18-98.el5.jtltest.38.bz456320.1debug #1
-------------------------------------------------------
test5/2483 is trying to acquire lock:
 (sk_lock-AF_INET){--..}, at: [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f

but task is already holding lock:
 (&inode->i_alloc_sem){--..}, at: [<ffffffff8002e454>] notify_change+0xf5/0x2e0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&inode->i_alloc_sem){--..}:
       [<ffffffff800a817c>] __lock_acquire+0x9a9/0xadf
       [<ffffffff800a8a72>] lock_acquire+0x55/0x70
       [<ffffffff8002e454>] notify_change+0xf5/0x2e0
       [<ffffffff800a4e36>] down_write+0x3c/0x68
       [<ffffffff8002e454>] notify_change+0xf5/0x2e0
       [<ffffffff800e358d>] do_truncate+0x50/0x6b
       [<ffffffff8005197c>] get_write_access+0x40/0x46
       [<ffffffff80012cf1>] may_open+0x1d3/0x22e
       [<ffffffff8001bc81>] open_namei+0x2c6/0x6dd
       [<ffffffff800289c6>] do_filp_open+0x1c/0x38
       [<ffffffff800683ef>] _spin_unlock+0x17/0x20
       [<ffffffff800167a7>] get_unused_fd+0xf9/0x107
       [<ffffffff8001a704>] do_sys_open+0x44/0xbe
       [<ffffffff80060116>] system_call+0x7e/0x83
       [<ffffffffffffffff>] 0xffffffffffffffff

-> #2 (&sysfs_inode_imutex_key){--..}:
       [<ffffffff800a817c>] __lock_acquire+0x9a9/0xadf
       [<ffffffff8010f6df>] create_dir+0x26/0x1d7
       [<ffffffff800a8a72>] lock_acquire+0x55/0x70
       [<ffffffff8010f6df>] create_dir+0x26/0x1d7
       [<ffffffff800671c0>] mutex_lock_nested+0x104/0x29c
       [<ffffffff800a819d>] __lock_acquire+0x9ca/0xadf
       [<ffffffff8010f6df>] create_dir+0x26/0x1d7
       [<ffffffff8010fc67>] sysfs_create_dir+0x58/0x76
       [<ffffffff8015144c>] kobject_add+0xdb/0x198
       [<ffffffff801be765>] class_device_add+0xb2/0x465
       [<ffffffff8005a6ff>] kobject_get+0x12/0x17
       [<ffffffff80225265>] register_netdevice+0x270/0x33e
       [<ffffffff8022538c>] register_netdev+0x59/0x67
       [<ffffffff80464d40>] net_olddevs_init+0xb/0xac
       [<ffffffff80448a79>] init+0x1f9/0x2fc
       [<ffffffff80068885>] _spin_unlock_irq+0x24/0x27
       [<ffffffff80067f86>] trace_hardirqs_on_thunk+0x35/0x37
       [<ffffffff80061079>] child_rip+0xa/0x11
       [<ffffffff80068885>] _spin_unlock_irq+0x24/0x27
       [<ffffffff800606a8>] restore_args+0x0/0x30
       [<ffffffff80179a59>] acpi_ds_init_one_object+0x0/0x80
       [<ffffffff80448880>] init+0x0/0x2fc
       [<ffffffff8006106f>] child_rip+0x0/0x11
       [<ffffffffffffffff>] 0xffffffffffffffff

-> #1 (rtnl_mutex){--..}:
       [<ffffffff800a817c>] __lock_acquire+0x9a9/0xadf
       [<ffffffff8025acf8>] ip_mc_leave_group+0x23/0xb7
       [<ffffffff800a8a72>] lock_acquire+0x55/0x70
       [<ffffffff8025acf8>] ip_mc_leave_group+0x23/0xb7
       [<ffffffff800671c0>] mutex_lock_nested+0x104/0x29c
       [<ffffffff8025acf8>] ip_mc_leave_group+0x23/0xb7
       [<ffffffff802451b0>] do_ip_setsockopt+0x6d1/0x9bf
       [<ffffffff800a575e>] lock_release_holdtime+0x27/0x48
       [<ffffffff800a575e>] lock_release_holdtime+0x27/0x48
       [<ffffffff8006a85e>] do_page_fault+0x503/0x835
       [<ffffffff8012cbf6>] socket_has_perm+0x5b/0x68
       [<ffffffff80245556>] ip_setsockopt+0x22/0x78
       [<ffffffff8021c973>] sys_setsockopt+0x91/0xb7
       [<ffffffff800602a6>] tracesys+0xd5/0xdf
       [<ffffffffffffffff>] 0xffffffffffffffff

-> #0 (sk_lock-AF_INET){--..}:
       [<ffffffff800a5037>] print_stack_trace+0x59/0x68
       [<ffffffff800a8092>] __lock_acquire+0x8bf/0xadf
       [<ffffffff800a8a72>] lock_acquire+0x55/0x70
       [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f
       [<ffffffff80035466>] lock_sock+0xd4/0xe4
       [<ffffffff80096e91>] _local_bh_enable+0xcb/0xe0
       [<ffffffff800606a8>] restore_args+0x0/0x30
       [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f
       [<ffffffff80057540>] sock_sendmsg+0xf3/0x110
       [<ffffffff800a2bb6>] autoremove_wake_function+0x0/0x2e
       [<ffffffff800a10e4>] kernel_text_address+0x1a/0x26
       [<ffffffff8006f4e2>] dump_trace+0x211/0x23a
       [<ffffffff800a6d3d>] find_usage_backwards+0x5f/0x88
       [<ffffffff8840221a>] MD5Final+0xaf/0xc2 [cifs]
       [<ffffffff884032ec>] cifs_calculate_signature+0x55/0x69 [cifs]
       [<ffffffff8021d891>] kernel_sendmsg+0x35/0x47
       [<ffffffff883ff38e>] smb_send+0xa3/0x151 [cifs]
       [<ffffffff883ff5de>] SendReceive+0x1a2/0x448 [cifs]
       [<ffffffff800a812f>] __lock_acquire+0x95c/0xadf
       [<ffffffff883e758a>] CIFSSMBSetEOF+0x20d/0x25b [cifs]
       [<ffffffff883fa430>] cifs_set_file_size+0x110/0x3b7 [cifs]
       [<ffffffff883faa89>] cifs_setattr+0x3b2/0x6f6 [cifs]
       [<ffffffff8002e454>] notify_change+0xf5/0x2e0
       [<ffffffff8002e4a4>] notify_change+0x145/0x2e0
       [<ffffffff800e358d>] do_truncate+0x50/0x6b
       [<ffffffff8005197c>] get_write_access+0x40/0x46
       [<ffffffff80012cf1>] may_open+0x1d3/0x22e
       [<ffffffff8001bc81>] open_namei+0x2c6/0x6dd
       [<ffffffff800289c6>] do_filp_open+0x1c/0x38
       [<ffffffff800683ef>] _spin_unlock+0x17/0x20
       [<ffffffff800167a7>] get_unused_fd+0xf9/0x107
       [<ffffffff8001a704>] do_sys_open+0x44/0xbe
       [<ffffffff800602a6>] tracesys+0xd5/0xdf
       [<ffffffffffffffff>] 0xffffffffffffffff

other info that might help us debug this:

2 locks held by test5/2483:
 #0:  (&inode->i_mutex){--..}, at: [<ffffffff800e3582>] do_truncate+0x45/0x6b
 #1:  (&inode->i_alloc_sem){--..}, at: [<ffffffff8002e454>] notify_change+0xf5/0x2e0

stack backtrace:

Call Trace:
 [<ffffffff800a6a7b>] print_circular_bug_tail+0x65/0x6e
 [<ffffffff800a5037>] print_stack_trace+0x59/0x68
 [<ffffffff800a8092>] __lock_acquire+0x8bf/0xadf
 [<ffffffff800a8a72>] lock_acquire+0x55/0x70
 [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f
 [<ffffffff80035466>] lock_sock+0xd4/0xe4
 [<ffffffff80096e91>] _local_bh_enable+0xcb/0xe0
 [<ffffffff800606a8>] restore_args+0x0/0x30
 [<ffffffff800270d2>] tcp_sendmsg+0x1c/0xb2f
 [<ffffffff80057540>] sock_sendmsg+0xf3/0x110
 [<ffffffff800a2bb6>] autoremove_wake_function+0x0/0x2e
 [<ffffffff800a10e4>] kernel_text_address+0x1a/0x26
 [<ffffffff8006f4e2>] dump_trace+0x211/0x23a
 [<ffffffff800a6d3d>] find_usage_backwards+0x5f/0x88
 [<ffffffff8840221a>] :cifs:MD5Final+0xaf/0xc2
 [<ffffffff884032ec>] :cifs:cifs_calculate_signature+0x55/0x69
 [<ffffffff8021d891>] kernel_sendmsg+0x35/0x47
 [<ffffffff883ff38e>] :cifs:smb_send+0xa3/0x151
 [<ffffffff883ff5de>] :cifs:SendReceive+0x1a2/0x448
 [<ffffffff800a812f>] __lock_acquire+0x95c/0xadf
 [<ffffffff883e758a>] :cifs:CIFSSMBSetEOF+0x20d/0x25b
 [<ffffffff883fa430>] :cifs:cifs_set_file_size+0x110/0x3b7
 [<ffffffff883faa89>] :cifs:cifs_setattr+0x3b2/0x6f6
 [<ffffffff8002e454>] notify_change+0xf5/0x2e0
 [<ffffffff8002e4a4>] notify_change+0x145/0x2e0
 [<ffffffff800e358d>] do_truncate+0x50/0x6b
 [<ffffffff8005197c>] get_write_access+0x40/0x46
 [<ffffffff80012cf1>] may_open+0x1d3/0x22e
 [<ffffffff8001bc81>] open_namei+0x2c6/0x6dd
 [<ffffffff800289c6>] do_filp_open+0x1c/0x38
 [<ffffffff800683ef>] _spin_unlock+0x17/0x20
 [<ffffffff800167a7>] get_unused_fd+0xf9/0x107
 [<ffffffff8001a704>] do_sys_open+0x44/0xbe
 [<ffffffff800602a6>] tracesys+0xd5/0xdf

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index e8fa46c7cff..64446272938 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1461,6 +1461,39 @@ get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path,
 	return rc;
 }
 
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key cifs_key[2];
+static struct lock_class_key cifs_slock_key[2];
+
+static inline void
+cifs_reclassify_socket4(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+	BUG_ON(sock_owned_by_user(sk));
+	sock_lock_init_class_and_name(sk, "slock-AF_INET-CIFS",
+		&cifs_slock_key[0], "sk_lock-AF_INET-CIFS", &cifs_key[0]);
+}
+
+static inline void
+cifs_reclassify_socket6(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+	BUG_ON(sock_owned_by_user(sk));
+	sock_lock_init_class_and_name(sk, "slock-AF_INET6-CIFS",
+		&cifs_slock_key[1], "sk_lock-AF_INET6-CIFS", &cifs_key[1]);
+}
+#else
+static inline void
+cifs_reclassify_socket4(struct socket *sock)
+{
+}
+
+static inline void
+cifs_reclassify_socket6(struct socket *sock)
+{
+}
+#endif
+
 /* See RFC1001 section 14 on representation of Netbios names */
 static void rfc1002mangle(char *target, char *source, unsigned int length)
 {
@@ -1495,6 +1528,7 @@ ipv4_connect(struct sockaddr_in *psin_server, struct socket **csocket,
 		/* BB other socket options to set KEEPALIVE, NODELAY? */
 			cFYI(1, ("Socket created"));
 			(*csocket)->sk->sk_allocation = GFP_NOFS;
+			cifs_reclassify_socket4(*csocket);
 		}
 	}
 
@@ -1627,6 +1661,7 @@ ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket)
 		/* BB other socket options to set KEEPALIVE, NODELAY? */
 			 cFYI(1, ("ipv6 Socket created"));
 			(*csocket)->sk->sk_allocation = GFP_NOFS;
+			cifs_reclassify_socket6(*csocket);
 		}
 	}
 
-- 
cgit v1.2.3


From 5b3ab1dbd401b36ba2f9bfee2d2dae252fd62cd8 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 23 Jul 2008 14:01:29 -0700
Subject: netdev: Remove warning from __netif_schedule().

It isn't helping anything and we aren't going to be able to change all
the drivers that do queue wakeups in strange situations.

Just letting a noop_qdisc get scheduled will work because when
qdisc_run() executes via net_tx_work() it will simply find no packets
pending when it makes the ->dequeue() call in qdisc_restart.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 6bf217da9d8..ccf97f9f37e 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1341,9 +1341,6 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 
 void __netif_schedule(struct Qdisc *q)
 {
-	if (WARN_ON_ONCE(q == &noop_qdisc))
-		return;
-
 	if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state)) {
 		struct softnet_data *sd;
 		unsigned long flags;
-- 
cgit v1.2.3


From b4942af65028c5eb516fdd9053020ccb2ee186ce Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <oliver@hartkopp.net>
Date: Wed, 23 Jul 2008 14:06:04 -0700
Subject: net: Update entry in af_family_clock_key_strings

In the merge phase of the CAN subsystem the
af_family_clock_key_strings[] have been added to sock.c in commit
443aef0eddfa44c158d1b94ebb431a70638fcab4
(lockdep: fixup sk_callback_lock annotation). This trivial patch adds
the missing name for address family 29 (AF_CAN).

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/sock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/sock.c b/net/core/sock.c
index 10a64d57078..91f8bbc9352 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -180,7 +180,7 @@ static const char *af_family_clock_key_strings[AF_MAX+1] = {
   "clock-AF_ASH"   , "clock-AF_ECONET"   , "clock-AF_ATMSVC"   ,
   "clock-21"       , "clock-AF_SNA"      , "clock-AF_IRDA"     ,
   "clock-AF_PPPOX" , "clock-AF_WANPIPE"  , "clock-AF_LLC"      ,
-  "clock-27"       , "clock-28"          , "clock-29"          ,
+  "clock-27"       , "clock-28"          , "clock-AF_CAN"      ,
   "clock-AF_TIPC"  , "clock-AF_BLUETOOTH", "clock-AF_IUCV"     ,
   "clock-AF_RXRPC" , "clock-AF_MAX"
 };
-- 
cgit v1.2.3


From 1fa6d8181b7bb0361512170c30e436dcc95591ee Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Wed, 23 Jul 2008 14:20:12 -0700
Subject: MAINTAINERS: Remove Glenn Streiff from NetEffect entry

Glenn is no longer at NetEffect.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 MAINTAINERS | 2 --
 1 file changed, 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 11944b44c2f..2a73da0cd07 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2915,8 +2915,6 @@ P:	Faisal Latif
 M:	flatif@neteffect.com
 P:	Chien Tung
 M:	ctung@neteffect.com
-P:	Glenn Streiff
-M:	gstreiff@neteffect.com
 L:	general@lists.openfabrics.org
 W:	http://www.neteffect.com
 S:	Supported
-- 
cgit v1.2.3


From 8efdbde647f542ce0d303273df7ad4157caa03d0 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 23 Jul 2008 21:28:12 +0000
Subject: [CIFS] break ATTR_SIZE changes out into their own function

Move the code that handles ATTR_SIZE changes to its own function. This
makes for a smaller function and reduces the level of indentation.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/inode.c | 151 +++++++++++++++++++++++++++++---------------------------
 1 file changed, 78 insertions(+), 73 deletions(-)

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 2e904bd111c..46e54d39461 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1413,6 +1413,82 @@ out_busy:
 	return -ETXTBSY;
 }
 
+static int
+cifs_set_file_size(struct inode *inode, struct iattr *attrs,
+		   int xid, char *full_path)
+{
+	int rc;
+	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *pTcon = cifs_sb->tcon;
+
+	/*
+	 * To avoid spurious oplock breaks from server, in the case of
+	 * inodes that we already have open, avoid doing path based
+	 * setting of file size if we can do it by handle.
+	 * This keeps our caching token (oplock) and avoids timeouts
+	 * when the local oplock break takes longer to flush
+	 * writebehind data than the SMB timeout for the SetPathInfo
+	 * request would allow
+	 */
+	open_file = find_writable_file(cifsInode);
+	if (open_file) {
+		__u16 nfid = open_file->netfid;
+		__u32 npid = open_file->pid;
+		rc = CIFSSMBSetFileSize(xid, pTcon, attrs->ia_size, nfid,
+					npid, false);
+		atomic_dec(&open_file->wrtPending);
+		cFYI(1, ("SetFSize for attrs rc = %d", rc));
+		if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
+			unsigned int bytes_written;
+			rc = CIFSSMBWrite(xid, pTcon, nfid, 0, attrs->ia_size,
+					  &bytes_written, NULL, NULL, 1);
+			cFYI(1, ("Wrt seteof rc %d", rc));
+		}
+	} else
+		rc = -EINVAL;
+
+	if (rc != 0) {
+		/* Set file size by pathname rather than by handle
+		   either because no valid, writeable file handle for
+		   it was found or because there was an error setting
+		   it by handle */
+		rc = CIFSSMBSetEOF(xid, pTcon, full_path, attrs->ia_size,
+				   false, cifs_sb->local_nls,
+				   cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+		cFYI(1, ("SetEOF by path (setattrs) rc = %d", rc));
+		if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
+			__u16 netfid;
+			int oplock = 0;
+
+			rc = SMBLegacyOpen(xid, pTcon, full_path,
+				FILE_OPEN, GENERIC_WRITE,
+				CREATE_NOT_DIR, &netfid, &oplock, NULL,
+				cifs_sb->local_nls,
+				cifs_sb->mnt_cifs_flags &
+					CIFS_MOUNT_MAP_SPECIAL_CHR);
+			if (rc == 0) {
+				unsigned int bytes_written;
+				rc = CIFSSMBWrite(xid, pTcon, netfid, 0,
+						  attrs->ia_size,
+						  &bytes_written, NULL,
+						  NULL, 1);
+				cFYI(1, ("wrt seteof rc %d", rc));
+				CIFSSMBClose(xid, pTcon, netfid);
+			}
+		}
+	}
+
+	if (rc == 0) {
+		rc = cifs_vmtruncate(inode, attrs->ia_size);
+		cifs_truncate_page(inode->i_mapping, inode->i_size);
+	}
+
+	return rc;
+}
+
 int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 {
 	int xid;
@@ -1420,7 +1496,6 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 	struct cifsTconInfo *pTcon;
 	char *full_path = NULL;
 	int rc = -EACCES;
-	struct cifsFileInfo *open_file = NULL;
 	FILE_BASIC_INFO time_buf;
 	bool set_time = false;
 	bool set_dosattr = false;
@@ -1472,78 +1547,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 	}
 
 	if (attrs->ia_valid & ATTR_SIZE) {
-		/* To avoid spurious oplock breaks from server, in the case of
-		   inodes that we already have open, avoid doing path based
-		   setting of file size if we can do it by handle.
-		   This keeps our caching token (oplock) and avoids timeouts
-		   when the local oplock break takes longer to flush
-		   writebehind data than the SMB timeout for the SetPathInfo
-		   request would allow */
-
-		open_file = find_writable_file(cifsInode);
-		if (open_file) {
-			__u16 nfid = open_file->netfid;
-			__u32 npid = open_file->pid;
-			rc = CIFSSMBSetFileSize(xid, pTcon, attrs->ia_size,
-						nfid, npid, false);
-			atomic_dec(&open_file->wrtPending);
-			cFYI(1, ("SetFSize for attrs rc = %d", rc));
-			if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
-				unsigned int bytes_written;
-				rc = CIFSSMBWrite(xid, pTcon,
-						  nfid, 0, attrs->ia_size,
-						  &bytes_written, NULL, NULL,
-						  1 /* 45 seconds */);
-				cFYI(1, ("Wrt seteof rc %d", rc));
-			}
-		} else
-			rc = -EINVAL;
-
-		if (rc != 0) {
-			/* Set file size by pathname rather than by handle
-			   either because no valid, writeable file handle for
-			   it was found or because there was an error setting
-			   it by handle */
-			rc = CIFSSMBSetEOF(xid, pTcon, full_path,
-					   attrs->ia_size, false,
-					   cifs_sb->local_nls,
-					   cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-			cFYI(1, ("SetEOF by path (setattrs) rc = %d", rc));
-			if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) {
-				__u16 netfid;
-				int oplock = 0;
-
-				rc = SMBLegacyOpen(xid, pTcon, full_path,
-					FILE_OPEN, GENERIC_WRITE,
-					CREATE_NOT_DIR, &netfid, &oplock,
-					NULL, cifs_sb->local_nls,
-					cifs_sb->mnt_cifs_flags &
-						CIFS_MOUNT_MAP_SPECIAL_CHR);
-				if (rc == 0) {
-					unsigned int bytes_written;
-					rc = CIFSSMBWrite(xid, pTcon,
-							netfid, 0,
-							attrs->ia_size,
-							&bytes_written, NULL,
-							NULL, 1 /* 45 sec */);
-					cFYI(1, ("wrt seteof rc %d", rc));
-					CIFSSMBClose(xid, pTcon, netfid);
-				}
-
-			}
-		}
-
-		/* Server is ok setting allocation size implicitly - no need
-		   to call:
-		CIFSSMBSetEOF(xid, pTcon, full_path, attrs->ia_size, true,
-			 cifs_sb->local_nls);
-		   */
-
-		if (rc == 0) {
-			rc = cifs_vmtruncate(inode, attrs->ia_size);
-			cifs_truncate_page(inode->i_mapping, inode->i_size);
-		} else
+		rc = cifs_set_file_size(inode, attrs, xid, full_path);
+		if (rc != 0)
 			goto cifs_setattr_exit;
 	}
 
-- 
cgit v1.2.3


From e8ebe3b893792887317bc24cc4608753f81b81d3 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 23 Jul 2008 15:30:52 -0700
Subject: e1000e: fix e1000_netpoll(), remove extraneous e1000_clean_tx_irq()
 call

Evgeniy Polyakov noticed that drivers/net/e1000e/netdev.c:e1000_netpoll()
was calling e1000_clean_tx_irq() without taking the TX lock.

David Miller suggested to remove the call altogether: since in this
callpah there's periodic calls to ->poll() anyway which will do
e1000_clean_tx_irq() and will garbage-collect any finished TX ring
descriptors.

This fix solved the e1000e+netconsole crashes i've been seeing:

=============================================================================
BUG skbuff_head_cache: Poison overwritten
-----------------------------------------------------------------------------

INFO: 0xf658ae9c-0xf658ae9c. First byte 0x6a instead of 0x6b
INFO: Allocated in __alloc_skb+0x2c/0x110 age=0 cpu=0 pid=5098
INFO: Freed in __kfree_skb+0x31/0x80 age=0 cpu=1 pid=4440
INFO: Slab 0xc16cc140 objects=16 used=1 fp=0xf658ae00 flags=0x400000c3
INFO: Object 0xf658ae00 @offset=3584 fp=0xf658af00

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/netdev.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 869544b8c05..9c0f56b3c51 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4067,8 +4067,6 @@ static void e1000_netpoll(struct net_device *netdev)
 	disable_irq(adapter->pdev->irq);
 	e1000_intr(adapter->pdev->irq, netdev);
 
-	e1000_clean_tx_irq(adapter);
-
 	enable_irq(adapter->pdev->irq);
 }
 #endif
-- 
cgit v1.2.3


From 7ae93f51d7fa8b9130d47e0b7d17979a165c5bc3 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 23 Jul 2008 16:21:07 -0700
Subject: sparc64: Fix cpufreq notifier registry.

Based upon a report by Daniel Smolik.

We do it too early, which triggers a BUG in
cpufreq_register_notifier().

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/time.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index bedc4c159b1..a0c6a97eec6 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -884,6 +884,16 @@ static struct notifier_block sparc64_cpufreq_notifier_block = {
 	.notifier_call	= sparc64_cpufreq_notifier
 };
 
+static int __init register_sparc64_cpufreq_notifier(void)
+{
+
+	cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+	return 0;
+}
+
+core_initcall(register_sparc64_cpufreq_notifier);
+
 #endif /* CONFIG_CPU_FREQ */
 
 static int sparc64_next_event(unsigned long delta,
@@ -1050,11 +1060,6 @@ void __init time_init(void)
 	       sparc64_clockevent.mult, sparc64_clockevent.shift);
 
 	setup_sparc64_timer();
-
-#ifdef CONFIG_CPU_FREQ
-	cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-#endif
 }
 
 unsigned long long sched_clock(void)
-- 
cgit v1.2.3


From 1685a03e98b7e9b83e0aa692c1cc470b3aa37597 Mon Sep 17 00:00:00 2001
From: Jan Nikitenko <jan.nikitenko@gmail.com>
Date: Thu, 24 Jul 2008 01:27:07 +0200
Subject: mmc_spi: put signals to low power off fix

The original intention was to write a zero byte to mmc to force spi
signals to low when doing power off. Somehow the spi_w8r8 call got there
so a read followed the write of single zero byte. This patch changes
that to simple write of zero byte without the following read.
This way the power off is more reliable and completely sufficient.

Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/mmc_spi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 41cc63360e4..7503b81374e 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1076,6 +1076,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		 */
 		if (canpower && ios->power_mode == MMC_POWER_OFF) {
 			int mres;
+			u8 nullbyte = 0;
 
 			host->spi->mode &= ~(SPI_CPOL|SPI_CPHA);
 			mres = spi_setup(host->spi);
@@ -1083,7 +1084,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				dev_dbg(&host->spi->dev,
 					"switch to SPI mode 0 failed\n");
 
-			if (spi_w8r8(host->spi, 0x00) < 0)
+			if (spi_write(host->spi, &nullbyte, 1) < 0)
 				dev_dbg(&host->spi->dev,
 					"put spi signals to low failed\n");
 
-- 
cgit v1.2.3


From 4b53fb67e385b856a991d402096379dab462170a Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 23 Jul 2008 16:38:45 -0700
Subject: tcp: Clear probes_out more aggressively in tcp_ack().

This is based upon an excellent bug report from Eric Dumazet.

tcp_ack() should clear ->icsk_probes_out even if there are packets
outstanding.  Otherwise if we get a sequence of ACKs while we do have
packets outstanding over and over again, we'll never clear the
probes_out value and eventually think the connection is too sick and
we'll reset it.

This appears to be some "optimization" added to tcp_ack() in the 2.4.x
timeframe.  In 2.2.x, probes_out is pretty much always cleared by
tcp_ack().

Here is Eric's original report:

----------------------------------------
Apparently, we can in some situations reset TCP connections in a couple of seconds when some frames are lost.

In order to reproduce the problem, please try the following program on linux-2.6.25.*

Setup some iptables rules to allow two frames per second sent on loopback interface to tcp destination port 12000

iptables -N SLOWLO
iptables -A SLOWLO -m hashlimit --hashlimit 2 --hashlimit-burst 1 --hashlimit-mode dstip --hashlimit-name slow2 -j ACCEPT
iptables -A SLOWLO -j DROP

iptables -A OUTPUT -o lo -p tcp --dport 12000 -j SLOWLO

Then run the attached program and see the output :

# ./loop
State      Recv-Q Send-Q                                  Local Address:Port                                    Peer Address:Port
ESTAB      0      40                                          127.0.0.1:54455                                      127.0.0.1:12000  timer:(persist,200ms,1)
State      Recv-Q Send-Q                                  Local Address:Port                                    Peer Address:Port
ESTAB      0      40                                          127.0.0.1:54455                                      127.0.0.1:12000  timer:(persist,200ms,3)
State      Recv-Q Send-Q                                  Local Address:Port                                    Peer Address:Port
ESTAB      0      40                                          127.0.0.1:54455                                      127.0.0.1:12000  timer:(persist,200ms,5)
State      Recv-Q Send-Q                                  Local Address:Port                                    Peer Address:Port
ESTAB      0      40                                          127.0.0.1:54455                                      127.0.0.1:12000  timer:(persist,200ms,7)
State      Recv-Q Send-Q                                  Local Address:Port                                    Peer Address:Port
ESTAB      0      40                                          127.0.0.1:54455                                      127.0.0.1:12000  timer:(persist,200ms,9)
State      Recv-Q Send-Q                                  Local Address:Port                                    Peer Address:Port
ESTAB      0      40                                          127.0.0.1:54455                                      127.0.0.1:12000  timer:(persist,200ms,11)
State      Recv-Q Send-Q                                  Local Address:Port                                    Peer Address:Port
ESTAB      0      40                                          127.0.0.1:54455                                      127.0.0.1:12000  timer:(persist,201ms,13)
State      Recv-Q Send-Q                                  Local Address:Port                                    Peer Address:Port
ESTAB      0      40                                          127.0.0.1:54455                                      127.0.0.1:12000  timer:(persist,188ms,15)
write(): Connection timed out
wrote 890 bytes but was interrupted after 9 seconds
ESTAB      0      0                 127.0.0.1:12000            127.0.0.1:54455
Exiting read() because no data available (4000 ms timeout).
read 860 bytes

While this tcp session makes progress (sending frames with 50 bytes of payload, every 500ms), linux tcp stack decides to reset it, when tcp_retries 2 is reached (default value : 15)

tcpdump :

15:30:28.856695 IP 127.0.0.1.56554 > 127.0.0.1.12000: S 33788768:33788768(0) win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
15:30:28.856711 IP 127.0.0.1.12000 > 127.0.0.1.56554: S 33899253:33899253(0) ack 33788769 win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
15:30:29.356947 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 1:61(60) ack 1 win 257
15:30:29.356966 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 61 win 257
15:30:29.866415 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 61:111(50) ack 1 win 257
15:30:29.866427 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 111 win 257
15:30:30.366516 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 111:161(50) ack 1 win 257
15:30:30.366527 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 161 win 257
15:30:30.876196 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 161:211(50) ack 1 win 257
15:30:30.876207 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 211 win 257
15:30:31.376282 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 211:261(50) ack 1 win 257
15:30:31.376290 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 261 win 257
15:30:31.885619 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 261:311(50) ack 1 win 257
15:30:31.885631 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 311 win 257
15:30:32.385705 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 311:361(50) ack 1 win 257
15:30:32.385715 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 361 win 257
15:30:32.895249 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 361:411(50) ack 1 win 257
15:30:32.895266 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 411 win 257
15:30:33.395341 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 411:461(50) ack 1 win 257
15:30:33.395351 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 461 win 257
15:30:33.918085 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 461:511(50) ack 1 win 257
15:30:33.918096 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 511 win 257
15:30:34.418163 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 511:561(50) ack 1 win 257
15:30:34.418172 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 561 win 257
15:30:34.927685 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 561:611(50) ack 1 win 257
15:30:34.927698 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 611 win 257
15:30:35.427757 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 611:661(50) ack 1 win 257
15:30:35.427766 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 661 win 257
15:30:35.937359 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 661:711(50) ack 1 win 257
15:30:35.937376 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 711 win 257
15:30:36.437451 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 711:761(50) ack 1 win 257
15:30:36.437464 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 761 win 257
15:30:36.947022 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 761:811(50) ack 1 win 257
15:30:36.947039 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 811 win 257
15:30:37.447135 IP 127.0.0.1.56554 > 127.0.0.1.12000: P 811:861(50) ack 1 win 257
15:30:37.447203 IP 127.0.0.1.12000 > 127.0.0.1.56554: . ack 861 win 257
15:30:41.448171 IP 127.0.0.1.12000 > 127.0.0.1.56554: F 1:1(0) ack 861 win 257
15:30:41.448189 IP 127.0.0.1.56554 > 127.0.0.1.12000: R 33789629:33789629(0) win 0

Source of program :

/*
 * small producer/consumer program.
 * setup a listener on 127.0.0.1:12000
 * Forks a child
 *   child connect to 127.0.0.1, and sends 10 bytes on this tcp socket every 100 ms
 * Father accepts connection, and read all data
 */
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <unistd.h>
#include <stdio.h>
#include <time.h>
#include <sys/poll.h>

int port = 12000;
char buffer[4096];
int main(int argc, char *argv[])
{
        int lfd = socket(AF_INET, SOCK_STREAM, 0);
        struct sockaddr_in socket_address;
        time_t t0, t1;
        int on = 1, sfd, res;
        unsigned long total = 0;
        socklen_t alen = sizeof(socket_address);
        pid_t pid;

        time(&t0);
        socket_address.sin_family = AF_INET;
        socket_address.sin_port = htons(port);
        socket_address.sin_addr.s_addr = htonl(INADDR_LOOPBACK);

        if (lfd == -1) {
                perror("socket()");
                return 1;
        }
        setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(int));
        if (bind(lfd, (struct sockaddr *)&socket_address, sizeof(socket_address)) == -1) {
                perror("bind");
                close(lfd);
                return 1;
        }
        if (listen(lfd, 1) == -1) {
                perror("listen()");
                close(lfd);
                return 1;
        }
        pid = fork();
        if (pid == 0) {
                int i, cfd = socket(AF_INET, SOCK_STREAM, 0);
                close(lfd);
                if (connect(cfd, (struct sockaddr *)&socket_address, sizeof(socket_address)) == -1) {
                        perror("connect()");
                        return 1;
                        }
                for (i = 0 ; ;) {
                        res = write(cfd, "blablabla\n", 10);
                        if (res > 0) total += res;
                        else if (res == -1) {
                                perror("write()");
                                break;
                        } else break;
                        usleep(100000);
                        if (++i == 10) {
                                system("ss -on dst 127.0.0.1:12000");
                                i = 0;
                        }
                }
                time(&t1);
                fprintf(stderr, "wrote %lu bytes but was interrupted after %g seconds\n", total, difftime(t1, t0));
                system("ss -on | grep 127.0.0.1:12000");
                close(cfd);
                return 0;
        }
        sfd = accept(lfd, (struct sockaddr *)&socket_address, &alen);
        if (sfd == -1) {
                perror("accept");
                return 1;
        }
        close(lfd);
        while (1) {
                struct pollfd pfd[1];
                pfd[0].fd = sfd;
                pfd[0].events = POLLIN;
                if (poll(pfd, 1, 4000) == 0) {
                        fprintf(stderr, "Exiting read() because no data available (4000 ms timeout).\n");
                        break;
                }
                res = read(sfd, buffer, sizeof(buffer));
                if (res > 0) total += res;
                else if (res == 0) break;
                else perror("read()");
        }
        fprintf(stderr, "read %lu bytes\n", total);
        close(sfd);
        return 0;
}
----------------------------------------

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp_input.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 1f5e6049883..75efd244f2a 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3292,6 +3292,7 @@ static int tcp_ack(struct sock *sk, struct sk_buff *skb, int flag)
 	 * log. Something worked...
 	 */
 	sk->sk_err_soft = 0;
+	icsk->icsk_probes_out = 0;
 	tp->rcv_tstamp = tcp_time_stamp;
 	prior_packets = tp->packets_out;
 	if (!prior_packets)
@@ -3324,8 +3325,6 @@ static int tcp_ack(struct sock *sk, struct sk_buff *skb, int flag)
 	return 1;
 
 no_queue:
-	icsk->icsk_probes_out = 0;
-
 	/* If this ack opens up a zero window, clear backoff.  It was
 	 * being used to time the probes, and is probably far higher than
 	 * it needs to be for normal retransmission.
-- 
cgit v1.2.3


From 70eed75d76635ba7350651b9bd96529a306ec67a Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Wed, 23 Jul 2008 16:42:42 -0700
Subject: netfilter: make security table depend on NETFILTER_ADVANCED

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/netfilter/Kconfig | 2 +-
 net/ipv6/netfilter/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index f23e60c93ef..90eb7cb47e7 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -369,7 +369,7 @@ config IP_NF_SECURITY
 	tristate "Security table"
 	depends on IP_NF_IPTABLES
 	depends on SECURITY
-	default m if NETFILTER_ADVANCED=n
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `security' table to iptables, for use
 	  with Mandatory Access Control (MAC) policy.
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index 689dec899c5..0cfcce7b18d 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -213,7 +213,7 @@ config IP6_NF_SECURITY
        tristate "Security table"
        depends on IP6_NF_IPTABLES
        depends on SECURITY
-       default m if NETFILTER_ADVANCED=n
+       depends on NETFILTER_ADVANCED
        help
          This option adds a `security' table to iptables, for use
          with Mandatory Access Control (MAC) policy.
-- 
cgit v1.2.3


From 15e8f348db372dec21229fda5d52ae6ee7e64666 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Mon, 23 Jun 2008 20:41:12 -0700
Subject: x86_64: remove bogus optimization in sysret_signal

This short-circuit path in sysret_signal looks wrong to me.
AFAICT, in practice the branch is never taken--and if it were,
it would go wrong.  To wit, try loading a module whose init
function does set_thread_flag(TIF_IRET), and see insmod crash
(presumably with a wrong user stack pointer).

This is because the FIXUP_TOP_OF_STACK work hasn't been done yet
when we jump around the call to ptregscall_common and get to
int_with_check--where it expects the user RSP,SS,CS and EFLAGS to
have been stored by FIXUP_TOP_OF_STACK.

I don't think it's normally possible to get to sysret_signal with no
_TIF_DO_NOTIFY_MASK bits set anyway, so these two instructions are
already superfluous.  If it ever did happen, it is harmless to call
do_notify_resume with nothing for it to do.

Signed-off-by: Roland McGrath <roland@redhat.com>
---
 arch/x86/kernel/entry_64.S | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 8410e26f418..a169225869c 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -402,16 +402,12 @@ sysret_careful:
 sysret_signal:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
-	testl $_TIF_DO_NOTIFY_MASK,%edx
-	jz    1f
-
-	/* Really a signal */
 	/* edx:	work flags (arg3) */
 	leaq do_notify_resume(%rip),%rax
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
 	xorl %esi,%esi # oldset -> arg2
 	call ptregscall_common
-1:	movl $_TIF_WORK_MASK,%edi
+	movl $_TIF_WORK_MASK,%edi
 	/* Use IRET because user could have changed frame. This
 	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
 	DISABLE_INTERRUPTS(CLBR_NONE)
-- 
cgit v1.2.3


From 86a1c34a929f30fde8ad01ea8245df61ddcf58b7 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Mon, 23 Jun 2008 15:37:04 -0700
Subject: x86_64 syscall audit fast-path

This adds a fast path for 64-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
This path does not need to save and restore all registers as
the general case of tracing does.  Avoiding the iret return path
when syscall audit is enabled helps performance a lot.

Signed-off-by: Roland McGrath <roland@redhat.com>
---
 arch/x86/kernel/entry_64.S | 48 ++++++++++++++++++++++++++++++++++++++++++++++
 kernel/auditsc.c           |  3 ++-
 2 files changed, 50 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index a169225869c..db7d34a89d2 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -53,6 +53,12 @@
 #include <asm/paravirt.h>
 #include <asm/ftrace.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE	   0x40000000
+
 	.code64
 
 #ifdef CONFIG_FTRACE
@@ -351,6 +357,7 @@ ENTRY(system_call_after_swapgs)
 	GET_THREAD_INFO(%rcx)
 	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
 	jnz tracesys
+system_call_fastpath:
 	cmpq $__NR_syscall_max,%rax
 	ja badsys
 	movq %r10,%rcx
@@ -402,6 +409,10 @@ sysret_careful:
 sysret_signal:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
+#ifdef CONFIG_AUDITSYSCALL
+	bt $TIF_SYSCALL_AUDIT,%edx
+	jc sysret_audit
+#endif
 	/* edx:	work flags (arg3) */
 	leaq do_notify_resume(%rip),%rax
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
@@ -418,8 +429,45 @@ badsys:
 	movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
 	jmp ret_from_sys_call
 
+#ifdef CONFIG_AUDITSYSCALL
+	/*
+	 * Fast path for syscall audit without full syscall trace.
+	 * We just call audit_syscall_entry() directly, and then
+	 * jump back to the normal fast path.
+	 */
+auditsys:
+	movq %r10,%r9			/* 6th arg: 4th syscall arg */
+	movq %rdx,%r8			/* 5th arg: 3rd syscall arg */
+	movq %rsi,%rcx			/* 4th arg: 2nd syscall arg */
+	movq %rdi,%rdx			/* 3rd arg: 1st syscall arg */
+	movq %rax,%rsi			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_X86_64,%edi	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	LOAD_ARGS 0		/* reload call-clobbered registers */
+	jmp system_call_fastpath
+
+	/*
+	 * Return fast path for syscall audit.  Call audit_syscall_exit()
+	 * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
+	 * masked off.
+	 */
+sysret_audit:
+	movq %rax,%rsi		/* second arg, syscall return value */
+	cmpq $0,%rax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%edi		/* zero-extend that into %edi */
+	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+	jmp sysret_check
+#endif	/* CONFIG_AUDITSYSCALL */
+
 	/* Do syscall tracing */
 tracesys:			 
+#ifdef CONFIG_AUDITSYSCALL
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+	jz auditsys
+#endif
 	SAVE_REST
 	movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
 	FIXUP_TOP_OF_STACK %rdi
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index c10e7aae04d..4699950e65b 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1476,7 +1476,8 @@ void audit_syscall_entry(int arch, int major,
 	struct audit_context *context = tsk->audit_context;
 	enum audit_state     state;
 
-	BUG_ON(!context);
+	if (unlikely(!context))
+		return;
 
 	/*
 	 * This happens only on certain architectures that make system
-- 
cgit v1.2.3


From 5cbf1565f29eb57a86a305b08836613508e294d7 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 24 Jun 2008 01:13:31 -0700
Subject: x86_64 ia32 syscall audit fast-path

This adds fast paths for 32-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
These paths does not need to save and restore all registers as
the general case of tracing does.  Avoiding the iret return path
when syscall audit is enabled helps performance a lot.

Signed-off-by: Roland McGrath <roland@redhat.com>
---
 arch/x86/ia32/ia32entry.S  | 91 ++++++++++++++++++++++++++++++++++++++++++++--
 arch/x86/kernel/entry_64.S |  1 +
 2 files changed, 88 insertions(+), 4 deletions(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 23d146ce676..021d71bc69b 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -15,6 +15,16 @@
 #include <asm/irqflags.h>
 #include <linux/linkage.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE	   0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysexit_audit int_ret_from_sys_call
+#define sysretl_audit int_ret_from_sys_call
+#endif
+
 #define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8)
 
 	.macro IA32_ARG_FIXUP noebp=0
@@ -148,13 +158,15 @@ ENTRY(ia32_sysenter_target)
 	ja	ia32_badsys
 sysenter_do_call:
 	IA32_ARG_FIXUP 1
+sysenter_dispatch:
 	call	*ia32_sys_call_table(,%rax,8)
 	movq	%rax,RAX-ARGOFFSET(%rsp)
 	GET_THREAD_INFO(%r10)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl	$_TIF_ALLWORK_MASK,TI_flags(%r10)
-	jnz	int_ret_from_sys_call
+	jnz	sysexit_audit
+sysexit_from_sys_call:
 	andl    $~TS_COMPAT,TI_status(%r10)
 	/* clear IF, that popfq doesn't enable interrupts early */
 	andl  $~0x200,EFLAGS-R11(%rsp) 
@@ -170,9 +182,63 @@ sysenter_do_call:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS_SYSEXIT32
 
-sysenter_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	.macro auditsys_entry_common
+	movl %esi,%r9d			/* 6th arg: 4th syscall arg */
+	movl %edx,%r8d			/* 5th arg: 3rd syscall arg */
+	/* (already in %ecx)		   4th arg: 2nd syscall arg */
+	movl %ebx,%edx			/* 3rd arg: 1st syscall arg */
+	movl %eax,%esi			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_I386,%edi	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall number */
+	cmpl $(IA32_NR_syscalls-1),%eax
+	ja ia32_badsys
+	movl %ebx,%edi			/* reload 1st syscall arg */
+	movl RCX-ARGOFFSET(%rsp),%esi	/* reload 2nd syscall arg */
+	movl RDX-ARGOFFSET(%rsp),%edx	/* reload 3rd syscall arg */
+	movl RSI-ARGOFFSET(%rsp),%ecx	/* reload 4th syscall arg */
+	movl RDI-ARGOFFSET(%rsp),%r8d	/* reload 5th syscall arg */
+	.endm
+
+	.macro auditsys_exit exit
+	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jnz int_ret_from_sys_call
+	TRACE_IRQS_ON
+	sti
+	movl %eax,%esi		/* second arg, syscall return value */
+	cmpl $0,%eax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%edi		/* zero-extend that into %edi */
+	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	GET_THREAD_INFO(%r10)
+	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall return value */
+	movl RBP-ARGOFFSET(%rsp),%ebp	/* reload user register value */
+	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+	cli
+	TRACE_IRQS_OFF
+	testl %edi,TI_flags(%r10)
+	jnz int_with_check
+	jmp \exit
+	.endm
+
+sysenter_auditsys:
 	CFI_RESTORE_STATE
+	auditsys_entry_common
+	movl %ebp,%r9d			/* reload 6th syscall arg */
+	jmp sysenter_dispatch
+
+sysexit_audit:
+	auditsys_exit sysexit_from_sys_call
+#endif
+
+sysenter_tracesys:
 	xchgl	%r9d,%ebp
+#ifdef CONFIG_AUDITSYSCALL
+	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jz	sysenter_auditsys
+#endif
 	SAVE_REST
 	CLEAR_RREGS
 	movq	%r9,R9(%rsp)
@@ -252,13 +318,15 @@ cstar_do_call:
 	cmpl $IA32_NR_syscalls-1,%eax
 	ja  ia32_badsys
 	IA32_ARG_FIXUP 1
+cstar_dispatch:
 	call *ia32_sys_call_table(,%rax,8)
 	movq %rax,RAX-ARGOFFSET(%rsp)
 	GET_THREAD_INFO(%r10)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
-	jnz  int_ret_from_sys_call
+	jnz sysretl_audit
+sysretl_from_sys_call:
 	andl $~TS_COMPAT,TI_status(%r10)
 	RESTORE_ARGS 1,-ARG_SKIP,1,1,1
 	movl RIP-ARGOFFSET(%rsp),%ecx
@@ -270,8 +338,23 @@ cstar_do_call:
 	CFI_RESTORE rsp
 	USERGS_SYSRET32
 	
-cstar_tracesys:	
+#ifdef CONFIG_AUDITSYSCALL
+cstar_auditsys:
 	CFI_RESTORE_STATE
+	movl %r9d,R9-ARGOFFSET(%rsp)	/* register to be clobbered by call */
+	auditsys_entry_common
+	movl R9-ARGOFFSET(%rsp),%r9d	/* reload 6th syscall arg */
+	jmp cstar_dispatch
+
+sysretl_audit:
+	auditsys_exit sysretl_from_sys_call
+#endif
+
+cstar_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jz cstar_auditsys
+#endif
 	xchgl %r9d,%ebp
 	SAVE_REST
 	CLEAR_RREGS
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index db7d34a89d2..89434d43960 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -492,6 +492,7 @@ tracesys:
  * Has correct top of stack, but partial stack frame.
  */
 	.globl int_ret_from_sys_call
+	.globl int_with_check
 int_ret_from_sys_call:
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-- 
cgit v1.2.3


From 0855b543222e79cbbd9d66dd56cb54740e7d524f Mon Sep 17 00:00:00 2001
From: Andre Detsch <adetsch@br.ibm.com>
Date: Thu, 24 Jul 2008 10:57:26 +1000
Subject: powerpc/spufs: fix aff_mutex and cbe_spu_info[n].list_mutex deadlock

Currenlt,, it is possible to lock aff_mutex and
cbe_spu_info[n].list_mutex in different orders, allowing a deadlock to
occur. With this change, aff_mutex is not taken within a list_mutex
critical section anymore.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/sched.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 34654743363..f293963cd85 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -389,6 +389,9 @@ static int has_affinity(struct spu_context *ctx)
 	if (list_empty(&ctx->aff_list))
 		return 0;
 
+	if (atomic_read(&ctx->gang->aff_sched_count) == 0)
+		ctx->gang->aff_ref_spu = NULL;
+
 	if (!gang->aff_ref_spu) {
 		if (!(gang->aff_flags & AFF_MERGED))
 			aff_merge_remaining_ctxs(gang);
@@ -416,14 +419,8 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
  	if (spu->ctx->flags & SPU_CREATE_NOSCHED)
 		atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
 
-	if (ctx->gang){
-		mutex_lock(&ctx->gang->aff_mutex);
-		if (has_affinity(ctx)) {
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-		}
-		mutex_unlock(&ctx->gang->aff_mutex);
-	}
+	if (ctx->gang)
+		atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
 	spu_switch_notify(spu, NULL);
 	spu_unmap_mappings(ctx);
@@ -562,10 +559,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx)
 				goto found;
 			mutex_unlock(&cbe_spu_info[node].list_mutex);
 
-			mutex_lock(&ctx->gang->aff_mutex);
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-			mutex_unlock(&ctx->gang->aff_mutex);
+			atomic_dec(&ctx->gang->aff_sched_count);
 			goto not_found;
 		}
 		mutex_unlock(&ctx->gang->aff_mutex);
-- 
cgit v1.2.3


From af0575bba0f46dd9054d46e0a88c57afad3bf4d2 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 24 Jun 2008 04:16:52 -0700
Subject: i386 syscall audit fast-path

This adds fast paths for 32-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
These paths does not need to save and restore all registers as
the general case of tracing does.  Avoiding the iret return path
when syscall audit is enabled helps performance a lot.

Signed-off-by: Roland McGrath <roland@redhat.com>
---
 arch/x86/kernel/entry_32.S | 55 ++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 53 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index cdfd94cc6b1..109792bc7cf 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -54,6 +54,16 @@
 #include <asm/ftrace.h>
 #include <asm/irq_vectors.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE	   0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysenter_audit	syscall_trace_entry
+#define sysexit_audit	syscall_exit_work
+#endif
+
 /*
  * We use macros for low-level operations which need to be overridden
  * for paravirtualization.  The following will never clobber any registers:
@@ -333,7 +343,8 @@ sysenter_past_esp:
 
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
 	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
-	jnz syscall_trace_entry
+	jnz sysenter_audit
+sysenter_do_call:
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
 	call *sys_call_table(,%eax,4)
@@ -343,7 +354,8 @@ sysenter_past_esp:
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx
-	jne syscall_exit_work
+	jne sysexit_audit
+sysenter_exit:
 /* if something modifies registers it must also disable sysexit */
 	movl PT_EIP(%esp), %edx
 	movl PT_OLDESP(%esp), %ecx
@@ -351,6 +363,45 @@ sysenter_past_esp:
 	TRACE_IRQS_ON
 1:	mov  PT_FS(%esp), %fs
 	ENABLE_INTERRUPTS_SYSEXIT
+
+#ifdef CONFIG_AUDITSYSCALL
+sysenter_audit:
+	testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	jnz syscall_trace_entry
+	addl $4,%esp
+	CFI_ADJUST_CFA_OFFSET -4
+	/* %esi already in 8(%esp)	   6th arg: 4th syscall arg */
+	/* %edx already in 4(%esp)	   5th arg: 3rd syscall arg */
+	/* %ecx already in 0(%esp)	   4th arg: 2nd syscall arg */
+	movl %ebx,%ecx			/* 3rd arg: 1st syscall arg */
+	movl %eax,%edx			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_I386,%eax	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	movl PT_EAX(%esp),%eax		/* reload syscall number */
+	jmp sysenter_do_call
+
+sysexit_audit:
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	movl %eax,%edx		/* second arg, syscall return value */
+	cmpl $0,%eax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%eax		/* zero-extend that */
+	inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	movl TI_flags(%ebp), %ecx
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	movl PT_EAX(%esp),%eax	/* reload syscall return value */
+	jmp sysenter_exit
+#endif
+
 	CFI_ENDPROC
 .pushsection .fixup,"ax"
 2:	movl $0,PT_FS(%esp)
-- 
cgit v1.2.3


From ad1ede127760d6ca4903f44dfe1a8a38b3bfb36c Mon Sep 17 00:00:00 2001
From: Andre Detsch <adetsch@br.ibm.com>
Date: Thu, 24 Jul 2008 11:01:54 +1000
Subject: powerpc/spufs: better placement of spu affinity reference context

This patch adjusts the placement of a reference context from
a spu affinity chain. The reference context can now be placed
only on nodes that have enough spus not intended to be used by
another gang (already running on the node).

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/sched.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index f293963cd85..2deeeba7ecc 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -312,10 +312,27 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff,
 	 */
 	node = cpu_to_node(raw_smp_processor_id());
 	for (n = 0; n < MAX_NUMNODES; n++, node++) {
+		int available_spus;
+
 		node = (node < MAX_NUMNODES) ? node : 0;
 		if (!node_allowed(ctx, node))
 			continue;
+
+		available_spus = 0;
 		mutex_lock(&cbe_spu_info[node].list_mutex);
+		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
+			if (spu->ctx && spu->ctx->gang
+					&& spu->ctx->aff_offset == 0)
+				available_spus -=
+					(spu->ctx->gang->contexts - 1);
+			else
+				available_spus++;
+		}
+		if (available_spus < ctx->gang->contexts) {
+			mutex_unlock(&cbe_spu_info[node].list_mutex);
+			continue;
+		}
+
 		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
 			if ((!mem_aff || spu->has_mem_affinity) &&
 							sched_spu(spu)) {
-- 
cgit v1.2.3


From 5ca33c6ac30596fc1403a092f46ea48c406734e4 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Wed, 23 Jul 2008 17:45:58 -0700
Subject: cifs: assorted endian annotations

fs/cifs/cifssmb.c:3917:13: warning: incorrect type in assignment (different base types)
fs/cifs/cifssmb.c:3917:13:    expected bool [unsigned] [usertype] is_unicode
fs/cifs/cifssmb.c:3917:13:    got restricted __le16

The comment explains why __force is used here.
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32
fs/cifs/connect.c:458:16: warning: cast to restricted __be32

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 5 ++++-
 fs/cifs/connect.c | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 4511b708f0f..7e175e1399d 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3914,7 +3914,10 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 	bool is_unicode;
 	struct dfs_referral_level_3 *ref;
 
-	is_unicode = pSMBr->hdr.Flags2 & SMBFLG2_UNICODE;
+	if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
+		is_unicode = true;
+	else
+		is_unicode = false;
 	*num_of_nodes = le16_to_cpu(pSMBr->NumberOfReferrals);
 
 	if (*num_of_nodes < 1) {
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 64446272938..b51d5777cde 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -455,7 +455,7 @@ incomplete_rcv:
 		/* Note that FC 1001 length is big endian on the wire,
 		but we convert it here so it is always manipulated
 		as host byte order */
-		pdu_length = ntohl(smb_buffer->smb_buf_length);
+		pdu_length = be32_to_cpu((__force __be32)smb_buffer->smb_buf_length);
 		smb_buffer->smb_buf_length = pdu_length;
 
 		cFYI(1, ("rfc1002 length 0x%x", pdu_length+4));
-- 
cgit v1.2.3


From f984c7b98253c541ed6e702ee521f6a84c8113d4 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Thu, 24 Jul 2008 02:34:24 +0000
Subject: Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Steven
 French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton
 <akpm@linux-foundation.org> Signed-off-by: Steve French <sfrench@us.ibm.com>

---
 fs/cifs/cifs_debug.c | 636 +++++++++++++++++++--------------------------------
 1 file changed, 241 insertions(+), 395 deletions(-)

diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index cc950f69e51..73925a77375 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -107,9 +107,7 @@ void cifs_dump_mids(struct TCP_Server_Info *server)
 #endif /* CONFIG_CIFS_DEBUG2 */
 
 #ifdef CONFIG_PROC_FS
-static int
-cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
-		     int count, int *eof, void *data)
+static int cifs_debug_data_proc_show(struct seq_file *m, void *v)
 {
 	struct list_head *tmp;
 	struct list_head *tmp1;
@@ -117,23 +115,13 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 	struct cifsSesInfo *ses;
 	struct cifsTconInfo *tcon;
 	int i;
-	int length = 0;
-	char *original_buf = buf;
 
-	*beginBuffer = buf + offset;
-
-	length =
-	    sprintf(buf,
+	seq_puts(m,
 		    "Display Internal CIFS Data Structures for Debugging\n"
 		    "---------------------------------------------------\n");
-	buf += length;
-	length = sprintf(buf, "CIFS Version %s\n", CIFS_VERSION);
-	buf += length;
-	length = sprintf(buf,
-		"Active VFS Requests: %d\n", GlobalTotalActiveXid);
-	buf += length;
-	length = sprintf(buf, "Servers:");
-	buf += length;
+	seq_printf(m, "CIFS Version %s\n", CIFS_VERSION);
+	seq_printf(m, "Active VFS Requests: %d\n", GlobalTotalActiveXid);
+	seq_printf(m, "Servers:");
 
 	i = 0;
 	read_lock(&GlobalSMBSeslock);
@@ -142,11 +130,10 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 		ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
 		if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) ||
 		   (ses->serverNOS == NULL)) {
-			buf += sprintf(buf, "\nentry for %s not fully "
+			seq_printf(m, "\nentry for %s not fully "
 					"displayed\n\t", ses->serverName);
 		} else {
-			length =
-			    sprintf(buf,
+			seq_printf(m,
 				    "\n%d) Name: %s  Domain: %s Mounts: %d OS:"
 				    " %s  \n\tNOS: %s\tCapability: 0x%x\n\tSMB"
 				    " session status: %d\t",
@@ -154,10 +141,9 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 				atomic_read(&ses->inUse),
 				ses->serverOS, ses->serverNOS,
 				ses->capabilities, ses->status);
-			buf += length;
 		}
 		if (ses->server) {
-			buf += sprintf(buf, "TCP status: %d\n\tLocal Users To "
+			seq_printf(m, "TCP status: %d\n\tLocal Users To "
 				    "Server: %d SecMode: 0x%x Req On Wire: %d",
 				ses->server->tcpStatus,
 				atomic_read(&ses->server->socketUseCount),
@@ -165,13 +151,12 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 				atomic_read(&ses->server->inFlight));
 
 #ifdef CONFIG_CIFS_STATS2
-			buf += sprintf(buf, " In Send: %d In MaxReq Wait: %d",
+			seq_printf(m, " In Send: %d In MaxReq Wait: %d",
 				atomic_read(&ses->server->inSend),
 				atomic_read(&ses->server->num_waiters));
 #endif
 
-			length = sprintf(buf, "\nMIDs:\n");
-			buf += length;
+			seq_puts(m, "\nMIDs:\n");
 
 			spin_lock(&GlobalMid_Lock);
 			list_for_each(tmp1, &ses->server->pending_mid_q) {
@@ -179,7 +164,7 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 					mid_q_entry,
 					qhead);
 				if (mid_entry) {
-					length = sprintf(buf,
+					seq_printf(m,
 							"State: %d com: %d pid:"
 							" %d tsk: %p mid %d\n",
 							mid_entry->midState,
@@ -187,7 +172,6 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 							mid_entry->pid,
 							mid_entry->tsk,
 							mid_entry->mid);
-					buf += length;
 				}
 			}
 			spin_unlock(&GlobalMid_Lock);
@@ -195,11 +179,9 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 
 	}
 	read_unlock(&GlobalSMBSeslock);
-	sprintf(buf, "\n");
-	buf++;
+	seq_putc(m, '\n');
 
-	length = sprintf(buf, "Shares:");
-	buf += length;
+	seq_puts(m, "Shares:");
 
 	i = 0;
 	read_lock(&GlobalSMBSeslock);
@@ -208,62 +190,52 @@ cifs_debug_data_read(char *buf, char **beginBuffer, off_t offset,
 		i++;
 		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
 		dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType);
-		length = sprintf(buf, "\n%d) %s Uses: %d ", i,
+		seq_printf(m, "\n%d) %s Uses: %d ", i,
 				 tcon->treeName, atomic_read(&tcon->useCount));
-		buf += length;
 		if (tcon->nativeFileSystem) {
-			length = sprintf(buf, "Type: %s ",
+			seq_printf(m, "Type: %s ",
 					 tcon->nativeFileSystem);
-			buf += length;
 		}
-		length = sprintf(buf, "DevInfo: 0x%x Attributes: 0x%x"
+		seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x"
 				 "\nPathComponentMax: %d Status: %d",
 			    le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics),
 			    le32_to_cpu(tcon->fsAttrInfo.Attributes),
 			    le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength),
 			    tcon->tidStatus);
-		buf += length;
 		if (dev_type == FILE_DEVICE_DISK)
-			length = sprintf(buf, " type: DISK ");
+			seq_puts(m, " type: DISK ");
 		else if (dev_type == FILE_DEVICE_CD_ROM)
-			length = sprintf(buf, " type: CDROM ");
+			seq_puts(m, " type: CDROM ");
 		else
-			length =
-			    sprintf(buf, " type: %d ", dev_type);
-		buf += length;
+			seq_printf(m, " type: %d ", dev_type);
 		if (tcon->tidStatus == CifsNeedReconnect) {
-			buf += sprintf(buf, "\tDISCONNECTED ");
-			length += 14;
+			seq_puts(m, "\tDISCONNECTED ");
 		}
 	}
 	read_unlock(&GlobalSMBSeslock);
 
-	length = sprintf(buf, "\n");
-	buf += length;
+	seq_putc(m, '\n');
 
 	/* BB add code to dump additional info such as TCP session info now */
-	/* Now calculate total size of returned data */
-	length = buf - original_buf;
-
-	if (offset + count >= length)
-		*eof = 1;
-	if (length < offset) {
-		*eof = 1;
-		return 0;
-	} else {
-		length = length - offset;
-	}
-	if (length > count)
-		length = count;
+	return 0;
+}
 
-	return length;
+static int cifs_debug_data_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_debug_data_proc_show, NULL);
 }
 
-#ifdef CONFIG_CIFS_STATS
+static const struct file_operations cifs_debug_data_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_debug_data_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 
-static int
-cifs_stats_write(struct file *file, const char __user *buffer,
-		 unsigned long count, void *data)
+#ifdef CONFIG_CIFS_STATS
+static ssize_t cifs_stats_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -307,236 +279,127 @@ cifs_stats_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-cifs_stats_read(char *buf, char **beginBuffer, off_t offset,
-		  int count, int *eof, void *data)
+static int cifs_stats_proc_show(struct seq_file *m, void *v)
 {
-	int item_length, i, length;
+	int i;
 	struct list_head *tmp;
 	struct cifsTconInfo *tcon;
 
-	*beginBuffer = buf + offset;
-
-	length = sprintf(buf,
+	seq_printf(m,
 			"Resources in use\nCIFS Session: %d\n",
 			sesInfoAllocCount.counter);
-	buf += length;
-	item_length =
-		sprintf(buf, "Share (unique mount targets): %d\n",
+	seq_printf(m, "Share (unique mount targets): %d\n",
 			tconInfoAllocCount.counter);
-	length += item_length;
-	buf += item_length;
-	item_length =
-		sprintf(buf, "SMB Request/Response Buffer: %d Pool size: %d\n",
+	seq_printf(m, "SMB Request/Response Buffer: %d Pool size: %d\n",
 			bufAllocCount.counter,
 			cifs_min_rcv + tcpSesAllocCount.counter);
-	length += item_length;
-	buf += item_length;
-	item_length =
-		sprintf(buf, "SMB Small Req/Resp Buffer: %d Pool size: %d\n",
+	seq_printf(m, "SMB Small Req/Resp Buffer: %d Pool size: %d\n",
 			smBufAllocCount.counter, cifs_min_small);
-	length += item_length;
-	buf += item_length;
 #ifdef CONFIG_CIFS_STATS2
-	item_length = sprintf(buf, "Total Large %d Small %d Allocations\n",
+	seq_printf(m, "Total Large %d Small %d Allocations\n",
 				atomic_read(&totBufAllocCount),
 				atomic_read(&totSmBufAllocCount));
-	length += item_length;
-	buf += item_length;
 #endif /* CONFIG_CIFS_STATS2 */
 
-	item_length =
-		sprintf(buf, "Operations (MIDs): %d\n",
-			midCount.counter);
-	length += item_length;
-	buf += item_length;
-	item_length = sprintf(buf,
+	seq_printf(m, "Operations (MIDs): %d\n", midCount.counter);
+	seq_printf(m,
 		"\n%d session %d share reconnects\n",
 		tcpSesReconnectCount.counter, tconInfoReconnectCount.counter);
-	length += item_length;
-	buf += item_length;
 
-	item_length = sprintf(buf,
+	seq_printf(m,
 		"Total vfs operations: %d maximum at one time: %d\n",
 		GlobalCurrentXid, GlobalMaxActiveXid);
-	length += item_length;
-	buf += item_length;
 
 	i = 0;
 	read_lock(&GlobalSMBSeslock);
 	list_for_each(tmp, &GlobalTreeConnectionList) {
 		i++;
 		tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
-		item_length = sprintf(buf, "\n%d) %s", i, tcon->treeName);
-		buf += item_length;
-		length += item_length;
-		if (tcon->tidStatus == CifsNeedReconnect) {
-			buf += sprintf(buf, "\tDISCONNECTED ");
-			length += 14;
-		}
-		item_length = sprintf(buf, "\nSMBs: %d Oplock Breaks: %d",
+		seq_printf(m, "\n%d) %s", i, tcon->treeName);
+		if (tcon->tidStatus == CifsNeedReconnect)
+			seq_puts(m, "\tDISCONNECTED ");
+		seq_printf(m, "\nSMBs: %d Oplock Breaks: %d",
 			atomic_read(&tcon->num_smbs_sent),
 			atomic_read(&tcon->num_oplock_brks));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nReads:  %d Bytes: %lld",
+		seq_printf(m, "\nReads:  %d Bytes: %lld",
 			atomic_read(&tcon->num_reads),
 			(long long)(tcon->bytes_read));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nWrites: %d Bytes: %lld",
+		seq_printf(m, "\nWrites: %d Bytes: %lld",
 			atomic_read(&tcon->num_writes),
 			(long long)(tcon->bytes_written));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf,
+		seq_printf(m,
 			"\nLocks: %d HardLinks: %d Symlinks: %d",
 			atomic_read(&tcon->num_locks),
 			atomic_read(&tcon->num_hardlinks),
 			atomic_read(&tcon->num_symlinks));
-		buf += item_length;
-		length += item_length;
 
-		item_length = sprintf(buf, "\nOpens: %d Closes: %d Deletes: %d",
+		seq_printf(m, "\nOpens: %d Closes: %d Deletes: %d",
 			atomic_read(&tcon->num_opens),
 			atomic_read(&tcon->num_closes),
 			atomic_read(&tcon->num_deletes));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nMkdirs: %d Rmdirs: %d",
+		seq_printf(m, "\nMkdirs: %d Rmdirs: %d",
 			atomic_read(&tcon->num_mkdirs),
 			atomic_read(&tcon->num_rmdirs));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nRenames: %d T2 Renames %d",
+		seq_printf(m, "\nRenames: %d T2 Renames %d",
 			atomic_read(&tcon->num_renames),
 			atomic_read(&tcon->num_t2renames));
-		buf += item_length;
-		length += item_length;
-		item_length = sprintf(buf, "\nFindFirst: %d FNext %d FClose %d",
+		seq_printf(m, "\nFindFirst: %d FNext %d FClose %d",
 			atomic_read(&tcon->num_ffirst),
 			atomic_read(&tcon->num_fnext),
 			atomic_read(&tcon->num_fclose));
-		buf += item_length;
-		length += item_length;
 	}
 	read_unlock(&GlobalSMBSeslock);
 
-	buf += sprintf(buf, "\n");
-	length++;
-
-	if (offset + count >= length)
-		*eof = 1;
-	if (length < offset) {
-		*eof = 1;
-		return 0;
-	} else {
-		length = length - offset;
-	}
-	if (length > count)
-		length = count;
+	seq_putc(m, '\n');
+	return 0;
+}
 
-	return length;
+static int cifs_stats_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_stats_proc_show, NULL);
 }
+
+static const struct file_operations cifs_stats_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_stats_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_stats_proc_write,
+};
 #endif /* STATS */
 
 static struct proc_dir_entry *proc_fs_cifs;
-read_proc_t cifs_txanchor_read;
-static read_proc_t cifsFYI_read;
-static write_proc_t cifsFYI_write;
-static read_proc_t oplockEnabled_read;
-static write_proc_t oplockEnabled_write;
-static read_proc_t lookupFlag_read;
-static write_proc_t lookupFlag_write;
-static read_proc_t traceSMB_read;
-static write_proc_t traceSMB_write;
-static read_proc_t multiuser_mount_read;
-static write_proc_t multiuser_mount_write;
-static read_proc_t security_flags_read;
-static write_proc_t security_flags_write;
-/* static read_proc_t ntlmv2_enabled_read;
-static write_proc_t ntlmv2_enabled_write;
-static read_proc_t packet_signing_enabled_read;
-static write_proc_t packet_signing_enabled_write;*/
-static read_proc_t experimEnabled_read;
-static write_proc_t experimEnabled_write;
-static read_proc_t linuxExtensionsEnabled_read;
-static write_proc_t linuxExtensionsEnabled_write;
+static const struct file_operations cifsFYI_proc_fops;
+static const struct file_operations cifs_oplock_proc_fops;
+static const struct file_operations cifs_lookup_cache_proc_fops;
+static const struct file_operations traceSMB_proc_fops;
+static const struct file_operations cifs_multiuser_mount_proc_fops;
+static const struct file_operations cifs_security_flags_proc_fops;
+static const struct file_operations cifs_experimental_proc_fops;
+static const struct file_operations cifs_linux_ext_proc_fops;
 
 void
 cifs_proc_init(void)
 {
-	struct proc_dir_entry *pde;
-
 	proc_fs_cifs = proc_mkdir("fs/cifs", NULL);
 	if (proc_fs_cifs == NULL)
 		return;
 
 	proc_fs_cifs->owner = THIS_MODULE;
-	create_proc_read_entry("DebugData", 0, proc_fs_cifs,
-				cifs_debug_data_read, NULL);
+	proc_create("DebugData", 0, proc_fs_cifs, &cifs_debug_data_proc_fops);
 
 #ifdef CONFIG_CIFS_STATS
-	pde = create_proc_read_entry("Stats", 0, proc_fs_cifs,
-				cifs_stats_read, NULL);
-	if (pde)
-		pde->write_proc = cifs_stats_write;
+	proc_create("Stats", 0, proc_fs_cifs, &cifs_stats_proc_fops);
 #endif /* STATS */
-	pde = create_proc_read_entry("cifsFYI", 0, proc_fs_cifs,
-				cifsFYI_read, NULL);
-	if (pde)
-		pde->write_proc = cifsFYI_write;
-
-	pde =
-	    create_proc_read_entry("traceSMB", 0, proc_fs_cifs,
-				traceSMB_read, NULL);
-	if (pde)
-		pde->write_proc = traceSMB_write;
-
-	pde = create_proc_read_entry("OplockEnabled", 0, proc_fs_cifs,
-				oplockEnabled_read, NULL);
-	if (pde)
-		pde->write_proc = oplockEnabled_write;
-
-	pde = create_proc_read_entry("Experimental", 0, proc_fs_cifs,
-				experimEnabled_read, NULL);
-	if (pde)
-		pde->write_proc = experimEnabled_write;
-
-	pde = create_proc_read_entry("LinuxExtensionsEnabled", 0, proc_fs_cifs,
-				linuxExtensionsEnabled_read, NULL);
-	if (pde)
-		pde->write_proc = linuxExtensionsEnabled_write;
-
-	pde =
-	    create_proc_read_entry("MultiuserMount", 0, proc_fs_cifs,
-				multiuser_mount_read, NULL);
-	if (pde)
-		pde->write_proc = multiuser_mount_write;
-
-	pde =
-	    create_proc_read_entry("SecurityFlags", 0, proc_fs_cifs,
-				security_flags_read, NULL);
-	if (pde)
-		pde->write_proc = security_flags_write;
-
-	pde =
-	create_proc_read_entry("LookupCacheEnabled", 0, proc_fs_cifs,
-				lookupFlag_read, NULL);
-	if (pde)
-		pde->write_proc = lookupFlag_write;
-
-/*	pde =
-	    create_proc_read_entry("NTLMV2Enabled", 0, proc_fs_cifs,
-				ntlmv2_enabled_read, NULL);
-	if (pde)
-		pde->write_proc = ntlmv2_enabled_write;
-
-	pde =
-	    create_proc_read_entry("PacketSigningEnabled", 0, proc_fs_cifs,
-				packet_signing_enabled_read, NULL);
-	if (pde)
-		pde->write_proc = packet_signing_enabled_write;*/
+	proc_create("cifsFYI", 0, proc_fs_cifs, &cifsFYI_proc_fops);
+	proc_create("traceSMB", 0, proc_fs_cifs, &traceSMB_proc_fops);
+	proc_create("OplockEnabled", 0, proc_fs_cifs, &cifs_oplock_proc_fops);
+	proc_create("Experimental", 0, proc_fs_cifs, &cifs_experimental_proc_fops);
+	proc_create("LinuxExtensionsEnabled", 0, proc_fs_cifs, &cifs_linux_ext_proc_fops);
+	proc_create("MultiuserMount", 0, proc_fs_cifs, &cifs_multiuser_mount_proc_fops);
+	proc_create("SecurityFlags", 0, proc_fs_cifs, &cifs_security_flags_proc_fops);
+	proc_create("LookupCacheEnabled", 0, proc_fs_cifs, &cifs_lookup_cache_proc_fops);
 }
 
 void
@@ -553,39 +416,26 @@ cifs_proc_clean(void)
 #endif
 	remove_proc_entry("MultiuserMount", proc_fs_cifs);
 	remove_proc_entry("OplockEnabled", proc_fs_cifs);
-/*	remove_proc_entry("NTLMV2Enabled",proc_fs_cifs); */
 	remove_proc_entry("SecurityFlags", proc_fs_cifs);
-/*	remove_proc_entry("PacketSigningEnabled", proc_fs_cifs); */
 	remove_proc_entry("LinuxExtensionsEnabled", proc_fs_cifs);
 	remove_proc_entry("Experimental", proc_fs_cifs);
 	remove_proc_entry("LookupCacheEnabled", proc_fs_cifs);
 	remove_proc_entry("fs/cifs", NULL);
 }
 
-static int
-cifsFYI_read(char *page, char **start, off_t off, int count,
-	     int *eof, void *data)
+static int cifsFYI_proc_show(struct seq_file *m, void *v)
 {
-	int len;
-
-	len = sprintf(page, "%d\n", cifsFYI);
-
-	len -= off;
-	*start = page + off;
-
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+	seq_printf(m, "%d\n", cifsFYI);
+	return 0;
+}
 
-	return len;
+static int cifsFYI_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifsFYI_proc_show, NULL);
 }
-static int
-cifsFYI_write(struct file *file, const char __user *buffer,
-	      unsigned long count, void *data)
+
+static ssize_t cifsFYI_proc_write(struct file *file, const char __user *buffer,
+		size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -603,30 +453,28 @@ cifsFYI_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-oplockEnabled_read(char *page, char **start, off_t off,
-		   int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%d\n", oplockEnabled);
+static const struct file_operations cifsFYI_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifsFYI_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifsFYI_proc_write,
+};
 
-	len -= off;
-	*start = page + off;
-
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+static int cifs_oplock_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", oplockEnabled);
+	return 0;
+}
 
-	return len;
+static int cifs_oplock_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_oplock_proc_show, NULL);
 }
-static int
-oplockEnabled_write(struct file *file, const char __user *buffer,
-		    unsigned long count, void *data)
+
+static ssize_t cifs_oplock_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -642,30 +490,28 @@ oplockEnabled_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-experimEnabled_read(char *page, char **start, off_t off,
-		    int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%d\n", experimEnabled);
-
-	len -= off;
-	*start = page + off;
-
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
+static const struct file_operations cifs_oplock_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_oplock_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_oplock_proc_write,
+};
 
-	if (len < 0)
-		len = 0;
+static int cifs_experimental_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", experimEnabled);
+	return 0;
+}
 
-	return len;
+static int cifs_experimental_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_experimental_proc_show, NULL);
 }
-static int
-experimEnabled_write(struct file *file, const char __user *buffer,
-		     unsigned long count, void *data)
+
+static ssize_t cifs_experimental_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -683,29 +529,28 @@ experimEnabled_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-linuxExtensionsEnabled_read(char *page, char **start, off_t off,
-			    int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%d\n", linuxExtEnabled);
-	len -= off;
-	*start = page + off;
-
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
+static const struct file_operations cifs_experimental_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_experimental_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_experimental_proc_write,
+};
 
-	if (len < 0)
-		len = 0;
+static int cifs_linux_ext_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", linuxExtEnabled);
+	return 0;
+}
 
-	return len;
+static int cifs_linux_ext_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_linux_ext_proc_show, NULL);
 }
-static int
-linuxExtensionsEnabled_write(struct file *file, const char __user *buffer,
-			     unsigned long count, void *data)
+
+static ssize_t cifs_linux_ext_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -721,31 +566,28 @@ linuxExtensionsEnabled_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
+static const struct file_operations cifs_linux_ext_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_linux_ext_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_linux_ext_proc_write,
+};
 
-static int
-lookupFlag_read(char *page, char **start, off_t off,
-		int count, int *eof, void *data)
+static int cifs_lookup_cache_proc_show(struct seq_file *m, void *v)
 {
-	int len;
-
-	len = sprintf(page, "%d\n", lookupCacheEnabled);
-
-	len -= off;
-	*start = page + off;
-
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+	seq_printf(m, "%d\n", lookupCacheEnabled);
+	return 0;
+}
 
-	return len;
+static int cifs_lookup_cache_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_lookup_cache_proc_show, NULL);
 }
-static int
-lookupFlag_write(struct file *file, const char __user *buffer,
-		    unsigned long count, void *data)
+
+static ssize_t cifs_lookup_cache_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -760,30 +602,29 @@ lookupFlag_write(struct file *file, const char __user *buffer,
 
 	return count;
 }
-static int
-traceSMB_read(char *page, char **start, off_t off, int count,
-	      int *eof, void *data)
-{
-	int len;
 
-	len = sprintf(page, "%d\n", traceSMB);
+static const struct file_operations cifs_lookup_cache_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_lookup_cache_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_lookup_cache_proc_write,
+};
 
-	len -= off;
-	*start = page + off;
-
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+static int traceSMB_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", traceSMB);
+	return 0;
+}
 
-	return len;
+static int traceSMB_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, traceSMB_proc_show, NULL);
 }
-static int
-traceSMB_write(struct file *file, const char __user *buffer,
-	       unsigned long count, void *data)
+
+static ssize_t traceSMB_proc_write(struct file *file, const char __user *buffer,
+		size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -799,30 +640,28 @@ traceSMB_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-multiuser_mount_read(char *page, char **start, off_t off,
-		     int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "%d\n", multiuser_mount);
-
-	len -= off;
-	*start = page + off;
+static const struct file_operations traceSMB_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= traceSMB_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= traceSMB_proc_write,
+};
 
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+static int cifs_multiuser_mount_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "%d\n", multiuser_mount);
+	return 0;
+}
 
-	return len;
+static int cifs_multiuser_mount_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_multiuser_mount_proc_show, NULL);
 }
-static int
-multiuser_mount_write(struct file *file, const char __user *buffer,
-		      unsigned long count, void *data)
+
+static ssize_t cifs_multiuser_mount_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	char c;
 	int rc;
@@ -838,30 +677,28 @@ multiuser_mount_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static int
-security_flags_read(char *page, char **start, off_t off,
-		       int count, int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "0x%x\n", extended_security);
-
-	len -= off;
-	*start = page + off;
+static const struct file_operations cifs_multiuser_mount_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_multiuser_mount_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_multiuser_mount_proc_write,
+};
 
-	if (len > count)
-		len = count;
-	else
-		*eof = 1;
-
-	if (len < 0)
-		len = 0;
+static int cifs_security_flags_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "0x%x\n", extended_security);
+	return 0;
+}
 
-	return len;
+static int cifs_security_flags_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cifs_security_flags_proc_show, NULL);
 }
-static int
-security_flags_write(struct file *file, const char __user *buffer,
-			unsigned long count, void *data)
+
+static ssize_t cifs_security_flags_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *ppos)
 {
 	unsigned int flags;
 	char flags_string[12];
@@ -917,6 +754,15 @@ security_flags_write(struct file *file, const char __user *buffer,
 	/* BB should we turn on MAY flags for other MUST options? */
 	return count;
 }
+
+static const struct file_operations cifs_security_flags_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cifs_security_flags_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= cifs_security_flags_proc_write,
+};
 #else
 inline void cifs_proc_init(void)
 {
-- 
cgit v1.2.3


From 99b1f5b2f6cd2f65cce02c5f63302df5878a5fbc Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 24 Jul 2008 02:37:45 +0000
Subject: [CIFS] remove checkpatch warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_debug.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 73925a77375..c213aa40064 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -395,11 +395,16 @@ cifs_proc_init(void)
 	proc_create("cifsFYI", 0, proc_fs_cifs, &cifsFYI_proc_fops);
 	proc_create("traceSMB", 0, proc_fs_cifs, &traceSMB_proc_fops);
 	proc_create("OplockEnabled", 0, proc_fs_cifs, &cifs_oplock_proc_fops);
-	proc_create("Experimental", 0, proc_fs_cifs, &cifs_experimental_proc_fops);
-	proc_create("LinuxExtensionsEnabled", 0, proc_fs_cifs, &cifs_linux_ext_proc_fops);
-	proc_create("MultiuserMount", 0, proc_fs_cifs, &cifs_multiuser_mount_proc_fops);
-	proc_create("SecurityFlags", 0, proc_fs_cifs, &cifs_security_flags_proc_fops);
-	proc_create("LookupCacheEnabled", 0, proc_fs_cifs, &cifs_lookup_cache_proc_fops);
+	proc_create("Experimental", 0, proc_fs_cifs,
+		    &cifs_experimental_proc_fops);
+	proc_create("LinuxExtensionsEnabled", 0, proc_fs_cifs,
+		    &cifs_linux_ext_proc_fops);
+	proc_create("MultiuserMount", 0, proc_fs_cifs,
+		    &cifs_multiuser_mount_proc_fops);
+	proc_create("SecurityFlags", 0, proc_fs_cifs,
+		    &cifs_security_flags_proc_fops);
+	proc_create("LookupCacheEnabled", 0, proc_fs_cifs,
+		    &cifs_lookup_cache_proc_fops);
 }
 
 void
@@ -655,9 +660,9 @@ static int cifs_multiuser_mount_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int cifs_multiuser_mount_proc_open(struct inode *inode, struct file *file)
+static int cifs_multiuser_mount_proc_open(struct inode *inode, struct file *fh)
 {
-	return single_open(file, cifs_multiuser_mount_proc_show, NULL);
+	return single_open(fh, cifs_multiuser_mount_proc_show, NULL);
 }
 
 static ssize_t cifs_multiuser_mount_proc_write(struct file *file,
-- 
cgit v1.2.3


From 6f75a9b6426e686649ac440c37ec7c249501f9a5 Mon Sep 17 00:00:00 2001
From: Chas Williams <chas@cmf.nrl.navy.mil>
Date: Wed, 23 Jul 2008 20:29:21 -0700
Subject: atm: [fore200e] use MODULE_FIRMWARE() and other suggested cleanups

Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/atm/fore200e.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index d5c1bbfbe79..73338d231db 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2562,7 +2562,8 @@ fore200e_load_and_start_fw(struct fore200e* fore200e)
     const struct firmware *firmware;
     struct device *device;
     struct fw_header *fw_header;
-    u32 *fw_data, fw_size;
+    const __le32 *fw_data;
+    u32 fw_size;
     u32 __iomem *load_addr;
     char buf[48];
     int err = -ENODEV;
@@ -2582,7 +2583,7 @@ fore200e_load_and_start_fw(struct fore200e* fore200e)
 	return err;
     }
 
-    fw_data = (u32 *) firmware->data;
+    fw_data = (__le32 *) firmware->data;
     fw_size = firmware->size / sizeof(u32);
     fw_header = (struct fw_header *) firmware->data;
     load_addr = fore200e->virt_base + le32_to_cpu(fw_header->load_offset);
@@ -3199,6 +3200,14 @@ static const struct fore200e_bus fore200e_bus[] = {
     {}
 };
 
-#ifdef MODULE_LICENSE
 MODULE_LICENSE("GPL");
+#ifdef CONFIG_PCI
+#ifdef __LITTLE_ENDIAN__
+MODULE_FIRMWARE("pca200e.bin");
+#else
+MODULE_FIRMWARE("pca200e_ecd.bin2");
+#endif
+#endif /* CONFIG_PCI */
+#ifdef CONFIG_SBUS
+MODULE_FIRMWARE("sba200e_ecd.bin2");
 #endif
-- 
cgit v1.2.3


From f867e6af94239a04ec23aeec2fcda5aa58e41db7 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Wed, 23 Jul 2008 21:34:27 -0700
Subject: pkt_sched: sch_sfq: dump a real number of flows

Dump the "flows" number according to the number of active flows
instead of repeating the "limit".

Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_sfq.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index 8589da66656..73f53844ce9 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -536,7 +536,14 @@ static int sfq_dump(struct Qdisc *sch, struct sk_buff *skb)
 
 	opt.limit = q->limit;
 	opt.divisor = SFQ_HASH_DIVISOR;
-	opt.flows = q->limit;
+	opt.flows = 0;
+	if (q->tail != SFQ_DEPTH) {
+		unsigned int i;
+
+		for (i = 0; i < SFQ_HASH_DIVISOR; i++)
+			if (q->ht[i] != SFQ_DEPTH)
+				opt.flows++;
+	}
 
 	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
 
-- 
cgit v1.2.3


From 1986b0cb1671ea39178b4e2b00461109728fc935 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 24 Jul 2008 08:10:02 +0200
Subject: ftrace: remove latency-tracer leftover

remove the :vim=ft=help tag from trace files.

I used them years ago to syntax-highlight traces and forgot about this hack.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 868e121c8e3..fc20e09a6cb 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1203,9 +1203,6 @@ static void *s_next(struct seq_file *m, void *v, loff_t *pos)
 
 	iter->pos = *pos;
 
-	if (last_ent && !ent)
-		seq_puts(m, "\n\nvim:ft=help\n");
-
 	return ent;
 }
 
-- 
cgit v1.2.3


From 9e882c9282512cc622752f29ec7c29ce338fc1eb Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 21 Jul 2008 16:49:54 -0700
Subject: x86: call early_cpu_init at the same point

Call early_cpu_init() at the same (early) point in setup_arch().
The x86_64 code was calling it relatively late, after when other arch
code need to do cpu-related setup which depends on it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b4aacb9f52e..b520dae02bf 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -597,11 +597,11 @@ void __init setup_arch(char **cmdline_p)
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
 	visws_early_detect();
 	pre_setup_arch_hook();
-	early_cpu_init();
 #else
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
+	early_cpu_init();
 	early_ioremap_init();
 
 	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
@@ -665,9 +665,6 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = virt_to_phys(&__bss_start);
 	bss_resource.end = virt_to_phys(&__bss_stop)-1;
 
-#ifdef CONFIG_X86_64
-	early_cpu_init();
-#endif
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
-- 
cgit v1.2.3


From 2dc1697eb355c34f9f7bcbbb83f490de248c360a Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 21 Jul 2008 16:49:58 -0700
Subject: xen: don't use sysret for sysexit32

When implementing sysexit32, don't let Xen use sysret to return to
userspace.  That results in usermode register state being trashed.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/xen-asm_64.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 4038cbfe333..7f58304fafb 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -173,7 +173,7 @@ ENTRY(xen_sysexit)
 	pushq $__USER32_CS
 	pushq %rdx
 
-	pushq $VGCF_in_syscall
+	pushq $0
 1:	jmp hypercall_iret
 ENDPATCH(xen_sysexit)
 RELOC(xen_sysexit, 1b+1)
-- 
cgit v1.2.3


From 979c9296bdcfded58ebac41905c3397317df0355 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 14 May 2008 16:10:33 +0300
Subject: UBI: print error code

Print error code if checking failed which is very useful
to identify problems.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/vtbl.c | 39 +++++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index af36b12be27..3c4d68f2cfd 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -127,7 +127,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 		      const struct ubi_vtbl_record *vtbl)
 {
 	int i, n, reserved_pebs, alignment, data_pad, vol_type, name_len;
-	int upd_marker;
+	int upd_marker, err;
 	uint32_t crc;
 	const char *name;
 
@@ -153,7 +153,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 		if (reserved_pebs == 0) {
 			if (memcmp(&vtbl[i], &empty_vtbl_record,
 						UBI_VTBL_RECORD_SIZE)) {
-				dbg_err("bad empty record");
+				err = 2;
 				goto bad;
 			}
 			continue;
@@ -161,56 +161,57 @@ static int vtbl_check(const struct ubi_device *ubi,
 
 		if (reserved_pebs < 0 || alignment < 0 || data_pad < 0 ||
 		    name_len < 0) {
-			dbg_err("negative values");
+			err = 3;
 			goto bad;
 		}
 
 		if (alignment > ubi->leb_size || alignment == 0) {
-			dbg_err("bad alignment");
+			err = 4;
 			goto bad;
 		}
 
 		n = alignment % ubi->min_io_size;
 		if (alignment != 1 && n) {
-			dbg_err("alignment is not multiple of min I/O unit");
+			err = 5;
 			goto bad;
 		}
 
 		n = ubi->leb_size % alignment;
 		if (data_pad != n) {
 			dbg_err("bad data_pad, has to be %d", n);
+			err = 6;
 			goto bad;
 		}
 
 		if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) {
-			dbg_err("bad vol_type");
+			err = 7;
 			goto bad;
 		}
 
 		if (upd_marker != 0 && upd_marker != 1) {
-			dbg_err("bad upd_marker");
+			err = 8;
 			goto bad;
 		}
 
 		if (reserved_pebs > ubi->good_peb_count) {
 			dbg_err("too large reserved_pebs, good PEBs %d",
 				ubi->good_peb_count);
+			err = 9;
 			goto bad;
 		}
 
 		if (name_len > UBI_VOL_NAME_MAX) {
-			dbg_err("too long volume name, max %d",
-				UBI_VOL_NAME_MAX);
+			err = 10;
 			goto bad;
 		}
 
 		if (name[0] == '\0') {
-			dbg_err("NULL volume name");
+			err = 11;
 			goto bad;
 		}
 
 		if (name_len != strnlen(name, name_len + 1)) {
-			dbg_err("bad name_len");
+			err = 12;
 			goto bad;
 		}
 	}
@@ -235,7 +236,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 	return 0;
 
 bad:
-	ubi_err("volume table check failed, record %d", i);
+	ubi_err("volume table check failed: record %d, error %d", i, err);
 	ubi_dbg_dump_vtbl_record(&vtbl[i], i);
 	return -EINVAL;
 }
@@ -620,30 +621,32 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 static int check_sv(const struct ubi_volume *vol,
 		    const struct ubi_scan_volume *sv)
 {
+	int err;
+
 	if (sv->highest_lnum >= vol->reserved_pebs) {
-		dbg_err("bad highest_lnum");
+		err = 1;
 		goto bad;
 	}
 	if (sv->leb_count > vol->reserved_pebs) {
-		dbg_err("bad leb_count");
+		err = 2;
 		goto bad;
 	}
 	if (sv->vol_type != vol->vol_type) {
-		dbg_err("bad vol_type");
+		err = 3;
 		goto bad;
 	}
 	if (sv->used_ebs > vol->reserved_pebs) {
-		dbg_err("bad used_ebs");
+		err = 4;
 		goto bad;
 	}
 	if (sv->data_pad != vol->data_pad) {
-		dbg_err("bad data_pad");
+		err = 5;
 		goto bad;
 	}
 	return 0;
 
 bad:
-	ubi_err("bad scanning information");
+	ubi_err("bad scanning information, error %d", err);
 	ubi_dbg_dump_sv(sv);
 	ubi_dbg_dump_vol_info(vol);
 	return -EINVAL;
-- 
cgit v1.2.3


From beeea636030622f6de67d15c61f5b311a03d188c Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Tue, 20 May 2008 09:54:02 +0300
Subject: UBI: add a comment

It is not clear why we schedule PEB for scrubbing in case of
-EBADMSG. Elaborate.

Requested-by: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/vtbl.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 3c4d68f2cfd..42a7815086b 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -385,7 +385,16 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 		err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
 				       ubi->vtbl_size);
 		if (err == UBI_IO_BITFLIPS || err == -EBADMSG)
-			/* Scrub the PEB later */
+			/*
+			 * Scrub the PEB later. Note, -EBADMSG indicates an
+			 * uncorrectable ECC error, but we have our own CRC and
+			 * the data will be checked later. If the data is OK,
+			 * the PEB will be scrubbed (because we set
+			 * seb->scrub). If the data is not OK, the contents of
+			 * the PEB will be recovered from the second copy, and
+			 * seb->scrub will be cleared in
+			 * 'ubi_scan_add_used()'.
+			 */
 			seb->scrub = 1;
 		else if (err)
 			goto out_free;
-- 
cgit v1.2.3


From a0fd1efd488092951f310fdb777b8a540cf84dcb Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kmpark@infradead.org>
Date: Wed, 21 May 2008 14:34:56 +0300
Subject: UBI: fix buffer padding

Instead of correctly pad the buffer wich we are writing to the
eraseblock during update, we used weird construct:

memset(buf + len, 0xFF, len - len);

Fix this.

Signed-off-by: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/upd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index ddaa1a56cc6..6fa1ab3f2a7 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -237,10 +237,10 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 	int err;
 
 	if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
-		len = ALIGN(len, ubi->min_io_size);
-		memset(buf + len, 0xFF, len - len);
+		int l = ALIGN(len, ubi->min_io_size);
 
-		len = ubi_calc_data_len(ubi, buf, len);
+		memset(buf + len, 0xFF, l - len);
+		len = ubi_calc_data_len(ubi, buf, l);
 		if (len == 0) {
 			dbg_msg("all %d bytes contain 0xFF - skip", len);
 			return 0;
-- 
cgit v1.2.3


From cadb40ccc16a26a738f1cbc963e35b21edd93e79 Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kyungmin.park@samsung.com>
Date: Thu, 22 May 2008 10:32:18 +0900
Subject: UBI: avoid unnecessary division operations

UBI already checks that @min io size is the power of 2 at io_init.
It is save to use bit operations then.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c | 8 ++++++--
 drivers/mtd/ubi/cdev.c  | 6 +++---
 drivers/mtd/ubi/eba.c   | 2 +-
 drivers/mtd/ubi/kapi.c  | 6 +++---
 drivers/mtd/ubi/misc.c  | 2 +-
 drivers/mtd/ubi/vmt.c   | 2 +-
 drivers/mtd/ubi/vtbl.c  | 5 ++---
 drivers/mtd/ubi/wl.c    | 3 +--
 8 files changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 961416ac061..ff4425de152 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -530,7 +530,11 @@ static int io_init(struct ubi_device *ubi)
 	ubi->min_io_size = ubi->mtd->writesize;
 	ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
 
-	/* Make sure minimal I/O unit is power of 2 */
+	/*
+	 * Make sure minimal I/O unit is power of 2. Note, there is no
+	 * fundamental reason for this assumption. It is just an optimization
+	 * which allows us to avoid costly division operations.
+	 */
 	if (!is_power_of_2(ubi->min_io_size)) {
 		ubi_err("min. I/O unit (%d) is not power of 2",
 			ubi->min_io_size);
@@ -581,7 +585,7 @@ static int io_init(struct ubi_device *ubi)
 	if (ubi->vid_hdr_offset < UBI_EC_HDR_SIZE ||
 	    ubi->leb_start < ubi->vid_hdr_offset + UBI_VID_HDR_SIZE ||
 	    ubi->leb_start > ubi->peb_size - UBI_VID_HDR_SIZE ||
-	    ubi->leb_start % ubi->min_io_size) {
+	    ubi->leb_start & (ubi->min_io_size - 1)) {
 		ubi_err("bad VID header (%d) or data offsets (%d)",
 			ubi->vid_hdr_offset, ubi->leb_start);
 		return -EINVAL;
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 89193ba9451..0cdaf9fba7b 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -295,7 +295,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 	off = do_div(tmp, vol->usable_leb_size);
 	lnum = tmp;
 
-	if (off % ubi->min_io_size) {
+	if (off & (ubi->min_io_size - 1)) {
 		dbg_err("unaligned position");
 		return -EINVAL;
 	}
@@ -304,7 +304,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 		count_save = count = vol->used_bytes - *offp;
 
 	/* We can write only in fractions of the minimum I/O unit */
-	if (count % ubi->min_io_size) {
+	if (count & (ubi->min_io_size - 1)) {
 		dbg_err("unaligned write length");
 		return -EINVAL;
 	}
@@ -564,7 +564,7 @@ static int verify_mkvol_req(const struct ubi_device *ubi,
 	if (req->alignment > ubi->leb_size)
 		goto bad;
 
-	n = req->alignment % ubi->min_io_size;
+	n = req->alignment & (ubi->min_io_size - 1);
 	if (req->alignment != 1 && n)
 		goto bad;
 
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 7ce91ca742b..37d77844794 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -752,7 +752,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
 		/* If this is the last LEB @len may be unaligned */
 		len = ALIGN(data_size, ubi->min_io_size);
 	else
-		ubi_assert(len % ubi->min_io_size == 0);
+		ubi_assert(!(len & (ubi->min_io_size - 1)));
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
 	if (!vid_hdr)
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index a70d58823f8..51508832566 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -397,8 +397,8 @@ int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 		return -EROFS;
 
 	if (lnum < 0 || lnum >= vol->reserved_pebs || offset < 0 || len < 0 ||
-	    offset + len > vol->usable_leb_size || offset % ubi->min_io_size ||
-	    len % ubi->min_io_size)
+	    offset + len > vol->usable_leb_size ||
+	    offset & (ubi->min_io_size - 1) || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
 	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
@@ -447,7 +447,7 @@ int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
 		return -EROFS;
 
 	if (lnum < 0 || lnum >= vol->reserved_pebs || len < 0 ||
-	    len > vol->usable_leb_size || len % ubi->min_io_size)
+	    len > vol->usable_leb_size || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
 	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
diff --git a/drivers/mtd/ubi/misc.c b/drivers/mtd/ubi/misc.c
index 93e05281201..22ad3140294 100644
--- a/drivers/mtd/ubi/misc.c
+++ b/drivers/mtd/ubi/misc.c
@@ -37,7 +37,7 @@ int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf,
 {
 	int i;
 
-	ubi_assert(length % ubi->min_io_size == 0);
+	ubi_assert(!(length & (ubi->min_io_size - 1)));
 
 	for (i = length - 1; i >= 0; i--)
 		if (((const uint8_t *)buf)[i] != 0xFF)
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 5be58d85c63..7402025ded9 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -727,7 +727,7 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 		goto fail;
 	}
 
-	n = vol->alignment % ubi->min_io_size;
+	n = vol->alignment & (ubi->min_io_size - 1);
 	if (vol->alignment != 1 && n) {
 		ubi_err("alignment is not multiple of min I/O unit");
 		goto fail;
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 42a7815086b..d9af11a8682 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -170,7 +170,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 			goto bad;
 		}
 
-		n = alignment % ubi->min_io_size;
+		n = alignment & (ubi->min_io_size - 1);
 		if (alignment != 1 && n) {
 			err = 5;
 			goto bad;
@@ -684,14 +684,13 @@ static int check_scanning_info(const struct ubi_device *ubi,
 		return -EINVAL;
 	}
 
-	if (si->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT&&
+	if (si->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
 	    si->highest_vol_id < UBI_INTERNAL_VOL_START) {
 		ubi_err("too large volume ID %d found by scanning",
 			si->highest_vol_id);
 		return -EINVAL;
 	}
 
-
 	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
 		cond_resched();
 
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index a471a491f0a..cc8fe2934d2 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1368,7 +1368,7 @@ int ubi_thread(void *u)
 		int err;
 
 		if (kthread_should_stop())
-			goto out;
+			break;
 
 		if (try_to_freeze())
 			continue;
@@ -1403,7 +1403,6 @@ int ubi_thread(void *u)
 		cond_resched();
 	}
 
-out:
 	dbg_wl("background thread \"%s\" is killed", ubi->bgt_name);
 	return 0;
 }
-- 
cgit v1.2.3


From abc5e92262d87f9c5c628492bffc55f81c7dcb80 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 4 Jun 2008 16:48:12 +0300
Subject: UBI: fix memory leak

ubi_free_volume() function sets ubi->volumes[] to NULL, so
ubi_eba_close() is useless, it does not free what has to be freed.
So zap it and free vol->eba_tbl at the volume release function.

Pointed-out-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c |  2 --
 drivers/mtd/ubi/eba.c   | 17 -----------------
 drivers/mtd/ubi/ubi.h   |  1 -
 drivers/mtd/ubi/vmt.c   | 18 +++++++++---------
 4 files changed, 9 insertions(+), 29 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index ff4425de152..7b42b4d05b3 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -840,7 +840,6 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 out_uif:
 	uif_close(ubi);
 out_detach:
-	ubi_eba_close(ubi);
 	ubi_wl_close(ubi);
 	vfree(ubi->vtbl);
 out_free:
@@ -903,7 +902,6 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 		kthread_stop(ubi->bgt_thread);
 
 	uif_close(ubi);
-	ubi_eba_close(ubi);
 	ubi_wl_close(ubi);
 	vfree(ubi->vtbl);
 	put_mtd_device(ubi->mtd);
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 37d77844794..623d25f4855 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1233,20 +1233,3 @@ out_free:
 	}
 	return err;
 }
-
-/**
- * ubi_eba_close - close EBA unit.
- * @ubi: UBI device description object
- */
-void ubi_eba_close(const struct ubi_device *ubi)
-{
-	int i, num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
-
-	dbg_eba("close EBA unit");
-
-	for (i = 0; i < num_volumes; i++) {
-		if (!ubi->volumes[i])
-			continue;
-		kfree(ubi->volumes[i]->eba_tbl);
-	}
-}
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 67dcbd11c15..940f6b7deec 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -477,7 +477,6 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		     struct ubi_vid_hdr *vid_hdr);
 int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
-void ubi_eba_close(const struct ubi_device *ubi);
 
 /* wl.c */
 int ubi_wl_get_peb(struct ubi_device *ubi, int dtype);
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 7402025ded9..367b04176e0 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -127,6 +127,7 @@ static void vol_release(struct device *dev)
 {
 	struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev);
 
+	kfree(vol->eba_tbl);
 	kfree(vol);
 }
 
@@ -201,7 +202,7 @@ static void volume_sysfs_close(struct ubi_volume *vol)
  */
 int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 {
-	int i, err, vol_id = req->vol_id, dont_free = 0;
+	int i, err, vol_id = req->vol_id, do_free = 1;
 	struct ubi_volume *vol;
 	struct ubi_vtbl_record vtbl_rec;
 	uint64_t bytes;
@@ -365,14 +366,14 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 
 out_sysfs:
 	/*
-	 * We have registered our device, we should not free the volume*
+	 * We have registered our device, we should not free the volume
 	 * description object in this function in case of an error - it is
 	 * freed by the release function.
 	 *
 	 * Get device reference to prevent the release function from being
 	 * called just after sysfs has been closed.
 	 */
-	dont_free = 1;
+	do_free = 0;
 	get_device(&vol->dev);
 	volume_sysfs_close(vol);
 out_gluebi:
@@ -382,17 +383,18 @@ out_gluebi:
 out_cdev:
 	cdev_del(&vol->cdev);
 out_mapping:
-	kfree(vol->eba_tbl);
+	if (do_free)
+		kfree(vol->eba_tbl);
 out_acc:
 	spin_lock(&ubi->volumes_lock);
 	ubi->rsvd_pebs -= vol->reserved_pebs;
 	ubi->avail_pebs += vol->reserved_pebs;
 out_unlock:
 	spin_unlock(&ubi->volumes_lock);
-	if (dont_free)
-		put_device(&vol->dev);
-	else
+	if (do_free)
 		kfree(vol);
+	else
+		put_device(&vol->dev);
 	ubi_err("cannot create volume %d, error %d", vol_id, err);
 	return err;
 }
@@ -445,8 +447,6 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 			goto out_err;
 	}
 
-	kfree(vol->eba_tbl);
-	vol->eba_tbl = NULL;
 	cdev_del(&vol->cdev);
 	volume_sysfs_close(vol);
 
-- 
cgit v1.2.3


From 505d1caa79cd61a70615e9a7eae2eab85e797a83 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 4 Jun 2008 17:00:35 +0300
Subject: UBI: do not forget to free internal volumes

UBI forgets to free internal volumes when detaching MTD device.
Fix this.

Pointed-out-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 7b42b4d05b3..33205e4c1f5 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -422,6 +422,10 @@ out_unreg:
 /**
  * uif_close - close user interfaces for an UBI device.
  * @ubi: UBI device description object
+ *
+ * Note, since this function un-registers UBI volume device objects (@vol->dev),
+ * the memory allocated voe the volumes is freed as well (in the release
+ * function).
  */
 static void uif_close(struct ubi_device *ubi)
 {
@@ -431,6 +435,21 @@ static void uif_close(struct ubi_device *ubi)
 	unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1);
 }
 
+/**
+ * free_internal_volumes - free internal volumes.
+ * @ubi: UBI device description object
+ */
+static void free_internal_volumes(struct ubi_device *ubi)
+{
+	int i;
+
+	for (i = ubi->vtbl_slots;
+	     i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
+		kfree(ubi->volumes[i]->eba_tbl);
+		kfree(ubi->volumes[i]);
+	}
+}
+
 /**
  * attach_by_scanning - attach an MTD device using scanning method.
  * @ubi: UBI device descriptor
@@ -475,6 +494,7 @@ static int attach_by_scanning(struct ubi_device *ubi)
 out_wl:
 	ubi_wl_close(ubi);
 out_vtbl:
+	free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 out_si:
 	ubi_scan_destroy_si(si);
@@ -650,7 +670,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 
 	/*
 	 * Clear the auto-resize flag in the volume in-memory copy of the
-	 * volume table, and 'ubi_resize_volume()' will propogate this change
+	 * volume table, and 'ubi_resize_volume()' will propagate this change
 	 * to the flash.
 	 */
 	ubi->vtbl[vol_id].flags &= ~UBI_VTBL_AUTORESIZE_FLG;
@@ -659,7 +679,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 		struct ubi_vtbl_record vtbl_rec;
 
 		/*
-		 * No avalilable PEBs to re-size the volume, clear the flag on
+		 * No available PEBs to re-size the volume, clear the flag on
 		 * flash and exit.
 		 */
 		memcpy(&vtbl_rec, &ubi->vtbl[vol_id],
@@ -692,7 +712,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
  *
  * This function attaches MTD device @mtd_dev to UBI and assign @ubi_num number
  * to the newly created UBI device, unless @ubi_num is %UBI_DEV_NUM_AUTO, in
- * which case this function finds a vacant device nubert and assings it
+ * which case this function finds a vacant device number and assigns it
  * automatically. Returns the new UBI device number in case of success and a
  * negative error code in case of failure.
  *
@@ -841,6 +861,7 @@ out_uif:
 	uif_close(ubi);
 out_detach:
 	ubi_wl_close(ubi);
+	free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 out_free:
 	vfree(ubi->peb_buf1);
@@ -903,6 +924,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 
 	uif_close(ubi);
 	ubi_wl_close(ubi);
+	free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 	put_mtd_device(ubi->mtd);
 	vfree(ubi->peb_buf1);
-- 
cgit v1.2.3


From 472018f73e7308a7f29b753ee8c742b6f45f103f Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 4 Jun 2008 17:58:37 +0300
Subject: UBI: fix memory leak on error path

Normally UBI volumes are freed in the release function of
the struct device object. However, on error path they may
have to be freed before the struct device objects have been
initialized.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c | 34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 33205e4c1f5..a5b19944eca 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -354,16 +354,35 @@ static void kill_volumes(struct ubi_device *ubi)
 			ubi_free_volume(ubi, ubi->volumes[i]);
 }
 
+/**
+ * free_user_volumes - free all user volumes.
+ * @ubi: UBI device description object
+ *
+ * Normally the volumes are freed at the release function of the volume device
+ * objects. However, on error paths the volumes have to be freed before the
+ * device objects have been initialized.
+ */
+static void free_user_volumes(struct ubi_device *ubi)
+{
+	int i;
+
+	for (i = 0; i < ubi->vtbl_slots; i++)
+		if (ubi->volumes[i]) {
+			kfree(ubi->volumes[i]->eba_tbl);
+			kfree(ubi->volumes[i]);
+		}
+}
+
 /**
  * uif_init - initialize user interfaces for an UBI device.
  * @ubi: UBI device description object
  *
  * This function returns zero in case of success and a negative error code in
- * case of failure.
+ * case of failure. Note, this function destroys all volumes if it failes.
  */
 static int uif_init(struct ubi_device *ubi)
 {
-	int i, err;
+	int i, err, do_free = 0;
 	dev_t dev;
 
 	sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num);
@@ -410,10 +429,13 @@ static int uif_init(struct ubi_device *ubi)
 
 out_volumes:
 	kill_volumes(ubi);
+	do_free = 0;
 out_sysfs:
 	ubi_sysfs_close(ubi);
 	cdev_del(&ubi->cdev);
 out_unreg:
+	if (do_free)
+		free_user_volumes(ubi);
 	unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1);
 	ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err);
 	return err;
@@ -722,7 +744,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 {
 	struct ubi_device *ubi;
-	int i, err;
+	int i, err, do_free = 1;
 
 	/*
 	 * Check if we already have the same MTD device attached.
@@ -822,7 +844,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 
 	err = uif_init(ubi);
 	if (err)
-		goto out_detach;
+		goto out_nofree;
 
 	ubi->bgt_thread = kthread_create(ubi_thread, ubi, ubi->bgt_name);
 	if (IS_ERR(ubi->bgt_thread)) {
@@ -859,8 +881,12 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 
 out_uif:
 	uif_close(ubi);
+out_nofree:
+	do_free = 0;
 out_detach:
 	ubi_wl_close(ubi);
+	if (do_free)
+		free_user_volumes(ubi);
 	free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 out_free:
-- 
cgit v1.2.3


From 23add7455c42eef63f8719bd268328047d4aed69 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 16 Jun 2008 13:35:23 +0300
Subject: UBI: fix LEB locking

leb_read_unlock() may be called simultaniously by several tasks.
The would race at the following code:

 up_read(&le->mutex);
 if (free)
         kfree(le);

And it is possible that one task frees 'le' before the other tasks
do 'up_read()'. Fix this by doing up_read and free inside the
'ubi->ltree' lock. Below it the oops we had because of this:

BUG: spinlock bad magic on CPU#0, integck/7504
BUG: unable to handle kernel paging request at 6b6b6c4f
IP: [<c0211221>] spin_bug+0x5c/0xdb
*pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ubifs ubi nandsim nand nand_ids nand_ecc video output

Pid: 7504, comm: integck Not tainted (2.6.26-rc3ubifs26 #8)
EIP: 0060:[<c0211221>] EFLAGS: 00010002 CPU: 0
EIP is at spin_bug+0x5c/0xdb
EAX: 00000032 EBX: 6b6b6b6b ECX: 6b6b6b6b EDX: f7f7ce30
ESI: f76491dc EDI: c044f51f EBP: e8a736cc ESP: e8a736a8
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process integck (pid: 7504, ti=e8a72000 task=f7f7ce30 task.ti=e8a72000)
Stack: c044f754 c044f51f 00000000 f7f7d024 00001d50 00000001 f76491dc 00000296       f6df50e0 e8a736d8 c02112f0 f76491dc e8a736e8 c039157a f7d9e830 f76491d8       e8a7370c c020b975 f76491dc 00000296 f76491f8 00000000 f76491d8 00000000 Call Trace:
[<c02112f0>] ? _raw_spin_unlock+0x50/0x7c
[<c039157a>] ? _spin_unlock_irqrestore+0x20/0x58
[<c020b975>] ? rwsem_wake+0x4b/0x122
[<c0390e0a>] ? call_rwsem_wake+0xa/0xc
[<c0139ee7>] ? up_read+0x28/0x31
[<f8873b3c>] ? leb_read_unlock+0x73/0x7b [ubi]
[<f88742a3>] ? ubi_eba_read_leb+0x195/0x2b0 [ubi]
[<f8872a04>] ? ubi_leb_read+0xaf/0xf8 [ubi]

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/eba.c | 27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 623d25f4855..8dc488fc0cd 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -223,22 +223,18 @@ static int leb_read_lock(struct ubi_device *ubi, int vol_id, int lnum)
  */
 static void leb_read_unlock(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int free = 0;
 	struct ubi_ltree_entry *le;
 
 	spin_lock(&ubi->ltree_lock);
 	le = ltree_lookup(ubi, vol_id, lnum);
 	le->users -= 1;
 	ubi_assert(le->users >= 0);
+	up_read(&le->mutex);
 	if (le->users == 0) {
 		rb_erase(&le->rb, &ubi->ltree);
-		free = 1;
+		kfree(le);
 	}
 	spin_unlock(&ubi->ltree_lock);
-
-	up_read(&le->mutex);
-	if (free)
-		kfree(le);
 }
 
 /**
@@ -274,7 +270,6 @@ static int leb_write_lock(struct ubi_device *ubi, int vol_id, int lnum)
  */
 static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int free;
 	struct ubi_ltree_entry *le;
 
 	le = ltree_add_entry(ubi, vol_id, lnum);
@@ -289,12 +284,9 @@ static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
 	ubi_assert(le->users >= 0);
 	if (le->users == 0) {
 		rb_erase(&le->rb, &ubi->ltree);
-		free = 1;
-	} else
-		free = 0;
-	spin_unlock(&ubi->ltree_lock);
-	if (free)
 		kfree(le);
+	}
+	spin_unlock(&ubi->ltree_lock);
 
 	return 1;
 }
@@ -307,23 +299,18 @@ static int leb_write_trylock(struct ubi_device *ubi, int vol_id, int lnum)
  */
 static void leb_write_unlock(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int free;
 	struct ubi_ltree_entry *le;
 
 	spin_lock(&ubi->ltree_lock);
 	le = ltree_lookup(ubi, vol_id, lnum);
 	le->users -= 1;
 	ubi_assert(le->users >= 0);
+	up_write(&le->mutex);
 	if (le->users == 0) {
 		rb_erase(&le->rb, &ubi->ltree);
-		free = 1;
-	} else
-		free = 0;
-	spin_unlock(&ubi->ltree_lock);
-
-	up_write(&le->mutex);
-	if (free)
 		kfree(le);
+	}
+	spin_unlock(&ubi->ltree_lock);
 }
 
 /**
-- 
cgit v1.2.3


From 73789a3d9fd8e500e121c1d4a5a2b16dd748ab5f Mon Sep 17 00:00:00 2001
From: Bruce Leonard <brucle@selinc.com>
Date: Thu, 3 Jul 2008 10:35:49 +0300
Subject: UBI: fix 64-bit calculations

Signed-off-by: Bruce Leonard <brucle@selinc.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/cdev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 0cdaf9fba7b..3e3449ec07f 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -437,7 +437,8 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
 			break;
 		}
 
-		rsvd_bytes = vol->reserved_pebs * (ubi->leb_size-vol->data_pad);
+		rsvd_bytes = (long long)vol->reserved_pebs *
+					ubi->leb_size-vol->data_pad;
 		if (bytes < 0 || bytes > rsvd_bytes) {
 			err = -EINVAL;
 			break;
-- 
cgit v1.2.3


From a5bf6190417cbbf80443a9f71c65b653e13e9982 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Thu, 10 Jul 2008 18:38:33 +0300
Subject: UBI: add ubi_sync() interface

To flush MTD device caches.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/kapi.c  | 24 ++++++++++++++++++++++++
 include/linux/mtd/ubi.h |  1 +
 2 files changed, 25 insertions(+)

diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index 51508832566..e65c8e0bcd5 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -632,3 +632,27 @@ int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum)
 	return vol->eba_tbl[lnum] >= 0;
 }
 EXPORT_SYMBOL_GPL(ubi_is_mapped);
+
+/**
+ * ubi_sync - synchronize UBI device buffers.
+ * @ubi_num: UBI device to synchronize
+ *
+ * The underlying MTD device may cache data in hardware or in software. This
+ * function ensures the caches are flushed. Returns zero in case of success and
+ * a negative error code in case of failure.
+ */
+int ubi_sync(int ubi_num)
+{
+	struct ubi_device *ubi;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	if (ubi->mtd->sync)
+		ubi->mtd->sync(ubi->mtd);
+
+	ubi_put_device(ubi);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ubi_sync);
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
index f71201d0f3e..83302bbbddb 100644
--- a/include/linux/mtd/ubi.h
+++ b/include/linux/mtd/ubi.h
@@ -152,6 +152,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
 int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
 int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype);
 int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
+int ubi_sync(int ubi_num);
 
 /*
  * This function is the same as the 'ubi_leb_read()' function, but it does not
-- 
cgit v1.2.3


From a6ea440769e11c46828cddd20f91ab57261701d5 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 13 Jul 2008 21:46:24 +0300
Subject: UBI: improve mkvol request validation

Check that volume name is not shorter than 'name_len'.

No need to copy the trailing zero byte because whole array
was zeroed earlier.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/cdev.c | 7 +++++--
 drivers/mtd/ubi/vmt.c  | 4 ++--
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 3e3449ec07f..4fb84e3e650 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -574,6 +574,10 @@ static int verify_mkvol_req(const struct ubi_device *ubi,
 		goto bad;
 	}
 
+	n = strnlen(req->name, req->name_len + 1);
+	if (n != req->name_len)
+		goto bad;
+
 	return 0;
 
 bad:
@@ -629,12 +633,11 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 			break;
 		}
 
+		req.name[req.name_len] = '\0';
 		err = verify_mkvol_req(ubi, &req);
 		if (err)
 			break;
 
-		req.name[req.name_len] = '\0';
-
 		mutex_lock(&ubi->volumes_mutex);
 		err = ubi_create_volume(ubi, &req);
 		mutex_unlock(&ubi->volumes_mutex);
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 367b04176e0..bfa7c5d2e06 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -275,7 +275,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	vol->data_pad  = ubi->leb_size % vol->alignment;
 	vol->vol_type  = req->vol_type;
 	vol->name_len  = req->name_len;
-	memcpy(vol->name, req->name, vol->name_len + 1);
+	memcpy(vol->name, req->name, vol->name_len);
 	vol->ubi = ubi;
 
 	/*
@@ -350,7 +350,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		vtbl_rec.vol_type = UBI_VID_DYNAMIC;
 	else
 		vtbl_rec.vol_type = UBI_VID_STATIC;
-	memcpy(vtbl_rec.name, vol->name, vol->name_len + 1);
+	memcpy(vtbl_rec.name, vol->name, vol->name_len);
 
 	err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
 	if (err)
-- 
cgit v1.2.3


From bb84c1a199558962edf4b4aeb4480fb09aa09b91 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 14 Jul 2008 12:57:27 +0300
Subject: UBI: fix error message

The ubi_err() macro will add \n.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/gluebi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index e909b390069..ae76ab638b2 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -299,7 +299,7 @@ int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol)
 		mtd->size = vol->used_bytes;
 
 	if (add_mtd_device(mtd)) {
-		ubi_err("cannot not add MTD device\n");
+		ubi_err("cannot not add MTD device");
 		kfree(mtd->name);
 		return -ENFILE;
 	}
-- 
cgit v1.2.3


From 85c6e6e28259e9b58b8984db536c45bc3161f40c Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 16 Jul 2008 10:25:56 +0300
Subject: UBI: amend commentaries

Hch asked not to use "unit" for sub-systems, let it be so.
Also some other commentaries modifications.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c     |  2 +-
 drivers/mtd/ubi/debug.h     |  6 +--
 drivers/mtd/ubi/eba.c       | 22 +++++------
 drivers/mtd/ubi/io.c        | 22 +++++------
 drivers/mtd/ubi/scan.c      | 28 +++++++-------
 drivers/mtd/ubi/scan.h      | 19 +++++----
 drivers/mtd/ubi/ubi-media.h | 23 +++++------
 drivers/mtd/ubi/ubi.h       | 37 +++++++++---------
 drivers/mtd/ubi/wl.c        | 94 ++++++++++++++++++++++-----------------------
 include/linux/mtd/ubi.h     |  4 +-
 10 files changed, 129 insertions(+), 128 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index a5b19944eca..27271fe32e0 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -524,7 +524,7 @@ out_si:
 }
 
 /**
- * io_init - initialize I/O unit for a given UBI device.
+ * io_init - initialize I/O sub-system for a given UBI device.
  * @ubi: UBI device description object
  *
  * If @ubi->vid_hdr_offset or @ubi->leb_start is zero, default offsets are
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 8ea99d8c9e1..7d8d77c31df 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -76,21 +76,21 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
 #endif /* CONFIG_MTD_UBI_DEBUG_MSG */
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_EBA
-/* Messages from the eraseblock association unit */
+/* Messages from the eraseblock association sub-system */
 #define dbg_eba(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
 #define dbg_eba(fmt, ...) ({})
 #endif
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_WL
-/* Messages from the wear-leveling unit */
+/* Messages from the wear-leveling sub-system */
 #define dbg_wl(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
 #define dbg_wl(fmt, ...) ({})
 #endif
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_IO
-/* Messages from the input/output unit */
+/* Messages from the input/output sub-system */
 #define dbg_io(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
 #define dbg_io(fmt, ...) ({})
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488fc0cd..613cd1e5164 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -19,20 +19,20 @@
  */
 
 /*
- * The UBI Eraseblock Association (EBA) unit.
+ * The UBI Eraseblock Association (EBA) sub-system.
  *
- * This unit is responsible for I/O to/from logical eraseblock.
+ * This sub-system is responsible for I/O to/from logical eraseblock.
  *
  * Although in this implementation the EBA table is fully kept and managed in
  * RAM, which assumes poor scalability, it might be (partially) maintained on
  * flash in future implementations.
  *
- * The EBA unit implements per-logical eraseblock locking. Before accessing a
- * logical eraseblock it is locked for reading or writing. The per-logical
- * eraseblock locking is implemented by means of the lock tree. The lock tree
- * is an RB-tree which refers all the currently locked logical eraseblocks. The
- * lock tree elements are &struct ubi_ltree_entry objects. They are indexed by
- * (@vol_id, @lnum) pairs.
+ * The EBA sub-system implements per-logical eraseblock locking. Before
+ * accessing a logical eraseblock it is locked for reading or writing. The
+ * per-logical eraseblock locking is implemented by means of the lock tree. The
+ * lock tree is an RB-tree which refers all the currently locked logical
+ * eraseblocks. The lock tree elements are &struct ubi_ltree_entry objects.
+ * They are indexed by (@vol_id, @lnum) pairs.
  *
  * EBA also maintains the global sequence counter which is incremented each
  * time a logical eraseblock is mapped to a physical eraseblock and it is
@@ -1128,7 +1128,7 @@ out_unlock_leb:
 }
 
 /**
- * ubi_eba_init_scan - initialize the EBA unit using scanning information.
+ * ubi_eba_init_scan - initialize the EBA sub-system using scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  *
@@ -1143,7 +1143,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 	struct ubi_scan_leb *seb;
 	struct rb_node *rb;
 
-	dbg_eba("initialize EBA unit");
+	dbg_eba("initialize EBA sub-system");
 
 	spin_lock_init(&ubi->ltree_lock);
 	mutex_init(&ubi->alc_mutex);
@@ -1209,7 +1209,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		ubi->rsvd_pebs  += ubi->beb_rsvd_pebs;
 	}
 
-	dbg_eba("EBA unit is initialized");
+	dbg_eba("EBA sub-system is initialized");
 	return 0;
 
 out_free:
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 4ac11df7b04..561e7b2f96c 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -20,15 +20,15 @@
  */
 
 /*
- * UBI input/output unit.
+ * UBI input/output sub-system.
  *
- * This unit provides a uniform way to work with all kinds of the underlying
- * MTD devices. It also implements handy functions for reading and writing UBI
- * headers.
+ * This sub-system provides a uniform way to work with all kinds of the
+ * underlying MTD devices. It also implements handy functions for reading and
+ * writing UBI headers.
  *
  * We are trying to have a paranoid mindset and not to trust to what we read
- * from the flash media in order to be more secure and robust. So this unit
- * validates every single header it reads from the flash media.
+ * from the flash media in order to be more secure and robust. So this
+ * sub-system validates every single header it reads from the flash media.
  *
  * Some words about how the eraseblock headers are stored.
  *
@@ -79,11 +79,11 @@
  * 512-byte chunks, we have to allocate one more buffer and copy our VID header
  * to offset 448 of this buffer.
  *
- * The I/O unit does the following trick in order to avoid this extra copy.
- * It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID header
- * and returns a pointer to offset @ubi->vid_hdr_shift of this buffer. When the
- * VID header is being written out, it shifts the VID header pointer back and
- * writes the whole sub-page.
+ * The I/O sub-system does the following trick in order to avoid this extra
+ * copy. It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID
+ * header and returns a pointer to offset @ubi->vid_hdr_shift of this buffer.
+ * When the VID header is being written out, it shifts the VID header pointer
+ * back and writes the whole sub-page.
  */
 
 #include <linux/crc32.h>
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 96d410e106a..892c2ba4977 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -19,9 +19,9 @@
  */
 
 /*
- * UBI scanning unit.
+ * UBI scanning sub-system.
  *
- * This unit is responsible for scanning the flash media, checking UBI
+ * This sub-system is responsible for scanning the flash media, checking UBI
  * headers and providing complete information about the UBI flash image.
  *
  * The scanning information is represented by a &struct ubi_scan_info' object.
@@ -103,7 +103,7 @@ static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
  * non-zero if an inconsistency was found and zero if not.
  *
  * Note, UBI does sanity check of everything it reads from the flash media.
- * Most of the checks are done in the I/O unit. Here we check that the
+ * Most of the checks are done in the I/O sub-system. Here we check that the
  * information in the VID header is consistent to the information in other VID
  * headers of the same volume.
  */
@@ -256,8 +256,8 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 		 * that versions that are close to %0xFFFFFFFF are less then
 		 * versions that are close to %0.
 		 *
-		 * The UBI WL unit guarantees that the number of pending tasks
-		 * is not greater then %0x7FFFFFFF. So, if the difference
+		 * The UBI WL sub-system guarantees that the number of pending
+		 * tasks is not greater then %0x7FFFFFFF. So, if the difference
 		 * between any two versions is greater or equivalent to
 		 * %0x7FFFFFFF, there was an overflow and the logical
 		 * eraseblock with lower version is actually newer then the one
@@ -645,9 +645,9 @@ void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
  *
  * This function erases physical eraseblock 'pnum', and writes the erase
  * counter header to it. This function should only be used on UBI device
- * initialization stages, when the EBA unit had not been yet initialized. This
- * function returns zero in case of success and a negative error code in case
- * of failure.
+ * initialization stages, when the EBA sub-system had not been yet initialized.
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
  */
 int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		       int pnum, int ec)
@@ -687,9 +687,10 @@ out_free:
  * @si: scanning information
  *
  * This function returns a free physical eraseblock. It is supposed to be
- * called on the UBI initialization stages when the wear-leveling unit is not
- * initialized yet. This function picks a physical eraseblocks from one of the
- * lists, writes the EC header if it is needed, and removes it from the list.
+ * called on the UBI initialization stages when the wear-leveling sub-system is
+ * not initialized yet. This function picks a physical eraseblocks from one of
+ * the lists, writes the EC header if it is needed, and removes it from the
+ * list.
  *
  * This function returns scanning physical eraseblock information in case of
  * success and an error code in case of failure.
@@ -764,8 +765,9 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, int pnum
 		return err;
 	else if (err) {
 		/*
-		 * FIXME: this is actually duty of the I/O unit to initialize
-		 * this, but MTD does not provide enough information.
+		 * FIXME: this is actually duty of the I/O sub-system to
+		 * initialize this, but MTD does not provide enough
+		 * information.
 		 */
 		si->bad_peb_count += 1;
 		return 0;
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index 966b9b682a4..4e2e3cc0bec 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -59,16 +59,16 @@ struct ubi_scan_leb {
  * @leb_count: number of logical eraseblocks in this volume
  * @vol_type: volume type
  * @used_ebs: number of used logical eraseblocks in this volume (only for
- * static volumes)
+ *            static volumes)
  * @last_data_size: amount of data in the last logical eraseblock of this
- * volume (always equivalent to the usable logical eraseblock size in case of
- * dynamic volumes)
+ *                  volume (always equivalent to the usable logical eraseblock
+ *                  size in case of dynamic volumes)
  * @data_pad: how many bytes at the end of logical eraseblocks of this volume
- * are not used (due to volume alignment)
+ *            are not used (due to volume alignment)
  * @compat: compatibility flags of this volume
  * @rb: link in the volume RB-tree
  * @root: root of the RB-tree containing all the eraseblock belonging to this
- * volume (&struct ubi_scan_leb objects)
+ *        volume (&struct ubi_scan_leb objects)
  *
  * One object of this type is allocated for each volume during scanning.
  */
@@ -92,8 +92,8 @@ struct ubi_scan_volume {
  * @free: list of free physical eraseblocks
  * @erase: list of physical eraseblocks which have to be erased
  * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
+ *         those belonging to "preserve"-compatible internal volumes)
  * @bad_peb_count: count of bad physical eraseblocks
- * those belonging to "preserve"-compatible internal volumes)
  * @vols_found: number of volumes found during scanning
  * @highest_vol_id: highest volume ID
  * @alien_peb_count: count of physical eraseblocks in the @alien list
@@ -106,8 +106,8 @@ struct ubi_scan_volume {
  * @ec_count: a temporary variable used when calculating @mean_ec
  *
  * This data structure contains the result of scanning and may be used by other
- * UBI units to build final UBI data structures, further error-recovery and so
- * on.
+ * UBI sub-systems to build final UBI data structures, further error-recovery
+ * and so on.
  */
 struct ubi_scan_info {
 	struct rb_root volumes;
@@ -132,8 +132,7 @@ struct ubi_device;
 struct ubi_vid_hdr;
 
 /*
- * ubi_scan_move_to_list - move a physical eraseblock from the volume tree to a
- * list.
+ * ubi_scan_move_to_list - move a PEB from the volume tree to a list.
  *
  * @sv: volume scanning information
  * @seb: scanning eraseblock infprmation
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index c3185d9fd04..26bb7af9787 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -98,10 +98,11 @@ enum {
  * Compatibility constants used by internal volumes.
  *
  * @UBI_COMPAT_DELETE: delete this internal volume before anything is written
- * to the flash
+ *                     to the flash
  * @UBI_COMPAT_RO: attach this device in read-only mode
  * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its
- * physical eraseblocks, don't allow the wear-leveling unit to move them
+ *                       physical eraseblocks, don't allow the wear-leveling
+ *                       sub-system to move them
  * @UBI_COMPAT_REJECT: reject this UBI image
  */
 enum {
@@ -123,7 +124,7 @@ enum {
  * struct ubi_ec_hdr - UBI erase counter header.
  * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC)
  * @version: version of UBI implementation which is supposed to accept this
- * UBI image
+ *           UBI image
  * @padding1: reserved for future, zeroes
  * @ec: the erase counter
  * @vid_hdr_offset: where the VID header starts
@@ -159,20 +160,20 @@ struct ubi_ec_hdr {
  * struct ubi_vid_hdr - on-flash UBI volume identifier header.
  * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC)
  * @version: UBI implementation version which is supposed to accept this UBI
- * image (%UBI_VERSION)
+ *           image (%UBI_VERSION)
  * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC)
  * @copy_flag: if this logical eraseblock was copied from another physical
- * eraseblock (for wear-leveling reasons)
+ *             eraseblock (for wear-leveling reasons)
  * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE,
- * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
+ *          %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
  * @vol_id: ID of this volume
  * @lnum: logical eraseblock number
  * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be
- * removed, kept only for not breaking older UBI users)
+ *           removed, kept only for not breaking older UBI users)
  * @data_size: how many bytes of data this logical eraseblock contains
  * @used_ebs: total number of used logical eraseblocks in this volume
  * @data_pad: how many bytes at the end of this physical eraseblock are not
- * used
+ *            used
  * @data_crc: CRC checksum of the data stored in this logical eraseblock
  * @padding1: reserved for future, zeroes
  * @sqnum: sequence number
@@ -248,9 +249,9 @@ struct ubi_ec_hdr {
  * The @data_crc field contains the CRC checksum of the contents of the logical
  * eraseblock if this is a static volume. In case of dynamic volumes, it does
  * not contain the CRC checksum as a rule. The only exception is when the
- * data of the physical eraseblock was moved by the wear-leveling unit, then
- * the wear-leveling unit calculates the data CRC and stores it in the
- * @data_crc field. And of course, the @copy_flag is %in this case.
+ * data of the physical eraseblock was moved by the wear-leveling sub-system,
+ * then the wear-leveling sub-system calculates the data CRC and stores it in
+ * the @data_crc field. And of course, the @copy_flag is %in this case.
  *
  * The @data_size field is used only for static volumes because UBI has to know
  * how many bytes of data are stored in this eraseblock. For dynamic volumes,
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 940f6b7deec..1fc32c863b7 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -74,15 +74,15 @@
 #define UBI_IO_RETRIES 3
 
 /*
- * Error codes returned by the I/O unit.
+ * Error codes returned by the I/O sub-system.
  *
  * UBI_IO_PEB_EMPTY: the physical eraseblock is empty, i.e. it contains only
- * 0xFF bytes
+ *                   %0xFF bytes
  * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
- * valid erase counter header, and the rest are %0xFF bytes
+ *                  valid erase counter header, and the rest are %0xFF bytes
  * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC)
  * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or
- * CRC)
+ *                     CRC)
  * UBI_IO_BITFLIPS: bit-flips were detected and corrected
  */
 enum {
@@ -99,9 +99,9 @@ enum {
  * @ec: erase counter
  * @pnum: physical eraseblock number
  *
- * This data structure is used in the WL unit. Each physical eraseblock has a
- * corresponding &struct wl_entry object which may be kept in different
- * RB-trees. See WL unit for details.
+ * This data structure is used in the WL sub-system. Each physical eraseblock
+ * has a corresponding &struct wl_entry object which may be kept in different
+ * RB-trees. See WL sub-system for details.
  */
 struct ubi_wl_entry {
 	struct rb_node rb;
@@ -118,10 +118,10 @@ struct ubi_wl_entry {
  * @mutex: read/write mutex to implement read/write access serialization to
  *         the (@vol_id, @lnum) logical eraseblock
  *
- * This data structure is used in the EBA unit to implement per-LEB locking.
- * When a logical eraseblock is being locked - corresponding
+ * This data structure is used in the EBA sub-system to implement per-LEB
+ * locking. When a logical eraseblock is being locked - corresponding
  * &struct ubi_ltree_entry object is inserted to the lock tree (@ubi->ltree).
- * See EBA unit for details.
+ * See EBA sub-system for details.
  */
 struct ubi_ltree_entry {
 	struct rb_node rb;
@@ -225,7 +225,7 @@ struct ubi_volume {
 #ifdef CONFIG_MTD_UBI_GLUEBI
 	/*
 	 * Gluebi-related stuff may be compiled out.
-	 * TODO: this should not be built into UBI but should be a separate
+	 * Note: this should not be built into UBI but should be a separate
 	 * ubimtd driver which works on top of UBI and emulates MTD devices.
 	 */
 	struct ubi_volume_desc *gluebi_desc;
@@ -235,8 +235,7 @@ struct ubi_volume {
 };
 
 /**
- * struct ubi_volume_desc - descriptor of the UBI volume returned when it is
- * opened.
+ * struct ubi_volume_desc - UBI volume descriptor returned when it is opened.
  * @vol: reference to the corresponding volume description object
  * @mode: open mode (%UBI_READONLY, %UBI_READWRITE, or %UBI_EXCLUSIVE)
  */
@@ -316,11 +315,11 @@ struct ubi_wl_entry;
  * @ro_mode: if the UBI device is in read-only mode
  * @leb_size: logical eraseblock size
  * @leb_start: starting offset of logical eraseblocks within physical
- * eraseblocks
+ *             eraseblocks
  * @ec_hdr_alsize: size of the EC header aligned to @hdrs_min_io_size
  * @vid_hdr_alsize: size of the VID header aligned to @hdrs_min_io_size
  * @vid_hdr_offset: starting offset of the volume identifier header (might be
- * unaligned)
+ *                  unaligned)
  * @vid_hdr_aloffset: starting offset of the VID header aligned to
  * @hdrs_min_io_size
  * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
@@ -356,16 +355,16 @@ struct ubi_device {
 	struct mutex volumes_mutex;
 
 	int max_ec;
-	/* TODO: mean_ec is not updated run-time, fix */
+	/* Note, mean_ec is not updated run-time - should be fixed */
 	int mean_ec;
 
-	/* EBA unit's stuff */
+	/* EBA sub-system's stuff */
 	unsigned long long global_sqnum;
 	spinlock_t ltree_lock;
 	struct rb_root ltree;
 	struct mutex alc_mutex;
 
-	/* Wear-leveling unit's stuff */
+	/* Wear-leveling sub-system's stuff */
 	struct rb_root used;
 	struct rb_root free;
 	struct rb_root scrub;
@@ -388,7 +387,7 @@ struct ubi_device {
 	int thread_enabled;
 	char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2];
 
-	/* I/O unit's stuff */
+	/* I/O sub-system's stuff */
 	long long flash_size;
 	int peb_count;
 	int peb_size;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index cc8fe2934d2..761952ba125 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -19,22 +19,22 @@
  */
 
 /*
- * UBI wear-leveling unit.
+ * UBI wear-leveling sub-system.
  *
- * This unit is responsible for wear-leveling. It works in terms of physical
- * eraseblocks and erase counters and knows nothing about logical eraseblocks,
- * volumes, etc. From this unit's perspective all physical eraseblocks are of
- * two types - used and free. Used physical eraseblocks are those that were
- * "get" by the 'ubi_wl_get_peb()' function, and free physical eraseblocks are
- * those that were put by the 'ubi_wl_put_peb()' function.
+ * This sub-system is responsible for wear-leveling. It works in terms of
+ * physical* eraseblocks and erase counters and knows nothing about logical
+ * eraseblocks, volumes, etc. From this sub-system's perspective all physical
+ * eraseblocks are of two types - used and free. Used physical eraseblocks are
+ * those that were "get" by the 'ubi_wl_get_peb()' function, and free physical
+ * eraseblocks are those that were put by the 'ubi_wl_put_peb()' function.
  *
  * Physical eraseblocks returned by 'ubi_wl_get_peb()' have only erase counter
- * header. The rest of the physical eraseblock contains only 0xFF bytes.
+ * header. The rest of the physical eraseblock contains only %0xFF bytes.
  *
- * When physical eraseblocks are returned to the WL unit by means of the
+ * When physical eraseblocks are returned to the WL sub-system by means of the
  * 'ubi_wl_put_peb()' function, they are scheduled for erasure. The erasure is
  * done asynchronously in context of the per-UBI device background thread,
- * which is also managed by the WL unit.
+ * which is also managed by the WL sub-system.
  *
  * The wear-leveling is ensured by means of moving the contents of used
  * physical eraseblocks with low erase counter to free physical eraseblocks
@@ -43,34 +43,36 @@
  * The 'ubi_wl_get_peb()' function accepts data type hints which help to pick
  * an "optimal" physical eraseblock. For example, when it is known that the
  * physical eraseblock will be "put" soon because it contains short-term data,
- * the WL unit may pick a free physical eraseblock with low erase counter, and
- * so forth.
+ * the WL sub-system may pick a free physical eraseblock with low erase
+ * counter, and so forth.
  *
- * If the WL unit fails to erase a physical eraseblock, it marks it as bad.
+ * If the WL sub-system fails to erase a physical eraseblock, it marks it as
+ * bad.
  *
- * This unit is also responsible for scrubbing. If a bit-flip is detected in a
- * physical eraseblock, it has to be moved. Technically this is the same as
- * moving it for wear-leveling reasons.
+ * This sub-system is also responsible for scrubbing. If a bit-flip is detected
+ * in a physical eraseblock, it has to be moved. Technically this is the same
+ * as moving it for wear-leveling reasons.
  *
- * As it was said, for the UBI unit all physical eraseblocks are either "free"
- * or "used". Free eraseblock are kept in the @wl->free RB-tree, while used
- * eraseblocks are kept in a set of different RB-trees: @wl->used,
+ * As it was said, for the UBI sub-system all physical eraseblocks are either
+ * "free" or "used". Free eraseblock are kept in the @wl->free RB-tree, while
+ * used eraseblocks are kept in a set of different RB-trees: @wl->used,
  * @wl->prot.pnum, @wl->prot.aec, and @wl->scrub.
  *
  * Note, in this implementation, we keep a small in-RAM object for each physical
  * eraseblock. This is surely not a scalable solution. But it appears to be good
  * enough for moderately large flashes and it is simple. In future, one may
- * re-work this unit and make it more scalable.
+ * re-work this sub-system and make it more scalable.
  *
- * At the moment this unit does not utilize the sequence number, which was
- * introduced relatively recently. But it would be wise to do this because the
- * sequence number of a logical eraseblock characterizes how old is it. For
+ * At the moment this sub-system does not utilize the sequence number, which
+ * was introduced relatively recently. But it would be wise to do this because
+ * the sequence number of a logical eraseblock characterizes how old is it. For
  * example, when we move a PEB with low erase counter, and we need to pick the
  * target PEB, we pick a PEB with the highest EC if our PEB is "old" and we
  * pick target PEB with an average EC if our PEB is not very "old". This is a
- * room for future re-works of the WL unit.
+ * room for future re-works of the WL sub-system.
  *
- * FIXME: looks too complex, should be simplified (later).
+ * Note: the stuff with protection trees looks too complex and is difficult to
+ * understand. Should be fixed.
  */
 
 #include <linux/slab.h>
@@ -92,20 +94,21 @@
 
 /*
  * Maximum difference between two erase counters. If this threshold is
- * exceeded, the WL unit starts moving data from used physical eraseblocks with
- * low erase counter to free physical eraseblocks with high erase counter.
+ * exceeded, the WL sub-system starts moving data from used physical
+ * eraseblocks with low erase counter to free physical eraseblocks with high
+ * erase counter.
  */
 #define UBI_WL_THRESHOLD CONFIG_MTD_UBI_WL_THRESHOLD
 
 /*
- * When a physical eraseblock is moved, the WL unit has to pick the target
+ * When a physical eraseblock is moved, the WL sub-system has to pick the target
  * physical eraseblock to move to. The simplest way would be just to pick the
  * one with the highest erase counter. But in certain workloads this could lead
  * to an unlimited wear of one or few physical eraseblock. Indeed, imagine a
  * situation when the picked physical eraseblock is constantly erased after the
  * data is written to it. So, we have a constant which limits the highest erase
- * counter of the free physical eraseblock to pick. Namely, the WL unit does
- * not pick eraseblocks with erase counter greater then the lowest erase
+ * counter of the free physical eraseblock to pick. Namely, the WL sub-system
+ * does not pick eraseblocks with erase counter greater then the lowest erase
  * counter plus %WL_FREE_MAX_DIFF.
  */
 #define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -123,11 +126,11 @@
  * @abs_ec: the absolute erase counter value when the protection ends
  * @e: the wear-leveling entry of the physical eraseblock under protection
  *
- * When the WL unit returns a physical eraseblock, the physical eraseblock is
- * protected from being moved for some "time". For this reason, the physical
- * eraseblock is not directly moved from the @wl->free tree to the @wl->used
- * tree. There is one more tree in between where this physical eraseblock is
- * temporarily stored (@wl->prot).
+ * When the WL sub-system returns a physical eraseblock, the physical
+ * eraseblock is protected from being moved for some "time". For this reason,
+ * the physical eraseblock is not directly moved from the @wl->free tree to the
+ * @wl->used tree. There is one more tree in between where this physical
+ * eraseblock is temporarily stored (@wl->prot).
  *
  * All this protection stuff is needed because:
  *  o we don't want to move physical eraseblocks just after we have given them
@@ -175,7 +178,6 @@ struct ubi_wl_prot_entry {
  * @list: a link in the list of pending works
  * @func: worker function
  * @priv: private data of the worker function
- *
  * @e: physical eraseblock to erase
  * @torture: if the physical eraseblock has to be tortured
  *
@@ -1136,7 +1138,7 @@ out_ro:
 }
 
 /**
- * ubi_wl_put_peb - return a physical eraseblock to the wear-leveling unit.
+ * ubi_wl_put_peb - return a PEB to the wear-leveling sub-system.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock to return
  * @torture: if this physical eraseblock has to be tortured
@@ -1175,11 +1177,11 @@ retry:
 		/*
 		 * User is putting the physical eraseblock which was selected
 		 * as the target the data is moved to. It may happen if the EBA
-		 * unit already re-mapped the LEB in 'ubi_eba_copy_leb()' but
-		 * the WL unit has not put the PEB to the "used" tree yet, but
-		 * it is about to do this. So we just set a flag which will
-		 * tell the WL worker that the PEB is not needed anymore and
-		 * should be scheduled for erasure.
+		 * sub-system already re-mapped the LEB in 'ubi_eba_copy_leb()'
+		 * but the WL sub-system has not put the PEB to the "used" tree
+		 * yet, but it is about to do this. So we just set a flag which
+		 * will tell the WL worker that the PEB is not needed anymore
+		 * and should be scheduled for erasure.
 		 */
 		dbg_wl("PEB %d is the target of data moving", pnum);
 		ubi_assert(!ubi->move_to_put);
@@ -1425,8 +1427,7 @@ static void cancel_pending(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_init_scan - initialize the wear-leveling unit using scanning
- * information.
+ * ubi_wl_init_scan - initialize the WL sub-system using scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  *
@@ -1583,13 +1584,12 @@ static void protection_trees_destroy(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_close - close the wear-leveling unit.
+ * ubi_wl_close - close the wear-leveling sub-system.
  * @ubi: UBI device description object
  */
 void ubi_wl_close(struct ubi_device *ubi)
 {
-	dbg_wl("close the UBI wear-leveling unit");
-
+	dbg_wl("close the WL sub-system");
 	cancel_pending(ubi);
 	protection_trees_destroy(ubi);
 	tree_destroy(&ubi->used);
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
index 83302bbbddb..6316fafe5c2 100644
--- a/include/linux/mtd/ubi.h
+++ b/include/linux/mtd/ubi.h
@@ -45,13 +45,13 @@ enum {
  * @size: how many physical eraseblocks are reserved for this volume
  * @used_bytes: how many bytes of data this volume contains
  * @used_ebs: how many physical eraseblocks of this volume actually contain any
- * data
+ *            data
  * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
  * @corrupted: non-zero if the volume is corrupted (static volumes only)
  * @upd_marker: non-zero if the volume has update marker set
  * @alignment: volume alignment
  * @usable_leb_size: how many bytes are available in logical eraseblocks of
- * this volume
+ *                   this volume
  * @name_len: volume name length
  * @name: volume name
  * @cdev: UBI volume character device major and minor numbers
-- 
cgit v1.2.3


From c8566350a3229ca505b84313c65d1403b4d0cbfc Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 16 Jul 2008 17:40:22 +0300
Subject: UBI: fix and re-work debugging stuff

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c  |   2 +-
 drivers/mtd/ubi/cdev.c   |  26 ++++----
 drivers/mtd/ubi/debug.c  | 160 +++++++++++++++++++++++++----------------------
 drivers/mtd/ubi/debug.h  |  68 +++++++++++++-------
 drivers/mtd/ubi/gluebi.c |  10 +--
 drivers/mtd/ubi/io.c     |   4 +-
 drivers/mtd/ubi/kapi.c   |  20 +++---
 drivers/mtd/ubi/scan.c   |   2 +-
 drivers/mtd/ubi/upd.c    |  16 ++---
 drivers/mtd/ubi/vmt.c    |  73 ++++++++++-----------
 drivers/mtd/ubi/vtbl.c   |   2 +-
 11 files changed, 206 insertions(+), 177 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 27271fe32e0..7210e1da1fc 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -403,7 +403,7 @@ static int uif_init(struct ubi_device *ubi)
 
 	ubi_assert(MINOR(dev) == 0);
 	cdev_init(&ubi->cdev, &ubi_cdev_operations);
-	dbg_msg("%s major is %u", ubi->ubi_name, MAJOR(dev));
+	dbg_gen("%s major is %u", ubi->ubi_name, MAJOR(dev));
 	ubi->cdev.owner = THIS_MODULE;
 
 	err = cdev_add(&ubi->cdev, dev, 1);
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 4fb84e3e650..7c19918cc91 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -116,7 +116,7 @@ static int vol_cdev_open(struct inode *inode, struct file *file)
 	else
 		mode = UBI_READONLY;
 
-	dbg_msg("open volume %d, mode %d", vol_id, mode);
+	dbg_gen("open volume %d, mode %d", vol_id, mode);
 
 	desc = ubi_open_volume(ubi_num, vol_id, mode);
 	unlock_kernel();
@@ -132,7 +132,7 @@ static int vol_cdev_release(struct inode *inode, struct file *file)
 	struct ubi_volume_desc *desc = file->private_data;
 	struct ubi_volume *vol = desc->vol;
 
-	dbg_msg("release volume %d, mode %d", vol->vol_id, desc->mode);
+	dbg_gen("release volume %d, mode %d", vol->vol_id, desc->mode);
 
 	if (vol->updating) {
 		ubi_warn("update of volume %d not finished, volume is damaged",
@@ -141,7 +141,7 @@ static int vol_cdev_release(struct inode *inode, struct file *file)
 		vol->updating = 0;
 		vfree(vol->upd_buf);
 	} else if (vol->changing_leb) {
-		dbg_msg("only %lld of %lld bytes received for atomic LEB change"
+		dbg_gen("only %lld of %lld bytes received for atomic LEB change"
 			" for volume %d:%d, cancel", vol->upd_received,
 			vol->upd_bytes, vol->ubi->ubi_num, vol->vol_id);
 		vol->changing_leb = 0;
@@ -183,7 +183,7 @@ static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
 		return -EINVAL;
 	}
 
-	dbg_msg("seek volume %d, offset %lld, origin %d, new offset %lld",
+	dbg_gen("seek volume %d, offset %lld, origin %d, new offset %lld",
 		vol->vol_id, offset, origin, new_offset);
 
 	file->f_pos = new_offset;
@@ -201,7 +201,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 	void *tbuf;
 	uint64_t tmp;
 
-	dbg_msg("read %zd bytes from offset %lld of volume %d",
+	dbg_gen("read %zd bytes from offset %lld of volume %d",
 		count, *offp, vol->vol_id);
 
 	if (vol->updating) {
@@ -216,7 +216,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 		return 0;
 
 	if (vol->corrupted)
-		dbg_msg("read from corrupted volume %d", vol->vol_id);
+		dbg_gen("read from corrupted volume %d", vol->vol_id);
 
 	if (*offp + count > vol->used_bytes)
 		count_save = count = vol->used_bytes - *offp;
@@ -285,7 +285,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 	char *tbuf;
 	uint64_t tmp;
 
-	dbg_msg("requested: write %zd bytes to offset %lld of volume %u",
+	dbg_gen("requested: write %zd bytes to offset %lld of volume %u",
 		count, *offp, vol->vol_id);
 
 	if (vol->vol_type == UBI_STATIC_VOLUME)
@@ -514,7 +514,7 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
 			break;
 		}
 
-		dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
+		dbg_gen("erase LEB %d:%d", vol->vol_id, lnum);
 		err = ubi_eba_unmap_leb(ubi, vol, lnum);
 		if (err)
 			break;
@@ -626,7 +626,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 	{
 		struct ubi_mkvol_req req;
 
-		dbg_msg("create volume");
+		dbg_gen("create volume");
 		err = copy_from_user(&req, argp, sizeof(struct ubi_mkvol_req));
 		if (err) {
 			err = -EFAULT;
@@ -656,7 +656,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 	{
 		int vol_id;
 
-		dbg_msg("remove volume");
+		dbg_gen("remove volume");
 		err = get_user(vol_id, (__user int32_t *)argp);
 		if (err) {
 			err = -EFAULT;
@@ -689,7 +689,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 		uint64_t tmp;
 		struct ubi_rsvol_req req;
 
-		dbg_msg("re-size volume");
+		dbg_gen("re-size volume");
 		err = copy_from_user(&req, argp, sizeof(struct ubi_rsvol_req));
 		if (err) {
 			err = -EFAULT;
@@ -742,7 +742,7 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file,
 		struct ubi_attach_req req;
 		struct mtd_info *mtd;
 
-		dbg_msg("attach MTD device");
+		dbg_gen("attach MTD device");
 		err = copy_from_user(&req, argp, sizeof(struct ubi_attach_req));
 		if (err) {
 			err = -EFAULT;
@@ -782,7 +782,7 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file,
 	{
 		int ubi_num;
 
-		dbg_msg("dettach MTD device");
+		dbg_gen("dettach MTD device");
 		err = get_user(ubi_num, (__user int32_t *)argp);
 		if (err) {
 			err = -EFAULT;
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index 56956ec2845..21e0d7d76a4 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -24,7 +24,7 @@
  * changes.
  */
 
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG
+#ifdef CONFIG_MTD_UBI_DEBUG
 
 #include "ubi.h"
 
@@ -34,14 +34,19 @@
  */
 void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
 {
-	dbg_msg("erase counter header dump:");
-	dbg_msg("magic          %#08x", be32_to_cpu(ec_hdr->magic));
-	dbg_msg("version        %d",    (int)ec_hdr->version);
-	dbg_msg("ec             %llu",  (long long)be64_to_cpu(ec_hdr->ec));
-	dbg_msg("vid_hdr_offset %d",    be32_to_cpu(ec_hdr->vid_hdr_offset));
-	dbg_msg("data_offset    %d",    be32_to_cpu(ec_hdr->data_offset));
-	dbg_msg("hdr_crc        %#08x", be32_to_cpu(ec_hdr->hdr_crc));
-	dbg_msg("erase counter header hexdump:");
+	printk(KERN_DEBUG "Erase counter header dump:\n");
+	printk(KERN_DEBUG "\tmagic          %#08x\n",
+	       be32_to_cpu(ec_hdr->magic));
+	printk(KERN_DEBUG "\tversion        %d\n", (int)ec_hdr->version);
+	printk(KERN_DEBUG "\tec             %llu\n",
+	       (long long)be64_to_cpu(ec_hdr->ec));
+	printk(KERN_DEBUG "\tvid_hdr_offset %d\n",
+	       be32_to_cpu(ec_hdr->vid_hdr_offset));
+	printk(KERN_DEBUG "\tdata_offset    %d\n",
+	       be32_to_cpu(ec_hdr->data_offset));
+	printk(KERN_DEBUG "\thdr_crc        %#08x\n",
+	       be32_to_cpu(ec_hdr->hdr_crc));
+	printk(KERN_DEBUG "erase counter header hexdump:\n");
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 		       ec_hdr, UBI_EC_HDR_SIZE, 1);
 }
@@ -52,22 +57,24 @@ void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
  */
 void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
 {
-	dbg_msg("volume identifier header dump:");
-	dbg_msg("magic     %08x", be32_to_cpu(vid_hdr->magic));
-	dbg_msg("version   %d",   (int)vid_hdr->version);
-	dbg_msg("vol_type  %d",   (int)vid_hdr->vol_type);
-	dbg_msg("copy_flag %d",   (int)vid_hdr->copy_flag);
-	dbg_msg("compat    %d",   (int)vid_hdr->compat);
-	dbg_msg("vol_id    %d",   be32_to_cpu(vid_hdr->vol_id));
-	dbg_msg("lnum      %d",   be32_to_cpu(vid_hdr->lnum));
-	dbg_msg("leb_ver   %u",   be32_to_cpu(vid_hdr->leb_ver));
-	dbg_msg("data_size %d",   be32_to_cpu(vid_hdr->data_size));
-	dbg_msg("used_ebs  %d",   be32_to_cpu(vid_hdr->used_ebs));
-	dbg_msg("data_pad  %d",   be32_to_cpu(vid_hdr->data_pad));
-	dbg_msg("sqnum     %llu",
+	printk(KERN_DEBUG "Volume identifier header dump:\n");
+	printk(KERN_DEBUG "\tmagic     %08x\n", be32_to_cpu(vid_hdr->magic));
+	printk(KERN_DEBUG "\tversion   %d\n",   (int)vid_hdr->version);
+	printk(KERN_DEBUG "\tvol_type  %d\n",   (int)vid_hdr->vol_type);
+	printk(KERN_DEBUG "\tcopy_flag %d\n",   (int)vid_hdr->copy_flag);
+	printk(KERN_DEBUG "\tcompat    %d\n",   (int)vid_hdr->compat);
+	printk(KERN_DEBUG "\tvol_id    %d\n",   be32_to_cpu(vid_hdr->vol_id));
+	printk(KERN_DEBUG "\tlnum      %d\n",   be32_to_cpu(vid_hdr->lnum));
+	printk(KERN_DEBUG "\tleb_ver   %u\n",   be32_to_cpu(vid_hdr->leb_ver));
+	printk(KERN_DEBUG "\tdata_size %d\n",   be32_to_cpu(vid_hdr->data_size));
+	printk(KERN_DEBUG "\tused_ebs  %d\n",   be32_to_cpu(vid_hdr->used_ebs));
+	printk(KERN_DEBUG "\tdata_pad  %d\n",   be32_to_cpu(vid_hdr->data_pad));
+	printk(KERN_DEBUG "\tsqnum     %llu\n",
 		(unsigned long long)be64_to_cpu(vid_hdr->sqnum));
-	dbg_msg("hdr_crc   %08x", be32_to_cpu(vid_hdr->hdr_crc));
-	dbg_msg("volume identifier header hexdump:");
+	printk(KERN_DEBUG "\thdr_crc   %08x\n", be32_to_cpu(vid_hdr->hdr_crc));
+	printk(KERN_DEBUG "Volume identifier header hexdump:\n");
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
+		       vid_hdr, UBI_VID_HDR_SIZE, 1);
 }
 
 /**
@@ -76,27 +83,27 @@ void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
  */
 void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
 {
-	dbg_msg("volume information dump:");
-	dbg_msg("vol_id          %d", vol->vol_id);
-	dbg_msg("reserved_pebs   %d", vol->reserved_pebs);
-	dbg_msg("alignment       %d", vol->alignment);
-	dbg_msg("data_pad        %d", vol->data_pad);
-	dbg_msg("vol_type        %d", vol->vol_type);
-	dbg_msg("name_len        %d", vol->name_len);
-	dbg_msg("usable_leb_size %d", vol->usable_leb_size);
-	dbg_msg("used_ebs        %d", vol->used_ebs);
-	dbg_msg("used_bytes      %lld", vol->used_bytes);
-	dbg_msg("last_eb_bytes   %d", vol->last_eb_bytes);
-	dbg_msg("corrupted       %d", vol->corrupted);
-	dbg_msg("upd_marker      %d", vol->upd_marker);
+	printk(KERN_DEBUG "Volume information dump:\n");
+	printk(KERN_DEBUG "\tvol_id          %d\n", vol->vol_id);
+	printk(KERN_DEBUG "\treserved_pebs   %d\n", vol->reserved_pebs);
+	printk(KERN_DEBUG "\talignment       %d\n", vol->alignment);
+	printk(KERN_DEBUG "\tdata_pad        %d\n", vol->data_pad);
+	printk(KERN_DEBUG "\tvol_type        %d\n", vol->vol_type);
+	printk(KERN_DEBUG "\tname_len        %d\n", vol->name_len);
+	printk(KERN_DEBUG "\tusable_leb_size %d\n", vol->usable_leb_size);
+	printk(KERN_DEBUG "\tused_ebs        %d\n", vol->used_ebs);
+	printk(KERN_DEBUG "\tused_bytes      %lld\n", vol->used_bytes);
+	printk(KERN_DEBUG "\tlast_eb_bytes   %d\n", vol->last_eb_bytes);
+	printk(KERN_DEBUG "\tcorrupted       %d\n", vol->corrupted);
+	printk(KERN_DEBUG "\tupd_marker      %d\n", vol->upd_marker);
 
 	if (vol->name_len <= UBI_VOL_NAME_MAX &&
 	    strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
-		dbg_msg("name            %s", vol->name);
+		printk(KERN_DEBUG "\tname            %s\n", vol->name);
 	} else {
-		dbg_msg("the 1st 5 characters of the name: %c%c%c%c%c",
-			vol->name[0], vol->name[1], vol->name[2],
-			vol->name[3], vol->name[4]);
+		printk(KERN_DEBUG "\t1st 5 characters of name: %c%c%c%c%c\n",
+		       vol->name[0], vol->name[1], vol->name[2],
+		       vol->name[3], vol->name[4]);
 	}
 }
 
@@ -109,28 +116,29 @@ void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
 {
 	int name_len = be16_to_cpu(r->name_len);
 
-	dbg_msg("volume table record %d dump:", idx);
-	dbg_msg("reserved_pebs   %d", be32_to_cpu(r->reserved_pebs));
-	dbg_msg("alignment       %d", be32_to_cpu(r->alignment));
-	dbg_msg("data_pad        %d", be32_to_cpu(r->data_pad));
-	dbg_msg("vol_type        %d", (int)r->vol_type);
-	dbg_msg("upd_marker      %d", (int)r->upd_marker);
-	dbg_msg("name_len        %d", name_len);
+	printk(KERN_DEBUG "Volume table record %d dump:\n", idx);
+	printk(KERN_DEBUG "\treserved_pebs   %d\n",
+	       be32_to_cpu(r->reserved_pebs));
+	printk(KERN_DEBUG "\talignment       %d\n", be32_to_cpu(r->alignment));
+	printk(KERN_DEBUG "\tdata_pad        %d\n", be32_to_cpu(r->data_pad));
+	printk(KERN_DEBUG "\tvol_type        %d\n", (int)r->vol_type);
+	printk(KERN_DEBUG "\tupd_marker      %d\n", (int)r->upd_marker);
+	printk(KERN_DEBUG "\tname_len        %d\n", name_len);
 
 	if (r->name[0] == '\0') {
-		dbg_msg("name            NULL");
+		printk(KERN_DEBUG "\tname            NULL\n");
 		return;
 	}
 
 	if (name_len <= UBI_VOL_NAME_MAX &&
 	    strnlen(&r->name[0], name_len + 1) == name_len) {
-		dbg_msg("name            %s", &r->name[0]);
+		printk(KERN_DEBUG "\tname            %s\n", &r->name[0]);
 	} else {
-		dbg_msg("1st 5 characters of the name: %c%c%c%c%c",
+		printk(KERN_DEBUG "\t1st 5 characters of name: %c%c%c%c%c\n",
 			r->name[0], r->name[1], r->name[2], r->name[3],
 			r->name[4]);
 	}
-	dbg_msg("crc             %#08x", be32_to_cpu(r->crc));
+	printk(KERN_DEBUG "\tcrc             %#08x\n", be32_to_cpu(r->crc));
 }
 
 /**
@@ -139,15 +147,15 @@ void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
  */
 void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
 {
-	dbg_msg("volume scanning information dump:");
-	dbg_msg("vol_id         %d", sv->vol_id);
-	dbg_msg("highest_lnum   %d", sv->highest_lnum);
-	dbg_msg("leb_count      %d", sv->leb_count);
-	dbg_msg("compat         %d", sv->compat);
-	dbg_msg("vol_type       %d", sv->vol_type);
-	dbg_msg("used_ebs       %d", sv->used_ebs);
-	dbg_msg("last_data_size %d", sv->last_data_size);
-	dbg_msg("data_pad       %d", sv->data_pad);
+	printk(KERN_DEBUG "Volume scanning information dump:\n");
+	printk(KERN_DEBUG "\tvol_id         %d\n", sv->vol_id);
+	printk(KERN_DEBUG "\thighest_lnum   %d\n", sv->highest_lnum);
+	printk(KERN_DEBUG "\tleb_count      %d\n", sv->leb_count);
+	printk(KERN_DEBUG "\tcompat         %d\n", sv->compat);
+	printk(KERN_DEBUG "\tvol_type       %d\n", sv->vol_type);
+	printk(KERN_DEBUG "\tused_ebs       %d\n", sv->used_ebs);
+	printk(KERN_DEBUG "\tlast_data_size %d\n", sv->last_data_size);
+	printk(KERN_DEBUG "\tdata_pad       %d\n", sv->data_pad);
 }
 
 /**
@@ -157,14 +165,14 @@ void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
  */
 void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type)
 {
-	dbg_msg("eraseblock scanning information dump:");
-	dbg_msg("ec       %d", seb->ec);
-	dbg_msg("pnum     %d", seb->pnum);
+	printk(KERN_DEBUG "eraseblock scanning information dump:\n");
+	printk(KERN_DEBUG "\tec       %d\n", seb->ec);
+	printk(KERN_DEBUG "\tpnum     %d\n", seb->pnum);
 	if (type == 0) {
-		dbg_msg("lnum     %d", seb->lnum);
-		dbg_msg("scrub    %d", seb->scrub);
-		dbg_msg("sqnum    %llu", seb->sqnum);
-		dbg_msg("leb_ver  %u", seb->leb_ver);
+		printk(KERN_DEBUG "\tlnum     %d\n", seb->lnum);
+		printk(KERN_DEBUG "\tscrub    %d\n", seb->scrub);
+		printk(KERN_DEBUG "\tsqnum    %llu\n", seb->sqnum);
+		printk(KERN_DEBUG "\tleb_ver  %u\n", seb->leb_ver);
 	}
 }
 
@@ -176,16 +184,16 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
 {
 	char nm[17];
 
-	dbg_msg("volume creation request dump:");
-	dbg_msg("vol_id    %d",   req->vol_id);
-	dbg_msg("alignment %d",   req->alignment);
-	dbg_msg("bytes     %lld", (long long)req->bytes);
-	dbg_msg("vol_type  %d",   req->vol_type);
-	dbg_msg("name_len  %d",   req->name_len);
+	printk(KERN_DEBUG "Volume creation request dump:\n");
+	printk(KERN_DEBUG "\tvol_id    %d\n",   req->vol_id);
+	printk(KERN_DEBUG "\talignment %d\n",   req->alignment);
+	printk(KERN_DEBUG "\tbytes     %lld\n", (long long)req->bytes);
+	printk(KERN_DEBUG "\tvol_type  %d\n",   req->vol_type);
+	printk(KERN_DEBUG "\tname_len  %d\n",   req->name_len);
 
 	memcpy(nm, req->name, 16);
 	nm[16] = 0;
-	dbg_msg("the 1st 16 characters of the name: %s", nm);
+	printk(KERN_DEBUG "\t1st 16 characters of name: %s\n", nm);
 }
 
-#endif /* CONFIG_MTD_UBI_DEBUG_MSG */
+#endif /* CONFIG_MTD_UBI_DEBUG */
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 7d8d77c31df..78e914d23ec 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -24,21 +24,16 @@
 #ifdef CONFIG_MTD_UBI_DEBUG
 #include <linux/random.h>
 
-#define ubi_assert(expr)  BUG_ON(!(expr))
 #define dbg_err(fmt, ...) ubi_err(fmt, ##__VA_ARGS__)
-#else
-#define ubi_assert(expr)  ({})
-#define dbg_err(fmt, ...) ({})
-#endif
 
-#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
-#define DBG_DISABLE_BGT 1
-#else
-#define DBG_DISABLE_BGT 0
-#endif
+#define ubi_assert(expr)  do {                                               \
+        if (unlikely(!(expr))) {                                             \
+                printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \
+                       __func__, __LINE__, current->pid);                    \
+                ubi_dbg_dump_stack();                                        \
+        }                                                                    \
+} while (0)
 
-#ifdef CONFIG_MTD_UBI_DEBUG_MSG
-/* Generic debugging message */
 #define dbg_msg(fmt, ...)                                    \
 	printk(KERN_DEBUG "UBI DBG (pid %d): %s: " fmt "\n", \
 	       current->pid, __func__, ##__VA_ARGS__)
@@ -61,19 +56,12 @@ void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv);
 void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type);
 void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
 
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG
+/* General debugging messages */
+#define dbg_gen(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
 #else
-
-#define dbg_msg(fmt, ...)    ({})
-#define ubi_dbg_dump_stack() ({})
-#define ubi_dbg_dump_ec_hdr(ec_hdr)      ({})
-#define ubi_dbg_dump_vid_hdr(vid_hdr)    ({})
-#define ubi_dbg_dump_vol_info(vol)       ({})
-#define ubi_dbg_dump_vtbl_record(r, idx) ({})
-#define ubi_dbg_dump_sv(sv)              ({})
-#define ubi_dbg_dump_seb(seb, type)      ({})
-#define ubi_dbg_dump_mkvol_req(req)      ({})
-
-#endif /* CONFIG_MTD_UBI_DEBUG_MSG */
+#define dbg_gen(fmt, ...) ({})
+#endif
 
 #ifdef CONFIG_MTD_UBI_DEBUG_MSG_EBA
 /* Messages from the eraseblock association sub-system */
@@ -105,6 +93,12 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
 #define UBI_IO_DEBUG 0
 #endif
 
+#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
+#define DBG_DISABLE_BGT 1
+#else
+#define DBG_DISABLE_BGT 0
+#endif
+
 #ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS
 /**
  * ubi_dbg_is_bitflip - if it is time to emulate a bit-flip.
@@ -149,4 +143,30 @@ static inline int ubi_dbg_is_erase_failure(void)
 #define ubi_dbg_is_erase_failure() 0
 #endif
 
+#else
+
+#define ubi_assert(expr)                 ({})
+#define dbg_err(fmt, ...)                ({})
+#define dbg_msg(fmt, ...)                ({})
+#define dbg_gen(fmt, ...)                ({})
+#define dbg_eba(fmt, ...)                ({})
+#define dbg_wl(fmt, ...)                 ({})
+#define dbg_io(fmt, ...)                 ({})
+#define dbg_bld(fmt, ...)                ({})
+#define ubi_dbg_dump_stack()             ({})
+#define ubi_dbg_dump_ec_hdr(ec_hdr)      ({})
+#define ubi_dbg_dump_vid_hdr(vid_hdr)    ({})
+#define ubi_dbg_dump_vol_info(vol)       ({})
+#define ubi_dbg_dump_vtbl_record(r, idx) ({})
+#define ubi_dbg_dump_sv(sv)              ({})
+#define ubi_dbg_dump_seb(seb, type)      ({})
+#define ubi_dbg_dump_mkvol_req(req)      ({})
+
+#define UBI_IO_DEBUG               0
+#define DBG_DISABLE_BGT            0
+#define ubi_dbg_is_bitflip()       0
+#define ubi_dbg_is_write_failure() 0
+#define ubi_dbg_is_erase_failure() 0
+
+#endif /* !CONFIG_MTD_UBI_DEBUG */
 #endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index ae76ab638b2..49f52dceea9 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -111,7 +111,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
 	struct ubi_device *ubi;
 	uint64_t tmp = from;
 
-	dbg_msg("read %zd bytes from offset %lld", len, from);
+	dbg_gen("read %zd bytes from offset %lld", len, from);
 
 	if (len < 0 || from < 0 || from + len > mtd->size)
 		return -EINVAL;
@@ -162,7 +162,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct ubi_device *ubi;
 	uint64_t tmp = to;
 
-	dbg_msg("write %zd bytes to offset %lld", len, to);
+	dbg_gen("write %zd bytes to offset %lld", len, to);
 
 	if (len < 0 || to < 0 || len + to > mtd->size)
 		return -EINVAL;
@@ -215,7 +215,7 @@ static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr)
 	struct ubi_volume *vol;
 	struct ubi_device *ubi;
 
-	dbg_msg("erase %u bytes at offset %u", instr->len, instr->addr);
+	dbg_gen("erase %u bytes at offset %u", instr->len, instr->addr);
 
 	if (instr->addr < 0 || instr->addr > mtd->size - mtd->erasesize)
 		return -EINVAL;
@@ -304,7 +304,7 @@ int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol)
 		return -ENFILE;
 	}
 
-	dbg_msg("added mtd%d (\"%s\"), size %u, EB size %u",
+	dbg_gen("added mtd%d (\"%s\"), size %u, EB size %u",
 		mtd->index, mtd->name, mtd->size, mtd->erasesize);
 	return 0;
 }
@@ -322,7 +322,7 @@ int ubi_destroy_gluebi(struct ubi_volume *vol)
 	int err;
 	struct mtd_info *mtd = &vol->gluebi_mtd;
 
-	dbg_msg("remove mtd%d", mtd->index);
+	dbg_gen("remove mtd%d", mtd->index);
 	err = del_mtd_device(mtd);
 	if (err)
 		return err;
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 561e7b2f96c..27b9c2c2fc6 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -187,7 +187,7 @@ retry:
 		ubi_assert(len == read);
 
 		if (ubi_dbg_is_bitflip()) {
-			dbg_msg("bit-flip (emulated)");
+			dbg_gen("bit-flip (emulated)");
 			err = UBI_IO_BITFLIPS;
 		}
 	}
@@ -1256,7 +1256,7 @@ static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
 
 fail:
 	ubi_err("paranoid check failed for PEB %d", pnum);
-	dbg_msg("hex dump of the %d-%d region", offset, offset + len);
+	ubi_msg("hex dump of the %d-%d region", offset, offset + len);
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 		       ubi->dbg_peb_buf, len, 1);
 	err = 1;
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index e65c8e0bcd5..5d9bcf109c1 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -106,7 +106,7 @@ struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode)
 	struct ubi_device *ubi;
 	struct ubi_volume *vol;
 
-	dbg_msg("open device %d volume %d, mode %d", ubi_num, vol_id, mode);
+	dbg_gen("open device %d volume %d, mode %d", ubi_num, vol_id, mode);
 
 	if (ubi_num < 0 || ubi_num >= UBI_MAX_DEVICES)
 		return ERR_PTR(-EINVAL);
@@ -215,7 +215,7 @@ struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
 	struct ubi_device *ubi;
 	struct ubi_volume_desc *ret;
 
-	dbg_msg("open volume %s, mode %d", name, mode);
+	dbg_gen("open volume %s, mode %d", name, mode);
 
 	if (!name)
 		return ERR_PTR(-EINVAL);
@@ -266,7 +266,7 @@ void ubi_close_volume(struct ubi_volume_desc *desc)
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 
-	dbg_msg("close volume %d, mode %d", vol->vol_id, desc->mode);
+	dbg_gen("close volume %d, mode %d", vol->vol_id, desc->mode);
 
 	spin_lock(&ubi->volumes_lock);
 	switch (desc->mode) {
@@ -323,7 +323,7 @@ int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
 	struct ubi_device *ubi = vol->ubi;
 	int err, vol_id = vol->vol_id;
 
-	dbg_msg("read %d bytes from LEB %d:%d:%d", len, vol_id, lnum, offset);
+	dbg_gen("read %d bytes from LEB %d:%d:%d", len, vol_id, lnum, offset);
 
 	if (vol_id < 0 || vol_id >= ubi->vtbl_slots || lnum < 0 ||
 	    lnum >= vol->used_ebs || offset < 0 || len < 0 ||
@@ -388,7 +388,7 @@ int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	struct ubi_device *ubi = vol->ubi;
 	int vol_id = vol->vol_id;
 
-	dbg_msg("write %d bytes to LEB %d:%d:%d", len, vol_id, lnum, offset);
+	dbg_gen("write %d bytes to LEB %d:%d:%d", len, vol_id, lnum, offset);
 
 	if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
 		return -EINVAL;
@@ -438,7 +438,7 @@ int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	struct ubi_device *ubi = vol->ubi;
 	int vol_id = vol->vol_id;
 
-	dbg_msg("atomically write %d bytes to LEB %d:%d", len, vol_id, lnum);
+	dbg_gen("atomically write %d bytes to LEB %d:%d", len, vol_id, lnum);
 
 	if (vol_id < 0 || vol_id >= ubi->vtbl_slots)
 		return -EINVAL;
@@ -482,7 +482,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum)
 	struct ubi_device *ubi = vol->ubi;
 	int err;
 
-	dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("erase LEB %d:%d", vol->vol_id, lnum);
 
 	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
@@ -542,7 +542,7 @@ int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum)
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 
-	dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("unmap LEB %d:%d", vol->vol_id, lnum);
 
 	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
@@ -579,7 +579,7 @@ int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
 
-	dbg_msg("unmap LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("unmap LEB %d:%d", vol->vol_id, lnum);
 
 	if (desc->mode == UBI_READONLY || vol->vol_type == UBI_STATIC_VOLUME)
 		return -EROFS;
@@ -621,7 +621,7 @@ int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum)
 {
 	struct ubi_volume *vol = desc->vol;
 
-	dbg_msg("test LEB %d:%d", vol->vol_id, lnum);
+	dbg_gen("test LEB %d:%d", vol->vol_id, lnum);
 
 	if (lnum < 0 || lnum >= vol->reserved_pebs)
 		return -EINVAL;
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 892c2ba4977..40eca9ce5fa 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -932,7 +932,7 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
 	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
 		cond_resched();
 
-		dbg_msg("process PEB %d", pnum);
+		dbg_gen("process PEB %d", pnum);
 		err = process_eb(ubi, si, pnum);
 		if (err < 0)
 			goto out_vidh;
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index 6fa1ab3f2a7..1230a5e1b53 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -56,11 +56,11 @@ static int set_update_marker(struct ubi_device *ubi, struct ubi_volume *vol)
 	int err;
 	struct ubi_vtbl_record vtbl_rec;
 
-	dbg_msg("set update marker for volume %d", vol->vol_id);
+	dbg_gen("set update marker for volume %d", vol->vol_id);
 
 	if (vol->upd_marker) {
 		ubi_assert(ubi->vtbl[vol->vol_id].upd_marker);
-		dbg_msg("already set");
+		dbg_gen("already set");
 		return 0;
 	}
 
@@ -92,7 +92,7 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol,
 	uint64_t tmp;
 	struct ubi_vtbl_record vtbl_rec;
 
-	dbg_msg("clear update marker for volume %d", vol->vol_id);
+	dbg_gen("clear update marker for volume %d", vol->vol_id);
 
 	memcpy(&vtbl_rec, &ubi->vtbl[vol->vol_id],
 	       sizeof(struct ubi_vtbl_record));
@@ -133,7 +133,7 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
 	int i, err;
 	uint64_t tmp;
 
-	dbg_msg("start update of volume %d, %llu bytes", vol->vol_id, bytes);
+	dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes);
 	ubi_assert(!vol->updating && !vol->changing_leb);
 	vol->updating = 1;
 
@@ -183,7 +183,7 @@ int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 {
 	ubi_assert(!vol->updating && !vol->changing_leb);
 
-	dbg_msg("start changing LEB %d:%d, %u bytes",
+	dbg_gen("start changing LEB %d:%d, %u bytes",
 		vol->vol_id, req->lnum, req->bytes);
 	if (req->bytes == 0)
 		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0,
@@ -242,7 +242,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		memset(buf + len, 0xFF, l - len);
 		len = ubi_calc_data_len(ubi, buf, l);
 		if (len == 0) {
-			dbg_msg("all %d bytes contain 0xFF - skip", len);
+			dbg_gen("all %d bytes contain 0xFF - skip", len);
 			return 0;
 		}
 
@@ -283,7 +283,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 	uint64_t tmp;
 	int lnum, offs, err = 0, len, to_write = count;
 
-	dbg_msg("write %d of %lld bytes, %lld already passed",
+	dbg_gen("write %d of %lld bytes, %lld already passed",
 		count, vol->upd_bytes, vol->upd_received);
 
 	if (ubi->ro_mode)
@@ -400,7 +400,7 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 {
 	int err;
 
-	dbg_msg("write %d of %lld bytes, %lld already passed",
+	dbg_gen("write %d of %lld bytes, %lld already passed",
 		count, vol->upd_bytes, vol->upd_received);
 
 	if (ubi->ro_mode)
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index bfa7c5d2e06..2cd886a5ada 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -28,9 +28,9 @@
 #include "ubi.h"
 
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static void paranoid_check_volumes(struct ubi_device *ubi);
+static int paranoid_check_volumes(struct ubi_device *ubi);
 #else
-#define paranoid_check_volumes(ubi)
+#define paranoid_check_volumes(ubi) 0
 #endif
 
 static ssize_t vol_attribute_show(struct device *dev,
@@ -218,7 +218,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	spin_lock(&ubi->volumes_lock);
 	if (vol_id == UBI_VOL_NUM_AUTO) {
 		/* Find unused volume ID */
-		dbg_msg("search for vacant volume ID");
+		dbg_gen("search for vacant volume ID");
 		for (i = 0; i < ubi->vtbl_slots; i++)
 			if (!ubi->volumes[i]) {
 				vol_id = i;
@@ -233,7 +233,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		req->vol_id = vol_id;
 	}
 
-	dbg_msg("volume ID %d, %llu bytes, type %d, name %s",
+	dbg_gen("volume ID %d, %llu bytes, type %d, name %s",
 		vol_id, (unsigned long long)req->bytes,
 		(int)req->vol_type, req->name);
 
@@ -361,8 +361,8 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	ubi->vol_count += 1;
 	spin_unlock(&ubi->volumes_lock);
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	err = paranoid_check_volumes(ubi);
+	return err;
 
 out_sysfs:
 	/*
@@ -414,7 +414,7 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 	struct ubi_device *ubi = vol->ubi;
 	int i, err, vol_id = vol->vol_id, reserved_pebs = vol->reserved_pebs;
 
-	dbg_msg("remove UBI volume %d", vol_id);
+	dbg_gen("remove UBI volume %d", vol_id);
 	ubi_assert(desc->mode == UBI_EXCLUSIVE);
 	ubi_assert(vol == ubi->volumes[vol_id]);
 
@@ -465,8 +465,8 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 	ubi->vol_count -= 1;
 	spin_unlock(&ubi->volumes_lock);
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	err = paranoid_check_volumes(ubi);
+	return err;
 
 out_err:
 	ubi_err("cannot remove volume %d, error %d", vol_id, err);
@@ -497,7 +497,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	if (ubi->ro_mode)
 		return -EROFS;
 
-	dbg_msg("re-size volume %d to from %d to %d PEBs",
+	dbg_gen("re-size volume %d to from %d to %d PEBs",
 		vol_id, vol->reserved_pebs, reserved_pebs);
 
 	if (vol->vol_type == UBI_STATIC_VOLUME &&
@@ -586,8 +586,8 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 			(long long)vol->used_ebs * vol->usable_leb_size;
 	}
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	err = paranoid_check_volumes(ubi);
+	return err;
 
 out_acc:
 	if (pebs > 0) {
@@ -615,8 +615,7 @@ int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 	int err, vol_id = vol->vol_id;
 	dev_t dev;
 
-	dbg_msg("add volume %d", vol_id);
-	ubi_dbg_dump_vol_info(vol);
+	dbg_gen("add volume %d", vol_id);
 
 	/* Register character device for the volume */
 	cdev_init(&vol->cdev, &ubi_vol_cdev_operations);
@@ -650,8 +649,8 @@ int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 		return err;
 	}
 
-	paranoid_check_volumes(ubi);
-	return 0;
+	err = paranoid_check_volumes(ubi);
+	return err;
 
 out_gluebi:
 	err = ubi_destroy_gluebi(vol);
@@ -672,7 +671,7 @@ void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 {
 	int err;
 
-	dbg_msg("free volume %d", vol->vol_id);
+	dbg_gen("free volume %d", vol->vol_id);
 
 	ubi->volumes[vol->vol_id] = NULL;
 	err = ubi_destroy_gluebi(vol);
@@ -686,8 +685,10 @@ void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
  * paranoid_check_volume - check volume information.
  * @ubi: UBI device description object
  * @vol_id: volume ID
+ *
+ * Returns zero if volume is all right and a a negative error code if not.
  */
-static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
+static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 {
 	int idx = vol_id2idx(ubi, vol_id);
 	int reserved_pebs, alignment, data_pad, vol_type, name_len, upd_marker;
@@ -705,16 +706,7 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 			goto fail;
 		}
 		spin_unlock(&ubi->volumes_lock);
-		return;
-	}
-
-	if (vol->exclusive) {
-		/*
-		 * The volume may be being created at the moment, do not check
-		 * it (e.g., it may be in the middle of ubi_create_volume().
-		 */
-		spin_unlock(&ubi->volumes_lock);
-		return;
+		return 0;
 	}
 
 	if (vol->reserved_pebs < 0 || vol->alignment < 0 || vol->data_pad < 0 ||
@@ -830,25 +822,34 @@ static void paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 	}
 
 	spin_unlock(&ubi->volumes_lock);
-	return;
+	return 0;
 
 fail:
 	ubi_err("paranoid check failed for volume %d", vol_id);
-	ubi_dbg_dump_vol_info(vol);
-	ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
+	if (vol) {
+		ubi_dbg_dump_vol_info(vol);
+		ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
+	}
 	spin_unlock(&ubi->volumes_lock);
-	BUG();
+	return -EINVAL;
 }
 
 /**
  * paranoid_check_volumes - check information about all volumes.
  * @ubi: UBI device description object
+ *
+ * Returns zero if volumes are all right and a a negative error code if not.
  */
-static void paranoid_check_volumes(struct ubi_device *ubi)
+static int paranoid_check_volumes(struct ubi_device *ubi)
 {
-	int i;
+	int i, err = 0;
 
-	for (i = 0; i < ubi->vtbl_slots; i++)
-		paranoid_check_volume(ubi, i);
+	for (i = 0; i < ubi->vtbl_slots; i++) {
+		err = paranoid_check_volume(ubi, i);
+		if (err)
+			break;
+	}
+
+	return err;
 }
 #endif
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index d9af11a8682..05fb72fd268 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -371,7 +371,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 	 *    to LEB 0.
 	 */
 
-	dbg_msg("check layout volume");
+	dbg_gen("check layout volume");
 
 	/* Read both LEB 0 and LEB 1 into memory */
 	ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
-- 
cgit v1.2.3


From f40ac9cdf6991287f19bdafe9b0752ee40137908 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 13 Jul 2008 21:47:47 +0300
Subject: UBI: implement multiple volumes rename

Quite useful ioctl which allows to make atomic system upgrades.
The idea belongs to Richard Titmuss <richard_titmuss@logitech.com>

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c |   1 +
 drivers/mtd/ubi/cdev.c  | 188 +++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/mtd/ubi/ubi.h   |  33 ++++++++-
 drivers/mtd/ubi/vmt.c   |  57 ++++++++++++---
 drivers/mtd/ubi/vtbl.c  |  51 +++++++++++++
 include/mtd/ubi-user.h  |  60 +++++++++++++++-
 6 files changed, 375 insertions(+), 15 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 7210e1da1fc..4418a2369b5 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -806,6 +806,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 
 	mutex_init(&ubi->buf_mutex);
 	mutex_init(&ubi->ckvol_mutex);
+	mutex_init(&ubi->mult_mutex);
 	mutex_init(&ubi->volumes_mutex);
 	spin_lock_init(&ubi->volumes_lock);
 
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 7c19918cc91..bc8199c6a9f 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -605,6 +605,166 @@ static int verify_rsvol_req(const struct ubi_device *ubi,
 	return 0;
 }
 
+/**
+ * rename_volumes - rename UBI volumes.
+ * @ubi: UBI device description object
+ * @req: volumes re-name request
+ *
+ * This is a helper function for the volume re-name IOCTL which validates the
+ * the request, opens the volume and calls corresponding volumes management
+ * function. Returns zero in case of success and a negative error code in case
+ * of failure.
+ */
+static int rename_volumes(struct ubi_device *ubi,
+			  struct ubi_rnvol_req *req)
+{
+	int i, n, err;
+	struct list_head rename_list;
+	struct ubi_rename_entry *re, *re1;
+
+	if (req->count < 0 || req->count > UBI_MAX_RNVOL)
+		return -EINVAL;
+
+	if (req->count == 0)
+		return 0;
+
+	/* Validate volume IDs and names in the request */
+	for (i = 0; i < req->count; i++) {
+		if (req->ents[i].vol_id < 0 ||
+		    req->ents[i].vol_id >= ubi->vtbl_slots)
+			return -EINVAL;
+		if (req->ents[i].name_len < 0)
+			return -EINVAL;
+		if (req->ents[i].name_len > UBI_VOL_NAME_MAX)
+			return -ENAMETOOLONG;
+		req->ents[i].name[req->ents[i].name_len] = '\0';
+		n = strlen(req->ents[i].name);
+		if (n != req->ents[i].name_len)
+			err = -EINVAL;
+	}
+
+	/* Make sure volume IDs and names are unique */
+	for (i = 0; i < req->count - 1; i++) {
+		for (n = i + 1; n < req->count; n++) {
+			if (req->ents[i].vol_id == req->ents[n].vol_id) {
+				dbg_err("duplicated volume id %d",
+					req->ents[i].vol_id);
+				return -EINVAL;
+			}
+			if (!strcmp(req->ents[i].name, req->ents[n].name)) {
+				dbg_err("duplicated volume name \"%s\"",
+					req->ents[i].name);
+				return -EINVAL;
+			}
+		}
+	}
+
+	/* Create the re-name list */
+	INIT_LIST_HEAD(&rename_list);
+	for (i = 0; i < req->count; i++) {
+		int vol_id = req->ents[i].vol_id;
+		int name_len = req->ents[i].name_len;
+		const char *name = req->ents[i].name;
+
+		re = kzalloc(sizeof(struct ubi_rename_entry), GFP_KERNEL);
+		if (!re) {
+			err = -ENOMEM;
+			goto out_free;
+		}
+
+		re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_EXCLUSIVE);
+		if (IS_ERR(re->desc)) {
+			err = PTR_ERR(re->desc);
+			dbg_err("cannot open volume %d, error %d", vol_id, err);
+			kfree(re);
+			goto out_free;
+		}
+
+		/* Skip this re-naming if the name does not really change */
+		if (re->desc->vol->name_len == name_len &&
+		    !memcmp(re->desc->vol->name, name, name_len)) {
+			ubi_close_volume(re->desc);
+			kfree(re);
+			continue;
+		}
+
+		re->new_name_len = name_len;
+		memcpy(re->new_name, name, name_len);
+		list_add_tail(&re->list, &rename_list);
+		dbg_msg("will rename volume %d from \"%s\" to \"%s\"",
+			vol_id, re->desc->vol->name, name);
+	}
+
+	if (list_empty(&rename_list))
+		return 0;
+
+	/* Find out the volumes which have to be removed */
+	list_for_each_entry(re, &rename_list, list) {
+		struct ubi_volume_desc *desc;
+		int no_remove_needed = 0;
+
+		/*
+		 * Volume @re->vol_id is going to be re-named to
+		 * @re->new_name, while its current name is @name. If a volume
+		 * with name @re->new_name currently exists, it has to be
+		 * removed, unless it is also re-named in the request (@req).
+		 */
+		list_for_each_entry(re1, &rename_list, list) {
+			if (re->new_name_len == re1->desc->vol->name_len &&
+			    !memcmp(re->new_name, re1->desc->vol->name,
+				    re1->desc->vol->name_len)) {
+				no_remove_needed = 1;
+				break;
+			}
+		}
+
+		if (no_remove_needed)
+			continue;
+
+		/*
+		 * It seems we need to remove volume with name @re->new_name,
+		 * if it exists.
+		 */
+		desc = ubi_open_volume_nm(ubi->ubi_num, re->new_name, UBI_EXCLUSIVE);
+		if (IS_ERR(desc)) {
+			err = PTR_ERR(desc);
+			if (err == -ENODEV)
+				/* Re-naming into a non-existing volume name */
+				continue;
+
+			/* The volume exists but busy, or an error occurred */
+			dbg_err("cannot open volume \"%s\", error %d",
+				re->new_name, err);
+			goto out_free;
+		}
+
+		re = kzalloc(sizeof(struct ubi_rename_entry), GFP_KERNEL);
+		if (!re) {
+			err = -ENOMEM;
+			ubi_close_volume(desc);
+			goto out_free;
+		}
+
+		re->remove = 1;
+		re->desc = desc;
+		list_add(&re->list, &rename_list);
+		dbg_msg("will remove volume %d, name \"%s\"",
+			re->desc->vol->vol_id, re->desc->vol->name);
+	}
+
+	mutex_lock(&ubi->volumes_mutex);
+	err = ubi_rename_volumes(ubi, &rename_list);
+	mutex_unlock(&ubi->volumes_mutex);
+
+out_free:
+	list_for_each_entry_safe(re, re1, &rename_list, list) {
+		ubi_close_volume(re->desc);
+		list_del(&re->list);
+		kfree(re);
+	}
+	return err;
+}
+
 static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 			  unsigned int cmd, unsigned long arg)
 {
@@ -670,7 +830,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 		}
 
 		mutex_lock(&ubi->volumes_mutex);
-		err = ubi_remove_volume(desc);
+		err = ubi_remove_volume(desc, 0);
 		mutex_unlock(&ubi->volumes_mutex);
 
 		/*
@@ -717,6 +877,32 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
 		break;
 	}
 
+	/* Re-name volumes command */
+	case UBI_IOCRNVOL:
+	{
+		struct ubi_rnvol_req *req;
+
+		dbg_msg("re-name volumes");
+		req = kmalloc(sizeof(struct ubi_rnvol_req), GFP_KERNEL);
+		if (!req) {
+			err = -ENOMEM;
+			break;
+		};
+
+		err = copy_from_user(req, argp, sizeof(struct ubi_rnvol_req));
+		if (err) {
+			err = -EFAULT;
+			kfree(req);
+			break;
+		}
+
+		mutex_lock(&ubi->mult_mutex);
+		err = rename_volumes(ubi, req);
+		mutex_unlock(&ubi->mult_mutex);
+		kfree(req);
+		break;
+	}
+
 	default:
 		err = -ENOTTY;
 		break;
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 1fc32c863b7..274c67916b3 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -131,6 +131,27 @@ struct ubi_ltree_entry {
 	struct rw_semaphore mutex;
 };
 
+/**
+ * struct ubi_rename_entry - volume re-name description data structure.
+ * @new_name_len: new volume name length
+ * @new_name: new volume name
+ * @remove: if not zero, this volume should be removed, not re-named
+ * @desc: descriptor of the volume
+ * @list: links re-name entries into a list
+ *
+ * This data structure is utilized in the multiple volume re-name code. Namely,
+ * UBI first creates a list of &struct ubi_rename_entry objects from the
+ * &struct ubi_rnvol_req request object, and then utilizes this list to do all
+ * the job.
+ */
+struct ubi_rename_entry {
+	int new_name_len;
+	char new_name[UBI_VOL_NAME_MAX + 1];
+	int remove;
+	struct ubi_volume_desc *desc;
+	struct list_head list;
+};
+
 struct ubi_volume_desc;
 
 /**
@@ -206,7 +227,7 @@ struct ubi_volume {
 	int alignment;
 	int data_pad;
 	int name_len;
-	char name[UBI_VOL_NAME_MAX+1];
+	char name[UBI_VOL_NAME_MAX + 1];
 
 	int upd_ebs;
 	int ch_lnum;
@@ -272,7 +293,7 @@ struct ubi_wl_entry;
  * @vtbl_size: size of the volume table in bytes
  * @vtbl: in-RAM volume table copy
  * @volumes_mutex: protects on-flash volume table and serializes volume
- *                 changes, like creation, deletion, update, resize
+ *                 changes, like creation, deletion, update, re-size and re-name
  *
  * @max_ec: current highest erase counter value
  * @mean_ec: current mean erase counter value
@@ -330,6 +351,8 @@ struct ubi_wl_entry;
  * @peb_buf1: a buffer of PEB size used for different purposes
  * @peb_buf2: another buffer of PEB size used for different purposes
  * @buf_mutex: proptects @peb_buf1 and @peb_buf2
+ * @ckvol_mutex: serializes static volume checking when opening
+ * @mult_mutex: serializes operations on multiple volumes, like re-nameing
  * @dbg_peb_buf: buffer of PEB size used for debugging
  * @dbg_buf_mutex: proptects @dbg_peb_buf
  */
@@ -410,6 +433,7 @@ struct ubi_device {
 	void *peb_buf2;
 	struct mutex buf_mutex;
 	struct mutex ckvol_mutex;
+	struct mutex mult_mutex;
 #ifdef CONFIG_MTD_UBI_DEBUG
 	void *dbg_peb_buf;
 	struct mutex dbg_buf_mutex;
@@ -426,12 +450,15 @@ extern struct mutex ubi_devices_mutex;
 /* vtbl.c */
 int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 			   struct ubi_vtbl_record *vtbl_rec);
+int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
+			    struct list_head *rename_list);
 int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si);
 
 /* vmt.c */
 int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req);
-int ubi_remove_volume(struct ubi_volume_desc *desc);
+int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl);
 int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs);
+int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list);
 int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol);
 void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol);
 
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 2cd886a5ada..4be4014c70d 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -402,13 +402,14 @@ out_unlock:
 /**
  * ubi_remove_volume - remove volume.
  * @desc: volume descriptor
+ * @no_vtbl: do not change volume table if not zero
  *
  * This function removes volume described by @desc. The volume has to be opened
  * in "exclusive" mode. Returns zero in case of success and a negative error
  * code in case of failure. The caller has to have the @ubi->volumes_mutex
  * locked.
  */
-int ubi_remove_volume(struct ubi_volume_desc *desc)
+int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -437,9 +438,11 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 	if (err)
 		goto out_err;
 
-	err = ubi_change_vtbl_record(ubi, vol_id, NULL);
-	if (err)
-		goto out_err;
+	if (!no_vtbl) {
+		err = ubi_change_vtbl_record(ubi, vol_id, NULL);
+		if (err)
+			goto out_err;
+	}
 
 	for (i = 0; i < vol->reserved_pebs; i++) {
 		err = ubi_eba_unmap_leb(ubi, vol, i);
@@ -465,7 +468,8 @@ int ubi_remove_volume(struct ubi_volume_desc *desc)
 	ubi->vol_count -= 1;
 	spin_unlock(&ubi->volumes_lock);
 
-	err = paranoid_check_volumes(ubi);
+	if (!no_vtbl)
+		err = paranoid_check_volumes(ubi);
 	return err;
 
 out_err:
@@ -601,6 +605,44 @@ out_free:
 	return err;
 }
 
+/**
+ * ubi_rename_volumes - re-name UBI volumes.
+ * @ubi: UBI device description object
+ * @renam_list: list of &struct ubi_rename_entry objects
+ *
+ * This function re-names or removes volumes specified in the re-name list.
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list)
+{
+	int err;
+	struct ubi_rename_entry *re;
+
+	err = ubi_vtbl_rename_volumes(ubi, rename_list);
+	if (err)
+		return err;
+
+	list_for_each_entry(re, rename_list, list) {
+		if (re->remove) {
+			err = ubi_remove_volume(re->desc, 1);
+			if (err)
+				break;
+		} else {
+			struct ubi_volume *vol = re->desc->vol;
+
+			spin_lock(&ubi->volumes_lock);
+			vol->name_len = re->new_name_len;
+			memcpy(vol->name, re->new_name, re->new_name_len + 1);
+			spin_unlock(&ubi->volumes_lock);
+		}
+	}
+
+	if (!err)
+		paranoid_check_volumes(ubi);
+	return err;
+}
+
 /**
  * ubi_add_volume - add volume.
  * @ubi: UBI device description object
@@ -826,10 +868,9 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 
 fail:
 	ubi_err("paranoid check failed for volume %d", vol_id);
-	if (vol) {
+	if (vol)
 		ubi_dbg_dump_vol_info(vol);
-		ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
-	}
+	ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
 	spin_unlock(&ubi->volumes_lock);
 	return -EINVAL;
 }
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 05fb72fd268..23c5376234b 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -114,6 +114,57 @@ int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 	return 0;
 }
 
+/**
+ * ubi_vtbl_rename_volumes - rename UBI volumes in the volume table.
+ * @ubi: UBI device description object
+ * @renam_list: list of &struct ubi_rename_entry objects
+ *
+ * This function re-names multiple volumes specified in @req in the volume
+ * table. Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
+			    struct list_head *rename_list)
+{
+	int i, err;
+	struct ubi_rename_entry *re;
+	struct ubi_volume *layout_vol;
+
+	list_for_each_entry(re, rename_list, list) {
+		uint32_t crc;
+		struct ubi_volume *vol = re->desc->vol;
+		struct ubi_vtbl_record *vtbl_rec = &ubi->vtbl[vol->vol_id];
+
+		if (re->remove) {
+			memcpy(vtbl_rec, &empty_vtbl_record,
+			       sizeof(struct ubi_vtbl_record));
+			continue;
+		}
+
+		vtbl_rec->name_len = cpu_to_be16(re->new_name_len);
+		memcpy(vtbl_rec->name, re->new_name, re->new_name_len);
+		memset(vtbl_rec->name + re->new_name_len, 0,
+		       UBI_VOL_NAME_MAX + 1 - re->new_name_len);
+		crc = crc32(UBI_CRC32_INIT, vtbl_rec,
+			    UBI_VTBL_RECORD_SIZE_CRC);
+		vtbl_rec->crc = cpu_to_be32(crc);
+	}
+
+	layout_vol = ubi->volumes[vol_id2idx(ubi, UBI_LAYOUT_VOLUME_ID)];
+	for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
+		err = ubi_eba_unmap_leb(ubi, layout_vol, i);
+		if (err)
+			return err;
+
+		err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0,
+					ubi->vtbl_size, UBI_LONGTERM);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 /**
  * vtbl_check - check if volume table is not corrupted and contains sensible
  *              data.
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index a7421f130cc..e8e57c3dfcd 100644
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -58,6 +58,13 @@
  * device should be used. A &struct ubi_rsvol_req object has to be properly
  * filled and a pointer to it has to be passed to the IOCTL.
  *
+ * UBI volumes re-name
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command
+ * of the UBI character device should be used. A &struct ubi_rnvol_req object
+ * has to be properly filled and a pointer to it has to be passed to the IOCTL.
+ *
  * UBI volume update
  * ~~~~~~~~~~~~~~~~~
  *
@@ -104,6 +111,8 @@
 #define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t)
 /* Re-size an UBI volume */
 #define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
+/* Re-name volumes */
+#define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req)
 
 /* IOCTL commands of the UBI control character device */
 
@@ -128,6 +137,9 @@
 /* Maximum MTD device name length supported by UBI */
 #define MAX_UBI_MTD_NAME_LEN 127
 
+/* Maximum amount of UBI volumes that can be re-named at one go */
+#define UBI_MAX_RNVOL 32
+
 /*
  * UBI data type hint constants.
  *
@@ -189,7 +201,7 @@ struct ubi_attach_req {
 	int32_t ubi_num;
 	int32_t mtd_num;
 	int32_t vid_hdr_offset;
-	uint8_t padding[12];
+	int8_t padding[12];
 };
 
 /**
@@ -250,6 +262,48 @@ struct ubi_rsvol_req {
 	int32_t vol_id;
 } __attribute__ ((packed));
 
+/**
+ * struct ubi_rnvol_req - volumes re-name request.
+ * @count: count of volumes to re-name
+ * @padding1:  reserved for future, not used, has to be zeroed
+ * @vol_id: ID of the volume to re-name
+ * @name_len: name length
+ * @padding2:  reserved for future, not used, has to be zeroed
+ * @name: new volume name
+ *
+ * UBI allows to re-name up to %32 volumes at one go. The count of volumes to
+ * re-name is specified in the @count field. The ID of the volumes to re-name
+ * and the new names are specified in the @vol_id and @name fields.
+ *
+ * The UBI volume re-name operation is atomic, which means that should power cut
+ * happen, the volumes will have either old name or new name. So the possible
+ * use-cases of this command is atomic upgrade. Indeed, to upgrade, say, volumes
+ * A and B one may create temporary volumes %A1 and %B1 with the new contents,
+ * then atomically re-name A1->A and B1->B, in which case old %A and %B will
+ * be removed.
+ *
+ * If it is not desirable to remove old A and B, the re-name request has to
+ * contain 4 entries: A1->A, A->A1, B1->B, B->B1, in which case old A1 and B1
+ * become A and B, and old A and B will become A1 and B1.
+ *
+ * It is also OK to request: A1->A, A1->X, B1->B, B->Y, in which case old A1
+ * and B1 become A and B, and old A and B become X and Y.
+ *
+ * In other words, in case of re-naming into an existing volume name, the
+ * existing volume is removed, unless it is re-named as well at the same
+ * re-name request.
+ */
+struct ubi_rnvol_req {
+	int32_t count;
+	int8_t padding1[12];
+	struct {
+		int32_t vol_id;
+		int16_t name_len;
+		int8_t  padding2[2];
+		char    name[UBI_MAX_VOLUME_NAME + 1];
+	} ents[UBI_MAX_RNVOL];
+} __attribute__ ((packed));
+
 /**
  * struct ubi_leb_change_req - a data structure used in atomic logical
  *                             eraseblock change requests.
@@ -261,8 +315,8 @@ struct ubi_rsvol_req {
 struct ubi_leb_change_req {
 	int32_t lnum;
 	int32_t bytes;
-	uint8_t dtype;
-	uint8_t padding[7];
+	int8_t  dtype;
+	int8_t  padding[7];
 } __attribute__ ((packed));
 
 #endif /* __UBI_USER_H__ */
-- 
cgit v1.2.3


From 8c1e6ee10bd87d70faada065a8d1f70732c17382 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Fri, 18 Jul 2008 12:20:23 +0300
Subject: UBI: rework scrubbing messages

If bit-flips happen often, UBI prints to many messages. Lessen
the amount by only printing the messages when the PEB has been
scrubbed. Also, print torturing messages.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/io.c | 8 +++++++-
 drivers/mtd/ubi/wl.c | 6 +++++-
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 27b9c2c2fc6..2bebb39d19b 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -156,8 +156,12 @@ retry:
 			/*
 			 * -EUCLEAN is reported if there was a bit-flip which
 			 * was corrected, so this is harmless.
+			 *
+			 * We do not report about it here unless debugging is
+			 * enabled. A corresponding message will be printed
+			 * later, when it is has been scrubbed.
 			 */
-			ubi_msg("fixable bit-flip detected at PEB %d", pnum);
+			dbg_msg("fixable bit-flip detected at PEB %d", pnum);
 			ubi_assert(len == read);
 			return UBI_IO_BITFLIPS;
 		}
@@ -391,6 +395,7 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 {
 	int err, i, patt_count;
 
+	ubi_msg("run torture test for PEB %d", pnum);
 	patt_count = ARRAY_SIZE(patterns);
 	ubi_assert(patt_count > 0);
 
@@ -434,6 +439,7 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
 	}
 
 	err = patt_count;
+	ubi_msg("PEB %d passed torture test, do not mark it a bad", pnum);
 
 out:
 	mutex_unlock(&ubi->buf_mutex);
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 761952ba125..6821952bcdb 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -873,6 +873,10 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 	}
 
 	ubi_free_vid_hdr(ubi, vid_hdr);
+	if (scrubbing && !protect)
+		ubi_msg("scrubbed PEB %d, data moved to PEB %d",
+			e1->pnum, e2->pnum);
+
 	spin_lock(&ubi->wl_lock);
 	if (protect)
 		prot_tree_add(ubi, e1, pe, protect);
@@ -1231,7 +1235,7 @@ int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum)
 {
 	struct ubi_wl_entry *e;
 
-	ubi_msg("schedule PEB %d for scrubbing", pnum);
+	dbg_msg("schedule PEB %d for scrubbing", pnum);
 
 retry:
 	spin_lock(&ubi->wl_lock);
-- 
cgit v1.2.3


From 4d88de4beb6f327dfc7c2221eab532dad5b2bb3e Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Fri, 18 Jul 2008 12:42:14 +0300
Subject: UBI: bugfix - do not torture PEB needlessly

This is probably a copy-paste bug - we torture the old PEB
in the atomic LEB change function, but we should not do this.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/eba.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 613cd1e5164..e14208152c3 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -906,7 +906,7 @@ retry:
 	}
 
 	if (vol->eba_tbl[lnum] >= 0) {
-		err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 1);
+		err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 0);
 		if (err)
 			goto out_leb_unlock;
 	}
-- 
cgit v1.2.3


From 9c9ec147709e63e4e8ac6a037c6bb50688ff8e9c Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Fri, 18 Jul 2008 13:19:52 +0300
Subject: UBI: fix checkpatch.pl errors and warnings

Just out or curiousity ran checkpatch.pl for whole UBI,
and discovered there are quite a few of stylistic issues.
Fix them.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c  |  8 ++---
 drivers/mtd/ubi/cdev.c   |  4 +--
 drivers/mtd/ubi/eba.c    |  7 ++--
 drivers/mtd/ubi/gluebi.c |  4 +--
 drivers/mtd/ubi/io.c     |  8 ++---
 drivers/mtd/ubi/scan.c   |  9 ++---
 drivers/mtd/ubi/ubi.h    |  3 +-
 drivers/mtd/ubi/upd.c    |  8 +++--
 drivers/mtd/ubi/vmt.c    |  4 +--
 drivers/mtd/ubi/vtbl.c   | 12 +++----
 drivers/mtd/ubi/wl.c     | 92 +++++++++++++++++++++++-------------------------
 include/mtd/ubi-user.h   | 16 ++++-----
 12 files changed, 86 insertions(+), 89 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 4418a2369b5..535d9a8a6ba 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -51,14 +51,13 @@
  * @name: MTD device name or number string
  * @vid_hdr_offs: VID header offset
  */
-struct mtd_dev_param
-{
+struct mtd_dev_param {
 	char name[MTD_PARAM_LEN_MAX];
 	int vid_hdr_offs;
 };
 
 /* Numbers of elements set in the @mtd_dev_param array */
-static int mtd_devs = 0;
+static int mtd_devs;
 
 /* MTD devices specification parameters */
 static struct mtd_dev_param mtd_dev_param[UBI_MAX_DEVICES];
@@ -781,7 +780,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 			if (!ubi_devices[ubi_num])
 				break;
 		if (ubi_num == UBI_MAX_DEVICES) {
-			dbg_err("only %d UBI devices may be created", UBI_MAX_DEVICES);
+			dbg_err("only %d UBI devices may be created",
+				UBI_MAX_DEVICES);
 			return -ENFILE;
 		}
 	} else {
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index bc8199c6a9f..03c759b4eeb 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -39,9 +39,9 @@
 #include <linux/stat.h>
 #include <linux/ioctl.h>
 #include <linux/capability.h>
+#include <linux/uaccess.h>
 #include <linux/smp_lock.h>
 #include <mtd/ubi-user.h>
-#include <asm/uaccess.h>
 #include <asm/div64.h>
 #include "ubi.h"
 
@@ -352,7 +352,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 }
 
 #else
-#define vol_cdev_direct_write(file, buf, count, offp) -EPERM
+#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM)
 #endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */
 
 static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index e14208152c3..e04bcf1dff8 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -189,9 +189,7 @@ static struct ubi_ltree_entry *ltree_add_entry(struct ubi_device *ubi,
 	le->users += 1;
 	spin_unlock(&ubi->ltree_lock);
 
-	if (le_free)
-		kfree(le_free);
-
+	kfree(le_free);
 	return le;
 }
 
@@ -503,9 +501,8 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
 	struct ubi_vid_hdr *vid_hdr;
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
-	if (!vid_hdr) {
+	if (!vid_hdr)
 		return -ENOMEM;
-	}
 
 	mutex_lock(&ubi->buf_mutex);
 
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 49f52dceea9..605812bb0b1 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -249,8 +249,8 @@ static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr)
 	if (err)
 		goto out_err;
 
-        instr->state = MTD_ERASE_DONE;
-        mtd_erase_callback(instr);
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
 	return 0;
 
 out_err:
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 2bebb39d19b..a84f0db0a03 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -167,8 +167,8 @@ retry:
 		}
 
 		if (read != len && retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d while reading %d bytes from PEB %d:%d, "
-			       "read only %zd bytes, retry",
+			dbg_io("error %d while reading %d bytes from PEB %d:%d,"
+			       " read only %zd bytes, retry",
 			       err, len, pnum, offset, read);
 			yield();
 			goto retry;
@@ -705,8 +705,8 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 
 	if (hdr_crc != crc) {
 		if (verbose) {
-			ubi_warn("bad EC header CRC at PEB %d, calculated %#08x,"
-				 " read %#08x", pnum, crc, hdr_crc);
+			ubi_warn("bad EC header CRC at PEB %d, calculated "
+				 "%#08x, read %#08x", pnum, crc, hdr_crc);
 			ubi_dbg_dump_ec_hdr(ec_hdr);
 		}
 		return UBI_IO_BAD_EC_HDR;
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 40eca9ce5fa..0bb7488862d 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -248,7 +248,8 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 	unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum);
 
 	if (seb->sqnum == 0 && sqnum2 == 0) {
-		long long abs, v1 = seb->leb_ver, v2 = be32_to_cpu(vid_hdr->leb_ver);
+		long long abs;
+		long long v1 = seb->leb_ver, v2 = be32_to_cpu(vid_hdr->leb_ver);
 
 		/*
 		 * UBI constantly increases the logical eraseblock version
@@ -752,7 +753,8 @@ struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
  * This function returns a zero if the physical eraseblock was successfully
  * handled and a negative error code in case of failure.
  */
-static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, int pnum)
+static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
+		      int pnum)
 {
 	long long uninitialized_var(ec);
 	int err, bitflips = 0, vol_id, ec_corr = 0;
@@ -1301,8 +1303,7 @@ static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
 		if (err < 0) {
 			kfree(buf);
 			return err;
-		}
-		else if (err)
+		} else if (err)
 			buf[pnum] = 1;
 	}
 
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 274c67916b3..14a5596d2d9 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -473,7 +473,8 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 			     const void __user *buf, int count);
 
 /* misc.c */
-int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf, int length);
+int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf,
+		      int length);
 int ubi_check_volume(struct ubi_device *ubi, int vol_id);
 void ubi_calculate_reserved(struct ubi_device *ubi);
 
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index 1230a5e1b53..3b8beb8545c 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -39,7 +39,7 @@
  */
 
 #include <linux/err.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/div64.h>
 #include "ubi.h"
 
@@ -246,7 +246,8 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 			return 0;
 		}
 
-		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len, UBI_UNKNOWN);
+		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len,
+					UBI_UNKNOWN);
 	} else {
 		/*
 		 * When writing static volume, and this is the last logical
@@ -418,7 +419,8 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 	if (vol->upd_received == vol->upd_bytes) {
 		int len = ALIGN((int)vol->upd_bytes, ubi->min_io_size);
 
-		memset(vol->upd_buf + vol->upd_bytes, 0xFF, len - vol->upd_bytes);
+		memset(vol->upd_buf + vol->upd_bytes, 0xFF,
+		       len - vol->upd_bytes);
 		len = ubi_calc_data_len(ubi, vol->upd_buf, len);
 		err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
 						vol->upd_buf, len, UBI_UNKNOWN);
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 4be4014c70d..852482d8b18 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -253,7 +253,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 			goto out_unlock;
 		}
 
-        /* Calculate how many eraseblocks are requested */
+	/* Calculate how many eraseblocks are requested */
 	vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment;
 	bytes = req->bytes;
 	if (do_div(bytes, vol->usable_leb_size))
@@ -858,7 +858,7 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 
 	if (alignment != vol->alignment || data_pad != vol->data_pad ||
 	    upd_marker != vol->upd_marker || vol_type != vol->vol_type ||
-	    name_len!= vol->name_len || strncmp(name, vol->name, name_len)) {
+	    name_len != vol->name_len || strncmp(name, vol->name, name_len)) {
 		ubi_err("volume info is different");
 		goto fail;
 	}
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 23c5376234b..10c22257f60 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -461,7 +461,8 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 	if (!leb_corrupted[0]) {
 		/* LEB 0 is OK */
 		if (leb[1])
-			leb_corrupted[1] = memcmp(leb[0], leb[1], ubi->vtbl_size);
+			leb_corrupted[1] = memcmp(leb[0], leb[1],
+						  ubi->vtbl_size);
 		if (leb_corrupted[1]) {
 			ubi_warn("volume table copy #2 is corrupted");
 			err = create_vtbl(ubi, si, 1, leb[0]);
@@ -859,11 +860,10 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 
 out_free:
 	vfree(ubi->vtbl);
-	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++)
-		if (ubi->volumes[i]) {
-			kfree(ubi->volumes[i]);
-			ubi->volumes[i] = NULL;
-		}
+	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
+		kfree(ubi->volumes[i]);
+		ubi->volumes[i] = NULL;
+	}
 	return err;
 }
 
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 6821952bcdb..2a5d2a0e14a 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -475,52 +475,47 @@ retry:
 	}
 
 	switch (dtype) {
-		case UBI_LONGTERM:
-			/*
-			 * For long term data we pick a physical eraseblock
-			 * with high erase counter. But the highest erase
-			 * counter we can pick is bounded by the the lowest
-			 * erase counter plus %WL_FREE_MAX_DIFF.
-			 */
-			e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
-			protect = LT_PROTECTION;
-			break;
-		case UBI_UNKNOWN:
-			/*
-			 * For unknown data we pick a physical eraseblock with
-			 * medium erase counter. But we by no means can pick a
-			 * physical eraseblock with erase counter greater or
-			 * equivalent than the lowest erase counter plus
-			 * %WL_FREE_MAX_DIFF.
-			 */
-			first = rb_entry(rb_first(&ubi->free),
-					 struct ubi_wl_entry, rb);
-			last = rb_entry(rb_last(&ubi->free),
-					struct ubi_wl_entry, rb);
+	case UBI_LONGTERM:
+		/*
+		 * For long term data we pick a physical eraseblock with high
+		 * erase counter. But the highest erase counter we can pick is
+		 * bounded by the the lowest erase counter plus
+		 * %WL_FREE_MAX_DIFF.
+		 */
+		e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+		protect = LT_PROTECTION;
+		break;
+	case UBI_UNKNOWN:
+		/*
+		 * For unknown data we pick a physical eraseblock with medium
+		 * erase counter. But we by no means can pick a physical
+		 * eraseblock with erase counter greater or equivalent than the
+		 * lowest erase counter plus %WL_FREE_MAX_DIFF.
+		 */
+		first = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, rb);
+		last = rb_entry(rb_last(&ubi->free), struct ubi_wl_entry, rb);
 
-			if (last->ec - first->ec < WL_FREE_MAX_DIFF)
-				e = rb_entry(ubi->free.rb_node,
-						struct ubi_wl_entry, rb);
-			else {
-				medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2;
-				e = find_wl_entry(&ubi->free, medium_ec);
-			}
-			protect = U_PROTECTION;
-			break;
-		case UBI_SHORTTERM:
-			/*
-			 * For short term data we pick a physical eraseblock
-			 * with the lowest erase counter as we expect it will
-			 * be erased soon.
-			 */
-			e = rb_entry(rb_first(&ubi->free),
-				     struct ubi_wl_entry, rb);
-			protect = ST_PROTECTION;
-			break;
-		default:
-			protect = 0;
-			e = NULL;
-			BUG();
+		if (last->ec - first->ec < WL_FREE_MAX_DIFF)
+			e = rb_entry(ubi->free.rb_node,
+					struct ubi_wl_entry, rb);
+		else {
+			medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2;
+			e = find_wl_entry(&ubi->free, medium_ec);
+		}
+		protect = U_PROTECTION;
+		break;
+	case UBI_SHORTTERM:
+		/*
+		 * For short term data we pick a physical eraseblock with the
+		 * lowest erase counter as we expect it will be erased soon.
+		 */
+		e = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, rb);
+		protect = ST_PROTECTION;
+		break;
+	default:
+		protect = 0;
+		e = NULL;
+		BUG();
 	}
 
 	/*
@@ -584,7 +579,8 @@ found:
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e, int torture)
+static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
+		      int torture)
 {
 	int err;
 	struct ubi_ec_hdr *ec_hdr;
@@ -1060,8 +1056,8 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 		spin_unlock(&ubi->wl_lock);
 
 		/*
-		 * One more erase operation has happened, take care about protected
-		 * physical eraseblocks.
+		 * One more erase operation has happened, take care about
+		 * protected physical eraseblocks.
 		 */
 		check_protection_over(ubi);
 
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index e8e57c3dfcd..ccdc562e444 100644
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -188,14 +188,14 @@ enum {
  * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages.
  *
  * But in rare cases, if this optimizes things, the VID header may be placed to
- * a different offset. For example, the boot-loader might do things faster if the
- * VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. As
- * the boot-loader would not normally need to read EC headers (unless it needs
- * UBI in RW mode), it might be faster to calculate ECC. This is weird example,
- * but it real-life example. So, in this example, @vid_hdr_offer would be
- * 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
- * aligned, which is OK, as UBI is clever enough to realize this is 4th sub-page
- * of the first page and add needed padding.
+ * a different offset. For example, the boot-loader might do things faster if
+ * the VID header sits at the end of the first 2KiB NAND page with 4 sub-pages.
+ * As the boot-loader would not normally need to read EC headers (unless it
+ * needs UBI in RW mode), it might be faster to calculate ECC. This is weird
+ * example, but it real-life example. So, in this example, @vid_hdr_offer would
+ * be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
+ * aligned, which is OK, as UBI is clever enough to realize this is 4th
+ * sub-page of the first page and add needed padding.
  */
 struct ubi_attach_req {
 	int32_t ubi_num;
-- 
cgit v1.2.3


From ebaaf1af3e9ef05c4fb7c61e4530c15e1ad10e3b Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Fri, 18 Jul 2008 13:34:32 +0300
Subject: UBI: fix kernel-doc errors and warnings

No functional changes, just tweak comments to make kernel-doc
work fine and stop complaining.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c |  8 +++-----
 drivers/mtd/ubi/io.c    |  6 ++----
 drivers/mtd/ubi/scan.c  | 18 ++++++------------
 drivers/mtd/ubi/ubi.h   |  1 +
 drivers/mtd/ubi/upd.c   |  2 ++
 drivers/mtd/ubi/vmt.c   |  2 +-
 drivers/mtd/ubi/vtbl.c  |  8 +++-----
 drivers/mtd/ubi/wl.c    | 13 +++++--------
 8 files changed, 23 insertions(+), 35 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 535d9a8a6ba..eba760b3b8c 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -159,8 +159,7 @@ void ubi_put_device(struct ubi_device *ubi)
 }
 
 /**
- * ubi_get_by_major - get UBI device description object by character device
- *                    major number.
+ * ubi_get_by_major - get UBI device by character device major number.
  * @major: major number
  *
  * This function is similar to 'ubi_get_device()', but it searches the device
@@ -727,7 +726,7 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
 
 /**
  * ubi_attach_mtd_dev - attach an MTD device.
- * @mtd_dev: MTD device description object
+ * @mtd: MTD device description object
  * @ubi_num: number to assign to the new UBI device
  * @vid_hdr_offset: VID header offset
  *
@@ -1095,8 +1094,7 @@ static void __exit ubi_exit(void)
 module_exit(ubi_exit);
 
 /**
- * bytes_str_to_int - convert a string representing number of bytes to an
- * integer.
+ * bytes_str_to_int - convert a number of bytes string into an integer.
  * @str: the string to convert
  *
  * This function returns positive resulting integer in case of success and a
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index a84f0db0a03..2fb64be44f1 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -1101,8 +1101,7 @@ fail:
 }
 
 /**
- * paranoid_check_peb_ec_hdr - check that the erase counter header of a
- * physical eraseblock is in-place and is all right.
+ * paranoid_check_peb_ec_hdr - check erase counter header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
@@ -1180,8 +1179,7 @@ fail:
 }
 
 /**
- * paranoid_check_peb_vid_hdr - check that the volume identifier header of a
- * physical eraseblock is in-place and is all right.
+ * paranoid_check_peb_vid_hdr - check volume identifier header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 0bb7488862d..4dfbf27b065 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -93,8 +93,7 @@ static int add_to_list(struct ubi_scan_info *si, int pnum, int ec,
 }
 
 /**
- * validate_vid_hdr - check that volume identifier header is correct and
- * consistent.
+ * validate_vid_hdr - check volume identifier header.
  * @vid_hdr: the volume identifier header to check
  * @sv: information about the volume this logical eraseblock belongs to
  * @pnum: physical eraseblock number the VID header came from
@@ -380,8 +379,7 @@ out_free_vidh:
 }
 
 /**
- * ubi_scan_add_used - add information about a physical eraseblock to the
- * scanning information.
+ * ubi_scan_add_used - add physical eraseblock to the scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  * @pnum: the physical eraseblock number
@@ -555,8 +553,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 }
 
 /**
- * ubi_scan_find_sv - find information about a particular volume in the
- * scanning information.
+ * ubi_scan_find_sv - find volume in the scanning information.
  * @si: scanning information
  * @vol_id: the requested volume ID
  *
@@ -585,8 +582,7 @@ struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
 }
 
 /**
- * ubi_scan_find_seb - find information about a particular logical
- * eraseblock in the volume scanning information.
+ * ubi_scan_find_seb - find LEB in the volume scanning information.
  * @sv: a pointer to the volume scanning information
  * @lnum: the requested logical eraseblock
  *
@@ -744,8 +740,7 @@ struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
 }
 
 /**
- * process_eb - read UBI headers, check them and add corresponding data
- * to the scanning information.
+ * process_eb - read, check UBI headers, and add them to scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  * @pnum: the physical eraseblock number
@@ -1083,8 +1078,7 @@ void ubi_scan_destroy_si(struct ubi_scan_info *si)
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
 
 /**
- * paranoid_check_si - check if the scanning information is correct and
- * consistent.
+ * paranoid_check_si - check the scanning information.
  * @ubi: UBI device description object
  * @si: scanning information
  *
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 14a5596d2d9..1c3fa18c26a 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -313,6 +313,7 @@ struct ubi_wl_entry;
  *           @move_to, @move_to_put @erase_pending, @wl_scheduled, and @works
  *           fields
  * @move_mutex: serializes eraseblock moves
+ * @work_sem: sycnhronizes the WL worker with use tasks
  * @wl_scheduled: non-zero if the wear-leveling was scheduled
  * @lookuptbl: a table to quickly find a &struct ubi_wl_entry object for any
  *             physical eraseblock
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index 3b8beb8545c..8b89cc18ff0 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -268,6 +268,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 
 /**
  * ubi_more_update_data - write more update data.
+ * @ubi: UBI device description object
  * @vol: volume description object
  * @buf: write data (user-space memory buffer)
  * @count: how much bytes to write
@@ -385,6 +386,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 
 /**
  * ubi_more_leb_change_data - accept more data for atomic LEB change.
+ * @ubi: UBI device description object
  * @vol: volume description object
  * @buf: write data (user-space memory buffer)
  * @count: how much bytes to write
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 852482d8b18..d40066833ab 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -608,7 +608,7 @@ out_free:
 /**
  * ubi_rename_volumes - re-name UBI volumes.
  * @ubi: UBI device description object
- * @renam_list: list of &struct ubi_rename_entry objects
+ * @rename_list: list of &struct ubi_rename_entry objects
  *
  * This function re-names or removes volumes specified in the re-name list.
  * Returns zero in case of success and a negative error code in case of
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 10c22257f60..4e1c489a3ba 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -117,7 +117,7 @@ int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 /**
  * ubi_vtbl_rename_volumes - rename UBI volumes in the volume table.
  * @ubi: UBI device description object
- * @renam_list: list of &struct ubi_rename_entry objects
+ * @rename_list: list of &struct ubi_rename_entry objects
  *
  * This function re-names multiple volumes specified in @req in the volume
  * table. Returns zero in case of success and a negative error code in case of
@@ -166,8 +166,7 @@ int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
 }
 
 /**
- * vtbl_check - check if volume table is not corrupted and contains sensible
- *              data.
+ * vtbl_check - check if volume table is not corrupted and sensible.
  * @ubi: UBI device description object
  * @vtbl: volume table
  *
@@ -780,8 +779,7 @@ static int check_scanning_info(const struct ubi_device *ubi,
 }
 
 /**
- * ubi_read_volume_table - read volume table.
- * information.
+ * ubi_read_volume_table - read the volume table.
  * @ubi: UBI device description object
  * @si: scanning information
  *
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 2a5d2a0e14a..05d70937b54 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -632,8 +632,7 @@ out_free:
 }
 
 /**
- * check_protection_over - check if it is time to stop protecting some
- * physical eraseblocks.
+ * check_protection_over - check if it is time to stop protecting some PEBs.
  * @ubi: UBI device description object
  *
  * This function is called after each erase operation, when the absolute erase
@@ -1601,8 +1600,7 @@ void ubi_wl_close(struct ubi_device *ubi)
 #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
 
 /**
- * paranoid_check_ec - make sure that the erase counter of a physical eraseblock
- * is correct.
+ * paranoid_check_ec - make sure that the erase counter of a PEB is correct.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @ec: the erase counter to check
@@ -1643,13 +1641,12 @@ out_free:
 }
 
 /**
- * paranoid_check_in_wl_tree - make sure that a wear-leveling entry is present
- * in a WL RB-tree.
+ * paranoid_check_in_wl_tree - check that wear-leveling entry is in WL RB-tree.
  * @e: the wear-leveling entry to check
  * @root: the root of the tree
  *
- * This function returns zero if @e is in the @root RB-tree and %1 if it
- * is not.
+ * This function returns zero if @e is in the @root RB-tree and %1 if it is
+ * not.
  */
 static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
 				     struct rb_root *root)
-- 
cgit v1.2.3


From 9869cd801c107bbae91663c3f4edbb6b5715919f Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Fri, 18 Jul 2008 13:53:39 +0300
Subject: UBI: remove pre-sqnum images support

Before UBI got into mainline, there was a slight flash format
change - we did not have sequence number support, then added it.

We have carried full support of those ancient images till this
moment. Now the support is removed, well, not fully removed.

Now UBI will support only _clean_ old images, which were cleanly
detached last time (just before kernel upgrade). This is most
likely the case.

But we will not support unclean ancient images. Surprisingly,
this allows us to remove a big chunk of legacy code.

And the same should be true for downgrading: clean images should
downgrade fine, but unclean ones will not.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/debug.c     |  2 --
 drivers/mtd/ubi/scan.c      | 87 +++++++++++++--------------------------------
 drivers/mtd/ubi/scan.h      |  2 --
 drivers/mtd/ubi/ubi-media.h | 17 ++++-----
 drivers/mtd/ubi/vtbl.c      |  1 -
 5 files changed, 30 insertions(+), 79 deletions(-)

diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index 21e0d7d76a4..c0ed60e8ade 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -65,7 +65,6 @@ void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
 	printk(KERN_DEBUG "\tcompat    %d\n",   (int)vid_hdr->compat);
 	printk(KERN_DEBUG "\tvol_id    %d\n",   be32_to_cpu(vid_hdr->vol_id));
 	printk(KERN_DEBUG "\tlnum      %d\n",   be32_to_cpu(vid_hdr->lnum));
-	printk(KERN_DEBUG "\tleb_ver   %u\n",   be32_to_cpu(vid_hdr->leb_ver));
 	printk(KERN_DEBUG "\tdata_size %d\n",   be32_to_cpu(vid_hdr->data_size));
 	printk(KERN_DEBUG "\tused_ebs  %d\n",   be32_to_cpu(vid_hdr->used_ebs));
 	printk(KERN_DEBUG "\tdata_pad  %d\n",   be32_to_cpu(vid_hdr->data_pad));
@@ -172,7 +171,6 @@ void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type)
 		printk(KERN_DEBUG "\tlnum     %d\n", seb->lnum);
 		printk(KERN_DEBUG "\tscrub    %d\n", seb->scrub);
 		printk(KERN_DEBUG "\tsqnum    %llu\n", seb->sqnum);
-		printk(KERN_DEBUG "\tleb_ver  %u\n", seb->leb_ver);
 	}
 }
 
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 4dfbf27b065..967bb4406df 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -246,46 +246,21 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 	struct ubi_vid_hdr *vh = NULL;
 	unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum);
 
-	if (seb->sqnum == 0 && sqnum2 == 0) {
-		long long abs;
-		long long v1 = seb->leb_ver, v2 = be32_to_cpu(vid_hdr->leb_ver);
-
+	if (sqnum2 == seb->sqnum) {
 		/*
-		 * UBI constantly increases the logical eraseblock version
-		 * number and it can overflow. Thus, we have to bear in mind
-		 * that versions that are close to %0xFFFFFFFF are less then
-		 * versions that are close to %0.
-		 *
-		 * The UBI WL sub-system guarantees that the number of pending
-		 * tasks is not greater then %0x7FFFFFFF. So, if the difference
-		 * between any two versions is greater or equivalent to
-		 * %0x7FFFFFFF, there was an overflow and the logical
-		 * eraseblock with lower version is actually newer then the one
-		 * with higher version.
-		 *
-		 * FIXME: but this is anyway obsolete and will be removed at
-		 * some point.
+		 * This must be a really ancient UBI image which has been
+		 * created before sequence numbers support has been added. At
+		 * that times we used 32-bit LEB versions stored in logical
+		 * eraseblocks. That was before UBI got into mainline. We do not
+		 * support these images anymore. Well, those images will work
+		 * still work, but only if no unclean reboots happened.
 		 */
-		dbg_bld("using old crappy leb_ver stuff");
-
-		if (v1 == v2) {
-			ubi_err("PEB %d and PEB %d have the same version %lld",
-				seb->pnum, pnum, v1);
-			return -EINVAL;
-		}
+		ubi_err("unsupported on-flash UBI format\n");
+		return -EINVAL;
+	}
 
-		abs = v1 - v2;
-		if (abs < 0)
-			abs = -abs;
-
-		if (abs < 0x7FFFFFFF)
-			/* Non-overflow situation */
-			second_is_newer = (v2 > v1);
-		else
-			second_is_newer = (v2 < v1);
-	} else
-		/* Obviously the LEB with lower sequence counter is older */
-		second_is_newer = sqnum2 > seb->sqnum;
+	/* Obviously the LEB with lower sequence counter is older */
+	second_is_newer = !!(sqnum2 > seb->sqnum);
 
 	/*
 	 * Now we know which copy is newer. If the copy flag of the PEB with
@@ -293,7 +268,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 	 * check data CRC. For the second PEB we already have the VID header,
 	 * for the first one - we'll need to re-read it from flash.
 	 *
-	 * FIXME: this may be optimized so that we wouldn't read twice.
+	 * Note: this may be optimized so that we wouldn't read twice.
 	 */
 
 	if (second_is_newer) {
@@ -399,7 +374,6 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 		      int bitflips)
 {
 	int err, vol_id, lnum;
-	uint32_t leb_ver;
 	unsigned long long sqnum;
 	struct ubi_scan_volume *sv;
 	struct ubi_scan_leb *seb;
@@ -408,10 +382,9 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 	vol_id = be32_to_cpu(vid_hdr->vol_id);
 	lnum = be32_to_cpu(vid_hdr->lnum);
 	sqnum = be64_to_cpu(vid_hdr->sqnum);
-	leb_ver = be32_to_cpu(vid_hdr->leb_ver);
 
-	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, ver %u, bitflips %d",
-		pnum, vol_id, lnum, ec, sqnum, leb_ver, bitflips);
+	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, bitflips %d",
+		pnum, vol_id, lnum, ec, sqnum, bitflips);
 
 	sv = add_volume(si, vol_id, pnum, vid_hdr);
 	if (IS_ERR(sv) < 0)
@@ -444,25 +417,20 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 		 */
 
 		dbg_bld("this LEB already exists: PEB %d, sqnum %llu, "
-			"LEB ver %u, EC %d", seb->pnum, seb->sqnum,
-			seb->leb_ver, seb->ec);
-
-		/*
-		 * Make sure that the logical eraseblocks have different
-		 * versions. Otherwise the image is bad.
-		 */
-		if (seb->leb_ver == leb_ver && leb_ver != 0) {
-			ubi_err("two LEBs with same version %u", leb_ver);
-			ubi_dbg_dump_seb(seb, 0);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
-			return -EINVAL;
-		}
+			"EC %d", seb->pnum, seb->sqnum, seb->ec);
 
 		/*
 		 * Make sure that the logical eraseblocks have different
 		 * sequence numbers. Otherwise the image is bad.
 		 *
-		 * FIXME: remove 'sqnum != 0' check when leb_ver is removed.
+		 * However, if the sequence number is zero, we assume it must
+		 * be an ancient UBI image from the era when UBI did not have
+		 * sequence numbers. We still can attach these images, unless
+		 * there is a need to distinguish between old and new
+		 * eraseblocks, in which case we'll refuse the image in
+		 * 'compare_lebs()'. In other words, we attach old clean
+		 * images, but refuse attaching old images with duplicated
+		 * logical eraseblocks because there was an unclean reboot.
 		 */
 		if (seb->sqnum == sqnum && sqnum != 0) {
 			ubi_err("two LEBs with same sequence number %llu",
@@ -502,7 +470,6 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 			seb->pnum = pnum;
 			seb->scrub = ((cmp_res & 2) || bitflips);
 			seb->sqnum = sqnum;
-			seb->leb_ver = leb_ver;
 
 			if (sv->highest_lnum == lnum)
 				sv->last_data_size =
@@ -539,7 +506,6 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 	seb->lnum = lnum;
 	seb->sqnum = sqnum;
 	seb->scrub = bitflips;
-	seb->leb_ver = leb_ver;
 
 	if (sv->highest_lnum <= lnum) {
 		sv->highest_lnum = lnum;
@@ -1263,11 +1229,6 @@ static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
 				ubi_err("bad data_pad %d", sv->data_pad);
 				goto bad_vid_hdr;
 			}
-
-			if (seb->leb_ver != be32_to_cpu(vidh->leb_ver)) {
-				ubi_err("bad leb_ver %u", seb->leb_ver);
-				goto bad_vid_hdr;
-			}
 		}
 
 		if (!last_seb)
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index 4e2e3cc0bec..61df208e2f2 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -34,7 +34,6 @@
  * @u: unions RB-tree or @list links
  * @u.rb: link in the per-volume RB-tree of &struct ubi_scan_leb objects
  * @u.list: link in one of the eraseblock lists
- * @leb_ver: logical eraseblock version (obsolete)
  *
  * One object of this type is allocated for each physical eraseblock during
  * scanning.
@@ -49,7 +48,6 @@ struct ubi_scan_leb {
 		struct rb_node rb;
 		struct list_head list;
 	} u;
-	uint32_t leb_ver;
 };
 
 /**
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 26bb7af9787..2ad94040905 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -168,16 +168,15 @@ struct ubi_ec_hdr {
  *          %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
  * @vol_id: ID of this volume
  * @lnum: logical eraseblock number
- * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be
- *           removed, kept only for not breaking older UBI users)
+ * @padding1: reserved for future, zeroes
  * @data_size: how many bytes of data this logical eraseblock contains
  * @used_ebs: total number of used logical eraseblocks in this volume
  * @data_pad: how many bytes at the end of this physical eraseblock are not
  *            used
  * @data_crc: CRC checksum of the data stored in this logical eraseblock
- * @padding1: reserved for future, zeroes
- * @sqnum: sequence number
  * @padding2: reserved for future, zeroes
+ * @sqnum: sequence number
+ * @padding3: reserved for future, zeroes
  * @hdr_crc: volume identifier header CRC checksum
  *
  * The @sqnum is the value of the global sequence counter at the time when this
@@ -225,10 +224,6 @@ struct ubi_ec_hdr {
  * checksum is correct, this physical eraseblock is selected (P1). Otherwise
  * the older one (P) is selected.
  *
- * Note, there is an obsolete @leb_ver field which was used instead of @sqnum
- * in the past. But it is not used anymore and we keep it in order to be able
- * to deal with old UBI images. It will be removed at some point.
- *
  * There are 2 sorts of volumes in UBI: user volumes and internal volumes.
  * Internal volumes are not seen from outside and are used for various internal
  * UBI purposes. In this implementation there is only one internal volume - the
@@ -278,14 +273,14 @@ struct ubi_vid_hdr {
 	__u8    compat;
 	__be32  vol_id;
 	__be32  lnum;
-	__be32  leb_ver; /* obsolete, to be removed, don't use */
+	__u8    padding1[4];
 	__be32  data_size;
 	__be32  used_ebs;
 	__be32  data_pad;
 	__be32  data_crc;
-	__u8    padding1[4];
+	__u8    padding2[4];
 	__be64  sqnum;
-	__u8    padding2[12];
+	__u8    padding3[12];
 	__be32  hdr_crc;
 } __attribute__ ((packed));
 
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 4e1c489a3ba..217d0e111b2 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -338,7 +338,6 @@ retry:
 			     vid_hdr->data_pad = cpu_to_be32(0);
 	vid_hdr->lnum = cpu_to_be32(copy);
 	vid_hdr->sqnum = cpu_to_be64(++si->max_sqnum);
-	vid_hdr->leb_ver = cpu_to_be32(old_seb ? old_seb->leb_ver + 1: 0);
 
 	/* The EC header is already there, write the VID header */
 	err = ubi_io_write_vid_hdr(ubi, new_seb->pnum, vid_hdr);
-- 
cgit v1.2.3


From eeb16e87b6747c9a4f5769f33467c9d173e9f5ee Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 23 Jul 2008 15:51:46 +0300
Subject: UBI: fix gcc warning

Fix the following warning:

drivers/mtd/ubi/vmt.c: In function 'ubi_rename_volumes':
drivers/mtd/ubi/vmt.c:642: warning: statement with no effect

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/vmt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index d40066833ab..3531ca9a1e2 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -639,7 +639,7 @@ int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list)
 	}
 
 	if (!err)
-		paranoid_check_volumes(ubi);
+		err = paranoid_check_volumes(ubi);
 	return err;
 }
 
-- 
cgit v1.2.3


From 9d25d4db81833029d30b7b03cc1000cbbe09e192 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Mon, 21 Jul 2008 18:41:26 +0100
Subject: x86: BUILD_IRQ say .text to avoid .data.percpu

When I edit the x86_64 Makefile to -fno-unit-at-a-time, bootup panics
on 0xCCs in IRQ0x3e_interrupt(): IRQ0x20_interrupt etc. have got linked
into .data.percpu.  Perhaps there are other ways of triggering that:
specify ".text" in the BUILD_IRQ() macro for safety.

I've been using -fno-unit-at-a-time (to lessen inlining, for easier
debugging) for a long time.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/irqinit_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index 0373e88de95..9414125f19c 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -43,7 +43,7 @@
 
 #define BUILD_IRQ(nr)				\
 	asmlinkage void IRQ_NAME(nr);		\
-	asm("\n.p2align\n"			\
+	asm("\n.text\n.p2align\n"		\
 	    "IRQ" #nr "_interrupt:\n\t"		\
 	    "push $~(" #nr ") ; "		\
 	    "jmp common_interrupt");
-- 
cgit v1.2.3


From 04bbe430f73c6c31bbd067349c029e907e153a8d Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Mon, 21 Jul 2008 15:06:35 +0200
Subject: x86: fix header export, asm-x86/processor-flags.h, CONFIG_* leaks

Apparently,

commit 6330a30a76c1e62d4b4ec238368957f8febf9113
Author: Vegard Nossum <vegard.nossum@gmail.com>
Date:   Wed May 28 09:46:19 2008 +0200

    x86: break mutual header inclusion

introduced some CONFIG names to processor-flags.h, which was exported in

commit 6093015db2bd9e70cf20cdd23be1a50733baafdd
Author: Ingo Molnar <mingo@elte.hu>
Date:   Sun Mar 30 11:45:23 2008 +0200

    x86: cleanup replace most vm86 flags with flags from processor-flags.h, fix

Fix it by wrapping the CONFIG parts in __KERNEL__.

Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/asm-x86/processor-flags.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h
index 092b39b3a7e..eff2ecd7fff 100644
--- a/include/asm-x86/processor-flags.h
+++ b/include/asm-x86/processor-flags.h
@@ -88,10 +88,12 @@
 #define CX86_ARR_BASE	0xc4
 #define CX86_RCR_BASE	0xdc
 
+#ifdef __KERNEL__
 #ifdef CONFIG_VM86
 #define X86_VM_MASK	X86_EFLAGS_VM
 #else
 #define X86_VM_MASK	0 /* No VM86 support */
 #endif
+#endif
 
 #endif	/* __ASM_I386_PROCESSOR_FLAGS_H */
-- 
cgit v1.2.3


From 58838cf3ca3337d76141c33d6c68376490263468 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu, 24 Jul 2008 12:43:13 +0200
Subject: sched: clean up compiler warning

Reported-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_rt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 147004c651c..93ac8ee0827 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -253,7 +253,7 @@ static int do_balance_runtime(struct rt_rq *rt_rq)
 
 		diff = iter->rt_runtime - iter->rt_time;
 		if (diff > 0) {
-			do_div(diff, weight);
+			diff = div_u64((u64)diff, weight);
 			if (rt_rq->rt_runtime + diff > rt_period)
 				diff = rt_period - rt_rq->rt_runtime;
 			iter->rt_runtime -= diff;
-- 
cgit v1.2.3


From 218df4a25a9b828df4bb44c86e35febe40c82e62 Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Date: Tue, 1 Jul 2008 14:26:45 +0200
Subject: avr32: Add platform data for AC97C platform device

This patch adds platform data to the AC97C platform device. This will
let the board add a GPIO line which is connected to the external codecs
reset line.

The platform data, ac97c_platform_data, must also contain the DMA
controller ID, RX channel ID and TX channel ID.

Tested with Wolfson WM9712 and AP7000.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/at32ap700x.c   | 34 +++++++++++++++++++++++++++-------
 include/asm-avr32/arch-at32ap/board.h | 10 +++++++++-
 2 files changed, 36 insertions(+), 8 deletions(-)

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 4ac38d28891..30c7cdab28d 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1883,9 +1883,11 @@ static struct clk atmel_ac97c0_pclk = {
 	.index		= 10,
 };
 
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+struct platform_device *__init
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 {
 	struct platform_device *pdev;
+	struct ac97c_platform_data _data;
 
 	if (id != 0)
 		return NULL;
@@ -1896,19 +1898,37 @@ struct platform_device *__init at32_add_device_ac97c(unsigned int id)
 
 	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
 				ARRAY_SIZE(atmel_ac97c0_resource)))
-		goto err_add_resources;
+		goto fail;
+
+	if (!data) {
+		data = &_data;
+		memset(data, 0, sizeof(struct ac97c_platform_data));
+		data->reset_pin = GPIO_PIN_NONE;
+	}
+
+	data->dma_rx_periph_id = 3;
+	data->dma_tx_periph_id = 4;
+	data->dma_controller_id = 0;
 
-	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct ac97c_platform_data)))
+		goto fail;
+
+	select_peripheral(PB(20), PERIPH_B, 0);	/* SDO	*/
+	select_peripheral(PB(21), PERIPH_B, 0);	/* SYNC	*/
+	select_peripheral(PB(22), PERIPH_B, 0);	/* SCLK	*/
+	select_peripheral(PB(23), PERIPH_B, 0);	/* SDI	*/
+
+	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
+	if (data->reset_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->reset_pin, 0);
 
 	atmel_ac97c0_pclk.dev = &pdev->dev;
 
 	platform_device_add(pdev);
 	return pdev;
 
-err_add_resources:
+fail:
 	platform_device_put(pdev);
 	return NULL;
 }
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index a3783861cdd..203cb4ead2c 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -82,7 +82,15 @@ struct mci_platform_data;
 struct platform_device *
 at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
 
-struct platform_device *at32_add_device_ac97c(unsigned int id);
+struct ac97c_platform_data {
+	unsigned short dma_rx_periph_id;
+	unsigned short dma_tx_periph_id;
+	unsigned short dma_controller_id;
+	int reset_pin;
+};
+struct platform_device *
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
+
 struct platform_device *at32_add_device_abdac(unsigned int id);
 struct platform_device *at32_add_device_psif(unsigned int id);
 
-- 
cgit v1.2.3


From db6ea2c17cef531a58f48c51c3a0892edcaf1380 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 21 Jun 2008 22:30:43 +0800
Subject: drivers/misc/atmel-ssc.c: Removed duplicated include

Removed duplicated include file <linux/list.h> in
drivers/misc/atmel-ssc.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 drivers/misc/atmel-ssc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index e171650766c..bf5e4d06543 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/atmel-ssc.h>
 
-- 
cgit v1.2.3


From 78305de2f99e9f43ab860dd95bb430b20e26c695 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Wed, 23 Apr 2008 07:20:41 -0400
Subject: Remove mention of semaphores from kernel-locking

Since the consensus seems to be to eliminate semaphores where possible,
we shouldn't be educating people about how to use them as locks.  Use
mutexes instead.  Semaphores should be described in a separate document
if we end up keeping them.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
---
 Documentation/DocBook/kernel-locking.tmpl | 57 +++++++++++++------------------
 1 file changed, 24 insertions(+), 33 deletions(-)

diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 2510763295d..084f6ad7b7a 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -219,10 +219,10 @@
    </para>
 
    <sect1 id="lock-intro">
-   <title>Three Main Types of Kernel Locks: Spinlocks, Mutexes and Semaphores</title>
+   <title>Two Main Types of Kernel Locks: Spinlocks and Mutexes</title>
 
    <para>
-     There are three main types of kernel locks.  The fundamental type
+     There are two main types of kernel locks.  The fundamental type
      is the spinlock 
      (<filename class="headerfile">include/asm/spinlock.h</filename>),
      which is a very simple single-holder lock: if you can't get the 
@@ -239,14 +239,6 @@
      can't sleep (see <xref linkend="sleeping-things"/>), and so have to
      use a spinlock instead.
    </para>
-   <para>
-     The third type is a semaphore
-     (<filename class="headerfile">include/linux/semaphore.h</filename>): it
-     can have more than one holder at any time (the number decided at
-     initialization time), although it is most commonly used as a
-     single-holder lock (a mutex).  If you can't get a semaphore, your
-     task will be suspended and later on woken up - just like for mutexes.
-   </para>
    <para>
      Neither type of lock is recursive: see
      <xref linkend="deadlock"/>.
@@ -278,7 +270,7 @@
     </para>
 
     <para>
-      Semaphores still exist, because they are required for
+      Mutexes still exist, because they are required for
       synchronization between <firstterm linkend="gloss-usercontext">user 
       contexts</firstterm>, as we will see below.
     </para>
@@ -289,18 +281,17 @@
 
      <para>
        If you have a data structure which is only ever accessed from
-       user context, then you can use a simple semaphore
-       (<filename>linux/linux/semaphore.h</filename>) to protect it.  This
-       is the most trivial case: you initialize the semaphore to the number 
-       of resources available (usually 1), and call
-       <function>down_interruptible()</function> to grab the semaphore, and 
-       <function>up()</function> to release it.  There is also a 
-       <function>down()</function>, which should be avoided, because it 
+       user context, then you can use a simple mutex
+       (<filename>include/linux/mutex.h</filename>) to protect it.  This
+       is the most trivial case: you initialize the mutex.  Then you can
+       call <function>mutex_lock_interruptible()</function> to grab the mutex,
+       and <function>mutex_unlock()</function> to release it.  There is also a 
+       <function>mutex_lock()</function>, which should be avoided, because it 
        will not return if a signal is received.
      </para>
 
      <para>
-       Example: <filename>linux/net/core/netfilter.c</filename> allows 
+       Example: <filename>net/netfilter/nf_sockopt.c</filename> allows 
        registration of new <function>setsockopt()</function> and 
        <function>getsockopt()</function> calls, with
        <function>nf_register_sockopt()</function>.  Registration and 
@@ -515,7 +506,7 @@
       <listitem>
 	<para>
           If you are in a process context (any syscall) and want to
-	lock other process out, use a semaphore.  You can take a semaphore
+	lock other process out, use a mutex.  You can take a mutex
 	and sleep (<function>copy_from_user*(</function> or
 	<function>kmalloc(x,GFP_KERNEL)</function>).
       </para>
@@ -662,7 +653,7 @@
 <entry>SLBH</entry>
 <entry>SLBH</entry>
 <entry>SLBH</entry>
-<entry>DI</entry>
+<entry>MLI</entry>
 <entry>None</entry>
 </row>
 
@@ -692,8 +683,8 @@
 <entry>spin_lock_bh</entry>
 </row>
 <row>
-<entry>DI</entry>
-<entry>down_interruptible</entry>
+<entry>MLI</entry>
+<entry>mutex_lock_interruptible</entry>
 </row>
 
 </tbody>
@@ -1310,7 +1301,7 @@ as Alan Cox says, <quote>Lock data, not code</quote>.
     <para>
       There is a coding bug where a piece of code tries to grab a
       spinlock twice: it will spin forever, waiting for the lock to
-      be released (spinlocks, rwlocks and semaphores are not
+      be released (spinlocks, rwlocks and mutexes are not
       recursive in Linux).  This is trivial to diagnose: not a
       stay-up-five-nights-talk-to-fluffy-code-bunnies kind of
       problem.
@@ -1335,7 +1326,7 @@ as Alan Cox says, <quote>Lock data, not code</quote>.
 
     <para>
       This complete lockup is easy to diagnose: on SMP boxes the
-      watchdog timer or compiling with <symbol>DEBUG_SPINLOCKS</symbol> set
+      watchdog timer or compiling with <symbol>DEBUG_SPINLOCK</symbol> set
       (<filename>include/linux/spinlock.h</filename>) will show this up 
       immediately when it happens.
     </para>
@@ -1558,7 +1549,7 @@ the amount of locking which needs to be done.
    <title>Read/Write Lock Variants</title>
 
    <para>
-      Both spinlocks and semaphores have read/write variants:
+      Both spinlocks and mutexes have read/write variants:
       <type>rwlock_t</type> and <structname>struct rw_semaphore</structname>.
       These divide users into two classes: the readers and the writers.  If
       you are only reading the data, you can get a read lock, but to write to
@@ -1681,7 +1672,7 @@ the amount of locking which needs to be done.
  #include &lt;linux/slab.h&gt;
  #include &lt;linux/string.h&gt;
 +#include &lt;linux/rcupdate.h&gt;
- #include &lt;linux/semaphore.h&gt;
+ #include &lt;linux/mutex.h&gt;
  #include &lt;asm/errno.h&gt;
 
  struct object
@@ -1913,7 +1904,7 @@ machines due to caching.
        </listitem>
        <listitem>
         <para>
-          <function> put_user()</function>
+          <function>put_user()</function>
         </para>
        </listitem>
       </itemizedlist>
@@ -1927,13 +1918,13 @@ machines due to caching.
 
      <listitem>
       <para>
-      <function>down_interruptible()</function> and
-      <function>down()</function>
+      <function>mutex_lock_interruptible()</function> and
+      <function>mutex_lock()</function>
       </para>
       <para>
-       There is a <function>down_trylock()</function> which can be
+       There is a <function>mutex_trylock()</function> which can be
        used inside interrupt context, as it will not sleep.
-       <function>up()</function> will also never sleep.
+       <function>mutex_unlock()</function> will also never sleep.
       </para>
      </listitem>
     </itemizedlist>
@@ -2023,7 +2014,7 @@ machines due to caching.
       <para>
         Prior to 2.5, or when <symbol>CONFIG_PREEMPT</symbol> is
         unset, processes in user context inside the kernel would not
-        preempt each other (ie. you had that CPU until you have it up,
+        preempt each other (ie. you had that CPU until you gave it up,
         except for interrupts).  With the addition of
         <symbol>CONFIG_PREEMPT</symbol> in 2.5.4, this changed: when
         in user context, higher priority tasks can "cut in": spinlocks
-- 
cgit v1.2.3


From 0f17e4c796e89d1f69f13b653aba60e6ccfb8ae0 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Thu, 24 Jul 2008 08:30:48 -0400
Subject: Add missing semaphore.h includes

These files use semaphores but don't include semaphore.h

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/input/keyboard/hil_kbd.c | 1 +
 drivers/input/misc/hp_sdc_rtc.c  | 1 +
 drivers/input/serio/hp_sdc.c     | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index adbf29f0169..71c1971abf8 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -37,6 +37,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/semaphore.h>
 #include <linux/slab.h>
 #include <linux/pci_ids.h>
 
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index 49d8abfe38f..daa9d422033 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -44,6 +44,7 @@
 #include <linux/proc_fs.h>
 #include <linux/poll.h>
 #include <linux/rtc.h>
+#include <linux/semaphore.h>
 
 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
 MODULE_DESCRIPTION("HP i8042 SDC + MSM-58321 RTC Driver");
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 7b233a492ad..aad664d5259 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -67,6 +67,7 @@
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/time.h>
+#include <linux/semaphore.h>
 #include <linux/slab.h>
 #include <linux/hil.h>
 #include <linux/semaphore.h>
-- 
cgit v1.2.3


From 6310e472717ed736c9bff9840febb71f7bb400ed Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Thu, 24 Jul 2008 08:08:09 -0400
Subject: Remove use of asm/semaphore.h

Change to use linux/semaphore.h

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
---
 arch/arm/mach-ns9xxx/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
index f8639161068..44ed20d4a38 100644
--- a/arch/arm/mach-ns9xxx/clock.c
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/semaphore.h>
 
-#include <asm/semaphore.h>
 #include "clock.h"
 
 static LIST_HEAD(clocks);
-- 
cgit v1.2.3


From 2351ec533ed0dd56052ab96988d2161d5ecc8ed9 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Thu, 24 Jul 2008 08:09:32 -0400
Subject: Remove asm/semaphore.h

All users have now been converted to linux/semaphore.h and we don't need
to keep these files around any longer.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
---
 Documentation/feature-removal-schedule.txt | 8 --------
 include/asm-alpha/semaphore.h              | 1 -
 include/asm-arm/semaphore.h                | 1 -
 include/asm-avr32/semaphore.h              | 1 -
 include/asm-blackfin/semaphore.h           | 1 -
 include/asm-cris/semaphore.h               | 1 -
 include/asm-frv/semaphore.h                | 1 -
 include/asm-h8300/semaphore.h              | 1 -
 include/asm-ia64/semaphore.h               | 1 -
 include/asm-m32r/semaphore.h               | 1 -
 include/asm-m68k/semaphore.h               | 1 -
 include/asm-m68knommu/semaphore.h          | 1 -
 include/asm-mips/semaphore.h               | 1 -
 include/asm-mn10300/semaphore.h            | 1 -
 include/asm-parisc/semaphore.h             | 1 -
 include/asm-powerpc/semaphore.h            | 1 -
 include/asm-s390/semaphore.h               | 1 -
 include/asm-sh/semaphore.h                 | 1 -
 include/asm-sparc/semaphore.h              | 1 -
 include/asm-sparc64/semaphore.h            | 1 -
 include/asm-um/semaphore.h                 | 1 -
 include/asm-v850/semaphore.h               | 1 -
 include/asm-x86/semaphore.h                | 1 -
 include/asm-xtensa/semaphore.h             | 1 -
 24 files changed, 31 deletions(-)
 delete mode 100644 include/asm-alpha/semaphore.h
 delete mode 100644 include/asm-arm/semaphore.h
 delete mode 100644 include/asm-avr32/semaphore.h
 delete mode 100644 include/asm-blackfin/semaphore.h
 delete mode 100644 include/asm-cris/semaphore.h
 delete mode 100644 include/asm-frv/semaphore.h
 delete mode 100644 include/asm-h8300/semaphore.h
 delete mode 100644 include/asm-ia64/semaphore.h
 delete mode 100644 include/asm-m32r/semaphore.h
 delete mode 100644 include/asm-m68k/semaphore.h
 delete mode 100644 include/asm-m68knommu/semaphore.h
 delete mode 100644 include/asm-mips/semaphore.h
 delete mode 100644 include/asm-mn10300/semaphore.h
 delete mode 100644 include/asm-parisc/semaphore.h
 delete mode 100644 include/asm-powerpc/semaphore.h
 delete mode 100644 include/asm-s390/semaphore.h
 delete mode 100644 include/asm-sh/semaphore.h
 delete mode 100644 include/asm-sparc/semaphore.h
 delete mode 100644 include/asm-sparc64/semaphore.h
 delete mode 100644 include/asm-um/semaphore.h
 delete mode 100644 include/asm-v850/semaphore.h
 delete mode 100644 include/asm-x86/semaphore.h
 delete mode 100644 include/asm-xtensa/semaphore.h

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 9f73587219e..09c4a1efb8e 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -300,14 +300,6 @@ Who:	ocfs2-devel@oss.oracle.com
 
 ---------------------------
 
-What:	asm/semaphore.h
-When:	2.6.26
-Why:	Implementation became generic; users should now include
-	linux/semaphore.h instead.
-Who:	Matthew Wilcox <willy@linux.intel.com>
-
----------------------------
-
 What:	SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
 	SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
 When: 	June 2009
diff --git a/include/asm-alpha/semaphore.h b/include/asm-alpha/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-alpha/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-arm/semaphore.h b/include/asm-arm/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-arm/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-avr32/semaphore.h b/include/asm-avr32/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-avr32/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-blackfin/semaphore.h b/include/asm-blackfin/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-blackfin/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-cris/semaphore.h b/include/asm-cris/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-cris/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-frv/semaphore.h b/include/asm-frv/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-frv/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-h8300/semaphore.h b/include/asm-h8300/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-h8300/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-ia64/semaphore.h b/include/asm-ia64/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-ia64/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-m32r/semaphore.h b/include/asm-m32r/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-m32r/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-m68k/semaphore.h b/include/asm-m68k/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-m68k/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-m68knommu/semaphore.h b/include/asm-m68knommu/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-m68knommu/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-mips/semaphore.h b/include/asm-mips/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-mips/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-mn10300/semaphore.h b/include/asm-mn10300/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-mn10300/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-parisc/semaphore.h b/include/asm-parisc/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-parisc/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-powerpc/semaphore.h b/include/asm-powerpc/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-powerpc/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-s390/semaphore.h b/include/asm-s390/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-s390/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-sh/semaphore.h b/include/asm-sh/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-sh/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-sparc/semaphore.h b/include/asm-sparc/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-sparc/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-sparc64/semaphore.h b/include/asm-sparc64/semaphore.h
deleted file mode 100644
index 39362afde5f..00000000000
--- a/include/asm-sparc64/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/semaphore.h>
diff --git a/include/asm-um/semaphore.h b/include/asm-um/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-um/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-v850/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-x86/semaphore.h b/include/asm-x86/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-x86/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-xtensa/semaphore.h b/include/asm-xtensa/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-xtensa/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
-- 
cgit v1.2.3


From b552068999b0b05087c454e525b30b785c79dc9b Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Wed, 23 Apr 2008 10:07:27 -0400
Subject: Remove __DECLARE_SEMAPHORE_GENERIC

There are no users of __DECLARE_SEMAPHORE_GENERIC in the kernel

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
---
 include/linux/semaphore.h | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/include/linux/semaphore.h b/include/linux/semaphore.h
index 9cae64b00d6..7415839ac89 100644
--- a/include/linux/semaphore.h
+++ b/include/linux/semaphore.h
@@ -26,10 +26,8 @@ struct semaphore {
 	.wait_list	= LIST_HEAD_INIT((name).wait_list),		\
 }
 
-#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
-	struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
-
-#define DECLARE_MUTEX(name)	__DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX(name)	\
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1)
 
 static inline void sema_init(struct semaphore *sem, int val)
 {
-- 
cgit v1.2.3


From 76c510ad2e7d56cfe8f2cc7b23783e5c687cf704 Mon Sep 17 00:00:00 2001
From: Shirish Pargaonkar <shirishp@gmail.com>
Date: Thu, 24 Jul 2008 14:48:33 +0000
Subject: [CIFS] Fix possible double free if search immediately after search
 rewind fails

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/readdir.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 83f30695488..5f40ed3473f 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -690,6 +690,7 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon,
 			else
 				cifs_buf_release(cifsFile->srch_inf.
 						ntwrk_buf_start);
+			cifsFile->srch_inf.ntwrk_buf_start = NULL;
 		}
 		rc = initiate_cifs_search(xid, file);
 		if (rc) {
-- 
cgit v1.2.3


From b1910ad6222a705650dc991c003af43b94cdb3e1 Mon Sep 17 00:00:00 2001
From: Shirish Pargaonkar <shirishp@gmail.com>
Date: Thu, 24 Jul 2008 14:53:20 +0000
Subject: [CIFS] Fix improper endian conversion of ACL subauth field

In mode_to_acl when converting a Unix mode to a Windows ACL
the subauth fields of the SID in the ACL were translated
incorrectly on bigendian architectures

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsacl.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 0e9fc2ba90e..18faf65b911 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -169,8 +169,7 @@ static void copy_sec_desc(const struct cifs_ntsd *pntsd,
 	for (i = 0; i < 6; i++)
 		ngroup_sid_ptr->authority[i] = group_sid_ptr->authority[i];
 	for (i = 0; i < 5; i++)
-		ngroup_sid_ptr->sub_auth[i] =
-				cpu_to_le32(group_sid_ptr->sub_auth[i]);
+		ngroup_sid_ptr->sub_auth[i] = group_sid_ptr->sub_auth[i];
 
 	return;
 }
-- 
cgit v1.2.3


From ef571cadd516e7ffcdeac6bb8054e5908fcccfcf Mon Sep 17 00:00:00 2001
From: Shirish Pargaonkar <shirishp@gmail.com>
Date: Thu, 24 Jul 2008 15:56:05 +0000
Subject: [CIFS] Fix warnings from checkpatch

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_debug.c  |  4 ++--
 fs/cifs/cifsacl.c     | 38 +++++++++++++++++++-------------------
 fs/cifs/cifsencrypt.c |  3 +--
 fs/cifs/cifsglob.h    |  6 +++---
 fs/cifs/cifspdu.h     |  8 ++++----
 fs/cifs/cifssmb.c     |  5 ++---
 6 files changed, 31 insertions(+), 33 deletions(-)

diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index c213aa40064..688a2d42153 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -208,9 +208,9 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v)
 			seq_puts(m, " type: CDROM ");
 		else
 			seq_printf(m, " type: %d ", dev_type);
-		if (tcon->tidStatus == CifsNeedReconnect) {
+
+		if (tcon->tidStatus == CifsNeedReconnect)
 			seq_puts(m, "\tDISCONNECTED ");
-		}
 	}
 	read_unlock(&GlobalSMBSeslock);
 
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 18faf65b911..57ecdc83c26 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -56,7 +56,7 @@ int match_sid(struct cifs_sid *ctsid)
 	struct cifs_sid *cwsid;
 
 	if (!ctsid)
-		return (-1);
+		return -1;
 
 	for (i = 0; i < NUM_WK_SIDS; ++i) {
 		cwsid = &(wksidarr[i].cifssid);
@@ -87,11 +87,11 @@ int match_sid(struct cifs_sid *ctsid)
 		}
 
 		cFYI(1, ("matching sid: %s\n", wksidarr[i].sidname));
-		return (0); /* sids compare/match */
+		return 0; /* sids compare/match */
 	}
 
 	cFYI(1, ("No matching sid"));
-	return (-1);
+	return -1;
 }
 
 /* if the two SIDs (roughly equivalent to a UUID for a user or group) are
@@ -102,16 +102,16 @@ int compare_sids(const struct cifs_sid *ctsid, const struct cifs_sid *cwsid)
 	int num_subauth, num_sat, num_saw;
 
 	if ((!ctsid) || (!cwsid))
-		return (0);
+		return 0;
 
 	/* compare the revision */
 	if (ctsid->revision != cwsid->revision)
-		return (0);
+		return 0;
 
 	/* compare all of the six auth values */
 	for (i = 0; i < 6; ++i) {
 		if (ctsid->authority[i] != cwsid->authority[i])
-			return (0);
+			return 0;
 	}
 
 	/* compare all of the subauth values if any */
@@ -121,11 +121,11 @@ int compare_sids(const struct cifs_sid *ctsid, const struct cifs_sid *cwsid)
 	if (num_subauth) {
 		for (i = 0; i < num_subauth; ++i) {
 			if (ctsid->sub_auth[i] != cwsid->sub_auth[i])
-				return (0);
+				return 0;
 		}
 	}
 
-	return (1); /* sids compare/match */
+	return 1; /* sids compare/match */
 }
 
 
@@ -284,7 +284,7 @@ static __u16 fill_ace_for_sid(struct cifs_ace *pntace,
 	size = 1 + 1 + 2 + 4 + 1 + 1 + 6 + (psid->num_subauth * 4);
 	pntace->size = cpu_to_le16(size);
 
-	return (size);
+	return size;
 }
 
 
@@ -425,7 +425,7 @@ static int set_chmod_dacl(struct cifs_acl *pndacl, struct cifs_sid *pownersid,
 	pndacl->size = cpu_to_le16(size + sizeof(struct cifs_acl));
 	pndacl->num_aces = cpu_to_le32(3);
 
-	return (0);
+	return 0;
 }
 
 
@@ -509,7 +509,7 @@ static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
 			sizeof(struct cifs_sid)); */
 
 
-	return (0);
+	return 0;
 }
 
 
@@ -526,7 +526,7 @@ static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd,
 	struct cifs_acl *ndacl_ptr = NULL; /* no need for SACL ptr */
 
 	if ((inode == NULL) || (pntsd == NULL) || (pnntsd == NULL))
-		return (-EIO);
+		return -EIO;
 
 	owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
 				le32_to_cpu(pntsd->osidoffset));
@@ -549,7 +549,7 @@ static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd,
 	/* copy security descriptor control portion and owner and group sid */
 	copy_sec_desc(pntsd, pnntsd, sidsoffset);
 
-	return (rc);
+	return rc;
 }
 
 
@@ -628,11 +628,11 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 	cFYI(DBG2, ("set ACL for %s from mode 0x%x", path, inode->i_mode));
 
 	if (!inode)
-		return (rc);
+		return rc;
 
 	sb = inode->i_sb;
 	if (sb == NULL)
-		return (rc);
+		return rc;
 
 	cifs_sb = CIFS_SB(sb);
 	xid = GetXid();
@@ -651,7 +651,7 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 		if (rc != 0) {
 			cERROR(1, ("Unable to open file to set ACL"));
 			FreeXid(xid);
-			return (rc);
+			return rc;
 		}
 	}
 
@@ -664,7 +664,7 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 
 	FreeXid(xid);
 
-	return (rc);
+	return rc;
 }
 
 /* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
@@ -714,7 +714,7 @@ int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
 		if (!pnntsd) {
 			cERROR(1, ("Unable to allocate security descriptor"));
 			kfree(pntsd);
-			return (-ENOMEM);
+			return -ENOMEM;
 		}
 
 		rc = build_sec_desc(pntsd, pnntsd, inode, nmode);
@@ -731,6 +731,6 @@ int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
 		kfree(pntsd);
 	}
 
-	return (rc);
+	return rc;
 }
 #endif /* CONFIG_CIFS_EXPERIMENTAL */
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 4ff8939c6cc..83fd40dc1ef 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -310,9 +310,8 @@ void calc_lanman_hash(struct cifsSesInfo *ses, char *lnm_session_key)
 	utf8 and other multibyte codepages each need their own strupper
 	function since a byte at a time will ont work. */
 
-	for (i = 0; i < CIFS_ENCPWD_SIZE; i++) {
+	for (i = 0; i < CIFS_ENCPWD_SIZE; i++)
 		password_with_pad[i] = toupper(password_with_pad[i]);
-	}
 
 	SMBencrypt(password_with_pad, ses->server->cryptKey, lnm_session_key);
 	/* clear password before we return/free memory */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 9cfcf326ead..7e1cf262eff 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -27,7 +27,7 @@
 #define MAX_SES_INFO 2
 #define MAX_TCON_INFO 4
 
-#define MAX_TREE_SIZE 2 + MAX_SERVER_SIZE + 1 + MAX_SHARE_SIZE + 1
+#define MAX_TREE_SIZE (2 + MAX_SERVER_SIZE + 1 + MAX_SHARE_SIZE + 1)
 #define MAX_SERVER_SIZE 15
 #define MAX_SHARE_SIZE  64	/* used to be 20, this should still be enough */
 #define MAX_USERNAME_SIZE 32	/* 32 is to allow for 15 char names + null
@@ -537,8 +537,8 @@ require use of the stronger protocol */
 #endif /* WEAK_PW_HASH */
 #define   CIFSSEC_MUST_SEAL	0x40040 /* not supported yet */
 
-#define   CIFSSEC_DEF  CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2
-#define   CIFSSEC_MAX  CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2
+#define   CIFSSEC_DEF (CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2)
+#define   CIFSSEC_MAX (CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2)
 #define   CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5)
 /*
  *****************************************************************
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index 0f327c224da..409abce1273 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -31,7 +31,7 @@
 #else
 #define CIFS_PROT   0
 #endif
-#define POSIX_PROT  CIFS_PROT+1
+#define POSIX_PROT  (CIFS_PROT+1)
 #define BAD_PROT 0xFFFF
 
 /* SMB command codes */
@@ -341,7 +341,7 @@
 #define CREATE_COMPLETE_IF_OPLK 0x00000100	/* should be zero */
 #define CREATE_NO_EA_KNOWLEDGE  0x00000200
 #define CREATE_EIGHT_DOT_THREE  0x00000400	/* doc says this is obsolete
-						 "open for recovery" flag - should
+						 "open for recovery" flag should
 						 be zero in any case */
 #define CREATE_OPEN_FOR_RECOVERY 0x00000400
 #define CREATE_RANDOM_ACCESS	0x00000800
@@ -414,8 +414,8 @@ struct smb_hdr {
 	__u8 WordCount;
 } __attribute__((packed));
 /* given a pointer to an smb_hdr retrieve the value of byte count */
-#define BCC(smb_var) ( *(__u16 *)((char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount)))
-#define BCC_LE(smb_var) ( *(__le16 *)((char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount)))
+#define BCC(smb_var) (*(__u16 *)((char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount)))
+#define BCC_LE(smb_var) (*(__le16 *)((char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount)))
 /* given a pointer to an smb_hdr retrieve the pointer to the byte area */
 #define pByteArea(smb_var) ((unsigned char *)smb_var + sizeof(struct smb_hdr) + (2 * smb_var->WordCount) + 2)
 
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 7e175e1399d..c621ffa2ca9 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -686,11 +686,10 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 						 SecurityBlob,
 						 count - 16,
 						 &server->secType);
-			if (rc == 1) {
+			if (rc == 1)
 				rc = 0;
-			} else {
+			else
 				rc = -EINVAL;
-			}
 		}
 	} else
 		server->capabilities &= ~CAP_EXTENDED_SECURITY;
-- 
cgit v1.2.3


From e108526e77aa41c89b3be96f75d97615db2b751c Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Wed, 23 Jul 2008 21:26:44 -0700
Subject: move memory_read_from_buffer() from fs.h to string.h

James Bottomley warns that inclusion of linux/fs.h in a low level
driver was always a danger signal.  This patch moves
memory_read_from_buffer() from fs.h to string.h and fixes includes in
existing memory_read_from_buffer() users.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/acpi/system.c       | 1 +
 drivers/zorro/zorro-sysfs.c | 1 -
 include/linux/fs.h          | 2 --
 include/linux/string.h      | 3 +++
 4 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index d8e3f153b29..91dec448b3e 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -26,6 +26,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
+#include <linux/string.h>
 #include <asm/uaccess.h>
 
 #include <acpi/acpi_drivers.h>
diff --git a/drivers/zorro/zorro-sysfs.c b/drivers/zorro/zorro-sysfs.c
index 3da712cc770..5290552d2ef 100644
--- a/drivers/zorro/zorro-sysfs.c
+++ b/drivers/zorro/zorro-sysfs.c
@@ -15,7 +15,6 @@
 #include <linux/zorro.h>
 #include <linux/stat.h>
 #include <linux/string.h>
-#include <linux/fs.h>
 
 #include "zorro.h"
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 9c2ac5c0ef5..ff54ae4933f 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2006,8 +2006,6 @@ extern void simple_release_fs(struct vfsmount **mount, int *count);
 
 extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
 			loff_t *ppos, const void *from, size_t available);
-extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
-			const void *from, size_t available);
 
 #ifdef CONFIG_MIGRATION
 extern int buffer_migrate_page(struct address_space *,
diff --git a/include/linux/string.h b/include/linux/string.h
index efdc44593b5..810d80df0a1 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -111,5 +111,8 @@ extern void argv_free(char **argv);
 
 extern bool sysfs_streq(const char *s1, const char *s2);
 
+extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+			const void *from, size_t available);
+
 #endif
 #endif /* _LINUX_STRING_H_ */
-- 
cgit v1.2.3


From d36e74c4392b5f26a5c4d94d7881a156ddc8e593 Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Wed, 23 Jul 2008 21:26:46 -0700
Subject: hpet: clarify maintainer entry

The existing HPET maintainer entries are somewhat unclear about which one
applies to what part of the kernel.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 5d8971c76a7..7ffd78c4e27 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1984,7 +1984,7 @@ P:	Carlos Corbacho
 M:	carlos@strangeworlds.co.uk
 S:	Odd Fixes
 
-HPET:	High Precision Event Timers driver (hpet.c)
+HPET:	High Precision Event Timers driver (drivers/char/hpet.c)
 P:	Clemens Ladisch
 M:	clemens@ladisch.de
 S:	Maintained
-- 
cgit v1.2.3


From d7ce20b2024d318b9ba88859226af1441270d99f Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:26:47 -0700
Subject: remove is_tty()

This patch removes the no longer used is_tty().

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tty_io.c | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index fa48dba5ba5..6f4d856df98 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1119,19 +1119,6 @@ int tty_hung_up_p(struct file *filp)
 
 EXPORT_SYMBOL(tty_hung_up_p);
 
-/**
- *	is_tty	-	checker whether file is a TTY
- *	@filp:		file handle that may be a tty
- *
- *	Check if the file handle is a tty handle.
- */
-
-int is_tty(struct file *filp)
-{
-	return filp->f_op->read == tty_read
-		|| filp->f_op->read == hung_up_tty_read;
-}
-
 static void session_clear_tty(struct pid *session)
 {
 	struct task_struct *p;
-- 
cgit v1.2.3


From 9483a578df27fe7603605d565eefe039c1ba5845 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Wed, 23 Jul 2008 21:26:48 -0700
Subject: add HAVE_CLK to Kconfig, for driver dependencies

Flag platforms as HAVE_CLK (or not) in Kconfig, based on whether they
support <linux/clk.h> calls, so that otherwise portable drivers which need
those calls can list that dependency.

Something like this is a prerequisite for merging the musb_hdrc driver,
currently used on platforms including Davinci, OMAP2430, OMAP3xx ...  and
the discrete TUSB6010 chip, which doesn't have a natural platform
dependency.  (Used with OMAP 2420 in current Nokia N8x0 tablets.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/Kconfig         |  7 +++++++
 arch/arm/Kconfig     | 13 +++++++++++++
 arch/avr32/Kconfig   |  1 +
 arch/powerpc/Kconfig |  1 +
 arch/sh/Kconfig      |  1 +
 5 files changed, 23 insertions(+)

diff --git a/arch/Kconfig b/arch/Kconfig
index ad89a33d8c6..4d5ebbc1e72 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -42,3 +42,10 @@ config HAVE_DMA_ATTRS
 
 config USE_GENERIC_SMP_HELPERS
 	def_bool n
+
+config HAVE_CLK
+	def_bool n
+	help
+	  The <linux/clk.h> calls support software clock gating and
+	  thus are a key power management tool on many systems.
+
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d048f6887d0..6fb4f03369f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -198,12 +198,14 @@ choice
 config ARCH_AAEC2000
 	bool "Agilent AAEC-2000 based"
 	select ARM_AMBA
+	select HAVE_CLK
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select HAVE_CLK
 	select ICST525
 	help
 	  Support for ARM's Integrator platform.
@@ -211,6 +213,7 @@ config ARCH_INTEGRATOR
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
+	select HAVE_CLK
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -221,6 +224,7 @@ config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
 	select ARM_AMBA
 	select ARM_VIC
+	select HAVE_CLK
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -262,6 +266,8 @@ config ARCH_EP93XX
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_GPIO
+	select HAVE_CLK
+	select HAVE_CLK
 	select HAVE_GPIO_LIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
@@ -381,6 +387,7 @@ config ARCH_NS9XXX
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	help
 	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
 	  System.
@@ -430,6 +437,7 @@ config ARCH_ORION5X
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
+	select HAVE_CLK
 	help
 	  This enables support for Philips PNX4008 mobile platform.
 
@@ -438,6 +446,7 @@ config ARCH_PXA
 	depends on MMU
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_GPIO_LIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -468,6 +477,7 @@ config ARCH_SA1100
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	select TICK_ONESHOT
 	select HAVE_GPIO_LIB
 	help
@@ -476,6 +486,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -503,12 +514,14 @@ config ARCH_DAVINCI
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  Support for TI's DaVinci platform.
 
 config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_GPIO_LIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 45d63c98601..df4adefedb4 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,6 +10,7 @@ config AVR32
 	# With EMBEDDED=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
 	select EMBEDDED
+	select HAVE_CLK
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	help
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 737ebf9d12b..4d7e2ba10ba 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -843,6 +843,7 @@ source "crypto/Kconfig"
 config PPC_CLOCK
 	bool
 	default n
+	select HAVE_CLK
 
 config PPC_LIB_RHEAP
 	bool
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 3e7384f4619..8879938f335 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux/SuperH Kernel Configuration"
 config SUPERH
 	def_bool y
 	select EMBEDDED
+	select HAVE_CLK
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	help
-- 
cgit v1.2.3


From 6b74ab97bc12ce74acec900f1d89a4aee2e4d70d Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 23 Jul 2008 21:26:49 -0700
Subject: mm: add a basic debugging framework for memory initialisation

Boot initialisation is very complex, with significant numbers of
architecture-specific routines, hooks and code ordering.  While significant
amounts of the initialisation is architecture-independent, it trusts the data
received from the architecture layer.  This is a mistake, and has resulted in
a number of difficult-to-diagnose bugs.

This patchset adds some validation and tracing to memory initialisation.  It
also introduces a few basic defensive measures.  The validation code can be
explicitly disabled for embedded systems.

This patch:

Add additional debugging and verification code for memory initialisation.

Once enabled, the verification checks are always run and when required
additional debugging information may be outputted via a mminit_loglevel=
command-line parameter.

The verification code is placed in a new file mm/mm_init.c.  Ideally other mm
initialisation code will be moved here over time.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt |  8 ++++++++
 lib/Kconfig.debug                   | 12 ++++++++++++
 mm/Makefile                         |  1 +
 mm/internal.h                       | 27 +++++++++++++++++++++++++++
 mm/mm_init.c                        | 18 ++++++++++++++++++
 mm/page_alloc.c                     | 22 +++++++++++++---------
 6 files changed, 79 insertions(+), 9 deletions(-)
 create mode 100644 mm/mm_init.c

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 47e7d8794fc..5e20ccb5a73 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1225,6 +1225,14 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	mga=		[HW,DRM]
 
+	mminit_loglevel=
+			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
+			parameter allows control of the logging verbosity for
+			the additional memory initialisation checks. A value
+			of 0 disables mminit logging and a level of 4 will
+			log everything. Information is printed at KERN_DEBUG
+			so loglevel=8 may also need to be specified.
+
 	mousedev.tap_time=
 			[MOUSE] Maximum time between finger touching and
 			leaving touchpad surface for touch to be considered
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 882c5104899..e1d4764435e 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -505,6 +505,18 @@ config DEBUG_WRITECOUNT
 
 	  If unsure, say N.
 
+config DEBUG_MEMORY_INIT
+	bool "Debug memory initialisation" if EMBEDDED
+	default !EMBEDDED
+	help
+	  Enable this for additional checks during memory initialisation.
+	  The sanity checks verify aspects of the VM such as the memory model
+	  and other information provided by the architecture. Verbose
+	  information will be printed at KERN_DEBUG loglevel depending
+	  on the mminit_loglevel= command-line option.
+
+	  If unsure, say Y
+
 config DEBUG_LIST
 	bool "Debug linked list manipulation"
 	depends on DEBUG_KERNEL
diff --git a/mm/Makefile b/mm/Makefile
index 18c143b3c46..4bbc8f094ff 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_TMPFS_POSIX_ACL) += shmem_acl.o
 obj-$(CONFIG_TINY_SHMEM) += tiny-shmem.o
 obj-$(CONFIG_SLOB) += slob.o
 obj-$(CONFIG_SLAB) += slab.o
+obj-$(CONFIG_DEBUG_MEMORY_INIT) += mm_init.o
 obj-$(CONFIG_SLUB) += slub.o
 obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
 obj-$(CONFIG_FS_XIP) += filemap_xip.o
diff --git a/mm/internal.h b/mm/internal.h
index 0034e947e4b..a7ee0525329 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -59,4 +59,31 @@ static inline unsigned long page_order(struct page *page)
 #define __paginginit __init
 #endif
 
+/* Memory initialisation debug and verification */
+enum mminit_level {
+	MMINIT_WARNING,
+	MMINIT_VERIFY,
+	MMINIT_TRACE
+};
+
+#ifdef CONFIG_DEBUG_MEMORY_INIT
+
+extern int mminit_loglevel;
+
+#define mminit_dprintk(level, prefix, fmt, arg...) \
+do { \
+	if (level < mminit_loglevel) { \
+		printk(level <= MMINIT_WARNING ? KERN_WARNING : KERN_DEBUG); \
+		printk(KERN_CONT "mminit::" prefix " " fmt, ##arg); \
+	} \
+} while (0)
+
+#else
+
+static inline void mminit_dprintk(enum mminit_level level,
+				const char *prefix, const char *fmt, ...)
+{
+}
+
+#endif /* CONFIG_DEBUG_MEMORY_INIT */
 #endif
diff --git a/mm/mm_init.c b/mm/mm_init.c
new file mode 100644
index 00000000000..c01d8dfec81
--- /dev/null
+++ b/mm/mm_init.c
@@ -0,0 +1,18 @@
+/*
+ * mm_init.c - Memory initialisation verification and debugging
+ *
+ * Copyright 2008 IBM Corporation, 2008
+ * Author Mel Gorman <mel@csn.ul.ie>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+int __meminitdata mminit_loglevel;
+
+static __init int set_mminit_loglevel(char *str)
+{
+	get_option(&str, &mminit_loglevel);
+	return 0;
+}
+early_param("mminit_loglevel", set_mminit_loglevel);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 79ac4afc908..0908352ba72 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2975,7 +2975,8 @@ void __init sparse_memory_present_with_active_regions(int nid)
 void __init push_node_boundaries(unsigned int nid,
 		unsigned long start_pfn, unsigned long end_pfn)
 {
-	printk(KERN_DEBUG "Entering push_node_boundaries(%u, %lu, %lu)\n",
+	mminit_dprintk(MMINIT_TRACE, "zoneboundary",
+			"Entering push_node_boundaries(%u, %lu, %lu)\n",
 			nid, start_pfn, end_pfn);
 
 	/* Initialise the boundary for this node if necessary */
@@ -2993,7 +2994,8 @@ void __init push_node_boundaries(unsigned int nid,
 static void __meminit account_node_boundary(unsigned int nid,
 		unsigned long *start_pfn, unsigned long *end_pfn)
 {
-	printk(KERN_DEBUG "Entering account_node_boundary(%u, %lu, %lu)\n",
+	mminit_dprintk(MMINIT_TRACE, "zoneboundary",
+			"Entering account_node_boundary(%u, %lu, %lu)\n",
 			nid, *start_pfn, *end_pfn);
 
 	/* Return if boundary information has not been provided */
@@ -3368,8 +3370,8 @@ static void __paginginit free_area_init_core(struct pglist_data *pgdat,
 			PAGE_ALIGN(size * sizeof(struct page)) >> PAGE_SHIFT;
 		if (realsize >= memmap_pages) {
 			realsize -= memmap_pages;
-			printk(KERN_DEBUG
-				"  %s zone: %lu pages used for memmap\n",
+			mminit_dprintk(MMINIT_TRACE, "memmap_init",
+				"%s zone: %lu pages used for memmap\n",
 				zone_names[j], memmap_pages);
 		} else
 			printk(KERN_WARNING
@@ -3379,7 +3381,8 @@ static void __paginginit free_area_init_core(struct pglist_data *pgdat,
 		/* Account for reserved pages */
 		if (j == 0 && realsize > dma_reserve) {
 			realsize -= dma_reserve;
-			printk(KERN_DEBUG "  %s zone: %lu pages reserved\n",
+			mminit_dprintk(MMINIT_TRACE, "memmap_init",
+					"%s zone: %lu pages reserved\n",
 					zone_names[0], dma_reserve);
 		}
 
@@ -3520,10 +3523,11 @@ void __init add_active_range(unsigned int nid, unsigned long start_pfn,
 {
 	int i;
 
-	printk(KERN_DEBUG "Entering add_active_range(%d, %#lx, %#lx) "
-			  "%d entries of %d used\n",
-			  nid, start_pfn, end_pfn,
-			  nr_nodemap_entries, MAX_ACTIVE_REGIONS);
+	mminit_dprintk(MMINIT_TRACE, "memory_register",
+			"Entering add_active_range(%d, %#lx, %#lx) "
+			"%d entries of %d used\n",
+			nid, start_pfn, end_pfn,
+			nr_nodemap_entries, MAX_ACTIVE_REGIONS);
 
 	/* Merge with existing active regions if possible */
 	for (i = 0; i < nr_nodemap_entries; i++) {
-- 
cgit v1.2.3


From 708614e6180f398cd307ea0048d48ba6fa274610 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 23 Jul 2008 21:26:51 -0700
Subject: mm: verify the page links and memory model

Print out information on how the page flags are being used if mminit_loglevel
is MMINIT_VERIFY or higher and unconditionally performs sanity checks on the
flags regardless of loglevel.

When the page flags are updated with section, node and zone information, a
check are made to ensure the values can be retrieved correctly.  Finally we
confirm that pfn_to_page and page_to_pfn are the correct inverse functions.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/internal.h   | 12 ++++++++++
 mm/mm_init.c    | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 mm/page_alloc.c |  8 +++++++
 3 files changed, 91 insertions(+)

diff --git a/mm/internal.h b/mm/internal.h
index a7ee0525329..7a4a2885dc8 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -78,6 +78,10 @@ do { \
 	} \
 } while (0)
 
+extern void mminit_verify_pageflags_layout(void);
+extern void mminit_verify_page_links(struct page *page,
+		enum zone_type zone, unsigned long nid, unsigned long pfn);
+
 #else
 
 static inline void mminit_dprintk(enum mminit_level level,
@@ -85,5 +89,13 @@ static inline void mminit_dprintk(enum mminit_level level,
 {
 }
 
+static inline void mminit_verify_pageflags_layout(void)
+{
+}
+
+static inline void mminit_verify_page_links(struct page *page,
+		enum zone_type zone, unsigned long nid, unsigned long pfn)
+{
+}
 #endif /* CONFIG_DEBUG_MEMORY_INIT */
 #endif
diff --git a/mm/mm_init.c b/mm/mm_init.c
index c01d8dfec81..e16990d629e 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -7,9 +7,80 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include "internal.h"
 
 int __meminitdata mminit_loglevel;
 
+void __init mminit_verify_pageflags_layout(void)
+{
+	int shift, width;
+	unsigned long or_mask, add_mask;
+
+	shift = 8 * sizeof(unsigned long);
+	width = shift - SECTIONS_WIDTH - NODES_WIDTH - ZONES_WIDTH;
+	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_widths",
+		"Section %d Node %d Zone %d Flags %d\n",
+		SECTIONS_WIDTH,
+		NODES_WIDTH,
+		ZONES_WIDTH,
+		NR_PAGEFLAGS);
+	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_shifts",
+		"Section %d Node %d Zone %d\n",
+#ifdef SECTIONS_SHIFT
+		SECTIONS_SHIFT,
+#else
+		0,
+#endif
+		NODES_SHIFT,
+		ZONES_SHIFT);
+	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_offsets",
+		"Section %lu Node %lu Zone %lu\n",
+		(unsigned long)SECTIONS_PGSHIFT,
+		(unsigned long)NODES_PGSHIFT,
+		(unsigned long)ZONES_PGSHIFT);
+	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_zoneid",
+		"Zone ID: %lu -> %lu\n",
+		(unsigned long)ZONEID_PGOFF,
+		(unsigned long)(ZONEID_PGOFF + ZONEID_SHIFT));
+	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_usage",
+		"location: %d -> %d unused %d -> %d flags %d -> %d\n",
+		shift, width, width, NR_PAGEFLAGS, NR_PAGEFLAGS, 0);
+#ifdef NODE_NOT_IN_PAGE_FLAGS
+	mminit_dprintk(MMINIT_TRACE, "pageflags_layout_nodeflags",
+		"Node not in page flags");
+#endif
+
+	if (SECTIONS_WIDTH) {
+		shift -= SECTIONS_WIDTH;
+		BUG_ON(shift != SECTIONS_PGSHIFT);
+	}
+	if (NODES_WIDTH) {
+		shift -= NODES_WIDTH;
+		BUG_ON(shift != NODES_PGSHIFT);
+	}
+	if (ZONES_WIDTH) {
+		shift -= ZONES_WIDTH;
+		BUG_ON(shift != ZONES_PGSHIFT);
+	}
+
+	/* Check for bitmask overlaps */
+	or_mask = (ZONES_MASK << ZONES_PGSHIFT) |
+			(NODES_MASK << NODES_PGSHIFT) |
+			(SECTIONS_MASK << SECTIONS_PGSHIFT);
+	add_mask = (ZONES_MASK << ZONES_PGSHIFT) +
+			(NODES_MASK << NODES_PGSHIFT) +
+			(SECTIONS_MASK << SECTIONS_PGSHIFT);
+	BUG_ON(or_mask != add_mask);
+}
+
+void __meminit mminit_verify_page_links(struct page *page, enum zone_type zone,
+			unsigned long nid, unsigned long pfn)
+{
+	BUG_ON(page_to_nid(page) != nid);
+	BUG_ON(page_zonenum(page) != zone);
+	BUG_ON(page_to_pfn(page) != pfn);
+}
+
 static __init int set_mminit_loglevel(char *str)
 {
 	get_option(&str, &mminit_loglevel);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 0908352ba72..acab6ad326d 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2534,6 +2534,7 @@ void __meminit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
 		}
 		page = pfn_to_page(pfn);
 		set_page_links(page, zone, nid, pfn);
+		mminit_verify_page_links(page, zone, nid, pfn);
 		init_page_count(page);
 		reset_page_mapcount(page);
 		SetPageReserved(page);
@@ -2836,6 +2837,12 @@ __meminit int init_currently_empty_zone(struct zone *zone,
 
 	zone->zone_start_pfn = zone_start_pfn;
 
+	mminit_dprintk(MMINIT_TRACE, "memmap_init",
+			"Initialising map node %d zone %lu pfns %lu -> %lu\n",
+			pgdat->node_id,
+			(unsigned long)zone_idx(zone),
+			zone_start_pfn, (zone_start_pfn + size));
+
 	zone_init_free_lists(zone);
 
 	return 0;
@@ -3961,6 +3968,7 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 						early_node_map[i].end_pfn);
 
 	/* Initialise every node */
+	mminit_verify_pageflags_layout();
 	setup_nr_node_ids();
 	for_each_online_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
-- 
cgit v1.2.3


From 2dbb51c49f4fecb8330e43247a0edfbc4b2b8974 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 23 Jul 2008 21:26:52 -0700
Subject: mm: make defensive checks around PFN values registered for memory
 usage

There are a number of different views to how much memory is currently active.
There is the arch-independent zone-sizing view, the bootmem allocator and
memory models view.

Architectures register this information at different times and is not
necessarily in sync particularly with respect to some SPARSEMEM limitations.

This patch introduces mminit_validate_memmodel_limits() which is able to
validate and correct PFN ranges with respect to the memory model.  It is only
SPARSEMEM that currently validates itself.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c    |  1 +
 mm/internal.h   | 12 ++++++++++++
 mm/page_alloc.c |  2 ++
 mm/sparse.c     | 37 +++++++++++++++++++++++++++++--------
 4 files changed, 44 insertions(+), 8 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 8d9f60e06f6..9f4bbc5da73 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -91,6 +91,7 @@ static unsigned long __init init_bootmem_core(pg_data_t *pgdat,
 	bootmem_data_t *bdata = pgdat->bdata;
 	unsigned long mapsize;
 
+	mminit_validate_memmodel_limits(&start, &end);
 	bdata->node_bootmem_map = phys_to_virt(PFN_PHYS(mapstart));
 	bdata->node_boot_start = PFN_PHYS(start);
 	bdata->node_low_pfn = end;
diff --git a/mm/internal.h b/mm/internal.h
index 7a4a2885dc8..5d17f3efac4 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -98,4 +98,16 @@ static inline void mminit_verify_page_links(struct page *page,
 {
 }
 #endif /* CONFIG_DEBUG_MEMORY_INIT */
+
+/* mminit_validate_memmodel_limits is independent of CONFIG_DEBUG_MEMORY_INIT */
+#if defined(CONFIG_SPARSEMEM)
+extern void mminit_validate_memmodel_limits(unsigned long *start_pfn,
+				unsigned long *end_pfn);
+#else
+static inline void mminit_validate_memmodel_limits(unsigned long *start_pfn,
+				unsigned long *end_pfn)
+{
+}
+#endif /* CONFIG_SPARSEMEM */
+
 #endif
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index acab6ad326d..0adb66e711e 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3536,6 +3536,8 @@ void __init add_active_range(unsigned int nid, unsigned long start_pfn,
 			nid, start_pfn, end_pfn,
 			nr_nodemap_entries, MAX_ACTIVE_REGIONS);
 
+	mminit_validate_memmodel_limits(&start_pfn, &end_pfn);
+
 	/* Merge with existing active regions if possible */
 	for (i = 0; i < nr_nodemap_entries; i++) {
 		if (early_node_map[i].nid != nid)
diff --git a/mm/sparse.c b/mm/sparse.c
index 36511c7b5e2..7a3650923d9 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -12,6 +12,7 @@
 #include <asm/dma.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
+#include "internal.h"
 
 /*
  * Permanent SPARSEMEM data:
@@ -147,22 +148,41 @@ static inline int sparse_early_nid(struct mem_section *section)
 	return (section->section_mem_map >> SECTION_NID_SHIFT);
 }
 
-/* Record a memory area against a node. */
-void __init memory_present(int nid, unsigned long start, unsigned long end)
+/* Validate the physical addressing limitations of the model */
+void __meminit mminit_validate_memmodel_limits(unsigned long *start_pfn,
+						unsigned long *end_pfn)
 {
-	unsigned long max_arch_pfn = 1UL << (MAX_PHYSMEM_BITS-PAGE_SHIFT);
-	unsigned long pfn;
+	unsigned long max_sparsemem_pfn = 1UL << (MAX_PHYSMEM_BITS-PAGE_SHIFT);
 
 	/*
 	 * Sanity checks - do not allow an architecture to pass
 	 * in larger pfns than the maximum scope of sparsemem:
 	 */
-	if (start >= max_arch_pfn)
-		return;
-	if (end >= max_arch_pfn)
-		end = max_arch_pfn;
+	if (*start_pfn > max_sparsemem_pfn) {
+		mminit_dprintk(MMINIT_WARNING, "pfnvalidation",
+			"Start of range %lu -> %lu exceeds SPARSEMEM max %lu\n",
+			*start_pfn, *end_pfn, max_sparsemem_pfn);
+		WARN_ON_ONCE(1);
+		*start_pfn = max_sparsemem_pfn;
+		*end_pfn = max_sparsemem_pfn;
+	}
+
+	if (*end_pfn > max_sparsemem_pfn) {
+		mminit_dprintk(MMINIT_WARNING, "pfnvalidation",
+			"End of range %lu -> %lu exceeds SPARSEMEM max %lu\n",
+			*start_pfn, *end_pfn, max_sparsemem_pfn);
+		WARN_ON_ONCE(1);
+		*end_pfn = max_sparsemem_pfn;
+	}
+}
+
+/* Record a memory area against a node. */
+void __init memory_present(int nid, unsigned long start, unsigned long end)
+{
+	unsigned long pfn;
 
 	start &= PAGE_SECTION_MASK;
+	mminit_validate_memmodel_limits(&start, &end);
 	for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) {
 		unsigned long section = pfn_to_section_nr(pfn);
 		struct mem_section *ms;
@@ -187,6 +207,7 @@ unsigned long __init node_memmap_size_bytes(int nid, unsigned long start_pfn,
 	unsigned long pfn;
 	unsigned long nr_pages = 0;
 
+	mminit_validate_memmodel_limits(&start_pfn, &end_pfn);
 	for (pfn = start_pfn; pfn < end_pfn; pfn += PAGES_PER_SECTION) {
 		if (nid != early_pfn_to_nid(pfn))
 			continue;
-- 
cgit v1.2.3


From 68ad8df42e12037c3894c9706ab428bf5cd6426b Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 23 Jul 2008 21:26:52 -0700
Subject: mm: print out the zonelists on request for manual verification

This patch prints out the zonelists during boot for manual verification by the
user if the mminit_loglevel is MMINIT_VERIFY or higher.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/internal.h   |  5 +++++
 mm/mm_init.c    | 45 +++++++++++++++++++++++++++++++++++++++++++++
 mm/page_alloc.c |  1 +
 3 files changed, 51 insertions(+)

diff --git a/mm/internal.h b/mm/internal.h
index 5d17f3efac4..50807e12490 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -81,6 +81,7 @@ do { \
 extern void mminit_verify_pageflags_layout(void);
 extern void mminit_verify_page_links(struct page *page,
 		enum zone_type zone, unsigned long nid, unsigned long pfn);
+extern void mminit_verify_zonelist(void);
 
 #else
 
@@ -97,6 +98,10 @@ static inline void mminit_verify_page_links(struct page *page,
 		enum zone_type zone, unsigned long nid, unsigned long pfn)
 {
 }
+
+static inline void mminit_verify_zonelist(void)
+{
+}
 #endif /* CONFIG_DEBUG_MEMORY_INIT */
 
 /* mminit_validate_memmodel_limits is independent of CONFIG_DEBUG_MEMORY_INIT */
diff --git a/mm/mm_init.c b/mm/mm_init.c
index e16990d629e..ce445ca097e 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -11,6 +11,51 @@
 
 int __meminitdata mminit_loglevel;
 
+/* The zonelists are simply reported, validation is manual. */
+void mminit_verify_zonelist(void)
+{
+	int nid;
+
+	if (mminit_loglevel < MMINIT_VERIFY)
+		return;
+
+	for_each_online_node(nid) {
+		pg_data_t *pgdat = NODE_DATA(nid);
+		struct zone *zone;
+		struct zoneref *z;
+		struct zonelist *zonelist;
+		int i, listid, zoneid;
+
+		BUG_ON(MAX_ZONELISTS > 2);
+		for (i = 0; i < MAX_ZONELISTS * MAX_NR_ZONES; i++) {
+
+			/* Identify the zone and nodelist */
+			zoneid = i % MAX_NR_ZONES;
+			listid = i / MAX_NR_ZONES;
+			zonelist = &pgdat->node_zonelists[listid];
+			zone = &pgdat->node_zones[zoneid];
+			if (!populated_zone(zone))
+				continue;
+
+			/* Print information about the zonelist */
+			printk(KERN_DEBUG "mminit::zonelist %s %d:%s = ",
+				listid > 0 ? "thisnode" : "general", nid,
+				zone->name);
+
+			/* Iterate the zonelist */
+			for_each_zone_zonelist(zone, z, zonelist, zoneid) {
+#ifdef CONFIG_NUMA
+				printk(KERN_CONT "%d:%s ",
+					zone->node, zone->name);
+#else
+				printk(KERN_CONT "0:%s ", zone->name);
+#endif /* CONFIG_NUMA */
+			}
+			printk(KERN_CONT "\n");
+		}
+	}
+}
+
 void __init mminit_verify_pageflags_layout(void)
 {
 	int shift, width;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 0adb66e711e..9ece07ce65b 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2352,6 +2352,7 @@ void build_all_zonelists(void)
 
 	if (system_state == SYSTEM_BOOTING) {
 		__build_all_zonelists(NULL);
+		mminit_verify_zonelist();
 		cpuset_init_current_mems_allowed();
 	} else {
 		/* we have to stop all cpus to guarantee there is no user
-- 
cgit v1.2.3


From 8b05c7e6e159d2f33c9275281b8b909a89eb7c5d Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Wed, 23 Jul 2008 21:26:53 -0700
Subject: add a helper function to test if an object is on the stack

lib/debugobjects.c has a function to test if an object is on the stack.
The block layer and ide needs it (they need to avoid DMA from/to stack
buffers).  This patch moves the function to include/linux/sched.h so that
everyone can use it.

lib/debugobjects.c uses current->stack but this patch uses a
task_stack_page() accessor, which is a preferable way to access the stack.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sched.h | 7 +++++++
 lib/debugobjects.c    | 4 +---
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index dc7e592c473..6aca4a16e37 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1983,6 +1983,13 @@ static inline unsigned long *end_of_stack(struct task_struct *p)
 
 #endif
 
+static inline int object_is_on_stack(void *obj)
+{
+	void *stack = task_stack_page(current);
+
+	return (obj >= stack) && (obj < (stack + THREAD_SIZE));
+}
+
 extern void thread_info_cache_init(void);
 
 /* set thread flags in other task's structures
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 85b18d79be8..f86196390cf 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -226,15 +226,13 @@ debug_object_fixup(int (*fixup)(void *addr, enum debug_obj_state state),
 
 static void debug_object_is_on_stack(void *addr, int onstack)
 {
-	void *stack = current->stack;
 	int is_on_stack;
 	static int limit;
 
 	if (limit > 4)
 		return;
 
-	is_on_stack = (addr >= stack && addr < (stack + THREAD_SIZE));
-
+	is_on_stack = object_is_on_stack(addr);
 	if (is_on_stack == onstack)
 		return;
 
-- 
cgit v1.2.3


From b61bfa3c462671c48a51fb5c31af337c5a996a04 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:26:55 -0700
Subject: mm: move bootmem descriptors definition to a single place

There are a lot of places that define either a single bootmem descriptor or an
array of them.  Use only one central array with MAX_NUMNODES items instead.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/mm/numa.c             |  8 ++++----
 arch/arm/mm/discontig.c          | 34 ++++++++++++++++------------------
 arch/ia64/mm/discontig.c         | 11 +++++------
 arch/m32r/mm/discontig.c         |  4 +---
 arch/m68k/mm/init.c              |  4 +---
 arch/mips/sgi-ip27/ip27-memory.c |  4 +---
 arch/parisc/mm/init.c            |  3 +--
 arch/powerpc/mm/numa.c           |  3 +--
 arch/sh/mm/numa.c                |  5 ++---
 arch/sparc64/mm/init.c           |  3 +--
 arch/x86/mm/discontig_32.c       |  3 +--
 arch/x86/mm/numa_64.c            |  4 +---
 include/linux/bootmem.h          |  2 ++
 mm/bootmem.c                     |  2 ++
 mm/page_alloc.c                  |  4 +---
 15 files changed, 40 insertions(+), 54 deletions(-)

diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 10ab7833e83..a53fda0481c 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -19,7 +19,6 @@
 #include <asm/pgalloc.h>
 
 pg_data_t node_data[MAX_NUMNODES];
-bootmem_data_t node_bdata[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
 
 #undef DEBUG_DISCONTIG
@@ -141,7 +140,7 @@ setup_memory_node(int nid, void *kernel_end)
 		printk(" not enough mem to reserve NODE_DATA");
 		return;
 	}
-	NODE_DATA(nid)->bdata = &node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 
 	printk(" Detected node memory:   start %8lu, end %8lu\n",
 	       node_min_pfn, node_max_pfn);
@@ -304,8 +303,9 @@ void __init paging_init(void)
 	dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
 	for_each_online_node(nid) {
-		unsigned long start_pfn = node_bdata[nid].node_boot_start >> PAGE_SHIFT;
-		unsigned long end_pfn = node_bdata[nid].node_low_pfn;
+		bootmem_data_t *bdata = &bootmem_node_data[nid];
+		unsigned long start_pfn = bdata->node_boot_start >> PAGE_SHIFT;
+		unsigned long end_pfn = bdata->node_low_pfn;
 
 		if (dma_local_pfn >= end_pfn - start_pfn)
 			zones_size[ZONE_DMA] = end_pfn - start_pfn;
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
index 1e560218950..c8c0c4b0f0a 100644
--- a/arch/arm/mm/discontig.c
+++ b/arch/arm/mm/discontig.c
@@ -21,26 +21,24 @@
  * Our node_data structure for discontiguous memory.
  */
 
-static bootmem_data_t node_bootmem_data[MAX_NUMNODES];
-
 pg_data_t discontig_node_data[MAX_NUMNODES] = {
-  { .bdata = &node_bootmem_data[0] },
-  { .bdata = &node_bootmem_data[1] },
-  { .bdata = &node_bootmem_data[2] },
-  { .bdata = &node_bootmem_data[3] },
+  { .bdata = &bootmem_node_data[0] },
+  { .bdata = &bootmem_node_data[1] },
+  { .bdata = &bootmem_node_data[2] },
+  { .bdata = &bootmem_node_data[3] },
 #if MAX_NUMNODES == 16
-  { .bdata = &node_bootmem_data[4] },
-  { .bdata = &node_bootmem_data[5] },
-  { .bdata = &node_bootmem_data[6] },
-  { .bdata = &node_bootmem_data[7] },
-  { .bdata = &node_bootmem_data[8] },
-  { .bdata = &node_bootmem_data[9] },
-  { .bdata = &node_bootmem_data[10] },
-  { .bdata = &node_bootmem_data[11] },
-  { .bdata = &node_bootmem_data[12] },
-  { .bdata = &node_bootmem_data[13] },
-  { .bdata = &node_bootmem_data[14] },
-  { .bdata = &node_bootmem_data[15] },
+  { .bdata = &bootmem_node_data[4] },
+  { .bdata = &bootmem_node_data[5] },
+  { .bdata = &bootmem_node_data[6] },
+  { .bdata = &bootmem_node_data[7] },
+  { .bdata = &bootmem_node_data[8] },
+  { .bdata = &bootmem_node_data[9] },
+  { .bdata = &bootmem_node_data[10] },
+  { .bdata = &bootmem_node_data[11] },
+  { .bdata = &bootmem_node_data[12] },
+  { .bdata = &bootmem_node_data[13] },
+  { .bdata = &bootmem_node_data[14] },
+  { .bdata = &bootmem_node_data[15] },
 #endif
 };
 
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 544dc420c65..2fcf8464331 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -36,7 +36,6 @@ struct early_node_data {
 	struct ia64_node_data *node_data;
 	unsigned long pernode_addr;
 	unsigned long pernode_size;
-	struct bootmem_data bootmem_data;
 	unsigned long num_physpages;
 #ifdef CONFIG_ZONE_DMA
 	unsigned long num_dma_physpages;
@@ -76,7 +75,7 @@ static int __init build_node_maps(unsigned long start, unsigned long len,
 				  int node)
 {
 	unsigned long cstart, epfn, end = start + len;
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
 	cstart = GRANULEROUNDDOWN(start);
@@ -167,7 +166,7 @@ static void __init fill_pernode(int node, unsigned long pernode,
 {
 	void *cpu_data;
 	int cpus = early_nr_cpus_node(node);
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	mem_data[node].pernode_addr = pernode;
 	mem_data[node].pernode_size = pernodesize;
@@ -224,7 +223,7 @@ static int __init find_pernode_space(unsigned long start, unsigned long len,
 {
 	unsigned long epfn;
 	unsigned long pernodesize = 0, pernode, pages, mapsize;
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	epfn = (start + len) >> PAGE_SHIFT;
 
@@ -440,7 +439,7 @@ void __init find_memory(void)
 	efi_memmap_walk(find_max_min_low_pfn, NULL);
 
 	for_each_online_node(node)
-		if (mem_data[node].bootmem_data.node_low_pfn) {
+		if (bootmem_node_data[node].node_low_pfn) {
 			node_clear(node, memory_less_mask);
 			mem_data[node].min_pfn = ~0UL;
 		}
@@ -460,7 +459,7 @@ void __init find_memory(void)
 		else if (node_isset(node, memory_less_mask))
 			continue;
 
-		bdp = &mem_data[node].bootmem_data;
+		bdp = &bootmem_node_data[node];
 		pernode = mem_data[node].pernode_addr;
 		pernodesize = mem_data[node].pernode_size;
 		map = pernode + pernodesize;
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index 07c1af7dc0e..aa9145ef6cc 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -20,7 +20,6 @@ extern char _end[];
 
 struct pglist_data *node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
 
 pg_data_t m32r_node_data[MAX_NUMNODES];
 
@@ -81,7 +80,7 @@ unsigned long __init setup_memory(void)
 	for_each_online_node(nid) {
 		mp = &mem_prof[nid];
 		NODE_DATA(nid)=(pg_data_t *)&m32r_node_data[nid];
-		NODE_DATA(nid)->bdata = &node_bdata[nid];
+		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 		min_pfn = mp->start_pfn;
 		max_pfn = mp->start_pfn + mp->pages;
 		bootmap_size = init_bootmem_node(NODE_DATA(nid), mp->free_pfn,
@@ -163,4 +162,3 @@ unsigned long __init zone_sizes_init(void)
 
 	return holes;
 }
-
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index d8fb9c5303c..79f5f94d480 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -32,8 +32,6 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-static bootmem_data_t __initdata bootmem_data[MAX_NUMNODES];
-
 pg_data_t pg_data_map[MAX_NUMNODES];
 EXPORT_SYMBOL(pg_data_map);
 
@@ -58,7 +56,7 @@ void __init m68k_setup_node(int node)
 		pg_data_table[i] = pg_data_map + node;
 	}
 #endif
-	pg_data_map[node].bdata = bootmem_data + node;
+	pg_data_map[node].bdata = bootmem_node_data + node;
 	node_set_online(node);
 }
 
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 42cd1095630..060d853d7b3 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,8 +33,6 @@
 #define SLOT_PFNSHIFT           (SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT           (NASID_SHFT - PAGE_SHIFT)
 
-static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
-
 struct node_data *__node_data[MAX_COMPACT_NODES];
 
 EXPORT_SYMBOL(__node_data);
@@ -403,7 +401,7 @@ static void __init node_mem_init(cnodeid_t node)
 	 */
 	__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
 
-	NODE_DATA(node)->bdata = &plat_node_bdata[node];
+	NODE_DATA(node)->bdata = &bootmem_node_data[node];
 	NODE_DATA(node)->node_start_pfn = start_pfn;
 	NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index b4d6c8777ed..0ddf4904640 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -36,7 +36,6 @@ extern int  data_start;
 
 #ifdef CONFIG_DISCONTIGMEM
 struct node_map_data node_data[MAX_NUMNODES] __read_mostly;
-bootmem_data_t bmem_data[MAX_NUMNODES] __read_mostly;
 unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
 #endif
 
@@ -262,7 +261,7 @@ static void __init setup_bootmem(void)
 #ifdef CONFIG_DISCONTIGMEM
 	for (i = 0; i < MAX_PHYSMEM_RANGES; i++) {
 		memset(NODE_DATA(i), 0, sizeof(pg_data_t));
-		NODE_DATA(i)->bdata = &bmem_data[i];
+		NODE_DATA(i)->bdata = &bootmem_node_data[i];
 	}
 	memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index cf4bffba6f7..d9a18135133 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -39,7 +39,6 @@ EXPORT_SYMBOL(numa_cpu_lookup_table);
 EXPORT_SYMBOL(numa_cpumask_lookup_table);
 EXPORT_SYMBOL(node_data);
 
-static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES];
 static int min_common_depth;
 static int n_mem_addr_cells, n_mem_size_cells;
 
@@ -816,7 +815,7 @@ void __init do_init_bootmem(void)
   		dbg("node %d\n", nid);
 		dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
 
-		NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 		NODE_DATA(nid)->node_start_pfn = start_pfn;
 		NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 1663199ce88..095d93bec7c 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -14,7 +14,6 @@
 #include <linux/pfn.h>
 #include <asm/sections.h>
 
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL_GPL(node_data);
 
@@ -35,7 +34,7 @@ void __init setup_memory(void)
 	NODE_DATA(0) = pfn_to_kaddr(free_pfn);
 	memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
 	free_pfn += PFN_UP(sizeof(struct pglist_data));
-	NODE_DATA(0)->bdata = &plat_node_bdata[0];
+	NODE_DATA(0)->bdata = &bootmem_node_data[0];
 
 	/* Set up node 0 */
 	setup_bootmem_allocator(free_pfn);
@@ -66,7 +65,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	free_pfn += PFN_UP(sizeof(struct pglist_data));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
 	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 84898c44dd4..71329747395 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -788,7 +788,6 @@ int numa_cpu_lookup_table[NR_CPUS];
 cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 
 struct mdesc_mblock {
 	u64	base;
@@ -871,7 +870,7 @@ static void __init allocate_node_data(int nid)
 	NODE_DATA(nid) = __va(paddr);
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 #endif
 
 	p = NODE_DATA(nid);
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 5dfef9fa061..62fa440678d 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -42,7 +42,6 @@
 
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node0_bdata;
 
 /*
  * numa interface - we expect the numa architecture specific code to have
@@ -385,7 +384,7 @@ void __init initmem_init(unsigned long start_pfn,
 	for_each_online_node(nid)
 		memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(0)->bdata = &node0_bdata;
+	NODE_DATA(0)->bdata = &bootmem_node_data[0];
 	setup_bootmem_allocator();
 }
 
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 9782f42dd31..a4dd793d600 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -23,8 +23,6 @@
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
-
 struct memnode memnode;
 
 s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
@@ -198,7 +196,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 		nodedata_phys + pgdat_size - 1);
 
 	memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
-	NODE_DATA(nodeid)->bdata = &plat_node_bdata[nodeid];
+	NODE_DATA(nodeid)->bdata = &bootmem_node_data[nodeid];
 	NODE_DATA(nodeid)->node_start_pfn = start_pfn;
 	NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn;
 
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index a1d9b79078e..2599c741405 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -38,6 +38,8 @@ typedef struct bootmem_data {
 	struct list_head list;
 } bootmem_data_t;
 
+extern bootmem_data_t bootmem_node_data[];
+
 extern unsigned long bootmem_bootmap_pages(unsigned long);
 extern unsigned long init_bootmem(unsigned long addr, unsigned long memend);
 extern void free_bootmem(unsigned long addr, unsigned long size);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 9f4bbc5da73..35b3cb66703 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -36,6 +36,8 @@ static LIST_HEAD(bdata_list);
 unsigned long saved_max_pfn;
 #endif
 
+bootmem_data_t bootmem_node_data[MAX_NUMNODES] __initdata;
+
 /* return the number of _pages_ that will be allocated for the boot bitmap */
 unsigned long __init bootmem_bootmap_pages(unsigned long pages)
 {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 9ece07ce65b..e089b92cdff 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4040,9 +4040,7 @@ void __init set_dma_reserve(unsigned long new_dma_reserve)
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-static bootmem_data_t contig_bootmem_data;
-struct pglist_data contig_page_data = { .bdata = &contig_bootmem_data };
-
+struct pglist_data contig_page_data = { .bdata = &bootmem_node_data[0] };
 EXPORT_SYMBOL(contig_page_data);
 #endif
 
-- 
cgit v1.2.3


From 6b312c0e6e2f44b020e12953d1dd37eed60e3609 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:26:58 -0700
Subject: mm: fix free_all_bootmem_core alignment check

The check for node_boot_start is bogus because we start freeing at the
corresponding pfn.  So check if the pfn is properly aligned instead in a more
readable way and adjust the documentation.

Also remove an unneeded accounting variable.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 35b3cb66703..319a79bce7c 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -377,7 +377,7 @@ static unsigned long __init free_all_bootmem_core(pg_data_t *pgdat)
 	struct page *page;
 	unsigned long pfn;
 	bootmem_data_t *bdata = pgdat->bdata;
-	unsigned long i, count, total = 0;
+	unsigned long i, count;
 	unsigned long idx;
 	unsigned long *map; 
 	int gofast = 0;
@@ -389,10 +389,13 @@ static unsigned long __init free_all_bootmem_core(pg_data_t *pgdat)
 	pfn = PFN_DOWN(bdata->node_boot_start);
 	idx = bdata->node_low_pfn - pfn;
 	map = bdata->node_bootmem_map;
-	/* Check physaddr is O(LOG2(BITS_PER_LONG)) page aligned */
-	if (bdata->node_boot_start == 0 ||
-	    ffs(bdata->node_boot_start) - PAGE_SHIFT > ffs(BITS_PER_LONG))
+	/*
+	 * Check if we are aligned to BITS_PER_LONG pages.  If so, we might
+	 * be able to free page orders of that size at once.
+	 */
+	if (!(pfn & (BITS_PER_LONG-1)))
 		gofast = 1;
+
 	for (i = 0; i < idx; ) {
 		unsigned long v = ~map[i / BITS_PER_LONG];
 
@@ -420,23 +423,19 @@ static unsigned long __init free_all_bootmem_core(pg_data_t *pgdat)
 		}
 		pfn += BITS_PER_LONG;
 	}
-	total += count;
 
 	/*
 	 * Now free the allocator bitmap itself, it's not
 	 * needed anymore:
 	 */
 	page = virt_to_page(bdata->node_bootmem_map);
-	count = 0;
 	idx = (get_mapsize(bdata) + PAGE_SIZE-1) >> PAGE_SHIFT;
-	for (i = 0; i < idx; i++, page++) {
+	for (i = 0; i < idx; i++, page++)
 		__free_pages_bootmem(page, 0);
-		count++;
-	}
-	total += count;
+	count += i;
 	bdata->node_bootmem_map = NULL;
 
-	return total;
+	return count;
 }
 
 unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn,
-- 
cgit v1.2.3


From 8ae04463077324ed9f6b04ab3a5b17ae1ee4dd35 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:26:59 -0700
Subject: mm: normalize internal argument passing of bootmem data

All _core functions only need the bootmem data, not the whole node descriptor.
Adjust the two functions that take the node descriptor unneededly.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 319a79bce7c..251c66c5d96 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -87,10 +87,9 @@ static unsigned long __init get_mapsize(bootmem_data_t *bdata)
 /*
  * Called once to set up the allocator itself.
  */
-static unsigned long __init init_bootmem_core(pg_data_t *pgdat,
+static unsigned long __init init_bootmem_core(bootmem_data_t *bdata,
 	unsigned long mapstart, unsigned long start, unsigned long end)
 {
-	bootmem_data_t *bdata = pgdat->bdata;
 	unsigned long mapsize;
 
 	mminit_validate_memmodel_limits(&start, &end);
@@ -372,11 +371,10 @@ found:
 	return ret;
 }
 
-static unsigned long __init free_all_bootmem_core(pg_data_t *pgdat)
+static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 {
 	struct page *page;
 	unsigned long pfn;
-	bootmem_data_t *bdata = pgdat->bdata;
 	unsigned long i, count;
 	unsigned long idx;
 	unsigned long *map; 
@@ -441,7 +439,7 @@ static unsigned long __init free_all_bootmem_core(pg_data_t *pgdat)
 unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn,
 				unsigned long startpfn, unsigned long endpfn)
 {
-	return init_bootmem_core(pgdat, freepfn, startpfn, endpfn);
+	return init_bootmem_core(pgdat->bdata, freepfn, startpfn, endpfn);
 }
 
 int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
@@ -466,14 +464,14 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 unsigned long __init free_all_bootmem_node(pg_data_t *pgdat)
 {
 	register_page_bootmem_info_node(pgdat);
-	return free_all_bootmem_core(pgdat);
+	return free_all_bootmem_core(pgdat->bdata);
 }
 
 unsigned long __init init_bootmem(unsigned long start, unsigned long pages)
 {
 	max_low_pfn = pages;
 	min_low_pfn = start;
-	return init_bootmem_core(NODE_DATA(0), start, 0, pages);
+	return init_bootmem_core(NODE_DATA(0)->bdata, start, 0, pages);
 }
 
 #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
@@ -504,7 +502,7 @@ void __init free_bootmem(unsigned long addr, unsigned long size)
 
 unsigned long __init free_all_bootmem(void)
 {
-	return free_all_bootmem_core(NODE_DATA(0));
+	return free_all_bootmem_core(NODE_DATA(0)->bdata);
 }
 
 void * __init __alloc_bootmem_nopanic(unsigned long size, unsigned long align,
-- 
cgit v1.2.3


From ffc6421f0720f433b5b35b89ff56e998eabff93b Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:26:59 -0700
Subject: mm: unexport __alloc_bootmem_core()

This function has no external callers, so unexport it.  Also fix its naming
inconsistency.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/bootmem.h |  5 -----
 mm/bootmem.c            | 24 ++++++++++++------------
 2 files changed, 12 insertions(+), 17 deletions(-)

diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 2599c741405..dd8fee6c46d 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -56,11 +56,6 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 				      unsigned long size,
 				      unsigned long align,
 				      unsigned long goal);
-extern void *__alloc_bootmem_core(struct bootmem_data *bdata,
-				  unsigned long size,
-				  unsigned long align,
-				  unsigned long goal,
-				  unsigned long limit);
 
 /*
  * flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE,
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 251c66c5d96..4bc6ae2fbaa 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -234,9 +234,9 @@ static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
  *
  * NOTE:  This function is _not_ reentrant.
  */
-void * __init
-__alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size,
-	      unsigned long align, unsigned long goal, unsigned long limit)
+static void * __init
+alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size,
+		unsigned long align, unsigned long goal, unsigned long limit)
 {
 	unsigned long areasize, preferred;
 	unsigned long i, start = 0, incr, eidx, end_pfn;
@@ -245,7 +245,7 @@ __alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size,
 	void *node_bootmem_map;
 
 	if (!size) {
-		printk("__alloc_bootmem_core(): zero-sized request\n");
+		printk("alloc_bootmem_core(): zero-sized request\n");
 		BUG();
 	}
 	BUG_ON(align & (align-1));
@@ -512,7 +512,7 @@ void * __init __alloc_bootmem_nopanic(unsigned long size, unsigned long align,
 	void *ptr;
 
 	list_for_each_entry(bdata, &bdata_list, list) {
-		ptr = __alloc_bootmem_core(bdata, size, align, goal, 0);
+		ptr = alloc_bootmem_core(bdata, size, align, goal, 0);
 		if (ptr)
 			return ptr;
 	}
@@ -540,7 +540,7 @@ void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 {
 	void *ptr;
 
-	ptr = __alloc_bootmem_core(pgdat->bdata, size, align, goal, 0);
+	ptr = alloc_bootmem_core(pgdat->bdata, size, align, goal, 0);
 	if (ptr)
 		return ptr;
 
@@ -559,8 +559,8 @@ void * __init alloc_bootmem_section(unsigned long size,
 	goal = PFN_PHYS(pfn);
 	limit = PFN_PHYS(section_nr_to_pfn(section_nr + 1)) - 1;
 	pgdat = NODE_DATA(early_pfn_to_nid(pfn));
-	ptr = __alloc_bootmem_core(pgdat->bdata, size, SMP_CACHE_BYTES, goal,
-				   limit);
+	ptr = alloc_bootmem_core(pgdat->bdata, size, SMP_CACHE_BYTES, goal,
+				limit);
 
 	if (!ptr)
 		return NULL;
@@ -589,8 +589,8 @@ void * __init __alloc_bootmem_low(unsigned long size, unsigned long align,
 	void *ptr;
 
 	list_for_each_entry(bdata, &bdata_list, list) {
-		ptr = __alloc_bootmem_core(bdata, size, align, goal,
-						ARCH_LOW_ADDRESS_LIMIT);
+		ptr = alloc_bootmem_core(bdata, size, align, goal,
+					ARCH_LOW_ADDRESS_LIMIT);
 		if (ptr)
 			return ptr;
 	}
@@ -606,6 +606,6 @@ void * __init __alloc_bootmem_low(unsigned long size, unsigned long align,
 void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
 				       unsigned long align, unsigned long goal)
 {
-	return __alloc_bootmem_core(pgdat->bdata, size, align, goal,
-				    ARCH_LOW_ADDRESS_LIMIT);
+	return alloc_bootmem_core(pgdat->bdata, size, align, goal,
+				ARCH_LOW_ADDRESS_LIMIT);
 }
-- 
cgit v1.2.3


From efe9e77997f6e0306fedc6efa98df491dcf5ecb0 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Wed, 23 Jul 2008 21:27:00 -0700
Subject: mspec: convert nopfn to fault

[akpm@linux-foundation.org: remove unused variable]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mspec.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index fe2a95b5d3c..30f095a8c2d 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -193,25 +193,23 @@ mspec_close(struct vm_area_struct *vma)
 }
 
 /*
- * mspec_nopfn
+ * mspec_fault
  *
  * Creates a mspec page and maps it to user space.
  */
-static unsigned long
-mspec_nopfn(struct vm_area_struct *vma, unsigned long address)
+static int
+mspec_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
 	unsigned long paddr, maddr;
 	unsigned long pfn;
-	int index;
+	pgoff_t index = vmf->pgoff;
 	struct vma_data *vdata = vma->vm_private_data;
 
-	BUG_ON(address < vdata->vm_start || address >= vdata->vm_end);
-	index = (address - vdata->vm_start) >> PAGE_SHIFT;
 	maddr = (volatile unsigned long) vdata->maddr[index];
 	if (maddr == 0) {
 		maddr = uncached_alloc_page(numa_node_id(), 1);
 		if (maddr == 0)
-			return NOPFN_OOM;
+			return VM_FAULT_OOM;
 
 		spin_lock(&vdata->lock);
 		if (vdata->maddr[index] == 0) {
@@ -231,13 +229,20 @@ mspec_nopfn(struct vm_area_struct *vma, unsigned long address)
 
 	pfn = paddr >> PAGE_SHIFT;
 
-	return pfn;
+	/*
+	 * vm_insert_pfn can fail with -EBUSY, but in that case it will
+	 * be because another thread has installed the pte first, so it
+	 * is no problem.
+	 */
+	vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn);
+
+	return VM_FAULT_NOPAGE;
 }
 
 static struct vm_operations_struct mspec_vm_ops = {
 	.open = mspec_open,
 	.close = mspec_close,
-	.nopfn = mspec_nopfn
+	.fault = mspec_fault,
 };
 
 /*
-- 
cgit v1.2.3


From e4048e5dc4aecec670f48ed007a28779f09cebd6 Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Wed, 23 Jul 2008 21:27:01 -0700
Subject: page allocator: inline some __alloc_pages() wrappers

Two zonelist patch series rewrote __page_alloc() largely.  Now, it is just
a wrapper function.  Inlining them will save a function call.

[akpm@linux-foundation.org: export __alloc_pages_internal]
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/gfp.h | 21 +++++++++++++++++----
 mm/page_alloc.c     | 19 ++-----------------
 2 files changed, 19 insertions(+), 21 deletions(-)

diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index b414be38718..f640ed24142 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -173,11 +173,24 @@ static inline void arch_free_page(struct page *page, int order) { }
 static inline void arch_alloc_page(struct page *page, int order) { }
 #endif
 
-extern struct page *__alloc_pages(gfp_t, unsigned int, struct zonelist *);
+struct page *
+__alloc_pages_internal(gfp_t gfp_mask, unsigned int order,
+		       struct zonelist *zonelist, nodemask_t *nodemask);
+
+static inline struct page *
+__alloc_pages(gfp_t gfp_mask, unsigned int order,
+		struct zonelist *zonelist)
+{
+	return __alloc_pages_internal(gfp_mask, order, zonelist, NULL);
+}
+
+static inline struct page *
+__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
+		struct zonelist *zonelist, nodemask_t *nodemask)
+{
+	return __alloc_pages_internal(gfp_mask, order, zonelist, nodemask);
+}
 
-extern struct page *
-__alloc_pages_nodemask(gfp_t, unsigned int,
-				struct zonelist *, nodemask_t *nodemask);
 
 static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask,
 						unsigned int order)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e089b92cdff..35b1347d81b 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1429,7 +1429,7 @@ try_next_zone:
 /*
  * This is the 'heart' of the zoned buddy allocator.
  */
-static struct page *
+struct page *
 __alloc_pages_internal(gfp_t gfp_mask, unsigned int order,
 			struct zonelist *zonelist, nodemask_t *nodemask)
 {
@@ -1632,22 +1632,7 @@ nopage:
 got_pg:
 	return page;
 }
-
-struct page *
-__alloc_pages(gfp_t gfp_mask, unsigned int order,
-		struct zonelist *zonelist)
-{
-	return __alloc_pages_internal(gfp_mask, order, zonelist, NULL);
-}
-
-struct page *
-__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
-		struct zonelist *zonelist, nodemask_t *nodemask)
-{
-	return __alloc_pages_internal(gfp_mask, order, zonelist, nodemask);
-}
-
-EXPORT_SYMBOL(__alloc_pages);
+EXPORT_SYMBOL(__alloc_pages_internal);
 
 /*
  * Common helper functions.
-- 
cgit v1.2.3


From 4f5ca265788973e3f5a1129a96ee4a9cbf587f2b Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:27:02 -0700
Subject: mm/migrate.c should #include <linux/syscalls.h>

Every file should include the headers containing the externs for its
global functions (in this case for sys_move_pages()).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/migrate.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/migrate.c b/mm/migrate.c
index 55bd355d170..e7d13a708da 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -30,6 +30,7 @@
 #include <linux/vmalloc.h>
 #include <linux/security.h>
 #include <linux/memcontrol.h>
+#include <linux/syscalls.h>
 
 #include "internal.h"
 
-- 
cgit v1.2.3


From c748e1340e0de3fa7fed86f8bdf499be9242afff Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:27:03 -0700
Subject: mm/vmstat.c: proper externs

This patch adds proper extern declarations for five variables in
include/linux/vmstat.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/proc_misc.c    | 4 ----
 include/linux/vmstat.h | 6 ++++++
 kernel/sysctl.c        | 2 +-
 mm/vmstat.c            | 1 +
 4 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index c652d469dc0..b14f43d25e9 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -232,7 +232,6 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 #undef K
 }
 
-extern const struct seq_operations fragmentation_op;
 static int fragmentation_open(struct inode *inode, struct file *file)
 {
 	(void)inode;
@@ -246,7 +245,6 @@ static const struct file_operations fragmentation_file_operations = {
 	.release	= seq_release,
 };
 
-extern const struct seq_operations pagetypeinfo_op;
 static int pagetypeinfo_open(struct inode *inode, struct file *file)
 {
 	return seq_open(file, &pagetypeinfo_op);
@@ -259,7 +257,6 @@ static const struct file_operations pagetypeinfo_file_ops = {
 	.release	= seq_release,
 };
 
-extern const struct seq_operations zoneinfo_op;
 static int zoneinfo_open(struct inode *inode, struct file *file)
 {
 	return seq_open(file, &zoneinfo_op);
@@ -356,7 +353,6 @@ static const struct file_operations proc_devinfo_operations = {
 	.release	= seq_release,
 };
 
-extern const struct seq_operations vmstat_op;
 static int vmstat_open(struct inode *inode, struct file *file)
 {
 	return seq_open(file, &vmstat_op);
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index e83b69346d2..58334d43951 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -44,6 +44,12 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
 		NR_VM_EVENT_ITEMS
 };
 
+extern const struct seq_operations fragmentation_op;
+extern const struct seq_operations pagetypeinfo_op;
+extern const struct seq_operations zoneinfo_op;
+extern const struct seq_operations vmstat_op;
+extern int sysctl_stat_interval;
+
 #ifdef CONFIG_VM_EVENT_COUNTERS
 /*
  * Light weight per cpu counter implementation.
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 2a7b9d88706..1f7b3b76a16 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -43,6 +43,7 @@
 #include <linux/limits.h>
 #include <linux/dcache.h>
 #include <linux/syscalls.h>
+#include <linux/vmstat.h>
 #include <linux/nfs_fs.h>
 #include <linux/acpi.h>
 #include <linux/reboot.h>
@@ -80,7 +81,6 @@ extern int sysctl_drop_caches;
 extern int percpu_pagelist_fraction;
 extern int compat_log;
 extern int maps_protect;
-extern int sysctl_stat_interval;
 extern int latencytop_enabled;
 extern int sysctl_nr_open_min, sysctl_nr_open_max;
 #ifdef CONFIG_RCU_TORTURE_TEST
diff --git a/mm/vmstat.c b/mm/vmstat.c
index c3d4a781802..b0d08e667ec 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/cpu.h>
+#include <linux/vmstat.h>
 #include <linux/sched.h>
 
 #ifdef CONFIG_VM_EVENT_COUNTERS
-- 
cgit v1.2.3


From 75353bed36cfbbfb55bbde0896bbf5a02d9ba355 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:27:03 -0700
Subject: mm/hugetlb.c: fix duplicate variable

It's confusing that set_max_huge_pages() contained two different
variables named "ret", and although the code works correctly this should
be fixed.

The inner of the two variables can simply be removed.

Spotted by sparse.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc:  "KOSAKI Motohiro" <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index ab171274ef2..2c5c9ee4220 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -603,7 +603,6 @@ static unsigned long set_max_huge_pages(unsigned long count)
 	}
 
 	while (count > persistent_huge_pages) {
-		int ret;
 		/*
 		 * If this allocation races such that we no longer need the
 		 * page, free_huge_page will handle it by freeing the page
-- 
cgit v1.2.3


From a969e903a944f69309ee5cc9e7c7b08310d1151e Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 23 Jul 2008 21:27:04 -0700
Subject: kill generic_file_direct_IO()

generic_file_direct_IO is a common helper around the invocation of
->direct_IO.  But there's almost nothing shared between the read and write
side, so we're better off without this helper.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/filemap.c | 117 ++++++++++++++++++++++++++---------------------------------
 1 file changed, 51 insertions(+), 66 deletions(-)

diff --git a/mm/filemap.c b/mm/filemap.c
index 65d9d9e2b75..6343f3c841b 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -42,9 +42,6 @@
 
 #include <asm/mman.h>
 
-static ssize_t
-generic_file_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
-	loff_t offset, unsigned long nr_segs);
 
 /*
  * Shared mappings implemented 30.11.1994. It's not fully working yet,
@@ -1205,8 +1202,11 @@ generic_file_aio_read(struct kiocb *iocb, const struct iovec *iov,
 			goto out; /* skip atime */
 		size = i_size_read(inode);
 		if (pos < size) {
-			retval = generic_file_direct_IO(READ, iocb,
-						iov, pos, nr_segs);
+			retval = filemap_write_and_wait(mapping);
+			if (!retval) {
+				retval = mapping->a_ops->direct_IO(READ, iocb,
+							iov, pos, nr_segs);
+			}
 			if (retval > 0)
 				*ppos = pos + retval;
 		}
@@ -2004,11 +2004,55 @@ generic_file_direct_write(struct kiocb *iocb, const struct iovec *iov,
 	struct address_space *mapping = file->f_mapping;
 	struct inode	*inode = mapping->host;
 	ssize_t		written;
+	size_t		write_len;
+	pgoff_t		end;
 
 	if (count != ocount)
 		*nr_segs = iov_shorten((struct iovec *)iov, *nr_segs, count);
 
-	written = generic_file_direct_IO(WRITE, iocb, iov, pos, *nr_segs);
+	/*
+	 * Unmap all mmappings of the file up-front.
+	 *
+	 * This will cause any pte dirty bits to be propagated into the
+	 * pageframes for the subsequent filemap_write_and_wait().
+	 */
+	write_len = iov_length(iov, *nr_segs);
+	end = (pos + write_len - 1) >> PAGE_CACHE_SHIFT;
+	if (mapping_mapped(mapping))
+		unmap_mapping_range(mapping, pos, write_len, 0);
+
+	written = filemap_write_and_wait(mapping);
+	if (written)
+		goto out;
+
+	/*
+	 * After a write we want buffered reads to be sure to go to disk to get
+	 * the new data.  We invalidate clean cached page from the region we're
+	 * about to write.  We do this *before* the write so that we can return
+	 * -EIO without clobbering -EIOCBQUEUED from ->direct_IO().
+	 */
+	if (mapping->nrpages) {
+		written = invalidate_inode_pages2_range(mapping,
+					pos >> PAGE_CACHE_SHIFT, end);
+		if (written)
+			goto out;
+	}
+
+	written = mapping->a_ops->direct_IO(WRITE, iocb, iov, pos, *nr_segs);
+
+	/*
+	 * Finally, try again to invalidate clean pages which might have been
+	 * cached by non-direct readahead, or faulted in by get_user_pages()
+	 * if the source of the write was an mmap'ed region of the file
+	 * we're writing.  Either one is a pretty crazy thing to do,
+	 * so we don't support it 100%.  If this invalidation
+	 * fails, tough, the write still worked...
+	 */
+	if (mapping->nrpages) {
+		invalidate_inode_pages2_range(mapping,
+					      pos >> PAGE_CACHE_SHIFT, end);
+	}
+
 	if (written > 0) {
 		loff_t end = pos + written;
 		if (end > i_size_read(inode) && !S_ISBLK(inode->i_mode)) {
@@ -2024,6 +2068,7 @@ generic_file_direct_write(struct kiocb *iocb, const struct iovec *iov,
 	 * i_mutex is held, which protects generic_osync_inode() from
 	 * livelocking.  AIO O_DIRECT ops attempt to sync metadata here.
 	 */
+out:
 	if ((written >= 0 || written == -EIOCBQUEUED) &&
 	    ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
 		int err = generic_osync_inode(inode, mapping, OSYNC_METADATA);
@@ -2511,66 +2556,6 @@ ssize_t generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
 }
 EXPORT_SYMBOL(generic_file_aio_write);
 
-/*
- * Called under i_mutex for writes to S_ISREG files.   Returns -EIO if something
- * went wrong during pagecache shootdown.
- */
-static ssize_t
-generic_file_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
-	loff_t offset, unsigned long nr_segs)
-{
-	struct file *file = iocb->ki_filp;
-	struct address_space *mapping = file->f_mapping;
-	ssize_t retval;
-	size_t write_len;
-	pgoff_t end = 0; /* silence gcc */
-
-	/*
-	 * If it's a write, unmap all mmappings of the file up-front.  This
-	 * will cause any pte dirty bits to be propagated into the pageframes
-	 * for the subsequent filemap_write_and_wait().
-	 */
-	if (rw == WRITE) {
-		write_len = iov_length(iov, nr_segs);
-		end = (offset + write_len - 1) >> PAGE_CACHE_SHIFT;
-	       	if (mapping_mapped(mapping))
-			unmap_mapping_range(mapping, offset, write_len, 0);
-	}
-
-	retval = filemap_write_and_wait(mapping);
-	if (retval)
-		goto out;
-
-	/*
-	 * After a write we want buffered reads to be sure to go to disk to get
-	 * the new data.  We invalidate clean cached page from the region we're
-	 * about to write.  We do this *before* the write so that we can return
-	 * -EIO without clobbering -EIOCBQUEUED from ->direct_IO().
-	 */
-	if (rw == WRITE && mapping->nrpages) {
-		retval = invalidate_inode_pages2_range(mapping,
-					offset >> PAGE_CACHE_SHIFT, end);
-		if (retval)
-			goto out;
-	}
-
-	retval = mapping->a_ops->direct_IO(rw, iocb, iov, offset, nr_segs);
-
-	/*
-	 * Finally, try again to invalidate clean pages which might have been
-	 * cached by non-direct readahead, or faulted in by get_user_pages()
-	 * if the source of the write was an mmap'ed region of the file
-	 * we're writing.  Either one is a pretty crazy thing to do,
-	 * so we don't support it 100%.  If this invalidation
-	 * fails, tough, the write still worked...
-	 */
-	if (rw == WRITE && mapping->nrpages) {
-		invalidate_inode_pages2_range(mapping, offset >> PAGE_CACHE_SHIFT, end);
-	}
-out:
-	return retval;
-}
-
 /**
  * try_to_release_page() - release old fs-specific metadata on a page
  *
-- 
cgit v1.2.3


From 0d71d10a4252a3938e6b70189bc776171c02e076 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Wed, 23 Jul 2008 21:27:05 -0700
Subject: mm: remove nopfn

There are no users of nopfn in the tree. Remove it.

[hugh@veritas.com: fix build error]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/mm.h |  9 --------
 mm/memory.c        | 67 ++++++------------------------------------------------
 2 files changed, 7 insertions(+), 69 deletions(-)

diff --git a/include/linux/mm.h b/include/linux/mm.h
index 2128ef7780c..eb815cfc1b3 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -166,8 +166,6 @@ struct vm_operations_struct {
 	void (*open)(struct vm_area_struct * area);
 	void (*close)(struct vm_area_struct * area);
 	int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf);
-	unsigned long (*nopfn)(struct vm_area_struct *area,
-			unsigned long address);
 
 	/* notification that a previously read-only page is about to become
 	 * writable, if an error is returned it will cause a SIGBUS */
@@ -674,13 +672,6 @@ static inline int page_mapped(struct page *page)
 	return atomic_read(&(page)->_mapcount) >= 0;
 }
 
-/*
- * Error return values for the *_nopfn functions
- */
-#define NOPFN_SIGBUS	((unsigned long) -1)
-#define NOPFN_OOM	((unsigned long) -2)
-#define NOPFN_REFAULT	((unsigned long) -3)
-
 /*
  * Different kinds of faults, as returned by handle_mm_fault().
  * Used to decide whether a process gets delivered SIGBUS or
diff --git a/mm/memory.c b/mm/memory.c
index 2302d228fe0..46dbed4b744 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1058,11 +1058,9 @@ static inline int use_zero_page(struct vm_area_struct *vma)
 	if (vma->vm_flags & (VM_LOCKED | VM_SHARED))
 		return 0;
 	/*
-	 * And if we have a fault or a nopfn routine, it's not an
-	 * anonymous region.
+	 * And if we have a fault routine, it's not an anonymous region.
 	 */
-	return !vma->vm_ops ||
-		(!vma->vm_ops->fault && !vma->vm_ops->nopfn);
+	return !vma->vm_ops || !vma->vm_ops->fault;
 }
 
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
@@ -1338,6 +1336,11 @@ out:
  *
  * This function should only be called from a vm_ops->fault handler, and
  * in that case the handler should return NULL.
+ *
+ * vma cannot be a COW mapping.
+ *
+ * As this is called only for pages that do not currently exist, we
+ * do not need to flush old virtual caches or the TLB.
  */
 int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr,
 			unsigned long pfn)
@@ -2501,59 +2504,6 @@ static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	return __do_fault(mm, vma, address, pmd, pgoff, flags, orig_pte);
 }
 
-
-/*
- * do_no_pfn() tries to create a new page mapping for a page without
- * a struct_page backing it
- *
- * As this is called only for pages that do not currently exist, we
- * do not need to flush old virtual caches or the TLB.
- *
- * We enter with non-exclusive mmap_sem (to exclude vma changes,
- * but allow concurrent faults), and pte mapped but not yet locked.
- * We return with mmap_sem still held, but pte unmapped and unlocked.
- *
- * It is expected that the ->nopfn handler always returns the same pfn
- * for a given virtual mapping.
- *
- * Mark this `noinline' to prevent it from bloating the main pagefault code.
- */
-static noinline int do_no_pfn(struct mm_struct *mm, struct vm_area_struct *vma,
-		     unsigned long address, pte_t *page_table, pmd_t *pmd,
-		     int write_access)
-{
-	spinlock_t *ptl;
-	pte_t entry;
-	unsigned long pfn;
-
-	pte_unmap(page_table);
-	BUG_ON(!(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)));
-	BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
-
-	pfn = vma->vm_ops->nopfn(vma, address & PAGE_MASK);
-
-	BUG_ON((vma->vm_flags & VM_MIXEDMAP) && pfn_valid(pfn));
-
-	if (unlikely(pfn == NOPFN_OOM))
-		return VM_FAULT_OOM;
-	else if (unlikely(pfn == NOPFN_SIGBUS))
-		return VM_FAULT_SIGBUS;
-	else if (unlikely(pfn == NOPFN_REFAULT))
-		return 0;
-
-	page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
-
-	/* Only go through if we didn't race with anybody else... */
-	if (pte_none(*page_table)) {
-		entry = pfn_pte(pfn, vma->vm_page_prot);
-		if (write_access)
-			entry = maybe_mkwrite(pte_mkdirty(entry), vma);
-		set_pte_at(mm, address, page_table, entry);
-	}
-	pte_unmap_unlock(page_table, ptl);
-	return 0;
-}
-
 /*
  * Fault of a previously existing named mapping. Repopulate the pte
  * from the encoded file_pte if possible. This enables swappable
@@ -2614,9 +2564,6 @@ static inline int handle_pte_fault(struct mm_struct *mm,
 				if (likely(vma->vm_ops->fault))
 					return do_linear_fault(mm, vma, address,
 						pte, pmd, write_access, entry);
-				if (unlikely(vma->vm_ops->nopfn))
-					return do_no_pfn(mm, vma, address, pte,
-							 pmd, write_access);
 			}
 			return do_anonymous_page(mm, vma, address,
 						 pte, pmd, write_access);
-- 
cgit v1.2.3


From 28b2ee20c7cba812b6f2ccf6d722cf86d00a84dc Mon Sep 17 00:00:00 2001
From: Rik van Riel <riel@redhat.com>
Date: Wed, 23 Jul 2008 21:27:05 -0700
Subject: access_process_vm device memory infrastructure

In order to be able to debug things like the X server and programs using
the PPC Cell SPUs, the debugger needs to be able to access device memory
through ptrace and /proc/pid/mem.

This patch:

Add the generic_access_phys access function and put the hooks in place
to allow access_process_vm to access device or PPC Cell SPU memory.

[riel@redhat.com: Add documentation for the vm_ops->access function]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Benjamin Herrensmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/Locking |   7 ++
 arch/Kconfig                      |   3 +
 arch/x86/Kconfig                  |   1 +
 arch/x86/mm/ioremap.c             |   8 +++
 include/asm-x86/io_32.h           |   2 +
 include/asm-x86/io_64.h           |   2 +
 include/linux/mm.h                |   8 +++
 mm/memory.c                       | 131 ++++++++++++++++++++++++++++++++------
 8 files changed, 144 insertions(+), 18 deletions(-)

diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 8b22d7d8b99..680fb566b92 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -510,6 +510,7 @@ prototypes:
 	void (*close)(struct vm_area_struct*);
 	int (*fault)(struct vm_area_struct*, struct vm_fault *);
 	int (*page_mkwrite)(struct vm_area_struct *, struct page *);
+	int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
 
 locking rules:
 		BKL	mmap_sem	PageLocked(page)
@@ -517,6 +518,7 @@ open:		no	yes
 close:		no	yes
 fault:		no	yes
 page_mkwrite:	no	yes		no
+access:		no	yes
 
 	->page_mkwrite() is called when a previously read-only page is
 about to become writeable. The file system is responsible for
@@ -525,6 +527,11 @@ taking to lock out truncate, the page range should be verified to be
 within i_size. The page mapping should also be checked that it is not
 NULL.
 
+	->access() is called when get_user_pages() fails in
+acces_process_vm(), typically used to debug a process through
+/proc/pid/mem or ptrace.  This function is needed only for
+VM_IO | VM_PFNMAP VMAs.
+
 ================================================================================
 			Dubious stuff
 
diff --git a/arch/Kconfig b/arch/Kconfig
index 4d5ebbc1e72..6093c0be58b 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -31,6 +31,9 @@ config KRETPROBES
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
 
+config HAVE_IOREMAP_PROT
+	def_bool n
+
 config HAVE_KPROBES
 	def_bool n
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 03980cb0429..b2ddfcf0172 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -21,6 +21,7 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_DYNAMIC_FTRACE
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 24c1d3c3018..016f335bbee 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -330,6 +330,14 @@ static void __iomem *ioremap_default(resource_size_t phys_addr,
 	return (void __iomem *)ret;
 }
 
+void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
+				unsigned long prot_val)
+{
+	return __ioremap_caller(phys_addr, size, (prot_val & _PAGE_CACHE_MASK),
+				__builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_prot);
+
 /**
  * iounmap - Free a IO remapping
  * @addr: virtual address from ioremap_*
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
index 4df44ed5407..e876d89ac15 100644
--- a/include/asm-x86/io_32.h
+++ b/include/asm-x86/io_32.h
@@ -110,6 +110,8 @@ static inline void *phys_to_virt(unsigned long address)
  */
 extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
 extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
 
 /*
  * The default ioremap() behavior is non-cached:
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
index ddd8058a502..22995c5c5ad 100644
--- a/include/asm-x86/io_64.h
+++ b/include/asm-x86/io_64.h
@@ -175,6 +175,8 @@ extern void early_iounmap(void *addr, unsigned long size);
  */
 extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
 extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
 
 /*
  * The default ioremap() behavior is non-cached:
diff --git a/include/linux/mm.h b/include/linux/mm.h
index eb815cfc1b3..5c7f8f64f70 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -170,6 +170,12 @@ struct vm_operations_struct {
 	/* notification that a previously read-only page is about to become
 	 * writable, if an error is returned it will cause a SIGBUS */
 	int (*page_mkwrite)(struct vm_area_struct *vma, struct page *page);
+
+	/* called by access_process_vm when get_user_pages() fails, typically
+	 * for use by special VMAs that can switch between memory and hardware
+	 */
+	int (*access)(struct vm_area_struct *vma, unsigned long addr,
+		      void *buf, int len, int write);
 #ifdef CONFIG_NUMA
 	/*
 	 * set_policy() op must add a reference to any non-NULL @new mempolicy
@@ -771,6 +777,8 @@ int copy_page_range(struct mm_struct *dst, struct mm_struct *src,
 			struct vm_area_struct *vma);
 void unmap_mapping_range(struct address_space *mapping,
 		loff_t const holebegin, loff_t const holelen, int even_cows);
+int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
+			void *buf, int len, int write);
 
 static inline void unmap_shared_mapping_range(struct address_space *mapping,
 		loff_t const holebegin, loff_t const holelen)
diff --git a/mm/memory.c b/mm/memory.c
index 46dbed4b744..87350321e66 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2751,6 +2751,86 @@ int in_gate_area_no_task(unsigned long addr)
 
 #endif	/* __HAVE_ARCH_GATE_AREA */
 
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+static resource_size_t follow_phys(struct vm_area_struct *vma,
+			unsigned long address, unsigned int flags,
+			unsigned long *prot)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *ptep, pte;
+	spinlock_t *ptl;
+	resource_size_t phys_addr = 0;
+	struct mm_struct *mm = vma->vm_mm;
+
+	VM_BUG_ON(!(vma->vm_flags & (VM_IO | VM_PFNMAP)));
+
+	pgd = pgd_offset(mm, address);
+	if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
+		goto no_page_table;
+
+	pud = pud_offset(pgd, address);
+	if (pud_none(*pud) || unlikely(pud_bad(*pud)))
+		goto no_page_table;
+
+	pmd = pmd_offset(pud, address);
+	if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
+		goto no_page_table;
+
+	/* We cannot handle huge page PFN maps. Luckily they don't exist. */
+	if (pmd_huge(*pmd))
+		goto no_page_table;
+
+	ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
+	if (!ptep)
+		goto out;
+
+	pte = *ptep;
+	if (!pte_present(pte))
+		goto unlock;
+	if ((flags & FOLL_WRITE) && !pte_write(pte))
+		goto unlock;
+	phys_addr = pte_pfn(pte);
+	phys_addr <<= PAGE_SHIFT; /* Shift here to avoid overflow on PAE */
+
+	*prot = pgprot_val(pte_pgprot(pte));
+
+unlock:
+	pte_unmap_unlock(ptep, ptl);
+out:
+	return phys_addr;
+no_page_table:
+	return 0;
+}
+
+int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
+			void *buf, int len, int write)
+{
+	resource_size_t phys_addr;
+	unsigned long prot = 0;
+	void *maddr;
+	int offset = addr & (PAGE_SIZE-1);
+
+	if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+		return -EINVAL;
+
+	phys_addr = follow_phys(vma, addr, write, &prot);
+
+	if (!phys_addr)
+		return -EINVAL;
+
+	maddr = ioremap_prot(phys_addr, PAGE_SIZE, prot);
+	if (write)
+		memcpy_toio(maddr + offset, buf, len);
+	else
+		memcpy_fromio(buf, maddr + offset, len);
+	iounmap(maddr);
+
+	return len;
+}
+#endif
+
 /*
  * Access another process' address space.
  * Source/target buffer must be kernel space,
@@ -2760,7 +2840,6 @@ int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, in
 {
 	struct mm_struct *mm;
 	struct vm_area_struct *vma;
-	struct page *page;
 	void *old_buf = buf;
 
 	mm = get_task_mm(tsk);
@@ -2772,28 +2851,44 @@ int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, in
 	while (len) {
 		int bytes, ret, offset;
 		void *maddr;
+		struct page *page = NULL;
 
 		ret = get_user_pages(tsk, mm, addr, 1,
 				write, 1, &page, &vma);
-		if (ret <= 0)
-			break;
-
-		bytes = len;
-		offset = addr & (PAGE_SIZE-1);
-		if (bytes > PAGE_SIZE-offset)
-			bytes = PAGE_SIZE-offset;
-
-		maddr = kmap(page);
-		if (write) {
-			copy_to_user_page(vma, page, addr,
-					  maddr + offset, buf, bytes);
-			set_page_dirty_lock(page);
+		if (ret <= 0) {
+			/*
+			 * Check if this is a VM_IO | VM_PFNMAP VMA, which
+			 * we can access using slightly different code.
+			 */
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+			vma = find_vma(mm, addr);
+			if (!vma)
+				break;
+			if (vma->vm_ops && vma->vm_ops->access)
+				ret = vma->vm_ops->access(vma, addr, buf,
+							  len, write);
+			if (ret <= 0)
+#endif
+				break;
+			bytes = ret;
 		} else {
-			copy_from_user_page(vma, page, addr,
-					    buf, maddr + offset, bytes);
+			bytes = len;
+			offset = addr & (PAGE_SIZE-1);
+			if (bytes > PAGE_SIZE-offset)
+				bytes = PAGE_SIZE-offset;
+
+			maddr = kmap(page);
+			if (write) {
+				copy_to_user_page(vma, page, addr,
+						  maddr + offset, buf, bytes);
+				set_page_dirty_lock(page);
+			} else {
+				copy_from_user_page(vma, page, addr,
+						    buf, maddr + offset, bytes);
+			}
+			kunmap(page);
+			page_cache_release(page);
 		}
-		kunmap(page);
-		page_cache_release(page);
 		len -= bytes;
 		buf += bytes;
 		addr += bytes;
-- 
cgit v1.2.3


From 7ae8ed5053a39082d224a3f48409e016baca9c16 Mon Sep 17 00:00:00 2001
From: Rik van Riel <riel@redhat.com>
Date: Wed, 23 Jul 2008 21:27:07 -0700
Subject: use generic_access_phys for /dev/mem mappings

Use generic_access_phys as the access_process_vm access function for
/dev/mem mappings.  This makes it possible to debug the X server.

[akpm@linux-foundation.org: repair all the architectures which broke]
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Benjamin Herrensmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/pci/i386.c | 1 +
 drivers/char/mem.c  | 5 ++++-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 2aafb67dc5f..a09505806b8 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -280,6 +280,7 @@ static void pci_track_mmap_page_range(struct vm_area_struct *vma)
 static struct vm_operations_struct pci_mmap_ops = {
 	.open  = pci_track_mmap_page_range,
 	.close = pci_unmap_page_range,
+	.access = generic_access_phys,
 };
 
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index c2dba82eb5f..672b08e694d 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -327,7 +327,10 @@ static void mmap_mem_close(struct vm_area_struct *vma)
 
 static struct vm_operations_struct mmap_mem_ops = {
 	.open  = mmap_mem_open,
-	.close = mmap_mem_close
+	.close = mmap_mem_close,
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+	.access = generic_access_phys
+#endif
 };
 
 static int mmap_mem(struct file * file, struct vm_area_struct * vma)
-- 
cgit v1.2.3


From a1f242ff460e4b50a045fa237c3c56cce9eabf83 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 23 Jul 2008 21:27:08 -0700
Subject: powerpc ioremap_prot

This adds ioremap_prot and pte_pgprot() so that one can extract protection
bits from a PTE and use them to ioremap_prot() (in order to support ptrace
of VM_IO | VM_PFNMAP as per Rik's patch).

This moves a couple of flag checks around in the ioremap implementations
of arch/powerpc.  There's a side effect of allowing non-cacheable and
non-guarded mappings on ppc32 which before would always have _PAGE_GUARDED
set whenever _PAGE_NO_CACHE is.

(standard ioremap will still set _PAGE_GUARDED, but ioremap_prot will be
capable of setting such a non guarded mapping).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/Kconfig                |  1 +
 arch/powerpc/mm/pgtable_32.c        | 22 ++++++++++++++++------
 arch/powerpc/mm/pgtable_64.c        | 16 ++++++++++++++++
 include/asm-powerpc/io.h            |  5 ++++-
 include/asm-powerpc/pgtable-4k.h    |  3 +++
 include/asm-powerpc/pgtable-ppc32.h | 16 ++++++++++++++++
 include/asm-powerpc/pgtable-ppc64.h |  8 ++++++++
 7 files changed, 64 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4d7e2ba10ba..a487671c282 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -111,6 +111,7 @@ config PPC
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
 	select HAVE_IDE
+	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index c7584072dfc..2001abdb191 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -145,13 +145,20 @@ void pte_free(struct mm_struct *mm, pgtable_t ptepage)
 void __iomem *
 ioremap(phys_addr_t addr, unsigned long size)
 {
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
+	return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
 }
 EXPORT_SYMBOL(ioremap);
 
 void __iomem *
 ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
 {
+	/* writeable implies dirty for kernel addresses */
+	if (flags & _PAGE_RW)
+		flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
+
+	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+	flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
+
 	return __ioremap(addr, size, flags);
 }
 EXPORT_SYMBOL(ioremap_flags);
@@ -163,6 +170,14 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 	phys_addr_t p;
 	int err;
 
+	/* Make sure we have the base flags */
+	if ((flags & _PAGE_PRESENT) == 0)
+		flags |= _PAGE_KERNEL;
+
+	/* Non-cacheable page cannot be coherent */
+	if (flags & _PAGE_NO_CACHE)
+		flags &= ~_PAGE_COHERENT;
+
 	/*
 	 * Choose an address to map it to.
 	 * Once the vmalloc system is running, we use it.
@@ -219,11 +234,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 		v = (ioremap_bot -= size);
 	}
 
-	if ((flags & _PAGE_PRESENT) == 0)
-		flags |= _PAGE_KERNEL;
-	if (flags & _PAGE_NO_CACHE)
-		flags |= _PAGE_GUARDED;
-
 	/*
 	 * Should check if it is a candidate for a BAT mapping
 	 */
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 3ef0ad2f9ca..365e61ae5db 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -107,9 +107,18 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size,
 {
 	unsigned long i;
 
+	/* Make sure we have the base flags */
 	if ((flags & _PAGE_PRESENT) == 0)
 		flags |= pgprot_val(PAGE_KERNEL);
 
+	/* Non-cacheable page cannot be coherent */
+	if (flags & _PAGE_NO_CACHE)
+		flags &= ~_PAGE_COHERENT;
+
+	/* We don't support the 4K PFN hack with ioremap */
+	if (flags & _PAGE_4K_PFN)
+		return NULL;
+
 	WARN_ON(pa & ~PAGE_MASK);
 	WARN_ON(((unsigned long)ea) & ~PAGE_MASK);
 	WARN_ON(size & ~PAGE_MASK);
@@ -190,6 +199,13 @@ void __iomem * ioremap(phys_addr_t addr, unsigned long size)
 void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
 			     unsigned long flags)
 {
+	/* writeable implies dirty for kernel addresses */
+	if (flags & _PAGE_RW)
+		flags |= _PAGE_DIRTY;
+
+	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+	flags &= ~(_PAGE_USER | _PAGE_EXEC);
+
 	if (ppc_md.ioremap)
 		return ppc_md.ioremap(addr, size, flags);
 	return __ioremap(addr, size, flags);
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index 8b627823f5f..77c7fa025e6 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -617,7 +617,8 @@ static inline void iosync(void)
  *   and can be hooked by the platform via ppc_md
  *
  * * ioremap_flags allows to specify the page flags as an argument and can
- *   also be hooked by the platform via ppc_md
+ *   also be hooked by the platform via ppc_md. ioremap_prot is the exact
+ *   same thing as ioremap_flags.
  *
  * * ioremap_nocache is identical to ioremap
  *
@@ -639,6 +640,8 @@ extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
 extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
 				   unsigned long flags);
 #define ioremap_nocache(addr, size)	ioremap((addr), (size))
+#define ioremap_prot(addr, size, prot)	ioremap_flags((addr), (size), (prot))
+
 extern void iounmap(volatile void __iomem *addr);
 
 extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h
index fd2090dc1dc..c9601dfb4a1 100644
--- a/include/asm-powerpc/pgtable-4k.h
+++ b/include/asm-powerpc/pgtable-4k.h
@@ -51,6 +51,9 @@
 #define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
 			 _PAGE_SECONDARY | _PAGE_GROUP_IX)
 
+/* There is no 4K PFN hack on 4K pages */
+#define _PAGE_4K_PFN	0
+
 /* PAGE_MASK gives the right answer below, but only by accident */
 /* It should be preserving the high 48 bits and then specifically */
 /* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 3a96d001cb7..bdbab72f3eb 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -395,6 +395,12 @@ extern int icache_44x_need_flush;
 #ifndef _PAGE_EXEC
 #define _PAGE_EXEC	0
 #endif
+#ifndef _PAGE_ENDIAN
+#define _PAGE_ENDIAN	0
+#endif
+#ifndef _PAGE_COHERENT
+#define _PAGE_COHERENT	0
+#endif
 #ifndef _PMD_PRESENT_MASK
 #define _PMD_PRESENT_MASK	_PMD_PRESENT
 #endif
@@ -405,6 +411,12 @@ extern int icache_44x_need_flush;
 
 #define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
 
+
+#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+				 _PAGE_WRITETHRU | _PAGE_ENDIAN | \
+				 _PAGE_USER | _PAGE_ACCESSED | \
+				 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
+				 _PAGE_EXEC | _PAGE_HWEXEC)
 /*
  * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
  * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
@@ -538,6 +550,10 @@ static inline pte_t pte_mkyoung(pte_t pte) {
 	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
 static inline pte_t pte_mkspecial(pte_t pte) {
 	return pte; }
+static inline unsigned long pte_pgprot(pte_t pte)
+{
+	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+}
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
index ab98a9c80b2..ba8000352b9 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/include/asm-powerpc/pgtable-ppc64.h
@@ -117,6 +117,10 @@
 #define PAGE_AGP	__pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
 #define HAVE_PAGE_AGP
 
+#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \
+				 _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
+				 _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
+ 				 _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
 /* PTEIDX nibble */
 #define _PTEIDX_SECONDARY	0x8
 #define _PTEIDX_GROUP_IX	0x7
@@ -262,6 +266,10 @@ static inline pte_t pte_mkhuge(pte_t pte) {
 	return pte; }
 static inline pte_t pte_mkspecial(pte_t pte) {
 	return pte; }
+static inline unsigned long pte_pgprot(pte_t pte)
+{
+	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+}
 
 /* Atomic PTE updates */
 static inline unsigned long pte_update(struct mm_struct *mm,
-- 
cgit v1.2.3


From a352894d07059649398c4769dc8b645e1a1dad88 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 23 Jul 2008 21:27:09 -0700
Subject: spufs: use new vm_ops->access to allow local state access from gdb

This uses the new vm_ops->access to allow gdb to access the SPU local
store.  We currently prevent access to problem state registers, this can
be done later if really needed but it's safer not to.

[akpm@linux-foundation.org: fix typo]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/platforms/cell/spufs/file.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 99c73066b82..010a51f5979 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -288,9 +288,32 @@ spufs_mem_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	return VM_FAULT_NOPAGE;
 }
 
+static int spufs_mem_mmap_access(struct vm_area_struct *vma,
+				unsigned long address,
+				void *buf, int len, int write)
+{
+	struct spu_context *ctx = vma->vm_file->private_data;
+	unsigned long offset = address - vma->vm_start;
+	char *local_store;
+
+	if (write && !(vma->vm_flags & VM_WRITE))
+		return -EACCES;
+	if (spu_acquire(ctx))
+		return -EINTR;
+	if ((offset + len) > vma->vm_end)
+		len = vma->vm_end - offset;
+	local_store = ctx->ops->get_ls(ctx);
+	if (write)
+		memcpy_toio(local_store + offset, buf, len);
+	else
+		memcpy_fromio(buf, local_store + offset, len);
+	spu_release(ctx);
+	return len;
+}
 
 static struct vm_operations_struct spufs_mem_mmap_vmops = {
 	.fault = spufs_mem_mmap_fault,
+	.access = spufs_mem_mmap_access,
 };
 
 static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
-- 
cgit v1.2.3


From 42b7772812d15b86543a23b82bd6070eef9a08b1 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Wed, 23 Jul 2008 21:27:10 -0700
Subject: mm: remove double indirection on tlb parameter to free_pgd_range() &
 Co

The double indirection here is not needed anywhere and hence (at least)
confusing.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/mm/hugetlbpage.c    |  2 +-
 arch/powerpc/mm/hugetlbpage.c |  8 ++++----
 fs/exec.c                     |  4 ++--
 include/asm-ia64/hugetlb.h    |  2 +-
 include/asm-powerpc/hugetlb.h |  2 +-
 include/asm-sh/hugetlb.h      |  2 +-
 include/asm-sparc/hugetlb.h   |  2 +-
 include/asm-x86/hugetlb.h     |  2 +-
 include/linux/mm.h            |  4 +---
 mm/internal.h                 |  3 +++
 mm/memory.c                   | 10 ++++++----
 mm/mmap.c                     |  6 ++++--
 12 files changed, 26 insertions(+), 21 deletions(-)

diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index d3ce8f3bcaa..cd49e2860ee 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -112,7 +112,7 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int wri
 	return NULL;
 }
 
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			unsigned long addr, unsigned long end,
 			unsigned long floor, unsigned long ceiling)
 {
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 0d12fba31bc..1a96cc891cf 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -255,7 +255,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
  *
  * Must be called with pagetable lock held.
  */
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			    unsigned long addr, unsigned long end,
 			    unsigned long floor, unsigned long ceiling)
 {
@@ -315,13 +315,13 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb,
 		return;
 
 	start = addr;
-	pgd = pgd_offset((*tlb)->mm, addr);
+	pgd = pgd_offset(tlb->mm, addr);
 	do {
-		BUG_ON(get_slice_psize((*tlb)->mm, addr) != mmu_huge_psize);
+		BUG_ON(get_slice_psize(tlb->mm, addr) != mmu_huge_psize);
 		next = pgd_addr_end(addr, end);
 		if (pgd_none_or_clear_bad(pgd))
 			continue;
-		hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
+		hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
 	} while (pgd++, addr = next, addr != end);
 }
 
diff --git a/fs/exec.c b/fs/exec.c
index fd9234379e8..190ed1f9277 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -541,7 +541,7 @@ static int shift_arg_pages(struct vm_area_struct *vma, unsigned long shift)
 		/*
 		 * when the old and new regions overlap clear from new_end.
 		 */
-		free_pgd_range(&tlb, new_end, old_end, new_end,
+		free_pgd_range(tlb, new_end, old_end, new_end,
 			vma->vm_next ? vma->vm_next->vm_start : 0);
 	} else {
 		/*
@@ -550,7 +550,7 @@ static int shift_arg_pages(struct vm_area_struct *vma, unsigned long shift)
 		 * have constraints on va-space that make this illegal (IA64) -
 		 * for the others its just a little faster.
 		 */
-		free_pgd_range(&tlb, old_start, old_end, new_end,
+		free_pgd_range(tlb, old_start, old_end, new_end,
 			vma->vm_next ? vma->vm_next->vm_start : 0);
 	}
 	tlb_finish_mmu(tlb, new_end, old_end);
diff --git a/include/asm-ia64/hugetlb.h b/include/asm-ia64/hugetlb.h
index f28a9701f1c..e9d1e5e2382 100644
--- a/include/asm-ia64/hugetlb.h
+++ b/include/asm-ia64/hugetlb.h
@@ -4,7 +4,7 @@
 #include <asm/page.h>
 
 
-void hugetlb_free_pgd_range(struct mmu_gather **tlb, unsigned long addr,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
 			    unsigned long end, unsigned long floor,
 			    unsigned long ceiling);
 
diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h
index be32ff02f4a..0a37aa5ecaa 100644
--- a/include/asm-powerpc/hugetlb.h
+++ b/include/asm-powerpc/hugetlb.h
@@ -7,7 +7,7 @@
 int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
 			   unsigned long len);
 
-void hugetlb_free_pgd_range(struct mmu_gather **tlb, unsigned long addr,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
 			    unsigned long end, unsigned long floor,
 			    unsigned long ceiling);
 
diff --git a/include/asm-sh/hugetlb.h b/include/asm-sh/hugetlb.h
index 02402303d89..fb30018938c 100644
--- a/include/asm-sh/hugetlb.h
+++ b/include/asm-sh/hugetlb.h
@@ -26,7 +26,7 @@ static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
 static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) {
 }
 
-static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 					  unsigned long addr, unsigned long end,
 					  unsigned long floor,
 					  unsigned long ceiling)
diff --git a/include/asm-sparc/hugetlb.h b/include/asm-sparc/hugetlb.h
index 412af58926a..aeb92374ca3 100644
--- a/include/asm-sparc/hugetlb.h
+++ b/include/asm-sparc/hugetlb.h
@@ -31,7 +31,7 @@ static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
 	return 0;
 }
 
-static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 					  unsigned long addr, unsigned long end,
 					  unsigned long floor,
 					  unsigned long ceiling)
diff --git a/include/asm-x86/hugetlb.h b/include/asm-x86/hugetlb.h
index 14171a4924f..7eed6e0883b 100644
--- a/include/asm-x86/hugetlb.h
+++ b/include/asm-x86/hugetlb.h
@@ -26,7 +26,7 @@ static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
 static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) {
 }
 
-static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 					  unsigned long addr, unsigned long end,
 					  unsigned long floor,
 					  unsigned long ceiling)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 5c7f8f64f70..f8071097302 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -769,10 +769,8 @@ struct mm_walk {
 
 int walk_page_range(unsigned long addr, unsigned long end,
 		struct mm_walk *walk);
-void free_pgd_range(struct mmu_gather **tlb, unsigned long addr,
+void free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
 		unsigned long end, unsigned long floor, unsigned long ceiling);
-void free_pgtables(struct mmu_gather **tlb, struct vm_area_struct *start_vma,
-		unsigned long floor, unsigned long ceiling);
 int copy_page_range(struct mm_struct *dst, struct mm_struct *src,
 			struct vm_area_struct *vma);
 void unmap_mapping_range(struct address_space *mapping,
diff --git a/mm/internal.h b/mm/internal.h
index 50807e12490..858ad01864d 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -13,6 +13,9 @@
 
 #include <linux/mm.h>
 
+void free_pgtables(struct mmu_gather *tlb, struct vm_area_struct *start_vma,
+		unsigned long floor, unsigned long ceiling);
+
 static inline void set_page_count(struct page *page, int v)
 {
 	atomic_set(&page->_count, v);
diff --git a/mm/memory.c b/mm/memory.c
index 87350321e66..82f3f1c5cf1 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -61,6 +61,8 @@
 #include <linux/swapops.h>
 #include <linux/elf.h>
 
+#include "internal.h"
+
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 /* use the per-pgdat data instead for discontigmem - mbligh */
 unsigned long max_mapnr;
@@ -211,7 +213,7 @@ static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
  *
  * Must be called with pagetable lock held.
  */
-void free_pgd_range(struct mmu_gather **tlb,
+void free_pgd_range(struct mmu_gather *tlb,
 			unsigned long addr, unsigned long end,
 			unsigned long floor, unsigned long ceiling)
 {
@@ -262,16 +264,16 @@ void free_pgd_range(struct mmu_gather **tlb,
 		return;
 
 	start = addr;
-	pgd = pgd_offset((*tlb)->mm, addr);
+	pgd = pgd_offset(tlb->mm, addr);
 	do {
 		next = pgd_addr_end(addr, end);
 		if (pgd_none_or_clear_bad(pgd))
 			continue;
-		free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
+		free_pud_range(tlb, pgd, addr, next, floor, ceiling);
 	} while (pgd++, addr = next, addr != end);
 }
 
-void free_pgtables(struct mmu_gather **tlb, struct vm_area_struct *vma,
+void free_pgtables(struct mmu_gather *tlb, struct vm_area_struct *vma,
 		unsigned long floor, unsigned long ceiling)
 {
 	while (vma) {
diff --git a/mm/mmap.c b/mm/mmap.c
index 1d102b956fd..75e0d0673d7 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -32,6 +32,8 @@
 #include <asm/tlb.h>
 #include <asm/mmu_context.h>
 
+#include "internal.h"
+
 #ifndef arch_mmap_check
 #define arch_mmap_check(addr, len, flags)	(0)
 #endif
@@ -1763,7 +1765,7 @@ static void unmap_region(struct mm_struct *mm,
 	update_hiwater_rss(mm);
 	unmap_vmas(&tlb, vma, start, end, &nr_accounted, NULL);
 	vm_unacct_memory(nr_accounted);
-	free_pgtables(&tlb, vma, prev? prev->vm_end: FIRST_USER_ADDRESS,
+	free_pgtables(tlb, vma, prev? prev->vm_end: FIRST_USER_ADDRESS,
 				 next? next->vm_start: 0);
 	tlb_finish_mmu(tlb, start, end);
 }
@@ -2063,7 +2065,7 @@ void exit_mmap(struct mm_struct *mm)
 	/* Use -1 here to ensure all VMAs in the mm are unmapped */
 	end = unmap_vmas(&tlb, vma, 0, -1, &nr_accounted, NULL);
 	vm_unacct_memory(nr_accounted);
-	free_pgtables(&tlb, vma, FIRST_USER_ADDRESS, 0);
+	free_pgtables(tlb, vma, FIRST_USER_ADDRESS, 0);
 	tlb_finish_mmu(tlb, 0, end);
 
 	/*
-- 
cgit v1.2.3


From 3c82d0ce2c4f642b2f24ef98707a030543b06b90 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:27:11 -0700
Subject: buddy: clarify comments describing buddy merge

In __free_one_page(), the comment "Move the buddy up one level" appears
attached to the break and by implication when the break is taken we are
moving it up one level:

	if (!page_is_buddy(page, buddy, order))
		break;          /* Move the buddy up one level. */

In reality the inverse is true, we break out when we can no longer merge
this page with its buddy.  Looking back into pre-history (into the full
git history) it appears that these two lines accidentally got joined as
part of another change.

Move the comment down where it belongs below the if and clarify its
language.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 35b1347d81b..24aa3d1b9d9 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -432,8 +432,9 @@ static inline void __free_one_page(struct page *page,
 
 		buddy = __page_find_buddy(page, page_idx, order);
 		if (!page_is_buddy(page, buddy, order))
-			break;		/* Move the buddy up one level. */
+			break;
 
+		/* Our buddy is free, merge with it and move up one order. */
 		list_del(&buddy->lru);
 		zone->free_area[order].nr_free--;
 		rmv_page_order(buddy);
-- 
cgit v1.2.3


From da3bbdd4632c0171406b2677e31494afa5bde2f8 Mon Sep 17 00:00:00 2001
From: Kentaro Makita <k-makita@np.css.fujitsu.com>
Date: Wed, 23 Jul 2008 21:27:13 -0700
Subject: fix soft lock up at NFS mount via per-SB LRU-list of unused dentries

[Summary]

 Split LRU-list of unused dentries to one per superblock to avoid soft
 lock up during NFS mounts and remounting of any filesystem.

 Previously I posted here:
 http://lkml.org/lkml/2008/3/5/590

[Descriptions]

- background

  dentry_unused is a list of dentries which are not referenced.
  dentry_unused grows up when references on directories or files are
  released.  This list can be very long if there is huge free memory.

- the problem

  When shrink_dcache_sb() is called, it scans all dentry_unused linearly
  under spin_lock(), and if dentry->d_sb is differnt from given
  superblock, scan next dentry.  This scan costs very much if there are
  many entries, and very ineffective if there are many superblocks.

  IOW, When we need to shrink unused dentries on one dentry, but scans
  unused dentries on all superblocks in the system.  For example, we scan
  500 dentries to unmount a filesystem, but scans 1,000,000 or more unused
  dentries on other superblocks.

  In our case , At mounting NFS*, shrink_dcache_sb() is called to shrink
  unused dentries on NFS, but scans 100,000,000 unused dentries on
  superblocks in the system such as local ext3 filesystems.  I hear NFS
  mounting took 1 min on some system in use.

* : NFS uses virtual filesystem in rpc layer, so NFS is affected by
  this problem.

  100,000,000 is possible number on large systems.

  Per-superblock LRU of unused dentried can reduce the cost in
  reasonable manner.

- How to fix

  I found this problem is solved by David Chinner's "Per-superblock
  unused dentry LRU lists V3"(1), so I rebase it and add some fix to
  reclaim with fairness, which is in Andrew Morton's comments(2).

  1) http://lkml.org/lkml/2006/5/25/318
  2) http://lkml.org/lkml/2006/5/25/320

  Split LRU-list of unused dentries to each superblocks.  Then, NFS
  mounting will check dentries under a superblock instead of all.  But
  this spliting will break LRU of dentry-unused.  So, I've attempted to
  make reclaim unused dentrins with fairness by calculate number of
  dentries to scan on this sb based on following way

  number of dentries to scan on this sb =
  count * (number of dentries on this sb / number of dentries in the machine)

- ToDo
 - I have to measuring performance number and do stress tests.

 - When unmount occurs during prune_dcache(), scanning on same
  superblock, It is unable to reach next superblock because it is gone
  away.  We restart scannig superblock from first one, it causes
  unfairness of reclaim unused dentries on first superblock.  But I think
  this happens very rarely.

- Test Results

  Result on 6GB boxes with excessive unused dentries.

Without patch:

$ cat /proc/sys/fs/dentry-state
10181835        10180203        45      0       0       0
# mount -t nfs 10.124.60.70:/work/kernel-src nfs
real    0m1.830s
user    0m0.001s
sys     0m1.653s

 With this patch:
$ cat /proc/sys/fs/dentry-state
10236610        10234751        45      0       0       0
# mount -t nfs 10.124.60.70:/work/kernel-src nfs
real    0m0.106s
user    0m0.002s
sys     0m0.032s

[akpm@linux-foundation.org: fix comments]
Signed-off-by: Kentaro Makita <k-makita@np.css.fujitsu.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: David Chinner <dgc@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/dcache.c        | 335 ++++++++++++++++++++++++++++-------------------------
 fs/super.c         |   1 +
 include/linux/fs.h |   4 +
 3 files changed, 185 insertions(+), 155 deletions(-)

diff --git a/fs/dcache.c b/fs/dcache.c
index 6068c25b393..3818d6ab76c 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -61,7 +61,6 @@ static struct kmem_cache *dentry_cache __read_mostly;
 static unsigned int d_hash_mask __read_mostly;
 static unsigned int d_hash_shift __read_mostly;
 static struct hlist_head *dentry_hashtable __read_mostly;
-static LIST_HEAD(dentry_unused);
 
 /* Statistics gathering. */
 struct dentry_stat_t dentry_stat = {
@@ -96,14 +95,6 @@ static void d_free(struct dentry *dentry)
 		call_rcu(&dentry->d_u.d_rcu, d_callback);
 }
 
-static void dentry_lru_remove(struct dentry *dentry)
-{
-	if (!list_empty(&dentry->d_lru)) {
-		list_del_init(&dentry->d_lru);
-		dentry_stat.nr_unused--;
-	}
-}
-
 /*
  * Release the dentry's inode, using the filesystem
  * d_iput() operation if defined.
@@ -130,6 +121,41 @@ static void dentry_iput(struct dentry * dentry)
 	}
 }
 
+/*
+ * dentry_lru_(add|add_tail|del|del_init) must be called with dcache_lock held.
+ */
+static void dentry_lru_add(struct dentry *dentry)
+{
+	list_add(&dentry->d_lru, &dentry->d_sb->s_dentry_lru);
+	dentry->d_sb->s_nr_dentry_unused++;
+	dentry_stat.nr_unused++;
+}
+
+static void dentry_lru_add_tail(struct dentry *dentry)
+{
+	list_add_tail(&dentry->d_lru, &dentry->d_sb->s_dentry_lru);
+	dentry->d_sb->s_nr_dentry_unused++;
+	dentry_stat.nr_unused++;
+}
+
+static void dentry_lru_del(struct dentry *dentry)
+{
+	if (!list_empty(&dentry->d_lru)) {
+		list_del(&dentry->d_lru);
+		dentry->d_sb->s_nr_dentry_unused--;
+		dentry_stat.nr_unused--;
+	}
+}
+
+static void dentry_lru_del_init(struct dentry *dentry)
+{
+	if (likely(!list_empty(&dentry->d_lru))) {
+		list_del_init(&dentry->d_lru);
+		dentry->d_sb->s_nr_dentry_unused--;
+		dentry_stat.nr_unused--;
+	}
+}
+
 /**
  * d_kill - kill dentry and return parent
  * @dentry: dentry to kill
@@ -212,8 +238,7 @@ repeat:
 		goto kill_it;
   	if (list_empty(&dentry->d_lru)) {
   		dentry->d_flags |= DCACHE_REFERENCED;
-  		list_add(&dentry->d_lru, &dentry_unused);
-  		dentry_stat.nr_unused++;
+		dentry_lru_add(dentry);
   	}
  	spin_unlock(&dentry->d_lock);
 	spin_unlock(&dcache_lock);
@@ -222,7 +247,8 @@ repeat:
 unhash_it:
 	__d_drop(dentry);
 kill_it:
-	dentry_lru_remove(dentry);
+	/* if dentry was on the d_lru list delete it from there */
+	dentry_lru_del(dentry);
 	dentry = d_kill(dentry);
 	if (dentry)
 		goto repeat;
@@ -290,7 +316,7 @@ int d_invalidate(struct dentry * dentry)
 static inline struct dentry * __dget_locked(struct dentry *dentry)
 {
 	atomic_inc(&dentry->d_count);
-	dentry_lru_remove(dentry);
+	dentry_lru_del_init(dentry);
 	return dentry;
 }
 
@@ -406,133 +432,167 @@ static void prune_one_dentry(struct dentry * dentry)
 
 		if (dentry->d_op && dentry->d_op->d_delete)
 			dentry->d_op->d_delete(dentry);
-		dentry_lru_remove(dentry);
+		dentry_lru_del_init(dentry);
 		__d_drop(dentry);
 		dentry = d_kill(dentry);
 		spin_lock(&dcache_lock);
 	}
 }
 
-/**
- * prune_dcache - shrink the dcache
- * @count: number of entries to try and free
- * @sb: if given, ignore dentries for other superblocks
- *         which are being unmounted.
- *
- * Shrink the dcache. This is done when we need
- * more memory, or simply when we need to unmount
- * something (at which point we need to unuse
- * all dentries).
- *
- * This function may fail to free any resources if
- * all the dentries are in use.
+/*
+ * Shrink the dentry LRU on a given superblock.
+ * @sb   : superblock to shrink dentry LRU.
+ * @count: If count is NULL, we prune all dentries on superblock.
+ * @flags: If flags is non-zero, we need to do special processing based on
+ * which flags are set. This means we don't need to maintain multiple
+ * similar copies of this loop.
  */
- 
-static void prune_dcache(int count, struct super_block *sb)
+static void __shrink_dcache_sb(struct super_block *sb, int *count, int flags)
 {
-	spin_lock(&dcache_lock);
-	for (; count ; count--) {
-		struct dentry *dentry;
-		struct list_head *tmp;
-		struct rw_semaphore *s_umount;
-
-		cond_resched_lock(&dcache_lock);
+	LIST_HEAD(referenced);
+	LIST_HEAD(tmp);
+	struct dentry *dentry;
+	int cnt = 0;
 
-		tmp = dentry_unused.prev;
-		if (sb) {
-			/* Try to find a dentry for this sb, but don't try
-			 * too hard, if they aren't near the tail they will
-			 * be moved down again soon
+	BUG_ON(!sb);
+	BUG_ON((flags & DCACHE_REFERENCED) && count == NULL);
+	spin_lock(&dcache_lock);
+	if (count != NULL)
+		/* called from prune_dcache() and shrink_dcache_parent() */
+		cnt = *count;
+restart:
+	if (count == NULL)
+		list_splice_init(&sb->s_dentry_lru, &tmp);
+	else {
+		while (!list_empty(&sb->s_dentry_lru)) {
+			dentry = list_entry(sb->s_dentry_lru.prev,
+					struct dentry, d_lru);
+			BUG_ON(dentry->d_sb != sb);
+
+			spin_lock(&dentry->d_lock);
+			/*
+			 * If we are honouring the DCACHE_REFERENCED flag and
+			 * the dentry has this flag set, don't free it. Clear
+			 * the flag and put it back on the LRU.
 			 */
-			int skip = count;
-			while (skip && tmp != &dentry_unused &&
-			    list_entry(tmp, struct dentry, d_lru)->d_sb != sb) {
-				skip--;
-				tmp = tmp->prev;
+			if ((flags & DCACHE_REFERENCED)
+				&& (dentry->d_flags & DCACHE_REFERENCED)) {
+				dentry->d_flags &= ~DCACHE_REFERENCED;
+				list_move_tail(&dentry->d_lru, &referenced);
+				spin_unlock(&dentry->d_lock);
+			} else {
+				list_move_tail(&dentry->d_lru, &tmp);
+				spin_unlock(&dentry->d_lock);
+				cnt--;
+				if (!cnt)
+					break;
 			}
 		}
-		if (tmp == &dentry_unused)
-			break;
-		list_del_init(tmp);
-		prefetch(dentry_unused.prev);
- 		dentry_stat.nr_unused--;
-		dentry = list_entry(tmp, struct dentry, d_lru);
-
- 		spin_lock(&dentry->d_lock);
+	}
+	while (!list_empty(&tmp)) {
+		dentry = list_entry(tmp.prev, struct dentry, d_lru);
+		dentry_lru_del_init(dentry);
+		spin_lock(&dentry->d_lock);
 		/*
 		 * We found an inuse dentry which was not removed from
-		 * dentry_unused because of laziness during lookup.  Do not free
-		 * it - just keep it off the dentry_unused list.
+		 * the LRU because of laziness during lookup.  Do not free
+		 * it - just keep it off the LRU list.
 		 */
- 		if (atomic_read(&dentry->d_count)) {
- 			spin_unlock(&dentry->d_lock);
+		if (atomic_read(&dentry->d_count)) {
+			spin_unlock(&dentry->d_lock);
 			continue;
 		}
-		/* If the dentry was recently referenced, don't free it. */
-		if (dentry->d_flags & DCACHE_REFERENCED) {
-			dentry->d_flags &= ~DCACHE_REFERENCED;
- 			list_add(&dentry->d_lru, &dentry_unused);
- 			dentry_stat.nr_unused++;
- 			spin_unlock(&dentry->d_lock);
+		prune_one_dentry(dentry);
+		/* dentry->d_lock was dropped in prune_one_dentry() */
+		cond_resched_lock(&dcache_lock);
+	}
+	if (count == NULL && !list_empty(&sb->s_dentry_lru))
+		goto restart;
+	if (count != NULL)
+		*count = cnt;
+	if (!list_empty(&referenced))
+		list_splice(&referenced, &sb->s_dentry_lru);
+	spin_unlock(&dcache_lock);
+}
+
+/**
+ * prune_dcache - shrink the dcache
+ * @count: number of entries to try to free
+ *
+ * Shrink the dcache. This is done when we need more memory, or simply when we
+ * need to unmount something (at which point we need to unuse all dentries).
+ *
+ * This function may fail to free any resources if all the dentries are in use.
+ */
+static void prune_dcache(int count)
+{
+	struct super_block *sb;
+	int w_count;
+	int unused = dentry_stat.nr_unused;
+	int prune_ratio;
+	int pruned;
+
+	if (unused == 0 || count == 0)
+		return;
+	spin_lock(&dcache_lock);
+restart:
+	if (count >= unused)
+		prune_ratio = 1;
+	else
+		prune_ratio = unused / count;
+	spin_lock(&sb_lock);
+	list_for_each_entry(sb, &super_blocks, s_list) {
+		if (sb->s_nr_dentry_unused == 0)
 			continue;
-		}
-		/*
-		 * If the dentry is not DCACHED_REFERENCED, it is time
-		 * to remove it from the dcache, provided the super block is
-		 * NULL (which means we are trying to reclaim memory)
-		 * or this dentry belongs to the same super block that
-		 * we want to shrink.
-		 */
-		/*
-		 * If this dentry is for "my" filesystem, then I can prune it
-		 * without taking the s_umount lock (I already hold it).
+		sb->s_count++;
+		/* Now, we reclaim unused dentrins with fairness.
+		 * We reclaim them same percentage from each superblock.
+		 * We calculate number of dentries to scan on this sb
+		 * as follows, but the implementation is arranged to avoid
+		 * overflows:
+		 * number of dentries to scan on this sb =
+		 * count * (number of dentries on this sb /
+		 * number of dentries in the machine)
 		 */
-		if (sb && dentry->d_sb == sb) {
-			prune_one_dentry(dentry);
-			continue;
-		}
+		spin_unlock(&sb_lock);
+		if (prune_ratio != 1)
+			w_count = (sb->s_nr_dentry_unused / prune_ratio) + 1;
+		else
+			w_count = sb->s_nr_dentry_unused;
+		pruned = w_count;
 		/*
-		 * ...otherwise we need to be sure this filesystem isn't being
-		 * unmounted, otherwise we could race with
-		 * generic_shutdown_super(), and end up holding a reference to
-		 * an inode while the filesystem is unmounted.
-		 * So we try to get s_umount, and make sure s_root isn't NULL.
-		 * (Take a local copy of s_umount to avoid a use-after-free of
-		 * `dentry').
+		 * We need to be sure this filesystem isn't being unmounted,
+		 * otherwise we could race with generic_shutdown_super(), and
+		 * end up holding a reference to an inode while the filesystem
+		 * is unmounted.  So we try to get s_umount, and make sure
+		 * s_root isn't NULL.
 		 */
-		s_umount = &dentry->d_sb->s_umount;
-		if (down_read_trylock(s_umount)) {
-			if (dentry->d_sb->s_root != NULL) {
-				prune_one_dentry(dentry);
-				up_read(s_umount);
-				continue;
+		if (down_read_trylock(&sb->s_umount)) {
+			if ((sb->s_root != NULL) &&
+			    (!list_empty(&sb->s_dentry_lru))) {
+				spin_unlock(&dcache_lock);
+				__shrink_dcache_sb(sb, &w_count,
+						DCACHE_REFERENCED);
+				pruned -= w_count;
+				spin_lock(&dcache_lock);
 			}
-			up_read(s_umount);
+			up_read(&sb->s_umount);
 		}
-		spin_unlock(&dentry->d_lock);
+		spin_lock(&sb_lock);
+		count -= pruned;
 		/*
-		 * Insert dentry at the head of the list as inserting at the
-		 * tail leads to a cycle.
+		 * restart only when sb is no longer on the list and
+		 * we have more work to do.
 		 */
- 		list_add(&dentry->d_lru, &dentry_unused);
-		dentry_stat.nr_unused++;
+		if (__put_super_and_need_restart(sb) && count > 0) {
+			spin_unlock(&sb_lock);
+			goto restart;
+		}
 	}
+	spin_unlock(&sb_lock);
 	spin_unlock(&dcache_lock);
 }
 
-/*
- * Shrink the dcache for the specified super block.
- * This allows us to unmount a device without disturbing
- * the dcache for the other devices.
- *
- * This implementation makes just two traversals of the
- * unused list.  On the first pass we move the selected
- * dentries to the most recent end, and on the second
- * pass we free them.  The second pass must restart after
- * each dput(), but since the target dentries are all at
- * the end, it's really just a single traversal.
- */
-
 /**
  * shrink_dcache_sb - shrink dcache for a superblock
  * @sb: superblock
@@ -541,44 +601,9 @@ static void prune_dcache(int count, struct super_block *sb)
  * is used to free the dcache before unmounting a file
  * system
  */
-
 void shrink_dcache_sb(struct super_block * sb)
 {
-	struct list_head *tmp, *next;
-	struct dentry *dentry;
-
-	/*
-	 * Pass one ... move the dentries for the specified
-	 * superblock to the most recent end of the unused list.
-	 */
-	spin_lock(&dcache_lock);
-	list_for_each_prev_safe(tmp, next, &dentry_unused) {
-		dentry = list_entry(tmp, struct dentry, d_lru);
-		if (dentry->d_sb != sb)
-			continue;
-		list_move_tail(tmp, &dentry_unused);
-	}
-
-	/*
-	 * Pass two ... free the dentries for this superblock.
-	 */
-repeat:
-	list_for_each_prev_safe(tmp, next, &dentry_unused) {
-		dentry = list_entry(tmp, struct dentry, d_lru);
-		if (dentry->d_sb != sb)
-			continue;
-		dentry_stat.nr_unused--;
-		list_del_init(tmp);
-		spin_lock(&dentry->d_lock);
-		if (atomic_read(&dentry->d_count)) {
-			spin_unlock(&dentry->d_lock);
-			continue;
-		}
-		prune_one_dentry(dentry);
-		cond_resched_lock(&dcache_lock);
-		goto repeat;
-	}
-	spin_unlock(&dcache_lock);
+	__shrink_dcache_sb(sb, NULL, 0);
 }
 
 /*
@@ -595,7 +620,7 @@ static void shrink_dcache_for_umount_subtree(struct dentry *dentry)
 
 	/* detach this root from the system */
 	spin_lock(&dcache_lock);
-	dentry_lru_remove(dentry);
+	dentry_lru_del_init(dentry);
 	__d_drop(dentry);
 	spin_unlock(&dcache_lock);
 
@@ -609,7 +634,7 @@ static void shrink_dcache_for_umount_subtree(struct dentry *dentry)
 			spin_lock(&dcache_lock);
 			list_for_each_entry(loop, &dentry->d_subdirs,
 					    d_u.d_child) {
-				dentry_lru_remove(loop);
+				dentry_lru_del_init(loop);
 				__d_drop(loop);
 				cond_resched_lock(&dcache_lock);
 			}
@@ -791,14 +816,13 @@ resume:
 		struct dentry *dentry = list_entry(tmp, struct dentry, d_u.d_child);
 		next = tmp->next;
 
-		dentry_lru_remove(dentry);
+		dentry_lru_del_init(dentry);
 		/* 
 		 * move only zero ref count dentries to the end 
 		 * of the unused list for prune_dcache
 		 */
 		if (!atomic_read(&dentry->d_count)) {
-			list_add_tail(&dentry->d_lru, &dentry_unused);
-			dentry_stat.nr_unused++;
+			dentry_lru_add_tail(dentry);
 			found++;
 		}
 
@@ -840,10 +864,11 @@ out:
  
 void shrink_dcache_parent(struct dentry * parent)
 {
+	struct super_block *sb = parent->d_sb;
 	int found;
 
 	while ((found = select_parent(parent)) != 0)
-		prune_dcache(found, parent->d_sb);
+		__shrink_dcache_sb(sb, &found, 0);
 }
 
 /*
@@ -863,7 +888,7 @@ static int shrink_dcache_memory(int nr, gfp_t gfp_mask)
 	if (nr) {
 		if (!(gfp_mask & __GFP_FS))
 			return -1;
-		prune_dcache(nr, NULL);
+		prune_dcache(nr);
 	}
 	return (dentry_stat.nr_unused / 100) * sysctl_vfs_cache_pressure;
 }
@@ -1215,7 +1240,7 @@ struct dentry *d_splice_alias(struct inode *inode, struct dentry *dentry)
  * rcu_read_lock() and rcu_read_unlock() are used to disable preemption while
  * lookup is going on.
  *
- * dentry_unused list is not updated even if lookup finds the required dentry
+ * The dentry unused LRU is not updated even if lookup finds the required dentry
  * in there. It is updated in places such as prune_dcache, shrink_dcache_sb,
  * select_parent and __dget_locked. This laziness saves lookup from dcache_lock
  * acquisition.
diff --git a/fs/super.c b/fs/super.c
index 453877c5697..e931ae9511f 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -70,6 +70,7 @@ static struct super_block *alloc_super(struct file_system_type *type)
 		INIT_LIST_HEAD(&s->s_instances);
 		INIT_HLIST_HEAD(&s->s_anon);
 		INIT_LIST_HEAD(&s->s_inodes);
+		INIT_LIST_HEAD(&s->s_dentry_lru);
 		init_rwsem(&s->s_umount);
 		mutex_init(&s->s_lock);
 		lockdep_set_class(&s->s_umount, &type->s_umount_key);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index ff54ae4933f..e5e6a244096 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1025,6 +1025,7 @@ extern int send_sigurg(struct fown_struct *fown);
 extern struct list_head super_blocks;
 extern spinlock_t sb_lock;
 
+#define sb_entry(list)  list_entry((list), struct super_block, s_list)
 #define S_BIAS (1<<30)
 struct super_block {
 	struct list_head	s_list;		/* Keep this first */
@@ -1058,6 +1059,9 @@ struct super_block {
 	struct list_head	s_more_io;	/* parked for more writeback */
 	struct hlist_head	s_anon;		/* anonymous dentries for (nfs) exporting */
 	struct list_head	s_files;
+	/* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */
+	struct list_head	s_dentry_lru;	/* unused dentry lru */
+	int			s_nr_dentry_unused;	/* # of dentry on lru */
 
 	struct block_device	*s_bdev;
 	struct mtd_info		*s_mtd;
-- 
cgit v1.2.3


From 0cad47cf13bc2e9142d3a11d9f50523797d0d4ea Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:27:16 -0700
Subject: page-flags: record page flag overlays explicitly

With the recent page flag reorganisation we have a single enum which
defines the valid page flags and their values, nice and clear.  However
there are a number of bits which are overloaded by different subsystems.
Firstly there is PG_owner_priv_1 which is used by filesystems and by XEN.
Secondly both SLOB and SLUB use a couple of extra page bits to manage
internal state for pages they own; both overlay other bits.  All of these
"aliases" are scattered about the source making it very hard for a reader
to know if the bits are safe to rely on in all contexts; confusion here is
bad.

As we now have a single place where the bits are clearly assigned it makes
sense to clarify the reuse of bits by making the aliases explicit and
visible with the original bit assignments.  This patch creates explicit
aliases within the enum itself for the overloaded bits, creates standard
bit accessors PageFoo etc.  and uses those throughout.

This version pulls the bit manipulation out to standard named page bit
accessors as suggested by Christoph, it retains the explicit mapping to
the overlayed bits.  A fusion of both ideas.  This has been SLUB and SLOB
have been compile tested on x86_64 only, and SLUB boot tested.  If people
feel this is worth doing then I can run a fuller set of testing.

This patch:

Some page flags are used for more than one purpose, for example
PG_owner_priv_1.  Currently there are individual accessors for each user,
each built using the common flag name far away from the bit definitions.
This makes it hard to see all possible uses of these bits.

Now that we have a single enum to generate the bit orders it makes sense
to express overlays in the same place.  So create per use aliases for this
bit in the main page-flags enum and use those in the accessors.

[akpm@linux-foundation.org: fix xen]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/page-flags.h | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 0d2a4e7012a..7d8db1233e4 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -96,7 +96,14 @@ enum pageflags {
 #ifdef CONFIG_IA64_UNCACHED_ALLOCATOR
 	PG_uncached,		/* Page has been mapped as uncached */
 #endif
-	__NR_PAGEFLAGS
+	__NR_PAGEFLAGS,
+
+	/* Filesystems */
+	PG_checked = PG_owner_priv_1,
+
+	/* XEN */
+	PG_pinned = PG_owner_priv_1,
+	PG_savepinned = PG_dirty,
 };
 
 #ifndef __GENERATING_BOUNDS_H
@@ -155,9 +162,9 @@ PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty)
 PAGEFLAG(LRU, lru) __CLEARPAGEFLAG(LRU, lru)
 PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active)
 __PAGEFLAG(Slab, slab)
-PAGEFLAG(Checked, owner_priv_1)		/* Used by some filesystems */
-PAGEFLAG(Pinned, owner_priv_1) TESTSCFLAG(Pinned, owner_priv_1) /* Xen */
-PAGEFLAG(SavePinned, dirty);					/* Xen */
+PAGEFLAG(Checked, checked)		/* Used by some filesystems */
+PAGEFLAG(Pinned, pinned) TESTSCFLAG(Pinned, pinned)	/* Xen */
+PAGEFLAG(SavePinned, savepinned);			/* Xen */
 PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved)
 PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private)
 	__SETPAGEFLAG(Private, private)
-- 
cgit v1.2.3


From 8a38082d21cbc5ec961da7dda195e98a9a064dcf Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:27:18 -0700
Subject: slub: record page flag overlays explicitly

SLUB reuses two page bits for internal purposes, it overlays PG_active and
PG_error.  This is hidden away in slub.c.  Document these overlays
explicitly in the main page-flags enum along with all the others.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/page-flags.h |  7 +++++
 mm/slub.c                  | 65 ++++++++++++----------------------------------
 2 files changed, 24 insertions(+), 48 deletions(-)

diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 7d8db1233e4..3fc586b7b90 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -104,6 +104,10 @@ enum pageflags {
 	/* XEN */
 	PG_pinned = PG_owner_priv_1,
 	PG_savepinned = PG_dirty,
+
+	/* SLUB */
+	PG_slub_frozen = PG_active,
+	PG_slub_debug = PG_error,
 };
 
 #ifndef __GENERATING_BOUNDS_H
@@ -169,6 +173,9 @@ PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved)
 PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private)
 	__SETPAGEFLAG(Private, private)
 
+__PAGEFLAG(SlubFrozen, slub_frozen)
+__PAGEFLAG(SlubDebug, slub_debug)
+
 /*
  * Only test-and-set exist for PG_writeback.  The unconditional operators are
  * risky: they bypass page accounting.
diff --git a/mm/slub.c b/mm/slub.c
index 6d4a49c1ff2..77c21cf53ff 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -102,44 +102,12 @@
  * 			the fast path and disables lockless freelists.
  */
 
-#define FROZEN (1 << PG_active)
-
 #ifdef CONFIG_SLUB_DEBUG
-#define SLABDEBUG (1 << PG_error)
+#define SLABDEBUG 1
 #else
 #define SLABDEBUG 0
 #endif
 
-static inline int SlabFrozen(struct page *page)
-{
-	return page->flags & FROZEN;
-}
-
-static inline void SetSlabFrozen(struct page *page)
-{
-	page->flags |= FROZEN;
-}
-
-static inline void ClearSlabFrozen(struct page *page)
-{
-	page->flags &= ~FROZEN;
-}
-
-static inline int SlabDebug(struct page *page)
-{
-	return page->flags & SLABDEBUG;
-}
-
-static inline void SetSlabDebug(struct page *page)
-{
-	page->flags |= SLABDEBUG;
-}
-
-static inline void ClearSlabDebug(struct page *page)
-{
-	page->flags &= ~SLABDEBUG;
-}
-
 /*
  * Issues still to be resolved:
  *
@@ -971,7 +939,7 @@ static int free_debug_processing(struct kmem_cache *s, struct page *page,
 	}
 
 	/* Special debug activities for freeing objects */
-	if (!SlabFrozen(page) && !page->freelist)
+	if (!PageSlubFrozen(page) && !page->freelist)
 		remove_full(s, page);
 	if (s->flags & SLAB_STORE_USER)
 		set_track(s, object, TRACK_FREE, addr);
@@ -1157,7 +1125,7 @@ static struct page *new_slab(struct kmem_cache *s, gfp_t flags, int node)
 	page->flags |= 1 << PG_slab;
 	if (s->flags & (SLAB_DEBUG_FREE | SLAB_RED_ZONE | SLAB_POISON |
 			SLAB_STORE_USER | SLAB_TRACE))
-		SetSlabDebug(page);
+		__SetPageSlubDebug(page);
 
 	start = page_address(page);
 
@@ -1184,14 +1152,14 @@ static void __free_slab(struct kmem_cache *s, struct page *page)
 	int order = compound_order(page);
 	int pages = 1 << order;
 
-	if (unlikely(SlabDebug(page))) {
+	if (unlikely(SLABDEBUG && PageSlubDebug(page))) {
 		void *p;
 
 		slab_pad_check(s, page);
 		for_each_object(p, s, page_address(page),
 						page->objects)
 			check_object(s, page, p, 0);
-		ClearSlabDebug(page);
+		__ClearPageSlubDebug(page);
 	}
 
 	mod_zone_page_state(page_zone(page),
@@ -1288,7 +1256,7 @@ static inline int lock_and_freeze_slab(struct kmem_cache_node *n,
 	if (slab_trylock(page)) {
 		list_del(&page->lru);
 		n->nr_partial--;
-		SetSlabFrozen(page);
+		__SetPageSlubFrozen(page);
 		return 1;
 	}
 	return 0;
@@ -1398,7 +1366,7 @@ static void unfreeze_slab(struct kmem_cache *s, struct page *page, int tail)
 	struct kmem_cache_node *n = get_node(s, page_to_nid(page));
 	struct kmem_cache_cpu *c = get_cpu_slab(s, smp_processor_id());
 
-	ClearSlabFrozen(page);
+	__ClearPageSlubFrozen(page);
 	if (page->inuse) {
 
 		if (page->freelist) {
@@ -1406,7 +1374,8 @@ static void unfreeze_slab(struct kmem_cache *s, struct page *page, int tail)
 			stat(c, tail ? DEACTIVATE_TO_TAIL : DEACTIVATE_TO_HEAD);
 		} else {
 			stat(c, DEACTIVATE_FULL);
-			if (SlabDebug(page) && (s->flags & SLAB_STORE_USER))
+			if (SLABDEBUG && PageSlubDebug(page) &&
+						(s->flags & SLAB_STORE_USER))
 				add_full(n, page);
 		}
 		slab_unlock(page);
@@ -1551,7 +1520,7 @@ load_freelist:
 	object = c->page->freelist;
 	if (unlikely(!object))
 		goto another_slab;
-	if (unlikely(SlabDebug(c->page)))
+	if (unlikely(SLABDEBUG && PageSlubDebug(c->page)))
 		goto debug;
 
 	c->freelist = object[c->offset];
@@ -1588,7 +1557,7 @@ new_slab:
 		if (c->page)
 			flush_slab(s, c);
 		slab_lock(new);
-		SetSlabFrozen(new);
+		__SetPageSlubFrozen(new);
 		c->page = new;
 		goto load_freelist;
 	}
@@ -1674,7 +1643,7 @@ static void __slab_free(struct kmem_cache *s, struct page *page,
 	stat(c, FREE_SLOWPATH);
 	slab_lock(page);
 
-	if (unlikely(SlabDebug(page)))
+	if (unlikely(SLABDEBUG && PageSlubDebug(page)))
 		goto debug;
 
 checks_ok:
@@ -1682,7 +1651,7 @@ checks_ok:
 	page->freelist = object;
 	page->inuse--;
 
-	if (unlikely(SlabFrozen(page))) {
+	if (unlikely(PageSlubFrozen(page))) {
 		stat(c, FREE_FROZEN);
 		goto out_unlock;
 	}
@@ -3317,12 +3286,12 @@ static void validate_slab_slab(struct kmem_cache *s, struct page *page,
 			s->name, page);
 
 	if (s->flags & DEBUG_DEFAULT_FLAGS) {
-		if (!SlabDebug(page))
-			printk(KERN_ERR "SLUB %s: SlabDebug not set "
+		if (!PageSlubDebug(page))
+			printk(KERN_ERR "SLUB %s: SlubDebug not set "
 				"on slab 0x%p\n", s->name, page);
 	} else {
-		if (SlabDebug(page))
-			printk(KERN_ERR "SLUB %s: SlabDebug set on "
+		if (PageSlubDebug(page))
+			printk(KERN_ERR "SLUB %s: SlubDebug set on "
 				"slab 0x%p\n", s->name, page);
 	}
 }
-- 
cgit v1.2.3


From 9023cb7e8564d95a1893f8cb6895a293be9a71fe Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:27:19 -0700
Subject: slob: record page flag overlays explicitly

SLOB reuses two page bits for internal purposes, it overlays PG_active and
PG_private.  This is hidden away in slob.c.  Document these overlays
explicitly in the main page-flags enum along with all the others.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/page-flags.h |  7 +++++++
 mm/slob.c                  | 12 ++++++------
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 3fc586b7b90..54590a9a103 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -105,6 +105,10 @@ enum pageflags {
 	PG_pinned = PG_owner_priv_1,
 	PG_savepinned = PG_dirty,
 
+	/* SLOB */
+	PG_slob_page = PG_active,
+	PG_slob_free = PG_private,
+
 	/* SLUB */
 	PG_slub_frozen = PG_active,
 	PG_slub_debug = PG_error,
@@ -173,6 +177,9 @@ PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved)
 PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private)
 	__SETPAGEFLAG(Private, private)
 
+__PAGEFLAG(SlobPage, slob_page)
+__PAGEFLAG(SlobFree, slob_free)
+
 __PAGEFLAG(SlubFrozen, slub_frozen)
 __PAGEFLAG(SlubDebug, slub_debug)
 
diff --git a/mm/slob.c b/mm/slob.c
index a3ad6671adf..de268eb7ac7 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -130,17 +130,17 @@ static LIST_HEAD(free_slob_large);
  */
 static inline int slob_page(struct slob_page *sp)
 {
-	return test_bit(PG_active, &sp->flags);
+	return PageSlobPage((struct page *)sp);
 }
 
 static inline void set_slob_page(struct slob_page *sp)
 {
-	__set_bit(PG_active, &sp->flags);
+	__SetPageSlobPage((struct page *)sp);
 }
 
 static inline void clear_slob_page(struct slob_page *sp)
 {
-	__clear_bit(PG_active, &sp->flags);
+	__ClearPageSlobPage((struct page *)sp);
 }
 
 /*
@@ -148,19 +148,19 @@ static inline void clear_slob_page(struct slob_page *sp)
  */
 static inline int slob_page_free(struct slob_page *sp)
 {
-	return test_bit(PG_private, &sp->flags);
+	return PageSlobFree((struct page *)sp);
 }
 
 static void set_slob_page_free(struct slob_page *sp, struct list_head *list)
 {
 	list_add(&sp->list, list);
-	__set_bit(PG_private, &sp->flags);
+	__SetPageSlobFree((struct page *)sp);
 }
 
 static inline void clear_slob_page_free(struct slob_page *sp)
 {
 	list_del(&sp->list);
-	__clear_bit(PG_private, &sp->flags);
+	__ClearPageSlobFree((struct page *)sp);
 }
 
 #define SLOB_UNIT sizeof(slob_t)
-- 
cgit v1.2.3


From 2185e69f680ae8c8496b6fc15e20c889d5b39b67 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 23 Jul 2008 21:27:19 -0700
Subject: mapping_set_error: add unlikely()

This is called on a per-page basis and in the vast majority of cases
`error' is zero.

Cc: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/pagemap.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index d2fca802f80..ee1ec2c7723 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -22,7 +22,7 @@
 
 static inline void mapping_set_error(struct address_space *mapping, int error)
 {
-	if (error) {
+	if (unlikely(error)) {
 		if (error == -ENOSPC)
 			set_bit(AS_ENOSPC, &mapping->flags);
 		else
-- 
cgit v1.2.3


From 9109fb7b3520de187ebc3646c209d66a233f7169 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:27:20 -0700
Subject: mm: drop unneeded pgdat argument from free_area_init_node()

free_area_init_node() gets passed in the node id as well as the node
descriptor.  This is redundant as the function can trivially get the node
descriptor itself by means of NODE_DATA() and the node's id.

I checked all the users and NODE_DATA() seems to be usable everywhere
from where this function is called.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/mm/numa.c         |  2 +-
 arch/arm/mm/init.c           |  2 +-
 arch/avr32/mm/init.c         |  2 +-
 arch/cris/arch-v10/mm/init.c |  2 +-
 arch/cris/arch-v32/mm/init.c |  2 +-
 arch/m32r/mm/discontig.c     |  3 +--
 arch/m32r/mm/init.c          |  2 +-
 arch/m68k/mm/motorola.c      |  2 +-
 arch/m68k/mm/sun3mmu.c       |  2 +-
 arch/parisc/mm/init.c        |  2 +-
 arch/sparc/mm/srmmu.c        |  3 +--
 arch/sparc/mm/sun4c.c        |  3 +--
 arch/v850/kernel/setup.c     |  3 +--
 include/linux/mm.h           |  5 ++---
 mm/memory_hotplug.c          |  2 +-
 mm/page_alloc.c              | 11 ++++++-----
 16 files changed, 22 insertions(+), 26 deletions(-)

diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index a53fda0481c..def0c74a78a 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -313,7 +313,7 @@ void __init paging_init(void)
 			zones_size[ZONE_DMA] = dma_local_pfn;
 			zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn;
 		}
-		free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, NULL);
+		free_area_init_node(nid, zones_size, start_pfn, NULL);
 	}
 
 	/* Initialize the kernel's ZERO_PGE. */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index b657f1719af..e6352946dde 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -284,7 +284,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	 */
 	arch_adjust_zones(node, zone_size, zhole_size);
 
-	free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+	free_area_init_node(node, zone_size, start_pfn, zhole_size);
 
 	return end_pfn;
 }
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 3f90a87527b..786de88a82a 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -129,7 +129,7 @@ void __init paging_init(void)
 		printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
 		       nid, start_pfn, low);
 
-		free_area_init_node(nid, pgdat, zones_size, start_pfn, NULL);
+		free_area_init_node(nid, zones_size, start_pfn, NULL);
 
 		printk("Node %u: mem_map starts at %p\n",
 		       pgdat->node_id, pgdat->node_mem_map);
diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c
index e0fcd1a9bfd..742fd1974c2 100644
--- a/arch/cris/arch-v10/mm/init.c
+++ b/arch/cris/arch-v10/mm/init.c
@@ -182,7 +182,7 @@ paging_init(void)
 	 * mem_map page array.
 	 */
 
-	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 }
 
 /* Initialize remaps of some I/O-ports. It is important that this
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index 5a9ac583464..8a34b8b7429 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -162,7 +162,7 @@ paging_init(void)
 	 * substantially higher than 0, like us (we start at PAGE_OFFSET). This
 	 * saves space in the mem_map page array.
 	 */
-	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 
 	mem_map = contig_page_data.node_mem_map;
 }
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index aa9145ef6cc..cc23934bc41 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -147,8 +147,7 @@ unsigned long __init zone_sizes_init(void)
 		zholes_size[ZONE_DMA] = mp->holes;
 		holes += zholes_size[ZONE_DMA];
 
-		free_area_init_node(nid, NODE_DATA(nid), zones_size,
-			start_pfn, zholes_size);
+		free_area_init_node(nid, zones_size, start_pfn, zholes_size);
 	}
 
 	/*
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index bbd97c85bc5..28799af15e9 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -123,7 +123,7 @@ unsigned long __init zone_sizes_init(void)
 	start_pfn = __MEMORY_START >> PAGE_SHIFT;
 #endif /* CONFIG_MMU */
 
-	free_area_init_node(0, NODE_DATA(0), zones_size, start_pfn, 0);
+	free_area_init_node(0, zones_size, start_pfn, 0);
 
 	return 0;
 }
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 226795bdf35..c5dbb9bdb32 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -296,7 +296,7 @@ void __init paging_init(void)
 #endif
 	for (i = 0; i < m68k_num_memory; i++) {
 		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
-		free_area_init_node(i, pg_data_map + i, zones_size,
+		free_area_init_node(i, zones_size,
 				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
 	}
 }
diff --git a/arch/m68k/mm/sun3mmu.c b/arch/m68k/mm/sun3mmu.c
index edceefc1887..1b902dbd437 100644
--- a/arch/m68k/mm/sun3mmu.c
+++ b/arch/m68k/mm/sun3mmu.c
@@ -94,7 +94,7 @@ void __init paging_init(void)
 
 	/* I really wish I knew why the following change made things better...  -- Sam */
 /*	free_area_init(zones_size); */
-	free_area_init_node(0, NODE_DATA(0), zones_size,
+	free_area_init_node(0, zones_size,
 			    (__pa(PAGE_OFFSET) >> PAGE_SHIFT) + 1, NULL);
 
 
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 0ddf4904640..7c155c254e7 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -887,7 +887,7 @@ void __init paging_init(void)
 		}
 #endif
 
-		free_area_init_node(i, NODE_DATA(i), zones_size,
+		free_area_init_node(i, zones_size,
 				pmem_ranges[i].start_pfn, NULL);
 	}
 }
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index c624e04ff03..ee30462598f 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -1352,8 +1352,7 @@ void __init srmmu_paging_init(void)
 		zones_size[ZONE_HIGHMEM] = npages;
 		zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-		free_area_init_node(0, &contig_page_data, zones_size,
-				    pfn_base, zholes_size);
+		free_area_init_node(0, zones_size, pfn_base, zholes_size);
 	}
 }
 
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index 2375fe9dc31..d1782f6368b 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2123,8 +2123,7 @@ void __init sun4c_paging_init(void)
 		zones_size[ZONE_HIGHMEM] = npages;
 		zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-		free_area_init_node(0, &contig_page_data, zones_size,
-				    pfn_base, zholes_size);
+		free_area_init_node(0, zones_size, pfn_base, zholes_size);
 	}
 
 	cnt = 0;
diff --git a/arch/v850/kernel/setup.c b/arch/v850/kernel/setup.c
index a0a8456a843..10335cecf7b 100644
--- a/arch/v850/kernel/setup.c
+++ b/arch/v850/kernel/setup.c
@@ -295,8 +295,7 @@ init_mem_alloc (unsigned long ram_start, unsigned long ram_len)
 #error MAX_ORDER is too large for given PAGE_OFFSET (use CONFIG_FORCE_MAX_ZONEORDER to change it)
 #endif
 	NODE_DATA(0)->node_mem_map = NULL;
-	free_area_init_node (0, NODE_DATA(0), zones_size,
-			     ADDR_TO_PAGE (PAGE_OFFSET), 0);
+	free_area_init_node(0, zones_size, ADDR_TO_PAGE (PAGE_OFFSET), 0);
 }
 
 
diff --git a/include/linux/mm.h b/include/linux/mm.h
index f8071097302..196924b657b 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -962,9 +962,8 @@ static inline void pgtable_page_dtor(struct page *page)
 		NULL: pte_offset_kernel(pmd, address))
 
 extern void free_area_init(unsigned long * zones_size);
-extern void free_area_init_node(int nid, pg_data_t *pgdat,
-	unsigned long * zones_size, unsigned long zone_start_pfn, 
-	unsigned long *zholes_size);
+extern void free_area_init_node(int nid, unsigned long * zones_size,
+		unsigned long zone_start_pfn, unsigned long *zholes_size);
 #ifdef CONFIG_ARCH_POPULATES_NODE_MAP
 /*
  * With CONFIG_ARCH_POPULATES_NODE_MAP set, an architecture may initialise its
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 833f854eabe..6e26adc08f1 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -455,7 +455,7 @@ static pg_data_t *hotadd_new_pgdat(int nid, u64 start)
 	/* we can use NODE_DATA(nid) from here */
 
 	/* init node's zones as empty zones, we don't have any present pages.*/
-	free_area_init_node(nid, pgdat, zones_size, start_pfn, zholes_size);
+	free_area_init_node(nid, zones_size, start_pfn, zholes_size);
 
 	return pgdat;
 }
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 24aa3d1b9d9..e43aae135b3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3461,10 +3461,11 @@ static void __init_refok alloc_node_mem_map(struct pglist_data *pgdat)
 #endif /* CONFIG_FLAT_NODE_MEM_MAP */
 }
 
-void __paginginit free_area_init_node(int nid, struct pglist_data *pgdat,
-		unsigned long *zones_size, unsigned long node_start_pfn,
-		unsigned long *zholes_size)
+void __paginginit free_area_init_node(int nid, unsigned long *zones_size,
+		unsigned long node_start_pfn, unsigned long *zholes_size)
 {
+	pg_data_t *pgdat = NODE_DATA(nid);
+
 	pgdat->node_id = nid;
 	pgdat->node_start_pfn = node_start_pfn;
 	calculate_node_totalpages(pgdat, zones_size, zholes_size);
@@ -3961,7 +3962,7 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 	setup_nr_node_ids();
 	for_each_online_node(nid) {
 		pg_data_t *pgdat = NODE_DATA(nid);
-		free_area_init_node(nid, pgdat, NULL,
+		free_area_init_node(nid, NULL,
 				find_min_pfn_for_node(nid), NULL);
 
 		/* Any memory on that node */
@@ -4032,7 +4033,7 @@ EXPORT_SYMBOL(contig_page_data);
 
 void __init free_area_init(unsigned long *zones_size)
 {
-	free_area_init_node(0, NODE_DATA(0), zones_size,
+	free_area_init_node(0, zones_size,
 			__pa(PAGE_OFFSET) >> PAGE_SHIFT, NULL);
 }
 
-- 
cgit v1.2.3


From fc1b8a73dd71226902a11928dd5500326e101df9 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 23 Jul 2008 21:27:22 -0700
Subject: hugetlb: move hugetlb_acct_memory()

This is a patchset to give reliable behaviour to a process that
successfully calls mmap(MAP_PRIVATE) on a hugetlbfs file.  Currently, it
is possible for the process to be killed due to a small hugepage pool size
even if it calls mlock().

MAP_SHARED mappings on hugetlbfs reserve huge pages at mmap() time.  This
guarantees all future faults against the mapping will succeed.  This
allows local allocations at first use improving NUMA locality whilst
retaining reliability.

MAP_PRIVATE mappings do not reserve pages.  This can result in an
application being SIGKILLed later if a huge page is not available at fault
time.  This makes huge pages usage very ill-advised in some cases as the
unexpected application failure cannot be detected and handled as it is
immediately fatal.  Although an application may force instantiation of the
pages using mlock(), this may lead to poor memory placement and the
process may still be killed when performing COW.

This patchset introduces a reliability guarantee for the process which
creates a private mapping, i.e.  the process that calls mmap() on a
hugetlbfs file successfully.  The first patch of the set is purely
mechanical code move to make later diffs easier to read.  The second patch
will guarantee faults up until the process calls fork().  After patch two,
as long as the child keeps the mappings, the parent is no longer
guaranteed to be reliable.  Patch 3 guarantees that the parent will always
successfully COW by unmapping the pages from the child in the event there
are insufficient pages in the hugepage pool in allocate a new page, be it
via a static or dynamic pool.

Existing hugepage-aware applications are unlikely to be affected by this
change.  For much of hugetlbfs's history, pages were pre-faulted at mmap()
time or mmap() failed which acts in a reserve-like manner.  If the pool is
sized correctly already so that parent and child can fault reliably, the
application will not even notice the reserves.  It's only when the pool is
too small for the application to function perfectly reliably that the
reserves come into play.

Credit goes to Andy Whitcroft for cleaning up a number of mistakes during
review before the patches were released.

This patch:

A later patch in this set needs to call hugetlb_acct_memory() before it is
defined.  This patch moves the function without modification.  This makes
later diffs easier to read.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 82 ++++++++++++++++++++++++++++++------------------------------
 1 file changed, 41 insertions(+), 41 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 2c5c9ee4220..a4dbba8965f 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -716,6 +716,47 @@ unsigned long hugetlb_total_pages(void)
 	return nr_huge_pages * (HPAGE_SIZE / PAGE_SIZE);
 }
 
+static int hugetlb_acct_memory(long delta)
+{
+	int ret = -ENOMEM;
+
+	spin_lock(&hugetlb_lock);
+	/*
+	 * When cpuset is configured, it breaks the strict hugetlb page
+	 * reservation as the accounting is done on a global variable. Such
+	 * reservation is completely rubbish in the presence of cpuset because
+	 * the reservation is not checked against page availability for the
+	 * current cpuset. Application can still potentially OOM'ed by kernel
+	 * with lack of free htlb page in cpuset that the task is in.
+	 * Attempt to enforce strict accounting with cpuset is almost
+	 * impossible (or too ugly) because cpuset is too fluid that
+	 * task or memory node can be dynamically moved between cpusets.
+	 *
+	 * The change of semantics for shared hugetlb mapping with cpuset is
+	 * undesirable. However, in order to preserve some of the semantics,
+	 * we fall back to check against current free page availability as
+	 * a best attempt and hopefully to minimize the impact of changing
+	 * semantics that cpuset has.
+	 */
+	if (delta > 0) {
+		if (gather_surplus_pages(delta) < 0)
+			goto out;
+
+		if (delta > cpuset_mems_nr(free_huge_pages_node)) {
+			return_unused_surplus_pages(delta);
+			goto out;
+		}
+	}
+
+	ret = 0;
+	if (delta < 0)
+		return_unused_surplus_pages((unsigned long) -delta);
+
+out:
+	spin_unlock(&hugetlb_lock);
+	return ret;
+}
+
 /*
  * We cannot handle pagefaults against hugetlb pages at all.  They cause
  * handle_mm_fault() to try to instantiate regular-sized pages in the
@@ -1248,47 +1289,6 @@ static long region_truncate(struct list_head *head, long end)
 	return chg;
 }
 
-static int hugetlb_acct_memory(long delta)
-{
-	int ret = -ENOMEM;
-
-	spin_lock(&hugetlb_lock);
-	/*
-	 * When cpuset is configured, it breaks the strict hugetlb page
-	 * reservation as the accounting is done on a global variable. Such
-	 * reservation is completely rubbish in the presence of cpuset because
-	 * the reservation is not checked against page availability for the
-	 * current cpuset. Application can still potentially OOM'ed by kernel
-	 * with lack of free htlb page in cpuset that the task is in.
-	 * Attempt to enforce strict accounting with cpuset is almost
-	 * impossible (or too ugly) because cpuset is too fluid that
-	 * task or memory node can be dynamically moved between cpusets.
-	 *
-	 * The change of semantics for shared hugetlb mapping with cpuset is
-	 * undesirable. However, in order to preserve some of the semantics,
-	 * we fall back to check against current free page availability as
-	 * a best attempt and hopefully to minimize the impact of changing
-	 * semantics that cpuset has.
-	 */
-	if (delta > 0) {
-		if (gather_surplus_pages(delta) < 0)
-			goto out;
-
-		if (delta > cpuset_mems_nr(free_huge_pages_node)) {
-			return_unused_surplus_pages(delta);
-			goto out;
-		}
-	}
-
-	ret = 0;
-	if (delta < 0)
-		return_unused_surplus_pages((unsigned long) -delta);
-
-out:
-	spin_unlock(&hugetlb_lock);
-	return ret;
-}
-
 int hugetlb_reserve_pages(struct inode *inode, long from, long to)
 {
 	long ret, chg;
-- 
cgit v1.2.3


From a1e78772d72b2616ed20e54896e68e0e7044854e Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 23 Jul 2008 21:27:23 -0700
Subject: hugetlb: reserve huge pages for reliable MAP_PRIVATE hugetlbfs
 mappings until fork()

This patch reserves huge pages at mmap() time for MAP_PRIVATE mappings in
a similar manner to the reservations taken for MAP_SHARED mappings.  The
reserve count is accounted both globally and on a per-VMA basis for
private mappings.  This guarantees that a process that successfully calls
mmap() will successfully fault all pages in the future unless fork() is
called.

The characteristics of private mappings of hugetlbfs files behaviour after
this patch are;

1. The process calling mmap() is guaranteed to succeed all future faults until
   it forks().
2. On fork(), the parent may die due to SIGKILL on writes to the private
   mapping if enough pages are not available for the COW. For reasonably
   reliable behaviour in the face of a small huge page pool, children of
   hugepage-aware processes should not reference the mappings; such as
   might occur when fork()ing to exec().
3. On fork(), the child VMAs inherit no reserves. Reads on pages already
   faulted by the parent will succeed. Successful writes will depend on enough
   huge pages being free in the pool.
4. Quotas of the hugetlbfs mount are checked at reserve time for the mapper
   and at fault time otherwise.

Before this patch, all reads or writes in the child potentially needs page
allocations that can later lead to the death of the parent.  This applies
to reads and writes of uninstantiated pages as well as COW.  After the
patch it is only a write to an instantiated page that causes problems.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hugetlbfs/inode.c    |   8 +--
 include/linux/hugetlb.h |   9 ++-
 kernel/fork.c           |   9 +++
 mm/hugetlb.c            | 158 ++++++++++++++++++++++++++++++++++++------------
 4 files changed, 140 insertions(+), 44 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index aeabf80f81a..1576bbecd08 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -103,9 +103,9 @@ static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
 	ret = -ENOMEM;
 	len = vma_len + ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
 
-	if (vma->vm_flags & VM_MAYSHARE &&
-	    hugetlb_reserve_pages(inode, vma->vm_pgoff >> (HPAGE_SHIFT-PAGE_SHIFT),
-				  len >> HPAGE_SHIFT))
+	if (hugetlb_reserve_pages(inode,
+				vma->vm_pgoff >> (HPAGE_SHIFT-PAGE_SHIFT),
+				len >> HPAGE_SHIFT, vma))
 		goto out;
 
 	ret = 0;
@@ -942,7 +942,7 @@ struct file *hugetlb_file_setup(const char *name, size_t size)
 		goto out_dentry;
 
 	error = -ENOMEM;
-	if (hugetlb_reserve_pages(inode, 0, size >> HPAGE_SHIFT))
+	if (hugetlb_reserve_pages(inode, 0, size >> HPAGE_SHIFT, NULL))
 		goto out_inode;
 
 	d_instantiate(dentry, inode);
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index a79e80b689d..185b14c9f02 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -17,6 +17,7 @@ static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
 	return vma->vm_flags & VM_HUGETLB;
 }
 
+void reset_vma_resv_huge_pages(struct vm_area_struct *vma);
 int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
 int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
 int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
@@ -30,7 +31,8 @@ int hugetlb_report_node_meminfo(int, char *);
 unsigned long hugetlb_total_pages(void);
 int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 			unsigned long address, int write_access);
-int hugetlb_reserve_pages(struct inode *inode, long from, long to);
+int hugetlb_reserve_pages(struct inode *inode, long from, long to,
+						struct vm_area_struct *vma);
 void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed);
 
 extern unsigned long max_huge_pages;
@@ -58,6 +60,11 @@ static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
 {
 	return 0;
 }
+
+static inline void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
+{
+}
+
 static inline unsigned long hugetlb_total_pages(void)
 {
 	return 0;
diff --git a/kernel/fork.c b/kernel/fork.c
index adefc1131f2..552c8d8e77a 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -33,6 +33,7 @@
 #include <linux/cpu.h>
 #include <linux/cgroup.h>
 #include <linux/security.h>
+#include <linux/hugetlb.h>
 #include <linux/swap.h>
 #include <linux/syscalls.h>
 #include <linux/jiffies.h>
@@ -306,6 +307,14 @@ static int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm)
 			spin_unlock(&file->f_mapping->i_mmap_lock);
 		}
 
+		/*
+		 * Clear hugetlb-related page reserves for children. This only
+		 * affects MAP_PRIVATE mappings. Faults generated by the child
+		 * are not guaranteed to succeed, even if read-only
+		 */
+		if (is_vm_hugetlb_page(tmp))
+			reset_vma_resv_huge_pages(tmp);
+
 		/*
 		 * Link in the new vma and copy the page table entries.
 		 */
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index a4dbba8965f..0af500db363 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -40,6 +40,69 @@ static int hugetlb_next_nid;
  */
 static DEFINE_SPINLOCK(hugetlb_lock);
 
+/*
+ * These helpers are used to track how many pages are reserved for
+ * faults in a MAP_PRIVATE mapping. Only the process that called mmap()
+ * is guaranteed to have their future faults succeed.
+ *
+ * With the exception of reset_vma_resv_huge_pages() which is called at fork(),
+ * the reserve counters are updated with the hugetlb_lock held. It is safe
+ * to reset the VMA at fork() time as it is not in use yet and there is no
+ * chance of the global counters getting corrupted as a result of the values.
+ */
+static unsigned long vma_resv_huge_pages(struct vm_area_struct *vma)
+{
+	VM_BUG_ON(!is_vm_hugetlb_page(vma));
+	if (!(vma->vm_flags & VM_SHARED))
+		return (unsigned long)vma->vm_private_data;
+	return 0;
+}
+
+static void set_vma_resv_huge_pages(struct vm_area_struct *vma,
+							unsigned long reserve)
+{
+	VM_BUG_ON(!is_vm_hugetlb_page(vma));
+	VM_BUG_ON(vma->vm_flags & VM_SHARED);
+
+	vma->vm_private_data = (void *)reserve;
+}
+
+/* Decrement the reserved pages in the hugepage pool by one */
+static void decrement_hugepage_resv_vma(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_SHARED) {
+		/* Shared mappings always use reserves */
+		resv_huge_pages--;
+	} else {
+		/*
+		 * Only the process that called mmap() has reserves for
+		 * private mappings.
+		 */
+		if (vma_resv_huge_pages(vma)) {
+			resv_huge_pages--;
+			reserve = (unsigned long)vma->vm_private_data - 1;
+			vma->vm_private_data = (void *)reserve;
+		}
+	}
+}
+
+void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
+{
+	VM_BUG_ON(!is_vm_hugetlb_page(vma));
+	if (!(vma->vm_flags & VM_SHARED))
+		vma->vm_private_data = (void *)0;
+}
+
+/* Returns true if the VMA has associated reserve pages */
+static int vma_has_private_reserves(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_SHARED)
+		return 0;
+	if (!vma_resv_huge_pages(vma))
+		return 0;
+	return 1;
+}
+
 static void clear_huge_page(struct page *page, unsigned long addr)
 {
 	int i;
@@ -101,6 +164,15 @@ static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
 	struct zone *zone;
 	struct zoneref *z;
 
+	/*
+	 * A child process with MAP_PRIVATE mappings created by their parent
+	 * have no page reserves. This check ensures that reservations are
+	 * not "stolen". The child may still get SIGKILLed
+	 */
+	if (!vma_has_private_reserves(vma) &&
+			free_huge_pages - resv_huge_pages == 0)
+		return NULL;
+
 	for_each_zone_zonelist_nodemask(zone, z, zonelist,
 						MAX_NR_ZONES - 1, nodemask) {
 		nid = zone_to_nid(zone);
@@ -111,8 +183,8 @@ static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
 			list_del(&page->lru);
 			free_huge_pages--;
 			free_huge_pages_node[nid]--;
-			if (vma && vma->vm_flags & VM_MAYSHARE)
-				resv_huge_pages--;
+			decrement_hugepage_resv_vma(vma);
+
 			break;
 		}
 	}
@@ -461,55 +533,40 @@ static void return_unused_surplus_pages(unsigned long unused_resv_pages)
 	}
 }
 
-
-static struct page *alloc_huge_page_shared(struct vm_area_struct *vma,
-						unsigned long addr)
+static struct page *alloc_huge_page(struct vm_area_struct *vma,
+				    unsigned long addr)
 {
 	struct page *page;
+	struct address_space *mapping = vma->vm_file->f_mapping;
+	struct inode *inode = mapping->host;
+	unsigned int chg = 0;
+
+	/*
+	 * Processes that did not create the mapping will have no reserves and
+	 * will not have accounted against quota. Check that the quota can be
+	 * made before satisfying the allocation
+	 */
+	if (!vma_has_private_reserves(vma)) {
+		chg = 1;
+		if (hugetlb_get_quota(inode->i_mapping, chg))
+			return ERR_PTR(-ENOSPC);
+	}
 
 	spin_lock(&hugetlb_lock);
 	page = dequeue_huge_page_vma(vma, addr);
 	spin_unlock(&hugetlb_lock);
-	return page ? page : ERR_PTR(-VM_FAULT_OOM);
-}
 
-static struct page *alloc_huge_page_private(struct vm_area_struct *vma,
-						unsigned long addr)
-{
-	struct page *page = NULL;
-
-	if (hugetlb_get_quota(vma->vm_file->f_mapping, 1))
-		return ERR_PTR(-VM_FAULT_SIGBUS);
-
-	spin_lock(&hugetlb_lock);
-	if (free_huge_pages > resv_huge_pages)
-		page = dequeue_huge_page_vma(vma, addr);
-	spin_unlock(&hugetlb_lock);
 	if (!page) {
 		page = alloc_buddy_huge_page(vma, addr);
 		if (!page) {
-			hugetlb_put_quota(vma->vm_file->f_mapping, 1);
+			hugetlb_put_quota(inode->i_mapping, chg);
 			return ERR_PTR(-VM_FAULT_OOM);
 		}
 	}
-	return page;
-}
 
-static struct page *alloc_huge_page(struct vm_area_struct *vma,
-				    unsigned long addr)
-{
-	struct page *page;
-	struct address_space *mapping = vma->vm_file->f_mapping;
-
-	if (vma->vm_flags & VM_MAYSHARE)
-		page = alloc_huge_page_shared(vma, addr);
-	else
-		page = alloc_huge_page_private(vma, addr);
+	set_page_refcounted(page);
+	set_page_private(page, (unsigned long) mapping);
 
-	if (!IS_ERR(page)) {
-		set_page_refcounted(page);
-		set_page_private(page, (unsigned long) mapping);
-	}
 	return page;
 }
 
@@ -757,6 +814,13 @@ out:
 	return ret;
 }
 
+static void hugetlb_vm_op_close(struct vm_area_struct *vma)
+{
+	unsigned long reserve = vma_resv_huge_pages(vma);
+	if (reserve)
+		hugetlb_acct_memory(-reserve);
+}
+
 /*
  * We cannot handle pagefaults against hugetlb pages at all.  They cause
  * handle_mm_fault() to try to instantiate regular-sized pages in the
@@ -771,6 +835,7 @@ static int hugetlb_vm_op_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 
 struct vm_operations_struct hugetlb_vm_ops = {
 	.fault = hugetlb_vm_op_fault,
+	.close = hugetlb_vm_op_close,
 };
 
 static pte_t make_huge_pte(struct vm_area_struct *vma, struct page *page,
@@ -1289,11 +1354,25 @@ static long region_truncate(struct list_head *head, long end)
 	return chg;
 }
 
-int hugetlb_reserve_pages(struct inode *inode, long from, long to)
+int hugetlb_reserve_pages(struct inode *inode,
+					long from, long to,
+					struct vm_area_struct *vma)
 {
 	long ret, chg;
 
-	chg = region_chg(&inode->i_mapping->private_list, from, to);
+	/*
+	 * Shared mappings base their reservation on the number of pages that
+	 * are already allocated on behalf of the file. Private mappings need
+	 * to reserve the full area even if read-only as mprotect() may be
+	 * called to make the mapping read-write. Assume !vma is a shm mapping
+	 */
+	if (!vma || vma->vm_flags & VM_SHARED)
+		chg = region_chg(&inode->i_mapping->private_list, from, to);
+	else {
+		chg = to - from;
+		set_vma_resv_huge_pages(vma, chg);
+	}
+
 	if (chg < 0)
 		return chg;
 
@@ -1304,7 +1383,8 @@ int hugetlb_reserve_pages(struct inode *inode, long from, long to)
 		hugetlb_put_quota(inode->i_mapping, chg);
 		return ret;
 	}
-	region_add(&inode->i_mapping->private_list, from, to);
+	if (!vma || vma->vm_flags & VM_SHARED)
+		region_add(&inode->i_mapping->private_list, from, to);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 04f2cbe35699d22dbf428373682ead85ca1240f5 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 23 Jul 2008 21:27:25 -0700
Subject: hugetlb: guarantee that COW faults for a process that called
 mmap(MAP_PRIVATE) on hugetlbfs will succeed

After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork().  At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.

We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork().  Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after.  A failure here would be very undesirable.

Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad.  The following situation is allowed to occur today.

1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
   had taken care to ensure the pages existed

This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap().  When the parent performs COW, it
will try to satisfy the allocation without using reserves.  If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure.  If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.

To summarise the new behaviour:

1. If the original mapper performs COW on a private mapping with multiple
   references, it will attempt to allocate a hugepage from the pool or
   the buddy allocator without using the existing reserves. On fail, VMAs
   mapping the same area are traversed and the page being COW'd is unmapped
   where found. It will then steal the original page as the last mapper in
   the normal way.

2. The VMAs the pages were unmapped from are flagged to note that pages
   with data no longer exist. Future no-page faults on those VMAs will
   terminate the process as otherwise it would appear that data was corrupted.
   A warning is printed to the console that this situation occured.

2. If the child performs COW first, it will attempt to satisfy the COW
   from the pool if there are enough pages or via the buddy allocator if
   overcommit is allowed and the buddy allocator can satisfy the request. If
   it fails, the child will be killed.

If the pool is large enough, existing applications will not notice that
the reserves were a factor.  Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().

[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hugetlbfs/inode.c    |   2 +-
 include/linux/hugetlb.h |   8 +-
 mm/hugetlb.c            | 201 +++++++++++++++++++++++++++++++++++++++++++-----
 mm/memory.c             |   2 +-
 4 files changed, 190 insertions(+), 23 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 1576bbecd08..428eff5b73f 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -441,7 +441,7 @@ hugetlb_vmtruncate_list(struct prio_tree_root *root, pgoff_t pgoff)
 			v_offset = 0;
 
 		__unmap_hugepage_range(vma,
-				vma->vm_start + v_offset, vma->vm_end);
+				vma->vm_start + v_offset, vma->vm_end, NULL);
 	}
 }
 
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 185b14c9f02..abbc187193a 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -23,8 +23,10 @@ int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __us
 int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
 int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
 int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int, int);
-void unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
-void __unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
+void unmap_hugepage_range(struct vm_area_struct *,
+			unsigned long, unsigned long, struct page *);
+void __unmap_hugepage_range(struct vm_area_struct *,
+			unsigned long, unsigned long, struct page *);
 int hugetlb_prefault(struct address_space *, struct vm_area_struct *);
 int hugetlb_report_meminfo(char *);
 int hugetlb_report_node_meminfo(int, char *);
@@ -74,7 +76,7 @@ static inline unsigned long hugetlb_total_pages(void)
 #define follow_huge_addr(mm, addr, write)	ERR_PTR(-EINVAL)
 #define copy_hugetlb_page_range(src, dst, vma)	({ BUG(); 0; })
 #define hugetlb_prefault(mapping, vma)		({ BUG(); 0; })
-#define unmap_hugepage_range(vma, start, end)	BUG()
+#define unmap_hugepage_range(vma, start, end, page)	BUG()
 #define hugetlb_report_meminfo(buf)		0
 #define hugetlb_report_node_meminfo(n, buf)	0
 #define follow_huge_pmd(mm, addr, pmd, write)	NULL
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 0af500db363..a2d29b84501 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -40,6 +40,9 @@ static int hugetlb_next_nid;
  */
 static DEFINE_SPINLOCK(hugetlb_lock);
 
+#define HPAGE_RESV_OWNER    (1UL << (BITS_PER_LONG - 1))
+#define HPAGE_RESV_UNMAPPED (1UL << (BITS_PER_LONG - 2))
+#define HPAGE_RESV_MASK (HPAGE_RESV_OWNER | HPAGE_RESV_UNMAPPED)
 /*
  * These helpers are used to track how many pages are reserved for
  * faults in a MAP_PRIVATE mapping. Only the process that called mmap()
@@ -54,17 +57,32 @@ static unsigned long vma_resv_huge_pages(struct vm_area_struct *vma)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
 	if (!(vma->vm_flags & VM_SHARED))
-		return (unsigned long)vma->vm_private_data;
+		return (unsigned long)vma->vm_private_data & ~HPAGE_RESV_MASK;
 	return 0;
 }
 
 static void set_vma_resv_huge_pages(struct vm_area_struct *vma,
 							unsigned long reserve)
 {
+	unsigned long flags;
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
 	VM_BUG_ON(vma->vm_flags & VM_SHARED);
 
-	vma->vm_private_data = (void *)reserve;
+	flags = (unsigned long)vma->vm_private_data & HPAGE_RESV_MASK;
+	vma->vm_private_data = (void *)(reserve | flags);
+}
+
+static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags)
+{
+	unsigned long reserveflags = (unsigned long)vma->vm_private_data;
+	VM_BUG_ON(!is_vm_hugetlb_page(vma));
+	vma->vm_private_data = (void *)(reserveflags | flags);
+}
+
+static int is_vma_resv_set(struct vm_area_struct *vma, unsigned long flag)
+{
+	VM_BUG_ON(!is_vm_hugetlb_page(vma));
+	return ((unsigned long)vma->vm_private_data & flag) != 0;
 }
 
 /* Decrement the reserved pages in the hugepage pool by one */
@@ -78,14 +96,18 @@ static void decrement_hugepage_resv_vma(struct vm_area_struct *vma)
 		 * Only the process that called mmap() has reserves for
 		 * private mappings.
 		 */
-		if (vma_resv_huge_pages(vma)) {
+		if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
+			unsigned long flags, reserve;
 			resv_huge_pages--;
+			flags = (unsigned long)vma->vm_private_data &
+							HPAGE_RESV_MASK;
 			reserve = (unsigned long)vma->vm_private_data - 1;
-			vma->vm_private_data = (void *)reserve;
+			vma->vm_private_data = (void *)(reserve | flags);
 		}
 	}
 }
 
+/* Reset counters to 0 and clear all HPAGE_RESV_* flags */
 void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
@@ -153,7 +175,7 @@ static struct page *dequeue_huge_page(void)
 }
 
 static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
-				unsigned long address)
+				unsigned long address, int avoid_reserve)
 {
 	int nid;
 	struct page *page = NULL;
@@ -173,6 +195,10 @@ static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
 			free_huge_pages - resv_huge_pages == 0)
 		return NULL;
 
+	/* If reserves cannot be used, ensure enough pages are in the pool */
+	if (avoid_reserve && free_huge_pages - resv_huge_pages == 0)
+		return NULL;
+
 	for_each_zone_zonelist_nodemask(zone, z, zonelist,
 						MAX_NR_ZONES - 1, nodemask) {
 		nid = zone_to_nid(zone);
@@ -183,7 +209,9 @@ static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
 			list_del(&page->lru);
 			free_huge_pages--;
 			free_huge_pages_node[nid]--;
-			decrement_hugepage_resv_vma(vma);
+
+			if (!avoid_reserve)
+				decrement_hugepage_resv_vma(vma);
 
 			break;
 		}
@@ -534,7 +562,7 @@ static void return_unused_surplus_pages(unsigned long unused_resv_pages)
 }
 
 static struct page *alloc_huge_page(struct vm_area_struct *vma,
-				    unsigned long addr)
+				    unsigned long addr, int avoid_reserve)
 {
 	struct page *page;
 	struct address_space *mapping = vma->vm_file->f_mapping;
@@ -546,14 +574,15 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
 	 * will not have accounted against quota. Check that the quota can be
 	 * made before satisfying the allocation
 	 */
-	if (!vma_has_private_reserves(vma)) {
+	if (!(vma->vm_flags & VM_SHARED) &&
+			!is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
 		chg = 1;
 		if (hugetlb_get_quota(inode->i_mapping, chg))
 			return ERR_PTR(-ENOSPC);
 	}
 
 	spin_lock(&hugetlb_lock);
-	page = dequeue_huge_page_vma(vma, addr);
+	page = dequeue_huge_page_vma(vma, addr, avoid_reserve);
 	spin_unlock(&hugetlb_lock);
 
 	if (!page) {
@@ -909,7 +938,7 @@ nomem:
 }
 
 void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
-			    unsigned long end)
+			    unsigned long end, struct page *ref_page)
 {
 	struct mm_struct *mm = vma->vm_mm;
 	unsigned long address;
@@ -937,6 +966,27 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 		if (huge_pmd_unshare(mm, &address, ptep))
 			continue;
 
+		/*
+		 * If a reference page is supplied, it is because a specific
+		 * page is being unmapped, not a range. Ensure the page we
+		 * are about to unmap is the actual page of interest.
+		 */
+		if (ref_page) {
+			pte = huge_ptep_get(ptep);
+			if (huge_pte_none(pte))
+				continue;
+			page = pte_page(pte);
+			if (page != ref_page)
+				continue;
+
+			/*
+			 * Mark the VMA as having unmapped its page so that
+			 * future faults in this VMA will fail rather than
+			 * looking like data was lost
+			 */
+			set_vma_resv_flags(vma, HPAGE_RESV_UNMAPPED);
+		}
+
 		pte = huge_ptep_get_and_clear(mm, address, ptep);
 		if (huge_pte_none(pte))
 			continue;
@@ -955,7 +1005,7 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 }
 
 void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
-			  unsigned long end)
+			  unsigned long end, struct page *ref_page)
 {
 	/*
 	 * It is undesirable to test vma->vm_file as it should be non-null
@@ -967,19 +1017,68 @@ void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 	 */
 	if (vma->vm_file) {
 		spin_lock(&vma->vm_file->f_mapping->i_mmap_lock);
-		__unmap_hugepage_range(vma, start, end);
+		__unmap_hugepage_range(vma, start, end, ref_page);
 		spin_unlock(&vma->vm_file->f_mapping->i_mmap_lock);
 	}
 }
 
+/*
+ * This is called when the original mapper is failing to COW a MAP_PRIVATE
+ * mappping it owns the reserve page for. The intention is to unmap the page
+ * from other VMAs and let the children be SIGKILLed if they are faulting the
+ * same region.
+ */
+int unmap_ref_private(struct mm_struct *mm,
+					struct vm_area_struct *vma,
+					struct page *page,
+					unsigned long address)
+{
+	struct vm_area_struct *iter_vma;
+	struct address_space *mapping;
+	struct prio_tree_iter iter;
+	pgoff_t pgoff;
+
+	/*
+	 * vm_pgoff is in PAGE_SIZE units, hence the different calculation
+	 * from page cache lookup which is in HPAGE_SIZE units.
+	 */
+	address = address & huge_page_mask(hstate_vma(vma));
+	pgoff = ((address - vma->vm_start) >> PAGE_SHIFT)
+		+ (vma->vm_pgoff >> PAGE_SHIFT);
+	mapping = (struct address_space *)page_private(page);
+
+	vma_prio_tree_foreach(iter_vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
+		/* Do not unmap the current VMA */
+		if (iter_vma == vma)
+			continue;
+
+		/*
+		 * Unmap the page from other VMAs without their own reserves.
+		 * They get marked to be SIGKILLed if they fault in these
+		 * areas. This is because a future no-page fault on this VMA
+		 * could insert a zeroed page instead of the data existing
+		 * from the time of fork. This would look like data corruption
+		 */
+		if (!is_vma_resv_set(iter_vma, HPAGE_RESV_OWNER))
+			unmap_hugepage_range(iter_vma,
+				address, address + HPAGE_SIZE,
+				page);
+	}
+
+	return 1;
+}
+
 static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
-			unsigned long address, pte_t *ptep, pte_t pte)
+			unsigned long address, pte_t *ptep, pte_t pte,
+			struct page *pagecache_page)
 {
 	struct page *old_page, *new_page;
 	int avoidcopy;
+	int outside_reserve = 0;
 
 	old_page = pte_page(pte);
 
+retry_avoidcopy:
 	/* If no-one else is actually using this page, avoid the copy
 	 * and just make the page writable */
 	avoidcopy = (page_count(old_page) == 1);
@@ -988,11 +1087,43 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
 		return 0;
 	}
 
+	/*
+	 * If the process that created a MAP_PRIVATE mapping is about to
+	 * perform a COW due to a shared page count, attempt to satisfy
+	 * the allocation without using the existing reserves. The pagecache
+	 * page is used to determine if the reserve at this address was
+	 * consumed or not. If reserves were used, a partial faulted mapping
+	 * at the time of fork() could consume its reserves on COW instead
+	 * of the full address range.
+	 */
+	if (!(vma->vm_flags & VM_SHARED) &&
+			is_vma_resv_set(vma, HPAGE_RESV_OWNER) &&
+			old_page != pagecache_page)
+		outside_reserve = 1;
+
 	page_cache_get(old_page);
-	new_page = alloc_huge_page(vma, address);
+	new_page = alloc_huge_page(vma, address, outside_reserve);
 
 	if (IS_ERR(new_page)) {
 		page_cache_release(old_page);
+
+		/*
+		 * If a process owning a MAP_PRIVATE mapping fails to COW,
+		 * it is due to references held by a child and an insufficient
+		 * huge page pool. To guarantee the original mappers
+		 * reliability, unmap the page from child processes. The child
+		 * may get SIGKILLed if it later faults.
+		 */
+		if (outside_reserve) {
+			BUG_ON(huge_pte_none(pte));
+			if (unmap_ref_private(mm, vma, old_page, address)) {
+				BUG_ON(page_count(old_page) != 1);
+				BUG_ON(huge_pte_none(pte));
+				goto retry_avoidcopy;
+			}
+			WARN_ON_ONCE(1);
+		}
+
 		return -PTR_ERR(new_page);
 	}
 
@@ -1015,6 +1146,20 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
 	return 0;
 }
 
+/* Return the pagecache page at a given address within a VMA */
+static struct page *hugetlbfs_pagecache_page(struct vm_area_struct *vma,
+			unsigned long address)
+{
+	struct address_space *mapping;
+	unsigned long idx;
+
+	mapping = vma->vm_file->f_mapping;
+	idx = ((address - vma->vm_start) >> HPAGE_SHIFT)
+		+ (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
+
+	return find_lock_page(mapping, idx);
+}
+
 static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			unsigned long address, pte_t *ptep, int write_access)
 {
@@ -1025,6 +1170,18 @@ static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	struct address_space *mapping;
 	pte_t new_pte;
 
+	/*
+	 * Currently, we are forced to kill the process in the event the
+	 * original mapper has unmapped pages from the child due to a failed
+	 * COW. Warn that such a situation has occured as it may not be obvious
+	 */
+	if (is_vma_resv_set(vma, HPAGE_RESV_UNMAPPED)) {
+		printk(KERN_WARNING
+			"PID %d killed due to inadequate hugepage pool\n",
+			current->pid);
+		return ret;
+	}
+
 	mapping = vma->vm_file->f_mapping;
 	idx = ((address - vma->vm_start) >> HPAGE_SHIFT)
 		+ (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
@@ -1039,7 +1196,7 @@ retry:
 		size = i_size_read(mapping->host) >> HPAGE_SHIFT;
 		if (idx >= size)
 			goto out;
-		page = alloc_huge_page(vma, address);
+		page = alloc_huge_page(vma, address, 0);
 		if (IS_ERR(page)) {
 			ret = -PTR_ERR(page);
 			goto out;
@@ -1081,7 +1238,7 @@ retry:
 
 	if (write_access && !(vma->vm_flags & VM_SHARED)) {
 		/* Optimization, do the COW without a second fault */
-		ret = hugetlb_cow(mm, vma, address, ptep, new_pte);
+		ret = hugetlb_cow(mm, vma, address, ptep, new_pte, page);
 	}
 
 	spin_unlock(&mm->page_table_lock);
@@ -1126,8 +1283,15 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	spin_lock(&mm->page_table_lock);
 	/* Check for a racing update before calling hugetlb_cow */
 	if (likely(pte_same(entry, huge_ptep_get(ptep))))
-		if (write_access && !pte_write(entry))
-			ret = hugetlb_cow(mm, vma, address, ptep, entry);
+		if (write_access && !pte_write(entry)) {
+			struct page *page;
+			page = hugetlbfs_pagecache_page(vma, address);
+			ret = hugetlb_cow(mm, vma, address, ptep, entry, page);
+			if (page) {
+				unlock_page(page);
+				put_page(page);
+			}
+		}
 	spin_unlock(&mm->page_table_lock);
 	mutex_unlock(&hugetlb_instantiation_mutex);
 
@@ -1371,6 +1535,7 @@ int hugetlb_reserve_pages(struct inode *inode,
 	else {
 		chg = to - from;
 		set_vma_resv_huge_pages(vma, chg);
+		set_vma_resv_flags(vma, HPAGE_RESV_OWNER);
 	}
 
 	if (chg < 0)
diff --git a/mm/memory.c b/mm/memory.c
index 82f3f1c5cf1..72932489a08 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -901,7 +901,7 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp,
 			}
 
 			if (unlikely(is_vm_hugetlb_page(vma))) {
-				unmap_hugepage_range(vma, start, end);
+				unmap_hugepage_range(vma, start, end, NULL);
 				zap_work -= (end - start) /
 						(HPAGE_SIZE / PAGE_SIZE);
 				start = end;
-- 
cgit v1.2.3


From e7c4b0bfd025f71cf7624b7c1be174f63caade33 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:27:26 -0700
Subject: huge page private reservation review cleanups

Create some new accessors for vma private data to cut down on and contain
the casts.  Encapsulates the huge and small page offset calculations.
Also adds a couple of VM_BUG_ONs for consistency.

[akpm@linux-foundation.org: Make things static]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 58 +++++++++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 45 insertions(+), 13 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index a2d29b84501..3e873f0101f 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -40,6 +40,28 @@ static int hugetlb_next_nid;
  */
 static DEFINE_SPINLOCK(hugetlb_lock);
 
+/*
+ * Convert the address within this vma to the page offset within
+ * the mapping, in base page units.
+ */
+static pgoff_t vma_page_offset(struct vm_area_struct *vma,
+				unsigned long address)
+{
+	return ((address - vma->vm_start) >> PAGE_SHIFT) +
+					(vma->vm_pgoff >> PAGE_SHIFT);
+}
+
+/*
+ * Convert the address within this vma to the page offset within
+ * the mapping, in pagecache page units; huge pages here.
+ */
+static pgoff_t vma_pagecache_offset(struct vm_area_struct *vma,
+					unsigned long address)
+{
+	return ((address - vma->vm_start) >> HPAGE_SHIFT) +
+			(vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
+}
+
 #define HPAGE_RESV_OWNER    (1UL << (BITS_PER_LONG - 1))
 #define HPAGE_RESV_UNMAPPED (1UL << (BITS_PER_LONG - 2))
 #define HPAGE_RESV_MASK (HPAGE_RESV_OWNER | HPAGE_RESV_UNMAPPED)
@@ -53,36 +75,48 @@ static DEFINE_SPINLOCK(hugetlb_lock);
  * to reset the VMA at fork() time as it is not in use yet and there is no
  * chance of the global counters getting corrupted as a result of the values.
  */
+static unsigned long get_vma_private_data(struct vm_area_struct *vma)
+{
+	return (unsigned long)vma->vm_private_data;
+}
+
+static void set_vma_private_data(struct vm_area_struct *vma,
+							unsigned long value)
+{
+	vma->vm_private_data = (void *)value;
+}
+
 static unsigned long vma_resv_huge_pages(struct vm_area_struct *vma)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
 	if (!(vma->vm_flags & VM_SHARED))
-		return (unsigned long)vma->vm_private_data & ~HPAGE_RESV_MASK;
+		return get_vma_private_data(vma) & ~HPAGE_RESV_MASK;
 	return 0;
 }
 
 static void set_vma_resv_huge_pages(struct vm_area_struct *vma,
 							unsigned long reserve)
 {
-	unsigned long flags;
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
 	VM_BUG_ON(vma->vm_flags & VM_SHARED);
 
-	flags = (unsigned long)vma->vm_private_data & HPAGE_RESV_MASK;
-	vma->vm_private_data = (void *)(reserve | flags);
+	set_vma_private_data(vma,
+		(get_vma_private_data(vma) & HPAGE_RESV_MASK) | reserve);
 }
 
 static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags)
 {
-	unsigned long reserveflags = (unsigned long)vma->vm_private_data;
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
-	vma->vm_private_data = (void *)(reserveflags | flags);
+	VM_BUG_ON(vma->vm_flags & VM_SHARED);
+
+	set_vma_private_data(vma, get_vma_private_data(vma) | flags);
 }
 
 static int is_vma_resv_set(struct vm_area_struct *vma, unsigned long flag)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
-	return ((unsigned long)vma->vm_private_data & flag) != 0;
+
+	return (get_vma_private_data(vma) & flag) != 0;
 }
 
 /* Decrement the reserved pages in the hugepage pool by one */
@@ -1151,11 +1185,10 @@ static struct page *hugetlbfs_pagecache_page(struct vm_area_struct *vma,
 			unsigned long address)
 {
 	struct address_space *mapping;
-	unsigned long idx;
+	pgoff_t idx;
 
 	mapping = vma->vm_file->f_mapping;
-	idx = ((address - vma->vm_start) >> HPAGE_SHIFT)
-		+ (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
+	idx = vma_pagecache_offset(vma, address);
 
 	return find_lock_page(mapping, idx);
 }
@@ -1164,7 +1197,7 @@ static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			unsigned long address, pte_t *ptep, int write_access)
 {
 	int ret = VM_FAULT_SIGBUS;
-	unsigned long idx;
+	pgoff_t idx;
 	unsigned long size;
 	struct page *page;
 	struct address_space *mapping;
@@ -1183,8 +1216,7 @@ static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	}
 
 	mapping = vma->vm_file->f_mapping;
-	idx = ((address - vma->vm_start) >> HPAGE_SHIFT)
-		+ (vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
+	idx = vma_pagecache_offset(vma, address);
 
 	/*
 	 * Use page lock to guard against racing truncation
-- 
cgit v1.2.3


From cdfd4325c0d878679bd6a3ba8285b71d9980e3c0 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:27:28 -0700
Subject: mm: record MAP_NORESERVE status on vmas and fix small page mprotect
 reservations

With Mel's hugetlb private reservation support patches applied, strict
overcommit semantics are applied to both shared and private huge page
mappings.  This can be a problem if an application relied on unlimited
overcommit semantics for private mappings.  An example of this would be an
application which maps a huge area with the intention of using it very
sparsely.  These application would benefit from being able to opt-out of
the strict overcommit.  It should be noted that prior to hugetlb
supporting demand faulting all mappings were fully populated and so
applications of this type should be rare.

This patch stack implements the MAP_NORESERVE mmap() flag for huge page
mappings.  This flag has the same meaning as for small page mappings,
suppressing reservations for that mapping.

Thanks to Mel Gorman for reviewing a number of early versions of these
patches.

This patch:

When a small page mapping is created with mmap() reservations are created
by default for any memory pages required.  When the region is read/write
the reservation is increased for every page, no reservation is needed for
read-only regions (as they implicitly share the zero page).  Reservations
are tracked via the VM_ACCOUNT vma flag which is present when the region
has reservation backing it.  When we convert a region from read-only to
read-write new reservations are aquired and VM_ACCOUNT is set.  However,
when a read-only map is created with MAP_NORESERVE it is indistinguishable
from a normal mapping.  When we then convert that to read/write we are
forced to incorrectly create reservations for it as we have no record of
the original MAP_NORESERVE.

This patch introduces a new vma flag VM_NORESERVE which records the
presence of the original MAP_NORESERVE flag.  This allows us to
distinguish these two circumstances and correctly account the reserve.

As well as fixing this FIXME in the code, this makes it much easier to
introduce MAP_NORESERVE support for huge pages as this flag is available
consistantly for the life of the mapping.  VM_ACCOUNT on the other hand is
heavily used at the generic level in association with small pages.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/mm.h | 1 +
 mm/mmap.c          | 3 +++
 mm/mprotect.c      | 6 ++----
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/include/linux/mm.h b/include/linux/mm.h
index 196924b657b..df322fb4df3 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -100,6 +100,7 @@ extern unsigned int kobjsize(const void *objp);
 #define VM_DONTEXPAND	0x00040000	/* Cannot expand with mremap() */
 #define VM_RESERVED	0x00080000	/* Count as reserved_vm like IO */
 #define VM_ACCOUNT	0x00100000	/* Is a VM accounted object */
+#define VM_NORESERVE	0x00200000	/* should the VM suppress accounting */
 #define VM_HUGETLB	0x00400000	/* Huge TLB Page VM */
 #define VM_NONLINEAR	0x00800000	/* Is non-linear (remap_file_pages) */
 #define VM_MAPPED_COPY	0x01000000	/* T if mapped copy of data (nommu mmap) */
diff --git a/mm/mmap.c b/mm/mmap.c
index 75e0d0673d7..57d3b6097de 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1110,6 +1110,9 @@ munmap_back:
 	if (!may_expand_vm(mm, len >> PAGE_SHIFT))
 		return -ENOMEM;
 
+	if (flags & MAP_NORESERVE)
+		vm_flags |= VM_NORESERVE;
+
 	if (accountable && (!(flags & MAP_NORESERVE) ||
 			    sysctl_overcommit_memory == OVERCOMMIT_NEVER)) {
 		if (vm_flags & VM_SHARED) {
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 360d9cc8b38..abd645a3b0a 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -153,12 +153,10 @@ mprotect_fixup(struct vm_area_struct *vma, struct vm_area_struct **pprev,
 	 * If we make a private mapping writable we increase our commit;
 	 * but (without finer accounting) cannot reduce our commit if we
 	 * make it unwritable again.
-	 *
-	 * FIXME? We haven't defined a VM_NORESERVE flag, so mprotecting
-	 * a MAP_NORESERVE private mapping to writable will now reserve.
 	 */
 	if (newflags & VM_WRITE) {
-		if (!(oldflags & (VM_ACCOUNT|VM_WRITE|VM_SHARED))) {
+		if (!(oldflags & (VM_ACCOUNT|VM_WRITE|
+						VM_SHARED|VM_NORESERVE))) {
 			charged = nrpages;
 			if (security_vm_enough_memory(charged))
 				return -ENOMEM;
-- 
cgit v1.2.3


From 9682290484370ce68ba23cd2ec2838e301934199 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:27:29 -0700
Subject: hugetlb: move reservation region support earlier

The following patch will require use of the reservation regions support.
Move this earlier in the file.  No changes have been made to this code.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 246 ++++++++++++++++++++++++++++++-----------------------------
 1 file changed, 125 insertions(+), 121 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 3e873f0101f..05bc9af4fca 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -40,6 +40,131 @@ static int hugetlb_next_nid;
  */
 static DEFINE_SPINLOCK(hugetlb_lock);
 
+/*
+ * Region tracking -- allows tracking of reservations and instantiated pages
+ *                    across the pages in a mapping.
+ */
+struct file_region {
+	struct list_head link;
+	long from;
+	long to;
+};
+
+static long region_add(struct list_head *head, long f, long t)
+{
+	struct file_region *rg, *nrg, *trg;
+
+	/* Locate the region we are either in or before. */
+	list_for_each_entry(rg, head, link)
+		if (f <= rg->to)
+			break;
+
+	/* Round our left edge to the current segment if it encloses us. */
+	if (f > rg->from)
+		f = rg->from;
+
+	/* Check for and consume any regions we now overlap with. */
+	nrg = rg;
+	list_for_each_entry_safe(rg, trg, rg->link.prev, link) {
+		if (&rg->link == head)
+			break;
+		if (rg->from > t)
+			break;
+
+		/* If this area reaches higher then extend our area to
+		 * include it completely.  If this is not the first area
+		 * which we intend to reuse, free it. */
+		if (rg->to > t)
+			t = rg->to;
+		if (rg != nrg) {
+			list_del(&rg->link);
+			kfree(rg);
+		}
+	}
+	nrg->from = f;
+	nrg->to = t;
+	return 0;
+}
+
+static long region_chg(struct list_head *head, long f, long t)
+{
+	struct file_region *rg, *nrg;
+	long chg = 0;
+
+	/* Locate the region we are before or in. */
+	list_for_each_entry(rg, head, link)
+		if (f <= rg->to)
+			break;
+
+	/* If we are below the current region then a new region is required.
+	 * Subtle, allocate a new region at the position but make it zero
+	 * size such that we can guarantee to record the reservation. */
+	if (&rg->link == head || t < rg->from) {
+		nrg = kmalloc(sizeof(*nrg), GFP_KERNEL);
+		if (!nrg)
+			return -ENOMEM;
+		nrg->from = f;
+		nrg->to   = f;
+		INIT_LIST_HEAD(&nrg->link);
+		list_add(&nrg->link, rg->link.prev);
+
+		return t - f;
+	}
+
+	/* Round our left edge to the current segment if it encloses us. */
+	if (f > rg->from)
+		f = rg->from;
+	chg = t - f;
+
+	/* Check for and consume any regions we now overlap with. */
+	list_for_each_entry(rg, rg->link.prev, link) {
+		if (&rg->link == head)
+			break;
+		if (rg->from > t)
+			return chg;
+
+		/* We overlap with this area, if it extends futher than
+		 * us then we must extend ourselves.  Account for its
+		 * existing reservation. */
+		if (rg->to > t) {
+			chg += rg->to - t;
+			t = rg->to;
+		}
+		chg -= rg->to - rg->from;
+	}
+	return chg;
+}
+
+static long region_truncate(struct list_head *head, long end)
+{
+	struct file_region *rg, *trg;
+	long chg = 0;
+
+	/* Locate the region we are either in or before. */
+	list_for_each_entry(rg, head, link)
+		if (end <= rg->to)
+			break;
+	if (&rg->link == head)
+		return 0;
+
+	/* If we are in the middle of a region then adjust it. */
+	if (end > rg->from) {
+		chg = rg->to - end;
+		rg->to = end;
+		rg = list_entry(rg->link.next, typeof(*rg), link);
+	}
+
+	/* Drop any remaining regions. */
+	list_for_each_entry_safe(rg, trg, rg->link.prev, link) {
+		if (&rg->link == head)
+			break;
+		chg += rg->to - rg->from;
+		list_del(&rg->link);
+		kfree(rg);
+	}
+	return chg;
+}
+
 /*
  * Convert the address within this vma to the page offset within
  * the mapping, in base page units.
@@ -1429,127 +1554,6 @@ void hugetlb_change_protection(struct vm_area_struct *vma,
 	flush_tlb_range(vma, start, end);
 }
 
-struct file_region {
-	struct list_head link;
-	long from;
-	long to;
-};
-
-static long region_add(struct list_head *head, long f, long t)
-{
-	struct file_region *rg, *nrg, *trg;
-
-	/* Locate the region we are either in or before. */
-	list_for_each_entry(rg, head, link)
-		if (f <= rg->to)
-			break;
-
-	/* Round our left edge to the current segment if it encloses us. */
-	if (f > rg->from)
-		f = rg->from;
-
-	/* Check for and consume any regions we now overlap with. */
-	nrg = rg;
-	list_for_each_entry_safe(rg, trg, rg->link.prev, link) {
-		if (&rg->link == head)
-			break;
-		if (rg->from > t)
-			break;
-
-		/* If this area reaches higher then extend our area to
-		 * include it completely.  If this is not the first area
-		 * which we intend to reuse, free it. */
-		if (rg->to > t)
-			t = rg->to;
-		if (rg != nrg) {
-			list_del(&rg->link);
-			kfree(rg);
-		}
-	}
-	nrg->from = f;
-	nrg->to = t;
-	return 0;
-}
-
-static long region_chg(struct list_head *head, long f, long t)
-{
-	struct file_region *rg, *nrg;
-	long chg = 0;
-
-	/* Locate the region we are before or in. */
-	list_for_each_entry(rg, head, link)
-		if (f <= rg->to)
-			break;
-
-	/* If we are below the current region then a new region is required.
-	 * Subtle, allocate a new region at the position but make it zero
-	 * size such that we can guarantee to record the reservation. */
-	if (&rg->link == head || t < rg->from) {
-		nrg = kmalloc(sizeof(*nrg), GFP_KERNEL);
-		if (!nrg)
-			return -ENOMEM;
-		nrg->from = f;
-		nrg->to   = f;
-		INIT_LIST_HEAD(&nrg->link);
-		list_add(&nrg->link, rg->link.prev);
-
-		return t - f;
-	}
-
-	/* Round our left edge to the current segment if it encloses us. */
-	if (f > rg->from)
-		f = rg->from;
-	chg = t - f;
-
-	/* Check for and consume any regions we now overlap with. */
-	list_for_each_entry(rg, rg->link.prev, link) {
-		if (&rg->link == head)
-			break;
-		if (rg->from > t)
-			return chg;
-
-		/* We overlap with this area, if it extends futher than
-		 * us then we must extend ourselves.  Account for its
-		 * existing reservation. */
-		if (rg->to > t) {
-			chg += rg->to - t;
-			t = rg->to;
-		}
-		chg -= rg->to - rg->from;
-	}
-	return chg;
-}
-
-static long region_truncate(struct list_head *head, long end)
-{
-	struct file_region *rg, *trg;
-	long chg = 0;
-
-	/* Locate the region we are either in or before. */
-	list_for_each_entry(rg, head, link)
-		if (end <= rg->to)
-			break;
-	if (&rg->link == head)
-		return 0;
-
-	/* If we are in the middle of a region then adjust it. */
-	if (end > rg->from) {
-		chg = rg->to - end;
-		rg->to = end;
-		rg = list_entry(rg->link.next, typeof(*rg), link);
-	}
-
-	/* Drop any remaining regions. */
-	list_for_each_entry_safe(rg, trg, rg->link.prev, link) {
-		if (&rg->link == head)
-			break;
-		chg += rg->to - rg->from;
-		list_del(&rg->link);
-		kfree(rg);
-	}
-	return chg;
-}
-
 int hugetlb_reserve_pages(struct inode *inode,
 					long from, long to,
 					struct vm_area_struct *vma)
-- 
cgit v1.2.3


From c37f9fb11c976ffc08200d631dada6dcbfd07ea4 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:27:30 -0700
Subject: hugetlb: allow huge page mappings to be created without reservations

By default all shared mappings and most private mappings now have
reservations associated with them.  This improves semantics by providing
allocation guarentees to the mapper.  However a small number of
applications may attempt to make very large sparse mappings, with these
strict reservations the system will never be able to honour the mapping.

This patch set brings MAP_NORESERVE support to hugetlb files.  This allows
new mappings to be made to hugetlbfs files without an associated
reservation, for both shared and private mappings.  This allows
applications which want to create very sparse mappings to opt-out of the
reservation system.  Obviously as there is no reservation they are liable
to fault at runtime if the huge page pool becomes exhausted; buyer beware.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 53 insertions(+), 5 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 05bc9af4fca..72acbb29d2c 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -247,6 +247,9 @@ static int is_vma_resv_set(struct vm_area_struct *vma, unsigned long flag)
 /* Decrement the reserved pages in the hugepage pool by one */
 static void decrement_hugepage_resv_vma(struct vm_area_struct *vma)
 {
+	if (vma->vm_flags & VM_NORESERVE)
+		return;
+
 	if (vma->vm_flags & VM_SHARED) {
 		/* Shared mappings always use reserves */
 		resv_huge_pages--;
@@ -720,25 +723,65 @@ static void return_unused_surplus_pages(unsigned long unused_resv_pages)
 	}
 }
 
+/*
+ * Determine if the huge page at addr within the vma has an associated
+ * reservation.  Where it does not we will need to logically increase
+ * reservation and actually increase quota before an allocation can occur.
+ * Where any new reservation would be required the reservation change is
+ * prepared, but not committed.  Once the page has been quota'd allocated
+ * an instantiated the change should be committed via vma_commit_reservation.
+ * No action is required on failure.
+ */
+static int vma_needs_reservation(struct vm_area_struct *vma, unsigned long addr)
+{
+	struct address_space *mapping = vma->vm_file->f_mapping;
+	struct inode *inode = mapping->host;
+
+	if (vma->vm_flags & VM_SHARED) {
+		pgoff_t idx = vma_pagecache_offset(vma, addr);
+		return region_chg(&inode->i_mapping->private_list,
+							idx, idx + 1);
+
+	} else {
+		if (!is_vma_resv_set(vma, HPAGE_RESV_OWNER))
+			return 1;
+	}
+
+	return 0;
+}
+static void vma_commit_reservation(struct vm_area_struct *vma,
+							unsigned long addr)
+{
+	struct address_space *mapping = vma->vm_file->f_mapping;
+	struct inode *inode = mapping->host;
+
+	if (vma->vm_flags & VM_SHARED) {
+		pgoff_t idx = vma_pagecache_offset(vma, addr);
+		region_add(&inode->i_mapping->private_list, idx, idx + 1);
+	}
+}
+
 static struct page *alloc_huge_page(struct vm_area_struct *vma,
 				    unsigned long addr, int avoid_reserve)
 {
 	struct page *page;
 	struct address_space *mapping = vma->vm_file->f_mapping;
 	struct inode *inode = mapping->host;
-	unsigned int chg = 0;
+	unsigned int chg;
 
 	/*
 	 * Processes that did not create the mapping will have no reserves and
 	 * will not have accounted against quota. Check that the quota can be
 	 * made before satisfying the allocation
+	 * MAP_NORESERVE mappings may also need pages and quota allocated
+	 * if no reserve mapping overlaps.
 	 */
-	if (!(vma->vm_flags & VM_SHARED) &&
-			!is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
-		chg = 1;
+	chg = vma_needs_reservation(vma, addr);
+	if (chg < 0)
+		return ERR_PTR(chg);
+	if (chg)
 		if (hugetlb_get_quota(inode->i_mapping, chg))
 			return ERR_PTR(-ENOSPC);
-	}
 
 	spin_lock(&hugetlb_lock);
 	page = dequeue_huge_page_vma(vma, addr, avoid_reserve);
@@ -755,6 +798,8 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
 	set_page_refcounted(page);
 	set_page_private(page, (unsigned long) mapping);
 
+	vma_commit_reservation(vma, addr);
+
 	return page;
 }
 
@@ -1560,6 +1605,9 @@ int hugetlb_reserve_pages(struct inode *inode,
 {
 	long ret, chg;
 
+	if (vma && vma->vm_flags & VM_NORESERVE)
+		return 0;
+
 	/*
 	 * Shared mappings base their reservation on the number of pages that
 	 * are already allocated on behalf of the file. Private mappings need
-- 
cgit v1.2.3


From 84afd99b8398c9d73af8238aa3cd835858e3097a Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:27:32 -0700
Subject: hugetlb reservations: fix hugetlb MAP_PRIVATE reservations across vma
 splits

When a hugetlb mapping with a reservation is split, a new VMA is cloned
from the original.  This new VMA is a direct copy of the original
including the reservation count.  When this pair of VMAs are unmapped we
will incorrect double account the unused reservation and the overall
reservation count will be incorrect, in extreme cases it will wrap.

The problem occurs when we split an existing VMA say to unmap a page in
the middle.  split_vma() will create a new VMA copying all fields from the
original.  As we are storing our reservation count in vm_private_data this
is also copies, endowing the new VMA with a duplicate of the original
VMA's reservation.  Neither of the new VMAs can exhaust these reservations
as they are too small, but when we unmap and close these VMAs we will
incorrect credit the remainder twice and resv_huge_pages will become out
of sync.  This can lead to allocation failures on mappings with
reservations and even to resv_huge_pages wrapping which prevents all
subsequent hugepage allocations.

The simple fix would be to correctly apportion the remaining reservation
count when the split is made.  However the only hook we have vm_ops->open
only has the new VMA we do not know the identity of the preceeding VMA.
Also even if we did have that VMA to hand we do not know how much of the
reservation was consumed each side of the split.

This patch therefore takes a different tack.  We know that the whole of
any private mapping (which has a reservation) has a reservation over its
whole size.  Any present pages represent consumed reservation.  Therefore
if we track the instantiated pages we can calculate the remaining
reservation.

This patch reuses the existing regions code to track the regions for which
we have consumed reservation (ie.  the instantiated pages), as each page
is faulted in we record the consumption of reservation for the new page.
When we need to return unused reservations at unmap time we simply count
the consumed reservation region subtracting that from the whole of the
map.  During a VMA split the newly opened VMA will point to the same
region map, as this map is offset oriented it remains valid for both of
the split VMAs.  This map is referenced counted so that it is removed when
all VMAs which are part of the mmap are gone.

Thanks to Adam Litke and Mel Gorman for their review feedback.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 172 +++++++++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 145 insertions(+), 27 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 72acbb29d2c..65616941a38 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -43,6 +43,16 @@ static DEFINE_SPINLOCK(hugetlb_lock);
 /*
  * Region tracking -- allows tracking of reservations and instantiated pages
  *                    across the pages in a mapping.
+ *
+ * The region data structures are protected by a combination of the mmap_sem
+ * and the hugetlb_instantion_mutex.  To access or modify a region the caller
+ * must either hold the mmap_sem for write, or the mmap_sem for read and
+ * the hugetlb_instantiation mutex:
+ *
+ * 	down_write(&mm->mmap_sem);
+ * or
+ * 	down_read(&mm->mmap_sem);
+ * 	mutex_lock(&hugetlb_instantiation_mutex);
  */
 struct file_region {
 	struct list_head link;
@@ -165,6 +175,30 @@ static long region_truncate(struct list_head *head, long end)
 	return chg;
 }
 
+static long region_count(struct list_head *head, long f, long t)
+{
+	struct file_region *rg;
+	long chg = 0;
+
+	/* Locate each segment we overlap with, and count that overlap. */
+	list_for_each_entry(rg, head, link) {
+		int seg_from;
+		int seg_to;
+
+		if (rg->to <= f)
+			continue;
+		if (rg->from >= t)
+			break;
+
+		seg_from = max(rg->from, f);
+		seg_to = min(rg->to, t);
+
+		chg += seg_to - seg_from;
+	}
+
+	return chg;
+}
+
 /*
  * Convert the address within this vma to the page offset within
  * the mapping, in base page units.
@@ -187,9 +221,15 @@ static pgoff_t vma_pagecache_offset(struct vm_area_struct *vma,
 			(vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
 }
 
-#define HPAGE_RESV_OWNER    (1UL << (BITS_PER_LONG - 1))
-#define HPAGE_RESV_UNMAPPED (1UL << (BITS_PER_LONG - 2))
+/*
+ * Flags for MAP_PRIVATE reservations.  These are stored in the bottom
+ * bits of the reservation map pointer, which are always clear due to
+ * alignment.
+ */
+#define HPAGE_RESV_OWNER    (1UL << 0)
+#define HPAGE_RESV_UNMAPPED (1UL << 1)
 #define HPAGE_RESV_MASK (HPAGE_RESV_OWNER | HPAGE_RESV_UNMAPPED)
+
 /*
  * These helpers are used to track how many pages are reserved for
  * faults in a MAP_PRIVATE mapping. Only the process that called mmap()
@@ -199,6 +239,15 @@ static pgoff_t vma_pagecache_offset(struct vm_area_struct *vma,
  * the reserve counters are updated with the hugetlb_lock held. It is safe
  * to reset the VMA at fork() time as it is not in use yet and there is no
  * chance of the global counters getting corrupted as a result of the values.
+ *
+ * The private mapping reservation is represented in a subtly different
+ * manner to a shared mapping.  A shared mapping has a region map associated
+ * with the underlying file, this region map represents the backing file
+ * pages which have ever had a reservation assigned which this persists even
+ * after the page is instantiated.  A private mapping has a region map
+ * associated with the original mmap which is attached to all VMAs which
+ * reference it, this region map represents those offsets which have consumed
+ * reservation ie. where pages have been instantiated.
  */
 static unsigned long get_vma_private_data(struct vm_area_struct *vma)
 {
@@ -211,22 +260,48 @@ static void set_vma_private_data(struct vm_area_struct *vma,
 	vma->vm_private_data = (void *)value;
 }
 
-static unsigned long vma_resv_huge_pages(struct vm_area_struct *vma)
+struct resv_map {
+	struct kref refs;
+	struct list_head regions;
+};
+
+struct resv_map *resv_map_alloc(void)
+{
+	struct resv_map *resv_map = kmalloc(sizeof(*resv_map), GFP_KERNEL);
+	if (!resv_map)
+		return NULL;
+
+	kref_init(&resv_map->refs);
+	INIT_LIST_HEAD(&resv_map->regions);
+
+	return resv_map;
+}
+
+void resv_map_release(struct kref *ref)
+{
+	struct resv_map *resv_map = container_of(ref, struct resv_map, refs);
+
+	/* Clear out any active regions before we release the map. */
+	region_truncate(&resv_map->regions, 0);
+	kfree(resv_map);
+}
+
+static struct resv_map *vma_resv_map(struct vm_area_struct *vma)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
 	if (!(vma->vm_flags & VM_SHARED))
-		return get_vma_private_data(vma) & ~HPAGE_RESV_MASK;
+		return (struct resv_map *)(get_vma_private_data(vma) &
+							~HPAGE_RESV_MASK);
 	return 0;
 }
 
-static void set_vma_resv_huge_pages(struct vm_area_struct *vma,
-							unsigned long reserve)
+static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map)
 {
 	VM_BUG_ON(!is_vm_hugetlb_page(vma));
 	VM_BUG_ON(vma->vm_flags & VM_SHARED);
 
-	set_vma_private_data(vma,
-		(get_vma_private_data(vma) & HPAGE_RESV_MASK) | reserve);
+	set_vma_private_data(vma, (get_vma_private_data(vma) &
+				HPAGE_RESV_MASK) | (unsigned long)map);
 }
 
 static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags)
@@ -253,19 +328,12 @@ static void decrement_hugepage_resv_vma(struct vm_area_struct *vma)
 	if (vma->vm_flags & VM_SHARED) {
 		/* Shared mappings always use reserves */
 		resv_huge_pages--;
-	} else {
+	} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
 		/*
 		 * Only the process that called mmap() has reserves for
 		 * private mappings.
 		 */
-		if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
-			unsigned long flags, reserve;
-			resv_huge_pages--;
-			flags = (unsigned long)vma->vm_private_data &
-							HPAGE_RESV_MASK;
-			reserve = (unsigned long)vma->vm_private_data - 1;
-			vma->vm_private_data = (void *)(reserve | flags);
-		}
+		resv_huge_pages--;
 	}
 }
 
@@ -282,7 +350,7 @@ static int vma_has_private_reserves(struct vm_area_struct *vma)
 {
 	if (vma->vm_flags & VM_SHARED)
 		return 0;
-	if (!vma_resv_huge_pages(vma))
+	if (!is_vma_resv_set(vma, HPAGE_RESV_OWNER))
 		return 0;
 	return 1;
 }
@@ -742,12 +810,19 @@ static int vma_needs_reservation(struct vm_area_struct *vma, unsigned long addr)
 		return region_chg(&inode->i_mapping->private_list,
 							idx, idx + 1);
 
-	} else {
-		if (!is_vma_resv_set(vma, HPAGE_RESV_OWNER))
-			return 1;
-	}
+	} else if (!is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
+		return 1;
 
-	return 0;
+	} else  {
+		int err;
+		pgoff_t idx = vma_pagecache_offset(vma, addr);
+		struct resv_map *reservations = vma_resv_map(vma);
+
+		err = region_chg(&reservations->regions, idx, idx + 1);
+		if (err < 0)
+			return err;
+		return 0;
+	}
 }
 static void vma_commit_reservation(struct vm_area_struct *vma,
 							unsigned long addr)
@@ -758,6 +833,13 @@ static void vma_commit_reservation(struct vm_area_struct *vma,
 	if (vma->vm_flags & VM_SHARED) {
 		pgoff_t idx = vma_pagecache_offset(vma, addr);
 		region_add(&inode->i_mapping->private_list, idx, idx + 1);
+
+	} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
+		pgoff_t idx = vma_pagecache_offset(vma, addr);
+		struct resv_map *reservations = vma_resv_map(vma);
+
+		/* Mark this page used in the map. */
+		region_add(&reservations->regions, idx, idx + 1);
 	}
 }
 
@@ -1047,11 +1129,41 @@ out:
 	return ret;
 }
 
+static void hugetlb_vm_op_open(struct vm_area_struct *vma)
+{
+	struct resv_map *reservations = vma_resv_map(vma);
+
+	/*
+	 * This new VMA should share its siblings reservation map if present.
+	 * The VMA will only ever have a valid reservation map pointer where
+	 * it is being copied for another still existing VMA.  As that VMA
+	 * has a reference to the reservation map it cannot dissappear until
+	 * after this open call completes.  It is therefore safe to take a
+	 * new reference here without additional locking.
+	 */
+	if (reservations)
+		kref_get(&reservations->refs);
+}
+
 static void hugetlb_vm_op_close(struct vm_area_struct *vma)
 {
-	unsigned long reserve = vma_resv_huge_pages(vma);
-	if (reserve)
-		hugetlb_acct_memory(-reserve);
+	struct resv_map *reservations = vma_resv_map(vma);
+	unsigned long reserve;
+	unsigned long start;
+	unsigned long end;
+
+	if (reservations) {
+		start = vma_pagecache_offset(vma, vma->vm_start);
+		end = vma_pagecache_offset(vma, vma->vm_end);
+
+		reserve = (end - start) -
+			region_count(&reservations->regions, start, end);
+
+		kref_put(&reservations->refs, resv_map_release);
+
+		if (reserve)
+			hugetlb_acct_memory(-reserve);
+	}
 }
 
 /*
@@ -1068,6 +1180,7 @@ static int hugetlb_vm_op_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 
 struct vm_operations_struct hugetlb_vm_ops = {
 	.fault = hugetlb_vm_op_fault,
+	.open = hugetlb_vm_op_open,
 	.close = hugetlb_vm_op_close,
 };
 
@@ -1617,8 +1730,13 @@ int hugetlb_reserve_pages(struct inode *inode,
 	if (!vma || vma->vm_flags & VM_SHARED)
 		chg = region_chg(&inode->i_mapping->private_list, from, to);
 	else {
+		struct resv_map *resv_map = resv_map_alloc();
+		if (!resv_map)
+			return -ENOMEM;
+
 		chg = to - from;
-		set_vma_resv_huge_pages(vma, chg);
+
+		set_vma_resv_map(vma, resv_map);
 		set_vma_resv_flags(vma, HPAGE_RESV_OWNER);
 	}
 
-- 
cgit v1.2.3


From a858f7b2e9bb4eb665176dde5cf32eeaaf90f153 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:27:33 -0700
Subject: vma_page_offset() has no callees: drop it

Hugh adds: vma_pagecache_offset() has a dangerously misleading name, since
it's using hugepage units: rename it to vma_hugecache_offset().

[apw@shadowen.org: restack onto fixed MAP_PRIVATE reservations]
[akpm@linux-foundation.org: vma_split conversion]
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 65616941a38..eda9642254a 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -199,22 +199,11 @@ static long region_count(struct list_head *head, long f, long t)
 	return chg;
 }
 
-/*
- * Convert the address within this vma to the page offset within
- * the mapping, in base page units.
- */
-static pgoff_t vma_page_offset(struct vm_area_struct *vma,
-				unsigned long address)
-{
-	return ((address - vma->vm_start) >> PAGE_SHIFT) +
-					(vma->vm_pgoff >> PAGE_SHIFT);
-}
-
 /*
  * Convert the address within this vma to the page offset within
  * the mapping, in pagecache page units; huge pages here.
  */
-static pgoff_t vma_pagecache_offset(struct vm_area_struct *vma,
+static pgoff_t vma_hugecache_offset(struct vm_area_struct *vma,
 					unsigned long address)
 {
 	return ((address - vma->vm_start) >> HPAGE_SHIFT) +
@@ -806,7 +795,7 @@ static int vma_needs_reservation(struct vm_area_struct *vma, unsigned long addr)
 	struct inode *inode = mapping->host;
 
 	if (vma->vm_flags & VM_SHARED) {
-		pgoff_t idx = vma_pagecache_offset(vma, addr);
+		pgoff_t idx = vma_hugecache_offset(vma, addr);
 		return region_chg(&inode->i_mapping->private_list,
 							idx, idx + 1);
 
@@ -815,7 +804,7 @@ static int vma_needs_reservation(struct vm_area_struct *vma, unsigned long addr)
 
 	} else  {
 		int err;
-		pgoff_t idx = vma_pagecache_offset(vma, addr);
+		pgoff_t idx = vma_hugecache_offset(vma, addr);
 		struct resv_map *reservations = vma_resv_map(vma);
 
 		err = region_chg(&reservations->regions, idx, idx + 1);
@@ -831,11 +820,11 @@ static void vma_commit_reservation(struct vm_area_struct *vma,
 	struct inode *inode = mapping->host;
 
 	if (vma->vm_flags & VM_SHARED) {
-		pgoff_t idx = vma_pagecache_offset(vma, addr);
+		pgoff_t idx = vma_hugecache_offset(vma, addr);
 		region_add(&inode->i_mapping->private_list, idx, idx + 1);
 
 	} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
-		pgoff_t idx = vma_pagecache_offset(vma, addr);
+		pgoff_t idx = vma_hugecache_offset(vma, addr);
 		struct resv_map *reservations = vma_resv_map(vma);
 
 		/* Mark this page used in the map. */
@@ -1153,8 +1142,8 @@ static void hugetlb_vm_op_close(struct vm_area_struct *vma)
 	unsigned long end;
 
 	if (reservations) {
-		start = vma_pagecache_offset(vma, vma->vm_start);
-		end = vma_pagecache_offset(vma, vma->vm_end);
+		start = vma_hugecache_offset(vma, vma->vm_start);
+		end = vma_hugecache_offset(vma, vma->vm_end);
 
 		reserve = (end - start) -
 			region_count(&reservations->regions, start, end);
@@ -1471,7 +1460,7 @@ static struct page *hugetlbfs_pagecache_page(struct vm_area_struct *vma,
 	pgoff_t idx;
 
 	mapping = vma->vm_file->f_mapping;
-	idx = vma_pagecache_offset(vma, address);
+	idx = vma_hugecache_offset(vma, address);
 
 	return find_lock_page(mapping, idx);
 }
@@ -1499,7 +1488,7 @@ static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	}
 
 	mapping = vma->vm_file->f_mapping;
-	idx = vma_pagecache_offset(vma, address);
+	idx = vma_hugecache_offset(vma, address);
 
 	/*
 	 * Use page lock to guard against racing truncation
-- 
cgit v1.2.3


From 11fa977ecde652ab324dd79c179deb52e82a8df1 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Wed, 23 Jul 2008 21:27:34 -0700
Subject: generic_file_aio_read() cleanups

As akpm points out, there's really no need for generic_file_aio_read to
make a special case of count 0: just loop through nr_segs doing nothing.
And as Harvey Harrison points out, there's no need to reset retval to 0
where it's already 0.

Setting count (or ocount) to 0 before calling generic_segment_checks is
unnecessary too; but reluctantly I'll leave that removal to someone with a
wider range of gcc versions to hand - 4.1.2 and 4.2.1 don't warn about it,
but perhaps others do - I forget which are the warniest versions.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Tested-by: Lawrence Greenfield <leg@google.com>
Cc: Christoph Rohland <hans-christoph.rohland@sap.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/filemap.c | 42 +++++++++++++++++++-----------------------
 1 file changed, 19 insertions(+), 23 deletions(-)

diff --git a/mm/filemap.c b/mm/filemap.c
index 6343f3c841b..7675b91f4f6 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1197,7 +1197,6 @@ generic_file_aio_read(struct kiocb *iocb, const struct iovec *iov,
 
 		mapping = filp->f_mapping;
 		inode = mapping->host;
-		retval = 0;
 		if (!count)
 			goto out; /* skip atime */
 		size = i_size_read(inode);
@@ -1209,33 +1208,30 @@ generic_file_aio_read(struct kiocb *iocb, const struct iovec *iov,
 			}
 			if (retval > 0)
 				*ppos = pos + retval;
-		}
-		if (likely(retval != 0)) {
-			file_accessed(filp);
-			goto out;
+			if (retval) {
+				file_accessed(filp);
+				goto out;
+			}
 		}
 	}
 
-	retval = 0;
-	if (count) {
-		for (seg = 0; seg < nr_segs; seg++) {
-			read_descriptor_t desc;
+	for (seg = 0; seg < nr_segs; seg++) {
+		read_descriptor_t desc;
 
-			desc.written = 0;
-			desc.arg.buf = iov[seg].iov_base;
-			desc.count = iov[seg].iov_len;
-			if (desc.count == 0)
-				continue;
-			desc.error = 0;
-			do_generic_file_read(filp,ppos,&desc,file_read_actor);
-			retval += desc.written;
-			if (desc.error) {
-				retval = retval ?: desc.error;
-				break;
-			}
-			if (desc.count > 0)
-				break;
+		desc.written = 0;
+		desc.arg.buf = iov[seg].iov_base;
+		desc.count = iov[seg].iov_len;
+		if (desc.count == 0)
+			continue;
+		desc.error = 0;
+		do_generic_file_read(filp, ppos, &desc, file_read_actor);
+		retval += desc.written;
+		if (desc.error) {
+			retval = retval ?: desc.error;
+			break;
 		}
+		if (desc.count > 0)
+			break;
 	}
 out:
 	return retval;
-- 
cgit v1.2.3


From bcd78e49613c41b5bed96fa288e983876f286a59 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Wed, 23 Jul 2008 21:27:35 -0700
Subject: tmpfs: support aio

We have a request for tmpfs to support the AIO interface: easily done, no
more than replacing the old shmem_file_read by shmem_file_aio_read,
cribbed from generic_file_aio_read.  (In 2.6.25 its write side was already
changed to use generic_file_aio_write.)

Incorporate cleanups from Andrew Morton and Harvey Harrison.

Tests out fine with LTP's ltp-aiodio.sh, given hacks (not included) to
support O_DIRECT.  tmpfs cannot honestly support O_DIRECT: its
cache-avoiding-IO nature is at odds with direct IO-avoiding-cache.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Tested-by: Lawrence Greenfield <leg@google.com>
Cc: Christoph Rohland <hans-christoph.rohland@sap.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/shmem.c | 55 ++++++++++++++++++++++++++++++++++---------------------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/mm/shmem.c b/mm/shmem.c
index e2a6ae1a44e..9ffbea9b79e 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1690,26 +1690,38 @@ static void do_shmem_file_read(struct file *filp, loff_t *ppos, read_descriptor_
 	file_accessed(filp);
 }
 
-static ssize_t shmem_file_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
-{
-	read_descriptor_t desc;
-
-	if ((ssize_t) count < 0)
-		return -EINVAL;
-	if (!access_ok(VERIFY_WRITE, buf, count))
-		return -EFAULT;
-	if (!count)
-		return 0;
-
-	desc.written = 0;
-	desc.count = count;
-	desc.arg.buf = buf;
-	desc.error = 0;
-
-	do_shmem_file_read(filp, ppos, &desc, file_read_actor);
-	if (desc.written)
-		return desc.written;
-	return desc.error;
+static ssize_t shmem_file_aio_read(struct kiocb *iocb,
+		const struct iovec *iov, unsigned long nr_segs, loff_t pos)
+{
+	struct file *filp = iocb->ki_filp;
+	ssize_t retval;
+	unsigned long seg;
+	size_t count;
+	loff_t *ppos = &iocb->ki_pos;
+
+	retval = generic_segment_checks(iov, &nr_segs, &count, VERIFY_WRITE);
+	if (retval)
+		return retval;
+
+	for (seg = 0; seg < nr_segs; seg++) {
+		read_descriptor_t desc;
+
+		desc.written = 0;
+		desc.arg.buf = iov[seg].iov_base;
+		desc.count = iov[seg].iov_len;
+		if (desc.count == 0)
+			continue;
+		desc.error = 0;
+		do_shmem_file_read(filp, ppos, &desc, file_read_actor);
+		retval += desc.written;
+		if (desc.error) {
+			retval = retval ?: desc.error;
+			break;
+		}
+		if (desc.count > 0)
+			break;
+	}
+	return retval;
 }
 
 static int shmem_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -2369,8 +2381,9 @@ static const struct file_operations shmem_file_operations = {
 	.mmap		= shmem_mmap,
 #ifdef CONFIG_TMPFS
 	.llseek		= generic_file_llseek,
-	.read		= shmem_file_read,
+	.read		= do_sync_read,
 	.write		= do_sync_write,
+	.aio_read	= shmem_file_aio_read,
 	.aio_write	= generic_file_aio_write,
 	.fsync		= simple_sync_file,
 	.splice_read	= generic_file_splice_read,
-- 
cgit v1.2.3


From cce770815869e9209171d819dfde89bcc738ab62 Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@suse.cz>
Date: Wed, 23 Jul 2008 21:27:36 -0700
Subject: SYNC_FILE_RANGE_WRITE may and will block. Document that.

[akpm@linux-foundation.org: fix comment text]
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/sync.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/sync.c b/fs/sync.c
index 228e17b5e9e..2967562d416 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -139,7 +139,8 @@ asmlinkage long sys_fdatasync(unsigned int fd)
  * before performing the write.
  *
  * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
- * range which are not presently under writeback.
+ * range which are not presently under writeback. Note that this may block for
+ * significant periods due to exhaustion of disk request structures.
  *
  * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
  * after performing the write.
-- 
cgit v1.2.3


From a47a126ad5ea072aca3e611ed8f8dc6adad24bab Mon Sep 17 00:00:00 2001
From: Eric Dumazet <dada1@cosmosbay.com>
Date: Wed, 23 Jul 2008 21:27:38 -0700
Subject: vmallocinfo: add NUMA information

Christoph recently added /proc/vmallocinfo file to get information about
vmalloc allocations.

This patch adds NUMA specific information, giving number of pages
allocated on each memory node.

This should help to check that vmalloc() is able to respect NUMA policies.

Example of output on a four nodes machine (one cpu per node)

1) network hash tables are evenly spreaded on four nodes (OK) (Same
   point for inodes and dentries hash tables)

2) iptables tables (x_tables) are correctly allocated on each cpu node
   (OK).

3) sys_swapon() allocates its memory from one node only.

4) each loaded module is using memory on one node.

Sysadmins could tune their setup to change points 3) and 4) if necessary.

grep "pages="  /proc/vmallocinfo
0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204/0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
0xffffc2000031a000-0xffffc2000031d000   12288 alloc_large_system_hash+0x204/0x2c0 pages=2 vmalloc N1=1 N2=1
0xffffc2000031f000-0xffffc2000032b000   49152 cramfs_uncompress_init+0x2e/0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
0xffffc2000033e000-0xffffc20000341000   12288 sys_swapon+0x640/0xac0 pages=2 vmalloc N0=2
0xffffc20000341000-0xffffc20000344000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N0=2
0xffffc20000344000-0xffffc20000347000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N1=2
0xffffc20000347000-0xffffc2000034a000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N2=2
0xffffc2000034a000-0xffffc2000034d000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N3=2
0xffffc20004381000-0xffffc20004402000  528384 alloc_large_system_hash+0x204/0x2c0 pages=128 vmalloc N0=32 N1=32 N2=32 N3=32
0xffffc20004402000-0xffffc20004803000 4198400 alloc_large_system_hash+0x204/0x2c0 pages=1024 vmalloc vpages N0=256 N1=256 N2=256 N3=256
0xffffc20004803000-0xffffc20004904000 1052672 alloc_large_system_hash+0x204/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
0xffffc20004904000-0xffffc20004bec000 3047424 sys_swapon+0x640/0xac0 pages=743 vmalloc vpages N0=743
0xffffffffa0000000-0xffffffffa000f000   61440 sys_init_module+0xc27/0x1d00 pages=14 vmalloc N1=14
0xffffffffa000f000-0xffffffffa0014000   20480 sys_init_module+0xc27/0x1d00 pages=4 vmalloc N0=4
0xffffffffa0014000-0xffffffffa0017000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N0=2
0xffffffffa0017000-0xffffffffa0022000   45056 sys_init_module+0xc27/0x1d00 pages=10 vmalloc N1=10
0xffffffffa0022000-0xffffffffa0028000   24576 sys_init_module+0xc27/0x1d00 pages=5 vmalloc N3=5
0xffffffffa0028000-0xffffffffa0050000  163840 sys_init_module+0xc27/0x1d00 pages=39 vmalloc N1=39
0xffffffffa0050000-0xffffffffa0052000    8192 sys_init_module+0xc27/0x1d00 pages=1 vmalloc N1=1
0xffffffffa0052000-0xffffffffa0056000   16384 sys_init_module+0xc27/0x1d00 pages=3 vmalloc N1=3
0xffffffffa0056000-0xffffffffa0081000  176128 sys_init_module+0xc27/0x1d00 pages=42 vmalloc N3=42
0xffffffffa0081000-0xffffffffa00ae000  184320 sys_init_module+0xc27/0x1d00 pages=44 vmalloc N3=44
0xffffffffa00ae000-0xffffffffa00b1000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2
0xffffffffa00b1000-0xffffffffa00b9000   32768 sys_init_module+0xc27/0x1d00 pages=7 vmalloc N0=7
0xffffffffa00b9000-0xffffffffa00c4000   45056 sys_init_module+0xc27/0x1d00 pages=10 vmalloc N3=10
0xffffffffa00c6000-0xffffffffa00e0000  106496 sys_init_module+0xc27/0x1d00 pages=25 vmalloc N2=25
0xffffffffa00e0000-0xffffffffa00f1000   69632 sys_init_module+0xc27/0x1d00 pages=16 vmalloc N2=16
0xffffffffa00f1000-0xffffffffa00f4000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2
0xffffffffa00f4000-0xffffffffa00f7000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2

[akpm@linux-foundation.org: fix comment]
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/proc.txt | 44 ++++++++++++++++++++++++++++++++++++++
 fs/proc/proc_misc.c                | 15 +++++++++++--
 mm/vmalloc.c                       | 20 +++++++++++++++++
 3 files changed, 77 insertions(+), 2 deletions(-)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 7f268f327d7..8c6384bdfed 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -296,6 +296,7 @@ Table 1-4: Kernel info in /proc
  uptime      System uptime                                     
  version     Kernel version                                    
  video	     bttv info of video resources			(2.4)
+ vmallocinfo Show vmalloced areas
 ..............................................................................
 
 You can,  for  example,  check  which interrupts are currently in use and what
@@ -557,6 +558,49 @@ VmallocTotal: total size of vmalloc memory area
  VmallocUsed: amount of vmalloc area which is used
 VmallocChunk: largest contigious block of vmalloc area which is free
 
+..............................................................................
+
+vmallocinfo:
+
+Provides information about vmalloced/vmaped areas. One line per area,
+containing the virtual address range of the area, size in bytes,
+caller information of the creator, and optional information depending
+on the kind of area :
+
+ pages=nr    number of pages
+ phys=addr   if a physical address was specified
+ ioremap     I/O mapping (ioremap() and friends)
+ vmalloc     vmalloc() area
+ vmap        vmap()ed pages
+ user        VM_USERMAP area
+ vpages      buffer for pages pointers was vmalloced (huge area)
+ N<node>=nr  (Only on NUMA kernels)
+             Number of pages allocated on memory node <node>
+
+> cat /proc/vmallocinfo
+0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
+  /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
+0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
+  /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
+0xffffc20000302000-0xffffc20000304000    8192 acpi_tb_verify_table+0x21/0x4f...
+  phys=7fee8000 ioremap
+0xffffc20000304000-0xffffc20000307000   12288 acpi_tb_verify_table+0x21/0x4f...
+  phys=7fee7000 ioremap
+0xffffc2000031d000-0xffffc2000031f000    8192 init_vdso_vars+0x112/0x210
+0xffffc2000031f000-0xffffc2000032b000   49152 cramfs_uncompress_init+0x2e ...
+  /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
+0xffffc2000033a000-0xffffc2000033d000   12288 sys_swapon+0x640/0xac0      ...
+  pages=2 vmalloc N1=2
+0xffffc20000347000-0xffffc2000034c000   20480 xt_alloc_table_info+0xfe ...
+  /0x130 [x_tables] pages=4 vmalloc N0=4
+0xffffffffa0000000-0xffffffffa000f000   61440 sys_init_module+0xc27/0x1d00 ...
+   pages=14 vmalloc N2=14
+0xffffffffa000f000-0xffffffffa0014000   20480 sys_init_module+0xc27/0x1d00 ...
+   pages=4 vmalloc N1=4
+0xffffffffa0014000-0xffffffffa0017000   12288 sys_init_module+0xc27/0x1d00 ...
+   pages=2 vmalloc N1=2
+0xffffffffa0017000-0xffffffffa0022000   45056 sys_init_module+0xc27/0x1d00 ...
+   pages=10 vmalloc N0=10
 
 1.3 IDE devices in /proc/ide
 ----------------------------
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index b14f43d25e9..ded96986296 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -464,14 +464,25 @@ static const struct file_operations proc_slabstats_operations = {
 #ifdef CONFIG_MMU
 static int vmalloc_open(struct inode *inode, struct file *file)
 {
-	return seq_open(file, &vmalloc_op);
+	unsigned int *ptr = NULL;
+	int ret;
+
+	if (NUMA_BUILD)
+		ptr = kmalloc(nr_node_ids * sizeof(unsigned int), GFP_KERNEL);
+	ret = seq_open(file, &vmalloc_op);
+	if (!ret) {
+		struct seq_file *m = file->private_data;
+		m->private = ptr;
+	} else
+		kfree(ptr);
+	return ret;
 }
 
 static const struct file_operations proc_vmalloc_operations = {
 	.open		= vmalloc_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= seq_release_private,
 };
 #endif
 
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 6e45b0f3d12..35f29381629 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -931,6 +931,25 @@ static void s_stop(struct seq_file *m, void *p)
 	read_unlock(&vmlist_lock);
 }
 
+static void show_numa_info(struct seq_file *m, struct vm_struct *v)
+{
+	if (NUMA_BUILD) {
+		unsigned int nr, *counters = m->private;
+
+		if (!counters)
+			return;
+
+		memset(counters, 0, nr_node_ids * sizeof(unsigned int));
+
+		for (nr = 0; nr < v->nr_pages; nr++)
+			counters[page_to_nid(v->pages[nr])]++;
+
+		for_each_node_state(nr, N_HIGH_MEMORY)
+			if (counters[nr])
+				seq_printf(m, " N%u=%u", nr, counters[nr]);
+	}
+}
+
 static int s_show(struct seq_file *m, void *p)
 {
 	struct vm_struct *v = p;
@@ -967,6 +986,7 @@ static int s_show(struct seq_file *m, void *p)
 	if (v->flags & VM_VPAGES)
 		seq_printf(m, " vpages");
 
+	show_numa_info(m, v);
 	seq_putc(m, '\n');
 	return 0;
 }
-- 
cgit v1.2.3


From 5e9426abe209cf134adbbd62c5e73ef534eb73e9 Mon Sep 17 00:00:00 2001
From: Nishanth Aravamudan <nacc@us.ibm.com>
Date: Wed, 23 Jul 2008 21:27:39 -0700
Subject: mm: remove mm_init compilation dependency on CONFIG_DEBUG_MEMORY_INIT

Towards the end of putting all core mm initialization in mm_init.c, I
plan on putting the creation of a mm kobject in a function in that file.
However, the file is currently only compiled if CONFIG_DEBUG_MEMORY_INIT
is set. Remove this dependency, but put the code under an #ifdef on the
same config option. This should result in no functional changes.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/Makefile  | 3 +--
 mm/mm_init.c | 2 ++
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/mm/Makefile b/mm/Makefile
index 4bbc8f094ff..06ca2381fef 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -11,7 +11,7 @@ obj-y			:= bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
 			   maccess.o page_alloc.o page-writeback.o pdflush.o \
 			   readahead.o swap.o truncate.o vmscan.o \
 			   prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
-			   page_isolation.o $(mmu-y)
+			   page_isolation.o mm_init.o $(mmu-y)
 
 obj-$(CONFIG_PROC_PAGE_MONITOR) += pagewalk.o
 obj-$(CONFIG_BOUNCE)	+= bounce.o
@@ -26,7 +26,6 @@ obj-$(CONFIG_TMPFS_POSIX_ACL) += shmem_acl.o
 obj-$(CONFIG_TINY_SHMEM) += tiny-shmem.o
 obj-$(CONFIG_SLOB) += slob.o
 obj-$(CONFIG_SLAB) += slab.o
-obj-$(CONFIG_DEBUG_MEMORY_INIT) += mm_init.o
 obj-$(CONFIG_SLUB) += slub.o
 obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
 obj-$(CONFIG_FS_XIP) += filemap_xip.o
diff --git a/mm/mm_init.c b/mm/mm_init.c
index ce445ca097e..eaf0d3b4709 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -9,6 +9,7 @@
 #include <linux/init.h>
 #include "internal.h"
 
+#ifdef CONFIG_DEBUG_MEMORY_INIT
 int __meminitdata mminit_loglevel;
 
 /* The zonelists are simply reported, validation is manual. */
@@ -132,3 +133,4 @@ static __init int set_mminit_loglevel(char *str)
 	return 0;
 }
 early_param("mminit_loglevel", set_mminit_loglevel);
+#endif /* CONFIG_DEBUG_MEMORY_INIT */
-- 
cgit v1.2.3


From ff7ea79cf7c3a481851bd4b2185fdeb6ce4afa29 Mon Sep 17 00:00:00 2001
From: Nishanth Aravamudan <nacc@us.ibm.com>
Date: Wed, 23 Jul 2008 21:27:39 -0700
Subject: mm: create /sys/kernel/mm

Add a kobject to create /sys/kernel/mm when sysfs is mounted.  The kobject
will exist regardless.  This will allow for the hugepage related sysfs
directories to exist under the mm "subsystem" directory.  Add an ABI file
appropriately.

[kosaki.motohiro@jp.fujitsu.com: fix build]
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/ABI/testing/sysfs-kernel-mm |  6 ++++++
 include/linux/kobject.h                   |  2 ++
 mm/mm_init.c                              | 16 ++++++++++++++++
 3 files changed, 24 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-kernel-mm

diff --git a/Documentation/ABI/testing/sysfs-kernel-mm b/Documentation/ABI/testing/sysfs-kernel-mm
new file mode 100644
index 00000000000..190d523ac15
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-mm
@@ -0,0 +1,6 @@
+What:		/sys/kernel/mm
+Date:		July 2008
+Contact:	Nishanth Aravamudan <nacc@us.ibm.com>, VM maintainers
+Description:
+		/sys/kernel/mm/ should contain any and all VM
+		related information in /sys/kernel/.
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 60f0d418ae3..5437ac0276e 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -186,6 +186,8 @@ extern struct kobject *kset_find_obj(struct kset *, const char *);
 
 /* The global /sys/kernel/ kobject for people to chain off of */
 extern struct kobject *kernel_kobj;
+/* The global /sys/kernel/mm/ kobject for people to chain off of */
+extern struct kobject *mm_kobj;
 /* The global /sys/hypervisor/ kobject for people to chain off of */
 extern struct kobject *hypervisor_kobj;
 /* The global /sys/power/ kobject for people to chain off of */
diff --git a/mm/mm_init.c b/mm/mm_init.c
index eaf0d3b4709..c6af41ea999 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -7,6 +7,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
 #include "internal.h"
 
 #ifdef CONFIG_DEBUG_MEMORY_INIT
@@ -134,3 +136,17 @@ static __init int set_mminit_loglevel(char *str)
 }
 early_param("mminit_loglevel", set_mminit_loglevel);
 #endif /* CONFIG_DEBUG_MEMORY_INIT */
+
+struct kobject *mm_kobj;
+EXPORT_SYMBOL_GPL(mm_kobj);
+
+static int __init mm_sysfs_init(void)
+{
+	mm_kobj = kobject_create_and_add("mm", kernel_kobj);
+	if (!mm_kobj)
+		return -ENOMEM;
+
+	return 0;
+}
+
+__initcall(mm_sysfs_init);
-- 
cgit v1.2.3


From b7ba30c679ed1eb7ed3ed8f281f6493282042bd4 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:40 -0700
Subject: hugetlb: factor out prep_new_huge_page

Needed to avoid code duplication in follow up patches.

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index eda9642254a..32dff4290c6 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -513,6 +513,16 @@ static int adjust_pool_surplus(int delta)
 	return ret;
 }
 
+static void prep_new_huge_page(struct page *page, int nid)
+{
+	set_compound_page_dtor(page, free_huge_page);
+	spin_lock(&hugetlb_lock);
+	nr_huge_pages++;
+	nr_huge_pages_node[nid]++;
+	spin_unlock(&hugetlb_lock);
+	put_page(page); /* free it into the hugepage allocator */
+}
+
 static struct page *alloc_fresh_huge_page_node(int nid)
 {
 	struct page *page;
@@ -526,12 +536,7 @@ static struct page *alloc_fresh_huge_page_node(int nid)
 			__free_pages(page, HUGETLB_PAGE_ORDER);
 			return NULL;
 		}
-		set_compound_page_dtor(page, free_huge_page);
-		spin_lock(&hugetlb_lock);
-		nr_huge_pages++;
-		nr_huge_pages_node[nid]++;
-		spin_unlock(&hugetlb_lock);
-		put_page(page); /* free it into the hugepage allocator */
+		prep_new_huge_page(page, nid);
 	}
 
 	return page;
-- 
cgit v1.2.3


From a5516438959d90b071ff0a484ce4f3f523dc3152 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:41 -0700
Subject: hugetlb: modular state for hugetlb page size

The goal of this patchset is to support multiple hugetlb page sizes.  This
is achieved by introducing a new struct hstate structure, which
encapsulates the important hugetlb state and constants (eg.  huge page
size, number of huge pages currently allocated, etc).

The hstate structure is then passed around the code which requires these
fields, they will do the right thing regardless of the exact hstate they
are operating on.

This patch adds the hstate structure, with a single global instance of it
(default_hstate), and does the basic work of converting hugetlb to use the
hstate.

Future patches will add more hstate structures to allow for different
hugetlbfs mounts to have different page sizes.

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/mm/hugetlbpage.c    |   7 +-
 arch/powerpc/mm/hugetlbpage.c |   3 +-
 arch/s390/mm/hugetlbpage.c    |   3 +-
 arch/sh/mm/hugetlbpage.c      |   3 +-
 arch/sparc64/mm/hugetlbpage.c |   5 +-
 arch/x86/mm/hugetlbpage.c     |   5 +-
 fs/hugetlbfs/inode.c          |  52 +++---
 include/asm-ia64/hugetlb.h    |   3 +-
 include/asm-powerpc/hugetlb.h |   3 +-
 include/asm-s390/hugetlb.h    |   3 +-
 include/asm-sh/hugetlb.h      |   3 +-
 include/asm-sparc/hugetlb.h   |   3 +-
 include/asm-x86/hugetlb.h     |   8 +-
 include/linux/hugetlb.h       |  88 +++++++++-
 ipc/shm.c                     |   3 +-
 mm/hugetlb.c                  | 368 +++++++++++++++++++++++-------------------
 mm/memory.c                   |   2 +-
 mm/mempolicy.c                |   9 +-
 mm/mmap.c                     |   3 +-
 19 files changed, 356 insertions(+), 218 deletions(-)

diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index cd49e2860ee..6170f097d25 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -24,7 +24,7 @@
 unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
 
 pte_t *
-huge_pte_alloc (struct mm_struct *mm, unsigned long addr)
+huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
 	unsigned long taddr = htlbpage_to_page(addr);
 	pgd_t *pgd;
@@ -75,7 +75,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
  * Don't actually need to do any preparation, but need to make sure
  * the address is in the right region.
  */
-int prepare_hugepage_range(unsigned long addr, unsigned long len)
+int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
@@ -149,7 +150,7 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, u
 
 	/* Handle MAP_FIXED */
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 1a96cc891cf..c94dc71af98 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -128,7 +128,8 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	return NULL;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pg;
 	pud_t *pu;
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index f4b6124fdb7..9162dc84f77 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -72,7 +72,8 @@ void arch_release_hugepage(struct page *page)
 	page[1].index = 0;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index ae8c321d6e2..2f9dbe0ef4a 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -22,7 +22,8 @@
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c
index ebefd2a1437..1307b23f6a7 100644
--- a/arch/sparc64/mm/hugetlbpage.c
+++ b/arch/sparc64/mm/hugetlbpage.c
@@ -175,7 +175,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
@@ -195,7 +195,8 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 				pgoff, flags);
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 0b3d567e686..52476fde899 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -124,7 +124,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 1;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -368,7 +369,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 428eff5b73f..516c581b537 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -80,6 +80,7 @@ static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
 	struct inode *inode = file->f_path.dentry->d_inode;
 	loff_t len, vma_len;
 	int ret;
+	struct hstate *h = hstate_file(file);
 
 	/*
 	 * vma address alignment (but not the pgoff alignment) has
@@ -92,7 +93,7 @@ static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
 	vma->vm_flags |= VM_HUGETLB | VM_RESERVED;
 	vma->vm_ops = &hugetlb_vm_ops;
 
-	if (vma->vm_pgoff & ~(HPAGE_MASK >> PAGE_SHIFT))
+	if (vma->vm_pgoff & ~(huge_page_mask(h) >> PAGE_SHIFT))
 		return -EINVAL;
 
 	vma_len = (loff_t)(vma->vm_end - vma->vm_start);
@@ -104,8 +105,8 @@ static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
 	len = vma_len + ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
 
 	if (hugetlb_reserve_pages(inode,
-				vma->vm_pgoff >> (HPAGE_SHIFT-PAGE_SHIFT),
-				len >> HPAGE_SHIFT, vma))
+				vma->vm_pgoff >> huge_page_order(h),
+				len >> huge_page_shift(h), vma))
 		goto out;
 
 	ret = 0;
@@ -130,20 +131,21 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
+	struct hstate *h = hstate_file(file);
 
-	if (len & ~HPAGE_MASK)
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
 	if (len > TASK_SIZE)
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
 
 	if (addr) {
-		addr = ALIGN(addr, HPAGE_SIZE);
+		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
 		    (!vma || addr + len <= vma->vm_start))
@@ -156,7 +158,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		start_addr = TASK_UNMAPPED_BASE;
 
 full_search:
-	addr = ALIGN(start_addr, HPAGE_SIZE);
+	addr = ALIGN(start_addr, huge_page_size(h));
 
 	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
 		/* At this point:  (!vma || addr < vma->vm_end). */
@@ -174,7 +176,7 @@ full_search:
 
 		if (!vma || addr + len <= vma->vm_start)
 			return addr;
-		addr = ALIGN(vma->vm_end, HPAGE_SIZE);
+		addr = ALIGN(vma->vm_end, huge_page_size(h));
 	}
 }
 #endif
@@ -225,10 +227,11 @@ hugetlbfs_read_actor(struct page *page, unsigned long offset,
 static ssize_t hugetlbfs_read(struct file *filp, char __user *buf,
 			      size_t len, loff_t *ppos)
 {
+	struct hstate *h = hstate_file(filp);
 	struct address_space *mapping = filp->f_mapping;
 	struct inode *inode = mapping->host;
-	unsigned long index = *ppos >> HPAGE_SHIFT;
-	unsigned long offset = *ppos & ~HPAGE_MASK;
+	unsigned long index = *ppos >> huge_page_shift(h);
+	unsigned long offset = *ppos & ~huge_page_mask(h);
 	unsigned long end_index;
 	loff_t isize;
 	ssize_t retval = 0;
@@ -243,17 +246,17 @@ static ssize_t hugetlbfs_read(struct file *filp, char __user *buf,
 	if (!isize)
 		goto out;
 
-	end_index = (isize - 1) >> HPAGE_SHIFT;
+	end_index = (isize - 1) >> huge_page_shift(h);
 	for (;;) {
 		struct page *page;
-		int nr, ret;
+		unsigned long nr, ret;
 
 		/* nr is the maximum number of bytes to copy from this page */
-		nr = HPAGE_SIZE;
+		nr = huge_page_size(h);
 		if (index >= end_index) {
 			if (index > end_index)
 				goto out;
-			nr = ((isize - 1) & ~HPAGE_MASK) + 1;
+			nr = ((isize - 1) & ~huge_page_mask(h)) + 1;
 			if (nr <= offset) {
 				goto out;
 			}
@@ -287,8 +290,8 @@ static ssize_t hugetlbfs_read(struct file *filp, char __user *buf,
 		offset += ret;
 		retval += ret;
 		len -= ret;
-		index += offset >> HPAGE_SHIFT;
-		offset &= ~HPAGE_MASK;
+		index += offset >> huge_page_shift(h);
+		offset &= ~huge_page_mask(h);
 
 		if (page)
 			page_cache_release(page);
@@ -298,7 +301,7 @@ static ssize_t hugetlbfs_read(struct file *filp, char __user *buf,
 			break;
 	}
 out:
-	*ppos = ((loff_t)index << HPAGE_SHIFT) + offset;
+	*ppos = ((loff_t)index << huge_page_shift(h)) + offset;
 	mutex_unlock(&inode->i_mutex);
 	return retval;
 }
@@ -339,8 +342,9 @@ static void truncate_huge_page(struct page *page)
 
 static void truncate_hugepages(struct inode *inode, loff_t lstart)
 {
+	struct hstate *h = hstate_inode(inode);
 	struct address_space *mapping = &inode->i_data;
-	const pgoff_t start = lstart >> HPAGE_SHIFT;
+	const pgoff_t start = lstart >> huge_page_shift(h);
 	struct pagevec pvec;
 	pgoff_t next;
 	int i, freed = 0;
@@ -449,8 +453,9 @@ static int hugetlb_vmtruncate(struct inode *inode, loff_t offset)
 {
 	pgoff_t pgoff;
 	struct address_space *mapping = inode->i_mapping;
+	struct hstate *h = hstate_inode(inode);
 
-	BUG_ON(offset & ~HPAGE_MASK);
+	BUG_ON(offset & ~huge_page_mask(h));
 	pgoff = offset >> PAGE_SHIFT;
 
 	i_size_write(inode, offset);
@@ -465,6 +470,7 @@ static int hugetlb_vmtruncate(struct inode *inode, loff_t offset)
 static int hugetlbfs_setattr(struct dentry *dentry, struct iattr *attr)
 {
 	struct inode *inode = dentry->d_inode;
+	struct hstate *h = hstate_inode(inode);
 	int error;
 	unsigned int ia_valid = attr->ia_valid;
 
@@ -476,7 +482,7 @@ static int hugetlbfs_setattr(struct dentry *dentry, struct iattr *attr)
 
 	if (ia_valid & ATTR_SIZE) {
 		error = -EINVAL;
-		if (!(attr->ia_size & ~HPAGE_MASK))
+		if (!(attr->ia_size & ~huge_page_mask(h)))
 			error = hugetlb_vmtruncate(inode, attr->ia_size);
 		if (error)
 			goto out;
@@ -610,9 +616,10 @@ static int hugetlbfs_set_page_dirty(struct page *page)
 static int hugetlbfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(dentry->d_sb);
+	struct hstate *h = hstate_inode(dentry->d_inode);
 
 	buf->f_type = HUGETLBFS_MAGIC;
-	buf->f_bsize = HPAGE_SIZE;
+	buf->f_bsize = huge_page_size(h);
 	if (sbinfo) {
 		spin_lock(&sbinfo->stat_lock);
 		/* If no limits set, just report 0 for max/free/used
@@ -942,7 +949,8 @@ struct file *hugetlb_file_setup(const char *name, size_t size)
 		goto out_dentry;
 
 	error = -ENOMEM;
-	if (hugetlb_reserve_pages(inode, 0, size >> HPAGE_SHIFT, NULL))
+	if (hugetlb_reserve_pages(inode, 0,
+			size >> huge_page_shift(hstate_inode(inode)), NULL))
 		goto out_inode;
 
 	d_instantiate(dentry, inode);
diff --git a/include/asm-ia64/hugetlb.h b/include/asm-ia64/hugetlb.h
index e9d1e5e2382..da55c63728e 100644
--- a/include/asm-ia64/hugetlb.h
+++ b/include/asm-ia64/hugetlb.h
@@ -8,7 +8,8 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
 			    unsigned long end, unsigned long floor,
 			    unsigned long ceiling);
 
-int prepare_hugepage_range(unsigned long addr, unsigned long len);
+int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len);
 
 static inline int is_hugepage_only_range(struct mm_struct *mm,
 					 unsigned long addr,
diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h
index 0a37aa5ecaa..ca37c4af27b 100644
--- a/include/asm-powerpc/hugetlb.h
+++ b/include/asm-powerpc/hugetlb.h
@@ -21,7 +21,8 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
  * If the arch doesn't supply something else, assume that hugepage
  * size aligned regions are ok without further preparation.
  */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
diff --git a/include/asm-s390/hugetlb.h b/include/asm-s390/hugetlb.h
index 600a776f8f7..670a1d1745d 100644
--- a/include/asm-s390/hugetlb.h
+++ b/include/asm-s390/hugetlb.h
@@ -22,7 +22,8 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
  * If the arch doesn't supply something else, assume that hugepage
  * size aligned regions are ok without further preparation.
  */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
diff --git a/include/asm-sh/hugetlb.h b/include/asm-sh/hugetlb.h
index fb30018938c..967068fb79a 100644
--- a/include/asm-sh/hugetlb.h
+++ b/include/asm-sh/hugetlb.h
@@ -14,7 +14,8 @@ static inline int is_hugepage_only_range(struct mm_struct *mm,
  * If the arch doesn't supply something else, assume that hugepage
  * size aligned regions are ok without further preparation.
  */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
diff --git a/include/asm-sparc/hugetlb.h b/include/asm-sparc/hugetlb.h
index aeb92374ca3..177061064ee 100644
--- a/include/asm-sparc/hugetlb.h
+++ b/include/asm-sparc/hugetlb.h
@@ -22,7 +22,8 @@ static inline int is_hugepage_only_range(struct mm_struct *mm,
  * If the arch doesn't supply something else, assume that hugepage
  * size aligned regions are ok without further preparation.
  */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
diff --git a/include/asm-x86/hugetlb.h b/include/asm-x86/hugetlb.h
index 7eed6e0883b..439a9acc132 100644
--- a/include/asm-x86/hugetlb.h
+++ b/include/asm-x86/hugetlb.h
@@ -14,11 +14,13 @@ static inline int is_hugepage_only_range(struct mm_struct *mm,
  * If the arch doesn't supply something else, assume that hugepage
  * size aligned regions are ok without further preparation.
  */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
-	if (len & ~HPAGE_MASK)
+	struct hstate *h = hstate_file(file);
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
-	if (addr & ~HPAGE_MASK)
+	if (addr & ~huge_page_mask(h))
 		return -EINVAL;
 	return 0;
 }
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index abbc187193a..ad2271e11f9 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -8,7 +8,6 @@
 #include <linux/mempolicy.h>
 #include <linux/shm.h>
 #include <asm/tlbflush.h>
-#include <asm/hugetlb.h>
 
 struct ctl_table;
 
@@ -45,7 +44,8 @@ extern int sysctl_hugetlb_shm_group;
 
 /* arch callbacks */
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr);
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz);
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr);
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep);
 struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
@@ -80,7 +80,7 @@ static inline unsigned long hugetlb_total_pages(void)
 #define hugetlb_report_meminfo(buf)		0
 #define hugetlb_report_node_meminfo(n, buf)	0
 #define follow_huge_pmd(mm, addr, pmd, write)	NULL
-#define prepare_hugepage_range(addr,len)	(-EINVAL)
+#define prepare_hugepage_range(file, addr, len)	(-EINVAL)
 #define pmd_huge(x)	0
 #define is_hugepage_only_range(mm, addr, len)	0
 #define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; })
@@ -134,8 +134,6 @@ struct file *hugetlb_file_setup(const char *name, size_t);
 int hugetlb_get_quota(struct address_space *mapping, long delta);
 void hugetlb_put_quota(struct address_space *mapping, long delta);
 
-#define BLOCKS_PER_HUGEPAGE	(HPAGE_SIZE / 512)
-
 static inline int is_file_hugepages(struct file *file)
 {
 	if (file->f_op == &hugetlbfs_file_operations)
@@ -164,4 +162,84 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 					unsigned long flags);
 #endif /* HAVE_ARCH_HUGETLB_UNMAPPED_AREA */
 
+#ifdef CONFIG_HUGETLB_PAGE
+
+/* Defines one hugetlb page size */
+struct hstate {
+	int hugetlb_next_nid;
+	unsigned int order;
+	unsigned long mask;
+	unsigned long max_huge_pages;
+	unsigned long nr_huge_pages;
+	unsigned long free_huge_pages;
+	unsigned long resv_huge_pages;
+	unsigned long surplus_huge_pages;
+	unsigned long nr_overcommit_huge_pages;
+	struct list_head hugepage_freelists[MAX_NUMNODES];
+	unsigned int nr_huge_pages_node[MAX_NUMNODES];
+	unsigned int free_huge_pages_node[MAX_NUMNODES];
+	unsigned int surplus_huge_pages_node[MAX_NUMNODES];
+};
+
+extern struct hstate default_hstate;
+
+static inline struct hstate *hstate_vma(struct vm_area_struct *vma)
+{
+	return &default_hstate;
+}
+
+static inline struct hstate *hstate_file(struct file *f)
+{
+	return &default_hstate;
+}
+
+static inline struct hstate *hstate_inode(struct inode *i)
+{
+	return &default_hstate;
+}
+
+static inline unsigned long huge_page_size(struct hstate *h)
+{
+	return (unsigned long)PAGE_SIZE << h->order;
+}
+
+static inline unsigned long huge_page_mask(struct hstate *h)
+{
+	return h->mask;
+}
+
+static inline unsigned int huge_page_order(struct hstate *h)
+{
+	return h->order;
+}
+
+static inline unsigned huge_page_shift(struct hstate *h)
+{
+	return h->order + PAGE_SHIFT;
+}
+
+static inline unsigned int pages_per_huge_page(struct hstate *h)
+{
+	return 1 << h->order;
+}
+
+static inline unsigned int blocks_per_huge_page(struct hstate *h)
+{
+	return huge_page_size(h) / 512;
+}
+
+#include <asm/hugetlb.h>
+
+#else
+struct hstate {};
+#define hstate_file(f) NULL
+#define hstate_vma(v) NULL
+#define hstate_inode(i) NULL
+#define huge_page_size(h) PAGE_SIZE
+#define huge_page_mask(h) PAGE_MASK
+#define huge_page_order(h) 0
+#define huge_page_shift(h) PAGE_SHIFT
+#define pages_per_huge_page(h) 1
+#endif
+
 #endif /* _LINUX_HUGETLB_H */
diff --git a/ipc/shm.c b/ipc/shm.c
index 790240cd067..a726aebce7d 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -577,7 +577,8 @@ static void shm_get_stat(struct ipc_namespace *ns, unsigned long *rss,
 
 		if (is_file_hugepages(shp->shm_file)) {
 			struct address_space *mapping = inode->i_mapping;
-			*rss += (HPAGE_SIZE/PAGE_SIZE)*mapping->nrpages;
+			struct hstate *h = hstate_file(shp->shm_file);
+			*rss += pages_per_huge_page(h) * mapping->nrpages;
 		} else {
 			struct shmem_inode_info *info = SHMEM_I(inode);
 			spin_lock(&info->lock);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 32dff4290c6..0d8153e25f0 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -22,18 +22,12 @@
 #include "internal.h"
 
 const unsigned long hugetlb_zero = 0, hugetlb_infinity = ~0UL;
-static unsigned long nr_huge_pages, free_huge_pages, resv_huge_pages;
-static unsigned long surplus_huge_pages;
-static unsigned long nr_overcommit_huge_pages;
 unsigned long max_huge_pages;
 unsigned long sysctl_overcommit_huge_pages;
-static struct list_head hugepage_freelists[MAX_NUMNODES];
-static unsigned int nr_huge_pages_node[MAX_NUMNODES];
-static unsigned int free_huge_pages_node[MAX_NUMNODES];
-static unsigned int surplus_huge_pages_node[MAX_NUMNODES];
 static gfp_t htlb_alloc_mask = GFP_HIGHUSER;
 unsigned long hugepages_treat_as_movable;
-static int hugetlb_next_nid;
+
+struct hstate default_hstate;
 
 /*
  * Protects updates to hugepage_freelists, nr_huge_pages, and free_huge_pages
@@ -203,11 +197,11 @@ static long region_count(struct list_head *head, long f, long t)
  * Convert the address within this vma to the page offset within
  * the mapping, in pagecache page units; huge pages here.
  */
-static pgoff_t vma_hugecache_offset(struct vm_area_struct *vma,
-					unsigned long address)
+static pgoff_t vma_hugecache_offset(struct hstate *h,
+			struct vm_area_struct *vma, unsigned long address)
 {
-	return ((address - vma->vm_start) >> HPAGE_SHIFT) +
-			(vma->vm_pgoff >> (HPAGE_SHIFT - PAGE_SHIFT));
+	return ((address - vma->vm_start) >> huge_page_shift(h)) +
+			(vma->vm_pgoff >> huge_page_order(h));
 }
 
 /*
@@ -309,20 +303,21 @@ static int is_vma_resv_set(struct vm_area_struct *vma, unsigned long flag)
 }
 
 /* Decrement the reserved pages in the hugepage pool by one */
-static void decrement_hugepage_resv_vma(struct vm_area_struct *vma)
+static void decrement_hugepage_resv_vma(struct hstate *h,
+			struct vm_area_struct *vma)
 {
 	if (vma->vm_flags & VM_NORESERVE)
 		return;
 
 	if (vma->vm_flags & VM_SHARED) {
 		/* Shared mappings always use reserves */
-		resv_huge_pages--;
+		h->resv_huge_pages--;
 	} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
 		/*
 		 * Only the process that called mmap() has reserves for
 		 * private mappings.
 		 */
-		resv_huge_pages--;
+		h->resv_huge_pages--;
 	}
 }
 
@@ -344,12 +339,13 @@ static int vma_has_private_reserves(struct vm_area_struct *vma)
 	return 1;
 }
 
-static void clear_huge_page(struct page *page, unsigned long addr)
+static void clear_huge_page(struct page *page,
+			unsigned long addr, unsigned long sz)
 {
 	int i;
 
 	might_sleep();
-	for (i = 0; i < (HPAGE_SIZE/PAGE_SIZE); i++) {
+	for (i = 0; i < sz/PAGE_SIZE; i++) {
 		cond_resched();
 		clear_user_highpage(page + i, addr + i * PAGE_SIZE);
 	}
@@ -359,41 +355,43 @@ static void copy_huge_page(struct page *dst, struct page *src,
 			   unsigned long addr, struct vm_area_struct *vma)
 {
 	int i;
+	struct hstate *h = hstate_vma(vma);
 
 	might_sleep();
-	for (i = 0; i < HPAGE_SIZE/PAGE_SIZE; i++) {
+	for (i = 0; i < pages_per_huge_page(h); i++) {
 		cond_resched();
 		copy_user_highpage(dst + i, src + i, addr + i*PAGE_SIZE, vma);
 	}
 }
 
-static void enqueue_huge_page(struct page *page)
+static void enqueue_huge_page(struct hstate *h, struct page *page)
 {
 	int nid = page_to_nid(page);
-	list_add(&page->lru, &hugepage_freelists[nid]);
-	free_huge_pages++;
-	free_huge_pages_node[nid]++;
+	list_add(&page->lru, &h->hugepage_freelists[nid]);
+	h->free_huge_pages++;
+	h->free_huge_pages_node[nid]++;
 }
 
-static struct page *dequeue_huge_page(void)
+static struct page *dequeue_huge_page(struct hstate *h)
 {
 	int nid;
 	struct page *page = NULL;
 
 	for (nid = 0; nid < MAX_NUMNODES; ++nid) {
-		if (!list_empty(&hugepage_freelists[nid])) {
-			page = list_entry(hugepage_freelists[nid].next,
+		if (!list_empty(&h->hugepage_freelists[nid])) {
+			page = list_entry(h->hugepage_freelists[nid].next,
 					  struct page, lru);
 			list_del(&page->lru);
-			free_huge_pages--;
-			free_huge_pages_node[nid]--;
+			h->free_huge_pages--;
+			h->free_huge_pages_node[nid]--;
 			break;
 		}
 	}
 	return page;
 }
 
-static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
+static struct page *dequeue_huge_page_vma(struct hstate *h,
+				struct vm_area_struct *vma,
 				unsigned long address, int avoid_reserve)
 {
 	int nid;
@@ -411,26 +409,26 @@ static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
 	 * not "stolen". The child may still get SIGKILLed
 	 */
 	if (!vma_has_private_reserves(vma) &&
-			free_huge_pages - resv_huge_pages == 0)
+			h->free_huge_pages - h->resv_huge_pages == 0)
 		return NULL;
 
 	/* If reserves cannot be used, ensure enough pages are in the pool */
-	if (avoid_reserve && free_huge_pages - resv_huge_pages == 0)
+	if (avoid_reserve && h->free_huge_pages - h->resv_huge_pages == 0)
 		return NULL;
 
 	for_each_zone_zonelist_nodemask(zone, z, zonelist,
 						MAX_NR_ZONES - 1, nodemask) {
 		nid = zone_to_nid(zone);
 		if (cpuset_zone_allowed_softwall(zone, htlb_alloc_mask) &&
-		    !list_empty(&hugepage_freelists[nid])) {
-			page = list_entry(hugepage_freelists[nid].next,
+		    !list_empty(&h->hugepage_freelists[nid])) {
+			page = list_entry(h->hugepage_freelists[nid].next,
 					  struct page, lru);
 			list_del(&page->lru);
-			free_huge_pages--;
-			free_huge_pages_node[nid]--;
+			h->free_huge_pages--;
+			h->free_huge_pages_node[nid]--;
 
 			if (!avoid_reserve)
-				decrement_hugepage_resv_vma(vma);
+				decrement_hugepage_resv_vma(h, vma);
 
 			break;
 		}
@@ -439,12 +437,13 @@ static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
 	return page;
 }
 
-static void update_and_free_page(struct page *page)
+static void update_and_free_page(struct hstate *h, struct page *page)
 {
 	int i;
-	nr_huge_pages--;
-	nr_huge_pages_node[page_to_nid(page)]--;
-	for (i = 0; i < (HPAGE_SIZE / PAGE_SIZE); i++) {
+
+	h->nr_huge_pages--;
+	h->nr_huge_pages_node[page_to_nid(page)]--;
+	for (i = 0; i < pages_per_huge_page(h); i++) {
 		page[i].flags &= ~(1 << PG_locked | 1 << PG_error | 1 << PG_referenced |
 				1 << PG_dirty | 1 << PG_active | 1 << PG_reserved |
 				1 << PG_private | 1<< PG_writeback);
@@ -452,11 +451,16 @@ static void update_and_free_page(struct page *page)
 	set_compound_page_dtor(page, NULL);
 	set_page_refcounted(page);
 	arch_release_hugepage(page);
-	__free_pages(page, HUGETLB_PAGE_ORDER);
+	__free_pages(page, huge_page_order(h));
 }
 
 static void free_huge_page(struct page *page)
 {
+	/*
+	 * Can't pass hstate in here because it is called from the
+	 * compound page destructor.
+	 */
+	struct hstate *h = &default_hstate;
 	int nid = page_to_nid(page);
 	struct address_space *mapping;
 
@@ -466,12 +470,12 @@ static void free_huge_page(struct page *page)
 	INIT_LIST_HEAD(&page->lru);
 
 	spin_lock(&hugetlb_lock);
-	if (surplus_huge_pages_node[nid]) {
-		update_and_free_page(page);
-		surplus_huge_pages--;
-		surplus_huge_pages_node[nid]--;
+	if (h->surplus_huge_pages_node[nid]) {
+		update_and_free_page(h, page);
+		h->surplus_huge_pages--;
+		h->surplus_huge_pages_node[nid]--;
 	} else {
-		enqueue_huge_page(page);
+		enqueue_huge_page(h, page);
 	}
 	spin_unlock(&hugetlb_lock);
 	if (mapping)
@@ -483,7 +487,7 @@ static void free_huge_page(struct page *page)
  * balanced by operating on them in a round-robin fashion.
  * Returns 1 if an adjustment was made.
  */
-static int adjust_pool_surplus(int delta)
+static int adjust_pool_surplus(struct hstate *h, int delta)
 {
 	static int prev_nid;
 	int nid = prev_nid;
@@ -496,15 +500,15 @@ static int adjust_pool_surplus(int delta)
 			nid = first_node(node_online_map);
 
 		/* To shrink on this node, there must be a surplus page */
-		if (delta < 0 && !surplus_huge_pages_node[nid])
+		if (delta < 0 && !h->surplus_huge_pages_node[nid])
 			continue;
 		/* Surplus cannot exceed the total number of pages */
-		if (delta > 0 && surplus_huge_pages_node[nid] >=
-						nr_huge_pages_node[nid])
+		if (delta > 0 && h->surplus_huge_pages_node[nid] >=
+						h->nr_huge_pages_node[nid])
 			continue;
 
-		surplus_huge_pages += delta;
-		surplus_huge_pages_node[nid] += delta;
+		h->surplus_huge_pages += delta;
+		h->surplus_huge_pages_node[nid] += delta;
 		ret = 1;
 		break;
 	} while (nid != prev_nid);
@@ -513,46 +517,46 @@ static int adjust_pool_surplus(int delta)
 	return ret;
 }
 
-static void prep_new_huge_page(struct page *page, int nid)
+static void prep_new_huge_page(struct hstate *h, struct page *page, int nid)
 {
 	set_compound_page_dtor(page, free_huge_page);
 	spin_lock(&hugetlb_lock);
-	nr_huge_pages++;
-	nr_huge_pages_node[nid]++;
+	h->nr_huge_pages++;
+	h->nr_huge_pages_node[nid]++;
 	spin_unlock(&hugetlb_lock);
 	put_page(page); /* free it into the hugepage allocator */
 }
 
-static struct page *alloc_fresh_huge_page_node(int nid)
+static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
 {
 	struct page *page;
 
 	page = alloc_pages_node(nid,
 		htlb_alloc_mask|__GFP_COMP|__GFP_THISNODE|
 						__GFP_REPEAT|__GFP_NOWARN,
-		HUGETLB_PAGE_ORDER);
+		huge_page_order(h));
 	if (page) {
 		if (arch_prepare_hugepage(page)) {
 			__free_pages(page, HUGETLB_PAGE_ORDER);
 			return NULL;
 		}
-		prep_new_huge_page(page, nid);
+		prep_new_huge_page(h, page, nid);
 	}
 
 	return page;
 }
 
-static int alloc_fresh_huge_page(void)
+static int alloc_fresh_huge_page(struct hstate *h)
 {
 	struct page *page;
 	int start_nid;
 	int next_nid;
 	int ret = 0;
 
-	start_nid = hugetlb_next_nid;
+	start_nid = h->hugetlb_next_nid;
 
 	do {
-		page = alloc_fresh_huge_page_node(hugetlb_next_nid);
+		page = alloc_fresh_huge_page_node(h, h->hugetlb_next_nid);
 		if (page)
 			ret = 1;
 		/*
@@ -566,11 +570,11 @@ static int alloc_fresh_huge_page(void)
 		 * if we just successfully allocated a hugepage so that
 		 * the next caller gets hugepages on the next node.
 		 */
-		next_nid = next_node(hugetlb_next_nid, node_online_map);
+		next_nid = next_node(h->hugetlb_next_nid, node_online_map);
 		if (next_nid == MAX_NUMNODES)
 			next_nid = first_node(node_online_map);
-		hugetlb_next_nid = next_nid;
-	} while (!page && hugetlb_next_nid != start_nid);
+		h->hugetlb_next_nid = next_nid;
+	} while (!page && h->hugetlb_next_nid != start_nid);
 
 	if (ret)
 		count_vm_event(HTLB_BUDDY_PGALLOC);
@@ -580,8 +584,8 @@ static int alloc_fresh_huge_page(void)
 	return ret;
 }
 
-static struct page *alloc_buddy_huge_page(struct vm_area_struct *vma,
-						unsigned long address)
+static struct page *alloc_buddy_huge_page(struct hstate *h,
+			struct vm_area_struct *vma, unsigned long address)
 {
 	struct page *page;
 	unsigned int nid;
@@ -610,18 +614,18 @@ static struct page *alloc_buddy_huge_page(struct vm_area_struct *vma,
 	 * per-node value is checked there.
 	 */
 	spin_lock(&hugetlb_lock);
-	if (surplus_huge_pages >= nr_overcommit_huge_pages) {
+	if (h->surplus_huge_pages >= h->nr_overcommit_huge_pages) {
 		spin_unlock(&hugetlb_lock);
 		return NULL;
 	} else {
-		nr_huge_pages++;
-		surplus_huge_pages++;
+		h->nr_huge_pages++;
+		h->surplus_huge_pages++;
 	}
 	spin_unlock(&hugetlb_lock);
 
 	page = alloc_pages(htlb_alloc_mask|__GFP_COMP|
 					__GFP_REPEAT|__GFP_NOWARN,
-					HUGETLB_PAGE_ORDER);
+					huge_page_order(h));
 
 	spin_lock(&hugetlb_lock);
 	if (page) {
@@ -636,12 +640,12 @@ static struct page *alloc_buddy_huge_page(struct vm_area_struct *vma,
 		/*
 		 * We incremented the global counters already
 		 */
-		nr_huge_pages_node[nid]++;
-		surplus_huge_pages_node[nid]++;
+		h->nr_huge_pages_node[nid]++;
+		h->surplus_huge_pages_node[nid]++;
 		__count_vm_event(HTLB_BUDDY_PGALLOC);
 	} else {
-		nr_huge_pages--;
-		surplus_huge_pages--;
+		h->nr_huge_pages--;
+		h->surplus_huge_pages--;
 		__count_vm_event(HTLB_BUDDY_PGALLOC_FAIL);
 	}
 	spin_unlock(&hugetlb_lock);
@@ -653,16 +657,16 @@ static struct page *alloc_buddy_huge_page(struct vm_area_struct *vma,
  * Increase the hugetlb pool such that it can accomodate a reservation
  * of size 'delta'.
  */
-static int gather_surplus_pages(int delta)
+static int gather_surplus_pages(struct hstate *h, int delta)
 {
 	struct list_head surplus_list;
 	struct page *page, *tmp;
 	int ret, i;
 	int needed, allocated;
 
-	needed = (resv_huge_pages + delta) - free_huge_pages;
+	needed = (h->resv_huge_pages + delta) - h->free_huge_pages;
 	if (needed <= 0) {
-		resv_huge_pages += delta;
+		h->resv_huge_pages += delta;
 		return 0;
 	}
 
@@ -673,7 +677,7 @@ static int gather_surplus_pages(int delta)
 retry:
 	spin_unlock(&hugetlb_lock);
 	for (i = 0; i < needed; i++) {
-		page = alloc_buddy_huge_page(NULL, 0);
+		page = alloc_buddy_huge_page(h, NULL, 0);
 		if (!page) {
 			/*
 			 * We were not able to allocate enough pages to
@@ -694,7 +698,8 @@ retry:
 	 * because either resv_huge_pages or free_huge_pages may have changed.
 	 */
 	spin_lock(&hugetlb_lock);
-	needed = (resv_huge_pages + delta) - (free_huge_pages + allocated);
+	needed = (h->resv_huge_pages + delta) -
+			(h->free_huge_pages + allocated);
 	if (needed > 0)
 		goto retry;
 
@@ -707,7 +712,7 @@ retry:
 	 * before they are reserved.
 	 */
 	needed += allocated;
-	resv_huge_pages += delta;
+	h->resv_huge_pages += delta;
 	ret = 0;
 free:
 	/* Free the needed pages to the hugetlb pool */
@@ -715,7 +720,7 @@ free:
 		if ((--needed) < 0)
 			break;
 		list_del(&page->lru);
-		enqueue_huge_page(page);
+		enqueue_huge_page(h, page);
 	}
 
 	/* Free unnecessary surplus pages to the buddy allocator */
@@ -743,7 +748,8 @@ free:
  * allocated to satisfy the reservation must be explicitly freed if they were
  * never used.
  */
-static void return_unused_surplus_pages(unsigned long unused_resv_pages)
+static void return_unused_surplus_pages(struct hstate *h,
+					unsigned long unused_resv_pages)
 {
 	static int nid = -1;
 	struct page *page;
@@ -758,27 +764,27 @@ static void return_unused_surplus_pages(unsigned long unused_resv_pages)
 	unsigned long remaining_iterations = num_online_nodes();
 
 	/* Uncommit the reservation */
-	resv_huge_pages -= unused_resv_pages;
+	h->resv_huge_pages -= unused_resv_pages;
 
-	nr_pages = min(unused_resv_pages, surplus_huge_pages);
+	nr_pages = min(unused_resv_pages, h->surplus_huge_pages);
 
 	while (remaining_iterations-- && nr_pages) {
 		nid = next_node(nid, node_online_map);
 		if (nid == MAX_NUMNODES)
 			nid = first_node(node_online_map);
 
-		if (!surplus_huge_pages_node[nid])
+		if (!h->surplus_huge_pages_node[nid])
 			continue;
 
-		if (!list_empty(&hugepage_freelists[nid])) {
-			page = list_entry(hugepage_freelists[nid].next,
+		if (!list_empty(&h->hugepage_freelists[nid])) {
+			page = list_entry(h->hugepage_freelists[nid].next,
 					  struct page, lru);
 			list_del(&page->lru);
-			update_and_free_page(page);
-			free_huge_pages--;
-			free_huge_pages_node[nid]--;
-			surplus_huge_pages--;
-			surplus_huge_pages_node[nid]--;
+			update_and_free_page(h, page);
+			h->free_huge_pages--;
+			h->free_huge_pages_node[nid]--;
+			h->surplus_huge_pages--;
+			h->surplus_huge_pages_node[nid]--;
 			nr_pages--;
 			remaining_iterations = num_online_nodes();
 		}
@@ -794,13 +800,14 @@ static void return_unused_surplus_pages(unsigned long unused_resv_pages)
  * an instantiated the change should be committed via vma_commit_reservation.
  * No action is required on failure.
  */
-static int vma_needs_reservation(struct vm_area_struct *vma, unsigned long addr)
+static int vma_needs_reservation(struct hstate *h,
+			struct vm_area_struct *vma, unsigned long addr)
 {
 	struct address_space *mapping = vma->vm_file->f_mapping;
 	struct inode *inode = mapping->host;
 
 	if (vma->vm_flags & VM_SHARED) {
-		pgoff_t idx = vma_hugecache_offset(vma, addr);
+		pgoff_t idx = vma_hugecache_offset(h, vma, addr);
 		return region_chg(&inode->i_mapping->private_list,
 							idx, idx + 1);
 
@@ -809,7 +816,7 @@ static int vma_needs_reservation(struct vm_area_struct *vma, unsigned long addr)
 
 	} else  {
 		int err;
-		pgoff_t idx = vma_hugecache_offset(vma, addr);
+		pgoff_t idx = vma_hugecache_offset(h, vma, addr);
 		struct resv_map *reservations = vma_resv_map(vma);
 
 		err = region_chg(&reservations->regions, idx, idx + 1);
@@ -818,18 +825,18 @@ static int vma_needs_reservation(struct vm_area_struct *vma, unsigned long addr)
 		return 0;
 	}
 }
-static void vma_commit_reservation(struct vm_area_struct *vma,
-							unsigned long addr)
+static void vma_commit_reservation(struct hstate *h,
+			struct vm_area_struct *vma, unsigned long addr)
 {
 	struct address_space *mapping = vma->vm_file->f_mapping;
 	struct inode *inode = mapping->host;
 
 	if (vma->vm_flags & VM_SHARED) {
-		pgoff_t idx = vma_hugecache_offset(vma, addr);
+		pgoff_t idx = vma_hugecache_offset(h, vma, addr);
 		region_add(&inode->i_mapping->private_list, idx, idx + 1);
 
 	} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
-		pgoff_t idx = vma_hugecache_offset(vma, addr);
+		pgoff_t idx = vma_hugecache_offset(h, vma, addr);
 		struct resv_map *reservations = vma_resv_map(vma);
 
 		/* Mark this page used in the map. */
@@ -840,6 +847,7 @@ static void vma_commit_reservation(struct vm_area_struct *vma,
 static struct page *alloc_huge_page(struct vm_area_struct *vma,
 				    unsigned long addr, int avoid_reserve)
 {
+	struct hstate *h = hstate_vma(vma);
 	struct page *page;
 	struct address_space *mapping = vma->vm_file->f_mapping;
 	struct inode *inode = mapping->host;
@@ -852,7 +860,7 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
 	 * MAP_NORESERVE mappings may also need pages and quota allocated
 	 * if no reserve mapping overlaps.
 	 */
-	chg = vma_needs_reservation(vma, addr);
+	chg = vma_needs_reservation(h, vma, addr);
 	if (chg < 0)
 		return ERR_PTR(chg);
 	if (chg)
@@ -860,11 +868,11 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
 			return ERR_PTR(-ENOSPC);
 
 	spin_lock(&hugetlb_lock);
-	page = dequeue_huge_page_vma(vma, addr, avoid_reserve);
+	page = dequeue_huge_page_vma(h, vma, addr, avoid_reserve);
 	spin_unlock(&hugetlb_lock);
 
 	if (!page) {
-		page = alloc_buddy_huge_page(vma, addr);
+		page = alloc_buddy_huge_page(h, vma, addr);
 		if (!page) {
 			hugetlb_put_quota(inode->i_mapping, chg);
 			return ERR_PTR(-VM_FAULT_OOM);
@@ -874,7 +882,7 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
 	set_page_refcounted(page);
 	set_page_private(page, (unsigned long) mapping);
 
-	vma_commit_reservation(vma, addr);
+	vma_commit_reservation(h, vma, addr);
 
 	return page;
 }
@@ -882,21 +890,28 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
 static int __init hugetlb_init(void)
 {
 	unsigned long i;
+	struct hstate *h = &default_hstate;
 
 	if (HPAGE_SHIFT == 0)
 		return 0;
 
+	if (!h->order) {
+		h->order = HPAGE_SHIFT - PAGE_SHIFT;
+		h->mask = HPAGE_MASK;
+	}
+
 	for (i = 0; i < MAX_NUMNODES; ++i)
-		INIT_LIST_HEAD(&hugepage_freelists[i]);
+		INIT_LIST_HEAD(&h->hugepage_freelists[i]);
 
-	hugetlb_next_nid = first_node(node_online_map);
+	h->hugetlb_next_nid = first_node(node_online_map);
 
 	for (i = 0; i < max_huge_pages; ++i) {
-		if (!alloc_fresh_huge_page())
+		if (!alloc_fresh_huge_page(h))
 			break;
 	}
-	max_huge_pages = free_huge_pages = nr_huge_pages = i;
-	printk("Total HugeTLB memory allocated, %ld\n", free_huge_pages);
+	max_huge_pages = h->free_huge_pages = h->nr_huge_pages = i;
+	printk(KERN_INFO "Total HugeTLB memory allocated, %ld\n",
+			h->free_huge_pages);
 	return 0;
 }
 module_init(hugetlb_init);
@@ -922,34 +937,36 @@ static unsigned int cpuset_mems_nr(unsigned int *array)
 
 #ifdef CONFIG_SYSCTL
 #ifdef CONFIG_HIGHMEM
-static void try_to_free_low(unsigned long count)
+static void try_to_free_low(struct hstate *h, unsigned long count)
 {
 	int i;
 
 	for (i = 0; i < MAX_NUMNODES; ++i) {
 		struct page *page, *next;
-		list_for_each_entry_safe(page, next, &hugepage_freelists[i], lru) {
-			if (count >= nr_huge_pages)
+		struct list_head *freel = &h->hugepage_freelists[i];
+		list_for_each_entry_safe(page, next, freel, lru) {
+			if (count >= h->nr_huge_pages)
 				return;
 			if (PageHighMem(page))
 				continue;
 			list_del(&page->lru);
 			update_and_free_page(page);
-			free_huge_pages--;
-			free_huge_pages_node[page_to_nid(page)]--;
+			h->free_huge_pages--;
+			h->free_huge_pages_node[page_to_nid(page)]--;
 		}
 	}
 }
 #else
-static inline void try_to_free_low(unsigned long count)
+static inline void try_to_free_low(struct hstate *h, unsigned long count)
 {
 }
 #endif
 
-#define persistent_huge_pages (nr_huge_pages - surplus_huge_pages)
+#define persistent_huge_pages(h) (h->nr_huge_pages - h->surplus_huge_pages)
 static unsigned long set_max_huge_pages(unsigned long count)
 {
 	unsigned long min_count, ret;
+	struct hstate *h = &default_hstate;
 
 	/*
 	 * Increase the pool size
@@ -963,19 +980,19 @@ static unsigned long set_max_huge_pages(unsigned long count)
 	 * within all the constraints specified by the sysctls.
 	 */
 	spin_lock(&hugetlb_lock);
-	while (surplus_huge_pages && count > persistent_huge_pages) {
-		if (!adjust_pool_surplus(-1))
+	while (h->surplus_huge_pages && count > persistent_huge_pages(h)) {
+		if (!adjust_pool_surplus(h, -1))
 			break;
 	}
 
-	while (count > persistent_huge_pages) {
+	while (count > persistent_huge_pages(h)) {
 		/*
 		 * If this allocation races such that we no longer need the
 		 * page, free_huge_page will handle it by freeing the page
 		 * and reducing the surplus.
 		 */
 		spin_unlock(&hugetlb_lock);
-		ret = alloc_fresh_huge_page();
+		ret = alloc_fresh_huge_page(h);
 		spin_lock(&hugetlb_lock);
 		if (!ret)
 			goto out;
@@ -997,21 +1014,21 @@ static unsigned long set_max_huge_pages(unsigned long count)
 	 * and won't grow the pool anywhere else. Not until one of the
 	 * sysctls are changed, or the surplus pages go out of use.
 	 */
-	min_count = resv_huge_pages + nr_huge_pages - free_huge_pages;
+	min_count = h->resv_huge_pages + h->nr_huge_pages - h->free_huge_pages;
 	min_count = max(count, min_count);
-	try_to_free_low(min_count);
-	while (min_count < persistent_huge_pages) {
-		struct page *page = dequeue_huge_page();
+	try_to_free_low(h, min_count);
+	while (min_count < persistent_huge_pages(h)) {
+		struct page *page = dequeue_huge_page(h);
 		if (!page)
 			break;
-		update_and_free_page(page);
+		update_and_free_page(h, page);
 	}
-	while (count < persistent_huge_pages) {
-		if (!adjust_pool_surplus(1))
+	while (count < persistent_huge_pages(h)) {
+		if (!adjust_pool_surplus(h, 1))
 			break;
 	}
 out:
-	ret = persistent_huge_pages;
+	ret = persistent_huge_pages(h);
 	spin_unlock(&hugetlb_lock);
 	return ret;
 }
@@ -1041,9 +1058,10 @@ int hugetlb_overcommit_handler(struct ctl_table *table, int write,
 			struct file *file, void __user *buffer,
 			size_t *length, loff_t *ppos)
 {
+	struct hstate *h = &default_hstate;
 	proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
 	spin_lock(&hugetlb_lock);
-	nr_overcommit_huge_pages = sysctl_overcommit_huge_pages;
+	h->nr_overcommit_huge_pages = sysctl_overcommit_huge_pages;
 	spin_unlock(&hugetlb_lock);
 	return 0;
 }
@@ -1052,37 +1070,40 @@ int hugetlb_overcommit_handler(struct ctl_table *table, int write,
 
 int hugetlb_report_meminfo(char *buf)
 {
+	struct hstate *h = &default_hstate;
 	return sprintf(buf,
 			"HugePages_Total: %5lu\n"
 			"HugePages_Free:  %5lu\n"
 			"HugePages_Rsvd:  %5lu\n"
 			"HugePages_Surp:  %5lu\n"
 			"Hugepagesize:    %5lu kB\n",
-			nr_huge_pages,
-			free_huge_pages,
-			resv_huge_pages,
-			surplus_huge_pages,
-			HPAGE_SIZE/1024);
+			h->nr_huge_pages,
+			h->free_huge_pages,
+			h->resv_huge_pages,
+			h->surplus_huge_pages,
+			1UL << (huge_page_order(h) + PAGE_SHIFT - 10));
 }
 
 int hugetlb_report_node_meminfo(int nid, char *buf)
 {
+	struct hstate *h = &default_hstate;
 	return sprintf(buf,
 		"Node %d HugePages_Total: %5u\n"
 		"Node %d HugePages_Free:  %5u\n"
 		"Node %d HugePages_Surp:  %5u\n",
-		nid, nr_huge_pages_node[nid],
-		nid, free_huge_pages_node[nid],
-		nid, surplus_huge_pages_node[nid]);
+		nid, h->nr_huge_pages_node[nid],
+		nid, h->free_huge_pages_node[nid],
+		nid, h->surplus_huge_pages_node[nid]);
 }
 
 /* Return the number pages of memory we physically have, in PAGE_SIZE units. */
 unsigned long hugetlb_total_pages(void)
 {
-	return nr_huge_pages * (HPAGE_SIZE / PAGE_SIZE);
+	struct hstate *h = &default_hstate;
+	return h->nr_huge_pages * pages_per_huge_page(h);
 }
 
-static int hugetlb_acct_memory(long delta)
+static int hugetlb_acct_memory(struct hstate *h, long delta)
 {
 	int ret = -ENOMEM;
 
@@ -1105,18 +1126,18 @@ static int hugetlb_acct_memory(long delta)
 	 * semantics that cpuset has.
 	 */
 	if (delta > 0) {
-		if (gather_surplus_pages(delta) < 0)
+		if (gather_surplus_pages(h, delta) < 0)
 			goto out;
 
-		if (delta > cpuset_mems_nr(free_huge_pages_node)) {
-			return_unused_surplus_pages(delta);
+		if (delta > cpuset_mems_nr(h->free_huge_pages_node)) {
+			return_unused_surplus_pages(h, delta);
 			goto out;
 		}
 	}
 
 	ret = 0;
 	if (delta < 0)
-		return_unused_surplus_pages((unsigned long) -delta);
+		return_unused_surplus_pages(h, (unsigned long) -delta);
 
 out:
 	spin_unlock(&hugetlb_lock);
@@ -1141,14 +1162,15 @@ static void hugetlb_vm_op_open(struct vm_area_struct *vma)
 
 static void hugetlb_vm_op_close(struct vm_area_struct *vma)
 {
+	struct hstate *h = hstate_vma(vma);
 	struct resv_map *reservations = vma_resv_map(vma);
 	unsigned long reserve;
 	unsigned long start;
 	unsigned long end;
 
 	if (reservations) {
-		start = vma_hugecache_offset(vma, vma->vm_start);
-		end = vma_hugecache_offset(vma, vma->vm_end);
+		start = vma_hugecache_offset(h, vma, vma->vm_start);
+		end = vma_hugecache_offset(h, vma, vma->vm_end);
 
 		reserve = (end - start) -
 			region_count(&reservations->regions, start, end);
@@ -1156,7 +1178,7 @@ static void hugetlb_vm_op_close(struct vm_area_struct *vma)
 		kref_put(&reservations->refs, resv_map_release);
 
 		if (reserve)
-			hugetlb_acct_memory(-reserve);
+			hugetlb_acct_memory(h, -reserve);
 	}
 }
 
@@ -1214,14 +1236,16 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src,
 	struct page *ptepage;
 	unsigned long addr;
 	int cow;
+	struct hstate *h = hstate_vma(vma);
+	unsigned long sz = huge_page_size(h);
 
 	cow = (vma->vm_flags & (VM_SHARED | VM_MAYWRITE)) == VM_MAYWRITE;
 
-	for (addr = vma->vm_start; addr < vma->vm_end; addr += HPAGE_SIZE) {
+	for (addr = vma->vm_start; addr < vma->vm_end; addr += sz) {
 		src_pte = huge_pte_offset(src, addr);
 		if (!src_pte)
 			continue;
-		dst_pte = huge_pte_alloc(dst, addr);
+		dst_pte = huge_pte_alloc(dst, addr, sz);
 		if (!dst_pte)
 			goto nomem;
 
@@ -1257,6 +1281,9 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 	pte_t pte;
 	struct page *page;
 	struct page *tmp;
+	struct hstate *h = hstate_vma(vma);
+	unsigned long sz = huge_page_size(h);
+
 	/*
 	 * A page gathering list, protected by per file i_mmap_lock. The
 	 * lock is used to avoid list corruption from multiple unmapping
@@ -1265,11 +1292,11 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 	LIST_HEAD(page_list);
 
 	WARN_ON(!is_vm_hugetlb_page(vma));
-	BUG_ON(start & ~HPAGE_MASK);
-	BUG_ON(end & ~HPAGE_MASK);
+	BUG_ON(start & ~huge_page_mask(h));
+	BUG_ON(end & ~huge_page_mask(h));
 
 	spin_lock(&mm->page_table_lock);
-	for (address = start; address < end; address += HPAGE_SIZE) {
+	for (address = start; address < end; address += sz) {
 		ptep = huge_pte_offset(mm, address);
 		if (!ptep)
 			continue;
@@ -1383,6 +1410,7 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
 			unsigned long address, pte_t *ptep, pte_t pte,
 			struct page *pagecache_page)
 {
+	struct hstate *h = hstate_vma(vma);
 	struct page *old_page, *new_page;
 	int avoidcopy;
 	int outside_reserve = 0;
@@ -1443,7 +1471,7 @@ retry_avoidcopy:
 	__SetPageUptodate(new_page);
 	spin_lock(&mm->page_table_lock);
 
-	ptep = huge_pte_offset(mm, address & HPAGE_MASK);
+	ptep = huge_pte_offset(mm, address & huge_page_mask(h));
 	if (likely(pte_same(huge_ptep_get(ptep), pte))) {
 		/* Break COW */
 		huge_ptep_clear_flush(vma, address, ptep);
@@ -1458,14 +1486,14 @@ retry_avoidcopy:
 }
 
 /* Return the pagecache page at a given address within a VMA */
-static struct page *hugetlbfs_pagecache_page(struct vm_area_struct *vma,
-			unsigned long address)
+static struct page *hugetlbfs_pagecache_page(struct hstate *h,
+			struct vm_area_struct *vma, unsigned long address)
 {
 	struct address_space *mapping;
 	pgoff_t idx;
 
 	mapping = vma->vm_file->f_mapping;
-	idx = vma_hugecache_offset(vma, address);
+	idx = vma_hugecache_offset(h, vma, address);
 
 	return find_lock_page(mapping, idx);
 }
@@ -1473,6 +1501,7 @@ static struct page *hugetlbfs_pagecache_page(struct vm_area_struct *vma,
 static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			unsigned long address, pte_t *ptep, int write_access)
 {
+	struct hstate *h = hstate_vma(vma);
 	int ret = VM_FAULT_SIGBUS;
 	pgoff_t idx;
 	unsigned long size;
@@ -1493,7 +1522,7 @@ static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	}
 
 	mapping = vma->vm_file->f_mapping;
-	idx = vma_hugecache_offset(vma, address);
+	idx = vma_hugecache_offset(h, vma, address);
 
 	/*
 	 * Use page lock to guard against racing truncation
@@ -1502,7 +1531,7 @@ static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
 retry:
 	page = find_lock_page(mapping, idx);
 	if (!page) {
-		size = i_size_read(mapping->host) >> HPAGE_SHIFT;
+		size = i_size_read(mapping->host) >> huge_page_shift(h);
 		if (idx >= size)
 			goto out;
 		page = alloc_huge_page(vma, address, 0);
@@ -1510,7 +1539,7 @@ retry:
 			ret = -PTR_ERR(page);
 			goto out;
 		}
-		clear_huge_page(page, address);
+		clear_huge_page(page, address, huge_page_size(h));
 		__SetPageUptodate(page);
 
 		if (vma->vm_flags & VM_SHARED) {
@@ -1526,14 +1555,14 @@ retry:
 			}
 
 			spin_lock(&inode->i_lock);
-			inode->i_blocks += BLOCKS_PER_HUGEPAGE;
+			inode->i_blocks += blocks_per_huge_page(h);
 			spin_unlock(&inode->i_lock);
 		} else
 			lock_page(page);
 	}
 
 	spin_lock(&mm->page_table_lock);
-	size = i_size_read(mapping->host) >> HPAGE_SHIFT;
+	size = i_size_read(mapping->host) >> huge_page_shift(h);
 	if (idx >= size)
 		goto backout;
 
@@ -1569,8 +1598,9 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	pte_t entry;
 	int ret;
 	static DEFINE_MUTEX(hugetlb_instantiation_mutex);
+	struct hstate *h = hstate_vma(vma);
 
-	ptep = huge_pte_alloc(mm, address);
+	ptep = huge_pte_alloc(mm, address, huge_page_size(h));
 	if (!ptep)
 		return VM_FAULT_OOM;
 
@@ -1594,7 +1624,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	if (likely(pte_same(entry, huge_ptep_get(ptep))))
 		if (write_access && !pte_write(entry)) {
 			struct page *page;
-			page = hugetlbfs_pagecache_page(vma, address);
+			page = hugetlbfs_pagecache_page(h, vma, address);
 			ret = hugetlb_cow(mm, vma, address, ptep, entry, page);
 			if (page) {
 				unlock_page(page);
@@ -1615,6 +1645,7 @@ int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	unsigned long pfn_offset;
 	unsigned long vaddr = *position;
 	int remainder = *length;
+	struct hstate *h = hstate_vma(vma);
 
 	spin_lock(&mm->page_table_lock);
 	while (vaddr < vma->vm_end && remainder) {
@@ -1626,7 +1657,7 @@ int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
 		 * each hugepage.  We have to make * sure we get the
 		 * first, for the page indexing below to work.
 		 */
-		pte = huge_pte_offset(mm, vaddr & HPAGE_MASK);
+		pte = huge_pte_offset(mm, vaddr & huge_page_mask(h));
 
 		if (!pte || huge_pte_none(huge_ptep_get(pte)) ||
 		    (write && !pte_write(huge_ptep_get(pte)))) {
@@ -1644,7 +1675,7 @@ int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			break;
 		}
 
-		pfn_offset = (vaddr & ~HPAGE_MASK) >> PAGE_SHIFT;
+		pfn_offset = (vaddr & ~huge_page_mask(h)) >> PAGE_SHIFT;
 		page = pte_page(huge_ptep_get(pte));
 same_page:
 		if (pages) {
@@ -1660,7 +1691,7 @@ same_page:
 		--remainder;
 		++i;
 		if (vaddr < vma->vm_end && remainder &&
-				pfn_offset < HPAGE_SIZE/PAGE_SIZE) {
+				pfn_offset < pages_per_huge_page(h)) {
 			/*
 			 * We use pfn_offset to avoid touching the pageframes
 			 * of this compound page.
@@ -1682,13 +1713,14 @@ void hugetlb_change_protection(struct vm_area_struct *vma,
 	unsigned long start = address;
 	pte_t *ptep;
 	pte_t pte;
+	struct hstate *h = hstate_vma(vma);
 
 	BUG_ON(address >= end);
 	flush_cache_range(vma, address, end);
 
 	spin_lock(&vma->vm_file->f_mapping->i_mmap_lock);
 	spin_lock(&mm->page_table_lock);
-	for (; address < end; address += HPAGE_SIZE) {
+	for (; address < end; address += huge_page_size(h)) {
 		ptep = huge_pte_offset(mm, address);
 		if (!ptep)
 			continue;
@@ -1711,6 +1743,7 @@ int hugetlb_reserve_pages(struct inode *inode,
 					struct vm_area_struct *vma)
 {
 	long ret, chg;
+	struct hstate *h = hstate_inode(inode);
 
 	if (vma && vma->vm_flags & VM_NORESERVE)
 		return 0;
@@ -1739,7 +1772,7 @@ int hugetlb_reserve_pages(struct inode *inode,
 
 	if (hugetlb_get_quota(inode->i_mapping, chg))
 		return -ENOSPC;
-	ret = hugetlb_acct_memory(chg);
+	ret = hugetlb_acct_memory(h, chg);
 	if (ret < 0) {
 		hugetlb_put_quota(inode->i_mapping, chg);
 		return ret;
@@ -1751,12 +1784,13 @@ int hugetlb_reserve_pages(struct inode *inode,
 
 void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed)
 {
+	struct hstate *h = hstate_inode(inode);
 	long chg = region_truncate(&inode->i_mapping->private_list, offset);
 
 	spin_lock(&inode->i_lock);
-	inode->i_blocks -= BLOCKS_PER_HUGEPAGE * freed;
+	inode->i_blocks -= blocks_per_huge_page(h);
 	spin_unlock(&inode->i_lock);
 
 	hugetlb_put_quota(inode->i_mapping, (chg - freed));
-	hugetlb_acct_memory(-(chg - freed));
+	hugetlb_acct_memory(h, -(chg - freed));
 }
diff --git a/mm/memory.c b/mm/memory.c
index 72932489a08..c1c1d6d8c22 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -903,7 +903,7 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp,
 			if (unlikely(is_vm_hugetlb_page(vma))) {
 				unmap_hugepage_range(vma, start, end, NULL);
 				zap_work -= (end - start) /
-						(HPAGE_SIZE / PAGE_SIZE);
+					pages_per_huge_page(hstate_vma(vma));
 				start = end;
 			} else
 				start = unmap_page_range(*tlbp, vma,
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index c94e58b192c..e550bec2058 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1481,7 +1481,7 @@ struct zonelist *huge_zonelist(struct vm_area_struct *vma, unsigned long addr,
 
 	if (unlikely((*mpol)->mode == MPOL_INTERLEAVE)) {
 		zl = node_zonelist(interleave_nid(*mpol, vma, addr,
-						HPAGE_SHIFT), gfp_flags);
+				huge_page_shift(hstate_vma(vma))), gfp_flags);
 	} else {
 		zl = policy_zonelist(gfp_flags, *mpol);
 		if ((*mpol)->mode == MPOL_BIND)
@@ -2220,9 +2220,12 @@ static void check_huge_range(struct vm_area_struct *vma,
 {
 	unsigned long addr;
 	struct page *page;
+	struct hstate *h = hstate_vma(vma);
+	unsigned long sz = huge_page_size(h);
 
-	for (addr = start; addr < end; addr += HPAGE_SIZE) {
-		pte_t *ptep = huge_pte_offset(vma->vm_mm, addr & HPAGE_MASK);
+	for (addr = start; addr < end; addr += sz) {
+		pte_t *ptep = huge_pte_offset(vma->vm_mm,
+						addr & huge_page_mask(h));
 		pte_t pte;
 
 		if (!ptep)
diff --git a/mm/mmap.c b/mm/mmap.c
index 57d3b6097de..5e0cc99e9cd 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1812,7 +1812,8 @@ int split_vma(struct mm_struct * mm, struct vm_area_struct * vma,
 	struct mempolicy *pol;
 	struct vm_area_struct *new;
 
-	if (is_vm_hugetlb_page(vma) && (addr & ~HPAGE_MASK))
+	if (is_vm_hugetlb_page(vma) && (addr &
+					~(huge_page_mask(hstate_vma(vma)))))
 		return -EINVAL;
 
 	if (mm->map_count >= sysctl_max_map_count)
-- 
cgit v1.2.3


From e5ff215941d59f8ae6bf58f6428dc5c26745a612 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:42 -0700
Subject: hugetlb: multiple hstates for multiple page sizes

Add basic support for more than one hstate in hugetlbfs.  This is the key
to supporting multiple hugetlbfs page sizes at once.

- Rather than a single hstate, we now have an array, with an iterator
- default_hstate continues to be the struct hstate which we use by default
- Add functions for architectures to register new hstates

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/hugetlb.h |  19 ++++++-
 kernel/sysctl.c         |   8 ++-
 mm/hugetlb.c            | 148 +++++++++++++++++++++++++++++++++++++++---------
 3 files changed, 142 insertions(+), 33 deletions(-)

diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index ad2271e11f9..b75bdb4deba 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -36,8 +36,6 @@ int hugetlb_reserve_pages(struct inode *inode, long from, long to,
 						struct vm_area_struct *vma);
 void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed);
 
-extern unsigned long max_huge_pages;
-extern unsigned long sysctl_overcommit_huge_pages;
 extern unsigned long hugepages_treat_as_movable;
 extern const unsigned long hugetlb_zero, hugetlb_infinity;
 extern int sysctl_hugetlb_shm_group;
@@ -181,7 +179,17 @@ struct hstate {
 	unsigned int surplus_huge_pages_node[MAX_NUMNODES];
 };
 
-extern struct hstate default_hstate;
+void __init hugetlb_add_hstate(unsigned order);
+struct hstate *size_to_hstate(unsigned long size);
+
+#ifndef HUGE_MAX_HSTATE
+#define HUGE_MAX_HSTATE 1
+#endif
+
+extern struct hstate hstates[HUGE_MAX_HSTATE];
+extern unsigned int default_hstate_idx;
+
+#define default_hstate (hstates[default_hstate_idx])
 
 static inline struct hstate *hstate_vma(struct vm_area_struct *vma)
 {
@@ -230,6 +238,11 @@ static inline unsigned int blocks_per_huge_page(struct hstate *h)
 
 #include <asm/hugetlb.h>
 
+static inline struct hstate *page_hstate(struct page *page)
+{
+	return size_to_hstate(PAGE_SIZE << compound_order(page));
+}
+
 #else
 struct hstate {};
 #define hstate_file(f) NULL
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 1f7b3b76a16..1a8299d1fe5 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -959,7 +959,7 @@ static struct ctl_table vm_table[] = {
 #ifdef CONFIG_HUGETLB_PAGE
 	 {
 		.procname	= "nr_hugepages",
-		.data		= &max_huge_pages,
+		.data		= NULL,
 		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
 		.proc_handler	= &hugetlb_sysctl_handler,
@@ -985,10 +985,12 @@ static struct ctl_table vm_table[] = {
 	{
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nr_overcommit_hugepages",
-		.data		= &sysctl_overcommit_huge_pages,
-		.maxlen		= sizeof(sysctl_overcommit_huge_pages),
+		.data		= NULL,
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
 		.proc_handler	= &hugetlb_overcommit_handler,
+		.extra1		= (void *)&hugetlb_zero,
+		.extra2		= (void *)&hugetlb_infinity,
 	},
 #endif
 	{
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 0d8153e25f0..82378d44a0c 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -22,12 +22,19 @@
 #include "internal.h"
 
 const unsigned long hugetlb_zero = 0, hugetlb_infinity = ~0UL;
-unsigned long max_huge_pages;
-unsigned long sysctl_overcommit_huge_pages;
 static gfp_t htlb_alloc_mask = GFP_HIGHUSER;
 unsigned long hugepages_treat_as_movable;
 
-struct hstate default_hstate;
+static int max_hstate;
+unsigned int default_hstate_idx;
+struct hstate hstates[HUGE_MAX_HSTATE];
+
+/* for command line parsing */
+static struct hstate * __initdata parsed_hstate;
+static unsigned long __initdata default_hstate_max_huge_pages;
+
+#define for_each_hstate(h) \
+	for ((h) = hstates; (h) < &hstates[max_hstate]; (h)++)
 
 /*
  * Protects updates to hugepage_freelists, nr_huge_pages, and free_huge_pages
@@ -454,13 +461,24 @@ static void update_and_free_page(struct hstate *h, struct page *page)
 	__free_pages(page, huge_page_order(h));
 }
 
+struct hstate *size_to_hstate(unsigned long size)
+{
+	struct hstate *h;
+
+	for_each_hstate(h) {
+		if (huge_page_size(h) == size)
+			return h;
+	}
+	return NULL;
+}
+
 static void free_huge_page(struct page *page)
 {
 	/*
 	 * Can't pass hstate in here because it is called from the
 	 * compound page destructor.
 	 */
-	struct hstate *h = &default_hstate;
+	struct hstate *h = page_hstate(page);
 	int nid = page_to_nid(page);
 	struct address_space *mapping;
 
@@ -887,39 +905,94 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
 	return page;
 }
 
-static int __init hugetlb_init(void)
+static void __init hugetlb_init_one_hstate(struct hstate *h)
 {
 	unsigned long i;
-	struct hstate *h = &default_hstate;
-
-	if (HPAGE_SHIFT == 0)
-		return 0;
-
-	if (!h->order) {
-		h->order = HPAGE_SHIFT - PAGE_SHIFT;
-		h->mask = HPAGE_MASK;
-	}
 
 	for (i = 0; i < MAX_NUMNODES; ++i)
 		INIT_LIST_HEAD(&h->hugepage_freelists[i]);
 
 	h->hugetlb_next_nid = first_node(node_online_map);
 
-	for (i = 0; i < max_huge_pages; ++i) {
+	for (i = 0; i < h->max_huge_pages; ++i) {
 		if (!alloc_fresh_huge_page(h))
 			break;
 	}
-	max_huge_pages = h->free_huge_pages = h->nr_huge_pages = i;
-	printk(KERN_INFO "Total HugeTLB memory allocated, %ld\n",
-			h->free_huge_pages);
+	h->max_huge_pages = h->free_huge_pages = h->nr_huge_pages = i;
+}
+
+static void __init hugetlb_init_hstates(void)
+{
+	struct hstate *h;
+
+	for_each_hstate(h) {
+		hugetlb_init_one_hstate(h);
+	}
+}
+
+static void __init report_hugepages(void)
+{
+	struct hstate *h;
+
+	for_each_hstate(h) {
+		printk(KERN_INFO "Total HugeTLB memory allocated, "
+				"%ld %dMB pages\n",
+				h->free_huge_pages,
+				1 << (h->order + PAGE_SHIFT - 20));
+	}
+}
+
+static int __init hugetlb_init(void)
+{
+	BUILD_BUG_ON(HPAGE_SHIFT == 0);
+
+	if (!size_to_hstate(HPAGE_SIZE)) {
+		hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
+		parsed_hstate->max_huge_pages = default_hstate_max_huge_pages;
+	}
+	default_hstate_idx = size_to_hstate(HPAGE_SIZE) - hstates;
+
+	hugetlb_init_hstates();
+
+	report_hugepages();
+
 	return 0;
 }
 module_init(hugetlb_init);
 
+/* Should be called on processing a hugepagesz=... option */
+void __init hugetlb_add_hstate(unsigned order)
+{
+	struct hstate *h;
+	if (size_to_hstate(PAGE_SIZE << order)) {
+		printk(KERN_WARNING "hugepagesz= specified twice, ignoring\n");
+		return;
+	}
+	BUG_ON(max_hstate >= HUGE_MAX_HSTATE);
+	BUG_ON(order == 0);
+	h = &hstates[max_hstate++];
+	h->order = order;
+	h->mask = ~((1ULL << (order + PAGE_SHIFT)) - 1);
+	hugetlb_init_one_hstate(h);
+	parsed_hstate = h;
+}
+
 static int __init hugetlb_setup(char *s)
 {
-	if (sscanf(s, "%lu", &max_huge_pages) <= 0)
-		max_huge_pages = 0;
+	unsigned long *mhp;
+
+	/*
+	 * !max_hstate means we haven't parsed a hugepagesz= parameter yet,
+	 * so this hugepages= parameter goes to the "default hstate".
+	 */
+	if (!max_hstate)
+		mhp = &default_hstate_max_huge_pages;
+	else
+		mhp = &parsed_hstate->max_huge_pages;
+
+	if (sscanf(s, "%lu", mhp) <= 0)
+		*mhp = 0;
+
 	return 1;
 }
 __setup("hugepages=", hugetlb_setup);
@@ -950,7 +1023,7 @@ static void try_to_free_low(struct hstate *h, unsigned long count)
 			if (PageHighMem(page))
 				continue;
 			list_del(&page->lru);
-			update_and_free_page(page);
+			update_and_free_page(h, page);
 			h->free_huge_pages--;
 			h->free_huge_pages_node[page_to_nid(page)]--;
 		}
@@ -963,10 +1036,9 @@ static inline void try_to_free_low(struct hstate *h, unsigned long count)
 #endif
 
 #define persistent_huge_pages(h) (h->nr_huge_pages - h->surplus_huge_pages)
-static unsigned long set_max_huge_pages(unsigned long count)
+static unsigned long set_max_huge_pages(struct hstate *h, unsigned long count)
 {
 	unsigned long min_count, ret;
-	struct hstate *h = &default_hstate;
 
 	/*
 	 * Increase the pool size
@@ -1037,8 +1109,19 @@ int hugetlb_sysctl_handler(struct ctl_table *table, int write,
 			   struct file *file, void __user *buffer,
 			   size_t *length, loff_t *ppos)
 {
+	struct hstate *h = &default_hstate;
+	unsigned long tmp;
+
+	if (!write)
+		tmp = h->max_huge_pages;
+
+	table->data = &tmp;
+	table->maxlen = sizeof(unsigned long);
 	proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
-	max_huge_pages = set_max_huge_pages(max_huge_pages);
+
+	if (write)
+		h->max_huge_pages = set_max_huge_pages(h, tmp);
+
 	return 0;
 }
 
@@ -1059,10 +1142,21 @@ int hugetlb_overcommit_handler(struct ctl_table *table, int write,
 			size_t *length, loff_t *ppos)
 {
 	struct hstate *h = &default_hstate;
+	unsigned long tmp;
+
+	if (!write)
+		tmp = h->nr_overcommit_huge_pages;
+
+	table->data = &tmp;
+	table->maxlen = sizeof(unsigned long);
 	proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
-	spin_lock(&hugetlb_lock);
-	h->nr_overcommit_huge_pages = sysctl_overcommit_huge_pages;
-	spin_unlock(&hugetlb_lock);
+
+	if (write) {
+		spin_lock(&hugetlb_lock);
+		h->nr_overcommit_huge_pages = tmp;
+		spin_unlock(&hugetlb_lock);
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From a137e1cc6d6e7d315fef03962a2a5a113348b13b Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:43 -0700
Subject: hugetlbfs: per mount huge page sizes

Add the ability to configure the hugetlb hstate used on a per mount basis.

- Add a new pagesize= option to the hugetlbfs mount that allows setting
  the page size
- This option causes the mount code to find the hstate corresponding to the
  specified size, and sets up a pointer to the hstate in the mount's
  superblock.
- Change the hstate accessors to use this information rather than the
  global_hstate they were using (requires a slight change in mm/memory.c
  so we don't NULL deref in the error-unmap path -- see comments).

[np: take hstate out of hugetlbfs inode and vma->vm_private_data]

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hugetlbfs/inode.c    | 45 ++++++++++++++++++++++++++++++++++++---------
 include/linux/hugetlb.h | 14 +++++++++-----
 mm/hugetlb.c            | 16 +++-------------
 mm/memory.c             | 18 ++++++++++++++++--
 4 files changed, 64 insertions(+), 29 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 516c581b537..dbd01d262ca 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -53,6 +53,7 @@ int sysctl_hugetlb_shm_group;
 enum {
 	Opt_size, Opt_nr_inodes,
 	Opt_mode, Opt_uid, Opt_gid,
+	Opt_pagesize,
 	Opt_err,
 };
 
@@ -62,6 +63,7 @@ static match_table_t tokens = {
 	{Opt_mode,	"mode=%o"},
 	{Opt_uid,	"uid=%u"},
 	{Opt_gid,	"gid=%u"},
+	{Opt_pagesize,	"pagesize=%s"},
 	{Opt_err,	NULL},
 };
 
@@ -750,6 +752,8 @@ hugetlbfs_parse_options(char *options, struct hugetlbfs_config *pconfig)
 	char *p, *rest;
 	substring_t args[MAX_OPT_ARGS];
 	int option;
+	unsigned long long size = 0;
+	enum { NO_SIZE, SIZE_STD, SIZE_PERCENT } setsize = NO_SIZE;
 
 	if (!options)
 		return 0;
@@ -780,17 +784,13 @@ hugetlbfs_parse_options(char *options, struct hugetlbfs_config *pconfig)
 			break;
 
 		case Opt_size: {
- 			unsigned long long size;
 			/* memparse() will accept a K/M/G without a digit */
 			if (!isdigit(*args[0].from))
 				goto bad_val;
 			size = memparse(args[0].from, &rest);
-			if (*rest == '%') {
-				size <<= HPAGE_SHIFT;
-				size *= max_huge_pages;
-				do_div(size, 100);
-			}
-			pconfig->nr_blocks = (size >> HPAGE_SHIFT);
+			setsize = SIZE_STD;
+			if (*rest == '%')
+				setsize = SIZE_PERCENT;
 			break;
 		}
 
@@ -801,6 +801,19 @@ hugetlbfs_parse_options(char *options, struct hugetlbfs_config *pconfig)
 			pconfig->nr_inodes = memparse(args[0].from, &rest);
 			break;
 
+		case Opt_pagesize: {
+			unsigned long ps;
+			ps = memparse(args[0].from, &rest);
+			pconfig->hstate = size_to_hstate(ps);
+			if (!pconfig->hstate) {
+				printk(KERN_ERR
+				"hugetlbfs: Unsupported page size %lu MB\n",
+					ps >> 20);
+				return -EINVAL;
+			}
+			break;
+		}
+
 		default:
 			printk(KERN_ERR "hugetlbfs: Bad mount option: \"%s\"\n",
 				 p);
@@ -808,6 +821,18 @@ hugetlbfs_parse_options(char *options, struct hugetlbfs_config *pconfig)
 			break;
 		}
 	}
+
+	/* Do size after hstate is set up */
+	if (setsize > NO_SIZE) {
+		struct hstate *h = pconfig->hstate;
+		if (setsize == SIZE_PERCENT) {
+			size <<= huge_page_shift(h);
+			size *= h->max_huge_pages;
+			do_div(size, 100);
+		}
+		pconfig->nr_blocks = (size >> huge_page_shift(h));
+	}
+
 	return 0;
 
 bad_val:
@@ -832,6 +857,7 @@ hugetlbfs_fill_super(struct super_block *sb, void *data, int silent)
 	config.uid = current->fsuid;
 	config.gid = current->fsgid;
 	config.mode = 0755;
+	config.hstate = &default_hstate;
 	ret = hugetlbfs_parse_options(data, &config);
 	if (ret)
 		return ret;
@@ -840,14 +866,15 @@ hugetlbfs_fill_super(struct super_block *sb, void *data, int silent)
 	if (!sbinfo)
 		return -ENOMEM;
 	sb->s_fs_info = sbinfo;
+	sbinfo->hstate = config.hstate;
 	spin_lock_init(&sbinfo->stat_lock);
 	sbinfo->max_blocks = config.nr_blocks;
 	sbinfo->free_blocks = config.nr_blocks;
 	sbinfo->max_inodes = config.nr_inodes;
 	sbinfo->free_inodes = config.nr_inodes;
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
-	sb->s_blocksize = HPAGE_SIZE;
-	sb->s_blocksize_bits = HPAGE_SHIFT;
+	sb->s_blocksize = huge_page_size(config.hstate);
+	sb->s_blocksize_bits = huge_page_shift(config.hstate);
 	sb->s_magic = HUGETLBFS_MAGIC;
 	sb->s_op = &hugetlbfs_ops;
 	sb->s_time_gran = 1;
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index b75bdb4deba..ba9263e631b 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -100,6 +100,7 @@ struct hugetlbfs_config {
 	umode_t mode;
 	long	nr_blocks;
 	long	nr_inodes;
+	struct hstate *hstate;
 };
 
 struct hugetlbfs_sb_info {
@@ -108,6 +109,7 @@ struct hugetlbfs_sb_info {
 	long	max_inodes;   /* inodes allowed */
 	long	free_inodes;  /* inodes free */
 	spinlock_t	stat_lock;
+	struct hstate *hstate;
 };
 
 
@@ -191,19 +193,21 @@ extern unsigned int default_hstate_idx;
 
 #define default_hstate (hstates[default_hstate_idx])
 
-static inline struct hstate *hstate_vma(struct vm_area_struct *vma)
+static inline struct hstate *hstate_inode(struct inode *i)
 {
-	return &default_hstate;
+	struct hugetlbfs_sb_info *hsb;
+	hsb = HUGETLBFS_SB(i->i_sb);
+	return hsb->hstate;
 }
 
 static inline struct hstate *hstate_file(struct file *f)
 {
-	return &default_hstate;
+	return hstate_inode(f->f_dentry->d_inode);
 }
 
-static inline struct hstate *hstate_inode(struct inode *i)
+static inline struct hstate *hstate_vma(struct vm_area_struct *vma)
 {
-	return &default_hstate;
+	return hstate_file(vma->vm_file);
 }
 
 static inline unsigned long huge_page_size(struct hstate *h)
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 82378d44a0c..4cf7a90e914 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1439,19 +1439,9 @@ void __unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
 			  unsigned long end, struct page *ref_page)
 {
-	/*
-	 * It is undesirable to test vma->vm_file as it should be non-null
-	 * for valid hugetlb area. However, vm_file will be NULL in the error
-	 * cleanup path of do_mmap_pgoff. When hugetlbfs ->mmap method fails,
-	 * do_mmap_pgoff() nullifies vma->vm_file before calling this function
-	 * to clean up. Since no pte has actually been setup, it is safe to
-	 * do nothing in this case.
-	 */
-	if (vma->vm_file) {
-		spin_lock(&vma->vm_file->f_mapping->i_mmap_lock);
-		__unmap_hugepage_range(vma, start, end, ref_page);
-		spin_unlock(&vma->vm_file->f_mapping->i_mmap_lock);
-	}
+	spin_lock(&vma->vm_file->f_mapping->i_mmap_lock);
+	__unmap_hugepage_range(vma, start, end, ref_page);
+	spin_unlock(&vma->vm_file->f_mapping->i_mmap_lock);
 }
 
 /*
diff --git a/mm/memory.c b/mm/memory.c
index c1c1d6d8c22..02fc6b1047b 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -901,9 +901,23 @@ unsigned long unmap_vmas(struct mmu_gather **tlbp,
 			}
 
 			if (unlikely(is_vm_hugetlb_page(vma))) {
-				unmap_hugepage_range(vma, start, end, NULL);
-				zap_work -= (end - start) /
+				/*
+				 * It is undesirable to test vma->vm_file as it
+				 * should be non-null for valid hugetlb area.
+				 * However, vm_file will be NULL in the error
+				 * cleanup path of do_mmap_pgoff. When
+				 * hugetlbfs ->mmap method fails,
+				 * do_mmap_pgoff() nullifies vma->vm_file
+				 * before calling this function to clean up.
+				 * Since no pte has actually been setup, it is
+				 * safe to do nothing in this case.
+				 */
+				if (vma->vm_file) {
+					unmap_hugepage_range(vma, start, end, NULL);
+					zap_work -= (end - start) /
 					pages_per_huge_page(hstate_vma(vma));
+				}
+
 				start = end;
 			} else
 				start = unmap_page_range(*tlbp, vma,
-- 
cgit v1.2.3


From a3437870160cf2caaac6bdd76c7377a5a4145a8c Mon Sep 17 00:00:00 2001
From: Nishanth Aravamudan <nacc@us.ibm.com>
Date: Wed, 23 Jul 2008 21:27:44 -0700
Subject: hugetlb: new sysfs interface

Provide new hugepages user APIs that are more suited to multiple hstates
in sysfs.  There is a new directory, /sys/kernel/hugepages.  Underneath
that directory there will be a directory per-supported hugepage size,
e.g.:

/sys/kernel/hugepages/hugepages-64kB
/sys/kernel/hugepages/hugepages-16384kB
/sys/kernel/hugepages/hugepages-16777216kB

corresponding to 64k, 16m and 16g respectively.  Within each
hugepages-size directory there are a number of files, corresponding to the
tracked counters in the hstate, e.g.:

/sys/kernel/hugepages/hugepages-64/nr_hugepages
/sys/kernel/hugepages/hugepages-64/nr_overcommit_hugepages
/sys/kernel/hugepages/hugepages-64/free_hugepages
/sys/kernel/hugepages/hugepages-64/resv_hugepages
/sys/kernel/hugepages/hugepages-64/surplus_hugepages

Of these files, the first two are read-write and the latter three are
read-only.  The size of the hugepage being manipulated is trivially
deducible from the enclosing directory and is always expressed in kB (to
match meminfo).

[dave@linux.vnet.ibm.com: fix build]
[nacc@us.ibm.com: hugetlb: hang off of /sys/kernel/mm rather than /sys/kernel]
[nacc@us.ibm.com: hugetlb: remove CONFIG_SYSFS dependency]
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 .../ABI/testing/sysfs-kernel-mm-hugepages          |  15 ++
 Documentation/vm/hugetlbpage.txt                   |  23 ++
 include/linux/hugetlb.h                            |   2 +
 mm/hugetlb.c                                       | 288 ++++++++++++++++-----
 4 files changed, 262 insertions(+), 66 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-kernel-mm-hugepages

diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-hugepages b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
new file mode 100644
index 00000000000..e21c00571cf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages
@@ -0,0 +1,15 @@
+What:		/sys/kernel/mm/hugepages/
+Date:		June 2008
+Contact:	Nishanth Aravamudan <nacc@us.ibm.com>, hugetlb maintainers
+Description:
+		/sys/kernel/mm/hugepages/ contains a number of subdirectories
+		of the form hugepages-<size>kB, where <size> is the page size
+		of the hugepages supported by the kernel/CPU combination.
+
+		Under these directories are a number of files:
+			nr_hugepages
+			nr_overcommit_hugepages
+			free_hugepages
+			surplus_hugepages
+			resv_hugepages
+		See Documentation/vm/hugetlbpage.txt for details.
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 3102b81bef8..8a5b5763f0f 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -95,6 +95,29 @@ this condition holds, however, no more surplus huge pages will be
 allowed on the system until one of the two sysctls are increased
 sufficiently, or the surplus huge pages go out of use and are freed.
 
+With support for multiple hugepage pools at run-time available, much of
+the hugepage userspace interface has been duplicated in sysfs. The above
+information applies to the default hugepage size (which will be
+controlled by the proc interfaces for backwards compatibility). The root
+hugepage control directory is
+
+	/sys/kernel/mm/hugepages
+
+For each hugepage size supported by the running kernel, a subdirectory
+will exist, of the form
+
+	hugepages-${size}kB
+
+Inside each of these directories, the same set of files will exist:
+
+	nr_hugepages
+	nr_overcommit_hugepages
+	free_hugepages
+	resv_hugepages
+	surplus_hugepages
+
+which function as described above for the default hugepage-sized case.
+
 If the user applications are going to request hugepages using mmap system
 call, then it is required that system administrator mount a file system of
 type hugetlbfs:
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index ba9263e631b..58c0de32e7f 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -164,6 +164,7 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 
 #ifdef CONFIG_HUGETLB_PAGE
 
+#define HSTATE_NAME_LEN 32
 /* Defines one hugetlb page size */
 struct hstate {
 	int hugetlb_next_nid;
@@ -179,6 +180,7 @@ struct hstate {
 	unsigned int nr_huge_pages_node[MAX_NUMNODES];
 	unsigned int free_huge_pages_node[MAX_NUMNODES];
 	unsigned int surplus_huge_pages_node[MAX_NUMNODES];
+	char name[HSTATE_NAME_LEN];
 };
 
 void __init hugetlb_add_hstate(unsigned order);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 4cf7a90e914..bb49ce5d006 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -14,6 +14,7 @@
 #include <linux/mempolicy.h>
 #include <linux/cpuset.h>
 #include <linux/mutex.h>
+#include <linux/sysfs.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -942,72 +943,6 @@ static void __init report_hugepages(void)
 	}
 }
 
-static int __init hugetlb_init(void)
-{
-	BUILD_BUG_ON(HPAGE_SHIFT == 0);
-
-	if (!size_to_hstate(HPAGE_SIZE)) {
-		hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
-		parsed_hstate->max_huge_pages = default_hstate_max_huge_pages;
-	}
-	default_hstate_idx = size_to_hstate(HPAGE_SIZE) - hstates;
-
-	hugetlb_init_hstates();
-
-	report_hugepages();
-
-	return 0;
-}
-module_init(hugetlb_init);
-
-/* Should be called on processing a hugepagesz=... option */
-void __init hugetlb_add_hstate(unsigned order)
-{
-	struct hstate *h;
-	if (size_to_hstate(PAGE_SIZE << order)) {
-		printk(KERN_WARNING "hugepagesz= specified twice, ignoring\n");
-		return;
-	}
-	BUG_ON(max_hstate >= HUGE_MAX_HSTATE);
-	BUG_ON(order == 0);
-	h = &hstates[max_hstate++];
-	h->order = order;
-	h->mask = ~((1ULL << (order + PAGE_SHIFT)) - 1);
-	hugetlb_init_one_hstate(h);
-	parsed_hstate = h;
-}
-
-static int __init hugetlb_setup(char *s)
-{
-	unsigned long *mhp;
-
-	/*
-	 * !max_hstate means we haven't parsed a hugepagesz= parameter yet,
-	 * so this hugepages= parameter goes to the "default hstate".
-	 */
-	if (!max_hstate)
-		mhp = &default_hstate_max_huge_pages;
-	else
-		mhp = &parsed_hstate->max_huge_pages;
-
-	if (sscanf(s, "%lu", mhp) <= 0)
-		*mhp = 0;
-
-	return 1;
-}
-__setup("hugepages=", hugetlb_setup);
-
-static unsigned int cpuset_mems_nr(unsigned int *array)
-{
-	int node;
-	unsigned int nr = 0;
-
-	for_each_node_mask(node, cpuset_current_mems_allowed)
-		nr += array[node];
-
-	return nr;
-}
-
 #ifdef CONFIG_SYSCTL
 #ifdef CONFIG_HIGHMEM
 static void try_to_free_low(struct hstate *h, unsigned long count)
@@ -1105,6 +1040,227 @@ out:
 	return ret;
 }
 
+#define HSTATE_ATTR_RO(_name) \
+	static struct kobj_attribute _name##_attr = __ATTR_RO(_name)
+
+#define HSTATE_ATTR(_name) \
+	static struct kobj_attribute _name##_attr = \
+		__ATTR(_name, 0644, _name##_show, _name##_store)
+
+static struct kobject *hugepages_kobj;
+static struct kobject *hstate_kobjs[HUGE_MAX_HSTATE];
+
+static struct hstate *kobj_to_hstate(struct kobject *kobj)
+{
+	int i;
+	for (i = 0; i < HUGE_MAX_HSTATE; i++)
+		if (hstate_kobjs[i] == kobj)
+			return &hstates[i];
+	BUG();
+	return NULL;
+}
+
+static ssize_t nr_hugepages_show(struct kobject *kobj,
+					struct kobj_attribute *attr, char *buf)
+{
+	struct hstate *h = kobj_to_hstate(kobj);
+	return sprintf(buf, "%lu\n", h->nr_huge_pages);
+}
+static ssize_t nr_hugepages_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	int err;
+	unsigned long input;
+	struct hstate *h = kobj_to_hstate(kobj);
+
+	err = strict_strtoul(buf, 10, &input);
+	if (err)
+		return 0;
+
+	h->max_huge_pages = set_max_huge_pages(h, input);
+
+	return count;
+}
+HSTATE_ATTR(nr_hugepages);
+
+static ssize_t nr_overcommit_hugepages_show(struct kobject *kobj,
+					struct kobj_attribute *attr, char *buf)
+{
+	struct hstate *h = kobj_to_hstate(kobj);
+	return sprintf(buf, "%lu\n", h->nr_overcommit_huge_pages);
+}
+static ssize_t nr_overcommit_hugepages_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	int err;
+	unsigned long input;
+	struct hstate *h = kobj_to_hstate(kobj);
+
+	err = strict_strtoul(buf, 10, &input);
+	if (err)
+		return 0;
+
+	spin_lock(&hugetlb_lock);
+	h->nr_overcommit_huge_pages = input;
+	spin_unlock(&hugetlb_lock);
+
+	return count;
+}
+HSTATE_ATTR(nr_overcommit_hugepages);
+
+static ssize_t free_hugepages_show(struct kobject *kobj,
+					struct kobj_attribute *attr, char *buf)
+{
+	struct hstate *h = kobj_to_hstate(kobj);
+	return sprintf(buf, "%lu\n", h->free_huge_pages);
+}
+HSTATE_ATTR_RO(free_hugepages);
+
+static ssize_t resv_hugepages_show(struct kobject *kobj,
+					struct kobj_attribute *attr, char *buf)
+{
+	struct hstate *h = kobj_to_hstate(kobj);
+	return sprintf(buf, "%lu\n", h->resv_huge_pages);
+}
+HSTATE_ATTR_RO(resv_hugepages);
+
+static ssize_t surplus_hugepages_show(struct kobject *kobj,
+					struct kobj_attribute *attr, char *buf)
+{
+	struct hstate *h = kobj_to_hstate(kobj);
+	return sprintf(buf, "%lu\n", h->surplus_huge_pages);
+}
+HSTATE_ATTR_RO(surplus_hugepages);
+
+static struct attribute *hstate_attrs[] = {
+	&nr_hugepages_attr.attr,
+	&nr_overcommit_hugepages_attr.attr,
+	&free_hugepages_attr.attr,
+	&resv_hugepages_attr.attr,
+	&surplus_hugepages_attr.attr,
+	NULL,
+};
+
+static struct attribute_group hstate_attr_group = {
+	.attrs = hstate_attrs,
+};
+
+static int __init hugetlb_sysfs_add_hstate(struct hstate *h)
+{
+	int retval;
+
+	hstate_kobjs[h - hstates] = kobject_create_and_add(h->name,
+							hugepages_kobj);
+	if (!hstate_kobjs[h - hstates])
+		return -ENOMEM;
+
+	retval = sysfs_create_group(hstate_kobjs[h - hstates],
+							&hstate_attr_group);
+	if (retval)
+		kobject_put(hstate_kobjs[h - hstates]);
+
+	return retval;
+}
+
+static void __init hugetlb_sysfs_init(void)
+{
+	struct hstate *h;
+	int err;
+
+	hugepages_kobj = kobject_create_and_add("hugepages", mm_kobj);
+	if (!hugepages_kobj)
+		return;
+
+	for_each_hstate(h) {
+		err = hugetlb_sysfs_add_hstate(h);
+		if (err)
+			printk(KERN_ERR "Hugetlb: Unable to add hstate %s",
+								h->name);
+	}
+}
+
+static void __exit hugetlb_exit(void)
+{
+	struct hstate *h;
+
+	for_each_hstate(h) {
+		kobject_put(hstate_kobjs[h - hstates]);
+	}
+
+	kobject_put(hugepages_kobj);
+}
+module_exit(hugetlb_exit);
+
+static int __init hugetlb_init(void)
+{
+	BUILD_BUG_ON(HPAGE_SHIFT == 0);
+
+	if (!size_to_hstate(HPAGE_SIZE)) {
+		hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
+		parsed_hstate->max_huge_pages = default_hstate_max_huge_pages;
+	}
+	default_hstate_idx = size_to_hstate(HPAGE_SIZE) - hstates;
+
+	hugetlb_init_hstates();
+
+	report_hugepages();
+
+	hugetlb_sysfs_init();
+
+	return 0;
+}
+module_init(hugetlb_init);
+
+/* Should be called on processing a hugepagesz=... option */
+void __init hugetlb_add_hstate(unsigned order)
+{
+	struct hstate *h;
+	if (size_to_hstate(PAGE_SIZE << order)) {
+		printk(KERN_WARNING "hugepagesz= specified twice, ignoring\n");
+		return;
+	}
+	BUG_ON(max_hstate >= HUGE_MAX_HSTATE);
+	BUG_ON(order == 0);
+	h = &hstates[max_hstate++];
+	h->order = order;
+	h->mask = ~((1ULL << (order + PAGE_SHIFT)) - 1);
+	snprintf(h->name, HSTATE_NAME_LEN, "hugepages-%lukB",
+					huge_page_size(h)/1024);
+	hugetlb_init_one_hstate(h);
+	parsed_hstate = h;
+}
+
+static int __init hugetlb_setup(char *s)
+{
+	unsigned long *mhp;
+
+	/*
+	 * !max_hstate means we haven't parsed a hugepagesz= parameter yet,
+	 * so this hugepages= parameter goes to the "default hstate".
+	 */
+	if (!max_hstate)
+		mhp = &default_hstate_max_huge_pages;
+	else
+		mhp = &parsed_hstate->max_huge_pages;
+
+	if (sscanf(s, "%lu", mhp) <= 0)
+		*mhp = 0;
+
+	return 1;
+}
+__setup("hugepages=", hugetlb_setup);
+
+static unsigned int cpuset_mems_nr(unsigned int *array)
+{
+	int node;
+	unsigned int nr = 0;
+
+	for_each_node_mask(node, cpuset_current_mems_allowed)
+		nr += array[node];
+
+	return nr;
+}
+
 int hugetlb_sysctl_handler(struct ctl_table *table, int write,
 			   struct file *file, void __user *buffer,
 			   size_t *length, loff_t *ppos)
-- 
cgit v1.2.3


From 5ced66c901f1cf0b684feb15c2cd8b126e263d07 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:45 -0700
Subject: hugetlb: abstract numa round robin selection

Need this as a separate function for a future patch.

No behaviour change.

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 37 ++++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index bb49ce5d006..5e620e25cf0 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -565,6 +565,27 @@ static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
 	return page;
 }
 
+/*
+ * Use a helper variable to find the next node and then
+ * copy it back to hugetlb_next_nid afterwards:
+ * otherwise there's a window in which a racer might
+ * pass invalid nid MAX_NUMNODES to alloc_pages_node.
+ * But we don't need to use a spin_lock here: it really
+ * doesn't matter if occasionally a racer chooses the
+ * same nid as we do.  Move nid forward in the mask even
+ * if we just successfully allocated a hugepage so that
+ * the next caller gets hugepages on the next node.
+ */
+static int hstate_next_node(struct hstate *h)
+{
+	int next_nid;
+	next_nid = next_node(h->hugetlb_next_nid, node_online_map);
+	if (next_nid == MAX_NUMNODES)
+		next_nid = first_node(node_online_map);
+	h->hugetlb_next_nid = next_nid;
+	return next_nid;
+}
+
 static int alloc_fresh_huge_page(struct hstate *h)
 {
 	struct page *page;
@@ -578,21 +599,7 @@ static int alloc_fresh_huge_page(struct hstate *h)
 		page = alloc_fresh_huge_page_node(h, h->hugetlb_next_nid);
 		if (page)
 			ret = 1;
-		/*
-		 * Use a helper variable to find the next node and then
-		 * copy it back to hugetlb_next_nid afterwards:
-		 * otherwise there's a window in which a racer might
-		 * pass invalid nid MAX_NUMNODES to alloc_pages_node.
-		 * But we don't need to use a spin_lock here: it really
-		 * doesn't matter if occasionally a racer chooses the
-		 * same nid as we do.  Move nid forward in the mask even
-		 * if we just successfully allocated a hugepage so that
-		 * the next caller gets hugepages on the next node.
-		 */
-		next_nid = next_node(h->hugetlb_next_nid, node_online_map);
-		if (next_nid == MAX_NUMNODES)
-			next_nid = first_node(node_online_map);
-		h->hugetlb_next_nid = next_nid;
+		next_nid = hstate_next_node(h);
 	} while (!page && h->hugetlb_next_nid != start_nid);
 
 	if (ret)
-- 
cgit v1.2.3


From b54bbf7b81170f03597c17dd0b559e3006bc9868 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:45 -0700
Subject: mm: introduce non panic alloc_bootmem

Straight forward variant of the existing __alloc_bootmem_node, only
subsequent patch when allocating giant hugepages at boot -- don't want to
panic if we can't allocate as many as the user asked for.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/bootmem.h |  4 ++++
 mm/bootmem.c            | 12 ++++++++++++
 2 files changed, 16 insertions(+)

diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index dd8fee6c46d..f352c5f125b 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -89,6 +89,10 @@ extern void *__alloc_bootmem_node(pg_data_t *pgdat,
 				  unsigned long size,
 				  unsigned long align,
 				  unsigned long goal);
+extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+				  unsigned long size,
+				  unsigned long align,
+				  unsigned long goal);
 extern unsigned long init_bootmem_node(pg_data_t *pgdat,
 				       unsigned long freepfn,
 				       unsigned long startpfn,
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 4bc6ae2fbaa..9ac972535ff 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -578,6 +578,18 @@ void * __init alloc_bootmem_section(unsigned long size,
 }
 #endif
 
+void * __init __alloc_bootmem_node_nopanic(pg_data_t *pgdat, unsigned long size,
+				   unsigned long align, unsigned long goal)
+{
+	void *ptr;
+
+	ptr = alloc_bootmem_core(pgdat->bdata, size, align, goal, 0);
+	if (ptr)
+		return ptr;
+
+	return __alloc_bootmem_nopanic(size, align, goal);
+}
+
 #ifndef ARCH_LOW_ADDRESS_LIMIT
 #define ARCH_LOW_ADDRESS_LIMIT	0xffffffffUL
 #endif
-- 
cgit v1.2.3


From 01ad1c0827db5b3695c53e296dbb2c1da16a0911 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:46 -0700
Subject: mm: export prep_compound_page to mm

hugetlb will need to get compound pages from bootmem to handle the case of
them being greater than or equal to MAX_ORDER.  Export the constructor
function needed for this.

Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/internal.h   | 2 ++
 mm/page_alloc.c | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/internal.h b/mm/internal.h
index 858ad01864d..1f43f741697 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -16,6 +16,8 @@
 void free_pgtables(struct mmu_gather *tlb, struct vm_area_struct *start_vma,
 		unsigned long floor, unsigned long ceiling);
 
+extern void prep_compound_page(struct page *page, unsigned long order);
+
 static inline void set_page_count(struct page *page, int v)
 {
 	atomic_set(&page->_count, v);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e43aae135b3..eaa86671ebb 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -264,7 +264,7 @@ static void free_compound_page(struct page *page)
 	__free_pages_ok(page, compound_order(page));
 }
 
-static void prep_compound_page(struct page *page, unsigned long order)
+void prep_compound_page(struct page *page, unsigned long order)
 {
 	int i;
 	int nr_pages = 1 << order;
-- 
cgit v1.2.3


From aa888a74977a8f2120ae9332376e179c39a6b07d Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:47 -0700
Subject: hugetlb: support larger than MAX_ORDER

This is needed on x86-64 to handle GB pages in hugetlbfs, because it is
not practical to enlarge MAX_ORDER to 1GB.

Instead the 1GB pages are only allocated at boot using the bootmem
allocator using the hugepages=...  option.

These 1G bootmem pages are never freed.  In theory it would be possible to
implement that with some complications, but since it would be a one-way
street (>= MAX_ORDER pages cannot be allocated later) I decided not to
currently.

The >= MAX_ORDER code is not ifdef'ed per architecture.  It is not very
big and the ifdef uglyness seemed not be worth it.

Known problems: /proc/meminfo and "free" do not display the memory
allocated for gb pages in "Total".  This is a little confusing for the
user.

Acked-by: Andrew Hastings <abh@cray.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 81 insertions(+), 2 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 5e620e25cf0..1a6fe87555b 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -14,6 +14,7 @@
 #include <linux/mempolicy.h>
 #include <linux/cpuset.h>
 #include <linux/mutex.h>
+#include <linux/bootmem.h>
 #include <linux/sysfs.h>
 
 #include <asm/page.h>
@@ -489,7 +490,7 @@ static void free_huge_page(struct page *page)
 	INIT_LIST_HEAD(&page->lru);
 
 	spin_lock(&hugetlb_lock);
-	if (h->surplus_huge_pages_node[nid]) {
+	if (h->surplus_huge_pages_node[nid] && huge_page_order(h) < MAX_ORDER) {
 		update_and_free_page(h, page);
 		h->surplus_huge_pages--;
 		h->surplus_huge_pages_node[nid]--;
@@ -550,6 +551,9 @@ static struct page *alloc_fresh_huge_page_node(struct hstate *h, int nid)
 {
 	struct page *page;
 
+	if (h->order >= MAX_ORDER)
+		return NULL;
+
 	page = alloc_pages_node(nid,
 		htlb_alloc_mask|__GFP_COMP|__GFP_THISNODE|
 						__GFP_REPEAT|__GFP_NOWARN,
@@ -616,6 +620,9 @@ static struct page *alloc_buddy_huge_page(struct hstate *h,
 	struct page *page;
 	unsigned int nid;
 
+	if (h->order >= MAX_ORDER)
+		return NULL;
+
 	/*
 	 * Assume we will successfully allocate the surplus page to
 	 * prevent racing processes from causing the surplus to exceed
@@ -792,6 +799,10 @@ static void return_unused_surplus_pages(struct hstate *h,
 	/* Uncommit the reservation */
 	h->resv_huge_pages -= unused_resv_pages;
 
+	/* Cannot return gigantic pages currently */
+	if (h->order >= MAX_ORDER)
+		return;
+
 	nr_pages = min(unused_resv_pages, h->surplus_huge_pages);
 
 	while (remaining_iterations-- && nr_pages) {
@@ -913,6 +924,63 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
 	return page;
 }
 
+static __initdata LIST_HEAD(huge_boot_pages);
+
+struct huge_bootmem_page {
+	struct list_head list;
+	struct hstate *hstate;
+};
+
+static int __init alloc_bootmem_huge_page(struct hstate *h)
+{
+	struct huge_bootmem_page *m;
+	int nr_nodes = nodes_weight(node_online_map);
+
+	while (nr_nodes) {
+		void *addr;
+
+		addr = __alloc_bootmem_node_nopanic(
+				NODE_DATA(h->hugetlb_next_nid),
+				huge_page_size(h), huge_page_size(h), 0);
+
+		if (addr) {
+			/*
+			 * Use the beginning of the huge page to store the
+			 * huge_bootmem_page struct (until gather_bootmem
+			 * puts them into the mem_map).
+			 */
+			m = addr;
+			if (m)
+				goto found;
+		}
+		hstate_next_node(h);
+		nr_nodes--;
+	}
+	return 0;
+
+found:
+	BUG_ON((unsigned long)virt_to_phys(m) & (huge_page_size(h) - 1));
+	/* Put them into a private list first because mem_map is not up yet */
+	list_add(&m->list, &huge_boot_pages);
+	m->hstate = h;
+	return 1;
+}
+
+/* Put bootmem huge pages into the standard lists after mem_map is up */
+static void __init gather_bootmem_prealloc(void)
+{
+	struct huge_bootmem_page *m;
+
+	list_for_each_entry(m, &huge_boot_pages, list) {
+		struct page *page = virt_to_page(m);
+		struct hstate *h = m->hstate;
+		__ClearPageReserved(page);
+		WARN_ON(page_count(page) != 1);
+		prep_compound_page(page, h->order);
+		prep_new_huge_page(h, page, page_to_nid(page));
+	}
+}
+
 static void __init hugetlb_init_one_hstate(struct hstate *h)
 {
 	unsigned long i;
@@ -923,7 +991,10 @@ static void __init hugetlb_init_one_hstate(struct hstate *h)
 	h->hugetlb_next_nid = first_node(node_online_map);
 
 	for (i = 0; i < h->max_huge_pages; ++i) {
-		if (!alloc_fresh_huge_page(h))
+		if (h->order >= MAX_ORDER) {
+			if (!alloc_bootmem_huge_page(h))
+				break;
+		} else if (!alloc_fresh_huge_page(h))
 			break;
 	}
 	h->max_huge_pages = h->free_huge_pages = h->nr_huge_pages = i;
@@ -956,6 +1027,9 @@ static void try_to_free_low(struct hstate *h, unsigned long count)
 {
 	int i;
 
+	if (h->order >= MAX_ORDER)
+		return;
+
 	for (i = 0; i < MAX_NUMNODES; ++i) {
 		struct page *page, *next;
 		struct list_head *freel = &h->hugepage_freelists[i];
@@ -982,6 +1056,9 @@ static unsigned long set_max_huge_pages(struct hstate *h, unsigned long count)
 {
 	unsigned long min_count, ret;
 
+	if (h->order >= MAX_ORDER)
+		return h->max_huge_pages;
+
 	/*
 	 * Increase the pool size
 	 * First take pages out of surplus state.  Then make up the
@@ -1210,6 +1287,8 @@ static int __init hugetlb_init(void)
 
 	hugetlb_init_hstates();
 
+	gather_bootmem_prealloc();
+
 	report_hugepages();
 
 	hugetlb_sysfs_init();
-- 
cgit v1.2.3


From 8faa8b077b2cdc4e4646842fe50b07840955a013 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:48 -0700
Subject: hugetlb: support boot allocate different sizes

Make some infrastructure changes to allow boot-time allocation of
different hugepage page sizes.

- move all basic hstate initialisation into hugetlb_add_hstate
- create a new function hugetlb_hstate_alloc_pages() to do the
  actual initial page allocations. Call this function early in
  order to allocate giant pages from bootmem.
- Check for multiple hugepages= parameters

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Andrew Hastings <abh@cray.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 39 ++++++++++++++++++++++++++++++---------
 1 file changed, 30 insertions(+), 9 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 1a6fe87555b..243a8684d18 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -981,15 +981,10 @@ static void __init gather_bootmem_prealloc(void)
 	}
 }
 
-static void __init hugetlb_init_one_hstate(struct hstate *h)
+static void __init hugetlb_hstate_alloc_pages(struct hstate *h)
 {
 	unsigned long i;
 
-	for (i = 0; i < MAX_NUMNODES; ++i)
-		INIT_LIST_HEAD(&h->hugepage_freelists[i]);
-
-	h->hugetlb_next_nid = first_node(node_online_map);
-
 	for (i = 0; i < h->max_huge_pages; ++i) {
 		if (h->order >= MAX_ORDER) {
 			if (!alloc_bootmem_huge_page(h))
@@ -997,7 +992,7 @@ static void __init hugetlb_init_one_hstate(struct hstate *h)
 		} else if (!alloc_fresh_huge_page(h))
 			break;
 	}
-	h->max_huge_pages = h->free_huge_pages = h->nr_huge_pages = i;
+	h->max_huge_pages = i;
 }
 
 static void __init hugetlb_init_hstates(void)
@@ -1005,7 +1000,9 @@ static void __init hugetlb_init_hstates(void)
 	struct hstate *h;
 
 	for_each_hstate(h) {
-		hugetlb_init_one_hstate(h);
+		/* oversize hugepages were init'ed in early boot */
+		if (h->order < MAX_ORDER)
+			hugetlb_hstate_alloc_pages(h);
 	}
 }
 
@@ -1301,6 +1298,8 @@ module_init(hugetlb_init);
 void __init hugetlb_add_hstate(unsigned order)
 {
 	struct hstate *h;
+	unsigned long i;
+
 	if (size_to_hstate(PAGE_SIZE << order)) {
 		printk(KERN_WARNING "hugepagesz= specified twice, ignoring\n");
 		return;
@@ -1310,15 +1309,21 @@ void __init hugetlb_add_hstate(unsigned order)
 	h = &hstates[max_hstate++];
 	h->order = order;
 	h->mask = ~((1ULL << (order + PAGE_SHIFT)) - 1);
+	h->nr_huge_pages = 0;
+	h->free_huge_pages = 0;
+	for (i = 0; i < MAX_NUMNODES; ++i)
+		INIT_LIST_HEAD(&h->hugepage_freelists[i]);
+	h->hugetlb_next_nid = first_node(node_online_map);
 	snprintf(h->name, HSTATE_NAME_LEN, "hugepages-%lukB",
 					huge_page_size(h)/1024);
-	hugetlb_init_one_hstate(h);
+
 	parsed_hstate = h;
 }
 
 static int __init hugetlb_setup(char *s)
 {
 	unsigned long *mhp;
+	static unsigned long *last_mhp;
 
 	/*
 	 * !max_hstate means we haven't parsed a hugepagesz= parameter yet,
@@ -1329,9 +1334,25 @@ static int __init hugetlb_setup(char *s)
 	else
 		mhp = &parsed_hstate->max_huge_pages;
 
+	if (mhp == last_mhp) {
+		printk(KERN_WARNING "hugepages= specified twice without "
+			"interleaving hugepagesz=, ignoring\n");
+		return 1;
+	}
+
 	if (sscanf(s, "%lu", mhp) <= 0)
 		*mhp = 0;
 
+	/*
+	 * Global state is always initialized later in hugetlb_init.
+	 * But we need to allocate >= MAX_ORDER hstates here early to still
+	 * use the bootmem allocator.
+	 */
+	if (max_hstate && parsed_hstate->order >= MAX_ORDER)
+		hugetlb_hstate_alloc_pages(parsed_hstate);
+
+	last_mhp = mhp;
+
 	return 1;
 }
 __setup("hugepages=", hugetlb_setup);
-- 
cgit v1.2.3


From 4abd32dbab201c3ced0b0af12accea77cd9eeffc Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:49 -0700
Subject: hugetlb: printk cleanup

- Reword sentence to clarify meaning with multiple options
- Add support for using GB prefixes for the page size
- Add extra printk to delayed > MAX_ORDER allocation code

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 243a8684d18..0c74c14dd2f 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1006,15 +1006,27 @@ static void __init hugetlb_init_hstates(void)
 	}
 }
 
+static char * __init memfmt(char *buf, unsigned long n)
+{
+	if (n >= (1UL << 30))
+		sprintf(buf, "%lu GB", n >> 30);
+	else if (n >= (1UL << 20))
+		sprintf(buf, "%lu MB", n >> 20);
+	else
+		sprintf(buf, "%lu KB", n >> 10);
+	return buf;
+}
+
 static void __init report_hugepages(void)
 {
 	struct hstate *h;
 
 	for_each_hstate(h) {
-		printk(KERN_INFO "Total HugeTLB memory allocated, "
-				"%ld %dMB pages\n",
-				h->free_huge_pages,
-				1 << (h->order + PAGE_SHIFT - 20));
+		char buf[32];
+		printk(KERN_INFO "HugeTLB registered %s page size, "
+				 "pre-allocated %ld pages\n",
+			memfmt(buf, huge_page_size(h)),
+			h->free_huge_pages);
 	}
 }
 
-- 
cgit v1.2.3


From ceb868796181dc95ea01a110e123afd391639873 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:50 -0700
Subject: hugetlb: introduce pud_huge

Straight forward extensions for huge pages located in the PUD instead of
PMDs.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/mm/hugetlbpage.c    |  6 ++++++
 arch/powerpc/mm/hugetlbpage.c |  5 +++++
 arch/s390/mm/hugetlbpage.c    |  5 +++++
 arch/sh/mm/hugetlbpage.c      |  5 +++++
 arch/sparc64/mm/hugetlbpage.c |  5 +++++
 arch/x86/mm/hugetlbpage.c     | 25 ++++++++++++++++++++++++-
 include/linux/hugetlb.h       |  5 +++++
 mm/hugetlb.c                  |  9 +++++++++
 mm/memory.c                   | 15 +++++++++++----
 9 files changed, 75 insertions(+), 5 deletions(-)

diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index 6170f097d25..c45fc7f5a97 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -107,6 +107,12 @@ int pmd_huge(pmd_t pmd)
 {
 	return 0;
 }
+
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write)
 {
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index c94dc71af98..63db7adce71 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -369,6 +369,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index 9162dc84f77..f28c43d2f61 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -120,6 +120,11 @@ int pmd_huge(pmd_t pmd)
 	return !!(pmd_val(pmd) & _SEGMENT_ENTRY_LARGE);
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmdp, int write)
 {
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index 2f9dbe0ef4a..9304117039c 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -79,6 +79,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c
index 1307b23f6a7..f27d10369e0 100644
--- a/arch/sparc64/mm/hugetlbpage.c
+++ b/arch/sparc64/mm/hugetlbpage.c
@@ -295,6 +295,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 52476fde899..a4789e87a31 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -189,6 +189,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -209,6 +214,11 @@ int pmd_huge(pmd_t pmd)
 	return !!(pmd_val(pmd) & _PAGE_PSE);
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -217,9 +227,22 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 
 	page = pte_page(*(pte_t *)pmd);
 	if (page)
-		page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT);
+		page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
 	return page;
 }
+
+struct page *
+follow_huge_pud(struct mm_struct *mm, unsigned long address,
+		pud_t *pud, int write)
+{
+	struct page *page;
+
+	page = pte_page(*(pte_t *)pud);
+	if (page)
+		page += ((address & ~PUD_MASK) >> PAGE_SHIFT);
+	return page;
+}
+
 #endif
 
 /* x86_64 also uses this file */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 58c0de32e7f..b2c17f62cac 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -50,7 +50,10 @@ struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
 			      int write);
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 				pmd_t *pmd, int write);
+struct page *follow_huge_pud(struct mm_struct *mm, unsigned long address,
+				pud_t *pud, int write);
 int pmd_huge(pmd_t pmd);
+int pud_huge(pud_t pmd);
 void hugetlb_change_protection(struct vm_area_struct *vma,
 		unsigned long address, unsigned long end, pgprot_t newprot);
 
@@ -78,8 +81,10 @@ static inline unsigned long hugetlb_total_pages(void)
 #define hugetlb_report_meminfo(buf)		0
 #define hugetlb_report_node_meminfo(n, buf)	0
 #define follow_huge_pmd(mm, addr, pmd, write)	NULL
+#define follow_huge_pud(mm, addr, pud, write)	NULL
 #define prepare_hugepage_range(file, addr, len)	(-EINVAL)
 #define pmd_huge(x)	0
+#define pud_huge(x)	0
 #define is_hugepage_only_range(mm, addr, len)	0
 #define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; })
 #define hugetlb_fault(mm, vma, addr, write)	({ BUG(); 0; })
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 0c74c14dd2f..107c1ce223c 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1996,6 +1996,15 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	return ret;
 }
 
+/* Can be overriden by architectures */
+__attribute__((weak)) struct page *
+follow_huge_pud(struct mm_struct *mm, unsigned long address,
+	       pud_t *pud, int write)
+{
+	BUG();
+	return NULL;
+}
+
 int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma,
 			struct page **pages, struct vm_area_struct **vmas,
 			unsigned long *position, int *length, int i,
diff --git a/mm/memory.c b/mm/memory.c
index 02fc6b1047b..262e3eb6601 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -998,19 +998,24 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
 		goto no_page_table;
 
 	pud = pud_offset(pgd, address);
-	if (pud_none(*pud) || unlikely(pud_bad(*pud)))
+	if (pud_none(*pud))
+		goto no_page_table;
+	if (pud_huge(*pud)) {
+		BUG_ON(flags & FOLL_GET);
+		page = follow_huge_pud(mm, address, pud, flags & FOLL_WRITE);
+		goto out;
+	}
+	if (unlikely(pud_bad(*pud)))
 		goto no_page_table;
-	
+
 	pmd = pmd_offset(pud, address);
 	if (pmd_none(*pmd))
 		goto no_page_table;
-
 	if (pmd_huge(*pmd)) {
 		BUG_ON(flags & FOLL_GET);
 		page = follow_huge_pmd(mm, address, pmd, flags & FOLL_WRITE);
 		goto out;
 	}
-
 	if (unlikely(pmd_bad(*pmd)))
 		goto no_page_table;
 
@@ -1567,6 +1572,8 @@ static int apply_to_pmd_range(struct mm_struct *mm, pud_t *pud,
 	unsigned long next;
 	int err;
 
+	BUG_ON(pud_huge(*pud));
+
 	pmd = pmd_alloc(mm, pud, addr);
 	if (!pmd)
 		return -ENOMEM;
-- 
cgit v1.2.3


From 39c11e6c05b7fedbf7ed4df3908b25f622d56204 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:50 -0700
Subject: x86: support GB hugepages on 64-bit

Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/hugetlbpage.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index a4789e87a31..b7a65a07af0 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -134,9 +134,14 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 	pgd = pgd_offset(mm, addr);
 	pud = pud_alloc(mm, pgd, addr);
 	if (pud) {
-		if (pud_none(*pud))
-			huge_pmd_share(mm, addr, pud);
-		pte = (pte_t *) pmd_alloc(mm, pud, addr);
+		if (sz == PUD_SIZE) {
+			pte = (pte_t *)pud;
+		} else {
+			BUG_ON(sz != PMD_SIZE);
+			if (pud_none(*pud))
+				huge_pmd_share(mm, addr, pud);
+			pte = (pte_t *) pmd_alloc(mm, pud, addr);
+		}
 	}
 	BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
 
@@ -152,8 +157,11 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	pgd = pgd_offset(mm, addr);
 	if (pgd_present(*pgd)) {
 		pud = pud_offset(pgd, addr);
-		if (pud_present(*pud))
+		if (pud_present(*pud)) {
+			if (pud_large(*pud))
+				return (pte_t *)pud;
 			pmd = pmd_offset(pud, addr);
+		}
 	}
 	return (pte_t *) pmd;
 }
@@ -216,7 +224,7 @@ int pmd_huge(pmd_t pmd)
 
 int pud_huge(pud_t pud)
 {
-	return 0;
+	return !!(pud_val(pud) & _PAGE_PSE);
 }
 
 struct page *
@@ -252,6 +260,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
 		unsigned long addr, unsigned long len,
 		unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
@@ -264,7 +273,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
 	}
 
 full_search:
-	addr = ALIGN(start_addr, HPAGE_SIZE);
+	addr = ALIGN(start_addr, huge_page_size(h));
 
 	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
 		/* At this point:  (!vma || addr < vma->vm_end). */
@@ -286,7 +295,7 @@ full_search:
 		}
 		if (addr + mm->cached_hole_size < vma->vm_start)
 		        mm->cached_hole_size = vma->vm_start - addr;
-		addr = ALIGN(vma->vm_end, HPAGE_SIZE);
+		addr = ALIGN(vma->vm_end, huge_page_size(h));
 	}
 }
 
@@ -294,6 +303,7 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
 		unsigned long addr0, unsigned long len,
 		unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma, *prev_vma;
 	unsigned long base = mm->mmap_base, addr = addr0;
@@ -314,7 +324,7 @@ try_again:
 		goto fail;
 
 	/* either no address requested or cant fit in requested address hole */
-	addr = (mm->free_area_cache - len) & HPAGE_MASK;
+	addr = (mm->free_area_cache - len) & huge_page_mask(h);
 	do {
 		/*
 		 * Lookup failure means no vma is above this address,
@@ -345,7 +355,7 @@ try_again:
 		        largest_hole = vma->vm_start - addr;
 
 		/* try just below the current vma->vm_start */
-		addr = (vma->vm_start - len) & HPAGE_MASK;
+		addr = (vma->vm_start - len) & huge_page_mask(h);
 	} while (len <= vma->vm_start);
 
 fail:
@@ -383,10 +393,11 @@ unsigned long
 hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		unsigned long len, unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 
-	if (len & ~HPAGE_MASK)
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
 	if (len > TASK_SIZE)
 		return -ENOMEM;
@@ -398,7 +409,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	}
 
 	if (addr) {
-		addr = ALIGN(addr, HPAGE_SIZE);
+		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
 		    (!vma || addr + len <= vma->vm_start))
-- 
cgit v1.2.3


From b4718e628dbf68a2dee23b5709e2aa3190409c56 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@suse.de>
Date: Wed, 23 Jul 2008 21:27:51 -0700
Subject: x86: add hugepagesz option on 64-bit

Add an hugepagesz=...  option similar to IA64, PPC etc.  to x86-64.

This finally allows to select GB pages for hugetlbfs in x86 now that all
the infrastructure is in place.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt | 11 +++++++++--
 arch/x86/mm/hugetlbpage.c           | 17 +++++++++++++++++
 include/asm-x86/page.h              |  2 ++
 3 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5e20ccb5a73..d55fd88fd0a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -774,8 +774,15 @@ and is between 256 and 4096 characters. It is defined in the file
 	hisax=		[HW,ISDN]
 			See Documentation/isdn/README.HiSax.
 
-	hugepages=	[HW,X86-32,IA-64] Maximal number of HugeTLB pages.
-	hugepagesz=	[HW,IA-64,PPC] The size of the HugeTLB pages.
+	hugepages=	[HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
+	hugepagesz=	[HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
+			On x86 this option can be specified multiple times
+			interleaved with hugepages= to reserve huge pages
+			of different sizes. Valid pages sizes on x86-64
+			are 2M (when the CPU supports "pse") and 1G (when the
+			CPU supports the "pdpe1gb" cpuinfo flag)
+			Note that 1GB pages can only be allocated at boot time
+			using hugepages= and not freed afterwards.
 
 	i8042.direct	[HW] Put keyboard port into non-translated mode
 	i8042.dumbkbd	[HW] Pretend that controller can only read data from
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index b7a65a07af0..8f307d914c2 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -425,3 +425,20 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 
 #endif /*HAVE_ARCH_HUGETLB_UNMAPPED_AREA*/
 
+#ifdef CONFIG_X86_64
+static __init int setup_hugepagesz(char *opt)
+{
+	unsigned long ps = memparse(opt, &opt);
+	if (ps == PMD_SIZE) {
+		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
+	} else if (ps == PUD_SIZE && cpu_has_gbpages) {
+		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+	} else {
+		printk(KERN_ERR "hugepagesz: Unsupported page size %lu M\n",
+			ps >> 20);
+		return 0;
+	}
+	return 1;
+}
+__setup("hugepagesz=", setup_hugepagesz);
+#endif
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index 6c846228948..6e02098b160 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -32,6 +32,8 @@
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 
+#define HUGE_MAX_HSTATE 2
+
 /* to align the pointer to the (next) page boundary */
 #define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
 
-- 
cgit v1.2.3


From e11bfbfcb08ef4223b863799897c19cdf7c5bc00 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Wed, 23 Jul 2008 21:27:52 -0700
Subject: hugetlb: override default huge page size

Allow configurations with the default huge page size which is different to
the traditional HPAGE_SIZE size.  The default huge page size is the one
represented in the legacy /proc ABIs, SHM, and which is defaulted to when
mounting hugetlbfs filesystems.

This is implemented with a new kernel option default_hugepagesz=, which
defaults to HPAGE_SIZE if not specified.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt |  7 +++++++
 mm/hugetlb.c                        | 23 +++++++++++++++++------
 2 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d55fd88fd0a..30278e9e521 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -783,6 +783,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			CPU supports the "pdpe1gb" cpuinfo flag)
 			Note that 1GB pages can only be allocated at boot time
 			using hugepages= and not freed afterwards.
+	default_hugepagesz=
+			[same as hugepagesz=] The size of the default
+			HugeTLB page size. This is the size represented by
+			the legacy /proc/ hugepages APIs, used for SHM, and
+			default size when mounting hugetlbfs filesystems.
+			Defaults to the default architecture's huge page size
+			if not specified.
 
 	i8042.direct	[HW] Put keyboard port into non-translated mode
 	i8042.dumbkbd	[HW] Pretend that controller can only read data from
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 107c1ce223c..2a2f6e86940 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -34,6 +34,7 @@ struct hstate hstates[HUGE_MAX_HSTATE];
 /* for command line parsing */
 static struct hstate * __initdata parsed_hstate;
 static unsigned long __initdata default_hstate_max_huge_pages;
+static unsigned long __initdata default_hstate_size;
 
 #define for_each_hstate(h) \
 	for ((h) = hstates; (h) < &hstates[max_hstate]; (h)++)
@@ -1288,11 +1289,14 @@ static int __init hugetlb_init(void)
 {
 	BUILD_BUG_ON(HPAGE_SHIFT == 0);
 
-	if (!size_to_hstate(HPAGE_SIZE)) {
-		hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
-		parsed_hstate->max_huge_pages = default_hstate_max_huge_pages;
+	if (!size_to_hstate(default_hstate_size)) {
+		default_hstate_size = HPAGE_SIZE;
+		if (!size_to_hstate(default_hstate_size))
+			hugetlb_add_hstate(HUGETLB_PAGE_ORDER);
 	}
-	default_hstate_idx = size_to_hstate(HPAGE_SIZE) - hstates;
+	default_hstate_idx = size_to_hstate(default_hstate_size) - hstates;
+	if (default_hstate_max_huge_pages)
+		default_hstate.max_huge_pages = default_hstate_max_huge_pages;
 
 	hugetlb_init_hstates();
 
@@ -1332,7 +1336,7 @@ void __init hugetlb_add_hstate(unsigned order)
 	parsed_hstate = h;
 }
 
-static int __init hugetlb_setup(char *s)
+static int __init hugetlb_nrpages_setup(char *s)
 {
 	unsigned long *mhp;
 	static unsigned long *last_mhp;
@@ -1367,7 +1371,14 @@ static int __init hugetlb_setup(char *s)
 
 	return 1;
 }
-__setup("hugepages=", hugetlb_setup);
+__setup("hugepages=", hugetlb_nrpages_setup);
+
+static int __init hugetlb_default_setup(char *s)
+{
+	default_hstate_size = memparse(s, &s);
+	return 1;
+}
+__setup("default_hugepagesz=", hugetlb_default_setup);
 
 static unsigned int cpuset_mems_nr(unsigned int *array)
 {
-- 
cgit v1.2.3


From 53ba51d21d6e048424ab8aadfebdb1f25ae07b60 Mon Sep 17 00:00:00 2001
From: Jon Tollefson <kniht@linux.vnet.ibm.com>
Date: Wed, 23 Jul 2008 21:27:52 -0700
Subject: hugetlb: allow arch overridden hugepage allocation

Allow alloc_bootmem_huge_page() to be overridden by architectures that
can't always use bootmem.  This requires huge_boot_pages to be available
for use by this function.

This is required for powerpc 16G pages, which have to be reserved prior to
boot-time.  The location of these pages are indicated in the device tree.

Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/hugetlb.h | 10 ++++++++++
 mm/hugetlb.c            | 11 +++--------
 2 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index b2c17f62cac..9a71d4cc88c 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -39,6 +39,7 @@ void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed);
 extern unsigned long hugepages_treat_as_movable;
 extern const unsigned long hugetlb_zero, hugetlb_infinity;
 extern int sysctl_hugetlb_shm_group;
+extern struct list_head huge_boot_pages;
 
 /* arch callbacks */
 
@@ -188,6 +189,14 @@ struct hstate {
 	char name[HSTATE_NAME_LEN];
 };
 
+struct huge_bootmem_page {
+	struct list_head list;
+	struct hstate *hstate;
+};
+
+/* arch callback */
+int __init alloc_bootmem_huge_page(struct hstate *h);
+
 void __init hugetlb_add_hstate(unsigned order);
 struct hstate *size_to_hstate(unsigned long size);
 
@@ -256,6 +265,7 @@ static inline struct hstate *page_hstate(struct page *page)
 
 #else
 struct hstate {};
+#define alloc_bootmem_huge_page(h) NULL
 #define hstate_file(f) NULL
 #define hstate_vma(v) NULL
 #define hstate_inode(i) NULL
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 2a2f6e86940..3e1506b808a 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -31,6 +31,8 @@ static int max_hstate;
 unsigned int default_hstate_idx;
 struct hstate hstates[HUGE_MAX_HSTATE];
 
+__initdata LIST_HEAD(huge_boot_pages);
+
 /* for command line parsing */
 static struct hstate * __initdata parsed_hstate;
 static unsigned long __initdata default_hstate_max_huge_pages;
@@ -925,14 +927,7 @@ static struct page *alloc_huge_page(struct vm_area_struct *vma,
 	return page;
 }
 
-static __initdata LIST_HEAD(huge_boot_pages);
-
-struct huge_bootmem_page {
-	struct list_head list;
-	struct hstate *hstate;
-};
-
-static int __init alloc_bootmem_huge_page(struct hstate *h)
+__attribute__((weak)) int alloc_bootmem_huge_page(struct hstate *h)
 {
 	struct huge_bootmem_page *m;
 	int nr_nodes = nodes_weight(node_online_map);
-- 
cgit v1.2.3


From ec4b2c0c8312d1118c2acd00c89988ecf955d5cc Mon Sep 17 00:00:00 2001
From: Jon Tollefson <kniht@linux.vnet.ibm.com>
Date: Wed, 23 Jul 2008 21:27:53 -0700
Subject: powerpc: function to allocate gigantic hugepages

The 16G page locations have been saved during early boot in an array.  The
alloc_bootmem_huge_page() function adds a page from here to the
huge_boot_pages list.

Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/mm/hugetlbpage.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 63db7adce71..5df82186fc9 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -29,6 +29,12 @@
 
 #define NUM_LOW_AREAS	(0x100000000UL >> SID_SHIFT)
 #define NUM_HIGH_AREAS	(PGTABLE_RANGE >> HTLB_AREA_SHIFT)
+#define MAX_NUMBER_GPAGES	1024
+
+/* Tracks the 16G pages after the device tree is scanned and before the
+ * huge_boot_pages list is ready.  */
+static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
+static unsigned nr_gpages;
 
 unsigned int hugepte_shift;
 #define PTRS_PER_HUGEPTE	(1 << hugepte_shift)
@@ -104,6 +110,21 @@ pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr)
 }
 #endif
 
+/* Moves the gigantic page addresses from the temporary list to the
+ * huge_boot_pages list.  */
+int alloc_bootmem_huge_page(struct hstate *h)
+{
+	struct huge_bootmem_page *m;
+	if (nr_gpages == 0)
+		return 0;
+	m = phys_to_virt(gpage_freearray[--nr_gpages]);
+	gpage_freearray[nr_gpages] = 0;
+	list_add(&m->list, &huge_boot_pages);
+	m->hstate = h;
+	return 1;
+}
+
+
 /* Modelled after find_linux_pte() */
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
-- 
cgit v1.2.3


From 658013e93eb70494f7300bc90457b09a807232a4 Mon Sep 17 00:00:00 2001
From: Jon Tollefson <kniht@linux.vnet.ibm.com>
Date: Wed, 23 Jul 2008 21:27:54 -0700
Subject: powerpc: scan device tree for gigantic pages

The 16G huge pages have to be reserved in the HMC prior to boot.  The
location of the pages are placed in the device tree.  This patch adds code
to scan the device tree during very early boot and save these page
locations until hugetlbfs is ready for them.

Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/mm/hash_utils_64.c  | 44 +++++++++++++++++++++++++++++++++++++++-
 arch/powerpc/mm/hugetlbpage.c    | 16 +++++++++++++++
 include/asm-powerpc/mmu-hash64.h |  2 ++
 3 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 8d3b58ebd38..ae4c717243a 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -68,6 +68,7 @@
 
 #define KB (1024)
 #define MB (1024*KB)
+#define GB (1024L*MB)
 
 /*
  * Note:  pte   --> Linux PTE
@@ -329,6 +330,44 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
 	return 0;
 }
 
+/* Scan for 16G memory blocks that have been set aside for huge pages
+ * and reserve those blocks for 16G huge pages.
+ */
+static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
+					const char *uname, int depth,
+					void *data) {
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	unsigned long *addr_prop;
+	u32 *page_count_prop;
+	unsigned int expected_pages;
+	long unsigned int phys_addr;
+	long unsigned int block_size;
+
+	/* We are scanning "memory" nodes only */
+	if (type == NULL || strcmp(type, "memory") != 0)
+		return 0;
+
+	/* This property is the log base 2 of the number of virtual pages that
+	 * will represent this memory block. */
+	page_count_prop = of_get_flat_dt_prop(node, "ibm,expected#pages", NULL);
+	if (page_count_prop == NULL)
+		return 0;
+	expected_pages = (1 << page_count_prop[0]);
+	addr_prop = of_get_flat_dt_prop(node, "reg", NULL);
+	if (addr_prop == NULL)
+		return 0;
+	phys_addr = addr_prop[0];
+	block_size = addr_prop[1];
+	if (block_size != (16 * GB))
+		return 0;
+	printk(KERN_INFO "Huge page(16GB) memory: "
+			"addr = 0x%lX size = 0x%lX pages = %d\n",
+			phys_addr, block_size, expected_pages);
+	lmb_reserve(phys_addr, block_size * expected_pages);
+	add_gpage(phys_addr, block_size, expected_pages);
+	return 0;
+}
+
 static void __init htab_init_page_sizes(void)
 {
 	int rc;
@@ -418,7 +457,10 @@ static void __init htab_init_page_sizes(void)
 	       );
 
 #ifdef CONFIG_HUGETLB_PAGE
-	/* Init large page size. Currently, we pick 16M or 1M depending
+	/* Reserve 16G huge page memory sections for huge pages */
+	of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
+
+/* Init large page size. Currently, we pick 16M or 1M depending
 	 * on what is available
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift)
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 5df82186fc9..e2a650a9e53 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -110,6 +110,22 @@ pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr)
 }
 #endif
 
+/* Build list of addresses of gigantic pages.  This function is used in early
+ * boot before the buddy or bootmem allocator is setup.
+ */
+void add_gpage(unsigned long addr, unsigned long page_size,
+	unsigned long number_of_pages)
+{
+	if (!addr)
+		return;
+	while (number_of_pages > 0) {
+		gpage_freearray[nr_gpages] = addr;
+		nr_gpages++;
+		number_of_pages--;
+		addr += page_size;
+	}
+}
+
 /* Moves the gigantic page addresses from the temporary list to the
  * huge_boot_pages list.  */
 int alloc_bootmem_huge_page(struct hstate *h)
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
index d1dc16afb11..b61181aa774 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/include/asm-powerpc/mmu-hash64.h
@@ -281,6 +281,8 @@ extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long mode,
 			     int psize, int ssize);
 extern void set_huge_psize(int psize);
+extern void add_gpage(unsigned long addr, unsigned long page_size,
+			  unsigned long number_of_pages);
 extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
 
 extern void htab_initialize(void);
-- 
cgit v1.2.3


From 91224346aa8c1cdaa660300a98e0b074a3a95030 Mon Sep 17 00:00:00 2001
From: Jon Tollefson <kniht@linux.vnet.ibm.com>
Date: Wed, 23 Jul 2008 21:27:55 -0700
Subject: powerpc: define support for 16G hugepages

The huge page size is defined for 16G pages.  If a hugepagesz of 16G is
specified at boot-time then it becomes the huge page size instead of the
default 16M.

The change in pgtable-64K.h is to the macro pte_iterate_hashed_subpages to
make the increment to va (the 1 being shifted) be a long so that it is not
shifted to 0.  Otherwise it would create an infinite loop when the shift
value is for a 16G page (when base page size is 64K).

Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/mm/hugetlbpage.c     | 62 +++++++++++++++++++++++++++------------
 include/asm-powerpc/pgtable-64k.h |  2 +-
 2 files changed, 45 insertions(+), 19 deletions(-)

diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index e2a650a9e53..19b1a9cec6d 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -24,8 +24,9 @@
 #include <asm/cputable.h>
 #include <asm/spu.h>
 
-#define HPAGE_SHIFT_64K	16
-#define HPAGE_SHIFT_16M	24
+#define PAGE_SHIFT_64K	16
+#define PAGE_SHIFT_16M	24
+#define PAGE_SHIFT_16G	34
 
 #define NUM_LOW_AREAS	(0x100000000UL >> SID_SHIFT)
 #define NUM_HIGH_AREAS	(PGTABLE_RANGE >> HTLB_AREA_SHIFT)
@@ -95,7 +96,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 static inline
 pmd_t *hpmd_offset(pud_t *pud, unsigned long addr)
 {
-	if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+	if (HPAGE_SHIFT == PAGE_SHIFT_64K)
 		return pmd_offset(pud, addr);
 	else
 		return (pmd_t *) pud;
@@ -103,7 +104,7 @@ pmd_t *hpmd_offset(pud_t *pud, unsigned long addr)
 static inline
 pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr)
 {
-	if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+	if (HPAGE_SHIFT == PAGE_SHIFT_64K)
 		return pmd_alloc(mm, pud, addr);
 	else
 		return (pmd_t *) pud;
@@ -260,7 +261,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 			continue;
 		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
 #else
-		if (HPAGE_SHIFT == HPAGE_SHIFT_64K) {
+		if (HPAGE_SHIFT == PAGE_SHIFT_64K) {
 			if (pud_none_or_clear_bad(pud))
 				continue;
 			hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
@@ -592,20 +593,40 @@ void set_huge_psize(int psize)
 {
 	/* Check that it is a page size supported by the hardware and
 	 * that it fits within pagetable limits. */
-	if (mmu_psize_defs[psize].shift && mmu_psize_defs[psize].shift < SID_SHIFT &&
+	if (mmu_psize_defs[psize].shift &&
+		mmu_psize_defs[psize].shift < SID_SHIFT_1T &&
 		(mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
-			mmu_psize_defs[psize].shift == HPAGE_SHIFT_64K)) {
+		 mmu_psize_defs[psize].shift == PAGE_SHIFT_64K ||
+		 mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) {
+		/* Return if huge page size is the same as the
+		 * base page size. */
+		if (mmu_psize_defs[psize].shift == PAGE_SHIFT)
+			return;
+
 		HPAGE_SHIFT = mmu_psize_defs[psize].shift;
 		mmu_huge_psize = psize;
-#ifdef CONFIG_PPC_64K_PAGES
-		hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-#else
-		if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
-			hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-		else
-			hugepte_shift = (PUD_SHIFT-HPAGE_SHIFT);
-#endif
 
+		switch (HPAGE_SHIFT) {
+		case PAGE_SHIFT_64K:
+		    /* We only allow 64k hpages with 4k base page,
+		     * which was checked above, and always put them
+		     * at the PMD */
+		    hugepte_shift = PMD_SHIFT;
+		    break;
+		case PAGE_SHIFT_16M:
+		    /* 16M pages can be at two different levels
+		     * of pagestables based on base page size */
+		    if (PAGE_SHIFT == PAGE_SHIFT_64K)
+			    hugepte_shift = PMD_SHIFT;
+		    else /* 4k base page */
+			    hugepte_shift = PUD_SHIFT;
+		    break;
+		case PAGE_SHIFT_16G:
+		    /* 16G pages are always at PGD level */
+		    hugepte_shift = PGDIR_SHIFT;
+		    break;
+		}
+		hugepte_shift -= HPAGE_SHIFT;
 	} else
 		HPAGE_SHIFT = 0;
 }
@@ -621,17 +642,22 @@ static int __init hugepage_setup_sz(char *str)
 	shift = __ffs(size);
 	switch (shift) {
 #ifndef CONFIG_PPC_64K_PAGES
-	case HPAGE_SHIFT_64K:
+	case PAGE_SHIFT_64K:
 		mmu_psize = MMU_PAGE_64K;
 		break;
 #endif
-	case HPAGE_SHIFT_16M:
+	case PAGE_SHIFT_16M:
 		mmu_psize = MMU_PAGE_16M;
 		break;
+	case PAGE_SHIFT_16G:
+		mmu_psize = MMU_PAGE_16G;
+		break;
 	}
 
-	if (mmu_psize >=0 && mmu_psize_defs[mmu_psize].shift)
+	if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift) {
 		set_huge_psize(mmu_psize);
+		hugetlb_add_hstate(shift - PAGE_SHIFT);
+	}
 	else
 		printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
 
diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h
index c5007712473..7e54adb3559 100644
--- a/include/asm-powerpc/pgtable-64k.h
+++ b/include/asm-powerpc/pgtable-64k.h
@@ -138,7 +138,7 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
                 unsigned __split = (psize == MMU_PAGE_4K ||                 \
 				    psize == MMU_PAGE_64K_AP);              \
                 shift = mmu_psize_defs[psize].shift;                        \
-	        for (index = 0; va < __end; index++, va += (1 << shift)) {  \
+		for (index = 0; va < __end; index++, va += (1L << shift)) { \
 		        if (!__split || __rpte_sub_valid(rpte, index)) do { \
 
 #define pte_iterate_hashed_end() } while(0); } } while(0)
-- 
cgit v1.2.3


From f4a67cceee4a6f5ed38011a698c9e34747270ae5 Mon Sep 17 00:00:00 2001
From: Jon Tollefson <kniht@linux.vnet.ibm.com>
Date: Wed, 23 Jul 2008 21:27:55 -0700
Subject: fs: check for statfs overflow

Adds a check for an overflow in the filesystem size so if someone is
checking with statfs() on a 16G blocksize hugetlbfs in a 32bit binary that
it will report back EOVERFLOW instead of a size of 0.

Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/compat.c | 8 ++++----
 fs/open.c   | 3 ++-
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/fs/compat.c b/fs/compat.c
index ed43e17a5dc..b4660428176 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -197,8 +197,8 @@ static int put_compat_statfs(struct compat_statfs __user *ubuf, struct kstatfs *
 {
 	
 	if (sizeof ubuf->f_blocks == 4) {
-		if ((kbuf->f_blocks | kbuf->f_bfree | kbuf->f_bavail) &
-		    0xffffffff00000000ULL)
+		if ((kbuf->f_blocks | kbuf->f_bfree | kbuf->f_bavail |
+		     kbuf->f_bsize | kbuf->f_frsize) & 0xffffffff00000000ULL)
 			return -EOVERFLOW;
 		/* f_files and f_ffree may be -1; it's okay
 		 * to stuff that into 32 bits */
@@ -271,8 +271,8 @@ out:
 static int put_compat_statfs64(struct compat_statfs64 __user *ubuf, struct kstatfs *kbuf)
 {
 	if (sizeof ubuf->f_blocks == 4) {
-		if ((kbuf->f_blocks | kbuf->f_bfree | kbuf->f_bavail) &
-		    0xffffffff00000000ULL)
+		if ((kbuf->f_blocks | kbuf->f_bfree | kbuf->f_bavail |
+		     kbuf->f_bsize | kbuf->f_frsize) & 0xffffffff00000000ULL)
 			return -EOVERFLOW;
 		/* f_files and f_ffree may be -1; it's okay
 		 * to stuff that into 32 bits */
diff --git a/fs/open.c b/fs/open.c
index a99ad09c319..bb98d2fe809 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -64,7 +64,8 @@ static int vfs_statfs_native(struct dentry *dentry, struct statfs *buf)
 		memcpy(buf, &st, sizeof(st));
 	else {
 		if (sizeof buf->f_blocks == 4) {
-			if ((st.f_blocks | st.f_bfree | st.f_bavail) &
+			if ((st.f_blocks | st.f_bfree | st.f_bavail |
+			     st.f_bsize | st.f_frsize) &
 			    0xffffffff00000000ULL)
 				return -EOVERFLOW;
 			/*
-- 
cgit v1.2.3


From 0d9ea75443dc7e37843e656b8ebc947a6d16d618 Mon Sep 17 00:00:00 2001
From: Jon Tollefson <kniht@linux.vnet.ibm.com>
Date: Wed, 23 Jul 2008 21:27:56 -0700
Subject: powerpc: support multiple hugepage sizes

Instead of using the variable mmu_huge_psize to keep track of the huge
page size we use an array of MMU_PAGE_* values.  For each supported huge
page size we need to know the hugepte_shift value and have a
pgtable_cache.  The hstate or an mmu_huge_psizes index is passed to
functions so that they know which huge page size they should use.

The hugepage sizes 16M and 64K are setup(if available on the hardware) so
that they don't have to be set on the boot cmd line in order to use them.
The number of 16G pages have to be specified at boot-time though (e.g.
hugepagesz=16G hugepages=5).

Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt |  10 +-
 arch/powerpc/mm/hash_utils_64.c     |   9 +-
 arch/powerpc/mm/hugetlbpage.c       | 274 +++++++++++++++++++++++-------------
 arch/powerpc/mm/init_64.c           |   8 +-
 arch/powerpc/mm/tlb_64.c            |   2 +-
 include/asm-powerpc/hugetlb.h       |   5 +-
 include/asm-powerpc/mmu-hash64.h    |   4 +-
 include/asm-powerpc/page_64.h       |   1 +
 include/asm-powerpc/pgalloc-64.h    |   4 +-
 9 files changed, 199 insertions(+), 118 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 30278e9e521..01a2992b575 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -776,11 +776,11 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	hugepages=	[HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
 	hugepagesz=	[HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
-			On x86 this option can be specified multiple times
-			interleaved with hugepages= to reserve huge pages
-			of different sizes. Valid pages sizes on x86-64
-			are 2M (when the CPU supports "pse") and 1G (when the
-			CPU supports the "pdpe1gb" cpuinfo flag)
+			On x86-64 and powerpc, this option can be specified
+			multiple times interleaved with hugepages= to reserve
+			huge pages of different sizes. Valid pages sizes on
+			x86-64 are 2M (when the CPU supports "pse") and 1G
+			(when the CPU supports the "pdpe1gb" cpuinfo flag)
 			Note that 1GB pages can only be allocated at boot time
 			using hugepages= and not freed afterwards.
 	default_hugepagesz=
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index ae4c717243a..5ce5a4dcd00 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -103,7 +103,6 @@ int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
 u16 mmu_slb_size = 64;
 #ifdef CONFIG_HUGETLB_PAGE
-int mmu_huge_psize = MMU_PAGE_16M;
 unsigned int HPAGE_SHIFT;
 #endif
 #ifdef CONFIG_PPC_64K_PAGES
@@ -460,15 +459,15 @@ static void __init htab_init_page_sizes(void)
 	/* Reserve 16G huge page memory sections for huge pages */
 	of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
 
-/* Init large page size. Currently, we pick 16M or 1M depending
+/* Set default large page size. Currently, we pick 16M or 1M depending
 	 * on what is available
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift)
-		set_huge_psize(MMU_PAGE_16M);
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
 	/* With 4k/4level pagetables, we can't (for now) cope with a
 	 * huge page size < PMD_SIZE */
 	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
-		set_huge_psize(MMU_PAGE_1M);
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
 #endif /* CONFIG_HUGETLB_PAGE */
 }
 
@@ -889,7 +888,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* Handle hugepage regions */
-	if (HPAGE_SHIFT && psize == mmu_huge_psize) {
+	if (HPAGE_SHIFT && mmu_huge_psizes[psize]) {
 		DBG_LOW(" -> huge page !\n");
 		return hash_huge_page(mm, access, ea, vsid, local, trap);
 	}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 19b1a9cec6d..fb42c4dd321 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -37,15 +37,30 @@
 static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
 static unsigned nr_gpages;
 
-unsigned int hugepte_shift;
-#define PTRS_PER_HUGEPTE	(1 << hugepte_shift)
-#define HUGEPTE_TABLE_SIZE	(sizeof(pte_t) << hugepte_shift)
+/* Array of valid huge page sizes - non-zero value(hugepte_shift) is
+ * stored for the huge page sizes that are valid.
+ */
+unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
+
+#define hugepte_shift			mmu_huge_psizes
+#define PTRS_PER_HUGEPTE(psize)		(1 << hugepte_shift[psize])
+#define HUGEPTE_TABLE_SIZE(psize)	(sizeof(pte_t) << hugepte_shift[psize])
+
+#define HUGEPD_SHIFT(psize)		(mmu_psize_to_shift(psize) \
+						+ hugepte_shift[psize])
+#define HUGEPD_SIZE(psize)		(1UL << HUGEPD_SHIFT(psize))
+#define HUGEPD_MASK(psize)		(~(HUGEPD_SIZE(psize)-1))
 
-#define HUGEPD_SHIFT		(HPAGE_SHIFT + hugepte_shift)
-#define HUGEPD_SIZE		(1UL << HUGEPD_SHIFT)
-#define HUGEPD_MASK		(~(HUGEPD_SIZE-1))
+/* Subtract one from array size because we don't need a cache for 4K since
+ * is not a huge page size */
+#define huge_pgtable_cache(psize)	(pgtable_cache[HUGEPTE_CACHE_NUM \
+							+ psize-1])
+#define HUGEPTE_CACHE_NAME(psize)	(huge_pgtable_cache_name[psize])
 
-#define huge_pgtable_cache	(pgtable_cache[HUGEPTE_CACHE_NUM])
+static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
+	"unused_4K", "hugepte_cache_64K", "unused_64K_AP",
+	"hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G"
+};
 
 /* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
  * will choke on pointers to hugepte tables, which is handy for
@@ -56,24 +71,49 @@ typedef struct { unsigned long pd; } hugepd_t;
 
 #define hugepd_none(hpd)	((hpd).pd == 0)
 
+static inline int shift_to_mmu_psize(unsigned int shift)
+{
+	switch (shift) {
+#ifndef CONFIG_PPC_64K_PAGES
+	case PAGE_SHIFT_64K:
+	    return MMU_PAGE_64K;
+#endif
+	case PAGE_SHIFT_16M:
+	    return MMU_PAGE_16M;
+	case PAGE_SHIFT_16G:
+	    return MMU_PAGE_16G;
+	}
+	return -1;
+}
+
+static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
+{
+	if (mmu_psize_defs[mmu_psize].shift)
+		return mmu_psize_defs[mmu_psize].shift;
+	BUG();
+}
+
 static inline pte_t *hugepd_page(hugepd_t hpd)
 {
 	BUG_ON(!(hpd.pd & HUGEPD_OK));
 	return (pte_t *)(hpd.pd & ~HUGEPD_OK);
 }
 
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr)
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
+				    struct hstate *hstate)
 {
-	unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1));
+	unsigned int shift = huge_page_shift(hstate);
+	int psize = shift_to_mmu_psize(shift);
+	unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1));
 	pte_t *dir = hugepd_page(*hpdp);
 
 	return dir + idx;
 }
 
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
-			   unsigned long address)
+			   unsigned long address, unsigned int psize)
 {
-	pte_t *new = kmem_cache_alloc(huge_pgtable_cache,
+	pte_t *new = kmem_cache_alloc(huge_pgtable_cache(psize),
 				      GFP_KERNEL|__GFP_REPEAT);
 
 	if (! new)
@@ -81,7 +121,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
 	spin_lock(&mm->page_table_lock);
 	if (!hugepd_none(*hpdp))
-		kmem_cache_free(huge_pgtable_cache, new);
+		kmem_cache_free(huge_pgtable_cache(psize), new);
 	else
 		hpdp->pd = (unsigned long)new | HUGEPD_OK;
 	spin_unlock(&mm->page_table_lock);
@@ -90,21 +130,22 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
 /* Base page size affects how we walk hugetlb page tables */
 #ifdef CONFIG_PPC_64K_PAGES
-#define hpmd_offset(pud, addr)		pmd_offset(pud, addr)
-#define hpmd_alloc(mm, pud, addr)	pmd_alloc(mm, pud, addr)
+#define hpmd_offset(pud, addr, h)	pmd_offset(pud, addr)
+#define hpmd_alloc(mm, pud, addr, h)	pmd_alloc(mm, pud, addr)
 #else
 static inline
-pmd_t *hpmd_offset(pud_t *pud, unsigned long addr)
+pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
 {
-	if (HPAGE_SHIFT == PAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
 		return pmd_offset(pud, addr);
 	else
 		return (pmd_t *) pud;
 }
 static inline
-pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr)
+pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
+		  struct hstate *hstate)
 {
-	if (HPAGE_SHIFT == PAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
 		return pmd_alloc(mm, pud, addr);
 	else
 		return (pmd_t *) pud;
@@ -128,8 +169,9 @@ void add_gpage(unsigned long addr, unsigned long page_size,
 }
 
 /* Moves the gigantic page addresses from the temporary list to the
- * huge_boot_pages list.  */
-int alloc_bootmem_huge_page(struct hstate *h)
+ * huge_boot_pages list.
+ */
+int alloc_bootmem_huge_page(struct hstate *hstate)
 {
 	struct huge_bootmem_page *m;
 	if (nr_gpages == 0)
@@ -137,7 +179,7 @@ int alloc_bootmem_huge_page(struct hstate *h)
 	m = phys_to_virt(gpage_freearray[--nr_gpages]);
 	gpage_freearray[nr_gpages] = 0;
 	list_add(&m->list, &huge_boot_pages);
-	m->hstate = h;
+	m->hstate = hstate;
 	return 1;
 }
 
@@ -149,17 +191,25 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	pud_t *pu;
 	pmd_t *pm;
 
-	BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+	unsigned int psize;
+	unsigned int shift;
+	unsigned long sz;
+	struct hstate *hstate;
+	psize = get_slice_psize(mm, addr);
+	shift = mmu_psize_to_shift(psize);
+	sz = ((1UL) << shift);
+	hstate = size_to_hstate(sz);
 
-	addr &= HPAGE_MASK;
+	addr &= hstate->mask;
 
 	pg = pgd_offset(mm, addr);
 	if (!pgd_none(*pg)) {
 		pu = pud_offset(pg, addr);
 		if (!pud_none(*pu)) {
-			pm = hpmd_offset(pu, addr);
+			pm = hpmd_offset(pu, addr, hstate);
 			if (!pmd_none(*pm))
-				return hugepte_offset((hugepd_t *)pm, addr);
+				return hugepte_offset((hugepd_t *)pm, addr,
+						      hstate);
 		}
 	}
 
@@ -173,16 +223,20 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 	pud_t *pu;
 	pmd_t *pm;
 	hugepd_t *hpdp = NULL;
+	struct hstate *hstate;
+	unsigned int psize;
+	hstate = size_to_hstate(sz);
 
-	BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+	psize = get_slice_psize(mm, addr);
+	BUG_ON(!mmu_huge_psizes[psize]);
 
-	addr &= HPAGE_MASK;
+	addr &= hstate->mask;
 
 	pg = pgd_offset(mm, addr);
 	pu = pud_alloc(mm, pg, addr);
 
 	if (pu) {
-		pm = hpmd_alloc(mm, pu, addr);
+		pm = hpmd_alloc(mm, pu, addr, hstate);
 		if (pm)
 			hpdp = (hugepd_t *)pm;
 	}
@@ -190,10 +244,10 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 	if (! hpdp)
 		return NULL;
 
-	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr))
+	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize))
 		return NULL;
 
-	return hugepte_offset(hpdp, addr);
+	return hugepte_offset(hpdp, addr, hstate);
 }
 
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
@@ -201,19 +255,22 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 0;
 }
 
-static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
+static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp,
+			       unsigned int psize)
 {
 	pte_t *hugepte = hugepd_page(*hpdp);
 
 	hpdp->pd = 0;
 	tlb->need_flush = 1;
-	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
+	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte,
+						 HUGEPTE_CACHE_NUM+psize-1,
 						 PGF_CACHENUM_MASK));
 }
 
 static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 				   unsigned long addr, unsigned long end,
-				   unsigned long floor, unsigned long ceiling)
+				   unsigned long floor, unsigned long ceiling,
+				   unsigned int psize)
 {
 	pmd_t *pmd;
 	unsigned long next;
@@ -225,7 +282,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 		next = pmd_addr_end(addr, end);
 		if (pmd_none(*pmd))
 			continue;
-		free_hugepte_range(tlb, (hugepd_t *)pmd);
+		free_hugepte_range(tlb, (hugepd_t *)pmd, psize);
 	} while (pmd++, addr = next, addr != end);
 
 	start &= PUD_MASK;
@@ -251,6 +308,9 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	pud_t *pud;
 	unsigned long next;
 	unsigned long start;
+	unsigned int shift;
+	unsigned int psize = get_slice_psize(tlb->mm, addr);
+	shift = mmu_psize_to_shift(psize);
 
 	start = addr;
 	pud = pud_offset(pgd, addr);
@@ -259,16 +319,18 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 #ifdef CONFIG_PPC_64K_PAGES
 		if (pud_none_or_clear_bad(pud))
 			continue;
-		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling,
+				       psize);
 #else
-		if (HPAGE_SHIFT == PAGE_SHIFT_64K) {
+		if (shift == PAGE_SHIFT_64K) {
 			if (pud_none_or_clear_bad(pud))
 				continue;
-			hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+			hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
+					       ceiling, psize);
 		} else {
 			if (pud_none(*pud))
 				continue;
-			free_hugepte_range(tlb, (hugepd_t *)pud);
+			free_hugepte_range(tlb, (hugepd_t *)pud, psize);
 		}
 #endif
 	} while (pud++, addr = next, addr != end);
@@ -336,27 +398,29 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 	 * now has no other vmas using it, so can be freed, we don't
 	 * bother to round floor or end up - the tests don't need that.
 	 */
+	unsigned int psize = get_slice_psize(tlb->mm, addr);
 
-	addr &= HUGEPD_MASK;
+	addr &= HUGEPD_MASK(psize);
 	if (addr < floor) {
-		addr += HUGEPD_SIZE;
+		addr += HUGEPD_SIZE(psize);
 		if (!addr)
 			return;
 	}
 	if (ceiling) {
-		ceiling &= HUGEPD_MASK;
+		ceiling &= HUGEPD_MASK(psize);
 		if (!ceiling)
 			return;
 	}
 	if (end - 1 > ceiling - 1)
-		end -= HUGEPD_SIZE;
+		end -= HUGEPD_SIZE(psize);
 	if (addr > end - 1)
 		return;
 
 	start = addr;
 	pgd = pgd_offset(tlb->mm, addr);
 	do {
-		BUG_ON(get_slice_psize(tlb->mm, addr) != mmu_huge_psize);
+		psize = get_slice_psize(tlb->mm, addr);
+		BUG_ON(!mmu_huge_psizes[psize]);
 		next = pgd_addr_end(addr, end);
 		if (pgd_none_or_clear_bad(pgd))
 			continue;
@@ -373,7 +437,11 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		 * necessary anymore if we make hpte_need_flush() get the
 		 * page size from the slices
 		 */
-		pte_update(mm, addr & HPAGE_MASK, ptep, ~0UL, 1);
+		unsigned int psize = get_slice_psize(mm, addr);
+		unsigned int shift = mmu_psize_to_shift(psize);
+		unsigned long sz = ((1UL) << shift);
+		struct hstate *hstate = size_to_hstate(sz);
+		pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1);
 	}
 	*ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 }
@@ -390,14 +458,19 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 {
 	pte_t *ptep;
 	struct page *page;
+	unsigned int mmu_psize = get_slice_psize(mm, address);
 
-	if (get_slice_psize(mm, address) != mmu_huge_psize)
+	/* Verify it is a huge page else bail. */
+	if (!mmu_huge_psizes[mmu_psize])
 		return ERR_PTR(-EINVAL);
 
 	ptep = huge_pte_offset(mm, address);
 	page = pte_page(*ptep);
-	if (page)
-		page += (address % HPAGE_SIZE) / PAGE_SIZE;
+	if (page) {
+		unsigned int shift = mmu_psize_to_shift(mmu_psize);
+		unsigned long sz = ((1UL) << shift);
+		page += (address % sz) / PAGE_SIZE;
+	}
 
 	return page;
 }
@@ -425,15 +498,16 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 					unsigned long len, unsigned long pgoff,
 					unsigned long flags)
 {
-	return slice_get_unmapped_area(addr, len, flags,
-				       mmu_huge_psize, 1, 0);
+	struct hstate *hstate = hstate_file(file);
+	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
 }
 
 /*
  * Called by asm hashtable.S for doing lazy icache flush
  */
 static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
-						  pte_t pte, int trap)
+					pte_t pte, int trap, unsigned long sz)
 {
 	struct page *page;
 	int i;
@@ -446,7 +520,7 @@ static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
 	/* page is dirty */
 	if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
 		if (trap == 0x400) {
-			for (i = 0; i < (HPAGE_SIZE / PAGE_SIZE); i++)
+			for (i = 0; i < (sz / PAGE_SIZE); i++)
 				__flush_dcache_icache(page_address(page+i));
 			set_bit(PG_arch_1, &page->flags);
 		} else {
@@ -462,11 +536,16 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 {
 	pte_t *ptep;
 	unsigned long old_pte, new_pte;
-	unsigned long va, rflags, pa;
+	unsigned long va, rflags, pa, sz;
 	long slot;
 	int err = 1;
 	int ssize = user_segment_size(ea);
+	unsigned int mmu_psize;
+	int shift;
+	mmu_psize = get_slice_psize(mm, ea);
 
+	if (!mmu_huge_psizes[mmu_psize])
+		goto out;
 	ptep = huge_pte_offset(mm, ea);
 
 	/* Search the Linux page table for a match with va */
@@ -509,30 +588,32 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 	rflags = 0x2 | (!(new_pte & _PAGE_RW));
  	/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
 	rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
+	shift = mmu_psize_to_shift(mmu_psize);
+	sz = ((1UL) << shift);
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
 		/* No CPU has hugepages but lacks no execute, so we
 		 * don't need to worry about that case */
 		rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte),
-						       trap);
+						       trap, sz);
 
 	/* Check if pte already has an hpte (case 2) */
 	if (unlikely(old_pte & _PAGE_HASHPTE)) {
 		/* There MIGHT be an HPTE for this pte */
 		unsigned long hash, slot;
 
-		hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+		hash = hpt_hash(va, shift, ssize);
 		if (old_pte & _PAGE_F_SECOND)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 		slot += (old_pte & _PAGE_F_GIX) >> 12;
 
-		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_huge_psize,
+		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
 					 ssize, local) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
 
 	if (likely(!(old_pte & _PAGE_HASHPTE))) {
-		unsigned long hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+		unsigned long hash = hpt_hash(va, shift, ssize);
 		unsigned long hpte_group;
 
 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
@@ -553,7 +634,7 @@ repeat:
 
 		/* Insert into the hash table, primary slot */
 		slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
-					  mmu_huge_psize, ssize);
+					  mmu_psize, ssize);
 
 		/* Primary is full, try the secondary */
 		if (unlikely(slot == -1)) {
@@ -561,7 +642,7 @@ repeat:
 				      HPTES_PER_GROUP) & ~0x7UL; 
 			slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
 						  HPTE_V_SECONDARY,
-						  mmu_huge_psize, ssize);
+						  mmu_psize, ssize);
 			if (slot == -1) {
 				if (mftb() & 0x1)
 					hpte_group = ((hash & htab_hash_mask) *
@@ -598,66 +679,50 @@ void set_huge_psize(int psize)
 		(mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
 		 mmu_psize_defs[psize].shift == PAGE_SHIFT_64K ||
 		 mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) {
-		/* Return if huge page size is the same as the
-		 * base page size. */
-		if (mmu_psize_defs[psize].shift == PAGE_SHIFT)
+		/* Return if huge page size has already been setup or is the
+		 * same as the base page size. */
+		if (mmu_huge_psizes[psize] ||
+		   mmu_psize_defs[psize].shift == PAGE_SHIFT)
 			return;
+		hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
 
-		HPAGE_SHIFT = mmu_psize_defs[psize].shift;
-		mmu_huge_psize = psize;
-
-		switch (HPAGE_SHIFT) {
+		switch (mmu_psize_defs[psize].shift) {
 		case PAGE_SHIFT_64K:
 		    /* We only allow 64k hpages with 4k base page,
 		     * which was checked above, and always put them
 		     * at the PMD */
-		    hugepte_shift = PMD_SHIFT;
+		    hugepte_shift[psize] = PMD_SHIFT;
 		    break;
 		case PAGE_SHIFT_16M:
 		    /* 16M pages can be at two different levels
 		     * of pagestables based on base page size */
 		    if (PAGE_SHIFT == PAGE_SHIFT_64K)
-			    hugepte_shift = PMD_SHIFT;
+			    hugepte_shift[psize] = PMD_SHIFT;
 		    else /* 4k base page */
-			    hugepte_shift = PUD_SHIFT;
+			    hugepte_shift[psize] = PUD_SHIFT;
 		    break;
 		case PAGE_SHIFT_16G:
 		    /* 16G pages are always at PGD level */
-		    hugepte_shift = PGDIR_SHIFT;
+		    hugepte_shift[psize] = PGDIR_SHIFT;
 		    break;
 		}
-		hugepte_shift -= HPAGE_SHIFT;
+		hugepte_shift[psize] -= mmu_psize_defs[psize].shift;
 	} else
-		HPAGE_SHIFT = 0;
+		hugepte_shift[psize] = 0;
 }
 
 static int __init hugepage_setup_sz(char *str)
 {
 	unsigned long long size;
-	int mmu_psize = -1;
+	int mmu_psize;
 	int shift;
 
 	size = memparse(str, &str);
 
 	shift = __ffs(size);
-	switch (shift) {
-#ifndef CONFIG_PPC_64K_PAGES
-	case PAGE_SHIFT_64K:
-		mmu_psize = MMU_PAGE_64K;
-		break;
-#endif
-	case PAGE_SHIFT_16M:
-		mmu_psize = MMU_PAGE_16M;
-		break;
-	case PAGE_SHIFT_16G:
-		mmu_psize = MMU_PAGE_16G;
-		break;
-	}
-
-	if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift) {
+	mmu_psize = shift_to_mmu_psize(shift);
+	if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift)
 		set_huge_psize(mmu_psize);
-		hugetlb_add_hstate(shift - PAGE_SHIFT);
-	}
 	else
 		printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
 
@@ -672,16 +737,31 @@ static void zero_ctor(struct kmem_cache *cache, void *addr)
 
 static int __init hugetlbpage_init(void)
 {
+	unsigned int psize;
+
 	if (!cpu_has_feature(CPU_FTR_16M_PAGE))
 		return -ENODEV;
-
-	huge_pgtable_cache = kmem_cache_create("hugepte_cache",
-					       HUGEPTE_TABLE_SIZE,
-					       HUGEPTE_TABLE_SIZE,
-					       0,
-					       zero_ctor);
-	if (! huge_pgtable_cache)
-		panic("hugetlbpage_init(): could not create hugepte cache\n");
+	/* Add supported huge page sizes.  Need to change HUGE_MAX_HSTATE
+	 * and adjust PTE_NONCACHE_NUM if the number of supported huge page
+	 * sizes changes.
+	 */
+	set_huge_psize(MMU_PAGE_16M);
+	set_huge_psize(MMU_PAGE_64K);
+	set_huge_psize(MMU_PAGE_16G);
+
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+		if (mmu_huge_psizes[psize]) {
+			huge_pgtable_cache(psize) = kmem_cache_create(
+						HUGEPTE_CACHE_NAME(psize),
+						HUGEPTE_TABLE_SIZE(psize),
+						HUGEPTE_TABLE_SIZE(psize),
+						0,
+						zero_ctor);
+			if (!huge_pgtable_cache(psize))
+				panic("hugetlbpage_init(): could not create %s"\
+				      "\n", HUGEPTE_CACHE_NAME(psize));
+		}
+	}
 
 	return 0;
 }
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 6ef63caca68..a41bc5aa204 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -153,10 +153,10 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
 };
 
 #ifdef CONFIG_HUGETLB_PAGE
-/* Hugepages need one extra cache, initialized in hugetlbpage.c.  We
- * can't put into the tables above, because HPAGE_SHIFT is not compile
- * time constant. */
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1];
+/* Hugepages need an extra cache per hugepagesize, initialized in
+ * hugetlbpage.c.  We can't put into the tables above, because HPAGE_SHIFT
+ * is not compile time constant. */
+struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT];
 #else
 struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
 #endif
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index a01b5c608ff..409fcc7b63c 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -147,7 +147,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	 */
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
-		psize = mmu_huge_psize;
+		psize = get_slice_psize(mm, addr);;
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h
index ca37c4af27b..26f0d0ab27a 100644
--- a/include/asm-powerpc/hugetlb.h
+++ b/include/asm-powerpc/hugetlb.h
@@ -24,9 +24,10 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
 static inline int prepare_hugepage_range(struct file *file,
 			unsigned long addr, unsigned long len)
 {
-	if (len & ~HPAGE_MASK)
+	struct hstate *h = hstate_file(file);
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
-	if (addr & ~HPAGE_MASK)
+	if (addr & ~huge_page_mask(h))
 		return -EINVAL;
 	return 0;
 }
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
index b61181aa774..19c7a940349 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/include/asm-powerpc/mmu-hash64.h
@@ -194,9 +194,9 @@ extern int mmu_ci_restrictions;
 
 #ifdef CONFIG_HUGETLB_PAGE
 /*
- * The page size index of the huge pages for use by hugetlbfs
+ * The page size indexes of the huge pages for use by hugetlbfs
  */
-extern int mmu_huge_psize;
+extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT];
 
 #endif /* CONFIG_HUGETLB_PAGE */
 
diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h
index 02fd80710e9..043bfdfe4f7 100644
--- a/include/asm-powerpc/page_64.h
+++ b/include/asm-powerpc/page_64.h
@@ -90,6 +90,7 @@ extern unsigned int HPAGE_SHIFT;
 #define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HUGE_MAX_HSTATE		3
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/include/asm-powerpc/pgalloc-64.h b/include/asm-powerpc/pgalloc-64.h
index 68980990f62..812a1d8f35c 100644
--- a/include/asm-powerpc/pgalloc-64.h
+++ b/include/asm-powerpc/pgalloc-64.h
@@ -22,7 +22,7 @@ extern struct kmem_cache *pgtable_cache[];
 #define PUD_CACHE_NUM		1
 #define PMD_CACHE_NUM		1
 #define HUGEPTE_CACHE_NUM	2
-#define PTE_NONCACHE_NUM	3  /* from GFP rather than kmem_cache */
+#define PTE_NONCACHE_NUM	7  /* from GFP rather than kmem_cache */
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
@@ -119,7 +119,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
 	__free_page(ptepage);
 }
 
-#define PGF_CACHENUM_MASK	0x3
+#define PGF_CACHENUM_MASK	0x7
 
 typedef struct pgtable_free {
 	unsigned long val;
-- 
cgit v1.2.3


From 7f09ca51e925ba62e9ebfd4979f093e97e38adeb Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 23 Jul 2008 21:27:58 -0700
Subject: hugetlb: fix a hugepage reservation check for MAP_SHARED

When removing a huge page from the hugepage pool for a fault the system checks
to see if the mapping requires additional pages to be reserved, and if it does
whether there are any unreserved pages remaining.  If not, the allocation
fails without even attempting to get a page.  In order to determine whether to
apply this check we call vma_has_private_reserves() which tells us if this vma
is MAP_PRIVATE and is the owner.  This incorrectly triggers the remaining
reservation test for MAP_SHARED mappings which prevents allocation of the
final page in the pool even though it is reserved for this mapping.

In reality we only want to check this for MAP_PRIVATE mappings where the
process is not the original mapper.  Replace vma_has_private_reserves() with
vma_has_reserves() which indicates whether further reserves are required, and
update the caller.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 3e1506b808a..8c20aed62b9 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -342,13 +342,13 @@ void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
 }
 
 /* Returns true if the VMA has associated reserve pages */
-static int vma_has_private_reserves(struct vm_area_struct *vma)
+static int vma_has_reserves(struct vm_area_struct *vma)
 {
 	if (vma->vm_flags & VM_SHARED)
-		return 0;
-	if (!is_vma_resv_set(vma, HPAGE_RESV_OWNER))
-		return 0;
-	return 1;
+		return 1;
+	if (is_vma_resv_set(vma, HPAGE_RESV_OWNER))
+		return 1;
+	return 0;
 }
 
 static void clear_huge_page(struct page *page,
@@ -420,7 +420,7 @@ static struct page *dequeue_huge_page_vma(struct hstate *h,
 	 * have no page reserves. This check ensures that reservations are
 	 * not "stolen". The child may still get SIGKILLed
 	 */
-	if (!vma_has_private_reserves(vma) &&
+	if (!vma_has_reserves(vma) &&
 			h->free_huge_pages - h->resv_huge_pages == 0)
 		return NULL;
 
-- 
cgit v1.2.3


From 7251ff78b94c2a68d267623d09b32672b20662c1 Mon Sep 17 00:00:00 2001
From: Adam Litke <agl@us.ibm.com>
Date: Wed, 23 Jul 2008 21:27:59 -0700
Subject: hugetlb: quota is not freed for unused reserved private huge pages

With shared reservations (and now also with private reservations), we reserve
huge pages at mmap time.  We also account for the mapping against fs quota to
prevent a reservation from being preempted by quota exhaustion.

When testing with the libhugetlbfs test suite, I found a problem with quota
accounting.  FS quota for allocated pages is handled correctly but we are not
releasing quota for private pages that were reserved but never allocated.  Do
this in hugetlb_vm_op_close() at the same time as unused page reservations are
released.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 8c20aed62b9..41341c41419 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1552,8 +1552,10 @@ static void hugetlb_vm_op_close(struct vm_area_struct *vma)
 
 		kref_put(&reservations->refs, resv_map_release);
 
-		if (reserve)
+		if (reserve) {
 			hugetlb_acct_memory(h, -reserve);
+			hugetlb_put_quota(vma->vm_file->f_mapping, reserve);
+		}
 	}
 }
 
-- 
cgit v1.2.3


From 223e8dc9249c9e15f6c8b638d73fcad78ccb0a88 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:00 -0700
Subject: bootmem: reorder code to match new bootmem structure

This only reorders functions so that further patches will be easier to
read.  No code changed.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/bootmem.h |  86 ++++++------
 mm/bootmem.c            | 356 ++++++++++++++++++++++++------------------------
 2 files changed, 222 insertions(+), 220 deletions(-)

diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index f352c5f125b..5000fd70b04 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -41,36 +41,62 @@ typedef struct bootmem_data {
 extern bootmem_data_t bootmem_node_data[];
 
 extern unsigned long bootmem_bootmap_pages(unsigned long);
+
+extern unsigned long init_bootmem_node(pg_data_t *pgdat,
+				       unsigned long freepfn,
+				       unsigned long startpfn,
+				       unsigned long endpfn);
 extern unsigned long init_bootmem(unsigned long addr, unsigned long memend);
+
+extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
+extern unsigned long free_all_bootmem(void);
+
+extern void free_bootmem_node(pg_data_t *pgdat,
+			      unsigned long addr,
+			      unsigned long size);
 extern void free_bootmem(unsigned long addr, unsigned long size);
-extern void *__alloc_bootmem(unsigned long size,
+
+/*
+ * Flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE,
+ * the architecture-specific code should honor this).
+ *
+ * If flags is 0, then the return value is always 0 (success). If
+ * flags contains BOOTMEM_EXCLUSIVE, then -EBUSY is returned if the
+ * memory already was reserved.
+ */
+#define BOOTMEM_DEFAULT		0
+#define BOOTMEM_EXCLUSIVE	(1<<0)
+
+extern int reserve_bootmem_node(pg_data_t *pgdat,
+				 unsigned long physaddr,
+				 unsigned long size,
+				 int flags);
+#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
+extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags);
+#endif
+
+extern void *__alloc_bootmem_nopanic(unsigned long size,
 			     unsigned long align,
 			     unsigned long goal);
-extern void *__alloc_bootmem_nopanic(unsigned long size,
+extern void *__alloc_bootmem(unsigned long size,
 				     unsigned long align,
 				     unsigned long goal);
 extern void *__alloc_bootmem_low(unsigned long size,
 				 unsigned long align,
 				 unsigned long goal);
+extern void *__alloc_bootmem_node(pg_data_t *pgdat,
+				  unsigned long size,
+				  unsigned long align,
+				  unsigned long goal);
+extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+				  unsigned long size,
+				  unsigned long align,
+				  unsigned long goal);
 extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 				      unsigned long size,
 				      unsigned long align,
 				      unsigned long goal);
-
-/*
- * flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE,
- * the architecture-specific code should honor this)
- */
-#define BOOTMEM_DEFAULT		0
-#define BOOTMEM_EXCLUSIVE	(1<<0)
-
 #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
-/*
- * If flags is 0, then the return value is always 0 (success). If
- * flags contains BOOTMEM_EXCLUSIVE, then -EBUSY is returned if the
- * memory already was reserved.
- */
-extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags);
 #define alloc_bootmem(x) \
 	__alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low(x) \
@@ -83,38 +109,16 @@ extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags);
 
 extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
 				   int flags);
-extern unsigned long free_all_bootmem(void);
-extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
-extern void *__alloc_bootmem_node(pg_data_t *pgdat,
-				  unsigned long size,
-				  unsigned long align,
-				  unsigned long goal);
-extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat,
-				  unsigned long size,
-				  unsigned long align,
-				  unsigned long goal);
-extern unsigned long init_bootmem_node(pg_data_t *pgdat,
-				       unsigned long freepfn,
-				       unsigned long startpfn,
-				       unsigned long endpfn);
-extern int reserve_bootmem_node(pg_data_t *pgdat,
-				 unsigned long physaddr,
-				 unsigned long size,
-				 int flags);
-extern void free_bootmem_node(pg_data_t *pgdat,
-			      unsigned long addr,
-			      unsigned long size);
-extern void *alloc_bootmem_section(unsigned long size,
-				   unsigned long section_nr);
 
-#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
 #define alloc_bootmem_node(pgdat, x) \
 	__alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_pages_node(pgdat, x) \
 	__alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages_node(pgdat, x) \
 	__alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0)
-#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
+
+extern void *alloc_bootmem_section(unsigned long size,
+				   unsigned long section_nr);
 
 #ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP
 extern void *alloc_remap(int nid, unsigned long size);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 9ac972535ff..24eacf52c50 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -38,6 +38,19 @@ unsigned long saved_max_pfn;
 
 bootmem_data_t bootmem_node_data[MAX_NUMNODES] __initdata;
 
+/*
+ * Given an initialised bdata, it returns the size of the boot bitmap
+ */
+static unsigned long __init get_mapsize(bootmem_data_t *bdata)
+{
+	unsigned long mapsize;
+	unsigned long start = PFN_DOWN(bdata->node_boot_start);
+	unsigned long end = bdata->node_low_pfn;
+
+	mapsize = ((end - start) + 7) / 8;
+	return ALIGN(mapsize, sizeof(long));
+}
+
 /* return the number of _pages_ that will be allocated for the boot bitmap */
 unsigned long __init bootmem_bootmap_pages(unsigned long pages)
 {
@@ -71,19 +84,6 @@ static void __init link_bootmem(bootmem_data_t *bdata)
 	list_add_tail(&bdata->list, &bdata_list);
 }
 
-/*
- * Given an initialised bdata, it returns the size of the boot bitmap
- */
-static unsigned long __init get_mapsize(bootmem_data_t *bdata)
-{
-	unsigned long mapsize;
-	unsigned long start = PFN_DOWN(bdata->node_boot_start);
-	unsigned long end = bdata->node_low_pfn;
-
-	mapsize = ((end - start) + 7) / 8;
-	return ALIGN(mapsize, sizeof(long));
-}
-
 /*
  * Called once to set up the allocator itself.
  */
@@ -108,6 +108,146 @@ static unsigned long __init init_bootmem_core(bootmem_data_t *bdata,
 	return mapsize;
 }
 
+unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn,
+				unsigned long startpfn, unsigned long endpfn)
+{
+	return init_bootmem_core(pgdat->bdata, freepfn, startpfn, endpfn);
+}
+
+unsigned long __init init_bootmem(unsigned long start, unsigned long pages)
+{
+	max_low_pfn = pages;
+	min_low_pfn = start;
+	return init_bootmem_core(NODE_DATA(0)->bdata, start, 0, pages);
+}
+
+static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
+{
+	struct page *page;
+	unsigned long pfn;
+	unsigned long i, count;
+	unsigned long idx;
+	unsigned long *map;
+	int gofast = 0;
+
+	BUG_ON(!bdata->node_bootmem_map);
+
+	count = 0;
+	/* first extant page of the node */
+	pfn = PFN_DOWN(bdata->node_boot_start);
+	idx = bdata->node_low_pfn - pfn;
+	map = bdata->node_bootmem_map;
+	/*
+	 * Check if we are aligned to BITS_PER_LONG pages.  If so, we might
+	 * be able to free page orders of that size at once.
+	 */
+	if (!(pfn & (BITS_PER_LONG-1)))
+		gofast = 1;
+
+	for (i = 0; i < idx; ) {
+		unsigned long v = ~map[i / BITS_PER_LONG];
+
+		if (gofast && v == ~0UL) {
+			int order;
+
+			page = pfn_to_page(pfn);
+			count += BITS_PER_LONG;
+			order = ffs(BITS_PER_LONG) - 1;
+			__free_pages_bootmem(page, order);
+			i += BITS_PER_LONG;
+			page += BITS_PER_LONG;
+		} else if (v) {
+			unsigned long m;
+
+			page = pfn_to_page(pfn);
+			for (m = 1; m && i < idx; m<<=1, page++, i++) {
+				if (v & m) {
+					count++;
+					__free_pages_bootmem(page, 0);
+				}
+			}
+		} else {
+			i += BITS_PER_LONG;
+		}
+		pfn += BITS_PER_LONG;
+	}
+
+	/*
+	 * Now free the allocator bitmap itself, it's not
+	 * needed anymore:
+	 */
+	page = virt_to_page(bdata->node_bootmem_map);
+	idx = (get_mapsize(bdata) + PAGE_SIZE-1) >> PAGE_SHIFT;
+	for (i = 0; i < idx; i++, page++)
+		__free_pages_bootmem(page, 0);
+	count += i;
+	bdata->node_bootmem_map = NULL;
+
+	return count;
+}
+
+unsigned long __init free_all_bootmem_node(pg_data_t *pgdat)
+{
+	register_page_bootmem_info_node(pgdat);
+	return free_all_bootmem_core(pgdat->bdata);
+}
+
+unsigned long __init free_all_bootmem(void)
+{
+	return free_all_bootmem_core(NODE_DATA(0)->bdata);
+}
+
+static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
+				     unsigned long size)
+{
+	unsigned long sidx, eidx;
+	unsigned long i;
+
+	BUG_ON(!size);
+
+	/* out range */
+	if (addr + size < bdata->node_boot_start ||
+		PFN_DOWN(addr) > bdata->node_low_pfn)
+		return;
+	/*
+	 * round down end of usable mem, partially free pages are
+	 * considered reserved.
+	 */
+
+	if (addr >= bdata->node_boot_start && addr < bdata->last_success)
+		bdata->last_success = addr;
+
+	/*
+	 * Round up to index to the range.
+	 */
+	if (PFN_UP(addr) > PFN_DOWN(bdata->node_boot_start))
+		sidx = PFN_UP(addr) - PFN_DOWN(bdata->node_boot_start);
+	else
+		sidx = 0;
+
+	eidx = PFN_DOWN(addr + size - bdata->node_boot_start);
+	if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
+		eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
+
+	for (i = sidx; i < eidx; i++) {
+		if (unlikely(!test_and_clear_bit(i, bdata->node_bootmem_map)))
+			BUG();
+	}
+}
+
+void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
+			      unsigned long size)
+{
+	free_bootmem_core(pgdat->bdata, physaddr, size);
+}
+
+void __init free_bootmem(unsigned long addr, unsigned long size)
+{
+	bootmem_data_t *bdata;
+	list_for_each_entry(bdata, &bdata_list, list)
+		free_bootmem_core(bdata, addr, size);
+}
+
 /*
  * Marks a particular physical memory range as unallocatable. Usable RAM
  * might be used for boot-time allocations - or it might get added
@@ -183,43 +323,36 @@ static void __init reserve_bootmem_core(bootmem_data_t *bdata,
 	}
 }
 
-static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
-				     unsigned long size)
+int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
+				 unsigned long size, int flags)
 {
-	unsigned long sidx, eidx;
-	unsigned long i;
-
-	BUG_ON(!size);
-
-	/* out range */
-	if (addr + size < bdata->node_boot_start ||
-		PFN_DOWN(addr) > bdata->node_low_pfn)
-		return;
-	/*
-	 * round down end of usable mem, partially free pages are
-	 * considered reserved.
-	 */
-
-	if (addr >= bdata->node_boot_start && addr < bdata->last_success)
-		bdata->last_success = addr;
+	int ret;
 
-	/*
-	 * Round up to index to the range.
-	 */
-	if (PFN_UP(addr) > PFN_DOWN(bdata->node_boot_start))
-		sidx = PFN_UP(addr) - PFN_DOWN(bdata->node_boot_start);
-	else
-		sidx = 0;
+	ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
+	if (ret < 0)
+		return -ENOMEM;
+	reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
+	return 0;
+}
 
-	eidx = PFN_DOWN(addr + size - bdata->node_boot_start);
-	if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
-		eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
+#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
+int __init reserve_bootmem(unsigned long addr, unsigned long size,
+			    int flags)
+{
+	bootmem_data_t *bdata;
+	int ret;
 
-	for (i = sidx; i < eidx; i++) {
-		if (unlikely(!test_and_clear_bit(i, bdata->node_bootmem_map)))
-			BUG();
+	list_for_each_entry(bdata, &bdata_list, list) {
+		ret = can_reserve_bootmem_core(bdata, addr, size, flags);
+		if (ret < 0)
+			return ret;
 	}
+	list_for_each_entry(bdata, &bdata_list, list)
+		reserve_bootmem_core(bdata, addr, size, flags);
+
+	return 0;
 }
+#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 
 /*
  * We 'merge' subsequent allocations to save space. We might 'lose'
@@ -371,140 +504,6 @@ found:
 	return ret;
 }
 
-static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
-{
-	struct page *page;
-	unsigned long pfn;
-	unsigned long i, count;
-	unsigned long idx;
-	unsigned long *map; 
-	int gofast = 0;
-
-	BUG_ON(!bdata->node_bootmem_map);
-
-	count = 0;
-	/* first extant page of the node */
-	pfn = PFN_DOWN(bdata->node_boot_start);
-	idx = bdata->node_low_pfn - pfn;
-	map = bdata->node_bootmem_map;
-	/*
-	 * Check if we are aligned to BITS_PER_LONG pages.  If so, we might
-	 * be able to free page orders of that size at once.
-	 */
-	if (!(pfn & (BITS_PER_LONG-1)))
-		gofast = 1;
-
-	for (i = 0; i < idx; ) {
-		unsigned long v = ~map[i / BITS_PER_LONG];
-
-		if (gofast && v == ~0UL) {
-			int order;
-
-			page = pfn_to_page(pfn);
-			count += BITS_PER_LONG;
-			order = ffs(BITS_PER_LONG) - 1;
-			__free_pages_bootmem(page, order);
-			i += BITS_PER_LONG;
-			page += BITS_PER_LONG;
-		} else if (v) {
-			unsigned long m;
-
-			page = pfn_to_page(pfn);
-			for (m = 1; m && i < idx; m<<=1, page++, i++) {
-				if (v & m) {
-					count++;
-					__free_pages_bootmem(page, 0);
-				}
-			}
-		} else {
-			i += BITS_PER_LONG;
-		}
-		pfn += BITS_PER_LONG;
-	}
-
-	/*
-	 * Now free the allocator bitmap itself, it's not
-	 * needed anymore:
-	 */
-	page = virt_to_page(bdata->node_bootmem_map);
-	idx = (get_mapsize(bdata) + PAGE_SIZE-1) >> PAGE_SHIFT;
-	for (i = 0; i < idx; i++, page++)
-		__free_pages_bootmem(page, 0);
-	count += i;
-	bdata->node_bootmem_map = NULL;
-
-	return count;
-}
-
-unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn,
-				unsigned long startpfn, unsigned long endpfn)
-{
-	return init_bootmem_core(pgdat->bdata, freepfn, startpfn, endpfn);
-}
-
-int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
-				 unsigned long size, int flags)
-{
-	int ret;
-
-	ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
-	if (ret < 0)
-		return -ENOMEM;
-	reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
-
-	return 0;
-}
-
-void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
-			      unsigned long size)
-{
-	free_bootmem_core(pgdat->bdata, physaddr, size);
-}
-
-unsigned long __init free_all_bootmem_node(pg_data_t *pgdat)
-{
-	register_page_bootmem_info_node(pgdat);
-	return free_all_bootmem_core(pgdat->bdata);
-}
-
-unsigned long __init init_bootmem(unsigned long start, unsigned long pages)
-{
-	max_low_pfn = pages;
-	min_low_pfn = start;
-	return init_bootmem_core(NODE_DATA(0)->bdata, start, 0, pages);
-}
-
-#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
-int __init reserve_bootmem(unsigned long addr, unsigned long size,
-			    int flags)
-{
-	bootmem_data_t *bdata;
-	int ret;
-
-	list_for_each_entry(bdata, &bdata_list, list) {
-		ret = can_reserve_bootmem_core(bdata, addr, size, flags);
-		if (ret < 0)
-			return ret;
-	}
-	list_for_each_entry(bdata, &bdata_list, list)
-		reserve_bootmem_core(bdata, addr, size, flags);
-
-	return 0;
-}
-#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
-
-void __init free_bootmem(unsigned long addr, unsigned long size)
-{
-	bootmem_data_t *bdata;
-	list_for_each_entry(bdata, &bdata_list, list)
-		free_bootmem_core(bdata, addr, size);
-}
-
-unsigned long __init free_all_bootmem(void)
-{
-	return free_all_bootmem_core(NODE_DATA(0)->bdata);
-}
-
 void * __init __alloc_bootmem_nopanic(unsigned long size, unsigned long align,
 				      unsigned long goal)
 {
@@ -534,7 +533,6 @@ void * __init __alloc_bootmem(unsigned long size, unsigned long align,
 	return NULL;
 }
 
-
 void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 				   unsigned long align, unsigned long goal)
 {
-- 
cgit v1.2.3


From 57cfc29efac6670355ee0e107c8dbae8237d406b Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:00 -0700
Subject: bootmem: clean up bootmem.c file header

Change the description, move a misplaced comment about the allocator
itself and add me to the list of copyright holders.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 24eacf52c50..286e12c536a 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -1,12 +1,12 @@
 /*
- *  linux/mm/bootmem.c
+ *  bootmem - A boot-time physical memory allocator and configurator
  *
  *  Copyright (C) 1999 Ingo Molnar
- *  Discontiguous memory support, Kanoj Sarcar, SGI, Nov 1999
+ *                1999 Kanoj Sarcar, SGI
+ *                2008 Johannes Weiner
  *
- *  simple boot-time physical memory area allocator and
- *  free memory collector. It's used to deal with reserved
- *  system memory and memory holes as well.
+ * Access to this subsystem has to be serialized externally (which is true
+ * for the boot process anyway).
  */
 #include <linux/init.h>
 #include <linux/pfn.h>
@@ -19,10 +19,6 @@
 
 #include "internal.h"
 
-/*
- * Access to this subsystem has to be serialized externally. (this is
- * true for the boot process anyway)
- */
 unsigned long max_low_pfn;
 unsigned long min_low_pfn;
 unsigned long max_pfn;
-- 
cgit v1.2.3


From a66fd7daec1f40c1f0eac466f0da9206b615fe2a Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:01 -0700
Subject: bootmem: add documentation to API functions

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 149 insertions(+), 1 deletion(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 286e12c536a..105ad4cff2e 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -47,7 +47,10 @@ static unsigned long __init get_mapsize(bootmem_data_t *bdata)
 	return ALIGN(mapsize, sizeof(long));
 }
 
-/* return the number of _pages_ that will be allocated for the boot bitmap */
+/**
+ * bootmem_bootmap_pages - calculate bitmap size in pages
+ * @pages: number of pages the bitmap has to represent
+ */
 unsigned long __init bootmem_bootmap_pages(unsigned long pages)
 {
 	unsigned long mapsize;
@@ -104,12 +107,28 @@ static unsigned long __init init_bootmem_core(bootmem_data_t *bdata,
 	return mapsize;
 }
 
+/**
+ * init_bootmem_node - register a node as boot memory
+ * @pgdat: node to register
+ * @freepfn: pfn where the bitmap for this node is to be placed
+ * @startpfn: first pfn on the node
+ * @endpfn: first pfn after the node
+ *
+ * Returns the number of bytes needed to hold the bitmap for this node.
+ */
 unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn,
 				unsigned long startpfn, unsigned long endpfn)
 {
 	return init_bootmem_core(pgdat->bdata, freepfn, startpfn, endpfn);
 }
 
+/**
+ * init_bootmem - register boot memory
+ * @start: pfn where the bitmap is to be placed
+ * @pages: number of available physical pages
+ *
+ * Returns the number of bytes needed to hold the bitmap.
+ */
 unsigned long __init init_bootmem(unsigned long start, unsigned long pages)
 {
 	max_low_pfn = pages;
@@ -182,12 +201,23 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 	return count;
 }
 
+/**
+ * free_all_bootmem_node - release a node's free pages to the buddy allocator
+ * @pgdat: node to be released
+ *
+ * Returns the number of pages actually released.
+ */
 unsigned long __init free_all_bootmem_node(pg_data_t *pgdat)
 {
 	register_page_bootmem_info_node(pgdat);
 	return free_all_bootmem_core(pgdat->bdata);
 }
 
+/**
+ * free_all_bootmem - release free pages to the buddy allocator
+ *
+ * Returns the number of pages actually released.
+ */
 unsigned long __init free_all_bootmem(void)
 {
 	return free_all_bootmem_core(NODE_DATA(0)->bdata);
@@ -231,12 +261,32 @@ static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
 	}
 }
 
+/**
+ * free_bootmem_node - mark a page range as usable
+ * @pgdat: node the range resides on
+ * @physaddr: starting address of the range
+ * @size: size of the range in bytes
+ *
+ * Partial pages will be considered reserved and left as they are.
+ *
+ * Only physical pages that actually reside on @pgdat are marked.
+ */
 void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 			      unsigned long size)
 {
 	free_bootmem_core(pgdat->bdata, physaddr, size);
 }
 
+/**
+ * free_bootmem - mark a page range as usable
+ * @addr: starting address of the range
+ * @size: size of the range in bytes
+ *
+ * Partial pages will be considered reserved and left as they are.
+ *
+ * All physical pages within the range are marked, no matter what
+ * node they reside on.
+ */
 void __init free_bootmem(unsigned long addr, unsigned long size)
 {
 	bootmem_data_t *bdata;
@@ -319,6 +369,17 @@ static void __init reserve_bootmem_core(bootmem_data_t *bdata,
 	}
 }
 
+/**
+ * reserve_bootmem_node - mark a page range as reserved
+ * @pgdat: node the range resides on
+ * @physaddr: starting address of the range
+ * @size: size of the range in bytes
+ * @flags: reservation flags (see linux/bootmem.h)
+ *
+ * Partial pages will be reserved.
+ *
+ * Only physical pages that actually reside on @pgdat are marked.
+ */
 int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 				 unsigned long size, int flags)
 {
@@ -332,6 +393,17 @@ int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 }
 
 #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
+/**
+ * reserve_bootmem - mark a page range as usable
+ * @addr: starting address of the range
+ * @size: size of the range in bytes
+ * @flags: reservation flags (see linux/bootmem.h)
+ *
+ * Partial pages will be reserved.
+ *
+ * All physical pages within the range are marked, no matter what
+ * node they reside on.
+ */
 int __init reserve_bootmem(unsigned long addr, unsigned long size,
 			    int flags)
 {
@@ -500,6 +572,19 @@ found:
 	return ret;
 }
 
+/**
+ * __alloc_bootmem_nopanic - allocate boot memory without panicking
+ * @size: size of the request in bytes
+ * @align: alignment of the region
+ * @goal: preferred starting address of the region
+ *
+ * The goal is dropped if it can not be satisfied and the allocation will
+ * fall back to memory below @goal.
+ *
+ * Allocation may happen on any node in the system.
+ *
+ * Returns NULL on failure.
+ */
 void * __init __alloc_bootmem_nopanic(unsigned long size, unsigned long align,
 				      unsigned long goal)
 {
@@ -514,6 +599,19 @@ void * __init __alloc_bootmem_nopanic(unsigned long size, unsigned long align,
 	return NULL;
 }
 
+/**
+ * __alloc_bootmem - allocate boot memory
+ * @size: size of the request in bytes
+ * @align: alignment of the region
+ * @goal: preferred starting address of the region
+ *
+ * The goal is dropped if it can not be satisfied and the allocation will
+ * fall back to memory below @goal.
+ *
+ * Allocation may happen on any node in the system.
+ *
+ * The function panics if the request can not be satisfied.
+ */
 void * __init __alloc_bootmem(unsigned long size, unsigned long align,
 			      unsigned long goal)
 {
@@ -529,6 +627,21 @@ void * __init __alloc_bootmem(unsigned long size, unsigned long align,
 	return NULL;
 }
 
+/**
+ * __alloc_bootmem_node - allocate boot memory from a specific node
+ * @pgdat: node to allocate from
+ * @size: size of the request in bytes
+ * @align: alignment of the region
+ * @goal: preferred starting address of the region
+ *
+ * The goal is dropped if it can not be satisfied and the allocation will
+ * fall back to memory below @goal.
+ *
+ * Allocation may fall back to any node in the system if the specified node
+ * can not hold the requested memory.
+ *
+ * The function panics if the request can not be satisfied.
+ */
 void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 				   unsigned long align, unsigned long goal)
 {
@@ -542,6 +655,13 @@ void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 }
 
 #ifdef CONFIG_SPARSEMEM
+/**
+ * alloc_bootmem_section - allocate boot memory from a specific section
+ * @size: size of the request in bytes
+ * @section_nr: sparse map section to allocate from
+ *
+ * Return NULL on failure.
+ */
 void * __init alloc_bootmem_section(unsigned long size,
 				    unsigned long section_nr)
 {
@@ -588,6 +708,19 @@ void * __init __alloc_bootmem_node_nopanic(pg_data_t *pgdat, unsigned long size,
 #define ARCH_LOW_ADDRESS_LIMIT	0xffffffffUL
 #endif
 
+/**
+ * __alloc_bootmem_low - allocate low boot memory
+ * @size: size of the request in bytes
+ * @align: alignment of the region
+ * @goal: preferred starting address of the region
+ *
+ * The goal is dropped if it can not be satisfied and the allocation will
+ * fall back to memory below @goal.
+ *
+ * Allocation may happen on any node in the system.
+ *
+ * The function panics if the request can not be satisfied.
+ */
 void * __init __alloc_bootmem_low(unsigned long size, unsigned long align,
 				  unsigned long goal)
 {
@@ -609,6 +742,21 @@ void * __init __alloc_bootmem_low(unsigned long size, unsigned long align,
 	return NULL;
 }
 
+/**
+ * __alloc_bootmem_low_node - allocate low boot memory from a specific node
+ * @pgdat: node to allocate from
+ * @size: size of the request in bytes
+ * @align: alignment of the region
+ * @goal: preferred starting address of the region
+ *
+ * The goal is dropped if it can not be satisfied and the allocation will
+ * fall back to memory below @goal.
+ *
+ * Allocation may fall back to any node in the system if the specified node
+ * can not hold the requested memory.
+ *
+ * The function panics if the request can not be satisfied.
+ */
 void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
 				       unsigned long align, unsigned long goal)
 {
-- 
cgit v1.2.3


From 2e5237daf0cc3c8d87762f53f704dc54fa91dcf6 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:02 -0700
Subject: bootmem: add debugging framework

Introduce the bootmem_debug kernel parameter that enables very verbose
diagnostics regarding all range operations of bootmem as well as the
initialization and release of nodes.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 51 ++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 44 insertions(+), 7 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 105ad4cff2e..4e085ee1d98 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -34,6 +34,22 @@ unsigned long saved_max_pfn;
 
 bootmem_data_t bootmem_node_data[MAX_NUMNODES] __initdata;
 
+static int bootmem_debug;
+
+static int __init bootmem_debug_setup(char *buf)
+{
+	bootmem_debug = 1;
+	return 0;
+}
+early_param("bootmem_debug", bootmem_debug_setup);
+
+#define bdebug(fmt, args...) ({				\
+	if (unlikely(bootmem_debug))			\
+		printk(KERN_INFO			\
+			"bootmem::%s " fmt,		\
+			__FUNCTION__, ## args);		\
+})
+
 /*
  * Given an initialised bdata, it returns the size of the boot bitmap
  */
@@ -104,6 +120,9 @@ static unsigned long __init init_bootmem_core(bootmem_data_t *bdata,
 	mapsize = get_mapsize(bdata);
 	memset(bdata->node_bootmem_map, 0xff, mapsize);
 
+	bdebug("nid=%td start=%lx map=%lx end=%lx mapsize=%lx\n",
+		bdata - bootmem_node_data, start, mapstart, end, mapsize);
+
 	return mapsize;
 }
 
@@ -198,6 +217,8 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 	count += i;
 	bdata->node_bootmem_map = NULL;
 
+	bdebug("nid=%td released=%lx\n", bdata - bootmem_node_data, count);
+
 	return count;
 }
 
@@ -255,6 +276,10 @@ static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
 	if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
 		eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
 
+	bdebug("nid=%td start=%lx end=%lx\n", bdata - bootmem_node_data,
+		sidx + PFN_DOWN(bdata->node_boot_start),
+		eidx + PFN_DOWN(bdata->node_boot_start));
+
 	for (i = sidx; i < eidx; i++) {
 		if (unlikely(!test_and_clear_bit(i, bdata->node_bootmem_map)))
 			BUG();
@@ -360,13 +385,16 @@ static void __init reserve_bootmem_core(bootmem_data_t *bdata,
 	if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
 		eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
 
-	for (i = sidx; i < eidx; i++) {
-		if (test_and_set_bit(i, bdata->node_bootmem_map)) {
-#ifdef CONFIG_DEBUG_BOOTMEM
-			printk("hm, page %08lx reserved twice.\n", i*PAGE_SIZE);
-#endif
-		}
-	}
+	bdebug("nid=%td start=%lx end=%lx flags=%x\n",
+		bdata - bootmem_node_data,
+		sidx + PFN_DOWN(bdata->node_boot_start),
+		eidx + PFN_DOWN(bdata->node_boot_start),
+		flags);
+
+	for (i = sidx; i < eidx; i++)
+		if (test_and_set_bit(i, bdata->node_bootmem_map))
+			bdebug("hm, page %lx reserved twice.\n",
+				PFN_DOWN(bdata->node_boot_start) + i);
 }
 
 /**
@@ -455,6 +483,10 @@ alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size,
 	if (!bdata->node_bootmem_map)
 		return NULL;
 
+	bdebug("nid=%td size=%lx [%lu pages] align=%lx goal=%lx limit=%lx\n",
+		bdata - bootmem_node_data, size, PAGE_ALIGN(size) >> PAGE_SHIFT,
+		align, goal, limit);
+
 	/* bdata->node_boot_start is supposed to be (12+6)bits alignment on x86_64 ? */
 	node_boot_start = bdata->node_boot_start;
 	node_bootmem_map = bdata->node_bootmem_map;
@@ -562,6 +594,11 @@ found:
 		ret = phys_to_virt(start * PAGE_SIZE + node_boot_start);
 	}
 
+	bdebug("nid=%td start=%lx end=%lx\n",
+		bdata - bootmem_node_data,
+		start + PFN_DOWN(bdata->node_boot_start),
+		start + areasize + PFN_DOWN(bdata->node_boot_start));
+
 	/*
 	 * Reserve the area now:
 	 */
-- 
cgit v1.2.3


From df049a5f41a3b2eee2131221959e3b558ba7c705 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:02 -0700
Subject: bootmem: revisit bitmap size calculations

Reincarnate get_mapsize as bootmap_bytes and implement
bootmem_bootmap_pages on top of it.

Adjust users of these helpers and make free_all_bootmem_core use
bootmem_bootmap_pages instead of open-coding it.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 4e085ee1d98..484849bfc8c 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -50,17 +50,11 @@ early_param("bootmem_debug", bootmem_debug_setup);
 			__FUNCTION__, ## args);		\
 })
 
-/*
- * Given an initialised bdata, it returns the size of the boot bitmap
- */
-static unsigned long __init get_mapsize(bootmem_data_t *bdata)
+static unsigned long __init bootmap_bytes(unsigned long pages)
 {
-	unsigned long mapsize;
-	unsigned long start = PFN_DOWN(bdata->node_boot_start);
-	unsigned long end = bdata->node_low_pfn;
+	unsigned long bytes = (pages + 7) / 8;
 
-	mapsize = ((end - start) + 7) / 8;
-	return ALIGN(mapsize, sizeof(long));
+	return ALIGN(bytes, sizeof(long));
 }
 
 /**
@@ -69,13 +63,9 @@ static unsigned long __init get_mapsize(bootmem_data_t *bdata)
  */
 unsigned long __init bootmem_bootmap_pages(unsigned long pages)
 {
-	unsigned long mapsize;
-
-	mapsize = (pages+7)/8;
-	mapsize = (mapsize + ~PAGE_MASK) & PAGE_MASK;
-	mapsize >>= PAGE_SHIFT;
+	unsigned long bytes = bootmap_bytes(pages);
 
-	return mapsize;
+	return PAGE_ALIGN(bytes) >> PAGE_SHIFT;
 }
 
 /*
@@ -117,7 +107,7 @@ static unsigned long __init init_bootmem_core(bootmem_data_t *bdata,
 	 * Initially all pages are reserved - setup_arch() has to
 	 * register free RAM areas explicitly.
 	 */
-	mapsize = get_mapsize(bdata);
+	mapsize = bootmap_bytes(end - start);
 	memset(bdata->node_bootmem_map, 0xff, mapsize);
 
 	bdebug("nid=%td start=%lx map=%lx end=%lx mapsize=%lx\n",
@@ -160,7 +150,7 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 	struct page *page;
 	unsigned long pfn;
 	unsigned long i, count;
-	unsigned long idx;
+	unsigned long idx, pages;
 	unsigned long *map;
 	int gofast = 0;
 
@@ -211,7 +201,8 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 	 * needed anymore:
 	 */
 	page = virt_to_page(bdata->node_bootmem_map);
-	idx = (get_mapsize(bdata) + PAGE_SIZE-1) >> PAGE_SHIFT;
+	pages = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
+	idx = bootmem_bootmap_pages(pages);
 	for (i = 0; i < idx; i++, page++)
 		__free_pages_bootmem(page, 0);
 	count += i;
-- 
cgit v1.2.3


From 636cc40cb79f511d9caa27ef098a83e4fa4971fb Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:03 -0700
Subject: bootmem: revisit bootmem descriptor list handling

link_bootmem handles an insertion of a new descriptor into the sorted list
in more or less three explicit branches; empty list, insert in between and
append.  These cases can be expressed implicite.

Also mark the sorted list as initdata as it can be thrown away after boot
as well.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 484849bfc8c..9da7d409781 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -23,7 +23,6 @@ unsigned long max_low_pfn;
 unsigned long min_low_pfn;
 unsigned long max_pfn;
 
-static LIST_HEAD(bdata_list);
 #ifdef CONFIG_CRASH_DUMP
 /*
  * If we have booted due to a crash, max_pfn will be a very low value. We need
@@ -34,6 +33,8 @@ unsigned long saved_max_pfn;
 
 bootmem_data_t bootmem_node_data[MAX_NUMNODES] __initdata;
 
+static struct list_head bdata_list __initdata = LIST_HEAD_INIT(bdata_list);
+
 static int bootmem_debug;
 
 static int __init bootmem_debug_setup(char *buf)
@@ -73,20 +74,16 @@ unsigned long __init bootmem_bootmap_pages(unsigned long pages)
  */
 static void __init link_bootmem(bootmem_data_t *bdata)
 {
-	bootmem_data_t *ent;
+	struct list_head *iter;
 
-	if (list_empty(&bdata_list)) {
-		list_add(&bdata->list, &bdata_list);
-		return;
-	}
-	/* insert in order */
-	list_for_each_entry(ent, &bdata_list, list) {
-		if (bdata->node_boot_start < ent->node_boot_start) {
-			list_add_tail(&bdata->list, &ent->list);
-			return;
-		}
+	list_for_each(iter, &bdata_list) {
+		bootmem_data_t *ent;
+
+		ent = list_entry(iter, bootmem_data_t, list);
+		if (bdata->node_boot_start < ent->node_boot_start)
+			break;
 	}
-	list_add_tail(&bdata->list, &bdata_list);
+	list_add_tail(&bdata->list, iter);
 }
 
 /*
-- 
cgit v1.2.3


From 41546c17418fba08ece978bad72a33072715b8f3 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:03 -0700
Subject: bootmem: clean up free_all_bootmem_core

Rewrite the code in a more concise way using less variables.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 83 ++++++++++++++++++++++++++++--------------------------------
 1 file changed, 38 insertions(+), 45 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 9da7d409781..300d126ec53 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -144,66 +144,59 @@ unsigned long __init init_bootmem(unsigned long start, unsigned long pages)
 
 static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 {
+	int aligned;
 	struct page *page;
-	unsigned long pfn;
-	unsigned long i, count;
-	unsigned long idx, pages;
-	unsigned long *map;
-	int gofast = 0;
-
-	BUG_ON(!bdata->node_bootmem_map);
-
-	count = 0;
-	/* first extant page of the node */
-	pfn = PFN_DOWN(bdata->node_boot_start);
-	idx = bdata->node_low_pfn - pfn;
-	map = bdata->node_bootmem_map;
+	unsigned long start, end, pages, count = 0;
+
+	if (!bdata->node_bootmem_map)
+		return 0;
+
+	start = PFN_DOWN(bdata->node_boot_start);
+	end = bdata->node_low_pfn;
+
 	/*
-	 * Check if we are aligned to BITS_PER_LONG pages.  If so, we might
-	 * be able to free page orders of that size at once.
+	 * If the start is aligned to the machines wordsize, we might
+	 * be able to free pages in bulks of that order.
 	 */
-	if (!(pfn & (BITS_PER_LONG-1)))
-		gofast = 1;
+	aligned = !(start & (BITS_PER_LONG - 1));
+
+	bdebug("nid=%td start=%lx end=%lx aligned=%d\n",
+		bdata - bootmem_node_data, start, end, aligned);
+
+	while (start < end) {
+		unsigned long *map, idx, vec;
 
-	for (i = 0; i < idx; ) {
-		unsigned long v = ~map[i / BITS_PER_LONG];
+		map = bdata->node_bootmem_map;
+		idx = start - PFN_DOWN(bdata->node_boot_start);
+		vec = ~map[idx / BITS_PER_LONG];
 
-		if (gofast && v == ~0UL) {
-			int order;
+		if (aligned && vec == ~0UL && start + BITS_PER_LONG < end) {
+			int order = ilog2(BITS_PER_LONG);
 
-			page = pfn_to_page(pfn);
+			__free_pages_bootmem(pfn_to_page(start), order);
 			count += BITS_PER_LONG;
-			order = ffs(BITS_PER_LONG) - 1;
-			__free_pages_bootmem(page, order);
-			i += BITS_PER_LONG;
-			page += BITS_PER_LONG;
-		} else if (v) {
-			unsigned long m;
-
-			page = pfn_to_page(pfn);
-			for (m = 1; m && i < idx; m<<=1, page++, i++) {
-				if (v & m) {
-					count++;
+		} else {
+			unsigned long off = 0;
+
+			while (vec && off < BITS_PER_LONG) {
+				if (vec & 1) {
+					page = pfn_to_page(start + off);
 					__free_pages_bootmem(page, 0);
+					count++;
 				}
+				vec >>= 1;
+				off++;
 			}
-		} else {
-			i += BITS_PER_LONG;
 		}
-		pfn += BITS_PER_LONG;
+		start += BITS_PER_LONG;
 	}
 
-	/*
-	 * Now free the allocator bitmap itself, it's not
-	 * needed anymore:
-	 */
 	page = virt_to_page(bdata->node_bootmem_map);
 	pages = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
-	idx = bootmem_bootmap_pages(pages);
-	for (i = 0; i < idx; i++, page++)
-		__free_pages_bootmem(page, 0);
-	count += i;
-	bdata->node_bootmem_map = NULL;
+	pages = bootmem_bootmap_pages(pages);
+	count += pages;
+	while (pages--)
+		__free_pages_bootmem(page++, 0);
 
 	bdebug("nid=%td released=%lx\n", bdata - bootmem_node_data, count);
 
-- 
cgit v1.2.3


From 5f2809e69c7128f86316048221cf45146f69a4a0 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:05 -0700
Subject: bootmem: clean up alloc_bootmem_core

alloc_bootmem_core has become quite nasty to read over time.  This is a
clean rewrite that keeps the semantics.

bdata->last_pos has been dropped.

bdata->last_success has been renamed to hint_idx and it is now an index
relative to the node's range.  Since further block searching might start
at this index, it is now set to the end of a succeeded allocation rather
than its beginning.

bdata->last_offset has been renamed to last_end_off to be more clear that
it represents the ending address of the last allocation relative to the
node.

[y-goto@jp.fujitsu.com: fix new alloc_bootmem_core()]
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/bootmem.h |   6 +-
 mm/bootmem.c            | 212 +++++++++++++++++-------------------------------
 2 files changed, 78 insertions(+), 140 deletions(-)

diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 5000fd70b04..90921d10ffa 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -31,10 +31,8 @@ typedef struct bootmem_data {
 	unsigned long node_boot_start;
 	unsigned long node_low_pfn;
 	void *node_bootmem_map;
-	unsigned long last_offset;
-	unsigned long last_pos;
-	unsigned long last_success;	/* Previous allocation point.  To speed
-					 * up searching */
+	unsigned long last_end_off;
+	unsigned long hint_idx;
 	struct list_head list;
 } bootmem_data_t;
 
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 300d126ec53..94ea612decc 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -242,8 +242,9 @@ static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
 	 * considered reserved.
 	 */
 
-	if (addr >= bdata->node_boot_start && addr < bdata->last_success)
-		bdata->last_success = addr;
+	if (addr >= bdata->node_boot_start &&
+			PFN_DOWN(addr - bdata->node_boot_start) < bdata->hint_idx)
+		bdata->hint_idx = PFN_DOWN(addr - bdata->node_boot_start);
 
 	/*
 	 * Round up to index to the range.
@@ -431,36 +432,16 @@ int __init reserve_bootmem(unsigned long addr, unsigned long size,
 }
 #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 
-/*
- * We 'merge' subsequent allocations to save space. We might 'lose'
- * some fraction of a page if allocations cannot be satisfied due to
- * size constraints on boxes where there is physical RAM space
- * fragmentation - in these cases (mostly large memory boxes) this
- * is not a problem.
- *
- * On low memory boxes we get it right in 100% of the cases.
- *
- * alignment has to be a power of 2 value.
- *
- * NOTE:  This function is _not_ reentrant.
- */
-static void * __init
-alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size,
-		unsigned long align, unsigned long goal, unsigned long limit)
+static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
+				unsigned long size, unsigned long align,
+				unsigned long goal, unsigned long limit)
 {
-	unsigned long areasize, preferred;
-	unsigned long i, start = 0, incr, eidx, end_pfn;
-	void *ret;
-	unsigned long node_boot_start;
-	void *node_bootmem_map;
-
-	if (!size) {
-		printk("alloc_bootmem_core(): zero-sized request\n");
-		BUG();
-	}
-	BUG_ON(align & (align-1));
+	unsigned long min, max, start, sidx, midx, step;
+
+	BUG_ON(!size);
+	BUG_ON(align & (align - 1));
+	BUG_ON(limit && goal + size > limit);
 
-	/* on nodes without memory - bootmem_map is NULL */
 	if (!bdata->node_bootmem_map)
 		return NULL;
 
@@ -468,126 +449,85 @@ alloc_bootmem_core(struct bootmem_data *bdata, unsigned long size,
 		bdata - bootmem_node_data, size, PAGE_ALIGN(size) >> PAGE_SHIFT,
 		align, goal, limit);
 
-	/* bdata->node_boot_start is supposed to be (12+6)bits alignment on x86_64 ? */
-	node_boot_start = bdata->node_boot_start;
-	node_bootmem_map = bdata->node_bootmem_map;
-	if (align) {
-		node_boot_start = ALIGN(bdata->node_boot_start, align);
-		if (node_boot_start > bdata->node_boot_start)
-			node_bootmem_map = (unsigned long *)bdata->node_bootmem_map +
-			    PFN_DOWN(node_boot_start - bdata->node_boot_start)/BITS_PER_LONG;
-	}
+	min = PFN_DOWN(bdata->node_boot_start);
+	max = bdata->node_low_pfn;
 
-	if (limit && node_boot_start >= limit)
+	goal >>= PAGE_SHIFT;
+	limit >>= PAGE_SHIFT;
+
+	if (limit && max > limit)
+		max = limit;
+	if (max <= min)
 		return NULL;
 
-	end_pfn = bdata->node_low_pfn;
-	limit = PFN_DOWN(limit);
-	if (limit && end_pfn > limit)
-		end_pfn = limit;
+	step = max(align >> PAGE_SHIFT, 1UL);
 
-	eidx = end_pfn - PFN_DOWN(node_boot_start);
+	if (goal && min < goal && goal < max)
+		start = ALIGN(goal, step);
+	else
+		start = ALIGN(min, step);
 
-	/*
-	 * We try to allocate bootmem pages above 'goal'
-	 * first, then we try to allocate lower pages.
-	 */
-	preferred = 0;
-	if (goal && PFN_DOWN(goal) < end_pfn) {
-		if (goal > node_boot_start)
-			preferred = goal - node_boot_start;
-
-		if (bdata->last_success > node_boot_start &&
-			bdata->last_success - node_boot_start >= preferred)
-			if (!limit || (limit && limit > bdata->last_success))
-				preferred = bdata->last_success - node_boot_start;
-	}
+	sidx = start - PFN_DOWN(bdata->node_boot_start);
+	midx = max - PFN_DOWN(bdata->node_boot_start);
 
-	preferred = PFN_DOWN(ALIGN(preferred, align));
-	areasize = (size + PAGE_SIZE-1) / PAGE_SIZE;
-	incr = align >> PAGE_SHIFT ? : 1;
+	if (bdata->hint_idx > sidx) {
+		/* Make sure we retry on failure */
+		goal = 1;
+		sidx = ALIGN(bdata->hint_idx, step);
+	}
 
-restart_scan:
-	for (i = preferred; i < eidx;) {
-		unsigned long j;
+	while (1) {
+		int merge;
+		void *region;
+		unsigned long eidx, i, start_off, end_off;
+find_block:
+		sidx = find_next_zero_bit(bdata->node_bootmem_map, midx, sidx);
+		sidx = ALIGN(sidx, step);
+		eidx = sidx + PFN_UP(size);
 
-		i = find_next_zero_bit(node_bootmem_map, eidx, i);
-		i = ALIGN(i, incr);
-		if (i >= eidx)
+		if (sidx >= midx || eidx > midx)
 			break;
-		if (test_bit(i, node_bootmem_map)) {
-			i += incr;
-			continue;
-		}
-		for (j = i + 1; j < i + areasize; ++j) {
-			if (j >= eidx)
-				goto fail_block;
-			if (test_bit(j, node_bootmem_map))
-				goto fail_block;
-		}
-		start = i;
-		goto found;
-	fail_block:
-		i = ALIGN(j, incr);
-		if (i == j)
-			i += incr;
-	}
-
-	if (preferred > 0) {
-		preferred = 0;
-		goto restart_scan;
-	}
-	return NULL;
 
-found:
-	bdata->last_success = PFN_PHYS(start) + node_boot_start;
-	BUG_ON(start >= eidx);
+		for (i = sidx; i < eidx; i++)
+			if (test_bit(i, bdata->node_bootmem_map)) {
+				sidx = ALIGN(i, step);
+				if (sidx == i)
+					sidx += step;
+				goto find_block;
+			}
 
-	/*
-	 * Is the next page of the previous allocation-end the start
-	 * of this allocation's buffer? If yes then we can 'merge'
-	 * the previous partial page with this allocation.
-	 */
-	if (align < PAGE_SIZE &&
-	    bdata->last_offset && bdata->last_pos+1 == start) {
-		unsigned long offset, remaining_size;
-		offset = ALIGN(bdata->last_offset, align);
-		BUG_ON(offset > PAGE_SIZE);
-		remaining_size = PAGE_SIZE - offset;
-		if (size < remaining_size) {
-			areasize = 0;
-			/* last_pos unchanged */
-			bdata->last_offset = offset + size;
-			ret = phys_to_virt(bdata->last_pos * PAGE_SIZE +
-					   offset + node_boot_start);
-		} else {
-			remaining_size = size - remaining_size;
-			areasize = (remaining_size + PAGE_SIZE-1) / PAGE_SIZE;
-			ret = phys_to_virt(bdata->last_pos * PAGE_SIZE +
-					   offset + node_boot_start);
-			bdata->last_pos = start + areasize - 1;
-			bdata->last_offset = remaining_size;
-		}
-		bdata->last_offset &= ~PAGE_MASK;
-	} else {
-		bdata->last_pos = start + areasize - 1;
-		bdata->last_offset = size & ~PAGE_MASK;
-		ret = phys_to_virt(start * PAGE_SIZE + node_boot_start);
+		if (bdata->last_end_off &&
+				PFN_DOWN(bdata->last_end_off) + 1 == sidx)
+			start_off = ALIGN(bdata->last_end_off, align);
+		else
+			start_off = PFN_PHYS(sidx);
+
+		merge = PFN_DOWN(start_off) < sidx;
+		end_off = start_off + size;
+
+		bdata->last_end_off = end_off;
+		bdata->hint_idx = PFN_UP(end_off);
+
+		/*
+		 * Reserve the area now:
+		 */
+		for (i = PFN_DOWN(start_off) + merge;
+				i < PFN_UP(end_off); i++)
+			if (test_and_set_bit(i, bdata->node_bootmem_map))
+				BUG();
+
+		region = phys_to_virt(bdata->node_boot_start + start_off);
+		memset(region, 0, size);
+		return region;
 	}
 
-	bdebug("nid=%td start=%lx end=%lx\n",
-		bdata - bootmem_node_data,
-		start + PFN_DOWN(bdata->node_boot_start),
-		start + areasize + PFN_DOWN(bdata->node_boot_start));
+	if (goal) {
+		goal = 0;
+		sidx = 0;
+		goto find_block;
+	}
 
-	/*
-	 * Reserve the area now:
-	 */
-	for (i = start; i < start + areasize; i++)
-		if (unlikely(test_and_set_bit(i, node_bootmem_map)))
-			BUG();
-	memset(ret, 0, size);
-	return ret;
+	return NULL;
 }
 
 /**
-- 
cgit v1.2.3


From d747fa4bcebcf3696607b86a6b0dafa644be0676 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:05 -0700
Subject: bootmem: free/reserve helpers

Factor out the common operation of marking a range on the bitmap.

[akpm@linux-foundation.org: fix various warnings]
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 65 ++++++++++++++++++++++++++++++++++++++++--------------------
 1 file changed, 43 insertions(+), 22 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 94ea612decc..9d03ff65135 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -225,6 +225,44 @@ unsigned long __init free_all_bootmem(void)
 	return free_all_bootmem_core(NODE_DATA(0)->bdata);
 }
 
+static void __init __free(bootmem_data_t *bdata,
+			unsigned long sidx, unsigned long eidx)
+{
+	unsigned long idx;
+
+	bdebug("nid=%td start=%lx end=%lx\n", bdata - bootmem_node_data,
+		sidx + PFN_DOWN(bdata->node_boot_start),
+		eidx + PFN_DOWN(bdata->node_boot_start));
+
+	for (idx = sidx; idx < eidx; idx++)
+		if (!test_and_clear_bit(idx, bdata->node_bootmem_map))
+			BUG();
+}
+
+static int __init __reserve(bootmem_data_t *bdata, unsigned long sidx,
+			unsigned long eidx, int flags)
+{
+	unsigned long idx;
+	int exclusive = flags & BOOTMEM_EXCLUSIVE;
+
+	bdebug("nid=%td start=%lx end=%lx flags=%x\n",
+		bdata - bootmem_node_data,
+		sidx + PFN_DOWN(bdata->node_boot_start),
+		eidx + PFN_DOWN(bdata->node_boot_start),
+		flags);
+
+	for (idx = sidx; idx < eidx; idx++)
+		if (test_and_set_bit(idx, bdata->node_bootmem_map)) {
+			if (exclusive) {
+				__free(bdata, sidx, idx);
+				return -EBUSY;
+			}
+			bdebug("silent double reserve of PFN %lx\n",
+				idx + PFN_DOWN(bdata->node_boot_start));
+		}
+	return 0;
+}
+
 static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
 				     unsigned long size)
 {
@@ -258,14 +296,7 @@ static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
 	if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
 		eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
 
-	bdebug("nid=%td start=%lx end=%lx\n", bdata - bootmem_node_data,
-		sidx + PFN_DOWN(bdata->node_boot_start),
-		eidx + PFN_DOWN(bdata->node_boot_start));
-
-	for (i = sidx; i < eidx; i++) {
-		if (unlikely(!test_and_clear_bit(i, bdata->node_bootmem_map)))
-			BUG();
-	}
+	__free(bdata, sidx, eidx);
 }
 
 /**
@@ -367,16 +398,7 @@ static void __init reserve_bootmem_core(bootmem_data_t *bdata,
 	if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
 		eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
 
-	bdebug("nid=%td start=%lx end=%lx flags=%x\n",
-		bdata - bootmem_node_data,
-		sidx + PFN_DOWN(bdata->node_boot_start),
-		eidx + PFN_DOWN(bdata->node_boot_start),
-		flags);
-
-	for (i = sidx; i < eidx; i++)
-		if (test_and_set_bit(i, bdata->node_bootmem_map))
-			bdebug("hm, page %lx reserved twice.\n",
-				PFN_DOWN(bdata->node_boot_start) + i);
+	return __reserve(bdata, sidx, eidx, flags);
 }
 
 /**
@@ -511,10 +533,9 @@ find_block:
 		/*
 		 * Reserve the area now:
 		 */
-		for (i = PFN_DOWN(start_off) + merge;
-				i < PFN_UP(end_off); i++)
-			if (test_and_set_bit(i, bdata->node_bootmem_map))
-				BUG();
+		if (__reserve(bdata, PFN_DOWN(start_off) + merge,
+				PFN_UP(end_off), BOOTMEM_EXCLUSIVE))
+			BUG();
 
 		region = phys_to_virt(bdata->node_boot_start + start_off);
 		memset(region, 0, size);
-- 
cgit v1.2.3


From e2bf3cae515090fefe28329e71230dfe7ab873b1 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:06 -0700
Subject: bootmem: factor out the marking of a PFN range

Introduce new helpers that mark a range that resides completely on a node
or node-agnostic ranges that might also span node boundaries.

The free/reserve API functions will then directly use these helpers.

Note that the free/reserve semantics become more strict: while the prior
code took basically arbitrary range arguments and marked the PFNs that
happen to fall into that range, the new code requires node-specific ranges
to be completely on the node.  The node-agnostic requests might span node
boundaries as long as the nodes are contiguous.

Passing ranges that do not satisfy these criteria is a bug.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 188 ++++++++++++++++++++++-------------------------------------
 1 file changed, 69 insertions(+), 119 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 9d03ff65135..e5415a5414a 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -234,6 +234,9 @@ static void __init __free(bootmem_data_t *bdata,
 		sidx + PFN_DOWN(bdata->node_boot_start),
 		eidx + PFN_DOWN(bdata->node_boot_start));
 
+	if (bdata->hint_idx > sidx)
+		bdata->hint_idx = sidx;
+
 	for (idx = sidx; idx < eidx; idx++)
 		if (!test_and_clear_bit(idx, bdata->node_bootmem_map))
 			BUG();
@@ -263,40 +266,57 @@ static int __init __reserve(bootmem_data_t *bdata, unsigned long sidx,
 	return 0;
 }
 
-static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
-				     unsigned long size)
+static int __init mark_bootmem_node(bootmem_data_t *bdata,
+				unsigned long start, unsigned long end,
+				int reserve, int flags)
 {
 	unsigned long sidx, eidx;
-	unsigned long i;
 
-	BUG_ON(!size);
+	bdebug("nid=%td start=%lx end=%lx reserve=%d flags=%x\n",
+		bdata - bootmem_node_data, start, end, reserve, flags);
 
-	/* out range */
-	if (addr + size < bdata->node_boot_start ||
-		PFN_DOWN(addr) > bdata->node_low_pfn)
-		return;
-	/*
-	 * round down end of usable mem, partially free pages are
-	 * considered reserved.
-	 */
+	BUG_ON(start < PFN_DOWN(bdata->node_boot_start));
+	BUG_ON(end > bdata->node_low_pfn);
 
-	if (addr >= bdata->node_boot_start &&
-			PFN_DOWN(addr - bdata->node_boot_start) < bdata->hint_idx)
-		bdata->hint_idx = PFN_DOWN(addr - bdata->node_boot_start);
+	sidx = start - PFN_DOWN(bdata->node_boot_start);
+	eidx = end - PFN_DOWN(bdata->node_boot_start);
 
-	/*
-	 * Round up to index to the range.
-	 */
-	if (PFN_UP(addr) > PFN_DOWN(bdata->node_boot_start))
-		sidx = PFN_UP(addr) - PFN_DOWN(bdata->node_boot_start);
+	if (reserve)
+		return __reserve(bdata, sidx, eidx, flags);
 	else
-		sidx = 0;
+		__free(bdata, sidx, eidx);
+	return 0;
+}
+
+static int __init mark_bootmem(unsigned long start, unsigned long end,
+				int reserve, int flags)
+{
+	unsigned long pos;
+	bootmem_data_t *bdata;
+
+	pos = start;
+	list_for_each_entry(bdata, &bdata_list, list) {
+		int err;
+		unsigned long max;
+
+		if (pos < PFN_DOWN(bdata->node_boot_start)) {
+			BUG_ON(pos != start);
+			continue;
+		}
+
+		max = min(bdata->node_low_pfn, end);
 
-	eidx = PFN_DOWN(addr + size - bdata->node_boot_start);
-	if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
-		eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
+		err = mark_bootmem_node(bdata, pos, max, reserve, flags);
+		if (reserve && err) {
+			mark_bootmem(start, pos, 0, 0);
+			return err;
+		}
 
-	__free(bdata, sidx, eidx);
+		if (max == end)
+			return 0;
+		pos = bdata->node_low_pfn;
+	}
+	BUG();
 }
 
 /**
@@ -307,12 +327,17 @@ static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
  *
  * Partial pages will be considered reserved and left as they are.
  *
- * Only physical pages that actually reside on @pgdat are marked.
+ * The range must reside completely on the specified node.
  */
 void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 			      unsigned long size)
 {
-	free_bootmem_core(pgdat->bdata, physaddr, size);
+	unsigned long start, end;
+
+	start = PFN_UP(physaddr);
+	end = PFN_DOWN(physaddr + size);
+
+	mark_bootmem_node(pgdat->bdata, start, end, 0, 0);
 }
 
 /**
@@ -322,83 +347,16 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
  *
  * Partial pages will be considered reserved and left as they are.
  *
- * All physical pages within the range are marked, no matter what
- * node they reside on.
+ * The range must be contiguous but may span node boundaries.
  */
 void __init free_bootmem(unsigned long addr, unsigned long size)
 {
-	bootmem_data_t *bdata;
-	list_for_each_entry(bdata, &bdata_list, list)
-		free_bootmem_core(bdata, addr, size);
-}
-
-/*
- * Marks a particular physical memory range as unallocatable. Usable RAM
- * might be used for boot-time allocations - or it might get added
- * to the free page pool later on.
- */
-static int __init can_reserve_bootmem_core(bootmem_data_t *bdata,
-			unsigned long addr, unsigned long size, int flags)
-{
-	unsigned long sidx, eidx;
-	unsigned long i;
-
-	BUG_ON(!size);
-
-	/* out of range, don't hold other */
-	if (addr + size < bdata->node_boot_start ||
-		PFN_DOWN(addr) > bdata->node_low_pfn)
-		return 0;
-
-	/*
-	 * Round up to index to the range.
-	 */
-	if (addr > bdata->node_boot_start)
-		sidx= PFN_DOWN(addr - bdata->node_boot_start);
-	else
-		sidx = 0;
-
-	eidx = PFN_UP(addr + size - bdata->node_boot_start);
-	if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
-		eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
-
-	for (i = sidx; i < eidx; i++) {
-		if (test_bit(i, bdata->node_bootmem_map)) {
-			if (flags & BOOTMEM_EXCLUSIVE)
-				return -EBUSY;
-		}
-	}
-
-	return 0;
-
-}
-
-static void __init reserve_bootmem_core(bootmem_data_t *bdata,
-			unsigned long addr, unsigned long size, int flags)
-{
-	unsigned long sidx, eidx;
-	unsigned long i;
-
-	BUG_ON(!size);
-
-	/* out of range */
-	if (addr + size < bdata->node_boot_start ||
-		PFN_DOWN(addr) > bdata->node_low_pfn)
-		return;
-
-	/*
-	 * Round up to index to the range.
-	 */
-	if (addr > bdata->node_boot_start)
-		sidx= PFN_DOWN(addr - bdata->node_boot_start);
-	else
-		sidx = 0;
+	unsigned long start, end;
 
-	eidx = PFN_UP(addr + size - bdata->node_boot_start);
-	if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
-		eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
+	start = PFN_UP(addr);
+	end = PFN_DOWN(addr + size);
 
-	return __reserve(bdata, sidx, eidx, flags);
+	mark_bootmem(start, end, 0, 0);
 }
 
 /**
@@ -410,18 +368,17 @@ static void __init reserve_bootmem_core(bootmem_data_t *bdata,
  *
  * Partial pages will be reserved.
  *
- * Only physical pages that actually reside on @pgdat are marked.
+ * The range must reside completely on the specified node.
  */
 int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 				 unsigned long size, int flags)
 {
-	int ret;
+	unsigned long start, end;
 
-	ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
-	if (ret < 0)
-		return -ENOMEM;
-	reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
-	return 0;
+	start = PFN_DOWN(physaddr);
+	end = PFN_UP(physaddr + size);
+
+	return mark_bootmem_node(pgdat->bdata, start, end, 1, flags);
 }
 
 #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
@@ -433,24 +390,17 @@ int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
  *
  * Partial pages will be reserved.
  *
- * All physical pages within the range are marked, no matter what
- * node they reside on.
+ * The range must be contiguous but may span node boundaries.
  */
 int __init reserve_bootmem(unsigned long addr, unsigned long size,
 			    int flags)
 {
-	bootmem_data_t *bdata;
-	int ret;
+	unsigned long start, end;
 
-	list_for_each_entry(bdata, &bdata_list, list) {
-		ret = can_reserve_bootmem_core(bdata, addr, size, flags);
-		if (ret < 0)
-			return ret;
-	}
-	list_for_each_entry(bdata, &bdata_list, list)
-		reserve_bootmem_core(bdata, addr, size, flags);
+	start = PFN_DOWN(addr);
+	end = PFN_UP(addr + size);
 
-	return 0;
+	return mark_bootmem(start, end, 1, flags);
 }
 #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 
@@ -663,7 +613,7 @@ void * __init alloc_bootmem_section(unsigned long size,
 	if (start_nr != section_nr || end_nr != section_nr) {
 		printk(KERN_WARNING "alloc_bootmem failed on section %ld.\n",
 		       section_nr);
-		free_bootmem_core(pgdat->bdata, __pa(ptr), size);
+		free_bootmem_node(pgdat, __pa(ptr), size);
 		ptr = NULL;
 	}
 
-- 
cgit v1.2.3


From 0f3caba211babef6e3fbde1ba76ddc79321bc92f Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:07 -0700
Subject: bootmem: respect goal more likely

The old node-agnostic code tried allocating on all nodes starting from the
one with the lowest range.  alloc_bootmem_core retried without the goal if
it could not satisfy it and so the goal was only respected at all when it
happened to be on the first (lowest page numbers) node (or theoretically
if allocations failed on all nodes before to the one holding the goal).

Introduce a non-panicking helper that starts allocating from the node
holding the goal and falls back only after all thes tries failed, thus
moving the goal fallback code out of alloc_bootmem_core.

Make all other allocation functions benefit from this new helper.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 92 +++++++++++++++++++++++++++++++++++-------------------------
 1 file changed, 54 insertions(+), 38 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index e5415a5414a..89646f77b42 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -408,6 +408,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 				unsigned long size, unsigned long align,
 				unsigned long goal, unsigned long limit)
 {
+	unsigned long fallback = 0;
 	unsigned long min, max, start, sidx, midx, step;
 
 	BUG_ON(!size);
@@ -443,8 +444,11 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 	midx = max - PFN_DOWN(bdata->node_boot_start);
 
 	if (bdata->hint_idx > sidx) {
-		/* Make sure we retry on failure */
-		goal = 1;
+		/*
+		 * Handle the valid case of sidx being zero and still
+		 * catch the fallback below.
+		 */
+		fallback = sidx + 1;
 		sidx = ALIGN(bdata->hint_idx, step);
 	}
 
@@ -492,10 +496,39 @@ find_block:
 		return region;
 	}
 
+	if (fallback) {
+		sidx = ALIGN(fallback - 1, step);
+		fallback = 0;
+		goto find_block;
+	}
+
+	return NULL;
+}
+
+static void * __init ___alloc_bootmem_nopanic(unsigned long size,
+					unsigned long align,
+					unsigned long goal,
+					unsigned long limit)
+{
+	bootmem_data_t *bdata;
+
+restart:
+	list_for_each_entry(bdata, &bdata_list, list) {
+		void *region;
+
+		if (goal && bdata->node_low_pfn <= PFN_DOWN(goal))
+			continue;
+		if (limit && bdata->node_boot_start >= limit)
+			break;
+
+		region = alloc_bootmem_core(bdata, size, align, goal, limit);
+		if (region)
+			return region;
+	}
+
 	if (goal) {
 		goal = 0;
-		sidx = 0;
-		goto find_block;
+		goto restart;
 	}
 
 	return NULL;
@@ -515,16 +548,23 @@ find_block:
  * Returns NULL on failure.
  */
 void * __init __alloc_bootmem_nopanic(unsigned long size, unsigned long align,
-				      unsigned long goal)
+					unsigned long goal)
 {
-	bootmem_data_t *bdata;
-	void *ptr;
+	return ___alloc_bootmem_nopanic(size, align, goal, 0);
+}
 
-	list_for_each_entry(bdata, &bdata_list, list) {
-		ptr = alloc_bootmem_core(bdata, size, align, goal, 0);
-		if (ptr)
-			return ptr;
-	}
+static void * __init ___alloc_bootmem(unsigned long size, unsigned long align,
+					unsigned long goal, unsigned long limit)
+{
+	void *mem = ___alloc_bootmem_nopanic(size, align, goal, limit);
+
+	if (mem)
+		return mem;
+	/*
+	 * Whoops, we cannot satisfy the allocation request.
+	 */
+	printk(KERN_ALERT "bootmem alloc of %lu bytes failed!\n", size);
+	panic("Out of memory");
 	return NULL;
 }
 
@@ -544,16 +584,7 @@ void * __init __alloc_bootmem_nopanic(unsigned long size, unsigned long align,
 void * __init __alloc_bootmem(unsigned long size, unsigned long align,
 			      unsigned long goal)
 {
-	void *mem = __alloc_bootmem_nopanic(size,align,goal);
-
-	if (mem)
-		return mem;
-	/*
-	 * Whoops, we cannot satisfy the allocation request.
-	 */
-	printk(KERN_ALERT "bootmem alloc of %lu bytes failed!\n", size);
-	panic("Out of memory");
-	return NULL;
+	return ___alloc_bootmem(size, align, goal, 0);
 }
 
 /**
@@ -653,22 +684,7 @@ void * __init __alloc_bootmem_node_nopanic(pg_data_t *pgdat, unsigned long size,
 void * __init __alloc_bootmem_low(unsigned long size, unsigned long align,
 				  unsigned long goal)
 {
-	bootmem_data_t *bdata;
-	void *ptr;
-
-	list_for_each_entry(bdata, &bdata_list, list) {
-		ptr = alloc_bootmem_core(bdata, size, align, goal,
-					ARCH_LOW_ADDRESS_LIMIT);
-		if (ptr)
-			return ptr;
-	}
-
-	/*
-	 * Whoops, we cannot satisfy the allocation request.
-	 */
-	printk(KERN_ALERT "low bootmem alloc of %lu bytes failed!\n", size);
-	panic("Out of low memory");
-	return NULL;
+	return ___alloc_bootmem(size, align, goal, ARCH_LOW_ADDRESS_LIMIT);
 }
 
 /**
-- 
cgit v1.2.3


From 4cc278b721d5bf3569dfc5f1100253042e097bc3 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:08 -0700
Subject: bootmem: Make __alloc_bootmem_low_node fall back to other nodes

__alloc_bootmem_node already does this, make the interface consistent.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 89646f77b42..459da4710b8 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -587,6 +587,19 @@ void * __init __alloc_bootmem(unsigned long size, unsigned long align,
 	return ___alloc_bootmem(size, align, goal, 0);
 }
 
+static void * __init ___alloc_bootmem_node(bootmem_data_t *bdata,
+				unsigned long size, unsigned long align,
+				unsigned long goal, unsigned long limit)
+{
+	void *ptr;
+
+	ptr = alloc_bootmem_core(bdata, size, align, goal, limit);
+	if (ptr)
+		return ptr;
+
+	return ___alloc_bootmem(size, align, goal, limit);
+}
+
 /**
  * __alloc_bootmem_node - allocate boot memory from a specific node
  * @pgdat: node to allocate from
@@ -605,13 +618,7 @@ void * __init __alloc_bootmem(unsigned long size, unsigned long align,
 void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 				   unsigned long align, unsigned long goal)
 {
-	void *ptr;
-
-	ptr = alloc_bootmem_core(pgdat->bdata, size, align, goal, 0);
-	if (ptr)
-		return ptr;
-
-	return __alloc_bootmem(size, align, goal);
+	return ___alloc_bootmem_node(pgdat->bdata, size, align, goal, 0);
 }
 
 #ifdef CONFIG_SPARSEMEM
@@ -705,6 +712,6 @@ void * __init __alloc_bootmem_low(unsigned long size, unsigned long align,
 void * __init __alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size,
 				       unsigned long align, unsigned long goal)
 {
-	return alloc_bootmem_core(pgdat->bdata, size, align, goal,
-				ARCH_LOW_ADDRESS_LIMIT);
+	return ___alloc_bootmem_node(pgdat->bdata, size, align,
+				goal, ARCH_LOW_ADDRESS_LIMIT);
 }
-- 
cgit v1.2.3


From 75a56cfe9fdb064d1db1cfbc564315fddb756fb1 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:09 -0700
Subject: bootmem: revisit alloc_bootmem_section

Since alloc_bootmem_core does no goal-fallback anymore and just returns
NULL if the allocation fails, we might now use it in alloc_bootmem_section
without all the fixup code for a misplaced allocation.

Also, the limit can be the first PFN of the next section as the semantics
is that the limit is _above_ the allocated region, not within.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 27 ++++++---------------------
 1 file changed, 6 insertions(+), 21 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index 459da4710b8..282b786c2b1 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -632,30 +632,15 @@ void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size,
 void * __init alloc_bootmem_section(unsigned long size,
 				    unsigned long section_nr)
 {
-	void *ptr;
-	unsigned long limit, goal, start_nr, end_nr, pfn;
-	struct pglist_data *pgdat;
+	bootmem_data_t *bdata;
+	unsigned long pfn, goal, limit;
 
 	pfn = section_nr_to_pfn(section_nr);
-	goal = PFN_PHYS(pfn);
-	limit = PFN_PHYS(section_nr_to_pfn(section_nr + 1)) - 1;
-	pgdat = NODE_DATA(early_pfn_to_nid(pfn));
-	ptr = alloc_bootmem_core(pgdat->bdata, size, SMP_CACHE_BYTES, goal,
-				limit);
-
-	if (!ptr)
-		return NULL;
-
-	start_nr = pfn_to_section_nr(PFN_DOWN(__pa(ptr)));
-	end_nr = pfn_to_section_nr(PFN_DOWN(__pa(ptr) + size));
-	if (start_nr != section_nr || end_nr != section_nr) {
-		printk(KERN_WARNING "alloc_bootmem failed on section %ld.\n",
-		       section_nr);
-		free_bootmem_node(pgdat, __pa(ptr), size);
-		ptr = NULL;
-	}
+	goal = pfn << PAGE_SHIFT;
+	limit = section_nr_to_pfn(section_nr + 1) << PAGE_SHIFT;
+	bdata = &bootmem_node_data[early_pfn_to_nid(pfn)];
 
-	return ptr;
+	return alloc_bootmem_core(bdata, size, SMP_CACHE_BYTES, goal, limit);
 }
 #endif
 
-- 
cgit v1.2.3


From 3560e249abda6bee41a07a7bf0383a6e193e2839 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 23 Jul 2008 21:28:09 -0700
Subject: bootmem: replace node_boot_start in struct bootmem_data

Almost all users of this field need a PFN instead of a physical address,
so replace node_boot_start with node_min_pfn.

[Lee.Schermerhorn@hp.com: fix spurious BUG_ON() in mark_bootmem()]
Signed-off-by: Johannes Weiner <hannes@saeureba.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/mm/numa.c     |  2 +-
 arch/arm/plat-omap/fb.c  |  4 +---
 arch/avr32/mm/init.c     |  3 +--
 arch/ia64/mm/discontig.c | 19 ++++++++++---------
 arch/m32r/mm/discontig.c |  3 +--
 arch/m32r/mm/init.c      |  4 +---
 arch/mn10300/mm/init.c   |  6 +++---
 arch/sh/mm/init.c        |  2 +-
 include/linux/bootmem.h  |  2 +-
 mm/bootmem.c             | 40 +++++++++++++++++++++-------------------
 10 files changed, 41 insertions(+), 44 deletions(-)

diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index def0c74a78a..d8c4ceaf00b 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -304,7 +304,7 @@ void __init paging_init(void)
 
 	for_each_online_node(nid) {
 		bootmem_data_t *bdata = &bootmem_node_data[nid];
-		unsigned long start_pfn = bdata->node_boot_start >> PAGE_SHIFT;
+		unsigned long start_pfn = bdata->node_min_pfn;
 		unsigned long end_pfn = bdata->node_low_pfn;
 
 		if (dma_local_pfn >= end_pfn - start_pfn)
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 7854f19b77c..96d6f061973 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -182,7 +182,7 @@ void __init omapfb_reserve_sdram(void)
 		return;
 
 	bdata = NODE_DATA(0)->bdata;
-	sdram_start = bdata->node_boot_start;
+	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
 	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
 	reserved = 0;
 	for (i = 0; ; i++) {
@@ -340,5 +340,3 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 
 
 #endif
-
-
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 786de88a82a..3c85fdaa948 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -119,8 +119,7 @@ void __init paging_init(void)
 		unsigned long zones_size[MAX_NR_ZONES];
 		unsigned long low, start_pfn;
 
-		start_pfn = pgdat->bdata->node_boot_start;
-		start_pfn >>= PAGE_SHIFT;
+		start_pfn = pgdat->bdata->node_min_pfn;
 		low = pgdat->bdata->node_low_pfn;
 
 		memset(zones_size, 0, sizeof(zones_size));
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 2fcf8464331..d83125e1ed2 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -74,17 +74,17 @@ pg_data_t *pgdat_list[MAX_NUMNODES];
 static int __init build_node_maps(unsigned long start, unsigned long len,
 				  int node)
 {
-	unsigned long cstart, epfn, end = start + len;
+	unsigned long spfn, epfn, end = start + len;
 	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
-	cstart = GRANULEROUNDDOWN(start);
+	spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
 
 	if (!bdp->node_low_pfn) {
-		bdp->node_boot_start = cstart;
+		bdp->node_min_pfn = spfn;
 		bdp->node_low_pfn = epfn;
 	} else {
-		bdp->node_boot_start = min(cstart, bdp->node_boot_start);
+		bdp->node_min_pfn = min(spfn, bdp->node_min_pfn);
 		bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
 	}
 
@@ -221,20 +221,21 @@ static void __init fill_pernode(int node, unsigned long pernode,
 static int __init find_pernode_space(unsigned long start, unsigned long len,
 				     int node)
 {
-	unsigned long epfn;
+	unsigned long spfn, epfn;
 	unsigned long pernodesize = 0, pernode, pages, mapsize;
 	struct bootmem_data *bdp = &bootmem_node_data[node];
 
+	spfn = start >> PAGE_SHIFT;
 	epfn = (start + len) >> PAGE_SHIFT;
 
-	pages = bdp->node_low_pfn - (bdp->node_boot_start >> PAGE_SHIFT);
+	pages = bdp->node_low_pfn - bdp->node_min_pfn;
 	mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 
 	/*
 	 * Make sure this memory falls within this node's usable memory
 	 * since we may have thrown some away in build_maps().
 	 */
-	if (start < bdp->node_boot_start || epfn > bdp->node_low_pfn)
+	if (spfn < bdp->node_min_pfn || epfn > bdp->node_low_pfn)
 		return 0;
 
 	/* Don't setup this node's local space twice... */
@@ -296,7 +297,7 @@ static void __init reserve_pernode_space(void)
 		bdp = pdp->bdata;
 
 		/* First the bootmem_map itself */
-		pages = bdp->node_low_pfn - (bdp->node_boot_start>>PAGE_SHIFT);
+		pages = bdp->node_low_pfn - bdp->node_min_pfn;
 		size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 		base = __pa(bdp->node_bootmem_map);
 		reserve_bootmem_node(pdp, base, size, BOOTMEM_DEFAULT);
@@ -466,7 +467,7 @@ void __init find_memory(void)
 
 		init_bootmem_node(pgdat_list[node],
 				  map>>PAGE_SHIFT,
-				  bdp->node_boot_start>>PAGE_SHIFT,
+				  bdp->node_min_pfn,
 				  bdp->node_low_pfn);
 	}
 
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index cc23934bc41..cbc3c4c5456 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -123,8 +123,7 @@ unsigned long __init setup_memory(void)
 	return max_low_pfn;
 }
 
-#define START_PFN(nid)	\
-	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)		(NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
 
 unsigned long __init zone_sizes_init(void)
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index 28799af15e9..2554eb59cfe 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -93,8 +93,7 @@ void free_initrd_mem(unsigned long, unsigned long);
 #endif
 
 /* It'd be good if these lines were in the standard header file. */
-#define START_PFN(nid)	\
-	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)		(NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
 
 #ifndef CONFIG_DISCONTIGMEM
@@ -252,4 +251,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 	printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
 }
 #endif
-
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
index 8c5d88c7b90..8cee387a24f 100644
--- a/arch/mn10300/mm/init.c
+++ b/arch/mn10300/mm/init.c
@@ -67,8 +67,8 @@ void __init paging_init(void)
 
 	/* declare the sizes of the RAM zones (only use the normal zone) */
 	zones_size[ZONE_NORMAL] =
-		(contig_page_data.bdata->node_low_pfn) -
-		(contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+		contig_page_data.bdata->node_low_pfn -
+		contig_page_data.bdata->node_min_pfn;
 
 	/* pass the memory from the bootmem allocator to the main allocator */
 	free_area_init(zones_size);
@@ -87,7 +87,7 @@ void __init mem_init(void)
 	if (!mem_map)
 		BUG();
 
-#define START_PFN	(contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN	(contig_page_data.bdata->node_min_pfn)
 #define MAX_LOW_PFN	(contig_page_data.bdata->node_low_pfn)
 
 	max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index d7df26bd1e5..d652d375eb1 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -191,7 +191,7 @@ void __init paging_init(void)
 		pg_data_t *pgdat = NODE_DATA(nid);
 		unsigned long low, start_pfn;
 
-		start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
+		start_pfn = pgdat->bdata->node_min_pfn;
 		low = pgdat->bdata->node_low_pfn;
 
 		if (max_zone_pfns[ZONE_NORMAL] < low)
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 90921d10ffa..4ddf2922fc8 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -28,7 +28,7 @@ extern unsigned long saved_max_pfn;
  * memory pages (including holes) on the node.
  */
 typedef struct bootmem_data {
-	unsigned long node_boot_start;
+	unsigned long node_min_pfn;
 	unsigned long node_low_pfn;
 	void *node_bootmem_map;
 	unsigned long last_end_off;
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 282b786c2b1..4af15d0340a 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -80,7 +80,7 @@ static void __init link_bootmem(bootmem_data_t *bdata)
 		bootmem_data_t *ent;
 
 		ent = list_entry(iter, bootmem_data_t, list);
-		if (bdata->node_boot_start < ent->node_boot_start)
+		if (bdata->node_min_pfn < ent->node_min_pfn)
 			break;
 	}
 	list_add_tail(&bdata->list, iter);
@@ -96,7 +96,7 @@ static unsigned long __init init_bootmem_core(bootmem_data_t *bdata,
 
 	mminit_validate_memmodel_limits(&start, &end);
 	bdata->node_bootmem_map = phys_to_virt(PFN_PHYS(mapstart));
-	bdata->node_boot_start = PFN_PHYS(start);
+	bdata->node_min_pfn = start;
 	bdata->node_low_pfn = end;
 	link_bootmem(bdata);
 
@@ -151,7 +151,7 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 	if (!bdata->node_bootmem_map)
 		return 0;
 
-	start = PFN_DOWN(bdata->node_boot_start);
+	start = bdata->node_min_pfn;
 	end = bdata->node_low_pfn;
 
 	/*
@@ -167,7 +167,7 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 		unsigned long *map, idx, vec;
 
 		map = bdata->node_bootmem_map;
-		idx = start - PFN_DOWN(bdata->node_boot_start);
+		idx = start - bdata->node_min_pfn;
 		vec = ~map[idx / BITS_PER_LONG];
 
 		if (aligned && vec == ~0UL && start + BITS_PER_LONG < end) {
@@ -192,7 +192,7 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 	}
 
 	page = virt_to_page(bdata->node_bootmem_map);
-	pages = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
+	pages = bdata->node_low_pfn - bdata->node_min_pfn;
 	pages = bootmem_bootmap_pages(pages);
 	count += pages;
 	while (pages--)
@@ -231,8 +231,8 @@ static void __init __free(bootmem_data_t *bdata,
 	unsigned long idx;
 
 	bdebug("nid=%td start=%lx end=%lx\n", bdata - bootmem_node_data,
-		sidx + PFN_DOWN(bdata->node_boot_start),
-		eidx + PFN_DOWN(bdata->node_boot_start));
+		sidx + bdata->node_min_pfn,
+		eidx + bdata->node_min_pfn);
 
 	if (bdata->hint_idx > sidx)
 		bdata->hint_idx = sidx;
@@ -250,8 +250,8 @@ static int __init __reserve(bootmem_data_t *bdata, unsigned long sidx,
 
 	bdebug("nid=%td start=%lx end=%lx flags=%x\n",
 		bdata - bootmem_node_data,
-		sidx + PFN_DOWN(bdata->node_boot_start),
-		eidx + PFN_DOWN(bdata->node_boot_start),
+		sidx + bdata->node_min_pfn,
+		eidx + bdata->node_min_pfn,
 		flags);
 
 	for (idx = sidx; idx < eidx; idx++)
@@ -261,7 +261,7 @@ static int __init __reserve(bootmem_data_t *bdata, unsigned long sidx,
 				return -EBUSY;
 			}
 			bdebug("silent double reserve of PFN %lx\n",
-				idx + PFN_DOWN(bdata->node_boot_start));
+				idx + bdata->node_min_pfn);
 		}
 	return 0;
 }
@@ -275,11 +275,11 @@ static int __init mark_bootmem_node(bootmem_data_t *bdata,
 	bdebug("nid=%td start=%lx end=%lx reserve=%d flags=%x\n",
 		bdata - bootmem_node_data, start, end, reserve, flags);
 
-	BUG_ON(start < PFN_DOWN(bdata->node_boot_start));
+	BUG_ON(start < bdata->node_min_pfn);
 	BUG_ON(end > bdata->node_low_pfn);
 
-	sidx = start - PFN_DOWN(bdata->node_boot_start);
-	eidx = end - PFN_DOWN(bdata->node_boot_start);
+	sidx = start - bdata->node_min_pfn;
+	eidx = end - bdata->node_min_pfn;
 
 	if (reserve)
 		return __reserve(bdata, sidx, eidx, flags);
@@ -299,7 +299,8 @@ static int __init mark_bootmem(unsigned long start, unsigned long end,
 		int err;
 		unsigned long max;
 
-		if (pos < PFN_DOWN(bdata->node_boot_start)) {
+		if (pos < bdata->node_min_pfn ||
+		    pos >= bdata->node_low_pfn) {
 			BUG_ON(pos != start);
 			continue;
 		}
@@ -422,7 +423,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 		bdata - bootmem_node_data, size, PAGE_ALIGN(size) >> PAGE_SHIFT,
 		align, goal, limit);
 
-	min = PFN_DOWN(bdata->node_boot_start);
+	min = bdata->node_min_pfn;
 	max = bdata->node_low_pfn;
 
 	goal >>= PAGE_SHIFT;
@@ -440,8 +441,8 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 	else
 		start = ALIGN(min, step);
 
-	sidx = start - PFN_DOWN(bdata->node_boot_start);
-	midx = max - PFN_DOWN(bdata->node_boot_start);
+	sidx = start - bdata->node_min_pfn;;
+	midx = max - bdata->node_min_pfn;
 
 	if (bdata->hint_idx > sidx) {
 		/*
@@ -491,7 +492,8 @@ find_block:
 				PFN_UP(end_off), BOOTMEM_EXCLUSIVE))
 			BUG();
 
-		region = phys_to_virt(bdata->node_boot_start + start_off);
+		region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) +
+				start_off);
 		memset(region, 0, size);
 		return region;
 	}
@@ -518,7 +520,7 @@ restart:
 
 		if (goal && bdata->node_low_pfn <= PFN_DOWN(goal))
 			continue;
-		if (limit && bdata->node_boot_start >= limit)
+		if (limit && bdata->node_min_pfn >= PFN_DOWN(limit))
 			break;
 
 		region = alloc_bootmem_core(bdata, size, align, goal, limit);
-- 
cgit v1.2.3


From 2be0ffe2b29bd31d3debd0877797892ff2d91f4c Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Wed, 23 Jul 2008 21:28:11 -0700
Subject: mm: add alloc_pages_exact() and free_pages_exact()

alloc_pages_exact() is similar to alloc_pages(), except that it allocates
the minimum number of pages to fulfill the request.  This is useful if you
want to allocate a very large buffer that is slightly larger than an even
power-of-two number of pages.  In that case, alloc_pages() will waste a
lot of memory.

I have a video driver that wants to allocate a 5MB buffer.  alloc_pages()
wiill waste 3MB of physically-contiguous memory.

Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Andi Kleen <andi@firstfloor.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/gfp.h |  3 +++
 mm/page_alloc.c     | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index f640ed24142..e8003afeffb 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -228,6 +228,9 @@ extern struct page *alloc_page_vma(gfp_t gfp_mask,
 extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order);
 extern unsigned long get_zeroed_page(gfp_t gfp_mask);
 
+void *alloc_pages_exact(size_t size, gfp_t gfp_mask);
+void free_pages_exact(void *virt, size_t size);
+
 #define __get_free_page(gfp_mask) \
 		__get_free_pages((gfp_mask),0)
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index eaa86671ebb..8d528d57b40 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1697,6 +1697,59 @@ void free_pages(unsigned long addr, unsigned int order)
 
 EXPORT_SYMBOL(free_pages);
 
+/**
+ * alloc_pages_exact - allocate an exact number physically-contiguous pages.
+ * @size: the number of bytes to allocate
+ * @gfp_mask: GFP flags for the allocation
+ *
+ * This function is similar to alloc_pages(), except that it allocates the
+ * minimum number of pages to satisfy the request.  alloc_pages() can only
+ * allocate memory in power-of-two pages.
+ *
+ * This function is also limited by MAX_ORDER.
+ *
+ * Memory allocated by this function must be released by free_pages_exact().
+ */
+void *alloc_pages_exact(size_t size, gfp_t gfp_mask)
+{
+	unsigned int order = get_order(size);
+	unsigned long addr;
+
+	addr = __get_free_pages(gfp_mask, order);
+	if (addr) {
+		unsigned long alloc_end = addr + (PAGE_SIZE << order);
+		unsigned long used = addr + PAGE_ALIGN(size);
+
+		split_page(virt_to_page(addr), order);
+		while (used < alloc_end) {
+			free_page(used);
+			used += PAGE_SIZE;
+		}
+	}
+
+	return (void *)addr;
+}
+EXPORT_SYMBOL(alloc_pages_exact);
+
+/**
+ * free_pages_exact - release memory allocated via alloc_pages_exact()
+ * @virt: the value returned by alloc_pages_exact.
+ * @size: size of allocation, same value as passed to alloc_pages_exact().
+ *
+ * Release the memory allocated by a previous call to alloc_pages_exact.
+ */
+void free_pages_exact(void *virt, size_t size)
+{
+	unsigned long addr = (unsigned long)virt;
+	unsigned long end = addr + PAGE_ALIGN(size);
+
+	while (addr < end) {
+		free_page(addr);
+		addr += PAGE_SIZE;
+	}
+}
+EXPORT_SYMBOL(free_pages_exact);
+
 static unsigned int nr_free_zone_pages(int offset)
 {
 	struct zoneref *z;
-- 
cgit v1.2.3


From b69a7288ea7bf171328f313f0edae629f50e3bdb Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:28:12 -0700
Subject: mm/page_alloc.c: cleanups

This patch contains the following cleanups:
- make the following needlessly global variables static:
  - required_kernelcore
  - zone_movable_pfn[]
- make the following needlessly global functions static:
  - move_freepages()
  - move_freepages_block()
  - setup_pageset()
  - find_usable_zone_for_movable()
  - adjust_zone_range_for_zone_movable()
  - __absent_pages_in_range()
  - find_min_pfn_for_node()
  - find_zone_movable_pfns_for_nodes()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 8d528d57b40..cd4c41432ef 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -153,9 +153,9 @@ static unsigned long __meminitdata dma_reserve;
   static unsigned long __meminitdata node_boundary_start_pfn[MAX_NUMNODES];
   static unsigned long __meminitdata node_boundary_end_pfn[MAX_NUMNODES];
 #endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
-  unsigned long __initdata required_kernelcore;
+  static unsigned long __initdata required_kernelcore;
   static unsigned long __initdata required_movablecore;
-  unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
+  static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
 
   /* movable_zone is the "real" zone pages in ZONE_MOVABLE are taken from */
   int movable_zone;
@@ -674,9 +674,9 @@ static int fallbacks[MIGRATE_TYPES][MIGRATE_TYPES-1] = {
  * Note that start_page and end_pages are not aligned on a pageblock
  * boundary. If alignment is required, use move_freepages_block()
  */
-int move_freepages(struct zone *zone,
-			struct page *start_page, struct page *end_page,
-			int migratetype)
+static int move_freepages(struct zone *zone,
+			  struct page *start_page, struct page *end_page,
+			  int migratetype)
 {
 	struct page *page;
 	unsigned long order;
@@ -715,7 +715,8 @@ int move_freepages(struct zone *zone,
 	return pages_moved;
 }
 
-int move_freepages_block(struct zone *zone, struct page *page, int migratetype)
+static int move_freepages_block(struct zone *zone, struct page *page,
+				int migratetype)
 {
 	unsigned long start_pfn, end_pfn;
 	struct page *start_page, *end_page;
@@ -2652,7 +2653,7 @@ static int zone_batchsize(struct zone *zone)
 	return batch;
 }
 
-inline void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
+static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
 {
 	struct per_cpu_pages *pcp;
 
@@ -3099,7 +3100,7 @@ void __meminit get_pfn_range_for_nid(unsigned int nid,
  * assumption is made that zones within a node are ordered in monotonic
  * increasing memory addresses so that the "highest" populated zone is used
  */
-void __init find_usable_zone_for_movable(void)
+static void __init find_usable_zone_for_movable(void)
 {
 	int zone_index;
 	for (zone_index = MAX_NR_ZONES - 1; zone_index >= 0; zone_index--) {
@@ -3125,7 +3126,7 @@ void __init find_usable_zone_for_movable(void)
  * highest usable zone for ZONE_MOVABLE. This preserves the assumption that
  * zones within a node are in order of monotonic increases memory addresses
  */
-void __meminit adjust_zone_range_for_zone_movable(int nid,
+static void __meminit adjust_zone_range_for_zone_movable(int nid,
 					unsigned long zone_type,
 					unsigned long node_start_pfn,
 					unsigned long node_end_pfn,
@@ -3186,7 +3187,7 @@ static unsigned long __meminit zone_spanned_pages_in_node(int nid,
  * Return the number of holes in a range on a node. If nid is MAX_NUMNODES,
  * then all holes in the requested range will be accounted for.
  */
-unsigned long __meminit __absent_pages_in_range(int nid,
+static unsigned long __meminit __absent_pages_in_range(int nid,
 				unsigned long range_start_pfn,
 				unsigned long range_end_pfn)
 {
@@ -3723,7 +3724,7 @@ static void __init sort_node_map(void)
 }
 
 /* Find the lowest pfn for a node */
-unsigned long __init find_min_pfn_for_node(int nid)
+static unsigned long __init find_min_pfn_for_node(int nid)
 {
 	int i;
 	unsigned long min_pfn = ULONG_MAX;
@@ -3795,7 +3796,7 @@ static unsigned long __init early_calculate_totalpages(void)
  * memory. When they don't, some nodes will have more kernelcore than
  * others
  */
-void __init find_zone_movable_pfns_for_nodes(unsigned long *movable_pfn)
+static void __init find_zone_movable_pfns_for_nodes(unsigned long *movable_pfn)
 {
 	int i, nid;
 	unsigned long usable_startpfn;
-- 
cgit v1.2.3


From d92bc318547507a944a22e7ef936793dc0fe167f Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:28:12 -0700
Subject: mm: make register_page_bootmem_info_section() static

Make the needlessly global register_page_bootmem_info_section() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memory_hotplug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 6e26adc08f1..ec85c37dcfb 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -86,7 +86,7 @@ void put_page_bootmem(struct page *page)
 
 }
 
-void register_page_bootmem_info_section(unsigned long start_pfn)
+static void register_page_bootmem_info_section(unsigned long start_pfn)
 {
 	unsigned long *usemap, mapsize, section_nr, i;
 	struct mem_section *ms;
-- 
cgit v1.2.3


From 27ac792ca0b0a1e7e65f20342260650516c95864 Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Wed, 23 Jul 2008 21:28:13 -0700
Subject: PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures

On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
boundary. For example:

	u64 val = PAGE_ALIGN(size);

always returns a value < 4GB even if size is greater than 4GB.

The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
example):

#define PAGE_SHIFT      12
#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK       (~(PAGE_SIZE-1))
...
#define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)

The "~" is performed on a 32-bit value, so everything in "and" with
PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
Using the ALIGN() macro seems to be the right way, because it uses
typeof(addr) for the mask.

Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
include/linux/mm.h.

See also lkml discussion: http://lkml.org/lkml/2008/6/11/237

[akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
[akpm@linux-foundation.org: fix v850]
[akpm@linux-foundation.org: fix powerpc]
[akpm@linux-foundation.org: fix arm]
[akpm@linux-foundation.org: fix mips]
[akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
[akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
[akpm@linux-foundation.org: fix powerpc]
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/kernel/module.c                     | 1 +
 arch/arm/plat-omap/fb.c                      | 1 +
 arch/avr32/mm/ioremap.c                      | 1 +
 arch/h8300/kernel/setup.c                    | 1 +
 arch/m68k/amiga/chipram.c                    | 1 +
 arch/m68knommu/kernel/setup.c                | 1 +
 arch/mips/kernel/module.c                    | 1 +
 arch/mips/sgi-ip27/ip27-klnuma.c             | 1 +
 arch/powerpc/kernel/suspend.c                | 1 +
 arch/powerpc/lib/code-patching.c             | 1 +
 arch/sparc64/kernel/iommu_common.h           | 2 +-
 arch/x86/kernel/module_64.c                  | 1 +
 arch/xtensa/kernel/setup.c                   | 1 +
 drivers/char/random.c                        | 1 +
 drivers/ieee1394/iso.c                       | 1 +
 drivers/media/video/pvrusb2/pvrusb2-dvb.c    | 1 +
 drivers/media/video/pvrusb2/pvrusb2-ioread.c | 1 +
 drivers/media/video/uvc/uvc_queue.c          | 1 +
 drivers/media/video/videobuf-core.c          | 1 +
 drivers/mtd/maps/uclinux.c                   | 1 +
 drivers/net/mlx4/eq.c                        | 1 +
 drivers/pcmcia/electra_cf.c                  | 1 +
 drivers/scsi/sun_esp.c                       | 1 +
 drivers/video/acornfb.c                      | 1 +
 drivers/video/imxfb.c                        | 1 +
 drivers/video/omap/dispc.c                   | 1 +
 drivers/video/omap/omapfb_main.c             | 1 +
 drivers/video/pxafb.c                        | 1 +
 drivers/video/sa1100fb.c                     | 1 +
 include/asm-alpha/page.h                     | 3 ---
 include/asm-arm/page-nommu.h                 | 4 +---
 include/asm-arm/page.h                       | 3 ---
 include/asm-avr32/page.h                     | 3 ---
 include/asm-blackfin/page.h                  | 3 ---
 include/asm-cris/page.h                      | 3 ---
 include/asm-frv/page.h                       | 3 ---
 include/asm-h8300/page.h                     | 3 ---
 include/asm-ia64/page.h                      | 1 -
 include/asm-m32r/page.h                      | 3 ---
 include/asm-m68k/dvma.h                      | 2 +-
 include/asm-m68k/page.h                      | 3 ---
 include/asm-m68knommu/page.h                 | 3 ---
 include/asm-mips/page.h                      | 3 ---
 include/asm-mips/processor.h                 | 2 +-
 include/asm-mn10300/page.h                   | 3 ---
 include/asm-parisc/page.h                    | 4 ----
 include/asm-powerpc/page.h                   | 3 ---
 include/asm-s390/page.h                      | 3 ---
 include/asm-sh/page.h                        | 3 ---
 include/asm-sparc/page_32.h                  | 3 ---
 include/asm-sparc/page_64.h                  | 3 ---
 include/asm-um/page.h                        | 3 ---
 include/asm-v850/page.h                      | 4 ----
 include/asm-x86/page.h                       | 3 ---
 include/asm-xtensa/page.h                    | 2 --
 include/linux/mm.h                           | 3 +++
 sound/core/info.c                            | 1 +
 57 files changed, 36 insertions(+), 74 deletions(-)

diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 79b7e5cf541..a68259a0ccc 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/moduleloader.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 96d6f061973..5d107520e6b 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -23,6 +23,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
diff --git a/arch/avr32/mm/ioremap.c b/arch/avr32/mm/ioremap.c
index 3437c82434a..f03b79f0e0a 100644
--- a/arch/avr32/mm/ioremap.c
+++ b/arch/avr32/mm/ioremap.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/io.h>
 
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index b1f25c20a5d..7fda657110e 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/fb.h>
 #include <linux/console.h>
diff --git a/arch/m68k/amiga/chipram.c b/arch/m68k/amiga/chipram.c
index cbe36538af4..61df1d33c05 100644
--- a/arch/m68k/amiga/chipram.c
+++ b/arch/m68k/amiga/chipram.c
@@ -9,6 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 03f4fe6a2fc..5985f198902 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/module.h>
+#include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/errno.h>
 #include <linux/string.h>
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index e7ed0ac4853..1f60e27523d 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -22,6 +22,7 @@
 
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
+#include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index 48932ce1d73..d9c79d8be81 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -4,6 +4,7 @@
  * Copyright 2000 - 2001 Kanoj Sarcar (kanoj@sgi.com)
  */
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/kernel.h>
 #include <linux/nodemask.h>
diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c
index 8cee5710754..6fc6328dc62 100644
--- a/arch/powerpc/kernel/suspend.c
+++ b/arch/powerpc/kernel/suspend.c
@@ -7,6 +7,7 @@
  * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
  */
 
+#include <linux/mm.h>
 #include <asm/page.h>
 
 /* References to section boundaries */
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index 0559fe086eb..7c975d43e3f 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <asm/page.h>
 #include <asm/code-patching.h>
 
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index f3575a614fa..53b19c8231a 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -23,7 +23,7 @@
 #define IO_PAGE_SHIFT			13
 #define IO_PAGE_SIZE			(1UL << IO_PAGE_SHIFT)
 #define IO_PAGE_MASK			(~(IO_PAGE_SIZE-1))
-#define IO_PAGE_ALIGN(addr)		(((addr)+IO_PAGE_SIZE-1)&IO_PAGE_MASK)
+#define IO_PAGE_ALIGN(addr)		ALIGN(addr, IO_PAGE_SIZE)
 
 #define IO_TSB_ENTRIES			(128*1024)
 #define IO_TSB_SIZE			(IO_TSB_ENTRIES * 8)
diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module_64.c
index 0e867676b5a..6ba87830d4b 100644
--- a/arch/x86/kernel/module_64.c
+++ b/arch/x86/kernel/module_64.c
@@ -22,6 +22,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/bug.h>
 
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 5e6d75c9f92..a00359e8f7a 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -16,6 +16,7 @@
 
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/screen_info.h>
 #include <linux/bootmem.h>
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 0cf98bd4f2d..e0d0e371909 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -236,6 +236,7 @@
 #include <linux/fs.h>
 #include <linux/genhd.h>
 #include <linux/interrupt.h>
+#include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/percpu.h>
 #include <linux/cryptohash.h>
diff --git a/drivers/ieee1394/iso.c b/drivers/ieee1394/iso.c
index 07ca35c98f9..1cf6487b65b 100644
--- a/drivers/ieee1394/iso.c
+++ b/drivers/ieee1394/iso.c
@@ -11,6 +11,7 @@
 
 #include <linux/pci.h>
 #include <linux/sched.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 
 #include "hosts.h"
diff --git a/drivers/media/video/pvrusb2/pvrusb2-dvb.c b/drivers/media/video/pvrusb2/pvrusb2-dvb.c
index 6ec4bf81fc7..77b3c338506 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-dvb.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-dvb.c
@@ -20,6 +20,7 @@
 
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/mm.h>
 #include "dvbdev.h"
 #include "pvrusb2-debug.h"
 #include "pvrusb2-hdw-internal.h"
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
index 05a1376405e..b4824782d85 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ioread.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
@@ -22,6 +22,7 @@
 #include "pvrusb2-debug.h"
 #include <linux/errno.h>
 #include <linux/string.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index 7388d0cee3d..5646a6a3293 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -13,6 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/version.h>
+#include <linux/mm.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/usb.h>
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
index 0a88c44ace0..b7b05842cf2 100644
--- a/drivers/media/video/videobuf-core.c
+++ b/drivers/media/video/videobuf-core.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index c42f4b83f68..3fcf92130aa 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
+#include <linux/mm.h>
 #include <linux/major.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index e141a1513f0..ea3a09aaa84 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -33,6 +33,7 @@
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/mm.h>
 #include <linux/dma-mapping.h>
 
 #include <linux/mlx4/cmd.h>
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index c21f9a9c3e3..a34284b1482 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/of_platform.h>
 
diff --git a/drivers/scsi/sun_esp.c b/drivers/scsi/sun_esp.c
index 2c87db98cdf..f9cf7015136 100644
--- a/drivers/scsi/sun_esp.c
+++ b/drivers/scsi/sun_esp.c
@@ -7,6 +7,7 @@
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 
 #include <asm/irq.h>
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index eedb8285e32..017233d0c48 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -23,6 +23,7 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/slab.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/fb.h>
 #include <linux/platform_device.h>
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 94e4d3ac1a0..0c5a475c1ca 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -24,6 +24,7 @@
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index ab32ceb0617..ab77c51fe9d 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -20,6 +20,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/dma-mapping.h>
+#include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 14d0f7a1114..f85af5c4fa6 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -25,6 +25,7 @@
  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
 #include <linux/platform_device.h>
+#include <linux/mm.h>
 #include <linux/uaccess.h>
 
 #include <asm/mach-types.h>
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index bb251436950..5e8a140399f 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -30,6 +30,7 @@
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index ab2b2110478..4a9f7e12180 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -167,6 +167,7 @@
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff --git a/include/asm-alpha/page.h b/include/asm-alpha/page.h
index 22ff9762d17..0995f9d1341 100644
--- a/include/asm-alpha/page.h
+++ b/include/asm-alpha/page.h
@@ -80,9 +80,6 @@ typedef struct page *pgtable_t;
 
 #endif /* !__ASSEMBLY__ */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
 #define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
 #ifndef CONFIG_DISCONTIGMEM
diff --git a/include/asm-arm/page-nommu.h b/include/asm-arm/page-nommu.h
index a1bcad06048..ea1cde84f50 100644
--- a/include/asm-arm/page-nommu.h
+++ b/include/asm-arm/page-nommu.h
@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
 #ifndef _ASMARM_PAGE_NOMMU_H
 #define _ASMARM_PAGE_NOMMU_H
 
@@ -42,9 +43,6 @@ typedef unsigned long pgprot_t;
 #define __pmd(x)        (x)
 #define __pgprot(x)     (x)
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 8e05bdb5f12..7c5fc5582e5 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -15,9 +15,6 @@
 #define PAGE_SIZE		(1UL << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #ifndef __ASSEMBLY__
 
 #ifndef CONFIG_MMU
diff --git a/include/asm-avr32/page.h b/include/asm-avr32/page.h
index cbbc5ca9728..f805d1cb11b 100644
--- a/include/asm-avr32/page.h
+++ b/include/asm-avr32/page.h
@@ -57,9 +57,6 @@ static inline int get_order(unsigned long size)
 
 #endif /* !__ASSEMBLY__ */
 
-/* Align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
 /*
  * The hardware maps the virtual addresses 0x80000000 -> 0x9fffffff
  * permanently to the physical addresses 0x00000000 -> 0x1fffffff when
diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h
index c7db0220fbd..344f6a8c1f2 100644
--- a/include/asm-blackfin/page.h
+++ b/include/asm-blackfin/page.h
@@ -51,9 +51,6 @@ typedef struct page *pgtable_t;
 #define __pgd(x)	((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/include/asm-cris/page.h b/include/asm-cris/page.h
index c45bb1ef397..d19272ba6b6 100644
--- a/include/asm-cris/page.h
+++ b/include/asm-cris/page.h
@@ -60,9 +60,6 @@ typedef struct page *pgtable_t;
 
 #define page_to_phys(page)     __pa((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #ifndef __ASSEMBLY__
 
 #endif /* __ASSEMBLY__ */
diff --git a/include/asm-frv/page.h b/include/asm-frv/page.h
index c2c1e89e747..bd9c220094c 100644
--- a/include/asm-frv/page.h
+++ b/include/asm-frv/page.h
@@ -40,9 +40,6 @@ typedef struct page *pgtable_t;
 #define __pgprot(x)	((pgprot_t) { (x) } )
 #define PTE_MASK	PAGE_MASK
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
 #define devmem_is_allowed(pfn)	1
 
 #define __pa(vaddr)		virt_to_phys((void *) (unsigned long) (vaddr))
diff --git a/include/asm-h8300/page.h b/include/asm-h8300/page.h
index d6a3eaf3b27..0b6acf0b03a 100644
--- a/include/asm-h8300/page.h
+++ b/include/asm-h8300/page.h
@@ -43,9 +43,6 @@ typedef struct page *pgtable_t;
 #define __pgd(x)	((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h
index 36f39321b76..5f271bc712e 100644
--- a/include/asm-ia64/page.h
+++ b/include/asm-ia64/page.h
@@ -40,7 +40,6 @@
 
 #define PAGE_SIZE		(__IA64_UL_CONST(1) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE - 1))
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
 
 #define PERCPU_PAGE_SHIFT	16	/* log2() of max. size of per-CPU area */
 #define PERCPU_PAGE_SIZE	(__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
diff --git a/include/asm-m32r/page.h b/include/asm-m32r/page.h
index 8a677f3fca6..c9333089fe1 100644
--- a/include/asm-m32r/page.h
+++ b/include/asm-m32r/page.h
@@ -41,9 +41,6 @@ typedef struct page *pgtable_t;
 
 #endif /* !__ASSEMBLY__ */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
 /*
  * This handles the memory map.. We could make this a config
  * option, but too many people screw it up, and too few need
diff --git a/include/asm-m68k/dvma.h b/include/asm-m68k/dvma.h
index 4fff408d015..890bbf7e775 100644
--- a/include/asm-m68k/dvma.h
+++ b/include/asm-m68k/dvma.h
@@ -13,7 +13,7 @@
 #define DVMA_PAGE_SHIFT	13
 #define DVMA_PAGE_SIZE	(1UL << DVMA_PAGE_SHIFT)
 #define DVMA_PAGE_MASK	(~(DVMA_PAGE_SIZE-1))
-#define DVMA_PAGE_ALIGN(addr)	(((addr)+DVMA_PAGE_SIZE-1)&DVMA_PAGE_MASK)
+#define DVMA_PAGE_ALIGN(addr)	ALIGN(addr, DVMA_PAGE_SIZE)
 
 extern void dvma_init(void);
 extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h
index 880c2cbff8a..a34b8bad784 100644
--- a/include/asm-m68k/page.h
+++ b/include/asm-m68k/page.h
@@ -103,9 +103,6 @@ typedef struct page *pgtable_t;
 #define __pgd(x)	((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #endif /* !__ASSEMBLY__ */
 
 #include <asm/page_offset.h>
diff --git a/include/asm-m68knommu/page.h b/include/asm-m68knommu/page.h
index 1e82ebb7d64..3a1ede4544c 100644
--- a/include/asm-m68knommu/page.h
+++ b/include/asm-m68knommu/page.h
@@ -43,9 +43,6 @@ typedef struct page *pgtable_t;
 #define __pgd(x)	((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index 494f00ba954..fe7a88ea066 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -137,9 +137,6 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 
 #endif /* !__ASSEMBLY__ */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
 /*
  * __pa()/__va() should be used only during mem init.
  */
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index 58cbac5a64e..a1e4453469f 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -45,7 +45,7 @@ extern unsigned int vced_count, vcei_count;
  * This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
+#define TASK_UNMAPPED_BASE	((TASK_SIZE / 3) & ~(PAGE_SIZE))
 #endif
 
 #ifdef CONFIG_64BIT
diff --git a/include/asm-mn10300/page.h b/include/asm-mn10300/page.h
index 124971b9fb9..8288e124165 100644
--- a/include/asm-mn10300/page.h
+++ b/include/asm-mn10300/page.h
@@ -61,9 +61,6 @@ typedef struct page *pgtable_t;
 
 #endif /* !__ASSEMBLY__ */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
 /*
  * This handles the memory map.. We could make this a config
  * option, but too many people screw it up, and too few need
diff --git a/include/asm-parisc/page.h b/include/asm-parisc/page.h
index 27d50b85954..c3941f09a87 100644
--- a/include/asm-parisc/page.h
+++ b/include/asm-parisc/page.h
@@ -119,10 +119,6 @@ extern int npmem_ranges;
 #define PMD_ENTRY_SIZE	(1UL << BITS_PER_PMD_ENTRY)
 #define PTE_ENTRY_SIZE	(1UL << BITS_PER_PTE_ENTRY)
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-
 #define LINUX_GATEWAY_SPACE     0
 
 /* This governs the relationship between virtual and physical addresses.
diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h
index cffdf0eb0df..e088545cb3f 100644
--- a/include/asm-powerpc/page.h
+++ b/include/asm-powerpc/page.h
@@ -119,9 +119,6 @@ extern phys_addr_t kernstart_addr;
 /* align addr on a size boundary - adjust address up if needed */
 #define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	_ALIGN(addr, PAGE_SIZE)
-
 /*
  * Don't compare things with KERNELBASE or PAGE_OFFSET to test for
  * "kernelness", use is_kernel_addr() - it should do what you want.
diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h
index 12fd9c4f0f1..991ba939408 100644
--- a/include/asm-s390/page.h
+++ b/include/asm-s390/page.h
@@ -138,9 +138,6 @@ void arch_alloc_page(struct page *page, int order);
 
 #endif /* !__ASSEMBLY__ */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)        (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #define __PAGE_OFFSET           0x0UL
 #define PAGE_OFFSET             0x0UL
 #define __pa(x)                 (unsigned long)(x)
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
index 304c30b5d94..5dc01d2fcc4 100644
--- a/include/asm-sh/page.h
+++ b/include/asm-sh/page.h
@@ -22,9 +22,6 @@
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 #define PTE_MASK	PAGE_MASK
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
 #define HPAGE_SHIFT	16
 #elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
diff --git a/include/asm-sparc/page_32.h b/include/asm-sparc/page_32.h
index 14de518cc38..cf5fb70ca1c 100644
--- a/include/asm-sparc/page_32.h
+++ b/include/asm-sparc/page_32.h
@@ -134,9 +134,6 @@ BTFIXUPDEF_SETHI(sparc_unmapped_base)
 
 #endif /* !(__ASSEMBLY__) */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)  (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #define PAGE_OFFSET	0xf0000000
 #ifndef __ASSEMBLY__
 extern unsigned long phys_base;
diff --git a/include/asm-sparc/page_64.h b/include/asm-sparc/page_64.h
index a8a2bba032c..b579b910ef5 100644
--- a/include/asm-sparc/page_64.h
+++ b/include/asm-sparc/page_64.h
@@ -106,9 +106,6 @@ typedef struct page *pgtable_t;
 
 #endif /* !(__ASSEMBLY__) */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 /* We used to stick this into a hard-coded global register (%g4)
  * but that does not make sense anymore.
  */
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index 916e1a61999..335c57383c0 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -92,9 +92,6 @@ typedef struct page *pgtable_t;
 #define __pgd(x) ((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 extern unsigned long uml_physmem;
 
 #define PAGE_OFFSET (uml_physmem)
diff --git a/include/asm-v850/page.h b/include/asm-v850/page.h
index 74a539a9bd5..f9de35d873f 100644
--- a/include/asm-v850/page.h
+++ b/include/asm-v850/page.h
@@ -94,10 +94,6 @@ typedef unsigned long pgprot_t;
 #endif /* !__ASSEMBLY__ */
 
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
-
 /* No current v850 processor has virtual memory.  */
 #define __virt_to_phys(addr)	(addr)
 #define __phys_to_virt(addr)	(addr)
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index 6e02098b160..49982110e4d 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -34,9 +34,6 @@
 
 #define HUGE_MAX_HSTATE 2
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 #endif
diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h
index 80a6ae0dd25..11f7dc2dbec 100644
--- a/include/asm-xtensa/page.h
+++ b/include/asm-xtensa/page.h
@@ -26,13 +26,11 @@
 
 /*
  * PAGE_SHIFT determines the page size
- * PAGE_ALIGN(x) aligns the pointer to the (next) page boundary
  */
 
 #define PAGE_SHIFT		12
 #define PAGE_SIZE		(__XTENSA_UL_CONST(1) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE - 1) & PAGE_MASK)
 
 #define PAGE_OFFSET		XCHAL_KSEG_CACHED_VADDR
 #define MAX_MEM_PFN		XCHAL_KSEG_SIZE
diff --git a/include/linux/mm.h b/include/linux/mm.h
index df322fb4df3..d87a5a5fe87 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -41,6 +41,9 @@ extern unsigned long mmap_min_addr;
 
 #define nth_page(page,n) pfn_to_page(page_to_pfn((page)) + (n))
 
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE)
+
 /*
  * Linux kernel virtual memory manager primitives.
  * The idea being to have a "virtual" mm in the same way
diff --git a/sound/core/info.c b/sound/core/info.c
index cb5ead3e202..c67773ad929 100644
--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -21,6 +21,7 @@
 
 #include <linux/init.h>
 #include <linux/time.h>
+#include <linux/mm.h>
 #include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <sound/core.h>
-- 
cgit v1.2.3


From f84f9504bddeec33a72d64ebe95143d3aaeb3f9b Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Wed, 23 Jul 2008 21:28:14 -0700
Subject: mm: remove initialization of static per-cpu variables

This was required by some old, no-longer-used gcc on sparc.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/swap.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/mm/swap.c b/mm/swap.c
index 45c9f25a8a3..dd89234ee51 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -34,9 +34,9 @@
 /* How many pages do we try to swap or page in/out together? */
 int page_cluster;
 
-static DEFINE_PER_CPU(struct pagevec, lru_add_pvecs) = { 0, };
-static DEFINE_PER_CPU(struct pagevec, lru_add_active_pvecs) = { 0, };
-static DEFINE_PER_CPU(struct pagevec, lru_rotate_pvecs) = { 0, };
+static DEFINE_PER_CPU(struct pagevec, lru_add_pvecs);
+static DEFINE_PER_CPU(struct pagevec, lru_add_active_pvecs);
+static DEFINE_PER_CPU(struct pagevec, lru_rotate_pvecs);
 
 /*
  * This path almost never happens for VM activity - pages are normally
@@ -493,7 +493,7 @@ EXPORT_SYMBOL(pagevec_lookup_tag);
  */
 #define ACCT_THRESHOLD	max(16, NR_CPUS * 2)
 
-static DEFINE_PER_CPU(long, committed_space) = 0;
+static DEFINE_PER_CPU(long, committed_space);
 
 void vm_acct_memory(long pages)
 {
-- 
cgit v1.2.3


From 48c906823f3927b981db9f0b03c2e2499977ee93 Mon Sep 17 00:00:00 2001
From: Yasunori Goto <y-goto@jp.fujitsu.com>
Date: Wed, 23 Jul 2008 21:28:15 -0700
Subject: memory hotplug: allocate usemap on the section with pgdat

Usemaps are allocated on the section which has pgdat by this.

Because usemap size is very small, many other sections usemaps are
allocated on only one page.  If a section has usemap, it can't be removed
until removing other sections.  This dependency is not desirable for
memory removing.

Pgdat has similar feature.  When a section has pgdat area, it must be the
last section for removing on the node.  So, if section A has pgdat and
section B has usemap for section A, Both sections can't be removed due to
dependency each other.

To solve this issue, this patch collects usemap on same section with pgdat
as much as possible.  If other sections doesn't have any dependency, this
section will be able to be removed finally.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: David Miller <davem@davemloft.net>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hiroyuki KAMEZAWA <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/sparse.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 77 insertions(+), 1 deletion(-)

diff --git a/mm/sparse.c b/mm/sparse.c
index 7a3650923d9..8ffc0899000 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -269,16 +269,92 @@ static unsigned long *__kmalloc_section_usemap(void)
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
+#ifdef CONFIG_MEMORY_HOTREMOVE
+static unsigned long * __init
+sparse_early_usemap_alloc_pgdat_section(struct pglist_data *pgdat)
+{
+	unsigned long section_nr;
+
+	/*
+	 * A page may contain usemaps for other sections preventing the
+	 * page being freed and making a section unremovable while
+	 * other sections referencing the usemap retmain active. Similarly,
+	 * a pgdat can prevent a section being removed. If section A
+	 * contains a pgdat and section B contains the usemap, both
+	 * sections become inter-dependent. This allocates usemaps
+	 * from the same section as the pgdat where possible to avoid
+	 * this problem.
+	 */
+	section_nr = pfn_to_section_nr(__pa(pgdat) >> PAGE_SHIFT);
+	return alloc_bootmem_section(usemap_size(), section_nr);
+}
+
+static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
+{
+	unsigned long usemap_snr, pgdat_snr;
+	static unsigned long old_usemap_snr = NR_MEM_SECTIONS;
+	static unsigned long old_pgdat_snr = NR_MEM_SECTIONS;
+	struct pglist_data *pgdat = NODE_DATA(nid);
+	int usemap_nid;
+
+	usemap_snr = pfn_to_section_nr(__pa(usemap) >> PAGE_SHIFT);
+	pgdat_snr = pfn_to_section_nr(__pa(pgdat) >> PAGE_SHIFT);
+	if (usemap_snr == pgdat_snr)
+		return;
+
+	if (old_usemap_snr == usemap_snr && old_pgdat_snr == pgdat_snr)
+		/* skip redundant message */
+		return;
+
+	old_usemap_snr = usemap_snr;
+	old_pgdat_snr = pgdat_snr;
+
+	usemap_nid = sparse_early_nid(__nr_to_section(usemap_snr));
+	if (usemap_nid != nid) {
+		printk(KERN_INFO
+		       "node %d must be removed before remove section %ld\n",
+		       nid, usemap_snr);
+		return;
+	}
+	/*
+	 * There is a circular dependency.
+	 * Some platforms allow un-removable section because they will just
+	 * gather other removable sections for dynamic partitioning.
+	 * Just notify un-removable section's number here.
+	 */
+	printk(KERN_INFO "Section %ld and %ld (node %d)", usemap_snr,
+	       pgdat_snr, nid);
+	printk(KERN_CONT
+	       " have a circular dependency on usemap and pgdat allocations\n");
+}
+#else
+static unsigned long * __init
+sparse_early_usemap_alloc_pgdat_section(struct pglist_data *pgdat)
+{
+	return NULL;
+}
+
+static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
+{
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
+
 static unsigned long *__init sparse_early_usemap_alloc(unsigned long pnum)
 {
 	unsigned long *usemap;
 	struct mem_section *ms = __nr_to_section(pnum);
 	int nid = sparse_early_nid(ms);
 
-	usemap = alloc_bootmem_node(NODE_DATA(nid), usemap_size());
+	usemap = sparse_early_usemap_alloc_pgdat_section(NODE_DATA(nid));
 	if (usemap)
 		return usemap;
 
+	usemap = alloc_bootmem_node(NODE_DATA(nid), usemap_size());
+	if (usemap) {
+		check_usemap_section_nr(nid, usemap);
+		return usemap;
+	}
+
 	/* Stupid: suppress gcc warning for SPARSEMEM && !NUMA */
 	nid = 0;
 
-- 
cgit v1.2.3


From af370fb8cb3031f20438f246798d5f0d98089f29 Mon Sep 17 00:00:00 2001
From: Yasunori Goto <y-goto@jp.fujitsu.com>
Date: Wed, 23 Jul 2008 21:28:17 -0700
Subject: memory hotplug: small fixes to bootmem freeing for memory hotremove

- Change some naming
  * Magic -> types
  * MIX_INFO -> MIX_SECTION_INFO
  * Change definition of bootmem type from direct hex value

- __free_pages_bootmem() becomes __meminit.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/memory_hotplug.h |  8 ++++----
 mm/memory_hotplug.c            | 12 ++++++------
 mm/page_alloc.c                |  2 +-
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index ea9f5ad9ec8..3628e5088f6 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -13,12 +13,12 @@ struct mem_section;
 #ifdef CONFIG_MEMORY_HOTPLUG
 
 /*
- * Magic number for free bootmem.
+ * Types for free bootmem.
  * The normal smallest mapcount is -1. Here is smaller value than it.
  */
-#define SECTION_INFO		0xfffffffe
-#define MIX_INFO		0xfffffffd
-#define NODE_INFO		0xfffffffc
+#define SECTION_INFO		(-1 - 1)
+#define MIX_SECTION_INFO	(-1 - 2)
+#define NODE_INFO		(-1 - 3)
 
 /*
  * pgdat resizing functions
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index ec85c37dcfb..0fb05b258f0 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -62,9 +62,9 @@ static void release_memory_resource(struct resource *res)
 
 #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
 #ifndef CONFIG_SPARSEMEM_VMEMMAP
-static void get_page_bootmem(unsigned long info,  struct page *page, int magic)
+static void get_page_bootmem(unsigned long info,  struct page *page, int type)
 {
-	atomic_set(&page->_mapcount, magic);
+	atomic_set(&page->_mapcount, type);
 	SetPagePrivate(page);
 	set_page_private(page, info);
 	atomic_inc(&page->_count);
@@ -72,10 +72,10 @@ static void get_page_bootmem(unsigned long info,  struct page *page, int magic)
 
 void put_page_bootmem(struct page *page)
 {
-	int magic;
+	int type;
 
-	magic = atomic_read(&page->_mapcount);
-	BUG_ON(magic >= -1);
+	type = atomic_read(&page->_mapcount);
+	BUG_ON(type >= -1);
 
 	if (atomic_dec_return(&page->_count) == 1) {
 		ClearPagePrivate(page);
@@ -119,7 +119,7 @@ static void register_page_bootmem_info_section(unsigned long start_pfn)
 	mapsize = PAGE_ALIGN(usemap_size()) >> PAGE_SHIFT;
 
 	for (i = 0; i < mapsize; i++, page++)
-		get_page_bootmem(section_nr, page, MIX_INFO);
+		get_page_bootmem(section_nr, page, MIX_SECTION_INFO);
 
 }
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index cd4c41432ef..6da667274df 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -533,7 +533,7 @@ static void __free_pages_ok(struct page *page, unsigned int order)
 /*
  * permit the bootmem allocator to evade page validation on high-order frees
  */
-void __free_pages_bootmem(struct page *page, unsigned int order)
+void __meminit __free_pages_bootmem(struct page *page, unsigned int order)
 {
 	if (order == 0) {
 		__ClearPageReserved(page);
-- 
cgit v1.2.3


From 2f7f24eca31c4fc2fdb134b2ef743ccd67cfb9a9 Mon Sep 17 00:00:00 2001
From: Kent Liu <kent.liu@linux.intel.com>
Date: Wed, 23 Jul 2008 21:28:18 -0700
Subject: memory-hotplug: don't calculate vm_total_pages twice when rebuilding
 zonelists in online_pages()

If zonelist is required to be rebuilt in online_pages(), there is no need
to recalculate vm_total_pages in that function, as it has been updated in
the call build_all_zonelists().

Signed-off-by: Kent Liu <kent.liu@linux.intel.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memory_hotplug.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 0fb05b258f0..93aba78dc8b 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -429,7 +429,9 @@ int online_pages(unsigned long pfn, unsigned long nr_pages)
 
 	if (need_zonelists_rebuild)
 		build_all_zonelists();
-	vm_total_pages = nr_free_pagecache_pages();
+	else
+		vm_total_pages = nr_free_pagecache_pages();
+
 	writeback_set_ratelimit();
 
 	if (onlined_pages)
-- 
cgit v1.2.3


From 5c755e9fd813810680abd56ec09a5f90143e815b Mon Sep 17 00:00:00 2001
From: Badari Pulavarty <pbadari@us.ibm.com>
Date: Wed, 23 Jul 2008 21:28:19 -0700
Subject: memory-hotplug: add sysfs removable attribute for hotplug memory
 remove

Memory may be hot-removed on a per-memory-block basis, particularly on
POWER where the SPARSEMEM section size often matches the memory-block
size.  A user-level agent must be able to identify which sections of
memory are likely to be removable before attempting the potentially
expensive operation.  This patch adds a file called "removable" to the
memory directory in sysfs to help such an agent.  In this patch, a memory
block is considered removable if;

o It contains only MOVABLE pageblocks
o It contains only pageblocks with free pages regardless of pageblock type

On the other hand, a memory block starting with a PageReserved() page will
never be considered removable.  Without this patch, the user-agent is
forced to choose a memory block to remove randomly.

Sample output of the sysfs files:

./memory/memory0/removable: 0
./memory/memory1/removable: 0
./memory/memory2/removable: 0
./memory/memory3/removable: 0
./memory/memory4/removable: 0
./memory/memory5/removable: 0
./memory/memory6/removable: 0
./memory/memory7/removable: 1
./memory/memory8/removable: 0
./memory/memory9/removable: 0
./memory/memory10/removable: 0
./memory/memory11/removable: 0
./memory/memory12/removable: 0
./memory/memory13/removable: 0
./memory/memory14/removable: 0
./memory/memory15/removable: 0
./memory/memory16/removable: 0
./memory/memory17/removable: 1
./memory/memory18/removable: 1
./memory/memory19/removable: 1
./memory/memory20/removable: 1
./memory/memory21/removable: 1
./memory/memory22/removable: 1

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/ABI/testing/sysfs-devices-memory | 24 +++++++++++
 drivers/base/memory.c                          | 19 ++++++++
 include/linux/memory_hotplug.h                 | 12 ++++++
 mm/memory_hotplug.c                            | 60 ++++++++++++++++++++++++++
 4 files changed, 115 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-devices-memory

diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
new file mode 100644
index 00000000000..7a16fe1e227
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -0,0 +1,24 @@
+What:		/sys/devices/system/memory
+Date:		June 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The /sys/devices/system/memory contains a snapshot of the
+		internal state of the kernel memory blocks. Files could be
+		added or removed dynamically to represent hot-add/remove
+		operations.
+
+Users:		hotplug memory add/remove tools
+		https://w3.opensource.ibm.com/projects/powerpc-utils/
+
+What:		/sys/devices/system/memory/memoryX/removable
+Date:		June 2008
+Contact:	Badari Pulavarty <pbadari@us.ibm.com>
+Description:
+		The file /sys/devices/system/memory/memoryX/removable
+		indicates whether this memory block is removable or not.
+		This is useful for a user-level agent to determine
+		identify removable sections of the memory before attempting
+		potentially expensive hot-remove memory operation
+
+Users:		hotplug memory remove tools
+		https://w3.opensource.ibm.com/projects/powerpc-utils/
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 4d4e0e7b6e9..855ed1a9f97 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -100,6 +100,21 @@ static ssize_t show_mem_phys_index(struct sys_device *dev,
 	return sprintf(buf, "%08lx\n", mem->phys_index);
 }
 
+/*
+ * Show whether the section of memory is likely to be hot-removable
+ */
+static ssize_t show_mem_removable(struct sys_device *dev, char *buf)
+{
+	unsigned long start_pfn;
+	int ret;
+	struct memory_block *mem =
+		container_of(dev, struct memory_block, sysdev);
+
+	start_pfn = section_nr_to_pfn(mem->phys_index);
+	ret = is_mem_section_removable(start_pfn, PAGES_PER_SECTION);
+	return sprintf(buf, "%d\n", ret);
+}
+
 /*
  * online, offline, going offline, etc.
  */
@@ -262,6 +277,7 @@ static ssize_t show_phys_device(struct sys_device *dev,
 static SYSDEV_ATTR(phys_index, 0444, show_mem_phys_index, NULL);
 static SYSDEV_ATTR(state, 0644, show_mem_state, store_mem_state);
 static SYSDEV_ATTR(phys_device, 0444, show_phys_device, NULL);
+static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL);
 
 #define mem_create_simple_file(mem, attr_name)	\
 	sysdev_create_file(&mem->sysdev, &attr_##attr_name)
@@ -350,6 +366,8 @@ static int add_memory_block(unsigned long node_id, struct mem_section *section,
 		ret = mem_create_simple_file(mem, state);
 	if (!ret)
 		ret = mem_create_simple_file(mem, phys_device);
+	if (!ret)
+		ret = mem_create_simple_file(mem, removable);
 
 	return ret;
 }
@@ -394,6 +412,7 @@ int remove_memory_block(unsigned long node_id, struct mem_section *section,
 	mem_remove_simple_file(mem, phys_index);
 	mem_remove_simple_file(mem, state);
 	mem_remove_simple_file(mem, phys_device);
+	mem_remove_simple_file(mem, removable);
 	unregister_memory(mem, section);
 
 	return 0;
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 3628e5088f6..763ba81fc0f 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -199,6 +199,18 @@ extern int walk_memory_resource(unsigned long start_pfn,
 			unsigned long nr_pages, void *arg,
 			int (*func)(unsigned long, unsigned long, void *));
 
+#ifdef CONFIG_MEMORY_HOTREMOVE
+
+extern int is_mem_section_removable(unsigned long pfn, unsigned long nr_pages);
+
+#else
+static inline int is_mem_section_removable(unsigned long pfn,
+					unsigned long nr_pages)
+{
+	return 0;
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
+
 extern int add_memory(int nid, u64 start, u64 size);
 extern int arch_add_memory(int nid, u64 start, u64 size);
 extern int remove_memory(u64 start, u64 size);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 93aba78dc8b..89fee2dcb03 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -522,6 +522,66 @@ error:
 EXPORT_SYMBOL_GPL(add_memory);
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
+/*
+ * A free page on the buddy free lists (not the per-cpu lists) has PageBuddy
+ * set and the size of the free page is given by page_order(). Using this,
+ * the function determines if the pageblock contains only free pages.
+ * Due to buddy contraints, a free page at least the size of a pageblock will
+ * be located at the start of the pageblock
+ */
+static inline int pageblock_free(struct page *page)
+{
+	return PageBuddy(page) && page_order(page) >= pageblock_order;
+}
+
+/* Return the start of the next active pageblock after a given page */
+static struct page *next_active_pageblock(struct page *page)
+{
+	int pageblocks_stride;
+
+	/* Ensure the starting page is pageblock-aligned */
+	BUG_ON(page_to_pfn(page) & (pageblock_nr_pages - 1));
+
+	/* Move forward by at least 1 * pageblock_nr_pages */
+	pageblocks_stride = 1;
+
+	/* If the entire pageblock is free, move to the end of free page */
+	if (pageblock_free(page))
+		pageblocks_stride += page_order(page) - pageblock_order;
+
+	return page + (pageblocks_stride * pageblock_nr_pages);
+}
+
+/* Checks if this range of memory is likely to be hot-removable. */
+int is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages)
+{
+	int type;
+	struct page *page = pfn_to_page(start_pfn);
+	struct page *end_page = page + nr_pages;
+
+	/* Check the starting page of each pageblock within the range */
+	for (; page < end_page; page = next_active_pageblock(page)) {
+		type = get_pageblock_migratetype(page);
+
+		/*
+		 * A pageblock containing MOVABLE or free pages is considered
+		 * removable
+		 */
+		if (type != MIGRATE_MOVABLE && !pageblock_free(page))
+			return 0;
+
+		/*
+		 * A pageblock starting with a PageReserved page is not
+		 * considered removable.
+		 */
+		if (PageReserved(page))
+			return 0;
+	}
+
+	/* All pageblocks in the memory block are likely to be hot-removable */
+	return 1;
+}
+
 /*
  * Confirm all pages in a range [start, end) is belongs to the same zone.
  */
-- 
cgit v1.2.3


From 9ca908f47bc784c90e17a553ce33e756c73feac4 Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Wed, 23 Jul 2008 21:28:20 -0700
Subject: kcalloc: remove runtime division

While in all cases in the kernel we know the size of the elements to be
created, we don't always know the count of elements.  By commuting the size
and count in the overflow check, the compiler can reduce the runtime division
of size_t with a compare to a (unique) constant in these cases.

Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/slab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/slab.h b/include/linux/slab.h
index 9aa90a6f20e..41103910f8a 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -180,7 +180,7 @@ size_t ksize(const void *);
  */
 static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
 {
-	if (n != 0 && size > ULONG_MAX / n)
+	if (size != 0 && n > ULONG_MAX / size)
 		return NULL;
 	return __kmalloc(n * size, flags | __GFP_ZERO);
 }
-- 
cgit v1.2.3


From 83d1674a946141c3c59d430e96c224f7937e6158 Mon Sep 17 00:00:00 2001
From: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Date: Wed, 23 Jul 2008 21:28:22 -0700
Subject: mm: make CONFIG_MIGRATION available w/o CONFIG_NUMA

We'd like to support CONFIG_MEMORY_HOTREMOVE on s390, which depends on
CONFIG_MIGRATION.  So far, CONFIG_MIGRATION is only available with NUMA
support.

This patch makes CONFIG_MIGRATION selectable for architectures that define
ARCH_ENABLE_MEMORY_HOTREMOVE.  When MIGRATION is enabled w/o NUMA, the
kernel won't compile because migrate_vmas() does not know about
vm_ops->migrate() and vma_migratable() does not know about policy_zone.
To fix this, those two functions can be restricted to '#ifdef CONFIG_NUMA'
because they are not being used w/o NUMA.  vma_migratable() is moved over
from migrate.h to mempolicy.h.

[kosaki.motohiro@jp.fujitsu.com: build fix]
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: KOSAKI Motorhiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/mempolicy.h | 19 +++++++++++++++++++
 include/linux/migrate.h   | 21 ---------------------
 mm/Kconfig                |  2 +-
 mm/migrate.c              |  2 +-
 4 files changed, 21 insertions(+), 23 deletions(-)

diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index 3a39570b81b..085c903fe0f 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -59,6 +59,7 @@ enum {
 #include <linux/rbtree.h>
 #include <linux/spinlock.h>
 #include <linux/nodemask.h>
+#include <linux/pagemap.h>
 
 struct mm_struct;
 
@@ -220,6 +221,24 @@ extern int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context);
 extern int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol,
 			int no_context);
 #endif
+
+/* Check if a vma is migratable */
+static inline int vma_migratable(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED))
+		return 0;
+	/*
+	 * Migration allocates pages in the highest zone. If we cannot
+	 * do so then migration (at least from node to node) is not
+	 * possible.
+	 */
+	if (vma->vm_file &&
+		gfp_zone(mapping_gfp_mask(vma->vm_file->f_mapping))
+								< policy_zone)
+			return 0;
+	return 1;
+}
+
 #else
 
 struct mempolicy {};
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
index e10a90a93b5..03aea612d28 100644
--- a/include/linux/migrate.h
+++ b/include/linux/migrate.h
@@ -3,28 +3,10 @@
 
 #include <linux/mm.h>
 #include <linux/mempolicy.h>
-#include <linux/pagemap.h>
 
 typedef struct page *new_page_t(struct page *, unsigned long private, int **);
 
 #ifdef CONFIG_MIGRATION
-/* Check if a vma is migratable */
-static inline int vma_migratable(struct vm_area_struct *vma)
-{
-	if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED))
-		return 0;
-	/*
-	 * Migration allocates pages in the highest zone. If we cannot
-	 * do so then migration (at least from node to node) is not
-	 * possible.
-	 */
-	if (vma->vm_file &&
-		gfp_zone(mapping_gfp_mask(vma->vm_file->f_mapping))
-								< policy_zone)
-			return 0;
-	return 1;
-}
-
 extern int isolate_lru_page(struct page *p, struct list_head *pagelist);
 extern int putback_lru_pages(struct list_head *l);
 extern int migrate_page(struct address_space *,
@@ -39,9 +21,6 @@ extern int migrate_vmas(struct mm_struct *mm,
 		const nodemask_t *from, const nodemask_t *to,
 		unsigned long flags);
 #else
-static inline int vma_migratable(struct vm_area_struct *vma)
-					{ return 0; }
-
 static inline int isolate_lru_page(struct page *p, struct list_head *list)
 					{ return -ENOSYS; }
 static inline int putback_lru_pages(struct list_head *l) { return 0; }
diff --git a/mm/Kconfig b/mm/Kconfig
index c4de85285bb..aa799007a11 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -174,7 +174,7 @@ config SPLIT_PTLOCK_CPUS
 config MIGRATION
 	bool "Page migration"
 	def_bool y
-	depends on NUMA
+	depends on NUMA || ARCH_ENABLE_MEMORY_HOTREMOVE
 	help
 	  Allows the migration of the physical location of pages of processes
 	  while the virtual addresses are not changed. This is useful for
diff --git a/mm/migrate.c b/mm/migrate.c
index e7d13a708da..376cceba82f 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1071,7 +1071,6 @@ out2:
 	mmput(mm);
 	return err;
 }
-#endif
 
 /*
  * Call migration functions in the vma_ops that may prepare
@@ -1093,3 +1092,4 @@ int migrate_vmas(struct mm_struct *mm, const nodemask_t *to,
  	}
  	return err;
 }
+#endif
-- 
cgit v1.2.3


From 78ecba081224a2db5876b6b81cfed0b78f58adc7 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Wed, 23 Jul 2008 21:28:23 -0700
Subject: mm: fix ever-decreasing swap priority

Vegard Nossum has noticed the ever-decreasing negative priority in a
swapon /swapoff loop, which eventually would misprioritize when int wraps
positive.  Not worth spending much code on, but probably better fixed.

It's easy to handle the swapping on and off of just one area, but there's
not much point if a pair or more still misbehave.  To handle the general
case, swapoff should compact negative priorities, keeping them always from
-1 to -MAX_SWAPFILES.  That's a change, but should cause no regression,
since these negative (unspecified) priorities are disjoint from the the
positive specified priorities 0 to 32767.

One small functional difference, which seems appropriate: when swapoff
fails to free all swap from a negative priority area, that area is now
reinserted at lowest priority, rather than at its original priority.

In moving down swapon's setting of priority, I notice that an area is
visible to /proc/swaps when it has swap_map set, yet that was being set
before all the visible fields were properly filled in: corrected.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/swapfile.c | 49 +++++++++++++++++++++++++------------------------
 1 file changed, 25 insertions(+), 24 deletions(-)

diff --git a/mm/swapfile.c b/mm/swapfile.c
index bd1bb592030..2f33edb8bee 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -37,6 +37,7 @@ DEFINE_SPINLOCK(swap_lock);
 unsigned int nr_swapfiles;
 long total_swap_pages;
 static int swap_overflow;
+static int least_priority;
 
 static const char Bad_file[] = "Bad swap file entry ";
 static const char Unused_file[] = "Unused swap file entry ";
@@ -1260,6 +1261,11 @@ asmlinkage long sys_swapoff(const char __user * specialfile)
 		/* just pick something that's safe... */
 		swap_list.next = swap_list.head;
 	}
+	if (p->prio < 0) {
+		for (i = p->next; i >= 0; i = swap_info[i].next)
+			swap_info[i].prio = p->prio--;
+		least_priority++;
+	}
 	nr_swap_pages -= p->pages;
 	total_swap_pages -= p->pages;
 	p->flags &= ~SWP_WRITEOK;
@@ -1272,9 +1278,14 @@ asmlinkage long sys_swapoff(const char __user * specialfile)
 	if (err) {
 		/* re-insert swap space back into swap_list */
 		spin_lock(&swap_lock);
-		for (prev = -1, i = swap_list.head; i >= 0; prev = i, i = swap_info[i].next)
+		if (p->prio < 0)
+			p->prio = --least_priority;
+		prev = -1;
+		for (i = swap_list.head; i >= 0; i = swap_info[i].next) {
 			if (p->prio >= swap_info[i].prio)
 				break;
+			prev = i;
+		}
 		p->next = i;
 		if (prev < 0)
 			swap_list.head = swap_list.next = p - swap_info;
@@ -1447,7 +1458,6 @@ asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
 	unsigned int type;
 	int i, prev;
 	int error;
-	static int least_priority;
 	union swap_header *swap_header = NULL;
 	int swap_header_version;
 	unsigned int nr_good_pages = 0;
@@ -1455,7 +1465,7 @@ asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
 	sector_t span;
 	unsigned long maxpages = 1;
 	int swapfilesize;
-	unsigned short *swap_map;
+	unsigned short *swap_map = NULL;
 	struct page *page = NULL;
 	struct inode *inode = NULL;
 	int did_down = 0;
@@ -1474,22 +1484,10 @@ asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
 	}
 	if (type >= nr_swapfiles)
 		nr_swapfiles = type+1;
+	memset(p, 0, sizeof(*p));
 	INIT_LIST_HEAD(&p->extent_list);
 	p->flags = SWP_USED;
-	p->swap_file = NULL;
-	p->old_block_size = 0;
-	p->swap_map = NULL;
-	p->lowest_bit = 0;
-	p->highest_bit = 0;
-	p->cluster_nr = 0;
-	p->inuse_pages = 0;
 	p->next = -1;
-	if (swap_flags & SWAP_FLAG_PREFER) {
-		p->prio =
-		  (swap_flags & SWAP_FLAG_PRIO_MASK)>>SWAP_FLAG_PRIO_SHIFT;
-	} else {
-		p->prio = --least_priority;
-	}
 	spin_unlock(&swap_lock);
 	name = getname(specialfile);
 	error = PTR_ERR(name);
@@ -1632,19 +1630,20 @@ asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
 			goto bad_swap;
 
 		/* OK, set up the swap map and apply the bad block list */
-		if (!(p->swap_map = vmalloc(maxpages * sizeof(short)))) {
+		swap_map = vmalloc(maxpages * sizeof(short));
+		if (!swap_map) {
 			error = -ENOMEM;
 			goto bad_swap;
 		}
 
 		error = 0;
-		memset(p->swap_map, 0, maxpages * sizeof(short));
+		memset(swap_map, 0, maxpages * sizeof(short));
 		for (i = 0; i < swap_header->info.nr_badpages; i++) {
 			int page_nr = swap_header->info.badpages[i];
 			if (page_nr <= 0 || page_nr >= swap_header->info.last_page)
 				error = -EINVAL;
 			else
-				p->swap_map[page_nr] = SWAP_MAP_BAD;
+				swap_map[page_nr] = SWAP_MAP_BAD;
 		}
 		nr_good_pages = swap_header->info.last_page -
 				swap_header->info.nr_badpages -
@@ -1654,7 +1653,7 @@ asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
 	}
 
 	if (nr_good_pages) {
-		p->swap_map[0] = SWAP_MAP_BAD;
+		swap_map[0] = SWAP_MAP_BAD;
 		p->max = maxpages;
 		p->pages = nr_good_pages;
 		nr_extents = setup_swap_extents(p, &span);
@@ -1672,6 +1671,12 @@ asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
 
 	mutex_lock(&swapon_mutex);
 	spin_lock(&swap_lock);
+	if (swap_flags & SWAP_FLAG_PREFER)
+		p->prio =
+		  (swap_flags & SWAP_FLAG_PRIO_MASK) >> SWAP_FLAG_PRIO_SHIFT;
+	else
+		p->prio = --least_priority;
+	p->swap_map = swap_map;
 	p->flags = SWP_ACTIVE;
 	nr_swap_pages += nr_good_pages;
 	total_swap_pages += nr_good_pages;
@@ -1707,12 +1712,8 @@ bad_swap:
 	destroy_swap_extents(p);
 bad_swap_2:
 	spin_lock(&swap_lock);
-	swap_map = p->swap_map;
 	p->swap_file = NULL;
-	p->swap_map = NULL;
 	p->flags = 0;
-	if (!(swap_flags & SWAP_FLAG_PREFER))
-		++least_priority;
 	spin_unlock(&swap_lock);
 	vfree(swap_map);
 	if (swap_file)
-- 
cgit v1.2.3


From 5459c164f0591ee75ed0203bb8f3817f25948e2f Mon Sep 17 00:00:00 2001
From: "Andrew G. Morgan" <morgan@kernel.org>
Date: Wed, 23 Jul 2008 21:28:24 -0700
Subject: security: protect legacy applications from executing with
 insufficient privilege

When cap_bset suppresses some of the forced (fP) capabilities of a file,
it is generally only safe to execute the program if it understands how to
recognize it doesn't have enough privilege to work correctly.  For legacy
applications (fE!=0), which have no non-destructive way to determine that
they are missing privilege, we fail to execute (EPERM) any executable that
requires fP capabilities, but would otherwise get pP' < fP.  This is a
fail-safe permission check.

For some discussion of why it is problematic for (legacy) privileged
applications to run with less than the set of capabilities requested for
them, see:

 http://userweb.kernel.org/~morgan/sendmail-capabilities-war-story.html

With this iteration of this support, we do not include setuid-0 based
privilege protection from the bounding set.  That is, the admin can still
(ab)use the bounding set to suppress the privileges of a setuid-0 program.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/binfmts.h |   2 +-
 security/commoncap.c    | 108 ++++++++++++++++++++++++++----------------------
 2 files changed, 60 insertions(+), 50 deletions(-)

diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index ee0ed48e834..826f6235080 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -38,7 +38,7 @@ struct linux_binprm{
 		     misc_bang:1;
 	struct file * file;
 	int e_uid, e_gid;
-	kernel_cap_t cap_inheritable, cap_permitted;
+	kernel_cap_t cap_post_exec_permitted;
 	bool cap_effective;
 	void *security;
 	int argc, envc;
diff --git a/security/commoncap.c b/security/commoncap.c
index 0b6537a3672..4afbece37a0 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -162,8 +162,7 @@ void cap_capset_set (struct task_struct *target, kernel_cap_t *effective,
 
 static inline void bprm_clear_caps(struct linux_binprm *bprm)
 {
-	cap_clear(bprm->cap_inheritable);
-	cap_clear(bprm->cap_permitted);
+	cap_clear(bprm->cap_post_exec_permitted);
 	bprm->cap_effective = false;
 }
 
@@ -198,6 +197,7 @@ static inline int cap_from_disk(struct vfs_cap_data *caps,
 {
 	__u32 magic_etc;
 	unsigned tocopy, i;
+	int ret;
 
 	if (size < sizeof(magic_etc))
 		return -EINVAL;
@@ -225,19 +225,40 @@ static inline int cap_from_disk(struct vfs_cap_data *caps,
 		bprm->cap_effective = false;
 	}
 
-	for (i = 0; i < tocopy; ++i) {
-		bprm->cap_permitted.cap[i] =
-			le32_to_cpu(caps->data[i].permitted);
-		bprm->cap_inheritable.cap[i] =
-			le32_to_cpu(caps->data[i].inheritable);
-	}
-	while (i < VFS_CAP_U32) {
-		bprm->cap_permitted.cap[i] = 0;
-		bprm->cap_inheritable.cap[i] = 0;
-		i++;
+	ret = 0;
+
+	CAP_FOR_EACH_U32(i) {
+		__u32 value_cpu;
+
+		if (i >= tocopy) {
+			/*
+			 * Legacy capability sets have no upper bits
+			 */
+			bprm->cap_post_exec_permitted.cap[i] = 0;
+			continue;
+		}
+		/*
+		 * pP' = (X & fP) | (pI & fI)
+		 */
+		value_cpu = le32_to_cpu(caps->data[i].permitted);
+		bprm->cap_post_exec_permitted.cap[i] =
+			(current->cap_bset.cap[i] & value_cpu) |
+			(current->cap_inheritable.cap[i] &
+				le32_to_cpu(caps->data[i].inheritable));
+		if (value_cpu & ~bprm->cap_post_exec_permitted.cap[i]) {
+			/*
+			 * insufficient to execute correctly
+			 */
+			ret = -EPERM;
+		}
 	}
 
-	return 0;
+	/*
+	 * For legacy apps, with no internal support for recognizing they
+	 * do not have enough capabilities, we return an error if they are
+	 * missing some "forced" (aka file-permitted) capabilities.
+	 */
+	return bprm->cap_effective ? ret : 0;
 }
 
 /* Locate any VFS capabilities: */
@@ -269,9 +290,9 @@ static int get_file_caps(struct linux_binprm *bprm)
 		goto out;
 
 	rc = cap_from_disk(&vcaps, bprm, rc);
-	if (rc)
+	if (rc == -EINVAL)
 		printk(KERN_NOTICE "%s: cap_from_disk returned %d for %s\n",
-			__func__, rc, bprm->filename);
+		       __func__, rc, bprm->filename);
 
 out:
 	dput(dentry);
@@ -304,25 +325,24 @@ int cap_bprm_set_security (struct linux_binprm *bprm)
 	int ret;
 
 	ret = get_file_caps(bprm);
-	if (ret)
-		printk(KERN_NOTICE "%s: get_file_caps returned %d for %s\n",
-			__func__, ret, bprm->filename);
-
-	/*  To support inheritance of root-permissions and suid-root
-	 *  executables under compatibility mode, we raise all three
-	 *  capability sets for the file.
-	 *
-	 *  If only the real uid is 0, we only raise the inheritable
-	 *  and permitted sets of the executable file.
-	 */
 
-	if (!issecure (SECURE_NOROOT)) {
+	if (!issecure(SECURE_NOROOT)) {
+		/*
+		 * To support inheritance of root-permissions and suid-root
+		 * executables under compatibility mode, we override the
+		 * capability sets for the file.
+		 *
+		 * If only the real uid is 0, we do not set the effective
+		 * bit.
+		 */
 		if (bprm->e_uid == 0 || current->uid == 0) {
-			cap_set_full (bprm->cap_inheritable);
-			cap_set_full (bprm->cap_permitted);
+			/* pP' = (cap_bset & ~0) | (pI & ~0) */
+			bprm->cap_post_exec_permitted = cap_combine(
+				current->cap_bset, current->cap_inheritable
+				);
+			bprm->cap_effective = (bprm->e_uid == 0);
+			ret = 0;
 		}
-		if (bprm->e_uid == 0)
-			bprm->cap_effective = true;
 	}
 
 	return ret;
@@ -330,17 +350,9 @@ int cap_bprm_set_security (struct linux_binprm *bprm)
 
 void cap_bprm_apply_creds (struct linux_binprm *bprm, int unsafe)
 {
-	/* Derived from fs/exec.c:compute_creds. */
-	kernel_cap_t new_permitted, working;
-
-	new_permitted = cap_intersect(bprm->cap_permitted,
-				 current->cap_bset);
-	working = cap_intersect(bprm->cap_inheritable,
-				 current->cap_inheritable);
-	new_permitted = cap_combine(new_permitted, working);
-
 	if (bprm->e_uid != current->uid || bprm->e_gid != current->gid ||
-	    !cap_issubset (new_permitted, current->cap_permitted)) {
+	    !cap_issubset(bprm->cap_post_exec_permitted,
+			  current->cap_permitted)) {
 		set_dumpable(current->mm, suid_dumpable);
 		current->pdeath_signal = 0;
 
@@ -350,9 +362,9 @@ void cap_bprm_apply_creds (struct linux_binprm *bprm, int unsafe)
 				bprm->e_gid = current->gid;
 			}
 			if (cap_limit_ptraced_target()) {
-				new_permitted =
-					cap_intersect(new_permitted,
-						      current->cap_permitted);
+				bprm->cap_post_exec_permitted = cap_intersect(
+					bprm->cap_post_exec_permitted,
+					current->cap_permitted);
 			}
 		}
 	}
@@ -364,9 +376,9 @@ void cap_bprm_apply_creds (struct linux_binprm *bprm, int unsafe)
 	 * in the init_task struct. Thus we skip the usual
 	 * capability rules */
 	if (!is_global_init(current)) {
-		current->cap_permitted = new_permitted;
+		current->cap_permitted = bprm->cap_post_exec_permitted;
 		if (bprm->cap_effective)
-			current->cap_effective = new_permitted;
+			current->cap_effective = bprm->cap_post_exec_permitted;
 		else
 			cap_clear(current->cap_effective);
 	}
@@ -381,9 +393,7 @@ int cap_bprm_secureexec (struct linux_binprm *bprm)
 	if (current->uid != 0) {
 		if (bprm->cap_effective)
 			return 1;
-		if (!cap_isclear(bprm->cap_permitted))
-			return 1;
-		if (!cap_isclear(bprm->cap_inheritable))
+		if (!cap_isclear(bprm->cap_post_exec_permitted))
 			return 1;
 	}
 
-- 
cgit v1.2.3


From ab763c7112ce0e2559c73f921617c81dc7287ca6 Mon Sep 17 00:00:00 2001
From: "Andrew G. Morgan" <morgan@kernel.org>
Date: Wed, 23 Jul 2008 21:28:25 -0700
Subject: security: filesystem capabilities refactor kernel code

To date, we've tried hard to confine filesystem support for capabilities
to the security modules.  This has left a lot of the code in
kernel/capability.c in a state where it looks like it supports something
that filesystem support for capabilities actually suppresses when the LSM
security/commmoncap.c code runs.  What is left is a lot of code that uses
sub-optimal locking in the main kernel

With this change we refactor the main kernel code and make it explicit
which locks are needed and that the only remaining kernel races in this
area are associated with non-filesystem capability code.

Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/capability.c | 338 ++++++++++++++++++++++++++++++++++------------------
 1 file changed, 221 insertions(+), 117 deletions(-)

diff --git a/kernel/capability.c b/kernel/capability.c
index 901e0fdc3ff..0101e847603 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -115,11 +115,208 @@ static int cap_validate_magic(cap_user_header_t header, unsigned *tocopy)
 	return 0;
 }
 
+#ifndef CONFIG_SECURITY_FILE_CAPABILITIES
+
+/*
+ * Without filesystem capability support, we nominally support one process
+ * setting the capabilities of another
+ */
+static inline int cap_get_target_pid(pid_t pid, kernel_cap_t *pEp,
+				     kernel_cap_t *pIp, kernel_cap_t *pPp)
+{
+	struct task_struct *target;
+	int ret;
+
+	spin_lock(&task_capability_lock);
+	read_lock(&tasklist_lock);
+
+	if (pid && pid != task_pid_vnr(current)) {
+		target = find_task_by_vpid(pid);
+		if (!target) {
+			ret = -ESRCH;
+			goto out;
+		}
+	} else
+		target = current;
+
+	ret = security_capget(target, pEp, pIp, pPp);
+
+out:
+	read_unlock(&tasklist_lock);
+	spin_unlock(&task_capability_lock);
+
+	return ret;
+}
+
+/*
+ * cap_set_pg - set capabilities for all processes in a given process
+ * group.  We call this holding task_capability_lock and tasklist_lock.
+ */
+static inline int cap_set_pg(int pgrp_nr, kernel_cap_t *effective,
+			     kernel_cap_t *inheritable,
+			     kernel_cap_t *permitted)
+{
+	struct task_struct *g, *target;
+	int ret = -EPERM;
+	int found = 0;
+	struct pid *pgrp;
+
+	spin_lock(&task_capability_lock);
+	read_lock(&tasklist_lock);
+
+	pgrp = find_vpid(pgrp_nr);
+	do_each_pid_task(pgrp, PIDTYPE_PGID, g) {
+		target = g;
+		while_each_thread(g, target) {
+			if (!security_capset_check(target, effective,
+						   inheritable, permitted)) {
+				security_capset_set(target, effective,
+						    inheritable, permitted);
+				ret = 0;
+			}
+			found = 1;
+		}
+	} while_each_pid_task(pgrp, PIDTYPE_PGID, g);
+
+	read_unlock(&tasklist_lock);
+	spin_unlock(&task_capability_lock);
+
+	if (!found)
+		ret = 0;
+	return ret;
+}
+
 /*
- * For sys_getproccap() and sys_setproccap(), any of the three
- * capability set pointers may be NULL -- indicating that that set is
- * uninteresting and/or not to be changed.
+ * cap_set_all - set capabilities for all processes other than init
+ * and self.  We call this holding task_capability_lock and tasklist_lock.
  */
+static inline int cap_set_all(kernel_cap_t *effective,
+			      kernel_cap_t *inheritable,
+			      kernel_cap_t *permitted)
+{
+	struct task_struct *g, *target;
+	int ret = -EPERM;
+	int found = 0;
+
+	spin_lock(&task_capability_lock);
+	read_lock(&tasklist_lock);
+
+	do_each_thread(g, target) {
+		if (target == current
+		    || is_container_init(target->group_leader))
+			continue;
+		found = 1;
+		if (security_capset_check(target, effective, inheritable,
+					  permitted))
+			continue;
+		ret = 0;
+		security_capset_set(target, effective, inheritable, permitted);
+	} while_each_thread(g, target);
+
+	read_unlock(&tasklist_lock);
+	spin_unlock(&task_capability_lock);
+
+	if (!found)
+		ret = 0;
+
+	return ret;
+}
+
+/*
+ * Given the target pid does not refer to the current process we
+ * need more elaborate support... (This support is not present when
+ * filesystem capabilities are configured.)
+ */
+static inline int do_sys_capset_other_tasks(pid_t pid, kernel_cap_t *effective,
+					    kernel_cap_t *inheritable,
+					    kernel_cap_t *permitted)
+{
+	struct task_struct *target;
+	int ret;
+
+	if (!capable(CAP_SETPCAP))
+		return -EPERM;
+
+	if (pid == -1)	          /* all procs other than current and init */
+		return cap_set_all(effective, inheritable, permitted);
+
+	else if (pid < 0)                    /* all procs in process group */
+		return cap_set_pg(-pid, effective, inheritable, permitted);
+
+	/* target != current */
+	spin_lock(&task_capability_lock);
+	read_lock(&tasklist_lock);
+
+	target = find_task_by_vpid(pid);
+	if (!target)
+		ret = -ESRCH;
+	else {
+		ret = security_capset_check(target, effective, inheritable,
+					    permitted);
+
+		/* having verified that the proposed changes are legal,
+		   we now put them into effect. */
+		if (!ret)
+			security_capset_set(target, effective, inheritable,
+					    permitted);
+	}
+
+	read_unlock(&tasklist_lock);
+	spin_unlock(&task_capability_lock);
+
+	return ret;
+}
+
+#else /* ie., def CONFIG_SECURITY_FILE_CAPABILITIES */
+
+/*
+ * If we have configured with filesystem capability support, then the
+ * only thing that can change the capabilities of the current process
+ * is the current process. As such, we can't be in this code at the
+ * same time as we are in the process of setting capabilities in this
+ * process. The net result is that we can limit our use of locks to
+ * when we are reading the caps of another process.
+ */
+static inline int cap_get_target_pid(pid_t pid, kernel_cap_t *pEp,
+				     kernel_cap_t *pIp, kernel_cap_t *pPp)
+{
+	int ret;
+
+	if (pid && (pid != task_pid_vnr(current))) {
+		struct task_struct *target;
+
+		spin_lock(&task_capability_lock);
+		read_lock(&tasklist_lock);
+
+		target = find_task_by_vpid(pid);
+		if (!target)
+			ret = -ESRCH;
+		else
+			ret = security_capget(target, pEp, pIp, pPp);
+
+		read_unlock(&tasklist_lock);
+		spin_unlock(&task_capability_lock);
+	} else
+		ret = security_capget(current, pEp, pIp, pPp);
+
+	return ret;
+}
+
+/*
+ * With filesystem capability support configured, the kernel does not
+ * permit the changing of capabilities in one process by another
+ * process. (CAP_SETPCAP has much less broad semantics when configured
+ * this way.)
+ */
+static inline int do_sys_capset_other_tasks(pid_t pid,
+					    kernel_cap_t *effective,
+					    kernel_cap_t *inheritable,
+					    kernel_cap_t *permitted)
+{
+	return -EPERM;
+}
+
+#endif /* ie., ndef CONFIG_SECURITY_FILE_CAPABILITIES */
 
 /*
  * Atomically modify the effective capabilities returning the original
@@ -155,7 +352,6 @@ asmlinkage long sys_capget(cap_user_header_t header, cap_user_data_t dataptr)
 {
 	int ret = 0;
 	pid_t pid;
-	struct task_struct *target;
 	unsigned tocopy;
 	kernel_cap_t pE, pI, pP;
 
@@ -169,23 +365,7 @@ asmlinkage long sys_capget(cap_user_header_t header, cap_user_data_t dataptr)
 	if (pid < 0)
 		return -EINVAL;
 
-	spin_lock(&task_capability_lock);
-	read_lock(&tasklist_lock);
-
-	if (pid && pid != task_pid_vnr(current)) {
-		target = find_task_by_vpid(pid);
-		if (!target) {
-			ret = -ESRCH;
-			goto out;
-		}
-	} else
-		target = current;
-
-	ret = security_capget(target, &pE, &pI, &pP);
-
-out:
-	read_unlock(&tasklist_lock);
-	spin_unlock(&task_capability_lock);
+	ret = cap_get_target_pid(pid, &pE, &pI, &pP);
 
 	if (!ret) {
 		struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
@@ -216,7 +396,6 @@ out:
 		 * before modification is attempted and the application
 		 * fails.
 		 */
-
 		if (copy_to_user(dataptr, kdata, tocopy
 				 * sizeof(struct __user_cap_data_struct))) {
 			return -EFAULT;
@@ -226,70 +405,8 @@ out:
 	return ret;
 }
 
-/*
- * cap_set_pg - set capabilities for all processes in a given process
- * group.  We call this holding task_capability_lock and tasklist_lock.
- */
-static inline int cap_set_pg(int pgrp_nr, kernel_cap_t *effective,
-			      kernel_cap_t *inheritable,
-			      kernel_cap_t *permitted)
-{
-	struct task_struct *g, *target;
-	int ret = -EPERM;
-	int found = 0;
-	struct pid *pgrp;
-
-	pgrp = find_vpid(pgrp_nr);
-	do_each_pid_task(pgrp, PIDTYPE_PGID, g) {
-		target = g;
-		while_each_thread(g, target) {
-			if (!security_capset_check(target, effective,
-							inheritable,
-							permitted)) {
-				security_capset_set(target, effective,
-							inheritable,
-							permitted);
-				ret = 0;
-			}
-			found = 1;
-		}
-	} while_each_pid_task(pgrp, PIDTYPE_PGID, g);
-
-	if (!found)
-		ret = 0;
-	return ret;
-}
-
-/*
- * cap_set_all - set capabilities for all processes other than init
- * and self.  We call this holding task_capability_lock and tasklist_lock.
- */
-static inline int cap_set_all(kernel_cap_t *effective,
-			       kernel_cap_t *inheritable,
-			       kernel_cap_t *permitted)
-{
-     struct task_struct *g, *target;
-     int ret = -EPERM;
-     int found = 0;
-
-     do_each_thread(g, target) {
-             if (target == current || is_container_init(target->group_leader))
-                     continue;
-             found = 1;
-	     if (security_capset_check(target, effective, inheritable,
-						permitted))
-		     continue;
-	     ret = 0;
-	     security_capset_set(target, effective, inheritable, permitted);
-     } while_each_thread(g, target);
-
-     if (!found)
-	     ret = 0;
-     return ret;
-}
-
 /**
- * sys_capset - set capabilities for a process or a group of processes
+ * sys_capset - set capabilities for a process or (*) a group of processes
  * @header: pointer to struct that contains capability version and
  *	target pid data
  * @data: pointer to struct that contains the effective, permitted,
@@ -313,7 +430,6 @@ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
 	struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
 	unsigned i, tocopy;
 	kernel_cap_t inheritable, permitted, effective;
-	struct task_struct *target;
 	int ret;
 	pid_t pid;
 
@@ -324,9 +440,6 @@ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
 	if (get_user(pid, &header->pid))
 		return -EFAULT;
 
-	if (pid && pid != task_pid_vnr(current) && !capable(CAP_SETPCAP))
-		return -EPERM;
-
 	if (copy_from_user(&kdata, data, tocopy
 			   * sizeof(struct __user_cap_data_struct))) {
 		return -EFAULT;
@@ -344,40 +457,31 @@ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
 		i++;
 	}
 
-	spin_lock(&task_capability_lock);
-	read_lock(&tasklist_lock);
-
-	if (pid > 0 && pid != task_pid_vnr(current)) {
-		target = find_task_by_vpid(pid);
-		if (!target) {
-			ret = -ESRCH;
-			goto out;
-		}
-	} else
-		target = current;
-
-	ret = 0;
-
-	/* having verified that the proposed changes are legal,
-	   we now put them into effect. */
-	if (pid < 0) {
-		if (pid == -1)	/* all procs other than current and init */
-			ret = cap_set_all(&effective, &inheritable, &permitted);
+	if (pid && (pid != task_pid_vnr(current)))
+		ret = do_sys_capset_other_tasks(pid, &effective, &inheritable,
+						&permitted);
+	else {
+		/*
+		 * This lock is required even when filesystem
+		 * capability support is configured - it protects the
+		 * sys_capget() call from returning incorrect data in
+		 * the case that the targeted process is not the
+		 * current one.
+		 */
+		spin_lock(&task_capability_lock);
 
-		else		/* all procs in process group */
-			ret = cap_set_pg(-pid, &effective, &inheritable,
-					 &permitted);
-	} else {
-		ret = security_capset_check(target, &effective, &inheritable,
+		ret = security_capset_check(current, &effective, &inheritable,
 					    &permitted);
+		/*
+		 * Having verified that the proposed changes are
+		 * legal, we now put them into effect.
+		 */
 		if (!ret)
-			security_capset_set(target, &effective, &inheritable,
+			security_capset_set(current, &effective, &inheritable,
 					    &permitted);
+		spin_unlock(&task_capability_lock);
 	}
 
-out:
-	read_unlock(&tasklist_lock);
-	spin_unlock(&task_capability_lock);
 
 	return ret;
 }
-- 
cgit v1.2.3


From 84aaa7ab4c40b66d6dd9aa393901551ad50ec640 Mon Sep 17 00:00:00 2001
From: "Andrew G. Morgan" <morgan@kernel.org>
Date: Wed, 23 Jul 2008 21:28:25 -0700
Subject: security: filesystem capabilities no longer experimental

Filesystem capabilities have come of age.  Remove the experimental tag for
configuring filesystem capabilities.

Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 security/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/security/Kconfig b/security/Kconfig
index 62ed4717d33..559293922a4 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -74,8 +74,7 @@ config SECURITY_NETWORK_XFRM
 	  If you are unsure how to answer this question, answer N.
 
 config SECURITY_FILE_CAPABILITIES
-	bool "File POSIX Capabilities (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "File POSIX Capabilities"
 	default n
 	help
 	  This enables filesystem capabilities, allowing you to give
-- 
cgit v1.2.3


From 9b3e43a747c74029b0acf6acf4666601f132f471 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Wed, 23 Jul 2008 21:28:26 -0700
Subject: security: remove unused forwards

Why would linux/security.h need forward declarations for nfsctl_arg and
swap_info_struct?  It's hard to imagine: remove them.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/security.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/security.h b/include/linux/security.h
index 31c8851ec5d..f0e9adb22ac 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -102,9 +102,7 @@ extern unsigned long mmap_min_addr;
 #define LSM_SETID_FS	8
 
 /* forward declares to avoid warnings */
-struct nfsctl_arg;
 struct sched_param;
-struct swap_info_struct;
 struct request_sock;
 
 /* bprm_apply_creds unsafe reasons */
-- 
cgit v1.2.3


From 5002779d37b261271da9883e06c14b097d4781c4 Mon Sep 17 00:00:00 2001
From: Tilman Schmidt <tilman@imap.cc>
Date: Wed, 23 Jul 2008 21:28:27 -0700
Subject: gigaset: use dev_ macros for messages

The info() / warn() / err() macros from usb.h for generating kernel
messages are considered inferior to dev_info() / dev_warn() / dev_err()
from device.h.  Replace them where possible.  Also correct the severity
level and improve the text of one message.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/isdn/gigaset/asyncdata.c   |  3 +-
 drivers/isdn/gigaset/common.c      |  2 +-
 drivers/isdn/gigaset/gigaset.h     |  3 --
 drivers/isdn/gigaset/i4l.c         | 56 ++++++++++++++++++++++----------------
 drivers/isdn/gigaset/interface.c   | 25 +++++++++--------
 drivers/isdn/gigaset/usb-gigaset.c |  7 +++--
 6 files changed, 53 insertions(+), 43 deletions(-)

diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index 091deb9d1c4..c2bd97d2927 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -575,7 +575,8 @@ int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb)
 	else
 		skb = iraw_encode(skb, HW_HDR_LEN, 0);
 	if (!skb) {
-		err("unable to allocate memory for encoding!\n");
+		dev_err(bcs->cs->dev,
+			"unable to allocate memory for encoding!\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 827c32c1679..9d3ce7718e5 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -287,7 +287,7 @@ struct event_t *gigaset_add_event(struct cardstate *cs,
 	tail = cs->ev_tail;
 	next = (tail + 1) % MAX_EVENTS;
 	if (unlikely(next == cs->ev_head))
-		err("event queue full");
+		dev_err(cs->dev, "event queue full\n");
 	else {
 		event = cs->events + tail;
 		event->type = type;
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index f365993161f..00375295499 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -106,7 +106,6 @@ enum debuglevel {
 #undef err
 #undef info
 #undef warn
-#undef notice
 
 #define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
 	format "\n" , ## arg)
@@ -114,8 +113,6 @@ enum debuglevel {
 	format "\n" , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING KBUILD_MODNAME ": " \
 	format "\n" , ## arg)
-#define notice(format, arg...) printk(KERN_NOTICE KBUILD_MODNAME ": " \
-	format "\n" , ## arg)
 
 #ifdef CONFIG_GIGASET_DEBUG
 
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index 9e089f06a94..3c127a8cbaf 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -46,7 +46,8 @@ static int writebuf_from_LL(int driverID, int channel, int ack,
 		return -ENODEV;
 	}
 	if (channel < 0 || channel >= cs->channels) {
-		err("%s: invalid channel ID (%d)", __func__, channel);
+		dev_err(cs->dev, "%s: invalid channel ID (%d)\n",
+			__func__, channel);
 		return -ENODEV;
 	}
 	bcs = &cs->bcs[channel];
@@ -58,11 +59,13 @@ static int writebuf_from_LL(int driverID, int channel, int ack,
 
 	if (!len) {
 		if (ack)
-			notice("%s: not ACKing empty packet", __func__);
+			dev_notice(cs->dev, "%s: not ACKing empty packet\n",
+				   __func__);
 		return 0;
 	}
 	if (len > MAX_BUF_SIZE) {
-		err("%s: packet too large (%d bytes)", __func__, len);
+		dev_err(cs->dev, "%s: packet too large (%d bytes)\n",
+			__func__, len);
 		return -EINVAL;
 	}
 
@@ -116,8 +119,7 @@ static int command_from_LL(isdn_ctrl *cntrl)
 	gigaset_debugdrivers();
 
 	if (!cs) {
-		warn("LL tried to access unknown device with nr. %d",
-		     cntrl->driver);
+		err("%s: invalid driver ID (%d)", __func__, cntrl->driver);
 		return -ENODEV;
 	}
 
@@ -126,7 +128,7 @@ static int command_from_LL(isdn_ctrl *cntrl)
 		gig_dbg(DEBUG_ANY, "ISDN_CMD_IOCTL (driver: %d, arg: %ld)",
 			cntrl->driver, cntrl->arg);
 
-		warn("ISDN_CMD_IOCTL is not supported.");
+		dev_warn(cs->dev, "ISDN_CMD_IOCTL not supported\n");
 		return -EINVAL;
 
 	case ISDN_CMD_DIAL:
@@ -138,22 +140,23 @@ static int command_from_LL(isdn_ctrl *cntrl)
 			cntrl->parm.setup.si1, cntrl->parm.setup.si2);
 
 		if (cntrl->arg >= cs->channels) {
-			err("ISDN_CMD_DIAL: invalid channel (%d)",
-			    (int) cntrl->arg);
+			dev_err(cs->dev,
+				"ISDN_CMD_DIAL: invalid channel (%d)\n",
+				(int) cntrl->arg);
 			return -EINVAL;
 		}
 
 		bcs = cs->bcs + cntrl->arg;
 
 		if (!gigaset_get_channel(bcs)) {
-			err("ISDN_CMD_DIAL: channel not free");
+			dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n");
 			return -EBUSY;
 		}
 
 		sp = kmalloc(sizeof *sp, GFP_ATOMIC);
 		if (!sp) {
 			gigaset_free_channel(bcs);
-			err("ISDN_CMD_DIAL: out of memory");
+			dev_err(cs->dev, "ISDN_CMD_DIAL: out of memory\n");
 			return -ENOMEM;
 		}
 		*sp = cntrl->parm.setup;
@@ -173,8 +176,9 @@ static int command_from_LL(isdn_ctrl *cntrl)
 		gig_dbg(DEBUG_ANY, "ISDN_CMD_ACCEPTD");
 
 		if (cntrl->arg >= cs->channels) {
-			err("ISDN_CMD_ACCEPTD: invalid channel (%d)",
-			    (int) cntrl->arg);
+			dev_err(cs->dev,
+				"ISDN_CMD_ACCEPTD: invalid channel (%d)\n",
+				(int) cntrl->arg);
 			return -EINVAL;
 		}
 
@@ -196,8 +200,9 @@ static int command_from_LL(isdn_ctrl *cntrl)
 			(int) cntrl->arg);
 
 		if (cntrl->arg >= cs->channels) {
-			err("ISDN_CMD_HANGUP: invalid channel (%u)",
-			    (unsigned) cntrl->arg);
+			dev_err(cs->dev,
+				"ISDN_CMD_HANGUP: invalid channel (%d)\n",
+				(int) cntrl->arg);
 			return -EINVAL;
 		}
 
@@ -224,8 +229,9 @@ static int command_from_LL(isdn_ctrl *cntrl)
 			cntrl->arg & 0xff, (cntrl->arg >> 8));
 
 		if ((cntrl->arg & 0xff) >= cs->channels) {
-			err("ISDN_CMD_SETL2: invalid channel (%u)",
-			    (unsigned) cntrl->arg & 0xff);
+			dev_err(cs->dev,
+				"ISDN_CMD_SETL2: invalid channel (%d)\n",
+				(int) cntrl->arg & 0xff);
 			return -EINVAL;
 		}
 
@@ -244,14 +250,16 @@ static int command_from_LL(isdn_ctrl *cntrl)
 			cntrl->arg & 0xff, (cntrl->arg >> 8));
 
 		if ((cntrl->arg & 0xff) >= cs->channels) {
-			err("ISDN_CMD_SETL3: invalid channel (%u)",
-			    (unsigned) cntrl->arg & 0xff);
+			dev_err(cs->dev,
+				"ISDN_CMD_SETL3: invalid channel (%d)\n",
+				(int) cntrl->arg & 0xff);
 			return -EINVAL;
 		}
 
 		if (cntrl->arg >> 8 != ISDN_PROTO_L3_TRANS) {
-			err("ISDN_CMD_SETL3: invalid protocol %lu",
-			    cntrl->arg >> 8);
+			dev_err(cs->dev,
+				"ISDN_CMD_SETL3: invalid protocol %lu\n",
+				cntrl->arg >> 8);
 			return -EINVAL;
 		}
 
@@ -262,8 +270,9 @@ static int command_from_LL(isdn_ctrl *cntrl)
 	case ISDN_CMD_ALERT:
 		gig_dbg(DEBUG_ANY, "ISDN_CMD_ALERT"); //FIXME
 		if (cntrl->arg >= cs->channels) {
-			err("ISDN_CMD_ALERT: invalid channel (%d)",
-			    (int) cntrl->arg);
+			dev_err(cs->dev,
+				"ISDN_CMD_ALERT: invalid channel (%d)\n",
+				(int) cntrl->arg);
 			return -EINVAL;
 		}
 		//bcs = cs->bcs + cntrl->arg;
@@ -295,7 +304,8 @@ static int command_from_LL(isdn_ctrl *cntrl)
 		gig_dbg(DEBUG_ANY, "ISDN_CMD_GETSIL");
 		break;
 	default:
-		err("unknown command %d from LL", cntrl->command);
+		dev_err(cs->dev, "unknown command %d from LL\n",
+			cntrl->command);
 		return -EINVAL;
 	}
 
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index af195b07c19..521951a898e 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -197,7 +197,7 @@ static void if_close(struct tty_struct *tty, struct file *filp)
 	mutex_lock(&cs->mutex);
 
 	if (!cs->open_count)
-		warn("%s: device not opened", __func__);
+		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else {
 		if (!--cs->open_count) {
 			spin_lock_irqsave(&cs->lock, flags);
@@ -232,7 +232,7 @@ static int if_ioctl(struct tty_struct *tty, struct file *file,
 		return -ERESTARTSYS; // FIXME -EINTR?
 
 	if (!cs->open_count)
-		warn("%s: device not opened", __func__);
+		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else {
 		retval = 0;
 		switch (cmd) {
@@ -364,9 +364,9 @@ static int if_write(struct tty_struct *tty, const unsigned char *buf, int count)
 		return -ERESTARTSYS; // FIXME -EINTR?
 
 	if (!cs->open_count)
-		warn("%s: device not opened", __func__);
+		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else if (cs->mstate != MS_LOCKED) {
-		warn("can't write to unlocked device");
+		dev_warn(cs->dev, "can't write to unlocked device\n");
 		retval = -EBUSY;
 	} else if (!cs->connected) {
 		gig_dbg(DEBUG_ANY, "can't write to unplugged device");
@@ -398,9 +398,9 @@ static int if_write_room(struct tty_struct *tty)
 		return -ERESTARTSYS; // FIXME -EINTR?
 
 	if (!cs->open_count)
-		warn("%s: device not opened", __func__);
+		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else if (cs->mstate != MS_LOCKED) {
-		warn("can't write to unlocked device");
+		dev_warn(cs->dev, "can't write to unlocked device\n");
 		retval = -EBUSY;
 	} else if (!cs->connected) {
 		gig_dbg(DEBUG_ANY, "can't write to unplugged device");
@@ -430,9 +430,9 @@ static int if_chars_in_buffer(struct tty_struct *tty)
 		return -ERESTARTSYS; // FIXME -EINTR?
 
 	if (!cs->open_count)
-		warn("%s: device not opened", __func__);
+		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else if (cs->mstate != MS_LOCKED) {
-		warn("can't write to unlocked device");
+		dev_warn(cs->dev, "can't write to unlocked device\n");
 		retval = -EBUSY;
 	} else if (!cs->connected) {
 		gig_dbg(DEBUG_ANY, "can't write to unplugged device");
@@ -460,7 +460,7 @@ static void if_throttle(struct tty_struct *tty)
 	mutex_lock(&cs->mutex);
 
 	if (!cs->open_count)
-		warn("%s: device not opened", __func__);
+		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else {
 		//FIXME
 	}
@@ -483,7 +483,7 @@ static void if_unthrottle(struct tty_struct *tty)
 	mutex_lock(&cs->mutex);
 
 	if (!cs->open_count)
-		warn("%s: device not opened", __func__);
+		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 	else {
 		//FIXME
 	}
@@ -510,7 +510,7 @@ static void if_set_termios(struct tty_struct *tty, struct ktermios *old)
 	mutex_lock(&cs->mutex);
 
 	if (!cs->open_count) {
-		warn("%s: device not opened", __func__);
+		dev_warn(cs->dev, "%s: device not opened\n", __func__);
 		goto out;
 	}
 
@@ -623,7 +623,8 @@ void gigaset_if_init(struct cardstate *cs)
 	if (!IS_ERR(cs->tty_dev))
 		dev_set_drvdata(cs->tty_dev, cs);
 	else {
-		warn("could not register device to the tty subsystem");
+		dev_warn(cs->dev,
+			 "could not register device to the tty subsystem\n");
 		cs->tty_dev = NULL;
 	}
 	mutex_unlock(&cs->mutex);
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index 77d20ab0cd4..4661830a49d 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -498,8 +498,9 @@ static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb)
 
 			if (status) {
 				ucs->busy = 0;
-				err("could not submit urb (error %d)\n",
-				    -status);
+				dev_err(cs->dev,
+					"could not submit urb (error %d)\n",
+					-status);
 				cb->len = 0; /* skip urb => remove cb+wakeup
 						in next loop cycle */
 			}
@@ -670,7 +671,7 @@ static int write_modem(struct cardstate *cs)
 	spin_unlock_irqrestore(&cs->lock, flags);
 
 	if (ret) {
-		err("could not submit urb (error %d)\n", -ret);
+		dev_err(cs->dev, "could not submit urb (error %d)\n", -ret);
 		ucs->busy = 0;
 	}
 
-- 
cgit v1.2.3


From 5f09c4c797d00bef5700e1ca085b4efcedaf34b8 Mon Sep 17 00:00:00 2001
From: Tilman Schmidt <tilman@imap.cc>
Date: Wed, 23 Jul 2008 21:28:27 -0700
Subject: gigaset: gigaset_isowbuf_getbytes() may return signed unnoticed

ifd->offset is unsigned.  gigaset_isowbuf_getbytes() may return signed
unnoticed.  Revised version of patch originally submitted by Roel Kluin
<12o3l@tiscali.nl>.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/isdn/gigaset/bas-gigaset.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 5255b5e20e1..3f11910c7cc 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -1050,10 +1050,9 @@ static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
 		}
 
 		/* retrieve block of data to send */
-		ifd->offset = gigaset_isowbuf_getbytes(ubc->isooutbuf,
-						       ifd->length);
-		if (ifd->offset < 0) {
-			if (ifd->offset == -EBUSY) {
+		rc = gigaset_isowbuf_getbytes(ubc->isooutbuf, ifd->length);
+		if (rc < 0) {
+			if (rc == -EBUSY) {
 				gig_dbg(DEBUG_ISO,
 					"%s: buffer busy at frame %d",
 					__func__, nframe);
@@ -1062,11 +1061,12 @@ static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
 			} else {
 				dev_err(ucx->bcs->cs->dev,
 					"%s: buffer error %d at frame %d\n",
-					__func__, ifd->offset, nframe);
-				return ifd->offset;
+					__func__, rc, nframe);
+				return rc;
 			}
 			break;
 		}
+		ifd->offset = rc;
 		ucx->limit = ubc->isooutbuf->nextread;
 		ifd->status = 0;
 		ifd->actual_length = 0;
-- 
cgit v1.2.3


From e53f12cc6c43b69f54937f15c5706d83f67c2fdd Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:28:28 -0700
Subject: remove include/asm-h8300/keyboard.h

This patch removes the unused include/asm-h8300/keyboard.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-h8300/keyboard.h | 24 ------------------------
 1 file changed, 24 deletions(-)
 delete mode 100644 include/asm-h8300/keyboard.h

diff --git a/include/asm-h8300/keyboard.h b/include/asm-h8300/keyboard.h
deleted file mode 100644
index 90efbd65539..00000000000
--- a/include/asm-h8300/keyboard.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-h8300/keyboard.h
- *  Created 04 Dec 2001 by Khaled Hassounah <khassounah@mediumware.net>
- *  This file contains the Dragonball architecture specific keyboard definitions
- */
-
-#ifndef _H8300_KEYBOARD_H
-#define _H8300_KEYBOARD_H
-
-
-/* dummy i.e. no real keyboard */
-#define kbd_setkeycode(x...)	(-ENOSYS)
-#define kbd_getkeycode(x...)	(-ENOSYS)
-#define kbd_translate(x...)	(0)
-#define kbd_unexpected_up(x...)	(1)
-#define kbd_leds(x...)		do {;} while (0)
-#define kbd_init_hw(x...)	do {;} while (0)
-#define kbd_enable_irq(x...)	do {;} while (0)
-#define kbd_disable_irq(x...)	do {;} while (0)
-
-#endif  /* _H8300_KEYBOARD_H */
-
-
-
-- 
cgit v1.2.3


From fb9ba4e95921f71d874beee2d0964fc2322b47a2 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:28:29 -0700
Subject: alpha: remove the unused ALPHA_CORE_AGP option

The real option is named AGP_ALPHA_CORE.

Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/Kconfig | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index dbe8c280fea..1bec55d63ef 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -333,11 +333,6 @@ config PCI_SYSCALL
 config IOMMU_HELPER
 	def_bool PCI
 
-config ALPHA_CORE_AGP
-	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
-	default y
-
 config ALPHA_NONAME
 	bool
 	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
-- 
cgit v1.2.3


From 0d63081d418c73cc187c893069e0f24c4c6eecd3 Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@suse.cz>
Date: Wed, 23 Jul 2008 21:28:32 -0700
Subject: swsusp: provide users with a hint about the no_console_suspend option

Tell the user about the no_console_suspend option, so that we don't have to
tell each bug reporter personally.

[akpm@linux-foundation.org: clarify the text a little]
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/printk.c b/kernel/printk.c
index 07ad9e7f7a6..3f7a2a94583 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -933,7 +933,7 @@ void suspend_console(void)
 {
 	if (!console_suspend_enabled)
 		return;
-	printk("Suspending console(s)\n");
+	printk("Suspending console(s) (use no_console_suspend to debug)\n");
 	acquire_console_sem();
 	console_suspended = 1;
 }
-- 
cgit v1.2.3


From 77437fd4e61f87cc94d9314baa5cbf50e3ccdf54 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Wed, 23 Jul 2008 21:28:33 -0700
Subject: pm: boot time suspend selftest

Boot-time test for system suspend states (STR or standby).  The generic
RTC framework triggers wakeup alarms, which are used to exit those states.

  - Measures some aspects of suspend time ... this uses "jiffies" until
    someone converts it to use a timebase that works properly even while
    timer IRQs are disabled.

  - Triggered by a command line parameter.  By default nothing even
    vaguely troublesome will happen, but "test_suspend=mem" will give
    you a brief STR test during system boot.  (Or you may need to use
    "test_suspend=standby" instead, if your hardware needs that.)

This isn't without problems.  It fires early enough during boot that for
example both PCMCIA and MMC stacks have misbehaved.  The workaround in
those cases was to boot without such media cards inserted.

[matthltc@us.ibm.com: fix compile failure in boot time suspend selftest]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Machek <pavel@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt |   9 +-
 kernel/power/Kconfig                |  11 ++
 kernel/power/main.c                 | 194 +++++++++++++++++++++++++++++++++++-
 3 files changed, 212 insertions(+), 2 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 01a2992b575..4d705713cab 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -87,7 +87,8 @@ parameter is applicable:
 	SH	SuperH architecture is enabled.
 	SMP	The kernel is an SMP kernel.
 	SPARC	Sparc architecture is enabled.
-	SWSUSP	Software suspend is enabled.
+	SWSUSP	Software suspend (hibernation) is enabled.
+	SUSPEND	System suspend states are enabled.
 	TS	Appropriate touchscreen support is enabled.
 	USB	USB support is enabled.
 	USBHID	USB Human Interface Device support is enabled.
@@ -2123,6 +2124,12 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	tdfx=		[HW,DRM]
 
+	test_suspend=	[SUSPEND]
+			Specify "mem" (for Suspend-to-RAM) or "standby" (for
+			standby suspend) as the system sleep state to briefly
+			enter during system startup.  The system is woken from
+			this state using a wakeup-capable RTC alarm.
+
 	thash_entries=	[KNL,NET]
 			Set number of hash buckets for TCP connection
 
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 59dfdf1e1d2..dcd165f92a8 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -94,6 +94,17 @@ config SUSPEND
 	  powered and thus its contents are preserved, such as the
 	  suspend-to-RAM state (e.g. the ACPI S3 state).
 
+config PM_TEST_SUSPEND
+	bool "Test suspend/resume and wakealarm during bootup"
+	depends on SUSPEND && PM_DEBUG && RTC_LIB=y
+	---help---
+	This option will let you suspend your machine during bootup, and
+	make it wake up a few seconds later using an RTC wakeup alarm.
+	Enable this with a kernel parameter like "test_suspend=mem".
+
+	You probably want to have your system's RTC driver statically
+	linked, ensuring that it's available when this test runs.
+
 config SUSPEND_FREEZER
 	bool "Enable freezer for suspend to RAM/standby" \
 		if ARCH_WANTS_FREEZER_CONTROL || BROKEN
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 3398f4651aa..95bff23ecda 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -132,6 +132,61 @@ static inline int suspend_test(int level) { return 0; }
 
 #ifdef CONFIG_SUSPEND
 
+#ifdef CONFIG_PM_TEST_SUSPEND
+
+/*
+ * We test the system suspend code by setting an RTC wakealarm a short
+ * time in the future, then suspending.  Suspending the devices won't
+ * normally take long ... some systems only need a few milliseconds.
+ *
+ * The time it takes is system-specific though, so when we test this
+ * during system bootup we allow a LOT of time.
+ */
+#define TEST_SUSPEND_SECONDS	5
+
+static unsigned long suspend_test_start_time;
+
+static void suspend_test_start(void)
+{
+	/* FIXME Use better timebase than "jiffies", ideally a clocksource.
+	 * What we want is a hardware counter that will work correctly even
+	 * during the irqs-are-off stages of the suspend/resume cycle...
+	 */
+	suspend_test_start_time = jiffies;
+}
+
+static void suspend_test_finish(const char *label)
+{
+	long nj = jiffies - suspend_test_start_time;
+	unsigned msec;
+
+	msec = jiffies_to_msecs(abs(nj));
+	pr_info("PM: %s took %d.%03d seconds\n", label,
+			msec / 1000, msec % 1000);
+
+	/* Warning on suspend means the RTC alarm period needs to be
+	 * larger -- the system was sooo slooowwww to suspend that the
+	 * alarm (should have) fired before the system went to sleep!
+	 *
+	 * Warning on either suspend or resume also means the system
+	 * has some performance issues.  The stack dump of a WARN_ON
+	 * is more likely to get the right attention than a printk...
+	 */
+	WARN_ON(msec > (TEST_SUSPEND_SECONDS * 1000));
+}
+
+#else
+
+static void suspend_test_start(void)
+{
+}
+
+static void suspend_test_finish(const char *label)
+{
+}
+
+#endif
+
 /* This is just an arbitrary number */
 #define FREE_PAGE_NUMBER (100)
 
@@ -266,12 +321,13 @@ int suspend_devices_and_enter(suspend_state_t state)
 			goto Close;
 	}
 	suspend_console();
+	suspend_test_start();
 	error = device_suspend(PMSG_SUSPEND);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to suspend\n");
 		goto Recover_platform;
 	}
-
+	suspend_test_finish("suspend devices");
 	if (suspend_test(TEST_DEVICES))
 		goto Recover_platform;
 
@@ -293,7 +349,9 @@ int suspend_devices_and_enter(suspend_state_t state)
 	if (suspend_ops->finish)
 		suspend_ops->finish();
  Resume_devices:
+	suspend_test_start();
 	device_resume(PMSG_RESUME);
+	suspend_test_finish("resume devices");
 	resume_console();
  Close:
 	if (suspend_ops->end)
@@ -521,3 +579,137 @@ static int __init pm_init(void)
 }
 
 core_initcall(pm_init);
+
+
+#ifdef CONFIG_PM_TEST_SUSPEND
+
+#include <linux/rtc.h>
+
+/*
+ * To test system suspend, we need a hands-off mechanism to resume the
+ * system.  RTCs wake alarms are a common self-contained mechanism.
+ */
+
+static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
+{
+	static char err_readtime[] __initdata =
+		KERN_ERR "PM: can't read %s time, err %d\n";
+	static char err_wakealarm [] __initdata =
+		KERN_ERR "PM: can't set %s wakealarm, err %d\n";
+	static char err_suspend[] __initdata =
+		KERN_ERR "PM: suspend test failed, error %d\n";
+	static char info_test[] __initdata =
+		KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
+
+	unsigned long		now;
+	struct rtc_wkalrm	alm;
+	int			status;
+
+	/* this may fail if the RTC hasn't been initialized */
+	status = rtc_read_time(rtc, &alm.time);
+	if (status < 0) {
+		printk(err_readtime, rtc->dev.bus_id, status);
+		return;
+	}
+	rtc_tm_to_time(&alm.time, &now);
+
+	memset(&alm, 0, sizeof alm);
+	rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
+	alm.enabled = true;
+
+	status = rtc_set_alarm(rtc, &alm);
+	if (status < 0) {
+		printk(err_wakealarm, rtc->dev.bus_id, status);
+		return;
+	}
+
+	if (state == PM_SUSPEND_MEM) {
+		printk(info_test, pm_states[state]);
+		status = pm_suspend(state);
+		if (status == -ENODEV)
+			state = PM_SUSPEND_STANDBY;
+	}
+	if (state == PM_SUSPEND_STANDBY) {
+		printk(info_test, pm_states[state]);
+		status = pm_suspend(state);
+	}
+	if (status < 0)
+		printk(err_suspend, status);
+}
+
+static int __init has_wakealarm(struct device *dev, void *name_ptr)
+{
+	struct rtc_device *candidate = to_rtc_device(dev);
+
+	if (!candidate->ops->set_alarm)
+		return 0;
+	if (!device_may_wakeup(candidate->dev.parent))
+		return 0;
+
+	*(char **)name_ptr = dev->bus_id;
+	return 1;
+}
+
+/*
+ * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
+ * at startup time.  They're normally disabled, for faster boot and because
+ * we can't know which states really work on this particular system.
+ */
+static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
+
+static char warn_bad_state[] __initdata =
+	KERN_WARNING "PM: can't test '%s' suspend state\n";
+
+static int __init setup_test_suspend(char *value)
+{
+	unsigned i;
+
+	/* "=mem" ==> "mem" */
+	value++;
+	for (i = 0; i < PM_SUSPEND_MAX; i++) {
+		if (!pm_states[i])
+			continue;
+		if (strcmp(pm_states[i], value) != 0)
+			continue;
+		test_state = (__force suspend_state_t) i;
+		return 0;
+	}
+	printk(warn_bad_state, value);
+	return 0;
+}
+__setup("test_suspend", setup_test_suspend);
+
+static int __init test_suspend(void)
+{
+	static char		warn_no_rtc[] __initdata =
+		KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
+
+	char			*pony = NULL;
+	struct rtc_device	*rtc = NULL;
+
+	/* PM is initialized by now; is that state testable? */
+	if (test_state == PM_SUSPEND_ON)
+		goto done;
+	if (!valid_state(test_state)) {
+		printk(warn_bad_state, pm_states[test_state]);
+		goto done;
+	}
+
+	/* RTCs have initialized by now too ... can we use one? */
+	class_find_device(rtc_class, NULL, &pony, has_wakealarm);
+	if (pony)
+		rtc = rtc_class_open(pony);
+	if (!rtc) {
+		printk(warn_no_rtc);
+		goto done;
+	}
+
+	/* go for it */
+	test_wakealarm(rtc, test_state);
+	rtc_class_close(rtc);
+done:
+	return 0;
+}
+late_initcall(test_suspend);
+
+#endif /* CONFIG_PM_TEST_SUSPEND */
-- 
cgit v1.2.3


From d75f65fd247fe85d90a3880d143b1bb22fe13a48 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:28:34 -0700
Subject: remove include/linux/pm_legacy.h

Remove the obsolete and no longer used include/linux/pm_legacy.h

Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Pavel Machek <pavel@suse.cz>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/pm.c            |  1 -
 arch/mips/au1000/common/power.c |  1 -
 arch/x86/kernel/apm_32.c        |  1 -
 include/linux/pm_legacy.h       | 35 -----------------------------------
 4 files changed, 38 deletions(-)
 delete mode 100644 include/linux/pm_legacy.h

diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index 73f3aeefd20..d1113c5031f 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/sysctl.h>
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index 2166b9e1e80..bd854a6d1d8 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -31,7 +31,6 @@
 
 #include <linux/init.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sysctl.h>
 #include <linux/jiffies.h>
 
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index bf9b441331e..9ee24e6bc4b 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -219,7 +219,6 @@
 #include <linux/time.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/capability.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
diff --git a/include/linux/pm_legacy.h b/include/linux/pm_legacy.h
deleted file mode 100644
index 446f4f42b95..00000000000
--- a/include/linux/pm_legacy.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef __LINUX_PM_LEGACY_H__
-#define __LINUX_PM_LEGACY_H__
-
-
-#ifdef CONFIG_PM_LEGACY
-
-/*
- * Register a device with power management
- */
-struct pm_dev __deprecated *
-pm_register(pm_dev_t type, unsigned long id, pm_callback callback);
-
-/*
- * Send a request to all devices
- */
-int __deprecated pm_send_all(pm_request_t rqst, void *data);
-
-#else /* CONFIG_PM_LEGACY */
-
-static inline struct pm_dev *pm_register(pm_dev_t type,
-					 unsigned long id,
-					 pm_callback callback)
-{
-	return NULL;
-}
-
-static inline int pm_send_all(pm_request_t rqst, void *data)
-{
-	return 0;
-}
-
-#endif /* CONFIG_PM_LEGACY */
-
-#endif /* __LINUX_PM_LEGACY_H__ */
-
-- 
cgit v1.2.3


From 558481f038e587b22d02167af58914c814ce9de5 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Wed, 23 Jul 2008 21:28:35 -0700
Subject: pm: remove definition of struct pm_dev

Remove the definition of 'struct pm_dev', which is not used any more,
along with some related stuff from include/linux/pm.h .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/pm.h | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/include/linux/pm.h b/include/linux/pm.h
index 4ad9de94449..5bf1ce89cfb 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -68,30 +68,6 @@ enum
  */
 #define PM_PCI_ID(dev) ((dev)->bus->number << 16 | (dev)->devfn)
 
-/*
- * Request handler callback
- */
-struct pm_dev;
-
-typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
-
-/*
- * Dynamic device information
- */
-struct pm_dev
-{
-	pm_dev_t	 type;
-	unsigned long	 id;
-	pm_callback	 callback;
-	void		*data;
-
-	unsigned long	 flags;
-	unsigned long	 state;
-	unsigned long	 prev_state;
-
-	struct list_head entry;
-};
-
 /* Functions above this comment are list-based old-style power
  * management. Please avoid using them.  */
 
-- 
cgit v1.2.3


From e7ecb331e11d1f7aa66aeef9170fc20781c9bb55 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Wed, 23 Jul 2008 21:28:35 -0700
Subject: pm: remove remaining obsolete definitions from pm.h

Remove the remaining obsolete definitions from include/linux/pm.h and move
the definitions of PM_SUSPEND and PM_RESUME to the header of h3600 which
is the only user of them.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-arm/arch-sa1100/h3600.h |  5 ++++
 include/linux/pm.h                  | 46 -------------------------------------
 2 files changed, 5 insertions(+), 46 deletions(-)

diff --git a/include/asm-arm/arch-sa1100/h3600.h b/include/asm-arm/arch-sa1100/h3600.h
index 1b635597157..3ca0ecf095e 100644
--- a/include/asm-arm/arch-sa1100/h3600.h
+++ b/include/asm-arm/arch-sa1100/h3600.h
@@ -23,6 +23,11 @@
 #ifndef _INCLUDE_H3600_H_
 #define _INCLUDE_H3600_H_
 
+typedef int __bitwise pm_request_t;
+
+#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
+#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
+
 /* generalized support for H3xxx series Compaq Pocket PC's */
 #define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
 
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 5bf1ce89cfb..390dd95a375 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -25,52 +25,6 @@
 #include <asm/atomic.h>
 #include <asm/errno.h>
 
-/*
- * Power management requests... these are passed to pm_send_all() and friends.
- *
- * these functions are old and deprecated, see below.
- */
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
-#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
-
-
-/*
- * Device types... these are passed to pm_register
- */
-typedef int __bitwise pm_dev_t;
-
-#define PM_UNKNOWN_DEV	((__force pm_dev_t) 0)	/* generic */
-#define PM_SYS_DEV	((__force pm_dev_t) 1)	/* system device (fan, KB controller, ...) */
-#define PM_PCI_DEV	((__force pm_dev_t) 2)	/* PCI device */
-#define PM_USB_DEV	((__force pm_dev_t) 3)	/* USB device */
-#define PM_SCSI_DEV	((__force pm_dev_t) 4)	/* SCSI device */
-#define PM_ISA_DEV	((__force pm_dev_t) 5)	/* ISA device */
-#define	PM_MTD_DEV	((__force pm_dev_t) 6)	/* Memory Technology Device */
-
-/*
- * System device hardware ID (PnP) values
- */
-enum
-{
-	PM_SYS_UNKNOWN = 0x00000000, /* generic */
-	PM_SYS_KBC =	 0x41d00303, /* keyboard controller */
-	PM_SYS_COM =	 0x41d00500, /* serial port */
-	PM_SYS_IRDA =	 0x41d00510, /* IRDA controller */
-	PM_SYS_FDC =	 0x41d00700, /* floppy controller */
-	PM_SYS_VGA =	 0x41d00900, /* VGA controller */
-	PM_SYS_PCMCIA =	 0x41d00e00, /* PCMCIA controller */
-};
-
-/*
- * Device identifier
- */
-#define PM_PCI_ID(dev) ((dev)->bus->number << 16 | (dev)->devfn)
-
-/* Functions above this comment are list-based old-style power
- * management. Please avoid using them.  */
-
 /*
  * Callbacks for platform drivers to implement.
  */
-- 
cgit v1.2.3


From 40b4ac33b4d1bdd5cbeb2241be2399c550fa3696 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Wed, 23 Jul 2008 21:28:36 -0700
Subject: pm: remove obsolete piece of PM documentation

Remove some obsolete PM documentation.

The majority of contents of Documentation/power/pm.txt are
outdated.  Remove the outdated parts of this file and move the rest
to Documentation/power/apm-acpi.txt .  Update the index in
Documentation/power/ as appropriate.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/power/00-INDEX     |   4 +-
 Documentation/power/apm-acpi.txt |  32 +++++
 Documentation/power/pm.txt       | 257 ---------------------------------------
 3 files changed, 34 insertions(+), 259 deletions(-)
 create mode 100644 Documentation/power/apm-acpi.txt
 delete mode 100644 Documentation/power/pm.txt

diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX
index a55d7f1c836..fb742c213c9 100644
--- a/Documentation/power/00-INDEX
+++ b/Documentation/power/00-INDEX
@@ -1,5 +1,7 @@
 00-INDEX
 	- This file
+apm-acpi.txt
+	- basic info about the APM and ACPI support.
 basic-pm-debugging.txt
 	- Debugging suspend and resume
 devices.txt
@@ -14,8 +16,6 @@ notifiers.txt
 	- Registering suspend notifiers in device drivers
 pci.txt
 	- How the PCI Subsystem Does Power Management
-pm.txt
-	- info on Linux power management support.
 pm_qos_interface.txt
 	- info on Linux PM Quality of Service interface
 power_supply_class.txt
diff --git a/Documentation/power/apm-acpi.txt b/Documentation/power/apm-acpi.txt
new file mode 100644
index 00000000000..1bd799dc17e
--- /dev/null
+++ b/Documentation/power/apm-acpi.txt
@@ -0,0 +1,32 @@
+APM or ACPI?
+------------
+If you have a relatively recent x86 mobile, desktop, or server system,
+odds are it supports either Advanced Power Management (APM) or
+Advanced Configuration and Power Interface (ACPI).  ACPI is the newer
+of the two technologies and puts power management in the hands of the
+operating system, allowing for more intelligent power management than
+is possible with BIOS controlled APM.
+
+The best way to determine which, if either, your system supports is to
+build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
+enabled by default).  If a working ACPI implementation is found, the
+ACPI driver will override and disable APM, otherwise the APM driver
+will be used.
+
+No, sorry, you cannot have both ACPI and APM enabled and running at
+once.  Some people with broken ACPI or broken APM implementations
+would like to use both to get a full set of working features, but you
+simply cannot mix and match the two.  Only one power management
+interface can be in control of the machine at once.  Think about it..
+
+User-space Daemons
+------------------
+Both APM and ACPI rely on user-space daemons, apmd and acpid
+respectively, to be completely functional.  Obtain both of these
+daemons from your Linux distribution or from the Internet (see below)
+and be sure that they are started sometime in the system boot process.
+Go ahead and start both.  If ACPI or APM is not available on your
+system the associated daemon will exit gracefully.
+
+  apmd:   http://worldvisions.ca/~apenwarr/apmd/
+  acpid:  http://acpid.sf.net/
diff --git a/Documentation/power/pm.txt b/Documentation/power/pm.txt
deleted file mode 100644
index be841507e43..00000000000
--- a/Documentation/power/pm.txt
+++ /dev/null
@@ -1,257 +0,0 @@
-               Linux Power Management Support
-
-This document briefly describes how to use power management with your
-Linux system and how to add power management support to Linux drivers.
-
-APM or ACPI?
-------------
-If you have a relatively recent x86 mobile, desktop, or server system,
-odds are it supports either Advanced Power Management (APM) or
-Advanced Configuration and Power Interface (ACPI).  ACPI is the newer
-of the two technologies and puts power management in the hands of the
-operating system, allowing for more intelligent power management than
-is possible with BIOS controlled APM.
-
-The best way to determine which, if either, your system supports is to
-build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
-enabled by default).  If a working ACPI implementation is found, the
-ACPI driver will override and disable APM, otherwise the APM driver
-will be used.
-
-No, sorry, you cannot have both ACPI and APM enabled and running at
-once.  Some people with broken ACPI or broken APM implementations
-would like to use both to get a full set of working features, but you
-simply cannot mix and match the two.  Only one power management
-interface can be in control of the machine at once.  Think about it..
-
-User-space Daemons
-------------------
-Both APM and ACPI rely on user-space daemons, apmd and acpid
-respectively, to be completely functional.  Obtain both of these
-daemons from your Linux distribution or from the Internet (see below)
-and be sure that they are started sometime in the system boot process.
-Go ahead and start both.  If ACPI or APM is not available on your
-system the associated daemon will exit gracefully.
-
-  apmd:   http://worldvisions.ca/~apenwarr/apmd/
-  acpid:  http://acpid.sf.net/
-
-Driver Interface -- OBSOLETE, DO NOT USE!
-----------------*************************
-
-Note: pm_register(), pm_access(), pm_dev_idle() and friends are
-obsolete. Please do not use them. Instead you should properly hook
-your driver into the driver model, and use its suspend()/resume()
-callbacks to do this kind of stuff.
-
-If you are writing a new driver or maintaining an old driver, it
-should include power management support.  Without power management
-support, a single driver may prevent a system with power management
-capabilities from ever being able to suspend (safely).
-
-Overview:
-1) Register each instance of a device with "pm_register"
-2) Call "pm_access" before accessing the hardware.
-   (this will ensure that the hardware is awake and ready)
-3) Your "pm_callback" is called before going into a
-   suspend state (ACPI D1-D3) or after resuming (ACPI D0)
-   from a suspend.
-4) Call "pm_dev_idle" when the device is not being used
-   (optional but will improve device idle detection)
-5) When unloaded, unregister the device with "pm_unregister"
-
-/*
- * Description: Register a device with the power-management subsystem
- *
- * Parameters:
- *   type - device type (PCI device, system device, ...)
- *   id - instance number or unique identifier
- *   cback - request handler callback (suspend, resume, ...)
- *
- * Returns: Registered PM device or NULL on error
- *
- * Examples:
- *   dev = pm_register(PM_SYS_DEV, PM_SYS_VGA, vga_callback);
- *
- *   struct pci_dev *pci_dev = pci_find_dev(...);
- *   dev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), callback);
- */
-struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback cback);
-
-/*
- * Description: Unregister a device with the power management subsystem
- *
- * Parameters:
- *   dev - PM device previously returned from pm_register
- */
-void pm_unregister(struct pm_dev *dev);
-
-/*
- * Description: Unregister all devices with a matching callback function
- *
- * Parameters:
- *   cback - previously registered request callback
- *
- * Notes: Provided for easier porting from old APM interface
- */
-void pm_unregister_all(pm_callback cback);
-
-/*
- * Power management request callback
- *
- * Parameters:
- *   dev - PM device previously returned from pm_register
- *   rqst - request type
- *   data - data, if any, associated with the request
- *
- * Returns: 0 if the request is successful
- *          EINVAL if the request is not supported
- *          EBUSY if the device is now busy and cannot handle the request
- *          ENOMEM if the device was unable to handle the request due to memory
- *
- * Details: The device request callback will be called before the
- *          device/system enters a suspend state (ACPI D1-D3) or
- *          or after the device/system resumes from suspend (ACPI D0).
- *          For PM_SUSPEND, the ACPI D-state being entered is passed
- *          as the "data" argument to the callback.  The device
- *          driver should save (PM_SUSPEND) or restore (PM_RESUME)
- *          device context when the request callback is called.
- *
- *          Once a driver returns 0 (success) from a suspend
- *          request, it should not process any further requests or
- *          access the device hardware until a call to "pm_access" is made.
- */
-typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
-
-Driver Details
---------------
-This is just a quick Q&A as a stopgap until a real driver writers'
-power management guide is available.
-
-Q: When is a device suspended?
-
-Devices can be suspended based on direct user request (eg. laptop lid
-closes), system power policy (eg.  sleep after 30 minutes of console
-inactivity), or device power policy (eg. power down device after 5
-minutes of inactivity)
-
-Q: Must a driver honor a suspend request?
-
-No, a driver can return -EBUSY from a suspend request and this
-will stop the system from suspending.  When a suspend request
-fails, all suspended devices are resumed and the system continues
-to run.  Suspend can be retried at a later time.
-
-Q: Can the driver block suspend/resume requests?
-
-Yes, a driver can delay its return from a suspend or resume
-request until the device is ready to handle requests.  It
-is advantageous to return as quickly as possible from a
-request as suspend/resume are done serially.
-
-Q: What context is a suspend/resume initiated from?
-
-A suspend or resume is initiated from a kernel thread context.
-It is safe to block, allocate memory, initiate requests
-or anything else you can do within the kernel.
-
-Q: Will requests continue to arrive after a suspend?
-
-Possibly.  It is the driver's responsibility to queue(*),
-fail, or drop any requests that arrive after returning
-success to a suspend request.  It is important that the
-driver not access its device until after it receives
-a resume request as the device's bus may no longer
-be active.
-
-(*) If a driver queues requests for processing after
-    resume be aware that the device, network, etc.
-    might be in a different state than at suspend time.
-    It's probably better to drop requests unless
-    the driver is a storage device.
-
-Q: Do I have to manage bus-specific power management registers
-
-No.  It is the responsibility of the bus driver to manage
-PCI, USB, etc. power management registers.  The bus driver
-or the power management subsystem will also enable any
-wake-on functionality that the device has.
-
-Q: So, really, what do I need to do to support suspend/resume?
-
-You need to save any device context that would
-be lost if the device was powered off and then restore
-it at resume time.  When ACPI is active, there are
-three levels of device suspend states; D1, D2, and D3.
-(The suspend state is passed as the "data" argument
-to the device callback.)  With D3, the device is powered
-off and loses all context, D1 and D2 are shallower power
-states and require less device context to be saved.  To
-play it safe, just save everything at suspend and restore
-everything at resume.
-
-Q: Where do I store device context for suspend?
-
-Anywhere in memory, kmalloc a buffer or store it
-in the device descriptor.  You are guaranteed that the
-contents of memory will be restored and accessible
-before resume, even when the system suspends to disk.
-
-Q: What do I need to do for ACPI vs. APM vs. etc?
-
-Drivers need not be aware of the specific power management
-technology that is active.  They just need to be aware
-of when the overlying power management system requests
-that they suspend or resume.
-
-Q: What about device dependencies?
-
-When a driver registers a device, the power management
-subsystem uses the information provided to build a
-tree of device dependencies (eg. USB device X is on
-USB controller Y which is on PCI bus Z)  When power
-management wants to suspend a device, it first sends
-a suspend request to its driver, then the bus driver,
-and so on up to the system bus.  Device resumes
-proceed in the opposite direction.
-
-Q: Who do I contact for additional information about
-   enabling power management for my specific driver/device?
-
-ACPI Development mailing list: linux-acpi@vger.kernel.org
-
-System Interface -- OBSOLETE, DO NOT USE!
-----------------*************************
-If you are providing new power management support to Linux (ie.
-adding support for something like APM or ACPI), you should
-communicate with drivers through the existing generic power
-management interface.
-
-/*
- * Send a request to all devices
- *
- * Parameters:
- *   rqst - request type
- *   data - data, if any, associated with the request
- *
- * Returns: 0 if the request is successful
- *          See "pm_callback" return for errors
- *
- * Details: Walk list of registered devices and call pm_send
- *          for each until complete or an error is encountered.
- *          If an error is encountered for a suspend request,
- *          return all devices to the state they were in before
- *          the suspend request.
- */
-int pm_send_all(pm_request_t rqst, void *data);
-
-/*
- * Find a matching device
- *
- * Parameters:
- *   type - device type (PCI device, system device, or 0 to match all devices)
- *   from - previous match or NULL to start from the beginning
- *
- * Returns: Matching device or NULL if none found
- */
-struct pm_dev *pm_find(pm_dev_t type, struct pm_dev *from);
-- 
cgit v1.2.3


From 8c363265d57d755e62053e9f69a1f2164e83f7ea Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Wed, 23 Jul 2008 21:28:37 -0700
Subject: pm: drop unnecessary includes from pm.h

Drop unnecessary includes from include/linux/pm.h .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/pm.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/pm.h b/include/linux/pm.h
index 390dd95a375..ed98d967f9f 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -22,8 +22,6 @@
 #define _LINUX_PM_H
 
 #include <linux/list.h>
-#include <asm/atomic.h>
-#include <asm/errno.h>
 
 /*
  * Callbacks for platform drivers to implement.
-- 
cgit v1.2.3


From 8111d1b552349921aae1acf73e4e8cea98e80970 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 23 Jul 2008 21:28:37 -0700
Subject: pm: add new PM_EVENT codes for runtime power transitions

This patch (as1112) adds some new PM_EVENT_* codes for use by kernel
subsystems.  They describe runtime power-state transitions of the sort already
implemented by the USB subsystem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/pm.h | 37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/include/linux/pm.h b/include/linux/pm.h
index ed98d967f9f..4dcce54b6d7 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -245,6 +245,21 @@ struct pm_ext_ops {
  * RECOVER	Creation of a hibernation image or restoration of the main
  *		memory contents from a hibernation image has failed, call
  *		->thaw() and ->complete() for all devices.
+ *
+ * The following PM_EVENT_ messages are defined for internal use by
+ * kernel subsystems.  They are never issued by the PM core.
+ *
+ * USER_SUSPEND		Manual selective suspend was issued by userspace.
+ *
+ * USER_RESUME		Manual selective resume was issued by userspace.
+ *
+ * REMOTE_WAKEUP	Remote-wakeup request was received from the device.
+ *
+ * AUTO_SUSPEND		Automatic (device idle) runtime suspend was
+ *			initiated by the subsystem.
+ *
+ * AUTO_RESUME		Automatic (device needed) runtime resume was
+ *			requested by a driver.
  */
 
 #define PM_EVENT_ON		0x0000
@@ -256,9 +271,18 @@ struct pm_ext_ops {
 #define PM_EVENT_THAW		0x0020
 #define PM_EVENT_RESTORE	0x0040
 #define PM_EVENT_RECOVER	0x0080
+#define PM_EVENT_USER		0x0100
+#define PM_EVENT_REMOTE		0x0200
+#define PM_EVENT_AUTO		0x0400
 
-#define PM_EVENT_SLEEP	(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+#define PM_EVENT_SLEEP		(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+#define PM_EVENT_USER_SUSPEND	(PM_EVENT_USER | PM_EVENT_SUSPEND)
+#define PM_EVENT_USER_RESUME	(PM_EVENT_USER | PM_EVENT_RESUME)
+#define PM_EVENT_REMOTE_WAKEUP	(PM_EVENT_REMOTE | PM_EVENT_RESUME)
+#define PM_EVENT_AUTO_SUSPEND	(PM_EVENT_AUTO | PM_EVENT_SUSPEND)
+#define PM_EVENT_AUTO_RESUME	(PM_EVENT_AUTO | PM_EVENT_RESUME)
 
+#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
 #define PMSG_FREEZE	((struct pm_message){ .event = PM_EVENT_FREEZE, })
 #define PMSG_QUIESCE	((struct pm_message){ .event = PM_EVENT_QUIESCE, })
 #define PMSG_SUSPEND	((struct pm_message){ .event = PM_EVENT_SUSPEND, })
@@ -267,7 +291,16 @@ struct pm_ext_ops {
 #define PMSG_THAW	((struct pm_message){ .event = PM_EVENT_THAW, })
 #define PMSG_RESTORE	((struct pm_message){ .event = PM_EVENT_RESTORE, })
 #define PMSG_RECOVER	((struct pm_message){ .event = PM_EVENT_RECOVER, })
-#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
+#define PMSG_USER_SUSPEND	((struct pm_messge) \
+					{ .event = PM_EVENT_USER_SUSPEND, })
+#define PMSG_USER_RESUME	((struct pm_messge) \
+					{ .event = PM_EVENT_USER_RESUME, })
+#define PMSG_REMOTE_RESUME	((struct pm_messge) \
+					{ .event = PM_EVENT_REMOTE_RESUME, })
+#define PMSG_AUTO_SUSPEND	((struct pm_messge) \
+					{ .event = PM_EVENT_AUTO_SUSPEND, })
+#define PMSG_AUTO_RESUME		((struct pm_messge) \
+					{ .event = PM_EVENT_AUTO_RESUME, })
 
 /**
  * Device power management states
-- 
cgit v1.2.3


From 0d83304c7e7bd3b05be90281b3a47841bc8f057a Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Wed, 23 Jul 2008 21:28:38 -0700
Subject: pm: hibernation: simplify memory bitmap

This patch simplifies the memory bitmap manipulations.

- remove the member size in struct bm_block

It is not necessary for struct bm_block to have the number of bit chunks that
can be calculated by using end_pfn and start_pfn.

- use find_next_bit() for memory_bm_next_pfn

No need to invent the bitmap library only for the memory bitmap.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/power/snapshot.c | 88 ++++++++++++-------------------------------------
 1 file changed, 21 insertions(+), 67 deletions(-)

diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 5f91a07c4ea..5d2ab836e99 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -205,8 +205,7 @@ static void chain_free(struct chain_allocator *ca, int clear_page_nosave)
  *	objects.  The main list's elements are of type struct zone_bitmap
  *	and each of them corresonds to one zone.  For each zone bitmap
  *	object there is a list of objects of type struct bm_block that
- *	represent each blocks of bit chunks in which information is
- *	stored.
+ *	represent each blocks of bitmap in which information is stored.
  *
  *	struct memory_bitmap contains a pointer to the main list of zone
  *	bitmap objects, a struct bm_position used for browsing the bitmap,
@@ -224,26 +223,27 @@ static void chain_free(struct chain_allocator *ca, int clear_page_nosave)
  *	pfns that correspond to the start and end of the represented zone.
  *
  *	struct bm_block contains a pointer to the memory page in which
- *	information is stored (in the form of a block of bit chunks
- *	of type unsigned long each).  It also contains the pfns that
- *	correspond to the start and end of the represented memory area and
- *	the number of bit chunks in the block.
+ *	information is stored (in the form of a block of bitmap)
+ *	It also contains the pfns that correspond to the start and end of
+ *	the represented memory area.
  */
 
 #define BM_END_OF_MAP	(~0UL)
 
-#define BM_CHUNKS_PER_BLOCK	(PAGE_SIZE / sizeof(long))
-#define BM_BITS_PER_CHUNK	(sizeof(long) << 3)
 #define BM_BITS_PER_BLOCK	(PAGE_SIZE << 3)
 
 struct bm_block {
 	struct bm_block *next;		/* next element of the list */
 	unsigned long start_pfn;	/* pfn represented by the first bit */
 	unsigned long end_pfn;	/* pfn represented by the last bit plus 1 */
-	unsigned int size;	/* number of bit chunks */
-	unsigned long *data;	/* chunks of bits representing pages */
+	unsigned long *data;	/* bitmap representing pages */
 };
 
+static inline unsigned long bm_block_bits(struct bm_block *bb)
+{
+	return bb->end_pfn - bb->start_pfn;
+}
+
 struct zone_bitmap {
 	struct zone_bitmap *next;	/* next element of the list */
 	unsigned long start_pfn;	/* minimal pfn in this zone */
@@ -257,7 +257,6 @@ struct zone_bitmap {
 struct bm_position {
 	struct zone_bitmap *zone_bm;
 	struct bm_block *block;
-	int chunk;
 	int bit;
 };
 
@@ -272,12 +271,6 @@ struct memory_bitmap {
 
 /* Functions that operate on memory bitmaps */
 
-static inline void memory_bm_reset_chunk(struct memory_bitmap *bm)
-{
-	bm->cur.chunk = 0;
-	bm->cur.bit = -1;
-}
-
 static void memory_bm_position_reset(struct memory_bitmap *bm)
 {
 	struct zone_bitmap *zone_bm;
@@ -285,7 +278,7 @@ static void memory_bm_position_reset(struct memory_bitmap *bm)
 	zone_bm = bm->zone_bm_list;
 	bm->cur.zone_bm = zone_bm;
 	bm->cur.block = zone_bm->bm_blocks;
-	memory_bm_reset_chunk(bm);
+	bm->cur.bit = 0;
 }
 
 static void memory_bm_free(struct memory_bitmap *bm, int clear_nosave_free);
@@ -394,12 +387,10 @@ memory_bm_create(struct memory_bitmap *bm, gfp_t gfp_mask, int safe_needed)
 			bb->start_pfn = pfn;
 			if (nr >= BM_BITS_PER_BLOCK) {
 				pfn += BM_BITS_PER_BLOCK;
-				bb->size = BM_CHUNKS_PER_BLOCK;
 				nr -= BM_BITS_PER_BLOCK;
 			} else {
 				/* This is executed only once in the loop */
 				pfn += nr;
-				bb->size = DIV_ROUND_UP(nr, BM_BITS_PER_CHUNK);
 			}
 			bb->end_pfn = pfn;
 			bb = bb->next;
@@ -478,8 +469,8 @@ static int memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn,
 	}
 	zone_bm->cur_block = bb;
 	pfn -= bb->start_pfn;
-	*bit_nr = pfn % BM_BITS_PER_CHUNK;
-	*addr = bb->data + pfn / BM_BITS_PER_CHUNK;
+	*bit_nr = pfn;
+	*addr = bb->data;
 	return 0;
 }
 
@@ -528,36 +519,6 @@ static int memory_bm_test_bit(struct memory_bitmap *bm, unsigned long pfn)
 	return test_bit(bit, addr);
 }
 
-/* Two auxiliary functions for memory_bm_next_pfn */
-
-/* Find the first set bit in the given chunk, if there is one */
-
-static inline int next_bit_in_chunk(int bit, unsigned long *chunk_p)
-{
-	bit++;
-	while (bit < BM_BITS_PER_CHUNK) {
-		if (test_bit(bit, chunk_p))
-			return bit;
-
-		bit++;
-	}
-	return -1;
-}
-
-/* Find a chunk containing some bits set in given block of bits */
-
-static inline int next_chunk_in_block(int n, struct bm_block *bb)
-{
-	n++;
-	while (n < bb->size) {
-		if (bb->data[n])
-			return n;
-
-		n++;
-	}
-	return -1;
-}
-
 /**
  *	memory_bm_next_pfn - find the pfn that corresponds to the next set bit
  *	in the bitmap @bm.  If the pfn cannot be found, BM_END_OF_MAP is
@@ -571,40 +532,33 @@ static unsigned long memory_bm_next_pfn(struct memory_bitmap *bm)
 {
 	struct zone_bitmap *zone_bm;
 	struct bm_block *bb;
-	int chunk;
 	int bit;
 
 	do {
 		bb = bm->cur.block;
 		do {
-			chunk = bm->cur.chunk;
 			bit = bm->cur.bit;
-			do {
-				bit = next_bit_in_chunk(bit, bb->data + chunk);
-				if (bit >= 0)
-					goto Return_pfn;
-
-				chunk = next_chunk_in_block(chunk, bb);
-				bit = -1;
-			} while (chunk >= 0);
+			bit = find_next_bit(bb->data, bm_block_bits(bb), bit);
+			if (bit < bm_block_bits(bb))
+				goto Return_pfn;
+
 			bb = bb->next;
 			bm->cur.block = bb;
-			memory_bm_reset_chunk(bm);
+			bm->cur.bit = 0;
 		} while (bb);
 		zone_bm = bm->cur.zone_bm->next;
 		if (zone_bm) {
 			bm->cur.zone_bm = zone_bm;
 			bm->cur.block = zone_bm->bm_blocks;
-			memory_bm_reset_chunk(bm);
+			bm->cur.bit = 0;
 		}
 	} while (zone_bm);
 	memory_bm_position_reset(bm);
 	return BM_END_OF_MAP;
 
  Return_pfn:
-	bm->cur.chunk = chunk;
-	bm->cur.bit = bit;
-	return bb->start_pfn + chunk * BM_BITS_PER_CHUNK + bit;
+	bm->cur.bit = bit + 1;
+	return bb->start_pfn + bit;
 }
 
 /**
-- 
cgit v1.2.3


From c1a220e7acf8ad2c03504891f4a70cd9c32c904b Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Wed, 23 Jul 2008 21:28:39 -0700
Subject: pm: introduce new interfaces schedule_work_on() and queue_work_on()

This interface allows adding a job on a specific cpu.

Although a work struct on a cpu will be scheduled to other cpu if the cpu
dies, there is a recursion if a work task tries to offline the cpu it's
running on.  we need to schedule the task to a specific cpu in this case.
http://bugzilla.kernel.org/show_bug.cgi?id=10897

[oleg@tv-sign.ru: cleanups]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Rus <harbour@sfinx.od.ua>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/workqueue.h |  3 +++
 kernel/workqueue.c        | 39 ++++++++++++++++++++++++++++++++++++++-
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 542526c6e8e..14d47120682 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -179,6 +179,8 @@ __create_workqueue_key(const char *name, int singlethread,
 extern void destroy_workqueue(struct workqueue_struct *wq);
 
 extern int queue_work(struct workqueue_struct *wq, struct work_struct *work);
+extern int queue_work_on(int cpu, struct workqueue_struct *wq,
+			struct work_struct *work);
 extern int queue_delayed_work(struct workqueue_struct *wq,
 			struct delayed_work *work, unsigned long delay);
 extern int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
@@ -188,6 +190,7 @@ extern void flush_workqueue(struct workqueue_struct *wq);
 extern void flush_scheduled_work(void);
 
 extern int schedule_work(struct work_struct *work);
+extern int schedule_work_on(int cpu, struct work_struct *work);
 extern int schedule_delayed_work(struct delayed_work *work, unsigned long delay);
 extern int schedule_delayed_work_on(int cpu, struct delayed_work *work,
 					unsigned long delay);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index a6d36346d10..6fd158b2102 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -140,7 +140,6 @@ static void insert_work(struct cpu_workqueue_struct *cwq,
 	wake_up(&cwq->more_work);
 }
 
-/* Preempt must be disabled. */
 static void __queue_work(struct cpu_workqueue_struct *cwq,
 			 struct work_struct *work)
 {
@@ -175,6 +174,31 @@ int queue_work(struct workqueue_struct *wq, struct work_struct *work)
 }
 EXPORT_SYMBOL_GPL(queue_work);
 
+/**
+ * queue_work_on - queue work on specific cpu
+ * @cpu: CPU number to execute work on
+ * @wq: workqueue to use
+ * @work: work to queue
+ *
+ * Returns 0 if @work was already on a queue, non-zero otherwise.
+ *
+ * We queue the work to a specific CPU, the caller must ensure it
+ * can't go away.
+ */
+int
+queue_work_on(int cpu, struct workqueue_struct *wq, struct work_struct *work)
+{
+	int ret = 0;
+
+	if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
+		BUG_ON(!list_empty(&work->entry));
+		__queue_work(wq_per_cpu(wq, cpu), work);
+		ret = 1;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(queue_work_on);
+
 static void delayed_work_timer_fn(unsigned long __data)
 {
 	struct delayed_work *dwork = (struct delayed_work *)__data;
@@ -553,6 +577,19 @@ int schedule_work(struct work_struct *work)
 }
 EXPORT_SYMBOL(schedule_work);
 
+/*
+ * schedule_work_on - put work task on a specific cpu
+ * @cpu: cpu to put the work task on
+ * @work: job to be done
+ *
+ * This puts a job on a specific cpu
+ */
+int schedule_work_on(int cpu, struct work_struct *work)
+{
+	return queue_work_on(cpu, keventd_wq, work);
+}
+EXPORT_SYMBOL(schedule_work_on);
+
 /**
  * schedule_delayed_work - put work task in global workqueue after delay
  * @dwork: job to be done
-- 
cgit v1.2.3


From 2f15fc4bdf91eb399da3f47a09c55831d9f22826 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Wed, 23 Jul 2008 21:28:40 -0700
Subject: pm: schedule sysrq poweroff on boot cpu

schedule sysrq poweroff on boot cpu.

sysrq poweroff needs to disable nonboot cpus, and we need to run this on boot
cpu to avoid any recursion.  http://bugzilla.kernel.org/show_bug.cgi?id=10897

[kosaki.motohiro@jp.fujitsu.com: build fix]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Rus <harbour@sfinx.od.ua>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/power/poweroff.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/power/poweroff.c b/kernel/power/poweroff.c
index 678ec736076..72016f05147 100644
--- a/kernel/power/poweroff.c
+++ b/kernel/power/poweroff.c
@@ -10,6 +10,7 @@
 #include <linux/pm.h>
 #include <linux/workqueue.h>
 #include <linux/reboot.h>
+#include <linux/cpumask.h>
 
 /*
  * When the user hits Sys-Rq o to power down the machine this is the
@@ -25,7 +26,8 @@ static DECLARE_WORK(poweroff_work, do_poweroff);
 
 static void handle_poweroff(int key, struct tty_struct *tty)
 {
-	schedule_work(&poweroff_work);
+	/* run sysrq poweroff on boot cpu */
+	schedule_work_on(first_cpu(cpu_online_map), &poweroff_work);
 }
 
 static struct sysrq_key_op	sysrq_poweroff_op = {
-- 
cgit v1.2.3


From bdfe6b7c681669148dae4db27eb24ee5408ba371 Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Wed, 23 Jul 2008 21:28:41 -0700
Subject: pm: acpi hibernation: utilize hardware signature

ACPI defines a hardware signature.  BIOS calculates the signature according to
hardware configure and if hardware changes while hibernated, the signature
will change.  In that case, S4 resume should fail.

Still, there may be systems on which this mechanism does not work correctly,
so it is better to provide a workaround for them.  For this reason, add a new
switch to the acpi_sleep= command line argument allowing one to disable
hardware signature checking.

[shaohua.li@intel.com: build fix]
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <Valdis.Kletnieks@vt.edu>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt |  4 +++-
 arch/x86/kernel/acpi/sleep.c        |  4 ++++
 drivers/acpi/sleep/main.c           | 22 ++++++++++++++++++++++
 include/linux/acpi.h                |  1 +
 4 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4d705713cab..497a98dafda 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -148,10 +148,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			default: 0
 
 	acpi_sleep=	[HW,ACPI] Sleep options
-			Format: { s3_bios, s3_mode, s3_beep, old_ordering }
+			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, old_ordering }
 			See Documentation/power/video.txt for s3_bios and s3_mode.
 			s3_beep is for debugging; it makes the PC's speaker beep
 			as soon as the kernel's real-mode entry point is called.
+			s4_nohwsig prevents ACPI hardware signature from being
+			used during resume from hibernation.
 			old_ordering causes the ACPI 1.0 ordering of the _PTS
 			control method, wrt putting devices into low power
 			states, to be enforced (the ACPI 2.0 ordering of _PTS is
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index a3ddad18aaa..fa2161d5003 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -150,6 +150,10 @@ static int __init acpi_sleep_setup(char *str)
 			acpi_realmode_flags |= 2;
 		if (strncmp(str, "s3_beep", 7) == 0)
 			acpi_realmode_flags |= 4;
+#ifdef CONFIG_HIBERNATION
+		if (strncmp(str, "s4_nohwsig", 10) == 0)
+			acpi_no_s4_hw_signature();
+#endif
 		if (strncmp(str, "old_ordering", 12) == 0)
 			acpi_old_suspend_ordering();
 		str = strchr(str, ',');
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 0489a7d1d42..313507accf1 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -283,6 +283,15 @@ static struct platform_suspend_ops acpi_suspend_ops_old = {
 #endif /* CONFIG_SUSPEND */
 
 #ifdef CONFIG_HIBERNATION
+static unsigned long s4_hardware_signature;
+static struct acpi_table_facs *facs;
+static bool nosigcheck;
+
+void __init acpi_no_s4_hw_signature(void)
+{
+	nosigcheck = true;
+}
+
 static int acpi_hibernation_begin(void)
 {
 	acpi_target_sleep_state = ACPI_STATE_S4;
@@ -316,6 +325,12 @@ static void acpi_hibernation_leave(void)
 	acpi_enable();
 	/* Reprogram control registers and execute _BFS */
 	acpi_leave_sleep_state_prep(ACPI_STATE_S4);
+	/* Check the hardware signature */
+	if (facs && s4_hardware_signature != facs->hardware_signature) {
+		printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
+			"cannot resume!\n");
+		panic("ACPI S4 hardware signature mismatch");
+	}
 }
 
 static void acpi_pm_enable_gpes(void)
@@ -544,6 +559,13 @@ int __init acpi_sleep_init(void)
 			&acpi_hibernation_ops_old : &acpi_hibernation_ops);
 		sleep_states[ACPI_STATE_S4] = 1;
 		printk(" S4");
+		if (!nosigcheck) {
+			acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS,
+				(struct acpi_table_header **)&facs);
+			if (facs)
+				s4_hardware_signature =
+					facs->hardware_signature;
+		}
 	}
 #endif
 	status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index a1717763937..702f79dad16 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -236,6 +236,7 @@ int acpi_check_mem_region(resource_size_t start, resource_size_t n,
 		      const char *name);
 
 #ifdef CONFIG_PM_SLEEP
+void __init acpi_no_s4_hw_signature(void);
 void __init acpi_old_suspend_ordering(void);
 #endif /* CONFIG_PM_SLEEP */
 #else	/* CONFIG_ACPI */
-- 
cgit v1.2.3


From e41fb7c58e3ca18ec5c9c9bb7bb68e8e653c9e8e Mon Sep 17 00:00:00 2001
From: Carlos Corbacho <carlos@strangeworlds.co.uk>
Date: Wed, 23 Jul 2008 21:28:43 -0700
Subject: pm: acpi pm: add DMI quirk list for ACPI 1.0 suspend ordering

There are a few BIOSes that we know of already that need to use the ACPI 1.0
suspend order.  This appears to be only be a small minority of mostly nVidia
based systems.

Based on observation of Windows behaviour, it's clear that Windows is also
doing maintaining its own list of broken hardware that needs this workaround.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/acpi/sleep/main.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 313507accf1..d13194a031b 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -280,6 +280,24 @@ static struct platform_suspend_ops acpi_suspend_ops_old = {
 	.end = acpi_pm_end,
 	.recover = acpi_pm_finish,
 };
+
+static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
+{
+	old_suspend_ordering = true;
+	return 0;
+}
+
+static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Abit KN9 (nForce4 variant)",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
+		DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
+		},
+	},
+	{},
+};
 #endif /* CONFIG_SUSPEND */
 
 #ifdef CONFIG_HIBERNATION
@@ -531,6 +549,8 @@ int __init acpi_sleep_init(void)
 	u8 type_a, type_b;
 #ifdef CONFIG_SUSPEND
 	int i = 0;
+
+	dmi_check_system(acpisleep_dmi_table);
 #endif
 
 	if (acpi_disabled)
-- 
cgit v1.2.3


From f0af566da6e9a4a2f5a83c5a70f3d0a772050e21 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 23 Jul 2008 21:28:44 -0700
Subject: pm: fix try_to_freeze_tasks()'s use of do_div()

Fix try_to_freeze_tasks()'s use of do_div() on an s64 by making
elapsed_csecs64 a u64 instead and dividing that.

Possibly this should be guarded lest the interval calculation turn up
negative, but the possible negativity of the result of the division is
cast away anyway.

This was introduced by patch 438e2ce68dfd4af4cfcec2f873564fb921db4bb5.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/power/process.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/power/process.c b/kernel/power/process.c
index 5fb87652f21..278946aecaf 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -149,7 +149,7 @@ static int try_to_freeze_tasks(bool sig_only)
 	unsigned long end_time;
 	unsigned int todo;
 	struct timeval start, end;
-	s64 elapsed_csecs64;
+	u64 elapsed_csecs64;
 	unsigned int elapsed_csecs;
 
 	do_gettimeofday(&start);
-- 
cgit v1.2.3


From 912019572180f287e85b5534fbb1c1e3ca6df6c9 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:28:45 -0700
Subject: mn10300: move sg_dma_{address,len}() to asm/scatterlist.h

mn10300 was the only architecture where sg_dma_{address,len}() were not
in asm/scatterlist.h, and it's not a big surprise that this caused a
compile error somewhere:

/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/videobuf-dma-sg.c: In function `videobuf_dma_map':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/videobuf-dma-sg.c:238: error: implicit declaration of function 'sg_dma_address'

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-mn10300/pci.h         | 9 ---------
 include/asm-mn10300/scatterlist.h | 9 +++++++++
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/include/asm-mn10300/pci.h b/include/asm-mn10300/pci.h
index 205192c52bb..cd9cc5c89ce 100644
--- a/include/asm-mn10300/pci.h
+++ b/include/asm-mn10300/pci.h
@@ -74,15 +74,6 @@ struct pci_dev;
 /* This is always fine. */
 #define pci_dac_dma_supported(pci_dev, mask)	(0)
 
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
-
 /* Return the index of the PCI controller for device. */
 static inline int pci_controller_num(struct pci_dev *dev)
 {
diff --git a/include/asm-mn10300/scatterlist.h b/include/asm-mn10300/scatterlist.h
index e29d91dbcf2..67535901b9f 100644
--- a/include/asm-mn10300/scatterlist.h
+++ b/include/asm-mn10300/scatterlist.h
@@ -43,4 +43,13 @@ struct scatterlist {
 
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
 #endif /* _ASM_SCATTERLIST_H */
-- 
cgit v1.2.3


From d50004b0867a59f8a81116f000edb352595343d9 Mon Sep 17 00:00:00 2001
From: Fernando Luis Vazquez Cao <fernando@intellilink.co.jp>
Date: Wed, 23 Jul 2008 21:28:45 -0700
Subject: cris: remove unused global_flush_tlb

global_flush_tlb is declared but never used.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-cris/cacheflush.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/asm-cris/cacheflush.h b/include/asm-cris/cacheflush.h
index 01af2de27c5..cf60e3f69f8 100644
--- a/include/asm-cris/cacheflush.h
+++ b/include/asm-cris/cacheflush.h
@@ -26,7 +26,6 @@
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
 	memcpy(dst, src, len)
 
-void global_flush_tlb(void); 
 int change_page_attr(struct page *page, int numpages, pgprot_t prot);
 
 #endif /* _CRIS_CACHEFLUSH_H */
-- 
cgit v1.2.3


From ed62f77bb631bc4a2d8acb0521b720cb55e58183 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Wed, 23 Jul 2008 21:28:46 -0700
Subject: cris: use simple_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/cris/kernel/profile.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c
index 44f7b4f7947..9aa571169bc 100644
--- a/arch/cris/kernel/profile.c
+++ b/arch/cris/kernel/profile.c
@@ -35,19 +35,16 @@ read_cris_profile(struct file *file, char __user *buf,
 		  size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
+	ssize_t ret;
 
-	if (p > SAMPLE_BUFFER_SIZE)
-		return 0;
+	ret = simple_read_from_buffer(buf, count, ppos, sample_buffer,
+						SAMPLE_BUFFER_SIZE);
+	if (ret < 0)
+		return ret;
 
-	if (p + count > SAMPLE_BUFFER_SIZE)
-		count = SAMPLE_BUFFER_SIZE - p;
-	if (copy_to_user(buf, sample_buffer + p,count))
-		return -EFAULT;
+	memset(sample_buffer + p, 0, ret);
 
-	memset(sample_buffer + p, 0, count);
-	*ppos += count;
-
-	return count;
+	return ret;
 }
 
 static ssize_t
-- 
cgit v1.2.3


From 4c182ae7810f3fe444e666f3f78c209a7c116fdf Mon Sep 17 00:00:00 2001
From: WANG Cong <xiyou.wangcong@gmail.com>
Date: Wed, 23 Jul 2008 21:28:47 -0700
Subject: arch/um/kernel/irq.c: clean up some functions

Make activate_fd() and free_irq_by_irq_and_dev() static.  Remove
init_aio_irq() since it has no users.

Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/include/irq_kern.h |  2 --
 arch/um/include/irq_user.h |  2 --
 arch/um/kernel/irq.c       | 35 ++---------------------------------
 3 files changed, 2 insertions(+), 37 deletions(-)

diff --git a/arch/um/include/irq_kern.h b/arch/um/include/irq_kern.h
index 4f775597fd5..fba3895274f 100644
--- a/arch/um/include/irq_kern.h
+++ b/arch/um/include/irq_kern.h
@@ -13,8 +13,6 @@ extern int um_request_irq(unsigned int irq, int fd, int type,
 			  irq_handler_t handler,
 			  unsigned long irqflags,  const char * devname,
 			  void *dev_id);
-extern int init_aio_irq(int irq, char *name,
-			irq_handler_t handler);
 
 #endif
 
diff --git a/arch/um/include/irq_user.h b/arch/um/include/irq_user.h
index e60b31873de..c6c784df267 100644
--- a/arch/um/include/irq_user.h
+++ b/arch/um/include/irq_user.h
@@ -21,8 +21,6 @@ struct irq_fd {
 enum { IRQ_READ, IRQ_WRITE };
 
 extern void sigio_handler(int sig, struct uml_pt_regs *regs);
-extern int activate_fd(int irq, int fd, int type, void *dev_id);
-extern void free_irq_by_irq_and_dev(unsigned int irq, void *dev_id);
 extern void free_irq_by_fd(int fd);
 extern void reactivate_fd(int fd, int irqnum);
 extern void deactivate_fd(int fd, int irqnum);
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 91587f8db34..3d7aad09b17 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -102,7 +102,7 @@ void sigio_handler(int sig, struct uml_pt_regs *regs)
 
 static DEFINE_SPINLOCK(irq_lock);
 
-int activate_fd(int irq, int fd, int type, void *dev_id)
+static int activate_fd(int irq, int fd, int type, void *dev_id)
 {
 	struct pollfd *tmp_pfd;
 	struct irq_fd *new_fd, *irq_fd;
@@ -216,7 +216,7 @@ static int same_irq_and_dev(struct irq_fd *irq, void *d)
 	return ((irq->irq == data->irq) && (irq->id == data->dev));
 }
 
-void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
+static void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
 {
 	struct irq_and_dev data = ((struct irq_and_dev) { .irq  = irq,
 							  .dev  = dev });
@@ -403,37 +403,6 @@ void __init init_IRQ(void)
 	}
 }
 
-int init_aio_irq(int irq, char *name, irq_handler_t handler)
-{
-	int fds[2], err;
-
-	err = os_pipe(fds, 1, 1);
-	if (err) {
-		printk(KERN_ERR "init_aio_irq - os_pipe failed, err = %d\n",
-		       -err);
-		goto out;
-	}
-
-	err = um_request_irq(irq, fds[0], IRQ_READ, handler,
-			     IRQF_DISABLED | IRQF_SAMPLE_RANDOM, name,
-			     (void *) (long) fds[0]);
-	if (err) {
-		printk(KERN_ERR "init_aio_irq - : um_request_irq failed, "
-		       "err = %d\n",
-		       err);
-		goto out_close;
-	}
-
-	err = fds[1];
-	goto out;
-
- out_close:
-	os_close_file(fds[0]);
-	os_close_file(fds[1]);
- out:
-	return err;
-}
-
 /*
  * IRQ stack entry and exit:
  *
-- 
cgit v1.2.3


From 4a5675820436e4ad738dd442c1cc8a165101509b Mon Sep 17 00:00:00 2001
From: WANG Cong <xiyou.wangcong@gmail.com>
Date: Wed, 23 Jul 2008 21:28:49 -0700
Subject: arch/um/kernel/mem.c: remove arch_validate()

- Remove arch_validate(), because no one uses it.

- Remove useless macro HAVE_ARCH_VALIDATE.

- Make the variable 'empty_bad_page' static.

Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/kernel/ksyms.c |  1 -
 arch/um/kernel/mem.c   | 33 +--------------------------------
 include/asm-um/page.h  |  3 ---
 3 files changed, 1 insertion(+), 36 deletions(-)

diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index ccc02a616c2..836fc9b9470 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -18,7 +18,6 @@ EXPORT_SYMBOL(get_signals);
 EXPORT_SYMBOL(kernel_thread);
 EXPORT_SYMBOL(sys_waitpid);
 EXPORT_SYMBOL(flush_tlb_range);
-EXPORT_SYMBOL(arch_validate);
 
 EXPORT_SYMBOL(high_physmem);
 EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index b0ee64622ff..e2274ef3155 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -21,7 +21,7 @@
 /* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */
 unsigned long *empty_zero_page = NULL;
 /* allocated in paging_init and unchanged thereafter */
-unsigned long *empty_bad_page = NULL;
+static unsigned long *empty_bad_page = NULL;
 
 /*
  * Initialized during boot, and readonly for initializing page tables
@@ -240,37 +240,6 @@ void __init paging_init(void)
 #endif
 }
 
-struct page *arch_validate(struct page *page, gfp_t mask, int order)
-{
-	unsigned long addr, zero = 0;
-	int i;
-
- again:
-	if (page == NULL)
-		return page;
-	if (PageHighMem(page))
-		return page;
-
-	addr = (unsigned long) page_address(page);
-	for (i = 0; i < (1 << order); i++) {
-		current->thread.fault_addr = (void *) addr;
-		if (__do_copy_to_user((void __user *) addr, &zero,
-				     sizeof(zero),
-				     &current->thread.fault_addr,
-				     &current->thread.fault_catcher)) {
-			if (!(mask & __GFP_WAIT))
-				return NULL;
-			else break;
-		}
-		addr += PAGE_SIZE;
-	}
-
-	if (i == (1 << order))
-		return page;
-	page = alloc_pages(mask, order);
-	goto again;
-}
-
 /*
  * This can't do anything because nothing in the kernel image can be freed
  * since it's not in kernel physical memory.
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index 335c57383c0..a6df1f13d73 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -115,9 +115,6 @@ extern unsigned long uml_physmem;
 #define pfn_valid(pfn) ((pfn) < max_mapnr)
 #define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
 
-extern struct page *arch_validate(struct page *page, gfp_t mask, int order);
-#define HAVE_ARCH_VALIDATE
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/page.h>
 
-- 
cgit v1.2.3


From 99764fa4ceeecba8b9e0a8a5565b418a2e94f83b Mon Sep 17 00:00:00 2001
From: WANG Cong <xiyou.wangcong@gmail.com>
Date: Wed, 23 Jul 2008 21:28:49 -0700
Subject: UML: make several more things static

- Make some variables and functions static, since they don't need to be
  global.

- Remove an unused function - arch/um/kernel/time.c::sched_clock().

- Clean the style a bit as complained by checkpatch.pl.

Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/include/skas/skas.h     | 1 -
 arch/um/include/um_uaccess.h    | 1 -
 arch/um/kernel/physmem.c        | 2 +-
 arch/um/kernel/ptrace.c         | 2 +-
 arch/um/kernel/time.c           | 8 --------
 arch/um/kernel/uaccess.c        | 2 +-
 arch/um/os-Linux/sigio.c        | 2 +-
 arch/um/os-Linux/signal.c       | 2 +-
 arch/um/os-Linux/skas/process.c | 2 +-
 arch/um/os-Linux/umid.c         | 2 +-
 arch/um/sys-i386/bugs.c         | 2 +-
 arch/um/sys-i386/checksum.S     | 5 ++---
 arch/um/sys-i386/ldt.c          | 4 ++--
 include/asm-um/ptrace-generic.h | 3 ---
 14 files changed, 12 insertions(+), 26 deletions(-)

diff --git a/arch/um/include/skas/skas.h b/arch/um/include/skas/skas.h
index b073f8a86bd..64d2c744330 100644
--- a/arch/um/include/skas/skas.h
+++ b/arch/um/include/skas/skas.h
@@ -16,7 +16,6 @@ extern int user_thread(unsigned long stack, int flags);
 extern void new_thread_handler(void);
 extern void handle_syscall(struct uml_pt_regs *regs);
 extern int new_mm(unsigned long stack);
-extern void get_skas_faultinfo(int pid, struct faultinfo * fi);
 extern long execute_syscall_skas(void *r);
 extern unsigned long current_stub_stack(void);
 
diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h
index 2b6fc8e0f07..45c04999d67 100644
--- a/arch/um/include/um_uaccess.h
+++ b/arch/um/include/um_uaccess.h
@@ -34,7 +34,6 @@ extern int copy_to_user(void __user *to, const void *from, int n);
 
 extern int __do_copy_to_user(void *to, const void *from, int n,
 			     void **fault_addr, jmp_buf **fault_catcher);
-extern void __do_copy(void *to, const void *from, int n);
 
 /*
  * strncpy_from_user: - Copy a NUL terminated string from userspace.
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 9757085a022..a1a9090254c 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -185,7 +185,7 @@ unsigned long find_iomem(char *driver, unsigned long *len_out)
 	return 0;
 }
 
-int setup_iomem(void)
+static int setup_iomem(void)
 {
 	struct iomem_region *region = iomem_regions;
 	unsigned long iomem_start = high_physmem + PAGE_SIZE;
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 47b57b497d5..15e8b7c4de1 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -225,7 +225,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
+static void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
 		  int error_code)
 {
 	struct siginfo info;
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index c3e2f369c33..47f04f4a346 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -13,14 +13,6 @@
 #include "kern_util.h"
 #include "os.h"
 
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-	return (unsigned long long)jiffies_64 * (NSEC_PER_SEC / HZ);
-}
-
 void timer_handler(int sig, struct uml_pt_regs *regs)
 {
 	unsigned long flags;
diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c
index f0f4b040d7c..dd33f040c52 100644
--- a/arch/um/kernel/uaccess.c
+++ b/arch/um/kernel/uaccess.c
@@ -12,7 +12,7 @@
 #include <linux/string.h>
 #include "os.h"
 
-void __do_copy(void *to, const void *from, int n)
+static void __do_copy(void *to, const void *from, int n)
 {
 	memcpy(to, from, n);
 }
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index eb8f2e4be19..63d299df152 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -530,7 +530,7 @@ static void tty_close(int master, int slave)
 		printk(UM_KERN_CONT "No, enabling workaround\n");
 }
 
-void __init check_sigio(void)
+static void __init check_sigio(void)
 {
 	if ((access("/dev/ptmx", R_OK) < 0) &&
 	    (access("/dev/ptyp0", R_OK) < 0)) {
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 5aade6027e4..6ae180703a6 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -126,7 +126,7 @@ void set_sigstack(void *sig_stack, int size)
 		panic("enabling signal stack failed, errno = %d\n", errno);
 }
 
-void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
+static void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
 
 void handle_signal(int sig, struct sigcontext *sc)
 {
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 172ad8f72e1..d6e0a2234b8 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -96,7 +96,7 @@ bad_wait:
 
 extern unsigned long current_stub_stack(void);
 
-void get_skas_faultinfo(int pid, struct faultinfo * fi)
+static void get_skas_faultinfo(int pid, struct faultinfo *fi)
 {
 	int err;
 
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index 106fa864155..a27defb8188 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -245,7 +245,7 @@ int __init set_umid(char *name)
 /* Changed in make_umid, which is called during early boot */
 static int umid_setup = 0;
 
-int __init make_umid(void)
+static int __init make_umid(void)
 {
 	int fd, err;
 	char tmp[256];
diff --git a/arch/um/sys-i386/bugs.c b/arch/um/sys-i386/bugs.c
index a74442d1376..2c6d0d731c1 100644
--- a/arch/um/sys-i386/bugs.c
+++ b/arch/um/sys-i386/bugs.c
@@ -12,7 +12,7 @@
 #include "sysdep/ptrace.h"
 
 /* Set during early boot */
-int host_has_cmov = 1;
+static int host_has_cmov = 1;
 static jmp_buf cmov_test_return;
 
 static void cmov_sigill_test_handler(int sig)
diff --git a/arch/um/sys-i386/checksum.S b/arch/um/sys-i386/checksum.S
index 62c7e564f22..f058d2f82e1 100644
--- a/arch/um/sys-i386/checksum.S
+++ b/arch/um/sys-i386/checksum.S
@@ -243,13 +243,12 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst,
 	.previous
 
 .align 4
-.globl csum_partial_copy_generic_i386
-				
+
 #ifndef CONFIG_X86_USE_PPRO_CHECKSUM
 
 #define ARGBASE 16		
 #define FP		12
-		
+
 csum_partial_copy_generic_i386:
 	subl  $4,%esp	
 	pushl %edi
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index a34263e6b08..a4846a84a7b 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -14,8 +14,8 @@
 
 extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
 
-long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
-		     void **addr, int done)
+static long write_ldt_entry(struct mm_id *mm_idp, int func,
+		     struct user_desc *desc, void **addr, int done)
 {
 	long res;
 
diff --git a/include/asm-um/ptrace-generic.h b/include/asm-um/ptrace-generic.h
index 6aefcd32fc6..315749705ea 100644
--- a/include/asm-um/ptrace-generic.h
+++ b/include/asm-um/ptrace-generic.h
@@ -47,9 +47,6 @@ extern int set_fpregs(struct user_i387_struct __user *buf,
 
 extern void show_regs(struct pt_regs *regs);
 
-extern void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
-			 int error_code);
-
 extern int arch_copy_tls(struct task_struct *new);
 extern void clear_flushed_tls(struct task_struct *task);
 
-- 
cgit v1.2.3


From f606ddf42fd4edc558eeb48bfee66d2c591571d2 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:28:50 -0700
Subject: remove the v850 port

Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.

There also seems to be noone willing to bring this port back into a usable
state.

This patch therefore removes the v850 port.

If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS                            |    3 -
 arch/v850/Kconfig                      |  353 ----------
 arch/v850/Kconfig.debug                |   10 -
 arch/v850/Makefile                     |   54 --
 arch/v850/README                       |   44 --
 arch/v850/configs/rte-ma1-cb_defconfig |  617 ------------------
 arch/v850/configs/rte-me2-cb_defconfig |  462 -------------
 arch/v850/configs/sim_defconfig        |  451 -------------
 arch/v850/kernel/Makefile              |   40 --
 arch/v850/kernel/anna-rom.ld           |   16 -
 arch/v850/kernel/anna.c                |  202 ------
 arch/v850/kernel/anna.ld               |   20 -
 arch/v850/kernel/as85ep1-rom.ld        |   21 -
 arch/v850/kernel/as85ep1.c             |  234 -------
 arch/v850/kernel/as85ep1.ld            |   49 --
 arch/v850/kernel/asm-offsets.c         |   58 --
 arch/v850/kernel/bug.c                 |  142 ----
 arch/v850/kernel/entry.S               | 1121 --------------------------------
 arch/v850/kernel/fpga85e2c.c           |  167 -----
 arch/v850/kernel/fpga85e2c.ld          |   62 --
 arch/v850/kernel/gbus_int.c            |  271 --------
 arch/v850/kernel/head.S                |  128 ----
 arch/v850/kernel/highres_timer.c       |  132 ----
 arch/v850/kernel/init_task.c           |   48 --
 arch/v850/kernel/intv.S                |   87 ---
 arch/v850/kernel/irq.c                 |  123 ----
 arch/v850/kernel/ma.c                  |   69 --
 arch/v850/kernel/mach.c                |   17 -
 arch/v850/kernel/mach.h                |   56 --
 arch/v850/kernel/me2.c                 |   73 ---
 arch/v850/kernel/memcons.c             |  135 ----
 arch/v850/kernel/module.c              |  237 -------
 arch/v850/kernel/process.c             |  217 -------
 arch/v850/kernel/procfs.c              |   67 --
 arch/v850/kernel/ptrace.c              |  235 -------
 arch/v850/kernel/rte_cb.c              |  193 ------
 arch/v850/kernel/rte_cb_leds.c         |  137 ----
 arch/v850/kernel/rte_cb_multi.c        |  121 ----
 arch/v850/kernel/rte_ma1_cb-rom.ld     |   14 -
 arch/v850/kernel/rte_ma1_cb.c          |  107 ---
 arch/v850/kernel/rte_ma1_cb.ld         |   57 --
 arch/v850/kernel/rte_mb_a_pci.c        |  819 -----------------------
 arch/v850/kernel/rte_me2_cb.c          |  298 ---------
 arch/v850/kernel/rte_me2_cb.ld         |   30 -
 arch/v850/kernel/rte_nb85e_cb-multi.ld |   57 --
 arch/v850/kernel/rte_nb85e_cb.c        |   81 ---
 arch/v850/kernel/rte_nb85e_cb.ld       |   22 -
 arch/v850/kernel/setup.c               |  329 ----------
 arch/v850/kernel/signal.c              |  523 ---------------
 arch/v850/kernel/sim.c                 |  172 -----
 arch/v850/kernel/sim.ld                |   13 -
 arch/v850/kernel/sim85e2.c             |  195 ------
 arch/v850/kernel/sim85e2.ld            |   36 -
 arch/v850/kernel/simcons.c             |  161 -----
 arch/v850/kernel/syscalls.c            |  196 ------
 arch/v850/kernel/teg.c                 |   62 --
 arch/v850/kernel/time.c                |  106 ---
 arch/v850/kernel/v850_ksyms.c          |   51 --
 arch/v850/kernel/v850e2_cache.c        |  127 ----
 arch/v850/kernel/v850e_cache.c         |  174 -----
 arch/v850/kernel/v850e_intc.c          |  104 ---
 arch/v850/kernel/v850e_timer_d.c       |   54 --
 arch/v850/kernel/v850e_utils.c         |   62 --
 arch/v850/kernel/vmlinux.lds.S         |  306 ---------
 arch/v850/lib/Makefile                 |    6 -
 arch/v850/lib/ashldi3.c                |   62 --
 arch/v850/lib/ashrdi3.c                |   63 --
 arch/v850/lib/checksum.c               |  155 -----
 arch/v850/lib/lshrdi3.c                |   62 --
 arch/v850/lib/memcpy.c                 |   92 ---
 arch/v850/lib/memset.c                 |   68 --
 arch/v850/lib/muldi3.c                 |   61 --
 arch/v850/lib/negdi2.c                 |   25 -
 drivers/serial/Kconfig                 |   16 -
 drivers/watchdog/Kconfig               |    2 -
 drivers/watchdog/Makefile              |    2 -
 include/asm-v850/Kbuild                |    1 -
 include/asm-v850/a.out.h               |   21 -
 include/asm-v850/anna.h                |  137 ----
 include/asm-v850/as85ep1.h             |  152 -----
 include/asm-v850/asm.h                 |   32 -
 include/asm-v850/atomic.h              |  131 ----
 include/asm-v850/auxvec.h              |    4 -
 include/asm-v850/bitops.h              |  161 -----
 include/asm-v850/bug.h                 |   25 -
 include/asm-v850/bugs.h                |   16 -
 include/asm-v850/byteorder.h           |   48 --
 include/asm-v850/cache.h               |   26 -
 include/asm-v850/cacheflush.h          |   70 --
 include/asm-v850/checksum.h            |  112 ----
 include/asm-v850/clinkage.h            |   26 -
 include/asm-v850/cputime.h             |    6 -
 include/asm-v850/current.h             |   47 --
 include/asm-v850/delay.h               |   47 --
 include/asm-v850/device.h              |    7 -
 include/asm-v850/div64.h               |    1 -
 include/asm-v850/dma-mapping.h         |   11 -
 include/asm-v850/dma.h                 |   18 -
 include/asm-v850/elf.h                 |   99 ---
 include/asm-v850/emergency-restart.h   |    6 -
 include/asm-v850/entry.h               |  113 ----
 include/asm-v850/errno.h               |    6 -
 include/asm-v850/fb.h                  |   12 -
 include/asm-v850/fcntl.h               |   11 -
 include/asm-v850/flat.h                |  133 ----
 include/asm-v850/fpga85e2c.h           |   82 ---
 include/asm-v850/futex.h               |    6 -
 include/asm-v850/gbus_int.h            |   97 ---
 include/asm-v850/hardirq.h             |   28 -
 include/asm-v850/highres_timer.h       |   44 --
 include/asm-v850/hw_irq.h              |    4 -
 include/asm-v850/io.h                  |  142 ----
 include/asm-v850/ioctl.h               |    1 -
 include/asm-v850/ioctls.h              |   84 ---
 include/asm-v850/ipcbuf.h              |   29 -
 include/asm-v850/irq.h                 |   55 --
 include/asm-v850/irq_regs.h            |    1 -
 include/asm-v850/kdebug.h              |    1 -
 include/asm-v850/kmap_types.h          |   19 -
 include/asm-v850/kvm.h                 |    6 -
 include/asm-v850/linkage.h             |    8 -
 include/asm-v850/local.h               |    6 -
 include/asm-v850/ma.h                  |  101 ---
 include/asm-v850/ma1.h                 |   50 --
 include/asm-v850/machdep.h             |   60 --
 include/asm-v850/macrology.h           |   17 -
 include/asm-v850/me2.h                 |  182 ------
 include/asm-v850/mman.h                |   15 -
 include/asm-v850/mmu.h                 |   11 -
 include/asm-v850/mmu_context.h         |   13 -
 include/asm-v850/module.h              |   62 --
 include/asm-v850/msgbuf.h              |   31 -
 include/asm-v850/mutex.h               |    9 -
 include/asm-v850/page.h                |  124 ----
 include/asm-v850/param.h               |   33 -
 include/asm-v850/pci.h                 |  119 ----
 include/asm-v850/percpu.h              |   14 -
 include/asm-v850/pgalloc.h             |   22 -
 include/asm-v850/pgtable.h             |   59 --
 include/asm-v850/poll.h                |    9 -
 include/asm-v850/posix_types.h         |   72 --
 include/asm-v850/processor.h           |  120 ----
 include/asm-v850/ptrace.h              |  121 ----
 include/asm-v850/resource.h            |    6 -
 include/asm-v850/rte_cb.h              |   78 ---
 include/asm-v850/rte_ma1_cb.h          |  128 ----
 include/asm-v850/rte_mb_a_pci.h        |   56 --
 include/asm-v850/rte_me2_cb.h          |  202 ------
 include/asm-v850/rte_nb85e_cb.h        |  111 ----
 include/asm-v850/scatterlist.h         |   31 -
 include/asm-v850/sections.h            |    6 -
 include/asm-v850/segment.h             |   36 -
 include/asm-v850/semaphore.h           |    1 -
 include/asm-v850/sembuf.h              |   25 -
 include/asm-v850/serial.h              |   56 --
 include/asm-v850/setup.h               |    6 -
 include/asm-v850/shmbuf.h              |   42 --
 include/asm-v850/shmparam.h            |    6 -
 include/asm-v850/sigcontext.h          |   25 -
 include/asm-v850/siginfo.h             |    6 -
 include/asm-v850/signal.h              |  168 -----
 include/asm-v850/sim.h                 |   47 --
 include/asm-v850/sim85e2.h             |   69 --
 include/asm-v850/sim85e2c.h            |   26 -
 include/asm-v850/sim85e2s.h            |   28 -
 include/asm-v850/simsyscall.h          |   99 ---
 include/asm-v850/socket.h              |   57 --
 include/asm-v850/sockios.h             |   13 -
 include/asm-v850/stat.h                |   73 ---
 include/asm-v850/statfs.h              |    6 -
 include/asm-v850/string.h              |   25 -
 include/asm-v850/system.h              |  123 ----
 include/asm-v850/teg.h                 |  101 ---
 include/asm-v850/termbits.h            |  200 ------
 include/asm-v850/termios.h             |   90 ---
 include/asm-v850/thread_info.h         |  129 ----
 include/asm-v850/timex.h               |   18 -
 include/asm-v850/tlb.h                 |   21 -
 include/asm-v850/tlbflush.h            |   64 --
 include/asm-v850/topology.h            |    6 -
 include/asm-v850/types.h               |   36 -
 include/asm-v850/uaccess.h             |  159 -----
 include/asm-v850/ucontext.h            |   14 -
 include/asm-v850/unaligned.h           |   22 -
 include/asm-v850/unistd.h              |  244 -------
 include/asm-v850/user.h                |   52 --
 include/asm-v850/v850e.h               |   21 -
 include/asm-v850/v850e2.h              |   69 --
 include/asm-v850/v850e2_cache.h        |   75 ---
 include/asm-v850/v850e_cache.h         |   48 --
 include/asm-v850/v850e_intc.h          |  133 ----
 include/asm-v850/v850e_timer_c.h       |   48 --
 include/asm-v850/v850e_timer_d.h       |   62 --
 include/asm-v850/v850e_uart.h          |   76 ---
 include/asm-v850/v850e_uarta.h         |  278 --------
 include/asm-v850/v850e_uartb.h         |  262 --------
 include/asm-v850/v850e_utils.h         |   35 -
 include/linux/audit.h                  |    1 -
 include/linux/module.h                 |    2 +-
 include/linux/serial_core.h            |    3 -
 include/linux/syscalls.h               |    2 +-
 scripts/genksyms/genksyms.c            |    3 +-
 scripts/mod/file2alias.c               |    2 +-
 scripts/mod/mk_elfconfig.c             |    2 +-
 204 files changed, 5 insertions(+), 18406 deletions(-)
 delete mode 100644 arch/v850/Kconfig
 delete mode 100644 arch/v850/Kconfig.debug
 delete mode 100644 arch/v850/Makefile
 delete mode 100644 arch/v850/README
 delete mode 100644 arch/v850/configs/rte-ma1-cb_defconfig
 delete mode 100644 arch/v850/configs/rte-me2-cb_defconfig
 delete mode 100644 arch/v850/configs/sim_defconfig
 delete mode 100644 arch/v850/kernel/Makefile
 delete mode 100644 arch/v850/kernel/anna-rom.ld
 delete mode 100644 arch/v850/kernel/anna.c
 delete mode 100644 arch/v850/kernel/anna.ld
 delete mode 100644 arch/v850/kernel/as85ep1-rom.ld
 delete mode 100644 arch/v850/kernel/as85ep1.c
 delete mode 100644 arch/v850/kernel/as85ep1.ld
 delete mode 100644 arch/v850/kernel/asm-offsets.c
 delete mode 100644 arch/v850/kernel/bug.c
 delete mode 100644 arch/v850/kernel/entry.S
 delete mode 100644 arch/v850/kernel/fpga85e2c.c
 delete mode 100644 arch/v850/kernel/fpga85e2c.ld
 delete mode 100644 arch/v850/kernel/gbus_int.c
 delete mode 100644 arch/v850/kernel/head.S
 delete mode 100644 arch/v850/kernel/highres_timer.c
 delete mode 100644 arch/v850/kernel/init_task.c
 delete mode 100644 arch/v850/kernel/intv.S
 delete mode 100644 arch/v850/kernel/irq.c
 delete mode 100644 arch/v850/kernel/ma.c
 delete mode 100644 arch/v850/kernel/mach.c
 delete mode 100644 arch/v850/kernel/mach.h
 delete mode 100644 arch/v850/kernel/me2.c
 delete mode 100644 arch/v850/kernel/memcons.c
 delete mode 100644 arch/v850/kernel/module.c
 delete mode 100644 arch/v850/kernel/process.c
 delete mode 100644 arch/v850/kernel/procfs.c
 delete mode 100644 arch/v850/kernel/ptrace.c
 delete mode 100644 arch/v850/kernel/rte_cb.c
 delete mode 100644 arch/v850/kernel/rte_cb_leds.c
 delete mode 100644 arch/v850/kernel/rte_cb_multi.c
 delete mode 100644 arch/v850/kernel/rte_ma1_cb-rom.ld
 delete mode 100644 arch/v850/kernel/rte_ma1_cb.c
 delete mode 100644 arch/v850/kernel/rte_ma1_cb.ld
 delete mode 100644 arch/v850/kernel/rte_mb_a_pci.c
 delete mode 100644 arch/v850/kernel/rte_me2_cb.c
 delete mode 100644 arch/v850/kernel/rte_me2_cb.ld
 delete mode 100644 arch/v850/kernel/rte_nb85e_cb-multi.ld
 delete mode 100644 arch/v850/kernel/rte_nb85e_cb.c
 delete mode 100644 arch/v850/kernel/rte_nb85e_cb.ld
 delete mode 100644 arch/v850/kernel/setup.c
 delete mode 100644 arch/v850/kernel/signal.c
 delete mode 100644 arch/v850/kernel/sim.c
 delete mode 100644 arch/v850/kernel/sim.ld
 delete mode 100644 arch/v850/kernel/sim85e2.c
 delete mode 100644 arch/v850/kernel/sim85e2.ld
 delete mode 100644 arch/v850/kernel/simcons.c
 delete mode 100644 arch/v850/kernel/syscalls.c
 delete mode 100644 arch/v850/kernel/teg.c
 delete mode 100644 arch/v850/kernel/time.c
 delete mode 100644 arch/v850/kernel/v850_ksyms.c
 delete mode 100644 arch/v850/kernel/v850e2_cache.c
 delete mode 100644 arch/v850/kernel/v850e_cache.c
 delete mode 100644 arch/v850/kernel/v850e_intc.c
 delete mode 100644 arch/v850/kernel/v850e_timer_d.c
 delete mode 100644 arch/v850/kernel/v850e_utils.c
 delete mode 100644 arch/v850/kernel/vmlinux.lds.S
 delete mode 100644 arch/v850/lib/Makefile
 delete mode 100644 arch/v850/lib/ashldi3.c
 delete mode 100644 arch/v850/lib/ashrdi3.c
 delete mode 100644 arch/v850/lib/checksum.c
 delete mode 100644 arch/v850/lib/lshrdi3.c
 delete mode 100644 arch/v850/lib/memcpy.c
 delete mode 100644 arch/v850/lib/memset.c
 delete mode 100644 arch/v850/lib/muldi3.c
 delete mode 100644 arch/v850/lib/negdi2.c
 delete mode 100644 include/asm-v850/Kbuild
 delete mode 100644 include/asm-v850/a.out.h
 delete mode 100644 include/asm-v850/anna.h
 delete mode 100644 include/asm-v850/as85ep1.h
 delete mode 100644 include/asm-v850/asm.h
 delete mode 100644 include/asm-v850/atomic.h
 delete mode 100644 include/asm-v850/auxvec.h
 delete mode 100644 include/asm-v850/bitops.h
 delete mode 100644 include/asm-v850/bug.h
 delete mode 100644 include/asm-v850/bugs.h
 delete mode 100644 include/asm-v850/byteorder.h
 delete mode 100644 include/asm-v850/cache.h
 delete mode 100644 include/asm-v850/cacheflush.h
 delete mode 100644 include/asm-v850/checksum.h
 delete mode 100644 include/asm-v850/clinkage.h
 delete mode 100644 include/asm-v850/cputime.h
 delete mode 100644 include/asm-v850/current.h
 delete mode 100644 include/asm-v850/delay.h
 delete mode 100644 include/asm-v850/device.h
 delete mode 100644 include/asm-v850/div64.h
 delete mode 100644 include/asm-v850/dma-mapping.h
 delete mode 100644 include/asm-v850/dma.h
 delete mode 100644 include/asm-v850/elf.h
 delete mode 100644 include/asm-v850/emergency-restart.h
 delete mode 100644 include/asm-v850/entry.h
 delete mode 100644 include/asm-v850/errno.h
 delete mode 100644 include/asm-v850/fb.h
 delete mode 100644 include/asm-v850/fcntl.h
 delete mode 100644 include/asm-v850/flat.h
 delete mode 100644 include/asm-v850/fpga85e2c.h
 delete mode 100644 include/asm-v850/futex.h
 delete mode 100644 include/asm-v850/gbus_int.h
 delete mode 100644 include/asm-v850/hardirq.h
 delete mode 100644 include/asm-v850/highres_timer.h
 delete mode 100644 include/asm-v850/hw_irq.h
 delete mode 100644 include/asm-v850/io.h
 delete mode 100644 include/asm-v850/ioctl.h
 delete mode 100644 include/asm-v850/ioctls.h
 delete mode 100644 include/asm-v850/ipcbuf.h
 delete mode 100644 include/asm-v850/irq.h
 delete mode 100644 include/asm-v850/irq_regs.h
 delete mode 100644 include/asm-v850/kdebug.h
 delete mode 100644 include/asm-v850/kmap_types.h
 delete mode 100644 include/asm-v850/kvm.h
 delete mode 100644 include/asm-v850/linkage.h
 delete mode 100644 include/asm-v850/local.h
 delete mode 100644 include/asm-v850/ma.h
 delete mode 100644 include/asm-v850/ma1.h
 delete mode 100644 include/asm-v850/machdep.h
 delete mode 100644 include/asm-v850/macrology.h
 delete mode 100644 include/asm-v850/me2.h
 delete mode 100644 include/asm-v850/mman.h
 delete mode 100644 include/asm-v850/mmu.h
 delete mode 100644 include/asm-v850/mmu_context.h
 delete mode 100644 include/asm-v850/module.h
 delete mode 100644 include/asm-v850/msgbuf.h
 delete mode 100644 include/asm-v850/mutex.h
 delete mode 100644 include/asm-v850/page.h
 delete mode 100644 include/asm-v850/param.h
 delete mode 100644 include/asm-v850/pci.h
 delete mode 100644 include/asm-v850/percpu.h
 delete mode 100644 include/asm-v850/pgalloc.h
 delete mode 100644 include/asm-v850/pgtable.h
 delete mode 100644 include/asm-v850/poll.h
 delete mode 100644 include/asm-v850/posix_types.h
 delete mode 100644 include/asm-v850/processor.h
 delete mode 100644 include/asm-v850/ptrace.h
 delete mode 100644 include/asm-v850/resource.h
 delete mode 100644 include/asm-v850/rte_cb.h
 delete mode 100644 include/asm-v850/rte_ma1_cb.h
 delete mode 100644 include/asm-v850/rte_mb_a_pci.h
 delete mode 100644 include/asm-v850/rte_me2_cb.h
 delete mode 100644 include/asm-v850/rte_nb85e_cb.h
 delete mode 100644 include/asm-v850/scatterlist.h
 delete mode 100644 include/asm-v850/sections.h
 delete mode 100644 include/asm-v850/segment.h
 delete mode 100644 include/asm-v850/semaphore.h
 delete mode 100644 include/asm-v850/sembuf.h
 delete mode 100644 include/asm-v850/serial.h
 delete mode 100644 include/asm-v850/setup.h
 delete mode 100644 include/asm-v850/shmbuf.h
 delete mode 100644 include/asm-v850/shmparam.h
 delete mode 100644 include/asm-v850/sigcontext.h
 delete mode 100644 include/asm-v850/siginfo.h
 delete mode 100644 include/asm-v850/signal.h
 delete mode 100644 include/asm-v850/sim.h
 delete mode 100644 include/asm-v850/sim85e2.h
 delete mode 100644 include/asm-v850/sim85e2c.h
 delete mode 100644 include/asm-v850/sim85e2s.h
 delete mode 100644 include/asm-v850/simsyscall.h
 delete mode 100644 include/asm-v850/socket.h
 delete mode 100644 include/asm-v850/sockios.h
 delete mode 100644 include/asm-v850/stat.h
 delete mode 100644 include/asm-v850/statfs.h
 delete mode 100644 include/asm-v850/string.h
 delete mode 100644 include/asm-v850/system.h
 delete mode 100644 include/asm-v850/teg.h
 delete mode 100644 include/asm-v850/termbits.h
 delete mode 100644 include/asm-v850/termios.h
 delete mode 100644 include/asm-v850/thread_info.h
 delete mode 100644 include/asm-v850/timex.h
 delete mode 100644 include/asm-v850/tlb.h
 delete mode 100644 include/asm-v850/tlbflush.h
 delete mode 100644 include/asm-v850/topology.h
 delete mode 100644 include/asm-v850/types.h
 delete mode 100644 include/asm-v850/uaccess.h
 delete mode 100644 include/asm-v850/ucontext.h
 delete mode 100644 include/asm-v850/unaligned.h
 delete mode 100644 include/asm-v850/unistd.h
 delete mode 100644 include/asm-v850/user.h
 delete mode 100644 include/asm-v850/v850e.h
 delete mode 100644 include/asm-v850/v850e2.h
 delete mode 100644 include/asm-v850/v850e2_cache.h
 delete mode 100644 include/asm-v850/v850e_cache.h
 delete mode 100644 include/asm-v850/v850e_intc.h
 delete mode 100644 include/asm-v850/v850e_timer_c.h
 delete mode 100644 include/asm-v850/v850e_timer_d.h
 delete mode 100644 include/asm-v850/v850e_uart.h
 delete mode 100644 include/asm-v850/v850e_uarta.h
 delete mode 100644 include/asm-v850/v850e_uartb.h
 delete mode 100644 include/asm-v850/v850e_utils.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 7ffd78c4e27..7e5c7b0290b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4131,9 +4131,6 @@ W:	http://www.uclinux.org/
 L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained
 
-UCLINUX FOR NEC V850
-P:	Miles Bader
-
 UCLINUX FOR RENESAS H8/300
 P:	Yoshinori Sato
 M:	ysato@users.sourceforge.jp
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
deleted file mode 100644
index 4379f43505e..00000000000
--- a/arch/v850/Kconfig
+++ /dev/null
@@ -1,353 +0,0 @@
-#############################################################################
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-#############################################################################
-
-mainmenu "uClinux/v850 (w/o MMU) Kernel Configuration"
-
-config MMU
-       	bool
-	default n
-config ZONE_DMA
-	bool
-	default y
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-config GENERIC_HWEIGHT
-	bool
-	default y
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config GENERIC_TIME
-	bool
-	default y
-
-config TIME_LOW_RES
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
-# Turn off some random 386 crap that can affect device config
-config ISA
-	bool
-	default n
-config ISAPNP
-	bool
-	default n
-config EISA
-	bool
-	default n
-config MCA
-	bool
-	default n
-
-
-#############################################################################
-#### v850-specific config
-
-# Define the architecture
-config V850
-	bool
-	default y
-	select HAVE_IDE
-
-menu "Processor type and features"
-
-   choice
-	  prompt "Platform"
-	  default GDB
-      config V850E_SIM
-      	     bool "GDB"
-      config RTE_CB_MA1
-      	     bool "RTE-V850E/MA1-CB"
-      config RTE_CB_NB85E
-      	     bool "RTE-V850E/NB85E-CB"
-      config RTE_CB_ME2
-      	     bool "RTE-V850E/ME2-CB"
-      config V850E_AS85EP1
-      	     bool "AS85EP1"
-      config V850E2_SIM85E2C
-      	     bool "sim85e2c"
-      config V850E2_SIM85E2S
-      	     bool "sim85e2s"
-      config V850E2_FPGA85E2C
-      	     bool "NA85E2C-FPGA"
-      config V850E2_ANNA
-      	     bool "Anna"
-   endchoice
-
-   #### V850E processor-specific config
-
-   # All CPUs currently supported use the v850e architecture
-   config V850E
-   	  bool
-	  default y
-
-   # The RTE-V850E/MA1-CB is the only type of V850E/MA1 platform we
-   # currently support
-   config V850E_MA1
-   	  bool
-	  depends on RTE_CB_MA1
-	  default y
-   # Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
-   config V850E_TEG
-   	  bool
-	  depends on RTE_CB_NB85E
-	  default y
-   # ... and the RTE-V850E/ME2-CB - V850E/ME2
-   config V850E_ME2
-   	  bool
-	  depends on RTE_CB_ME2
-	  default y
-
-
-   #### sim85e2-specific config
-
-   config V850E2_SIM85E2
-   	  bool
-	  depends on V850E2_SIM85E2C || V850E2_SIM85E2S
-	  default y
-
-
-   #### V850E2 processor-specific config
-
-   # V850E2 processors
-   config V850E2
-   	  bool
-	  depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
-	  default y
-
-
-   #### RTE-CB platform-specific config
-
-   # Boards in the RTE-x-CB series
-   config RTE_CB
-   	  bool
-	  depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
-	  default y
-
-   config RTE_CB_MULTI
-   	  bool
-	  # RTE_CB_NB85E can either have multi ROM support or not, but
-	  # other platforms (currently only RTE_CB_MA1) require it.
-	  prompt "Multi monitor ROM support" if RTE_CB_NB85E
-	  depends on RTE_CB_MA1 || RTE_CB_NB85E
-	  default y
-
-   config RTE_CB_MULTI_DBTRAP
-   	  bool "Pass illegal insn trap / dbtrap to kernel"
-	  depends on RTE_CB_MULTI
-	  default n
-
-   config RTE_CB_MA1_KSRAM
-   	  bool "Kernel in SRAM (limits size of kernel)"
-	  depends on RTE_CB_MA1 && RTE_CB_MULTI
-	  default n
-
-   config RTE_MB_A_PCI
-   	  bool "Mother-A PCI support"
-	  depends on RTE_CB
-	  default y
-
-   # The GBUS is used to talk to the RTE-MOTHER-A board
-   config RTE_GBUS_INT
-   	  bool
-	  depends on RTE_MB_A_PCI
-	  default y
-
-   # The only PCI bus we support is on the RTE-MOTHER-A board
-   config PCI
-   	  bool
-	  default RTE_MB_A_PCI
-
-   #### Some feature-specific configs
-
-   # Everything except for the GDB simulator uses the same interrupt controller
-   config V850E_INTC
-   	  bool
-	  default !V850E_SIM
-
-   # Everything except for the various simulators uses the "Timer D" unit
-   config V850E_TIMER_D
-   	  bool
-	  default !V850E_SIM && !V850E2_SIM85E2
-
-   # Cache control used on some v850e1 processors
-   config V850E_CACHE
-          bool
-	  default V850E_TEG || V850E_ME2
-
-   # Cache control used on v850e2 processors; I think this should
-   # actually apply to more, but currently only the SIM85E2S uses it
-   config V850E2_CACHE
-   	  bool
-	  default V850E2_SIM85E2S
-
-   config NO_CACHE
-   	  bool
-	  default !V850E_CACHE && !V850E2_CACHE
-
-   # HZ depends on the platform
-   config HZ
-	  int
-	  default 24  if V850E_SIM || V850E2_SIM85E2
-	  default 122 if V850E2_FPGA85E2C
-	  default 100
-
-   #### Misc config
-
-   config ROM_KERNEL
-   	  bool "Kernel in ROM"
-	  depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
-
-   # Some platforms pre-zero memory, in which case the kernel doesn't need to
-   config ZERO_BSS
-   	  bool
-	  depends on !V850E2_SIM85E2C
-	  default y
-
-   # The crappy-ass zone allocator requires that the start of allocatable
-   # memory be aligned to the largest possible allocation.
-   config FORCE_MAX_ZONEORDER
-   	  int
-	  default 8 if V850E2_SIM85E2C || V850E2_FPGA85E2C
-
-   config V850E_HIGHRES_TIMER
-   	  bool "High resolution timer support"
-	  depends on V850E_TIMER_D
-   config TIME_BOOTUP
-   	  bool "Time bootup"
-	  depends on V850E_HIGHRES_TIMER
-
-   config RESET_GUARD
-   	  bool "Reset Guard"
-
-source "mm/Kconfig"
-
-endmenu
-
-
-#############################################################################
-
-source init/Kconfig
-
-#############################################################################
-
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-#    config PCI
-# 	   bool "PCI support"
-# 	   help
-# 	     Support for PCI bus.
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-#############################################################################
-
-source "drivers/base/Kconfig"
-
-source drivers/mtd/Kconfig
-
-source drivers/parport/Kconfig
-
-#source drivers/pnp/Kconfig
-
-source drivers/block/Kconfig
-
-#############################################################################
-
-menu "Disk device support"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-endmenu
-
-#############################################################################
-
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-#source "drivers/telephony/Kconfig"
-
-#
-# input before char - char/joystick depends on it. As does USB.
-#
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-#source drivers/misc/Config.in
-source "drivers/media/Kconfig"
-
-source "fs/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "arch/v850/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-#############################################################################
diff --git a/arch/v850/Kconfig.debug b/arch/v850/Kconfig.debug
deleted file mode 100644
index 4acfb9cca1c..00000000000
--- a/arch/v850/Kconfig.debug
+++ /dev/null
@@ -1,10 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config NO_KERNEL_MSG
-	bool "Suppress Kernel BUG Messages"
-	help
-	  Do not output any debug BUG messages within the kernel.
-
-endmenu
diff --git a/arch/v850/Makefile b/arch/v850/Makefile
deleted file mode 100644
index 8b629df0029..00000000000
--- a/arch/v850/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# arch/v850/Makefile
-#
-#  Copyright (C) 2001,02,03,05  NEC Corporation
-#  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-arch_dir = arch/v850
-
-KBUILD_CFLAGS += -mv850e
-# r16 is a fixed pointer to the current task
-KBUILD_CFLAGS += -ffixed-r16 -mno-prolog-function
-KBUILD_CFLAGS += -fno-builtin
-KBUILD_CFLAGS += -D__linux__ -DUTS_SYSNAME=\"uClinux\"
-
-# By default, build a kernel that runs on the gdb v850 simulator.
-KBUILD_DEFCONFIG := sim_defconfig
-
-# This prevents the linker from consolidating the .gnu.linkonce.this_module
-# section into .text (which the v850 default linker script for -r does for
-# some reason)
-LDFLAGS_MODULE += --unique=.gnu.linkonce.this_module
-
-OBJCOPY_FLAGS_BLOB := -I binary -O elf32-little -B v850e
-
-
-head-y := $(arch_dir)/kernel/head.o $(arch_dir)/kernel/init_task.o
-core-y += $(arch_dir)/kernel/
-libs-y += $(arch_dir)/lib/
-
-
-# Deal with the initial contents of the root device
-ifdef ROOT_FS_IMAGE
-core-y += root_fs_image.o
-
-# Because the kernel build-system erases all explicit .o build rules, we
-# have to use an intermediate target to fool it into building for us.
-# This results in it being built anew each time, but that's alright.
-root_fs_image.o: root_fs_image_force
-
-root_fs_image_force: $(ROOT_FS_IMAGE)
-	$(OBJCOPY) $(OBJCOPY_FLAGS_BLOB) --rename-section .data=.root,alloc,load,readonly,data,contents $< root_fs_image.o
-endif
-
-CLEAN_FILES += root_fs_image.o
diff --git a/arch/v850/README b/arch/v850/README
deleted file mode 100644
index 12f7f7a665e..00000000000
--- a/arch/v850/README
+++ /dev/null
@@ -1,44 +0,0 @@
-This port to the NEC V850E processor supports the following platforms:
-
-   "sim"
-	The gdb v850e simulator (CONFIG_V850E_SIM).
-
-   "rte-ma1-cb"
-	The Midas labs RTE-V850E/MA1-CB and RTE-V850E/NB85E-CB evaluation
-	boards (CONFIG_RTE_CB_MA1 and CONFIG_RTE_CB_NB85E).  This support
-	has only been tested when running with the Multi-debugger monitor
-	ROM (for the Green Hills Multi debugger).  The optional NEC
-	Solution Gear RTE-MOTHER-A motherboard is also supported, which
-	allows PCI boards to be used (CONFIG_RTE_MB_A_PCI).
-
-   "rte-me2-cb"
-	The Midas labs RTE-V850E/ME2-CB evaluation board (CONFIG_RTE_CB_ME2).
-     	This has only been tested using a kernel downloaded via an ICE
-     	connection using the Multi debugger.  Support for the RTE-MOTHER-A is
-     	present, but hasn't been tested (unlike the other Midas labs cpu
-     	boards, the RTE-V850E/ME2-CB includes an ethernet adaptor).
-
-   "as85ep1"
-	The NEC AS85EP1 V850E evaluation chip/board (CONFIG_V850E_AS85EP1).
-
-   "anna"
-	The NEC `Anna' (board/chip) implementation of the V850E2 processor
-	(CONFIG_V850E2_ANNA).
-
-   "sim85e2c", "sim85e2s"
-   	The sim85e2c and sim85e2s simulators, which are verilog simulations
-	of the V850E2 NA85E2C/NA85E2S cpu cores (CONFIG_V850E2_SIM85E2C and
-	CONFIG_V850E2_SIM85E2S).
-
-   "fpga85e2c"
-	A FPGA implementation of the V850E2 NA85E2C cpu core
-	(CONFIG_V850E2_FPGA85E2C).
-
-To get a default kernel configuration for a particular platform, you can
-use a <platform>_defconfig make target (e.g., "make rte-me2-cb_defconfig");
-to see which default configurations are possible, look in the directory
-"arch/v850/configs".
-
-Porting to anything with a V850E/MA1 or MA2 processor should be simple.
-See the file <asm-v850/machdep.h> and the files it includes for an example of
-how to add platform/chip-specific support.
diff --git a/arch/v850/configs/rte-ma1-cb_defconfig b/arch/v850/configs/rte-ma1-cb_defconfig
deleted file mode 100644
index 1a5beda36e2..00000000000
--- a/arch/v850/configs/rte-ma1-cb_defconfig
+++ /dev/null
@@ -1,617 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:54:27 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-CONFIG_RTE_CB_MA1=y
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_MA1=y
-CONFIG_RTE_CB=y
-CONFIG_RTE_CB_MULTI=y
-CONFIG_RTE_CB_MULTI_DBTRAP=y
-# CONFIG_RTE_CB_MA1_KSRAM is not set
-CONFIG_RTE_MB_A_PCI=y
-CONFIG_RTE_GBUS_INT=y
-CONFIG_PCI=y
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NE2000 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_V850E_UART=y
-CONFIG_V850E_UART_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/rte-me2-cb_defconfig b/arch/v850/configs/rte-me2-cb_defconfig
deleted file mode 100644
index 15e66647806..00000000000
--- a/arch/v850/configs/rte-me2-cb_defconfig
+++ /dev/null
@@ -1,462 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:47:50 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-CONFIG_RTE_CB_ME2=y
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_ME2=y
-CONFIG_RTE_CB=y
-# CONFIG_RTE_MB_A_PCI is not set
-# CONFIG_PCI is not set
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-CONFIG_V850E_CACHE=y
-# CONFIG_V850E2_CACHE is not set
-# CONFIG_NO_CACHE is not set
-# CONFIG_ROM_KERNEL is not set
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_V850E_UART is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/sim_defconfig b/arch/v850/configs/sim_defconfig
deleted file mode 100644
index f31ba7398ad..00000000000
--- a/arch/v850/configs/sim_defconfig
+++ /dev/null
@@ -1,451 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:36:43 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-CONFIG_V850E_SIM=y
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-# CONFIG_PCI is not set
-# CONFIG_V850E_INTC is not set
-# CONFIG_V850E_TIMER_D is not set
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/kernel/Makefile b/arch/v850/kernel/Makefile
deleted file mode 100644
index da5889c5357..00000000000
--- a/arch/v850/kernel/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# arch/v850/kernel/Makefile
-#
-#  Copyright (C) 2001,02,03  NEC Electronics Corporation
-#  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-extra-y := head.o init_task.o vmlinux.lds
-
-obj-y += intv.o entry.o process.o syscalls.o time.o setup.o \
-	 signal.o irq.o mach.o ptrace.o bug.o
-obj-$(CONFIG_MODULES)		+= module.o v850_ksyms.o
-# chip-specific code
-obj-$(CONFIG_V850E_MA1)		+= ma.o
-obj-$(CONFIG_V850E_ME2)		+= me2.o
-obj-$(CONFIG_V850E_TEG)		+= teg.o
-obj-$(CONFIG_V850E_AS85EP1)	+= as85ep1.o
-obj-$(CONFIG_V850E2_ANNA)	+= anna.o
-# platform-specific code
-obj-$(CONFIG_V850E_SIM)		+= sim.o simcons.o
-obj-$(CONFIG_V850E2_SIM85E2)	+= sim85e2.o memcons.o
-obj-$(CONFIG_V850E2_FPGA85E2C)	+= fpga85e2c.o memcons.o
-obj-$(CONFIG_RTE_CB)		+= rte_cb.o rte_cb_leds.o
-obj-$(CONFIG_RTE_CB_MA1)	+= rte_ma1_cb.o
-obj-$(CONFIG_RTE_CB_ME2)	+= rte_me2_cb.o
-obj-$(CONFIG_RTE_CB_NB85E)	+= rte_nb85e_cb.o
-obj-$(CONFIG_RTE_CB_MULTI)	+= rte_cb_multi.o
-obj-$(CONFIG_RTE_MB_A_PCI)	+= rte_mb_a_pci.o
-obj-$(CONFIG_RTE_GBUS_INT)	+= gbus_int.o
-# feature-specific code
-obj-$(CONFIG_V850E_INTC)	+= v850e_intc.o
-obj-$(CONFIG_V850E_TIMER_D)	+= v850e_timer_d.o v850e_utils.o
-obj-$(CONFIG_V850E_CACHE)	+= v850e_cache.o
-obj-$(CONFIG_V850E2_CACHE)	+= v850e2_cache.o
-obj-$(CONFIG_V850E_HIGHRES_TIMER) += highres_timer.o
-obj-$(CONFIG_PROC_FS)		+= procfs.o
diff --git a/arch/v850/kernel/anna-rom.ld b/arch/v850/kernel/anna-rom.ld
deleted file mode 100644
index 7c54e7e3f1b..00000000000
--- a/arch/v850/kernel/anna-rom.ld
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 8MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00800000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c
deleted file mode 100644
index 5978a25170f..00000000000
--- a/arch/v850/kernel/anna.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/v850/kernel/anna.c -- Anna V850E2 evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	0
-
-
-static void anna_led_tick (void);
-
-
-void __init mach_early_init (void)
-{
-	ANNA_ILBEN    = 0;
-
-	V850E2_CSC(0) = 0x402F;
-	V850E2_CSC(1) = 0x4000;
-	V850E2_BPC    = 0;
-	V850E2_BSC    = 0xAAAA;
-	V850E2_BEC    = 0;
-
-#if 0
-	V850E2_BHC    = 0xFFFF;	/* icache all memory, dcache all */
-#else
-	V850E2_BHC    = 0;	/* cache no memory */
-#endif
-	V850E2_BCT(0) = 0xB088;
-	V850E2_BCT(1) = 0x0008;
-	V850E2_DWC(0) = 0x0027;
-	V850E2_DWC(1) = 0;
-	V850E2_BCC    = 0x0006;
-	V850E2_ASC    = 0;
-	V850E2_LBS    = 0x0089;
-	V850E2_SCR(3) = 0x21A9;
-	V850E2_RFS(3) = 0x8121;
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	ANNA_PORT_PM (LEDS_PORT) = 0;	/* Make all LED pins output pins.  */
-	mach_tick = anna_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-	/* The space between SRAM and SDRAM is filled with duplicate
-	   images of SRAM.  Prevent the kernel from using them.  */
-	reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-			 SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-			 BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "PIN", IRQ_INTP(0),   IRQ_INTP_NUM,   1, 4 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM,	1, 2 },
-	{ "DMXER", IRQ_INTDMXER,1,		1, 2 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	ANNA_PORT_IO(LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* The Anna connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P07
-	   and P37 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		ANNA_PORT_PM(0) &= ~0x80; /* P07 in output mode */
-		ANNA_PORT_PM(3) |=  0x80; /* P37 in input mode */
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  We can't use the last bit because it's used for
-   UART0's CTS output.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 6
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void anna_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				clear_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-				pos += dir;
-				set_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/anna.ld b/arch/v850/kernel/anna.ld
deleted file mode 100644
index df7f80f2833..00000000000
--- a/arch/v850/kernel/anna.ld
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA).  */
-
-MEMORY {
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00040000
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM1 : ORIGIN = 0x00040000, LENGTH = 0x00040000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > iMEM0
-	.sram : { RAMK_KRAM_CONTENTS } > SRAM
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/as85ep1-rom.ld b/arch/v850/kernel/as85ep1-rom.ld
deleted file mode 100644
index fe2a9a3ab52..00000000000
--- a/arch/v850/kernel/as85ep1-rom.ld
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 4MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00400000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jumper JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c
deleted file mode 100644
index b525ecf3aea..00000000000
--- a/arch/v850/kernel/as85ep1.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * arch/v850/kernel/as85ep1.c -- AS85EP1 V850E evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	4
-
-
-static void as85ep1_led_tick (void);
-
-extern char _intv_copy_src_start, _intv_copy_src_end;
-extern char _intv_copy_dst_start;
-
-
-void __init mach_early_init (void)
-{
-#ifndef CONFIG_ROM_KERNEL
-	const u32 *src;
-	register u32 *dst asm ("ep");
-#endif
-
-	AS85EP1_CSC(0) = 0x0403;
-	AS85EP1_BCT(0) = 0xB8B8;
-	AS85EP1_DWC(0) = 0x0104;
-	AS85EP1_BCC    = 0x0012;
-	AS85EP1_ASC    = 0;
-	AS85EP1_LBS    = 0x00A9;
-
-	AS85EP1_PORT_PMC(6)  = 0xFF; /* valid A0,A1,A20-A25 */
-	AS85EP1_PORT_PMC(7)  = 0x0E; /* valid CS1-CS3       */
-	AS85EP1_PORT_PMC(9)  = 0xFF; /* valid D16-D23       */
-	AS85EP1_PORT_PMC(10) = 0xFF; /* valid D24-D31       */
-
-	AS85EP1_RFS(1) = 0x800c;
-	AS85EP1_RFS(3) = 0x800c;
-	AS85EP1_SCR(1) = 0x20A9;
-	AS85EP1_SCR(3) = 0x20A9;
-
-#ifndef CONFIG_ROM_KERNEL
-	/* The early chip we have is buggy, and writing the interrupt
-	   vectors into low RAM may screw up, so for non-ROM kernels, we
-	   only rely on the reset vector being downloaded, and copy the
-	   rest of the interrupt vectors into place here.  The specific bug
-	   is that writing address N, where (N & 0x10) == 0x10, will _also_
-	   write to address (N - 0x10).  We avoid this (effectively) by
-	   writing in 16-byte chunks backwards from the end.  */
-
-	AS85EP1_IRAMM = 0x3;	/* "write-mode" for the internal instruction memory */
-
-	src = (u32 *)(((u32)&_intv_copy_src_end - 1) & ~0xF);
-	dst = (u32 *)&_intv_copy_dst_start
-		+ (src - (u32 *)&_intv_copy_src_start);
-	do {
-		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-		dst -= 4;
-		src -= 4;
-	} while (src > (u32 *)&_intv_copy_src_start);
-
-	AS85EP1_IRAMM = 0x0;	/* "read-mode" for the internal instruction memory */
-#endif /* !CONFIG_ROM_KERNEL */
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	AS85EP1_PORT_PMC (LEDS_PORT) = 0; /* Make the LEDs port an I/O port. */
-	AS85EP1_PORT_PM (LEDS_PORT) = 0; /* Make all the bits output pins.  */
-	mach_tick = as85ep1_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-/* Convenience macros.  */
-#define SRAM_END	(SRAM_ADDR + SRAM_SIZE)
-#define SDRAM_END	(SDRAM_ADDR + SDRAM_SIZE)
-
-void __init mach_reserve_bootmem ()
-{
-	if (SDRAM_ADDR < RAM_END && SDRAM_ADDR > RAM_START)
-		/* We can't use the space between SRAM and SDRAM, so
-		   prevent the kernel from trying.  */
-		reserve_bootmem(SRAM_END, SDRAM_ADDR - SRAM_END,
-				BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	AS85EP1_PORT_IO (LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* Make the shared uart/port pins be uart pins.  */
-	AS85EP1_PORT_PMC(3) |= (0x5 << chan);
-
-	/* The AS85EP1 connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P53
-	   and P54 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		/* Put P53 & P54 in I/O port mode.  */
-		AS85EP1_PORT_PMC(5) &= ~0x18;
-		/* Make P53 an output, and P54 an input.  */
-		AS85EP1_PORT_PM(5) |=  0x10;
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 7
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void as85ep1_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				set_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-				pos += dir;
-				clear_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/as85ep1.ld b/arch/v850/kernel/as85ep1.ld
deleted file mode 100644
index ef2c4399063..00000000000
--- a/arch/v850/kernel/as85ep1.ld
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1).  */
-
-MEMORY {
-	/* 1MB of internal instruction memory. */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00100000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jump JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.resetv : {
-		__intv_start = . ;
-			*(.intv.reset)	/* Reset vector */
-	} > iMEM0
-
-	.sram : {
-		RAMK_KRAM_CONTENTS
-
-		/* We stick most of the interrupt vectors here; they'll be
-		   copied into the proper location by the early init code (we
-		   can't put them directly in the right place because of
-		   hardware bugs).  The vectors shouldn't need to be
-		   relocated, so we don't have to use `> ...  AT> ...' to
-		   split the load/vm addresses (and we can't because of
-		   problems with the loader).  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_start = . ;
-			*(.intv.common)	/* Vectors common to all v850e proc. */
-			*(.intv.mach)	/* Machine-specific int. vectors.  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_end = . ;
-	} > SRAM
-
-	/* Where we end up putting the vectors.  */
-	__intv_copy_dst_start = 0x10 ;
-	__intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
-	__intv_end = __intv_copy_dst_end ;
-
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/asm-offsets.c b/arch/v850/kernel/asm-offsets.c
deleted file mode 100644
index 581e6986a77..00000000000
--- a/arch/v850/kernel/asm-offsets.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/kbuild.h>
-
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-int main (void)
-{
-	/* offsets into the task struct */
-	DEFINE (TASK_STATE, offsetof (struct task_struct, state));
-	DEFINE (TASK_FLAGS, offsetof (struct task_struct, flags));
-	DEFINE (TASK_PTRACE, offsetof (struct task_struct, ptrace));
-	DEFINE (TASK_BLOCKED, offsetof (struct task_struct, blocked));
-	DEFINE (TASK_THREAD, offsetof (struct task_struct, thread));
-	DEFINE (TASK_THREAD_INFO, offsetof (struct task_struct, stack));
-	DEFINE (TASK_MM, offsetof (struct task_struct, mm));
-	DEFINE (TASK_ACTIVE_MM, offsetof (struct task_struct, active_mm));
-	DEFINE (TASK_PID, offsetof (struct task_struct, pid));
-
-	/* offsets into the kernel_stat struct */
-	DEFINE (STAT_IRQ, offsetof (struct kernel_stat, irqs));
-
-
-	/* signal defines */
-	DEFINE (SIGSEGV, SIGSEGV);
-	DEFINE (SEGV_MAPERR, SEGV_MAPERR);
-	DEFINE (SIGTRAP, SIGTRAP);
-	DEFINE (SIGCHLD, SIGCHLD);
-	DEFINE (SIGILL, SIGILL);
-	DEFINE (TRAP_TRACE, TRAP_TRACE);
-
-	/* ptrace flag bits */
-	DEFINE (PT_PTRACED, PT_PTRACED);
-	DEFINE (PT_DTRACE, PT_DTRACE);
-
-	/* error values */
-	DEFINE (ENOSYS, ENOSYS);
-
-	/* clone flag bits */
-	DEFINE (CLONE_VFORK, CLONE_VFORK);
-	DEFINE (CLONE_VM, CLONE_VM);
-
-	return 0;
-}
diff --git a/arch/v850/kernel/bug.c b/arch/v850/kernel/bug.c
deleted file mode 100644
index c78cf750915..00000000000
--- a/arch/v850/kernel/bug.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * arch/v850/kernel/bug.c -- Bug reporting functions
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/current.h>
-
-/* We should use __builtin_return_address, but it doesn't work in gcc-2.90
-   (which is currently our standard compiler on the v850).  */
-#define ret_addr() ({ register u32 lp asm ("lp"); lp; })
-#define stack_addr() ({ register u32 sp asm ("sp"); sp; })
-
-void __bug ()
-{
-	printk (KERN_CRIT "kernel BUG at PC 0x%x (SP ~0x%x)!\n",
-		ret_addr() - 4, /* - 4 for `jarl' */
-		stack_addr());
-	machine_halt ();
-}
-
-int bad_trap (int trap_num, struct pt_regs *regs)
-{
-	printk (KERN_CRIT
-		"unimplemented trap %d called at 0x%08lx, pid %d!\n",
-		trap_num, regs->pc, current->pid);
-	return -ENOSYS;
-}
-
-#ifdef CONFIG_RESET_GUARD
-void unexpected_reset (unsigned long ret_addr, unsigned long kmode,
-		       struct task_struct *task, unsigned long sp)
-{
-	printk (KERN_CRIT
-		"unexpected reset in %s mode, pid %d"
-		" (ret_addr = 0x%lx, sp = 0x%lx)\n",
-		kmode ? "kernel" : "user",
-		task ? task->pid : -1,
-		ret_addr, sp);
-
-	machine_halt ();
-}
-#endif /* CONFIG_RESET_GUARD */
-
-
-
-struct spec_reg_name {
-	const char *name;
-	int gpr;
-};
-
-struct spec_reg_name spec_reg_names[] = {
-	{ "sp", GPR_SP },
-	{ "gp", GPR_GP },
-	{ "tp", GPR_TP },
-	{ "ep", GPR_EP },
-	{ "lp", GPR_LP },
-	{ 0, 0 }
-};
-
-void show_regs (struct pt_regs *regs)
-{
-	int gpr_base, gpr_offs;
-
-	printk ("     pc 0x%08lx    psw 0x%08lx                       kernel_mode %d\n",
-		regs->pc, regs->psw, regs->kernel_mode);
-	printk ("   ctpc 0x%08lx  ctpsw 0x%08lx   ctbp 0x%08lx\n",
-		regs->ctpc, regs->ctpsw, regs->ctbp);
-
-	for (gpr_base = 0; gpr_base < NUM_GPRS; gpr_base += 4) {
-		for (gpr_offs = 0; gpr_offs < 4; gpr_offs++) {
-			int gpr = gpr_base + gpr_offs;
-			long val = regs->gpr[gpr];
-			struct spec_reg_name *srn;
-
-			for (srn = spec_reg_names; srn->name; srn++)
-				if (srn->gpr == gpr)
-					break;
-
-			if (srn->name)
-				printk ("%7s 0x%08lx", srn->name, val);
-			else
-				printk ("    r%02d 0x%08lx", gpr, val);
-		}
-
-		printk ("\n");
-	}
-}
-
-/*
- * TASK is a pointer to the task whose backtrace we want to see (or NULL
- * for current task), SP is the stack pointer of the first frame that
- * should be shown in the back trace (or NULL if the entire call-chain of
- * the task should be shown).
- */
-void show_stack (struct task_struct *task, unsigned long *sp)
-{
-	unsigned long addr, end;
-
-	if (sp)
-		addr = (unsigned long)sp;
-	else if (task)
-		addr = task_sp (task);
-	else
-		addr = stack_addr ();
-
-	addr = addr & ~3;
-	end = (addr + THREAD_SIZE - 1) & THREAD_MASK;
-
-	while (addr < end) {
-		printk ("%8lX: ", addr);
-		while (addr < end) {
-			printk (" %8lX", *(unsigned long *)addr);
-			addr += sizeof (unsigned long);
-			if (! (addr & 0xF))
-				break;
-		}
-		printk ("\n");
-	}
-}
-
-void dump_stack ()
-{
-	show_stack (0, 0);
-}
-
-EXPORT_SYMBOL(dump_stack);
diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S
deleted file mode 100644
index e4327a8d6bc..00000000000
--- a/arch/v850/kernel/entry.S
+++ /dev/null
@@ -1,1121 +0,0 @@
-/*
- * arch/v850/kernel/entry.S -- Low-level system-call handling, trap handlers,
- *	and context-switching
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/sys.h>
-
-#include <asm/entry.h>
-#include <asm/current.h>
-#include <asm/thread_info.h>
-#include <asm/clinkage.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-#include <asm/asm-offsets.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM	C_SYMBOL_NAME
-
-
-/* The offset of the struct pt_regs in a state-save-frame on the stack.  */
-#define PTO	STATE_SAVE_PT_OFFSET
-
-
-/* Save argument registers to the state-save-frame pointed to by EP.  */
-#define SAVE_ARG_REGS							      \
-	sst.w	r6, PTO+PT_GPR(6)[ep];					      \
-	sst.w	r7, PTO+PT_GPR(7)[ep];					      \
-	sst.w	r8, PTO+PT_GPR(8)[ep];					      \
-	sst.w	r9, PTO+PT_GPR(9)[ep]
-/* Restore argument registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_ARG_REGS						      \
-	sld.w	PTO+PT_GPR(6)[ep], r6;					      \
-	sld.w	PTO+PT_GPR(7)[ep], r7;					      \
-	sld.w	PTO+PT_GPR(8)[ep], r8;					      \
-	sld.w	PTO+PT_GPR(9)[ep], r9
-
-/* Save value return registers to the state-save-frame pointed to by EP.  */
-#define SAVE_RVAL_REGS							      \
-	sst.w	r10, PTO+PT_GPR(10)[ep];				      \
-	sst.w	r11, PTO+PT_GPR(11)[ep]
-/* Restore value return registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_RVAL_REGS						      \
-	sld.w	PTO+PT_GPR(10)[ep], r10;				      \
-	sld.w	PTO+PT_GPR(11)[ep], r11
-
-
-#define SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS				      \
-	sst.w	r1, PTO+PT_GPR(1)[ep];					      \
-	sst.w	r5, PTO+PT_GPR(5)[ep]
-#define SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL				      \
-	sst.w	r12, PTO+PT_GPR(12)[ep];				      \
-	sst.w	r13, PTO+PT_GPR(13)[ep];				      \
-	sst.w	r14, PTO+PT_GPR(14)[ep];				      \
-	sst.w	r15, PTO+PT_GPR(15)[ep];				      \
-	sst.w	r16, PTO+PT_GPR(16)[ep];				      \
-	sst.w	r17, PTO+PT_GPR(17)[ep];				      \
-	sst.w	r18, PTO+PT_GPR(18)[ep];				      \
-	sst.w	r19, PTO+PT_GPR(19)[ep]
-#define RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS				      \
-	sld.w	PTO+PT_GPR(1)[ep], r1;					      \
-	sld.w	PTO+PT_GPR(5)[ep], r5
-#define RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL				      \
-	sld.w	PTO+PT_GPR(12)[ep], r12;				      \
-	sld.w	PTO+PT_GPR(13)[ep], r13;				      \
-	sld.w	PTO+PT_GPR(14)[ep], r14;				      \
-	sld.w	PTO+PT_GPR(15)[ep], r15;				      \
-	sld.w	PTO+PT_GPR(16)[ep], r16;				      \
-	sld.w	PTO+PT_GPR(17)[ep], r17;				      \
-	sld.w	PTO+PT_GPR(18)[ep], r18;				      \
-	sld.w	PTO+PT_GPR(19)[ep], r19
-
-/* Save `call clobbered' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS					      \
-	SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;				      \
-	SAVE_ARG_REGS;							      \
-	SAVE_RVAL_REGS;							      \
-	SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers from the state-save-frame pointed to
-   by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS					      \
-	RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;			      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_RVAL_REGS;						      \
-	RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call clobbered' registers except for the return-value registers
-   to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS_NO_RVAL				      \
-	SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;				      \
-	SAVE_ARG_REGS;							      \
-	SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers except for the return-value registers
-   from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS_NO_RVAL				      \
-	RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;			      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call saved' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_SAVED_REGS						      \
-	sst.w	r2, PTO+PT_GPR(2)[ep];					      \
-	sst.w	r20, PTO+PT_GPR(20)[ep];				      \
-	sst.w	r21, PTO+PT_GPR(21)[ep];				      \
-	sst.w	r22, PTO+PT_GPR(22)[ep];				      \
-	sst.w	r23, PTO+PT_GPR(23)[ep];				      \
-	sst.w	r24, PTO+PT_GPR(24)[ep];				      \
-	sst.w	r25, PTO+PT_GPR(25)[ep];				      \
-	sst.w	r26, PTO+PT_GPR(26)[ep];				      \
-	sst.w	r27, PTO+PT_GPR(27)[ep];				      \
-	sst.w	r28, PTO+PT_GPR(28)[ep];				      \
-	sst.w	r29, PTO+PT_GPR(29)[ep]
-/* Restore `call saved' registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_SAVED_REGS						      \
-	sld.w	PTO+PT_GPR(2)[ep], r2;					      \
-	sld.w	PTO+PT_GPR(20)[ep], r20;				      \
-	sld.w	PTO+PT_GPR(21)[ep], r21;				      \
-	sld.w	PTO+PT_GPR(22)[ep], r22;				      \
-	sld.w	PTO+PT_GPR(23)[ep], r23;				      \
-	sld.w	PTO+PT_GPR(24)[ep], r24;				      \
-	sld.w	PTO+PT_GPR(25)[ep], r25;				      \
-	sld.w	PTO+PT_GPR(26)[ep], r26;				      \
-	sld.w	PTO+PT_GPR(27)[ep], r27;				      \
-	sld.w	PTO+PT_GPR(28)[ep], r28;				      \
-	sld.w	PTO+PT_GPR(29)[ep], r29
-
-
-/* Save the PC stored in the special register SAVEREG to the state-save-frame
-   pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PC(savereg)						      \
-	stsr	SR_ ## savereg, r19;					      \
-	sst.w	r19, PTO+PT_PC[ep]
-/* Restore the PC from the state-save-frame pointed to by EP, to the special
-   register SAVEREG.  LP is clobbered (it is used as a scratch register
-   because the POP_STATE macro restores it, and this macro is usually used
-   inside POP_STATE).  */
-#define RESTORE_PC(savereg)						      \
-	sld.w	PTO+PT_PC[ep], lp;					      \
-	ldsr	lp, SR_ ## savereg
-/* Save the PSW register stored in the special register SAVREG to the
-   state-save-frame pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PSW(savereg)						      \
-	stsr	SR_ ## savereg, r19;					      \
-	sst.w	r19, PTO+PT_PSW[ep]
-/* Restore the PSW register from the state-save-frame pointed to by EP, to
-   the special register SAVEREG.  LP is clobbered (it is used as a scratch
-   register because the POP_STATE macro restores it, and this macro is
-   usually used inside POP_STATE).  */
-#define RESTORE_PSW(savereg)						      \
-	sld.w	PTO+PT_PSW[ep], lp;					      \
-	ldsr	lp, SR_ ## savereg
-
-/* Save CTPC/CTPSW/CTBP registers to the state-save-frame pointed to by REG.
-   r19 is clobbered.  */
-#define SAVE_CT_REGS							      \
-	stsr	SR_CTPC, r19;						      \
-	sst.w	r19, PTO+PT_CTPC[ep];					      \
-	stsr	SR_CTPSW, r19;						      \
-	sst.w	r19, PTO+PT_CTPSW[ep];					      \
-	stsr	SR_CTBP, r19;						      \
-	sst.w	r19, PTO+PT_CTBP[ep]
-/* Restore CTPC/CTPSW/CTBP registers from the state-save-frame pointed to by EP.
-   LP is clobbered (it is used as a scratch register because the POP_STATE
-   macro restores it, and this macro is usually used inside POP_STATE).  */
-#define RESTORE_CT_REGS							      \
-	sld.w	PTO+PT_CTPC[ep], lp;					      \
-	ldsr	lp, SR_CTPC;						      \
-	sld.w	PTO+PT_CTPSW[ep], lp;					      \
-	ldsr	lp, SR_CTPSW;						      \
-	sld.w	PTO+PT_CTBP[ep], lp;					      \
-	ldsr	lp, SR_CTBP
-
-
-/* Push register state, except for the stack pointer, on the stack in the
-   form of a state-save-frame (plus some extra padding), in preparation for
-   a system call.  This macro makes sure that the EP, GP, and LP
-   registers are saved, and TYPE identifies the set of extra registers to
-   be saved as well.  Also copies (the new value of) SP to EP.  */
-#define PUSH_STATE(type)						      \
-	addi	-STATE_SAVE_SIZE, sp, sp; /* Make room on the stack.  */      \
-	st.w	ep, PTO+PT_GPR(GPR_EP)[sp];				      \
-	mov	sp, ep;							      \
-	sst.w	gp, PTO+PT_GPR(GPR_GP)[ep];				      \
-	sst.w	lp, PTO+PT_GPR(GPR_LP)[ep];				      \
-	type ## _STATE_SAVER
-/* Pop a register state pushed by PUSH_STATE, except for the stack pointer,
-   from the stack.  */
-#define POP_STATE(type)							      \
-	mov	sp, ep;							      \
-	type ## _STATE_RESTORER;					      \
-	sld.w	PTO+PT_GPR(GPR_GP)[ep], gp;				      \
-	sld.w	PTO+PT_GPR(GPR_LP)[ep], lp;				      \
-	sld.w	PTO+PT_GPR(GPR_EP)[ep], ep;				      \
-	addi	STATE_SAVE_SIZE, sp, sp /* Clean up our stack space.  */
-
-
-/* Switch to the kernel stack if necessary, and push register state on the
-   stack in the form of a state-save-frame.  Also load the current task
-   pointer if switching from user mode.  The stack-pointer (r3) should have
-   already been saved to the memory location SP_SAVE_LOC (the reason for
-   this is that the interrupt vectors may be beyond a 22-bit signed offset
-   jump from the actual interrupt handler, and this allows them to save the
-   stack-pointer and use that register to do an indirect jump).  This macro
-   makes sure that `special' registers, system registers, and the stack
-   pointer are saved; TYPE identifies the set of extra registers to be
-   saved as well.  SYSCALL_NUM is the register in which the system-call
-   number this state is for is stored (r0 if this isn't a system call).
-   Interrupts should already be disabled when calling this.  */
-#define SAVE_STATE(type, syscall_num, sp_save_loc)			      \
-	tst1	0, KM;			/* See if already in kernel mode.  */ \
-	bz	1f;							      \
-	ld.w	sp_save_loc, sp;	/* ... yes, use saved SP.  */	      \
-	br	2f;							      \
-1:	ld.w	KSP, sp;		/* ... no, switch to kernel stack. */ \
-2:	PUSH_STATE(type);						      \
-	ld.b	KM, r19;		/* Remember old kernel-mode.  */      \
-	sst.w	r19, PTO+PT_KERNEL_MODE[ep];				      \
-	ld.w	sp_save_loc, r19;	/* Remember old SP.  */		      \
-	sst.w	r19, PTO+PT_GPR(GPR_SP)[ep];				      \
-	mov	1, r19;			/* Now definitely in kernel-mode. */  \
-	st.b	r19, KM;						      \
-	GET_CURRENT_TASK(CURRENT_TASK);	/* Fetch the current task pointer. */ \
-	/* Save away the syscall number.  */				      \
-	sst.w	syscall_num, PTO+PT_CUR_SYSCALL[ep]
-
-
-/* Save register state not normally saved by PUSH_STATE for TYPE, to the
-   state-save-frame on the stack; also copies SP to EP.  r19 may be trashed. */
-#define SAVE_EXTRA_STATE(type)						      \
-	mov	sp, ep;							      \
-	type ## _EXTRA_STATE_SAVER
-/* Restore register state not normally restored by POP_STATE for TYPE,
-   from the state-save-frame on the stack; also copies SP to EP.
-   r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE(type)					      \
-	mov	sp, ep;							      \
-	type ## _EXTRA_STATE_RESTORER
-
-/* Save any call-clobbered registers not normally saved by PUSH_STATE for
-   TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most SAVE_... macros).  r19 may be trashed.  */
-#define SAVE_EXTRA_STATE_FOR_SCHEDULE(type)				      \
-	type ## _SCHEDULE_EXTRA_STATE_SAVER
-/* Restore any call-clobbered registers not normally restored by
-   POP_STATE for TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most RESTORE_... macros).  r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE_FOR_SCHEDULE(type)				      \
-	type ## _SCHEDULE_EXTRA_STATE_RESTORER
-
-
-/* These are extra_state_saver/restorer values for a user trap.  Note
-   that we save the argument registers so that restarted syscalls will
-   function properly (otherwise it wouldn't be necessary), and we must
-   _not_ restore the return-value registers (so that traps can return a
-   value!), but call-clobbered registers are not saved at all, as the
-   caller of the syscall function should have saved them.  */
-
-#define TRAP_RET reti
-/* Traps don't save call-clobbered registers (but do still save arg regs).
-   We preserve PSw to keep long-term state, namely interrupt status (for traps
-   from kernel-mode), and the single-step flag (for user traps).  */
-#define TRAP_STATE_SAVER						      \
-	SAVE_ARG_REGS;							      \
-	SAVE_PC(EIPC);							      \
-	SAVE_PSW(EIPSW)
-/* When traps return, they just leave call-clobbered registers (except for arg
-   regs) with whatever value they have from the kernel.  Traps don't preserve
-   the PSW, but we zero EIPSW to ensure it doesn't contain anything dangerous
-   (in particular, the single-step flag).  */
-#define TRAP_STATE_RESTORER						      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_PC(EIPC);						      \
-	RESTORE_PSW(EIPSW)
-/* Save registers not normally saved by traps.  We need to save r12, even
-   though it's nominally call-clobbered, because it's used when restarting
-   a system call (the signal-handling path uses SAVE_EXTRA_STATE, and
-   expects r12 to be restored when the trap returns).  */
-#define TRAP_EXTRA_STATE_SAVER						      \
-	SAVE_RVAL_REGS;							      \
-	sst.w	r12, PTO+PT_GPR(12)[ep];				      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define TRAP_EXTRA_STATE_RESTORER					      \
-	RESTORE_RVAL_REGS;						      \
-	sld.w	PTO+PT_GPR(12)[ep], r12;				      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-/* Save registers prior to calling scheduler (just before trap returns).
-   We have to save the return-value registers to preserve the trap's return
-   value.  Note that ..._SCHEDULE_EXTRA_STATE_SAVER, unlike most ..._SAVER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_SAVER					      \
-	mov sp, ep;							      \
-	SAVE_RVAL_REGS
-/* Note that ..._SCHEDULE_EXTRA_STATE_RESTORER, unlike most ..._RESTORER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_RESTORER				      \
-	mov sp, ep;							      \
-	RESTORE_RVAL_REGS
-
-/* Register saving/restoring for maskable interrupts.  */
-#define IRQ_RET reti
-#define IRQ_STATE_SAVER							      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(EIPC);							      \
-	SAVE_PSW(EIPSW)
-#define IRQ_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(EIPC);						      \
-	RESTORE_PSW(EIPSW)
-#define IRQ_EXTRA_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define IRQ_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define IRQ_SCHEDULE_EXTRA_STATE_SAVER	     /* nothing */
-#define IRQ_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for non-maskable interrupts.  */
-#define NMI_RET reti
-#define NMI_STATE_SAVER							      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(FEPC);							      \
-	SAVE_PSW(FEPSW);
-#define NMI_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(FEPC);						      \
-	RESTORE_PSW(FEPSW);
-#define NMI_EXTRA_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define NMI_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define NMI_SCHEDULE_EXTRA_STATE_SAVER	     /* nothing */
-#define NMI_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for debug traps.  */
-#define DBTRAP_RET .long 0x014607E0 /* `dbret', but gas doesn't support it. */
-#define DBTRAP_STATE_SAVER						      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(DBPC);							      \
-	SAVE_PSW(DBPSW)
-#define DBTRAP_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(DBPC);						      \
-	RESTORE_PSW(DBPSW)
-#define DBTRAP_EXTRA_STATE_SAVER					      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define DBTRAP_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define DBTRAP_SCHEDULE_EXTRA_STATE_SAVER	/* nothing */
-#define DBTRAP_SCHEDULE_EXTRA_STATE_RESTORER	/* nothing */
-
-/* Register saving/restoring for a context switch.  We don't need to save
-   too many registers, because context-switching looks like a function call
-   (via the function `switch_thread'), so callers will save any
-   call-clobbered registers themselves.  We do need to save the CT regs, as
-   they're normally not saved during kernel entry (the kernel doesn't use
-   them).  We save PSW so that interrupt-status state will correctly follow
-   each thread (mostly NMI vs. normal-IRQ/trap), though for the most part
-   it doesn't matter since threads are always in almost exactly the same
-   processor state during a context switch.  The stack pointer and return
-   value are handled by switch_thread itself.  */
-#define SWITCH_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_PSW(PSW);							      \
-	SAVE_CT_REGS
-#define SWITCH_STATE_RESTORER						      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_PSW(PSW);						      \
-	RESTORE_CT_REGS
-
-
-/* Restore register state from the state-save-frame on the stack, switch back
-   to the user stack if necessary, and return from the trap/interrupt.
-   EXTRA_STATE_RESTORER is a sequence of assembly language statements to
-   restore anything not restored by this macro.  Only registers not saved by
-   the C compiler are restored (that is, R3(sp), R4(gp), R31(lp), and
-   anything restored by EXTRA_STATE_RESTORER).  */
-#define RETURN(type)							      \
-	ld.b	PTO+PT_KERNEL_MODE[sp], r19;				      \
-	di;				/* Disable interrupts */	      \
-	cmp	r19, r0;		/* See if returning to kernel mode, */\
-	bne	2f;			/* ... if so, skip resched &c.  */    \
-									      \
-	/* We're returning to user mode, so check for various conditions that \
-	   trigger rescheduling. */					      \
-	GET_CURRENT_THREAD(r18);					      \
-	ld.w	TI_FLAGS[r18], r19;					      \
-	andi	_TIF_NEED_RESCHED, r19, r0;				      \
-	bnz	3f;			/* Call the scheduler.  */	      \
-5:	andi	_TIF_SIGPENDING, r19, r18;				      \
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19; /* ptrace flags */	      \
-	or	r18, r19;		/* see if either is non-zero */	      \
-	bnz	4f;			/* if so, handle them */	      \
-									      \
-/* Return to user state.  */						      \
-1:	st.b	r0, KM;			/* Now officially in user state. */   \
-									      \
-/* Final return.  The stack-pointer fiddling is not needed when returning     \
-   to kernel-mode, but they don't hurt, and this way we can share the	      \
-   (sometimes rather lengthy) POP_STATE macro.  */			      \
-2:	POP_STATE(type);						      \
-	st.w	sp, KSP;		/* Save the kernel stack pointer. */  \
-	ld.w	PT_GPR(GPR_SP)-PT_SIZE[sp], sp; /* Restore stack pointer. */  \
-	type ## _RET;			/* Return from the trap/interrupt. */ \
-									      \
-/* Call the scheduler before returning from a syscall/trap. */		      \
-3:	SAVE_EXTRA_STATE_FOR_SCHEDULE(type); /* Prepare to call scheduler. */ \
-	jarl	call_scheduler, lp;	/* Call scheduler */		      \
-	di;				/* The scheduler enables interrupts */\
-	RESTORE_EXTRA_STATE_FOR_SCHEDULE(type);				      \
-	GET_CURRENT_THREAD(r18);					      \
-	ld.w	TI_FLAGS[r18], r19;					      \
-	br	5b;			/* Continue with return path. */      \
-									      \
-/* Handle a signal or ptraced process return.				      \
-   r18 should be non-zero if there are pending signals.  */		      \
-4:	/* Not all registers are saved by the normal trap/interrupt entry     \
-	   points (for instance, call-saved registers (because the normal     \
-	   C-compiler calling sequence in the kernel makes sure they're	      \
-	   preserved), and call-clobbered registers in the case of	      \
-	   traps), but signal handlers may want to examine or change the      \
-	   complete register state.  Here we save anything not saved by	      \
-	   the normal entry sequence, so that it may be safely restored	      \
-	   (in a possibly modified form) after do_signal returns.  */	      \
-	SAVE_EXTRA_STATE(type);		/* Save state not saved by entry. */  \
-	jarl	handle_signal_or_ptrace_return, lp;			      \
-	RESTORE_EXTRA_STATE(type);	/* Restore extra regs.  */	      \
-	br	1b
-
-
-/* Jump to the appropriate function for the system call number in r12
-   (r12 is not preserved), or return an error if r12 is not valid.  The
-   LP register should point to the location where the called function
-   should return.  [note that MAKE_SYS_CALL uses label 1]  */
-#define MAKE_SYS_CALL							      \
-	/* Figure out which function to use for this system call.  */	      \
-	shl	2, r12;							      \
-	/* See if the system call number is valid.  */			      \
-	addi	lo(CSYM(sys_call_table) - sys_call_table_end), r12, r0;	      \
-	bnh	1f;							      \
-	mov	hilo(CSYM(sys_call_table)), r19;			      \
-	add	r19, r12;						      \
-	ld.w	0[r12], r12;						      \
-	/* Make the system call.  */					      \
-	jmp	[r12];							      \
-	/* The syscall number is invalid, return an error.  */		      \
-1:	addi	-ENOSYS, r0, r10;					      \
-	jmp	[lp]
-
-
-	.text
-
-/*
- * User trap.
- *
- * Trap 0 system calls are also handled here.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- *
- * Syscall protocol:
- *   Syscall number in r12, args in r6-r9
- *   Return value in r10
- */
-G_ENTRY(trap):
-	SAVE_STATE (TRAP, r12, ENTRY_SP) // Save registers.
-	stsr	SR_ECR, r19		// Find out which trap it was.
-	ei				// Enable interrupts.
-	mov	hilo(ret_from_trap), lp	// where the trap should return
-
-	// The following two shifts (1) clear out extraneous NMI data in the
-	// upper 16-bits, (2) convert the 0x40 - 0x5f range of trap ECR
-	// numbers into the (0-31) << 2 range we want, (3) set the flags.
-	shl	27, r19			// chop off all high bits
-	shr	25, r19			// scale back down and then << 2
-	bnz	2f			// See if not trap 0.
-
-	// Trap 0 is a `short' system call, skip general trap table.
-	MAKE_SYS_CALL			// Jump to the syscall function.
-
-2:	// For other traps, use a table lookup.
-	mov	hilo(CSYM(trap_table)), r18
-	add	r19, r18
-	ld.w	0[r18], r18
-	jmp	[r18]			// Jump to the trap handler.
-END(trap)
-
-/* This is just like ret_from_trap, but first restores extra registers
-   saved by some wrappers.  */
-L_ENTRY(restore_extra_regs_and_ret_from_trap):
-	RESTORE_EXTRA_STATE(TRAP)
-	// fall through
-END(restore_extra_regs_and_ret_from_trap)
-
-/* Entry point used to return from a syscall/trap.  */
-L_ENTRY(ret_from_trap):
-	RETURN(TRAP)
-END(ret_from_trap)
-
-
-/* This the initial entry point for a new child thread, with an appropriate
-   stack in place that makes it look that the child is in the middle of an
-   syscall.  This function is actually `returned to' from switch_thread
-   (copy_thread makes ret_from_fork the return address in each new thread's
-   saved context).  */
-C_ENTRY(ret_from_fork):
-	mov	r10, r6			// switch_thread returns the prev task.
-	jarl	CSYM(schedule_tail), lp	// ...which is schedule_tail's arg
-	mov	r0, r10			// Child's fork call should return 0.
-	br	ret_from_trap		// Do normal trap return.
-C_END(ret_from_fork)
-
-
-/*
- * Trap 1: `long' system calls
- * `Long' syscall protocol:
- *   Syscall number in r12, args in r6-r9, r13-r14
- *   Return value in r10
- */
-L_ENTRY(syscall_long):
-	// Push extra arguments on the stack.  Note that by default, the trap
-	// handler reserves enough stack space for 6 arguments, so we don't
-	// have to make any additional room.
-	st.w	r13, 16[sp]		// arg 5
-	st.w	r14, 20[sp]		// arg 6
-
-	// Make sure r13 and r14 are preserved, in case we have to restart a
-	// system call because of a signal (ep has already been set by caller).
-	st.w	r13, PTO+PT_GPR(13)[sp]
-	st.w	r14, PTO+PT_GPR(13)[sp]
-	mov	hilo(ret_from_long_syscall), lp
-
-	MAKE_SYS_CALL			// Jump to the syscall function.
-END(syscall_long)
-
-/* Entry point used to return from a long syscall.  Only needed to restore
-   r13/r14 if the general trap mechanism doesnt' do so.  */
-L_ENTRY(ret_from_long_syscall):
-	ld.w	PTO+PT_GPR(13)[sp], r13 // Restore the extra registers
-	ld.w	PTO+PT_GPR(13)[sp], r14
-	br	ret_from_trap		// The rest is the same as other traps
-END(ret_from_long_syscall)
-
-
-/* These syscalls need access to the struct pt_regs on the stack, so we
-   implement them in assembly (they're basically all wrappers anyway).  */
-
-L_ENTRY(sys_fork_wrapper):
-#ifdef CONFIG_MMU
-	addi	SIGCHLD, r0, r6		   // Arg 0: flags
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-#else
-	// fork almost works, enough to trick you into looking elsewhere :-(
-	addi	-EINVAL, r0, r10
-	jmp	[lp]
-#endif
-END(sys_fork_wrapper)
-
-L_ENTRY(sys_vfork_wrapper):
-	addi	CLONE_VFORK | CLONE_VM | SIGCHLD, r0, r6 // Arg 0: flags
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-END(sys_vfork_wrapper)
-
-L_ENTRY(sys_clone_wrapper):
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r19// parent's stack pointer
-	cmp	r7, r0			   // See if child SP arg (arg 1) is 0.
-	cmov	z, r19, r7, r7		   // ... and use the parent's if so.
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-END(sys_clone_wrapper)
-
-
-L_ENTRY(sys_execve_wrapper):
-	movea	PTO, sp, r9		// add user context as 4th arg
-	jr	CSYM(sys_execve)	// Do real work (tail-call).
-END(sys_execve_wrapper)
-
-
-L_ENTRY(sys_sigsuspend_wrapper):
-	movea	PTO, sp, r7		// add user context as 2nd arg
-	mov	hilo(CSYM(sys_sigsuspend)), r18	// syscall function
-	jarl	save_extra_state_tramp, lp	// Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_sigsuspend_wrapper)
-L_ENTRY(sys_rt_sigsuspend_wrapper):
-	movea	PTO, sp, r8		// add user context as 3rd arg
-	mov	hilo(CSYM(sys_rt_sigsuspend)), r18 // syscall function
-	jarl	save_extra_state_tramp, lp	   // Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigsuspend_wrapper)
-
-L_ENTRY(sys_sigreturn_wrapper):
-	movea	PTO, sp, r6		// add user context as 1st arg
-	mov	hilo(CSYM(sys_sigreturn)), r18	// syscall function
-	jarl	save_extra_state_tramp, lp	// Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_sigreturn_wrapper)
-L_ENTRY(sys_rt_sigreturn_wrapper):
-	movea	PTO, sp, r6		// add user context as 1st arg
-	mov	hilo(CSYM(sys_rt_sigreturn)), r18// syscall function
-	jarl	save_extra_state_tramp, lp	 // Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigreturn_wrapper)
-
-
-/* Save any state not saved by SAVE_STATE(TRAP), and jump to r18.
-   It's main purpose is to share the rather lengthy code sequence that
-   SAVE_STATE expands into among the above wrapper functions.  */
-L_ENTRY(save_extra_state_tramp):
-	SAVE_EXTRA_STATE(TRAP)		// Save state not saved by entry.
-	jmp	[r18]			// Do the work the caller wants
-END(save_extra_state_tramp)
-
-
-/*
- * Hardware maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(irq):
-	SAVE_STATE (IRQ, r0, ENTRY_SP)	// Save registers.
-
-	stsr	SR_ECR, r6		// Find out which interrupt it was.
-	movea	PTO, sp, r7		// User regs are arg2
-
-	// All v850 implementations I know about encode their interrupts as
-	// multiples of 0x10, starting at 0x80 (after NMIs and software
-	// interrupts).  Convert this number into a simple IRQ index for the
-	// rest of the kernel.  We also clear the upper 16 bits, which hold
-	// NMI info, and don't appear to be cleared when a NMI returns.
-	shl	16, r6			// clear upper 16 bits
-	shr	20, r6			// shift back, and remove lower nibble
-	add	-8, r6			// remove bias for irqs
-
-	// Call the high-level interrupt handling code.
-	jarl	CSYM(handle_irq), lp
-
-	RETURN(IRQ)
-END(irq)
-
-
-/*
- * Debug trap / illegal-instruction exception
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(dbtrap):
-	SAVE_STATE (DBTRAP, r0, ENTRY_SP)// Save registers.
-
-	/* First see if we came from kernel mode; if so, the dbtrap
-	   instruction has a special meaning, to set the DIR (`debug
-	   information register') register.  This is because the DIR register
-	   can _only_ be manipulated/read while in `debug mode,' and debug
-	   mode is only active while we're inside the dbtrap handler.  The
-	   exact functionality is:  { DIR = (DIR | r6) & ~r7; return DIR; }. */
-	ld.b	PTO+PT_KERNEL_MODE[sp], r19
-	cmp	r19, r0
-	bz	1f
-
-	stsr	SR_DIR, r10
-	or	r6, r10
-	not	r7, r7
-	and	r7, r10
-	ldsr	r10, SR_DIR
-	stsr	SR_DIR, r10		// Confirm the value we set
-	st.w	r10, PTO+PT_GPR(10)[sp]	// return it
-	br	3f
-
-1:	ei				// Enable interrupts.
-
-	/* The default signal type we raise.  */
-	mov	SIGTRAP, r6
-
-	/* See if it's a single-step trap.  */
-	stsr	SR_DBPSW, r19
-	andi	0x0800, r19, r19
-	bnz	2f
-
-	/* Look to see if the preceding instruction was is a dbtrap or not,
-	   to decide which signal we should use.  */
-	stsr	SR_DBPC, r19		// PC following trapping insn
-	ld.hu	-2[r19], r19
-	ori	0xf840, r0, r20		// DBTRAP insn
-	cmp	r19, r20		// Was this trap caused by DBTRAP?
-	cmov	ne, SIGILL, r6, r6	// Choose signal appropriately
-
-	/* Raise the desired signal.  */
-2:	mov	CURRENT_TASK, r7	// Arg 1: task
-	jarl	CSYM(send_sig), lp	// tail call
-
-3:	RETURN(DBTRAP)
-END(dbtrap)
-
-
-/*
- * Hardware non-maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(nmi):
-	SAVE_STATE (NMI, r0, NMI_ENTRY_SP); /* Save registers.  */
-
-	stsr	SR_ECR, r6;		/* Find out which nmi it was.  */
-	shr	20, r6;			/* Extract NMI code in bits 20-24. */
-	movea	PTO, sp, r7;		/* User regs are arg2.  */
-
-	/* Non-maskable interrupts always lie right after maskable interrupts.
-	   Call the generic IRQ handler, with two arguments, the IRQ number,
-	   and a pointer to the user registers, to handle the specifics.
-	   (we subtract one because the first NMI has code 1).  */
-	addi	FIRST_NMI - 1, r6, r6
-	jarl	CSYM(handle_irq), lp
-
-	RETURN(NMI)
-END(nmi)
-
-
-/*
- * Trap with no handler
- */
-L_ENTRY(bad_trap_wrapper):
-	mov	r19, r6			// Arg 0: trap number
-	movea	PTO, sp, r7		// Arg 1: user regs
-	jr	CSYM(bad_trap)		// tail call handler
-END(bad_trap_wrapper)
-
-
-/*
- * Invoke the scheduler, called from the trap/irq kernel exit path.
- *
- * This basically just calls `schedule', but also arranges for extra
- * registers to be saved for ptrace'd processes, so ptrace can modify them.
- */
-L_ENTRY(call_scheduler):
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19	// See if task is ptrace'd
-	cmp	r19, r0
-	bnz	1f			// ... yes, do special stuff
-	jr	CSYM(schedule)		// ... no, just tail-call scheduler
-
-	// Save extra regs for ptrace'd task.  We want to save anything
-	// that would otherwise only be `implicitly' saved by the normal
-	// compiler calling-convention.
-1:	mov	sp, ep			// Setup EP for SAVE_CALL_SAVED_REGS
-	SAVE_CALL_SAVED_REGS		// Save call-saved registers to stack
-	mov	lp, r20			// Save LP in a callee-saved register
-
-	jarl	CSYM(schedule), lp	// Call scheduler
-
-	mov	r20, lp
-	mov	sp, ep			// We can't rely on EP after return
-	RESTORE_CALL_SAVED_REGS		// Restore (possibly modified) regs
-	jmp	[lp]			// Return to the return path
-END(call_scheduler)
-
-
-/*
- * This is an out-of-line handler for two special cases during the kernel
- * trap/irq exit sequence:
- *
- *  (1) If r18 is non-zero then a signal needs to be handled, which is
- *	done, and then the caller returned to.
- *
- *  (2) If r18 is non-zero then we're returning to a ptraced process, which
- *	has several special cases -- single-stepping and trap tracing, both
- *	of which require using the `dbret' instruction to exit the kernel
- *	instead of the normal `reti' (this is because the CPU not correctly
- *	single-step after a reti).  In this case, of course, this handler
- *	never returns to the caller.
- *
- * In either case, all registers should have been saved to the current
- * state-save-frame on the stack, except for callee-saved registers.
- *
- * [These two different cases are combined merely to avoid bloating the
- * macro-inlined code, not because they really make much sense together!]
- */
-L_ENTRY(handle_signal_or_ptrace_return):
-	cmp	r18, r0			// See if handling a signal
-	bz	1f			// ... nope, go do ptrace return
-
-	// Handle a signal
-	mov	lp, r20			// Save link-pointer
-	mov	r10, r21		// Save return-values (for trap)
-	mov	r11, r22
-
-	movea	PTO, sp, r6		// Arg 1: struct pt_regs *regs
-	mov	r0, r7			// Arg 2: sigset_t *oldset
-	jarl	CSYM(do_signal), lp	// Handle the signal
-	di				// sig handling enables interrupts
-
-	mov	r20, lp			// Restore link-pointer
-	mov	r21, r10		// Restore return-values (for trap)
-	mov	r22, r11
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19  // check ptrace flags too
-	cmp	r19, r0
-	bnz	1f			// ... some set, so look more
-2:	jmp	[lp]			// ... none set, so return normally
-
-	// ptrace return
-1:	ld.w	PTO+PT_PSW[sp], r19	// Look at user-processes's flags
-	andi	0x0800, r19, r19	// See if single-step flag is set
-	bz	2b			// ... nope, return normally
-
-	// Return as if from a dbtrap insn
-	st.b	r0, KM			// Now officially in user state.
-	POP_STATE(DBTRAP)		// Restore regs
-	st.w	sp, KSP			// Save the kernel stack pointer.
-	ld.w	PT_GPR(GPR_SP)-PT_SIZE[sp], sp // Restore user stack pointer.
-	DBTRAP_RET			// Return from the trap/interrupt.
-END(handle_signal_or_ptrace_return)
-
-
-/*
- * This is where we switch between two threads.  The arguments are:
- *   r6 -- pointer to the struct thread for the `current' process
- *   r7 -- pointer to the struct thread for the `new' process.
- * when this function returns, it will return to the new thread.
- */
-C_ENTRY(switch_thread):
-	// Return the previous task (r10 is not clobbered by restore below)
-	mov	CURRENT_TASK, r10
-	// First, push the current processor state on the stack
-	PUSH_STATE(SWITCH)
-	// Now save the location of the kernel stack pointer for this thread;
-	// since we've pushed all other state on the stack, this is enough to
-	// restore it all later.
-	st.w	sp, THREAD_KSP[r6]
-	// Now restore the stack pointer from the new process
-	ld.w	THREAD_KSP[r7], sp
-	// ... and restore all state from that
-	POP_STATE(SWITCH)
-	// Update the current task pointer
-	GET_CURRENT_TASK(CURRENT_TASK)
-	// Now return into the new thread
-	jmp	[lp]
-C_END(switch_thread)
-
-
-	.data
-
-	.align 4
-C_DATA(trap_table):
-	.long bad_trap_wrapper		// trap 0, doesn't use trap table.
-	.long syscall_long		// trap 1, `long' syscall.
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-C_END(trap_table)
-
-
-	.section .rodata
-
-	.align 4
-C_DATA(sys_call_table):
-	.long CSYM(sys_restart_syscall)	// 0
-	.long CSYM(sys_exit)
-	.long sys_fork_wrapper
-	.long CSYM(sys_read)
-	.long CSYM(sys_write)
-	.long CSYM(sys_open)		// 5
-	.long CSYM(sys_close)
-	.long CSYM(sys_waitpid)
-	.long CSYM(sys_creat)
-	.long CSYM(sys_link)
-	.long CSYM(sys_unlink)		// 10
-	.long sys_execve_wrapper
-	.long CSYM(sys_chdir)
-	.long CSYM(sys_time)
-	.long CSYM(sys_mknod)
-	.long CSYM(sys_chmod)		// 15
-	.long CSYM(sys_chown)
-	.long CSYM(sys_ni_syscall)	// was: break
-	.long CSYM(sys_ni_syscall)	// was: oldstat (aka stat)
-	.long CSYM(sys_lseek)
-	.long CSYM(sys_getpid)		// 20
-	.long CSYM(sys_mount)
-	.long CSYM(sys_oldumount)
-	.long CSYM(sys_setuid)
-	.long CSYM(sys_getuid)
-	.long CSYM(sys_stime)		// 25
-	.long CSYM(sys_ptrace)
-	.long CSYM(sys_alarm)
-	.long CSYM(sys_ni_syscall)	// was: oldfstat (aka fstat)
-	.long CSYM(sys_pause)
-	.long CSYM(sys_utime)		// 30
-	.long CSYM(sys_ni_syscall)	// was: stty
-	.long CSYM(sys_ni_syscall)	// was: gtty
-	.long CSYM(sys_access)
-	.long CSYM(sys_nice)
-	.long CSYM(sys_ni_syscall)	// 35, was: ftime
-	.long CSYM(sys_sync)
-	.long CSYM(sys_kill)
-	.long CSYM(sys_rename)
-	.long CSYM(sys_mkdir)
-	.long CSYM(sys_rmdir)		// 40
-	.long CSYM(sys_dup)
-	.long CSYM(sys_pipe)
-	.long CSYM(sys_times)
-	.long CSYM(sys_ni_syscall)	// was: prof
-	.long CSYM(sys_brk)		// 45
-	.long CSYM(sys_setgid)
-	.long CSYM(sys_getgid)
-	.long CSYM(sys_signal)
-	.long CSYM(sys_geteuid)
-	.long CSYM(sys_getegid)		// 50
-	.long CSYM(sys_acct)
-	.long CSYM(sys_umount)		// recycled never used phys()
-	.long CSYM(sys_ni_syscall)	// was: lock
-	.long CSYM(sys_ioctl)
-	.long CSYM(sys_fcntl)		// 55
-	.long CSYM(sys_ni_syscall)	// was: mpx
-	.long CSYM(sys_setpgid)
-	.long CSYM(sys_ni_syscall)	// was: ulimit
-	.long CSYM(sys_ni_syscall)
-	.long CSYM(sys_umask)		// 60
-	.long CSYM(sys_chroot)
-	.long CSYM(sys_ustat)
-	.long CSYM(sys_dup2)
-	.long CSYM(sys_getppid)
-	.long CSYM(sys_getpgrp)		// 65
-	.long CSYM(sys_setsid)
-	.long CSYM(sys_sigaction)
-	.long CSYM(sys_sgetmask)
-	.long CSYM(sys_ssetmask)
-	.long CSYM(sys_setreuid)	// 70
-	.long CSYM(sys_setregid)
-	.long sys_sigsuspend_wrapper
-	.long CSYM(sys_sigpending)
-	.long CSYM(sys_sethostname)
-	.long CSYM(sys_setrlimit)	// 75
-	.long CSYM(sys_getrlimit)
-	.long CSYM(sys_getrusage)
-	.long CSYM(sys_gettimeofday)
-	.long CSYM(sys_settimeofday)
-	.long CSYM(sys_getgroups)	// 80
-	.long CSYM(sys_setgroups)
-	.long CSYM(sys_select)
-	.long CSYM(sys_symlink)
-	.long CSYM(sys_ni_syscall)	// was: oldlstat (aka lstat)
-	.long CSYM(sys_readlink)	// 85
-	.long CSYM(sys_uselib)
-	.long CSYM(sys_swapon)
-	.long CSYM(sys_reboot)
-	.long CSYM(old_readdir)
-	.long CSYM(sys_mmap)		// 90
-	.long CSYM(sys_munmap)
-	.long CSYM(sys_truncate)
-	.long CSYM(sys_ftruncate)
-	.long CSYM(sys_fchmod)
-	.long CSYM(sys_fchown)		// 95
-	.long CSYM(sys_getpriority)
-	.long CSYM(sys_setpriority)
-	.long CSYM(sys_ni_syscall)	// was: profil
-	.long CSYM(sys_statfs)
-	.long CSYM(sys_fstatfs)		// 100
-	.long CSYM(sys_ni_syscall)	// i386: ioperm
-	.long CSYM(sys_socketcall)
-	.long CSYM(sys_syslog)
-	.long CSYM(sys_setitimer)
-	.long CSYM(sys_getitimer)	// 105
-	.long CSYM(sys_newstat)
-	.long CSYM(sys_newlstat)
-	.long CSYM(sys_newfstat)
-	.long CSYM(sys_ni_syscall)	// was: olduname (aka uname)
-	.long CSYM(sys_ni_syscall)	// 110, i386: iopl
-	.long CSYM(sys_vhangup)
-	.long CSYM(sys_ni_syscall)	// was: idle
-	.long CSYM(sys_ni_syscall)	// i386: vm86old
-	.long CSYM(sys_wait4)
-	.long CSYM(sys_swapoff)		// 115
-	.long CSYM(sys_sysinfo)
-	.long CSYM(sys_ipc)
-	.long CSYM(sys_fsync)
-	.long sys_sigreturn_wrapper
-	.long sys_clone_wrapper		// 120
-	.long CSYM(sys_setdomainname)
-	.long CSYM(sys_newuname)
-	.long CSYM(sys_ni_syscall)	// i386: modify_ldt, m68k: cacheflush
-	.long CSYM(sys_adjtimex)
-	.long CSYM(sys_ni_syscall)	// 125 - sys_mprotect
-	.long CSYM(sys_sigprocmask)
-	.long CSYM(sys_ni_syscall)	// sys_create_module
-	.long CSYM(sys_init_module)
-	.long CSYM(sys_delete_module)
-	.long CSYM(sys_ni_syscall)	// 130 - sys_get_kernel_syms
-	.long CSYM(sys_quotactl)
-	.long CSYM(sys_getpgid)
-	.long CSYM(sys_fchdir)
-	.long CSYM(sys_bdflush)
-	.long CSYM(sys_sysfs)		// 135
-	.long CSYM(sys_personality)
-	.long CSYM(sys_ni_syscall)	// for afs_syscall
-	.long CSYM(sys_setfsuid)
-	.long CSYM(sys_setfsgid)
-	.long CSYM(sys_llseek)		// 140
-	.long CSYM(sys_getdents)
-	.long CSYM(sys_select)		// for backward compat; remove someday
-	.long CSYM(sys_flock)
-	.long CSYM(sys_ni_syscall)	// sys_msync
-	.long CSYM(sys_readv)		// 145
-	.long CSYM(sys_writev)
-	.long CSYM(sys_getsid)
-	.long CSYM(sys_fdatasync)
-	.long CSYM(sys_sysctl)
-	.long CSYM(sys_ni_syscall)	// 150 - sys_mlock
-	.long CSYM(sys_ni_syscall)	// sys_munlock
-	.long CSYM(sys_ni_syscall)	// sys_mlockall
-	.long CSYM(sys_ni_syscall)	// sys_munlockall
-	.long CSYM(sys_sched_setparam)
-	.long CSYM(sys_sched_getparam)	// 155
-	.long CSYM(sys_sched_setscheduler)
-	.long CSYM(sys_sched_getscheduler)
-	.long CSYM(sys_sched_yield)
-	.long CSYM(sys_sched_get_priority_max)
-	.long CSYM(sys_sched_get_priority_min)	// 160
-	.long CSYM(sys_sched_rr_get_interval)
-	.long CSYM(sys_nanosleep)
-	.long CSYM(sys_ni_syscall)	// sys_mremap
-	.long CSYM(sys_setresuid)
-	.long CSYM(sys_getresuid)	// 165
-	.long CSYM(sys_ni_syscall)	// for vm86
-	.long CSYM(sys_ni_syscall)	// sys_query_module
-	.long CSYM(sys_poll)
-	.long CSYM(sys_nfsservctl)
-	.long CSYM(sys_setresgid)	// 170
-	.long CSYM(sys_getresgid)
-	.long CSYM(sys_prctl)
-	.long sys_rt_sigreturn_wrapper
-	.long CSYM(sys_rt_sigaction)
-	.long CSYM(sys_rt_sigprocmask)	// 175
-	.long CSYM(sys_rt_sigpending)
-	.long CSYM(sys_rt_sigtimedwait)
-	.long CSYM(sys_rt_sigqueueinfo)
-	.long sys_rt_sigsuspend_wrapper
-	.long CSYM(sys_pread64)		// 180
-	.long CSYM(sys_pwrite64)
-	.long CSYM(sys_lchown)
-	.long CSYM(sys_getcwd)
-	.long CSYM(sys_capget)
-	.long CSYM(sys_capset)		// 185
-	.long CSYM(sys_sigaltstack)
-	.long CSYM(sys_sendfile)
-	.long CSYM(sys_ni_syscall)	// streams1
-	.long CSYM(sys_ni_syscall)	// streams2
-	.long sys_vfork_wrapper		// 190
-	.long CSYM(sys_ni_syscall)
-	.long CSYM(sys_mmap2)
-	.long CSYM(sys_truncate64)
-	.long CSYM(sys_ftruncate64)
-	.long CSYM(sys_stat64)		// 195
-	.long CSYM(sys_lstat64)
-	.long CSYM(sys_fstat64)
-	.long CSYM(sys_fcntl64)
-	.long CSYM(sys_getdents64)
-	.long CSYM(sys_pivot_root)	// 200
-	.long CSYM(sys_gettid)
-	.long CSYM(sys_tkill)
-sys_call_table_end:
-C_END(sys_call_table)
diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c
deleted file mode 100644
index ab9cf16a85c..00000000000
--- a/arch/v850/kernel/fpga85e2c.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * arch/v850/kernel/fpga85e2c.h -- Machine-dependent defs for
- *	FPGA implementation of V850E2/NA85E2C
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-extern void memcons_setup (void);
-
-
-#define REG_DUMP_ADDR		0x220000
-
-
-extern struct irqaction reg_snap_action; /* fwd decl */
-
-
-void __init mach_early_init (void)
-{
-	int i;
-	const u32 *src;
-	register u32 *dst asm ("ep");
-	extern u32 _intv_end, _intv_load_start;
-
-	/* Set bus sizes: CS0 32-bit, CS1 16-bit, CS7 8-bit,
-	   everything else 32-bit.  */
-	V850E2_BSC = 0x2AA6;
-	for (i = 2; i <= 6; i++)
-		CSDEV(i) = 0;	/* 32 bit */
-
-	/* Ensure that the simulator halts on a panic, instead of going
-	   into an infinite loop inside the panic function.  */
-	panic_timeout = -1;
-
-	/* Move the interrupt vectors into their real location.  Note that
-	   any relocations there are relative to the real location, so we
-	   don't have to fix anything up.  We use a loop instead of calling
-	   memcpy to keep this a leaf function (to avoid a function
-	   prologue being generated).  */
-	dst = 0x10;		/* &_intv_start + 0x10.  */
-	src = &_intv_load_start;
-	do {
-		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-		u32 t4 = src[4], t5 = src[5], t6 = src[6], t7 = src[7];
-		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-		dst[4] = t4; dst[5] = t5; dst[6] = t6; dst[7] = t7;
-		dst += 8;
-		src += 8;
-	} while (dst < &_intv_end);
-}
-
-void __init mach_setup (char **cmdline)
-{
-	memcons_setup ();
-
-	/* Setup up NMI0 to copy the registers to a known memory location.
-	   The FGPA board has a button that produces NMI0 when pressed, so
-	   this allows us to push the button, and then look at memory to see
-	   what's in the registers (there's no other way to easily do so).
-	   We have to use `setup_irq' instead of `request_irq' because it's
-	   still too early to do memory allocation.  */
-	setup_irq (IRQ_NMI (0), &reg_snap_action);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = ERAM_ADDR;
-	*ram_len = ERAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Setup up the timer interrupt.  The FPGA peripheral control
-	   registers _only_ work with single-bit writes (set1/clr1)!  */
-	__clear_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-	__clear_bit (RPU_GTMC_CLK_BIT, &RPU_GTMC);
-	__set_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-
-	/* We use the first RPU interrupt, which occurs every 8.192ms.  */
-	setup_irq (IRQ_RPU (0), timer_action);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-	for (;;) {
-		DWC(0) = 0x7777;
-		DWC(1) = 0x7777;
-		ASC = 0xffff;
-		FLGREG(0) = 1;	/* Halt immediately.  */
-		asm ("di; halt; nop; nop; nop; nop; nop");
-	}
-}
-
-void machine_restart (char *__unused)
-{
-	machine_halt ();
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "RPU", IRQ_RPU(0),	IRQ_RPU_NUM,	1, 6 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-/* An interrupt handler that copies the registers to a known memory location,
-   for debugging purposes.  */
-
-static void make_reg_snap (int irq, void *dummy, struct pt_regs *regs)
-{
-	(*(unsigned *)REG_DUMP_ADDR)++;
-	(*(struct pt_regs *)(REG_DUMP_ADDR + sizeof (unsigned))) = *regs;
-}
-
-static int reg_snap_dev_id;
-static struct irqaction reg_snap_action = {
-	.handler = make_reg_snap,
-	.mask = CPU_MASK_NONE,
-	.name = "reg_snap",
-	.dev_id = &reg_snap_dev_id,
-};
diff --git a/arch/v850/kernel/fpga85e2c.ld b/arch/v850/kernel/fpga85e2c.ld
deleted file mode 100644
index b5d4578ae41..00000000000
--- a/arch/v850/kernel/fpga85e2c.ld
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Linker script for the FPGA implementation of the V850E2 NA85E2C cpu core
-   (CONFIG_V850E2_FPGA85E2C).  */
-
-MEMORY {
-	/* Reset vector.  */
-	RESET	 : ORIGIN = 0, LENGTH = 0x10
-	/* Interrupt vectors.  */
-	INTV      : ORIGIN = 0x10, LENGTH = 0x470
-	/* The `window' in RAM were we're allowed to load stuff.  */
-	RAM_LOW   : ORIGIN = 0x480, LENGTH = 0x0005FB80
-	/* Some more ram above the window were we can put bss &c.  */
-	RAM_HIGH  : ORIGIN = 0x00060000, LENGTH = 0x000A0000
-	/* This is the area visible from the outside world (we can use
-	   this only for uninitialized data).  */
-	VISIBLE   : ORIGIN = 0x00200000, LENGTH = 0x00060000
-}
-
-SECTIONS {
-	.reset : {
-		__kram_start = . ;
-		__intv_start = . ;
-	        	*(.intv.reset)	/* Reset vector */
-	} > RESET
-
-	.ram_low : {
-		__r0_ram = . ;		/* Must be near address 0.  */
-		. = . + 32 ;
-
-		TEXT_CONTENTS
-		DATA_CONTENTS
-		ROOT_FS_CONTENTS
-		RAMK_INIT_CONTENTS_NO_END
-		INITRAMFS_CONTENTS
-	} > RAM_LOW
-
-        /* Where the interrupt vectors are initially loaded.  */
-	__intv_load_start = . ;
-
-	.intv : {
-			*(.intv.common)	/* Vectors common to all v850e proc. */
-			*(.intv.mach)	/* Machine-specific int. vectors.  */
-		__intv_end = . ;
-	} > INTV  AT> RAM_LOW
-
-	.ram_high : {
-		/* This is here so that when we free init memory the
-		   load-time copy of the interrupt vectors and any empty
-		   space at the end of the `RAM_LOW' area is freed too.  */
-		. = ALIGN (4096);
-		__init_end = . ;
-
-		BSS_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-	} > RAM_HIGH
-
-	.visible : {
-		_memcons_output = . ;
-		. = . + 0x8000 ;
-		_memcons_output_end = . ;
-	} > VISIBLE
-}
diff --git a/arch/v850/kernel/gbus_int.c b/arch/v850/kernel/gbus_int.c
deleted file mode 100644
index b2bcc251f65..00000000000
--- a/arch/v850/kernel/gbus_int.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * arch/v850/kernel/gbus_int.c -- Midas labs GBUS interrupt support
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-
-
-/* The number of shared GINT interrupts. */
-#define NUM_GINTS   	4
-
-/* For each GINT interrupt, how many GBUS interrupts are using it.  */
-static unsigned gint_num_active_irqs[NUM_GINTS] = { 0 };
-
-/* A table of GINTn interrupts we actually use.
-   Note that we don't use GINT0 because all the boards we support treat it
-   specially.  */
-struct used_gint {
-	unsigned gint;
-	unsigned priority;
-} used_gint[] = {
-	{ 1, GBUS_INT_PRIORITY_HIGH },
-	{ 3, GBUS_INT_PRIORITY_LOW }
-};
-#define NUM_USED_GINTS ARRAY_SIZE(used_gint)
-
-/* A table of which GINT is used by each GBUS interrupts (they are
-   assigned based on priority).  */
-static unsigned char gbus_int_gint[IRQ_GBUS_INT_NUM];
-
-
-/* Interrupt enabling/disabling.  */
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void gbus_int_enable_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		|= GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Disable interrupt handling for interrupt IRQ.  Note that any
-   interrupts received while disabled will be delivered once the
-   interrupt is enabled again, unless they are explicitly cleared using
-   `gbus_int_clear_pending_irq'.  */
-void gbus_int_disable_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		&= ~GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt handling for interrupt IRQ is enabled.  */
-int gbus_int_irq_enabled (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	return (GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		& GBUS_INT_IRQ_MASK(irq));
-}
-
-/* Disable all GBUS irqs.  */
-void gbus_int_disable_irqs ()
-{
-	unsigned w, n;
-	for (w = 0; w < GBUS_INT_NUM_WORDS; w++)
-		for (n = 0; n < IRQ_GINT_NUM; n++)
-			GBUS_INT_ENABLE (w, n) = 0;
-}
-
-/* Clear any pending interrupts for IRQ.  */
-void gbus_int_clear_pending_irq (unsigned irq)
-{
-	GBUS_INT_CLEAR (GBUS_INT_IRQ_WORD(irq)) = GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt IRQ is pending (but disabled).  */
-int gbus_int_irq_pending (unsigned irq)
-{
-	return (GBUS_INT_STATUS (GBUS_INT_IRQ_WORD(irq))
-		& GBUS_INT_IRQ_MASK(irq));
-}
-
-
-/* Delegating interrupts.  */
-
-/* Handle a shared GINT interrupt by passing to the appropriate GBUS
-   interrupt handler.  */
-static irqreturn_t gbus_int_handle_irq (int irq, void *dev_id,
-					struct pt_regs *regs)
-{
-	unsigned w;
-	irqreturn_t rval = IRQ_NONE;
-	unsigned gint = irq - IRQ_GINT (0);
-
-	for (w = 0; w < GBUS_INT_NUM_WORDS; w++) {
-		unsigned status = GBUS_INT_STATUS (w);
-		unsigned enable = GBUS_INT_ENABLE (w, gint);
-
-		/* Only pay attention to enabled interrupts.  */
-		status &= enable;
-		if (status) {
-			irq = IRQ_GBUS_INT (w * GBUS_INT_BITS_PER_WORD);
-			do {
-				/* There's an active interrupt in word
-				   W, find out which one, and call its
-				   handler.  */
-
-				while (! (status & 0x1)) {
-					irq++;
-					status >>= 1;
-				}
-				status &= ~0x1;
-
-				/* Recursively call handle_irq to handle it. */
-				handle_irq (irq, regs);
-				rval = IRQ_HANDLED;
-			} while (status);
-		}
-	}
-
-	/* Toggle the `all enable' bit back and forth, which should cause
-	   another edge transition if there are any other interrupts
-	   still pending, and so result in another CPU interrupt.  */
-	GBUS_INT_ENABLE (0, gint) &= ~0x1;
-	GBUS_INT_ENABLE (0, gint) |=  0x1;
-
-	return rval;
-}
-
-
-/* Initialize GBUS interrupt sources.  */
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned gbus_int_startup_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-	if (gint_num_active_irqs[gint] == 0) {
-		/* First enable the CPU interrupt.  */
-		int rval =
-			request_irq (IRQ_GINT(gint), gbus_int_handle_irq,
-				     IRQF_DISABLED,
-				     "gbus_int_handler",
-				     &gint_num_active_irqs[gint]);
-		if (rval != 0)
-			return rval;
-	}
-
-	gint_num_active_irqs[gint]++;
-
-	gbus_int_clear_pending_irq (irq);
-	gbus_int_enable_irq (irq);
-
-	return 0;
-}
-
-static void gbus_int_shutdown_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-	gbus_int_disable_irq (irq);
-
-	if (--gint_num_active_irqs[gint] == 0)
-		/* Disable the CPU interrupt.  */
-		free_irq (IRQ_GINT(gint), &gint_num_active_irqs[gint]);
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
-				     struct hw_interrupt_type *hw_irq_types)
-{
-	struct gbus_int_irq_init *init;
-	for (init = inits; init->name; init++) {
-		unsigned i;
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = gbus_int_startup_irq;
-		hwit->shutdown = gbus_int_shutdown_irq;
-		hwit->enable   = gbus_int_enable_irq;
-		hwit->disable  = gbus_int_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = irq_nop;
-		
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-		/* Set the interrupt priorities.  */
-		for (i = 0; i < init->num; i++) {
-			unsigned j;
-			for (j = 0; j < NUM_USED_GINTS; j++)
-				if (used_gint[j].priority > init->priority)
-					break;
-			/* Wherever we stopped looking is one past the
-			   GINT we want. */
-			gbus_int_gint[init->base + i * init->interval
-				      - GBUS_INT_BASE_IRQ]
-				= used_gint[j > 0 ? j - 1 : 0].gint;
-		}
-	}
-}
-
-
-/* Initialize IRQS.  */
-
-/* Chip interrupts (GINTn) shared among GBUS interrupts.  */
-static struct hw_interrupt_type gint_hw_itypes[NUM_USED_GINTS];
-
-
-/* GBUS interrupts themselves.  */
-
-struct gbus_int_irq_init gbus_irq_inits[] __initdata = {
-	/* First set defaults.  */
-	{ "GBUS_INT", IRQ_GBUS_INT(0), IRQ_GBUS_INT_NUM, 1, 6},
-	{ 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-
-/* Initialize GBUS interrupts.  */
-void __init gbus_int_init_irqs (void)
-{
-	unsigned i;
-
-	/* First initialize the shared gint interrupts.  */
-	for (i = 0; i < NUM_USED_GINTS; i++) {
-		unsigned gint = used_gint[i].gint;
-		struct v850e_intc_irq_init gint_irq_init[2];
-
-		/* We initialize one GINT interrupt at a time.  */
-		gint_irq_init[0].name = "GINT";
-		gint_irq_init[0].base = IRQ_GINT (gint);
-		gint_irq_init[0].num = 1;
-		gint_irq_init[0].interval = 1;
-		gint_irq_init[0].priority = used_gint[i].priority;
-
-		gint_irq_init[1].name = 0; /* Terminate the vector.  */
-
-		v850e_intc_init_irq_types (gint_irq_init, gint_hw_itypes);
-	}
-
-	/* Then the GBUS interrupts.  */
-	gbus_int_disable_irqs ();
-	gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-	/* Turn on the `all enable' bits, which are ANDed with
-	   individual interrupt enable bits; we only want to bother with
-	   the latter.  They are the first bit in the first word of each
-	   interrupt-enable area.  */
-	for (i = 0; i < NUM_USED_GINTS; i++)
-		GBUS_INT_ENABLE (0, used_gint[i].gint) = 0x1;
-}
diff --git a/arch/v850/kernel/head.S b/arch/v850/kernel/head.S
deleted file mode 100644
index c490b937ef1..00000000000
--- a/arch/v850/kernel/head.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/v850/kernel/head.S -- Lowest-level startup code
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/current.h>
-#include <asm/entry.h>
-#include <asm/thread_info.h>
-#include <asm/irq.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM	C_SYMBOL_NAME
-
-
-	.text
-
-	// Define `mach_early_init' as a weak symbol
-	.global	CSYM(mach_early_init)
-	.weak	CSYM(mach_early_init)
-
-C_ENTRY(start):
-	// Make sure interrupts are turned off, just in case
-	di
-
-#ifdef CONFIG_RESET_GUARD
-	// See if we got here via an unexpected reset
-	ld.w	RESET_GUARD, r19	// Check current value of reset guard
-	mov	RESET_GUARD_ACTIVE, r20
-	cmp	r19, r20
-	bne	1f			// Guard was not active
-
-	// If we get here, the reset guard was active.  Load up some
-	// interesting values as arguments, and jump to the handler.
-	st.w	r0, RESET_GUARD		// Allow further resets to succeed
-	mov	lp, r6			// Arg 0: return address
-	ld.b	KM, r7			// Arg 1: kernel mode
-	mov	sp, r9			// Arg 3: stack pointer
-	ld.w	KSP, r19		// maybe switch to kernel stack
-	cmp	r7, r0			// see if already in kernel mode
-	cmov	z, r19, sp, sp		//  and switch to kernel stack if not
-	GET_CURRENT_TASK(r8)		// Arg 2: task pointer
-	jr	CSYM(unexpected_reset)
-
-1:	st.w	r20, RESET_GUARD	// Turn on reset guard
-#endif /* CONFIG_RESET_GUARD */
-
-	// Setup a temporary stack for doing pre-initialization function calls.
-	// 
-	// We can't use the initial kernel stack, because (1) it may be
-	// located in memory we're not allowed to touch, and (2) since
-	// it's in the data segment, calling memcpy to initialize that
-	// area from ROM will overwrite memcpy's return address.
-	mov	hilo(CSYM(_init_stack_end) - 4), sp
-
-	// See if there's a platform-specific early-initialization routine
-	// defined; it's a weak symbol, so it will have an address of zero if
-	// there's not.
-	mov	hilo(CSYM(mach_early_init)), r6
-	cmp	r6, r0
-	bz	3f
-
-	// There is one, so call it.  If this function is written in C, it
-	// should be very careful -- the stack pointer is valid, but very
-	// little else is (e.g., bss is not zeroed yet, and initialized data
-	// hasn't been).
-	jarl	2f, lp			// first figure out return address
-2:	add	3f - ., lp
-	jmp	[r6]			// do call
-3:
-
-#ifdef CONFIG_ROM_KERNEL
-	// Copy the data area from ROM to RAM
-	mov	hilo(CSYM(_rom_copy_dst_start)), r6
-	mov	hilo(CSYM(_rom_copy_src_start)), r7
-	mov	hilo(CSYM(_rom_copy_dst_end)), r8
-	sub	r6, r8
-	jarl	CSYM(memcpy), lp
-#endif
-
-	// Load the initial thread's stack, and current task pointer (in r16)
-	mov	hilo(CSYM(init_thread_union)), r19
-	movea	THREAD_SIZE, r19, sp
-	ld.w	TI_TASK[r19], CURRENT_TASK
-
-#ifdef CONFIG_TIME_BOOTUP
-	/* This stuff must come after mach_early_init, because interrupts may
-	   not work until after its been called.  */
-	jarl	CSYM(highres_timer_reset), lp
-	jarl	CSYM(highres_timer_start), lp
-#endif
-
-	// Kernel stack pointer save location
-	st.w	sp, KSP
-
-	// Assert that we're in `kernel mode'
-	mov	1, r19
-	st.w	r19, KM
-
-#ifdef CONFIG_ZERO_BSS
-	// Zero bss area, since we can't rely upon any loader to do so
-	mov	hilo(CSYM(_sbss)), r6
-	mov	r0, r7
-	mov	hilo(CSYM(_ebss)), r8
-	sub	r6, r8
-	jarl	CSYM(memset), lp
-#endif
-
-	// What happens if the main kernel function returns (it shouldn't)
-	mov	hilo(CSYM(machine_halt)), lp
-
-	// Start the linux kernel.  We use an indirect jump to get extra
-	// range, because on some platforms this initial startup code
-	// (and the associated platform-specific code in mach_early_init)
-	// are located far away from the main kernel, e.g. so that they
-	// can initialize RAM first and copy the kernel or something.
-	mov	hilo(CSYM(start_kernel)), r12
-	jmp	[r12]
-C_END(start)
diff --git a/arch/v850/kernel/highres_timer.c b/arch/v850/kernel/highres_timer.c
deleted file mode 100644
index b16ad1eaf96..00000000000
--- a/arch/v850/kernel/highres_timer.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/v850/kernel/highres_timer.c -- High resolution timing routines
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/system.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/highres_timer.h>
-
-#define HIGHRES_TIMER_USEC_SHIFT   12
-
-/* Pre-calculated constant used for converting ticks to real time
-   units.  We initialize it to prevent it being put into BSS.  */
-static u32 highres_timer_usec_prescale = 1;
-
-void highres_timer_slow_tick_irq (void) __attribute__ ((noreturn));
-void highres_timer_slow_tick_irq (void)
-{
-	/* This is an interrupt handler, so it must be very careful to
-	   not to trash any registers.  At this point, the stack-pointer
-	   (r3) has been saved in the chip ram location ENTRY_SP by the
-	   interrupt vector, so we can use it as a scratch register; we
-	   must also restore it before returning.  */
-	asm ("ld.w	%0[r0], sp;"
-	     "add	1, sp;"
-	     "st.w	sp, %0[r0];"
-	     "ld.w	%1[r0], sp;" /* restore pre-irq stack-pointer */
-	     "reti"
-	     ::
-	      "i" (HIGHRES_TIMER_SLOW_TICKS_ADDR),
-	      "i" (ENTRY_SP_ADDR)
-	     : "memory");
-}
-
-void highres_timer_reset (void)
-{
-	V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT) = 0;
-	HIGHRES_TIMER_SLOW_TICKS = 0;
-}
-
-void highres_timer_start (void)
-{
-	u32 fast_tick_rate;
-
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (HIGHRES_TIMER_TIMER_D_UNIT,
-				 HIGHRES_TIMER_SLOW_TICK_RATE);
-
-	fast_tick_rate =
-		(V850E_TIMER_D_BASE_FREQ
-		 >> V850E_TIMER_D_DIVLOG2 (HIGHRES_TIMER_TIMER_D_UNIT));
-
-	/* The obvious way of calculating microseconds from fast ticks
-	   is to do:
-
-	     usec = fast_ticks * 10^6 / fast_tick_rate
-
-	   However, divisions are much slower than multiplications, and
-	   the above calculation can overflow, so we do this instead:
-
-	     usec = fast_ticks * (10^6 * 2^12 / fast_tick_rate) / 2^12
-
-           since we can pre-calculate (10^6 * (2^12 / fast_tick_rate))
-	   and use a shift for dividing by 2^12, this avoids division,
-	   and is almost as accurate (it differs by about 2 microseconds
-	   at the extreme value of the fast-tick counter's ranger).  */
-	highres_timer_usec_prescale = ((1000000 << HIGHRES_TIMER_USEC_SHIFT)
-				       / fast_tick_rate);
-
-	/* Enable the interrupt (which is hardwired to this use), and
-	   give it the highest priority.  */
-	V850E_INTC_IC (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)) = 0;
-}
-
-void highres_timer_stop (void)
-{
-	/* Stop the timer.  */
-	V850E_TIMER_D_TMCD (HIGHRES_TIMER_TIMER_D_UNIT) =
-		V850E_TIMER_D_TMCD_CAE;
-	/* Disable its interrupt, just in case.  */
-	v850e_intc_disable_irq (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT));
-}
-
-inline void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks)
-{
-	int flags;
-	u32 fast_ticks_1, fast_ticks_2, _slow_ticks;
-
-	local_irq_save (flags);
-	fast_ticks_1 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-	_slow_ticks = HIGHRES_TIMER_SLOW_TICKS;
-	fast_ticks_2 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-	local_irq_restore (flags);
-
-	if (fast_ticks_2 < fast_ticks_1)
-		_slow_ticks++;
-
-	*slow_ticks = _slow_ticks;
-	*fast_ticks = fast_ticks_2;
-}
-
-inline void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
-					    struct timeval *tv)
-{
-	unsigned long sec, sec_rem, usec;
-
-	usec = ((fast_ticks * highres_timer_usec_prescale)
-		>> HIGHRES_TIMER_USEC_SHIFT);
-
-	sec = slow_ticks / HIGHRES_TIMER_SLOW_TICK_RATE;
-	sec_rem = slow_ticks % HIGHRES_TIMER_SLOW_TICK_RATE;
-
-	usec += sec_rem * (1000000 / HIGHRES_TIMER_SLOW_TICK_RATE);
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-void highres_timer_read (struct timeval *tv)
-{
-	u32 fast_ticks, slow_ticks;
-	highres_timer_read_ticks (&slow_ticks, &fast_ticks);
-	highres_timer_ticks_to_timeval (slow_ticks, fast_ticks, tv);
-}
diff --git a/arch/v850/kernel/init_task.c b/arch/v850/kernel/init_task.c
deleted file mode 100644
index 44b274dff33..00000000000
--- a/arch/v850/kernel/init_task.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/v850/kernel/init_task.c -- Initial task/thread structures
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-
-static struct fs_struct init_fs = INIT_FS;
-static struct signal_struct init_signals = INIT_SIGNALS (init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM (init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK (init_task);
-
-EXPORT_SYMBOL(init_task);
-
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry.
- */
-union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/v850/kernel/intv.S b/arch/v850/kernel/intv.S
deleted file mode 100644
index 671e4c6150d..00000000000
--- a/arch/v850/kernel/intv.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * arch/v850/kernel/intv.S -- Interrupt vectors
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/entry.h>
-
-#ifdef CONFIG_V850E_HIGHRES_TIMER
-#include <asm/highres_timer.h>
-#endif
-
-/* Jump to an interrupt/trap handler.  These handlers (defined in entry.S)
-   expect the stack-pointer to be saved in ENTRY_SP, so we use sp to do an
-   indirect jump (which avoids problems when the handler is more than a signed
-   22-bit offset away).  */
-#define JUMP_TO_HANDLER(name, sp_save_loc)				      \
-	st.w	sp, sp_save_loc;					      \
-	mov	hilo(name), sp;						      \
-	jmp	[sp]
-
-
-	/* Reset vector.  */
-	.section	.intv.reset, "ax"
-	.org	0x0
-	mov	hilo(C_SYMBOL_NAME(start)), r1;
-	jmp	[r1]
-
-
-	/* Generic interrupt vectors.  */
-	.section	.intv.common, "ax"
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x10 - NMI0
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x20 - NMI1
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x30 - NMI2
-	
-	.balign	0x10
-	JUMP_TO_HANDLER (trap, ENTRY_SP)	// 0x40 - TRAP0n
-	.balign	0x10
-	JUMP_TO_HANDLER (trap, ENTRY_SP)	// 0x50 - TRAP1n
-
-	.balign	0x10
-	JUMP_TO_HANDLER (dbtrap, ENTRY_SP)	// 0x60 - Illegal op / DBTRAP insn
-
-
-	/* Hardware interrupt vectors.  */
-	.section	.intv.mach, "ax"
-	.org	0x0
-
-#if defined (CONFIG_V850E_HIGHRES_TIMER) && defined (IRQ_INTCMD)
-
-	/* Interrupts before the highres timer interrupt.  */
-	.rept	IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-	/* The highres timer interrupt.  */
-	.balign	0x10
-	JUMP_TO_HANDLER (C_SYMBOL_NAME (highres_timer_slow_tick_irq), ENTRY_SP)
-
-	/* Interrupts after the highres timer interrupt.  */
-	.rept	NUM_CPU_IRQS - IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT) - 1
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-#else /* No highres timer */
-
-	.rept	NUM_CPU_IRQS
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-#endif /* Highres timer */
diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c
deleted file mode 100644
index 858c45819aa..00000000000
--- a/arch/v850/kernel/irq.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/v850/kernel/irq.c -- High-level interrupt handling
- *
- *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1994-2000  Ralf Baechle
- *  Copyright (C) 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was was derived from the mips version, arch/mips/kernel/irq.c
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/random.h>
-#include <linux/seq_file.h>
-
-#include <asm/system.h>
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk("received IRQ %d with unknown interrupt type\n", irq);
-}
-
-volatile unsigned long irq_err_count, spurious_count;
-
-/*
- * Generic, controller-independent functions:
- */
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int irq = *(loff_t *) v;
-
-	if (irq == 0) {
-		int cpu;
-		seq_puts(p, "           ");
-		for (cpu=0; cpu < 1 /*smp_num_cpus*/; cpu++)
-			seq_printf(p, "CPU%d       ", cpu);
-		seq_putc(p, '\n');
-	}
-
-	if (irq < NR_IRQS) {
-		unsigned long flags;
-		struct irqaction *action;
-
-		spin_lock_irqsave(&irq_desc[irq].lock, flags);
-
-		action = irq_desc[irq].action;
-		if (action) {
-			int j;
-			int count = 0;
-			int num = -1;
-			const char *type_name = irq_desc[irq].chip->typename;
-
-			for (j = 0; j < NR_IRQS; j++)
-				if (irq_desc[j].chip->typename == type_name){
-					if (irq == j)
-						num = count;
-					count++;
-				}
-
-			seq_printf(p, "%3d: ",irq);
-			seq_printf(p, "%10u ", kstat_irqs(irq));
-			if (count > 1) {
-				int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
-				seq_printf(p, " %*s%d", 14 - prec,
-					   type_name, num);
-			} else
-				seq_printf(p, " %14s", type_name);
-		
-			seq_printf(p, "  %s", action->name);
-			for (action=action->next; action; action = action->next)
-				seq_printf(p, ", %s", action->name);
-			seq_putc(p, '\n');
-		}
-
-		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
-	} else if (irq == NR_IRQS)
-		seq_printf(p, "ERR: %10lu\n", irq_err_count);
-
-	return 0;
-}
-
-/* Handle interrupt IRQ.  REGS are the registers at the time of ther
-   interrupt.  */
-unsigned int handle_irq (int irq, struct pt_regs *regs)
-{
-	irq_enter();
-	__do_IRQ(irq, regs);
-	irq_exit();
-	return 1;
-}
-
-/* Initialize irq handling for IRQs.
-   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
-   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
-void __init
-init_irq_handlers (int base_irq, int num, int interval,
-		   struct hw_interrupt_type *irq_type)
-{
-	while (num-- > 0) {
-		irq_desc[base_irq].status  = IRQ_DISABLED;
-		irq_desc[base_irq].action  = NULL;
-		irq_desc[base_irq].depth   = 1;
-		irq_desc[base_irq].chip = irq_type;
-		base_irq += interval;
-	}
-}
diff --git a/arch/v850/kernel/ma.c b/arch/v850/kernel/ma.c
deleted file mode 100644
index 143774de75e..00000000000
--- a/arch/v850/kernel/ma.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/v850/kernel/ma.c -- V850E/MA series of cpu chips
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM,	1, 2 },
-	{ "CSI", IRQ_INTCSI(0), IRQ_INTCSI_NUM,	4, 4 },
-	{ "SER", IRQ_INTSER(0), IRQ_INTSER_NUM,	4, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	4, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	4, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init ma_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void ma_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* We only know about the first two UART channels (though
-	   specific chips may have more).  */
-	if (chan < 2) {
-		unsigned bits = 0x3 << (chan * 3);
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		MA_PORT4_PMC |= bits;
-		/* Specify that we're using the UART, not the CSI device.  */
-		MA_PORT4_PFC |= bits;
-	}
-}
diff --git a/arch/v850/kernel/mach.c b/arch/v850/kernel/mach.c
deleted file mode 100644
index b9db278d2b7..00000000000
--- a/arch/v850/kernel/mach.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/v850/kernel/mach.c -- Defaults for some things defined by "mach.h"
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-/* Called with each timer tick, if non-zero.  */
-void (*mach_tick)(void) = 0;
diff --git a/arch/v850/kernel/mach.h b/arch/v850/kernel/mach.h
deleted file mode 100644
index 9e0e4816ec5..00000000000
--- a/arch/v850/kernel/mach.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/v850/kernel/mach.h -- Machine-dependent functions used by v850 port
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MACH_H__
-#define __V850_MACH_H__
-
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-
-#include <asm/ptrace.h>
-#include <asm/entry.h>
-#include <asm/clinkage.h>
-
-void mach_setup (char **cmdline);
-void mach_gettimeofday (struct timespec *tv);
-void mach_sched_init (struct irqaction *timer_action);
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len);
-void mach_init_irqs (void);
-
-/* If defined, is called very early in the kernel initialization.  The
-   stack pointer is valid, but very little has been initialized (e.g.,
-   bss is not zeroed yet) when this is called, so care must taken.  */
-void mach_early_init (void);
-
-/* If defined, called after the bootmem allocator has been initialized,
-   to allow the platform-dependent code to reserve any areas of RAM that
-   the kernel shouldn't touch.  */
-void mach_reserve_bootmem (void) __attribute__ ((__weak__));
-
-/* Called with each timer tick, if non-zero.  */
-extern void (*mach_tick) (void);
-
-/* The following establishes aliases for various mach_ functions to the
-   name by which the rest of the kernel calls them.  These statements
-   should only have an effect in the file that defines the actual functions. */
-#define MACH_ALIAS(to, from)						      \
-   asm (".global " macrology_stringify (C_SYMBOL_NAME (to)) ";"		      \
-	macrology_stringify (C_SYMBOL_NAME (to))			      \
-	" = " macrology_stringify (C_SYMBOL_NAME (from)))
-/* e.g.: MACH_ALIAS (kernel_name,	arch_spec_name);  */
-
-#endif /* __V850_MACH_H__ */
diff --git a/arch/v850/kernel/me2.c b/arch/v850/kernel/me2.c
deleted file mode 100644
index 007115dc9ce..00000000000
--- a/arch/v850/kernel/me2.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/v850/kernel/me2.c -- V850E/ME2 chip-specific support
- *
- *  Copyright (C) 2003  NEC Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ",    0,                NUM_CPU_IRQS,      1, 7 },
-	{ "INTP",   IRQ_INTP(0),      IRQ_INTP_NUM,      1, 5 },
-	{ "CMD",    IRQ_INTCMD(0),    IRQ_INTCMD_NUM,    1, 3 },
-	{ "UBTIRE", IRQ_INTUBTIRE(0), IRQ_INTUBTIRE_NUM, 5, 4 },
-	{ "UBTIR",  IRQ_INTUBTIR(0),  IRQ_INTUBTIR_NUM,  5, 4 },
-	{ "UBTIT",  IRQ_INTUBTIT(0),  IRQ_INTUBTIT_NUM,  5, 4 },
-	{ "UBTIF",  IRQ_INTUBTIF(0),  IRQ_INTUBTIF_NUM,  5, 4 },
-	{ "UBTITO", IRQ_INTUBTITO(0), IRQ_INTUBTITO_NUM, 5, 4 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize V850E/ME2 chip interrupts.  */
-void __init me2_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	if (chan == 0) {
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		ME2_PORT1_PMC |= 0xC;
-		/* Specify that we're using the UART, not the CSI device. */
-		ME2_PORT1_PFC |= 0xC;
-	} else if (chan == 1) {
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		ME2_PORT2_PMC |= 0x6;
-		/* Specify that we're using the UART, not the CSI device. */
-		ME2_PORT2_PFC |= 0x6;
-	}
-}
diff --git a/arch/v850/kernel/memcons.c b/arch/v850/kernel/memcons.c
deleted file mode 100644
index 92f514fdcc7..00000000000
--- a/arch/v850/kernel/memcons.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * arch/v850/kernel/memcons.c -- Console I/O to a memory buffer
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-/* If this device is enabled, the linker map should define start and
-   end points for its buffer. */
-extern char memcons_output[], memcons_output_end;
-
-/* Current offset into the buffer.  */
-static unsigned long memcons_offs = 0;
-
-/* Spinlock protecting memcons_offs.  */
-static DEFINE_SPINLOCK(memcons_lock);
-
-
-static size_t write (const char *buf, size_t len)
-{
-	unsigned long flags;
-	char *point;
-
-	spin_lock_irqsave (memcons_lock, flags);
-
-	point = memcons_output + memcons_offs;
-	if (point + len >= &memcons_output_end) {
-		len = &memcons_output_end - point;
-		memcons_offs = 0;
-	} else
-		memcons_offs += len;
-
-	spin_unlock_irqrestore (memcons_lock, flags);
-
-	memcpy (point, buf, len);
-
-	return len;
-}
-
-
-/*  Low-level console. */
-
-static void memcons_write (struct console *co, const char *buf, unsigned len)
-{
-	while (len > 0)
-		len -= write (buf, len);
-}
-
-static struct tty_driver *tty_driver;
-
-static struct tty_driver *memcons_device (struct console *co, int *index)
-{
-	*index = co->index;
-	return tty_driver;
-}
-
-static struct console memcons =
-{
-    .name	= "memcons",
-    .write	= memcons_write,
-    .device	= memcons_device,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-void memcons_setup (void)
-{
-	register_console (&memcons);
-	printk (KERN_INFO "Console: static memory buffer (memcons)\n");
-}
-
-/* Higher level TTY interface.  */
-
-int memcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-int memcons_tty_write (struct tty_struct *tty, const unsigned char *buf, int len)
-{
-	return write (buf, len);
-}
-
-int memcons_tty_write_room (struct tty_struct *tty)
-{
-	return &memcons_output_end - (memcons_output + memcons_offs);
-}
-
-int memcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-	/* We have no buffer.  */
-	return 0;
-}
-
-static const struct tty_operations ops = {
-	.open = memcons_tty_open,
-	.write = memcons_tty_write,
-	.write_room = memcons_tty_write_room,
-	.chars_in_buffer = memcons_tty_chars_in_buffer,
-};
-
-int __init memcons_tty_init (void)
-{
-	int err;
-	struct tty_driver *driver = alloc_tty_driver(1);
-	if (!driver)
-		return -ENOMEM;
-
-	driver->name = "memcons";
-	driver->major = TTY_MAJOR;
-	driver->minor_start = 64;
-	driver->type = TTY_DRIVER_TYPE_SYSCONS;
-	driver->init_termios = tty_std_termios;
-	tty_set_operations(driver, &ops);
-	err = tty_register_driver(driver);
-	if (err) {
-		put_tty_driver(driver);
-		return err;
-	}
-	tty_driver = driver;
-	return 0;
-}
-__initcall (memcons_tty_init);
diff --git a/arch/v850/kernel/module.c b/arch/v850/kernel/module.c
deleted file mode 100644
index 64aeb3e37c5..00000000000
--- a/arch/v850/kernel/module.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * arch/v850/kernel/module.c -- Architecture-specific module functions
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 2001,03  Rusty Russell
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- *
- * Derived in part from arch/ppc/kernel/module.c
- */
-
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt , ...)
-#endif
-
-void *module_alloc (unsigned long size)
-{
-	return size == 0 ? 0 : vmalloc (size);
-}
-
-void module_free (struct module *mod, void *module_region)
-{
-	vfree (module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-int module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-		     struct module *mod)
-{
-	return 0;
-}
-
-/* Count how many different relocations (different symbol, different
-   addend) */
-static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
-{
-	unsigned int i, j, ret = 0;
-
-	/* Sure, this is order(n^2), but it's usually short, and not
-           time critical */
-	for (i = 0; i < num; i++) {
-		for (j = 0; j < i; j++) {
-			/* If this addend appeared before, it's
-                           already been counted */
-			if (ELF32_R_SYM(rela[i].r_info)
-			    == ELF32_R_SYM(rela[j].r_info)
-			    && rela[i].r_addend == rela[j].r_addend)
-				break;
-		}
-		if (j == i) ret++;
-	}
-	return ret;
-}
-
-/* Get the potential trampolines size required of the init and
-   non-init sections */
-static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
-				  const Elf32_Shdr *sechdrs,
-				  const char *secstrings,
-				  int is_init)
-{
-	unsigned long ret = 0;
-	unsigned i;
-
-	/* Everything marked ALLOC (this includes the exported
-           symbols) */
-	for (i = 1; i < hdr->e_shnum; i++) {
-		/* If it's called *.init*, and we're not init, we're
-                   not interested */
-		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-		    != is_init)
-			continue;
-
-		if (sechdrs[i].sh_type == SHT_RELA) {
-			DEBUGP("Found relocations in section %u\n", i);
-			DEBUGP("Ptr: %p.  Number: %u\n",
-			       (void *)hdr + sechdrs[i].sh_offset,
-			       sechdrs[i].sh_size / sizeof(Elf32_Rela));
-			ret += count_relocs((void *)hdr
-					     + sechdrs[i].sh_offset,
-					     sechdrs[i].sh_size
-					     / sizeof(Elf32_Rela))
-				* sizeof(struct v850_plt_entry);
-		}
-	}
-
-	return ret;
-}
-
-int module_frob_arch_sections(Elf32_Ehdr *hdr,
-			      Elf32_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *me)
-{
-	unsigned int i;
-
-	/* Find .plt and .pltinit sections */
-	for (i = 0; i < hdr->e_shnum; i++) {
-		if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0)
-			me->arch.init_plt_section = i;
-		else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
-			me->arch.core_plt_section = i;
-	}
-	if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
-		printk("Module doesn't contain .plt or .plt.init sections.\n");
-		return -ENOEXEC;
-	}
-
-	/* Override their sizes */
-	sechdrs[me->arch.core_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 0);
-	sechdrs[me->arch.init_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 1);
-	return 0;
-}
-
-int apply_relocate (Elf32_Shdr *sechdrs, const char *strtab,
-		    unsigned int symindex, unsigned int relsec,
-		    struct module *mod)
-{
-	printk ("Barf\n");
-	return -ENOEXEC;
-}
-
-/* Set up a trampoline in the PLT to bounce us to the distant function */
-static uint32_t do_plt_call (void *location, Elf32_Addr val,
-			     Elf32_Shdr *sechdrs, struct module *mod)
-{
-	struct v850_plt_entry *entry;
-	/* Instructions used to do the indirect jump.  */
-	uint32_t tramp[2];
-
-	/* We have to trash a register, so we assume that any control
-	   transfer more than 21-bits away must be a function call
-	   (so we can use a call-clobbered register).  */
-	tramp[0] = 0x0621 + ((val & 0xffff) << 16);   /* mov sym, r1 ... */
-	tramp[1] = ((val >> 16) & 0xffff) + 0x610000; /* ...; jmp r1 */
-
-	/* Init, or core PLT? */
-	if (location >= mod->module_core
-	    && location < mod->module_core + mod->core_size)
-		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
-	else
-		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
-
-	/* Find this entry, or if that fails, the next avail. entry */
-	while (entry->tramp[0])
-		if (entry->tramp[0] == tramp[0] && entry->tramp[1] == tramp[1])
-			return (uint32_t)entry;
-		else
-			entry++;
-
-	entry->tramp[0] = tramp[0];
-	entry->tramp[1] = tramp[1];
-
-	return (uint32_t)entry;
-}
-
-int apply_relocate_add (Elf32_Shdr *sechdrs, const char *strtab,
-			unsigned int symindex, unsigned int relsec,
-			struct module *mod)
-{
-	unsigned int i;
-	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-
-	DEBUGP ("Applying relocate section %u to %u\n", relsec,
-		sechdrs[relsec].sh_info);
-
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof (*rela); i++) {
-		/* This is where to make the change */
-		uint32_t *loc
-			= ((void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			   + rela[i].r_offset);
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		Elf32_Sym *sym
-			= ((Elf32_Sym *)sechdrs[symindex].sh_addr
-			   + ELF32_R_SYM (rela[i].r_info));
-		uint32_t val = sym->st_value + rela[i].r_addend;
-
-		switch (ELF32_R_TYPE (rela[i].r_info)) {
-		case R_V850_32:
-			/* We write two shorts instead of a long because even
-			   32-bit insns only need half-word alignment, but
-			   32-bit data writes need to be long-word aligned.  */
-			val += ((uint16_t *)loc)[0];
-			val += ((uint16_t *)loc)[1] << 16;
-			((uint16_t *)loc)[0] = val & 0xffff;
-			((uint16_t *)loc)[1] = (val >> 16) & 0xffff;
-			break;
-
-		case R_V850_22_PCREL:
-			/* Maybe jump indirectly via a PLT table entry.  */
-			if ((int32_t)(val - (uint32_t)loc) > 0x1fffff
-			    || (int32_t)(val - (uint32_t)loc) < -0x200000)
-				val = do_plt_call (loc, val, sechdrs, mod);
-
-			val -= (uint32_t)loc;
-
-			/* We write two shorts instead of a long because
-			   even 32-bit insns only need half-word alignment,
-			   but 32-bit data writes need to be long-word
-			   aligned.  */
-			((uint16_t *)loc)[0] =
-				(*(uint16_t *)loc & 0xffc0) /* opcode + reg */
-				| ((val >> 16) & 0xffc03f); /* offs high */
-			((uint16_t *)loc)[1] =
-				(val & 0xffff);		    /* offs low */
-			break;
-
-		default:
-			printk (KERN_ERR "module %s: Unknown reloc: %u\n",
-				mod->name, ELF32_R_TYPE (rela[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-
-	return 0;
-}
-
-void
-module_arch_cleanup(struct module *mod)
-{
-}
diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c
deleted file mode 100644
index e4a4b8e7d5a..00000000000
--- a/arch/v850/kernel/process.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * arch/v850/kernel/process.c -- Arch-dependent process handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/reboot.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-extern void ret_from_fork (void);
-
-
-/* The idle loop.  */
-static void default_idle (void)
-{
-	while (! need_resched ())
-		asm ("halt; nop; nop; nop; nop; nop" ::: "cc");
-}
-
-void (*idle)(void) = default_idle;
-
-/*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-void cpu_idle (void)
-{
-	/* endless idle loop with no priority at all */
-	while (1) {
-		while (!need_resched())
-			(*idle) ();
-
-		preempt_enable_no_resched();
-		schedule();
-		preempt_disable();
-	}
-}
-
-/*
- * This is the mechanism for creating a new kernel thread.
- *
- * NOTE! Only a kernel-only process (ie the swapper or direct descendants who
- * haven't done an "execve()") should use this: it will work within a system
- * call from a "real" process, but the process memory space will not be free'd
- * until both the parent and the child have exited.
- */
-int kernel_thread (int (*fn)(void *), void *arg, unsigned long flags)
-{
-	register mm_segment_t fs = get_fs ();
-	register unsigned long syscall asm (SYSCALL_NUM);
-	register unsigned long arg0 asm (SYSCALL_ARG0);
-	register unsigned long ret asm (SYSCALL_RET);
-
-	set_fs (KERNEL_DS);
-
-	/* Clone this thread.  Note that we don't pass the clone syscall's
-	   second argument -- it's ignored for calls from kernel mode (the
-	   child's SP is always set to the top of the kernel stack).  */
-	arg0 = flags | CLONE_VM;
-	syscall = __NR_clone;
-	asm volatile ("trap " SYSCALL_SHORT_TRAP
-		      : "=r" (ret), "=r" (syscall)
-		      : "1" (syscall), "r" (arg0)
-		      : SYSCALL_SHORT_CLOBBERS);
-
-	if (ret == 0) {
-		/* In child thread, call FN and exit.  */
-		arg0 = (*fn) (arg);
-		syscall = __NR_exit;
-		asm volatile ("trap " SYSCALL_SHORT_TRAP
-			      : "=r" (ret), "=r" (syscall)
-			      : "1" (syscall), "r" (arg0)
-			      : SYSCALL_SHORT_CLOBBERS);
-	}
-
-	/* In parent.  */
-	set_fs (fs);
-
-	return ret;
-}
-
-void flush_thread (void)
-{
-	set_fs (USER_DS);
-}
-
-int copy_thread (int nr, unsigned long clone_flags,
-		 unsigned long stack_start, unsigned long stack_size,
-		 struct task_struct *p, struct pt_regs *regs)
-{
-	/* Start pushing stuff from the top of the child's kernel stack.  */
-	unsigned long orig_ksp = task_tos(p);
-	unsigned long ksp = orig_ksp;
-	/* We push two `state save' stack fames (see entry.S) on the new
-	   kernel stack:
-	     1) The innermost one is what switch_thread would have
-	        pushed, and is used when we context switch to the child
-		thread for the first time.  It's set up to return to
-		ret_from_fork in entry.S.
-	     2) The outermost one (nearest the top) is what a syscall
-	        trap would have pushed, and is set up to return to the
-		same location as the parent thread, but with a return
-		value of 0. */
-	struct pt_regs *child_switch_regs, *child_trap_regs;
-
-	/* Trap frame.  */
-	ksp -= STATE_SAVE_SIZE;
-	child_trap_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-	/* Switch frame.  */
-	ksp -= STATE_SAVE_SIZE;
-	child_switch_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-
-	/* First copy parent's register state to child.  */
-	*child_switch_regs = *regs;
-	*child_trap_regs = *regs;
-
-	/* switch_thread returns to the restored value of the lp
-	   register (r31), so we make that the place where we want to
-	   jump when the child thread begins running.  */
-	child_switch_regs->gpr[GPR_LP] = (v850_reg_t)ret_from_fork;
-
-	if (regs->kernel_mode)
-		/* Since we're returning to kernel-mode, make sure the child's
-		   stored kernel stack pointer agrees with what the actual
-		   stack pointer will be at that point (the trap return code
-		   always restores the SP, even when returning to
-		   kernel-mode).  */
-		child_trap_regs->gpr[GPR_SP] = orig_ksp;
-	else
-		/* Set the child's user-mode stack-pointer (the name
-		   `stack_start' is a misnomer, it's just the initial SP
-		   value).  */
-		child_trap_regs->gpr[GPR_SP] = stack_start;
-
-	/* Thread state for the child (everything else is on the stack).  */
-	p->thread.ksp = ksp;
-
-	return 0;
-}
-
-/*
- * sys_execve() executes a new program.
- */
-int sys_execve (char *name, char **argv, char **envp, struct pt_regs *regs)
-{
-	char *filename = getname (name);
-	int error = PTR_ERR (filename);
-
-	if (! IS_ERR (filename)) {
-		error = do_execve (filename, argv, envp, regs);
-		putname (filename);
-	}
-
-	return error;
-}
-
-
-/*
- * These bracket the sleeping functions..
- */
-#define first_sched	((unsigned long)__sched_text_start)
-#define last_sched	((unsigned long)__sched_text_end)
-
-unsigned long get_wchan (struct task_struct *p)
-{
-#if 0  /* Barf.  Figure out the stack-layout later.  XXX  */
-	unsigned long fp, pc;
-	int count = 0;
-
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	pc = thread_saved_pc (p);
-
-	/* This quite disgusting function walks up the stack, following
-	   saved return address, until it something that's out of bounds
-	   (as defined by `first_sched' and `last_sched').  It then
-	   returns the last PC that was in-bounds.  */
-	do {
-		if (fp < stack_page + sizeof (struct task_struct) ||
-		    fp >= 8184+stack_page)
-			return 0;
-		pc = ((unsigned long *)fp)[1];
-		if (pc < first_sched || pc >= last_sched)
-			return pc;
-		fp = *(unsigned long *) fp;
-	} while (count++ < 16);
-#endif
-
-	return 0;
-}
diff --git a/arch/v850/kernel/procfs.c b/arch/v850/kernel/procfs.c
deleted file mode 100644
index e433cde789b..00000000000
--- a/arch/v850/kernel/procfs.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/v850/kernel/procfs.c -- Introspection functions for /proc filesystem
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-static int cpuinfo_print (struct seq_file *m, void *v)
-{
-	extern unsigned long loops_per_jiffy;
-	
-	seq_printf (m, "CPU-Family:	v850\nCPU-Arch:	%s\n", CPU_ARCH);
-
-#ifdef CPU_MODEL_LONG
-	seq_printf (m, "CPU-Model:	%s (%s)\n", CPU_MODEL, CPU_MODEL_LONG);
-#else
-	seq_printf (m, "CPU-Model:	%s\n", CPU_MODEL);
-#endif
-
-#ifdef CPU_CLOCK_FREQ
-	seq_printf (m, "CPU-Clock:	%ld (%ld MHz)\n",
-		    (long)CPU_CLOCK_FREQ,
-		    (long)CPU_CLOCK_FREQ / 1000000);
-#endif
-
-	seq_printf (m, "BogoMips:	%lu.%02lu\n",
-		    loops_per_jiffy/(500000/HZ),
-		    (loops_per_jiffy/(5000/HZ)) % 100);
-
-#ifdef PLATFORM_LONG
-	seq_printf (m, "Platform:	%s (%s)\n", PLATFORM, PLATFORM_LONG);
-#elif defined (PLATFORM)
-	seq_printf (m, "Platform:	%s\n", PLATFORM);
-#endif
-
-	return 0;
-}
-
-static void *cpuinfo_start (struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *cpuinfo_next (struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return cpuinfo_start (m, pos);
-}
-
-static void cpuinfo_stop (struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= cpuinfo_start,
-	.next	= cpuinfo_next,
-	.stop	= cpuinfo_stop,
-	.show	= cpuinfo_print
-};
diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c
deleted file mode 100644
index a458ac941b2..00000000000
--- a/arch/v850/kernel/ptrace.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * arch/v850/kernel/ptrace.c -- `ptrace' system call
- *
- *  Copyright (C) 2002,03,04  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04  Miles Bader <miles@gnu.org>
- *
- * Derived from arch/mips/kernel/ptrace.c:
- *
- *  Copyright (C) 1992 Ross Biro
- *  Copyright (C) Linus Torvalds
- *  Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
- *  Copyright (C) 1996 David S. Miller
- *  Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- *  Copyright (C) 1999 MIPS Technologies, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-/* Returns the address where the register at REG_OFFS in P is stashed away.  */
-static v850_reg_t *reg_save_addr (unsigned reg_offs, struct task_struct *t)
-{
-	struct pt_regs *regs;
-
-	/* Three basic cases:
-
-	   (1) A register normally saved before calling the scheduler, is
-	       available in the kernel entry pt_regs structure at the top
-	       of the kernel stack.  The kernel trap/irq exit path takes
-	       care to save/restore almost all registers for ptrace'd
-	       processes.
-
-	   (2) A call-clobbered register, where the process P entered the
-	       kernel via [syscall] trap, is not stored anywhere; that's
-	       OK, because such registers are not expected to be preserved
-	       when the trap returns anyway (so we don't actually bother to
-	       test for this case).
-
-	   (3) A few registers not used at all by the kernel, and so
-	       normally never saved except by context-switches, are in the
-	       context switch state.  */
-
-	if (reg_offs == PT_CTPC || reg_offs == PT_CTPSW || reg_offs == PT_CTBP)
-		/* Register saved during context switch.  */
-		regs = thread_saved_regs (t);
-	else
-		/* Register saved during kernel entry (or not available).  */
-		regs = task_pt_regs (t);
-
-	return (v850_reg_t *)((char *)regs + reg_offs);
-}
-
-/* Set the bits SET and clear the bits CLEAR in the v850e DIR
-   (`debug information register').  Returns the new value of DIR.  */
-static inline v850_reg_t set_dir (v850_reg_t set, v850_reg_t clear)
-{
-	register v850_reg_t rval asm ("r10");
-	register v850_reg_t arg0 asm ("r6") = set;
-	register v850_reg_t arg1 asm ("r7") = clear;
-
-	/* The dbtrap handler has exactly this functionality when called
-	   from kernel mode.  0xf840 is a `dbtrap' insn.  */
-	asm (".short 0xf840" : "=r" (rval) : "r" (arg0), "r" (arg1));
-
-	return rval;
-}
-
-/* Makes sure hardware single-stepping is (globally) enabled.
-   Returns true if successful.  */
-static inline int enable_single_stepping (void)
-{
-	static int enabled = 0;	/* Remember whether we already did it.  */
-	if (! enabled) {
-		/* Turn on the SE (`single-step enable') bit, 0x100, in the
-		   DIR (`debug information register').  This may fail if a
-		   processor doesn't support it or something.  We also try
-		   to clear bit 0x40 (`INI'), which is necessary to use the
-		   debug stuff on the v850e2; on the v850e, clearing 0x40
-		   shouldn't cause any problem.  */
-		v850_reg_t dir = set_dir (0x100, 0x40);
-		/* Make sure it really got set.  */
-		if (dir & 0x100)
-			enabled = 1;
-	}
-	return enabled;
-}
-
-/* Try to set CHILD's single-step flag to VAL.  Returns true if successful.  */
-static int set_single_step (struct task_struct *t, int val)
-{
-	v850_reg_t *psw_addr = reg_save_addr(PT_PSW, t);
-	if (val) {
-		/* Make sure single-stepping is enabled.  */
-		if (! enable_single_stepping ())
-			return 0;
-		/* Set T's single-step flag.  */
-		*psw_addr |= 0x800;
-	} else
-		*psw_addr &= ~0x800;
-	return 1;
-}
-
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
-	int rval;
-
-	switch (request) {
-		unsigned long val;
-
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		rval = generic_ptrace_peekdata(child, addr, data);
-		goto out;
-
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		rval = generic_ptrace_pokedata(child, addr, data);
-		goto out;
-
-	/* Read/write the word at location ADDR in the registers.  */
-	case PTRACE_PEEKUSR:
-	case PTRACE_POKEUSR:
-		rval = 0;
-		if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
-			/* Special requests that don't actually correspond
-			   to offsets in struct pt_regs.  */
-			if (addr == PT_TEXT_ADDR)
-				val = child->mm->start_code;
-			else if (addr == PT_DATA_ADDR)
-				val = child->mm->start_data;
-			else if (addr == PT_TEXT_LEN)
-				val = child->mm->end_code
-					- child->mm->start_code;
-			else
-				rval = -EIO;
-		} else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
-			v850_reg_t *reg_addr = reg_save_addr(addr, child);
-			if (request == PTRACE_PEEKUSR)
-				val = *reg_addr;
-			else
-				*reg_addr = data;
-		} else
-			rval = -EIO;
-
-		if (rval == 0 && request == PTRACE_PEEKUSR)
-			rval = put_user (val, (unsigned long *)data);
-		goto out;
-
-	/* Continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* Restart after a signal.  */
-	case PTRACE_CONT:
-	/* Execute a single instruction. */
-	case PTRACE_SINGLESTEP:
-		rval = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		/* Turn CHILD's single-step flag on or off.  */
-		if (! set_single_step (child, request == PTRACE_SINGLESTEP))
-			break;
-
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		child->exit_code = data;
-		wake_up_process(child);
-		rval = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		rval = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_DETACH: /* detach a process that was attached. */
-		set_single_step (child, 0);  /* Clear single-step flag */
-		rval = ptrace_detach(child, data);
-		break;
-
-	default:
-		rval = -EIO;
-		goto out;
-	}
- out:
-	return rval;
-}
-
-asmlinkage void syscall_trace(void)
-{
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
-void ptrace_disable (struct task_struct *child)
-{
-	/* nothing to do */
-}
diff --git a/arch/v850/kernel/rte_cb.c b/arch/v850/kernel/rte_cb.c
deleted file mode 100644
index 43018e1edeb..00000000000
--- a/arch/v850/kernel/rte_cb.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * include/asm-v850/rte_cb.c -- Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-static void led_tick (void);
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-#ifdef CONFIG_RTE_CB_MULTI
-extern void multi_init (void);
-#endif
-
-
-void __init rte_cb_early_init (void)
-{
-	v850e_intc_disable_irqs ();
-
-#ifdef CONFIG_RTE_CB_MULTI
-	multi_init ();
-#endif
-}
-
-void __init mach_setup (char **cmdline)
-{
-#ifdef CONFIG_RTE_MB_A_PCI
-	/* Probe for Mother-A, and print a message if we find it.  */
-	*(volatile unsigned long *)MB_A_SRAM_ADDR = 0xDEADBEEF;
-	if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0xDEADBEEF) {
-		*(volatile unsigned long *)MB_A_SRAM_ADDR = 0x12345678;
-		if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0x12345678)
-			printk (KERN_INFO
-				"          NEC SolutionGear/Midas lab"
-				" RTE-MOTHER-A motherboard\n");
-	}
-#endif /* CONFIG_RTE_MB_A_PCI */
-
-	mach_tick = led_tick;
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-/* This says `HALt.' in LEDese.  */
-static unsigned char halt_leds_msg[] = { 0x76, 0x77, 0x38, 0xF8 };
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-
-	/* Ignore all interrupts.  */
-	local_irq_disable ();
-
-	/* Write a little message.  */
-	write_leds (0, halt_leds_msg, sizeof halt_leds_msg);
-
-	/* Really halt.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-
-/* Animated LED display for timer tick.  */
-
-#define TICK_UPD_FREQ	6
-static int tick_frames[][10] = {
-	{ 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, -1 },
-	{ 0x63, 0x5c, -1 },
-	{ 0x5c, 0x00, -1 },
-	{ 0x63, 0x00, -1 },
-	{ -1 }
-};
-
-static void led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == (HZ / TICK_UPD_FREQ)) {
-		/* Which frame we're currently displaying for each digit.  */
-		static unsigned frame_nums[LED_NUM_DIGITS] = { 0 };
-		/* Display image.  */
-		static unsigned char image[LED_NUM_DIGITS] = { 0 };
-		unsigned char prev_image[LED_NUM_DIGITS];
-		int write_to_leds = 1; /* true if we should actually display */
-		int digit;
-
-		/* We check to see if the physical LEDs contains what we last
-		   wrote to them; if not, we suppress display (this is so that
-		   users can write to the LEDs, and not have their output
-		   overwritten).  As a special case, we start writing again if
-		   all the LEDs are blank, or our display image is all zeros
-		   (indicating that this is the initial update, when the actual
-		   LEDs might contain random data).  */
-		read_leds (0, prev_image, LED_NUM_DIGITS);
-		for (digit = 0; digit < LED_NUM_DIGITS; digit++)
-			if (image[digit] != prev_image[digit]
-			    && image[digit] && prev_image[digit])
-			{
-				write_to_leds = 0;
-				break;
-			}
-
-		/* Update display image.  */
-		for (digit = 0;
-		     digit < LED_NUM_DIGITS && tick_frames[digit][0] >= 0;
-		     digit++)
-		{
-			int frame = tick_frames[digit][frame_nums[digit]];
-			if (frame < 0) {
-				image[digit] = tick_frames[digit][0];
-				frame_nums[digit] = 1;
-			} else {
-				image[digit] = frame;
-				frame_nums[digit]++;
-				break;
-			}
-		}
-
-		if (write_to_leds)
-			/* Write the display image to the physical LEDs.  */
-			write_leds (0, image, LED_NUM_DIGITS);
-
-		counter = 0;
-	}
-}
-
-
-/* Mother-A interrupts.  */
-
-#ifdef CONFIG_RTE_GBUS_INT
-
-#define L GBUS_INT_PRIORITY_LOW
-#define M GBUS_INT_PRIORITY_MEDIUM
-#define H GBUS_INT_PRIORITY_HIGH
-
-static struct gbus_int_irq_init gbus_irq_inits[] = {
-#ifdef CONFIG_RTE_MB_A_PCI
-	{ "MB_A_LAN",	IRQ_MB_A_LAN,		1,		     1, L },
-	{ "MB_A_PCI1",	IRQ_MB_A_PCI1(0),	IRQ_MB_A_PCI1_NUM,   1, L },
-	{ "MB_A_PCI2",	IRQ_MB_A_PCI2(0),	IRQ_MB_A_PCI2_NUM,   1, L },
-	{ "MB_A_EXT",	IRQ_MB_A_EXT(0),	IRQ_MB_A_EXT_NUM,    1, L },
-	{ "MB_A_USB_OC",IRQ_MB_A_USB_OC(0),	IRQ_MB_A_USB_OC_NUM, 1, L },
-	{ "MB_A_PCMCIA_OC",IRQ_MB_A_PCMCIA_OC,	1,		     1, L },
-#endif
-	{ 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-#endif /* CONFIG_RTE_GBUS_INT */
-
-
-void __init rte_cb_init_irqs (void)
-{
-#ifdef CONFIG_RTE_GBUS_INT
-	gbus_int_init_irqs ();
-	gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-#endif /* CONFIG_RTE_GBUS_INT */
-}
diff --git a/arch/v850/kernel/rte_cb_leds.c b/arch/v850/kernel/rte_cb_leds.c
deleted file mode 100644
index aa47ab1dcd8..00000000000
--- a/arch/v850/kernel/rte_cb_leds.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-v850/rte_cb_leds.c -- Midas lab RTE-CB board LED device support
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-
-#include <asm/uaccess.h>
-
-#define LEDS_MINOR	169	/* Minor device number, using misc major.  */
-
-/* The actual LED hardware is write-only, so we hold the contents here too.  */
-static unsigned char leds_image[LED_NUM_DIGITS] = { 0 };
-
-/* Spinlock protecting the above leds.  */
-static DEFINE_SPINLOCK(leds_lock);
-
-/* Common body of LED read/write functions, checks POS and LEN for
-   correctness, declares a variable using IMG_DECL, initialized pointing at
-   the POS position in the LED image buffer, and and iterates COPY_EXPR
-   until BUF is equal to the last buffer position; finally, sets LEN to be
-   the amount actually copied.  IMG should be a variable declaration
-   (without an initializer or a terminating semicolon); POS, BUF, and LEN
-   should all be simple variables.  */
-#define DO_LED_COPY(img_decl, pos, buf, len, copy_expr)			\
-do {									\
-	if (pos > LED_NUM_DIGITS)					\
-		len = 0;						\
-	else {								\
-		if (pos + len > LED_NUM_DIGITS)				\
-			len = LED_NUM_DIGITS - pos;			\
-									\
-		if (len > 0) {						\
-			unsigned long _flags;				\
-			const char *_end = buf + len;			\
-			img_decl = &leds_image[pos];			\
-									\
-			spin_lock_irqsave (leds_lock, _flags);		\
-			do						\
-				(copy_expr);				\
-			while (buf != _end);				\
-			spin_unlock_irqrestore (leds_lock, _flags);	\
-		}							\
-	}								\
-} while (0)
-
-/* Read LEN bytes from LEDs at position POS, into BUF.
-   Returns actual amount read.  */
-unsigned read_leds (unsigned pos, char *buf, unsigned len)
-{
-	DO_LED_COPY (const char *img, pos, buf, len, *buf++ = *img++);
-	return len;
-}
-
-/* Write LEN bytes to LEDs at position POS, from BUF.
-   Returns actual amount written.  */
-unsigned write_leds (unsigned pos, const char *buf, unsigned len)
-{
-	/* We write the actual LED values backwards, because
-	   increasing memory addresses reflect LEDs right-to-left. */
-	volatile char *led = &LED (LED_NUM_DIGITS - pos - 1);
-	/* We invert the value written to the hardware, because 1 = off,
-	   and 0 = on.  */
-	DO_LED_COPY (char *img, pos, buf, len,
-		     *led-- = 0xFF ^ (*img++ = *buf++));
-	return len;
-}
-
-
-/* Device functions.  */
-
-static ssize_t leds_dev_read (struct file *file, char *buf, size_t len,
-			      loff_t *pos)
-{
-	char temp_buf[LED_NUM_DIGITS];
-	len = read_leds (*pos, temp_buf, len);
-	if (copy_to_user (buf, temp_buf, len))
-		return -EFAULT;
-	*pos += len;
-	return len;
-}
-
-static ssize_t leds_dev_write (struct file *file, const char *buf, size_t len,
-			       loff_t *pos)
-{
-	char temp_buf[LED_NUM_DIGITS];
-	if (copy_from_user (temp_buf, buf, min_t(size_t, len, LED_NUM_DIGITS)))
-		return -EFAULT;
-	len = write_leds (*pos, temp_buf, len);
-	*pos += len;
-	return len;
-}
-
-static loff_t leds_dev_lseek (struct file *file, loff_t offs, int whence)
-{
-	if (whence == 1)
-		offs += file->f_pos; /* relative */
-	else if (whence == 2)
-		offs += LED_NUM_DIGITS; /* end-relative */
-
-	if (offs < 0 || offs > LED_NUM_DIGITS)
-		return -EINVAL;
-
-	file->f_pos = offs;
-
-	return 0;
-}
-
-static const struct file_operations leds_fops = {
-	.read		= leds_dev_read,
-	.write		= leds_dev_write,
-	.llseek		= leds_dev_lseek
-};
-
-static struct miscdevice leds_miscdev = {
-	.name		= "leds",
-	.minor		= LEDS_MINOR,
-	.fops		= &leds_fops
-};
-
-int __init leds_dev_init (void)
-{
-	return misc_register (&leds_miscdev);
-}
-
-__initcall (leds_dev_init);
diff --git a/arch/v850/kernel/rte_cb_multi.c b/arch/v850/kernel/rte_cb_multi.c
deleted file mode 100644
index 963d55ab34c..00000000000
--- a/arch/v850/kernel/rte_cb_multi.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-v850/rte_multi.c -- Support for Multi debugger monitor ROM
- * 	on Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-
-#include <asm/machdep.h>
-
-#define IRQ_ADDR(irq) (0x80 + (irq) * 0x10)
-
-/* A table of which interrupt vectors to install, since blindly
-   installing all of them makes the debugger stop working.  This is a
-   list of offsets in the interrupt vector area; each entry means to
-   copy that particular 16-byte vector.  An entry less than zero ends
-   the table.  */
-static long multi_intv_install_table[] = {
-	/* Trap vectors */
-	0x40, 0x50,		
-
-#ifdef CONFIG_RTE_CB_MULTI_DBTRAP
-	/* Illegal insn / dbtrap.  These are used by multi, so only handle
-	   them if configured to do so.  */
-	0x60,
-#endif
-
-	/* GINT1 - GINT3 (note, not GINT0!) */
-	IRQ_ADDR (IRQ_GINT(1)),
-	IRQ_ADDR (IRQ_GINT(2)),
-	IRQ_ADDR (IRQ_GINT(3)),
-
-	/* Timer D interrupts (up to 4 timers) */
-	IRQ_ADDR (IRQ_INTCMD(0)),
-#if IRQ_INTCMD_NUM > 1
-	IRQ_ADDR (IRQ_INTCMD(1)),
-#if IRQ_INTCMD_NUM > 2
-	IRQ_ADDR (IRQ_INTCMD(2)),
-#if IRQ_INTCMD_NUM > 3
-	IRQ_ADDR (IRQ_INTCMD(3)),
-#endif
-#endif
-#endif
-	
-	/* UART interrupts (up to 3 channels) */
-	IRQ_ADDR (IRQ_INTSER (0)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (0)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (0)), /* tx */
-#if IRQ_INTSR_NUM > 1
-	IRQ_ADDR (IRQ_INTSER (1)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (1)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (1)), /* tx */
-#if IRQ_INTSR_NUM > 2
-	IRQ_ADDR (IRQ_INTSER (2)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (2)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (2)), /* tx */
-#endif
-#endif
-
-	-1
-};
-
-/* Early initialization for kernel using Multi debugger ROM monitor.  */
-void __init multi_init (void)
-{
-	/* We're using the Multi debugger monitor, so we have to install
-	   the interrupt vectors.  The monitor doesn't allow them to be
-	   initially downloaded into their final destination because
-	   it's in the monitor's scratch-RAM area.  Unfortunately, Multi
-	   also doesn't deal correctly with ELF sections where the LMA
-	   and VMA differ -- it just ignores the LMA -- so we can't use
-	   that feature to work around the problem.  What we do instead
-	   is just put the interrupt vectors into a normal section, and
-	   do the necessary copying and relocation here.  Since the
-	   interrupt vector basically only contains `jr' instructions
-	   and no-ops, it's not that hard.  */
-	extern unsigned long _intv_load_start, _intv_start;
-	register unsigned long *src = &_intv_load_start;
-	register unsigned long *dst = (unsigned long *)INTV_BASE;
-	register unsigned long jr_fixup = (char *)&_intv_start - (char *)dst;
-	register long *ii;
-
-	/* Copy interrupt vectors as instructed by multi_intv_install_table. */
-	for (ii = multi_intv_install_table; *ii >= 0; ii++) {
-		/* Copy 16-byte interrupt vector at offset *ii.  */
-		int boffs;
-		for (boffs = 0; boffs < 0x10; boffs += sizeof *src) {
-			/* Copy a single word, fixing up the jump offs
-			   if it's a `jr' instruction.  */
-			int woffs = (*ii + boffs) / sizeof *src;
-			unsigned long word = src[woffs];
-
-			if ((word & 0xFC0) == 0x780) {
-				/* A `jr' insn, fix up its offset (and yes, the
-				   weird half-word swapping is intentional). */
-				unsigned short hi = word & 0xFFFF;
-				unsigned short lo = word >> 16;
-				unsigned long udisp22
-					= lo + ((hi & 0x3F) << 16);
-				long disp22 = (long)(udisp22 << 10) >> 10;
-
-				disp22 += jr_fixup;
-
-				hi = ((disp22 >> 16) & 0x3F) | 0x780;
-				lo = disp22 & 0xFFFF;
-
-				word = hi + (lo << 16);
-			}
-
-			dst[woffs] = word;
-		}
-	}
-}
diff --git a/arch/v850/kernel/rte_ma1_cb-rom.ld b/arch/v850/kernel/rte_ma1_cb-rom.ld
deleted file mode 100644
index 87b618f8253..00000000000
--- a/arch/v850/kernel/rte_ma1_cb-rom.ld
+++ /dev/null
@@ -1,14 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in ROM.  */
-
-MEMORY {
-	ROM   : ORIGIN = 0x00000000, LENGTH = 0x00100000
-	/* 1MB of SRAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.c b/arch/v850/kernel/rte_ma1_cb.c
deleted file mode 100644
index 08abf3d5f8d..00000000000
--- a/arch/v850/kernel/rte_ma1_cb.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/v850/kernel/rte_ma1_cb.c -- Midas labs RTE-V850E/MA1-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/ma1.h>
-#include <asm/rte_ma1_cb.h>
-#include <asm/v850e_timer_c.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_early_init (void)
-{
-	rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-#ifdef CONFIG_RTE_CB_MULTI
-	/* Prevent the kernel from touching the monitor's scratch RAM.  */
-	reserve_bootmem(MON_SCRATCH_ADDR, MON_SCRATCH_SIZE,
-			BOOTMEM_DEFAULT);
-#endif
-
-	/* The space between SRAM and SDRAM is filled with duplicate
-	   images of SRAM.  Prevent the kernel from using them.  */
-	reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-			 SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-			 BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_ma1_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-MA1-CB connects some general-purpose I/O pins on the
-	   CPU to the RTS/CTS lines of UART 0's serial connection.
-	   I/O pins P42 and P43 are RTS and CTS respectively.  */
-	if (chan == 0) {
-		/* Put P42 & P43 in I/O port mode.  */
-		MA_PORT4_PMC &= ~0xC;
-		/* Make P42 an output, and P43 an input.  */
-		MA_PORT4_PM = (MA_PORT4_PM & ~0xC) | 0x8;
-	}
-
-	/* Do pre-configuration for the actual UART.  */
-	ma_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	unsigned tc;
-
-	/* Initialize interrupts.  */
-	ma_init_irqs ();
-	rte_cb_init_irqs ();
-
-	/* Use falling-edge-sensitivity for interrupts .  */
-	V850E_TIMER_C_SESC (0) &= ~0xC;
-	V850E_TIMER_C_SESC (1) &= ~0xF;
-
-	/* INTP000-INTP011 are shared with `Timer C', so we have to set
-	   up Timer C to pass them through as raw interrupts.  */
-	for (tc = 0; tc < 2; tc++)
-		/* Turn on the timer.  */
-		V850E_TIMER_C_TMCC0 (tc) |= V850E_TIMER_C_TMCC0_CAE;
-
-	/* Make sure the relevant port0/port1 pins are assigned
-	   interrupt duty.  We used INTP001-INTP011 (don't screw with
-	   INTP000 because the monitor uses it).  */
-	MA_PORT0_PMC |= 0x4;	/* P02 (INTP001) in IRQ mode.  */
-	MA_PORT1_PMC |= 0x6;	/* P11 (INTP010) & P12 (INTP011) in IRQ mode.*/
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.ld b/arch/v850/kernel/rte_ma1_cb.ld
deleted file mode 100644
index c8e16d16be4..00000000000
--- a/arch/v850/kernel/rte_ma1_cb.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in SDRAM, under Multi debugger.  */
-
-MEMORY {
-	/* 1MB of SRAM; we can't use the last 32KB, because it's used by
-	   the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-	/* Monitor scratch RAM; only the interrupt vectors should go here.  */
-	MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_MA1_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	/* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-	   kernel in a single ELF segment, and the Multi debugger (which
-	   we use to load the kernel) appears to have bizarre problems
-	   dealing with it.  */
-
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-
-		/* The address at which the interrupt vectors are initially
-		   loaded by the loader.  We can't load the interrupt vectors
-		   directly into their target location, because the monitor
-		   ROM for the GHS Multi debugger barfs if we try.
-		   Unfortunately, Multi also doesn't deal correctly with ELF
-		   sections where the LMA and VMA differ (it just ignores the
-		   LMA), so we can't use that feature to work around the
-		   problem!  What we do instead is just put the interrupt
-		   vectors into a normal section, and have the
-		   `mach_early_init' function for Midas boards do the
-		   necessary copying and relocation at runtime (this section
-		   basically only contains `jr' instructions, so it's not
-		   that hard).  */
-		. = ALIGN (0x10) ;
-		__intv_load_start = . ;
-		INTV_CONTENTS
-	} > KRAM
-
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c
deleted file mode 100644
index 687e367d8b6..00000000000
--- a/arch/v850/kernel/rte_mb_a_pci.c
+++ /dev/null
@@ -1,819 +0,0 @@
-/*
- * arch/v850/kernel/mb_a_pci.c -- PCI support for Midas lab RTE-MOTHER-A board
- *
- *  Copyright (C) 2001,02,03,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-
-/* __nomods_init is like __devinit, but is a no-op when modules are enabled.
-   This is used by some routines that can be called either during boot
-   or by a module.  */
-#ifdef CONFIG_MODULES
-#define __nomods_init /*nothing*/
-#else
-#define __nomods_init __devinit
-#endif
-
-/* PCI devices on the Mother-A board can only do DMA to/from the MB SRAM
-   (the RTE-V850E/MA1-CB cpu board doesn't support PCI access to
-   CPU-board memory), and since linux DMA buffers are allocated in
-   normal kernel memory, we basically have to copy DMA blocks around
-   (this is like a `bounce buffer').  When a DMA block is `mapped', we
-   allocate an identically sized block in MB SRAM, and if we're doing
-   output to the device, copy the CPU-memory block to the MB-SRAM block.
-   When an active block is `unmapped', we will copy the block back to
-   CPU memory if necessary, and then deallocate the MB SRAM block.
-   Ack.  */
-
-/* Where the motherboard SRAM is in the PCI-bus address space (the
-   first 512K of it is also mapped at PCI address 0).  */
-#define PCI_MB_SRAM_ADDR 0x800000
-
-/* Convert CPU-view MB SRAM address to/from PCI-view addresses of the
-   same memory.  */
-#define MB_SRAM_TO_PCI(mb_sram_addr) \
-   ((dma_addr_t)mb_sram_addr - MB_A_SRAM_ADDR + PCI_MB_SRAM_ADDR)
-#define PCI_TO_MB_SRAM(pci_addr)     \
-   (void *)(pci_addr - PCI_MB_SRAM_ADDR + MB_A_SRAM_ADDR)
-
-static void pcibios_assign_resources (void);
-
-struct mb_pci_dev_irq {
-	unsigned dev;		/* PCI device number */
-	unsigned irq_base;	/* First IRQ  */
-	unsigned query_pin;	/* True if we should read the device's
-				   Interrupt Pin info, and allocate
-				   interrupt IRQ_BASE + PIN.  */
-};
-
-/* PCI interrupts are mapped statically to GBUS interrupts.  */
-static struct mb_pci_dev_irq mb_pci_dev_irqs[] = {
-	/* Motherboard SB82558 ethernet controller */
-	{ 10,	IRQ_MB_A_LAN,		0 },
-	/* PCI slot 1 */
-	{ 8, 	IRQ_MB_A_PCI1(0),	1 },
-	/* PCI slot 2 */
-	{ 9, 	IRQ_MB_A_PCI2(0),	1 }
-};
-#define NUM_MB_PCI_DEV_IRQS ARRAY_SIZE(mb_pci_dev_irqs)
-
-
-/* PCI configuration primitives.  */
-
-#define CONFIG_DMCFGA(bus, devfn, offs)					\
-   (0x80000000								\
-    | ((offs) & ~0x3)							\
-    | ((devfn) << 8)							\
-    | ((bus)->number << 16))
-
-static int
-mb_pci_read (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 *rval)
-{
-	u32 addr;
-	int flags;
-
-	local_irq_save (flags);
-
-	MB_A_PCI_PCICR = 0x7;
-	MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-	addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-	switch (size) {
-	case 1:	*rval = *(volatile  u8 *)addr; break;
-	case 2:	*rval = *(volatile u16 *)addr; break;
-	case 4:	*rval = *(volatile u32 *)addr; break;
-	}
-
-        if (MB_A_PCI_PCISR & 0x2000) {
-		MB_A_PCI_PCISR = 0x2000;
-		*rval = ~0;
-        }
-
-	MB_A_PCI_DMCFGA = 0;
-
-	local_irq_restore (flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mb_pci_write (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 val)
-{
-	u32 addr;
-	int flags;
-
-	local_irq_save (flags);
-
-	MB_A_PCI_PCICR = 0x7;
-	MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-	addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-	switch (size) {
-	case 1: *(volatile  u8 *)addr = val; break;
-	case 2: *(volatile u16 *)addr = val; break;
-	case 4: *(volatile u32 *)addr = val; break;
-	}
-
-        if (MB_A_PCI_PCISR & 0x2000)
-		MB_A_PCI_PCISR = 0x2000;
-
-	MB_A_PCI_DMCFGA = 0;
-
-	local_irq_restore (flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops mb_pci_config_ops = {
-	.read	= mb_pci_read,
-	.write	= mb_pci_write,
-};
-
-
-/* PCI Initialization.  */
-
-static struct pci_bus *mb_pci_bus = 0;
-
-/* Do initial PCI setup.  */
-static int __devinit pcibios_init (void)
-{
-	u32 id = MB_A_PCI_PCIHIDR;
-	u16 vendor = id & 0xFFFF;
-	u16 device = (id >> 16) & 0xFFFF;
-
-	if (vendor == PCI_VENDOR_ID_PLX && device == PCI_DEVICE_ID_PLX_9080) {
-		printk (KERN_INFO
-			"PCI: PLX Technology PCI9080 HOST/PCI bridge\n");
-
-		MB_A_PCI_PCICR = 0x147;
-
-		MB_A_PCI_PCIBAR0 = 0x007FFF00;
-		MB_A_PCI_PCIBAR1 = 0x0000FF00;
-		MB_A_PCI_PCIBAR2 = 0x00800000;
-
-		MB_A_PCI_PCILTR = 0x20;
-
-		MB_A_PCI_PCIPBAM |= 0x3;
-
-		MB_A_PCI_PCISR =  ~0; /* Clear errors.  */
-
-		/* Reprogram the motherboard's IO/config address space,
-		   as we don't support the GCS7 address space that the
-		   default uses.  */
-
-		/* Significant address bits used for decoding PCI GCS5 space
-		   accesses.  */
-		MB_A_PCI_DMRR = ~(MB_A_PCI_MEM_SIZE - 1);
-
-		/* I don't understand this, but the SolutionGear example code
-		   uses such an offset, and it doesn't work without it.  XXX */
-#if GCS5_SIZE == 0x00800000
-#define GCS5_CFG_OFFS 0x00800000
-#else
-#define GCS5_CFG_OFFS 0
-#endif
-
-		/* Address bit values for matching.  Note that we have to give
-		   the address from the motherboard's point of view, which is
-		   different than the CPU's.  */
-		/* PCI memory space.  */
-		MB_A_PCI_DMLBAM = GCS5_CFG_OFFS + 0x0;
-		/* PCI I/O space.  */
-		MB_A_PCI_DMLBAI =
-			GCS5_CFG_OFFS + (MB_A_PCI_IO_ADDR - GCS5_ADDR);
-
-		mb_pci_bus = pci_scan_bus (0, &mb_pci_config_ops, 0);
-
-		pcibios_assign_resources ();
-	} else
-		printk (KERN_ERR "PCI: HOST/PCI bridge not found\n");
-
-	return 0;
-}
-
-subsys_initcall (pcibios_init);
-
-char __devinit *pcibios_setup (char *option)
-{
-	/* Don't handle any options. */
-	return option;
-}
-
-
-int __nomods_init pcibios_enable_device (struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because "
-			       "of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
-
-/* Resource allocation.  */
-static void __devinit pcibios_assign_resources (void)
-{
-	struct pci_dev *dev = NULL;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		unsigned di_num;
-		unsigned class = dev->class >> 8;
-
-		if (class && class != PCI_CLASS_BRIDGE_HOST) {
-			unsigned r_num;
-			for(r_num = 0; r_num < 6; r_num++) {
-				r = &dev->resource[r_num];
-				if (!r->start && r->end)
-					pci_assign_resource (dev, r_num);
-			}
-		}
-
-		/* Assign interrupts.  */
-		for (di_num = 0; di_num < NUM_MB_PCI_DEV_IRQS; di_num++) {
-			struct mb_pci_dev_irq *di = &mb_pci_dev_irqs[di_num];
-
-			if (di->dev == PCI_SLOT (dev->devfn)) {
-				unsigned irq = di->irq_base;
-
-				if (di->query_pin) {
-					/* Find out which interrupt pin
-					   this device uses (each PCI
-					   slot has 4).  */
-					u8 irq_pin;
-
-					pci_read_config_byte (dev,
-							     PCI_INTERRUPT_PIN,
-							      &irq_pin);
-
-					if (irq_pin == 0)
-						/* Doesn't use interrupts.  */ 
-						continue;
-					else
-						irq += irq_pin - 1;
-				}
-
-				pcibios_update_irq (dev, irq);
-			}
-		}
-	}
-}
-
-void __devinit pcibios_update_irq (struct pci_dev *dev, int irq)
-{
-	dev->irq = irq;
-	pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
-}
-
-void __devinit
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			struct resource *res)
-{
-	unsigned long offset = 0;
-
-	if (res->flags & IORESOURCE_IO) {
-		offset = MB_A_PCI_IO_ADDR;
-	} else if (res->flags & IORESOURCE_MEM) {
-		offset = MB_A_PCI_MEM_ADDR;
-	}
-
-	region->start = res->start - offset;
-	region->end = res->end - offset;
-}
-
-
-/* Stubs for things we don't use.  */
-
-/* Called after each bus is probed, but before its children are examined. */
-void pcibios_fixup_bus(struct pci_bus *b)
-{
-}
-
-void
-pcibios_align_resource (void *data, struct resource *res,
-			resource_size_t size, resource_size_t align)
-{
-}
-
-void pcibios_set_master (struct pci_dev *dev)
-{
-}
-
-
-/* Mother-A SRAM memory allocation.  This is a simple first-fit allocator.  */
-
-/* A memory free-list node.  */
-struct mb_sram_free_area {
-	void *mem;
-	unsigned long size;
-	struct mb_sram_free_area *next;
-};
-
-/* The tail of the free-list, which starts out containing all the SRAM.  */
-static struct mb_sram_free_area mb_sram_free_tail = {
-	(void *)MB_A_SRAM_ADDR, MB_A_SRAM_SIZE, 0
-};
-
-/* The free-list.  */
-static struct mb_sram_free_area *mb_sram_free_areas = &mb_sram_free_tail;
-
-/* The free-list of free free-list nodes. (:-)  */
-static struct mb_sram_free_area *mb_sram_free_free_areas = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(mb_sram_lock);
-
-/* Allocate a memory block at least SIZE bytes long in the Mother-A SRAM
-   space.  */
-static void *alloc_mb_sram (size_t size)
-{
-	struct mb_sram_free_area *prev, *fa;
-	unsigned long flags;
-	void *mem = 0;
-
-	spin_lock_irqsave (mb_sram_lock, flags);
-
-	/* Look for a free area that can contain SIZE bytes.  */
-	for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-		if (fa->size >= size) {
-			/* Found one!  */
-			mem = fa->mem;
-
-			if (fa->size == size) {
-				/* In fact, it fits exactly, so remove
-				   this node from the free-list.  */
-				if (prev)
-					prev->next = fa->next;
-				else
-					mb_sram_free_areas = fa->next;
-				/* Put it on the free-list-entry-free-list. */
-				fa->next = mb_sram_free_free_areas;
-				mb_sram_free_free_areas = fa;
-			} else {
-				/* FA is bigger than SIZE, so just
-				   reduce its size to account for this
-				   allocation.  */
-				fa->mem += size;
-				fa->size -= size;
-			}
-
-			break;
-		}
-
-	spin_unlock_irqrestore (mb_sram_lock, flags);
-
-	return mem;
-}
-
-/* Return the memory area MEM of size SIZE to the MB SRAM free pool.  */
-static void free_mb_sram (void *mem, size_t size)
-{
-	struct mb_sram_free_area *prev, *fa, *new_fa;
-	unsigned long flags;
-	void *end = mem + size;
-
-	spin_lock_irqsave (mb_sram_lock, flags);
-
- retry:
-	/* Find an adjacent free-list entry.  */
-	for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-		if (fa->mem == end) {
-			/* FA is just after MEM, grow down to encompass it. */
-			fa->mem = mem;
-			fa->size += size;
-			goto done;
-		} else if (fa->mem + fa->size == mem) {
-			struct mb_sram_free_area *next_fa = fa->next;
-
-			/* FA is just before MEM, expand to encompass it. */
-			fa->size += size;
-
-			/* See if FA can now be merged with its successor. */
-			if (next_fa && fa->mem + fa->size == next_fa->mem) {
-				/* Yup; merge NEXT_FA's info into FA.  */
-				fa->size += next_fa->size;
-				fa->next = next_fa->next;
-				/* Free NEXT_FA.  */
-				next_fa->next = mb_sram_free_free_areas;
-				mb_sram_free_free_areas = next_fa;
-			}
-			goto done;
-		} else if (fa->mem > mem)
-			/* We've reached the right spot in the free-list
-			   without finding an adjacent free-area, so add
-			   a new free area to hold mem. */
-			break;
-
-	/* Make a new free-list entry.  */
-
-	/* First, get a free-list entry.  */
-	if (! mb_sram_free_free_areas) {
-		/* There are none, so make some.  */
-		void *block;
-		size_t block_size = sizeof (struct mb_sram_free_area) * 8;
-
-		/* Don't hold the lock while calling kmalloc (I'm not
-		   sure whether it would be a problem, since we use
-		   GFP_ATOMIC, but it makes me nervous).  */
-		spin_unlock_irqrestore (mb_sram_lock, flags);
-
-		block = kmalloc (block_size, GFP_ATOMIC);
-		if (! block)
-			panic ("free_mb_sram: can't allocate free-list entry");
-
-		/* Now get the lock back.  */
-		spin_lock_irqsave (mb_sram_lock, flags);
-
-		/* Add the new free free-list entries.  */
-		while (block_size > 0) {
-			struct mb_sram_free_area *nfa = block;
-			nfa->next = mb_sram_free_free_areas;
-			mb_sram_free_free_areas = nfa;
-			block += sizeof *nfa;
-			block_size -= sizeof *nfa;
-		}
-
-		/* Since we dropped the lock to call kmalloc, the
-		   free-list could have changed, so retry from the
-		   beginning.  */
-		goto retry;
-	}
-
-	/* Remove NEW_FA from the free-list of free-list entries.  */
-	new_fa = mb_sram_free_free_areas;
-	mb_sram_free_free_areas = new_fa->next;
-
-	/* NEW_FA initially holds only MEM.  */
-	new_fa->mem = mem;
-	new_fa->size = size;
-
-	/* Insert NEW_FA in the free-list between PREV and FA. */
-	new_fa->next = fa;
-	if (prev)
-		prev->next = new_fa;
-	else
-		mb_sram_free_areas = new_fa;
-
- done:
-	spin_unlock_irqrestore (mb_sram_lock, flags);
-}
-
-
-/* Maintainence of CPU -> Mother-A DMA mappings.  */
-
-struct dma_mapping {
-	void *cpu_addr;
-	void *mb_sram_addr;
-	size_t size;
-	struct dma_mapping *next;
-};
-
-/* A list of mappings from CPU addresses to MB SRAM addresses for active
-   DMA blocks (that have been `granted' to the PCI device).  */
-static struct dma_mapping *active_dma_mappings = 0;
-
-/* A list of free mapping objects.  */
-static struct dma_mapping *free_dma_mappings = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(dma_mappings_lock);
-
-static struct dma_mapping *new_dma_mapping (size_t size)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping;
-	void *mb_sram_block = alloc_mb_sram (size);
-
-	if (! mb_sram_block)
-		return 0;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	if (! free_dma_mappings) {
-		/* We're out of mapping structures, make more.  */
-		void *mblock;
-		size_t mblock_size = sizeof (struct dma_mapping) * 8;
-
-		/* Don't hold the lock while calling kmalloc (I'm not
-		   sure whether it would be a problem, since we use
-		   GFP_ATOMIC, but it makes me nervous).  */
-		spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-		mblock = kmalloc (mblock_size, GFP_ATOMIC);
-		if (! mblock) {
-			free_mb_sram (mb_sram_block, size);
-			return 0;
-		}
-
-		/* Get the lock back.  */
-		spin_lock_irqsave (dma_mappings_lock, flags);
-
-		/* Add the new mapping structures to the free-list.  */
-		while (mblock_size > 0) {
-			struct dma_mapping *fm = mblock;
-			fm->next = free_dma_mappings;
-			free_dma_mappings = fm;
-			mblock += sizeof *fm;
-			mblock_size -= sizeof *fm;
-		}
-	}
-
-	/* Get a mapping struct from the freelist.  */
-	mapping = free_dma_mappings;
-	free_dma_mappings = mapping->next;
-
-	/* Initialize the mapping.  Other fields should be filled in by
-	   caller.  */
-	mapping->mb_sram_addr = mb_sram_block;
-	mapping->size = size;
-
-	/* Add it to the list of active mappings.  */
-	mapping->next = active_dma_mappings;
-	active_dma_mappings = mapping;
-
-	spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-	return mapping;
-}
-
-static struct dma_mapping *find_dma_mapping (void *mb_sram_addr)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	for (mapping = active_dma_mappings; mapping; mapping = mapping->next)
-		if (mapping->mb_sram_addr == mb_sram_addr) {
-			spin_unlock_irqrestore (dma_mappings_lock, flags);
-			return mapping;
-		}
-
-	panic ("find_dma_mapping: unmapped PCI DMA addr 0x%x",
-	       MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-static struct dma_mapping *deactivate_dma_mapping (void *mb_sram_addr)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping, *prev;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	for (prev = 0, mapping = active_dma_mappings;
-	     mapping;
-	     prev = mapping, mapping = mapping->next)
-	{
-		if (mapping->mb_sram_addr == mb_sram_addr) {
-			/* This is the MAPPING; deactivate it.  */
-			if (prev)
-				prev->next = mapping->next;
-			else
-				active_dma_mappings = mapping->next;
-
-			spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-			return mapping;
-		}
-	}
-
-	panic ("deactivate_dma_mapping: unmapped PCI DMA addr 0x%x",
-	       MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-/* Return MAPPING to the freelist.  */
-static inline void
-free_dma_mapping (struct dma_mapping *mapping)
-{
-	unsigned long flags;
-
-	free_mb_sram (mapping->mb_sram_addr, mapping->size);
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	mapping->next = free_dma_mappings;
-	free_dma_mappings = mapping;
-
-	spin_unlock_irqrestore (dma_mappings_lock, flags);
-}
-
-
-/* Single PCI DMA mappings.  */
-
-/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA.  The
-   32-bit PCI bus mastering address to use is returned.  the device owns
-   this memory until either pci_unmap_single or pci_dma_sync_single is
-   performed.  */
-dma_addr_t
-pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir)
-{
-	struct dma_mapping *mapping = new_dma_mapping (size);
-
-	if (! mapping)
-		return 0;
-
-	mapping->cpu_addr = cpu_addr;
-
-	if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_TODEVICE)
-		memcpy (mapping->mb_sram_addr, cpu_addr, size);
-
-	return MB_SRAM_TO_PCI (mapping->mb_sram_addr);
-}
-
-/* Return to the CPU the PCI DMA memory block previously `granted' to
-   PDEV, at DMA_ADDR.  */
-void pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		       int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = deactivate_dma_mapping (mb_sram_addr);
-
-	if (size != mapping->size)
-		panic ("pci_unmap_single: size (%d) doesn't match"
-		       " size of mapping at PCI DMA addr 0x%x (%d)\n",
-		       size, dma_addr, mapping->size);
-
-	/* Copy back the DMA'd contents if necessary.  */
-	if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_FROMDEVICE)
-		memcpy (mapping->cpu_addr, mb_sram_addr, size);
-
-	/* Return mapping to the freelist.  */
-	free_dma_mapping (mapping);
-}
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-void
-pci_dma_sync_single_for_cpu (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		     int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-	/* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-	if (dir == PCI_DMA_FROMDEVICE)
-		memcpy (mapping->cpu_addr, mb_sram_addr, size);
-	else if (dir == PCI_DMA_TODEVICE)
-		; /* nothing to do */
-	else
-		panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-void
-pci_dma_sync_single_for_device (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-				int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-	/* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-	if (dir == PCI_DMA_FROMDEVICE)
-		; /* nothing to do */
-	else if (dir == PCI_DMA_TODEVICE)
-		memcpy (mb_sram_addr, mapping->cpu_addr, size);
-	else
-		panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-
-/* Scatter-gather PCI DMA mappings.  */
-
-/* Do multiple DMA mappings at once.  */
-int
-pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir)
-{
-	BUG ();
-	return 0;
-}
-
-/* Unmap multiple DMA mappings at once.  */
-void
-pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,int dir)
-{
-	BUG ();
-}
-
-/* Make physical memory consistent for a set of streaming mode DMA
-   translations after a transfer.  The same as pci_dma_sync_single_* but
-   for a scatter-gather list, same rules and usage.  */
-
-void
-pci_dma_sync_sg_for_cpu (struct pci_dev *dev,
-			 struct scatterlist *sg, int sg_len,
-			 int dir)
-{
-	BUG ();
-}
-
-void
-pci_dma_sync_sg_for_device (struct pci_dev *dev,
-			    struct scatterlist *sg, int sg_len,
-			    int dir)
-{
-	BUG ();
-}
-
-
-/* PCI mem mapping.  */
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDR to the pci side dma address as well,
-   else DMA_ADDR is undefined.  */
-void *
-pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr)
-{
-	void *mb_sram_mem = alloc_mb_sram (size);
-	if (mb_sram_mem)
-		*dma_addr = MB_SRAM_TO_PCI (mb_sram_mem);
-	return mb_sram_mem;
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must be
-   the same as what as passed into pci_alloc_consistent.  References to
-   the memory and mappings associated with CPU_ADDR or DMA_ADDR past
-   this call are illegal.  */
-void
-pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
-		     dma_addr_t dma_addr)
-{
-	void *mb_sram_mem = PCI_TO_MB_SRAM (dma_addr);
-	free_mb_sram (mb_sram_mem, size);
-}
-
-
-/* iomap/iomap */
-
-void __iomem *pci_iomap (struct pci_dev *dev, int bar, unsigned long max)
-{
-	resource_size_t start = pci_resource_start (dev, bar);
-	resource_size_t len = pci_resource_len (dev, bar);
-
-	if (!start || len == 0)
-		return 0;
-
-	/* None of the ioremap functions actually do anything, other than
-	   re-casting their argument, so don't bother differentiating them.  */
-	return ioremap (start, len);
-}
-
-void pci_iounmap (struct pci_dev *dev, void __iomem *addr)
-{
-	/* nothing */
-}
-
-
-/* symbol exports (for modules) */
-
-EXPORT_SYMBOL (pci_map_single);
-EXPORT_SYMBOL (pci_unmap_single);
-EXPORT_SYMBOL (pci_alloc_consistent);
-EXPORT_SYMBOL (pci_free_consistent);
-EXPORT_SYMBOL (pci_dma_sync_single_for_cpu);
-EXPORT_SYMBOL (pci_dma_sync_single_for_device);
-EXPORT_SYMBOL (pci_iomap);
-EXPORT_SYMBOL (pci_iounmap);
diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c
deleted file mode 100644
index 46803d48dff..00000000000
--- a/arch/v850/kernel/rte_me2_cb.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * arch/v850/kernel/rte_me2_cb.c -- Midas labs RTE-V850E/ME2-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/me2.h>
-#include <asm/rte_me2_cb.h>
-#include <asm/machdep.h>
-#include <asm/v850e_intc.h>
-#include <asm/v850e_cache.h>
-#include <asm/irq.h>
-
-#include "mach.h"
-
-extern unsigned long *_intv_start;
-extern unsigned long *_intv_end;
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-
-/* SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START 	SDRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_me2_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-V850E/ME2-CB connects some general-purpose I/O
-	   pins on the CPU to the RTS/CTS lines of UARTB channel 0's
-	   serial connection.
-	   I/O pins P21 and P22 are RTS and CTS respectively.  */
-	if (chan == 0) {
-		/* Put P21 & P22 in I/O port mode.  */
-		ME2_PORT2_PMC &= ~0x6;
-		/* Make P21 and output, and P22 an input.  */
-		ME2_PORT2_PM = (ME2_PORT2_PM & ~0xC) | 0x4;
-	}
-
-	me2_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	/* Initialize interrupts.  */
-	me2_init_irqs ();
-	rte_me2_cb_init_irqs ();
-}
-
-#ifdef CONFIG_ROM_KERNEL
-/* Initialization for kernel in ROM.  */
-static inline rom_kernel_init (void)
-{
-	/* If the kernel is in ROM, we have to copy any initialized data
-	   from ROM into RAM.  */
-	extern unsigned long _data_load_start, _sdata, _edata;
-	register unsigned long *src = &_data_load_start;
-	register unsigned long *dst = &_sdata, *end = &_edata;
-
-	while (dst != end)
-		*dst++ = *src++;
-}
-#endif /* CONFIG_ROM_KERNEL */
-
-static void install_interrupt_vectors (void)
-{
-	unsigned long *p1, *p2;
-
-	ME2_IRAMM = 0x03; /* V850E/ME2 iRAM write mode */
-
-	/* vector copy to iRAM */
-	p1 = (unsigned long *)0; /* v85x vector start */
-	p2 = (unsigned long *)&_intv_start;
-	while (p2 < (unsigned long *)&_intv_end)
-		*p1++ = *p2++;
-
-	ME2_IRAMM = 0x00; /* V850E/ME2 iRAM read mode */
-}
-
-/* CompactFlash */
-
-static void cf_power_on (void)
-{
-	/* CF card detected? */
-	if (CB_CF_STS0 & 0x0030)
-		return;
-
-	CB_CF_REG0 = 0x0002; /* reest on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0003; /* power on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0001; /* reset off */
-	mdelay (10);
-}
-
-static void cf_power_off (void)
-{
-	CB_CF_REG0 = 0x0003; /* power on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0002; /* reest on */
-	mdelay (10);
-}
-
-void __init mach_early_init (void)
-{
-	install_interrupt_vectors ();
-
-	/* CS1 SDRAM instruction cache enable */
-	v850e_cache_enable (0x04, 0x03, 0);
-
-	rte_cb_early_init ();
-
-	/* CompactFlash power on */
-	cf_power_on ();
-
-#if defined (CONFIG_ROM_KERNEL)
-	rom_kernel_init ();
-#endif
-}
-
-
-/* RTE-V850E/ME2-CB Programmable Interrupt Controller.  */
-
-static struct cb_pic_irq_init cb_pic_irq_inits[] = {
-	{ "CB_EXTTM0",       IRQ_CB_EXTTM0,       1, 1, 6 },
-	{ "CB_EXTSIO",       IRQ_CB_EXTSIO,       1, 1, 6 },
-	{ "CB_TOVER",        IRQ_CB_TOVER,        1, 1, 6 },
-	{ "CB_GINT0",        IRQ_CB_GINT0,        1, 1, 6 },
-	{ "CB_USB",          IRQ_CB_USB,          1, 1, 6 },
-	{ "CB_LANC",         IRQ_CB_LANC,         1, 1, 6 },
-	{ "CB_USB_VBUS_ON",  IRQ_CB_USB_VBUS_ON,  1, 1, 6 },
-	{ "CB_USB_VBUS_OFF", IRQ_CB_USB_VBUS_OFF, 1, 1, 6 },
-	{ "CB_EXTTM1",       IRQ_CB_EXTTM1,       1, 1, 6 },
-	{ "CB_EXTTM2",       IRQ_CB_EXTTM2,       1, 1, 6 },
-	{ 0 }
-};
-#define NUM_CB_PIC_IRQ_INITS (ARRAY_SIZE(cb_pic_irq_inits) - 1)
-
-static struct hw_interrupt_type cb_pic_hw_itypes[NUM_CB_PIC_IRQ_INITS];
-static unsigned char cb_pic_active_irqs = 0;
-
-void __init rte_me2_cb_init_irqs (void)
-{
-	cb_pic_init_irq_types (cb_pic_irq_inits, cb_pic_hw_itypes);
-
-	/* Initalize on board PIC1 (not PIC0) enable */
-	CB_PIC_INT0M  = 0x0000;
-	CB_PIC_INT1M  = 0x0000;
-	CB_PIC_INTR   = 0x0000;
-	CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-	ME2_PORT2_PMC 	 |= 0x08;	/* INTP23/SCK1 mode */
-	ME2_PORT2_PFC 	 &= ~0x08;	/* INTP23 mode */
-	ME2_INTR(2) 	 &= ~0x08;	/* INTP23 falling-edge detect */
-	ME2_INTF(2) 	 &= ~0x08;	/*   " */
-
-	rte_cb_init_irqs ();	/* gbus &c */
-}
-
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void cb_pic_enable_irq (unsigned irq)
-{
-	CB_PIC_INT1M |= 1 << (irq - CB_PIC_BASE_IRQ);
-}
-
-void cb_pic_disable_irq (unsigned irq)
-{
-	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-void cb_pic_shutdown_irq (unsigned irq)
-{
-	cb_pic_disable_irq (irq);
-
-	if (--cb_pic_active_irqs == 0)
-		free_irq (IRQ_CB_PIC, 0);
-
-	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-static irqreturn_t cb_pic_handle_irq (int irq, void *dev_id,
-				      struct pt_regs *regs)
-{
-	irqreturn_t rval = IRQ_NONE;
-	unsigned status = CB_PIC_INTR;
-	unsigned enable = CB_PIC_INT1M;
-
-	/* Only pay attention to enabled interrupts.  */
-	status &= enable;
-
-	CB_PIC_INTEN &= ~CB_PIC_INT1EN;
-
-	if (status) {
-		unsigned mask = 1;
-
-		irq = CB_PIC_BASE_IRQ;
-		do {
-			/* There's an active interrupt, find out which one,
-			   and call its handler.  */
-			while (! (status & mask)) {
-				irq++;
-				mask <<= 1;
-			}
-			status &= ~mask;
-
-			CB_PIC_INTR = mask;
-
-			/* Recursively call handle_irq to handle it. */
-			handle_irq (irq, regs);
-			rval = IRQ_HANDLED;
-		} while (status);
-	}
-
-	CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-	return rval;
-}
-
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned cb_pic_startup_irq (unsigned irq)
-{
-	int rval;
-
-	if (cb_pic_active_irqs == 0) {
-		rval = request_irq (IRQ_CB_PIC, cb_pic_handle_irq,
-				    IRQF_DISABLED, "cb_pic_handler", 0);
-		if (rval != 0)
-			return rval;
-	}
-
-	cb_pic_active_irqs++;
-
-	cb_pic_enable_irq (irq);
-
-	return 0;
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
-				   struct hw_interrupt_type *hw_irq_types)
-{
-	struct cb_pic_irq_init *init;
-	for (init = inits; init->name; init++) {
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = cb_pic_startup_irq;
-		hwit->shutdown = cb_pic_shutdown_irq;
-		hwit->enable   = cb_pic_enable_irq;
-		hwit->disable  = cb_pic_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = irq_nop;
-
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-	}
-}
diff --git a/arch/v850/kernel/rte_me2_cb.ld b/arch/v850/kernel/rte_me2_cb.ld
deleted file mode 100644
index cf0766065ec..00000000000
--- a/arch/v850/kernel/rte_me2_cb.ld
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/ME2-CB evaluation board
-   (CONFIG_RTE_CB_ME2), with kernel in SDRAM.  */
-
-MEMORY {
-	/* 128Kbyte of IRAM */
-	IRAM : ORIGIN = 0x00000000, LENGTH = 0x00020000
-
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#define KRAM SDRAM
-
-SECTIONS {
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-		INTV_CONTENTS	/* copy to iRAM (0x0-0x620) */
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-	} > KRAM
-	
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb-multi.ld b/arch/v850/kernel/rte_nb85e_cb-multi.ld
deleted file mode 100644
index de347b4fffa..00000000000
--- a/arch/v850/kernel/rte_nb85e_cb-multi.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E), with the Multi debugger ROM monitor .  */
-
-MEMORY {
-	/* 1MB of SRAM; we can't use the last 96KB, because it's used by
-	   the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-	/* Monitor scratch RAM; only the interrupt vectors should go here.  */
-	MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-	/* 16MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	/* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-	   kernel in a single ELF segment, and the Multi debugger (which
-	   we use to load the kernel) appears to have bizarre problems
-	   dealing with it.  */
-
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-
-		/* The address at which the interrupt vectors are initially
-		   loaded by the loader.  We can't load the interrupt vectors
-		   directly into their target location, because the monitor
-		   ROM for the GHS Multi debugger barfs if we try.
-		   Unfortunately, Multi also doesn't deal correctly with ELF
-		   sections where the LMA and VMA differ (it just ignores the
-		   LMA), so we can't use that feature to work around the
-		   problem!  What we do instead is just put the interrupt
-		   vectors into a normal section, and have the
-		   `mach_early_init' function for Midas boards do the
-		   necessary copying and relocation at runtime (this section
-		   basically only contains `jr' instructions, so it's not
-		   that hard).  */
-		. = ALIGN (0x10) ;
-		__intv_load_start = . ;
-		INTV_CONTENTS
-	} > KRAM
-
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.c b/arch/v850/kernel/rte_nb85e_cb.c
deleted file mode 100644
index b4a045da5d7..00000000000
--- a/arch/v850/kernel/rte_nb85e_cb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/v850/kernel/rte_nb85e_cb.c -- Midas labs RTE-V850E/NB85E-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e.h>
-#include <asm/rte_nb85e_cb.h>
-
-#include "mach.h"
-
-void __init mach_early_init (void)
-{
-	/* Configure caching; some possible settings:
-
-	     BHC = 0x0000, DCC = 0x0000	 -- all caching disabled
-	     BHC = 0x0040, DCC = 0x0000	 -- SDRAM: icache only
-	     BHC = 0x0080, DCC = 0x0C00	 -- SDRAM: write-back dcache only
-	     BHC = 0x00C0, DCC = 0x0C00	 -- SDRAM: icache + write-back dcache
-	     BHC = 0x00C0, DCC = 0x0800	 -- SDRAM: icache + write-thru dcache
-
-	   We can only cache SDRAM (we can't use cache SRAM because it's in
-	   the same memory region as the on-chip RAM and I/O space).
-
-	   Unfortunately, the dcache seems to be buggy, so we only use the
-	   icache for now.  */
-	v850e_cache_enable (0x0040 /*BHC*/, 0x0003 /*ICC*/, 0x0000 /*DCC*/);
-
-	rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	/* We just use SDRAM here.  */
-	*ram_start = SDRAM_ADDR;
-	*ram_len = SDRAM_SIZE;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_nb85e_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-NB85E-CB connects some general-purpose I/O pins on the
-	   CPU to the RTS/CTS lines the UART's serial connection, as follows:
-	   P00 = CTS (in), P01 = DSR (in), P02 = RTS (out), P03 = DTR (out). */
-
-	TEG_PORT0_PM = 0x03;	/* P00 and P01 inputs, P02 and P03 outputs */
-	TEG_PORT0_IO = 0x03;	/* Accept input */
-
-	/* Do pre-configuration for the actual UART.  */
-	teg_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	teg_init_irqs ();
-	rte_cb_init_irqs ();
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.ld b/arch/v850/kernel/rte_nb85e_cb.ld
deleted file mode 100644
index b672f484f08..00000000000
--- a/arch/v850/kernel/rte_nb85e_cb.ld
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E).  */
-
-MEMORY {
-	LOW   : ORIGIN = 0x0,	     LENGTH = 0x00100000
-	/* 1MB of SRAM  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 16MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > LOW
-	.sram : { RAMK_KRAM_CONTENTS } > KRAM
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/setup.c b/arch/v850/kernel/setup.c
deleted file mode 100644
index 10335cecf7b..00000000000
--- a/arch/v850/kernel/setup.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * arch/v850/kernel/setup.c -- Arch-dependent initialization functions
- *
- *  Copyright (C) 2001,02,03,05,06  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05,06  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/swap.h>		/* we don't have swap, but for nr_free_pages */
-#include <linux/irq.h>
-#include <linux/reboot.h>
-#include <linux/personality.h>
-#include <linux/major.h>
-#include <linux/root_dev.h>
-#include <linux/mtd/mtd.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include "mach.h"
-
-/* These symbols are all defined in the linker map to delineate various
-   statically allocated regions of memory.  */
-
-extern char _intv_start, _intv_end;
-/* `kram' is only used if the kernel uses part of normal user RAM.  */
-extern char _kram_start __attribute__ ((__weak__));
-extern char _kram_end __attribute__ ((__weak__));
-extern char _init_start, _init_end;
-extern char _bootmap;
-extern char _stext, _etext, _sdata, _edata, _sbss, _ebss;
-/* Many platforms use an embedded root image.  */
-extern char _root_fs_image_start __attribute__ ((__weak__));
-extern char _root_fs_image_end __attribute__ ((__weak__));
-
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-/* Memory not used by the kernel.  */
-static unsigned long total_ram_pages;
-
-/* System RAM.  */
-static unsigned long ram_start = 0, ram_len = 0;
-
-
-#define ADDR_TO_PAGE_UP(x)   ((((unsigned long)x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define ADDR_TO_PAGE(x)	     (((unsigned long)x) >> PAGE_SHIFT)
-#define PAGE_TO_ADDR(x)	     (((unsigned long)x) << PAGE_SHIFT)
-
-static void init_mem_alloc (unsigned long ram_start, unsigned long ram_len);
-
-void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-
-void __init setup_arch (char **cmdline)
-{
-	/* Keep a copy of command line */
-	*cmdline = command_line;
-	memcpy (boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
-	console_verbose ();
-
-	init_mm.start_code = (unsigned long) &_stext;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) &_kram_end;
-
-	/* Find out what mem this machine has.  */
-	mach_get_physical_ram (&ram_start, &ram_len);
-	/* ... and tell the kernel about it.  */
-	init_mem_alloc (ram_start, ram_len);
-
-	printk (KERN_INFO "CPU: %s\nPlatform: %s\n",
-		CPU_MODEL_LONG, PLATFORM_LONG);
-
-	/* do machine-specific setups.  */
-	mach_setup (cmdline);
-
-#ifdef CONFIG_MTD
-	if (!ROOT_DEV && &_root_fs_image_end > &_root_fs_image_start)
-		set_mem_root (&_root_fs_image_start,
-			      &_root_fs_image_end - &_root_fs_image_start,
-			      *cmdline);
-#endif
-}
-
-void __init trap_init (void)
-{
-}
-
-#ifdef CONFIG_MTD
-
-/* From drivers/mtd/devices/slram.c */
-#define SLRAM_BLK_SZ 0x4000
-
-/* Set the root filesystem to be the given memory region.
-   Some parameter may be appended to CMD_LINE.  */
-void set_mem_root (void *addr, size_t len, char *cmd_line)
-{
-	/* Some sort of idiocy in MTD means we must supply a length that's
-	   a multiple of SLRAM_BLK_SZ.  We just round up the real length,
-	   as the file system shouldn't attempt to access anything beyond
-	   the end of the image anyway.  */
-	len = (((len - 1) + SLRAM_BLK_SZ) / SLRAM_BLK_SZ) * SLRAM_BLK_SZ;
-
-	/* The only way to pass info to the MTD slram driver is via
-	   the command line.  */
-	if (*cmd_line) {
-		cmd_line += strlen (cmd_line);
-		*cmd_line++ = ' ';
-	}
-	sprintf (cmd_line, "slram=root,0x%x,+0x%x", (u32)addr, (u32)len);
-
-	ROOT_DEV = MKDEV (MTD_BLOCK_MAJOR, 0);
-}
-#endif
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static void nmi_end (unsigned irq)
-{
-	if (irq != IRQ_NMI (0)) {
-		printk (KERN_CRIT "NMI %d is unrecoverable; restarting...",
-			irq - IRQ_NMI (0));
-		machine_restart (0);
-	}
-}
-
-static struct hw_interrupt_type nmi_irq_type = {
-	.typename = "NMI",
-	.startup = irq_zero,		/* startup */
-	.shutdown = irq_nop,		/* shutdown */
-	.enable = irq_nop,		/* enable */
-	.disable = irq_nop,		/* disable */
-	.ack = irq_nop,		/* ack */
-	.end = nmi_end,		/* end */
-};
-
-void __init init_IRQ (void)
-{
-	init_irq_handlers (0, NUM_MACH_IRQS, 1, 0);
-	init_irq_handlers (IRQ_NMI (0), NUM_NMIS, 1, &nmi_irq_type);
-	mach_init_irqs ();
-}
-
-
-void __init mem_init (void)
-{
-	max_mapnr = MAP_NR (ram_start + ram_len);
-
-	num_physpages = ADDR_TO_PAGE (ram_len);
-
-	total_ram_pages = free_all_bootmem ();
-
-	printk (KERN_INFO
-		"Memory: %luK/%luK available"
-		" (%luK kernel code, %luK data)\n",
-		PAGE_TO_ADDR (nr_free_pages()) / 1024,
-		ram_len / 1024,
-		((unsigned long)&_etext - (unsigned long)&_stext) / 1024,
-		((unsigned long)&_ebss - (unsigned long)&_sdata) / 1024);
-}
-
-void free_initmem (void)
-{
-	unsigned long ram_end = ram_start + ram_len;
-	unsigned long start = PAGE_ALIGN ((unsigned long)(&_init_start));
-
-	if (start >= ram_start && start < ram_end) {
-		unsigned long addr;
-		unsigned long end = PAGE_ALIGN ((unsigned long)(&_init_end));
-
-		if (end > ram_end)
-			end = ram_end;
-
-		printk("Freeing unused kernel memory: %ldK freed\n",
-		       (end - start) / 1024);
-
-		for (addr = start; addr < end; addr += PAGE_SIZE) {
-			struct page *page = virt_to_page (addr);
-			ClearPageReserved (page);
-			init_page_count (page);
-			__free_page (page);
-			total_ram_pages++;
-		}
-	}
-}
-
-
-/* Initialize the `bootmem allocator'.  RAM_START and RAM_LEN identify
-   what RAM may be used.  */
-static void __init
-init_bootmem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-	/* The part of the kernel that's in the same managed RAM space
-	   used for general allocation.  */
-	unsigned long kram_start = (unsigned long)&_kram_start;
-	unsigned long kram_end = (unsigned long)&_kram_end;
-	/* End of the managed RAM space.  */
-	unsigned long ram_end = ram_start + ram_len;
-	/* Address range of the interrupt vector table.  */
-	unsigned long intv_start = (unsigned long)&_intv_start;
-	unsigned long intv_end = (unsigned long)&_intv_end;
-	/* True if the interrupt vectors are in the managed RAM area.  */
-	int intv_in_ram = (intv_end > ram_start && intv_start < ram_end);
-	/* True if the interrupt vectors are inside the kernel's RAM.  */
-	int intv_in_kram = (intv_end > kram_start && intv_start < kram_end);
-	/* A pointer to an optional function that reserves platform-specific
-	   memory regions.  We declare the pointer `volatile' to avoid gcc
-	   turning the call into a static call (the problem is that since
-	   it's a weak symbol, a static call may end up trying to reference
-	   the location 0x0, which is not always reachable).  */
-	void (*volatile mrb) (void) = mach_reserve_bootmem;
-	/* The bootmem allocator's allocation bitmap.  */
-	unsigned long bootmap = (unsigned long)&_bootmap;
-	unsigned long bootmap_len;
-
-	/* Round bootmap location up to next page.  */
-	bootmap = PAGE_TO_ADDR (ADDR_TO_PAGE_UP (bootmap));
-
-	/* Initialize bootmem allocator.  */
-	bootmap_len = init_bootmem_node (NODE_DATA (0),
-					 ADDR_TO_PAGE (bootmap),
-					 ADDR_TO_PAGE (PAGE_OFFSET),
-					 ADDR_TO_PAGE (ram_end));
-
-	/* Now make the RAM actually allocatable (it starts out `reserved'). */
-	free_bootmem (ram_start, ram_len);
-
-	if (kram_end > kram_start)
-		/* Reserve the RAM part of the kernel's address space, so it
-		   doesn't get allocated.  */
-		reserve_bootmem(kram_start, kram_end - kram_start,
-				BOOTMEM_DEFAULT);
-	
-	if (intv_in_ram && !intv_in_kram)
-		/* Reserve the interrupt vector space.  */
-		reserve_bootmem(intv_start, intv_end - intv_start,
-				BOOTMEM_DEFAULT);
-
-	if (bootmap >= ram_start && bootmap < ram_end)
-		/* Reserve the bootmap space.  */
-		reserve_bootmem(bootmap, bootmap_len,
-				BOOTMEM_DEFAULT);
-
-	/* Reserve the memory used by the root filesystem image if it's
-	   in RAM.  */
-	if (&_root_fs_image_end > &_root_fs_image_start
-	    && (unsigned long)&_root_fs_image_start >= ram_start
-	    && (unsigned long)&_root_fs_image_start < ram_end)
-		reserve_bootmem ((unsigned long)&_root_fs_image_start,
-				 &_root_fs_image_end - &_root_fs_image_start,
-				 BOOTMEM_DEFAULT);
-
-	/* Let the platform-dependent code reserve some too.  */
-	if (mrb)
-		(*mrb) ();
-}
-
-/* Tell the kernel about what RAM it may use for memory allocation.  */
-static void __init
-init_mem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-	unsigned i;
-	unsigned long zones_size[MAX_NR_ZONES];
-
-	init_bootmem_alloc (ram_start, ram_len);
-
-	for (i = 0; i < MAX_NR_ZONES; i++)
-		zones_size[i] = 0;
-
-	/* We stuff all the memory into one area, which includes the
-	   initial gap from PAGE_OFFSET to ram_start.  */
-	zones_size[ZONE_DMA]
-		= ADDR_TO_PAGE (ram_len + (ram_start - PAGE_OFFSET));
-
-	/* The allocator is very picky about the address of the first
-	   allocatable page -- it must be at least as aligned as the
-	   maximum allocation -- so try to detect cases where it will get
-	   confused and signal them at compile time (this is a common
-	   problem when porting to a new platform with ).  There is a
-	   similar runtime check in free_area_init_core.  */
-#if ((PAGE_OFFSET >> PAGE_SHIFT) & ((1UL << (MAX_ORDER - 1)) - 1))
-#error MAX_ORDER is too large for given PAGE_OFFSET (use CONFIG_FORCE_MAX_ZONEORDER to change it)
-#endif
-	NODE_DATA(0)->node_mem_map = NULL;
-	free_area_init_node(0, zones_size, ADDR_TO_PAGE (PAGE_OFFSET), 0);
-}
-
-
-
-/* Taken from m68knommu */
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
diff --git a/arch/v850/kernel/signal.c b/arch/v850/kernel/signal.c
deleted file mode 100644
index bf166e7e762..00000000000
--- a/arch/v850/kernel/signal.c
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- * arch/v850/kernel/signal.c -- Signal handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1999,2000,2002  Niibe Yutaka & Kaz Kojima
- *  Copyright (C) 1991,1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * 1997-11-28  Modified for POSIX.1b signals by Richard Henderson
- *
- * This file was derived from the sh version, arch/sh/kernel/signal.c
- */
-
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/tty.h>
-
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/thread_info.h>
-#include <asm/cacheflush.h>
-
-#define DEBUG_SIG 0
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
-	sigset_t saveset;
-
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->gpr[GPR_RVAL] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
-		  struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->gpr[GPR_RVAL] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset))
-			return -EINTR;
-	}
-}
-
-asmlinkage int 
-sys_sigaction(int sig, const struct old_sigaction *act,
-	      struct old_sigaction *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-asmlinkage int
-sys_sigaltstack(const stack_t *uss, stack_t *uoss,
-		struct pt_regs *regs)
-{
-	return do_sigaltstack(uss, uoss, regs->gpr[GPR_SP]);
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-struct sigframe
-{
-	struct sigcontext sc;
-	unsigned long extramask[_NSIG_WORDS-1];
-	unsigned long tramp[2];	/* signal trampoline */
-};
-
-struct rt_sigframe
-{
-	struct siginfo info;
-	struct ucontext uc;
-	unsigned long tramp[2];	/* signal trampoline */
-};
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
-{
-	unsigned int err = 0;
-
-#define COPY(x)		err |= __get_user(regs->x, &sc->regs.x)
-	COPY(gpr[0]);	COPY(gpr[1]);	COPY(gpr[2]);	COPY(gpr[3]);
-	COPY(gpr[4]);	COPY(gpr[5]);	COPY(gpr[6]);	COPY(gpr[7]);
-	COPY(gpr[8]);	COPY(gpr[9]);	COPY(gpr[10]);	COPY(gpr[11]);
-	COPY(gpr[12]);	COPY(gpr[13]);	COPY(gpr[14]);	COPY(gpr[15]);
-	COPY(gpr[16]);	COPY(gpr[17]);	COPY(gpr[18]);	COPY(gpr[19]);
-	COPY(gpr[20]);	COPY(gpr[21]);	COPY(gpr[22]);	COPY(gpr[23]);
-	COPY(gpr[24]);	COPY(gpr[25]);	COPY(gpr[26]);	COPY(gpr[27]);
-	COPY(gpr[28]);	COPY(gpr[29]);	COPY(gpr[30]);	COPY(gpr[31]);
-	COPY(pc);	COPY(psw);
-	COPY(ctpc);	COPY(ctpsw);	COPY(ctbp);
-#undef COPY
-
-	return err;
-}
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-	struct sigframe *frame = (struct sigframe *)regs->gpr[GPR_SP];
-	sigset_t set;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-	    || (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-				    sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->sc, &rval))
-		goto badframe;
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe *frame = (struct rt_sigframe *)regs->gpr[GPR_SP];
-	sigset_t set;
-	stack_t st;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
-		goto badframe;
-
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
-	/* It is more difficult to avoid calling this function than to
-	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, regs->gpr[GPR_SP]);
-
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}	
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
-		 unsigned long mask)
-{
-	int err = 0;
-
-#define COPY(x)		err |= __put_user(regs->x, &sc->regs.x)
-	COPY(gpr[0]);	COPY(gpr[1]);	COPY(gpr[2]);	COPY(gpr[3]);
-	COPY(gpr[4]);	COPY(gpr[5]);	COPY(gpr[6]);	COPY(gpr[7]);
-	COPY(gpr[8]);	COPY(gpr[9]);	COPY(gpr[10]);	COPY(gpr[11]);
-	COPY(gpr[12]);	COPY(gpr[13]);	COPY(gpr[14]);	COPY(gpr[15]);
-	COPY(gpr[16]);	COPY(gpr[17]);	COPY(gpr[18]);	COPY(gpr[19]);
-	COPY(gpr[20]);	COPY(gpr[21]);	COPY(gpr[22]);	COPY(gpr[23]);
-	COPY(gpr[24]);	COPY(gpr[25]);	COPY(gpr[26]);	COPY(gpr[27]);
-	COPY(gpr[28]);	COPY(gpr[29]);	COPY(gpr[30]);	COPY(gpr[31]);
-	COPY(pc);	COPY(psw);
-	COPY(ctpc);	COPY(ctpsw);	COPY(ctbp);
-#undef COPY
-
-	err |= __put_user(mask, &sc->oldmask);
-
-	return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
-	/* Default to using normal stack */
-	unsigned long sp = regs->gpr[GPR_SP];
-
-	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-	return (void *)((sp - frame_size) & -8UL);
-}
-
-static void setup_frame(int sig, struct k_sigaction *ka,
-			sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
-	if (_NSIG_WORDS > 1) {
-		err |= __copy_to_user(frame->extramask, &set->sig[1],
-				      sizeof(frame->extramask));
-	}
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-	} else {
-		/* Note, these encodings are _little endian_!  */
-
-		/* addi  __NR_sigreturn, r0, r12  */
-		err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-				  frame->tramp + 0);
-		/* trap 0 */
-		err |= __put_user(0x010007e0,
-				  frame->tramp + 1);
-
-		regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-		flush_cache_sigtramp (regs->gpr[GPR_LP]);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler.  */
-	regs->pc = (v850_reg_t) ka->sa.sa_handler;
-	regs->gpr[GPR_SP] = (v850_reg_t)frame;
-	/* Signal handler args:  */
-	regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-	regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->sc;/* arg 1: sigcontext */
-
-	set_fs(USER_DS);
-
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx ra=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, );
-#endif
-
-	return;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-}
-
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			   sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= copy_siginfo_to_user(&frame->info, info);
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user((void *)current->sas_ss_sp,
-			  &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->gpr[GPR_SP]),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext,
-			        regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-	} else {
-		/* Note, these encodings are _little endian_!  */
-
-		/* addi  __NR_sigreturn, r0, r12  */
-		err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-				  frame->tramp + 0);
-		/* trap 0 */
-		err |= __put_user(0x010007e0,
-				  frame->tramp + 1);
-
-		regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-		flush_cache_sigtramp (regs->gpr[GPR_LP]);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler.  */
-	regs->pc = (v850_reg_t) ka->sa.sa_handler;
-	regs->gpr[GPR_SP] = (v850_reg_t)frame;
-	/* Signal handler args:  */
-	regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-	regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->info; /* arg 1: siginfo */
-	regs->gpr[GPR_ARG2] = (v850_reg_t)&frame->uc; /* arg 2: ucontext */
-
-	set_fs(USER_DS);
-
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, regs->pr);
-#endif
-
-	return;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-}
-
-/*
- * OK, we're invoking a handler
- */	
-
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-	      sigset_t *oldset,	struct pt_regs * regs)
-{
-	/* Are we from a system call? */
-	if (PT_REGS_SYSCALL (regs)) {
-		/* If so, check system call restarting.. */
-		switch (regs->gpr[GPR_RVAL]) {
-		case -ERESTART_RESTARTBLOCK:
-			current_thread_info()->restart_block.fn =
-				do_no_restart_syscall;
-			/* fall through */
-		case -ERESTARTNOHAND:
-			regs->gpr[GPR_RVAL] = -EINTR;
-			break;
-
-		case -ERESTARTSYS:
-			if (!(ka->sa.sa_flags & SA_RESTART)) {
-				regs->gpr[GPR_RVAL] = -EINTR;
-				break;
-			}
-			/* fallthrough */
-		case -ERESTARTNOINTR:
-			regs->gpr[12] = PT_REGS_SYSCALL (regs);
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-
-		PT_REGS_SET_SYSCALL (regs, 0);
-	}
-
-	/* Set up the stack frame */
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(sig, ka, info, oldset, regs);
-	else
-		setup_frame(sig, ka, oldset, regs);
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
-{
-	siginfo_t info;
-	int signr;
-	struct k_sigaction ka;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return 1;
-
-	if (!oldset)
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
-
-	/* Did we come from a system call? */
-	if (PT_REGS_SYSCALL (regs)) {
-		int rval = (int)regs->gpr[GPR_RVAL];
-		/* Restart the system call - no handlers present */
-		if (rval == -ERESTARTNOHAND
-		    || rval == -ERESTARTSYS
-		    || rval == -ERESTARTNOINTR)
-		{
-			regs->gpr[12] = PT_REGS_SYSCALL (regs);
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-		else if (rval == -ERESTART_RESTARTBLOCK) {
-			regs->gpr[12] = __NR_restart_syscall;
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-	}
-	return 0;
-}
diff --git a/arch/v850/kernel/sim.c b/arch/v850/kernel/sim.c
deleted file mode 100644
index 467b4aa0acd..00000000000
--- a/arch/v850/kernel/sim.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/v850/kernel/sim.c -- Machine-specific stuff for GDB v850e simulator
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/simsyscall.h>
-
-#include "mach.h"
-
-/* The name of a file containing the root filesystem.  */
-#define ROOT_FS "rootfs.image"
-
-extern void simcons_setup (void);
-extern void simcons_poll_ttys (void);
-extern void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-static int read_file (const char *name,
-		      unsigned long *addr, unsigned long *len,
-		      const char **err);
-
-void __init mach_setup (char **cmdline)
-{
-	const char *err;
-	unsigned long root_dev_addr, root_dev_len;
-
-	simcons_setup ();
-
-	printk (KERN_INFO "Reading root filesystem: %s", ROOT_FS);
-
-	if (read_file (ROOT_FS, &root_dev_addr, &root_dev_len, &err)) {
-		printk (" (size %luK)\n", root_dev_len / 1024);
-		set_mem_root ((void *)root_dev_addr, (size_t)root_dev_len,
-			      *cmdline);
-	} else
-		printk ("...%s failed!\n", err);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = RAM_ADDR;
-	*ram_len = RAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* ...do magic timer initialization?...  */
-	mach_tick = simcons_poll_ttys;
-	setup_irq (0, timer_action);
-}
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static struct hw_interrupt_type sim_irq_type = {
-	.typename = "IRQ",
-	.startup = irq_zero,		/* startup */
-	.shutdown = irq_nop,		/* shutdown */
-	.enable = irq_nop,		/* enable */
-	.disable = irq_nop,		/* disable */
-	.ack = irq_nop,		/* ack */
-	.end = irq_nop,		/* end */
-};
-
-void __init mach_init_irqs (void)
-{
-	init_irq_handlers (0, NUM_MACH_IRQS, 1, &sim_irq_type);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	long timeval[2], timezone[2];
-	int rval = V850_SIM_SYSCALL (gettimeofday, timeval, timezone);
-	if (rval == 0) {
-		tv->tv_sec = timeval[0];
-		tv->tv_nsec = timeval[1] * 1000;
-	}
-}
-
-void machine_restart (char *__unused)
-{
-	V850_SIM_SYSCALL (write, 1, "RESTART\n", 8);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_halt (void)
-{
-	V850_SIM_SYSCALL (write, 1, "HALT\n", 5);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_power_off (void)
-{
-	V850_SIM_SYSCALL (write, 1, "POWER OFF\n", 10);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-
-/* Load data from a file called NAME into ram.  The address and length
-   of the data image are returned in ADDR and LEN.  */
-static int __init
-read_file (const char *name,
-	   unsigned long *addr, unsigned long *len,
-	   const char **err)
-{
-	int rval, fd;
-	unsigned long cur, left;
-	/* Note this is not a normal stat buffer, it's an ad-hoc
-	   structure defined by the simulator.  */
-	unsigned long stat_buf[10];
-
-	/* Stat the file to find out the length.  */
-	rval = V850_SIM_SYSCALL (stat, name, stat_buf);
-	if (rval < 0) {
-		if (err) *err = "stat";
-		return 0;
-	}
-	*len = stat_buf[4];
-
-	/* Open the file; `0' is O_RDONLY.  */
-	fd = V850_SIM_SYSCALL (open, name, 0);
-	if (fd < 0) {
-		if (err) *err = "open";
-		return 0;
-	}
-
-	*addr = (unsigned long)alloc_bootmem(*len);
-	if (! *addr) {
-		V850_SIM_SYSCALL (close, fd);
-		if (err) *err = "alloc_bootmem";
-		return 0;
-	}
-
-	cur = *addr;
-	left = *len;
-	while (left > 0) {
-		int chunk = V850_SIM_SYSCALL (read, fd, cur, left);
-		if (chunk <= 0)
-			break;
-		cur += chunk;
-		left -= chunk;
-	}
-	V850_SIM_SYSCALL (close, fd);
-	if (left > 0) {
-		/* Some read failed.  */
-		free_bootmem (*addr, *len);
-		if (err) *err = "read";
-		return 0;
-	}
-
-	return 1;
-}
diff --git a/arch/v850/kernel/sim.ld b/arch/v850/kernel/sim.ld
deleted file mode 100644
index 101885f3c9f..00000000000
--- a/arch/v850/kernel/sim.ld
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Linker script for the gdb v850e simulator (CONFIG_V850E_SIM).  */
-
-MEMORY {
-	/* Interrupt vectors.  */
-	INTV  : ORIGIN = 0x0, LENGTH = 0xe0
-	/* Main RAM.  */
-	RAM   : ORIGIN = RAM_ADDR, LENGTH = RAM_SIZE
-}
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > INTV
-	.ram : { RAMK_KRAM_CONTENTS } > RAM
-}
diff --git a/arch/v850/kernel/sim85e2.c b/arch/v850/kernel/sim85e2.c
deleted file mode 100644
index 566dde5e607..00000000000
--- a/arch/v850/kernel/sim85e2.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/v850/kernel/sim85e2.c -- Machine-specific stuff for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-
-/* There are 4 possible areas we can use:
-
-     IRAM (1MB) is fast for instruction fetches, but slow for data
-     DRAM (1020KB) is fast for data, but slow for instructions
-     ERAM is cached, so should be fast for both insns and data
-     SDRAM is external DRAM, similar to ERAM
-*/
-
-#define INIT_MEMC_FOR_SDRAM
-#define USE_SDRAM_AREA
-#define KERNEL_IN_SDRAM_AREA
-
-#define DCACHE_MODE	V850E2_CACHE_BTSC_DCM_WT
-/*#define DCACHE_MODE	V850E2_CACHE_BTSC_DCM_WB_ALLOC*/
-
-#ifdef USE_SDRAM_AREA
-#define RAM_START 	SDRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-#else
-/* When we use DRAM, we need to account for the fact that the end of it is
-   used for R0_RAM.  */
-#define RAM_START	DRAM_ADDR
-#define RAM_END		R0_RAM_ADDR
-#endif
-
-
-extern void memcons_setup (void);
-
-
-#ifdef KERNEL_IN_SDRAM_AREA
-#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text")))
-#else
-#define EARLY_INIT_SECTION_ATTR __init
-#endif
-
-void EARLY_INIT_SECTION_ATTR mach_early_init (void)
-{
-	/* The sim85e2 simulator tracks `undefined' values, so to make
-	   debugging easier, we begin by zeroing out all otherwise
-	   undefined registers.  This is not strictly necessary.
-
-	   The registers we zero are:
-	       Every GPR except:
-	           stack-pointer (r3)
-		   task-pointer (r16)
-		   our return addr (r31)
-	       Every system register (SPR) that we know about except for
-	       the PSW (SPR 5), which we zero except for the
-	       disable-interrupts bit.
-	*/
-
-	/* GPRs */
-	asm volatile ("             mov r0, r1 ; mov r0, r2              ");
-	asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 ");
-	asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11");
-	asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15");
-	asm volatile ("             mov r0, r17; mov r0, r18; mov r0, r19");
-	asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23");
-	asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27");
-	asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30");
-
-	/* SPRs */
-	asm volatile ("ldsr r0, 0;  ldsr r0, 1;  ldsr r0, 2;  ldsr r0, 3");
-	asm volatile ("ldsr r0, 4");
-	asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */
-	asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19");
-	asm volatile ("ldsr r0, 20");
-
-
-#ifdef INIT_MEMC_FOR_SDRAM
-	/* Settings for SDRAM controller.  */
-	V850E2_VSWC   = 0x0042;
-	V850E2_BSC    = 0x9286;
-	V850E2_BCT(0) = 0xb000;	/* was: 0 */
-	V850E2_BCT(1) = 0x000b;
-	V850E2_ASC    = 0;
-	V850E2_LBS    = 0xa9aa;	/* was: 0xaaaa */
-	V850E2_LBC(0) = 0;
-	V850E2_LBC(1) = 0;	/* was: 0x3 */
-	V850E2_BCC    = 0;
-	V850E2_RFS(4) = 0x800a;	/* was: 0xf109 */
-	V850E2_SCR(4) = 0x2091;	/* was: 0x20a1 */
-	V850E2_RFS(3) = 0x800c;
-	V850E2_SCR(3) = 0x20a1;
-	V850E2_DWC(0) = 0;
-	V850E2_DWC(1) = 0;
-#endif
-
-#if 0
-#ifdef CONFIG_V850E2_SIM85E2S
-	/* Turn on the caches.  */
-	V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE;
-	V850E2_BHC  = 0x1010;
-#elif CONFIG_V850E2_SIM85E2C
-	V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0);
-	V850E2_BUSM_BHC = 0xFFFF;
-#endif
-#else
-	V850E2_BHC  = 0;
-#endif
-
-	/* Don't stop the simulator at `halt' instructions.  */
-	SIM85E2_NOTHAL = 1;
-
-	/* Ensure that the simulator halts on a panic, instead of going
-	   into an infinite loop inside the panic function.  */
-	panic_timeout = -1;
-}
-
-void __init mach_setup (char **cmdline)
-{
-	memcons_setup ();
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* The simulator actually cycles through all interrupts
-	   periodically.  We just pay attention to IRQ0, which gives us
-	   1/64 the rate of the periodic interrupts.  */
-	setup_irq (0, timer_action);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
-	{ 0 }
-};
-struct hw_interrupt_type hw_itypes[1];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-	SIM85E2_SIMFIN = 0;	/* Halt immediately.  */
-	for (;;) {}
-}
-
-void machine_restart (char *__unused)
-{
-	machine_halt ();
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
diff --git a/arch/v850/kernel/sim85e2.ld b/arch/v850/kernel/sim85e2.ld
deleted file mode 100644
index 7470fd2ffb5..00000000000
--- a/arch/v850/kernel/sim85e2.ld
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Linker script for the sim85e2c simulator, which is a verilog simulation of
-   the V850E2 NA85E2C cpu core (CONFIG_V850E2_SIM85E2C).  */
-
-MEMORY {
-	/* 1MB of `instruction RAM', starting at 0.
-	   Instruction fetches are much faster from IRAM than from DRAM.  */
-	IRAM : ORIGIN = IRAM_ADDR, LENGTH = IRAM_SIZE
-
-	/* 1MB of `data RAM', below and contiguous with the I/O space.
-	   Data fetches are much faster from DRAM than from IRAM.  */
-	DRAM : ORIGIN = DRAM_ADDR, LENGTH = DRAM_SIZE
-
-	/* `external ram' (CS1 area), comes after IRAM.  */
-	ERAM : ORIGIN = ERAM_ADDR, LENGTH = ERAM_SIZE
-
-	/* Dynamic RAM; uses memory controller.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.iram : {
-		INTV_CONTENTS
-		*arch/v850/kernel/head.o
-		*(.early.text)
-	} > IRAM
-	.dram : {
-		_memcons_output = . ;
-		. = . + 0x8000 ;
-		_memcons_output_end = . ;
-	} > DRAM
-	.sdram : {
-		/* We stick console output into a buffer here.  */
-		RAMK_KRAM_CONTENTS
-		ROOT_FS_CONTENTS
-	} > SDRAM
-}
diff --git a/arch/v850/kernel/simcons.c b/arch/v850/kernel/simcons.c
deleted file mode 100644
index 9973596ae30..00000000000
--- a/arch/v850/kernel/simcons.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/v850/kernel/simcons.c -- Console I/O for GDB v850e simulator
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-#include <asm/poll.h>
-#include <asm/string.h>
-#include <asm/simsyscall.h>
-
-
-/*  Low-level console. */
-
-static void simcons_write (struct console *co, const char *buf, unsigned len)
-{
-	V850_SIM_SYSCALL (write, 1, buf, len);
-}
-
-static int simcons_read (struct console *co, char *buf, unsigned len)
-{
-	return V850_SIM_SYSCALL (read, 0, buf, len);
-}
-
-static struct tty_driver *tty_driver;
-static struct tty_driver *simcons_device (struct console *c, int *index)
-{
-	*index = c->index;
-	return tty_driver;
-}
-
-static struct console simcons =
-{
-    .name	= "simcons",
-    .write	= simcons_write,
-    .read	= simcons_read,
-    .device	= simcons_device,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-/* Higher level TTY interface.  */
-
-int simcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-int simcons_tty_write (struct tty_struct *tty,
-		       const unsigned char *buf, int count)
-{
-	return V850_SIM_SYSCALL (write, 1, buf, count);
-}
-
-int simcons_tty_write_room (struct tty_struct *tty)
-{
-	/* Completely arbitrary.  */
-	return 0x100000;
-}
-
-int simcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-	/* We have no buffer.  */
-	return 0;
-}
-
-static const struct tty_operations ops = {
-	.open = simcons_tty_open,
-	.write = simcons_tty_write,
-	.write_room = simcons_tty_write_room,
-	.chars_in_buffer = simcons_tty_chars_in_buffer,
-};
-
-int __init simcons_tty_init (void)
-{
-	struct tty_driver *driver = alloc_tty_driver(1);
-	int err;
-	if (!driver)
-		return -ENOMEM;
-	driver->name = "simcons";
-	driver->major = TTY_MAJOR;
-	driver->minor_start = 64;
-	driver->type = TTY_DRIVER_TYPE_SYSCONS;
-	driver->init_termios = tty_std_termios;
-	tty_set_operations(driver, &ops);
-	err = tty_register_driver(driver);
-	if (err) {
-		put_tty_driver(driver);
-		return err;
-	}
-	tty_driver = driver;
-	return 0;
-}
-/* We use `late_initcall' instead of just `__initcall' as a workaround for
-   the fact that (1) simcons_tty_init can't be called before tty_init,
-   (2) tty_init is called via `module_init', (3) if statically linked,
-   module_init == device_init, and (4) there's no ordering of init lists.
-   We can do this easily because simcons is always statically linked, but
-   other tty drivers that depend on tty_init and which must use
-   `module_init' to declare their init routines are likely to be broken.  */
-late_initcall(simcons_tty_init);
-
-/* Poll for input on the console, and if there's any, deliver it to the
-   tty driver.  */
-void simcons_poll_tty (struct tty_struct *tty)
-{
-	char buf[32];	/* Not the nicest way to do it but I need it correct first */
-	int flip = 0, send_break = 0;
-	struct pollfd pfd;
-	pfd.fd = 0;
-	pfd.events = POLLIN;
-
-	if (V850_SIM_SYSCALL (poll, &pfd, 1, 0) > 0) {
-		if (pfd.revents & POLLIN) {
-			/* Real block hardware knows the transfer size before
-			   transfer so the new tty buffering doesn't try to handle
-			   this rather weird simulator specific case well */
-			int rd = V850_SIM_SYSCALL (read, 0, buf, 32);
-			if (rd > 0) {
-				tty_insert_flip_string(tty, buf, rd);
-				flip = 1;
-			} else
-				send_break = 1;
-		} else if (pfd.revents & POLLERR)
-			send_break = 1;
-	}
-
-	if (send_break) {
-		tty_insert_flip_char (tty, 0, TTY_BREAK);		
-		flip = 1;
-	}
-
-	if (flip)
-		tty_schedule_flip (tty);
-}
-
-void simcons_poll_ttys (void)
-{
-	if (tty_driver && tty_driver->ttys[0])
-		simcons_poll_tty (tty_driver->ttys[0]);
-}
-
-void simcons_setup (void)
-{
-	V850_SIM_SYSCALL (make_raw, 0);
-	register_console (&simcons);
-	printk (KERN_INFO "Console: GDB V850E simulator stdio\n");
-}
diff --git a/arch/v850/kernel/syscalls.c b/arch/v850/kernel/syscalls.c
deleted file mode 100644
index 1a83daf8e24..00000000000
--- a/arch/v850/kernel/syscalls.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * arch/v850/kernel/syscalls.c -- Various system-call definitions not
- * 	defined in machine-independent code
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was derived the ppc version, arch/ppc/kernel/syscalls.c
- * ... which was derived from "arch/i386/kernel/sys_i386.c" by Gary Thomas;
- *     modified by Cort Dougan (cort@cs.nmt.edu)
- *     and Paul Mackerras (paulus@cs.anu.edu.au).
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/syscalls.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/mman.h>
-#include <linux/sys.h>
-#include <linux/ipc.h>
-#include <linux/utsname.h>
-#include <linux/file.h>
-
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-int
-sys_ipc (uint call, int first, int second, int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -EINVAL;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semop (first, (struct sembuf *)ptr, second);
-		break;
-	case SEMGET:
-		ret = sys_semget (first, second, third);
-		break;
-	case SEMCTL:
-	{
-		union semun fourth;
-
-		if (!ptr)
-			break;
-		if ((ret = access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-		    || (ret = get_user(fourth.__pad, (void **)ptr)))
-			break;
-		ret = sys_semctl (first, second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd (first, (struct msgbuf *) ptr, second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			if (!ptr)
-				break;
-			if ((ret = access_ok(VERIFY_READ, ptr, sizeof(tmp)) ? 0 : -EFAULT)
-			    || (ret = copy_from_user(&tmp,
-						(struct ipc_kludge *) ptr,
-						sizeof (tmp))))
-				break;
-			ret = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp,
-					  third);
-			break;
-			}
-		default:
-			ret = sys_msgrcv (first, (struct msgbuf *) ptr,
-					  second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget ((key_t) first, second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl (first, second, (struct msqid_ds *) ptr);
-		break;
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-
-			if ((ret = access_ok(VERIFY_WRITE, (ulong*) third,
-					       sizeof(ulong)) ? 0 : -EFAULT))
-				break;
-			ret = do_shmat (first, (char *) ptr, second, &raddr);
-			if (ret)
-				break;
-			ret = put_user (raddr, (ulong *) third);
-			break;
-			}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				break;
-			ret = do_shmat (first, (char *) ptr, second,
-					 (ulong *) third);
-			break;
-		}
-		break;
-	case SHMDT: 
-		ret = sys_shmdt ((char *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget (first, second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl (first, second, (struct shmid_ds *) ptr);
-		break;
-	}
-
-	return ret;
-}
-
-static inline unsigned long
-do_mmap2 (unsigned long addr, size_t len,
-	 unsigned long prot, unsigned long flags,
-	 unsigned long fd, unsigned long pgoff)
-{
-	struct file * file = NULL;
-	int ret = -EBADF;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (! (flags & MAP_ANONYMOUS)) {
-		if (!(file = fget (fd)))
-			goto out;
-	}
-	
-	down_write (&current->mm->mmap_sem);
-	ret = do_mmap_pgoff (file, addr, len, prot, flags, pgoff);
-	up_write (&current->mm->mmap_sem);
-	if (file)
-		fput (file);
-out:
-	return ret;
-}
-
-unsigned long sys_mmap2 (unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff)
-{
-	return do_mmap2 (addr, len, prot, flags, fd, pgoff);
-}
-
-unsigned long sys_mmap (unsigned long addr, size_t len,
-		       unsigned long prot, unsigned long flags,
-		       unsigned long fd, off_t offset)
-{
-	int err = -EINVAL;
-
-	if (offset & ~PAGE_MASK)
-		goto out;
-
-	err = do_mmap2 (addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
-out:
-	return err;
-}
-
-/*
- * Do a system call from kernel instead of calling sys_execve so we
- * end up with proper pt_regs.
- */
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
-{
-	register char *__a __asm__ ("r6") = filename;
-	register void *__b __asm__ ("r7") = argv;
-	register void *__c __asm__ ("r8") = envp;
-	register unsigned long __syscall __asm__ ("r12") = __NR_execve;
-	register unsigned long __ret __asm__ ("r10");
-	__asm__ __volatile__ ("trap 0"
-			: "=r" (__ret), "=r" (__syscall)
-			: "1" (__syscall), "r" (__a), "r" (__b), "r" (__c)
-			: "r1", "r5", "r11", "r13", "r14",
-			  "r15", "r16", "r17", "r18", "r19");
-	return __ret;
-}
diff --git a/arch/v850/kernel/teg.c b/arch/v850/kernel/teg.c
deleted file mode 100644
index 699248f92aa..00000000000
--- a/arch/v850/kernel/teg.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/v850/kernel/teg.c -- NB85E-TEG cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Select timer interrupt instead of external pin.  */
-	TEG_ISS |= 0x1;
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0,		NUM_CPU_IRQS,	1, 7 },
-	{ "CMD", IRQ_INTCMD(0),	IRQ_INTCMD_NUM,	1, 5 },
-	{ "SER", IRQ_INTSER(0),	IRQ_INTSER_NUM,	1, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM,	1, 4 },
-	{ "ST",	 IRQ_INTST(0),	IRQ_INTST_NUM,	1, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init teg_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void teg_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* Enable UART I/O pins instead of external interrupt pins, and
-	   UART interrupts instead of external pin interrupts.  */
-	TEG_ISS |= 0x4E;
-}
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
deleted file mode 100644
index d810c93fe66..00000000000
--- a/arch/v850/kernel/time.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/arch/v850/kernel/time.c -- Arch-dependent timer functions
- *
- *  Copyright (C) 1991, 1992, 1995, 2001, 2002  Linus Torvalds
- *
- * This file contains the v850-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-
-#include "mach.h"
-
-#define TICK_SIZE	(tick_nsec / 1000)
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static irqreturn_t timer_interrupt (int irq, void *dummy, struct pt_regs *regs)
-{
-#if 0
-	/* last time the cmos clock got updated */
-	static long last_rtc_update=0;
-#endif
-
-	/* may need to kick the hardware timer */
-	if (mach_tick)
-	  mach_tick ();
-
-	do_timer (1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	profile_tick(CPU_PROFILING, regs);
-#if 0
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-	  if (set_rtc_mmss (xtime.tv_sec) == 0)
-	    last_rtc_update = xtime.tv_sec;
-	  else
-	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-#ifdef CONFIG_HEARTBEAT
-	/* use power LED as a heartbeat instead -- much more useful
-	   for debugging -- based on the version for PReP by Cort */
-	/* acts like an actual heart beat -- ie thump-thump-pause... */
-	if (mach_heartbeat) {
-	    static unsigned cnt = 0, period = 0, dist = 0;
-
-	    if (cnt == 0 || cnt == dist)
-		mach_heartbeat ( 1 );
-	    else if (cnt == 7 || cnt == dist+7)
-		mach_heartbeat ( 0 );
-
-	    if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	    }
-	}
-#endif /* CONFIG_HEARTBEAT */
-#endif /* 0 */
-
-	return IRQ_HANDLED;
-}
-
-static int timer_dev_id;
-static struct irqaction timer_irqaction = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "timer",
-	.dev_id = &timer_dev_id,
-};
-
-void time_init (void)
-{
-	mach_gettimeofday (&xtime);
-	mach_sched_init (&timer_irqaction);
-}
diff --git a/arch/v850/kernel/v850_ksyms.c b/arch/v850/kernel/v850_ksyms.c
deleted file mode 100644
index 8d386a5dbc4..00000000000
--- a/arch/v850/kernel/v850_ksyms.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <linux/module.h>
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-
-#include <asm/pgalloc.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/checksum.h>
-#include <asm/current.h>
-
-
-extern void *trap_table;
-EXPORT_SYMBOL (trap_table);
-
-/* platform dependent support */
-EXPORT_SYMBOL (kernel_thread);
-EXPORT_SYMBOL (__bug);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL (csum_partial_copy_nocheck);
-EXPORT_SYMBOL (csum_partial_copy_from_user);
-EXPORT_SYMBOL (ip_compute_csum);
-EXPORT_SYMBOL (ip_fast_csum);
-
-/* string / mem functions */
-EXPORT_SYMBOL (memset);
-EXPORT_SYMBOL (memcpy);
-EXPORT_SYMBOL (memmove);
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3 (void);
-extern void __ashrdi3 (void);
-extern void __lshrdi3 (void);
-extern void __muldi3 (void);
-extern void __negdi2 (void);
-
-EXPORT_SYMBOL (__ashldi3);
-EXPORT_SYMBOL (__ashrdi3);
-EXPORT_SYMBOL (__lshrdi3);
-EXPORT_SYMBOL (__muldi3);
-EXPORT_SYMBOL (__negdi2);
diff --git a/arch/v850/kernel/v850e2_cache.c b/arch/v850/kernel/v850e2_cache.c
deleted file mode 100644
index 4570312c689..00000000000
--- a/arch/v850/kernel/v850e2_cache.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * arch/v850/kernel/v850e2_cache.c -- Cache control for V850E2 cache
- * 	memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-
-#include <asm/v850e2_cache.h>
-
-/* Cache operations we can do.  The encoding corresponds directly to the
-   value we need to write into the COPR register.  */
-enum cache_op {
-	OP_SYNC_IF_DIRTY 	   = V850E2_CACHE_COPR_CFC(0), /* 000 */
-	OP_SYNC_IF_VALID 	   = V850E2_CACHE_COPR_CFC(1), /* 001 */
-	OP_SYNC_IF_VALID_AND_CLEAR = V850E2_CACHE_COPR_CFC(3), /* 011 */
-	OP_WAY_CLEAR 		   = V850E2_CACHE_COPR_CFC(4), /* 100 */
-	OP_FILL 		   = V850E2_CACHE_COPR_CFC(5), /* 101 */
-	OP_CLEAR 		   = V850E2_CACHE_COPR_CFC(6), /* 110 */
-	OP_CREATE_DIRTY 	   = V850E2_CACHE_COPR_CFC(7)  /* 111 */
-};
-
-/* Which cache to use.  This encoding also corresponds directly to the
-   value we need to write into the COPR register. */
-enum cache {
-	ICACHE = 0,
-	DCACHE = V850E2_CACHE_COPR_LBSL
-};
-
-/* Returns ADDR rounded down to the beginning of its cache-line.  */
-#define CACHE_LINE_ADDR(addr)  \
-   ((addr) & ~(V850E2_CACHE_LINE_SIZE - 1))
-/* Returns END_ADDR rounded up to the `limit' of its cache-line.  */
-#define CACHE_LINE_END_ADDR(end_addr)  \
-   CACHE_LINE_ADDR(end_addr + (V850E2_CACHE_LINE_SIZE - 1))
-
-
-/* Low-level cache ops.  */
-
-/* Apply cache-op OP to all entries in CACHE.  */
-static inline void cache_op_all (enum cache_op op, enum cache cache)
-{
-	int cmd = op | cache | V850E2_CACHE_COPR_WSLE | V850E2_CACHE_COPR_STRT;
-
-	if (op != OP_WAY_CLEAR) {
-		/* The WAY_CLEAR operation does the whole way, but other
-		   ops take begin-index and count params; we just indicate
-		   the entire cache.  */
-		V850E2_CACHE_CADL = 0;
-		V850E2_CACHE_CADH = 0;
-		V850E2_CACHE_CCNT = V850E2_CACHE_WAY_SIZE - 1;
-	}
-
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(0); /* way 0 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(1); /* way 1 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(2); /* way 2 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(3); /* way 3 */
-}
-
-/* Apply cache-op OP to all entries in CACHE covering addresses ADDR
-   through ADDR+LEN.  */
-static inline void cache_op_range (enum cache_op op, u32 addr, u32 len,
-				   enum cache cache)
-{
-	u32 start = CACHE_LINE_ADDR (addr);
-	u32 end = CACHE_LINE_END_ADDR (addr + len);
-	u32 num_lines = (end - start) >> V850E2_CACHE_LINE_SIZE_BITS;
-
-	V850E2_CACHE_CADL = start & 0xFFFF;
-	V850E2_CACHE_CADH = start >> 16;
-	V850E2_CACHE_CCNT = num_lines - 1;
-
-	V850E2_CACHE_COPR = op | cache | V850E2_CACHE_COPR_STRT;
-}
-
-
-/* High-level ops.  */
-
-static void cache_exec_after_store_all (void)
-{
-	cache_op_all (OP_SYNC_IF_DIRTY, DCACHE);
-	cache_op_all (OP_WAY_CLEAR, ICACHE);
-}
-
-static void cache_exec_after_store_range (u32 start, u32 len)
-{
-	cache_op_range (OP_SYNC_IF_DIRTY, start, len, DCACHE);
-	cache_op_range (OP_CLEAR, start, len, ICACHE);
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-	cache_exec_after_store_all ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-	cache_exec_after_store_range (start, end - start);
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-	cache_exec_after_store_range (page_to_virt (page), PAGE_SIZE);
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-			      unsigned long addr, int len)
-{
-	cache_exec_after_store_range (addr, len);
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-	/* For the exact size, see signal.c, but 16 bytes should be enough.  */
-	cache_exec_after_store_range (addr, 16);
-}
diff --git a/arch/v850/kernel/v850e_cache.c b/arch/v850/kernel/v850e_cache.c
deleted file mode 100644
index ea3e51cfb25..00000000000
--- a/arch/v850/kernel/v850e_cache.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * arch/v850/kernel/v850e_cache.c -- Cache control for V850E cache memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This file implements cache control for the rather simple cache used on
-   some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
-   CPU.  V850E2 processors have their own (better) cache
-   implementation.  */
-
-#include <asm/entry.h>
-#include <asm/cacheflush.h>
-#include <asm/v850e_cache.h>
-
-#define WAIT_UNTIL_CLEAR(value) while (value) {}
-
-/* Set caching params via the BHC and DCC registers.  */
-void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc)
-{
-	unsigned long *r0_ram = (unsigned long *)R0_RAM_ADDR;
-	register u16 bhc_val asm ("r6") = bhc;
-
-	/* Read the instruction cache control register (ICC) and confirm
-	   that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-	V850E_CACHE_ICC = icc;
-
-#ifdef V850E_CACHE_DCC
-	/* Configure data-cache.  */
-	V850E_CACHE_DCC = dcc;
-#endif /* V850E_CACHE_DCC */
-
-	/* Configure caching for various memory regions by writing the BHC
-	   register.  The documentation says that an instruction _cannot_
-	   enable/disable caching for the memory region in which the
-	   instruction itself exists; to work around this, we store
-	   appropriate instructions into the on-chip RAM area (which is never
-	   cached), and briefly jump there to do the work.  */
-#ifdef V850E_CACHE_WRITE_IBS
-	*r0_ram++ 	= 0xf0720760;	/* st.h r0, 0xfffff072[r0] */
-#endif
-	*r0_ram++ 	= 0xf06a3760;	/* st.h r6, 0xfffff06a[r0] */
-	*r0_ram 	= 0x5640006b;	/* jmp [r11] */
-
-	asm ("mov hilo(1f), r11; jmp [%1]; 1:;"
-	     :: "r" (bhc_val), "r" (R0_RAM_ADDR) : "r11");
-}
-
-static void clear_icache (void)
-{
-	/* 1. Read the instruction cache control register (ICC) and confirm
-	      that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-	/* 2. Read the ICC register and confirm that bit 12 (LOCK0) is
-  	      cleared.  Bit 13 of the ICC register is always cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x1000);
-
-	/* 3. Set the TCLR0 and TCLR1 bits of the ICC register as follows,
-	      when clearing way 0 and way 1 at the same time:
-	        (a) Set the TCLR0 and TCLR1 bits.
-		(b) Read the TCLR0 and TCLR1 bits to confirm that these bits
-		    are cleared.
-		(c) Perform (a) and (b) above again.  */
-	V850E_CACHE_ICC |= 0x3;
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-#ifdef V850E_CACHE_REPEAT_ICC_WRITE
-	/* Do it again.  */
-	V850E_CACHE_ICC |= 0x3;
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-#endif
-}
-
-#ifdef V850E_CACHE_DCC
-/* Flush or clear (or both) the data cache, depending on the value of FLAGS;
-   the procedure is the same for both, just the control bits used differ (and
-   both may be performed simultaneously).  */
-static void dcache_op (unsigned short flags)
-{
-	/* 1. Read the data cache control register (DCC) and confirm that bits
-	      0, 1, 4, and 5 (DC00, DC01, DC04, DC05) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & 0x33);
-
-	/* 2. Clear DCC register bit 12 (DC12), bit 13 (DC13), or both
-	      depending on the way for which tags are to be cleared.  */
-	V850E_CACHE_DCC &= ~0xC000;
-
-	/* 3. Set DCC register bit 0 (DC00), bit 1 (DC01) or both depending on
-	      the way for which tags are to be cleared.
-	      ...
-	      Set DCC register bit 4 (DC04), bit 5 (DC05), or both depending
-	      on the way to be data flushed.  */
-	V850E_CACHE_DCC |= flags;
-
-	/* 4. Read DCC register bit DC00, DC01 [DC04, DC05], or both depending
-	      on the way for which tags were cleared [flushed] and confirm
-	      that that bit is cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & flags);
-}
-#endif /* V850E_CACHE_DCC */
-
-/* Flushes the contents of the dcache to memory.  */
-static inline void flush_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if in write-back mode.  */
-	if (V850E_CACHE_DCC & 0x0400)
-		dcache_op (0x30);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Flushes the contents of the dcache to memory, and then clears it.  */
-static inline void clear_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if the dcache is enabled.  */
-	if (V850E_CACHE_DCC & 0x0C00)
-		dcache_op (0x33);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Clears the dcache without flushing to memory first.  */
-static inline void clear_dcache_no_flush (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if the dcache is enabled.  */
-	if (V850E_CACHE_DCC & 0x0C00)
-		dcache_op (0x3);
-#endif /* V850E_CACHE_DCC */
-}
-
-static inline void cache_exec_after_store (void)
-{
-	flush_dcache ();
-	clear_icache ();
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-			      unsigned long adr, int len)
-{
-	cache_exec_after_store ();
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-	cache_exec_after_store ();
-}
diff --git a/arch/v850/kernel/v850e_intc.c b/arch/v850/kernel/v850e_intc.c
deleted file mode 100644
index 8d39a52ee6d..00000000000
--- a/arch/v850/kernel/v850e_intc.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/v850/kernel/v850e_intc.c -- V850E interrupt controller (INTC)
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/v850e_intc.h>
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned v850e_intc_irq_startup (unsigned irq)
-{
-	v850e_intc_clear_pending_irq (irq);
-	v850e_intc_enable_irq (irq);
-	return 0;
-}
-
-static void v850e_intc_end_irq (unsigned irq)
-{
-	unsigned long psw, temp;
-
-	/* Clear the highest-level bit in the In-service priority register
-	   (ISPR), to allow this interrupt (or another of the same or
-	   lesser priority) to happen again.
-
-	   The `reti' instruction normally does this automatically when the
-	   PSW bits EP and NP are zero, but we can't always rely on reti
-	   being used consistently to return after an interrupt (another
-	   process can be scheduled, for instance, which can delay the
-	   associated reti for a long time, or this process may be being
-	   single-stepped, which uses the `dbret' instruction to return
-	   from the kernel).
-
-	   We also set the PSW EP bit, which prevents reti from also
-	   trying to modify the ISPR itself.  */
-
-	/* Get PSW and disable interrupts.  */
-	asm volatile ("stsr psw, %0; di" : "=r" (psw));
-	/* We don't want to do anything for NMIs (they don't use the ISPR).  */
-	if (! (psw & 0xC0)) {
-		/* Transition to `trap' state, so that an eventual real
-		   reti instruction won't modify the ISPR.  */
-		psw |= 0x40;
-		/* Fake an interrupt return, which automatically clears the
-		   appropriate bit in the ISPR.  */
-		asm volatile ("mov hilo(1f), %0;"
-			      "ldsr %0, eipc; ldsr %1, eipsw;"
-			      "reti;"
-			      "1:"
-			      : "=&r" (temp) : "r" (psw));
-	}
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
-				       struct hw_interrupt_type *hw_irq_types)
-{
-	struct v850e_intc_irq_init *init;
-	for (init = inits; init->name; init++) {
-		unsigned i;
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = v850e_intc_irq_startup;
-		hwit->shutdown = v850e_intc_disable_irq;
-		hwit->enable   = v850e_intc_enable_irq;
-		hwit->disable  = v850e_intc_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = v850e_intc_end_irq;
-		
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-		/* Set the interrupt priorities.  */
-		for (i = 0; i < init->num; i++) {
-			unsigned irq = init->base + i * init->interval;
-
-			/* If the interrupt is currently enabled (all
-			   interrupts are initially disabled), then
-			   assume whoever enabled it has set things up
-			   properly, and avoid messing with it.  */
-			if (! v850e_intc_irq_enabled (irq))
-				/* This write also (1) disables the
-				   interrupt, and (2) clears any pending
-				   interrupts.  */
-				V850E_INTC_IC (irq)
-					= (V850E_INTC_IC_PR (init->priority)
-					   | V850E_INTC_IC_MK);
-		}
-	}
-}
diff --git a/arch/v850/kernel/v850e_timer_d.c b/arch/v850/kernel/v850e_timer_d.c
deleted file mode 100644
index d2a4ece2574..00000000000
--- a/arch/v850/kernel/v850e_timer_d.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_d.c -- `Timer D' component often used
- *	with V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-
-#include <asm/v850e_utils.h>
-#include <asm/v850e_timer_d.h>
-
-/* Start interval timer TIMER (0-3).  The timer will issue the
-   corresponding INTCMD interrupt RATE times per second.
-   This function does not enable the interrupt.  */
-void v850e_timer_d_configure (unsigned timer, unsigned rate)
-{
-	unsigned divlog2, count;
-
-	/* Calculate params for timer.  */
-	if (! calc_counter_params (
-		    V850E_TIMER_D_BASE_FREQ, rate,
-		    V850E_TIMER_D_TMCD_CS_MIN, V850E_TIMER_D_TMCD_CS_MAX, 16,
-		    &divlog2, &count))
-		printk (KERN_WARNING
-			"Cannot find interval timer %d setting suitable"
-			" for rate of %dHz.\n"
-			"Using rate of %dHz instead.\n",
-			timer, rate,
-			(V850E_TIMER_D_BASE_FREQ >> divlog2) >> 16);
-
-	/* Do the actual hardware timer initialization:  */
-
-	/* Enable timer.  */
-	V850E_TIMER_D_TMCD(timer) = V850E_TIMER_D_TMCD_CAE;
-	/* Set clock divider.  */
-	V850E_TIMER_D_TMCD(timer)
-		= V850E_TIMER_D_TMCD_CAE
-		| V850E_TIMER_D_TMCD_CS(divlog2);
-	/* Set timer compare register.  */
-	V850E_TIMER_D_CMD(timer) = count;
-	/* Start counting.  */
-	V850E_TIMER_D_TMCD(timer)
-		= V850E_TIMER_D_TMCD_CAE
-		| V850E_TIMER_D_TMCD_CS(divlog2)
-		| V850E_TIMER_D_TMCD_CE;
-}
diff --git a/arch/v850/kernel/v850e_utils.c b/arch/v850/kernel/v850e_utils.c
deleted file mode 100644
index e6807ef8dee..00000000000
--- a/arch/v850/kernel/v850e_utils.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/v850e_utils.h -- Utility functions associated with
- *	V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/v850e_utils.h>
-
-/* Calculate counter clock-divider and count values to attain the
-   desired frequency RATE from the base frequency BASE_FREQ.  The
-   counter is expected to have a clock-divider, which can divide the
-   system cpu clock by a power of two value from MIN_DIVLOG2 to
-   MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
-   counts up and resets whenever it's equal to the compare register,
-   generating an interrupt or whatever when it does so).  The returned
-   values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
-   -- the counter compare value to use.  Returns true if it was possible
-   to find a reasonable value, otherwise false (and the other return
-   values will be set to be as good as possible).  */
-int calc_counter_params (unsigned long base_freq,
-			 unsigned long rate,
-			 unsigned min_divlog2, unsigned max_divlog2,
-			 unsigned counter_size,
-			 unsigned *divlog2, unsigned *count)
-{
-	unsigned _divlog2;
-	int ok = 0;
-
-	/* Find the lowest clock divider setting that can represent RATE.  */
-	for (_divlog2 = min_divlog2; _divlog2 <= max_divlog2; _divlog2++) {
-		/* Minimum interrupt rate possible using this divider.  */
-		unsigned min_int_rate
-			= (base_freq >> _divlog2) >> counter_size;
-
-		if (min_int_rate <= rate) {
-			/* This setting is the highest resolution
-			   setting that's slow enough enough to attain
-			   RATE interrupts per second, so use it.  */
-			ok = 1;
-			break;
-		}
-	}
-
-	if (_divlog2 > max_divlog2)
-		/* Can't find correct setting.  */
-		_divlog2 = max_divlog2;
-
-	if (divlog2)
-		*divlog2 = _divlog2;
-	if (count)
-		*count = ((base_freq >> _divlog2) + rate/2) / rate;
-
-	return ok;
-}
diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S
deleted file mode 100644
index d08cd1d27f2..00000000000
--- a/arch/v850/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * arch/v850/vmlinux.lds.S -- kernel linker script for v850 platforms
- *
- *  Copyright (C) 2002,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-
-#define VMLINUX_SYMBOL(_sym_) _##_sym_
-#include <asm-generic/vmlinux.lds.h>
-
-/* For most platforms, this will define useful things like RAM addr/size.  */
-#include <asm/machdep.h>
-
-
-/* The following macros contain the usual definitions for various data areas.
-   The prefix `RAMK_' is used to indicate macros suitable for kernels loaded
-   into RAM, and similarly `ROMK_' for ROM-resident kernels.  Note that all
-   symbols are prefixed with an extra `_' for compatibility with the v850
-   toolchain.  */
-
-	
-/* Interrupt vectors.  */
-#define INTV_CONTENTS							      \
-		. = ALIGN (0x10) ;					      \
-		__intv_start = . ;					      \
-			*(.intv.reset)	/* Reset vector */		      \
-		. = __intv_start + 0x10 ;				      \
-			*(.intv.common)	/* Vectors common to all v850e proc */\
-		. = __intv_start + 0x80 ;				      \
-			*(.intv.mach)	/* Machine-specific int. vectors.  */ \
-		__intv_end = . ;
-
-#define RODATA_CONTENTS							      \
-		. = ALIGN (16) ;					      \
-			*(.rodata) *(.rodata.*)				      \
-			*(__vermagic)		/* Kernel version magic */    \
-			*(.rodata1)					      \
-		/* PCI quirks */					      \
-		___start_pci_fixups_early = . ;				      \
-			*(.pci_fixup_early)				      \
-		___end_pci_fixups_early = . ;				      \
-		___start_pci_fixups_header = . ;			      \
-			*(.pci_fixup_header)				      \
-		___end_pci_fixups_header = . ;				      \
-		___start_pci_fixups_final = . ;				      \
-			*(.pci_fixup_final)				      \
-		___end_pci_fixups_final = . ;				      \
-		___start_pci_fixups_enable = . ;			      \
-			*(.pci_fixup_enable)				      \
-		___end_pci_fixups_enable = . ;				      \
-		/* Kernel symbol table: Normal symbols */		      \
-		___start___ksymtab = .;					      \
-			*(__ksymtab)					      \
-		___stop___ksymtab = .;					      \
-		/* Kernel symbol table: GPL-only symbols */		      \
-		___start___ksymtab_gpl = .;				      \
-			*(__ksymtab_gpl)				      \
-		___stop___ksymtab_gpl = .;				      \
-		/* Kernel symbol table: GPL-future symbols */		      \
-		___start___ksymtab_gpl_future = .;			      \
-			*(__ksymtab_gpl_future)				      \
-		___stop___ksymtab_gpl_future = .;			      \
-		/* Kernel symbol table: strings */			      \
-			*(__ksymtab_strings)				      \
-		/* Kernel symbol table: Normal symbols */		      \
-		___start___kcrctab = .;					      \
-			*(__kcrctab)					      \
-		___stop___kcrctab = .;					      \
-		/* Kernel symbol table: GPL-only symbols */		      \
-		___start___kcrctab_gpl = .;				      \
-			*(__kcrctab_gpl)				      \
-		___stop___kcrctab_gpl = .;				      \
-		/* Kernel symbol table: GPL-future symbols */		      \
-		___start___kcrctab_gpl_future = .;			      \
-			*(__kcrctab_gpl_future)				      \
-		___stop___kcrctab_gpl_future = .;			      \
-		/* Built-in module parameters */			      \
-		. = ALIGN (4) ;						      \
-		___start___param = .;					      \
-		*(__param)						      \
-		___stop___param = .;
-
-
-/* Kernel text segment, and some constant data areas.  */
-#define TEXT_CONTENTS							      \
-		_text = .;						      \
-		__stext = . ;						      \
-		TEXT_TEXT						      \
-		SCHED_TEXT						      \
-			*(.exit.text)	/* 2.5 convention */		      \
-			*(.text.exit)	/* 2.4 convention */		      \
-			*(.text.lock)					      \
-			*(.exitcall.exit)				      \
-		__real_etext = . ;	/* There may be data after here.  */  \
-		RODATA_CONTENTS						      \
-		. = ALIGN (4) ;						      \
-		    	*(.call_table_data)				      \
-			*(.call_table_text)				      \
-		. = ALIGN (16) ;	/* Exception table.  */		      \
-		___start___ex_table = . ;				      \
-			*(__ex_table)					      \
-		___stop___ex_table = . ;				      \
-		. = ALIGN (4) ;						      \
-		__etext = . ;
-
-/* Kernel data segment.  */
-#define DATA_CONTENTS							      \
-		__sdata = . ;						      \
-		DATA_DATA						      \
-			EXIT_DATA	/* 2.5 convention */		      \
-			*(.data.exit)	/* 2.4 convention */		      \
-		. = ALIGN (16) ;					      \
-		*(.data.cacheline_aligned)				      \
-		. = ALIGN (0x2000) ;					      \
-        	*(.data.init_task)					      \
-		. = ALIGN (0x2000) ;					      \
-		__edata = . ;
-
-/* Kernel BSS segment.  */
-#define BSS_CONTENTS							      \
-		__sbss = . ;						      \
-			*(.bss)						      \
-			*(COMMON)					      \
-		. = ALIGN (4) ;						      \
-		__init_stack_end = . ;					      \
-		__ebss = . ;
-
-/* `initcall' tables.  */
-#define INITCALL_CONTENTS						      \
-		. = ALIGN (16) ;					      \
-		___setup_start = . ;					      \
-			*(.init.setup)	/* 2.5 convention */		      \
-			*(.setup.init)	/* 2.4 convention */		      \
-		___setup_end = . ;					      \
-		___initcall_start = . ;					      \
-			*(.initcall.init)				      \
-			INITCALLS					      \
-		. = ALIGN (4) ;						      \
-		___initcall_end = . ;					      \
-		___con_initcall_start = .;				      \
-			*(.con_initcall.init)				      \
-		___con_initcall_end = .;
-
-/* Contents of `init' section for a kernel that's loaded into RAM.  */
-#define RAMK_INIT_CONTENTS						      \
-		RAMK_INIT_CONTENTS_NO_END				      \
-		__init_end = . ;
-/* Same as RAMK_INIT_CONTENTS, but doesn't define the `__init_end' symbol.  */
-#define RAMK_INIT_CONTENTS_NO_END					      \
-		. = ALIGN (4096) ;					      \
-		__init_start = . ;					      \
-			__sinittext = .;				      \
-			INIT_TEXT	/* 2.5 convention */		      \
-			__einittext = .;				      \
-			INIT_DATA					      \
-			*(.text.init)	/* 2.4 convention */		      \
-			*(.data.init)					      \
-		INITCALL_CONTENTS					      \
-		INITRAMFS_CONTENTS
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into RAM.  */	
-#define ROMK_INIT_RAM_CONTENTS						      \
-		. = ALIGN (4096) ;					      \
-		__init_start = . ;					      \
-			INIT_DATA	/* 2.5 convention */		      \
-			*(.data.init)	/* 2.4 convention */		      \
-		__init_end = . ;					      \
-		. = ALIGN (4096) ;
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into ROM.  */	
-#define ROMK_INIT_ROM_CONTENTS						      \
-			_sinittext = .;					      \
-			INIT_TEXT	/* 2.5 convention */		      \
-			_einittext = .;					      \
-			*(.text.init)	/* 2.4 convention */		      \
-		INITCALL_CONTENTS					      \
-		INITRAMFS_CONTENTS
-
-/* A root filesystem image, for kernels with an embedded root filesystem.  */
-#define ROOT_FS_CONTENTS						      \
-		__root_fs_image_start = . ;				      \
-		*(.root)						      \
-		__root_fs_image_end = . ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-/* The initramfs archive.  */
-#define INITRAMFS_CONTENTS						      \
-		. = ALIGN (4) ;						      \
-		___initramfs_start = . ;				      \
-			*(.init.ramfs)					      \
-		___initramfs_end = . ;
-#endif
-
-/* Where the initial bootmap (bitmap for the boot-time memory allocator) 
-   should be place.  */
-#define BOOTMAP_CONTENTS						      \
-		. = ALIGN (4096) ;					      \
-		__bootmap = . ;						      \
-		. = . + 4096 ;		/* enough for 128MB.   */
-
-/* The contents of a `typical' kram area for a kernel in RAM.  */
-#define RAMK_KRAM_CONTENTS						      \
-		__kram_start = . ;					      \
-		TEXT_CONTENTS						      \
-		DATA_CONTENTS						      \
-		BSS_CONTENTS						      \
-		RAMK_INIT_CONTENTS					      \
-		__kram_end = . ;					      \
-		BOOTMAP_CONTENTS
-
-
-/* Define output sections normally used for a ROM-resident kernel.  
-   ROM and RAM should be appropriate memory areas to use for kernel
-   ROM and RAM data.  This assumes that ROM starts at 0 (and thus can
-   hold the interrupt vectors).  */
-#define ROMK_SECTIONS(ROM, RAM)						      \
-	.rom : {							      \
-		INTV_CONTENTS						      \
-		TEXT_CONTENTS						      \
-		ROMK_INIT_ROM_CONTENTS					      \
-		ROOT_FS_CONTENTS					      \
-	} > ROM								      \
-									      \
-	__rom_copy_src_start = . ;					      \
-									      \
-	.data : {							      \
-		__kram_start = . ;					      \
-		__rom_copy_dst_start = . ;				      \
-		DATA_CONTENTS						      \
-		ROMK_INIT_RAM_CONTENTS					      \
-		__rom_copy_dst_end = . ;				      \
-	} > RAM  AT> ROM						      \
-									      \
-	.bss ALIGN (4) : {						      \
-		BSS_CONTENTS						      \
-		__kram_end = . ;					      \
-		BOOTMAP_CONTENTS					      \
-	} > RAM
-
-
-/* The 32-bit variable `jiffies' is just the lower 32-bits of `jiffies_64'.  */
-_jiffies = _jiffies_64 ;
-
-
-/* Include an appropriate platform-dependent linker-script (which
-   usually should use the above macros to do most of the work).  */
-
-#ifdef CONFIG_V850E_SIM
-# include "sim.ld"
-#endif
-
-#ifdef CONFIG_V850E2_SIM85E2
-# include "sim85e2.ld"
-#endif
-
-#ifdef CONFIG_V850E2_FPGA85E2C
-# include "fpga85e2c.ld"
-#endif
-
-#ifdef CONFIG_V850E2_ANNA
-# ifdef CONFIG_ROM_KERNEL
-#  include "anna-rom.ld"
-# else
-#  include "anna.ld"
-# endif
-#endif
-
-#ifdef CONFIG_V850E_AS85EP1
-# ifdef CONFIG_ROM_KERNEL
-#  include "as85ep1-rom.ld"
-# else
-#  include "as85ep1.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_MA1
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_ma1_cb-rom.ld"
-# else
-#  include "rte_ma1_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_NB85E
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_nb85e_cb-rom.ld"
-# elif defined(CONFIG_RTE_CB_MULTI)
-#  include "rte_nb85e_cb-multi.ld"
-# else
-#  include "rte_nb85e_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_ME2
-#  include "rte_me2_cb.ld"
-#endif
-
diff --git a/arch/v850/lib/Makefile b/arch/v850/lib/Makefile
deleted file mode 100644
index 1c78b728a11..00000000000
--- a/arch/v850/lib/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# arch/v850/lib/Makefile
-#
-
-lib-y  = ashrdi3.o ashldi3.o lshrdi3.o muldi3.o negdi2.o \
-	 checksum.o memcpy.o memset.o
diff --git a/arch/v850/lib/ashldi3.c b/arch/v850/lib/ashldi3.c
deleted file mode 100644
index 9e792d53f0e..00000000000
--- a/arch/v850/lib/ashldi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* ashldi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashldi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.low = 0;
-      w.s.high = (USItype)uu.s.low << -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.low >> bm;
-      w.s.low = (USItype)uu.s.low << b;
-      w.s.high = ((USItype)uu.s.high << b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/ashrdi3.c b/arch/v850/lib/ashrdi3.c
deleted file mode 100644
index 78efb65e315..00000000000
--- a/arch/v850/lib/ashrdi3.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      /* w.s.high = 1..1 or 0..0 */
-      w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-      w.s.low = uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/checksum.c b/arch/v850/lib/checksum.c
deleted file mode 100644
index 042158dfe17..00000000000
--- a/arch/v850/lib/checksum.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		MIPS specific IP/TCP/UDP checksumming routines
- *
- * Authors:	Ralf Baechle, <ralf@waldorf-gmbh.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.1 2002/09/28 14:58:40 gerg Exp $
- */
-#include <net/checksum.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-static inline unsigned short from32to16 (unsigned long sum)
-{
-	unsigned int result;
-	/*
-			        %0		%1
-	      hsw %1, %0	H     L		L     H
-	      add %1, %0	H     L		H+L+C H+L
-	*/
-	asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
-	return result >> 16;
-}
-
-static inline unsigned int do_csum(const unsigned char * buff, int len)
-{
-	int odd, count;
-	unsigned int result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = be16_to_cpu(*buff);
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-			unsigned int carry = 0;
-			do {
-				unsigned int w = *(unsigned int *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += le16_to_cpu(*buff);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += (__force u32)sum;
-	if ((__force u32)sum > result)
-		result += 1;
-	return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * copy while checksumming, otherwise like csum_partial
- */
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-                               int len, __wsum sum)
-{
-	/*
-	 * It's 2:30 am and I don't feel like doing it real ...
-	 * This is lots slower than the real thing (tm)
-	 */
-	sum = csum_partial(src, len, sum);
-	memcpy(dst, src, len);
-
-	return sum;
-}
-
-/*
- * Copy from userspace and compute checksum.  If we catch an exception
- * then zero the rest of the buffer.
- */
-__wsum csum_partial_copy_from_user (const void *src,
-					  void *dst,
-                                          int len, __wsum sum,
-                                          int *err_ptr)
-{
-	int missing;
-
-	missing = copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*err_ptr = -EFAULT;
-	}
-		
-	return csum_partial(dst, len, sum);
-}
diff --git a/arch/v850/lib/lshrdi3.c b/arch/v850/lib/lshrdi3.c
deleted file mode 100644
index 93b1cb6fdee..00000000000
--- a/arch/v850/lib/lshrdi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__lshrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.high = 0;
-      w.s.low = (USItype)uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = (USItype)uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/memcpy.c b/arch/v850/lib/memcpy.c
deleted file mode 100644
index 492847b3e61..00000000000
--- a/arch/v850/lib/memcpy.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/v850/lib/memcpy.c -- Memory copying
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <asm/string.h>
-
-#define CHUNK_SIZE		32 /* bytes */
-#define CHUNK_ALIGNED(addr)	(((unsigned long)addr & 0x3) == 0)
-
-/* Note that this macro uses 8 call-clobbered registers (not including
-   R1), which are few enough so that the following functions don't need
-   to spill anything to memory.  It also uses R1, which is nominally
-   reserved for the assembler, but here it should be OK.  */
-#define COPY_CHUNK(src, dst)			\
-   asm ("mov %0, ep;"				\
-	"sld.w 0[ep], r1; sld.w 4[ep], r12;"	\
-	"sld.w 8[ep], r13; sld.w 12[ep], r14;"	\
-	"sld.w 16[ep], r15; sld.w 20[ep], r17;"	\
-	"sld.w 24[ep], r18; sld.w 28[ep], r19;"	\
-	"mov %1, ep;"				\
-	"sst.w r1, 0[ep]; sst.w r12, 4[ep];"	\
-	"sst.w r13, 8[ep]; sst.w r14, 12[ep];"	\
-	"sst.w r15, 16[ep]; sst.w r17, 20[ep];"	\
-	"sst.w r18, 24[ep]; sst.w r19, 28[ep]"	\
-	:: "r" (src), "r" (dst)			\
-	: "r1", "r12", "r13", "r14", "r15",	\
-	  "r17", "r18", "r19", "ep", "memory");
-
-void *memcpy (void *dst, const void *src, __kernel_size_t size)
-{
-	char *_dst = dst;
-	const char *_src = src;
-
-	if (size >= CHUNK_SIZE && CHUNK_ALIGNED(_src) && CHUNK_ALIGNED(_dst)) {
-		/* Copy large blocks efficiently.  */
-		unsigned count;
-		for (count = size / CHUNK_SIZE; count; count--) {
-			COPY_CHUNK (_src, _dst);
-			_src += CHUNK_SIZE;
-			_dst += CHUNK_SIZE;
-		}
-		size %= CHUNK_SIZE;
-	}
-
-	if (size > 0)
-		do
-			*_dst++ = *_src++;
-		while (--size);
-
-	return dst;
-}
-
-void *memmove (void *dst, const void *src, __kernel_size_t size)
-{
-	if ((unsigned long)dst < (unsigned long)src
-	    || (unsigned long)src + size < (unsigned long)dst)
-		return memcpy (dst, src, size);
-	else {
-		char *_dst = dst + size;
-		const char *_src = src + size;
-
-		if (size >= CHUNK_SIZE
-		    && CHUNK_ALIGNED (_src) && CHUNK_ALIGNED (_dst))
-		{
-			/* Copy large blocks efficiently.  */
-			unsigned count;
-			for (count = size / CHUNK_SIZE; count; count--) {
-				_src -= CHUNK_SIZE;
-				_dst -= CHUNK_SIZE;
-				COPY_CHUNK (_src, _dst);
-			}
-			size %= CHUNK_SIZE;
-		}
-
-		if (size > 0)
-			do
-				*--_dst = *--_src;
-			while (--size);
-
-		return _dst;
-	}
-}
diff --git a/arch/v850/lib/memset.c b/arch/v850/lib/memset.c
deleted file mode 100644
index d1b2ad821b1..00000000000
--- a/arch/v850/lib/memset.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/v850/lib/memset.c -- Memory initialization
- *
- *  Copyright (C) 2001,02,04  NEC Corporation
- *  Copyright (C) 2001,02,04  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-
-void *memset (void *dst, int val, __kernel_size_t count)
-{
-	if (count) {
-		register unsigned loop;
-		register void *ptr asm ("ep") = dst;
-
-		/* replicate VAL into a long.  */
-		val &= 0xff;
-		val |= val << 8;
-		val |= val << 16;
-
-		/* copy initial unaligned bytes.  */
-		if ((long)ptr & 1) {
-			*(char *)ptr = val;
-			ptr = (void *)((char *)ptr + 1);
-			count--;
-		}
-		if (count > 2 && ((long)ptr & 2)) {
-			*(short *)ptr = val;
-			ptr = (void *)((short *)ptr + 1);
-			count -= 2;
-		}
-
-		/* 32-byte copying loop.  */
-		for (loop = count / 32; loop; loop--) {
-			asm ("sst.w %0, 0[ep]; sst.w %0, 4[ep];"
-			     "sst.w %0, 8[ep]; sst.w %0, 12[ep];"
-			     "sst.w %0, 16[ep]; sst.w %0, 20[ep];"
-			     "sst.w %0, 24[ep]; sst.w %0, 28[ep]"
-			     :: "r" (val) : "memory");
-			ptr += 32;
-		}
-		count %= 32;
-
-		/* long copying loop.  */
-		for (loop = count / 4; loop; loop--) {
-			*(long *)ptr = val;
-			ptr = (void *)((long *)ptr + 1);
-		}
-		count %= 4;
-
-		/* finish up with any trailing bytes.  */
-		if (count & 2) {
-			*(short *)ptr = val;
-			ptr = (void *)((short *)ptr + 1);
-		}
-		if (count & 1) {
-			*(char *)ptr = val;
-		}
-	}
-
-	return dst;
-}
diff --git a/arch/v850/lib/muldi3.c b/arch/v850/lib/muldi3.c
deleted file mode 100644
index 277ca25c82c..00000000000
--- a/arch/v850/lib/muldi3.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and 
-			   gcc-2.7.2.3/longlong.h which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 2001 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define umul_ppmm(w1, w0, u, v) \
-  __asm__ ("mulu %3, %0, %1"						\
-           : "=r" ((USItype)(w0)),					\
-             "=r" ((USItype)(w1))					\
-           : "%0" ((USItype)(u)),					\
-             "r" ((USItype)(v)))
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;							\
-    umul_ppmm (__w.s.high, __w.s.low, u, v);				\
-    __w.ll; })
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__muldi3 (DItype u, DItype v)
-{
-  DIunion w;
-  DIunion uu, vv;
-
-  uu.ll = u,
-  vv.ll = v;
-
-  w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-  w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-	       + (USItype) uu.s.high * (USItype) vv.s.low);
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/negdi2.c b/arch/v850/lib/negdi2.c
deleted file mode 100644
index 571e04fc619..00000000000
--- a/arch/v850/lib/negdi2.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/v850/lib/negdi2.c -- 64-bit negation
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-typedef		 int DItype	__attribute__ ((mode (DI)));
-
-DItype __negdi2 (DItype x)
-{
-	__asm__ __volatile__
-		("not	r6, r10;"
-		 "add	1, r10;"
-		 "setf	c, r6;"
-		 "not	r7, r11;"
-		 "add	r6, r11"
-		 ::: "r6", "r7", "r10", "r11");
-}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 8fc7451c004..3b4a14e355c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -942,22 +942,6 @@ config SERIAL_IP22_ZILOG_CONSOLE
 	depends on SERIAL_IP22_ZILOG=y
 	select SERIAL_CORE_CONSOLE
 
-config V850E_UART
-	bool "NEC V850E on-chip UART support"
-	depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1
-	select SERIAL_CORE
-	default y
-
-config V850E_UARTB
-        bool
-	depends on V850E_UART && V850E_ME2
-	default y
-
-config V850E_UART_CONSOLE
-	bool "Use NEC V850E on-chip UART for console"
-	depends on V850E_UART
-	select SERIAL_CORE_CONSOLE
-
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
 	depends on SUPERH || H8300
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ccb78f66c2b..48399e134c0 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -788,8 +788,6 @@ config WATCHDOG_RIO
 	  machines.  The watchdog timeout period is normally one minute but
 	  can be changed with a boot-time parameter.
 
-# V850 Architecture
-
 # XTENSA Architecture
 
 #
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 25b352b664d..edd305a64e6 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -119,8 +119,6 @@ obj-$(CONFIG_SH_WDT) += shwdt.o
 
 # SPARC64 Architecture
 
-# V850 Architecture
-
 # XTENSA Architecture
 
 # Architecture Independant
diff --git a/include/asm-v850/Kbuild b/include/asm-v850/Kbuild
deleted file mode 100644
index c68e1680da0..00000000000
--- a/include/asm-v850/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-include include/asm-generic/Kbuild.asm
diff --git a/include/asm-v850/a.out.h b/include/asm-v850/a.out.h
deleted file mode 100644
index e9439a0708f..00000000000
--- a/include/asm-v850/a.out.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __V850_A_OUT_H__
-#define __V850_A_OUT_H__
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-
-#endif /* __V850_A_OUT_H__ */
diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h
deleted file mode 100644
index cd5eaee103b..00000000000
--- a/include/asm-v850/anna.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ANNA_H__
-#define __V850_ANNA_H__
-
-#include <asm/v850e2.h>		/* Based on V850E2 core.  */
-
-
-#define CPU_MODEL	"v850e2/anna"
-#define CPU_MODEL_LONG	"NEC V850E2/Anna"
-#define PLATFORM	"anna"
-#define PLATFORM_LONG	"NEC/Midas lab V850E2/Anna evaluation board"
-
-#define CPU_CLOCK_FREQ	200000000 /*  200MHz */
-#define SYS_CLOCK_FREQ	 33300000 /* 33.3MHz */
-
-
-/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-#define SRAM_ADDR	0x04000000
-#define SRAM_SIZE	0x00100000 /* 1MB */
-/* 64MB of DRAM.  */
-#define SDRAM_ADDR	0x08000000	
-#define SDRAM_SIZE	0x04000000 /* 64MB */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 	SRAM_ADDR
-
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  The Anna chip has
-   128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored
-   every 128K, so we can use the `last mirror' (except for the portion at
-   the top which is overridden by I/O space).  In addition, the early
-   sample chip we're using has lots of memory errors in the dLB ram, so we
-   use a specially chosen location that has at least 20 bytes of contiguous
-   valid memory (xxxF0020 - xxxF003F).  */
-#define R0_RAM_ADDR			0xFFFF8020
-
-
-/* Anna specific control registers.  */
-#define ANNA_ILBEN_ADDR			0xFFFFF7F2
-#define ANNA_ILBEN			(*(volatile u16 *)ANNA_ILBEN_ADDR)
-
-
-/* I/O port P0-P3. */
-/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
-#define ANNA_PORT_IO_ADDR(n)		(0xFFFFF400 + (n) * 2)
-#define ANNA_PORT_IO(n)			(*(volatile u8 *)ANNA_PORT_IO_ADDR(n))
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ANNA_PORT_PM_ADDR(n)		(0xFFFFF410 + (n) * 2)
-#define ANNA_PORT_PM(n)			(*(volatile u8 *)ANNA_PORT_PM_ADDR(n))
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
-#define IRQ_INTP(n)	(n)	/* Pnnn (pin) interrupts 0-15 */
-#define IRQ_INTP_NUM	16
-#define IRQ_INTOV(n)	(0x10 + (n)) /* 0-2 */
-#define IRQ_INTOV_NUM	2
-#define IRQ_INTCCC(n)	(0x12 + (n))
-#define IRQ_INTCCC_NUM	4
-#define IRQ_INTCMD(n)	(0x16 + (n)) /* interval timer interrupts 0-5 */
-#define IRQ_INTCMD_NUM	6
-#define IRQ_INTDMA(n)	(0x1C + (n)) /* DMA interrupts 0-3 */
-#define IRQ_INTDMA_NUM	4
-#define IRQ_INTDMXER	0x20
-#define IRQ_INTSRE(n)	(0x21 + (n)*3) /* UART 0-1 reception error */
-#define IRQ_INTSRE_NUM	2
-#define IRQ_INTSR(n)	(0x22 + (n)*3) /* UART 0-1 reception completion */
-#define IRQ_INTSR_NUM	2
-#define IRQ_INTST(n)	(0x23 + (n)*3) /* UART 0-1 transmission completion */
-#define IRQ_INTST_NUM	2
-
-#define NUM_CPU_IRQS	64
-
-#ifndef __ASSEMBLY__
-/* Initialize chip interrupts.  */
-extern void anna_init_irqs (void);
-#endif
-
-
-/* Anna UART details (basically the same as the V850E/MA1, but 2 channels).  */
-#define V850E_UART_NUM_CHANNELS		2
-#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 2)
-#define V850E_UART_CHIP_NAME 		"V850E2/NA85E2A"
-
-/* This is the UART channel that's actually connected on the board.  */
-#define V850E_UART_CONSOLE_CHANNEL	1
-
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	anna_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void anna_uart_pre_configure (unsigned chan,
-				     unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
-
-/* CTS for UART channel 1 is pin P37 (bit 7 of port 3).  */
-#define V850E_UART_CTS(chan)	((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1)
-/* RTS for UART channel 1 is pin P07 (bit 7 of port 0).  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   if (chan == 1) {						      \
-		   unsigned old = ANNA_PORT_IO(0); 			      \
-		   if (val)						      \
-			   ANNA_PORT_IO(0) = old & ~0x80;		      \
-		   else							      \
-			   ANNA_PORT_IO(0) = old | 0x80;		      \
-	   }								      \
-   } while (0)
-
-
-/* Timer C details.  */
-#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
-
-/* Timer D details (the Anna actually has 5 of these; should change later). */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
-#define V850E_TIMER_D_TMCD_CS_MIN	1 /* min 2^1 divider */
-
-
-#endif /* __V850_ANNA_H__ */
diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h
deleted file mode 100644
index 5a5ca9073d0..00000000000
--- a/include/asm-v850/as85ep1.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_AS85EP1_H__
-#define __V850_AS85EP1_H__
-
-#include <asm/v850e.h>
-
-
-#define CPU_MODEL	"as85ep1"
-#define CPU_MODEL_LONG	"NEC V850E/AS85EP1"
-#define PLATFORM	"AS85EP1"
-#define PLATFORM_LONG	"NEC V850E/AS85EP1 evaluation board"
-
-#define CPU_CLOCK_FREQ	96000000 /*  96MHz */
-#define SYS_CLOCK_FREQ	CPU_CLOCK_FREQ
-
-
-/* 1MB of static RAM.  */
-#define SRAM_ADDR	0x00400000
-#define SRAM_SIZE	0x00100000 /* 1MB */
-/* About 58MB of DRAM.  This can actually be at one of two positions,
-   determined by jump JP3; we have to use the first position because the
-   second is partially out of processor instruction addressing range
-   (though in the second position there's actually 64MB available).  */
-#define SDRAM_ADDR	0x00600000
-#define SDRAM_SIZE	0x039F8000 /* approx 58MB */
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 	SRAM_ADDR
-
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  The AS85EP1 chip
-   16K of internal RAM located slightly before I/O space.  */
-#define R0_RAM_ADDR	0xFFFF8000
-
-
-/* AS85EP1 specific control registers.  */
-#define AS85EP1_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
-#define AS85EP1_CSC(n)		(*(volatile u16 *)AS85EP1_CSC_ADDR(n))
-#define AS85EP1_BSC_ADDR	0xFFFFF066
-#define AS85EP1_BSC		(*(volatile u16 *)AS85EP1_BSC_ADDR)
-#define AS85EP1_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
-#define AS85EP1_BCT(n)		(*(volatile u16 *)AS85EP1_BCT_ADDR(n))
-#define AS85EP1_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
-#define AS85EP1_DWC(n)		(*(volatile u16 *)AS85EP1_DWC_ADDR(n))
-#define AS85EP1_BCC_ADDR	0xFFFFF488
-#define AS85EP1_BCC		(*(volatile u16 *)AS85EP1_BCC_ADDR)
-#define AS85EP1_ASC_ADDR	0xFFFFF48A
-#define AS85EP1_ASC		(*(volatile u16 *)AS85EP1_ASC_ADDR)
-#define AS85EP1_BCP_ADDR	0xFFFFF48C
-#define AS85EP1_BCP		(*(volatile u16 *)AS85EP1_BCP_ADDR)
-#define AS85EP1_LBS_ADDR	0xFFFFF48E
-#define AS85EP1_LBS		(*(volatile u16 *)AS85EP1_LBS_ADDR)
-#define AS85EP1_BMC_ADDR	0xFFFFF498
-#define AS85EP1_BMC		(*(volatile u16 *)AS85EP1_BMC_ADDR)
-#define AS85EP1_PRC_ADDR	0xFFFFF49A
-#define AS85EP1_PRC		(*(volatile u16 *)AS85EP1_PRC_ADDR)
-#define AS85EP1_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
-#define AS85EP1_SCR(n)		(*(volatile u16 *)AS85EP1_SCR_ADDR(n))
-#define AS85EP1_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
-#define AS85EP1_RFS(n)		(*(volatile u16 *)AS85EP1_RFS_ADDR(n))
-#define AS85EP1_IRAMM_ADDR	0xFFFFF80A
-#define AS85EP1_IRAMM		(*(volatile u8 *)AS85EP1_IRAMM_ADDR)
-
-
-
-/* I/O port P0-P13. */
-/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
-#define AS85EP1_PORT_IO_ADDR(n)	(0xFFFFF400 + (n) * 2)
-#define AS85EP1_PORT_IO(n)	(*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define AS85EP1_PORT_PM_ADDR(n)	(0xFFFFF420 + (n) * 2)
-#define AS85EP1_PORT_PM(n)	(*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
-#define AS85EP1_PORT_PMC(n)	(*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
-#define IRQ_INTCCC(n)	(0x0C + (n))
-#define IRQ_INTCCC_NUM	8
-#define IRQ_INTCMD(n)	(0x14 + (n)) /* interval timer interrupts 0-5 */
-#define IRQ_INTCMD_NUM	6
-#define IRQ_INTSRE(n)	(0x1E + (n)*3) /* UART 0-1 reception error */
-#define IRQ_INTSRE_NUM	2
-#define IRQ_INTSR(n)	(0x1F + (n)*3) /* UART 0-1 reception completion */
-#define IRQ_INTSR_NUM	2
-#define IRQ_INTST(n)	(0x20 + (n)*3) /* UART 0-1 transmission completion */
-#define IRQ_INTST_NUM	2
-
-#define NUM_CPU_IRQS	64
-
-#ifndef __ASSEMBLY__
-/* Initialize chip interrupts.  */
-extern void as85ep1_init_irqs (void);
-#endif
-
-
-/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels).  */
-#define V850E_UART_NUM_CHANNELS		2
-#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 4)
-#define V850E_UART_CHIP_NAME 		"V850E/NA85E"
-
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	as85ep1_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void as85ep1_uart_pre_configure (unsigned chan,
-					unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
-
-/* CTS for UART channel 1 is pin P54 (bit 4 of port 5).  */
-#define V850E_UART_CTS(chan)   ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
-/* RTS for UART channel 1 is pin P53 (bit 3 of port 5).  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   if (chan == 1) {						      \
-		   unsigned old = AS85EP1_PORT_IO(5); 			      \
-		   if (val)						      \
-			   AS85EP1_PORT_IO(5) = old & ~0x8;		      \
-		   else							      \
-			   AS85EP1_PORT_IO(5) = old | 0x8;		      \
-	   }								      \
-   } while (0)
-
-
-/* Timer C details.  */
-#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
-
-/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
-#define V850E_TIMER_D_TMCD_CS_MIN	2 /* min 2^2 divider */
-
-
-#endif /* __V850_AS85EP1_H__ */
diff --git a/include/asm-v850/asm.h b/include/asm-v850/asm.h
deleted file mode 100644
index bf1e785a5dd..00000000000
--- a/include/asm-v850/asm.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-v850/asm.h -- Macros for writing assembly code
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#define G_ENTRY(name)							      \
-   .balign 4;								      \
-   .globl name;								      \
-   .type  name,@function;						      \
-   name
-#define G_DATA(name)							      \
-   .globl name;								      \
-   .type  name,@object;							      \
-   name
-#define END(name)							      \
-   .size  name,.-name
-
-#define L_ENTRY(name)							      \
-   .balign 4;								      \
-   .type  name,@function;						      \
-   name
-#define L_DATA(name)							      \
-   .type  name,@object;							      \
-   name
diff --git a/include/asm-v850/atomic.h b/include/asm-v850/atomic.h
deleted file mode 100644
index e4e57de08f7..00000000000
--- a/include/asm-v850/atomic.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * include/asm-v850/atomic.h -- Atomic operations
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ATOMIC_H__
-#define __V850_ATOMIC_H__
-
-
-#include <asm/system.h>
-
-#ifdef CONFIG_SMP
-#error SMP not supported
-#endif
-
-typedef struct { int counter; } atomic_t;
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#ifdef __KERNEL__
-
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v,i)		(((v)->counter) = (i))
-
-static inline int atomic_add_return (int i, volatile atomic_t *v)
-{
-	unsigned long flags;
-	int res;
-
-	local_irq_save (flags);
-	res = v->counter + i;
-	v->counter = res;
-	local_irq_restore (flags);
-
-	return res;
-}
-
-static __inline__ int atomic_sub_return (int i, volatile atomic_t *v)
-{
-	unsigned long flags;
-	int res;
-
-	local_irq_save (flags);
-	res = v->counter - i;
-	v->counter = res;
-	local_irq_restore (flags);
-
-	return res;
-}
-
-static __inline__ void atomic_clear_mask (unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	local_irq_save (flags);
-	*addr &= ~mask;
-	local_irq_restore (flags);
-}
-
-#endif
-
-#define atomic_add(i, v)	atomic_add_return ((i), (v))
-#define atomic_sub(i, v)	atomic_sub_return ((i), (v))
-
-#define atomic_dec_return(v)	atomic_sub_return (1, (v))
-#define atomic_inc_return(v)	atomic_add_return (1, (v))
-#define atomic_inc(v) 		atomic_inc_return (v)
-#define atomic_dec(v) 		atomic_dec_return (v)
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-#define atomic_sub_and_test(i,v)	(atomic_sub_return ((i), (v)) == 0)
-#define atomic_dec_and_test(v)		(atomic_sub_return (1, (v)) == 0)
-#define atomic_add_negative(i,v)	(atomic_add_return ((i), (v)) < 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (ret != u)
-		v->counter += a;
-	local_irq_restore(flags);
-
-	return ret != u;
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic.h>
-#endif /* __V850_ATOMIC_H__ */
diff --git a/include/asm-v850/auxvec.h b/include/asm-v850/auxvec.h
deleted file mode 100644
index f493232d022..00000000000
--- a/include/asm-v850/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __V850_AUXVEC_H__
-#define __V850_AUXVEC_H__
-
-#endif /* __V850_AUXVEC_H__ */
diff --git a/include/asm-v850/bitops.h b/include/asm-v850/bitops.h
deleted file mode 100644
index f82f5b4a56e..00000000000
--- a/include/asm-v850/bitops.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * include/asm-v850/bitops.h -- Bit operations
- *
- *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1992  Linus Torvalds.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#ifndef __V850_BITOPS_H__
-#define __V850_BITOPS_H__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>	/* unlikely  */
-#include <asm/byteorder.h>	/* swab32 */
-#include <asm/system.h>		/* interrupt enable/disable */
-
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/ffz.h>
-
-/*
- * The __ functions are not atomic
- */
-
-/* In the following constant-bit-op macros, a "g" constraint is used when
-   we really need an integer ("i" constraint).  This is to avoid
-   warnings/errors from the compiler in the case where the associated
-   operand _isn't_ an integer, and shouldn't produce bogus assembly because
-   use of that form is protected by a guard statement that checks for
-   constants, and should otherwise be removed by the optimizer.  This
-   _usually_ works -- however, __builtin_constant_p returns true for a
-   variable with a known constant value too, and unfortunately gcc will
-   happily put the variable in a register and use the register for the "g"
-   constraint'd asm operand.  To avoid the latter problem, we add a
-   constant offset to the operand and subtract it back in the asm code;
-   forcing gcc to do arithmetic on the value is usually enough to get it
-   to use a real constant value.  This is horrible, and ultimately
-   unreliable too, but it seems to work for now (hopefully gcc will offer
-   us more control in the future, so we can do a better job).  */
-
-#define __const_bit_op(op, nr, addr)					\
-  ({ __asm__ (op " (%0 - 0x123), %1"					\
-	      :: "g" (((nr) & 0x7) + 0x123),				\
-		 "m" (*((char *)(addr) + ((nr) >> 3)))			\
-	      : "memory"); })
-#define __var_bit_op(op, nr, addr)					\
-  ({ int __nr = (nr);							\
-     __asm__ (op " %0, [%1]"						\
-	      :: "r" (__nr & 0x7),					\
-		 "r" ((char *)(addr) + (__nr >> 3))			\
-	      : "memory"); })
-#define __bit_op(op, nr, addr)						\
-  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
-   ? __const_bit_op (op, nr, addr)					\
-   : __var_bit_op (op, nr, addr))
-
-#define __set_bit(nr, addr)		__bit_op ("set1", nr, addr)
-#define __clear_bit(nr, addr)		__bit_op ("clr1", nr, addr)
-#define __change_bit(nr, addr)		__bit_op ("not1", nr, addr)
-
-/* The bit instructions used by `non-atomic' variants are actually atomic.  */
-#define set_bit __set_bit
-#define clear_bit __clear_bit
-#define change_bit __change_bit
-
-
-#define __const_tns_bit_op(op, nr, addr)				      \
-  ({ int __tns_res;							      \
-     __asm__ __volatile__ (						      \
-	     "tst1 (%1 - 0x123), %2; setf nz, %0; " op " (%1 - 0x123), %2"    \
-	     : "=&r" (__tns_res)					      \
-	     : "g" (((nr) & 0x7) + 0x123),				      \
-	       "m" (*((char *)(addr) + ((nr) >> 3)))			      \
-	     : "memory");						      \
-     __tns_res;								      \
-  })
-#define __var_tns_bit_op(op, nr, addr)					      \
-  ({ int __nr = (nr);							      \
-     int __tns_res;							      \
-     __asm__ __volatile__ (						      \
-	     "tst1 %1, [%2]; setf nz, %0; " op " %1, [%2]"		      \
-	      : "=&r" (__tns_res)					      \
-	      : "r" (__nr & 0x7),					      \
-		"r" ((char *)(addr) + (__nr >> 3))			      \
-	      : "memory");						      \
-     __tns_res;								      \
-  })
-#define __tns_bit_op(op, nr, addr)					\
-  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
-   ? __const_tns_bit_op (op, nr, addr)					\
-   : __var_tns_bit_op (op, nr, addr))
-#define __tns_atomic_bit_op(op, nr, addr)				\
-  ({ int __tns_atomic_res, __tns_atomic_flags;				\
-     local_irq_save (__tns_atomic_flags);				\
-     __tns_atomic_res = __tns_bit_op (op, nr, addr);			\
-     local_irq_restore (__tns_atomic_flags);				\
-     __tns_atomic_res;							\
-  })
-
-#define __test_and_set_bit(nr, addr)	__tns_bit_op ("set1", nr, addr)
-#define test_and_set_bit(nr, addr)	__tns_atomic_bit_op ("set1", nr, addr)
-
-#define __test_and_clear_bit(nr, addr)	__tns_bit_op ("clr1", nr, addr)
-#define test_and_clear_bit(nr, addr)	__tns_atomic_bit_op ("clr1", nr, addr)
-
-#define __test_and_change_bit(nr, addr)	__tns_bit_op ("not1", nr, addr)
-#define test_and_change_bit(nr, addr)	__tns_atomic_bit_op ("not1", nr, addr)
-
-
-#define __const_test_bit(nr, addr)					      \
-  ({ int __test_bit_res;						      \
-     __asm__ __volatile__ ("tst1 (%1 - 0x123), %2; setf nz, %0"		      \
-			   : "=r" (__test_bit_res)			      \
-			   : "g" (((nr) & 0x7) + 0x123),		      \
-			     "m" (*((const char *)(addr) + ((nr) >> 3))));    \
-     __test_bit_res;							      \
-  })
-static inline int __test_bit (int nr, const void *addr)
-{
-	int res;
-	__asm__ __volatile__ ("tst1 %1, [%2]; setf nz, %0"
-			      : "=r" (res)
-			      : "r" (nr & 0x7), "r" (addr + (nr >> 3)));
-	return res;
-}
-#define test_bit(nr,addr)						\
-  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
-   ? __const_test_bit ((nr), (addr))					\
-   : __test_bit ((nr), (addr)))
-
-
-/* clear_bit doesn't provide any barrier for the compiler.  */
-#define smp_mb__before_clear_bit()	barrier ()
-#define smp_mb__after_clear_bit()	barrier ()
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#define ext2_set_bit_atomic(l,n,a)      test_and_set_bit(n,a)
-#define ext2_clear_bit_atomic(l,n,a)    test_and_clear_bit(n,a)
-
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_BITOPS_H__ */
diff --git a/include/asm-v850/bug.h b/include/asm-v850/bug.h
deleted file mode 100644
index b0ed2d35f3e..00000000000
--- a/include/asm-v850/bug.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-v850/bug.h -- Bug reporting
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_BUG_H__
-#define __V850_BUG_H__
-
-#ifdef CONFIG_BUG
-extern void __bug (void) __attribute__ ((noreturn));
-#define BUG()		__bug()
-#define HAVE_ARCH_BUG
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif /* __V850_BUG_H__ */
diff --git a/include/asm-v850/bugs.h b/include/asm-v850/bugs.h
deleted file mode 100644
index 71110a65c1d..00000000000
--- a/include/asm-v850/bugs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  include/asm-v850e/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/include/asm-v850/byteorder.h b/include/asm-v850/byteorder.h
deleted file mode 100644
index a6f07530050..00000000000
--- a/include/asm-v850/byteorder.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-v850/byteorder.h -- Endian id and conversion ops
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_BYTEORDER_H__
-#define __V850_BYTEORDER_H__
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#ifdef __GNUC__
-
-static __inline__ __attribute_const__ __u32 ___arch__swab32 (__u32 word)
-{
-	__u32 res;
-	__asm__ ("bsw %1, %0" : "=r" (res) : "r" (word));
-	return res;
-}
-
-static __inline__ __attribute_const__ __u16 ___arch__swab16 (__u16 half_word)
-{
-	__u16 res;
-	__asm__ ("bsh %1, %0" : "=r" (res) : "r" (half_word));
-	return res;
-}
-
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* __V850_BYTEORDER_H__ */
diff --git a/include/asm-v850/cache.h b/include/asm-v850/cache.h
deleted file mode 100644
index 8832c7ea324..00000000000
--- a/include/asm-v850/cache.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-v850/cache.h -- Cache operations
- *
- *  Copyright (C) 2001,05  NEC Corporation
- *  Copyright (C) 2001,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CACHE_H__
-#define __V850_CACHE_H__
-
-/* All cache operations are machine-dependent.  */
-#include <asm/machdep.h>
-
-#ifndef L1_CACHE_BYTES
-/* This processor has no cache, so just choose an arbitrary value.  */
-#define L1_CACHE_BYTES		16
-#define L1_CACHE_SHIFT		4
-#endif
-
-#endif /* __V850_CACHE_H__ */
diff --git a/include/asm-v850/cacheflush.h b/include/asm-v850/cacheflush.h
deleted file mode 100644
index 9ece05a202e..00000000000
--- a/include/asm-v850/cacheflush.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-v850/cacheflush.h
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CACHEFLUSH_H__
-#define __V850_CACHEFLUSH_H__
-
-/* Somebody depends on this; sigh...  */
-#include <linux/mm.h>
-
-#include <asm/machdep.h>
-
-
-/* The following are all used by the kernel in ways that only affect
-   systems with MMUs, so we don't need them.  */
-#define flush_cache_all()			((void)0)
-#define flush_cache_mm(mm)			((void)0)
-#define flush_cache_dup_mm(mm)			((void)0)
-#define flush_cache_range(vma, start, end)	((void)0)
-#define flush_cache_page(vma, vmaddr, pfn)	((void)0)
-#define flush_dcache_page(page)			((void)0)
-#define flush_dcache_mmap_lock(mapping)		((void)0)
-#define flush_dcache_mmap_unlock(mapping)	((void)0)
-#define flush_cache_vmap(start, end)		((void)0)
-#define flush_cache_vunmap(start, end)		((void)0)
-
-#ifdef CONFIG_NO_CACHE
-
-/* Some systems have no cache at all, in which case we don't need these
-   either.  */
-#define flush_icache()				((void)0)
-#define flush_icache_range(start, end)		((void)0)
-#define flush_icache_page(vma,pg)		((void)0)
-#define flush_icache_user_range(vma,pg,adr,len)	((void)0)
-#define flush_cache_sigtramp(vaddr)		((void)0)
-
-#else /* !CONFIG_NO_CACHE */
-
-struct page;
-struct mm_struct;
-struct vm_area_struct;
-
-/* Otherwise, somebody had better define them.  */
-extern void flush_icache (void);
-extern void flush_icache_range (unsigned long start, unsigned long end);
-extern void flush_icache_page (struct vm_area_struct *vma, struct page *page);
-extern void flush_icache_user_range (struct vm_area_struct *vma,
-				     struct page *page,
-				     unsigned long adr, int len);
-extern void flush_cache_sigtramp (unsigned long addr);
-
-#endif /* CONFIG_NO_CACHE */
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy(dst, src, len); \
-     flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-#endif /* __V850_CACHEFLUSH_H__ */
diff --git a/include/asm-v850/checksum.h b/include/asm-v850/checksum.h
deleted file mode 100644
index d1dddd93826..00000000000
--- a/include/asm-v850/checksum.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * include/asm-v850/checksum.h -- Checksum ops
- *
- *  Copyright (C) 2001,2005  NEC Corporation
- *  Copyright (C) 2001,2005  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CHECKSUM_H__
-#define __V850_CHECKSUM_H__
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_nocheck(const void *src,
-				   void *dst, int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user (const void *src,
-					     void *dst,
-					     int len, __wsum sum,
-					     int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-static inline __sum16 csum_fold (__wsum sum)
-{
-	unsigned int result;
-	/*
-			        %0		%1
-	      hsw %1, %0	H     L		L     H
-	      add %1, %0	H     L		H+L+C H+L
-	*/
-	asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
-	return (__force __sum16)(~result >> 16);
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __wsum
-csum_tcpudp_nofold (__be32 saddr, __be32 daddr,
-		    unsigned short len,
-		    unsigned short proto, __wsum sum)
-{
-	int __carry;
-	__asm__ ("add %2, %0;"
-		 "setf c, %1;"
-		 "add %1, %0;"
-		 "add %3, %0;"
-		 "setf c, %1;"
-		 "add %1, %0;"
-		 "add %4, %0;"
-		 "setf c, %1;"
-		 "add %1, %0"
-		 : "=&r" (sum), "=&r" (__carry)
-		 : "r" (daddr), "r" (saddr),
-		 "r" ((len + proto) << 8),
-		 "0" (sum));
-	return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic (__be32 saddr, __be32 daddr,
-		   unsigned short len,
-		   unsigned short proto, __wsum sum)
-{
-	return csum_fold (csum_tcpudp_nofold (saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-
-#endif /* __V850_CHECKSUM_H__ */
diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h
deleted file mode 100644
index c389691d6f8..00000000000
--- a/include/asm-v850/clinkage.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-v850/clinkage.h -- Macros to reflect C symbol-naming conventions
- *
- *  Copyright (C) 2001,02  NEC Corporatione
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CLINKAGE_H__
-#define __V850_CLINKAGE_H__
-
-#include <asm/macrology.h>
-#include <asm/asm.h>
-
-#define C_SYMBOL_NAME(name) 	macrology_paste(_, name)
-#define C_SYMBOL_STRING(name)	macrology_stringify(C_SYMBOL_NAME(name))
-#define C_ENTRY(name)		G_ENTRY(C_SYMBOL_NAME(name))
-#define C_DATA(name)		G_DATA(C_SYMBOL_NAME(name))
-#define C_END(name)		END(C_SYMBOL_NAME(name))
-
-#endif /* __V850_CLINKAGE_H__ */
diff --git a/include/asm-v850/cputime.h b/include/asm-v850/cputime.h
deleted file mode 100644
index 7c799c33b8a..00000000000
--- a/include/asm-v850/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_CPUTIME_H
-#define __V850_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __V850_CPUTIME_H */
diff --git a/include/asm-v850/current.h b/include/asm-v850/current.h
deleted file mode 100644
index 30aae567377..00000000000
--- a/include/asm-v850/current.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-v850/current.h -- Current task
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CURRENT_H__
-#define __V850_CURRENT_H__
-
-#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe.  */
-#include <linux/thread_info.h>
-#endif
-
-#include <asm/macrology.h>
-
-
-/* Register used to hold the current task pointer while in the kernel.
-   Any `call clobbered' register without a special meaning should be OK,
-   but check asm/v850/kernel/entry.S to be sure.  */
-#define CURRENT_TASK_REGNUM	16
-#define CURRENT_TASK 		macrology_paste (r, CURRENT_TASK_REGNUM)
-
-
-#ifdef __ASSEMBLY__
-
-/* Put a pointer to the current task structure into REG.  */
-#define GET_CURRENT_TASK(reg)						\
-	GET_CURRENT_THREAD(reg);					\
-	ld.w	TI_TASK[reg], reg
-
-#else /* !__ASSEMBLY__ */
-
-/* A pointer to the current task.  */
-register struct task_struct *current					\
-   __asm__ (macrology_stringify (CURRENT_TASK));
-
-#endif /* __ASSEMBLY__ */
-
-
-#endif /* _V850_CURRENT_H */
diff --git a/include/asm-v850/delay.h b/include/asm-v850/delay.h
deleted file mode 100644
index 6d028e6b235..00000000000
--- a/include/asm-v850/delay.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-v850/delay.h -- Delay routines, using a pre-computed
- * 	"loops_per_second" value
- *
- *  Copyright (C) 2001,03  NEC Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1994 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#ifndef __V850_DELAY_H__
-#define __V850_DELAY_H__
-
-#include <asm/param.h>
-
-static inline void __delay(unsigned long loops)
-{
-	if (loops)
-		__asm__ __volatile__ ("1: add -1, %0; bnz 1b"
-				      : "=r" (loops) : "0" (loops));
-}
-
-/*
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)  
- */
-
-extern unsigned long loops_per_jiffy;
-
-static inline void udelay(unsigned long usecs)
-{
-	register unsigned long full_loops, part_loops;
-
-	full_loops = ((usecs * HZ) / 1000000) * loops_per_jiffy;
-	usecs %= (1000000 / HZ);
-	part_loops = (usecs * HZ * loops_per_jiffy) / 1000000;
-
-	__delay(full_loops + part_loops);
-}
-
-#endif /* __V850_DELAY_H__ */
diff --git a/include/asm-v850/device.h b/include/asm-v850/device.h
deleted file mode 100644
index d8f9872b0e2..00000000000
--- a/include/asm-v850/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-v850/div64.h b/include/asm-v850/div64.h
deleted file mode 100644
index 6cd978cefb2..00000000000
--- a/include/asm-v850/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-v850/dma-mapping.h b/include/asm-v850/dma-mapping.h
deleted file mode 100644
index 1cc42c603a1..00000000000
--- a/include/asm-v850/dma-mapping.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __V850_DMA_MAPPING_H__
-#define __V850_DMA_MAPPING_H__
-
-
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-#endif /* __V850_DMA_MAPPING_H__ */
diff --git a/include/asm-v850/dma.h b/include/asm-v850/dma.h
deleted file mode 100644
index 2369849e2d0..00000000000
--- a/include/asm-v850/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __V850_DMA_H__
-#define __V850_DMA_H__
-
-/* What should this be?  */
-#define MAX_DMA_ADDRESS	0xFFFFFFFF
-
-/* reserve a DMA channel */
-extern int request_dma (unsigned int dmanr, const char * device_id);
-/* release it again */
-extern void free_dma (unsigned int dmanr);
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
-#endif /* __V850_DMA_H__ */
diff --git a/include/asm-v850/elf.h b/include/asm-v850/elf.h
deleted file mode 100644
index 28f5b176ff1..00000000000
--- a/include/asm-v850/elf.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef __V850_ELF_H__
-#define __V850_ELF_H__
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-#include <asm/byteorder.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x)  \
-  ((x)->e_machine == EM_V850 || (x)->e_machine == EM_CYGNUS_V850)
-
-
-/* v850 relocation types.  */
-#define R_V850_NONE		0
-#define R_V850_9_PCREL		1
-#define R_V850_22_PCREL		2
-#define R_V850_HI16_S		3
-#define R_V850_HI16		4
-#define R_V850_LO16		5
-#define R_V850_32		6
-#define R_V850_16		7
-#define R_V850_8		8
-#define R_V850_SDA_16_16_OFFSET	9	/* For ld.b, st.b, set1, clr1,
-					   not1, tst1, movea, movhi */
-#define R_V850_SDA_15_16_OFFSET	10	/* For ld.w, ld.h, ld.hu, st.w, st.h */
-#define R_V850_ZDA_16_16_OFFSET	11	/* For ld.b, st.b, set1, clr1,
-					   not1, tst1, movea, movhi */
-#define R_V850_ZDA_15_16_OFFSET	12	/* For ld.w, ld.h, ld.hu, st.w, st.h */
-#define R_V850_TDA_6_8_OFFSET	13	/* For sst.w, sld.w */
-#define R_V850_TDA_7_8_OFFSET	14	/* For sst.h, sld.h */
-#define R_V850_TDA_7_7_OFFSET	15	/* For sst.b, sld.b */
-#define R_V850_TDA_16_16_OFFSET	16	/* For set1, clr1, not1, tst1,
-					   movea, movhi */
-#define R_V850_NUM		17
-
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA	ELFDATA2LSB
-#else
-#define ELF_DATA	ELFDATA2MSB
-#endif
-#define ELF_ARCH	EM_V850
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-
-#define ELF_CORE_COPY_REGS(_dest,_regs)				\
-	memcpy((char *) &_dest, (char *) _regs,			\
-	       sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports.  This could be done in user space,
-   but it's not easy, and we've already done it here.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define ELF_PLATFORM  (NULL)
-
-#define ELF_PLAT_INIT(_r, load_addr)					      \
-  do {									      \
-	 _r->gpr[0] =  _r->gpr[1] =  _r->gpr[2] =  _r->gpr[3] =		      \
-	 _r->gpr[4] =  _r->gpr[5] =  _r->gpr[6] =  _r->gpr[7] =		      \
-	 _r->gpr[8] =  _r->gpr[9] = _r->gpr[10] = _r->gpr[11] =		      \
-	_r->gpr[12] = _r->gpr[13] = _r->gpr[14] = _r->gpr[15] =		      \
-	_r->gpr[16] = _r->gpr[17] = _r->gpr[18] = _r->gpr[19] =		      \
-	_r->gpr[20] = _r->gpr[21] = _r->gpr[22] = _r->gpr[23] =		      \
-	_r->gpr[24] = _r->gpr[25] = _r->gpr[26] = _r->gpr[27] =		      \
-	_r->gpr[28] = _r->gpr[29] = _r->gpr[30] = _r->gpr[31] =		      \
-	0;								      \
-  } while (0)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
-
-#endif /* __V850_ELF_H__ */
diff --git a/include/asm-v850/emergency-restart.h b/include/asm-v850/emergency-restart.h
deleted file mode 100644
index 108d8c48e42..00000000000
--- a/include/asm-v850/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-v850/entry.h b/include/asm-v850/entry.h
deleted file mode 100644
index d9df8ac4858..00000000000
--- a/include/asm-v850/entry.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-v850/entry.h -- Definitions used by low-level trap handlers
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ENTRY_H__
-#define __V850_ENTRY_H__
-
-
-#include <asm/ptrace.h>
-#include <asm/machdep.h>
-
-
-/* These are special variables using by the kernel trap/interrupt code
-   to save registers in, at a time when there are no spare registers we
-   can use to do so, and we can't depend on the value of the stack
-   pointer.  This means that they must be within a signed 16-bit
-   displacement of 0x00000000.  */
-
-#define KERNEL_VAR_SPACE_ADDR	R0_RAM_ADDR
-
-#ifdef __ASSEMBLY__
-#define KERNEL_VAR(addr)	addr[r0]
-#else
-#define KERNEL_VAR(addr)	(*(volatile unsigned long *)(addr))
-#endif
-
-/* Kernel stack pointer, 4 bytes.  */
-#define KSP_ADDR		(KERNEL_VAR_SPACE_ADDR +  0)
-#define KSP			KERNEL_VAR (KSP_ADDR)
-/* 1 if in kernel-mode, 0 if in user mode, 1 byte.  */
-#define KM_ADDR 		(KERNEL_VAR_SPACE_ADDR +  4)
-#define KM			KERNEL_VAR (KM_ADDR)
-/* Temporary storage for interrupt handlers, 4 bytes.  */
-#define INT_SCRATCH_ADDR	(KERNEL_VAR_SPACE_ADDR +  8)
-#define INT_SCRATCH		KERNEL_VAR (INT_SCRATCH_ADDR)
-/* Where the stack-pointer is saved when jumping to various sorts of
-   interrupt handlers.  ENTRY_SP is used by everything except NMIs,
-   which have their own location.  Higher-priority NMIs can clobber the
-   value written by a lower priority NMI, since they can't be disabled,
-   but that's OK, because only NMI0 (the lowest-priority one) is allowed
-   to return.  */
-#define ENTRY_SP_ADDR		(KERNEL_VAR_SPACE_ADDR + 12)
-#define ENTRY_SP		KERNEL_VAR (ENTRY_SP_ADDR)
-#define NMI_ENTRY_SP_ADDR	(KERNEL_VAR_SPACE_ADDR + 16)
-#define NMI_ENTRY_SP		KERNEL_VAR (NMI_ENTRY_SP_ADDR)
-
-#ifdef CONFIG_RESET_GUARD
-/* Used to detect unexpected resets (since the v850 has no MMU, any call
-   through a null pointer will jump to the reset vector).  We detect
-   such resets by checking for a magic value, RESET_GUARD_ACTIVE, in
-   this location.  Properly resetting the machine stores zero there, so
-   it shouldn't trigger the guard; the power-on value is uncertain, but
-   it's unlikely to be RESET_GUARD_ACTIVE.  */
-#define RESET_GUARD_ADDR	(KERNEL_VAR_SPACE_ADDR + 28)
-#define RESET_GUARD		KERNEL_VAR (RESET_GUARD_ADDR)
-#define RESET_GUARD_ACTIVE	0xFAB4BEEF
-#endif /* CONFIG_RESET_GUARD */
-
-#ifdef CONFIG_V850E_HIGHRES_TIMER
-#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32)
-#define HIGHRES_TIMER_SLOW_TICKS     KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR)
-#endif /* CONFIG_V850E_HIGHRES_TIMER */
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_RESET_GUARD
-/* Turn off reset guard, so that resetting the machine works normally.
-   This should be called in the various machine_halt, etc., functions.  */
-static inline void disable_reset_guard (void)
-{
-	RESET_GUARD = 0;
-}
-#endif /* CONFIG_RESET_GUARD */
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* A `state save frame' is a struct pt_regs preceded by some extra space
-   suitable for a function call stack frame.  */
-
-/* Amount of room on the stack reserved for arguments and to satisfy the
-   C calling conventions, in addition to the space used by the struct
-   pt_regs that actually holds saved values.  */
-#define STATE_SAVE_ARG_SPACE	(6*4) /* Up to six arguments.  */
-
-
-#ifdef __ASSEMBLY__
-
-/* The size of a state save frame.  */
-#define STATE_SAVE_SIZE		(PT_SIZE + STATE_SAVE_ARG_SPACE)
-
-#else /* !__ASSEMBLY__ */
-
-/* The size of a state save frame.  */
-#define STATE_SAVE_SIZE	       (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE)
-
-#endif /* __ASSEMBLY__ */
-
-
-/* Offset of the struct pt_regs in a state save frame.  */
-#define STATE_SAVE_PT_OFFSET	STATE_SAVE_ARG_SPACE
-
-
-#endif /* __V850_ENTRY_H__ */
diff --git a/include/asm-v850/errno.h b/include/asm-v850/errno.h
deleted file mode 100644
index 31c91df0120..00000000000
--- a/include/asm-v850/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_ERRNO_H__
-#define __V850_ERRNO_H__
-
-#include <asm-generic/errno.h>
-
-#endif /* __V850_ERRNO_H__ */
diff --git a/include/asm-v850/fb.h b/include/asm-v850/fb.h
deleted file mode 100644
index c7df3803099..00000000000
--- a/include/asm-v850/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-v850/fcntl.h b/include/asm-v850/fcntl.h
deleted file mode 100644
index 3af4d56776d..00000000000
--- a/include/asm-v850/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __V850_FCNTL_H__
-#define __V850_FCNTL_H__
-
-#define O_DIRECTORY	040000	/* must be a directory */
-#define O_NOFOLLOW     0100000	/* don't follow links */
-#define O_DIRECT       0200000	/* direct disk access hint - currently ignored */
-#define O_LARGEFILE    0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif /* __V850_FCNTL_H__ */
diff --git a/include/asm-v850/flat.h b/include/asm-v850/flat.h
deleted file mode 100644
index 17f0ea56661..00000000000
--- a/include/asm-v850/flat.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * include/asm-v850/flat.h -- uClinux flat-format executables
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_FLAT_H__
-#define __V850_FLAT_H__
-
-/* The amount by which a relocation can exceed the program image limits
-   without being regarded as an error.  On the v850, the relocations of
-   some base-pointers can be offset by 0x8000 (to allow better usage of the
-   space offered by 16-bit signed offsets -- in most cases the offsets used
-   with such a base-pointer will be negative).  */
-
-#define	flat_reloc_valid(reloc, size)	((reloc) <= (size + 0x8000))
-
-#define	flat_stack_align(sp)		/* nothing needed */
-#define	flat_argvp_envp_on_stack()	0
-#define	flat_old_ram_flag(flags)	(flags)
-#define	flat_set_persistent(relval, p)	0
-
-/* We store the type of relocation in the top 4 bits of the `relval.' */
-
-/* Convert a relocation entry into an address.  */
-static inline unsigned long
-flat_get_relocate_addr (unsigned long relval)
-{
-	return relval & 0x0fffffff; /* Mask out top 4-bits */
-}
-
-#define flat_v850_get_reloc_type(relval) ((relval) >> 28)
-
-#define FLAT_V850_R_32		0 /* Normal 32-bit reloc */
-#define FLAT_V850_R_HI16S_LO15	1 /* High 16-bits + signed 15-bit low field */
-#define FLAT_V850_R_HI16S_LO16	2 /* High 16-bits + signed 16-bit low field */
-
-/* Extract the address to be relocated from the symbol reference at RP;
-   RELVAL is the raw relocation-table entry from which RP is derived.
-   For the v850, RP should always be half-word aligned.  */
-static inline unsigned long flat_get_addr_from_rp (unsigned long *rp,
-						   unsigned long relval,
-						   unsigned long flags,
-						   unsigned long *persistent)
-{
-	short *srp = (short *)rp;
-
-	switch (flat_v850_get_reloc_type (relval))
-	{
-	case FLAT_V850_R_32:
-		/* Simple 32-bit address.  */
-		return srp[0] | (srp[1] << 16);
-
-	case FLAT_V850_R_HI16S_LO16:
-		/* The high and low halves of the address are in the 16
-		   bits at RP, and the 2nd word of the 32-bit instruction
-		   following that, respectively.  The low half is _signed_
-		   so we have to sign-extend it and add it to the upper
-		   half instead of simply or-ing them together.
-
-		   Unlike most relocated address, this one is stored in
-		   native (little-endian) byte-order to avoid problems with
-		   trashing the low-order bit, so we have to convert to
-		   network-byte-order before returning, as that's what the
-		   caller expects.  */
-		return htonl ((srp[0] << 16) + srp[2]);
-
-	case FLAT_V850_R_HI16S_LO15:
-		/* The high and low halves of the address are in the 16
-		   bits at RP, and the upper 15 bits of the 2nd word of the
-		   32-bit instruction following that, respectively.  The
-		   low half is _signed_ so we have to sign-extend it and
-		   add it to the upper half instead of simply or-ing them
-		   together.  The lowest bit is always zero.
-
-		   Unlike most relocated address, this one is stored in
-		   native (little-endian) byte-order to avoid problems with
-		   trashing the low-order bit, so we have to convert to
-		   network-byte-order before returning, as that's what the
-		   caller expects.  */
-		return htonl ((srp[0] << 16) + (srp[2] & ~0x1));
-
-	default:
-		return ~0;	/* bogus value */
-	}
-}
-
-/* Insert the address ADDR into the symbol reference at RP;
-   RELVAL is the raw relocation-table entry from which RP is derived.
-   For the v850, RP should always be half-word aligned.  */
-static inline void flat_put_addr_at_rp (unsigned long *rp, unsigned long addr,
-					unsigned long relval)
-{
-	short *srp = (short *)rp;
-
-	switch (flat_v850_get_reloc_type (relval)) {
-	case FLAT_V850_R_32:
-		/* Simple 32-bit address.  */
-		srp[0] = addr & 0xFFFF;
-		srp[1] = (addr >> 16);
-		break;
-
-	case FLAT_V850_R_HI16S_LO16:
-		/* The high and low halves of the address are in the 16
-		   bits at RP, and the 2nd word of the 32-bit instruction
-		   following that, respectively.  The low half is _signed_
-		   so we must carry its sign bit to the upper half before
-		   writing the upper half.  */
-		srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
-		srp[2] = addr & 0xFFFF;
-		break;
-
-	case FLAT_V850_R_HI16S_LO15:
-		/* The high and low halves of the address are in the 16
-		   bits at RP, and the upper 15 bits of the 2nd word of the
-		   32-bit instruction following that, respectively.  The
-		   low half is _signed_ so we must carry its sign bit to
-		   the upper half before writing the upper half.  The
-		   lowest bit we preserve from the existing instruction.  */
-		srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
-		srp[2] = (addr & 0xFFFE) | (srp[2] & 0x1);
-		break;
-	}
-}
-
-#endif /* __V850_FLAT_H__ */
diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h
deleted file mode 100644
index 23aae666c71..00000000000
--- a/include/asm-v850/fpga85e2c.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * include/asm-v850/fpga85e2c.h -- Machine-dependent defs for
- *	FPGA implementation of V850E2/NA85E2C
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_FPGA85E2C_H__
-#define __V850_FPGA85E2C_H__
-
-#include <asm/v850e2.h>
-#include <asm/clinkage.h>
-
-
-#define CPU_MODEL	"v850e2/fpga85e2c"
-#define CPU_MODEL_LONG	"NEC V850E2/NA85E2C"
-#define PLATFORM	"fpga85e2c"
-#define PLATFORM_LONG	"NA85E2C FPGA implementation"
-
-
-/* `external ram'.  */
-#define ERAM_ADDR		0
-#define ERAM_SIZE		0x00100000 /* 1MB */
-
-
-/* FPGA specific control registers.  */
-
-/* Writing a non-zero value to FLGREG(0) will signal the controlling CPU
-   to stop execution.  */
-#define FLGREG_ADDR(n)		(0xFFE80100 + 2*(n))
-#define FLGREG(n)		(*(volatile unsigned char *)FLGREG_ADDR (n))
-#define FLGREG_NUM		2
-
-#define CSDEV_ADDR(n)		(0xFFE80110 + 2*(n))
-#define CSDEV(n)		(*(volatile unsigned char *)CSDEV_ADDR (n))
-
-
-/* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384.  */
-#define IRQ_RPU(n)		(60 + (n))
-#define IRQ_RPU_NUM		4
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS		64
-
-
-/* General-purpose timer.  */
-/* control/status register (can only be read/written via bit insns) */
-#define RPU_GTMC_ADDR		0xFFFFFB00
-#define RPU_GTMC		(*(volatile unsigned char *)RPU_GTMC_ADDR)
-#define RPU_GTMC_CE_BIT		7 /* clock enable (control) */
-#define RPU_GTMC_OV_BIT		6 /* overflow (status) */
-#define RPU_GTMC_CLK_BIT	1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */
-/* 32-bit count (8 least-significant bits are always zero).  */
-#define RPU_GTM_ADDR		0xFFFFFB28
-#define RPU_GTM			(*(volatile unsigned long *)RPU_GTMC_ADDR)
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET		ERAM_ADDR /* minimum allocatable address */
-
-
-/* For <asm/entry.h> */
-/* `R0 RAM', used for a few miscellaneous variables that must be accessible
-   using a load instruction relative to R0.  The FPGA implementation
-   actually has no on-chip RAM, so we use part of main ram just after the
-   interrupt vectors.  */
-#ifdef __ASSEMBLY__
-#define R0_RAM_ADDR		lo(C_SYMBOL_NAME(_r0_ram))
-#else
-extern char _r0_ram;
-#define R0_RAM_ADDR		((unsigned long)&_r0_ram);
-#endif
-
-
-#endif /* __V850_FPGA85E2C_H__ */
diff --git a/include/asm-v850/futex.h b/include/asm-v850/futex.h
deleted file mode 100644
index 6a332a9f099..00000000000
--- a/include/asm-v850/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-v850/gbus_int.h b/include/asm-v850/gbus_int.h
deleted file mode 100644
index 0c4bce753c7..00000000000
--- a/include/asm-v850/gbus_int.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * include/asm-v850/gbus_int.h -- Midas labs GBUS interrupt support
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_GBUS_INT_H__
-#define __V850_GBUS_INT_H__
-
-
-/* The GBUS interrupt interface has 32 interrupts shared among 4
-   processor interrupts.  The 32 GBUS interrupts are divided into two
-   sets of 16 each, for allocating among control registers, etc (there
-   are two of each control register, with bits 0-15 controlling an
-   interrupt each).  */
-
-/* The GBUS interrupts themselves.  */
-#define IRQ_GBUS_INT(n)		(GBUS_INT_BASE_IRQ + (n))
-#define IRQ_GBUS_INT_NUM	32
-
-/* Control registers.  */
-#define GBUS_INT_STATUS_ADDR(w)	(GBUS_INT_BASE_ADDR + (w)*0x40)
-#define GBUS_INT_STATUS(w)	(*(volatile u16 *)GBUS_INT_STATUS_ADDR(w))
-#define GBUS_INT_CLEAR_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x10 + (w)*0x40)
-#define GBUS_INT_CLEAR(w)	(*(volatile u16 *)GBUS_INT_CLEAR_ADDR(w))
-#define GBUS_INT_EDGE_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x20 + (w)*0x40)
-#define GBUS_INT_EDGE(w)	(*(volatile u16 *)GBUS_INT_EDGE_ADDR(w))
-#define GBUS_INT_POLARITY_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x30 + (w)*0x40)
-#define GBUS_INT_POLARITY(w)	(*(volatile u16 *)GBUS_INT_POLARITY_ADDR(w))
-/* This allows enabling interrupt bits in word W for interrupt GINTn.  */
-#define GBUS_INT_ENABLE_ADDR(w, n) \
-   (GBUS_INT_BASE_ADDR + 0x100 + (w)*0x10 + (n)*0x20)
-#define GBUS_INT_ENABLE(w, n)	(*(volatile u16 *)GBUS_INT_ENABLE_ADDR(w, n))
-
-/* Mapping between kernel interrupt numbers and hardware control regs/bits.  */
-#define GBUS_INT_BITS_PER_WORD	16
-#define GBUS_INT_NUM_WORDS	(IRQ_GBUS_INT_NUM / GBUS_INT_BITS_PER_WORD)
-#define GBUS_INT_IRQ_WORD(irq)	(((irq) - GBUS_INT_BASE_IRQ) >> 4)
-#define GBUS_INT_IRQ_BIT(irq)	(((irq) - GBUS_INT_BASE_IRQ) & 0xF)
-#define GBUS_INT_IRQ_MASK(irq)	(1 << GBUS_INT_IRQ_BIT(irq))
-
-
-/* Possible priorities for GBUS interrupts.  */
-#define GBUS_INT_PRIORITY_HIGH		2
-#define GBUS_INT_PRIORITY_MEDIUM	4
-#define GBUS_INT_PRIORITY_LOW		6
-
-
-#ifndef __ASSEMBLY__
-
-/* Enable interrupt handling for interrupt IRQ.  */
-extern void gbus_int_enable_irq (unsigned irq);
-/* Disable interrupt handling for interrupt IRQ.  Note that any
-   interrupts received while disabled will be delivered once the
-   interrupt is enabled again, unless they are explicitly cleared using
-   `gbus_int_clear_pending_irq'.  */
-extern void gbus_int_disable_irq (unsigned irq);
-/* Return true if interrupt handling for interrupt IRQ is enabled.  */
-extern int gbus_int_irq_enabled (unsigned irq);
-/* Disable all GBUS irqs.  */
-extern void gbus_int_disable_irqs (void);
-/* Clear any pending interrupts for IRQ.  */
-extern void gbus_int_clear_pending_irq (unsigned irq);
-/* Return true if interrupt IRQ is pending (but disabled).  */
-extern int gbus_int_irq_pending (unsigned irq);
-
-
-struct gbus_int_irq_init {
-	const char *name;	/* name of interrupt type */
-
-	/* Range of kernel irq numbers for this type:
-	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
-	unsigned base, num, interval;
-
-	unsigned priority;	/* interrupt priority to assign */
-};
-struct hw_interrupt_type;	/* fwd decl */
-
-/* Initialize HW_IRQ_TYPES for GBUS irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-extern void gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
-				     struct hw_interrupt_type *hw_irq_types);
-
-/* Initialize GBUS interrupts.  */
-extern void gbus_int_init_irqs (void);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_GBUS_INT_H__ */
diff --git a/include/asm-v850/hardirq.h b/include/asm-v850/hardirq.h
deleted file mode 100644
index 04e20127c5a..00000000000
--- a/include/asm-v850/hardirq.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __V850_HARDIRQ_H__
-#define __V850_HARDIRQ_H__
-
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-#include <asm/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS	8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-void ack_bad_irq(unsigned int irq);
-
-#endif /* __V850_HARDIRQ_H__ */
diff --git a/include/asm-v850/highres_timer.h b/include/asm-v850/highres_timer.h
deleted file mode 100644
index 486fb49ceab..00000000000
--- a/include/asm-v850/highres_timer.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-v850/highres_timer.h -- High resolution timing routines
- *
- *  Copyright (C) 2001,03  NEC Electronics Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_HIGHRES_TIMER_H__
-#define __V850_HIGHRES_TIMER_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/time.h>
-#endif
-
-#include <asm/entry.h>
-
-
-/* Frequency of the `slow ticks' (one tick each time the fast-tick
-   counter overflows).  */
-#define HIGHRES_TIMER_SLOW_TICK_RATE	25
-
-/* Which timer in the V850E `Timer D' we use.  */
-#define HIGHRES_TIMER_TIMER_D_UNIT	3
-
-
-#ifndef __ASSEMBLY__
-
-extern void highres_timer_start (void), highres_timer_stop (void);
-extern void highres_timer_reset (void);
-extern void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks);
-extern void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
-					    struct timeval *tv);
-extern void highres_timer_read (struct timeval *tv);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_HIGHRES_TIMER_H__ */
diff --git a/include/asm-v850/hw_irq.h b/include/asm-v850/hw_irq.h
deleted file mode 100644
index 043e94bb6bd..00000000000
--- a/include/asm-v850/hw_irq.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __V850_HW_IRQ_H__
-#define __V850_HW_IRQ_H__
-
-#endif /* __V850_HW_IRQ_H__ */
diff --git a/include/asm-v850/io.h b/include/asm-v850/io.h
deleted file mode 100644
index cdad251fba9..00000000000
--- a/include/asm-v850/io.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * include/asm-v850/io.h -- Misc I/O operations
- *
- *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_IO_H__
-#define __V850_IO_H__
-
-#define IO_SPACE_LIMIT 0xFFFFFFFF
-
-#define readb(addr) \
-  ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
-  ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
-  ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; })
-
-#define readb_relaxed(a) readb(a)
-#define readw_relaxed(a) readw(a)
-#define readl_relaxed(a) readl(a)
-
-#define writeb(val, addr) \
-  (void)((*(volatile unsigned char *) (addr)) = (val))
-#define writew(val, addr) \
-  (void)((*(volatile unsigned short *) (addr)) = (val))
-#define writel(val, addr) \
-  (void)((*(volatile unsigned int *) (addr)) = (val))
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-#define inb(addr)	readb (addr)
-#define inw(addr)	readw (addr)
-#define inl(addr)	readl (addr)
-#define outb(x, addr)	((void) writeb (x, addr))
-#define outw(x, addr)	((void) writew (x, addr))
-#define outl(x, addr)	((void) writel (x, addr))
-
-#define inb_p(port)		inb((port))
-#define outb_p(val, port)	outb((val), (port))
-#define inw_p(port)		inw((port))
-#define outw_p(val, port)	outw((val), (port))
-#define inl_p(port)		inl((port))
-#define outl_p(val, port)	outl((val), (port))
-
-static inline void insb (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned char *p = dst;
-	while (count--)
-		*p++ = inb (port);
-}
-static inline void insw (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned short *p = dst;
-	while (count--)
-		*p++ = inw (port);
-}
-static inline void insl (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned long *p = dst;
-	while (count--)
-		*p++ = inl (port);
-}
-
-static inline void
-outsb (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned char *p = src;
-	while (count--)
-		outb (*p++, port);
-}
-static inline void
-outsw (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned short *p = src;
-	while (count--)
-		outw (*p++, port);
-}
-static inline void
-outsl (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned long *p = src;
-	while (count--)
-		outl (*p++, port);
-}
-
-
-/* Some places try to pass in an loff_t for PHYSADDR (?!), so we cast it to
-   long before casting it to a pointer to avoid compiler warnings.  */
-#define ioremap(physaddr, size)	((void __iomem *)(unsigned long)(physaddr))
-#define iounmap(addr)		((void)0)
-
-#define ioremap_nocache(physaddr, size)		ioremap (physaddr, size)
-#define ioremap_writethrough(physaddr, size)	ioremap (physaddr, size)
-#define ioremap_fullcache(physaddr, size)	ioremap (physaddr, size)
-
-#define ioread8(addr)		readb (addr)
-#define ioread16(addr)		readw (addr)
-#define ioread32(addr)		readl (addr)
-#define iowrite8(val, addr)	writeb (val, addr)
-#define iowrite16(val, addr)	writew (val, addr)
-#define iowrite32(val, addr)	writel (val, addr)
-
-#define mmiowb()
-
-#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
-#if 0
-/* This is really stupid; don't define it.  */
-#define page_to_bus(page)       page_to_phys (page)
-#endif
-
-/* Conversion between virtual and physical mappings.  */
-#define phys_to_virt(addr)	((void *)__phys_to_virt (addr))
-#define virt_to_phys(addr)	((unsigned long)__virt_to_phys (addr))
-
-#define memcpy_fromio(dst, src, len) memcpy (dst, (void *)src, len)
-#define memcpy_toio(dst, src, len) memcpy ((void *)dst, src, len)
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __V850_IO_H__ */
diff --git a/include/asm-v850/ioctl.h b/include/asm-v850/ioctl.h
deleted file mode 100644
index b279fe06dfe..00000000000
--- a/include/asm-v850/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-v850/ioctls.h b/include/asm-v850/ioctls.h
deleted file mode 100644
index 5313abd5f38..00000000000
--- a/include/asm-v850/ioctls.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef __V850_IOCTLS_H__
-#define __V850_IOCTLS_H__
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define FIOQSIZE	0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-#endif /* __V850_IOCTLS_H__ */
diff --git a/include/asm-v850/ipcbuf.h b/include/asm-v850/ipcbuf.h
deleted file mode 100644
index d8cbe9886d9..00000000000
--- a/include/asm-v850/ipcbuf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __V850E_IPCBUF_H__
-#define __V850E_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for v850e architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __V850E_IPCBUF_H__ */
diff --git a/include/asm-v850/irq.h b/include/asm-v850/irq.h
deleted file mode 100644
index 7d0d4cd1ce5..00000000000
--- a/include/asm-v850/irq.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-v850/irq.h -- Machine interrupt handling
- *
- *  Copyright (C) 2001,02,04  NEC Electronics Corporation
- *  Copyright (C) 2001,02,04  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_IRQ_H__
-#define __V850_IRQ_H__
-
-#include <asm/machdep.h>
-
-/* Default NUM_MACH_IRQS.  */
-#ifndef NUM_MACH_IRQS
-#define NUM_MACH_IRQS	NUM_CPU_IRQS
-#endif
-
-/* NMIs have IRQ numbers from FIRST_NMI to FIRST_NMI+NUM_NMIS-1.  */
-#define FIRST_NMI	NUM_MACH_IRQS
-#define IRQ_NMI(n)	(FIRST_NMI + (n))
-/* v850 processors have 3 non-maskable interrupts.  */
-#define NUM_NMIS	3
-
-/* Includes both maskable and non-maskable irqs.  */
-#define NR_IRQS		(NUM_MACH_IRQS + NUM_NMIS)
-
-
-#ifndef __ASSEMBLY__
-
-struct pt_regs;
-struct hw_interrupt_type;
-struct irqaction;
-
-#define irq_canonicalize(irq)	(irq)
-
-/* Initialize irq handling for IRQs.
-   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
-   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
-extern void
-init_irq_handlers (int base_irq, int num, int interval,
-		   struct hw_interrupt_type *irq_type);
-
-/* Handle interrupt IRQ.  REGS are the registers at the time of ther
-   interrupt.  */
-extern unsigned int handle_irq (int irq, struct pt_regs *regs);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __V850_IRQ_H__ */
diff --git a/include/asm-v850/irq_regs.h b/include/asm-v850/irq_regs.h
deleted file mode 100644
index 3dd9c0b7027..00000000000
--- a/include/asm-v850/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-v850/kdebug.h b/include/asm-v850/kdebug.h
deleted file mode 100644
index 6ece1b03766..00000000000
--- a/include/asm-v850/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-v850/kmap_types.h b/include/asm-v850/kmap_types.h
deleted file mode 100644
index 3288976b161..00000000000
--- a/include/asm-v850/kmap_types.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __V850_KMAP_TYPES_H__
-#define __V850_KMAP_TYPES_H__
-
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_TYPE_NR
-};
-
-#endif /* __V850_KMAP_TYPES_H__ */
diff --git a/include/asm-v850/kvm.h b/include/asm-v850/kvm.h
deleted file mode 100644
index 3f729b79feb..00000000000
--- a/include/asm-v850/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_V850_H
-#define __LINUX_KVM_V850_H
-
-/* v850 does not support KVM */
-
-#endif
diff --git a/include/asm-v850/linkage.h b/include/asm-v850/linkage.h
deleted file mode 100644
index b6185d3cfe6..00000000000
--- a/include/asm-v850/linkage.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#ifdef __ASSEMBLY__
-#include <asm/asm.h>
-#endif
-
-#endif
diff --git a/include/asm-v850/local.h b/include/asm-v850/local.h
deleted file mode 100644
index 705148abe27..00000000000
--- a/include/asm-v850/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_LOCAL_H__
-#define __V850_LOCAL_H__
-
-#include <asm-generic/local.h>
-
-#endif /* __V850_LOCAL_H__ */
diff --git a/include/asm-v850/ma.h b/include/asm-v850/ma.h
deleted file mode 100644
index 89e66473a17..00000000000
--- a/include/asm-v850/ma.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * include/asm-v850/ma.h -- V850E/MA series of cpu chips
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MA_H__
-#define __V850_MA_H__
-
-/* The MA series uses the V850E cpu core.  */
-#include <asm/v850e.h>
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  The amount
-   varies between chip models, but there's always at least 4K, and it
-   should always start at FFFFC000.  */
-#define R0_RAM_ADDR			0xFFFFC000
-
-
-/* MA series UART details.  */
-#define V850E_UART_BASE_FREQ		CPU_CLOCK_FREQ
-
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	ma_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void ma_uart_pre_configure (unsigned chan,
-				   unsigned cflags, unsigned baud);
-#endif
-
-
-/* MA series timer C details.  */
-#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
-
-
-/* MA series timer D details.  */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ		CPU_CLOCK_FREQ
-
-
-/* Port 0 */
-/* Direct I/O.  Bits 0-7 are pins P00-P07.  */
-#define MA_PORT0_IO_ADDR		0xFFFFF400
-#define MA_PORT0_IO			(*(volatile u8 *)MA_PORT0_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define MA_PORT0_PM_ADDR		0xFFFFF420
-#define MA_PORT0_PM			(*(volatile u8 *)MA_PORT0_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define MA_PORT0_PMC_ADDR		0xFFFFF440
-#define MA_PORT0_PMC			(*(volatile u8 *)MA_PORT0_PMC_ADDR)
-/* Port function control (for P04-P07, 0 = IRQ, 1 = DMARQ).  */
-#define MA_PORT0_PFC_ADDR		0xFFFFF460
-#define MA_PORT0_PFC			(*(volatile u8 *)MA_PORT0_PFC_ADDR)
-
-/* Port 1 */
-/* Direct I/O.  Bits 0-3 are pins P10-P13.  */
-#define MA_PORT1_IO_ADDR		0xFFFFF402
-#define MA_PORT1_IO			(*(volatile u8 *)MA_PORT1_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define MA_PORT1_PM_ADDR		0xFFFFF420
-#define MA_PORT1_PM			(*(volatile u8 *)MA_PORT1_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define MA_PORT1_PMC_ADDR		0xFFFFF442
-#define MA_PORT1_PMC			(*(volatile u8 *)MA_PORT1_PMC_ADDR)
-
-/* Port 4 */
-/* Direct I/O.  Bits 0-5 are pins P40-P45.  */
-#define MA_PORT4_IO_ADDR		0xFFFFF408
-#define MA_PORT4_IO			(*(volatile u8 *)MA_PORT4_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define MA_PORT4_PM_ADDR		0xFFFFF428
-#define MA_PORT4_PM			(*(volatile u8 *)MA_PORT4_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define MA_PORT4_PMC_ADDR		0xFFFFF448
-#define MA_PORT4_PMC			(*(volatile u8 *)MA_PORT4_PMC_ADDR)
-/* Port function control (for serial interfaces, 0 = CSI, 1 = UART).  */
-#define MA_PORT4_PFC_ADDR		0xFFFFF468
-#define MA_PORT4_PFC			(*(volatile u8 *)MA_PORT4_PFC_ADDR)
-
-
-#ifndef __ASSEMBLY__
-
-/* Initialize MA chip interrupts.  */
-extern void ma_init_irqs (void);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_MA_H__ */
diff --git a/include/asm-v850/ma1.h b/include/asm-v850/ma1.h
deleted file mode 100644
index ede1f1de2b7..00000000000
--- a/include/asm-v850/ma1.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-v850/ma1.h -- V850E/MA1 cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MA1_H__
-#define __V850_MA1_H__
-
-/* Inherit more generic details from MA series.  */
-#include <asm/ma.h>
-
-
-#define CPU_MODEL	"v850e/ma1"
-#define CPU_MODEL_LONG	"NEC V850E/MA1"
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
-#define IRQ_INTOV(n)	(n)	/* 0-3 */
-#define IRQ_INTOV_NUM	4
-#define IRQ_INTP(n)	(0x4  + (n)) /* Pnnn (pin) interrupts */
-#define IRQ_INTP_NUM	24
-#define IRQ_INTCMD(n)	(0x1c + (n)) /* interval timer interrupts 0-3 */
-#define IRQ_INTCMD_NUM	4
-#define IRQ_INTDMA(n)	(0x20 + (n)) /* DMA interrupts 0-3 */
-#define IRQ_INTDMA_NUM	4
-#define IRQ_INTCSI(n)	(0x24 + (n)*4)/* CSI 0-2 transmit/receive completion */
-#define IRQ_INTCSI_NUM	3
-#define IRQ_INTSER(n)	(0x25 + (n)*4) /* UART 0-2 reception error */
-#define IRQ_INTSER_NUM	3
-#define IRQ_INTSR(n)	(0x26 + (n)*4) /* UART 0-2 reception completion */
-#define IRQ_INTSR_NUM	3
-#define IRQ_INTST(n)	(0x27 + (n)*4) /* UART 0-2 transmission completion */
-#define IRQ_INTST_NUM	3
-
-#define NUM_CPU_IRQS	0x30
-
-
-/* The MA1 has a UART with 3 channels.  */
-#define V850E_UART_NUM_CHANNELS	3
-
-
-#endif /* __V850_MA1_H__ */
diff --git a/include/asm-v850/machdep.h b/include/asm-v850/machdep.h
deleted file mode 100644
index f1e3b8b9150..00000000000
--- a/include/asm-v850/machdep.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-v850/machdep.h -- Machine-dependent definitions
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MACHDEP_H__
-#define __V850_MACHDEP_H__
-
-
-/* chips */
-#ifdef CONFIG_V850E_MA1
-#include <asm/ma1.h>
-#endif
-#ifdef CONFIG_V850E_ME2
-#include <asm/me2.h>
-#endif
-#ifdef CONFIG_V850E_TEG
-#include <asm/teg.h>
-#endif
-
-/* These are both chips _and_ platforms, so put them in the middle... */
-#ifdef CONFIG_V850E2_ANNA
-#include <asm/anna.h>
-#endif
-#ifdef CONFIG_V850E_AS85EP1
-#include <asm/as85ep1.h>
-#endif
-
-/* platforms */
-#ifdef CONFIG_RTE_CB_MA1
-#include <asm/rte_ma1_cb.h>
-#endif
-#ifdef CONFIG_RTE_CB_ME2
-#include <asm/rte_me2_cb.h>
-#endif
-#ifdef CONFIG_RTE_CB_NB85E
-#include <asm/rte_nb85e_cb.h>
-#endif
-#ifdef CONFIG_V850E_SIM
-#include <asm/sim.h>
-#endif
-#ifdef CONFIG_V850E2_SIM85E2C
-#include <asm/sim85e2c.h>
-#endif
-#ifdef CONFIG_V850E2_SIM85E2S
-#include <asm/sim85e2s.h>
-#endif
-#ifdef CONFIG_V850E2_FPGA85E2C
-#include <asm/fpga85e2c.h>
-#endif
-
-#endif /* __V850_MACHDEP_H__ */
diff --git a/include/asm-v850/macrology.h b/include/asm-v850/macrology.h
deleted file mode 100644
index 37abf874832..00000000000
--- a/include/asm-v850/macrology.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-v850/macrology.h -- Various useful CPP macros
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#define macrology_paste(arg1, arg2)	macrology_paste_1(arg1, arg2)
-#define macrology_paste_1(arg1, arg2)	arg1 ## arg2
-#define macrology_stringify(sym)	macrology_stringify_1(sym)
-#define macrology_stringify_1(sym)	#sym
diff --git a/include/asm-v850/me2.h b/include/asm-v850/me2.h
deleted file mode 100644
index ac7c9ce0bdc..00000000000
--- a/include/asm-v850/me2.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * include/asm-v850/me2.h -- V850E/ME2 cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ME2_H__
-#define __V850_ME2_H__
-
-#include <asm/v850e.h>
-#include <asm/v850e_cache.h>
-
-
-#define CPU_MODEL	"v850e/me2"
-#define CPU_MODEL_LONG	"NEC V850E/ME2"
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
-#define IRQ_INTP(n)       (n) /* Pnnn (pin) interrupts */
-#define IRQ_INTP_NUM      31
-#define IRQ_INTCMD(n)     (0x31 + (n)) /* interval timer interrupts 0-3 */
-#define IRQ_INTCMD_NUM    4
-#define IRQ_INTDMA(n)     (0x41 + (n)) /* DMA interrupts 0-3 */
-#define IRQ_INTDMA_NUM    4
-#define IRQ_INTUBTIRE(n)  (0x49 + (n)*5)/* UARTB 0-1 reception error */
-#define IRQ_INTUBTIRE_NUM 2
-#define IRQ_INTUBTIR(n)   (0x4a + (n)*5) /* UARTB 0-1 reception complete */
-#define IRQ_INTUBTIR_NUM  2
-#define IRQ_INTUBTIT(n)   (0x4b + (n)*5) /* UARTB 0-1 transmission complete */
-#define IRQ_INTUBTIT_NUM  2
-#define IRQ_INTUBTIF(n)   (0x4c + (n)*5) /* UARTB 0-1 FIFO trans. complete */
-#define IRQ_INTUBTIF_NUM  2
-#define IRQ_INTUBTITO(n)  (0x4d + (n)*5) /* UARTB 0-1 reception timeout */
-#define IRQ_INTUBTITO_NUM 2
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS		0x59 /* V850E/ME2 */
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  */
-#define R0_RAM_ADDR			0xFFFFB000 /* V850E/ME2 */
-
-
-/* V850E/ME2 UARTB details.*/
-#define V850E_UART_NUM_CHANNELS		2
-#define V850E_UARTB_BASE_FREQ		(CPU_CLOCK_FREQ / 4)
-
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	me2_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void me2_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud);
-#endif /* __ASSEMBLY__ */
-
-
-/* V850E/ME2 timer C details.  */
-#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
-
-
-/* V850E/ME2 timer D details.  */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ		(CPU_CLOCK_FREQ / 2)
-
-
-/* Select iRAM mode.  */
-#define ME2_IRAMM_ADDR			0xFFFFF80A
-#define ME2_IRAMM			(*(volatile u8*)ME2_IRAMM_ADDR)
-
-
-/* Interrupt edge-detection configuration.  INTF(n) and INTR(n) are only
-   valid for n == 1, 2, or 5.  */
-#define ME2_INTF_ADDR(n)		(0xFFFFFC00 + (n) * 0x2)
-#define ME2_INTF(n)			(*(volatile u8*)ME2_INTF_ADDR(n))
-#define ME2_INTR_ADDR(n)		(0xFFFFFC20 + (n) * 0x2)
-#define ME2_INTR(n)			(*(volatile u8*)ME2_INTR_ADDR(n))
-#define ME2_INTFAL_ADDR			0xFFFFFC10
-#define ME2_INTFAL			(*(volatile u8*)ME2_INTFAL_ADDR)
-#define ME2_INTRAL_ADDR			0xFFFFFC30
-#define ME2_INTRAL			(*(volatile u8*)ME2_INTRAL_ADDR)
-#define ME2_INTFDH_ADDR			0xFFFFFC16
-#define ME2_INTFDH			(*(volatile u16*)ME2_INTFDH_ADDR)
-#define ME2_INTRDH_ADDR			0xFFFFFC36
-#define ME2_INTRDH			(*(volatile u16*)ME2_INTRDH_ADDR)
-#define ME2_SESC_ADDR(n)		(0xFFFFF609 + (n) * 0x10)
-#define ME2_SESC(n)			(*(volatile u8*)ME2_SESC_ADDR(n))
-#define ME2_SESA10_ADDR			0xFFFFF5AD
-#define ME2_SESA10			(*(volatile u8*)ME2_SESA10_ADDR)
-#define ME2_SESA11_ADDR			0xFFFFF5DD
-#define ME2_SESA11			(*(volatile u8*)ME2_SESA11_ADDR)
-
-
-/* Port 1 */
-/* Direct I/O.  Bits 0-3 are pins P10-P13.  */
-#define ME2_PORT1_IO_ADDR		0xFFFFF402
-#define ME2_PORT1_IO			(*(volatile u8 *)ME2_PORT1_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT1_PM_ADDR		0xFFFFF422
-#define ME2_PORT1_PM			(*(volatile u8 *)ME2_PORT1_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT1_PMC_ADDR		0xFFFFF442
-#define ME2_PORT1_PMC			(*(volatile u8 *)ME2_PORT1_PMC_ADDR)
-/* Port function control (for serial interfaces, 0 = CSI30, 1 = UARTB0 ).  */
-#define ME2_PORT1_PFC_ADDR		0xFFFFF462
-#define ME2_PORT1_PFC			(*(volatile u8 *)ME2_PORT1_PFC_ADDR)
-
-/* Port 2 */
-/* Direct I/O.  Bits 0-3 are pins P20-P25.  */
-#define ME2_PORT2_IO_ADDR		0xFFFFF404
-#define ME2_PORT2_IO			(*(volatile u8 *)ME2_PORT2_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT2_PM_ADDR		0xFFFFF424
-#define ME2_PORT2_PM			(*(volatile u8 *)ME2_PORT2_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT2_PMC_ADDR		0xFFFFF444
-#define ME2_PORT2_PMC			(*(volatile u8 *)ME2_PORT2_PMC_ADDR)
-/* Port function control (for serial interfaces, 0 = INTP2x, 1 = UARTB1 ).  */
-#define ME2_PORT2_PFC_ADDR		0xFFFFF464
-#define ME2_PORT2_PFC			(*(volatile u8 *)ME2_PORT2_PFC_ADDR)
-
-/* Port 5 */
-/* Direct I/O.  Bits 0-5 are pins P50-P55.  */
-#define ME2_PORT5_IO_ADDR		0xFFFFF40A
-#define ME2_PORT5_IO			(*(volatile u8 *)ME2_PORT5_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT5_PM_ADDR		0xFFFFF42A
-#define ME2_PORT5_PM			(*(volatile u8 *)ME2_PORT5_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT5_PMC_ADDR		0xFFFFF44A
-#define ME2_PORT5_PMC			(*(volatile u8 *)ME2_PORT5_PMC_ADDR)
-/* Port function control ().  */
-#define ME2_PORT5_PFC_ADDR		0xFFFFF46A
-#define ME2_PORT5_PFC			(*(volatile u8 *)ME2_PORT5_PFC_ADDR)
-
-/* Port 6 */
-/* Direct I/O.  Bits 5-7 are pins P65-P67.  */
-#define ME2_PORT6_IO_ADDR		0xFFFFF40C
-#define ME2_PORT6_IO			(*(volatile u8 *)ME2_PORT6_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT6_PM_ADDR		0xFFFFF42C
-#define ME2_PORT6_PM			(*(volatile u8 *)ME2_PORT6_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT6_PMC_ADDR		0xFFFFF44C
-#define ME2_PORT6_PMC			(*(volatile u8 *)ME2_PORT6_PMC_ADDR)
-/* Port function control ().  */
-#define ME2_PORT6_PFC_ADDR		0xFFFFF46C
-#define ME2_PORT6_PFC			(*(volatile u8 *)ME2_PORT6_PFC_ADDR)
-
-/* Port 7 */
-/* Direct I/O.  Bits 2-7 are pins P72-P77.  */
-#define ME2_PORT7_IO_ADDR		0xFFFFF40E
-#define ME2_PORT7_IO			(*(volatile u8 *)ME2_PORT7_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT7_PM_ADDR		0xFFFFF42E
-#define ME2_PORT7_PM			(*(volatile u8 *)ME2_PORT7_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT7_PMC_ADDR		0xFFFFF44E
-#define ME2_PORT7_PMC			(*(volatile u8 *)ME2_PORT7_PMC_ADDR)
-/* Port function control ().  */
-#define ME2_PORT7_PFC_ADDR		0xFFFFF46E
-#define ME2_PORT7_PFC			(*(volatile u8 *)ME2_PORT7_PFC_ADDR)
-
-
-#ifndef __ASSEMBLY__
-/* Initialize V850E/ME2 chip interrupts.  */
-extern void me2_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_ME2_H__ */
diff --git a/include/asm-v850/mman.h b/include/asm-v850/mman.h
deleted file mode 100644
index edbf6edbfb3..00000000000
--- a/include/asm-v850/mman.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __V850_MMAN_H__
-#define __V850_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __V850_MMAN_H__ */
diff --git a/include/asm-v850/mmu.h b/include/asm-v850/mmu.h
deleted file mode 100644
index 267768c66ef..00000000000
--- a/include/asm-v850/mmu.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* Copyright (C) 2002, 2005, David McCullough <davidm@snapgear.com> */
-
-#ifndef __V850_MMU_H__
-#define __V850_MMU_H__
-
-typedef struct {
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-} mm_context_t;
-
-#endif /* __V850_MMU_H__ */
diff --git a/include/asm-v850/mmu_context.h b/include/asm-v850/mmu_context.h
deleted file mode 100644
index 01daacd5474..00000000000
--- a/include/asm-v850/mmu_context.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __V850_MMU_CONTEXT_H__
-#define __V850_MMU_CONTEXT_H__
-
-#include <asm-generic/mm_hooks.h>
-
-#define destroy_context(mm)		((void)0)
-#define init_new_context(tsk,mm)	0
-#define switch_mm(prev,next,tsk)	((void)0)
-#define deactivate_mm(tsk,mm)		do { } while (0)
-#define activate_mm(prev,next)		((void)0)
-#define enter_lazy_tlb(mm,tsk)		((void)0)
-
-#endif /* __V850_MMU_CONTEXT_H__ */
diff --git a/include/asm-v850/module.h b/include/asm-v850/module.h
deleted file mode 100644
index 2c2f4944f09..00000000000
--- a/include/asm-v850/module.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/module.h -- Architecture-specific module hooks
- *
- *  Copyright (C) 2001,02,03,04  NEC Corporation
- *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
- *  Copyright (C) 2001,03  Rusty Russell
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- *
- * Derived in part from include/asm-ppc/module.h
- */
-
-#ifndef __V850_MODULE_H__
-#define __V850_MODULE_H__
-
-#define MODULE_SYMBOL_PREFIX "_"
-
-struct v850_plt_entry
-{
-	/* Indirect jump instruction sequence (6-byte mov + 2-byte jr).  */
-	unsigned long tramp[2];
-};
-
-struct mod_arch_specific
-{
-	/* Indices of PLT sections within module. */
-	unsigned int core_plt_section, init_plt_section;
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-/* Make empty sections for module_frob_arch_sections to expand. */
-#ifdef MODULE
-asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
-asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
-#endif
-
-/* We don't do exception tables.  */
-struct exception_table_entry;
-static inline const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
-	       const struct exception_table_entry *last,
-	       unsigned long value)
-{
-	return 0;
-}
-#define ARCH_HAS_SEARCH_EXTABLE
-static inline void
-sort_extable(struct exception_table_entry *start,
-	     struct exception_table_entry *finish)
-{
-	/* nada */
-}
-#define ARCH_HAS_SORT_EXTABLE
-
-#endif /* __V850_MODULE_H__ */
diff --git a/include/asm-v850/msgbuf.h b/include/asm-v850/msgbuf.h
deleted file mode 100644
index ed07dbd0163..00000000000
--- a/include/asm-v850/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __V850_MSGBUF_H__
-#define __V850_MSGBUF_H__
-
-/* 
- * The msqid64_ds structure for v850 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* __V850_MSGBUF_H__ */
diff --git a/include/asm-v850/mutex.h b/include/asm-v850/mutex.h
deleted file mode 100644
index 458c1f7fbc1..00000000000
--- a/include/asm-v850/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-v850/page.h b/include/asm-v850/page.h
deleted file mode 100644
index f9de35d873f..00000000000
--- a/include/asm-v850/page.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * include/asm-v850/page.h -- VM ops
- *
- *  Copyright (C) 2001,02,03,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PAGE_H__
-#define __V850_PAGE_H__
-
-#include <asm/machdep.h>
-
-
-#define PAGE_SHIFT	12
-#define PAGE_SIZE       (1UL << PAGE_SHIFT)
-#define PAGE_MASK       (~(PAGE_SIZE-1))
-
-
-/*
- * PAGE_OFFSET -- the first address of the first page of memory. For archs with
- * no MMU this corresponds to the first free page in physical memory (aligned
- * on a page boundary).
- */
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET  0x0000000
-#endif
-
-
-#ifndef __ASSEMBLY__
-
-#define STRICT_MM_TYPECHECKS
-
-#define clear_page(page)	memset ((void *)(page), 0, PAGE_SIZE)
-#define copy_page(to, from)	memcpy ((void *)(to), (void *)from, PAGE_SIZE)
-
-#define clear_user_page(addr, vaddr, page)	\
-	do { 	clear_page(addr);		\
-		flush_dcache_page(page);	\
-	} while (0)
-#define copy_user_page(to, from, vaddr, page)	\
-	do {	copy_page(to, from);		\
-		flush_dcache_page(page);	\
-	} while (0)
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x)      ((x).pte)
-#define pmd_val(x)      ((x).pmd)
-#define pgd_val(x)      ((x).pgd)
-#define pgprot_val(x)   ((x).pgprot)
-
-#define __pte(x)        ((pte_t) { (x) } )
-#define __pmd(x)        ((pmd_t) { (x) } )
-#define __pgd(x)        ((pgd_t) { (x) } )
-#define __pgprot(x)     ((pgprot_t) { (x) } )
-
-#else /* !STRICT_MM_TYPECHECKS */
-/*
- * .. while these make it easier on the compiler
- */
-
-typedef unsigned long pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)      (x)
-#define pmd_val(x)      (x)
-#define pgd_val(x)      (x)
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pmd(x)        (x)
-#define __pgd(x)        (x)
-#define __pgprot(x)     (x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* No current v850 processor has virtual memory.  */
-#define __virt_to_phys(addr)	(addr)
-#define __phys_to_virt(addr)	(addr)
-
-#define virt_to_pfn(kaddr)	(__virt_to_phys (kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)	__phys_to_virt ((pfn) << PAGE_SHIFT)
-
-#define MAP_NR(kaddr) \
-  (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT)
-#define virt_to_page(kaddr)	(mem_map + MAP_NR (kaddr))
-#define page_to_virt(page) \
-  ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-
-#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
-#define pfn_valid(pfn)	        ((pfn) < max_mapnr)
-
-#define	virt_addr_valid(kaddr)						\
-  (((void *)(kaddr) >= (void *)PAGE_OFFSET) && MAP_NR (kaddr) < max_mapnr)
-
-
-#define __pa(x)		     __virt_to_phys ((unsigned long)(x))
-#define __va(x)		     ((void *)__phys_to_virt ((unsigned long)(x)))
-
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-#endif /* __V850_PAGE_H__ */
diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h
deleted file mode 100644
index 4391f5fe020..00000000000
--- a/include/asm-v850/param.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-v850/param.h -- Varions kernel parameters
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PARAM_H__
-#define __V850_PARAM_H__
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ
-# define USER_HZ	100
-# define CLOCKS_PER_SEC	USER_HZ
-#else
-# define HZ		100
-#endif
-
-#endif /* __V850_PARAM_H__ */
diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h
deleted file mode 100644
index de2a7d0a81c..00000000000
--- a/include/asm-v850/pci.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * include/asm-v850/pci.h -- PCI support
- *
- *  Copyright (C) 2001,02,05  NEC Corporation
- *  Copyright (C) 2001,02,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PCI_H__
-#define __V850_PCI_H__
-
-/* Get any platform-dependent definitions.  */
-#include <asm/machdep.h>
-
-#define pcibios_scan_all_fns(a, b)	0
-
-/* Generic declarations.  */
-
-struct scatterlist;
-
-extern void pcibios_set_master (struct pci_dev *dev);
-
-/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA.  The
-   32-bit PCI bus mastering address to use is returned.  the device owns
-   this memory until either pci_unmap_single or pci_dma_sync_single_for_cpu is
-   performed.  */
-extern dma_addr_t
-pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir);
-
-/* Return to the CPU the PCI DMA memory block previously `granted' to
-   PDEV, at DMA_ADDR.  */
-extern void
-pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		  int dir);
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-extern void
-pci_dma_sync_single_for_cpu (struct pci_dev *dev, dma_addr_t dma_addr,
-			     size_t size, int dir);
-
-extern void
-pci_dma_sync_single_for_device (struct pci_dev *dev, dma_addr_t dma_addr,
-				size_t size, int dir);
-
-
-/* Do multiple DMA mappings at once.  */
-extern int
-pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir);
-
-/* Unmap multiple DMA mappings at once.  */
-extern void
-pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,
-	      int dir);
-
-/* SG-list versions of pci_dma_sync functions.  */
-extern void
-pci_dma_sync_sg_for_cpu (struct pci_dev *dev,
-			 struct scatterlist *sg, int sg_len,
-			 int dir);
-extern void
-pci_dma_sync_sg_for_device (struct pci_dev *dev,
-			    struct scatterlist *sg, int sg_len,
-			    int dir);
-
-#define pci_map_page(dev, page, offs, size, dir) \
-  pci_map_single(dev, (page_address(page) + (offs)), size, dir)
-#define pci_unmap_page(dev,addr,sz,dir) \
-  pci_unmap_single(dev, addr, sz, dir)
-
-/* Test for pci_map_single or pci_map_page having generated an error.  */
-static inline int
-pci_dma_mapping_error (dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
-}
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDR to the pci side dma address as well,
-   else DMA_ADDR is undefined.  */
-extern void *
-pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr);
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must be
-   the same as what as passed into pci_alloc_consistent.  References to
-   the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past
-   this call are illegal.  */
-extern void
-pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
-		     dma_addr_t dma_addr);
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#endif
-
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-extern void pci_iounmap (struct pci_dev *dev, void __iomem *addr);
-
-#endif /* __V850_PCI_H__ */
diff --git a/include/asm-v850/percpu.h b/include/asm-v850/percpu.h
deleted file mode 100644
index 755ac6522b6..00000000000
--- a/include/asm-v850/percpu.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __V850_PERCPU_H__
-#define __V850_PERCPU_H__
-
-#include <asm-generic/percpu.h>
-
-/* This is a stupid hack to satisfy some grotty implicit include-file
-   dependency; basically, <linux/smp.h> uses BUG_ON, which calls BUG, but
-   doesn't include the necessary headers to define it.  In the twisted
-   festering mess of includes this must all be resolved somehow on other
-   platforms, but I haven't the faintest idea how, and don't care; here will
-   do, even though doesn't actually make any sense.  */
-#include <asm/page.h>
-
-#endif /* __V850_PERCPU_H__ */
diff --git a/include/asm-v850/pgalloc.h b/include/asm-v850/pgalloc.h
deleted file mode 100644
index b91eb2d02bf..00000000000
--- a/include/asm-v850/pgalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-v850/pgalloc.h
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PGALLOC_H__
-#define __V850_PGALLOC_H__
-
-#include <linux/mm.h>  /* some crap code expects this */
-
-/* ... and then, there was one.  */
-#define check_pgt_cache()	((void)0)
-
-#endif /* __V850_PGALLOC_H__ */
diff --git a/include/asm-v850/pgtable.h b/include/asm-v850/pgtable.h
deleted file mode 100644
index 1ea2a900f0f..00000000000
--- a/include/asm-v850/pgtable.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __V850_PGTABLE_H__
-#define __V850_PGTABLE_H__
-
-#include <asm-generic/4level-fixup.h>
-
-#include <asm/page.h>
-
-
-#define pgd_present(pgd)	(1) /* pages are always present on NO_MM */
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)		((void)0)
-
-#define	pmd_offset(a, b)	((void *)0)
-
-#define kern_addr_valid(addr)	(1)
-
-
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-static inline int pte_file (pte_t pte) { return 0; }
-
-
-/* These mean nothing to !CONFIG_MMU.  */
-#define PAGE_NONE		__pgprot(0)
-#define PAGE_SHARED		__pgprot(0)
-#define PAGE_COPY		__pgprot(0)
-#define PAGE_READONLY		__pgprot(0)
-#define PAGE_KERNEL		__pgprot(0)
-
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc.  When CONFIG_MMU is not defined, this
- * should never actually be used, so just define it to something that's
- * will hopefully cause a bus error if it is.
- */
-#define ZERO_PAGE(vaddr)	((void *)0x87654321)
-
-
-/* Some bogus code in procfs uses these; whatever.  */
-#define VMALLOC_START	0
-#define VMALLOC_END	(~0)
-
-
-extern void paging_init (void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define pgtable_cache_init()   ((void)0)
-
-
-extern unsigned int kobjsize(const void *objp);
-
-
-#endif /* __V850_PGTABLE_H__ */
diff --git a/include/asm-v850/poll.h b/include/asm-v850/poll.h
deleted file mode 100644
index 803cad0b9b5..00000000000
--- a/include/asm-v850/poll.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __V850_POLL_H__
-#define __V850_POLL_H__
-
-#define POLLWRNORM	POLLOUT
-#define POLLWRBAND	0x0100
-
-#include <asm-generic/poll.h>
-
-#endif /* __V850_POLL_H__ */
diff --git a/include/asm-v850/posix_types.h b/include/asm-v850/posix_types.h
deleted file mode 100644
index 7f403b76539..00000000000
--- a/include/asm-v850/posix_types.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * include/asm-v850/posix_types.h -- Kernel versions of standard types
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_POSIX_TYPES_H__
-#define __V850_POSIX_TYPES_H__
-
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned long long __kernel_ino64_t;
-typedef unsigned int	__kernel_mode_t;
-typedef unsigned int	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef long long	__kernel_loff_t;
-typedef int		__kernel_pid_t;
-typedef unsigned short	__kernel_ipc_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef unsigned int	__kernel_size_t;
-typedef int		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-/* Some bogus code depends on this; we don't care.  */
-typedef __kernel_uid_t __kernel_old_uid_t;
-typedef unsigned int	__kernel_old_dev_t;
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-
-#if defined(__KERNEL__)
-
-/* We used to include <asm/bitops.h> here, which seems the right thing, but
-   it caused nasty include-file definition order problems.  Removing the
-   include seems to work, so fingers crossed...  */
-
-#undef	__FD_SET
-#define __FD_SET(fd, fd_set) \
-  __set_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
-#undef __FD_CLR
-#define __FD_CLR(fd, fd_set) \
-  __clear_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
-#undef	__FD_ISSET
-#define __FD_ISSET(fd, fd_set) \
-  __test_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
-#undef	__FD_ZERO
-#define __FD_ZERO(fd_set) \
-  memset (fd_set, 0, sizeof (*(fd_set *)fd_set))
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* __V850_POSIX_TYPES_H__ */
diff --git a/include/asm-v850/processor.h b/include/asm-v850/processor.h
deleted file mode 100644
index 979e3467f9a..00000000000
--- a/include/asm-v850/processor.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * include/asm-v850/processor.h
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PROCESSOR_H__
-#define __V850_PROCESSOR_H__
-
-#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe.  */
-#include <linux/thread_info.h>
-#endif
-
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/entry.h>
-
-/* Some code expects `segment' stuff to be defined here.  */
-#include <asm/segment.h>
-
-
-/*
- * The only places this is used seem to be horrible bletcherous kludges,
- * so we just define it to be as large as possible.
- */
-#define TASK_SIZE	(0xFFFFFFFF)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.  We won't be using it.
- */
-#define TASK_UNMAPPED_BASE	0
-
-
-#ifndef __ASSEMBLY__
-
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr()	({ __label__ _l; _l: &&_l;})
-
-/* If you change this, you must change the associated assembly-languages
-   constants defined below, THREAD_*.  */
-struct thread_struct {
-	/* kernel stack pointer (must be first field in structure) */
-	unsigned long  ksp;
-};
-
-#define INIT_THREAD { sizeof init_stack + (unsigned long)init_stack }
-
-
-/* Do necessary setup to start up a newly executed thread.  */
-static inline void start_thread (struct pt_regs *regs,
-				 unsigned long pc, unsigned long usp)
-{
-	regs->pc = pc;
-	regs->gpr[GPR_SP] = usp;
-	regs->kernel_mode = 0;
-}
-
-/* Free all resources held by a thread. */
-static inline void release_thread (struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread (int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Free current thread data structures etc.  */
-static inline void exit_thread (void)
-{
-}
-
-
-/* Return the registers saved during context-switch by the currently
-   not-running thread T.  Note that this only includes some registers!
-   See entry.S for details.  */
-#define thread_saved_regs(t) \
-   ((struct pt_regs*)((t)->thread.ksp + STATE_SAVE_PT_OFFSET))
-/* Return saved (kernel) PC of a blocked thread.  Actually, we return the
-   LP register, because the thread is actually blocked in switch_thread,
-   and we're interested in the PC it will _return_ to.  */
-#define thread_saved_pc(t)   (thread_saved_regs(t)->gpr[GPR_LP])
-
-
-unsigned long get_wchan (struct task_struct *p);
-
-
-/* Return some info about the user process TASK.  */
-#define task_tos(task)	((unsigned long)task_stack_page(task) + THREAD_SIZE)
-#define task_pt_regs(task) ((struct pt_regs *)task_tos (task) - 1)
-#define task_sp(task)	(task_pt_regs (task)->gpr[GPR_SP])
-#define task_pc(task)	(task_pt_regs (task)->pc)
-/* Grotty old names for some.  */
-#define KSTK_EIP(task)	task_pc (task)
-#define KSTK_ESP(task)	task_sp (task)
-
-
-#define cpu_relax()    barrier()
-
-
-#else /* __ASSEMBLY__ */
-
-#define THREAD_KSP	0
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_PROCESSOR_H__ */
diff --git a/include/asm-v850/ptrace.h b/include/asm-v850/ptrace.h
deleted file mode 100644
index 4f35cf2cd64..00000000000
--- a/include/asm-v850/ptrace.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-v850/ptrace.h -- Access to CPU registers
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PTRACE_H__
-#define __V850_PTRACE_H__
-
-
-/* v850 general purpose registers with special meanings.  */
-#define GPR_ZERO	0	/* constant zero */
-#define GPR_ASM		1	/* reserved for assembler */
-#define GPR_SP		3	/* stack pointer */
-#define GPR_GP		4	/* global data pointer */
-#define GPR_TP		5	/* `text pointer' */
-#define GPR_EP		30	/* `element pointer' */
-#define GPR_LP		31	/* link pointer (current return address) */
-
-/* These aren't official names, but they make some code more descriptive.  */
-#define GPR_ARG0	6
-#define GPR_ARG1	7
-#define GPR_ARG2	8
-#define GPR_ARG3	9
-#define GPR_RVAL0	10
-#define GPR_RVAL1	11
-#define GPR_RVAL	GPR_RVAL0
-
-#define NUM_GPRS	32
-
-/* v850 `system' registers.  */
-#define SR_EIPC		0
-#define SR_EIPSW	1
-#define SR_FEPC		2
-#define SR_FEPSW	3
-#define SR_ECR		4
-#define SR_PSW		5
-#define SR_CTPC		16
-#define SR_CTPSW	17
-#define SR_DBPC		18
-#define SR_DBPSW	19
-#define SR_CTBP		20
-#define SR_DIR		21
-#define SR_ASID		23
-
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long v850_reg_t;
-
-/* How processor state is stored on the stack during a syscall/signal.
-   If you change this structure, change the associated assembly-language
-   macros below too (PT_*)!  */
-struct pt_regs
-{
-	/* General purpose registers.  */
-	v850_reg_t gpr[NUM_GPRS];
-
-	v850_reg_t pc;		/* program counter */
-	v850_reg_t psw;		/* program status word */
-
-	/* Registers used by `callt' instruction:  */
-	v850_reg_t ctpc;	/* saved program counter */
-	v850_reg_t ctpsw;	/* saved psw */
-	v850_reg_t ctbp;	/* base pointer for callt table */
-
-	char kernel_mode;	/* 1 if in `kernel mode', 0 if user mode */
-};
-
-
-#define instruction_pointer(regs)	((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-#define user_mode(regs)			(!(regs)->kernel_mode)
-
-/* When a struct pt_regs is used to save user state for a system call in
-   the kernel, the system call is stored in the space for R0 (since it's
-   never used otherwise, R0 being a constant 0).  Non-system-calls
-   simply store 0 there.  */
-#define PT_REGS_SYSCALL(regs)		(regs)->gpr[0]
-#define PT_REGS_SET_SYSCALL(regs, val)	((regs)->gpr[0] = (val))
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* The number of bytes used to store each register.  */
-#define _PT_REG_SIZE	4
-
-/* Offset of a general purpose register in a struct pt_regs.  */
-#define PT_GPR(num)	((num) * _PT_REG_SIZE)
-
-/* Offsets of various special registers & fields in a struct pt_regs.  */
-#define PT_PC		((NUM_GPRS + 0) * _PT_REG_SIZE)
-#define PT_PSW		((NUM_GPRS + 1) * _PT_REG_SIZE)
-#define PT_CTPC		((NUM_GPRS + 2) * _PT_REG_SIZE)
-#define PT_CTPSW	((NUM_GPRS + 3) * _PT_REG_SIZE)
-#define PT_CTBP		((NUM_GPRS + 4) * _PT_REG_SIZE)
-#define PT_KERNEL_MODE	((NUM_GPRS + 5) * _PT_REG_SIZE)
-
-/* Where the current syscall number is stashed; obviously only valid in
-   the kernel!  */
-#define PT_CUR_SYSCALL	PT_GPR(0)
-
-/* Size of struct pt_regs, including alignment.  */
-#define PT_SIZE		((NUM_GPRS + 6) * _PT_REG_SIZE)
-
-
-/* These are `magic' values for PTRACE_PEEKUSR that return info about where
-   a process is located in memory.  */
-#define PT_TEXT_ADDR	(PT_SIZE + 1)
-#define PT_TEXT_LEN	(PT_SIZE + 2)
-#define PT_DATA_ADDR	(PT_SIZE + 3)
-
-
-#endif /* __V850_PTRACE_H__ */
diff --git a/include/asm-v850/resource.h b/include/asm-v850/resource.h
deleted file mode 100644
index 4b9dcd44f8d..00000000000
--- a/include/asm-v850/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_RESOURCE_H__
-#define __V850_RESOURCE_H__
-
-#include <asm-generic/resource.h>
-
-#endif /* __V850_RESOURCE_H__ */
diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h
deleted file mode 100644
index db9879f00aa..00000000000
--- a/include/asm-v850/rte_cb.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-v850/rte_cb.h -- Midas labs RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_CB_H__
-#define __V850_RTE_CB_H__
-
-
-/* The SRAM on the Mother-A motherboard.  */
-#define MB_A_SRAM_ADDR		GCS0_ADDR
-#define MB_A_SRAM_SIZE		0x00200000 /* 2MB */
-
-
-#ifdef CONFIG_RTE_GBUS_INT
-/* GBUS interrupt support.  */
-
-# include <asm/gbus_int.h>
-
-# define GBUS_INT_BASE_IRQ	NUM_RTE_CB_IRQS
-# define GBUS_INT_BASE_ADDR	(GCS2_ADDR + 0x00006000)
-
-/* Some specific interrupts.  */
-# define IRQ_MB_A_LAN		IRQ_GBUS_INT(10)
-# define IRQ_MB_A_PCI1(n)	(IRQ_GBUS_INT(16) + (n))
-# define IRQ_MB_A_PCI1_NUM	4
-# define IRQ_MB_A_PCI2(n)	(IRQ_GBUS_INT(20) + (n))
-# define IRQ_MB_A_PCI2_NUM	4
-# define IRQ_MB_A_EXT(n)	(IRQ_GBUS_INT(24) + (n))
-# define IRQ_MB_A_EXT_NUM	4
-# define IRQ_MB_A_USB_OC(n)	(IRQ_GBUS_INT(28) + (n))
-# define IRQ_MB_A_USB_OC_NUM	2
-# define IRQ_MB_A_PCMCIA_OC	IRQ_GBUS_INT(30)
-
-/* We define NUM_MACH_IRQS to include extra interrupts from the GBUS.  */
-# define NUM_MACH_IRQS		(NUM_RTE_CB_IRQS + IRQ_GBUS_INT_NUM)
-
-#else /* !CONFIG_RTE_GBUS_INT */
-
-# define NUM_MACH_IRQS		NUM_RTE_CB_IRQS
-
-#endif /* CONFIG_RTE_GBUS_INT */
-
-
-#ifdef CONFIG_RTE_MB_A_PCI
-/* Mother-A PCI bus support.  */
-
-# include <asm/rte_mb_a_pci.h>
-
-/* These are the base addresses used for allocating device address
-   space.  512K of the motherboard SRAM is in the same space, so we have
-   to be careful not to let it be allocated.  */
-# define PCIBIOS_MIN_MEM	(MB_A_PCI_MEM_ADDR + 0x80000)
-# define PCIBIOS_MIN_IO		MB_A_PCI_IO_ADDR
-
-/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers
-   instead, perversely enough, this becomes always true! */
-# define pci_dma_supported(dev, mask)		1
-# define pcibios_assign_all_busses()		1
-
-#endif /* CONFIG_RTE_MB_A_PCI */
-
-
-#ifndef __ASSEMBLY__
-extern void rte_cb_early_init (void);
-extern void rte_cb_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_RTE_CB_H__ */
diff --git a/include/asm-v850/rte_ma1_cb.h b/include/asm-v850/rte_ma1_cb.h
deleted file mode 100644
index bd3162ab984..00000000000
--- a/include/asm-v850/rte_ma1_cb.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * include/asm-v850/rte_ma1_cb.h -- Midas labs RTE-V850/MA1-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_MA1_CB_H__
-#define __V850_RTE_MA1_CB_H__
-
-#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
-
-
-#define PLATFORM		"rte-v850e/ma1-cb"
-#define PLATFORM_LONG		"Midas lab RTE-V850E/MA1-CB"
-
-#define CPU_CLOCK_FREQ		50000000 /* 50MHz */
-
-/* 1MB of onboard SRAM.  Note that the monitor ROM uses parts of this
-   for its own purposes, so care must be taken.  Some address lines are
-   not decoded, so the SRAM area is mirrored every 1MB from 0x400000 to
-   0x800000 (exclusive).  */
-#define SRAM_ADDR		0x00400000
-#define SRAM_SIZE		0x00100000 /* 1MB */
-
-/* 32MB of onbard SDRAM.  */
-#define SDRAM_ADDR		0x00800000
-#define SDRAM_SIZE		0x02000000 /* 32MB */
-
-
-/* CPU addresses of GBUS memory spaces.  */
-#define GCS0_ADDR		0x05000000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE		0x00200000 /*   2MB */
-#define GCS1_ADDR		0x06000000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE		0x00800000 /*   8MB */
-#define GCS2_ADDR		0x07900000 /* GCS2 - I/O registers */
-#define GCS2_SIZE		0x00400000 /*   4MB */
-#define GCS5_ADDR		0x04000000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE		0x01000000 /*   16MB */
-#define GCS6_ADDR		0x07980000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE		0x00000200 /*   512B */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 		SRAM_ADDR
-
-
-/* The GBUS GINT0 - GINT3 interrupts are connected to the INTP000 - INTP011
-   pins on the CPU.  These are shared among the GBUS interrupts.  */
-#define IRQ_GINT(n)		IRQ_INTP(n)
-#define IRQ_GINT_NUM		4
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
-#define NUM_RTE_CB_IRQS		NUM_CPU_IRQS
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0.  */
-
-#define INTV_BASE		0
-
-#else /* !CONFIG_ROM_KERNEL */
-
-#ifdef CONFIG_RTE_CB_MULTI
-/* Using RAM kernel with ROM monitor for Multi debugger.  */
-
-/* The chip's real interrupt vectors are in ROM, but they jump to a
-   secondary interrupt vector table in RAM.  */
-#define INTV_BASE		0x004F8000
-
-/* Scratch memory used by the ROM monitor, which shouldn't be used by
-   linux (except for the alternate interrupt vector area, defined
-   above).  */
-#define MON_SCRATCH_ADDR	0x004F8000
-#define MON_SCRATCH_SIZE	0x00008000 /* 32KB */
-
-#else /* !CONFIG_RTE_CB_MULTI */
-/* Using RAM-kernel.  Assume some sort of boot-loader got us loaded at
-   address 0.  */
-
-#define INTV_BASE		0
-
-#endif /* CONFIG_RTE_CB_MULTI */
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices.  */
-
-/* Seven-segment LED display (two digits).  Write-only.  */
-#define LED_ADDR(n)		(0x07802000 + (n))
-#define LED(n)			(*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS		2
-
-
-/* Override the basic MA uart pre-initialization so that we can
-   initialize extra stuff.  */
-#undef V850E_UART_PRE_CONFIGURE	/* should be defined by <asm/ma.h> */
-#define V850E_UART_PRE_CONFIGURE	rte_ma1_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_ma1_cb_uart_pre_configure (unsigned chan,
-					   unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
-
-/* CTS for UART channel 0 is pin P43 (bit 3 of port 4).  */
-#define V850E_UART_CTS(chan)	((chan) == 0 ? !(MA_PORT4_IO & 0x8) : 1)
-/* RTS for UART channel 0 is pin P42 (bit 2 of port 4).  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   if (chan == 0) {						      \
-		   unsigned old = MA_PORT4_IO; 				      \
-		   if (val)						      \
-			   MA_PORT4_IO = old & ~0x4;			      \
-		   else							      \
-			   MA_PORT4_IO = old | 0x4;			      \
-	   }								      \
-   } while (0)
-
-
-#endif /* __V850_RTE_MA1_CB_H__ */
diff --git a/include/asm-v850/rte_mb_a_pci.h b/include/asm-v850/rte_mb_a_pci.h
deleted file mode 100644
index 41ac185ca9c..00000000000
--- a/include/asm-v850/rte_mb_a_pci.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-v850/mb_a_pci.h -- PCI support for Midas lab RTE-MOTHER-A board
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MB_A_PCI_H__
-#define __V850_MB_A_PCI_H__
-
-
-#define MB_A_PCI_MEM_ADDR	GCS5_ADDR
-#define MB_A_PCI_MEM_SIZE	(GCS5_SIZE / 2)
-#define MB_A_PCI_IO_ADDR	(GCS5_ADDR + MB_A_PCI_MEM_SIZE)
-#define MB_A_PCI_IO_SIZE	(GCS5_SIZE / 2)
-#define MB_A_PCI_REG_BASE_ADDR	GCS6_ADDR
-
-#define MB_A_PCI_PCICR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x4)
-#define MB_A_PCI_PCICR		(*(volatile u16 *)MB_A_PCI_PCICR_ADDR)
-#define MB_A_PCI_PCISR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x6)
-#define MB_A_PCI_PCISR		(*(volatile u16 *)MB_A_PCI_PCISR_ADDR)
-#define MB_A_PCI_PCILTR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xD)
-#define MB_A_PCI_PCILTR		(*(volatile u8 *)MB_A_PCI_PCILTR_ADDR)
-#define MB_A_PCI_PCIBAR0_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x10)
-#define MB_A_PCI_PCIBAR0	(*(volatile u32 *)MB_A_PCI_PCIBAR0_ADDR)
-#define MB_A_PCI_PCIBAR1_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x14)
-#define MB_A_PCI_PCIBAR1	(*(volatile u32 *)MB_A_PCI_PCIBAR1_ADDR)
-#define MB_A_PCI_PCIBAR2_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x18)
-#define MB_A_PCI_PCIBAR2	(*(volatile u32 *)MB_A_PCI_PCIBAR2_ADDR)
-#define MB_A_PCI_VENDOR_ID_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x2C)
-#define MB_A_PCI_VENDOR_ID	(*(volatile u16 *)MB_A_PCI_VENDOR_ID_ADDR)
-#define MB_A_PCI_DEVICE_ID_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x2E)
-#define MB_A_PCI_DEVICE_ID	(*(volatile u16 *)MB_A_PCI_DEVICE_ID_ADDR)
-#define MB_A_PCI_DMRR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x9C)
-#define MB_A_PCI_DMRR		(*(volatile u32 *)MB_A_PCI_DMRR_ADDR)
-#define MB_A_PCI_DMLBAM_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA0)
-#define MB_A_PCI_DMLBAM		(*(volatile u32 *)MB_A_PCI_DMLBAM_ADDR)
-#define MB_A_PCI_DMLBAI_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA4)
-#define MB_A_PCI_DMLBAI		(*(volatile u32 *)MB_A_PCI_DMLBAI_ADDR)
-#define MB_A_PCI_PCIPBAM_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA8)
-#define MB_A_PCI_PCIPBAM	(*(volatile u32 *)MB_A_PCI_PCIPBAM_ADDR)
-/* `PCI Configuration Address Register for Direct Master to PCI IO/CFG'  */
-#define MB_A_PCI_DMCFGA_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xAC)
-#define MB_A_PCI_DMCFGA		(*(volatile u32 *)MB_A_PCI_DMCFGA_ADDR)
-/* `PCI Permanent Configuration ID Register'  */
-#define MB_A_PCI_PCIHIDR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xF0)
-#define MB_A_PCI_PCIHIDR	(*(volatile u32 *)MB_A_PCI_PCIHIDR_ADDR)
-
-
-#endif /* __V850_MB_A_PCI_H__ */
diff --git a/include/asm-v850/rte_me2_cb.h b/include/asm-v850/rte_me2_cb.h
deleted file mode 100644
index 9922c85c85a..00000000000
--- a/include/asm-v850/rte_me2_cb.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * include/asm-v850/rte_me2_cb.h -- Midas labs RTE-V850E/ME2-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_ME2_CB_H__
-#define __V850_RTE_ME2_CB_H__
-
-#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
-
-
-#define PLATFORM		"rte-v850e/me2-cb"
-#define PLATFORM_LONG		"Midas lab RTE-V850E/ME2-CB"
-
-#define CPU_CLOCK_FREQ		150000000 /* 150MHz */
-#define FIXED_BOGOMIPS		50
-
-/* 32MB of onbard SDRAM.  */
-#define SDRAM_ADDR		0x00800000
-#define SDRAM_SIZE		0x02000000 /* 32MB */
-
-
-/* CPU addresses of GBUS memory spaces.  */
-#define GCS0_ADDR		0x04000000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE		0x00800000 /*   8MB */
-#define GCS1_ADDR		0x04800000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE		0x00800000 /*   8MB */
-#define GCS2_ADDR		0x07000000 /* GCS2 - I/O registers */
-#define GCS2_SIZE		0x00800000 /*   8MB */
-#define GCS5_ADDR		0x08000000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE		0x02000000 /*   32MB */
-#define GCS6_ADDR		0x07800000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE		0x00800000 /*   8MB */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 		SDRAM_ADDR
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0.  */
-
-#define INTV_BASE		0
-#define ROOT_FS_IMAGE_RW	0
-
-#else /* !CONFIG_ROM_KERNEL */
-/* Using RAM-kernel.  Assume some sort of boot-loader got us loaded at
-   address 0.  */
-
-#define INTV_BASE		0
-#define ROOT_FS_IMAGE_RW	1
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices.  */
-
-/* Seven-segment LED display (four digits).  */
-#define LED_ADDR(n)		(0x0FE02000 + (n))
-#define LED(n)			(*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS		4
-
-
-/* On-board PIC.  */
-
-#define CB_PIC_BASE_ADDR 	0x0FE04000
-
-#define CB_PIC_INT0M_ADDR 	(CB_PIC_BASE_ADDR + 0x00)
-#define CB_PIC_INT0M      	(*(volatile u16 *)CB_PIC_INT0M_ADDR)
-#define CB_PIC_INT1M_ADDR 	(CB_PIC_BASE_ADDR + 0x10)
-#define CB_PIC_INT1M      	(*(volatile u16 *)CB_PIC_INT1M_ADDR)
-#define CB_PIC_INTR_ADDR  	(CB_PIC_BASE_ADDR + 0x20)
-#define CB_PIC_INTR       	(*(volatile u16 *)CB_PIC_INTR_ADDR)
-#define CB_PIC_INTEN_ADDR 	(CB_PIC_BASE_ADDR + 0x30)
-#define CB_PIC_INTEN      	(*(volatile u16 *)CB_PIC_INTEN_ADDR)
-
-#define CB_PIC_INT0EN        	0x0001
-#define CB_PIC_INT1EN        	0x0002
-#define CB_PIC_INT0SEL       	0x0080
-
-/* The PIC interrupts themselves.  */
-#define CB_PIC_BASE_IRQ		NUM_CPU_IRQS
-#define IRQ_CB_PIC_NUM		10
-
-/* Some specific CB_PIC interrupts. */
-#define IRQ_CB_EXTTM0		(CB_PIC_BASE_IRQ + 0)
-#define IRQ_CB_EXTSIO		(CB_PIC_BASE_IRQ + 1)
-#define IRQ_CB_TOVER		(CB_PIC_BASE_IRQ + 2)
-#define IRQ_CB_GINT0		(CB_PIC_BASE_IRQ + 3)
-#define IRQ_CB_USB		(CB_PIC_BASE_IRQ + 4)
-#define IRQ_CB_LANC		(CB_PIC_BASE_IRQ + 5)
-#define IRQ_CB_USB_VBUS_ON	(CB_PIC_BASE_IRQ + 6)
-#define IRQ_CB_USB_VBUS_OFF	(CB_PIC_BASE_IRQ + 7)
-#define IRQ_CB_EXTTM1		(CB_PIC_BASE_IRQ + 8)
-#define IRQ_CB_EXTTM2		(CB_PIC_BASE_IRQ + 9)
-
-/* The GBUS GINT1 - GINT3 (note, not GINT0!) interrupts are connected to
-   the INTP65 - INTP67 pins on the CPU.  These are shared among the GBUS
-   interrupts.  */
-#define IRQ_GINT(n)		IRQ_INTP((n) + 9)  /* 0 is unused! */
-#define IRQ_GINT_NUM		4		   /* 0 is unused! */
-
-/* The shared interrupt line from the PIC is connected to CPU pin INTP23.  */
-#define IRQ_CB_PIC		IRQ_INTP(4) /* P23 */
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
-#define NUM_RTE_CB_IRQS		(NUM_CPU_IRQS + IRQ_CB_PIC_NUM)
-
-
-#ifndef __ASSEMBLY__
-struct cb_pic_irq_init {
-	const char *name;	/* name of interrupt type */
-
-	/* Range of kernel irq numbers for this type:
-	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
-	unsigned base, num, interval;
-
-	unsigned priority;	/* interrupt priority to assign */
-};
-struct hw_interrupt_type;	/* fwd decl */
-
-/* Enable interrupt handling for interrupt IRQ.  */
-extern void cb_pic_enable_irq (unsigned irq);
-/* Disable interrupt handling for interrupt IRQ.  Note that any interrupts
-   received while disabled will be delivered once the interrupt is enabled
-   again, unless they are explicitly cleared using `cb_pic_clear_pending_irq'.  */
-extern void cb_pic_disable_irq (unsigned irq);
-/* Initialize HW_IRQ_TYPES for PIC irqs described in array INITS (which is
-   terminated by an entry with the name field == 0).  */
-extern void cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
-				   struct hw_interrupt_type *hw_irq_types);
-/* Initialize PIC interrupts.  */
-extern void cb_pic_init_irqs (void);
-#endif /* __ASSEMBLY__ */
-
-
-/* TL16C550C on board UART see also asm/serial.h */
-#define CB_UART_BASE    	0x0FE08000
-#define CB_UART_REG_GAP 	0x10
-#define CB_UART_CLOCK   	0x16000000
-
-/* CompactFlash setting */
-#define CB_CF_BASE     		0x0FE0C000
-#define CB_CF_CCR_ADDR 		(CB_CF_BASE+0x200)
-#define CB_CF_CCR      		(*(volatile u8 *)CB_CF_CCR_ADDR)
-#define CB_CF_REG0_ADDR		(CB_CF_BASE+0x1000)
-#define CB_CF_REG0     		(*(volatile u16 *)CB_CF_REG0_ADDR)
-#define CB_CF_STS0_ADDR		(CB_CF_BASE+0x1004)
-#define CB_CF_STS0     		(*(volatile u16 *)CB_CF_STS0_ADDR)
-#define CB_PCATA_BASE  		(CB_CF_BASE+0x800)
-#define CB_IDE_BASE    		(CB_CF_BASE+0x9F0)
-#define CB_IDE_CTRL    		(CB_CF_BASE+0xBF6)
-#define CB_IDE_REG_OFFS		0x1
-
-
-/* SMSC LAN91C111 setting */
-#if defined(CONFIG_SMC91111)
-#define CB_LANC_BASE 		0x0FE10300
-#define CONFIG_SMC16BITONLY
-#define ETH0_ADDR 		CB_LANC_BASE
-#define ETH0_IRQ 		IRQ_CB_LANC
-#endif /* CONFIG_SMC16BITONLY */
-
-
-#undef V850E_UART_PRE_CONFIGURE
-#define V850E_UART_PRE_CONFIGURE	rte_me2_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_me2_cb_uart_pre_configure (unsigned chan,
-					   unsigned cflags, unsigned baud);
-#endif /* __ASSEMBLY__ */
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
-
-/* CTS for UART channel 0 is pin P22 (bit 2 of port 2).  */
-#define V850E_UART_CTS(chan)	((chan) == 0 ? !(ME2_PORT2_IO & 0x4) : 1)
-/* RTS for UART channel 0 is pin P21 (bit 1 of port 2).  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   if (chan == 0) {						      \
-		   unsigned old = ME2_PORT2_IO; 			      \
-		   if (val)						      \
-			   ME2_PORT2_IO = old & ~0x2;			      \
-		   else							      \
-			   ME2_PORT2_IO = old | 0x2;			      \
-	   }								      \
-   } while (0)
-
-
-#ifndef __ASSEMBLY__
-extern void rte_me2_cb_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_RTE_ME2_CB_H__ */
diff --git a/include/asm-v850/rte_nb85e_cb.h b/include/asm-v850/rte_nb85e_cb.h
deleted file mode 100644
index f56591cad90..00000000000
--- a/include/asm-v850/rte_nb85e_cb.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * include/asm-v850/rte_nb85e_cb.h -- Midas labs RTE-V850/NB85E-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_NB85E_CB_H__
-#define __V850_RTE_NB85E_CB_H__
-
-#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
-
-
-#define PLATFORM		"rte-v850e/nb85e-cb"
-#define PLATFORM_LONG		"Midas lab RTE-V850E/NB85E-CB"
-
-#define CPU_CLOCK_FREQ		50000000 /* 50MHz */
-
-/* 1MB of onboard SRAM.  Note that the monitor ROM uses parts of this
-   for its own purposes, so care must be taken.  */
-#define SRAM_ADDR		0x03C00000
-#define SRAM_SIZE		0x00100000 /* 1MB */
-
-/* 16MB of onbard SDRAM.  */
-#define SDRAM_ADDR		0x01000000
-#define SDRAM_SIZE		0x01000000 /* 16MB */
-
-
-/* CPU addresses of GBUS memory spaces.  */
-#define GCS0_ADDR		0x00400000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE		0x00400000 /*   4MB */
-#define GCS1_ADDR		0x02000000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE		0x00800000 /*   8MB */
-#define GCS2_ADDR		0x03900000 /* GCS2 - I/O registers */
-#define GCS2_SIZE		0x00080000 /*   512KB */
-#define GCS3_ADDR		0x02800000 /* GCS3 - EXT-bus: memory space */
-#define GCS3_SIZE		0x00800000 /*   8MB */
-#define GCS4_ADDR		0x03A00000 /* GCS4 - EXT-bus: I/O space */
-#define GCS4_SIZE		0x00200000 /*   2MB */
-#define GCS5_ADDR		0x00800000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE		0x00800000 /*   8MB */
-#define GCS6_ADDR		0x03980000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE		0x00010000 /*   64KB */
-
-
-/* The GBUS GINT0 - GINT3 interrupts are connected to CPU interrupts 10-12.
-   These are shared among the GBUS interrupts.  */
-#define IRQ_GINT(n)		(10 + (n))
-#define IRQ_GINT_NUM		3
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
-#define NUM_RTE_CB_IRQS		NUM_CPU_IRQS
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0.  */
-
-#define INTV_BASE	0
-
-#else /* !CONFIG_ROM_KERNEL */
-/* We're using the ROM monitor.  */
-
-/* The chip's real interrupt vectors are in ROM, but they jump to a
-   secondary interrupt vector table in RAM.  */
-#define INTV_BASE		0x03CF8000
-
-/* Scratch memory used by the ROM monitor, which shouldn't be used by
-   linux (except for the alternate interrupt vector area, defined
-   above).  */
-#define MON_SCRATCH_ADDR	0x03CE8000
-#define MON_SCRATCH_SIZE	0x00018000 /* 96KB */
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices.  */
-
-/* Seven-segment LED display (two digits).  Write-only.  */
-#define LED_ADDR(n)	(0x03802000 + (n))
-#define LED(n)		(*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS	4
-
-
-/* Override the basic TEG UART pre-initialization so that we can
-   initialize extra stuff.  */
-#undef V850E_UART_PRE_CONFIGURE	/* should be defined by <asm/teg.h> */
-#define V850E_UART_PRE_CONFIGURE	rte_nb85e_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_nb85e_cb_uart_pre_configure (unsigned chan,
-					     unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART. */
-
-/* CTS is pin P00.  */
-#define V850E_UART_CTS(chan)	(! (TEG_PORT0_IO & 0x1))
-/* RTS is pin P02.  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   unsigned old = TEG_PORT0_IO;					      \
-	   TEG_PORT0_IO = val ? (old & ~0x4) : (old | 0x4);		      \
-   } while (0)
-
-
-#endif /* __V850_RTE_NB85E_CB_H__ */
diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h
deleted file mode 100644
index 02d27b3fb06..00000000000
--- a/include/asm-v850/scatterlist.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-v850/scatterlist.h
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SCATTERLIST_H__
-#define __V850_SCATTERLIST_H__
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned	offset;
-	dma_addr_t	dma_address;
-	unsigned	length;
-};
-
-#define ISA_DMA_THRESHOLD	(~0UL)
-
-#endif /* __V850_SCATTERLIST_H__ */
diff --git a/include/asm-v850/sections.h b/include/asm-v850/sections.h
deleted file mode 100644
index e0238253a0d..00000000000
--- a/include/asm-v850/sections.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_SECTIONS_H__
-#define __V850_SECTIONS_H__
-
-#include <asm-generic/sections.h>
-
-#endif /* __V850_SECTIONS_H__ */
diff --git a/include/asm-v850/segment.h b/include/asm-v850/segment.h
deleted file mode 100644
index 5e2b15dcf3d..00000000000
--- a/include/asm-v850/segment.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __V850_SEGMENT_H__
-#define __V850_SEGMENT_H__
-
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_segment_t;	/* domain register */
-
-#endif /* !__ASSEMBLY__ */
-
-
-#define __KERNEL_CS	0x0
-#define __KERNEL_DS	0x0
-
-#define __USER_CS	0x1
-#define __USER_DS	0x1
-
-#define KERNEL_DS	__KERNEL_DS
-#define KERNEL_CS	__KERNEL_CS
-#define USER_DS		__USER_DS
-#define USER_CS		__USER_CS
-
-#define segment_eq(a,b)	((a) == (b))
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()	(USER_DS)
-
-#define set_fs(seg)	((void)(seg))
-
-
-#define copy_segments(task, mm)	((void)((void)(task), (mm)))
-#define release_segments(mm)	((void)(mm))
-#define forget_segments()	((void)0)
-
-
-#endif /* __V850_SEGMENT_H__ */
diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h
deleted file mode 100644
index d9b2034ed1d..00000000000
--- a/include/asm-v850/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-v850/sembuf.h b/include/asm-v850/sembuf.h
deleted file mode 100644
index 1622231a8b8..00000000000
--- a/include/asm-v850/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __V850_SEMBUF_H__
-#define __V850_SEMBUF_H__
-
-/* 
- * The semid64_ds structure for v850 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __V850_SEMBUF_H__ */
diff --git a/include/asm-v850/serial.h b/include/asm-v850/serial.h
deleted file mode 100644
index 36d8f4cbbf3..00000000000
--- a/include/asm-v850/serial.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */ 
-
-#ifdef CONFIG_RTE_CB_ME2
-
-#include <asm/rte_me2_cb.h>
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define irq_cannonicalize(x) (x)
-#define BASE_BAUD	250000	/* (16MHz / (16 * 38400)) * 9600 */
-#define SERIAL_PORT_DFNS \
-   { 0, BASE_BAUD, CB_UART_BASE, IRQ_CB_EXTSIO, STD_COM_FLAGS },
-
-/* Redefine UART register offsets.  */
-#undef UART_RX
-#undef UART_TX
-#undef UART_DLL
-#undef UART_TRG
-#undef UART_DLM
-#undef UART_IER
-#undef UART_FCTR
-#undef UART_IIR
-#undef UART_FCR
-#undef UART_EFR
-#undef UART_LCR
-#undef UART_MCR
-#undef UART_LSR
-#undef UART_MSR
-#undef UART_SCR
-#undef UART_EMSR
-
-#define UART_RX		(0 * CB_UART_REG_GAP)
-#define UART_TX		(0 * CB_UART_REG_GAP)
-#define UART_DLL	(0 * CB_UART_REG_GAP)
-#define UART_TRG	(0 * CB_UART_REG_GAP)
-#define UART_DLM	(1 * CB_UART_REG_GAP)
-#define UART_IER	(1 * CB_UART_REG_GAP)
-#define UART_FCTR	(1 * CB_UART_REG_GAP)
-#define UART_IIR	(2 * CB_UART_REG_GAP)
-#define UART_FCR	(2 * CB_UART_REG_GAP)
-#define UART_EFR	(2 * CB_UART_REG_GAP)
-#define UART_LCR	(3 * CB_UART_REG_GAP)
-#define UART_MCR	(4 * CB_UART_REG_GAP)
-#define UART_LSR	(5 * CB_UART_REG_GAP)
-#define UART_MSR	(6 * CB_UART_REG_GAP)
-#define UART_SCR	(7 * CB_UART_REG_GAP)
-#define UART_EMSR	(7 * CB_UART_REG_GAP)
-
-#endif /* CONFIG_RTE_CB_ME2 */
diff --git a/include/asm-v850/setup.h b/include/asm-v850/setup.h
deleted file mode 100644
index c48a9b97d05..00000000000
--- a/include/asm-v850/setup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _V850_SETUP_H
-#define _V850_SETUP_H
-
-#define COMMAND_LINE_SIZE	512
-
-#endif /* __SETUP_H */
diff --git a/include/asm-v850/shmbuf.h b/include/asm-v850/shmbuf.h
deleted file mode 100644
index 3d085c9c418..00000000000
--- a/include/asm-v850/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __V850_SHMBUF_H__
-#define __V850_SHMBUF_H__
-
-/* 
- * The shmid64_ds structure for v850 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __V850_SHMBUF_H__ */
diff --git a/include/asm-v850/shmparam.h b/include/asm-v850/shmparam.h
deleted file mode 100644
index 7dcb6739073..00000000000
--- a/include/asm-v850/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_SHMPARAM_H__
-#define __V850_SHMPARAM_H__
-
-#define	SHMLBA		PAGE_SIZE	/* attach addr a multiple of this */
-
-#endif /* __V850_SHMPARAM_H__ */
diff --git a/include/asm-v850/sigcontext.h b/include/asm-v850/sigcontext.h
deleted file mode 100644
index e0890f6f4bc..00000000000
--- a/include/asm-v850/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-v850/sigcontext.h -- Signal contexts
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIGCONTEXT_H__
-#define __V850_SIGCONTEXT_H__
-
-#include <asm/ptrace.h>
-
-struct sigcontext
-{
-	struct pt_regs 	regs;
-	unsigned long	oldmask;
-};
-
-#endif /* __V850_SIGCONTEXT_H__ */
diff --git a/include/asm-v850/siginfo.h b/include/asm-v850/siginfo.h
deleted file mode 100644
index 7eb94703dce..00000000000
--- a/include/asm-v850/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_SIGINFO_H__
-#define __V850_SIGINFO_H__
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __V850_SIGINFO_H__ */
diff --git a/include/asm-v850/signal.h b/include/asm-v850/signal.h
deleted file mode 100644
index a38df0834bb..00000000000
--- a/include/asm-v850/signal.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef __V850_SIGNAL_H__
-#define __V850_SIGNAL_H__
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-
-#ifdef __KERNEL__
-
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_SIGNAL_H__ */
diff --git a/include/asm-v850/sim.h b/include/asm-v850/sim.h
deleted file mode 100644
index 026932d476c..00000000000
--- a/include/asm-v850/sim.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-v850/sim.h -- Machine-dependent defs for GDB v850e simulator
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM_H__
-#define __V850_SIM_H__
-
-
-#define CPU_ARCH		"v850e"
-#define CPU_MODEL		"v850e"
-#define CPU_MODEL_LONG		"NEC V850E"
-#define PLATFORM		"gdb/v850e"
-#define PLATFORM_LONG		"GDB V850E simulator"
-
-
-/* We use a weird value for RAM, not just 0, for testing purposes.
-   These must match the values used in the linker script.  */
-#define RAM_ADDR		0x8F000000
-#define RAM_SIZE		0x03000000
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 		RAM_ADDR
-
-
-/* For <asm/entry.h> */
-/* `R0 RAM', used for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  On real
-   processors, this usually is on-chip RAM, but here we just
-   choose an arbitrary address that meets the above constraint.  */
-#define R0_RAM_ADDR		0xFFFFF000
-
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS		6
-
-
-#endif /* __V850_SIM_H__ */
diff --git a/include/asm-v850/sim85e2.h b/include/asm-v850/sim85e2.h
deleted file mode 100644
index 8b4d6974066..00000000000
--- a/include/asm-v850/sim85e2.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-v850/sim85e2.h -- Machine-dependent defs for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM85E2_H__
-#define __V850_SIM85E2_H__
-
-
-#include <asm/v850e2.h>		/* Based on V850E2 core.  */
-
-
-/* Various memory areas supported by the simulator.
-   These should match the corresponding definitions in the linker script.  */
-
-/* `instruction RAM'; instruction fetches are much faster from IRAM than
-   from DRAM.  */
-#define IRAM_ADDR		0
-#define IRAM_SIZE		0x00100000 /* 1MB */
-/* `data RAM', below and contiguous with the I/O space.
-   Data fetches are much faster from DRAM than from IRAM.  */
-#define DRAM_ADDR		0xfff00000
-#define DRAM_SIZE		0x000ff000 /* 1020KB */
-/* `external ram'.  Unlike the above RAM areas, this memory is cached,
-   so both instruction and data fetches should be (mostly) fast --
-   however, currently only write-through caching is supported, so writes
-   to ERAM will be slow.  */
-#define ERAM_ADDR		0x00100000
-#define ERAM_SIZE		0x07f00000 /* 127MB (max) */
-/* Dynamic RAM; uses memory controller.  */
-#define SDRAM_ADDR		0x10000000
-#define SDRAM_SIZE		0x01000000 /* 16MB */
-
-
-/* Simulator specific control registers.  */
-/* NOTHAL controls whether the simulator will stop at a `halt' insn.  */
-#define SIM85E2_NOTHAL_ADDR	0xffffff22
-#define SIM85E2_NOTHAL		(*(volatile u8 *)SIM85E2_NOTHAL_ADDR)
-/* The simulator will stop N cycles after N is written to SIMFIN.  */
-#define SIM85E2_SIMFIN_ADDR	0xffffff24
-#define SIM85E2_SIMFIN		(*(volatile u16 *)SIM85E2_SIMFIN_ADDR)
-
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS		64
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET		SDRAM_ADDR
-
-
-/* For <asm/entry.h> */
-/* `R0 RAM', used for a few miscellaneous variables that must be accessible
-   using a load instruction relative to R0.  The sim85e2 simulator
-   actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily
-   choose a small portion at the end of that.  */
-#define R0_RAM_ADDR		0xFFFFE000
-
-
-#endif /* __V850_SIM85E2_H__ */
diff --git a/include/asm-v850/sim85e2c.h b/include/asm-v850/sim85e2c.h
deleted file mode 100644
index eee543ff3af..00000000000
--- a/include/asm-v850/sim85e2c.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-v850/sim85e2c.h -- Machine-dependent defs for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2002  NEC Corporation
- *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM85E2C_H__
-#define __V850_SIM85E2C_H__
-
-/* Use generic sim85e2 settings, other than the various names.  */
-#include <asm/sim85e2.h>
-
-#define CPU_MODEL	"v850e2"
-#define CPU_MODEL_LONG	"NEC V850E2"
-#define PLATFORM	"sim85e2c"
-#define PLATFORM_LONG	"SIM85E2C V850E2 simulator"
-
-#endif /* __V850_SIM85E2C_H__ */
diff --git a/include/asm-v850/sim85e2s.h b/include/asm-v850/sim85e2s.h
deleted file mode 100644
index ee066d5d3c5..00000000000
--- a/include/asm-v850/sim85e2s.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-v850/sim85e2s.h -- Machine-dependent defs for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM85E2S_H__
-#define __V850_SIM85E2S_H__
-
-#include <asm/sim85e2.h>	/* Use generic sim85e2 settings.  */
-#if 0
-#include <asm/v850e2_cache.h>	/* + cache */
-#endif
-
-#define CPU_MODEL	"v850e2"
-#define CPU_MODEL_LONG	"NEC V850E2"
-#define PLATFORM	"sim85e2s"
-#define PLATFORM_LONG	"SIM85E2S V850E2 simulator"
-
-#endif /* __V850_SIM85E2S_H__ */
diff --git a/include/asm-v850/simsyscall.h b/include/asm-v850/simsyscall.h
deleted file mode 100644
index 4a19d5ae9d1..00000000000
--- a/include/asm-v850/simsyscall.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * include/asm-v850/simsyscall.h -- `System calls' under the v850e emulator
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIMSYSCALL_H__
-#define __V850_SIMSYSCALL_H__
-
-#define V850_SIM_SYS_exit(a...)		V850_SIM_SYSCALL_1 (1	, ##a)
-#define V850_SIM_SYS_fork(a...)		V850_SIM_SYSCALL_0 (2	, ##a)
-#define V850_SIM_SYS_read(a...)		V850_SIM_SYSCALL_3 (3	, ##a)
-#define V850_SIM_SYS_write(a...)	V850_SIM_SYSCALL_3 (4	, ##a)
-#define V850_SIM_SYS_open(a...)		V850_SIM_SYSCALL_2 (5	, ##a)
-#define V850_SIM_SYS_close(a...)	V850_SIM_SYSCALL_1 (6	, ##a)
-#define V850_SIM_SYS_wait4(a...)	V850_SIM_SYSCALL_4 (7	, ##a)
-/* #define V850_SIM_SYS_creat(a...)	V850_SIM_SYSCALL_1 (8	, ##a) */
-/* #define V850_SIM_SYS_link(a...)	V850_SIM_SYSCALL_1 (9	, ##a) */
-/* #define V850_SIM_SYS_unlink(a...)	V850_SIM_SYSCALL_1 (10	, ##a) */
-#define V850_SIM_SYS_execv(a...)	V850_SIM_SYSCALL_2 (11	, ##a)
-/* #define V850_SIM_SYS_chdir(a...)	V850_SIM_SYSCALL_1 (12	, ##a) */
-/* #define V850_SIM_SYS_mknod(a...)	V850_SIM_SYSCALL_1 (14	, ##a) */
-#define V850_SIM_SYS_chmod(a...)	V850_SIM_SYSCALL_2 (15	, ##a)
-#define V850_SIM_SYS_chown(a...)	V850_SIM_SYSCALL_2 (16	, ##a)
-#define V850_SIM_SYS_lseek(a...)	V850_SIM_SYSCALL_3 (19	, ##a)
-/* #define V850_SIM_SYS_getpid(a...)	V850_SIM_SYSCALL_1 (20	, ##a) */
-/* #define V850_SIM_SYS_isatty(a...)	V850_SIM_SYSCALL_1 (21	, ##a) */
-/* #define V850_SIM_SYS_fstat(a...)	V850_SIM_SYSCALL_1 (22	, ##a) */
-#define V850_SIM_SYS_time(a...)		V850_SIM_SYSCALL_1 (23	, ##a)
-#define V850_SIM_SYS_poll(a...)		V850_SIM_SYSCALL_3 (24	, ##a)
-#define V850_SIM_SYS_stat(a...)		V850_SIM_SYSCALL_2 (38	, ##a)
-#define V850_SIM_SYS_pipe(a...)		V850_SIM_SYSCALL_1 (42	, ##a)
-#define V850_SIM_SYS_times(a...)	V850_SIM_SYSCALL_1 (43	, ##a)
-#define V850_SIM_SYS_execve(a...)	V850_SIM_SYSCALL_3 (59	, ##a)
-#define V850_SIM_SYS_gettimeofday(a...)	V850_SIM_SYSCALL_2 (116	, ##a)
-/* #define V850_SIM_SYS_utime(a...)	V850_SIM_SYSCALL_2 (201	, ##a) */
-/* #define V850_SIM_SYS_wait(a...)	V850_SIM_SYSCALL_1 (202	, ##a) */
-
-#define V850_SIM_SYS_make_raw(a...)	V850_SIM_SYSCALL_1 (1024 , ##a)
-
-
-#define V850_SIM_SYSCALL_0(_call)					      \
-({									      \
-	register int call __asm__ ("r6") = _call;			      \
-	register int rval __asm__ ("r10");				      \
-	__asm__ __volatile__ ("trap 31"					      \
-			      : "=r" (rval)				      \
-			      : "r" (call)				      \
-			      : "r11", "memory");			      \
-	rval;								      \
-})
-#define V850_SIM_SYSCALL_1(_call, _arg0)				      \
-({									      \
-	register int call __asm__ ("r6") = _call;			      \
-	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
-	register int rval __asm__ ("r10");				      \
-	__asm__ __volatile__ ("trap 31"					      \
-			      : "=r" (rval)				      \
-			      : "r" (call), "r" (arg0)			      \
-			      : "r11", "memory");			      \
-	rval;								      \
-})
-#define V850_SIM_SYSCALL_2(_call, _arg0, _arg1)				      \
-({									      \
-	register int call __asm__ ("r6") = _call;			      \
-	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
-	register long arg1 __asm__ ("r8") = (long)_arg1;		      \
-	register int rval __asm__ ("r10");				      \
-	__asm__ __volatile__ ("trap 31"					      \
-			      : "=r" (rval)				      \
-			      : "r" (call), "r" (arg0), "r" (arg1)	      \
-			      : "r11", "memory");			      \
-	rval;								      \
-})
-#define V850_SIM_SYSCALL_3(_call, _arg0, _arg1, _arg2)			      \
-({									      \
-	register int call __asm__ ("r6") = _call;			      \
-	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
-	register long arg1 __asm__ ("r8") = (long)_arg1;		      \
-	register long arg2 __asm__ ("r9") = (long)_arg2;		      \
-	register int rval __asm__ ("r10");				      \
-	__asm__ __volatile__ ("trap 31"					      \
-			      : "=r" (rval)				      \
-			      : "r" (call), "r" (arg0), "r" (arg1), "r" (arg2)\
-			      : "r11", "memory");			      \
-	rval;								      \
-})
-
-#define V850_SIM_SYSCALL(call, args...) \
-   V850_SIM_SYS_##call (args)
-
-#endif /* __V850_SIMSYSCALL_H__ */
diff --git a/include/asm-v850/socket.h b/include/asm-v850/socket.h
deleted file mode 100644
index e199a2bf12a..00000000000
--- a/include/asm-v850/socket.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __V850_SOCKET_H__
-#define __V850_SOCKET_H__
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#endif /* __V850_SOCKET_H__ */
diff --git a/include/asm-v850/sockios.h b/include/asm-v850/sockios.h
deleted file mode 100644
index 823e106e6cd..00000000000
--- a/include/asm-v850/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __V850_SOCKIOS_H__
-#define __V850_SOCKIOS_H__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* __V850_SOCKIOS_H__ */
diff --git a/include/asm-v850/stat.h b/include/asm-v850/stat.h
deleted file mode 100644
index c68c60d06e2..00000000000
--- a/include/asm-v850/stat.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-v850/stat.h -- v850 stat structure
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_STAT_H__
-#define __V850_STAT_H__
-
-#include <asm/posix_types.h>
-
-struct stat {
-	unsigned int	st_dev;
-	unsigned long	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-	unsigned int 	st_uid;
-	unsigned int 	st_gid;
-	unsigned int	st_rdev;
-	long		st_size;
-	unsigned long	st_blksize;
-	unsigned long	st_blocks;
-	unsigned long	st_atime;
-	unsigned long	__unused1;
-	unsigned long	st_mtime;
-	unsigned long	__unused2;
-	unsigned long	st_ctime;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-	unsigned long	__unused5;
-};
-
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned long	__unused1;
-
-	unsigned long long	st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned long	__unused3;
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	unsigned long	st_blocks; /* No. of 512-byte blocks allocated */
-	unsigned long	__unused4; /* future possible st_blocks high bits */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long	__unused8;
-};
-
-#endif /* __V850_STAT_H__ */
diff --git a/include/asm-v850/statfs.h b/include/asm-v850/statfs.h
deleted file mode 100644
index ea1596607f2..00000000000
--- a/include/asm-v850/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_STATFS_H__
-#define __V850_STATFS_H__
-
-#include <asm-generic/statfs.h>
-
-#endif /* __V850_STATFS_H__ */
diff --git a/include/asm-v850/string.h b/include/asm-v850/string.h
deleted file mode 100644
index 478e234789d..00000000000
--- a/include/asm-v850/string.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-v850/string.h -- Architecture specific string routines
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_STRING_H__
-#define __V850_STRING_H__
-
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_MEMMOVE
-
-extern void *memcpy (void *, const void *, __kernel_size_t);
-extern void *memset (void *, int, __kernel_size_t);
-extern void *memmove (void *, const void *, __kernel_size_t);
-
-#endif /* __V850_STRING_H__ */
diff --git a/include/asm-v850/system.h b/include/asm-v850/system.h
deleted file mode 100644
index 7daf1fdee11..00000000000
--- a/include/asm-v850/system.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * include/asm-v850/system.h -- Low-level interrupt/thread ops
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SYSTEM_H__
-#define __V850_SYSTEM_H__
-
-#include <linux/linkage.h>
-#include <asm/ptrace.h>
-
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.
- */
-struct thread_struct;
-extern void *switch_thread (struct thread_struct *last,
-			    struct thread_struct *next);
-#define switch_to(prev,next,last)					      \
-  do {									      \
-        if (prev != next) {						      \
- 		(last) = switch_thread (&prev->thread, &next->thread);	      \
-	}								      \
-  } while (0)
-
-
-/* Enable/disable interrupts.  */
-#define local_irq_enable()	__asm__ __volatile__ ("ei")
-#define local_irq_disable()	__asm__ __volatile__ ("di")
-
-#define local_save_flags(flags) \
-  __asm__ __volatile__ ("stsr %1, %0" : "=r" (flags) : "i" (SR_PSW))
-#define local_restore_flags(flags) \
-  __asm__ __volatile__ ("ldsr %0, %1" :: "r" (flags), "i" (SR_PSW))
-
-/* For spinlocks etc */
-#define	local_irq_save(flags) \
-  do { local_save_flags (flags); local_irq_disable (); } while (0) 
-#define local_irq_restore(flags) \
-  local_restore_flags (flags);
-
-
-static inline int irqs_disabled (void)
-{
-	unsigned flags;
-	local_save_flags (flags);
-	return !!(flags & 0x20);
-}
-
-
-/*
- * Force strict CPU ordering.
- * Not really required on v850...
- */
-#define nop()			__asm__ __volatile__ ("nop")
-#define mb()			__asm__ __volatile__ ("" ::: "memory")
-#define rmb()			mb ()
-#define wmb()			mb ()
-#define read_barrier_depends()	((void)0)
-#define set_mb(var, value)	do { xchg (&var, value); } while (0)
-
-#define smp_mb()	mb ()
-#define smp_rmb()	rmb ()
-#define smp_wmb()	wmb ()
-#define smp_read_barrier_depends()	read_barrier_depends()
-
-#define xchg(ptr, with) \
-  ((__typeof__ (*(ptr)))__xchg ((unsigned long)(with), (ptr), sizeof (*(ptr))))
-
-static inline unsigned long __xchg (unsigned long with,
-				    __volatile__ void *ptr, int size)
-{
-	unsigned long tmp, flags;
-
-	local_irq_save (flags);
-
-	switch (size) {
-	case 1:
-		tmp = *(unsigned char *)ptr;
-		*(unsigned char *)ptr = with;
-		break;
-	case 2:
-		tmp = *(unsigned short *)ptr;
-		*(unsigned short *)ptr = with;
-		break;
-	case 4:
-		tmp = *(unsigned long *)ptr;
-		*(unsigned long *)ptr = with;
-		break;
-	}
-
-	local_irq_restore (flags);
-
-	return tmp;
-}
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#define arch_align_stack(x) (x)
-
-#endif /* __V850_SYSTEM_H__ */
diff --git a/include/asm-v850/teg.h b/include/asm-v850/teg.h
deleted file mode 100644
index acc8c7d9532..00000000000
--- a/include/asm-v850/teg.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * include/asm-v850/teg.h -- NB85E-TEG cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TEG_H__
-#define __V850_TEG_H__
-
-
-/* The TEG uses the V850E cpu core.  */
-#include <asm/v850e.h>
-#include <asm/v850e_cache.h>
-
-
-#define CPU_MODEL	"v850e/nb85e-teg"
-#define CPU_MODEL_LONG	"NEC V850E/NB85E TEG"
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  On the NB85E/TEG,
-   There's 60KB of iRAM starting at 0xFFFF0000, however we need the base
-   address to be addressable by a 16-bit signed offset, so we only use the
-   second half of it starting from 0xFFFF8000.  */
-#define R0_RAM_ADDR			0xFFFF8000
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).
-   Some of these are parameterized even though there's only a single
-   interrupt, for compatibility with some generic code that works on other
-   processor models.  */
-#define IRQ_INTCMD(n)	6	/* interval timer interrupt */
-#define IRQ_INTCMD_NUM	1
-#define IRQ_INTSER(n)	16	/* UART reception error */
-#define IRQ_INTSER_NUM	1
-#define IRQ_INTSR(n)	17	/* UART reception completion */
-#define IRQ_INTSR_NUM	1
-#define IRQ_INTST(n)	18	/* UART transmission completion */
-#define IRQ_INTST_NUM	1
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS	64
-
-
-/* TEG UART details.  */
-#define V850E_UART_BASE_ADDR(n)		(0xFFFFF600 + 0x10 * (n))
-#define V850E_UART_ASIM_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x0)
-#define V850E_UART_ASIS_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x2)
-#define V850E_UART_ASIF_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x4)
-#define V850E_UART_CKSR_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x6)
-#define V850E_UART_BRGC_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x8)
-#define V850E_UART_TXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0xA)
-#define V850E_UART_RXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0xC)
-#define V850E_UART_NUM_CHANNELS		1
-#define V850E_UART_BASE_FREQ		CPU_CLOCK_FREQ
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	teg_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void teg_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud);
-#endif
-
-
-/* The TEG RTPU.  */
-#define V850E_RTPU_BASE_ADDR		0xFFFFF210
-
-
-/* TEG series timer D details.  */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF210
-#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x8)
-#define V850E_TIMER_D_BASE_FREQ		CPU_CLOCK_FREQ
-
-
-/* `Interrupt Source Select' control register.  */
-#define TEG_ISS_ADDR			0xFFFFF7FA
-#define TEG_ISS				(*(volatile u8 *)TEG_ISS_ADDR)
-
-/* Port 0 I/O register (bits 0-3 used).  */
-#define TEG_PORT0_IO_ADDR		0xFFFFF7F2
-#define TEG_PORT0_IO			(*(volatile u8 *)TEG_PORT0_IO_ADDR)
-/* Port 0 control register (bits 0-3 control mode, 0 = output, 1 = input).  */
-#define TEG_PORT0_PM_ADDR		0xFFFFF7F4
-#define TEG_PORT0_PM			(*(volatile u8 *)TEG_PORT0_PM_ADDR)
-
-
-#ifndef __ASSEMBLY__
-extern void teg_init_irqs (void);
-#endif
-
-
-#endif /* __V850_TEG_H__ */
diff --git a/include/asm-v850/termbits.h b/include/asm-v850/termbits.h
deleted file mode 100644
index 295d7bf6945..00000000000
--- a/include/asm-v850/termbits.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef __V850_TERMBITS_H__
-#define __V850_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define	IBSHIFT	16		/* Shifr from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* __V850_TERMBITS_H__ */
diff --git a/include/asm-v850/termios.h b/include/asm-v850/termios.h
deleted file mode 100644
index fcd171838d9..00000000000
--- a/include/asm-v850/termios.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef __V850_TERMIOS_H__
-#define __V850_TERMIOS_H__
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
-	unsigned short __tmp; \
-	get_user(__tmp,&(termio)->x); \
-	*(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif	/* __V850_TERMIOS_H__ */
diff --git a/include/asm-v850/thread_info.h b/include/asm-v850/thread_info.h
deleted file mode 100644
index 1a9e6ae0c5f..00000000000
--- a/include/asm-v850/thread_info.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * include/asm-v850/thread_info.h -- v850 low-level thread information
- *
- *  Copyright (C) 2002  NEC Corporation
- *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
- *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
- *    - Incorporating suggestions made by Linus Torvalds and Dave Miller
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was derived from the PPC version, include/asm-ppc/thread_info.h
- * which was adapted from the i386 version by Paul Mackerras
- */
-
-#ifndef __V850_THREAD_INFO_H__
-#define __V850_THREAD_INFO_H__
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * low level task data.
- * If you change this, change the TI_* offsets below to match.
- */
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	int			cpu;		/* cpu we're on */
-	int			preempt_count;	/* 0 => preemptable,
-						   <0 => BUG */
-	struct restart_block	restart_block;
-};
-
-#define INIT_THREAD_INFO(tsk)						      \
-{									      \
-	.task =		&tsk,						      \
-	.exec_domain =	&default_exec_domain,				      \
-	.flags =	0,						      \
-	.cpu =		0,						      \
-	.preempt_count = 1,						      \
-	.restart_block = {						      \
-		.fn = do_no_restart_syscall,				      \
-	},								      \
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, 1))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
-
-#endif /* __ASSEMBLY__ */
-
-
-/*
- * Offsets in thread_info structure, used in assembly code
- */
-#define TI_TASK		0
-#define TI_EXECDOMAIN	4
-#define TI_FLAGS	8
-#define TI_CPU		12
-#define TI_PREEMPT	16
-
-#define PREEMPT_ACTIVE		0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-
-
-/* Size of kernel stack for each process.  */
-#define THREAD_SIZE		0x2000
-
-/* The alignment of kernel threads, with thread_info structures at their
-   base.  Thus, a pointer for a task's task structure can be derived from
-   its kernel stack pointer.  */
-#define THREAD_ALIGNMENT	THREAD_SIZE
-#define THREAD_MASK		(-THREAD_ALIGNMENT)
-
-
-#ifdef __ASSEMBLY__
-
-/* Put a pointer to the current thread_info structure into REG.  Note that
-   this definition requires THREAD_MASK to be representable as a signed
-   16-bit value.  */
-#define GET_CURRENT_THREAD(reg)						\
-        /* Use `addi' and then `and' instead of just `andi', because	\
-	   `addi' sign-extends the immediate value, whereas `andi'	\
-	   zero-extends it.  */						\
-	addi	THREAD_MASK, r0, reg;					\
-	and	sp, reg
-
-#else
-
-/* Return a pointer to the current thread_info structure.  */
-static inline struct thread_info *current_thread_info (void)
-{
-	register unsigned long sp __asm__ ("sp");
-	return (struct thread_info *)(sp & THREAD_MASK);
-}
-
-#endif /* __ASSEMBLY__ */
-
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_THREAD_INFO_H__ */
diff --git a/include/asm-v850/timex.h b/include/asm-v850/timex.h
deleted file mode 100644
index 6279e5a0ee8..00000000000
--- a/include/asm-v850/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-v850/timex.h
- *
- * v850 architecture timex specifications
- */
-#ifndef __V850_TIMEX_H__
-#define __V850_TIMEX_H__
-
-#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
-	return 0;
-}
-
-#endif /* __V850_TIMEX_H__ */
diff --git a/include/asm-v850/tlb.h b/include/asm-v850/tlb.h
deleted file mode 100644
index 73bc9ead40d..00000000000
--- a/include/asm-v850/tlb.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-v850/tlb.h
- *
- *  Copyright (C) 2002  NEC Corporation
- *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TLB_H__
-#define __V850_TLB_H__
-
-#define tlb_flush(tlb)	((void)0)
-
-#include <asm-generic/tlb.h>
-
-#endif /* __V850_TLB_H__ */
diff --git a/include/asm-v850/tlbflush.h b/include/asm-v850/tlbflush.h
deleted file mode 100644
index c44aa64449c..00000000000
--- a/include/asm-v850/tlbflush.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-v850/tlbflush.h
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TLBFLUSH_H__
-#define __V850_TLBFLUSH_H__
-
-#include <asm/machdep.h>
-
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
-	BUG ();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
-	BUG ();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
-	BUG ();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	BUG ();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	BUG ();
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-	BUG ();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
-	BUG ();
-}
-
-#endif /* __V850_TLBFLUSH_H__ */
diff --git a/include/asm-v850/topology.h b/include/asm-v850/topology.h
deleted file mode 100644
index 6040e41d794..00000000000
--- a/include/asm-v850/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_TOPOLOGY_H__
-#define __V850_TOPOLOGY_H__
-
-#include <asm-generic/topology.h>
-
-#endif /* __V850_TOPOLOGY_H__ */
diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h
deleted file mode 100644
index 89f735ee41d..00000000000
--- a/include/asm-v850/types.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __V850_TYPES_H__
-#define __V850_TYPES_H__
-
-#ifndef __ASSEMBLY__
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-ll64.h>
-
-typedef unsigned short umode_t;
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_TYPES_H__ */
diff --git a/include/asm-v850/uaccess.h b/include/asm-v850/uaccess.h
deleted file mode 100644
index 64563c409bb..00000000000
--- a/include/asm-v850/uaccess.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef __V850_UACCESS_H__
-#define __V850_UACCESS_H__
-
-/*
- * User space memory access functions
- */
-
-#include <linux/errno.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-#include <asm/machdep.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-static inline int access_ok (int type, const void *addr, unsigned long size)
-{
-	/* XXX I guess we should check against real ram bounds at least, and
-	   possibly make sure ADDR is not within the kernel.
-	   For now we just check to make sure it's not a small positive
-	   or negative value, as that will at least catch some kinds of
-	   error.  In particular, we make sure that ADDR's not within the
-	   interrupt vector area, which we know starts at zero, or within the
-	   peripheral-I/O area, which is located just _before_ zero.  */
-	unsigned long val = (unsigned long)addr;
-	return val >= (0x80 + NUM_CPU_IRQS*16) && val < 0xFFFFF000;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table (unsigned long);
-
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- */
-
-extern int bad_user_access_length (void);
-
-#define __get_user(var, ptr)						      \
-  ({									      \
-	  int __gu_err = 0;						      \
-	  typeof(*(ptr)) __gu_val = 0;					      \
-	  switch (sizeof (*(ptr))) {					      \
-	  case 1:							      \
-	  case 2:							      \
-	  case 4:							      \
-		  __gu_val = *(ptr);					      \
-		  break;						      \
-	  case 8:							      \
-		  memcpy(&__gu_val, ptr, sizeof(__gu_val));		      \
-		  break;						      \
-	  default:							      \
-		  __gu_val = 0;						      \
-		  __gu_err = __get_user_bad ();				      \
-		  break;						      \
-	  }								      \
-	  (var) = __gu_val;						      \
-	  __gu_err;							      \
-  })
-#define __get_user_bad()	(bad_user_access_length (), (-EFAULT))
-
-#define __put_user(var, ptr)						      \
-  ({									      \
-	  int __pu_err = 0;						      \
-	  switch (sizeof (*(ptr))) {					      \
-	  case 1:							      \
-	  case 2:							      \
-	  case 4:							      \
-		  *(ptr) = (var);					      \
-		  break;						      \
-	  case 8: {							      \
-	  	  typeof(*(ptr)) __pu_val = 0;				      \
-		  memcpy(ptr, &__pu_val, sizeof(__pu_val));		      \
-		  }							      \
-		  break;						      \
-	  default:							      \
-		  __pu_err = __put_user_bad ();				      \
-		  break;						      \
-	  }								      \
-	  __pu_err;							      \
-  })
-#define __put_user_bad()	(bad_user_access_length (), (-EFAULT))
-
-#define put_user(x, ptr)	__put_user(x, ptr)
-#define get_user(x, ptr)	__get_user(x, ptr)
-
-#define __copy_from_user(to, from, n)	(memcpy (to, from, n), 0)
-#define __copy_to_user(to, from, n)	(memcpy(to, from, n), 0)
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_from_user(to, from, n)	__copy_from_user (to, from, n)
-#define copy_to_user(to, from, n) 	__copy_to_user(to, from, n)
-
-#define copy_to_user_ret(to,from,n,retval) \
-  ({ if (copy_to_user (to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) \
-  ({ if (copy_from_user (to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user (char *dst, const char *src, long count)
-{
-	char *tmp;
-	strncpy (dst, src, count);
-	for (tmp = dst; *tmp && count > 0; tmp++, count--)
-		;
-	return tmp - dst;
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user (const char *src, long n)
-{
-	return strlen (src) + 1;
-}
-
-#define strlen_user(str)	strnlen_user (str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-clear_user (void *to, unsigned long n)
-{
-	memset (to, 0, n);
-	return 0;
-}
-
-#endif /* __V850_UACCESS_H__ */
diff --git a/include/asm-v850/ucontext.h b/include/asm-v850/ucontext.h
deleted file mode 100644
index 303c21590cf..00000000000
--- a/include/asm-v850/ucontext.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __V850_UCONTEXT_H__
-#define __V850_UCONTEXT_H__
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* __V850_UCONTEXT_H__ */
diff --git a/include/asm-v850/unaligned.h b/include/asm-v850/unaligned.h
deleted file mode 100644
index 53122b28491..00000000000
--- a/include/asm-v850/unaligned.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Note that some v850 chips support unaligned access, but it seems too
- * annoying to use.
- */
-#ifndef _ASM_V850_UNALIGNED_H
-#define _ASM_V850_UNALIGNED_H
-
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_le
-#define put_unaligned	__put_unaligned_le
-
-#endif /* _ASM_V850_UNALIGNED_H */
diff --git a/include/asm-v850/unistd.h b/include/asm-v850/unistd.h
deleted file mode 100644
index 2241ed45ecf..00000000000
--- a/include/asm-v850/unistd.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * include/asm-v850/unistd.h -- System call numbers and invocation mechanism
- *
- *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_UNISTD_H__
-#define __V850_UNISTD_H__
-
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_break		 17
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_setpgid		 57
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_ugetrlimit	 	 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_vhangup		111
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread		180
-#define __NR_pwrite		181
-#define __NR_lchown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_fcntl64		198
-#define __NR_getdents64		199
-#define __NR_pivot_root		200
-#define __NR_gettid		201
-#define __NR_tkill		202
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- */
-#define cond_syscall(name)						      \
-  asm (".weak\t" C_SYMBOL_STRING(name) ";"				      \
-       ".set\t" C_SYMBOL_STRING(name) "," C_SYMBOL_STRING(sys_ni_syscall))
-#if 0
-/* This doesn't work if there's a function prototype for NAME visible,
-   because the argument types probably won't match.  */
-#define cond_syscall(name)  \
-  void name (void) __attribute__ ((weak, alias ("sys_ni_syscall")));
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __V850_UNISTD_H__ */
diff --git a/include/asm-v850/user.h b/include/asm-v850/user.h
deleted file mode 100644
index 63cdc567d27..00000000000
--- a/include/asm-v850/user.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef __V850_USER_H__
-#define __V850_USER_H__
-
-/* Adapted from <asm-ppc/user.h>.  */
-
-#include <linux/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
- * are as follows:
- *
- *  upage: 1 page consisting of a user struct that tells gdb
- *	what is present in the file.  Directly after this is a
- *	copy of the task_struct, which is currently not used by gdb,
- *	but it may come in handy at some point.  All of the registers
- *	are stored as part of the upage.  The upage should always be
- *	only one page long.
- *  data: The data segment follows next.  We use current->end_text to
- *	current->brk to pick up all of the user variables, plus any memory
- *	that may have been sbrk'ed.  No attempt is made to determine if a
- *	page is demand-zero or if a page is totally unused, we just cover
- *	the entire range.  All of the addresses are rounded in such a way
- *	that an integral number of pages is written.
- *  stack: We need the stack information in order to get a meaningful
- *	backtrace.  We need to write the data from usp to
- *	current->start_stack, so we round each of these in order to be able
- *	to write an integer number of pages.
- */
-struct user {
-	struct pt_regs	regs;			/* entire machine state */
-	size_t		u_tsize;		/* text size (pages) */
-	size_t		u_dsize;		/* data size (pages) */
-	size_t		u_ssize;		/* stack size (pages) */
-	unsigned long	start_code;		/* text starting address */
-	unsigned long	start_data;		/* data starting address */
-	unsigned long	start_stack;		/* stack starting address */
-	long int	signal;			/* signal causing core dump */
-	unsigned long	u_ar0;			/* help gdb find registers */
-	unsigned long	magic;			/* identifies a core file */
-	char		u_comm[32];		/* user command name */
-};
-
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-
-#endif /* __V850_USER_H__ */
diff --git a/include/asm-v850/v850e.h b/include/asm-v850/v850e.h
deleted file mode 100644
index 5a222eb5117..00000000000
--- a/include/asm-v850/v850e.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-v850/v850e.h -- V850E CPU
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_H__
-#define __V850_V850E_H__
-
-#include <asm/v850e_intc.h>
-
-#define CPU_ARCH "v850e"
-
-#endif /* __V850_V850E_H__ */
diff --git a/include/asm-v850/v850e2.h b/include/asm-v850/v850e2.h
deleted file mode 100644
index 48680408ab7..00000000000
--- a/include/asm-v850/v850e2.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-v850/v850e2.h -- Machine-dependent defs for V850E2 CPUs
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E2_H__
-#define __V850_V850E2_H__
-
-#include <asm/v850e_intc.h>	/* v850e-style interrupt system.  */
-
-
-#define CPU_ARCH "v850e2"
-
-
-/* Control registers.  */
-
-/* Chip area select control */ 
-#define V850E2_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
-#define V850E2_CSC(n)		(*(volatile u16 *)V850E2_CSC_ADDR(n))
-/* I/O area select control */
-#define V850E2_BPC_ADDR		0xFFFFF064
-#define V850E2_BPC		(*(volatile u16 *)V850E2_BPC_ADDR)
-/* Bus size configuration */
-#define V850E2_BSC_ADDR		0xFFFFF066
-#define V850E2_BSC		(*(volatile u16 *)V850E2_BSC_ADDR)
-/* Endian configuration */
-#define V850E2_BEC_ADDR		0xFFFFF068
-#define V850E2_BEC		(*(volatile u16 *)V850E2_BEC_ADDR)
-/* Cache configuration */
-#define V850E2_BHC_ADDR		0xFFFFF06A
-#define V850E2_BHC		(*(volatile u16 *)V850E2_BHC_ADDR)
-/* NPB strobe-wait configuration */
-#define V850E2_VSWC_ADDR	0xFFFFF06E
-#define V850E2_VSWC		(*(volatile u16 *)V850E2_VSWC_ADDR)
-/* Bus cycle type */
-#define V850E2_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
-#define V850E2_BCT(n)		(*(volatile u16 *)V850E2_BCT_ADDR(n))
-/* Data wait control */
-#define V850E2_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
-#define V850E2_DWC(n)		(*(volatile u16 *)V850E2_DWC_ADDR(n))
-/* Bus cycle control */
-#define V850E2_BCC_ADDR		0xFFFFF488
-#define V850E2_BCC		(*(volatile u16 *)V850E2_BCC_ADDR)
-/* Address wait control */
-#define V850E2_ASC_ADDR		0xFFFFF48A
-#define V850E2_ASC		(*(volatile u16 *)V850E2_ASC_ADDR)
-/* Local bus sizing control */
-#define V850E2_LBS_ADDR		0xFFFFF48E
-#define V850E2_LBS		(*(volatile u16 *)V850E2_LBS_ADDR)
-/* Line buffer control */
-#define V850E2_LBC_ADDR(n)	(0xFFFFF490 + (n) * 2)
-#define V850E2_LBC(n)		(*(volatile u16 *)V850E2_LBC_ADDR(n))
-/* SDRAM configuration */
-#define V850E2_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
-#define V850E2_SCR(n)		(*(volatile u16 *)V850E2_SCR_ADDR(n))
-/* SDRAM refresh cycle control */
-#define V850E2_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
-#define V850E2_RFS(n)		(*(volatile u16 *)V850E2_RFS_ADDR(n))
-
-
-#endif /* __V850_V850E2_H__ */
diff --git a/include/asm-v850/v850e2_cache.h b/include/asm-v850/v850e2_cache.h
deleted file mode 100644
index 87edf0d311d..00000000000
--- a/include/asm-v850/v850e2_cache.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * include/asm-v850/v850e2_cache_cache.h -- Cache control for V850E2
- * 	cache memories
- *
- *  Copyright (C) 2003,05  NEC Electronics Corporation
- *  Copyright (C) 2003,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E2_CACHE_H__
-#define __V850_V850E2_CACHE_H__
-
-#include <asm/types.h>
-
-
-/* Cache control registers.  */
-
-/* Bus Transaction Control */
-#define V850E2_CACHE_BTSC_ADDR	0xFFFFF070
-#define V850E2_CACHE_BTSC 	(*(volatile u16 *)V850E2_CACHE_BTSC_ADDR)
-#define V850E2_CACHE_BTSC_ICM	0x0001 /* icache enable */
-#define V850E2_CACHE_BTSC_DCM0	0x0004 /* dcache enable, bit 0 */
-#define V850E2_CACHE_BTSC_DCM1	0x0008 /* dcache enable, bit 1 */
-#define V850E2_CACHE_BTSC_DCM_WT		      /* write-through */ \
-			V850E2_CACHE_BTSC_DCM0
-#ifdef CONFIG_V850E2_V850E2S
-# define V850E2_CACHE_BTSC_DCM_WB_NO_ALLOC    /* write-back, non-alloc */ \
-			V850E2_CACHE_BTSC_DCM1	
-# define V850E2_CACHE_BTSC_DCM_WB_ALLOC	      /* write-back, non-alloc */ \
-			(V850E2_CACHE_BTSC_DCM1 | V850E2_CACHE_BTSC_DCM0)
-# define V850E2_CACHE_BTSC_ISEQ	0x0010 /* icache `address sequence mode' */
-# define V850E2_CACHE_BTSC_DSEQ	0x0020 /* dcache `address sequence mode' */
-# define V850E2_CACHE_BTSC_IRFC	0x0030
-# define V850E2_CACHE_BTSC_ILCD	0x4000
-# define V850E2_CACHE_BTSC_VABE	0x8000
-#endif /* CONFIG_V850E2_V850E2S */
-
-/* Cache operation start address register (low-bits).  */
-#define V850E2_CACHE_CADL_ADDR	0xFFFFF074
-#define V850E2_CACHE_CADL 	(*(volatile u16 *)V850E2_CACHE_CADL_ADDR)
-/* Cache operation start address register (high-bits).  */
-#define V850E2_CACHE_CADH_ADDR	0xFFFFF076
-#define V850E2_CACHE_CADH 	(*(volatile u16 *)V850E2_CACHE_CADH_ADDR)
-/* Cache operation count register.  */
-#define V850E2_CACHE_CCNT_ADDR	0xFFFFF078
-#define V850E2_CACHE_CCNT 	(*(volatile u16 *)V850E2_CACHE_CCNT_ADDR)
-/* Cache operation specification register.  */
-#define V850E2_CACHE_COPR_ADDR	0xFFFFF07A
-#define V850E2_CACHE_COPR 	(*(volatile u16 *)V850E2_CACHE_COPR_ADDR)
-#define V850E2_CACHE_COPR_STRT	0x0001 /* start cache operation */
-#define V850E2_CACHE_COPR_LBSL	0x0100 /* 0 = icache, 1 = dcache */
-#define V850E2_CACHE_COPR_WSLE	0x0200 /* operate on cache way */
-#define V850E2_CACHE_COPR_WSL(way) ((way) * 0x0400) /* way select */
-#define V850E2_CACHE_COPR_CFC(op)  ((op)  * 0x1000) /* cache function code */
-
-
-/* Size of a cache line in bytes.  */
-#define V850E2_CACHE_LINE_SIZE_BITS	4
-#define V850E2_CACHE_LINE_SIZE		(1 << V850E2_CACHE_LINE_SIZE_BITS)
-
-/* The size of each cache `way' in lines.  */
-#define V850E2_CACHE_WAY_SIZE		256
-
-
-/* For <asm/cache.h> */
-#define L1_CACHE_BYTES			V850E2_CACHE_LINE_SIZE
-#define L1_CACHE_SHIFT			V850E2_CACHE_LINE_SIZE_BITS
-
-
-#endif /* __V850_V850E2_CACHE_H__ */
diff --git a/include/asm-v850/v850e_cache.h b/include/asm-v850/v850e_cache.h
deleted file mode 100644
index aa7d7eb9da5..00000000000
--- a/include/asm-v850/v850e_cache.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-v850/v850e_cache.h -- Cache control for V850E cache memories
- *
- *  Copyright (C) 2001,03  NEC Electronics Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This file implements cache control for the rather simple cache used on
-   some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
-   CPU.  V850E2 processors have their own (better) cache
-   implementation.  */
-
-#ifndef __V850_V850E_CACHE_H__
-#define __V850_V850E_CACHE_H__
-
-#include <asm/types.h>
-
-
-/* Cache control registers.  */
-#define V850E_CACHE_BHC_ADDR	0xFFFFF06A
-#define V850E_CACHE_BHC		(*(volatile u16 *)V850E_CACHE_BHC_ADDR)
-#define V850E_CACHE_ICC_ADDR	0xFFFFF070
-#define V850E_CACHE_ICC		(*(volatile u16 *)V850E_CACHE_ICC_ADDR)
-#define V850E_CACHE_ISI_ADDR	0xFFFFF072
-#define V850E_CACHE_ISI		(*(volatile u16 *)V850E_CACHE_ISI_ADDR)
-#define V850E_CACHE_DCC_ADDR	0xFFFFF078
-#define V850E_CACHE_DCC		(*(volatile u16 *)V850E_CACHE_DCC_ADDR)
-
-/* Size of a cache line in bytes.  */
-#define V850E_CACHE_LINE_SIZE	16
-
-/* For <asm/cache.h> */
-#define L1_CACHE_BYTES		V850E_CACHE_LINE_SIZE
-
-
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-/* Set caching params via the BHC, ICC, and DCC registers.  */
-void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc);
-#endif /* __KERNEL__ && !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_CACHE_H__ */
diff --git a/include/asm-v850/v850e_intc.h b/include/asm-v850/v850e_intc.h
deleted file mode 100644
index 6fdf9570831..00000000000
--- a/include/asm-v850/v850e_intc.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * include/asm-v850/v850e_intc.h -- V850E CPU interrupt controller (INTC)
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_INTC_H__
-#define __V850_V850E_INTC_H__
-
-
-/* There are 4 16-bit `Interrupt Mask Registers' located contiguously
-   starting from this base.  Each interrupt uses a single bit to
-   indicated enabled/disabled status.  */
-#define V850E_INTC_IMR_BASE_ADDR  0xFFFFF100
-#define V850E_INTC_IMR_ADDR(irq)  (V850E_INTC_IMR_BASE_ADDR + ((irq) >> 3))
-#define V850E_INTC_IMR_BIT(irq)	  ((irq) & 0x7)
-
-/* Each maskable interrupt has a single-byte control register at this
-   address.  */
-#define V850E_INTC_IC_BASE_ADDR	  0xFFFFF110
-#define V850E_INTC_IC_ADDR(irq)	  (V850E_INTC_IC_BASE_ADDR + ((irq) << 1))
-#define V850E_INTC_IC(irq)	  (*(volatile u8 *)V850E_INTC_IC_ADDR(irq))
-/* Encode priority PR for storing in an interrupt control register.  */
-#define V850E_INTC_IC_PR(pr)	  (pr)
-/* Interrupt disable bit in an interrupt control register.  */
-#define V850E_INTC_IC_MK_BIT	  6
-#define V850E_INTC_IC_MK	  (1 << V850E_INTC_IC_MK_BIT)
-/* Interrupt pending flag in an interrupt control register.  */
-#define V850E_INTC_IC_IF_BIT	  7
-#define V850E_INTC_IC_IF	  (1 << V850E_INTC_IC_IF_BIT)
-
-/* The ISPR (In-service priority register) contains one bit for each interrupt
-   priority level, which is set to one when that level is currently being
-   serviced (and thus blocking any interrupts of equal or lesser level).  */
-#define V850E_INTC_ISPR_ADDR	  0xFFFFF1FA
-#define V850E_INTC_ISPR		  (*(volatile u8 *)V850E_INTC_ISPR_ADDR)
-
-
-#ifndef __ASSEMBLY__
-
-/* Enable interrupt handling for interrupt IRQ.  */
-static inline void v850e_intc_enable_irq (unsigned irq)
-{
-	__asm__ __volatile__ ("clr1 %0, [%1]"
-			      :: "r" (V850E_INTC_IMR_BIT (irq)),
-			         "r" (V850E_INTC_IMR_ADDR (irq))
-			      : "memory");
-}
-
-/* Disable interrupt handling for interrupt IRQ.  Note that any
-   interrupts received while disabled will be delivered once the
-   interrupt is enabled again, unless they are explicitly cleared using
-   `v850e_intc_clear_pending_irq'.  */
-static inline void v850e_intc_disable_irq (unsigned irq)
-{
-	__asm__ __volatile__ ("set1 %0, [%1]"
-			      :: "r" (V850E_INTC_IMR_BIT (irq)),
-			         "r" (V850E_INTC_IMR_ADDR (irq))
-			      : "memory");
-}
-
-/* Return true if interrupt handling for interrupt IRQ is enabled.  */
-static inline int v850e_intc_irq_enabled (unsigned irq)
-{
-	int rval;
-	__asm__ __volatile__ ("tst1 %1, [%2]; setf z, %0"
-			      : "=r" (rval)
-			      : "r" (V850E_INTC_IMR_BIT (irq)),
-			        "r" (V850E_INTC_IMR_ADDR (irq)));
-	return rval;
-}
-
-/* Disable irqs from 0 until LIMIT.  LIMIT must be a multiple of 8.  */
-static inline void _v850e_intc_disable_irqs (unsigned limit)
-{
-	unsigned long addr;
-	for (addr = V850E_INTC_IMR_BASE_ADDR; limit >= 8; addr++, limit -= 8)
-		*(char *)addr = 0xFF;
-}
-
-/* Disable all irqs.  This is purposely a macro, because NUM_MACH_IRQS
-   will be only be defined later.  */
-#define v850e_intc_disable_irqs()   _v850e_intc_disable_irqs (NUM_MACH_IRQS)
-
-/* Clear any pending interrupts for IRQ.  */
-static inline void v850e_intc_clear_pending_irq (unsigned irq)
-{
-	__asm__ __volatile__ ("clr1 %0, 0[%1]"
-			      :: "i" (V850E_INTC_IC_IF_BIT),
-			         "r" (V850E_INTC_IC_ADDR (irq))
-			      : "memory");
-}
-
-/* Return true if interrupt IRQ is pending (but disabled).  */
-static inline int v850e_intc_irq_pending (unsigned irq)
-{
-	int rval;
-	__asm__ __volatile__ ("tst1 %1, 0[%2]; setf nz, %0"
-			      : "=r" (rval)
-			      : "i" (V850E_INTC_IC_IF_BIT),
-			        "r" (V850E_INTC_IC_ADDR (irq)));
-	return rval;
-}
-
-
-struct v850e_intc_irq_init {
-	const char *name;	/* name of interrupt type */
-
-	/* Range of kernel irq numbers for this type:
-	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
-	unsigned base, num, interval;
-
-	unsigned priority;	/* interrupt priority to assign */
-};
-struct hw_interrupt_type;	/* fwd decl */
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-extern void v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
-				       struct hw_interrupt_type *hw_irq_types);
-
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_INTC_H__ */
diff --git a/include/asm-v850/v850e_timer_c.h b/include/asm-v850/v850e_timer_c.h
deleted file mode 100644
index f70575df6ea..00000000000
--- a/include/asm-v850/v850e_timer_c.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_c.h -- `Timer C' component often used
- *	with the V850E cpu core
- *
- *  Copyright (C) 2001,03  NEC Electronics Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* NOTE: this include file currently contains only enough to allow us to
-   use timer C as an interrupt pass-through.  */
-
-#ifndef __V850_V850E_TIMER_C_H__
-#define __V850_V850E_TIMER_C_H__
-
-#include <asm/types.h>
-#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
-
-
-/* Timer C (16-bit interval timers).  */
-
-/* Control register 0 for timer C.  */
-#define V850E_TIMER_C_TMCC0_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x6 + 0x10 *(n))
-#define V850E_TIMER_C_TMCC0(n)	  (*(volatile u8 *)V850E_TIMER_C_TMCC0_ADDR(n))
-#define V850E_TIMER_C_TMCC0_CAE	  0x01 /* clock action enable */
-#define V850E_TIMER_C_TMCC0_CE	  0x02 /* count enable */
-/* ... */
-
-/* Control register 1 for timer C.  */
-#define V850E_TIMER_C_TMCC1_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x8 + 0x10 *(n))
-#define V850E_TIMER_C_TMCC1(n)	  (*(volatile u8 *)V850E_TIMER_C_TMCC1_ADDR(n))
-#define V850E_TIMER_C_TMCC1_CMS0  0x01 /* capture/compare mode select (ccc0) */
-#define V850E_TIMER_C_TMCC1_CMS1  0x02 /* capture/compare mode select (ccc1) */
-/* ... */
-
-/* Interrupt edge-sensitivity control for timer C.  */
-#define V850E_TIMER_C_SESC_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x9 + 0x10 *(n))
-#define V850E_TIMER_C_SESC(n)	  (*(volatile u8 *)V850E_TIMER_C_SESC_ADDR(n))
-
-/* ...etc... */
-
-
-#endif /* __V850_V850E_TIMER_C_H__  */
diff --git a/include/asm-v850/v850e_timer_d.h b/include/asm-v850/v850e_timer_d.h
deleted file mode 100644
index 417612c5b22..00000000000
--- a/include/asm-v850/v850e_timer_d.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_d.h -- `Timer D' component often used
- *	with the V850E cpu core
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_TIMER_D_H__
-#define __V850_V850E_TIMER_D_H__
-
-#include <asm/types.h>
-#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
-
-
-/* Timer D (16-bit interval timers).  */
-
-/* Count registers for timer D.  */
-#define V850E_TIMER_D_TMD_ADDR(n) (V850E_TIMER_D_TMD_BASE_ADDR + 0x10 * (n))
-#define V850E_TIMER_D_TMD(n)	  (*(volatile u16 *)V850E_TIMER_D_TMD_ADDR(n))
-
-/* Count compare registers for timer D.  */
-#define V850E_TIMER_D_CMD_ADDR(n) (V850E_TIMER_D_CMD_BASE_ADDR + 0x10 * (n))
-#define V850E_TIMER_D_CMD(n)	  (*(volatile u16 *)V850E_TIMER_D_CMD_ADDR(n))
-
-/* Control registers for timer D.  */
-#define V850E_TIMER_D_TMCD_ADDR(n) (V850E_TIMER_D_TMCD_BASE_ADDR + 0x10 * (n))
-#define V850E_TIMER_D_TMCD(n)	   (*(volatile u8 *)V850E_TIMER_D_TMCD_ADDR(n))
-/* Control bits for timer D.  */
-#define V850E_TIMER_D_TMCD_CE  	   0x2 /* count enable */
-#define V850E_TIMER_D_TMCD_CAE	   0x1 /* clock action enable */
-/* Clock divider setting (log2).  */
-#define V850E_TIMER_D_TMCD_CS(divlog2) (((divlog2) - V850E_TIMER_D_TMCD_CS_MIN) << 4)
-/* Minimum clock divider setting (log2).  */
-#ifndef V850E_TIMER_D_TMCD_CS_MIN /* Can be overridden by mach-specific hdrs */
-#define V850E_TIMER_D_TMCD_CS_MIN  2 /* Default is correct for the v850e/ma1 */
-#endif
-/* Maximum clock divider setting (log2).  */
-#define V850E_TIMER_D_TMCD_CS_MAX  (V850E_TIMER_D_TMCD_CS_MIN + 7)
-
-/* Return the clock-divider (log2) of timer D unit N.  */
-#define V850E_TIMER_D_DIVLOG2(n) \
-  (((V850E_TIMER_D_TMCD(n) >> 4) & 0x7) + V850E_TIMER_D_TMCD_CS_MIN)
-
-
-#ifndef __ASSEMBLY__
-
-/* Start interval timer TIMER (0-3).  The timer will issue the
-   corresponding INTCMD interrupt RATE times per second.  This function
-   does not enable the interrupt.  */
-extern void v850e_timer_d_configure (unsigned timer, unsigned rate);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_TIMER_D_H__  */
diff --git a/include/asm-v850/v850e_uart.h b/include/asm-v850/v850e_uart.h
deleted file mode 100644
index 5182fb4cc98..00000000000
--- a/include/asm-v850/v850e_uart.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-v850/v850e_uart.h -- common V850E on-chip UART driver
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* There's not actually a single UART implementation used by V850E CPUs,
-   but rather a series of implementations that are all `close' to one
-   another.  This file corresponds to the single driver which handles all
-   of them.  */
-
-#ifndef __V850_V850E_UART_H__
-#define __V850_V850E_UART_H__
-
-#include <linux/termios.h>
-
-#include <asm/v850e_utils.h>
-#include <asm/types.h>
-#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
-
-
-/* Include model-specific definitions.  */
-#ifdef CONFIG_V850E_UART
-# ifdef CONFIG_V850E_UARTB
-#  include <asm-v850/v850e_uartb.h>
-# else
-#  include <asm-v850/v850e_uarta.h> /* original V850E UART */
-# endif
-#endif
-
-
-/* Optional capabilities some hardware provides.  */
-
-/* This UART doesn't implement RTS/CTS by default, but some platforms
-   implement them externally, so check to see if <asm/machdep.h> defined
-   anything.  */
-#ifdef V850E_UART_CTS
-#define v850e_uart_cts(n)		V850E_UART_CTS(n)
-#else
-#define v850e_uart_cts(n)		(1)
-#endif
-
-/* Do the same for RTS.  */
-#ifdef V850E_UART_SET_RTS
-#define v850e_uart_set_rts(n,v)		V850E_UART_SET_RTS(n,v)
-#else
-#define v850e_uart_set_rts(n,v)		((void)0)
-#endif
-
-
-/* This is the serial channel to use for the boot console (if desired).  */
-#ifndef V850E_UART_CONSOLE_CHANNEL
-# define V850E_UART_CONSOLE_CHANNEL 0
-#endif
-
-
-#ifndef __ASSEMBLY__
-
-/* Setup a console using channel 0 of the builtin uart.  */
-extern void v850e_uart_cons_init (unsigned chan);
-
-/* Configure and turn on uart channel CHAN, using the termios `control
-   modes' bits in CFLAGS, and a baud-rate of BAUD.  */
-void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_UART_H__ */
diff --git a/include/asm-v850/v850e_uarta.h b/include/asm-v850/v850e_uarta.h
deleted file mode 100644
index e483e095072..00000000000
--- a/include/asm-v850/v850e_uarta.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * include/asm-v850/v850e_uarta.h -- original V850E on-chip UART
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This is the original V850E UART implementation is called just `UART' in
-   the docs, but we name this header file <asm/v850e_uarta.h> because the
-   name <asm/v850e_uart.h> is used for the common driver that handles both
-   `UART' and `UARTB' implementations.  */
-
-#ifndef __V850_V850E_UARTA_H__
-#define __V850_V850E_UARTA_H__
-
-
-/* Raw hardware interface.  */
-
-/* The base address of the UART control registers for channel N.
-   The default is the address used on the V850E/MA1.  */
-#ifndef V850E_UART_BASE_ADDR
-#define V850E_UART_BASE_ADDR(n)		(0xFFFFFA00 + 0x10 * (n))
-#endif 
-
-/* Addresses of specific UART control registers for channel N.
-   The defaults are the addresses used on the V850E/MA1; if a platform
-   wants to redefine any of these, it must redefine them all.  */
-#ifndef V850E_UART_ASIM_ADDR
-#define V850E_UART_ASIM_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x0)
-#define V850E_UART_RXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x2)
-#define V850E_UART_ASIS_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x3)
-#define V850E_UART_TXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x4)
-#define V850E_UART_ASIF_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x5)
-#define V850E_UART_CKSR_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x6)
-#define V850E_UART_BRGC_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x7)
-#endif
-
-/* UART config registers.  */
-#define V850E_UART_ASIM(n)	(*(volatile u8 *)V850E_UART_ASIM_ADDR(n))
-/* Control bits for config registers.  */
-#define V850E_UART_ASIM_CAE	0x80 /* clock enable */
-#define V850E_UART_ASIM_TXE	0x40 /* transmit enable */
-#define V850E_UART_ASIM_RXE	0x20 /* receive enable */
-#define V850E_UART_ASIM_PS_MASK	0x18 /* mask covering parity-select bits */
-#define V850E_UART_ASIM_PS_NONE	0x00 /* no parity */
-#define V850E_UART_ASIM_PS_ZERO	0x08 /* zero parity */
-#define V850E_UART_ASIM_PS_ODD	0x10 /* odd parity */
-#define V850E_UART_ASIM_PS_EVEN	0x18 /* even parity */
-#define V850E_UART_ASIM_CL_8	0x04 /* char len is 8 bits (otherwise, 7) */
-#define V850E_UART_ASIM_SL_2	0x02 /* 2 stop bits (otherwise, 1) */
-#define V850E_UART_ASIM_ISRM	0x01 /* generate INTSR interrupt on errors
-					(otherwise, generate INTSER) */
-
-/* UART serial interface status registers.  */
-#define V850E_UART_ASIS(n)	(*(volatile u8 *)V850E_UART_ASIS_ADDR(n))
-/* Control bits for status registers.  */
-#define V850E_UART_ASIS_PE	0x04 /* parity error */
-#define V850E_UART_ASIS_FE	0x02 /* framing error */
-#define V850E_UART_ASIS_OVE	0x01 /* overrun error */
-
-/* UART serial interface transmission status registers.  */
-#define V850E_UART_ASIF(n)	(*(volatile u8 *)V850E_UART_ASIF_ADDR(n))
-#define V850E_UART_ASIF_TXBF	0x02 /* transmit buffer flag (data in TXB) */
-#define V850E_UART_ASIF_TXSF	0x01 /* transmit shift flag (sending data) */
-
-/* UART receive buffer register.  */
-#define V850E_UART_RXB(n)	(*(volatile u8 *)V850E_UART_RXB_ADDR(n))
-
-/* UART transmit buffer register.  */
-#define V850E_UART_TXB(n)	(*(volatile u8 *)V850E_UART_TXB_ADDR(n))
-
-/* UART baud-rate generator control registers.  */
-#define V850E_UART_CKSR(n)	(*(volatile u8 *)V850E_UART_CKSR_ADDR(n))
-#define V850E_UART_CKSR_MAX	11
-#define V850E_UART_BRGC(n)	(*(volatile u8 *)V850E_UART_BRGC_ADDR(n))
-#define V850E_UART_BRGC_MIN	8
-
-
-#ifndef V850E_UART_CKSR_MAX_FREQ
-#define V850E_UART_CKSR_MAX_FREQ (25*1000*1000)
-#endif
-
-/* Calculate the minimum value for CKSR on this processor.  */
-static inline unsigned v850e_uart_cksr_min (void)
-{
-	int min = 0;
-	unsigned freq = V850E_UART_BASE_FREQ;
-	while (freq > V850E_UART_CKSR_MAX_FREQ) {
-		freq >>= 1;
-		min++;
-	}
-	return min;
-}
-
-
-/* Slightly abstract interface used by driver.  */
-
-
-/* Interrupts used by the UART.  */
-
-/* Received when the most recently transmitted character has been sent.  */
-#define V850E_UART_TX_IRQ(chan)		IRQ_INTST (chan)
-/* Received when a new character has been received.  */
-#define V850E_UART_RX_IRQ(chan)		IRQ_INTSR (chan)
-
-
-/* UART clock generator interface.  */
-
-/* This type encapsulates a particular uart frequency.  */
-typedef struct {
-	unsigned clk_divlog2;
-	unsigned brgen_count;
-} v850e_uart_speed_t;
-
-/* Calculate a uart speed from BAUD for this uart.  */
-static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
-{
-	v850e_uart_speed_t speed;
-
-	/* Calculate the log2 clock divider and baud-rate counter values
-	   (note that the UART divides the resulting clock by 2, so
-	   multiply BAUD by 2 here to compensate).  */
-	calc_counter_params (V850E_UART_BASE_FREQ, baud * 2,
-			     v850e_uart_cksr_min(),
-			     V850E_UART_CKSR_MAX, 8/*bits*/,
-			     &speed.clk_divlog2, &speed.brgen_count);
-
-	return speed;
-}
-
-/* Return the current speed of uart channel CHAN.  */
-static inline v850e_uart_speed_t v850e_uart_speed (unsigned chan)
-{
-	v850e_uart_speed_t speed;
-	speed.clk_divlog2 = V850E_UART_CKSR (chan);
-	speed.brgen_count = V850E_UART_BRGC (chan);
-	return speed;
-}
-
-/* Set the current speed of uart channel CHAN.  */
-static inline void v850e_uart_set_speed(unsigned chan,v850e_uart_speed_t speed)
-{
-	V850E_UART_CKSR (chan) = speed.clk_divlog2;
-	V850E_UART_BRGC (chan) = speed.brgen_count;
-}
-
-static inline int
-v850e_uart_speed_eq (v850e_uart_speed_t speed1, v850e_uart_speed_t speed2)
-{
-	return speed1.clk_divlog2 == speed2.clk_divlog2
-		&& speed1.brgen_count == speed2.brgen_count;
-}
-
-/* Minimum baud rate possible.  */
-#define v850e_uart_min_baud() \
-   ((V850E_UART_BASE_FREQ >> V850E_UART_CKSR_MAX) / (2 * 255) + 1)
-
-/* Maximum baud rate possible.  The error is quite high at max, though.  */
-#define v850e_uart_max_baud() \
-   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / (2 *V850E_UART_BRGC_MIN))
-
-/* The `maximum' clock rate the uart can used, which is wanted (though not
-   really used in any useful way) by the serial framework.  */
-#define v850e_uart_max_clock() \
-   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / 2)
-
-
-/* UART configuration interface.  */
-
-/* Type of the uart config register; must be a scalar.  */
-typedef u16 v850e_uart_config_t;
-
-/* The uart hardware config register for channel CHAN.  */
-#define V850E_UART_CONFIG(chan)		V850E_UART_ASIM (chan)
-
-/* This config bit set if the uart is enabled.  */
-#define V850E_UART_CONFIG_ENABLED	V850E_UART_ASIM_CAE
-/* If the uart _isn't_ enabled, store this value to it to do so.  */
-#define V850E_UART_CONFIG_INIT		V850E_UART_ASIM_CAE
-/* Store this config value to disable the uart channel completely.  */
-#define V850E_UART_CONFIG_FINI		0
-
-/* Setting/clearing these bits enable/disable TX/RX, respectively (but
-   otherwise generally leave things running).  */
-#define V850E_UART_CONFIG_RX_ENABLE	V850E_UART_ASIM_RXE
-#define V850E_UART_CONFIG_TX_ENABLE	V850E_UART_ASIM_TXE
-
-/* These masks define which config bits affect TX/RX modes, respectively.  */
-#define V850E_UART_CONFIG_RX_BITS \
-  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_ISRM)
-#define V850E_UART_CONFIG_TX_BITS \
-  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_SL_2)
-
-static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
-{
-	v850e_uart_config_t config = 0;
-
-	/* Figure out new configuration of control register.  */
-	if (cflags & CSTOPB)
-		/* Number of stop bits, 1 or 2.  */
-		config |= V850E_UART_ASIM_SL_2;
-	if ((cflags & CSIZE) == CS8)
-		/* Number of data bits, 7 or 8.  */
-		config |= V850E_UART_ASIM_CL_8;
-	if (! (cflags & PARENB))
-		/* No parity check/generation.  */
-		config |= V850E_UART_ASIM_PS_NONE;
-	else if (cflags & PARODD)
-		/* Odd parity check/generation.  */
-		config |= V850E_UART_ASIM_PS_ODD;
-	else
-		/* Even parity check/generation.  */
-		config |= V850E_UART_ASIM_PS_EVEN;
-	if (cflags & CREAD)
-		/* Reading enabled.  */
-		config |= V850E_UART_ASIM_RXE;
-
-	config |= V850E_UART_ASIM_CAE;
-	config |= V850E_UART_ASIM_TXE; /* Writing is always enabled.  */
-	config |= V850E_UART_ASIM_ISRM; /* Errors generate a read-irq.  */
-
-	return config;
-}
-
-/* This should delay as long as necessary for a recently written config
-   setting to settle, before we turn the uart back on.  */
-static inline void
-v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
-{
-	/* The UART may not be reset properly unless we wait at least 2
-	   `basic-clocks' until turning on the TXE/RXE bits again.
-	   A `basic clock' is the clock used by the baud-rate generator,
-	   i.e., the cpu clock divided by the 2^new_clk_divlog2.
-	   The loop takes 2 insns, so loop CYCLES / 2 times.  */
-	register unsigned count = 1 << speed.clk_divlog2;
-	while (--count != 0)
-		/* nothing */;
-}
-
-
-/* RX/TX interface.  */
-
-/* Return true if all characters awaiting transmission on uart channel N
-   have been transmitted.  */
-#define v850e_uart_xmit_done(n)						      \
-   (! (V850E_UART_ASIF(n) & V850E_UART_ASIF_TXBF))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_done(n)				      \
-   do { } while (! v850e_uart_xmit_done (n))
-
-/* Return true if uart channel N is ready to transmit a character.  */
-#define v850e_uart_xmit_ok(n)						      \
-   (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_ok(n)					      \
-   do { } while (! v850e_uart_xmit_ok (n))
-
-/* Write character CH to uart channel CHAN.  */
-#define v850e_uart_putc(chan, ch)	(V850E_UART_TXB(chan) = (ch))
-
-/* Return latest character read on channel CHAN.  */
-#define v850e_uart_getc(chan)		V850E_UART_RXB (chan)
-
-/* Return bit-mask of uart error status.  */
-#define v850e_uart_err(chan)		V850E_UART_ASIS (chan)
-/* Various error bits set in the error result.  */
-#define V850E_UART_ERR_OVERRUN		V850E_UART_ASIS_OVE
-#define V850E_UART_ERR_FRAME		V850E_UART_ASIS_FE
-#define V850E_UART_ERR_PARITY		V850E_UART_ASIS_PE
-
-
-#endif /* __V850_V850E_UARTA_H__ */
diff --git a/include/asm-v850/v850e_uartb.h b/include/asm-v850/v850e_uartb.h
deleted file mode 100644
index 6d4767d5a83..00000000000
--- a/include/asm-v850/v850e_uartb.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * include/asm-v850/v850e_uartb.h -- V850E on-chip `UARTB' UART
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* The V850E UARTB is basically a superset of the original V850E UART, but
-   even where it's the same, the names and details have changed a bit.
-   It's similar enough to use the same driver (v850e_uart.c), but the
-   details have been abstracted slightly to do so.  */
-
-#ifndef __V850_V850E_UARTB_H__
-#define __V850_V850E_UARTB_H__
-
-
-/* Raw hardware interface.  */
-
-#define V850E_UARTB_BASE_ADDR(n)	(0xFFFFFA00 + 0x10 * (n))
-
-/* Addresses of specific UART control registers for channel N.  */
-#define V850E_UARTB_CTL0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x0)
-#define V850E_UARTB_CTL2_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x2)
-#define V850E_UARTB_STR_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x4)
-#define V850E_UARTB_RX_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x6)
-#define V850E_UARTB_RXAP_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x6)
-#define V850E_UARTB_TX_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x8)
-#define V850E_UARTB_FIC0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xA)
-#define V850E_UARTB_FIC1_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xB)
-#define V850E_UARTB_FIC2_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xC)
-#define V850E_UARTB_FIS0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xE)
-#define V850E_UARTB_FIS1_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xF)
-
-/* UARTB control register 0 (general config).  */
-#define V850E_UARTB_CTL0(n)	(*(volatile u8 *)V850E_UARTB_CTL0_ADDR(n))
-/* Control bits for config registers.  */
-#define V850E_UARTB_CTL0_PWR		0x80	/* clock enable */
-#define V850E_UARTB_CTL0_TXE		0x40	/* transmit enable */
-#define V850E_UARTB_CTL0_RXE		0x20	/* receive enable */
-#define V850E_UARTB_CTL0_DIR		0x10	/*  */
-#define V850E_UARTB_CTL0_PS1		0x08	/* parity */
-#define V850E_UARTB_CTL0_PS0		0x04	/* parity */
-#define V850E_UARTB_CTL0_CL		0x02	/* char len 1:8bit, 0:7bit */
-#define V850E_UARTB_CTL0_SL		0x01	/* stop bit 1:2bit, 0:1bit */
-#define V850E_UARTB_CTL0_PS_MASK	0x0C	/* mask covering parity bits */
-#define V850E_UARTB_CTL0_PS_NONE	0x00	/* no parity */
-#define V850E_UARTB_CTL0_PS_ZERO	0x04	/* zero parity */
-#define V850E_UARTB_CTL0_PS_ODD		0x08	/* odd parity */
-#define V850E_UARTB_CTL0_PS_EVEN	0x0C	/* even parity */
-#define V850E_UARTB_CTL0_CL_8		0x02	/* char len 1:8bit, 0:7bit */
-#define V850E_UARTB_CTL0_SL_2		0x01	/* stop bit 1:2bit, 0:1bit */
-
-/* UARTB control register 2 (clock divider).  */
-#define V850E_UARTB_CTL2(n)	(*(volatile u16 *)V850E_UARTB_CTL2_ADDR(n))
-#define V850E_UARTB_CTL2_MIN	4
-#define V850E_UARTB_CTL2_MAX	0xFFFF
-
-/* UARTB serial interface status register.  */
-#define V850E_UARTB_STR(n)	(*(volatile u8 *)V850E_UARTB_STR_ADDR(n))
-/* Control bits for status registers.  */
-#define V850E_UARTB_STR_TSF	0x80	/* UBTX or FIFO exist data  */
-#define V850E_UARTB_STR_OVF	0x08	/* overflow error */
-#define V850E_UARTB_STR_PE	0x04	/* parity error */
-#define V850E_UARTB_STR_FE	0x02	/* framing error */
-#define V850E_UARTB_STR_OVE	0x01	/* overrun error */
-
-/* UARTB receive data register.  */
-#define V850E_UARTB_RX(n)	(*(volatile u8 *)V850E_UARTB_RX_ADDR(n))
-#define V850E_UARTB_RXAP(n)	(*(volatile u16 *)V850E_UARTB_RXAP_ADDR(n))
-/* Control bits for status registers.  */
-#define V850E_UARTB_RXAP_PEF	0x0200 /* parity error */
-#define V850E_UARTB_RXAP_FEF	0x0100 /* framing error */
-
-/* UARTB transmit data register.  */
-#define V850E_UARTB_TX(n)	(*(volatile u8 *)V850E_UARTB_TX_ADDR(n))
-
-/* UARTB FIFO control register 0.  */
-#define V850E_UARTB_FIC0(n)	(*(volatile u8 *)V850E_UARTB_FIC0_ADDR(n))
-
-/* UARTB FIFO control register 1.  */
-#define V850E_UARTB_FIC1(n)	(*(volatile u8 *)V850E_UARTB_FIC1_ADDR(n))
-
-/* UARTB FIFO control register 2.  */
-#define V850E_UARTB_FIC2(n)	(*(volatile u16 *)V850E_UARTB_FIC2_ADDR(n))
-
-/* UARTB FIFO status register 0.  */
-#define V850E_UARTB_FIS0(n)	(*(volatile u8 *)V850E_UARTB_FIS0_ADDR(n))
-
-/* UARTB FIFO status register 1.  */
-#define V850E_UARTB_FIS1(n)	(*(volatile u8 *)V850E_UARTB_FIS1_ADDR(n))
-
-
-/* Slightly abstract interface used by driver.  */
-
-
-/* Interrupts used by the UART.  */
-
-/* Received when the most recently transmitted character has been sent.  */
-#define V850E_UART_TX_IRQ(chan)		IRQ_INTUBTIT (chan)
-/* Received when a new character has been received.  */
-#define V850E_UART_RX_IRQ(chan)		IRQ_INTUBTIR (chan)
-
-/* Use by serial driver for information purposes.  */
-#define V850E_UART_BASE_ADDR(chan)	V850E_UARTB_BASE_ADDR(chan)
-
-
-/* UART clock generator interface.  */
-
-/* This type encapsulates a particular uart frequency.  */
-typedef u16 v850e_uart_speed_t;
-
-/* Calculate a uart speed from BAUD for this uart.  */
-static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
-{
-	v850e_uart_speed_t speed;
-
-	/*
-	 * V850E/ME2 UARTB baud rate is determined by the value of UBCTL2
-	 * fx = V850E_UARTB_BASE_FREQ = CPU_CLOCK_FREQ/4
-	 * baud = fx / 2*speed   [ speed >= 4 ]
-	 */
-	speed = V850E_UARTB_CTL2_MIN;
-	while (((V850E_UARTB_BASE_FREQ / 2) / speed ) > baud)
-		speed++;
-
-	return speed;
-}
-
-/* Return the current speed of uart channel CHAN.  */
-#define v850e_uart_speed(chan)		    V850E_UARTB_CTL2 (chan)
-
-/* Set the current speed of uart channel CHAN.  */
-#define v850e_uart_set_speed(chan, speed)   (V850E_UARTB_CTL2 (chan) = (speed))
-
-/* Return true if SPEED1 and SPEED2 are the same.  */
-#define v850e_uart_speed_eq(speed1, speed2) ((speed1) == (speed2))
-
-/* Minimum baud rate possible.  */
-#define v850e_uart_min_baud() \
-   ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MAX)
-
-/* Maximum baud rate possible.  The error is quite high at max, though.  */
-#define v850e_uart_max_baud() \
-   ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MIN)
-
-/* The `maximum' clock rate the uart can used, which is wanted (though not
-   really used in any useful way) by the serial framework.  */
-#define v850e_uart_max_clock() \
-   (V850E_UARTB_BASE_FREQ / 2)
-
-
-/* UART configuration interface.  */
-
-/* Type of the uart config register; must be a scalar.  */
-typedef u16 v850e_uart_config_t;
-
-/* The uart hardware config register for channel CHAN.  */
-#define V850E_UART_CONFIG(chan)		V850E_UARTB_CTL0 (chan)
-
-/* This config bit set if the uart is enabled.  */
-#define V850E_UART_CONFIG_ENABLED	V850E_UARTB_CTL0_PWR
-/* If the uart _isn't_ enabled, store this value to it to do so.  */
-#define V850E_UART_CONFIG_INIT		V850E_UARTB_CTL0_PWR
-/* Store this config value to disable the uart channel completely.  */
-#define V850E_UART_CONFIG_FINI		0
-
-/* Setting/clearing these bits enable/disable TX/RX, respectively (but
-   otherwise generally leave things running).  */
-#define V850E_UART_CONFIG_RX_ENABLE	V850E_UARTB_CTL0_RXE
-#define V850E_UART_CONFIG_TX_ENABLE	V850E_UARTB_CTL0_TXE
-
-/* These masks define which config bits affect TX/RX modes, respectively.  */
-#define V850E_UART_CONFIG_RX_BITS \
-  (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8)
-#define V850E_UART_CONFIG_TX_BITS \
-  (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8 | V850E_UARTB_CTL0_SL_2)
-
-static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
-{
-	v850e_uart_config_t config = 0;
-
-	/* Figure out new configuration of control register.  */
-	if (cflags & CSTOPB)
-		/* Number of stop bits, 1 or 2.  */
-		config |= V850E_UARTB_CTL0_SL_2;
-	if ((cflags & CSIZE) == CS8)
-		/* Number of data bits, 7 or 8.  */
-		config |= V850E_UARTB_CTL0_CL_8;
-	if (! (cflags & PARENB))
-		/* No parity check/generation.  */
-		config |= V850E_UARTB_CTL0_PS_NONE;
-	else if (cflags & PARODD)
-		/* Odd parity check/generation.  */
-		config |= V850E_UARTB_CTL0_PS_ODD;
-	else
-		/* Even parity check/generation.  */
-		config |= V850E_UARTB_CTL0_PS_EVEN;
-	if (cflags & CREAD)
-		/* Reading enabled.  */
-		config |= V850E_UARTB_CTL0_RXE;
-
-	config |= V850E_UARTB_CTL0_PWR;
-	config |= V850E_UARTB_CTL0_TXE; /* Writing is always enabled.  */
-	config |= V850E_UARTB_CTL0_DIR; /* LSB first.  */
-
-	return config;
-}
-
-/* This should delay as long as necessary for a recently written config
-   setting to settle, before we turn the uart back on.  */
-static inline void
-v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
-{
-	/* The UART may not be reset properly unless we wait at least 2
-	   `basic-clocks' until turning on the TXE/RXE bits again.
-	   A `basic clock' is the clock used by the baud-rate generator,
-	   i.e., the cpu clock divided by the 2^new_clk_divlog2.
-	   The loop takes 2 insns, so loop CYCLES / 2 times.  */
-	register unsigned count = 1 << speed;
-	while (--count != 0)
-		/* nothing */;
-}
-
-
-/* RX/TX interface.  */
-
-/* Return true if all characters awaiting transmission on uart channel N
-   have been transmitted.  */
-#define v850e_uart_xmit_done(n)						      \
-   (! (V850E_UARTB_STR(n) & V850E_UARTB_STR_TSF))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_done(n)				      \
-   do { } while (! v850e_uart_xmit_done (n))
-
-/* Return true if uart channel N is ready to transmit a character.  */
-#define v850e_uart_xmit_ok(n)						      \
-   (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_ok(n)					      \
-   do { } while (! v850e_uart_xmit_ok (n))
-
-/* Write character CH to uart channel CHAN.  */
-#define v850e_uart_putc(chan, ch)	(V850E_UARTB_TX(chan) = (ch))
-
-/* Return latest character read on channel CHAN.  */
-#define v850e_uart_getc(chan)		V850E_UARTB_RX (chan)
-
-/* Return bit-mask of uart error status.  */
-#define v850e_uart_err(chan)		V850E_UARTB_STR (chan)
-/* Various error bits set in the error result.  */
-#define V850E_UART_ERR_OVERRUN		V850E_UARTB_STR_OVE
-#define V850E_UART_ERR_FRAME		V850E_UARTB_STR_FE
-#define V850E_UART_ERR_PARITY		V850E_UARTB_STR_PE
-
-
-#endif /* __V850_V850E_UARTB_H__ */
diff --git a/include/asm-v850/v850e_utils.h b/include/asm-v850/v850e_utils.h
deleted file mode 100644
index 52eb72822d3..00000000000
--- a/include/asm-v850/v850e_utils.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-v850/v850e_utils.h -- Utility functions associated with
- *	V850E CPUs
- *
- *  Copyright (C) 2001,03  NEC Electronics Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_UTILS_H__
-#define __V850_V850E_UTILS_H__
-
-/* Calculate counter clock-divider and count values to attain the
-   desired frequency RATE from the base frequency BASE_FREQ.  The
-   counter is expected to have a clock-divider, which can divide the
-   system cpu clock by a power of two value from MIN_DIVLOG2 to
-   MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
-   counts up and resets whenever it's equal to the compare register,
-   generating an interrupt or whatever when it does so).  The returned
-   values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
-   -- the counter compare value to use.  Returns true if it was possible
-   to find a reasonable value, otherwise false (and the other return
-   values will be set to be as good as possible).  */
-extern int calc_counter_params (unsigned long base_freq,
-				unsigned long rate,
-				unsigned min_divlog2, unsigned max_divlog2,
-				unsigned counter_size,
-				unsigned *divlog2, unsigned *count);
-
-#endif /* __V850_V850E_UTILS_H__ */
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 8b82974bdc1..6272a395d43 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -286,7 +286,6 @@
 #define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_SPARC	(EM_SPARC)
 #define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_V850		(EM_V850|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 
 #define AUDIT_PERM_EXEC		1
diff --git a/include/linux/module.h b/include/linux/module.h
index fce15ebd0e1..68e09557c95 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -23,7 +23,7 @@
 /* Not Yet Implemented */
 #define MODULE_SUPPORTED_DEVICE(name)
 
-/* v850 toolchain uses a `_' prefix for all user symbols */
+/* some toolchains uses a `_' prefix for all user symbols */
 #ifndef MODULE_SYMBOL_PREFIX
 #define MODULE_SYMBOL_PREFIX ""
 #endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f3a1c0e4502..3b2f6c04855 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -59,9 +59,6 @@
 #define PORT_SUNZILOG	38
 #define PORT_SUNSAB	39
 
-/* NEC v850.  */
-#define PORT_V850E_UART	40
-
 /* DEC */
 #define PORT_DZ		46
 #define PORT_ZS		47
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 0522f368f9d..4394dadff81 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -443,7 +443,7 @@ asmlinkage long sys_newuname(struct new_utsname __user *name);
 
 asmlinkage long sys_getrlimit(unsigned int resource,
 				struct rlimit __user *rlim);
-#if defined(COMPAT_RLIM_OLD_INFINITY) || !(defined(CONFIG_IA64) || defined(CONFIG_V850))
+#if defined(COMPAT_RLIM_OLD_INFINITY) || !(defined(CONFIG_IA64))
 asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim);
 #endif
 asmlinkage long sys_setrlimit(unsigned int resource,
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index dca5e0dd09b..4f8a3007e45 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -520,8 +520,7 @@ int main(int argc, char **argv)
 			genksyms_usage();
 			return 1;
 		}
-	if ((strcmp(arch, "v850") == 0) || (strcmp(arch, "h8300") == 0)
-	    || (strcmp(arch, "blackfin") == 0))
+	if ((strcmp(arch, "h8300") == 0) || (strcmp(arch, "blackfin") == 0))
 		mod_prefix = "_";
 	{
 		extern int yydebug;
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 1fcaf3284a6..4fa1f3ad251 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -623,7 +623,7 @@ static int do_i2c_entry(const char *filename, struct i2c_device_id *id,
 	return 1;
 }
 
-/* Ignore any prefix, eg. v850 prepends _ */
+/* Ignore any prefix, eg. some architectures prepend _ */
 static inline int sym_is(const char *symbol, const char *name)
 {
 	const char *match;
diff --git a/scripts/mod/mk_elfconfig.c b/scripts/mod/mk_elfconfig.c
index db3881f14c2..6a96d47bd1e 100644
--- a/scripts/mod/mk_elfconfig.c
+++ b/scripts/mod/mk_elfconfig.c
@@ -55,7 +55,7 @@ main(int argc, char **argv)
 	else
 		exit(1);
 
-	if ((strcmp(argv[1], "v850") == 0) || (strcmp(argv[1], "h8300") == 0)
+	if ((strcmp(argv[1], "h8300") == 0)
 	    || (strcmp(argv[1], "blackfin") == 0))
 		printf("#define MODULE_SYMBOL_PREFIX \"_\"\n");
 	else
-- 
cgit v1.2.3


From 82736f4d1d2b7063b829cc93171a6e5aea8a9c49 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <Uwe.Kleine-Koenig@digi.com>
Date: Wed, 23 Jul 2008 21:28:54 -0700
Subject: generic irqs: handle failure of irqchip->set_type in setup_irq
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

set_type returns an int indicating success or failure, but up to now
setup_irq ignores that.

In my case this resulted in a machine hang:

gpio-keys requested IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, but
arm/ns9xxx can only trigger on one direction so set_type didn't touch
the configuration which happens do default to a level sensitiveness and
returned -EINVAL.  setup_irq ignored that and unmasked the irq.  This
resulted in an endless triggering of the gpio-key interrupt service
routine which effectively killed the machine.

With this patch applied setup_irq propagates the error to the caller.

Note that before in the case

	chip && !chip->set_type && !chip->name

a NULL pointer was feed to printk.  This is fixed, too.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/irq/manage.c | 64 +++++++++++++++++++++++++++++++++++------------------
 1 file changed, 42 insertions(+), 22 deletions(-)

diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 3cfc0fefb5e..5bc6e5ecc49 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -308,6 +308,30 @@ void compat_irq_chip_set_default_handler(struct irq_desc *desc)
 		desc->handle_irq = NULL;
 }
 
+static int __irq_set_trigger(struct irq_chip *chip, unsigned int irq,
+		unsigned long flags)
+{
+	int ret;
+
+	if (!chip || !chip->set_type) {
+		/*
+		 * IRQF_TRIGGER_* but the PIC does not support multiple
+		 * flow-types?
+		 */
+		pr_warning("No set_type function for IRQ %d (%s)\n", irq,
+				chip ? (chip->name ? : "unknown") : "unknown");
+		return 0;
+	}
+
+	ret = chip->set_type(irq, flags & IRQF_TRIGGER_MASK);
+
+	if (ret)
+		pr_err("setting flow type for irq %u failed (%pF)\n",
+				irq, chip->set_type);
+
+	return ret;
+}
+
 /*
  * Internal function to register an irqaction - typically used to
  * allocate special interrupts that are part of the architecture.
@@ -319,6 +343,7 @@ int setup_irq(unsigned int irq, struct irqaction *new)
 	const char *old_name = NULL;
 	unsigned long flags;
 	int shared = 0;
+	int ret;
 
 	if (irq >= NR_IRQS)
 		return -EINVAL;
@@ -376,35 +401,23 @@ int setup_irq(unsigned int irq, struct irqaction *new)
 		shared = 1;
 	}
 
-	*p = new;
-
-	/* Exclude IRQ from balancing */
-	if (new->flags & IRQF_NOBALANCING)
-		desc->status |= IRQ_NO_BALANCING;
-
 	if (!shared) {
 		irq_chip_set_defaults(desc->chip);
 
-#if defined(CONFIG_IRQ_PER_CPU)
-		if (new->flags & IRQF_PERCPU)
-			desc->status |= IRQ_PER_CPU;
-#endif
-
 		/* Setup the type (level, edge polarity) if configured: */
 		if (new->flags & IRQF_TRIGGER_MASK) {
-			if (desc->chip->set_type)
-				desc->chip->set_type(irq,
-						new->flags & IRQF_TRIGGER_MASK);
-			else
-				/*
-				 * IRQF_TRIGGER_* but the PIC does not support
-				 * multiple flow-types?
-				 */
-				printk(KERN_WARNING "No IRQF_TRIGGER set_type "
-				       "function for IRQ %d (%s)\n", irq,
-				       desc->chip->name);
+			ret = __irq_set_trigger(desc->chip, irq, new->flags);
+
+			if (ret) {
+				spin_unlock_irqrestore(&desc->lock, flags);
+				return ret;
+			}
 		} else
 			compat_irq_chip_set_default_handler(desc);
+#if defined(CONFIG_IRQ_PER_CPU)
+		if (new->flags & IRQF_PERCPU)
+			desc->status |= IRQ_PER_CPU;
+#endif
 
 		desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
 				  IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
@@ -423,6 +436,13 @@ int setup_irq(unsigned int irq, struct irqaction *new)
 		/* Set default affinity mask once everything is setup */
 		irq_select_affinity(irq);
 	}
+
+	*p = new;
+
+	/* Exclude IRQ from balancing */
+	if (new->flags & IRQF_NOBALANCING)
+		desc->status |= IRQ_NO_BALANCING;
+
 	/* Reset broken irq detection when installing new handler */
 	desc->irq_count = 0;
 	desc->irqs_unhandled = 0;
-- 
cgit v1.2.3


From 5aa0769d089125e63f8dc23e0283e559e1790493 Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Wed, 23 Jul 2008 21:28:55 -0700
Subject: atmel_pwm: set up only one PWM clock when allocating a clock

This patch will only setup one clock, if free, and return this clock to the
caller.  The previous solution would setup both clocks with the same prescaler
and divider and return PWM_CPR_CLKB, thus taking both clocks in the same call
without the caller knowing.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/atmel_pwm.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c
index 5b5a14dab3d..6aa5294dfec 100644
--- a/drivers/misc/atmel_pwm.c
+++ b/drivers/misc/atmel_pwm.c
@@ -211,8 +211,7 @@ int pwm_clk_alloc(unsigned prescale, unsigned div)
 	if ((mr & 0xffff) == 0) {
 		mr |= val;
 		ret = PWM_CPR_CLKA;
-	}
-	if ((mr & (0xffff << 16)) == 0) {
+	} else if ((mr & (0xffff << 16)) == 0) {
 		mr |= val << 16;
 		ret = PWM_CPR_CLKB;
 	}
-- 
cgit v1.2.3


From 6cbb2e711128b505209f7c910018aac77335c887 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:28:55 -0700
Subject: checkpatch: Version: 0.20

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 6971bf078d1..66f060ecb81 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -9,7 +9,7 @@ use strict;
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.19';
+my $V = '0.20';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
-- 
cgit v1.2.3


From fee61c47d15270bdea699a8a3dd867f0825c3541 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:28:56 -0700
Subject: checkpatch: return is not a function -- parentheses for casts are ok
 too

Casts require parentheses so it is possible to have something like this:

	return (int)(*a);

This miss trips the complexity function.  Ensure that the two separate
parenthesised sections are not coelesced.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 1 +
 1 file changed, 1 insertion(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 66f060ecb81..83ae37b3862 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1670,6 +1670,7 @@ sub process {
 			my $value = $2;
 
 			# Flatten any parentheses and braces
+			$value =~ s/\)\(/\) \(/g;
 			while ($value =~ s/\([^\(\)]*\)/1/) {
 			}
 
-- 
cgit v1.2.3


From c8cb2ca37ed51aa1f3b20e3eff1e72df1c400f70 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:28:57 -0700
Subject: checkpatch: types: some types may also be identifiers

Some types such as typedefs may overlap real identifiers.  Be more
targetted about when a type can really exist.  Where it cannot let it be
an identifier.  This prevents false reporting of the minus '-' in unary
context in the following:

	foo[bar->bool - 1];

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 83ae37b3862..5420db6502f 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -171,6 +171,7 @@ our @modifierList = (
 sub build_types {
 	my $mods = "(?:  \n" . join("|\n  ", @modifierList) . "\n)";
 	my $all = "(?:  \n" . join("|\n  ", @typeList) . "\n)";
+	$Modifier	= qr{(?:$Attribute|$Sparse|$mods)};
 	$NonptrType	= qr{
 			(?:const\s+)?
 			(?:$mods\s+)?
@@ -178,15 +179,14 @@ sub build_types {
 				(?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
 				(?:${all}\b)
 			)
-			(?:\s+$Sparse|\s+const)*
+			(?:\s+$Modifier|\s+const)*
 		  }x;
 	$Type	= qr{
 			$NonptrType
 			(?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
-			(?:\s+$Inline|\s+$Sparse|\s+$Attribute|\s+$mods)*
+			(?:\s+$Inline|\s+$Modifier)*
 		  }x;
 	$Declare	= qr{(?:$Storage\s+)?$Type};
-	$Modifier	= qr{(?:$Attribute|$Sparse|$mods)};
 }
 build_types();
 
@@ -715,7 +715,7 @@ sub annotate_values {
 				$av_preprocessor = 0;
 			}
 
-		} elsif ($cur =~ /^($Type)/) {
+		} elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\))/) {
 			print "DECLARE($1)\n" if ($dbg_values > 1);
 			$type = 'T';
 
@@ -800,8 +800,9 @@ sub annotate_values {
 				print "PAREN('$1')\n" if ($dbg_values > 1);
 			}
 
-		} elsif ($cur =~ /^($Ident)\(/o) {
+		} elsif ($cur =~ /^($Ident)\s*\(/o) {
 			print "FUNC($1)\n" if ($dbg_values > 1);
+			$type = 'V';
 			$av_pending = 'V';
 
 		} elsif ($cur =~ /^($Ident|$Constant)/o) {
-- 
cgit v1.2.3


From f3db6639fee577f6ed92c0a1fc881e748c47ec48 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 23 Jul 2008 21:28:57 -0700
Subject: checkpatch: add a checkpatch warning for new uses of __initcall().

[apw@shadowen.org: generalise pattern and add tests]
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 5420db6502f..cf70f123f57 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2108,6 +2108,10 @@ sub process {
 		if ($line =~ /\bsimple_(strto.*?)\s*\(/) {
 			WARN("consider using strict_$1 in preference to simple_$1\n" . $herecurr);
 		}
+# check for __initcall(), use device_initcall() explicitly please
+		if ($line =~ /^.\s*__initcall\s*\(/) {
+			WARN("please use device_initcall() instead of __initcall()\n" . $herecurr);
+		}
 
 # use of NR_CPUS is usually wrong
 # ignore definitions of NR_CPUS and usage to define arrays as likely right
-- 
cgit v1.2.3


From d3ddcf471ea90d7ff711dbaa371ef379ed625ec0 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:28:58 -0700
Subject: checkpatch: possible types: __asm__ is never a type

We are false matching __asm__ as a type, and then tripping the external
function checks.  Squash.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index cf70f123f57..fd597a4b5da 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -846,7 +846,7 @@ sub possible {
 	if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
 	    $possible ne 'goto' && $possible ne 'return' &&
 	    $possible ne 'case' && $possible ne 'else' &&
-	    $possible ne 'asm' &&
+	    $possible ne 'asm' && $possible ne '__asm__' &&
 	    $possible !~ /^(typedef|struct|enum)\b/) {
 		# Check for modifiers.
 		$possible =~ s/\s*$Storage\s*//g;
-- 
cgit v1.2.3


From beae6332493a40116dba24928154621f2e88b9a9 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:28:59 -0700
Subject: checkpatch: comment detection: ignore macro continuation when
 detecting associated comments

When looking for an associated comment they may be suffixed by a macro
continuation.  Ignore this.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index fd597a4b5da..94250d1a3a4 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -631,7 +631,7 @@ sub ctx_locate_comment {
 	my ($first_line, $end_line) = @_;
 
 	# Catch a comment on the end of the line itself.
-	my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*$@);
+	my ($current_comment) = ($rawlines[$end_line - 1] =~ m@.*(/\*.*\*/)\s*(?:\\\s*)?$@);
 	return $current_comment if (defined $current_comment);
 
 	# Look through the context and try and figure out if there is a
-- 
cgit v1.2.3


From 6ef9b297f6e8850da3be9c9ff5f00385c0977004 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:28:59 -0700
Subject: checkpatch: types: unary -- goto introduces unary context

When we see a goto we enter unary context.  For example:

	goto *h;

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 94250d1a3a4..b2b0648ee14 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -780,7 +780,7 @@ sub annotate_values {
 			$av_pending = 'N';
 			$type = 'N';
 
-		} elsif ($cur =~/^(return|case|else)/o) {
+		} elsif ($cur =~/^(return|case|else|goto)/o) {
 			print "KEYWORD($1)\n" if ($dbg_values > 1);
 			$type = 'N';
 
-- 
cgit v1.2.3


From a3bb97a7aba36055d476896ed6393ab35a119d5b Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:00 -0700
Subject: checkpatch: macros: fix statement counting block end detection

We are incorrectly counting the lines in a block while accumulating
the trailing lines in a macro statement, leading to false positives.
Fix end of block handling and general counting for negative context lines.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index b2b0648ee14..add86862325 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -470,7 +470,9 @@ sub ctx_statement_block {
 		}
 		$off++;
 	}
+	# We are truly at the end, so shuffle to the next line.
 	if ($off == $len) {
+		$loff = $len + 1;
 		$line++;
 		$remain--;
 	}
@@ -1793,30 +1795,26 @@ sub process {
 				$lines[$ln - 1] =~ /^(?:-|..*\\$)/)
 			{
 				$ctx .= $rawlines[$ln - 1] . "\n";
+				$cnt-- if ($lines[$ln - 1] !~ /^-/);
 				$ln++;
-				$cnt--;
 			}
 			$ctx .= $rawlines[$ln - 1];
 
 			($dstat, $dcond, $ln, $cnt, $off) =
 				ctx_statement_block($linenr, $ln - $linenr + 1, 0);
 			#print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
-			#print "LINE<$lines[$ln]> len<" . length($lines[$ln]) . "\n";
+			#print "LINE<$lines[$ln-1]> len<" . length($lines[$ln-1]) . "\n";
 
 			# Extract the remainder of the define (if any) and
 			# rip off surrounding spaces, and trailing \'s.
 			$rest = '';
-			if (defined $lines[$ln - 1] &&
-			    $off > length($lines[$ln - 1]))
-			{
-				$ln++;
-				$cnt--;
-				$off = 0;
-			}
-			while ($cnt > 0) {
-				$rest .= substr($lines[$ln - 1], $off) . "\n";
+			while ($off != 0 || ($cnt > 0 && $rest =~ /(?:^|\\)\s*$/)) {
+				#print "ADDING $off <" . substr($lines[$ln - 1], $off) . ">\n";
+				if ($off != 0 || $lines[$ln - 1] !~ /^-/) {
+					$rest .= substr($lines[$ln - 1], $off) . "\n";
+					$cnt--;
+				}
 				$ln++;
-				$cnt--;
 				$off = 0;
 			}
 			$rest =~ s/\\\n.//g;
@@ -1847,6 +1845,7 @@ sub process {
 				DEFINE_PER_CPU|
 				__typeof__\(
 			}x;
+			#print "REST<$rest>\n";
 			if ($rest ne '') {
 				if ($rest !~ /while\s*\(/ &&
 				    $dstat !~ /$exceptions/)
-- 
cgit v1.2.3


From 548596d523d83dff5a670beb84be0daf4c3bcd16 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:01 -0700
Subject: checkpatch: trailing statement indent: fix end of statement location

Fix end of statement location.  Where the last line of the statement is
replaced we are miss reporting the newly added replacement an incorrectly
indented trailing statement for the negative context.  We are also
incorrectly reporting negative statements generally.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index add86862325..89177c349f9 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1249,17 +1249,22 @@ sub process {
 			my $pre_ctx = "$1$2";
 
 			my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
-			my $ctx_ln = $linenr + $#ctx + 1;
 			my $ctx_cnt = $realcnt - $#ctx - 1;
 			my $ctx = join("\n", @ctx);
 
-			##warn "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
+			my $ctx_ln = $linenr;
+			my $ctx_skip = $realcnt;
 
-			# Skip over any removed lines in the context following statement.
-			while (defined($lines[$ctx_ln - 1]) && $lines[$ctx_ln - 1] =~ /^-/) {
+			while ($ctx_skip > $ctx_cnt || ($ctx_skip == $ctx_cnt &&
+					defined $lines[$ctx_ln - 1] &&
+					$lines[$ctx_ln - 1] =~ /^-/)) {
+				##print "SKIP<$ctx_skip> CNT<$ctx_cnt>\n";
+				$ctx_skip-- if (!defined $lines[$ctx_ln - 1] || $lines[$ctx_ln - 1] !~ /^-/);
 				$ctx_ln++;
 			}
-			##warn "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
+
+			##print "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
+			##print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
 
 			if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
 				ERROR("that open brace { should be on the previous line\n" .
-- 
cgit v1.2.3


From f4c014c0dede10cc0a8463e748892e738e190699 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:01 -0700
Subject: checkpatch: allow printk strings to exceed 80 characters to maintain
 their searchability

Allow printk strings to break the 80 character width limits, thus keeping
them complete and searchable.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 89177c349f9..614999f29aa 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1138,7 +1138,9 @@ sub process {
 		}
 #80 column limit
 		if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
-		    $rawline !~ /^.\s*\*\s*\@$Ident\s/ && $length > 80)
+		    $rawline !~ /^.\s*\*\s*\@$Ident\s/ &&
+		    $line !~ /^\+\s*printk\s*\(\s*(?:KERN_\S+\s*)?"[X\t]*"\s*(?:,|\)\s*;)\s*$/ &&
+		    $length > 80)
 		{
 			WARN("line over 80 characters\n" . $herecurr);
 		}
-- 
cgit v1.2.3


From e2a763c20b89890d2153551b1af6962b135de4c0 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:02 -0700
Subject: checkpatch: switch -- report trailing statements on case and default

Report trailing statements on case and default lines.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 614999f29aa..5f71b305025 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1244,6 +1244,10 @@ sub process {
 				ERROR("switch and case should be at the same indent\n$hereline$err");
 			}
 		}
+		if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g &&
+		    $line !~ /\G(?:\s*{)?(?:\s*$;*)(?:\s*\\)?\s*$/g) {
+			ERROR("trailing statements should be on next line\n" . $herecurr);
+		}
 
 # if/while/etc brace do not go on next line, unless defining a do while loop,
 # or if that brace on the next line is for something else
-- 
cgit v1.2.3


From 8d31cfcecf67563d70cd68616cb8fb4384f24b51 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:02 -0700
Subject: checkpatch: check spacing for square brackets

Check on the spacing before square brackets.  We should only allow spaces
there if this is part of a type definition or an initialialiser.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 5f71b305025..e7c8ab1b54b 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1435,6 +1435,17 @@ sub process {
 			ERROR("open brace '{' following $1 go on the same line\n" . $hereprev);
 		}
 
+# check for spacing round square brackets; allowed:
+#  1. with a type on the left -- int [] a;
+#  2. at the beginning of a line for slice initialisers -- [0..10] = 5,
+		while ($line =~ /(.*?\s)\[/g) {
+			my ($where, $prefix) = ($-[1], $1);
+			if ($prefix !~ /$Type\s+$/ &&
+			    ($where != 0 || $prefix !~ /^.\s+$/)) {
+				ERROR("space prohibited before open square bracket '['\n" . $herecurr);
+			}
+		}
+
 # check for spaces between functions and their parentheses.
 		while ($line =~ /($Ident)\s+\(/g) {
 			my $name = $1;
-- 
cgit v1.2.3


From 53210168feeff9a3c780bd42f69936d4c12381d5 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:03 -0700
Subject: checkpatch: toughen trailing if statement checks and extend them to
 while and for

Extend the trailing statement checks to report a trailing semi-colon ';'
as we really want it on the next line and indented so it is really really
obvious.  Also extend the tests to include while and for.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index e7c8ab1b54b..8616baee0ae 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1269,8 +1269,8 @@ sub process {
 				$ctx_ln++;
 			}
 
-			##print "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
-			##print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
+			#print "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
+			#print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
 
 			if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
 				ERROR("that open brace { should be on the previous line\n" .
@@ -1713,7 +1713,7 @@ sub process {
 		}
 
 # Check for illegal assignment in if conditional.
-		if ($line =~ /\bif\s*\(/) {
+		if ($line =~ /\b(?:if|while|for)\s*\(/ && $line !~ /^.\s*#/) {
 			my ($s, $c) = ($stat, $cond);
 
 			if ($c =~ /\bif\s*\(.*[^<>!=]=[^=].*/) {
@@ -1725,8 +1725,8 @@ sub process {
 			substr($s, 0, length($c), '');
 			$s =~ s/\n.*//g;
 			$s =~ s/$;//g; 	# Remove any comments
-			if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
-			    $c !~ /^.\s*\#\s*if/)
+			if (length($c) && $s !~ /^\s*{?\s*\\*\s*$/ &&
+			    $c !~ /}\s*while\s*/)
 			{
 				ERROR("trailing statements should be on next line\n" . $herecurr);
 			}
-- 
cgit v1.2.3


From f5fe35dd95549b1b419cdeb2ec3fe61fda94fa93 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:03 -0700
Subject: checkpatch: condition/loop indent checks

Check to see if the block/statement which a condition or loop introduces
is indented correctly.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 59 +++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 55 insertions(+), 4 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 8616baee0ae..13d7a330b5d 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1167,10 +1167,10 @@ sub process {
 		}
 
 # Check for potential 'bare' types
-		my ($stat, $cond);
+		my ($stat, $cond, $line_nr_next, $remain_next);
 		if ($realcnt && $line =~ /.\s*\S/) {
-			($stat, $cond) = ctx_statement_block($linenr,
-								$realcnt, 0);
+			($stat, $cond, $line_nr_next, $remain_next) =
+				ctx_statement_block($linenr, $realcnt, 0);
 			$stat =~ s/\n./\n /g;
 			$cond =~ s/\n./\n /g;
 
@@ -1712,7 +1712,8 @@ sub process {
 			ERROR("space required before the open parenthesis '('\n" . $herecurr);
 		}
 
-# Check for illegal assignment in if conditional.
+# Check for illegal assignment in if conditional -- and check for trailing
+# statements after the conditional.
 		if ($line =~ /\b(?:if|while|for)\s*\(/ && $line !~ /^.\s*#/) {
 			my ($s, $c) = ($stat, $cond);
 
@@ -1732,6 +1733,56 @@ sub process {
 			}
 		}
 
+# Check relative indent for conditionals and blocks.
+		if ($line =~ /\b(?:(?:if|while|for)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) {
+			my ($s, $c) = ($stat, $cond);
+
+			substr($s, 0, length($c), '');
+
+			# Make sure we remove the line prefixes as we have
+			# none on the first line, and are going to readd them
+			# where necessary.
+			$s =~ s/\n./\n/gs;
+
+			# We want to check the first line inside the block
+			# starting at the end of the conditional, so remove:
+			#  1) any blank line termination
+			#  2) any opening brace { on end of the line
+			#  3) any do (...) {
+			my $continuation = 0;
+			my $check = 0;
+			$s =~ s/^.*\bdo\b//;
+			$s =~ s/^\s*{//;
+			if ($s =~ s/^\s*\\//) {
+				$continuation = 1;
+			}
+			if ($s =~ s/^\s*\n//) {
+				$check = 1;
+			}
+
+			# Also ignore a loop construct at the end of a
+			# preprocessor statement.
+			if (($prevline =~ /^.\s*#\s*define\s/ ||
+			    $prevline =~ /\\\s*$/) && $continuation == 0) {
+				$check = 0;
+			}
+
+			# Ignore the current line if its is a preprocessor
+			# line.
+			if ($s =~ /^\s*#\s*/) {
+				$check = 0;
+			}
+
+			my (undef, $sindent) = line_stats("+" . $s);
+
+			##print "line<$line> prevline<$prevline> indent<$indent> sindent<$sindent> check<$check> continuation<$continuation> s<$s>\n";
+
+			if ($check && (($sindent % 8) != 0 ||
+			    ($sindent <= $indent && $s ne ''))) {
+				WARN("suspect code indent for conditional statements\n" . $herecurr);
+			}
+		}
+
 # Check for bitwise tests written as boolean
 		if ($line =~ /
 			(?:
-- 
cgit v1.2.3


From 4c432a8f0134504814aa8dcce6cc57c89d175604 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 23 Jul 2008 21:29:04 -0700
Subject: checkpatch: usb_free_urb() can take NULL

usb_free_urb() can take a NULL, so let's check and warn about that.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 13d7a330b5d..a4e8087a0ca 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2078,6 +2078,13 @@ sub process {
 				WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev);
 			}
 		}
+# check for needless usb_free_urb() checks
+		if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
+			my $expr = $1;
+			if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) {
+				WARN("usb_free_urb(NULL) is safe this check is probably not required\n" . $hereprev);
+			}
+		}
 
 # warn about #ifdefs in C files
 #		if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
-- 
cgit v1.2.3


From 3c232147a7d5b0418b0a0bae0e5b9a62fb81f4f2 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Wed, 23 Jul 2008 21:29:05 -0700
Subject: checkpatch: correct spelling in kfree checks

Correct spelling in the kfree reports.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index a4e8087a0ca..3961e759a25 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2075,7 +2075,7 @@ sub process {
 		if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
 			my $expr = $1;
 			if ($line =~ /\bkfree\(\Q$expr\E\);/) {
-				WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev);
+				WARN("kfree(NULL) is safe this check is probably not required\n" . $hereprev);
 			}
 		}
 # check for needless usb_free_urb() checks
-- 
cgit v1.2.3


From 389a2fe57ffc59a649bea39db4d7e6d2eff2b562 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:05 -0700
Subject: checkpatch: allow for type modifiers on multiple declarations

Allow for type modifiers mid declaration on multiple declarations:

	struct mxser_mstatus ms, __user *msu = argp;

Reported by Jiri Slaby.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 3961e759a25..bcfb8ef00fe 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -721,6 +721,10 @@ sub annotate_values {
 			print "DECLARE($1)\n" if ($dbg_values > 1);
 			$type = 'T';
 
+		} elsif ($cur =~ /^($Modifier)\s*/) {
+			print "MODIFIER($1)\n" if ($dbg_values > 1);
+			$type = 'T';
+
 		} elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) {
 			print "DEFINE($1,$2)\n" if ($dbg_values > 1);
 			$av_preprocessor = 1;
-- 
cgit v1.2.3


From 7429c6903e3628fc2cfea65ec7e13bac030c7bfe Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:06 -0700
Subject: checkpatch: improve type matcher debug

Improve type matcher debug so we can see what it does match.  As part
of this move us to to using the common debug framework.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index bcfb8ef00fe..077a2ca3304 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -17,7 +17,6 @@ my $quiet = 0;
 my $tree = 1;
 my $chk_signoff = 1;
 my $chk_patch = 1;
-my $tst_type = 0;
 my $tst_only;
 my $emacs = 0;
 my $terse = 0;
@@ -44,7 +43,6 @@ GetOptions(
 	'summary-file!'	=> \$summary_file,
 
 	'debug=s'	=> \%debug,
-	'test-type!'	=> \$tst_type,
 	'test-only=s'	=> \$tst_only,
 ) or exit;
 
@@ -67,6 +65,7 @@ if ($#ARGV < 0) {
 
 my $dbg_values = 0;
 my $dbg_possible = 0;
+my $dbg_type = 0;
 for my $key (keys %debug) {
 	eval "\${dbg_$key} = '$debug{$key}';"
 }
@@ -1307,8 +1306,12 @@ sub process {
 		if ($line=~/^[^\+]/) {next;}
 
 # TEST: allow direct testing of the type matcher.
-		if ($tst_type && $line =~ /^.$Declare$/) {
-			ERROR("TEST: is type $Declare\n" . $herecurr);
+		if ($dbg_type) {
+			if ($line =~ /^.\s*$Declare\s*$/) {
+				ERROR("TEST: is type\n" . $herecurr);
+			} elsif ($dbg_type > 1 && $line =~ /^.+($Declare)/) {
+				ERROR("TEST: is not type ($1 is)\n". $herecurr);
+			}
 			next;
 		}
 
-- 
cgit v1.2.3


From d2172eb5bd4b7d06577113ec40635083619ca54a Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:07 -0700
Subject: checkpatch: possible modifiers are not being correctly matched

Although we are finding the added modifier in the declaration below
we are not correctly matching it as a type.  Fix the declaration.

    static void __ref *vmem_alloc_pages(unsigned int order)
    {
    }

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 077a2ca3304..53ec3946670 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -168,12 +168,11 @@ our @modifierList = (
 );
 
 sub build_types {
-	my $mods = "(?:  \n" . join("|\n  ", @modifierList) . "\n)";
-	my $all = "(?:  \n" . join("|\n  ", @typeList) . "\n)";
+	my $mods = "(?x:  \n" . join("|\n  ", @modifierList) . "\n)";
+	my $all = "(?x:  \n" . join("|\n  ", @typeList) . "\n)";
 	$Modifier	= qr{(?:$Attribute|$Sparse|$mods)};
 	$NonptrType	= qr{
-			(?:const\s+)?
-			(?:$mods\s+)?
+			(?:$Modifier\s+|const\s+)*
 			(?:
 				(?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
 				(?:${all}\b)
-- 
cgit v1.2.3


From b8f96a31f38c8e9fc75f0a89c6815e7cbc402858 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:07 -0700
Subject: checkpatch: macro complexity checks are meaningless in linker scripts

Exclude vmlinux.lds.h from the macro complexity checks.  They will never
apply sanely here.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 53ec3946670..775f2b146aa 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1860,7 +1860,8 @@ sub process {
 # multi-statement macros should be enclosed in a do while loop, grab the
 # first statement and ensure its the whole macro if its not enclosed
 # in a known good container
-		if ($line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
+		if ($realfile !~ m@/vmlinux.lds.h$@ &&
+		    $line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
 			my $ln = $linenr;
 			my $cnt = $realcnt;
 			my ($off, $dstat, $dcond, $rest);
-- 
cgit v1.2.3


From 8ea3eb9a20f39d5afa52900a34092b4b5f6b55cb Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:08 -0700
Subject: checkpatch: handle return types of pointers to functions

Make sure we correctly mark the return type of the pointer to a function
declaration.

    const void *(*sb_tag)(struct sysfs_tag_info *info);

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 775f2b146aa..6d07b6778c9 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -715,7 +715,7 @@ sub annotate_values {
 				$av_preprocessor = 0;
 			}
 
-		} elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\))/) {
+		} elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\()/) {
 			print "DECLARE($1)\n" if ($dbg_values > 1);
 			$type = 'T';
 
-- 
cgit v1.2.3


From 0221f55c142b0ac8baf6f0b6c4e1ec89f0c98e96 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:08 -0700
Subject: checkpatch: possible types -- known modifiers cannot be types

Ensure we do not inadvertantly load known modifiers up as possible types.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 6d07b6778c9..9c209165f25 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -847,7 +847,7 @@ sub possible {
 	my ($possible, $line) = @_;
 
 	print "CHECK<$possible> ($line)\n" if ($dbg_possible > 1);
-	if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
+	if ($possible !~ /^(?:$Modifier|$Storage|$Type|DEFINE_\S+)$/ &&
 	    $possible ne 'goto' && $possible ne 'return' &&
 	    $possible ne 'case' && $possible ne 'else' &&
 	    $possible ne 'asm' && $possible ne '__asm__' &&
-- 
cgit v1.2.3


From d2506586586c59f5db0e2ce00d5d31ccec6260b8 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:09 -0700
Subject: checkpatch: possible modifiers -- handle multiple modifiers and
 trailing

Add support for multiple modifiers such as:

	int __one __two foo;

Also handle trailing known modifiers when defecting modifiers:

	int __one foo __read_mostly;

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 9c209165f25..8a3b0fd67ad 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -859,8 +859,10 @@ sub possible {
 
 		} elsif ($possible =~ /\s/) {
 			$possible =~ s/\s*$Type\s*//g;
-			warn "MODIFIER: $possible ($line)\n" if ($dbg_possible);
-			push(@modifierList, $possible);
+			for my $modifier (split(' ', $possible)) {
+				warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
+				push(@modifierList, $modifier);
+			}
 
 		} else {
 			warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
@@ -1186,7 +1188,7 @@ sub process {
 			} elsif ($s =~ /^.\s*$Ident\s*\(/s) {
 
 			# declarations always start with types
-			} elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))\s*(?:;|=|,|\()/s) {
+			} elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+?)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))(?:\s*$Modifier)?\s*(?:;|=|,|\()/s) {
 				my $type = $1;
 				$type =~ s/\s+/ /g;
 				possible($type, "A:" . $s);
-- 
cgit v1.2.3


From 1f65f947a6a875e1fe7867dc08e981c4101d435d Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:10 -0700
Subject: checkpatch: add checks for question mark and colon spacing

Add checks for the question mark colon operator spacing, and also check
the other uses of colon.  Colon means a number of things:

 - it introduces the else part of the ?: operator,
 - it terminates a goto label,
 - it terminates the case value,
 - it separates the identifier from the bit size on bit fields, and
 - it is used to introduce option types in asm().

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 81 +++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 72 insertions(+), 9 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 8a3b0fd67ad..88027f237cd 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -689,17 +689,20 @@ sub cat_vet {
 my $av_preprocessor = 0;
 my $av_pending;
 my @av_paren_type;
+my $av_pend_colon;
 
 sub annotate_reset {
 	$av_preprocessor = 0;
 	$av_pending = '_';
 	@av_paren_type = ('E');
+	$av_pend_colon = 'O';
 }
 
 sub annotate_values {
 	my ($stream, $type) = @_;
 
 	my $res;
+	my $var = '_' x length($stream);
 	my $cur = $stream;
 
 	print "$stream\n" if ($dbg_values > 1);
@@ -784,7 +787,12 @@ sub annotate_values {
 			$av_pending = 'N';
 			$type = 'N';
 
-		} elsif ($cur =~/^(return|case|else|goto)/o) {
+		} elsif ($cur =~/^(case)/o) {
+			print "CASE($1)\n" if ($dbg_values > 1);
+			$av_pend_colon = 'C';
+			$type = 'N';
+
+		} elsif ($cur =~/^(return|else|goto)/o) {
 			print "KEYWORD($1)\n" if ($dbg_values > 1);
 			$type = 'N';
 
@@ -809,6 +817,15 @@ sub annotate_values {
 			$type = 'V';
 			$av_pending = 'V';
 
+		} elsif ($cur =~ /^($Ident\s*):/) {
+			if ($type eq 'E') {
+				$av_pend_colon = 'L';
+			} elsif ($type eq 'T') {
+				$av_pend_colon = 'B';
+			}
+			print "IDENT_COLON($1,$type>$av_pend_colon)\n" if ($dbg_values > 1);
+			$type = 'V';
+
 		} elsif ($cur =~ /^($Ident|$Constant)/o) {
 			print "IDENT($1)\n" if ($dbg_values > 1);
 			$type = 'V';
@@ -820,8 +837,24 @@ sub annotate_values {
 		} elsif ($cur =~/^(;|{|})/) {
 			print "END($1)\n" if ($dbg_values > 1);
 			$type = 'E';
+			$av_pend_colon = 'O';
+
+		} elsif ($cur =~ /^(\?)/o) {
+			print "QUESTION($1)\n" if ($dbg_values > 1);
+			$type = 'N';
+
+		} elsif ($cur =~ /^(:)/o) {
+			print "COLON($1,$av_pend_colon)\n" if ($dbg_values > 1);
+
+			substr($var, length($res), 1, $av_pend_colon);
+			if ($av_pend_colon eq 'C' || $av_pend_colon eq 'L') {
+				$type = 'E';
+			} else {
+				$type = 'N';
+			}
+			$av_pend_colon = 'O';
 
-		} elsif ($cur =~ /^(;|\?|:|\[)/o) {
+		} elsif ($cur =~ /^(;|\[)/o) {
 			print "CLOSE($1)\n" if ($dbg_values > 1);
 			$type = 'N';
 
@@ -840,7 +873,7 @@ sub annotate_values {
 		}
 	}
 
-	return $res;
+	return ($res, $var);
 }
 
 sub possible {
@@ -1294,12 +1327,14 @@ sub process {
 
 		# Track the 'values' across context and added lines.
 		my $opline = $line; $opline =~ s/^./ /;
-		my $curr_values = annotate_values($opline . "\n", $prev_values);
+		my ($curr_values, $curr_vars) =
+				annotate_values($opline . "\n", $prev_values);
 		$curr_values = $prev_values . $curr_values;
 		if ($dbg_values) {
 			my $outline = $opline; $outline =~ s/\t/ /g;
 			print "$linenr > .$outline\n";
 			print "$linenr > $curr_values\n";
+			print "$linenr >  $curr_vars\n";
 		}
 		$prev_values = substr($curr_values, -1);
 
@@ -1490,7 +1525,8 @@ sub process {
 				<<=|>>=|<=|>=|==|!=|
 				\+=|-=|\*=|\/=|%=|\^=|\|=|&=|
 				=>|->|<<|>>|<|>|=|!|~|
-				&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%
+				&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%|
+				\?|:
 			}x;
 			my @elements = split(/($ops|;)/, $opline);
 			my $off = 0;
@@ -1554,6 +1590,9 @@ sub process {
 				#	print "UNARY: <$op_left$op_type $is_unary $a:$op:$c> <$ca:$op:$cc> <$unary_ctx>\n";
 				#}
 
+				# Get the full operator variant.
+				my $opv = $op . substr($curr_vars, $off, 1);
+
 				# Ignore operators passed as parameters.
 				if ($op_type ne 'V' &&
 				    $ca =~ /\s$/ && $cc =~ /^\s*,/) {
@@ -1571,8 +1610,10 @@ sub process {
 				# // is a comment
 				} elsif ($op eq '//') {
 
-				# -> should have no spaces
-				} elsif ($op eq '->') {
+				# No spaces for:
+				#   ->
+				#   :   when part of a bitfield
+				} elsif ($op eq '->' || $opv eq ':B') {
 					if ($ctx =~ /Wx.|.xW/) {
 						ERROR("spaces prohibited around that '$op' $at\n" . $hereptr);
 					}
@@ -1628,11 +1669,33 @@ sub process {
 							$hereptr);
 					}
 
+				# A colon needs no spaces before when it is
+				# terminating a case value or a label.
+				} elsif ($opv eq ':C' || $opv eq ':L') {
+					if ($ctx =~ /Wx./) {
+						ERROR("space prohibited before that '$op' $at\n" . $hereptr);
+					}
+
 				# All the others need spaces both sides.
 				} elsif ($ctx !~ /[EWC]x[CWE]/) {
+					my $ok = 0;
+
 					# Ignore email addresses <foo@bar>
-					if (!($op eq '<' && $cb =~ /$;\S+\@\S+>/) &&
-					    !($op eq '>' && $cb =~ /<\S+\@\S+$;/)) {
+					if (($op eq '<' &&
+					     $cc =~ /^\S+\@\S+>/) ||
+					    ($op eq '>' &&
+					     $ca =~ /<\S+\@\S+$/))
+					{
+					    	$ok = 1;
+					}
+
+					# Ignore ?:
+					if (($opv eq ':O' && $ca =~ /\?$/) ||
+					    ($op eq '?' && $cc =~ /^:/)) {
+					    	$ok = 1;
+					}
+
+					if ($ok == 0) {
 						ERROR("spaces required around that '$op' $at\n" . $hereptr);
 					}
 				}
-- 
cgit v1.2.3


From 74048ed811152a995a88945ba9e0dded34adfff4 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:10 -0700
Subject: checkpatch: variants -- move the main unary/binary operators to use
 variants

Now that we have a variants system, move to using that to carry the
unary/binary designation for +, -, &, and *.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 88027f237cd..8afa88aaed9 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -858,6 +858,19 @@ sub annotate_values {
 			print "CLOSE($1)\n" if ($dbg_values > 1);
 			$type = 'N';
 
+		} elsif ($cur =~ /^(-(?![->])|\+(?!\+)|\*|\&(?!\&))/o) {
+			my $variant;
+
+			print "OPV($1)\n" if ($dbg_values > 1);
+			if ($type eq 'V') {
+				$variant = 'B';
+			} else {
+				$variant = 'U';
+			}
+
+			substr($var, length($res), 1, $variant);
+			$type = 'N';
+
 		} elsif ($cur =~ /^($Operators)/o) {
 			print "OP($1)\n" if ($dbg_values > 1);
 			if ($1 ne '++' && $1 ne '--') {
@@ -1573,22 +1586,8 @@ sub process {
 				my $ptr = substr($blank, 0, $off) . "^";
 				my $hereptr = "$hereline$ptr\n";
 
-				# Classify operators into binary, unary, or
-				# definitions (* only) where they have more
-				# than one mode.
+				# Pull out the value of this operator.
 				my $op_type = substr($curr_values, $off + 1, 1);
-				my $op_left = substr($curr_values, $off, 1);
-				my $is_unary;
-				if ($op_type eq 'T') {
-					$is_unary = 2;
-				} elsif ($op_left eq 'V') {
-					$is_unary = 0;
-				} else {
-					$is_unary = 1;
-				}
-				#if ($op eq '-' || $op eq '&' || $op eq '*') {
-				#	print "UNARY: <$op_left$op_type $is_unary $a:$op:$c> <$ca:$op:$cc> <$unary_ctx>\n";
-				#}
 
 				# Get the full operator variant.
 				my $opv = $op . substr($curr_vars, $off, 1);
@@ -1625,18 +1624,19 @@ sub process {
 					}
 
 				# '*' as part of a type definition -- reported already.
-				} elsif ($op eq '*' && $is_unary == 2) {
+				} elsif ($opv eq '*_') {
 					#warn "'*' is part of type\n";
 
 				# unary operators should have a space before and
 				# none after.  May be left adjacent to another
 				# unary operator, or a cast
 				} elsif ($op eq '!' || $op eq '~' ||
-				         ($is_unary && ($op eq '*' || $op eq '-' || $op eq '&'))) {
+					 $opv eq '*U' || $opv eq '-U' ||
+					 $opv eq '&U') {
 					if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
 						ERROR("space required before that '$op' $at\n" . $hereptr);
 					}
-					if ($op  eq '*' && $cc =~/\s*const\b/) {
+					if ($op eq '*' && $cc =~/\s*const\b/) {
 						# A unary '*' may be const
 
 					} elsif ($ctx =~ /.xW/) {
-- 
cgit v1.2.3


From 292f1a9b342d763f94ea3915726a48905be4acd1 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:11 -0700
Subject: checkpatch: complex macros need to ignore comments

Ensure we ignore comments in complex macro detection else we incorrectly
report this:

	#define PFM_GROUP_PERM_ANY     -1      /* any user/group */

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 1 +
 1 file changed, 1 insertion(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 8afa88aaed9..96a762be574 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1972,6 +1972,7 @@ sub process {
 			} else {
 				$dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//;
 			}
+			$dstat =~ s/$;//g;
 			$dstat =~ s/\\\n.//g;
 			$dstat =~ s/^\s*//s;
 			$dstat =~ s/\s*$//s;
-- 
cgit v1.2.3


From 234fff6515a11cf3e67c793146689da426787fea Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:12 -0700
Subject: checkpatch: types cannot start mid word for pointer tests

When checking spacing for pointer checks the type cannot start in the
middle of a word, ie. this is not 'int * bar':

	x = fooint * bar;

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 96a762be574..022ee557b68 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1435,11 +1435,11 @@ sub process {
 			ERROR("\"(foo $1 )\" should be \"(foo $1)\"\n" .
 				$herecurr);
 
-		} elsif ($line =~ m{$NonptrType(\*+)(?:\s+(?:$Attribute|$Sparse))?\s+[A-Za-z\d_]+}) {
+		} elsif ($line =~ m{\b$NonptrType(\*+)(?:\s+(?:$Attribute|$Sparse))?\s+[A-Za-z\d_]+}) {
 			ERROR("\"foo$1 bar\" should be \"foo $1bar\"\n" .
 				$herecurr);
 
-		} elsif ($line =~ m{$NonptrType\s+(\*+)(?!\s+(?:$Attribute|$Sparse))\s+[A-Za-z\d_]+}) {
+		} elsif ($line =~ m{\b$NonptrType\s+(\*+)(?!\s+(?:$Attribute|$Sparse))\s+[A-Za-z\d_]+}) {
 			ERROR("\"foo $1 bar\" should be \"foo $1bar\"\n" .
 				$herecurr);
 		}
-- 
cgit v1.2.3


From 33cba0657393a75e18e1781e3e13613303f18124 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@shadowen.org>
Date: Wed, 23 Jul 2008 21:29:12 -0700
Subject: checkpatch: version 0.21

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 022ee557b68..bc677939822 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -9,7 +9,7 @@ use strict;
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.20';
+my $V = '0.21';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
-- 
cgit v1.2.3


From 7102ed519a08b70eadc8fea9d8765d2d990241d1 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:29:13 -0700
Subject: remove the OSS trident driver

SOUND_TRIDENT was the last PCI OSS driver, and since there's already an
ALSA driver for the same hardware we can remove it.

[muli@il.ibm.com: update CREDITS]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 CREDITS             |    8 +
 MAINTAINERS         |    6 -
 sound/oss/Kconfig   |   41 -
 sound/oss/Makefile  |    1 -
 sound/oss/trident.c | 4654 ---------------------------------------------------
 sound/oss/trident.h |  358 ----
 6 files changed, 8 insertions(+), 5060 deletions(-)
 delete mode 100644 sound/oss/trident.c
 delete mode 100644 sound/oss/trident.h

diff --git a/CREDITS b/CREDITS
index 077b147388b..c62dcb3b7e2 100644
--- a/CREDITS
+++ b/CREDITS
@@ -317,6 +317,14 @@ S: 2322 37th Ave SW
 S: Seattle, Washington 98126-2010
 S: USA
 
+N: Muli Ben-Yehuda
+E: mulix@mulix.org
+E: muli@il.ibm.com
+W: http://www.mulix.org
+D: trident OSS sound driver, x86-64 dma-ops and Calgary IOMMU,
+D: KVM and Xen bits and other misc. hackery.
+S: Haifa, Israel
+
 N: Johannes Berg
 E: johannes@sipsolutions.net
 W: http://johannes.sipsolutions.net/
diff --git a/MAINTAINERS b/MAINTAINERS
index 7e5c7b0290b..5ecb97e13e5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4080,12 +4080,6 @@ W:	http://www.prosec.rub.de/tpm/
 L:	tpmdd-devel@lists.sourceforge.net
 S:	Maintained
 
-TRIDENT 4DWAVE/SIS 7018 PCI AUDIO CORE
-P:	Muli Ben-Yehuda
-M:	mulix@mulix.org
-L:	linux-kernel@vger.kernel.org
-S:	Maintained
-
 TRIVIAL PATCHES
 P:	Jesper Juhl
 M:	trivial@kernel.org
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 33940139844..d4fafb6eec6 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -35,47 +35,6 @@ config SOUND_AU1550_AC97
 	tristate "Au1550/Au1200 AC97 Sound"
 	depends on SOC_AU1550 || SOC_AU1200
 
-config SOUND_TRIDENT
-	tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
-	depends on PCI
-	---help---
-	  Say Y or M if you have a PCI sound card utilizing the Trident
-	  4DWave-DX/NX chipset or your mother board chipset has SiS 7018
-	  or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded
-	  in SiS960 Super South Bridge and SiS540/630 Single Chipset.
-	  The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D,
-	  M1535+ or M1535D+ South Bridge.
-
-	  Use lspci -n to find out if your sound card or chipset uses
-	  Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands
-	  for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID
-	  10B9:5451 stands for ALi5451.
-
-	  This driver supports S/PDIF in/out (record/playback) for ALi 5451
-	  embedded in ALi M1535+ and M1535D+. Note that they aren't all
-	  enabled by default; you can enable them by saying Y to "/proc file
-	  system support" and "Sysctl support", and after the /proc file
-	  system has been mounted, executing the command
-
-		command			what is enabled
-
-	  echo 0>/proc/ALi5451	pcm out is also set to S/PDIF out. (Default).
-
-	  echo 1>/proc/ALi5451	use S/PDIF out to output pcm data.
-
-	  echo 2>/proc/ALi5451	use S/PDIF out to output non-pcm data.
-	  (AC3...).
-
-	  echo 3>/proc/ALi5451	record from Ac97 in(MIC, Line in...).
-	  (Default).
-
-	  echo 4>/proc/ALi5451	no matter Ac97 settings, record from S/PDIF
-	  in.
-
-
-	  This driver differs slightly from OSS/Free, so PLEASE READ the
-	  comments at the top of <file:sound/oss/trident.c>.
-
 config SOUND_MSNDCLAS
 	tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
 	depends on (m || !STANDALONE) && ISA
diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index 1f86299fae4..3a141474fb7 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_SOUND_MSNDCLAS)	+= msnd.o msnd_classic.o
 obj-$(CONFIG_SOUND_MSNDPIN)	+= msnd.o msnd_pinnacle.o
 obj-$(CONFIG_SOUND_VWSND)	+= vwsnd.o
 obj-$(CONFIG_SOUND_AU1550_AC97)	+= au1550_ac97.o ac97_codec.o
-obj-$(CONFIG_SOUND_TRIDENT)	+= trident.o ac97_codec.o
 obj-$(CONFIG_SOUND_BCM_CS4297A)	+= swarm_cs4297a.o
 
 obj-$(CONFIG_SOUND_WM97XX)	+= ac97_plugin_wm97xx.o
diff --git a/sound/oss/trident.c b/sound/oss/trident.c
deleted file mode 100644
index f43f91ef86c..00000000000
--- a/sound/oss/trident.c
+++ /dev/null
@@ -1,4654 +0,0 @@
-/*
- *	OSS driver for Linux 2.[46].x for
- *
- *	Trident 4D-Wave
- *	SiS 7018
- *	ALi 5451
- *	Tvia/IGST CyberPro 5050
- *
- *	Driver: Alan Cox <alan@redhat.com>
- *
- *  Built from:
- *	Low level code: <audio@tridentmicro.com> from ALSA
- *	Framework: Thomas Sailer <sailer@ife.ee.ethz.ch>
- *	Extended by: Zach Brown <zab@redhat.com>
- *
- *  Hacked up by:
- *	Aaron Holtzman <aholtzma@ess.engr.uvic.ca>
- *	Ollie Lho <ollie@sis.com.tw> SiS 7018 Audio Core Support
- *	Ching-Ling Lee <cling-li@ali.com.tw> ALi 5451 Audio Core Support
- *	Matt Wu <mattwu@acersoftech.com.cn> ALi 5451 Audio Core Support
- *	Peter Wächtler <pwaechtler@loewe-komp.de> CyberPro5050 support
- *      Muli Ben-Yehuda <mulix@mulix.org>
- *
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History
- *  v0.14.10j
- *  	January 3 2004 Eugene Teo <eugeneteo@eugeneteo.net>
- *  	minor cleanup to use pr_debug instead of TRDBG since it is already
- *  	defined in linux/kernel.h.
- *  v0.14.10i
- *      December 29 2003 Muli Ben-Yehuda <mulix@mulix.org>
- *      major cleanup for 2.6, fix a few error patch buglets
- *      with returning without properly cleaning up first,
- *      get rid of lock_kernel().
- *  v0.14.10h
- *	Sept 10 2002 Pascal Schmidt <der.eremit@email.de>
- *	added support for ALi 5451 joystick port
- *  v0.14.10g
- *	Sept 05 2002 Alan Cox <alan@redhat.com>
- *	adapt to new pci joystick attachment interface
- *  v0.14.10f
- *      July 24 2002 Muli Ben-Yehuda <mulix@actcom.co.il>
- *      patch from Eric Lemar (via Ian Soboroff): in suspend and resume,
- *      fix wrong cast from pci_dev* to struct trident_card*.
- *  v0.14.10e
- *      July 19 2002 Muli Ben-Yehuda <mulix@actcom.co.il>
- *      rewrite the DMA buffer allocation/deallcoation functions, to make it
- *      modular and fix a bug where we would call free_pages on memory
- *      obtained with pci_alloc_consistent. Also remove unnecessary #ifdef
- *      CONFIG_PROC_FS and various other cleanups.
- *  v0.14.10d
- *      July 19 2002 Muli Ben-Yehuda <mulix@actcom.co.il>
- *      made several printk(KERN_NOTICE...) into TRDBG(...), to avoid spamming
- *      my syslog with hundreds of messages.
- *  v0.14.10c
- *      July 16 2002 Muli Ben-Yehuda <mulix@actcom.co.il>
- *      Cleaned up Lei Hu's 0.4.10 driver to conform to Documentation/CodingStyle
- *      and the coding style used in the rest of the file.
- *  v0.14.10b
- *      June 23 2002 Muli Ben-Yehuda <mulix@actcom.co.il>
- *      add a missing unlock_set_fmt, remove a superflous lock/unlock pair
- *      with nothing in between.
- *  v0.14.10a
- *      June 21 2002 Muli Ben-Yehuda <mulix@actcom.co.il>
- *      use a debug macro instead of #ifdef CONFIG_DEBUG, trim to 80 columns
- *      per line, use 'do {} while (0)' in statement macros.
- *  v0.14.10
- *      June 6 2002 Lei Hu <Lei_hu@ali.com.tw>
- *      rewrite the part to read/write registers of audio codec for Ali5451
- *  v0.14.9e
- *      January 2 2002 Vojtech Pavlik <vojtech@ucw.cz> added gameport
- *      support to avoid resource conflict with pcigame.c
- *  v0.14.9d
- *  	October 8 2001 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
- *	use set_current_state, properly release resources on failure in
- *	trident_probe, get rid of check_region
- *  v0.14.9c
- *	August 10 2001 Peter Wächtler <pwaechtler@loewe-komp.de>
- *	added support for Tvia (formerly Integraphics/IGST) CyberPro5050
- *	this chip is often found in settop boxes (combined video+audio)
- *  v0.14.9b
- *	Switch to static inline not extern inline (gcc 3)
- *  v0.14.9a
- *	Aug 6 2001 Alan Cox
- *	0.14.9 crashed on rmmod due to a timer/bh left running. Simplified
- *	the existing logic (the BH doesn't help as ac97 is lock_irqsave)
- *	and used del_timer_sync to clean up
- *	Fixed a problem where the ALi change broke my generic card
- *  v0.14.9
- *	Jul 10 2001 Matt Wu
- *	Add H/W Volume Control
- *  v0.14.8a
- *	July 7 2001 Alan Cox
- *	Moved Matt Wu's ac97 register cache into the card structure
- *  v0.14.8
- *	Apr 30 2001 Matt Wu
- *	Set EBUF1 and EBUF2 to still mode
- *	Add dc97/ac97 reset function
- *	Fix power management: ali_restore_regs
- *  unreleased
- *	Mar 09 2001 Matt Wu
- *	Add cache for ac97 access
- *  v0.14.7
- *	Feb 06 2001 Matt Wu
- *	Fix ac97 initialization
- *	Fix bug: an extra tail will be played when playing
- *	Jan 05 2001 Matt Wu
- *	Implement multi-channels and S/PDIF in support for ALi 1535+
- *  v0.14.6
- *	Nov 1 2000 Ching-Ling Lee
- *	Fix the bug of memory leak when switching 5.1-channels to 2 channels.
- *	Add lock protection into dynamic changing format of data.
- *	Oct 18 2000 Ching-Ling Lee
- *	5.1-channels support for ALi
- *	June 28 2000 Ching-Ling Lee
- *	S/PDIF out/in(playback/record) support for ALi 1535+, using /proc to be selected by user
- *	Simple Power Management support for ALi
- *  v0.14.5 May 23 2000 Ollie Lho
- *  	Misc bug fix from the Net
- *  v0.14.4 May 20 2000 Aaron Holtzman
- *  	Fix kfree'd memory access in release
- *  	Fix race in open while looking for a free virtual channel slot
- *  	remove open_wait wq (which appears to be unused)
- *  v0.14.3 May 10 2000 Ollie Lho
- *	fixed a small bug in trident_update_ptr, xmms 1.0.1 no longer uses 100% CPU
- *  v0.14.2 Mar 29 2000 Ching-Ling Lee
- *	Add clear to silence advance in trident_update_ptr
- *	fix invalid data of the end of the sound
- *  v0.14.1 Mar 24 2000 Ching-Ling Lee
- *	ALi 5451 support added, playback and recording O.K.
- *	ALi 5451 originally developed and structured based on sonicvibes, and
- *	suggested to merge into this file by Alan Cox.
- *  v0.14 Mar 15 2000 Ollie Lho
- *	5.1 channel output support with channel binding. What's the Matrix ?
- *  v0.13.1 Mar 10 2000 Ollie Lho
- *	few minor bugs on dual codec support, needs more testing
- *  v0.13 Mar 03 2000 Ollie Lho
- *	new pci_* for 2.4 kernel, back ported to 2.2
- *  v0.12 Feb 23 2000 Ollie Lho
- *	Preliminary Recording support
- *  v0.11.2 Feb 19 2000 Ollie Lho
- *	removed incomplete full-dulplex support
- *  v0.11.1 Jan 28 2000 Ollie Lho
- *	small bug in setting sample rate for 4d-nx (reported by Aaron)
- *  v0.11 Jan 27 2000 Ollie Lho
- *	DMA bug, scheduler latency, second try
- *  v0.10 Jan 24 2000 Ollie Lho
- *	DMA bug fixed, found kernel scheduling problem
- *  v0.09 Jan 20 2000 Ollie Lho
- *	Clean up of channel register access routine (prepare for channel binding)
- *  v0.08 Jan 14 2000 Ollie Lho
- *	Isolation of AC97 codec code
- *  v0.07 Jan 13 2000 Ollie Lho
- *	Get rid of ugly old low level access routines (e.g. CHRegs.lp****)
- *  v0.06 Jan 11 2000 Ollie Lho
- *	Preliminary support for dual (more ?) AC97 codecs
- *  v0.05 Jan 08 2000 Luca Montecchiani <m.luca@iname.com>
- *	adapt to 2.3.x new __setup/__init call
- *  v0.04 Dec 31 1999 Ollie Lho
- *	Multiple Open, using Middle Loop Interrupt to smooth playback
- *  v0.03 Dec 24 1999 Ollie Lho
- *	mem leak in prog_dmabuf and dealloc_dmabuf removed
- *  v0.02 Dec 15 1999 Ollie Lho
- *	SiS 7018 support added, playback O.K.
- *  v0.01 Alan Cox et. al.
- *	Initial Release in kernel 2.3.30, does not work
- *
- *  ToDo
- *	Clean up of low level channel register access code. (done)
- *	Fix the bug on dma buffer management in update_ptr, read/write, drain_dac (done)
- *	Dual AC97 codecs support (done)
- *	Recording support (done)
- *	Mmap support
- *	"Channel Binding" ioctl extension (done)
- *	new pci device driver interface for 2.4 kernel (done)
- *
- *	Lock order (high->low)
- *		lock	-	hardware lock
- *		open_mutex - 	guard opens
- *		sem	-	guard dmabuf, write re-entry etc
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/sound.h>
-#include <linux/slab.h>
-#include <linux/soundcard.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/spinlock.h>
-#include <linux/ac97_codec.h>
-#include <linux/bitops.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <linux/gameport.h>
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/mm.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#if defined(CONFIG_ALPHA_NAUTILUS) || defined(CONFIG_ALPHA_GENERIC)
-#include <asm/hwrpb.h>
-#endif
-
-#include "trident.h"
-
-#define DRIVER_VERSION "0.14.10j-2.6"
-
-#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
-#define SUPPORT_JOYSTICK 1
-#endif
-
-/* magic numbers to protect our data structures */
-#define TRIDENT_CARD_MAGIC	0x5072696E	/* "Prin" */
-#define TRIDENT_STATE_MAGIC	0x63657373	/* "cess" */
-
-#define TRIDENT_DMA_MASK	0x3fffffff	/* DMA buffer mask for pci_alloc_consist */
-#define ALI_DMA_MASK		0x7fffffff	/* ALI Tridents have 31-bit DMA. Wow. */
-
-#define NR_HW_CH		32
-
-/* maximum number of AC97 codecs connected, AC97 2.0 defined 4, but 7018 and 4D-NX only
-   have 2 SDATA_IN lines (currently) */
-#define NR_AC97		2
-
-/* minor number of /dev/swmodem (temporary, experimental) */
-#define SND_DEV_SWMODEM	7
-
-static const unsigned ali_multi_channels_5_1[] = {
-	/*ALI_SURR_LEFT_CHANNEL, ALI_SURR_RIGHT_CHANNEL, */
-	ALI_CENTER_CHANNEL,
-	ALI_LEF_CHANNEL,
-	ALI_SURR_LEFT_CHANNEL,
-	ALI_SURR_RIGHT_CHANNEL
-};
-
-static const unsigned sample_size[] = { 1, 2, 2, 4 };
-static const unsigned sample_shift[] = { 0, 1, 1, 2 };
-
-static const char invalid_magic[] = KERN_CRIT "trident: invalid magic value in %s\n";
-
-enum {
-	TRIDENT_4D_DX = 0,
-	TRIDENT_4D_NX,
-	SIS_7018,
-	ALI_5451,
-	CYBER5050
-};
-
-static char *card_names[] = {
-	"Trident 4DWave DX",
-	"Trident 4DWave NX",
-	"SiS 7018 PCI Audio",
-	"ALi Audio Accelerator",
-	"Tvia/IGST CyberPro 5050"
-};
-
-static struct pci_device_id trident_pci_tbl[] = {
-	{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_DX),
-		PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, TRIDENT_4D_DX},
-	{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_NX),
-		0, 0, TRIDENT_4D_NX},
-	{PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7018), 0, 0, SIS_7018},
-	{PCI_DEVICE(PCI_VENDOR_ID_ALI, PCI_DEVICE_ID_ALI_5451), 0, 0, ALI_5451},
-	{PCI_DEVICE(PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5050),
-		0, 0, CYBER5050},
-	{0,}
-};
-
-MODULE_DEVICE_TABLE(pci, trident_pci_tbl);
-
-/* "software" or virtual channel, an instance of opened /dev/dsp */
-struct trident_state {
-	unsigned int magic;
-	struct trident_card *card;	/* Card info */
-
-	/* file mode */
-	mode_t open_mode;
-
-	/* virtual channel number */
-	int virt;
-
-	struct dmabuf {
-		/* wave sample stuff */
-		unsigned int rate;
-		unsigned char fmt, enable;
-
-		/* hardware channel */
-		struct trident_channel *channel;
-
-		/* OSS buffer management stuff */
-		void *rawbuf;
-		dma_addr_t dma_handle;
-		unsigned buforder;
-		unsigned numfrag;
-		unsigned fragshift;
-
-		/* our buffer acts like a circular ring */
-		unsigned hwptr;	/* where dma last started, updated by update_ptr */
-		unsigned swptr;	/* where driver last clear/filled, updated by read/write */
-		int count;	/* bytes to be comsumed or been generated by dma machine */
-		unsigned total_bytes;	/* total bytes dmaed by hardware */
-
-		unsigned error;	/* number of over/underruns */
-                /* put process on wait queue when no more space in buffer */
-		wait_queue_head_t wait;
-
-		/* redundant, but makes calculations easier */
-		unsigned fragsize;
-		unsigned dmasize;
-		unsigned fragsamples;
-
-		/* OSS stuff */
-		unsigned mapped:1;
-		unsigned ready:1;
-		unsigned endcleared:1;
-		unsigned update_flag;
-		unsigned ossfragshift;
-		int ossmaxfrags;
-		unsigned subdivision;
-
-	} dmabuf;
-
-	/* 5.1 channels */
-	struct trident_state *other_states[4];
-	int multi_channels_adjust_count;
-	unsigned chans_num;
-	unsigned long fmt_flag;
-	/* Guard against mmap/write/read races */
-	struct mutex sem;
-
-};
-
-/* hardware channels */
-struct trident_channel {
-	int num; /* channel number */
-	u32 lba; /* Loop Begine Address, where dma buffer starts */
-	u32 eso; /* End Sample Offset, wehre dma buffer ends */
-	         /* (in the unit of samples) */
-	u32 delta; /* delta value, sample rate / 48k for playback, */
-	           /* 48k/sample rate for recording */
-	u16 attribute; /* control where PCM data go and come  */
-	u16 fm_vol;
-	u32 control; /* signed/unsigned, 8/16 bits, mono/stereo */
-};
-
-struct trident_pcm_bank_address {
-	u32 start;
-	u32 stop;
-	u32 aint;
-	u32 aint_en;
-};
-
-static struct trident_pcm_bank_address bank_a_addrs = {
-	T4D_START_A,
-	T4D_STOP_A,
-	T4D_AINT_A,
-	T4D_AINTEN_A
-};
-
-static struct trident_pcm_bank_address bank_b_addrs = {
-	T4D_START_B,
-	T4D_STOP_B,
-	T4D_AINT_B,
-	T4D_AINTEN_B
-};
-
-struct trident_pcm_bank {
-	/* register addresses to control bank operations */
-	struct trident_pcm_bank_address *addresses;
-	/* each bank has 32 channels */
-	u32 bitmap;		/* channel allocation bitmap */
-	struct trident_channel channels[32];
-};
-
-struct trident_card {
-	unsigned int magic;
-
-	/* We keep trident cards in a linked list */
-	struct trident_card *next;
-
-	/* single open lock mechanism, only used for recording */
-	struct mutex open_mutex;
-
-	/* The trident has a certain amount of cross channel interaction
-	   so we use a single per card lock */
-	spinlock_t lock;
-
-	/* PCI device stuff */
-	struct pci_dev *pci_dev;
-	u16 pci_id;
-	u8 revision;
-
-	/* soundcore stuff */
-	int dev_audio;
-
-	/* structures for abstraction of hardware facilities, codecs, */
-	/* banks and channels */
-	struct ac97_codec *ac97_codec[NR_AC97];
-	struct trident_pcm_bank banks[NR_BANKS];
-	struct trident_state *states[NR_HW_CH];
-
-	/* hardware resources */
-	unsigned long iobase;
-	u32 irq;
-
-	/* Function support */
-	struct trident_channel *(*alloc_pcm_channel) (struct trident_card *);
-	struct trident_channel *(*alloc_rec_pcm_channel) (struct trident_card *);
-	void (*free_pcm_channel) (struct trident_card *, unsigned int chan);
-	void (*address_interrupt) (struct trident_card *);
-
-	/* Added by Matt Wu 01-05-2001 for spdif in */
-	int multi_channel_use_count;
-	int rec_channel_use_count;
-	u16 mixer_regs[64][NR_AC97];	/* Made card local by Alan */
-	int mixer_regs_ready;
-
-	/* Added for hardware volume control */
-	int hwvolctl;
-	struct timer_list timer;
-
-	/* Game port support */
-	struct gameport *gameport;
-};
-
-enum dmabuf_mode {
-	DM_PLAYBACK = 0,
-	DM_RECORD
-};
-
-/* table to map from CHANNELMASK to channel attribute for SiS 7018 */
-static u16 mask2attr[] = {
-	PCM_LR, PCM_LR, SURR_LR, CENTER_LFE,
-	HSET, MIC, MODEM_LINE1, MODEM_LINE2,
-	I2S_LR, SPDIF_LR
-};
-
-/* table to map from channel attribute to CHANNELMASK for SiS 7018 */
-static int attr2mask[] = {
-	DSP_BIND_MODEM1, DSP_BIND_MODEM2, DSP_BIND_FRONT, DSP_BIND_HANDSET,
-	DSP_BIND_I2S, DSP_BIND_CENTER_LFE, DSP_BIND_SURR, DSP_BIND_SPDIF
-};
-
-/* Added by Matt Wu 01-05-2001 for spdif in */
-static int ali_close_multi_channels(void);
-static void ali_delay(struct trident_card *card, int interval);
-static void ali_detect_spdif_rate(struct trident_card *card);
-
-static void ali_ac97_write(struct ac97_codec *codec, u8 reg, u16 val);
-static u16 ali_ac97_read(struct ac97_codec *codec, u8 reg);
-
-static struct trident_card *devs;
-
-static void trident_ac97_set(struct ac97_codec *codec, u8 reg, u16 val);
-static u16 trident_ac97_get(struct ac97_codec *codec, u8 reg);
-
-static int trident_open_mixdev(struct inode *inode, struct file *file);
-static int trident_ioctl_mixdev(struct inode *inode, struct file *file,
-				unsigned int cmd, unsigned long arg);
-
-static void ali_ac97_set(struct trident_card *card, int secondary, u8 reg, u16 val);
-static u16 ali_ac97_get(struct trident_card *card, int secondary, u8 reg);
-static void ali_set_spdif_out_rate(struct trident_card *card, unsigned int rate);
-static void ali_enable_special_channel(struct trident_state *stat);
-static struct trident_channel *ali_alloc_rec_pcm_channel(struct trident_card *card);
-static struct trident_channel *ali_alloc_pcm_channel(struct trident_card *card);
-static void ali_free_pcm_channel(struct trident_card *card, unsigned int channel);
-static int ali_setup_multi_channels(struct trident_card *card, int chan_nums);
-static unsigned int ali_get_spdif_in_rate(struct trident_card *card);
-static void ali_setup_spdif_in(struct trident_card *card);
-static void ali_disable_spdif_in(struct trident_card *card);
-static void ali_disable_special_channel(struct trident_card *card, int ch);
-static void ali_setup_spdif_out(struct trident_card *card, int flag);
-static int ali_write_5_1(struct trident_state *state,
-			 const char __user *buffer,
-			 int cnt_for_multi_channel, unsigned int *copy_count,
-			 unsigned int *state_cnt);
-static int ali_allocate_other_states_resources(struct trident_state *state,
-					       int chan_nums);
-static void ali_free_other_states_resources(struct trident_state *state);
-
-#define seek_offset(dma_ptr, buffer, cnt, offset, copy_count)	do { \
-        (dma_ptr) += (offset);	  \
-	(buffer) += (offset);	  \
-        (cnt) -= (offset);	  \
-	(copy_count) += (offset); \
-} while (0)
-
-static inline int lock_set_fmt(struct trident_state* state)
-{
-	if (test_and_set_bit(0, &state->fmt_flag))
-		return -EFAULT;
-
-	return 0;
-}
-
-static inline void unlock_set_fmt(struct trident_state* state)
-{
-	clear_bit(0, &state->fmt_flag);
-}
-
-static int
-trident_enable_loop_interrupts(struct trident_card *card)
-{
-	u32 global_control;
-
-	global_control = inl(TRID_REG(card, T4D_LFO_GC_CIR));
-
-	switch (card->pci_id) {
-	case PCI_DEVICE_ID_SI_7018:
-		global_control |= (ENDLP_IE | MIDLP_IE | BANK_B_EN);
-		break;
-	case PCI_DEVICE_ID_ALI_5451:
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_DX:
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_NX:
-	case PCI_DEVICE_ID_INTERG_5050:
-		global_control |= (ENDLP_IE | MIDLP_IE);
-		break;
-	default:
-		return 0;
-	}
-
-	outl(global_control, TRID_REG(card, T4D_LFO_GC_CIR));
-
-	pr_debug("trident: Enable Loop Interrupts, globctl = 0x%08X\n",
-		 inl(TRID_REG(card, T4D_LFO_GC_CIR)));
-
-	return 1;
-}
-
-static int
-trident_disable_loop_interrupts(struct trident_card *card)
-{
-	u32 global_control;
-
-	global_control = inl(TRID_REG(card, T4D_LFO_GC_CIR));
-	global_control &= ~(ENDLP_IE | MIDLP_IE);
-	outl(global_control, TRID_REG(card, T4D_LFO_GC_CIR));
-
-	pr_debug("trident: Disabled Loop Interrupts, globctl = 0x%08X\n",
-		 global_control);
-
-	return 1;
-}
-
-static void
-trident_enable_voice_irq(struct trident_card *card, unsigned int channel)
-{
-	unsigned int mask = 1 << (channel & 0x1f);
-	struct trident_pcm_bank *bank = &card->banks[channel >> 5];
-	u32 reg, addr = bank->addresses->aint_en;
-
-	reg = inl(TRID_REG(card, addr));
-	reg |= mask;
-	outl(reg, TRID_REG(card, addr));
-
-#ifdef DEBUG
-	reg = inl(TRID_REG(card, addr));
-	pr_debug("trident: enabled IRQ on channel %d, %s = 0x%08x(addr:%X)\n",
-		 channel, addr == T4D_AINTEN_B ? "AINTEN_B" : "AINTEN_A",
-		 reg, addr);
-#endif /* DEBUG */
-}
-
-static void
-trident_disable_voice_irq(struct trident_card *card, unsigned int channel)
-{
-	unsigned int mask = 1 << (channel & 0x1f);
-	struct trident_pcm_bank *bank = &card->banks[channel >> 5];
-	u32 reg, addr = bank->addresses->aint_en;
-
-	reg = inl(TRID_REG(card, addr));
-	reg &= ~mask;
-	outl(reg, TRID_REG(card, addr));
-
-	/* Ack the channel in case the interrupt was set before we disable it. */
-	outl(mask, TRID_REG(card, bank->addresses->aint));
-
-#ifdef DEBUG
-	reg = inl(TRID_REG(card, addr));
-	pr_debug("trident: disabled IRQ on channel %d, %s = 0x%08x(addr:%X)\n",
-		 channel, addr == T4D_AINTEN_B ? "AINTEN_B" : "AINTEN_A",
-		 reg, addr);
-#endif /* DEBUG */
-}
-
-static void
-trident_start_voice(struct trident_card *card, unsigned int channel)
-{
-	unsigned int mask = 1 << (channel & 0x1f);
-	struct trident_pcm_bank *bank = &card->banks[channel >> 5];
-	u32 addr = bank->addresses->start;
-
-#ifdef DEBUG
-	u32 reg;
-#endif /* DEBUG */
-
-	outl(mask, TRID_REG(card, addr));
-
-#ifdef DEBUG
-	reg = inl(TRID_REG(card, addr));
-	pr_debug("trident: start voice on channel %d, %s = 0x%08x(addr:%X)\n",
-		 channel, addr == T4D_START_B ? "START_B" : "START_A",
-		 reg, addr);
-#endif /* DEBUG */
-}
-
-static void
-trident_stop_voice(struct trident_card *card, unsigned int channel)
-{
-	unsigned int mask = 1 << (channel & 0x1f);
-	struct trident_pcm_bank *bank = &card->banks[channel >> 5];
-	u32 addr = bank->addresses->stop;
-
-#ifdef DEBUG
-	u32 reg;
-#endif /* DEBUG */
-
-	outl(mask, TRID_REG(card, addr));
-
-#ifdef DEBUG
-	reg = inl(TRID_REG(card, addr));
-	pr_debug("trident: stop voice on channel %d, %s = 0x%08x(addr:%X)\n",
-		 channel, addr == T4D_STOP_B ? "STOP_B" : "STOP_A",
-		 reg, addr);
-#endif /* DEBUG */
-}
-
-static u32
-trident_get_interrupt_mask(struct trident_card *card, unsigned int channel)
-{
-	struct trident_pcm_bank *bank = &card->banks[channel];
-	u32 addr = bank->addresses->aint;
-	return inl(TRID_REG(card, addr));
-}
-
-static int
-trident_check_channel_interrupt(struct trident_card *card, unsigned int channel)
-{
-	unsigned int mask = 1 << (channel & 0x1f);
-	u32 reg = trident_get_interrupt_mask(card, channel >> 5);
-
-#ifdef DEBUG
-	if (reg & mask)
-		pr_debug("trident: channel %d has interrupt, %s = 0x%08x\n",
-			 channel, reg == T4D_AINT_B ? "AINT_B" : "AINT_A",
-			 reg);
-#endif /* DEBUG */
-	return (reg & mask) ? 1 : 0;
-}
-
-static void
-trident_ack_channel_interrupt(struct trident_card *card, unsigned int channel)
-{
-	unsigned int mask = 1 << (channel & 0x1f);
-	struct trident_pcm_bank *bank = &card->banks[channel >> 5];
-	u32 reg, addr = bank->addresses->aint;
-
-	reg = inl(TRID_REG(card, addr));
-	reg &= mask;
-	outl(reg, TRID_REG(card, addr));
-
-#ifdef DEBUG
-	reg = inl(TRID_REG(card, T4D_AINT_B));
-	pr_debug("trident: Ack channel %d interrupt, AINT_B = 0x%08x\n",
-		 channel, reg);
-#endif /* DEBUG */
-}
-
-static struct trident_channel *
-trident_alloc_pcm_channel(struct trident_card *card)
-{
-	struct trident_pcm_bank *bank;
-	int idx;
-
-	bank = &card->banks[BANK_B];
-
-	for (idx = 31; idx >= 0; idx--) {
-		if (!(bank->bitmap & (1 << idx))) {
-			struct trident_channel *channel = &bank->channels[idx];
-			bank->bitmap |= 1 << idx;
-			channel->num = idx + 32;
-			return channel;
-		}
-	}
-
-	/* no more free channels available */
-	printk(KERN_ERR "trident: no more channels available on Bank B.\n");
-	return NULL;
-}
-
-static void
-trident_free_pcm_channel(struct trident_card *card, unsigned int channel)
-{
-	int bank;
-	unsigned char b;
-
-	if (channel < 31 || channel > 63)
-		return;
-
-	if (card->pci_id == PCI_DEVICE_ID_TRIDENT_4DWAVE_DX ||
-	    card->pci_id == PCI_DEVICE_ID_TRIDENT_4DWAVE_NX) {
-		b = inb(TRID_REG(card, T4D_REC_CH));
-		if ((b & ~0x80) == channel)
-			outb(0x0, TRID_REG(card, T4D_REC_CH));
-	}
-
-	bank = channel >> 5;
-	channel = channel & 0x1f;
-
-	card->banks[bank].bitmap &= ~(1 << (channel));
-}
-
-static struct trident_channel *
-cyber_alloc_pcm_channel(struct trident_card *card)
-{
-	struct trident_pcm_bank *bank;
-	int idx;
-
-	/* The cyberpro 5050 has only 32 voices and one bank */
-	/* .. at least they are not documented (if you want to call that
-	 * crap documentation), perhaps broken ? */
-
-	bank = &card->banks[BANK_A];
-
-	for (idx = 31; idx >= 0; idx--) {
-		if (!(bank->bitmap & (1 << idx))) {
-			struct trident_channel *channel = &bank->channels[idx];
-			bank->bitmap |= 1 << idx;
-			channel->num = idx;
-			return channel;
-		}
-	}
-
-	/* no more free channels available */
-	printk(KERN_ERR "cyberpro5050: no more channels available on Bank A.\n");
-	return NULL;
-}
-
-static void
-cyber_free_pcm_channel(struct trident_card *card, unsigned int channel)
-{
-	if (channel > 31)
-		return;
-	card->banks[BANK_A].bitmap &= ~(1 << (channel));
-}
-
-static inline void
-cyber_outidx(int port, int idx, int data)
-{
-	outb(idx, port);
-	outb(data, port + 1);
-}
-
-static inline int
-cyber_inidx(int port, int idx)
-{
-	outb(idx, port);
-	return inb(port + 1);
-}
-
-static int
-cyber_init_ritual(struct trident_card *card)
-{
-	/* some black magic, taken from SDK samples */
-	/* remove this and nothing will work */
-	int portDat;
-	int ret = 0;
-	unsigned long flags;
-
-	/*
-	 *      Keep interrupts off for the configure - we don't want to
-	 *      clash with another cyberpro config event
-	 */
-
-	spin_lock_irqsave(&card->lock, flags);
-	portDat = cyber_inidx(CYBER_PORT_AUDIO, CYBER_IDX_AUDIO_ENABLE);
-	/* enable, if it was disabled */
-	if ((portDat & CYBER_BMSK_AUENZ) != CYBER_BMSK_AUENZ_ENABLE) {
-		printk(KERN_INFO "cyberpro5050: enabling audio controller\n");
-		cyber_outidx(CYBER_PORT_AUDIO, CYBER_IDX_AUDIO_ENABLE,
-			     portDat | CYBER_BMSK_AUENZ_ENABLE);
-		/* check again if hardware is enabled now */
-		portDat = cyber_inidx(CYBER_PORT_AUDIO, CYBER_IDX_AUDIO_ENABLE);
-	}
-	if ((portDat & CYBER_BMSK_AUENZ) != CYBER_BMSK_AUENZ_ENABLE) {
-		printk(KERN_ERR "cyberpro5050: initAudioAccess: no success\n");
-		ret = -1;
-	} else {
-		cyber_outidx(CYBER_PORT_AUDIO, CYBER_IDX_IRQ_ENABLE,
-			     CYBER_BMSK_AUDIO_INT_ENABLE);
-		cyber_outidx(CYBER_PORT_AUDIO, 0xbf, 0x01);
-		cyber_outidx(CYBER_PORT_AUDIO, 0xba, 0x20);
-		cyber_outidx(CYBER_PORT_AUDIO, 0xbb, 0x08);
-		cyber_outidx(CYBER_PORT_AUDIO, 0xbf, 0x02);
-		cyber_outidx(CYBER_PORT_AUDIO, 0xb3, 0x06);
-		cyber_outidx(CYBER_PORT_AUDIO, 0xbf, 0x00);
-	}
-	spin_unlock_irqrestore(&card->lock, flags);
-	return ret;
-}
-
-/*  called with spin lock held */
-
-static int
-trident_load_channel_registers(struct trident_card *card, u32 * data,
-			       unsigned int channel)
-{
-	int i;
-
-	if (channel > 63)
-		return 0;
-
-	/* select hardware channel to write */
-	outb(channel, TRID_REG(card, T4D_LFO_GC_CIR));
-
-	/* Output the channel registers, but don't write register
-	   three to an ALI chip. */
-	for (i = 0; i < CHANNEL_REGS; i++) {
-		if (i == 3 && card->pci_id == PCI_DEVICE_ID_ALI_5451)
-			continue;
-		outl(data[i], TRID_REG(card, CHANNEL_START + 4 * i));
-	}
-	if (card->pci_id == PCI_DEVICE_ID_ALI_5451 ||
-	    card->pci_id == PCI_DEVICE_ID_INTERG_5050) {
-		outl(ALI_EMOD_Still, TRID_REG(card, ALI_EBUF1));
-		outl(ALI_EMOD_Still, TRID_REG(card, ALI_EBUF2));
-	}
-	return 1;
-}
-
-/* called with spin lock held */
-static int
-trident_write_voice_regs(struct trident_state *state)
-{
-	unsigned int data[CHANNEL_REGS + 1];
-	struct trident_channel *channel;
-
-	channel = state->dmabuf.channel;
-
-	data[1] = channel->lba;
-	data[4] = channel->control;
-
-	switch (state->card->pci_id) {
-	case PCI_DEVICE_ID_ALI_5451:
-		data[0] = 0;	/* Current Sample Offset */
-		data[2] = (channel->eso << 16) | (channel->delta & 0xffff);
-		data[3] = 0;
-		break;
-	case PCI_DEVICE_ID_SI_7018:
-	case PCI_DEVICE_ID_INTERG_5050:
-		data[0] = 0;	/* Current Sample Offset */
-		data[2] = (channel->eso << 16) | (channel->delta & 0xffff);
-		data[3] = (channel->attribute << 16) | (channel->fm_vol & 0xffff);
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_DX:
-		data[0] = 0;	/* Current Sample Offset */
-		data[2] = (channel->eso << 16) | (channel->delta & 0xffff);
-		data[3] = channel->fm_vol & 0xffff;
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_NX:
-		data[0] = (channel->delta << 24);
-		data[2] = ((channel->delta << 16) & 0xff000000) |
-			(channel->eso & 0x00ffffff);
-		data[3] = channel->fm_vol & 0xffff;
-		break;
-	default:
-		return 0;
-	}
-
-	return trident_load_channel_registers(state->card, data, channel->num);
-}
-
-static int
-compute_rate_play(u32 rate)
-{
-	int delta;
-	/* We special case 44100 and 8000 since rounding with the equation
-	   does not give us an accurate enough value. For 11025 and 22050
-	   the equation gives us the best answer. All other frequencies will
-	   also use the equation. JDW */
-	if (rate == 44100)
-		delta = 0xeb3;
-	else if (rate == 8000)
-		delta = 0x2ab;
-	else if (rate == 48000)
-		delta = 0x1000;
-	else
-		delta = (((rate << 12) + rate) / 48000) & 0x0000ffff;
-	return delta;
-}
-
-static int
-compute_rate_rec(u32 rate)
-{
-	int delta;
-
-	if (rate == 44100)
-		delta = 0x116a;
-	else if (rate == 8000)
-		delta = 0x6000;
-	else if (rate == 48000)
-		delta = 0x1000;
-	else
-		delta = ((48000 << 12) / rate) & 0x0000ffff;
-
-	return delta;
-}
-
-/* set playback sample rate */
-static unsigned int
-trident_set_dac_rate(struct trident_state *state, unsigned int rate)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-
-	if (rate > 48000)
-		rate = 48000;
-	if (rate < 4000)
-		rate = 4000;
-
-	dmabuf->rate = rate;
-	dmabuf->channel->delta = compute_rate_play(rate);
-
-	trident_write_voice_regs(state);
-
-	pr_debug("trident: called trident_set_dac_rate : rate = %d\n", rate);
-
-	return rate;
-}
-
-/* set recording sample rate */
-static unsigned int
-trident_set_adc_rate(struct trident_state *state, unsigned int rate)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-
-	if (rate > 48000)
-		rate = 48000;
-	if (rate < 4000)
-		rate = 4000;
-
-	dmabuf->rate = rate;
-	dmabuf->channel->delta = compute_rate_rec(rate);
-
-	trident_write_voice_regs(state);
-
-	pr_debug("trident: called trident_set_adc_rate : rate = %d\n", rate);
-
-	return rate;
-}
-
-/* prepare channel attributes for playback */
-static void
-trident_play_setup(struct trident_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	struct trident_channel *channel = dmabuf->channel;
-
-	channel->lba = dmabuf->dma_handle;
-	channel->delta = compute_rate_play(dmabuf->rate);
-
-	channel->eso = dmabuf->dmasize >> sample_shift[dmabuf->fmt];
-	channel->eso -= 1;
-
-	if (state->card->pci_id != PCI_DEVICE_ID_SI_7018) {
-		channel->attribute = 0;
-		if (state->card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-			if ((channel->num == ALI_SPDIF_IN_CHANNEL) ||
-			    (channel->num == ALI_PCM_IN_CHANNEL))
-				ali_disable_special_channel(state->card, channel->num);
-			else if ((inl(TRID_REG(state->card, ALI_GLOBAL_CONTROL))
-				  & ALI_SPDIF_OUT_CH_ENABLE)
-				 && (channel->num == ALI_SPDIF_OUT_CHANNEL)) {
-				ali_set_spdif_out_rate(state->card,
-						       state->dmabuf.rate);
-				state->dmabuf.channel->delta = 0x1000;
-			}
-		}
-	}
-
-	channel->fm_vol = 0x0;
-
-	channel->control = CHANNEL_LOOP;
-	if (dmabuf->fmt & TRIDENT_FMT_16BIT) {
-		/* 16-bits */
-		channel->control |= CHANNEL_16BITS;
-		/* signed */
-		channel->control |= CHANNEL_SIGNED;
-	}
-	if (dmabuf->fmt & TRIDENT_FMT_STEREO)
-		/* stereo */
-		channel->control |= CHANNEL_STEREO;
-
-	pr_debug("trident: trident_play_setup, LBA = 0x%08x, Delta = 0x%08x, "
-		 "ESO = 0x%08x, Control = 0x%08x\n", channel->lba,
-		 channel->delta, channel->eso, channel->control);
-
-	trident_write_voice_regs(state);
-}
-
-/* prepare channel attributes for recording */
-static void
-trident_rec_setup(struct trident_state *state)
-{
-	u16 w;
-	u8 bval;
-
-	struct trident_card *card = state->card;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	struct trident_channel *channel = dmabuf->channel;
-	unsigned int rate;
-
-	/* Enable AC-97 ADC (capture) */
-	switch (card->pci_id) {
-	case PCI_DEVICE_ID_ALI_5451:
-		ali_enable_special_channel(state);
-		break;
-	case PCI_DEVICE_ID_SI_7018:
-		/* for 7018, the ac97 is always in playback/record (duplex) mode */
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_DX:
-		w = inb(TRID_REG(card, DX_ACR2_AC97_COM_STAT));
-		outb(w | 0x48, TRID_REG(card, DX_ACR2_AC97_COM_STAT));
-		/* enable and set record channel */
-		outb(0x80 | channel->num, TRID_REG(card, T4D_REC_CH));
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_NX:
-		w = inw(TRID_REG(card, T4D_MISCINT));
-		outw(w | 0x1000, TRID_REG(card, T4D_MISCINT));
-		/* enable and set record channel */
-		outb(0x80 | channel->num, TRID_REG(card, T4D_REC_CH));
-		break;
-	case PCI_DEVICE_ID_INTERG_5050:
-		/* don't know yet, using special channel 22 in GC1(0xd4)? */
-		break;
-	default:
-		return;
-	}
-
-	channel->lba = dmabuf->dma_handle;
-	channel->delta = compute_rate_rec(dmabuf->rate);
-	if ((card->pci_id == PCI_DEVICE_ID_ALI_5451) &&
-	    (channel->num == ALI_SPDIF_IN_CHANNEL)) {
-		rate = ali_get_spdif_in_rate(card);
-		if (rate == 0) {
-			printk(KERN_WARNING "trident: ALi 5451 "
-			       "S/PDIF input setup error!\n");
-			rate = 48000;
-		}
-		bval = inb(TRID_REG(card, ALI_SPDIF_CTRL));
-		if (bval & 0x10) {
-			outb(bval, TRID_REG(card, ALI_SPDIF_CTRL));
-			printk(KERN_WARNING "trident: cleared ALi "
-			       "5451 S/PDIF parity error flag.\n");
-		}
-
-		if (rate != 48000)
-			channel->delta = ((rate << 12) / dmabuf->rate) & 0x0000ffff;
-	}
-
-	channel->eso = dmabuf->dmasize >> sample_shift[dmabuf->fmt];
-	channel->eso -= 1;
-
-	if (state->card->pci_id != PCI_DEVICE_ID_SI_7018) {
-		channel->attribute = 0;
-	}
-
-	channel->fm_vol = 0x0;
-
-	channel->control = CHANNEL_LOOP;
-	if (dmabuf->fmt & TRIDENT_FMT_16BIT) {
-		/* 16-bits */
-		channel->control |= CHANNEL_16BITS;
-		/* signed */
-		channel->control |= CHANNEL_SIGNED;
-	}
-	if (dmabuf->fmt & TRIDENT_FMT_STEREO)
-		/* stereo */
-		channel->control |= CHANNEL_STEREO;
-
-	pr_debug("trident: trident_rec_setup, LBA = 0x%08x, Delat = 0x%08x, "
-		 "ESO = 0x%08x, Control = 0x%08x\n", channel->lba,
-		 channel->delta, channel->eso, channel->control);
-
-	trident_write_voice_regs(state);
-}
-
-/* get current playback/recording dma buffer pointer (byte offset from LBA),
-   called with spinlock held! */
-static inline unsigned
-trident_get_dma_addr(struct trident_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	u32 cso;
-
-	if (!dmabuf->enable)
-		return 0;
-
-	outb(dmabuf->channel->num, TRID_REG(state->card, T4D_LFO_GC_CIR));
-
-	switch (state->card->pci_id) {
-	case PCI_DEVICE_ID_ALI_5451:
-	case PCI_DEVICE_ID_SI_7018:
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_DX:
-	case PCI_DEVICE_ID_INTERG_5050:
-		/* 16 bits ESO, CSO for 7018 and DX */
-		cso = inw(TRID_REG(state->card, CH_DX_CSO_ALPHA_FMS + 2));
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_NX:
-		/* 24 bits ESO, CSO for NX */
-		cso = inl(TRID_REG(state->card, CH_NX_DELTA_CSO)) & 0x00ffffff;
-		break;
-	default:
-		return 0;
-	}
-
-	pr_debug("trident: trident_get_dma_addr: chip reported channel: %d, "
-		 "cso = 0x%04x\n", dmabuf->channel->num, cso);
-
-	/* ESO and CSO are in units of Samples, convert to byte offset */
-	cso <<= sample_shift[dmabuf->fmt];
-
-	return (cso % dmabuf->dmasize);
-}
-
-/* Stop recording (lock held) */
-static inline void
-__stop_adc(struct trident_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned int chan_num = dmabuf->channel->num;
-	struct trident_card *card = state->card;
-
-	dmabuf->enable &= ~ADC_RUNNING;
-	trident_stop_voice(card, chan_num);
-	trident_disable_voice_irq(card, chan_num);
-}
-
-static void
-stop_adc(struct trident_state *state)
-{
-	struct trident_card *card = state->card;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-	__stop_adc(state);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-static void
-start_adc(struct trident_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned int chan_num = dmabuf->channel->num;
-	struct trident_card *card = state->card;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-	if ((dmabuf->mapped ||
-	     dmabuf->count < (signed) dmabuf->dmasize) &&
-	    dmabuf->ready) {
-		dmabuf->enable |= ADC_RUNNING;
-		trident_enable_voice_irq(card, chan_num);
-		trident_start_voice(card, chan_num);
-	}
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-/* stop playback (lock held) */
-static inline void
-__stop_dac(struct trident_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned int chan_num = dmabuf->channel->num;
-	struct trident_card *card = state->card;
-
-	dmabuf->enable &= ~DAC_RUNNING;
-	trident_stop_voice(card, chan_num);
-	if (state->chans_num == 6) {
-		trident_stop_voice(card, state->other_states[0]->
-				   dmabuf.channel->num);
-		trident_stop_voice(card, state->other_states[1]->
-				   dmabuf.channel->num);
-		trident_stop_voice(card, state->other_states[2]->
-				   dmabuf.channel->num);
-		trident_stop_voice(card, state->other_states[3]->
-				   dmabuf.channel->num);
-	}
-	trident_disable_voice_irq(card, chan_num);
-}
-
-static void
-stop_dac(struct trident_state *state)
-{
-	struct trident_card *card = state->card;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-	__stop_dac(state);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-static void
-start_dac(struct trident_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned int chan_num = dmabuf->channel->num;
-	struct trident_card *card = state->card;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-	if ((dmabuf->mapped || dmabuf->count > 0) && dmabuf->ready) {
-		dmabuf->enable |= DAC_RUNNING;
-		trident_enable_voice_irq(card, chan_num);
-		trident_start_voice(card, chan_num);
-		if (state->chans_num == 6) {
-			trident_start_voice(card, state->other_states[0]->
-					    dmabuf.channel->num);
-			trident_start_voice(card, state->other_states[1]->
-					    dmabuf.channel->num);
-			trident_start_voice(card, state->other_states[2]->
-					    dmabuf.channel->num);
-			trident_start_voice(card, state->other_states[3]->
-					    dmabuf.channel->num);
-		}
-	}
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-#define DMABUF_DEFAULTORDER (15-PAGE_SHIFT)
-#define DMABUF_MINORDER 1
-
-/* alloc a DMA buffer of with a buffer of this order */
-static int
-alloc_dmabuf(struct dmabuf *dmabuf, struct pci_dev *pci_dev, int order)
-{
-	void *rawbuf = NULL;
-	struct page *page, *pend;
-
-	if (!(rawbuf = pci_alloc_consistent(pci_dev, PAGE_SIZE << order,
-					    &dmabuf->dma_handle)))
-		return -ENOMEM;
-
-	pr_debug("trident: allocated %ld (order = %d) bytes at %p\n",
-		 PAGE_SIZE << order, order, rawbuf);
-
-	dmabuf->ready = dmabuf->mapped = 0;
-	dmabuf->rawbuf = rawbuf;
-	dmabuf->buforder = order;
-
-	/* now mark the pages as reserved; otherwise */
-	/* remap_pfn_range doesn't do what we want */
-	pend = virt_to_page(rawbuf + (PAGE_SIZE << order) - 1);
-	for (page = virt_to_page(rawbuf); page <= pend; page++)
-		SetPageReserved(page);
-
-	return 0;
-}
-
-/* allocate the main DMA buffer, playback and recording buffer should be */
-/* allocated separately */
-static int
-alloc_main_dmabuf(struct trident_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	int order;
-	int ret = -ENOMEM;
-
-	/* alloc as big a chunk as we can, FIXME: is this necessary ?? */
-	for (order = DMABUF_DEFAULTORDER; order >= DMABUF_MINORDER; order--) {
-		if (!(ret = alloc_dmabuf(dmabuf, state->card->pci_dev, order)))
-			return 0;
-		/* else try again */
-	}
-	return ret;
-}
-
-/* deallocate a DMA buffer */
-static void
-dealloc_dmabuf(struct dmabuf *dmabuf, struct pci_dev *pci_dev)
-{
-	struct page *page, *pend;
-
-	if (dmabuf->rawbuf) {
-		/* undo marking the pages as reserved */
-		pend = virt_to_page(dmabuf->rawbuf + (PAGE_SIZE << dmabuf->buforder) - 1);
-		for (page = virt_to_page(dmabuf->rawbuf); page <= pend; page++)
-			ClearPageReserved(page);
-		pci_free_consistent(pci_dev, PAGE_SIZE << dmabuf->buforder,
-				    dmabuf->rawbuf, dmabuf->dma_handle);
-		dmabuf->rawbuf = NULL;
-	}
-	dmabuf->mapped = dmabuf->ready = 0;
-}
-
-static int
-prog_dmabuf(struct trident_state *state, enum dmabuf_mode rec)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned bytepersec;
-	struct trident_state *s = state;
-	unsigned bufsize, dma_nums;
-	unsigned long flags;
-	int ret, i, order;
-
-	if ((ret = lock_set_fmt(state)) < 0)
-		return ret;
-
-	if (state->chans_num == 6)
-		dma_nums = 5;
-	else
-		dma_nums = 1;
-
-	for (i = 0; i < dma_nums; i++) {
-		if (i > 0) {
-			s = state->other_states[i - 1];
-			dmabuf = &s->dmabuf;
-			dmabuf->fmt = state->dmabuf.fmt;
-			dmabuf->rate = state->dmabuf.rate;
-		}
-
-		spin_lock_irqsave(&s->card->lock, flags);
-		dmabuf->hwptr = dmabuf->swptr = dmabuf->total_bytes = 0;
-		dmabuf->count = dmabuf->error = 0;
-		spin_unlock_irqrestore(&s->card->lock, flags);
-
-		/* allocate DMA buffer if not allocated yet */
-		if (!dmabuf->rawbuf) {
-			if (i == 0) {
-				if ((ret = alloc_main_dmabuf(state))) {
-					unlock_set_fmt(state);
-					return ret;
-				}
-			} else {
-				ret = -ENOMEM;
-				order = state->dmabuf.buforder - 1;
-				if (order >= DMABUF_MINORDER) {
-					ret = alloc_dmabuf(dmabuf,
-							   state->card->pci_dev,
-							   order);
-				}
-				if (ret) {
-					/* release the main DMA buffer */
-					dealloc_dmabuf(&state->dmabuf, state->card->pci_dev);
-					/* release the auxiliary DMA buffers */
-					for (i -= 2; i >= 0; i--)
-						dealloc_dmabuf(&state->other_states[i]->dmabuf,
-							       state->card->pci_dev);
-					unlock_set_fmt(state);
-					return ret;
-				}
-			}
-		}
-		/* FIXME: figure out all this OSS fragment stuff */
-		bytepersec = dmabuf->rate << sample_shift[dmabuf->fmt];
-		bufsize = PAGE_SIZE << dmabuf->buforder;
-		if (dmabuf->ossfragshift) {
-			if ((1000 << dmabuf->ossfragshift) < bytepersec)
-				dmabuf->fragshift = ld2(bytepersec / 1000);
-			else
-				dmabuf->fragshift = dmabuf->ossfragshift;
-		} else {
-			/* lets hand out reasonable big ass buffers by default */
-			dmabuf->fragshift = (dmabuf->buforder + PAGE_SHIFT - 2);
-		}
-		dmabuf->numfrag = bufsize >> dmabuf->fragshift;
-		while (dmabuf->numfrag < 4 && dmabuf->fragshift > 3) {
-			dmabuf->fragshift--;
-			dmabuf->numfrag = bufsize >> dmabuf->fragshift;
-		}
-		dmabuf->fragsize = 1 << dmabuf->fragshift;
-		if (dmabuf->ossmaxfrags >= 4 && dmabuf->ossmaxfrags < dmabuf->numfrag)
-			dmabuf->numfrag = dmabuf->ossmaxfrags;
-		dmabuf->fragsamples = dmabuf->fragsize >> sample_shift[dmabuf->fmt];
-		dmabuf->dmasize = dmabuf->numfrag << dmabuf->fragshift;
-
-		memset(dmabuf->rawbuf, (dmabuf->fmt & TRIDENT_FMT_16BIT) ? 0 : 0x80,
-		       dmabuf->dmasize);
-
-		spin_lock_irqsave(&s->card->lock, flags);
-		if (rec == DM_RECORD)
-			trident_rec_setup(s);
-		else /* DM_PLAYBACK */
-			trident_play_setup(s);
-
-		spin_unlock_irqrestore(&s->card->lock, flags);
-
-		/* set the ready flag for the dma buffer */
-		dmabuf->ready = 1;
-
-		pr_debug("trident: prog_dmabuf(%d), sample rate = %d, "
-			 "format = %d, numfrag = %d, fragsize = %d "
-			 "dmasize = %d\n", dmabuf->channel->num,
-			 dmabuf->rate, dmabuf->fmt, dmabuf->numfrag,
-			 dmabuf->fragsize, dmabuf->dmasize);
-	}
-	unlock_set_fmt(state);
-	return 0;
-}
-
-
-static inline int prog_dmabuf_record(struct trident_state* state)
-{
-	return prog_dmabuf(state, DM_RECORD);
-}
-
-static inline int prog_dmabuf_playback(struct trident_state* state)
-{
-	return prog_dmabuf(state, DM_PLAYBACK);
-}
-
-/* we are doing quantum mechanics here, the buffer can only be empty, half or full filled i.e.
-   |------------|------------|   or   |xxxxxxxxxxxx|------------|   or   |xxxxxxxxxxxx|xxxxxxxxxxxx|
-   but we almost always get this
-   |xxxxxx------|------------|   or   |xxxxxxxxxxxx|xxxxx-------|
-   so we have to clear the tail space to "silence"
-   |xxxxxx000000|------------|   or   |xxxxxxxxxxxx|xxxxxx000000|
-*/
-static void
-trident_clear_tail(struct trident_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned swptr;
-	unsigned char silence = (dmabuf->fmt & TRIDENT_FMT_16BIT) ? 0 : 0x80;
-	unsigned int len;
-	unsigned long flags;
-
-	spin_lock_irqsave(&state->card->lock, flags);
-	swptr = dmabuf->swptr;
-	spin_unlock_irqrestore(&state->card->lock, flags);
-
-	if (swptr == 0 || swptr == dmabuf->dmasize / 2 ||
-	    swptr == dmabuf->dmasize)
-		return;
-
-	if (swptr < dmabuf->dmasize / 2)
-		len = dmabuf->dmasize / 2 - swptr;
-	else
-		len = dmabuf->dmasize - swptr;
-
-	memset(dmabuf->rawbuf + swptr, silence, len);
-	if (state->card->pci_id != PCI_DEVICE_ID_ALI_5451) {
-		spin_lock_irqsave(&state->card->lock, flags);
-		dmabuf->swptr += len;
-		dmabuf->count += len;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-	}
-
-	/* restart the dma machine in case it is halted */
-	start_dac(state);
-}
-
-static int
-drain_dac(struct trident_state *state, int nonblock)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned long flags;
-	unsigned long tmo;
-	int count;
-	unsigned long diff = 0;
-
-	if (dmabuf->mapped || !dmabuf->ready)
-		return 0;
-
-	add_wait_queue(&dmabuf->wait, &wait);
-	for (;;) {
-		/* It seems that we have to set the current state to TASK_INTERRUPTIBLE
-		   every time to make the process really go to sleep */
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		spin_lock_irqsave(&state->card->lock, flags);
-		count = dmabuf->count;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-
-		if (count <= 0)
-			break;
-
-		if (signal_pending(current))
-			break;
-
-		if (nonblock) {
-			remove_wait_queue(&dmabuf->wait, &wait);
-			set_current_state(TASK_RUNNING);
-			return -EBUSY;
-		}
-
-		/* No matter how much data is left in the buffer, we have to wait until
-		   CSO == ESO/2 or CSO == ESO when address engine interrupts */
-		if (state->card->pci_id == PCI_DEVICE_ID_ALI_5451 ||
-		    state->card->pci_id == PCI_DEVICE_ID_INTERG_5050) {
-			diff = dmabuf->swptr - trident_get_dma_addr(state) + dmabuf->dmasize;
-			diff = diff % (dmabuf->dmasize);
-			tmo = (diff * HZ) / dmabuf->rate;
-		} else {
-			tmo = (dmabuf->dmasize * HZ) / dmabuf->rate;
-		}
-		tmo >>= sample_shift[dmabuf->fmt];
-		if (!schedule_timeout(tmo ? tmo : 1) && tmo) {
-			break;
-		}
-	}
-	remove_wait_queue(&dmabuf->wait, &wait);
-	set_current_state(TASK_RUNNING);
-	if (signal_pending(current))
-		return -ERESTARTSYS;
-
-	return 0;
-}
-
-/* update buffer manangement pointers, especially, */
-/* dmabuf->count and dmabuf->hwptr */
-static void
-trident_update_ptr(struct trident_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned hwptr, swptr;
-	int clear_cnt = 0;
-	int diff;
-	unsigned char silence;
-	unsigned half_dmasize;
-
-	/* update hardware pointer */
-	hwptr = trident_get_dma_addr(state);
-	diff = (dmabuf->dmasize + hwptr - dmabuf->hwptr) % dmabuf->dmasize;
-	dmabuf->hwptr = hwptr;
-	dmabuf->total_bytes += diff;
-
-	/* error handling and process wake up for ADC */
-	if (dmabuf->enable == ADC_RUNNING) {
-		if (dmabuf->mapped) {
-			dmabuf->count -= diff;
-			if (dmabuf->count >= (signed) dmabuf->fragsize)
-				wake_up(&dmabuf->wait);
-		} else {
-			dmabuf->count += diff;
-
-			if (dmabuf->count < 0 ||
-			    dmabuf->count > dmabuf->dmasize) {
-				/* buffer underrun or buffer overrun, */
-				/* we have no way to recover it here, just */
-				/* stop the machine and let the process */
-				/* force hwptr and swptr to sync */
-				__stop_adc(state);
-				dmabuf->error++;
-			}
-			if (dmabuf->count < (signed) dmabuf->dmasize / 2)
-				wake_up(&dmabuf->wait);
-		}
-	}
-
-	/* error handling and process wake up for DAC */
-	if (dmabuf->enable == DAC_RUNNING) {
-		if (dmabuf->mapped) {
-			dmabuf->count += diff;
-			if (dmabuf->count >= (signed) dmabuf->fragsize)
-				wake_up(&dmabuf->wait);
-		} else {
-			dmabuf->count -= diff;
-
-			if (dmabuf->count < 0 ||
-			    dmabuf->count > dmabuf->dmasize) {
-				/* buffer underrun or buffer overrun, we have no way to recover
-				   it here, just stop the machine and let the process force hwptr
-				   and swptr to sync */
-				__stop_dac(state);
-				dmabuf->error++;
-			} else if (!dmabuf->endcleared) {
-				swptr = dmabuf->swptr;
-				silence = (dmabuf->fmt & TRIDENT_FMT_16BIT ? 0 : 0x80);
-				if (dmabuf->update_flag & ALI_ADDRESS_INT_UPDATE) {
-					/* We must clear end data of 1/2 dmabuf if needed.
-					   According to 1/2 algorithm of Address Engine Interrupt,
-					   check the validation of the data of half dmasize. */
-					half_dmasize = dmabuf->dmasize / 2;
-					if ((diff = hwptr - half_dmasize) < 0)
-						diff = hwptr;
-					if ((dmabuf->count + diff) < half_dmasize) {
-						//there is invalid data in the end of half buffer
-						if ((clear_cnt = half_dmasize - swptr) < 0)
-							clear_cnt += half_dmasize;
-						//clear the invalid data
-						memset(dmabuf->rawbuf + swptr, silence, clear_cnt);
-						if (state->chans_num == 6) {
-							clear_cnt = clear_cnt / 2;
-							swptr = swptr / 2;
-							memset(state->other_states[0]->dmabuf.rawbuf + swptr,
-							       silence, clear_cnt);
-							memset(state->other_states[1]->dmabuf.rawbuf + swptr,
-							       silence, clear_cnt);
-							memset(state->other_states[2]->dmabuf.rawbuf + swptr,
-							       silence, clear_cnt);
-							memset(state->other_states[3]->dmabuf.rawbuf + swptr,
-							       silence, clear_cnt);
-						}
-						dmabuf->endcleared = 1;
-					}
-				} else if (dmabuf->count < (signed) dmabuf->fragsize) {
-					clear_cnt = dmabuf->fragsize;
-					if ((swptr + clear_cnt) > dmabuf->dmasize)
-						clear_cnt = dmabuf->dmasize - swptr;
-					memset(dmabuf->rawbuf + swptr, silence, clear_cnt);
-					if (state->chans_num == 6) {
-						clear_cnt = clear_cnt / 2;
-						swptr = swptr / 2;
-						memset(state->other_states[0]->dmabuf.rawbuf + swptr,
-						       silence, clear_cnt);
-						memset(state->other_states[1]->dmabuf.rawbuf + swptr,
-						       silence, clear_cnt);
-						memset(state->other_states[2]->dmabuf.rawbuf + swptr,
-						       silence, clear_cnt);
-						memset(state->other_states[3]->dmabuf.rawbuf + swptr,
-						       silence, clear_cnt);
-					}
-					dmabuf->endcleared = 1;
-				}
-			}
-			/* trident_update_ptr is called by interrupt handler or by process via
-			   ioctl/poll, we only wake up the waiting process when we have more
-			   than 1/2 buffer free (always true for interrupt handler) */
-			if (dmabuf->count < (signed) dmabuf->dmasize / 2)
-				wake_up(&dmabuf->wait);
-		}
-	}
-	dmabuf->update_flag &= ~ALI_ADDRESS_INT_UPDATE;
-}
-
-static void
-trident_address_interrupt(struct trident_card *card)
-{
-	int i;
-	struct trident_state *state;
-	unsigned int channel;
-
-	/* Update the pointers for all channels we are running. */
-	/* FIXME: should read interrupt status only once */
-	for (i = 0; i < NR_HW_CH; i++) {
-		channel = 63 - i;
-		if (trident_check_channel_interrupt(card, channel)) {
-			trident_ack_channel_interrupt(card, channel);
-			if ((state = card->states[i]) != NULL) {
-				trident_update_ptr(state);
-			} else {
-				printk(KERN_WARNING "trident: spurious channel "
-				       "irq %d.\n", channel);
-				trident_stop_voice(card, channel);
-				trident_disable_voice_irq(card, channel);
-			}
-		}
-	}
-}
-
-static void
-ali_hwvol_control(struct trident_card *card, int opt)
-{
-	u16 dwTemp, volume[2], mute, diff, *pVol[2];
-
-	dwTemp = ali_ac97_read(card->ac97_codec[0], 0x02);
-	mute = dwTemp & 0x8000;
-	volume[0] = dwTemp & 0x001f;
-	volume[1] = (dwTemp & 0x1f00) >> 8;
-	if (volume[0] < volume[1]) {
-		pVol[0] = &volume[0];
-		pVol[1] = &volume[1];
-	} else {
-		pVol[1] = &volume[0];
-		pVol[0] = &volume[1];
-	}
-	diff = *(pVol[1]) - *(pVol[0]);
-
-	if (opt == 1) {		// MUTE
-		dwTemp ^= 0x8000;
-		ali_ac97_write(card->ac97_codec[0],
-			       0x02, dwTemp);
-	} else if (opt == 2) {	// Down
-		if (mute)
-			return;
-		if (*(pVol[1]) < 0x001f) {
-			(*pVol[1])++;
-			*(pVol[0]) = *(pVol[1]) - diff;
-		}
-		dwTemp &= 0xe0e0;
-		dwTemp |= (volume[0]) | (volume[1] << 8);
-		ali_ac97_write(card->ac97_codec[0], 0x02, dwTemp);
-		card->ac97_codec[0]->mixer_state[0] = ((32 - volume[0]) * 25 / 8) |
-			(((32 - volume[1]) * 25 / 8) << 8);
-	} else if (opt == 4) {	// Up
-		if (mute)
-			return;
-		if (*(pVol[0]) > 0) {
-			(*pVol[0])--;
-			*(pVol[1]) = *(pVol[0]) + diff;
-		}
-		dwTemp &= 0xe0e0;
-		dwTemp |= (volume[0]) | (volume[1] << 8);
-		ali_ac97_write(card->ac97_codec[0], 0x02, dwTemp);
-		card->ac97_codec[0]->mixer_state[0] = ((32 - volume[0]) * 25 / 8) |
-			(((32 - volume[1]) * 25 / 8) << 8);
-	} else {
-		/* Nothing needs doing */
-	}
-}
-
-/*
- *	Re-enable reporting of vol change after 0.1 seconds
- */
-
-static void
-ali_timeout(unsigned long ptr)
-{
-	struct trident_card *card = (struct trident_card *) ptr;
-	u16 temp = 0;
-
-	/* Enable GPIO IRQ (MISCINT bit 18h) */
-	temp = inw(TRID_REG(card, T4D_MISCINT + 2));
-	temp |= 0x0004;
-	outw(temp, TRID_REG(card, T4D_MISCINT + 2));
-}
-
-/*
- *	Set up the timer to clear the vol change notification
- */
-
-static void
-ali_set_timer(struct trident_card *card)
-{
-	/* Add Timer Routine to Enable GPIO IRQ */
-	del_timer(&card->timer);	/* Never queue twice */
-	card->timer.function = ali_timeout;
-	card->timer.data = (unsigned long) card;
-	card->timer.expires = jiffies + HZ / 10;
-	add_timer(&card->timer);
-}
-
-/*
- *	Process a GPIO event
- */
-
-static void
-ali_queue_task(struct trident_card *card, int opt)
-{
-	u16 temp;
-
-	/* Disable GPIO IRQ (MISCINT bit 18h) */
-	temp = inw(TRID_REG(card, T4D_MISCINT + 2));
-	temp &= (u16) (~0x0004);
-	outw(temp, TRID_REG(card, T4D_MISCINT + 2));
-
-	/* Adjust the volume */
-	ali_hwvol_control(card, opt);
-
-	/* Set the timer for 1/10th sec */
-	ali_set_timer(card);
-}
-
-static void
-cyber_address_interrupt(struct trident_card *card)
-{
-	int i, irq_status;
-	struct trident_state *state;
-	unsigned int channel;
-
-	/* Update the pointers for all channels we are running. */
-	/* FIXED: read interrupt status only once */
-	irq_status = inl(TRID_REG(card, T4D_AINT_A));
-
-	pr_debug("cyber_address_interrupt: irq_status 0x%X\n", irq_status);
-
-	for (i = 0; i < NR_HW_CH; i++) {
-		channel = 31 - i;
-		if (irq_status & (1 << channel)) {
-			/* clear bit by writing a 1, zeroes are ignored */
-			outl((1 << channel), TRID_REG(card, T4D_AINT_A));
-
-			pr_debug("cyber_interrupt: channel %d\n", channel);
-
-			if ((state = card->states[i]) != NULL) {
-				trident_update_ptr(state);
-			} else {
-				printk(KERN_WARNING "cyber5050: spurious "
-				       "channel irq %d.\n", channel);
-				trident_stop_voice(card, channel);
-				trident_disable_voice_irq(card, channel);
-			}
-		}
-	}
-}
-
-static irqreturn_t
-trident_interrupt(int irq, void *dev_id)
-{
-	struct trident_card *card = (struct trident_card *) dev_id;
-	u32 event;
-	u32 gpio;
-
-	spin_lock(&card->lock);
-	event = inl(TRID_REG(card, T4D_MISCINT));
-
-	pr_debug("trident: trident_interrupt called, MISCINT = 0x%08x\n",
-		 event);
-
-	if (event & ADDRESS_IRQ) {
-		card->address_interrupt(card);
-	}
-
-	if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-		/* GPIO IRQ (H/W Volume Control) */
-		event = inl(TRID_REG(card, T4D_MISCINT));
-		if (event & (1 << 25)) {
-			gpio = inl(TRID_REG(card, ALI_GPIO));
-			if (!timer_pending(&card->timer))
-				ali_queue_task(card, gpio & 0x07);
-		}
-		event = inl(TRID_REG(card, T4D_MISCINT));
-		outl(event | (ST_TARGET_REACHED | MIXER_OVERFLOW | MIXER_UNDERFLOW),
-		     TRID_REG(card, T4D_MISCINT));
-		spin_unlock(&card->lock);
-		return IRQ_HANDLED;
-	}
-
-	/* manually clear interrupt status, bad hardware design, blame T^2 */
-	outl((ST_TARGET_REACHED | MIXER_OVERFLOW | MIXER_UNDERFLOW),
-	     TRID_REG(card, T4D_MISCINT));
-	spin_unlock(&card->lock);
-	return IRQ_HANDLED;
-}
-
-/* in this loop, dmabuf.count signifies the amount of data that is waiting */
-/* to be copied to the user's buffer.  it is filled by the dma machine and */
-/* drained by this loop. */
-static ssize_t
-trident_read(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
-{
-	struct trident_state *state = (struct trident_state *)file->private_data;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	ssize_t ret = 0;
-	unsigned long flags;
-	unsigned swptr;
-	int cnt;
-
-	pr_debug("trident: trident_read called, count = %zd\n", count);
-
-	VALIDATE_STATE(state);
-
-	if (dmabuf->mapped)
-		return -ENXIO;
-	if (!access_ok(VERIFY_WRITE, buffer, count))
-		return -EFAULT;
-
-	mutex_lock(&state->sem);
-	if (!dmabuf->ready && (ret = prog_dmabuf_record(state)))
-		goto out;
-
-	while (count > 0) {
-		spin_lock_irqsave(&state->card->lock, flags);
-		if (dmabuf->count > (signed) dmabuf->dmasize) {
-			/* buffer overrun, we are recovering from */
-			/* sleep_on_timeout, resync hwptr and swptr, */
-			/* make process flush the buffer */
-			dmabuf->count = dmabuf->dmasize;
-			dmabuf->swptr = dmabuf->hwptr;
-		}
-		swptr = dmabuf->swptr;
-		cnt = dmabuf->dmasize - swptr;
-		if (dmabuf->count < cnt)
-			cnt = dmabuf->count;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-
-		if (cnt > count)
-			cnt = count;
-		if (cnt <= 0) {
-			unsigned long tmo;
-			/* buffer is empty, start the dma machine and */
-			/* wait for data to be recorded */
-			start_adc(state);
-			if (file->f_flags & O_NONBLOCK) {
-				if (!ret)
-					ret = -EAGAIN;
-				goto out;
-			}
-
-			mutex_unlock(&state->sem);
-			/* No matter how much space left in the buffer, */
-			/* we have to wait until CSO == ESO/2 or CSO == ESO */
-			/* when address engine interrupts */
-			tmo = (dmabuf->dmasize * HZ) / (dmabuf->rate * 2);
-			tmo >>= sample_shift[dmabuf->fmt];
-			/* There are two situations when sleep_on_timeout returns, one is when
-			   the interrupt is serviced correctly and the process is waked up by
-			   ISR ON TIME. Another is when timeout is expired, which means that
-			   either interrupt is NOT serviced correctly (pending interrupt) or it
-			   is TOO LATE for the process to be scheduled to run (scheduler latency)
-			   which results in a (potential) buffer overrun. And worse, there is
-			   NOTHING we can do to prevent it. */
-			if (!interruptible_sleep_on_timeout(&dmabuf->wait, tmo)) {
-				pr_debug(KERN_ERR "trident: recording schedule timeout, "
-					 "dmasz %u fragsz %u count %i hwptr %u swptr %u\n",
-					 dmabuf->dmasize, dmabuf->fragsize, dmabuf->count,
-					 dmabuf->hwptr, dmabuf->swptr);
-
-				/* a buffer overrun, we delay the recovery until next time the
-				   while loop begin and we REALLY have space to record */
-			}
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				goto out;
-			}
-			mutex_lock(&state->sem);
-			if (dmabuf->mapped) {
-				if (!ret)
-					ret = -ENXIO;
-				goto out;
-			}
-			continue;
-		}
-
-		if (copy_to_user(buffer, dmabuf->rawbuf + swptr, cnt)) {
-			if (!ret)
-				ret = -EFAULT;
-			goto out;
-		}
-
-		swptr = (swptr + cnt) % dmabuf->dmasize;
-
-		spin_lock_irqsave(&state->card->lock, flags);
-		dmabuf->swptr = swptr;
-		dmabuf->count -= cnt;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-		start_adc(state);
-	}
-out:
-	mutex_unlock(&state->sem);
-	return ret;
-}
-
-/* in this loop, dmabuf.count signifies the amount of data that is waiting to be dma to
-   the soundcard.  it is drained by the dma machine and filled by this loop. */
-
-static ssize_t
-trident_write(struct file *file, const char __user *buffer, size_t count, loff_t * ppos)
-{
-	struct trident_state *state = (struct trident_state *)file->private_data;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	ssize_t ret;
-	unsigned long flags;
-	unsigned swptr;
-	int cnt;
-	unsigned int state_cnt;
-	unsigned int copy_count;
-	int lret; /* for lock_set_fmt */
-
-	pr_debug("trident: trident_write called, count = %zd\n", count);
-
-	VALIDATE_STATE(state);
-
-	/*
-	 *      Guard against an mmap or ioctl while writing
-	 */
-
-	mutex_lock(&state->sem);
-
-	if (dmabuf->mapped) {
-		ret = -ENXIO;
-		goto out;
-	}
-	if (!dmabuf->ready && (ret = prog_dmabuf_playback(state)))
-		goto out;
-
-	if (!access_ok(VERIFY_READ, buffer, count)) {
-		ret = -EFAULT;
-		goto out;
-	}
-
-	ret = 0;
-
-	while (count > 0) {
-		spin_lock_irqsave(&state->card->lock, flags);
-		if (dmabuf->count < 0) {
-			/* buffer underrun, we are recovering from */
-			/* sleep_on_timeout, resync hwptr and swptr */
-			dmabuf->count = 0;
-			dmabuf->swptr = dmabuf->hwptr;
-		}
-		swptr = dmabuf->swptr;
-		cnt = dmabuf->dmasize - swptr;
-		if (dmabuf->count + cnt > dmabuf->dmasize)
-			cnt = dmabuf->dmasize - dmabuf->count;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-
-		if (cnt > count)
-			cnt = count;
-		if (cnt <= 0) {
-			unsigned long tmo;
-			/* buffer is full, start the dma machine and */
-			/* wait for data to be played */
-			start_dac(state);
-			if (file->f_flags & O_NONBLOCK) {
-				if (!ret)
-					ret = -EAGAIN;
-				goto out;
-			}
-			/* No matter how much data left in the buffer, */
-			/* we have to wait until CSO == ESO/2 or CSO == ESO */
-			/* when address engine interrupts */
-			lock_set_fmt(state);
-			tmo = (dmabuf->dmasize * HZ) / (dmabuf->rate * 2);
-			tmo >>= sample_shift[dmabuf->fmt];
-			unlock_set_fmt(state);
-			mutex_unlock(&state->sem);
-
-			/* There are two situations when sleep_on_timeout */
-			/* returns, one is when the interrupt is serviced */
-			/* correctly and the process is waked up by ISR */
-			/* ON TIME. Another is when timeout is expired, which */
-			/* means that either interrupt is NOT serviced */
-			/* correctly (pending interrupt) or it is TOO LATE */
-			/* for the process to be scheduled to run */
-			/* (scheduler latency) which results in a (potential) */
-			/* buffer underrun. And worse, there is NOTHING we */
-			/* can do to prevent it. */
-			if (!interruptible_sleep_on_timeout(&dmabuf->wait, tmo)) {
-				pr_debug(KERN_ERR "trident: playback schedule "
-					 "timeout, dmasz %u fragsz %u count %i "
-					 "hwptr %u swptr %u\n", dmabuf->dmasize,
-					 dmabuf->fragsize, dmabuf->count,
-					 dmabuf->hwptr, dmabuf->swptr);
-
-				/* a buffer underrun, we delay the recovery */
-				/* until next time the while loop begin and */
-				/* we REALLY have data to play */
-			}
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				goto out_nolock;
-			}
-			mutex_lock(&state->sem);
-			if (dmabuf->mapped) {
-				if (!ret)
-					ret = -ENXIO;
-				goto out;
-			}
-			continue;
-		}
-		if ((lret = lock_set_fmt(state)) < 0) {
-			ret = lret;
-			goto out;
-		}
-
-		if (state->chans_num == 6) {
-			copy_count = 0;
-			state_cnt = 0;
-			if (ali_write_5_1(state, buffer, cnt, &copy_count,
-					  &state_cnt) == -EFAULT) {
-				if (state_cnt) {
-					swptr = (swptr + state_cnt) % dmabuf->dmasize;
-					spin_lock_irqsave(&state->card->lock, flags);
-					dmabuf->swptr = swptr;
-					dmabuf->count += state_cnt;
-					dmabuf->endcleared = 0;
-					spin_unlock_irqrestore(&state->card->lock, flags);
-				}
-				ret += copy_count;
-				if (!ret)
-					ret = -EFAULT;
-				unlock_set_fmt(state);
-				goto out;
-			}
-		} else {
-			if (copy_from_user(dmabuf->rawbuf + swptr,
-					   buffer, cnt)) {
-				if (!ret)
-					ret = -EFAULT;
-				unlock_set_fmt(state);
-				goto out;
-			}
-			state_cnt = cnt;
-		}
-		unlock_set_fmt(state);
-
-		swptr = (swptr + state_cnt) % dmabuf->dmasize;
-
-		spin_lock_irqsave(&state->card->lock, flags);
-		dmabuf->swptr = swptr;
-		dmabuf->count += state_cnt;
-		dmabuf->endcleared = 0;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-		start_dac(state);
-	}
-out:
-	mutex_unlock(&state->sem);
-out_nolock:
-	return ret;
-}
-
-/* No kernel lock - we have our own spinlock */
-static unsigned int
-trident_poll(struct file *file, struct poll_table_struct *wait)
-{
-	struct trident_state *state = (struct trident_state *)file->private_data;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned long flags;
-	unsigned int mask = 0;
-
-	VALIDATE_STATE(state);
-
-	/*
-	 *      Guard against a parallel poll and write causing multiple
-	 *      prog_dmabuf events
-	 */
-
-	mutex_lock(&state->sem);
-
-	if (file->f_mode & FMODE_WRITE) {
-		if (!dmabuf->ready && prog_dmabuf_playback(state)) {
-			mutex_unlock(&state->sem);
-			return 0;
-		}
-		poll_wait(file, &dmabuf->wait, wait);
-	}
-	if (file->f_mode & FMODE_READ) {
-		if (!dmabuf->ready && prog_dmabuf_record(state)) {
-			mutex_unlock(&state->sem);
-			return 0;
-		}
-		poll_wait(file, &dmabuf->wait, wait);
-	}
-
-	mutex_unlock(&state->sem);
-
-	spin_lock_irqsave(&state->card->lock, flags);
-	trident_update_ptr(state);
-	if (file->f_mode & FMODE_READ) {
-		if (dmabuf->count >= (signed) dmabuf->fragsize)
-			mask |= POLLIN | POLLRDNORM;
-	}
-	if (file->f_mode & FMODE_WRITE) {
-		if (dmabuf->mapped) {
-			if (dmabuf->count >= (signed) dmabuf->fragsize)
-				mask |= POLLOUT | POLLWRNORM;
-		} else {
-			if ((signed) dmabuf->dmasize >= dmabuf->count +
-			    (signed) dmabuf->fragsize)
-				mask |= POLLOUT | POLLWRNORM;
-		}
-	}
-	spin_unlock_irqrestore(&state->card->lock, flags);
-
-	return mask;
-}
-
-static int
-trident_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct trident_state *state = (struct trident_state *)file->private_data;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	int ret = -EINVAL;
-	unsigned long size;
-
-	VALIDATE_STATE(state);
-
-	/*
-	 *      Lock against poll read write or mmap creating buffers. Also lock
-	 *      a read or write against an mmap.
-	 */
-
-	mutex_lock(&state->sem);
-
-	if (vma->vm_flags & VM_WRITE) {
-		if ((ret = prog_dmabuf_playback(state)) != 0)
-			goto out;
-	} else if (vma->vm_flags & VM_READ) {
-		if ((ret = prog_dmabuf_record(state)) != 0)
-			goto out;
-	} else
-		goto out;
-
-	ret = -EINVAL;
-	if (vma->vm_pgoff != 0)
-		goto out;
-	size = vma->vm_end - vma->vm_start;
-	if (size > (PAGE_SIZE << dmabuf->buforder))
-		goto out;
-	ret = -EAGAIN;
-	if (remap_pfn_range(vma, vma->vm_start,
-			     virt_to_phys(dmabuf->rawbuf) >> PAGE_SHIFT,
-			     size, vma->vm_page_prot))
-		goto out;
-	dmabuf->mapped = 1;
-	ret = 0;
-out:
-	mutex_unlock(&state->sem);
-	return ret;
-}
-
-static int
-trident_ioctl(struct inode *inode, struct file *file,
-	      unsigned int cmd, unsigned long arg)
-{
-	struct trident_state *state = (struct trident_state *)file->private_data;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned long flags;
-	audio_buf_info abinfo;
-	count_info cinfo;
-	int val, mapped, ret = 0;
-	struct trident_card *card = state->card;
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-
-	VALIDATE_STATE(state);
-
-
-	mapped = ((file->f_mode & (FMODE_WRITE | FMODE_READ)) && dmabuf->mapped);
-
-	pr_debug("trident: trident_ioctl, command = %2d, arg = 0x%08x\n",
-		 _IOC_NR(cmd), arg ? *p : 0);
-
-	switch (cmd) {
-	case OSS_GETVERSION:
-		ret = put_user(SOUND_VERSION, p);
-		break;
-
-	case SNDCTL_DSP_RESET:
-		/* FIXME: spin_lock ? */
-		if (file->f_mode & FMODE_WRITE) {
-			stop_dac(state);
-			synchronize_irq(card->irq);
-			dmabuf->ready = 0;
-			dmabuf->swptr = dmabuf->hwptr = 0;
-			dmabuf->count = dmabuf->total_bytes = 0;
-		}
-		if (file->f_mode & FMODE_READ) {
-			stop_adc(state);
-			synchronize_irq(card->irq);
-			dmabuf->ready = 0;
-			dmabuf->swptr = dmabuf->hwptr = 0;
-			dmabuf->count = dmabuf->total_bytes = 0;
-		}
-		break;
-
-	case SNDCTL_DSP_SYNC:
-		if (file->f_mode & FMODE_WRITE)
-			ret = drain_dac(state, file->f_flags & O_NONBLOCK);
-		break;
-
-	case SNDCTL_DSP_SPEED:	/* set smaple rate */
-		if (get_user(val, p)) {
-			ret = -EFAULT;
-			break;
-		}
-		if (val >= 0) {
-			if (file->f_mode & FMODE_WRITE) {
-				stop_dac(state);
-				dmabuf->ready = 0;
-				spin_lock_irqsave(&state->card->lock, flags);
-				trident_set_dac_rate(state, val);
-				spin_unlock_irqrestore(&state->card->lock, flags);
-			}
-			if (file->f_mode & FMODE_READ) {
-				stop_adc(state);
-				dmabuf->ready = 0;
-				spin_lock_irqsave(&state->card->lock, flags);
-				trident_set_adc_rate(state, val);
-				spin_unlock_irqrestore(&state->card->lock, flags);
-			}
-		}
-		ret = put_user(dmabuf->rate, p);
-		break;
-
-	case SNDCTL_DSP_STEREO:	/* set stereo or mono channel */
-		if (get_user(val, p)) {
-			ret = -EFAULT;
-			break;
-		}
-		if ((ret = lock_set_fmt(state)) < 0)
-			return ret;
-
-		if (file->f_mode & FMODE_WRITE) {
-			stop_dac(state);
-			dmabuf->ready = 0;
-			if (val)
-				dmabuf->fmt |= TRIDENT_FMT_STEREO;
-			else
-				dmabuf->fmt &= ~TRIDENT_FMT_STEREO;
-		}
-		if (file->f_mode & FMODE_READ) {
-			stop_adc(state);
-			dmabuf->ready = 0;
-			if (val)
-				dmabuf->fmt |= TRIDENT_FMT_STEREO;
-			else
-				dmabuf->fmt &= ~TRIDENT_FMT_STEREO;
-		}
-		unlock_set_fmt(state);
-		break;
-
-	case SNDCTL_DSP_GETBLKSIZE:
-		if (file->f_mode & FMODE_WRITE) {
-			if ((val = prog_dmabuf_playback(state)))
-				ret = val;
-			else
-				ret = put_user(dmabuf->fragsize, p);
-			break;
-		}
-		if (file->f_mode & FMODE_READ) {
-			if ((val = prog_dmabuf_record(state)))
-				ret = val;
-			else
-				ret = put_user(dmabuf->fragsize, p);
-			break;
-		}
-		/* neither READ nor WRITE? is this even possible? */
-		ret = -EINVAL;
-		break;
-
-
-	case SNDCTL_DSP_GETFMTS: /* Returns a mask of supported sample format */
-		ret = put_user(AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 |
-			       AFMT_U8, p);
-		break;
-
-	case SNDCTL_DSP_SETFMT:	/* Select sample format */
-		if (get_user(val, p)) {
-			ret = -EFAULT;
-			break;
-		}
-		if ((ret = lock_set_fmt(state)) < 0)
-			return ret;
-
-		if (val != AFMT_QUERY) {
-			if (file->f_mode & FMODE_WRITE) {
-				stop_dac(state);
-				dmabuf->ready = 0;
-				if (val == AFMT_S16_LE)
-					dmabuf->fmt |= TRIDENT_FMT_16BIT;
-				else
-					dmabuf->fmt &= ~TRIDENT_FMT_16BIT;
-			}
-			if (file->f_mode & FMODE_READ) {
-				stop_adc(state);
-				dmabuf->ready = 0;
-				if (val == AFMT_S16_LE)
-					dmabuf->fmt |= TRIDENT_FMT_16BIT;
-				else
-					dmabuf->fmt &= ~TRIDENT_FMT_16BIT;
-			}
-		}
-		unlock_set_fmt(state);
-		ret = put_user((dmabuf->fmt & TRIDENT_FMT_16BIT) ? AFMT_S16_LE :
-			       AFMT_U8, p);
-		break;
-
-	case SNDCTL_DSP_CHANNELS:
-		if (get_user(val, p)) {
-			ret = -EFAULT;
-			break;
-		}
-		if (val != 0) {
-			if ((ret = lock_set_fmt(state)) < 0)
-				return ret;
-
-			if (file->f_mode & FMODE_WRITE) {
-				stop_dac(state);
-				dmabuf->ready = 0;
-
-				//prevent from memory leak
-				if ((state->chans_num > 2) && (state->chans_num != val)) {
-					ali_free_other_states_resources(state);
-					state->chans_num = 1;
-				}
-
-				if (val >= 2) {
-
-					dmabuf->fmt |= TRIDENT_FMT_STEREO;
-					if ((val == 6) && (state->card->pci_id == PCI_DEVICE_ID_ALI_5451)) {
-						if (card->rec_channel_use_count > 0) {
-							printk(KERN_ERR "trident: Record is "
-							       "working on the card!\n");
-							ret = -EBUSY;
-							unlock_set_fmt(state);
-							break;
-						}
-
-						ret = ali_setup_multi_channels(state->card, 6);
-						if (ret < 0) {
-							unlock_set_fmt(state);
-							break;
-						}
-						mutex_lock(&state->card->open_mutex);
-						ret = ali_allocate_other_states_resources(state, 6);
-						if (ret < 0) {
-							mutex_unlock(&state->card->open_mutex);
-							unlock_set_fmt(state);
-							break;
-						}
-						state->card->multi_channel_use_count++;
-						mutex_unlock(&state->card->open_mutex);
-					} else
-						val = 2;	/*yield to 2-channels */
-				} else
-					dmabuf->fmt &= ~TRIDENT_FMT_STEREO;
-				state->chans_num = val;
-			}
-			if (file->f_mode & FMODE_READ) {
-				stop_adc(state);
-				dmabuf->ready = 0;
-				if (val >= 2) {
-					if (!((file->f_mode & FMODE_WRITE) &&
-					      (val == 6)))
-						val = 2;
-					dmabuf->fmt |= TRIDENT_FMT_STEREO;
-				} else
-					dmabuf->fmt &= ~TRIDENT_FMT_STEREO;
-				state->chans_num = val;
-			}
-			unlock_set_fmt(state);
-		}
-		ret = put_user(val, p);
-		break;
-
-	case SNDCTL_DSP_POST:
-		/* Cause the working fragment to be output */
-		break;
-
-	case SNDCTL_DSP_SUBDIVIDE:
-		if (dmabuf->subdivision) {
-			ret = -EINVAL;
-			break;
-		}
-		if (get_user(val, p)) {
-			ret = -EFAULT;
-			break;
-		}
-		if (val != 1 && val != 2 && val != 4) {
-			ret = -EINVAL;
-			break;
-		}
-		dmabuf->subdivision = val;
-		break;
-
-	case SNDCTL_DSP_SETFRAGMENT:
-		if (get_user(val, p)) {
-			ret = -EFAULT;
-			break;
-		}
-
-		dmabuf->ossfragshift = val & 0xffff;
-		dmabuf->ossmaxfrags = (val >> 16) & 0xffff;
-		if (dmabuf->ossfragshift < 4)
-			dmabuf->ossfragshift = 4;
-		if (dmabuf->ossfragshift > 15)
-			dmabuf->ossfragshift = 15;
-		if (dmabuf->ossmaxfrags < 4)
-			dmabuf->ossmaxfrags = 4;
-
-		break;
-
-	case SNDCTL_DSP_GETOSPACE:
-		if (!(file->f_mode & FMODE_WRITE)) {
-			ret = -EINVAL;
-			break;
-		}
-		if (!dmabuf->ready && (val = prog_dmabuf_playback(state)) != 0) {
-			ret = val;
-			break;
-		}
-		spin_lock_irqsave(&state->card->lock, flags);
-		trident_update_ptr(state);
-		abinfo.fragsize = dmabuf->fragsize;
-		abinfo.bytes = dmabuf->dmasize - dmabuf->count;
-		abinfo.fragstotal = dmabuf->numfrag;
-		abinfo.fragments = abinfo.bytes >> dmabuf->fragshift;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-		ret = copy_to_user(argp, &abinfo, sizeof (abinfo)) ?
-			-EFAULT : 0;
-		break;
-
-	case SNDCTL_DSP_GETISPACE:
-		if (!(file->f_mode & FMODE_READ)) {
-			ret = -EINVAL;
-			break;
-		}
-		if (!dmabuf->ready && (val = prog_dmabuf_record(state)) != 0) {
-			ret = val;
-			break;
-		}
-		spin_lock_irqsave(&state->card->lock, flags);
-		trident_update_ptr(state);
-		abinfo.fragsize = dmabuf->fragsize;
-		abinfo.bytes = dmabuf->count;
-		abinfo.fragstotal = dmabuf->numfrag;
-		abinfo.fragments = abinfo.bytes >> dmabuf->fragshift;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-		ret = copy_to_user(argp, &abinfo, sizeof (abinfo)) ?
-			-EFAULT : 0;
-		break;
-
-	case SNDCTL_DSP_NONBLOCK:
-		file->f_flags |= O_NONBLOCK;
-		break;
-
-	case SNDCTL_DSP_GETCAPS:
-		ret = put_user(DSP_CAP_REALTIME | DSP_CAP_TRIGGER |
-			       DSP_CAP_MMAP | DSP_CAP_BIND, p);
-		break;
-
-	case SNDCTL_DSP_GETTRIGGER:
-		val = 0;
-		if ((file->f_mode & FMODE_READ) && dmabuf->enable)
-			val |= PCM_ENABLE_INPUT;
-		if ((file->f_mode & FMODE_WRITE) && dmabuf->enable)
-			val |= PCM_ENABLE_OUTPUT;
-		ret = put_user(val, p);
-		break;
-
-	case SNDCTL_DSP_SETTRIGGER:
-		if (get_user(val, p)) {
-			ret = -EFAULT;
-			break;
-		}
-		if (file->f_mode & FMODE_READ) {
-			if (val & PCM_ENABLE_INPUT) {
-				if (!dmabuf->ready &&
-				    (ret = prog_dmabuf_record(state)))
-					break;
-				start_adc(state);
-			} else
-				stop_adc(state);
-		}
-		if (file->f_mode & FMODE_WRITE) {
-			if (val & PCM_ENABLE_OUTPUT) {
-				if (!dmabuf->ready &&
-				    (ret = prog_dmabuf_playback(state)))
-					break;
-				start_dac(state);
-			} else
-				stop_dac(state);
-		}
-		break;
-
-	case SNDCTL_DSP_GETIPTR:
-		if (!(file->f_mode & FMODE_READ)) {
-			ret = -EINVAL;
-			break;
-		}
-		if (!dmabuf->ready && (val = prog_dmabuf_record(state))
-		    != 0) {
-			ret = val;
-			break;
-		}
-		spin_lock_irqsave(&state->card->lock, flags);
-		trident_update_ptr(state);
-		cinfo.bytes = dmabuf->total_bytes;
-		cinfo.blocks = dmabuf->count >> dmabuf->fragshift;
-		cinfo.ptr = dmabuf->hwptr;
-		if (dmabuf->mapped)
-			dmabuf->count &= dmabuf->fragsize - 1;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-		ret = copy_to_user(argp, &cinfo, sizeof (cinfo)) ?
-			-EFAULT : 0;
-		break;
-
-	case SNDCTL_DSP_GETOPTR:
-		if (!(file->f_mode & FMODE_WRITE)) {
-			ret = -EINVAL;
-			break;
-		}
-		if (!dmabuf->ready && (val = prog_dmabuf_playback(state))
-		    != 0) {
-			ret = val;
-			break;
-		}
-
-		spin_lock_irqsave(&state->card->lock, flags);
-		trident_update_ptr(state);
-		cinfo.bytes = dmabuf->total_bytes;
-		cinfo.blocks = dmabuf->count >> dmabuf->fragshift;
-		cinfo.ptr = dmabuf->hwptr;
-		if (dmabuf->mapped)
-			dmabuf->count &= dmabuf->fragsize - 1;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-		ret = copy_to_user(argp, &cinfo, sizeof (cinfo)) ?
-			-EFAULT : 0;
-		break;
-
-	case SNDCTL_DSP_SETDUPLEX:
-		ret = -EINVAL;
-		break;
-
-	case SNDCTL_DSP_GETODELAY:
-		if (!(file->f_mode & FMODE_WRITE)) {
-			ret = -EINVAL;
-			break;
-		}
-		if (!dmabuf->ready && (val = prog_dmabuf_playback(state)) != 0) {
-			ret = val;
-			break;
-		}
-		spin_lock_irqsave(&state->card->lock, flags);
-		trident_update_ptr(state);
-		val = dmabuf->count;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-		ret = put_user(val, p);
-		break;
-
-	case SOUND_PCM_READ_RATE:
-		ret = put_user(dmabuf->rate, p);
-		break;
-
-	case SOUND_PCM_READ_CHANNELS:
-		ret = put_user((dmabuf->fmt & TRIDENT_FMT_STEREO) ? 2 : 1,
-			       p);
-		break;
-
-	case SOUND_PCM_READ_BITS:
-		ret = put_user((dmabuf->fmt & TRIDENT_FMT_16BIT) ? AFMT_S16_LE :
-			       AFMT_U8, p);
-		break;
-
-	case SNDCTL_DSP_GETCHANNELMASK:
-		ret = put_user(DSP_BIND_FRONT | DSP_BIND_SURR |
-			       DSP_BIND_CENTER_LFE,  p);
-		break;
-
-	case SNDCTL_DSP_BIND_CHANNEL:
-		if (state->card->pci_id != PCI_DEVICE_ID_SI_7018) {
-			ret = -EINVAL;
-			break;
-		}
-
-		if (get_user(val, p)) {
-			ret = -EFAULT;
-			break;
-		}
-		if (val == DSP_BIND_QUERY) {
-			val = dmabuf->channel->attribute | 0x3c00;
-			val = attr2mask[val >> 8];
-		} else {
-			dmabuf->ready = 0;
-			if (file->f_mode & FMODE_READ)
-				dmabuf->channel->attribute = (CHANNEL_REC |
-							      SRC_ENABLE);
-			if (file->f_mode & FMODE_WRITE)
-				dmabuf->channel->attribute = (CHANNEL_SPC_PB |
-							      SRC_ENABLE);
-			dmabuf->channel->attribute |= mask2attr[ffs(val)];
-		}
-		ret = put_user(val, p);
-		break;
-
-	case SNDCTL_DSP_MAPINBUF:
-	case SNDCTL_DSP_MAPOUTBUF:
-	case SNDCTL_DSP_SETSYNCRO:
-	case SOUND_PCM_WRITE_FILTER:
-	case SOUND_PCM_READ_FILTER:
-	default:
-		ret = -EINVAL;
-		break;
-
-	}
-	return ret;
-}
-
-static int
-trident_open(struct inode *inode, struct file *file)
-{
-	int i = 0;
-	int minor = iminor(inode);
-	struct trident_card *card = devs;
-	struct trident_state *state = NULL;
-	struct dmabuf *dmabuf = NULL;
-	unsigned long flags;
-
-	/* Added by Matt Wu 01-05-2001 */
-	/* TODO: there's some redundacy here wrt the check below */
-	/* for multi_use_count > 0. Should we return -EBUSY or find */
-	/* a different card? for now, don't break current behaviour */
-	/* -- mulix */
-	if (file->f_mode & FMODE_READ) {
-		if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-			if (card->multi_channel_use_count > 0)
-				return -EBUSY;
-		}
-	}
-
-	/* find an available virtual channel (instance of /dev/dsp) */
-	while (card != NULL) {
-		mutex_lock(&card->open_mutex);
-		if (file->f_mode & FMODE_READ) {
-			/* Skip opens on cards that are in 6 channel mode */
-			if (card->multi_channel_use_count > 0) {
-				mutex_unlock(&card->open_mutex);
-				card = card->next;
-				continue;
-			}
-		}
-		for (i = 0; i < NR_HW_CH; i++) {
-			if (card->states[i] == NULL) {
-				state = card->states[i] = kzalloc(sizeof(*state), GFP_KERNEL);
-				if (state == NULL) {
-					mutex_unlock(&card->open_mutex);
-					return -ENOMEM;
-				}
-				mutex_init(&state->sem);
-				dmabuf = &state->dmabuf;
-				goto found_virt;
-			}
-		}
-		mutex_unlock(&card->open_mutex);
-		card = card->next;
-	}
-	/* no more virtual channel avaiable */
-	if (!state) {
-		return -ENODEV;
-	}
-      found_virt:
-	/* found a free virtual channel, allocate hardware channels */
-	if (file->f_mode & FMODE_READ)
-		dmabuf->channel = card->alloc_rec_pcm_channel(card);
-	else
-		dmabuf->channel = card->alloc_pcm_channel(card);
-
-	if (dmabuf->channel == NULL) {
-		kfree(card->states[i]);
-		card->states[i] = NULL;
-		return -ENODEV;
-	}
-
-	/* initialize the virtual channel */
-	state->virt = i;
-	state->card = card;
-	state->magic = TRIDENT_STATE_MAGIC;
-	init_waitqueue_head(&dmabuf->wait);
-	file->private_data = state;
-
-	/* set default sample format. According to OSS Programmer's */
-	/* Guide  /dev/dsp should be default to unsigned 8-bits, mono, */
-	/* with sample rate 8kHz and /dev/dspW will accept 16-bits sample */
-	if (file->f_mode & FMODE_WRITE) {
-		dmabuf->fmt &= ~TRIDENT_FMT_MASK;
-		if ((minor & 0x0f) == SND_DEV_DSP16)
-			dmabuf->fmt |= TRIDENT_FMT_16BIT;
-		dmabuf->ossfragshift = 0;
-		dmabuf->ossmaxfrags = 0;
-		dmabuf->subdivision = 0;
-		if (card->pci_id == PCI_DEVICE_ID_SI_7018) {
-			/* set default channel attribute to normal playback */
-			dmabuf->channel->attribute = CHANNEL_PB;
-		}
-		spin_lock_irqsave(&card->lock, flags);
-		trident_set_dac_rate(state, 8000);
-		spin_unlock_irqrestore(&card->lock, flags);
-	}
-
-	if (file->f_mode & FMODE_READ) {
-		/* FIXME: Trident 4d can only record in signed 16-bits stereo, */
-		/* 48kHz sample, to be dealed with in trident_set_adc_rate() ?? */
-		dmabuf->fmt &= ~TRIDENT_FMT_MASK;
-		if ((minor & 0x0f) == SND_DEV_DSP16)
-			dmabuf->fmt |= TRIDENT_FMT_16BIT;
-		dmabuf->ossfragshift = 0;
-		dmabuf->ossmaxfrags = 0;
-		dmabuf->subdivision = 0;
-		if (card->pci_id == PCI_DEVICE_ID_SI_7018) {
-			/* set default channel attribute to 0x8a80, record from
-			   PCM L/R FIFO and mono = (left + right + 1)/2 */
-			dmabuf->channel->attribute = (CHANNEL_REC | PCM_LR |
-						      MONO_MIX);
-		}
-		spin_lock_irqsave(&card->lock, flags);
-		trident_set_adc_rate(state, 8000);
-		spin_unlock_irqrestore(&card->lock, flags);
-
-		/* Added by Matt Wu 01-05-2001 */
-		if (card->pci_id == PCI_DEVICE_ID_ALI_5451)
-			card->rec_channel_use_count++;
-	}
-
-	state->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
-	mutex_unlock(&card->open_mutex);
-
-	pr_debug("trident: open virtual channel %d, hard channel %d\n",
-		 state->virt, dmabuf->channel->num);
-
-	return nonseekable_open(inode, file);
-}
-
-static int
-trident_release(struct inode *inode, struct file *file)
-{
-	struct trident_state *state = (struct trident_state *)file->private_data;
-	struct trident_card *card;
-	struct dmabuf *dmabuf;
-
-	VALIDATE_STATE(state);
-
-	card = state->card;
-	dmabuf = &state->dmabuf;
-
-	if (file->f_mode & FMODE_WRITE) {
-		trident_clear_tail(state);
-		drain_dac(state, file->f_flags & O_NONBLOCK);
-	}
-
-	pr_debug("trident: closing virtual channel %d, hard channel %d\n",
-		 state->virt, dmabuf->channel->num);
-
-	/* stop DMA state machine and free DMA buffers/channels */
-	mutex_lock(&card->open_mutex);
-
-	if (file->f_mode & FMODE_WRITE) {
-		stop_dac(state);
-		dealloc_dmabuf(&state->dmabuf, state->card->pci_dev);
-		state->card->free_pcm_channel(state->card, dmabuf->channel->num);
-
-		/* Added by Matt Wu */
-		if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-			if (state->chans_num > 2) {
-				if (card->multi_channel_use_count-- < 0)
-					card->multi_channel_use_count = 0;
-				if (card->multi_channel_use_count == 0)
-					ali_close_multi_channels();
-				ali_free_other_states_resources(state);
-			}
-		}
-	}
-	if (file->f_mode & FMODE_READ) {
-		stop_adc(state);
-		dealloc_dmabuf(&state->dmabuf, state->card->pci_dev);
-		state->card->free_pcm_channel(state->card, dmabuf->channel->num);
-
-		/* Added by Matt Wu */
-		if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-			if (card->rec_channel_use_count-- < 0)
-				card->rec_channel_use_count = 0;
-		}
-	}
-
-	card->states[state->virt] = NULL;
-	kfree(state);
-
-	/* we're covered by the open_mutex */
-	mutex_unlock(&card->open_mutex);
-
-	return 0;
-}
-
-static const struct file_operations trident_audio_fops = {
-	.owner = THIS_MODULE,
-	.llseek = no_llseek,
-	.read = trident_read,
-	.write = trident_write,
-	.poll = trident_poll,
-	.ioctl = trident_ioctl,
-	.mmap = trident_mmap,
-	.open = trident_open,
-	.release = trident_release,
-};
-
-/* trident specific AC97 functions */
-/* Write AC97 codec registers */
-static void
-trident_ac97_set(struct ac97_codec *codec, u8 reg, u16 val)
-{
-	struct trident_card *card = (struct trident_card *)codec->private_data;
-	unsigned int address, mask, busy;
-	unsigned short count = 0xffff;
-	unsigned long flags;
-	u32 data;
-
-	data = ((u32) val) << 16;
-
-	switch (card->pci_id) {
-	default:
-	case PCI_DEVICE_ID_SI_7018:
-		address = SI_AC97_WRITE;
-		mask = SI_AC97_BUSY_WRITE | SI_AC97_AUDIO_BUSY;
-		if (codec->id)
-			mask |= SI_AC97_SECONDARY;
-		busy = SI_AC97_BUSY_WRITE;
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_DX:
-		address = DX_ACR0_AC97_W;
-		mask = busy = DX_AC97_BUSY_WRITE;
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_NX:
-		address = NX_ACR1_AC97_W;
-		mask = NX_AC97_BUSY_WRITE;
-		if (codec->id)
-			mask |= NX_AC97_WRITE_SECONDARY;
-		busy = NX_AC97_BUSY_WRITE;
-		break;
-	case PCI_DEVICE_ID_INTERG_5050:
-		address = SI_AC97_WRITE;
-		mask = busy = SI_AC97_BUSY_WRITE;
-		if (codec->id)
-			mask |= SI_AC97_SECONDARY;
-		break;
-	}
-
-	spin_lock_irqsave(&card->lock, flags);
-	do {
-		if ((inw(TRID_REG(card, address)) & busy) == 0)
-			break;
-	} while (--count);
-
-	data |= (mask | (reg & AC97_REG_ADDR));
-
-	if (count == 0) {
-		printk(KERN_ERR "trident: AC97 CODEC write timed out.\n");
-		spin_unlock_irqrestore(&card->lock, flags);
-		return;
-	}
-
-	outl(data, TRID_REG(card, address));
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-/* Read AC97 codec registers */
-static u16
-trident_ac97_get(struct ac97_codec *codec, u8 reg)
-{
-	struct trident_card *card = (struct trident_card *)codec->private_data;
-	unsigned int address, mask, busy;
-	unsigned short count = 0xffff;
-	unsigned long flags;
-	u32 data;
-
-	switch (card->pci_id) {
-	default:
-	case PCI_DEVICE_ID_SI_7018:
-		address = SI_AC97_READ;
-		mask = SI_AC97_BUSY_READ | SI_AC97_AUDIO_BUSY;
-		if (codec->id)
-			mask |= SI_AC97_SECONDARY;
-		busy = SI_AC97_BUSY_READ;
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_DX:
-		address = DX_ACR1_AC97_R;
-		mask = busy = DX_AC97_BUSY_READ;
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_NX:
-		if (codec->id)
-			address = NX_ACR3_AC97_R_SECONDARY;
-		else
-			address = NX_ACR2_AC97_R_PRIMARY;
-		mask = NX_AC97_BUSY_READ;
-		busy = NX_AC97_BUSY_READ | NX_AC97_BUSY_DATA;
-		break;
-	case PCI_DEVICE_ID_INTERG_5050:
-		address = SI_AC97_READ;
-		mask = busy = SI_AC97_BUSY_READ;
-		if (codec->id)
-			mask |= SI_AC97_SECONDARY;
-		break;
-	}
-
-	data = (mask | (reg & AC97_REG_ADDR));
-
-	spin_lock_irqsave(&card->lock, flags);
-	outl(data, TRID_REG(card, address));
-	do {
-		data = inl(TRID_REG(card, address));
-		if ((data & busy) == 0)
-			break;
-	} while (--count);
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	if (count == 0) {
-		printk(KERN_ERR "trident: AC97 CODEC read timed out.\n");
-		data = 0;
-	}
-	return ((u16) (data >> 16));
-}
-
-/* rewrite ac97 read and write mixer register by hulei for ALI*/
-static int
-acquirecodecaccess(struct trident_card *card)
-{
-	u16 wsemamask = 0x6000;	/* bit 14..13 */
-	u16 wsemabits;
-	u16 wcontrol;
-	int block = 0;
-	int ncount = 25;
-	while (1) {
-		wcontrol = inw(TRID_REG(card, ALI_AC97_WRITE));
-		wsemabits = wcontrol & wsemamask;
-
-		if (wsemabits == 0x4000)
-			return 1;	/* 0x4000 is audio ,then success */
-		if (ncount-- < 0)
-			break;
-		if (wsemabits == 0) {
-		      unlock:
-			outl(((u32) (wcontrol & 0x1eff) | 0x00004000),
-			     TRID_REG(card, ALI_AC97_WRITE));
-			continue;
-		}
-		udelay(20);
-	}
-	if (!block) {
-		pr_debug("accesscodecsemaphore: try unlock\n");
-		block = 1;
-		goto unlock;
-	}
-	return 0;
-}
-
-static void
-releasecodecaccess(struct trident_card *card)
-{
-	unsigned long wcontrol;
-	wcontrol = inl(TRID_REG(card, ALI_AC97_WRITE));
-	outl((wcontrol & 0xffff1eff), TRID_REG(card, ALI_AC97_WRITE));
-}
-
-static int
-waitforstimertick(struct trident_card *card)
-{
-	unsigned long chk1, chk2;
-	unsigned int wcount = 0xffff;
-	chk1 = inl(TRID_REG(card, ALI_STIMER));
-
-	while (1) {
-		chk2 = inl(TRID_REG(card, ALI_STIMER));
-		if ((wcount > 0) && chk1 != chk2)
-			return 1;
-		if (wcount <= 0)
-			break;
-		udelay(50);
-	}
-	return 0;
-}
-
-/* Read AC97 codec registers for ALi*/
-static u16
-ali_ac97_get(struct trident_card *card, int secondary, u8 reg)
-{
-	unsigned int address, mask;
-	unsigned int ncount;
-	unsigned long aud_reg;
-	u32 data;
-	u16 wcontrol;
-	unsigned long flags;
-
-	BUG_ON(!card);
-
-	address = ALI_AC97_READ;
-	if (card->revision == ALI_5451_V02) {
-		address = ALI_AC97_WRITE;
-	}
-	mask = ALI_AC97_READ_ACTION | ALI_AC97_AUDIO_BUSY;
-	if (secondary)
-		mask |= ALI_AC97_SECONDARY;
-
-	spin_lock_irqsave(&card->lock, flags);
-
-	if (!acquirecodecaccess(card))
-		printk(KERN_ERR "access codec fail\n");
-
-	wcontrol = inw(TRID_REG(card, ALI_AC97_WRITE));
-	wcontrol &= 0xfe00;
-	wcontrol |= (0x8000 | reg);
-	outw(wcontrol, TRID_REG(card, ALI_AC97_WRITE));
-
-	data = (mask | (reg & AC97_REG_ADDR));
-
-	if (!waitforstimertick(card)) {
-		printk(KERN_ERR "ali_ac97_read: BIT_CLOCK is dead\n");
-		goto releasecodec;
-	}
-
-	udelay(20);
-
-	ncount = 10;
-
-	while (1) {
-		if ((inw(TRID_REG(card, ALI_AC97_WRITE)) & ALI_AC97_BUSY_READ)
-		    != 0)
-			break;
-		if (ncount <= 0)
-			break;
-		if (ncount-- == 1) {
-			pr_debug("ali_ac97_read :try clear busy flag\n");
-			aud_reg = inl(TRID_REG(card, ALI_AC97_WRITE));
-			outl((aud_reg & 0xffff7fff),
-			     TRID_REG(card, ALI_AC97_WRITE));
-		}
-		udelay(10);
-	}
-
-	data = inl(TRID_REG(card, address));
-
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	return ((u16) (data >> 16));
-
-      releasecodec:
-	releasecodecaccess(card);
-	spin_unlock_irqrestore(&card->lock, flags);
-	printk(KERN_ERR "ali_ac97_read: AC97 CODEC read timed out.\n");
-	return 0;
-}
-
-/* Write AC97 codec registers for hulei*/
-static void
-ali_ac97_set(struct trident_card *card, int secondary, u8 reg, u16 val)
-{
-	unsigned int address, mask;
-	unsigned int ncount;
-	u32 data;
-	u16 wcontrol;
-	unsigned long flags;
-
-	data = ((u32) val) << 16;
-
-	BUG_ON(!card);
-
-	address = ALI_AC97_WRITE;
-	mask = ALI_AC97_WRITE_ACTION | ALI_AC97_AUDIO_BUSY;
-	if (secondary)
-		mask |= ALI_AC97_SECONDARY;
-	if (card->revision == ALI_5451_V02)
-		mask |= ALI_AC97_WRITE_MIXER_REGISTER;
-
-	spin_lock_irqsave(&card->lock, flags);
-	if (!acquirecodecaccess(card))
-		printk(KERN_ERR "ali_ac97_write: access codec fail\n");
-
-	wcontrol = inw(TRID_REG(card, ALI_AC97_WRITE));
-	wcontrol &= 0xff00;
-	wcontrol |= (0x8100 | reg); /* bit 8=1: (ali1535 )reserved/ */
-	                            /* ali1535+ write */
-	outl((data | wcontrol), TRID_REG(card, ALI_AC97_WRITE));
-
-	if (!waitforstimertick(card)) {
-		printk(KERN_ERR "BIT_CLOCK is dead\n");
-		goto releasecodec;
-	}
-
-	ncount = 10;
-	while (1) {
-		wcontrol = inw(TRID_REG(card, ALI_AC97_WRITE));
-		if (!(wcontrol & 0x8000))
-			break;
-		if (ncount <= 0)
-			break;
-		if (ncount-- == 1) {
-			pr_debug("ali_ac97_set :try clear busy flag!!\n");
-			outw(wcontrol & 0x7fff,
-			     TRID_REG(card, ALI_AC97_WRITE));
-		}
-		udelay(10);
-	}
-
-      releasecodec:
-	releasecodecaccess(card);
-	spin_unlock_irqrestore(&card->lock, flags);
-	return;
-}
-
-static void
-ali_enable_special_channel(struct trident_state *stat)
-{
-	struct trident_card *card = stat->card;
-	unsigned long s_channels;
-
-	s_channels = inl(TRID_REG(card, ALI_GLOBAL_CONTROL));
-	s_channels |= (1 << stat->dmabuf.channel->num);
-	outl(s_channels, TRID_REG(card, ALI_GLOBAL_CONTROL));
-}
-
-static u16
-ali_ac97_read(struct ac97_codec *codec, u8 reg)
-{
-	int id;
-	u16 data;
-	struct trident_card *card = NULL;
-
-	/* Added by Matt Wu */
-	BUG_ON(!codec);
-
-	card = (struct trident_card *) codec->private_data;
-
-	if (!card->mixer_regs_ready)
-		return ali_ac97_get(card, codec->id, reg);
-
-	/*
-	 *      FIXME: need to stop this caching some registers
-	 */
-	if (codec->id)
-		id = 1;
-	else
-		id = 0;
-
-	data = card->mixer_regs[reg / 2][id];
-	return data;
-}
-
-static void
-ali_ac97_write(struct ac97_codec *codec, u8 reg, u16 val)
-{
-	int id;
-	struct trident_card *card;
-
-	/*  Added by Matt Wu */
-	BUG_ON(!codec);
-
-	card = (struct trident_card *) codec->private_data;
-
-	if (!card->mixer_regs_ready) {
-		ali_ac97_set(card, codec->id, reg, val);
-		return;
-	}
-
-	if (codec->id)
-		id = 1;
-	else
-		id = 0;
-
-	card->mixer_regs[reg / 2][id] = val;
-	ali_ac97_set(card, codec->id, reg, val);
-}
-
-/*
-flag:	ALI_SPDIF_OUT_TO_SPDIF_OUT
-	ALI_PCM_TO_SPDIF_OUT
-*/
-
-static void
-ali_setup_spdif_out(struct trident_card *card, int flag)
-{
-	unsigned long spdif;
-	unsigned char ch;
-
-	char temp;
-	struct pci_dev *pci_dev = NULL;
-
-	pci_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
-				 pci_dev);
-	if (pci_dev == NULL)
-		return;
-	pci_read_config_byte(pci_dev, 0x61, &temp);
-	temp |= 0x40;
-	pci_write_config_byte(pci_dev, 0x61, temp);
-	pci_read_config_byte(pci_dev, 0x7d, &temp);
-	temp |= 0x01;
-	pci_write_config_byte(pci_dev, 0x7d, temp);
-	pci_read_config_byte(pci_dev, 0x7e, &temp);
-	temp &= (~0x20);
-	temp |= 0x10;
-	pci_write_config_byte(pci_dev, 0x7e, temp);
-
-	pci_dev_put(pci_dev);
-
-	ch = inb(TRID_REG(card, ALI_SCTRL));
-	outb(ch | ALI_SPDIF_OUT_ENABLE, TRID_REG(card, ALI_SCTRL));
-	ch = inb(TRID_REG(card, ALI_SPDIF_CTRL));
-	outb(ch & ALI_SPDIF_OUT_CH_STATUS, TRID_REG(card, ALI_SPDIF_CTRL));
-
-	if (flag & ALI_SPDIF_OUT_TO_SPDIF_OUT) {
-		spdif = inw(TRID_REG(card, ALI_GLOBAL_CONTROL));
-		spdif |= ALI_SPDIF_OUT_CH_ENABLE;
-		spdif &= ALI_SPDIF_OUT_SEL_SPDIF;
-		outw(spdif, TRID_REG(card, ALI_GLOBAL_CONTROL));
-		spdif = inw(TRID_REG(card, ALI_SPDIF_CS));
-		if (flag & ALI_SPDIF_OUT_NON_PCM)
-			spdif |= 0x0002;
-		else
-			spdif &= (~0x0002);
-		outw(spdif, TRID_REG(card, ALI_SPDIF_CS));
-	} else {
-		spdif = inw(TRID_REG(card, ALI_GLOBAL_CONTROL));
-		spdif |= ALI_SPDIF_OUT_SEL_PCM;
-		outw(spdif, TRID_REG(card, ALI_GLOBAL_CONTROL));
-	}
-}
-
-static void
-ali_disable_special_channel(struct trident_card *card, int ch)
-{
-	unsigned long sc;
-
-	sc = inl(TRID_REG(card, ALI_GLOBAL_CONTROL));
-	sc &= ~(1 << ch);
-	outl(sc, TRID_REG(card, ALI_GLOBAL_CONTROL));
-}
-
-static void
-ali_disable_spdif_in(struct trident_card *card)
-{
-	unsigned long spdif;
-
-	spdif = inl(TRID_REG(card, ALI_GLOBAL_CONTROL));
-	spdif &= (~ALI_SPDIF_IN_SUPPORT);
-	outl(spdif, TRID_REG(card, ALI_GLOBAL_CONTROL));
-
-	ali_disable_special_channel(card, ALI_SPDIF_IN_CHANNEL);
-}
-
-static void
-ali_setup_spdif_in(struct trident_card *card)
-{
-	unsigned long spdif;
-
-	//Set SPDIF IN Supported
-	spdif = inl(TRID_REG(card, ALI_GLOBAL_CONTROL));
-	spdif |= ALI_SPDIF_IN_SUPPORT;
-	outl(spdif, TRID_REG(card, ALI_GLOBAL_CONTROL));
-
-	//Set SPDIF IN Rec
-	spdif = inl(TRID_REG(card, ALI_GLOBAL_CONTROL));
-	spdif |= ALI_SPDIF_IN_CH_ENABLE;
-	outl(spdif, TRID_REG(card, ALI_GLOBAL_CONTROL));
-
-	spdif = inb(TRID_REG(card, ALI_SPDIF_CTRL));
-	spdif |= ALI_SPDIF_IN_CH_STATUS;
-	outb(spdif, TRID_REG(card, ALI_SPDIF_CTRL));
-/*
-	spdif = inb(TRID_REG(card, ALI_SPDIF_CTRL));
-	spdif |= ALI_SPDIF_IN_FUNC_ENABLE;
-	outb(spdif, TRID_REG(card, ALI_SPDIF_CTRL));
-*/
-}
-
-static void
-ali_delay(struct trident_card *card, int interval)
-{
-	unsigned long begintimer, currenttimer;
-
-	begintimer = inl(TRID_REG(card, ALI_STIMER));
-	currenttimer = inl(TRID_REG(card, ALI_STIMER));
-
-	while (currenttimer < begintimer + interval)
-		currenttimer = inl(TRID_REG(card, ALI_STIMER));
-}
-
-static void
-ali_detect_spdif_rate(struct trident_card *card)
-{
-	u16 wval = 0;
-	u16 count = 0;
-	u8 bval = 0, R1 = 0, R2 = 0;
-
-	bval = inb(TRID_REG(card, ALI_SPDIF_CTRL));
-	bval |= 0x02;
-	outb(bval, TRID_REG(card, ALI_SPDIF_CTRL));
-
-	bval = inb(TRID_REG(card, ALI_SPDIF_CTRL + 1));
-	bval |= 0x1F;
-	outb(bval, TRID_REG(card, ALI_SPDIF_CTRL + 1));
-
-	while (((R1 < 0x0B) || (R1 > 0x0E)) && (R1 != 0x12) &&
-	       count <= 50000) {
-		count++;
-
-		ali_delay(card, 6);
-
-		bval = inb(TRID_REG(card, ALI_SPDIF_CTRL + 1));
-		R1 = bval & 0x1F;
-	}
-
-	if (count > 50000) {
-		printk(KERN_WARNING "trident: Error in "
-		       "ali_detect_spdif_rate!\n");
-		return;
-	}
-
-	count = 0;
-
-	while (count <= 50000) {
-		count++;
-
-		ali_delay(card, 6);
-
-		bval = inb(TRID_REG(card, ALI_SPDIF_CTRL + 1));
-		R2 = bval & 0x1F;
-
-		if (R2 != R1)
-			R1 = R2;
-		else
-			break;
-	}
-
-	if (count > 50000) {
-		printk(KERN_WARNING "trident: Error in "
-		       "ali_detect_spdif_rate!\n");
-		return;
-	}
-
-	switch (R2) {
-	case 0x0b:
-	case 0x0c:
-	case 0x0d:
-	case 0x0e:
-		wval = inw(TRID_REG(card, ALI_SPDIF_CTRL + 2));
-		wval &= 0xE0F0;
-		wval |= (u16) 0x09 << 8 | (u16) 0x05;
-		outw(wval, TRID_REG(card, ALI_SPDIF_CTRL + 2));
-
-		bval = inb(TRID_REG(card, ALI_SPDIF_CS + 3)) & 0xF0;
-		outb(bval | 0x02, TRID_REG(card, ALI_SPDIF_CS + 3));
-		break;
-
-	case 0x12:
-		wval = inw(TRID_REG(card, ALI_SPDIF_CTRL + 2));
-		wval &= 0xE0F0;
-		wval |= (u16) 0x0E << 8 | (u16) 0x08;
-		outw(wval, TRID_REG(card, ALI_SPDIF_CTRL + 2));
-
-		bval = inb(TRID_REG(card, ALI_SPDIF_CS + 3)) & 0xF0;
-		outb(bval | 0x03, TRID_REG(card, ALI_SPDIF_CS + 3));
-		break;
-
-	default:
-		break;
-	}
-
-}
-
-static unsigned int
-ali_get_spdif_in_rate(struct trident_card *card)
-{
-	u32 dwRate = 0;
-	u8 bval = 0;
-
-	ali_detect_spdif_rate(card);
-
-	bval = inb(TRID_REG(card, ALI_SPDIF_CTRL));
-	bval &= 0x7F;
-	bval |= 0x40;
-	outb(bval, TRID_REG(card, ALI_SPDIF_CTRL));
-
-	bval = inb(TRID_REG(card, ALI_SPDIF_CS + 3));
-	bval &= 0x0F;
-
-	switch (bval) {
-	case 0:
-		dwRate = 44100;
-		break;
-	case 1:
-		dwRate = 48000;
-		break;
-	case 2:
-		dwRate = 32000;
-		break;
-	default:
-		// Error occurs
-		break;
-	}
-
-	return dwRate;
-
-}
-
-static int
-ali_close_multi_channels(void)
-{
-	char temp = 0;
-	struct pci_dev *pci_dev = NULL;
-
-	pci_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
-				 pci_dev);
-	if (pci_dev == NULL)
-		return -1;
-
-	pci_read_config_byte(pci_dev, 0x59, &temp);
-	temp &= ~0x80;
-	pci_write_config_byte(pci_dev, 0x59, temp);
-
-	pci_dev_put(pci_dev);
-
-	pci_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
-				 NULL);
-	if (pci_dev == NULL)
-		return -1;
-
-	pci_read_config_byte(pci_dev, 0xB8, &temp);
-	temp &= ~0x20;
-	pci_write_config_byte(pci_dev, 0xB8, temp);
-
-	pci_dev_put(pci_dev);
-
-	return 0;
-}
-
-static int
-ali_setup_multi_channels(struct trident_card *card, int chan_nums)
-{
-	unsigned long dwValue;
-	char temp = 0;
-	struct pci_dev *pci_dev = NULL;
-
-	pci_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
-				 pci_dev);
-	if (pci_dev == NULL)
-		return -1;
-	pci_read_config_byte(pci_dev, 0x59, &temp);
-	temp |= 0x80;
-	pci_write_config_byte(pci_dev, 0x59, temp);
-
-	pci_dev_put(pci_dev);
-
-	pci_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
-				 NULL);
-	if (pci_dev == NULL)
-		return -1;
-	pci_read_config_byte(pci_dev, (int) 0xB8, &temp);
-	temp |= 0x20;
-	pci_write_config_byte(pci_dev, (int) 0xB8, (u8) temp);
-
-	pci_dev_put(pci_dev);
-
-	if (chan_nums == 6) {
-		dwValue = inl(TRID_REG(card, ALI_SCTRL)) | 0x000f0000;
-		outl(dwValue, TRID_REG(card, ALI_SCTRL));
-		mdelay(4);
-		dwValue = inl(TRID_REG(card, ALI_SCTRL));
-		if (dwValue & 0x2000000) {
-			ali_ac97_write(card->ac97_codec[0], 0x02, 8080);
-			ali_ac97_write(card->ac97_codec[0], 0x36, 0);
-			ali_ac97_write(card->ac97_codec[0], 0x38, 0);
-			/*
-			 *      On a board with a single codec you won't get the
-			 *      surround. On other boards configure it.
-			 */
-			if (card->ac97_codec[1] != NULL) {
-				ali_ac97_write(card->ac97_codec[1], 0x36, 0);
-				ali_ac97_write(card->ac97_codec[1], 0x38, 0);
-				ali_ac97_write(card->ac97_codec[1], 0x02, 0x0606);
-				ali_ac97_write(card->ac97_codec[1], 0x18, 0x0303);
-				ali_ac97_write(card->ac97_codec[1], 0x74, 0x3);
-			}
-			return 1;
-		}
-	}
-	return -EINVAL;
-}
-
-static void
-ali_free_pcm_channel(struct trident_card *card, unsigned int channel)
-{
-	int bank;
-
-	if (channel > 31)
-		return;
-
-	bank = channel >> 5;
-	channel = channel & 0x1f;
-
-	card->banks[bank].bitmap &= ~(1 << (channel));
-}
-
-static int
-ali_allocate_other_states_resources(struct trident_state *state, int chan_nums)
-{
-	struct trident_card *card = state->card;
-	struct trident_state *s;
-	int i, state_count = 0;
-	struct trident_pcm_bank *bank;
-	struct trident_channel *channel;
-	unsigned long num;
-
-	bank = &card->banks[BANK_A];
-
-	if (chan_nums != 6)
-		return 0;
-
-	for (i = 0; (i < ALI_CHANNELS) && (state_count != 4); i++) {
-		if (card->states[i])
-			continue;
-
-		num = ali_multi_channels_5_1[state_count];
-		if (!(bank->bitmap & (1 << num))) {
-			bank->bitmap |= 1 << num;
-			channel = &bank->channels[num];
-			channel->num = num;
-		} else {
-			state_count--;
-			for (; state_count >= 0; state_count--) {
-				kfree(state->other_states[state_count]);
-				num = ali_multi_channels_5_1[state_count];
-					ali_free_pcm_channel(card, num);
-			}
-			return -EBUSY;
-		}
-		s = card->states[i] = kzalloc(sizeof(*state), GFP_KERNEL);
-		if (!s) {
-			num = ali_multi_channels_5_1[state_count];
-			ali_free_pcm_channel(card, num);
-			state_count--;
-			for (; state_count >= 0; state_count--) {
-				num = ali_multi_channels_5_1[state_count];
-				ali_free_pcm_channel(card, num);
-				kfree(state->other_states[state_count]);
-			}
-			return -ENOMEM;
-		}
-
-		s->dmabuf.channel = channel;
-		s->dmabuf.ossfragshift = s->dmabuf.ossmaxfrags =
-			s->dmabuf.subdivision = 0;
-		init_waitqueue_head(&s->dmabuf.wait);
-		s->magic = card->magic;
-		s->card = card;
-		s->virt = i;
-		ali_enable_special_channel(s);
-		state->other_states[state_count++] = s;
-	}
-
-	if (state_count != 4) {
-		state_count--;
-		for (; state_count >= 0; state_count--) {
-			kfree(state->other_states[state_count]);
-			num = ali_multi_channels_5_1[state_count];
-			ali_free_pcm_channel(card, num);
-		}
-		return -EBUSY;
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PM
-/* save registers for ALi Power Management */
-static struct ali_saved_registers {
-	unsigned long global_regs[ALI_GLOBAL_REGS];
-	unsigned long channel_regs[ALI_CHANNELS][ALI_CHANNEL_REGS];
-	unsigned mixer_regs[ALI_MIXER_REGS];
-} ali_registers;
-
-static void
-ali_save_regs(struct trident_card *card)
-{
-	unsigned long flags;
-	int i, j;
-
-	spin_lock_irqsave(&card->lock, flags);
-
-	ali_registers.global_regs[0x2c] = inl(TRID_REG(card, T4D_MISCINT));
-	//ali_registers.global_regs[0x20] = inl(TRID_REG(card,T4D_START_A));
-	ali_registers.global_regs[0x21] = inl(TRID_REG(card, T4D_STOP_A));
-
-	//disable all IRQ bits
-	outl(ALI_DISABLE_ALL_IRQ, TRID_REG(card, T4D_MISCINT));
-
-	for (i = 1; i < ALI_MIXER_REGS; i++)
-		ali_registers.mixer_regs[i] = ali_ac97_read(card->ac97_codec[0],
-							    i * 2);
-
-	for (i = 0; i < ALI_GLOBAL_REGS; i++) {
-		if ((i * 4 == T4D_MISCINT) || (i * 4 == T4D_STOP_A))
-			continue;
-		ali_registers.global_regs[i] = inl(TRID_REG(card, i * 4));
-	}
-
-	for (i = 0; i < ALI_CHANNELS; i++) {
-		outb(i, TRID_REG(card, T4D_LFO_GC_CIR));
-		for (j = 0; j < ALI_CHANNEL_REGS; j++)
-			ali_registers.channel_regs[i][j] = inl(TRID_REG(card,
-									j * 4 + 0xe0));
-	}
-
-	//Stop all HW channel
-	outl(ALI_STOP_ALL_CHANNELS, TRID_REG(card, T4D_STOP_A));
-
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-static void
-ali_restore_regs(struct trident_card *card)
-{
-	unsigned long flags;
-	int i, j;
-
-	spin_lock_irqsave(&card->lock, flags);
-
-	for (i = 1; i < ALI_MIXER_REGS; i++)
-		ali_ac97_write(card->ac97_codec[0], i * 2,
-			       ali_registers.mixer_regs[i]);
-
-	for (i = 0; i < ALI_CHANNELS; i++) {
-		outb(i, TRID_REG(card, T4D_LFO_GC_CIR));
-		for (j = 0; j < ALI_CHANNEL_REGS; j++)
-			outl(ali_registers.channel_regs[i][j],
-			     TRID_REG(card, j * 4 + 0xe0));
-	}
-
-	for (i = 0; i < ALI_GLOBAL_REGS; i++) {
-		if ((i * 4 == T4D_MISCINT) || (i * 4 == T4D_STOP_A) ||
-		    (i * 4 == T4D_START_A))
-			continue;
-		outl(ali_registers.global_regs[i], TRID_REG(card, i * 4));
-	}
-
-	//start HW channel
-	outl(ali_registers.global_regs[0x20], TRID_REG(card, T4D_START_A));
-	//restore IRQ enable bits
-	outl(ali_registers.global_regs[0x2c], TRID_REG(card, T4D_MISCINT));
-
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-static int
-trident_suspend(struct pci_dev *dev, pm_message_t unused)
-{
-	struct trident_card *card = pci_get_drvdata(dev);
-
-	if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-		ali_save_regs(card);
-	}
-	return 0;
-}
-
-static int
-trident_resume(struct pci_dev *dev)
-{
-	struct trident_card *card = pci_get_drvdata(dev);
-
-	if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-		ali_restore_regs(card);
-	}
-	return 0;
-}
-#endif
-
-static struct trident_channel *
-ali_alloc_pcm_channel(struct trident_card *card)
-{
-	struct trident_pcm_bank *bank;
-	int idx;
-
-	bank = &card->banks[BANK_A];
-
-	if (inl(TRID_REG(card, ALI_GLOBAL_CONTROL)) &
-	    (ALI_SPDIF_OUT_CH_ENABLE)) {
-		idx = ALI_SPDIF_OUT_CHANNEL;
-		if (!(bank->bitmap & (1 << idx))) {
-			struct trident_channel *channel = &bank->channels[idx];
-			bank->bitmap |= 1 << idx;
-			channel->num = idx;
-			return channel;
-		}
-	}
-
-	for (idx = ALI_PCM_OUT_CHANNEL_FIRST; idx <= ALI_PCM_OUT_CHANNEL_LAST;
-	     idx++) {
-		if (!(bank->bitmap & (1 << idx))) {
-			struct trident_channel *channel = &bank->channels[idx];
-			bank->bitmap |= 1 << idx;
-			channel->num = idx;
-			return channel;
-		}
-	}
-
-	/* no more free channels avaliable */
-#if 0
-	printk(KERN_ERR "ali: no more channels available on Bank A.\n");
-#endif /* 0 */
-	return NULL;
-}
-
-static struct trident_channel *
-ali_alloc_rec_pcm_channel(struct trident_card *card)
-{
-	struct trident_pcm_bank *bank;
-	int idx;
-
-	if (inl(TRID_REG(card, ALI_GLOBAL_CONTROL)) & ALI_SPDIF_IN_SUPPORT)
-		idx = ALI_SPDIF_IN_CHANNEL;
-	else
-		idx = ALI_PCM_IN_CHANNEL;
-
-	bank = &card->banks[BANK_A];
-
-	if (!(bank->bitmap & (1 << idx))) {
-		struct trident_channel *channel = &bank->channels[idx];
-		bank->bitmap |= 1 << idx;
-		channel->num = idx;
-		return channel;
-	}
-
-	/* no free recordable channels avaliable */
-#if 0
-	printk(KERN_ERR "ali: no recordable channels available on Bank A.\n");
-#endif /* 0 */
-	return NULL;
-}
-
-static void
-ali_set_spdif_out_rate(struct trident_card *card, unsigned int rate)
-{
-	unsigned char ch_st_sel;
-	unsigned short status_rate;
-
-	switch (rate) {
-	case 44100:
-		status_rate = 0;
-		break;
-	case 32000:
-		status_rate = 0x300;
-		break;
-	case 48000:
-	default:
-		status_rate = 0x200;
-		break;
-	}
-
-	/* select spdif_out */
-	ch_st_sel = inb(TRID_REG(card, ALI_SPDIF_CTRL)) & ALI_SPDIF_OUT_CH_STATUS;
-
-	ch_st_sel |= 0x80;	/* select right */
-	outb(ch_st_sel, TRID_REG(card, ALI_SPDIF_CTRL));
-	outb(status_rate | 0x20, TRID_REG(card, ALI_SPDIF_CS + 2));
-
-	ch_st_sel &= (~0x80);	/* select left */
-	outb(ch_st_sel, TRID_REG(card, ALI_SPDIF_CTRL));
-	outw(status_rate | 0x10, TRID_REG(card, ALI_SPDIF_CS + 2));
-}
-
-static void
-ali_address_interrupt(struct trident_card *card)
-{
-	int i, channel;
-	struct trident_state *state;
-	u32 mask, channel_mask;
-
-	mask = trident_get_interrupt_mask(card, 0);
-	for (i = 0; i < NR_HW_CH; i++) {
-		if ((state = card->states[i]) == NULL)
-			continue;
-		channel = state->dmabuf.channel->num;
-		if ((channel_mask = 1 << channel) & mask) {
-			mask &= ~channel_mask;
-			trident_ack_channel_interrupt(card, channel);
-			udelay(100);
-			state->dmabuf.update_flag |= ALI_ADDRESS_INT_UPDATE;
-			trident_update_ptr(state);
-		}
-	}
-	if (mask) {
-		for (i = 0; i < NR_HW_CH; i++) {
-			if (mask & (1 << i)) {
-				printk("ali: spurious channel irq %d.\n", i);
-				trident_ack_channel_interrupt(card, i);
-				trident_stop_voice(card, i);
-				trident_disable_voice_irq(card, i);
-			}
-		}
-	}
-}
-
-/* Updating the values of counters of other_states' DMAs without lock
-protection is no harm because all DMAs of multi-channels and interrupt
-depend on a master state's DMA, and changing the counters of the master
-state DMA is protected by a spinlock.
-*/
-static int
-ali_write_5_1(struct trident_state *state, const char __user *buf,
-	      int cnt_for_multi_channel, unsigned int *copy_count,
-	      unsigned int *state_cnt)
-{
-
-	struct dmabuf *dmabuf = &state->dmabuf;
-	struct dmabuf *dmabuf_temp;
-	const char __user *buffer = buf;
-	unsigned swptr, other_dma_nums, sample_s;
-	unsigned int i, loop;
-
-	other_dma_nums = 4;
-	sample_s = sample_size[dmabuf->fmt] >> 1;
-	swptr = dmabuf->swptr;
-
-	if ((i = state->multi_channels_adjust_count) > 0) {
-		if (i == 1) {
-			if (copy_from_user(dmabuf->rawbuf + swptr,
-					   buffer, sample_s))
-				return -EFAULT;
-			seek_offset(swptr, buffer, cnt_for_multi_channel,
-				    sample_s, *copy_count);
-			i--;
-			(*state_cnt) += sample_s;
-			state->multi_channels_adjust_count++;
-		} else
-			i = i - (state->chans_num - other_dma_nums);
-		for (; (i < other_dma_nums) && (cnt_for_multi_channel > 0); i++) {
-			dmabuf_temp = &state->other_states[i]->dmabuf;
-			if (copy_from_user(dmabuf_temp->rawbuf + dmabuf_temp->swptr,
-					   buffer, sample_s))
-				return -EFAULT;
-			seek_offset(dmabuf_temp->swptr, buffer, cnt_for_multi_channel,
-				    sample_s, *copy_count);
-		}
-		if (cnt_for_multi_channel == 0)
-			state->multi_channels_adjust_count += i;
-	}
-	if (cnt_for_multi_channel > 0) {
-		loop = cnt_for_multi_channel / (state->chans_num * sample_s);
-		for (i = 0; i < loop; i++) {
-			if (copy_from_user(dmabuf->rawbuf + swptr, buffer,
-					   sample_s * 2))
-				return -EFAULT;
-			seek_offset(swptr, buffer, cnt_for_multi_channel,
-				    sample_s * 2, *copy_count);
-			(*state_cnt) += (sample_s * 2);
-
-			dmabuf_temp = &state->other_states[0]->dmabuf;
-			if (copy_from_user(dmabuf_temp->rawbuf + dmabuf_temp->swptr,
-					   buffer, sample_s))
-				return -EFAULT;
-			seek_offset(dmabuf_temp->swptr, buffer, cnt_for_multi_channel,
-				    sample_s, *copy_count);
-
-			dmabuf_temp = &state->other_states[1]->dmabuf;
-			if (copy_from_user(dmabuf_temp->rawbuf + dmabuf_temp->swptr,
-					   buffer, sample_s))
-				return -EFAULT;
-			seek_offset(dmabuf_temp->swptr, buffer, cnt_for_multi_channel,
-				    sample_s, *copy_count);
-
-			dmabuf_temp = &state->other_states[2]->dmabuf;
-			if (copy_from_user(dmabuf_temp->rawbuf + dmabuf_temp->swptr,
-					   buffer, sample_s))
-				return -EFAULT;
-			seek_offset(dmabuf_temp->swptr, buffer, cnt_for_multi_channel,
-				    sample_s, *copy_count);
-
-			dmabuf_temp = &state->other_states[3]->dmabuf;
-			if (copy_from_user(dmabuf_temp->rawbuf + dmabuf_temp->swptr,
-					   buffer, sample_s))
-				return -EFAULT;
-			seek_offset(dmabuf_temp->swptr, buffer, cnt_for_multi_channel,
-				    sample_s, *copy_count);
-		}
-
-		if (cnt_for_multi_channel > 0) {
-			state->multi_channels_adjust_count = cnt_for_multi_channel / sample_s;
-
-			if (copy_from_user(dmabuf->rawbuf + swptr, buffer, sample_s))
-				return -EFAULT;
-			seek_offset(swptr, buffer, cnt_for_multi_channel,
-				    sample_s, *copy_count);
-			(*state_cnt) += sample_s;
-
-			if (cnt_for_multi_channel > 0) {
-				if (copy_from_user(dmabuf->rawbuf + swptr,
-						   buffer, sample_s))
-					return -EFAULT;
-				seek_offset(swptr, buffer, cnt_for_multi_channel,
-					    sample_s, *copy_count);
-				(*state_cnt) += sample_s;
-
-				if (cnt_for_multi_channel > 0) {
-					int diff = state->chans_num - other_dma_nums;
-					loop = state->multi_channels_adjust_count - diff;
-					for (i = 0; i < loop; i++) {
-						dmabuf_temp = &state->other_states[i]->dmabuf;
-						if (copy_from_user(dmabuf_temp->rawbuf +
-								   dmabuf_temp->swptr,
-								   buffer, sample_s))
-							return -EFAULT;
-						seek_offset(dmabuf_temp->swptr, buffer,
-							    cnt_for_multi_channel,
-							    sample_s, *copy_count);
-					}
-				}
-			}
-		} else
-			state->multi_channels_adjust_count = 0;
-	}
-	for (i = 0; i < other_dma_nums; i++) {
-		dmabuf_temp = &state->other_states[i]->dmabuf;
-		dmabuf_temp->swptr = dmabuf_temp->swptr % dmabuf_temp->dmasize;
-	}
-	return *state_cnt;
-}
-
-static void
-ali_free_other_states_resources(struct trident_state *state)
-{
-	int i;
-	struct trident_card *card = state->card;
-	struct trident_state *s;
-	unsigned other_states_count;
-
-	other_states_count = state->chans_num - 2; /* except PCM L/R channels */
-	for (i = 0; i < other_states_count; i++) {
-		s = state->other_states[i];
-		dealloc_dmabuf(&s->dmabuf, card->pci_dev);
-		ali_disable_special_channel(s->card, s->dmabuf.channel->num);
-		state->card->free_pcm_channel(s->card, s->dmabuf.channel->num);
-		card->states[s->virt] = NULL;
-		kfree(s);
-	}
-}
-
-static struct proc_dir_entry *res;
-
-static int
-ali_write_proc(struct file *file, const char __user *buffer, unsigned long count, void *data)
-{
-	struct trident_card *card = (struct trident_card *) data;
-	unsigned long flags;
-	char c;
-
-	if (count < 0)
-		return -EINVAL;
-	if (count == 0)
-		return 0;
-	if (get_user(c, buffer))
-		return -EFAULT;
-
-	spin_lock_irqsave(&card->lock, flags);
-	switch (c) {
-	case '0':
-		ali_setup_spdif_out(card, ALI_PCM_TO_SPDIF_OUT);
-		ali_disable_special_channel(card, ALI_SPDIF_OUT_CHANNEL);
-		break;
-	case '1':
-		ali_setup_spdif_out(card, ALI_SPDIF_OUT_TO_SPDIF_OUT |
-				    ALI_SPDIF_OUT_PCM);
-		break;
-	case '2':
-		ali_setup_spdif_out(card, ALI_SPDIF_OUT_TO_SPDIF_OUT |
-				    ALI_SPDIF_OUT_NON_PCM);
-		break;
-	case '3':
-		ali_disable_spdif_in(card);	//default
-		break;
-	case '4':
-		ali_setup_spdif_in(card);
-		break;
-	}
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	return count;
-}
-
-/* OSS /dev/mixer file operation methods */
-static int
-trident_open_mixdev(struct inode *inode, struct file *file)
-{
-	int i = 0;
-	int minor = iminor(inode);
-	struct trident_card *card = devs;
-
-	for (card = devs; card != NULL; card = card->next)
-		for (i = 0; i < NR_AC97; i++)
-			if (card->ac97_codec[i] != NULL &&
-			    card->ac97_codec[i]->dev_mixer == minor)
-				goto match;
-
-	if (!card) {
-		return -ENODEV;
-	}
-      match:
-	file->private_data = card->ac97_codec[i];
-
-	return nonseekable_open(inode, file);
-}
-
-static int
-trident_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
-{
-	struct ac97_codec *codec = (struct ac97_codec *) file->private_data;
-
-	return codec->mixer_ioctl(codec, cmd, arg);
-}
-
-static const struct file_operations trident_mixer_fops = {
-	.owner = THIS_MODULE,
-	.llseek = no_llseek,
-	.ioctl = trident_ioctl_mixdev,
-	.open = trident_open_mixdev,
-};
-
-static int
-ali_reset_5451(struct trident_card *card)
-{
-	struct pci_dev *pci_dev = NULL;
-	unsigned int dwVal;
-	unsigned short wCount, wReg;
-
-	pci_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
-				 pci_dev);
-	if (pci_dev == NULL)
-		return -1;
-
-	pci_read_config_dword(pci_dev, 0x7c, &dwVal);
-	pci_write_config_dword(pci_dev, 0x7c, dwVal | 0x08000000);
-	udelay(5000);
-	pci_read_config_dword(pci_dev, 0x7c, &dwVal);
-	pci_write_config_dword(pci_dev, 0x7c, dwVal & 0xf7ffffff);
-	udelay(5000);
-	pci_dev_put(pci_dev);
-
-	pci_dev = card->pci_dev;
-	if (pci_dev == NULL)
-		return -1;
-
-	pci_read_config_dword(pci_dev, 0x44, &dwVal);
-	pci_write_config_dword(pci_dev, 0x44, dwVal | 0x000c0000);
-	udelay(500);
-	pci_read_config_dword(pci_dev, 0x44, &dwVal);
-	pci_write_config_dword(pci_dev, 0x44, dwVal & 0xfffbffff);
-	udelay(5000);
-
-	/* TODO: recognize if we have a PM capable codec and only do this */
-	/* if the codec is PM capable */
-	wCount = 2000;
-	while (wCount--) {
-		wReg = ali_ac97_get(card, 0, AC97_POWER_CONTROL);
-		if ((wReg & 0x000f) == 0x000f)
-			return 0;
-		udelay(5000);
-	}
-	/* This is non fatal if you have a non PM capable codec.. */
-	return 0;
-}
-
-/* AC97 codec initialisation. */
-static int __devinit
-trident_ac97_init(struct trident_card *card)
-{
-	int num_ac97 = 0;
-	unsigned long ready_2nd = 0;
-	struct ac97_codec *codec;
-	int i = 0;
-
-	/* initialize controller side of AC link, and find out if secondary codes
-	   really exist */
-	switch (card->pci_id) {
-	case PCI_DEVICE_ID_ALI_5451:
-		if (ali_reset_5451(card)) {
-			printk(KERN_ERR "trident_ac97_init: error "
-			       "resetting 5451.\n");
-			return -1;
-		}
-		outl(0x80000001, TRID_REG(card, ALI_GLOBAL_CONTROL));
-		outl(0x00000000, TRID_REG(card, T4D_AINTEN_A));
-		outl(0xffffffff, TRID_REG(card, T4D_AINT_A));
-		outl(0x00000000, TRID_REG(card, T4D_MUSICVOL_WAVEVOL));
-		outb(0x10, TRID_REG(card, ALI_MPUR2));
-		ready_2nd = inl(TRID_REG(card, ALI_SCTRL));
-		ready_2nd &= 0x3fff;
-		outl(ready_2nd | PCMOUT | 0x8000, TRID_REG(card, ALI_SCTRL));
-		ready_2nd = inl(TRID_REG(card, ALI_SCTRL));
-		ready_2nd &= SI_AC97_SECONDARY_READY;
-		if (card->revision < ALI_5451_V02)
-			ready_2nd = 0;
-		break;
-	case PCI_DEVICE_ID_SI_7018:
-		/* disable AC97 GPIO interrupt */
-		outl(0x00, TRID_REG(card, SI_AC97_GPIO));
-		/* when power up the AC link is in cold reset mode so stop it */
-		outl(PCMOUT | SURROUT | CENTEROUT | LFEOUT | SECONDARY_ID,
-		     TRID_REG(card, SI_SERIAL_INTF_CTRL));
-		/* it take a long time to recover from a cold reset */
-		/* (especially when you have more than one codec) */
-		udelay(2000);
-		ready_2nd = inl(TRID_REG(card, SI_SERIAL_INTF_CTRL));
-		ready_2nd &= SI_AC97_SECONDARY_READY;
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_DX:
-		/* playback on */
-		outl(DX_AC97_PLAYBACK, TRID_REG(card, DX_ACR2_AC97_COM_STAT));
-		break;
-	case PCI_DEVICE_ID_TRIDENT_4DWAVE_NX:
-		/* enable AC97 Output Slot 3,4 (PCM Left/Right Playback) */
-		outl(NX_AC97_PCM_OUTPUT, TRID_REG(card, NX_ACR0_AC97_COM_STAT));
-		ready_2nd = inl(TRID_REG(card, NX_ACR0_AC97_COM_STAT));
-		ready_2nd &= NX_AC97_SECONDARY_READY;
-		break;
-	case PCI_DEVICE_ID_INTERG_5050:
-		/* disable AC97 GPIO interrupt */
-		outl(0x00, TRID_REG(card, SI_AC97_GPIO));
-		/* when power up, the AC link is in cold reset mode, so stop it */
-		outl(PCMOUT | SURROUT | CENTEROUT | LFEOUT,
-		     TRID_REG(card, SI_SERIAL_INTF_CTRL));
-		/* it take a long time to recover from a cold reset (especially */
-		/* when you have more than one codec) */
-		udelay(2000);
-		ready_2nd = inl(TRID_REG(card, SI_SERIAL_INTF_CTRL));
-		ready_2nd &= SI_AC97_SECONDARY_READY;
-		break;
-	}
-
-	for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
-		if ((codec = ac97_alloc_codec()) == NULL)
-			return -ENOMEM;
-
-		/* initialize some basic codec information, other fields */
-		/* will be filled in ac97_probe_codec */
-		codec->private_data = card;
-		codec->id = num_ac97;
-
-		if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-			codec->codec_read = ali_ac97_read;
-			codec->codec_write = ali_ac97_write;
-		} else {
-			codec->codec_read = trident_ac97_get;
-			codec->codec_write = trident_ac97_set;
-		}
-
-		if (ac97_probe_codec(codec) == 0)
-			break;
-
-		codec->dev_mixer = register_sound_mixer(&trident_mixer_fops, -1);
-		if (codec->dev_mixer < 0) {
-			printk(KERN_ERR "trident: couldn't register mixer!\n");
-			ac97_release_codec(codec);
-			break;
-		}
-
-		card->ac97_codec[num_ac97] = codec;
-
-		/* if there is no secondary codec at all, don't probe any more */
-		if (!ready_2nd)
-			break;
-	}
-
-	if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-		for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
-			if (card->ac97_codec[num_ac97] == NULL)
-				break;
-			for (i = 0; i < 64; i++) {
-				u16 reg = ali_ac97_get(card, num_ac97, i * 2);
-				card->mixer_regs[i][num_ac97] = reg;
-			}
-		}
-	}
-	return num_ac97 + 1;
-}
-
-#ifdef SUPPORT_JOYSTICK
-/* Gameport functions for the cards ADC gameport */
-
-static unsigned char trident_game_read(struct gameport *gameport)
-{
-	struct trident_card *card = gameport->port_data;
-
-	return inb(TRID_REG(card, T4D_GAME_LEG));
-}
-
-static void trident_game_trigger(struct gameport *gameport)
-{
-	struct trident_card *card = gameport->port_data;
-
-	outb(0xff, TRID_REG(card, T4D_GAME_LEG));
-}
-
-static int trident_game_cooked_read(struct gameport *gameport,
-				    int *axes, int *buttons)
-{
-	struct trident_card *card = gameport->port_data;
-	int i;
-
-	*buttons = (~inb(TRID_REG(card, T4D_GAME_LEG)) >> 4) & 0xf;
-
-	for (i = 0; i < 4; i++) {
-		axes[i] = inw(TRID_REG(card, T4D_GAME_AXD) + i * sizeof (u16));
-		if (axes[i] == 0xffff)
-			axes[i] = -1;
-	}
-
-	return 0;
-}
-
-static int trident_game_open(struct gameport *gameport, int mode)
-{
-	struct trident_card *card = gameport->port_data;
-
-	switch (mode) {
-	case GAMEPORT_MODE_COOKED:
-		outb(0x80, TRID_REG(card, T4D_GAME_CR));
-		msleep(20);
-		return 0;
-	case GAMEPORT_MODE_RAW:
-		outb(0x00, TRID_REG(card, T4D_GAME_CR));
-		return 0;
-	default:
-		return -1;
-	}
-
-	return 0;
-}
-
-static int __devinit trident_register_gameport(struct trident_card *card)
-{
-	struct gameport *gp;
-
-	card->gameport = gp = gameport_allocate_port();
-	if (!gp) {
-		printk(KERN_ERR "trident: can not allocate memory for gameport\n");
-		return -ENOMEM;
-	}
-
-	gameport_set_name(gp, "Trident 4DWave");
-	gameport_set_phys(gp, "pci%s/gameport0", pci_name(card->pci_dev));
-	gp->read = trident_game_read;
-	gp->trigger = trident_game_trigger;
-	gp->cooked_read = trident_game_cooked_read;
-	gp->open = trident_game_open;
-	gp->fuzz = 64;
-	gp->port_data = card;
-
-	gameport_register_port(gp);
-
-	return 0;
-}
-
-static inline void trident_unregister_gameport(struct trident_card *card)
-{
-	if (card->gameport)
-		gameport_unregister_port(card->gameport);
-}
-
-#else
-static inline int trident_register_gameport(struct trident_card *card) { return -ENOSYS; }
-static inline void trident_unregister_gameport(struct trident_card *card) { }
-#endif /* SUPPORT_JOYSTICK */
-
-/* install the driver, we do not allocate hardware channel nor DMA buffer */
-/* now, they are defered until "ACCESS" time (in prog_dmabuf called by */
-/* open/read/write/ioctl/mmap) */
-static int __devinit
-trident_probe(struct pci_dev *pci_dev, const struct pci_device_id *pci_id)
-{
-	unsigned long iobase;
-	struct trident_card *card;
-	u8 bits;
-	u8 revision;
-	int i = 0;
-	u16 temp;
-	struct pci_dev *pci_dev_m1533 = NULL;
-	int rc = -ENODEV;
-	u64 dma_mask;
-
-	if (pci_enable_device(pci_dev))
-		goto out;
-
-	if (pci_dev->device == PCI_DEVICE_ID_ALI_5451)
-		dma_mask = ALI_DMA_MASK;
-	else
-		dma_mask = TRIDENT_DMA_MASK;
-	if (pci_set_dma_mask(pci_dev, dma_mask)) {
-		printk(KERN_ERR "trident: architecture does not support"
-		       " %s PCI busmaster DMA\n",
-		       pci_dev->device == PCI_DEVICE_ID_ALI_5451 ?
-		       "32-bit" : "30-bit");
-		goto out;
-	}
-	pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &revision);
-
-	if (pci_id->device == PCI_DEVICE_ID_INTERG_5050)
-		iobase = pci_resource_start(pci_dev, 1);
-	else
-		iobase = pci_resource_start(pci_dev, 0);
-
-	if (!request_region(iobase, 256, card_names[pci_id->driver_data])) {
-		printk(KERN_ERR "trident: can't allocate I/O space at "
-		       "0x%4.4lx\n", iobase);
-		goto out;
-	}
-
-	rc = -ENOMEM;
-	if ((card = kzalloc(sizeof(*card), GFP_KERNEL)) == NULL) {
-		printk(KERN_ERR "trident: out of memory\n");
-		goto out_release_region;
-	}
-
-	init_timer(&card->timer);
-	card->iobase = iobase;
-	card->pci_dev = pci_dev_get(pci_dev);
-	card->pci_id = pci_id->device;
-	card->revision = revision;
-	card->irq = pci_dev->irq;
-	card->next = devs;
-	card->magic = TRIDENT_CARD_MAGIC;
-	card->banks[BANK_A].addresses = &bank_a_addrs;
-	card->banks[BANK_A].bitmap = 0UL;
-	card->banks[BANK_B].addresses = &bank_b_addrs;
-	card->banks[BANK_B].bitmap = 0UL;
-
-	mutex_init(&card->open_mutex);
-	spin_lock_init(&card->lock);
-	init_timer(&card->timer);
-
-	devs = card;
-
-	pci_set_master(pci_dev);
-
-	printk(KERN_INFO "trident: %s found at IO 0x%04lx, IRQ %d\n",
-	       card_names[pci_id->driver_data], card->iobase, card->irq);
-
-	if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-		/* ALi channel Management */
-		card->alloc_pcm_channel = ali_alloc_pcm_channel;
-		card->alloc_rec_pcm_channel = ali_alloc_rec_pcm_channel;
-		card->free_pcm_channel = ali_free_pcm_channel;
-
-		card->address_interrupt = ali_address_interrupt;
-
-		/* Added by Matt Wu 01-05-2001 for spdif in */
-		card->multi_channel_use_count = 0;
-		card->rec_channel_use_count = 0;
-
-		/* ALi SPDIF OUT function */
-		if (card->revision == ALI_5451_V02) {
-			ali_setup_spdif_out(card, ALI_PCM_TO_SPDIF_OUT);
-			res = create_proc_entry("ALi5451", 0, NULL);
-			if (res) {
-				res->write_proc = ali_write_proc;
-				res->data = card;
-			}
-		}
-
-		/* Add H/W Volume Control By Matt Wu Jul. 06, 2001 */
-		card->hwvolctl = 0;
-		pci_dev_m1533 = pci_get_device(PCI_VENDOR_ID_AL,
-					       PCI_DEVICE_ID_AL_M1533,
-					       pci_dev_m1533);
-		rc = -ENODEV;
-		if (pci_dev_m1533 == NULL)
-			goto out_proc_fs;
-		pci_read_config_byte(pci_dev_m1533, 0x63, &bits);
-		if (bits & (1 << 5))
-			card->hwvolctl = 1;
-		if (card->hwvolctl) {
-			/* Clear m1533 pci cfg 78h bit 30 to zero, which makes
-			   GPIO11/12/13 work as ACGP_UP/DOWN/MUTE. */
-			pci_read_config_byte(pci_dev_m1533, 0x7b, &bits);
-			bits &= 0xbf;	/*clear bit 6 */
-			pci_write_config_byte(pci_dev_m1533, 0x7b, bits);
-		}
-		pci_dev_put(pci_dev_m1533);
-
-	} else if (card->pci_id == PCI_DEVICE_ID_INTERG_5050) {
-		card->alloc_pcm_channel = cyber_alloc_pcm_channel;
-		card->alloc_rec_pcm_channel = cyber_alloc_pcm_channel;
-		card->free_pcm_channel = cyber_free_pcm_channel;
-		card->address_interrupt = cyber_address_interrupt;
-		cyber_init_ritual(card);
-	} else {
-		card->alloc_pcm_channel = trident_alloc_pcm_channel;
-		card->alloc_rec_pcm_channel = trident_alloc_pcm_channel;
-		card->free_pcm_channel = trident_free_pcm_channel;
-		card->address_interrupt = trident_address_interrupt;
-	}
-
-	/* claim our irq */
-	rc = -ENODEV;
-	if (request_irq(card->irq, &trident_interrupt, IRQF_SHARED,
-			card_names[pci_id->driver_data], card)) {
-		printk(KERN_ERR "trident: unable to allocate irq %d\n",
-		       card->irq);
-		goto out_proc_fs;
-	}
-	/* register /dev/dsp */
-	if ((card->dev_audio = register_sound_dsp(&trident_audio_fops, -1)) < 0) {
-		printk(KERN_ERR "trident: couldn't register DSP device!\n");
-		goto out_free_irq;
-	}
-	card->mixer_regs_ready = 0;
-	/* initialize AC97 codec and register /dev/mixer */
-	if (trident_ac97_init(card) <= 0) {
-		/* unregister audio devices */
-		for (i = 0; i < NR_AC97; i++) {
-			if (card->ac97_codec[i] != NULL) {
-				struct ac97_codec* codec = card->ac97_codec[i];
-				unregister_sound_mixer(codec->dev_mixer);
-				ac97_release_codec(codec);
-			}
-		}
-		goto out_unregister_sound_dsp;
-	}
-	card->mixer_regs_ready = 1;
-	outl(0x00, TRID_REG(card, T4D_MUSICVOL_WAVEVOL));
-
-	if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-		/* Add H/W Volume Control By Matt Wu Jul. 06, 2001 */
-		if (card->hwvolctl) {
-			/* Enable GPIO IRQ (MISCINT bit 18h) */
-			temp = inw(TRID_REG(card, T4D_MISCINT + 2));
-			temp |= 0x0004;
-			outw(temp, TRID_REG(card, T4D_MISCINT + 2));
-
-			/* Enable H/W Volume Control GLOVAL CONTROL bit 0 */
-			temp = inw(TRID_REG(card, ALI_GLOBAL_CONTROL));
-			temp |= 0x0001;
-			outw(temp, TRID_REG(card, ALI_GLOBAL_CONTROL));
-
-		}
-		if (card->revision == ALI_5451_V02)
-			ali_close_multi_channels();
-		/* edited by HMSEO for GT sound */
-#if defined(CONFIG_ALPHA_NAUTILUS) || defined(CONFIG_ALPHA_GENERIC)
-		{
-			u16 ac97_data;
-			extern struct hwrpb_struct *hwrpb;
-
-			if ((hwrpb->sys_type) == 201) {
-				printk(KERN_INFO "trident: Running on Alpha system "
-				       "type Nautilus\n");
-				ac97_data = ali_ac97_get(card, 0, AC97_POWER_CONTROL);
-				ali_ac97_set(card, 0, AC97_POWER_CONTROL,
-					     ac97_data | ALI_EAPD_POWER_DOWN);
-			}
-		}
-#endif				/* CONFIG_ALPHA_NAUTILUS || CONFIG_ALPHA_GENERIC */
-		/* edited by HMSEO for GT sound */
-	}
-	rc = 0;
-	pci_set_drvdata(pci_dev, card);
-
-	/* Enable Address Engine Interrupts */
-	trident_enable_loop_interrupts(card);
-
-	/* Register gameport */
-	trident_register_gameport(card);
-
-out:
-	return rc;
-
-out_unregister_sound_dsp:
-	unregister_sound_dsp(card->dev_audio);
-out_free_irq:
-	free_irq(card->irq, card);
-out_proc_fs:
-	pci_dev_put(card->pci_dev);
-	if (res) {
-		remove_proc_entry("ALi5451", NULL);
-		res = NULL;
-	}
-	kfree(card);
-	devs = NULL;
-out_release_region:
-	release_region(iobase, 256);
-	return rc;
-}
-
-static void __devexit
-trident_remove(struct pci_dev *pci_dev)
-{
-	int i;
-	struct trident_card *card = pci_get_drvdata(pci_dev);
-
-	/*
-	 *      Kill running timers before unload. We can't have them
-	 *      going off after rmmod!
-	 */
-	if (card->hwvolctl)
-		del_timer_sync(&card->timer);
-
-	/* ALi S/PDIF and Power Management */
-	if (card->pci_id == PCI_DEVICE_ID_ALI_5451) {
-		ali_setup_spdif_out(card, ALI_PCM_TO_SPDIF_OUT);
-		ali_disable_special_channel(card, ALI_SPDIF_OUT_CHANNEL);
-		ali_disable_spdif_in(card);
-		remove_proc_entry("ALi5451", NULL);
-	}
-
-	/* Unregister gameport */
-	trident_unregister_gameport(card);
-
-	/* Kill interrupts, and SP/DIF */
-	trident_disable_loop_interrupts(card);
-
-	/* free hardware resources */
-	free_irq(card->irq, card);
-	release_region(card->iobase, 256);
-
-	/* unregister audio devices */
-	for (i = 0; i < NR_AC97; i++)
-		if (card->ac97_codec[i] != NULL) {
-			unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
-			ac97_release_codec(card->ac97_codec[i]);
-		}
-	unregister_sound_dsp(card->dev_audio);
-
-	pci_set_drvdata(pci_dev, NULL);
-	pci_dev_put(card->pci_dev);
-	kfree(card);
-}
-
-MODULE_AUTHOR("Alan Cox, Aaron Holtzman, Ollie Lho, Ching Ling Lee, Muli Ben-Yehuda");
-MODULE_DESCRIPTION("Trident 4DWave/SiS 7018/ALi 5451 and Tvia/IGST CyberPro5050 PCI "
-		   "Audio Driver");
-MODULE_LICENSE("GPL");
-
-#define TRIDENT_MODULE_NAME "trident"
-
-static struct pci_driver trident_pci_driver = {
-	.name = TRIDENT_MODULE_NAME,
-	.id_table = trident_pci_tbl,
-	.probe = trident_probe,
-	.remove = __devexit_p(trident_remove),
-#ifdef CONFIG_PM
-	.suspend = trident_suspend,
-	.resume = trident_resume
-#endif
-};
-
-static int __init
-trident_init_module(void)
-{
-	printk(KERN_INFO "Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro "
-	       "5050 PCI Audio, version " DRIVER_VERSION ", " __TIME__ " "
-	       __DATE__ "\n");
-
-	return pci_register_driver(&trident_pci_driver);
-}
-
-static void __exit
-trident_cleanup_module(void)
-{
-	pci_unregister_driver(&trident_pci_driver);
-}
-
-module_init(trident_init_module);
-module_exit(trident_cleanup_module);
diff --git a/sound/oss/trident.h b/sound/oss/trident.h
deleted file mode 100644
index ff30a1d7c2f..00000000000
--- a/sound/oss/trident.h
+++ /dev/null
@@ -1,358 +0,0 @@
-#ifndef __TRID4DWAVE_H
-#define __TRID4DWAVE_H
-
-/*
- *  audio@tridentmicro.com
- *  Fri Feb 19 15:55:28 MST 1999
- *  Definitions for Trident 4DWave DX/NX chips
- *
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* PCI vendor and device ID */ 
-#ifndef PCI_VENDOR_ID_TRIDENT
-#define PCI_VENDOR_ID_TRIDENT		0x1023
-#endif
-
-#ifndef PCI_VENDOR_ID_SI
-#define PCI_VENDOR_ID_SI			0x1039
-#endif
-
-#ifndef PCI_VENDOR_ID_ALI
-#define PCI_VENDOR_ID_ALI			0x10b9
-#endif
-
-#ifndef PCI_DEVICE_ID_TRIDENT_4DWAVE_DX
-#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
-#endif
-
-#ifndef PCI_DEVICE_ID_TRIDENT_4DWAVE_NX
-#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001
-#endif
-
-#ifndef PCI_DEVICE_ID_SI_7018
-#define PCI_DEVICE_ID_SI_7018		0x7018
-#endif
-
-#ifndef PCI_DEVICE_ID_ALI_5451
-#define PCI_DEVICE_ID_ALI_5451		0x5451
-#endif
-
-#ifndef PCI_DEVICE_ID_ALI_1533
-#define PCI_DEVICE_ID_ALI_1533		0x1533
-#endif
-
-#define CHANNEL_REGS	5
-#define CHANNEL_START	0xe0   // The first bytes of the contiguous register space.
-
-#define BANK_A 		0
-#define BANK_B 		1
-#define NR_BANKS		2
-
-#define TRIDENT_FMT_STEREO     0x01
-#define TRIDENT_FMT_16BIT      0x02
-#define TRIDENT_FMT_MASK       0x03
-
-#define DAC_RUNNING	0x01
-#define ADC_RUNNING	0x02
-
-/* Register Addresses */
-
-/* operational registers common to DX, NX, 7018 */
-enum trident_op_registers {
-	T4D_GAME_CR	= 0x30, T4D_GAME_LEG	= 0x31,
-	T4D_GAME_AXD	= 0x34,
-	T4D_REC_CH	= 0x70,
-	T4D_START_A     = 0x80, T4D_STOP_A      = 0x84,
-	T4D_DLY_A       = 0x88, T4D_SIGN_CSO_A  = 0x8c,
-	T4D_CSPF_A      = 0x90, T4D_CEBC_A      = 0x94,
-	T4D_AINT_A      = 0x98, T4D_EINT_A	= 0x9c,
-	T4D_LFO_GC_CIR	= 0xa0, T4D_AINTEN_A    = 0xa4,
-	T4D_MUSICVOL_WAVEVOL = 0xa8, T4D_SBDELTA_DELTA_R = 0xac,
-	T4D_MISCINT	= 0xb0, T4D_START_B     = 0xb4,
-	T4D_STOP_B      = 0xb8, T4D_CSPF_B	= 0xbc,
-	T4D_SBBL_SBCL	= 0xc0, T4D_SBCTRL_SBE2R_SBDD    = 0xc4,
-	T4D_STIMER	= 0xc8, T4D_LFO_B_I2S_DELTA      = 0xcc,
-	T4D_AINT_B	= 0xd8, T4D_AINTEN_B	= 0xdc,
-	ALI_MPUR2	= 0x22,	ALI_GPIO	= 0x7c,
-	ALI_EBUF1 = 0xf4,
-	ALI_EBUF2 = 0xf8
-};
-
-enum ali_op_registers {
-	ALI_SCTRL		= 0x48,
-	ALI_GLOBAL_CONTROL	= 0xd4,
-	ALI_STIMER		= 0xc8,
-	ALI_SPDIF_CS		= 0x70,
-	ALI_SPDIF_CTRL		= 0x74
-};
-
-enum ali_registers_number {
-	ALI_GLOBAL_REGS		= 56,
-	ALI_CHANNEL_REGS	= 8,
-	ALI_MIXER_REGS		= 20
-};
-
-enum ali_sctrl_control_bit {
-	ALI_SPDIF_OUT_ENABLE	= 0x20
-};
-
-enum ali_global_control_bit {
-	ALI_SPDIF_OUT_SEL_PCM	= 0x00000400,
-	ALI_SPDIF_IN_SUPPORT	= 0x00000800,
-	ALI_SPDIF_OUT_CH_ENABLE	= 0x00008000,
-	ALI_SPDIF_IN_CH_ENABLE	= 0x00080000,
-	ALI_PCM_IN_DISABLE	= 0x7fffffff,
-	ALI_PCM_IN_ENABLE	= 0x80000000,
-	ALI_SPDIF_IN_CH_DISABLE	= 0xfff7ffff,
-	ALI_SPDIF_OUT_CH_DISABLE = 0xffff7fff,
-	ALI_SPDIF_OUT_SEL_SPDIF	= 0xfffffbff
-	
-};
-
-enum ali_spdif_control_bit {
-	ALI_SPDIF_IN_FUNC_ENABLE	= 0x02,
-	ALI_SPDIF_IN_CH_STATUS		= 0x40,
-	ALI_SPDIF_OUT_CH_STATUS		= 0xbf
-	
-};
-
-enum ali_control_all {
-	ALI_DISABLE_ALL_IRQ	= 0,
-	ALI_CHANNELS		= 32,
-	ALI_STOP_ALL_CHANNELS	= 0xffffffff,
-	ALI_MULTI_CHANNELS_START_STOP	= 0x07800000
-};
-
-enum ali_EMOD_control_bit {
-	ALI_EMOD_DEC	= 0x00000000,
-	ALI_EMOD_INC	= 0x10000000,
-	ALI_EMOD_Delay	= 0x20000000,
-	ALI_EMOD_Still	= 0x30000000
-};
-
-enum ali_pcm_in_channel_num {
-	ALI_NORMAL_CHANNEL	= 0,
-	ALI_SPDIF_OUT_CHANNEL	= 15,
-	ALI_SPDIF_IN_CHANNEL    = 19,
-	ALI_LEF_CHANNEL		= 23,
-	ALI_CENTER_CHANNEL	= 24,
-	ALI_SURR_RIGHT_CHANNEL	= 25,
-	ALI_SURR_LEFT_CHANNEL	= 26,
-	ALI_PCM_IN_CHANNEL	= 31
-};
-
-enum ali_pcm_out_channel_num {
-	ALI_PCM_OUT_CHANNEL_FIRST = 0,
-	ALI_PCM_OUT_CHANNEL_LAST = 31
-};
-
-enum ali_ac97_power_control_bit {
-	ALI_EAPD_POWER_DOWN	= 0x8000
-};
-
-enum ali_update_ptr_flags {
-	ALI_ADDRESS_INT_UPDATE	= 0x01
-};
-
-enum ali_revision {
-	ALI_5451_V02	= 0x02
-};
-
-enum ali_spdif_out_control {
-	ALI_PCM_TO_SPDIF_OUT		= 0,
-	ALI_SPDIF_OUT_TO_SPDIF_OUT	= 1,
-	ALI_SPDIF_OUT_PCM		= 0,
-	ALI_SPDIF_OUT_NON_PCM		= 2
-};
-
-/* S/PDIF Operational Registers for 4D-NX */
-enum nx_spdif_registers {
-	NX_SPCTRL_SPCSO	= 0x24, NX_SPLBA = 0x28,
-	NX_SPESO	= 0x2c, NX_SPCSTATUS = 0x64
-};
-
-/* OP registers to access each hardware channel */
-enum channel_registers {
-	CH_DX_CSO_ALPHA_FMS = 0xe0, CH_DX_ESO_DELTA = 0xe8,
-	CH_DX_FMC_RVOL_CVOL = 0xec,
-	CH_NX_DELTA_CSO     = 0xe0, CH_NX_DELTA_ESO = 0xe8,
-	CH_NX_ALPHA_FMS_FMC_RVOL_CVOL = 0xec,
-	CH_LBA              = 0xe4,
-	CH_GVSEL_PAN_VOL_CTRL_EC      = 0xf0
-};
-
-/* registers to read/write/control AC97 codec */
-enum dx_ac97_registers {
-	DX_ACR0_AC97_W        = 0x40, DX_ACR1_AC97_R = 0x44,
-	DX_ACR2_AC97_COM_STAT = 0x48
-};
-
-enum nx_ac97_registers {
-	NX_ACR0_AC97_COM_STAT  = 0x40, NX_ACR1_AC97_W           = 0x44,
-	NX_ACR2_AC97_R_PRIMARY = 0x48, NX_ACR3_AC97_R_SECONDARY	= 0x4c
-};
-
-enum si_ac97_registers {
-	SI_AC97_WRITE       = 0x40, SI_AC97_READ = 0x44,
-	SI_SERIAL_INTF_CTRL = 0x48, SI_AC97_GPIO = 0x4c
-};
-
-enum ali_ac97_registers {
-	ALI_AC97_WRITE       = 0x40, ALI_AC97_READ = 0x44
-};
-
-/* Bit mask for operational registers */
-#define AC97_REG_ADDR      0x000000ff
-
-enum ali_ac97_bits {
-	ALI_AC97_BUSY_WRITE = 0x8000, ALI_AC97_BUSY_READ = 0x8000,
-	ALI_AC97_WRITE_ACTION = 0x8000, ALI_AC97_READ_ACTION = 0x8000,
-	ALI_AC97_AUDIO_BUSY = 0x4000, ALI_AC97_SECONDARY  = 0x0080,
-	ALI_AC97_READ_MIXER_REGISTER = 0xfeff,
-	ALI_AC97_WRITE_MIXER_REGISTER = 0x0100
-};
-
-enum sis7018_ac97_bits {
-	SI_AC97_BUSY_WRITE = 0x8000, SI_AC97_BUSY_READ = 0x8000,
-	SI_AC97_AUDIO_BUSY = 0x4000, SI_AC97_MODEM_BUSY = 0x2000,
-	SI_AC97_SECONDARY  = 0x0080
-};
-
-enum trident_dx_ac97_bits {
-	DX_AC97_BUSY_WRITE = 0x8000, DX_AC97_BUSY_READ = 0x8000,
-	DX_AC97_READY      = 0x0010, DX_AC97_RECORD    = 0x0008,
-	DX_AC97_PLAYBACK   = 0x0002
-};
-
-enum trident_nx_ac97_bits {
-	/* ACR1-3 */
-	NX_AC97_BUSY_WRITE = 0x0800, NX_AC97_BUSY_READ = 0x0800,
-	NX_AC97_BUSY_DATA  = 0x0400, NX_AC97_WRITE_SECONDARY = 0x0100,
-	/* ACR0 */
-	NX_AC97_SECONDARY_READY = 0x0040, NX_AC97_SECONDARY_RECORD = 0x0020,
-	NX_AC97_SURROUND_OUTPUT = 0x0010,
-	NX_AC97_PRIMARY_READY   = 0x0008, NX_AC97_PRIMARY_RECORD   = 0x0004,
-	NX_AC97_PCM_OUTPUT      = 0x0002,
-	NX_AC97_WARM_RESET      = 0x0001
-};
-
-enum serial_intf_ctrl_bits {
-	WARM_REST   = 0x00000001, COLD_RESET  = 0x00000002,
-	I2S_CLOCK   = 0x00000004, PCM_SEC_AC97= 0x00000008,
-	AC97_DBL_RATE = 0x00000010, SPDIF_EN  = 0x00000020,
-	I2S_OUTPUT_EN = 0x00000040, I2S_INPUT_EN = 0x00000080,
-	PCMIN       = 0x00000100, LINE1IN     = 0x00000200,
-	MICIN       = 0x00000400, LINE2IN     = 0x00000800,
-	HEAD_SET_IN = 0x00001000, GPIOIN      = 0x00002000,
-	/* 7018 spec says id = 01 but the demo board routed to 10 
-	   SECONDARY_ID= 0x00004000, */
-	SECONDARY_ID= 0x00004000,
-	PCMOUT      = 0x00010000, SURROUT     = 0x00020000,
-	CENTEROUT   = 0x00040000, LFEOUT      = 0x00080000,
-	LINE1OUT    = 0x00100000, LINE2OUT    = 0x00200000,
-	GPIOOUT     = 0x00400000,
-	SI_AC97_PRIMARY_READY   = 0x01000000,
-	SI_AC97_SECONDARY_READY = 0x02000000,
-};
-
-enum global_control_bits {
-	CHANNLE_IDX = 0x0000003f, PB_RESET    = 0x00000100,
-	PAUSE_ENG   = 0x00000200,
-	OVERRUN_IE  = 0x00000400, UNDERRUN_IE = 0x00000800,
-	ENDLP_IE    = 0x00001000, MIDLP_IE    = 0x00002000,
-	ETOG_IE     = 0x00004000,
-	EDROP_IE    = 0x00008000, BANK_B_EN   = 0x00010000
-};
-
-enum channel_control_bits {
-	CHANNEL_LOOP   = 0x00001000, CHANNEL_SIGNED = 0x00002000,
-	CHANNEL_STEREO = 0x00004000, CHANNEL_16BITS = 0x00008000,
-};
-
-enum channel_attribute {
-	/* playback/record select */
-	CHANNEL_PB     = 0x0000, CHANNEL_SPC_PB = 0x4000,
-	CHANNEL_REC    = 0x8000, CHANNEL_REC_PB = 0xc000,
-	/* playback destination/record source select */
-	MODEM_LINE1    = 0x0000, MODEM_LINE2    = 0x0400,
-	PCM_LR         = 0x0800, HSET           = 0x0c00,
-	I2S_LR         = 0x1000, CENTER_LFE     = 0x1400,
-	SURR_LR        = 0x1800, SPDIF_LR       = 0x1c00,
-	MIC            = 0x1400,
-	/* mist stuff */
-	MONO_LEFT      = 0x0000, MONO_RIGHT     = 0x0100,
-	MONO_MIX       = 0x0200, SRC_ENABLE     = 0x0080,
-};
-
-enum miscint_bits {
-	PB_UNDERRUN_IRO = 0x00000001, REC_OVERRUN_IRQ = 0x00000002,
-	SB_IRQ          = 0x00000004, MPU401_IRQ      = 0x00000008,
-	OPL3_IRQ        = 0x00000010, ADDRESS_IRQ     = 0x00000020,
-	ENVELOPE_IRQ    = 0x00000040, ST_IRQ          = 0x00000080,
-	PB_UNDERRUN     = 0x00000100, REC_OVERRUN     = 0x00000200,
-	MIXER_UNDERFLOW = 0x00000400, MIXER_OVERFLOW  = 0x00000800,
-	ST_TARGET_REACHED = 0x00008000, PB_24K_MODE   = 0x00010000, 
-	ST_IRQ_EN       = 0x00800000, ACGPIO_IRQ      = 0x01000000
-};
-
-#define TRID_REG( trident, x ) ( (trident) -> iobase + (x) )
-
-#define		CYBER_PORT_AUDIO		0x3CE
-#define		CYBER_IDX_AUDIO_ENABLE          0x7B
-#define		CYBER_BMSK_AUDIO_INT_ENABLE	0x09
-#define		CYBER_BMSK_AUENZ		0x01
-#define		CYBER_BMSK_AUENZ_ENABLE		0x00
-#define		CYBER_IDX_IRQ_ENABLE		0x12
-      
-#define VALIDATE_MAGIC(FOO,MAG)				\
-({						  	\
-	if (!(FOO) || (FOO)->magic != MAG) { 		\
-		printk(invalid_magic,__func__);	\
-		return -ENXIO;			  	\
-	}					  	\
-})
-
-#define VALIDATE_STATE(a) VALIDATE_MAGIC(a,TRIDENT_STATE_MAGIC)
-#define VALIDATE_CARD(a) VALIDATE_MAGIC(a,TRIDENT_CARD_MAGIC)
-
-static inline unsigned ld2(unsigned int x)
-{
-	unsigned r = 0;
-	
-	if (x >= 0x10000) {
-		x >>= 16;
-		r += 16;
-	}
-	if (x >= 0x100) {
-		x >>= 8;
-		r += 8;
-	}
-	if (x >= 0x10) {
-		x >>= 4;
-		r += 4;
-	}
-	if (x >= 4) {
-		x >>= 2;
-		r += 2;
-	}
-	if (x >= 2)
-		r++;
-	return r;
-}
-
-#endif /* __TRID4DWAVE_H */
-- 
cgit v1.2.3


From 76a6f3dc9a7108785c145a298f82c72f9208fe17 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:29:15 -0700
Subject: CONFIG_SOUND_WM97XX: remove stale makefile line

The driver is gone for a long time.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 sound/oss/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index 3a141474fb7..c611514f7ff 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -31,8 +31,6 @@ obj-$(CONFIG_SOUND_VWSND)	+= vwsnd.o
 obj-$(CONFIG_SOUND_AU1550_AC97)	+= au1550_ac97.o ac97_codec.o
 obj-$(CONFIG_SOUND_BCM_CS4297A)	+= swarm_cs4297a.o
 
-obj-$(CONFIG_SOUND_WM97XX)	+= ac97_plugin_wm97xx.o
-
 obj-$(CONFIG_DMASOUND)		+= dmasound/
 
 # Declare multi-part drivers.
-- 
cgit v1.2.3


From 6e2c10a12a2170856f5582d62d583cbcd1cb5eaf Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Wed, 23 Jul 2008 21:29:15 -0700
Subject: binfmt_misc: use simple_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/binfmt_misc.c | 20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)

diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index 7191306367c..756205314c2 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -27,6 +27,7 @@
 #include <linux/namei.h>
 #include <linux/mount.h>
 #include <linux/syscalls.h>
+#include <linux/fs.h>
 
 #include <asm/uaccess.h>
 
@@ -535,31 +536,16 @@ static ssize_t
 bm_entry_read(struct file * file, char __user * buf, size_t nbytes, loff_t *ppos)
 {
 	Node *e = file->f_path.dentry->d_inode->i_private;
-	loff_t pos = *ppos;
 	ssize_t res;
 	char *page;
-	int len;
 
 	if (!(page = (char*) __get_free_page(GFP_KERNEL)))
 		return -ENOMEM;
 
 	entry_status(e, page);
-	len = strlen(page);
 
-	res = -EINVAL;
-	if (pos < 0)
-		goto out;
-	res = 0;
-	if (pos >= len)
-		goto out;
-	if (len < pos + nbytes)
-		nbytes = len - pos;
-	res = -EFAULT;
-	if (copy_to_user(buf, page + pos, nbytes))
-		goto out;
-	*ppos = pos + nbytes;
-	res = nbytes;
-out:
+	res = simple_read_from_buffer(buf, nbytes, ppos, page, strlen(page));
+
 	free_page((unsigned long) page);
 	return res;
 }
-- 
cgit v1.2.3


From a677a039be7243357d93502bff2b40850c942e2d Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:17 -0700
Subject: flag parameters: socket and socketpair

This patch adds support for flag values which are ORed to the type passwd
to socket and socketpair.  The additional code is minimal.  The flag
values in this implementation can and must match the O_* flags.  This
avoids overhead in the conversion.

The internal functions sock_alloc_fd and sock_map_fd get a new parameters
and all callers are changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/socket.h>

#define PORT 57392

/* For Linux these must be the same.  */
#define SOCK_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd;
  fd = socket (PF_INET, SOCK_STREAM, 0);
  if (fd == -1)
    {
      puts ("socket(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("socket(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = socket (PF_INET, SOCK_STREAM|SOCK_CLOEXEC, 0);
  if (fd == -1)
    {
      puts ("socket(SOCK_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("socket(SOCK_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  int fds[2];
  if (socketpair (PF_UNIX, SOCK_STREAM, 0, fds) == -1)
    {
      puts ("socketpair(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      coe = fcntl (fds[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (coe & FD_CLOEXEC)
        {
          printf ("socketpair(0) set close-on-exec flag for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  if (socketpair (PF_UNIX, SOCK_STREAM|SOCK_CLOEXEC, 0, fds) == -1)
    {
      puts ("socketpair(SOCK_CLOEXEC) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      coe = fcntl (fds[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((coe & FD_CLOEXEC) == 0)
        {
          printf ("socketpair(SOCK_CLOEXEC) does not set close-on-exec flag for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-mips/socket.h |  7 +++++++
 include/linux/net.h       |  9 ++++++++-
 net/9p/trans_fd.c         |  2 +-
 net/sctp/socket.c         |  2 +-
 net/socket.c              | 28 ++++++++++++++++++++--------
 5 files changed, 37 insertions(+), 11 deletions(-)

diff --git a/include/asm-mips/socket.h b/include/asm-mips/socket.h
index 63f60254d30..facc2d7a87c 100644
--- a/include/asm-mips/socket.h
+++ b/include/asm-mips/socket.h
@@ -102,6 +102,13 @@ enum sock_type {
 };
 
 #define SOCK_MAX (SOCK_PACKET + 1)
+/* Mask which covers at least up to SOCK_MASK-1.  The
+ *  * remaining bits are used as flags. */
+#define SOCK_TYPE_MASK 0xf
+
+/* Flags for socket, socketpair, paccept */
+#define SOCK_CLOEXEC	O_CLOEXEC
+#define SOCK_NONBLOCK	O_NONBLOCK
 
 #define ARCH_HAS_SOCKET_TYPES 1
 
diff --git a/include/linux/net.h b/include/linux/net.h
index 150a48c68d5..8b5383c45b4 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -20,6 +20,7 @@
 
 #include <linux/wait.h>
 #include <linux/socket.h>
+#include <linux/fcntl.h>	/* For O_CLOEXEC */
 #include <asm/socket.h>
 
 struct poll_table_struct;
@@ -94,6 +95,12 @@ enum sock_type {
 };
 
 #define SOCK_MAX (SOCK_PACKET + 1)
+/* Mask which covers at least up to SOCK_MASK-1.  The
+ * remaining bits are used as flags. */
+#define SOCK_TYPE_MASK 0xf
+
+/* Flags for socket, socketpair, paccept */
+#define SOCK_CLOEXEC	O_CLOEXEC
 
 #endif /* ARCH_HAS_SOCKET_TYPES */
 
@@ -208,7 +215,7 @@ extern int   	     sock_sendmsg(struct socket *sock, struct msghdr *msg,
 				  size_t len);
 extern int	     sock_recvmsg(struct socket *sock, struct msghdr *msg,
 				  size_t size, int flags);
-extern int 	     sock_map_fd(struct socket *sock);
+extern int 	     sock_map_fd(struct socket *sock, int flags);
 extern struct socket *sockfd_lookup(int fd, int *err);
 #define		     sockfd_put(sock) fput(sock->file)
 extern int	     net_ratelimit(void);
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 4507f744f44..cdf137af7ad 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -1285,7 +1285,7 @@ static int p9_socket_open(struct p9_trans *trans, struct socket *csocket)
 	int fd, ret;
 
 	csocket->sk->sk_allocation = GFP_NOIO;
-	fd = sock_map_fd(csocket);
+	fd = sock_map_fd(csocket, 0);
 	if (fd < 0) {
 		P9_EPRINTK(KERN_ERR, "p9_socket_open: failed to map fd\n");
 		return fd;
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 79bece16aed..dbb79adf8f3 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3910,7 +3910,7 @@ static int sctp_getsockopt_peeloff(struct sock *sk, int len, char __user *optval
 		goto out;
 
 	/* Map the socket to an unused fd that can be returned to the user.  */
-	retval = sock_map_fd(newsock);
+	retval = sock_map_fd(newsock, 0);
 	if (retval < 0) {
 		sock_release(newsock);
 		goto out;
diff --git a/net/socket.c b/net/socket.c
index 1ba57d88898..64601f90035 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -349,11 +349,11 @@ static struct dentry_operations sockfs_dentry_operations = {
  *	but we take care of internal coherence yet.
  */
 
-static int sock_alloc_fd(struct file **filep)
+static int sock_alloc_fd(struct file **filep, int flags)
 {
 	int fd;
 
-	fd = get_unused_fd();
+	fd = get_unused_fd_flags(flags);
 	if (likely(fd >= 0)) {
 		struct file *file = get_empty_filp();
 
@@ -396,10 +396,10 @@ static int sock_attach_fd(struct socket *sock, struct file *file)
 	return 0;
 }
 
-int sock_map_fd(struct socket *sock)
+int sock_map_fd(struct socket *sock, int flags)
 {
 	struct file *newfile;
-	int fd = sock_alloc_fd(&newfile);
+	int fd = sock_alloc_fd(&newfile, flags);
 
 	if (likely(fd >= 0)) {
 		int err = sock_attach_fd(sock, newfile);
@@ -1218,12 +1218,18 @@ asmlinkage long sys_socket(int family, int type, int protocol)
 {
 	int retval;
 	struct socket *sock;
+	int flags;
+
+	flags = type & ~SOCK_TYPE_MASK;
+	if (flags & ~SOCK_CLOEXEC)
+		return -EINVAL;
+	type &= SOCK_TYPE_MASK;
 
 	retval = sock_create(family, type, protocol, &sock);
 	if (retval < 0)
 		goto out;
 
-	retval = sock_map_fd(sock);
+	retval = sock_map_fd(sock, flags & O_CLOEXEC);
 	if (retval < 0)
 		goto out_release;
 
@@ -1246,6 +1252,12 @@ asmlinkage long sys_socketpair(int family, int type, int protocol,
 	struct socket *sock1, *sock2;
 	int fd1, fd2, err;
 	struct file *newfile1, *newfile2;
+	int flags;
+
+	flags = type & ~SOCK_TYPE_MASK;
+	if (flags & ~SOCK_CLOEXEC)
+		return -EINVAL;
+	type &= SOCK_TYPE_MASK;
 
 	/*
 	 * Obtain the first socket and check if the underlying protocol
@@ -1264,13 +1276,13 @@ asmlinkage long sys_socketpair(int family, int type, int protocol,
 	if (err < 0)
 		goto out_release_both;
 
-	fd1 = sock_alloc_fd(&newfile1);
+	fd1 = sock_alloc_fd(&newfile1, flags & O_CLOEXEC);
 	if (unlikely(fd1 < 0)) {
 		err = fd1;
 		goto out_release_both;
 	}
 
-	fd2 = sock_alloc_fd(&newfile2);
+	fd2 = sock_alloc_fd(&newfile2, flags & O_CLOEXEC);
 	if (unlikely(fd2 < 0)) {
 		err = fd2;
 		put_filp(newfile1);
@@ -1426,7 +1438,7 @@ asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
 	 */
 	__module_get(newsock->ops->owner);
 
-	newfd = sock_alloc_fd(&newfile);
+	newfd = sock_alloc_fd(&newfile, 0);
 	if (unlikely(newfd < 0)) {
 		err = newfd;
 		sock_release(newsock);
-- 
cgit v1.2.3


From aaca0bdca573f3f51ea03139f9c7289541e7bca3 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:20 -0700
Subject: flag parameters: paccept

This patch is by far the most complex in the series.  It adds a new syscall
paccept.  This syscall differs from accept in that it adds (at the userlevel)
two additional parameters:

- a signal mask
- a flags value

The flags parameter can be used to set flag like SOCK_CLOEXEC.  This is
imlpemented here as well.  Some people argued that this is a property which
should be inherited from the file desriptor for the server but this is against
POSIX.  Additionally, we really want the signal mask parameter as well
(similar to pselect, ppoll, etc).  So an interface change in inevitable.

The flag value is the same as for socket and socketpair.  I think diverging
here will only create confusion.  Similar to the filesystem interfaces where
the use of the O_* constants differs, it is acceptable here.

The signal mask is handled as for pselect etc.  The mask is temporarily
installed for the thread and removed before the call returns.  I modeled the
code after pselect.  If there is a problem it's likely also in pselect.

For architectures which use socketcall I maintained this interface instead of
adding a system call.  The symmetry shouldn't be broken.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <sys/syscall.h>

#ifndef __NR_paccept
# ifdef __x86_64__
#  define __NR_paccept 288
# elif defined __i386__
#  define SYS_PACCEPT 18
#  define USE_SOCKETCALL 1
# else
#  error "need __NR_paccept"
# endif
#endif

#ifdef USE_SOCKETCALL
# define paccept(fd, addr, addrlen, mask, flags) \
  ({ long args[6] = { \
       (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \
     syscall (__NR_socketcall, SYS_PACCEPT, args); })
#else
# define paccept(fd, addr, addrlen, mask, flags) \
  syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags)
#endif

#define PORT 57392

#define SOCK_CLOEXEC O_CLOEXEC

static pthread_barrier_t b;

static void *
tf (void *arg)
{
  pthread_barrier_wait (&b);
  int s = socket (AF_INET, SOCK_STREAM, 0);
  struct sockaddr_in sin;
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);

  pthread_barrier_wait (&b);
  s = socket (AF_INET, SOCK_STREAM, 0);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);
  pthread_barrier_wait (&b);

  pthread_barrier_wait (&b);
  sleep (2);
  pthread_kill ((pthread_t) arg, SIGUSR1);

  return NULL;
}

static void
handler (int s)
{
}

int
main (void)
{
  pthread_barrier_init (&b, NULL, 2);

  struct sockaddr_in sin;
  pthread_t th;
  if (pthread_create (&th, NULL, tf, (void *) pthread_self ()) != 0)
    {
      puts ("pthread_create failed");
      return 1;
    }

  int s = socket (AF_INET, SOCK_STREAM, 0);
  int reuse = 1;
  setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  bind (s, (struct sockaddr *) &sin, sizeof (sin));
  listen (s, SOMAXCONN);

  pthread_barrier_wait (&b);

  int s2 = paccept (s, NULL, 0, NULL, 0);
  if (s2 < 0)
    {
      puts ("paccept(0) failed");
      return 1;
    }

  int coe = fcntl (s2, F_GETFD);
  if (coe & FD_CLOEXEC)
    {
      puts ("paccept(0) set close-on-exec-flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  s2 = paccept (s, NULL, 0, NULL, SOCK_CLOEXEC);
  if (s2 < 0)
    {
      puts ("paccept(SOCK_CLOEXEC) failed");
      return 1;
    }

  coe = fcntl (s2, F_GETFD);
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("paccept(SOCK_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  struct sigaction sa;
  sa.sa_handler = handler;
  sa.sa_flags = 0;
  sigemptyset (&sa.sa_mask);
  sigaction (SIGUSR1, &sa, NULL);

  sigset_t ss;
  pthread_sigmask (SIG_SETMASK, NULL, &ss);
  sigaddset (&ss, SIGUSR1);
  pthread_sigmask (SIG_SETMASK, &ss, NULL);

  sigdelset (&ss, SIGUSR1);
  alarm (4);
  pthread_barrier_wait (&b);

  errno = 0 ;
  s2 = paccept (s, NULL, 0, &ss, 0);
  if (s2 != -1 || errno != EINTR)
    {
      puts ("paccept did not fail with EINTR");
      return 1;
    }

  close (s);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: make it compile]
[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Roland McGrath <roland@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-alpha/socket.h  |  5 +++
 include/asm-parisc/socket.h |  5 +++
 include/asm-x86/unistd_64.h |  2 ++
 include/linux/net.h         |  3 ++
 include/linux/syscalls.h    |  2 ++
 kernel/sys_ni.c             |  1 +
 net/compat.c                | 52 ++++++++++++++++++++++++++---
 net/socket.c                | 81 ++++++++++++++++++++++++++++++++++++++++-----
 8 files changed, 139 insertions(+), 12 deletions(-)

diff --git a/include/asm-alpha/socket.h b/include/asm-alpha/socket.h
index 08c97931992..a1057c2d95e 100644
--- a/include/asm-alpha/socket.h
+++ b/include/asm-alpha/socket.h
@@ -62,4 +62,9 @@
 
 #define SO_MARK			36
 
+/* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
+ * have to define SOCK_NONBLOCK to a different value here.
+ */
+#define SOCK_NONBLOCK	0x40000000
+
 #endif /* _ASM_SOCKET_H */
diff --git a/include/asm-parisc/socket.h b/include/asm-parisc/socket.h
index 69a7a0d30b0..fba402c95ac 100644
--- a/include/asm-parisc/socket.h
+++ b/include/asm-parisc/socket.h
@@ -54,4 +54,9 @@
 
 #define SO_MARK			0x401f
 
+/* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
+ * have to define SOCK_NONBLOCK to a different value here.
+ */
+#define SOCK_NONBLOCK   0x40000000
+
 #endif /* _ASM_SOCKET_H */
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index 9c1a4a3470d..e323994a370 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -639,6 +639,8 @@ __SYSCALL(__NR_fallocate, sys_fallocate)
 __SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
 #define __NR_timerfd_gettime			287
 __SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
+#define __NR_paccept				288
+__SYSCALL(__NR_paccept, sys_paccept)
 
 
 #ifndef __NO_STUBS
diff --git a/include/linux/net.h b/include/linux/net.h
index 8b5383c45b4..3a9b06d4d0f 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -47,6 +47,7 @@ struct net;
 #define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
 #define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
 #define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
+#define SYS_PACCEPT	18		/* sys_paccept(2)		*/
 
 typedef enum {
 	SS_FREE = 0,			/* not allocated		*/
@@ -219,6 +220,8 @@ extern int 	     sock_map_fd(struct socket *sock, int flags);
 extern struct socket *sockfd_lookup(int fd, int *err);
 #define		     sockfd_put(sock) fput(sock->file)
 extern int	     net_ratelimit(void);
+extern long	     do_accept(int fd, struct sockaddr __user *upeer_sockaddr,
+			       int __user *upeer_addrlen, int flags);
 
 #define net_random()		random32()
 #define net_srandom(seed)	srandom32((__force u32)seed)
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 4394dadff81..2a2a40af6b2 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -409,6 +409,8 @@ asmlinkage long sys_getsockopt(int fd, int level, int optname,
 asmlinkage long sys_bind(int, struct sockaddr __user *, int);
 asmlinkage long sys_connect(int, struct sockaddr __user *, int);
 asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *);
+asmlinkage long sys_paccept(int, struct sockaddr __user *, int __user *,
+			    const sigset_t *, size_t, int);
 asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_send(int, void __user *, size_t, unsigned);
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 0fea0ee12da..2f0b8a2e600 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -31,6 +31,7 @@ cond_syscall(sys_socketpair);
 cond_syscall(sys_bind);
 cond_syscall(sys_listen);
 cond_syscall(sys_accept);
+cond_syscall(sys_paccept);
 cond_syscall(sys_connect);
 cond_syscall(sys_getsockname);
 cond_syscall(sys_getpeername);
diff --git a/net/compat.c b/net/compat.c
index 6e1b03b5193..67fb6a3834a 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -722,9 +722,10 @@ EXPORT_SYMBOL(compat_mc_getsockopt);
 
 /* Argument list sizes for compat_sys_socketcall */
 #define AL(x) ((x) * sizeof(u32))
-static unsigned char nas[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
+static unsigned char nas[19]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
 				AL(3),AL(3),AL(4),AL(4),AL(4),AL(6),
-				AL(6),AL(2),AL(5),AL(5),AL(3),AL(3)};
+				AL(6),AL(2),AL(5),AL(5),AL(3),AL(3),
+				AL(6)};
 #undef AL
 
 asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned flags)
@@ -737,13 +738,52 @@ asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, uns
 	return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
 }
 
+asmlinkage long compat_sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
+				   int __user *upeer_addrlen,
+				   const compat_sigset_t __user *sigmask,
+				   compat_size_t sigsetsize, int flags)
+{
+	compat_sigset_t ss32;
+	sigset_t ksigmask, sigsaved;
+	int ret;
+
+	if (sigmask) {
+		if (sigsetsize != sizeof(compat_sigset_t))
+			return -EINVAL;
+		if (copy_from_user(&ss32, sigmask, sizeof(ss32)))
+			return -EFAULT;
+		sigset_from_compat(&ksigmask, &ss32);
+
+		sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP));
+		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
+	}
+
+	ret = do_accept(fd, upeer_sockaddr, upeer_addrlen, flags);
+
+	if (ret == -ERESTARTNOHAND) {
+		/*
+		 * Don't restore the signal mask yet. Let do_signal() deliver
+		 * the signal on the way back to userspace, before the signal
+		 * mask is restored.
+		 */
+		if (sigmask) {
+			memcpy(&current->saved_sigmask, &sigsaved,
+			       sizeof(sigsaved));
+			set_restore_sigmask();
+		}
+	} else if (sigmask)
+		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
+
+	return ret;
+}
+
 asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
 {
 	int ret;
 	u32 a[6];
 	u32 a0, a1;
 
-	if (call < SYS_SOCKET || call > SYS_RECVMSG)
+	if (call < SYS_SOCKET || call > SYS_PACCEPT)
 		return -EINVAL;
 	if (copy_from_user(a, args, nas[call]))
 		return -EFAULT;
@@ -764,7 +804,7 @@ asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
 		ret = sys_listen(a0, a1);
 		break;
 	case SYS_ACCEPT:
-		ret = sys_accept(a0, compat_ptr(a1), compat_ptr(a[2]));
+		ret = do_accept(a0, compat_ptr(a1), compat_ptr(a[2]), 0);
 		break;
 	case SYS_GETSOCKNAME:
 		ret = sys_getsockname(a0, compat_ptr(a1), compat_ptr(a[2]));
@@ -804,6 +844,10 @@ asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
 	case SYS_RECVMSG:
 		ret = compat_sys_recvmsg(a0, compat_ptr(a1), a[2]);
 		break;
+	case SYS_PACCEPT:
+		ret = compat_sys_paccept(a0, compat_ptr(a1), compat_ptr(a[2]),
+					 compat_ptr(a[3]), a[4], a[5]);
+		break;
 	default:
 		ret = -EINVAL;
 		break;
diff --git a/net/socket.c b/net/socket.c
index 64601f90035..a0ce8ad7225 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -63,6 +63,7 @@
 #include <linux/file.h>
 #include <linux/net.h>
 #include <linux/interrupt.h>
+#include <linux/thread_info.h>
 #include <linux/rcupdate.h>
 #include <linux/netdevice.h>
 #include <linux/proc_fs.h>
@@ -1225,6 +1226,9 @@ asmlinkage long sys_socket(int family, int type, int protocol)
 		return -EINVAL;
 	type &= SOCK_TYPE_MASK;
 
+	if (SOCK_NONBLOCK != O_NONBLOCK && (flags & SOCK_NONBLOCK))
+		flags = (flags & ~SOCK_NONBLOCK) | O_NONBLOCK;
+
 	retval = sock_create(family, type, protocol, &sock);
 	if (retval < 0)
 		goto out;
@@ -1259,6 +1263,9 @@ asmlinkage long sys_socketpair(int family, int type, int protocol,
 		return -EINVAL;
 	type &= SOCK_TYPE_MASK;
 
+	if (SOCK_NONBLOCK != O_NONBLOCK && (flags & SOCK_NONBLOCK))
+		flags = (flags & ~SOCK_NONBLOCK) | O_NONBLOCK;
+
 	/*
 	 * Obtain the first socket and check if the underlying protocol
 	 * supports the socketpair call.
@@ -1413,14 +1420,20 @@ asmlinkage long sys_listen(int fd, int backlog)
  *	clean when we restucture accept also.
  */
 
-asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
-			   int __user *upeer_addrlen)
+long do_accept(int fd, struct sockaddr __user *upeer_sockaddr,
+	       int __user *upeer_addrlen, int flags)
 {
 	struct socket *sock, *newsock;
 	struct file *newfile;
 	int err, len, newfd, fput_needed;
 	struct sockaddr_storage address;
 
+	if (flags & ~SOCK_CLOEXEC)
+		return -EINVAL;
+
+	if (SOCK_NONBLOCK != O_NONBLOCK && (flags & SOCK_NONBLOCK))
+		flags = (flags & ~SOCK_NONBLOCK) | O_NONBLOCK;
+
 	sock = sockfd_lookup_light(fd, &err, &fput_needed);
 	if (!sock)
 		goto out;
@@ -1438,7 +1451,7 @@ asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
 	 */
 	__module_get(newsock->ops->owner);
 
-	newfd = sock_alloc_fd(&newfile, 0);
+	newfd = sock_alloc_fd(&newfile, flags & O_CLOEXEC);
 	if (unlikely(newfd < 0)) {
 		err = newfd;
 		sock_release(newsock);
@@ -1491,6 +1504,50 @@ out_fd:
 	goto out_put;
 }
 
+asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
+			    int __user *upeer_addrlen,
+			    const sigset_t __user *sigmask,
+			    size_t sigsetsize, int flags)
+{
+	sigset_t ksigmask, sigsaved;
+	int ret;
+
+	if (sigmask) {
+		/* XXX: Don't preclude handling different sized sigset_t's.  */
+		if (sigsetsize != sizeof(sigset_t))
+			return -EINVAL;
+		if (copy_from_user(&ksigmask, sigmask, sizeof(ksigmask)))
+			return -EFAULT;
+
+		sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP));
+		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
+        }
+
+	ret = do_accept(fd, upeer_sockaddr, upeer_addrlen, flags);
+
+	if (ret < 0 && signal_pending(current)) {
+		/*
+		 * Don't restore the signal mask yet. Let do_signal() deliver
+		 * the signal on the way back to userspace, before the signal
+		 * mask is restored.
+		 */
+		if (sigmask) {
+			memcpy(&current->saved_sigmask, &sigsaved,
+			       sizeof(sigsaved));
+			set_restore_sigmask();
+		}
+	} else if (sigmask)
+		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
+
+	return ret;
+}
+
+asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
+			   int __user *upeer_addrlen)
+{
+	return do_accept(fd, upeer_sockaddr, upeer_addrlen, 0);
+}
+
 /*
  *	Attempt to connect to a socket with the server address.  The address
  *	is in user space so we verify it is OK and move it to kernel space.
@@ -2011,10 +2068,11 @@ out:
 
 /* Argument list sizes for sys_socketcall */
 #define AL(x) ((x) * sizeof(unsigned long))
-static const unsigned char nargs[18]={
+static const unsigned char nargs[19]={
 	AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
 	AL(3),AL(3),AL(4),AL(4),AL(4),AL(6),
-	AL(6),AL(2),AL(5),AL(5),AL(3),AL(3)
+	AL(6),AL(2),AL(5),AL(5),AL(3),AL(3),
+	AL(6)
 };
 
 #undef AL
@@ -2033,7 +2091,7 @@ asmlinkage long sys_socketcall(int call, unsigned long __user *args)
 	unsigned long a0, a1;
 	int err;
 
-	if (call < 1 || call > SYS_RECVMSG)
+	if (call < 1 || call > SYS_PACCEPT)
 		return -EINVAL;
 
 	/* copy_from_user should be SMP safe. */
@@ -2062,8 +2120,8 @@ asmlinkage long sys_socketcall(int call, unsigned long __user *args)
 		break;
 	case SYS_ACCEPT:
 		err =
-		    sys_accept(a0, (struct sockaddr __user *)a1,
-			       (int __user *)a[2]);
+		    do_accept(a0, (struct sockaddr __user *)a1,
+			      (int __user *)a[2], 0);
 		break;
 	case SYS_GETSOCKNAME:
 		err =
@@ -2110,6 +2168,13 @@ asmlinkage long sys_socketcall(int call, unsigned long __user *args)
 	case SYS_RECVMSG:
 		err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]);
 		break;
+	case SYS_PACCEPT:
+		err =
+		    sys_paccept(a0, (struct sockaddr __user *)a1,
+			        (int __user *)a[2],
+				(const sigset_t __user *) a[3],
+				a[4], a[5]);
+		break;
 	default:
 		err = -EINVAL;
 		break;
-- 
cgit v1.2.3


From c019bbc612f6633ede7ed67725cbf68de45ae8a4 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:21 -0700
Subject: flag parameters: paccept w/out set_restore_sigmask

Some platforms do not have support to restore the signal mask in the
return path from a syscall.  For those platforms syscalls like pselect are
not defined at all.  This is, I think, not a good choice for paccept()
since paccept() adds more value on top of accept() than just the signal
mask handling.

Therefore this patch defines a scaled down version of the sys_paccept
function for those platforms.  It returns -EINVAL in case the signal mask
is non-NULL but behaves the same otherwise.

Note that I explicitly included <linux/thread_info.h>.  I saw that it is
currently included but indirectly two levels down.  There is too much risk
in relying on this.  The header might change and then suddenly the
function definition would change without anyone immediately noticing.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/net.h |  3 +++
 net/socket.c        | 17 +++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/include/linux/net.h b/include/linux/net.h
index 3a9b06d4d0f..39a23af059b 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -102,6 +102,9 @@ enum sock_type {
 
 /* Flags for socket, socketpair, paccept */
 #define SOCK_CLOEXEC	O_CLOEXEC
+#ifndef SOCK_NONBLOCK
+#define SOCK_NONBLOCK	O_NONBLOCK
+#endif
 
 #endif /* ARCH_HAS_SOCKET_TYPES */
 
diff --git a/net/socket.c b/net/socket.c
index a0ce8ad7225..d163adff95b 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -69,6 +69,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/mutex.h>
+#include <linux/thread_info.h>
 #include <linux/wanrouter.h>
 #include <linux/if_bridge.h>
 #include <linux/if_frad.h>
@@ -1504,6 +1505,7 @@ out_fd:
 	goto out_put;
 }
 
+#ifdef HAVE_SET_RESTORE_SIGMASK
 asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
 			    int __user *upeer_addrlen,
 			    const sigset_t __user *sigmask,
@@ -1541,6 +1543,21 @@ asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
 
 	return ret;
 }
+#else
+asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
+			    int __user *upeer_addrlen,
+			    const sigset_t __user *sigmask,
+			    size_t sigsetsize, int flags)
+{
+	/* The platform does not support restoring the signal mask in the
+	 * return path.  So we do not allow using paccept() with a signal
+	 * mask.  */
+	if (sigmask)
+		return -EINVAL;
+
+	return do_accept(fd, upeer_sockaddr, upeer_addrlen, flags);
+}
+#endif
 
 asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
 			   int __user *upeer_addrlen)
-- 
cgit v1.2.3


From 7d9dbca34240ebb6ff88d8a29c6c7bffd098f0c1 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:22 -0700
Subject: flag parameters: anon_inode_getfd extension

This patch just extends the anon_inode_getfd interface to take an additional
parameter with a flag value.  The flag value is passed on to
get_unused_fd_flags in anticipation for a use with the O_CLOEXEC flag.

No actual semantic changes here, the changed callers all pass 0 for now.

[akpm@linux-foundation.org: KVM fix]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/anon_inodes.c            | 9 +++++----
 fs/eventfd.c                | 2 +-
 fs/eventpoll.c              | 2 +-
 fs/signalfd.c               | 3 ++-
 fs/timerfd.c                | 2 +-
 include/linux/anon_inodes.h | 2 +-
 virt/kvm/kvm_main.c         | 4 ++--
 7 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index 977ef208c05..1a4eee620b0 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -58,8 +58,9 @@ static struct dentry_operations anon_inodefs_dentry_operations = {
  *                    of the file
  *
  * @name:    [in]    name of the "class" of the new file
- * @fops     [in]    file operations for the new file
- * @priv     [in]    private data for the new file (will be file's private_data)
+ * @fops:    [in]    file operations for the new file
+ * @priv:    [in]    private data for the new file (will be file's private_data)
+ * @flags:   [in]    flags
  *
  * Creates a new file by hooking it on a single inode. This is useful for files
  * that do not need to have a full-fledged inode in order to operate correctly.
@@ -68,7 +69,7 @@ static struct dentry_operations anon_inodefs_dentry_operations = {
  * setup.  Returns new descriptor or -error.
  */
 int anon_inode_getfd(const char *name, const struct file_operations *fops,
-		     void *priv)
+		     void *priv, int flags)
 {
 	struct qstr this;
 	struct dentry *dentry;
@@ -78,7 +79,7 @@ int anon_inode_getfd(const char *name, const struct file_operations *fops,
 	if (IS_ERR(anon_inode_inode))
 		return -ENODEV;
 
-	error = get_unused_fd();
+	error = get_unused_fd_flags(flags);
 	if (error < 0)
 		return error;
 	fd = error;
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 343942deeec..6094265ca40 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -214,7 +214,7 @@ asmlinkage long sys_eventfd(unsigned int count)
 	 * When we call this, the initialization must be complete, since
 	 * anon_inode_getfd() will install the fd.
 	 */
-	fd = anon_inode_getfd("[eventfd]", &eventfd_fops, ctx);
+	fd = anon_inode_getfd("[eventfd]", &eventfd_fops, ctx, 0);
 	if (fd < 0)
 		kfree(ctx);
 	return fd;
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 990c01d2d66..9392dd96812 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1068,7 +1068,7 @@ asmlinkage long sys_epoll_create(int size)
 	 * Creates all the items needed to setup an eventpoll file. That is,
 	 * a file structure and a free file descriptor.
 	 */
-	fd = anon_inode_getfd("[eventpoll]", &eventpoll_fops, ep);
+	fd = anon_inode_getfd("[eventpoll]", &eventpoll_fops, ep, 0);
 	if (fd < 0)
 		ep_free(ep);
 
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 619725644c7..ddb328b74bd 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -227,7 +227,8 @@ asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemas
 		 * When we call this, the initialization must be complete, since
 		 * anon_inode_getfd() will install the fd.
 		 */
-		ufd = anon_inode_getfd("[signalfd]", &signalfd_fops, ctx);
+		ufd = anon_inode_getfd("[signalfd]", &signalfd_fops, ctx,
+				       0);
 		if (ufd < 0)
 			kfree(ctx);
 	} else {
diff --git a/fs/timerfd.c b/fs/timerfd.c
index d87d354ec42..77c2bc92cbe 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -198,7 +198,7 @@ asmlinkage long sys_timerfd_create(int clockid, int flags)
 	ctx->clockid = clockid;
 	hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS);
 
-	ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx);
+	ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx, 0);
 	if (ufd < 0)
 		kfree(ctx);
 
diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h
index 6129e58ca7c..e0a0cdc2da4 100644
--- a/include/linux/anon_inodes.h
+++ b/include/linux/anon_inodes.h
@@ -9,7 +9,7 @@
 #define _LINUX_ANON_INODES_H
 
 int anon_inode_getfd(const char *name, const struct file_operations *fops,
-		     void *priv);
+		     void *priv, int flags);
 
 #endif /* _LINUX_ANON_INODES_H */
 
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 904d7b7bd78..a845890b680 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -902,7 +902,7 @@ static const struct file_operations kvm_vcpu_fops = {
  */
 static int create_vcpu_fd(struct kvm_vcpu *vcpu)
 {
-	int fd = anon_inode_getfd("kvm-vcpu", &kvm_vcpu_fops, vcpu);
+	int fd = anon_inode_getfd("kvm-vcpu", &kvm_vcpu_fops, vcpu, 0);
 	if (fd < 0)
 		kvm_put_kvm(vcpu->kvm);
 	return fd;
@@ -1261,7 +1261,7 @@ static int kvm_dev_ioctl_create_vm(void)
 	kvm = kvm_create_vm();
 	if (IS_ERR(kvm))
 		return PTR_ERR(kvm);
-	fd = anon_inode_getfd("kvm-vm", &kvm_vm_fops, kvm);
+	fd = anon_inode_getfd("kvm-vm", &kvm_vm_fops, kvm, 0);
 	if (fd < 0)
 		kvm_put_kvm(kvm);
 
-- 
cgit v1.2.3


From 9deb27baedb79759c3ab9435a7d8b841842d56e9 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:24 -0700
Subject: flag parameters: signalfd

This patch adds the new signalfd4 syscall.  It extends the old signalfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name SFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_signalfd4
# ifdef __x86_64__
#  define __NR_signalfd4 289
# elif defined __i386__
#  define __NR_signalfd4 327
# else
#  error "need __NR_signalfd4"
# endif
#endif

#define SFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  sigset_t ss;
  sigemptyset (&ss);
  sigaddset (&ss, SIGUSR1);
  int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
  if (fd == -1)
    {
      puts ("signalfd4(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("signalfd4(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("signalfd4(SFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/ia32/ia32entry.S          |  1 +
 arch/x86/kernel/syscall_table_32.S |  1 +
 fs/compat.c                        | 14 ++++++++++----
 fs/signalfd.c                      | 14 ++++++++++++--
 include/asm-x86/unistd_32.h        |  1 +
 include/asm-x86/unistd_64.h        |  2 ++
 include/linux/signalfd.h           |  5 +++++
 include/linux/syscalls.h           |  1 +
 kernel/sys_ni.c                    |  1 +
 9 files changed, 34 insertions(+), 6 deletions(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 021d71bc69b..c308128b925 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -826,4 +826,5 @@ ia32_sys_call_table:
 	.quad sys32_fallocate
 	.quad compat_sys_timerfd_settime	/* 325 */
 	.quad compat_sys_timerfd_gettime
+	.quad compat_sys_signalfd4
 ia32_syscall_end:
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index adff5562f5f..c12a36c9fd5 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -326,3 +326,4 @@ ENTRY(sys_call_table)
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
diff --git a/fs/compat.c b/fs/compat.c
index b4660428176..106eba28ec5 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -2131,9 +2131,9 @@ asmlinkage long compat_sys_epoll_pwait(int epfd,
 
 #ifdef CONFIG_SIGNALFD
 
-asmlinkage long compat_sys_signalfd(int ufd,
-				    const compat_sigset_t __user *sigmask,
-				    compat_size_t sigsetsize)
+asmlinkage long compat_sys_signalfd4(int ufd,
+				     const compat_sigset_t __user *sigmask,
+				     compat_size_t sigsetsize, int flags)
 {
 	compat_sigset_t ss32;
 	sigset_t tmp;
@@ -2148,9 +2148,15 @@ asmlinkage long compat_sys_signalfd(int ufd,
 	if (copy_to_user(ksigmask, &tmp, sizeof(sigset_t)))
 		return -EFAULT;
 
-	return sys_signalfd(ufd, ksigmask, sizeof(sigset_t));
+	return sys_signalfd4(ufd, ksigmask, sizeof(sigset_t), flags);
 }
 
+asmlinkage long compat_sys_signalfd(int ufd,
+				    const compat_sigset_t __user *sigmask,
+				    compat_size_t sigsetsize)
+{
+	return compat_sys_signalfd4(ufd, sigmask, sigsetsize, 0);
+}
 #endif /* CONFIG_SIGNALFD */
 
 #ifdef CONFIG_TIMERFD
diff --git a/fs/signalfd.c b/fs/signalfd.c
index ddb328b74bd..c8609fa51a1 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -205,11 +205,15 @@ static const struct file_operations signalfd_fops = {
 	.read		= signalfd_read,
 };
 
-asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask)
+asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask,
+			      size_t sizemask, int flags)
 {
 	sigset_t sigmask;
 	struct signalfd_ctx *ctx;
 
+	if (flags & ~SFD_CLOEXEC)
+		return -EINVAL;
+
 	if (sizemask != sizeof(sigset_t) ||
 	    copy_from_user(&sigmask, user_mask, sizeof(sigmask)))
 		return -EINVAL;
@@ -228,7 +232,7 @@ asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemas
 		 * anon_inode_getfd() will install the fd.
 		 */
 		ufd = anon_inode_getfd("[signalfd]", &signalfd_fops, ctx,
-				       0);
+				       flags & O_CLOEXEC);
 		if (ufd < 0)
 			kfree(ctx);
 	} else {
@@ -250,3 +254,9 @@ asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemas
 
 	return ufd;
 }
+
+asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask,
+			     size_t sizemask)
+{
+	return sys_signalfd4(ufd, user_mask, sizemask, 0);
+}
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index 8317d94771d..c310371f561 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -332,6 +332,7 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index e323994a370..e0a9b45b234 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -641,6 +641,8 @@ __SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
 __SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
 #define __NR_paccept				288
 __SYSCALL(__NR_paccept, sys_paccept)
+#define __NR_signalfd4				289
+__SYSCALL(__NR_signalfd4, sys_signalfd4)
 
 
 #ifndef __NO_STUBS
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index ea037f28df9..8b3f7b7420a 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -8,6 +8,11 @@
 #ifndef _LINUX_SIGNALFD_H
 #define _LINUX_SIGNALFD_H
 
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
+
+/* Flags for signalfd4.  */
+#define SFD_CLOEXEC O_CLOEXEC
 
 struct signalfd_siginfo {
 	__u32 ssi_signo;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 2a2a40af6b2..1c270779784 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -610,6 +610,7 @@ asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
 				    size_t len);
 asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, struct getcpu_cache __user *cache);
 asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask);
+asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask, size_t sizemask, int flags);
 asmlinkage long sys_timerfd_create(int clockid, int flags);
 asmlinkage long sys_timerfd_settime(int ufd, int flags,
 				    const struct itimerspec __user *utmr,
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 2f0b8a2e600..8627c89ae9e 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -156,6 +156,7 @@ cond_syscall(sys_ioprio_get);
 
 /* New file descriptors */
 cond_syscall(sys_signalfd);
+cond_syscall(sys_signalfd4);
 cond_syscall(compat_sys_signalfd);
 cond_syscall(sys_timerfd_create);
 cond_syscall(sys_timerfd_settime);
-- 
cgit v1.2.3


From b087498eb5605673b0f260a7620d91818cd72304 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:25 -0700
Subject: flag parameters: eventfd

This patch adds the new eventfd2 syscall.  It extends the old eventfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is EFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name EFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_eventfd2
# ifdef __x86_64__
#  define __NR_eventfd2 290
# elif defined __i386__
#  define __NR_eventfd2 328
# else
#  error "need __NR_eventfd2"
# endif
#endif

#define EFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_eventfd2, 1, 0);
  if (fd == -1)
    {
      puts ("eventfd2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("eventfd2(0) sets close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("eventfd2(EFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/ia32/ia32entry.S          |  1 +
 arch/x86/kernel/syscall_table_32.S |  1 +
 fs/eventfd.c                       | 13 +++++++++++--
 include/asm-x86/unistd_32.h        |  1 +
 include/asm-x86/unistd_64.h        |  2 ++
 include/linux/eventfd.h            |  6 ++++++
 include/linux/syscalls.h           |  1 +
 kernel/sys_ni.c                    |  1 +
 8 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index c308128b925..cf0eb31745c 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -827,4 +827,5 @@ ia32_sys_call_table:
 	.quad compat_sys_timerfd_settime	/* 325 */
 	.quad compat_sys_timerfd_gettime
 	.quad compat_sys_signalfd4
+	.quad sys_eventfd2
 ia32_syscall_end:
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index c12a36c9fd5..cf112cb11c3 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -327,3 +327,4 @@ ENTRY(sys_call_table)
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
 	.long sys_signalfd4
+	.long sys_eventfd2
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 6094265ca40..bd420e6478a 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -198,11 +198,14 @@ struct file *eventfd_fget(int fd)
 	return file;
 }
 
-asmlinkage long sys_eventfd(unsigned int count)
+asmlinkage long sys_eventfd2(unsigned int count, int flags)
 {
 	int fd;
 	struct eventfd_ctx *ctx;
 
+	if (flags & ~EFD_CLOEXEC)
+		return -EINVAL;
+
 	ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
@@ -214,9 +217,15 @@ asmlinkage long sys_eventfd(unsigned int count)
 	 * When we call this, the initialization must be complete, since
 	 * anon_inode_getfd() will install the fd.
 	 */
-	fd = anon_inode_getfd("[eventfd]", &eventfd_fops, ctx, 0);
+	fd = anon_inode_getfd("[eventfd]", &eventfd_fops, ctx,
+			      flags & O_CLOEXEC);
 	if (fd < 0)
 		kfree(ctx);
 	return fd;
 }
 
+asmlinkage long sys_eventfd(unsigned int count)
+{
+	return sys_eventfd2(count, 0);
+}
+
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index c310371f561..edbd8723c93 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -333,6 +333,7 @@
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
 #define __NR_signalfd4		327
+#define __NR_eventfd2		328
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index e0a9b45b234..fb059a6feeb 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -643,6 +643,8 @@ __SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
 __SYSCALL(__NR_paccept, sys_paccept)
 #define __NR_signalfd4				289
 __SYSCALL(__NR_signalfd4, sys_signalfd4)
+#define __NR_eventfd2				290
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
 
 
 #ifndef __NO_STUBS
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
index a701399b7fe..a6c0eaedb1b 100644
--- a/include/linux/eventfd.h
+++ b/include/linux/eventfd.h
@@ -10,6 +10,12 @@
 
 #ifdef CONFIG_EVENTFD
 
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
+
+/* Flags for eventfd2.  */
+#define EFD_CLOEXEC O_CLOEXEC
+
 struct file *eventfd_fget(int fd);
 int eventfd_signal(struct file *file, int n);
 
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 1c270779784..9ab09926a7f 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -617,6 +617,7 @@ asmlinkage long sys_timerfd_settime(int ufd, int flags,
 				    struct itimerspec __user *otmr);
 asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr);
 asmlinkage long sys_eventfd(unsigned int count);
+asmlinkage long sys_eventfd2(unsigned int count, int flags);
 asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);
 
 int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 8627c89ae9e..2a361ccdc7c 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -164,3 +164,4 @@ cond_syscall(sys_timerfd_gettime);
 cond_syscall(compat_sys_timerfd_settime);
 cond_syscall(compat_sys_timerfd_gettime);
 cond_syscall(sys_eventfd);
+cond_syscall(sys_eventfd2);
-- 
cgit v1.2.3


From 11fcb6c14676023d0bd437841f5dcd670e7990a0 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:26 -0700
Subject: flag parameters: timerfd_create

The timerfd_create syscall already has a flags parameter.  It just is
unused so far.  This patch changes this by introducing the TFD_CLOEXEC
flag to set the close-on-exec flag for the returned file descriptor.

A new name TFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_timerfd_create
# ifdef __x86_64__
#  define __NR_timerfd_create 283
# elif defined __i386__
#  define __NR_timerfd_create 322
# else
#  error "need __NR_timerfd_create"
# endif
#endif

#define TFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, 0);
  if (fd == -1)
    {
      puts ("timerfd_create(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("timerfd_create(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, TFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("timerfd_create(TFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("timerfd_create(TFD_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/timerfd.c            | 5 +++--
 include/linux/timerfd.h | 5 +++++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/fs/timerfd.c b/fs/timerfd.c
index 77c2bc92cbe..c6ef5e33cb3 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -184,7 +184,7 @@ asmlinkage long sys_timerfd_create(int clockid, int flags)
 	int ufd;
 	struct timerfd_ctx *ctx;
 
-	if (flags)
+	if (flags & ~TFD_CLOEXEC)
 		return -EINVAL;
 	if (clockid != CLOCK_MONOTONIC &&
 	    clockid != CLOCK_REALTIME)
@@ -198,7 +198,8 @@ asmlinkage long sys_timerfd_create(int clockid, int flags)
 	ctx->clockid = clockid;
 	hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS);
 
-	ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx, 0);
+	ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx,
+			       flags & O_CLOEXEC);
 	if (ufd < 0)
 		kfree(ctx);
 
diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h
index cf2b10d7573..96ed97dff00 100644
--- a/include/linux/timerfd.h
+++ b/include/linux/timerfd.h
@@ -8,9 +8,14 @@
 #ifndef _LINUX_TIMERFD_H
 #define _LINUX_TIMERFD_H
 
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
 
+/* Flags for timerfd_settime.  */
 #define TFD_TIMER_ABSTIME (1 << 0)
 
+/* Flags for timerfd_create.  */
+#define TFD_CLOEXEC O_CLOEXEC
 
 
 #endif /* _LINUX_TIMERFD_H */
-- 
cgit v1.2.3


From a0998b50c3f0b8fdd265c63e0032f86ebe377dbf Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:27 -0700
Subject: flag parameters: epoll_create

This patch adds the new epoll_create2 syscall.  It extends the old epoll_create
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is EPOLL_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name EPOLL_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_epoll_create2
# ifdef __x86_64__
#  define __NR_epoll_create2 291
# elif defined __i386__
#  define __NR_epoll_create2 329
# else
#  error "need __NR_epoll_create2"
# endif
#endif

#define EPOLL_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_epoll_create2, 1, 0);
  if (fd == -1)
    {
      puts ("epoll_create2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("epoll_create2(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_epoll_create2, 1, EPOLL_CLOEXEC);
  if (fd == -1)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/ia32/ia32entry.S          |  1 +
 arch/x86/kernel/syscall_table_32.S |  1 +
 fs/eventpoll.c                     | 13 +++++++++++--
 include/asm-x86/unistd_32.h        |  1 +
 include/asm-x86/unistd_64.h        |  2 ++
 include/linux/eventpoll.h          |  4 ++++
 include/linux/syscalls.h           |  1 +
 7 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index cf0eb31745c..04366f08f42 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -828,4 +828,5 @@ ia32_sys_call_table:
 	.quad compat_sys_timerfd_gettime
 	.quad compat_sys_signalfd4
 	.quad sys_eventfd2
+	.quad sys_epoll_create2
 ia32_syscall_end:
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index cf112cb11c3..4d7007ca263 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -328,3 +328,4 @@ ENTRY(sys_call_table)
 	.long sys_timerfd_gettime
 	.long sys_signalfd4
 	.long sys_eventfd2
+	.long sys_epoll_create2
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 9392dd96812..3fd4014f3c5 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1046,11 +1046,14 @@ retry:
  * RB tree. With the current implementation, the "size" parameter is ignored
  * (besides sanity checks).
  */
-asmlinkage long sys_epoll_create(int size)
+asmlinkage long sys_epoll_create2(int size, int flags)
 {
 	int error, fd = -1;
 	struct eventpoll *ep;
 
+	if (flags & ~EPOLL_CLOEXEC)
+		return -EINVAL;
+
 	DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d)\n",
 		     current, size));
 
@@ -1068,7 +1071,8 @@ asmlinkage long sys_epoll_create(int size)
 	 * Creates all the items needed to setup an eventpoll file. That is,
 	 * a file structure and a free file descriptor.
 	 */
-	fd = anon_inode_getfd("[eventpoll]", &eventpoll_fops, ep, 0);
+	fd = anon_inode_getfd("[eventpoll]", &eventpoll_fops, ep,
+			      flags & O_CLOEXEC);
 	if (fd < 0)
 		ep_free(ep);
 
@@ -1079,6 +1083,11 @@ error_return:
 	return fd;
 }
 
+asmlinkage long sys_epoll_create(int size)
+{
+	return sys_epoll_create2(size, 0);
+}
+
 /*
  * The following function implements the controller interface for
  * the eventpoll file that enables the insertion/removal/change of
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index edbd8723c93..a37d6b0c4e1 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -334,6 +334,7 @@
 #define __NR_timerfd_gettime	326
 #define __NR_signalfd4		327
 #define __NR_eventfd2		328
+#define __NR_epoll_create2	329
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index fb059a6feeb..a1a4a5b6e5e 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -645,6 +645,8 @@ __SYSCALL(__NR_paccept, sys_paccept)
 __SYSCALL(__NR_signalfd4, sys_signalfd4)
 #define __NR_eventfd2				290
 __SYSCALL(__NR_eventfd2, sys_eventfd2)
+#define __NR_epoll_create2			291
+__SYSCALL(__NR_epoll_create2, sys_epoll_create2)
 
 
 #ifndef __NO_STUBS
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index cf79853967f..1cfaa40059c 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -14,8 +14,12 @@
 #ifndef _LINUX_EVENTPOLL_H
 #define _LINUX_EVENTPOLL_H
 
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
 #include <linux/types.h>
 
+/* Flags for epoll_create2.  */
+#define EPOLL_CLOEXEC O_CLOEXEC
 
 /* Valid opcodes to issue to sys_epoll_ctl() */
 #define EPOLL_CTL_ADD 1
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 9ab09926a7f..85953240f28 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -430,6 +430,7 @@ asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
 asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			fd_set __user *exp, struct timeval __user *tvp);
 asmlinkage long sys_epoll_create(int size);
+asmlinkage long sys_epoll_create2(int size, int flags);
 asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
 				struct epoll_event __user *event);
 asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events,
-- 
cgit v1.2.3


From 336dd1f70ff62d7dd8655228caed4c5bfc818c56 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:29 -0700
Subject: flag parameters: dup2

This patch adds the new dup3 syscall.  It extends the old dup2 syscall by one
parameter which is meant to hold a flag value.  Support for the O_CLOEXEC flag
is added in this patch.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_dup3
# ifdef __x86_64__
#  define __NR_dup3 292
# elif defined __i386__
#  define __NR_dup3 330
# else
#  error "need __NR_dup3"
# endif
#endif

int
main (void)
{
  int fd = syscall (__NR_dup3, 1, 4, 0);
  if (fd == -1)
    {
      puts ("dup3(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("dup3(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_dup3, 1, 4, O_CLOEXEC);
  if (fd == -1)
    {
      puts ("dup3(O_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("dup3(O_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/ia32/ia32entry.S          |  1 +
 arch/x86/kernel/syscall_table_32.S |  1 +
 fs/fcntl.c                         | 15 +++++++++++++--
 include/asm-x86/unistd_32.h        |  1 +
 include/asm-x86/unistd_64.h        |  2 ++
 include/linux/syscalls.h           |  1 +
 6 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 04366f08f42..5614a8f7bed 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -829,4 +829,5 @@ ia32_sys_call_table:
 	.quad compat_sys_signalfd4
 	.quad sys_eventfd2
 	.quad sys_epoll_create2
+	.quad sys_dup3			/* 330 */
 ia32_syscall_end:
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 4d7007ca263..24a3f1ea6a0 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -329,3 +329,4 @@ ENTRY(sys_call_table)
 	.long sys_signalfd4
 	.long sys_eventfd2
 	.long sys_epoll_create2
+	.long sys_dup3			/* 330 */
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 330a7d78259..9679fcbdeaa 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -125,13 +125,16 @@ static int dupfd(struct file *file, unsigned int start, int cloexec)
 	return fd;
 }
 
-asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
+asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 {
 	int err = -EBADF;
 	struct file * file, *tofree;
 	struct files_struct * files = current->files;
 	struct fdtable *fdt;
 
+	if ((flags & ~O_CLOEXEC) != 0)
+		return -EINVAL;
+
 	spin_lock(&files->file_lock);
 	if (!(file = fcheck(oldfd)))
 		goto out_unlock;
@@ -163,7 +166,10 @@ asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
 
 	rcu_assign_pointer(fdt->fd[newfd], file);
 	FD_SET(newfd, fdt->open_fds);
-	FD_CLR(newfd, fdt->close_on_exec);
+	if (flags & O_CLOEXEC)
+		FD_SET(newfd, fdt->close_on_exec);
+	else
+		FD_CLR(newfd, fdt->close_on_exec);
 	spin_unlock(&files->file_lock);
 
 	if (tofree)
@@ -181,6 +187,11 @@ out_fput:
 	goto out;
 }
 
+asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
+{
+	return sys_dup3(oldfd, newfd, 0);
+}
+
 asmlinkage long sys_dup(unsigned int fildes)
 {
 	int ret = -EBADF;
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index a37d6b0c4e1..a1f6383bf69 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -335,6 +335,7 @@
 #define __NR_signalfd4		327
 #define __NR_eventfd2		328
 #define __NR_epoll_create2	329
+#define __NR_dup3		330
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index a1a4a5b6e5e..f0fb2bd40cd 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -647,6 +647,8 @@ __SYSCALL(__NR_signalfd4, sys_signalfd4)
 __SYSCALL(__NR_eventfd2, sys_eventfd2)
 #define __NR_epoll_create2			291
 __SYSCALL(__NR_epoll_create2, sys_epoll_create2)
+#define __NR_dup3				292
+__SYSCALL(__NR_dup3, sys_dup3)
 
 
 #ifndef __NO_STUBS
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 85953240f28..034d3358549 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -305,6 +305,7 @@ asmlinkage long sys_fcntl64(unsigned int fd,
 #endif
 asmlinkage long sys_dup(unsigned int fildes);
 asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
+asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags);
 asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int on);
 asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd,
 				unsigned long arg);
-- 
cgit v1.2.3


From ed8cae8ba01348bfd83333f4648dd807b04d7f08 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:30 -0700
Subject: flag parameters: pipe

This patch introduces the new syscall pipe2 which is like pipe but it also
takes an additional parameter which takes a flag value.  This patch implements
the handling of O_CLOEXEC for the flag.  I did not add support for the new
syscall for the architectures which have a special sys_pipe implementation.  I
think the maintainers of those archs have the chance to go with the unified
implementation but that's up to them.

The implementation introduces do_pipe_flags.  I did that instead of changing
all callers of do_pipe because some of the callers are written in assembler.
I would probably screw up changing the assembly code.  To avoid breaking code
do_pipe is now a small wrapper around do_pipe_flags.  Once all callers are
changed over to do_pipe_flags the old do_pipe function can be removed.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_pipe2
# ifdef __x86_64__
#  define __NR_pipe2 293
# elif defined __i386__
#  define __NR_pipe2 331
# else
#  error "need __NR_pipe2"
# endif
#endif

int
main (void)
{
  int fd[2];
  if (syscall (__NR_pipe2, fd, 0) != 0)
    {
      puts ("pipe2(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int coe = fcntl (fd[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (coe & FD_CLOEXEC)
        {
          printf ("pipe2(0) set close-on-exit for fd[%d]\n", i);
          return 1;
        }
    }
  close (fd[0]);
  close (fd[1]);

  if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0)
    {
      puts ("pipe2(O_CLOEXEC) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int coe = fcntl (fd[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((coe & FD_CLOEXEC) == 0)
        {
          printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i);
          return 1;
        }
    }
  close (fd[0]);
  close (fd[1]);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/ia32/sys_ia32.c          |  2 +-
 arch/ia64/kernel/sys_ia64.c        |  2 +-
 arch/mips/kernel/syscall.c         |  2 +-
 arch/parisc/hpux/sys_hpux.c        |  2 +-
 arch/sh/kernel/sys_sh32.c          |  2 +-
 arch/sparc/kernel/sys_sparc.c      |  2 +-
 arch/sparc64/kernel/sys_sparc.c    |  2 +-
 arch/x86/ia32/ia32entry.S          |  1 +
 arch/x86/ia32/sys_ia32.c           |  2 +-
 arch/x86/kernel/syscall_table_32.S |  1 +
 arch/xtensa/kernel/syscall.c       |  2 +-
 fs/pipe.c                          | 23 ++++++++++++++++++-----
 include/asm-x86/unistd_32.h        |  1 +
 include/asm-x86/unistd_64.h        |  2 ++
 include/linux/fs.h                 |  1 +
 15 files changed, 33 insertions(+), 14 deletions(-)

diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 7e028ceb93b..465116aecb8 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1139,7 +1139,7 @@ sys32_pipe (int __user *fd)
 	int retval;
 	int fds[2];
 
-	retval = do_pipe(fds);
+	retval = do_pipe_flags(fds, 0);
 	if (retval)
 		goto out;
 	if (copy_to_user(fd, fds, sizeof(fds)))
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index 1eda194b955..bcbb6d8792d 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -160,7 +160,7 @@ sys_pipe (void)
 	int fd[2];
 	int retval;
 
-	retval = do_pipe(fd);
+	retval = do_pipe_flags(fd, 0);
 	if (retval)
 		goto out;
 	retval = fd[0];
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 3523c8d12ed..343015a2f41 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -52,7 +52,7 @@ asmlinkage int sysm_pipe(nabi_no_regargs volatile struct pt_regs regs)
 	int fd[2];
 	int error, res;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error) {
 		res = error;
 		goto out;
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 0c5b9dabb47..be255ebb609 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -448,7 +448,7 @@ int hpux_pipe(int *kstack_fildes)
 	int error;
 
 	lock_kernel();
-	error = do_pipe(kstack_fildes);
+	error = do_pipe_flags(kstack_fildes, 0);
 	unlock_kernel();
 	return error;
 }
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
index 125e493ead8..f0aa5c39865 100644
--- a/arch/sh/kernel/sys_sh32.c
+++ b/arch/sh/kernel/sys_sh32.c
@@ -29,7 +29,7 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (!error) {
 		regs->regs[1] = fd[1];
 		return fd[0];
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index 3c6b49a53ae..4d73421559c 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -97,7 +97,7 @@ asmlinkage int sparc_pipe(struct pt_regs *regs)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error)
 		goto out;
 	regs->u_regs[UREG_I1] = fd[1];
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index e1f4eba2e57..39749e32dc7 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -418,7 +418,7 @@ asmlinkage long sparc_pipe(struct pt_regs *regs)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error)
 		goto out;
 	regs->u_regs[UREG_I1] = fd[1];
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 5614a8f7bed..18808b16457 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -830,4 +830,5 @@ ia32_sys_call_table:
 	.quad sys_eventfd2
 	.quad sys_epoll_create2
 	.quad sys_dup3			/* 330 */
+	.quad sys_pipe2
 ia32_syscall_end:
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index f00afdf61e6..d3c64088b98 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -238,7 +238,7 @@ asmlinkage long sys32_pipe(int __user *fd)
 	int retval;
 	int fds[2];
 
-	retval = do_pipe(fds);
+	retval = do_pipe_flags(fds, 0);
 	if (retval)
 		goto out;
 	if (copy_to_user(fd, fds, sizeof(fds)))
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 24a3f1ea6a0..66154769d52 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -330,3 +330,4 @@ ENTRY(sys_call_table)
 	.long sys_eventfd2
 	.long sys_epoll_create2
 	.long sys_dup3			/* 330 */
+	.long sys_pipe2
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index f3e16efcd47..ac15ecbdf91 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -49,7 +49,7 @@ asmlinkage long xtensa_pipe(int __user *userfds)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (!error) {
 		if (copy_to_user(userfds, fd, 2 * sizeof(int)))
 			error = -EFAULT;
diff --git a/fs/pipe.c b/fs/pipe.c
index 700f4e0d957..68e82061070 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1027,12 +1027,15 @@ struct file *create_read_pipe(struct file *wrf)
 	return f;
 }
 
-int do_pipe(int *fd)
+int do_pipe_flags(int *fd, int flags)
 {
 	struct file *fw, *fr;
 	int error;
 	int fdw, fdr;
 
+	if (flags & ~O_CLOEXEC)
+		return -EINVAL;
+
 	fw = create_write_pipe();
 	if (IS_ERR(fw))
 		return PTR_ERR(fw);
@@ -1041,12 +1044,12 @@ int do_pipe(int *fd)
 	if (IS_ERR(fr))
 		goto err_write_pipe;
 
-	error = get_unused_fd();
+	error = get_unused_fd_flags(flags);
 	if (error < 0)
 		goto err_read_pipe;
 	fdr = error;
 
-	error = get_unused_fd();
+	error = get_unused_fd_flags(flags);
 	if (error < 0)
 		goto err_fdr;
 	fdw = error;
@@ -1074,16 +1077,21 @@ int do_pipe(int *fd)
 	return error;
 }
 
+int do_pipe(int *fd)
+{
+	return do_pipe_flags(fd, 0);
+}
+
 /*
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way Unix traditionally does this, though.
  */
-asmlinkage long __weak sys_pipe(int __user *fildes)
+asmlinkage long __weak sys_pipe2(int __user *fildes, int flags)
 {
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, flags);
 	if (!error) {
 		if (copy_to_user(fildes, fd, sizeof(fd))) {
 			sys_close(fd[0]);
@@ -1094,6 +1102,11 @@ asmlinkage long __weak sys_pipe(int __user *fildes)
 	return error;
 }
 
+asmlinkage long __weak sys_pipe(int __user *fildes)
+{
+	return sys_pipe2(fildes, 0);
+}
+
 /*
  * pipefs should _never_ be mounted by userland - too much of security hassle,
  * no real gain from having the whole whorehouse mounted. So we don't need
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index a1f6383bf69..748a05c77da 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -336,6 +336,7 @@
 #define __NR_eventfd2		328
 #define __NR_epoll_create2	329
 #define __NR_dup3		330
+#define __NR_pipe2		331
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index f0fb2bd40cd..d2284b43ad5 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -649,6 +649,8 @@ __SYSCALL(__NR_eventfd2, sys_eventfd2)
 __SYSCALL(__NR_epoll_create2, sys_epoll_create2)
 #define __NR_dup3				292
 __SYSCALL(__NR_dup3, sys_dup3)
+#define __NR_pipe2				293
+__SYSCALL(__NR_pipe2, sys_pipe2)
 
 
 #ifndef __NO_STUBS
diff --git a/include/linux/fs.h b/include/linux/fs.h
index e5e6a244096..0e80cd717d3 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1777,6 +1777,7 @@ static inline void allow_write_access(struct file *file)
 		atomic_inc(&file->f_path.dentry->d_inode->i_writecount);
 }
 extern int do_pipe(int *);
+extern int do_pipe_flags(int *, int);
 extern struct file *create_read_pipe(struct file *f);
 extern struct file *create_write_pipe(void);
 extern void free_write_pipe(struct file *);
-- 
cgit v1.2.3


From 4006553b06306b34054529477b06b68a1c66249b Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:32 -0700
Subject: flag parameters: inotify_init

This patch introduces the new syscall inotify_init1 (note: the 1 stands for
the one parameter the syscall takes, as opposed to no parameter before).  The
values accepted for this parameter are function-specific and defined in the
inotify.h header.  Here the values must match the O_* flags, though.  In this
patch CLOEXEC support is introduced.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_inotify_init1
# ifdef __x86_64__
#  define __NR_inotify_init1 294
# elif defined __i386__
#  define __NR_inotify_init1 332
# else
#  error "need __NR_inotify_init1"
# endif
#endif

#define IN_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd;
  fd = syscall (__NR_inotify_init1, 0);
  if (fd == -1)
    {
      puts ("inotify_init1(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("inotify_init1(0) set close-on-exit");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_inotify_init1, IN_CLOEXEC);
  if (fd == -1)
    {
      puts ("inotify_init1(IN_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/ia32/ia32entry.S          |  1 +
 arch/x86/kernel/syscall_table_32.S |  1 +
 fs/inotify_user.c                  | 12 ++++++++++--
 include/asm-x86/unistd_32.h        |  1 +
 include/asm-x86/unistd_64.h        |  2 ++
 include/linux/inotify.h            |  5 +++++
 include/linux/syscalls.h           |  1 +
 kernel/sys_ni.c                    |  1 +
 8 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 18808b16457..4541073dd83 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -831,4 +831,5 @@ ia32_sys_call_table:
 	.quad sys_epoll_create2
 	.quad sys_dup3			/* 330 */
 	.quad sys_pipe2
+	.quad sys_inotify_init1
 ia32_syscall_end:
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 66154769d52..f59aba5ff0f 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -331,3 +331,4 @@ ENTRY(sys_call_table)
 	.long sys_epoll_create2
 	.long sys_dup3			/* 330 */
 	.long sys_pipe2
+	.long sys_inotify_init1
diff --git a/fs/inotify_user.c b/fs/inotify_user.c
index 6676c06bb7c..851005998cd 100644
--- a/fs/inotify_user.c
+++ b/fs/inotify_user.c
@@ -566,7 +566,7 @@ static const struct inotify_operations inotify_user_ops = {
 	.destroy_watch	= free_inotify_user_watch,
 };
 
-asmlinkage long sys_inotify_init(void)
+asmlinkage long sys_inotify_init1(int flags)
 {
 	struct inotify_device *dev;
 	struct inotify_handle *ih;
@@ -574,7 +574,10 @@ asmlinkage long sys_inotify_init(void)
 	struct file *filp;
 	int fd, ret;
 
-	fd = get_unused_fd();
+	if (flags & ~IN_CLOEXEC)
+		return -EINVAL;
+
+	fd = get_unused_fd_flags(flags & O_CLOEXEC);
 	if (fd < 0)
 		return fd;
 
@@ -638,6 +641,11 @@ out_put_fd:
 	return ret;
 }
 
+asmlinkage long sys_inotify_init(void)
+{
+	return sys_inotify_init1(0);
+}
+
 asmlinkage long sys_inotify_add_watch(int fd, const char __user *path, u32 mask)
 {
 	struct inode *inode;
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index 748a05c77da..b3daf503ab9 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -337,6 +337,7 @@
 #define __NR_epoll_create2	329
 #define __NR_dup3		330
 #define __NR_pipe2		331
+#define __NR_inotify_init1	332
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index d2284b43ad5..c8cb88d70c6 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -651,6 +651,8 @@ __SYSCALL(__NR_epoll_create2, sys_epoll_create2)
 __SYSCALL(__NR_dup3, sys_dup3)
 #define __NR_pipe2				293
 __SYSCALL(__NR_pipe2, sys_pipe2)
+#define __NR_inotify_init1			294
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
 
 
 #ifndef __NO_STUBS
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index 742b917e7d1..72ef8212051 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -7,6 +7,8 @@
 #ifndef _LINUX_INOTIFY_H
 #define _LINUX_INOTIFY_H
 
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
 #include <linux/types.h>
 
 /*
@@ -63,6 +65,9 @@ struct inotify_event {
 			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
 			 IN_MOVE_SELF)
 
+/* Flags for sys_inotify_init1.  */
+#define IN_CLOEXEC O_CLOEXEC
+
 #ifdef __KERNEL__
 
 #include <linux/dcache.h>
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 034d3358549..93a7e7f017a 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -547,6 +547,7 @@ asmlinkage long sys_get_mempolicy(int __user *policy,
 				unsigned long addr, unsigned long flags);
 
 asmlinkage long sys_inotify_init(void);
+asmlinkage long sys_inotify_init1(int flags);
 asmlinkage long sys_inotify_add_watch(int fd, const char __user *path,
 					u32 mask);
 asmlinkage long sys_inotify_rm_watch(int fd, u32 wd);
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 2a361ccdc7c..bd66ac5406f 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -96,6 +96,7 @@ cond_syscall(sys_keyctl);
 cond_syscall(compat_sys_keyctl);
 cond_syscall(compat_sys_socketcall);
 cond_syscall(sys_inotify_init);
+cond_syscall(sys_inotify_init1);
 cond_syscall(sys_inotify_add_watch);
 cond_syscall(sys_inotify_rm_watch);
 cond_syscall(sys_migrate_pages);
-- 
cgit v1.2.3


From 99829b832997d907c30669bfd17da32151e18f04 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:33 -0700
Subject: flag parameters: NONBLOCK in anon_inode_getfd

Building on the previous change to anon_inode_getfd, this patch introduces
support for handling of O_NONBLOCK in addition to the already supported
O_CLOEXEC.  Following patches will take advantage of this support.  As can be
seen, the additional support for supporting this functionality is minimal.

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/anon_inodes.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index 1a4eee620b0..3662dd44896 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -116,7 +116,7 @@ int anon_inode_getfd(const char *name, const struct file_operations *fops,
 	file->f_mapping = anon_inode_inode->i_mapping;
 
 	file->f_pos = 0;
-	file->f_flags = O_RDWR;
+	file->f_flags = O_RDWR | (flags & O_NONBLOCK);
 	file->f_version = 0;
 	file->private_data = priv;
 
-- 
cgit v1.2.3


From 77d2720059618b9b6e827a8b73831eb6c6fad63c Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:35 -0700
Subject: flag parameters: NONBLOCK in socket and socketpair

This patch introduces support for the SOCK_NONBLOCK flag in socket,
socketpair, and  paccept.  To do this the internal function sock_attach_fd
gets an additional parameter which it uses to set the appropriate flag for
the file descriptor.

Given that in modern, scalable programs almost all socket connections are
non-blocking and the minimal additional cost for the new functionality
I see no reason not to add this code.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <pthread.h>
#include <stdio.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <sys/syscall.h>

#ifndef __NR_paccept
# ifdef __x86_64__
#  define __NR_paccept 288
# elif defined __i386__
#  define SYS_PACCEPT 18
#  define USE_SOCKETCALL 1
# else
#  error "need __NR_paccept"
# endif
#endif

#ifdef USE_SOCKETCALL
# define paccept(fd, addr, addrlen, mask, flags) \
  ({ long args[6] = { \
       (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \
     syscall (__NR_socketcall, SYS_PACCEPT, args); })
#else
# define paccept(fd, addr, addrlen, mask, flags) \
  syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags)
#endif

#define PORT 57392

#define SOCK_NONBLOCK O_NONBLOCK

static pthread_barrier_t b;

static void *
tf (void *arg)
{
  pthread_barrier_wait (&b);
  int s = socket (AF_INET, SOCK_STREAM, 0);
  struct sockaddr_in sin;
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);
  pthread_barrier_wait (&b);

  pthread_barrier_wait (&b);
  s = socket (AF_INET, SOCK_STREAM, 0);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);
  pthread_barrier_wait (&b);

  return NULL;
}

int
main (void)
{
  int fd;
  fd = socket (PF_INET, SOCK_STREAM, 0);
  if (fd == -1)
    {
      puts ("socket(0) failed");
      return 1;
    }
  int fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (fl & O_NONBLOCK)
    {
      puts ("socket(0) set non-blocking mode");
      return 1;
    }
  close (fd);

  fd = socket (PF_INET, SOCK_STREAM|SOCK_NONBLOCK, 0);
  if (fd == -1)
    {
      puts ("socket(SOCK_NONBLOCK) failed");
      return 1;
    }
  fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((fl & O_NONBLOCK) == 0)
    {
      puts ("socket(SOCK_NONBLOCK) does not set non-blocking mode");
      return 1;
    }
  close (fd);

  int fds[2];
  if (socketpair (PF_UNIX, SOCK_STREAM, 0, fds) == -1)
    {
      puts ("socketpair(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      fl = fcntl (fds[i], F_GETFL);
      if (fl == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (fl & O_NONBLOCK)
        {
          printf ("socketpair(0) set non-blocking mode for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  if (socketpair (PF_UNIX, SOCK_STREAM|SOCK_NONBLOCK, 0, fds) == -1)
    {
      puts ("socketpair(SOCK_NONBLOCK) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      fl = fcntl (fds[i], F_GETFL);
      if (fl == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((fl & O_NONBLOCK) == 0)
        {
          printf ("socketpair(SOCK_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  pthread_barrier_init (&b, NULL, 2);

  struct sockaddr_in sin;
  pthread_t th;
  if (pthread_create (&th, NULL, tf, NULL) != 0)
    {
      puts ("pthread_create failed");
      return 1;
    }

  int s = socket (AF_INET, SOCK_STREAM, 0);
  int reuse = 1;
  setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  bind (s, (struct sockaddr *) &sin, sizeof (sin));
  listen (s, SOMAXCONN);

  pthread_barrier_wait (&b);

  int s2 = paccept (s, NULL, 0, NULL, 0);
  if (s2 < 0)
    {
      puts ("paccept(0) failed");
      return 1;
    }

  fl = fcntl (s2, F_GETFL);
  if (fl & O_NONBLOCK)
    {
      puts ("paccept(0) set non-blocking mode");
      return 1;
    }
  close (s2);
  close (s);

  pthread_barrier_wait (&b);

  s = socket (AF_INET, SOCK_STREAM, 0);
  sin.sin_port = htons (PORT);
  setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
  bind (s, (struct sockaddr *) &sin, sizeof (sin));
  listen (s, SOMAXCONN);

  pthread_barrier_wait (&b);

  s2 = paccept (s, NULL, 0, NULL, SOCK_NONBLOCK);
  if (s2 < 0)
    {
      puts ("paccept(SOCK_NONBLOCK) failed");
      return 1;
    }

  fl = fcntl (s2, F_GETFL);
  if ((fl & O_NONBLOCK) == 0)
    {
      puts ("paccept(SOCK_NONBLOCK) does not set non-blocking mode");
      return 1;
    }
  close (s2);
  close (s);

  pthread_barrier_wait (&b);
  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/net.h |  2 +-
 net/socket.c        | 20 ++++++++++----------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/include/linux/net.h b/include/linux/net.h
index 39a23af059b..2f999fbb188 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -20,7 +20,7 @@
 
 #include <linux/wait.h>
 #include <linux/socket.h>
-#include <linux/fcntl.h>	/* For O_CLOEXEC */
+#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
 #include <asm/socket.h>
 
 struct poll_table_struct;
diff --git a/net/socket.c b/net/socket.c
index d163adff95b..31105f9048a 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -369,7 +369,7 @@ static int sock_alloc_fd(struct file **filep, int flags)
 	return fd;
 }
 
-static int sock_attach_fd(struct socket *sock, struct file *file)
+static int sock_attach_fd(struct socket *sock, struct file *file, int flags)
 {
 	struct dentry *dentry;
 	struct qstr name = { .name = "" };
@@ -391,7 +391,7 @@ static int sock_attach_fd(struct socket *sock, struct file *file)
 	init_file(file, sock_mnt, dentry, FMODE_READ | FMODE_WRITE,
 		  &socket_file_ops);
 	SOCK_INODE(sock)->i_fop = &socket_file_ops;
-	file->f_flags = O_RDWR;
+	file->f_flags = O_RDWR | (flags & O_NONBLOCK);
 	file->f_pos = 0;
 	file->private_data = sock;
 
@@ -404,7 +404,7 @@ int sock_map_fd(struct socket *sock, int flags)
 	int fd = sock_alloc_fd(&newfile, flags);
 
 	if (likely(fd >= 0)) {
-		int err = sock_attach_fd(sock, newfile);
+		int err = sock_attach_fd(sock, newfile, flags);
 
 		if (unlikely(err < 0)) {
 			put_filp(newfile);
@@ -1223,7 +1223,7 @@ asmlinkage long sys_socket(int family, int type, int protocol)
 	int flags;
 
 	flags = type & ~SOCK_TYPE_MASK;
-	if (flags & ~SOCK_CLOEXEC)
+	if (flags & ~(SOCK_CLOEXEC | SOCK_NONBLOCK))
 		return -EINVAL;
 	type &= SOCK_TYPE_MASK;
 
@@ -1234,7 +1234,7 @@ asmlinkage long sys_socket(int family, int type, int protocol)
 	if (retval < 0)
 		goto out;
 
-	retval = sock_map_fd(sock, flags & O_CLOEXEC);
+	retval = sock_map_fd(sock, flags & (O_CLOEXEC | O_NONBLOCK));
 	if (retval < 0)
 		goto out_release;
 
@@ -1260,7 +1260,7 @@ asmlinkage long sys_socketpair(int family, int type, int protocol,
 	int flags;
 
 	flags = type & ~SOCK_TYPE_MASK;
-	if (flags & ~SOCK_CLOEXEC)
+	if (flags & ~(SOCK_CLOEXEC | SOCK_NONBLOCK))
 		return -EINVAL;
 	type &= SOCK_TYPE_MASK;
 
@@ -1298,12 +1298,12 @@ asmlinkage long sys_socketpair(int family, int type, int protocol,
 		goto out_release_both;
 	}
 
-	err = sock_attach_fd(sock1, newfile1);
+	err = sock_attach_fd(sock1, newfile1, flags & O_NONBLOCK);
 	if (unlikely(err < 0)) {
 		goto out_fd2;
 	}
 
-	err = sock_attach_fd(sock2, newfile2);
+	err = sock_attach_fd(sock2, newfile2, flags & O_NONBLOCK);
 	if (unlikely(err < 0)) {
 		fput(newfile1);
 		goto out_fd1;
@@ -1429,7 +1429,7 @@ long do_accept(int fd, struct sockaddr __user *upeer_sockaddr,
 	int err, len, newfd, fput_needed;
 	struct sockaddr_storage address;
 
-	if (flags & ~SOCK_CLOEXEC)
+	if (flags & ~(SOCK_CLOEXEC | SOCK_NONBLOCK))
 		return -EINVAL;
 
 	if (SOCK_NONBLOCK != O_NONBLOCK && (flags & SOCK_NONBLOCK))
@@ -1459,7 +1459,7 @@ long do_accept(int fd, struct sockaddr __user *upeer_sockaddr,
 		goto out_put;
 	}
 
-	err = sock_attach_fd(newsock, newfile);
+	err = sock_attach_fd(newsock, newfile, flags & O_NONBLOCK);
 	if (err < 0)
 		goto out_fd_simple;
 
-- 
cgit v1.2.3


From 5fb5e04926a54bc1c22bba7ca166840f4476196f Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:37 -0700
Subject: flag parameters: NONBLOCK in signalfd

This patch adds support for the SFD_NONBLOCK flag to signalfd4.  The
additional changes needed are minimal.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_signalfd4
# ifdef __x86_64__
#  define __NR_signalfd4 289
# elif defined __i386__
#  define __NR_signalfd4 327
# else
#  error "need __NR_signalfd4"
# endif
#endif

#define SFD_NONBLOCK O_NONBLOCK

int
main (void)
{
  sigset_t ss;
  sigemptyset (&ss);
  sigaddset (&ss, SIGUSR1);
  int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
  if (fd == -1)
    {
      puts ("signalfd4(0) failed");
      return 1;
    }
  int fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (fl & O_NONBLOCK)
    {
      puts ("signalfd4(0) set non-blocking mode");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_NONBLOCK);
  if (fd == -1)
    {
      puts ("signalfd4(SFD_NONBLOCK) failed");
      return 1;
    }
  fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((fl & O_NONBLOCK) == 0)
    {
      puts ("signalfd4(SFD_NONBLOCK) does not set non-blocking mode");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/signalfd.c            | 4 ++--
 include/linux/signalfd.h | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/signalfd.c b/fs/signalfd.c
index c8609fa51a1..5441a4bca77 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -211,7 +211,7 @@ asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask,
 	sigset_t sigmask;
 	struct signalfd_ctx *ctx;
 
-	if (flags & ~SFD_CLOEXEC)
+	if (flags & ~(SFD_CLOEXEC | SFD_NONBLOCK))
 		return -EINVAL;
 
 	if (sizemask != sizeof(sigset_t) ||
@@ -232,7 +232,7 @@ asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask,
 		 * anon_inode_getfd() will install the fd.
 		 */
 		ufd = anon_inode_getfd("[signalfd]", &signalfd_fops, ctx,
-				       flags & O_CLOEXEC);
+				       flags & (O_CLOEXEC | O_NONBLOCK));
 		if (ufd < 0)
 			kfree(ctx);
 	} else {
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index 8b3f7b7420a..bef0c46d471 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -8,11 +8,12 @@
 #ifndef _LINUX_SIGNALFD_H
 #define _LINUX_SIGNALFD_H
 
-/* For O_CLOEXEC */
+/* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/fcntl.h>
 
 /* Flags for signalfd4.  */
 #define SFD_CLOEXEC O_CLOEXEC
+#define SFD_NONBLOCK O_NONBLOCK
 
 struct signalfd_siginfo {
 	__u32 ssi_signo;
-- 
cgit v1.2.3


From e7d476dfdf0bcfed478a207aecfdc84f81efecaf Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:38 -0700
Subject: flag parameters: NONBLOCK in eventfd

This patch adds support for the EFD_NONBLOCK flag to eventfd2.  The
additional changes needed are minimal.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_eventfd2
# ifdef __x86_64__
#  define __NR_eventfd2 290
# elif defined __i386__
#  define __NR_eventfd2 328
# else
#  error "need __NR_eventfd2"
# endif
#endif

#define EFD_NONBLOCK O_NONBLOCK

int
main (void)
{
  int fd = syscall (__NR_eventfd2, 1, 0);
  if (fd == -1)
    {
      puts ("eventfd2(0) failed");
      return 1;
    }
  int fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (fl & O_NONBLOCK)
    {
      puts ("eventfd2(0) sets non-blocking mode");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_eventfd2, 1, EFD_NONBLOCK);
  if (fd == -1)
    {
      puts ("eventfd2(EFD_NONBLOCK) failed");
      return 1;
    }
  fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((fl & O_NONBLOCK) == 0)
    {
      puts ("eventfd2(EFD_NONBLOCK) does not set non-blocking mode");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/eventfd.c            | 4 ++--
 include/linux/eventfd.h | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/eventfd.c b/fs/eventfd.c
index bd420e6478a..3ed4466177a 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -203,7 +203,7 @@ asmlinkage long sys_eventfd2(unsigned int count, int flags)
 	int fd;
 	struct eventfd_ctx *ctx;
 
-	if (flags & ~EFD_CLOEXEC)
+	if (flags & ~(EFD_CLOEXEC | EFD_NONBLOCK))
 		return -EINVAL;
 
 	ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
@@ -218,7 +218,7 @@ asmlinkage long sys_eventfd2(unsigned int count, int flags)
 	 * anon_inode_getfd() will install the fd.
 	 */
 	fd = anon_inode_getfd("[eventfd]", &eventfd_fops, ctx,
-			      flags & O_CLOEXEC);
+			      flags & (O_CLOEXEC | O_NONBLOCK));
 	if (fd < 0)
 		kfree(ctx);
 	return fd;
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
index a6c0eaedb1b..a667637b54e 100644
--- a/include/linux/eventfd.h
+++ b/include/linux/eventfd.h
@@ -10,11 +10,12 @@
 
 #ifdef CONFIG_EVENTFD
 
-/* For O_CLOEXEC */
+/* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/fcntl.h>
 
 /* Flags for eventfd2.  */
 #define EFD_CLOEXEC O_CLOEXEC
+#define EFD_NONBLOCK O_NONBLOCK
 
 struct file *eventfd_fget(int fd);
 int eventfd_signal(struct file *file, int n);
-- 
cgit v1.2.3


From 6b1ef0e60d42f2fdaec26baee8327eb156347b4f Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:39 -0700
Subject: flag parameters: NONBLOCK in timerfd_create

This patch adds support for the TFD_NONBLOCK flag to timerfd_create.  The
additional changes needed are minimal.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_timerfd_create
# ifdef __x86_64__
#  define __NR_timerfd_create 283
# elif defined __i386__
#  define __NR_timerfd_create 322
# else
#  error "need __NR_timerfd_create"
# endif
#endif

#define TFD_NONBLOCK O_NONBLOCK

int
main (void)
{
  int fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, 0);
  if (fd == -1)
    {
      puts ("timerfd_create(0) failed");
      return 1;
    }
  int fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (fl & O_NONBLOCK)
    {
      puts ("timerfd_create(0) set non-blocking mode");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, TFD_NONBLOCK);
  if (fd == -1)
    {
      puts ("timerfd_create(TFD_NONBLOCK) failed");
      return 1;
    }
  fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((fl & O_NONBLOCK) == 0)
    {
      puts ("timerfd_create(TFD_NONBLOCK) set non-blocking mode");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/timerfd.c            | 4 ++--
 include/linux/timerfd.h | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/timerfd.c b/fs/timerfd.c
index c6ef5e33cb3..75d44efe346 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -184,7 +184,7 @@ asmlinkage long sys_timerfd_create(int clockid, int flags)
 	int ufd;
 	struct timerfd_ctx *ctx;
 
-	if (flags & ~TFD_CLOEXEC)
+	if (flags & ~(TFD_CLOEXEC | TFD_NONBLOCK))
 		return -EINVAL;
 	if (clockid != CLOCK_MONOTONIC &&
 	    clockid != CLOCK_REALTIME)
@@ -199,7 +199,7 @@ asmlinkage long sys_timerfd_create(int clockid, int flags)
 	hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS);
 
 	ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx,
-			       flags & O_CLOEXEC);
+			       flags & (O_CLOEXEC | O_NONBLOCK));
 	if (ufd < 0)
 		kfree(ctx);
 
diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h
index 96ed97dff00..86cb0501d3e 100644
--- a/include/linux/timerfd.h
+++ b/include/linux/timerfd.h
@@ -8,7 +8,7 @@
 #ifndef _LINUX_TIMERFD_H
 #define _LINUX_TIMERFD_H
 
-/* For O_CLOEXEC */
+/* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/fcntl.h>
 
 /* Flags for timerfd_settime.  */
@@ -16,6 +16,7 @@
 
 /* Flags for timerfd_create.  */
 #define TFD_CLOEXEC O_CLOEXEC
+#define TFD_NONBLOCK O_NONBLOCK
 
 
 #endif /* _LINUX_TIMERFD_H */
-- 
cgit v1.2.3


From be61a86d7237dd80510615f38ae21d6e1e98660c Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:40 -0700
Subject: flag parameters: NONBLOCK in pipe

This patch adds O_NONBLOCK support to pipe2.  It is minimally more involved
than the patches for eventfd et.al but still trivial.  The interfaces of the
create_write_pipe and create_read_pipe helper functions were changed and the
one other caller as well.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_pipe2
# ifdef __x86_64__
#  define __NR_pipe2 293
# elif defined __i386__
#  define __NR_pipe2 331
# else
#  error "need __NR_pipe2"
# endif
#endif

int
main (void)
{
  int fds[2];
  if (syscall (__NR_pipe2, fds, 0) == -1)
    {
      puts ("pipe2(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int fl = fcntl (fds[i], F_GETFL);
      if (fl == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (fl & O_NONBLOCK)
        {
          printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1)
    {
      puts ("pipe2(O_NONBLOCK) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int fl = fcntl (fds[i], F_GETFL);
      if (fl == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((fl & O_NONBLOCK) == 0)
        {
          printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/pipe.c          | 14 +++++++-------
 include/linux/fs.h |  4 ++--
 kernel/kmod.c      |  4 ++--
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/fs/pipe.c b/fs/pipe.c
index 68e82061070..10c4e9aa5c4 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -950,7 +950,7 @@ fail_inode:
 	return NULL;
 }
 
-struct file *create_write_pipe(void)
+struct file *create_write_pipe(int flags)
 {
 	int err;
 	struct inode *inode;
@@ -983,7 +983,7 @@ struct file *create_write_pipe(void)
 		goto err_dentry;
 	f->f_mapping = inode->i_mapping;
 
-	f->f_flags = O_WRONLY;
+	f->f_flags = O_WRONLY | (flags & O_NONBLOCK);
 	f->f_version = 0;
 
 	return f;
@@ -1007,7 +1007,7 @@ void free_write_pipe(struct file *f)
 	put_filp(f);
 }
 
-struct file *create_read_pipe(struct file *wrf)
+struct file *create_read_pipe(struct file *wrf, int flags)
 {
 	struct file *f = get_empty_filp();
 	if (!f)
@@ -1019,7 +1019,7 @@ struct file *create_read_pipe(struct file *wrf)
 	f->f_mapping = wrf->f_path.dentry->d_inode->i_mapping;
 
 	f->f_pos = 0;
-	f->f_flags = O_RDONLY;
+	f->f_flags = O_RDONLY | (flags & O_NONBLOCK);
 	f->f_op = &read_pipe_fops;
 	f->f_mode = FMODE_READ;
 	f->f_version = 0;
@@ -1033,13 +1033,13 @@ int do_pipe_flags(int *fd, int flags)
 	int error;
 	int fdw, fdr;
 
-	if (flags & ~O_CLOEXEC)
+	if (flags & ~(O_CLOEXEC | O_NONBLOCK))
 		return -EINVAL;
 
-	fw = create_write_pipe();
+	fw = create_write_pipe(flags);
 	if (IS_ERR(fw))
 		return PTR_ERR(fw);
-	fr = create_read_pipe(fw);
+	fr = create_read_pipe(fw, flags);
 	error = PTR_ERR(fr);
 	if (IS_ERR(fr))
 		goto err_write_pipe;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0e80cd717d3..4b86f806014 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1778,8 +1778,8 @@ static inline void allow_write_access(struct file *file)
 }
 extern int do_pipe(int *);
 extern int do_pipe_flags(int *, int);
-extern struct file *create_read_pipe(struct file *f);
-extern struct file *create_write_pipe(void);
+extern struct file *create_read_pipe(struct file *f, int flags);
+extern struct file *create_write_pipe(int flags);
 extern void free_write_pipe(struct file *);
 
 extern struct file *do_filp_open(int dfd, const char *pathname,
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 90d7af1c165..2989f67c444 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -417,12 +417,12 @@ int call_usermodehelper_stdinpipe(struct subprocess_info *sub_info,
 {
 	struct file *f;
 
-	f = create_write_pipe();
+	f = create_write_pipe(0);
 	if (IS_ERR(f))
 		return PTR_ERR(f);
 	*filp = f;
 
-	f = create_read_pipe(f);
+	f = create_read_pipe(f, 0);
 	if (IS_ERR(f)) {
 		free_write_pipe(*filp);
 		return PTR_ERR(f);
-- 
cgit v1.2.3


From 510df2dd482496083e1c3b1a8c9b6afd5fa4c7d7 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:41 -0700
Subject: flag parameters: NONBLOCK in inotify_init

This patch adds non-blocking support for inotify_init1.  The
additional changes needed are minimal.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_inotify_init1
# ifdef __x86_64__
#  define __NR_inotify_init1 294
# elif defined __i386__
#  define __NR_inotify_init1 332
# else
#  error "need __NR_inotify_init1"
# endif
#endif

#define IN_NONBLOCK O_NONBLOCK

int
main (void)
{
  int fd = syscall (__NR_inotify_init1, 0);
  if (fd == -1)
    {
      puts ("inotify_init1(0) failed");
      return 1;
    }
  int fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (fl & O_NONBLOCK)
    {
      puts ("inotify_init1(0) set non-blocking mode");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_inotify_init1, IN_NONBLOCK);
  if (fd == -1)
    {
      puts ("inotify_init1(IN_NONBLOCK) failed");
      return 1;
    }
  fl = fcntl (fd, F_GETFL);
  if (fl == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((fl & O_NONBLOCK) == 0)
    {
      puts ("inotify_init1(IN_NONBLOCK) set non-blocking mode");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/inotify_user.c       | 4 ++--
 include/linux/inotify.h | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/inotify_user.c b/fs/inotify_user.c
index 851005998cd..dc7e1f61974 100644
--- a/fs/inotify_user.c
+++ b/fs/inotify_user.c
@@ -574,7 +574,7 @@ asmlinkage long sys_inotify_init1(int flags)
 	struct file *filp;
 	int fd, ret;
 
-	if (flags & ~IN_CLOEXEC)
+	if (flags & ~(IN_CLOEXEC | IN_NONBLOCK))
 		return -EINVAL;
 
 	fd = get_unused_fd_flags(flags & O_CLOEXEC);
@@ -613,7 +613,7 @@ asmlinkage long sys_inotify_init1(int flags)
 	filp->f_path.dentry = dget(inotify_mnt->mnt_root);
 	filp->f_mapping = filp->f_path.dentry->d_inode->i_mapping;
 	filp->f_mode = FMODE_READ;
-	filp->f_flags = O_RDONLY;
+	filp->f_flags = O_RDONLY | (flags & O_NONBLOCK);
 	filp->private_data = dev;
 
 	INIT_LIST_HEAD(&dev->events);
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index 72ef8212051..bd578578a8b 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -7,7 +7,7 @@
 #ifndef _LINUX_INOTIFY_H
 #define _LINUX_INOTIFY_H
 
-/* For O_CLOEXEC */
+/* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/fcntl.h>
 #include <linux/types.h>
 
@@ -67,6 +67,7 @@ struct inotify_event {
 
 /* Flags for sys_inotify_init1.  */
 #define IN_CLOEXEC O_CLOEXEC
+#define IN_NONBLOCK O_NONBLOCK
 
 #ifdef __KERNEL__
 
-- 
cgit v1.2.3


From e38b36f325153eaadd1c2a7abc5762079233e540 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:42 -0700
Subject: flag parameters: check magic constants

This patch adds test that ensure the boundary conditions for the various
constants introduced in the previous patches is met.  No code is generated.

[akpm@linux-foundation.org: fix alpha]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/eventfd.c      | 4 ++++
 fs/eventpoll.c    | 3 +++
 fs/inotify_user.c | 4 ++++
 fs/signalfd.c     | 4 ++++
 fs/timerfd.c      | 4 ++++
 net/socket.c      | 6 ++++++
 6 files changed, 25 insertions(+)

diff --git a/fs/eventfd.c b/fs/eventfd.c
index 3ed4466177a..08bf558d040 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -203,6 +203,10 @@ asmlinkage long sys_eventfd2(unsigned int count, int flags)
 	int fd;
 	struct eventfd_ctx *ctx;
 
+	/* Check the EFD_* constants for consistency.  */
+	BUILD_BUG_ON(EFD_CLOEXEC != O_CLOEXEC);
+	BUILD_BUG_ON(EFD_NONBLOCK != O_NONBLOCK);
+
 	if (flags & ~(EFD_CLOEXEC | EFD_NONBLOCK))
 		return -EINVAL;
 
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 3fd4014f3c5..2fdad420404 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1051,6 +1051,9 @@ asmlinkage long sys_epoll_create2(int size, int flags)
 	int error, fd = -1;
 	struct eventpoll *ep;
 
+	/* Check the EPOLL_* constant for consistency.  */
+	BUILD_BUG_ON(EPOLL_CLOEXEC != O_CLOEXEC);
+
 	if (flags & ~EPOLL_CLOEXEC)
 		return -EINVAL;
 
diff --git a/fs/inotify_user.c b/fs/inotify_user.c
index dc7e1f61974..fe79c25d95d 100644
--- a/fs/inotify_user.c
+++ b/fs/inotify_user.c
@@ -574,6 +574,10 @@ asmlinkage long sys_inotify_init1(int flags)
 	struct file *filp;
 	int fd, ret;
 
+	/* Check the IN_* constants for consistency.  */
+	BUILD_BUG_ON(IN_CLOEXEC != O_CLOEXEC);
+	BUILD_BUG_ON(IN_NONBLOCK != O_NONBLOCK);
+
 	if (flags & ~(IN_CLOEXEC | IN_NONBLOCK))
 		return -EINVAL;
 
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 5441a4bca77..9c39bc7f843 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -211,6 +211,10 @@ asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask,
 	sigset_t sigmask;
 	struct signalfd_ctx *ctx;
 
+	/* Check the SFD_* constants for consistency.  */
+	BUILD_BUG_ON(SFD_CLOEXEC != O_CLOEXEC);
+	BUILD_BUG_ON(SFD_NONBLOCK != O_NONBLOCK);
+
 	if (flags & ~(SFD_CLOEXEC | SFD_NONBLOCK))
 		return -EINVAL;
 
diff --git a/fs/timerfd.c b/fs/timerfd.c
index 75d44efe346..c502c60e4f5 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -184,6 +184,10 @@ asmlinkage long sys_timerfd_create(int clockid, int flags)
 	int ufd;
 	struct timerfd_ctx *ctx;
 
+	/* Check the TFD_* constants for consistency.  */
+	BUILD_BUG_ON(TFD_CLOEXEC != O_CLOEXEC);
+	BUILD_BUG_ON(TFD_NONBLOCK != O_NONBLOCK);
+
 	if (flags & ~(TFD_CLOEXEC | TFD_NONBLOCK))
 		return -EINVAL;
 	if (clockid != CLOCK_MONOTONIC &&
diff --git a/net/socket.c b/net/socket.c
index 31105f9048a..1310a82cbba 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1222,6 +1222,12 @@ asmlinkage long sys_socket(int family, int type, int protocol)
 	struct socket *sock;
 	int flags;
 
+	/* Check the SOCK_* constants for consistency.  */
+	BUILD_BUG_ON(SOCK_CLOEXEC != O_CLOEXEC);
+	BUILD_BUG_ON((SOCK_MAX | SOCK_TYPE_MASK) != SOCK_TYPE_MASK);
+	BUILD_BUG_ON(SOCK_CLOEXEC & SOCK_TYPE_MASK);
+	BUILD_BUG_ON(SOCK_NONBLOCK & SOCK_TYPE_MASK);
+
 	flags = type & ~SOCK_TYPE_MASK;
 	if (flags & ~(SOCK_CLOEXEC | SOCK_NONBLOCK))
 		return -EINVAL;
-- 
cgit v1.2.3


From 9fe5ad9c8cef9ad5873d8ee55d1cf00d9b607df0 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Wed, 23 Jul 2008 21:29:43 -0700
Subject: flag parameters add-on: remove epoll_create size param

Remove the size parameter from the new epoll_create syscall and renames the
syscall itself.  The updated test program follows.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_epoll_create2
# ifdef __x86_64__
#  define __NR_epoll_create2 291
# elif defined __i386__
#  define __NR_epoll_create2 329
# else
#  error "need __NR_epoll_create2"
# endif
#endif

#define EPOLL_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_epoll_create2, 0);
  if (fd == -1)
    {
      puts ("epoll_create2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("epoll_create2(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_epoll_create2, EPOLL_CLOEXEC);
  if (fd == -1)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/ia32/ia32entry.S          |  2 +-
 arch/x86/kernel/syscall_table_32.S |  2 +-
 fs/eventpoll.c                     | 18 ++++++++++--------
 include/asm-x86/unistd_32.h        |  2 +-
 include/asm-x86/unistd_64.h        |  4 ++--
 include/linux/eventpoll.h          |  2 +-
 include/linux/syscalls.h           |  2 +-
 7 files changed, 17 insertions(+), 15 deletions(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 4541073dd83..e4bd1793a5e 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -828,7 +828,7 @@ ia32_sys_call_table:
 	.quad compat_sys_timerfd_gettime
 	.quad compat_sys_signalfd4
 	.quad sys_eventfd2
-	.quad sys_epoll_create2
+	.quad sys_epoll_create1
 	.quad sys_dup3			/* 330 */
 	.quad sys_pipe2
 	.quad sys_inotify_init1
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index f59aba5ff0f..d44395ff34c 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -328,7 +328,7 @@ ENTRY(sys_call_table)
 	.long sys_timerfd_gettime
 	.long sys_signalfd4
 	.long sys_eventfd2
-	.long sys_epoll_create2
+	.long sys_epoll_create1
 	.long sys_dup3			/* 330 */
 	.long sys_pipe2
 	.long sys_inotify_init1
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 2fdad420404..0c87474f791 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1046,7 +1046,7 @@ retry:
  * RB tree. With the current implementation, the "size" parameter is ignored
  * (besides sanity checks).
  */
-asmlinkage long sys_epoll_create2(int size, int flags)
+asmlinkage long sys_epoll_create1(int flags)
 {
 	int error, fd = -1;
 	struct eventpoll *ep;
@@ -1058,14 +1058,13 @@ asmlinkage long sys_epoll_create2(int size, int flags)
 		return -EINVAL;
 
 	DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d)\n",
-		     current, size));
+		     current, flags));
 
 	/*
-	 * Sanity check on the size parameter, and create the internal data
-	 * structure ( "struct eventpoll" ).
+	 * Create the internal data structure ( "struct eventpoll" ).
 	 */
-	error = -EINVAL;
-	if (size <= 0 || (error = ep_alloc(&ep)) < 0) {
+	error = ep_alloc(&ep);
+	if (error < 0) {
 		fd = error;
 		goto error_return;
 	}
@@ -1081,14 +1080,17 @@ asmlinkage long sys_epoll_create2(int size, int flags)
 
 error_return:
 	DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
-		     current, size, fd));
+		     current, flags, fd));
 
 	return fd;
 }
 
 asmlinkage long sys_epoll_create(int size)
 {
-	return sys_epoll_create2(size, 0);
+	if (size < 0)
+		return -EINVAL;
+
+	return sys_epoll_create1(0);
 }
 
 /*
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index b3daf503ab9..d7394673b77 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -334,7 +334,7 @@
 #define __NR_timerfd_gettime	326
 #define __NR_signalfd4		327
 #define __NR_eventfd2		328
-#define __NR_epoll_create2	329
+#define __NR_epoll_create1	329
 #define __NR_dup3		330
 #define __NR_pipe2		331
 #define __NR_inotify_init1	332
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index c8cb88d70c6..3a341d79179 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -645,8 +645,8 @@ __SYSCALL(__NR_paccept, sys_paccept)
 __SYSCALL(__NR_signalfd4, sys_signalfd4)
 #define __NR_eventfd2				290
 __SYSCALL(__NR_eventfd2, sys_eventfd2)
-#define __NR_epoll_create2			291
-__SYSCALL(__NR_epoll_create2, sys_epoll_create2)
+#define __NR_epoll_create1			291
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
 #define __NR_dup3				292
 __SYSCALL(__NR_dup3, sys_dup3)
 #define __NR_pipe2				293
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 1cfaa40059c..f1e1d3c4712 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -18,7 +18,7 @@
 #include <linux/fcntl.h>
 #include <linux/types.h>
 
-/* Flags for epoll_create2.  */
+/* Flags for epoll_create1.  */
 #define EPOLL_CLOEXEC O_CLOEXEC
 
 /* Valid opcodes to issue to sys_epoll_ctl() */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 93a7e7f017a..06f2bf76c03 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -431,7 +431,7 @@ asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
 asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			fd_set __user *exp, struct timeval __user *tvp);
 asmlinkage long sys_epoll_create(int size);
-asmlinkage long sys_epoll_create2(int size, int flags);
+asmlinkage long sys_epoll_create1(int flags);
 asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
 				struct epoll_event __user *event);
 asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events,
-- 
cgit v1.2.3


From 920519c1c31ca46ef6caab1a4be102ed0dfb5fbc Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:29:44 -0700
Subject: serial/8250_gsc.c: add MODULE_LICENSE

This patch adds the missing MODULE_LICENSE("GPL").

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250_gsc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 4eb7437a404..0416ad3bc12 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -119,3 +119,5 @@ int __init probe_serial_gsc(void)
 }
 
 module_init(probe_serial_gsc);
+
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 7500b1f602aad75901774a67a687ee985d85893f Mon Sep 17 00:00:00 2001
From: Aristeu Rozanski <arozansk@redhat.com>
Date: Wed, 23 Jul 2008 21:29:45 -0700
Subject: 8250: fix break handling for Intel 82571

Intel 82571 has a "Serial Over LAN" feature that doesn't properly
implements the receiving of break characters.  When a break is received,
it doesn't set UART_LSR_DR and unless another character is received, the
break won't be received by the application.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 27f34a9f9cb..a97f1ae11f7 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1293,7 +1293,18 @@ receive_chars(struct uart_8250_port *up, unsigned int *status)
 	char flag;
 
 	do {
-		ch = serial_inp(up, UART_RX);
+		if (likely(lsr & UART_LSR_DR))
+			ch = serial_inp(up, UART_RX);
+		else
+			/*
+			 * Intel 82571 has a Serial Over Lan device that will
+			 * set UART_LSR_BI without setting UART_LSR_DR when
+			 * it receives a break. To avoid reading from the
+			 * receive buffer without UART_LSR_DR bit set, we
+			 * just force the read character to be 0
+			 */
+			ch = 0;
+
 		flag = TTY_NORMAL;
 		up->port.icount.rx++;
 
@@ -1342,7 +1353,7 @@ receive_chars(struct uart_8250_port *up, unsigned int *status)
 
 ignore_char:
 		lsr = serial_inp(up, UART_LSR);
-	} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
+	} while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
 	spin_unlock(&up->port.lock);
 	tty_flip_buffer_push(tty);
 	spin_lock(&up->port.lock);
@@ -1425,7 +1436,7 @@ serial8250_handle_port(struct uart_8250_port *up)
 
 	DEBUG_INTR("status = %x...", status);
 
-	if (status & UART_LSR_DR)
+	if (status & (UART_LSR_DR | UART_LSR_BI))
 		receive_chars(up, &status);
 	check_modem_status(up);
 	if (status & UART_LSR_THRE)
-- 
cgit v1.2.3


From b76c5a0717094f0a900d9afd8e36f7ad8dbba587 Mon Sep 17 00:00:00 2001
From: "Catalin(ux) M BOIE" <catab@embedromix.ro>
Date: Wed, 23 Jul 2008 21:29:46 -0700
Subject: serial: add support for a no-name 4 ports multiserial card

It is a no-name PCI card.  I found no reference to a producer so I used
"UNKNOWN_0x1584" as the name.

Full lspci:
01:07.0 0780: 10b5:9050 (rev 01)
        Subsystem: 10b5:1584
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- \
                ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- \
                DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 10
        Region 1: I/O ports at ec00 [size=128]
        Region 2: I/O ports at e480 [size=32]
        Region 3: I/O ports at e400 [size=8]
        Capabilities: [40] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA \
                        PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] #06 [0080]
        Capabilities: [4c] Vital Product Data

After:
0000:01:07.0: ttyS4 at I/O 0xe480 (irq = 10) is a 16550A
0000:01:07.0: ttyS5 at I/O 0xe488 (irq = 10) is a 16550A
0000:01:07.0: ttyS6 at I/O 0xe490 (irq = 10) is a 16550A
0000:01:07.0: ttyS7 at I/O 0xe498 (irq = 10) is a 16550A

Signed-off-by: Catalin(ux) M BOIE <catab@embedromix.ro>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250_pci.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 1b36087665a..c2f23933155 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -767,6 +767,9 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
 #define PCI_SUBDEVICE_ID_POCTAL232	0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
 
+/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
+
 /*
  * Master list of serial port init/setup/exit quirks.
  * This does not describe the general nature of the port.
@@ -880,6 +883,15 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup		= pci_default_setup,
 		.exit		= __devexit_p(pci_plx9050_exit),
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_PLX,
+		.device		= PCI_DEVICE_ID_PLX_9050,
+		.subvendor	= PCI_VENDOR_ID_PLX,
+		.subdevice	= PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
+		.init		= pci_plx9050_init,
+		.setup		= pci_default_setup,
+		.exit		= __devexit_p(pci_plx9050_exit),
+	},
 	{
 		.vendor		= PCI_VENDOR_ID_PLX,
 		.device		= PCI_DEVICE_ID_PLX_ROMULUS,
@@ -2197,6 +2209,11 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b2_4_921600 },
+	/* Unknown card - subdevice 0x1584 */
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_VENDOR_ID_PLX,
+		PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
+		pbn_b0_4_115200 },
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
 		PCI_SUBVENDOR_ID_KEYSPAN,
 		PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
-- 
cgit v1.2.3


From 377135912806ddc87d56d64fafa685f4063c45f1 Mon Sep 17 00:00:00 2001
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Wed, 23 Jul 2008 21:29:48 -0700
Subject: serial: Z85C30: avoid a hang at console switch-over

Changes to the generic console support code that happened a while ago
introduced a scenario where the initial console is used in parallel with
the final console during a brief period when switching between the two is
in progress.  During that time a message about the switch-over is printed.

With some combinations of chips, firmware and drivers, such as the Zilog
Z85C30 SCC used with the DECstation, a hang may happen because the
firmware used for the initial console may not expect the state of the chip
after it has been initialised by the driver.  This is not a bug in the
firmware, as some registers it would have to examine are write-only.

This is a workaround for the Z85C30 which reuses the power-management
callback to keep the transmitter of the line associated with the console
enabled.  It reflects the consensus reached in a discussion a while ago.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/zs.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
index bd45b6230fd..9e6a873f820 100644
--- a/drivers/serial/zs.c
+++ b/drivers/serial/zs.c
@@ -787,7 +787,6 @@ static int zs_startup(struct uart_port *uport)
 	zport->regs[1] &= ~RxINT_MASK;
 	zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB;
 	zport->regs[3] |= RxENABLE;
-	zport->regs[5] |= TxENAB;
 	zport->regs[15] |= BRKIE;
 	write_zsreg(zport, R1, zport->regs[1]);
 	write_zsreg(zport, R3, zport->regs[3]);
@@ -814,7 +813,6 @@ static void zs_shutdown(struct uart_port *uport)
 
 	spin_lock_irqsave(&scc->zlock, flags);
 
-	zport->regs[5] &= ~TxENAB;
 	zport->regs[3] &= ~RxENABLE;
 	write_zsreg(zport, R5, zport->regs[5]);
 	write_zsreg(zport, R3, zport->regs[3]);
@@ -959,6 +957,23 @@ static void zs_set_termios(struct uart_port *uport, struct ktermios *termios,
 	spin_unlock_irqrestore(&scc->zlock, flags);
 }
 
+/*
+ * Hack alert!
+ * Required solely so that the initial PROM-based console
+ * works undisturbed in parallel with this one.
+ */
+static void zs_pm(struct uart_port *uport, unsigned int state,
+		  unsigned int oldstate)
+{
+	struct zs_port *zport = to_zport(uport);
+
+	if (state < 3)
+		zport->regs[5] |= TxENAB;
+	else
+		zport->regs[5] &= ~TxENAB;
+	write_zsreg(zport, R5, zport->regs[5]);
+}
+
 
 static const char *zs_type(struct uart_port *uport)
 {
@@ -1041,6 +1056,7 @@ static struct uart_ops zs_ops = {
 	.startup	= zs_startup,
 	.shutdown	= zs_shutdown,
 	.set_termios	= zs_set_termios,
+	.pm		= zs_pm,
 	.type		= zs_type,
 	.release_port	= zs_release_port,
 	.request_port	= zs_request_port,
@@ -1190,6 +1206,7 @@ static int __init zs_console_setup(struct console *co, char *options)
 		return ret;
 
 	zs_reset(zport);
+	zs_pm(uport, 0, -1);
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
-- 
cgit v1.2.3


From e9a8f4d1de12633bfb71b5fee47745b32877b7b5 Mon Sep 17 00:00:00 2001
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Wed, 23 Jul 2008 21:29:49 -0700
Subject: serial: DZ11: avoid a hang at console switch-over

Changes to the generic console support code that happened a while ago
introduced a scenario where the initial console is used in parallel with
the final console during a brief period when switching between the two is
in progress.  During that time a message about the switch-over is printed.

With some combinations of chips, firmware and drivers, such as the DEC
DZ11 clone used with the DECstation, a hang may happen because the
firmware used for the initial console may not expect the state of the chip
after it has been initialised by the driver.

This is a workaround for the DZ11 which reuses the power-management
callback to keep the transmitter of the line associated with the console
enabled.  It reflects the consensus reached in a discussion a while ago.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/dz.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index a81d2c2ff8a..6042b87797a 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -642,6 +642,26 @@ static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
 	spin_unlock_irqrestore(&dport->port.lock, flags);
 }
 
+/*
+ * Hack alert!
+ * Required solely so that the initial PROM-based console
+ * works undisturbed in parallel with this one.
+ */
+static void dz_pm(struct uart_port *uport, unsigned int state,
+		  unsigned int oldstate)
+{
+	struct dz_port *dport = to_dport(uport);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dport->port.lock, flags);
+	if (state < 3)
+		dz_start_tx(&dport->port);
+	else
+		dz_stop_tx(&dport->port);
+	spin_unlock_irqrestore(&dport->port.lock, flags);
+}
+
+
 static const char *dz_type(struct uart_port *uport)
 {
 	return "DZ";
@@ -738,6 +758,7 @@ static struct uart_ops dz_ops = {
 	.startup	= dz_startup,
 	.shutdown	= dz_shutdown,
 	.set_termios	= dz_set_termios,
+	.pm		= dz_pm,
 	.type		= dz_type,
 	.release_port	= dz_release_port,
 	.request_port	= dz_request_port,
@@ -861,7 +882,10 @@ static int __init dz_console_setup(struct console *co, char *options)
 	if (ret)
 		return ret;
 
+	spin_lock_init(&dport->port.lock);	/* For dz_pm().  */
+
 	dz_reset(dport);
+	dz_pm(uport, 0, -1);
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
-- 
cgit v1.2.3


From ae2d4c396e19f45918ed6e0900b031538d009823 Mon Sep 17 00:00:00 2001
From: Nye Liu <nyet@mrv.com>
Date: Wed, 23 Jul 2008 21:29:50 -0700
Subject: cpm1: don't send break on TX_STOP, don't interrupt RX/TX when
 adjusting termios parameters

Before setting STOP_TX, set _brkcr to 0 so the SMC does not send a break
character.  The driver appears to properly re-initialize _brkcr when the
SMC is restarted.

Do not interrupt RX/TX when the termios is being adjusted; it results in
corrupted characters appearing on the line.

Cc: Vitaly Bordug <vbordug@ru.mvista.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/cpm_uart/cpm_uart_core.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 1ff80de177d..a4f86927a74 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -435,10 +435,13 @@ static void cpm_uart_shutdown(struct uart_port *port)
 		}
 
 		/* Shut them really down and reinit buffer descriptors */
-		if (IS_SMC(pinfo))
+		if (IS_SMC(pinfo)) {
+			out_be16(&pinfo->smcup->smc_brkcr, 0);
 			cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
-		else
+		} else {
+			out_be16(&pinfo->sccup->scc_brkcr, 0);
 			cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
+		}
 
 		cpm_uart_initbd(pinfo);
 	}
@@ -554,9 +557,11 @@ static void cpm_uart_set_termios(struct uart_port *port,
 		 * enables, because we want to put them back if they were
 		 * present.
 		 */
-		prev_mode = in_be16(&smcp->smc_smcmr);
-		out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | SMCMR_SM_UART);
-		setbits16(&smcp->smc_smcmr, (prev_mode & (SMCMR_REN | SMCMR_TEN)));
+		prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN);
+		/* Output in *one* operation, so we don't interrupt RX/TX if they
+		 * were already enabled. */
+		out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval |
+		    SMCMR_SM_UART | prev_mode);
 	} else {
 		out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
 	}
@@ -1198,12 +1203,14 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	udbg_putc = NULL;
 #endif
 
-	cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
-
 	if (IS_SMC(pinfo)) {
+		out_be16(&pinfo->smcup->smc_brkcr, 0);
+		cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
 		clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
 		clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
 	} else {
+		out_be16(&pinfo->sccup->scc_brkcr, 0);
+		cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
 		clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
 		clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	}
-- 
cgit v1.2.3


From 708d8cefd0f6d8dc13027f899e865ccfa5f63871 Mon Sep 17 00:00:00 2001
From: Andre Haupt <andre@bitwigglers.org>
Date: Wed, 23 Jul 2008 21:29:51 -0700
Subject: stallion: removed unused variable

Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/stallion.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index b976248e107..19db1eb87c2 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -1256,7 +1256,6 @@ static int stl_tiocmset(struct tty_struct *tty, struct file *file,
 static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct stlport	*portp;
-	unsigned int	ival;
 	int		rc;
 	void __user *argp = (void __user *)arg;
 
-- 
cgit v1.2.3


From a61f5345eba34772a71523227de890a28410f320 Mon Sep 17 00:00:00 2001
From: Chen Gong <g.chen@freescale.com>
Date: Wed, 23 Jul 2008 21:29:52 -0700
Subject: spi: spi_mpc83xx clockrate fixes

This updates the SPI clock rate calculations for the spi_mpc83xx driver.
Some boundary conditions were wrong, and in several cases divide-by-16
wasn't always needed

Signed-off-by: Chen Gong <g.chen@freescale.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/spi_mpc83xx.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 6832da6f710..070c6219e2d 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -266,21 +266,24 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 
 	cs->hw_mode |= SPMODE_LEN(bits_per_word);
 
-	if ((mpc83xx_spi->spibrg / hz) >= 64) {
-		pm = mpc83xx_spi->spibrg / (hz * 64) - 1;
-		if (pm > 0x0f) {
-			dev_err(&spi->dev, "Requested speed is too "
-				"low: %d Hz. Will use %d Hz instead.\n",
-				hz, mpc83xx_spi->spibrg / 1024);
-			pm = 0x0f;
+	if ((mpc83xx_spi->spibrg / hz) > 64) {
+		pm = mpc83xx_spi->spibrg / (hz * 64);
+		if (pm > 16) {
+			cs->hw_mode |= SPMODE_DIV16;
+			pm /= 16;
+			if (pm > 16) {
+				dev_err(&spi->dev, "Requested speed is too "
+					"low: %d Hz. Will use %d Hz instead.\n",
+					hz, mpc83xx_spi->spibrg / 1024);
+				pm = 16;
+			}
 		}
-		cs->hw_mode |= SPMODE_PM(pm) | SPMODE_DIV16;
-	} else {
+	} else
 		pm = mpc83xx_spi->spibrg / (hz * 4);
-		if (pm)
-			pm--;
-		cs->hw_mode |= SPMODE_PM(pm);
-	}
+	if (pm)
+		pm--;
+
+	cs->hw_mode |= SPMODE_PM(pm);
 	regval =  mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
 	if (cs->hw_mode != regval) {
 		unsigned long flags;
-- 
cgit v1.2.3


From 166a375b657b7af494f4ce3f72c4d2002180da44 Mon Sep 17 00:00:00 2001
From: Roel Kluin <12o3l@tiscali.nl>
Date: Wed, 23 Jul 2008 21:29:53 -0700
Subject: xilinx_spi: test below 0 on unsigned irq in xilinx_spi_probe()

xilinx_spi->irq is unsigned, so the test fails

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrei Konovalov <akonovalov@ru.mvista.com>
Cc: Yuri Frolov <yfrolov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/xilinx_spi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 113a0468ffc..68d6f4988fb 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -353,11 +353,12 @@ static int __init xilinx_spi_probe(struct platform_device *dev)
 		goto put_master;
 	}
 
-	xspi->irq = platform_get_irq(dev, 0);
-	if (xspi->irq < 0) {
+	ret = platform_get_irq(dev, 0);
+	if (ret < 0) {
 		ret = -ENXIO;
 		goto unmap_io;
 	}
+	xspi->irq = ret;
 
 	master->bus_num = pdata->bus_num;
 	master->num_chipselect = pdata->num_chipselect;
-- 
cgit v1.2.3


From 6291fe2abce4689d6ee7cbaea16692c79bf0d01b Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Wed, 23 Jul 2008 21:29:53 -0700
Subject: SPI Kconfig simplifications

Use "if SPI_MASTER" to remove numerous dependencies.

[dbrownell@users.sourceforge.net: remove a couple now-needless EXPERIMENTAL dependencies too]
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/Kconfig | 45 +++++++++++++++++++++++----------------------
 1 file changed, 23 insertions(+), 22 deletions(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 66ec5d8808d..2303521b4f0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -49,25 +49,26 @@ config SPI_MASTER
 	  controller and the protocol drivers for the SPI slave chips
 	  that are connected.
 
+if SPI_MASTER
+
 comment "SPI Master Controller Drivers"
-	depends on SPI_MASTER
 
 config SPI_ATMEL
 	tristate "Atmel SPI Controller"
-	depends on (ARCH_AT91 || AVR32) && SPI_MASTER
+	depends on (ARCH_AT91 || AVR32)
 	help
 	  This selects a driver for the Atmel SPI Controller, present on
 	  many AT32 (AVR32) and AT91 (ARM) chips.
 
 config SPI_BFIN
 	tristate "SPI controller driver for ADI Blackfin5xx"
-	depends on SPI_MASTER && BLACKFIN
+	depends on BLACKFIN
 	help
 	  This is the SPI controller master driver for Blackfin 5xx processor.
 
 config SPI_AU1550
 	tristate "Au1550/Au12x0 SPI Controller"
-	depends on SPI_MASTER && (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
+	depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  If you say yes to this option, support will be included for the
@@ -78,7 +79,6 @@ config SPI_AU1550
 
 config SPI_BITBANG
 	tristate "Bitbanging SPI master"
-	depends on SPI_MASTER && EXPERIMENTAL
 	help
 	  With a few GPIO pins, your system can bitbang the SPI protocol.
 	  Select this to get SPI support through I/O pins (GPIO, parallel
@@ -92,7 +92,7 @@ config SPI_BITBANG
 
 config SPI_BUTTERFLY
 	tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
-	depends on SPI_MASTER && PARPORT && EXPERIMENTAL
+	depends on PARPORT
 	select SPI_BITBANG
 	help
 	  This uses a custom parallel port cable to connect to an AVR
@@ -102,14 +102,14 @@ config SPI_BUTTERFLY
 
 config SPI_IMX
 	tristate "Freescale iMX SPI controller"
-	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+	depends on ARCH_IMX && EXPERIMENTAL
 	help
 	  This enables using the Freescale iMX SPI controller in master
 	  mode.
 
 config SPI_LM70_LLP
 	tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
-	depends on SPI_MASTER && PARPORT && EXPERIMENTAL
+	depends on PARPORT && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  This driver supports the NS LM70 LLP Evaluation Board,
@@ -118,14 +118,14 @@ config SPI_LM70_LLP
 
 config SPI_MPC52xx_PSC
 	tristate "Freescale MPC52xx PSC SPI controller"
-	depends on SPI_MASTER && PPC_MPC52xx && EXPERIMENTAL
+	depends on PPC_MPC52xx && EXPERIMENTAL
 	help
 	  This enables using the Freescale MPC52xx Programmable Serial
 	  Controller in master SPI mode.
 
 config SPI_MPC83xx
 	tristate "Freescale MPC83xx/QUICC Engine SPI controller"
-	depends on SPI_MASTER && (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
+	depends on (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
 	help
 	  This enables using the Freescale MPC83xx and QUICC Engine SPI
 	  controllers in master mode.
@@ -137,21 +137,21 @@ config SPI_MPC83xx
 
 config SPI_OMAP_UWIRE
 	tristate "OMAP1 MicroWire"
-	depends on SPI_MASTER && ARCH_OMAP1
+	depends on ARCH_OMAP1
 	select SPI_BITBANG
 	help
 	  This hooks up to the MicroWire controller on OMAP1 chips.
 
 config SPI_OMAP24XX
 	tristate "McSPI driver for OMAP24xx/OMAP34xx"
-	depends on SPI_MASTER && (ARCH_OMAP24XX || ARCH_OMAP34XX)
+	depends on ARCH_OMAP24XX || ARCH_OMAP34XX
 	help
 	  SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
 	  (McSPI) modules.
 
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
-	depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+	depends on ARCH_PXA && EXPERIMENTAL
 	select PXA_SSP
 	help
 	  This enables using a PXA2xx SSP port as a SPI master controller.
@@ -160,14 +160,14 @@ config SPI_PXA2XX
 
 config SPI_S3C24XX
 	tristate "Samsung S3C24XX series SPI"
-	depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+	depends on ARCH_S3C2410 && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  SPI driver for Samsung S3C24XX series ARM SoCs
 
 config SPI_S3C24XX_GPIO
 	tristate "Samsung S3C24XX series SPI by GPIO"
-	depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+	depends on ARCH_S3C2410 && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  SPI driver for Samsung S3C24XX series ARM SoCs using
@@ -177,20 +177,20 @@ config SPI_S3C24XX_GPIO
 
 config SPI_SH_SCI
 	tristate "SuperH SCI SPI controller"
-	depends on SPI_MASTER && SUPERH
+	depends on SUPERH
 	select SPI_BITBANG
 	help
 	  SPI driver for SuperH SCI blocks.
 
 config SPI_TXX9
 	tristate "Toshiba TXx9 SPI controller"
-	depends on SPI_MASTER && GENERIC_GPIO && CPU_TX49XX
+	depends on GENERIC_GPIO && CPU_TX49XX
 	help
 	  SPI driver for Toshiba TXx9 MIPS SoCs
 
 config SPI_XILINX
 	tristate "Xilinx SPI controller"
-	depends on SPI_MASTER && XILINX_VIRTEX && EXPERIMENTAL
+	depends on XILINX_VIRTEX && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  This exposes the SPI controller IP from the Xilinx EDK.
@@ -207,11 +207,10 @@ config SPI_XILINX
 # being probably the most widely used ones.
 #
 comment "SPI Protocol Masters"
-	depends on SPI_MASTER
 
 config SPI_AT25
 	tristate "SPI EEPROMs from most vendors"
-	depends on SPI_MASTER && SYSFS
+	depends on SYSFS
 	help
 	  Enable this driver to get read/write support to most SPI EEPROMs,
 	  after you configure the board init code to know about each eeprom
@@ -222,7 +221,7 @@ config SPI_AT25
 
 config SPI_SPIDEV
 	tristate "User mode SPI device driver support"
-	depends on SPI_MASTER && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	help
 	  This supports user mode SPI protocol drivers.
 
@@ -231,7 +230,7 @@ config SPI_SPIDEV
 
 config SPI_TLE62X0
 	tristate "Infineon TLE62X0 (for power switching)"
-	depends on SPI_MASTER && SYSFS
+	depends on SYSFS
 	help
 	  SPI driver for Infineon TLE62X0 series line driver chips,
 	  such as the TLE6220, TLE6230 and TLE6240.  This provides a
@@ -242,6 +241,8 @@ config SPI_TLE62X0
 # Add new SPI protocol masters in alphabetical order above this line
 #
 
+endif # SPI_MASTER
+
 # (slave support would go here)
 
 endif # SPI
-- 
cgit v1.2.3


From 102eb97564c73ea73645b38599c5cbe6f54b030c Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Wed, 23 Jul 2008 21:29:55 -0700
Subject: spi: make spi_board_info.modalias a char array

Currently, 'modalias' in the spi_device structure is a 'const char *'.
The spi_new_device() function fills in the modalias value from a passed in
spi_board_info data block.  Since it is a pointer copy, the new spi_device
remains dependent on the spi_board_info structure after the new spi_device
is registered (no other fields in spi_device directly depend on the
spi_board_info structure; all of the other data is copied).

This causes a problem when dynamically propulating the list of attached
SPI devices.  For example, in arch/powerpc, the list of SPI devices can be
populated from data in the device tree.  With the current code, the device
tree adapter must kmalloc() a new spi_board_info structure for each new
SPI device it finds in the device tree, and there is no simple mechanism
in place for keeping track of these allocations.

This patch changes modalias from a 'const char *' to a fixed char array.
By copying the modalias string instead of referencing it, the dependency
on the spi_board_info structure is eliminated and an outside caller does
not need to maintain a separate spi_board_info allocation for each device.

If searched through the code to the best of my ability for any references
to modalias which may be affected by this change and haven't found
anything.  It has been tested with the lite5200b platform in arch/powerpc.

[dbrownell@users.sourceforge.net: cope with linux-next changes: KOBJ_NAME_LEN obliterated, etc]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/spi.c       | 4 +++-
 include/linux/spi/spi.h | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 1771b2456bf..ecca4a6a6f9 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -218,6 +218,8 @@ struct spi_device *spi_new_device(struct spi_master *master,
 	if (!spi_master_get(master))
 		return NULL;
 
+	WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
+
 	proxy = kzalloc(sizeof *proxy, GFP_KERNEL);
 	if (!proxy) {
 		dev_err(dev, "can't alloc dev for cs%d\n",
@@ -229,7 +231,7 @@ struct spi_device *spi_new_device(struct spi_master *master,
 	proxy->max_speed_hz = chip->max_speed_hz;
 	proxy->mode = chip->mode;
 	proxy->irq = chip->irq;
-	proxy->modalias = chip->modalias;
+	strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
 
 	snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id,
 			"%s.%u", master->dev.bus_id,
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index b9a76c97208..a9cc29d4665 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -82,7 +82,7 @@ struct spi_device {
 	int			irq;
 	void			*controller_state;
 	void			*controller_data;
-	const char		*modalias;
+	char			modalias[32];
 
 	/*
 	 * likely need more hooks for more protocol options affecting how
-- 
cgit v1.2.3


From 4ef754b7d7971a704d5b1b4608839da1bae37e5e Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 23 Jul 2008 21:29:55 -0700
Subject: spidev: BKL removal

Another step to removing ->ioctl and to removing the BKL

[dbrownell@users.sourceforge.net: take final step; BKL not needed]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/spidev.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 2833fd772a2..e5e0cfed5e3 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -228,7 +228,6 @@ static int spidev_message(struct spidev_data *spidev,
 	 * We walk the array of user-provided transfers, using each one
 	 * to initialize a kernel version of the same transfer.
 	 */
-	mutex_lock(&spidev->buf_lock);
 	buf = spidev->buffer;
 	total = 0;
 	for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
@@ -296,14 +295,12 @@ static int spidev_message(struct spidev_data *spidev,
 	status = total;
 
 done:
-	mutex_unlock(&spidev->buf_lock);
 	kfree(k_xfers);
 	return status;
 }
 
-static int
-spidev_ioctl(struct inode *inode, struct file *filp,
-		unsigned int cmd, unsigned long arg)
+static long
+spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	int			err = 0;
 	int			retval = 0;
@@ -341,6 +338,14 @@ spidev_ioctl(struct inode *inode, struct file *filp,
 	if (spi == NULL)
 		return -ESHUTDOWN;
 
+	/* use the buffer lock here for triple duty:
+	 *  - prevent I/O (from us) so calling spi_setup() is safe;
+	 *  - prevent concurrent SPI_IOC_WR_* from morphing
+	 *    data fields while SPI_IOC_RD_* reads them;
+	 *  - SPI_IOC_MESSAGE needs the buffer locked "normally".
+	 */
+	mutex_lock(&spidev->buf_lock);
+
 	switch (cmd) {
 	/* read requests */
 	case SPI_IOC_RD_MODE:
@@ -456,6 +461,8 @@ spidev_ioctl(struct inode *inode, struct file *filp,
 		kfree(ioc);
 		break;
 	}
+
+	mutex_unlock(&spidev->buf_lock);
 	spi_dev_put(spi);
 	return retval;
 }
@@ -533,7 +540,7 @@ static struct file_operations spidev_fops = {
 	 */
 	.write =	spidev_write,
 	.read =		spidev_read,
-	.ioctl =	spidev_ioctl,
+	.unlocked_ioctl = spidev_ioctl,
 	.open =		spidev_open,
 	.release =	spidev_release,
 };
-- 
cgit v1.2.3


From 3a93a159c61e38a12f7ecbb3a25cf3f012abcf7a Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Wed, 23 Jul 2008 21:29:56 -0700
Subject: spi: au1550_spi: proper platform device

Remove the Au1550 resource table and instead extract MMIO/IRQ/DMA
resources from platform resource information like any well-behaved
platform driver.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/au1550_spi.c                  | 138 ++++++++++++++++--------------
 include/asm-mips/mach-au1x00/au1550_spi.h |   1 -
 2 files changed, 74 insertions(+), 65 deletions(-)

diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 072c4a59533..3860dd2fa5d 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -26,6 +26,7 @@
 #include <linux/errno.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/resource.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/dma-mapping.h>
@@ -81,6 +82,7 @@ struct au1550_spi {
 	struct spi_master *master;
 	struct device *dev;
 	struct au1550_spi_info *pdata;
+	struct resource *ioarea;
 };
 
 
@@ -96,6 +98,8 @@ static dbdev_tab_t au1550_spi_mem_dbdev =
 	.dev_intpolarity	= 0
 };
 
+static int ddma_memid;	/* id to above mem dma device */
+
 static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw);
 
 
@@ -732,6 +736,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 {
 	struct au1550_spi *hw;
 	struct spi_master *master;
+	struct resource *r;
 	int err = 0;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi));
@@ -753,76 +758,64 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 		goto err_no_pdata;
 	}
 
-	platform_set_drvdata(pdev, hw);
-
-	init_completion(&hw->master_done);
-
-	hw->bitbang.master = hw->master;
-	hw->bitbang.setup_transfer = au1550_spi_setupxfer;
-	hw->bitbang.chipselect = au1550_spi_chipsel;
-	hw->bitbang.master->setup = au1550_spi_setup;
-	hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
+	r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no IRQ\n");
+		err = -ENODEV;
+		goto err_no_iores;
+	}
+	hw->irq = r->start;
+
+	hw->usedma = 0;
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (r) {
+		hw->dma_tx_id = r->start;
+		r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+		if (r) {
+			hw->dma_rx_id = r->start;
+			if (usedma && ddma_memid) {
+				if (pdev->dev.dma_mask == NULL)
+					dev_warn(&pdev->dev, "no dma mask\n");
+				else
+					hw->usedma = 1;
+			}
+		}
+	}
 
-	switch (hw->pdata->bus_num) {
-	case 0:
-		hw->irq = AU1550_PSC0_INT;
-		hw->regs = (volatile psc_spi_t *)PSC0_BASE_ADDR;
-		hw->dma_rx_id = DSCR_CMD0_PSC0_RX;
-		hw->dma_tx_id = DSCR_CMD0_PSC0_TX;
-		break;
-	case 1:
-		hw->irq = AU1550_PSC1_INT;
-		hw->regs = (volatile psc_spi_t *)PSC1_BASE_ADDR;
-		hw->dma_rx_id = DSCR_CMD0_PSC1_RX;
-		hw->dma_tx_id = DSCR_CMD0_PSC1_TX;
-		break;
-	case 2:
-		hw->irq = AU1550_PSC2_INT;
-		hw->regs = (volatile psc_spi_t *)PSC2_BASE_ADDR;
-		hw->dma_rx_id = DSCR_CMD0_PSC2_RX;
-		hw->dma_tx_id = DSCR_CMD0_PSC2_TX;
-		break;
-	case 3:
-		hw->irq = AU1550_PSC3_INT;
-		hw->regs = (volatile psc_spi_t *)PSC3_BASE_ADDR;
-		hw->dma_rx_id = DSCR_CMD0_PSC3_RX;
-		hw->dma_tx_id = DSCR_CMD0_PSC3_TX;
-		break;
-	default:
-		dev_err(&pdev->dev, "Wrong bus_num of SPI\n");
-		err = -ENOENT;
-		goto err_no_pdata;
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no mmio resource\n");
+		err = -ENODEV;
+		goto err_no_iores;
 	}
 
-	if (request_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t),
-			pdev->name) == NULL) {
+	hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t),
+					pdev->name);
+	if (!hw->ioarea) {
 		dev_err(&pdev->dev, "Cannot reserve iomem region\n");
 		err = -ENXIO;
 		goto err_no_iores;
 	}
 
-
-	if (usedma) {
-		if (pdev->dev.dma_mask == NULL)
-			dev_warn(&pdev->dev, "no dma mask\n");
-		else
-			hw->usedma = 1;
+	hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t));
+	if (!hw->regs) {
+		dev_err(&pdev->dev, "cannot ioremap\n");
+		err = -ENXIO;
+		goto err_ioremap;
 	}
 
-	if (hw->usedma) {
-		/*
-		 * create memory device with 8 bits dev_devwidth
-		 * needed for proper byte ordering to spi fifo
-		 */
-		int memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
-		if (!memid) {
-			dev_err(&pdev->dev,
-				"Cannot create dma 8 bit mem device\n");
-			err = -ENXIO;
-			goto err_dma_add_dev;
-		}
+	platform_set_drvdata(pdev, hw);
 
-		hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(memid,
+	init_completion(&hw->master_done);
+
+	hw->bitbang.master = hw->master;
+	hw->bitbang.setup_transfer = au1550_spi_setupxfer;
+	hw->bitbang.chipselect = au1550_spi_chipsel;
+	hw->bitbang.master->setup = au1550_spi_setup;
+	hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
+
+	if (hw->usedma) {
+		hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid,
 			hw->dma_tx_id, NULL, (void *)hw);
 		if (hw->dma_tx_ch == 0) {
 			dev_err(&pdev->dev,
@@ -841,7 +834,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 
 
 		hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id,
-			memid, NULL, (void *)hw);
+			ddma_memid, NULL, (void *)hw);
 		if (hw->dma_rx_ch == 0) {
 			dev_err(&pdev->dev,
 				"Cannot allocate rx dma channel\n");
@@ -874,7 +867,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev)
 		goto err_no_irq;
 	}
 
-	master->bus_num = hw->pdata->bus_num;
+	master->bus_num = pdev->id;
 	master->num_chipselect = hw->pdata->num_chipselect;
 
 	/*
@@ -924,8 +917,11 @@ err_no_txdma_descr:
 		au1xxx_dbdma_chan_free(hw->dma_tx_ch);
 
 err_no_txdma:
-err_dma_add_dev:
-	release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t));
+	iounmap((void __iomem *)hw->regs);
+
+err_ioremap:
+	release_resource(hw->ioarea);
+	kfree(hw->ioarea);
 
 err_no_iores:
 err_no_pdata:
@@ -944,7 +940,9 @@ static int __exit au1550_spi_remove(struct platform_device *pdev)
 
 	spi_bitbang_stop(&hw->bitbang);
 	free_irq(hw->irq, hw);
-	release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t));
+	iounmap((void __iomem *)hw->regs);
+	release_resource(hw->ioarea);
+	kfree(hw->ioarea);
 
 	if (hw->usedma) {
 		au1550_spi_dma_rxtmp_free(hw);
@@ -971,12 +969,24 @@ static struct platform_driver au1550_spi_drv = {
 
 static int __init au1550_spi_init(void)
 {
+	/*
+	 * create memory device with 8 bits dev_devwidth
+	 * needed for proper byte ordering to spi fifo
+	 */
+	if (usedma) {
+		ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
+		if (!ddma_memid)
+			printk(KERN_ERR "au1550-spi: cannot add memory"
+					"dbdma device\n");
+	}
 	return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe);
 }
 module_init(au1550_spi_init);
 
 static void __exit au1550_spi_exit(void)
 {
+	if (usedma && ddma_memid)
+		au1xxx_ddma_del_device(ddma_memid);
 	platform_driver_unregister(&au1550_spi_drv);
 }
 module_exit(au1550_spi_exit);
diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h
index 40e6c489833..08e1958e941 100644
--- a/include/asm-mips/mach-au1x00/au1550_spi.h
+++ b/include/asm-mips/mach-au1x00/au1550_spi.h
@@ -6,7 +6,6 @@
 #define _AU1550_SPI_H_
 
 struct au1550_spi_info {
-	s16 bus_num;		/* defines which PSC and IRQ to use */
 	u32 mainclk_hz;		/* main input clock frequency of PSC */
 	u16 num_chipselect;	/* number of chipselects supported */
 	void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
-- 
cgit v1.2.3


From bbe48ecc7f6559318cfc6c023da225a0b0e14ab3 Mon Sep 17 00:00:00 2001
From: Jan Nikitenko <jan.nikitenko@gmail.com>
Date: Wed, 23 Jul 2008 21:29:57 -0700
Subject: spi: au1550_spi: improve pio transfer mode

Improve PIO transfer mode of au1550 spi controller by continuing of spi
transfer, instead of aborting transfer when transmit underflow interrupt
occurrs.

Verified by oscilloscope that the spi clock pauses on trasmit underflow,
so transfer continuation is perfectly valid even though au1550 datasheet
says that on tx underflow zeroes will be transfered.

Also make some error messages more specific.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/au1550_spi.c | 69 ++++++++++++++++++++++++++++++++++--------------
 1 file changed, 49 insertions(+), 20 deletions(-)

diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 3860dd2fa5d..9149689c79d 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -484,9 +484,13 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
 		au1xxx_dbdma_reset(hw->dma_tx_ch);
 		au1550_spi_reset_fifos(hw);
 
-		dev_err(hw->dev,
-			"Unexpected SPI error: event=0x%x stat=0x%x!\n",
-			evnt, stat);
+		if (evnt == PSC_SPIEVNT_RO)
+			dev_err(hw->dev,
+				"dma transfer: receive FIFO overflow!\n");
+		else
+			dev_err(hw->dev,
+				"dma transfer: unexpected SPI error "
+				"(event=0x%x stat=0x%x)!\n", evnt, stat);
 
 		complete(&hw->master_done);
 		return IRQ_HANDLED;
@@ -596,17 +600,17 @@ static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw)
 
 	if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO
 				| PSC_SPIEVNT_RU | PSC_SPIEVNT_TO
-				| PSC_SPIEVNT_TU | PSC_SPIEVNT_SD))
+				| PSC_SPIEVNT_SD))
 			!= 0) {
-		dev_err(hw->dev,
-			"Unexpected SPI error: event=0x%x stat=0x%x!\n",
-			evnt, stat);
 		/*
 		 * due to an error we consider transfer as done,
 		 * so mask all events until before next transfer start
 		 */
 		au1550_spi_mask_ack_all(hw);
 		au1550_spi_reset_fifos(hw);
+		dev_err(hw->dev,
+			"pio transfer: unexpected SPI error "
+			"(event=0x%x stat=0x%x)!\n", evnt, stat);
 		complete(&hw->master_done);
 		return IRQ_HANDLED;
 	}
@@ -620,27 +624,50 @@ static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw)
 		stat = hw->regs->psc_spistat;
 		au_sync();
 
-		if ((stat & PSC_SPISTAT_RE) == 0 && hw->rx_count < hw->len) {
+		/*
+		 * Take care to not let the Rx FIFO overflow.
+		 *
+		 * We only write a byte if we have read one at least. Initially,
+		 * the write fifo is full, so we should read from the read fifo
+		 * first.
+		 * In case we miss a word from the read fifo, we should get a
+		 * RO event and should back out.
+		 */
+		if (!(stat & PSC_SPISTAT_RE) && hw->rx_count < hw->len) {
 			hw->rx_word(hw);
-			/* ack the receive request event */
-			hw->regs->psc_spievent = PSC_SPIEVNT_RR;
-			au_sync();
 			busy = 1;
-		}
 
-		if ((stat & PSC_SPISTAT_TF) == 0 && hw->tx_count < hw->len) {
-			hw->tx_word(hw);
-			/* ack the transmit request event */
-			hw->regs->psc_spievent = PSC_SPIEVNT_TR;
-			au_sync();
-			busy = 1;
+			if (!(stat & PSC_SPISTAT_TF) && hw->tx_count < hw->len)
+				hw->tx_word(hw);
 		}
 	} while (busy);
 
-	evnt = hw->regs->psc_spievent;
+	hw->regs->psc_spievent = PSC_SPIEVNT_RR | PSC_SPIEVNT_TR;
 	au_sync();
 
-	if (hw->rx_count >= hw->len || (evnt & PSC_SPIEVNT_MD) != 0) {
+	/*
+	 * Restart the SPI transmission in case of a transmit underflow.
+	 * This seems to work despite the notes in the Au1550 data book
+	 * of Figure 8-4 with flowchart for SPI master operation:
+	 *
+	 * """Note 1: An XFR Error Interrupt occurs, unless masked,
+	 * for any of the following events: Tx FIFO Underflow,
+	 * Rx FIFO Overflow, or Multiple-master Error
+	 *    Note 2: In case of a Tx Underflow Error, all zeroes are
+	 * transmitted."""
+	 *
+	 * By simply restarting the spi transfer on Tx Underflow Error,
+	 * we assume that spi transfer was paused instead of zeroes
+	 * transmittion mentioned in the Note 2 of Au1550 data book.
+	 */
+	if (evnt & PSC_SPIEVNT_TU) {
+		hw->regs->psc_spievent = PSC_SPIEVNT_TU | PSC_SPIEVNT_MD;
+		au_sync();
+		hw->regs->psc_spipcr = PSC_SPIPCR_MS;
+		au_sync();
+	}
+
+	if (hw->rx_count >= hw->len) {
 		/* transfer completed successfully */
 		au1550_spi_mask_ack_all(hw);
 		complete(&hw->master_done);
@@ -729,6 +756,8 @@ static void __init au1550_spi_setup_psc_as_spi(struct au1550_spi *hw)
 		stat = hw->regs->psc_spistat;
 		au_sync();
 	} while ((stat & PSC_SPISTAT_DR) == 0);
+
+	au1550_spi_reset_fifos(hw);
 }
 
 
-- 
cgit v1.2.3


From e0426e6a09954d205da2d674a3d368d2715e3afd Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Wed, 23 Jul 2008 21:29:58 -0700
Subject: vt: hold console_sem across sysfs operations

Hold console sem while creating/destroying sysfs files.  Serialisation is
so far done by BKL held in tty release_dev and chrdev_open, but no other
locks are held in open path.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/vt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index e32a076d5f1..ab53a1d4d89 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2749,8 +2749,8 @@ static int con_open(struct tty_struct *tty, struct file *filp)
 				tty->termios->c_iflag |= IUTF8;
 			else
 				tty->termios->c_iflag &= ~IUTF8;
-			release_console_sem();
 			vcs_make_sysfs(tty);
+			release_console_sem();
 			return ret;
 		}
 	}
@@ -2775,8 +2775,8 @@ static void con_close(struct tty_struct *tty, struct file *filp)
 		if (vc)
 			vc->vc_tty = NULL;
 		tty->driver_data = NULL;
-		release_console_sem();
 		vcs_remove_sysfs(tty);
+		release_console_sem();
 		mutex_unlock(&tty_mutex);
 		/*
 		 * tty_mutex is released, but we still hold BKL, so there is
-- 
cgit v1.2.3


From f700d6e5e5549cb9349d22043f4bd153792c621f Mon Sep 17 00:00:00 2001
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Wed, 23 Jul 2008 21:29:59 -0700
Subject: vt: do not update when the console is blanked

vt.c DO_UPDATE macro checks if the console is visible but doesn't check if
the console is blanked.

In fact updating fbcon while the console is blanked is not only
unnecessary but can even cause screen corruption.

Therefore I am adding a simple check on console_blanked in DO_UPDATE.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/vt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index ab53a1d4d89..cb8c90da393 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -261,7 +261,7 @@ static void notify_update(struct vc_data *vc)
 #ifdef VT_BUF_VRAM_ONLY
 #define DO_UPDATE(vc)	0
 #else
-#define DO_UPDATE(vc)	CON_IS_VISIBLE(vc)
+#define DO_UPDATE(vc)	(CON_IS_VISIBLE(vc) && !console_blanked)
 #endif
 
 static inline unsigned short *screenpos(struct vc_data *vc, int offset, int viewed)
-- 
cgit v1.2.3


From 0293902a4d66fab27d0ddcc0766e05dae68f004e Mon Sep 17 00:00:00 2001
From: Wang Chen <wangchen@cn.fujitsu.com>
Date: Wed, 23 Jul 2008 21:30:01 -0700
Subject: I2O: handle sysfs_create_link() failures

Compile warning:
ignoring return value of `sysfs_create_link', declared with attribute warn_unused_result.

If sysfs_create_link failed, take care of the return value and do some
error handle after the failure.

Since sysfs_remove_link() will check whether a link exists, when removing the
link in error path, we don't need to care whether a link was created.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/message/i2o/device.c | 54 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 42 insertions(+), 12 deletions(-)

diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c
index 489d7c5c496..8774c670e66 100644
--- a/drivers/message/i2o/device.c
+++ b/drivers/message/i2o/device.c
@@ -243,29 +243,41 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
 
 	/* create user entries for this device */
 	tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid);
-	if (tmp && (tmp != i2o_dev))
-		sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj,
-				  "user");
+	if (tmp && (tmp != i2o_dev)) {
+		rc = sysfs_create_link(&i2o_dev->device.kobj,
+				       &tmp->device.kobj, "user");
+		if (rc)
+			goto unreg_dev;
+	}
 
 	/* create user entries refering to this device */
 	list_for_each_entry(tmp, &c->devices, list)
 	    if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
-		&& (tmp != i2o_dev))
-		sysfs_create_link(&tmp->device.kobj,
-				  &i2o_dev->device.kobj, "user");
+		&& (tmp != i2o_dev)) {
+		rc = sysfs_create_link(&tmp->device.kobj,
+				       &i2o_dev->device.kobj, "user");
+		if (rc)
+			goto rmlink1;
+	}
 
 	/* create parent entries for this device */
 	tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid);
-	if (tmp && (tmp != i2o_dev))
-		sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj,
-				  "parent");
+	if (tmp && (tmp != i2o_dev)) {
+		rc = sysfs_create_link(&i2o_dev->device.kobj,
+				       &tmp->device.kobj, "parent");
+		if (rc)
+			goto rmlink1;
+	}
 
 	/* create parent entries refering to this device */
 	list_for_each_entry(tmp, &c->devices, list)
 	    if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
-		&& (tmp != i2o_dev))
-		sysfs_create_link(&tmp->device.kobj,
-				  &i2o_dev->device.kobj, "parent");
+		&& (tmp != i2o_dev)) {
+		rc = sysfs_create_link(&tmp->device.kobj,
+				       &i2o_dev->device.kobj, "parent");
+		if (rc)
+			goto rmlink2;
+	}
 
 	i2o_driver_notify_device_add_all(i2o_dev);
 
@@ -273,6 +285,24 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
 
 	return 0;
 
+rmlink2:
+	/* If link creating failed halfway, we loop whole list to cleanup.
+	 * And we don't care wrong removing of link, because sysfs_remove_link
+	 * will take care of it.
+	 */
+	list_for_each_entry(tmp, &c->devices, list) {
+		if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
+			sysfs_remove_link(&tmp->device.kobj, "parent");
+	}
+	sysfs_remove_link(&i2o_dev->device.kobj, "parent");
+rmlink1:
+	list_for_each_entry(tmp, &c->devices, list)
+		if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
+			sysfs_remove_link(&tmp->device.kobj, "user");
+	sysfs_remove_link(&i2o_dev->device.kobj, "user");
+unreg_dev:
+	list_del(&i2o_dev->list);
+	device_unregister(&i2o_dev->device);
 err:
 	kfree(i2o_dev);
 	return rc;
-- 
cgit v1.2.3


From 746f1e558bc52b9693c1a1ecdab60f8392e5ff18 Mon Sep 17 00:00:00 2001
From: Michael Halcrow <mhalcrow@us.ibm.com>
Date: Wed, 23 Jul 2008 21:30:02 -0700
Subject: eCryptfs: Privileged kthread for lower file opens

eCryptfs would really like to have read-write access to all files in the
lower filesystem.  Right now, the persistent lower file may be opened
read-only if the attempt to open it read-write fails.  One way to keep
from having to do that is to have a privileged kthread that can open the
lower persistent file on behalf of the user opening the eCryptfs file;
this patch implements this functionality.

This patch will properly allow a less-privileged user to open the eCryptfs
file, followed by a more-privileged user opening the eCryptfs file, with
the first user only being able to read and the second user being able to
both read and write.  eCryptfs currently does this wrong; it will wind up
calling vfs_write() on a file that was opened read-only.  This is fixed in
this patch.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ecryptfs/Makefile          |   2 +-
 fs/ecryptfs/ecryptfs_kernel.h |  19 ++++
 fs/ecryptfs/file.c            |   7 ++
 fs/ecryptfs/kthread.c         | 203 ++++++++++++++++++++++++++++++++++++++++++
 fs/ecryptfs/main.c            |  42 ++++-----
 5 files changed, 251 insertions(+), 22 deletions(-)
 create mode 100644 fs/ecryptfs/kthread.c

diff --git a/fs/ecryptfs/Makefile b/fs/ecryptfs/Makefile
index 1e34a7fd488..b4755a85996 100644
--- a/fs/ecryptfs/Makefile
+++ b/fs/ecryptfs/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_ECRYPT_FS) += ecryptfs.o
 
-ecryptfs-objs := dentry.o file.o inode.o main.o super.o mmap.o read_write.o crypto.o keystore.o messaging.o netlink.o miscdev.o debug.o
+ecryptfs-objs := dentry.o file.o inode.o main.o super.o mmap.o read_write.o crypto.o keystore.o messaging.o netlink.o miscdev.o kthread.o debug.o
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index c15c25745e0..b4a0cccfdd7 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -559,6 +559,20 @@ extern struct kmem_cache *ecryptfs_key_record_cache;
 extern struct kmem_cache *ecryptfs_key_sig_cache;
 extern struct kmem_cache *ecryptfs_global_auth_tok_cache;
 extern struct kmem_cache *ecryptfs_key_tfm_cache;
+extern struct kmem_cache *ecryptfs_open_req_cache;
+
+struct ecryptfs_open_req {
+#define ECRYPTFS_REQ_PROCESSED 0x00000001
+#define ECRYPTFS_REQ_DROPPED   0x00000002
+#define ECRYPTFS_REQ_ZOMBIE    0x00000004
+	u32 flags;
+	struct file **lower_file;
+	struct dentry *lower_dentry;
+	struct vfsmount *lower_mnt;
+	wait_queue_head_t wait;
+	struct mutex mux;
+	struct list_head kthread_ctl_list;
+};
 
 int ecryptfs_interpose(struct dentry *hidden_dentry,
 		       struct dentry *this_dentry, struct super_block *sb,
@@ -690,5 +704,10 @@ void ecryptfs_msg_ctx_alloc_to_free(struct ecryptfs_msg_ctx *msg_ctx);
 int
 ecryptfs_spawn_daemon(struct ecryptfs_daemon **daemon, uid_t euid,
 		      struct user_namespace *user_ns, struct pid *pid);
+int ecryptfs_init_kthread(void);
+void ecryptfs_destroy_kthread(void);
+int ecryptfs_privileged_open(struct file **lower_file,
+			     struct dentry *lower_dentry,
+			     struct vfsmount *lower_mnt);
 
 #endif /* #ifndef ECRYPTFS_KERNEL_H */
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 24749bf0668..f0be2905152 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -192,6 +192,13 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
 				      | ECRYPTFS_ENCRYPTED);
 	}
 	mutex_unlock(&crypt_stat->cs_mutex);
+	if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
+	    && !(file->f_flags & O_RDONLY)) {
+		rc = -EPERM;
+		printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
+		       "file must hence be opened RO\n", __func__);
+		goto out;
+	}
 	ecryptfs_set_file_lower(
 		file, ecryptfs_inode_to_private(inode)->lower_file);
 	if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) {
diff --git a/fs/ecryptfs/kthread.c b/fs/ecryptfs/kthread.c
new file mode 100644
index 00000000000..c440c6b58b2
--- /dev/null
+++ b/fs/ecryptfs/kthread.c
@@ -0,0 +1,203 @@
+/**
+ * eCryptfs: Linux filesystem encryption layer
+ *
+ * Copyright (C) 2008 International Business Machines Corp.
+ *   Author(s): Michael A. Halcrow <mahalcro@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ */
+
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/wait.h>
+#include <linux/mount.h>
+#include "ecryptfs_kernel.h"
+
+struct kmem_cache *ecryptfs_open_req_cache;
+
+static struct ecryptfs_kthread_ctl {
+#define ECRYPTFS_KTHREAD_ZOMBIE 0x00000001
+	u32 flags;
+	struct mutex mux;
+	struct list_head req_list;
+	wait_queue_head_t wait;
+} ecryptfs_kthread_ctl;
+
+static struct task_struct *ecryptfs_kthread;
+
+/**
+ * ecryptfs_threadfn
+ * @ignored: ignored
+ *
+ * The eCryptfs kernel thread that has the responsibility of getting
+ * the lower persistent file with RW permissions.
+ *
+ * Returns zero on success; non-zero otherwise
+ */
+static int ecryptfs_threadfn(void *ignored)
+{
+	set_freezable();
+	while (1)  {
+		struct ecryptfs_open_req *req;
+
+		wait_event_freezable(
+			ecryptfs_kthread_ctl.wait,
+			(!list_empty(&ecryptfs_kthread_ctl.req_list)
+			 || kthread_should_stop()));
+		mutex_lock(&ecryptfs_kthread_ctl.mux);
+		if (ecryptfs_kthread_ctl.flags & ECRYPTFS_KTHREAD_ZOMBIE) {
+			mutex_unlock(&ecryptfs_kthread_ctl.mux);
+			goto out;
+		}
+		while (!list_empty(&ecryptfs_kthread_ctl.req_list)) {
+			req = list_first_entry(&ecryptfs_kthread_ctl.req_list,
+					       struct ecryptfs_open_req,
+					       kthread_ctl_list);
+			mutex_lock(&req->mux);
+			list_del(&req->kthread_ctl_list);
+			if (!(req->flags & ECRYPTFS_REQ_ZOMBIE)) {
+				dget(req->lower_dentry);
+				mntget(req->lower_mnt);
+				(*req->lower_file) = dentry_open(
+					req->lower_dentry, req->lower_mnt,
+					(O_RDWR | O_LARGEFILE));
+				req->flags |= ECRYPTFS_REQ_PROCESSED;
+			}
+			wake_up(&req->wait);
+			mutex_unlock(&req->mux);
+		}
+		mutex_unlock(&ecryptfs_kthread_ctl.mux);
+	}
+out:
+	return 0;
+}
+
+int ecryptfs_init_kthread(void)
+{
+	int rc = 0;
+
+	mutex_init(&ecryptfs_kthread_ctl.mux);
+	init_waitqueue_head(&ecryptfs_kthread_ctl.wait);
+	INIT_LIST_HEAD(&ecryptfs_kthread_ctl.req_list);
+	ecryptfs_kthread = kthread_run(&ecryptfs_threadfn, NULL,
+				       "ecryptfs-kthread");
+	if (IS_ERR(ecryptfs_kthread)) {
+		rc = PTR_ERR(ecryptfs_kthread);
+		printk(KERN_ERR "%s: Failed to create kernel thread; rc = [%d]"
+		       "\n", __func__, rc);
+	}
+	return rc;
+}
+
+void ecryptfs_destroy_kthread(void)
+{
+	struct ecryptfs_open_req *req;
+
+	mutex_lock(&ecryptfs_kthread_ctl.mux);
+	ecryptfs_kthread_ctl.flags |= ECRYPTFS_KTHREAD_ZOMBIE;
+	list_for_each_entry(req, &ecryptfs_kthread_ctl.req_list,
+			    kthread_ctl_list) {
+		mutex_lock(&req->mux);
+		req->flags |= ECRYPTFS_REQ_ZOMBIE;
+		wake_up(&req->wait);
+		mutex_unlock(&req->mux);
+	}
+	mutex_unlock(&ecryptfs_kthread_ctl.mux);
+	kthread_stop(ecryptfs_kthread);
+	wake_up(&ecryptfs_kthread_ctl.wait);
+}
+
+/**
+ * ecryptfs_privileged_open
+ * @lower_file: Result of dentry_open by root on lower dentry
+ * @lower_dentry: Lower dentry for file to open
+ * @lower_mnt: Lower vfsmount for file to open
+ *
+ * This function gets a r/w file opened againt the lower dentry.
+ *
+ * Returns zero on success; non-zero otherwise
+ */
+int ecryptfs_privileged_open(struct file **lower_file,
+			     struct dentry *lower_dentry,
+			     struct vfsmount *lower_mnt)
+{
+	struct ecryptfs_open_req *req;
+	int rc = 0;
+
+	/* Corresponding dput() and mntput() are done when the
+	 * persistent file is fput() when the eCryptfs inode is
+	 * destroyed. */
+	dget(lower_dentry);
+	mntget(lower_mnt);
+	(*lower_file) = dentry_open(lower_dentry, lower_mnt,
+				    (O_RDWR | O_LARGEFILE));
+	if (!IS_ERR(*lower_file))
+		goto out;
+	req = kmem_cache_alloc(ecryptfs_open_req_cache, GFP_KERNEL);
+	if (!req) {
+		rc = -ENOMEM;
+		goto out;
+	}
+	mutex_init(&req->mux);
+	req->lower_file = lower_file;
+	req->lower_dentry = lower_dentry;
+	req->lower_mnt = lower_mnt;
+	init_waitqueue_head(&req->wait);
+	req->flags = 0;
+	mutex_lock(&ecryptfs_kthread_ctl.mux);
+	if (ecryptfs_kthread_ctl.flags & ECRYPTFS_KTHREAD_ZOMBIE) {
+		rc = -EIO;
+		mutex_unlock(&ecryptfs_kthread_ctl.mux);
+		printk(KERN_ERR "%s: We are in the middle of shutting down; "
+		       "aborting privileged request to open lower file\n",
+			__func__);
+		goto out_free;
+	}
+	list_add_tail(&req->kthread_ctl_list, &ecryptfs_kthread_ctl.req_list);
+	mutex_unlock(&ecryptfs_kthread_ctl.mux);
+	wake_up(&ecryptfs_kthread_ctl.wait);
+	wait_event(req->wait, (req->flags != 0));
+	mutex_lock(&req->mux);
+	BUG_ON(req->flags == 0);
+	if (req->flags & ECRYPTFS_REQ_DROPPED
+	    || req->flags & ECRYPTFS_REQ_ZOMBIE) {
+		rc = -EIO;
+		printk(KERN_WARNING "%s: Privileged open request dropped\n",
+		       __func__);
+		goto out_unlock;
+	}
+	if (IS_ERR(*req->lower_file)) {
+		rc = PTR_ERR(*req->lower_file);
+		dget(lower_dentry);
+		mntget(lower_mnt);
+		(*lower_file) = dentry_open(lower_dentry, lower_mnt,
+					    (O_RDONLY | O_LARGEFILE));
+		if (IS_ERR(*lower_file)) {
+			rc = PTR_ERR(*req->lower_file);
+			(*lower_file) = NULL;
+			printk(KERN_WARNING "%s: Error attempting privileged "
+			       "open of lower file with either RW or RO "
+			       "perms; rc = [%d]. Giving up.\n",
+			       __func__, rc);
+		}
+	}
+out_unlock:
+	mutex_unlock(&req->mux);
+out_free:
+	kmem_cache_free(ecryptfs_open_req_cache, req);
+out:
+	return rc;
+}
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index d603631601e..f36ab2feea2 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -130,26 +130,12 @@ static int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry)
 			ecryptfs_dentry_to_lower_mnt(ecryptfs_dentry);
 
 		lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
-		/* Corresponding dput() and mntput() are done when the
-		 * persistent file is fput() when the eCryptfs inode
-		 * is destroyed. */
-		dget(lower_dentry);
-		mntget(lower_mnt);
-		inode_info->lower_file = dentry_open(lower_dentry,
-						     lower_mnt,
-						     (O_RDWR | O_LARGEFILE));
-		if (IS_ERR(inode_info->lower_file)) {
-			dget(lower_dentry);
-			mntget(lower_mnt);
-			inode_info->lower_file = dentry_open(lower_dentry,
-							     lower_mnt,
-							     (O_RDONLY
-							      | O_LARGEFILE));
-		}
-		if (IS_ERR(inode_info->lower_file)) {
+		rc = ecryptfs_privileged_open(&inode_info->lower_file,
+						     lower_dentry, lower_mnt);
+		if (rc || IS_ERR(inode_info->lower_file)) {
 			printk(KERN_ERR "Error opening lower persistent file "
-			       "for lower_dentry [0x%p] and lower_mnt [0x%p]\n",
-			       lower_dentry, lower_mnt);
+			       "for lower_dentry [0x%p] and lower_mnt [0x%p]; "
+			       "rc = [%d]\n", lower_dentry, lower_mnt, rc);
 			rc = PTR_ERR(inode_info->lower_file);
 			inode_info->lower_file = NULL;
 		}
@@ -679,6 +665,11 @@ static struct ecryptfs_cache_info {
 		.name = "ecryptfs_key_tfm_cache",
 		.size = sizeof(struct ecryptfs_key_tfm),
 	},
+	{
+		.cache = &ecryptfs_open_req_cache,
+		.name = "ecryptfs_open_req_cache",
+		.size = sizeof(struct ecryptfs_open_req),
+	},
 };
 
 static void ecryptfs_free_kmem_caches(void)
@@ -795,11 +786,17 @@ static int __init ecryptfs_init(void)
 		printk(KERN_ERR "sysfs registration failed\n");
 		goto out_unregister_filesystem;
 	}
+	rc = ecryptfs_init_kthread();
+	if (rc) {
+		printk(KERN_ERR "%s: kthread initialization failed; "
+		       "rc = [%d]\n", __func__, rc);
+		goto out_do_sysfs_unregistration;
+	}
 	rc = ecryptfs_init_messaging(ecryptfs_transport);
 	if (rc) {
-		ecryptfs_printk(KERN_ERR, "Failure occured while attempting to "
+		printk(KERN_ERR "Failure occured while attempting to "
 				"initialize the eCryptfs netlink socket\n");
-		goto out_do_sysfs_unregistration;
+		goto out_destroy_kthread;
 	}
 	rc = ecryptfs_init_crypto();
 	if (rc) {
@@ -814,6 +811,8 @@ static int __init ecryptfs_init(void)
 	goto out;
 out_release_messaging:
 	ecryptfs_release_messaging(ecryptfs_transport);
+out_destroy_kthread:
+	ecryptfs_destroy_kthread();
 out_do_sysfs_unregistration:
 	do_sysfs_unregistration();
 out_unregister_filesystem:
@@ -833,6 +832,7 @@ static void __exit ecryptfs_exit(void)
 		printk(KERN_ERR "Failure whilst attempting to destroy crypto; "
 		       "rc = [%d]\n", rc);
 	ecryptfs_release_messaging(ecryptfs_transport);
+	ecryptfs_destroy_kthread();
 	do_sysfs_unregistration();
 	unregister_filesystem(&ecryptfs_fs_type);
 	ecryptfs_free_kmem_caches();
-- 
cgit v1.2.3


From 6c4c17b073cd4a5a61bc04329561632870bb21fc Mon Sep 17 00:00:00 2001
From: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Date: Wed, 23 Jul 2008 21:30:04 -0700
Subject: ecryptfs: discard ecryptfsd registration messages in miscdev

The userspace eCryptfs daemon sends HELO and QUIT messages to the kernel
for per-user daemon (un)registration.  These messages are required when
netlink is used as the transport, but (un)registration is handled by
opening and closing the device file when miscdev is the transport.  These
messages should be discarded in the miscdev transport so that a daemon
isn't registered twice.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ecryptfs/miscdev.c | 59 ---------------------------------------------------
 1 file changed, 59 deletions(-)

diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 09a4522f65e..b484792a099 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -357,46 +357,6 @@ out_unlock_daemon:
 	return rc;
 }
 
-/**
- * ecryptfs_miscdev_helo
- * @euid: effective user id of miscdevess sending helo packet
- * @user_ns: The namespace in which @euid applies
- * @pid: miscdevess id of miscdevess sending helo packet
- *
- * Returns zero on success; non-zero otherwise
- */
-static int ecryptfs_miscdev_helo(uid_t euid, struct user_namespace *user_ns,
-				 struct pid *pid)
-{
-	int rc;
-
-	rc = ecryptfs_process_helo(ECRYPTFS_TRANSPORT_MISCDEV, euid, user_ns,
-				   pid);
-	if (rc)
-		printk(KERN_WARNING "Error processing HELO; rc = [%d]\n", rc);
-	return rc;
-}
-
-/**
- * ecryptfs_miscdev_quit
- * @euid: effective user id of miscdevess sending quit packet
- * @user_ns: The namespace in which @euid applies
- * @pid: miscdevess id of miscdevess sending quit packet
- *
- * Returns zero on success; non-zero otherwise
- */
-static int ecryptfs_miscdev_quit(uid_t euid, struct user_namespace *user_ns,
-				 struct pid *pid)
-{
-	int rc;
-
-	rc = ecryptfs_process_quit(euid, user_ns, pid);
-	if (rc)
-		printk(KERN_WARNING
-		       "Error processing QUIT message; rc = [%d]\n", rc);
-	return rc;
-}
-
 /**
  * ecryptfs_miscdev_response - miscdevess response to message previously sent to daemon
  * @data: Bytes comprising struct ecryptfs_message
@@ -512,26 +472,7 @@ ecryptfs_miscdev_write(struct file *file, const char __user *buf,
 			       __func__, rc);
 		break;
 	case ECRYPTFS_MSG_HELO:
-		rc = ecryptfs_miscdev_helo(current->euid,
-					   current->nsproxy->user_ns,
-					   task_pid(current));
-		if (rc) {
-			printk(KERN_ERR "%s: Error attempting to process "
-			       "helo from pid [0x%p]; rc = [%d]\n", __func__,
-			       task_pid(current), rc);
-			goto out_free;
-		}
-		break;
 	case ECRYPTFS_MSG_QUIT:
-		rc = ecryptfs_miscdev_quit(current->euid,
-					   current->nsproxy->user_ns,
-					   task_pid(current));
-		if (rc) {
-			printk(KERN_ERR "%s: Error attempting to process "
-			       "quit from pid [0x%p]; rc = [%d]\n", __func__,
-			       task_pid(current), rc);
-			goto out_free;
-		}
 		break;
 	default:
 		ecryptfs_printk(KERN_WARNING, "Dropping miscdev "
-- 
cgit v1.2.3


From 982363c97f8cad7aea4c3d2cfebffc1cc2d2f166 Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@redhat.com>
Date: Wed, 23 Jul 2008 21:30:04 -0700
Subject: ecryptfs: propagate key errors up at mount time

Mounting with invalid key signatures should probably fail, if they were
specifically requested but not available.

Also fix case checks in process_request_key_err() for the right sign of
the errnos, as spotted by Jan Tluka.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Tluka <jtluka@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ecryptfs/keystore.c | 9 ++++-----
 fs/ecryptfs/main.c     | 4 ++--
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index e82b457180b..f5b76a331b9 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -44,15 +44,15 @@ static int process_request_key_err(long err_code)
 	int rc = 0;
 
 	switch (err_code) {
-	case ENOKEY:
+	case -ENOKEY:
 		ecryptfs_printk(KERN_WARNING, "No key\n");
 		rc = -ENOENT;
 		break;
-	case EKEYEXPIRED:
+	case -EKEYEXPIRED:
 		ecryptfs_printk(KERN_WARNING, "Key expired\n");
 		rc = -ETIME;
 		break;
-	case EKEYREVOKED:
+	case -EKEYREVOKED:
 		ecryptfs_printk(KERN_WARNING, "Key revoked\n");
 		rc = -EINVAL;
 		break;
@@ -963,8 +963,7 @@ int ecryptfs_keyring_auth_tok_for_sig(struct key **auth_tok_key,
 	if (!(*auth_tok_key) || IS_ERR(*auth_tok_key)) {
 		printk(KERN_ERR "Could not find key with description: [%s]\n",
 		       sig);
-		process_request_key_err(PTR_ERR(*auth_tok_key));
-		rc = -EINVAL;
+		rc = process_request_key_err(PTR_ERR(*auth_tok_key));
 		goto out;
 	}
 	(*auth_tok) = ecryptfs_get_key_payload_data(*auth_tok_key);
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index f36ab2feea2..8876fe7c76e 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -248,10 +248,11 @@ static int ecryptfs_init_global_auth_toks(
 			       "session keyring for sig specified in mount "
 			       "option: [%s]\n", global_auth_tok->sig);
 			global_auth_tok->flags |= ECRYPTFS_AUTH_TOK_INVALID;
-			rc = 0;
+			goto out;
 		} else
 			global_auth_tok->flags &= ~ECRYPTFS_AUTH_TOK_INVALID;
 	}
+out:
 	return rc;
 }
 
@@ -416,7 +417,6 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options)
 		printk(KERN_WARNING "One or more global auth toks could not "
 		       "properly register; rc = [%d]\n", rc);
 	}
-	rc = 0;
 out:
 	return rc;
 }
-- 
cgit v1.2.3


From 8f2368095e25018838e1bf145041f58270ccd32e Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Wed, 23 Jul 2008 21:30:05 -0700
Subject: ecryptfs: string copy cleanup

Clean up overcomplicated string copy, which also gets rid of this
bogus warning:

fs/ecryptfs/main.c: In function 'ecryptfs_parse_options':
include/asm/arch/string_32.h:75: warning: array subscript is above array bounds

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ecryptfs/main.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 8876fe7c76e..10475d93ff5 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -301,7 +301,6 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options)
 	char *cipher_name_dst;
 	char *cipher_name_src;
 	char *cipher_key_bytes_src;
-	int cipher_name_len;
 
 	if (!options) {
 		rc = -EINVAL;
@@ -382,17 +381,12 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options)
 		goto out;
 	}
 	if (!cipher_name_set) {
-		cipher_name_len = strlen(ECRYPTFS_DEFAULT_CIPHER);
-		if (unlikely(cipher_name_len
-			     >= ECRYPTFS_MAX_CIPHER_NAME_SIZE)) {
-			rc = -EINVAL;
-			BUG();
-			goto out;
-		}
-		memcpy(mount_crypt_stat->global_default_cipher_name,
-		       ECRYPTFS_DEFAULT_CIPHER, cipher_name_len);
-		mount_crypt_stat->global_default_cipher_name[cipher_name_len]
-		    = '\0';
+		int cipher_name_len = strlen(ECRYPTFS_DEFAULT_CIPHER);
+
+		BUG_ON(cipher_name_len >= ECRYPTFS_MAX_CIPHER_NAME_SIZE);
+
+		strcpy(mount_crypt_stat->global_default_cipher_name,
+		       ECRYPTFS_DEFAULT_CIPHER);
 	}
 	if (!cipher_key_bytes_set) {
 		mount_crypt_stat->global_default_cipher_key_size = 0;
-- 
cgit v1.2.3


From 29335c6a41568d4708d4ec3b9187f9b6d302e5ea Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Wed, 23 Jul 2008 21:30:06 -0700
Subject: ecryptfs: crypto.c use unaligned byteorder helpers

Fixes the following sparse warnings:
fs/ecryptfs/crypto.c:1036:8: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1038:8: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1077:10: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1103:6: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1105:6: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1124:8: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1241:21: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1244:30: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1414:23: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1417:32: warning: cast to restricted __be16

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ecryptfs/crypto.c | 37 ++++++++++++++-----------------------
 1 file changed, 14 insertions(+), 23 deletions(-)

diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index e2832bc7869..7b99917ffad 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -33,6 +33,7 @@
 #include <linux/crypto.h>
 #include <linux/file.h>
 #include <linux/scatterlist.h>
+#include <asm/unaligned.h>
 #include "ecryptfs_kernel.h"
 
 static int
@@ -1032,10 +1033,8 @@ static int contains_ecryptfs_marker(char *data)
 {
 	u32 m_1, m_2;
 
-	memcpy(&m_1, data, 4);
-	m_1 = be32_to_cpu(m_1);
-	memcpy(&m_2, (data + 4), 4);
-	m_2 = be32_to_cpu(m_2);
+	m_1 = get_unaligned_be32(data);
+	m_2 = get_unaligned_be32(data + 4);
 	if ((m_1 ^ MAGIC_ECRYPTFS_MARKER) == m_2)
 		return 1;
 	ecryptfs_printk(KERN_DEBUG, "m_1 = [0x%.8x]; m_2 = [0x%.8x]; "
@@ -1073,8 +1072,7 @@ static int ecryptfs_process_flags(struct ecryptfs_crypt_stat *crypt_stat,
 	int i;
 	u32 flags;
 
-	memcpy(&flags, page_virt, 4);
-	flags = be32_to_cpu(flags);
+	flags = get_unaligned_be32(page_virt);
 	for (i = 0; i < ((sizeof(ecryptfs_flag_map)
 			  / sizeof(struct ecryptfs_flag_map_elem))); i++)
 		if (flags & ecryptfs_flag_map[i].file_flag) {
@@ -1100,11 +1098,9 @@ static void write_ecryptfs_marker(char *page_virt, size_t *written)
 
 	get_random_bytes(&m_1, (MAGIC_ECRYPTFS_MARKER_SIZE_BYTES / 2));
 	m_2 = (m_1 ^ MAGIC_ECRYPTFS_MARKER);
-	m_1 = cpu_to_be32(m_1);
-	memcpy(page_virt, &m_1, (MAGIC_ECRYPTFS_MARKER_SIZE_BYTES / 2));
-	m_2 = cpu_to_be32(m_2);
-	memcpy(page_virt + (MAGIC_ECRYPTFS_MARKER_SIZE_BYTES / 2), &m_2,
-	       (MAGIC_ECRYPTFS_MARKER_SIZE_BYTES / 2));
+	put_unaligned_be32(m_1, page_virt);
+	page_virt += (MAGIC_ECRYPTFS_MARKER_SIZE_BYTES / 2);
+	put_unaligned_be32(m_2, page_virt);
 	(*written) = MAGIC_ECRYPTFS_MARKER_SIZE_BYTES;
 }
 
@@ -1121,8 +1117,7 @@ write_ecryptfs_flags(char *page_virt, struct ecryptfs_crypt_stat *crypt_stat,
 			flags |= ecryptfs_flag_map[i].file_flag;
 	/* Version is in top 8 bits of the 32-bit flag vector */
 	flags |= ((((u8)crypt_stat->file_version) << 24) & 0xFF000000);
-	flags = cpu_to_be32(flags);
-	memcpy(page_virt, &flags, 4);
+	put_unaligned_be32(flags, page_virt);
 	(*written) = 4;
 }
 
@@ -1238,11 +1233,9 @@ ecryptfs_write_header_metadata(char *virt,
 	num_header_extents_at_front =
 		(u16)(crypt_stat->num_header_bytes_at_front
 		      / crypt_stat->extent_size);
-	header_extent_size = cpu_to_be32(header_extent_size);
-	memcpy(virt, &header_extent_size, 4);
+	put_unaligned_be32(header_extent_size, virt);
 	virt += 4;
-	num_header_extents_at_front = cpu_to_be16(num_header_extents_at_front);
-	memcpy(virt, &num_header_extents_at_front, 2);
+	put_unaligned_be16(num_header_extents_at_front, virt);
 	(*written) = 6;
 }
 
@@ -1410,15 +1403,13 @@ static int parse_header_metadata(struct ecryptfs_crypt_stat *crypt_stat,
 	u32 header_extent_size;
 	u16 num_header_extents_at_front;
 
-	memcpy(&header_extent_size, virt, sizeof(u32));
-	header_extent_size = be32_to_cpu(header_extent_size);
-	virt += sizeof(u32);
-	memcpy(&num_header_extents_at_front, virt, sizeof(u16));
-	num_header_extents_at_front = be16_to_cpu(num_header_extents_at_front);
+	header_extent_size = get_unaligned_be32(virt);
+	virt += sizeof(__be32);
+	num_header_extents_at_front = get_unaligned_be16(virt);
 	crypt_stat->num_header_bytes_at_front =
 		(((size_t)num_header_extents_at_front
 		  * (size_t)header_extent_size));
-	(*bytes_read) = (sizeof(u32) + sizeof(u16));
+	(*bytes_read) = (sizeof(__be32) + sizeof(__be16));
 	if ((validate_header_size == ECRYPTFS_VALIDATE_HEADER_SIZE)
 	    && (crypt_stat->num_header_bytes_at_front
 		< ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE)) {
-- 
cgit v1.2.3


From 0a688ad713949643e201431d3f4a4ceddfeb70ca Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Wed, 23 Jul 2008 21:30:07 -0700
Subject: ecryptfs: inode.c mmap.c use unaligned byteorder helpers

Fixe sparse warnings:
fs/ecryptfs/inode.c:368:15: warning: cast to restricted __be64
fs/ecryptfs/mmap.c:385:12: warning: incorrect type in assignment (different base types)
fs/ecryptfs/mmap.c:385:12:    expected unsigned long long [unsigned] [assigned] [usertype] file_size
fs/ecryptfs/mmap.c:385:12:    got restricted __be64 [usertype] <noident>
fs/ecryptfs/mmap.c:428:12: warning: incorrect type in assignment (different base types)
fs/ecryptfs/mmap.c:428:12:    expected unsigned long long [unsigned] [assigned] [usertype] file_size
fs/ecryptfs/mmap.c:428:12:    got restricted __be64 [usertype] <noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ecryptfs/inode.c |  4 ++--
 fs/ecryptfs/mmap.c  | 11 +++--------
 2 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index c92cc1c00aa..7315547193e 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -31,6 +31,7 @@
 #include <linux/mount.h>
 #include <linux/crypto.h>
 #include <linux/fs_stack.h>
+#include <asm/unaligned.h>
 #include "ecryptfs_kernel.h"
 
 static struct dentry *lock_parent(struct dentry *dentry)
@@ -364,8 +365,7 @@ static struct dentry *ecryptfs_lookup(struct inode *dir, struct dentry *dentry,
 		else
 			file_size = i_size_read(lower_dentry->d_inode);
 	} else {
-		memcpy(&file_size, page_virt, sizeof(file_size));
-		file_size = be64_to_cpu(file_size);
+		file_size = get_unaligned_be64(page_virt);
 	}
 	i_size_write(dentry->d_inode, (loff_t)file_size);
 	kmem_cache_free(ecryptfs_header_cache_2, page_virt);
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index 2b6fe1e6e8b..245c2dc02d5 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -32,6 +32,7 @@
 #include <linux/file.h>
 #include <linux/crypto.h>
 #include <linux/scatterlist.h>
+#include <asm/unaligned.h>
 #include "ecryptfs_kernel.h"
 
 /**
@@ -372,7 +373,6 @@ out:
  */
 static int ecryptfs_write_inode_size_to_header(struct inode *ecryptfs_inode)
 {
-	u64 file_size;
 	char *file_size_virt;
 	int rc;
 
@@ -381,9 +381,7 @@ static int ecryptfs_write_inode_size_to_header(struct inode *ecryptfs_inode)
 		rc = -ENOMEM;
 		goto out;
 	}
-	file_size = (u64)i_size_read(ecryptfs_inode);
-	file_size = cpu_to_be64(file_size);
-	memcpy(file_size_virt, &file_size, sizeof(u64));
+	put_unaligned_be64(i_size_read(ecryptfs_inode), file_size_virt);
 	rc = ecryptfs_write_lower(ecryptfs_inode, file_size_virt, 0,
 				  sizeof(u64));
 	kfree(file_size_virt);
@@ -403,7 +401,6 @@ static int ecryptfs_write_inode_size_to_xattr(struct inode *ecryptfs_inode)
 	struct dentry *lower_dentry =
 		ecryptfs_inode_to_private(ecryptfs_inode)->lower_file->f_dentry;
 	struct inode *lower_inode = lower_dentry->d_inode;
-	u64 file_size;
 	int rc;
 
 	if (!lower_inode->i_op->getxattr || !lower_inode->i_op->setxattr) {
@@ -424,9 +421,7 @@ static int ecryptfs_write_inode_size_to_xattr(struct inode *ecryptfs_inode)
 					   xattr_virt, PAGE_CACHE_SIZE);
 	if (size < 0)
 		size = 8;
-	file_size = (u64)i_size_read(ecryptfs_inode);
-	file_size = cpu_to_be64(file_size);
-	memcpy(xattr_virt, &file_size, sizeof(u64));
+	put_unaligned_be64(i_size_read(ecryptfs_inode), xattr_virt);
 	rc = lower_inode->i_op->setxattr(lower_dentry, ECRYPTFS_XATTR_NAME,
 					 xattr_virt, size, 0);
 	mutex_unlock(&lower_inode->i_mutex);
-- 
cgit v1.2.3


From 72b55fffd631a89e5be6fe1b4f2565bc4cd90deb Mon Sep 17 00:00:00 2001
From: Michael Halcrow <mhalcrow@us.ibm.com>
Date: Wed, 23 Jul 2008 21:30:07 -0700
Subject: eCryptfs: do not try to open device files on mknod

When creating device nodes, eCryptfs needs to delay actually opening the lower
persistent file until an application tries to open.  Device handles may not be
backed by anything when they first come into existence.

[Valdis.Kletnieks@vt.edu: build fix]
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <Valdis.Kletnieks@vt.edu}
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ecryptfs/ecryptfs_kernel.h |  6 +++++-
 fs/ecryptfs/file.c            | 14 ++++++++++++++
 fs/ecryptfs/inode.c           |  6 ++++--
 fs/ecryptfs/main.c            | 29 +++++++++++++++++++----------
 4 files changed, 42 insertions(+), 13 deletions(-)

diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index b4a0cccfdd7..b0727f91454 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -235,6 +235,7 @@ struct ecryptfs_crypt_stat {
 #define ECRYPTFS_METADATA_IN_XATTR  0x00000100
 #define ECRYPTFS_VIEW_AS_ENCRYPTED  0x00000200
 #define ECRYPTFS_KEY_SET            0x00000400
+#define ECRYPTFS_DELAY_PERSISTENT   0x00000800
 	u32 flags;
 	unsigned int file_version;
 	size_t iv_bytes;
@@ -574,9 +575,11 @@ struct ecryptfs_open_req {
 	struct list_head kthread_ctl_list;
 };
 
+#define ECRYPTFS_INTERPOSE_FLAG_D_ADD                 0x00000001
+#define ECRYPTFS_INTERPOSE_FLAG_DELAY_PERSISTENT_FILE 0x00000002
 int ecryptfs_interpose(struct dentry *hidden_dentry,
 		       struct dentry *this_dentry, struct super_block *sb,
-		       int flag);
+		       u32 flags);
 int ecryptfs_fill_zeros(struct file *file, loff_t new_length);
 int ecryptfs_decode_filename(struct ecryptfs_crypt_stat *crypt_stat,
 			     const char *name, int length,
@@ -709,5 +712,6 @@ void ecryptfs_destroy_kthread(void);
 int ecryptfs_privileged_open(struct file **lower_file,
 			     struct dentry *lower_dentry,
 			     struct vfsmount *lower_mnt);
+int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry);
 
 #endif /* #ifndef ECRYPTFS_KERNEL_H */
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index f0be2905152..2c2d60df3f6 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -199,6 +199,20 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
 		       "file must hence be opened RO\n", __func__);
 		goto out;
 	}
+	if (!ecryptfs_inode_to_private(inode)->lower_file) {
+		BUG_ON(!(crypt_stat->flags & ECRYPTFS_DELAY_PERSISTENT));
+		mutex_lock(&crypt_stat->cs_mutex);
+		crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
+		mutex_unlock(&crypt_stat->cs_mutex);
+		rc = ecryptfs_init_persistent_file(ecryptfs_dentry);
+		if (rc) {
+			printk(KERN_ERR "%s: Error attempting to initialize "
+			       "the persistent file for the dentry with name "
+			       "[%s]; rc = [%d]\n", __func__,
+			       ecryptfs_dentry->d_name.name, rc);
+			goto out;
+		}
+	}
 	ecryptfs_set_file_lower(
 		file, ecryptfs_inode_to_private(inode)->lower_file);
 	if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) {
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 7315547193e..26090878c93 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -308,7 +308,8 @@ static struct dentry *ecryptfs_lookup(struct inode *dir, struct dentry *dentry,
 		d_add(dentry, NULL);
 		goto out;
 	}
-	rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb, 1);
+	rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb,
+				ECRYPTFS_INTERPOSE_FLAG_D_ADD);
 	if (rc) {
 		ecryptfs_printk(KERN_ERR, "Error interposing\n");
 		goto out_dput;
@@ -537,7 +538,8 @@ ecryptfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
 	rc = vfs_mknod(lower_dir_dentry->d_inode, lower_dentry, mode, dev);
 	if (rc || !lower_dentry->d_inode)
 		goto out;
-	rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb, 0);
+	rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb,
+				ECRYPTFS_INTERPOSE_FLAG_DELAY_PERSISTENT_FILE);
 	if (rc)
 		goto out;
 	fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 10475d93ff5..ee4f84b2041 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -117,7 +117,7 @@ void __ecryptfs_printk(const char *fmt, ...)
  *
  * Returns zero on success; non-zero otherwise
  */
-static int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry)
+int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry)
 {
 	struct ecryptfs_inode_info *inode_info =
 		ecryptfs_inode_to_private(ecryptfs_dentry->d_inode);
@@ -149,14 +149,14 @@ static int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry)
  * @lower_dentry: Existing dentry in the lower filesystem
  * @dentry: ecryptfs' dentry
  * @sb: ecryptfs's super_block
- * @flag: If set to true, then d_add is called, else d_instantiate is called
+ * @flags: flags to govern behavior of interpose procedure
  *
  * Interposes upper and lower dentries.
  *
  * Returns zero on success; non-zero otherwise
  */
 int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry,
-		       struct super_block *sb, int flag)
+		       struct super_block *sb, u32 flags)
 {
 	struct inode *lower_inode;
 	struct inode *inode;
@@ -193,7 +193,7 @@ int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry,
 		init_special_inode(inode, lower_inode->i_mode,
 				   lower_inode->i_rdev);
 	dentry->d_op = &ecryptfs_dops;
-	if (flag)
+	if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
 		d_add(dentry, inode);
 	else
 		d_instantiate(dentry, inode);
@@ -201,12 +201,21 @@ int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry,
 	/* This size will be overwritten for real files w/ headers and
 	 * other metadata */
 	fsstack_copy_inode_size(inode, lower_inode);
-	rc = ecryptfs_init_persistent_file(dentry);
-	if (rc) {
-		printk(KERN_ERR "%s: Error attempting to initialize the "
-		       "persistent file for the dentry with name [%s]; "
-		       "rc = [%d]\n", __func__, dentry->d_name.name, rc);
-		goto out;
+	if (!(flags & ECRYPTFS_INTERPOSE_FLAG_DELAY_PERSISTENT_FILE)) {
+		rc = ecryptfs_init_persistent_file(dentry);
+		if (rc) {
+			printk(KERN_ERR "%s: Error attempting to initialize "
+			       "the persistent file for the dentry with name "
+			       "[%s]; rc = [%d]\n", __func__,
+			       dentry->d_name.name, rc);
+			goto out;
+		}
+	} else {
+		struct ecryptfs_inode_info *inode_info =
+			ecryptfs_inode_to_private(dentry->d_inode);
+
+		inode_info->lower_file = NULL;
+		inode_info->crypt_stat.flags |= ECRYPTFS_DELAY_PERSISTENT;
 	}
 out:
 	return rc;
-- 
cgit v1.2.3


From 391b52f98cf2e9bff227dad8bf9ea206fec43fa4 Mon Sep 17 00:00:00 2001
From: Michael Halcrow <mhalcrow@us.ibm.com>
Date: Wed, 23 Jul 2008 21:30:08 -0700
Subject: eCryptfs: Make all persistent file opens delayed

There is no good reason to immediately open the lower file, and that can
cause problems with files that the user does not intend to immediately
open, such as device nodes.

This patch removes the persistent file open from the interpose step and
pushes that to the locations where eCryptfs really does need the lower
persistent file, such as just before reading or writing the metadata
stored in the lower file header.

Two functions are jumping to out_dput when they should just be jumping to
out on error paths.  This patch also fixes these.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ecryptfs/ecryptfs_kernel.h |  2 --
 fs/ecryptfs/file.c            |  4 ----
 fs/ecryptfs/inode.c           | 27 +++++++++++++++++++++++----
 fs/ecryptfs/main.c            | 16 ----------------
 4 files changed, 23 insertions(+), 26 deletions(-)

diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index b0727f91454..b73fb752c5f 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -235,7 +235,6 @@ struct ecryptfs_crypt_stat {
 #define ECRYPTFS_METADATA_IN_XATTR  0x00000100
 #define ECRYPTFS_VIEW_AS_ENCRYPTED  0x00000200
 #define ECRYPTFS_KEY_SET            0x00000400
-#define ECRYPTFS_DELAY_PERSISTENT   0x00000800
 	u32 flags;
 	unsigned int file_version;
 	size_t iv_bytes;
@@ -576,7 +575,6 @@ struct ecryptfs_open_req {
 };
 
 #define ECRYPTFS_INTERPOSE_FLAG_D_ADD                 0x00000001
-#define ECRYPTFS_INTERPOSE_FLAG_DELAY_PERSISTENT_FILE 0x00000002
 int ecryptfs_interpose(struct dentry *hidden_dentry,
 		       struct dentry *this_dentry, struct super_block *sb,
 		       u32 flags);
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 2c2d60df3f6..9244d653743 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -200,10 +200,6 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 	if (!ecryptfs_inode_to_private(inode)->lower_file) {
-		BUG_ON(!(crypt_stat->flags & ECRYPTFS_DELAY_PERSISTENT));
-		mutex_lock(&crypt_stat->cs_mutex);
-		crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
-		mutex_unlock(&crypt_stat->cs_mutex);
 		rc = ecryptfs_init_persistent_file(ecryptfs_dentry);
 		if (rc) {
 			printk(KERN_ERR "%s: Error attempting to initialize "
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 26090878c93..d755455e3bf 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -189,6 +189,16 @@ static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry)
 				"context; rc = [%d]\n", rc);
 		goto out;
 	}
+	if (!ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->lower_file) {
+		rc = ecryptfs_init_persistent_file(ecryptfs_dentry);
+		if (rc) {
+			printk(KERN_ERR "%s: Error attempting to initialize "
+			       "the persistent file for the dentry with name "
+			       "[%s]; rc = [%d]\n", __func__,
+			       ecryptfs_dentry->d_name.name, rc);
+			goto out;
+		}
+	}
 	rc = ecryptfs_write_metadata(ecryptfs_dentry);
 	if (rc) {
 		printk(KERN_ERR "Error writing headers; rc = [%d]\n", rc);
@@ -312,7 +322,7 @@ static struct dentry *ecryptfs_lookup(struct inode *dir, struct dentry *dentry,
 				ECRYPTFS_INTERPOSE_FLAG_D_ADD);
 	if (rc) {
 		ecryptfs_printk(KERN_ERR, "Error interposing\n");
-		goto out_dput;
+		goto out;
 	}
 	if (S_ISDIR(lower_inode->i_mode)) {
 		ecryptfs_printk(KERN_DEBUG, "Is a directory; returning\n");
@@ -338,11 +348,21 @@ static struct dentry *ecryptfs_lookup(struct inode *dir, struct dentry *dentry,
 		rc = -ENOMEM;
 		ecryptfs_printk(KERN_ERR,
 				"Cannot ecryptfs_kmalloc a page\n");
-		goto out_dput;
+		goto out;
 	}
 	crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
 	if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED))
 		ecryptfs_set_default_sizes(crypt_stat);
+	if (!ecryptfs_inode_to_private(dentry->d_inode)->lower_file) {
+		rc = ecryptfs_init_persistent_file(dentry);
+		if (rc) {
+			printk(KERN_ERR "%s: Error attempting to initialize "
+			       "the persistent file for the dentry with name "
+			       "[%s]; rc = [%d]\n", __func__,
+			       dentry->d_name.name, rc);
+			goto out;
+		}
+	}
 	rc = ecryptfs_read_and_validate_header_region(page_virt,
 						      dentry->d_inode);
 	if (rc) {
@@ -538,8 +558,7 @@ ecryptfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
 	rc = vfs_mknod(lower_dir_dentry->d_inode, lower_dentry, mode, dev);
 	if (rc || !lower_dentry->d_inode)
 		goto out;
-	rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb,
-				ECRYPTFS_INTERPOSE_FLAG_DELAY_PERSISTENT_FILE);
+	rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb, 0);
 	if (rc)
 		goto out;
 	fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index ee4f84b2041..6f403cfba14 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -201,22 +201,6 @@ int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry,
 	/* This size will be overwritten for real files w/ headers and
 	 * other metadata */
 	fsstack_copy_inode_size(inode, lower_inode);
-	if (!(flags & ECRYPTFS_INTERPOSE_FLAG_DELAY_PERSISTENT_FILE)) {
-		rc = ecryptfs_init_persistent_file(dentry);
-		if (rc) {
-			printk(KERN_ERR "%s: Error attempting to initialize "
-			       "the persistent file for the dentry with name "
-			       "[%s]; rc = [%d]\n", __func__,
-			       dentry->d_name.name, rc);
-			goto out;
-		}
-	} else {
-		struct ecryptfs_inode_info *inode_info =
-			ecryptfs_inode_to_private(dentry->d_inode);
-
-		inode_info->lower_file = NULL;
-		inode_info->crypt_stat.flags |= ECRYPTFS_DELAY_PERSISTENT;
-	}
 out:
 	return rc;
 }
-- 
cgit v1.2.3


From 5f6f4f28b6ba543beef8bad91aa6f69c7ffeee51 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:09 -0700
Subject: autofs4: don't make expiring dentry negative

Correct the error of making a positive dentry negative after it has been
instantiated.

The code that makes this error attempts to re-use the dentry from a
concurrent expire and mount to resolve a race and the dentry used for the
lookup must be negative for mounts to trigger in the required cases.  The
fact is that the dentry doesn't need to be re-used because all that is
needed is to preserve the flag that indicates an expire is still
incomplete at the time of the mount request.

This change uses the the dentry to check the flag and wait for the expire
to complete then discards it instead of attempting to re-use it.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/autofs_i.h |   6 +--
 fs/autofs4/inode.c    |   6 +--
 fs/autofs4/root.c     | 118 ++++++++++++++++++++------------------------------
 3 files changed, 52 insertions(+), 78 deletions(-)

diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index c3d352d7fa9..69b1497b002 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -52,7 +52,7 @@ struct autofs_info {
 
 	int		flags;
 
-	struct list_head rehash;
+	struct list_head expiring;
 
 	struct autofs_sb_info *sbi;
 	unsigned long last_used;
@@ -112,8 +112,8 @@ struct autofs_sb_info {
 	struct mutex wq_mutex;
 	spinlock_t fs_lock;
 	struct autofs_wait_queue *queues; /* Wait queue pointer */
-	spinlock_t rehash_lock;
-	struct list_head rehash_list;
+	spinlock_t lookup_lock;
+	struct list_head expiring_list;
 };
 
 static inline struct autofs_sb_info *autofs4_sbi(struct super_block *sb)
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index 2fdcf5e1d23..94bfc154d7a 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -47,7 +47,7 @@ struct autofs_info *autofs4_init_ino(struct autofs_info *ino,
 	ino->dentry = NULL;
 	ino->size = 0;
 
-	INIT_LIST_HEAD(&ino->rehash);
+	INIT_LIST_HEAD(&ino->expiring);
 
 	ino->last_used = jiffies;
 	atomic_set(&ino->count, 0);
@@ -338,8 +338,8 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent)
 	mutex_init(&sbi->wq_mutex);
 	spin_lock_init(&sbi->fs_lock);
 	sbi->queues = NULL;
-	spin_lock_init(&sbi->rehash_lock);
-	INIT_LIST_HEAD(&sbi->rehash_list);
+	spin_lock_init(&sbi->lookup_lock);
+	INIT_LIST_HEAD(&sbi->expiring_list);
 	s->s_blocksize = 1024;
 	s->s_blocksize_bits = 10;
 	s->s_magic = AUTOFS_SUPER_MAGIC;
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index edf5b6bddb5..9ead2279df4 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -493,10 +493,10 @@ void autofs4_dentry_release(struct dentry *de)
 		struct autofs_sb_info *sbi = autofs4_sbi(de->d_sb);
 
 		if (sbi) {
-			spin_lock(&sbi->rehash_lock);
-			if (!list_empty(&inf->rehash))
-				list_del(&inf->rehash);
-			spin_unlock(&sbi->rehash_lock);
+			spin_lock(&sbi->lookup_lock);
+			if (!list_empty(&inf->expiring))
+				list_del(&inf->expiring);
+			spin_unlock(&sbi->lookup_lock);
 		}
 
 		inf->dentry = NULL;
@@ -518,7 +518,7 @@ static struct dentry_operations autofs4_dentry_operations = {
 	.d_release	= autofs4_dentry_release,
 };
 
-static struct dentry *autofs4_lookup_unhashed(struct autofs_sb_info *sbi, struct dentry *parent, struct qstr *name)
+static struct dentry *autofs4_lookup_expiring(struct autofs_sb_info *sbi, struct dentry *parent, struct qstr *name)
 {
 	unsigned int len = name->len;
 	unsigned int hash = name->hash;
@@ -526,14 +526,14 @@ static struct dentry *autofs4_lookup_unhashed(struct autofs_sb_info *sbi, struct
 	struct list_head *p, *head;
 
 	spin_lock(&dcache_lock);
-	spin_lock(&sbi->rehash_lock);
-	head = &sbi->rehash_list;
+	spin_lock(&sbi->lookup_lock);
+	head = &sbi->expiring_list;
 	list_for_each(p, head) {
 		struct autofs_info *ino;
 		struct dentry *dentry;
 		struct qstr *qstr;
 
-		ino = list_entry(p, struct autofs_info, rehash);
+		ino = list_entry(p, struct autofs_info, expiring);
 		dentry = ino->dentry;
 
 		spin_lock(&dentry->d_lock);
@@ -555,33 +555,16 @@ static struct dentry *autofs4_lookup_unhashed(struct autofs_sb_info *sbi, struct
 			goto next;
 
 		if (d_unhashed(dentry)) {
-			struct inode *inode = dentry->d_inode;
-
-			ino = autofs4_dentry_ino(dentry);
-			list_del_init(&ino->rehash);
 			dget(dentry);
-			/*
-			 * Make the rehashed dentry negative so the VFS
-			 * behaves as it should.
-			 */
-			if (inode) {
-				dentry->d_inode = NULL;
-				list_del_init(&dentry->d_alias);
-				spin_unlock(&dentry->d_lock);
-				spin_unlock(&sbi->rehash_lock);
-				spin_unlock(&dcache_lock);
-				iput(inode);
-				return dentry;
-			}
 			spin_unlock(&dentry->d_lock);
-			spin_unlock(&sbi->rehash_lock);
+			spin_unlock(&sbi->lookup_lock);
 			spin_unlock(&dcache_lock);
 			return dentry;
 		}
 next:
 		spin_unlock(&dentry->d_lock);
 	}
-	spin_unlock(&sbi->rehash_lock);
+	spin_unlock(&sbi->lookup_lock);
 	spin_unlock(&dcache_lock);
 
 	return NULL;
@@ -591,7 +574,7 @@ next:
 static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
 {
 	struct autofs_sb_info *sbi;
-	struct dentry *unhashed;
+	struct dentry *expiring;
 	int oz_mode;
 
 	DPRINTK("name = %.*s",
@@ -607,44 +590,44 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 	DPRINTK("pid = %u, pgrp = %u, catatonic = %d, oz_mode = %d",
 		 current->pid, task_pgrp_nr(current), sbi->catatonic, oz_mode);
 
-	unhashed = autofs4_lookup_unhashed(sbi, dentry->d_parent, &dentry->d_name);
-	if (!unhashed) {
-		/*
-		 * Mark the dentry incomplete but don't hash it. We do this
-		 * to serialize our inode creation operations (symlink and
-		 * mkdir) which prevents deadlock during the callback to
-		 * the daemon. Subsequent user space lookups for the same
-		 * dentry are placed on the wait queue while the daemon
-		 * itself is allowed passage unresticted so the create
-		 * operation itself can then hash the dentry. Finally,
-		 * we check for the hashed dentry and return the newly
-		 * hashed dentry.
-		 */
-		dentry->d_op = &autofs4_root_dentry_operations;
-
-		dentry->d_fsdata = NULL;
-		d_instantiate(dentry, NULL);
-	} else {
-		struct autofs_info *ino = autofs4_dentry_ino(unhashed);
-		DPRINTK("rehash %p with %p", dentry, unhashed);
+	expiring = autofs4_lookup_expiring(sbi, dentry->d_parent, &dentry->d_name);
+	if (expiring) {
+		struct autofs_info *ino = autofs4_dentry_ino(expiring);
 		/*
 		 * If we are racing with expire the request might not
 		 * be quite complete but the directory has been removed
 		 * so it must have been successful, so just wait for it.
-		 * We need to ensure the AUTOFS_INF_EXPIRING flag is clear
-		 * before continuing as revalidate may fail when calling
-		 * try_to_fill_dentry (returning EAGAIN) if we don't.
 		 */
 		while (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
 			DPRINTK("wait for incomplete expire %p name=%.*s",
-				unhashed, unhashed->d_name.len,
-				unhashed->d_name.name);
-			autofs4_wait(sbi, unhashed, NFY_NONE);
+				expiring, expiring->d_name.len,
+				expiring->d_name.name);
+			autofs4_wait(sbi, expiring, NFY_NONE);
 			DPRINTK("request completed");
 		}
-		dentry = unhashed;
+		spin_lock(&sbi->lookup_lock);
+		if (!list_empty(&ino->expiring))
+			list_del_init(&ino->expiring);
+		spin_unlock(&sbi->lookup_lock);
+		dput(expiring);
 	}
 
+	/*
+	 * Mark the dentry incomplete but don't hash it. We do this
+	 * to serialize our inode creation operations (symlink and
+	 * mkdir) which prevents deadlock during the callback to
+	 * the daemon. Subsequent user space lookups for the same
+	 * dentry are placed on the wait queue while the daemon
+	 * itself is allowed passage unresticted so the create
+	 * operation itself can then hash the dentry. Finally,
+	 * we check for the hashed dentry and return the newly
+	 * hashed dentry.
+	 */
+	dentry->d_op = &autofs4_root_dentry_operations;
+
+	dentry->d_fsdata = NULL;
+	d_instantiate(dentry, NULL);
+
 	if (!oz_mode) {
 		spin_lock(&dentry->d_lock);
 		dentry->d_flags |= DCACHE_AUTOFS_PENDING;
@@ -668,8 +651,6 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 			if (sigismember (sigset, SIGKILL) ||
 			    sigismember (sigset, SIGQUIT) ||
 			    sigismember (sigset, SIGINT)) {
-			    if (unhashed)
-				dput(unhashed);
 			    return ERR_PTR(-ERESTARTNOINTR);
 			}
 		}
@@ -699,15 +680,9 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 		else
 			dentry = ERR_PTR(-ENOENT);
 
-		if (unhashed)
-			dput(unhashed);
-
 		return dentry;
 	}
 
-	if (unhashed)
-		return dentry;
-
 	return NULL;
 }
 
@@ -769,9 +744,8 @@ static int autofs4_dir_symlink(struct inode *dir,
  * that the file no longer exists. However, doing that means that the
  * VFS layer can turn the dentry into a negative dentry.  We don't want
  * this, because the unlink is probably the result of an expire.
- * We simply d_drop it and add it to a rehash candidates list in the
- * super block, which allows the dentry lookup to reuse it retaining
- * the flags, such as expire in progress, in case we're racing with expire.
+ * We simply d_drop it and add it to a expiring list in the super block,
+ * which allows the dentry lookup to check for an incomplete expire.
  *
  * If a process is blocked on the dentry waiting for the expire to finish,
  * it will invalidate the dentry and try to mount with a new one.
@@ -801,9 +775,9 @@ static int autofs4_dir_unlink(struct inode *dir, struct dentry *dentry)
 	dir->i_mtime = CURRENT_TIME;
 
 	spin_lock(&dcache_lock);
-	spin_lock(&sbi->rehash_lock);
-	list_add(&ino->rehash, &sbi->rehash_list);
-	spin_unlock(&sbi->rehash_lock);
+	spin_lock(&sbi->lookup_lock);
+	list_add(&ino->expiring, &sbi->expiring_list);
+	spin_unlock(&sbi->lookup_lock);
 	spin_lock(&dentry->d_lock);
 	__d_drop(dentry);
 	spin_unlock(&dentry->d_lock);
@@ -829,9 +803,9 @@ static int autofs4_dir_rmdir(struct inode *dir, struct dentry *dentry)
 		spin_unlock(&dcache_lock);
 		return -ENOTEMPTY;
 	}
-	spin_lock(&sbi->rehash_lock);
-	list_add(&ino->rehash, &sbi->rehash_list);
-	spin_unlock(&sbi->rehash_lock);
+	spin_lock(&sbi->lookup_lock);
+	list_add(&ino->expiring, &sbi->expiring_list);
+	spin_unlock(&sbi->lookup_lock);
 	spin_lock(&dentry->d_lock);
 	__d_drop(dentry);
 	spin_unlock(&dentry->d_lock);
-- 
cgit v1.2.3


From caf7da3d5d4d9dd873eb52d025d8cc63b89f1fdb Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:11 -0700
Subject: autofs4: revert - redo lookup in ttfd

This patch series enables the use of a single dentry for lookups prior to
the dentry being hashed and so we no longer need to redo the lookup.  This
patch reverts the patch of commit
033790449ba9c4dcf8478a87693d33df625c23b5.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/root.c | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 9ead2279df4..53dabe8d5b8 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -242,7 +242,6 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 {
 	struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
 	struct autofs_info *ino = autofs4_dentry_ino(dentry);
-	struct dentry *new;
 	int status;
 
 	/* Block on any pending expiry here; invalidate the dentry
@@ -320,26 +319,6 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 	dentry->d_flags &= ~DCACHE_AUTOFS_PENDING;
 	spin_unlock(&dentry->d_lock);
 
-	/*
-	 * The dentry that is passed in from lookup may not be the one
-	 * we end up using, as mkdir can create a new one.  If this
-	 * happens, and another process tries the lookup at the same time,
-	 * it will set the PENDING flag on this new dentry, but add itself
-	 * to our waitq.  Then, if after the lookup succeeds, the first
-	 * process that requested the mount performs another lookup of the
-	 * same directory, it will show up as still pending!  So, we need
-	 * to redo the lookup here and clear pending on that dentry.
-	 */
-	if (d_unhashed(dentry)) {
-		new = d_lookup(dentry->d_parent, &dentry->d_name);
-		if (new) {
-			spin_lock(&new->d_lock);
-			new->d_flags &= ~DCACHE_AUTOFS_PENDING;
-			spin_unlock(&new->d_lock);
-			dput(new);
-		}
-	}
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From 2576737873dc1d9ea461a5955a5f6779b569a350 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:12 -0700
Subject: autofs4: use look aside list for lookups

A while ago a patch to resolve a deadlock during directory creation was
merged.  This delayed the hashing of lookup dentrys until the ->mkdir()
(or ->symlink()) operation completed to ensure we always went through
->lookup() instead of also having processes go through ->revalidate() so
our VFS locking remained consistent.

Now we are seeing a couple of side affects of that change in situations
with heavy mount activity.

Two cases have been identified:

1) When a mount request is triggered, due to the delayed hashing, the
   directory created by user space for the mount point doesn't have the
   DCACHE_AUTOFS_PENDING flag set.  In the case of an autofs multi-mount
   where a tree of mount point directories are created this can lead to
   the path walk continuing rather than the dentry being sent to the wait
   queue to wait for request completion.  This is because, if the pending
   flag isn't set, the criteria for deciding this is a mount in progress
   fails to hold, namely that the dentry is not a mount point and has no
   subdirectories.

2) A mount request dentry is initially created negative and unhashed.
   It remains this way until the ->mkdir() callback completes.  Since it
   is unhashed a fresh dentry is used when the user space mount request
   creates the mount point directory.  This leaves the original dentry
   negative and unhashed.  But revalidate has no way to tell the VFS that
   the dentry has changed, other than to force another ->lookup() by
   returning false, which is at best wastefull and at worst not possible.
   This results in an -ENOENT return from the original path walk when in
   fact the mount succeeded.

To resolve this we need to ensure that the same dentry is used in all
calls to ->lookup() during the course of a mount request.  This patch
achieves that by adding the initial dentry to a look aside list and
removes it at ->mkdir() or ->symlink() completion (or when the dentry is
released), since these are the only create operations autofs4 supports.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/autofs_i.h |   2 +
 fs/autofs4/inode.c    |  25 +++++---
 fs/autofs4/root.c     | 169 +++++++++++++++++++++++++++++++++++++++++---------
 3 files changed, 156 insertions(+), 40 deletions(-)

diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index 69b1497b002..2dce2334737 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -52,6 +52,7 @@ struct autofs_info {
 
 	int		flags;
 
+	struct list_head active;
 	struct list_head expiring;
 
 	struct autofs_sb_info *sbi;
@@ -113,6 +114,7 @@ struct autofs_sb_info {
 	spinlock_t fs_lock;
 	struct autofs_wait_queue *queues; /* Wait queue pointer */
 	spinlock_t lookup_lock;
+	struct list_head active_list;
 	struct list_head expiring_list;
 };
 
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index 94bfc154d7a..e3e70994ab4 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -24,8 +24,10 @@
 
 static void ino_lnkfree(struct autofs_info *ino)
 {
-	kfree(ino->u.symlink);
-	ino->u.symlink = NULL;
+	if (ino->u.symlink) {
+		kfree(ino->u.symlink);
+		ino->u.symlink = NULL;
+	}
 }
 
 struct autofs_info *autofs4_init_ino(struct autofs_info *ino,
@@ -41,16 +43,18 @@ struct autofs_info *autofs4_init_ino(struct autofs_info *ino,
 	if (ino == NULL)
 		return NULL;
 
-	ino->flags = 0;
-	ino->mode = mode;
-	ino->inode = NULL;
-	ino->dentry = NULL;
-	ino->size = 0;
-
-	INIT_LIST_HEAD(&ino->expiring);
+	if (!reinit) {
+		ino->flags = 0;
+		ino->inode = NULL;
+		ino->dentry = NULL;
+		ino->size = 0;
+		INIT_LIST_HEAD(&ino->active);
+		INIT_LIST_HEAD(&ino->expiring);
+		atomic_set(&ino->count, 0);
+	}
 
+	ino->mode = mode;
 	ino->last_used = jiffies;
-	atomic_set(&ino->count, 0);
 
 	ino->sbi = sbi;
 
@@ -339,6 +343,7 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent)
 	spin_lock_init(&sbi->fs_lock);
 	sbi->queues = NULL;
 	spin_lock_init(&sbi->lookup_lock);
+	INIT_LIST_HEAD(&sbi->active_list);
 	INIT_LIST_HEAD(&sbi->expiring_list);
 	s->s_blocksize = 1024;
 	s->s_blocksize_bits = 10;
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 53dabe8d5b8..dbb70d5a488 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -473,6 +473,8 @@ void autofs4_dentry_release(struct dentry *de)
 
 		if (sbi) {
 			spin_lock(&sbi->lookup_lock);
+			if (!list_empty(&inf->active))
+				list_del(&inf->active);
 			if (!list_empty(&inf->expiring))
 				list_del(&inf->expiring);
 			spin_unlock(&sbi->lookup_lock);
@@ -497,6 +499,58 @@ static struct dentry_operations autofs4_dentry_operations = {
 	.d_release	= autofs4_dentry_release,
 };
 
+static struct dentry *autofs4_lookup_active(struct autofs_sb_info *sbi, struct dentry *parent, struct qstr *name)
+{
+	unsigned int len = name->len;
+	unsigned int hash = name->hash;
+	const unsigned char *str = name->name;
+	struct list_head *p, *head;
+
+	spin_lock(&dcache_lock);
+	spin_lock(&sbi->lookup_lock);
+	head = &sbi->active_list;
+	list_for_each(p, head) {
+		struct autofs_info *ino;
+		struct dentry *dentry;
+		struct qstr *qstr;
+
+		ino = list_entry(p, struct autofs_info, active);
+		dentry = ino->dentry;
+
+		spin_lock(&dentry->d_lock);
+
+		/* Already gone? */
+		if (atomic_read(&dentry->d_count) == 0)
+			goto next;
+
+		qstr = &dentry->d_name;
+
+		if (dentry->d_name.hash != hash)
+			goto next;
+		if (dentry->d_parent != parent)
+			goto next;
+
+		if (qstr->len != len)
+			goto next;
+		if (memcmp(qstr->name, str, len))
+			goto next;
+
+		if (d_unhashed(dentry)) {
+			dget(dentry);
+			spin_unlock(&dentry->d_lock);
+			spin_unlock(&sbi->lookup_lock);
+			spin_unlock(&dcache_lock);
+			return dentry;
+		}
+next:
+		spin_unlock(&dentry->d_lock);
+	}
+	spin_unlock(&sbi->lookup_lock);
+	spin_unlock(&dcache_lock);
+
+	return NULL;
+}
+
 static struct dentry *autofs4_lookup_expiring(struct autofs_sb_info *sbi, struct dentry *parent, struct qstr *name)
 {
 	unsigned int len = name->len;
@@ -553,7 +607,8 @@ next:
 static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
 {
 	struct autofs_sb_info *sbi;
-	struct dentry *expiring;
+	struct autofs_info *ino;
+	struct dentry *expiring, *unhashed;
 	int oz_mode;
 
 	DPRINTK("name = %.*s",
@@ -571,12 +626,12 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 
 	expiring = autofs4_lookup_expiring(sbi, dentry->d_parent, &dentry->d_name);
 	if (expiring) {
-		struct autofs_info *ino = autofs4_dentry_ino(expiring);
 		/*
 		 * If we are racing with expire the request might not
 		 * be quite complete but the directory has been removed
 		 * so it must have been successful, so just wait for it.
 		 */
+		ino = autofs4_dentry_ino(expiring);
 		while (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
 			DPRINTK("wait for incomplete expire %p name=%.*s",
 				expiring, expiring->d_name.len,
@@ -591,21 +646,41 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 		dput(expiring);
 	}
 
-	/*
-	 * Mark the dentry incomplete but don't hash it. We do this
-	 * to serialize our inode creation operations (symlink and
-	 * mkdir) which prevents deadlock during the callback to
-	 * the daemon. Subsequent user space lookups for the same
-	 * dentry are placed on the wait queue while the daemon
-	 * itself is allowed passage unresticted so the create
-	 * operation itself can then hash the dentry. Finally,
-	 * we check for the hashed dentry and return the newly
-	 * hashed dentry.
-	 */
-	dentry->d_op = &autofs4_root_dentry_operations;
+	unhashed = autofs4_lookup_active(sbi, dentry->d_parent, &dentry->d_name);
+	if (unhashed)
+		dentry = unhashed;
+	else {
+		/*
+		 * Mark the dentry incomplete but don't hash it. We do this
+		 * to serialize our inode creation operations (symlink and
+		 * mkdir) which prevents deadlock during the callback to
+		 * the daemon. Subsequent user space lookups for the same
+		 * dentry are placed on the wait queue while the daemon
+		 * itself is allowed passage unresticted so the create
+		 * operation itself can then hash the dentry. Finally,
+		 * we check for the hashed dentry and return the newly
+		 * hashed dentry.
+		 */
+		dentry->d_op = &autofs4_root_dentry_operations;
+
+		/*
+		 * And we need to ensure that the same dentry is used for
+		 * all following lookup calls until it is hashed so that
+		 * the dentry flags are persistent throughout the request.
+		 */
+		ino = autofs4_init_ino(NULL, sbi, 0555);
+		if (!ino)
+			return ERR_PTR(-ENOMEM);
+
+		dentry->d_fsdata = ino;
+		ino->dentry = dentry;
+
+		spin_lock(&sbi->lookup_lock);
+		list_add(&ino->active, &sbi->active_list);
+		spin_unlock(&sbi->lookup_lock);
 
-	dentry->d_fsdata = NULL;
-	d_instantiate(dentry, NULL);
+		d_instantiate(dentry, NULL);
+	}
 
 	if (!oz_mode) {
 		spin_lock(&dentry->d_lock);
@@ -630,12 +705,16 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 			if (sigismember (sigset, SIGKILL) ||
 			    sigismember (sigset, SIGQUIT) ||
 			    sigismember (sigset, SIGINT)) {
+			    if (unhashed)
+				dput(unhashed);
 			    return ERR_PTR(-ERESTARTNOINTR);
 			}
 		}
-		spin_lock(&dentry->d_lock);
-		dentry->d_flags &= ~DCACHE_AUTOFS_PENDING;
-		spin_unlock(&dentry->d_lock);
+		if (!oz_mode) {
+			spin_lock(&dentry->d_lock);
+			dentry->d_flags &= ~DCACHE_AUTOFS_PENDING;
+			spin_unlock(&dentry->d_lock);
+		}
 	}
 
 	/*
@@ -659,9 +738,15 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 		else
 			dentry = ERR_PTR(-ENOENT);
 
+		if (unhashed)
+			dput(unhashed);
+
 		return dentry;
 	}
 
+	if (unhashed)
+		return unhashed;
+
 	return NULL;
 }
 
@@ -682,20 +767,30 @@ static int autofs4_dir_symlink(struct inode *dir,
 		return -EACCES;
 
 	ino = autofs4_init_ino(ino, sbi, S_IFLNK | 0555);
-	if (ino == NULL)
-		return -ENOSPC;
+	if (!ino)
+		return -ENOMEM;
 
-	ino->size = strlen(symname);
-	ino->u.symlink = cp = kmalloc(ino->size + 1, GFP_KERNEL);
+	spin_lock(&sbi->lookup_lock);
+	if (!list_empty(&ino->active))
+		list_del_init(&ino->active);
+	spin_unlock(&sbi->lookup_lock);
 
-	if (cp == NULL) {
-		kfree(ino);
-		return -ENOSPC;
+	cp = kmalloc(ino->size + 1, GFP_KERNEL);
+	if (!cp) {
+		if (!dentry->d_fsdata)
+			kfree(ino);
+		return -ENOMEM;
 	}
 
 	strcpy(cp, symname);
 
 	inode = autofs4_get_inode(dir->i_sb, ino);
+	if (!inode) {
+		kfree(cp);
+		if (!dentry->d_fsdata)
+			kfree(ino);
+		return -ENOMEM;
+	}
 	d_add(dentry, inode);
 
 	if (dir == dir->i_sb->s_root->d_inode)
@@ -711,6 +806,8 @@ static int autofs4_dir_symlink(struct inode *dir,
 		atomic_inc(&p_ino->count);
 	ino->inode = inode;
 
+	ino->size = strlen(symname);
+	ino->u.symlink = cp;
 	dir->i_mtime = CURRENT_TIME;
 
 	return 0;
@@ -755,7 +852,8 @@ static int autofs4_dir_unlink(struct inode *dir, struct dentry *dentry)
 
 	spin_lock(&dcache_lock);
 	spin_lock(&sbi->lookup_lock);
-	list_add(&ino->expiring, &sbi->expiring_list);
+	if (list_empty(&ino->expiring))
+		list_add(&ino->expiring, &sbi->expiring_list);
 	spin_unlock(&sbi->lookup_lock);
 	spin_lock(&dentry->d_lock);
 	__d_drop(dentry);
@@ -783,7 +881,8 @@ static int autofs4_dir_rmdir(struct inode *dir, struct dentry *dentry)
 		return -ENOTEMPTY;
 	}
 	spin_lock(&sbi->lookup_lock);
-	list_add(&ino->expiring, &sbi->expiring_list);
+	if (list_empty(&ino->expiring))
+		list_add(&ino->expiring, &sbi->expiring_list);
 	spin_unlock(&sbi->lookup_lock);
 	spin_lock(&dentry->d_lock);
 	__d_drop(dentry);
@@ -819,10 +918,20 @@ static int autofs4_dir_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 		dentry, dentry->d_name.len, dentry->d_name.name);
 
 	ino = autofs4_init_ino(ino, sbi, S_IFDIR | 0555);
-	if (ino == NULL)
-		return -ENOSPC;
+	if (!ino)
+		return -ENOMEM;
+
+	spin_lock(&sbi->lookup_lock);
+	if (!list_empty(&ino->active))
+		list_del_init(&ino->active);
+	spin_unlock(&sbi->lookup_lock);
 
 	inode = autofs4_get_inode(dir->i_sb, ino);
+	if (!inode) {
+		if (!dentry->d_fsdata)
+			kfree(ino);
+		return -ENOMEM;
+	}
 	d_add(dentry, inode);
 
 	if (dir == dir->i_sb->s_root->d_inode)
-- 
cgit v1.2.3


From ef581a742874ebc4c28d24b374c78b762144ebdc Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:13 -0700
Subject: autofs4: fix symlink name allocation

The length of the symlink name has been moved but it needs to be set
before allocating space for it in the dentry info struct.  This corrects a
mistake in a recent patch.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/root.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index dbb70d5a488..324290c6827 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -775,6 +775,7 @@ static int autofs4_dir_symlink(struct inode *dir,
 		list_del_init(&ino->active);
 	spin_unlock(&sbi->lookup_lock);
 
+	ino->size = strlen(symname);
 	cp = kmalloc(ino->size + 1, GFP_KERNEL);
 	if (!cp) {
 		if (!dentry->d_fsdata)
@@ -806,7 +807,6 @@ static int autofs4_dir_symlink(struct inode *dir,
 		atomic_inc(&p_ino->count);
 	ino->inode = inode;
 
-	ino->size = strlen(symname);
 	ino->u.symlink = cp;
 	dir->i_mtime = CURRENT_TIME;
 
-- 
cgit v1.2.3


From c432c2586a0811c7d0030d78f0993568bc889a6f Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:14 -0700
Subject: autofs4: don't release directory mutex if called in oz_mode

Since we now delay hashing of dentrys until the ->mkdir() call, droping
and re-taking the directory mutex within the ->lookup() function when we
are being called by user space is not needed.  This can lead to a race
when other processes are attempting to access the same directory during
mount point directory creation.

In this case we need to hang onto the mutex to ensure we don't get user
processes trying to create a mount request for a newly created dentry
after the mount point entry has already been created.  This ensures that
when we need to check a dentry passed to autofs4_wait(), if it is hashed,
it is always the mount point dentry and not a new dentry created by
another lookup during directory creation.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/root.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 324290c6827..1e901e5ea01 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -686,12 +686,11 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 		spin_lock(&dentry->d_lock);
 		dentry->d_flags |= DCACHE_AUTOFS_PENDING;
 		spin_unlock(&dentry->d_lock);
-	}
-
-	if (dentry->d_op && dentry->d_op->d_revalidate) {
-		mutex_unlock(&dir->i_mutex);
-		(dentry->d_op->d_revalidate)(dentry, nd);
-		mutex_lock(&dir->i_mutex);
+		if (dentry->d_op && dentry->d_op->d_revalidate) {
+			mutex_unlock(&dir->i_mutex);
+			(dentry->d_op->d_revalidate)(dentry, nd);
+			mutex_lock(&dir->i_mutex);
+		}
 	}
 
 	/*
-- 
cgit v1.2.3


From 6d5cb926fa0162b1e62f37c117cc7ce763cfcbb9 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:15 -0700
Subject: autofs4: use lookup intent flags to trigger mounts

When an open(2) call is made on an autofs mount point directory that
already exists and the O_DIRECTORY flag is not used the needed mount
callback to the daemon is not done. This leads to the path walk
continuing resulting in a callback to the daemon with an incorrect
key. open(2) is called without O_DIRECTORY by the "find" utility but
this should be handled properly anyway.

This happens because autofs needs to use the lookup flags to decide
when to callback to the daemon to perform a mount to prevent mount
storms. For example, an autofs indirect mount map that has the "browse"
option will have the mount point directories are pre-created and the
stat(2) call made by a color ls against each directory will cause all
these directories to be mounted. It is unfortunate we need to resort
to this but mount maps can be quite large. Additionally, if a user
manually umounts an autofs indirect mount the directory isn't removed
which also leads to this situation.

To resolve this autofs needs to use the lookup intent flags to enable
it to make this decision. This patch adds this check and triggers a
call back if any of the lookup intent flags are set as all these calls
warrant a mount attempt be requested.

I know that external VFS code which uses the lookup flags is something
that the VFS would like to eliminate but I have no choice as I can't
see any other way to do this. A VFS dentry or inode operation callback
which returns the lookup "type" (requires a definition) would be
sufficient. But this change is needed now and I'm not aware of the form
that coming VFS changes will take so I'm not willing to propose anything
along these lines.

If anyone can provide an alternate method I would be happy to use it.

[akpm@linux-foundation.org: fix build for concurrent VFS changes]
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/root.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 1e901e5ea01..87352654ff4 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -31,6 +31,9 @@ static int autofs4_root_readdir(struct file * filp, void * dirent, filldir_t fil
 static struct dentry *autofs4_lookup(struct inode *,struct dentry *, struct nameidata *);
 static void *autofs4_follow_link(struct dentry *, struct nameidata *);
 
+#define TRIGGER_FLAGS   (LOOKUP_CONTINUE | LOOKUP_DIRECTORY)
+#define TRIGGER_INTENTS (LOOKUP_OPEN | LOOKUP_CREATE)
+
 const struct file_operations autofs4_root_operations = {
 	.open		= dcache_dir_open,
 	.release	= dcache_dir_close,
@@ -291,7 +294,7 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 			return status;
 		}
 	/* Trigger mount for path component or follow link */
-	} else if (flags & (LOOKUP_CONTINUE | LOOKUP_DIRECTORY) ||
+	} else if (flags & (TRIGGER_FLAGS | TRIGGER_INTENTS) ||
 			current->link_count) {
 		DPRINTK("waiting for mount name=%.*s",
 			dentry->d_name.len, dentry->d_name.name);
@@ -336,7 +339,7 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 		nd->flags);
 
 	/* If it's our master or we shouldn't trigger a mount we're done */
-	lookup_type = nd->flags & (LOOKUP_CONTINUE | LOOKUP_DIRECTORY);
+	lookup_type = nd->flags & (TRIGGER_FLAGS | TRIGGER_INTENTS);
 	if (oz_mode || !lookup_type)
 		goto done;
 
-- 
cgit v1.2.3


From 70b52a0a5005ce6a0ceec56e97222437a0ba7506 Mon Sep 17 00:00:00 2001
From: Jeff Moyer <jmoyer@redhat.com>
Date: Wed, 23 Jul 2008 21:30:16 -0700
Subject: autofs4: use struct qstr in waitq.c

The autofs_wait_queue already contains all of the fields of the
struct qstr, so change it into a qstr.

This patch, from Jeff Moyer, has been modified a liitle by myself.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/autofs_i.h |  4 +--
 fs/autofs4/waitq.c    | 86 +++++++++++++++++++++++++++------------------------
 2 files changed, 46 insertions(+), 44 deletions(-)

diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index 2dce2334737..da8882ff31e 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -75,9 +75,7 @@ struct autofs_wait_queue {
 	struct autofs_wait_queue *next;
 	autofs_wqt_t wait_queue_token;
 	/* We use the following to see what we are waiting for */
-	unsigned int hash;
-	unsigned int len;
-	char *name;
+	struct qstr name;
 	u32 dev;
 	u64 ino;
 	uid_t uid;
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 75e5955c3f6..5208cfb1df4 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -36,8 +36,10 @@ void autofs4_catatonic_mode(struct autofs_sb_info *sbi)
 	while (wq) {
 		nwq = wq->next;
 		wq->status = -ENOENT; /* Magic is gone - report failure */
-		kfree(wq->name);
-		wq->name = NULL;
+		if (wq->name.name) {
+			kfree(wq->name.name);
+			wq->name.name = NULL;
+		}
 		wake_up_interruptible(&wq->queue);
 		wq = nwq;
 	}
@@ -92,7 +94,7 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
 	size_t pktsz;
 
 	DPRINTK("wait id = 0x%08lx, name = %.*s, type=%d",
-		wq->wait_queue_token, wq->len, wq->name, type);
+		wq->wait_queue_token, wq->name.len, wq->name.name, type);
 
 	memset(&pkt,0,sizeof pkt); /* For security reasons */
 
@@ -107,9 +109,9 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
 		pktsz = sizeof(*mp);
 
 		mp->wait_queue_token = wq->wait_queue_token;
-		mp->len = wq->len;
-		memcpy(mp->name, wq->name, wq->len);
-		mp->name[wq->len] = '\0';
+		mp->len = wq->name.len;
+		memcpy(mp->name, wq->name.name, wq->name.len);
+		mp->name[wq->name.len] = '\0';
 		break;
 	}
 	case autofs_ptype_expire_multi:
@@ -119,9 +121,9 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
 		pktsz = sizeof(*ep);
 
 		ep->wait_queue_token = wq->wait_queue_token;
-		ep->len = wq->len;
-		memcpy(ep->name, wq->name, wq->len);
-		ep->name[wq->len] = '\0';
+		ep->len = wq->name.len;
+		memcpy(ep->name, wq->name.name, wq->name.len);
+		ep->name[wq->name.len] = '\0';
 		break;
 	}
 	/*
@@ -138,9 +140,9 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
 		pktsz = sizeof(*packet);
 
 		packet->wait_queue_token = wq->wait_queue_token;
-		packet->len = wq->len;
-		memcpy(packet->name, wq->name, wq->len);
-		packet->name[wq->len] = '\0';
+		packet->len = wq->name.len;
+		memcpy(packet->name, wq->name.name, wq->name.len);
+		packet->name[wq->name.len] = '\0';
 		packet->dev = wq->dev;
 		packet->ino = wq->ino;
 		packet->uid = wq->uid;
@@ -191,15 +193,15 @@ static int autofs4_getpath(struct autofs_sb_info *sbi,
 }
 
 static struct autofs_wait_queue *
-autofs4_find_wait(struct autofs_sb_info *sbi,
-		  char *name, unsigned int hash, unsigned int len)
+autofs4_find_wait(struct autofs_sb_info *sbi, struct qstr *qstr)
 {
 	struct autofs_wait_queue *wq;
 
 	for (wq = sbi->queues; wq; wq = wq->next) {
-		if (wq->hash == hash &&
-		    wq->len == len &&
-		    wq->name && !memcmp(wq->name, name, len))
+		if (wq->name.hash == qstr->hash &&
+		    wq->name.len == qstr->len &&
+		    wq->name.name &&
+			 !memcmp(wq->name.name, qstr->name, qstr->len))
 			break;
 	}
 	return wq;
@@ -210,9 +212,8 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 {
 	struct autofs_info *ino;
 	struct autofs_wait_queue *wq;
+	struct qstr qstr;
 	char *name;
-	unsigned int len = 0;
-	unsigned int hash = 0;
 	int status, type;
 
 	/* In catatonic mode, we don't wait for nobody */
@@ -225,22 +226,23 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 
 	/* If this is a direct mount request create a dummy name */
 	if (IS_ROOT(dentry) && (sbi->type & AUTOFS_TYPE_DIRECT))
-		len = sprintf(name, "%p", dentry);
+		qstr.len = sprintf(name, "%p", dentry);
 	else {
-		len = autofs4_getpath(sbi, dentry, &name);
-		if (!len) {
+		qstr.len = autofs4_getpath(sbi, dentry, &name);
+		if (!qstr.len) {
 			kfree(name);
 			return -ENOENT;
 		}
 	}
-	hash = full_name_hash(name, len);
+	qstr.name = name;
+	qstr.hash = full_name_hash(name, qstr.len);
 
 	if (mutex_lock_interruptible(&sbi->wq_mutex)) {
-		kfree(name);
+		kfree(qstr.name);
 		return -EINTR;
 	}
 
-	wq = autofs4_find_wait(sbi, name, hash, len);
+	wq = autofs4_find_wait(sbi, &qstr);
 	ino = autofs4_dentry_ino(dentry);
 	if (!wq && ino && notify == NFY_NONE) {
 		/*
@@ -254,10 +256,10 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 			mutex_unlock(&sbi->wq_mutex);
 			schedule_timeout_interruptible(HZ/10);
 			if (mutex_lock_interruptible(&sbi->wq_mutex)) {
-				kfree(name);
+				kfree(qstr.name);
 				return -EINTR;
 			}
-			wq = autofs4_find_wait(sbi, name, hash, len);
+			wq = autofs4_find_wait(sbi, &qstr);
 			if (wq)
 				break;
 		}
@@ -268,7 +270,7 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		 * return status of the wait.
 		 */
 		if (!wq) {
-			kfree(name);
+			kfree(qstr.name);
 			mutex_unlock(&sbi->wq_mutex);
 			return 0;
 		}
@@ -278,7 +280,7 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		/* Create a new wait queue */
 		wq = kmalloc(sizeof(struct autofs_wait_queue),GFP_KERNEL);
 		if (!wq) {
-			kfree(name);
+			kfree(qstr.name);
 			mutex_unlock(&sbi->wq_mutex);
 			return -ENOMEM;
 		}
@@ -289,9 +291,7 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		wq->next = sbi->queues;
 		sbi->queues = wq;
 		init_waitqueue_head(&wq->queue);
-		wq->hash = hash;
-		wq->name = name;
-		wq->len = len;
+		memcpy(&wq->name, &qstr, sizeof(struct qstr));
 		wq->dev = autofs4_get_dev(sbi);
 		wq->ino = autofs4_get_ino(sbi);
 		wq->uid = current->uid;
@@ -319,16 +319,18 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		}
 
 		DPRINTK("new wait id = 0x%08lx, name = %.*s, nfy=%d\n",
-			(unsigned long) wq->wait_queue_token, wq->len, wq->name, notify);
+			(unsigned long) wq->wait_queue_token, wq->name.len,
+			wq->name.name, notify);
 
 		/* autofs4_notify_daemon() may block */
 		autofs4_notify_daemon(sbi, wq, type);
 	} else {
 		atomic_inc(&wq->wait_ctr);
 		mutex_unlock(&sbi->wq_mutex);
-		kfree(name);
+		kfree(qstr.name);
 		DPRINTK("existing wait id = 0x%08lx, name = %.*s, nfy=%d",
-			(unsigned long) wq->wait_queue_token, wq->len, wq->name, notify);
+			(unsigned long) wq->wait_queue_token, wq->name.len,
+			wq->name.name, notify);
 	}
 
 	/* wq->name is NULL if and only if the lock is already released */
@@ -336,11 +338,13 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 	if (sbi->catatonic) {
 		/* We might have slept, so check again for catatonic mode */
 		wq->status = -ENOENT;
-		kfree(wq->name);
-		wq->name = NULL;
+		if (wq->name.name) {
+			kfree(wq->name.name);
+			wq->name.name = NULL;
+		}
 	}
 
-	if (wq->name) {
+	if (wq->name.name) {
 		/* Block all but "shutdown" signals while waiting */
 		sigset_t oldset;
 		unsigned long irqflags;
@@ -351,7 +355,7 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		recalc_sigpending();
 		spin_unlock_irqrestore(&current->sighand->siglock, irqflags);
 
-		wait_event_interruptible(wq->queue, wq->name == NULL);
+		wait_event_interruptible(wq->queue, wq->name.name == NULL);
 
 		spin_lock_irqsave(&current->sighand->siglock, irqflags);
 		current->blocked = oldset;
@@ -388,8 +392,8 @@ int autofs4_wait_release(struct autofs_sb_info *sbi, autofs_wqt_t wait_queue_tok
 
 	*wql = wq->next;	/* Unlink from chain */
 	mutex_unlock(&sbi->wq_mutex);
-	kfree(wq->name);
-	wq->name = NULL;	/* Do not wait on this queue */
+	kfree(wq->name.name);
+	wq->name.name = NULL;	/* Do not wait on this queue */
 
 	wq->status = status;
 
-- 
cgit v1.2.3


From 5a11d4d0ee1ff284271f7265929d07ea4a1168a6 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:17 -0700
Subject: autofs4: fix waitq locking

The autofs4_catatonic_mode() function accesses the wait queue without any
locking but can be called at any time.  This could lead to a possible
double free of the name field of the wait and a double fput of the daemon
communication pipe or an fput of a NULL file pointer.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/inode.c |  4 ++--
 fs/autofs4/waitq.c | 23 ++++++++++++-----------
 2 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index e3e70994ab4..7bb3e5ba053 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -163,8 +163,8 @@ void autofs4_kill_sb(struct super_block *sb)
 	if (!sbi)
 		goto out_kill_sb;
 
-	if (!sbi->catatonic)
-		autofs4_catatonic_mode(sbi); /* Free wait queues, close pipe */
+	/* Free wait queues, close pipe */
+	autofs4_catatonic_mode(sbi);
 
 	/* Clean up and release dangling references */
 	autofs4_force_release(sbi);
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 5208cfb1df4..55aac10cf32 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -28,6 +28,12 @@ void autofs4_catatonic_mode(struct autofs_sb_info *sbi)
 {
 	struct autofs_wait_queue *wq, *nwq;
 
+	mutex_lock(&sbi->wq_mutex);
+	if (sbi->catatonic) {
+		mutex_unlock(&sbi->wq_mutex);
+		return;
+	}
+
 	DPRINTK("entering catatonic mode");
 
 	sbi->catatonic = 1;
@@ -45,6 +51,8 @@ void autofs4_catatonic_mode(struct autofs_sb_info *sbi)
 	}
 	fput(sbi->pipe);	/* Close the pipe */
 	sbi->pipe = NULL;
+	sbi->pipefd = -1;
+	mutex_unlock(&sbi->wq_mutex);
 }
 
 static int autofs4_write(struct file *file, const void *addr, int bytes)
@@ -333,17 +341,10 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 			wq->name.name, notify);
 	}
 
-	/* wq->name is NULL if and only if the lock is already released */
-
-	if (sbi->catatonic) {
-		/* We might have slept, so check again for catatonic mode */
-		wq->status = -ENOENT;
-		if (wq->name.name) {
-			kfree(wq->name.name);
-			wq->name.name = NULL;
-		}
-	}
-
+	/*
+	 * wq->name.name is NULL iff the lock is already released
+	 * or the mount has been made catatonic.
+	 */
 	if (wq->name.name) {
 		/* Block all but "shutdown" signals while waiting */
 		sigset_t oldset;
-- 
cgit v1.2.3


From a1362fe92f1bde687b3a9e93d6b8d105d0a84f74 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:19 -0700
Subject: autofs4: fix pending mount race

Close a race between a pending mount that is about to finish and a new
lookup for the same directory.

Process P1 triggers a mount of directory foo.  It sets
DCACHE_AUTOFS_PENDING in the ->lookup routine, creates a waitq entry for
'foo', and calls out to the daemon to perform the mount.  The autofs
daemon will then create the directory 'foo', using a new dentry that will
be hashed in the dcache.

Before the mount completes, another process, P2, tries to walk into the
'foo' directory.  The vfs path walking code finds an entry for 'foo' and
calls the revalidate method.  Revalidate finds that the entry is not
PENDING (because PENDING was never set on the dentry created by the
mkdir), but it does find the directory is empty.  Revalidate calls
try_to_fill_dentry, which sets the PENDING flag and then calls into the
autofs4 wait code to trigger or wait for a mount of 'foo'.  The wait code
finds the entry for 'foo' and goes to sleep waiting for the completion of
the mount.

Yet another process, P3, tries to walk into the 'foo' directory.  This
process again finds a dentry in the dcache for 'foo', and calls into the
autofs revalidate code.

The revalidate code finds that the PENDING flag is set, and so calls
try_to_fill_dentry.

a) try_to_fill_dentry sets the PENDING flag redundantly for this
   dentry, then calls into the autofs4 wait code.

b) the autofs4 wait code takes the waitq mutex and searches for an
   entry for 'foo'

Between a and b, P1 is woken up because the mount completed.  P1 takes the
wait queue mutex, clears the PENDING flag from the dentry, and removes the
waitqueue entry for 'foo' from the list.

When it releases the waitq mutex, P3 (eventually) acquires it.  At this
time, it looks for an existing waitq for 'foo', finds none, and so creates
a new one and calls out to the daemon to mount the 'foo' directory.

Now, the reason that three processes are required to trigger this race is
that, because the PENDING flag is not set on the dentry created by mkdir,
the window for the race would be way to slim for it to ever occur.
Basically, between the testing of d_mountpoint(dentry) and the taking of
the waitq mutex, the mount would have to complete and the daemon would
have to be woken up, and that in turn would have to wake up P1.  This is
simply impossible.  Add the third process, though, and it becomes slightly
more likely.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/waitq.c | 135 ++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 97 insertions(+), 38 deletions(-)

diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 55aac10cf32..cd3b2a67169 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -215,19 +215,106 @@ autofs4_find_wait(struct autofs_sb_info *sbi, struct qstr *qstr)
 	return wq;
 }
 
+/*
+ * Check if we have a valid request.
+ * Returns
+ * 1 if the request should continue.
+ *   In this case we can return an autofs_wait_queue entry if one is
+ *   found or NULL to idicate a new wait needs to be created.
+ * 0 or a negative errno if the request shouldn't continue.
+ */
+static int validate_request(struct autofs_wait_queue **wait,
+			    struct autofs_sb_info *sbi,
+			    struct qstr *qstr,
+			    struct dentry*dentry, enum autofs_notify notify)
+{
+	struct autofs_wait_queue *wq;
+	struct autofs_info *ino;
+
+	/* Wait in progress, continue; */
+	wq = autofs4_find_wait(sbi, qstr);
+	if (wq) {
+		*wait = wq;
+		return 1;
+	}
+
+	*wait = NULL;
+
+	/* If we don't yet have any info this is a new request */
+	ino = autofs4_dentry_ino(dentry);
+	if (!ino)
+		return 1;
+
+	/*
+	 * If we've been asked to wait on an existing expire (NFY_NONE)
+	 * but there is no wait in the queue ...
+	 */
+	if (notify == NFY_NONE) {
+		/*
+		 * Either we've betean the pending expire to post it's
+		 * wait or it finished while we waited on the mutex.
+		 * So we need to wait till either, the wait appears
+		 * or the expire finishes.
+		 */
+
+		while (ino->flags & AUTOFS_INF_EXPIRING) {
+			mutex_unlock(&sbi->wq_mutex);
+			schedule_timeout_interruptible(HZ/10);
+			if (mutex_lock_interruptible(&sbi->wq_mutex))
+				return -EINTR;
+
+			wq = autofs4_find_wait(sbi, qstr);
+			if (wq) {
+				*wait = wq;
+				return 1;
+			}
+		}
+
+		/*
+		 * Not ideal but the status has already gone. Of the two
+		 * cases where we wait on NFY_NONE neither depend on the
+		 * return status of the wait.
+		 */
+		return 0;
+	}
+
+	/*
+	 * If we've been asked to trigger a mount and the request
+	 * completed while we waited on the mutex ...
+	 */
+	if (notify == NFY_MOUNT) {
+		/*
+		 * If the dentry isn't hashed just go ahead and try the
+		 * mount again with a new wait (not much else we can do).
+		*/
+		if (!d_unhashed(dentry)) {
+			/*
+			 * But if the dentry is hashed, that means that we
+			 * got here through the revalidate path.  Thus, we
+			 * need to check if the dentry has been mounted
+			 * while we waited on the wq_mutex. If it has,
+			 * simply return success.
+			 */
+			if (d_mountpoint(dentry))
+				return 0;
+		}
+	}
+
+	return 1;
+}
+
 int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		enum autofs_notify notify)
 {
-	struct autofs_info *ino;
 	struct autofs_wait_queue *wq;
 	struct qstr qstr;
 	char *name;
-	int status, type;
+	int status, ret, type;
 
 	/* In catatonic mode, we don't wait for nobody */
 	if (sbi->catatonic)
 		return -ENOENT;
-	
+
 	name = kmalloc(NAME_MAX + 1, GFP_KERNEL);
 	if (!name)
 		return -ENOMEM;
@@ -245,43 +332,15 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 	qstr.name = name;
 	qstr.hash = full_name_hash(name, qstr.len);
 
-	if (mutex_lock_interruptible(&sbi->wq_mutex)) {
-		kfree(qstr.name);
+	if (mutex_lock_interruptible(&sbi->wq_mutex))
 		return -EINTR;
-	}
-
-	wq = autofs4_find_wait(sbi, &qstr);
-	ino = autofs4_dentry_ino(dentry);
-	if (!wq && ino && notify == NFY_NONE) {
-		/*
-		 * Either we've betean the pending expire to post it's
-		 * wait or it finished while we waited on the mutex.
-		 * So we need to wait till either, the wait appears
-		 * or the expire finishes.
-		 */
 
-		while (ino->flags & AUTOFS_INF_EXPIRING) {
-			mutex_unlock(&sbi->wq_mutex);
-			schedule_timeout_interruptible(HZ/10);
-			if (mutex_lock_interruptible(&sbi->wq_mutex)) {
-				kfree(qstr.name);
-				return -EINTR;
-			}
-			wq = autofs4_find_wait(sbi, &qstr);
-			if (wq)
-				break;
-		}
-
-		/*
-		 * Not ideal but the status has already gone. Of the two
-		 * cases where we wait on NFY_NONE neither depend on the
-		 * return status of the wait.
-		 */
-		if (!wq) {
-			kfree(qstr.name);
+	ret = validate_request(&wq, sbi, &qstr, dentry, notify);
+	if (ret <= 0) {
+		if (ret == 0)
 			mutex_unlock(&sbi->wq_mutex);
-			return 0;
-		}
+		kfree(qstr.name);
+		return ret;
 	}
 
 	if (!wq) {
@@ -392,9 +451,9 @@ int autofs4_wait_release(struct autofs_sb_info *sbi, autofs_wqt_t wait_queue_tok
 	}
 
 	*wql = wq->next;	/* Unlink from chain */
-	mutex_unlock(&sbi->wq_mutex);
 	kfree(wq->name.name);
 	wq->name.name = NULL;	/* Do not wait on this queue */
+	mutex_unlock(&sbi->wq_mutex);
 
 	wq->status = status;
 
-- 
cgit v1.2.3


From f4c7da02615bebcaf89f15a8d055922f515160b8 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:19 -0700
Subject: autofs4: add missing kfree

It see that the patch tittled "autofs4 - fix pending mount race" is
missing a change that I had recently made.

It's missing a kfree for the case mutex_lock_interruptible() fails
to aquire the wait queue mutex.

Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/waitq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index cd3b2a67169..1132cc2a031 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -332,8 +332,10 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 	qstr.name = name;
 	qstr.hash = full_name_hash(name, qstr.len);
 
-	if (mutex_lock_interruptible(&sbi->wq_mutex))
+	if (mutex_lock_interruptible(&sbi->wq_mutex)) {
+		kfree(qstr.name);
 		return -EINTR;
+	}
 
 	ret = validate_request(&wq, sbi, &qstr, dentry, notify);
 	if (ret <= 0) {
-- 
cgit v1.2.3


From e64be33ccaceaca67c84237dff8805b861398eab Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:20 -0700
Subject: autofs4: check kernel communication pipe is valid for write

It is possible for an autofs mount to become catatonic (and for the daemon
communication pipe to become NULL) after a wait has been initiallized but
before the request has been sent to the daemon.  We need to check for this
before sending the request packet.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/waitq.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 1132cc2a031..dd2914d7ad7 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -99,6 +99,7 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
 		union autofs_packet_union v4_pkt;
 		union autofs_v5_packet_union v5_pkt;
 	} pkt;
+	struct file *pipe = NULL;
 	size_t pktsz;
 
 	DPRINTK("wait id = 0x%08lx, name = %.*s, type=%d",
@@ -164,8 +165,19 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
 		return;
 	}
 
-	if (autofs4_write(sbi->pipe, &pkt, pktsz))
-		autofs4_catatonic_mode(sbi);
+	/* Check if we have become catatonic */
+	mutex_lock(&sbi->wq_mutex);
+	if (!sbi->catatonic) {
+		pipe = sbi->pipe;
+		get_file(pipe);
+	}
+	mutex_unlock(&sbi->wq_mutex);
+
+	if (pipe) {
+		if (autofs4_write(pipe, &pkt, pktsz))
+			autofs4_catatonic_mode(sbi);
+		fput(pipe);
+	}
 }
 
 static int autofs4_getpath(struct autofs_sb_info *sbi,
-- 
cgit v1.2.3


From 296f7bf78bc5c7a4d772aea580ce800d14040d1a Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:21 -0700
Subject: autofs4: fix waitq memory leak

If an autofs mount becomes catatonic before autofs4_wait_release() is
called the wait queue counter will not be decremented down to zero and the
entry will never be freed.  There are also races decrementing the wait
counter in the wait release function.  To deal with this the counter needs
to be updated while holding the wait queue mutex and waiters need to be
woken up unconditionally when the wait is removed from the queue to ensure
we eventually free the wait.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/autofs_i.h |  2 +-
 fs/autofs4/waitq.c    | 18 +++++++++---------
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index da8882ff31e..058e1800cae 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -84,7 +84,7 @@ struct autofs_wait_queue {
 	pid_t tgid;
 	/* This is for status reporting upon return */
 	int status;
-	atomic_t wait_ctr;
+	unsigned int wait_ctr;
 };
 
 #define AUTOFS_SBI_MAGIC 0x6d4a556d
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index dd2914d7ad7..3458dbc8fff 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -46,6 +46,7 @@ void autofs4_catatonic_mode(struct autofs_sb_info *sbi)
 			kfree(wq->name.name);
 			wq->name.name = NULL;
 		}
+		wq->wait_ctr--;
 		wake_up_interruptible(&wq->queue);
 		wq = nwq;
 	}
@@ -380,7 +381,7 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		wq->pid = current->pid;
 		wq->tgid = current->tgid;
 		wq->status = -EINTR; /* Status return if interrupted */
-		atomic_set(&wq->wait_ctr, 2);
+		wq->wait_ctr = 2;
 		mutex_unlock(&sbi->wq_mutex);
 
 		if (sbi->version < 5) {
@@ -406,7 +407,7 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		/* autofs4_notify_daemon() may block */
 		autofs4_notify_daemon(sbi, wq, type);
 	} else {
-		atomic_inc(&wq->wait_ctr);
+		wq->wait_ctr++;
 		mutex_unlock(&sbi->wq_mutex);
 		kfree(qstr.name);
 		DPRINTK("existing wait id = 0x%08lx, name = %.*s, nfy=%d",
@@ -442,8 +443,10 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 	status = wq->status;
 
 	/* Are we the last process to need status? */
-	if (atomic_dec_and_test(&wq->wait_ctr))
+	mutex_lock(&sbi->wq_mutex);
+	if (!--wq->wait_ctr)
 		kfree(wq);
+	mutex_unlock(&sbi->wq_mutex);
 
 	return status;
 }
@@ -467,14 +470,11 @@ int autofs4_wait_release(struct autofs_sb_info *sbi, autofs_wqt_t wait_queue_tok
 	*wql = wq->next;	/* Unlink from chain */
 	kfree(wq->name.name);
 	wq->name.name = NULL;	/* Do not wait on this queue */
-	mutex_unlock(&sbi->wq_mutex);
-
 	wq->status = status;
-
-	if (atomic_dec_and_test(&wq->wait_ctr))	/* Is anyone still waiting for this guy? */
+	wake_up_interruptible(&wq->queue);
+	if (!--wq->wait_ctr)
 		kfree(wq);
-	else
-		wake_up_interruptible(&wq->queue);
+	mutex_unlock(&sbi->wq_mutex);
 
 	return 0;
 }
-- 
cgit v1.2.3


From eb3b176796b0e53fd26fce86847231542eb0d198 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:22 -0700
Subject: autofs4: detect invalid direct mount requests

autofs v5 direct and offset mounts within an autofs filesystem are
triggered by existing autofs triger mounts so the mount point dentry must
be positive.  If the mount point dentry is negative then the trigger
doesn't exist so we can return fail immediately.

Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/waitq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 3458dbc8fff..bcb6c526546 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -328,6 +328,10 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 	if (sbi->catatonic)
 		return -ENOENT;
 
+	if (!dentry->d_inode &&
+	    (sbi->type & (AUTOFS_TYPE_DIRECT | AUTOFS_TYPE_OFFSET)))
+		return -ENOENT;
+
 	name = kmalloc(NAME_MAX + 1, GFP_KERNEL);
 	if (!name)
 		return -ENOMEM;
-- 
cgit v1.2.3


From c72305b5472522299bb6f45b736080128eb1c822 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:23 -0700
Subject: autofs4: indirect dentry must almost always be positive

We have been seeing mount requests comming to the automount daemon for
keys of the form "<map key>/<non key directory>" which are lookups for
invalid map keys.  But we can check for this in the kernel module and
return a fail immediately, without having to send a request to the daemon.

It is possible to recognise these requests are invalid based on whether
the request dentry is negative and its relation to the autofs file system
root.

For example, given the indirect multi-mount map entry:

idm1  \
    /mm1  <server>:/<path1>
    /mm2  <server>:/<path2>

For a request to mount idm1, IS_ROOT((idm1)->d_parent) will be always be
true and the dentry may be negative.  But directories idm1/mm1 and
idm1/mm2 will always be created as part of the mount request for idm1.  So
any mount request within idm1 itself must have a positive dentry otherwise
the map key is invalid.

In version 4 these multi-mount entries are all mounted and umounted as a
single request and in version 5 the directories idm1/mm1 and idm1/mm2 are
created and an autofs fs mounted on them to act as a mount trigger so the
above is also true.

This also holds true for the autofs version 4 pseudo direct mount feature.
 When this feature is used without the "--ghost" option automount(8) will
create internal submounts as we go down the map key paths which are
essentially normal indirect mounts for which the above holds.  If the
"--ghost" option is given the directories for map keys are created at
daemon startup so valid map entries correspond to postive dentries in the
autofs fs.

autofs version 5 direct mount maps are similar except that the IS_ROOT
check is not needed.  This has been addressed in a previous patch tittled
"autofs4 - detect invalid direct mount requests".

For example, given the direct multi-mount map entry:

/test/dm1  \
    /mm1  <server>:/<path1>
    /mm2  <server>:/<path2>

An autofs fs is mounted on /test/dm1 as a trigger mount and when a mount
is triggered for /test/dm1, the multi-mount offset directories
/test/dm1/mm1 and /test/dm1/mm2 are created and an autofs fs is mounted on
them to act as mount triggers.  So valid direct mount requests must always
have a positive dentry if they correspond to a valid map entry.

Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/waitq.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index bcb6c526546..35216d18d8b 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -328,9 +328,20 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 	if (sbi->catatonic)
 		return -ENOENT;
 
-	if (!dentry->d_inode &&
-	    (sbi->type & (AUTOFS_TYPE_DIRECT | AUTOFS_TYPE_OFFSET)))
-		return -ENOENT;
+	if (!dentry->d_inode) {
+		/*
+		 * A wait for a negative dentry is invalid for certain
+		 * cases. A direct or offset mount "always" has its mount
+		 * point directory created and so the request dentry must
+		 * be positive or the map key doesn't exist. The situation
+		 * is very similar for indirect mounts except only dentrys
+		 * in the root of the autofs file system may be negative.
+		 */
+		if (sbi->type & (AUTOFS_TYPE_DIRECT|AUTOFS_TYPE_OFFSET))
+			return -ENOENT;
+		else if (!IS_ROOT(dentry->d_parent))
+			return -ENOENT;
+	}
 
 	name = kmalloc(NAME_MAX + 1, GFP_KERNEL);
 	if (!name)
-- 
cgit v1.2.3


From ff9cd499d6258952385cb2f12e9a3c0908fd5786 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:24 -0700
Subject: autofs4: cleanup redundant readir code

The mount triggering functionality of readdir and related functions is no
longer used (and is quite broken as well).  The unused portions have been
removed.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/root.c | 149 ++++++------------------------------------------------
 1 file changed, 16 insertions(+), 133 deletions(-)

diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 87352654ff4..51c873ca8e8 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -25,8 +25,6 @@ static int autofs4_dir_rmdir(struct inode *,struct dentry *);
 static int autofs4_dir_mkdir(struct inode *,struct dentry *,int);
 static int autofs4_root_ioctl(struct inode *, struct file *,unsigned int,unsigned long);
 static int autofs4_dir_open(struct inode *inode, struct file *file);
-static int autofs4_dir_close(struct inode *inode, struct file *file);
-static int autofs4_dir_readdir(struct file * filp, void * dirent, filldir_t filldir);
 static int autofs4_root_readdir(struct file * filp, void * dirent, filldir_t filldir);
 static struct dentry *autofs4_lookup(struct inode *,struct dentry *, struct nameidata *);
 static void *autofs4_follow_link(struct dentry *, struct nameidata *);
@@ -44,9 +42,9 @@ const struct file_operations autofs4_root_operations = {
 
 const struct file_operations autofs4_dir_operations = {
 	.open		= autofs4_dir_open,
-	.release	= autofs4_dir_close,
+	.release	= dcache_dir_close,
 	.read		= generic_read_dir,
-	.readdir	= autofs4_dir_readdir,
+	.readdir	= dcache_readdir,
 };
 
 const struct inode_operations autofs4_indirect_root_inode_operations = {
@@ -98,17 +96,7 @@ static int autofs4_root_readdir(struct file *file, void *dirent,
 static int autofs4_dir_open(struct inode *inode, struct file *file)
 {
 	struct dentry *dentry = file->f_path.dentry;
-	struct vfsmount *mnt = file->f_path.mnt;
 	struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
-	struct dentry *cursor;
-	int status;
-
-	status = dcache_dir_open(inode, file);
-	if (status)
-		goto out;
-
-	cursor = file->private_data;
-	cursor->d_fsdata = NULL;
 
 	DPRINTK("file=%p dentry=%p %.*s",
 		file, dentry, dentry->d_name.len, dentry->d_name.name);
@@ -116,129 +104,24 @@ static int autofs4_dir_open(struct inode *inode, struct file *file)
 	if (autofs4_oz_mode(sbi))
 		goto out;
 
-	if (autofs4_ispending(dentry)) {
-		DPRINTK("dentry busy");
-		dcache_dir_close(inode, file);
-		status = -EBUSY;
-		goto out;
-	}
-
-	status = -ENOENT;
-	if (!d_mountpoint(dentry) && dentry->d_op && dentry->d_op->d_revalidate) {
-		struct nameidata nd;
-		int empty, ret;
-
-		/* In case there are stale directory dentrys from a failed mount */
-		spin_lock(&dcache_lock);
-		empty = list_empty(&dentry->d_subdirs);
+	/*
+	 * An empty directory in an autofs file system is always a
+	 * mount point. The daemon must have failed to mount this
+	 * during lookup so it doesn't exist. This can happen, for
+	 * example, if user space returns an incorrect status for a
+	 * mount request. Otherwise we're doing a readdir on the
+	 * autofs file system so just let the libfs routines handle
+	 * it.
+	 */
+	spin_lock(&dcache_lock);
+	if (!d_mountpoint(dentry) && __simple_empty(dentry)) {
 		spin_unlock(&dcache_lock);
-
-		if (!empty)
-			d_invalidate(dentry);
-
-		nd.flags = LOOKUP_DIRECTORY;
-		ret = (dentry->d_op->d_revalidate)(dentry, &nd);
-
-		if (ret <= 0) {
-			if (ret < 0)
-				status = ret;
-			dcache_dir_close(inode, file);
-			goto out;
-		}
+		return -ENOENT;
 	}
+	spin_unlock(&dcache_lock);
 
-	if (d_mountpoint(dentry)) {
-		struct file *fp = NULL;
-		struct path fp_path = { .dentry = dentry, .mnt = mnt };
-
-		path_get(&fp_path);
-
-		if (!autofs4_follow_mount(&fp_path.mnt, &fp_path.dentry)) {
-			path_put(&fp_path);
-			dcache_dir_close(inode, file);
-			goto out;
-		}
-
-		fp = dentry_open(fp_path.dentry, fp_path.mnt, file->f_flags);
-		status = PTR_ERR(fp);
-		if (IS_ERR(fp)) {
-			dcache_dir_close(inode, file);
-			goto out;
-		}
-		cursor->d_fsdata = fp;
-	}
-	return 0;
-out:
-	return status;
-}
-
-static int autofs4_dir_close(struct inode *inode, struct file *file)
-{
-	struct dentry *dentry = file->f_path.dentry;
-	struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
-	struct dentry *cursor = file->private_data;
-	int status = 0;
-
-	DPRINTK("file=%p dentry=%p %.*s",
-		file, dentry, dentry->d_name.len, dentry->d_name.name);
-
-	if (autofs4_oz_mode(sbi))
-		goto out;
-
-	if (autofs4_ispending(dentry)) {
-		DPRINTK("dentry busy");
-		status = -EBUSY;
-		goto out;
-	}
-
-	if (d_mountpoint(dentry)) {
-		struct file *fp = cursor->d_fsdata;
-		if (!fp) {
-			status = -ENOENT;
-			goto out;
-		}
-		filp_close(fp, current->files);
-	}
-out:
-	dcache_dir_close(inode, file);
-	return status;
-}
-
-static int autofs4_dir_readdir(struct file *file, void *dirent, filldir_t filldir)
-{
-	struct dentry *dentry = file->f_path.dentry;
-	struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
-	struct dentry *cursor = file->private_data;
-	int status;
-
-	DPRINTK("file=%p dentry=%p %.*s",
-		file, dentry, dentry->d_name.len, dentry->d_name.name);
-
-	if (autofs4_oz_mode(sbi))
-		goto out;
-
-	if (autofs4_ispending(dentry)) {
-		DPRINTK("dentry busy");
-		return -EBUSY;
-	}
-
-	if (d_mountpoint(dentry)) {
-		struct file *fp = cursor->d_fsdata;
-
-		if (!fp)
-			return -ENOENT;
-
-		if (!fp->f_op || !fp->f_op->readdir)
-			goto out;
-
-		status = vfs_readdir(fp, filldir, dirent);
-		file->f_pos = fp->f_pos;
-		if (status)
-			autofs4_copy_atime(file, fp);
-		return status;
-	}
 out:
-	return dcache_readdir(file, dirent, filldir);
+	return dcache_dir_open(inode, file);
 }
 
 static int try_to_fill_dentry(struct dentry *dentry, int flags)
-- 
cgit v1.2.3


From 26e81b3142f1ba497d4cd0365c13661684b784ce Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:25 -0700
Subject: autofs4: fix pending checks

There are two cases for which a dentry that has a pending mount request
does not wait for completion.  One is via autofs4_revalidate() and the
other via autofs4_follow_link().

In revalidate, after the mount point directory is created, but before the
mount is done, the check in try_to_fill_dentry() can can fail to send the
dentry to the wait queue since the dentry is positive and the lookup flags
may contain only LOOKUP_FOLLOW.  Although we don't trigger a mount for the
LOOKUP_FOLLOW flag, if ther's one pending we might as well wait and use
the mounted dentry for the lookup.

In autofs4_follow_link() the dentry is not checked to see if it is pending
so it may fail to call try_to_fill_dentry() and not wait for mount
completion.

A dentry that is pending must always be sent to the wait queue.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/root.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 51c873ca8e8..61d1dca1688 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -177,7 +177,8 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 			return status;
 		}
 	/* Trigger mount for path component or follow link */
-	} else if (flags & (TRIGGER_FLAGS | TRIGGER_INTENTS) ||
+	} else if (dentry->d_flags & DCACHE_AUTOFS_PENDING ||
+			flags & (TRIGGER_FLAGS | TRIGGER_INTENTS) ||
 			current->link_count) {
 		DPRINTK("waiting for mount name=%.*s",
 			dentry->d_name.len, dentry->d_name.name);
@@ -223,7 +224,8 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 
 	/* If it's our master or we shouldn't trigger a mount we're done */
 	lookup_type = nd->flags & (TRIGGER_FLAGS | TRIGGER_INTENTS);
-	if (oz_mode || !lookup_type)
+	if (oz_mode ||
+	    !(lookup_type || dentry->d_flags & DCACHE_AUTOFS_PENDING))
 		goto done;
 
 	/* If an expire request is pending wait for it. */
@@ -242,7 +244,8 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 	 * don't try to mount it again.
 	 */
 	spin_lock(&dcache_lock);
-	if (!d_mountpoint(dentry) && __simple_empty(dentry)) {
+	if (dentry->d_flags & DCACHE_AUTOFS_PENDING ||
+	    (!d_mountpoint(dentry) && __simple_empty(dentry))) {
 		spin_unlock(&dcache_lock);
 
 		status = try_to_fill_dentry(dentry, 0);
-- 
cgit v1.2.3


From 97e7449a7ad883bf9f516fc970778d75999c7843 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:26 -0700
Subject: autofs4: fix indirect mount pending expire race

The selection of a dentry for expiration and the setting of the
AUTOFS_INF_EXPIRING flag isn't done atomically which can lead to lookups
walking into an expiring mount.

What happens is that an expire is initiated by the daemon and a dentry is
selected for expire but, since there is no lock held between the selection
and setting of the expiring flag, a process may find the flag clear and
continue walking into the mount tree at the same time the daemon attempts
the expire it.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/autofs_i.h | 10 +++-------
 fs/autofs4/expire.c   | 46 +++++++++++++++++++++++++++++++++++-----------
 fs/autofs4/root.c     | 32 +++++++++++++++++++++++++++-----
 3 files changed, 65 insertions(+), 23 deletions(-)

diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index 058e1800cae..5d90ed3b4b4 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -138,18 +138,14 @@ static inline int autofs4_oz_mode(struct autofs_sb_info *sbi) {
 static inline int autofs4_ispending(struct dentry *dentry)
 {
 	struct autofs_info *inf = autofs4_dentry_ino(dentry);
-	int pending = 0;
 
 	if (dentry->d_flags & DCACHE_AUTOFS_PENDING)
 		return 1;
 
-	if (inf) {
-		spin_lock(&inf->sbi->fs_lock);
-		pending = inf->flags & AUTOFS_INF_EXPIRING;
-		spin_unlock(&inf->sbi->fs_lock);
-	}
+	if (inf->flags & AUTOFS_INF_EXPIRING)
+		return 1;
 
-	return pending;
+	return 0;
 }
 
 static inline void autofs4_copy_atime(struct file *src, struct file *dst)
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 894fee54d4d..19f5bea2704 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -292,6 +292,8 @@ static struct dentry *autofs4_expire_indirect(struct super_block *sb,
 	struct list_head *next;
 	int do_now = how & AUTOFS_EXP_IMMEDIATE;
 	int exp_leaves = how & AUTOFS_EXP_LEAVES;
+	struct autofs_info *ino;
+	unsigned int ino_count;
 
 	if (!root)
 		return NULL;
@@ -316,6 +318,9 @@ static struct dentry *autofs4_expire_indirect(struct super_block *sb,
 		dentry = dget(dentry);
 		spin_unlock(&dcache_lock);
 
+		spin_lock(&sbi->fs_lock);
+		ino = autofs4_dentry_ino(dentry);
+
 		/*
 		 * Case 1: (i) indirect mount or top level pseudo direct mount
 		 *	   (autofs-4.1).
@@ -326,6 +331,11 @@ static struct dentry *autofs4_expire_indirect(struct super_block *sb,
 			DPRINTK("checking mountpoint %p %.*s",
 				dentry, (int)dentry->d_name.len, dentry->d_name.name);
 
+			/* Path walk currently on this dentry? */
+			ino_count = atomic_read(&ino->count) + 2;
+			if (atomic_read(&dentry->d_count) > ino_count)
+				goto next;
+
 			/* Can we umount this guy */
 			if (autofs4_mount_busy(mnt, dentry))
 				goto next;
@@ -343,23 +353,25 @@ static struct dentry *autofs4_expire_indirect(struct super_block *sb,
 
 		/* Case 2: tree mount, expire iff entire tree is not busy */
 		if (!exp_leaves) {
-			/* Lock the tree as we must expire as a whole */
-			spin_lock(&sbi->fs_lock);
-			if (!autofs4_tree_busy(mnt, dentry, timeout, do_now)) {
-				struct autofs_info *inf = autofs4_dentry_ino(dentry);
+			/* Path walk currently on this dentry? */
+			ino_count = atomic_read(&ino->count) + 1;
+			if (atomic_read(&dentry->d_count) > ino_count)
+				goto next;
 
-				/* Set this flag early to catch sys_chdir and the like */
-				inf->flags |= AUTOFS_INF_EXPIRING;
-				spin_unlock(&sbi->fs_lock);
+			if (!autofs4_tree_busy(mnt, dentry, timeout, do_now)) {
 				expired = dentry;
 				goto found;
 			}
-			spin_unlock(&sbi->fs_lock);
 		/*
 		 * Case 3: pseudo direct mount, expire individual leaves
 		 *	   (autofs-4.1).
 		 */
 		} else {
+			/* Path walk currently on this dentry? */
+			ino_count = atomic_read(&ino->count) + 1;
+			if (atomic_read(&dentry->d_count) > ino_count)
+				goto next;
+
 			expired = autofs4_check_leaves(mnt, dentry, timeout, do_now);
 			if (expired) {
 				dput(dentry);
@@ -367,6 +379,7 @@ static struct dentry *autofs4_expire_indirect(struct super_block *sb,
 			}
 		}
 next:
+		spin_unlock(&sbi->fs_lock);
 		dput(dentry);
 		spin_lock(&dcache_lock);
 		next = next->next;
@@ -377,6 +390,9 @@ next:
 found:
 	DPRINTK("returning %p %.*s",
 		expired, (int)expired->d_name.len, expired->d_name.name);
+	ino = autofs4_dentry_ino(expired);
+	ino->flags |= AUTOFS_INF_EXPIRING;
+	spin_unlock(&sbi->fs_lock);
 	spin_lock(&dcache_lock);
 	list_move(&expired->d_parent->d_subdirs, &expired->d_u.d_child);
 	spin_unlock(&dcache_lock);
@@ -390,7 +406,9 @@ int autofs4_expire_run(struct super_block *sb,
 		      struct autofs_packet_expire __user *pkt_p)
 {
 	struct autofs_packet_expire pkt;
+	struct autofs_info *ino;
 	struct dentry *dentry;
+	int ret = 0;
 
 	memset(&pkt,0,sizeof pkt);
 
@@ -406,9 +424,14 @@ int autofs4_expire_run(struct super_block *sb,
 	dput(dentry);
 
 	if ( copy_to_user(pkt_p, &pkt, sizeof(struct autofs_packet_expire)) )
-		return -EFAULT;
+		ret = -EFAULT;
 
-	return 0;
+	spin_lock(&sbi->fs_lock);
+	ino = autofs4_dentry_ino(dentry);
+	ino->flags &= ~AUTOFS_INF_EXPIRING;
+	spin_unlock(&sbi->fs_lock);
+
+	return ret;
 }
 
 /* Call repeatedly until it returns -EAGAIN, meaning there's nothing
@@ -433,9 +456,10 @@ int autofs4_expire_multi(struct super_block *sb, struct vfsmount *mnt,
 
 		/* This is synchronous because it makes the daemon a
                    little easier */
-		ino->flags |= AUTOFS_INF_EXPIRING;
 		ret = autofs4_wait(sbi, dentry, NFY_EXPIRE);
+		spin_lock(&sbi->fs_lock);
 		ino->flags &= ~AUTOFS_INF_EXPIRING;
+		spin_unlock(&sbi->fs_lock);
 		dput(dentry);
 	}
 
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 61d1dca1688..1c2579de1f2 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -133,7 +133,10 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 	/* Block on any pending expiry here; invalidate the dentry
            when expiration is done to trigger mount request with a new
            dentry */
-	if (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
+	spin_lock(&sbi->fs_lock);
+	if (ino->flags & AUTOFS_INF_EXPIRING) {
+		spin_unlock(&sbi->fs_lock);
+
 		DPRINTK("waiting for expire %p name=%.*s",
 			 dentry, dentry->d_name.len, dentry->d_name.name);
 
@@ -149,8 +152,11 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 		status = d_invalidate(dentry);
 		if (status != -EBUSY)
 			return -EAGAIN;
-	}
 
+		goto cont;
+	}
+	spin_unlock(&sbi->fs_lock);
+cont:
 	DPRINTK("dentry=%p %.*s ino=%p",
 		 dentry, dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
 
@@ -229,15 +235,21 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 		goto done;
 
 	/* If an expire request is pending wait for it. */
-	if (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
+	spin_lock(&sbi->fs_lock);
+	if (ino->flags & AUTOFS_INF_EXPIRING) {
+		spin_unlock(&sbi->fs_lock);
+
 		DPRINTK("waiting for active request %p name=%.*s",
 			dentry, dentry->d_name.len, dentry->d_name.name);
 
 		status = autofs4_wait(sbi, dentry, NFY_NONE);
 
 		DPRINTK("request done status=%d", status);
-	}
 
+		goto cont;
+	}
+	spin_unlock(&sbi->fs_lock);
+cont:
 	/*
 	 * If the dentry contains directories then it is an
 	 * autofs multi-mount with no root mount offset. So
@@ -292,8 +304,11 @@ static int autofs4_revalidate(struct dentry *dentry, struct nameidata *nd)
 	int status = 1;
 
 	/* Pending dentry */
+	spin_lock(&sbi->fs_lock);
 	if (autofs4_ispending(dentry)) {
 		/* The daemon never causes a mount to trigger */
+		spin_unlock(&sbi->fs_lock);
+
 		if (oz_mode)
 			return 1;
 
@@ -316,6 +331,7 @@ static int autofs4_revalidate(struct dentry *dentry, struct nameidata *nd)
 
 		return status;
 	}
+	spin_unlock(&sbi->fs_lock);
 
 	/* Negative dentry.. invalidate if "old" */
 	if (dentry->d_inode == NULL)
@@ -329,6 +345,7 @@ static int autofs4_revalidate(struct dentry *dentry, struct nameidata *nd)
 		DPRINTK("dentry=%p %.*s, emptydir",
 			 dentry, dentry->d_name.len, dentry->d_name.name);
 		spin_unlock(&dcache_lock);
+
 		/* The daemon never causes a mount to trigger */
 		if (oz_mode)
 			return 1;
@@ -521,13 +538,18 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 		 * so it must have been successful, so just wait for it.
 		 */
 		ino = autofs4_dentry_ino(expiring);
-		while (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
+		spin_lock(&sbi->fs_lock);
+		if (ino->flags & AUTOFS_INF_EXPIRING) {
+			spin_unlock(&sbi->fs_lock);
 			DPRINTK("wait for incomplete expire %p name=%.*s",
 				expiring, expiring->d_name.len,
 				expiring->d_name.name);
 			autofs4_wait(sbi, expiring, NFY_NONE);
 			DPRINTK("request completed");
+			goto cont;
 		}
+		spin_unlock(&sbi->fs_lock);
+cont:
 		spin_lock(&sbi->lookup_lock);
 		if (!list_empty(&ino->expiring))
 			list_del_init(&ino->expiring);
-- 
cgit v1.2.3


From 6e60a9ab5f5d314735467752f623072f5b75157a Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:27 -0700
Subject: autofs4: fix direct mount pending expire race

For direct and offset type mounts that are covered by another mount we
cannot check the AUTOFS_INF_EXPIRING flag during a path walk which leads
to lookups walking into an expiring mount while it is being expired.

For example, for the direct multi-mount map entry with a couple of
offsets:

/race/mm1  /      <server1>:/<path1>
           /om1   <server2>:/<path2>
           /om2   <server1>:/<path3>

an autofs trigger mount is mounted on /race/mm1 and when accessed it is
over mounted and trigger mounts made for /race/mm1/om1 and /race/mm1/om2.
So it isn't possible for path walks to see the expiring flag at all and
they happily walk into the file system while it is expiring.

When expiring these mounts follow_down() must stop at the autofs mount and
all processes must block in the ->follow_link() method (except the daemon)
until the expire is complete.  This is done by decrementing the d_mounted
field of the autofs trigger mount root dentry until the expire is
completed.  In ->follow_link() all processes wait on the expire and the
mount following is completed for the daemon until the expire is complete.

Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/autofs_i.h |  3 +++
 fs/autofs4/expire.c   | 16 +++++++++---
 fs/autofs4/root.c     | 72 +++++++++++++++++++++++++++++++++++----------------
 3 files changed, 65 insertions(+), 26 deletions(-)

diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index 5d90ed3b4b4..4b40cbc71e9 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -52,6 +52,8 @@ struct autofs_info {
 
 	int		flags;
 
+	struct completion expire_complete;
+
 	struct list_head active;
 	struct list_head expiring;
 
@@ -69,6 +71,7 @@ struct autofs_info {
 };
 
 #define AUTOFS_INF_EXPIRING	(1<<0) /* dentry is in the process of expiring */
+#define AUTOFS_INF_MOUNTPOINT	(1<<1) /* mountpoint status for direct expire */
 
 struct autofs_wait_queue {
 	wait_queue_head_t queue;
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 19f5bea2704..705b9f057fb 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -259,13 +259,15 @@ static struct dentry *autofs4_expire_direct(struct super_block *sb,
 	now = jiffies;
 	timeout = sbi->exp_timeout;
 
-	/* Lock the tree as we must expire as a whole */
 	spin_lock(&sbi->fs_lock);
 	if (!autofs4_direct_busy(mnt, root, timeout, do_now)) {
 		struct autofs_info *ino = autofs4_dentry_ino(root);
-
-		/* Set this flag early to catch sys_chdir and the like */
+		if (d_mountpoint(root)) {
+			ino->flags |= AUTOFS_INF_MOUNTPOINT;
+			root->d_mounted--;
+		}
 		ino->flags |= AUTOFS_INF_EXPIRING;
+		init_completion(&ino->expire_complete);
 		spin_unlock(&sbi->fs_lock);
 		return root;
 	}
@@ -392,6 +394,7 @@ found:
 		expired, (int)expired->d_name.len, expired->d_name.name);
 	ino = autofs4_dentry_ino(expired);
 	ino->flags |= AUTOFS_INF_EXPIRING;
+	init_completion(&ino->expire_complete);
 	spin_unlock(&sbi->fs_lock);
 	spin_lock(&dcache_lock);
 	list_move(&expired->d_parent->d_subdirs, &expired->d_u.d_child);
@@ -429,6 +432,7 @@ int autofs4_expire_run(struct super_block *sb,
 	spin_lock(&sbi->fs_lock);
 	ino = autofs4_dentry_ino(dentry);
 	ino->flags &= ~AUTOFS_INF_EXPIRING;
+	complete_all(&ino->expire_complete);
 	spin_unlock(&sbi->fs_lock);
 
 	return ret;
@@ -457,8 +461,14 @@ int autofs4_expire_multi(struct super_block *sb, struct vfsmount *mnt,
 		/* This is synchronous because it makes the daemon a
                    little easier */
 		ret = autofs4_wait(sbi, dentry, NFY_EXPIRE);
+
 		spin_lock(&sbi->fs_lock);
+		if (ino->flags & AUTOFS_INF_MOUNTPOINT) {
+			sb->s_root->d_mounted++;
+			ino->flags &= ~AUTOFS_INF_MOUNTPOINT;
+		}
 		ino->flags &= ~AUTOFS_INF_EXPIRING;
+		complete_all(&ino->expire_complete);
 		spin_unlock(&sbi->fs_lock);
 		dput(dentry);
 	}
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 1c2579de1f2..adbd8559e87 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -141,6 +141,7 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 			 dentry, dentry->d_name.len, dentry->d_name.name);
 
 		status = autofs4_wait(sbi, dentry, NFY_NONE);
+		wait_for_completion(&ino->expire_complete);
 
 		DPRINTK("expire done status=%d", status);
 
@@ -227,14 +228,32 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 	DPRINTK("dentry=%p %.*s oz_mode=%d nd->flags=%d",
 		dentry, dentry->d_name.len, dentry->d_name.name, oz_mode,
 		nd->flags);
-
-	/* If it's our master or we shouldn't trigger a mount we're done */
-	lookup_type = nd->flags & (TRIGGER_FLAGS | TRIGGER_INTENTS);
-	if (oz_mode ||
-	    !(lookup_type || dentry->d_flags & DCACHE_AUTOFS_PENDING))
+	/*
+	 * For an expire of a covered direct or offset mount we need
+	 * to beeak out of follow_down() at the autofs mount trigger
+	 * (d_mounted--), so we can see the expiring flag, and manage
+	 * the blocking and following here until the expire is completed.
+	 */
+	if (oz_mode) {
+		spin_lock(&sbi->fs_lock);
+		if (ino->flags & AUTOFS_INF_EXPIRING) {
+			spin_unlock(&sbi->fs_lock);
+			/* Follow down to our covering mount. */
+			if (!follow_down(&nd->path.mnt, &nd->path.dentry))
+				goto done;
+			/*
+			 * We shouldn't need to do this but we have no way
+			 * of knowing what may have been done so try a follow
+			 * just in case.
+			 */
+			autofs4_follow_mount(&nd->path.mnt, &nd->path.dentry);
+			goto done;
+		}
+		spin_unlock(&sbi->fs_lock);
 		goto done;
+	}
 
-	/* If an expire request is pending wait for it. */
+	/* If an expire request is pending everyone must wait. */
 	spin_lock(&sbi->fs_lock);
 	if (ino->flags & AUTOFS_INF_EXPIRING) {
 		spin_unlock(&sbi->fs_lock);
@@ -243,6 +262,7 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 			dentry, dentry->d_name.len, dentry->d_name.name);
 
 		status = autofs4_wait(sbi, dentry, NFY_NONE);
+		wait_for_completion(&ino->expire_complete);
 
 		DPRINTK("request done status=%d", status);
 
@@ -250,10 +270,15 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 	}
 	spin_unlock(&sbi->fs_lock);
 cont:
+	/* We trigger a mount for almost all flags */
+	lookup_type = nd->flags & (TRIGGER_FLAGS | TRIGGER_INTENTS);
+	if (!(lookup_type || dentry->d_flags & DCACHE_AUTOFS_PENDING))
+		goto done;
+
 	/*
-	 * If the dentry contains directories then it is an
-	 * autofs multi-mount with no root mount offset. So
-	 * don't try to mount it again.
+	 * If the dentry contains directories then it is an autofs
+	 * multi-mount with no root mount offset. So don't try to
+	 * mount it again.
 	 */
 	spin_lock(&dcache_lock);
 	if (dentry->d_flags & DCACHE_AUTOFS_PENDING ||
@@ -264,22 +289,22 @@ cont:
 		if (status)
 			goto out_error;
 
-		/*
-		 * The mount succeeded but if there is no root mount
-		 * it must be an autofs multi-mount with no root offset
-		 * so we don't need to follow the mount.
-		 */
-		if (d_mountpoint(dentry)) {
-			if (!autofs4_follow_mount(&nd->path.mnt,
-						  &nd->path.dentry)) {
-				status = -ENOENT;
-				goto out_error;
-			}
-		}
-
-		goto done;
+		goto follow;
 	}
 	spin_unlock(&dcache_lock);
+follow:
+	/*
+	 * If there is no root mount it must be an autofs
+	 * multi-mount with no root offset so we don't need
+	 * to follow it.
+	 */
+	if (d_mountpoint(dentry)) {
+		if (!autofs4_follow_mount(&nd->path.mnt,
+					  &nd->path.dentry)) {
+			status = -ENOENT;
+			goto out_error;
+		}
+	}
 
 done:
 	return NULL;
@@ -545,6 +570,7 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 				expiring, expiring->d_name.len,
 				expiring->d_name.name);
 			autofs4_wait(sbi, expiring, NFY_NONE);
+			wait_for_completion(&ino->expire_complete);
 			DPRINTK("request completed");
 			goto cont;
 		}
-- 
cgit v1.2.3


From ec6e8c7d3f9073336ec7b2eed3fcda6f922087c3 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:28 -0700
Subject: autofs4: fix direct mount pending expire race - correction

Appologies, somehow I seem to have sent an out dated version of this
patch. Here is an additional patch that brings the patch up to date.

Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/root.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index adbd8559e87..e062ee5a3ed 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -241,13 +241,7 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 			/* Follow down to our covering mount. */
 			if (!follow_down(&nd->path.mnt, &nd->path.dentry))
 				goto done;
-			/*
-			 * We shouldn't need to do this but we have no way
-			 * of knowing what may have been done so try a follow
-			 * just in case.
-			 */
-			autofs4_follow_mount(&nd->path.mnt, &nd->path.dentry);
-			goto done;
+			goto follow;
 		}
 		spin_unlock(&sbi->fs_lock);
 		goto done;
@@ -273,7 +267,7 @@ cont:
 	/* We trigger a mount for almost all flags */
 	lookup_type = nd->flags & (TRIGGER_FLAGS | TRIGGER_INTENTS);
 	if (!(lookup_type || dentry->d_flags & DCACHE_AUTOFS_PENDING))
-		goto done;
+		goto follow;
 
 	/*
 	 * If the dentry contains directories then it is an autofs
-- 
cgit v1.2.3


From 06a3598552dc3b2b30eb18bd53bbac2a901489d7 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:28 -0700
Subject: autofs4: reorganize expire pending wait function calls

This patch re-orgnirzes the checking for and waiting on active expires and
elininates redundant checks.

Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/autofs_i.h |  1 +
 fs/autofs4/expire.c   | 29 ++++++++++++++++++++
 fs/autofs4/root.c     | 75 +++++++--------------------------------------------
 3 files changed, 40 insertions(+), 65 deletions(-)

diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index 4b40cbc71e9..69a2f5c9231 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -163,6 +163,7 @@ void autofs4_free_ino(struct autofs_info *);
 
 /* Expiration */
 int is_autofs4_dentry(struct dentry *);
+int autofs4_expire_wait(struct dentry *dentry);
 int autofs4_expire_run(struct super_block *, struct vfsmount *,
 			struct autofs_sb_info *,
 			struct autofs_packet_expire __user *);
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 705b9f057fb..cdabb796ff0 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -402,6 +402,35 @@ found:
 	return expired;
 }
 
+int autofs4_expire_wait(struct dentry *dentry)
+{
+	struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
+	struct autofs_info *ino = autofs4_dentry_ino(dentry);
+	int status;
+
+	/* Block on any pending expire */
+	spin_lock(&sbi->fs_lock);
+	if (ino->flags & AUTOFS_INF_EXPIRING) {
+		spin_unlock(&sbi->fs_lock);
+
+		DPRINTK("waiting for expire %p name=%.*s",
+			 dentry, dentry->d_name.len, dentry->d_name.name);
+
+		status = autofs4_wait(sbi, dentry, NFY_NONE);
+		wait_for_completion(&ino->expire_complete);
+
+		DPRINTK("expire done status=%d", status);
+
+		if (d_unhashed(dentry))
+			return -EAGAIN;
+
+		return status;
+	}
+	spin_unlock(&sbi->fs_lock);
+
+	return 0;
+}
+
 /* Perform an expiry operation */
 int autofs4_expire_run(struct super_block *sb,
 		      struct vfsmount *mnt,
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index e062ee5a3ed..ae22bde0bbd 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -130,34 +130,6 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 	struct autofs_info *ino = autofs4_dentry_ino(dentry);
 	int status;
 
-	/* Block on any pending expiry here; invalidate the dentry
-           when expiration is done to trigger mount request with a new
-           dentry */
-	spin_lock(&sbi->fs_lock);
-	if (ino->flags & AUTOFS_INF_EXPIRING) {
-		spin_unlock(&sbi->fs_lock);
-
-		DPRINTK("waiting for expire %p name=%.*s",
-			 dentry, dentry->d_name.len, dentry->d_name.name);
-
-		status = autofs4_wait(sbi, dentry, NFY_NONE);
-		wait_for_completion(&ino->expire_complete);
-
-		DPRINTK("expire done status=%d", status);
-
-		/*
-		 * If the directory still exists the mount request must
-		 * continue otherwise it can't be followed at the right
-		 * time during the walk.
-		 */
-		status = d_invalidate(dentry);
-		if (status != -EBUSY)
-			return -EAGAIN;
-
-		goto cont;
-	}
-	spin_unlock(&sbi->fs_lock);
-cont:
 	DPRINTK("dentry=%p %.*s ino=%p",
 		 dentry, dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
 
@@ -248,22 +220,8 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 	}
 
 	/* If an expire request is pending everyone must wait. */
-	spin_lock(&sbi->fs_lock);
-	if (ino->flags & AUTOFS_INF_EXPIRING) {
-		spin_unlock(&sbi->fs_lock);
-
-		DPRINTK("waiting for active request %p name=%.*s",
-			dentry, dentry->d_name.len, dentry->d_name.name);
-
-		status = autofs4_wait(sbi, dentry, NFY_NONE);
-		wait_for_completion(&ino->expire_complete);
+	autofs4_expire_wait(dentry);
 
-		DPRINTK("request done status=%d", status);
-
-		goto cont;
-	}
-	spin_unlock(&sbi->fs_lock);
-cont:
 	/* We trigger a mount for almost all flags */
 	lookup_type = nd->flags & (TRIGGER_FLAGS | TRIGGER_INTENTS);
 	if (!(lookup_type || dentry->d_flags & DCACHE_AUTOFS_PENDING))
@@ -331,6 +289,14 @@ static int autofs4_revalidate(struct dentry *dentry, struct nameidata *nd)
 		if (oz_mode)
 			return 1;
 
+		/*
+		 * If the directory has gone away due to an expire
+		 * we have been called as ->d_revalidate() and so
+		 * we need to return false and proceed to ->lookup().
+		 */
+		if (autofs4_expire_wait(dentry) == -EAGAIN)
+			return 0;
+
 		/*
 		 * A zero status is success otherwise we have a
 		 * negative error code.
@@ -339,15 +305,6 @@ static int autofs4_revalidate(struct dentry *dentry, struct nameidata *nd)
 		if (status == 0)
 			return 1;
 
-		/*
-		 * A status of EAGAIN here means that the dentry has gone
-		 * away while waiting for an expire to complete. If we are
-		 * racing with expire lookup will wait for it so this must
-		 * be a revalidate and we need to send it to lookup.
-		 */
-		if (status == -EAGAIN)
-			return 0;
-
 		return status;
 	}
 	spin_unlock(&sbi->fs_lock);
@@ -557,19 +514,7 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 		 * so it must have been successful, so just wait for it.
 		 */
 		ino = autofs4_dentry_ino(expiring);
-		spin_lock(&sbi->fs_lock);
-		if (ino->flags & AUTOFS_INF_EXPIRING) {
-			spin_unlock(&sbi->fs_lock);
-			DPRINTK("wait for incomplete expire %p name=%.*s",
-				expiring, expiring->d_name.len,
-				expiring->d_name.name);
-			autofs4_wait(sbi, expiring, NFY_NONE);
-			wait_for_completion(&ino->expire_complete);
-			DPRINTK("request completed");
-			goto cont;
-		}
-		spin_unlock(&sbi->fs_lock);
-cont:
+		autofs4_expire_wait(expiring);
 		spin_lock(&sbi->lookup_lock);
 		if (!list_empty(&ino->expiring))
 			list_del_init(&ino->expiring);
-- 
cgit v1.2.3


From aa55ddf340c9fa3f303ee16bbf35887e42c50304 Mon Sep 17 00:00:00 2001
From: Ian Kent <raven@themaw.net>
Date: Wed, 23 Jul 2008 21:30:29 -0700
Subject: autofs4: remove unused ioctls

The ioctls AUTOFS_IOC_TOGGLEREGHOST and AUTOFS_IOC_ASKREGHOST were added
several years ago but what they were intended for has never been
implemented (as far as I'm aware noone uses them) so remove them.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/autofs4/root.c        | 68 +-----------------------------------------------
 fs/compat_ioctl.c        |  2 --
 include/linux/auto_fs4.h |  2 --
 3 files changed, 1 insertion(+), 71 deletions(-)

diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index ae22bde0bbd..bcfb2dc0a61 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -25,7 +25,6 @@ static int autofs4_dir_rmdir(struct inode *,struct dentry *);
 static int autofs4_dir_mkdir(struct inode *,struct dentry *,int);
 static int autofs4_root_ioctl(struct inode *, struct file *,unsigned int,unsigned long);
 static int autofs4_dir_open(struct inode *inode, struct file *file);
-static int autofs4_root_readdir(struct file * filp, void * dirent, filldir_t filldir);
 static struct dentry *autofs4_lookup(struct inode *,struct dentry *, struct nameidata *);
 static void *autofs4_follow_link(struct dentry *, struct nameidata *);
 
@@ -36,7 +35,7 @@ const struct file_operations autofs4_root_operations = {
 	.open		= dcache_dir_open,
 	.release	= dcache_dir_close,
 	.read		= generic_read_dir,
-	.readdir	= autofs4_root_readdir,
+	.readdir	= dcache_readdir,
 	.ioctl		= autofs4_root_ioctl,
 };
 
@@ -71,28 +70,6 @@ const struct inode_operations autofs4_dir_inode_operations = {
 	.rmdir		= autofs4_dir_rmdir,
 };
 
-static int autofs4_root_readdir(struct file *file, void *dirent,
-				filldir_t filldir)
-{
-	struct autofs_sb_info *sbi = autofs4_sbi(file->f_path.dentry->d_sb);
-	int oz_mode = autofs4_oz_mode(sbi);
-
-	DPRINTK("called, filp->f_pos = %lld", file->f_pos);
-
-	/*
-	 * Don't set reghost flag if:
-	 * 1) f_pos is larger than zero -- we've already been here.
-	 * 2) we haven't even enabled reghosting in the 1st place.
-	 * 3) this is the daemon doing a readdir
-	 */
-	if (oz_mode && file->f_pos == 0 && sbi->reghost_enabled)
-		sbi->needs_reghost = 1;
-
-	DPRINTK("needs_reghost = %d", sbi->needs_reghost);
-
-	return dcache_readdir(file, dirent, filldir);
-}
-
 static int autofs4_dir_open(struct inode *inode, struct file *file)
 {
 	struct dentry *dentry = file->f_path.dentry;
@@ -858,44 +835,6 @@ static inline int autofs4_get_protosubver(struct autofs_sb_info *sbi, int __user
 	return put_user(sbi->sub_version, p);
 }
 
-/*
- * Tells the daemon whether we need to reghost or not. Also, clears
- * the reghost_needed flag.
- */
-static inline int autofs4_ask_reghost(struct autofs_sb_info *sbi, int __user *p)
-{
-	int status;
-
-	DPRINTK("returning %d", sbi->needs_reghost);
-
-	status = put_user(sbi->needs_reghost, p);
-	if (status)
-		return status;
-
-	sbi->needs_reghost = 0;
-	return 0;
-}
-
-/*
- * Enable / Disable reghosting ioctl() operation
- */
-static inline int autofs4_toggle_reghost(struct autofs_sb_info *sbi, int __user *p)
-{
-	int status;
-	int val;
-
-	status = get_user(val, p);
-
-	DPRINTK("reghost = %d", val);
-
-	if (status)
-		return status;
-
-	/* turn on/off reghosting, with the val */
-	sbi->reghost_enabled = val;
-	return 0;
-}
-
 /*
 * Tells the daemon whether it can umount the autofs mount.
 */
@@ -960,11 +899,6 @@ static int autofs4_root_ioctl(struct inode *inode, struct file *filp,
 	case AUTOFS_IOC_SETTIMEOUT:
 		return autofs4_get_set_timeout(sbi, p);
 
-	case AUTOFS_IOC_TOGGLEREGHOST:
-		return autofs4_toggle_reghost(sbi, p);
-	case AUTOFS_IOC_ASKREGHOST:
-		return autofs4_ask_reghost(sbi, p);
-
 	case AUTOFS_IOC_ASKUMOUNT:
 		return autofs4_ask_umount(filp->f_path.mnt, p);
 
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 7b3a03c7c6a..18e2c548161 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -2297,8 +2297,6 @@ COMPATIBLE_IOCTL(AUTOFS_IOC_PROTOVER)
 COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE)
 COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE_MULTI)
 COMPATIBLE_IOCTL(AUTOFS_IOC_PROTOSUBVER)
-COMPATIBLE_IOCTL(AUTOFS_IOC_ASKREGHOST)
-COMPATIBLE_IOCTL(AUTOFS_IOC_TOGGLEREGHOST)
 COMPATIBLE_IOCTL(AUTOFS_IOC_ASKUMOUNT)
 /* Raw devices */
 COMPATIBLE_IOCTL(RAW_SETBIND)
diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h
index 31a29541b50..b785c6f8644 100644
--- a/include/linux/auto_fs4.h
+++ b/include/linux/auto_fs4.h
@@ -98,8 +98,6 @@ union autofs_v5_packet_union {
 #define AUTOFS_IOC_EXPIRE_INDIRECT	AUTOFS_IOC_EXPIRE_MULTI
 #define AUTOFS_IOC_EXPIRE_DIRECT	AUTOFS_IOC_EXPIRE_MULTI
 #define AUTOFS_IOC_PROTOSUBVER		_IOR(0x93,0x67,int)
-#define AUTOFS_IOC_ASKREGHOST           _IOR(0x93,0x68,int)
-#define AUTOFS_IOC_TOGGLEREGHOST        _IOR(0x93,0x69,int)
 #define AUTOFS_IOC_ASKUMOUNT		_IOR(0x93,0x70,int)
 
 
-- 
cgit v1.2.3


From 35aa64f3a117a16c466f688f52ac3847b3b572e8 Mon Sep 17 00:00:00 2001
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Wed, 23 Jul 2008 21:30:29 -0700
Subject: rtc: m41t80: sort header inclusions for readability

Sort the header inclusions for readability.  No functional changes.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Bigga <ab@mycable.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-m41t80.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 0a19c06019b..4b260664547 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -13,21 +13,21 @@
  *
  */
 
-#include <linux/module.h>
+#include <linux/bcd.h>
+#include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/string.h>
-#include <linux/i2c.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
 #ifdef CONFIG_RTC_DRV_M41T80_WDT
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/reboot.h>
 #include <linux/fs.h>
 #include <linux/ioctl.h>
+#include <linux/miscdevice.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
 #endif
 
 #define M41T80_REG_SSEC	0
-- 
cgit v1.2.3


From 4c228db0b30fa12d65ae7461ce29ed1f4da12c5b Mon Sep 17 00:00:00 2001
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Wed, 23 Jul 2008 21:30:32 -0700
Subject: rtc: m41t80: use pr_info() as appropriate

Replace printk(KERN_INFO ...) calls with appropriate pr_info(...)
equivalents.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Bigga <ab@mycable.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-m41t80.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 4b260664547..24bc1689fc7 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -631,14 +631,12 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			return -EFAULT;
 
 		if (rv & WDIOS_DISABLECARD) {
-			printk(KERN_INFO
-			       "rtc-m41t80: disable watchdog\n");
+			pr_info("rtc-m41t80: disable watchdog\n");
 			wdt_disable();
 		}
 
 		if (rv & WDIOS_ENABLECARD) {
-			printk(KERN_INFO
-			       "rtc-m41t80: enable watchdog\n");
+			pr_info("rtc-m41t80: enable watchdog\n");
 			wdt_ping();
 		}
 
-- 
cgit v1.2.3


From 53f1b1433da7eac2607a4a0898a221a4485fd732 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 23 Jul 2008 21:30:32 -0700
Subject: rtc: push the BKL down into the driver ioctl method

For now just wrap the main logic, but this driver is a prime candidate for
someone wanting to eliminate the lock entirely

[lizf@cn.fujitsu.com: fix build failure]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/rtc.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index fa92a8af5a5..d1569a0d050 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -78,9 +78,10 @@
 #include <linux/wait.h>
 #include <linux/bcd.h>
 #include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <linux/uaccess.h>
 
 #include <asm/current.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #ifdef CONFIG_X86
@@ -144,8 +145,7 @@ static DEFINE_TIMER(rtc_irq_timer, rtc_dropped_irq, 0, 0);
 static ssize_t rtc_read(struct file *file, char __user *buf,
 			size_t count, loff_t *ppos);
 
-static int rtc_ioctl(struct inode *inode, struct file *file,
-		     unsigned int cmd, unsigned long arg);
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 
 #ifdef RTC_IRQ
 static unsigned int rtc_poll(struct file *file, poll_table *wait);
@@ -719,10 +719,13 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 			    &wtime, sizeof wtime) ? -EFAULT : 0;
 }
 
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	return rtc_do_ioctl(cmd, arg, 0);
+	long ret;
+	lock_kernel();
+	ret = rtc_do_ioctl(cmd, arg, 0);
+	unlock_kernel();
+	return ret;
 }
 
 /*
@@ -915,7 +918,7 @@ static const struct file_operations rtc_fops = {
 #ifdef RTC_IRQ
 	.poll		= rtc_poll,
 #endif
-	.ioctl		= rtc_ioctl,
+	.unlocked_ioctl	= rtc_ioctl,
 	.open		= rtc_open,
 	.release	= rtc_release,
 	.fasync		= rtc_fasync,
-- 
cgit v1.2.3


From 5ad31a575157147b43fa84ef1e21471661653878 Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Wed, 23 Jul 2008 21:30:33 -0700
Subject: rtc: remove BKL for ioctl()

Remove implicit use of BKL in ioctl() from the RTC framework.

Instead, the rtc->ops_lock is used.  That's the same lock that already
protects the RTC operations when they're issued through the exported
rtc_*() calls in drivers/rtc/interface.c ...  making this a bugfix, not
just a cleanup, since both ioctl calls and set_alarm() need to update IRQ
enable flags and that implies a common lock (which RTC drivers as a rule
do not provide on their own).

A new comment at the declaration of "struct rtc_class_ops" summarizes
current locking rules.  It's not clear to me that the exceptions listed
there should exist ...  if not, those are pre-existing problems which can
be fixed in a patch that doesn't relate to BKL removal.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-dev.c | 58 +++++++++++++++++++++++++++++++++------------------
 include/linux/rtc.h   | 17 +++++++++++++++
 2 files changed, 55 insertions(+), 20 deletions(-)

diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 0114a78b7cb..0a870b7e5c3 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -209,7 +209,7 @@ static unsigned int rtc_dev_poll(struct file *file, poll_table *wait)
 	return (data != 0) ? (POLLIN | POLLRDNORM) : 0;
 }
 
-static int rtc_dev_ioctl(struct inode *inode, struct file *file,
+static long rtc_dev_ioctl(struct file *file,
 		unsigned int cmd, unsigned long arg)
 {
 	int err = 0;
@@ -219,6 +219,10 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
 	struct rtc_wkalrm alarm;
 	void __user *uarg = (void __user *) arg;
 
+	err = mutex_lock_interruptible(&rtc->ops_lock);
+	if (err)
+		return -EBUSY;
+
 	/* check that the calling task has appropriate permissions
 	 * for certain ioctls. doing this check here is useful
 	 * to avoid duplicate code in each driver.
@@ -227,26 +231,31 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
 	case RTC_EPOCH_SET:
 	case RTC_SET_TIME:
 		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
+			err = -EACCES;
 		break;
 
 	case RTC_IRQP_SET:
 		if (arg > rtc->max_user_freq && !capable(CAP_SYS_RESOURCE))
-			return -EACCES;
+			err = -EACCES;
 		break;
 
 	case RTC_PIE_ON:
 		if (rtc->irq_freq > rtc->max_user_freq &&
 				!capable(CAP_SYS_RESOURCE))
-			return -EACCES;
+			err = -EACCES;
 		break;
 	}
 
+	if (err)
+		goto done;
+
 	/* try the driver's ioctl interface */
 	if (ops->ioctl) {
 		err = ops->ioctl(rtc->dev.parent, cmd, arg);
-		if (err != -ENOIOCTLCMD)
+		if (err != -ENOIOCTLCMD) {
+			mutex_unlock(&rtc->ops_lock);
 			return err;
+		}
 	}
 
 	/* if the driver does not provide the ioctl interface
@@ -265,15 +274,19 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
 
 	switch (cmd) {
 	case RTC_ALM_READ:
+		mutex_unlock(&rtc->ops_lock);
+
 		err = rtc_read_alarm(rtc, &alarm);
 		if (err < 0)
 			return err;
 
 		if (copy_to_user(uarg, &alarm.time, sizeof(tm)))
-			return -EFAULT;
-		break;
+			err = -EFAULT;
+		return err;
 
 	case RTC_ALM_SET:
+		mutex_unlock(&rtc->ops_lock);
+
 		if (copy_from_user(&alarm.time, uarg, sizeof(tm)))
 			return -EFAULT;
 
@@ -321,24 +334,26 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
 			}
 		}
 
-		err = rtc_set_alarm(rtc, &alarm);
-		break;
+		return rtc_set_alarm(rtc, &alarm);
 
 	case RTC_RD_TIME:
+		mutex_unlock(&rtc->ops_lock);
+
 		err = rtc_read_time(rtc, &tm);
 		if (err < 0)
 			return err;
 
 		if (copy_to_user(uarg, &tm, sizeof(tm)))
-			return -EFAULT;
-		break;
+			err = -EFAULT;
+		return err;
 
 	case RTC_SET_TIME:
+		mutex_unlock(&rtc->ops_lock);
+
 		if (copy_from_user(&tm, uarg, sizeof(tm)))
 			return -EFAULT;
 
-		err = rtc_set_time(rtc, &tm);
-		break;
+		return rtc_set_time(rtc, &tm);
 
 	case RTC_PIE_ON:
 		err = rtc_irq_set_state(rtc, NULL, 1);
@@ -376,34 +391,37 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
 		break;
 #endif
 	case RTC_WKALM_SET:
+		mutex_unlock(&rtc->ops_lock);
 		if (copy_from_user(&alarm, uarg, sizeof(alarm)))
 			return -EFAULT;
 
-		err = rtc_set_alarm(rtc, &alarm);
-		break;
+		return rtc_set_alarm(rtc, &alarm);
 
 	case RTC_WKALM_RD:
+		mutex_unlock(&rtc->ops_lock);
 		err = rtc_read_alarm(rtc, &alarm);
 		if (err < 0)
 			return err;
 
 		if (copy_to_user(uarg, &alarm, sizeof(alarm)))
-			return -EFAULT;
-		break;
+			err = -EFAULT;
+		return err;
 
 #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
 	case RTC_UIE_OFF:
 		clear_uie(rtc);
-		return 0;
+		break;
 
 	case RTC_UIE_ON:
-		return set_uie(rtc);
+		err = set_uie(rtc);
 #endif
 	default:
 		err = -ENOTTY;
 		break;
 	}
 
+done:
+	mutex_unlock(&rtc->ops_lock);
 	return err;
 }
 
@@ -432,7 +450,7 @@ static const struct file_operations rtc_dev_fops = {
 	.llseek		= no_llseek,
 	.read		= rtc_dev_read,
 	.poll		= rtc_dev_poll,
-	.ioctl		= rtc_dev_ioctl,
+	.unlocked_ioctl	= rtc_dev_ioctl,
 	.open		= rtc_dev_open,
 	.release	= rtc_dev_release,
 	.fasync		= rtc_dev_fasync,
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index f2d0d152772..b01fe004cb5 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -115,6 +115,23 @@ extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
 
 extern struct class *rtc_class;
 
+/*
+ * For these RTC methods the device parameter is the physical device
+ * on whatever bus holds the hardware (I2C, Platform, SPI, etc), which
+ * was passed to rtc_device_register().  Its driver_data normally holds
+ * device state, including the rtc_device pointer for the RTC.
+ *
+ * Most of these methods are called with rtc_device.ops_lock held,
+ * through the rtc_*(struct rtc_device *, ...) calls.
+ *
+ * The (current) exceptions are mostly filesystem hooks:
+ *   - the proc() hook for procfs
+ *   - non-ioctl() chardev hooks:  open(), release(), read_callback()
+ *   - periodic irq calls:  irq_set_state(), irq_set_freq()
+ *
+ * REVISIT those periodic irq calls *do* have ops_lock when they're
+ * issued through ioctl() ...
+ */
 struct rtc_class_ops {
 	int (*open)(struct device *);
 	void (*release)(struct device *);
-- 
cgit v1.2.3


From 8fc2c767b06067b417c565c4e75731e68ed41fd8 Mon Sep 17 00:00:00 2001
From: "Kim B. Heino" <Kim.Heino@bluegiga.com>
Date: Wed, 23 Jul 2008 21:30:34 -0700
Subject: rtc: add support for ST M41T94 SPI RTC

This patch adds kernel driver for M41T94 RTC chip connected via SPI.
I've tested it on two different AT91-based hardwares.

This is third revision of the patch: some comments made by
Alessandro Zummo fixed.

Revision two added support for century bit and fixes.

Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/Kconfig      |   9 +++
 drivers/rtc/Makefile     |   1 +
 drivers/rtc/rtc-m41t94.c | 173 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 183 insertions(+)
 create mode 100644 drivers/rtc/rtc-m41t94.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index fc85bf2e4a9..beffb834c44 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -273,6 +273,15 @@ comment "SPI RTC drivers"
 
 if SPI_MASTER
 
+config RTC_DRV_M41T94
+	tristate "ST M41T94"
+	help
+	  If you say yes here you will get support for the
+	  ST M41T94 SPI RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-m41t94.
+
 config RTC_DRV_MAX6902
 	tristate "Maxim MAX6902"
 	help
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index b5d9d67df88..b0e1af54f80 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_RTC_DRV_EP93XX)	+= rtc-ep93xx.o
 obj-$(CONFIG_RTC_DRV_FM3130)	+= rtc-fm3130.o
 obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
 obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
+obj-$(CONFIG_RTC_DRV_M41T94)	+= rtc-m41t94.o
 obj-$(CONFIG_RTC_DRV_M48T59)	+= rtc-m48t59.o
 obj-$(CONFIG_RTC_DRV_M48T86)	+= rtc-m48t86.o
 obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
diff --git a/drivers/rtc/rtc-m41t94.c b/drivers/rtc/rtc-m41t94.c
new file mode 100644
index 00000000000..9b19499c829
--- /dev/null
+++ b/drivers/rtc/rtc-m41t94.c
@@ -0,0 +1,173 @@
+/*
+ * Driver for ST M41T94 SPI RTC
+ *
+ * Copyright (C) 2008 Kim B. Heino
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+#define M41T94_REG_SECONDS	0x01
+#define M41T94_REG_MINUTES	0x02
+#define M41T94_REG_HOURS	0x03
+#define M41T94_REG_WDAY		0x04
+#define M41T94_REG_DAY		0x05
+#define M41T94_REG_MONTH	0x06
+#define M41T94_REG_YEAR		0x07
+#define M41T94_REG_HT		0x0c
+
+#define M41T94_BIT_HALT		0x40
+#define M41T94_BIT_STOP		0x80
+#define M41T94_BIT_CB		0x40
+#define M41T94_BIT_CEB		0x80
+
+static int m41t94_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u8 buf[8]; /* write cmd + 7 registers */
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	buf[0] = 0x80 | M41T94_REG_SECONDS; /* write time + date */
+	buf[M41T94_REG_SECONDS] = BIN2BCD(tm->tm_sec);
+	buf[M41T94_REG_MINUTES] = BIN2BCD(tm->tm_min);
+	buf[M41T94_REG_HOURS]   = BIN2BCD(tm->tm_hour);
+	buf[M41T94_REG_WDAY]    = BIN2BCD(tm->tm_wday + 1);
+	buf[M41T94_REG_DAY]     = BIN2BCD(tm->tm_mday);
+	buf[M41T94_REG_MONTH]   = BIN2BCD(tm->tm_mon + 1);
+
+	buf[M41T94_REG_HOURS] |= M41T94_BIT_CEB;
+	if (tm->tm_year >= 100)
+		buf[M41T94_REG_HOURS] |= M41T94_BIT_CB;
+	buf[M41T94_REG_YEAR] = BIN2BCD(tm->tm_year % 100);
+
+	return spi_write(spi, buf, 8);
+}
+
+static int m41t94_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u8 buf[2];
+	int ret, hour;
+
+	/* clear halt update bit */
+	ret = spi_w8r8(spi, M41T94_REG_HT);
+	if (ret < 0)
+		return ret;
+	if (ret & M41T94_BIT_HALT) {
+		buf[0] = 0x80 | M41T94_REG_HT;
+		buf[1] = ret & ~M41T94_BIT_HALT;
+		spi_write(spi, buf, 2);
+	}
+
+	/* clear stop bit */
+	ret = spi_w8r8(spi, M41T94_REG_SECONDS);
+	if (ret < 0)
+		return ret;
+	if (ret & M41T94_BIT_STOP) {
+		buf[0] = 0x80 | M41T94_REG_SECONDS;
+		buf[1] = ret & ~M41T94_BIT_STOP;
+		spi_write(spi, buf, 2);
+	}
+
+	tm->tm_sec  = BCD2BIN(spi_w8r8(spi, M41T94_REG_SECONDS));
+	tm->tm_min  = BCD2BIN(spi_w8r8(spi, M41T94_REG_MINUTES));
+	hour = spi_w8r8(spi, M41T94_REG_HOURS);
+	tm->tm_hour = BCD2BIN(hour & 0x3f);
+	tm->tm_wday = BCD2BIN(spi_w8r8(spi, M41T94_REG_WDAY)) - 1;
+	tm->tm_mday = BCD2BIN(spi_w8r8(spi, M41T94_REG_DAY));
+	tm->tm_mon  = BCD2BIN(spi_w8r8(spi, M41T94_REG_MONTH)) - 1;
+	tm->tm_year = BCD2BIN(spi_w8r8(spi, M41T94_REG_YEAR));
+	if ((hour & M41T94_BIT_CB) || !(hour & M41T94_BIT_CEB))
+		tm->tm_year += 100;
+
+	dev_dbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read", tm->tm_sec, tm->tm_min,
+		tm->tm_hour, tm->tm_mday,
+		tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* initial clock setting can be undefined */
+	return rtc_valid_tm(tm);
+}
+
+static const struct rtc_class_ops m41t94_rtc_ops = {
+	.read_time	= m41t94_read_time,
+	.set_time	= m41t94_set_time,
+};
+
+static struct spi_driver m41t94_driver;
+
+static int __devinit m41t94_probe(struct spi_device *spi)
+{
+	struct rtc_device *rtc;
+	int res;
+
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	res = spi_w8r8(spi, M41T94_REG_SECONDS);
+	if (res < 0) {
+		dev_err(&spi->dev, "not found.\n");
+		return res;
+	}
+
+	rtc = rtc_device_register(m41t94_driver.driver.name,
+		&spi->dev, &m41t94_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	dev_set_drvdata(&spi->dev, rtc);
+
+	return 0;
+}
+
+static int __devexit m41t94_remove(struct spi_device *spi)
+{
+	struct rtc_device *rtc = platform_get_drvdata(spi);
+
+	if (rtc)
+		rtc_device_unregister(rtc);
+
+	return 0;
+}
+
+static struct spi_driver m41t94_driver = {
+	.driver = {
+		.name	= "rtc-m41t94",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= m41t94_probe,
+	.remove = __devexit_p(m41t94_remove),
+};
+
+static __init int m41t94_init(void)
+{
+	return spi_register_driver(&m41t94_driver);
+}
+
+module_init(m41t94_init);
+
+static __exit void m41t94_exit(void)
+{
+	spi_unregister_driver(&m41t94_driver);
+}
+
+module_exit(m41t94_exit);
+
+MODULE_AUTHOR("Kim B. Heino <Kim.Heino@bluegiga.com>");
+MODULE_DESCRIPTION("Driver for ST M41T94 SPI RTC");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 53e84b672c1a8190af2b376c35c7a39cf1214f59 Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Wed, 23 Jul 2008 21:30:36 -0700
Subject: rtc: ds1305/ds1306 driver

Support the Dallas/Maxim DS1305 and DS1306 RTC chips.  These use SPI, and
support alarms, NVRAM, and a trickle charger for use when their backup
power supply is a supercap or rechargeable cell.

This basic driver doesn't yet support suspend/resume or wakealarms.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/Kconfig        |  10 +
 drivers/rtc/Makefile       |   1 +
 drivers/rtc/rtc-ds1305.c   | 847 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/spi/ds1305.h |  35 ++
 4 files changed, 893 insertions(+)
 create mode 100644 drivers/rtc/rtc-ds1305.c
 create mode 100644 include/linux/spi/ds1305.h

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index beffb834c44..90ab7382540 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -282,6 +282,16 @@ config RTC_DRV_M41T94
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-m41t94.
 
+config RTC_DRV_DS1305
+	tristate "Dallas/Maxim DS1305/DS1306"
+	help
+	  Select this driver to get support for the Dallas/Maxim DS1305
+	  and DS1306 real time clock chips.  These support a trickle
+	  charger, alarms, and NVRAM in addition to the clock.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1305.
+
 config RTC_DRV_MAX6902
 	tristate "Maxim MAX6902"
 	help
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index b0e1af54f80..18622ef84ca 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_RTC_DRV_BFIN)	+= rtc-bfin.o
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
 obj-$(CONFIG_RTC_DRV_DS1216)	+= rtc-ds1216.o
 obj-$(CONFIG_RTC_DRV_DS1302)	+= rtc-ds1302.o
+obj-$(CONFIG_RTC_DRV_DS1305)	+= rtc-ds1305.o
 obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
 obj-$(CONFIG_RTC_DRV_DS1374)	+= rtc-ds1374.o
 obj-$(CONFIG_RTC_DRV_DS1511)	+= rtc-ds1511.o
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
new file mode 100644
index 00000000000..b91d02a3ace
--- /dev/null
+++ b/drivers/rtc/rtc-ds1305.c
@@ -0,0 +1,847 @@
+/*
+ * rtc-ds1305.c -- driver for DS1305 and DS1306 SPI RTC chips
+ *
+ * Copyright (C) 2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/workqueue.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ds1305.h>
+
+
+/*
+ * Registers ... mask DS1305_WRITE into register address to write,
+ * otherwise you're reading it.  All non-bitmask values are BCD.
+ */
+#define DS1305_WRITE		0x80
+
+
+/* RTC date/time ... the main special cases are that we:
+ *  - Need fancy "hours" encoding in 12hour mode
+ *  - Don't rely on the "day-of-week" field (or tm_wday)
+ *  - Are a 21st-century clock (2000 <= year < 2100)
+ */
+#define DS1305_RTC_LEN		7		/* bytes for RTC regs */
+
+#define DS1305_SEC		0x00		/* register addresses */
+#define DS1305_MIN		0x01
+#define DS1305_HOUR		0x02
+#	define DS1305_HR_12		0x40	/* set == 12 hr mode */
+#	define DS1305_HR_PM		0x20	/* set == PM (12hr mode) */
+#define DS1305_WDAY		0x03
+#define DS1305_MDAY		0x04
+#define DS1305_MON		0x05
+#define DS1305_YEAR		0x06
+
+
+/* The two alarms have only sec/min/hour/wday fields (ALM_LEN).
+ * DS1305_ALM_DISABLE disables a match field (some combos are bad).
+ *
+ * NOTE that since we don't use WDAY, we limit ourselves to alarms
+ * only one day into the future (vs potentially up to a week).
+ *
+ * NOTE ALSO that while we could generate once-a-second IRQs (UIE), we
+ * don't currently support them.  We'd either need to do it only when
+ * no alarm is pending (not the standard model), or to use the second
+ * alarm (implying that this is a DS1305 not DS1306, *and* that either
+ * it's wired up a second IRQ we know, or that INTCN is set)
+ */
+#define DS1305_ALM_LEN		4		/* bytes for ALM regs */
+#define DS1305_ALM_DISABLE	0x80
+
+#define DS1305_ALM0(r)		(0x07 + (r))	/* register addresses */
+#define DS1305_ALM1(r)		(0x0b + (r))
+
+
+/* three control registers */
+#define DS1305_CONTROL_LEN	3		/* bytes of control regs */
+
+#define DS1305_CONTROL		0x0f		/* register addresses */
+#	define DS1305_nEOSC		0x80	/* low enables oscillator */
+#	define DS1305_WP		0x40	/* write protect */
+#	define DS1305_INTCN		0x04	/* clear == only int0 used */
+#	define DS1306_1HZ		0x04	/* enable 1Hz output */
+#	define DS1305_AEI1		0x02	/* enable ALM1 IRQ */
+#	define DS1305_AEI0		0x01	/* enable ALM0 IRQ */
+#define DS1305_STATUS		0x10
+/* status has just AEIx bits, mirrored as IRQFx */
+#define DS1305_TRICKLE		0x11
+/* trickle bits are defined in <linux/spi/ds1305.h> */
+
+/* a bunch of NVRAM */
+#define DS1305_NVRAM_LEN	96		/* bytes of NVRAM */
+
+#define DS1305_NVRAM		0x20		/* register addresses */
+
+
+struct ds1305 {
+	struct spi_device	*spi;
+	struct rtc_device	*rtc;
+
+	struct work_struct	work;
+
+	unsigned long		flags;
+#define FLAG_EXITING	0
+
+	bool			hr12;
+	u8			ctrl[DS1305_CONTROL_LEN];
+};
+
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Utilities ...  tolerate 12-hour AM/PM notation in case of non-Linux
+ * software (like a bootloader) which may require it.
+ */
+
+static unsigned bcd2hour(u8 bcd)
+{
+	if (bcd & DS1305_HR_12) {
+		unsigned	hour = 0;
+
+		bcd &= ~DS1305_HR_12;
+		if (bcd & DS1305_HR_PM) {
+			hour = 12;
+			bcd &= ~DS1305_HR_PM;
+		}
+		hour += BCD2BIN(bcd);
+		return hour - 1;
+	}
+	return BCD2BIN(bcd);
+}
+
+static u8 hour2bcd(bool hr12, int hour)
+{
+	if (hr12) {
+		hour++;
+		if (hour <= 12)
+			return DS1305_HR_12 | BIN2BCD(hour);
+		hour -= 12;
+		return DS1305_HR_12 | DS1305_HR_PM | BIN2BCD(hour);
+	}
+	return BIN2BCD(hour);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Interface to RTC framework
+ */
+
+#ifdef CONFIG_RTC_INTF_DEV
+
+/*
+ * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
+ */
+static int ds1305_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	u8		buf[2];
+	int		status = -ENOIOCTLCMD;
+
+	buf[0] = DS1305_WRITE | DS1305_CONTROL;
+	buf[1] = ds1305->ctrl[0];
+
+	switch (cmd) {
+	case RTC_AIE_OFF:
+		status = 0;
+		if (!(buf[1] & DS1305_AEI0))
+			goto done;
+		buf[1] &= ~DS1305_AEI0;
+		break;
+
+	case RTC_AIE_ON:
+		status = 0;
+		if (ds1305->ctrl[0] & DS1305_AEI0)
+			goto done;
+		buf[1] |= DS1305_AEI0;
+		break;
+	}
+	if (status == 0) {
+		status = spi_write_then_read(ds1305->spi, buf, sizeof buf,
+				NULL, 0);
+		if (status >= 0)
+			ds1305->ctrl[0] = buf[1];
+	}
+
+done:
+	return status;
+}
+
+#else
+#define ds1305_ioctl	NULL
+#endif
+
+/*
+ * Get/set of date and time is pretty normal.
+ */
+
+static int ds1305_get_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	u8		addr = DS1305_SEC;
+	u8		buf[DS1305_RTC_LEN];
+	int		status;
+
+	/* Use write-then-read to get all the date/time registers
+	 * since dma from stack is nonportable
+	 */
+	status = spi_write_then_read(ds1305->spi, &addr, sizeof addr,
+			buf, sizeof buf);
+	if (status < 0)
+		return status;
+
+	dev_vdbg(dev, "%s: %02x %02x %02x, %02x %02x %02x %02x\n",
+		"read", buf[0], buf[1], buf[2], buf[3],
+		buf[4], buf[5], buf[6]);
+
+	/* Decode the registers */
+	time->tm_sec = BCD2BIN(buf[DS1305_SEC]);
+	time->tm_min = BCD2BIN(buf[DS1305_MIN]);
+	time->tm_hour = bcd2hour(buf[DS1305_HOUR]);
+	time->tm_wday = buf[DS1305_WDAY] - 1;
+	time->tm_mday = BCD2BIN(buf[DS1305_MDAY]);
+	time->tm_mon = BCD2BIN(buf[DS1305_MON]) - 1;
+	time->tm_year = BCD2BIN(buf[DS1305_YEAR]) + 100;
+
+	dev_vdbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"read", time->tm_sec, time->tm_min,
+		time->tm_hour, time->tm_mday,
+		time->tm_mon, time->tm_year, time->tm_wday);
+
+	/* Time may not be set */
+	return rtc_valid_tm(time);
+}
+
+static int ds1305_set_time(struct device *dev, struct rtc_time *time)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	u8		buf[1 + DS1305_RTC_LEN];
+	u8		*bp = buf;
+
+	dev_vdbg(dev, "%s secs=%d, mins=%d, "
+		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+		"write", time->tm_sec, time->tm_min,
+		time->tm_hour, time->tm_mday,
+		time->tm_mon, time->tm_year, time->tm_wday);
+
+	/* Write registers starting at the first time/date address. */
+	*bp++ = DS1305_WRITE | DS1305_SEC;
+
+	*bp++ = BIN2BCD(time->tm_sec);
+	*bp++ = BIN2BCD(time->tm_min);
+	*bp++ = hour2bcd(ds1305->hr12, time->tm_hour);
+	*bp++ = (time->tm_wday < 7) ? (time->tm_wday + 1) : 1;
+	*bp++ = BIN2BCD(time->tm_mday);
+	*bp++ = BIN2BCD(time->tm_mon + 1);
+	*bp++ = BIN2BCD(time->tm_year - 100);
+
+	dev_dbg(dev, "%s: %02x %02x %02x, %02x %02x %02x %02x\n",
+		"write", buf[1], buf[2], buf[3],
+		buf[4], buf[5], buf[6], buf[7]);
+
+	/* use write-then-read since dma from stack is nonportable */
+	return spi_write_then_read(ds1305->spi, buf, sizeof buf,
+			NULL, 0);
+}
+
+/*
+ * Get/set of alarm is a bit funky:
+ *
+ * - First there's the inherent raciness of getting the (partitioned)
+ *   status of an alarm that could trigger while we're reading parts
+ *   of that status.
+ *
+ * - Second there's its limited range (we could increase it a bit by
+ *   relying on WDAY), which means it will easily roll over.
+ *
+ * - Third there's the choice of two alarms and alarm signals.
+ *   Here we use ALM0 and expect that nINT0 (open drain) is used;
+ *   that's the only real option for DS1306 runtime alarms, and is
+ *   natural on DS1305.
+ *
+ * - Fourth, there's also ALM1, and a second interrupt signal:
+ *     + On DS1305 ALM1 uses nINT1 (when INTCN=1) else nINT0;
+ *     + On DS1306 ALM1 only uses INT1 (an active high pulse)
+ *       and it won't work when VCC1 is active.
+ *
+ *   So to be most general, we should probably set both alarms to the
+ *   same value, letting ALM1 be the wakeup event source on DS1306
+ *   and handling several wiring options on DS1305.
+ *
+ * - Fifth, we support the polled mode (as well as possible; why not?)
+ *   even when no interrupt line is wired to an IRQ.
+ */
+
+/*
+ * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
+ */
+static int ds1305_get_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	struct spi_device *spi = ds1305->spi;
+	u8		addr;
+	int		status;
+	u8		buf[DS1305_ALM_LEN];
+
+	/* Refresh control register cache BEFORE reading ALM0 registers,
+	 * since reading alarm registers acks any pending IRQ.  That
+	 * makes returning "pending" status a bit of a lie, but that bit
+	 * of EFI status is at best fragile anyway (given IRQ handlers).
+	 */
+	addr = DS1305_CONTROL;
+	status = spi_write_then_read(spi, &addr, sizeof addr,
+			ds1305->ctrl, sizeof ds1305->ctrl);
+	if (status < 0)
+		return status;
+
+	alm->enabled = !!(ds1305->ctrl[0] & DS1305_AEI0);
+	alm->pending = !!(ds1305->ctrl[1] & DS1305_AEI0);
+
+	/* get and check ALM0 registers */
+	addr = DS1305_ALM0(DS1305_SEC);
+	status = spi_write_then_read(spi, &addr, sizeof addr,
+			buf, sizeof buf);
+	if (status < 0)
+		return status;
+
+	dev_vdbg(dev, "%s: %02x %02x %02x %02x\n",
+		"alm0 read", buf[DS1305_SEC], buf[DS1305_MIN],
+		buf[DS1305_HOUR], buf[DS1305_WDAY]);
+
+	if ((DS1305_ALM_DISABLE & buf[DS1305_SEC])
+			|| (DS1305_ALM_DISABLE & buf[DS1305_MIN])
+			|| (DS1305_ALM_DISABLE & buf[DS1305_HOUR]))
+		return -EIO;
+
+	/* Stuff these values into alm->time and let RTC framework code
+	 * fill in the rest ... and also handle rollover to tomorrow when
+	 * that's needed.
+	 */
+	alm->time.tm_sec = BCD2BIN(buf[DS1305_SEC]);
+	alm->time.tm_min = BCD2BIN(buf[DS1305_MIN]);
+	alm->time.tm_hour = bcd2hour(buf[DS1305_HOUR]);
+	alm->time.tm_mday = -1;
+	alm->time.tm_mon = -1;
+	alm->time.tm_year = -1;
+	/* next three fields are unused by Linux */
+	alm->time.tm_wday = -1;
+	alm->time.tm_mday = -1;
+	alm->time.tm_isdst = -1;
+
+	return 0;
+}
+
+/*
+ * Context: caller holds rtc->ops_lock (to protect ds1305->ctrl)
+ */
+static int ds1305_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	struct spi_device *spi = ds1305->spi;
+	unsigned long	now, later;
+	struct rtc_time	tm;
+	int		status;
+	u8		buf[1 + DS1305_ALM_LEN];
+
+	/* convert desired alarm to time_t */
+	status = rtc_tm_to_time(&alm->time, &later);
+	if (status < 0)
+		return status;
+
+	/* Read current time as time_t */
+	status = ds1305_get_time(dev, &tm);
+	if (status < 0)
+		return status;
+	status = rtc_tm_to_time(&tm, &now);
+	if (status < 0)
+		return status;
+
+	/* make sure alarm fires within the next 24 hours */
+	if (later <= now)
+		return -EINVAL;
+	if ((later - now) > 24 * 60 * 60)
+		return -EDOM;
+
+	/* disable alarm if needed */
+	if (ds1305->ctrl[0] & DS1305_AEI0) {
+		ds1305->ctrl[0] &= ~DS1305_AEI0;
+
+		buf[0] = DS1305_WRITE | DS1305_CONTROL;
+		buf[1] = ds1305->ctrl[0];
+		status = spi_write_then_read(ds1305->spi, buf, 2, NULL, 0);
+		if (status < 0)
+			return status;
+	}
+
+	/* write alarm */
+	buf[0] = DS1305_WRITE | DS1305_ALM0(DS1305_SEC);
+	buf[1 + DS1305_SEC] = BIN2BCD(alm->time.tm_sec);
+	buf[1 + DS1305_MIN] = BIN2BCD(alm->time.tm_min);
+	buf[1 + DS1305_HOUR] = hour2bcd(ds1305->hr12, alm->time.tm_hour);
+	buf[1 + DS1305_WDAY] = DS1305_ALM_DISABLE;
+
+	dev_dbg(dev, "%s: %02x %02x %02x %02x\n",
+		"alm0 write", buf[1 + DS1305_SEC], buf[1 + DS1305_MIN],
+		buf[1 + DS1305_HOUR], buf[1 + DS1305_WDAY]);
+
+	status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
+	if (status < 0)
+		return status;
+
+	/* enable alarm if requested */
+	if (alm->enabled) {
+		ds1305->ctrl[0] |= DS1305_AEI0;
+
+		buf[0] = DS1305_WRITE | DS1305_CONTROL;
+		buf[1] = ds1305->ctrl[0];
+		status = spi_write_then_read(ds1305->spi, buf, 2, NULL, 0);
+	}
+
+	return status;
+}
+
+#ifdef CONFIG_PROC_FS
+
+static int ds1305_proc(struct device *dev, struct seq_file *seq)
+{
+	struct ds1305	*ds1305 = dev_get_drvdata(dev);
+	char		*diodes = "no";
+	char		*resistors = "";
+
+	/* ctrl[2] is treated as read-only; no locking needed */
+	if ((ds1305->ctrl[2] & 0xf0) == DS1305_TRICKLE_MAGIC) {
+		switch (ds1305->ctrl[2] & 0x0c) {
+		case DS1305_TRICKLE_DS2:
+			diodes = "2 diodes, ";
+			break;
+		case DS1305_TRICKLE_DS1:
+			diodes = "1 diode, ";
+			break;
+		default:
+			goto done;
+		}
+		switch (ds1305->ctrl[2] & 0x03) {
+		case DS1305_TRICKLE_2K:
+			resistors = "2k Ohm";
+			break;
+		case DS1305_TRICKLE_4K:
+			resistors = "4k Ohm";
+			break;
+		case DS1305_TRICKLE_8K:
+			resistors = "8k Ohm";
+			break;
+		default:
+			diodes = "no";
+			break;
+		}
+	}
+
+done:
+	return seq_printf(seq,
+			"trickle_charge\t: %s%s\n",
+			diodes, resistors);
+}
+
+#else
+#define ds1305_proc	NULL
+#endif
+
+static const struct rtc_class_ops ds1305_ops = {
+	.ioctl		= ds1305_ioctl,
+	.read_time	= ds1305_get_time,
+	.set_time	= ds1305_set_time,
+	.read_alarm	= ds1305_get_alarm,
+	.set_alarm	= ds1305_set_alarm,
+	.proc		= ds1305_proc,
+};
+
+static void ds1305_work(struct work_struct *work)
+{
+	struct ds1305	*ds1305 = container_of(work, struct ds1305, work);
+	struct mutex	*lock = &ds1305->rtc->ops_lock;
+	struct spi_device *spi = ds1305->spi;
+	u8		buf[3];
+	int		status;
+
+	/* lock to protect ds1305->ctrl */
+	mutex_lock(lock);
+
+	/* Disable the IRQ, and clear its status ... for now, we "know"
+	 * that if more than one alarm is active, they're in sync.
+	 * Note that reading ALM data registers also clears IRQ status.
+	 */
+	ds1305->ctrl[0] &= ~(DS1305_AEI1 | DS1305_AEI0);
+	ds1305->ctrl[1] = 0;
+
+	buf[0] = DS1305_WRITE | DS1305_CONTROL;
+	buf[1] = ds1305->ctrl[0];
+	buf[2] = 0;
+
+	status = spi_write_then_read(spi, buf, sizeof buf,
+			NULL, 0);
+	if (status < 0)
+		dev_dbg(&spi->dev, "clear irq --> %d\n", status);
+
+	mutex_unlock(lock);
+
+	if (!test_bit(FLAG_EXITING, &ds1305->flags))
+		enable_irq(spi->irq);
+
+	/* rtc_update_irq() requires an IRQ-disabled context */
+	local_irq_disable();
+	rtc_update_irq(ds1305->rtc, 1, RTC_AF | RTC_IRQF);
+	local_irq_enable();
+}
+
+/*
+ * This "real" IRQ handler hands off to a workqueue mostly to allow
+ * mutex locking for ds1305->ctrl ... unlike I2C, we could issue async
+ * I/O requests in IRQ context (to clear the IRQ status).
+ */
+static irqreturn_t ds1305_irq(int irq, void *p)
+{
+	struct ds1305		*ds1305 = p;
+
+	disable_irq(irq);
+	schedule_work(&ds1305->work);
+	return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Interface for NVRAM
+ */
+
+static void msg_init(struct spi_message *m, struct spi_transfer *x,
+		u8 *addr, size_t count, char *tx, char *rx)
+{
+	spi_message_init(m);
+	memset(x, 0, 2 * sizeof(*x));
+
+	x->tx_buf = addr;
+	x->len = 1;
+	spi_message_add_tail(x, m);
+
+	x++;
+
+	x->tx_buf = tx;
+	x->rx_buf = rx;
+	x->len = count;
+	spi_message_add_tail(x, m);
+}
+
+static ssize_t
+ds1305_nvram_read(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct spi_device	*spi;
+	u8			addr;
+	struct spi_message	m;
+	struct spi_transfer	x[2];
+	int			status;
+
+	spi = container_of(kobj, struct spi_device, dev.kobj);
+
+	if (unlikely(off >= DS1305_NVRAM_LEN))
+		return 0;
+	if (count >= DS1305_NVRAM_LEN)
+		count = DS1305_NVRAM_LEN;
+	if ((off + count) > DS1305_NVRAM_LEN)
+		count = DS1305_NVRAM_LEN - off;
+	if (unlikely(!count))
+		return count;
+
+	addr = DS1305_NVRAM + off;
+	msg_init(&m, x, &addr, count, NULL, buf);
+
+	status = spi_sync(spi, &m);
+	if (status < 0)
+		dev_err(&spi->dev, "nvram %s error %d\n", "read", status);
+	return (status < 0) ? status : count;
+}
+
+static ssize_t
+ds1305_nvram_write(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct spi_device	*spi;
+	u8			addr;
+	struct spi_message	m;
+	struct spi_transfer	x[2];
+	int			status;
+
+	spi = container_of(kobj, struct spi_device, dev.kobj);
+
+	if (unlikely(off >= DS1305_NVRAM_LEN))
+		return -EFBIG;
+	if (count >= DS1305_NVRAM_LEN)
+		count = DS1305_NVRAM_LEN;
+	if ((off + count) > DS1305_NVRAM_LEN)
+		count = DS1305_NVRAM_LEN - off;
+	if (unlikely(!count))
+		return count;
+
+	addr = (DS1305_WRITE | DS1305_NVRAM) + off;
+	msg_init(&m, x, &addr, count, buf, NULL);
+
+	status = spi_sync(spi, &m);
+	if (status < 0)
+		dev_err(&spi->dev, "nvram %s error %d\n", "write", status);
+	return (status < 0) ? status : count;
+}
+
+static struct bin_attribute nvram = {
+	.attr.name	= "nvram",
+	.attr.mode	= S_IRUGO | S_IWUSR,
+	.attr.owner	= THIS_MODULE,
+	.read		= ds1305_nvram_read,
+	.write		= ds1305_nvram_write,
+	.size		= DS1305_NVRAM_LEN,
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Interface to SPI stack
+ */
+
+static int __devinit ds1305_probe(struct spi_device *spi)
+{
+	struct ds1305			*ds1305;
+	struct rtc_device		*rtc;
+	int				status;
+	u8				addr, value;
+	struct ds1305_platform_data	*pdata = spi->dev.platform_data;
+	bool				write_ctrl = false;
+
+	/* Sanity check board setup data.  This may be hooked up
+	 * in 3wire mode, but we don't care.  Note that unless
+	 * there's an inverter in place, this needs SPI_CS_HIGH!
+	 */
+	if ((spi->bits_per_word && spi->bits_per_word != 8)
+			|| (spi->max_speed_hz > 2000000)
+			|| !(spi->mode & SPI_CPHA))
+		return -EINVAL;
+
+	/* set up driver data */
+	ds1305 = kzalloc(sizeof *ds1305, GFP_KERNEL);
+	if (!ds1305)
+		return -ENOMEM;
+	ds1305->spi = spi;
+	spi_set_drvdata(spi, ds1305);
+
+	/* read and cache control registers */
+	addr = DS1305_CONTROL;
+	status = spi_write_then_read(spi, &addr, sizeof addr,
+			ds1305->ctrl, sizeof ds1305->ctrl);
+	if (status < 0) {
+		dev_dbg(&spi->dev, "can't %s, %d\n",
+				"read", status);
+		goto fail0;
+	}
+
+	dev_dbg(&spi->dev, "ctrl %s: %02x %02x %02x\n",
+			"read", ds1305->ctrl[0],
+			ds1305->ctrl[1], ds1305->ctrl[2]);
+
+	/* Sanity check register values ... partially compensating for the
+	 * fact that SPI has no device handshake.  A pullup on MISO would
+	 * make these tests fail; but not all systems will have one.  If
+	 * some register is neither 0x00 nor 0xff, a chip is likely there.
+	 */
+	if ((ds1305->ctrl[0] & 0x38) != 0 || (ds1305->ctrl[1] & 0xfc) != 0) {
+		dev_dbg(&spi->dev, "RTC chip is not present\n");
+		status = -ENODEV;
+		goto fail0;
+	}
+	if (ds1305->ctrl[2] == 0)
+		dev_dbg(&spi->dev, "chip may not be present\n");
+
+	/* enable writes if needed ... if we were paranoid it would
+	 * make sense to enable them only when absolutely necessary.
+	 */
+	if (ds1305->ctrl[0] & DS1305_WP) {
+		u8		buf[2];
+
+		ds1305->ctrl[0] &= ~DS1305_WP;
+
+		buf[0] = DS1305_WRITE | DS1305_CONTROL;
+		buf[1] = ds1305->ctrl[0];
+		status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
+
+		dev_dbg(&spi->dev, "clear WP --> %d\n", status);
+		if (status < 0)
+			goto fail0;
+	}
+
+	/* on DS1305, maybe start oscillator; like most low power
+	 * oscillators, it may take a second to stabilize
+	 */
+	if (ds1305->ctrl[0] & DS1305_nEOSC) {
+		ds1305->ctrl[0] &= ~DS1305_nEOSC;
+		write_ctrl = true;
+		dev_warn(&spi->dev, "SET TIME!\n");
+	}
+
+	/* ack any pending IRQs */
+	if (ds1305->ctrl[1]) {
+		ds1305->ctrl[1] = 0;
+		write_ctrl = true;
+	}
+
+	/* this may need one-time (re)init */
+	if (pdata) {
+		/* maybe enable trickle charge */
+		if (((ds1305->ctrl[2] & 0xf0) != DS1305_TRICKLE_MAGIC)) {
+			ds1305->ctrl[2] = DS1305_TRICKLE_MAGIC
+						| pdata->trickle;
+			write_ctrl = true;
+		}
+
+		/* on DS1306, configure 1 Hz signal */
+		if (pdata->is_ds1306) {
+			if (pdata->en_1hz) {
+				if (!(ds1305->ctrl[0] & DS1306_1HZ)) {
+					ds1305->ctrl[0] |= DS1306_1HZ;
+					write_ctrl = true;
+				}
+			} else {
+				if (ds1305->ctrl[0] & DS1306_1HZ) {
+					ds1305->ctrl[0] &= ~DS1306_1HZ;
+					write_ctrl = true;
+				}
+			}
+		}
+	}
+
+	if (write_ctrl) {
+		u8		buf[4];
+
+		buf[0] = DS1305_WRITE | DS1305_CONTROL;
+		buf[1] = ds1305->ctrl[0];
+		buf[2] = ds1305->ctrl[1];
+		buf[3] = ds1305->ctrl[2];
+		status = spi_write_then_read(spi, buf, sizeof buf, NULL, 0);
+		if (status < 0) {
+			dev_dbg(&spi->dev, "can't %s, %d\n",
+					"write", status);
+			goto fail0;
+		}
+
+		dev_dbg(&spi->dev, "ctrl %s: %02x %02x %02x\n",
+				"write", ds1305->ctrl[0],
+				ds1305->ctrl[1], ds1305->ctrl[2]);
+	}
+
+	/* see if non-Linux software set up AM/PM mode */
+	addr = DS1305_HOUR;
+	status = spi_write_then_read(spi, &addr, sizeof addr,
+				&value, sizeof value);
+	if (status < 0) {
+		dev_dbg(&spi->dev, "read HOUR --> %d\n", status);
+		goto fail0;
+	}
+
+	ds1305->hr12 = (DS1305_HR_12 & value) != 0;
+	if (ds1305->hr12)
+		dev_dbg(&spi->dev, "AM/PM\n");
+
+	/* register RTC ... from here on, ds1305->ctrl needs locking */
+	rtc = rtc_device_register("ds1305", &spi->dev,
+			&ds1305_ops, THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		status = PTR_ERR(rtc);
+		dev_dbg(&spi->dev, "register rtc --> %d\n", status);
+		goto fail0;
+	}
+	ds1305->rtc = rtc;
+
+	/* Maybe set up alarm IRQ; be ready to handle it triggering right
+	 * away.  NOTE that we don't share this.  The signal is active low,
+	 * and we can't ack it before a SPI message delay.  We temporarily
+	 * disable the IRQ until it's acked, which lets us work with more
+	 * IRQ trigger modes (not all IRQ controllers can do falling edge).
+	 */
+	if (spi->irq) {
+		INIT_WORK(&ds1305->work, ds1305_work);
+		status = request_irq(spi->irq, ds1305_irq,
+				0, dev_name(&rtc->dev), ds1305);
+		if (status < 0) {
+			dev_dbg(&spi->dev, "request_irq %d --> %d\n",
+					spi->irq, status);
+			goto fail1;
+		}
+	}
+
+	/* export NVRAM */
+	status = sysfs_create_bin_file(&spi->dev.kobj, &nvram);
+	if (status < 0) {
+		dev_dbg(&spi->dev, "register nvram --> %d\n", status);
+		goto fail2;
+	}
+
+	return 0;
+
+fail2:
+	free_irq(spi->irq, ds1305);
+fail1:
+	rtc_device_unregister(rtc);
+fail0:
+	kfree(ds1305);
+	return status;
+}
+
+static int __devexit ds1305_remove(struct spi_device *spi)
+{
+	struct ds1305	*ds1305 = spi_get_drvdata(spi);
+
+	sysfs_remove_bin_file(&spi->dev.kobj, &nvram);
+
+	/* carefully shut down irq and workqueue, if present */
+	if (spi->irq) {
+		set_bit(FLAG_EXITING, &ds1305->flags);
+		free_irq(spi->irq, ds1305);
+		flush_scheduled_work();
+	}
+
+	rtc_device_unregister(ds1305->rtc);
+	spi_set_drvdata(spi, NULL);
+	kfree(ds1305);
+	return 0;
+}
+
+static struct spi_driver ds1305_driver = {
+	.driver.name	= "rtc-ds1305",
+	.driver.owner	= THIS_MODULE,
+	.probe		= ds1305_probe,
+	.remove		= __devexit_p(ds1305_remove),
+	/* REVISIT add suspend/resume */
+};
+
+static int __init ds1305_init(void)
+{
+	return spi_register_driver(&ds1305_driver);
+}
+module_init(ds1305_init);
+
+static void __exit ds1305_exit(void)
+{
+	spi_unregister_driver(&ds1305_driver);
+}
+module_exit(ds1305_exit);
+
+MODULE_DESCRIPTION("RTC driver for DS1305 and DS1306 chips");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/spi/ds1305.h b/include/linux/spi/ds1305.h
new file mode 100644
index 00000000000..287ec830eab
--- /dev/null
+++ b/include/linux/spi/ds1305.h
@@ -0,0 +1,35 @@
+#ifndef __LINUX_SPI_DS1305_H
+#define __LINUX_SPI_DS1305_H
+
+/*
+ * One-time configuration for ds1305 and ds1306 RTC chips.
+ *
+ * Put a pointer to this in spi_board_info.platform_data if you want to
+ * be sure that Linux (re)initializes this as needed ... after losing
+ * backup power, and potentially on the first boot.
+ */
+struct ds1305_platform_data {
+
+	/* Trickle charge configuration:  it's OK to leave out the MAGIC
+	 * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K.
+	 */
+#define DS1305_TRICKLE_MAGIC	0xa0
+#define DS1305_TRICKLE_DS2	0x08	/* two diodes */
+#define DS1305_TRICKLE_DS1	0x04	/* one diode */
+#define DS1305_TRICKLE_2K	0x01	/* 2 KOhm resistance */
+#define DS1305_TRICKLE_4K	0x02	/* 4 KOhm resistance */
+#define DS1305_TRICKLE_8K	0x03	/* 8 KOhm resistance */
+	u8	trickle;
+
+	/* set only on ds1306 parts */
+	bool	is_ds1306;
+
+	/* ds1306 only:  enable 1 Hz output */
+	bool	en_1hz;
+
+	/* REVISIT:  the driver currently expects nINT0 to be wired
+	 * as the alarm IRQ.  ALM1 may also need to be set up ...
+	 */
+};
+
+#endif /* __LINUX_SPI_DS1305_H */
-- 
cgit v1.2.3


From d3de851a445123f24ad8ece18662014b5e8a8b4e Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Wed, 23 Jul 2008 21:30:37 -0700
Subject: rtc: BCD codeshrink

This updates <linux/bcd.h> to define the key routines as constant
functions, which the macros will then call.  Newer code can now call
bcd2bin() instead of SCREAMING BCD2BIN() TO THE FOUR WINDS.

This lets each driver shrink their codespace by using N function calls to
a single (global) copy of those routines, instead of N inlined copies of
these functions per driver.

These routines aren't used in speed-critical code.  Almost all callers are
in the RTC framework.  Typical per-driver savings is near 300 bytes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Adrian Bunk <bunk@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/bcd.h |  9 +++++++--
 lib/Makefile        |  2 +-
 lib/bcd.c           | 14 ++++++++++++++
 3 files changed, 22 insertions(+), 3 deletions(-)
 create mode 100644 lib/bcd.c

diff --git a/include/linux/bcd.h b/include/linux/bcd.h
index c545308125b..7ac518e3c15 100644
--- a/include/linux/bcd.h
+++ b/include/linux/bcd.h
@@ -10,8 +10,13 @@
 #ifndef _BCD_H
 #define _BCD_H
 
-#define BCD2BIN(val)	(((val) & 0x0f) + ((val)>>4)*10)
-#define BIN2BCD(val)	((((val)/10)<<4) + (val)%10)
+#include <linux/compiler.h>
+
+unsigned bcd2bin(unsigned char val) __attribute_const__;
+unsigned char bin2bcd(unsigned val) __attribute_const__;
+
+#define BCD2BIN(val)	bcd2bin(val)
+#define BIN2BCD(val)	bin2bcd(val)
 
 /* backwards compat */
 #define BCD_TO_BIN(val) ((val)=BCD2BIN(val))
diff --git a/lib/Makefile b/lib/Makefile
index 818c4d45551..9085ad6fa53 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -18,7 +18,7 @@ lib-$(CONFIG_SMP) += cpumask.o
 
 lib-y	+= kobject.o kref.o klist.o
 
-obj-y += div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
+obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
 	 bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o
 
 ifeq ($(CONFIG_DEBUG_KOBJECT),y)
diff --git a/lib/bcd.c b/lib/bcd.c
new file mode 100644
index 00000000000..d74257fd0fe
--- /dev/null
+++ b/lib/bcd.c
@@ -0,0 +1,14 @@
+#include <linux/bcd.h>
+#include <linux/module.h>
+
+unsigned bcd2bin(unsigned char val)
+{
+	return (val & 0x0f) + (val >> 4) * 10;
+}
+EXPORT_SYMBOL(bcd2bin);
+
+unsigned char bin2bcd(unsigned val)
+{
+	return ((val / 10) << 4) + val % 10;
+}
+EXPORT_SYMBOL(bin2bcd);
-- 
cgit v1.2.3


From 71fc822455ccb63a66be0b6e97a415aceb0062c6 Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Wed, 23 Jul 2008 21:30:38 -0700
Subject: rtc: rtc-omap footprint shrinkage

Shrink the runtime footprint of the OMAP1 RTC driver a bunch by removing
some old hacks and switching to platform_driver_probe().

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-omap.c | 21 ++++-----------------
 1 file changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index eb23d8423f4..8876605d4d4 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -92,18 +92,6 @@
 #define rtc_write(val, addr)	omap_writeb(val, OMAP_RTC_BASE + (addr))
 
 
-/* platform_bus isn't hotpluggable, so for static linkage it'd be safe
- * to get rid of probe() and remove() code ... too bad the driver struct
- * remembers probe(), that's about 25% of the runtime footprint!!
- */
-#ifndef	MODULE
-#undef	__devexit
-#undef	__devexit_p
-#define	__devexit	__exit
-#define	__devexit_p	__exit_p
-#endif
-
-
 /* we rely on the rtc framework to handle locking (rtc->ops_lock),
  * so the only other requirement is that register accesses which
  * require BUSY to be clear are made with IRQs locally disabled
@@ -324,7 +312,7 @@ static struct rtc_class_ops omap_rtc_ops = {
 static int omap_rtc_alarm;
 static int omap_rtc_timer;
 
-static int __devinit omap_rtc_probe(struct platform_device *pdev)
+static int __init omap_rtc_probe(struct platform_device *pdev)
 {
 	struct resource		*res, *mem;
 	struct rtc_device	*rtc;
@@ -440,7 +428,7 @@ fail:
 	return -EIO;
 }
 
-static int __devexit omap_rtc_remove(struct platform_device *pdev)
+static int __exit omap_rtc_remove(struct platform_device *pdev)
 {
 	struct rtc_device	*rtc = platform_get_drvdata(pdev);;
 
@@ -498,8 +486,7 @@ static void omap_rtc_shutdown(struct platform_device *pdev)
 
 MODULE_ALIAS("platform:omap_rtc");
 static struct platform_driver omap_rtc_driver = {
-	.probe		= omap_rtc_probe,
-	.remove		= __devexit_p(omap_rtc_remove),
+	.remove		= __exit_p(omap_rtc_remove),
 	.suspend	= omap_rtc_suspend,
 	.resume		= omap_rtc_resume,
 	.shutdown	= omap_rtc_shutdown,
@@ -511,7 +498,7 @@ static struct platform_driver omap_rtc_driver = {
 
 static int __init rtc_init(void)
 {
-	return platform_driver_register(&omap_rtc_driver);
+	return platform_driver_probe(&omap_rtc_driver, omap_rtc_probe);
 }
 module_init(rtc_init);
 
-- 
cgit v1.2.3


From 02bb584f3b1cfc8188522a4d2c8881b65073a4f1 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Wed, 23 Jul 2008 21:30:39 -0700
Subject: rtc: convert the PCF8583 driver to the new I2C style framework with
 device_ids

Convert the PCF8583 driver to the new I2C style framework with device_ids

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-pcf8583.c | 129 ++++++++++++++--------------------------------
 1 file changed, 39 insertions(+), 90 deletions(-)

diff --git a/drivers/rtc/rtc-pcf8583.c b/drivers/rtc/rtc-pcf8583.c
index 3d09d8f0b1f..d388c662bf4 100644
--- a/drivers/rtc/rtc-pcf8583.c
+++ b/drivers/rtc/rtc-pcf8583.c
@@ -2,6 +2,7 @@
  *  drivers/rtc/rtc-pcf8583.c
  *
  *  Copyright (C) 2000 Russell King
+ *  Copyright (C) 2008 Wolfram Sang & Juergen Beisert, Pengutronix
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
-#include <linux/string.h>
 #include <linux/rtc.h>
 #include <linux/init.h>
 #include <linux/errno.h>
@@ -27,7 +27,6 @@ struct rtc_mem {
 };
 
 struct pcf8583 {
-	struct i2c_client client;
 	struct rtc_device *rtc;
 	unsigned char ctrl;
 };
@@ -40,10 +39,6 @@ struct pcf8583 {
 #define CTRL_ALARM	0x02
 #define CTRL_TIMER	0x01
 
-static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
-
-/* Module parameters */
-I2C_CLIENT_INSMOD;
 
 static struct i2c_driver pcf8583_driver;
 
@@ -269,106 +264,60 @@ static const struct rtc_class_ops pcf8583_rtc_ops = {
 	.set_time	= pcf8583_rtc_set_time,
 };
 
-static int pcf8583_probe(struct i2c_adapter *adap, int addr, int kind);
-
-static int pcf8583_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, pcf8583_probe);
-}
-
-static int pcf8583_detach(struct i2c_client *client)
-{
-	int err;
-	struct pcf8583 *pcf = i2c_get_clientdata(client);
-	struct rtc_device *rtc = pcf->rtc;
-
-	if (rtc)
-		rtc_device_unregister(rtc);
-
-	if ((err = i2c_detach_client(client)))
-		return err;
-
-	kfree(pcf);
-	return 0;
-}
-
-static struct i2c_driver pcf8583_driver = {
-	.driver = {
-		.name	= "pcf8583",
-	},
-	.id		= I2C_DRIVERID_PCF8583,
-	.attach_adapter	= pcf8583_attach,
-	.detach_client	= pcf8583_detach,
-};
-
-static int pcf8583_probe(struct i2c_adapter *adap, int addr, int kind)
+static int pcf8583_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
 {
-	struct pcf8583 *pcf;
-	struct i2c_client *client;
-	struct rtc_device *rtc;
-	unsigned char buf[1], ad[1] = { 0 };
+	struct pcf8583 *pcf8583;
 	int err;
-	struct i2c_msg msgs[2] = {
-		{
-			.addr = addr,
-			.flags = 0,
-			.len = 1,
-			.buf = ad,
-		}, {
-			.addr = addr,
-			.flags = I2C_M_RD,
-			.len = 1,
-			.buf = buf,
-		}
-	};
 
-	if (!i2c_check_functionality(adap, I2C_FUNC_I2C))
-		return 0;
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
 
-	pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
-	if (!pcf)
+	pcf8583 = kzalloc(sizeof(struct pcf8583), GFP_KERNEL);
+	if (!pcf8583)
 		return -ENOMEM;
 
-	client = &pcf->client;
+	pcf8583->rtc = rtc_device_register(pcf8583_driver.driver.name,
+			&client->dev, &pcf8583_rtc_ops, THIS_MODULE);
 
-	client->addr		= addr;
-	client->adapter	= adap;
-	client->driver	= &pcf8583_driver;
-
-	strlcpy(client->name, pcf8583_driver.driver.name, I2C_NAME_SIZE);
-
-	if (i2c_transfer(client->adapter, msgs, 2) != 2) {
-		err = -EIO;
+	if (IS_ERR(pcf8583->rtc)) {
+		err = PTR_ERR(pcf8583->rtc);
 		goto exit_kfree;
 	}
 
-	err = i2c_attach_client(client);
-
-	if (err)
-		goto exit_kfree;
-
-	rtc = rtc_device_register(pcf8583_driver.driver.name, &client->dev,
-				  &pcf8583_rtc_ops, THIS_MODULE);
+	i2c_set_clientdata(client, pcf8583);
+	return 0;
 
-	if (IS_ERR(rtc)) {
-		err = PTR_ERR(rtc);
-		goto exit_detach;
-	}
+exit_kfree:
+	kfree(pcf8583);
+	return err;
+}
 
-	pcf->rtc = rtc;
-	i2c_set_clientdata(client, pcf);
-	set_ctrl(client, buf[0]);
+static int __devexit pcf8583_remove(struct i2c_client *client)
+{
+	struct pcf8583 *pcf8583 = i2c_get_clientdata(client);
 
+	if (pcf8583->rtc)
+		rtc_device_unregister(pcf8583->rtc);
+	kfree(pcf8583);
 	return 0;
+}
 
-exit_detach:
-	i2c_detach_client(client);
-
-exit_kfree:
-	kfree(pcf);
+static const struct i2c_device_id pcf8583_id[] = {
+	{ "pcf8583", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8583_id);
 
-	return err;
-}
+static struct i2c_driver pcf8583_driver = {
+	.driver = {
+		.name	= "pcf8583",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pcf8583_probe,
+	.remove		= __devexit_p(pcf8583_remove),
+	.id_table	= pcf8583_id,
+};
 
 static __init int pcf8583_init(void)
 {
-- 
cgit v1.2.3


From c68d07b2da54c941bb36c9d6d35fe8f263ee10ef Mon Sep 17 00:00:00 2001
From: "Carlos R. Mafra" <crmafra@ift.unesp.br>
Date: Wed, 23 Jul 2008 21:30:40 -0700
Subject: rtc: remove and clarify unneeded externs

When CONFIG_HPET_EMULATE_RTC is defined the external declaration of
hpet_rtc_interrupt is redundant due to the inclusion of hpet.h.

When !CONFIG_HPET_EMULATE_RTC we make it clear that hpet_rtc_interrupt is
not used by defining it to return zero.

Signed-off-by: Carlos R. Mafra <crmafra@ift.unesp.br>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/rtc.c     | 2 --
 drivers/rtc/rtc-cmos.c | 5 ++++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index d1569a0d050..dbefbb30ed4 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -121,8 +121,6 @@ static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 	return 0;
 }
 #endif
-#else
-extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
 #endif
 
 /*
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index d7bb9bac71d..94b89a2d9c2 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -52,7 +52,10 @@
 #define hpet_rtc_timer_init() 			do { } while (0)
 #define hpet_register_irq_handler(h) 		0
 #define hpet_unregister_irq_handler(h)		do { } while (0)
-extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
+static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
+{
+	return 0;
+}
 #endif
 
 struct cmos_rtc {
-- 
cgit v1.2.3


From 35d3fdd5f304c06654c940921fc045c60df34693 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Wed, 23 Jul 2008 21:30:43 -0700
Subject: rtc-cmos: improve HPET IRQ glue

Resolve http://bugzilla.kernel.org/show_bug.cgi?id=11051 and other bugs
related to the way the HPET glue code in rtc-cmos was incomplete and
inconsistent:

 * Switch the approach so that the basic driver code flow isn't
   changed by having HPET ... instead, just have HPET shadow the
   RTC_CONTROL irq enables and RTC_FREQ_SELECT data.  It's only
   coping with IRQ thievery, after all.

 * Do that consistently (!!) to avoid problems when the HPET code
   is out of sync with the real RTC intent.  Examples include:

   - cmos_procfs(), which now reports correct data

   - cmos_irq_set_state() ... also removing the previous PIE_{ON,OFF}
     ioctl support so only one code path manages "periodic" IRQs

   - cmos_do_shutdown() ... currently a "just in case" change.

   - cmos_suspend() and cmos_resume() ... also handling a bug that
     was specific to HPET's IRQ thievery, where the alarm wasn't
     disabled after waking the system

 * Always call that HPET code under the RTC spinlock (it doesn't do
   its own locking)

Also clean up the HPET glue:

 * Add some comments explaining what's going on.

 * Switch to having just one #ifdef for the HPET glue, and inline
   functions (not #defines) to avoid some compiler warnings.

 * Have the probe message also report when HPET IRQs are involved

This still leaves various holes in the HPET glue, like the emulated update
IRQs being out of sync with the RTC, alarms never using day or month
matches, and many extra IRQs (at 64 Hz).

[akpm@linux-foundation.org: fix build]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tomas Janousek <tomi@nomi.cz>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Carlos R. Mafra <crmafra@ift.unesp.br>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-cmos.c | 193 +++++++++++++++++++++++++++++++++----------------
 1 file changed, 131 insertions(+), 62 deletions(-)

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 94b89a2d9c2..e9984650ea9 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -36,28 +36,9 @@
 #include <linux/platform_device.h>
 #include <linux/mod_devicetable.h>
 
-#ifdef CONFIG_HPET_EMULATE_RTC
-#include <asm/hpet.h>
-#endif
-
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <asm-generic/rtc.h>
 
-#ifndef CONFIG_HPET_EMULATE_RTC
-#define is_hpet_enabled()			0
-#define hpet_set_alarm_time(hrs, min, sec) 	do { } while (0)
-#define hpet_set_periodic_freq(arg) 		0
-#define hpet_mask_rtc_irq_bit(arg) 		do { } while (0)
-#define hpet_set_rtc_irq_bit(arg) 		do { } while (0)
-#define hpet_rtc_timer_init() 			do { } while (0)
-#define hpet_register_irq_handler(h) 		0
-#define hpet_unregister_irq_handler(h)		do { } while (0)
-static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
-{
-	return 0;
-}
-#endif
-
 struct cmos_rtc {
 	struct rtc_device	*rtc;
 	struct device		*dev;
@@ -96,6 +77,72 @@ static inline int is_intr(u8 rtc_intr)
 
 /*----------------------------------------------------------------*/
 
+/* Much modern x86 hardware has HPETs (10+ MHz timers) which, because
+ * many BIOS programmers don't set up "sane mode" IRQ routing, are mostly
+ * used in a broken "legacy replacement" mode.  The breakage includes
+ * HPET #1 hijacking the IRQ for this RTC, and being unavailable for
+ * other (better) use.
+ *
+ * When that broken mode is in use, platform glue provides a partial
+ * emulation of hardware RTC IRQ facilities using HPET #1.  We don't
+ * want to use HPET for anything except those IRQs though...
+ */
+#ifdef CONFIG_HPET_EMULATE_RTC
+#include <asm/hpet.h>
+#else
+
+static inline int is_hpet_enabled(void)
+{
+	return 0;
+}
+
+static inline int hpet_mask_rtc_irq_bit(unsigned long mask)
+{
+	return 0;
+}
+
+static inline int hpet_set_rtc_irq_bit(unsigned long mask)
+{
+	return 0;
+}
+
+static inline int
+hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
+{
+	return 0;
+}
+
+static inline int hpet_set_periodic_freq(unsigned long freq)
+{
+	return 0;
+}
+
+static inline int hpet_rtc_dropped_irq(void)
+{
+	return 0;
+}
+
+static inline int hpet_rtc_timer_init(void)
+{
+	return 0;
+}
+
+extern irq_handler_t hpet_rtc_interrupt;
+
+static inline int hpet_register_irq_handler(irq_handler_t handler)
+{
+	return 0;
+}
+
+static inline int hpet_unregister_irq_handler(irq_handler_t handler)
+{
+	return 0;
+}
+
+#endif
+
+/*----------------------------------------------------------------*/
+
 static int cmos_read_time(struct device *dev, struct rtc_time *t)
 {
 	/* REVISIT:  if the clock has a "century" register, use
@@ -216,13 +263,14 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	sec = t->time.tm_sec;
 	sec = (sec < 60) ? BIN2BCD(sec) : 0xff;
 
-	hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec);
 	spin_lock_irq(&rtc_lock);
 
 	/* next rtc irq must not be from previous alarm setting */
 	rtc_control = CMOS_READ(RTC_CONTROL);
 	rtc_control &= ~RTC_AIE;
 	CMOS_WRITE(rtc_control, RTC_CONTROL);
+	hpet_mask_rtc_irq_bit(RTC_AIE);
+
 	rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
 	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
 	if (is_intr(rtc_intr))
@@ -240,9 +288,16 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 			CMOS_WRITE(mon, cmos->mon_alrm);
 	}
 
+	/* FIXME the HPET alarm glue currently ignores day_alrm
+	 * and mon_alrm ...
+	 */
+	hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec);
+
 	if (t->enabled) {
 		rtc_control |= RTC_AIE;
 		CMOS_WRITE(rtc_control, RTC_CONTROL);
+		hpet_set_rtc_irq_bit(RTC_AIE);
+
 		rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
 		rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
 		if (is_intr(rtc_intr))
@@ -270,8 +325,8 @@ static int cmos_irq_set_freq(struct device *dev, int freq)
 	f = 16 - f;
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	if (!hpet_set_periodic_freq(freq))
-		CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT);
+	hpet_set_periodic_freq(freq);
+	CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
@@ -289,11 +344,13 @@ static int cmos_irq_set_state(struct device *dev, int enabled)
 	spin_lock_irqsave(&rtc_lock, flags);
 	rtc_control = CMOS_READ(RTC_CONTROL);
 
-	if (enabled)
+	if (enabled) {
 		rtc_control |= RTC_PIE;
-	else
+		hpet_set_rtc_irq_bit(RTC_PIE);
+	} else {
 		rtc_control &= ~RTC_PIE;
-
+		hpet_mask_rtc_irq_bit(RTC_PIE);
+	}
 	CMOS_WRITE(rtc_control, RTC_CONTROL);
 
 	rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
@@ -319,11 +376,10 @@ cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 	case RTC_AIE_ON:
 	case RTC_UIE_OFF:
 	case RTC_UIE_ON:
-	case RTC_PIE_OFF:
-	case RTC_PIE_ON:
 		if (!is_valid_irq(cmos->irq))
 			return -EINVAL;
 		break;
+	/* PIE ON/OFF is handled by cmos_irq_set_state() */
 	default:
 		return -ENOIOCTLCMD;
 	}
@@ -347,17 +403,8 @@ cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		rtc_control |= RTC_UIE;
 		hpet_set_rtc_irq_bit(RTC_UIE);
 		break;
-	case RTC_PIE_OFF:	/* periodic off */
-		rtc_control &= ~RTC_PIE;
-		hpet_mask_rtc_irq_bit(RTC_PIE);
-		break;
-	case RTC_PIE_ON:	/* periodic on */
-		rtc_control |= RTC_PIE;
-		hpet_set_rtc_irq_bit(RTC_PIE);
-		break;
 	}
-	if (!is_hpet_enabled())
-		CMOS_WRITE(rtc_control, RTC_CONTROL);
+	CMOS_WRITE(rtc_control, RTC_CONTROL);
 
 	rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
 	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
@@ -505,18 +552,19 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
 	u8		rtc_control;
 
 	spin_lock(&rtc_lock);
-	/*
-	 * In this case it is HPET RTC interrupt handler
-	 * calling us, with the interrupt information
-	 * passed as arg1, instead of irq.
+
+	/* When the HPET interrupt handler calls us, the interrupt
+	 * status is passed as arg1 instead of the irq number.  But
+	 * always clear irq status, even when HPET is in the way.
+	 *
+	 * Note that HPET and RTC are almost certainly out of phase,
+	 * giving different IRQ status ...
 	 */
+	irqstat = CMOS_READ(RTC_INTR_FLAGS);
+	rtc_control = CMOS_READ(RTC_CONTROL);
 	if (is_hpet_enabled())
 		irqstat = (unsigned long)irq & 0xF0;
-	else {
-		irqstat = CMOS_READ(RTC_INTR_FLAGS);
-		rtc_control = CMOS_READ(RTC_CONTROL);
-		irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
-	}
+	irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
 
 	/* All Linux RTC alarms should be treated as if they were oneshot.
 	 * Similar code may be needed in system wakeup paths, in case the
@@ -526,6 +574,8 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
 		rtc_control = CMOS_READ(RTC_CONTROL);
 		rtc_control &= ~RTC_AIE;
 		CMOS_WRITE(rtc_control, RTC_CONTROL);
+		hpet_mask_rtc_irq_bit(RTC_AIE);
+
 		CMOS_READ(RTC_INTR_FLAGS);
 	}
 	spin_unlock(&rtc_lock);
@@ -632,8 +682,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 	 * do something about other clock frequencies.
 	 */
 	cmos_rtc.rtc->irq_freq = 1024;
-	if (!hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq))
-		CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
+	hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq);
+	CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
 
 	/* disable irqs.
 	 *
@@ -643,6 +693,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 	rtc_control = CMOS_READ(RTC_CONTROL);
 	rtc_control &= ~(RTC_PIE | RTC_AIE | RTC_UIE);
 	CMOS_WRITE(rtc_control, RTC_CONTROL);
+	hpet_mask_rtc_irq_bit(RTC_PIE | RTC_AIE | RTC_UIE);
+
 	CMOS_READ(RTC_INTR_FLAGS);
 
 	spin_unlock_irq(&rtc_lock);
@@ -690,7 +742,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 		goto cleanup2;
 	}
 
-	pr_info("%s: alarms up to one %s%s\n",
+	pr_info("%s: alarms up to one %s%s%s\n",
 			cmos_rtc.rtc->dev.bus_id,
 			is_valid_irq(rtc_irq)
 				?  (cmos_rtc.mon_alrm
@@ -698,8 +750,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 					: (cmos_rtc.day_alrm
 						? "month" : "day"))
 				: "no",
-			cmos_rtc.century ? ", y3k" : ""
-			);
+			cmos_rtc.century ? ", y3k" : "",
+			is_hpet_enabled() ? ", hpet irqs" : "");
 
 	return 0;
 
@@ -720,8 +772,10 @@ static void cmos_do_shutdown(void)
 
 	spin_lock_irq(&rtc_lock);
 	rtc_control = CMOS_READ(RTC_CONTROL);
-	rtc_control &= ~(RTC_PIE|RTC_AIE|RTC_UIE);
+	rtc_control &= ~RTC_IRQMASK;
 	CMOS_WRITE(rtc_control, RTC_CONTROL);
+	hpet_mask_rtc_irq_bit(RTC_IRQMASK);
+
 	CMOS_READ(RTC_INTR_FLAGS);
 	spin_unlock_irq(&rtc_lock);
 }
@@ -764,12 +818,16 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
 	cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
 	if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
 		unsigned char	irqstat;
+		unsigned char	mask;
 
 		if (do_wake)
-			tmp &= ~(RTC_PIE|RTC_UIE);
+			mask = RTC_IRQMASK & ~RTC_AIE;
 		else
-			tmp &= ~(RTC_PIE|RTC_AIE|RTC_UIE);
+			mask = RTC_IRQMASK;
+		tmp &= ~mask;
 		CMOS_WRITE(tmp, RTC_CONTROL);
+		hpet_mask_rtc_irq_bit(mask);
+
 		irqstat = CMOS_READ(RTC_INTR_FLAGS);
 		irqstat &= (tmp & RTC_IRQMASK) | RTC_IRQF;
 		if (is_intr(irqstat))
@@ -799,7 +857,8 @@ static int cmos_resume(struct device *dev)
 	unsigned char	tmp = cmos->suspend_ctrl;
 
 	/* re-enable any irqs previously active */
-	if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
+	if (tmp & RTC_IRQMASK) {
+		unsigned char	mask;
 
 		if (cmos->enabled_wake) {
 			if (cmos->wake_off)
@@ -810,18 +869,28 @@ static int cmos_resume(struct device *dev)
 		}
 
 		spin_lock_irq(&rtc_lock);
-		CMOS_WRITE(tmp, RTC_CONTROL);
-		tmp = CMOS_READ(RTC_INTR_FLAGS);
-		tmp &= (cmos->suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
-		if (is_intr(tmp))
-			rtc_update_irq(cmos->rtc, 1, tmp);
+		do {
+			CMOS_WRITE(tmp, RTC_CONTROL);
+			hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK);
+
+			mask = CMOS_READ(RTC_INTR_FLAGS);
+			mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
+			if (!is_intr(mask))
+				break;
+
+			/* force one-shot behavior if HPET blocked
+			 * the wake alarm's irq
+			 */
+			rtc_update_irq(cmos->rtc, 1, mask);
+			tmp &= ~RTC_AIE;
+			hpet_mask_rtc_irq_bit(RTC_AIE);
+		} while (mask & RTC_AIE);
 		spin_unlock_irq(&rtc_lock);
 	}
 
 	pr_debug("%s: resume, ctrl %02x\n",
 			cmos_rtc.rtc->dev.bus_id,
-			cmos->suspend_ctrl);
-
+			tmp);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 4cd0c5c40b64ef9fd94fb8382dade2fd28f2b935 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 23 Jul 2008 21:30:44 -0700
Subject: rtc: rtc-s3c: add __devexit and __devinit markers

Add the relevant __devinit and __devexit attributes to the rtc-s3c driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-s3c.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index fed86e507fd..b81ba7020d9 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -430,7 +430,7 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
 	}
 }
 
-static int s3c_rtc_remove(struct platform_device *dev)
+static int __devexit s3c_rtc_remove(struct platform_device *dev)
 {
 	struct rtc_device *rtc = platform_get_drvdata(dev);
 
@@ -447,7 +447,7 @@ static int s3c_rtc_remove(struct platform_device *dev)
 	return 0;
 }
 
-static int s3c_rtc_probe(struct platform_device *pdev)
+static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	struct resource *res;
@@ -560,7 +560,7 @@ static int s3c_rtc_resume(struct platform_device *pdev)
 
 static struct platform_driver s3c2410_rtcdrv = {
 	.probe		= s3c_rtc_probe,
-	.remove		= s3c_rtc_remove,
+	.remove		= __devexit_p(s3c_rtc_remove),
 	.suspend	= s3c_rtc_suspend,
 	.resume		= s3c_rtc_resume,
 	.driver		= {
-- 
cgit v1.2.3


From 773be7ee97c11fbb6b8a912a58b268dbe8a6a3fe Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 23 Jul 2008 21:30:45 -0700
Subject: rtc: rtc-s3c: update IRQ handling

The rtc-s3c.c driver has been using its own ioctl() handling to deal with
alarm and periodic interrupts to handle what should now be done with the
rtc core code.

Change to using the .irq_set_freq and .irq_set_state driver entries and
remove the .ioctl handling.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-s3c.c | 83 ++++++++++-----------------------------------------
 1 file changed, 16 insertions(+), 67 deletions(-)

diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index b81ba7020d9..54b1ebb0150 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -36,10 +36,8 @@ static struct resource *s3c_rtc_mem;
 static void __iomem *s3c_rtc_base;
 static int s3c_rtc_alarmno = NO_IRQ;
 static int s3c_rtc_tickno  = NO_IRQ;
-static int s3c_rtc_freq    = 1;
 
 static DEFINE_SPINLOCK(s3c_rtc_pie_lock);
-static unsigned int tick_count;
 
 /* IRQ Handlers */
 
@@ -55,7 +53,7 @@ static irqreturn_t s3c_rtc_tickirq(int irq, void *id)
 {
 	struct rtc_device *rdev = id;
 
-	rtc_update_irq(rdev, tick_count++, RTC_PF | RTC_IRQF);
+	rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
 	return IRQ_HANDLED;
 }
 
@@ -74,35 +72,37 @@ static void s3c_rtc_setaie(int to)
 	writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
 }
 
-static void s3c_rtc_setpie(int to)
+static int s3c_rtc_setpie(struct device *dev, int enabled)
 {
 	unsigned int tmp;
 
-	pr_debug("%s: pie=%d\n", __func__, to);
+	pr_debug("%s: pie=%d\n", __func__, enabled);
 
 	spin_lock_irq(&s3c_rtc_pie_lock);
 	tmp = readb(s3c_rtc_base + S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE;
 
-	if (to)
+	if (enabled)
 		tmp |= S3C2410_TICNT_ENABLE;
 
 	writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
 	spin_unlock_irq(&s3c_rtc_pie_lock);
+
+	return 0;
 }
 
-static void s3c_rtc_setfreq(int freq)
+static int s3c_rtc_setfreq(struct device *dev, int freq)
 {
 	unsigned int tmp;
 
 	spin_lock_irq(&s3c_rtc_pie_lock);
-	tmp = readb(s3c_rtc_base + S3C2410_TICNT) & S3C2410_TICNT_ENABLE;
-
-	s3c_rtc_freq = freq;
 
+	tmp = readb(s3c_rtc_base + S3C2410_TICNT) & S3C2410_TICNT_ENABLE;
 	tmp |= (128 / freq)-1;
 
 	writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
 	spin_unlock_irq(&s3c_rtc_pie_lock);
+
+	return 0;
 }
 
 /* Time read/write */
@@ -267,12 +267,7 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	writeb(alrm_en, base + S3C2410_RTCALM);
 
-	if (0) {
-		alrm_en = readb(base + S3C2410_RTCALM);
-		alrm_en &= ~S3C2410_RTCALM_ALMEN;
-		writeb(alrm_en, base + S3C2410_RTCALM);
-		disable_irq_wake(s3c_rtc_alarmno);
-	}
+	s3c_rtc_setaie(alrm->enabled);
 
 	if (alrm->enabled)
 		enable_irq_wake(s3c_rtc_alarmno);
@@ -282,59 +277,12 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	return 0;
 }
 
-static int s3c_rtc_ioctl(struct device *dev,
-			 unsigned int cmd, unsigned long arg)
-{
-	unsigned int ret = -ENOIOCTLCMD;
-
-	switch (cmd) {
-	case RTC_AIE_OFF:
-	case RTC_AIE_ON:
-		s3c_rtc_setaie((cmd == RTC_AIE_ON) ? 1 : 0);
-		ret = 0;
-		break;
-
-	case RTC_PIE_OFF:
-	case RTC_PIE_ON:
-		tick_count = 0;
-		s3c_rtc_setpie((cmd == RTC_PIE_ON) ? 1 : 0);
-		ret = 0;
-		break;
-
-	case RTC_IRQP_READ:
-		ret = put_user(s3c_rtc_freq, (unsigned long __user *)arg);
-		break;
-
-	case RTC_IRQP_SET:
-		if (!is_power_of_2(arg)) {
-			ret = -EINVAL;
-			goto exit;
-		}
-
-		pr_debug("s3c2410_rtc: setting frequency %ld\n", arg);
-
-		s3c_rtc_setfreq(arg);
-		ret = 0;
-		break;
-
-	case RTC_UIE_ON:
-	case RTC_UIE_OFF:
-		ret = -EINVAL;
-	}
-
- exit:
-	return ret;
-}
-
 static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	unsigned int ticnt = readb(s3c_rtc_base + S3C2410_TICNT);
 
 	seq_printf(seq, "periodic_IRQ\t: %s\n",
 		     (ticnt & S3C2410_TICNT_ENABLE) ? "yes" : "no" );
-
-	seq_printf(seq, "periodic_freq\t: %d\n", s3c_rtc_freq);
-
 	return 0;
 }
 
@@ -374,7 +322,7 @@ static void s3c_rtc_release(struct device *dev)
 
 	/* do not clear AIE here, it may be needed for wake */
 
-	s3c_rtc_setpie(0);
+	s3c_rtc_setpie(dev, 0);
 	free_irq(s3c_rtc_alarmno, rtc_dev);
 	free_irq(s3c_rtc_tickno, rtc_dev);
 }
@@ -382,11 +330,12 @@ static void s3c_rtc_release(struct device *dev)
 static const struct rtc_class_ops s3c_rtcops = {
 	.open		= s3c_rtc_open,
 	.release	= s3c_rtc_release,
-	.ioctl		= s3c_rtc_ioctl,
 	.read_time	= s3c_rtc_gettime,
 	.set_time	= s3c_rtc_settime,
 	.read_alarm	= s3c_rtc_getalarm,
 	.set_alarm	= s3c_rtc_setalarm,
+	.irq_set_freq	= s3c_rtc_setfreq,
+	.irq_set_state	= s3c_rtc_setpie,
 	.proc	        = s3c_rtc_proc,
 };
 
@@ -437,7 +386,7 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev)
 	platform_set_drvdata(dev, NULL);
 	rtc_device_unregister(rtc);
 
-	s3c_rtc_setpie(0);
+	s3c_rtc_setpie(&dev->dev, 0);
 	s3c_rtc_setaie(0);
 
 	iounmap(s3c_rtc_base);
@@ -504,7 +453,7 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
  	pr_debug("s3c2410_rtc: RTCCON=%02x\n",
 		 readb(s3c_rtc_base + S3C2410_RTCCON));
 
-	s3c_rtc_setfreq(s3c_rtc_freq);
+	s3c_rtc_setfreq(&pdev->dev, 1);
 
 	/* register RTC and exit */
 
-- 
cgit v1.2.3


From 449321b39f6c6ebfa15d6da24f134240bd51db29 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Wed, 23 Jul 2008 21:30:46 -0700
Subject: rtc-at91rm9200: avoid spurious irqs

This fixes kernel http://bugzilla.kernel.org/show_bug.cgi?id=11112 (bogus
RTC update IRQs reported) for rtc-at91rm9200 by scrubbing old IRQ status
before enabling IRQs.

It also removes nonfunctional periodic IRQ support from this driver;
only update IRQs are reported, or provided by the hardware.

I suspect some other RTCs probably have versions of #11112; it's easy to
overlook, since most non-RTC drivers don't care about spurious IRQs:
they're not reported to userspace.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Report-by: W Unruh <unruh@physics.ubc.ca>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-at91rm9200.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 9c3db934cc2..cd32d05db77 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -171,8 +171,10 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 		| BIN2BCD(tm.tm_mday) << 24
 		| AT91_RTC_DATEEN | AT91_RTC_MTHEN);
 
-	if (alrm->enabled)
+	if (alrm->enabled) {
+		at91_sys_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
 		at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM);
+	}
 
 	pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
 		at91_alarm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour,
@@ -191,28 +193,22 @@ static int at91_rtc_ioctl(struct device *dev, unsigned int cmd,
 
 	pr_debug("%s(): cmd=%08x, arg=%08lx.\n", __func__, cmd, arg);
 
+	/* important:  scrub old status before enabling IRQs */
 	switch (cmd) {
 	case RTC_AIE_OFF:	/* alarm off */
 		at91_sys_write(AT91_RTC_IDR, AT91_RTC_ALARM);
 		break;
 	case RTC_AIE_ON:	/* alarm on */
+		at91_sys_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
 		at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM);
 		break;
 	case RTC_UIE_OFF:	/* update off */
-	case RTC_PIE_OFF:	/* periodic off */
 		at91_sys_write(AT91_RTC_IDR, AT91_RTC_SECEV);
 		break;
 	case RTC_UIE_ON:	/* update on */
-	case RTC_PIE_ON:	/* periodic on */
+		at91_sys_write(AT91_RTC_SCCR, AT91_RTC_SECEV);
 		at91_sys_write(AT91_RTC_IER, AT91_RTC_SECEV);
 		break;
-	case RTC_IRQP_READ:	/* read periodic alarm frequency */
-		ret = put_user(AT91_RTC_FREQ, (unsigned long *) arg);
-		break;
-	case RTC_IRQP_SET:	/* set periodic alarm frequency */
-		if (arg != AT91_RTC_FREQ)
-			ret = -EINVAL;
-		break;
 	default:
 		ret = -ENOIOCTLCMD;
 		break;
-- 
cgit v1.2.3


From 7e2a31da854dcf8324012a83a31b40bc11e52589 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Wed, 23 Jul 2008 21:30:47 -0700
Subject: rtc-cmos: avoid spurious irqs

This fixes kernel http://bugzilla.kernel.org/show_bug.cgi?id=11112 (bogus
RTC update IRQs reported) for rtc-cmos, in two ways:

  - When HPET is stealing the IRQs, use the first IRQ to grab
    the seconds counter which will be monitored (instead of
    using whatever was previously in that memory);

  - In sane IRQ handling modes, scrub out old IRQ status before
    enabling IRQs.

That latter is done by tightening up IRQ handling for rtc-cmos everywhere,
also ensuring that when HPET is used it's the only thing triggering IRQ
reports to userspace; net object shrink.

Also fix a bogus HPET message related to its RTC emulation.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Report-by: W Unruh <unruh@physics.ubc.ca>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/hpet.c |  10 ++--
 drivers/rtc/rtc-cmos.c | 140 ++++++++++++++++++++++---------------------------
 2 files changed, 70 insertions(+), 80 deletions(-)

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 0ea6a19bfdf..ad2b15a1334 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -468,7 +468,7 @@ void hpet_disable(void)
 #define RTC_NUM_INTS		1
 
 static unsigned long hpet_rtc_flags;
-static unsigned long hpet_prev_update_sec;
+static int hpet_prev_update_sec;
 static struct rtc_time hpet_alarm_time;
 static unsigned long hpet_pie_count;
 static unsigned long hpet_t1_cmp;
@@ -575,6 +575,9 @@ int hpet_set_rtc_irq_bit(unsigned long bit_mask)
 
 	hpet_rtc_flags |= bit_mask;
 
+	if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE))
+		hpet_prev_update_sec = -1;
+
 	if (!oldbits)
 		hpet_rtc_timer_init();
 
@@ -652,7 +655,7 @@ static void hpet_rtc_timer_reinit(void)
 		if (hpet_rtc_flags & RTC_PIE)
 			hpet_pie_count += lost_ints;
 		if (printk_ratelimit())
-			printk(KERN_WARNING "rtc: lost %d interrupts\n",
+			printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n",
 				lost_ints);
 	}
 }
@@ -670,7 +673,8 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 
 	if (hpet_rtc_flags & RTC_UIE &&
 	    curr_time.tm_sec != hpet_prev_update_sec) {
-		rtc_int_flag = RTC_UF;
+		if (hpet_prev_update_sec >= 0)
+			rtc_int_flag = RTC_UF;
 		hpet_prev_update_sec = curr_time.tm_sec;
 	}
 
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index e9984650ea9..6ea349aba3b 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -235,11 +235,56 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	return 0;
 }
 
+static void cmos_checkintr(struct cmos_rtc *cmos, unsigned char rtc_control)
+{
+	unsigned char	rtc_intr;
+
+	/* NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
+	 * allegedly some older rtcs need that to handle irqs properly
+	 */
+	rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
+
+	if (is_hpet_enabled())
+		return;
+
+	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+	if (is_intr(rtc_intr))
+		rtc_update_irq(cmos->rtc, 1, rtc_intr);
+}
+
+static void cmos_irq_enable(struct cmos_rtc *cmos, unsigned char mask)
+{
+	unsigned char	rtc_control;
+
+	/* flush any pending IRQ status, notably for update irqs,
+	 * before we enable new IRQs
+	 */
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	cmos_checkintr(cmos, rtc_control);
+
+	rtc_control |= mask;
+	CMOS_WRITE(rtc_control, RTC_CONTROL);
+	hpet_set_rtc_irq_bit(mask);
+
+	cmos_checkintr(cmos, rtc_control);
+}
+
+static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
+{
+	unsigned char	rtc_control;
+
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	rtc_control &= ~mask;
+	CMOS_WRITE(rtc_control, RTC_CONTROL);
+	hpet_mask_rtc_irq_bit(mask);
+
+	cmos_checkintr(cmos, rtc_control);
+}
+
 static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
 	unsigned char	mon, mday, hrs, min, sec;
-	unsigned char	rtc_control, rtc_intr;
 
 	if (!is_valid_irq(cmos->irq))
 		return -EIO;
@@ -266,15 +311,7 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	spin_lock_irq(&rtc_lock);
 
 	/* next rtc irq must not be from previous alarm setting */
-	rtc_control = CMOS_READ(RTC_CONTROL);
-	rtc_control &= ~RTC_AIE;
-	CMOS_WRITE(rtc_control, RTC_CONTROL);
-	hpet_mask_rtc_irq_bit(RTC_AIE);
-
-	rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
-	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
-	if (is_intr(rtc_intr))
-		rtc_update_irq(cmos->rtc, 1, rtc_intr);
+	cmos_irq_disable(cmos, RTC_AIE);
 
 	/* update alarm */
 	CMOS_WRITE(hrs, RTC_HOURS_ALARM);
@@ -293,16 +330,8 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	 */
 	hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec);
 
-	if (t->enabled) {
-		rtc_control |= RTC_AIE;
-		CMOS_WRITE(rtc_control, RTC_CONTROL);
-		hpet_set_rtc_irq_bit(RTC_AIE);
-
-		rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
-		rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
-		if (is_intr(rtc_intr))
-			rtc_update_irq(cmos->rtc, 1, rtc_intr);
-	}
+	if (t->enabled)
+		cmos_irq_enable(cmos, RTC_AIE);
 
 	spin_unlock_irq(&rtc_lock);
 
@@ -335,28 +364,17 @@ static int cmos_irq_set_freq(struct device *dev, int freq)
 static int cmos_irq_set_state(struct device *dev, int enabled)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
-	unsigned char	rtc_control, rtc_intr;
 	unsigned long	flags;
 
 	if (!is_valid_irq(cmos->irq))
 		return -ENXIO;
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_control = CMOS_READ(RTC_CONTROL);
-
-	if (enabled) {
-		rtc_control |= RTC_PIE;
-		hpet_set_rtc_irq_bit(RTC_PIE);
-	} else {
-		rtc_control &= ~RTC_PIE;
-		hpet_mask_rtc_irq_bit(RTC_PIE);
-	}
-	CMOS_WRITE(rtc_control, RTC_CONTROL);
 
-	rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
-	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
-	if (is_intr(rtc_intr))
-		rtc_update_irq(cmos->rtc, 1, rtc_intr);
+	if (enabled)
+		cmos_irq_enable(cmos, RTC_PIE);
+	else
+		cmos_irq_disable(cmos, RTC_PIE);
 
 	spin_unlock_irqrestore(&rtc_lock, flags);
 	return 0;
@@ -368,7 +386,6 @@ static int
 cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
-	unsigned char	rtc_control, rtc_intr;
 	unsigned long	flags;
 
 	switch (cmd) {
@@ -385,32 +402,20 @@ cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 	}
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_control = CMOS_READ(RTC_CONTROL);
 	switch (cmd) {
 	case RTC_AIE_OFF:	/* alarm off */
-		rtc_control &= ~RTC_AIE;
-		hpet_mask_rtc_irq_bit(RTC_AIE);
+		cmos_irq_disable(cmos, RTC_AIE);
 		break;
 	case RTC_AIE_ON:	/* alarm on */
-		rtc_control |= RTC_AIE;
-		hpet_set_rtc_irq_bit(RTC_AIE);
+		cmos_irq_enable(cmos, RTC_AIE);
 		break;
 	case RTC_UIE_OFF:	/* update off */
-		rtc_control &= ~RTC_UIE;
-		hpet_mask_rtc_irq_bit(RTC_UIE);
+		cmos_irq_disable(cmos, RTC_UIE);
 		break;
 	case RTC_UIE_ON:	/* update on */
-		rtc_control |= RTC_UIE;
-		hpet_set_rtc_irq_bit(RTC_UIE);
+		cmos_irq_enable(cmos, RTC_UIE);
 		break;
 	}
-	CMOS_WRITE(rtc_control, RTC_CONTROL);
-
-	rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
-	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
-	if (is_intr(rtc_intr))
-		rtc_update_irq(cmos->rtc, 1, rtc_intr);
-
 	spin_unlock_irqrestore(&rtc_lock, flags);
 	return 0;
 }
@@ -571,7 +576,6 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
 	 * alarm woke the system.
 	 */
 	if (irqstat & RTC_AIE) {
-		rtc_control = CMOS_READ(RTC_CONTROL);
 		rtc_control &= ~RTC_AIE;
 		CMOS_WRITE(rtc_control, RTC_CONTROL);
 		hpet_mask_rtc_irq_bit(RTC_AIE);
@@ -685,17 +689,10 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 	hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq);
 	CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
 
-	/* disable irqs.
-	 *
-	 * NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
-	 * allegedly some older rtcs need that to handle irqs properly
-	 */
-	rtc_control = CMOS_READ(RTC_CONTROL);
-	rtc_control &= ~(RTC_PIE | RTC_AIE | RTC_UIE);
-	CMOS_WRITE(rtc_control, RTC_CONTROL);
-	hpet_mask_rtc_irq_bit(RTC_PIE | RTC_AIE | RTC_UIE);
+	/* disable irqs */
+	cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE);
 
-	CMOS_READ(RTC_INTR_FLAGS);
+	rtc_control = CMOS_READ(RTC_CONTROL);
 
 	spin_unlock_irq(&rtc_lock);
 
@@ -768,15 +765,8 @@ cleanup0:
 
 static void cmos_do_shutdown(void)
 {
-	unsigned char	rtc_control;
-
 	spin_lock_irq(&rtc_lock);
-	rtc_control = CMOS_READ(RTC_CONTROL);
-	rtc_control &= ~RTC_IRQMASK;
-	CMOS_WRITE(rtc_control, RTC_CONTROL);
-	hpet_mask_rtc_irq_bit(RTC_IRQMASK);
-
-	CMOS_READ(RTC_INTR_FLAGS);
+	cmos_irq_disable(&cmos_rtc, RTC_IRQMASK);
 	spin_unlock_irq(&rtc_lock);
 }
 
@@ -817,7 +807,6 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
 	spin_lock_irq(&rtc_lock);
 	cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
 	if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
-		unsigned char	irqstat;
 		unsigned char	mask;
 
 		if (do_wake)
@@ -828,10 +817,7 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
 		CMOS_WRITE(tmp, RTC_CONTROL);
 		hpet_mask_rtc_irq_bit(mask);
 
-		irqstat = CMOS_READ(RTC_INTR_FLAGS);
-		irqstat &= (tmp & RTC_IRQMASK) | RTC_IRQF;
-		if (is_intr(irqstat))
-			rtc_update_irq(cmos->rtc, 1, irqstat);
+		cmos_checkintr(cmos, tmp);
 	}
 	spin_unlock_irq(&rtc_lock);
 
@@ -875,7 +861,7 @@ static int cmos_resume(struct device *dev)
 
 			mask = CMOS_READ(RTC_INTR_FLAGS);
 			mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
-			if (!is_intr(mask))
+			if (!is_hpet_enabled() || !is_intr(mask))
 				break;
 
 			/* force one-shot behavior if HPET blocked
-- 
cgit v1.2.3


From 4cad4431fcd872a1b2efc093b0db6df943f5a898 Mon Sep 17 00:00:00 2001
From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Wed, 23 Jul 2008 21:30:48 -0700
Subject: rtc-vr41xx: add irq_set_freq() and irq_set_state()

Implement the ioctls RTC_PIE_ON, RTC_PIE_OFF, RTC_IRQP_SET and
RTC_IRQP_READ in the standard RTC way.

Thanks Dave for noticing it.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-vr41xx.c | 65 +++++++++++++++++++++++++-----------------------
 1 file changed, 34 insertions(+), 31 deletions(-)

diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index be9c70d0b19..884b635f028 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for NEC VR4100 series Real Time Clock unit.
  *
- *  Copyright (C) 2003-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -34,7 +34,7 @@
 
 MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
 MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 
 /* RTC 1 registers */
 #define ETIMELREG		0x00
@@ -82,7 +82,6 @@ static unsigned long epoch = 1970;	/* Jan 1 1970 00:00:00 */
 
 static DEFINE_SPINLOCK(rtc_lock);
 static char rtc_name[] = "RTC";
-static unsigned long periodic_frequency;
 static unsigned long periodic_count;
 static unsigned int alarm_enabled;
 static int aie_irq = -1;
@@ -207,10 +206,37 @@ static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 	return 0;
 }
 
-static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+static int vr41xx_rtc_irq_set_freq(struct device *dev, int freq)
 {
 	unsigned long count;
 
+	count = RTC_FREQUENCY;
+	do_div(count, freq);
+
+	periodic_count = count;
+
+	spin_lock_irq(&rtc_lock);
+
+	rtc1_write(RTCL1LREG, count);
+	rtc1_write(RTCL1HREG, count >> 16);
+
+	spin_unlock_irq(&rtc_lock);
+
+	return 0;
+}
+
+static int vr41xx_rtc_irq_set_state(struct device *dev, int enabled)
+{
+	if (enabled)
+		enable_irq(pie_irq);
+	else
+		disable_irq(pie_irq);
+
+	return 0;
+}
+
+static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
 	switch (cmd) {
 	case RTC_AIE_ON:
 		spin_lock_irq(&rtc_lock);
@@ -230,33 +256,6 @@ static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long
 			alarm_enabled = 0;
 		}
 
-		spin_unlock_irq(&rtc_lock);
-		break;
-	case RTC_PIE_ON:
-		enable_irq(pie_irq);
-		break;
-	case RTC_PIE_OFF:
-		disable_irq(pie_irq);
-		break;
-	case RTC_IRQP_READ:
-		return put_user(periodic_frequency, (unsigned long __user *)arg);
-		break;
-	case RTC_IRQP_SET:
-		if (arg > MAX_PERIODIC_RATE)
-			return -EINVAL;
-
-		periodic_frequency = arg;
-
-		count = RTC_FREQUENCY;
-		do_div(count, arg);
-
-		periodic_count = count;
-
-		spin_lock_irq(&rtc_lock);
-
-		rtc1_write(RTCL1LREG, count);
-		rtc1_write(RTCL1HREG, count >> 16);
-
 		spin_unlock_irq(&rtc_lock);
 		break;
 	case RTC_EPOCH_READ:
@@ -309,6 +308,8 @@ static const struct rtc_class_ops vr41xx_rtc_ops = {
 	.set_time	= vr41xx_rtc_set_time,
 	.read_alarm	= vr41xx_rtc_read_alarm,
 	.set_alarm	= vr41xx_rtc_set_alarm,
+	.irq_set_freq	= vr41xx_rtc_irq_set_freq,
+	.irq_set_state	= vr41xx_rtc_irq_set_state,
 };
 
 static int __devinit rtc_probe(struct platform_device *pdev)
@@ -346,6 +347,8 @@ static int __devinit rtc_probe(struct platform_device *pdev)
 		goto err_iounmap_all;
 	}
 
+	rtc->max_user_freq = MAX_PERIODIC_RATE;
+
 	spin_lock_irq(&rtc_lock);
 
 	rtc1_write(ECMPLREG, 0);
-- 
cgit v1.2.3


From 2ece5f43b041b96fa2a05107a10a6b0ea0c03a3b Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Wed, 23 Jul 2008 21:30:49 -0700
Subject: fbdev: add the carmine FB driver

Basic FB driver for the carmine chip.  The driver registers two FB devices for
the two possible screens.  The DRAM settings can be be switched via Kconfig
(between eval board and custom).

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/Kconfig          |  26 ++
 drivers/video/Makefile         |   1 +
 drivers/video/carminefb.c      | 790 +++++++++++++++++++++++++++++++++++++++++
 drivers/video/carminefb.h      |  64 ++++
 drivers/video/carminefb_regs.h | 159 +++++++++
 5 files changed, 1040 insertions(+)
 create mode 100644 drivers/video/carminefb.c
 create mode 100644 drivers/video/carminefb.h
 create mode 100644 drivers/video/carminefb_regs.h

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9b887ef64ff..7072d2c5a04 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1658,6 +1658,32 @@ config FB_PM3
 	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
 	  and maybe other boards.
 
+config FB_CARMINE
+	tristate "Fujitsu carmine frame buffer support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Fujitsu Carmine chip.
+	  The driver provides two independent frame buffer devices.
+
+choice
+	depends on FB_CARMINE
+	prompt "DRAM timing"
+	default FB_CARMINE_DRAM_EVAL
+
+config FB_CARMINE_DRAM_EVAL
+	bool "Eval board timings"
+	help
+	  Use timings which work on the eval card.
+
+config CARMINE_DRAM_CUSTOM
+	bool "Custom board timings"
+	help
+	  Use custom board timings.
+endchoice
+
 config FB_AU1100
 	bool "Au1100 LCD Driver"
 	depends on (FB = y) && MIPS && SOC_AU1100
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 04bca35403f..7ee85c0d2e5 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -117,6 +117,7 @@ obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
+obj-$(CONFIG_FB_CARMINE)          += carminefb.o
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_UVESA)            += uvesafb.o
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
new file mode 100644
index 00000000000..e15bb447440
--- /dev/null
+++ b/drivers/video/carminefb.c
@@ -0,0 +1,790 @@
+/*
+ * Frame buffer driver for the Carmine GPU.
+ *
+ * The driver configures the GPU as follows
+ * - FB0 is display 0 with unique memory area
+ * - FB1 is display 1 with unique memory area
+ * - both display use 32 bit colors
+ */
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+
+#include "carminefb.h"
+#include "carminefb_regs.h"
+
+#if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN)
+#error  "The endianness of the target host has not been defined."
+#endif
+
+/*
+ * The initial video mode can be supplied via two different ways:
+ * - as a string that is passed to fb_find_mode() (module option fb_mode_str)
+ * - as an integer that picks the video mode from carmine_modedb[] (module
+ *   option fb_mode)
+ *
+ * If nothing is used than the initial video mode will be the
+ * CARMINEFB_DEFAULT_VIDEO_MODE member of the carmine_modedb[].
+ */
+#define CARMINEFB_DEFAULT_VIDEO_MODE	1
+
+static unsigned int fb_mode = CARMINEFB_DEFAULT_VIDEO_MODE;
+module_param(fb_mode, uint, 444);
+MODULE_PARM_DESC(fb_mode, "Initial video mode as integer.");
+
+static char *fb_mode_str;
+module_param(fb_mode_str, charp, 444);
+MODULE_PARM_DESC(fb_mode_str, "Initial video mode in characters.");
+
+/*
+ * Carminefb displays:
+ * 0b000 None
+ * 0b001 Display 0
+ * 0b010 Display 1
+ */
+static int fb_displays = CARMINE_USE_DISPLAY0 | CARMINE_USE_DISPLAY1;
+module_param(fb_displays, int, 444);
+MODULE_PARM_DESC(fb_displays, "Bit mode, which displays are used");
+
+struct carmine_hw {
+	void __iomem *v_regs;
+	void __iomem *screen_mem;
+	struct fb_info *fb[MAX_DISPLAY];
+};
+
+struct carmine_resolution {
+	u32 htp;
+	u32 hsp;
+	u32 hsw;
+	u32 hdp;
+	u32 vtr;
+	u32 vsp;
+	u32 vsw;
+	u32 vdp;
+	u32 disp_mode;
+};
+
+struct carmine_fb {
+	void __iomem *display_reg;
+	void __iomem *screen_base;
+	u32 smem_offset;
+	u32 cur_mode;
+	u32 new_mode;
+	struct carmine_resolution *res;
+	u32 pseudo_palette[16];
+};
+
+static struct fb_fix_screeninfo carminefb_fix __devinitdata = {
+	.id = "Carmine",
+	.type = FB_TYPE_PACKED_PIXELS,
+	.visual = FB_VISUAL_TRUECOLOR,
+	.accel = FB_ACCEL_NONE,
+};
+
+static const struct fb_videomode carmine_modedb[] = {
+	{
+		.name		= "640x480",
+		.xres		= 640,
+		.yres		= 480,
+	}, {
+		.name		= "800x600",
+		.xres		= 800,
+		.yres		= 600,
+	},
+};
+
+static struct carmine_resolution car_modes[] = {
+	{
+		/* 640x480 */
+		.htp = 800,
+		.hsp = 672,
+		.hsw = 96,
+		.hdp = 640,
+		.vtr = 525,
+		.vsp = 490,
+		.vsw = 2,
+		.vdp = 480,
+		.disp_mode = 0x1400,
+	},
+	{
+		/* 800x600 */
+		.htp = 1060,
+		.hsp = 864,
+		.hsw = 72,
+		.hdp = 800,
+		.vtr = 628,
+		.vsp = 601,
+		.vsw = 2,
+		.vdp = 600,
+		.disp_mode = 0x0d00,
+	}
+};
+
+static int carmine_find_mode(const struct fb_var_screeninfo *var)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(car_modes); i++)
+		if (car_modes[i].hdp == var->xres &&
+		    car_modes[i].vdp == var->yres)
+			return i;
+	return -EINVAL;
+}
+
+static void c_set_disp_reg(const struct carmine_fb *par,
+		u32 offset, u32 val)
+{
+	writel(val, par->display_reg + offset);
+}
+
+static u32 c_get_disp_reg(const struct carmine_fb *par,
+		u32 offset)
+{
+	return readl(par->display_reg + offset);
+}
+
+static void c_set_hw_reg(const struct carmine_hw *hw,
+		u32 offset, u32 val)
+{
+	writel(val, hw->v_regs + offset);
+}
+
+static u32 c_get_hw_reg(const struct carmine_hw *hw,
+		u32 offset)
+{
+	return readl(hw->v_regs + offset);
+}
+
+static int carmine_setcolreg(unsigned regno, unsigned red, unsigned green,
+		unsigned blue, unsigned transp, struct fb_info *info)
+{
+	if (regno >= 16)
+		return 1;
+
+	red >>= 8;
+	green >>= 8;
+	blue >>= 8;
+	transp >>= 8;
+
+	((u32 *)info->pseudo_palette)[regno] = be32_to_cpu(transp << 24 |
+		red << 0 | green << 8 | blue << 16);
+	return 0;
+}
+
+static int carmine_check_var(struct fb_var_screeninfo *var,
+		struct fb_info *info)
+{
+	int ret;
+
+	ret = carmine_find_mode(var);
+	if (ret < 0)
+		return ret;
+
+	if (var->grayscale || var->rotate || var->nonstd)
+		return -EINVAL;
+
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+
+	var->bits_per_pixel = 32;
+
+#ifdef __BIG_ENDIAN
+	var->transp.offset = 24;
+	var->red.offset = 0;
+	var->green.offset = 8;
+	var->blue.offset = 16;
+#else
+	var->transp.offset = 24;
+	var->red.offset = 16;
+	var->green.offset = 8;
+	var->blue.offset = 0;
+#endif
+
+	var->red.length = 8;
+	var->green.length = 8;
+	var->blue.length = 8;
+	var->transp.length = 8;
+
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+	return 0;
+}
+
+static void carmine_init_display_param(struct carmine_fb *par)
+{
+	u32 width;
+	u32 height;
+	u32 param;
+	u32 window_size;
+	u32 soffset = par->smem_offset;
+
+	c_set_disp_reg(par, CARMINE_DISP_REG_C_TRANS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_MLMR_TRANS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_CURSOR_MODE,
+			CARMINE_CURSOR0_PRIORITY_MASK |
+			CARMINE_CURSOR1_PRIORITY_MASK |
+			CARMINE_CURSOR_CUTZ_MASK);
+
+	/* Set default cursor position */
+	c_set_disp_reg(par, CARMINE_DISP_REG_CUR1_POS, 0 << 16 | 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_CUR2_POS, 0 << 16 | 0);
+
+	/* Set default display mode */
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0_EXT_MODE, CARMINE_WINDOW_MODE |
+			CARMINE_EXT_CMODE_DIRECT24_RGBA);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L1_EXT_MODE,
+			CARMINE_EXT_CMODE_DIRECT24_RGBA);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2_EXT_MODE, CARMINE_EXTEND_MODE |
+			CARMINE_EXT_CMODE_DIRECT24_RGBA);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3_EXT_MODE, CARMINE_EXTEND_MODE |
+			CARMINE_EXT_CMODE_DIRECT24_RGBA);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4_EXT_MODE, CARMINE_EXTEND_MODE |
+			CARMINE_EXT_CMODE_DIRECT24_RGBA);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5_EXT_MODE, CARMINE_EXTEND_MODE |
+			CARMINE_EXT_CMODE_DIRECT24_RGBA);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6_EXT_MODE, CARMINE_EXTEND_MODE |
+			CARMINE_EXT_CMODE_DIRECT24_RGBA);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7_EXT_MODE, CARMINE_EXTEND_MODE |
+			CARMINE_EXT_CMODE_DIRECT24_RGBA);
+
+	/* Set default frame size to layer mode register */
+	width = par->res->hdp * 4 / CARMINE_DISP_WIDTH_UNIT;
+	width = width << CARMINE_DISP_WIDTH_SHIFT;
+
+	height = par->res->vdp - 1;
+	param = width | height;
+
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0_MODE_W_H, param);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L1_WIDTH, width);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2_MODE_W_H, param);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3_MODE_W_H, param);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4_MODE_W_H, param);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5_MODE_W_H, param);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6_MODE_W_H, param);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7_MODE_W_H, param);
+
+	/* Set default pos and size */
+	window_size = (par->res->vdp - 1) << CARMINE_DISP_WIN_H_SHIFT;
+	window_size |= par->res->hdp;
+
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0_WIN_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0_WIN_SIZE, window_size);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L1_WIN_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L1_WIN_SIZE, window_size);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2_WIN_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2_WIN_SIZE, window_size);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3_WIN_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3_WIN_SIZE, window_size);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4_WIN_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4_WIN_SIZE, window_size);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5_WIN_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5_WIN_SIZE, window_size);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6_WIN_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6_WIN_SIZE, window_size);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7_WIN_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7_WIN_SIZE, window_size);
+
+	/* Set default origin address */
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0_ORG_ADR, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L1_ORG_ADR, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2_ORG_ADR1, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3_ORG_ADR1, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4_ORG_ADR1, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5_ORG_ADR1, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6_ORG_ADR1, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7_ORG_ADR1, soffset);
+
+	/* Set default display address */
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0_DISP_ADR, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2_DISP_ADR1, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3_DISP_ADR1, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4_DISP_ADR1, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5_DISP_ADR1, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6_DISP_ADR0, soffset);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7_DISP_ADR0, soffset);
+
+	/* Set default display position */
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0_DISP_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2_DISP_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3_DISP_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4_DISP_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5_DISP_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6_DISP_POS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7_DISP_POS, 0);
+
+	/* Set default blend mode */
+	c_set_disp_reg(par, CARMINE_DISP_REG_BLEND_MODE_L0, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_BLEND_MODE_L1, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_BLEND_MODE_L2, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_BLEND_MODE_L3, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_BLEND_MODE_L4, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_BLEND_MODE_L5, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_BLEND_MODE_L6, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_BLEND_MODE_L7, 0);
+
+	/* default transparency mode */
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0_TRANS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L1_TRANS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2_TRANS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3_TRANS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4_TRANS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5_TRANS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6_TRANS, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7_TRANS, 0);
+
+	/* Set default read skip parameter */
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0RM, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2RM, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3RM, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4RM, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5RM, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6RM, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7RM, 0);
+
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0PX, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2PX, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3PX, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4PX, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5PX, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6PX, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7PX, 0);
+
+	c_set_disp_reg(par, CARMINE_DISP_REG_L0PY, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L2PY, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L3PY, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L4PY, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L5PY, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L6PY, 0);
+	c_set_disp_reg(par, CARMINE_DISP_REG_L7PY, 0);
+}
+
+static void set_display_parameters(struct carmine_fb *par)
+{
+	u32 mode;
+	u32 hdp, vdp, htp, hsp, hsw, vtr, vsp, vsw;
+
+	/*
+	 * display timing. Parameters are decreased by one because hardware
+	 * spec is 0 to (n - 1)
+	 * */
+	hdp = par->res->hdp - 1;
+	vdp = par->res->vdp - 1;
+	htp = par->res->htp - 1;
+	hsp = par->res->hsp - 1;
+	hsw = par->res->hsw - 1;
+	vtr = par->res->vtr - 1;
+	vsp = par->res->vsp - 1;
+	vsw = par->res->vsw - 1;
+
+	c_set_disp_reg(par, CARMINE_DISP_REG_H_TOTAL,
+			htp << CARMINE_DISP_HTP_SHIFT);
+	c_set_disp_reg(par, CARMINE_DISP_REG_H_PERIOD,
+			(hdp << CARMINE_DISP_HDB_SHIFT)	| hdp);
+	c_set_disp_reg(par, CARMINE_DISP_REG_V_H_W_H_POS,
+			(vsw << CARMINE_DISP_VSW_SHIFT) |
+			(hsw << CARMINE_DISP_HSW_SHIFT) |
+			(hsp));
+	c_set_disp_reg(par, CARMINE_DISP_REG_V_TOTAL,
+			vtr << CARMINE_DISP_VTR_SHIFT);
+	c_set_disp_reg(par, CARMINE_DISP_REG_V_PERIOD_POS,
+			(vdp << CARMINE_DISP_VDP_SHIFT) | vsp);
+
+	/* clock */
+	mode = c_get_disp_reg(par, CARMINE_DISP_REG_DCM1);
+	mode = (mode & ~CARMINE_DISP_DCM_MASK) |
+		(par->res->disp_mode & CARMINE_DISP_DCM_MASK);
+	/* enable video output and layer 0 */
+	mode |= CARMINE_DEN | CARMINE_L0E;
+	c_set_disp_reg(par, CARMINE_DISP_REG_DCM1, mode);
+}
+
+static int carmine_set_par(struct fb_info *info)
+{
+	struct carmine_fb *par = info->par;
+	int ret;
+
+	ret = carmine_find_mode(&info->var);
+	if (ret < 0)
+		return ret;
+
+	par->new_mode = ret;
+	if (par->cur_mode != par->new_mode) {
+
+		par->cur_mode = par->new_mode;
+		par->res = &car_modes[par->new_mode];
+
+		carmine_init_display_param(par);
+		set_display_parameters(par);
+	}
+
+	info->fix.line_length = info->var.xres * info->var.bits_per_pixel / 8;
+	return 0;
+}
+
+static int init_hardware(struct carmine_hw *hw)
+{
+	u32 flags;
+	u32 loops;
+	u32 ret;
+
+	/* Initalize Carmine */
+	/* Sets internal clock */
+	c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE,
+			CARMINE_DFLT_IP_CLOCK_ENABLE);
+
+	/* Video signal output is turned off */
+	c_set_hw_reg(hw, CARMINE_DISP0_REG + CARMINE_DISP_REG_DCM1, 0);
+	c_set_hw_reg(hw, CARMINE_DISP1_REG + CARMINE_DISP_REG_DCM1, 0);
+
+	/* Software reset */
+	c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_SOFTWARE_RESET, 1);
+	c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_SOFTWARE_RESET, 0);
+
+	/* I/O mode settings */
+	flags = CARMINE_DFLT_IP_DCTL_IO_CONT1 << 16 |
+		CARMINE_DFLT_IP_DCTL_IO_CONT0;
+	c_set_hw_reg(hw, CARMINE_DCTL_REG + CARMINE_DCTL_REG_IOCONT1_IOCONT0,
+			flags);
+
+	/* DRAM initial sequence */
+	flags = CARMINE_DFLT_IP_DCTL_MODE << 16 | CARMINE_DFLT_IP_DCTL_ADD;
+	c_set_hw_reg(hw, CARMINE_DCTL_REG + CARMINE_DCTL_REG_MODE_ADD,
+			flags);
+
+	flags = CARMINE_DFLT_IP_DCTL_SET_TIME1 << 16 |
+		CARMINE_DFLT_IP_DCTL_EMODE;
+	c_set_hw_reg(hw, CARMINE_DCTL_REG + CARMINE_DCTL_REG_SETTIME1_EMODE,
+			flags);
+
+	flags = CARMINE_DFLT_IP_DCTL_REFRESH << 16 |
+		CARMINE_DFLT_IP_DCTL_SET_TIME2;
+	c_set_hw_reg(hw, CARMINE_DCTL_REG + CARMINE_DCTL_REG_REFRESH_SETTIME2,
+			flags);
+
+	flags = CARMINE_DFLT_IP_DCTL_RESERVE2 << 16 |
+		CARMINE_DFLT_IP_DCTL_FIFO_DEPTH;
+	c_set_hw_reg(hw, CARMINE_DCTL_REG + CARMINE_DCTL_REG_RSV2_RSV1, flags);
+
+	flags = CARMINE_DFLT_IP_DCTL_DDRIF2 << 16 | CARMINE_DFLT_IP_DCTL_DDRIF1;
+	c_set_hw_reg(hw, CARMINE_DCTL_REG + CARMINE_DCTL_REG_DDRIF2_DDRIF1,
+			flags);
+
+	flags = CARMINE_DFLT_IP_DCTL_RESERVE0 << 16 |
+		CARMINE_DFLT_IP_DCTL_STATES;
+	c_set_hw_reg(hw, CARMINE_DCTL_REG + CARMINE_DCTL_REG_RSV0_STATES,
+			flags);
+
+	/* Executes DLL reset */
+	if (CARMINE_DCTL_DLL_RESET) {
+		for (loops = 0; loops < CARMINE_DCTL_INIT_WAIT_LIMIT; loops++) {
+
+			ret = c_get_hw_reg(hw, CARMINE_DCTL_REG +
+					CARMINE_DCTL_REG_RSV0_STATES);
+			ret &= CARMINE_DCTL_REG_STATES_MASK;
+			if (!ret)
+				break;
+
+			mdelay(CARMINE_DCTL_INIT_WAIT_INTERVAL);
+		}
+
+		if (loops >= CARMINE_DCTL_INIT_WAIT_LIMIT) {
+			printk(KERN_ERR "DRAM init failed\n");
+			return -EIO;
+		}
+	}
+
+	flags = CARMINE_DFLT_IP_DCTL_MODE_AFT_RST << 16 |
+		CARMINE_DFLT_IP_DCTL_ADD;
+	c_set_hw_reg(hw, CARMINE_DCTL_REG + CARMINE_DCTL_REG_MODE_ADD, flags);
+
+	flags = CARMINE_DFLT_IP_DCTL_RESERVE0 << 16 |
+		CARMINE_DFLT_IP_DCTL_STATES_AFT_RST;
+	c_set_hw_reg(hw, CARMINE_DCTL_REG + CARMINE_DCTL_REG_RSV0_STATES,
+			flags);
+
+	/* Initialize the write back register */
+	c_set_hw_reg(hw, CARMINE_WB_REG + CARMINE_WB_REG_WBM,
+			CARMINE_WB_REG_WBM_DEFAULT);
+
+	/* Initialize the Kottos registers */
+	c_set_hw_reg(hw, CARMINE_GRAPH_REG + CARMINE_GRAPH_REG_VRINTM, 0);
+	c_set_hw_reg(hw, CARMINE_GRAPH_REG + CARMINE_GRAPH_REG_VRERRM, 0);
+
+	/* Set DC offsets */
+	c_set_hw_reg(hw, CARMINE_GRAPH_REG + CARMINE_GRAPH_REG_DC_OFFSET_PX, 0);
+	c_set_hw_reg(hw, CARMINE_GRAPH_REG + CARMINE_GRAPH_REG_DC_OFFSET_PY, 0);
+	c_set_hw_reg(hw, CARMINE_GRAPH_REG + CARMINE_GRAPH_REG_DC_OFFSET_LX, 0);
+	c_set_hw_reg(hw, CARMINE_GRAPH_REG + CARMINE_GRAPH_REG_DC_OFFSET_LY, 0);
+	c_set_hw_reg(hw, CARMINE_GRAPH_REG + CARMINE_GRAPH_REG_DC_OFFSET_TX, 0);
+	c_set_hw_reg(hw, CARMINE_GRAPH_REG + CARMINE_GRAPH_REG_DC_OFFSET_TY, 0);
+	return 0;
+}
+
+static struct fb_ops carminefb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+
+	.fb_check_var	= carmine_check_var,
+	.fb_set_par	= carmine_set_par,
+	.fb_setcolreg	= carmine_setcolreg,
+};
+
+static int alloc_carmine_fb(void __iomem *regs, void __iomem *smem_base,
+		int smem_offset, struct device *device, struct fb_info **rinfo)
+{
+	int ret;
+	struct fb_info *info;
+	struct carmine_fb *par;
+
+	info = framebuffer_alloc(sizeof *par, device);
+	if (!info)
+		return -ENOMEM;
+
+	par = info->par;
+	par->display_reg = regs;
+	par->smem_offset = smem_offset;
+
+	info->screen_base = smem_base + smem_offset;
+	info->screen_size = CARMINE_DISPLAY_MEM;
+	info->fbops = &carminefb_ops;
+
+	info->fix = carminefb_fix;
+	info->pseudo_palette = par->pseudo_palette;
+	info->flags = FBINFO_DEFAULT;
+
+	ret = fb_alloc_cmap(&info->cmap, 256, 1);
+	if (ret < 0)
+		goto err_free_fb;
+
+	if (fb_mode > ARRAY_SIZE(carmine_modedb))
+		fb_mode = CARMINEFB_DEFAULT_VIDEO_MODE;
+
+	par->cur_mode = par->new_mode = ~0;
+
+	ret = fb_find_mode(&info->var, info, fb_mode_str, carmine_modedb,
+			ARRAY_SIZE(carmine_modedb),
+			&carmine_modedb[fb_mode], 32);
+	if (!ret || ret == 4) {
+		ret = -EINVAL;
+		goto err_dealloc_cmap;
+	}
+
+	fb_videomode_to_modelist(carmine_modedb, ARRAY_SIZE(carmine_modedb),
+			&info->modelist);
+
+	ret = register_framebuffer(info);
+	if (ret < 0)
+		goto err_dealloc_cmap;
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+			info->fix.id);
+
+	*rinfo = info;
+	return 0;
+
+err_dealloc_cmap:
+	fb_dealloc_cmap(&info->cmap);
+err_free_fb:
+	framebuffer_release(info);
+	return ret;
+}
+
+static void cleanup_fb_device(struct fb_info *info)
+{
+	if (info) {
+		unregister_framebuffer(info);
+		fb_dealloc_cmap(&info->cmap);
+		framebuffer_release(info);
+	}
+}
+
+static int __devinit carminefb_probe(struct pci_dev *dev,
+		const struct pci_device_id *ent)
+{
+	struct carmine_hw *hw;
+	struct device *device = &dev->dev;
+	struct fb_info *info;
+	int ret;
+
+	ret = pci_enable_device(dev);
+	if (ret)
+		return ret;
+
+	ret = -ENOMEM;
+	hw = kzalloc(sizeof *hw, GFP_KERNEL);
+	if (!hw)
+		goto err_enable_pci;
+
+	carminefb_fix.mmio_start = pci_resource_start(dev, CARMINE_CONFIG_BAR);
+	carminefb_fix.mmio_len = pci_resource_len(dev, CARMINE_CONFIG_BAR);
+
+	if (!request_mem_region(carminefb_fix.mmio_start,
+				carminefb_fix.mmio_len,
+				"carminefb regbase")) {
+		printk(KERN_ERR "carminefb: Can't reserve regbase.\n");
+		ret = -EBUSY;
+		goto err_free_hw;
+	}
+	hw->v_regs = ioremap_nocache(carminefb_fix.mmio_start,
+			carminefb_fix.mmio_len);
+	if (!hw->v_regs) {
+		printk(KERN_ERR "carminefb: Can't remap %s register.\n",
+				carminefb_fix.id);
+		goto err_free_reg_mmio;
+	}
+
+	carminefb_fix.smem_start = pci_resource_start(dev, CARMINE_MEMORY_BAR);
+	carminefb_fix.smem_len = pci_resource_len(dev, CARMINE_MEMORY_BAR);
+
+	/* The memory area tends to be very large (256 MiB). Remap only what
+	 * is required for that largest resolution to avoid remaps at run
+	 * time
+	 */
+	if (carminefb_fix.smem_len > CARMINE_TOTAL_DIPLAY_MEM)
+		carminefb_fix.smem_len = CARMINE_TOTAL_DIPLAY_MEM;
+
+	else if (carminefb_fix.smem_len < CARMINE_TOTAL_DIPLAY_MEM) {
+		printk(KERN_ERR "carminefb: Memory bar is only %d bytes, %d "
+				"are required.", carminefb_fix.smem_len,
+				CARMINE_TOTAL_DIPLAY_MEM);
+		goto err_free_reg_mmio;
+	}
+
+	if (!request_mem_region(carminefb_fix.smem_start,
+				carminefb_fix.smem_len,	"carminefb smem")) {
+		printk(KERN_ERR "carminefb: Can't reserve smem.\n");
+		goto err_unmap_vregs;
+	}
+
+	hw->screen_mem = ioremap_nocache(carminefb_fix.smem_start,
+			carminefb_fix.smem_len);
+	if (!hw->screen_mem) {
+		printk(KERN_ERR "carmine: Can't ioremap smem area.\n");
+		release_mem_region(carminefb_fix.smem_start,
+				carminefb_fix.smem_len);
+		goto err_reg_smem;
+	}
+
+	ret = init_hardware(hw);
+	if (ret)
+		goto err_unmap_screen;
+
+	info = NULL;
+	if (fb_displays & CARMINE_USE_DISPLAY0) {
+		ret = alloc_carmine_fb(hw->v_regs + CARMINE_DISP0_REG,
+				hw->screen_mem, CARMINE_DISPLAY_MEM * 0,
+				device, &info);
+		if (ret)
+			goto err_deinit_hw;
+	}
+
+	hw->fb[0] = info;
+
+	info = NULL;
+	if (fb_displays & CARMINE_USE_DISPLAY1) {
+		ret = alloc_carmine_fb(hw->v_regs + CARMINE_DISP1_REG,
+				hw->screen_mem, CARMINE_DISPLAY_MEM * 1,
+				device, &info);
+		if (ret)
+			goto err_cleanup_fb0;
+	}
+
+	hw->fb[1] = info;
+	info = NULL;
+
+	pci_set_drvdata(dev, hw);
+	return 0;
+
+err_cleanup_fb0:
+	cleanup_fb_device(hw->fb[0]);
+err_deinit_hw:
+	/* disable clock, etc */
+	c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE, 0);
+err_unmap_screen:
+	iounmap(hw->screen_mem);
+err_reg_smem:
+	release_mem_region(carminefb_fix.mmio_start, carminefb_fix.mmio_len);
+err_unmap_vregs:
+	iounmap(hw->v_regs);
+err_free_reg_mmio:
+	release_mem_region(carminefb_fix.mmio_start, carminefb_fix.mmio_len);
+err_free_hw:
+	kfree(hw);
+err_enable_pci:
+	pci_disable_device(dev);
+	return ret;
+}
+
+static void __devexit carminefb_remove(struct pci_dev *dev)
+{
+	struct carmine_hw *hw = pci_get_drvdata(dev);
+	struct fb_fix_screeninfo fix;
+	int i;
+
+	/* in case we use only fb1 and not fb1 */
+	if (hw->fb[0])
+		fix = hw->fb[0]->fix;
+	else
+		fix = hw->fb[1]->fix;
+
+	/* deactivate display(s) and switch clocks */
+	c_set_hw_reg(hw, CARMINE_DISP0_REG + CARMINE_DISP_REG_DCM1, 0);
+	c_set_hw_reg(hw, CARMINE_DISP1_REG + CARMINE_DISP_REG_DCM1, 0);
+	c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE, 0);
+
+	for (i = 0; i < MAX_DISPLAY; i++)
+		cleanup_fb_device(hw->fb[i]);
+
+	iounmap(hw->screen_mem);
+	release_mem_region(fix.smem_start, fix.smem_len);
+	iounmap(hw->v_regs);
+	release_mem_region(fix.mmio_start, fix.mmio_len);
+
+	pci_set_drvdata(dev, NULL);
+	pci_disable_device(dev);
+	kfree(hw);
+}
+
+#define PCI_VENDOR_ID_FUJITU_LIMITED 0x10cf
+static struct pci_device_id carmine_devices[] __devinitdata = {
+{
+	PCI_DEVICE(PCI_VENDOR_ID_FUJITU_LIMITED, 0x202b)},
+	{0, 0, 0, 0, 0, 0, 0}
+};
+
+MODULE_DEVICE_TABLE(pci, carmine_devices);
+
+static struct pci_driver carmine_pci_driver = {
+	.name		= "carminefb",
+	.id_table	= carmine_devices,
+	.probe		= carminefb_probe,
+	.remove		= __devexit_p(carminefb_remove),
+};
+
+static int __init carminefb_init(void)
+{
+	if (!(fb_displays &
+		(CARMINE_USE_DISPLAY0 | CARMINE_USE_DISPLAY1))) {
+		printk(KERN_ERR "If you disable both displays than you don't "
+				"need the driver at all\n");
+		return -EINVAL;
+	}
+	return pci_register_driver(&carmine_pci_driver);
+}
+module_init(carminefb_init);
+
+static void __exit carminefb_cleanup(void)
+{
+	pci_unregister_driver(&carmine_pci_driver);
+}
+module_exit(carminefb_cleanup);
+
+MODULE_AUTHOR("Sebastian Siewior <bigeasy@linutronix.de>");
+MODULE_DESCRIPTION("Framebuffer driver for Fujitsu Carmine based devices");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/carminefb.h b/drivers/video/carminefb.h
new file mode 100644
index 00000000000..05306de0c6b
--- /dev/null
+++ b/drivers/video/carminefb.h
@@ -0,0 +1,64 @@
+#ifndef CARMINE_CARMINE_H
+#define CARMINE_CARMINE_H
+
+#define CARMINE_MEMORY_BAR	2
+#define CARMINE_CONFIG_BAR	3
+
+#define MAX_DISPLAY	2
+#define CARMINE_DISPLAY_MEM	(800 * 600 * 4)
+#define CARMINE_TOTAL_DIPLAY_MEM	(CARMINE_DISPLAY_MEM * MAX_DISPLAY)
+
+#define CARMINE_USE_DISPLAY0	(1 << 0)
+#define CARMINE_USE_DISPLAY1	(1 << 1)
+
+/*
+ * This values work on the eval card. Custom boards may use different timings,
+ * here an example :)
+ */
+
+/* DRAM initialization values */
+#ifdef CONFIG_FB_CARMINE_DRAM_EVAL
+
+#define CARMINE_DFLT_IP_CLOCK_ENABLE		(0x03ff)
+#define CARMINE_DFLT_IP_DCTL_ADD		(0x05c3)
+#define CARMINE_DFLT_IP_DCTL_MODE		(0x0121)
+#define CARMINE_DFLT_IP_DCTL_EMODE		(0x8000)
+#define CARMINE_DFLT_IP_DCTL_SET_TIME1		(0x4749)
+#define CARMINE_DFLT_IP_DCTL_SET_TIME2		(0x2a22)
+#define CARMINE_DFLT_IP_DCTL_REFRESH		(0x0042)
+#define CARMINE_DFLT_IP_DCTL_STATES		(0x0003)
+#define CARMINE_DFLT_IP_DCTL_RESERVE0		(0x0020)
+#define CARMINE_DFLT_IP_DCTL_FIFO_DEPTH		(0x000f)
+#define CARMINE_DFLT_IP_DCTL_RESERVE2		(0x0000)
+#define CARMINE_DFLT_IP_DCTL_DDRIF1		(0x6646)
+#define CARMINE_DFLT_IP_DCTL_DDRIF2		(0x0055)
+#define CARMINE_DFLT_IP_DCTL_MODE_AFT_RST	(0x0021)
+#define CARMINE_DFLT_IP_DCTL_STATES_AFT_RST	(0x0002)
+#define CARMINE_DFLT_IP_DCTL_IO_CONT0		(0x0555)
+#define CARMINE_DFLT_IP_DCTL_IO_CONT1		(0x0555)
+#define CARMINE_DCTL_DLL_RESET			(1)
+#endif
+
+#ifdef CONFIG_CARMINE_DRAM_CUSTOM
+
+#define CARMINE_DFLT_IP_CLOCK_ENABLE		(0x03ff)
+#define CARMINE_DFLT_IP_DCTL_ADD		(0x03b2)
+#define CARMINE_DFLT_IP_DCTL_MODE		(0x0161)
+#define CARMINE_DFLT_IP_DCTL_EMODE		(0x8000)
+#define CARMINE_DFLT_IP_DCTL_SET_TIME1		(0x2628)
+#define CARMINE_DFLT_IP_DCTL_SET_TIME2		(0x1a09)
+#define CARMINE_DFLT_IP_DCTL_REFRESH		(0x00fe)
+#define CARMINE_DFLT_IP_DCTL_STATES		(0x0003)
+#define CARMINE_DFLT_IP_DCTL_RESERVE0		(0x0020)
+#define CARMINE_DFLT_IP_DCTL_FIFO_DEPTH		(0x000f)
+#define CARMINE_DFLT_IP_DCTL_RESERVE2		(0x0000)
+#define CARMINE_DFLT_IP_DCTL_DDRIF1		(0x0646)
+#define CARMINE_DFLT_IP_DCTL_DDRIF2		(0x55aa)
+#define CARMINE_DFLT_IP_DCTL_MODE_AFT_RST	(0x0061)
+#define CARMINE_DFLT_IP_DCTL_STATES_AFT_RST	(0x0002)
+#define CARMINE_DFLT_IP_DCTL_IO_CONT0		(0x0555)
+#define CARMINE_DFLT_IP_DCTL_IO_CONT1		(0x0555)
+#define CARMINE_DCTL_DLL_RESET			(1)
+#endif
+
+#endif
diff --git a/drivers/video/carminefb_regs.h b/drivers/video/carminefb_regs.h
new file mode 100644
index 00000000000..045215600b7
--- /dev/null
+++ b/drivers/video/carminefb_regs.h
@@ -0,0 +1,159 @@
+#ifndef _CARMINEFB_REGS_H
+#define _CARMINEFB_REGS_H
+
+#define CARMINE_OVERLAY_EXT_MODE	(0x00000002)
+#define CARMINE_GRAPH_REG		(0x00000000)
+#define CARMINE_DISP0_REG		(0x00100000)
+#define CARMINE_DISP1_REG		(0x00140000)
+#define CARMINE_WB_REG			(0x00180000)
+#define CARMINE_DCTL_REG		(0x00300000)
+#define CARMINE_CTL_REG			(0x00400000)
+#define CARMINE_WINDOW_MODE		(0x00000001)
+#define CARMINE_EXTEND_MODE		(CARMINE_WINDOW_MODE | \
+					CARMINE_OVERLAY_EXT_MODE)
+#define CARMINE_L0E			(1 << 16)
+#define CARMINE_L2E			(1 << 18)
+#define CARMINE_DEN			(1 << 31)
+
+#define CARMINE_EXT_CMODE_DIRECT24_RGBA		(0xC0000000)
+#define CARMINE_DCTL_REG_MODE_ADD		(0x00)
+#define CARMINE_DCTL_REG_SETTIME1_EMODE		(0x04)
+#define CARMINE_DCTL_REG_REFRESH_SETTIME2	(0x08)
+#define CARMINE_DCTL_REG_RSV0_STATES		(0x0C)
+#define CARMINE_DCTL_REG_RSV2_RSV1		(0x10)
+#define CARMINE_DCTL_REG_DDRIF2_DDRIF1		(0x14)
+#define CARMINE_DCTL_REG_IOCONT1_IOCONT0	(0x24)
+#define CARMINE_DCTL_REG_STATES_MASK		(0x000F)
+#define CARMINE_DCTL_INIT_WAIT_INTERVAL		(1)
+#define CARMINE_DCTL_INIT_WAIT_LIMIT		(5000)
+#define CARMINE_WB_REG_WBM_DEFAULT		(0x0001c020)
+#define CARMINE_DISP_REG_L0RM			(0x1880)
+#define CARMINE_DISP_REG_L0PX			(0x1884)
+#define CARMINE_DISP_REG_L0PY			(0x1888)
+#define CARMINE_DISP_REG_L2RM			(0x18A0)
+#define CARMINE_DISP_REG_L2PX			(0x18A4)
+#define CARMINE_DISP_REG_L2PY			(0x18A8)
+#define CARMINE_DISP_REG_L3RM			(0x18B0)
+#define CARMINE_DISP_REG_L3PX			(0x18B4)
+#define CARMINE_DISP_REG_L3PY			(0x18B8)
+#define CARMINE_DISP_REG_L4RM			(0x18C0)
+#define CARMINE_DISP_REG_L4PX			(0x18C4)
+#define CARMINE_DISP_REG_L4PY			(0x18C8)
+#define CARMINE_DISP_REG_L5RM			(0x18D0)
+#define CARMINE_DISP_REG_L5PX			(0x18D4)
+#define CARMINE_DISP_REG_L5PY			(0x18D8)
+#define CARMINE_DISP_REG_L6RM			(0x1924)
+#define CARMINE_DISP_REG_L6PX			(0x1928)
+#define CARMINE_DISP_REG_L6PY			(0x192C)
+#define CARMINE_DISP_REG_L7RM			(0x1964)
+#define CARMINE_DISP_REG_L7PX			(0x1968)
+#define CARMINE_DISP_REG_L7PY			(0x196C)
+#define CARMINE_WB_REG_WBM			(0x0004)
+#define CARMINE_DISP_HTP_SHIFT			(16)
+#define CARMINE_DISP_HDB_SHIFT			(16)
+#define CARMINE_DISP_HSW_SHIFT			(16)
+#define CARMINE_DISP_VSW_SHIFT			(24)
+#define CARMINE_DISP_VTR_SHIFT			(16)
+#define CARMINE_DISP_VDP_SHIFT			(16)
+#define CARMINE_CURSOR_CUTZ_MASK		(0x00000100)
+#define CARMINE_CURSOR0_PRIORITY_MASK		(0x00010000)
+#define CARMINE_CURSOR1_PRIORITY_MASK		(0x00020000)
+#define CARMINE_DISP_WIDTH_SHIFT		(16)
+#define CARMINE_DISP_WIN_H_SHIFT		(16)
+#define CARMINE_DISP_REG_H_TOTAL		(0x0004)
+#define CARMINE_DISP_REG_H_PERIOD		(0x0008)
+#define CARMINE_DISP_REG_V_H_W_H_POS		(0x000C)
+#define CARMINE_DISP_REG_V_TOTAL		(0x0010)
+#define CARMINE_DISP_REG_V_PERIOD_POS		(0x0014)
+#define CARMINE_DISP_REG_L0_MODE_W_H		(0x0020)
+#define CARMINE_DISP_REG_L0_ORG_ADR		(0x0024)
+#define CARMINE_DISP_REG_L0_DISP_ADR		(0x0028)
+#define CARMINE_DISP_REG_L0_DISP_POS		(0x002C)
+#define CARMINE_DISP_REG_L1_WIDTH		(0x0030)
+#define CARMINE_DISP_REG_L1_ORG_ADR		(0x0034)
+#define CARMINE_DISP_REG_L2_MODE_W_H		(0x0040)
+#define CARMINE_DISP_REG_L2_ORG_ADR1		(0x0044)
+#define CARMINE_DISP_REG_L2_DISP_ADR1		(0x0048)
+#define CARMINE_DISP_REG_L2_DISP_POS		(0x0054)
+#define CARMINE_DISP_REG_L3_MODE_W_H		(0x0058)
+#define CARMINE_DISP_REG_L3_ORG_ADR1		(0x005C)
+#define CARMINE_DISP_REG_L3_DISP_ADR1		(0x0060)
+#define CARMINE_DISP_REG_L3_DISP_POS		(0x006C)
+#define CARMINE_DISP_REG_L4_MODE_W_H		(0x0070)
+#define CARMINE_DISP_REG_L4_ORG_ADR1		(0x0074)
+#define CARMINE_DISP_REG_L4_DISP_ADR1		(0x0078)
+#define CARMINE_DISP_REG_L4_DISP_POS		(0x0084)
+#define CARMINE_DISP_REG_L5_MODE_W_H		(0x0088)
+#define CARMINE_DISP_REG_L5_ORG_ADR1		(0x008C)
+#define CARMINE_DISP_REG_L5_DISP_ADR1		(0x0090)
+#define CARMINE_DISP_REG_L5_DISP_POS		(0x009C)
+#define CARMINE_DISP_REG_CURSOR_MODE		(0x00A0)
+#define CARMINE_DISP_REG_CUR1_POS		(0x00A8)
+#define CARMINE_DISP_REG_CUR2_POS		(0x00B0)
+#define CARMINE_DISP_REG_C_TRANS		(0x00BC)
+#define CARMINE_DISP_REG_MLMR_TRANS		(0x00C0)
+#define CARMINE_DISP_REG_L0_EXT_MODE		(0x0110)
+#define CARMINE_DISP_REG_L0_WIN_POS		(0x0114)
+#define CARMINE_DISP_REG_L0_WIN_SIZE		(0x0118)
+#define CARMINE_DISP_REG_L1_EXT_MODE		(0x0120)
+#define CARMINE_DISP_REG_L1_WIN_POS		(0x0124)
+#define CARMINE_DISP_REG_L1_WIN_SIZE		(0x0128)
+#define CARMINE_DISP_REG_L2_EXT_MODE		(0x0130)
+#define CARMINE_DISP_REG_L2_WIN_POS		(0x0134)
+#define CARMINE_DISP_REG_L2_WIN_SIZE		(0x0138)
+#define CARMINE_DISP_REG_L3_EXT_MODE		(0x0140)
+#define CARMINE_DISP_REG_L3_WIN_POS		(0x0144)
+#define CARMINE_DISP_REG_L3_WIN_SIZE		(0x0148)
+#define CARMINE_DISP_REG_L4_EXT_MODE		(0x0150)
+#define CARMINE_DISP_REG_L4_WIN_POS		(0x0154)
+#define CARMINE_DISP_REG_L4_WIN_SIZE		(0x0158)
+#define CARMINE_DISP_REG_L5_EXT_MODE		(0x0160)
+#define CARMINE_DISP_REG_L5_WIN_POS		(0x0164)
+#define CARMINE_DISP_REG_L5_WIN_SIZE		(0x0168)
+#define CARMINE_DISP_REG_L6_EXT_MODE		(0x1918)
+#define CARMINE_DISP_REG_L6_WIN_POS		(0x191c)
+#define CARMINE_DISP_REG_L6_WIN_SIZE		(0x1920)
+#define CARMINE_DISP_REG_L7_EXT_MODE		(0x1958)
+#define CARMINE_DISP_REG_L7_WIN_POS		(0x195c)
+#define CARMINE_DISP_REG_L7_WIN_SIZE		(0x1960)
+#define CARMINE_DISP_REG_BLEND_MODE_L0		(0x00B4)
+#define CARMINE_DISP_REG_BLEND_MODE_L1		(0x0188)
+#define CARMINE_DISP_REG_BLEND_MODE_L2		(0x018C)
+#define CARMINE_DISP_REG_BLEND_MODE_L3		(0x0190)
+#define CARMINE_DISP_REG_BLEND_MODE_L4		(0x0194)
+#define CARMINE_DISP_REG_BLEND_MODE_L5		(0x0198)
+#define CARMINE_DISP_REG_BLEND_MODE_L6		(0x1990)
+#define CARMINE_DISP_REG_BLEND_MODE_L7		(0x1994)
+#define CARMINE_DISP_REG_L0_TRANS		(0x01A0)
+#define CARMINE_DISP_REG_L1_TRANS		(0x01A4)
+#define CARMINE_DISP_REG_L2_TRANS		(0x01A8)
+#define CARMINE_DISP_REG_L3_TRANS		(0x01AC)
+#define CARMINE_DISP_REG_L4_TRANS		(0x01B0)
+#define CARMINE_DISP_REG_L5_TRANS		(0x01B4)
+#define CARMINE_DISP_REG_L6_TRANS		(0x1998)
+#define CARMINE_DISP_REG_L7_TRANS		(0x199c)
+#define CARMINE_EXTEND_MODE_MASK		(0x00000003)
+#define CARMINE_DISP_DCM_MASK			(0x0000FFFF)
+#define CARMINE_DISP_REG_DCM1			(0x0100)
+#define CARMINE_DISP_WIDTH_UNIT			(64)
+#define CARMINE_DISP_REG_L6_MODE_W_H		(0x1900)
+#define CARMINE_DISP_REG_L6_ORG_ADR1		(0x1904)
+#define CARMINE_DISP_REG_L6_DISP_ADR0		(0x1908)
+#define CARMINE_DISP_REG_L6_DISP_POS		(0x1914)
+#define CARMINE_DISP_REG_L7_MODE_W_H		(0x1940)
+#define CARMINE_DISP_REG_L7_ORG_ADR1		(0x1944)
+#define CARMINE_DISP_REG_L7_DISP_ADR0		(0x1948)
+#define CARMINE_DISP_REG_L7_DISP_POS		(0x1954)
+#define CARMINE_CTL_REG_CLOCK_ENABLE		(0x000C)
+#define CARMINE_CTL_REG_SOFTWARE_RESET		(0x0010)
+#define CARMINE_CTL_REG_IST_MASK_ALL		(0x07FFFFFF)
+#define CARMINE_GRAPH_REG_VRINTM		(0x00028064)
+#define CARMINE_GRAPH_REG_VRERRM		(0x0002806C)
+#define CARMINE_GRAPH_REG_DC_OFFSET_PX		(0x0004005C)
+#define CARMINE_GRAPH_REG_DC_OFFSET_PY		(0x00040060)
+#define CARMINE_GRAPH_REG_DC_OFFSET_LX		(0x00040064)
+#define CARMINE_GRAPH_REG_DC_OFFSET_LY		(0x00040068)
+#define CARMINE_GRAPH_REG_DC_OFFSET_TX		(0x0004006C)
+#define CARMINE_GRAPH_REG_DC_OFFSET_TY		(0x00040070)
+
+#endif
-- 
cgit v1.2.3


From 306fa6f60a2870b7a9827a64e1b45cd35a9549aa Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:50 -0700
Subject: tridentfb: replace macros with functions

This patch replaces macros with static functions and puts tridentfb_par
pointer as the first argument of these functions.  These is a step toward
multihead support.

Additionally, bogus TRIDENT_MMIO define is removed as the driver supports
graphics cards only through the mmio mode.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 526 +++++++++++++++++++++++++---------------------
 1 file changed, 283 insertions(+), 243 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index beefab2992c..3e8a1ef892c 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -137,28 +137,34 @@ static int iscyber(int id)
 
 #define CRT 0x3D0		/* CRTC registers offset for color display */
 
-#ifndef TRIDENT_MMIO
-	#define TRIDENT_MMIO 1
-#endif
-
-#if TRIDENT_MMIO
-	#define t_outb(val, reg)	writeb(val,((struct tridentfb_par *)(fb_info.par))->io_virt + reg)
-	#define t_inb(reg)	readb(((struct tridentfb_par*)(fb_info.par))->io_virt + reg)
-#else
-	#define t_outb(val, reg) outb(val, reg)
-	#define t_inb(reg) inb(reg)
-#endif
+static inline void t_outb(struct tridentfb_par *p, u8 val, u16 reg)
+{
+	fb_writeb(val, p->io_virt + reg);
+}
 
+static inline u8 t_inb(struct tridentfb_par *p, u16 reg)
+{
+	return fb_readb(p->io_virt + reg);
+}
 
 static struct accel_switch {
-	void (*init_accel) (int, int);
-	void (*wait_engine) (void);
-	void (*fill_rect) (u32, u32, u32, u32, u32, u32);
-	void (*copy_rect) (u32, u32, u32, u32, u32, u32);
+	void (*init_accel) (struct tridentfb_par *, int, int);
+	void (*wait_engine) (struct tridentfb_par *);
+	void (*fill_rect)
+		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
+	void (*copy_rect)
+		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
 } *acc;
 
-#define writemmr(r, v)	writel(v, ((struct tridentfb_par *)fb_info.par)->io_virt + r)
-#define readmmr(r)	readl(((struct tridentfb_par *)fb_info.par)->io_virt + r)
+static inline void writemmr(struct tridentfb_par *par, u16 r, u32 v)
+{
+	fb_writel(v, par->io_virt + r);
+}
+
+static inline u32 readmmr(struct tridentfb_par *par, u16 r)
+{
+	return fb_readl(par->io_virt + r);
+}
 
 /*
  * Blade specific acceleration.
@@ -176,7 +182,7 @@ static struct accel_switch {
 
 #define ROP_S	0xCC
 
-static void blade_init_accel(int pitch, int bpp)
+static void blade_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 {
 	int v1 = (pitch >> 3) << 20;
 	int tmp = 0, v2;
@@ -196,33 +202,35 @@ static void blade_init_accel(int pitch, int bpp)
 		break;
 	}
 	v2 = v1 | (tmp << 29);
-	writemmr(0x21C0, v2);
-	writemmr(0x21C4, v2);
-	writemmr(0x21B8, v2);
-	writemmr(0x21BC, v2);
-	writemmr(0x21D0, v1);
-	writemmr(0x21D4, v1);
-	writemmr(0x21C8, v1);
-	writemmr(0x21CC, v1);
-	writemmr(0x216C, 0);
+	writemmr(par, 0x21C0, v2);
+	writemmr(par, 0x21C4, v2);
+	writemmr(par, 0x21B8, v2);
+	writemmr(par, 0x21BC, v2);
+	writemmr(par, 0x21D0, v1);
+	writemmr(par, 0x21D4, v1);
+	writemmr(par, 0x21C8, v1);
+	writemmr(par, 0x21CC, v1);
+	writemmr(par, 0x216C, 0);
 }
 
-static void blade_wait_engine(void)
+static void blade_wait_engine(struct tridentfb_par *par)
 {
-	while (readmmr(STA) & 0xFA800000) ;
+	while (readmmr(par, STA) & 0xFA800000) ;
 }
 
-static void blade_fill_rect(u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
+static void blade_fill_rect(struct tridentfb_par *par,
+			    u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
 {
-	writemmr(CLR, c);
-	writemmr(ROP, rop ? 0x66 : ROP_S);
-	writemmr(CMD, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2);
+	writemmr(par, CLR, c);
+	writemmr(par, ROP, rop ? 0x66 : ROP_S);
+	writemmr(par, CMD, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2);
 
-	writemmr(DR1, point(x, y));
-	writemmr(DR2, point(x + w - 1, y + h - 1));
+	writemmr(par, DR1, point(x, y));
+	writemmr(par, DR2, point(x + w - 1, y + h - 1));
 }
 
-static void blade_copy_rect(u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
+static void blade_copy_rect(struct tridentfb_par *par,
+			    u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 {
 	u32 s1, s2, d1, d2;
 	int direction = 2;
@@ -234,13 +242,13 @@ static void blade_copy_rect(u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 	if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
 		direction = 0;
 
-	writemmr(ROP, ROP_S);
-	writemmr(CMD, 0xE0000000 | 1 << 19 | 1 << 4 | 1 << 2 | direction);
+	writemmr(par, ROP, ROP_S);
+	writemmr(par, CMD, 0xE0000000 | 1 << 19 | 1 << 4 | 1 << 2 | direction);
 
-	writemmr(SR1, direction ? s2 : s1);
-	writemmr(SR2, direction ? s1 : s2);
-	writemmr(DR1, direction ? d2 : d1);
-	writemmr(DR2, direction ? d1 : d2);
+	writemmr(par, SR1, direction ? s2 : s1);
+	writemmr(par, SR2, direction ? s1 : s2);
+	writemmr(par, DR1, direction ? d2 : d1);
+	writemmr(par, DR2, direction ? d1 : d2);
 }
 
 static struct accel_switch accel_blade = {
@@ -257,7 +265,7 @@ static struct accel_switch accel_blade = {
 #define ROP_P 0xF0
 #define masked_point(x, y) ((y & 0xffff)<<16|(x & 0xffff))
 
-static void xp_init_accel(int pitch, int bpp)
+static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 {
 	int tmp = 0, v1;
 	unsigned char x = 0;
@@ -293,7 +301,7 @@ static void xp_init_accel(int pitch, int bpp)
 		break;
 	}
 
-	t_outb(x, 0x2125);
+	t_outb(par, x, 0x2125);
 
 	eng_oper = x | 0x40;
 
@@ -313,12 +321,12 @@ static void xp_init_accel(int pitch, int bpp)
 
 	v1 = pitch << tmp;
 
-	writemmr(0x2154, v1);
-	writemmr(0x2150, v1);
-	t_outb(3, 0x2126);
+	writemmr(par, 0x2154, v1);
+	writemmr(par, 0x2150, v1);
+	t_outb(par, 3, 0x2126);
 }
 
-static void xp_wait_engine(void)
+static void xp_wait_engine(struct tridentfb_par *par)
 {
 	int busy;
 	int count, timeout;
@@ -326,7 +334,7 @@ static void xp_wait_engine(void)
 	count = 0;
 	timeout = 0;
 	for (;;) {
-		busy = t_inb(STA) & 0x80;
+		busy = t_inb(par, STA) & 0x80;
 		if (busy != 0x80)
 			return;
 		count++;
@@ -336,25 +344,27 @@ static void xp_wait_engine(void)
 			timeout++;
 			if (timeout == 8) {
 				/* Reset engine */
-				t_outb(0x00, 0x2120);
+				t_outb(par, 0x00, 0x2120);
 				return;
 			}
 		}
 	}
 }
 
-static void xp_fill_rect(u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
+static void xp_fill_rect(struct tridentfb_par *par,
+			 u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
 {
-	writemmr(0x2127, ROP_P);
-	writemmr(0x2158, c);
-	writemmr(0x2128, 0x4000);
-	writemmr(0x2140, masked_point(h, w));
-	writemmr(0x2138, masked_point(y, x));
-	t_outb(0x01, 0x2124);
-	t_outb(eng_oper, 0x2125);
+	writemmr(par, 0x2127, ROP_P);
+	writemmr(par, 0x2158, c);
+	writemmr(par, 0x2128, 0x4000);
+	writemmr(par, 0x2140, masked_point(h, w));
+	writemmr(par, 0x2138, masked_point(y, x));
+	t_outb(par, 0x01, 0x2124);
+	t_outb(par, eng_oper, 0x2125);
 }
 
-static void xp_copy_rect(u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
+static void xp_copy_rect(struct tridentfb_par *par,
+			 u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 {
 	int direction;
 	u32 x1_tmp, x2_tmp, y1_tmp, y2_tmp;
@@ -379,12 +389,12 @@ static void xp_copy_rect(u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 		y2_tmp = y2;
 	}
 
-	writemmr(0x2128, direction);
-	t_outb(ROP_S, 0x2127);
-	writemmr(0x213C, masked_point(y1_tmp, x1_tmp));
-	writemmr(0x2138, masked_point(y2_tmp, x2_tmp));
-	writemmr(0x2140, masked_point(h, w));
-	t_outb(0x01, 0x2124);
+	writemmr(par, 0x2128, direction);
+	t_outb(par, ROP_S, 0x2127);
+	writemmr(par, 0x213C, masked_point(y1_tmp, x1_tmp));
+	writemmr(par, 0x2138, masked_point(y2_tmp, x2_tmp));
+	writemmr(par, 0x2140, masked_point(h, w));
+	t_outb(par, 0x01, 0x2124);
 }
 
 static struct accel_switch accel_xp = {
@@ -397,7 +407,7 @@ static struct accel_switch accel_xp = {
 /*
  * Image specific acceleration functions
  */
-static void image_init_accel(int pitch, int bpp)
+static void image_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 {
 	int tmp = 0;
 	switch (bpp) {
@@ -415,40 +425,42 @@ static void image_init_accel(int pitch, int bpp)
 		tmp = 2;
 		break;
 	}
-	writemmr(0x2120, 0xF0000000);
-	writemmr(0x2120, 0x40000000 | tmp);
-	writemmr(0x2120, 0x80000000);
-	writemmr(0x2144, 0x00000000);
-	writemmr(0x2148, 0x00000000);
-	writemmr(0x2150, 0x00000000);
-	writemmr(0x2154, 0x00000000);
-	writemmr(0x2120, 0x60000000 | (pitch << 16) | pitch);
-	writemmr(0x216C, 0x00000000);
-	writemmr(0x2170, 0x00000000);
-	writemmr(0x217C, 0x00000000);
-	writemmr(0x2120, 0x10000000);
-	writemmr(0x2130, (2047 << 16) | 2047);
+	writemmr(par, 0x2120, 0xF0000000);
+	writemmr(par, 0x2120, 0x40000000 | tmp);
+	writemmr(par, 0x2120, 0x80000000);
+	writemmr(par, 0x2144, 0x00000000);
+	writemmr(par, 0x2148, 0x00000000);
+	writemmr(par, 0x2150, 0x00000000);
+	writemmr(par, 0x2154, 0x00000000);
+	writemmr(par, 0x2120, 0x60000000 | (pitch << 16) | pitch);
+	writemmr(par, 0x216C, 0x00000000);
+	writemmr(par, 0x2170, 0x00000000);
+	writemmr(par, 0x217C, 0x00000000);
+	writemmr(par, 0x2120, 0x10000000);
+	writemmr(par, 0x2130, (2047 << 16) | 2047);
 }
 
-static void image_wait_engine(void)
+static void image_wait_engine(struct tridentfb_par *par)
 {
-	while (readmmr(0x2164) & 0xF0000000) ;
+	while (readmmr(par, 0x2164) & 0xF0000000) ;
 }
 
-static void image_fill_rect(u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
+static void image_fill_rect(struct tridentfb_par *par,
+			    u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
 {
-	writemmr(0x2120, 0x80000000);
-	writemmr(0x2120, 0x90000000 | ROP_S);
+	writemmr(par, 0x2120, 0x80000000);
+	writemmr(par, 0x2120, 0x90000000 | ROP_S);
 
-	writemmr(0x2144, c);
+	writemmr(par, 0x2144, c);
 
-	writemmr(DR1, point(x, y));
-	writemmr(DR2, point(x + w - 1, y + h - 1));
+	writemmr(par, DR1, point(x, y));
+	writemmr(par, DR2, point(x + w - 1, y + h - 1));
 
-	writemmr(0x2124, 0x80000000 | 3 << 22 | 1 << 10 | 1 << 9);
+	writemmr(par, 0x2124, 0x80000000 | 3 << 22 | 1 << 10 | 1 << 9);
 }
 
-static void image_copy_rect(u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
+static void image_copy_rect(struct tridentfb_par *par,
+			    u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 {
 	u32 s1, s2, d1, d2;
 	int direction = 2;
@@ -460,14 +472,15 @@ static void image_copy_rect(u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 	if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
 		direction = 0;
 
-	writemmr(0x2120, 0x80000000);
-	writemmr(0x2120, 0x90000000 | ROP_S);
+	writemmr(par, 0x2120, 0x80000000);
+	writemmr(par, 0x2120, 0x90000000 | ROP_S);
 
-	writemmr(SR1, direction ? s2 : s1);
-	writemmr(SR2, direction ? s1 : s2);
-	writemmr(DR1, direction ? d2 : d1);
-	writemmr(DR2, direction ? d1 : d2);
-	writemmr(0x2124, 0x80000000 | 1 << 22 | 1 << 10 | 1 << 7 | direction);
+	writemmr(par, SR1, direction ? s2 : s1);
+	writemmr(par, SR2, direction ? s1 : s2);
+	writemmr(par, DR1, direction ? d2 : d1);
+	writemmr(par, DR2, direction ? d1 : d2);
+	writemmr(par, 0x2124,
+		 0x80000000 | 1 << 22 | 1 << 10 | 1 << 7 | direction);
 }
 
 static struct accel_switch accel_image = {
@@ -484,6 +497,7 @@ static struct accel_switch accel_image = {
 static void tridentfb_fillrect(struct fb_info *info,
 			       const struct fb_fillrect *fr)
 {
+	struct tridentfb_par *par = info->par;
 	int bpp = info->var.bits_per_pixel;
 	int col = 0;
 
@@ -502,14 +516,18 @@ static void tridentfb_fillrect(struct fb_info *info,
 		break;
 	}
 
-	acc->fill_rect(fr->dx, fr->dy, fr->width, fr->height, col, fr->rop);
-	acc->wait_engine();
+	acc->fill_rect(par, fr->dx, fr->dy, fr->width,
+		       fr->height, col, fr->rop);
+	acc->wait_engine(par);
 }
 static void tridentfb_copyarea(struct fb_info *info,
 			       const struct fb_copyarea *ca)
 {
-	acc->copy_rect(ca->sx, ca->sy, ca->dx, ca->dy, ca->width, ca->height);
-	acc->wait_engine();
+	struct tridentfb_par *par = info->par;
+
+	acc->copy_rect(par, ca->sx, ca->sy, ca->dx, ca->dy,
+		       ca->width, ca->height);
+	acc->wait_engine(par);
 }
 #else /* !CONFIG_FB_TRIDENT_ACCEL */
 #define tridentfb_fillrect cfb_fillrect
@@ -521,49 +539,51 @@ static void tridentfb_copyarea(struct fb_info *info,
  * Hardware access functions
  */
 
-static inline unsigned char read3X4(int reg)
+static inline unsigned char read3X4(struct tridentfb_par *par, int reg)
 {
-	struct tridentfb_par *par = (struct tridentfb_par *)fb_info.par;
 	writeb(reg, par->io_virt + CRT + 4);
 	return readb(par->io_virt + CRT + 5);
 }
 
-static inline void write3X4(int reg, unsigned char val)
+static inline void write3X4(struct tridentfb_par *par, int reg,
+			    unsigned char val)
 {
-	struct tridentfb_par *par = (struct tridentfb_par *)fb_info.par;
 	writeb(reg, par->io_virt + CRT + 4);
 	writeb(val, par->io_virt + CRT + 5);
 }
 
-static inline unsigned char read3C4(int reg)
+static inline unsigned char read3C4(struct tridentfb_par *par, int reg)
 {
-	t_outb(reg, 0x3C4);
-	return t_inb(0x3C5);
+	t_outb(par, reg, 0x3C4);
+	return t_inb(par, 0x3C5);
 }
 
-static inline void write3C4(int reg, unsigned char val)
+static inline void write3C4(struct tridentfb_par *par, int reg,
+			    unsigned char val)
 {
-	t_outb(reg, 0x3C4);
-	t_outb(val, 0x3C5);
+	t_outb(par, reg, 0x3C4);
+	t_outb(par, val, 0x3C5);
 }
 
-static inline unsigned char read3CE(int reg)
+static inline unsigned char read3CE(struct tridentfb_par *par, int reg)
 {
-	t_outb(reg, 0x3CE);
-	return t_inb(0x3CF);
+	t_outb(par, reg, 0x3CE);
+	return t_inb(par, 0x3CF);
 }
 
-static inline void writeAttr(int reg, unsigned char val)
+static inline void writeAttr(struct tridentfb_par *par, int reg,
+			     unsigned char val)
 {
-	readb(((struct tridentfb_par *)fb_info.par)->io_virt + CRT + 0x0A);	/* flip-flop to index */
-	t_outb(reg, 0x3C0);
-	t_outb(val, 0x3C0);
+	fb_readb(par->io_virt + CRT + 0x0A);	/* flip-flop to index */
+	t_outb(par, reg, 0x3C0);
+	t_outb(par, val, 0x3C0);
 }
 
-static inline void write3CE(int reg, unsigned char val)
+static inline void write3CE(struct tridentfb_par *par, int reg,
+			    unsigned char val)
 {
-	t_outb(reg, 0x3CE);
-	t_outb(val, 0x3CF);
+	t_outb(par, reg, 0x3CE);
+	t_outb(par, val, 0x3CF);
 }
 
 static void enable_mmio(void)
@@ -581,32 +601,35 @@ static void enable_mmio(void)
 	outb(inb(0x3D5) | 0x01, 0x3D5);
 }
 
-static void disable_mmio(void)
+static void disable_mmio(struct tridentfb_par *par)
 {
 	/* Goto New Mode */
-	t_outb(0x0B, 0x3C4);
-	t_inb(0x3C5);
+	t_outb(par, 0x0B, 0x3C4);
+	t_inb(par, 0x3C5);
 
 	/* Unprotect registers */
-	t_outb(NewMode1, 0x3C4);
-	t_outb(0x80, 0x3C5);
+	t_outb(par, NewMode1, 0x3C4);
+	t_outb(par, 0x80, 0x3C5);
 
 	/* Disable MMIO */
-	t_outb(PCIReg, 0x3D4);
-	t_outb(t_inb(0x3D5) & ~0x01, 0x3D5);
+	t_outb(par, PCIReg, 0x3D4);
+	t_outb(par, t_inb(par, 0x3D5) & ~0x01, 0x3D5);
 }
 
-#define crtc_unlock()	write3X4(CRTVSyncEnd, read3X4(CRTVSyncEnd) & 0x7F)
+static void crtc_unlock(struct tridentfb_par *par)
+{
+	write3X4(par, CRTVSyncEnd, read3X4(par, CRTVSyncEnd) & 0x7F);
+}
 
 /*  Return flat panel's maximum x resolution */
-static int __devinit get_nativex(void)
+static int __devinit get_nativex(struct tridentfb_par *par)
 {
 	int x, y, tmp;
 
 	if (nativex)
 		return nativex;
 
-	tmp = (read3CE(VertStretch) >> 4) & 3;
+	tmp = (read3CE(par, VertStretch) >> 4) & 3;
 
 	switch (tmp) {
 	case 0:
@@ -632,44 +655,45 @@ static int __devinit get_nativex(void)
 }
 
 /* Set pitch */
-static void set_lwidth(int width)
+static void set_lwidth(struct tridentfb_par *par, int width)
 {
-	write3X4(Offset, width & 0xFF);
-	write3X4(AddColReg,
-		 (read3X4(AddColReg) & 0xCF) | ((width & 0x300) >> 4));
+	write3X4(par, Offset, width & 0xFF);
+	write3X4(par, AddColReg,
+		 (read3X4(par, AddColReg) & 0xCF) | ((width & 0x300) >> 4));
 }
 
 /* For resolutions smaller than FP resolution stretch */
-static void screen_stretch(void)
+static void screen_stretch(struct tridentfb_par *par)
 {
 	if (chip_id != CYBERBLADEXPAi1)
-		write3CE(BiosReg, 0);
+		write3CE(par, BiosReg, 0);
 	else
-		write3CE(BiosReg, 8);
-	write3CE(VertStretch, (read3CE(VertStretch) & 0x7C) | 1);
-	write3CE(HorStretch, (read3CE(HorStretch) & 0x7C) | 1);
+		write3CE(par, BiosReg, 8);
+	write3CE(par, VertStretch, (read3CE(par, VertStretch) & 0x7C) | 1);
+	write3CE(par, HorStretch, (read3CE(par, HorStretch) & 0x7C) | 1);
 }
 
 /* For resolutions smaller than FP resolution center */
-static void screen_center(void)
+static void screen_center(struct tridentfb_par *par)
 {
-	write3CE(VertStretch, (read3CE(VertStretch) & 0x7C) | 0x80);
-	write3CE(HorStretch, (read3CE(HorStretch) & 0x7C) | 0x80);
+	write3CE(par, VertStretch, (read3CE(par, VertStretch) & 0x7C) | 0x80);
+	write3CE(par, HorStretch, (read3CE(par, HorStretch) & 0x7C) | 0x80);
 }
 
 /* Address of first shown pixel in display memory */
-static void set_screen_start(int base)
+static void set_screen_start(struct tridentfb_par *par, int base)
 {
-	write3X4(StartAddrLow, base & 0xFF);
-	write3X4(StartAddrHigh, (base & 0xFF00) >> 8);
-	write3X4(CRTCModuleTest,
-		 (read3X4(CRTCModuleTest) & 0xDF) | ((base & 0x10000) >> 11));
-	write3X4(CRTHiOrd,
-		 (read3X4(CRTHiOrd) & 0xF8) | ((base & 0xE0000) >> 17));
+	u8 tmp;
+	write3X4(par, StartAddrLow, base & 0xFF);
+	write3X4(par, StartAddrHigh, (base & 0xFF00) >> 8);
+	tmp = read3X4(par, CRTCModuleTest) & 0xDF;
+	write3X4(par, CRTCModuleTest, tmp | ((base & 0x10000) >> 11));
+	tmp = read3X4(par, CRTHiOrd) & 0xF8;
+	write3X4(par, CRTHiOrd, tmp | ((base & 0xE0000) >> 17));
 }
 
 /* Set dotclock frequency */
-static void set_vclk(unsigned long freq)
+static void set_vclk(struct tridentfb_par *par, unsigned long freq)
 {
 	int m, n, k;
 	unsigned long f, fi, d, di;
@@ -690,8 +714,8 @@ static void set_vclk(unsigned long freq)
 					break;
 			}
 	if (chip3D) {
-		write3C4(ClockHigh, hi);
-		write3C4(ClockLow, lo);
+		write3C4(par, ClockHigh, hi);
+		write3C4(par, ClockLow, lo);
 	} else {
 		outb(lo, 0x43C8);
 		outb(hi, 0x43C9);
@@ -700,9 +724,9 @@ static void set_vclk(unsigned long freq)
 }
 
 /* Set number of lines for flat panels*/
-static void set_number_of_lines(int lines)
+static void set_number_of_lines(struct tridentfb_par *par, int lines)
 {
-	int tmp = read3CE(CyberEnhance) & 0x8F;
+	int tmp = read3CE(par, CyberEnhance) & 0x8F;
 	if (lines > 1024)
 		tmp |= 0x50;
 	else if (lines > 768)
@@ -711,24 +735,24 @@ static void set_number_of_lines(int lines)
 		tmp |= 0x20;
 	else if (lines > 480)
 		tmp |= 0x10;
-	write3CE(CyberEnhance, tmp);
+	write3CE(par, CyberEnhance, tmp);
 }
 
 /*
  * If we see that FP is active we assume we have one.
  * Otherwise we have a CRT display.User can override.
  */
-static unsigned int __devinit get_displaytype(void)
+static unsigned int __devinit get_displaytype(struct tridentfb_par *par)
 {
 	if (fp)
 		return DISPLAY_FP;
 	if (crt || !chipcyber)
 		return DISPLAY_CRT;
-	return (read3CE(FPConfig) & 0x10) ? DISPLAY_FP : DISPLAY_CRT;
+	return (read3CE(par, FPConfig) & 0x10) ? DISPLAY_FP : DISPLAY_CRT;
 }
 
 /* Try detecting the video memory size */
-static unsigned int __devinit get_memsize(void)
+static unsigned int __devinit get_memsize(struct tridentfb_par *par)
 {
 	unsigned char tmp, tmp2;
 	unsigned int k;
@@ -742,7 +766,7 @@ static unsigned int __devinit get_memsize(void)
 			k = 2560 * Kb;
 			break;
 		default:
-			tmp = read3X4(SPR) & 0x0F;
+			tmp = read3X4(par, SPR) & 0x0F;
 			switch (tmp) {
 
 			case 0x01:
@@ -774,7 +798,7 @@ static unsigned int __devinit get_memsize(void)
 				break;
 			case 0x0E:		/* XP */
 
-				tmp2 = read3C4(0xC1);
+				tmp2 = read3C4(par, 0xC1);
 				switch (tmp2) {
 				case 0x00:
 					k = 20 * Mb;
@@ -862,6 +886,7 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 static int tridentfb_pan_display(struct fb_var_screeninfo *var,
 				 struct fb_info *info)
 {
+	struct tridentfb_par *par = info->par;
 	unsigned int offset;
 
 	debug("enter\n");
@@ -869,13 +894,20 @@ static int tridentfb_pan_display(struct fb_var_screeninfo *var,
 		* var->bits_per_pixel / 32;
 	info->var.xoffset = var->xoffset;
 	info->var.yoffset = var->yoffset;
-	set_screen_start(offset);
+	set_screen_start(par, offset);
 	debug("exit\n");
 	return 0;
 }
 
-#define shadowmode_on()  write3CE(CyberControl, read3CE(CyberControl) | 0x81)
-#define shadowmode_off() write3CE(CyberControl, read3CE(CyberControl) & 0x7E)
+static void shadowmode_on(struct tridentfb_par *par)
+{
+	write3CE(par, CyberControl, read3CE(par, CyberControl) | 0x81);
+}
+
+static void shadowmode_off(struct tridentfb_par *par)
+{
+	write3CE(par, CyberControl, read3CE(par, CyberControl) & 0x7E);
+}
 
 /* Set the hardware to the requested video mode */
 static int tridentfb_set_par(struct fb_info *info)
@@ -905,8 +937,8 @@ static int tridentfb_set_par(struct fb_info *info)
 	vblankstart = var->yres;
 	vblankend = vtotal + 2;
 
-	crtc_unlock();
-	write3CE(CyberControl, 8);
+	crtc_unlock(par);
+	write3CE(par, CyberControl, 8);
 
 	if (flatpanel && var->xres < nativex) {
 		/*
@@ -914,35 +946,36 @@ static int tridentfb_set_par(struct fb_info *info)
 		 * than requested resolution decide whether
 		 * we stretch or center
 		 */
-		t_outb(0xEB, 0x3C2);
+		t_outb(par, 0xEB, 0x3C2);
 
-		shadowmode_on();
+		shadowmode_on(par);
 
 		if (center)
-			screen_center();
+			screen_center(par);
 		else if (stretch)
-			screen_stretch();
+			screen_stretch(par);
 
 	} else {
-		t_outb(0x2B, 0x3C2);
-		write3CE(CyberControl, 8);
+		t_outb(par, 0x2B, 0x3C2);
+		write3CE(par, CyberControl, 8);
 	}
 
 	/* vertical timing values */
-	write3X4(CRTVTotal, vtotal & 0xFF);
-	write3X4(CRTVDispEnd, vdispend & 0xFF);
-	write3X4(CRTVSyncStart, vsyncstart & 0xFF);
-	write3X4(CRTVSyncEnd, (vsyncend & 0x0F));
-	write3X4(CRTVBlankStart, vblankstart & 0xFF);
-	write3X4(CRTVBlankEnd, 0 /* p->vblankend & 0xFF */ );
+	write3X4(par, CRTVTotal, vtotal & 0xFF);
+	write3X4(par, CRTVDispEnd, vdispend & 0xFF);
+	write3X4(par, CRTVSyncStart, vsyncstart & 0xFF);
+	write3X4(par, CRTVSyncEnd, (vsyncend & 0x0F));
+	write3X4(par, CRTVBlankStart, vblankstart & 0xFF);
+	write3X4(par, CRTVBlankEnd, 0 /* p->vblankend & 0xFF */);
 
 	/* horizontal timing values */
-	write3X4(CRTHTotal, htotal & 0xFF);
-	write3X4(CRTHDispEnd, hdispend & 0xFF);
-	write3X4(CRTHSyncStart, hsyncstart & 0xFF);
-	write3X4(CRTHSyncEnd, (hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
-	write3X4(CRTHBlankStart, hblankstart & 0xFF);
-	write3X4(CRTHBlankEnd, 0 /* (p->hblankend & 0x1F) */ );
+	write3X4(par, CRTHTotal, htotal & 0xFF);
+	write3X4(par, CRTHDispEnd, hdispend & 0xFF);
+	write3X4(par, CRTHSyncStart, hsyncstart & 0xFF);
+	write3X4(par, CRTHSyncEnd,
+		 (hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
+	write3X4(par, CRTHBlankStart, hblankstart & 0xFF);
+	write3X4(par, CRTHBlankEnd, 0 /* (p->hblankend & 0x1F) */);
 
 	/* higher bits of vertical timing values */
 	tmp = 0x10;
@@ -954,38 +987,40 @@ static int tridentfb_set_par(struct fb_info *info)
 	if (vtotal & 0x200) tmp |= 0x20;
 	if (vdispend & 0x200) tmp |= 0x40;
 	if (vsyncstart & 0x200) tmp |= 0x80;
-	write3X4(CRTOverflow, tmp);
+	write3X4(par, CRTOverflow, tmp);
 
-	tmp = read3X4(CRTHiOrd) | 0x08;	/* line compare bit 10 */
+	tmp = read3X4(par, CRTHiOrd) | 0x08;	/* line compare bit 10 */
 	if (vtotal & 0x400) tmp |= 0x80;
 	if (vblankstart & 0x400) tmp |= 0x40;
 	if (vsyncstart & 0x400) tmp |= 0x20;
 	if (vdispend & 0x400) tmp |= 0x10;
-	write3X4(CRTHiOrd, tmp);
+	write3X4(par, CRTHiOrd, tmp);
 
 	tmp = 0;
 	if (htotal & 0x800) tmp |= 0x800 >> 11;
 	if (hblankstart & 0x800) tmp |= 0x800 >> 7;
-	write3X4(HorizOverflow, tmp);
+	write3X4(par, HorizOverflow, tmp);
 
 	tmp = 0x40;
 	if (vblankstart & 0x200) tmp |= 0x20;
 //FIXME	if (info->var.vmode & FB_VMODE_DOUBLE) tmp |= 0x80;  /* double scan for 200 line modes */
-	write3X4(CRTMaxScanLine, tmp);
+	write3X4(par, CRTMaxScanLine, tmp);
 
-	write3X4(CRTLineCompare, 0xFF);
-	write3X4(CRTPRowScan, 0);
-	write3X4(CRTModeControl, 0xC3);
+	write3X4(par, CRTLineCompare, 0xFF);
+	write3X4(par, CRTPRowScan, 0);
+	write3X4(par, CRTModeControl, 0xC3);
 
-	write3X4(LinearAddReg, 0x20);	/* enable linear addressing */
+	write3X4(par, LinearAddReg, 0x20);	/* enable linear addressing */
 
 	tmp = (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80;
-	write3X4(CRTCModuleTest, tmp);	/* enable access extended memory */
+	/* enable access extended memory */
+	write3X4(par, CRTCModuleTest, tmp);
 
-	write3X4(GraphEngReg, 0x80);	/* enable GE for text acceleration */
+	/* enable GE for text acceleration */
+	write3X4(par, GraphEngReg, 0x80);
 
 #ifdef CONFIG_FB_TRIDENT_ACCEL
-	acc->init_accel(info->var.xres, bpp);
+	acc->init_accel(par, info->var.xres, bpp);
 #endif
 
 	switch (bpp) {
@@ -1003,49 +1038,52 @@ static int tridentfb_set_par(struct fb_info *info)
 		break;
 	}
 
-	write3X4(PixelBusReg, tmp);
+	write3X4(par, PixelBusReg, tmp);
 
 	tmp = 0x10;
 	if (chipcyber)
 		tmp |= 0x20;
-	write3X4(DRAMControl, tmp);	/* both IO, linear enable */
+	write3X4(par, DRAMControl, tmp);	/* both IO, linear enable */
 
-	write3X4(InterfaceSel, read3X4(InterfaceSel) | 0x40);
-	write3X4(Performance, 0x92);
-	write3X4(PCIReg, 0x07);		/* MMIO & PCI read and write burst enable */
+	write3X4(par, InterfaceSel, read3X4(par, InterfaceSel) | 0x40);
+	write3X4(par, Performance, 0x92);
+	/* MMIO & PCI read and write burst enable */
+	write3X4(par, PCIReg, 0x07);
 
 	/* convert from picoseconds to kHz */
 	vclk = PICOS2KHZ(info->var.pixclock);
 	if (bpp == 32)
 		vclk *= 2;
-	set_vclk(vclk);
+	set_vclk(par, vclk);
 
-	write3C4(0, 3);
-	write3C4(1, 1);		/* set char clock 8 dots wide */
-	write3C4(2, 0x0F);	/* enable 4 maps because needed in chain4 mode */
-	write3C4(3, 0);
-	write3C4(4, 0x0E);	/* memory mode enable bitmaps ?? */
+	write3C4(par, 0, 3);
+	write3C4(par, 1, 1);		/* set char clock 8 dots wide */
+	/* enable 4 maps because needed in chain4 mode */
+	write3C4(par, 2, 0x0F);
+	write3C4(par, 3, 0);
+	write3C4(par, 4, 0x0E);	/* memory mode enable bitmaps ?? */
 
-	write3CE(MiscExtFunc, (bpp == 32) ? 0x1A : 0x12);	/* divide clock by 2 if 32bpp */
-							/* chain4 mode display and CPU path */
-	write3CE(0x5, 0x40);	/* no CGA compat, allow 256 col */
-	write3CE(0x6, 0x05);	/* graphics mode */
-	write3CE(0x7, 0x0F);	/* planes? */
+	/* divide clock by 2 if 32bpp chain4 mode display and CPU path */
+	write3CE(par, MiscExtFunc, (bpp == 32) ? 0x1A : 0x12);
+	write3CE(par, 0x5, 0x40);	/* no CGA compat, allow 256 col */
+	write3CE(par, 0x6, 0x05);	/* graphics mode */
+	write3CE(par, 0x7, 0x0F);	/* planes? */
 
 	if (chip_id == CYBERBLADEXPAi1) {
 		/* This fixes snow-effect in 32 bpp */
-		write3X4(CRTHSyncStart, 0x84);
+		write3X4(par, CRTHSyncStart, 0x84);
 	}
 
-	writeAttr(0x10, 0x41);	/* graphics mode and support 256 color modes */
-	writeAttr(0x12, 0x0F);	/* planes */
-	writeAttr(0x13, 0);	/* horizontal pel panning */
+	/* graphics mode and support 256 color modes */
+	writeAttr(par, 0x10, 0x41);
+	writeAttr(par, 0x12, 0x0F);	/* planes */
+	writeAttr(par, 0x13, 0);	/* horizontal pel panning */
 
 	/* colors */
 	for (tmp = 0; tmp < 0x10; tmp++)
-		writeAttr(tmp, tmp);
-	readb(par->io_virt + CRT + 0x0A);	/* flip-flop to index */
-	t_outb(0x20, 0x3C0);			/* enable attr */
+		writeAttr(par, tmp, tmp);
+	fb_readb(par->io_virt + CRT + 0x0A);	/* flip-flop to index */
+	t_outb(par, 0x20, 0x3C0);		/* enable attr */
 
 	switch (bpp) {
 	case 8:
@@ -1063,17 +1101,17 @@ static int tridentfb_set_par(struct fb_info *info)
 		break;
 	}
 
-	t_inb(0x3C8);
-	t_inb(0x3C6);
-	t_inb(0x3C6);
-	t_inb(0x3C6);
-	t_inb(0x3C6);
-	t_outb(tmp, 0x3C6);
-	t_inb(0x3C8);
+	t_inb(par, 0x3C8);
+	t_inb(par, 0x3C6);
+	t_inb(par, 0x3C6);
+	t_inb(par, 0x3C6);
+	t_inb(par, 0x3C6);
+	t_outb(par, tmp, 0x3C6);
+	t_inb(par, 0x3C8);
 
 	if (flatpanel)
-		set_number_of_lines(info->var.yres);
-	set_lwidth(info->var.xres * bpp / (4 * 16));
+		set_number_of_lines(par, info->var.yres);
+	set_lwidth(par, info->var.xres * bpp / (4 * 16));
 	info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
 	info->fix.line_length = info->var.xres * (bpp >> 3);
 	info->cmap.len = (bpp == 8) ? 256 : 16;
@@ -1087,17 +1125,18 @@ static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			       struct fb_info *info)
 {
 	int bpp = info->var.bits_per_pixel;
+	struct tridentfb_par *par = info->par;
 
 	if (regno >= info->cmap.len)
 		return 1;
 
 	if (bpp == 8) {
-		t_outb(0xFF, 0x3C6);
-		t_outb(regno, 0x3C8);
+		t_outb(par, 0xFF, 0x3C6);
+		t_outb(par, regno, 0x3C8);
 
-		t_outb(red >> 10, 0x3C9);
-		t_outb(green >> 10, 0x3C9);
-		t_outb(blue >> 10, 0x3C9);
+		t_outb(par, red >> 10, 0x3C9);
+		t_outb(par, green >> 10, 0x3C9);
+		t_outb(par, blue >> 10, 0x3C9);
 
 	} else if (regno < 16) {
 		if (bpp == 16) {	/* RGB 565 */
@@ -1123,13 +1162,14 @@ static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 static int tridentfb_blank(int blank_mode, struct fb_info *info)
 {
 	unsigned char PMCont, DPMSCont;
+	struct tridentfb_par *par = info->par;
 
 	debug("enter\n");
 	if (flatpanel)
 		return 0;
-	t_outb(0x04, 0x83C8); /* Read DPMS Control */
-	PMCont = t_inb(0x83C6) & 0xFC;
-	DPMSCont = read3CE(PowerStatus) & 0xFC;
+	t_outb(par, 0x04, 0x83C8); /* Read DPMS Control */
+	PMCont = t_inb(par, 0x83C6) & 0xFC;
+	DPMSCont = read3CE(par, PowerStatus) & 0xFC;
 	switch (blank_mode) {
 	case FB_BLANK_UNBLANK:
 		/* Screen: On, HSync: On, VSync: On */
@@ -1155,9 +1195,9 @@ static int tridentfb_blank(int blank_mode, struct fb_info *info)
 		break;
 	}
 
-	write3CE(PowerStatus, DPMSCont);
-	t_outb(4, 0x83C8);
-	t_outb(PMCont, 0x83C6);
+	write3CE(par, PowerStatus, DPMSCont);
+	t_outb(par, 4, 0x83C8);
+	t_outb(par, PMCont, 0x83C6);
 
 	debug("exit\n");
 
@@ -1265,11 +1305,11 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
 
 	/* setup framebuffer memory */
 	tridentfb_fix.smem_start = pci_resource_start(dev, 0);
-	tridentfb_fix.smem_len = get_memsize();
+	tridentfb_fix.smem_len = get_memsize(&default_par);
 
 	if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
 		debug("request_mem_region failed!\n");
-		disable_mmio();
+		disable_mmio(fb_info.par);
 		err = -1;
 		goto out_unmap1;
 	}
@@ -1284,10 +1324,10 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
 	}
 
 	output("%s board found\n", pci_name(dev));
-	displaytype = get_displaytype();
+	displaytype = get_displaytype(&default_par);
 
 	if (flatpanel)
-		nativex = get_nativex();
+		nativex = get_nativex(&default_par);
 
 	fb_info.fix = tridentfb_fix;
 	fb_info.fbops = &tridentfb_ops;
@@ -1330,7 +1370,7 @@ out_unmap2:
 	if (fb_info.screen_base)
 		iounmap(fb_info.screen_base);
 	release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
-	disable_mmio();
+	disable_mmio(fb_info.par);
 out_unmap1:
 	if (default_par.io_virt)
 		iounmap(default_par.io_virt);
-- 
cgit v1.2.3


From e09ed099d0169ac3a22b17cfeece0fa54a9e43eb Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:51 -0700
Subject: tridentfb: convert fb_info into allocated one

This patch converts fb_info structure from global variable to allocatable one.

The global default_par is moved into function variable.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 82 ++++++++++++++++++++++++++---------------------
 1 file changed, 46 insertions(+), 36 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 3e8a1ef892c..cb37e10734b 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -33,10 +33,7 @@ struct tridentfb_par {
 static unsigned char eng_oper;	/* engine operation... */
 static struct fb_ops tridentfb_ops;
 
-static struct tridentfb_par default_par;
-
 /* FIXME:kmalloc these 3 instead */
-static struct fb_info fb_info;
 static u32 pseudo_pal[16];
 
 static struct fb_var_screeninfo default_var;
@@ -1217,16 +1214,23 @@ static struct fb_ops tridentfb_ops = {
 	.fb_imageblit = cfb_imageblit,
 };
 
-static int __devinit trident_pci_probe(struct pci_dev * dev,
-				       const struct pci_device_id * id)
+static int __devinit trident_pci_probe(struct pci_dev *dev,
+				       const struct pci_device_id *id)
 {
 	int err;
 	unsigned char revision;
+	struct fb_info *info;
+	struct tridentfb_par *default_par;
 
 	err = pci_enable_device(dev);
 	if (err)
 		return err;
 
+	info = framebuffer_alloc(sizeof(struct tridentfb_par), &dev->dev);
+	if (!info)
+		return -ENOMEM;
+	default_par = info->par;
+
 	chip_id = id->device;
 
 	if (chip_id == CYBERBLADEi1)
@@ -1282,8 +1286,6 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
 	/* acceleration is on by default for 3D chips */
 	defaultaccel = chip3D && !noaccel;
 
-	fb_info.par = &default_par;
-
 	/* setup MMIO region */
 	tridentfb_fix.mmio_start = pci_resource_start(dev, 1);
 	tridentfb_fix.mmio_len = chip3D ? 0x20000 : 0x10000;
@@ -1293,9 +1295,10 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
 		return -1;
 	}
 
-	default_par.io_virt = ioremap_nocache(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
+	default_par->io_virt = ioremap_nocache(tridentfb_fix.mmio_start,
+					       tridentfb_fix.mmio_len);
 
-	if (!default_par.io_virt) {
+	if (!default_par->io_virt) {
 		debug("ioremap failed\n");
 		err = -1;
 		goto out_unmap1;
@@ -1305,46 +1308,46 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
 
 	/* setup framebuffer memory */
 	tridentfb_fix.smem_start = pci_resource_start(dev, 0);
-	tridentfb_fix.smem_len = get_memsize(&default_par);
+	tridentfb_fix.smem_len = get_memsize(default_par);
 
 	if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
 		debug("request_mem_region failed!\n");
-		disable_mmio(fb_info.par);
+		disable_mmio(info->par);
 		err = -1;
 		goto out_unmap1;
 	}
 
-	fb_info.screen_base = ioremap_nocache(tridentfb_fix.smem_start,
-					      tridentfb_fix.smem_len);
+	info->screen_base = ioremap_nocache(tridentfb_fix.smem_start,
+					    tridentfb_fix.smem_len);
 
-	if (!fb_info.screen_base) {
+	if (!info->screen_base) {
 		debug("ioremap failed\n");
 		err = -1;
 		goto out_unmap2;
 	}
 
 	output("%s board found\n", pci_name(dev));
-	displaytype = get_displaytype(&default_par);
+	displaytype = get_displaytype(default_par);
 
 	if (flatpanel)
-		nativex = get_nativex(&default_par);
+		nativex = get_nativex(default_par);
 
-	fb_info.fix = tridentfb_fix;
-	fb_info.fbops = &tridentfb_ops;
+	info->fix = tridentfb_fix;
+	info->fbops = &tridentfb_ops;
 
 
-	fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
 #ifdef CONFIG_FB_TRIDENT_ACCEL
-	fb_info.flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
+	info->flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
 #endif
-	fb_info.pseudo_palette = pseudo_pal;
+	info->pseudo_palette = pseudo_pal;
 
-	if (!fb_find_mode(&default_var, &fb_info,
+	if (!fb_find_mode(&default_var, info,
 			  mode_option, NULL, 0, NULL, bpp)) {
 		err = -EINVAL;
 		goto out_unmap2;
 	}
-	err = fb_alloc_cmap(&fb_info.cmap, 256, 0);
+	err = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (err < 0)
 		goto out_unmap2;
 
@@ -1353,39 +1356,46 @@ static int __devinit trident_pci_probe(struct pci_dev * dev,
 	else
 		default_var.accel_flags &= ~FB_ACCELF_TEXT;
 	default_var.activate |= FB_ACTIVATE_NOW;
-	fb_info.var = default_var;
-	fb_info.device = &dev->dev;
-	if (register_framebuffer(&fb_info) < 0) {
+	info->var = default_var;
+	info->device = &dev->dev;
+	if (register_framebuffer(info) < 0) {
 		printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
-		fb_dealloc_cmap(&fb_info.cmap);
+		fb_dealloc_cmap(&info->cmap);
 		err = -EINVAL;
 		goto out_unmap2;
 	}
 	output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
-	   fb_info.node, fb_info.fix.id, default_var.xres,
+	   info->node, info->fix.id, default_var.xres,
 	   default_var.yres, default_var.bits_per_pixel);
+
+	pci_set_drvdata(dev, info);
 	return 0;
 
 out_unmap2:
-	if (fb_info.screen_base)
-		iounmap(fb_info.screen_base);
+	if (info->screen_base)
+		iounmap(info->screen_base);
 	release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
-	disable_mmio(fb_info.par);
+	disable_mmio(info->par);
 out_unmap1:
-	if (default_par.io_virt)
-		iounmap(default_par.io_virt);
+	if (default_par->io_virt)
+		iounmap(default_par->io_virt);
 	release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
+	framebuffer_release(info);
 	return err;
 }
 
 static void __devexit trident_pci_remove(struct pci_dev *dev)
 {
-	struct tridentfb_par *par = (struct tridentfb_par*)fb_info.par;
-	unregister_framebuffer(&fb_info);
+	struct fb_info *info = pci_get_drvdata(dev);
+	struct tridentfb_par *par = info->par;
+
+	unregister_framebuffer(info);
 	iounmap(par->io_virt);
-	iounmap(fb_info.screen_base);
+	iounmap(info->screen_base);
 	release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
 	release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
+	pci_set_drvdata(dev, NULL);
+	framebuffer_release(info);
 }
 
 /* List of boards that we are trying to support */
-- 
cgit v1.2.3


From ea8ee55c12f77cbbb6e067f91e0cd794baa692ab Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:51 -0700
Subject: tridentfb: move global pseudo palette into structure

This patch moves pseudo palette int tridentfb_par structure and removes global
default_var.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index cb37e10734b..0f6e4054c99 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -28,16 +28,12 @@
 
 struct tridentfb_par {
 	void __iomem *io_virt;	/* iospace virtual memory address */
+	u32 pseudo_pal[16];
 };
 
 static unsigned char eng_oper;	/* engine operation... */
 static struct fb_ops tridentfb_ops;
 
-/* FIXME:kmalloc these 3 instead */
-static u32 pseudo_pal[16];
-
-static struct fb_var_screeninfo default_var;
-
 static struct fb_fix_screeninfo tridentfb_fix = {
 	.id = "Trident",
 	.type = FB_TYPE_PACKED_PIXELS,
@@ -1340,9 +1336,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 #ifdef CONFIG_FB_TRIDENT_ACCEL
 	info->flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
 #endif
-	info->pseudo_palette = pseudo_pal;
-
-	if (!fb_find_mode(&default_var, info,
+	if (!fb_find_mode(&info->var, info,
 			  mode_option, NULL, 0, NULL, bpp)) {
 		err = -EINVAL;
 		goto out_unmap2;
@@ -1352,11 +1346,10 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		goto out_unmap2;
 
 	if (defaultaccel && acc)
-		default_var.accel_flags |= FB_ACCELF_TEXT;
+		info->var.accel_flags |= FB_ACCELF_TEXT;
 	else
-		default_var.accel_flags &= ~FB_ACCELF_TEXT;
-	default_var.activate |= FB_ACTIVATE_NOW;
-	info->var = default_var;
+		info->var.accel_flags &= ~FB_ACCELF_TEXT;
+	info->var.activate |= FB_ACTIVATE_NOW;
 	info->device = &dev->dev;
 	if (register_framebuffer(info) < 0) {
 		printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
@@ -1365,8 +1358,8 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		goto out_unmap2;
 	}
 	output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
-	   info->node, info->fix.id, default_var.xres,
-	   default_var.yres, default_var.bits_per_pixel);
+	   info->node, info->fix.id, info->var.xres,
+	   info->var.yres, info->var.bits_per_pixel);
 
 	pci_set_drvdata(dev, info);
 	return 0;
-- 
cgit v1.2.3


From 122e8ad3cbf172043ea93f2db8e107fa9f9b0192 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:52 -0700
Subject: tridentfb: move global chip_id into structure

This patch moves the chip_id into tridentfb_par structure and removes global
chip_id related constants.

It also bumps version of the driver to 0.7.9

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 0f6e4054c99..dfe52b424c9 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -24,11 +24,12 @@
 #include <linux/delay.h>
 #include <video/trident.h>
 
-#define VERSION		"0.7.8-NEWAPI"
+#define VERSION		"0.7.9-NEWAPI"
 
 struct tridentfb_par {
 	void __iomem *io_virt;	/* iospace virtual memory address */
 	u32 pseudo_pal[16];
+	int chip_id;
 };
 
 static unsigned char eng_oper;	/* engine operation... */
@@ -42,9 +43,6 @@ static struct fb_fix_screeninfo tridentfb_fix = {
 	.accel = FB_ACCEL_NONE,
 };
 
-static int chip_id;
-
-static int defaultaccel;
 static int displaytype;
 
 /* defaults which are normally overriden by user values */
@@ -79,9 +77,6 @@ module_param(nativex, int, 0);
 module_param(fp, int, 0);
 module_param(crt, int, 0);
 
-static int chip3D;
-static int chipcyber;
-
 static int is3Dchip(int id)
 {
 	return ((id == BLADE3D) || (id == CYBERBLADEE4) ||
@@ -658,7 +653,7 @@ static void set_lwidth(struct tridentfb_par *par, int width)
 /* For resolutions smaller than FP resolution stretch */
 static void screen_stretch(struct tridentfb_par *par)
 {
-	if (chip_id != CYBERBLADEXPAi1)
+	if (par->chip_id != CYBERBLADEXPAi1)
 		write3CE(par, BiosReg, 0);
 	else
 		write3CE(par, BiosReg, 8);
@@ -706,7 +701,7 @@ static void set_vclk(struct tridentfb_par *par, unsigned long freq)
 				if (fi > freq)
 					break;
 			}
-	if (chip3D) {
+	if (is3Dchip(par->chip_id)) {
 		write3C4(par, ClockHigh, hi);
 		write3C4(par, ClockLow, lo);
 	} else {
@@ -739,7 +734,7 @@ static unsigned int __devinit get_displaytype(struct tridentfb_par *par)
 {
 	if (fp)
 		return DISPLAY_FP;
-	if (crt || !chipcyber)
+	if (crt || !iscyber(par->chip_id))
 		return DISPLAY_CRT;
 	return (read3CE(par, FPConfig) & 0x10) ? DISPLAY_FP : DISPLAY_CRT;
 }
@@ -754,7 +749,7 @@ static unsigned int __devinit get_memsize(struct tridentfb_par *par)
 	if (memsize)
 		k = memsize * Kb;
 	else
-		switch (chip_id) {
+		switch (par->chip_id) {
 		case CYBER9525DVD:
 			k = 2560 * Kb;
 			break;
@@ -1034,7 +1029,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	write3X4(par, PixelBusReg, tmp);
 
 	tmp = 0x10;
-	if (chipcyber)
+	if (iscyber(par->chip_id))
 		tmp |= 0x20;
 	write3X4(par, DRAMControl, tmp);	/* both IO, linear enable */
 
@@ -1062,7 +1057,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	write3CE(par, 0x6, 0x05);	/* graphics mode */
 	write3CE(par, 0x7, 0x0F);	/* planes? */
 
-	if (chip_id == CYBERBLADEXPAi1) {
+	if (par->chip_id == CYBERBLADEXPAi1) {
 		/* This fixes snow-effect in 32 bpp */
 		write3X4(par, CRTHSyncStart, 0x84);
 	}
@@ -1217,6 +1212,9 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	unsigned char revision;
 	struct fb_info *info;
 	struct tridentfb_par *default_par;
+	int defaultaccel;
+	int chip3D;
+	int chip_id;
 
 	err = pci_enable_device(dev);
 	if (err)
@@ -1269,7 +1267,6 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	}
 
 	chip3D = is3Dchip(chip_id);
-	chipcyber = iscyber(chip_id);
 
 	if (is_xp(chip_id)) {
 		acc = &accel_xp;
@@ -1279,6 +1276,8 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		acc = &accel_image;
 	}
 
+	default_par->chip_id = chip_id;
+
 	/* acceleration is on by default for 3D chips */
 	defaultaccel = chip3D && !noaccel;
 
-- 
cgit v1.2.3


From 6eed8e1ec8532a6cd10c8b27236bde023c52c56a Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:53 -0700
Subject: tridentfb: move global flat panel variable into structure

This patch moves flat panel indicator into tridentfb_par structure and removes
related global variables and macros.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 44 +++++++++++++++++++++++---------------------
 include/video/trident.h   |  6 ------
 2 files changed, 23 insertions(+), 27 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index dfe52b424c9..604b10a590d 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -30,6 +30,7 @@ struct tridentfb_par {
 	void __iomem *io_virt;	/* iospace virtual memory address */
 	u32 pseudo_pal[16];
 	int chip_id;
+	int flatpanel;
 };
 
 static unsigned char eng_oper;	/* engine operation... */
@@ -43,24 +44,22 @@ static struct fb_fix_screeninfo tridentfb_fix = {
 	.accel = FB_ACCEL_NONE,
 };
 
-static int displaytype;
-
 /* defaults which are normally overriden by user values */
 
 /* video mode */
 static char *mode_option __devinitdata = "640x480";
-static int bpp = 8;
+static int bpp __devinitdata = 8;
 
-static int noaccel;
+static int noaccel __devinitdata;
 
 static int center;
 static int stretch;
 
-static int fp;
-static int crt;
+static int fp __devinitdata;
+static int crt __devinitdata;
 
-static int memsize;
-static int memdiff;
+static int memsize __devinitdata;
+static int memdiff __devinitdata;
 static int nativex;
 
 module_param(mode_option, charp, 0);
@@ -75,7 +74,9 @@ module_param(memsize, int, 0);
 module_param(memdiff, int, 0);
 module_param(nativex, int, 0);
 module_param(fp, int, 0);
+MODULE_PARM_DESC(fp, "Define if flatpanel is connected");
 module_param(crt, int, 0);
+MODULE_PARM_DESC(crt, "Define if CRT is connected");
 
 static int is3Dchip(int id)
 {
@@ -728,15 +729,15 @@ static void set_number_of_lines(struct tridentfb_par *par, int lines)
 
 /*
  * If we see that FP is active we assume we have one.
- * Otherwise we have a CRT display.User can override.
+ * Otherwise we have a CRT display. User can override.
  */
-static unsigned int __devinit get_displaytype(struct tridentfb_par *par)
+static int __devinit is_flatpanel(struct tridentfb_par *par)
 {
 	if (fp)
-		return DISPLAY_FP;
+		return 1;
 	if (crt || !iscyber(par->chip_id))
-		return DISPLAY_CRT;
-	return (read3CE(par, FPConfig) & 0x10) ? DISPLAY_FP : DISPLAY_CRT;
+		return 0;
+	return (read3CE(par, FPConfig) & 0x10) ? 1 : 0;
 }
 
 /* Try detecting the video memory size */
@@ -824,6 +825,7 @@ static unsigned int __devinit get_memsize(struct tridentfb_par *par)
 static int tridentfb_check_var(struct fb_var_screeninfo *var,
 			       struct fb_info *info)
 {
+	struct tridentfb_par *par = info->par;
 	int bpp = var->bits_per_pixel;
 	debug("enter\n");
 
@@ -831,7 +833,7 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 	if (bpp == 24)
 		bpp = var->bits_per_pixel = 32;
 	/* check whether resolution fits on panel and in memory */
-	if (flatpanel && nativex && var->xres > nativex)
+	if (par->flatpanel && nativex && var->xres > nativex)
 		return -EINVAL;
 	if (var->xres * var->yres_virtual * bpp / 8 > info->fix.smem_len)
 		return -EINVAL;
@@ -928,7 +930,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	crtc_unlock(par);
 	write3CE(par, CyberControl, 8);
 
-	if (flatpanel && var->xres < nativex) {
+	if (par->flatpanel && var->xres < nativex) {
 		/*
 		 * on flat panels with native size larger
 		 * than requested resolution decide whether
@@ -1097,7 +1099,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	t_outb(par, tmp, 0x3C6);
 	t_inb(par, 0x3C8);
 
-	if (flatpanel)
+	if (par->flatpanel)
 		set_number_of_lines(par, info->var.yres);
 	set_lwidth(par, info->var.xres * bpp / (4 * 16));
 	info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
@@ -1153,7 +1155,7 @@ static int tridentfb_blank(int blank_mode, struct fb_info *info)
 	struct tridentfb_par *par = info->par;
 
 	debug("enter\n");
-	if (flatpanel)
+	if (par->flatpanel)
 		return 0;
 	t_outb(par, 0x04, 0x83C8); /* Read DPMS Control */
 	PMCont = t_inb(par, 0x83C6) & 0xFC;
@@ -1322,9 +1324,9 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	}
 
 	output("%s board found\n", pci_name(dev));
-	displaytype = get_displaytype(default_par);
+	default_par->flatpanel = is_flatpanel(default_par);
 
-	if (flatpanel)
+	if (default_par->flatpanel)
 		nativex = get_nativex(default_par);
 
 	info->fix = tridentfb_fix;
@@ -1441,9 +1443,9 @@ static int __init tridentfb_setup(char *options)
 		if (!strncmp(opt, "noaccel", 7))
 			noaccel = 1;
 		else if (!strncmp(opt, "fp", 2))
-			displaytype = DISPLAY_FP;
+			fp = 1;
 		else if (!strncmp(opt, "crt", 3))
-			displaytype = DISPLAY_CRT;
+			fp = 0;
 		else if (!strncmp(opt, "bpp=", 4))
 			bpp = simple_strtoul(opt + 4, NULL, 0);
 		else if (!strncmp(opt, "center", 6))
diff --git a/include/video/trident.h b/include/video/trident.h
index 200be255168..d3dd737a1ba 100644
--- a/include/video/trident.h
+++ b/include/video/trident.h
@@ -63,12 +63,6 @@
 #define LCD_CENTER	1
 #define LCD_BIOS	2
 
-/* display types */
-#define DISPLAY_CRT	0
-#define DISPLAY_FP	1
-
-#define flatpanel (displaytype == DISPLAY_FP)
-
 /* General Registers */
 #define SPR	0x1F		/* Software Programming Register (videoram) */
 
-- 
cgit v1.2.3


From e0759a5fbba12e0f2c9149d85bea1ec7df0178fd Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:53 -0700
Subject: tridentfb: convert is_blade and is_xp macros into functions

This patch converts the is_blade() and is_xp() macros into local functions.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 19 +++++++++++++++++++
 include/video/trident.h   | 19 -------------------
 2 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 604b10a590d..e87f77093ec 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -78,6 +78,25 @@ MODULE_PARM_DESC(fp, "Define if flatpanel is connected");
 module_param(crt, int, 0);
 MODULE_PARM_DESC(crt, "Define if CRT is connected");
 
+static int is_blade(int id)
+{
+	return	(id == BLADE3D) ||
+		(id == CYBERBLADEE4) ||
+		(id == CYBERBLADEi7) ||
+		(id == CYBERBLADEi7D) ||
+		(id == CYBERBLADEi1) ||
+		(id == CYBERBLADEi1D) ||
+		(id == CYBERBLADEAi1) ||
+		(id == CYBERBLADEAi1D);
+}
+
+static int is_xp(int id)
+{
+	return	(id == CYBERBLADEXPAi1) ||
+		(id == CYBERBLADEXPm8) ||
+		(id == CYBERBLADEXPm16);
+}
+
 static int is3Dchip(int id)
 {
 	return ((id == BLADE3D) || (id == CYBERBLADEE4) ||
diff --git a/include/video/trident.h b/include/video/trident.h
index d3dd737a1ba..9c3670b2890 100644
--- a/include/video/trident.h
+++ b/include/video/trident.h
@@ -39,25 +39,6 @@
 #define CYBERBLADEXPm8  0x9910
 #define CYBERBLADEXPm16 0x9930
 
-/* acceleration families */
-#define IMAGE	0
-#define BLADE	1
-#define XP	2
-
-#define is_image(id)	
-#define is_xp(id)	((id == CYBERBLADEXPAi1) ||\
-			 (id == CYBERBLADEXPm8) ||\
-			 (id == CYBERBLADEXPm16)) 
-
-#define is_blade(id)	((id == BLADE3D) ||\
-			 (id == CYBERBLADEE4) ||\
-			 (id == CYBERBLADEi7) ||\
-			 (id == CYBERBLADEi7D) ||\
-			 (id == CYBERBLADEi1) ||\
-			 (id == CYBERBLADEi1D) ||\
-			 (id ==	CYBERBLADEAi1) ||\
-			 (id ==	CYBERBLADEAi1D))
-
 /* these defines are for 'lcd' variable */
 #define LCD_STRETCH	0
 #define LCD_CENTER	1
-- 
cgit v1.2.3


From d9cad04bcde00411976402eda726199ac13b29ca Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:54 -0700
Subject: tridentfb: move global acceleration hooks into structure

This patch moves acceleration hooks into the tridentfb_par structure and
removes global hooks.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 63 ++++++++++++++++++-----------------------------
 1 file changed, 24 insertions(+), 39 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index e87f77093ec..d6796448c5a 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -31,6 +31,12 @@ struct tridentfb_par {
 	u32 pseudo_pal[16];
 	int chip_id;
 	int flatpanel;
+	void (*init_accel) (struct tridentfb_par *, int, int);
+	void (*wait_engine) (struct tridentfb_par *);
+	void (*fill_rect)
+		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
+	void (*copy_rect)
+		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
 };
 
 static unsigned char eng_oper;	/* engine operation... */
@@ -155,15 +161,6 @@ static inline u8 t_inb(struct tridentfb_par *p, u16 reg)
 	return fb_readb(p->io_virt + reg);
 }
 
-static struct accel_switch {
-	void (*init_accel) (struct tridentfb_par *, int, int);
-	void (*wait_engine) (struct tridentfb_par *);
-	void (*fill_rect)
-		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
-	void (*copy_rect)
-		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
-} *acc;
-
 static inline void writemmr(struct tridentfb_par *par, u16 r, u32 v)
 {
 	fb_writel(v, par->io_virt + r);
@@ -259,13 +256,6 @@ static void blade_copy_rect(struct tridentfb_par *par,
 	writemmr(par, DR2, direction ? d1 : d2);
 }
 
-static struct accel_switch accel_blade = {
-	blade_init_accel,
-	blade_wait_engine,
-	blade_fill_rect,
-	blade_copy_rect,
-};
-
 /*
  * BladeXP specific acceleration functions
  */
@@ -405,13 +395,6 @@ static void xp_copy_rect(struct tridentfb_par *par,
 	t_outb(par, 0x01, 0x2124);
 }
 
-static struct accel_switch accel_xp = {
-	xp_init_accel,
-	xp_wait_engine,
-	xp_fill_rect,
-	xp_copy_rect,
-};
-
 /*
  * Image specific acceleration functions
  */
@@ -491,13 +474,6 @@ static void image_copy_rect(struct tridentfb_par *par,
 		 0x80000000 | 1 << 22 | 1 << 10 | 1 << 7 | direction);
 }
 
-static struct accel_switch accel_image = {
-	image_init_accel,
-	image_wait_engine,
-	image_fill_rect,
-	image_copy_rect,
-};
-
 /*
  * Accel functions called by the upper layers
  */
@@ -524,18 +500,18 @@ static void tridentfb_fillrect(struct fb_info *info,
 		break;
 	}
 
-	acc->fill_rect(par, fr->dx, fr->dy, fr->width,
+	par->fill_rect(par, fr->dx, fr->dy, fr->width,
 		       fr->height, col, fr->rop);
-	acc->wait_engine(par);
+	par->wait_engine(par);
 }
 static void tridentfb_copyarea(struct fb_info *info,
 			       const struct fb_copyarea *ca)
 {
 	struct tridentfb_par *par = info->par;
 
-	acc->copy_rect(par, ca->sx, ca->sy, ca->dx, ca->dy,
+	par->copy_rect(par, ca->sx, ca->sy, ca->dx, ca->dy,
 		       ca->width, ca->height);
-	acc->wait_engine(par);
+	par->wait_engine(par);
 }
 #else /* !CONFIG_FB_TRIDENT_ACCEL */
 #define tridentfb_fillrect cfb_fillrect
@@ -1029,7 +1005,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	write3X4(par, GraphEngReg, 0x80);
 
 #ifdef CONFIG_FB_TRIDENT_ACCEL
-	acc->init_accel(par, info->var.xres, bpp);
+	par->init_accel(par, info->var.xres, bpp);
 #endif
 
 	switch (bpp) {
@@ -1290,11 +1266,20 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	chip3D = is3Dchip(chip_id);
 
 	if (is_xp(chip_id)) {
-		acc = &accel_xp;
+		default_par->init_accel = xp_init_accel;
+		default_par->wait_engine = xp_wait_engine;
+		default_par->fill_rect = xp_fill_rect;
+		default_par->copy_rect = xp_copy_rect;
 	} else if (is_blade(chip_id)) {
-		acc = &accel_blade;
+		default_par->init_accel = blade_init_accel;
+		default_par->wait_engine = blade_wait_engine;
+		default_par->fill_rect = blade_fill_rect;
+		default_par->copy_rect = blade_copy_rect;
 	} else {
-		acc = &accel_image;
+		default_par->init_accel = image_init_accel;
+		default_par->wait_engine = image_wait_engine;
+		default_par->fill_rect = image_fill_rect;
+		default_par->copy_rect = image_copy_rect;
 	}
 
 	default_par->chip_id = chip_id;
@@ -1365,7 +1350,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	if (err < 0)
 		goto out_unmap2;
 
-	if (defaultaccel && acc)
+	if (defaultaccel && default_par->init_accel)
 		info->var.accel_flags |= FB_ACCELF_TEXT;
 	else
 		info->var.accel_flags &= ~FB_ACCELF_TEXT;
-- 
cgit v1.2.3


From 10172ed6dc4d40ff42bf5ce2dd2f65f401a93696 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:54 -0700
Subject: tridentfb: make use of functions and constants from the vga.h

Make use of functions and constants from the vga.h header to compact the code
and make it more readable.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 144 ++++++++++++++++++++--------------------------
 include/video/trident.h   |  26 ---------
 2 files changed, 61 insertions(+), 109 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index d6796448c5a..381e5853df6 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -22,6 +22,7 @@
 #include <linux/pci.h>
 
 #include <linux/delay.h>
+#include <video/vga.h>
 #include <video/trident.h>
 
 #define VERSION		"0.7.9-NEWAPI"
@@ -149,8 +150,6 @@ static int iscyber(int id)
 	}
 }
 
-#define CRT 0x3D0		/* CRTC registers offset for color display */
-
 static inline void t_outb(struct tridentfb_par *p, u8 val, u16 reg)
 {
 	fb_writeb(val, p->io_virt + reg);
@@ -525,60 +524,41 @@ static void tridentfb_copyarea(struct fb_info *info,
 
 static inline unsigned char read3X4(struct tridentfb_par *par, int reg)
 {
-	writeb(reg, par->io_virt + CRT + 4);
-	return readb(par->io_virt + CRT + 5);
+	return vga_mm_rcrt(par->io_virt, reg);
 }
 
 static inline void write3X4(struct tridentfb_par *par, int reg,
 			    unsigned char val)
 {
-	writeb(reg, par->io_virt + CRT + 4);
-	writeb(val, par->io_virt + CRT + 5);
-}
-
-static inline unsigned char read3C4(struct tridentfb_par *par, int reg)
-{
-	t_outb(par, reg, 0x3C4);
-	return t_inb(par, 0x3C5);
-}
-
-static inline void write3C4(struct tridentfb_par *par, int reg,
-			    unsigned char val)
-{
-	t_outb(par, reg, 0x3C4);
-	t_outb(par, val, 0x3C5);
+	vga_mm_wcrt(par->io_virt, reg, val);
 }
 
-static inline unsigned char read3CE(struct tridentfb_par *par, int reg)
+static inline unsigned char read3CE(struct tridentfb_par *par,
+				    unsigned char reg)
 {
-	t_outb(par, reg, 0x3CE);
-	return t_inb(par, 0x3CF);
+	return vga_mm_rgfx(par->io_virt, reg);
 }
 
 static inline void writeAttr(struct tridentfb_par *par, int reg,
 			     unsigned char val)
 {
-	fb_readb(par->io_virt + CRT + 0x0A);	/* flip-flop to index */
-	t_outb(par, reg, 0x3C0);
-	t_outb(par, val, 0x3C0);
+	fb_readb(par->io_virt + VGA_IS1_RC);	/* flip-flop to index */
+	vga_mm_wattr(par->io_virt, reg, val);
 }
 
 static inline void write3CE(struct tridentfb_par *par, int reg,
 			    unsigned char val)
 {
-	t_outb(par, reg, 0x3CE);
-	t_outb(par, val, 0x3CF);
+	vga_mm_wgfx(par->io_virt, reg, val);
 }
 
 static void enable_mmio(void)
 {
 	/* Goto New Mode */
-	outb(0x0B, 0x3C4);
-	inb(0x3C5);
+	vga_io_rseq(0x0B);
 
 	/* Unprotect registers */
-	outb(NewMode1, 0x3C4);
-	outb(0x80, 0x3C5);
+	vga_io_wseq(NewMode1, 0x80);
 
 	/* Enable MMIO */
 	outb(PCIReg, 0x3D4);
@@ -588,12 +568,10 @@ static void enable_mmio(void)
 static void disable_mmio(struct tridentfb_par *par)
 {
 	/* Goto New Mode */
-	t_outb(par, 0x0B, 0x3C4);
-	t_inb(par, 0x3C5);
+	vga_mm_rseq(par->io_virt, 0x0B);
 
 	/* Unprotect registers */
-	t_outb(par, NewMode1, 0x3C4);
-	t_outb(par, 0x80, 0x3C5);
+	vga_mm_wseq(par->io_virt, NewMode1, 0x80);
 
 	/* Disable MMIO */
 	t_outb(par, PCIReg, 0x3D4);
@@ -602,7 +580,8 @@ static void disable_mmio(struct tridentfb_par *par)
 
 static void crtc_unlock(struct tridentfb_par *par)
 {
-	write3X4(par, CRTVSyncEnd, read3X4(par, CRTVSyncEnd) & 0x7F);
+	write3X4(par, VGA_CRTC_V_SYNC_END,
+		 read3X4(par, VGA_CRTC_V_SYNC_END) & 0x7F);
 }
 
 /*  Return flat panel's maximum x resolution */
@@ -641,7 +620,7 @@ static int __devinit get_nativex(struct tridentfb_par *par)
 /* Set pitch */
 static void set_lwidth(struct tridentfb_par *par, int width)
 {
-	write3X4(par, Offset, width & 0xFF);
+	write3X4(par, VGA_CRTC_OFFSET, width & 0xFF);
 	write3X4(par, AddColReg,
 		 (read3X4(par, AddColReg) & 0xCF) | ((width & 0x300) >> 4));
 }
@@ -668,8 +647,8 @@ static void screen_center(struct tridentfb_par *par)
 static void set_screen_start(struct tridentfb_par *par, int base)
 {
 	u8 tmp;
-	write3X4(par, StartAddrLow, base & 0xFF);
-	write3X4(par, StartAddrHigh, (base & 0xFF00) >> 8);
+	write3X4(par, VGA_CRTC_START_LO, base & 0xFF);
+	write3X4(par, VGA_CRTC_START_HI, (base & 0xFF00) >> 8);
 	tmp = read3X4(par, CRTCModuleTest) & 0xDF;
 	write3X4(par, CRTCModuleTest, tmp | ((base & 0x10000) >> 11));
 	tmp = read3X4(par, CRTHiOrd) & 0xF8;
@@ -698,8 +677,8 @@ static void set_vclk(struct tridentfb_par *par, unsigned long freq)
 					break;
 			}
 	if (is3Dchip(par->chip_id)) {
-		write3C4(par, ClockHigh, hi);
-		write3C4(par, ClockLow, lo);
+		vga_mm_wseq(par->io_virt, ClockHigh, hi);
+		vga_mm_wseq(par->io_virt, ClockLow, lo);
 	} else {
 		outb(lo, 0x43C8);
 		outb(hi, 0x43C9);
@@ -782,7 +761,7 @@ static unsigned int __devinit get_memsize(struct tridentfb_par *par)
 				break;
 			case 0x0E:		/* XP */
 
-				tmp2 = read3C4(par, 0xC1);
+				tmp2 = vga_mm_rseq(par->io_virt, 0xC1);
 				switch (tmp2) {
 				case 0x00:
 					k = 20 * Mb;
@@ -931,7 +910,7 @@ static int tridentfb_set_par(struct fb_info *info)
 		 * than requested resolution decide whether
 		 * we stretch or center
 		 */
-		t_outb(par, 0xEB, 0x3C2);
+		t_outb(par, 0xEB, VGA_MIS_W);
 
 		shadowmode_on(par);
 
@@ -941,26 +920,26 @@ static int tridentfb_set_par(struct fb_info *info)
 			screen_stretch(par);
 
 	} else {
-		t_outb(par, 0x2B, 0x3C2);
+		t_outb(par, 0x2B, VGA_MIS_W);
 		write3CE(par, CyberControl, 8);
 	}
 
 	/* vertical timing values */
-	write3X4(par, CRTVTotal, vtotal & 0xFF);
-	write3X4(par, CRTVDispEnd, vdispend & 0xFF);
-	write3X4(par, CRTVSyncStart, vsyncstart & 0xFF);
-	write3X4(par, CRTVSyncEnd, (vsyncend & 0x0F));
-	write3X4(par, CRTVBlankStart, vblankstart & 0xFF);
-	write3X4(par, CRTVBlankEnd, 0 /* p->vblankend & 0xFF */);
+	write3X4(par, VGA_CRTC_V_TOTAL, vtotal & 0xFF);
+	write3X4(par, VGA_CRTC_V_DISP_END, vdispend & 0xFF);
+	write3X4(par, VGA_CRTC_V_SYNC_START, vsyncstart & 0xFF);
+	write3X4(par, VGA_CRTC_V_SYNC_END, (vsyncend & 0x0F));
+	write3X4(par, VGA_CRTC_V_BLANK_START, vblankstart & 0xFF);
+	write3X4(par, VGA_CRTC_V_BLANK_END, 0 /* p->vblankend & 0xFF */);
 
 	/* horizontal timing values */
-	write3X4(par, CRTHTotal, htotal & 0xFF);
-	write3X4(par, CRTHDispEnd, hdispend & 0xFF);
-	write3X4(par, CRTHSyncStart, hsyncstart & 0xFF);
-	write3X4(par, CRTHSyncEnd,
+	write3X4(par, VGA_CRTC_H_TOTAL, htotal & 0xFF);
+	write3X4(par, VGA_CRTC_H_DISP, hdispend & 0xFF);
+	write3X4(par, VGA_CRTC_H_SYNC_START, hsyncstart & 0xFF);
+	write3X4(par, VGA_CRTC_H_SYNC_END,
 		 (hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
-	write3X4(par, CRTHBlankStart, hblankstart & 0xFF);
-	write3X4(par, CRTHBlankEnd, 0 /* (p->hblankend & 0x1F) */);
+	write3X4(par, VGA_CRTC_H_BLANK_START, hblankstart & 0xFF);
+	write3X4(par, VGA_CRTC_H_BLANK_END, 0 /* (p->hblankend & 0x1F) */);
 
 	/* higher bits of vertical timing values */
 	tmp = 0x10;
@@ -972,7 +951,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	if (vtotal & 0x200) tmp |= 0x20;
 	if (vdispend & 0x200) tmp |= 0x40;
 	if (vsyncstart & 0x200) tmp |= 0x80;
-	write3X4(par, CRTOverflow, tmp);
+	write3X4(par, VGA_CRTC_OVERFLOW, tmp);
 
 	tmp = read3X4(par, CRTHiOrd) | 0x08;	/* line compare bit 10 */
 	if (vtotal & 0x400) tmp |= 0x80;
@@ -989,11 +968,11 @@ static int tridentfb_set_par(struct fb_info *info)
 	tmp = 0x40;
 	if (vblankstart & 0x200) tmp |= 0x20;
 //FIXME	if (info->var.vmode & FB_VMODE_DOUBLE) tmp |= 0x80;  /* double scan for 200 line modes */
-	write3X4(par, CRTMaxScanLine, tmp);
+	write3X4(par, VGA_CRTC_MAX_SCAN, tmp);
 
-	write3X4(par, CRTLineCompare, 0xFF);
-	write3X4(par, CRTPRowScan, 0);
-	write3X4(par, CRTModeControl, 0xC3);
+	write3X4(par, VGA_CRTC_LINE_COMPARE, 0xFF);
+	write3X4(par, VGA_CRTC_PRESET_ROW, 0);
+	write3X4(par, VGA_CRTC_MODE, 0xC3);
 
 	write3X4(par, LinearAddReg, 0x20);	/* enable linear addressing */
 
@@ -1041,12 +1020,12 @@ static int tridentfb_set_par(struct fb_info *info)
 		vclk *= 2;
 	set_vclk(par, vclk);
 
-	write3C4(par, 0, 3);
-	write3C4(par, 1, 1);		/* set char clock 8 dots wide */
+	vga_mm_wseq(par->io_virt, 0, 3);
+	vga_mm_wseq(par->io_virt, 1, 1); /* set char clock 8 dots wide */
 	/* enable 4 maps because needed in chain4 mode */
-	write3C4(par, 2, 0x0F);
-	write3C4(par, 3, 0);
-	write3C4(par, 4, 0x0E);	/* memory mode enable bitmaps ?? */
+	vga_mm_wseq(par->io_virt, 2, 0x0F);
+	vga_mm_wseq(par->io_virt, 3, 0);
+	vga_mm_wseq(par->io_virt, 4, 0x0E); /* memory mode enable bitmaps ?? */
 
 	/* divide clock by 2 if 32bpp chain4 mode display and CPU path */
 	write3CE(par, MiscExtFunc, (bpp == 32) ? 0x1A : 0x12);
@@ -1056,7 +1035,7 @@ static int tridentfb_set_par(struct fb_info *info)
 
 	if (par->chip_id == CYBERBLADEXPAi1) {
 		/* This fixes snow-effect in 32 bpp */
-		write3X4(par, CRTHSyncStart, 0x84);
+		write3X4(par, VGA_CRTC_H_SYNC_START, 0x84);
 	}
 
 	/* graphics mode and support 256 color modes */
@@ -1067,8 +1046,8 @@ static int tridentfb_set_par(struct fb_info *info)
 	/* colors */
 	for (tmp = 0; tmp < 0x10; tmp++)
 		writeAttr(par, tmp, tmp);
-	fb_readb(par->io_virt + CRT + 0x0A);	/* flip-flop to index */
-	t_outb(par, 0x20, 0x3C0);		/* enable attr */
+	fb_readb(par->io_virt + VGA_IS1_RC);	/* flip-flop to index */
+	t_outb(par, 0x20, VGA_ATT_W);		/* enable attr */
 
 	switch (bpp) {
 	case 8:
@@ -1086,13 +1065,13 @@ static int tridentfb_set_par(struct fb_info *info)
 		break;
 	}
 
-	t_inb(par, 0x3C8);
-	t_inb(par, 0x3C6);
-	t_inb(par, 0x3C6);
-	t_inb(par, 0x3C6);
-	t_inb(par, 0x3C6);
-	t_outb(par, tmp, 0x3C6);
-	t_inb(par, 0x3C8);
+	t_inb(par, VGA_PEL_IW);
+	t_inb(par, VGA_PEL_MSK);
+	t_inb(par, VGA_PEL_MSK);
+	t_inb(par, VGA_PEL_MSK);
+	t_inb(par, VGA_PEL_MSK);
+	t_outb(par, tmp, VGA_PEL_MSK);
+	t_inb(par, VGA_PEL_IW);
 
 	if (par->flatpanel)
 		set_number_of_lines(par, info->var.yres);
@@ -1116,12 +1095,12 @@ static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 		return 1;
 
 	if (bpp == 8) {
-		t_outb(par, 0xFF, 0x3C6);
-		t_outb(par, regno, 0x3C8);
+		t_outb(par, 0xFF, VGA_PEL_MSK);
+		t_outb(par, regno, VGA_PEL_IW);
 
-		t_outb(par, red >> 10, 0x3C9);
-		t_outb(par, green >> 10, 0x3C9);
-		t_outb(par, blue >> 10, 0x3C9);
+		t_outb(par, red >> 10, VGA_PEL_D);
+		t_outb(par, green >> 10, VGA_PEL_D);
+		t_outb(par, blue >> 10, VGA_PEL_D);
 
 	} else if (regno < 16) {
 		if (bpp == 16) {	/* RGB 565 */
@@ -1232,8 +1211,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	/* If PCI id is 0x9660 then further detect chip type */
 
 	if (chip_id == TGUI9660) {
-		outb(RevisionID, 0x3C4);
-		revision = inb(0x3C5);
+		revision = vga_io_rseq(RevisionID);
 
 		switch (revision) {
 		case 0x22:
diff --git a/include/video/trident.h b/include/video/trident.h
index 9c3670b2890..51ec5a95d1a 100644
--- a/include/video/trident.h
+++ b/include/video/trident.h
@@ -63,33 +63,7 @@
 #define SKey 0x37
 #define SPKey 0x57
 
-/* 0x3x4 */
-#define CRTHTotal	0x00
-#define CRTHDispEnd	0x01
-#define CRTHBlankStart	0x02
-#define CRTHBlankEnd	0x03
-#define CRTHSyncStart	0x04
-#define CRTHSyncEnd	0x05
-
-#define CRTVTotal	0x06
-#define CRTVDispEnd	0x12
-#define CRTVBlankStart	0x15
-#define CRTVBlankEnd	0x16
-#define CRTVSyncStart	0x10
-#define CRTVSyncEnd	0x11
-
-#define CRTOverflow	0x07
-#define CRTPRowScan	0x08
-#define CRTMaxScanLine	0x09
-#define CRTModeControl	0x17
-#define CRTLineCompare	0x18
-
 /* 3x4 */
-#define StartAddrHigh 0x0C
-#define StartAddrLow 0x0D
-#define Offset 0x13
-#define Underline 0x14
-#define CRTCMode 0x17
 #define CRTCModuleTest 0x1E
 #define FIFOControl 0x20
 #define LinearAddReg 0x21
-- 
cgit v1.2.3


From 7f762d23e607af786bba8ff4a18059f43950c0e8 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:55 -0700
Subject: tridentfb: fix timing calculations

Fix broken timings calculations. This patch helps with following
problems:
 - no left part of screen visible (up to half of the screen)
 - monitor's frequencies are not the ones intended for selected modes
 - if mode with resoultion y > 1024 is selected at least once then
   all modes with y < 1024 are "out of sync" (no display)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 381e5853df6..af02af11353 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -886,20 +886,19 @@ static int tridentfb_set_par(struct fb_info *info)
 
 	debug("enter\n");
 	hdispend = var->xres / 8 - 1;
-	hsyncstart = (var->xres + var->right_margin) / 8;
-	hsyncend = var->hsync_len / 8;
-	htotal =
-		(var->xres + var->left_margin + var->right_margin +
-		 var->hsync_len) / 8 - 10;
-	hblankstart = hdispend + 1;
-	hblankend = htotal + 5;
+	hsyncstart = (var->xres + var->right_margin) / 8 - 1;
+	hsyncend = (var->xres + var->right_margin + var->hsync_len) / 8 - 1;
+	htotal = (var->xres + var->left_margin + var->right_margin +
+		  var->hsync_len) / 8 - 5;
+	hblankstart = hdispend + 2;
+	hblankend = htotal + 3;
 
 	vdispend = var->yres - 1;
 	vsyncstart = var->yres + var->lower_margin;
-	vsyncend = var->vsync_len;
-	vtotal = var->upper_margin + vsyncstart + vsyncend - 2;
-	vblankstart = var->yres;
-	vblankend = vtotal + 2;
+	vsyncend = vsyncstart + var->vsync_len;
+	vtotal = var->upper_margin + vsyncend - 2;
+	vblankstart = vdispend + 2;
+	vblankend = vtotal;
 
 	crtc_unlock(par);
 	write3CE(par, CyberControl, 8);
@@ -930,7 +929,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	write3X4(par, VGA_CRTC_V_SYNC_START, vsyncstart & 0xFF);
 	write3X4(par, VGA_CRTC_V_SYNC_END, (vsyncend & 0x0F));
 	write3X4(par, VGA_CRTC_V_BLANK_START, vblankstart & 0xFF);
-	write3X4(par, VGA_CRTC_V_BLANK_END, 0 /* p->vblankend & 0xFF */);
+	write3X4(par, VGA_CRTC_V_BLANK_END, vblankend & 0xFF);
 
 	/* horizontal timing values */
 	write3X4(par, VGA_CRTC_H_TOTAL, htotal & 0xFF);
@@ -939,7 +938,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	write3X4(par, VGA_CRTC_H_SYNC_END,
 		 (hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
 	write3X4(par, VGA_CRTC_H_BLANK_START, hblankstart & 0xFF);
-	write3X4(par, VGA_CRTC_H_BLANK_END, 0 /* (p->hblankend & 0x1F) */);
+	write3X4(par, VGA_CRTC_H_BLANK_END, hblankend & 0x1F);
 
 	/* higher bits of vertical timing values */
 	tmp = 0x10;
@@ -953,16 +952,18 @@ static int tridentfb_set_par(struct fb_info *info)
 	if (vsyncstart & 0x200) tmp |= 0x80;
 	write3X4(par, VGA_CRTC_OVERFLOW, tmp);
 
-	tmp = read3X4(par, CRTHiOrd) | 0x08;	/* line compare bit 10 */
+	tmp = read3X4(par, CRTHiOrd) & 0x07;
+	tmp |= 0x08;	/* line compare bit 10 */
 	if (vtotal & 0x400) tmp |= 0x80;
 	if (vblankstart & 0x400) tmp |= 0x40;
 	if (vsyncstart & 0x400) tmp |= 0x20;
 	if (vdispend & 0x400) tmp |= 0x10;
 	write3X4(par, CRTHiOrd, tmp);
 
-	tmp = 0;
-	if (htotal & 0x800) tmp |= 0x800 >> 11;
-	if (hblankstart & 0x800) tmp |= 0x800 >> 7;
+	tmp = (htotal >> 8) & 0x01;
+	tmp |= (hdispend >> 7) & 0x02;
+	tmp |= (hsyncstart >> 5) & 0x08;
+	tmp |= (hblankstart >> 4) & 0x10;
 	write3X4(par, HorizOverflow, tmp);
 
 	tmp = 0x40;
-- 
cgit v1.2.3


From c1724fecabfed504a4cfb87319ad3b9d3a8baa92 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:56 -0700
Subject: tridentfb: use mmio access for clock setting

Use the mmio outb function instead of direct one.  The mmio registers are
already mapped (in the probe function).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index af02af11353..f3153a82f92 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -680,8 +680,8 @@ static void set_vclk(struct tridentfb_par *par, unsigned long freq)
 		vga_mm_wseq(par->io_virt, ClockHigh, hi);
 		vga_mm_wseq(par->io_virt, ClockLow, lo);
 	} else {
-		outb(lo, 0x43C8);
-		outb(hi, 0x43C9);
+		t_outb(par, lo, 0x43C8);
+		t_outb(par, hi, 0x43C9);
 	}
 	debug("VCLK = %X %X\n", hi, lo);
 }
-- 
cgit v1.2.3


From 6bdf1035602abf0564d24a7447eea1c149c4bcb1 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:56 -0700
Subject: tridentfb: fix clock settings for older Trident 96XX chips

The Xorg code shows that Trident models 9660, 9680 and 9682 require a
different clock setting method.  Add the second clock setting method for older
models.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index f3153a82f92..8ee4261abf3 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -85,6 +85,11 @@ MODULE_PARM_DESC(fp, "Define if flatpanel is connected");
 module_param(crt, int, 0);
 MODULE_PARM_DESC(crt, "Define if CRT is connected");
 
+static int is_oldclock(int id)
+{
+	return (id == TGUI9660);
+}
+
 static int is_blade(int id)
 {
 	return	(id == BLADE3D) ||
@@ -659,23 +664,33 @@ static void set_screen_start(struct tridentfb_par *par, int base)
 static void set_vclk(struct tridentfb_par *par, unsigned long freq)
 {
 	int m, n, k;
-	unsigned long f, fi, d, di;
-	unsigned char lo = 0, hi = 0;
+	unsigned long fi, d, di;
+	unsigned char best_m = 0, best_n = 0, best_k = 0;
+	unsigned char hi, lo;
 
 	d = 20000;
-	for (k = 2; k >= 0; k--)
-		for (m = 0; m < 63; m++)
-			for (n = 0; n < 128; n++) {
+	for (k = 1; k >= 0; k--)
+		for (m = 0; m < 32; m++)
+			for (n = 0; n < 122; n++) {
 				fi = ((14318l * (n + 8)) / (m + 2)) >> k;
 				if ((di = abs(fi - freq)) < d) {
 					d = di;
-					f = fi;
-					lo = n;
-					hi = (k << 6) | m;
+					best_n = n;
+					best_m = m;
+					best_k = k;
 				}
 				if (fi > freq)
 					break;
 			}
+
+	if (is_oldclock(par->chip_id)) {
+		lo = best_n | (best_m << 7);
+		hi = (best_m >> 1) | (best_k << 4);
+	} else {
+		lo = best_n;
+		hi = best_m | (best_k << 6);
+	}
+
 	if (is3Dchip(par->chip_id)) {
 		vga_mm_wseq(par->io_virt, ClockHigh, hi);
 		vga_mm_wseq(par->io_virt, ClockLow, lo);
-- 
cgit v1.2.3


From 3876ae8beb2c7c19e21279b9603b1244fcd744dd Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:57 -0700
Subject: tridentfb: improve probe function

Add missing release of allocated fb_info structure and move enable_mmio() to
fix error path.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 8ee4261abf3..e79788a778f 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -1287,6 +1287,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 
 	if (!request_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len, "tridentfb")) {
 		debug("request_region failed!\n");
+		framebuffer_release(info);
 		return -1;
 	}
 
@@ -1299,8 +1300,6 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		goto out_unmap1;
 	}
 
-	enable_mmio();
-
 	/* setup framebuffer memory */
 	tridentfb_fix.smem_start = pci_resource_start(dev, 0);
 	tridentfb_fix.smem_len = get_memsize(default_par);
@@ -1312,6 +1311,8 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		goto out_unmap1;
 	}
 
+	enable_mmio();
+
 	info->screen_base = ioremap_nocache(tridentfb_fix.smem_start,
 					    tridentfb_fix.smem_len);
 
-- 
cgit v1.2.3


From 0e73a47f094a919e2edeaa88e840cd0400adc423 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:58 -0700
Subject: tridentfb: improved register values on TGUI 9680

Improved values for some registers after Xorg Trident driver.  The main
problem was that values set by BIOS have been ignored.

This patch completely remove random pixels ("snow") on the TGUI 9680 and
9440 (not supported yet by the driver).  It does not help with the "snow"
on 3DImage and Blade3D cards.

There is also small improvement in timing calculations (hblank start and
vblank start)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 29 +++++++++++++++++++++++------
 include/video/trident.h   |  1 +
 2 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index e79788a778f..9668be881fe 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -87,7 +87,17 @@ MODULE_PARM_DESC(crt, "Define if CRT is connected");
 
 static int is_oldclock(int id)
 {
-	return (id == TGUI9660);
+	return	(id == TGUI9660) ||
+		(id == CYBER9320);
+}
+
+static int is_oldprotect(int id)
+{
+	return	(id == TGUI9660) ||
+		(id == PROVIDIA9685) ||
+		(id == CYBER9320) ||
+		(id == CYBER9382) ||
+		(id == CYBER9385);
 }
 
 static int is_blade(int id)
@@ -143,6 +153,7 @@ static int iscyber(int id)
 
 	case CYBER9320:
 	case TGUI9660:
+	case PROVIDIA9685:
 	case IMAGE975:
 	case IMAGE985:
 	case BLADE3D:
@@ -905,14 +916,14 @@ static int tridentfb_set_par(struct fb_info *info)
 	hsyncend = (var->xres + var->right_margin + var->hsync_len) / 8 - 1;
 	htotal = (var->xres + var->left_margin + var->right_margin +
 		  var->hsync_len) / 8 - 5;
-	hblankstart = hdispend + 2;
+	hblankstart = hdispend + 1;
 	hblankend = htotal + 3;
 
 	vdispend = var->yres - 1;
 	vsyncstart = var->yres + var->lower_margin;
 	vsyncend = vsyncstart + var->vsync_len;
 	vtotal = var->upper_margin + vsyncend - 2;
-	vblankstart = vdispend + 2;
+	vblankstart = vdispend + 1;
 	vblankend = vtotal;
 
 	crtc_unlock(par);
@@ -1020,15 +1031,18 @@ static int tridentfb_set_par(struct fb_info *info)
 
 	write3X4(par, PixelBusReg, tmp);
 
-	tmp = 0x10;
+	tmp = read3X4(par, DRAMControl);
+	if (!is_oldprotect(par->chip_id))
+		tmp |= 0x10;
 	if (iscyber(par->chip_id))
 		tmp |= 0x20;
 	write3X4(par, DRAMControl, tmp);	/* both IO, linear enable */
 
 	write3X4(par, InterfaceSel, read3X4(par, InterfaceSel) | 0x40);
-	write3X4(par, Performance, 0x92);
+	if (!is_xp(par->chip_id))
+		write3X4(par, Performance, read3X4(par, Performance) | 0x10);
 	/* MMIO & PCI read and write burst enable */
-	write3X4(par, PCIReg, 0x07);
+	write3X4(par, PCIReg, read3X4(par, PCIReg) | 0x06);
 
 	/* convert from picoseconds to kHz */
 	vclk = PICOS2KHZ(info->var.pixclock);
@@ -1230,6 +1244,9 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		revision = vga_io_rseq(RevisionID);
 
 		switch (revision) {
+		case 0x21:
+			chip_id = PROVIDIA9685;
+			break;
 		case 0x22:
 		case 0x23:
 			chip_id = CYBER9397;
diff --git a/include/video/trident.h b/include/video/trident.h
index 51ec5a95d1a..fa690b9fcc1 100644
--- a/include/video/trident.h
+++ b/include/video/trident.h
@@ -25,6 +25,7 @@
 #define CYBER9520	0x9520
 #define CYBER9525DVD	0x9525
 #define TGUI9660	0x9660
+#define PROVIDIA9685	0x9685
 #define IMAGE975	0x9750
 #define IMAGE985	0x9850
 #define BLADE3D		0x9880
-- 
cgit v1.2.3


From a0d922562d56073f147a4de2983bee499dd2a10e Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:58 -0700
Subject: tridentfb: add TGUI 9440 support

Add support for TGUI 9440 chip.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 10 +++++++---
 include/video/trident.h   |  1 +
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 9668be881fe..9dedc1a5e42 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -87,13 +87,15 @@ MODULE_PARM_DESC(crt, "Define if CRT is connected");
 
 static int is_oldclock(int id)
 {
-	return	(id == TGUI9660) ||
+	return	(id == TGUI9440) ||
+		(id == TGUI9660) ||
 		(id == CYBER9320);
 }
 
 static int is_oldprotect(int id)
 {
-	return	(id == TGUI9660) ||
+	return	(id == TGUI9440) ||
+		(id == TGUI9660) ||
 		(id == PROVIDIA9685) ||
 		(id == CYBER9320) ||
 		(id == CYBER9382) ||
@@ -1042,7 +1044,8 @@ static int tridentfb_set_par(struct fb_info *info)
 	if (!is_xp(par->chip_id))
 		write3X4(par, Performance, read3X4(par, Performance) | 0x10);
 	/* MMIO & PCI read and write burst enable */
-	write3X4(par, PCIReg, read3X4(par, PCIReg) | 0x06);
+	if (par->chip_id != TGUI9440)
+		write3X4(par, PCIReg, read3X4(par, PCIReg) | 0x06);
 
 	/* convert from picoseconds to kHz */
 	vclk = PICOS2KHZ(info->var.pixclock);
@@ -1418,6 +1421,7 @@ static struct pci_device_id trident_devices[] = {
 	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEAi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEAi1D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_TRIDENT,	CYBERBLADEE4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_VENDOR_ID_TRIDENT,	TGUI9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_TRIDENT,	TGUI9660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_TRIDENT,	IMAGE975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_TRIDENT,	IMAGE985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
diff --git a/include/video/trident.h b/include/video/trident.h
index fa690b9fcc1..76d81b2198d 100644
--- a/include/video/trident.h
+++ b/include/video/trident.h
@@ -24,6 +24,7 @@
 #define CYBER9397DVD	0x939A
 #define CYBER9520	0x9520
 #define CYBER9525DVD	0x9525
+#define TGUI9440	0x9440
 #define TGUI9660	0x9660
 #define PROVIDIA9685	0x9685
 #define IMAGE975	0x9750
-- 
cgit v1.2.3


From aa0aa8ab2f28d8985daa79ecab51970376e17157 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:30:59 -0700
Subject: tridentfb: fix unitialized pseudo_palette

Initialize the pseudo_palette pointer properly.  This fixes crash when
16bpp or 32bpp mode is selected.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 9dedc1a5e42..6b3bb1e2073 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -1350,7 +1350,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 
 	info->fix = tridentfb_fix;
 	info->fbops = &tridentfb_ops;
-
+	info->pseudo_palette = default_par->pseudo_pal;
 
 	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
 #ifdef CONFIG_FB_TRIDENT_ACCEL
-- 
cgit v1.2.3


From 74a933feaf13f705e6c798d87efe6a9d758b3ca0 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:00 -0700
Subject: tridentfb: improve check_var function

Do some additional checks (like pixelclock versus ramdac speed) to
eliminate modes which do not work.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 6b3bb1e2073..62701c5570f 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -829,6 +829,7 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 {
 	struct tridentfb_par *par = info->par;
 	int bpp = var->bits_per_pixel;
+	int ramdac = 230000; /* 230MHz for most 3D chips */
 	debug("enter\n");
 
 	/* check color depth */
@@ -837,6 +838,12 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 	/* check whether resolution fits on panel and in memory */
 	if (par->flatpanel && nativex && var->xres > nativex)
 		return -EINVAL;
+	/* various resolution checks */
+	var->xres = (var->xres + 7) & ~0x7;
+	if (var->xres != var->xres_virtual)
+		var->xres_virtual = var->xres;
+	if (var->yres > var->yres_virtual)
+		var->yres_virtual = var->yres;
 	if (var->xres * var->yres_virtual * bpp / 8 > info->fix.smem_len)
 		return -EINVAL;
 
@@ -868,6 +875,33 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 	default:
 		return -EINVAL;
 	}
+
+	if (is_xp(par->chip_id))
+		ramdac = 350000;
+
+	switch (par->chip_id) {
+	case TGUI9440:
+		ramdac = 90000;
+		break;
+	case CYBER9320:
+	case TGUI9660:
+		ramdac = 135000;
+		break;
+	case PROVIDIA9685:
+	case CYBER9388:
+	case CYBER9382:
+	case CYBER9385:
+		ramdac = 170000;
+		break;
+	}
+
+	/* The clock is doubled for 32 bpp */
+	if (bpp == 32)
+		ramdac /= 2;
+
+	if (PICOS2KHZ(var->pixclock) > ramdac)
+		return -EINVAL;
+
 	debug("exit\n");
 
 	return 0;
-- 
cgit v1.2.3


From 65e93e038c8a6eb65b6907d6aed22a8ff1029d3a Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:00 -0700
Subject: tridentfb: preserve memory type settings

Do not overwrite bits which contain memory type settings.  It removes
noise pixels ("snow") on Blade3D and 3DImage chips.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 62701c5570f..26bc4d75d4f 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -1095,7 +1095,10 @@ static int tridentfb_set_par(struct fb_info *info)
 	vga_mm_wseq(par->io_virt, 4, 0x0E); /* memory mode enable bitmaps ?? */
 
 	/* divide clock by 2 if 32bpp chain4 mode display and CPU path */
-	write3CE(par, MiscExtFunc, (bpp == 32) ? 0x1A : 0x12);
+	tmp = read3CE(par, MiscExtFunc) & 0xF0;
+	if (bpp == 32)
+		tmp |= 8;
+	write3CE(par, MiscExtFunc, tmp | 0x12);
 	write3CE(par, 0x5, 0x40);	/* no CGA compat, allow 256 col */
 	write3CE(par, 0x6, 0x05);	/* graphics mode */
 	write3CE(par, 0x7, 0x0F);	/* planes? */
-- 
cgit v1.2.3


From 54f019e54244fef0ad927ce5501927d9033492de Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:01 -0700
Subject: tridentfb: fix hi-color modes for TGUI 9440

The TGUI 9440 requires doubling clock for 16bpp (hi-color) modes.

The patch also moves back enable_mmio() call to the right position.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 26bc4d75d4f..ed1b32a1cef 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -835,6 +835,8 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 	/* check color depth */
 	if (bpp == 24)
 		bpp = var->bits_per_pixel = 32;
+	if (par->chip_id == TGUI9440 && bpp == 32)
+		return -EINVAL;
 	/* check whether resolution fits on panel and in memory */
 	if (par->flatpanel && nativex && var->xres > nativex)
 		return -EINVAL;
@@ -881,7 +883,7 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 
 	switch (par->chip_id) {
 	case TGUI9440:
-		ramdac = 90000;
+		ramdac = (bpp >= 16) ? 45000 : 90000;
 		break;
 	case CYBER9320:
 	case TGUI9660:
@@ -1081,12 +1083,6 @@ static int tridentfb_set_par(struct fb_info *info)
 	if (par->chip_id != TGUI9440)
 		write3X4(par, PCIReg, read3X4(par, PCIReg) | 0x06);
 
-	/* convert from picoseconds to kHz */
-	vclk = PICOS2KHZ(info->var.pixclock);
-	if (bpp == 32)
-		vclk *= 2;
-	set_vclk(par, vclk);
-
 	vga_mm_wseq(par->io_virt, 0, 3);
 	vga_mm_wseq(par->io_virt, 1, 1); /* set char clock 8 dots wide */
 	/* enable 4 maps because needed in chain4 mode */
@@ -1094,10 +1090,16 @@ static int tridentfb_set_par(struct fb_info *info)
 	vga_mm_wseq(par->io_virt, 3, 0);
 	vga_mm_wseq(par->io_virt, 4, 0x0E); /* memory mode enable bitmaps ?? */
 
+	/* convert from picoseconds to kHz */
+	vclk = PICOS2KHZ(info->var.pixclock);
+
 	/* divide clock by 2 if 32bpp chain4 mode display and CPU path */
 	tmp = read3CE(par, MiscExtFunc) & 0xF0;
-	if (bpp == 32)
+	if (bpp == 32 || (par->chip_id == TGUI9440 && bpp == 16)) {
 		tmp |= 8;
+		vclk *= 2;
+	}
+	set_vclk(par, vclk);
 	write3CE(par, MiscExtFunc, tmp | 0x12);
 	write3CE(par, 0x5, 0x40);	/* no CGA compat, allow 256 col */
 	write3CE(par, 0x6, 0x05);	/* graphics mode */
@@ -1361,6 +1363,8 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	tridentfb_fix.smem_start = pci_resource_start(dev, 0);
 	tridentfb_fix.smem_len = get_memsize(default_par);
 
+	enable_mmio();
+
 	if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
 		debug("request_mem_region failed!\n");
 		disable_mmio(info->par);
@@ -1368,8 +1372,6 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		goto out_unmap1;
 	}
 
-	enable_mmio();
-
 	info->screen_base = ioremap_nocache(tridentfb_fix.smem_start,
 					    tridentfb_fix.smem_len);
 
-- 
cgit v1.2.3


From bcac2d5fe36238dcfc955b49f9db10ad3ae3e53c Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:01 -0700
Subject: tridentfb: add acceleration for TGUI families

This patch adds acceleration for TGUI 9440 and 96xx chips.  These chips
requires line length to be power of 2, so this is also changed.

It also moves the troubling enable_mmio() function to its final
destination.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 135 +++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 123 insertions(+), 12 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index ed1b32a1cef..9b87c08e517 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -491,6 +491,95 @@ static void image_copy_rect(struct tridentfb_par *par,
 		 0x80000000 | 1 << 22 | 1 << 10 | 1 << 7 | direction);
 }
 
+/*
+ * TGUI 9440/96XX acceleration
+ */
+
+static void tgui_init_accel(struct tridentfb_par *par, int pitch, int bpp)
+{
+	unsigned char x = 0;
+
+	/* disable clipping */
+	writemmr(par, 0x2148, 0);
+	writemmr(par, 0x214C, point(4095, 2047));
+
+	switch (bpp) {
+	case 8:
+		x = 0;
+		break;
+	case 16:
+		x = 1;
+		break;
+	case 24:
+		x = 3;
+		break;
+	case 32:
+		x = 2;
+		break;
+	}
+
+	switch ((pitch * bpp) / 8) {
+	case 8192:
+	case 512:
+		x |= 0x00;
+		break;
+	case 1024:
+		x |= 0x04;
+		break;
+	case 2048:
+		x |= 0x08;
+		break;
+	case 4096:
+		x |= 0x0C;
+		break;
+	}
+
+	fb_writew(x, par->io_virt + 0x2122);
+}
+
+static void tgui_fill_rect(struct tridentfb_par *par,
+			   u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
+{
+	t_outb(par, ROP_P, 0x2127);
+	writemmr(par, 0x212c, c);
+	writemmr(par, 0x2128, 0x4020);
+	writemmr(par, 0x2140, point(w - 1, h - 1));
+	writemmr(par, 0x2138, point(x, y));
+	t_outb(par, 1, 0x2124);
+}
+
+static void tgui_copy_rect(struct tridentfb_par *par,
+			   u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
+{
+	int flags = 0;
+	u16 x1_tmp, x2_tmp, y1_tmp, y2_tmp;
+
+	if ((x1 < x2) && (y1 == y2)) {
+		flags |= 0x0200;
+		x1_tmp = x1 + w - 1;
+		x2_tmp = x2 + w - 1;
+	} else {
+		x1_tmp = x1;
+		x2_tmp = x2;
+	}
+
+	if (y1 < y2) {
+		flags |= 0x0100;
+		y1_tmp = y1 + h - 1;
+		y2_tmp = y2 + h - 1;
+	} else {
+		y1_tmp = y1;
+		y2_tmp = y2;
+	}
+
+	writemmr(par, 0x2128, 0x4 | flags);
+	t_outb(par, ROP_S, 0x2127);
+	writemmr(par, 0x213C, point(x1_tmp, y1_tmp));
+	writemmr(par, 0x2138, point(x2_tmp, y2_tmp));
+	writemmr(par, 0x2140, point(w - 1, h - 1));
+	t_outb(par, 1, 0x2124);
+}
+
 /*
  * Accel functions called by the upper layers
  */
@@ -530,12 +619,8 @@ static void tridentfb_copyarea(struct fb_info *info,
 		       ca->width, ca->height);
 	par->wait_engine(par);
 }
-#else /* !CONFIG_FB_TRIDENT_ACCEL */
-#define tridentfb_fillrect cfb_fillrect
-#define tridentfb_copyarea cfb_copyarea
 #endif /* CONFIG_FB_TRIDENT_ACCEL */
 
-
 /*
  * Hardware access functions
  */
@@ -829,6 +914,7 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 {
 	struct tridentfb_par *par = info->par;
 	int bpp = var->bits_per_pixel;
+	int line_length;
 	int ramdac = 230000; /* 230MHz for most 3D chips */
 	debug("enter\n");
 
@@ -844,9 +930,27 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 	var->xres = (var->xres + 7) & ~0x7;
 	if (var->xres != var->xres_virtual)
 		var->xres_virtual = var->xres;
+	line_length = var->xres_virtual * bpp / 8;
+#ifdef CONFIG_FB_TRIDENT_ACCEL
+	if (!is3Dchip(par->chip_id)) {
+		/* acceleration requires line length to be power of 2 */
+		if (line_length <= 512)
+			var->xres_virtual = 512 * 8 / bpp;
+		else if (line_length <= 1024)
+			var->xres_virtual = 1024 * 8 / bpp;
+		else if (line_length <= 2048)
+			var->xres_virtual = 2048 * 8 / bpp;
+		else if (line_length <= 4096)
+			var->xres_virtual = 4096 * 8 / bpp;
+		else if (line_length <= 8192)
+			var->xres_virtual = 8192 * 8 / bpp;
+
+		line_length = var->xres_virtual * bpp / 8;
+	}
+#endif
 	if (var->yres > var->yres_virtual)
 		var->yres_virtual = var->yres;
-	if (var->xres * var->yres_virtual * bpp / 8 > info->fix.smem_len)
+	if (line_length * var->yres_virtual > info->fix.smem_len)
 		return -EINVAL;
 
 	switch (bpp) {
@@ -918,7 +1022,7 @@ static int tridentfb_pan_display(struct fb_var_screeninfo *var,
 	unsigned int offset;
 
 	debug("enter\n");
-	offset = (var->xoffset + (var->yoffset * var->xres))
+	offset = (var->xoffset + (var->yoffset * var->xres_virtual))
 		* var->bits_per_pixel / 32;
 	info->var.xoffset = var->xoffset;
 	info->var.yoffset = var->yoffset;
@@ -1049,7 +1153,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	write3X4(par, GraphEngReg, 0x80);
 
 #ifdef CONFIG_FB_TRIDENT_ACCEL
-	par->init_accel(par, info->var.xres, bpp);
+	par->init_accel(par, info->var.xres_virtual, bpp);
 #endif
 
 	switch (bpp) {
@@ -1147,9 +1251,9 @@ static int tridentfb_set_par(struct fb_info *info)
 
 	if (par->flatpanel)
 		set_number_of_lines(par, info->var.yres);
-	set_lwidth(par, info->var.xres * bpp / (4 * 16));
+	info->fix.line_length = info->var.xres_virtual * bpp / 8;
+	set_lwidth(par, info->fix.line_length / 8);
 	info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
-	info->fix.line_length = info->var.xres * (bpp >> 3);
 	info->cmap.len = (bpp == 8) ? 256 : 16;
 	debug("exit\n");
 	return 0;
@@ -1248,9 +1352,11 @@ static struct fb_ops tridentfb_ops = {
 	.fb_blank = tridentfb_blank,
 	.fb_check_var = tridentfb_check_var,
 	.fb_set_par = tridentfb_set_par,
+#ifdef CONFIG_FB_TRIDENT_ACCEL
 	.fb_fillrect = tridentfb_fillrect,
 	.fb_copyarea = tridentfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
+#endif
 };
 
 static int __devinit trident_pci_probe(struct pci_dev *dev,
@@ -1328,11 +1434,16 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		default_par->wait_engine = blade_wait_engine;
 		default_par->fill_rect = blade_fill_rect;
 		default_par->copy_rect = blade_copy_rect;
-	} else {
+	} else if (chip3D) {			/* 3DImage family left */
 		default_par->init_accel = image_init_accel;
 		default_par->wait_engine = image_wait_engine;
 		default_par->fill_rect = image_fill_rect;
 		default_par->copy_rect = image_copy_rect;
+	} else { 				/* TGUI 9440/96XX family */
+		default_par->init_accel = tgui_init_accel;
+		default_par->wait_engine = xp_wait_engine;
+		default_par->fill_rect = tgui_fill_rect;
+		default_par->copy_rect = tgui_copy_rect;
 	}
 
 	default_par->chip_id = chip_id;
@@ -1359,12 +1470,12 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		goto out_unmap1;
 	}
 
+	enable_mmio();
+
 	/* setup framebuffer memory */
 	tridentfb_fix.smem_start = pci_resource_start(dev, 0);
 	tridentfb_fix.smem_len = get_memsize(default_par);
 
-	enable_mmio();
-
 	if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
 		debug("request_mem_region failed!\n");
 		disable_mmio(info->par);
-- 
cgit v1.2.3


From 49b1f4b44bcdc47a10d2b354b269305043ef2a32 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:02 -0700
Subject: tridentfb: acceleration code improvements

This patch brings various acceleration improvements:
- set  copyarea/fillrect for non-accelerated framebuffer (fix)
- remove 15 bpp depth handling to simplify code as it hardly
  works (15 bpp handling was obviously missing in some switches)
- add fb_sync call and move waiting before accelerated function
  to make acceleration more asynchronous to cpu (few % of speed
  improvement)
- add cpu_relax() call in waiting loops
- make longer register names and name more registers
- move registers' definition to header
- general code improvements (shortening, simplifying)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 261 ++++++++++++++++------------------------------
 include/video/trident.h   |  21 +++-
 2 files changed, 109 insertions(+), 173 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 9b87c08e517..4a1258f9509 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -1,5 +1,5 @@
 /*
- * Frame buffer driver for Trident Blade and Image series
+ * Frame buffer driver for Trident TGUI, Blade and Image series
  *
  * Copyright 2001, 2002 - Jani Monoses   <jani@iv.ro>
  *
@@ -13,7 +13,6 @@
  *	code, suggestions
  * TODO:
  *	timing value tweaking so it looks good on every monitor in every mode
- *	TGUI acceleration
  */
 
 #include <linux/module.h>
@@ -193,37 +192,13 @@ static inline u32 readmmr(struct tridentfb_par *par, u16 r)
  */
 
 #define point(x, y) ((y) << 16 | (x))
-#define STA	0x2120
-#define CMD	0x2144
-#define ROP	0x2148
-#define CLR	0x2160
-#define SR1	0x2100
-#define SR2	0x2104
-#define DR1	0x2108
-#define DR2	0x210C
-
-#define ROP_S	0xCC
 
 static void blade_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 {
 	int v1 = (pitch >> 3) << 20;
-	int tmp = 0, v2;
-	switch (bpp) {
-	case 8:
-		tmp = 0;
-		break;
-	case 15:
-		tmp = 5;
-		break;
-	case 16:
-		tmp = 1;
-		break;
-	case 24:
-	case 32:
-		tmp = 2;
-		break;
-	}
-	v2 = v1 | (tmp << 29);
+	int tmp = bpp == 24 ? 2 : (bpp >> 4);
+	int v2 = v1 | (tmp << 29);
+
 	writemmr(par, 0x21C0, v2);
 	writemmr(par, 0x21C4, v2);
 	writemmr(par, 0x21B8, v2);
@@ -237,29 +212,29 @@ static void blade_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 
 static void blade_wait_engine(struct tridentfb_par *par)
 {
-	while (readmmr(par, STA) & 0xFA800000) ;
+	while (readmmr(par, STATUS) & 0xFA800000)
+		cpu_relax();
 }
 
 static void blade_fill_rect(struct tridentfb_par *par,
 			    u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
 {
-	writemmr(par, CLR, c);
-	writemmr(par, ROP, rop ? 0x66 : ROP_S);
+	writemmr(par, COLOR, c);
+	writemmr(par, ROP, rop ? ROP_X : ROP_S);
 	writemmr(par, CMD, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2);
 
-	writemmr(par, DR1, point(x, y));
-	writemmr(par, DR2, point(x + w - 1, y + h - 1));
+	writemmr(par, DST1, point(x, y));
+	writemmr(par, DST2, point(x + w - 1, y + h - 1));
 }
 
 static void blade_copy_rect(struct tridentfb_par *par,
 			    u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 {
-	u32 s1, s2, d1, d2;
 	int direction = 2;
-	s1 = point(x1, y1);
-	s2 = point(x1 + w - 1, y1 + h - 1);
-	d1 = point(x2, y2);
-	d2 = point(x2 + w - 1, y2 + h - 1);
+	u32 s1 = point(x1, y1);
+	u32 s2 = point(x1 + w - 1, y1 + h - 1);
+	u32 d1 = point(x2, y2);
+	u32 d2 = point(x2 + w - 1, y2 + h - 1);
 
 	if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
 		direction = 0;
@@ -267,38 +242,20 @@ static void blade_copy_rect(struct tridentfb_par *par,
 	writemmr(par, ROP, ROP_S);
 	writemmr(par, CMD, 0xE0000000 | 1 << 19 | 1 << 4 | 1 << 2 | direction);
 
-	writemmr(par, SR1, direction ? s2 : s1);
-	writemmr(par, SR2, direction ? s1 : s2);
-	writemmr(par, DR1, direction ? d2 : d1);
-	writemmr(par, DR2, direction ? d1 : d2);
+	writemmr(par, SRC1, direction ? s2 : s1);
+	writemmr(par, SRC2, direction ? s1 : s2);
+	writemmr(par, DST1, direction ? d2 : d1);
+	writemmr(par, DST2, direction ? d1 : d2);
 }
 
 /*
  * BladeXP specific acceleration functions
  */
 
-#define ROP_P 0xF0
-#define masked_point(x, y) ((y & 0xffff)<<16|(x & 0xffff))
-
 static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 {
-	int tmp = 0, v1;
-	unsigned char x = 0;
-
-	switch (bpp) {
-	case 8:
-		x = 0;
-		break;
-	case 16:
-		x = 1;
-		break;
-	case 24:
-		x = 3;
-		break;
-	case 32:
-		x = 2;
-		break;
-	}
+	unsigned char x = bpp == 24 ? 3 : (bpp >> 4);
+	int v1 = pitch << (bpp == 24 ? 20 : (18 + x));
 
 	switch (pitch << (bpp >> 3)) {
 	case 8192:
@@ -320,22 +277,6 @@ static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 
 	eng_oper = x | 0x40;
 
-	switch (bpp) {
-	case 8:
-		tmp = 18;
-		break;
-	case 15:
-	case 16:
-		tmp = 19;
-		break;
-	case 24:
-	case 32:
-		tmp = 20;
-		break;
-	}
-
-	v1 = pitch << tmp;
-
 	writemmr(par, 0x2154, v1);
 	writemmr(par, 0x2150, v1);
 	t_outb(par, 3, 0x2126);
@@ -343,15 +284,11 @@ static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 
 static void xp_wait_engine(struct tridentfb_par *par)
 {
-	int busy;
 	int count, timeout;
 
 	count = 0;
 	timeout = 0;
-	for (;;) {
-		busy = t_inb(par, STA) & 0x80;
-		if (busy != 0x80)
-			return;
+	while (t_inb(par, STATUS) & 0x80) {
 		count++;
 		if (count == 10000000) {
 			/* Timeout */
@@ -359,10 +296,11 @@ static void xp_wait_engine(struct tridentfb_par *par)
 			timeout++;
 			if (timeout == 8) {
 				/* Reset engine */
-				t_outb(par, 0x00, 0x2120);
+				t_outb(par, 0x00, STATUS);
 				return;
 			}
 		}
+		cpu_relax();
 	}
 }
 
@@ -371,10 +309,10 @@ static void xp_fill_rect(struct tridentfb_par *par,
 {
 	writemmr(par, 0x2127, ROP_P);
 	writemmr(par, 0x2158, c);
-	writemmr(par, 0x2128, 0x4000);
-	writemmr(par, 0x2140, masked_point(h, w));
-	writemmr(par, 0x2138, masked_point(y, x));
-	t_outb(par, 0x01, 0x2124);
+	writemmr(par, DRAWFL, 0x4000);
+	writemmr(par, OLDDIM, point(h, w));
+	writemmr(par, OLDDST, point(y, x));
+	t_outb(par, 0x01, OLDCMD);
 	t_outb(par, eng_oper, 0x2125);
 }
 
@@ -404,12 +342,12 @@ static void xp_copy_rect(struct tridentfb_par *par,
 		y2_tmp = y2;
 	}
 
-	writemmr(par, 0x2128, direction);
+	writemmr(par, DRAWFL, direction);
 	t_outb(par, ROP_S, 0x2127);
-	writemmr(par, 0x213C, masked_point(y1_tmp, x1_tmp));
-	writemmr(par, 0x2138, masked_point(y2_tmp, x2_tmp));
-	writemmr(par, 0x2140, masked_point(h, w));
-	t_outb(par, 0x01, 0x2124);
+	writemmr(par, OLDSRC, point(y1_tmp, x1_tmp));
+	writemmr(par, OLDDST, point(y2_tmp, x2_tmp));
+	writemmr(par, OLDDIM, point(h, w));
+	t_outb(par, 0x01, OLDCMD);
 }
 
 /*
@@ -417,22 +355,8 @@ static void xp_copy_rect(struct tridentfb_par *par,
  */
 static void image_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 {
-	int tmp = 0;
-	switch (bpp) {
-	case 8:
-		tmp = 0;
-		break;
-	case 15:
-		tmp = 5;
-		break;
-	case 16:
-		tmp = 1;
-		break;
-	case 24:
-	case 32:
-		tmp = 2;
-		break;
-	}
+	int tmp = bpp == 24 ? 2: (bpp >> 4);
+
 	writemmr(par, 0x2120, 0xF0000000);
 	writemmr(par, 0x2120, 0x40000000 | tmp);
 	writemmr(par, 0x2120, 0x80000000);
@@ -450,7 +374,8 @@ static void image_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 
 static void image_wait_engine(struct tridentfb_par *par)
 {
-	while (readmmr(par, 0x2164) & 0xF0000000) ;
+	while (readmmr(par, 0x2164) & 0xF0000000)
+		cpu_relax();
 }
 
 static void image_fill_rect(struct tridentfb_par *par,
@@ -461,8 +386,8 @@ static void image_fill_rect(struct tridentfb_par *par,
 
 	writemmr(par, 0x2144, c);
 
-	writemmr(par, DR1, point(x, y));
-	writemmr(par, DR2, point(x + w - 1, y + h - 1));
+	writemmr(par, DST1, point(x, y));
+	writemmr(par, DST2, point(x + w - 1, y + h - 1));
 
 	writemmr(par, 0x2124, 0x80000000 | 3 << 22 | 1 << 10 | 1 << 9);
 }
@@ -470,12 +395,11 @@ static void image_fill_rect(struct tridentfb_par *par,
 static void image_copy_rect(struct tridentfb_par *par,
 			    u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 {
-	u32 s1, s2, d1, d2;
 	int direction = 2;
-	s1 = point(x1, y1);
-	s2 = point(x1 + w - 1, y1 + h - 1);
-	d1 = point(x2, y2);
-	d2 = point(x2 + w - 1, y2 + h - 1);
+	u32 s1 = point(x1, y1);
+	u32 s2 = point(x1 + w - 1, y1 + h - 1);
+	u32 d1 = point(x2, y2);
+	u32 d2 = point(x2 + w - 1, y2 + h - 1);
 
 	if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
 		direction = 0;
@@ -483,10 +407,10 @@ static void image_copy_rect(struct tridentfb_par *par,
 	writemmr(par, 0x2120, 0x80000000);
 	writemmr(par, 0x2120, 0x90000000 | ROP_S);
 
-	writemmr(par, SR1, direction ? s2 : s1);
-	writemmr(par, SR2, direction ? s1 : s2);
-	writemmr(par, DR1, direction ? d2 : d1);
-	writemmr(par, DR2, direction ? d1 : d2);
+	writemmr(par, SRC1, direction ? s2 : s1);
+	writemmr(par, SRC2, direction ? s1 : s2);
+	writemmr(par, DST1, direction ? d2 : d1);
+	writemmr(par, DST2, direction ? d1 : d2);
 	writemmr(par, 0x2124,
 		 0x80000000 | 1 << 22 | 1 << 10 | 1 << 7 | direction);
 }
@@ -497,27 +421,12 @@ static void image_copy_rect(struct tridentfb_par *par,
 
 static void tgui_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 {
-	unsigned char x = 0;
+	unsigned char x = bpp == 24 ? 3 : (bpp >> 4);
 
 	/* disable clipping */
 	writemmr(par, 0x2148, 0);
 	writemmr(par, 0x214C, point(4095, 2047));
 
-	switch (bpp) {
-	case 8:
-		x = 0;
-		break;
-	case 16:
-		x = 1;
-		break;
-	case 24:
-		x = 3;
-		break;
-	case 32:
-		x = 2;
-		break;
-	}
-
 	switch ((pitch * bpp) / 8) {
 	case 8192:
 	case 512:
@@ -541,11 +450,11 @@ static void tgui_fill_rect(struct tridentfb_par *par,
 			   u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
 {
 	t_outb(par, ROP_P, 0x2127);
-	writemmr(par, 0x212c, c);
-	writemmr(par, 0x2128, 0x4020);
-	writemmr(par, 0x2140, point(w - 1, h - 1));
-	writemmr(par, 0x2138, point(x, y));
-	t_outb(par, 1, 0x2124);
+	writemmr(par, OLDCLR, c);
+	writemmr(par, DRAWFL, 0x4020);
+	writemmr(par, OLDDIM, point(w - 1, h - 1));
+	writemmr(par, OLDDST, point(x, y));
+	t_outb(par, 1, OLDCMD);
 }
 
 static void tgui_copy_rect(struct tridentfb_par *par,
@@ -572,12 +481,12 @@ static void tgui_copy_rect(struct tridentfb_par *par,
 		y2_tmp = y2;
 	}
 
-	writemmr(par, 0x2128, 0x4 | flags);
+	writemmr(par, DRAWFL, 0x4 | flags);
 	t_outb(par, ROP_S, 0x2127);
-	writemmr(par, 0x213C, point(x1_tmp, y1_tmp));
-	writemmr(par, 0x2138, point(x2_tmp, y2_tmp));
-	writemmr(par, 0x2140, point(w - 1, h - 1));
-	t_outb(par, 1, 0x2124);
+	writemmr(par, OLDSRC, point(x1_tmp, y1_tmp));
+	writemmr(par, OLDDST, point(x2_tmp, y2_tmp));
+	writemmr(par, OLDDIM, point(w - 1, h - 1));
+	t_outb(par, 1, OLDCMD);
 }
 
 /*
@@ -588,37 +497,40 @@ static void tridentfb_fillrect(struct fb_info *info,
 			       const struct fb_fillrect *fr)
 {
 	struct tridentfb_par *par = info->par;
-	int bpp = info->var.bits_per_pixel;
-	int col = 0;
+	int col;
 
-	switch (bpp) {
-	default:
-	case 8:
-		col |= fr->color;
+	if (info->var.bits_per_pixel == 8) {
+		col = fr->color;
 		col |= col << 8;
 		col |= col << 16;
-		break;
-	case 16:
-		col = ((u32 *)(info->pseudo_palette))[fr->color];
-		break;
-	case 32:
+	} else
 		col = ((u32 *)(info->pseudo_palette))[fr->color];
-		break;
-	}
 
+	par->wait_engine(par);
 	par->fill_rect(par, fr->dx, fr->dy, fr->width,
 		       fr->height, col, fr->rop);
-	par->wait_engine(par);
 }
+
 static void tridentfb_copyarea(struct fb_info *info,
 			       const struct fb_copyarea *ca)
 {
 	struct tridentfb_par *par = info->par;
 
+	par->wait_engine(par);
 	par->copy_rect(par, ca->sx, ca->sy, ca->dx, ca->dy,
 		       ca->width, ca->height);
+}
+
+static int tridentfb_sync(struct fb_info *info)
+{
+	struct tridentfb_par *par = info->par;
+
 	par->wait_engine(par);
+	return 0;
 }
+#else
+#define tridentfb_fillrect cfb_fillrect
+#define tridentfb_copyarea cfb_copyarea
 #endif /* CONFIG_FB_TRIDENT_ACCEL */
 
 /*
@@ -921,6 +833,8 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 	/* check color depth */
 	if (bpp == 24)
 		bpp = var->bits_per_pixel = 32;
+	if (bpp != 8 && bpp != 16 && bpp != 32)
+		return -EINVAL;
 	if (par->chip_id == TGUI9440 && bpp == 32)
 		return -EINVAL;
 	/* check whether resolution fits on panel and in memory */
@@ -928,8 +842,15 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	/* various resolution checks */
 	var->xres = (var->xres + 7) & ~0x7;
-	if (var->xres != var->xres_virtual)
+	if (var->xres > var->xres_virtual)
 		var->xres_virtual = var->xres;
+	if (var->yres > var->yres_virtual)
+		var->yres_virtual = var->yres;
+	if (var->xres_virtual > 4095 || var->yres > 2048)
+		return -EINVAL;
+	/* prevent from position overflow for acceleration */
+	if (var->yres_virtual > 0xffff)
+		return -EINVAL;
 	line_length = var->xres_virtual * bpp / 8;
 #ifdef CONFIG_FB_TRIDENT_ACCEL
 	if (!is3Dchip(par->chip_id)) {
@@ -944,6 +865,8 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 			var->xres_virtual = 4096 * 8 / bpp;
 		else if (line_length <= 8192)
 			var->xres_virtual = 8192 * 8 / bpp;
+		else
+			return -EINVAL;
 
 		line_length = var->xres_virtual * bpp / 8;
 	}
@@ -1229,9 +1152,6 @@ static int tridentfb_set_par(struct fb_info *info)
 	case 8:
 		tmp = 0;
 		break;
-	case 15:
-		tmp = 0x10;
-		break;
 	case 16:
 		tmp = 0x30;
 		break;
@@ -1352,10 +1272,11 @@ static struct fb_ops tridentfb_ops = {
 	.fb_blank = tridentfb_blank,
 	.fb_check_var = tridentfb_check_var,
 	.fb_set_par = tridentfb_set_par,
-#ifdef CONFIG_FB_TRIDENT_ACCEL
 	.fb_fillrect = tridentfb_fillrect,
 	.fb_copyarea = tridentfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
+#ifdef CONFIG_FB_TRIDENT_ACCEL
+	.fb_sync = tridentfb_sync,
 #endif
 };
 
@@ -1366,7 +1287,6 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	unsigned char revision;
 	struct fb_info *info;
 	struct tridentfb_par *default_par;
-	int defaultaccel;
 	int chip3D;
 	int chip_id;
 
@@ -1448,9 +1368,6 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 
 	default_par->chip_id = chip_id;
 
-	/* acceleration is on by default for 3D chips */
-	defaultaccel = chip3D && !noaccel;
-
 	/* setup MMIO region */
 	tridentfb_fix.mmio_start = pci_resource_start(dev, 1);
 	tridentfb_fix.mmio_len = chip3D ? 0x20000 : 0x10000;
@@ -1515,7 +1432,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	if (err < 0)
 		goto out_unmap2;
 
-	if (defaultaccel && default_par->init_accel)
+	if (!noaccel && default_par->init_accel)
 		info->var.accel_flags |= FB_ACCELF_TEXT;
 	else
 		info->var.accel_flags &= ~FB_ACCELF_TEXT;
diff --git a/include/video/trident.h b/include/video/trident.h
index 76d81b2198d..7540501bc04 100644
--- a/include/video/trident.h
+++ b/include/video/trident.h
@@ -4,7 +4,7 @@
 #endif
 
 #if TRIDENTFB_DEBUG
-#define debug(f,a...)	printk("%s:" f,  __FUNCTION__ , ## a);mdelay(1000);
+#define debug(f,a...)	printk("%s:" f,  __FUNCTION__ , ## a);mdelay(100);
 #else
 #define debug(f,a...)
 #endif
@@ -124,3 +124,22 @@
 #define BiosMode     0x5c
 #define BiosReg      0x5d
 
+/* Graphics Engine */
+#define STATUS	0x2120
+#define OLDCMD	0x2124
+#define DRAWFL	0x2128
+#define OLDCLR	0x212C
+#define OLDDST	0x2138
+#define OLDSRC	0x213C
+#define OLDDIM	0x2140
+#define CMD	0x2144
+#define ROP	0x2148
+#define COLOR	0x2160
+#define SRC1	0x2100
+#define SRC2	0x2104
+#define DST1	0x2108
+#define DST2	0x210C
+
+#define ROP_S	0xCC
+#define ROP_P	0xF0
+#define ROP_X	0x66
-- 
cgit v1.2.3


From 2c86a0c26fbe8ea218f7a267645679fb78aba8a3 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:03 -0700
Subject: tridentfb: acceleration bug fixes

This patch fixes two problems when acceleration is enabled:

 - bit for bitblt direction is corrected
   so scrolling down works as expected on 3DImage chips

 - initialization of acceleration is done later
   this helps with initial console malfuntion (on Blade3D
   chips) well documented here:
   http://marc.info/?l=linux-fbdev-users&m=111386953124478&w=2

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 4a1258f9509..d896dee7b48 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -395,7 +395,7 @@ static void image_fill_rect(struct tridentfb_par *par,
 static void image_copy_rect(struct tridentfb_par *par,
 			    u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 {
-	int direction = 2;
+	int direction = 0x4;
 	u32 s1 = point(x1, y1);
 	u32 s2 = point(x1 + w - 1, y1 + h - 1);
 	u32 d1 = point(x2, y2);
@@ -1075,10 +1075,6 @@ static int tridentfb_set_par(struct fb_info *info)
 	/* enable GE for text acceleration */
 	write3X4(par, GraphEngReg, 0x80);
 
-#ifdef CONFIG_FB_TRIDENT_ACCEL
-	par->init_accel(par, info->var.xres_virtual, bpp);
-#endif
-
 	switch (bpp) {
 	case 8:
 		tmp = 0x00;
@@ -1173,6 +1169,10 @@ static int tridentfb_set_par(struct fb_info *info)
 		set_number_of_lines(par, info->var.yres);
 	info->fix.line_length = info->var.xres_virtual * bpp / 8;
 	set_lwidth(par, info->fix.line_length / 8);
+#ifdef CONFIG_FB_TRIDENT_ACCEL
+	par->init_accel(par, info->var.xres_virtual, bpp);
+#endif
+
 	info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
 	info->cmap.len = (bpp == 8) ? 256 : 16;
 	debug("exit\n");
-- 
cgit v1.2.3


From 34dec24317d6824b7db172bb0072b909a9c376f2 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:04 -0700
Subject: tridentfb: various pixclock and timing improvements

This patch fixes few issues related to timings and pixclock generation:

 - disallow the pixclocks with numerator lower than
   double denominator. This fixes display instability
   for some modes.
 - choose the pixelclock with the highest
   numerator and denominator values. This improve
   image quality and fixes display instability
   for some modes.
 - make interlaced modes work.
 - set synchronization pulses polarization
   correctly.
 - horizontal synchronization timing are now
   the same as generated by X.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 35 ++++++++++++++++++++++++++++-------
 1 file changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index d896dee7b48..ff82ec1e5e4 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -680,10 +680,12 @@ static void set_vclk(struct tridentfb_par *par, unsigned long freq)
 
 	d = 20000;
 	for (k = 1; k >= 0; k--)
-		for (m = 0; m < 32; m++)
-			for (n = 0; n < 122; n++) {
+		for (m = 0; m < 32; m++) {
+			n = 2 * (m + 2) - 8;
+			for (n = (n < 0 ? 0 : n); n < 122; n++) {
 				fi = ((14318l * (n + 8)) / (m + 2)) >> k;
-				if ((di = abs(fi - freq)) < d) {
+				di = abs(fi - freq);
+				if (di <= d) {
 					d = di;
 					best_n = n;
 					best_m = m;
@@ -692,6 +694,7 @@ static void set_vclk(struct tridentfb_par *par, unsigned long freq)
 				if (fi > freq)
 					break;
 			}
+		}
 
 	if (is_oldclock(par->chip_id)) {
 		lo = best_n | (best_m << 7);
@@ -977,8 +980,8 @@ static int tridentfb_set_par(struct fb_info *info)
 
 	debug("enter\n");
 	hdispend = var->xres / 8 - 1;
-	hsyncstart = (var->xres + var->right_margin) / 8 - 1;
-	hsyncend = (var->xres + var->right_margin + var->hsync_len) / 8 - 1;
+	hsyncstart = (var->xres + var->right_margin) / 8;
+	hsyncend = (var->xres + var->right_margin + var->hsync_len) / 8;
 	htotal = (var->xres + var->left_margin + var->right_margin +
 		  var->hsync_len) / 8 - 5;
 	hblankstart = hdispend + 1;
@@ -991,8 +994,22 @@ static int tridentfb_set_par(struct fb_info *info)
 	vblankstart = vdispend + 1;
 	vblankend = vtotal;
 
+	if (info->var.vmode & FB_VMODE_INTERLACED) {
+		vtotal /= 2;
+		vdispend /= 2;
+		vsyncstart /= 2;
+		vsyncend /= 2;
+		vblankstart /= 2;
+		vblankend /= 2;
+	}
+
 	crtc_unlock(par);
 	write3CE(par, CyberControl, 8);
+	tmp = 0xEB;
+	if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+		tmp &= ~0x40;
+	if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+		tmp &= ~0x80;
 
 	if (par->flatpanel && var->xres < nativex) {
 		/*
@@ -1000,7 +1017,7 @@ static int tridentfb_set_par(struct fb_info *info)
 		 * than requested resolution decide whether
 		 * we stretch or center
 		 */
-		t_outb(par, 0xEB, VGA_MIS_W);
+		t_outb(par, tmp | 0xC0, VGA_MIS_W);
 
 		shadowmode_on(par);
 
@@ -1010,7 +1027,7 @@ static int tridentfb_set_par(struct fb_info *info)
 			screen_stretch(par);
 
 	} else {
-		t_outb(par, 0x2B, VGA_MIS_W);
+		t_outb(par, tmp, VGA_MIS_W);
 		write3CE(par, CyberControl, 8);
 	}
 
@@ -1071,6 +1088,10 @@ static int tridentfb_set_par(struct fb_info *info)
 	tmp = (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80;
 	/* enable access extended memory */
 	write3X4(par, CRTCModuleTest, tmp);
+	tmp = read3CE(par, MiscIntContReg) & ~0x4;
+	if (info->var.vmode & FB_VMODE_INTERLACED)
+		tmp |= 0x4;
+	write3CE(par, MiscIntContReg, tmp);
 
 	/* enable GE for text acceleration */
 	write3X4(par, GraphEngReg, 0x80);
-- 
cgit v1.2.3


From 01a2d9ed85c945fc8a672622780533a1a0b7caf5 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:04 -0700
Subject: tridentfb: acceleration constants change

This patch replaces deprecated constant FB_ACCELF_TEXT with
FBINFO_HWACCEL_DISABLED and adds constants for Trident families of
accelerators.

The FBINFO_HWACCEL_DISABLED is correctly used so noaccel parameter works
now.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 45 +++++++++++++++++++++++++++++++--------------
 include/linux/fb.h        |  4 ++++
 2 files changed, 35 insertions(+), 14 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index ff82ec1e5e4..279411523ed 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -499,6 +499,10 @@ static void tridentfb_fillrect(struct fb_info *info,
 	struct tridentfb_par *par = info->par;
 	int col;
 
+	if (info->flags & FBINFO_HWACCEL_DISABLED) {
+		cfb_fillrect(info, fr);
+		return;
+	}
 	if (info->var.bits_per_pixel == 8) {
 		col = fr->color;
 		col |= col << 8;
@@ -516,6 +520,10 @@ static void tridentfb_copyarea(struct fb_info *info,
 {
 	struct tridentfb_par *par = info->par;
 
+	if (info->flags & FBINFO_HWACCEL_DISABLED) {
+		cfb_copyarea(info, ca);
+		return;
+	}
 	par->wait_engine(par);
 	par->copy_rect(par, ca->sx, ca->sy, ca->dx, ca->dy,
 		       ca->width, ca->height);
@@ -525,7 +533,8 @@ static int tridentfb_sync(struct fb_info *info)
 {
 	struct tridentfb_par *par = info->par;
 
-	par->wait_engine(par);
+	if (!(info->flags & FBINFO_HWACCEL_DISABLED))
+		par->wait_engine(par);
 	return 0;
 }
 #else
@@ -855,8 +864,9 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 	if (var->yres_virtual > 0xffff)
 		return -EINVAL;
 	line_length = var->xres_virtual * bpp / 8;
-#ifdef CONFIG_FB_TRIDENT_ACCEL
-	if (!is3Dchip(par->chip_id)) {
+
+	if (!is3Dchip(par->chip_id) &&
+	    !(info->flags & FBINFO_HWACCEL_DISABLED)) {
 		/* acceleration requires line length to be power of 2 */
 		if (line_length <= 512)
 			var->xres_virtual = 512 * 8 / bpp;
@@ -873,7 +883,7 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 
 		line_length = var->xres_virtual * bpp / 8;
 	}
-#endif
+
 	if (var->yres > var->yres_virtual)
 		var->yres_virtual = var->yres;
 	if (line_length * var->yres_virtual > info->fix.smem_len)
@@ -1190,9 +1200,9 @@ static int tridentfb_set_par(struct fb_info *info)
 		set_number_of_lines(par, info->var.yres);
 	info->fix.line_length = info->var.xres_virtual * bpp / 8;
 	set_lwidth(par, info->fix.line_length / 8);
-#ifdef CONFIG_FB_TRIDENT_ACCEL
-	par->init_accel(par, info->var.xres_virtual, bpp);
-#endif
+
+	if (!(info->flags & FBINFO_HWACCEL_DISABLED))
+		par->init_accel(par, info->var.xres_virtual, bpp);
 
 	info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
 	info->cmap.len = (bpp == 8) ? 256 : 16;
@@ -1326,6 +1336,9 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		output("*** Please do use cyblafb, Cyberblade/i1 support "
 		       "will soon be removed from tridentfb!\n");
 
+#ifndef CONFIG_FB_TRIDENT_ACCEL
+	noaccel = 1;
+#endif
 
 	/* If PCI id is 0x9660 then further detect chip type */
 
@@ -1370,21 +1383,25 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		default_par->wait_engine = xp_wait_engine;
 		default_par->fill_rect = xp_fill_rect;
 		default_par->copy_rect = xp_copy_rect;
+		tridentfb_fix.accel = FB_ACCEL_TRIDENT_BLADEXP;
 	} else if (is_blade(chip_id)) {
 		default_par->init_accel = blade_init_accel;
 		default_par->wait_engine = blade_wait_engine;
 		default_par->fill_rect = blade_fill_rect;
 		default_par->copy_rect = blade_copy_rect;
+		tridentfb_fix.accel = FB_ACCEL_TRIDENT_BLADE3D;
 	} else if (chip3D) {			/* 3DImage family left */
 		default_par->init_accel = image_init_accel;
 		default_par->wait_engine = image_wait_engine;
 		default_par->fill_rect = image_fill_rect;
 		default_par->copy_rect = image_copy_rect;
+		tridentfb_fix.accel = FB_ACCEL_TRIDENT_3DIMAGE;
 	} else { 				/* TGUI 9440/96XX family */
 		default_par->init_accel = tgui_init_accel;
 		default_par->wait_engine = xp_wait_engine;
 		default_par->fill_rect = tgui_fill_rect;
 		default_par->copy_rect = tgui_copy_rect;
+		tridentfb_fix.accel = FB_ACCEL_TRIDENT_TGUI;
 	}
 
 	default_par->chip_id = chip_id;
@@ -1441,9 +1458,13 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	info->pseudo_palette = default_par->pseudo_pal;
 
 	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
-#ifdef CONFIG_FB_TRIDENT_ACCEL
-	info->flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
-#endif
+	if (!noaccel && default_par->init_accel) {
+		info->flags &= ~FBINFO_HWACCEL_DISABLED;
+		info->flags |= FBINFO_HWACCEL_COPYAREA;
+		info->flags |= FBINFO_HWACCEL_FILLRECT;
+	} else
+		info->flags |= FBINFO_HWACCEL_DISABLED;
+
 	if (!fb_find_mode(&info->var, info,
 			  mode_option, NULL, 0, NULL, bpp)) {
 		err = -EINVAL;
@@ -1453,10 +1474,6 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	if (err < 0)
 		goto out_unmap2;
 
-	if (!noaccel && default_par->init_accel)
-		info->var.accel_flags |= FB_ACCELF_TEXT;
-	else
-		info->var.accel_flags &= ~FB_ACCELF_TEXT;
 	info->var.activate |= FB_ACTIVATE_NOW;
 	info->device = &dev->dev;
 	if (register_framebuffer(info) < 0) {
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 72295b09922..a084d133586 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -120,6 +120,10 @@ struct dentry;
 #define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
 #define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
 #define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
+#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
+#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
+#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
 #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
 #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
 #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
-- 
cgit v1.2.3


From 5cf138457af20b0ef79d8c249381927718ca1417 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:05 -0700
Subject: tridentfb: source code improvements

This patch contains general source code improvments:
 - more simple functions are inline
 - removes some meaningless output and the VERSION
   string as it is no use
 - eng_par is moved into the tridentfb_par
 - removed small section of code for CyberBladeXPAi1
   which is maybe right for only one resolution
   and refresh rate and is probably redundant now
 - other minor improvements

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 83 +++++++++++++++++------------------------------
 include/video/trident.h   |  4 +--
 2 files changed, 32 insertions(+), 55 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 279411523ed..b6065effc5e 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -24,8 +24,6 @@
 #include <video/vga.h>
 #include <video/trident.h>
 
-#define VERSION		"0.7.9-NEWAPI"
-
 struct tridentfb_par {
 	void __iomem *io_virt;	/* iospace virtual memory address */
 	u32 pseudo_pal[16];
@@ -37,9 +35,9 @@ struct tridentfb_par {
 		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
 	void (*copy_rect)
 		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
+	unsigned char eng_oper;	/* engine operation... */
 };
 
-static unsigned char eng_oper;	/* engine operation... */
 static struct fb_ops tridentfb_ops;
 
 static struct fb_fix_screeninfo tridentfb_fix = {
@@ -53,7 +51,7 @@ static struct fb_fix_screeninfo tridentfb_fix = {
 /* defaults which are normally overriden by user values */
 
 /* video mode */
-static char *mode_option __devinitdata = "640x480";
+static char *mode_option __devinitdata = "640x480-8@60";
 static int bpp __devinitdata = 8;
 
 static int noaccel __devinitdata;
@@ -84,24 +82,22 @@ MODULE_PARM_DESC(fp, "Define if flatpanel is connected");
 module_param(crt, int, 0);
 MODULE_PARM_DESC(crt, "Define if CRT is connected");
 
-static int is_oldclock(int id)
+static inline int is_oldclock(int id)
 {
 	return	(id == TGUI9440) ||
 		(id == TGUI9660) ||
 		(id == CYBER9320);
 }
 
-static int is_oldprotect(int id)
+static inline int is_oldprotect(int id)
 {
-	return	(id == TGUI9440) ||
-		(id == TGUI9660) ||
+	return	is_oldclock(id) ||
 		(id == PROVIDIA9685) ||
-		(id == CYBER9320) ||
 		(id == CYBER9382) ||
 		(id == CYBER9385);
 }
 
-static int is_blade(int id)
+static inline int is_blade(int id)
 {
 	return	(id == BLADE3D) ||
 		(id == CYBERBLADEE4) ||
@@ -113,27 +109,22 @@ static int is_blade(int id)
 		(id == CYBERBLADEAi1D);
 }
 
-static int is_xp(int id)
+static inline int is_xp(int id)
 {
 	return	(id == CYBERBLADEXPAi1) ||
 		(id == CYBERBLADEXPm8) ||
 		(id == CYBERBLADEXPm16);
 }
 
-static int is3Dchip(int id)
+static inline int is3Dchip(int id)
 {
-	return ((id == BLADE3D) || (id == CYBERBLADEE4) ||
-		(id == CYBERBLADEi7) || (id == CYBERBLADEi7D) ||
+	return	is_blade(id) || is_xp(id) ||
 		(id == CYBER9397) || (id == CYBER9397DVD) ||
 		(id == CYBER9520) || (id == CYBER9525DVD) ||
-		(id == IMAGE975) || (id == IMAGE985) ||
-		(id == CYBERBLADEi1) || (id == CYBERBLADEi1D) ||
-		(id == CYBERBLADEAi1) || (id == CYBERBLADEAi1D) ||
-		(id == CYBERBLADEXPm8) || (id == CYBERBLADEXPm16) ||
-		(id == CYBERBLADEXPAi1));
+		(id == IMAGE975) || (id == IMAGE985);
 }
 
-static int iscyber(int id)
+static inline int iscyber(int id)
 {
 	switch (id) {
 	case CYBER9388:
@@ -153,13 +144,7 @@ static int iscyber(int id)
 		return 1;
 
 	case CYBER9320:
-	case TGUI9660:
-	case PROVIDIA9685:
-	case IMAGE975:
-	case IMAGE985:
-	case BLADE3D:
 	case CYBERBLADEi7:	/* VIA MPV4 integrated version */
-
 	default:
 		/* case CYBERBLDAEXPm8:  Strange */
 		/* case CYBERBLDAEXPm16: Strange */
@@ -275,7 +260,7 @@ static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 
 	t_outb(par, x, 0x2125);
 
-	eng_oper = x | 0x40;
+	par->eng_oper = x | 0x40;
 
 	writemmr(par, 0x2154, v1);
 	writemmr(par, 0x2150, v1);
@@ -284,10 +269,9 @@ static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp)
 
 static void xp_wait_engine(struct tridentfb_par *par)
 {
-	int count, timeout;
+	int count = 0;
+	int timeout = 0;
 
-	count = 0;
-	timeout = 0;
 	while (t_inb(par, STATUS) & 0x80) {
 		count++;
 		if (count == 10000000) {
@@ -313,16 +297,14 @@ static void xp_fill_rect(struct tridentfb_par *par,
 	writemmr(par, OLDDIM, point(h, w));
 	writemmr(par, OLDDST, point(y, x));
 	t_outb(par, 0x01, OLDCMD);
-	t_outb(par, eng_oper, 0x2125);
+	t_outb(par, par->eng_oper, 0x2125);
 }
 
 static void xp_copy_rect(struct tridentfb_par *par,
 			 u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 {
-	int direction;
 	u32 x1_tmp, x2_tmp, y1_tmp, y2_tmp;
-
-	direction = 0x0004;
+	int direction = 0x0004;
 
 	if ((x1 < x2) && (y1 == y2)) {
 		direction |= 0x0200;
@@ -602,7 +584,7 @@ static void disable_mmio(struct tridentfb_par *par)
 	t_outb(par, t_inb(par, 0x3D5) & ~0x01, 0x3D5);
 }
 
-static void crtc_unlock(struct tridentfb_par *par)
+static inline void crtc_unlock(struct tridentfb_par *par)
 {
 	write3X4(par, VGA_CRTC_V_SYNC_END,
 		 read3X4(par, VGA_CRTC_V_SYNC_END) & 0x7F);
@@ -642,7 +624,7 @@ static int __devinit get_nativex(struct tridentfb_par *par)
 }
 
 /* Set pitch */
-static void set_lwidth(struct tridentfb_par *par, int width)
+static inline void set_lwidth(struct tridentfb_par *par, int width)
 {
 	write3X4(par, VGA_CRTC_OFFSET, width & 0xFF);
 	write3X4(par, AddColReg,
@@ -661,7 +643,7 @@ static void screen_stretch(struct tridentfb_par *par)
 }
 
 /* For resolutions smaller than FP resolution center */
-static void screen_center(struct tridentfb_par *par)
+static inline void screen_center(struct tridentfb_par *par)
 {
 	write3CE(par, VertStretch, (read3CE(par, VertStretch) & 0x7C) | 0x80);
 	write3CE(par, HorStretch, (read3CE(par, HorStretch) & 0x7C) | 0x80);
@@ -967,12 +949,12 @@ static int tridentfb_pan_display(struct fb_var_screeninfo *var,
 	return 0;
 }
 
-static void shadowmode_on(struct tridentfb_par *par)
+static inline void shadowmode_on(struct tridentfb_par *par)
 {
 	write3CE(par, CyberControl, read3CE(par, CyberControl) | 0x81);
 }
 
-static void shadowmode_off(struct tridentfb_par *par)
+static inline void shadowmode_off(struct tridentfb_par *par)
 {
 	write3CE(par, CyberControl, read3CE(par, CyberControl) & 0x7E);
 }
@@ -980,7 +962,7 @@ static void shadowmode_off(struct tridentfb_par *par)
 /* Set the hardware to the requested video mode */
 static int tridentfb_set_par(struct fb_info *info)
 {
-	struct tridentfb_par *par = (struct tridentfb_par *)(info->par);
+	struct tridentfb_par *par = info->par;
 	u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart, hblankend;
 	u32 vtotal, vdispend, vsyncstart, vsyncend, vblankstart, vblankend;
 	struct fb_var_screeninfo *var = &info->var;
@@ -1159,11 +1141,6 @@ static int tridentfb_set_par(struct fb_info *info)
 	write3CE(par, 0x6, 0x05);	/* graphics mode */
 	write3CE(par, 0x7, 0x0F);	/* planes? */
 
-	if (par->chip_id == CYBERBLADEXPAi1) {
-		/* This fixes snow-effect in 32 bpp */
-		write3X4(par, VGA_CRTC_H_SYNC_START, 0x84);
-	}
-
 	/* graphics mode and support 256 color modes */
 	writeAttr(par, 0x10, 0x41);
 	writeAttr(par, 0x12, 0x0F);	/* planes */
@@ -1238,7 +1215,7 @@ static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			col |= col << 16;
 			((u32 *)(info->pseudo_palette))[regno] = col;
 		} else if (bpp == 32)		/* ARGB 8888 */
-			((u32*)info->pseudo_palette)[regno] =
+			((u32 *)info->pseudo_palette)[regno] =
 				((transp & 0xFF00) << 16)	|
 				((red & 0xFF00) << 8)		|
 				((green & 0xFF00))		|
@@ -1249,7 +1226,7 @@ static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	return 0;
 }
 
-/* Try blanking the screen.For flat panels it does nothing */
+/* Try blanking the screen. For flat panels it does nothing */
 static int tridentfb_blank(int blank_mode, struct fb_info *info)
 {
 	unsigned char PMCont, DPMSCont;
@@ -1408,9 +1385,10 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 
 	/* setup MMIO region */
 	tridentfb_fix.mmio_start = pci_resource_start(dev, 1);
-	tridentfb_fix.mmio_len = chip3D ? 0x20000 : 0x10000;
+	tridentfb_fix.mmio_len = pci_resource_len(dev, 1);
 
-	if (!request_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len, "tridentfb")) {
+	if (!request_mem_region(tridentfb_fix.mmio_start,
+				tridentfb_fix.mmio_len, "tridentfb")) {
 		debug("request_region failed!\n");
 		framebuffer_release(info);
 		return -1;
@@ -1431,7 +1409,8 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	tridentfb_fix.smem_start = pci_resource_start(dev, 0);
 	tridentfb_fix.smem_len = get_memsize(default_par);
 
-	if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
+	if (!request_mem_region(tridentfb_fix.smem_start,
+				tridentfb_fix.smem_len, "tridentfb")) {
 		debug("request_mem_region failed!\n");
 		disable_mmio(info->par);
 		err = -1;
@@ -1447,7 +1426,6 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		goto out_unmap2;
 	}
 
-	output("%s board found\n", pci_name(dev));
 	default_par->flatpanel = is_flatpanel(default_par);
 
 	if (default_par->flatpanel)
@@ -1477,7 +1455,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	info->var.activate |= FB_ACTIVATE_NOW;
 	info->device = &dev->dev;
 	if (register_framebuffer(info) < 0) {
-		printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
+		printk(KERN_ERR "tridentfb: could not register framebuffer\n");
 		fb_dealloc_cmap(&info->cmap);
 		err = -EINVAL;
 		goto out_unmap2;
@@ -1599,7 +1577,6 @@ static int __init tridentfb_init(void)
 		return -ENODEV;
 	tridentfb_setup(option);
 #endif
-	output("Trident framebuffer %s initializing\n", VERSION);
 	return pci_register_driver(&tridentfb_pci_driver);
 }
 
diff --git a/include/video/trident.h b/include/video/trident.h
index 7540501bc04..85ced9d9131 100644
--- a/include/video/trident.h
+++ b/include/video/trident.h
@@ -4,9 +4,9 @@
 #endif
 
 #if TRIDENTFB_DEBUG
-#define debug(f,a...)	printk("%s:" f,  __FUNCTION__ , ## a);mdelay(100);
+#define debug(f, a...)	printk("%s:" f,  __func__ , ## a);
 #else
-#define debug(f,a...)
+#define debug(f, a...)
 #endif
 
 #define output(f, a...) pr_info("tridentfb: " f, ## a)
-- 
cgit v1.2.3


From 13b0de49f52ec8638b3e3e59192a959b35214d9e Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:06 -0700
Subject: tridentfb: fix console freeze when switching from X11

This patch fixes two problems when acceleration is enabled:

 - console switch from the Xorg locks up the computer
   because the Xorg code locks some registers and disables
   the mmio mode, so reenable these in the
   tridentfb_set_par() and enable_mmio()

 - blacklist the Image975 chipset from setting PCI burst
   mode. This helps with random lock ups of the
   framebuffer on this chip. The same fix is probably
   needed for the Xorg as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index b6065effc5e..da4b464cbdb 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -558,13 +558,15 @@ static inline void write3CE(struct tridentfb_par *par, int reg,
 	vga_mm_wgfx(par->io_virt, reg, val);
 }
 
-static void enable_mmio(void)
+static void enable_mmio(struct tridentfb_par *par)
 {
 	/* Goto New Mode */
 	vga_io_rseq(0x0B);
 
 	/* Unprotect registers */
 	vga_io_wseq(NewMode1, 0x80);
+	if (!is_oldprotect(par->chip_id))
+		vga_io_wseq(Protection, 0x92);
 
 	/* Enable MMIO */
 	outb(PCIReg, 0x3D4);
@@ -578,6 +580,8 @@ static void disable_mmio(struct tridentfb_par *par)
 
 	/* Unprotect registers */
 	vga_mm_wseq(par->io_virt, NewMode1, 0x80);
+	if (!is_oldprotect(par->chip_id))
+		vga_mm_wseq(par->io_virt, Protection, 0x92);
 
 	/* Disable MMIO */
 	t_outb(par, PCIReg, 0x3D4);
@@ -995,6 +999,7 @@ static int tridentfb_set_par(struct fb_info *info)
 		vblankend /= 2;
 	}
 
+	enable_mmio(par);
 	crtc_unlock(par);
 	write3CE(par, CyberControl, 8);
 	tmp = 0xEB;
@@ -1116,7 +1121,7 @@ static int tridentfb_set_par(struct fb_info *info)
 	if (!is_xp(par->chip_id))
 		write3X4(par, Performance, read3X4(par, Performance) | 0x10);
 	/* MMIO & PCI read and write burst enable */
-	if (par->chip_id != TGUI9440)
+	if (par->chip_id != TGUI9440 && par->chip_id != IMAGE975)
 		write3X4(par, PCIReg, read3X4(par, PCIReg) | 0x06);
 
 	vga_mm_wseq(par->io_virt, 0, 3);
@@ -1403,7 +1408,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		goto out_unmap1;
 	}
 
-	enable_mmio();
+	enable_mmio(default_par);
 
 	/* setup framebuffer memory */
 	tridentfb_fix.smem_start = pci_resource_start(dev, 0);
-- 
cgit v1.2.3


From a4af1798d768ab2f12ab623e21ad68dc8c248005 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:06 -0700
Subject: tridentfb: fix 224 color logo at 8 bpp

Fix depth setting for 8 bpp mode.  The nice 224 color logo is not
displayed in 8 bpp depth without this fix.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index da4b464cbdb..1c3f0ba4b33 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -878,11 +878,9 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 	switch (bpp) {
 	case 8:
 		var->red.offset = 0;
-		var->green.offset = 0;
-		var->blue.offset = 0;
-		var->red.length = 6;
-		var->green.length = 6;
-		var->blue.length = 6;
+		var->red.length = 8;
+		var->green = var->red;
+		var->blue = var->red;
 		break;
 	case 16:
 		var->red.offset = 11;
-- 
cgit v1.2.3


From f330c4b1961d730ef15ac184e4b7f1c25847d0ae Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:07 -0700
Subject: tridentfb: y-panning fixes

The Trident cards uses only 20-bit address of screen start in double
words.  This allows addressing for only 4MB of video memory so check this.

Also remove some redundant checks and assignments.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 1c3f0ba4b33..138140bdb49 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -870,8 +870,10 @@ static int tridentfb_check_var(struct fb_var_screeninfo *var,
 		line_length = var->xres_virtual * bpp / 8;
 	}
 
-	if (var->yres > var->yres_virtual)
-		var->yres_virtual = var->yres;
+	/* datasheet specifies how to set panning only up to 4 MB */
+	if (line_length * (var->yres_virtual - var->yres) > (4 << 20))
+		var->yres_virtual = ((4 << 20) / line_length) + var->yres;
+
 	if (line_length * var->yres_virtual > info->fix.smem_len)
 		return -EINVAL;
 
@@ -944,8 +946,6 @@ static int tridentfb_pan_display(struct fb_var_screeninfo *var,
 	debug("enter\n");
 	offset = (var->xoffset + (var->yoffset * var->xres_virtual))
 		* var->bits_per_pixel / 32;
-	info->var.xoffset = var->xoffset;
-	info->var.yoffset = var->yoffset;
 	set_screen_start(par, offset);
 	debug("exit\n");
 	return 0;
@@ -1225,7 +1225,6 @@ static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 				((blue & 0xFF00) >> 8);
 	}
 
-/* 	debug("exit\n"); */
 	return 0;
 }
 
-- 
cgit v1.2.3


From 6280fd4f9c2683a4d2f096320dd74ded4e5106ad Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:08 -0700
Subject: tridentfb: Blade3D clock fixes

This patch fixes following problems:
- does not allow the m parameter to reach 0 as
  it locks the graphics core (power cycle needed)
- for the newer chips (with new clock registers)
  does not allow of n / m ratio below 4 as it gives
  unstable image on the Blade3D core
- extend shift parameter (k) range  to 2 for the newer
  chips to cope with the n /m >= 4 limit at low resolution
  (bandwidth) modes
- prefer modes with higher n / m ratio (higher k values)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 138140bdb49..854e2e5af58 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -672,15 +672,16 @@ static void set_vclk(struct tridentfb_par *par, unsigned long freq)
 	unsigned long fi, d, di;
 	unsigned char best_m = 0, best_n = 0, best_k = 0;
 	unsigned char hi, lo;
+	unsigned char shift = !is_oldclock(par->chip_id) ? 2 : 1;
 
 	d = 20000;
-	for (k = 1; k >= 0; k--)
-		for (m = 0; m < 32; m++) {
-			n = 2 * (m + 2) - 8;
+	for (k = shift; k >= 0; k--)
+		for (m = 1; m < 32; m++) {
+			n = ((m + 2) << shift) - 8;
 			for (n = (n < 0 ? 0 : n); n < 122; n++) {
 				fi = ((14318l * (n + 8)) / (m + 2)) >> k;
 				di = abs(fi - freq);
-				if (di <= d) {
+				if (di < d || (di == d && k == best_k)) {
 					d = di;
 					best_n = n;
 					best_m = m;
-- 
cgit v1.2.3


From 0292be4a382957016e8b574dc292779cfb49e029 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:08 -0700
Subject: tridentfb: add imageblit acceleration for Blade3D family

Add imageblit acceleration for the Blade3D family of cores.  The code is
based on code from the cyblafb driver.

It is a step toward assimilating back the cyblafb driver into the
tridentfb driver.  The cyblafb driver handles a subfamily of the Trident
Blade3d cores.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 79 +++++++++++++++++++++++++++++++++++++++++++++--
 include/video/trident.h   |  1 +
 2 files changed, 77 insertions(+), 3 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index 854e2e5af58..b21f8423902 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -35,11 +35,12 @@ struct tridentfb_par {
 		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
 	void (*copy_rect)
 		(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
+	void (*image_blit)
+		(struct tridentfb_par *par, const char*,
+		 u32, u32, u32, u32, u32, u32);
 	unsigned char eng_oper;	/* engine operation... */
 };
 
-static struct fb_ops tridentfb_ops;
-
 static struct fb_fix_screeninfo tridentfb_fix = {
 	.id = "Trident",
 	.type = FB_TYPE_PACKED_PIXELS,
@@ -212,6 +213,21 @@ static void blade_fill_rect(struct tridentfb_par *par,
 	writemmr(par, DST2, point(x + w - 1, y + h - 1));
 }
 
+static void blade_image_blit(struct tridentfb_par *par, const char *data,
+			     u32 x, u32 y, u32 w, u32 h, u32 c, u32 b)
+{
+	unsigned size = ((w + 31) >> 5) * h;
+
+	writemmr(par, COLOR, c);
+	writemmr(par, BGCOLOR, b);
+	writemmr(par, CMD, 0xa0000000 | 3 << 19);
+
+	writemmr(par, DST1, point(x, y));
+	writemmr(par, DST2, point(x + w - 1, y + h - 1));
+
+	memcpy(par->io_virt + 0x10000, data, 4 * size);
+}
+
 static void blade_copy_rect(struct tridentfb_par *par,
 			    u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
 {
@@ -497,6 +513,36 @@ static void tridentfb_fillrect(struct fb_info *info,
 		       fr->height, col, fr->rop);
 }
 
+static void tridentfb_imageblit(struct fb_info *info,
+				const struct fb_image *img)
+{
+	struct tridentfb_par *par = info->par;
+	int col, bgcol;
+
+	if ((info->flags & FBINFO_HWACCEL_DISABLED) || img->depth != 1) {
+		cfb_imageblit(info, img);
+		return;
+	}
+	if (info->var.bits_per_pixel == 8) {
+		col = img->fg_color;
+		col |= col << 8;
+		col |= col << 16;
+		bgcol = img->bg_color;
+		bgcol |= bgcol << 8;
+		bgcol |= bgcol << 16;
+	} else {
+		col = ((u32 *)(info->pseudo_palette))[img->fg_color];
+		bgcol = ((u32 *)(info->pseudo_palette))[img->bg_color];
+	}
+
+	par->wait_engine(par);
+	if (par->image_blit)
+		par->image_blit(par, img->data, img->dx, img->dy,
+				img->width, img->height, col, bgcol);
+	else
+		cfb_imageblit(info, img);
+}
+
 static void tridentfb_copyarea(struct fb_info *info,
 			       const struct fb_copyarea *ca)
 {
@@ -522,6 +568,7 @@ static int tridentfb_sync(struct fb_info *info)
 #else
 #define tridentfb_fillrect cfb_fillrect
 #define tridentfb_copyarea cfb_copyarea
+#define tridentfb_imageblit cfb_imageblit
 #endif /* CONFIG_FB_TRIDENT_ACCEL */
 
 /*
@@ -1285,7 +1332,7 @@ static struct fb_ops tridentfb_ops = {
 	.fb_set_par = tridentfb_set_par,
 	.fb_fillrect = tridentfb_fillrect,
 	.fb_copyarea = tridentfb_copyarea,
-	.fb_imageblit = cfb_imageblit,
+	.fb_imageblit = tridentfb_imageblit,
 #ifdef CONFIG_FB_TRIDENT_ACCEL
 	.fb_sync = tridentfb_sync,
 #endif
@@ -1369,6 +1416,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 		default_par->wait_engine = blade_wait_engine;
 		default_par->fill_rect = blade_fill_rect;
 		default_par->copy_rect = blade_copy_rect;
+		default_par->image_blit = blade_image_blit;
 		tridentfb_fix.accel = FB_ACCEL_TRIDENT_BLADE3D;
 	} else if (chip3D) {			/* 3DImage family left */
 		default_par->init_accel = image_init_accel;
@@ -1446,6 +1494,29 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	} else
 		info->flags |= FBINFO_HWACCEL_DISABLED;
 
+	info->pixmap.addr = kmalloc(4096, GFP_KERNEL);
+	if (!info->pixmap.addr) {
+		err = -ENOMEM;
+		goto out_unmap2;
+	}
+
+	info->pixmap.size = 4096;
+	info->pixmap.buf_align = 4;
+	info->pixmap.scan_align = 1;
+	info->pixmap.access_align = 32;
+	info->pixmap.flags = FB_PIXMAP_SYSTEM;
+
+	if (default_par->image_blit) {
+		info->flags |= FBINFO_HWACCEL_IMAGEBLIT;
+		info->pixmap.scan_align = 4;
+	}
+
+	if (noaccel) {
+		printk(KERN_DEBUG "disabling acceleration\n");
+		info->flags |= FBINFO_HWACCEL_DISABLED;
+		info->pixmap.scan_align = 1;
+	}
+
 	if (!fb_find_mode(&info->var, info,
 			  mode_option, NULL, 0, NULL, bpp)) {
 		err = -EINVAL;
@@ -1471,6 +1542,7 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 	return 0;
 
 out_unmap2:
+	kfree(info->pixmap.addr);
 	if (info->screen_base)
 		iounmap(info->screen_base);
 	release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
@@ -1494,6 +1566,7 @@ static void __devexit trident_pci_remove(struct pci_dev *dev)
 	release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
 	release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
 	pci_set_drvdata(dev, NULL);
+	kfree(info->pixmap.addr);
 	framebuffer_release(info);
 }
 
diff --git a/include/video/trident.h b/include/video/trident.h
index 85ced9d9131..b6ce19d1b61 100644
--- a/include/video/trident.h
+++ b/include/video/trident.h
@@ -135,6 +135,7 @@
 #define CMD	0x2144
 #define ROP	0x2148
 #define COLOR	0x2160
+#define BGCOLOR	0x2164
 #define SRC1	0x2100
 #define SRC2	0x2104
 #define DST1	0x2108
-- 
cgit v1.2.3


From 663b0e15877293451bdfea619db45eafae9dec54 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:09 -0700
Subject: tridentfb: remove warning message that cyblafb driver should be used

The tridentfb driver should handle now all chipsets handled by the cyblafb
driver.  Remove the message which claims that support will be removed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tridentfb.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index b21f8423902..479b2e79ad6 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -1359,10 +1359,6 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
 
 	chip_id = id->device;
 
-	if (chip_id == CYBERBLADEi1)
-		output("*** Please do use cyblafb, Cyberblade/i1 support "
-		       "will soon be removed from tridentfb!\n");
-
 #ifndef CONFIG_FB_TRIDENT_ACCEL
 	noaccel = 1;
 #endif
-- 
cgit v1.2.3


From 0b9cf3aa6b1e934807b40b4d478d7e11f7c43f55 Mon Sep 17 00:00:00 2001
From: Roland Kletzing <devzero@web.de>
Date: Wed, 23 Jul 2008 21:31:10 -0700
Subject: mdacon messing up default vc's - set default to vc13-16 again

mdacon incorrectly detects MDA hardware on systems without such graphics card.

One may load this module by chance, for example when doing some systematical
module-testing, and if there is no Monochrome Display Adapter attached ,
module init renders vc1-16 completely unusable.

I and others have run into this more than once.  see [Bug 224522 - modprobe
mdacon freezes machine -> https://bugzilla.novell.com/show_bug.cgi?id=224522 ]
for example

Apparently  proper MDA detection seems to be broken for a long time - seems to
be related to those #ifdef TEST_MDA_B statements added by Edward Betts.

this commit back in 2002 made things even worse :
http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=c72757b49c88914433244757fb4967fc63546685

It changed default vc allocation from 13-16 to 1-16 for no apparent reason
(!?) , and with that (and without X), mdacon grabs the vc you`re currently
sitting on and locks you out.

this is from Kconfig :
>config MDA_CONSOLE
>        depends on !M68K && !PARISC && ISA
>        tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
>        ---help---
>          Say Y here if you have an old MDA or monochrome Hercules graphics
>          adapter in your system acting as a second head ( = video card). You
>          will then be able to use two monitors with your Linux system. Do not
>          say Y here if your MDA card is the primary card in your system; the
>          normal VGA driver will handle it.

As we can see mdacon is just meant as an additional driver for dual-head
setup, and since kernel 2.4.36 still defaults to vc13-16 , setting the default
back to that value again shouldn`t do any harm.

Hereby i'm reverting that change, setting default back to to vc13-16 again.

Besides the fact that mdacon may be rarely or never be used these days and
could perhaps put to trash anyway (pre-dinosaur hardware!), indeed this is not
a real solution, but at least it removes the unfortunate side-effect of
messing up the vc you`re working on.

Signed-off-by: Roland Kletzing <devzero@web.de>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Tim Schmielau <tim@physik3.uni-rostock.de>
Cc: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/console/mdacon.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/video/console/mdacon.c b/drivers/video/console/mdacon.c
index 38a296bbdfc..9901064199b 100644
--- a/drivers/video/console/mdacon.c
+++ b/drivers/video/console/mdacon.c
@@ -71,13 +71,15 @@ static char *mda_type_name;
 
 /* console information */
 
-static int	mda_first_vc = 1;
+static int	mda_first_vc = 13;
 static int	mda_last_vc  = 16;
 
 static struct vc_data	*mda_display_fg = NULL;
 
 module_param(mda_first_vc, int, 0);
+MODULE_PARM_DESC(mda_first_vc, "First virtual console. Default: 13");
 module_param(mda_last_vc, int, 0);
+MODULE_PARM_DESC(mda_last_vc, "Last virtual console. Default: 16");
 
 /* MDA register values
  */
-- 
cgit v1.2.3


From 14aefd1b49ff3bd13caa37fb06bd53488d5d1486 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:31:12 -0700
Subject: video/sis/: remove compat code

This patch removes compat code for older kernel versions.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/sis/init.h       |  1 -
 drivers/video/sis/init301.h    |  1 -
 drivers/video/sis/initextlfb.c |  1 -
 drivers/video/sis/osdef.h      |  1 -
 drivers/video/sis/sis.h        | 22 +++++----------------
 drivers/video/sis/sis_accel.c  |  1 -
 drivers/video/sis/sis_main.c   | 44 ++++++++++--------------------------------
 drivers/video/sis/sis_main.h   |  4 ++--
 drivers/video/sis/vgatypes.h   |  4 ----
 9 files changed, 17 insertions(+), 62 deletions(-)

diff --git a/drivers/video/sis/init.h b/drivers/video/sis/init.h
index f40a680df86..b96005c39c6 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/sis/init.h
@@ -73,7 +73,6 @@
 #ifdef SIS_CP
 #undef SIS_CP
 #endif
-#include <linux/version.h>
 #include <linux/types.h>
 #include <asm/io.h>
 #include <linux/fb.h>
diff --git a/drivers/video/sis/init301.h b/drivers/video/sis/init301.h
index 7708e1e1d99..51d99222375 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/sis/init301.h
@@ -67,7 +67,6 @@
 #ifdef SIS_CP
 #undef SIS_CP
 #endif
-#include <linux/version.h>
 #include <linux/types.h>
 #include <asm/io.h>
 #include <linux/fb.h>
diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/sis/initextlfb.c
index 47a33501549..99c04a4855d 100644
--- a/drivers/video/sis/initextlfb.c
+++ b/drivers/video/sis/initextlfb.c
@@ -30,7 +30,6 @@
 #include "vgatypes.h"
 #include "vstruct.h"
 
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/fb.h>
 
diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
index c1492782cb1..6ff8f988a1a 100644
--- a/drivers/video/sis/osdef.h
+++ b/drivers/video/sis/osdef.h
@@ -87,7 +87,6 @@
 /**********************************************************************/
 
 #ifdef SIS_LINUX_KERNEL
-#include <linux/version.h>
 
 #ifdef CONFIG_FB_SIS_300
 #define SIS300
diff --git a/drivers/video/sis/sis.h b/drivers/video/sis/sis.h
index a14e8221103..7c5710e3fb5 100644
--- a/drivers/video/sis/sis.h
+++ b/drivers/video/sis/sis.h
@@ -24,8 +24,6 @@
 #ifndef _SIS_H_
 #define _SIS_H_
 
-#include <linux/version.h>
-
 #include "osdef.h"
 #include <video/sisfb.h>
 
@@ -42,16 +40,6 @@
 #define SIS_NEW_CONFIG_COMPAT
 #endif	/* CONFIG_COMPAT */
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
-#define SIS_IOTYPE1 void __iomem
-#define SIS_IOTYPE2 __iomem
-#define SISINITSTATIC static
-#else
-#define SIS_IOTYPE1 unsigned char
-#define SIS_IOTYPE2
-#define SISINITSTATIC
-#endif
-
 #undef SISFBDEBUG
 
 #ifdef SISFBDEBUG
@@ -505,8 +493,8 @@ struct sis_video_info {
 
 	unsigned long	UMAsize, LFBsize;
 
-	SIS_IOTYPE1	*video_vbase;
-	SIS_IOTYPE1	*mmio_vbase;
+	void __iomem	*video_vbase;
+	void __iomem	*mmio_vbase;
 
 	unsigned char	*bios_abase;
 
@@ -533,8 +521,8 @@ struct sis_video_info {
 	int		sisfb_nocrt2rate;
 
 	u32		heapstart;		/* offset  */
-	SIS_IOTYPE1	*sisfb_heap_start;	/* address */
-	SIS_IOTYPE1	*sisfb_heap_end;	/* address */
+	void __iomem	*sisfb_heap_start;	/* address */
+	void __iomem	*sisfb_heap_end;	/* address */
 	u32		sisfb_heap_size;
 	int		havenoheap;
 
@@ -612,7 +600,7 @@ struct sis_video_info {
 	u8		detectedpdca;
 	u8		detectedlcda;
 
-	SIS_IOTYPE1	*hwcursor_vbase;
+	void __iomem	*hwcursor_vbase;
 
 	int		chronteltype;
 	int		tvxpos, tvypos;
diff --git a/drivers/video/sis/sis_accel.c b/drivers/video/sis/sis_accel.c
index 7addf91d2fe..ceb434c95c0 100644
--- a/drivers/video/sis/sis_accel.c
+++ b/drivers/video/sis/sis_accel.c
@@ -28,7 +28,6 @@
  *			for more information and updates)
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/fb.h>
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index b9343844cd1..346d6458cf7 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -33,7 +33,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -41,13 +40,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
-#include <linux/tty.h>
-#else
 #include <linux/screen_info.h>
-#endif
-
 #include <linux/slab.h>
 #include <linux/fb.h>
 #include <linux/selection.h>
@@ -1167,11 +1160,7 @@ sisfb_set_mode(struct sis_video_info *ivideo, int clrscrn)
 	unsigned short modeno = ivideo->mode_no;
 
 	/* >=2.6.12's fbcon clears the screen anyway */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,12)
-	if(!clrscrn) modeno |= 0x80;
-#else
 	modeno |= 0x80;
-#endif
 
 	outSISIDXREG(SISSR, IND_SIS_PASSWORD, SIS_PASSWORD);
 
@@ -1436,11 +1425,8 @@ sisfb_set_par(struct fb_info *info)
 	if((err = sisfb_do_set_var(&info->var, 1, info)))
 		return err;
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
-	sisfb_get_fix(&info->fix, info->currcon, info);
-#else
 	sisfb_get_fix(&info->fix, -1, info);
-#endif
+
 	return 0;
 }
 
@@ -1676,14 +1662,8 @@ sisfb_blank(int blank, struct fb_info *info)
 
 /* ----------- FBDev related routines for all series ---------- */
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
 static int	sisfb_ioctl(struct fb_info *info, unsigned int cmd,
 			    unsigned long arg)
-#else
-static int	sisfb_ioctl(struct inode *inode, struct file *file,
-				unsigned int cmd, unsigned long arg,
-				struct fb_info *info)
-#endif
 {
 	struct sis_video_info	*ivideo = (struct sis_video_info *)info->par;
 	struct sis_memreq	sismemreq;
@@ -3986,8 +3966,7 @@ sisfb_handle_command(struct sis_video_info *ivideo, struct sisfb_cmd *sisfb_comm
 }
 
 #ifndef MODULE
-SISINITSTATIC int __init
-sisfb_setup(char *options)
+static int __init sisfb_setup(char *options)
 {
 	char *this_opt;
 
@@ -4086,9 +4065,9 @@ sisfb_setup(char *options)
 #endif
 
 static int __devinit
-sisfb_check_rom(SIS_IOTYPE1 *rom_base, struct sis_video_info *ivideo)
+sisfb_check_rom(void __iomem *rom_base, struct sis_video_info *ivideo)
 {
-	SIS_IOTYPE1 *rom;
+	void __iomem *rom;
 	int romptr;
 
 	if((readb(rom_base) != 0x55) || (readb(rom_base + 1) != 0xaa))
@@ -4117,10 +4096,9 @@ static unsigned char * __devinit
 sisfb_find_rom(struct pci_dev *pdev)
 {
 	struct sis_video_info *ivideo = pci_get_drvdata(pdev);
-	SIS_IOTYPE1 *rom_base;
+	void __iomem *rom_base;
 	unsigned char *myrombase = NULL;
 	u32 temp;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,11)
 	size_t romsize;
 
 	/* First, try the official pci ROM functions (except
@@ -4151,7 +4129,6 @@ sisfb_find_rom(struct pci_dev *pdev)
 	}
 
 	if(myrombase) return myrombase;
-#endif
 
 	/* Otherwise do it the conventional way. */
 
@@ -4225,7 +4202,7 @@ sisfb_post_map_vram(struct sis_video_info *ivideo, unsigned int *mapsize,
 static int __devinit
 sisfb_post_300_buswidth(struct sis_video_info *ivideo)
 {
-	SIS_IOTYPE1 *FBAddress = ivideo->video_vbase;
+	void __iomem *FBAddress = ivideo->video_vbase;
 	unsigned short temp;
 	unsigned char reg;
 	int i, j;
@@ -4273,7 +4250,7 @@ sisfb_post_300_rwtest(struct sis_video_info *ivideo, int iteration, int buswidth
 			int PseudoRankCapacity, int PseudoAdrPinCount,
 			unsigned int mapsize)
 {
-	SIS_IOTYPE1 *FBAddr = ivideo->video_vbase;
+	void __iomem *FBAddr = ivideo->video_vbase;
 	unsigned short sr14;
 	unsigned int k, RankCapacity, PageCapacity, BankNumHigh, BankNumMid;
 	unsigned int PhysicalAdrOtherPage, PhysicalAdrHigh, PhysicalAdrHalfPage;
@@ -5829,7 +5806,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ivideo->engineok = 0;
 
 	ivideo->sisfb_was_boot_device = 0;
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12))
+
 	if(pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW) {
 		if(ivideo->sisvga_enabled)
 			ivideo->sisfb_was_boot_device = 1;
@@ -5840,7 +5817,6 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 				"as the primary VGA device\n");
 		}
 	}
-#endif
 
 	ivideo->sisfb_parm_mem = sisfb_parm_mem;
 	ivideo->sisfb_accel = sisfb_accel;
@@ -6010,7 +5986,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ivideo->modeprechange = reg & 0x7f;
 	} else if(ivideo->sisvga_enabled) {
 #if defined(__i386__) || defined(__x86_64__)
-		unsigned char SIS_IOTYPE2 *tt = ioremap(0x400, 0x100);
+		unsigned char __iomem *tt = ioremap(0x400, 0x100);
 		if(tt) {
 			ivideo->modeprechange = readb(tt + 0x49);
 			iounmap(tt);
@@ -6503,7 +6479,7 @@ static struct pci_driver sisfb_driver = {
 	.remove 	= __devexit_p(sisfb_remove)
 };
 
-SISINITSTATIC int __init sisfb_init(void)
+static int __init sisfb_init(void)
 {
 #ifndef MODULE
 	char *options = NULL;
diff --git a/drivers/video/sis/sis_main.h b/drivers/video/sis/sis_main.h
index 3e3b7fa05d6..9540e977270 100644
--- a/drivers/video/sis/sis_main.h
+++ b/drivers/video/sis/sis_main.h
@@ -665,11 +665,11 @@ static struct _customttable {
 
 /* Interface used by the world */
 #ifndef MODULE
-SISINITSTATIC int sisfb_setup(char *options);
+static int sisfb_setup(char *options);
 #endif
 
 /* Interface to the low level console driver */
-SISINITSTATIC int sisfb_init(void);
+static int sisfb_init(void);
 
 /* fbdev routines */
 static int	sisfb_get_fix(struct fb_fix_screeninfo *fix, int con,
diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/sis/vgatypes.h
index b532fbd2b04..81a22eaabfd 100644
--- a/drivers/video/sis/vgatypes.h
+++ b/drivers/video/sis/vgatypes.h
@@ -53,10 +53,6 @@
 #ifndef _VGATYPES_H_
 #define _VGATYPES_H_
 
-#ifdef SIS_LINUX_KERNEL
-#include <linux/version.h>
-#endif
-
 #define SISIOMEMTYPE
 
 #ifdef SIS_LINUX_KERNEL
-- 
cgit v1.2.3


From b91dbce56a8dbf312f6255d5121b295553d2b4db Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <matthias@kaehlcke.net>
Date: Wed, 23 Jul 2008 21:31:14 -0700
Subject: pxafb: convert ctrlr_sem in a mutex

The semaphore ctrlr_sem is used as a mutex.  Convert it to the mutex API.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/pxafb.c | 7 ++++---
 drivers/video/pxafb.h | 2 +-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 5e8a140399f..2b707a8ce5d 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -41,6 +41,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/completion.h>
+#include <linux/mutex.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
@@ -1117,7 +1118,7 @@ static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
 {
 	u_int old_state;
 
-	down(&fbi->ctrlr_sem);
+	mutex_lock(&fbi->ctrlr_lock);
 
 	old_state = fbi->state;
 
@@ -1205,7 +1206,7 @@ static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
 		}
 		break;
 	}
-	up(&fbi->ctrlr_sem);
+	mutex_unlock(&fbi->ctrlr_lock);
 }
 
 /*
@@ -1458,7 +1459,7 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
 
 	init_waitqueue_head(&fbi->ctrlr_wait);
 	INIT_WORK(&fbi->task, pxafb_task);
-	init_MUTEX(&fbi->ctrlr_sem);
+	mutex_init(&fbi->ctrlr_lock);
 	init_completion(&fbi->disable_done);
 #ifdef CONFIG_FB_PXA_SMARTPANEL
 	init_completion(&fbi->command_done);
diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h
index 8238dc82642..31541b86f13 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/pxafb.h
@@ -106,7 +106,7 @@ struct pxafb_info {
 
 	volatile u_char		state;
 	volatile u_char		task_state;
-	struct semaphore	ctrlr_sem;
+	struct mutex		ctrlr_lock;
 	wait_queue_head_t	ctrlr_wait;
 	struct work_struct	task;
 
-- 
cgit v1.2.3


From 7951ac91c7d45b61f54f1cdabc24b52b40785de6 Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <matthias@kaehlcke.net>
Date: Wed, 23 Jul 2008 21:31:16 -0700
Subject: sa1100fb: convert ctrlr_sem in a mutex

The semaphore ctrlr_sem is used as a mutex.  Convert it to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/sa1100fb.c | 7 ++++---
 drivers/video/sa1100fb.h | 2 +-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 4a9f7e12180..78bcdbc3f48 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -175,6 +175,7 @@
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/mutex.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -1108,7 +1109,7 @@ static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state)
 {
 	u_int old_state;
 
-	down(&fbi->ctrlr_sem);
+	mutex_lock(&fbi->ctrlr_lock);
 
 	old_state = fbi->state;
 
@@ -1193,7 +1194,7 @@ static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state)
 		}
 		break;
 	}
-	up(&fbi->ctrlr_sem);
+	mutex_unlock(&fbi->ctrlr_lock);
 }
 
 /*
@@ -1445,7 +1446,7 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
 
 	init_waitqueue_head(&fbi->ctrlr_wait);
 	INIT_WORK(&fbi->task, sa1100fb_task);
-	init_MUTEX(&fbi->ctrlr_sem);
+	mutex_init(&fbi->ctrlr_lock);
 
 	return fbi;
 }
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index f465b27ed86..86831db9a04 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -100,7 +100,7 @@ struct sa1100fb_info {
 
 	volatile u_char		state;
 	volatile u_char		task_state;
-	struct semaphore	ctrlr_sem;
+	struct mutex		ctrlr_lock;
 	wait_queue_head_t	ctrlr_wait;
 	struct work_struct	task;
 
-- 
cgit v1.2.3


From fcea8030b3c2e71ad89f080901c63a04f07881c8 Mon Sep 17 00:00:00 2001
From: Tony Breeds <tony@bakeyournoodle.com>
Date: Wed, 23 Jul 2008 21:31:16 -0700
Subject: drivers/video/aty/radeon_base.c: notify user if
 sysfs_create_bin_file() failed

Current kernel builds warn about:
drivers/video/aty/radeon_base.c: In function 'radeonfb_pci_register':
drivers/video/aty/radeon_base.c:2334: warning: ignoring return value of 'sysfs_create_bin_file', declared with attribute warn_unused_result
drivers/video/aty/radeon_base.c:2336: warning: ignoring return value of 'sysfs_create_bin_file', declared with attribute warn_unused_result

Do minimal checking of these functions and issue a warning if either
fails.  They don't seem to be critical..

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/aty/radeon_base.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 400e9264e45..3c0a03f69d8 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2161,6 +2161,7 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
 	struct radeonfb_info *rinfo;
 	int ret;
 	unsigned char c1, c2;
+	int err = 0;
 
 	pr_debug("radeonfb_pci_register BEGIN\n");
 	
@@ -2340,9 +2341,14 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
 
 	/* Register some sysfs stuff (should be done better) */
 	if (rinfo->mon1_EDID)
-		sysfs_create_bin_file(&rinfo->pdev->dev.kobj, &edid1_attr);
+		err |= sysfs_create_bin_file(&rinfo->pdev->dev.kobj,
+						&edid1_attr);
 	if (rinfo->mon2_EDID)
-		sysfs_create_bin_file(&rinfo->pdev->dev.kobj, &edid2_attr);
+		err |= sysfs_create_bin_file(&rinfo->pdev->dev.kobj,
+						&edid2_attr);
+	if (err)
+		pr_warning("%s() Creating sysfs files failed, continuing\n",
+			   __func__);
 
 	/* save current mode regs before we switch into the new one
 	 * so we can restore this upon __exit
-- 
cgit v1.2.3


From 816664f88707b03fde24fb09759d569ed42406cb Mon Sep 17 00:00:00 2001
From: Roel Kluin <12o3l@tiscali.nl>
Date: Wed, 23 Jul 2008 21:31:17 -0700
Subject: aty128fb: test below 0 on unsigned pll->post_divider

pll->post_divider is unsigned, so the test fails

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/aty/aty128fb.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 07b6addbb3c..243ea4ab20c 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1339,10 +1339,8 @@ static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll,
 	if (vclk * 12 < c.ppll_min)
 		vclk = c.ppll_min/12;
 
-	pll->post_divider = -1;
-
 	/* now, find an acceptable divider */
-	for (i = 0; i < sizeof(post_dividers); i++) {
+	for (i = 0; i < ARRAY_SIZE(post_dividers); i++) {
 		output_freq = post_dividers[i] * vclk;
 		if (output_freq >= c.ppll_min && output_freq <= c.ppll_max) {
 			pll->post_divider = post_dividers[i];
@@ -1350,7 +1348,7 @@ static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll,
 		}
 	}
 
-	if (pll->post_divider < 0)
+	if (i == ARRAY_SIZE(post_dividers))
 		return -EINVAL;
 
 	/* calculate feedback divider */
-- 
cgit v1.2.3


From 091c82c01295719d47b89b38d24e41ad2066ead8 Mon Sep 17 00:00:00 2001
From: Roel Kluin <12o3l@tiscali.nl>
Date: Wed, 23 Jul 2008 21:31:18 -0700
Subject: amifb: test virtual screen range before subtraction on unsigned

dx and dy are u32's, so the test should occur before the subtraction

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/amifb.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index 45c154ade9c..0c549aa1cf8 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -2048,13 +2048,16 @@ static void amifb_copyarea(struct fb_info *info,
 	width = x2 - dx;
 	height = y2 - dy;
 
+	if (area->sx + dx < area->dx || area->sy + dy < area->dy)
+		return;
+
 	/* update sx,sy */
 	sx = area->sx + (dx - area->dx);
 	sy = area->sy + (dy - area->dy);
 
 	/* the source must be completely inside the virtual screen */
-	if (sx < 0 || sy < 0 || (sx + width) > info->var.xres_virtual ||
-	    (sy + height) > info->var.yres_virtual)
+	if (sx + width > info->var.xres_virtual ||
+			sy + height > info->var.yres_virtual)
 		return;
 
 	if (dy > sy || (dy == sy && dx > sx)) {
-- 
cgit v1.2.3


From 1c0face9d4024bf942096297937759bdf0e1aeac Mon Sep 17 00:00:00 2001
From: Roel Kluin <12o3l@tiscali.nl>
Date: Wed, 23 Jul 2008 21:31:18 -0700
Subject: atafb: test virtual screen range before subtraction on unsigned

dx and dy are u32's, so the test should occur before the subtraction

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Tim Schmielau <tim@physik3.uni-rostock.de>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/atafb.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index fa55d356b53..77eb8b34fbf 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -2593,13 +2593,16 @@ static void atafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 	width = x2 - dx;
 	height = y2 - dy;
 
+	if (area->sx + dx < area->dx || area->sy + dy < area->dy)
+		return;
+
 	/* update sx,sy */
 	sx = area->sx + (dx - area->dx);
 	sy = area->sy + (dy - area->dy);
 
 	/* the source must be completely inside the virtual screen */
-	if (sx < 0 || sy < 0 || (sx + width) > info->var.xres_virtual ||
-	    (sy + height) > info->var.yres_virtual)
+	if (sx + width > info->var.xres_virtual ||
+			sy + height > info->var.yres_virtual)
 		return;
 
 	if (dy > sy || (dy == sy && dx > sx)) {
-- 
cgit v1.2.3


From 77a6e7abb09de0e85a15e2fe42c21ffc59847759 Mon Sep 17 00:00:00 2001
From: Roel Kluin <12o3l@tiscali.nl>
Date: Wed, 23 Jul 2008 21:31:19 -0700
Subject: vga16fb: test virtual screen range before subtraction on unsigned

dx and dy are u32's, so the test should occur before the subtraction

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/vga16fb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 9b3c5923365..9d275171789 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -1087,12 +1087,15 @@ static void vga16fb_copyarea(struct fb_info *info, const struct fb_copyarea *are
 	width = x2 - dx;
 	height = y2 - dy;
 
+	if (sx + dx < old_dx || sy + dy < old_dy)
+		return;
+
 	/* update sx1,sy1 */
 	sx += (dx - old_dx);
 	sy += (dy - old_dy);
 
 	/* the source must be completely inside the virtual screen */
-	if (sx < 0 || sy < 0 || (sx + width) > vxres || (sy + height) > vyres)
+	if (sx + width > vxres || sy + height > vyres)
 		return;
 
 	switch (info->fix.type) {
-- 
cgit v1.2.3


From d22579b837358cbef12ccca5adaf7e93ae09ab7a Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 23 Jul 2008 21:31:20 -0700
Subject: atmel_lcdfb: FIFO underflow management

Manage atmel_lcdfb FIFO underflow

Resetting the LCD and DMA allows to fix screen shifting after a FIFO
underflow.  It follows reset sequence from errata "LCD Screen Shifting
After a Reset".

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/atmel_lcdfb.c | 57 ++++++++++++++++++++++++++++++++++++++++++++-
 include/video/atmel_lcdc.h  |  1 +
 2 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index b004036d408..d335bb96b03 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -379,6 +379,35 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 	return 0;
 }
 
+/*
+ * LCD reset sequence
+ */
+static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
+{
+	might_sleep();
+
+	/* LCD power off */
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+	/* wait for the LCDC core to become idle */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+		msleep(10);
+
+	/* DMA disable */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+
+	/* wait for DMA engine to become idle */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+		msleep(10);
+
+	/* LCD power on */
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+
+	/* DMA enable */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+}
+
 /**
  *      atmel_lcdfb_set_par - Alters the hardware state.
  *      @info: frame buffer structure that represents a single frame buffer
@@ -401,6 +430,8 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 	unsigned long clk_value_khz;
 	unsigned long bits_per_line;
 
+	might_sleep();
+
 	dev_dbg(info->device, "%s:\n", __func__);
 	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
 		 info->var.xres, info->var.yres,
@@ -511,6 +542,8 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 
 	/* Disable all interrupts */
 	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+	/* Enable FIFO & DMA errors */
+	lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
 
 	/* ...wait for DMA engine to become idle... */
 	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
@@ -645,10 +678,26 @@ static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
 	u32 status;
 
 	status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
-	lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
+	if (status & ATMEL_LCDC_UFLWI) {
+		dev_warn(info->device, "FIFO underflow %#x\n", status);
+		/* reset DMA and FIFO to avoid screen shifting */
+		schedule_work(&sinfo->task);
+	}
+	lcdc_writel(sinfo, ATMEL_LCDC_ICR, status);
 	return IRQ_HANDLED;
 }
 
+/*
+ * LCD controller task (to reset the LCD)
+ */
+static void atmel_lcdfb_task(struct work_struct *work)
+{
+	struct atmel_lcdfb_info *sinfo =
+		container_of(work, struct atmel_lcdfb_info, task);
+
+	atmel_lcdfb_reset(sinfo);
+}
+
 static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
 {
 	struct fb_info *info = sinfo->info;
@@ -824,6 +873,10 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 		goto unmap_mmio;
 	}
 
+	/* Some operations on the LCDC might sleep and
+	 * require a preemptible task context */
+	INIT_WORK(&sinfo->task, atmel_lcdfb_task);
+
 	ret = atmel_lcdfb_init_fbinfo(sinfo);
 	if (ret < 0) {
 		dev_err(dev, "init fbinfo failed: %d\n", ret);
@@ -866,6 +919,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 free_cmap:
 	fb_dealloc_cmap(&info->cmap);
 unregister_irqs:
+	cancel_work_sync(&sinfo->task);
 	free_irq(sinfo->irq_base, info);
 unmap_mmio:
 	exit_backlight(sinfo);
@@ -903,6 +957,7 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
 	if (!sinfo)
 		return 0;
 
+	cancel_work_sync(&sinfo->task);
 	exit_backlight(sinfo);
 	if (sinfo->atmel_lcdfb_power_control)
 		sinfo->atmel_lcdfb_power_control(0);
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index ed64862c4e1..1ccf462b433 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -37,6 +37,7 @@ struct atmel_lcdfb_info {
 	struct fb_info		*info;
 	void __iomem		*mmio;
 	unsigned long		irq_base;
+	struct work_struct	task;
 
 	unsigned int		guard_time;
 	struct platform_device	*pdev;
-- 
cgit v1.2.3


From 49a1d28f57adc9cb064572f0373e26363b0a412f Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:21 -0700
Subject: fbcon: make logo_height a local variable

Make logo_height variable local in the only function it is used.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/console/fbcon.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 4be3b46c069..3ccfa76d9b2 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -107,9 +107,7 @@ static struct display fb_display[MAX_NR_CONSOLES];
 
 static signed char con2fb_map[MAX_NR_CONSOLES];
 static signed char con2fb_map_boot[MAX_NR_CONSOLES];
-#ifndef MODULE
-static int logo_height;
-#endif
+
 static int logo_lines;
 /* logo_shown is an index to vc_cons when >= 0; otherwise follows FBCON_LOGO
    enums.  */
@@ -607,6 +605,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
 	struct fbcon_ops *ops = info->fbcon_par;
 	int cnt, erase = vc->vc_video_erase_char, step;
 	unsigned short *save = NULL, *r, *q;
+	int logo_height;
 
 	if (info->flags & FBINFO_MODULE) {
 		logo_shown = FBCON_LOGO_DONTSHOW;
-- 
cgit v1.2.3


From 012e26096b36bfeacaba2c9e31eaf32d6faa6567 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:21 -0700
Subject: uvesafb: change mode parameter to mode_option

Make more drivers use the "mode_option" parameter.  This one is quite new
so drop the old "mode" parameter before someone starts using it seriously.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/uvesafb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index cdbb56edb6c..50744229c7a 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -2054,8 +2054,8 @@ MODULE_PARM_DESC(maxhf,
 module_param(maxvf, ushort, 0);
 MODULE_PARM_DESC(maxvf,
 	"Maximum vertical frequency [Hz], overrides EDID data");
-module_param_named(mode, mode_option, charp, 0);
-MODULE_PARM_DESC(mode,
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option,
 	"Specify initial video mode as \"<xres>x<yres>[-<bpp>][@<refresh>]\"");
 module_param(vbemode, ushort, 0);
 MODULE_PARM_DESC(vbemode,
-- 
cgit v1.2.3


From a90ed92ed852a3d4b8a6f20b10bba771997f5ede Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:22 -0700
Subject: tridentfb: documentation update

Make the tridentfb documentation closer to current state of the tridentfb
driver.  Fix also some formatting.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/fb/tridentfb.txt | 46 ++++++++++++++++++++++++++++--------------
 1 file changed, 31 insertions(+), 15 deletions(-)

diff --git a/Documentation/fb/tridentfb.txt b/Documentation/fb/tridentfb.txt
index 8a6c8a43e6a..45d9de5b13a 100644
--- a/Documentation/fb/tridentfb.txt
+++ b/Documentation/fb/tridentfb.txt
@@ -3,11 +3,25 @@ Tridentfb is a framebuffer driver for some Trident chip based cards.
 The following list of chips is thought to be supported although not all are
 tested:
 
-those from the Image series with Cyber in their names - accelerated
-those with Blade in their names (Blade3D,CyberBlade...) - accelerated
-the newer CyberBladeXP family  - nonaccelerated
-
-Only PCI/AGP based cards are supported, none of the older Tridents.
+those from the TGUI series 9440/96XX and with Cyber in their names
+those from the Image series and with Cyber in their names
+those with Blade in their names (Blade3D,CyberBlade...)
+the newer CyberBladeXP family
+
+All families are accelerated. Only PCI/AGP based cards are supported,
+none of the older Tridents.
+The driver supports 8, 16 and 32 bits per pixel depths.
+The TGUI family requires a line length to be power of 2 if acceleration
+is enabled. This means that range of possible resolutions and bpp is
+limited comparing to the range if acceleration is disabled (see list
+of parameters below).
+
+Known bugs:
+1. The driver randomly locks up on 3DImage975 chip with acceleration
+   enabled. The same happens in X11 (Xorg).
+2. The ramdac speeds require some more fine tuning. It is possible to
+   switch resolution which the chip does not support at some depths for
+   older chips.
 
 How to use it?
 ==============
@@ -17,12 +31,11 @@ video=tridentfb
 
 The parameters for tridentfb are concatenated with a ':' as in this example.
 
-video=tridentfb:800x600,bpp=16,noaccel
+video=tridentfb:800x600-16@75,noaccel
 
 The second level parameters that tridentfb understands are:
 
 noaccel - turns off acceleration (when it doesn't work for your card)
-accel - force text acceleration (for boards which by default are noacceled)
 
 fp	- use flat panel related stuff
 crt 	- assume monitor is present instead of fp
@@ -31,21 +44,24 @@ center 	- for flat panels and resolutions smaller than native size center the
 	  image, otherwise use
 stretch
 
-memsize - integer value in Kb, use if your card's memory size is misdetected.
+memsize - integer value in KB, use if your card's memory size is misdetected.
 	  look at the driver output to see what it says when initializing.
-memdiff - integer value in Kb,should be nonzero if your card reports
-	  more memory than it actually has.For instance mine is 192K less than
+
+memdiff - integer value in KB, should be nonzero if your card reports
+	  more memory than it actually has. For instance mine is 192K less than
 	  detection says in all three BIOS selectable situations 2M, 4M, 8M.
 	  Only use if your video memory is taken from main memory hence of
-	  configurable size.Otherwise use memsize.
-	  If in some modes which barely fit the memory you see garbage at the bottom
-	  this might help by not letting change to that mode anymore.
+	  configurable size. Otherwise use memsize.
+	  If in some modes which barely fit the memory you see garbage
+	  at the bottom this might help by not letting change to that mode
+	  anymore.
 
 nativex - the width in pixels of the flat panel.If you know it (usually 1024
 	  800 or 1280) and it is not what the driver seems to detect use it.
 
-bpp  - bits per pixel (8,16 or 32)
-mode - a mode name like 800x600 (as described in Documentation/fb/modedb.txt)
+bpp	- bits per pixel (8,16 or 32)
+mode	- a mode name like 800x600-8@75 as described in
+	  Documentation/fb/modedb.txt
 
 Using insane values for the above parameters will probably result in driver
 misbehaviour so take care(for instance memsize=12345678 or memdiff=23784 or
-- 
cgit v1.2.3


From ea9014bcacf236124d5e0ff971838049a98456cb Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:22 -0700
Subject: tdfxfb: add mode_option module parameter

Small step toward unification of mode setting parameter.  This is required
to fix the Bugzilla's bug 9847

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tdfxfb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index ea9f19d2559..67664252868 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -1426,6 +1426,8 @@ MODULE_LICENSE("GPL");
 module_param(hwcursor, int, 0644);
 MODULE_PARM_DESC(hwcursor, "Enable hardware cursor "
 			"(1=enable, 0=disable, default=1)");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
 #ifdef CONFIG_MTRR
 module_param(nomtrr, bool, 0);
 MODULE_PARM_DESC(nomtrr, "Disable MTRR support (default: enabled)");
-- 
cgit v1.2.3


From 98219374d9ed2d257e56e8e1fcd9d16a083397bb Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:23 -0700
Subject: vga16fb: source code improvement

Use constants and functions from the vga.h file.  Also add module
description.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/vga16fb.c | 117 ++++++++++++++++--------------------------------
 1 file changed, 39 insertions(+), 78 deletions(-)

diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 9d275171789..e31bca8a0cb 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -26,18 +26,6 @@
 #include <asm/io.h>
 #include <video/vga.h>
 
-#define GRAPHICS_ADDR_REG VGA_GFX_I	/* Graphics address register. */
-#define GRAPHICS_DATA_REG VGA_GFX_D	/* Graphics data register. */
-
-#define SET_RESET_INDEX 	VGA_GFX_SR_VALUE	/* Set/Reset Register index. */
-#define ENABLE_SET_RESET_INDEX	VGA_GFX_SR_ENABLE	/* Enable Set/Reset Register index. */
-#define DATA_ROTATE_INDEX	VGA_GFX_DATA_ROTATE	/* Data Rotate Register index. */
-#define GRAPHICS_MODE_INDEX	VGA_GFX_MODE		/* Graphics Mode Register index. */
-#define BIT_MASK_INDEX		VGA_GFX_BIT_MASK	/* Bit Mask Register index. */
-
-#define dac_reg	(VGA_PEL_IW)
-#define dac_val	(VGA_PEL_D)
-
 #define VGA_FB_PHYS 0xA0000
 #define VGA_FB_PHYS_LEN 65536
 
@@ -108,7 +96,7 @@ static struct fb_fix_screeninfo vga16fb_fix __initdata = {
 	.visual		= FB_VISUAL_PSEUDOCOLOR,
 	.xpanstep	= 8,
 	.ypanstep	= 1,
-	.line_length	= 640/8,
+	.line_length	= 640 / 8,
 	.accel		= FB_ACCEL_NONE
 };
 
@@ -135,23 +123,22 @@ static inline int setmode(int mode)
 {
 	int oldmode;
 	
-	vga_io_w(GRAPHICS_ADDR_REG, GRAPHICS_MODE_INDEX);
-	oldmode = vga_io_r(GRAPHICS_DATA_REG);
-	vga_io_w(GRAPHICS_DATA_REG, mode);
+	oldmode = vga_io_rgfx(VGA_GFX_MODE);
+	vga_io_w(VGA_GFX_D, mode);
 	return oldmode;
 }
 
 /* Select the Bit Mask Register and return its value. */
 static inline int selectmask(void)
 {
-	return vga_io_rgfx(BIT_MASK_INDEX);
+	return vga_io_rgfx(VGA_GFX_BIT_MASK);
 }
 
 /* Set the value of the Bit Mask Register.  It must already have been
    selected with selectmask(). */
 static inline void setmask(int mask)
 {
-	vga_io_w(GRAPHICS_DATA_REG, mask);
+	vga_io_w(VGA_GFX_D, mask);
 }
 
 /* Set the Data Rotate Register and return its old value. 
@@ -161,9 +148,8 @@ static inline int setop(int op)
 {
 	int oldop;
 	
-	vga_io_w(GRAPHICS_ADDR_REG, DATA_ROTATE_INDEX);
-	oldop = vga_io_r(GRAPHICS_DATA_REG);
-	vga_io_w(GRAPHICS_DATA_REG, op);
+	oldop = vga_io_rgfx(VGA_GFX_DATA_ROTATE);
+	vga_io_w(VGA_GFX_D, op);
 	return oldop;
 }
 
@@ -173,9 +159,8 @@ static inline int setsr(int sr)
 {
 	int oldsr;
 
-	vga_io_w(GRAPHICS_ADDR_REG, ENABLE_SET_RESET_INDEX);
-	oldsr = vga_io_r(GRAPHICS_DATA_REG);
-	vga_io_w(GRAPHICS_DATA_REG, sr);
+	oldsr = vga_io_rgfx(VGA_GFX_SR_ENABLE);
+	vga_io_w(VGA_GFX_D, sr);
 	return oldsr;
 }
 
@@ -184,22 +169,21 @@ static inline int setcolor(int color)
 {
 	int oldcolor;
 
-	vga_io_w(GRAPHICS_ADDR_REG, SET_RESET_INDEX);
-	oldcolor = vga_io_r(GRAPHICS_DATA_REG);
-	vga_io_w(GRAPHICS_DATA_REG, color);
+	oldcolor = vga_io_rgfx(VGA_GFX_SR_VALUE);
+	vga_io_w(VGA_GFX_D, color);
 	return oldcolor;
 }
 
 /* Return the value in the Graphics Address Register. */
 static inline int getindex(void)
 {
-	return vga_io_r(GRAPHICS_ADDR_REG);
+	return vga_io_r(VGA_GFX_I);
 }
 
 /* Set the value in the Graphics Address Register. */
 static inline void setindex(int index)
 {
-	vga_io_w(GRAPHICS_ADDR_REG, index);
+	vga_io_w(VGA_GFX_I, index);
 }
 
 static void vga16fb_pan_var(struct fb_info *info, 
@@ -672,10 +656,10 @@ static void ega16_setpalette(int regno, unsigned red, unsigned green, unsigned b
 
 static void vga16_setpalette(int regno, unsigned red, unsigned green, unsigned blue)
 {
-	outb(regno,       dac_reg);
-	outb(red   >> 10, dac_val);
-	outb(green >> 10, dac_val);
-	outb(blue  >> 10, dac_val);
+	outb(regno,       VGA_PEL_IW);
+	outb(red   >> 10, VGA_PEL_D);
+	outb(green >> 10, VGA_PEL_D);
+	outb(blue  >> 10, VGA_PEL_D);
 }
 
 static int vga16fb_setcolreg(unsigned regno, unsigned red, unsigned green,
@@ -719,28 +703,15 @@ static int vga16fb_pan_display(struct fb_var_screeninfo *var,
    blanking code was originally by Huang shi chao, and modified by
    Christoph Rimek (chrimek@toppoint.de) and todd j. derr
    (tjd@barefoot.org) for Linux. */
-#define attrib_port		VGA_ATC_IW
-#define seq_port_reg		VGA_SEQ_I
-#define seq_port_val		VGA_SEQ_D
-#define gr_port_reg		VGA_GFX_I
-#define gr_port_val		VGA_GFX_D
-#define video_misc_rd		VGA_MIS_R
-#define video_misc_wr		VGA_MIS_W
-#define vga_video_port_reg	VGA_CRT_IC
-#define vga_video_port_val	VGA_CRT_DC
 
 static void vga_vesa_blank(struct vga16fb_par *par, int mode)
 {
-	unsigned char SeqCtrlIndex;
-	unsigned char CrtCtrlIndex;
+	unsigned char SeqCtrlIndex = vga_io_r(VGA_SEQ_I);
+	unsigned char CrtCtrlIndex = vga_io_r(VGA_CRT_IC);
 	
-	//cli();
-	SeqCtrlIndex = vga_io_r(seq_port_reg);
-	CrtCtrlIndex = vga_io_r(vga_video_port_reg);
-
 	/* save original values of VGA controller registers */
 	if(!par->vesa_blanked) {
-		par->vga_state.CrtMiscIO = vga_io_r(video_misc_rd);
+		par->vga_state.CrtMiscIO = vga_io_r(VGA_MIS_R);
 		//sti();
 
 		par->vga_state.HorizontalTotal = vga_io_rcrt(0x00);	/* HorizontalTotal */
@@ -756,12 +727,11 @@ static void vga_vesa_blank(struct vga16fb_par *par, int mode)
 
 	/* assure that video is enabled */
 	/* "0x20" is VIDEO_ENABLE_bit in register 01 of sequencer */
-	//cli();
 	vga_io_wseq(0x01, par->vga_state.ClockingMode | 0x20);
 
 	/* test for vertical retrace in process.... */
 	if ((par->vga_state.CrtMiscIO & 0x80) == 0x80)
-		vga_io_w(video_misc_wr, par->vga_state.CrtMiscIO & 0xef);
+		vga_io_w(VGA_MIS_W, par->vga_state.CrtMiscIO & 0xef);
 
 	/*
 	 * Set <End of vertical retrace> to minimum (0) and
@@ -769,12 +739,10 @@ static void vga_vesa_blank(struct vga16fb_par *par, int mode)
 	 * Result: turn off vertical sync (VSync) pulse.
 	 */
 	if (mode & FB_BLANK_VSYNC_SUSPEND) {
-		outb_p(0x10,vga_video_port_reg);	/* StartVertRetrace */
-		outb_p(0xff,vga_video_port_val); 	/* maximum value */
-		outb_p(0x11,vga_video_port_reg);	/* EndVertRetrace */
-		outb_p(0x40,vga_video_port_val);	/* minimum (bits 0..3)  */
-		outb_p(0x07,vga_video_port_reg);	/* Overflow */
-		outb_p(par->vga_state.Overflow | 0x84,vga_video_port_val); /* bits 9,10 of vert. retrace */
+		vga_io_wcrt(VGA_CRTC_V_SYNC_START, 0xff);
+		vga_io_wcrt(VGA_CRTC_V_SYNC_END, 0x40);
+		/* bits 9,10 of vert. retrace */
+		vga_io_wcrt(VGA_CRTC_OVERFLOW, par->vga_state.Overflow | 0x84);
 	}
 
 	if (mode & FB_BLANK_HSYNC_SUSPEND) {
@@ -783,29 +751,22 @@ static void vga_vesa_blank(struct vga16fb_par *par, int mode)
 		 *  <Start of horizontal Retrace> to maximum
 		 * Result: turn off horizontal sync (HSync) pulse.
 		 */
-		outb_p(0x04,vga_video_port_reg);	/* StartHorizRetrace */
-		outb_p(0xff,vga_video_port_val);	/* maximum */
-		outb_p(0x05,vga_video_port_reg);	/* EndHorizRetrace */
-		outb_p(0x00,vga_video_port_val);	/* minimum (0) */
+		vga_io_wcrt(VGA_CRTC_H_SYNC_START, 0xff);
+		vga_io_wcrt(VGA_CRTC_H_SYNC_END, 0x00);
 	}
 
 	/* restore both index registers */
-	outb_p(SeqCtrlIndex,seq_port_reg);
-	outb_p(CrtCtrlIndex,vga_video_port_reg);
-	//sti();
+	outb_p(SeqCtrlIndex, VGA_SEQ_I);
+	outb_p(CrtCtrlIndex, VGA_CRT_IC);
 }
 
 static void vga_vesa_unblank(struct vga16fb_par *par)
 {
-	unsigned char SeqCtrlIndex;
-	unsigned char CrtCtrlIndex;
+	unsigned char SeqCtrlIndex = vga_io_r(VGA_SEQ_I);
+	unsigned char CrtCtrlIndex = vga_io_r(VGA_CRT_IC);
 	
-	//cli();
-	SeqCtrlIndex = vga_io_r(seq_port_reg);
-	CrtCtrlIndex = vga_io_r(vga_video_port_reg);
-
 	/* restore original values of VGA controller registers */
-	vga_io_w(video_misc_wr, par->vga_state.CrtMiscIO);
+	vga_io_w(VGA_MIS_W, par->vga_state.CrtMiscIO);
 
 	/* HorizontalTotal */
 	vga_io_wcrt(0x00, par->vga_state.HorizontalTotal);
@@ -827,9 +788,8 @@ static void vga_vesa_unblank(struct vga16fb_par *par)
 	vga_io_wseq(0x01, par->vga_state.ClockingMode);
 
 	/* restore index/control registers */
-	vga_io_w(seq_port_reg, SeqCtrlIndex);
-	vga_io_w(vga_video_port_reg, CrtCtrlIndex);
-	//sti();
+	vga_io_w(VGA_SEQ_I, SeqCtrlIndex);
+	vga_io_w(VGA_CRT_IC, CrtCtrlIndex);
 }
 
 static void vga_pal_blank(void)
@@ -837,10 +797,10 @@ static void vga_pal_blank(void)
 	int i;
 
 	for (i=0; i<16; i++) {
-		outb_p (i, dac_reg) ;
-		outb_p (0, dac_val) ;
-		outb_p (0, dac_val) ;
-		outb_p (0, dac_val) ;
+		outb_p(i, VGA_PEL_IW);
+		outb_p(0, VGA_PEL_D);
+		outb_p(0, VGA_PEL_D);
+		outb_p(0, VGA_PEL_D);
 	}
 }
 
@@ -1485,6 +1445,7 @@ static void __exit vga16fb_exit(void)
 	platform_driver_unregister(&vga16fb_driver);
 }
 
+MODULE_DESCRIPTION("Legacy VGA framebuffer device driver");
 MODULE_LICENSE("GPL");
 module_init(vga16fb_init);
 module_exit(vga16fb_exit);
-- 
cgit v1.2.3


From c2c12155cf05bf3e25eeae5711beffc634505400 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:24 -0700
Subject: tdfxfb: remove ypan checks done by a higher layer

These checks and assignments are done by a higher layer so remove them
from the driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tdfxfb.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 67664252868..77aafcfae03 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -836,16 +836,12 @@ static int tdfxfb_pan_display(struct fb_var_screeninfo *var,
 	struct tdfx_par *par = info->par;
 	u32 addr = var->yoffset * info->fix.line_length;
 
-	if (nopan || var->xoffset || (var->yoffset > var->yres_virtual))
-		return -EINVAL;
-	if ((var->yoffset + var->yres > var->yres_virtual && nowrap))
+	if (nopan || var->xoffset)
 		return -EINVAL;
 
 	banshee_make_room(par, 1);
 	tdfx_outl(par, VIDDESKSTART, addr);
 
-	info->var.xoffset = var->xoffset;
-	info->var.yoffset = var->yoffset;
 	return 0;
 }
 
-- 
cgit v1.2.3


From cfb4f5d1750e05f43902197713c50c29e7dfbc99 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Wed, 23 Jul 2008 21:31:24 -0700
Subject: fbdev: SuperH Mobile LCDC Driver

This is the SuperH Mobile LCDC frame buffer driver V2, adding support for
the LCDC block found in SuperH Mobile processors.  The hardware supports
up to two LCD panels per LCDC block, and both RGB and SYS interfaces can
be used to hook up LCD panels/modules.

The device driver is a regular platform driver, so LCD configuration and
board specific hooks are passed to the driver using platform data.  LCD
modules using SYS interface often require special configuration using the
SYS bus, and to solve this cleanly the driver provides SYS interface
operations to the board code.

Tested on sh7723 and sh7722 processors with a SYS16A QVGA panel and WVGA
panels using RGB16 and RGB18 interfaces.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/Kconfig            |  10 +
 drivers/video/Makefile           |   2 +
 drivers/video/sh_mobile_lcdcfb.c | 725 +++++++++++++++++++++++++++++++++++++++
 include/asm-sh/sh_mobile_lcdc.h  |  66 ++++
 4 files changed, 803 insertions(+)
 create mode 100644 drivers/video/sh_mobile_lcdcfb.c
 create mode 100644 include/asm-sh/sh_mobile_lcdc.h

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7072d2c5a04..80fa066416b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1866,6 +1866,16 @@ config FB_W100
 
 	  If unsure, say N.
 
+config FB_SH_MOBILE_LCDC
+	tristate "SuperH Mobile LCDC framebuffer support"
+	depends on FB && SUPERH
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	default m
+	---help---
+	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
+
 config FB_S3C2410
 	tristate "S3C2410 LCD framebuffer support"
 	depends on FB && ARCH_S3C2410
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 7ee85c0d2e5..4809f8b9bb2 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -115,6 +115,8 @@ obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
 obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
+obj-$(CONFIG_FB_SH7343VOU)	  += sh7343_voufb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
new file mode 100644
index 00000000000..f6ef6cca73c
--- /dev/null
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -0,0 +1,725 @@
+/*
+ * SuperH Mobile LCDC Framebuffer
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <asm/sh_mobile_lcdc.h>
+
+#define PALETTE_NR 16
+
+struct sh_mobile_lcdc_priv;
+struct sh_mobile_lcdc_chan {
+	struct sh_mobile_lcdc_priv *lcdc;
+	unsigned long *reg_offs;
+	unsigned long ldmt1r_value;
+	unsigned long enabled; /* ME and SE in LDCNT2R */
+	struct sh_mobile_lcdc_chan_cfg cfg;
+	u32 pseudo_palette[PALETTE_NR];
+	struct fb_info info;
+	dma_addr_t dma_handle;
+};
+
+struct sh_mobile_lcdc_priv {
+	void __iomem *base;
+	struct clk *clk;
+	unsigned long lddckr;
+	struct sh_mobile_lcdc_chan ch[2];
+};
+
+/* shared registers */
+#define _LDDCKR 0x410
+#define _LDDCKSTPR 0x414
+#define _LDINTR 0x468
+#define _LDSR 0x46c
+#define _LDCNT1R 0x470
+#define _LDCNT2R 0x474
+#define _LDDDSR 0x47c
+#define _LDDWD0R 0x800
+#define _LDDRDR 0x840
+#define _LDDWAR 0x900
+#define _LDDRAR 0x904
+
+/* per-channel registers */
+enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
+       LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR };
+
+static unsigned long lcdc_offs_mainlcd[] = {
+	[LDDCKPAT1R] = 0x400,
+	[LDDCKPAT2R] = 0x404,
+	[LDMT1R] = 0x418,
+	[LDMT2R] = 0x41c,
+	[LDMT3R] = 0x420,
+	[LDDFR] = 0x424,
+	[LDSM1R] = 0x428,
+	[LDSA1R] = 0x430,
+	[LDMLSR] = 0x438,
+	[LDHCNR] = 0x448,
+	[LDHSYNR] = 0x44c,
+	[LDVLNR] = 0x450,
+	[LDVSYNR] = 0x454,
+	[LDPMR] = 0x460,
+};
+
+static unsigned long lcdc_offs_sublcd[] = {
+	[LDDCKPAT1R] = 0x408,
+	[LDDCKPAT2R] = 0x40c,
+	[LDMT1R] = 0x600,
+	[LDMT2R] = 0x604,
+	[LDMT3R] = 0x608,
+	[LDDFR] = 0x60c,
+	[LDSM1R] = 0x610,
+	[LDSA1R] = 0x618,
+	[LDMLSR] = 0x620,
+	[LDHCNR] = 0x624,
+	[LDHSYNR] = 0x628,
+	[LDVLNR] = 0x62c,
+	[LDVSYNR] = 0x630,
+	[LDPMR] = 0x63c,
+};
+
+#define START_LCDC	0x00000001
+#define LCDC_RESET	0x00000100
+#define DISPLAY_BEU	0x00000008
+#define LCDC_ENABLE	0x00000001
+
+static void lcdc_write_chan(struct sh_mobile_lcdc_chan *chan,
+			    int reg_nr, unsigned long data)
+{
+	iowrite32(data, chan->lcdc->base + chan->reg_offs[reg_nr]);
+}
+
+static unsigned long lcdc_read_chan(struct sh_mobile_lcdc_chan *chan,
+				    int reg_nr)
+{
+	return ioread32(chan->lcdc->base + chan->reg_offs[reg_nr]);
+}
+
+static void lcdc_write(struct sh_mobile_lcdc_priv *priv,
+		       unsigned long reg_offs, unsigned long data)
+{
+	iowrite32(data, priv->base + reg_offs);
+}
+
+static unsigned long lcdc_read(struct sh_mobile_lcdc_priv *priv,
+			       unsigned long reg_offs)
+{
+	return ioread32(priv->base + reg_offs);
+}
+
+static void lcdc_wait_bit(struct sh_mobile_lcdc_priv *priv,
+			  unsigned long reg_offs,
+			  unsigned long mask, unsigned long until)
+{
+	while ((lcdc_read(priv, reg_offs) & mask) != until)
+		cpu_relax();
+}
+
+static int lcdc_chan_is_sublcd(struct sh_mobile_lcdc_chan *chan)
+{
+	return chan->cfg.chan == LCDC_CHAN_SUBLCD;
+}
+
+static void lcdc_sys_write_index(void *handle, unsigned long data)
+{
+	struct sh_mobile_lcdc_chan *ch = handle;
+
+	lcdc_write(ch->lcdc, _LDDWD0R, data | 0x10000000);
+	lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
+	lcdc_write(ch->lcdc, _LDDWAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+}
+
+static void lcdc_sys_write_data(void *handle, unsigned long data)
+{
+	struct sh_mobile_lcdc_chan *ch = handle;
+
+	lcdc_write(ch->lcdc, _LDDWD0R, data | 0x11000000);
+	lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
+	lcdc_write(ch->lcdc, _LDDWAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+}
+
+static unsigned long lcdc_sys_read_data(void *handle)
+{
+	struct sh_mobile_lcdc_chan *ch = handle;
+
+	lcdc_write(ch->lcdc, _LDDRDR, 0x01000000);
+	lcdc_wait_bit(ch->lcdc, _LDSR, 2, 0);
+	lcdc_write(ch->lcdc, _LDDRAR, 1 | (lcdc_chan_is_sublcd(ch) ? 2 : 0));
+	udelay(1);
+
+	return lcdc_read(ch->lcdc, _LDDRDR) & 0xffff;
+}
+
+struct sh_mobile_lcdc_sys_bus_ops sh_mobile_lcdc_sys_bus_ops = {
+	lcdc_sys_write_index,
+	lcdc_sys_write_data,
+	lcdc_sys_read_data,
+};
+
+static void sh_mobile_lcdc_start_stop(struct sh_mobile_lcdc_priv *priv,
+				      int start)
+{
+	unsigned long tmp = lcdc_read(priv, _LDCNT2R);
+	int k;
+
+	/* start or stop the lcdc */
+	if (start)
+		lcdc_write(priv, _LDCNT2R, tmp | START_LCDC);
+	else
+		lcdc_write(priv, _LDCNT2R, tmp & ~START_LCDC);
+
+	/* wait until power is applied/stopped on all channels */
+	for (k = 0; k < ARRAY_SIZE(priv->ch); k++)
+		if (lcdc_read(priv, _LDCNT2R) & priv->ch[k].enabled)
+			while (1) {
+				tmp = lcdc_read_chan(&priv->ch[k], LDPMR) & 3;
+				if (start && tmp == 3)
+					break;
+				if (!start && tmp == 0)
+					break;
+				cpu_relax();
+			}
+
+	if (!start)
+		lcdc_write(priv, _LDDCKSTPR, 1); /* stop dotclock */
+}
+
+static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
+{
+	struct sh_mobile_lcdc_chan *ch;
+	struct fb_videomode *lcd_cfg;
+	struct sh_mobile_lcdc_board_cfg	*board_cfg;
+	unsigned long tmp;
+	int k, m;
+	int ret = 0;
+
+	/* reset */
+	lcdc_write(priv, _LDCNT2R, lcdc_read(priv, _LDCNT2R) | LCDC_RESET);
+	lcdc_wait_bit(priv, _LDCNT2R, LCDC_RESET, 0);
+
+	/* enable LCDC channels */
+	tmp = lcdc_read(priv, _LDCNT2R);
+	tmp |= priv->ch[0].enabled;
+	tmp |= priv->ch[1].enabled;
+	lcdc_write(priv, _LDCNT2R, tmp);
+
+	/* read data from external memory, avoid using the BEU for now */
+	lcdc_write(priv, _LDCNT2R, lcdc_read(priv, _LDCNT2R) & ~DISPLAY_BEU);
+
+	/* stop the lcdc first */
+	sh_mobile_lcdc_start_stop(priv, 0);
+
+	/* configure clocks */
+	tmp = priv->lddckr;
+	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+		ch = &priv->ch[k];
+
+		if (!priv->ch[k].enabled)
+			continue;
+
+		m = ch->cfg.clock_divider;
+		if (!m)
+			continue;
+
+		if (m == 1)
+			m = 1 << 6;
+		tmp |= m << (lcdc_chan_is_sublcd(ch) ? 8 : 0);
+
+		lcdc_write_chan(ch, LDDCKPAT1R, 0x00000000);
+		lcdc_write_chan(ch, LDDCKPAT2R, (1 << (m/2)) - 1);
+	}
+
+	lcdc_write(priv, _LDDCKR, tmp);
+
+	/* start dotclock again */
+	lcdc_write(priv, _LDDCKSTPR, 0);
+	lcdc_wait_bit(priv, _LDDCKSTPR, ~0, 0);
+
+	/* interrupts are disabled */
+	lcdc_write(priv, _LDINTR, 0);
+
+	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+		ch = &priv->ch[k];
+		lcd_cfg = &ch->cfg.lcd_cfg;
+
+		if (!ch->enabled)
+			continue;
+
+		tmp = ch->ldmt1r_value;
+		tmp |= (lcd_cfg->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1 << 28;
+		tmp |= (lcd_cfg->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1 << 27;
+		lcdc_write_chan(ch, LDMT1R, tmp);
+
+		/* setup SYS bus */
+		lcdc_write_chan(ch, LDMT2R, ch->cfg.sys_bus_cfg.ldmt2r);
+		lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
+
+		/* horizontal configuration */
+		tmp = lcd_cfg->xres + lcd_cfg->hsync_len;
+		tmp += lcd_cfg->left_margin;
+		tmp += lcd_cfg->right_margin;
+		tmp /= 8; /* HTCN */
+		tmp |= (lcd_cfg->xres / 8) << 16; /* HDCN */
+		lcdc_write_chan(ch, LDHCNR, tmp);
+
+		tmp = lcd_cfg->xres;
+		tmp += lcd_cfg->right_margin;
+		tmp /= 8; /* HSYNP */
+		tmp |= (lcd_cfg->hsync_len / 8) << 16; /* HSYNW */
+		lcdc_write_chan(ch, LDHSYNR, tmp);
+
+		/* power supply */
+		lcdc_write_chan(ch, LDPMR, 0);
+
+		/* vertical configuration */
+		tmp = lcd_cfg->yres + lcd_cfg->vsync_len;
+		tmp += lcd_cfg->upper_margin;
+		tmp += lcd_cfg->lower_margin; /* VTLN */
+		tmp |= lcd_cfg->yres << 16; /* VDLN */
+		lcdc_write_chan(ch, LDVLNR, tmp);
+
+		tmp = lcd_cfg->yres;
+		tmp += lcd_cfg->lower_margin; /* VSYNP */
+		tmp |= lcd_cfg->vsync_len << 16; /* VSYNW */
+		lcdc_write_chan(ch, LDVSYNR, tmp);
+
+		board_cfg = &ch->cfg.board_cfg;
+		if (board_cfg->setup_sys)
+			ret = board_cfg->setup_sys(board_cfg->board_data, ch,
+						   &sh_mobile_lcdc_sys_bus_ops);
+		if (ret)
+			return ret;
+	}
+
+	/* --- display_lcdc_data() --- */
+	lcdc_write(priv, _LDINTR, 0x00000f00);
+
+	/* word and long word swap */
+	lcdc_write(priv, _LDDDSR, lcdc_read(priv, _LDDDSR) | 6);
+
+	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+		ch = &priv->ch[k];
+
+		if (!priv->ch[k].enabled)
+			continue;
+
+		/* set bpp format in PKF[4:0] */
+		tmp = lcdc_read_chan(ch, LDDFR);
+		tmp &= ~(0x0001001f);
+		tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0;
+		lcdc_write_chan(ch, LDDFR, tmp);
+
+		/* point out our frame buffer */
+		lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start);
+
+		/* set line size */
+		lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length);
+
+		/* continuous read mode */
+		lcdc_write_chan(ch, LDSM1R, 0);
+	}
+
+	/* display output */
+	lcdc_write(priv, _LDCNT1R, LCDC_ENABLE);
+
+	/* start the lcdc */
+	sh_mobile_lcdc_start_stop(priv, 1);
+
+	/* tell the board code to enable the panel */
+	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+		ch = &priv->ch[k];
+		board_cfg = &ch->cfg.board_cfg;
+		if (board_cfg->display_on)
+			board_cfg->display_on(board_cfg->board_data);
+	}
+
+	return 0;
+}
+
+static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
+{
+	struct sh_mobile_lcdc_chan *ch;
+	struct sh_mobile_lcdc_board_cfg	*board_cfg;
+	int k;
+
+	/* tell the board code to disable the panel */
+	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+		ch = &priv->ch[k];
+		board_cfg = &ch->cfg.board_cfg;
+		if (board_cfg->display_off)
+			board_cfg->display_off(board_cfg->board_data);
+	}
+
+	/* stop the lcdc */
+	sh_mobile_lcdc_start_stop(priv, 0);
+}
+
+static int sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *ch)
+{
+	int ifm, miftyp;
+
+	switch (ch->cfg.interface_type) {
+	case RGB8: ifm = 0; miftyp = 0; break;
+	case RGB9: ifm = 0; miftyp = 4; break;
+	case RGB12A: ifm = 0; miftyp = 5; break;
+	case RGB12B: ifm = 0; miftyp = 6; break;
+	case RGB16: ifm = 0; miftyp = 7; break;
+	case RGB18: ifm = 0; miftyp = 10; break;
+	case RGB24: ifm = 0; miftyp = 11; break;
+	case SYS8A: ifm = 1; miftyp = 0; break;
+	case SYS8B: ifm = 1; miftyp = 1; break;
+	case SYS8C: ifm = 1; miftyp = 2; break;
+	case SYS8D: ifm = 1; miftyp = 3; break;
+	case SYS9: ifm = 1; miftyp = 4; break;
+	case SYS12: ifm = 1; miftyp = 5; break;
+	case SYS16A: ifm = 1; miftyp = 7; break;
+	case SYS16B: ifm = 1; miftyp = 8; break;
+	case SYS16C: ifm = 1; miftyp = 9; break;
+	case SYS18: ifm = 1; miftyp = 10; break;
+	case SYS24: ifm = 1; miftyp = 11; break;
+	default: goto bad;
+	}
+
+	/* SUBLCD only supports SYS interface */
+	if (lcdc_chan_is_sublcd(ch)) {
+		if (ifm == 0)
+			goto bad;
+		else
+			ifm = 0;
+	}
+
+	ch->ldmt1r_value = (ifm << 12) | miftyp;
+	return 0;
+ bad:
+	return -EINVAL;
+}
+
+static int sh_mobile_lcdc_setup_clocks(struct device *dev, int clock_source,
+				       struct sh_mobile_lcdc_priv *priv)
+{
+	char *str;
+	int icksel;
+
+	switch (clock_source) {
+	case LCDC_CLK_BUS: str = "bus_clk"; icksel = 0; break;
+	case LCDC_CLK_PERIPHERAL: str = "peripheral_clk"; icksel = 1; break;
+	case LCDC_CLK_EXTERNAL: str = NULL; icksel = 2; break;
+	default:
+		return -EINVAL;
+	}
+
+	priv->lddckr = icksel << 16;
+
+	if (str) {
+		priv->clk = clk_get(dev, str);
+		if (IS_ERR(priv->clk)) {
+			dev_err(dev, "cannot get clock %s\n", str);
+			return PTR_ERR(priv->clk);
+		}
+
+		clk_enable(priv->clk);
+	}
+
+	return 0;
+}
+
+static int sh_mobile_lcdc_setcolreg(u_int regno,
+				    u_int red, u_int green, u_int blue,
+				    u_int transp, struct fb_info *info)
+{
+	u32 *palette = info->pseudo_palette;
+
+	if (regno >= PALETTE_NR)
+		return -EINVAL;
+
+	/* only FB_VISUAL_TRUECOLOR supported */
+
+	red >>= 16 - info->var.red.length;
+	green >>= 16 - info->var.green.length;
+	blue >>= 16 - info->var.blue.length;
+	transp >>= 16 - info->var.transp.length;
+
+	palette[regno] = (red << info->var.red.offset) |
+	  (green << info->var.green.offset) |
+	  (blue << info->var.blue.offset) |
+	  (transp << info->var.transp.offset);
+
+	return 0;
+}
+
+static struct fb_fix_screeninfo sh_mobile_lcdc_fix  = {
+	.id =		"SH Mobile LCDC",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_TRUECOLOR,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static struct fb_ops sh_mobile_lcdc_ops = {
+	.fb_setcolreg	= sh_mobile_lcdc_setcolreg,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static int sh_mobile_lcdc_set_bpp(struct fb_var_screeninfo *var, int bpp)
+{
+	switch (bpp) {
+	case 16: /* PKF[4:0] = 00011 - RGB 565 */
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
+
+	case 32: /* PKF[4:0] = 00000 - RGB 888
+		  * sh7722 pdf says 00RRGGBB but reality is GGBB00RR
+		  * this may be because LDDDSR has word swap enabled..
+		  */
+		var->red.offset = 0;
+		var->red.length = 8;
+		var->green.offset = 24;
+		var->green.length = 8;
+		var->blue.offset = 16;
+		var->blue.length = 8;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	var->bits_per_pixel = bpp;
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+	return 0;
+}
+
+static int sh_mobile_lcdc_remove(struct platform_device *pdev);
+
+static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
+{
+	struct fb_info *info;
+	struct sh_mobile_lcdc_priv *priv;
+	struct sh_mobile_lcdc_info *pdata;
+	struct sh_mobile_lcdc_chan_cfg *cfg;
+	struct resource *res;
+	int error;
+	void *buf;
+	int i, j;
+
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		error = -EINVAL;
+		goto err0;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "cannot find IO resource\n");
+		error = -ENOENT;
+		goto err0;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "cannot allocate device data\n");
+		error = -ENOMEM;
+		goto err0;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	pdata = pdev->dev.platform_data;
+
+	j = 0;
+	for (i = 0; i < ARRAY_SIZE(pdata->ch); i++) {
+		priv->ch[j].lcdc = priv;
+		memcpy(&priv->ch[j].cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
+
+		error = sh_mobile_lcdc_check_interface(&priv->ch[i]);
+		if (error) {
+			dev_err(&pdev->dev, "unsupported interface type\n");
+			goto err1;
+		}
+
+		switch (pdata->ch[i].chan) {
+		case LCDC_CHAN_MAINLCD:
+			priv->ch[j].enabled = 1 << 1;
+			priv->ch[j].reg_offs = lcdc_offs_mainlcd;
+			j++;
+			break;
+		case LCDC_CHAN_SUBLCD:
+			priv->ch[j].enabled = 1 << 2;
+			priv->ch[j].reg_offs = lcdc_offs_sublcd;
+			j++;
+			break;
+		}
+	}
+
+	if (!j) {
+		dev_err(&pdev->dev, "no channels defined\n");
+		error = -EINVAL;
+		goto err1;
+	}
+
+	error = sh_mobile_lcdc_setup_clocks(&pdev->dev,
+					    pdata->clock_source, priv);
+	if (error) {
+		dev_err(&pdev->dev, "unable to setup clocks\n");
+		goto err1;
+	}
+
+	priv->lddckr = pdata->lddckr;
+	priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
+
+	for (i = 0; i < j; i++) {
+		info = &priv->ch[i].info;
+		cfg = &priv->ch[i].cfg;
+
+		info->fbops = &sh_mobile_lcdc_ops;
+		info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
+		info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
+		info->var.activate = FB_ACTIVATE_NOW;
+		error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
+		if (error)
+			break;
+
+		info->fix = sh_mobile_lcdc_fix;
+		info->fix.line_length = cfg->lcd_cfg.xres * (cfg->bpp / 8);
+		info->fix.smem_len = info->fix.line_length * cfg->lcd_cfg.yres;
+
+		buf = dma_alloc_coherent(&pdev->dev, info->fix.smem_len,
+					 &priv->ch[i].dma_handle, GFP_KERNEL);
+		if (!buf) {
+			dev_err(&pdev->dev, "unable to allocate buffer\n");
+			error = -ENOMEM;
+			break;
+		}
+
+		info->pseudo_palette = &priv->ch[i].pseudo_palette;
+		info->flags = FBINFO_FLAG_DEFAULT;
+
+		error = fb_alloc_cmap(&info->cmap, PALETTE_NR, 0);
+		if (error < 0) {
+			dev_err(&pdev->dev, "unable to allocate cmap\n");
+			dma_free_coherent(&pdev->dev, info->fix.smem_len,
+					  buf, priv->ch[i].dma_handle);
+			break;
+		}
+
+		memset(buf, 0, info->fix.smem_len);
+		info->fix.smem_start = priv->ch[i].dma_handle;
+		info->screen_base = buf;
+		info->device = &pdev->dev;
+	}
+
+	if (error)
+		goto err1;
+
+	error = sh_mobile_lcdc_start(priv);
+	if (error) {
+		dev_err(&pdev->dev, "unable to start hardware\n");
+		goto err1;
+	}
+
+	for (i = 0; i < j; i++) {
+		error = register_framebuffer(&priv->ch[i].info);
+		if (error < 0)
+			goto err1;
+	}
+
+	for (i = 0; i < j; i++) {
+		info = &priv->ch[i].info;
+		dev_info(info->dev,
+			 "registered %s/%s as %dx%d %dbpp.\n",
+			 pdev->name,
+			 (priv->ch[i].cfg.chan == LCDC_CHAN_MAINLCD) ?
+			 "mainlcd" : "sublcd",
+			 (int) priv->ch[i].cfg.lcd_cfg.xres,
+			 (int) priv->ch[i].cfg.lcd_cfg.yres,
+			 priv->ch[i].cfg.bpp);
+	}
+
+	return 0;
+ err1:
+	sh_mobile_lcdc_remove(pdev);
+ err0:
+	return error;
+}
+
+static int sh_mobile_lcdc_remove(struct platform_device *pdev)
+{
+	struct sh_mobile_lcdc_priv *priv = platform_get_drvdata(pdev);
+	struct fb_info *info;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
+		if (priv->ch[i].info.dev)
+			unregister_framebuffer(&priv->ch[i].info);
+
+	sh_mobile_lcdc_stop(priv);
+
+	for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
+		info = &priv->ch[i].info;
+
+		if (!info->device)
+			continue;
+
+		dma_free_coherent(&pdev->dev, info->fix.smem_len,
+				  info->screen_base, priv->ch[i].dma_handle);
+		fb_dealloc_cmap(&info->cmap);
+	}
+
+	if (priv->clk) {
+		clk_disable(priv->clk);
+		clk_put(priv->clk);
+	}
+
+	if (priv->base)
+		iounmap(priv->base);
+
+	kfree(priv);
+	return 0;
+}
+
+static struct platform_driver sh_mobile_lcdc_driver = {
+	.driver		= {
+		.name		= "sh_mobile_lcdc_fb",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= sh_mobile_lcdc_probe,
+	.remove		= sh_mobile_lcdc_remove,
+};
+
+static int __init sh_mobile_lcdc_init(void)
+{
+	return platform_driver_register(&sh_mobile_lcdc_driver);
+}
+
+static void __exit sh_mobile_lcdc_exit(void)
+{
+	platform_driver_unregister(&sh_mobile_lcdc_driver);
+}
+
+module_init(sh_mobile_lcdc_init);
+module_exit(sh_mobile_lcdc_exit);
+
+MODULE_DESCRIPTION("SuperH Mobile LCDC Framebuffer driver");
+MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/asm-sh/sh_mobile_lcdc.h b/include/asm-sh/sh_mobile_lcdc.h
new file mode 100644
index 00000000000..27677727df4
--- /dev/null
+++ b/include/asm-sh/sh_mobile_lcdc.h
@@ -0,0 +1,66 @@
+#ifndef __ASM_SH_MOBILE_LCDC_H__
+#define __ASM_SH_MOBILE_LCDC_H__
+
+#include <linux/fb.h>
+
+enum { RGB8,   /* 24bpp, 8:8:8 */
+       RGB9,   /* 18bpp, 9:9 */
+       RGB12A, /* 24bpp, 12:12 */
+       RGB12B, /* 12bpp */
+       RGB16,  /* 16bpp */
+       RGB18,  /* 18bpp */
+       RGB24,  /* 24bpp */
+       SYS8A,  /* 24bpp, 8:8:8 */
+       SYS8B,  /* 18bpp, 8:8:2 */
+       SYS8C,  /* 18bpp, 2:8:8 */
+       SYS8D,  /* 16bpp, 8:8 */
+       SYS9,   /* 18bpp, 9:9 */
+       SYS12,  /* 24bpp, 12:12 */
+       SYS16A, /* 16bpp */
+       SYS16B, /* 18bpp, 16:2 */
+       SYS16C, /* 18bpp, 2:16 */
+       SYS18,  /* 18bpp */
+       SYS24 };/* 24bpp */
+
+enum { LCDC_CHAN_DISABLED = 0,
+       LCDC_CHAN_MAINLCD,
+       LCDC_CHAN_SUBLCD };
+
+enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL };
+
+struct sh_mobile_lcdc_sys_bus_cfg {
+	unsigned long ldmt2r;
+	unsigned long ldmt3r;
+};
+
+struct sh_mobile_lcdc_sys_bus_ops {
+	void (*write_index)(void *handle, unsigned long data);
+	void (*write_data)(void *handle, unsigned long data);
+	unsigned long (*read_data)(void *handle);
+};
+
+struct sh_mobile_lcdc_board_cfg {
+	void *board_data;
+	int (*setup_sys)(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+	void (*display_on)(void *board_data);
+	void (*display_off)(void *board_data);
+};
+
+struct sh_mobile_lcdc_chan_cfg {
+	int chan;
+	int bpp;
+	int interface_type; /* selects RGBn or SYSn I/F, see above */
+	int clock_divider;
+	struct fb_videomode lcd_cfg;
+	struct sh_mobile_lcdc_board_cfg board_cfg;
+	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
+};
+
+struct sh_mobile_lcdc_info {
+	unsigned long lddckr;
+	int clock_source;
+	struct sh_mobile_lcdc_chan_cfg ch[2];
+};
+
+#endif /* __ASM_SH_MOBILE_LCDC_H__ */
-- 
cgit v1.2.3


From b604838ac6d233fd6bffc0e758a818133a01ff22 Mon Sep 17 00:00:00 2001
From: Frans Pop <elendil@planet.nl>
Date: Wed, 23 Jul 2008 21:31:26 -0700
Subject: vfb: only enable if explicitly requested when compiled in

The Kconfig help for the vfb driver says:
   Do NOT enable it for normal systems! To protect the innocent, it
   has to be enabled explicitly at boot time using the kernel option
   `video=vfb:'.

This change lets the code match the description.

Support for vfb:disable is kept for backwards compatibility; vfb:off works
because it is tested at a higher level.

Note: any undefined option (e.g. vfb:enable) will also enable this driver.

The relevant code has been unchanged since before the migration to
git (2.6.12).

This patch fixes bugzilla #9310 and was the root cause behind
http://lkml.org/lkml/2008/5/31/220.

Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/vfb.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index 072638a9528..93fe08d6c78 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -443,19 +443,29 @@ static int vfb_mmap(struct fb_info *info,
 }
 
 #ifndef MODULE
+/*
+ * The virtual framebuffer driver is only enabled if explicitly
+ * requested by passing 'video=vfb:' (or any actual options).
+ */
 static int __init vfb_setup(char *options)
 {
 	char *this_opt;
 
+	vfb_enable = 0;
+
+	if (!options)
+		return 1;
+
 	vfb_enable = 1;
 
-	if (!options || !*options)
+	if (!*options)
 		return 1;
 
 	while ((this_opt = strsep(&options, ",")) != NULL) {
 		if (!*this_opt)
 			continue;
-		if (!strncmp(this_opt, "disable", 7))
+		/* Test disable for backwards compatibility */
+		if (!strcmp(this_opt, "disable"))
 			vfb_enable = 0;
 	}
 	return 1;
-- 
cgit v1.2.3


From 2870086e9f2032bdd95b8da9bd187e3c16fc6d49 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:26 -0700
Subject: hgafb: convert to new platform driver API

Convert the hgafb driver to use new platform driver API.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9689

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/hgafb.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index c18880d9db1..0129c044f6d 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -551,7 +551,7 @@ static struct fb_ops hgafb_ops = {
 	 *  Initialization
 	 */
 
-static int __init hgafb_probe(struct device *device)
+static int __init hgafb_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
 
@@ -565,7 +565,7 @@ static int __init hgafb_probe(struct device *device)
 	printk(KERN_INFO "hgafb: %s with %ldK of memory detected.\n",
 		hga_type_name, hga_vram_len/1024);
 
-	info = framebuffer_alloc(0, NULL);
+	info = framebuffer_alloc(0, &pdev->dev);
 	if (!info) {
 		iounmap(hga_vram);
 		return -ENOMEM;
@@ -593,13 +593,13 @@ static int __init hgafb_probe(struct device *device)
 
         printk(KERN_INFO "fb%d: %s frame buffer device\n",
                info->node, info->fix.id);
-	dev_set_drvdata(device, info);
+	platform_set_drvdata(pdev, info);
 	return 0;
 }
 
-static int hgafb_remove(struct device *device)
+static int hgafb_remove(struct platform_device *pdev)
 {
-	struct fb_info *info = dev_get_drvdata(device);
+	struct fb_info *info = platform_get_drvdata(pdev);
 
 	hga_txt_mode();
 	hga_clear_screen();
@@ -620,16 +620,15 @@ static int hgafb_remove(struct device *device)
 	return 0;
 }
 
-static struct device_driver hgafb_driver = {
-	.name = "hgafb",
-	.bus  = &platform_bus_type,
+static struct platform_driver hgafb_driver = {
 	.probe = hgafb_probe,
 	.remove = hgafb_remove,
+	.driver = {
+		.name = "hgafb",
+	},
 };
 
-static struct platform_device hgafb_device = {
-	.name = "hgafb",
-};
+static struct platform_device *hgafb_device;
 
 static int __init hgafb_init(void)
 {
@@ -638,12 +637,15 @@ static int __init hgafb_init(void)
 	if (fb_get_options("hgafb", NULL))
 		return -ENODEV;
 
-	ret = driver_register(&hgafb_driver);
+	ret = platform_driver_register(&hgafb_driver);
 
 	if (!ret) {
-		ret = platform_device_register(&hgafb_device);
-		if (ret)
-			driver_unregister(&hgafb_driver);
+		hgafb_device = platform_device_register_simple("hgafb", 0, NULL, 0);
+
+		if (IS_ERR(hgafb_device)) {
+			platform_driver_unregister(&hgafb_driver);
+			ret = PTR_ERR(hgafb_device);
+		}
 	}
 
 	return ret;
@@ -651,8 +653,8 @@ static int __init hgafb_init(void)
 
 static void __exit hgafb_exit(void)
 {
-	platform_device_unregister(&hgafb_device);
-	driver_unregister(&hgafb_driver);
+	platform_device_unregister(hgafb_device);
+	platform_driver_unregister(&hgafb_driver);
 }
 
 /* -------------------------------------------------------------------------
-- 
cgit v1.2.3


From 43a3abc6aca8505e708508e2c7c2f99a7f8f820b Mon Sep 17 00:00:00 2001
From: Ville Syrjala <syrjala@sci.fi>
Date: Wed, 23 Jul 2008 21:31:27 -0700
Subject: fbdev: width and height are unsigned

The width and height members of fb_var_screeninfo are __u32.  The code
initializes them to -1 which seems wrong, and 0 seems like an equally good
default value.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/fbmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 052e1805849..6a0aa180c26 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -879,7 +879,7 @@ int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
 		if (edid_is_timing_block(block)) {
 			var->xres = var->xres_virtual = H_ACTIVE;
 			var->yres = var->yres_virtual = V_ACTIVE;
-			var->height = var->width = -1;
+			var->height = var->width = 0;
 			var->right_margin = H_SYNC_OFFSET;
 			var->left_margin = (H_ACTIVE + H_BLANKING) -
 				(H_ACTIVE + H_SYNC_OFFSET + H_SYNC_WIDTH);
-- 
cgit v1.2.3


From 7572a1ea034a8fc45e57de28cc7573264975532a Mon Sep 17 00:00:00 2001
From: Ville Syrjala <syrjala@sci.fi>
Date: Wed, 23 Jul 2008 21:31:28 -0700
Subject: fbdev: xoffset, yoffset and yres are unsigned

The xoffset, yoffset and yres members of fb_var_screeninfo are __u32.
Make them unsigned in the code as well.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/fbmem.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 1cd5071e536..6b487801eea 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -848,9 +848,8 @@ int
 fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
 {
 	struct fb_fix_screeninfo *fix = &info->fix;
-        int xoffset = var->xoffset;
-        int yoffset = var->yoffset;
-        int err = 0, yres = info->var.yres;
+	unsigned int yres = info->var.yres;
+	int err = 0;
 
 	if (var->yoffset > 0) {
 		if (var->vmode & FB_VMODE_YWRAP) {
@@ -866,8 +865,8 @@ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
 				 (var->xoffset % fix->xpanstep)))
 		err = -EINVAL;
 
-        if (err || !info->fbops->fb_pan_display || xoffset < 0 ||
-	    yoffset < 0 || var->yoffset + yres > info->var.yres_virtual ||
+	if (err || !info->fbops->fb_pan_display ||
+	    var->yoffset + yres > info->var.yres_virtual ||
 	    var->xoffset + info->var.xres > info->var.xres_virtual)
 		return -EINVAL;
 
-- 
cgit v1.2.3


From 50cd0221c9062ec5dac8a3620f36f568df052ac1 Mon Sep 17 00:00:00 2001
From: Olaf Hering <olaf@aepfle.de>
Date: Wed, 23 Jul 2008 21:31:29 -0700
Subject: atyfb: remove dead code

Remove dead code.  This will slightly change the behaviour of the driver
on systems that support backlight control.  Previously they would just
turn the backlight off using the backlight control but now the generic LCD
code will also turn off the LCD using the POWER_MANAGEMENT register.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/aty/atyfb_base.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index bd4ac0bafec..d7ba3f1a4d8 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2709,8 +2709,7 @@ static int atyfb_blank(int blank, struct fb_info *info)
 	if (par->lock_blank || par->asleep)
 		return 0;
 
-#ifdef CONFIG_FB_ATY_BACKLIGHT
-#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
+#ifdef CONFIG_FB_ATY_GENERIC_LCD
 	if (par->lcd_table && blank > FB_BLANK_NORMAL &&
 	    (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
 		u32 pm = aty_ld_lcd(POWER_MANAGEMENT, par);
@@ -2739,8 +2738,7 @@ static int atyfb_blank(int blank, struct fb_info *info)
 	}
 	aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
 
-#ifdef CONFIG_FB_ATY_BACKLIGHT
-#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
+#ifdef CONFIG_FB_ATY_GENERIC_LCD
 	if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
 	    (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
 		u32 pm = aty_ld_lcd(POWER_MANAGEMENT, par);
-- 
cgit v1.2.3


From 3880b0b5297ae9bf58a7662d13a46b5d5f0b2af6 Mon Sep 17 00:00:00 2001
From: Ville Syrjala <syrjala@sci.fi>
Date: Wed, 23 Jul 2008 21:31:30 -0700
Subject: atyfb: correct_chipset() can fail

Atari probe code relies on correct_chipset() failing if the device is not
a mach64 GX/CX.  aty_chips[] array would be indexed with -1 in that case.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/aty/atyfb_base.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index d7ba3f1a4d8..d6903c70bee 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -424,7 +424,6 @@ static struct {
 #endif /* CONFIG_FB_ATY_CT */
 };
 
-/* can not fail */
 static int __devinit correct_chipset(struct atyfb_par *par)
 {
 	u8 rev;
@@ -437,6 +436,9 @@ static int __devinit correct_chipset(struct atyfb_par *par)
 		if (par->pci_id == aty_chips[i].pci_id)
 			break;
 
+	if (i < 0)
+		return -ENODEV;
+
 	name = aty_chips[i].name;
 	par->pll_limits.pll_max = aty_chips[i].pll;
 	par->pll_limits.mclk = aty_chips[i].mclk;
-- 
cgit v1.2.3


From 6cfafc15994ac2a2377b32b5a65cf62a90a80d49 Mon Sep 17 00:00:00 2001
From: Ville Syrjala <syrjala@sci.fi>
Date: Wed, 23 Jul 2008 21:31:31 -0700
Subject: atyfb: use a PCI device ID table

Convert atyfb to use a PCI device ID table.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/aty/atyfb_base.c | 73 +++++++++++++++++++++++++++++++-----------
 1 file changed, 55 insertions(+), 18 deletions(-)

diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index d6903c70bee..872760accb9 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -3418,14 +3418,7 @@ static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_devi
 	struct fb_info *info;
 	struct resource *rp;
 	struct atyfb_par *par;
-	int i, rc = -ENOMEM;
-
-	for (i = ARRAY_SIZE(aty_chips) - 1; i >= 0; i--)
-		if (pdev->device == aty_chips[i].pci_id)
-			break;
-
-	if (i < 0)
-		return -ENODEV;
+	int rc = -ENOMEM;
 
 	/* Enable device in PCI config */
 	if (pci_enable_device(pdev)) {
@@ -3456,7 +3449,7 @@ static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_devi
 	par = info->par;
 	info->fix = atyfb_fix;
 	info->device = &pdev->dev;
-	par->pci_id = aty_chips[i].pci_id;
+	par->pci_id = pdev->device;
 	par->res_start = res_start;
 	par->res_size = res_size;
 	par->irq = pdev->irq;
@@ -3655,18 +3648,62 @@ static void __devexit atyfb_pci_remove(struct pci_dev *pdev)
 	atyfb_remove(info);
 }
 
-/*
- * This driver uses its own matching table. That will be more difficult
- * to fix, so for now, we just match against any ATI ID and let the
- * probe() function find out what's up. That also mean we don't have
- * a module ID table though.
- */
 static struct pci_device_id atyfb_pci_tbl[] = {
-	{ PCI_VENDOR_ID_ATI, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  PCI_BASE_CLASS_DISPLAY << 16, 0xff0000, 0 },
-	{ 0, }
+#ifdef CONFIG_FB_ATY_GX
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GX) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64CX) },
+#endif /* CONFIG_FB_ATY_GX */
+
+#ifdef CONFIG_FB_ATY_CT
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64CT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64ET) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LT) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64VT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GT) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64VU) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GU) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LG) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64VV) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GV) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GW) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GY) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GZ) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GB) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GD) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GI) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GP) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GQ) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LB) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LD) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LI) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LP) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LQ) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GM) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GN) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GO) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GL) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GR) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64GS) },
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LM) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LN) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LR) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_CHIP_MACH64LS) },
+#endif /* CONFIG_FB_ATY_CT */
+	{ }
 };
 
+MODULE_DEVICE_TABLE(pci, atyfb_pci_tbl);
+
 static struct pci_driver atyfb_driver = {
 	.name		= "atyfb",
 	.id_table	= atyfb_pci_tbl,
-- 
cgit v1.2.3


From 89c69d2b8eb3ee2338fded9d70a0795b4712f112 Mon Sep 17 00:00:00 2001
From: Ville Syrjala <syrjala@sci.fi>
Date: Wed, 23 Jul 2008 21:31:32 -0700
Subject: atyfb: report probe errors

Properly propagate errors to the probe function.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/aty/atyfb_base.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 872760accb9..e38398f491f 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2231,6 +2231,7 @@ static int __devinit aty_init(struct fb_info *info)
 	const char *ramname = NULL, *xtal;
 	int gtb_memsize, has_var = 0;
 	struct fb_var_screeninfo var;
+	int ret;
 
 	init_waitqueue_head(&par->vblank.wait);
 	spin_lock_init(&par->int_lock);
@@ -2612,7 +2613,8 @@ static int __devinit aty_init(struct fb_info *info)
 			var.yres_virtual = var.yres;
 	}
 
-	if (atyfb_check_var(&var, info)) {
+	ret = atyfb_check_var(&var, info);
+	if (ret) {
 		PRINTKE("can't set default video mode\n");
 		goto aty_init_exit;
 	}
@@ -2623,10 +2625,12 @@ static int __devinit aty_init(struct fb_info *info)
 #endif /* CONFIG_FB_ATY_CT */
 	info->var = var;
 
-	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret < 0)
 		goto aty_init_exit;
 
-	if (register_framebuffer(info) < 0) {
+	ret = register_framebuffer(info);
+	if (ret < 0) {
 		fb_dealloc_cmap(&info->cmap);
 		goto aty_init_exit;
 	}
@@ -2652,7 +2656,7 @@ aty_init_exit:
 	    par->mtrr_aper = -1;
 	}
 #endif
-	return -1;
+	return ret;
 }
 
 static void aty_resume_chip(struct fb_info *info)
@@ -3467,7 +3471,8 @@ static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_devi
 	pci_set_drvdata(pdev, info);
 
 	/* Init chip & register framebuffer */
-	if (aty_init(info))
+	rc = aty_init(info);
+	if (rc)
 		goto err_release_io;
 
 #ifdef __sparc__
-- 
cgit v1.2.3


From 1c554ff9554d67b4db0fb5e2f78c7cb4b2e0d627 Mon Sep 17 00:00:00 2001
From: Ville Syrjala <syrjala@sci.fi>
Date: Wed, 23 Jul 2008 21:31:32 -0700
Subject: atyfb: fix a cast

The argument to iounmap() is void __iomem *. Fix the cast.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/aty/atyfb_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index e38398f491f..620ba812036 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -3335,7 +3335,7 @@ static int __devinit init_from_bios(struct atyfb_par *par)
 		PRINTKE("no BIOS frequency table found, use parameters\n");
 		ret = -ENXIO;
 	}
-	iounmap((void* __iomem )bios_base);
+	iounmap((void __iomem *)bios_base);
 
 	return ret;
 }
-- 
cgit v1.2.3


From a882ef47c7156e8cc47e72f2aa396f2514569c48 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Wed, 23 Jul 2008 21:31:33 -0700
Subject: aty: use memory_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/aty/radeon_base.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 3c0a03f69d8..652273e9f5f 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2098,15 +2098,7 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo)
 
 static ssize_t radeon_show_one_edid(char *buf, loff_t off, size_t count, const u8 *edid)
 {
-	if (off > EDID_LENGTH)
-		return 0;
-
-	if (off + count > EDID_LENGTH)
-		count = EDID_LENGTH - off;
-
-	memcpy(buf, edid + off, count);
-
-	return count;
+	return memory_read_from_buffer(buf, count, &off, edid, EDID_LENGTH);
 }
 
 
-- 
cgit v1.2.3


From 84c41ce83e9b2987ccef352f28ba0055b26c8f8e Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:34 -0700
Subject: skeletonfb: update to correct platform driver usage

It updates skeletonfb to new platform driver API.  The skeletonfb is
templates for creating new drivers.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/skeletonfb.c | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
index 62321458f71..df5336561d1 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -675,13 +675,13 @@ static struct fb_ops xxxfb_ops = {
      *  Initialization
      */
 
-/* static int __init xxfb_probe (struct device *device) -- for platform devs */
+/* static int __init xxfb_probe (struct platform_device *pdev) -- for platform devs */
 static int __devinit xxxfb_probe(struct pci_dev *dev,
 			      const struct pci_device_id *ent)
 {
     struct fb_info *info;
     struct xxx_par *par;
-    struct device* device = &dev->dev; /* for pci drivers */
+    struct device *device = &dev->dev; /* or &pdev->dev */
     int cmap_len, retval;	
    
     /*
@@ -824,18 +824,18 @@ static int __devinit xxxfb_probe(struct pci_dev *dev,
 	return -EINVAL;
     printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
 	   info->fix.id);
-    pci_set_drvdata(dev, info); /* or dev_set_drvdata(device, info) */
+    pci_set_drvdata(dev, info); /* or platform_set_drvdata(pdev, info) */
     return 0;
 }
 
     /*
      *  Cleanup
      */
-/* static void __devexit xxxfb_remove(struct device *device) */
+/* static void __devexit xxxfb_remove(struct platform_device *pdev) */
 static void __devexit xxxfb_remove(struct pci_dev *dev)
 {
 	struct fb_info *info = pci_get_drvdata(dev);
-	/* or dev_get_drvdata(device); */
+	/* or platform_get_drvdata(pdev); */
 
 	if (info) {
 		unregister_framebuffer(info);
@@ -961,18 +961,17 @@ static int xxxfb_resume(struct platform_dev *dev)
 #define xxxfb_resume NULL
 #endif /* CONFIG_PM */
 
-static struct device_driver xxxfb_driver = {
-	.name = "xxxfb",
-	.bus  = &platform_bus_type,
+static struct platform_device_driver xxxfb_driver = {
 	.probe = xxxfb_probe,
 	.remove = xxxfb_remove,
 	.suspend = xxxfb_suspend, /* optional but recommended */
 	.resume = xxxfb_resume,   /* optional but recommended */
+	.driver = {
+		.name = "xxxfb",
+	},
 };
 
-static struct platform_device xxxfb_device = {
-	.name = "xxxfb",
-};
+static struct platform_device *xxxfb_device;
 
 #ifndef MODULE
     /*
@@ -1002,12 +1001,16 @@ static int __init xxxfb_init(void)
 		return -ENODEV;
 	xxxfb_setup(option);
 #endif
-	ret = driver_register(&xxxfb_driver);
+	ret = platform_driver_register(&xxxfb_driver);
 
 	if (!ret) {
-		ret = platform_device_register(&xxxfb_device);
-		if (ret)
-			driver_unregister(&xxxfb_driver);
+		xxxfb_device = platform_device_register_simple("xxxfb", 0,
+								NULL, 0);
+
+		if (IS_ERR(xxxfb_device)) {
+			platform_driver_unregister(&xxxfb_driver);
+			ret = PTR_ERR(xxxfb_device);
+		}
 	}
 
 	return ret;
@@ -1015,8 +1018,8 @@ static int __init xxxfb_init(void)
 
 static void __exit xxxfb_exit(void)
 {
-	platform_device_unregister(&xxxfb_device);
-	driver_unregister(&xxxfb_driver);
+	platform_device_unregister(xxxfb_device);
+	platform_driver_unregister(&xxxfb_driver);
 }
 #endif /* CONFIG_PCI */
 
-- 
cgit v1.2.3


From 968910bd03b226ed410d092c2da59dffe5bfe8de Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 23 Jul 2008 21:31:34 -0700
Subject: atmel_lcdfb: avoid division by zero

Avoid division by zero in  atmel_lcdfb_check_var() function.

If pixclock is not specified while passing a var structure in
the check_var() funtion, a division by zero occurs (when
translating pixclock to KHz).

This patch adds a checking of this value and try to choose a
video mode in the modelist.

The mode found in the probe function in added to the modelist.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/atmel_lcdfb.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index d335bb96b03..5b3a15dffb5 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -256,6 +256,20 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 	return 0;
 }
 
+static const struct fb_videomode *atmel_lcdfb_choose_mode(struct fb_var_screeninfo *var,
+						     struct fb_info *info)
+{
+	struct fb_videomode varfbmode;
+	const struct fb_videomode *fbmode = NULL;
+
+	fb_var_to_videomode(&varfbmode, var);
+	fbmode = fb_find_nearest_mode(&varfbmode, &info->modelist);
+	if (fbmode)
+		fb_videomode_to_var(var, fbmode);
+	return fbmode;
+}
+
+
 /**
  *      atmel_lcdfb_check_var - Validates a var passed in.
  *      @var: frame buffer variable screen structure
@@ -289,6 +303,15 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
 
 	dev_dbg(dev, "%s:\n", __func__);
+
+	if (!(var->pixclock && var->bits_per_pixel)) {
+		/* choose a suitable mode if possible */
+		if (!atmel_lcdfb_choose_mode(var, info)) {
+			dev_err(dev, "needed value not specified\n");
+			return -EINVAL;
+		}
+	}
+
 	dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
 	dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
 	dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
@@ -299,6 +322,13 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
+	/* Do not allow to have real resoulution larger than virtual */
+	if (var->xres > var->xres_virtual)
+		var->xres_virtual = var->xres;
+
+	if (var->yres > var->yres_virtual)
+		var->yres_virtual = var->yres;
+
 	/* Force same alignment for each line */
 	var->xres = (var->xres + 3) & ~3UL;
 	var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
@@ -740,6 +770,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	struct fb_info *info;
 	struct atmel_lcdfb_info *sinfo;
 	struct atmel_lcdfb_info *pdata_sinfo;
+	struct fb_videomode fbmode;
 	struct resource *regs = NULL;
 	struct resource *map = NULL;
 	int ret;
@@ -906,6 +937,10 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 		goto free_cmap;
 	}
 
+	/* add selected videomode to modelist */
+	fb_var_to_videomode(&fbmode, &info->var);
+	fb_add_videomode(&fbmode, &info->modelist);
+
 	/* Power up the LCDC screen */
 	if (sinfo->atmel_lcdfb_power_control)
 		sinfo->atmel_lcdfb_power_control(1);
-- 
cgit v1.2.3


From 206c5d69d0540024faffd423fc703f1e457332d7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 23 Jul 2008 21:31:35 -0700
Subject: sm501: add inversion controls for VBIASEN and FPEN

Add flags to allow the driver to invert the sense of both VBIASEN and FPEN
signals comming from the SM501.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/sm501fb.c | 26 ++++++++++++++++++++++----
 include/linux/sm501.h   |  2 ++
 2 files changed, 24 insertions(+), 4 deletions(-)

diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 15d4a768b1f..122a0f8495c 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -663,15 +663,25 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
 		sm501fb_sync_regs(fbi);
 		mdelay(10);
 
+		/* VBIASEN */
+
 		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
-			control |= SM501_DC_PANEL_CONTROL_BIAS;	/* VBIASEN */
+			if (pd->flags & SM501FB_FLAG_PANEL_INV_VBIASEN)
+				control &= ~SM501_DC_PANEL_CONTROL_BIAS;
+			else
+				control |= SM501_DC_PANEL_CONTROL_BIAS;
+
 			writel(control, ctrl_reg);
 			sm501fb_sync_regs(fbi);
 			mdelay(10);
 		}
 
 		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
-			control |= SM501_DC_PANEL_CONTROL_FPEN;
+			if (pd->flags & SM501FB_FLAG_PANEL_INV_FPEN)
+				control &= ~SM501_DC_PANEL_CONTROL_FPEN;
+			else
+				control |= SM501_DC_PANEL_CONTROL_FPEN;
+
 			writel(control, ctrl_reg);
 			sm501fb_sync_regs(fbi);
 			mdelay(10);
@@ -679,14 +689,22 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
 	} else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
 		/* disable panel power */
 		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
-			control &= ~SM501_DC_PANEL_CONTROL_FPEN;
+			if (pd->flags & SM501FB_FLAG_PANEL_INV_FPEN)
+				control |= SM501_DC_PANEL_CONTROL_FPEN;
+			else
+				control &= ~SM501_DC_PANEL_CONTROL_FPEN;
+
 			writel(control, ctrl_reg);
 			sm501fb_sync_regs(fbi);
 			mdelay(10);
 		}
 
 		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
-			control &= ~SM501_DC_PANEL_CONTROL_BIAS;
+			if (pd->flags & SM501FB_FLAG_PANEL_INV_VBIASEN)
+				control |= SM501_DC_PANEL_CONTROL_BIAS;
+			else
+				control &= ~SM501_DC_PANEL_CONTROL_BIAS;
+
 			writel(control, ctrl_reg);
 			sm501fb_sync_regs(fbi);
 			mdelay(10);
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index 95c1c39ba44..b530fa6a1d3 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -73,6 +73,8 @@ extern unsigned long sm501_gpio_get(struct device *dev,
 #define SM501FB_FLAG_USE_HWACCEL	(1<<3)
 #define SM501FB_FLAG_PANEL_NO_FPEN	(1<<4)
 #define SM501FB_FLAG_PANEL_NO_VBIASEN	(1<<5)
+#define SM501FB_FLAG_PANEL_INV_FPEN	(1<<6)
+#define SM501FB_FLAG_PANEL_INV_VBIASEN	(1<<7)
 
 struct sm501_platdata_fbsub {
 	struct fb_videomode	*def_mode;
-- 
cgit v1.2.3


From 9b599fb2fc23386dfd2965bf7d10b2b0f628b208 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 23 Jul 2008 21:31:36 -0700
Subject: sm501: restructure init to allow only 1 fb on an SM501

Add the ability to register only one of the two possible main framebuffer
devices on the SM501 by passing platform data for only the framebuffer
that you are interested in having.

As a side note, we update the init sequence to commonise the code that is
executed twice, and fix a pair of missing frees that we didn't do on
framebuffer exit, such as freeing the fb's cmap.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/sm501fb.c | 264 +++++++++++++++++++++++++++---------------------
 1 file changed, 149 insertions(+), 115 deletions(-)

diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 122a0f8495c..b473cf665d8 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -143,6 +143,8 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
 			   unsigned int why, size_t size)
 {
 	unsigned int ptr = 0;
+	unsigned int end;
+	struct fb_info *fbi;
 
 	switch (why) {
 	case SM501_MEMF_CURSOR:
@@ -152,7 +154,9 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
 
 	case SM501_MEMF_PANEL:
 		ptr = inf->fbmem_len - size;
-		if (ptr < inf->fb[0]->fix.smem_len)
+		fbi = inf->fb[0];
+
+		if (fbi && ptr < fbi->fix.smem_len)
 			return -ENOMEM;
 
 		break;
@@ -162,11 +166,18 @@ static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
 		break;
 
 	case SM501_MEMF_ACCEL:
-		ptr = inf->fb[0]->fix.smem_len;
+		fbi = inf->fb[0];
+		ptr = fbi ? fbi->fix.smem_len : 0;
+
+		fbi = inf->fb[1];
+		if (fbi)
+			end = (fbi->fix.smem_start - inf->fbmem_res->start);
+		else
+			end = inf->fbmem_len;
 
-		if ((ptr + size) >
-		    (inf->fb[1]->fix.smem_start - inf->fbmem_res->start))
+		if ((ptr + size) > end)
 			return -ENOMEM;
+
 		break;
 
 	default:
@@ -1228,39 +1239,6 @@ static struct fb_ops sm501fb_ops_pnl = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-/* sm501fb_info_alloc
- *
- * creates and initialises an sm501fb_info structure
-*/
-
-static struct sm501fb_info *sm501fb_info_alloc(struct fb_info *fbinfo_crt,
-					       struct fb_info *fbinfo_pnl)
-{
-	struct sm501fb_info *info;
-	struct sm501fb_par  *par;
-
-	info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL);
-	if (info) {
-		/* set the references back */
-
-		par = fbinfo_crt->par;
-		par->info = info;
-		par->head = HEAD_CRT;
-		fbinfo_crt->pseudo_palette = &par->pseudo_palette;
-
-		par = fbinfo_pnl->par;
-		par->info = info;
-		par->head = HEAD_PANEL;
-		fbinfo_pnl->pseudo_palette = &par->pseudo_palette;
-
-		/* store the two fbs into our info */
-		info->fb[HEAD_CRT] = fbinfo_crt;
-		info->fb[HEAD_PANEL] = fbinfo_pnl;
-	}
-
-	return info;
-}
-
 /* sm501_init_cursor
  *
  * initialise hw cursor parameters
@@ -1268,10 +1246,16 @@ static struct sm501fb_info *sm501fb_info_alloc(struct fb_info *fbinfo_crt,
 
 static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base)
 {
-	struct sm501fb_par *par = fbi->par;
-	struct sm501fb_info *info = par->info;
+	struct sm501fb_par *par;
+	struct sm501fb_info *info;
 	int ret;
 
+	if (fbi == NULL)
+		return 0;
+
+	par = fbi->par;
+	info = par->info;
+
 	par->cursor_regs = info->regs + reg_base;
 
 	ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024);
@@ -1299,13 +1283,10 @@ static int sm501fb_start(struct sm501fb_info *info,
 			 struct platform_device *pdev)
 {
 	struct resource	*res;
-	struct device *dev;
+	struct device *dev = &pdev->dev;
 	int k;
 	int ret;
 
-	info->dev = dev = &pdev->dev;
-	platform_set_drvdata(pdev, info);
-
 	info->irq = ret = platform_get_irq(pdev, 0);
 	if (ret < 0) {
 		/* we currently do not use the IRQ */
@@ -1408,11 +1389,6 @@ static void sm501fb_stop(struct sm501fb_info *info)
 	kfree(info->regs_res);
 }
 
-static void sm501fb_info_release(struct sm501fb_info *info)
-{
-	kfree(info);
-}
-
 static int sm501fb_init_fb(struct fb_info *fb,
 			   enum sm501_controller head,
 			   const char *fbname)
@@ -1557,36 +1533,93 @@ static struct sm501_platdata_fb sm501fb_def_pdata = {
 static char driver_name_crt[] = "sm501fb-crt";
 static char driver_name_pnl[] = "sm501fb-panel";
 
-static int __init sm501fb_probe(struct platform_device *pdev)
+static int __devinit sm501fb_probe_one(struct sm501fb_info *info,
+				       enum sm501_controller head)
 {
-	struct sm501fb_info *info;
-	struct device	    *dev = &pdev->dev;
-	struct fb_info	    *fbinfo_crt;
-	struct fb_info	    *fbinfo_pnl;
-	int		     ret;
+	unsigned char *name = (head == HEAD_CRT) ? "crt" : "panel";
+	struct sm501_platdata_fbsub *pd;
+	struct sm501fb_par *par;
+	struct fb_info *fbi;
 
-	/* allocate our framebuffers */
+	pd = (head == HEAD_CRT) ? info->pdata->fb_crt : info->pdata->fb_pnl;
 
-	fbinfo_crt = framebuffer_alloc(sizeof(struct sm501fb_par), dev);
-	if (fbinfo_crt == NULL) {
-		dev_err(dev, "cannot allocate crt framebuffer\n");
+	/* Do not initialise if we've not been given any platform data */
+	if (pd == NULL) {
+		dev_info(info->dev, "no data for fb %s (disabled)\n", name);
+		return 0;
+	}
+
+	fbi = framebuffer_alloc(sizeof(struct sm501fb_par), info->dev);
+	if (fbi == NULL) {
+		dev_err(info->dev, "cannot allocate %s framebuffer\n", name);
 		return -ENOMEM;
 	}
 
-	fbinfo_pnl = framebuffer_alloc(sizeof(struct sm501fb_par), dev);
-	if (fbinfo_pnl == NULL) {
-		dev_err(dev, "cannot allocate panel framebuffer\n");
-		ret = -ENOMEM;
-		goto fbinfo_crt_alloc_fail;
+	par = fbi->par;
+	par->info = info;
+	par->head = head;
+	fbi->pseudo_palette = &par->pseudo_palette;
+
+	info->fb[head] = fbi;
+
+	return 0;
+}
+
+/* Free up anything allocated by sm501fb_init_fb */
+
+static void sm501_free_init_fb(struct sm501fb_info *info,
+				enum sm501_controller head)
+{
+	struct fb_info *fbi = info->fb[head];
+
+	fb_dealloc_cmap(&fbi->cmap);
+}
+
+static int __devinit sm501fb_start_one(struct sm501fb_info *info,
+				       enum sm501_controller head,
+				       const char *drvname)
+{
+	struct fb_info *fbi = info->fb[head];
+	int ret;
+
+	if (!fbi)
+		return 0;
+
+	ret = sm501fb_init_fb(info->fb[head], head, drvname);
+	if (ret) {
+		dev_err(info->dev, "cannot initialise fb %s\n", drvname);
+		return ret;
+	}
+
+	ret = register_framebuffer(info->fb[head]);
+	if (ret) {
+		dev_err(info->dev, "failed to register fb %s\n", drvname);
+		sm501_free_init_fb(info, head);
+		return ret;
 	}
 
-	info = sm501fb_info_alloc(fbinfo_crt, fbinfo_pnl);
-	if (info == NULL) {
-		dev_err(dev, "cannot allocate par\n");
-		ret = -ENOMEM;
-		goto sm501fb_alloc_fail;
+	dev_info(info->dev, "fb%d: %s frame buffer\n", fbi->node, fbi->fix.id);
+
+	return 0;
+}
+
+static int __devinit sm501fb_probe(struct platform_device *pdev)
+{
+	struct sm501fb_info *info;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	/* allocate our framebuffers */
+
+	info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL);
+	if (!info) {
+		dev_err(dev, "failed to allocate state\n");
+		return -ENOMEM;
 	}
 
+	info->dev = dev = &pdev->dev;
+	platform_set_drvdata(pdev, info);
+
 	if (dev->parent->platform_data) {
 		struct sm501_platdata *pd = dev->parent->platform_data;
 		info->pdata = pd->fb;
@@ -1597,90 +1630,88 @@ static int __init sm501fb_probe(struct platform_device *pdev)
 		info->pdata = &sm501fb_def_pdata;
 	}
 
-	/* start the framebuffers */
+	/* probe for the presence of each panel */
 
-	ret = sm501fb_start(info, pdev);
-	if (ret) {
-		dev_err(dev, "cannot initialise SM501\n");
-		goto sm501fb_start_fail;
+	ret = sm501fb_probe_one(info, HEAD_CRT);
+	if (ret < 0) {
+		dev_err(dev, "failed to probe CRT\n");
+		goto err_alloc;
 	}
 
-	/* CRT framebuffer setup */
+	ret = sm501fb_probe_one(info, HEAD_PANEL);
+	if (ret < 0) {
+		dev_err(dev, "failed to probe PANEL\n");
+		goto err_probed_crt;
+	}
 
-	ret = sm501fb_init_fb(fbinfo_crt, HEAD_CRT, driver_name_crt);
-	if (ret) {
-		dev_err(dev, "cannot initialise CRT fb\n");
-		goto sm501fb_start_fail;
+	if (info->fb[HEAD_PANEL] == NULL &&
+	    info->fb[HEAD_CRT] == NULL) {
+		dev_err(dev, "no framebuffers found\n");
+		goto err_alloc;
 	}
 
-	/* Panel framebuffer setup */
+	/* get the resources for both of the framebuffers */
 
-	ret = sm501fb_init_fb(fbinfo_pnl, HEAD_PANEL, driver_name_pnl);
+	ret = sm501fb_start(info, pdev);
 	if (ret) {
-		dev_err(dev, "cannot initialise Panel fb\n");
-		goto sm501fb_start_fail;
+		dev_err(dev, "cannot initialise SM501\n");
+		goto err_probed_panel;
 	}
 
-	/* register framebuffers */
-
-	ret = register_framebuffer(fbinfo_crt);
-	if (ret < 0) {
-		dev_err(dev, "failed to register CRT fb (%d)\n", ret);
-		goto register_crt_fail;
+	ret = sm501fb_start_one(info, HEAD_CRT, driver_name_crt);
+	if (ret) {
+		dev_err(dev, "failed to start CRT\n");
+		goto err_started;
 	}
 
-	ret = register_framebuffer(fbinfo_pnl);
-	if (ret < 0) {
-		dev_err(dev, "failed to register panel fb (%d)\n", ret);
-		goto register_pnl_fail;
+	ret = sm501fb_start_one(info, HEAD_PANEL, driver_name_pnl);
+	if (ret) {
+		dev_err(dev, "failed to start Panel\n");
+		goto err_started_crt;
 	}
 
-	dev_info(dev, "fb%d: %s frame buffer device\n",
-		 fbinfo_crt->node, fbinfo_crt->fix.id);
-
-	dev_info(dev, "fb%d: %s frame buffer device\n",
-	       fbinfo_pnl->node, fbinfo_pnl->fix.id);
-
 	/* create device files */
 
 	ret = device_create_file(dev, &dev_attr_crt_src);
 	if (ret)
-		goto crtsrc_fail;
+		goto err_started_panel;
 
 	ret = device_create_file(dev, &dev_attr_fbregs_pnl);
 	if (ret)
-		goto fbregs_pnl_fail;
+		goto err_attached_crtsrc_file;
 
 	ret = device_create_file(dev, &dev_attr_fbregs_crt);
 	if (ret)
-		goto fbregs_crt_fail;
+		goto err_attached_pnlregs_file;
 
 	/* we registered, return ok */
 	return 0;
 
- fbregs_crt_fail:
+err_attached_pnlregs_file:
 	device_remove_file(dev, &dev_attr_fbregs_pnl);
 
- fbregs_pnl_fail:
+err_attached_crtsrc_file:
 	device_remove_file(dev, &dev_attr_crt_src);
 
- crtsrc_fail:
-	unregister_framebuffer(fbinfo_pnl);
+err_started_panel:
+	unregister_framebuffer(info->fb[HEAD_PANEL]);
+	sm501_free_init_fb(info, HEAD_PANEL);
 
- register_pnl_fail:
-	unregister_framebuffer(fbinfo_crt);
+err_started_crt:
+	unregister_framebuffer(info->fb[HEAD_CRT]);
+	sm501_free_init_fb(info, HEAD_CRT);
 
- register_crt_fail:
+err_started:
 	sm501fb_stop(info);
 
- sm501fb_start_fail:
-	sm501fb_info_release(info);
+err_probed_panel:
+	framebuffer_release(info->fb[HEAD_PANEL]);
 
- sm501fb_alloc_fail:
-	framebuffer_release(fbinfo_pnl);
+err_probed_crt:
+	framebuffer_release(info->fb[HEAD_CRT]);
 
- fbinfo_crt_alloc_fail:
-	framebuffer_release(fbinfo_crt);
+err_alloc:
+	kfree(info);
 
 	return ret;
 }
@@ -1699,11 +1730,14 @@ static int sm501fb_remove(struct platform_device *pdev)
 	device_remove_file(&pdev->dev, &dev_attr_fbregs_pnl);
 	device_remove_file(&pdev->dev, &dev_attr_crt_src);
 
+	sm501_free_init_fb(info, HEAD_CRT);
+	sm501_free_init_fb(info, HEAD_PANEL);
+
 	unregister_framebuffer(fbinfo_crt);
 	unregister_framebuffer(fbinfo_pnl);
 
 	sm501fb_stop(info);
-	sm501fb_info_release(info);
+	kfree(info);
 
 	framebuffer_release(fbinfo_pnl);
 	framebuffer_release(fbinfo_crt);
-- 
cgit v1.2.3


From d05254190dd1a4751284f4a51efb70fcc16c45a4 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 23 Jul 2008 21:31:37 -0700
Subject: sm501: fixup allocation code to be 64bit resource compliant

As pointed out by Andrew Morton, we have a problem when setting the 64bit
resources option.  Alter the allocation routines to remove the need to use
the start and end fields, use the proper HEAD_PANEL/HEAD_CRT and update
the comments.

Note, we also fix the bug where we failed to check the size of the
CRT memory allocation.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/sm501fb.c | 53 +++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 42 insertions(+), 11 deletions(-)

diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index b473cf665d8..f94ae84a58c 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -48,10 +48,15 @@ enum sm501_controller {
 	HEAD_PANEL	= 1,
 };
 
-/* SM501 memory address */
+/* SM501 memory address.
+ *
+ * This structure is used to track memory usage within the SM501 framebuffer
+ * allocation. The sm_addr field is stored as an offset as it is often used
+ * against both the physical and mapped addresses.
+ */
 struct sm501_mem {
 	unsigned long	 size;
-	unsigned long	 sm_addr;
+	unsigned long	 sm_addr;	/* offset from base of sm501 fb. */
 	void __iomem	*k_addr;
 };
 
@@ -142,37 +147,63 @@ static inline void sm501fb_sync_regs(struct sm501fb_info *info)
 static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
 			   unsigned int why, size_t size)
 {
-	unsigned int ptr = 0;
-	unsigned int end;
+	struct sm501fb_par *par;
 	struct fb_info *fbi;
+	unsigned int ptr;
+	unsigned int end;
 
 	switch (why) {
 	case SM501_MEMF_CURSOR:
 		ptr = inf->fbmem_len - size;
-		inf->fbmem_len = ptr;
+		inf->fbmem_len = ptr;	/* adjust available memory. */
 		break;
 
 	case SM501_MEMF_PANEL:
 		ptr = inf->fbmem_len - size;
-		fbi = inf->fb[0];
+		fbi = inf->fb[HEAD_CRT];
+
+		/* round down, some programs such as directfb do not draw
+		 * 0,0 correctly unless the start is aligned to a page start.
+		 */
+
+		if (ptr > 0)
+			ptr &= ~(PAGE_SIZE - 1);
 
 		if (fbi && ptr < fbi->fix.smem_len)
 			return -ENOMEM;
 
+		if (ptr < 0)
+			return -ENOMEM;
+
 		break;
 
 	case SM501_MEMF_CRT:
 		ptr = 0;
+
+		/* check to see if we have panel memory allocated
+		 * which would put an limit on available memory. */
+
+		fbi = inf->fb[HEAD_PANEL];
+		if (fbi) {
+			par = fbi->par;
+			end = par->screen.k_addr ? par->screen.sm_addr : inf->fbmem_len;
+		} else
+			end = inf->fbmem_len;
+
+		if ((ptr + size) > end)
+			return -ENOMEM;
+
 		break;
 
 	case SM501_MEMF_ACCEL:
-		fbi = inf->fb[0];
+		fbi = inf->fb[HEAD_CRT];
 		ptr = fbi ? fbi->fix.smem_len : 0;
 
-		fbi = inf->fb[1];
-		if (fbi)
-			end = (fbi->fix.smem_start - inf->fbmem_res->start);
-		else
+		fbi = inf->fb[HEAD_PANEL];
+		if (fbi) {
+			par = fbi->par;
+			end = par->screen.sm_addr;
+		} else
 			end = inf->fbmem_len;
 
 		if ((ptr + size) > end)
-- 
cgit v1.2.3


From cccb6d3c149603b9c15d3c460dff317455df1766 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 23 Jul 2008 21:31:37 -0700
Subject: fb: add support for the ILI9320 video display controller

Provide support for the ILI9320 display controller chip which is found in
many LCD displays.  Included with this is support for an example LCD using
this chip, the VGG2432A4.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/Kconfig     |  17 ++
 drivers/video/backlight/Makefile    |   4 +-
 drivers/video/backlight/ili9320.c   | 330 ++++++++++++++++++++++++++++++++++++
 drivers/video/backlight/ili9320.h   |  80 +++++++++
 drivers/video/backlight/vgg2432a4.c | 284 +++++++++++++++++++++++++++++++
 include/video/ili9320.h             | 201 ++++++++++++++++++++++
 6 files changed, 915 insertions(+), 1 deletion(-)
 create mode 100644 drivers/video/backlight/ili9320.c
 create mode 100644 drivers/video/backlight/ili9320.h
 create mode 100644 drivers/video/backlight/vgg2432a4.c
 create mode 100644 include/video/ili9320.h

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 30bf7f2f163..a5b3a92ffdc 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -36,6 +36,23 @@ config LCD_LTV350QV
 
 	  The LTV350QV panel is present on all ATSTK1000 boards.
 
+config LCD_ILI9320
+	tristate
+	depends on LCD_CLASS_DEVICE && BACKLIGHT_LCD_SUPPORT
+	default n
+	help
+	  If you have a panel based on the ILI9320 controller chip
+	  then say y to include a power driver for it.
+
+config LCD_VGG2432A4
+	tristate "VGG2432A4 LCM device support"
+	depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER
+	select LCD_ILI9320
+	default n
+	help
+	  If you have a VGG2432A4 panel based on the ILI9320 controller chip
+	  then say y to include a power driver for it.
+
 #
 # Backlight
 #
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b51a7cd1250..366d84e380c 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -1,7 +1,9 @@
 # Backlight & LCD drivers
 
 obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
-obj-$(CONFIG_LCD_LTV350QV)	+= ltv350qv.o
+obj-$(CONFIG_LCD_LTV350QV)	   += ltv350qv.o
+obj-$(CONFIG_LCD_ILI9320)	   += ili9320.o
+obj-$(CONFIG_LCD_VGG2432A4)	   += vgg2432a4.o
 
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
 obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c
new file mode 100644
index 00000000000..ba89b41b639
--- /dev/null
+++ b/drivers/video/backlight/ili9320.c
@@ -0,0 +1,330 @@
+/* drivers/video/backlight/ili9320.c
+ *
+ * ILI9320 LCD controller driver core.
+ *
+ * Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/lcd.h>
+#include <linux/module.h>
+
+#include <linux/spi/spi.h>
+
+#include <video/ili9320.h>
+
+#include "ili9320.h"
+
+
+static inline int ili9320_write_spi(struct ili9320 *ili,
+				    unsigned int reg,
+				    unsigned int value)
+{
+	struct ili9320_spi *spi = &ili->access.spi;
+	unsigned char *addr = spi->buffer_addr;
+	unsigned char *data = spi->buffer_data;
+
+	/* spi message consits of:
+	 * first byte: ID and operation
+	 */
+
+	addr[0] = spi->id | ILI9320_SPI_INDEX | ILI9320_SPI_WRITE;
+	addr[1] = reg >> 8;
+	addr[2] = reg;
+
+	/* second message is the data to transfer */
+
+	data[0] = spi->id | ILI9320_SPI_DATA  | ILI9320_SPI_WRITE;
+ 	data[1] = value >> 8;
+	data[2] = value;
+
+	return spi_sync(spi->dev, &spi->message);
+}
+
+int ili9320_write(struct ili9320 *ili, unsigned int reg, unsigned int value)
+{
+	dev_dbg(ili->dev, "write: reg=%02x, val=%04x\n", reg, value);
+	return ili->write(ili, reg, value);
+}
+
+EXPORT_SYMBOL_GPL(ili9320_write);
+
+int ili9320_write_regs(struct ili9320 *ili,
+		       struct ili9320_reg *values,
+		       int nr_values)
+{
+	int index;
+	int ret;
+
+	for (index = 0; index < nr_values; index++, values++) {
+		ret = ili9320_write(ili, values->address, values->value);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(ili9320_write_regs);
+
+static void ili9320_reset(struct ili9320 *lcd)
+{
+	struct ili9320_platdata *cfg = lcd->platdata;
+
+	cfg->reset(1);
+	mdelay(50);
+
+	cfg->reset(0);
+	mdelay(50);
+
+	cfg->reset(1);
+	mdelay(100);
+}
+
+static inline int ili9320_init_chip(struct ili9320 *lcd)
+{
+	int ret;
+
+	ili9320_reset(lcd);
+
+	ret = lcd->client->init(lcd, lcd->platdata);
+	if (ret != 0) {
+		dev_err(lcd->dev, "failed to initialise display\n");
+		return ret;
+	}
+
+	lcd->initialised = 1;
+	return 0;
+}
+
+static inline int ili9320_power_on(struct ili9320 *lcd)
+{
+	if (!lcd->initialised)
+		ili9320_init_chip(lcd);
+
+	lcd->display1 |= (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
+	ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
+
+	return 0;
+}
+
+static inline int ili9320_power_off(struct ili9320 *lcd)
+{
+	lcd->display1 &= ~(ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE);
+	ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
+
+	return 0;
+}
+
+#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
+
+static int ili9320_power(struct ili9320 *lcd, int power)
+{
+	int ret = 0;
+
+	dev_dbg(lcd->dev, "power %d => %d\n", lcd->power, power);
+
+	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+		ret = ili9320_power_on(lcd);
+	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+		ret = ili9320_power_off(lcd);
+
+	if (ret == 0)
+		lcd->power = power;
+	else
+		dev_warn(lcd->dev, "failed to set power mode %d\n", power);
+
+	return ret;
+}
+
+static inline struct ili9320 *to_our_lcd(struct lcd_device *lcd)
+{
+	return lcd_get_data(lcd);
+}
+
+static int ili9320_set_power(struct lcd_device *ld, int power)
+{
+	struct ili9320 *lcd = to_our_lcd(ld);
+
+	return ili9320_power(lcd, power);
+}
+
+static int ili9320_get_power(struct lcd_device *ld)
+{
+	struct ili9320 *lcd = to_our_lcd(ld);
+
+	return lcd->power;
+}
+
+static struct lcd_ops ili9320_ops = {
+	.get_power	= ili9320_get_power,
+	.set_power	= ili9320_set_power,
+};
+
+static void __devinit ili9320_setup_spi(struct ili9320 *ili,
+					struct spi_device *dev)
+{
+	struct ili9320_spi *spi = &ili->access.spi;
+
+	ili->write = ili9320_write_spi;
+	spi->dev = dev;
+
+	/* fill the two messages we are going to use to send the data
+	 * with, the first the address followed by the data. The datasheet
+	 * says they should be done as two distinct cycles of the SPI CS line.
+	 */
+
+	spi->xfer[0].tx_buf = spi->buffer_addr;
+	spi->xfer[1].tx_buf = spi->buffer_data;
+	spi->xfer[0].len = 3;
+	spi->xfer[1].len = 3;
+	spi->xfer[0].bits_per_word = 8;
+	spi->xfer[1].bits_per_word = 8;
+	spi->xfer[0].cs_change = 1;
+
+	spi_message_init(&spi->message);
+	spi_message_add_tail(&spi->xfer[0], &spi->message);
+	spi_message_add_tail(&spi->xfer[1], &spi->message);
+}
+
+int __devinit ili9320_probe_spi(struct spi_device *spi,
+				struct ili9320_client *client)
+{
+	struct ili9320_platdata *cfg = spi->dev.platform_data;
+	struct device *dev = &spi->dev;
+	struct ili9320 *ili;
+	struct lcd_device *lcd;
+	int ret = 0;
+
+	/* verify we where given some information */
+
+	if (cfg == NULL) {
+		dev_err(dev, "no platform data supplied\n");
+		return -EINVAL;
+	}
+
+	if (cfg->hsize <= 0 || cfg->vsize <= 0 || cfg->reset == NULL) {
+		dev_err(dev, "invalid platform data supplied\n");
+		return -EINVAL;
+	}
+
+	/* allocate and initialse our state */
+
+	ili = kzalloc(sizeof(struct ili9320), GFP_KERNEL);
+	if (ili == NULL) {
+		dev_err(dev, "no memory for device\n");
+		return -ENOMEM;
+	}
+
+	ili->access.spi.id = ILI9320_SPI_IDCODE | ILI9320_SPI_ID(1);
+
+	ili->dev = dev;
+	ili->client = client;
+	ili->power = FB_BLANK_POWERDOWN;
+	ili->platdata = cfg;
+
+	dev_set_drvdata(&spi->dev, ili);
+
+	ili9320_setup_spi(ili, spi);
+
+	lcd = lcd_device_register("ili9320", dev, ili, &ili9320_ops);
+	if (IS_ERR(lcd)) {
+		dev_err(dev, "failed to register lcd device\n");
+		ret = PTR_ERR(lcd);
+		goto err_free;
+	}
+
+	ili->lcd = lcd;
+
+	dev_info(dev, "initialising %s\n", client->name);
+
+	ret = ili9320_power(ili, FB_BLANK_UNBLANK);
+	if (ret != 0) {
+		dev_err(dev, "failed to set lcd power state\n");
+		goto err_unregister;
+	}
+
+	return 0;
+
+ err_unregister:
+	lcd_device_unregister(lcd);
+
+ err_free:
+	kfree(ili);
+
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(ili9320_probe_spi);
+
+int __devexit ili9320_remove(struct ili9320 *ili)
+{
+	ili9320_power(ili, FB_BLANK_POWERDOWN);
+
+	lcd_device_unregister(ili->lcd);
+	kfree(ili);
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(ili9320_remove);
+
+#ifdef CONFIG_PM
+int ili9320_suspend(struct ili9320 *lcd, pm_message_t state)
+{
+	int ret;
+
+	dev_dbg(lcd->dev, "%s: event %d\n", __func__, state.event);
+
+	if (state.event == PM_EVENT_SUSPEND) {
+		ret = ili9320_power(lcd, FB_BLANK_POWERDOWN);
+
+		if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) {
+			ili9320_write(lcd, ILI9320_POWER1, lcd->power1 |
+				      ILI9320_POWER1_SLP |
+				      ILI9320_POWER1_DSTB);
+			lcd->initialised = 0;
+		}
+
+		return ret;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(ili9320_suspend);
+
+int ili9320_resume(struct ili9320 *lcd)
+{
+	dev_info(lcd->dev, "resuming from power state %d\n", lcd->power);
+
+	if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) {
+		ili9320_write(lcd, ILI9320_POWER1, 0x00);
+	}
+
+	return ili9320_power(lcd, FB_BLANK_UNBLANK);
+}
+
+EXPORT_SYMBOL_GPL(ili9320_resume);
+#endif
+
+/* Power down all displays on reboot, poweroff or halt */
+void ili9320_shutdown(struct ili9320 *lcd)
+{
+	ili9320_power(lcd, FB_BLANK_POWERDOWN);
+}
+
+EXPORT_SYMBOL_GPL(ili9320_shutdown);
+
+MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
+MODULE_DESCRIPTION("ILI9320 LCD Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/ili9320.h b/drivers/video/backlight/ili9320.h
new file mode 100644
index 00000000000..e388eca7cac
--- /dev/null
+++ b/drivers/video/backlight/ili9320.h
@@ -0,0 +1,80 @@
+/* drivers/video/backlight/ili9320.h
+ *
+ * ILI9320 LCD controller driver core.
+ *
+ * Copyright 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Holder for register and value pairs. */
+struct ili9320_reg {
+	unsigned short		address;
+	unsigned short		value;
+};
+
+struct ili9320;
+
+struct ili9320_client {
+	const char	*name;
+	int	(*init)(struct ili9320 *ili, struct ili9320_platdata *cfg);
+
+};
+/* Device attached via an SPI bus. */
+struct  ili9320_spi {
+	struct spi_device	*dev;
+	struct spi_message	message;
+	struct spi_transfer	xfer[2];
+
+	unsigned char		id;
+	unsigned char		buffer_addr[4];
+	unsigned char		buffer_data[4];
+};
+
+/* ILI9320 device state. */
+struct ili9320 {
+	union {
+		struct ili9320_spi	spi;	/* SPI attachged device. */
+	} access;				/* Register access method. */
+
+	struct device			*dev;
+	struct lcd_device		*lcd;	/* LCD device we created. */
+	struct ili9320_client		*client;
+	struct ili9320_platdata		*platdata;
+
+	int				 power; /* current power state. */
+	int				 initialised;
+
+	unsigned short			 display1;
+	unsigned short			 power1;
+
+	int (*write)(struct ili9320 *ili, unsigned int reg, unsigned int val);
+};
+
+
+/* ILI9320 register access routines */
+
+extern int ili9320_write(struct ili9320 *ili,
+			 unsigned int reg, unsigned int value);
+
+extern int ili9320_write_regs(struct ili9320 *ili,
+			      struct ili9320_reg *values,
+			      int nr_values);
+
+/* Device probe */
+
+extern int ili9320_probe_spi(struct spi_device *spi,
+			     struct ili9320_client *cli);
+
+extern int ili9320_remove(struct ili9320 *lcd);
+extern void ili9320_shutdown(struct ili9320 *lcd);
+
+/* PM */
+
+extern int ili9320_suspend(struct ili9320 *lcd, pm_message_t state);
+extern int ili9320_resume(struct ili9320 *lcd);
diff --git a/drivers/video/backlight/vgg2432a4.c b/drivers/video/backlight/vgg2432a4.c
new file mode 100644
index 00000000000..593c7687d54
--- /dev/null
+++ b/drivers/video/backlight/vgg2432a4.c
@@ -0,0 +1,284 @@
+/* drivers/video/backlight/vgg2432a4.c
+ *
+ * VGG2432A4 (ILI9320) LCD controller driver.
+ *
+ * Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/lcd.h>
+#include <linux/module.h>
+
+#include <linux/spi/spi.h>
+
+#include <video/ili9320.h>
+
+#include "ili9320.h"
+
+/* Device initialisation sequences */
+
+static struct ili9320_reg vgg_init1[] = {
+	{
+		.address = ILI9320_POWER1,
+		.value	 = ILI9320_POWER1_AP(0) | ILI9320_POWER1_BT(0),
+	}, {
+		.address = ILI9320_POWER2,
+		.value	 = (ILI9320_POWER2_VC(7) |
+			    ILI9320_POWER2_DC0(0) | ILI9320_POWER2_DC1(0)),
+	}, {
+		.address = ILI9320_POWER3,
+		.value	 = ILI9320_POWER3_VRH(0),
+	}, {
+		.address = ILI9320_POWER4,
+		.value	 = ILI9320_POWER4_VREOUT(0),
+	},
+};
+
+static struct ili9320_reg vgg_init2[] = {
+	{
+		.address = ILI9320_POWER1,
+		.value   = (ILI9320_POWER1_AP(3) | ILI9320_POWER1_APE |
+			    ILI9320_POWER1_BT(7) | ILI9320_POWER1_SAP),
+	}, {
+		.address = ILI9320_POWER2,
+		.value   = ILI9320_POWER2_VC(7) | ILI9320_POWER2_DC0(3),
+	}
+};
+
+static struct ili9320_reg vgg_gamma[] = {
+	{
+		.address = ILI9320_GAMMA1,
+		.value	 = 0x0000,
+	}, {
+		.address = ILI9320_GAMMA2,
+		.value   = 0x0505,
+	}, {
+		.address = ILI9320_GAMMA3,
+		.value	 = 0x0004,
+	}, {
+		.address = ILI9320_GAMMA4,
+		.value	 = 0x0006,
+	}, {
+		.address = ILI9320_GAMMA5,
+		.value	 = 0x0707,
+	}, {
+		.address = ILI9320_GAMMA6,
+		.value	 = 0x0105,
+	}, {
+		.address = ILI9320_GAMMA7,
+		.value	 = 0x0002,
+	}, {
+		.address = ILI9320_GAMMA8,
+		.value	 = 0x0707,
+	}, {
+		.address = ILI9320_GAMMA9,
+		.value	 = 0x0704,
+	}, {
+		.address = ILI9320_GAMMA10,
+		.value	 = 0x807,
+	}
+
+};
+
+static struct ili9320_reg vgg_init0[] = {
+	[0]	= {
+		/* set direction and scan mode gate */
+		.address = ILI9320_DRIVER,
+		.value	 = ILI9320_DRIVER_SS,
+	}, {
+		.address = ILI9320_DRIVEWAVE,
+		.value	 = (ILI9320_DRIVEWAVE_MUSTSET |
+			    ILI9320_DRIVEWAVE_EOR | ILI9320_DRIVEWAVE_BC),
+	}, {
+		.address = ILI9320_ENTRYMODE,
+		.value	 = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
+	}, {
+		.address = ILI9320_RESIZING,
+		.value	 = 0x0,
+	},
+};
+
+
+static int vgg2432a4_lcd_init(struct ili9320 *lcd,
+			      struct ili9320_platdata *cfg)
+{
+	unsigned int addr;
+	int ret;
+
+	/* Set VCore before anything else (VGG243237-6UFLWA) */
+	ret = ili9320_write(lcd, 0x00e5, 0x8000);
+	if (ret)
+		goto err_initial;
+
+	/* Start the oscillator up before we can do anything else. */
+	ret = ili9320_write(lcd, ILI9320_OSCILATION, ILI9320_OSCILATION_OSC);
+	if (ret)
+		goto err_initial;
+
+	/* must wait at-lesat 10ms after starting */
+	mdelay(15);
+
+	ret = ili9320_write_regs(lcd, vgg_init0, ARRAY_SIZE(vgg_init0));
+	if (ret != 0)
+		goto err_initial;
+
+	ili9320_write(lcd, ILI9320_DISPLAY2, cfg->display2);
+	ili9320_write(lcd, ILI9320_DISPLAY3, cfg->display3);
+	ili9320_write(lcd, ILI9320_DISPLAY4, cfg->display4);
+
+	ili9320_write(lcd, ILI9320_RGB_IF1, cfg->rgb_if1);
+	ili9320_write(lcd, ILI9320_FRAMEMAKER, 0x0);
+	ili9320_write(lcd, ILI9320_RGB_IF2, ILI9320_RGBIF2_DPL);
+
+	ret = ili9320_write_regs(lcd, vgg_init1, ARRAY_SIZE(vgg_init1));
+	if (ret != 0)
+		goto err_vgg;
+
+	mdelay(300);
+
+	ret = ili9320_write_regs(lcd, vgg_init2, ARRAY_SIZE(vgg_init2));
+	if (ret != 0)
+		goto err_vgg2;
+
+	mdelay(100);
+
+	ili9320_write(lcd, ILI9320_POWER3, 0x13c);
+
+	mdelay(100);
+
+	ili9320_write(lcd, ILI9320_POWER4, 0x1c00);
+	ili9320_write(lcd, ILI9320_POWER7, 0x000e);
+
+	mdelay(100);
+
+	ili9320_write(lcd, ILI9320_GRAM_HORIZ_ADDR, 0x00);
+	ili9320_write(lcd, ILI9320_GRAM_VERT_ADD, 0x00);
+
+	ret = ili9320_write_regs(lcd, vgg_gamma, ARRAY_SIZE(vgg_gamma));
+	if (ret != 0)
+		goto err_vgg3;
+
+	ili9320_write(lcd, ILI9320_HORIZ_START, 0x0);
+	ili9320_write(lcd, ILI9320_HORIZ_END, cfg->hsize - 1);
+	ili9320_write(lcd, ILI9320_VERT_START, 0x0);
+	ili9320_write(lcd, ILI9320_VERT_END, cfg->vsize - 1);
+
+	ili9320_write(lcd, ILI9320_DRIVER2,
+		      ILI9320_DRIVER2_NL(((cfg->vsize - 240) / 8) + 0x1D));
+
+	ili9320_write(lcd, ILI9320_BASE_IMAGE, 0x1);
+	ili9320_write(lcd, ILI9320_VERT_SCROLL, 0x00);
+
+	for (addr = ILI9320_PARTIAL1_POSITION; addr <= ILI9320_PARTIAL2_END;
+	     addr++) {
+		ili9320_write(lcd, addr, 0x0);
+	}
+
+	ili9320_write(lcd, ILI9320_INTERFACE1, 0x10);
+	ili9320_write(lcd, ILI9320_INTERFACE2, cfg->interface2);
+	ili9320_write(lcd, ILI9320_INTERFACE3, cfg->interface3);
+	ili9320_write(lcd, ILI9320_INTERFACE4, cfg->interface4);
+	ili9320_write(lcd, ILI9320_INTERFACE5, cfg->interface5);
+	ili9320_write(lcd, ILI9320_INTERFACE6, cfg->interface6);
+
+	lcd->display1 = (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_DTE |
+			 ILI9320_DISPLAY1_GON | ILI9320_DISPLAY1_BASEE |
+			 0x40);
+
+	ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
+
+	return 0;
+
+ err_vgg3:
+ err_vgg2:
+ err_vgg:
+ err_initial:
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int vgg2432a4_suspend(struct spi_device *spi, pm_message_t state)
+{
+	return ili9320_suspend(dev_get_drvdata(&spi->dev), state);
+}
+
+static int vgg2432a4_resume(struct spi_device *spi)
+{
+	return ili9320_resume(dev_get_drvdata(&spi->dev));
+}
+#else
+#define vgg2432a4_suspend	NULL
+#define vgg2432a4_resume 	NULL
+#endif
+
+static struct ili9320_client vgg2432a4_client = {
+	.name	= "VGG2432A4",
+	.init	= vgg2432a4_lcd_init,
+};
+
+/* Device probe */
+
+static int __devinit vgg2432a4_probe(struct spi_device *spi)
+{
+	int ret;
+
+	ret = ili9320_probe_spi(spi, &vgg2432a4_client);
+	if (ret != 0) {
+		dev_err(&spi->dev, "failed to initialise ili9320\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __devexit vgg2432a4_remove(struct spi_device *spi)
+{
+	return ili9320_remove(dev_get_drvdata(&spi->dev));
+}
+
+static void vgg2432a4_shutdown(struct spi_device *spi)
+{
+	ili9320_shutdown(dev_get_drvdata(&spi->dev));
+}
+
+static struct spi_driver vgg2432a4_driver = {
+	.driver = {
+		.name		= "VGG2432A4",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= vgg2432a4_probe,
+	.remove		= __devexit_p(vgg2432a4_remove),
+	.shutdown	= vgg2432a4_shutdown,
+	.suspend	= vgg2432a4_suspend,
+	.resume		= vgg2432a4_resume,
+};
+
+/* Device driver initialisation */
+
+static int __init vgg2432a4_init(void)
+{
+	return spi_register_driver(&vgg2432a4_driver);
+}
+
+static void __exit vgg2432a4_exit(void)
+{
+	spi_unregister_driver(&vgg2432a4_driver);
+}
+
+module_init(vgg2432a4_init);
+module_exit(vgg2432a4_exit);
+
+MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
+MODULE_DESCRIPTION("VGG2432A4 LCD Driver");
+MODULE_LICENSE("GPL v2");
+
+
diff --git a/include/video/ili9320.h b/include/video/ili9320.h
new file mode 100644
index 00000000000..e5d1622e3f3
--- /dev/null
+++ b/include/video/ili9320.h
@@ -0,0 +1,201 @@
+/* include/video/ili9320.c
+ *
+ * ILI9320 LCD controller configuration control.
+ *
+ * Copyright 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define ILI9320_REG(x)	(x)
+
+#define ILI9320_INDEX			ILI9320_REG(0x00)
+
+#define ILI9320_OSCILATION		ILI9320_REG(0x00)
+#define ILI9320_DRIVER			ILI9320_REG(0x01)
+#define ILI9320_DRIVEWAVE		ILI9320_REG(0x02)
+#define ILI9320_ENTRYMODE		ILI9320_REG(0x03)
+#define ILI9320_RESIZING		ILI9320_REG(0x04)
+#define ILI9320_DISPLAY1		ILI9320_REG(0x07)
+#define ILI9320_DISPLAY2		ILI9320_REG(0x08)
+#define ILI9320_DISPLAY3		ILI9320_REG(0x09)
+#define ILI9320_DISPLAY4		ILI9320_REG(0x0A)
+#define ILI9320_RGB_IF1			ILI9320_REG(0x0C)
+#define ILI9320_FRAMEMAKER		ILI9320_REG(0x0D)
+#define ILI9320_RGB_IF2			ILI9320_REG(0x0F)
+
+#define ILI9320_POWER1			ILI9320_REG(0x10)
+#define ILI9320_POWER2			ILI9320_REG(0x11)
+#define ILI9320_POWER3			ILI9320_REG(0x12)
+#define ILI9320_POWER4			ILI9320_REG(0x13)
+#define ILI9320_GRAM_HORIZ_ADDR		ILI9320_REG(0x20)
+#define ILI9320_GRAM_VERT_ADD		ILI9320_REG(0x21)
+#define ILI9320_POWER7			ILI9320_REG(0x29)
+#define ILI9320_FRAME_RATE_COLOUR	ILI9320_REG(0x2B)
+
+#define ILI9320_GAMMA1			ILI9320_REG(0x30)
+#define ILI9320_GAMMA2			ILI9320_REG(0x31)
+#define ILI9320_GAMMA3			ILI9320_REG(0x32)
+#define ILI9320_GAMMA4			ILI9320_REG(0x35)
+#define ILI9320_GAMMA5			ILI9320_REG(0x36)
+#define ILI9320_GAMMA6			ILI9320_REG(0x37)
+#define ILI9320_GAMMA7			ILI9320_REG(0x38)
+#define ILI9320_GAMMA8			ILI9320_REG(0x39)
+#define ILI9320_GAMMA9			ILI9320_REG(0x3C)
+#define ILI9320_GAMMA10			ILI9320_REG(0x3D)
+
+#define ILI9320_HORIZ_START		ILI9320_REG(0x50)
+#define ILI9320_HORIZ_END		ILI9320_REG(0x51)
+#define ILI9320_VERT_START		ILI9320_REG(0x52)
+#define ILI9320_VERT_END		ILI9320_REG(0x53)
+
+#define ILI9320_DRIVER2			ILI9320_REG(0x60)
+#define ILI9320_BASE_IMAGE		ILI9320_REG(0x61)
+#define ILI9320_VERT_SCROLL		ILI9320_REG(0x6a)
+
+#define ILI9320_PARTIAL1_POSITION	ILI9320_REG(0x80)
+#define ILI9320_PARTIAL1_START		ILI9320_REG(0x81)
+#define ILI9320_PARTIAL1_END		ILI9320_REG(0x82)
+#define ILI9320_PARTIAL2_POSITION	ILI9320_REG(0x83)
+#define ILI9320_PARTIAL2_START		ILI9320_REG(0x84)
+#define ILI9320_PARTIAL2_END		ILI9320_REG(0x85)
+
+#define ILI9320_INTERFACE1		ILI9320_REG(0x90)
+#define ILI9320_INTERFACE2		ILI9320_REG(0x92)
+#define ILI9320_INTERFACE3		ILI9320_REG(0x93)
+#define ILI9320_INTERFACE4		ILI9320_REG(0x95)
+#define ILI9320_INTERFACE5		ILI9320_REG(0x97)
+#define ILI9320_INTERFACE6		ILI9320_REG(0x98)
+
+/* Register contents definitions. */
+
+#define ILI9320_OSCILATION_OSC		(1 << 0)
+
+#define ILI9320_DRIVER_SS		(1 << 8)
+#define ILI9320_DRIVER_SM		(1 << 10)
+
+#define ILI9320_DRIVEWAVE_EOR		(1 << 8)
+#define ILI9320_DRIVEWAVE_BC		(1 << 9)
+#define ILI9320_DRIVEWAVE_MUSTSET	(1 << 10)
+
+#define ILI9320_ENTRYMODE_AM		(1 << 3)
+#define ILI9320_ENTRYMODE_ID(x)		((x) << 4)
+#define ILI9320_ENTRYMODE_ORG		(1 << 7)
+#define ILI9320_ENTRYMODE_HWM		(1 << 8)
+#define ILI9320_ENTRYMODE_BGR		(1 << 12)
+#define ILI9320_ENTRYMODE_DFM		(1 << 14)
+#define ILI9320_ENTRYMODE_TRI		(1 << 15)
+
+
+#define ILI9320_RESIZING_RSZ(x)		((x) << 0)
+#define ILI9320_RESIZING_RCH(x)		((x) << 4)
+#define ILI9320_RESIZING_RCV(x)		((x) << 8)
+
+
+#define ILI9320_DISPLAY1_D(x)		((x) << 0)
+#define ILI9320_DISPLAY1_CL		(1 << 3)
+#define ILI9320_DISPLAY1_DTE		(1 << 4)
+#define ILI9320_DISPLAY1_GON		(1 << 5)
+#define ILI9320_DISPLAY1_BASEE		(1 << 8)
+#define ILI9320_DISPLAY1_PTDE(x)	((x) << 12)
+
+
+#define ILI9320_DISPLAY2_BP(x)		((x) << 0)
+#define ILI9320_DISPLAY2_FP(x)		((x) << 8)
+
+
+#define ILI9320_RGBIF1_RIM_RGB18	(0 << 0)
+#define ILI9320_RGBIF1_RIM_RGB16	(1 << 0)
+#define ILI9320_RGBIF1_RIM_RGB6		(2 << 0)
+
+#define ILI9320_RGBIF1_CLK_INT		(0 << 4)
+#define ILI9320_RGBIF1_CLK_RGBIF	(1 << 4)
+#define ILI9320_RGBIF1_CLK_VSYNC	(2 << 4)
+
+#define ILI9320_RGBIF1_RM		(1 << 8)
+
+#define ILI9320_RGBIF1_ENC_FRAMES(x)	(((x) - 1)<< 13)
+
+#define ILI9320_RGBIF2_DPL		(1 << 0)
+#define ILI9320_RGBIF2_EPL		(1 << 1)
+#define ILI9320_RGBIF2_HSPL		(1 << 3)
+#define ILI9320_RGBIF2_VSPL		(1 << 4)
+
+
+#define ILI9320_POWER1_SLP		(1 << 1)
+#define ILI9320_POWER1_DSTB		(1 << 2)
+#define ILI9320_POWER1_AP(x)		((x) << 4)
+#define ILI9320_POWER1_APE		(1 << 7)
+#define ILI9320_POWER1_BT(x)		((x) << 8)
+#define ILI9320_POWER1_SAP		(1 << 12)
+
+
+#define ILI9320_POWER2_VC(x)		((x) << 0)
+#define ILI9320_POWER2_DC0(x)		((x) << 4)
+#define ILI9320_POWER2_DC1(x)		((x) << 8)
+
+
+#define ILI9320_POWER3_VRH(x)		((x) << 0)
+#define ILI9320_POWER3_PON		(1 << 4)
+#define ILI9320_POWER3_VCMR		(1 << 8)
+
+
+#define ILI9320_POWER4_VREOUT(x)	((x) << 8)
+
+
+#define ILI9320_DRIVER2_SCNL(x)		((x) << 0)
+#define ILI9320_DRIVER2_NL(x)		((x) << 8)
+#define ILI9320_DRIVER2_GS		(1 << 15)
+
+
+#define ILI9320_BASEIMAGE_REV		(1 << 0)
+#define ILI9320_BASEIMAGE_VLE		(1 << 1)
+#define ILI9320_BASEIMAGE_NDL		(1 << 2)
+
+
+#define ILI9320_INTERFACE4_RTNE(x)	(x)
+#define ILI9320_INTERFACE4_DIVE(x)	((x) << 8)
+
+/* SPI interface definitions */
+
+#define ILI9320_SPI_IDCODE		(0x70)
+#define ILI9320_SPI_ID(x)		((x) << 2)
+#define ILI9320_SPI_READ		(0x01)
+#define ILI9320_SPI_WRITE		(0x00)
+#define ILI9320_SPI_DATA		(0x02)
+#define ILI9320_SPI_INDEX		(0x00)
+
+/* platform data to pass configuration from lcd */
+
+enum ili9320_suspend {
+	ILI9320_SUSPEND_OFF,
+	ILI9320_SUSPEND_DEEP,
+};
+
+struct ili9320_platdata {
+	unsigned short	hsize;
+	unsigned short	vsize;
+
+	enum ili9320_suspend suspend;
+
+	/* set the reset line, 0 = reset asserted, 1 = normal */
+	void		(*reset)(unsigned int val);
+
+	unsigned short	entry_mode;
+	unsigned short	display2;
+	unsigned short	display3;
+	unsigned short	display4;
+	unsigned short	rgb_if1;
+	unsigned short	rgb_if2;
+	unsigned short	interface2;
+	unsigned short	interface3;
+	unsigned short	interface4;
+	unsigned short	interface5;
+	unsigned short	interface6;
+};
+
-- 
cgit v1.2.3


From 0c531360ed504aa0ce995fcb8ef08e82b6534d0b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 23 Jul 2008 21:31:38 -0700
Subject: lcd: add lcd_device to check_fb() entry in lcd_ops

Add the lcd_device being checked to the check_fb entry of lcd_ops.  This
ensures that any driver using this to check against it's own state can do
so, and also makes all the calls in lcd_ops more orthogonal in their
arguments.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/lcd.c    | 2 +-
 drivers/video/bf54x-lq043fb.c    | 2 +-
 drivers/video/bfin-t350mcqb-fb.c | 2 +-
 include/linux/lcd.h              | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 299fd318dd4..b15b2b84a6f 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -33,7 +33,7 @@ static int fb_notifier_callback(struct notifier_block *self,
 	ld = container_of(self, struct lcd_device, fb_notif);
 	mutex_lock(&ld->ops_lock);
 	if (ld->ops)
-		if (!ld->ops->check_fb || ld->ops->check_fb(evdata->info))
+		if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info))
 			ld->ops->set_power(ld, *(int *)evdata->data);
 	mutex_unlock(&ld->ops_lock);
 	return 0;
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 49834a67a62..940467aed13 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -478,7 +478,7 @@ static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast)
 	return 0;
 }
 
-static int bfin_lcd_check_fb(struct fb_info *fi)
+static int bfin_lcd_check_fb(struct lcd_device *dev, struct fb_info *fi)
 {
 	if (!fi || (fi == &bfin_bf54x_fb))
 		return 1;
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index 135d6dd7e67..7d1b819e501 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -396,7 +396,7 @@ static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast)
 	return 0;
 }
 
-static int bfin_lcd_check_fb(struct fb_info *fi)
+static int bfin_lcd_check_fb(struct lcd_device *dev, struct fb_info *fi)
 {
 	if (!fi || (fi == &bfin_t350mcqb_fb))
 		return 1;
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
index 1d379787f2e..173febac665 100644
--- a/include/linux/lcd.h
+++ b/include/linux/lcd.h
@@ -47,7 +47,7 @@ struct lcd_ops {
         int (*set_contrast)(struct lcd_device *, int contrast);
 	/* Check if given framebuffer device is the one LCD is bound to;
 	   return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */
-	int (*check_fb)(struct fb_info *);
+	int (*check_fb)(struct lcd_device *, struct fb_info *);
 };
 
 struct lcd_device {
-- 
cgit v1.2.3


From c25826a7cf1c61b5c6e6db8365172eb97ef39ef3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 23 Jul 2008 21:31:38 -0700
Subject: lcd: add platform_lcd driver

Add a platform_lcd driver to allow boards with simple lcd power controls
to register themselves easily.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/Kconfig        |   7 ++
 drivers/video/backlight/Makefile       |   1 +
 drivers/video/backlight/platform_lcd.c | 172 +++++++++++++++++++++++++++++++++
 include/video/platform_lcd.h           |  21 ++++
 4 files changed, 201 insertions(+)
 create mode 100644 drivers/video/backlight/platform_lcd.c
 create mode 100644 include/video/platform_lcd.h

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index a5b3a92ffdc..b289e197e55 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -53,6 +53,13 @@ config LCD_VGG2432A4
 	  If you have a VGG2432A4 panel based on the ILI9320 controller chip
 	  then say y to include a power driver for it.
 
+config LCD_PLATFORM
+	tristate "Platform LCD controls"
+	depends on LCD_CLASS_DEVICE
+	help
+	  This driver provides a platform-device registered LCD power
+	  control interface.
+
 #
 # Backlight
 #
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 366d84e380c..7d31c14088a 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
 obj-$(CONFIG_LCD_LTV350QV)	   += ltv350qv.o
 obj-$(CONFIG_LCD_ILI9320)	   += ili9320.o
+obj-$(CONFIG_LCD_PLATFORM)	   += platform_lcd.o
 obj-$(CONFIG_LCD_VGG2432A4)	   += vgg2432a4.o
 
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
new file mode 100644
index 00000000000..72d44dbfce8
--- /dev/null
+++ b/drivers/video/backlight/platform_lcd.c
@@ -0,0 +1,172 @@
+/* drivers/video/backlight/platform_lcd.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Generic platform-device LCD power control interface.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+
+#include <video/platform_lcd.h>
+
+struct platform_lcd {
+	struct device		*us;
+	struct lcd_device	*lcd;
+	struct plat_lcd_data	*pdata;
+
+	unsigned int		 power;
+	unsigned int		 suspended : 1;
+};
+
+static inline struct platform_lcd *to_our_lcd(struct lcd_device *lcd)
+{
+	return lcd_get_data(lcd);
+}
+
+static int platform_lcd_get_power(struct lcd_device *lcd)
+{
+	struct platform_lcd *plcd = to_our_lcd(lcd);
+
+	return plcd->power;
+}
+
+static int platform_lcd_set_power(struct lcd_device *lcd, int power)
+{
+	struct platform_lcd *plcd = to_our_lcd(lcd);
+	int lcd_power = 1;
+
+	if (power == FB_BLANK_POWERDOWN || plcd->suspended)
+		lcd_power = 0;
+
+	plcd->pdata->set_power(plcd->pdata, lcd_power);
+	plcd->power = power;
+
+	return 0;
+}
+
+static int platform_lcd_match(struct lcd_device *lcd, struct fb_info *info)
+{
+	struct platform_lcd *plcd = to_our_lcd(lcd);
+	struct plat_lcd_data *pdata = plcd->pdata;
+
+	if (pdata->match_fb)
+		return pdata->match_fb(pdata, info);
+
+	return plcd->us->parent == info->device;
+}
+
+static struct lcd_ops platform_lcd_ops = {
+	.get_power	= platform_lcd_get_power,
+	.set_power	= platform_lcd_set_power,
+	.check_fb	= platform_lcd_match,
+};
+
+static int __devinit platform_lcd_probe(struct platform_device *pdev)
+{
+	struct plat_lcd_data *pdata;
+	struct platform_lcd *plcd;
+	struct device *dev = &pdev->dev;
+	int err;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(dev, "no platform data supplied\n");
+		return -EINVAL;
+	}
+
+	plcd = kzalloc(sizeof(struct platform_lcd), GFP_KERNEL);
+	if (!plcd) {
+		dev_err(dev, "no memory for state\n");
+		return -ENOMEM;
+	}
+
+	plcd->us = dev;
+	plcd->pdata = pdata;
+	plcd->lcd = lcd_device_register("platform-lcd", dev,
+					plcd, &platform_lcd_ops);
+	if (IS_ERR(plcd->lcd)) {
+		dev_err(dev, "cannot register lcd device\n");
+		err = PTR_ERR(plcd->lcd);
+		goto err_mem;
+	}
+
+	platform_set_drvdata(pdev, plcd);
+	return 0;
+
+ err_mem:
+	kfree(plcd);
+	return err;
+}
+
+static int __devexit platform_lcd_remove(struct platform_device *pdev)
+{
+	struct platform_lcd *plcd = platform_get_drvdata(pdev);
+
+	lcd_device_unregister(plcd->lcd);
+	kfree(plcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int platform_lcd_suspend(struct platform_device *pdev, pm_message_t st)
+{
+	struct platform_lcd *plcd = platform_get_drvdata(pdev);
+
+	plcd->suspended = 1;
+	platform_lcd_set_power(plcd->lcd, plcd->power);
+
+	return 0;
+}
+
+static int platform_lcd_resume(struct platform_device *pdev)
+{
+	struct platform_lcd *plcd = platform_get_drvdata(pdev);
+
+	plcd->suspended = 0;
+	platform_lcd_set_power(plcd->lcd, plcd->power);
+
+	return 0;
+}
+#else
+#define platform_lcd_suspend NULL
+#define platform_lcd_resume NULL
+#endif
+
+static struct platform_driver platform_lcd_driver = {
+	.driver		= {
+		.name	= "platform-lcd",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= platform_lcd_probe,
+	.remove		= __devexit_p(platform_lcd_remove),
+	.suspend        = platform_lcd_suspend,
+	.resume         = platform_lcd_resume,
+};
+
+static int __init platform_lcd_init(void)
+{
+	return platform_driver_register(&platform_lcd_driver);
+}
+
+static void __exit platform_lcd_cleanup(void)
+{
+	platform_driver_unregister(&platform_lcd_driver);
+}
+
+module_init(platform_lcd_init);
+module_exit(platform_lcd_cleanup);
+
+MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:platform-lcd");
diff --git a/include/video/platform_lcd.h b/include/video/platform_lcd.h
new file mode 100644
index 00000000000..ad3bdfe743b
--- /dev/null
+++ b/include/video/platform_lcd.h
@@ -0,0 +1,21 @@
+/* include/video/platform_lcd.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Generic platform-device LCD power control interface.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+struct plat_lcd_data;
+struct fb_info;
+
+struct plat_lcd_data {
+	void	(*set_power)(struct plat_lcd_data *, unsigned int power);
+	int	(*match_fb)(struct plat_lcd_data *, struct fb_info *);
+};
+
-- 
cgit v1.2.3


From 6b51d51a9d24719f905ba9657b29e04efd82a7ea Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Wed, 23 Jul 2008 21:31:39 -0700
Subject: fsl-diu-fb: update Freescale DIU driver to use page_alloc_exact()

Update the Freescale DIU driver to use page_alloc_exact() to allocate a
DMA buffer.  This also eliminates the rheap-based memory allocator.  We
can do this now because commit 6ccf61f9 allows us to allocate 8MB
physically- contiguous memory blocks.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/fsl-diu-fb.c | 60 +++++++++++++++++-----------------------------
 1 file changed, 22 insertions(+), 38 deletions(-)

diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 09d7e22c6fe..9cd36c223d3 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -279,58 +279,42 @@ static struct diu_hw dr = {
 
 static struct diu_pool pool;
 
-/*	To allocate memory for framebuffer. First try __get_free_pages(). If it
- *	fails, try rh_alloc. The reason is __get_free_pages() cannot allocate
- *	very large memory (more than 4MB). We don't want to allocate all memory
- *	in rheap since small memory allocation/deallocation will fragment the
- *	rheap and make the furture large allocation fail.
+/**
+ * fsl_diu_alloc - allocate memory for the DIU
+ * @size: number of bytes to allocate
+ * @param: returned physical address of memory
+ *
+ * This function allocates a physically-contiguous block of memory.
  */
-
-static void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
+static void *fsl_diu_alloc(size_t size, phys_addr_t *phys)
 {
 	void *virt;
 
-	pr_debug("size=%lu\n", size);
+	pr_debug("size=%zu\n", size);
 
-	virt = (void *)__get_free_pages(GFP_DMA | __GFP_ZERO, get_order(size));
+	virt = alloc_pages_exact(size, GFP_DMA | __GFP_ZERO);
 	if (virt) {
 		*phys = virt_to_phys(virt);
-		pr_debug("virt %p, phys=%llx\n", virt, (uint64_t) *phys);
-		return virt;
-	}
-	if (!diu_ops.diu_mem) {
-		printk(KERN_INFO "%s: no diu_mem."
-			" To reserve more memory, put 'diufb=15M' "
-			"in the command line\n", __func__);
-		return NULL;
-	}
-
-	virt = (void *)rh_alloc(&diu_ops.diu_rh_info, size, "DIU");
-	if (virt) {
-		*phys = virt_to_bus(virt);
-		memset(virt, 0, size);
+		pr_debug("virt=%p phys=%llx\n", virt,
+			(unsigned long long)*phys);
 	}
 
-	pr_debug("rh virt=%p phys=%llx\n", virt, (unsigned long long)*phys);
-
 	return virt;
 }
 
-static void fsl_diu_free(void *p, unsigned long size)
+/**
+ * fsl_diu_free - release DIU memory
+ * @virt: pointer returned by fsl_diu_alloc()
+ * @size: number of bytes allocated by fsl_diu_alloc()
+ *
+ * This function releases memory allocated by fsl_diu_alloc().
+ */
+static void fsl_diu_free(void *virt, size_t size)
 {
-	pr_debug("p=%p size=%lu\n", p, size);
+	pr_debug("virt=%p size=%zu\n", virt, size);
 
-	if (!p)
-		return;
-
-	if ((p >= diu_ops.diu_mem) &&
-	    (p < (diu_ops.diu_mem + diu_ops.diu_size))) {
-		pr_debug("rh\n");
-		rh_free(&diu_ops.diu_rh_info, (unsigned long) p);
-	} else {
-		pr_debug("dma\n");
-		free_pages((unsigned long)p, get_order(size));
-	}
+	if (virt && size)
+		free_pages_exact(virt, size);
 }
 
 static int fsl_diu_enable_panel(struct fb_info *info)
-- 
cgit v1.2.3


From 5abe3b4063f16245b8fafbff37bd93814eb8e363 Mon Sep 17 00:00:00 2001
From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Wed, 23 Jul 2008 21:31:40 -0700
Subject: fbdev: add new Cobalt LCD framebuffer driver

Add new Cobalt LCD framebuffer driver.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/Kconfig        |   4 +
 drivers/video/Makefile       |   1 +
 drivers/video/cobalt_lcdfb.c | 371 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 376 insertions(+)
 create mode 100644 drivers/video/cobalt_lcdfb.c

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 80fa066416b..c1b7db84341 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1987,6 +1987,10 @@ config FB_AM200EPD
          This enables support for the Metronome display controller used on
          the E-Ink AM-200 EPD devkit.
 
+config FB_COBALT
+	tristate "Cobalt server LCD frame buffer support"
+	depends on FB && MIPS_COBALT
+
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
 	depends on FB
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 4809f8b9bb2..35803259775 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -109,6 +109,7 @@ obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
 obj-$(CONFIG_FB_IMX)              += imxfb.o
 obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
 obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
+obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
 obj-$(CONFIG_FB_PNX4008_DUM)	  += pnx4008/
 obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
new file mode 100644
index 00000000000..7bad24ed04e
--- /dev/null
+++ b/drivers/video/cobalt_lcdfb.c
@@ -0,0 +1,371 @@
+/*
+ *  Cobalt server LCD frame buffer driver.
+ *
+ *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+
+/*
+ * Cursor position address
+ * \X  0    1    2  ...  14   15
+ * Y+----+----+----+---+----+----+
+ * 0|0x00|0x01|0x02|...|0x0e|0x0f|
+ *  +----+----+----+---+----+----+
+ * 1|0x40|0x41|0x42|...|0x4e|0x4f|
+ *  +----+----+----+---+----+----+
+ */
+#define LCD_DATA_REG_OFFSET	0x10
+#define LCD_XRES_MAX		16
+#define LCD_YRES_MAX		2
+#define LCD_CHARS_MAX		32
+
+#define LCD_CLEAR		0x01
+#define LCD_CURSOR_MOVE_HOME	0x02
+#define LCD_RESET		0x06
+#define LCD_OFF			0x08
+#define LCD_CURSOR_OFF		0x0c
+#define LCD_CURSOR_BLINK_OFF	0x0e
+#define LCD_CURSOR_ON		0x0f
+#define LCD_ON			LCD_CURSOR_ON
+#define LCD_CURSOR_MOVE_LEFT	0x10
+#define LCD_CURSOR_MOVE_RIGHT	0x14
+#define LCD_DISPLAY_LEFT	0x18
+#define LCD_DISPLAY_RIGHT	0x1c
+#define LCD_PRERESET		0x3f	/* execute 4 times continuously */
+#define LCD_BUSY		0x80
+
+#define LCD_GRAPHIC_MODE	0x40
+#define LCD_TEXT_MODE		0x80
+#define LCD_CUR_POS_MASK	0x7f
+
+#define LCD_CUR_POS(x)		((x) & LCD_CUR_POS_MASK)
+#define LCD_TEXT_POS(x)		((x) | LCD_TEXT_MODE)
+
+static inline void lcd_write_control(struct fb_info *info, u8 control)
+{
+	writel((u32)control << 24, info->screen_base);
+}
+
+static inline u8 lcd_read_control(struct fb_info *info)
+{
+	return readl(info->screen_base) >> 24;
+}
+
+static inline void lcd_write_data(struct fb_info *info, u8 data)
+{
+	writel((u32)data << 24, info->screen_base + LCD_DATA_REG_OFFSET);
+}
+
+static inline u8 lcd_read_data(struct fb_info *info)
+{
+	return readl(info->screen_base + LCD_DATA_REG_OFFSET) >> 24;
+}
+
+static int lcd_busy_wait(struct fb_info *info)
+{
+	u8 val = 0;
+	int timeout = 10, retval = 0;
+
+	do {
+		val = lcd_read_control(info);
+		val &= LCD_BUSY;
+		if (val != LCD_BUSY)
+			break;
+
+		if (msleep_interruptible(1))
+			return -EINTR;
+
+		timeout--;
+	} while (timeout);
+
+	if (val == LCD_BUSY)
+		retval = -EBUSY;
+
+	return retval;
+}
+
+static void lcd_clear(struct fb_info *info)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		udelay(150);
+
+		lcd_write_control(info, LCD_PRERESET);
+	}
+
+	udelay(150);
+
+	lcd_write_control(info, LCD_CLEAR);
+
+	udelay(150);
+
+	lcd_write_control(info, LCD_RESET);
+}
+
+static struct fb_fix_screeninfo cobalt_lcdfb_fix __initdata = {
+	.id		= "cobalt-lcd",
+	.type		= FB_TYPE_TEXT,
+	.type_aux	= FB_AUX_TEXT_MDA,
+	.visual		= FB_VISUAL_MONO01,
+	.line_length	= LCD_XRES_MAX,
+	.accel		= FB_ACCEL_NONE,
+};
+
+static ssize_t cobalt_lcdfb_read(struct fb_info *info, char __user *buf,
+				 size_t count, loff_t *ppos)
+{
+	char src[LCD_CHARS_MAX];
+	unsigned long pos;
+	int len, retval = 0;
+
+	pos = *ppos;
+	if (pos >= LCD_CHARS_MAX || count == 0)
+		return 0;
+
+	if (count > LCD_CHARS_MAX)
+		count = LCD_CHARS_MAX;
+
+	if (pos + count > LCD_CHARS_MAX)
+		count = LCD_CHARS_MAX - pos;
+
+	for (len = 0; len < count; len++) {
+		retval = lcd_busy_wait(info);
+		if (retval < 0)
+			break;
+
+		lcd_write_control(info, LCD_TEXT_POS(pos));
+
+		retval = lcd_busy_wait(info);
+		if (retval < 0)
+			break;
+
+		src[len] = lcd_read_data(info);
+		if (pos == 0x0f)
+			pos = 0x40;
+		else
+			pos++;
+	}
+
+	if (retval < 0 && signal_pending(current))
+		return -ERESTARTSYS;
+
+	if (copy_to_user(buf, src, len))
+		return -EFAULT;
+
+	*ppos += len;
+
+	return len;
+}
+
+static ssize_t cobalt_lcdfb_write(struct fb_info *info, const char __user *buf,
+				  size_t count, loff_t *ppos)
+{
+	char dst[LCD_CHARS_MAX];
+	unsigned long pos;
+	int len, retval = 0;
+
+	pos = *ppos;
+	if (pos >= LCD_CHARS_MAX || count == 0)
+		return 0;
+
+	if (count > LCD_CHARS_MAX)
+		count = LCD_CHARS_MAX;
+
+	if (pos + count > LCD_CHARS_MAX)
+		count = LCD_CHARS_MAX - pos;
+
+	if (copy_from_user(dst, buf, count))
+		return -EFAULT;
+
+	for (len = 0; len < count; len++) {
+		retval = lcd_busy_wait(info);
+		if (retval < 0)
+			break;
+
+		lcd_write_control(info, LCD_TEXT_POS(pos));
+
+		retval = lcd_busy_wait(info);
+		if (retval < 0)
+			break;
+
+		lcd_write_data(info, dst[len]);
+		if (pos == 0x0f)
+			pos = 0x40;
+		else
+			pos++;
+	}
+
+	if (retval < 0 && signal_pending(current))
+		return -ERESTARTSYS;
+
+	*ppos += len;
+
+	return len;
+}
+
+static int cobalt_lcdfb_blank(int blank_mode, struct fb_info *info)
+{
+	int retval;
+
+	retval = lcd_busy_wait(info);
+	if (retval < 0)
+		return retval;
+
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+		lcd_write_control(info, LCD_ON);
+		break;
+	default:
+		lcd_write_control(info, LCD_OFF);
+		break;
+	}
+
+	return 0;
+}
+
+static int cobalt_lcdfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	u32 x, y;
+	int retval;
+
+	switch (cursor->set) {
+	case FB_CUR_SETPOS:
+		x = cursor->image.dx;
+		y = cursor->image.dy;
+		if (x >= LCD_XRES_MAX || y >= LCD_YRES_MAX)
+			return -EINVAL;
+
+		retval = lcd_busy_wait(info);
+		if (retval < 0)
+			return retval;
+
+		lcd_write_control(info,
+				  LCD_TEXT_POS(info->fix.line_length * y + x));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	retval = lcd_busy_wait(info);
+	if (retval < 0)
+		return retval;
+
+	if (cursor->enable)
+		lcd_write_control(info, LCD_CURSOR_ON);
+	else
+		lcd_write_control(info, LCD_CURSOR_OFF);
+
+	return 0;
+}
+
+static struct fb_ops cobalt_lcd_fbops = {
+	.owner		= THIS_MODULE,
+	.fb_read	= cobalt_lcdfb_read,
+	.fb_write	= cobalt_lcdfb_write,
+	.fb_blank	= cobalt_lcdfb_blank,
+	.fb_cursor	= cobalt_lcdfb_cursor,
+};
+
+static int __init cobalt_lcdfb_probe(struct platform_device *dev)
+{
+	struct fb_info *info;
+	struct resource *res;
+	int retval;
+
+	info = framebuffer_alloc(0, &dev->dev);
+	if (!info)
+		return -ENOMEM;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		framebuffer_release(info);
+		return -EBUSY;
+	}
+
+	info->screen_size = res->end - res->start + 1;
+	info->screen_base = ioremap(res->start, info->screen_size);
+	info->fbops = &cobalt_lcd_fbops;
+	info->fix = cobalt_lcdfb_fix;
+	info->fix.smem_start = res->start;
+	info->fix.smem_len = info->screen_size;
+	info->pseudo_palette = NULL;
+	info->par = NULL;
+	info->flags = FBINFO_DEFAULT;
+
+	retval = register_framebuffer(info);
+	if (retval < 0) {
+		iounmap(info->screen_base);
+		framebuffer_release(info);
+		return retval;
+	}
+
+	platform_set_drvdata(dev, info);
+
+	lcd_clear(info);
+
+	printk(KERN_INFO "fb%d: Cobalt server LCD frame buffer device\n",
+		info->node);
+
+	return 0;
+}
+
+static int __devexit cobalt_lcdfb_remove(struct platform_device *dev)
+{
+	struct fb_info *info;
+
+	info = platform_get_drvdata(dev);
+	if (info) {
+		iounmap(info->screen_base);
+		unregister_framebuffer(info);
+		framebuffer_release(info);
+	}
+
+	return 0;
+}
+
+static struct platform_driver cobalt_lcdfb_driver = {
+	.probe	= cobalt_lcdfb_probe,
+	.remove	= __devexit_p(cobalt_lcdfb_remove),
+	.driver	= {
+		.name	= "cobalt-lcd",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init cobalt_lcdfb_init(void)
+{
+	return platform_driver_register(&cobalt_lcdfb_driver);
+}
+
+static void __exit cobalt_lcdfb_exit(void)
+{
+	platform_driver_unregister(&cobalt_lcdfb_driver);
+}
+
+module_init(cobalt_lcdfb_init);
+module_exit(cobalt_lcdfb_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Yoichi Yuasa");
+MODULE_DESCRIPTION("Cobalt server LCD frame buffer driver");
-- 
cgit v1.2.3


From 18b095d4b847bb08bf8a1bace7711a93d27732c0 Mon Sep 17 00:00:00 2001
From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Wed, 23 Jul 2008 21:31:41 -0700
Subject: drivers/char: remove old broken Cobalt LCD driver

Remove old broken Cobalt LCD driver.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/Kconfig  |   7 -
 drivers/char/Makefile |   1 -
 drivers/char/lcd.c    | 516 --------------------------------------------------
 drivers/char/lcd.h    | 154 ---------------
 4 files changed, 678 deletions(-)
 delete mode 100644 drivers/char/lcd.c
 delete mode 100644 drivers/char/lcd.h

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index e0bbbfb6a36..67b07576f8b 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -857,13 +857,6 @@ config DS1302
 
 endif # RTC_LIB
 
-config COBALT_LCD
-	bool "Support for Cobalt LCD"
-	depends on MIPS_COBALT
-	help
-	  This option enables support for the LCD display and buttons found
-	  on Cobalt systems through a misc device.
-
 config DTLK
 	tristate "Double Talk PC internal speech card support"
 	depends on ISA
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index dc5a327d72d..4b6e736cfa0 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -88,7 +88,6 @@ obj-$(CONFIG_TOSHIBA)		+= toshiba.o
 obj-$(CONFIG_I8K)		+= i8k.o
 obj-$(CONFIG_DS1620)		+= ds1620.o
 obj-$(CONFIG_HW_RANDOM)		+= hw_random/
-obj-$(CONFIG_COBALT_LCD)	+= lcd.o
 obj-$(CONFIG_PPDEV)		+= ppdev.o
 obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
 obj-$(CONFIG_NWFLASH)		+= nwflash.o
diff --git a/drivers/char/lcd.c b/drivers/char/lcd.c
deleted file mode 100644
index 1c29b20e4f4..00000000000
--- a/drivers/char/lcd.c
+++ /dev/null
@@ -1,516 +0,0 @@
-/*
- * LCD, LED and Button interface for Cobalt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996, 1997 by Andrew Bose
- *
- * Linux kernel version history:
- *       March 2001: Ported from 2.0.34  by Liam Davies
- *
- */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/mc146818rtc.h>
-#include <linux/netdevice.h>
-#include <linux/sched.h>
-#include <linux/smp_lock.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-
-#include "lcd.h"
-
-static int lcd_ioctl(struct inode *inode, struct file *file,
-		     unsigned int cmd, unsigned long arg);
-
-static unsigned int lcd_present = 1;
-
-/* used in arch/mips/cobalt/reset.c */
-int led_state = 0;
-
-#if defined(CONFIG_TULIP) && 0
-
-#define MAX_INTERFACES	8
-static linkcheck_func_t linkcheck_callbacks[MAX_INTERFACES];
-static void *linkcheck_cookies[MAX_INTERFACES];
-
-int lcd_register_linkcheck_func(int iface_num, void *func, void *cookie)
-{
-	if (iface_num < 0 ||
-	    iface_num >= MAX_INTERFACES ||
-	    linkcheck_callbacks[iface_num] != NULL)
-		return -1;
-	linkcheck_callbacks[iface_num] = (linkcheck_func_t) func;
-	linkcheck_cookies[iface_num] = cookie;
-	return 0;
-}
-#endif
-
-static int lcd_ioctl(struct inode *inode, struct file *file,
-		     unsigned int cmd, unsigned long arg)
-{
-	struct lcd_display button_display;
-	unsigned long address, a;
-
-	switch (cmd) {
-	case LCD_On:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x0F);
-		break;
-
-	case LCD_Off:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x08);
-		break;
-
-	case LCD_Reset:
-		udelay(150);
-		LCDWriteInst(0x3F);
-		udelay(150);
-		LCDWriteInst(0x3F);
-		udelay(150);
-		LCDWriteInst(0x3F);
-		udelay(150);
-		LCDWriteInst(0x3F);
-		udelay(150);
-		LCDWriteInst(0x01);
-		udelay(150);
-		LCDWriteInst(0x06);
-		break;
-
-	case LCD_Clear:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x01);
-		break;
-
-	case LCD_Cursor_Left:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x10);
-		break;
-
-	case LCD_Cursor_Right:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x14);
-		break;
-
-	case LCD_Cursor_Off:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x0C);
-		break;
-
-	case LCD_Cursor_On:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x0F);
-		break;
-
-	case LCD_Blink_Off:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x0E);
-		break;
-
-	case LCD_Get_Cursor_Pos:{
-			struct lcd_display display;
-
-			udelay(150);
-			BusyCheck();
-			display.cursor_address = (LCDReadInst);
-			display.cursor_address =
-			    (display.cursor_address & 0x07F);
-			if (copy_to_user
-			    ((struct lcd_display *) arg, &display,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-
-			break;
-		}
-
-
-	case LCD_Set_Cursor_Pos:{
-			struct lcd_display display;
-
-			if (copy_from_user
-			    (&display, (struct lcd_display *) arg,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-
-			a = (display.cursor_address | kLCD_Addr);
-
-			udelay(150);
-			BusyCheck();
-			LCDWriteInst(a);
-
-			break;
-		}
-
-	case LCD_Get_Cursor:{
-			struct lcd_display display;
-
-			udelay(150);
-			BusyCheck();
-			display.character = LCDReadData;
-
-			if (copy_to_user
-			    ((struct lcd_display *) arg, &display,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-			udelay(150);
-			BusyCheck();
-			LCDWriteInst(0x10);
-
-			break;
-		}
-
-	case LCD_Set_Cursor:{
-			struct lcd_display display;
-
-			if (copy_from_user
-			    (&display, (struct lcd_display *) arg,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-
-			udelay(150);
-			BusyCheck();
-			LCDWriteData(display.character);
-			udelay(150);
-			BusyCheck();
-			LCDWriteInst(0x10);
-
-			break;
-		}
-
-
-	case LCD_Disp_Left:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x18);
-		break;
-
-	case LCD_Disp_Right:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x1C);
-		break;
-
-	case LCD_Home:
-		udelay(150);
-		BusyCheck();
-		LCDWriteInst(0x02);
-		break;
-
-	case LCD_Write:{
-			struct lcd_display display;
-			unsigned int index;
-
-
-			if (copy_from_user
-			    (&display, (struct lcd_display *) arg,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-
-			udelay(150);
-			BusyCheck();
-			LCDWriteInst(0x80);
-			udelay(150);
-			BusyCheck();
-
-			for (index = 0; index < (display.size1); index++) {
-				udelay(150);
-				BusyCheck();
-				LCDWriteData(display.line1[index]);
-				BusyCheck();
-			}
-
-			udelay(150);
-			BusyCheck();
-			LCDWriteInst(0xC0);
-			udelay(150);
-			BusyCheck();
-			for (index = 0; index < (display.size2); index++) {
-				udelay(150);
-				BusyCheck();
-				LCDWriteData(display.line2[index]);
-			}
-
-			break;
-		}
-
-	case LCD_Read:{
-			struct lcd_display display;
-
-			BusyCheck();
-			for (address = kDD_R00; address <= kDD_R01;
-			     address++) {
-				a = (address | kLCD_Addr);
-
-				udelay(150);
-				BusyCheck();
-				LCDWriteInst(a);
-				udelay(150);
-				BusyCheck();
-				display.line1[address] = LCDReadData;
-			}
-
-			display.line1[0x27] = '\0';
-
-			for (address = kDD_R10; address <= kDD_R11;
-			     address++) {
-				a = (address | kLCD_Addr);
-
-				udelay(150);
-				BusyCheck();
-				LCDWriteInst(a);
-
-				udelay(150);
-				BusyCheck();
-				display.line2[address - 0x40] =
-				    LCDReadData;
-			}
-
-			display.line2[0x27] = '\0';
-
-			if (copy_to_user
-			    ((struct lcd_display *) arg, &display,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-			break;
-		}
-
-//  set all GPIO leds to led_display.leds
-
-	case LED_Set:{
-			struct lcd_display led_display;
-
-
-			if (copy_from_user
-			    (&led_display, (struct lcd_display *) arg,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-
-			led_state = led_display.leds;
-			LEDSet(led_state);
-
-			break;
-		}
-
-
-//  set only bit led_display.leds
-
-	case LED_Bit_Set:{
-			unsigned int i;
-			int bit = 1;
-			struct lcd_display led_display;
-
-
-			if (copy_from_user
-			    (&led_display, (struct lcd_display *) arg,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-
-			for (i = 0; i < (int) led_display.leds; i++) {
-				bit = 2 * bit;
-			}
-
-			led_state = led_state | bit;
-			LEDSet(led_state);
-			break;
-		}
-
-//  clear only bit led_display.leds
-
-	case LED_Bit_Clear:{
-			unsigned int i;
-			int bit = 1;
-			struct lcd_display led_display;
-
-
-			if (copy_from_user
-			    (&led_display, (struct lcd_display *) arg,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-
-			for (i = 0; i < (int) led_display.leds; i++) {
-				bit = 2 * bit;
-			}
-
-			led_state = led_state & ~bit;
-			LEDSet(led_state);
-			break;
-		}
-
-
-	case BUTTON_Read:{
-			button_display.buttons = GPIRead;
-			if (copy_to_user
-			    ((struct lcd_display *) arg, &button_display,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-			break;
-		}
-
-	case LINK_Check:{
-			button_display.buttons =
-			    *((volatile unsigned long *) (0xB0100060));
-			if (copy_to_user
-			    ((struct lcd_display *) arg, &button_display,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-			break;
-		}
-
-	case LINK_Check_2:{
-			int iface_num;
-
-			/* panel-utils should pass in the desired interface status is wanted for
-			 * in "buttons" of the structure.  We will set this to non-zero if the
-			 * link is in fact up for the requested interface.  --DaveM
-			 */
-			if (copy_from_user
-			    (&button_display, (struct lcd_display *) arg,
-			     sizeof(button_display)))
-				return -EFAULT;
-			iface_num = button_display.buttons;
-#if defined(CONFIG_TULIP) && 0
-			if (iface_num >= 0 &&
-			    iface_num < MAX_INTERFACES &&
-			    linkcheck_callbacks[iface_num] != NULL) {
-				button_display.buttons =
-				    linkcheck_callbacks[iface_num]
-				    (linkcheck_cookies[iface_num]);
-			} else
-#endif
-				button_display.buttons = 0;
-
-			if (__copy_to_user
-			    ((struct lcd_display *) arg, &button_display,
-			     sizeof(struct lcd_display)))
-				return -EFAULT;
-			break;
-		}
-
-	default:
-		return -EINVAL;
-
-	}
-
-	return 0;
-
-}
-
-static int lcd_open(struct inode *inode, struct file *file)
-{
-	cycle_kernel_lock();
-
-	if (!lcd_present)
-		return -ENXIO;
-	else
-		return 0;
-}
-
-/* Only RESET or NEXT counts as button pressed */
-
-static inline int button_pressed(void)
-{
-	unsigned long buttons = GPIRead;
-
-	if ((buttons == BUTTON_Next) || (buttons == BUTTON_Next_B)
-	    || (buttons == BUTTON_Reset_B))
-		return buttons;
-	return 0;
-}
-
-/* LED daemon sits on this and we wake him up once a key is pressed. */
-
-static int lcd_waiters = 0;
-
-static ssize_t lcd_read(struct file *file, char *buf,
-		     size_t count, loff_t *ofs)
-{
-	long buttons_now;
-
-	if (lcd_waiters > 0)
-		return -EINVAL;
-
-	lcd_waiters++;
-	while (((buttons_now = (long) button_pressed()) == 0) &&
-	       !(signal_pending(current))) {
-		msleep_interruptible(2000);
-	}
-	lcd_waiters--;
-
-	if (signal_pending(current))
-		return -ERESTARTSYS;
-	return buttons_now;
-}
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations lcd_fops = {
-	.read = lcd_read,
-	.ioctl = lcd_ioctl,
-	.open = lcd_open,
-};
-
-static struct miscdevice lcd_dev = {
-	MISC_DYNAMIC_MINOR,
-	"lcd",
-	&lcd_fops
-};
-
-static int lcd_init(void)
-{
-	int ret;
-	unsigned long data;
-
-	pr_info("%s\n", LCD_DRIVER);
-	ret = misc_register(&lcd_dev);
-	if (ret) {
-		printk(KERN_WARNING LCD "Unable to register misc device.\n");
-		return ret;
-	}
-
-	/* Check region? Naaah! Just snarf it up. */
-/*	request_region(RTC_PORT(0), RTC_IO_EXTENT, "lcd");*/
-
-	udelay(150);
-	data = LCDReadData;
-	if ((data & 0x000000FF) == (0x00)) {
-		lcd_present = 0;
-		pr_info(LCD "LCD Not Present\n");
-	} else {
-		lcd_present = 1;
-		WRITE_GAL(kGal_DevBank2PReg, kGal_DevBank2Cfg);
-		WRITE_GAL(kGal_DevBank3PReg, kGal_DevBank3Cfg);
-	}
-
-	return 0;
-}
-
-static void __exit lcd_exit(void)
-{
-	misc_deregister(&lcd_dev);
-}
-
-module_init(lcd_init);
-module_exit(lcd_exit);
-
-MODULE_AUTHOR("Andrew Bose");
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/lcd.h b/drivers/char/lcd.h
deleted file mode 100644
index 290b3ff23b0..00000000000
--- a/drivers/char/lcd.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * LED, LCD and Button panel driver for Cobalt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996, 1997 by Andrew Bose
- *
- * Linux kernel version history:
- *       March 2001: Ported from 2.0.34  by Liam Davies
- *
- */
-
-// function headers
-
-#define LCD_CHARS_PER_LINE 40
-#define MAX_IDLE_TIME 120
-
-struct lcd_display {
-        unsigned buttons;
-        int size1;
-        int size2;
-        unsigned char line1[LCD_CHARS_PER_LINE];
-        unsigned char line2[LCD_CHARS_PER_LINE];
-        unsigned char cursor_address;
-        unsigned char character;
-        unsigned char leds;
-        unsigned char *RomImage;
-};
-
-
-
-#define LCD_DRIVER	"Cobalt LCD Driver v2.10"
-
-#define LCD		"lcd: "
-
-#define kLCD_IR		0x0F000000
-#define kLCD_DR		0x0F000010
-#define kGPI		0x0D000000
-#define kLED		0x0C000000
-
-#define kDD_R00         0x00
-#define kDD_R01         0x27
-#define kDD_R10         0x40
-#define kDD_R11         0x67
-
-#define kLCD_Addr       0x00000080
-
-#define LCDTimeoutValue	0xfff
-
-
-// Macros
-
-#define LCDWriteData(x)	outl((x << 24), kLCD_DR)
-#define LCDWriteInst(x)	outl((x << 24), kLCD_IR)
-
-#define LCDReadData	(inl(kLCD_DR) >> 24)
-#define LCDReadInst	(inl(kLCD_IR) >> 24)
-
-#define GPIRead		(inl(kGPI) >> 24)
-
-#define LEDSet(x)	outb((char)x, kLED)
-
-#define WRITE_GAL(x,y)	outl(y, 0x04000000 | (x))
-#define BusyCheck()	while ((LCDReadInst & 0x80) == 0x80)
-
-
-
-/*
- * Function command codes for io_ctl.
- */
-#define LCD_On			1
-#define LCD_Off			2
-#define LCD_Clear		3
-#define LCD_Reset		4
-#define LCD_Cursor_Left		5
-#define LCD_Cursor_Right	6
-#define LCD_Disp_Left		7
-#define LCD_Disp_Right		8
-#define LCD_Get_Cursor		9
-#define LCD_Set_Cursor		10
-#define LCD_Home		11
-#define LCD_Read		12
-#define LCD_Write		13
-#define LCD_Cursor_Off		14
-#define LCD_Cursor_On		15
-#define LCD_Get_Cursor_Pos	16
-#define LCD_Set_Cursor_Pos	17
-#define LCD_Blink_Off           18
-
-#define LED_Set			40
-#define LED_Bit_Set		41
-#define LED_Bit_Clear		42
-
-
-//  Button defs
-#define BUTTON_Read             50
-
-
-// Ethernet LINK check hackaroo
-#define LINK_Check              90
-#define LINK_Check_2		91
-
-//  Button patterns  _B - single layer lcd boards
-
-#define BUTTON_NONE               0x3F
-#define BUTTON_NONE_B             0xFE
-
-#define BUTTON_Left               0x3B
-#define BUTTON_Left_B             0xFA
-
-#define BUTTON_Right              0x37
-#define BUTTON_Right_B            0xDE
-
-#define BUTTON_Up                 0x2F
-#define BUTTON_Up_B               0xF6
-
-#define BUTTON_Down               0x1F
-#define BUTTON_Down_B             0xEE
-
-#define BUTTON_Next               0x3D
-#define BUTTON_Next_B             0x7E
-
-#define BUTTON_Enter              0x3E
-#define BUTTON_Enter_B            0xBE
-
-#define BUTTON_Reset_B            0xFC
-
-
-// debounce constants
-
-#define BUTTON_SENSE            160000
-#define BUTTON_DEBOUNCE		5000
-
-
-//  Galileo register stuff
-
-#define kGal_DevBank2Cfg        0x1466DB33
-#define kGal_DevBank2PReg       0x464
-#define kGal_DevBank3Cfg        0x146FDFFB
-#define kGal_DevBank3PReg       0x468
-
-// Network
-
-#define kIPADDR			1
-#define kNETMASK		2
-#define kGATEWAY		3
-#define kDNS			4
-
-#define kClassA			5
-#define kClassB			6
-#define kClassC			7
-
-- 
cgit v1.2.3


From be935d5b6301865b4e9ec35d79d398cedb3c82b7 Mon Sep 17 00:00:00 2001
From: Andres Salomon <dilinger@queued.net>
Date: Wed, 23 Jul 2008 21:31:41 -0700
Subject: lxfb: drop dead declarations from header

We never sent the gamma stuff upstream, and don't really care about it.
However, lx_[gs]_et_gamma prototypes snuck into lxfb.h anyways; there are
no definitions for them.  Drop the dead code.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/geode/lxfb.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index 3b9416f4ee2..6a51448fd3f 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -51,8 +51,6 @@ static inline unsigned int lx_get_pitch(unsigned int xres, int bpp)
 }
 
 void lx_set_mode(struct fb_info *);
-void lx_get_gamma(struct fb_info *, unsigned int *, int);
-void lx_set_gamma(struct fb_info *, unsigned int *, int);
 unsigned int lx_framebuffer_size(void);
 int lx_blank_display(struct fb_info *, int);
 void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
-- 
cgit v1.2.3


From 104b198dd0b3b62a4fc4e9146f01f2abc718e926 Mon Sep 17 00:00:00 2001
From: Jordan Crouse <jordan.crouse@amd.com>
Date: Wed, 23 Jul 2008 21:31:43 -0700
Subject: lxfb: fix console blanking

Simply enabling DAC blanking without turning off the CRT seems to be resulting
in characters remaining on the screen when the monitor blanks.  This patch
turns off the CRT for all modes, and also powers down the DACs when vsync
and/or hsync are disabled.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/geode/lxfb_ops.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index aaef9165ec9..b1cd49c9935 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -517,25 +517,25 @@ void lx_set_palette_reg(struct fb_info *info, unsigned regno,
 int lx_blank_display(struct fb_info *info, int blank_mode)
 {
 	struct lxfb_par *par = info->par;
-	u32 dcfg, fp_pm;
-	int blank, hsync, vsync, crt;
+	u32 dcfg, misc, fp_pm;
+	int blank, hsync, vsync;
 
 	/* CRT power saving modes. */
 	switch (blank_mode) {
 	case FB_BLANK_UNBLANK:
-		blank = 0; hsync = 1; vsync = 1; crt = 1;
+		blank = 0; hsync = 1; vsync = 1;
 		break;
 	case FB_BLANK_NORMAL:
-		blank = 1; hsync = 1; vsync = 1; crt = 1;
+		blank = 1; hsync = 1; vsync = 1;
 		break;
 	case FB_BLANK_VSYNC_SUSPEND:
-		blank = 1; hsync = 1; vsync = 0; crt = 1;
+		blank = 1; hsync = 1; vsync = 0;
 		break;
 	case FB_BLANK_HSYNC_SUSPEND:
-		blank = 1; hsync = 0; vsync = 1; crt = 1;
+		blank = 1; hsync = 0; vsync = 1;
 		break;
 	case FB_BLANK_POWERDOWN:
-		blank = 1; hsync = 0; vsync = 0; crt = 0;
+		blank = 1; hsync = 0; vsync = 0;
 		break;
 	default:
 		return -EINVAL;
@@ -545,15 +545,23 @@ int lx_blank_display(struct fb_info *info, int blank_mode)
 	dcfg &= ~(VP_DCFG_DAC_BL_EN | VP_DCFG_HSYNC_EN | VP_DCFG_VSYNC_EN |
 			VP_DCFG_CRT_EN);
 	if (!blank)
-		dcfg |= VP_DCFG_DAC_BL_EN;
+		dcfg |= VP_DCFG_DAC_BL_EN | VP_DCFG_CRT_EN;
 	if (hsync)
 		dcfg |= VP_DCFG_HSYNC_EN;
 	if (vsync)
 		dcfg |= VP_DCFG_VSYNC_EN;
-	if (crt)
-		dcfg |= VP_DCFG_CRT_EN;
+
 	write_vp(par, VP_DCFG, dcfg);
 
+	misc = read_vp(par, VP_MISC);
+
+	if (vsync && hsync)
+		misc &= ~VP_MISC_DACPWRDN;
+	else
+		misc |= VP_MISC_DACPWRDN;
+
+	write_vp(par, VP_MISC, misc);
+
 	/* Power on/off flat panel */
 
 	if (par->output & OUTPUT_PANEL) {
-- 
cgit v1.2.3


From 5798712d608f5ebad994487748a2ccf3cc613d78 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 23 Jul 2008 21:31:43 -0700
Subject: drivers/video/amifb.c cleanups

This patch contains the following cleanups:
- make the needlessly global amifb_init() static
- rename cleanup_module() to amifb_exit(),
  make it static __exit,
  use module_exit(),
  there's no need to #ifdef MODULE it

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/amifb.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index 0c549aa1cf8..b8e9a8682f2 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -1136,7 +1136,6 @@ static int amifb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg
 	 * Interface to the low level console driver
 	 */
 
-int amifb_init(void);
 static void amifb_deinit(void);
 
 	/*
@@ -2248,7 +2247,7 @@ static inline void chipfree(void)
 	 * Initialisation
 	 */
 
-int __init amifb_init(void)
+static int __init amifb_init(void)
 {
 	int tag, i, err = 0;
 	u_long chipptr;
@@ -3793,16 +3792,14 @@ static void ami_rebuild_copper(void)
 	}
 }
 
-
-module_init(amifb_init);
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-
-void cleanup_module(void)
+static void __exit amifb_exit(void)
 {
 	unregister_framebuffer(&fb_info);
 	amifb_deinit();
 	amifb_video_off();
 }
-#endif /* MODULE */
+
+module_init(amifb_init);
+module_exit(amifb_exit);
+
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 7fc80b7bd682b47825e806018cca8ff7dc6bb55a Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:44 -0700
Subject: neofb: simplify clock calculation

There is nothing to gain by converting value in kHz to fixed point MHz.
Just calculate everything in kHz.

A reorder of the loop allows reducing number of iterations (check if
frequency is not too high already).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/neofb.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
index 5246b0402d7..b033e5a4dc8 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -201,7 +201,6 @@ static int neoFindMode(int xres, int yres, int depth)
  *
  * Determine the closest clock frequency to the one requested.
  */
-#define REF_FREQ 0xe517		/* 14.31818 in 20.12 fixed point */
 #define MAX_N 127
 #define MAX_D 31
 #define MAX_F 1
@@ -211,27 +210,24 @@ static void neoCalcVCLK(const struct fb_info *info,
 {
 	int n, d, f;
 	int n_best = 0, d_best = 0, f_best = 0;
-	long f_best_diff = (0x7ffff << 12);	/* 20.12 */
-	long f_target = (freq << 12) / 1000;	/* 20.12 */
+	long f_best_diff = 0x7ffff;
 
 	for (f = 0; f <= MAX_F; f++)
-		for (n = 0; n <= MAX_N; n++)
-			for (d = 0; d <= MAX_D; d++) {
-				long f_out;	/* 20.12 */
-				long f_diff;	/* 20.12 */
-
-				f_out =
-				    ((((n + 1) << 12) / ((d +
-							  1) *
-							 (1 << f))) >> 12)
-				    * REF_FREQ;
-				f_diff = abs(f_out - f_target);
-				if (f_diff < f_best_diff) {
+		for (d = 0; d <= MAX_D; d++)
+			for (n = 0; n <= MAX_N; n++) {
+				long f_out;
+				long f_diff;
+
+				f_out = ((14318 * (n + 1)) / (d + 1)) >> f;
+				f_diff = abs(f_out - freq);
+				if (f_diff <= f_best_diff) {
 					f_best_diff = f_diff;
 					n_best = n;
 					d_best = d;
 					f_best = f;
 				}
+				if (f_out > freq)
+					break;
 			}
 
 	if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 ||
@@ -248,11 +244,11 @@ static void neoCalcVCLK(const struct fb_info *info,
 	par->VCLK3Denominator = d_best;
 
 #ifdef NEOFB_DEBUG
-	printk("neoVCLK: f:%d NumLow=%d NumHi=%d Den=%d Df=%d\n",
-	       f_target >> 12,
+	printk(KERN_DEBUG "neoVCLK: f:%ld NumLow=%d NumHi=%d Den=%d Df=%ld\n",
+	       freq,
 	       par->VCLK3NumeratorLow,
 	       par->VCLK3NumeratorHigh,
-	       par->VCLK3Denominator, f_best_diff >> 12);
+	       par->VCLK3Denominator, f_best_diff);
 #endif
 }
 
-- 
cgit v1.2.3


From 1ca6b62f8ca668ccfab0da9112c0125ef82343bd Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:45 -0700
Subject: neofb: drop redundant code

Drop structure which is only set but never read.  Drop variables which are
only set and never read.  Convert one long switch into two shorter ones.

Add cpu_relax() in busy waiting loop.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/neofb.c | 95 ++++++++++++---------------------------------------
 1 file changed, 22 insertions(+), 73 deletions(-)

diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
index b033e5a4dc8..669b8c196bb 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -479,7 +479,8 @@ static inline int neo2200_sync(struct fb_info *info)
 {
 	struct neofb_par *par = info->par;
 
-	while (readl(&par->neo2200->bltStat) & 1);
+	while (readl(&par->neo2200->bltStat) & 1)
+		cpu_relax();
 	return 0;
 }
 
@@ -587,34 +588,14 @@ static int
 neofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	struct neofb_par *par = info->par;
-	unsigned int pixclock = var->pixclock;
-	struct xtimings timings;
 	int memlen, vramlen;
 	int mode_ok = 0;
 
 	DBG("neofb_check_var");
 
-	if (!pixclock)
-		pixclock = 10000;	/* 10ns = 100MHz */
-	timings.pixclock = 1000000000 / pixclock;
-	if (timings.pixclock < 1)
-		timings.pixclock = 1;
-
-	if (timings.pixclock > par->maxClock)
+	if (PICOS2KHZ(var->pixclock) > par->maxClock)
 		return -EINVAL;
 
-	timings.dblscan = var->vmode & FB_VMODE_DOUBLE;
-	timings.interlaced = var->vmode & FB_VMODE_INTERLACED;
-	timings.HDisplay = var->xres;
-	timings.HSyncStart = timings.HDisplay + var->right_margin;
-	timings.HSyncEnd = timings.HSyncStart + var->hsync_len;
-	timings.HTotal = timings.HSyncEnd + var->left_margin;
-	timings.VDisplay = var->yres;
-	timings.VSyncStart = timings.VDisplay + var->lower_margin;
-	timings.VSyncEnd = timings.VSyncStart + var->vsync_len;
-	timings.VTotal = timings.VSyncEnd + var->upper_margin;
-	timings.sync = var->sync;
-
 	/* Is the mode larger than the LCD panel? */
 	if (par->internal_display &&
             ((var->xres > par->NeoPanelWidth) ||
@@ -1923,9 +1904,6 @@ static int __devinit neo_init_hw(struct fb_info *info)
 	int maxClock = 65000;
 	int CursorMem = 1024;
 	int CursorOff = 0x100;
-	int linearSize = 1024;
-	int maxWidth = 1024;
-	int maxHeight = 1024;
 
 	DBG("neo_init_hw");
 
@@ -1944,81 +1922,52 @@ static int __devinit neo_init_hw(struct fb_info *info)
 	case FB_ACCEL_NEOMAGIC_NM2070:
 		videoRam = 896;
 		maxClock = 65000;
-		CursorMem = 2048;
-		CursorOff = 0x100;
-		linearSize = 1024;
-		maxWidth = 1024;
-		maxHeight = 1024;
 		break;
 	case FB_ACCEL_NEOMAGIC_NM2090:
 	case FB_ACCEL_NEOMAGIC_NM2093:
-		videoRam = 1152;
-		maxClock = 80000;
-		CursorMem = 2048;
-		CursorOff = 0x100;
-		linearSize = 2048;
-		maxWidth = 1024;
-		maxHeight = 1024;
-		break;
 	case FB_ACCEL_NEOMAGIC_NM2097:
 		videoRam = 1152;
 		maxClock = 80000;
-		CursorMem = 1024;
-		CursorOff = 0x100;
-		linearSize = 2048;
-		maxWidth = 1024;
-		maxHeight = 1024;
 		break;
 	case FB_ACCEL_NEOMAGIC_NM2160:
 		videoRam = 2048;
 		maxClock = 90000;
-		CursorMem = 1024;
-		CursorOff = 0x100;
-		linearSize = 2048;
-		maxWidth = 1024;
-		maxHeight = 1024;
 		break;
 	case FB_ACCEL_NEOMAGIC_NM2200:
 		videoRam = 2560;
 		maxClock = 110000;
-		CursorMem = 1024;
-		CursorOff = 0x1000;
-		linearSize = 4096;
-		maxWidth = 1280;
-		maxHeight = 1024;	/* ???? */
-
-		par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
 		break;
 	case FB_ACCEL_NEOMAGIC_NM2230:
 		videoRam = 3008;
 		maxClock = 110000;
-		CursorMem = 1024;
-		CursorOff = 0x1000;
-		linearSize = 4096;
-		maxWidth = 1280;
-		maxHeight = 1024;	/* ???? */
-
-		par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
 		break;
 	case FB_ACCEL_NEOMAGIC_NM2360:
 		videoRam = 4096;
 		maxClock = 110000;
-		CursorMem = 1024;
-		CursorOff = 0x1000;
-		linearSize = 4096;
-		maxWidth = 1280;
-		maxHeight = 1024;	/* ???? */
-
-		par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
 		break;
 	case FB_ACCEL_NEOMAGIC_NM2380:
 		videoRam = 6144;
 		maxClock = 110000;
+		break;
+	}
+	switch (info->fix.accel) {
+	case FB_ACCEL_NEOMAGIC_NM2070:
+	case FB_ACCEL_NEOMAGIC_NM2090:
+	case FB_ACCEL_NEOMAGIC_NM2093:
+		CursorMem = 2048;
+		CursorOff = 0x100;
+		break;
+	case FB_ACCEL_NEOMAGIC_NM2097:
+	case FB_ACCEL_NEOMAGIC_NM2160:
+		CursorMem = 1024;
+		CursorOff = 0x100;
+		break;
+	case FB_ACCEL_NEOMAGIC_NM2200:
+	case FB_ACCEL_NEOMAGIC_NM2230:
+	case FB_ACCEL_NEOMAGIC_NM2360:
+	case FB_ACCEL_NEOMAGIC_NM2380:
 		CursorMem = 1024;
 		CursorOff = 0x1000;
-		linearSize = 8192;
-		maxWidth = 1280;
-		maxHeight = 1024;	/* ???? */
 
 		par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
 		break;
@@ -2032,7 +1981,7 @@ static int __devinit neo_init_hw(struct fb_info *info)
 */
 	par->maxClock = maxClock;
 	par->cursorOff = CursorOff;
-	return ((videoRam * 1024));
+	return videoRam * 1024;
 }
 
 
-- 
cgit v1.2.3


From c6b044d6bab5e2878d408666469362fc200a889a Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 21:31:45 -0700
Subject: neofb: drop the xtimings structure

Remove the xtimings structure which only stored some values to be used
later (mostly once).  Calculate and use these values in places they are
needed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/neofb.c    | 88 ++++++++++++++++++++++--------------------------
 include/video/neomagic.h | 17 ----------
 2 files changed, 40 insertions(+), 65 deletions(-)

diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
index 669b8c196bb..25172b2a2a9 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -259,15 +259,20 @@ static void neoCalcVCLK(const struct fb_info *info,
  */
 
 static int vgaHWInit(const struct fb_var_screeninfo *var,
-		     const struct fb_info *info,
-		     struct neofb_par *par, struct xtimings *timings)
+		     struct neofb_par *par)
 {
+	int hsync_end = var->xres + var->right_margin + var->hsync_len;
+	int htotal = (hsync_end + var->left_margin) >> 3;
+	int vsync_start = var->yres + var->lower_margin;
+	int vsync_end = vsync_start + var->vsync_len;
+	int vtotal = vsync_end + var->upper_margin;
+
 	par->MiscOutReg = 0x23;
 
-	if (!(timings->sync & FB_SYNC_HOR_HIGH_ACT))
+	if (!(var->sync & FB_SYNC_HOR_HIGH_ACT))
 		par->MiscOutReg |= 0x40;
 
-	if (!(timings->sync & FB_SYNC_VERT_HIGH_ACT))
+	if (!(var->sync & FB_SYNC_VERT_HIGH_ACT))
 		par->MiscOutReg |= 0x80;
 
 	/*
@@ -282,25 +287,25 @@ static int vgaHWInit(const struct fb_var_screeninfo *var,
 	/*
 	 * CRTC Controller
 	 */
-	par->CRTC[0] = (timings->HTotal >> 3) - 5;
-	par->CRTC[1] = (timings->HDisplay >> 3) - 1;
-	par->CRTC[2] = (timings->HDisplay >> 3) - 1;
-	par->CRTC[3] = (((timings->HTotal >> 3) - 1) & 0x1F) | 0x80;
-	par->CRTC[4] = (timings->HSyncStart >> 3);
-	par->CRTC[5] = ((((timings->HTotal >> 3) - 1) & 0x20) << 2)
-	    | (((timings->HSyncEnd >> 3)) & 0x1F);
-	par->CRTC[6] = (timings->VTotal - 2) & 0xFF;
-	par->CRTC[7] = (((timings->VTotal - 2) & 0x100) >> 8)
-	    | (((timings->VDisplay - 1) & 0x100) >> 7)
-	    | ((timings->VSyncStart & 0x100) >> 6)
-	    | (((timings->VDisplay - 1) & 0x100) >> 5)
-	    | 0x10 | (((timings->VTotal - 2) & 0x200) >> 4)
-	    | (((timings->VDisplay - 1) & 0x200) >> 3)
-	    | ((timings->VSyncStart & 0x200) >> 2);
+	par->CRTC[0] = htotal - 5;
+	par->CRTC[1] = (var->xres >> 3) - 1;
+	par->CRTC[2] = (var->xres >> 3) - 1;
+	par->CRTC[3] = ((htotal - 1) & 0x1F) | 0x80;
+	par->CRTC[4] = ((var->xres + var->right_margin) >> 3);
+	par->CRTC[5] = (((htotal - 1) & 0x20) << 2)
+	    | (((hsync_end >> 3)) & 0x1F);
+	par->CRTC[6] = (vtotal - 2) & 0xFF;
+	par->CRTC[7] = (((vtotal - 2) & 0x100) >> 8)
+	    | (((var->yres - 1) & 0x100) >> 7)
+	    | ((vsync_start & 0x100) >> 6)
+	    | (((var->yres - 1) & 0x100) >> 5)
+	    | 0x10 | (((vtotal - 2) & 0x200) >> 4)
+	    | (((var->yres - 1) & 0x200) >> 3)
+	    | ((vsync_start & 0x200) >> 2);
 	par->CRTC[8] = 0x00;
-	par->CRTC[9] = (((timings->VDisplay - 1) & 0x200) >> 4) | 0x40;
+	par->CRTC[9] = (((var->yres - 1) & 0x200) >> 4) | 0x40;
 
-	if (timings->dblscan)
+	if (var->vmode & FB_VMODE_DOUBLE)
 		par->CRTC[9] |= 0x80;
 
 	par->CRTC[10] = 0x00;
@@ -309,13 +314,13 @@ static int vgaHWInit(const struct fb_var_screeninfo *var,
 	par->CRTC[13] = 0x00;
 	par->CRTC[14] = 0x00;
 	par->CRTC[15] = 0x00;
-	par->CRTC[16] = timings->VSyncStart & 0xFF;
-	par->CRTC[17] = (timings->VSyncEnd & 0x0F) | 0x20;
-	par->CRTC[18] = (timings->VDisplay - 1) & 0xFF;
+	par->CRTC[16] = vsync_start & 0xFF;
+	par->CRTC[17] = (vsync_end & 0x0F) | 0x20;
+	par->CRTC[18] = (var->yres - 1) & 0xFF;
 	par->CRTC[19] = var->xres_virtual >> 4;
 	par->CRTC[20] = 0x00;
-	par->CRTC[21] = (timings->VDisplay - 1) & 0xFF;
-	par->CRTC[22] = (timings->VTotal - 1) & 0xFF;
+	par->CRTC[21] = (var->yres - 1) & 0xFF;
+	par->CRTC[22] = (vtotal - 1) & 0xFF;
 	par->CRTC[23] = 0xC3;
 	par->CRTC[24] = 0xFF;
 
@@ -736,11 +741,11 @@ neofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 static int neofb_set_par(struct fb_info *info)
 {
 	struct neofb_par *par = info->par;
-	struct xtimings timings;
 	unsigned char temp;
 	int i, clock_hi = 0;
 	int lcd_stretch;
 	int hoffset, voffset;
+	int vsync_start, vtotal;
 
 	DBG("neofb_set_par");
 
@@ -748,28 +753,15 @@ static int neofb_set_par(struct fb_info *info)
 
 	vgaHWProtect(1);	/* Blank the screen */
 
-	timings.dblscan = info->var.vmode & FB_VMODE_DOUBLE;
-	timings.interlaced = info->var.vmode & FB_VMODE_INTERLACED;
-	timings.HDisplay = info->var.xres;
-	timings.HSyncStart = timings.HDisplay + info->var.right_margin;
-	timings.HSyncEnd = timings.HSyncStart + info->var.hsync_len;
-	timings.HTotal = timings.HSyncEnd + info->var.left_margin;
-	timings.VDisplay = info->var.yres;
-	timings.VSyncStart = timings.VDisplay + info->var.lower_margin;
-	timings.VSyncEnd = timings.VSyncStart + info->var.vsync_len;
-	timings.VTotal = timings.VSyncEnd + info->var.upper_margin;
-	timings.sync = info->var.sync;
-	timings.pixclock = PICOS2KHZ(info->var.pixclock);
-
-	if (timings.pixclock < 1)
-		timings.pixclock = 1;
+	vsync_start = info->var.yres + info->var.lower_margin;
+	vtotal = vsync_start + info->var.vsync_len + info->var.upper_margin;
 
 	/*
 	 * This will allocate the datastructure and initialize all of the
 	 * generic VGA registers.
 	 */
 
-	if (vgaHWInit(&info->var, info, par, &timings))
+	if (vgaHWInit(&info->var, par))
 		return -EINVAL;
 
 	/*
@@ -808,10 +800,10 @@ static int neofb_set_par(struct fb_info *info)
 	par->ExtCRTDispAddr = 0x10;
 
 	/* Vertical Extension */
-	par->VerticalExt = (((timings.VTotal - 2) & 0x400) >> 10)
-	    | (((timings.VDisplay - 1) & 0x400) >> 9)
-	    | (((timings.VSyncStart) & 0x400) >> 8)
-	    | (((timings.VSyncStart) & 0x400) >> 7);
+	par->VerticalExt = (((vtotal - 2) & 0x400) >> 10)
+	    | (((info->var.yres - 1) & 0x400) >> 9)
+	    | (((vsync_start) & 0x400) >> 8)
+	    | (((vsync_start) & 0x400) >> 7);
 
 	/* Fast write bursts on unless disabled. */
 	if (par->pci_burst)
@@ -972,7 +964,7 @@ static int neofb_set_par(struct fb_info *info)
 	 * Calculate the VCLK that most closely matches the requested dot
 	 * clock.
 	 */
-	neoCalcVCLK(info, par, timings.pixclock);
+	neoCalcVCLK(info, par, PICOS2KHZ(info->var.pixclock));
 
 	/* Since we program the clocks ourselves, always use VCLK3. */
 	par->MiscOutReg |= 0x0C;
diff --git a/include/video/neomagic.h b/include/video/neomagic.h
index a9e118a1cd1..38910da0ae5 100644
--- a/include/video/neomagic.h
+++ b/include/video/neomagic.h
@@ -90,23 +90,6 @@
 #define PCI_CHIP_NM2360 0x0006
 #define PCI_CHIP_NM2380 0x0016
 
-
-struct xtimings {
-	unsigned int pixclock;
-	unsigned int HDisplay;
-	unsigned int HSyncStart;
-	unsigned int HSyncEnd;
-	unsigned int HTotal;
-	unsigned int VDisplay;
-	unsigned int VSyncStart;
-	unsigned int VSyncEnd;
-	unsigned int VTotal;
-	unsigned int sync;
-	int dblscan;
-	int interlaced;
-};
-
-
 /* --------------------------------------------------------------------- */
 
 typedef volatile struct {
-- 
cgit v1.2.3


From 4a25e41831ee851c1365d8b41decc22493b18e6d Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Wed, 23 Jul 2008 21:31:46 -0700
Subject: video: sh7760fb: SH7760/SH7763 LCDC framebuffer driver

Framebuffer driver for the SH7760/SH7763 integrated LCD controller.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Siegfried Schaefer <s.schaefer@schaefer-edv.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/fb/sh7760fb.txt | 131 +++++++++
 drivers/video/Kconfig         |  13 +
 drivers/video/Makefile        |   1 +
 drivers/video/sh7760fb.c      | 658 ++++++++++++++++++++++++++++++++++++++++++
 include/asm-sh/sh7760fb.h     | 197 +++++++++++++
 5 files changed, 1000 insertions(+)
 create mode 100644 Documentation/fb/sh7760fb.txt
 create mode 100644 drivers/video/sh7760fb.c
 create mode 100644 include/asm-sh/sh7760fb.h

diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt
new file mode 100644
index 00000000000..c87bfe5c630
--- /dev/null
+++ b/Documentation/fb/sh7760fb.txt
@@ -0,0 +1,131 @@
+SH7760/SH7763 integrated LCDC Framebuffer driver
+================================================
+
+0. Overwiew
+-----------
+The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
+supports (in theory) resolutions ranging from 1x1 to 1024x1024,
+with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels.
+
+Caveats:
+* Framebuffer memory must be a large chunk allocated at the top
+  of Area3 (HW requirement). Because of this requirement you should NOT
+  make the driver a module since at runtime it may become impossible to
+  get a large enough contiguous chunk of memory.
+
+* The driver does not support changing resolution while loaded
+  (displays aren't hotpluggable anyway)
+
+* Heavy flickering may be observed
+  a) if you're using 15/16bit color modes at >= 640x480 px resolutions,
+  b) during PCMCIA (or any other slow bus) activity.
+
+* Rotation works only 90degress clockwise, and only if horizontal
+  resolution is <= 320 pixels.
+
+files:   drivers/video/sh7760fb.c
+        include/asm-sh/sh7760fb.h
+        Documentation/fb/sh7760fb.txt
+
+1. Platform setup
+-----------------
+SH7760:
+ Video data is fetched via the DMABRG DMA engine, so you have to
+ configure the SH DMAC for DMABRG mode (write 0x94808080 to the
+ DMARSRA register somewhere at boot).
+
+ PFC registers PCCR and PCDR must be set to peripheral mode.
+ (write zeros to both).
+
+The driver does NOT do the above for you since board setup is, well, job
+of the board setup code.
+
+2. Panel definitions
+--------------------
+The LCDC must explicitly be told about the type of LCD panel
+attached.  Data must be wrapped in a "struct sh7760fb_platdata" and
+passed to the driver as platform_data.
+
+Suggest you take a closer look at the SH7760 Manual, Section 30.
+(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf)
+
+The following code illustrates what needs to be done to
+get the framebuffer working on a 640x480 TFT:
+
+====================== cut here ======================================
+
+#include <linux/fb.h>
+#include <asm/sh7760fb.h>
+
+/*
+ * NEC NL6440bc26-01 640x480 TFT
+ * dotclock 25175 kHz
+ * Xres                640     Yres            480
+ * Htotal      800     Vtotal          525
+ * HsynStart   656     VsynStart       490
+ * HsynLenn    30      VsynLenn        2
+ *
+ * The linux framebuffer layer does not use the syncstart/synclen
+ * values but right/left/upper/lower margin values. The comments
+ * for the x_margin explain how to calculate those from given
+ * panel sync timings.
+ */
+static struct fb_videomode nl6448bc26 = {
+       .name           = "NL6448BC26",
+       .refresh        = 60,
+       .xres           = 640,
+       .yres           = 480,
+       .pixclock       = 39683,        /* in picoseconds! */
+       .hsync_len      = 30,
+       .vsync_len      = 2,
+       .left_margin    = 114,  /* HTOT - (HSYNSLEN + HSYNSTART) */
+       .right_margin   = 16,   /* HSYNSTART - XRES */
+       .upper_margin   = 33,   /* VTOT - (VSYNLEN + VSYNSTART) */
+       .lower_margin   = 10,   /* VSYNSTART - YRES */
+       .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+       .vmode          = FB_VMODE_NONINTERLACED,
+       .flag           = 0,
+};
+
+static struct sh7760fb_platdata sh7760fb_nl6448 = {
+       .def_mode       = &nl6448bc26,
+       .ldmtr          = LDMTR_TFT_COLOR_16,   /* 16bit TFT panel */
+       .lddfr          = LDDFR_8BPP,           /* we want 8bit output */
+       .ldpmmr         = 0x0070,
+       .ldpspr         = 0x0500,
+       .ldaclnr        = 0,
+       .ldickr         = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) |
+                         LDICKR_CLKDIV(1),
+       .rotate         = 0,
+       .novsync        = 1,
+       .blank          = NULL,
+};
+
+/* SH7760:
+ * 0xFE300800: 256 * 4byte xRGB palette ram
+ * 0xFE300C00: 42 bytes ctrl registers
+ */
+static struct resource sh7760_lcdc_res[] = {
+       [0] = {
+               .start  = 0xFE300800,
+               .end    = 0xFE300CFF,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = 65,
+               .end    = 65,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device sh7760_lcdc_dev = {
+       .dev    = {
+               .platform_data = &sh7760fb_nl6448,
+       },
+       .name           = "sh7760-lcdc",
+       .id             = -1,
+       .resource       = sh7760_lcdc_res,
+       .num_resources  = ARRAY_SIZE(sh7760_lcdc_res),
+};
+
+====================== cut here ======================================
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index c1b7db84341..70d135e0cc4 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1991,6 +1991,19 @@ config FB_COBALT
 	tristate "Cobalt server LCD frame buffer support"
 	depends on FB && MIPS_COBALT
 
+config FB_SH7760
+       bool "SH7760/SH7763 LCDC support"
+       depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763)
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       help
+         Support for the SH7760/SH7763 integrated (D)STN/TFT LCD Controller.
+         Supports display resolutions up to 1024x1024 pixel, grayscale and
+         color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+         and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+         panels <= 320 pixel horizontal resolution.
+
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
 	depends on FB
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 35803259775..0ebc1bfd251 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
 obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
 obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
 obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
+obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
 obj-$(CONFIG_FB_IMX)              += imxfb.o
 obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
 obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c
new file mode 100644
index 00000000000..4d0e28c5790
--- /dev/null
+++ b/drivers/video/sh7760fb.c
@@ -0,0 +1,658 @@
+/*
+ * SH7760/SH7763 LCDC Framebuffer driver.
+ *
+ * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
+ *             Manuel Lauss <mano@roarinelk.homelinux.net>
+ * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ *  This file is subject to the terms and conditions of the GNU General
+ *  Public License.  See the file COPYING in the main directory of this
+ *  archive for more details.
+ *
+ * PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.txt!
+ *
+ * Thanks to Siegfried Schaefer <s.schaefer at schaefer-edv.de>
+ *     for his original source and testing!
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/sh7760fb.h>
+
+struct sh7760fb_par {
+	void __iomem *base;
+	int irq;
+
+	struct sh7760fb_platdata *pd;	/* display information */
+
+	dma_addr_t fbdma;	/* physical address */
+
+	int rot;		/* rotation enabled? */
+
+	u32 pseudo_palette[16];
+
+	struct platform_device *dev;
+	struct resource *ioarea;
+	struct completion vsync;	/* vsync irq event */
+};
+
+static irqreturn_t sh7760fb_irq(int irq, void *data)
+{
+	struct completion *c = data;
+
+	complete(c);
+
+	return IRQ_HANDLED;
+}
+
+static void sh7760fb_wait_vsync(struct fb_info *info)
+{
+	struct sh7760fb_par *par = info->par;
+
+	if (par->pd->novsync)
+		return;
+
+	iowrite16(ioread16(par->base + LDINTR) & ~VINT_CHECK,
+		  par->base + LDINTR);
+
+	if (par->irq < 0) {
+		/* poll for vert. retrace: status bit is sticky */
+		while (!(ioread16(par->base + LDINTR) & VINT_CHECK))
+			cpu_relax();
+	} else {
+		/* a "wait_for_irq_event(par->irq)" would be extremely nice */
+		init_completion(&par->vsync);
+		enable_irq(par->irq);
+		wait_for_completion(&par->vsync);
+		disable_irq_nosync(par->irq);
+	}
+}
+
+/* wait_for_lps - wait until power supply has reached a certain state. */
+static int wait_for_lps(struct sh7760fb_par *par, int val)
+{
+	int i = 100;
+	while (--i && ((ioread16(par->base + LDPMMR) & 3) != val))
+		msleep(1);
+
+	if (i <= 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+/* en/disable the LCDC */
+static int sh7760fb_blank(int blank, struct fb_info *info)
+{
+	struct sh7760fb_par *par = info->par;
+	struct sh7760fb_platdata *pd = par->pd;
+	unsigned short cntr = ioread16(par->base + LDCNTR);
+	unsigned short intr = ioread16(par->base + LDINTR);
+	int lps;
+
+	if (blank == FB_BLANK_UNBLANK) {
+		intr |= VINT_START;
+		cntr = LDCNTR_DON2 | LDCNTR_DON;
+		lps = 3;
+	} else {
+		intr &= ~VINT_START;
+		cntr = LDCNTR_DON2;
+		lps = 0;
+	}
+
+	if (pd->blank)
+		pd->blank(blank);
+
+	iowrite16(intr, par->base + LDINTR);
+	iowrite16(cntr, par->base + LDCNTR);
+
+	return wait_for_lps(par, lps);
+}
+
+/* set color registers */
+static int sh7760fb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
+{
+	struct sh7760fb_par *par = info->par;
+	u32 s = cmap->start;
+	u32 l = cmap->len;
+	u16 *r = cmap->red;
+	u16 *g = cmap->green;
+	u16 *b = cmap->blue;
+	u32 col, tmo;
+	int ret;
+
+	ret = 0;
+
+	sh7760fb_wait_vsync(info);
+
+	/* request palette access */
+	iowrite16(LDPALCR_PALEN, par->base + LDPALCR);
+
+	/* poll for access grant */
+	tmo = 100;
+	while (!(ioread16(par->base + LDPALCR) & LDPALCR_PALS) && (--tmo))
+		cpu_relax();
+
+	if (!tmo) {
+		ret = 1;
+		dev_dbg(info->dev, "no palette access!\n");
+		goto out;
+	}
+
+	while (l && (s < 256)) {
+		col = ((*r) & 0xff) << 16;
+		col |= ((*g) & 0xff) << 8;
+		col |= ((*b) & 0xff);
+		col &= SH7760FB_PALETTE_MASK;
+
+		if (s < 16)
+			((u32 *) (info->pseudo_palette))[s] = s;
+
+		s++;
+		l--;
+		r++;
+		g++;
+		b++;
+	}
+out:
+	iowrite16(0, par->base + LDPALCR);
+	return ret;
+}
+
+static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info,
+		       unsigned long stride)
+{
+	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+	strcpy(fix->id, "sh7760-lcdc");
+
+	fix->smem_start = (unsigned long)info->screen_base;
+	fix->smem_len = info->screen_size;
+
+	fix->line_length = stride;
+}
+
+static int sh7760fb_get_color_info(struct device *dev,
+				   u16 lddfr, int *bpp, int *gray)
+{
+	int lbpp, lgray;
+
+	lgray = lbpp = 0;
+
+	switch (lddfr & LDDFR_COLOR_MASK) {
+	case LDDFR_1BPP_MONO:
+		lgray = 1;
+		lbpp = 1;
+		break;
+	case LDDFR_2BPP_MONO:
+		lgray = 1;
+		lbpp = 2;
+		break;
+	case LDDFR_4BPP_MONO:
+		lgray = 1;
+	case LDDFR_4BPP:
+		lbpp = 4;
+		break;
+	case LDDFR_6BPP_MONO:
+		lgray = 1;
+	case LDDFR_8BPP:
+		lbpp = 8;
+		break;
+	case LDDFR_16BPP_RGB555:
+	case LDDFR_16BPP_RGB565:
+		lbpp = 16;
+		lgray = 0;
+		break;
+	default:
+		dev_dbg(dev, "unsupported LDDFR bit depth.\n");
+		return -EINVAL;
+	}
+
+	if (bpp)
+		*bpp = lbpp;
+	if (gray)
+		*gray = lgray;
+
+	return 0;
+}
+
+static int sh7760fb_check_var(struct fb_var_screeninfo *var,
+			      struct fb_info *info)
+{
+	struct fb_fix_screeninfo *fix = &info->fix;
+	struct sh7760fb_par *par = info->par;
+	int ret, bpp;
+
+	/* get color info from register value */
+	ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
+	if (ret)
+		return ret;
+
+	var->bits_per_pixel = bpp;
+
+	if ((var->grayscale) && (var->bits_per_pixel == 1))
+		fix->visual = FB_VISUAL_MONO10;
+	else if (var->bits_per_pixel >= 15)
+		fix->visual = FB_VISUAL_TRUECOLOR;
+	else
+		fix->visual = FB_VISUAL_PSEUDOCOLOR;
+
+	/* TODO: add some more validation here */
+	return 0;
+}
+
+/*
+ * sh7760fb_set_par - set videomode.
+ *
+ * NOTE: The rotation, grayscale and DSTN codepaths are
+ *     totally untested!
+ */
+static int sh7760fb_set_par(struct fb_info *info)
+{
+	struct sh7760fb_par *par = info->par;
+	struct fb_videomode *vm = par->pd->def_mode;
+	unsigned long sbase, dstn_off, ldsarl, stride;
+	unsigned short hsynp, hsynw, htcn, hdcn;
+	unsigned short vsynp, vsynw, vtln, vdln;
+	unsigned short lddfr, ldmtr;
+	int ret, bpp, gray;
+
+	par->rot = par->pd->rotate;
+
+	/* rotate only works with xres <= 320 */
+	if (par->rot && (vm->xres > 320)) {
+		dev_dbg(info->dev, "rotation disabled due to display size\n");
+		par->rot = 0;
+	}
+
+	/* calculate LCDC reg vals from display parameters */
+	hsynp = vm->right_margin + vm->xres;
+	hsynw = vm->hsync_len;
+	htcn = vm->left_margin + hsynp + hsynw;
+	hdcn = vm->xres;
+	vsynp = vm->lower_margin + vm->yres;
+	vsynw = vm->vsync_len;
+	vtln = vm->upper_margin + vsynp + vsynw;
+	vdln = vm->yres;
+
+	/* get color info from register value */
+	ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, &gray);
+	if (ret)
+		return ret;
+
+	dev_dbg(info->dev, "%dx%d %dbpp %s (orientation %s)\n", hdcn,
+		vdln, bpp, gray ? "grayscale" : "color",
+		par->rot ? "rotated" : "normal");
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	lddfr = par->pd->lddfr | (1 << 8);
+#else
+	lddfr = par->pd->lddfr & ~(1 << 8);
+#endif
+
+	ldmtr = par->pd->ldmtr;
+
+	if (!(vm->sync & FB_SYNC_HOR_HIGH_ACT))
+		ldmtr |= LDMTR_CL1POL;
+	if (!(vm->sync & FB_SYNC_VERT_HIGH_ACT))
+		ldmtr |= LDMTR_FLMPOL;
+
+	/* shut down LCDC before changing display parameters */
+	sh7760fb_blank(FB_BLANK_POWERDOWN, info);
+
+	iowrite16(par->pd->ldickr, par->base + LDICKR);	/* pixclock */
+	iowrite16(ldmtr, par->base + LDMTR);	/* polarities */
+	iowrite16(lddfr, par->base + LDDFR);	/* color/depth */
+	iowrite16((par->rot ? 1 << 13 : 0), par->base + LDSMR);	/* rotate */
+	iowrite16(par->pd->ldpmmr, par->base + LDPMMR);	/* Power Management */
+	iowrite16(par->pd->ldpspr, par->base + LDPSPR);	/* Power Supply Ctrl */
+
+	/* display resolution */
+	iowrite16(((htcn >> 3) - 1) | (((hdcn >> 3) - 1) << 8),
+		  par->base + LDHCNR);
+	iowrite16(vdln - 1, par->base + LDVDLNR);
+	iowrite16(vtln - 1, par->base + LDVTLNR);
+	/* h/v sync signals */
+	iowrite16((vsynp - 1) | ((vsynw - 1) << 12), par->base + LDVSYNR);
+	iowrite16(((hsynp >> 3) - 1) | (((hsynw >> 3) - 1) << 12),
+		  par->base + LDHSYNR);
+	/* AC modulation sig */
+	iowrite16(par->pd->ldaclnr, par->base + LDACLNR);
+
+	stride = (par->rot) ? vtln : hdcn;
+	if (!gray)
+		stride *= (bpp + 7) >> 3;
+	else {
+		if (bpp == 1)
+			stride >>= 3;
+		else if (bpp == 2)
+			stride >>= 2;
+		else if (bpp == 4)
+			stride >>= 1;
+		/* 6 bpp == 8 bpp */
+	}
+
+	/* if rotated, stride must be power of 2 */
+	if (par->rot) {
+		unsigned long bit = 1 << 31;
+		while (bit) {
+			if (stride & bit)
+				break;
+			bit >>= 1;
+		}
+		if (stride & ~bit)
+			stride = bit << 1;	/* not P-o-2, round up */
+	}
+	iowrite16(stride, par->base + LDLAOR);
+
+	/* set display mem start address */
+	sbase = (unsigned long)par->fbdma;
+	if (par->rot)
+		sbase += (hdcn - 1) * stride;
+
+	iowrite32(sbase, par->base + LDSARU);
+
+	/*
+	 * for DSTN need to set address for lower half.
+	 * I (mlau) don't know which address to set it to,
+	 * so I guessed at (stride * yres/2).
+	 */
+	if (((ldmtr & 0x003f) >= LDMTR_DSTN_MONO_8) &&
+	    ((ldmtr & 0x003f) <= LDMTR_DSTN_COLOR_16)) {
+
+		dev_dbg(info->dev, " ***** DSTN untested! *****\n");
+
+		dstn_off = stride;
+		if (par->rot)
+			dstn_off *= hdcn >> 1;
+		else
+			dstn_off *= vdln >> 1;
+
+		ldsarl = sbase + dstn_off;
+	} else
+		ldsarl = 0;
+
+	iowrite32(ldsarl, par->base + LDSARL);	/* mem for lower half of DSTN */
+
+	encode_fix(&info->fix, info, stride);
+	sh7760fb_check_var(&info->var, info);
+
+	sh7760fb_blank(FB_BLANK_UNBLANK, info);	/* panel on! */
+
+	dev_dbg(info->dev, "hdcn  : %6d htcn  : %6d\n", hdcn, htcn);
+	dev_dbg(info->dev, "hsynw : %6d hsynp : %6d\n", hsynw, hsynp);
+	dev_dbg(info->dev, "vdln  : %6d vtln  : %6d\n", vdln, vtln);
+	dev_dbg(info->dev, "vsynw : %6d vsynp : %6d\n", vsynw, vsynp);
+	dev_dbg(info->dev, "clksrc: %6d clkdiv: %6d\n",
+		(par->pd->ldickr >> 12) & 3, par->pd->ldickr & 0x1f);
+	dev_dbg(info->dev, "ldpmmr: 0x%04x ldpspr: 0x%04x\n", par->pd->ldpmmr,
+		par->pd->ldpspr);
+	dev_dbg(info->dev, "ldmtr : 0x%04x lddfr : 0x%04x\n", ldmtr, lddfr);
+	dev_dbg(info->dev, "ldlaor: %ld\n", stride);
+	dev_dbg(info->dev, "ldsaru: 0x%08lx ldsarl: 0x%08lx\n", sbase, ldsarl);
+
+	return 0;
+}
+
+static struct fb_ops sh7760fb_ops = {
+	.owner = THIS_MODULE,
+	.fb_blank = sh7760fb_blank,
+	.fb_check_var = sh7760fb_check_var,
+	.fb_setcmap = sh7760fb_setcmap,
+	.fb_set_par = sh7760fb_set_par,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+};
+
+static void sh7760fb_free_mem(struct fb_info *info)
+{
+	struct sh7760fb_par *par = info->par;
+
+	if (!info->screen_base)
+		return;
+
+	dma_free_coherent(info->dev, info->screen_size,
+			  info->screen_base, par->fbdma);
+
+	par->fbdma = 0;
+	info->screen_base = NULL;
+	info->screen_size = 0;
+}
+
+/* allocate the framebuffer memory. This memory must be in Area3,
+ * (dictated by the DMA engine) and contiguous, at a 512 byte boundary.
+ */
+static int sh7760fb_alloc_mem(struct fb_info *info)
+{
+	struct sh7760fb_par *par = info->par;
+	void *fbmem;
+	unsigned long vram;
+	int ret, bpp;
+
+	if (info->screen_base)
+		return 0;
+
+	/* get color info from register value */
+	ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL);
+	if (ret) {
+		printk(KERN_ERR "colinfo\n");
+		return ret;
+	}
+
+	/* min VRAM: xres_min = 16, yres_min = 1, bpp = 1: 2byte -> 1 page
+	   max VRAM: xres_max = 1024, yres_max = 1024, bpp = 16: 2MB */
+
+	vram = info->var.xres * info->var.yres;
+	if (info->var.grayscale) {
+		if (bpp == 1)
+			vram >>= 3;
+		else if (bpp == 2)
+			vram >>= 2;
+		else if (bpp == 4)
+			vram >>= 1;
+	} else if (bpp > 8)
+		vram *= 2;
+	if ((vram < 1) || (vram > 1024 * 2048)) {
+		dev_dbg(info->dev, "too much VRAM required. Check settings\n");
+		return -ENODEV;
+	}
+
+	if (vram < PAGE_SIZE)
+		vram = PAGE_SIZE;
+
+	fbmem = dma_alloc_coherent(info->dev, vram, &par->fbdma, GFP_KERNEL);
+
+	if (!fbmem)
+		return -ENOMEM;
+
+	if ((par->fbdma & SH7760FB_DMA_MASK) != SH7760FB_DMA_MASK) {
+		sh7760fb_free_mem(info);
+		dev_err(info->dev, "kernel gave me memory at 0x%08lx, which is"
+			"unusable for the LCDC\n", (unsigned long)par->fbdma);
+		return -ENOMEM;
+	}
+
+	info->screen_base = fbmem;
+	info->screen_size = vram;
+
+	return 0;
+}
+
+static int __devinit sh7760fb_probe(struct platform_device *pdev)
+{
+	struct fb_info *info;
+	struct resource *res;
+	struct sh7760fb_par *par;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(res == NULL)) {
+		dev_err(&pdev->dev, "invalid resource\n");
+		return -EINVAL;
+	}
+
+	info = framebuffer_alloc(sizeof(struct sh7760fb_par), &pdev->dev);
+	if (!info)
+		return -ENOMEM;
+
+	par = info->par;
+	par->dev = pdev;
+
+	par->pd = pdev->dev.platform_data;
+	if (!par->pd) {
+		dev_dbg(info->dev, "no display setup data!\n");
+		ret = -ENODEV;
+		goto out_fb;
+	}
+
+	par->ioarea = request_mem_region(res->start,
+					 (res->end - res->start), pdev->name);
+	if (!par->ioarea) {
+		dev_err(&pdev->dev, "mmio area busy\n");
+		ret = -EBUSY;
+		goto out_fb;
+	}
+
+	par->base = ioremap_nocache(res->start, res->end - res->start + 1);
+	if (!par->base) {
+		dev_err(&pdev->dev, "cannot remap\n");
+		ret = -ENODEV;
+		goto out_res;
+	}
+
+	iowrite16(0, par->base + LDINTR);	/* disable vsync irq */
+	par->irq = platform_get_irq(pdev, 0);
+	if (par->irq >= 0) {
+		ret = request_irq(par->irq, sh7760fb_irq, 0,
+				  "sh7760-lcdc", &par->vsync);
+		if (ret) {
+			dev_err(&pdev->dev, "cannot grab IRQ\n");
+			par->irq = -ENXIO;
+		} else
+			disable_irq_nosync(par->irq);
+	}
+
+	fb_videomode_to_var(&info->var, par->pd->def_mode);
+
+	ret = sh7760fb_alloc_mem(info);
+	if (ret) {
+		dev_dbg(info->dev, "framebuffer memory allocation failed!\n");
+		goto out_unmap;
+	}
+
+	info->pseudo_palette = par->pseudo_palette;
+
+	/* fixup color register bitpositions. These are fixed by hardware */
+	info->var.red.offset = 11;
+	info->var.red.length = 5;
+	info->var.red.msb_right = 0;
+
+	info->var.green.offset = 5;
+	info->var.green.length = 6;
+	info->var.green.msb_right = 0;
+
+	info->var.blue.offset = 0;
+	info->var.blue.length = 5;
+	info->var.blue.msb_right = 0;
+
+	info->var.transp.offset = 0;
+	info->var.transp.length = 0;
+	info->var.transp.msb_right = 0;
+
+	/* set the DON2 bit now, before cmap allocation, as it will randomize
+	 * palette memory.
+	 */
+	iowrite16(LDCNTR_DON2, par->base + LDCNTR);
+	info->fbops = &sh7760fb_ops;
+
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret) {
+		dev_dbg(info->dev, "Unable to allocate cmap memory\n");
+		goto out_mem;
+	}
+
+	ret = register_framebuffer(info);
+	if (ret < 0) {
+		dev_dbg(info->dev, "cannot register fb!\n");
+		goto out_cmap;
+	}
+	platform_set_drvdata(pdev, info);
+
+	printk(KERN_INFO "%s: memory at phys 0x%08lx-0x%08lx, size %ld KiB\n",
+	       pdev->name,
+	       (unsigned long)par->fbdma,
+	       (unsigned long)(par->fbdma + info->screen_size - 1),
+	       info->screen_size >> 10);
+
+	return 0;
+
+out_cmap:
+	sh7760fb_blank(FB_BLANK_POWERDOWN, info);
+	fb_dealloc_cmap(&info->cmap);
+out_mem:
+	sh7760fb_free_mem(info);
+out_unmap:
+	if (par->irq >= 0)
+		free_irq(par->irq, &par->vsync);
+	iounmap(par->base);
+out_res:
+	release_resource(par->ioarea);
+	kfree(par->ioarea);
+out_fb:
+	framebuffer_release(info);
+	return ret;
+}
+
+static int __devexit sh7760fb_remove(struct platform_device *dev)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+	struct sh7760fb_par *par = info->par;
+
+	sh7760fb_blank(FB_BLANK_POWERDOWN, info);
+	unregister_framebuffer(info);
+	fb_dealloc_cmap(&info->cmap);
+	sh7760fb_free_mem(info);
+	if (par->irq >= 0)
+		free_irq(par->irq, par);
+	iounmap(par->base);
+	release_resource(par->ioarea);
+	kfree(par->ioarea);
+	framebuffer_release(info);
+	platform_set_drvdata(dev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver sh7760_lcdc_driver = {
+	.driver = {
+		   .name = "sh7760-lcdc",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = sh7760fb_probe,
+	.remove = __devexit_p(sh7760fb_remove),
+};
+
+static int __init sh7760fb_init(void)
+{
+	return platform_driver_register(&sh7760_lcdc_driver);
+}
+
+static void __exit sh7760fb_exit(void)
+{
+	platform_driver_unregister(&sh7760_lcdc_driver);
+}
+
+module_init(sh7760fb_init);
+module_exit(sh7760fb_exit);
+
+MODULE_AUTHOR("Nobuhiro Iwamatsu, Manuel Lauss");
+MODULE_DESCRIPTION("FBdev for SH7760/63 integrated LCD Controller");
+MODULE_LICENSE("GPL");
diff --git a/include/asm-sh/sh7760fb.h b/include/asm-sh/sh7760fb.h
new file mode 100644
index 00000000000..8767f61acec
--- /dev/null
+++ b/include/asm-sh/sh7760fb.h
@@ -0,0 +1,197 @@
+/*
+ * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver.
+ *
+ * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
+ * 			Manuel Lauss <mano@roarinelk.homelinux.net>
+ * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ */
+
+#ifndef _ASM_SH_SH7760FB_H
+#define _ASM_SH_SH7760FB_H
+
+/*
+ * some bits of the colormap registers should be written as zero.
+ * create a mask for that.
+ */
+#define SH7760FB_PALETTE_MASK 0x00f8fcf8
+
+/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */
+#define SH7760FB_DMA_MASK 0x0C000000
+
+/* palette */
+#define LDPR(x) (((x) << 2))
+
+/* framebuffer registers and bits */
+#define LDICKR 0x400
+#define LDMTR 0x402
+/* see sh7760fb.h for LDMTR bits */
+#define LDDFR 0x404
+#define LDDFR_PABD (1 << 8)
+#define LDDFR_COLOR_MASK 0x7F
+#define LDSMR 0x406
+#define LDSMR_ROT (1 << 13)
+#define LDSARU 0x408
+#define LDSARL 0x40c
+#define LDLAOR 0x410
+#define LDPALCR 0x412
+#define LDPALCR_PALS (1 << 4)
+#define LDPALCR_PALEN (1 << 0)
+#define LDHCNR 0x414
+#define LDHSYNR 0x416
+#define LDVDLNR 0x418
+#define LDVTLNR 0x41a
+#define LDVSYNR 0x41c
+#define LDACLNR 0x41e
+#define LDINTR 0x420
+#define LDPMMR 0x424
+#define LDPSPR 0x426
+#define LDCNTR 0x428
+#define LDCNTR_DON (1 << 0)
+#define LDCNTR_DON2 (1 << 4)
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define LDLIRNR       0x440
+/* LDINTR bit */
+# define LDINTR_MINTEN (1 << 15)
+# define LDINTR_FINTEN (1 << 14)
+# define LDINTR_VSINTEN (1 << 13)
+# define LDINTR_VEINTEN (1 << 12)
+# define LDINTR_MINTS (1 << 11)
+# define LDINTR_FINTS (1 << 10)
+# define LDINTR_VSINTS (1 << 9)
+# define LDINTR_VEINTS (1 << 8)
+# define VINT_START (LDINTR_VSINTEN)
+# define VINT_CHECK (LDINTR_VSINTS)
+#else
+/* LDINTR bit */
+# define LDINTR_VINTSEL (1 << 12)
+# define LDINTR_VINTE (1 << 8)
+# define LDINTR_VINTS (1 << 0)
+# define VINT_START (LDINTR_VINTSEL)
+# define VINT_CHECK (LDINTR_VINTS)
+#endif
+
+/* HSYNC polarity inversion */
+#define LDMTR_FLMPOL (1 << 15)
+
+/* VSYNC polarity inversion */
+#define LDMTR_CL1POL (1 << 14)
+
+/* DISPLAY-ENABLE polarity inversion */
+#define LDMTR_DISPEN_LOWACT (1 << 13)
+
+/* DISPLAY DATA BUS polarity inversion */
+#define LDMTR_DPOL_LOWACT (1 << 12)
+
+/* AC modulation signal enable */
+#define LDMTR_MCNT (1 << 10)
+
+/* Disable output of HSYNC during VSYNC period */
+#define LDMTR_CL1CNT (1 << 9)
+
+/* Disable output of VSYNC during VSYNC period */
+#define LDMTR_CL2CNT (1 << 8)
+
+/* Display types supported by the LCDC */
+#define LDMTR_STN_MONO_4       0x00
+#define LDMTR_STN_MONO_8       0x01
+#define LDMTR_STN_COLOR_4      0x08
+#define LDMTR_STN_COLOR_8      0x09
+#define LDMTR_STN_COLOR_12     0x0A
+#define LDMTR_STN_COLOR_16     0x0B
+#define LDMTR_DSTN_MONO_8      0x11
+#define LDMTR_DSTN_MONO_16     0x13
+#define LDMTR_DSTN_COLOR_8     0x19
+#define LDMTR_DSTN_COLOR_12    0x1A
+#define LDMTR_DSTN_COLOR_16    0x1B
+#define LDMTR_TFT_COLOR_16     0x2B
+
+/* framebuffer color layout */
+#define LDDFR_1BPP_MONO 0x00
+#define LDDFR_2BPP_MONO 0x01
+#define LDDFR_4BPP_MONO 0x02
+#define LDDFR_6BPP_MONO 0x04
+#define LDDFR_4BPP 0x0A
+#define LDDFR_8BPP 0x0C
+#define LDDFR_16BPP_RGB555 0x1D
+#define LDDFR_16BPP_RGB565 0x2D
+
+/* LCDC Pixclock sources */
+#define LCDC_CLKSRC_BUSCLOCK 0
+#define LCDC_CLKSRC_PERIPHERAL 1
+#define LCDC_CLKSRC_EXTERNAL 2
+
+#define LDICKR_CLKSRC(x) \
+       (((x) & 3) << 12)
+
+/* LCDC pixclock input divider. Set to 1 at a minimum! */
+#define LDICKR_CLKDIV(x) \
+       ((x) & 0x1f)
+
+struct sh7760fb_platdata {
+
+	/* Set this member to a valid fb_videmode for the display you
+	 * wish to use.  The following members must be initialized:
+	 * xres, yres, hsync_len, vsync_len, sync,
+	 * {left,right,upper,lower}_margin.
+	 * The driver uses the above members to calculate register values
+	 * and memory requirements. Other members are ignored but may
+	 * be used by other framebuffer layer components.
+	 */
+	struct fb_videomode *def_mode;
+
+	/* LDMTR includes display type and signal polarity.  The
+	 * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo
+	 * data above; however the polarities of the following signals
+	 * must be encoded in the ldmtr member:
+	 * Display Enable signal (default high-active)  DISPEN_LOWACT
+	 * Display Data signals (default high-active)   DPOL_LOWACT
+	 * AC Modulation signal (default off)           MCNT
+	 * Hsync-During-Vsync suppression (default off) CL1CNT
+	 * Vsync-during-vsync suppression (default off) CL2CNT
+	 * NOTE: also set a display type!
+	 * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16})
+	 */
+	u16 ldmtr;
+
+	/* LDDFR controls framebuffer image format (depth, organization)
+	 * Use ONE of the LDDFR_?BPP_* macros!
+	 */
+	u16 lddfr;
+
+	/* LDPMMR and LDPSPR control the timing of the power signals
+	 * for the display. Please read the SH7760 Hardware Manual,
+	 * Chapters 30.3.17, 30.3.18 and 30.4.6!
+	 */
+	u16 ldpmmr;
+	u16 ldpspr;
+
+	/* LDACLNR contains the line numbers after which the AC modulation
+	 * signal is to toggle. Set to ZERO for TFTs or displays which
+	 * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual).
+	 */
+	u16 ldaclnr;
+
+	/* LDICKR contains information on pixelclock source and config.
+	 * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros.
+	 * minimal value for CLKDIV() must be 1!.
+	 */
+	u16 ldickr;
+
+	/* set this member to 1 if you wish to use the LCDC's hardware
+	 * rotation function.  This is limited to displays <= 320x200
+	 * pixels resolution!
+	 */
+	int rotate;		/* set to 1 to rotate 90 CCW */
+
+	/* set this to 1 to suppress vsync irq use. */
+	int novsync;
+
+	/* blanking hook for platform. Set this if your platform can do
+	 * more than the LCDC in terms of blanking (e.g. disable clock
+	 * generator / backlight power supply / etc.
+	 */
+	void (*blank) (int);
+};
+
+#endif /* _ASM_SH_SH7760FB_H */
-- 
cgit v1.2.3


From 2d04a4a72d7e1519b4838f24bdd4b5d0f3f426dc Mon Sep 17 00:00:00 2001
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Wed, 23 Jul 2008 21:31:48 -0700
Subject: fbcon: bgcolor fix

The fourth bit of the background color is the blink property bit, not the
intensity bit, as for the foreground color.  Therefore it shouldn't be
included in the background color.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/console/fbcon.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index 0135e039545..beb6a74fc7f 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -92,7 +92,7 @@ struct fbcon_ops {
 #define attr_fgcol(fgshift,s)    \
 	(((s) >> (fgshift)) & 0x0f)
 #define attr_bgcol(bgshift,s)    \
-	(((s) >> (bgshift)) & 0x0f)
+	(((s) >> (bgshift)) & 0x07)
 
 /* Monochrome */
 #define attr_bold(s) \
-- 
cgit v1.2.3


From 3e074058d72486676f6fdf6fe803200c62dcb403 Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Wed, 23 Jul 2008 21:31:48 -0700
Subject: fbdev: LCD backlight driver using Atmel PWM driver

This patch adds a platform driver using the ATMEL PWM driver to control a
backlight which requires a PWM signal and optional GPIO signal for discrete
on/off signal.  It has been tested on Favr-32 board from EarthLCD.

The driver is configurable by supplying a struct with the platform data.  See
the include/linux/atmel-pwm-bl.h for details.

The board code for Favr-32 will be submitted to the AVR32 kernel list.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/Kconfig        |  12 ++
 drivers/video/backlight/Makefile       |   1 +
 drivers/video/backlight/atmel-pwm-bl.c | 244 +++++++++++++++++++++++++++++++++
 include/linux/atmel-pwm-bl.h           |  43 ++++++
 4 files changed, 300 insertions(+)
 create mode 100644 drivers/video/backlight/atmel-pwm-bl.c
 create mode 100644 include/linux/atmel-pwm-bl.h

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index b289e197e55..98d9faf4970 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -87,6 +87,18 @@ config BACKLIGHT_ATMEL_LCDC
 	  If in doubt, it's safe to enable this option; it doesn't kick
 	  in unless the board's description says it's wired that way.
 
+config BACKLIGHT_ATMEL_PWM
+	tristate "Atmel PWM backlight control"
+	depends on BACKLIGHT_CLASS_DEVICE && ATMEL_PWM
+	default n
+	help
+	  Say Y here if you want to use the PWM peripheral in Atmel AT91 and
+	  AVR32 devices. This driver will need additional platform data to know
+	  which PWM instance to use and how to configure it.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called atmel-pwm-bl.
+
 config BACKLIGHT_CORGI
 	tristate "Generic (aka Sharp Corgi) Backlight Driver"
 	depends on BACKLIGHT_CLASS_DEVICE
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 7d31c14088a..d8a08e468cc 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_LCD_PLATFORM)	   += platform_lcd.o
 obj-$(CONFIG_LCD_VGG2432A4)	   += vgg2432a4.o
 
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
+obj-$(CONFIG_BACKLIGHT_ATMEL_PWM)    += atmel-pwm-bl.o
 obj-$(CONFIG_BACKLIGHT_CORGI)	+= corgi_bl.o
 obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c
new file mode 100644
index 00000000000..505c0823a10
--- /dev/null
+++ b/drivers/video/backlight/atmel-pwm-bl.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * Backlight driver using Atmel PWM peripheral.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/backlight.h>
+#include <linux/atmel_pwm.h>
+#include <linux/atmel-pwm-bl.h>
+
+struct atmel_pwm_bl {
+	const struct atmel_pwm_bl_platform_data	*pdata;
+	struct backlight_device			*bldev;
+	struct platform_device			*pdev;
+	struct pwm_channel			pwmc;
+	int					gpio_on;
+};
+
+static int atmel_pwm_bl_set_intensity(struct backlight_device *bd)
+{
+	struct atmel_pwm_bl *pwmbl = bl_get_data(bd);
+	int intensity = bd->props.brightness;
+	int pwm_duty;
+
+	if (bd->props.power != FB_BLANK_UNBLANK)
+		intensity = 0;
+	if (bd->props.fb_blank != FB_BLANK_UNBLANK)
+		intensity = 0;
+
+	if (pwmbl->pdata->pwm_active_low)
+		pwm_duty = pwmbl->pdata->pwm_duty_min + intensity;
+	else
+		pwm_duty = pwmbl->pdata->pwm_duty_max - intensity;
+
+	if (pwm_duty > pwmbl->pdata->pwm_duty_max)
+		pwm_duty = pwmbl->pdata->pwm_duty_max;
+	if (pwm_duty < pwmbl->pdata->pwm_duty_min)
+		pwm_duty = pwmbl->pdata->pwm_duty_min;
+
+	if (!intensity) {
+		if (pwmbl->gpio_on != -1) {
+			gpio_set_value(pwmbl->gpio_on,
+					0 ^ pwmbl->pdata->on_active_low);
+		}
+		pwm_channel_writel(&pwmbl->pwmc, PWM_CUPD, pwm_duty);
+		pwm_channel_disable(&pwmbl->pwmc);
+	} else {
+		pwm_channel_enable(&pwmbl->pwmc);
+		pwm_channel_writel(&pwmbl->pwmc, PWM_CUPD, pwm_duty);
+		if (pwmbl->gpio_on != -1) {
+			gpio_set_value(pwmbl->gpio_on,
+					1 ^ pwmbl->pdata->on_active_low);
+		}
+	}
+
+	return 0;
+}
+
+static int atmel_pwm_bl_get_intensity(struct backlight_device *bd)
+{
+	struct atmel_pwm_bl *pwmbl = bl_get_data(bd);
+	u8 intensity;
+
+	if (pwmbl->pdata->pwm_active_low) {
+		intensity = pwm_channel_readl(&pwmbl->pwmc, PWM_CDTY) -
+			pwmbl->pdata->pwm_duty_min;
+	} else {
+		intensity = pwmbl->pdata->pwm_duty_max -
+			pwm_channel_readl(&pwmbl->pwmc, PWM_CDTY);
+	}
+
+	return intensity;
+}
+
+static int atmel_pwm_bl_init_pwm(struct atmel_pwm_bl *pwmbl)
+{
+	unsigned long pwm_rate = pwmbl->pwmc.mck;
+	unsigned long prescale = DIV_ROUND_UP(pwm_rate,
+			(pwmbl->pdata->pwm_frequency *
+			 pwmbl->pdata->pwm_compare_max)) - 1;
+
+	/*
+	 * Prescale must be power of two and maximum 0xf in size because of
+	 * hardware limit. PWM speed will be:
+	 *	PWM module clock speed / (2 ^ prescale).
+	 */
+	prescale = fls(prescale);
+	if (prescale > 0xf)
+		prescale = 0xf;
+
+	pwm_channel_writel(&pwmbl->pwmc, PWM_CMR, prescale);
+	pwm_channel_writel(&pwmbl->pwmc, PWM_CDTY,
+			pwmbl->pdata->pwm_duty_min +
+			pwmbl->bldev->props.brightness);
+	pwm_channel_writel(&pwmbl->pwmc, PWM_CPRD,
+			pwmbl->pdata->pwm_compare_max);
+
+	dev_info(&pwmbl->pdev->dev, "Atmel PWM backlight driver "
+			"(%lu Hz)\n", pwmbl->pwmc.mck /
+			pwmbl->pdata->pwm_compare_max /
+			(1 << prescale));
+
+	return pwm_channel_enable(&pwmbl->pwmc);
+}
+
+static struct backlight_ops atmel_pwm_bl_ops = {
+	.get_brightness = atmel_pwm_bl_get_intensity,
+	.update_status  = atmel_pwm_bl_set_intensity,
+};
+
+static int atmel_pwm_bl_probe(struct platform_device *pdev)
+{
+	const struct atmel_pwm_bl_platform_data *pdata;
+	struct backlight_device *bldev;
+	struct atmel_pwm_bl *pwmbl;
+	int retval;
+
+	pwmbl = kzalloc(sizeof(struct atmel_pwm_bl), GFP_KERNEL);
+	if (!pwmbl)
+		return -ENOMEM;
+
+	pwmbl->pdev = pdev;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		retval = -ENODEV;
+		goto err_free_mem;
+	}
+
+	if (pdata->pwm_compare_max < pdata->pwm_duty_max ||
+			pdata->pwm_duty_min > pdata->pwm_duty_max ||
+			pdata->pwm_frequency == 0) {
+		retval = -EINVAL;
+		goto err_free_mem;
+	}
+
+	pwmbl->pdata = pdata;
+	pwmbl->gpio_on = pdata->gpio_on;
+
+	retval = pwm_channel_alloc(pdata->pwm_channel, &pwmbl->pwmc);
+	if (retval)
+		goto err_free_mem;
+
+	if (pwmbl->gpio_on != -1) {
+		retval = gpio_request(pwmbl->gpio_on, "gpio_atmel_pwm_bl");
+		if (retval) {
+			pwmbl->gpio_on = -1;
+			goto err_free_pwm;
+		}
+
+		/* Turn display off by defatult. */
+		retval = gpio_direction_output(pwmbl->gpio_on,
+				0 ^ pdata->on_active_low);
+		if (retval)
+			goto err_free_gpio;
+	}
+
+	bldev = backlight_device_register("atmel-pwm-bl",
+			&pdev->dev, pwmbl, &atmel_pwm_bl_ops);
+	if (IS_ERR(bldev)) {
+		retval = PTR_ERR(bldev);
+		goto err_free_gpio;
+	}
+
+	pwmbl->bldev = bldev;
+
+	platform_set_drvdata(pdev, pwmbl);
+
+	/* Power up the backlight by default at middle intesity. */
+	bldev->props.power = FB_BLANK_UNBLANK;
+	bldev->props.max_brightness = pdata->pwm_duty_max - pdata->pwm_duty_min;
+	bldev->props.brightness = bldev->props.max_brightness / 2;
+
+	retval = atmel_pwm_bl_init_pwm(pwmbl);
+	if (retval)
+		goto err_free_bl_dev;
+
+	atmel_pwm_bl_set_intensity(bldev);
+
+	return 0;
+
+err_free_bl_dev:
+	platform_set_drvdata(pdev, NULL);
+	backlight_device_unregister(bldev);
+err_free_gpio:
+	if (pwmbl->gpio_on != -1)
+		gpio_free(pwmbl->gpio_on);
+err_free_pwm:
+	pwm_channel_free(&pwmbl->pwmc);
+err_free_mem:
+	kfree(pwmbl);
+	return retval;
+}
+
+static int __exit atmel_pwm_bl_remove(struct platform_device *pdev)
+{
+	struct atmel_pwm_bl *pwmbl = platform_get_drvdata(pdev);
+
+	if (pwmbl->gpio_on != -1) {
+		gpio_set_value(pwmbl->gpio_on, 0);
+		gpio_free(pwmbl->gpio_on);
+	}
+	pwm_channel_disable(&pwmbl->pwmc);
+	pwm_channel_free(&pwmbl->pwmc);
+	backlight_device_unregister(pwmbl->bldev);
+	platform_set_drvdata(pdev, NULL);
+	kfree(pwmbl);
+
+	return 0;
+}
+
+static struct platform_driver atmel_pwm_bl_driver = {
+	.driver = {
+		.name = "atmel-pwm-bl",
+	},
+	/* REVISIT add suspend() and resume() */
+	.remove = __exit_p(atmel_pwm_bl_remove),
+};
+
+static int __init atmel_pwm_bl_init(void)
+{
+	return platform_driver_probe(&atmel_pwm_bl_driver, atmel_pwm_bl_probe);
+}
+module_init(atmel_pwm_bl_init);
+
+static void __exit atmel_pwm_bl_exit(void)
+{
+	platform_driver_unregister(&atmel_pwm_bl_driver);
+}
+module_exit(atmel_pwm_bl_exit);
+
+MODULE_AUTHOR("Hans-Christian egtvedt <hans-christian.egtvedt@atmel.com>");
+MODULE_DESCRIPTION("Atmel PWM backlight driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/atmel-pwm-bl.h b/include/linux/atmel-pwm-bl.h
new file mode 100644
index 00000000000..0153a47806c
--- /dev/null
+++ b/include/linux/atmel-pwm-bl.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Driver for the AT32AP700X PS/2 controller (PSIF).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_ATMEL_PWM_BL_H
+#define __INCLUDE_ATMEL_PWM_BL_H
+
+/**
+ * struct atmel_pwm_bl_platform_data
+ * @pwm_channel: which PWM channel in the PWM module to use.
+ * @pwm_frequency: PWM frequency to generate, the driver will try to be as
+ *	close as the prescaler allows.
+ * @pwm_compare_max: value to use in the PWM channel compare register.
+ * @pwm_duty_max: maximum duty cycle value, must be less than or equal to
+ *	pwm_compare_max.
+ * @pwm_duty_min: minimum duty cycle value, must be less than pwm_duty_max.
+ * @pwm_active_low: set to one if the low part of the PWM signal increases the
+ *	brightness of the backlight.
+ * @gpio_on: GPIO line to control the backlight on/off, set to -1 if not used.
+ * @on_active_low: set to one if the on/off signal is on when GPIO is low.
+ *
+ * This struct must be added to the platform device in the board code. It is
+ * used by the atmel-pwm-bl driver to setup the GPIO to control on/off and the
+ * PWM device.
+ */
+struct atmel_pwm_bl_platform_data {
+	unsigned int pwm_channel;
+	unsigned int pwm_frequency;
+	unsigned int pwm_compare_max;
+	unsigned int pwm_duty_max;
+	unsigned int pwm_duty_min;
+	unsigned int pwm_active_low;
+	int gpio_on;
+	unsigned int on_active_low;
+};
+
+#endif /* __INCLUDE_ATMEL_PWM_BL_H */
-- 
cgit v1.2.3


From cba603bf514c101bf48f6adf393c3d00ed457a57 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Wed, 23 Jul 2008 21:31:49 -0700
Subject: fbcon: remove stray semicolons

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/console/fbcon.h | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index beb6a74fc7f..de1b1365279 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -146,10 +146,8 @@ static inline int attr_col_ec(int shift, struct vc_data *vc,
 	return is_fg ? fg : bg;
 }
 
-#define attr_bgcol_ec(bgshift,vc,info)		\
-	attr_col_ec(bgshift,vc,info,0);
-#define attr_fgcol_ec(fgshift,vc,info)		\
-	attr_col_ec(fgshift,vc,info,1);
+#define attr_bgcol_ec(bgshift, vc, info) attr_col_ec(bgshift, vc, info, 0)
+#define attr_fgcol_ec(fgshift, vc, info) attr_col_ec(fgshift, vc, info, 1)
 
 /* Font */
 #define REFCOUNT(fd)	(((int *)(fd))[-1])
-- 
cgit v1.2.3


From 5bb49fcd501aa9fd3d321a22b7c01d9b0db7ab36 Mon Sep 17 00:00:00 2001
From: Philippe De Muyter <phdm@macqel.be>
Date: Wed, 23 Jul 2008 21:31:50 -0700
Subject: video/fb: cleanup FB_MAJOR usage

Currently, linux/major.h defines a GRAPHDEV_MAJOR (29) that nobody uses,
and linux/fb.h defines the real FB_MAJOR (also 29), that only fbmem.c
needs.  Drop GRAPHDEV_MAJOR from major.h, move FB_MAJOR definition from
fb.h to major.h, and fix fbmem.c to use major.h's definition.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/fbmem.c | 1 +
 include/linux/fb.h    | 1 -
 include/linux/major.h | 2 +-
 3 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 6b487801eea..5d84b343109 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -35,6 +35,7 @@
 #include <linux/device.h>
 #include <linux/efi.h>
 #include <linux/fb.h>
+#include <linux/major.h>
 
 #include <asm/fb.h>
 
diff --git a/include/linux/fb.h b/include/linux/fb.h
index a084d133586..3b8870e32af 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -8,7 +8,6 @@ struct dentry;
 
 /* Definitions of frame buffers						*/
 
-#define FB_MAJOR		29
 #define FB_MAX			32	/* sufficient for now */
 
 /* ioctls
diff --git a/include/linux/major.h b/include/linux/major.h
index 0cb98053537..53d5fafd85c 100644
--- a/include/linux/major.h
+++ b/include/linux/major.h
@@ -53,7 +53,7 @@
 #define STL_SIOMEMMAJOR		28
 #define ACSI_MAJOR		28
 #define AZTECH_CDROM_MAJOR	29
-#define GRAPHDEV_MAJOR		29   /* SparcLinux & Linux/68k /dev/fb */
+#define FB_MAJOR		29   /* /dev/fb* framebuffers */
 #define CM206_CDROM_MAJOR	32
 #define IDE2_MAJOR		33
 #define IDE3_MAJOR		34
-- 
cgit v1.2.3


From b340e8a57ef381e69c99a7a8ede61a6bf71a8014 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Wed, 23 Jul 2008 21:31:51 -0700
Subject: auxdisplay: small cleanups

- Use BUILD_BUG_ON for CFAG12864B_SIZE instead of runtime-check

- Use get_zeroed_page()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Miguel Ojeda Sandonis <maxextreme@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/auxdisplay/cfag12864b.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c
index 683509f013a..eacb175f6bd 100644
--- a/drivers/auxdisplay/cfag12864b.c
+++ b/drivers/auxdisplay/cfag12864b.c
@@ -336,16 +336,9 @@ static int __init cfag12864b_init(void)
 			"ks0108 is not initialized\n");
 		goto none;
 	}
+	BUILD_BUG_ON(PAGE_SIZE < CFAG12864B_SIZE);
 
-	if (PAGE_SIZE < CFAG12864B_SIZE) {
-		printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
-			"page size (%i) < cfag12864b size (%i)\n",
-			(unsigned int)PAGE_SIZE, CFAG12864B_SIZE);
-		ret = -ENOMEM;
-		goto none;
-	}
-
-	cfag12864b_buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
+	cfag12864b_buffer = (unsigned char *) get_zeroed_page(GFP_KERNEL);
 	if (cfag12864b_buffer == NULL) {
 		printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
 			"can't get a free page\n");
@@ -367,8 +360,6 @@ static int __init cfag12864b_init(void)
 	if (cfag12864b_workqueue == NULL)
 		goto cachealloced;
 
-	memset(cfag12864b_buffer, 0, CFAG12864B_SIZE);
-
 	cfag12864b_clear();
 	cfag12864b_on();
 
-- 
cgit v1.2.3


From f9247273cb69ba101877e946d2d83044409cc8c5 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Thu, 24 Jul 2008 17:22:13 +0100
Subject: UFS: add const to parser token table

This patch adds a "const" to the parser token table. I've done an
allmodconfig build to see if this produces any warnings/failures and the
patch includes a fix for the only warning that was produced.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Alexander Viro <aviro@redhat.com>
Acked-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ufs/super.c         | 2 +-
 include/linux/parser.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 85b22b5977f..506f724055c 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -1232,7 +1232,7 @@ static int ufs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 {
 	struct ufs_sb_info *sbi = UFS_SB(vfs->mnt_sb);
 	unsigned mval = sbi->s_mount_opt & UFS_MOUNT_UFSTYPE;
-	struct match_token *tp = tokens;
+	const struct match_token *tp = tokens;
 
 	while (tp->token != Opt_onerror_panic && tp->token != mval)
 		++tp;
diff --git a/include/linux/parser.h b/include/linux/parser.h
index 7dcd0507575..cc554ca8bc7 100644
--- a/include/linux/parser.h
+++ b/include/linux/parser.h
@@ -14,7 +14,7 @@ struct match_token {
 	const char *pattern;
 };
 
-typedef struct match_token match_table_t[];
+typedef const struct match_token match_table_t[];
 
 /* Maximum number of arguments that match_token will find in a pattern */
 enum {MAX_OPT_ARGS = 3};
-- 
cgit v1.2.3


From 6209ed9d8443b63c36d340908530fa470c4d4fff Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 24 Jul 2008 12:49:26 -0700
Subject: x86-64: make BUILD_IRQ() also reset section back

Commit 9d25d4db81833029d30b7b03cc1000cbbe09e192 ("x86: BUILD_IRQ say
.text to avoid .data.percpu") added a ".text" specifier to make sure
that BUILD_IRQ() builds the irq trampoline in the text segment rather
than in some random left-over segment that the compiler happened to
leave the asm in.

However, we should also make sure that we switch back by adding a
".previous" at the end, so that there are no subtle issues with
subsequent compiler-generated code.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/irqinit_64.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index 9414125f19c..1f26fd9ec4f 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -46,7 +46,8 @@
 	asm("\n.text\n.p2align\n"		\
 	    "IRQ" #nr "_interrupt:\n\t"		\
 	    "push $~(" #nr ") ; "		\
-	    "jmp common_interrupt");
+	    "jmp common_interrupt\n"		\
+	    ".previous");
 
 #define BI(x,y) \
 	BUILD_IRQ(x##y)
-- 
cgit v1.2.3


From e2d2867ff8700d7431c68c089ff5f5ed7f2d5b40 Mon Sep 17 00:00:00 2001
From: Chris Wright <chrisw@sous-sol.org>
Date: Thu, 24 Jul 2008 20:43:34 +0000
Subject: When verifying the decoded header before decoding the object
 identifier (expecting a SPNEGO pseudo-mechanism oid), the test to verify it
 is a primitive encoding is compared against the asn1 class.  Primitive is not
 a class.  This brings check in line with similar check for krb/ntlmssp oid.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/asn1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 42765465701..6bb440b257b 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -494,7 +494,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 		/*      remember to free obj->oid */
 		rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
 		if (rc) {
-			if ((tag == ASN1_OJI) && (cls == ASN1_PRI)) {
+			if ((tag == ASN1_OJI) && (con == ASN1_PRI)) {
 				rc = asn1_oid_decode(&ctx, end, &oid, &oidlen);
 				if (rc) {
 					rc = compare_oid(oid, oidlen,
-- 
cgit v1.2.3


From 708e5f9eb68589b87724af3f0fb4e681dfdfd69f Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:11 +0200
Subject: ide: always call ->init_chipset method in do_ide_setup_pci_device()

Call ->init_chipset method also for 'tried_config' / '!pciirq' conditions.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/setup-pci.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index b15cad58dc8..a95d5108023 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -499,20 +499,21 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 	 */
 	pciirq = dev->irq;
 
+	/*
+	 * This allows offboard ide-pci cards the enable a BIOS,
+	 * verify interrupt settings of split-mirror pci-config
+	 * space, place chipset into init-mode, and/or preserve
+	 * an interrupt if the card is not native ide support.
+	 */
+	ret = d->init_chipset ? d->init_chipset(dev, d->name) : 0;
+	if (ret < 0)
+		goto out;
+
 	/* Is it an "IDE storage" device in non-PCI mode? */
 	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) {
 		if (noisy)
 			printk(KERN_INFO "%s: not 100%% native mode: "
 				"will probe irqs later\n", d->name);
-		/*
-		 * This allows offboard ide-pci cards the enable a BIOS,
-		 * verify interrupt settings of split-mirror pci-config
-		 * space, place chipset into init-mode, and/or preserve
-		 * an interrupt if the card is not native ide support.
-		 */
-		ret = d->init_chipset ? d->init_chipset(dev, d->name) : 0;
-		if (ret < 0)
-			goto out;
 		pciirq = ret;
 	} else if (tried_config) {
 		if (noisy)
@@ -524,11 +525,6 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 				d->name, pciirq);
 		pciirq = 0;
 	} else {
-		if (d->init_chipset) {
-			ret = d->init_chipset(dev, d->name);
-			if (ret < 0)
-				goto out;
-		}
 		if (noisy)
 			printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
 				d->name, pciirq);
-- 
cgit v1.2.3


From a95925a309cd9a2e7f5a5713fd70e0dadb09890c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:11 +0200
Subject: ide: respect dev->irq in do_ide_setup_pci_device() also if
 'tried_config'

* If device is in the PCI native mode respect dev->irq regardless of
  'tried_config' in do_ide_setup_pci_device().

* Drop no longer needed 'config' argument from ide_setup_pci_controller().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/setup-pci.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index a95d5108023..58f4a95f6f5 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -393,14 +393,14 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
  *	@dev: PCI device
  *	@d: IDE port info
  *	@noisy: verbose flag
- *	@config: returned as 1 if we configured the hardware
  *
  *	Set up the PCI and controller side of the IDE interface. This brings
  *	up the PCI side of the device, checks that the device is enabled
  *	and enables it if need be
  */
 
-static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_info *d, int noisy, int *config)
+static int ide_setup_pci_controller(struct pci_dev *dev,
+				    const struct ide_port_info *d, int noisy)
 {
 	int ret;
 	u16 pcicmd;
@@ -421,7 +421,6 @@ static int ide_setup_pci_controller(struct pci_dev *dev, const struct ide_port_i
 		ret = ide_pci_configure(dev, d);
 		if (ret < 0)
 			goto out;
-		*config = 1;
 		printk(KERN_INFO "%s: device enabled (Linux)\n", d->name);
 	}
 
@@ -487,10 +486,9 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 				   const struct ide_port_info *d,
 				   u8 noisy)
 {
-	int tried_config = 0;
 	int pciirq, ret;
 
-	ret = ide_setup_pci_controller(dev, d, noisy, &tried_config);
+	ret = ide_setup_pci_controller(dev, d, noisy);
 	if (ret < 0)
 		goto out;
 
@@ -515,10 +513,6 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 			printk(KERN_INFO "%s: not 100%% native mode: "
 				"will probe irqs later\n", d->name);
 		pciirq = ret;
-	} else if (tried_config) {
-		if (noisy)
-			printk(KERN_INFO "%s: will probe irqs later\n", d->name);
-		pciirq = 0;
 	} else if (!pciirq) {
 		if (noisy)
 			printk(KERN_WARNING "%s: bad irq (%d): will probe later\n",
-- 
cgit v1.2.3


From a742d6cf0b37b1a96a1549b1fda0d6b19e0185c2 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:12 +0200
Subject: ide: move ide_setup_pci_controller() call to
 ide_setup_pci_device[s]()

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/setup-pci.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 58f4a95f6f5..98c663d62b9 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -488,10 +488,6 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 {
 	int pciirq, ret;
 
-	ret = ide_setup_pci_controller(dev, d, noisy);
-	if (ret < 0)
-		goto out;
-
 	/*
 	 * Can we trust the reported IRQ?
 	 */
@@ -534,6 +530,10 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 	int ret;
 
+	ret = ide_setup_pci_controller(dev, d, 1);
+	if (ret < 0)
+		goto out;
+
 	ret = do_ide_setup_pci_device(dev, d, 1);
 
 	if (ret >= 0) {
@@ -542,7 +542,7 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 
 		ret = ide_host_add(d, hws, NULL);
 	}
-
+out:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(ide_setup_pci_device);
@@ -555,6 +555,10 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
 	for (i = 0; i < 2; i++) {
+		ret = ide_setup_pci_controller(pdev[i], d, !i);
+		if (ret < 0)
+			goto out;
+
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
 
 		/*
-- 
cgit v1.2.3


From 8c2eece50a368c7986bae0b3e52739558dd71b51 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:12 +0200
Subject: ide: call ide_pci_setup_ports() before do_ide_setup_pci_device()

* Call ide_pci_setup_ports() before do_ide_setup_pci_device()
  in ide_setup_pci_device[s]().

While at it:

* Remove stale FIXMEs.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/setup-pci.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 98c663d62b9..b85de71fdc8 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -534,14 +534,16 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 	if (ret < 0)
 		goto out;
 
+	ide_pci_setup_ports(dev, d, 0, &hw[0], &hws[0]);
+
 	ret = do_ide_setup_pci_device(dev, d, 1);
+	if (ret < 0)
+		goto out;
 
-	if (ret >= 0) {
-		/* FIXME: silent failure can happen */
-		ide_pci_setup_ports(dev, d, ret, &hw[0], &hws[0]);
+	/* fixup IRQ */
+	hw[1].irq = hw[0].irq = ret;
 
-		ret = ide_host_add(d, hws, NULL);
-	}
+	ret = ide_host_add(d, hws, NULL);
 out:
 	return ret;
 }
@@ -559,6 +561,8 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 		if (ret < 0)
 			goto out;
 
+		ide_pci_setup_ports(pdev[i], d, 0, &hw[i*2], &hws[i*2]);
+
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
 
 		/*
@@ -568,8 +572,8 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 		if (ret < 0)
 			goto out;
 
-		/* FIXME: silent failure can happen */
-		ide_pci_setup_ports(pdev[i], d, ret, &hw[i*2], &hws[i*2]);
+		/* fixup IRQ */
+		hw[i*2 + 1].irq = hw[i*2].irq = ret;
 	}
 
 	ret = ide_host_add(d, hws, NULL);
-- 
cgit v1.2.3


From 6cdf6eb357c2681596b7b1672b92396ba82333d4 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:14 +0200
Subject: ide: add ->dev and ->host_priv fields to struct ide_host

* Add 'struct device *dev[2]' and 'void *host_priv' fields
  to struct ide_host.

* Set ->dev[] in ide_host_alloc_all()/ide_setup_pci_device[s]().

* Pass 'void *priv' argument to ide_setup_pci_device[s]()
  and use it to set ->host_priv.

* Set PCI dev's ->driver_data to point to the struct ide_host
  instance if PCI host driver wants to use ->host_priv.

* Rename ide_setup_pci_device[s]() to ide_pci_init_{one,two}().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c        |  3 +++
 drivers/ide/pci/aec62xx.c      |  2 +-
 drivers/ide/pci/alim15x3.c     |  2 +-
 drivers/ide/pci/amd74xx.c      |  2 +-
 drivers/ide/pci/atiixp.c       |  2 +-
 drivers/ide/pci/cmd64x.c       |  2 +-
 drivers/ide/pci/cs5530.c       |  2 +-
 drivers/ide/pci/cs5535.c       |  2 +-
 drivers/ide/pci/cy82c693.c     |  2 +-
 drivers/ide/pci/generic.c      |  2 +-
 drivers/ide/pci/hpt34x.c       |  2 +-
 drivers/ide/pci/hpt366.c       |  4 ++--
 drivers/ide/pci/it8213.c       |  2 +-
 drivers/ide/pci/it821x.c       |  2 +-
 drivers/ide/pci/jmicron.c      |  2 +-
 drivers/ide/pci/ns87415.c      |  2 +-
 drivers/ide/pci/opti621.c      |  2 +-
 drivers/ide/pci/pdc202xx_new.c |  4 ++--
 drivers/ide/pci/pdc202xx_old.c |  2 +-
 drivers/ide/pci/piix.c         |  2 +-
 drivers/ide/pci/rz1000.c       |  2 +-
 drivers/ide/pci/sc1200.c       |  2 +-
 drivers/ide/pci/serverworks.c  |  2 +-
 drivers/ide/pci/siimage.c      |  2 +-
 drivers/ide/pci/sis5513.c      |  2 +-
 drivers/ide/pci/sl82c105.c     |  2 +-
 drivers/ide/pci/slc90e66.c     |  2 +-
 drivers/ide/pci/tc86c001.c     |  2 +-
 drivers/ide/pci/triflex.c      |  2 +-
 drivers/ide/pci/trm290.c       |  2 +-
 drivers/ide/pci/via82cxxx.c    |  2 +-
 drivers/ide/setup-pci.c        | 52 ++++++++++++++++++++++++++++++++++++------
 include/linux/ide.h            |  7 ++++--
 33 files changed, 85 insertions(+), 41 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 4aa76c45375..890c15b1b3a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1604,6 +1604,9 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
 		return NULL;
 	}
 
+	if (hws[0])
+		host->dev[0] = hws[0]->dev;
+
 	return host;
 }
 EXPORT_SYMBOL_GPL(ide_host_alloc_all);
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index fbc43e121e6..7a5d246fe9b 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -273,7 +273,7 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
 		}
 	}
 
-	err = ide_setup_pci_device(dev, &d);
+	err = ide_pci_init_one(dev, &d, NULL);
 	if (err)
 		pci_disable_device(dev);
 
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 5ef7817ac64..7f96e7ca386 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -565,7 +565,7 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
 	if (idx == 0)
 		d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
 
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index ef7d971031e..b6a475313c7 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -302,7 +302,7 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_
 			 d.name, pci_name(dev), dev->revision,
 			 amd_dma[fls(d.udma_mask) - 1]);
 
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 static const struct pci_device_id amd74xx_pci_tbl[] = {
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 8b637181681..b483a68b39f 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -167,7 +167,7 @@ static const struct ide_port_info atiixp_pci_info[] __devinitdata = {
 
 static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &atiixp_pci_info[id->driver_data]);
+	return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL);
 }
 
 static const struct pci_device_id atiixp_pci_tbl[] = {
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index ce58bfcdb3c..fc0333c9a4e 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -507,7 +507,7 @@ static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_devic
 		}
 	}
 
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 static const struct pci_device_id cmd64x_pci_tbl[] = {
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index f5534c1ff34..ba82bad8bf4 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -256,7 +256,7 @@ static const struct ide_port_info cs5530_chipset __devinitdata = {
 
 static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &cs5530_chipset);
+	return ide_pci_init_one(dev, &cs5530_chipset, NULL);
 }
 
 static const struct pci_device_id cs5530_pci_tbl[] = {
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 5404fe4f701..2161f43ca1b 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -180,7 +180,7 @@ static const struct ide_port_info cs5535_chipset __devinitdata = {
 static int __devinit cs5535_init_one(struct pci_dev *dev,
 					const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &cs5535_chipset);
+	return ide_pci_init_one(dev, &cs5535_chipset, NULL);
 }
 
 static const struct pci_device_id cs5535_pci_tbl[] = {
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index e14ad5530fa..abd27ed7c30 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -419,7 +419,7 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev
 	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
 	    PCI_FUNC(dev->devfn) == 1) {
 		dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
-		ret = ide_setup_pci_devices(dev, dev2, &cy82c693_chipset);
+		ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
 		/* We leak pci refs here but thats ok - we can't be unloaded */
 	}
 	return ret;
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 041720e2276..dd0caea5e4f 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -139,7 +139,7 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi
 			goto out;
 		}
 	}
-	ret = ide_setup_pci_device(dev, d);
+	ret = ide_pci_init_one(dev, d, NULL);
 out:
 	return ret;
 }
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index 9e1d1c4741d..3d70c5150ac 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -156,7 +156,7 @@ static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_devic
 
 	d = &hpt34x_chipsets[(pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0];
 
-	return ide_setup_pci_device(dev, d);
+	return ide_pci_init_one(dev, d, NULL);
 }
 
 static const struct pci_device_id hpt34x_pci_tbl[] = {
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 1f1135ce7cd..b23b7a27800 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1608,13 +1608,13 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
 				d.host_flags &= ~IDE_HFLAG_NON_BOOTABLE;
 		}
 
-		ret = ide_setup_pci_devices(dev, dev2, &d);
+		ret = ide_pci_init_two(dev, dev2, &d, NULL);
 		if (ret < 0)
 			pci_dev_put(dev2);
 		return ret;
 	}
 
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 2b71bdf74e7..18219fa9ef0 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -184,7 +184,7 @@ static const struct ide_port_info it8213_chipsets[] __devinitdata = {
 
 static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
+	return ide_pci_init_one(dev, &it8213_chipsets[id->driver_data], NULL);
 }
 
 static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index cbf64720299..40186f9e56a 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -664,7 +664,7 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic
 
 	pci_set_drvdata(dev, itdevs);
 
-	return ide_setup_pci_device(dev, &it821x_chipsets[id->driver_data]);
+	return ide_pci_init_one(dev, &it821x_chipsets[id->driver_data], NULL);
 }
 
 static const struct pci_device_id it821x_pci_tbl[] = {
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 96ef7394f28..a7e3c14f7b0 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -121,7 +121,7 @@ static const struct ide_port_info jmicron_chipset __devinitdata = {
 
 static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &jmicron_chipset);
+	return ide_pci_init_one(dev, &jmicron_chipset, NULL);
 }
 
 /* All JMB PATA controllers have and will continue to have the same
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index 5cd2b32ff0e..a45c33c0c79 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -324,7 +324,7 @@ static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_devi
 		d.tp_ops = &superio_tp_ops;
 	}
 #endif
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 725c80508d9..edb9132ffbe 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -209,7 +209,7 @@ static const struct ide_port_info opti621_chipset __devinitdata = {
 
 static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &opti621_chipset);
+	return ide_pci_init_one(dev, &opti621_chipset, NULL);
 }
 
 static const struct pci_device_id opti621_pci_tbl[] = {
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 070df8ab3b2..71a420feb98 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -524,7 +524,7 @@ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_de
 		dev2 = pdc20270_get_dev2(dev);
 
 		if (dev2) {
-			int ret = ide_setup_pci_devices(dev, dev2, d);
+			int ret = ide_pci_init_two(dev, dev2, d, NULL);
 			if (ret < 0)
 				pci_dev_put(dev2);
 			return ret;
@@ -540,7 +540,7 @@ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_de
 		return -ENODEV;
 	}
 
-	return ide_setup_pci_device(dev, d);
+	return ide_pci_init_one(dev, d, NULL);
 }
 
 static const struct pci_device_id pdc202new_pci_tbl[] = {
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index e54dc653b8c..eba1d60a73a 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -412,7 +412,7 @@ static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_dev
 		}
 	}
 
-	return ide_setup_pci_device(dev, d);
+	return ide_pci_init_one(dev, d, NULL);
 }
 
 static const struct pci_device_id pdc202xx_pci_tbl[] = {
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 0ce41b4ddda..359f65ddcbf 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -394,7 +394,7 @@ static const struct ide_port_info piix_pci_info[] __devinitdata = {
  
 static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &piix_pci_info[id->driver_data]);
+	return ide_pci_init_one(dev, &piix_pci_info[id->driver_data], NULL);
 }
 
 /**
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index 532154adba2..860ffdeca09 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -48,7 +48,7 @@ static const struct ide_port_info rz1000_chipset __devinitdata = {
 
 static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &rz1000_chipset);
+	return ide_pci_init_one(dev, &rz1000_chipset, NULL);
 }
 
 static const struct pci_device_id rz1000_pci_tbl[] = {
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 14c787b5d95..8fd9cc2119d 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -317,7 +317,7 @@ static const struct ide_port_info sc1200_chipset __devinitdata = {
 
 static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &sc1200_chipset);
+	return ide_pci_init_one(dev, &sc1200_chipset, NULL);
 }
 
 static const struct pci_device_id sc1200_pci_tbl[] = {
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 127ccb45e26..34abdfc8d56 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -422,7 +422,7 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device
 			d.host_flags &= ~IDE_HFLAG_SINGLE;
 	}
 
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 static const struct pci_device_id svwks_pci_tbl[] = {
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 5965a35d94a..48124133601 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -795,7 +795,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 		d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
 	}
 
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 static const struct pci_device_id siimage_pci_tbl[] = {
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 2389945ca95..a2330c4ac75 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -583,7 +583,7 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi
 
 	d.udma_mask = udma_rates[chipset_family];
 
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 static const struct pci_device_id sis5513_pci_tbl[] = {
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index f82a6502c1b..be22f8125d7 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -335,7 +335,7 @@ static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_dev
 		d.host_flags &= ~IDE_HFLAG_SERIALIZE_DMA;
 	}
 
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 static const struct pci_device_id sl82c105_pci_tbl[] = {
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index dae6e2c94d8..2fc2f2cf220 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -144,7 +144,7 @@ static const struct ide_port_info slc90e66_chipset __devinitdata = {
 
 static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &slc90e66_chipset);
+	return ide_pci_init_one(dev, &slc90e66_chipset, NULL);
 }
 
 static const struct pci_device_id slc90e66_pci_tbl[] = {
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 477e1979010..e16e79d2177 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -215,7 +215,7 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = {
 static int __devinit tc86c001_init_one(struct pci_dev *dev,
 				       const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &tc86c001_chipset);
+	return ide_pci_init_one(dev, &tc86c001_chipset, NULL);
 }
 
 static const struct pci_device_id tc86c001_pci_tbl[] = {
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index db65a558d4e..60dcb645d1b 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -104,7 +104,7 @@ static const struct ide_port_info triflex_device __devinitdata = {
 static int __devinit triflex_init_one(struct pci_dev *dev, 
 		const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &triflex_device);
+	return ide_pci_init_one(dev, &triflex_device, NULL);
 }
 
 static const struct pci_device_id triflex_pci_tbl[] = {
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index a8a3138682e..d8127b51a54 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -340,7 +340,7 @@ static const struct ide_port_info trm290_chipset __devinitdata = {
 
 static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &trm290_chipset);
+	return ide_pci_init_one(dev, &trm290_chipset, NULL);
 }
 
 static const struct pci_device_id trm290_pci_tbl[] = {
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 09dc4803ef9..2f22abfe003 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -466,7 +466,7 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 
 	d.udma_mask = via_config->udma_mask;
 
-	return ide_setup_pci_device(dev, &d);
+	return ide_pci_init_one(dev, &d, NULL);
 }
 
 static const struct pci_device_id via_pci_tbl[] = {
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index b85de71fdc8..ca17bf8896d 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -525,8 +525,10 @@ out:
 	return ret;
 }
 
-int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
+int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
+		     void *priv)
 {
+	struct ide_host *host;
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 	int ret;
 
@@ -536,6 +538,19 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 
 	ide_pci_setup_ports(dev, d, 0, &hw[0], &hws[0]);
 
+	host = ide_host_alloc(d, hws);
+	if (host == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	host->dev[0] = &dev->dev;
+
+	host->host_priv = priv;
+
+	if (priv)
+		pci_set_drvdata(dev, host);
+
 	ret = do_ide_setup_pci_device(dev, d, 1);
 	if (ret < 0)
 		goto out;
@@ -543,16 +558,19 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d)
 	/* fixup IRQ */
 	hw[1].irq = hw[0].irq = ret;
 
-	ret = ide_host_add(d, hws, NULL);
+	ret = ide_host_register(host, d, hws);
+	if (ret)
+		ide_host_free(host);
 out:
 	return ret;
 }
-EXPORT_SYMBOL_GPL(ide_setup_pci_device);
+EXPORT_SYMBOL_GPL(ide_pci_init_one);
 
-int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
-			  const struct ide_port_info *d)
+int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
+		     const struct ide_port_info *d, void *priv)
 {
 	struct pci_dev *pdev[] = { dev1, dev2 };
+	struct ide_host *host;
 	int ret, i;
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
@@ -562,7 +580,25 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 			goto out;
 
 		ide_pci_setup_ports(pdev[i], d, 0, &hw[i*2], &hws[i*2]);
+	}
 
+	host = ide_host_alloc(d, hws);
+	if (host == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	host->dev[0] = &dev1->dev;
+	host->dev[1] = &dev2->dev;
+
+	host->host_priv = priv;
+
+	if (priv) {
+		pci_set_drvdata(pdev[0], host);
+		pci_set_drvdata(pdev[1], host);
+	}
+
+	for (i = 0; i < 2; i++) {
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
 
 		/*
@@ -576,8 +612,10 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
 		hw[i*2 + 1].irq = hw[i*2].irq = ret;
 	}
 
-	ret = ide_host_add(d, hws, NULL);
+	ret = ide_host_register(host, d, hws);
+	if (ret)
+		ide_host_free(host);
 out:
 	return ret;
 }
-EXPORT_SYMBOL_GPL(ide_setup_pci_devices);
+EXPORT_SYMBOL_GPL(ide_pci_init_two);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index d67ccca2b96..776c574c964 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -626,6 +626,8 @@ typedef struct hwif_s {
 struct ide_host {
 	ide_hwif_t	*ports[MAX_HWIFS];
 	unsigned int	n_ports;
+	struct device	*dev[2];
+	void		*host_priv;
 };
 
 /*
@@ -1201,8 +1203,9 @@ struct ide_port_info {
 	u8			udma_mask;
 };
 
-int ide_setup_pci_device(struct pci_dev *, const struct ide_port_info *);
-int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, const struct ide_port_info *);
+int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
+int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
+		     const struct ide_port_info *, void *);
 
 void ide_map_sg(ide_drive_t *, struct request *);
 void ide_init_sg_cmd(ide_drive_t *, struct request *);
-- 
cgit v1.2.3


From 08da591e14cf87247ec09b17c350235157a92fc3 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:15 +0200
Subject: ide: add ide_device_{get,put}() helpers

* Add 'struct ide_host *host' field to ide_hwif_t and set it
  in ide_host_alloc_all().

* Add ide_device_{get,put}() helpers loosely based on SCSI's
  scsi_device_{get,put}() ones.

* Convert IDE device drivers to use ide_device_{get,put}().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c     | 12 +++++++++---
 drivers/ide/ide-disk.c   | 12 +++++++++---
 drivers/ide/ide-floppy.c | 12 +++++++++---
 drivers/ide/ide-probe.c  |  2 ++
 drivers/ide/ide-tape.c   | 12 +++++++++---
 drivers/ide/ide.c        | 47 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ide-scsi.c  |  8 +++++++-
 include/linux/ide.h      |  7 +++++++
 8 files changed, 99 insertions(+), 13 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 4e73aeee405..8f253e5f26a 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -57,23 +57,29 @@ static DEFINE_MUTEX(idecd_ref_mutex);
 #define ide_cd_g(disk) \
 	container_of((disk)->private_data, struct cdrom_info, driver)
 
+static void ide_cd_release(struct kref *);
+
 static struct cdrom_info *ide_cd_get(struct gendisk *disk)
 {
 	struct cdrom_info *cd = NULL;
 
 	mutex_lock(&idecd_ref_mutex);
 	cd = ide_cd_g(disk);
-	if (cd)
+	if (cd) {
 		kref_get(&cd->kref);
+		if (ide_device_get(cd->drive)) {
+			kref_put(&cd->kref, ide_cd_release);
+			cd = NULL;
+		}
+	}
 	mutex_unlock(&idecd_ref_mutex);
 	return cd;
 }
 
-static void ide_cd_release(struct kref *);
-
 static void ide_cd_put(struct cdrom_info *cd)
 {
 	mutex_lock(&idecd_ref_mutex);
+	ide_device_put(cd->drive);
 	kref_put(&cd->kref, ide_cd_release);
 	mutex_unlock(&idecd_ref_mutex);
 }
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index df5fe575687..28d85b410f7 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -56,23 +56,29 @@ static DEFINE_MUTEX(idedisk_ref_mutex);
 #define ide_disk_g(disk) \
 	container_of((disk)->private_data, struct ide_disk_obj, driver)
 
+static void ide_disk_release(struct kref *);
+
 static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
 {
 	struct ide_disk_obj *idkp = NULL;
 
 	mutex_lock(&idedisk_ref_mutex);
 	idkp = ide_disk_g(disk);
-	if (idkp)
+	if (idkp) {
 		kref_get(&idkp->kref);
+		if (ide_device_get(idkp->drive)) {
+			kref_put(&idkp->kref, ide_disk_release);
+			idkp = NULL;
+		}
+	}
 	mutex_unlock(&idedisk_ref_mutex);
 	return idkp;
 }
 
-static void ide_disk_release(struct kref *);
-
 static void ide_disk_put(struct ide_disk_obj *idkp)
 {
 	mutex_lock(&idedisk_ref_mutex);
+	ide_device_put(idkp->drive);
 	kref_put(&idkp->kref, ide_disk_release);
 	mutex_unlock(&idedisk_ref_mutex);
 }
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 3d8e6dd0f41..ca11a26746f 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -158,23 +158,29 @@ static DEFINE_MUTEX(idefloppy_ref_mutex);
 #define ide_floppy_g(disk) \
 	container_of((disk)->private_data, struct ide_floppy_obj, driver)
 
+static void idefloppy_cleanup_obj(struct kref *);
+
 static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
 {
 	struct ide_floppy_obj *floppy = NULL;
 
 	mutex_lock(&idefloppy_ref_mutex);
 	floppy = ide_floppy_g(disk);
-	if (floppy)
+	if (floppy) {
 		kref_get(&floppy->kref);
+		if (ide_device_get(floppy->drive)) {
+			kref_put(&floppy->kref, idefloppy_cleanup_obj);
+			floppy = NULL;
+		}
+	}
 	mutex_unlock(&idefloppy_ref_mutex);
 	return floppy;
 }
 
-static void idefloppy_cleanup_obj(struct kref *);
-
 static void ide_floppy_put(struct ide_floppy_obj *floppy)
 {
 	mutex_lock(&idefloppy_ref_mutex);
+	ide_device_put(floppy->drive);
 	kref_put(&floppy->kref, idefloppy_cleanup_obj);
 	mutex_unlock(&idefloppy_ref_mutex);
 }
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 890c15b1b3a..9ab5892eaea 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1595,6 +1595,8 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
 
 		ide_init_port_data(hwif, idx);
 
+		hwif->host = host;
+
 		host->ports[i] = hwif;
 		host->n_ports++;
 	}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 6962ca4891a..789f3428f07 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -322,23 +322,29 @@ static struct class *idetape_sysfs_class;
 #define ide_tape_g(disk) \
 	container_of((disk)->private_data, struct ide_tape_obj, driver)
 
+static void ide_tape_release(struct kref *);
+
 static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
 {
 	struct ide_tape_obj *tape = NULL;
 
 	mutex_lock(&idetape_ref_mutex);
 	tape = ide_tape_g(disk);
-	if (tape)
+	if (tape) {
 		kref_get(&tape->kref);
+		if (ide_device_get(tape->drive)) {
+			kref_put(&tape->kref, ide_tape_release);
+			tape = NULL;
+		}
+	}
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
 }
 
-static void ide_tape_release(struct kref *);
-
 static void ide_tape_put(struct ide_tape_obj *tape)
 {
 	mutex_lock(&idetape_ref_mutex);
+	ide_device_put(tape->drive);
 	kref_put(&tape->kref, ide_tape_release);
 	mutex_unlock(&idetape_ref_mutex);
 }
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 60f0ca66aa9..772451600e4 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -618,6 +618,53 @@ set_val:
 
 EXPORT_SYMBOL(generic_ide_ioctl);
 
+/**
+ * ide_device_get	-	get an additional reference to a ide_drive_t
+ * @drive:	device to get a reference to
+ *
+ * Gets a reference to the ide_drive_t and increments the use count of the
+ * underlying LLDD module.
+ */
+int ide_device_get(ide_drive_t *drive)
+{
+	struct device *host_dev;
+	struct module *module;
+
+	if (!get_device(&drive->gendev))
+		return -ENXIO;
+
+	host_dev = drive->hwif->host->dev[0];
+	module = host_dev ? host_dev->driver->owner : NULL;
+
+	if (module && !try_module_get(module)) {
+		put_device(&drive->gendev);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ide_device_get);
+
+/**
+ * ide_device_put	-	release a reference to a ide_drive_t
+ * @drive:	device to release a reference on
+ *
+ * Release a reference to the ide_drive_t and decrements the use count of
+ * the underlying LLDD module.
+ */
+void ide_device_put(ide_drive_t *drive)
+{
+#ifdef CONFIG_MODULE_UNLOAD
+	struct device *host_dev = drive->hwif->host->dev[0];
+	struct module *module = host_dev ? host_dev->driver->owner : NULL;
+
+	if (module)
+		module_put(module);
+#endif
+	put_device(&drive->gendev);
+}
+EXPORT_SYMBOL_GPL(ide_device_put);
+
 static int ide_bus_match(struct device *dev, struct device_driver *drv)
 {
 	return 1;
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 538552495d4..318ef382448 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -101,8 +101,13 @@ static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk)
 
 	mutex_lock(&idescsi_ref_mutex);
 	scsi = ide_scsi_g(disk);
-	if (scsi)
+	if (scsi) {
 		scsi_host_get(scsi->host);
+		if (ide_device_get(scsi->drive)) {
+			scsi_host_put(scsi->host);
+			scsi = NULL;
+		}
+	}
 	mutex_unlock(&idescsi_ref_mutex);
 	return scsi;
 }
@@ -110,6 +115,7 @@ static struct ide_scsi_obj *ide_scsi_get(struct gendisk *disk)
 static void ide_scsi_put(struct ide_scsi_obj *scsi)
 {
 	mutex_lock(&idescsi_ref_mutex);
+	ide_device_put(scsi->drive);
 	scsi_host_put(scsi->host);
 	mutex_unlock(&idescsi_ref_mutex);
 }
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 776c574c964..3eccac0a2a3 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -532,12 +532,16 @@ struct ide_dma_ops {
 	void	(*dma_timeout)(struct ide_drive_s *);
 };
 
+struct ide_host;
+
 typedef struct hwif_s {
 	struct hwif_s *next;		/* for linked-list in ide_hwgroup_t */
 	struct hwif_s *mate;		/* other hwif from same PCI chip */
 	struct hwgroup_s *hwgroup;	/* actually (ide_hwgroup_t *) */
 	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
 
+	struct ide_host *host;
+
 	char name[6];			/* name of interface, eg. "ide0" */
 
 	struct ide_io_ports	io_ports;
@@ -876,6 +880,9 @@ struct ide_driver_s {
 
 #define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
 
+int ide_device_get(ide_drive_t *);
+void ide_device_put(ide_drive_t *);
+
 int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
 
 extern int ide_vlb_clk;
-- 
cgit v1.2.3


From 60e57ed7c12917932a01d1679d92a7a8735afbce Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:15 +0200
Subject: aec62xx: convert to use ->host_priv

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/aec62xx.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 7a5d246fe9b..7ca7989bc35 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -59,10 +59,6 @@ static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
 	{	0,		0x00,	0x00	}
 };
 
-#define BUSCLOCK(D)	\
-	((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
-
-
 /*
  * TO DO: active tuning and correction of cards without a bios.
  */
@@ -88,6 +84,8 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
 	u16 d_conf		= 0;
 	u8 ultra = 0, ultra_conf = 0;
 	u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
@@ -96,7 +94,7 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
 	local_irq_save(flags);
 	/* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
 	pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
-	tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev));
+	tmp0 = pci_bus_clock_list(speed, bus_clock);
 	d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
 	pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
 
@@ -104,7 +102,7 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
 	tmp2 = 0x00;
 	pci_read_config_byte(dev, 0x54, &ultra);
 	tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
-	ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
+	ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
 	tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
 	pci_write_config_byte(dev, 0x54, tmp2);
 	local_irq_restore(flags);
@@ -114,6 +112,8 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
 	u8 unit		= (drive->select.b.unit & 0x01);
 	u8 tmp1 = 0, tmp2 = 0;
 	u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
@@ -122,12 +122,12 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
 	local_irq_save(flags);
 	/* high 4-bits: Active, low 4-bits: Recovery */
 	pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
-	drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev));
+	drive_conf = pci_bus_clock_list(speed, bus_clock);
 	pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
 
 	pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
 	tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
-	ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
+	ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
 	tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
 	pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
 	local_irq_restore(flags);
@@ -140,13 +140,6 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
 
 static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
 {
-	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-
-	if (bus_speed <= 33)
-		pci_set_drvdata(dev, (void *) aec6xxx_33_base);
-	else
-		pci_set_drvdata(dev, (void *) aec6xxx_34_base);
-
 	/* These are necessary to get AEC6280 Macintosh cards to work */
 	if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
 	    (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
@@ -254,10 +247,17 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 
 static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	const struct chipset_bus_clock_list_entry *bus_clock;
 	struct ide_port_info d;
 	u8 idx = id->driver_data;
+	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 	int err;
 
+	if (bus_speed <= 33)
+		bus_clock = aec6xxx_33_base;
+	else
+		bus_clock = aec6xxx_34_base;
+
 	err = pci_enable_device(dev);
 	if (err)
 		return err;
@@ -273,7 +273,7 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
 		}
 	}
 
-	err = ide_pci_init_one(dev, &d, NULL);
+	err = ide_pci_init_one(dev, &d, (void *)bus_clock);
 	if (err)
 		pci_disable_device(dev);
 
-- 
cgit v1.2.3


From 74811f355f4f69a187fa74892dcf2a684b84ce99 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:15 +0200
Subject: hpt366: convert to use ->host_priv

While at it:

* Allocate both struct hpt_info instances at once.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt366.c | 72 +++++++++++++++++++++++++++---------------------
 1 file changed, 41 insertions(+), 31 deletions(-)

diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index b23b7a27800..8f29571345a 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -620,7 +620,8 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct hpt_info *info	= pci_get_drvdata(dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
 	u8 mask 		= hwif->ultra_mask;
 
 	switch (info->chip_type) {
@@ -660,7 +661,8 @@ static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct hpt_info *info	= pci_get_drvdata(dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
 
 	switch (info->chip_type) {
 	case HPT372 :
@@ -694,8 +696,10 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
 
 static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
 {
-	struct pci_dev  *dev	= to_pci_dev(drive->hwif->dev);
-	struct hpt_info	*info	= pci_get_drvdata(dev);
+	ide_hwif_t *hwif	= drive->hwif;
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
 	struct hpt_timings *t	= info->timings;
 	u8  itr_addr		= 0x40 + (drive->dn * 4);
 	u32 old_itr		= 0;
@@ -738,7 +742,8 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
-	struct hpt_info *info	= pci_get_drvdata(dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
 
 	if (drive->quirk_list) {
 		if (info->chip_type >= HPT370) {
@@ -965,22 +970,13 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
 
 static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name)
 {
-	struct hpt_info *info	= kmalloc(sizeof(struct hpt_info), GFP_KERNEL);
 	unsigned long io_base	= pci_resource_start(dev, 4);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	struct hpt_info *info	= host->host_priv + (&dev->dev == host->dev[1]);
 	u8 pci_clk,  dpll_clk	= 0;	/* PCI and DPLL clock in MHz */
 	u8 chip_type;
 	enum ata_clock	clock;
 
-	if (info == NULL) {
-		printk(KERN_ERR "%s: out of memory!\n", name);
-		return -ENOMEM;
-	}
-
-	/*
-	 * Copy everything from a static "template" structure
-	 * to just allocated per-chip hpt_info structure.
-	 */
-	memcpy(info, pci_get_drvdata(dev), sizeof(struct hpt_info));
 	chip_type = info->chip_type;
 
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
@@ -1142,7 +1138,6 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 
 		if (info->timings->clock_table[clock] == NULL) {
 			printk(KERN_ERR "%s: unknown bus timing!\n", name);
-			kfree(info);
 			return -EIO;
 		}
 
@@ -1169,7 +1164,6 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 		}
 		if (adjust == 8) {
 			printk(KERN_ERR "%s: DPLL did not stabilize!\n", name);
-			kfree(info);
 			return -EIO;
 		}
 
@@ -1186,9 +1180,6 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 	info->pci_clk	= pci_clk;
 	info->clock	= clock;
 
-	/* Point to this chip's own instance of the hpt_info structure. */
-	pci_set_drvdata(dev, info);
-
 	if (chip_type >= HPT370) {
 		u8  mcr1, mcr4;
 
@@ -1218,7 +1209,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
-	struct hpt_info *info	= pci_get_drvdata(dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
 	u8 chip_type		= info->chip_type;
 	u8 scr1 = 0, ata66	= hwif->channel ? 0x01 : 0x02;
 
@@ -1262,7 +1254,8 @@ static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
 static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	struct hpt_info *info	= pci_get_drvdata(dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	struct hpt_info *info	= host->host_priv + (hwif->dev == host->dev[1]);
 	int serialize		= HPT_SERIALIZE_IO;
 	u8  chip_type		= info->chip_type;
 	u8  new_mcr, old_mcr	= 0;
@@ -1542,10 +1535,12 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
 static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	const struct hpt_info *info = NULL;
+	struct hpt_info *dyn_info;
 	struct pci_dev *dev2 = NULL;
 	struct ide_port_info d;
 	u8 idx = id->driver_data;
 	u8 rev = dev->revision;
+	int ret;
 
 	if ((idx == 0 || idx == 4) && (PCI_FUNC(dev->devfn) & 1))
 		return -ENODEV;
@@ -1591,15 +1586,24 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
 	if (info == &hpt370 || info == &hpt370a)
 		d.dma_ops = &hpt370_dma_ops;
 
-	pci_set_drvdata(dev, (void *)info);
-
 	if (info == &hpt36x || info == &hpt374)
 		dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
 
-	if (dev2) {
-		int ret;
+	dyn_info = kzalloc(sizeof(*dyn_info) * (dev2 ? 2 : 1), GFP_KERNEL);
+	if (dyn_info == NULL) {
+		printk(KERN_ERR "%s: out of memory!\n", d.name);
+		pci_dev_put(dev2);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Copy everything from a static "template" structure
+	 * to just allocated per-chip hpt_info structure.
+	 */
+	memcpy(dyn_info, info, sizeof(*dyn_info));
 
-		pci_set_drvdata(dev2, (void *)info);
+	if (dev2) {
+		memcpy(dyn_info + 1, info, sizeof(*dyn_info));
 
 		if (info == &hpt374)
 			hpt374_init(dev, dev2);
@@ -1608,13 +1612,19 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
 				d.host_flags &= ~IDE_HFLAG_NON_BOOTABLE;
 		}
 
-		ret = ide_pci_init_two(dev, dev2, &d, NULL);
-		if (ret < 0)
+		ret = ide_pci_init_two(dev, dev2, &d, dyn_info);
+		if (ret < 0) {
 			pci_dev_put(dev2);
+			kfree(dyn_info);
+		}
 		return ret;
 	}
 
-	return ide_pci_init_one(dev, &d, NULL);
+	ret = ide_pci_init_one(dev, &d, dyn_info);
+	if (ret < 0)
+		kfree(dyn_info);
+
+	return ret;
 }
 
 static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
-- 
cgit v1.2.3


From 1d76d9dc448d5a6fc7b49ba06c634aa6927bcc3d Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:16 +0200
Subject: it821x: convert to use ->host_priv

While at it:

* Allocate both struct it821x_dev instances at once.

* Don't leak itdevs on ide_pci_init_one() failure.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/it821x.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 40186f9e56a..e63fdafe18f 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -534,8 +534,9 @@ static struct ide_dma_ops it821x_pass_through_dma_ops = {
 static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct it821x_dev **itdevs = (struct it821x_dev **)pci_get_drvdata(dev);
-	struct it821x_dev *idev = itdevs[hwif->channel];
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct it821x_dev *itdevs = host->host_priv;
+	struct it821x_dev *idev = itdevs + hwif->channel;
 	u8 conf;
 
 	ide_set_hwifdata(hwif, idev);
@@ -648,23 +649,20 @@ static const struct ide_port_info it821x_chipsets[] __devinitdata = {
 
 static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	struct it821x_dev *itdevs[2] = { NULL, NULL} , *itdev;
-	unsigned int i;
-
-	for (i = 0; i < 2; i++) {
-		itdev = kzalloc(sizeof(*itdev), GFP_KERNEL);
-		if (itdev == NULL) {
-			kfree(itdevs[0]);
-			printk(KERN_ERR "it821x: out of memory\n");
-			return -ENOMEM;
-		}
+	struct it821x_dev *itdevs;
+	int rc;
 
-		itdevs[i] = itdev;
+	itdevs = kzalloc(2 * sizeof(*itdevs), GFP_KERNEL);
+	if (itdevs == NULL) {
+		printk(KERN_ERR "it821x: out of memory\n");
+		return -ENOMEM;
 	}
 
-	pci_set_drvdata(dev, itdevs);
+	rc = ide_pci_init_one(dev, &it821x_chipsets[id->driver_data], itdevs);
+	if (rc)
+		kfree(itdevs);
 
-	return ide_pci_init_one(dev, &it821x_chipsets[id->driver_data], NULL);
+	return rc;
 }
 
 static const struct pci_device_id it821x_pci_tbl[] = {
-- 
cgit v1.2.3


From 96776f3b57eb7beb889a4368937cc9d74082a47e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:16 +0200
Subject: sc1200: convert to use ->host_priv

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/sc1200.c | 39 +++++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 20 deletions(-)

diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 8fd9cc2119d..fa2ce76837d 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -234,20 +234,10 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
 	 * we only save state when going from full power to less
 	 */
 	if (state.event == PM_EVENT_ON) {
-		struct sc1200_saved_state *ss;
+		struct ide_host *host = pci_get_drvdata(dev);
+		struct sc1200_saved_state *ss = host->host_priv;
 		unsigned int r;
 
-		/*
-		 * allocate a permanent save area, if not already allocated
-		 */
-		ss = (struct sc1200_saved_state *)pci_get_drvdata(dev);
-		if (ss == NULL) {
-			ss = kmalloc(sizeof(*ss), GFP_KERNEL);
-			if (ss == NULL)
-				return -ENOMEM;
-			pci_set_drvdata(dev, ss);
-		}
-
 		/*
 		 * save timing registers
 		 * (this may be unnecessary if BIOS also does it)
@@ -263,7 +253,8 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
 
 static int sc1200_resume (struct pci_dev *dev)
 {
-	struct sc1200_saved_state *ss;
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct sc1200_saved_state *ss = host->host_priv;
 	unsigned int r;
 	int i;
 
@@ -271,16 +262,12 @@ static int sc1200_resume (struct pci_dev *dev)
 	if (i)
 		return i;
 
-	ss = (struct sc1200_saved_state *)pci_get_drvdata(dev);
-
 	/*
 	 * restore timing registers
 	 * (this may be unnecessary if BIOS also does it)
 	 */
-	if (ss) {
-		for (r = 0; r < 8; r++)
-			pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]);
-	}
+	for (r = 0; r < 8; r++)
+		pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]);
 
 	return 0;
 }
@@ -317,7 +304,19 @@ static const struct ide_port_info sc1200_chipset __devinitdata = {
 
 static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_pci_init_one(dev, &sc1200_chipset, NULL);
+	struct sc1200_saved_state *ss = NULL;
+	int rc;
+
+#ifdef CONFIG_PM
+	ss = kmalloc(sizeof(*ss), GFP_KERNEL);
+	if (ss == NULL)
+		return -ENOMEM;
+#endif
+	rc = ide_pci_init_one(dev, &sc1200_chipset, ss);
+	if (rc)
+		kfree(ss);
+
+	return rc;
 }
 
 static const struct pci_device_id sc1200_pci_tbl[] = {
-- 
cgit v1.2.3


From 4c674235d667d7ddc6b0c95a228a507eb94da2d6 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:16 +0200
Subject: siimage: convert to use ->host_priv

While at it:

* Reserve PCI BAR 5 in siimage_init_one() and remove no longer needed
  setup_mmio_siimage().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/siimage.c | 114 +++++++++++++++++++++++-----------------------
 1 file changed, 58 insertions(+), 56 deletions(-)

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 48124133601..1388ffa9764 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -127,9 +127,10 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
 
 static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
 {
+	struct ide_host *host = pci_get_drvdata(dev);
 	u8 tmp = 0;
 
-	if (pci_get_drvdata(dev))
+	if (host->host_priv)
 		tmp = readb((void __iomem *)addr);
 	else
 		pci_read_config_byte(dev, addr, &tmp);
@@ -139,9 +140,10 @@ static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
 
 static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
 {
+	struct ide_host *host = pci_get_drvdata(dev);
 	u16 tmp = 0;
 
-	if (pci_get_drvdata(dev))
+	if (host->host_priv)
 		tmp = readw((void __iomem *)addr);
 	else
 		pci_read_config_word(dev, addr, &tmp);
@@ -151,7 +153,9 @@ static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
 
 static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
 {
-	if (pci_get_drvdata(dev))
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	if (host->host_priv)
 		writeb(val, (void __iomem *)addr);
 	else
 		pci_write_config_byte(dev, addr, val);
@@ -159,7 +163,9 @@ static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
 
 static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
 {
-	if (pci_get_drvdata(dev))
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	if (host->host_priv)
 		writew(val, (void __iomem *)addr);
 	else
 		pci_write_config_word(dev, addr, val);
@@ -167,7 +173,9 @@ static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
 
 static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
 {
-	if (pci_get_drvdata(dev))
+	struct ide_host *host = pci_get_drvdata(dev);
+
+	if (host->host_priv)
 		writel(val, (void __iomem *)addr);
 	else
 		pci_write_config_dword(dev, addr, val);
@@ -444,44 +452,6 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
 	}
 }
 
-/**
- *	setup_mmio_siimage	-	switch controller into MMIO mode
- *	@dev: PCI device we are configuring
- *	@name: device name
- *
- *	Attempt to put the device into MMIO mode. There are some slight
- *	complications here with certain systems where the MMIO BAR isn't
- *	mapped, so we have to be sure that we can fall back to I/O.
- */
-
-static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name)
-{
-	resource_size_t bar5	= pci_resource_start(dev, 5);
-	unsigned long barsize	= pci_resource_len(dev, 5);
-	void __iomem *ioaddr;
-
-	/*
-	 *	Drop back to PIO if we can't map the MMIO. Some	systems
-	 *	seem to get terminally confused in the PCI spaces.
-	 */
-	if (!request_mem_region(bar5, barsize, name)) {
-		printk(KERN_WARNING "siimage: IDE controller MMIO ports not "
-				    "available.\n");
-		return 0;
-	}
-
-	ioaddr = ioremap(bar5, barsize);
-	if (ioaddr == NULL) {
-		release_mem_region(bar5, barsize);
-		return 0;
-	}
-
-	pci_set_master(dev);
-	pci_set_drvdata(dev, (void *) ioaddr);
-
-	return 1;
-}
-
 /**
  *	init_chipset_siimage	-	set up an SI device
  *	@dev: PCI device
@@ -494,17 +464,15 @@ static unsigned int setup_mmio_siimage(struct pci_dev *dev, const char *name)
 static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
 						   const char *name)
 {
+	struct ide_host *host = pci_get_drvdata(dev);
+	void __iomem *ioaddr = host->host_priv;
 	unsigned long base, scsc_addr;
-	void __iomem *ioaddr = NULL;
-	u8 rev = dev->revision, tmp, BA5_EN;
+	u8 rev = dev->revision, tmp;
 
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
 
-	pci_read_config_byte(dev, 0x8A, &BA5_EN);
-
-	if ((BA5_EN & 0x01) || pci_resource_start(dev, 5))
-		if (setup_mmio_siimage(dev, name))
-			ioaddr = pci_get_drvdata(dev);
+	if (ioaddr)
+		pci_set_master(dev);
 
 	base = (unsigned long)ioaddr;
 
@@ -592,7 +560,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
 static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	void *addr		= pci_get_drvdata(dev);
+	struct ide_host *host	= pci_get_drvdata(dev);
+	void *addr		= host->host_priv;
 	u8 ch			= hwif->channel;
 	struct ide_io_ports *io_ports = &hwif->io_ports;
 	unsigned long base;
@@ -691,16 +660,15 @@ static void __devinit sil_quirkproc(ide_drive_t *drive)
 static void __devinit init_iops_siimage(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	struct ide_host *host = pci_get_drvdata(dev);
 
 	hwif->hwif_data = NULL;
 
 	/* Pessimal until we finish probing */
 	hwif->rqsize = 15;
 
-	if (pci_get_drvdata(dev) == NULL)
-		return;
-
-	init_mmio_iops_siimage(hwif);
+	if (host->host_priv)
+		init_mmio_iops_siimage(hwif);
 }
 
 /**
@@ -778,8 +746,13 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = {
 static int __devinit siimage_init_one(struct pci_dev *dev,
 				      const struct pci_device_id *id)
 {
+	void __iomem *ioaddr = NULL;
+	resource_size_t bar5 = pci_resource_start(dev, 5);
+	unsigned long barsize = pci_resource_len(dev, 5);
+	int rc;
 	struct ide_port_info d;
 	u8 idx = id->driver_data;
+	u8 BA5_EN;
 
 	d = siimage_chipsets[idx];
 
@@ -795,7 +768,36 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 		d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
 	}
 
-	return ide_pci_init_one(dev, &d, NULL);
+	rc = pci_enable_device(dev);
+	if (rc)
+		return rc;
+
+	pci_read_config_byte(dev, 0x8A, &BA5_EN);
+	if ((BA5_EN & 0x01) || bar5) {
+		/*
+		* Drop back to PIO if we can't map the MMIO. Some systems
+		* seem to get terminally confused in the PCI spaces.
+		*/
+		if (!request_mem_region(bar5, barsize, d.name)) {
+			printk(KERN_WARNING "siimage: IDE controller MMIO "
+					    "ports not available.\n");
+		} else {
+			ioaddr = ioremap(bar5, barsize);
+			if (ioaddr == NULL)
+				release_mem_region(bar5, barsize);
+		}
+	}
+
+	rc = ide_pci_init_one(dev, &d, ioaddr);
+	if (rc) {
+		if (ioaddr) {
+			iounmap(ioaddr);
+			release_mem_region(bar5, barsize);
+		}
+		pci_disable_device(dev);
+	}
+
+	return rc;
 }
 
 static const struct pci_device_id siimage_pci_tbl[] = {
-- 
cgit v1.2.3


From ee77325b074a73694b66ec9eca4f7e55dad58b84 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:17 +0200
Subject: via82cxxx: convert to use ->host_priv

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/via82cxxx.c | 33 +++++++++++++++++++++------------
 1 file changed, 21 insertions(+), 12 deletions(-)

diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 2f22abfe003..a8c050b462b 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -113,7 +113,8 @@ struct via82cxxx_dev
 static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct via82cxxx_dev *vdev = pci_get_drvdata(dev);
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct via82cxxx_dev *vdev = host->host_priv;
 	u8 t;
 
 	if (~vdev->via_config->flags & VIA_BAD_AST) {
@@ -153,7 +154,8 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed)
 	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct via82cxxx_dev *vdev = pci_get_drvdata(dev);
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct via82cxxx_dev *vdev = host->host_priv;
 	struct ide_timing t, p;
 	unsigned int T, UT;
 
@@ -266,19 +268,13 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
 
 static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
 {
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct via82cxxx_dev *vdev = host->host_priv;
 	struct pci_dev *isa = NULL;
-	struct via82cxxx_dev *vdev;
 	struct via_isa_bridge *via_config;
 	u8 t, v;
 	u32 u;
 
-	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
-	if (!vdev) {
-		printk(KERN_ERR "VP_IDE: out of memory :(\n");
-		return -ENOMEM;
-	}
-	pci_set_drvdata(dev, vdev);
-
 	/*
 	 * Find the ISA bridge to see how good the IDE is.
 	 */
@@ -402,7 +398,8 @@ static int via_cable_override(struct pci_dev *pdev)
 static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	struct via82cxxx_dev *vdev = pci_get_drvdata(pdev);
+	struct ide_host *host = pci_get_drvdata(pdev);
+	struct via82cxxx_dev *vdev = host->host_priv;
 
 	if (via_cable_override(pdev))
 		return ATA_CBL_PATA40_SHORT;
@@ -436,6 +433,8 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 {
 	struct pci_dev *isa = NULL;
 	struct via_isa_bridge *via_config;
+	struct via82cxxx_dev *vdev;
+	int rc;
 	u8 idx = id->driver_data;
 	struct ide_port_info d;
 
@@ -466,7 +465,17 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 
 	d.udma_mask = via_config->udma_mask;
 
-	return ide_pci_init_one(dev, &d, NULL);
+	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
+	if (!vdev) {
+		printk(KERN_ERR "VP_IDE: out of memory :(\n");
+		return -ENOMEM;
+	}
+
+	rc = ide_pci_init_one(dev, &d, vdev);
+	if (rc)
+		kfree(vdev);
+
+	return rc;
 }
 
 static const struct pci_device_id via_pci_tbl[] = {
-- 
cgit v1.2.3


From b16040b14e766d390138b04c8829c816f4c1d95b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:17 +0200
Subject: tc86c001: remove ->init_chipset method

* Reserve PCI BAR 5 in tc86c001_init_one() and remove no longer needed
  init_chipset_tc86c001().

While at it:

* Add & use DRV_NAME define.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/tc86c001.c | 38 ++++++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 12 deletions(-)

diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index e16e79d2177..bb329219935 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -11,6 +11,8 @@
 #include <linux/pci.h>
 #include <linux/ide.h>
 
+#define DRV_NAME "TC86C001"
+
 static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
@@ -173,16 +175,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
 	hwif->rqsize	 = 0xffff;
 }
 
-static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
-							const char *name)
-{
-	int err = pci_request_region(dev, 5, name);
-
-	if (err)
-		printk(KERN_ERR "%s: system control regs already in use", name);
-	return err;
-}
-
 static const struct ide_port_ops tc86c001_port_ops = {
 	.set_pio_mode		= tc86c001_set_pio_mode,
 	.set_dma_mode		= tc86c001_set_mode,
@@ -202,7 +194,6 @@ static const struct ide_dma_ops tc86c001_dma_ops = {
 
 static const struct ide_port_info tc86c001_chipset __devinitdata = {
 	.name		= "TC86C001",
-	.init_chipset	= init_chipset_tc86c001,
 	.init_hwif	= init_hwif_tc86c001,
 	.port_ops	= &tc86c001_port_ops,
 	.dma_ops	= &tc86c001_dma_ops,
@@ -215,7 +206,30 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = {
 static int __devinit tc86c001_init_one(struct pci_dev *dev,
 				       const struct pci_device_id *id)
 {
-	return ide_pci_init_one(dev, &tc86c001_chipset, NULL);
+	int rc;
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		goto out;
+
+	rc = pci_request_region(dev, 5, DRV_NAME);
+	if (rc) {
+		printk(KERN_ERR DRV_NAME ": system control regs already in use");
+		goto out_disable;
+	}
+
+	rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
+	if (rc)
+		goto out_release;
+
+	goto out;
+
+out_release:
+	pci_release_region(dev, 5);
+out_disable:
+	pci_disable_device(dev);
+out:
+	return rc;
 }
 
 static const struct pci_device_id tc86c001_pci_tbl[] = {
-- 
cgit v1.2.3


From d51f19c86583ca70468883d8137a92689f1a80c1 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:17 +0200
Subject: amd74xx: cleanup ->init_chipset method

Move amd_clock setup from init_chipset_amd74xx() to amd74xx_probe().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/amd74xx.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index b6a475313c7..5115d448ff8 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -173,24 +173,6 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
 		t |= 0xf0;
 	pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
 
-/*
- * Determine the system bus clock.
- */
-
-	amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
-
-	switch (amd_clock) {
-		case 33000: amd_clock = 33333; break;
-		case 37000: amd_clock = 37500; break;
-		case 41000: amd_clock = 41666; break;
-	}
-
-	if (amd_clock < 20000 || amd_clock > 50000) {
-		printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n",
-				    name, amd_clock);
-		amd_clock = 33333;
-	}
-
 	return dev->irq;
 }
 
@@ -302,6 +284,24 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_
 			 d.name, pci_name(dev), dev->revision,
 			 amd_dma[fls(d.udma_mask) - 1]);
 
+	/*
+	* Determine the system bus clock.
+	*/
+	amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
+
+	switch (amd_clock) {
+	case 33000: amd_clock = 33333; break;
+	case 37000: amd_clock = 37500; break;
+	case 41000: amd_clock = 41666; break;
+	}
+
+	if (amd_clock < 20000 || amd_clock > 50000) {
+		printk(KERN_WARNING "%s: User given PCI clock speed impossible"
+				    " (%d), using 33 MHz instead.\n",
+				    d.name, amd_clock);
+		amd_clock = 33333;
+	}
+
 	return ide_pci_init_one(dev, &d, NULL);
 }
 
-- 
cgit v1.2.3


From 0794230fd4b1bf61af8aabd7e987a595d6dbc430 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:17 +0200
Subject: cmd64x: cleanup ->init_chipset method

Remove verbose reporting for CMD646 (PCI device revision is always
logged by IDE PCI layer).

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/cmd64x.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index fc0333c9a4e..4eebcf09e0d 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -334,24 +334,6 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha
 {
 	u8 mrdmode = 0;
 
-	if (dev->device == PCI_DEVICE_ID_CMD_646) {
-
-		switch (dev->revision) {
-		case 0x07:
-		case 0x05:
-			printk("%s: UltraDMA capable\n", name);
-			break;
-		case 0x03:
-		default:
-			printk("%s: MultiWord DMA force limited\n", name);
-			break;
-		case 0x01:
-			printk("%s: MultiWord DMA limited, "
-			       "IRQ workaround enabled\n", name);
-			break;
-		}
-	}
-
 	/* Set a good latency timer and cache line size value. */
 	(void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
 	/* FIXME: pci_set_master() to ensure a good latency timer value */
-- 
cgit v1.2.3


From 37525bebcfc15a1fe5a9cb50bf49b21bf43559c1 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:18 +0200
Subject: via82cxxx: cleanup ->init_chipset method

* Move the boot message and via_clock setup from
  init_chipset_via82cxxx() to via_init_one().

* Set vdev->via_config in via_init_one() and cleanup
  init_chipset_via82cxxx() accordingly.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/via82cxxx.c | 81 ++++++++++++++++++++-------------------------
 1 file changed, 35 insertions(+), 46 deletions(-)

diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index a8c050b462b..bc1675da37d 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -270,21 +270,10 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
 {
 	struct ide_host *host = pci_get_drvdata(dev);
 	struct via82cxxx_dev *vdev = host->host_priv;
-	struct pci_dev *isa = NULL;
-	struct via_isa_bridge *via_config;
+	struct via_isa_bridge *via_config = vdev->via_config;
 	u8 t, v;
 	u32 u;
 
-	/*
-	 * Find the ISA bridge to see how good the IDE is.
-	 */
-	vdev->via_config = via_config = via_config_find(&isa);
-
-	/* We checked this earlier so if it fails here deeep badness
-	   is involved */
-
-	BUG_ON(!via_config->id);
-
 	/*
 	 * Detect cable and configure Clk66
 	 */
@@ -330,39 +319,6 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
 
 	pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
 
-	/*
-	 * Determine system bus clock.
-	 */
-
-	via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
-
-	switch (via_clock) {
-		case 33000: via_clock = 33333; break;
-		case 37000: via_clock = 37500; break;
-		case 41000: via_clock = 41666; break;
-	}
-
-	if (via_clock < 20000 || via_clock > 50000) {
-		printk(KERN_WARNING "VP_IDE: User given PCI clock speed "
-			"impossible (%d), using 33 MHz instead.\n", via_clock);
-		printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want "
-			"to assume 80-wire cable.\n");
-		via_clock = 33333;
-	}
-
-	/*
-	 * Print the boot message.
-	 */
-
-	printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
-		"controller on pci%s\n",
-		via_config->name, isa->revision,
-		via_config->udma_mask ? "U" : "MW",
-		via_dma[via_config->udma_mask ?
-			(fls(via_config->udma_mask) - 1) : 0],
-		pci_name(dev));
-
-	pci_dev_put(isa);
 	return 0;
 }
 
@@ -444,12 +400,43 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 	 * Find the ISA bridge and check we know what it is.
 	 */
 	via_config = via_config_find(&isa);
-	pci_dev_put(isa);
 	if (!via_config->id) {
 		printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
 		return -ENODEV;
 	}
 
+	/*
+	 * Print the boot message.
+	 */
+	printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
+		"controller on pci%s\n",
+		via_config->name, isa->revision,
+		via_config->udma_mask ? "U" : "MW",
+		via_dma[via_config->udma_mask ?
+			(fls(via_config->udma_mask) - 1) : 0],
+		pci_name(dev));
+
+	pci_dev_put(isa);
+
+	/*
+	 * Determine system bus clock.
+	 */
+	via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
+
+	switch (via_clock) {
+	case 33000: via_clock = 33333; break;
+	case 37000: via_clock = 37500; break;
+	case 41000: via_clock = 41666; break;
+	}
+
+	if (via_clock < 20000 || via_clock > 50000) {
+		printk(KERN_WARNING "VP_IDE: User given PCI clock speed "
+			"impossible (%d), using 33 MHz instead.\n", via_clock);
+		printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want "
+			"to assume 80-wire cable.\n");
+		via_clock = 33333;
+	}
+
 	if (idx == 0)
 		d.host_flags |= IDE_HFLAG_NO_AUTODMA;
 	else
@@ -471,6 +458,8 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 		return -ENOMEM;
 	}
 
+	vdev->via_config = via_config;
+
 	rc = ide_pci_init_one(dev, &d, vdev);
 	if (rc)
 		kfree(vdev);
-- 
cgit v1.2.3


From ef0b04276d8f719d754c092434fbd62c2aeb5307 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:19 +0200
Subject: ide: add ide_pci_remove() helper

* Add 'unsigned long host_flags' field to struct ide_host.

* Set ->host_flags in ide_host_alloc_all().

* Always set PCI dev's ->driver_data in ide_pci_init_{one,two}().

* Add ide_pci_remove() helper (the default implementation for
  struct pci_driver's ->remove method).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c |  3 +++
 drivers/ide/setup-pci.c | 39 +++++++++++++++++++++++++++++++++------
 include/linux/ide.h     |  2 ++
 3 files changed, 38 insertions(+), 6 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 9ab5892eaea..f0c162488ec 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1609,6 +1609,9 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
 	if (hws[0])
 		host->dev[0] = hws[0]->dev;
 
+	if (d)
+		host->host_flags = d->host_flags;
+
 	return host;
 }
 EXPORT_SYMBOL_GPL(ide_host_alloc_all);
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index ca17bf8896d..20f0ee00469 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -548,8 +548,7 @@ int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d,
 
 	host->host_priv = priv;
 
-	if (priv)
-		pci_set_drvdata(dev, host);
+	pci_set_drvdata(dev, host);
 
 	ret = do_ide_setup_pci_device(dev, d, 1);
 	if (ret < 0)
@@ -593,10 +592,8 @@ int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2,
 
 	host->host_priv = priv;
 
-	if (priv) {
-		pci_set_drvdata(pdev[0], host);
-		pci_set_drvdata(pdev[1], host);
-	}
+	pci_set_drvdata(pdev[0], host);
+	pci_set_drvdata(pdev[1], host);
 
 	for (i = 0; i < 2; i++) {
 		ret = do_ide_setup_pci_device(pdev[i], d, !i);
@@ -619,3 +616,33 @@ out:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(ide_pci_init_two);
+
+void ide_pci_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+	int bars;
+
+	if (host->host_flags & IDE_HFLAG_SINGLE)
+		bars = (1 << 2) - 1;
+	else
+		bars = (1 << 4) - 1;
+
+	if ((host->host_flags & IDE_HFLAG_NO_DMA) == 0) {
+		if (host->host_flags & IDE_HFLAG_CS5520)
+			bars |= (1 << 2);
+		else
+			bars |= (1 << 4);
+	}
+
+	ide_host_remove(host);
+
+	if (dev2)
+		pci_release_selected_regions(dev2, bars);
+	pci_release_selected_regions(dev, bars);
+
+	if (dev2)
+		pci_disable_device(dev2);
+	pci_disable_device(dev);
+}
+EXPORT_SYMBOL_GPL(ide_pci_remove);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 3eccac0a2a3..dbd0aeb3a56 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -631,6 +631,7 @@ struct ide_host {
 	ide_hwif_t	*ports[MAX_HWIFS];
 	unsigned int	n_ports;
 	struct device	*dev[2];
+	unsigned long	host_flags;
 	void		*host_priv;
 };
 
@@ -1213,6 +1214,7 @@ struct ide_port_info {
 int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
 int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
 		     const struct ide_port_info *, void *);
+void ide_pci_remove(struct pci_dev *);
 
 void ide_map_sg(ide_drive_t *, struct request *);
 void ide_init_sg_cmd(ide_drive_t *, struct request *);
-- 
cgit v1.2.3


From eb7cb98b1cc8be1d4395d9accf49ae3924cd68f1 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:19 +0200
Subject: aec62xx: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/aec62xx.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 7ca7989bc35..253299961a1 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -280,6 +280,12 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
 	return err;
 }
 
+static void __devexit aec62xx_remove(struct pci_dev *dev)
+{
+	ide_pci_remove(dev);
+	pci_disable_device(dev);
+}
+
 static const struct pci_device_id aec62xx_pci_tbl[] = {
 	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
 	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860),   1 },
@@ -294,6 +300,7 @@ static struct pci_driver driver = {
 	.name		= "AEC62xx_IDE",
 	.id_table	= aec62xx_pci_tbl,
 	.probe		= aec62xx_init_one,
+	.remove		= aec62xx_remove,
 };
 
 static int __init aec62xx_ide_init(void)
@@ -301,7 +308,13 @@ static int __init aec62xx_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit aec62xx_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(aec62xx_ide_init);
+module_exit(aec62xx_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
-- 
cgit v1.2.3


From 8ee3f3b69d9c37f86a45862f53451699ec77fe12 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:19 +0200
Subject: alim15x3: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/alim15x3.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 7f96e7ca386..ac171502b99 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -580,6 +580,7 @@ static struct pci_driver driver = {
 	.name		= "ALI15x3_IDE",
 	.id_table	= alim15x3_pci_tbl,
 	.probe		= alim15x3_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init ali15x3_ide_init(void)
@@ -587,7 +588,13 @@ static int __init ali15x3_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit ali15x3_ide_exit(void)
+{
+	return pci_unregister_driver(&driver);
+}
+
 module_init(ali15x3_ide_init);
+module_exit(ali15x3_ide_exit);
 
 MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox");
 MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
-- 
cgit v1.2.3


From b2509ac1d9dbe7a9d3a9915afbe108978002c95b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:19 +0200
Subject: amd74xx: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/amd74xx.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 5115d448ff8..a91f2e873ba 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -341,6 +341,7 @@ static struct pci_driver driver = {
 	.name		= "AMD_IDE",
 	.id_table	= amd74xx_pci_tbl,
 	.probe		= amd74xx_probe,
+	.remove		= ide_pci_remove,
 };
 
 static int __init amd74xx_ide_init(void)
@@ -348,7 +349,13 @@ static int __init amd74xx_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit amd74xx_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(amd74xx_ide_init);
+module_exit(amd74xx_ide_exit);
 
 MODULE_AUTHOR("Vojtech Pavlik");
 MODULE_DESCRIPTION("AMD PCI IDE driver");
-- 
cgit v1.2.3


From f354fbc4b45a730aa0f876322ea4f096b47d1013 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:20 +0200
Subject: atiixp: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/atiixp.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index b483a68b39f..4c49c1ba618 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -184,6 +184,7 @@ static struct pci_driver driver = {
 	.name		= "ATIIXP_IDE",
 	.id_table	= atiixp_pci_tbl,
 	.probe		= atiixp_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init atiixp_ide_init(void)
@@ -191,7 +192,13 @@ static int __init atiixp_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit atiixp_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(atiixp_ide_init);
+module_exit(atiixp_ide_exit);
 
 MODULE_AUTHOR("HUI YU");
 MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE");
-- 
cgit v1.2.3


From e2b15b4765ca032d0837dfc8c195ecd3bc56a433 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:20 +0200
Subject: cmd64x: add ->remove method and module_exit()

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/cmd64x.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 4eebcf09e0d..0a4d194bc35 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -505,6 +505,7 @@ static struct pci_driver driver = {
 	.name		= "CMD64x_IDE",
 	.id_table	= cmd64x_pci_tbl,
 	.probe		= cmd64x_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init cmd64x_ide_init(void)
@@ -512,7 +513,13 @@ static int __init cmd64x_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit cmd64x_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(cmd64x_ide_init);
+module_exit(cmd64x_ide_exit);
 
 MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for CMD64x IDE");
-- 
cgit v1.2.3


From d16492a9789982955e627a7ffdcd1c3b945f7e85 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:20 +0200
Subject: cs5530: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/cs5530.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index ba82bad8bf4..dff345c763e 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -269,6 +269,7 @@ static struct pci_driver driver = {
 	.name		= "CS5530 IDE",
 	.id_table	= cs5530_pci_tbl,
 	.probe		= cs5530_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init cs5530_ide_init(void)
@@ -276,7 +277,13 @@ static int __init cs5530_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit cs5530_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(cs5530_ide_init);
+module_exit(cs5530_ide_exit);
 
 MODULE_AUTHOR("Mark Lord");
 MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE");
-- 
cgit v1.2.3


From 40c8a7f67d38de87f97a548b81b6cd0621a3ff9a Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:20 +0200
Subject: cs5535: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/cs5535.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 2161f43ca1b..a7300139153 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -194,6 +194,7 @@ static struct pci_driver driver = {
 	.name       = "CS5535_IDE",
 	.id_table   = cs5535_pci_tbl,
 	.probe      = cs5535_init_one,
+	.remove     = ide_pci_remove,
 };
 
 static int __init cs5535_ide_init(void)
@@ -201,7 +202,13 @@ static int __init cs5535_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit cs5535_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(cs5535_ide_init);
+module_exit(cs5535_ide_exit);
 
 MODULE_AUTHOR("AMD");
 MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
-- 
cgit v1.2.3


From cd68841b854e24076d41c32eae3ccfce6ae60a59 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:21 +0200
Subject: cy82c693: add ->remove method and module_exit()

Fix the refcounting for dev2 while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/cy82c693.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index abd27ed7c30..04f268866b6 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -420,11 +420,21 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev
 	    PCI_FUNC(dev->devfn) == 1) {
 		dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
 		ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
-		/* We leak pci refs here but thats ok - we can't be unloaded */
+		if (ret)
+			pci_dev_put(dev2);
 	}
 	return ret;
 }
 
+static void __devexit cy82c693_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+
+	ide_pci_remove(dev);
+	pci_dev_put(dev2);
+}
+
 static const struct pci_device_id cy82c693_pci_tbl[] = {
 	{ PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
 	{ 0, },
@@ -435,6 +445,7 @@ static struct pci_driver driver = {
 	.name		= "Cypress_IDE",
 	.id_table	= cy82c693_pci_tbl,
 	.probe		= cy82c693_init_one,
+	.remove		= cy82c693_remove,
 };
 
 static int __init cy82c693_ide_init(void)
@@ -442,7 +453,13 @@ static int __init cy82c693_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit cy82c693_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(cy82c693_ide_init);
+module_exit(cy82c693_ide_exit);
 
 MODULE_AUTHOR("Andreas Krebs, Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
-- 
cgit v1.2.3


From f566bcae9fb39b108e39a2f31594c028d6ee2e77 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:21 +0200
Subject: ide/pci/generic: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/generic.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index dd0caea5e4f..81fc171f8ff 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -174,6 +174,7 @@ static struct pci_driver driver = {
 	.name		= "PCI_IDE",
 	.id_table	= generic_pci_tbl,
 	.probe		= generic_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init generic_ide_init(void)
@@ -181,7 +182,13 @@ static int __init generic_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit generic_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(generic_ide_init);
+module_exit(generic_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for generic PCI IDE");
-- 
cgit v1.2.3


From 741ac62f6fca55ddbef52513fbc687ba6b04f99e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:21 +0200
Subject: hpt34x: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt34x.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index 3d70c5150ac..b52f8339102 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -169,6 +169,7 @@ static struct pci_driver driver = {
 	.name		= "HPT34x_IDE",
 	.id_table	= hpt34x_pci_tbl,
 	.probe		= hpt34x_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init hpt34x_ide_init(void)
@@ -176,7 +177,13 @@ static int __init hpt34x_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit hpt34x_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(hpt34x_ide_init);
+module_exit(hpt34x_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for Highpoint 34x IDE");
-- 
cgit v1.2.3


From a6c43a2be9721d00ef9d6ef5b7b0e8113444577b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:21 +0200
Subject: hpt366: add ->remove method and module_exit()

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt366.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 8f29571345a..398808905f9 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1627,6 +1627,17 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
 	return ret;
 }
 
+static void __devexit hpt366_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct ide_info *info = host->host_priv;
+	struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+
+	ide_pci_remove(dev);
+	pci_dev_put(dev2);
+	kfree(info);
+}
+
 static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366),  0 },
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372),  1 },
@@ -1642,6 +1653,7 @@ static struct pci_driver driver = {
 	.name		= "HPT366_IDE",
 	.id_table	= hpt366_pci_tbl,
 	.probe		= hpt366_init_one,
+	.remove		= hpt366_remove,
 };
 
 static int __init hpt366_ide_init(void)
@@ -1649,7 +1661,13 @@ static int __init hpt366_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit hpt366_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(hpt366_ide_init);
+module_exit(hpt366_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for Highpoint HPT366 IDE");
-- 
cgit v1.2.3


From 5102f768570b3486979afb68c595b71cfb7f026f Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:22 +0200
Subject: it8213: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/it8213.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 18219fa9ef0..575bf2386f8 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -198,6 +198,7 @@ static struct pci_driver driver = {
 	.name		= "ITE8213_IDE",
 	.id_table	= it8213_pci_tbl,
 	.probe		= it8213_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init it8213_ide_init(void)
@@ -205,7 +206,13 @@ static int __init it8213_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit it8213_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(it8213_ide_init);
+module_exit(it8213_ide_exit);
 
 MODULE_AUTHOR("Jack Lee, Alan Cox");
 MODULE_DESCRIPTION("PCI driver module for the ITE 8213");
-- 
cgit v1.2.3


From 87d8b61356108835f5e91c0fb32b830ec585978c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:22 +0200
Subject: it821x: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/it821x.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index e63fdafe18f..c5c91f2109d 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -665,6 +665,15 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic
 	return rc;
 }
 
+static void __devexit it821x_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct it821x_dev *itdevs = host->host_priv;
+
+	ide_pci_remove(dev);
+	kfree(itdevs);
+}
+
 static const struct pci_device_id it821x_pci_tbl[] = {
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 },
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 },
@@ -677,6 +686,7 @@ static struct pci_driver driver = {
 	.name		= "ITE821x IDE",
 	.id_table	= it821x_pci_tbl,
 	.probe		= it821x_init_one,
+	.remove		= it821x_remove,
 };
 
 static int __init it821x_ide_init(void)
@@ -684,7 +694,13 @@ static int __init it821x_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit it821x_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(it821x_ide_init);
+module_exit(it821x_ide_exit);
 
 module_param_named(noraid, it8212_noraid, int, S_IRUGO);
 MODULE_PARM_DESC(noraid, "Force card into bypass mode");
-- 
cgit v1.2.3


From 1bcaaba7749dce7c0506cff0e811c9bed8121f38 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:22 +0200
Subject: jmicron: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/jmicron.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index a7e3c14f7b0..39e221b076e 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -152,6 +152,7 @@ static struct pci_driver driver = {
 	.name		= "JMicron IDE",
 	.id_table	= jmicron_pci_tbl,
 	.probe		= jmicron_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init jmicron_ide_init(void)
@@ -159,7 +160,13 @@ static int __init jmicron_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit jmicron_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(jmicron_ide_init);
+module_exit(jmicron_ide_exit);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("PCI driver module for the JMicron in legacy modes");
-- 
cgit v1.2.3


From aa6e518d75742fd3ac3d2cb4c2bcbae850319fc1 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:23 +0200
Subject: ns87415: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/ns87415.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index a45c33c0c79..afcc742a63a 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -337,6 +337,7 @@ static struct pci_driver driver = {
 	.name		= "NS87415_IDE",
 	.id_table	= ns87415_pci_tbl,
 	.probe		= ns87415_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init ns87415_ide_init(void)
@@ -344,7 +345,13 @@ static int __init ns87415_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit ns87415_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(ns87415_ide_init);
+module_exit(ns87415_ide_exit);
 
 MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
-- 
cgit v1.2.3


From adc7f85ae68bd2e8db2e0136dcd4679891e5c321 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:23 +0200
Subject: opti621: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/opti621.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index edb9132ffbe..4895f2ff3f0 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -223,6 +223,7 @@ static struct pci_driver driver = {
 	.name		= "Opti621_IDE",
 	.id_table	= opti621_pci_tbl,
 	.probe		= opti621_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init opti621_ide_init(void)
@@ -230,7 +231,13 @@ static int __init opti621_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit opti621_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(opti621_ide_init);
+module_exit(opti621_ide_exit);
 
 MODULE_AUTHOR("Jaromir Koutek, Jan Harkes, Mark Lord");
 MODULE_DESCRIPTION("PCI driver module for Opti621 IDE");
-- 
cgit v1.2.3


From d69c8f8c0068b9fc7f5a5082d8a891618b732e2d Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:23 +0200
Subject: pdc202xx_new: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/pdc202xx_new.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 71a420feb98..9881a1a8b89 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -543,6 +543,15 @@ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_de
 	return ide_pci_init_one(dev, d, NULL);
 }
 
+static void __devexit pdc202new_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
+
+	ide_pci_remove(dev);
+	pci_dev_put(dev2);
+}
+
 static const struct pci_device_id pdc202new_pci_tbl[] = {
 	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), 0 },
 	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), 1 },
@@ -559,6 +568,7 @@ static struct pci_driver driver = {
 	.name		= "Promise_IDE",
 	.id_table	= pdc202new_pci_tbl,
 	.probe		= pdc202new_init_one,
+	.remove		= pdc202new_remove,
 };
 
 static int __init pdc202new_ide_init(void)
@@ -566,7 +576,13 @@ static int __init pdc202new_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit pdc202new_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(pdc202new_ide_init);
+module_exit(pdc202new_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
 MODULE_DESCRIPTION("PCI driver module for Promise PDC20268 and higher");
-- 
cgit v1.2.3


From 574a1c24b63fdb584935b4924a38b451eeb0880e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:24 +0200
Subject: pdc202xx_old: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/pdc202xx_old.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index eba1d60a73a..17d99ce273a 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -429,6 +429,7 @@ static struct pci_driver driver = {
 	.name		= "Promise_Old_IDE",
 	.id_table	= pdc202xx_pci_tbl,
 	.probe		= pdc202xx_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init pdc202xx_ide_init(void)
@@ -436,7 +437,13 @@ static int __init pdc202xx_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit pdc202xx_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(pdc202xx_ide_init);
+module_exit(pdc202xx_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
 MODULE_DESCRIPTION("PCI driver module for older Promise IDE");
-- 
cgit v1.2.3


From da8c3e0d21c5dbb2815d7c8f1f09e0c68f626ed1 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:24 +0200
Subject: piix: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/piix.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 359f65ddcbf..c16b1ab4d4f 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -462,6 +462,7 @@ static struct pci_driver driver = {
 	.name		= "PIIX_IDE",
 	.id_table	= piix_pci_tbl,
 	.probe		= piix_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init piix_ide_init(void)
@@ -470,7 +471,13 @@ static int __init piix_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit piix_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(piix_ide_init);
+module_exit(piix_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick, Andrzej Krzysztofowicz");
 MODULE_DESCRIPTION("PCI driver module for Intel PIIX IDE");
-- 
cgit v1.2.3


From 0fd188047ca75df85191cc55f929cb2889631430 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:24 +0200
Subject: rz1000: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/rz1000.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index 860ffdeca09..f7a3b9aff29 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -62,6 +62,7 @@ static struct pci_driver driver = {
 	.name		= "RZ1000_IDE",
 	.id_table	= rz1000_pci_tbl,
 	.probe		= rz1000_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init rz1000_ide_init(void)
@@ -69,7 +70,13 @@ static int __init rz1000_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit rz1000_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(rz1000_ide_init);
+module_exit(rz1000_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE");
-- 
cgit v1.2.3


From 991f5e69c512b284aaec81432dff0440b2a2f418 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:24 +0200
Subject: sc1200: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/sc1200.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index fa2ce76837d..6509560ba66 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -329,6 +329,7 @@ static struct pci_driver driver = {
 	.name		= "SC1200_IDE",
 	.id_table	= sc1200_pci_tbl,
 	.probe		= sc1200_init_one,
+	.remove		= ide_pci_remove,
 #ifdef CONFIG_PM
 	.suspend	= sc1200_suspend,
 	.resume		= sc1200_resume,
@@ -340,7 +341,13 @@ static int __init sc1200_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit sc1200_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(sc1200_ide_init);
+module_exit(sc1200_ide_exit);
 
 MODULE_AUTHOR("Mark Lord");
 MODULE_DESCRIPTION("PCI driver module for NS SC1200 IDE");
-- 
cgit v1.2.3


From bc2c9a8025921972f0774859b8f19b324734e824 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:25 +0200
Subject: serverworks: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/serverworks.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 34abdfc8d56..eca52fede28 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -439,6 +439,7 @@ static struct pci_driver driver = {
 	.name		= "Serverworks_IDE",
 	.id_table	= svwks_pci_tbl,
 	.probe		= svwks_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init svwks_ide_init(void)
@@ -446,7 +447,13 @@ static int __init svwks_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit svwks_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(svwks_ide_init);
+module_exit(svwks_ide_exit);
 
 MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE");
-- 
cgit v1.2.3


From fe3825808ad67af02bd826a0d2ca6831e947e80e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:25 +0200
Subject: siimage: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/siimage.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 1388ffa9764..f2e4dac9b71 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -800,6 +800,24 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 	return rc;
 }
 
+static void __devexit siimage_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	void __iomem *ioaddr = host->host_priv;
+
+	ide_pci_remove(dev);
+
+	if (ioaddr) {
+		resource_size_t bar5 = pci_resource_start(dev, 5);
+		unsigned long barsize = pci_resource_len(dev, 5);
+
+		iounmap(ioaddr);
+		release_mem_region(bar5, barsize);
+	}
+
+	pci_disable_device(dev);
+}
+
 static const struct pci_device_id siimage_pci_tbl[] = {
 	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680),    0 },
 #ifdef CONFIG_BLK_DEV_IDE_SATA
@@ -814,6 +832,7 @@ static struct pci_driver driver = {
 	.name		= "SiI_IDE",
 	.id_table	= siimage_pci_tbl,
 	.probe		= siimage_init_one,
+	.remove		= siimage_remove,
 };
 
 static int __init siimage_ide_init(void)
@@ -821,7 +840,13 @@ static int __init siimage_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit siimage_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(siimage_ide_init);
+module_exit(siimage_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick, Alan Cox");
 MODULE_DESCRIPTION("PCI driver module for SiI IDE");
-- 
cgit v1.2.3


From 1ceb906b4062954e92295191402e9214345ee0e9 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:25 +0200
Subject: sis5513: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/sis5513.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index a2330c4ac75..f3cf7c6c0cc 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -586,6 +586,12 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi
 	return ide_pci_init_one(dev, &d, NULL);
 }
 
+static void __devexit sis5513_remove(struct pci_dev *dev)
+{
+	ide_pci_remove(dev);
+	pci_disable_device(dev);
+}
+
 static const struct pci_device_id sis5513_pci_tbl[] = {
 	{ PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5513), 0 },
 	{ PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5518), 0 },
@@ -598,6 +604,7 @@ static struct pci_driver driver = {
 	.name		= "SIS_IDE",
 	.id_table	= sis5513_pci_tbl,
 	.probe		= sis5513_init_one,
+	.remove		= sis5513_remove,
 };
 
 static int __init sis5513_ide_init(void)
@@ -605,7 +612,13 @@ static int __init sis5513_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit sis5513_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(sis5513_ide_init);
+module_exit(sis5513_ide_exit);
 
 MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
 MODULE_DESCRIPTION("PCI driver module for SIS IDE");
-- 
cgit v1.2.3


From 6ce7199897bcbad05ecd06a4df22795fb37f4d0a Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:25 +0200
Subject: sl82c105: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/sl82c105.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index be22f8125d7..72899f85c5b 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -348,6 +348,7 @@ static struct pci_driver driver = {
 	.name		= "W82C105_IDE",
 	.id_table	= sl82c105_pci_tbl,
 	.probe		= sl82c105_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init sl82c105_ide_init(void)
@@ -355,7 +356,13 @@ static int __init sl82c105_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit sl82c105_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(sl82c105_ide_init);
+module_exit(sl82c105_ide_exit);
 
 MODULE_DESCRIPTION("PCI driver module for W82C105 IDE");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 64b0fed31d6704e4e2e42e9a1ac5995b0a1b54e4 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:25 +0200
Subject: slc90e66: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/slc90e66.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 2fc2f2cf220..fee5ebe4bb9 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -157,6 +157,7 @@ static struct pci_driver driver = {
 	.name		= "SLC90e66_IDE",
 	.id_table	= slc90e66_pci_tbl,
 	.probe		= slc90e66_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init slc90e66_ide_init(void)
@@ -164,7 +165,13 @@ static int __init slc90e66_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit slc90e66_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(slc90e66_ide_init);
+module_exit(slc90e66_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE");
-- 
cgit v1.2.3


From ea881d6d6c58aa6d56105d1faba7432243ea7118 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:26 +0200
Subject: tc86c001: add ->remove method and module_exit()

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/tc86c001.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index bb329219935..102cd7c40cd 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -232,6 +232,13 @@ out:
 	return rc;
 }
 
+static void __devexit tc86c001_remove(struct pci_dev *dev)
+{
+	ide_pci_remove(dev);
+	pci_release_region(dev, 5);
+	pci_disable_device(dev);
+}
+
 static const struct pci_device_id tc86c001_pci_tbl[] = {
 	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
 	{ 0, }
@@ -241,14 +248,22 @@ MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
 static struct pci_driver driver = {
 	.name		= "TC86C001",
 	.id_table	= tc86c001_pci_tbl,
-	.probe		= tc86c001_init_one
+	.probe		= tc86c001_init_one,
+	.remove		= tc86c001_remove,
 };
 
 static int __init tc86c001_ide_init(void)
 {
 	return ide_pci_register_driver(&driver);
 }
+
+static void __exit tc86c001_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(tc86c001_ide_init);
+module_exit(tc86c001_ide_exit);
 
 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
 MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
-- 
cgit v1.2.3


From 29d72f2df933ea5ecf294b170b2f02af2af88120 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:26 +0200
Subject: triflex: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/triflex.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 60dcb645d1b..78e24ac8097 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -117,6 +117,7 @@ static struct pci_driver driver = {
 	.name		= "TRIFLEX_IDE",
 	.id_table	= triflex_pci_tbl,
 	.probe		= triflex_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init triflex_ide_init(void)
@@ -124,7 +125,13 @@ static int __init triflex_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit triflex_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(triflex_ide_init);
+module_exit(triflex_ide_exit);
 
 MODULE_AUTHOR("Torben Mathiasen");
 MODULE_DESCRIPTION("PCI driver module for Compaq Triflex IDE");
-- 
cgit v1.2.3


From fc2c32b737fa370683f8c44d74f41febe33b9c23 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:26 +0200
Subject: trm290: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/trm290.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index d8127b51a54..449f4de9a70 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -353,6 +353,7 @@ static struct pci_driver driver = {
 	.name		= "TRM290_IDE",
 	.id_table	= trm290_pci_tbl,
 	.probe		= trm290_init_one,
+	.remove		= ide_pci_remove,
 };
 
 static int __init trm290_ide_init(void)
@@ -360,7 +361,13 @@ static int __init trm290_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit trm290_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(trm290_ide_init);
+module_exit(trm290_ide_exit);
 
 MODULE_AUTHOR("Mark Lord");
 MODULE_DESCRIPTION("PCI driver module for Tekram TRM290 IDE");
-- 
cgit v1.2.3


From 585f67e736eece4cdf96b628042170273221e770 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:26 +0200
Subject: via82cxxx: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/via82cxxx.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index bc1675da37d..5f07eeb736a 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -467,6 +467,15 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 	return rc;
 }
 
+static void __devexit via_remove(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	struct via82cxxx_dev *vdev = host->host_priv;
+
+	ide_pci_remove(dev);
+	kfree(vdev);
+}
+
 static const struct pci_device_id via_pci_tbl[] = {
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1),  0 },
 	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1),  0 },
@@ -481,6 +490,7 @@ static struct pci_driver driver = {
 	.name 		= "VIA_IDE",
 	.id_table 	= via_pci_tbl,
 	.probe 		= via_init_one,
+	.remove		= via_remove,
 };
 
 static int __init via_ide_init(void)
@@ -488,7 +498,13 @@ static int __init via_ide_init(void)
 	return ide_pci_register_driver(&driver);
 }
 
+static void __exit via_ide_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
 module_init(via_ide_init);
+module_exit(via_ide_exit);
 
 MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for VIA IDE");
-- 
cgit v1.2.3


From 8e27cb1135de4cc69bf358209f91e1f7ba81eca1 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:27 +0200
Subject: icside: add module_exit()

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/icside.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index f575e8341ae..df4af408395 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -710,8 +710,14 @@ static int __init icside_init(void)
 	return ecard_register_driver(&icside_driver);
 }
 
+static void __exit icside_exit(void);
+{
+	ecard_unregister_driver(&icside_driver);
+}
+
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("ICS IDE driver");
 
 module_init(icside_init);
+module_exit(icside_exit);
-- 
cgit v1.2.3


From 37c5ef56989717d871d048f98fb6411e7a17c43d Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:27 +0200
Subject: rapide: add module_exit()

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/rapide.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index 2bdd8b734af..78d27d9ae43 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -95,7 +95,13 @@ static int __init rapide_init(void)
 	return ecard_register_driver(&rapide_driver);
 }
 
+static void __exit rapide_exit(void)
+{
+	ecard_unregister_driver(&rapide_driver);
+}
+
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Yellowstone RAPIDE driver");
 
 module_init(rapide_init);
+module_exit(rapide_exit);
-- 
cgit v1.2.3


From b0a62817961796f6dcef5f316134d8bc7279bf6e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:27 +0200
Subject: ide: fix <asm-xtensa/ide.h>

* Add missing <asm-generic/ide_iops.h> include.

While at it:

* Remove needless ide_default_{irq,io_base}() inlines.

Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/asm-xtensa/ide.h | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/include/asm-xtensa/ide.h b/include/asm-xtensa/ide.h
index 6b912742a42..cb995701c42 100644
--- a/include/asm-xtensa/ide.h
+++ b/include/asm-xtensa/ide.h
@@ -19,17 +19,8 @@
 # define MAX_HWIFS	1
 #endif
 
-static __inline__ int ide_default_irq(unsigned long base)
-{
-	/* Unsupported! */
-  	return 0;
-}
-
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-	/* Unsupported! */
-  	return 0;
-}
+#include <asm-generic/ide_iops.h>
 
 #endif	/* __KERNEL__ */
+
 #endif	/* _XTENSA_IDE_H */
-- 
cgit v1.2.3


From ac32f3238c1d95a6ebea2c312160dbdbd61bf91c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:27 +0200
Subject: ide-generic: fix ide_default_io_base() for m32r

Fix ide_default_io_base() to match ide_default_irq().

Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/asm-m32r/ide.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
index 1e7f6474d13..72798d62422 100644
--- a/include/asm-m32r/ide.h
+++ b/include/asm-m32r/ide.h
@@ -52,12 +52,20 @@ static __inline__ int ide_default_irq(unsigned long base)
 static __inline__ unsigned long ide_default_io_base(int index)
 {
 	switch (index) {
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) \
+	|| defined(CONFIG_PLAT_OPSPUT)
+		case 0:	return 0x1f0;
+#elif defined(CONFIG_PLAT_MAPPI3)
+		case 0:	return 0x1f0;
+		case 1:	return 0x170;
+#else
 		case 0:	return 0x1f0;
 		case 1:	return 0x170;
 		case 2: return 0x1e8;
 		case 3: return 0x168;
 		case 4: return 0x1e0;
 		case 5: return 0x160;
+#endif
 		default:
 			return 0;
 	}
-- 
cgit v1.2.3


From dbdec839c4c2bfc8f2da8e50c06b9947e5ad0394 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:28 +0200
Subject: ide-generic: minor fix for mips

Move ide_probe_legacy() call to ide_generic_init() so it fails
early if necessary and returns the proper error value (nowadays
ide_default_io_base() is used only by ide-generic).

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-generic.c           | 4 ++++
 include/asm-mips/mach-generic/ide.h | 2 --
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 31d98fec775..567fd843c7f 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -87,6 +87,10 @@ static int __init ide_generic_init(void)
 	unsigned long io_addr;
 	int i, rc;
 
+#ifdef CONFIG_MIPS
+	if (!ide_probe_legacy())
+		return -ENODEV;
+#endif
 	printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
 			 "parameter for probing all legacy ISA IDE ports\n");
 
diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
index 0f6c251f5fe..71a01c5aec1 100644
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -72,8 +72,6 @@ static __inline__ int ide_default_irq(unsigned long base)
 
 static __inline__ unsigned long ide_default_io_base(int index)
 {
-	if (!ide_probe_legacy())
-		return 0;
 	/*
 	 *      If PCI is present then it is not safe to poke around
 	 *      the other legacy IDE ports. Only 0x1f0 and 0x170 are
-- 
cgit v1.2.3


From b6cd7da5be2522b62bbc48d41b36c828b88e02fe Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:28 +0200
Subject: ide-generic: remove "no_pci_devices()" quirk from
 ide_default_io_base()

Since the decision to probe for ISA ide2-6 is now left to the user
"no_pci_devices()" quirk is no longer needed and may be removed.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/asm-mips/mach-generic/ide.h | 18 ++++--------------
 include/asm-x86/ide.h               | 18 ++++--------------
 2 files changed, 8 insertions(+), 28 deletions(-)

diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
index 71a01c5aec1..f34740ee677 100644
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -72,23 +72,13 @@ static __inline__ int ide_default_irq(unsigned long base)
 
 static __inline__ unsigned long ide_default_io_base(int index)
 {
-	/*
-	 *      If PCI is present then it is not safe to poke around
-	 *      the other legacy IDE ports. Only 0x1f0 and 0x170 are
-	 *      defined compatibility mode ports for PCI. A user can
-	 *      override this using ide= but we must default safe.
-	 */
-	if (no_pci_devices()) {
-		switch (index) {
-		case 2: return 0x1e8;
-		case 3: return 0x168;
-		case 4: return 0x1e0;
-		case 5: return 0x160;
-		}
-	}
 	switch (index) {
 	case 0: return 0x1f0;
 	case 1: return 0x170;
+	case 2: return 0x1e8;
+	case 3: return 0x168;
+	case 4: return 0x1e0;
+	case 5: return 0x160;
 	default:
 		return 0;
 	}
diff --git a/include/asm-x86/ide.h b/include/asm-x86/ide.h
index cf9c98e5bdb..34050747f38 100644
--- a/include/asm-x86/ide.h
+++ b/include/asm-x86/ide.h
@@ -36,23 +36,13 @@ static __inline__ int ide_default_irq(unsigned long base)
 
 static __inline__ unsigned long ide_default_io_base(int index)
 {
-	/*
-	 *	If PCI is present then it is not safe to poke around
-	 *	the other legacy IDE ports. Only 0x1f0 and 0x170 are
-	 *	defined compatibility mode ports for PCI. A user can 
-	 *	override this using ide= but we must default safe.
-	 */
-	if (no_pci_devices()) {
-		switch(index) {
-			case 2: return 0x1e8;
-			case 3: return 0x168;
-			case 4: return 0x1e0;
-			case 5: return 0x160;
-		}
-	}
 	switch (index) {
 		case 0:	return 0x1f0;
 		case 1:	return 0x170;
+		case 2: return 0x1e8;
+		case 3: return 0x168;
+		case 4: return 0x1e0;
+		case 5: return 0x160;
 		default:
 			return 0;
 	}
-- 
cgit v1.2.3


From 2c9d86438a0104800da2a8ecdc1e27baf38ba6a4 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:29 +0200
Subject: ide: remove <asm-cris/ide.h>

Remove <asm-cris/arch-v{10,32}/ide.h> and <asm-cris/ide.h>.

This has been a broken code for some time now and needs rewrite
to match IDE core code / host driver model anyway.

Cc: Jesper Nilsson <Jesper.Nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/asm-cris/arch-v10/ide.h | 91 -----------------------------------------
 include/asm-cris/arch-v32/ide.h | 56 -------------------------
 include/asm-cris/ide.h          |  1 -
 3 files changed, 148 deletions(-)
 delete mode 100644 include/asm-cris/arch-v10/ide.h
 delete mode 100644 include/asm-cris/arch-v32/ide.h
 delete mode 100644 include/asm-cris/ide.h

diff --git a/include/asm-cris/arch-v10/ide.h b/include/asm-cris/arch-v10/ide.h
deleted file mode 100644
index 5366e623932..00000000000
--- a/include/asm-cris/arch-v10/ide.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  linux/include/asm-cris/ide.h
- *
- *  Copyright (C) 2000, 2001, 2002  Axis Communications AB
- *
- *  Authors:    Bjorn Wesen
- *
- */
-
-/*
- *  This file contains the ETRAX 100LX specific IDE code.
- */
-
-#ifndef __ASMCRIS_IDE_H
-#define __ASMCRIS_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/arch/svinto.h>
-#include <asm/io.h>
-#include <asm-generic/ide_iops.h>
-
-
-/* ETRAX 100 can support 4 IDE busses on the same pins (serialized) */
-
-#define MAX_HWIFS	4
-
-static inline int ide_default_irq(unsigned long base)
-{
-	/* all IDE busses share the same IRQ, number 4.
-	 * this has the side-effect that ide-probe.c will cluster our 4 interfaces
-	 * together in a hwgroup, and will serialize accesses. this is good, because
-	 * we can't access more than one interface at the same time on ETRAX100.
-	 */
-	return 4;
-}
-
-static inline unsigned long ide_default_io_base(int index)
-{
-	/* we have no real I/O base address per interface, since all go through the
-	 * same register. but in a bitfield in that register, we have the i/f number.
-	 * so we can use the io_base to remember that bitfield.
-	 */
-	static const unsigned long io_bases[MAX_HWIFS] = {
-		IO_FIELD(R_ATA_CTRL_DATA, sel, 0),
-		IO_FIELD(R_ATA_CTRL_DATA, sel, 1),
-		IO_FIELD(R_ATA_CTRL_DATA, sel, 2),
-		IO_FIELD(R_ATA_CTRL_DATA, sel, 3)
-	};
-	return io_bases[index];
-}
-
-/* this is called once for each interface, to setup the port addresses. data_port is the result
- * of the ide_default_io_base call above. ctrl_port will be 0, but that is don't care for us.
- */
-
-static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, unsigned long ctrl_port, int *irq)
-{
-	int i;
-
-	/* fill in ports for ATA addresses 0 to 7 */
-	for (i = 0; i <= 7; i++) {
-		hw->io_ports_array[i] = data_port |
-			IO_FIELD(R_ATA_CTRL_DATA, addr, i) |
-			IO_STATE(R_ATA_CTRL_DATA, cs0, active);
-	}
-
-	/* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
-	hw->io_ports.ctl_addr = data_port |
-			IO_FIELD(R_ATA_CTRL_DATA, addr, 6) |
-			IO_STATE(R_ATA_CTRL_DATA, cs1, active);
-
-	/* whats this for ? */
-	hw->io_ports.irq_addr = 0;
-}
-
-static inline void ide_init_default_hwifs(void)
-{
-	hw_regs_t hw;
-	int index;
-
-	for(index = 0; index < MAX_HWIFS; index++) {
-		ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL);
-		hw.irq = ide_default_irq(ide_default_io_base(index));
-		ide_register_hw(&hw, NULL);
-	}
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMCRIS_IDE_H */
diff --git a/include/asm-cris/arch-v32/ide.h b/include/asm-cris/arch-v32/ide.h
deleted file mode 100644
index fb9c3627a5b..00000000000
--- a/include/asm-cris/arch-v32/ide.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-cris/ide.h
- *
- *  Copyright (C) 2000-2004  Axis Communications AB
- *
- *  Authors:    Bjorn Wesen, Mikael Starvik
- *
- */
-
-/*
- *  This file contains the ETRAX FS specific IDE code.
- */
-
-#ifndef __ASMCRIS_IDE_H
-#define __ASMCRIS_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/arch/hwregs/intr_vect.h>
-#include <asm/arch/hwregs/ata_defs.h>
-#include <asm/io.h>
-#include <asm-generic/ide_iops.h>
-
-
-/* ETRAX FS can support 4 IDE busses on the same pins (serialized) */
-
-#define MAX_HWIFS	4
-
-static inline int ide_default_irq(unsigned long base)
-{
-	/* all IDE busses share the same IRQ,
-	 * this has the side-effect that ide-probe.c will cluster our 4 interfaces
-	 * together in a hwgroup, and will serialize accesses. this is good, because
-	 * we can't access more than one interface at the same time on ETRAX100.
-	 */
-	return ATA_INTR_VECT;
-}
-
-static inline unsigned long ide_default_io_base(int index)
-{
-	reg_ata_rw_ctrl2 ctrl2 = {.sel = index};
-	/* we have no real I/O base address per interface, since all go through the
-	 * same register. but in a bitfield in that register, we have the i/f number.
-	 * so we can use the io_base to remember that bitfield.
-	 */
-        ctrl2.sel = index;
-
-	return REG_TYPE_CONV(unsigned long, reg_ata_rw_ctrl2, ctrl2);
-}
-
-#define IDE_ARCH_ACK_INTR
-#define ide_ack_intr(hwif)	((hwif)->ack_intr(hwif))
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMCRIS_IDE_H */
diff --git a/include/asm-cris/ide.h b/include/asm-cris/ide.h
deleted file mode 100644
index a894f66665f..00000000000
--- a/include/asm-cris/ide.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/arch/ide.h>
-- 
cgit v1.2.3


From d83b8b85cd56a083d30df73f3fd5e4714591b910 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:30 +0200
Subject: ide: define MAX_HWIFS in <linux/ide.h>

* Now that ide_hwif_t instances are allocated dynamically
  the difference between MAX_HWIFS == 2 and MAX_HWIFS == 10
  is ~100 bytes (x86-32) so use MAX_HWIFS == 10 on all archs
  except these ones that use MAX_HWIFS == 1.

* Define MAX_HWIFS in <linux/ide.h> instead of <asm/ide.h>.

[ Please note that avr32/cris/v850 have no <asm/ide.h>
  and alpha/ia64/sh always define CONFIG_IDE_MAX_HWIFS. ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/asm-arm/ide.h               | 4 ----
 include/asm-blackfin/ide.h          | 2 --
 include/asm-frv/ide.h               | 4 ----
 include/asm-h8300/ide.h             | 2 --
 include/asm-m32r/ide.h              | 8 --------
 include/asm-m68k/ide.h              | 4 ----
 include/asm-mips/mach-generic/ide.h | 8 --------
 include/asm-mn10300/ide.h           | 4 ----
 include/asm-parisc/ide.h            | 4 ----
 include/asm-powerpc/ide.h           | 8 --------
 include/asm-sparc/ide.h             | 3 ---
 include/asm-x86/ide.h               | 9 ---------
 include/asm-xtensa/ide.h            | 5 -----
 include/linux/ide.h                 | 8 ++++++++
 14 files changed, 8 insertions(+), 65 deletions(-)

diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h
index 88f4d231ce4..a48019f99d0 100644
--- a/include/asm-arm/ide.h
+++ b/include/asm-arm/ide.h
@@ -13,10 +13,6 @@
 
 #ifdef __KERNEL__
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS	4
-#endif
-
 #define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
 #define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
 #define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
diff --git a/include/asm-blackfin/ide.h b/include/asm-blackfin/ide.h
index 5b88de115bf..90bc50bd22e 100644
--- a/include/asm-blackfin/ide.h
+++ b/include/asm-blackfin/ide.h
@@ -17,8 +17,6 @@
 #ifdef __KERNEL__
 /****************************************************************************/
 
-#define MAX_HWIFS	1
-
 #include <asm-generic/ide_iops.h>
 
 /****************************************************************************/
diff --git a/include/asm-frv/ide.h b/include/asm-frv/ide.h
index 8c9a540d434..7ebcc56a222 100644
--- a/include/asm-frv/ide.h
+++ b/include/asm-frv/ide.h
@@ -18,10 +18,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS 8
-#endif
-
 /****************************************************************************/
 /*
  * some bits needed for parts of the IDE subsystem to compile
diff --git a/include/asm-h8300/ide.h b/include/asm-h8300/ide.h
index f8535ce7476..8f79ba2ff92 100644
--- a/include/asm-h8300/ide.h
+++ b/include/asm-h8300/ide.h
@@ -16,8 +16,6 @@
 #ifdef __KERNEL__
 /****************************************************************************/
 
-#define MAX_HWIFS	1
-
 #include <asm-generic/ide_iops.h>
 
 /****************************************************************************/
diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
index 72798d62422..d755d41b993 100644
--- a/include/asm-m32r/ide.h
+++ b/include/asm-m32r/ide.h
@@ -15,14 +15,6 @@
 
 #include <asm/m32r.h>
 
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS	10
-# else
-#define MAX_HWIFS	2
-# endif
-#endif
-
 static __inline__ int ide_default_irq(unsigned long base)
 {
 	switch (base) {
diff --git a/include/asm-m68k/ide.h b/include/asm-m68k/ide.h
index 909c6dfd385..1daf6cbdd9f 100644
--- a/include/asm-m68k/ide.h
+++ b/include/asm-m68k/ide.h
@@ -45,10 +45,6 @@
 #include <asm/macints.h>
 #endif
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS	4	/* same as the other archs */
-#endif
-
 /*
  * Get rid of defs from io.h - ide has its private and conflicting versions
  * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
index f34740ee677..8ee6bff030d 100644
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -19,14 +19,6 @@
 #include <linux/stddef.h>
 #include <asm/processor.h>
 
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS	10
-# else
-#define MAX_HWIFS	6
-# endif
-#endif
-
 static __inline__ int ide_probe_legacy(void)
 {
 #ifdef CONFIG_PCI
diff --git a/include/asm-mn10300/ide.h b/include/asm-mn10300/ide.h
index dc235121ec4..6adcdd92e83 100644
--- a/include/asm-mn10300/ide.h
+++ b/include/asm-mn10300/ide.h
@@ -23,10 +23,6 @@
 #undef SUPPORT_VLB_SYNC
 #define SUPPORT_VLB_SYNC 0
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS 8
-#endif
-
 /*
  * some bits needed for parts of the IDE subsystem to compile
  */
diff --git a/include/asm-parisc/ide.h b/include/asm-parisc/ide.h
index db0c9441009..c246ef75017 100644
--- a/include/asm-parisc/ide.h
+++ b/include/asm-parisc/ide.h
@@ -13,10 +13,6 @@
 
 #ifdef __KERNEL__
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS	2
-#endif
-
 #define ide_request_irq(irq,hand,flg,dev,id)	request_irq((irq),(hand),(flg),(dev),(id))
 #define ide_free_irq(irq,dev_id)		free_irq((irq), (dev_id))
 #define ide_request_region(from,extent,name)	request_region((from), (extent), (name))
diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h
index 3d90bf7d3d7..262def6a9f0 100644
--- a/include/asm-powerpc/ide.h
+++ b/include/asm-powerpc/ide.h
@@ -14,14 +14,6 @@
 #endif
 #include <asm/io.h>
 
-#ifndef MAX_HWIFS
-#ifdef __powerpc64__
-#define MAX_HWIFS	10
-#else
-#define MAX_HWIFS	8
-#endif
-#endif
-
 #define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
 #define __ide_mm_insl(p, a, c)	readsl((void __iomem *)(p), (a), (c))
 #define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h
index 879fcec72dc..b7af3d65823 100644
--- a/include/asm-sparc/ide.h
+++ b/include/asm-sparc/ide.h
@@ -21,9 +21,6 @@
 #include <asm/psr.h>
 #endif
 
-#undef  MAX_HWIFS
-#define MAX_HWIFS	2
-
 #define __ide_insl(data_reg, buffer, wcount) \
 	__ide_insw(data_reg, buffer, (wcount)<<1)
 #define __ide_outsl(data_reg, buffer, wcount) \
diff --git a/include/asm-x86/ide.h b/include/asm-x86/ide.h
index 34050747f38..bc54879daed 100644
--- a/include/asm-x86/ide.h
+++ b/include/asm-x86/ide.h
@@ -11,15 +11,6 @@
 
 #ifdef __KERNEL__
 
-
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS	10
-# else
-#define MAX_HWIFS	6
-# endif
-#endif
-
 static __inline__ int ide_default_irq(unsigned long base)
 {
 	switch (base) {
diff --git a/include/asm-xtensa/ide.h b/include/asm-xtensa/ide.h
index cb995701c42..18342a2cc77 100644
--- a/include/asm-xtensa/ide.h
+++ b/include/asm-xtensa/ide.h
@@ -14,11 +14,6 @@
 
 #ifdef __KERNEL__
 
-
-#ifndef MAX_HWIFS
-# define MAX_HWIFS	1
-#endif
-
 #include <asm-generic/ide_iops.h>
 
 #endif	/* __KERNEL__ */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index dbd0aeb3a56..76fe00b24b5 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -213,6 +213,14 @@ static inline int __ide_default_irq(unsigned long base)
 
 #include <asm/ide.h>
 
+#ifndef MAX_HWIFS
+#if defined(CONFIG_BLACKFIN) || defined(CONFIG_H8300) || defined(CONFIG_XTENSA)
+# define MAX_HWIFS	1
+#else
+# define MAX_HWIFS	10
+#endif
+#endif
+
 #if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
 #undef MAX_HWIFS
 #define MAX_HWIFS	CONFIG_IDE_MAX_HWIFS
-- 
cgit v1.2.3


From ffed0b6e1a6f5132681d4b521531d992f893190b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:30 +0200
Subject: ide-generic: remove broken PPC_PREP support

PPC_PREP has been depending on BROKEN for some time now.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/asm-powerpc/ide.h | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h
index 262def6a9f0..1aaf27be874 100644
--- a/include/asm-powerpc/ide.h
+++ b/include/asm-powerpc/ide.h
@@ -31,16 +31,6 @@ static __inline__ int ide_default_irq(unsigned long base)
 	case 0x1f0:	return 14;
 	case 0x170:	return 15;
 	}
-#endif
-#ifdef CONFIG_PPC_PREP
-	switch (base) {
-	case 0x1f0:	return 13;
-	case 0x170:	return 13;
-	case 0x1e8:	return 11;
-	case 0x168:	return 10;
-	case 0xfff0:	return 14;	/* MCP(N)750 ide0 */
-	case 0xffe0:	return 15;	/* MCP(N)750 ide1 */
-	}
 #endif
 	return 0;
 }
@@ -53,14 +43,6 @@ static __inline__ unsigned long ide_default_io_base(int index)
 	case 0:		return 0x1f0;
 	case 1:		return 0x170;
 	}
-#endif
-#ifdef CONFIG_PPC_PREP
-	switch (index) {
-	case 0:		return 0x1f0;
-	case 1:		return 0x170;
-	case 2:		return 0x1e8;
-	case 3:		return 0x168;
-	}
 #endif
 	return 0;
 }
-- 
cgit v1.2.3


From 35bbac9a2f73a7e0967d0a1d3e3673e2590ef716 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:30 +0200
Subject: ide-generic: is no longer needed on ppc32

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 04d9c4d459d..130ef64b44f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -314,7 +314,7 @@ comment "IDE chipset support/bugfixes"
 
 config IDE_GENERIC
 	tristate "generic/default IDE chipset support"
-	depends on ALPHA || X86 || IA64 || M32R || MIPS || PPC32
+	depends on ALPHA || X86 || IA64 || M32R || MIPS
 	help
 	  If unsure, say N.
 
-- 
cgit v1.2.3


From f01d35d87f39ab794ddcdefadb79c11054bcbfbc Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:31 +0200
Subject: ide-generic: remove ide_default_{io_base,irq}() inlines (take 3)

Replace ide_default_{io_base,irq}() inlines by legacy_{bases,irqs}[].

v2:
Add missing zero-ing of hws[] (caught during testing by Borislav Petkov).

v3:
Fix zero-oing of hws[] for _real_ this time.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-generic.c           | 32 +++++++++++++++++++++---
 include/asm-alpha/ide.h             | 24 ------------------
 include/asm-ia64/ide.h              | 29 ---------------------
 include/asm-m32r/ide.h              | 50 -------------------------------------
 include/asm-mips/mach-generic/ide.h | 28 ---------------------
 include/asm-x86/ide.h               | 28 ---------------------
 6 files changed, 29 insertions(+), 162 deletions(-)

diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 567fd843c7f..8fe8b5b9cf7 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -20,6 +20,11 @@
 #include <linux/module.h>
 #include <linux/ide.h>
 
+/* FIXME: convert m32r to use ide_platform host driver */
+#ifdef CONFIG_M32R
+#include <asm/m32r.h>
+#endif
+
 #define DRV_NAME	"ide_generic"
 
 static int probe_mask = 0x03;
@@ -80,6 +85,21 @@ static int __init ide_generic_sysfs_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) \
+	|| defined(CONFIG_PLAT_OPSPUT)
+static const u16 legacy_bases[] = { 0x1f0 };
+static const int legacy_irqs[]  = { PLD_IRQ_CFIREQ };
+#elif defined(CONFIG_PLAT_MAPPI3)
+static const u16 legacy_bases[] = { 0x1f0, 0x170 };
+static const int legacy_irqs[]  = { PLD_IRQ_CFIREQ, PLD_IRQ_IDEIREQ };
+#elif defined(CONFIG_ALPHA)
+static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 };
+static const int legacy_irqs[]  = { 14, 15, 11, 10 };
+#else
+static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
+static const int legacy_irqs[]  = { 14, 15, 11, 10, 8, 12 };
+#endif
+
 static int __init ide_generic_init(void)
 {
 	hw_regs_t hw[MAX_HWIFS], *hws[MAX_HWIFS];
@@ -94,8 +114,10 @@ static int __init ide_generic_init(void)
 	printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
 			 "parameter for probing all legacy ISA IDE ports\n");
 
-	for (i = 0; i < MAX_HWIFS; i++) {
-		io_addr = ide_default_io_base(i);
+	memset(hws, 0, sizeof(hw_regs_t *) * MAX_HWIFS);
+
+	for (i = 0; i < ARRAY_SIZE(legacy_bases); i++) {
+		io_addr = legacy_bases[i];
 
 		hws[i] = NULL;
 
@@ -117,7 +139,11 @@ static int __init ide_generic_init(void)
 
 			memset(&hw[i], 0, sizeof(hw[i]));
 			ide_std_init_ports(&hw[i], io_addr, io_addr + 0x206);
-			hw[i].irq = ide_default_irq(io_addr);
+#ifdef CONFIG_IA64
+			hw[i].irq = isa_irq_to_vector(legacy_irqs[i]);
+#else
+			hw[i].irq = legacy_irqs[i];
+#endif
 			hw[i].chipset = ide_generic;
 
 			hws[i] = &hw[i];
diff --git a/include/asm-alpha/ide.h b/include/asm-alpha/ide.h
index f44129abc02..55f9f687024 100644
--- a/include/asm-alpha/ide.h
+++ b/include/asm-alpha/ide.h
@@ -13,30 +13,6 @@
 
 #ifdef __KERNEL__
 
-static inline int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-		case 0x1f0: return 14;
-		case 0x170: return 15;
-		case 0x1e8: return 11;
-		case 0x168: return 10;
-		default:
-			return 0;
-	}
-}
-
-static inline unsigned long ide_default_io_base(int index)
-{
-	switch (index) {
-		case 0:	return 0x1f0;
-		case 1:	return 0x170;
-		case 2: return 0x1e8;
-		case 3: return 0x168;
-		default:
-			return 0;
-	}
-}
-
 #include <asm-generic/ide_iops.h>
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-ia64/ide.h b/include/asm-ia64/ide.h
index 8fa3f8cd067..5a0aedea476 100644
--- a/include/asm-ia64/ide.h
+++ b/include/asm-ia64/ide.h
@@ -13,37 +13,8 @@
 
 #ifdef __KERNEL__
 
-
 #include <linux/irq.h>
 
-static inline int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-	      case 0x1f0: return isa_irq_to_vector(14);
-	      case 0x170: return isa_irq_to_vector(15);
-	      case 0x1e8: return isa_irq_to_vector(11);
-	      case 0x168: return isa_irq_to_vector(10);
-	      case 0x1e0: return isa_irq_to_vector(8);
-	      case 0x160: return isa_irq_to_vector(12);
-	      default:
-		return 0;
-	}
-}
-
-static inline unsigned long ide_default_io_base(int index)
-{
-	switch (index) {
-	      case 0: return 0x1f0;
-	      case 1: return 0x170;
-	      case 2: return 0x1e8;
-	      case 3: return 0x168;
-	      case 4: return 0x1e0;
-	      case 5: return 0x160;
-	      default:
-		return 0;
-	}
-}
-
 #include <asm-generic/ide_iops.h>
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
index d755d41b993..0f1ec697387 100644
--- a/include/asm-m32r/ide.h
+++ b/include/asm-m32r/ide.h
@@ -13,56 +13,6 @@
 
 #ifdef __KERNEL__
 
-#include <asm/m32r.h>
-
-static __inline__ int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) \
-	|| defined(CONFIG_PLAT_OPSPUT)
-		case 0x1f0: return PLD_IRQ_CFIREQ;
-		default:
-			return 0;
-#elif defined(CONFIG_PLAT_MAPPI3)
-		case 0x1f0: return PLD_IRQ_CFIREQ;
-		case 0x170: return PLD_IRQ_IDEIREQ;
-		default:
-			return 0;
-#else
-		case 0x1f0: return 14;
-		case 0x170: return 15;
-		case 0x1e8: return 11;
-		case 0x168: return 10;
-		case 0x1e0: return 8;
-		case 0x160: return 12;
-		default:
-			return 0;
-#endif
-	}
-}
-
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-	switch (index) {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) \
-	|| defined(CONFIG_PLAT_OPSPUT)
-		case 0:	return 0x1f0;
-#elif defined(CONFIG_PLAT_MAPPI3)
-		case 0:	return 0x1f0;
-		case 1:	return 0x170;
-#else
-		case 0:	return 0x1f0;
-		case 1:	return 0x170;
-		case 2: return 0x1e8;
-		case 3: return 0x168;
-		case 4: return 0x1e0;
-		case 5: return 0x160;
-#endif
-		default:
-			return 0;
-	}
-}
-
 #include <asm-generic/ide_iops.h>
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
index 8ee6bff030d..73008f7bdc9 100644
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -48,34 +48,6 @@ found:
 #endif
 }
 
-static __inline__ int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-		case 0x1f0: return 14;
-		case 0x170: return 15;
-		case 0x1e8: return 11;
-		case 0x168: return 10;
-		case 0x1e0: return 8;
-		case 0x160: return 12;
-		default:
-			return 0;
-	}
-}
-
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-	switch (index) {
-	case 0: return 0x1f0;
-	case 1: return 0x170;
-	case 2: return 0x1e8;
-	case 3: return 0x168;
-	case 4: return 0x1e0;
-	case 5: return 0x160;
-	default:
-		return 0;
-	}
-}
-
 /* MIPS port and memory-mapped I/O string operations.  */
 static inline void __ide_flush_prologue(void)
 {
diff --git a/include/asm-x86/ide.h b/include/asm-x86/ide.h
index bc54879daed..0289baf9ce0 100644
--- a/include/asm-x86/ide.h
+++ b/include/asm-x86/ide.h
@@ -11,34 +11,6 @@
 
 #ifdef __KERNEL__
 
-static __inline__ int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-		case 0x1f0: return 14;
-		case 0x170: return 15;
-		case 0x1e8: return 11;
-		case 0x168: return 10;
-		case 0x1e0: return 8;
-		case 0x160: return 12;
-		default:
-			return 0;
-	}
-}
-
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-	switch (index) {
-		case 0:	return 0x1f0;
-		case 1:	return 0x170;
-		case 2: return 0x1e8;
-		case 3: return 0x168;
-		case 4: return 0x1e0;
-		case 5: return 0x160;
-		default:
-			return 0;
-	}
-}
-
 #include <asm-generic/ide_iops.h>
 
 #endif /* __KERNEL__ */
-- 
cgit v1.2.3


From 2a8f7450f828eaee49d66f41f99ac2e54f1160a6 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:31 +0200
Subject: ide: remove <asm/ide.h> for some archs

* Remove <linux/irq.h> include from <asm-ia64.h> (<linux/ide.h> includes
  <linux/interrupt.h> which is enough).

* Remove <asm/ide.h> for alpha/blackfin/h8300/ia64/m32r/sh/x86/xtensa
  (this leaves us with arm/frv/m68k/mips/mn10300/parisc/powerpc/sparc[64]).

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/asm-alpha/ide.h    | 20 --------------------
 include/asm-blackfin/ide.h | 25 -------------------------
 include/asm-h8300/ide.h    | 24 ------------------------
 include/asm-ia64/ide.h     | 22 ----------------------
 include/asm-m32r/ide.h     | 20 --------------------
 include/asm-sh/ide.h       | 21 ---------------------
 include/asm-x86/ide.h      | 18 ------------------
 include/asm-xtensa/ide.h   | 21 ---------------------
 include/linux/ide.h        |  6 ++++++
 9 files changed, 6 insertions(+), 171 deletions(-)
 delete mode 100644 include/asm-alpha/ide.h
 delete mode 100644 include/asm-blackfin/ide.h
 delete mode 100644 include/asm-h8300/ide.h
 delete mode 100644 include/asm-ia64/ide.h
 delete mode 100644 include/asm-m32r/ide.h
 delete mode 100644 include/asm-sh/ide.h
 delete mode 100644 include/asm-x86/ide.h
 delete mode 100644 include/asm-xtensa/ide.h

diff --git a/include/asm-alpha/ide.h b/include/asm-alpha/ide.h
deleted file mode 100644
index 55f9f687024..00000000000
--- a/include/asm-alpha/ide.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-alpha/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the alpha architecture specific IDE code.
- */
-
-#ifndef __ASMalpha_IDE_H
-#define __ASMalpha_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMalpha_IDE_H */
diff --git a/include/asm-blackfin/ide.h b/include/asm-blackfin/ide.h
deleted file mode 100644
index 90bc50bd22e..00000000000
--- a/include/asm-blackfin/ide.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/****************************************************************************/
-
-/*
- *  linux/include/asm-blackfin/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- *  Copyright (C) 2001       Lineo Inc., davidm@snapgear.com
- *  Copyright (C) 2002       Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 2002       Yoshinori Sato (ysato@users.sourceforge.jp)
- *  Copyright (C) 2005       Hennerich Michael (hennerich@blackfin.uclinux.org)
- */
-
-/****************************************************************************/
-#ifndef _BLACKFIN_IDE_H
-#define _BLACKFIN_IDE_H
-/****************************************************************************/
-#ifdef __KERNEL__
-/****************************************************************************/
-
-#include <asm-generic/ide_iops.h>
-
-/****************************************************************************/
-#endif				/* __KERNEL__ */
-#endif				/* _BLACKFIN_IDE_H */
-/****************************************************************************/
diff --git a/include/asm-h8300/ide.h b/include/asm-h8300/ide.h
deleted file mode 100644
index 8f79ba2ff92..00000000000
--- a/include/asm-h8300/ide.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/****************************************************************************/
-
-/*
- *  linux/include/asm-h8300/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- *  Copyright (C) 2001       Lineo Inc., davidm@snapgear.com
- *  Copyright (C) 2002       Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 2002       Yoshinori Sato (ysato@users.sourceforge.jp)
- */
-
-/****************************************************************************/
-#ifndef _H8300_IDE_H
-#define _H8300_IDE_H
-/****************************************************************************/
-#ifdef __KERNEL__
-/****************************************************************************/
-
-#include <asm-generic/ide_iops.h>
-
-/****************************************************************************/
-#endif /* __KERNEL__ */
-#endif /* _H8300_IDE_H */
-/****************************************************************************/
diff --git a/include/asm-ia64/ide.h b/include/asm-ia64/ide.h
deleted file mode 100644
index 5a0aedea476..00000000000
--- a/include/asm-ia64/ide.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  linux/include/asm-ia64/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the ia64 architecture specific IDE code.
- */
-
-#ifndef __ASM_IA64_IDE_H
-#define __ASM_IA64_IDE_H
-
-#ifdef __KERNEL__
-
-#include <linux/irq.h>
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_IA64_IDE_H */
diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
deleted file mode 100644
index 0f1ec697387..00000000000
--- a/include/asm-m32r/ide.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_M32R_IDE_H
-#define _ASM_M32R_IDE_H
-
-/*
- *  linux/include/asm-m32r/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the i386 architecture specific IDE code.
- */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_IDE_H */
diff --git a/include/asm-sh/ide.h b/include/asm-sh/ide.h
deleted file mode 100644
index 58e0bdd52be..00000000000
--- a/include/asm-sh/ide.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-sh/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the i386 architecture specific IDE code.
- *  In future, SuperH code.
- */
-
-#ifndef __ASM_SH_IDE_H
-#define __ASM_SH_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_IDE_H */
diff --git a/include/asm-x86/ide.h b/include/asm-x86/ide.h
deleted file mode 100644
index 0289baf9ce0..00000000000
--- a/include/asm-x86/ide.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the i386 architecture specific IDE code.
- */
-
-#ifndef __ASMi386_IDE_H
-#define __ASMi386_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMi386_IDE_H */
diff --git a/include/asm-xtensa/ide.h b/include/asm-xtensa/ide.h
deleted file mode 100644
index 18342a2cc77..00000000000
--- a/include/asm-xtensa/ide.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-xtensa/ide.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994 - 1996  Linus Torvalds & authors
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_IDE_H
-#define _XTENSA_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm-generic/ide_iops.h>
-
-#endif	/* __KERNEL__ */
-
-#endif	/* _XTENSA_IDE_H */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 76fe00b24b5..fd78b401b03 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -211,7 +211,13 @@ static inline int __ide_default_irq(unsigned long base)
 	return 0;
 }
 
+#if defined(CONFIG_ARM) || defined(CONFIG_FRV) || defined(CONFIG_M68K) || \
+    defined(CONFIG_MIPS) || defined(CONFIG_MN10300) || defined(CONFIG_PARISC) \
+    || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || defined(CONFIG_SPARC64)
 #include <asm/ide.h>
+#else
+#include <asm-generic/ide_iops.h>
+#endif
 
 #ifndef MAX_HWIFS
 #if defined(CONFIG_BLACKFIN) || defined(CONFIG_H8300) || defined(CONFIG_XTENSA)
-- 
cgit v1.2.3


From 28cfd8af52a9ed4e5bd1751ea6bc0b8c870f68ec Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:31 +0200
Subject: ide: include PCI device name in messages from IDE PCI host drivers

While at it:

* Apply small fixes to messages (s/dma/DMA/, remove trailing '.', etc).

* Fix printk() call in ide_setup_pci_baseregs() to use KERN_INFO.

* Move printk() call from ide_pci_clear_simplex() to the caller.

* Cleanup do_ide_setup_pci_device() a bit.

* amd74xx.c: remove superfluous PCI device revision information.

* hpt366.c: fix two printk() calls in ->init_chipset to use KERN_INFO.

* pdc202xx_new.c: fix printk() call in ->init_chipset to use KERN_INFO.

* pdc202xx_old.c: fix driver message in pdc202xx_init_one().

* via82cxxx.c: fix driver warning message in via_init_one().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/amd74xx.c      | 11 +++--
 drivers/ide/pci/generic.c      |  4 +-
 drivers/ide/pci/hpt366.c       | 31 ++++++++-----
 drivers/ide/pci/it821x.c       | 11 +++--
 drivers/ide/pci/pdc202xx_new.c | 21 +++++----
 drivers/ide/pci/pdc202xx_old.c |  9 ++--
 drivers/ide/pci/serverworks.c  |  3 +-
 drivers/ide/pci/siimage.c      |  7 +--
 drivers/ide/pci/sis5513.c      | 17 +++++---
 drivers/ide/pci/trm290.c       |  4 +-
 drivers/ide/pci/via82cxxx.c    | 13 +++---
 drivers/ide/setup-pci.c        | 99 ++++++++++++++++++++++++------------------
 12 files changed, 131 insertions(+), 99 deletions(-)

diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index a91f2e873ba..2b118f80fab 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -129,9 +129,9 @@ static void __devinit amd7411_cable_detect(struct pci_dev *dev,
 	amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
 	for (i = 24; i >= 0; i -= 8)
 		if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
-			printk(KERN_WARNING "%s: BIOS didn't set cable bits "
-					    "correctly. Enabling workaround.\n",
-					    name);
+			printk(KERN_WARNING "%s %s: BIOS didn't set cable bits "
+				"correctly. Enabling workaround.\n",
+				name, pci_name(dev));
 			amd_80w |= (1 << (1 - (i >> 4)));
 		}
 }
@@ -280,9 +280,8 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_
 			d.udma_mask = ATA_UDMA5;
 	}
 
-	printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
-			 d.name, pci_name(dev), dev->revision,
-			 amd_dma[fls(d.udma_mask) - 1]);
+	printk(KERN_INFO "%s %s: UDMA%s controller\n",
+		d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
 
 	/*
 	* Determine the system bus clock.
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 81fc171f8ff..e034e21af7f 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -134,8 +134,8 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi
 		u16 command;
 		pci_read_config_word(dev, PCI_COMMAND, &command);
 		if (!(command & PCI_COMMAND_IO)) {
-			printk(KERN_INFO "Skipping disabled %s IDE "
-					"controller.\n", d->name);
+			printk(KERN_INFO "%s %s: skipping disabled "
+				"controller\n", d->name, pci_name(dev));
 			goto out;
 		}
 	}
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 398808905f9..b8004c331ed 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1044,8 +1044,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 		if ((temp & 0xFFFFF000) != 0xABCDE000) {
 			int i;
 
-			printk(KERN_WARNING "%s: no clock data saved by BIOS\n",
-			       name);
+			printk(KERN_WARNING "%s %s: no clock data saved by "
+				"BIOS\n", name, pci_name(dev));
 
 			/* Calculate the average value of f_CNT. */
 			for (temp = i = 0; i < 128; i++) {
@@ -1070,8 +1070,9 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 		else
 			pci_clk = 66;
 
-		printk(KERN_INFO "%s: DPLL base: %d MHz, f_CNT: %d, "
-		       "assuming %d MHz PCI\n", name, dpll_clk, f_cnt, pci_clk);
+		printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, "
+			"assuming %d MHz PCI\n", name, pci_name(dev),
+			dpll_clk, f_cnt, pci_clk);
 	} else {
 		u32 itr1 = 0;
 
@@ -1137,7 +1138,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 		}
 
 		if (info->timings->clock_table[clock] == NULL) {
-			printk(KERN_ERR "%s: unknown bus timing!\n", name);
+			printk(KERN_ERR "%s %s: unknown bus timing!\n",
+				name, pci_name(dev));
 			return -EIO;
 		}
 
@@ -1163,16 +1165,19 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 				f_low += adjust >> 1;
 		}
 		if (adjust == 8) {
-			printk(KERN_ERR "%s: DPLL did not stabilize!\n", name);
+			printk(KERN_ERR "%s %s: DPLL did not stabilize!\n",
+				name, pci_name(dev));
 			return -EIO;
 		}
 
-		printk("%s: using %d MHz DPLL clock\n", name, dpll_clk);
+		printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n",
+			name, pci_name(dev), dpll_clk);
 	} else {
 		/* Mark the fact that we're not using the DPLL. */
 		dpll_clk = 0;
 
-		printk("%s: using %d MHz PCI clock\n", name, pci_clk);
+		printk(KERN_INFO "%s %s: using %d MHz PCI clock\n",
+			name, pci_name(dev), pci_clk);
 	}
 
 	/* Store the clock frequencies. */
@@ -1357,7 +1362,8 @@ static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
 	if (dev2->irq != dev->irq) {
 		/* FIXME: we need a core pci_set_interrupt() */
 		dev2->irq = dev->irq;
-		printk(KERN_INFO "HPT374: PCI config space interrupt fixed\n");
+		printk(KERN_INFO "HPT374 %s: PCI config space interrupt "
+			"fixed\n", pci_name(dev2));
 	}
 }
 
@@ -1392,8 +1398,8 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
 	pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
 
 	if (pin1 != pin2 && dev->irq == dev2->irq) {
-		printk(KERN_INFO "HPT36x: onboard version of chipset, "
-				 "pin1=%d pin2=%d\n", pin1, pin2);
+		printk(KERN_INFO "HPT36x %s: onboard version of chipset, "
+			"pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2);
 		return 1;
 	}
 
@@ -1591,7 +1597,8 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
 
 	dyn_info = kzalloc(sizeof(*dyn_info) * (dev2 ? 2 : 1), GFP_KERNEL);
 	if (dyn_info == NULL) {
-		printk(KERN_ERR "%s: out of memory!\n", d.name);
+		printk(KERN_ERR "%s %s: out of memory!\n",
+			d.name, pci_name(dev));
 		pci_dev_put(dev2);
 		return -ENOMEM;
 	}
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index c5c91f2109d..4ce5db98f89 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -569,7 +569,8 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 		idev->timing10 = 1;
 		hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
 		if (idev->smart == 0)
-			printk(KERN_WARNING "it821x: Revision 0x10, workarounds activated.\n");
+			printk(KERN_WARNING "it821x %s: revision 0x10, "
+				"workarounds activated\n", pci_name(dev));
 	}
 
 	if (idev->smart == 0) {
@@ -609,11 +610,13 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha
 
 	/* Force the card into bypass mode if so requested */
 	if (it8212_noraid) {
-		printk(KERN_INFO "it8212: forcing bypass mode.\n");
+		printk(KERN_INFO "it821x %s: forcing bypass mode\n",
+			pci_name(dev));
 		it8212_disable_raid(dev);
 	}
 	pci_read_config_byte(dev, 0x50, &conf);
-	printk(KERN_INFO "it821x: controller in %s mode.\n", mode[conf & 1]);
+	printk(KERN_INFO "it821x %s: controller in %s mode\n",
+		pci_name(dev), mode[conf & 1]);
 	return 0;
 }
 
@@ -654,7 +657,7 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic
 
 	itdevs = kzalloc(2 * sizeof(*itdevs), GFP_KERNEL);
 	if (itdevs == NULL) {
-		printk(KERN_ERR "it821x: out of memory\n");
+		printk(KERN_ERR "it821x %s: out of memory\n", pci_name(dev));
 		return -ENOMEM;
 	}
 
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 9881a1a8b89..4c2b669d7de 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -358,12 +358,13 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
 	 * registers setting.
 	 */
 	pll_input = detect_pll_input_clock(dma_base);
-	printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000);
+	printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n",
+		name, pci_name(dev), pll_input / 1000);
 
 	/* Sanity check */
 	if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
-		printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n",
-		       name, pll_input);
+		printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!"
+			"\n", name, pci_name(dev), pll_input);
 		goto out;
 	}
 
@@ -399,7 +400,8 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
 		r = 0x00;
 	} else {
 		/* Invalid ratio */
-		printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio);
+		printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n",
+			name, pci_name(dev), ratio);
 		goto out;
 	}
 
@@ -409,7 +411,8 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
 
 	if (unlikely(f < 0 || f > 127)) {
 		/* Invalid F */
-		printk(KERN_ERR "%s: F[%d] invalid!\n", name, f);
+		printk(KERN_ERR "%s %s: F[%d] invalid!\n",
+			name, pci_name(dev), f);
 		goto out;
 	}
 
@@ -455,8 +458,8 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
 
 		if (dev2->irq != dev->irq) {
 			dev2->irq = dev->irq;
-			printk(KERN_INFO "PDC20270: PCI config space "
-					 "interrupt fixed\n");
+			printk(KERN_INFO "PDC20270 %s: PCI config space "
+				"interrupt fixed\n", pci_name(dev));
 		}
 
 		return dev2;
@@ -535,8 +538,8 @@ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_de
 	    bridge->vendor == PCI_VENDOR_ID_INTEL &&
 	    (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
 	     bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
-		printk(KERN_INFO "PDC20276: attached to I2O RAID controller, "
-				 "skipping\n");
+		printk(KERN_INFO "PDC20276 %s: attached to I2O RAID controller,"
+			" skipping\n", pci_name(dev));
 		return -ENODEV;
 	}
 
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 17d99ce273a..5cb2731047e 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -304,8 +304,8 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
 		if (irq != irq2) {
 			pci_write_config_byte(dev,
 				(PCI_INTERRUPT_LINE)|0x80, irq);     /* 0xbc */
-			printk(KERN_INFO "%s: PCI config space interrupt "
-					 "mirror fixed\n", name);
+			printk(KERN_INFO "%s %s: PCI config space interrupt "
+				"mirror fixed\n", name, pci_name(dev));
 		}
 	}
 }
@@ -406,8 +406,9 @@ static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_dev
 		    bridge->vendor == PCI_VENDOR_ID_INTEL &&
 		    (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
 		     bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
-			printk(KERN_INFO "ide: Skipping Promise PDC20265 "
-				"attached to I2O RAID controller\n");
+			printk(KERN_INFO "pdc202xx_old %s: skipping Promise "
+				"PDC20265 attached to I2O RAID controller\n",
+				pci_name(dev));
 			return -ENODEV;
 		}
 	}
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index eca52fede28..1106ff44cde 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -188,7 +188,8 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
 			pci_read_config_dword(isa_dev, 0x64, &reg);
 			reg &= ~0x00002000; /* disable 600ns interrupt mask */
 			if(!(reg & 0x00004000))
-				printk(KERN_DEBUG "%s: UDMA not BIOS enabled.\n", name);
+				printk(KERN_DEBUG "%s %s: UDMA not BIOS "
+					"enabled.\n", name, pci_name(dev));
 			reg |=  0x00004000; /* enable UDMA/33 support */
 			pci_write_config_dword(isa_dev, 0x64, reg);
 		}
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index f2e4dac9b71..fc29f1ca503 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -539,7 +539,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
 			{ "== 100", "== 133", "== 2X PCI", "DISABLED!" };
 
 		tmp >>= 4;
-		printk(KERN_INFO "%s: BASE CLOCK %s\n", name, clk_str[tmp & 3]);
+		printk(KERN_INFO "%s %s: BASE CLOCK %s\n",
+			name, pci_name(dev), clk_str[tmp & 3]);
 	}
 
 	return 0;
@@ -779,8 +780,8 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 		* seem to get terminally confused in the PCI spaces.
 		*/
 		if (!request_mem_region(bar5, barsize, d.name)) {
-			printk(KERN_WARNING "siimage: IDE controller MMIO "
-					    "ports not available.\n");
+			printk(KERN_WARNING "siimage %s: MMIO ports not "
+				"available\n", pci_name(dev));
 		} else {
 			ioaddr = ioremap(bar5, barsize);
 			if (ioaddr == NULL)
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index f3cf7c6c0cc..518d8ab413f 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -380,8 +380,9 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 		}
 		pci_dev_put(host);
 
-		printk(KERN_INFO "SIS5513: %s %s controller\n",
-			 SiSHostChipInfo[i].name, chipset_capability[chipset_family]);
+		printk(KERN_INFO "SIS5513 %s: %s %s controller\n",
+			pci_name(dev), SiSHostChipInfo[i].name,
+			chipset_capability[chipset_family]);
 	}
 
 	if (!chipset_family) { /* Belongs to pci-quirks */
@@ -396,7 +397,8 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 			pci_write_config_dword(dev, 0x54, idemisc);
 
 			if (trueid == 0x5518) {
-				printk(KERN_INFO "SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller\n");
+				printk(KERN_INFO "SIS5513 %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
+					pci_name(dev));
 				chipset_family = ATA_133;
 
 				/* Check for 5513 compability mapping
@@ -405,7 +407,8 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 				 */
 				if ((idemisc & 0x40000000) == 0) {
 					pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
-					printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
+					printk(KERN_INFO "SIS5513 %s: Switching to 5513 register mapping\n",
+						pci_name(dev));
 				}
 			}
 	}
@@ -429,10 +432,12 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 				pci_dev_put(lpc_bridge);
 
 				if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
-					printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
+					printk(KERN_INFO "SIS5513 %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
+						pci_name(dev));
 					chipset_family = ATA_133a;
 				} else {
-					printk(KERN_INFO "SIS5513: SiS 961 MuTIOL IDE UDMA100 controller\n");
+					printk(KERN_INFO "SIS5513 %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
+						pci_name(dev));
 					chipset_family = ATA_100;
 				}
 			}
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 449f4de9a70..7bda5ed92e1 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -245,10 +245,10 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
 	u8 reg = 0;
 
 	if ((dev->class & 5) && cfg_base)
-		printk(KERN_INFO "TRM290: chip");
+		printk(KERN_INFO "TRM290 %s: chip", pci_name(dev));
 	else {
 		cfg_base = 0x3df0;
-		printk(KERN_INFO "TRM290: using default");
+		printk(KERN_INFO "TRM290 %s: using default", pci_name(dev));
 	}
 	printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
 	hwif->config_data = cfg_base;
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 5f07eeb736a..23332556e61 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -401,20 +401,19 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 	 */
 	via_config = via_config_find(&isa);
 	if (!via_config->id) {
-		printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
+		printk(KERN_WARNING "VP_IDE %s: unknown chipset, skipping\n",
+			pci_name(dev));
 		return -ENODEV;
 	}
 
 	/*
 	 * Print the boot message.
 	 */
-	printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
-		"controller on pci%s\n",
-		via_config->name, isa->revision,
+	printk(KERN_INFO "VP_IDE %s: VIA %s (rev %02x) IDE %sDMA%s\n",
+		pci_name(dev), via_config->name, isa->revision,
 		via_config->udma_mask ? "U" : "MW",
 		via_dma[via_config->udma_mask ?
-			(fls(via_config->udma_mask) - 1) : 0],
-		pci_name(dev));
+			(fls(via_config->udma_mask) - 1) : 0]);
 
 	pci_dev_put(isa);
 
@@ -454,7 +453,7 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 
 	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
 	if (!vdev) {
-		printk(KERN_ERR "VP_IDE: out of memory :(\n");
+		printk(KERN_ERR "VP_IDE %s: out of memory :(\n", pci_name(dev));
 		return -ENOMEM;
 	}
 
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 20f0ee00469..d9655aeb013 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -39,17 +39,18 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
 	if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
 			 (progif & 5) != 5) {
 		if ((progif & 0xa) != 0xa) {
-			printk(KERN_INFO "%s: device not capable of full "
-				"native PCI mode\n", name);
+			printk(KERN_INFO "%s %s: device not capable of full "
+				"native PCI mode\n", name, pci_name(dev));
 			return -EOPNOTSUPP;
 		}
-		printk("%s: placing both ports into native PCI mode\n", name);
+		printk(KERN_INFO "%s %s: placing both ports into native PCI "
+			"mode\n", name, pci_name(dev));
 		(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
 		if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
 		    (progif & 5) != 5) {
-			printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted "
-				"0x%04x, got 0x%04x\n",
-				name, progif|5, progif);
+			printk(KERN_ERR "%s %s: rewrite of PROGIF failed, "
+				"wanted 0x%04x, got 0x%04x\n",
+				name, pci_name(dev), progif | 5, progif);
 			return -EOPNOTSUPP;
 		}
 	}
@@ -57,14 +58,14 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
+static int ide_pci_clear_simplex(unsigned long dma_base, const char *name)
 {
 	u8 dma_stat = inb(dma_base + 2);
 
 	outb(dma_stat & 0x60, dma_base + 2);
 	dma_stat = inb(dma_base + 2);
-	if (dma_stat & 0x80)
-		printk(KERN_INFO "%s: simplex device: DMA forced\n", name);
+
+	return (dma_stat & 0x80) ? 1 : 0;
 }
 
 /**
@@ -91,7 +92,8 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
 		dma_base = pci_resource_start(dev, baridx);
 
 		if (dma_base == 0) {
-			printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
+			printk(KERN_ERR "%s %s: DMA base is invalid\n",
+				d->name, pci_name(dev));
 			return 0;
 		}
 	}
@@ -105,13 +107,16 @@ EXPORT_SYMBOL_GPL(ide_pci_dma_base);
 
 int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 dma_stat;
 
 	if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
 		goto out;
 
 	if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
-		ide_pci_clear_simplex(hwif->dma_base, d->name);
+		if (ide_pci_clear_simplex(hwif->dma_base, d->name))
+			printk(KERN_INFO "%s %s: simplex device: DMA forced\n",
+				d->name, pci_name(dev));
 		goto out;
 	}
 
@@ -127,7 +132,8 @@ int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
 	 */
 	dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
 	if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
-		printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
+		printk(KERN_INFO "%s %s: simplex device: DMA disabled\n",
+			d->name, pci_name(dev));
 		return -1;
 	}
 out:
@@ -149,8 +155,8 @@ int ide_pci_set_master(struct pci_dev *dev, const char *name)
 
 		if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) ||
 		    (pcicmd & PCI_COMMAND_MASTER) == 0) {
-			printk(KERN_ERR "%s: error updating PCICMD on %s\n",
-					name, pci_name(dev));
+			printk(KERN_ERR "%s %s: error updating PCICMD\n",
+				name, pci_name(dev));
 			return -EIO;
 		}
 	}
@@ -162,9 +168,9 @@ EXPORT_SYMBOL_GPL(ide_pci_set_master);
 
 void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
 {
-	printk(KERN_INFO "%s: IDE controller (0x%04x:0x%04x rev 0x%02x) at "
-			 " PCI slot %s\n", d->name, dev->vendor, dev->device,
-			 dev->revision, pci_name(dev));
+	printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n",
+		d->name, pci_name(dev),
+		dev->vendor, dev->device, dev->revision);
 }
 EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
 
@@ -189,11 +195,12 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
 	if (pci_enable_device(dev)) {
 		ret = pci_enable_device_io(dev);
 		if (ret < 0) {
-			printk(KERN_WARNING "%s: (ide_setup_pci_device:) "
-				"Could not enable device.\n", d->name);
+			printk(KERN_WARNING "%s %s: couldn't enable device\n",
+				d->name, pci_name(dev));
 			goto out;
 		}
-		printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name);
+		printk(KERN_WARNING "%s %s: BIOS configuration fixed\n",
+			d->name, pci_name(dev));
 	}
 
 	/*
@@ -203,7 +210,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
 	 */
 	ret = pci_set_dma_mask(dev, DMA_32BIT_MASK);
 	if (ret < 0) {
-		printk(KERN_ERR "%s: can't set dma mask\n", d->name);
+		printk(KERN_ERR "%s %s: can't set DMA mask\n",
+			d->name, pci_name(dev));
 		goto out;
 	}
 
@@ -221,7 +229,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
 
 	ret = pci_request_selected_regions(dev, bars, d->name);
 	if (ret < 0)
-		printk(KERN_ERR "%s: can't reserve resources\n", d->name);
+		printk(KERN_ERR "%s %s: can't reserve resources\n",
+			d->name, pci_name(dev));
 out:
 	return ret;
 }
@@ -247,15 +256,18 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d)
 	 */
 	if (ide_setup_pci_baseregs(dev, d->name) ||
 	    pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) {
-		printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name);
+		printk(KERN_INFO "%s %s: device disabled (BIOS)\n",
+			d->name, pci_name(dev));
 		return -ENODEV;
 	}
 	if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
-		printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+		printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+			d->name, pci_name(dev));
 		return -EIO;
 	}
 	if (!(pcicmd & PCI_COMMAND_IO)) {
-		printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name);
+		printk(KERN_ERR "%s %s: unable to enable IDE controller\n",
+			d->name, pci_name(dev));
 		return -ENXIO;
 	}
 	return 0;
@@ -311,8 +323,9 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
 	if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
 		if (ide_pci_check_iomem(dev, d, 2 * port) ||
 		    ide_pci_check_iomem(dev, d, 2 * port + 1)) {
-			printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported "
-					"as MEM for port %d!\n", d->name, port);
+			printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are "
+				"reported as MEM for port %d!\n",
+				d->name, pci_name(dev), port);
 			return -EINVAL;
 		}
 
@@ -325,8 +338,8 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
 	}
 
 	if (!base || !ctl) {
-		printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n",
-				d->name, port);
+		printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n",
+			d->name, pci_name(dev), port);
 		return -EINVAL;
 	}
 
@@ -414,14 +427,16 @@ static int ide_setup_pci_controller(struct pci_dev *dev,
 
 	ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
 	if (ret < 0) {
-		printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+		printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+			d->name, pci_name(dev));
 		goto out;
 	}
 	if (!(pcicmd & PCI_COMMAND_IO)) {	/* is device disabled? */
 		ret = ide_pci_configure(dev, d);
 		if (ret < 0)
 			goto out;
-		printk(KERN_INFO "%s: device enabled (Linux)\n", d->name);
+		printk(KERN_INFO "%s %s: device enabled (Linux)\n",
+			d->name, pci_name(dev));
 	}
 
 out:
@@ -460,7 +475,8 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
 
 		if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
 		    (tmp & e->mask) != e->val)) {
-			printk(KERN_INFO "%s: IDE port disabled\n", d->name);
+			printk(KERN_INFO "%s %s: IDE port disabled\n",
+				d->name, pci_name(dev));
 			continue;	/* port not enabled */
 		}
 
@@ -506,18 +522,15 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 	/* Is it an "IDE storage" device in non-PCI mode? */
 	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) {
 		if (noisy)
-			printk(KERN_INFO "%s: not 100%% native mode: "
-				"will probe irqs later\n", d->name);
+			printk(KERN_INFO "%s %s: not 100%% native mode: will "
+				"probe irqs later\n", d->name, pci_name(dev));
 		pciirq = ret;
-	} else if (!pciirq) {
-		if (noisy)
-			printk(KERN_WARNING "%s: bad irq (%d): will probe later\n",
-				d->name, pciirq);
-		pciirq = 0;
-	} else {
-		if (noisy)
-			printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
-				d->name, pciirq);
+	} else if (!pciirq && noisy) {
+		printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n",
+			d->name, pci_name(dev), pciirq);
+	} else if (noisy) {
+		printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n",
+			d->name, pci_name(dev), pciirq);
 	}
 
 	ret = pciirq;
-- 
cgit v1.2.3


From 29f1ca920cb8d65b979f7edf2fc7d11095461306 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:32 +0200
Subject: it8213: remove DECLARE_ITE_DEV() macro

While at it:

* it8213_chipsets[] -> it8213_chipset.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/it8213.c | 26 ++++++++++----------------
 1 file changed, 10 insertions(+), 16 deletions(-)

diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 575bf2386f8..451b87fd821 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -155,23 +155,17 @@ static const struct ide_port_ops it8213_port_ops = {
 	.cable_detect		= it8213_cable_detect,
 };
 
-#define DECLARE_ITE_DEV(name_str)			\
-	{						\
-		.name		= name_str,		\
-		.enablebits	= { {0x41, 0x80, 0x80} }, \
-		.port_ops	= &it8213_port_ops,	\
-		.host_flags	= IDE_HFLAG_SINGLE,	\
-		.pio_mask	= ATA_PIO4,		\
-		.swdma_mask	= ATA_SWDMA2_ONLY,	\
-		.mwdma_mask	= ATA_MWDMA12_ONLY,	\
-		.udma_mask	= ATA_UDMA6,		\
-	}
-
-static const struct ide_port_info it8213_chipsets[] __devinitdata = {
-	/* 0 */ DECLARE_ITE_DEV("IT8213"),
+static const struct ide_port_info it8213_chipset __devinitdata = {
+	.name		= "IT8213",
+	.enablebits	= { {0x41, 0x80, 0x80} },
+	.port_ops	= &it8213_port_ops,
+	.host_flags	= IDE_HFLAG_SINGLE,
+	.pio_mask	= ATA_PIO4,
+	.swdma_mask	= ATA_SWDMA2_ONLY,
+	.mwdma_mask	= ATA_MWDMA12_ONLY,
+	.udma_mask	= ATA_UDMA6,
 };
 
-
 /**
  *	it8213_init_one	-	pci layer discovery entry
  *	@dev: PCI device
@@ -184,7 +178,7 @@ static const struct ide_port_info it8213_chipsets[] __devinitdata = {
 
 static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_pci_init_one(dev, &it8213_chipsets[id->driver_data], NULL);
+	return ide_pci_init_one(dev, &it8213_chipset, NULL);
 }
 
 static const struct pci_device_id it8213_pci_tbl[] = {
-- 
cgit v1.2.3


From 04ba6e739e9c0623c25f94b191fd20dfbd1b26e3 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:32 +0200
Subject: it821x: remove DECLARE_ITE_DEV() macro

While at it:

* it821x_chipsets[] -> it821x_chipset.

* Fix it821x_chipset's name field (as it is used for IT8211/8212).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/it821x.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 4ce5db98f89..a3d8959436c 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -628,17 +628,12 @@ static const struct ide_port_ops it821x_port_ops = {
 	.cable_detect		= it821x_cable_detect,
 };
 
-#define DECLARE_ITE_DEV(name_str)			\
-	{						\
-		.name		= name_str,		\
-		.init_chipset	= init_chipset_it821x,	\
-		.init_hwif	= init_hwif_it821x,	\
-		.port_ops	= &it821x_port_ops,	\
-		.pio_mask	= ATA_PIO4,		\
-	}
-
-static const struct ide_port_info it821x_chipsets[] __devinitdata = {
-	/* 0 */ DECLARE_ITE_DEV("IT8212"),
+static const struct ide_port_info it821x_chipset __devinitdata = {
+	.name		= "IT821X",
+	.init_chipset	= init_chipset_it821x,
+	.init_hwif	= init_hwif_it821x,
+	.port_ops	= &it821x_port_ops,
+	.pio_mask	= ATA_PIO4,
 };
 
 /**
@@ -661,7 +656,7 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic
 		return -ENOMEM;
 	}
 
-	rc = ide_pci_init_one(dev, &it821x_chipsets[id->driver_data], itdevs);
+	rc = ide_pci_init_one(dev, &it821x_chipset, itdevs);
 	if (rc)
 		kfree(itdevs);
 
-- 
cgit v1.2.3


From ced3ec8aa7d0fa3300187ee47c144a22ccfc974e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:32 +0200
Subject: ide: prefix messages from IDE PCI host drivers by driver name

Prefix messages from IDE PCI host drivers by driver name instead of marketed
chipset name (it is still possible to exactly identify the particular chipset
basing on driver messages).

As a bonus this provides nice code savings for some drivers:

   text    data     bss     dec     hex filename
   3826     112       8    3946     f6a drivers/ide/pci/amd74xx.o.before
   2786     112       8    2906     b5a drivers/ide/pci/amd74xx.o.after
    764     108       0     872     368 drivers/ide/pci/cs5520.o.before
    680     108       0     788     314 drivers/ide/pci/cs5520.o.after
   1680     112       4    1796     704 drivers/ide/pci/generic.o.before
   1155     112       4    1271     4f7 drivers/ide/pci/generic.o.after
   7128     792       0    7920    1ef0 drivers/ide/pci/hpt366.o.before
   6984     792       0    7776    1e60 drivers/ide/pci/hpt366.o.after
   2800     148       0    2948     b84 drivers/ide/pci/pdc202xx_new.o.before
   2523     148       0    2671     a6f drivers/ide/pci/pdc202xx_new.o.after
   2831     148       0    2979     ba3 drivers/ide/pci/pdc202xx_old.o.before
   2683     148       0    2831     b0f drivers/ide/pci/pdc202xx_old.o.after
   3776     112       4    3892     f34 drivers/ide/pci/piix.o.before
   2804     112       4    2920     b68 drivers/ide/pci/piix.o.after
   4693     116       0    4809    12c9 drivers/ide/pci/siimage.o.before
   4600     116       0    4716    126c drivers/ide/pci/siimage.o.after

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/aec62xx.c      |  29 ++++++-----
 drivers/ide/pci/alim15x3.c     |   4 +-
 drivers/ide/pci/amd74xx.c      |  86 ++++++++++++++-------------------
 drivers/ide/pci/atiixp.c       |  11 +++--
 drivers/ide/pci/cmd64x.c       |  21 ++++----
 drivers/ide/pci/cs5520.c       |  24 ++++------
 drivers/ide/pci/cs5530.c       |   4 +-
 drivers/ide/pci/cs5535.c       |   4 +-
 drivers/ide/pci/cy82c693.c     |   4 +-
 drivers/ide/pci/generic.c      |  65 ++++++++++++-------------
 drivers/ide/pci/hpt34x.c       |  10 ++--
 drivers/ide/pci/hpt366.c       |  65 +++++--------------------
 drivers/ide/pci/it8213.c       |   4 +-
 drivers/ide/pci/it821x.c       |  12 +++--
 drivers/ide/pci/jmicron.c      |   4 +-
 drivers/ide/pci/ns87415.c      |   4 +-
 drivers/ide/pci/opti621.c      |   4 +-
 drivers/ide/pci/pdc202xx_new.c |  38 +++++++--------
 drivers/ide/pci/pdc202xx_old.c |  30 ++++++------
 drivers/ide/pci/piix.c         | 106 ++++++++++++++++++-----------------------
 drivers/ide/pci/rz1000.c       |   4 +-
 drivers/ide/pci/sc1200.c       |   4 +-
 drivers/ide/pci/serverworks.c  |  26 ++++++----
 drivers/ide/pci/siimage.c      |  17 +++----
 drivers/ide/pci/sis5513.c      |  14 +++---
 drivers/ide/pci/sl82c105.c     |   6 ++-
 drivers/ide/pci/slc90e66.c     |   4 +-
 drivers/ide/pci/tc86c001.c     |   4 +-
 drivers/ide/pci/triflex.c      |   4 +-
 drivers/ide/pci/trm290.c       |   8 ++--
 drivers/ide/pci/via82cxxx.c    |  15 +++---
 31 files changed, 308 insertions(+), 327 deletions(-)

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 253299961a1..f6dc6c20f3a 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -13,6 +13,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "aec62xx"
+
 struct chipset_bus_clock_list_entry {
 	u8 xfer_speed;
 	u8 chipset_settings;
@@ -180,8 +182,8 @@ static const struct ide_port_ops atp86x_port_ops = {
 };
 
 static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
-	{	/* 0 */
-		.name		= "AEC6210",
+	{	/* 0: AEC6210 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_aec62xx,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.port_ops	= &atp850_port_ops,
@@ -192,8 +194,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA2,
-	},{	/* 1 */
-		.name		= "AEC6260",
+	},
+	{	/* 1: AEC6260 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_aec62xx,
 		.port_ops	= &atp86x_port_ops,
 		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
@@ -201,8 +204,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA4,
-	},{	/* 2 */
-		.name		= "AEC6260R",
+	},
+	{	/* 2: AEC6260R */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_aec62xx,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.port_ops	= &atp86x_port_ops,
@@ -211,8 +215,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA4,
-	},{	/* 3 */
-		.name		= "AEC6280",
+	},
+	{	/* 3: AEC6280 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_aec62xx,
 		.port_ops	= &atp86x_port_ops,
 		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
@@ -220,8 +225,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
-	},{	/* 4 */
-		.name		= "AEC6280R",
+	},
+	{	/* 4: AEC6280R */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_aec62xx,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.port_ops	= &atp86x_port_ops,
@@ -268,7 +274,8 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
 		unsigned long dma_base = pci_resource_start(dev, 4);
 
 		if (inb(dma_base + 2) & 0x10) {
-			d.name = (idx == 4) ? "AEC6880R" : "AEC6880";
+			printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected"
+				"\n", pci_name(dev), (idx == 4) ? "R" : "");
 			d.udma_mask = ATA_UDMA6;
 		}
 	}
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index ac171502b99..a099c4dd599 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -38,6 +38,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "alim15x3"
+
 /*
  * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
  * (this is DANGEROUS and could result in data corruption).
@@ -515,7 +517,7 @@ static const struct ide_dma_ops ali_dma_ops = {
 };
 
 static const struct ide_port_info ali15x3_chipset __devinitdata = {
-	.name		= "ALI15X3",
+	.name		= DRV_NAME,
 	.init_chipset	= init_chipset_ali15x3,
 	.init_hwif	= init_hwif_ali15x3,
 	.init_dma	= init_dma_ali15x3,
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 2b118f80fab..cbf78edfe00 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -21,6 +21,8 @@
 #include <linux/init.h>
 #include <linux/ide.h>
 
+#define DRV_NAME "amd74xx"
+
 enum {
 	AMD_IDE_CONFIG		= 0x41,
 	AMD_CABLE_DETECT	= 0x42,
@@ -204,9 +206,9 @@ static const struct ide_port_ops amd_port_ops = {
 	 IDE_HFLAG_IO_32BIT | \
 	 IDE_HFLAG_UNMASK_IRQS)
 
-#define DECLARE_AMD_DEV(name_str, swdma, udma)				\
+#define DECLARE_AMD_DEV(swdma, udma)				\
 	{								\
-		.name		= name_str,				\
+		.name		= DRV_NAME,				\
 		.init_chipset	= init_chipset_amd74xx,			\
 		.init_hwif	= init_hwif_amd74xx,			\
 		.enablebits	= {{0x40,0x02,0x02}, {0x40,0x01,0x01}},	\
@@ -218,9 +220,9 @@ static const struct ide_port_ops amd_port_ops = {
 		.udma_mask	= udma,					\
 	}
 
-#define DECLARE_NV_DEV(name_str, udma)					\
+#define DECLARE_NV_DEV(udma)					\
 	{								\
-		.name		= name_str,				\
+		.name		= DRV_NAME,				\
 		.init_chipset	= init_chipset_amd74xx,			\
 		.init_hwif	= init_hwif_amd74xx,			\
 		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x01,0x01}},	\
@@ -233,31 +235,15 @@ static const struct ide_port_ops amd_port_ops = {
 	}
 
 static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
-	/*  0 */ DECLARE_AMD_DEV("AMD7401",	  0x00, ATA_UDMA2),
-	/*  1 */ DECLARE_AMD_DEV("AMD7409", ATA_SWDMA2, ATA_UDMA4),
-	/*  2 */ DECLARE_AMD_DEV("AMD7411", ATA_SWDMA2, ATA_UDMA5),
-	/*  3 */ DECLARE_AMD_DEV("AMD7441", ATA_SWDMA2, ATA_UDMA5),
-	/*  4 */ DECLARE_AMD_DEV("AMD8111", ATA_SWDMA2, ATA_UDMA6),
-
-	/*  5 */ DECLARE_NV_DEV("NFORCE",		ATA_UDMA5),
-	/*  6 */ DECLARE_NV_DEV("NFORCE2",		ATA_UDMA6),
-	/*  7 */ DECLARE_NV_DEV("NFORCE2-U400R",	ATA_UDMA6),
-	/*  8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA",	ATA_UDMA6),
-	/*  9 */ DECLARE_NV_DEV("NFORCE3-150",		ATA_UDMA6),
-	/* 10 */ DECLARE_NV_DEV("NFORCE3-250",		ATA_UDMA6),
-	/* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA",	ATA_UDMA6),
-	/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2",	ATA_UDMA6),
-	/* 13 */ DECLARE_NV_DEV("NFORCE-CK804",		ATA_UDMA6),
-	/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04",		ATA_UDMA6),
-	/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51",		ATA_UDMA6),
-	/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55",		ATA_UDMA6),
-	/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61",		ATA_UDMA6),
-	/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65",		ATA_UDMA6),
-	/* 19 */ DECLARE_NV_DEV("NFORCE-MCP67",		ATA_UDMA6),
-	/* 20 */ DECLARE_NV_DEV("NFORCE-MCP73",		ATA_UDMA6),
-	/* 21 */ DECLARE_NV_DEV("NFORCE-MCP77",		ATA_UDMA6),
-
-	/* 22 */ DECLARE_AMD_DEV("AMD5536", ATA_SWDMA2, ATA_UDMA5),
+	/* 0: AMD7401 */	DECLARE_AMD_DEV(0x00, ATA_UDMA2),
+	/* 1: AMD7409 */	DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4),
+	/* 2: AMD7411/7441 */	DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
+	/* 3: AMD8111 */	DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6),
+
+	/* 4: NFORCE */		DECLARE_NV_DEV(ATA_UDMA5),
+	/* 5: >= NFORCE2 */	DECLARE_NV_DEV(ATA_UDMA6),
+
+	/* 6: AMD5536 */	DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
 };
 
 static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -274,7 +260,7 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_
 		if (dev->revision <= 7)
 			d.swdma_mask = 0;
 		d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
-	} else if (idx == 4) {
+	} else if (idx == 3) {
 		if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
 		    dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
 			d.udma_mask = ATA_UDMA5;
@@ -308,30 +294,30 @@ static const struct pci_device_id amd74xx_pci_tbl[] = {
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_COBRA_7401),		 0 },
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_VIPER_7409),		 1 },
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_VIPER_7411),		 2 },
-	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_OPUS_7441),		 3 },
-	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_8111_IDE),		 4 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_IDE),	 5 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE),	 6 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE),	 7 },
+	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_OPUS_7441),		 2 },
+	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_8111_IDE),		 3 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_IDE),	 4 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE),	 5 },
 #ifdef CONFIG_BLK_DEV_IDE_SATA
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA),	 8 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA),	 5 },
 #endif
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE),	 9 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE),	10 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE),	 5 },
 #ifdef CONFIG_BLK_DEV_IDE_SATA
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA),	11 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2),	12 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2),	 5 },
 #endif
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE),	13 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE),	14 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE),	15 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE),	16 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE),	17 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE),	18 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE),	19 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE),	20 },
-	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE),	21 },
-	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE),		22 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE),	 5 },
+	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE),	 5 },
+	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE),		 6 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 4c49c1ba618..332f08f43b5 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -11,6 +11,8 @@
 #include <linux/ide.h>
 #include <linux/init.h>
 
+#define DRV_NAME "atiixp"
+
 #define ATIIXP_IDE_PIO_TIMING		0x40
 #define ATIIXP_IDE_MDMA_TIMING		0x44
 #define ATIIXP_IDE_PIO_CONTROL		0x48
@@ -137,16 +139,17 @@ static const struct ide_port_ops atiixp_port_ops = {
 };
 
 static const struct ide_port_info atiixp_pci_info[] __devinitdata = {
-	{	/* 0 */
-		.name		= "ATIIXP",
+	{	/* 0: IXP200/300/400/700 */
+		.name		= DRV_NAME,
 		.enablebits	= {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
 		.port_ops	= &atiixp_port_ops,
 		.host_flags	= IDE_HFLAG_LEGACY_IRQS,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
-	},{	/* 1 */
-		.name		= "SB600_PATA",
+	},
+	{	/* 1: IXP600 */
+		.name		= DRV_NAME,
 		.enablebits	= {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
 		.port_ops	= &atiixp_port_ops,
 		.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS,
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 0a4d194bc35..3d84debaf81 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -19,6 +19,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "cmd64x"
+
 #define CMD_DEBUG 0
 
 #if CMD_DEBUG
@@ -407,8 +409,8 @@ static const struct ide_dma_ops cmd648_dma_ops = {
 };
 
 static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
-	{	/* 0 */
-		.name		= "CMD643",
+	{	/* 0: CMD643 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
 		.port_ops	= &cmd64x_port_ops,
@@ -418,8 +420,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= 0x00, /* no udma */
-	},{	/* 1 */
-		.name		= "CMD646",
+	},
+	{	/* 1: CMD646 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
 		.chipset	= ide_cmd646,
@@ -429,8 +432,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA2,
-	},{	/* 2 */
-		.name		= "CMD648",
+	},
+	{	/* 2: CMD648 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
 		.port_ops	= &cmd64x_port_ops,
@@ -439,8 +443,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA4,
-	},{	/* 3 */
-		.name		= "CMD649",
+	},
+	{	/* 3: CMD649 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
 		.port_ops	= &cmd64x_port_ops,
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index b03d8ae947e..c0364b287f1 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -41,6 +41,8 @@
 #include <linux/ide.h>
 #include <linux/dma-mapping.h>
 
+#define DRV_NAME "cs5520"
+
 struct pio_clocks
 {
 	int address;
@@ -92,18 +94,11 @@ static const struct ide_port_ops cs5520_port_ops = {
 	.set_dma_mode		= cs5520_set_dma_mode,
 };
 
-#define DECLARE_CS_DEV(name_str)				\
-	{							\
-		.name		= name_str,			\
-		.port_ops	= &cs5520_port_ops,		\
-		.host_flags	= IDE_HFLAG_ISA_PORTS |		\
-				  IDE_HFLAG_CS5520,		\
-		.pio_mask	= ATA_PIO4,			\
-	}
-
-static const struct ide_port_info cyrix_chipsets[] __devinitdata = {
-	/* 0 */ DECLARE_CS_DEV("Cyrix 5510"),
-	/* 1 */ DECLARE_CS_DEV("Cyrix 5520")
+static const struct ide_port_info cyrix_chipset __devinitdata = {
+	.name		= DRV_NAME,
+	.port_ops	= &cs5520_port_ops,
+	.host_flags	= IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520,
+	.pio_mask	= ATA_PIO4,
 };
 
 /*
@@ -114,7 +109,7 @@ static const struct ide_port_info cyrix_chipsets[] __devinitdata = {
  
 static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	const struct ide_port_info *d = &cyrix_chipsets[id->driver_data];
+	const struct ide_port_info *d = &cyrix_chipset;
 	hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
 
 	ide_setup_pci_noise(dev, d);
@@ -128,7 +123,8 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 	}
 	pci_set_master(dev);
 	if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
-		printk(KERN_WARNING "cs5520: No suitable DMA available.\n");
+		printk(KERN_WARNING "%s: No suitable DMA available.\n",
+			d->name);
 		return -ENODEV;
 	}
 
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index dff345c763e..5543c8677a5 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -22,6 +22,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "cs5530"
+
 /*
  * Here are the standard PIO mode 0-4 timings for each "format".
  * Format-0 uses fast data reg timings, with slower command reg timings.
@@ -243,7 +245,7 @@ static const struct ide_port_ops cs5530_port_ops = {
 };
 
 static const struct ide_port_info cs5530_chipset __devinitdata = {
-	.name		= "CS5530",
+	.name		= DRV_NAME,
 	.init_chipset	= init_chipset_cs5530,
 	.init_hwif	= init_hwif_cs5530,
 	.port_ops	= &cs5530_port_ops,
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index a7300139153..f7b50cdeefa 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -26,6 +26,8 @@
 #include <linux/pci.h>
 #include <linux/ide.h>
 
+#define DRV_NAME "cs5535"
+
 #define MSR_ATAC_BASE		0x51300000
 #define ATAC_GLD_MSR_CAP	(MSR_ATAC_BASE+0)
 #define ATAC_GLD_MSR_CONFIG	(MSR_ATAC_BASE+0x01)
@@ -169,7 +171,7 @@ static const struct ide_port_ops cs5535_port_ops = {
 };
 
 static const struct ide_port_info cs5535_chipset __devinitdata = {
-	.name		= "CS5535",
+	.name		= DRV_NAME,
 	.port_ops	= &cs5535_port_ops,
 	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
 	.pio_mask	= ATA_PIO4,
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 04f268866b6..41c7f3351eb 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -48,6 +48,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "cy82c693"
+
 /* the current version */
 #define CY82_VERSION	"CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)"
 
@@ -398,7 +400,7 @@ static const struct ide_port_ops cy82c693_port_ops = {
 };
 
 static const struct ide_port_info cy82c693_chipset __devinitdata = {
-	.name		= "CY82C693",
+	.name		= DRV_NAME,
 	.init_chipset	= init_chipset_cy82c693,
 	.init_iops	= init_iops_cy82c693,
 	.port_ops	= &cy82c693_port_ops,
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index e034e21af7f..b07d4f4273b 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -27,6 +27,8 @@
 #include <linux/ide.h>
 #include <linux/init.h>
 
+#define DRV_NAME "ide_pci_generic"
+
 static int ide_generic_all;		/* Set to claim all devices */
 
 module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
@@ -34,9 +36,9 @@ MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE st
 
 #define IDE_HFLAGS_UMC (IDE_HFLAG_NO_DMA | IDE_HFLAG_FORCE_LEGACY_IRQS)
 
-#define DECLARE_GENERIC_PCI_DEV(name_str, extra_flags) \
+#define DECLARE_GENERIC_PCI_DEV(extra_flags) \
 	{ \
-		.name		= name_str, \
+		.name		= DRV_NAME, \
 		.host_flags	= IDE_HFLAG_TRUST_BIOS_FOR_DMA | \
 				  extra_flags, \
 		.swdma_mask	= ATA_SWDMA2, \
@@ -45,10 +47,11 @@ MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE st
 	}
 
 static const struct ide_port_info generic_chipsets[] __devinitdata = {
-	/*  0 */ DECLARE_GENERIC_PCI_DEV("Unknown",	0),
+	/*  0: Unknown */
+	DECLARE_GENERIC_PCI_DEV(0),
 
-	{	/* 1 */
-		.name		= "NS87410",
+	{	/* 1: NS87410 */
+		.name		= DRV_NAME,
 		.enablebits	= { {0x43, 0x08, 0x08}, {0x47, 0x08, 0x08} },
 		.host_flags	= IDE_HFLAG_TRUST_BIOS_FOR_DMA,
 		.swdma_mask	= ATA_SWDMA2,
@@ -56,17 +59,15 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = {
 		.udma_mask	= ATA_UDMA6,
 	},
 
-	/*  2 */ DECLARE_GENERIC_PCI_DEV("SAMURAI",	0),
-	/*  3 */ DECLARE_GENERIC_PCI_DEV("HT6565",	0),
-	/*  4 */ DECLARE_GENERIC_PCI_DEV("UM8673F",	IDE_HFLAGS_UMC),
-	/*  5 */ DECLARE_GENERIC_PCI_DEV("UM8886A",	IDE_HFLAGS_UMC),
-	/*  6 */ DECLARE_GENERIC_PCI_DEV("UM8886BF",	IDE_HFLAGS_UMC),
-	/*  7 */ DECLARE_GENERIC_PCI_DEV("HINT_IDE",	0),
-	/*  8 */ DECLARE_GENERIC_PCI_DEV("VIA_IDE",	IDE_HFLAG_NO_AUTODMA),
-	/*  9 */ DECLARE_GENERIC_PCI_DEV("OPTI621V",	IDE_HFLAG_NO_AUTODMA),
-
-	{	/* 10 */
-		.name		= "VIA8237SATA",
+	/*  2: SAMURAI / HT6565 / HINT_IDE */
+	DECLARE_GENERIC_PCI_DEV(0),
+	/*  3: UM8673F / UM8886A / UM8886BF */
+	DECLARE_GENERIC_PCI_DEV(IDE_HFLAGS_UMC),
+	/*  4: VIA_IDE / OPTI621V / Piccolo010{2,3,5} */
+	DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_AUTODMA),
+
+	{	/* 5: VIA8237SATA */
+		.name		= DRV_NAME,
 		.host_flags	= IDE_HFLAG_TRUST_BIOS_FOR_DMA |
 				  IDE_HFLAG_OFF_BOARD,
 		.swdma_mask	= ATA_SWDMA2,
@@ -74,12 +75,8 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = {
 		.udma_mask	= ATA_UDMA6,
 	},
 
-	/* 11 */ DECLARE_GENERIC_PCI_DEV("Piccolo0102",	IDE_HFLAG_NO_AUTODMA),
-	/* 12 */ DECLARE_GENERIC_PCI_DEV("Piccolo0103",	IDE_HFLAG_NO_AUTODMA),
-	/* 13 */ DECLARE_GENERIC_PCI_DEV("Piccolo0105",	IDE_HFLAG_NO_AUTODMA),
-
-	{	/* 14 */
-		.name		= "Revolution",
+	{	/* 6: Revolution */
+		.name		= DRV_NAME,
 		.host_flags	= IDE_HFLAG_CLEAR_SIMPLEX |
 				  IDE_HFLAG_TRUST_BIOS_FOR_DMA |
 				  IDE_HFLAG_OFF_BOARD,
@@ -147,20 +144,20 @@ out:
 static const struct pci_device_id generic_pci_tbl[] = {
 	{ PCI_VDEVICE(NS,	PCI_DEVICE_ID_NS_87410),		 1 },
 	{ PCI_VDEVICE(PCTECH,	PCI_DEVICE_ID_PCTECH_SAMURAI_IDE),	 2 },
-	{ PCI_VDEVICE(HOLTEK,	PCI_DEVICE_ID_HOLTEK_6565),		 3 },
-	{ PCI_VDEVICE(UMC,	PCI_DEVICE_ID_UMC_UM8673F),		 4 },
-	{ PCI_VDEVICE(UMC,	PCI_DEVICE_ID_UMC_UM8886A),		 5 },
-	{ PCI_VDEVICE(UMC,	PCI_DEVICE_ID_UMC_UM8886BF),		 6 },
-	{ PCI_VDEVICE(HINT,	PCI_DEVICE_ID_HINT_VXPROII_IDE),	 7 },
-	{ PCI_VDEVICE(VIA,	PCI_DEVICE_ID_VIA_82C561),		 8 },
-	{ PCI_VDEVICE(OPTI,	PCI_DEVICE_ID_OPTI_82C558),		 9 },
+	{ PCI_VDEVICE(HOLTEK,	PCI_DEVICE_ID_HOLTEK_6565),		 2 },
+	{ PCI_VDEVICE(UMC,	PCI_DEVICE_ID_UMC_UM8673F),		 3 },
+	{ PCI_VDEVICE(UMC,	PCI_DEVICE_ID_UMC_UM8886A),		 3 },
+	{ PCI_VDEVICE(UMC,	PCI_DEVICE_ID_UMC_UM8886BF),		 3 },
+	{ PCI_VDEVICE(HINT,	PCI_DEVICE_ID_HINT_VXPROII_IDE),	 2 },
+	{ PCI_VDEVICE(VIA,	PCI_DEVICE_ID_VIA_82C561),		 4 },
+	{ PCI_VDEVICE(OPTI,	PCI_DEVICE_ID_OPTI_82C558),		 4 },
 #ifdef CONFIG_BLK_DEV_IDE_SATA
-	{ PCI_VDEVICE(VIA,	PCI_DEVICE_ID_VIA_8237_SATA),		10 },
+	{ PCI_VDEVICE(VIA,	PCI_DEVICE_ID_VIA_8237_SATA),		 5 },
 #endif
-	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO),		11 },
-	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO_1),	12 },
-	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),	13 },
-	{ PCI_VDEVICE(NETCELL,	PCI_DEVICE_ID_REVOLUTION),		14 },
+	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO),		 4 },
+	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO_1),	 4 },
+	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),	 4 },
+	{ PCI_VDEVICE(NETCELL,	PCI_DEVICE_ID_REVOLUTION),		 6 },
 	/*
 	 * Must come last.  If you add entries adjust
 	 * this table and generic_chipsets[] appropriately.
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index b52f8339102..baabb4ce0d7 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -33,6 +33,8 @@
 #include <linux/init.h>
 #include <linux/ide.h>
 
+#define DRV_NAME "hpt34x"
+
 #define HPT343_DEBUG_DRIVE_INFO		0
 
 static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
@@ -126,15 +128,15 @@ static const struct ide_port_ops hpt34x_port_ops = {
 	 IDE_HFLAG_NO_AUTODMA)
 
 static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
-	{ /* 0 */
-		.name		= "HPT343",
+	{ /* 0: HPT343 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_hpt34x,
 		.port_ops	= &hpt34x_port_ops,
 		.host_flags	= IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE,
 		.pio_mask	= ATA_PIO5,
 	},
-	{ /* 1 */
-		.name		= "HPT345",
+	{ /* 1: HPT345 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_hpt34x,
 		.port_ops	= &hpt34x_port_ops,
 		.host_flags	= IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD,
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index b8004c331ed..6a1c65c3be3 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -131,6 +131,8 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
+#define DRV_NAME "hpt366"
+
 /* various tuning parameters */
 #define HPT_RESET_STATE_ENGINE
 #undef	HPT_DELAY_INTERRUPT
@@ -1362,7 +1364,7 @@ static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
 	if (dev2->irq != dev->irq) {
 		/* FIXME: we need a core pci_set_interrupt() */
 		dev2->irq = dev->irq;
-		printk(KERN_INFO "HPT374 %s: PCI config space interrupt "
+		printk(KERN_INFO DRV_NAME " %s: PCI config space interrupt "
 			"fixed\n", pci_name(dev2));
 	}
 }
@@ -1398,7 +1400,7 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
 	pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
 
 	if (pin1 != pin2 && dev->irq == dev2->irq) {
-		printk(KERN_INFO "HPT36x %s: onboard version of chipset, "
+		printk(KERN_INFO DRV_NAME " %s: onboard version of chipset, "
 			"pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2);
 		return 1;
 	}
@@ -1454,8 +1456,8 @@ static const struct ide_dma_ops hpt36x_dma_ops = {
 };
 
 static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
-	{	/* 0 */
-		.name		= "HPT36x",
+	{	/* 0: HPT36x */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_hpt366,
 		.init_hwif	= init_hwif_hpt366,
 		.init_dma	= init_dma_hpt366,
@@ -1471,53 +1473,9 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
 		.host_flags	= IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
-	},{	/* 1 */
-		.name		= "HPT372A",
-		.init_chipset	= init_chipset_hpt366,
-		.init_hwif	= init_hwif_hpt366,
-		.init_dma	= init_dma_hpt366,
-		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
-		.port_ops	= &hpt3xx_port_ops,
-		.dma_ops	= &hpt37x_dma_ops,
-		.host_flags	= IDE_HFLAGS_HPT3XX,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-	},{	/* 2 */
-		.name		= "HPT302",
-		.init_chipset	= init_chipset_hpt366,
-		.init_hwif	= init_hwif_hpt366,
-		.init_dma	= init_dma_hpt366,
-		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
-		.port_ops	= &hpt3xx_port_ops,
-		.dma_ops	= &hpt37x_dma_ops,
-		.host_flags	= IDE_HFLAGS_HPT3XX,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-	},{	/* 3 */
-		.name		= "HPT371",
-		.init_chipset	= init_chipset_hpt366,
-		.init_hwif	= init_hwif_hpt366,
-		.init_dma	= init_dma_hpt366,
-		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
-		.port_ops	= &hpt3xx_port_ops,
-		.dma_ops	= &hpt37x_dma_ops,
-		.host_flags	= IDE_HFLAGS_HPT3XX,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-	},{	/* 4 */
-		.name		= "HPT374",
-		.init_chipset	= init_chipset_hpt366,
-		.init_hwif	= init_hwif_hpt366,
-		.init_dma	= init_dma_hpt366,
-		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
-		.udma_mask	= ATA_UDMA5,
-		.port_ops	= &hpt3xx_port_ops,
-		.dma_ops	= &hpt37x_dma_ops,
-		.host_flags	= IDE_HFLAGS_HPT3XX,
-		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
-	},{	/* 5 */
-		.name		= "HPT372N",
+	},
+	{	/* 1: HPT3xx */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_hpt366,
 		.init_hwif	= init_hwif_hpt366,
 		.init_dma	= init_dma_hpt366,
@@ -1583,9 +1541,10 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
 		break;
 	}
 
-	d = hpt366_chipsets[idx];
+	printk(KERN_INFO DRV_NAME ": %s chipset detected\n", info->chip_name);
+
+	d = hpt366_chipsets[min_t(u8, idx, 1)];
 
-	d.name = info->chip_name;
 	d.udma_mask = info->udma_mask;
 
 	/* fixup ->dma_ops for HPT370/HPT370A */
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 451b87fd821..6eba8f18826 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -14,6 +14,8 @@
 #include <linux/ide.h>
 #include <linux/init.h>
 
+#define DRV_NAME "it8213"
+
 /**
  *	it8213_set_pio_mode	-	set host controller for PIO mode
  *	@drive: drive
@@ -156,7 +158,7 @@ static const struct ide_port_ops it8213_port_ops = {
 };
 
 static const struct ide_port_info it8213_chipset __devinitdata = {
-	.name		= "IT8213",
+	.name		= DRV_NAME,
 	.enablebits	= { {0x41, 0x80, 0x80} },
 	.port_ops	= &it8213_port_ops,
 	.host_flags	= IDE_HFLAG_SINGLE,
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index a3d8959436c..74173352741 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -67,6 +67,8 @@
 #include <linux/ide.h>
 #include <linux/init.h>
 
+#define DRV_NAME "it821x"
+
 struct it821x_dev
 {
 	unsigned int smart:1,		/* Are we in smart raid mode */
@@ -569,7 +571,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 		idev->timing10 = 1;
 		hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
 		if (idev->smart == 0)
-			printk(KERN_WARNING "it821x %s: revision 0x10, "
+			printk(KERN_WARNING DRV_NAME " %s: revision 0x10, "
 				"workarounds activated\n", pci_name(dev));
 	}
 
@@ -610,12 +612,12 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha
 
 	/* Force the card into bypass mode if so requested */
 	if (it8212_noraid) {
-		printk(KERN_INFO "it821x %s: forcing bypass mode\n",
+		printk(KERN_INFO DRV_NAME " %s: forcing bypass mode\n",
 			pci_name(dev));
 		it8212_disable_raid(dev);
 	}
 	pci_read_config_byte(dev, 0x50, &conf);
-	printk(KERN_INFO "it821x %s: controller in %s mode\n",
+	printk(KERN_INFO DRV_NAME " %s: controller in %s mode\n",
 		pci_name(dev), mode[conf & 1]);
 	return 0;
 }
@@ -629,7 +631,7 @@ static const struct ide_port_ops it821x_port_ops = {
 };
 
 static const struct ide_port_info it821x_chipset __devinitdata = {
-	.name		= "IT821X",
+	.name		= DRV_NAME,
 	.init_chipset	= init_chipset_it821x,
 	.init_hwif	= init_hwif_it821x,
 	.port_ops	= &it821x_port_ops,
@@ -652,7 +654,7 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic
 
 	itdevs = kzalloc(2 * sizeof(*itdevs), GFP_KERNEL);
 	if (itdevs == NULL) {
-		printk(KERN_ERR "it821x %s: out of memory\n", pci_name(dev));
+		printk(KERN_ERR DRV_NAME " %s: out of memory\n", pci_name(dev));
 		return -ENOMEM;
 	}
 
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 39e221b076e..545b6e172d9 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -12,6 +12,8 @@
 #include <linux/ide.h>
 #include <linux/init.h>
 
+#define DRV_NAME "jmicron"
+
 typedef enum {
 	PORT_PATA0 = 0,
 	PORT_PATA1 = 1,
@@ -102,7 +104,7 @@ static const struct ide_port_ops jmicron_port_ops = {
 };
 
 static const struct ide_port_info jmicron_chipset __devinitdata = {
-	.name		= "JMB",
+	.name		= DRV_NAME,
 	.enablebits	= { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
 	.port_ops	= &jmicron_port_ops,
 	.pio_mask	= ATA_PIO5,
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index afcc742a63a..ffefcd15196 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -19,6 +19,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "ns87415"
+
 #ifdef CONFIG_SUPERIO
 /* SUPERIO 87560 is a PoS chip that NatSem denies exists.
  * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
@@ -305,7 +307,7 @@ static const struct ide_dma_ops ns87415_dma_ops = {
 };
 
 static const struct ide_port_info ns87415_chipset __devinitdata = {
-	.name		= "NS87415",
+	.name		= DRV_NAME,
 	.init_hwif	= init_hwif_ns87415,
 	.port_ops	= &ns87415_port_ops,
 	.dma_ops	= &ns87415_dma_ops,
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 4895f2ff3f0..e28e672ddaf 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -90,6 +90,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "opti621"
+
 #define READ_REG 0	/* index of Read cycle timing register */
 #define WRITE_REG 1	/* index of Write cycle timing register */
 #define CNTRL_REG 3	/* index of Control register */
@@ -200,7 +202,7 @@ static const struct ide_port_ops opti621_port_ops = {
 };
 
 static const struct ide_port_info opti621_chipset __devinitdata = {
-	.name		= "OPTI621/X",
+	.name		= DRV_NAME,
 	.enablebits	= { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
 	.port_ops	= &opti621_port_ops,
 	.host_flags	= IDE_HFLAG_NO_DMA,
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 4c2b669d7de..1f679195722 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -31,6 +31,8 @@
 #include <asm/pci-bridge.h>
 #endif
 
+#define DRV_NAME "pdc202xx_new"
+
 #undef DEBUG
 
 #ifdef DEBUG
@@ -458,7 +460,7 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
 
 		if (dev2->irq != dev->irq) {
 			dev2->irq = dev->irq;
-			printk(KERN_INFO "PDC20270 %s: PCI config space "
+			printk(KERN_INFO DRV_NAME " %s: PCI config space "
 				"interrupt fixed\n", pci_name(dev));
 		}
 
@@ -476,9 +478,9 @@ static const struct ide_port_ops pdcnew_port_ops = {
 	.cable_detect		= pdcnew_cable_detect,
 };
 
-#define DECLARE_PDCNEW_DEV(name_str, udma) \
+#define DECLARE_PDCNEW_DEV(udma) \
 	{ \
-		.name		= name_str, \
+		.name		= DRV_NAME, \
 		.init_chipset	= init_chipset_pdcnew, \
 		.port_ops	= &pdcnew_port_ops, \
 		.host_flags	= IDE_HFLAG_POST_SET_MODE | \
@@ -490,13 +492,8 @@ static const struct ide_port_ops pdcnew_port_ops = {
 	}
 
 static const struct ide_port_info pdcnew_chipsets[] __devinitdata = {
-	/* 0 */ DECLARE_PDCNEW_DEV("PDC20268", ATA_UDMA5),
-	/* 1 */ DECLARE_PDCNEW_DEV("PDC20269", ATA_UDMA6),
-	/* 2 */ DECLARE_PDCNEW_DEV("PDC20270", ATA_UDMA5),
-	/* 3 */ DECLARE_PDCNEW_DEV("PDC20271", ATA_UDMA6),
-	/* 4 */ DECLARE_PDCNEW_DEV("PDC20275", ATA_UDMA6),
-	/* 5 */ DECLARE_PDCNEW_DEV("PDC20276", ATA_UDMA6),
-	/* 6 */ DECLARE_PDCNEW_DEV("PDC20277", ATA_UDMA6),
+	/* 0: PDC202{68,70} */		DECLARE_PDCNEW_DEV(ATA_UDMA5),
+	/* 1: PDC202{69,71,75,76,77} */	DECLARE_PDCNEW_DEV(ATA_UDMA6),
 };
 
 /**
@@ -510,13 +507,10 @@ static const struct ide_port_info pdcnew_chipsets[] __devinitdata = {
  
 static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	const struct ide_port_info *d;
+	const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data];
 	struct pci_dev *bridge = dev->bus->self;
-	u8 idx = id->driver_data;
-
-	d = &pdcnew_chipsets[idx];
 
-	if (idx == 2 && bridge &&
+	if (dev->device == PCI_DEVICE_ID_PROMISE_20270 && bridge &&
 	    bridge->vendor == PCI_VENDOR_ID_DEC &&
 	    bridge->device == PCI_DEVICE_ID_DEC_21150) {
 		struct pci_dev *dev2;
@@ -534,11 +528,11 @@ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_de
 		}
 	}
 
-	if (idx == 5 && bridge &&
+	if (dev->device == PCI_DEVICE_ID_PROMISE_20276 && bridge &&
 	    bridge->vendor == PCI_VENDOR_ID_INTEL &&
 	    (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
 	     bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
-		printk(KERN_INFO "PDC20276 %s: attached to I2O RAID controller,"
+		printk(KERN_INFO DRV_NAME " %s: attached to I2O RAID controller,"
 			" skipping\n", pci_name(dev));
 		return -ENODEV;
 	}
@@ -558,11 +552,11 @@ static void __devexit pdc202new_remove(struct pci_dev *dev)
 static const struct pci_device_id pdc202new_pci_tbl[] = {
 	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), 0 },
 	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), 1 },
-	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 2 },
-	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 3 },
-	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 4 },
-	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 5 },
-	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 6 },
+	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 0 },
+	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 1 },
+	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 1 },
+	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 1 },
+	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 1 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl);
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 5cb2731047e..da92d127868 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -20,6 +20,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "pdc202xx_old"
+
 #define PDC202XX_DEBUG_DRIVE_INFO	0
 
 static const char *pdc_quirk_drives[] = {
@@ -350,9 +352,9 @@ static const struct ide_dma_ops pdc2026x_dma_ops = {
 	.dma_timeout		= pdc202xx_dma_timeout,
 };
 
-#define DECLARE_PDC2026X_DEV(name_str, udma, extra_flags) \
+#define DECLARE_PDC2026X_DEV(udma, extra_flags) \
 	{ \
-		.name		= name_str, \
+		.name		= DRV_NAME, \
 		.init_chipset	= init_chipset_pdc202xx, \
 		.port_ops	= &pdc2026x_port_ops, \
 		.dma_ops	= &pdc2026x_dma_ops, \
@@ -363,8 +365,8 @@ static const struct ide_dma_ops pdc2026x_dma_ops = {
 	}
 
 static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
-	{	/* 0 */
-		.name		= "PDC20246",
+	{	/* 0: PDC20246 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_pdc202xx,
 		.port_ops	= &pdc20246_port_ops,
 		.dma_ops	= &pdc20246_dma_ops,
@@ -374,10 +376,10 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
 		.udma_mask	= ATA_UDMA2,
 	},
 
-	/* 1 */ DECLARE_PDC2026X_DEV("PDC20262", ATA_UDMA4, 0),
-	/* 2 */ DECLARE_PDC2026X_DEV("PDC20263", ATA_UDMA4, 0),
-	/* 3 */ DECLARE_PDC2026X_DEV("PDC20265", ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
-	/* 4 */ DECLARE_PDC2026X_DEV("PDC20267", ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
+	/* 1: PDC2026{2,3} */
+	DECLARE_PDC2026X_DEV(ATA_UDMA4, 0),
+	/* 2: PDC2026{5,7} */
+	DECLARE_PDC2026X_DEV(ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
 };
 
 /**
@@ -396,17 +398,17 @@ static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_dev
 
 	d = &pdc202xx_chipsets[idx];
 
-	if (idx < 3)
+	if (idx < 2)
 		pdc202ata4_fixup_irq(dev, d->name);
 
-	if (idx == 3) {
+	if (dev->vendor == PCI_DEVICE_ID_PROMISE_20265) {
 		struct pci_dev *bridge = dev->bus->self;
 
 		if (bridge &&
 		    bridge->vendor == PCI_VENDOR_ID_INTEL &&
 		    (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
 		     bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
-			printk(KERN_INFO "pdc202xx_old %s: skipping Promise "
+			printk(KERN_INFO DRV_NAME " %s: skipping Promise "
 				"PDC20265 attached to I2O RAID controller\n",
 				pci_name(dev));
 			return -ENODEV;
@@ -419,9 +421,9 @@ static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_dev
 static const struct pci_device_id pdc202xx_pci_tbl[] = {
 	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
 	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
-	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 2 },
-	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 3 },
-	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 4 },
+	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
+	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
+	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl);
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index c16b1ab4d4f..9eb411f5c35 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -54,6 +54,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "piix"
+
 static int no_piix_dma;
 
 /**
@@ -314,9 +316,9 @@ static const struct ide_port_ops piix_port_ops = {
  #define IDE_HFLAGS_PIIX 0
 #endif
 
-#define DECLARE_PIIX_DEV(name_str, udma) \
+#define DECLARE_PIIX_DEV(udma) \
 	{						\
-		.name		= name_str,		\
+		.name		= DRV_NAME,		\
 		.init_hwif	= init_hwif_piix,	\
 		.enablebits	= {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
 		.port_ops	= &piix_port_ops,	\
@@ -327,9 +329,9 @@ static const struct ide_port_ops piix_port_ops = {
 		.udma_mask	= udma,			\
 	}
 
-#define DECLARE_ICH_DEV(name_str, udma) \
+#define DECLARE_ICH_DEV(udma) \
 	{ \
-		.name		= name_str, \
+		.name		= DRV_NAME, \
 		.init_chipset	= init_chipset_ich, \
 		.init_hwif	= init_hwif_ich, \
 		.enablebits	= {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
@@ -342,45 +344,31 @@ static const struct ide_port_ops piix_port_ops = {
 	}
 
 static const struct ide_port_info piix_pci_info[] __devinitdata = {
-	/*  0 */ DECLARE_PIIX_DEV("PIIXa",	0x00),	/* no udma */
-	/*  1 */ DECLARE_PIIX_DEV("PIIXb",	0x00),	/* no udma */
-
-	/*  2 */
+	/* 0: MPIIX */
 	{	/*
 		 * MPIIX actually has only a single IDE channel mapped to
 		 * the primary or secondary ports depending on the value
 		 * of the bit 14 of the IDETIM register at offset 0x6c
 		 */
-		.name		= "MPIIX",
+		.name		= DRV_NAME,
 		.enablebits	= {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
 		.host_flags	= IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA |
 				  IDE_HFLAGS_PIIX,
 		.pio_mask	= ATA_PIO4,
 		/* This is a painful system best to let it self tune for now */
 	},
-
-	/*  3 */ DECLARE_PIIX_DEV("PIIX3",	0x00),	/* no udma */
-	/*  4 */ DECLARE_PIIX_DEV("PIIX4",	ATA_UDMA2),
-	/*  5 */ DECLARE_ICH_DEV("ICH0",	ATA_UDMA2),
-	/*  6 */ DECLARE_PIIX_DEV("PIIX4",	ATA_UDMA2),
-	/*  7 */ DECLARE_ICH_DEV("ICH",		ATA_UDMA4),
-	/*  8 */ DECLARE_PIIX_DEV("PIIX4",	ATA_UDMA4),
-	/*  9 */ DECLARE_PIIX_DEV("PIIX4",	ATA_UDMA2),
-	/* 10 */ DECLARE_ICH_DEV("ICH2",	ATA_UDMA5),
-	/* 11 */ DECLARE_ICH_DEV("ICH2M",	ATA_UDMA5),
-	/* 12 */ DECLARE_ICH_DEV("ICH3M",	ATA_UDMA5),
-	/* 13 */ DECLARE_ICH_DEV("ICH3",	ATA_UDMA5),
-	/* 14 */ DECLARE_ICH_DEV("ICH4",	ATA_UDMA5),
-	/* 15 */ DECLARE_ICH_DEV("ICH5",	ATA_UDMA5),
-	/* 16 */ DECLARE_ICH_DEV("C-ICH",	ATA_UDMA5),
-	/* 17 */ DECLARE_ICH_DEV("ICH4",	ATA_UDMA5),
-	/* 18 */ DECLARE_ICH_DEV("ICH5-SATA",	ATA_UDMA5),
-	/* 19 */ DECLARE_ICH_DEV("ICH5",	ATA_UDMA5),
-	/* 20 */ DECLARE_ICH_DEV("ICH6",	ATA_UDMA5),
-	/* 21 */ DECLARE_ICH_DEV("ICH7",	ATA_UDMA5),
-	/* 22 */ DECLARE_ICH_DEV("ICH4",	ATA_UDMA5),
-	/* 23 */ DECLARE_ICH_DEV("ESB2",	ATA_UDMA5),
-	/* 24 */ DECLARE_ICH_DEV("ICH8M",	ATA_UDMA5),
+	/* 1: PIIXa/PIIXb/PIIX3 */
+	DECLARE_PIIX_DEV(0x00), /* no udma */
+	/* 2: PIIX4 */
+	DECLARE_PIIX_DEV(ATA_UDMA2),
+	/* 3: ICH0 */
+	DECLARE_ICH_DEV(ATA_UDMA2),
+	/* 4: ICH */
+	DECLARE_ICH_DEV(ATA_UDMA4),
+	/* 5: PIIX4 */
+	DECLARE_PIIX_DEV(ATA_UDMA4),
+	/* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
+	DECLARE_ICH_DEV(ATA_UDMA5),
 };
 
 /**
@@ -421,39 +409,39 @@ static void __devinit piix_check_450nx(void)
 			no_piix_dma = 2;
 	}
 	if(no_piix_dma)
-		printk(KERN_WARNING "piix: 450NX errata present, disabling IDE DMA.\n");
+		printk(KERN_WARNING DRV_NAME ": 450NX errata present, disabling IDE DMA.\n");
 	if(no_piix_dma == 2)
-		printk(KERN_WARNING "piix: A BIOS update may resolve this.\n");
+		printk(KERN_WARNING DRV_NAME ": A BIOS update may resolve this.\n");
 }		
 
 static const struct pci_device_id piix_pci_tbl[] = {
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_0),   0 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_1),   1 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX),     2 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371SB_1),   3 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371AB),     4 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AB_1),   5 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82443MX_1),   6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AA_1),   7 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82372FB_1),   8 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82451NX),     9 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_9),  10 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_8),  11 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_10), 12 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_11), 13 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_11), 14 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_11), 15 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801E_11),  16 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_10), 17 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_0),  1 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_1),  1 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX),    0 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371SB_1),  1 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371AB),    2 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AB_1),  3 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82443MX_1),  2 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AA_1),  4 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82372FB_1),  5 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82451NX),    2 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_9),  6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_8),  6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_10), 6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_11), 6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_11), 6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_11), 6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801E_11),  6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_10), 6 },
 #ifdef CONFIG_BLK_DEV_IDE_SATA
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_1),  18 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_1),  6 },
 #endif
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2),      19 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19),    20 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21),    21 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1),  22 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18),    23 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6),     24 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2),      6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19),    6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21),    6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1),  6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18),    6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6),     6 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index f7a3b9aff29..8d11ee838a2 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -21,6 +21,8 @@
 #include <linux/ide.h>
 #include <linux/init.h>
 
+#define DRV_NAME "rz1000"
+
 static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -40,7 +42,7 @@ static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
 }
 
 static const struct ide_port_info rz1000_chipset __devinitdata = {
-	.name		= "RZ100x",
+	.name		= DRV_NAME,
 	.init_hwif	= init_hwif_rz1000,
 	.chipset	= ide_rz1000,
 	.host_flags	= IDE_HFLAG_NO_DMA,
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 6509560ba66..8efaed16fea 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -22,6 +22,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "sc1200"
+
 #define SC1200_REV_A	0x00
 #define SC1200_REV_B1	0x01
 #define SC1200_REV_B3	0x02
@@ -291,7 +293,7 @@ static const struct ide_dma_ops sc1200_dma_ops = {
 };
 
 static const struct ide_port_info sc1200_chipset __devinitdata = {
-	.name		= "SC1200",
+	.name		= DRV_NAME,
 	.port_ops	= &sc1200_port_ops,
 	.dma_ops	= &sc1200_dma_ops,
 	.host_flags	= IDE_HFLAG_SERIALIZE |
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 1106ff44cde..e26bc8326db 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -38,6 +38,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "serverworks"
+
 #define SVWKS_CSB5_REVISION_NEW	0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
 #define SVWKS_CSB6_REVISION	0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
 
@@ -353,40 +355,44 @@ static const struct ide_port_ops svwks_port_ops = {
 #define IDE_HFLAGS_SVWKS IDE_HFLAG_LEGACY_IRQS
 
 static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
-	{	/* 0 */
-		.name		= "SvrWks OSB4",
+	{	/* 0: OSB4 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_svwks,
 		.port_ops	= &osb4_port_ops,
 		.host_flags	= IDE_HFLAGS_SVWKS,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= 0x00, /* UDMA is problematic on OSB4 */
-	},{	/* 1 */
-		.name		= "SvrWks CSB5",
+	},
+	{	/* 1: CSB5 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_svwks,
 		.port_ops	= &svwks_port_ops,
 		.host_flags	= IDE_HFLAGS_SVWKS,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
-	},{	/* 2 */
-		.name		= "SvrWks CSB6",
+	},
+	{	/* 2: CSB6 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_svwks,
 		.port_ops	= &svwks_port_ops,
 		.host_flags	= IDE_HFLAGS_SVWKS,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
-	},{	/* 3 */
-		.name		= "SvrWks CSB6",
+	},
+	{	/* 3: CSB6-2 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_svwks,
 		.port_ops	= &svwks_port_ops,
 		.host_flags	= IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
-	},{	/* 4 */
-		.name		= "SvrWks HT1000",
+	},
+	{	/* 4: HT1000 */
+		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_svwks,
 		.port_ops	= &svwks_port_ops,
 		.host_flags	= IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index fc29f1ca503..572b479a392 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -44,6 +44,8 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
+#define DRV_NAME "siimage"
+
 /**
  *	pdev_is_sata		-	check if device is SATA
  *	@pdev:	PCI device to check
@@ -717,9 +719,9 @@ static const struct ide_dma_ops sil_dma_ops = {
 	.dma_lost_irq		= ide_dma_lost_irq,
 };
 
-#define DECLARE_SII_DEV(name_str, p_ops)		\
+#define DECLARE_SII_DEV(p_ops)				\
 	{						\
-		.name		= name_str,		\
+		.name		= DRV_NAME,		\
 		.init_chipset	= init_chipset_siimage,	\
 		.init_iops	= init_iops_siimage,	\
 		.port_ops	= p_ops,		\
@@ -730,9 +732,8 @@ static const struct ide_dma_ops sil_dma_ops = {
 	}
 
 static const struct ide_port_info siimage_chipsets[] __devinitdata = {
-	/* 0 */ DECLARE_SII_DEV("SiI680",		&sil_pata_port_ops),
-	/* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA",	&sil_sata_port_ops),
-	/* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA",	&sil_sata_port_ops)
+	/* 0: SiI680 */  DECLARE_SII_DEV(&sil_pata_port_ops),
+	/* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
 };
 
 /**
@@ -761,7 +762,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 		static int first = 1;
 
 		if (first) {
-			printk(KERN_INFO "siimage: For full SATA support you "
+			printk(KERN_INFO DRV_NAME ": For full SATA support you "
 				"should use the libata sata_sil module.\n");
 			first = 0;
 		}
@@ -780,7 +781,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 		* seem to get terminally confused in the PCI spaces.
 		*/
 		if (!request_mem_region(bar5, barsize, d.name)) {
-			printk(KERN_WARNING "siimage %s: MMIO ports not "
+			printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
 				"available\n", pci_name(dev));
 		} else {
 			ioaddr = ioremap(bar5, barsize);
@@ -823,7 +824,7 @@ static const struct pci_device_id siimage_pci_tbl[] = {
 	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680),    0 },
 #ifdef CONFIG_BLK_DEV_IDE_SATA
 	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112),   1 },
-	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 2 },
+	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 },
 #endif
 	{ 0, },
 };
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 518d8ab413f..6fcb46c8787 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -52,6 +52,8 @@
 #include <linux/init.h>
 #include <linux/ide.h>
 
+#define DRV_NAME "sis5513"
+
 /* registers layout and init values are chipset family dependant */
 
 #define ATA_16		0x01
@@ -380,7 +382,7 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 		}
 		pci_dev_put(host);
 
-		printk(KERN_INFO "SIS5513 %s: %s %s controller\n",
+		printk(KERN_INFO DRV_NAME " %s: %s %s controller\n",
 			pci_name(dev), SiSHostChipInfo[i].name,
 			chipset_capability[chipset_family]);
 	}
@@ -397,7 +399,7 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 			pci_write_config_dword(dev, 0x54, idemisc);
 
 			if (trueid == 0x5518) {
-				printk(KERN_INFO "SIS5513 %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
+				printk(KERN_INFO DRV_NAME " %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
 					pci_name(dev));
 				chipset_family = ATA_133;
 
@@ -407,7 +409,7 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 				 */
 				if ((idemisc & 0x40000000) == 0) {
 					pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
-					printk(KERN_INFO "SIS5513 %s: Switching to 5513 register mapping\n",
+					printk(KERN_INFO DRV_NAME " %s: Switching to 5513 register mapping\n",
 						pci_name(dev));
 				}
 			}
@@ -432,11 +434,11 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 				pci_dev_put(lpc_bridge);
 
 				if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
-					printk(KERN_INFO "SIS5513 %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
+					printk(KERN_INFO DRV_NAME " %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
 						pci_name(dev));
 					chipset_family = ATA_133a;
 				} else {
-					printk(KERN_INFO "SIS5513 %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
+					printk(KERN_INFO DRV_NAME " %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
 						pci_name(dev));
 					chipset_family = ATA_100;
 				}
@@ -560,7 +562,7 @@ static const struct ide_port_ops sis_ata133_port_ops = {
 };
 
 static const struct ide_port_info sis5513_chipset __devinitdata = {
-	.name		= "SIS5513",
+	.name		= DRV_NAME,
 	.init_chipset	= init_chipset_sis5513,
 	.enablebits	= { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} },
 	.host_flags	= IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA,
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 72899f85c5b..fa720db3de1 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -23,6 +23,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "sl82c105"
+
 #undef DEBUG
 
 #ifdef DEBUG
@@ -301,7 +303,7 @@ static const struct ide_dma_ops sl82c105_dma_ops = {
 };
 
 static const struct ide_port_info sl82c105_chipset __devinitdata = {
-	.name		= "W82C105",
+	.name		= DRV_NAME,
 	.init_chipset	= init_chipset_sl82c105,
 	.enablebits	= {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
 	.port_ops	= &sl82c105_port_ops,
@@ -328,7 +330,7 @@ static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_dev
 		 * Never ever EVER under any circumstances enable
 		 * DMA when the bridge is this old.
 		 */
-		printk(KERN_INFO "W82C105_IDE: Winbond W83C553 bridge "
+		printk(KERN_INFO DRV_NAME ": Winbond W83C553 bridge "
 				 "revision %d, BM-DMA disabled\n", rev);
 		d.dma_ops = NULL;
 		d.mwdma_mask = 0;
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index fee5ebe4bb9..13d1fa491f2 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -15,6 +15,8 @@
 #include <linux/ide.h>
 #include <linux/init.h>
 
+#define DRV_NAME "slc90e66"
+
 static DEFINE_SPINLOCK(slc90e66_lock);
 
 static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -132,7 +134,7 @@ static const struct ide_port_ops slc90e66_port_ops = {
 };
 
 static const struct ide_port_info slc90e66_chipset __devinitdata = {
-	.name		= "SLC90E66",
+	.name		= DRV_NAME,
 	.enablebits	= { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} },
 	.port_ops	= &slc90e66_port_ops,
 	.host_flags	= IDE_HFLAG_LEGACY_IRQS,
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 102cd7c40cd..b1cb8a9ce5a 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -11,7 +11,7 @@
 #include <linux/pci.h>
 #include <linux/ide.h>
 
-#define DRV_NAME "TC86C001"
+#define DRV_NAME "tc86c001"
 
 static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
 {
@@ -193,7 +193,7 @@ static const struct ide_dma_ops tc86c001_dma_ops = {
 };
 
 static const struct ide_port_info tc86c001_chipset __devinitdata = {
-	.name		= "TC86C001",
+	.name		= DRV_NAME,
 	.init_hwif	= init_hwif_tc86c001,
 	.port_ops	= &tc86c001_port_ops,
 	.dma_ops	= &tc86c001_dma_ops,
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 78e24ac8097..b77ec35151b 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -33,6 +33,8 @@
 #include <linux/ide.h>
 #include <linux/init.h>
 
+#define DRV_NAME "triflex"
+
 static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif = HWIF(drive);
@@ -93,7 +95,7 @@ static const struct ide_port_ops triflex_port_ops = {
 };
 
 static const struct ide_port_info triflex_device __devinitdata = {
-	.name		= "TRIFLEX",
+	.name		= DRV_NAME,
 	.enablebits	= {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
 	.port_ops	= &triflex_port_ops,
 	.pio_mask	= ATA_PIO4,
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 7bda5ed92e1..fd28b49977f 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -141,6 +141,8 @@
 
 #include <asm/io.h>
 
+#define DRV_NAME "trm290"
+
 static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
 {
 	ide_hwif_t *hwif = HWIF(drive);
@@ -245,10 +247,10 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
 	u8 reg = 0;
 
 	if ((dev->class & 5) && cfg_base)
-		printk(KERN_INFO "TRM290 %s: chip", pci_name(dev));
+		printk(KERN_INFO DRV_NAME " %s: chip", pci_name(dev));
 	else {
 		cfg_base = 0x3df0;
-		printk(KERN_INFO "TRM290 %s: using default", pci_name(dev));
+		printk(KERN_INFO DRV_NAME " %s: using default", pci_name(dev));
 	}
 	printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
 	hwif->config_data = cfg_base;
@@ -325,7 +327,7 @@ static struct ide_dma_ops trm290_dma_ops = {
 };
 
 static const struct ide_port_info trm290_chipset __devinitdata = {
-	.name		= "TRM290",
+	.name		= DRV_NAME,
 	.init_hwif	= init_hwif_trm290,
 	.chipset	= ide_trm290,
 	.port_ops	= &trm290_port_ops,
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 23332556e61..170e058f1fb 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -35,6 +35,8 @@
 #include <asm/processor.h>
 #endif
 
+#define DRV_NAME "via82cxxx"
+
 #define VIA_IDE_ENABLE		0x40
 #define VIA_IDE_CONFIG		0x41
 #define VIA_FIFO_CONFIG		0x43
@@ -373,7 +375,7 @@ static const struct ide_port_ops via_port_ops = {
 };
 
 static const struct ide_port_info via82cxxx_chipset __devinitdata = {
-	.name		= "VP_IDE",
+	.name		= DRV_NAME,
 	.init_chipset	= init_chipset_via82cxxx,
 	.enablebits	= { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
 	.port_ops	= &via_port_ops,
@@ -401,7 +403,7 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 	 */
 	via_config = via_config_find(&isa);
 	if (!via_config->id) {
-		printk(KERN_WARNING "VP_IDE %s: unknown chipset, skipping\n",
+		printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n",
 			pci_name(dev));
 		return -ENODEV;
 	}
@@ -409,7 +411,7 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 	/*
 	 * Print the boot message.
 	 */
-	printk(KERN_INFO "VP_IDE %s: VIA %s (rev %02x) IDE %sDMA%s\n",
+	printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
 		pci_name(dev), via_config->name, isa->revision,
 		via_config->udma_mask ? "U" : "MW",
 		via_dma[via_config->udma_mask ?
@@ -429,9 +431,9 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 	}
 
 	if (via_clock < 20000 || via_clock > 50000) {
-		printk(KERN_WARNING "VP_IDE: User given PCI clock speed "
+		printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
 			"impossible (%d), using 33 MHz instead.\n", via_clock);
-		printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want "
+		printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
 			"to assume 80-wire cable.\n");
 		via_clock = 33333;
 	}
@@ -453,7 +455,8 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 
 	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
 	if (!vdev) {
-		printk(KERN_ERR "VP_IDE %s: out of memory :(\n", pci_name(dev));
+		printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
+			pci_name(dev));
 		return -ENOMEM;
 	}
 
-- 
cgit v1.2.3


From a326b02b0c576001353dbc489154959b0889c6bf Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:33 +0200
Subject: ide: drop 'name' parameter from ->init_chipset method

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/aec62xx.c      |  2 +-
 drivers/ide/pci/alim15x3.c     |  5 ++---
 drivers/ide/pci/amd74xx.c      | 19 ++++++++-----------
 drivers/ide/pci/cmd64x.c       |  2 +-
 drivers/ide/pci/cs5530.c       |  7 +++----
 drivers/ide/pci/cy82c693.c     | 10 +++++-----
 drivers/ide/pci/hpt34x.c       |  2 +-
 drivers/ide/pci/hpt366.c       |  3 ++-
 drivers/ide/pci/it821x.c       |  2 +-
 drivers/ide/pci/pdc202xx_new.c |  3 ++-
 drivers/ide/pci/pdc202xx_old.c |  3 +--
 drivers/ide/pci/piix.c         |  3 +--
 drivers/ide/pci/serverworks.c  |  6 +++---
 drivers/ide/pci/siimage.c      |  8 +++-----
 drivers/ide/pci/sis5513.c      |  3 +--
 drivers/ide/pci/sl82c105.c     |  2 +-
 drivers/ide/pci/via82cxxx.c    |  3 +--
 drivers/ide/setup-pci.c        |  2 +-
 include/linux/ide.h            |  2 +-
 19 files changed, 39 insertions(+), 48 deletions(-)

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index f6dc6c20f3a..e0c8fe7d9fe 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -140,7 +140,7 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
 }
 
-static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev)
 {
 	/* These are necessary to get AEC6280 Macintosh cards to work */
 	if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index a099c4dd599..b582687e0cd 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -209,13 +209,12 @@ static int ali15x3_dma_setup(ide_drive_t *drive)
 /**
  *	init_chipset_ali15x3	-	Initialise an ALi IDE controller
  *	@dev: PCI device
- *	@name: Name of the controller
  *
  *	This function initializes the ALI IDE controller and where 
  *	appropriate also sets up the 1533 southbridge.
  */
-  
-static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const char *name)
+
+static unsigned int __devinit init_chipset_ali15x3(struct pci_dev *dev)
 {
 	unsigned long flags;
 	u8 tmpbyte;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index cbf78edfe00..2cea7bf51a0 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -112,15 +112,13 @@ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	amd_set_drive(drive, XFER_PIO_0 + pio);
 }
 
-static void __devinit amd7409_cable_detect(struct pci_dev *dev,
-					   const char *name)
+static void __devinit amd7409_cable_detect(struct pci_dev *dev)
 {
 	/* no host side cable detection */
 	amd_80w = 0x03;
 }
 
-static void __devinit amd7411_cable_detect(struct pci_dev *dev,
-					   const char *name)
+static void __devinit amd7411_cable_detect(struct pci_dev *dev)
 {
 	int i;
 	u32 u = 0;
@@ -131,9 +129,9 @@ static void __devinit amd7411_cable_detect(struct pci_dev *dev,
 	amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
 	for (i = 24; i >= 0; i -= 8)
 		if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
-			printk(KERN_WARNING "%s %s: BIOS didn't set cable bits "
-				"correctly. Enabling workaround.\n",
-				name, pci_name(dev));
+			printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set "
+				"cable bits correctly. Enabling workaround.\n",
+				pci_name(dev));
 			amd_80w |= (1 << (1 - (i >> 4)));
 		}
 }
@@ -142,8 +140,7 @@ static void __devinit amd7411_cable_detect(struct pci_dev *dev,
  * The initialization callback.  Initialize drive independent registers.
  */
 
-static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
-						   const char *name)
+static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev)
 {
 	u8 t = 0, offset = amd_offset(dev);
 
@@ -156,9 +153,9 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
 		; /* no UDMA > 2 */
 	else if (dev->vendor == PCI_VENDOR_ID_AMD &&
 		 dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
-		amd7409_cable_detect(dev, name);
+		amd7409_cable_detect(dev);
 	else
-		amd7411_cable_detect(dev, name);
+		amd7411_cable_detect(dev);
 
 /*
  * Take care of prefetch & postwrite.
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 3d84debaf81..1360b4fa9fd 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -332,7 +332,7 @@ static int cmd646_1_dma_end(ide_drive_t *drive)
 	return (dma_stat & 7) != 4;
 }
 
-static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev)
 {
 	u8 mrdmode = 0;
 
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 5543c8677a5..f235db8c678 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -129,12 +129,11 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
 /**
  *	init_chipset_5530	-	set up 5530 bridge
  *	@dev: PCI device
- *	@name: device name
  *
  *	Initialize the cs5530 bridge for reliable IDE DMA operation.
  */
 
-static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cs5530(struct pci_dev *dev)
 {
 	struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
 
@@ -153,11 +152,11 @@ static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const ch
 		}
 	}
 	if (!master_0) {
-		printk(KERN_ERR "%s: unable to locate PCI MASTER function\n", name);
+		printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
 		goto out;
 	}
 	if (!cs5530_0) {
-		printk(KERN_ERR "%s: unable to locate CS5530 LEGACY function\n", name);
+		printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
 		goto out;
 	}
 
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 41c7f3351eb..bfae2f882f4 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -332,7 +332,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
 /*
  * this function is called during init and is used to setup the cy82c693 chip
  */
-static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev)
 {
 	if (PCI_FUNC(dev->devfn) != 1)
 		return 0;
@@ -351,8 +351,8 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c
 	data = inb(CY82_DATA_PORT);
 
 #if CY82C693_DEBUG_INFO
-	printk(KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n",
-		name, data);
+	printk(KERN_INFO DRV_NAME ": Peripheral Configuration Register: 0x%X\n",
+		data);
 #endif /* CY82C693_DEBUG_INFO */
 
 	/*
@@ -373,8 +373,8 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c
 	outb(data, CY82_DATA_PORT);
 
 #if CY82C693_DEBUG_INFO
-	printk(KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n",
-		name, data);
+	printk(KERN_INFO ": New Peripheral Configuration Register: 0x%X\n",
+		data);
 #endif /* CY82C693_DEBUG_INFO */
 
 #endif /* CY82C693_SETDMA_CLOCK */
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index baabb4ce0d7..6009b0b9655 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -79,7 +79,7 @@ static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
  */
 #define	HPT34X_PCI_INIT_REG		0x80
 
-static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev)
 {
 	int i = 0;
 	unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 6a1c65c3be3..5271b246b88 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -970,11 +970,12 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
 	return 1;
 }
 
-static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
 {
 	unsigned long io_base	= pci_resource_start(dev, 4);
 	struct ide_host *host	= pci_get_drvdata(dev);
 	struct hpt_info *info	= host->host_priv + (&dev->dev == host->dev[1]);
+	const char *name	= DRV_NAME;
 	u8 pci_clk,  dpll_clk	= 0;	/* PCI and DPLL clock in MHz */
 	u8 chip_type;
 	enum ata_clock	clock;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 74173352741..e16a1d113a2 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -605,7 +605,7 @@ static void __devinit it8212_disable_raid(struct pci_dev *dev)
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
 }
 
-static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev)
 {
 	u8 conf;
 	static char *mode[2] = { "pass through", "smart" };
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 1f679195722..998615fa285 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -326,8 +326,9 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev)
 }
 #endif /* CONFIG_PPC_PMAC */
 
-static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev)
 {
+	const char *name = DRV_NAME;
 	unsigned long dma_base = pci_resource_start(dev, 4);
 	unsigned long sec_dma_base = dma_base + 0x08;
 	long pll_input, pll_output, ratio;
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index da92d127868..6ff2def58da 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -265,8 +265,7 @@ static void pdc202xx_dma_timeout(ide_drive_t *drive)
 	ide_dma_timeout(drive);
 }
 
-static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
-						    const char *name)
+static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev)
 {
 	unsigned long dmabase = pci_resource_start(dev, 4);
 	u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 9eb411f5c35..7fc3022dcf6 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -200,13 +200,12 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
 /**
  *	init_chipset_ich	-	set up the ICH chipset
  *	@dev: PCI device to set up
- *	@name: Name of the device
  *
  *	Initialize the PCI device as required.  For the ICH this turns
  *	out to be nice and simple.
  */
 
-static unsigned int __devinit init_chipset_ich(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_ich(struct pci_dev *dev)
 {
 	u32 extra = 0;
 
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index e26bc8326db..d173f293772 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -174,7 +174,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	pci_write_config_byte(dev, 0x54, ultra_enable);
 }
 
-static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_svwks(struct pci_dev *dev)
 {
 	unsigned int reg;
 	u8 btr;
@@ -190,8 +190,8 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
 			pci_read_config_dword(isa_dev, 0x64, &reg);
 			reg &= ~0x00002000; /* disable 600ns interrupt mask */
 			if(!(reg & 0x00004000))
-				printk(KERN_DEBUG "%s %s: UDMA not BIOS "
-					"enabled.\n", name, pci_name(dev));
+				printk(KERN_DEBUG DRV_NAME " %s: UDMA not BIOS "
+					"enabled.\n", pci_name(dev));
 			reg |=  0x00004000; /* enable UDMA/33 support */
 			pci_write_config_dword(isa_dev, 0x64, reg);
 		}
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 572b479a392..b8ad9ad6cf0 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -457,14 +457,12 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
 /**
  *	init_chipset_siimage	-	set up an SI device
  *	@dev: PCI device
- *	@name: device name
  *
  *	Perform the initial PCI set up for this device. Attempt to switch
  *	to 133 MHz clocking if the system isn't already set up to do it.
  */
 
-static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
-						   const char *name)
+static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev)
 {
 	struct ide_host *host = pci_get_drvdata(dev);
 	void __iomem *ioaddr = host->host_priv;
@@ -541,8 +539,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
 			{ "== 100", "== 133", "== 2X PCI", "DISABLED!" };
 
 		tmp >>= 4;
-		printk(KERN_INFO "%s %s: BASE CLOCK %s\n",
-			name, pci_name(dev), clk_str[tmp & 3]);
+		printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
+			pci_name(dev), clk_str[tmp & 3]);
 	}
 
 	return 0;
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 6fcb46c8787..cc95f90b53b 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -448,8 +448,7 @@ static int __devinit sis_find_family(struct pci_dev *dev)
 	return chipset_family;
 }
 
-static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev,
-						   const char *name)
+static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev)
 {
 	/* Make general config ops here
 	   1/ tell IDE channels to operate in Compatibility mode only
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index fa720db3de1..73905bcc08f 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -272,7 +272,7 @@ static u8 sl82c105_bridge_revision(struct pci_dev *dev)
  * channel 0 here at least, but channel 1 has to be enabled by
  * firmware or arch code. We still set both to 16 bits mode.
  */
-static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const char *msg)
+static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev)
 {
 	u32 val;
 
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 170e058f1fb..454d2bf62dc 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -262,13 +262,12 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
 /**
  *	init_chipset_via82cxxx	-	initialization handler
  *	@dev: PCI device
- *	@name: Name of interface
  *
  *	The initialization callback. Here we determine the IDE chip type
  *	and initialize its drive independent registers.
  */
 
-static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev)
 {
 	struct ide_host *host = pci_get_drvdata(dev);
 	struct via82cxxx_dev *vdev = host->host_priv;
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index d9655aeb013..a8e9e8a69a5 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -515,7 +515,7 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 	 * space, place chipset into init-mode, and/or preserve
 	 * an interrupt if the card is not native ide support.
 	 */
-	ret = d->init_chipset ? d->init_chipset(dev, d->name) : 0;
+	ret = d->init_chipset ? d->init_chipset(dev) : 0;
 	if (ret < 0)
 		goto out;
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index fd78b401b03..b846bc44a27 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1206,7 +1206,7 @@ enum {
 
 struct ide_port_info {
 	char			*name;
-	unsigned int		(*init_chipset)(struct pci_dev *, const char *);
+	unsigned int		(*init_chipset)(struct pci_dev *);
 	void			(*init_iops)(ide_hwif_t *);
 	void                    (*init_hwif)(ide_hwif_t *);
 	int			(*init_dma)(ide_hwif_t *,
-- 
cgit v1.2.3


From cd740ab0f69f6c94d9c7f916758e308f30a439fa Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Thu, 24 Jul 2008 22:53:33 +0200
Subject: ide: ide-tape.c sparse annotations and unaligned access removal

If this is actually unaligned the access of speed/max_speed above
is already broken and needs a get_unaligned.  Otherwise it is
aligned and they can be removed.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 789f3428f07..82c2afe4d28 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -655,10 +655,10 @@ static void ide_tape_callback(ide_drive_t *drive)
 			uptodate = 0;
 		} else {
 			debug_log(DBG_SENSE, "Block Location - %u\n",
-					be32_to_cpu(*(u32 *)&readpos[4]));
+					be32_to_cpup((__be32 *)&readpos[4]));
 
 			tape->partition = readpos[1];
-			tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]);
+			tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]);
 			set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
 		}
 	}
@@ -2381,23 +2381,23 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
 	caps = pc.buf + 4 + pc.buf[3];
 
 	/* convert to host order and save for later use */
-	speed = be16_to_cpu(*(u16 *)&caps[14]);
-	max_speed = be16_to_cpu(*(u16 *)&caps[8]);
+	speed = be16_to_cpup((__be16 *)&caps[14]);
+	max_speed = be16_to_cpup((__be16 *)&caps[8]);
 
-	put_unaligned(max_speed, (u16 *)&caps[8]);
-	put_unaligned(be16_to_cpu(*(u16 *)&caps[12]), (u16 *)&caps[12]);
-	put_unaligned(speed, (u16 *)&caps[14]);
-	put_unaligned(be16_to_cpu(*(u16 *)&caps[16]), (u16 *)&caps[16]);
+	*(u16 *)&caps[8] = max_speed;
+	*(u16 *)&caps[12] = be16_to_cpup((__be16 *)&caps[12]);
+	*(u16 *)&caps[14] = speed;
+	*(u16 *)&caps[16] = be16_to_cpup((__be16 *)&caps[16]);
 
 	if (!speed) {
 		printk(KERN_INFO "ide-tape: %s: invalid tape speed "
 				"(assuming 650KB/sec)\n", drive->name);
-		put_unaligned(650, (u16 *)&caps[14]);
+		*(u16 *)&caps[14] = 650;
 	}
 	if (!max_speed) {
 		printk(KERN_INFO "ide-tape: %s: invalid max_speed "
 				"(assuming 650KB/sec)\n", drive->name);
-		put_unaligned(650, (u16 *)&caps[8]);
+		*(u16 *)&caps[8] = 650;
 	}
 
 	memcpy(&tape->caps, caps, 20);
-- 
cgit v1.2.3


From 7fa897b91a3ea0f16c2873b869d7a0eef05acff4 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Thu, 24 Jul 2008 22:53:34 +0200
Subject: ide: trivial sparse annotations

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-dma.c  | 2 +-
 drivers/ide/ide-iops.c | 6 ++----
 drivers/ide/ide-proc.c | 4 ++--
 3 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index be99d463dcc..71c377a7bcf 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -173,7 +173,7 @@ EXPORT_SYMBOL_GPL(ide_build_sglist);
 int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned int *table	= hwif->dmatable_cpu;
+	__le32 *table = (__le32 *)hwif->dmatable_cpu;
 	unsigned int is_trm290	= (hwif->chipset == ide_trm290) ? 1 : 0;
 	unsigned int count = 0;
 	int i;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 07da5fb9eaf..8aae9176451 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -510,10 +510,8 @@ void ide_fixstring (u8 *s, const int bytecount, const int byteswap)
 
 	if (byteswap) {
 		/* convert from big-endian to host byte order */
-		for (p = end ; p != s;) {
-			unsigned short *pp = (unsigned short *) (p -= 2);
-			*pp = ntohs(*pp);
-		}
+		for (p = end ; p != s;)
+			be16_to_cpus((u16 *)(p -= 2));
 	}
 	/* strip leading blanks */
 	while (s != end && *s == ' ')
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 151c91e933d..f66c9c3f6fc 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -105,7 +105,7 @@ static int proc_ide_read_identify
 	len = sprintf(page, "\n");
 
 	if (drive) {
-		unsigned short *val = (unsigned short *) page;
+		__le16 *val = (__le16 *)page;
 
 		err = taskfile_lib_get_identify(drive, page);
 		if (!err) {
@@ -113,7 +113,7 @@ static int proc_ide_read_identify
 			page = out;
 			do {
 				out += sprintf(out, "%04x%c",
-					le16_to_cpu(*val), (++i & 7) ? ' ' : '\n');
+					le16_to_cpup(val), (++i & 7) ? ' ' : '\n');
 				val += 1;
 			} while (i < (SECTOR_WORDS * 2));
 			len = out - page;
-- 
cgit v1.2.3


From a0f403bc58dcaa118f02ec70c3ecfec1bc26e445 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Thu, 24 Jul 2008 22:53:34 +0200
Subject: palm_bk3710: add UltraDMA/100 support

This controller supports UltraDMA up to mode 5 but it should be clocked with
at least twice the data strobe frequency, so enable mode 5 for 100+ MHz IDECLK.

While at it, start passing the correct device to clk_get() -- it worked anyway
but WTF? :-/

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/palm_bk3710.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 65bb4b8fd57..3e842d60eae 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -82,6 +82,7 @@ static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
 	{100, 120},		/* UDMA Mode 2 */
 	{100, 90},		/* UDMA Mode 3 */
 	{100, 60},		/* UDMA Mode 4 */
+	{85,  40},		/* UDMA Mode 5 */
 };
 
 static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
@@ -334,12 +335,11 @@ static const struct ide_port_ops palm_bk3710_ports_ops = {
 	.cable_detect		= palm_bk3710_cable_detect,
 };
 
-static const struct ide_port_info __devinitdata palm_bk3710_port_info = {
+static struct ide_port_info __devinitdata palm_bk3710_port_info = {
 	.init_dma		= palm_bk3710_init_dma,
 	.port_ops		= &palm_bk3710_ports_ops,
 	.host_flags		= IDE_HFLAG_MMIO,
 	.pio_mask		= ATA_PIO4,
-	.udma_mask		= ATA_UDMA4,	/* (input clk 99MHz) */
 	.mwdma_mask		= ATA_MWDMA2,
 };
 
@@ -352,7 +352,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
-	clk = clk_get(NULL, "IDECLK");
+	clk = clk_get(&pdev->dev, "IDECLK");
 	if (IS_ERR(clk))
 		return -ENODEV;
 
@@ -392,6 +392,9 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 	hw.irq = irq->start;
 	hw.chipset = ide_palm3710;
 
+	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
+							     ATA_UDMA5;
+
 	rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
 	if (rc)
 		goto out;
-- 
cgit v1.2.3


From 96cc112c09b3c6674da01ef8b377f7a916883ea2 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:34 +0200
Subject: gayle: release resources on ide_host_add() failure

"gayle: reserve memory resources at once" patch temporary removed
freeing of resources on failure (to ease convertion to ide_host_add()
interface).  This patch fixes it.

Thanks to Geert for noticing the issue.

Noticed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/legacy/gayle.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index dd5c467d8dd..51ba085d7aa 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -127,7 +127,7 @@ static int __init gayle_init(void)
     unsigned long phys_base, res_start, res_n;
     unsigned long base, ctrlport, irqport;
     ide_ack_intr_t *ack_intr;
-    int a4000, i;
+    int a4000, i, rc;
     hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
 
     if (!MACH_IS_AMIGA)
@@ -179,7 +179,11 @@ found:
 	hws[i] = &hw[i];
     }
 
-    return ide_host_add(NULL, hws, NULL);
+    rc = ide_host_add(NULL, hws, NULL);
+    if (rc)
+	release_mem_region(res_start, res_n);
+
+    return rc;
 }
 
 module_init(gayle_init);
-- 
cgit v1.2.3


From e8e7b9eb11c34ee18bde8b7011af41938d1ad667 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Thu, 24 Jul 2008 22:53:35 +0200
Subject: ide-cd: fix oops when using growisofs

cdrom_read_capacity() will blindly return the capacity from the device
without sanity-checking it.  This later causes code in fs/buffer.c to
oops.

Fix this by checking that the device is telling us sensible things.

From: Jens Axboe <jens.axboe@oracle.com>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@kernel.org>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[bart: print device name instead of driver name]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
[harvey: blocklen is a big-endian value]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 8f253e5f26a..e617cf08aef 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1311,13 +1311,30 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 
 	stat = ide_cd_queue_pc(drive, cmd, 0, &capbuf, &len, sense, 0,
 			       REQ_QUIET);
-	if (stat == 0) {
-		*capacity = 1 + be32_to_cpu(capbuf.lba);
-		*sectors_per_frame =
-			be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS;
+	if (stat)
+		return stat;
+
+	/*
+	 * Sanity check the given block size
+	 */
+	switch (capbuf.blocklen) {
+	case __constant_cpu_to_be32(512):
+	case __constant_cpu_to_be32(1024):
+	case __constant_cpu_to_be32(2048):
+	case __constant_cpu_to_be32(4096):
+		break;
+	default:
+		printk(KERN_ERR "%s: weird block size %u\n",
+			drive->name, capbuf.blocklen);
+		printk(KERN_ERR "%s: default to 2kb block size\n",
+			drive->name);
+		capbuf.blocklen = __constant_cpu_to_be32(2048);
+		break;
 	}
 
-	return stat;
+	*capacity = 1 + be32_to_cpu(capbuf.lba);
+	*sectors_per_frame = be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS;
+	return 0;
 }
 
 static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
-- 
cgit v1.2.3


From eb34b2d90e71380ad19695188934230b06a3668b Mon Sep 17 00:00:00 2001
From: Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl>
Date: Thu, 24 Jul 2008 22:53:35 +0200
Subject: ht6560b: update email address

Update email address.

From: Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/legacy/ht6560b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 7bc8fd59ea9..7262b3ad45c 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -30,7 +30,7 @@
  *  Use hdparm utility to enable PIO mode support.
  *
  *  Author:    Mikko Ala-Fossi            <maf@iki.fi>
- *             Jan Evert van Grootheest   <janevert@caiway.nl>
+ *             Jan Evert van Grootheest   <j.e.van.grootheest@caiway.nl>
  *
  *  Try:  http://www.maf.iki.fi/~maf/ht6560b/
  */
-- 
cgit v1.2.3


From 216f9a88feabf5ed574c3aa78447a6bd872910bc Mon Sep 17 00:00:00 2001
From: Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl>
Date: Thu, 24 Jul 2008 22:53:35 +0200
Subject: ht6560b: remove old history

Remove the ancient version history. Git does a better job.

From: Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/legacy/ht6560b.c | 22 ----------------------
 1 file changed, 22 deletions(-)

diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 7262b3ad45c..98f7c95e39e 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -3,28 +3,6 @@
  */
 
 /*
- *
- *  Version 0.01        Initial version hacked out of ide.c
- *
- *  Version 0.02        Added support for PIO modes, auto-tune
- *
- *  Version 0.03        Some cleanups
- *
- *  Version 0.05        PIO mode cycle timings auto-tune using bus-speed
- *
- *  Version 0.06        Prefetch mode now defaults no OFF. To set
- *                      prefetch mode OFF/ON use "hdparm -p8/-p9".
- *                      Unmask irq is disabled when prefetch mode
- *                      is enabled.
- *
- *  Version 0.07        Trying to fix CD-ROM detection problem.
- *                      "Prefetch" mode bit OFF for ide disks and
- *                      ON for anything else.
- *
- *  Version 0.08        Need to force prefetch for CDs and other non-disk
- *                      devices. (not sure which devices exactly need
- *                      prefetch)
- *
  *  HT-6560B EIDE-controller support
  *  To activate controller support use kernel parameter "ide0=ht6560b".
  *  Use hdparm utility to enable PIO mode support.
-- 
cgit v1.2.3


From e27420d046600cd3e4139ea1b6cba59a8b4050eb Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 24 Jul 2008 22:53:35 +0200
Subject: ide-scsi: remove kmalloced struct request

This converts ide-scsi to use blk_get/put_request instead of
kmalloc/kfree.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/scsi/ide-scsi.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 318ef382448..b40a673985a 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -207,15 +207,15 @@ static int idescsi_check_condition(ide_drive_t *drive,
 
 	/* stuff a sense request in front of our current request */
 	pc = kzalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC);
-	rq = kmalloc(sizeof(struct request), GFP_ATOMIC);
+	rq = blk_get_request(drive->queue, READ, GFP_ATOMIC);
 	buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC);
 	if (!pc || !rq || !buf) {
 		kfree(buf);
-		kfree(rq);
+		if (rq)
+			blk_put_request(rq);
 		kfree(pc);
 		return -ENOMEM;
 	}
-	blk_rq_init(NULL, rq);
 	rq->special = (char *) pc;
 	pc->rq = rq;
 	pc->buf = buf;
@@ -232,6 +232,7 @@ static int idescsi_check_condition(ide_drive_t *drive,
 		ide_scsi_hex_dump(pc->c, 6);
 	}
 	rq->rq_disk = scsi->disk;
+	rq->ref_count++;
 	memcpy(rq->cmd, pc->c, 12);
 	ide_do_drive_cmd(drive, rq);
 	return 0;
@@ -278,7 +279,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
 			SCSI_SENSE_BUFFERSIZE);
 		kfree(pc->buf);
 		kfree(pc);
-		kfree(rq);
+		blk_put_request(rq);
 		pc = opc;
 		rq = pc->rq;
 		pc->scsi_cmd->result = (CHECK_CONDITION << 1) |
@@ -309,7 +310,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
 	pc->done(pc->scsi_cmd);
 	spin_unlock_irqrestore(host->host_lock, flags);
 	kfree(pc);
-	kfree(rq);
+	blk_put_request(rq);
 	scsi->pc = NULL;
 	return 0;
 }
@@ -583,6 +584,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
 	ide_drive_t *drive = scsi->drive;
 	struct request *rq = NULL;
 	struct ide_atapi_pc *pc = NULL;
+	int write = cmd->sc_data_direction == DMA_TO_DEVICE;
 
 	if (!drive) {
 		scmd_printk (KERN_ERR, cmd, "drive not present\n");
@@ -590,7 +592,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
 	}
 	scsi = drive_to_idescsi(drive);
 	pc = kmalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC);
-	rq = kmalloc(sizeof(struct request), GFP_ATOMIC);
+	rq = blk_get_request(drive->queue, write, GFP_ATOMIC);
 	if (rq == NULL || pc == NULL) {
 		printk (KERN_ERR "ide-scsi: %s: out of memory\n", drive->name);
 		goto abort;
@@ -620,17 +622,18 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
 		}
 	}
 
-	blk_rq_init(NULL, rq);
 	rq->special = (char *) pc;
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	spin_unlock_irq(host->host_lock);
+	rq->ref_count++;
 	memcpy(rq->cmd, pc->c, 12);
 	blk_execute_rq_nowait(drive->queue, scsi->disk, rq, 0, NULL);
 	spin_lock_irq(host->host_lock);
 	return 0;
 abort:
 	kfree (pc);
-	kfree (rq);
+	if (rq)
+		blk_put_request(rq);
 	cmd->result = DID_ERROR << 16;
 	done(cmd);
 	return 0;
@@ -678,7 +681,9 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd)
 
 		if (blk_sense_request(scsi->pc->rq))
 			kfree(scsi->pc->buf);
-		kfree(scsi->pc->rq);
+		/* we need to call blk_put_request twice. */
+		blk_put_request(scsi->pc->rq);
+		blk_put_request(scsi->pc->rq);
 		kfree(scsi->pc);
 		scsi->pc = NULL;
 
@@ -730,7 +735,7 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd)
 		kfree(scsi->pc->buf);
 	kfree(scsi->pc);
 	scsi->pc = NULL;
-	kfree(req);
+	blk_put_request(req);
 
 	/* now nuke the drive queue */
 	while ((req = elv_next_request(drive->queue))) {
-- 
cgit v1.2.3


From 90d2c6bc68745d67cdbf00bab43818d90aa0dfb6 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:36 +0200
Subject: ide: enable local IRQs in all handlers for TASKFILE_NO_DATA data
 phase

It is already done by task_no_data_intr() and there is no reason
not to do it in other TASKFILE_NO_DATA data phase handlers.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-taskfile.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index aeddbbd69e8..7fb6f1c8627 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -126,7 +126,10 @@ EXPORT_SYMBOL_GPL(do_rw_taskfile);
 static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	u8 stat = hwif->tp_ops->read_status(hwif);
+	u8 stat;
+
+	local_irq_enable_in_hardirq();
+	stat = hwif->tp_ops->read_status(hwif);
 
 	if (OK_STAT(stat, READY_STAT, BAD_STAT))
 		drive->mult_count = drive->mult_req;
@@ -147,6 +150,8 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
 	int retries = 5;
 	u8 stat;
 
+	local_irq_enable_in_hardirq();
+
 	while (1) {
 		stat = hwif->tp_ops->read_status(hwif);
 		if ((stat & BUSY_STAT) == 0 || retries-- == 0)
@@ -170,7 +175,10 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
 static ide_startstop_t recal_intr(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	u8 stat = hwif->tp_ops->read_status(hwif);
+	u8 stat;
+
+	local_irq_enable_in_hardirq();
+	stat = hwif->tp_ops->read_status(hwif);
 
 	if (!OK_STAT(stat, READY_STAT, BAD_STAT))
 		return ide_error(drive, "recal_intr", stat);
-- 
cgit v1.2.3


From d0b53f6866fa185da94968e62ae97923db18298c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:36 +0200
Subject: ide: remove stale comments from drivers/ide/Makefile

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/Makefile | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 5d414e301a5..64e0ecdc4ed 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -1,13 +1,6 @@
 #
-# Makefile for the kernel ata, atapi, and ide block device drivers.
-#
-# 12 September 2000, Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
-# Rewritten to use lists instead of if-statements.
-#
-# Note : at this point, these files are compiled on all systems.
-# In the future, some of these should be built conditionally.
-#
 # link order is important here
+#
 
 EXTRA_CFLAGS				+= -Idrivers/ide
 
-- 
cgit v1.2.3


From 52f3a771feafe3e9c56f8d00c8eb53fd8f578f2d Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:36 +0200
Subject: ide: fix for EATA SCSI HBA in ATA emulating mode

IDE probing code used to skip devices attached to EATA SCSI HBA
in ATA emulating mode but because of warm-plug support port I/O
resources are no longer freed if no devices are detected on a port
and the decision about the driver to use is left up to the user.

Remove no longer valid EATA SCSI HBA quirk from do_identify().

Noticed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index f0c162488ec..d227fe425d2 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -134,18 +134,6 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 #endif
 	ide_fix_driveid(id);
 
-#if defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA)
-	/*
-	 * EATA SCSI controllers do a hardware ATA emulation:
-	 * Ignore them if there is a driver for them available.
-	 */
-	if ((id->model[0] == 'P' && id->model[1] == 'M') ||
-	    (id->model[0] == 'S' && id->model[1] == 'K')) {
-		printk("%s: EATA SCSI HBA %.10s\n", drive->name, id->model);
-		goto err_misc;
-	}
-#endif /* CONFIG_SCSI_EATA || CONFIG_SCSI_EATA_PIO */
-
 	/*
 	 *  WIN_IDENTIFY returns little-endian info,
 	 *  WIN_PIDENTIFY *usually* returns little-endian info.
-- 
cgit v1.2.3


From 1b8ebad87b459e2e1333fbf28005977245ff5402 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 24 Jul 2008 22:53:36 +0200
Subject: ide: use proper printk() KERN_* levels in ide-probe.c

While at it:

- fixup printk() messages in save_match() and hwif_init().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c | 51 +++++++++++++++++++++++++++----------------------
 1 file changed, 28 insertions(+), 23 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index d227fe425d2..994e41099b4 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -155,7 +155,8 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 	if (strstr(id->model, "E X A B Y T E N E S T"))
 		goto err_misc;
 
-	printk("%s: %s, ", drive->name, id->model);
+	printk(KERN_INFO "%s: %s, ", drive->name, id->model);
+
 	drive->present = 1;
 	drive->dead = 0;
 
@@ -164,16 +165,17 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 	 */
 	if (cmd == WIN_PIDENTIFY) {
 		u8 type = (id->config >> 8) & 0x1f;
-		printk("ATAPI ");
+
+		printk(KERN_CONT "ATAPI ");
 		switch (type) {
 			case ide_floppy:
 				if (!strstr(id->model, "CD-ROM")) {
 					if (!strstr(id->model, "oppy") &&
 					    !strstr(id->model, "poyp") &&
 					    !strstr(id->model, "ZIP"))
-						printk("cdrom or floppy?, assuming ");
+						printk(KERN_CONT "cdrom or floppy?, assuming ");
 					if (drive->media != ide_cdrom) {
-						printk ("FLOPPY");
+						printk(KERN_CONT "FLOPPY");
 						drive->removable = 1;
 						break;
 					}
@@ -186,25 +188,25 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 				/* kludge for Apple PowerBook internal zip */
 				if (!strstr(id->model, "CD-ROM") &&
 				    strstr(id->model, "ZIP")) {
-					printk ("FLOPPY");
+					printk(KERN_CONT "FLOPPY");
 					type = ide_floppy;
 					break;
 				}
 #endif
-				printk ("CD/DVD-ROM");
+				printk(KERN_CONT "CD/DVD-ROM");
 				break;
 			case ide_tape:
-				printk ("TAPE");
+				printk(KERN_CONT "TAPE");
 				break;
 			case ide_optical:
-				printk ("OPTICAL");
+				printk(KERN_CONT "OPTICAL");
 				drive->removable = 1;
 				break;
 			default:
-				printk("UNKNOWN (type %d)", type);
+				printk(KERN_CONT "UNKNOWN (type %d)", type);
 				break;
 		}
-		printk (" drive\n");
+		printk(KERN_CONT " drive\n");
 		drive->media = type;
 		/* an ATAPI device ignores DRDY */
 		drive->ready_stat = 0;
@@ -224,7 +226,9 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 		drive->removable = 1;
 
 	drive->media = ide_disk;
-	printk("%s DISK drive\n", (id->config == 0x848a) ? "CFA" : "ATA" );
+
+	printk(KERN_CONT "%s DISK drive\n",
+		(id->config == 0x848a) ? "CFA" : "ATA");
 
 	return;
 
@@ -375,7 +379,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
 				/* Mmmm.. multiple IRQs..
 				 * don't know which was ours
 				 */
-				printk("%s: IRQ probe failed (0x%lx)\n",
+				printk(KERN_ERR "%s: IRQ probe failed (0x%lx)\n",
 					drive->name, cookie);
 			}
 		}
@@ -444,7 +448,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			return 4;
 	}
 #ifdef DEBUG
-	printk("probing for %s: present=%d, media=%d, probetype=%s\n",
+	printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n",
 		drive->name, drive->present, drive->media,
 		(cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI");
 #endif
@@ -522,7 +526,8 @@ static void enable_nest (ide_drive_t *drive)
 	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 	u8 stat;
 
-	printk("%s: enabling %s -- ", hwif->name, drive->id->model);
+	printk(KERN_INFO "%s: enabling %s -- ", hwif->name, drive->id->model);
+
 	SELECT_DRIVE(drive);
 	msleep(50);
 	tp_ops->exec_command(hwif, EXABYTE_ENABLE_NEST);
@@ -871,7 +876,7 @@ static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match)
 	if (m && m->hwgroup && m->hwgroup != new->hwgroup) {
 		if (!new->hwgroup)
 			return;
-		printk("%s: potential irq problem with %s and %s\n",
+		printk(KERN_WARNING "%s: potential IRQ problem with %s and %s\n",
 			hwif->name, new->name, m->name);
 	}
 	if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */
@@ -1130,17 +1135,17 @@ static int init_irq (ide_hwif_t *hwif)
 	}
 
 #if !defined(__mc68000__)
-	printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
+	printk(KERN_INFO "%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
 		io_ports->data_addr, io_ports->status_addr,
 		io_ports->ctl_addr, hwif->irq);
 #else
-	printk("%s at 0x%08lx on irq %d", hwif->name,
+	printk(KERN_INFO "%s at 0x%08lx on irq %d", hwif->name,
 		io_ports->data_addr, hwif->irq);
 #endif /* __mc68000__ */
 	if (match)
-		printk(" (%sed with %s)",
+		printk(KERN_CONT " (%sed with %s)",
 			hwif->sharing_irq ? "shar" : "serializ", match->name);
-	printk("\n");
+	printk(KERN_CONT "\n");
 
 	mutex_unlock(&ide_cfg_mtx);
 	return 0;
@@ -1275,7 +1280,7 @@ static int hwif_init(ide_hwif_t *hwif)
 	if (!hwif->irq) {
 		hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
 		if (!hwif->irq) {
-			printk("%s: DISABLED, NO IRQ\n", hwif->name);
+			printk(KERN_ERR "%s: disabled, no IRQ\n", hwif->name);
 			return 0;
 		}
 	}
@@ -1305,16 +1310,16 @@ static int hwif_init(ide_hwif_t *hwif)
 	 */
 	hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
 	if (!hwif->irq) {
-		printk("%s: Disabled unable to get IRQ %d.\n",
+		printk(KERN_ERR "%s: disabled, unable to get IRQ %d\n",
 			hwif->name, old_irq);
 		goto out;
 	}
 	if (init_irq(hwif)) {
-		printk("%s: probed IRQ %d and default IRQ %d failed.\n",
+		printk(KERN_ERR "%s: probed IRQ %d and default IRQ %d failed\n",
 			hwif->name, old_irq, hwif->irq);
 		goto out;
 	}
-	printk("%s: probed IRQ %d failed, using default.\n",
+	printk(KERN_WARNING "%s: probed IRQ %d failed, using default\n",
 		hwif->name, hwif->irq);
 
 done:
-- 
cgit v1.2.3


From b30f3ae50cd03ef2ff433a5030fbf88dd8323528 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 24 Jul 2008 15:43:44 -0700
Subject: x86-64: Clean up 'save/restore_i387()' usage

Suresh Siddha wants to fix a possible FPU leakage in error conditions,
but the fact that save/restore_i387() are inlines in a header file makes
that harder to do than necessary.  So start off with an obvious cleanup.

This just moves the x86-64 version of save/restore_i387() out of the
header file, and moves it to the only file that it is actually used in:
arch/x86/kernel/signal_64.c.  So exposing it in a header file was wrong
to begin with.

[ Side note: I'd like to fix up some of the games we play with the
  32-bit version of these functions too, but that's a separate
  matter.  The 32-bit versions are shared - under different names
  at that! - by both the native x86-32 code and the x86-64 32-bit
  compatibility code ]

Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/signal_64.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
 include/asm-x86/i387.h      | 54 ---------------------------------------------
 2 files changed, 53 insertions(+), 54 deletions(-)

diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index 47c3d249e63..b45ef8ddd65 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -53,6 +53,59 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 	return do_sigaltstack(uss, uoss, regs->sp);
 }
 
+/*
+ * Signal frame handlers.
+ */
+
+static inline int save_i387(struct _fpstate __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err = 0;
+
+	BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
+			sizeof(tsk->thread.xstate->fxsave));
+
+	if ((unsigned long)buf % 16)
+		printk("save_i387: bad fpstate %p\n", buf);
+
+	if (!used_math())
+		return 0;
+	clear_used_math(); /* trigger finit */
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		err = save_i387_checking((struct i387_fxsave_struct __user *)
+					 buf);
+		if (err)
+			return err;
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		stts();
+	} else {
+		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
+				   sizeof(struct i387_fxsave_struct)))
+			return -1;
+	}
+	return 1;
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+static inline int restore_i387(struct _fpstate __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err;
+
+	if (!used_math()) {
+		err = init_fpu(tsk);
+		if (err)
+			return err;
+	}
+
+	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+		clts();
+		task_thread_info(current)->status |= TS_USEDFPU;
+	}
+	return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+}
 
 /*
  * Do a signal return; undo the signal stack.
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index 37672f79dcc..96fa8449ff1 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -137,60 +137,6 @@ static inline void __save_init_fpu(struct task_struct *tsk)
 	task_thread_info(tsk)->status &= ~TS_USEDFPU;
 }
 
-/*
- * Signal frame handlers.
- */
-
-static inline int save_i387(struct _fpstate __user *buf)
-{
-	struct task_struct *tsk = current;
-	int err = 0;
-
-	BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
-			sizeof(tsk->thread.xstate->fxsave));
-
-	if ((unsigned long)buf % 16)
-		printk("save_i387: bad fpstate %p\n", buf);
-
-	if (!used_math())
-		return 0;
-	clear_used_math(); /* trigger finit */
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
-		err = save_i387_checking((struct i387_fxsave_struct __user *)
-					 buf);
-		if (err)
-			return err;
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
-	} else {
-		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
-				   sizeof(struct i387_fxsave_struct)))
-			return -1;
-	}
-	return 1;
-}
-
-/*
- * This restores directly out of user space. Exceptions are handled.
- */
-static inline int restore_i387(struct _fpstate __user *buf)
-{
-	struct task_struct *tsk = current;
-	int err;
-
-	if (!used_math()) {
-		err = init_fpu(tsk);
-		if (err)
-			return err;
-	}
-
-	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
-		clts();
-		task_thread_info(current)->status |= TS_USEDFPU;
-	}
-	return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
-}
-
 #else  /* CONFIG_X86_32 */
 
 extern void finit(void);
-- 
cgit v1.2.3


From 4b9f12a3779c548b68bc9af7d94030868ad3aa1b Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 24 Jul 2008 17:29:00 -0700
Subject: x86/oprofile/nmi_int: add Nehalem to list of ppro cores

..otherwise oprofile will fall back on that poor timer interrupt.

Also replace the unreadable chain of if-statements with a "switch()"
statement instead. It generates better code, and is a lot clearer.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/oprofile/nmi_int.c | 36 +++++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 7f3329b55d2..3f90289410e 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -369,20 +369,34 @@ static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
-	if (cpu_model == 14)
+	switch (cpu_model) {
+	case 0 ... 2:
+		*cpu_type = "i386/ppro";
+		break;
+	case 3 ... 5:
+		*cpu_type = "i386/pii";
+		break;
+	case 6 ... 8:
+		*cpu_type = "i386/piii";
+		break;
+	case 9:
+		*cpu_type = "i386/p6_mobile";
+		break;
+	case 10 ... 13:
+		*cpu_type = "i386/p6";
+		break;
+	case 14:
 		*cpu_type = "i386/core";
-	else if (cpu_model == 15 || cpu_model == 23)
+		break;
+	case 15: case 23:
+		*cpu_type = "i386/core_2";
+		break;
+	case 26:
 		*cpu_type = "i386/core_2";
-	else if (cpu_model > 0xd)
+		break;
+	default:
+		/* Unknown */
 		return 0;
-	else if (cpu_model == 9) {
-		*cpu_type = "i386/p6_mobile";
-	} else if (cpu_model > 5) {
-		*cpu_type = "i386/piii";
-	} else if (cpu_model > 2) {
-		*cpu_type = "i386/pii";
-	} else {
-		*cpu_type = "i386/ppro";
 	}
 
 	model = &op_ppro_spec;
-- 
cgit v1.2.3


From fb2e405fc1fc8b20d9c78eaa1c7fd5a297efde43 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 02:55:49 +0300
Subject: fix fs/nfs/nfsroot.c compilation

This fixes the following compile error caused by commit
f9247273cb69ba101877e946d2d83044409cc8c5 ("UFS: add const to parser
token table"):

    CC      fs/nfs/nfsroot.o
  /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/nfs/nfsroot.c:130: error: tokens causes a section type conflict
  make[3]: *** [fs/nfs/nfsroot.o] Error 1

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/nfs/nfsroot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c
index 46763d1cd39..8478fc25dae 100644
--- a/fs/nfs/nfsroot.c
+++ b/fs/nfs/nfsroot.c
@@ -127,7 +127,7 @@ enum {
 	Opt_err
 };
 
-static match_table_t __initdata tokens = {
+static match_table_t __initconst tokens = {
 	{Opt_port, "port=%u"},
 	{Opt_rsize, "rsize=%u"},
 	{Opt_wsize, "wsize=%u"},
-- 
cgit v1.2.3


From 9953ca6cb757fb317bb7cdd2fcbf9b88312e241b Mon Sep 17 00:00:00 2001
From: Mark McLoughlin <markmc@redhat.com>
Date: Tue, 27 May 2008 12:06:26 +0100
Subject: virtio: fix virtio_net xmit of freed skb bug

On Mon, 2008-05-26 at 17:42 +1000, Rusty Russell wrote:
> If we fail to transmit a packet, we assume the queue is full and put
> the skb into last_xmit_skb.  However, if more space frees up before we
> xmit it, we loop, and the result can be transmitting the same skb twice.
>
> Fix is simple: set skb to NULL if we've used it in some way, and check
> before sending.
...
> diff -r 564237b31993 drivers/net/virtio_net.c
> --- a/drivers/net/virtio_net.c	Mon May 19 12:22:00 2008 +1000
> +++ b/drivers/net/virtio_net.c	Mon May 19 12:24:58 2008 +1000
> @@ -287,21 +287,25 @@ again:
>  	free_old_xmit_skbs(vi);
>
>  	/* If we has a buffer left over from last time, send it now. */
> -	if (vi->last_xmit_skb) {
> +	if (unlikely(vi->last_xmit_skb)) {
>  		if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
>  			/* Drop this skb: we only queue one. */
>  			vi->dev->stats.tx_dropped++;
>  			kfree_skb(skb);
> +			skb = NULL;
>  			goto stop_queue;
>  		}
>  		vi->last_xmit_skb = NULL;

With this, may drop an skb and then later in the function discover that
we could have sent it after all. Poor wee skb :)

How about the incremental patch below?

Cheers,
Mark.

Subject: [PATCH] virtio_net: Delay dropping tx skbs

Currently we drop the skb in start_xmit() if we have a
queued buffer and fail to transmit it.

However, if we delay dropping it until we've stopped the
queue and enabled the tx notification callback, then there
is a chance space might become available for it.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/net/virtio_net.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index c28d7cb2035..06d5c43bb20 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -335,16 +335,11 @@ again:
 	free_old_xmit_skbs(vi);
 
 	/* If we has a buffer left over from last time, send it now. */
-	if (unlikely(vi->last_xmit_skb)) {
-		if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
-			/* Drop this skb: we only queue one. */
-			vi->dev->stats.tx_dropped++;
-			kfree_skb(skb);
-			skb = NULL;
-			goto stop_queue;
-		}
-		vi->last_xmit_skb = NULL;
-	}
+	if (unlikely(vi->last_xmit_skb) &&
+	    xmit_skb(vi, vi->last_xmit_skb) != 0)
+		goto stop_queue;
+
+	vi->last_xmit_skb = NULL;
 
 	/* Put new one in send queue and do transmit */
 	if (likely(skb)) {
@@ -370,6 +365,11 @@ stop_queue:
 		netif_start_queue(dev);
 		goto again;
 	}
+	if (skb) {
+		/* Drop this skb: we only queue one. */
+		vi->dev->stats.tx_dropped++;
+		kfree_skb(skb);
+	}
 	goto done;
 }
 
-- 
cgit v1.2.3


From a9ea3fc6f2654a7407864fec983d1671d775b5ee Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 18 Apr 2008 11:21:42 +0800
Subject: virtio net: Add ethtool ops for SG/GSO

This patch adds some basic ethtool operations to virtio_net so
I could test SG without GSO (which was really useful because TSO
turned out to be buggy :)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (remove MTU setting)
---
 drivers/net/virtio_net.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 06d5c43bb20..ce37a7e9541 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -19,6 +19,7 @@
 //#define DEBUG
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/ethtool.h>
 #include <linux/module.h>
 #include <linux/virtio.h>
 #include <linux/virtio_net.h>
@@ -408,6 +409,22 @@ static int virtnet_close(struct net_device *dev)
 	return 0;
 }
 
+static int virtnet_set_tx_csum(struct net_device *dev, u32 data)
+{
+	struct virtnet_info *vi = netdev_priv(dev);
+	struct virtio_device *vdev = vi->vdev;
+
+	if (data && !virtio_has_feature(vdev, VIRTIO_NET_F_CSUM))
+		return -ENOSYS;
+
+	return ethtool_op_set_tx_hw_csum(dev, data);
+}
+
+static struct ethtool_ops virtnet_ethtool_ops = {
+	.set_tx_csum = virtnet_set_tx_csum,
+	.set_sg = ethtool_op_set_sg,
+};
+
 static int virtnet_probe(struct virtio_device *vdev)
 {
 	int err;
@@ -427,6 +444,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = virtnet_netpoll;
 #endif
+	SET_ETHTOOL_OPS(dev, &virtnet_ethtool_ops);
 	SET_NETDEV_DEV(dev, &vdev->dev);
 
 	/* Do we support "hardware" checksums? */
-- 
cgit v1.2.3


From 97402b96f87c6e32f75f1bffdd91a5ee144b679d Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 18 Apr 2008 11:24:27 +0800
Subject: virtio net: Allow receiving SG packets

Finally this patch lets virtio_net receive GSO packets in addition
to sending them.  This can definitely be optimised for the non-GSO
case.  For comparison the Xen approach stores one page in each skb
and uses subsequent skb's pages to construct an SG skb instead of
preallocating the maximum amount of pages per skb.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (added feature bits)
---
 drivers/net/virtio_net.c | 44 +++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index ce37a7e9541..0886b8a2d92 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -55,6 +55,9 @@ struct virtnet_info
 	struct tasklet_struct tasklet;
 	bool free_in_tasklet;
 
+	/* I like... big packets and I cannot lie! */
+	bool big_packets;
+
 	/* Receive & send queues. */
 	struct sk_buff_head recv;
 	struct sk_buff_head send;
@@ -89,6 +92,7 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb,
 			unsigned len)
 {
 	struct virtio_net_hdr *hdr = skb_vnet_hdr(skb);
+	int err;
 
 	if (unlikely(len < sizeof(struct virtio_net_hdr) + ETH_HLEN)) {
 		pr_debug("%s: short packet %i\n", dev->name, len);
@@ -96,10 +100,14 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb,
 		goto drop;
 	}
 	len -= sizeof(struct virtio_net_hdr);
-	BUG_ON(len > MAX_PACKET_LEN);
-
-	skb_trim(skb, len);
 
+	err = pskb_trim(skb, len);
+	if (err) {
+		pr_debug("%s: pskb_trim failed %i %d\n", dev->name, len, err);
+		dev->stats.rx_dropped++;
+		goto drop;
+	}
+	skb->truesize += skb->data_len;
 	dev->stats.rx_bytes += skb->len;
 	dev->stats.rx_packets++;
 
@@ -161,7 +169,7 @@ static void try_fill_recv(struct virtnet_info *vi)
 {
 	struct sk_buff *skb;
 	struct scatterlist sg[2+MAX_SKB_FRAGS];
-	int num, err;
+	int num, err, i;
 
 	sg_init_table(sg, 2+MAX_SKB_FRAGS);
 	for (;;) {
@@ -171,6 +179,24 @@ static void try_fill_recv(struct virtnet_info *vi)
 
 		skb_put(skb, MAX_PACKET_LEN);
 		vnet_hdr_to_sg(sg, skb);
+
+		if (vi->big_packets) {
+			for (i = 0; i < MAX_SKB_FRAGS; i++) {
+				skb_frag_t *f = &skb_shinfo(skb)->frags[i];
+				f->page = alloc_page(GFP_ATOMIC);
+				if (!f->page)
+					break;
+
+				f->page_offset = 0;
+				f->size = PAGE_SIZE;
+
+				skb->data_len += PAGE_SIZE;
+				skb->len += PAGE_SIZE;
+
+				skb_shinfo(skb)->nr_frags++;
+			}
+		}
+
 		num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
 		skb_queue_head(&vi->recv, skb);
 
@@ -485,6 +511,12 @@ static int virtnet_probe(struct virtio_device *vdev)
 	 * the timer. */
 	vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY);
 
+	/* If we can receive ANY GSO packets, we must allocate large ones. */
+	if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4)
+	    || virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6)
+	    || virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN))
+		vi->big_packets = true;
+
 	/* We expect two virtqueues, receive then send. */
 	vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
 	if (IS_ERR(vi->rvq)) {
@@ -571,7 +603,9 @@ static unsigned int features[] = {
 	VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM,
 	VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
 	VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
-	VIRTIO_NET_F_HOST_ECN, VIRTIO_F_NOTIFY_ON_EMPTY,
+	VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6,
+	VIRTIO_NET_F_GUEST_ECN, /* We don't yet handle UFO input. */
+	VIRTIO_F_NOTIFY_ON_EMPTY,
 };
 
 static struct virtio_driver virtio_net = {
-- 
cgit v1.2.3


From fb6813f480806d62361719e84777c8e00d3e86a8 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 25 Jul 2008 12:06:01 -0500
Subject: virtio: Recycle unused recv buffer pages for large skbs in net driver

If we hack the virtio_net driver to always allocate full-sized (64k+)
skbuffs, the driver slows down (lguest numbers):

  Time to receive 1GB (small buffers): 10.85 seconds
  Time to receive 1GB (64k+ buffers): 24.75 seconds

Of course, large buffers use up more space in the ring, so we increase
that from 128 to 2048:

  Time to receive 1GB (64k+ buffers, 2k ring): 16.61 seconds

If we recycle pages rather than using alloc_page/free_page:

  Time to receive 1GB (64k+ buffers, 2k ring, recycle pages): 10.81 seconds

This demonstrates that with efficient allocation, we don't need to
have a separate "small buffer" queue.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/net/virtio_net.c | 36 +++++++++++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 0886b8a2d92..0196a0df902 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -61,6 +61,9 @@ struct virtnet_info
 	/* Receive & send queues. */
 	struct sk_buff_head recv;
 	struct sk_buff_head send;
+
+	/* Chain pages by the private ptr. */
+	struct page *pages;
 };
 
 static inline struct virtio_net_hdr *skb_vnet_hdr(struct sk_buff *skb)
@@ -73,6 +76,23 @@ static inline void vnet_hdr_to_sg(struct scatterlist *sg, struct sk_buff *skb)
 	sg_init_one(sg, skb_vnet_hdr(skb), sizeof(struct virtio_net_hdr));
 }
 
+static void give_a_page(struct virtnet_info *vi, struct page *page)
+{
+	page->private = (unsigned long)vi->pages;
+	vi->pages = page;
+}
+
+static struct page *get_a_page(struct virtnet_info *vi, gfp_t gfp_mask)
+{
+	struct page *p = vi->pages;
+
+	if (p)
+		vi->pages = (struct page *)p->private;
+	else
+		p = alloc_page(gfp_mask);
+	return p;
+}
+
 static void skb_xmit_done(struct virtqueue *svq)
 {
 	struct virtnet_info *vi = svq->vdev->priv;
@@ -101,6 +121,15 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb,
 	}
 	len -= sizeof(struct virtio_net_hdr);
 
+	if (len <= MAX_PACKET_LEN) {
+		unsigned int i;
+
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
+			give_a_page(dev->priv, skb_shinfo(skb)->frags[i].page);
+		skb->data_len = 0;
+		skb_shinfo(skb)->nr_frags = 0;
+	}
+
 	err = pskb_trim(skb, len);
 	if (err) {
 		pr_debug("%s: pskb_trim failed %i %d\n", dev->name, len, err);
@@ -183,7 +212,7 @@ static void try_fill_recv(struct virtnet_info *vi)
 		if (vi->big_packets) {
 			for (i = 0; i < MAX_SKB_FRAGS; i++) {
 				skb_frag_t *f = &skb_shinfo(skb)->frags[i];
-				f->page = alloc_page(GFP_ATOMIC);
+				f->page = get_a_page(vi, GFP_ATOMIC);
 				if (!f->page)
 					break;
 
@@ -506,6 +535,7 @@ static int virtnet_probe(struct virtio_device *vdev)
 	vi->dev = dev;
 	vi->vdev = vdev;
 	vdev->priv = vi;
+	vi->pages = NULL;
 
 	/* If they give us a callback when all buffers are done, we don't need
 	 * the timer. */
@@ -591,6 +621,10 @@ static void virtnet_remove(struct virtio_device *vdev)
 	vdev->config->del_vq(vi->svq);
 	vdev->config->del_vq(vi->rvq);
 	unregister_netdev(vi->dev);
+
+	while (vi->pages)
+		__free_pages(get_a_page(vi, GFP_KERNEL), 0);
+
 	free_netdev(vi->dev);
 }
 
-- 
cgit v1.2.3


From 674bfc23c585b34c42263d73fb51710d49762a23 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 25 Jul 2008 12:06:03 -0500
Subject: virtio: clarify that ABI is usable by any implementations

We want others to implement and use virtio, so it makes sense to BSD
license the non-__KERNEL__ parts of the headers to make this crystal
clear.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Ryan Harper <ryanh@us.ibm.com>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
---
 include/linux/virtio_9p.h      | 2 ++
 include/linux/virtio_balloon.h | 2 ++
 include/linux/virtio_blk.h     | 2 ++
 include/linux/virtio_config.h  | 3 +++
 include/linux/virtio_console.h | 2 ++
 include/linux/virtio_net.h     | 2 ++
 include/linux/virtio_pci.h     | 5 ++---
 include/linux/virtio_rng.h     | 2 ++
 8 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
index 8eff0b53910..b3c4a60ceeb 100644
--- a/include/linux/virtio_9p.h
+++ b/include/linux/virtio_9p.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_9P_H
 #define _LINUX_VIRTIO_9P_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio console */
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
index 979524ee75b..c30c7bfbf39 100644
--- a/include/linux/virtio_balloon.h
+++ b/include/linux/virtio_balloon.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_BALLOON_H
 #define _LINUX_VIRTIO_BALLOON_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_balloon */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index 5f79a5f9de7..6a66c7f30bc 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_BLK_H
 #define _LINUX_VIRTIO_BLK_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_block */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index f364bbf63c3..7eb4b34d13b 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -1,5 +1,8 @@
 #ifndef _LINUX_VIRTIO_CONFIG_H
 #define _LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers. */
+
 /* Virtio devices use a standardized configuration space to define their
  * features and pass configuration information, but each implementation can
  * store and access that space differently. */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index ed2d4ead7eb..19a0da0dba4 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_VIRTIO_CONSOLE_H
 #define _LINUX_VIRTIO_CONSOLE_H
 #include <linux/virtio_config.h>
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers. */
 
 /* The ID for virtio console */
 #define VIRTIO_ID_CONSOLE	3
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 38c0571820f..5e33761b9b8 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_NET_H
 #define _LINUX_VIRTIO_NET_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_net */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
index b3151659cf4..cdef3574293 100644
--- a/include/linux/virtio_pci.h
+++ b/include/linux/virtio_pci.h
@@ -9,9 +9,8 @@
  * Authors:
  *  Anthony Liguori  <aliguori@us.ibm.com>
  *
- * This work is licensed under the terms of the GNU GPL, version 2 or later.
- * See the COPYING file in the top-level directory.
- *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
  */
 
 #ifndef _LINUX_VIRTIO_PCI_H
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
index 331afb6c9f6..1a85dab8a94 100644
--- a/include/linux/virtio_rng.h
+++ b/include/linux/virtio_rng.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_RNG_H
 #define _LINUX_VIRTIO_RNG_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_rng */
-- 
cgit v1.2.3


From 44653eae1407f79dff6f52fcf594ae84cb165ec4 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 25 Jul 2008 12:06:04 -0500
Subject: virtio: don't always force a notification when ring is full

We force notification when the ring is full, even if the host has
indicated it doesn't want to know.  This seemed like a good idea at
the time: if we fill the transmit ring, we should tell the host
immediately.

Unfortunately this logic also applies to the receiving ring, which is
refilled constantly.  We should introduce real notification thesholds
to replace this logic.  Meanwhile, removing the logic altogether breaks
the heuristics which KVM uses, so we use a hack: only notify if there are
outgoing parts of the new buffer.

Here are the number of exits with lguest's crappy network implementation:
Before:
	network xmit 7859051 recv 236420
After:
	network xmit 7858610 recv 118136

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/virtio/virtio_ring.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 72bf8bc0901..21d9a62767a 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -87,8 +87,11 @@ static int vring_add_buf(struct virtqueue *_vq,
 	if (vq->num_free < out + in) {
 		pr_debug("Can't add buf len %i - avail = %i\n",
 			 out + in, vq->num_free);
-		/* We notify *even if* VRING_USED_F_NO_NOTIFY is set here. */
-		vq->notify(&vq->vq);
+		/* FIXME: for historical reasons, we force a notify here if
+		 * there are outgoing parts to the buffer.  Presumably the
+		 * host should service the ring ASAP. */
+		if (out)
+			vq->notify(&vq->vq);
 		END_USE(vq);
 		return -ENOSPC;
 	}
-- 
cgit v1.2.3


From e962fa660d391fc9b90988e6538c94c858c099f9 Mon Sep 17 00:00:00 2001
From: Mark McLoughlin <markmc@redhat.com>
Date: Fri, 13 Jun 2008 13:46:40 +0100
Subject: virtio: Use bus_type probe and remove methods

Hook up to the probe() and remove() methods in bus_type
rather than device_driver. The latter has been preferred
since 2.6.16.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/virtio/virtio.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 7084e7e146c..fc85cba6457 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -71,13 +71,6 @@ static int virtio_uevent(struct device *_dv, struct kobj_uevent_env *env)
 			      dev->id.device, dev->id.vendor);
 }
 
-static struct bus_type virtio_bus = {
-	.name  = "virtio",
-	.match = virtio_dev_match,
-	.dev_attrs = virtio_dev_attrs,
-	.uevent = virtio_uevent,
-};
-
 static void add_status(struct virtio_device *dev, unsigned status)
 {
 	dev->config->set_status(dev, dev->config->get_status(dev) | status);
@@ -147,13 +140,20 @@ static int virtio_dev_remove(struct device *_d)
 	return 0;
 }
 
+static struct bus_type virtio_bus = {
+	.name  = "virtio",
+	.match = virtio_dev_match,
+	.dev_attrs = virtio_dev_attrs,
+	.uevent = virtio_uevent,
+	.probe = virtio_dev_probe,
+	.remove = virtio_dev_remove,
+};
+
 int register_virtio_driver(struct virtio_driver *driver)
 {
 	/* Catch this early. */
 	BUG_ON(driver->feature_table_size && !driver->feature_table);
 	driver->driver.bus = &virtio_bus;
-	driver->driver.probe = virtio_dev_probe;
-	driver->driver.remove = virtio_dev_remove;
 	return driver_register(&driver->driver);
 }
 EXPORT_SYMBOL_GPL(register_virtio_driver);
-- 
cgit v1.2.3


From 066f4d82a67f621ddd547bfa4b9c94631d8457b0 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 29 May 2008 11:08:26 +0200
Subject: virtio_blk: check for hardsector size from host

Currently virtio_blk assumes a 512 byte hard sector size. This can cause
trouble / performance issues if the backing has a different block size
(like a file on an ext3 file system formatted with 4k block size or a dasd).

Lets add a feature flag that tells the guest to use a different hard sector
size than 512 byte.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/block/virtio_blk.c | 10 +++++++++-
 include/linux/virtio_blk.h |  3 +++
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index dd7ea203f94..42251095134 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -196,6 +196,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 	int err;
 	u64 cap;
 	u32 v;
+	u32 blk_size;
 
 	if (index_to_minor(index) >= 1 << MINORBITS)
 		return -ENOSPC;
@@ -290,6 +291,13 @@ static int virtblk_probe(struct virtio_device *vdev)
 	if (!err)
 		blk_queue_max_hw_segments(vblk->disk->queue, v);
 
+	/* Host can optionally specify the block size of the device */
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_BLK_SIZE,
+				offsetof(struct virtio_blk_config, blk_size),
+				&blk_size);
+	if (!err)
+		blk_queue_hardsect_size(vblk->disk->queue, blk_size);
+
 	add_disk(vblk->disk);
 	return 0;
 
@@ -330,7 +338,7 @@ static struct virtio_device_id id_table[] = {
 
 static unsigned int features[] = {
 	VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
-	VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO,
+	VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE,
 };
 
 static struct virtio_driver virtio_blk = {
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index 6a66c7f30bc..c1aef85243b 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -13,6 +13,7 @@
 #define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
 #define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
 #define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
+#define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
 
 struct virtio_blk_config
 {
@@ -28,6 +29,8 @@ struct virtio_blk_config
 		__u8 heads;
 		__u8 sectors;
 	} geometry;
+	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
+	__u32 blk_size;
 } __attribute__((packed));
 
 /* These two define direction. */
-- 
cgit v1.2.3


From 611e097d7707741a336a0677d9d69bec40f29f3d Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Fri, 20 Jun 2008 15:24:08 +0200
Subject: hvc_console: rework setup to replace irq functions with callbacks

This patch tries to change hvc_console to not use request_irq/free_irq if
the backend does not use irqs. This allows virtio_console to use hvc_console
without having a linker reference to request_irq/free_irq.

In addition, together with patch 2/3 it improves the performance for virtio
console input. (an earlier version of this patch was tested by Yajin on lguest)

The irq specific code is moved to hvc_irq.c and selected by the drivers that
use irqs (System p, System i, XEN).

I replaced "int irq" with the opaque "int data". The request_irq and
free_irq calls are replaced with notifier_add and notifier_del. I have also
changed the code a bit to call the notifier_add and notifier_del inside the
spinlock area as the callbacks are found via hp->ops.

Changes since last version:
o remove ifdef
o reintroduce "irq_requested" as "notified"
o cleanups, sparse..

I did not move the timer based polling into a separate polling scheme. I
played with several variants, but it seems we need to sleep/schedule in
a thread even for irq based consoles, as there are throttleing and buffer
size constraints.

I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access
the irq_requested element.

Feedback is appreciated. virtio_console is currently the only available console
for kvm on s390. I plan to push this change as soon as all affected parties
agree on it. I would love to get test results from System p, Xen etc.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/char/Kconfig       |  5 +++
 drivers/char/Makefile      |  1 +
 drivers/char/hvc_console.c | 81 +++++++++++-----------------------------------
 drivers/char/hvc_console.h | 35 +++++++++++++++++---
 drivers/char/hvc_irq.c     | 44 +++++++++++++++++++++++++
 drivers/char/hvc_iseries.c |  2 ++
 drivers/char/hvc_vio.c     |  2 ++
 drivers/char/hvc_xen.c     |  2 ++
 8 files changed, 105 insertions(+), 67 deletions(-)
 create mode 100644 drivers/char/hvc_irq.c

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 67b07576f8b..d825361a6ba 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -578,11 +578,14 @@ config HVC_DRIVER
 	  It will automatically be selected if one of the back-end console drivers
 	  is selected.
 
+config HVC_IRQ
+	bool
 
 config HVC_CONSOLE
 	bool "pSeries Hypervisor Virtual Console support"
 	depends on PPC_PSERIES
 	select HVC_DRIVER
+	select HVC_IRQ
 	help
 	  pSeries machines when partitioned support a hypervisor virtual
 	  console. This driver allows each pSeries partition to have a console
@@ -593,6 +596,7 @@ config HVC_ISERIES
 	depends on PPC_ISERIES
 	default y
 	select HVC_DRIVER
+	select HVC_IRQ
 	help
 	  iSeries machines support a hypervisor virtual console.
 
@@ -614,6 +618,7 @@ config HVC_XEN
 	bool "Xen Hypervisor Console support"
 	depends on XEN
 	select HVC_DRIVER
+	select HVC_IRQ
 	default y
 	help
 	  Xen virtual console device driver
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 4b6e736cfa0..eb02c350680 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
 obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
 obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
+obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
 obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
 obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 2f9759d625c..2f5b7fb6704 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/kbd_kern.h>
 #include <linux/kernel.h>
-#include <linux/kref.h>
 #include <linux/kthread.h>
 #include <linux/list.h>
 #include <linux/module.h>
@@ -75,23 +74,6 @@ static int hvc_init(void);
 static int sysrq_pressed;
 #endif
 
-struct hvc_struct {
-	spinlock_t lock;
-	int index;
-	struct tty_struct *tty;
-	unsigned int count;
-	int do_wakeup;
-	char *outbuf;
-	int outbuf_size;
-	int n_outbuf;
-	uint32_t vtermno;
-	struct hv_ops *ops;
-	int irq_requested;
-	int irq;
-	struct list_head next;
-	struct kref kref; /* ref count & hvc_struct lifetime */
-};
-
 /* dynamic list of hvc_struct instances */
 static LIST_HEAD(hvc_structs);
 
@@ -300,26 +282,12 @@ int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops)
 }
 
 /* Wake the sleeping khvcd */
-static void hvc_kick(void)
+void hvc_kick(void)
 {
 	hvc_kicked = 1;
 	wake_up_process(hvc_task);
 }
 
-static int hvc_poll(struct hvc_struct *hp);
-
-/*
- * NOTE: This API isn't used if the console adapter doesn't support interrupts.
- * In this case the console is poll driven.
- */
-static irqreturn_t hvc_handle_interrupt(int irq, void *dev_instance)
-{
-	/* if hvc_poll request a repoll, then kick the hvcd thread */
-	if (hvc_poll(dev_instance))
-		hvc_kick();
-	return IRQ_HANDLED;
-}
-
 static void hvc_unthrottle(struct tty_struct *tty)
 {
 	hvc_kick();
@@ -333,7 +301,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 {
 	struct hvc_struct *hp;
 	unsigned long flags;
-	int irq = 0;
 	int rc = 0;
 
 	/* Auto increments kref reference if found. */
@@ -352,18 +319,15 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
 
 	hp->tty = tty;
-	/* Save for request_irq outside of spin_lock. */
-	irq = hp->irq;
-	if (irq)
-		hp->irq_requested = 1;
+
+	if (hp->ops->notifier_add)
+		rc = hp->ops->notifier_add(hp, hp->data);
 
 	spin_unlock_irqrestore(&hp->lock, flags);
-	/* check error, fallback to non-irq */
-	if (irq)
-		rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED, "hvc_console", hp);
+
 
 	/*
-	 * If the request_irq() fails and we return an error.  The tty layer
+	 * If the notifier fails we return an error.  The tty layer
 	 * will call hvc_close() after a failed open but we don't want to clean
 	 * up there so we'll clean up here and clear out the previously set
 	 * tty fields and return the kref reference.
@@ -371,7 +335,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	if (rc) {
 		spin_lock_irqsave(&hp->lock, flags);
 		hp->tty = NULL;
-		hp->irq_requested = 0;
 		spin_unlock_irqrestore(&hp->lock, flags);
 		tty->driver_data = NULL;
 		kref_put(&hp->kref, destroy_hvc_struct);
@@ -386,7 +349,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 static void hvc_close(struct tty_struct *tty, struct file * filp)
 {
 	struct hvc_struct *hp;
-	int irq = 0;
 	unsigned long flags;
 
 	if (tty_hung_up_p(filp))
@@ -404,9 +366,8 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 	spin_lock_irqsave(&hp->lock, flags);
 
 	if (--hp->count == 0) {
-		if (hp->irq_requested)
-			irq = hp->irq;
-		hp->irq_requested = 0;
+		if (hp->ops->notifier_del)
+			hp->ops->notifier_del(hp, hp->data);
 
 		/* We are done with the tty pointer now. */
 		hp->tty = NULL;
@@ -418,10 +379,6 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		 * waking periodically to check chars_in_buffer().
 		 */
 		tty_wait_until_sent(tty, HVC_CLOSE_WAIT);
-
-		if (irq)
-			free_irq(irq, hp);
-
 	} else {
 		if (hp->count < 0)
 			printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
@@ -436,7 +393,6 @@ static void hvc_hangup(struct tty_struct *tty)
 {
 	struct hvc_struct *hp = tty->driver_data;
 	unsigned long flags;
-	int irq = 0;
 	int temp_open_count;
 
 	if (!hp)
@@ -458,13 +414,12 @@ static void hvc_hangup(struct tty_struct *tty)
 	hp->count = 0;
 	hp->n_outbuf = 0;
 	hp->tty = NULL;
-	if (hp->irq_requested)
-		/* Saved for use outside of spin_lock. */
-		irq = hp->irq;
-	hp->irq_requested = 0;
+
+	if (hp->ops->notifier_del)
+			hp->ops->notifier_del(hp, hp->data);
+
 	spin_unlock_irqrestore(&hp->lock, flags);
-	if (irq)
-		free_irq(irq, hp);
+
 	while(temp_open_count) {
 		--temp_open_count;
 		kref_put(&hp->kref, destroy_hvc_struct);
@@ -575,7 +530,7 @@ static u32 timeout = MIN_TIMEOUT;
 #define HVC_POLL_READ	0x00000001
 #define HVC_POLL_WRITE	0x00000002
 
-static int hvc_poll(struct hvc_struct *hp)
+int hvc_poll(struct hvc_struct *hp)
 {
 	struct tty_struct *tty;
 	int i, n, poll_mask = 0;
@@ -602,10 +557,10 @@ static int hvc_poll(struct hvc_struct *hp)
 	if (test_bit(TTY_THROTTLED, &tty->flags))
 		goto throttled;
 
-	/* If we aren't interrupt driven and aren't throttled, we always
+	/* If we aren't notifier driven and aren't throttled, we always
 	 * request a reschedule
 	 */
-	if (hp->irq == 0)
+	if (!hp->irq_requested)
 		poll_mask |= HVC_POLL_READ;
 
 	/* Read data if any */
@@ -733,7 +688,7 @@ static const struct tty_operations hvc_ops = {
 	.chars_in_buffer = hvc_chars_in_buffer,
 };
 
-struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int irq,
+struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data,
 					struct hv_ops *ops, int outbuf_size)
 {
 	struct hvc_struct *hp;
@@ -754,7 +709,7 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int irq,
 	memset(hp, 0x00, sizeof(*hp));
 
 	hp->vtermno = vtermno;
-	hp->irq = irq;
+	hp->data = data;
 	hp->ops = ops;
 	hp->outbuf_size = outbuf_size;
 	hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))];
diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h
index 42ffb17e15d..d9ce1091562 100644
--- a/drivers/char/hvc_console.h
+++ b/drivers/char/hvc_console.h
@@ -26,6 +26,7 @@
 
 #ifndef HVC_CONSOLE_H
 #define HVC_CONSOLE_H
+#include <linux/kref.h>
 
 /*
  * This is the max number of console adapters that can/will be found as
@@ -42,24 +43,50 @@
  */
 #define HVC_ALLOC_TTY_ADAPTERS	8
 
+struct hvc_struct {
+	spinlock_t lock;
+	int index;
+	struct tty_struct *tty;
+	unsigned int count;
+	int do_wakeup;
+	char *outbuf;
+	int outbuf_size;
+	int n_outbuf;
+	uint32_t vtermno;
+	struct hv_ops *ops;
+	int irq_requested;
+	int data;
+	struct list_head next;
+	struct kref kref; /* ref count & hvc_struct lifetime */
+};
 
 /* implemented by a low level driver */
 struct hv_ops {
 	int (*get_chars)(uint32_t vtermno, char *buf, int count);
 	int (*put_chars)(uint32_t vtermno, const char *buf, int count);
-};
 
-struct hvc_struct;
+	/* Callbacks for notification. Called in open and close */
+	int (*notifier_add)(struct hvc_struct *hp, int irq);
+	void (*notifier_del)(struct hvc_struct *hp, int irq);
+};
 
 /* Register a vterm and a slot index for use as a console (console_init) */
 extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops);
 
 /* register a vterm for hvc tty operation (module_init or hotplug add) */
-extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int irq,
+extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int data,
 				struct hv_ops *ops, int outbuf_size);
-/* remove a vterm from hvc tty operation (modele_exit or hotplug remove) */
+/* remove a vterm from hvc tty operation (module_exit or hotplug remove) */
 extern int __devexit hvc_remove(struct hvc_struct *hp);
 
+/* data available */
+int hvc_poll(struct hvc_struct *hp);
+void hvc_kick(void);
+
+/* default notifier for irq based notification */
+extern int notifier_add_irq(struct hvc_struct *hp, int data);
+extern void notifier_del_irq(struct hvc_struct *hp, int data);
+
 
 #if defined(CONFIG_XMON) && defined(CONFIG_SMP)
 #include <asm/xmon.h>
diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c
new file mode 100644
index 00000000000..73a59cdb894
--- /dev/null
+++ b/drivers/char/hvc_irq.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright IBM Corp. 2001,2008
+ *
+ * This file contains the IRQ specific code for hvc_console
+ *
+ */
+
+#include <linux/interrupt.h>
+
+#include "hvc_console.h"
+
+static irqreturn_t hvc_handle_interrupt(int irq, void *dev_instance)
+{
+	/* if hvc_poll request a repoll, then kick the hvcd thread */
+	if (hvc_poll(dev_instance))
+		hvc_kick();
+	return IRQ_HANDLED;
+}
+
+/*
+ * For IRQ based systems these callbacks can be used
+ */
+int notifier_add_irq(struct hvc_struct *hp, int irq)
+{
+	int rc;
+
+	if (!irq) {
+		hp->irq_requested = 0;
+		return 0;
+	}
+	rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED,
+			   "hvc_console", hp);
+	if (!rc)
+		hp->irq_requested = 1;
+	return rc;
+}
+
+void notifier_del_irq(struct hvc_struct *hp, int irq)
+{
+	if (!irq)
+		return;
+	free_irq(irq, hp);
+	hp->irq_requested = 0;
+}
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index a08f8f981c1..b71c610fe5a 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -200,6 +200,8 @@ done:
 static struct hv_ops hvc_get_put_ops = {
 	.get_chars = get_chars,
 	.put_chars = put_chars,
+	.notifier_add = notifier_add_irq,
+	.notifier_del = notifier_del_irq,
 };
 
 static int __devinit hvc_vio_probe(struct vio_dev *vdev,
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index 79711aa4b41..93f3840c168 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -80,6 +80,8 @@ static int filtered_get_chars(uint32_t vtermno, char *buf, int count)
 static struct hv_ops hvc_get_put_ops = {
 	.get_chars = filtered_get_chars,
 	.put_chars = hvc_put_chars,
+	.notifier_add = notifier_add_irq,
+	.notifier_del = notifier_del_irq,
 };
 
 static int __devinit hvc_vio_probe(struct vio_dev *vdev,
diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c
index db2ae421627..6b70aa66a58 100644
--- a/drivers/char/hvc_xen.c
+++ b/drivers/char/hvc_xen.c
@@ -100,6 +100,8 @@ static int read_console(uint32_t vtermno, char *buf, int len)
 static struct hv_ops hvc_ops = {
 	.get_chars = read_console,
 	.put_chars = write_console,
+	.notifier_add = notifier_add_irq,
+	.notifier_del = notifier_del_irq,
 };
 
 static int __init xen_init(void)
-- 
cgit v1.2.3


From 91fcad19d03ed67cb50fd0e1913a8b89cc3ed3ec Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Fri, 20 Jun 2008 15:24:15 +0200
Subject: virtio_console: use virtqueue notification for hvc_console

This patch exploits the new notifier callbacks of the hvc_console. We can
use the virtio callbacks instead of the polling code.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/char/virtio_console.c | 40 +++++++++++++++++++++++++++++++++-------
 1 file changed, 33 insertions(+), 7 deletions(-)

diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index dc17fe3a88b..d0f4eb6fdb7 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -46,6 +46,9 @@ static char *in, *inbuf;
 /* The operations for our console. */
 static struct hv_ops virtio_cons;
 
+/* The hvc device */
+static struct hvc_struct *hvc;
+
 /*D:310 The put_chars() callback is pretty straightforward.
  *
  * We turn the characters into a scatter-gather list, add it to the output
@@ -134,6 +137,27 @@ int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
 	return hvc_instantiate(0, 0, &virtio_cons);
 }
 
+/*
+ * we support only one console, the hvc struct is a global var
+ * There is no need to do anything
+ */
+static int notifier_add_vio(struct hvc_struct *hp, int data)
+{
+	hp->irq_requested = 1;
+	return 0;
+}
+
+static void notifier_del_vio(struct hvc_struct *hp, int data)
+{
+	hp->irq_requested = 0;
+}
+
+static void hvc_handle_input(struct virtqueue *vq)
+{
+	if (hvc_poll(hvc))
+		hvc_kick();
+}
+
 /*D:370 Once we're further in boot, we get probed like any other virtio device.
  * At this stage we set up the output virtqueue.
  *
@@ -144,7 +168,6 @@ int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
 static int __devinit virtcons_probe(struct virtio_device *dev)
 {
 	int err;
-	struct hvc_struct *hvc;
 
 	vdev = dev;
 
@@ -158,7 +181,7 @@ static int __devinit virtcons_probe(struct virtio_device *dev)
 	/* Find the input queue. */
 	/* FIXME: This is why we want to wean off hvc: we do nothing
 	 * when input comes in. */
-	in_vq = vdev->config->find_vq(vdev, 0, NULL);
+	in_vq = vdev->config->find_vq(vdev, 0, hvc_handle_input);
 	if (IS_ERR(in_vq)) {
 		err = PTR_ERR(in_vq);
 		goto free;
@@ -173,15 +196,18 @@ static int __devinit virtcons_probe(struct virtio_device *dev)
 	/* Start using the new console output. */
 	virtio_cons.get_chars = get_chars;
 	virtio_cons.put_chars = put_chars;
+	virtio_cons.notifier_add = notifier_add_vio;
+	virtio_cons.notifier_del = notifier_del_vio;
 
 	/* The first argument of hvc_alloc() is the virtual console number, so
-	 * we use zero.  The second argument is the interrupt number; we
-	 * currently leave this as zero: it would be better not to use the
-	 * hvc mechanism and fix this (FIXME!).
+	 * we use zero.  The second argument is the parameter for the
+	 * notification mechanism (like irq number). We currently leave this
+	 * as zero, virtqueues have implicit notifications.
 	 *
 	 * The third argument is a "struct hv_ops" containing the put_chars()
-	 * and get_chars() pointers.  The final argument is the output buffer
-	 * size: we can do any size, so we put PAGE_SIZE here. */
+	 * get_chars(), notifier_add() and notifier_del() pointers.
+	 * The final argument is the output buffer size: we can do any size,
+	 * so we put PAGE_SIZE here. */
 	hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE);
 	if (IS_ERR(hvc)) {
 		err = PTR_ERR(hvc);
-- 
cgit v1.2.3


From 7721c494a28e06543a3d6aa412957aa783a4a531 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Fri, 25 Jul 2008 12:06:06 -0500
Subject: virtio: console as a config option

I also added a small Kconfig change that allows the user to specify the
virtio console in menuconfig.

(Fixes to export symbols from Stephen Rothwell <sfr@canb.auug.org.au>)
(Fixes for CONFIG_VIRTIO_CONSOLE=y vs CONFIG_VIRTIO=m from Christian himself)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/char/Kconfig       | 6 +++++-
 drivers/char/hvc_console.c | 4 ++++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index d825361a6ba..6c070dc5f2d 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -624,8 +624,12 @@ config HVC_XEN
 	  Xen virtual console device driver
 
 config VIRTIO_CONSOLE
-	bool
+	tristate "Virtio console"
+	depends on VIRTIO
 	select HVC_DRIVER
+	help
+	  Virtio console for use with lguest and other hypervisors.
+
 
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 2f5b7fb6704..02aac104842 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -280,6 +280,7 @@ int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(hvc_instantiate);
 
 /* Wake the sleeping khvcd */
 void hvc_kick(void)
@@ -287,6 +288,7 @@ void hvc_kick(void)
 	hvc_kicked = 1;
 	wake_up_process(hvc_task);
 }
+EXPORT_SYMBOL_GPL(hvc_kick);
 
 static void hvc_unthrottle(struct tty_struct *tty)
 {
@@ -629,6 +631,7 @@ int hvc_poll(struct hvc_struct *hp)
 
 	return poll_mask;
 }
+EXPORT_SYMBOL_GPL(hvc_poll);
 
 /*
  * This kthread is either polling or interrupt driven.  This is determined by
@@ -739,6 +742,7 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data,
 
 	return hp;
 }
+EXPORT_SYMBOL_GPL(hvc_alloc);
 
 int __devexit hvc_remove(struct hvc_struct *hp)
 {
-- 
cgit v1.2.3


From faeba830b086bc9e58748869054e994cb09693cd Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Fri, 20 Jun 2008 15:24:18 +0200
Subject: s390: use virtio_console for KVM on s390

This patch enables virtio_console as the default console on kvm for
s390. We currently use the same notify hack as lguest for early
console output. I will try to address this for lguest and s390 later.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/s390/Kconfig             |  1 +
 arch/s390/kernel/setup.c      |  4 +++-
 drivers/s390/kvm/kvm_virtio.c | 20 ++++++++++++++++++++
 include/asm-s390/kvm_virtio.h | 10 ++++++++++
 4 files changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index eb530b4128b..2ed88122be9 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -565,6 +565,7 @@ bool "s390 guest support (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTIO
 	select VIRTIO_RING
+	select VIRTIO_CONSOLE
 	help
 	  Select this option if you want to run the kernel under s390 linux
 endmenu
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index b358e18273b..62122bad1e3 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -54,6 +54,7 @@
 #include <asm/sections.h>
 #include <asm/ebcdic.h>
 #include <asm/compat.h>
+#include <asm/kvm_virtio.h>
 
 long psw_kernel_bits	= (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
 			   PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
@@ -766,7 +767,8 @@ setup_arch(char **cmdline_p)
 		printk("We are running under VM (64 bit mode)\n");
 	else if (MACHINE_IS_KVM) {
 		printk("We are running under KVM (64 bit mode)\n");
-		add_preferred_console("ttyS", 1, NULL);
+		add_preferred_console("hvc", 0, NULL);
+		s390_virtio_console_init();
 	} else
 		printk("We are running native (64 bit mode)\n");
 #endif /* CONFIG_64BIT */
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 5ab34340919..d41f234bb2c 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -15,6 +15,7 @@
 #include <linux/err.h>
 #include <linux/virtio.h>
 #include <linux/virtio_config.h>
+#include <linux/virtio_console.h>
 #include <linux/interrupt.h>
 #include <linux/virtio_ring.h>
 #include <linux/pfn.h>
@@ -333,6 +334,25 @@ static int __init kvm_devices_init(void)
 	return 0;
 }
 
+/* code for early console output with virtio_console */
+static __init int early_put_chars(u32 vtermno, const char *buf, int count)
+{
+	char scratch[17];
+	unsigned int len = count;
+
+	if (len > sizeof(scratch) - 1)
+		len = sizeof(scratch) - 1;
+	scratch[len] = '\0';
+	memcpy(scratch, buf, len);
+	kvm_hypercall1(KVM_S390_VIRTIO_NOTIFY, __pa(scratch));
+	return len;
+}
+
+void s390_virtio_console_init(void)
+{
+	virtio_cons_early_init(early_put_chars);
+}
+
 /*
  * We do this after core stuff, but before the drivers.
  */
diff --git a/include/asm-s390/kvm_virtio.h b/include/asm-s390/kvm_virtio.h
index 5c871a990c2..146100224de 100644
--- a/include/asm-s390/kvm_virtio.h
+++ b/include/asm-s390/kvm_virtio.h
@@ -50,4 +50,14 @@ struct kvm_vqconfig {
 #define KVM_S390_VIRTIO_RESET		1
 #define KVM_S390_VIRTIO_SET_STATUS	2
 
+#ifdef __KERNEL__
+/* early virtio console setup */
+#ifdef CONFIG_VIRTIO_CONSOLE
+extern void s390_virtio_console_init(void);
+#else
+static inline void s390_virtio_console_init(void)
+{
+}
+#endif /* CONFIG_VIRTIO_CONSOLE */
+#endif /* __KERNEL__ */
 #endif
-- 
cgit v1.2.3


From dd7c7bc46211785a1aa7d70feb15830f62682b3c Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 25 Jul 2008 12:06:07 -0500
Subject: virtio: Formally reserve bits 28-31 to be 'transport' features.

We assign feature bits as required, but it makes sense to reserve some
for the particular transport, rather than the particular device.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/virtio/virtio.c       | 5 +++++
 include/linux/virtio_config.h | 6 ++++++
 2 files changed, 11 insertions(+)

diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index fc85cba6457..baf103361e3 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -113,6 +113,11 @@ static int virtio_dev_probe(struct device *_d)
 			set_bit(f, dev->features);
 	}
 
+	/* Transport features are always preserved to pass to set_features. */
+	for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++)
+		if (device_features & (1 << i))
+			set_bit(i, dev->features);
+
 	err = drv->probe(dev);
 	if (err)
 		add_status(dev, VIRTIO_CONFIG_S_FAILED);
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 7eb4b34d13b..5a30cfb7934 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -18,6 +18,12 @@
 /* We've given up on this device. */
 #define VIRTIO_CONFIG_S_FAILED		0x80
 
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START	28
+#define VIRTIO_TRANSPORT_F_END		32
+
 /* Do we get callbacks when the ring is completely used, even if we've
  * suppressed them? */
 #define VIRTIO_F_NOTIFY_ON_EMPTY	24
-- 
cgit v1.2.3


From c624896e488ba2bff5ae497782cfb265c8b00646 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 25 Jul 2008 12:06:07 -0500
Subject: virtio: Rename set_features to finalize_features

Rather than explicitly handing the features to the lower-level, we just
hand the virtio_device and have it set the features.  This make it clear
that it has the chance to manipulate the features of the device at this
point (and that all feature negotiation is already done).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/lguest/lguest_device.c | 11 ++++++-----
 drivers/s390/kvm/kvm_virtio.c  | 11 ++++++-----
 drivers/virtio/virtio.c        |  5 ++---
 drivers/virtio/virtio_pci.c    | 10 ++++++----
 include/linux/virtio_config.h  |  7 ++++---
 5 files changed, 24 insertions(+), 20 deletions(-)

diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 1a8de57289e..54fdc2aa480 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -98,16 +98,17 @@ static u32 lg_get_features(struct virtio_device *vdev)
 	return features;
 }
 
-static void lg_set_features(struct virtio_device *vdev, u32 features)
+static void lg_finalize_features(struct virtio_device *vdev)
 {
-	unsigned int i;
+	unsigned int i, bits;
 	struct lguest_device_desc *desc = to_lgdev(vdev)->desc;
 	/* Second half of bitmap is features we accept. */
 	u8 *out_features = lg_features(desc) + desc->feature_len;
 
 	memset(out_features, 0, desc->feature_len);
-	for (i = 0; i < min(desc->feature_len * 8, 32); i++) {
-		if (features & (1 << i))
+	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
+	for (i = 0; i < bits; i++) {
+		if (test_bit(i, vdev->features))
 			out_features[i / 8] |= (1 << (i % 8));
 	}
 }
@@ -297,7 +298,7 @@ static void lg_del_vq(struct virtqueue *vq)
 /* The ops structure which hooks everything together. */
 static struct virtio_config_ops lguest_config_ops = {
 	.get_features = lg_get_features,
-	.set_features = lg_set_features,
+	.finalize_features = lg_finalize_features,
 	.get = lg_get,
 	.set = lg_set,
 	.get_status = lg_get_status,
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index d41f234bb2c..5953510e7d5 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -88,16 +88,17 @@ static u32 kvm_get_features(struct virtio_device *vdev)
 	return features;
 }
 
-static void kvm_set_features(struct virtio_device *vdev, u32 features)
+static void kvm_finalize_features(struct virtio_device *vdev)
 {
-	unsigned int i;
+	unsigned int i, bits;
 	struct kvm_device_desc *desc = to_kvmdev(vdev)->desc;
 	/* Second half of bitmap is features we accept. */
 	u8 *out_features = kvm_vq_features(desc) + desc->feature_len;
 
 	memset(out_features, 0, desc->feature_len);
-	for (i = 0; i < min(desc->feature_len * 8, 32); i++) {
-		if (features & (1 << i))
+	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
+	for (i = 0; i < bits; i++) {
+		if (test_bit(i, vdev->features))
 			out_features[i / 8] |= (1 << (i % 8));
 	}
 }
@@ -223,7 +224,7 @@ static void kvm_del_vq(struct virtqueue *vq)
  */
 static struct virtio_config_ops kvm_vq_configspace_ops = {
 	.get_features = kvm_get_features,
-	.set_features = kvm_set_features,
+	.finalize_features = kvm_finalize_features,
 	.get = kvm_get,
 	.set = kvm_set,
 	.get_status = kvm_get_status,
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index baf103361e3..5b78fd0aff0 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -113,7 +113,7 @@ static int virtio_dev_probe(struct device *_d)
 			set_bit(f, dev->features);
 	}
 
-	/* Transport features are always preserved to pass to set_features. */
+	/* Transport features always preserved to pass to finalize_features. */
 	for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++)
 		if (device_features & (1 << i))
 			set_bit(i, dev->features);
@@ -122,8 +122,7 @@ static int virtio_dev_probe(struct device *_d)
 	if (err)
 		add_status(dev, VIRTIO_CONFIG_S_FAILED);
 	else {
-		/* They should never have set feature bits beyond 32 */
-		dev->config->set_features(dev, dev->features[0]);
+		dev->config->finalize_features(dev);
 		add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
 	}
 	return err;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index eae7236310e..9855975a72a 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -94,12 +94,14 @@ static u32 vp_get_features(struct virtio_device *vdev)
 	return ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES);
 }
 
-/* virtio config->set_features() implementation */
-static void vp_set_features(struct virtio_device *vdev, u32 features)
+/* virtio config->finalize_features() implementation */
+static void vp_finalize_features(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 
-	iowrite32(features, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES);
+	/* We only support 32 feature bits. */
+	BUILD_BUG_ON(ARRAY_SIZE(vdev->features) != 1);
+	iowrite32(vdev->features[0], vp_dev->ioaddr+VIRTIO_PCI_GUEST_FEATURES);
 }
 
 /* virtio config->get() implementation */
@@ -297,7 +299,7 @@ static struct virtio_config_ops virtio_pci_config_ops = {
 	.find_vq	= vp_find_vq,
 	.del_vq		= vp_del_vq,
 	.get_features	= vp_get_features,
-	.set_features	= vp_set_features,
+	.finalize_features = vp_finalize_features,
 };
 
 /* the PCI probing function */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 5a30cfb7934..bf8ec283b23 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -61,9 +61,10 @@
  * @get_features: get the array of feature bits for this device.
  *	vdev: the virtio_device
  *	Returns the first 32 feature bits (all we currently need).
- * @set_features: confirm what device features we'll be using.
+ * @finalize_features: confirm what device features we'll be using.
  *	vdev: the virtio_device
- *	feature: the first 32 feature bits
+ *	This gives the final feature bits for the device: it can change
+ *	the dev->feature bits if it wants.
  */
 struct virtio_config_ops
 {
@@ -79,7 +80,7 @@ struct virtio_config_ops
 				     void (*callback)(struct virtqueue *));
 	void (*del_vq)(struct virtqueue *vq);
 	u32 (*get_features)(struct virtio_device *vdev);
-	void (*set_features)(struct virtio_device *vdev, u32 features);
+	void (*finalize_features)(struct virtio_device *vdev);
 };
 
 /* If driver didn't advertise the feature, it will never appear. */
-- 
cgit v1.2.3


From e34f87256794b87e7f4a8f1812538be7b7b5214c Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 25 Jul 2008 12:06:13 -0500
Subject: virtio: Add transport feature handling stub for virtio_ring.

To prepare for virtio_ring transport feature bits, hook in a call in
all the users to manipulate them.  This currently just clears all the
bits, since it doesn't understand any features.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/lguest/lguest_device.c |  3 +++
 drivers/s390/kvm/kvm_virtio.c  |  3 +++
 drivers/virtio/virtio_pci.c    |  3 +++
 drivers/virtio/virtio_ring.c   | 16 ++++++++++++++++
 include/linux/virtio_ring.h    |  2 ++
 5 files changed, 27 insertions(+)

diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 54fdc2aa480..37344aaee22 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -105,6 +105,9 @@ static void lg_finalize_features(struct virtio_device *vdev)
 	/* Second half of bitmap is features we accept. */
 	u8 *out_features = lg_features(desc) + desc->feature_len;
 
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
 	memset(out_features, 0, desc->feature_len);
 	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
 	for (i = 0; i < bits; i++) {
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 5953510e7d5..79954bd6bfa 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -95,6 +95,9 @@ static void kvm_finalize_features(struct virtio_device *vdev)
 	/* Second half of bitmap is features we accept. */
 	u8 *out_features = kvm_vq_features(desc) + desc->feature_len;
 
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
 	memset(out_features, 0, desc->feature_len);
 	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
 	for (i = 0; i < bits; i++) {
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 9855975a72a..c7dc37c7cce 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -99,6 +99,9 @@ static void vp_finalize_features(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
 	/* We only support 32 feature bits. */
 	BUILD_BUG_ON(ARRAY_SIZE(vdev->features) != 1);
 	iowrite32(vdev->features[0], vp_dev->ioaddr+VIRTIO_PCI_GUEST_FEATURES);
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 21d9a62767a..6eb5303fed1 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -18,6 +18,7 @@
  */
 #include <linux/virtio.h>
 #include <linux/virtio_ring.h>
+#include <linux/virtio_config.h>
 #include <linux/device.h>
 
 #ifdef DEBUG
@@ -323,4 +324,19 @@ void vring_del_virtqueue(struct virtqueue *vq)
 }
 EXPORT_SYMBOL_GPL(vring_del_virtqueue);
 
+/* Manipulates transport-specific feature bits. */
+void vring_transport_features(struct virtio_device *vdev)
+{
+	unsigned int i;
+
+	for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++) {
+		switch (i) {
+		default:
+			/* We don't understand this bit. */
+			clear_bit(i, vdev->features);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(vring_transport_features);
+
 MODULE_LICENSE("GPL");
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index abe481ed990..c4a598fb382 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -120,6 +120,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      void (*notify)(struct virtqueue *vq),
 				      void (*callback)(struct virtqueue *vq));
 void vring_del_virtqueue(struct virtqueue *vq);
+/* Filter out transport-specific feature bits. */
+void vring_transport_features(struct virtio_device *vdev);
 
 irqreturn_t vring_interrupt(int irq, void *_vq);
 #endif /* __KERNEL__ */
-- 
cgit v1.2.3


From ed9559d38a87a44e3bda87d73a50aab92471d7dc Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 25 Jul 2008 12:11:09 +1000
Subject: Label kthread_create() with printf attribute tag.

Obvious misc patch been in my queue (& linux-next) for over a cycle.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/kthread.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 00dd957e245..aabc8a13ba7 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -6,7 +6,8 @@
 
 struct task_struct *kthread_create(int (*threadfn)(void *data),
 				   void *data,
-				   const char namefmt[], ...);
+				   const char namefmt[], ...)
+	__attribute__((format(printf, 3, 4)));
 
 /**
  * kthread_run - create and wake a thread.
-- 
cgit v1.2.3


From f7a6117ee59c0001d58e830a82d7e205ed602bdd Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Thu, 24 Jul 2008 20:36:59 -0700
Subject: RDMA/ucma: BKL is not needed for ucma_open()

Remove explicit lock_kernel() calls and document why the code is safe.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/core/ucma.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index 195f97302fe..b41dd26bbfa 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -38,7 +38,6 @@
 #include <linux/in.h>
 #include <linux/in6.h>
 #include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
 
 #include <rdma/rdma_user_cm.h>
 #include <rdma/ib_marshall.h>
@@ -1149,6 +1148,14 @@ static unsigned int ucma_poll(struct file *filp, struct poll_table_struct *wait)
 	return mask;
 }
 
+/*
+ * ucma_open() does not need the BKL:
+ *
+ *  - no global state is referred to;
+ *  - there is no ioctl method to race against;
+ *  - no further module initialization is required for open to work
+ *    after the device is registered.
+ */
 static int ucma_open(struct inode *inode, struct file *filp)
 {
 	struct ucma_file *file;
@@ -1157,7 +1164,6 @@ static int ucma_open(struct inode *inode, struct file *filp)
 	if (!file)
 		return -ENOMEM;
 
-	lock_kernel();
 	INIT_LIST_HEAD(&file->event_list);
 	INIT_LIST_HEAD(&file->ctx_list);
 	init_waitqueue_head(&file->poll_wait);
@@ -1165,7 +1171,6 @@ static int ucma_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = file;
 	file->filp = filp;
-	unlock_kernel();
 	return 0;
 }
 
-- 
cgit v1.2.3


From 5ba18b186c979283a2bf75a28b7ea325184b0c08 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Thu, 24 Jul 2008 20:36:59 -0700
Subject: RDMA/ucm: BKL is not needed for ib_ucm_open()

Remove explicit cycle_kernel_lock() call and document why the code is safe.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/core/ucm.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 9494005d1c9..e603736682b 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -43,7 +43,6 @@
 #include <linux/cdev.h>
 #include <linux/idr.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 
@@ -1154,11 +1153,18 @@ static unsigned int ib_ucm_poll(struct file *filp,
 	return mask;
 }
 
+/*
+ * ib_ucm_open() does not need the BKL:
+ *
+ *  - no global state is referred to;
+ *  - there is no ioctl method to race against;
+ *  - no further module initialization is required for open to work
+ *    after the device is registered.
+ */
 static int ib_ucm_open(struct inode *inode, struct file *filp)
 {
 	struct ib_ucm_file *file;
 
-	cycle_kernel_lock();
 	file = kmalloc(sizeof(*file), GFP_KERNEL);
 	if (!file)
 		return -ENOMEM;
-- 
cgit v1.2.3


From 99c3a5a9e388e0ac166c617aaf02150e778d2779 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Thu, 24 Jul 2008 20:37:25 -0700
Subject: IPoIB/cm: Connected mode is no longer EXPERIMENTAL

Connected mode is now tested and used by lots of people.  No need to
hide it under CONFIG_EXPERIMENTAL.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/ulp/ipoib/Kconfig | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
index 691525cf394..ccc7180818a 100644
--- a/drivers/infiniband/ulp/ipoib/Kconfig
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -11,16 +11,17 @@ config INFINIBAND_IPOIB
 
 config INFINIBAND_IPOIB_CM
 	bool "IP-over-InfiniBand Connected Mode support"
-	depends on INFINIBAND_IPOIB && EXPERIMENTAL
+	depends on INFINIBAND_IPOIB
 	default n
 	---help---
-	  This option enables experimental support for IPoIB connected mode.
-	  After enabling this option, you need to switch to connected mode through
-	  /sys/class/net/ibXXX/mode to actually create connections, and then increase
-	  the interface MTU with e.g. ifconfig ib0 mtu 65520.
+	  This option enables support for IPoIB connected mode.  After
+	  enabling this option, you need to switch to connected mode
+	  through /sys/class/net/ibXXX/mode to actually create
+	  connections, and then increase the interface MTU with
+	  e.g. ifconfig ib0 mtu 65520.
 
-	  WARNING: Enabling connected mode will trigger some
-	  packet drops for multicast and UD mode traffic from this interface,
+	  WARNING: Enabling connected mode will trigger some packet
+	  drops for multicast and UD mode traffic from this interface,
 	  unless you limit mtu for these destinations to 2044.
 
 config INFINIBAND_IPOIB_DEBUG
-- 
cgit v1.2.3


From 9905922446f6dc02fd4650c8f59114d6bdb5b777 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Thu, 24 Jul 2008 20:37:25 -0700
Subject: IPoIB: Correct help text for INFINIBAND_IPOIB_DEBUG

The help text for INFINIBAND_IPOIB_DEBUG refers to "ipoib_debugfs,"
which no longer exists.  Correct this to talk about the files under
debugfs that are really created.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/ulp/ipoib/Kconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
index ccc7180818a..9d9a9dc51f1 100644
--- a/drivers/infiniband/ulp/ipoib/Kconfig
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -34,9 +34,10 @@ config INFINIBAND_IPOIB_DEBUG
 	  debug_level and mcast_debug_level module parameters (which
 	  can also be set after the driver is loaded through sysfs).
 
-	  This option also creates an "ipoib_debugfs," which can be
-	  mounted to expose debugging information about IB multicast
-	  groups used by the IPoIB driver.
+	  This option also creates a directory tree under ipoib/ in
+	  debugfs, which contains files that expose debugging
+	  information about IB multicast groups used by the IPoIB
+	  driver.
 
 config INFINIBAND_IPOIB_DEBUG_DATA
 	bool "IP-over-InfiniBand data path debugging"
-- 
cgit v1.2.3


From 6492cdf3a24fd620660c399745b5e169a0ed27d6 Mon Sep 17 00:00:00 2001
From: Faisal Latif <flatif@neteffect.com>
Date: Thu, 24 Jul 2008 20:50:45 -0700
Subject: RDMA/nes: CM connection setup/teardown rework

Major rework of CM connection setup/teardown.  We had a number of issues
with MPI applications not starting/terminating properly over time.
With these changes we were able to run longer on larger clusters.

* Remove memory allocation from nes_connect() and nes_cm_connect().
* Fix mini_cm_dec_refcnt_listen() when destroying listener.
* Remove unnecessary code from schedule_nes_timer() and nes_cm_timer_tick().
* Functionalize mini_cm_recv_pkt() and process_packet().
* Clean up cm_node->ref_count usage.
* Reuse skbs if available.

Signed-off-by: Faisal Latif <flatif@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes.c       |    4 +-
 drivers/infiniband/hw/nes/nes_cm.c    | 2034 ++++++++++++++++++---------------
 drivers/infiniband/hw/nes/nes_cm.h    |   23 +-
 drivers/infiniband/hw/nes/nes_hw.c    |    9 -
 drivers/infiniband/hw/nes/nes_verbs.c |   15 -
 5 files changed, 1156 insertions(+), 929 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index d2884e77809..b0cab64e5e3 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -276,6 +276,7 @@ static void nes_cqp_rem_ref_callback(struct nes_device *nesdev, struct nes_cqp_r
 	}
 	nes_free_resource(nesadapter, nesadapter->allocated_qps, nesqp->hwqp.qp_id);
 
+	nesadapter->qp_table[nesqp->hwqp.qp_id-NES_FIRST_QPN] = NULL;
 	kfree(nesqp->allocated_buffer);
 
 }
@@ -289,7 +290,6 @@ void nes_rem_ref(struct ib_qp *ibqp)
 	struct nes_qp *nesqp;
 	struct nes_vnic *nesvnic = to_nesvnic(ibqp->device);
 	struct nes_device *nesdev = nesvnic->nesdev;
-	struct nes_adapter *nesadapter = nesdev->nesadapter;
 	struct nes_hw_cqp_wqe *cqp_wqe;
 	struct nes_cqp_request *cqp_request;
 	u32 opcode;
@@ -303,8 +303,6 @@ void nes_rem_ref(struct ib_qp *ibqp)
 	}
 
 	if (atomic_dec_and_test(&nesqp->refcount)) {
-		nesadapter->qp_table[nesqp->hwqp.qp_id-NES_FIRST_QPN] = NULL;
-
 		/* Destroy the QP */
 		cqp_request = nes_get_cqp_request(nesdev);
 		if (cqp_request == NULL) {
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 6aa531d5276..9f0b964b2c9 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -74,36 +74,59 @@ atomic_t cm_nodes_destroyed;
 atomic_t cm_accel_dropped_pkts;
 atomic_t cm_resets_recvd;
 
-static inline int mini_cm_accelerated(struct nes_cm_core *, struct nes_cm_node *);
+static inline int mini_cm_accelerated(struct nes_cm_core *,
+	struct nes_cm_node *);
 static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *,
-		struct nes_vnic *, struct nes_cm_info *);
-static int add_ref_cm_node(struct nes_cm_node *);
-static int rem_ref_cm_node(struct nes_cm_core *, struct nes_cm_node *);
+	struct nes_vnic *, struct nes_cm_info *);
 static int mini_cm_del_listen(struct nes_cm_core *, struct nes_cm_listener *);
-static struct sk_buff *form_cm_frame(struct sk_buff *, struct nes_cm_node *,
-				     void *, u32, void *, u32, u8);
-static struct sk_buff *get_free_pkt(struct nes_cm_node *cm_node);
-
 static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *,
-					   struct nes_vnic *,
-					   struct ietf_mpa_frame *,
-					   struct nes_cm_info *);
+	struct nes_vnic *, u16, void *, struct nes_cm_info *);
+static int mini_cm_close(struct nes_cm_core *, struct nes_cm_node *);
 static int mini_cm_accept(struct nes_cm_core *, struct ietf_mpa_frame *,
-			  struct nes_cm_node *);
+	struct nes_cm_node *);
 static int mini_cm_reject(struct nes_cm_core *, struct ietf_mpa_frame *,
-			  struct nes_cm_node *);
-static int mini_cm_close(struct nes_cm_core *, struct nes_cm_node *);
-static int mini_cm_recv_pkt(struct nes_cm_core *, struct nes_vnic *,
-			    struct sk_buff *);
+	struct nes_cm_node *);
+static void mini_cm_recv_pkt(struct nes_cm_core *, struct nes_vnic *,
+	struct sk_buff *);
 static int mini_cm_dealloc_core(struct nes_cm_core *);
 static int mini_cm_get(struct nes_cm_core *);
 static int mini_cm_set(struct nes_cm_core *, u32, u32);
+
+static struct sk_buff *form_cm_frame(struct sk_buff *, struct nes_cm_node *,
+	void *, u32, void *, u32, u8);
+static struct sk_buff *get_free_pkt(struct nes_cm_node *cm_node);
+static int add_ref_cm_node(struct nes_cm_node *);
+static int rem_ref_cm_node(struct nes_cm_core *, struct nes_cm_node *);
+
 static int nes_cm_disconn_true(struct nes_qp *);
 static int nes_cm_post_event(struct nes_cm_event *event);
 static int nes_disconnect(struct nes_qp *nesqp, int abrupt);
 static void nes_disconnect_worker(struct work_struct *work);
-static int send_ack(struct nes_cm_node *cm_node);
+
+static int send_mpa_request(struct nes_cm_node *, struct sk_buff *);
+static int send_syn(struct nes_cm_node *, u32, struct sk_buff *);
+static int send_reset(struct nes_cm_node *, struct sk_buff *);
+static int send_ack(struct nes_cm_node *cm_node, struct sk_buff *skb);
 static int send_fin(struct nes_cm_node *cm_node, struct sk_buff *skb);
+static void process_packet(struct nes_cm_node *, struct sk_buff *,
+	struct nes_cm_core *);
+
+static void active_open_err(struct nes_cm_node *, struct sk_buff *, int);
+static void passive_open_err(struct nes_cm_node *, struct sk_buff *, int);
+static void cleanup_retrans_entry(struct nes_cm_node *);
+static void handle_rcv_mpa(struct nes_cm_node *, struct sk_buff *,
+	enum nes_cm_event_type);
+static void free_retrans_entry(struct nes_cm_node *cm_node);
+static int handle_tcp_options(struct nes_cm_node *cm_node, struct tcphdr *tcph,
+	struct sk_buff *skb, int optionsize, int passive);
+
+/* CM event handler functions */
+static void cm_event_connected(struct nes_cm_event *);
+static void cm_event_connect_error(struct nes_cm_event *);
+static void cm_event_reset(struct nes_cm_event *);
+static void cm_event_mpa_req(struct nes_cm_event *);
+
+static void print_core(struct nes_cm_core *core);
 
 /* External CM API Interface */
 /* instance of function pointers for client API */
@@ -158,11 +181,11 @@ static struct nes_cm_event *create_event(struct nes_cm_node *cm_node,
 	event->cm_info.loc_port = cm_node->loc_port;
 	event->cm_info.cm_id = cm_node->cm_id;
 
-	nes_debug(NES_DBG_CM, "Created event=%p, type=%u, dst_addr=%08x[%x],"
-			" src_addr=%08x[%x]\n",
-			event, type,
-			event->cm_info.loc_addr, event->cm_info.loc_port,
-			event->cm_info.rem_addr, event->cm_info.rem_port);
+	nes_debug(NES_DBG_CM, "cm_node=%p Created event=%p, type=%u, "
+		"dst_addr=%08x[%x], src_addr=%08x[%x]\n",
+		cm_node, event, type, event->cm_info.loc_addr,
+		event->cm_info.loc_port, event->cm_info.rem_addr,
+		event->cm_info.rem_port);
 
 	nes_cm_post_event(event);
 	return event;
@@ -172,14 +195,11 @@ static struct nes_cm_event *create_event(struct nes_cm_node *cm_node,
 /**
  * send_mpa_request
  */
-static int send_mpa_request(struct nes_cm_node *cm_node)
+static int send_mpa_request(struct nes_cm_node *cm_node, struct sk_buff *skb)
 {
-	struct sk_buff *skb;
 	int ret;
-
-	skb = get_free_pkt(cm_node);
 	if (!skb) {
-		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
+		nes_debug(NES_DBG_CM, "skb set to NULL\n");
 		return -1;
 	}
 
@@ -188,9 +208,8 @@ static int send_mpa_request(struct nes_cm_node *cm_node)
 			cm_node->mpa_frame_size, SET_ACK);
 
 	ret = schedule_nes_timer(cm_node, skb, NES_TIMER_TYPE_SEND, 1, 0);
-	if (ret < 0) {
+	if (ret < 0)
 		return ret;
-	}
 
 	return 0;
 }
@@ -228,47 +247,13 @@ static int parse_mpa(struct nes_cm_node *cm_node, u8 *buffer, u32 len)
 }
 
 
-/**
- * handle_exception_pkt - process an exception packet.
- * We have been in a TSA state, and we have now received SW
- * TCP/IP traffic should be a FIN request or IP pkt with options
- */
-static int handle_exception_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb)
-{
-	int ret = 0;
-	struct tcphdr *tcph = tcp_hdr(skb);
-
-	/* first check to see if this a FIN pkt */
-	if (tcph->fin) {
-		/* we need to ACK the FIN request */
-		send_ack(cm_node);
-
-		/* check which side we are (client/server) and set next state accordingly */
-		if (cm_node->tcp_cntxt.client)
-			cm_node->state = NES_CM_STATE_CLOSING;
-		else {
-			/* we are the server side */
-			cm_node->state = NES_CM_STATE_CLOSE_WAIT;
-			/* since this is a self contained CM we don't wait for */
-			/* an APP to close us, just send final FIN immediately */
-			ret = send_fin(cm_node, NULL);
-			cm_node->state = NES_CM_STATE_LAST_ACK;
-		}
-	} else {
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-
 /**
  * form_cm_frame - get a free packet and build empty frame Use
  * node info to build.
  */
-static struct sk_buff *form_cm_frame(struct sk_buff *skb, struct nes_cm_node *cm_node,
-				     void *options, u32 optionsize, void *data,
-				     u32 datasize, u8 flags)
+static struct sk_buff *form_cm_frame(struct sk_buff *skb,
+	struct nes_cm_node *cm_node, void *options, u32 optionsize,
+	void *data, u32 datasize, u8 flags)
 {
 	struct tcphdr *tcph;
 	struct iphdr *iph;
@@ -332,10 +317,12 @@ static struct sk_buff *form_cm_frame(struct sk_buff *skb, struct nes_cm_node *cm
 		cm_node->tcp_cntxt.loc_seq_num++;
 		tcph->syn = 1;
 	} else
-		cm_node->tcp_cntxt.loc_seq_num += datasize;	/* data (no headers) */
+		cm_node->tcp_cntxt.loc_seq_num += datasize;
 
-	if (flags & SET_FIN)
+	if (flags & SET_FIN) {
+		cm_node->tcp_cntxt.loc_seq_num++;
 		tcph->fin = 1;
+	}
 
 	if (flags & SET_RST)
 		tcph->rst = 1;
@@ -389,7 +376,7 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
 		int close_when_complete)
 {
 	unsigned long  flags;
-	struct nes_cm_core *cm_core;
+	struct nes_cm_core *cm_core = cm_node->cm_core;
 	struct nes_timer_entry *new_send;
 	int ret = 0;
 	u32 was_timer_set;
@@ -411,7 +398,7 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	new_send->close_when_complete = close_when_complete;
 
 	if (type == NES_TIMER_TYPE_CLOSE) {
-		new_send->timetosend += (HZ/2);	/* TODO: decide on the correct value here */
+		new_send->timetosend += (HZ/10);
 		spin_lock_irqsave(&cm_node->recv_list_lock, flags);
 		list_add_tail(&new_send->list, &cm_node->recv_list);
 		spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
@@ -420,36 +407,28 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	if (type == NES_TIMER_TYPE_SEND) {
 		new_send->seq_num = ntohl(tcp_hdr(skb)->seq);
 		atomic_inc(&new_send->skb->users);
+		spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+		cm_node->send_entry = new_send;
+		add_ref_cm_node(cm_node);
+		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
+		new_send->timetosend = jiffies + NES_RETRY_TIMEOUT;
 
 		ret = nes_nic_cm_xmit(new_send->skb, cm_node->netdev);
 		if (ret != NETDEV_TX_OK) {
-			nes_debug(NES_DBG_CM, "Error sending packet %p (jiffies = %lu)\n",
-					new_send, jiffies);
+			nes_debug(NES_DBG_CM, "Error sending packet %p "
+				"(jiffies = %lu)\n", new_send, jiffies);
 			atomic_dec(&new_send->skb->users);
 			new_send->timetosend = jiffies;
 		} else {
 			cm_packets_sent++;
 			if (!send_retrans) {
+				cleanup_retrans_entry(cm_node);
 				if (close_when_complete)
-					rem_ref_cm_node(cm_node->cm_core, cm_node);
-				dev_kfree_skb_any(new_send->skb);
-				kfree(new_send);
+					rem_ref_cm_node(cm_core, cm_node);
 				return ret;
 			}
-			new_send->timetosend = jiffies + NES_RETRY_TIMEOUT;
 		}
-		spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-		list_add_tail(&new_send->list, &cm_node->retrans_list);
-		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-	}
-	if (type == NES_TIMER_TYPE_RECV) {
-		new_send->seq_num = ntohl(tcp_hdr(skb)->seq);
-		new_send->timetosend = jiffies;
-		spin_lock_irqsave(&cm_node->recv_list_lock, flags);
-		list_add_tail(&new_send->list, &cm_node->recv_list);
-		spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
 	}
-	cm_core = cm_node->cm_core;
 
 	was_timer_set = timer_pending(&cm_core->tcp_timer);
 
@@ -476,23 +455,27 @@ static void nes_cm_timer_tick(unsigned long pass)
 	struct list_head *list_node, *list_node_temp;
 	struct nes_cm_core *cm_core = g_cm_core;
 	struct nes_qp *nesqp;
-	struct sk_buff *skb;
 	u32 settimer = 0;
 	int ret = NETDEV_TX_OK;
-	int    node_done;
+	enum nes_cm_node_state last_state;
 
 	spin_lock_irqsave(&cm_core->ht_lock, flags);
 
-	list_for_each_safe(list_node, list_core_temp, &cm_core->connected_nodes) {
+	list_for_each_safe(list_node, list_core_temp,
+		&cm_core->connected_nodes) {
 		cm_node = container_of(list_node, struct nes_cm_node, list);
 		add_ref_cm_node(cm_node);
 		spin_unlock_irqrestore(&cm_core->ht_lock, flags);
 		spin_lock_irqsave(&cm_node->recv_list_lock, flags);
-		list_for_each_safe(list_core, list_node_temp, &cm_node->recv_list) {
-			recv_entry = container_of(list_core, struct nes_timer_entry, list);
-			if ((time_after(recv_entry->timetosend, jiffies)) &&
-					(recv_entry->type == NES_TIMER_TYPE_CLOSE)) {
-				if (nexttimeout > recv_entry->timetosend || !settimer) {
+		list_for_each_safe(list_core, list_node_temp,
+			&cm_node->recv_list) {
+			recv_entry = container_of(list_core,
+				struct nes_timer_entry, list);
+			if (!recv_entry)
+				break;
+			if (time_after(recv_entry->timetosend, jiffies)) {
+				if (nexttimeout > recv_entry->timetosend ||
+					!settimer) {
 					nexttimeout = recv_entry->timetosend;
 					settimer = 1;
 				}
@@ -501,157 +484,143 @@ static void nes_cm_timer_tick(unsigned long pass)
 			list_del(&recv_entry->list);
 			cm_id = cm_node->cm_id;
 			spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
-			if (recv_entry->type == NES_TIMER_TYPE_CLOSE) {
-				nesqp = (struct nes_qp *)recv_entry->skb;
-				spin_lock_irqsave(&nesqp->lock, qplockflags);
-				if (nesqp->cm_id) {
-					nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, refcount = %d: "
-							"****** HIT A NES_TIMER_TYPE_CLOSE"
-							" with something to do!!! ******\n",
-							nesqp->hwqp.qp_id, cm_id,
-							atomic_read(&nesqp->refcount));
-					nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
-					nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
-					nesqp->ibqp_state = IB_QPS_ERR;
-					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_cm_disconn(nesqp);
-				} else {
-					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, refcount = %d:"
-							" ****** HIT A NES_TIMER_TYPE_CLOSE"
-							" with nothing to do!!! ******\n",
-							nesqp->hwqp.qp_id, cm_id,
-							atomic_read(&nesqp->refcount));
-					nes_rem_ref(&nesqp->ibqp);
-				}
-				if (cm_id)
-					cm_id->rem_ref(cm_id);
+			nesqp = (struct nes_qp *)recv_entry->skb;
+			spin_lock_irqsave(&nesqp->lock, qplockflags);
+			if (nesqp->cm_id) {
+				nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, "
+					"refcount = %d: HIT A "
+					"NES_TIMER_TYPE_CLOSE with something "
+					"to do!!!\n", nesqp->hwqp.qp_id, cm_id,
+					atomic_read(&nesqp->refcount));
+				nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
+				nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
+				nesqp->ibqp_state = IB_QPS_ERR;
+				spin_unlock_irqrestore(&nesqp->lock,
+					qplockflags);
+				nes_cm_disconn(nesqp);
+			} else {
+				spin_unlock_irqrestore(&nesqp->lock,
+					qplockflags);
+				nes_debug(NES_DBG_CM, "QP%u: cm_id = %p, "
+					"refcount = %d: HIT A "
+					"NES_TIMER_TYPE_CLOSE with nothing "
+					"to do!!!\n", nesqp->hwqp.qp_id, cm_id,
+					atomic_read(&nesqp->refcount));
 			}
+			if (cm_id)
+				cm_id->rem_ref(cm_id);
+
 			kfree(recv_entry);
 			spin_lock_irqsave(&cm_node->recv_list_lock, flags);
 		}
 		spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
 
 		spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-		node_done = 0;
-		list_for_each_safe(list_core, list_node_temp, &cm_node->retrans_list) {
-			if (node_done) {
-				break;
-			}
-			send_entry = container_of(list_core, struct nes_timer_entry, list);
+		do {
+			send_entry = cm_node->send_entry;
+			if (!send_entry)
+				continue;
 			if (time_after(send_entry->timetosend, jiffies)) {
 				if (cm_node->state != NES_CM_STATE_TSA) {
-					if ((nexttimeout > send_entry->timetosend) || !settimer) {
-						nexttimeout = send_entry->timetosend;
+					if ((nexttimeout >
+						send_entry->timetosend) ||
+						!settimer) {
+						nexttimeout =
+							send_entry->timetosend;
 						settimer = 1;
+						continue;
 					}
-					node_done = 1;
-					continue;
 				} else {
-					list_del(&send_entry->list);
-					skb = send_entry->skb;
-					spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-					dev_kfree_skb_any(skb);
-					kfree(send_entry);
-					spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+					free_retrans_entry(cm_node);
 					continue;
 				}
 			}
-			if (send_entry->type == NES_TIMER_NODE_CLEANUP) {
-				list_del(&send_entry->list);
-				spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-				kfree(send_entry);
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-				continue;
-			}
-			if ((send_entry->seq_num < cm_node->tcp_cntxt.rem_ack_num) ||
-					(cm_node->state == NES_CM_STATE_TSA) ||
-					(cm_node->state == NES_CM_STATE_CLOSED)) {
-				skb = send_entry->skb;
-				list_del(&send_entry->list);
-				spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-				kfree(send_entry);
-				dev_kfree_skb_any(skb);
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+
+			if ((cm_node->state == NES_CM_STATE_TSA) ||
+				(cm_node->state == NES_CM_STATE_CLOSED)) {
+				free_retrans_entry(cm_node);
 				continue;
 			}
 
-			if (!send_entry->retranscount || !send_entry->retrycount) {
+			if (!send_entry->retranscount ||
+				!send_entry->retrycount) {
 				cm_packets_dropped++;
-				skb = send_entry->skb;
-				list_del(&send_entry->list);
-				spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-				dev_kfree_skb_any(skb);
-				kfree(send_entry);
-				if (cm_node->state == NES_CM_STATE_SYN_RCVD) {
-					/* this node never even generated an indication up to the cm */
+				last_state = cm_node->state;
+				cm_node->state = NES_CM_STATE_CLOSED;
+				free_retrans_entry(cm_node);
+				spin_unlock_irqrestore(
+					&cm_node->retrans_list_lock, flags);
+				if (last_state == NES_CM_STATE_SYN_RCVD)
 					rem_ref_cm_node(cm_core, cm_node);
-				} else {
-					cm_node->state = NES_CM_STATE_CLOSED;
-					create_event(cm_node, NES_CM_EVENT_ABORTED);
-				}
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+				else
+					create_event(cm_node,
+						NES_CM_EVENT_ABORTED);
+				spin_lock_irqsave(&cm_node->retrans_list_lock,
+					flags);
 				continue;
 			}
-			/* this seems like the correct place, but leave send entry unprotected */
-			/* spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags); */
 			atomic_inc(&send_entry->skb->users);
 			cm_packets_retrans++;
-			nes_debug(NES_DBG_CM, "Retransmitting send_entry %p for node %p,"
-					" jiffies = %lu, time to send =  %lu, retranscount = %u, "
-					"send_entry->seq_num = 0x%08X, cm_node->tcp_cntxt.rem_ack_num = 0x%08X\n",
-					send_entry, cm_node, jiffies, send_entry->timetosend, send_entry->retranscount,
-					send_entry->seq_num, cm_node->tcp_cntxt.rem_ack_num);
-
-			spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
+			nes_debug(NES_DBG_CM, "Retransmitting send_entry %p "
+				"for node %p, jiffies = %lu, time to send = "
+				"%lu, retranscount = %u, send_entry->seq_num = "
+				"0x%08X, cm_node->tcp_cntxt.rem_ack_num = "
+				"0x%08X\n", send_entry, cm_node, jiffies,
+				send_entry->timetosend,
+				send_entry->retranscount,
+				send_entry->seq_num,
+				cm_node->tcp_cntxt.rem_ack_num);
+
+			spin_unlock_irqrestore(&cm_node->retrans_list_lock,
+				flags);
 			ret = nes_nic_cm_xmit(send_entry->skb, cm_node->netdev);
+			spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
 			if (ret != NETDEV_TX_OK) {
+				nes_debug(NES_DBG_CM, "rexmit failed for "
+					"node=%p\n", cm_node);
 				cm_packets_bounced++;
 				atomic_dec(&send_entry->skb->users);
 				send_entry->retrycount--;
 				nexttimeout = jiffies + NES_SHORT_TIME;
 				settimer = 1;
-				node_done = 1;
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
 				continue;
 			} else {
 				cm_packets_sent++;
 			}
-			spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-			list_del(&send_entry->list);
-			nes_debug(NES_DBG_CM, "Packet Sent: retrans count = %u, retry count = %u.\n",
-					send_entry->retranscount, send_entry->retrycount);
+			nes_debug(NES_DBG_CM, "Packet Sent: retrans count = "
+				"%u, retry count = %u.\n",
+				send_entry->retranscount,
+				send_entry->retrycount);
 			if (send_entry->send_retrans) {
 				send_entry->retranscount--;
-				send_entry->timetosend = jiffies + NES_RETRY_TIMEOUT;
-				if (nexttimeout > send_entry->timetosend || !settimer) {
+				send_entry->timetosend = jiffies +
+					NES_RETRY_TIMEOUT;
+				if (nexttimeout > send_entry->timetosend ||
+					!settimer) {
 					nexttimeout = send_entry->timetosend;
 					settimer = 1;
 				}
-				list_add(&send_entry->list, &cm_node->retrans_list);
-				continue;
 			} else {
 				int close_when_complete;
-				skb = send_entry->skb;
-				close_when_complete = send_entry->close_when_complete;
-				spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-				if (close_when_complete) {
-					BUG_ON(atomic_read(&cm_node->ref_count) == 1);
-					rem_ref_cm_node(cm_core, cm_node);
-				}
-				dev_kfree_skb_any(skb);
-				kfree(send_entry);
-				spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-				continue;
+				close_when_complete =
+					send_entry->close_when_complete;
+				nes_debug(NES_DBG_CM, "cm_node=%p state=%d\n",
+					cm_node, cm_node->state);
+				free_retrans_entry(cm_node);
+				if (close_when_complete)
+					rem_ref_cm_node(cm_node->cm_core,
+						cm_node);
 			}
-		}
-		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-
-		rem_ref_cm_node(cm_core, cm_node);
+		} while (0);
 
+		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
+		rem_ref_cm_node(cm_node->cm_core, cm_node);
 		spin_lock_irqsave(&cm_core->ht_lock, flags);
-		if (ret != NETDEV_TX_OK)
+		if (ret != NETDEV_TX_OK) {
+			nes_debug(NES_DBG_CM, "rexmit failed for cm_node=%p\n",
+				cm_node);
 			break;
+		}
 	}
 	spin_unlock_irqrestore(&cm_core->ht_lock, flags);
 
@@ -667,14 +636,14 @@ static void nes_cm_timer_tick(unsigned long pass)
 /**
  * send_syn
  */
-static int send_syn(struct nes_cm_node *cm_node, u32 sendack)
+static int send_syn(struct nes_cm_node *cm_node, u32 sendack,
+	struct sk_buff *skb)
 {
 	int ret;
 	int flags = SET_SYN;
-	struct sk_buff *skb;
 	char optionsbuffer[sizeof(struct option_mss) +
-			sizeof(struct option_windowscale) +
-			sizeof(struct option_base) + 1];
+		sizeof(struct option_windowscale) + sizeof(struct option_base) +
+		TCP_OPTIONS_PADDING];
 
 	int optionssize = 0;
 	/* Sending MSS option */
@@ -695,8 +664,7 @@ static int send_syn(struct nes_cm_node *cm_node, u32 sendack)
 	options->as_windowscale.shiftcount = cm_node->tcp_cntxt.rcv_wscale;
 	optionssize += sizeof(struct option_windowscale);
 
-	if (sendack && !(NES_DRV_OPT_SUPRESS_OPTION_BC & nes_drv_opt)
-			) {
+	if (sendack && !(NES_DRV_OPT_SUPRESS_OPTION_BC & nes_drv_opt)) {
 		options = (union all_known_options *)&optionsbuffer[optionssize];
 		options->as_base.optionnum = OPTION_NUMBER_WRITE0;
 		options->as_base.length = sizeof(struct option_base);
@@ -714,7 +682,8 @@ static int send_syn(struct nes_cm_node *cm_node, u32 sendack)
 	options->as_end = OPTION_NUMBER_END;
 	optionssize += 1;
 
-	skb = get_free_pkt(cm_node);
+	if (!skb)
+		skb = get_free_pkt(cm_node);
 	if (!skb) {
 		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
 		return -1;
@@ -733,18 +702,18 @@ static int send_syn(struct nes_cm_node *cm_node, u32 sendack)
 /**
  * send_reset
  */
-static int send_reset(struct nes_cm_node *cm_node)
+static int send_reset(struct nes_cm_node *cm_node, struct sk_buff *skb)
 {
 	int ret;
-	struct sk_buff *skb = get_free_pkt(cm_node);
 	int flags = SET_RST | SET_ACK;
 
+	if (!skb)
+		skb = get_free_pkt(cm_node);
 	if (!skb) {
 		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
 		return -1;
 	}
 
-	add_ref_cm_node(cm_node);
 	form_cm_frame(skb, cm_node, NULL, 0, NULL, 0, flags);
 	ret = schedule_nes_timer(cm_node, skb, NES_TIMER_TYPE_SEND, 0, 1);
 
@@ -755,10 +724,12 @@ static int send_reset(struct nes_cm_node *cm_node)
 /**
  * send_ack
  */
-static int send_ack(struct nes_cm_node *cm_node)
+static int send_ack(struct nes_cm_node *cm_node, struct sk_buff *skb)
 {
 	int ret;
-	struct sk_buff *skb = get_free_pkt(cm_node);
+
+	if (!skb)
+		skb = get_free_pkt(cm_node);
 
 	if (!skb) {
 		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
@@ -922,7 +893,8 @@ static int add_hte_node(struct nes_cm_core *cm_core, struct nes_cm_node *cm_node
 	if (!cm_node || !cm_core)
 		return -EINVAL;
 
-	nes_debug(NES_DBG_CM, "Adding Node to Active Connection HT\n");
+	nes_debug(NES_DBG_CM, "Adding Node %p to Active Connection HT\n",
+		cm_node);
 
 	/* first, make an index into our hash table */
 	hashkey = make_hashkey(cm_node->loc_port, cm_node->loc_addr,
@@ -946,10 +918,35 @@ static int add_hte_node(struct nes_cm_core *cm_core, struct nes_cm_node *cm_node
  * mini_cm_dec_refcnt_listen
  */
 static int mini_cm_dec_refcnt_listen(struct nes_cm_core *cm_core,
-		struct nes_cm_listener *listener, int free_hanging_nodes)
+	struct nes_cm_listener *listener, int free_hanging_nodes)
 {
 	int ret = 1;
 	unsigned long flags;
+	struct list_head *list_pos = NULL;
+	struct list_head *list_temp = NULL;
+	struct nes_cm_node *cm_node = NULL;
+
+	nes_debug(NES_DBG_CM, "attempting listener= %p free_nodes= %d, "
+		"refcnt=%d\n", listener, free_hanging_nodes,
+		atomic_read(&listener->ref_count));
+	/* free non-accelerated child nodes for this listener */
+	if (free_hanging_nodes) {
+		spin_lock_irqsave(&cm_core->ht_lock, flags);
+		list_for_each_safe(list_pos, list_temp,
+			&g_cm_core->connected_nodes) {
+			cm_node = container_of(list_pos, struct nes_cm_node,
+				list);
+			if ((cm_node->listener == listener) &&
+				(!cm_node->accelerated)) {
+				cleanup_retrans_entry(cm_node);
+				spin_unlock_irqrestore(&cm_core->ht_lock,
+					flags);
+				send_reset(cm_node, NULL);
+				spin_lock_irqsave(&cm_core->ht_lock, flags);
+			}
+		}
+		spin_unlock_irqrestore(&cm_core->ht_lock, flags);
+	}
 	spin_lock_irqsave(&cm_core->listen_list_lock, flags);
 	if (!atomic_dec_return(&listener->ref_count)) {
 		list_del(&listener->list);
@@ -1067,18 +1064,18 @@ static struct nes_cm_node *make_cm_node(struct nes_cm_core *cm_core,
 	cm_node->loc_port = cm_info->loc_port;
 	cm_node->rem_port = cm_info->rem_port;
 	cm_node->send_write0 = send_first;
-	nes_debug(NES_DBG_CM, "Make node addresses : loc = " NIPQUAD_FMT ":%x, rem = " NIPQUAD_FMT ":%x\n",
-		  HIPQUAD(cm_node->loc_addr), cm_node->loc_port,
-		  HIPQUAD(cm_node->rem_addr), cm_node->rem_port);
+	nes_debug(NES_DBG_CM, "Make node addresses : loc = " NIPQUAD_FMT
+			":%x, rem = " NIPQUAD_FMT ":%x\n",
+			HIPQUAD(cm_node->loc_addr), cm_node->loc_port,
+			HIPQUAD(cm_node->rem_addr), cm_node->rem_port);
 	cm_node->listener = listener;
 	cm_node->netdev = nesvnic->netdev;
 	cm_node->cm_id = cm_info->cm_id;
 	memcpy(cm_node->loc_mac, nesvnic->netdev->dev_addr, ETH_ALEN);
 
-	nes_debug(NES_DBG_CM, "listener=%p, cm_id=%p\n",
-			cm_node->listener, cm_node->cm_id);
+	nes_debug(NES_DBG_CM, "listener=%p, cm_id=%p\n", cm_node->listener,
+			cm_node->cm_id);
 
-	INIT_LIST_HEAD(&cm_node->retrans_list);
 	spin_lock_init(&cm_node->retrans_list_lock);
 	INIT_LIST_HEAD(&cm_node->recv_list);
 	spin_lock_init(&cm_node->recv_list_lock);
@@ -1142,10 +1139,9 @@ static int add_ref_cm_node(struct nes_cm_node *cm_node)
  * rem_ref_cm_node - destroy an instance of a cm node
  */
 static int rem_ref_cm_node(struct nes_cm_core *cm_core,
-		struct nes_cm_node *cm_node)
+	struct nes_cm_node *cm_node)
 {
 	unsigned long flags, qplockflags;
-	struct nes_timer_entry *send_entry;
 	struct nes_timer_entry *recv_entry;
 	struct iw_cm_id *cm_id;
 	struct list_head *list_core, *list_node_temp;
@@ -1169,48 +1165,33 @@ static int rem_ref_cm_node(struct nes_cm_core *cm_core,
 		atomic_dec(&cm_node->listener->pend_accepts_cnt);
 		BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0);
 	}
-
-	spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-	list_for_each_safe(list_core, list_node_temp, &cm_node->retrans_list) {
-		send_entry = container_of(list_core, struct nes_timer_entry, list);
-		list_del(&send_entry->list);
-		spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-		dev_kfree_skb_any(send_entry->skb);
-		kfree(send_entry);
-		spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
-		continue;
-	}
-	spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
-
+	BUG_ON(cm_node->send_entry);
 	spin_lock_irqsave(&cm_node->recv_list_lock, flags);
 	list_for_each_safe(list_core, list_node_temp, &cm_node->recv_list) {
-		recv_entry = container_of(list_core, struct nes_timer_entry, list);
+		recv_entry = container_of(list_core, struct nes_timer_entry,
+				list);
 		list_del(&recv_entry->list);
 		cm_id = cm_node->cm_id;
 		spin_unlock_irqrestore(&cm_node->recv_list_lock, flags);
-		if (recv_entry->type == NES_TIMER_TYPE_CLOSE) {
-			nesqp = (struct nes_qp *)recv_entry->skb;
-			spin_lock_irqsave(&nesqp->lock, qplockflags);
-			if (nesqp->cm_id) {
-				nes_debug(NES_DBG_CM, "QP%u: cm_id = %p: ****** HIT A NES_TIMER_TYPE_CLOSE"
-						" with something to do!!! ******\n",
-						nesqp->hwqp.qp_id, cm_id);
-				nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
-				nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
-				nesqp->ibqp_state = IB_QPS_ERR;
-				spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-				nes_cm_disconn(nesqp);
-			} else {
-				spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-				nes_debug(NES_DBG_CM, "QP%u: cm_id = %p: ****** HIT A NES_TIMER_TYPE_CLOSE"
-						" with nothing to do!!! ******\n",
-						nesqp->hwqp.qp_id, cm_id);
-				nes_rem_ref(&nesqp->ibqp);
-			}
-			cm_id->rem_ref(cm_id);
-		} else if (recv_entry->type == NES_TIMER_TYPE_RECV) {
-			dev_kfree_skb_any(recv_entry->skb);
+		nesqp = (struct nes_qp *)recv_entry->skb;
+		spin_lock_irqsave(&nesqp->lock, qplockflags);
+		if (nesqp->cm_id) {
+			nes_debug(NES_DBG_CM, "QP%u: cm_id = %p: HIT A "
+				"NES_TIMER_TYPE_CLOSE with something to do!\n",
+				nesqp->hwqp.qp_id, cm_id);
+			nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
+			nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
+			nesqp->ibqp_state = IB_QPS_ERR;
+			spin_unlock_irqrestore(&nesqp->lock, qplockflags);
+			nes_cm_disconn(nesqp);
+		} else {
+			spin_unlock_irqrestore(&nesqp->lock, qplockflags);
+			nes_debug(NES_DBG_CM, "QP%u: cm_id = %p: HIT A "
+				"NES_TIMER_TYPE_CLOSE with nothing to do!\n",
+				nesqp->hwqp.qp_id, cm_id);
 		}
+		cm_id->rem_ref(cm_id);
+
 		kfree(recv_entry);
 		spin_lock_irqsave(&cm_node->recv_list_lock, flags);
 	}
@@ -1221,23 +1202,31 @@ static int rem_ref_cm_node(struct nes_cm_core *cm_core,
 	} else {
 		if (cm_node->apbvt_set && cm_node->nesvnic) {
 			nes_manage_apbvt(cm_node->nesvnic, cm_node->loc_port,
-					PCI_FUNC(cm_node->nesvnic->nesdev->pcidev->devfn),
-					NES_MANAGE_APBVT_DEL);
+				PCI_FUNC(
+				cm_node->nesvnic->nesdev->pcidev->devfn),
+				NES_MANAGE_APBVT_DEL);
 		}
 	}
 
-	kfree(cm_node);
 	atomic_dec(&cm_core->node_cnt);
 	atomic_inc(&cm_nodes_destroyed);
+	nesqp = cm_node->nesqp;
+	if (nesqp) {
+		nesqp->cm_node = NULL;
+		nes_rem_ref(&nesqp->ibqp);
+		cm_node->nesqp = NULL;
+	}
 
+	cm_node->freed = 1;
+	kfree(cm_node);
 	return 0;
 }
 
-
 /**
  * process_options
  */
-static int process_options(struct nes_cm_node *cm_node, u8 *optionsloc, u32 optionsize, u32 syn_packet)
+static int process_options(struct nes_cm_node *cm_node, u8 *optionsloc,
+	u32 optionsize, u32 syn_packet)
 {
 	u32 tmp;
 	u32 offset = 0;
@@ -1247,35 +1236,37 @@ static int process_options(struct nes_cm_node *cm_node, u8 *optionsloc, u32 opti
 	while (offset < optionsize) {
 		all_options = (union all_known_options *)(optionsloc + offset);
 		switch (all_options->as_base.optionnum) {
-			case OPTION_NUMBER_END:
-				offset = optionsize;
-				break;
-			case OPTION_NUMBER_NONE:
-				offset += 1;
-				continue;
-			case OPTION_NUMBER_MSS:
-				nes_debug(NES_DBG_CM, "%s: MSS Length: %d Offset: %d Size: %d\n",
-						__func__,
-						all_options->as_mss.length, offset, optionsize);
-				got_mss_option = 1;
-				if (all_options->as_mss.length != 4) {
-					return 1;
-				} else {
-					tmp = ntohs(all_options->as_mss.mss);
-					if (tmp > 0 && tmp < cm_node->tcp_cntxt.mss)
-						cm_node->tcp_cntxt.mss = tmp;
-				}
-				break;
-			case OPTION_NUMBER_WINDOW_SCALE:
-				cm_node->tcp_cntxt.snd_wscale = all_options->as_windowscale.shiftcount;
-				break;
-			case OPTION_NUMBER_WRITE0:
-				cm_node->send_write0 = 1;
-				break;
-			default:
-				nes_debug(NES_DBG_CM, "TCP Option not understood: %x\n",
-						all_options->as_base.optionnum);
-				break;
+		case OPTION_NUMBER_END:
+			offset = optionsize;
+			break;
+		case OPTION_NUMBER_NONE:
+			offset += 1;
+			continue;
+		case OPTION_NUMBER_MSS:
+			nes_debug(NES_DBG_CM, "%s: MSS Length: %d Offset: %d "
+				"Size: %d\n", __func__,
+				all_options->as_mss.length, offset, optionsize);
+			got_mss_option = 1;
+			if (all_options->as_mss.length != 4) {
+				return 1;
+			} else {
+				tmp = ntohs(all_options->as_mss.mss);
+				if (tmp > 0 && tmp <
+					cm_node->tcp_cntxt.mss)
+					cm_node->tcp_cntxt.mss = tmp;
+			}
+			break;
+		case OPTION_NUMBER_WINDOW_SCALE:
+			cm_node->tcp_cntxt.snd_wscale =
+				all_options->as_windowscale.shiftcount;
+			break;
+		case OPTION_NUMBER_WRITE0:
+			cm_node->send_write0 = 1;
+			break;
+		default:
+			nes_debug(NES_DBG_CM, "TCP Option not understood: %x\n",
+				all_options->as_base.optionnum);
+			break;
 		}
 		offset += all_options->as_base.length;
 	}
@@ -1284,300 +1275,491 @@ static int process_options(struct nes_cm_node *cm_node, u8 *optionsloc, u32 opti
 	return 0;
 }
 
+static void drop_packet(struct sk_buff *skb)
+{
+	atomic_inc(&cm_accel_dropped_pkts);
+	dev_kfree_skb_any(skb);
+}
 
-/**
- * process_packet
- */
-static int process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb,
-			  struct nes_cm_core *cm_core)
+static void handle_fin_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
 {
-	int optionsize;
-	int datasize;
-	int ret = 0;
-	struct tcphdr *tcph = tcp_hdr(skb);
-	u32 inc_sequence;
-	if (cm_node->state == NES_CM_STATE_SYN_SENT && tcph->syn) {
-		inc_sequence = ntohl(tcph->seq);
-		cm_node->tcp_cntxt.rcv_nxt = inc_sequence;
+	atomic_inc(&cm_resets_recvd);
+	nes_debug(NES_DBG_CM, "Received FIN, cm_node = %p, state = %u. "
+		"refcnt=%d\n", cm_node, cm_node->state,
+		atomic_read(&cm_node->ref_count));
+	cm_node->tcp_cntxt.rcv_nxt++;
+	cleanup_retrans_entry(cm_node);
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_RCVD:
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_MPAREQ_SENT:
+		cm_node->state = NES_CM_STATE_LAST_ACK;
+		send_fin(cm_node, skb);
+		break;
+	case NES_CM_STATE_FIN_WAIT1:
+		cm_node->state = NES_CM_STATE_CLOSING;
+		send_ack(cm_node, skb);
+		break;
+	case NES_CM_STATE_FIN_WAIT2:
+		cm_node->state = NES_CM_STATE_TIME_WAIT;
+		send_ack(cm_node, skb);
+		cm_node->state = NES_CM_STATE_CLOSED;
+		break;
+	case NES_CM_STATE_TSA:
+	default:
+		nes_debug(NES_DBG_CM, "Error Rcvd FIN for node-%p state = %d\n",
+			cm_node, cm_node->state);
+		drop_packet(skb);
+		break;
 	}
+}
 
-	if ((!tcph) || (cm_node->state == NES_CM_STATE_TSA)) {
-		BUG_ON(!tcph);
-		atomic_inc(&cm_accel_dropped_pkts);
-		return -1;
-	}
 
-	if (tcph->rst) {
-		atomic_inc(&cm_resets_recvd);
-		nes_debug(NES_DBG_CM, "Received Reset, cm_node = %p, state = %u. refcnt=%d\n",
-				cm_node, cm_node->state, atomic_read(&cm_node->ref_count));
-		switch (cm_node->state) {
-			case NES_CM_STATE_LISTENING:
-				rem_ref_cm_node(cm_core, cm_node);
-				break;
-			case NES_CM_STATE_TSA:
-			case NES_CM_STATE_CLOSED:
-				break;
-			case NES_CM_STATE_SYN_RCVD:
-					nes_debug(NES_DBG_CM, "Received a reset for local 0x%08X:%04X,"
-							" remote 0x%08X:%04X, node state = %u\n",
-							cm_node->loc_addr, cm_node->loc_port,
-							cm_node->rem_addr, cm_node->rem_port,
-							cm_node->state);
-				rem_ref_cm_node(cm_core, cm_node);
-				break;
-			case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
-			case NES_CM_STATE_ESTABLISHED:
-			case NES_CM_STATE_MPAREQ_SENT:
-			default:
-					nes_debug(NES_DBG_CM, "Received a reset for local 0x%08X:%04X,"
-							" remote 0x%08X:%04X, node state = %u refcnt=%d\n",
-							cm_node->loc_addr, cm_node->loc_port,
-							cm_node->rem_addr, cm_node->rem_port,
-							cm_node->state, atomic_read(&cm_node->ref_count));
-				/* create event */
-				cm_node->state = NES_CM_STATE_CLOSED;
+static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
+{
 
-				create_event(cm_node, NES_CM_EVENT_ABORTED);
-				break;
+	int	reset = 0;	/* whether to send reset in case of err.. */
+	atomic_inc(&cm_resets_recvd);
+	nes_debug(NES_DBG_CM, "Received Reset, cm_node = %p, state = %u."
+			" refcnt=%d\n", cm_node, cm_node->state,
+			atomic_read(&cm_node->ref_count));
+	cleanup_retrans_entry(cm_node);
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_MPAREQ_SENT:
+		nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
+			"listener=%p state=%d\n", __func__, __LINE__, cm_node,
+			cm_node->listener, cm_node->state);
+		active_open_err(cm_node, skb, reset);
+		break;
+	/* For PASSIVE open states, remove the cm_node event */
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_SYN_RCVD:
+	case NES_CM_STATE_LISTENING:
+		nes_debug(NES_DBG_CM, "Bad state %s[%u]\n", __func__, __LINE__);
+		passive_open_err(cm_node, skb, reset);
+		break;
+	case NES_CM_STATE_TSA:
+	default:
+		break;
+	}
+}
 
+static void handle_rcv_mpa(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	enum nes_cm_event_type type)
+{
+
+	int	ret;
+	int datasize = skb->len;
+	u8 *dataloc = skb->data;
+	ret = parse_mpa(cm_node, dataloc, datasize);
+	if (ret < 0) {
+		nes_debug(NES_DBG_CM, "didn't like MPA Request\n");
+		if (type == NES_CM_EVENT_CONNECTED) {
+			nes_debug(NES_DBG_CM, "%s[%u] create abort for "
+				"cm_node=%p listener=%p state=%d\n", __func__,
+				__LINE__, cm_node, cm_node->listener,
+				cm_node->state);
+			active_open_err(cm_node, skb, 1);
+		} else {
+			passive_open_err(cm_node, skb, 1);
 		}
-		return -1;
+	} else {
+		cleanup_retrans_entry(cm_node);
+		dev_kfree_skb_any(skb);
+		if (type == NES_CM_EVENT_CONNECTED)
+			cm_node->state = NES_CM_STATE_TSA;
+		create_event(cm_node, type);
+
+	}
+	return ;
+}
+
+static void indicate_pkt_err(struct nes_cm_node *cm_node, struct sk_buff *skb)
+{
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_MPAREQ_SENT:
+		nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
+			"listener=%p state=%d\n", __func__, __LINE__, cm_node,
+			cm_node->listener, cm_node->state);
+		active_open_err(cm_node, skb, 1);
+		break;
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_SYN_RCVD:
+		passive_open_err(cm_node, skb, 1);
+		break;
+	case NES_CM_STATE_TSA:
+	default:
+		drop_packet(skb);
 	}
+}
+
+static int check_syn(struct nes_cm_node *cm_node, struct tcphdr *tcph,
+	struct sk_buff *skb)
+{
+	int err;
+
+	err = ((ntohl(tcph->ack_seq) == cm_node->tcp_cntxt.loc_seq_num))? 0 : 1;
+	if (err)
+		active_open_err(cm_node, skb, 1);
+
+	return err;
+}
+
+static int check_seq(struct nes_cm_node *cm_node, struct tcphdr *tcph,
+	struct sk_buff *skb)
+{
+	int err = 0;
+	u32 seq;
+	u32 ack_seq;
+	u32 loc_seq_num = cm_node->tcp_cntxt.loc_seq_num;
+	u32 rcv_nxt = cm_node->tcp_cntxt.rcv_nxt;
+	u32 rcv_wnd;
+	seq = ntohl(tcph->seq);
+	ack_seq = ntohl(tcph->ack_seq);
+	rcv_wnd = cm_node->tcp_cntxt.rcv_wnd;
+	if (ack_seq != loc_seq_num)
+		err = 1;
+	else if ((seq + rcv_wnd) < rcv_nxt)
+		err = 1;
+	if (err) {
+		nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
+			"listener=%p state=%d\n", __func__, __LINE__, cm_node,
+			cm_node->listener, cm_node->state);
+		indicate_pkt_err(cm_node, skb);
+		nes_debug(NES_DBG_CM, "seq ERROR cm_node =%p seq=0x%08X "
+			"rcv_nxt=0x%08X rcv_wnd=0x%x\n", cm_node, seq, rcv_nxt,
+			rcv_wnd);
+	}
+	return err;
+}
+
+/*
+ * handle_syn_pkt() is for Passive node. The syn packet is received when a node
+ * is created with a listener or it may comein as rexmitted packet which in
+ * that case will be just dropped.
+ */
+
+static void handle_syn_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
+{
+	int ret;
+	u32 inc_sequence;
+	int optionsize;
 
 	optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
+	skb_pull(skb, tcph->doff << 2);
+	inc_sequence = ntohl(tcph->seq);
 
-	skb_pull(skb, ip_hdr(skb)->ihl << 2);
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_MPAREQ_SENT:
+		/* Rcvd syn on active open connection*/
+		active_open_err(cm_node, skb, 1);
+		break;
+	case NES_CM_STATE_LISTENING:
+		/* Passive OPEN */
+		cm_node->accept_pend = 1;
+		atomic_inc(&cm_node->listener->pend_accepts_cnt);
+		if (atomic_read(&cm_node->listener->pend_accepts_cnt) >
+				cm_node->listener->backlog) {
+			nes_debug(NES_DBG_CM, "drop syn due to backlog "
+				"pressure \n");
+			cm_backlog_drops++;
+			passive_open_err(cm_node, skb, 0);
+			break;
+		}
+		ret = handle_tcp_options(cm_node, tcph, skb, optionsize,
+			1);
+		if (ret) {
+			passive_open_err(cm_node, skb, 0);
+			/* drop pkt */
+			break;
+		}
+		cm_node->tcp_cntxt.rcv_nxt = inc_sequence + 1;
+		BUG_ON(cm_node->send_entry);
+		cm_node->state = NES_CM_STATE_SYN_RCVD;
+		send_syn(cm_node, 1, skb);
+		break;
+	case NES_CM_STATE_TSA:
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_FIN_WAIT1:
+	case NES_CM_STATE_FIN_WAIT2:
+	case NES_CM_STATE_MPAREQ_RCVD:
+	case NES_CM_STATE_LAST_ACK:
+	case NES_CM_STATE_CLOSING:
+	case NES_CM_STATE_UNKNOWN:
+	case NES_CM_STATE_CLOSED:
+	default:
+		drop_packet(skb);
+		break;
+	}
+}
+
+static void handle_synack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
+{
+
+	int ret;
+	u32 inc_sequence;
+	int optionsize;
+
+	optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
 	skb_pull(skb, tcph->doff << 2);
+	inc_sequence = ntohl(tcph->seq);
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_SENT:
+		/* active open */
+		if (check_syn(cm_node, tcph, skb))
+			return;
+		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
+		/* setup options */
+		ret = handle_tcp_options(cm_node, tcph, skb, optionsize, 0);
+		if (ret) {
+			nes_debug(NES_DBG_CM, "cm_node=%p tcp_options failed\n",
+				cm_node);
+			break;
+		}
+		cleanup_retrans_entry(cm_node);
+		cm_node->tcp_cntxt.rcv_nxt = inc_sequence + 1;
+		send_mpa_request(cm_node, skb);
+		cm_node->state = NES_CM_STATE_MPAREQ_SENT;
+		break;
+	case NES_CM_STATE_MPAREQ_RCVD:
+		/* passive open, so should not be here */
+		passive_open_err(cm_node, skb, 1);
+		break;
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_FIN_WAIT1:
+	case NES_CM_STATE_FIN_WAIT2:
+	case NES_CM_STATE_LAST_ACK:
+	case NES_CM_STATE_TSA:
+	case NES_CM_STATE_CLOSING:
+	case NES_CM_STATE_UNKNOWN:
+	case NES_CM_STATE_CLOSED:
+	case NES_CM_STATE_MPAREQ_SENT:
+	default:
+		drop_packet(skb);
+		break;
+	}
+}
 
-	datasize = skb->len;
+static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct tcphdr *tcph)
+{
+	int datasize = 0;
+	u32 inc_sequence;
+	u32 rem_seq_ack;
+	u32 rem_seq;
+	if (check_seq(cm_node, tcph, skb))
+		return;
+
+	skb_pull(skb, tcph->doff << 2);
 	inc_sequence = ntohl(tcph->seq);
-	nes_debug(NES_DBG_CM, "datasize = %u, sequence = 0x%08X, ack_seq = 0x%08X,"
-			" rcv_nxt = 0x%08X Flags: %s %s.\n",
-			datasize, inc_sequence, ntohl(tcph->ack_seq),
-			cm_node->tcp_cntxt.rcv_nxt, (tcph->syn ? "SYN":""),
-			(tcph->ack ? "ACK":""));
-
-	if (!tcph->syn && (inc_sequence != cm_node->tcp_cntxt.rcv_nxt)
-		) {
-		nes_debug(NES_DBG_CM, "dropping packet, datasize = %u, sequence = 0x%08X,"
-				" ack_seq = 0x%08X, rcv_nxt = 0x%08X Flags: %s.\n",
-				datasize, inc_sequence, ntohl(tcph->ack_seq),
-				cm_node->tcp_cntxt.rcv_nxt, (tcph->ack ? "ACK":""));
-		if (cm_node->state == NES_CM_STATE_LISTENING) {
-			rem_ref_cm_node(cm_core, cm_node);
+	rem_seq = ntohl(tcph->seq);
+	rem_seq_ack =  ntohl(tcph->ack_seq);
+	datasize = skb->len;
+
+	switch (cm_node->state) {
+	case NES_CM_STATE_SYN_RCVD:
+		/* Passive OPEN */
+		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
+		cm_node->state = NES_CM_STATE_ESTABLISHED;
+		if (datasize) {
+			cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
+			cm_node->state = NES_CM_STATE_MPAREQ_RCVD;
+			handle_rcv_mpa(cm_node, skb, NES_CM_EVENT_MPA_REQ);
+		 } else { /* rcvd ACK only */
+			dev_kfree_skb_any(skb);
+			cleanup_retrans_entry(cm_node);
+		 }
+		break;
+	case NES_CM_STATE_ESTABLISHED:
+		/* Passive OPEN */
+		/* We expect mpa frame to be received only */
+		if (datasize) {
+			cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
+			cm_node->state = NES_CM_STATE_MPAREQ_RCVD;
+			handle_rcv_mpa(cm_node, skb,
+				NES_CM_EVENT_MPA_REQ);
+		} else
+			drop_packet(skb);
+		break;
+	case NES_CM_STATE_MPAREQ_SENT:
+		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
+		if (datasize) {
+			cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
+			handle_rcv_mpa(cm_node, skb, NES_CM_EVENT_CONNECTED);
+		} else { /* Could be just an ack pkt.. */
+			cleanup_retrans_entry(cm_node);
+			dev_kfree_skb_any(skb);
 		}
-		return -1;
+		break;
+	case NES_CM_STATE_FIN_WAIT1:
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_FIN_WAIT2:
+	case NES_CM_STATE_TSA:
+	case NES_CM_STATE_CLOSED:
+	case NES_CM_STATE_MPAREQ_RCVD:
+	case NES_CM_STATE_LAST_ACK:
+	case NES_CM_STATE_CLOSING:
+	case NES_CM_STATE_UNKNOWN:
+	default:
+		drop_packet(skb);
+		break;
 	}
+}
 
-		cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
 
 
+static int handle_tcp_options(struct nes_cm_node *cm_node, struct tcphdr *tcph,
+	struct sk_buff *skb, int optionsize, int passive)
+{
+	u8 *optionsloc = (u8 *)&tcph[1];
 	if (optionsize) {
-		u8 *optionsloc = (u8 *)&tcph[1];
-		if (process_options(cm_node, optionsloc, optionsize, (u32)tcph->syn)) {
-			nes_debug(NES_DBG_CM, "%s: Node %p, Sending RESET\n", __func__, cm_node);
-			send_reset(cm_node);
-			if (cm_node->state != NES_CM_STATE_SYN_SENT)
-			rem_ref_cm_node(cm_core, cm_node);
-			return 0;
+		if (process_options(cm_node, optionsloc, optionsize,
+			(u32)tcph->syn)) {
+			nes_debug(NES_DBG_CM, "%s: Node %p, Sending RESET\n",
+				__func__, cm_node);
+			if (passive)
+				passive_open_err(cm_node, skb, 0);
+			else
+				active_open_err(cm_node, skb, 0);
+			return 1;
 		}
-	} else if (tcph->syn)
-		cm_node->tcp_cntxt.mss = NES_CM_DEFAULT_MSS;
+	}
 
 	cm_node->tcp_cntxt.snd_wnd = ntohs(tcph->window) <<
 			cm_node->tcp_cntxt.snd_wscale;
 
-	if (cm_node->tcp_cntxt.snd_wnd > cm_node->tcp_cntxt.max_snd_wnd) {
+	if (cm_node->tcp_cntxt.snd_wnd > cm_node->tcp_cntxt.max_snd_wnd)
 		cm_node->tcp_cntxt.max_snd_wnd = cm_node->tcp_cntxt.snd_wnd;
-	}
+	return 0;
+}
 
-	if (tcph->ack) {
-		cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
-		switch (cm_node->state) {
-			case NES_CM_STATE_SYN_RCVD:
-			case NES_CM_STATE_SYN_SENT:
-				/* read and stash current sequence number */
-				if (cm_node->tcp_cntxt.rem_ack_num != cm_node->tcp_cntxt.loc_seq_num) {
-					nes_debug(NES_DBG_CM, "ERROR - cm_node->tcp_cntxt.rem_ack_num !="
-							" cm_node->tcp_cntxt.loc_seq_num\n");
-					send_reset(cm_node);
-					return 0;
-				}
-				if (cm_node->state == NES_CM_STATE_SYN_SENT)
-					cm_node->state = NES_CM_STATE_ONE_SIDE_ESTABLISHED;
-				else {
-						cm_node->state = NES_CM_STATE_ESTABLISHED;
-				}
-				break;
-			case NES_CM_STATE_LAST_ACK:
-				cm_node->state = NES_CM_STATE_CLOSED;
-				break;
-			case NES_CM_STATE_FIN_WAIT1:
-				cm_node->state = NES_CM_STATE_FIN_WAIT2;
-				break;
-			case NES_CM_STATE_CLOSING:
-				cm_node->state = NES_CM_STATE_TIME_WAIT;
-				/* need to schedule this to happen in 2MSL timeouts */
-				cm_node->state = NES_CM_STATE_CLOSED;
-				break;
-			case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
-			case NES_CM_STATE_ESTABLISHED:
-			case NES_CM_STATE_MPAREQ_SENT:
-			case NES_CM_STATE_CLOSE_WAIT:
-			case NES_CM_STATE_TIME_WAIT:
-			case NES_CM_STATE_CLOSED:
-				break;
-			case NES_CM_STATE_LISTENING:
-				nes_debug(NES_DBG_CM, "Received an ACK on a listening port (SYN %d)\n", tcph->syn);
-				cm_node->tcp_cntxt.loc_seq_num = ntohl(tcph->ack_seq);
-				send_reset(cm_node);
-				/* send_reset bumps refcount, this should have been a new node */
-				rem_ref_cm_node(cm_core, cm_node);
-				return -1;
-				break;
-			case NES_CM_STATE_TSA:
-				nes_debug(NES_DBG_CM, "Received a packet with the ack bit set while in TSA state\n");
-				break;
-			case NES_CM_STATE_UNKNOWN:
-			case NES_CM_STATE_INITED:
-			case NES_CM_STATE_ACCEPTING:
-			case NES_CM_STATE_FIN_WAIT2:
-			default:
-				nes_debug(NES_DBG_CM, "Received ack from unknown state: %x\n",
-						cm_node->state);
-				send_reset(cm_node);
-				break;
-		}
-	}
+/*
+ * active_open_err() will send reset() if flag set..
+ * It will also send ABORT event.
+ */
 
-	if (tcph->syn) {
-		if (cm_node->state == NES_CM_STATE_LISTENING) {
-			/* do not exceed backlog */
-			atomic_inc(&cm_node->listener->pend_accepts_cnt);
-			if (atomic_read(&cm_node->listener->pend_accepts_cnt) >
-					cm_node->listener->backlog) {
-				nes_debug(NES_DBG_CM, "drop syn due to backlog pressure \n");
-				cm_backlog_drops++;
-				atomic_dec(&cm_node->listener->pend_accepts_cnt);
-				rem_ref_cm_node(cm_core, cm_node);
-				return 0;
-			}
-			cm_node->accept_pend = 1;
+static void active_open_err(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	int reset)
+{
+	cleanup_retrans_entry(cm_node);
+	if (reset) {
+		nes_debug(NES_DBG_CM, "ERROR active err called for cm_node=%p, "
+				"state=%d\n", cm_node, cm_node->state);
+		add_ref_cm_node(cm_node);
+		send_reset(cm_node, skb);
+	} else
+		dev_kfree_skb_any(skb);
 
-		}
-		if (datasize == 0)
-			cm_node->tcp_cntxt.rcv_nxt ++;
+	cm_node->state = NES_CM_STATE_CLOSED;
+	create_event(cm_node, NES_CM_EVENT_ABORTED);
+}
 
-		if (cm_node->state == NES_CM_STATE_LISTENING) {
-			cm_node->state = NES_CM_STATE_SYN_RCVD;
-			send_syn(cm_node, 1);
-		}
-		if (cm_node->state == NES_CM_STATE_ONE_SIDE_ESTABLISHED) {
-			cm_node->state = NES_CM_STATE_ESTABLISHED;
-			/* send final handshake ACK */
-			ret = send_ack(cm_node);
-			if (ret < 0)
-				return ret;
+/*
+ * passive_open_err() will either do a reset() or will free up the skb and
+ * remove the cm_node.
+ */
 
-				cm_node->state = NES_CM_STATE_MPAREQ_SENT;
-				ret = send_mpa_request(cm_node);
-				if (ret < 0)
-					return ret;
-		}
+static void passive_open_err(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	int reset)
+{
+	cleanup_retrans_entry(cm_node);
+	cm_node->state = NES_CM_STATE_CLOSED;
+	if (reset) {
+		nes_debug(NES_DBG_CM, "passive_open_err sending RST for "
+			"cm_node=%p state =%d\n", cm_node, cm_node->state);
+		send_reset(cm_node, skb);
+	} else {
+		dev_kfree_skb_any(skb);
+		rem_ref_cm_node(cm_node->cm_core, cm_node);
 	}
+}
 
-	if (tcph->fin) {
-		cm_node->tcp_cntxt.rcv_nxt++;
-		switch (cm_node->state) {
-			case NES_CM_STATE_SYN_RCVD:
-			case NES_CM_STATE_SYN_SENT:
-			case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
-			case NES_CM_STATE_ESTABLISHED:
-			case NES_CM_STATE_ACCEPTING:
-			case NES_CM_STATE_MPAREQ_SENT:
-				cm_node->state = NES_CM_STATE_CLOSE_WAIT;
-				cm_node->state = NES_CM_STATE_LAST_ACK;
-				ret = send_fin(cm_node, NULL);
-				break;
-			case NES_CM_STATE_FIN_WAIT1:
-				cm_node->state = NES_CM_STATE_CLOSING;
-				ret = send_ack(cm_node);
-				break;
-			case NES_CM_STATE_FIN_WAIT2:
-				cm_node->state = NES_CM_STATE_TIME_WAIT;
-				cm_node->tcp_cntxt.loc_seq_num ++;
-				ret = send_ack(cm_node);
-				/* need to schedule this to happen in 2MSL timeouts */
-				cm_node->state = NES_CM_STATE_CLOSED;
-				break;
-			case NES_CM_STATE_CLOSE_WAIT:
-			case NES_CM_STATE_LAST_ACK:
-			case NES_CM_STATE_CLOSING:
-			case NES_CM_STATE_TSA:
-			default:
-				nes_debug(NES_DBG_CM, "Received a fin while in %x state\n",
-						cm_node->state);
-				ret = -EINVAL;
-				break;
-		}
+/*
+ * free_retrans_entry() routines assumes that the retrans_list_lock has
+ * been acquired before calling.
+ */
+static void free_retrans_entry(struct nes_cm_node *cm_node)
+{
+	struct nes_timer_entry *send_entry;
+	send_entry = cm_node->send_entry;
+	if (send_entry) {
+		cm_node->send_entry = NULL;
+		dev_kfree_skb_any(send_entry->skb);
+		kfree(send_entry);
+		rem_ref_cm_node(cm_node->cm_core, cm_node);
 	}
+}
 
-	if (datasize) {
-		u8 *dataloc = skb->data;
-		/* figure out what state we are in and handle transition to next state */
-		switch (cm_node->state) {
-			case NES_CM_STATE_LISTENING:
-			case NES_CM_STATE_SYN_RCVD:
-			case NES_CM_STATE_SYN_SENT:
-			case NES_CM_STATE_FIN_WAIT1:
-			case NES_CM_STATE_FIN_WAIT2:
-			case NES_CM_STATE_CLOSE_WAIT:
-			case NES_CM_STATE_LAST_ACK:
-			case NES_CM_STATE_CLOSING:
-				break;
-			case  NES_CM_STATE_MPAREQ_SENT:
-				/* recv the mpa res frame, ret=frame len (incl priv data) */
-				ret = parse_mpa(cm_node, dataloc, datasize);
-				if (ret < 0)
-					break;
-				/* set the req frame payload len in skb */
-				/* we are done handling this state, set node to a TSA state */
-				cm_node->state = NES_CM_STATE_TSA;
-				send_ack(cm_node);
-				create_event(cm_node, NES_CM_EVENT_CONNECTED);
-				break;
-
-			case  NES_CM_STATE_ESTABLISHED:
-				/* we are expecting an MPA req frame */
-				ret = parse_mpa(cm_node, dataloc, datasize);
-				if (ret < 0) {
-					break;
-				}
-				cm_node->state = NES_CM_STATE_TSA;
-				send_ack(cm_node);
-				/* we got a valid MPA request, create an event */
-				create_event(cm_node, NES_CM_EVENT_MPA_REQ);
-				break;
-			case  NES_CM_STATE_TSA:
-				handle_exception_pkt(cm_node, skb);
-				break;
-			case NES_CM_STATE_UNKNOWN:
-			case NES_CM_STATE_INITED:
-			default:
-				ret = -1;
-		}
-	}
+static void cleanup_retrans_entry(struct nes_cm_node *cm_node)
+{
+	unsigned long flags;
 
-	return ret;
+	spin_lock_irqsave(&cm_node->retrans_list_lock, flags);
+	free_retrans_entry(cm_node);
+	spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
 }
 
+/**
+ * process_packet
+ * Returns skb if to be freed, else it will return NULL if already used..
+ */
+static void process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb,
+	struct nes_cm_core *cm_core)
+{
+	enum nes_tcpip_pkt_type	pkt_type = NES_PKT_TYPE_UNKNOWN;
+	struct tcphdr *tcph = tcp_hdr(skb);
+	skb_pull(skb, ip_hdr(skb)->ihl << 2);
+
+	nes_debug(NES_DBG_CM, "process_packet: cm_node=%p state =%d syn=%d "
+		"ack=%d rst=%d fin=%d\n", cm_node, cm_node->state, tcph->syn,
+		tcph->ack, tcph->rst, tcph->fin);
+
+	if (tcph->rst)
+		pkt_type = NES_PKT_TYPE_RST;
+	else if (tcph->syn) {
+		pkt_type = NES_PKT_TYPE_SYN;
+		if (tcph->ack)
+			pkt_type = NES_PKT_TYPE_SYNACK;
+	} else if (tcph->fin)
+		pkt_type = NES_PKT_TYPE_FIN;
+	else if (tcph->ack)
+		pkt_type = NES_PKT_TYPE_ACK;
+
+	switch (pkt_type) {
+	case NES_PKT_TYPE_SYN:
+		handle_syn_pkt(cm_node, skb, tcph);
+		break;
+	case NES_PKT_TYPE_SYNACK:
+		handle_synack_pkt(cm_node, skb, tcph);
+		break;
+	case NES_PKT_TYPE_ACK:
+		handle_ack_pkt(cm_node, skb, tcph);
+		break;
+	case NES_PKT_TYPE_RST:
+		handle_rst_pkt(cm_node, skb, tcph);
+		break;
+	case NES_PKT_TYPE_FIN:
+		handle_fin_pkt(cm_node, skb, tcph);
+		break;
+	default:
+		drop_packet(skb);
+		break;
+	}
+}
 
 /**
  * mini_cm_listen - create a listen node with params
  */
 static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *cm_core,
-		struct nes_vnic *nesvnic, struct nes_cm_info *cm_info)
+	struct nes_vnic *nesvnic, struct nes_cm_info *cm_info)
 {
 	struct nes_cm_listener *listener;
 	unsigned long flags;
@@ -1644,37 +1826,36 @@ static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *cm_core,
 /**
  * mini_cm_connect - make a connection node with params
  */
-static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
-					   struct nes_vnic *nesvnic,
-					   struct ietf_mpa_frame *mpa_frame,
-					   struct nes_cm_info *cm_info)
+struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
+	struct nes_vnic *nesvnic, u16 private_data_len,
+	void *private_data, struct nes_cm_info *cm_info)
 {
 	int ret = 0;
 	struct nes_cm_node *cm_node;
 	struct nes_cm_listener *loopbackremotelistener;
 	struct nes_cm_node *loopbackremotenode;
 	struct nes_cm_info loopback_cm_info;
-
-	u16 mpa_frame_size = sizeof(struct ietf_mpa_frame) +
-			ntohs(mpa_frame->priv_data_len);
-
-	cm_info->loc_addr = htonl(cm_info->loc_addr);
-	cm_info->rem_addr = htonl(cm_info->rem_addr);
-	cm_info->loc_port = htons(cm_info->loc_port);
-	cm_info->rem_port = htons(cm_info->rem_port);
+	u16 mpa_frame_size = sizeof(struct ietf_mpa_frame) + private_data_len;
+	struct ietf_mpa_frame *mpa_frame = NULL;
 
 	/* create a CM connection node */
 	cm_node = make_cm_node(cm_core, nesvnic, cm_info, NULL);
 	if (!cm_node)
 		return NULL;
+	mpa_frame = &cm_node->mpa_frame;
+	strcpy(mpa_frame->key, IEFT_MPA_KEY_REQ);
+	mpa_frame->flags = IETF_MPA_FLAGS_CRC;
+	mpa_frame->rev =  IETF_MPA_VERSION;
+	mpa_frame->priv_data_len = htons(private_data_len);
 
 	/* set our node side to client (active) side */
 	cm_node->tcp_cntxt.client = 1;
 	cm_node->tcp_cntxt.rcv_wscale = NES_CM_DEFAULT_RCV_WND_SCALE;
 
 	if (cm_info->loc_addr == cm_info->rem_addr) {
-		loopbackremotelistener = find_listener(cm_core, cm_node->rem_addr,
-				cm_node->rem_port, NES_CM_LISTENER_ACTIVE_STATE);
+		loopbackremotelistener = find_listener(cm_core,
+				ntohl(nesvnic->local_ipaddr), cm_node->rem_port,
+				NES_CM_LISTENER_ACTIVE_STATE);
 		if (loopbackremotelistener == NULL) {
 			create_event(cm_node, NES_CM_EVENT_ABORTED);
 		} else {
@@ -1683,26 +1864,35 @@ static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
 			loopback_cm_info.loc_port = cm_info->rem_port;
 			loopback_cm_info.rem_port = cm_info->loc_port;
 			loopback_cm_info.cm_id = loopbackremotelistener->cm_id;
-			loopbackremotenode = make_cm_node(cm_core, nesvnic, &loopback_cm_info,
-					loopbackremotelistener);
+			loopbackremotenode = make_cm_node(cm_core, nesvnic,
+				&loopback_cm_info, loopbackremotelistener);
 			loopbackremotenode->loopbackpartner = cm_node;
-			loopbackremotenode->tcp_cntxt.rcv_wscale = NES_CM_DEFAULT_RCV_WND_SCALE;
+			loopbackremotenode->tcp_cntxt.rcv_wscale =
+				NES_CM_DEFAULT_RCV_WND_SCALE;
 			cm_node->loopbackpartner = loopbackremotenode;
-			memcpy(loopbackremotenode->mpa_frame_buf, &mpa_frame->priv_data,
-					mpa_frame_size);
-			loopbackremotenode->mpa_frame_size = mpa_frame_size -
-					sizeof(struct ietf_mpa_frame);
+			memcpy(loopbackremotenode->mpa_frame_buf, private_data,
+				private_data_len);
+			loopbackremotenode->mpa_frame_size = private_data_len;
 
-			/* we are done handling this state, set node to a TSA state */
+			/* we are done handling this state. */
+			/* set node to a TSA state */
 			cm_node->state = NES_CM_STATE_TSA;
-			cm_node->tcp_cntxt.rcv_nxt = loopbackremotenode->tcp_cntxt.loc_seq_num;
-			loopbackremotenode->tcp_cntxt.rcv_nxt = cm_node->tcp_cntxt.loc_seq_num;
-			cm_node->tcp_cntxt.max_snd_wnd = loopbackremotenode->tcp_cntxt.rcv_wnd;
-			loopbackremotenode->tcp_cntxt.max_snd_wnd = cm_node->tcp_cntxt.rcv_wnd;
-			cm_node->tcp_cntxt.snd_wnd = loopbackremotenode->tcp_cntxt.rcv_wnd;
-			loopbackremotenode->tcp_cntxt.snd_wnd = cm_node->tcp_cntxt.rcv_wnd;
-			cm_node->tcp_cntxt.snd_wscale = loopbackremotenode->tcp_cntxt.rcv_wscale;
-			loopbackremotenode->tcp_cntxt.snd_wscale = cm_node->tcp_cntxt.rcv_wscale;
+			cm_node->tcp_cntxt.rcv_nxt =
+				loopbackremotenode->tcp_cntxt.loc_seq_num;
+			loopbackremotenode->tcp_cntxt.rcv_nxt =
+				cm_node->tcp_cntxt.loc_seq_num;
+			cm_node->tcp_cntxt.max_snd_wnd =
+				loopbackremotenode->tcp_cntxt.rcv_wnd;
+			loopbackremotenode->tcp_cntxt.max_snd_wnd =
+				cm_node->tcp_cntxt.rcv_wnd;
+			cm_node->tcp_cntxt.snd_wnd =
+				loopbackremotenode->tcp_cntxt.rcv_wnd;
+			loopbackremotenode->tcp_cntxt.snd_wnd =
+				cm_node->tcp_cntxt.rcv_wnd;
+			cm_node->tcp_cntxt.snd_wscale =
+				loopbackremotenode->tcp_cntxt.rcv_wscale;
+			loopbackremotenode->tcp_cntxt.snd_wscale =
+				cm_node->tcp_cntxt.rcv_wscale;
 
 			create_event(loopbackremotenode, NES_CM_EVENT_MPA_REQ);
 		}
@@ -1712,16 +1902,29 @@ static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
 	/* set our node side to client (active) side */
 	cm_node->tcp_cntxt.client = 1;
 	/* init our MPA frame ptr */
-	memcpy(&cm_node->mpa_frame, mpa_frame, mpa_frame_size);
+	memcpy(mpa_frame->priv_data, private_data, private_data_len);
+
 	cm_node->mpa_frame_size = mpa_frame_size;
 
 	/* send a syn and goto syn sent state */
 	cm_node->state = NES_CM_STATE_SYN_SENT;
-	ret = send_syn(cm_node, 0);
+	ret = send_syn(cm_node, 0, NULL);
+
+	if (ret) {
+		/* error in sending the syn free up the cm_node struct */
+		nes_debug(NES_DBG_CM, "Api - connect() FAILED: dest "
+			"addr=0x%08X, port=0x%04x, cm_node=%p, cm_id = %p.\n",
+			cm_node->rem_addr, cm_node->rem_port, cm_node,
+			cm_node->cm_id);
+		rem_ref_cm_node(cm_node->cm_core, cm_node);
+		cm_node = NULL;
+	}
 
-	nes_debug(NES_DBG_CM, "Api - connect(): dest addr=0x%08X, port=0x%04x,"
-			" cm_node=%p, cm_id = %p.\n",
-			cm_node->rem_addr, cm_node->rem_port, cm_node, cm_node->cm_id);
+	if (cm_node)
+		nes_debug(NES_DBG_CM, "Api - connect(): dest addr=0x%08X,"
+			"port=0x%04x, cm_node=%p, cm_id = %p.\n",
+			cm_node->rem_addr, cm_node->rem_port, cm_node,
+			cm_node->cm_id);
 
 	return cm_node;
 }
@@ -1731,8 +1934,8 @@ static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
  * mini_cm_accept - accept a connection
  * This function is never called
  */
-static int mini_cm_accept(struct nes_cm_core *cm_core, struct ietf_mpa_frame *mpa_frame,
-			  struct nes_cm_node *cm_node)
+static int mini_cm_accept(struct nes_cm_core *cm_core,
+	struct ietf_mpa_frame *mpa_frame, struct nes_cm_node *cm_node)
 {
 	return 0;
 }
@@ -1742,32 +1945,26 @@ static int mini_cm_accept(struct nes_cm_core *cm_core, struct ietf_mpa_frame *mp
  * mini_cm_reject - reject and teardown a connection
  */
 static int mini_cm_reject(struct nes_cm_core *cm_core,
-			  struct ietf_mpa_frame *mpa_frame,
-			  struct nes_cm_node *cm_node)
+	struct ietf_mpa_frame *mpa_frame, struct nes_cm_node *cm_node)
 {
 	int ret = 0;
-	struct sk_buff *skb;
-	u16 mpa_frame_size = sizeof(struct ietf_mpa_frame) +
-			ntohs(mpa_frame->priv_data_len);
 
-	skb = get_free_pkt(cm_node);
-	if (!skb) {
-		nes_debug(NES_DBG_CM, "Failed to get a Free pkt\n");
-		return -1;
-	}
-
-	/* send an MPA Request frame */
-	form_cm_frame(skb, cm_node, NULL, 0, mpa_frame, mpa_frame_size, SET_ACK | SET_FIN);
-	ret = schedule_nes_timer(cm_node, skb, NES_TIMER_TYPE_SEND, 1, 0);
+	nes_debug(NES_DBG_CM, "%s cm_node=%p type=%d state=%d\n",
+		__func__, cm_node, cm_node->tcp_cntxt.client, cm_node->state);
 
+	if (cm_node->tcp_cntxt.client)
+		return ret;
+	cleanup_retrans_entry(cm_node);
 	cm_node->state = NES_CM_STATE_CLOSED;
 	ret = send_fin(cm_node, NULL);
 
-	if (ret < 0) {
-		printk(KERN_INFO PFX "failed to send MPA Reply (reject)\n");
-		return ret;
+	if (cm_node->accept_pend) {
+		BUG_ON(!cm_node->listener);
+		atomic_dec(&cm_node->listener->pend_accepts_cnt);
+		BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0);
 	}
 
+	ret = send_reset(cm_node, NULL);
 	return ret;
 }
 
@@ -1783,35 +1980,39 @@ static int mini_cm_close(struct nes_cm_core *cm_core, struct nes_cm_node *cm_nod
 		return -EINVAL;
 
 	switch (cm_node->state) {
-		/* if passed in node is null, create a reference key node for node search */
-		/* check if we found an owner node for this pkt */
-		case NES_CM_STATE_SYN_RCVD:
-		case NES_CM_STATE_SYN_SENT:
-		case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
-		case NES_CM_STATE_ESTABLISHED:
-		case NES_CM_STATE_ACCEPTING:
-		case NES_CM_STATE_MPAREQ_SENT:
-			cm_node->state = NES_CM_STATE_FIN_WAIT1;
-			send_fin(cm_node, NULL);
-			break;
-		case NES_CM_STATE_CLOSE_WAIT:
-			cm_node->state = NES_CM_STATE_LAST_ACK;
-			send_fin(cm_node, NULL);
-			break;
-		case NES_CM_STATE_FIN_WAIT1:
-		case NES_CM_STATE_FIN_WAIT2:
-		case NES_CM_STATE_LAST_ACK:
-		case NES_CM_STATE_TIME_WAIT:
-		case NES_CM_STATE_CLOSING:
-			ret = -1;
-			break;
-		case NES_CM_STATE_LISTENING:
-		case NES_CM_STATE_UNKNOWN:
-		case NES_CM_STATE_INITED:
-		case NES_CM_STATE_CLOSED:
-		case NES_CM_STATE_TSA:
-			ret = rem_ref_cm_node(cm_core, cm_node);
-			break;
+	case NES_CM_STATE_SYN_RCVD:
+	case NES_CM_STATE_SYN_SENT:
+	case NES_CM_STATE_ONE_SIDE_ESTABLISHED:
+	case NES_CM_STATE_ESTABLISHED:
+	case NES_CM_STATE_ACCEPTING:
+	case NES_CM_STATE_MPAREQ_SENT:
+	case NES_CM_STATE_MPAREQ_RCVD:
+		cleanup_retrans_entry(cm_node);
+		send_reset(cm_node, NULL);
+		break;
+	case NES_CM_STATE_CLOSE_WAIT:
+		cm_node->state = NES_CM_STATE_LAST_ACK;
+		send_fin(cm_node, NULL);
+		break;
+	case NES_CM_STATE_FIN_WAIT1:
+	case NES_CM_STATE_FIN_WAIT2:
+	case NES_CM_STATE_LAST_ACK:
+	case NES_CM_STATE_TIME_WAIT:
+	case NES_CM_STATE_CLOSING:
+		ret = -1;
+		break;
+	case NES_CM_STATE_LISTENING:
+	case NES_CM_STATE_UNKNOWN:
+	case NES_CM_STATE_INITED:
+	case NES_CM_STATE_CLOSED:
+		ret = rem_ref_cm_node(cm_core, cm_node);
+		break;
+	case NES_CM_STATE_TSA:
+		if (cm_node->send_entry)
+			printk(KERN_ERR "ERROR Close got called from STATE_TSA "
+				"send_entry=%p\n", cm_node->send_entry);
+		ret = rem_ref_cm_node(cm_core, cm_node);
+		break;
 	}
 	cm_node->cm_id = NULL;
 	return ret;
@@ -1822,25 +2023,30 @@ static int mini_cm_close(struct nes_cm_core *cm_core, struct nes_cm_node *cm_nod
  * recv_pkt - recv an ETHERNET packet, and process it through CM
  * node state machine
  */
-static int mini_cm_recv_pkt(struct nes_cm_core *cm_core, struct nes_vnic *nesvnic,
-			    struct sk_buff *skb)
+static void mini_cm_recv_pkt(struct nes_cm_core *cm_core,
+	struct nes_vnic *nesvnic, struct sk_buff *skb)
 {
 	struct nes_cm_node *cm_node = NULL;
 	struct nes_cm_listener *listener = NULL;
 	struct iphdr *iph;
 	struct tcphdr *tcph;
 	struct nes_cm_info nfo;
-	int ret = 0;
 
-	if (!skb || skb->len < sizeof(struct iphdr) + sizeof(struct tcphdr)) {
-		ret = -EINVAL;
-		goto out;
+	if (!skb)
+		return;
+	if (skb->len < sizeof(struct iphdr) + sizeof(struct tcphdr)) {
+		dev_kfree_skb_any(skb);
+		return;
 	}
 
 	iph = (struct iphdr *)skb->data;
 	tcph = (struct tcphdr *)(skb->data + sizeof(struct iphdr));
 	skb_reset_network_header(skb);
 	skb_set_transport_header(skb, sizeof(*tcph));
+	if (!tcph) {
+		dev_kfree_skb_any(skb);
+		return;
+	}
 	skb->len = ntohs(iph->tot_len);
 
 	nfo.loc_addr = ntohl(iph->daddr);
@@ -1853,61 +2059,60 @@ static int mini_cm_recv_pkt(struct nes_cm_core *cm_core, struct nes_vnic *nesvni
 		  NIPQUAD(iph->daddr), tcph->dest,
 		  NIPQUAD(iph->saddr), tcph->source);
 
-	/* note: this call is going to increment cm_node ref count */
-	cm_node = find_node(cm_core,
+	do {
+		cm_node = find_node(cm_core,
 			nfo.rem_port, nfo.rem_addr,
 			nfo.loc_port, nfo.loc_addr);
 
-	if (!cm_node) {
-		listener = find_listener(cm_core, nfo.loc_addr, nfo.loc_port,
-				NES_CM_LISTENER_ACTIVE_STATE);
-		if (listener) {
-			nfo.cm_id = listener->cm_id;
-			nfo.conn_type = listener->conn_type;
-		} else {
-			nfo.cm_id = NULL;
-			nfo.conn_type = 0;
-		}
-
-		cm_node = make_cm_node(cm_core, nesvnic, &nfo, listener);
 		if (!cm_node) {
-			nes_debug(NES_DBG_CM, "Unable to allocate node\n");
+			/* Only type of packet accepted are for */
+			/* the PASSIVE open (syn only) */
+			if ((!tcph->syn) || (tcph->ack)) {
+				cm_packets_dropped++;
+				break;
+			}
+			listener = find_listener(cm_core, nfo.loc_addr,
+				nfo.loc_port,
+				NES_CM_LISTENER_ACTIVE_STATE);
 			if (listener) {
-				nes_debug(NES_DBG_CM, "unable to allocate node and decrementing listener refcount\n");
+				nfo.cm_id = listener->cm_id;
+				nfo.conn_type = listener->conn_type;
+			} else {
+				nes_debug(NES_DBG_CM, "Unable to find listener "
+					"for the pkt\n");
+				cm_packets_dropped++;
+				dev_kfree_skb_any(skb);
+				break;
+			}
+
+			cm_node = make_cm_node(cm_core, nesvnic, &nfo,
+				listener);
+			if (!cm_node) {
+				nes_debug(NES_DBG_CM, "Unable to allocate "
+					"node\n");
+				cm_packets_dropped++;
 				atomic_dec(&listener->ref_count);
+				dev_kfree_skb_any(skb);
+				break;
 			}
-			ret = -1;
-			goto out;
-		}
-		if (!listener) {
-			nes_debug(NES_DBG_CM, "Packet found for unknown port %x refcnt=%d\n",
-					nfo.loc_port, atomic_read(&cm_node->ref_count));
-			if (!tcph->rst) {
-				nes_debug(NES_DBG_CM, "Packet found for unknown port=%d"
-						" rem_port=%d refcnt=%d\n",
-						nfo.loc_port, nfo.rem_port, atomic_read(&cm_node->ref_count));
-
-				cm_node->tcp_cntxt.rcv_nxt = ntohl(tcph->seq);
-				cm_node->tcp_cntxt.loc_seq_num = ntohl(tcph->ack_seq);
-				send_reset(cm_node);
+			if (!tcph->rst && !tcph->fin) {
+				cm_node->state = NES_CM_STATE_LISTENING;
+			} else {
+				cm_packets_dropped++;
+				rem_ref_cm_node(cm_core, cm_node);
+				dev_kfree_skb_any(skb);
+				break;
 			}
+			add_ref_cm_node(cm_node);
+		} else if (cm_node->state == NES_CM_STATE_TSA) {
 			rem_ref_cm_node(cm_core, cm_node);
-			ret = -1;
-			goto out;
+			atomic_inc(&cm_accel_dropped_pkts);
+			dev_kfree_skb_any(skb);
+			break;
 		}
-		add_ref_cm_node(cm_node);
-		cm_node->state = NES_CM_STATE_LISTENING;
-	}
-
-	nes_debug(NES_DBG_CM, "Processing Packet for node %p, data = (%p):\n",
-			cm_node, skb->data);
-	process_packet(cm_node, skb, cm_core);
-
-	rem_ref_cm_node(cm_core, cm_node);
-	out:
-	if (skb)
-		dev_kfree_skb_any(skb);
-	return ret;
+		process_packet(cm_node, skb, cm_core);
+		rem_ref_cm_node(cm_core, cm_node);
+	} while (0);
 }
 
 
@@ -2107,15 +2312,12 @@ int nes_cm_disconn(struct nes_qp *nesqp)
 	if (nesqp->disconn_pending == 0) {
 		nesqp->disconn_pending++;
 		spin_unlock_irqrestore(&nesqp->lock, flags);
-		/* nes_add_ref(&nesqp->ibqp); */
 		/* init our disconnect work element, to */
 		INIT_WORK(&nesqp->disconn_work, nes_disconnect_worker);
 
 		queue_work(g_cm_core->disconn_wq, &nesqp->disconn_work);
-	} else {
+	} else
 		spin_unlock_irqrestore(&nesqp->lock, flags);
-		nes_rem_ref(&nesqp->ibqp);
-	}
 
 	return 0;
 }
@@ -2161,7 +2363,6 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 		nes_debug(NES_DBG_CM, "QP%u disconnect_worker cmid is NULL\n",
 				nesqp->hwqp.qp_id);
 		spin_unlock_irqrestore(&nesqp->lock, flags);
-		nes_rem_ref(&nesqp->ibqp);
 		return -1;
 	}
 
@@ -2182,30 +2383,31 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			atomic_inc(&cm_disconnects);
 			cm_event.event = IW_CM_EVENT_DISCONNECT;
 			if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) {
-				issued_disconnect_reset = 1;
 				cm_event.status = IW_CM_EVENT_STATUS_RESET;
-				nes_debug(NES_DBG_CM, "Generating a CM Disconnect Event (status reset) for "
-						" QP%u, cm_id = %p. \n",
-						nesqp->hwqp.qp_id, cm_id);
-			} else {
+				nes_debug(NES_DBG_CM, "Generating a CM "
+					"Disconnect Event (status reset) for "
+					"QP%u, cm_id = %p. \n",
+					nesqp->hwqp.qp_id, cm_id);
+			} else
 				cm_event.status = IW_CM_EVENT_STATUS_OK;
-			}
 
 			cm_event.local_addr = cm_id->local_addr;
 			cm_event.remote_addr = cm_id->remote_addr;
 			cm_event.private_data = NULL;
 			cm_event.private_data_len = 0;
 
-			nes_debug(NES_DBG_CM, "Generating a CM Disconnect Event for "
-					" QP%u, SQ Head = %u, SQ Tail = %u. cm_id = %p, refcount = %u.\n",
-					nesqp->hwqp.qp_id,
-					nesqp->hwqp.sq_head, nesqp->hwqp.sq_tail, cm_id,
-					atomic_read(&nesqp->refcount));
+			nes_debug(NES_DBG_CM, "Generating a CM Disconnect Event"
+				" for  QP%u, SQ Head = %u, SQ Tail = %u. "
+				"cm_id = %p, refcount = %u.\n",
+				nesqp->hwqp.qp_id, nesqp->hwqp.sq_head,
+				nesqp->hwqp.sq_tail, cm_id,
+				atomic_read(&nesqp->refcount));
 
 			spin_unlock_irqrestore(&nesqp->lock, flags);
 			ret = cm_id->event_handler(cm_id, &cm_event);
 			if (ret)
-				nes_debug(NES_DBG_CM, "OFA CM event_handler returned, ret=%d\n", ret);
+				nes_debug(NES_DBG_CM, "OFA CM event_handler "
+					"returned, ret=%d\n", ret);
 			spin_lock_irqsave(&nesqp->lock, flags);
 		}
 
@@ -2247,31 +2449,24 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 			if (nesqp->flush_issued == 0) {
 				nesqp->flush_issued = 1;
 				spin_unlock_irqrestore(&nesqp->lock, flags);
-				flush_wqes(nesvnic->nesdev, nesqp, NES_CQP_FLUSH_RQ, 1);
-			} else {
+				flush_wqes(nesvnic->nesdev, nesqp,
+					NES_CQP_FLUSH_RQ, 1);
+			} else
 				spin_unlock_irqrestore(&nesqp->lock, flags);
-			}
-
-			/* This reference is from either ModifyQP or the AE processing,
-					there is still a race here with modifyqp */
-			nes_rem_ref(&nesqp->ibqp);
-
 		} else {
 			cm_id = nesqp->cm_id;
 			spin_unlock_irqrestore(&nesqp->lock, flags);
 			/* check to see if the inbound reset beat the outbound reset */
 			if ((!cm_id) && (last_ae==NES_AEQE_AEID_RESET_SENT)) {
-				nes_debug(NES_DBG_CM, "QP%u: Decing refcount due to inbound reset"
-						" beating the outbound reset.\n",
-						nesqp->hwqp.qp_id);
-				nes_rem_ref(&nesqp->ibqp);
+				nes_debug(NES_DBG_CM, "QP%u: Decing refcount "
+					"due to inbound reset beating the "
+					"outbound reset.\n", nesqp->hwqp.qp_id);
 			}
 		}
 	} else {
 		nesqp->disconn_pending = 0;
 		spin_unlock_irqrestore(&nesqp->lock, flags);
 	}
-	nes_rem_ref(&nesqp->ibqp);
 
 	return 0;
 }
@@ -2349,71 +2544,82 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	nesdev = nesvnic->nesdev;
 	adapter = nesdev->nesadapter;
 
-	nes_debug(NES_DBG_CM, "nesvnic=%p, netdev=%p, %s\n",
-			nesvnic, nesvnic->netdev, nesvnic->netdev->name);
-
-	/* since this is from a listen, we were able to put node handle into cm_id */
 	cm_node = (struct nes_cm_node *)cm_id->provider_data;
+	nes_debug(NES_DBG_CM, "nes_accept: cm_node= %p nesvnic=%p, netdev=%p,"
+		"%s\n", cm_node, nesvnic, nesvnic->netdev,
+		nesvnic->netdev->name);
 
 	/* associate the node with the QP */
 	nesqp->cm_node = (void *)cm_node;
+	cm_node->nesqp = nesqp;
+	nes_add_ref(&nesqp->ibqp);
 
-	nes_debug(NES_DBG_CM, "QP%u, cm_node=%p, jiffies = %lu\n",
-			nesqp->hwqp.qp_id, cm_node, jiffies);
+	nes_debug(NES_DBG_CM, "QP%u, cm_node=%p, jiffies = %lu listener = %p\n",
+		nesqp->hwqp.qp_id, cm_node, jiffies, cm_node->listener);
 	atomic_inc(&cm_accepts);
 
 	nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n",
 			atomic_read(&nesvnic->netdev->refcnt));
 
-		/* allocate the ietf frame and space for private data */
-		nesqp->ietf_frame = pci_alloc_consistent(nesdev->pcidev,
-				sizeof(struct ietf_mpa_frame) + conn_param->private_data_len,
-				&nesqp->ietf_frame_pbase);
-
-		if (!nesqp->ietf_frame) {
-			nes_debug(NES_DBG_CM, "Unable to allocate memory for private data\n");
-			return -ENOMEM;
-		}
+	/* allocate the ietf frame and space for private data */
+	nesqp->ietf_frame = pci_alloc_consistent(nesdev->pcidev,
+		sizeof(struct ietf_mpa_frame) + conn_param->private_data_len,
+		&nesqp->ietf_frame_pbase);
 
+	if (!nesqp->ietf_frame) {
+		nes_debug(NES_DBG_CM, "Unable to allocate memory for private "
+			"data\n");
+		return -ENOMEM;
+	}
 
-		/* setup the MPA frame */
-		nesqp->private_data_len = conn_param->private_data_len;
-		memcpy(nesqp->ietf_frame->key, IEFT_MPA_KEY_REP, IETF_MPA_KEY_SIZE);
 
-		memcpy(nesqp->ietf_frame->priv_data, conn_param->private_data,
-				conn_param->private_data_len);
+	/* setup the MPA frame */
+	nesqp->private_data_len = conn_param->private_data_len;
+	memcpy(nesqp->ietf_frame->key, IEFT_MPA_KEY_REP, IETF_MPA_KEY_SIZE);
 
-		nesqp->ietf_frame->priv_data_len = cpu_to_be16(conn_param->private_data_len);
-		nesqp->ietf_frame->rev = mpa_version;
-		nesqp->ietf_frame->flags = IETF_MPA_FLAGS_CRC;
+	memcpy(nesqp->ietf_frame->priv_data, conn_param->private_data,
+			conn_param->private_data_len);
 
-		/* setup our first outgoing iWarp send WQE (the IETF frame response) */
-		wqe = &nesqp->hwqp.sq_vbase[0];
+	nesqp->ietf_frame->priv_data_len =
+		cpu_to_be16(conn_param->private_data_len);
+	nesqp->ietf_frame->rev = mpa_version;
+	nesqp->ietf_frame->flags = IETF_MPA_FLAGS_CRC;
 
-		if (cm_id->remote_addr.sin_addr.s_addr != cm_id->local_addr.sin_addr.s_addr) {
-			u64temp = (unsigned long)nesqp;
-			u64temp |= NES_SW_CONTEXT_ALIGN>>1;
-			set_wqe_64bit_value(wqe->wqe_words, NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
-					    u64temp);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
-					cpu_to_le32(NES_IWARP_SQ_WQE_STREAMING | NES_IWARP_SQ_WQE_WRPDU);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
-					cpu_to_le32(conn_param->private_data_len + sizeof(struct ietf_mpa_frame));
-			wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] =
-					cpu_to_le32((u32)nesqp->ietf_frame_pbase);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] =
-					cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32));
-			wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
-					cpu_to_le32(conn_param->private_data_len + sizeof(struct ietf_mpa_frame));
-			wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
-
-			nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32(
-					NES_QPCONTEXT_ORDIRD_LSMM_PRESENT | NES_QPCONTEXT_ORDIRD_WRPDU);
-		} else {
-			nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32((NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
-					NES_QPCONTEXT_ORDIRD_WRPDU | NES_QPCONTEXT_ORDIRD_ALSMM));
-		}
-		nesqp->skip_lsmm = 1;
+	/* setup our first outgoing iWarp send WQE (the IETF frame response) */
+	wqe = &nesqp->hwqp.sq_vbase[0];
+
+	if (cm_id->remote_addr.sin_addr.s_addr !=
+			cm_id->local_addr.sin_addr.s_addr) {
+		u64temp = (unsigned long)nesqp;
+		u64temp |= NES_SW_CONTEXT_ALIGN>>1;
+		set_wqe_64bit_value(wqe->wqe_words,
+			NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
+			u64temp);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
+			cpu_to_le32(NES_IWARP_SQ_WQE_STREAMING |
+			NES_IWARP_SQ_WQE_WRPDU);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
+			cpu_to_le32(conn_param->private_data_len +
+			sizeof(struct ietf_mpa_frame));
+		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] =
+			cpu_to_le32((u32)nesqp->ietf_frame_pbase);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] =
+			cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32));
+		wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
+			cpu_to_le32(conn_param->private_data_len +
+			sizeof(struct ietf_mpa_frame));
+		wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+
+		nesqp->nesqp_context->ird_ord_sizes |=
+			cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
+			NES_QPCONTEXT_ORDIRD_WRPDU);
+	} else {
+		nesqp->nesqp_context->ird_ord_sizes |=
+			cpu_to_le32((NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
+			NES_QPCONTEXT_ORDIRD_WRPDU |
+			NES_QPCONTEXT_ORDIRD_ALSMM));
+	}
+	nesqp->skip_lsmm = 1;
 
 
 	/* Cache the cm_id in the qp */
@@ -2424,55 +2630,75 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	cm_id->provider_data = nesqp;
 	nesqp->active_conn   = 0;
 
+	if (cm_node->state == NES_CM_STATE_TSA)
+		nes_debug(NES_DBG_CM, "Already state = TSA for cm_node=%p\n",
+			cm_node);
+
 	nes_cm_init_tsa_conn(nesqp, cm_node);
 
-	nesqp->nesqp_context->tcpPorts[0] = cpu_to_le16(ntohs(cm_id->local_addr.sin_port));
-	nesqp->nesqp_context->tcpPorts[1] = cpu_to_le16(ntohs(cm_id->remote_addr.sin_port));
-	nesqp->nesqp_context->ip0 = cpu_to_le32(ntohl(cm_id->remote_addr.sin_addr.s_addr));
+	nesqp->nesqp_context->tcpPorts[0] =
+		cpu_to_le16(ntohs(cm_id->local_addr.sin_port));
+	nesqp->nesqp_context->tcpPorts[1] =
+		cpu_to_le16(ntohs(cm_id->remote_addr.sin_port));
+
+	if (ipv4_is_loopback(cm_id->remote_addr.sin_addr.s_addr))
+		nesqp->nesqp_context->ip0 =
+			cpu_to_le32(ntohl(nesvnic->local_ipaddr));
+	else
+		nesqp->nesqp_context->ip0 =
+			cpu_to_le32(ntohl(cm_id->remote_addr.sin_addr.s_addr));
 
 	nesqp->nesqp_context->misc2 |= cpu_to_le32(
-			(u32)PCI_FUNC(nesdev->pcidev->devfn) << NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
+			(u32)PCI_FUNC(nesdev->pcidev->devfn) <<
+			NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
 
-	nesqp->nesqp_context->arp_index_vlan |= cpu_to_le32(
-			nes_arp_table(nesdev, le32_to_cpu(nesqp->nesqp_context->ip0), NULL,
+	nesqp->nesqp_context->arp_index_vlan |=
+		cpu_to_le32(nes_arp_table(nesdev,
+			le32_to_cpu(nesqp->nesqp_context->ip0), NULL,
 			NES_ARP_RESOLVE) << 16);
 
 	nesqp->nesqp_context->ts_val_delta = cpu_to_le32(
-			jiffies - nes_read_indexed(nesdev, NES_IDX_TCP_NOW));
+		jiffies - nes_read_indexed(nesdev, NES_IDX_TCP_NOW));
 
 	nesqp->nesqp_context->ird_index = cpu_to_le32(nesqp->hwqp.qp_id);
 
 	nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32(
-			((u32)1 << NES_QPCONTEXT_ORDIRD_IWARP_MODE_SHIFT));
-	nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32((u32)conn_param->ord);
+		((u32)1 << NES_QPCONTEXT_ORDIRD_IWARP_MODE_SHIFT));
+	nesqp->nesqp_context->ird_ord_sizes |=
+		cpu_to_le32((u32)conn_param->ord);
 
 	memset(&nes_quad, 0, sizeof(nes_quad));
-	nes_quad.DstIpAdrIndex = cpu_to_le32((u32)PCI_FUNC(nesdev->pcidev->devfn) << 24);
-	nes_quad.SrcIpadr      = cm_id->remote_addr.sin_addr.s_addr;
-	nes_quad.TcpPorts[0]   = cm_id->remote_addr.sin_port;
-	nes_quad.TcpPorts[1]   = cm_id->local_addr.sin_port;
+	nes_quad.DstIpAdrIndex =
+		cpu_to_le32((u32)PCI_FUNC(nesdev->pcidev->devfn) << 24);
+	if (ipv4_is_loopback(cm_id->remote_addr.sin_addr.s_addr))
+		nes_quad.SrcIpadr = nesvnic->local_ipaddr;
+	else
+		nes_quad.SrcIpadr = cm_id->remote_addr.sin_addr.s_addr;
+	nes_quad.TcpPorts[0] = cm_id->remote_addr.sin_port;
+	nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port;
 
 	/* Produce hash key */
 	crc_value = get_crc_value(&nes_quad);
 	nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
 	nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, CRC = 0x%08X\n",
-			nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask);
+		nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask);
 
 	nesqp->hte_index &= adapter->hte_index_mask;
 	nesqp->nesqp_context->hte_index = cpu_to_le32(nesqp->hte_index);
 
 	cm_node->cm_core->api->accelerated(cm_node->cm_core, cm_node);
 
-	nes_debug(NES_DBG_CM, "QP%u, Destination IP = 0x%08X:0x%04X, local = 0x%08X:0x%04X,"
-			" rcv_nxt=0x%08X, snd_nxt=0x%08X, mpa + private data length=%zu.\n",
-			nesqp->hwqp.qp_id,
+	nes_debug(NES_DBG_CM, "QP%u, Destination IP = 0x%08X:0x%04X, local = "
+			"0x%08X:0x%04X, rcv_nxt=0x%08X, snd_nxt=0x%08X, mpa + "
+			"private data length=%zu.\n", nesqp->hwqp.qp_id,
 			ntohl(cm_id->remote_addr.sin_addr.s_addr),
 			ntohs(cm_id->remote_addr.sin_port),
 			ntohl(cm_id->local_addr.sin_addr.s_addr),
 			ntohs(cm_id->local_addr.sin_port),
 			le32_to_cpu(nesqp->nesqp_context->rcv_nxt),
 			le32_to_cpu(nesqp->nesqp_context->snd_nxt),
-			conn_param->private_data_len+sizeof(struct ietf_mpa_frame));
+			conn_param->private_data_len +
+			sizeof(struct ietf_mpa_frame));
 
 	attr.qp_state = IB_QPS_RTS;
 	nes_modify_qp(&nesqp->ibqp, &attr, IB_QP_STATE, NULL);
@@ -2489,15 +2715,16 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	cm_event.private_data_len = 0;
 	ret = cm_id->event_handler(cm_id, &cm_event);
 	if (cm_node->loopbackpartner) {
-		cm_node->loopbackpartner->mpa_frame_size = nesqp->private_data_len;
+		cm_node->loopbackpartner->mpa_frame_size =
+			nesqp->private_data_len;
 		/* copy entire MPA frame to our cm_node's frame */
-		memcpy(cm_node->loopbackpartner->mpa_frame_buf, nesqp->ietf_frame->priv_data,
-			   nesqp->private_data_len);
+		memcpy(cm_node->loopbackpartner->mpa_frame_buf,
+			nesqp->ietf_frame->priv_data, nesqp->private_data_len);
 		create_event(cm_node->loopbackpartner, NES_CM_EVENT_CONNECTED);
 	}
 	if (ret)
-		printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
-				__func__, __LINE__, ret);
+		printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
+			"ret=%d\n", __func__, __LINE__, ret);
 
 	return 0;
 }
@@ -2555,74 +2782,61 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	if (!nesdev)
 		return -EINVAL;
 
-	atomic_inc(&cm_connects);
-
-	nesqp->ietf_frame = kzalloc(sizeof(struct ietf_mpa_frame) +
-			conn_param->private_data_len, GFP_KERNEL);
-	if (!nesqp->ietf_frame)
-		return -ENOMEM;
+	nes_debug(NES_DBG_CM, "QP%u, current IP = 0x%08X, Destination IP = "
+		"0x%08X:0x%04X, local = 0x%08X:0x%04X.\n", nesqp->hwqp.qp_id,
+		ntohl(nesvnic->local_ipaddr),
+		ntohl(cm_id->remote_addr.sin_addr.s_addr),
+		ntohs(cm_id->remote_addr.sin_port),
+		ntohl(cm_id->local_addr.sin_addr.s_addr),
+		ntohs(cm_id->local_addr.sin_port));
 
-	/* set qp as having an active connection */
+	atomic_inc(&cm_connects);
 	nesqp->active_conn = 1;
 
-	nes_debug(NES_DBG_CM, "QP%u, Destination IP = 0x%08X:0x%04X, local = 0x%08X:0x%04X.\n",
-			nesqp->hwqp.qp_id,
-			ntohl(cm_id->remote_addr.sin_addr.s_addr),
-			ntohs(cm_id->remote_addr.sin_port),
-			ntohl(cm_id->local_addr.sin_addr.s_addr),
-			ntohs(cm_id->local_addr.sin_port));
-
 	/* cache the cm_id in the qp */
 	nesqp->cm_id = cm_id;
 
 	cm_id->provider_data = nesqp;
 
-	/* copy the private data */
-	if (conn_param->private_data_len) {
-		memcpy(nesqp->ietf_frame->priv_data, conn_param->private_data,
-				conn_param->private_data_len);
-	}
-
 	nesqp->private_data_len = conn_param->private_data_len;
 	nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32((u32)conn_param->ord);
 	nes_debug(NES_DBG_CM, "requested ord = 0x%08X.\n", (u32)conn_param->ord);
-	nes_debug(NES_DBG_CM, "mpa private data len =%u\n", conn_param->private_data_len);
-
-	strcpy(&nesqp->ietf_frame->key[0], IEFT_MPA_KEY_REQ);
-	nesqp->ietf_frame->flags = IETF_MPA_FLAGS_CRC;
-	nesqp->ietf_frame->rev = IETF_MPA_VERSION;
-	nesqp->ietf_frame->priv_data_len = htons(conn_param->private_data_len);
+	nes_debug(NES_DBG_CM, "mpa private data len =%u\n",
+		conn_param->private_data_len);
 
-	if (cm_id->local_addr.sin_addr.s_addr != cm_id->remote_addr.sin_addr.s_addr)
+	if (cm_id->local_addr.sin_addr.s_addr !=
+		cm_id->remote_addr.sin_addr.s_addr)
 		nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
-				PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
+			PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
 
 	/* set up the connection params for the node */
-	cm_info.loc_addr = (cm_id->local_addr.sin_addr.s_addr);
-	cm_info.loc_port = (cm_id->local_addr.sin_port);
-	cm_info.rem_addr = (cm_id->remote_addr.sin_addr.s_addr);
-	cm_info.rem_port = (cm_id->remote_addr.sin_port);
+	cm_info.loc_addr = htonl(cm_id->local_addr.sin_addr.s_addr);
+	cm_info.loc_port = htons(cm_id->local_addr.sin_port);
+	cm_info.rem_addr = htonl(cm_id->remote_addr.sin_addr.s_addr);
+	cm_info.rem_port = htons(cm_id->remote_addr.sin_port);
 	cm_info.cm_id = cm_id;
 	cm_info.conn_type = NES_CM_IWARP_CONN_TYPE;
 
 	cm_id->add_ref(cm_id);
-	nes_add_ref(&nesqp->ibqp);
 
 	/* create a connect CM node connection */
-	cm_node = g_cm_core->api->connect(g_cm_core, nesvnic, nesqp->ietf_frame, &cm_info);
+	cm_node = g_cm_core->api->connect(g_cm_core, nesvnic,
+		conn_param->private_data_len, (void *)conn_param->private_data,
+		&cm_info);
 	if (!cm_node) {
-		if (cm_id->local_addr.sin_addr.s_addr != cm_id->remote_addr.sin_addr.s_addr)
+		if (cm_id->local_addr.sin_addr.s_addr !=
+				cm_id->remote_addr.sin_addr.s_addr)
 			nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
-					PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_DEL);
-		nes_rem_ref(&nesqp->ibqp);
-		kfree(nesqp->ietf_frame);
-		nesqp->ietf_frame = NULL;
+				PCI_FUNC(nesdev->pcidev->devfn),
+				NES_MANAGE_APBVT_DEL);
+
 		cm_id->rem_ref(cm_id);
 		return -ENOMEM;
 	}
 
 	cm_node->apbvt_set = 1;
 	nesqp->cm_node = cm_node;
+	cm_node->nesqp = nesqp;
 
 	return 0;
 }
@@ -2664,7 +2878,7 @@ int nes_create_listen(struct iw_cm_id *cm_id, int backlog)
 
 	cm_node = g_cm_core->api->listen(g_cm_core, nesvnic, &cm_info);
 	if (!cm_node) {
-		printk("%s[%u] Error returned from listen API call\n",
+		printk(KERN_ERR "%s[%u] Error returned from listen API call\n",
 				__func__, __LINE__);
 		return -ENOMEM;
 	}
@@ -2672,10 +2886,13 @@ int nes_create_listen(struct iw_cm_id *cm_id, int backlog)
 	cm_id->provider_data = cm_node;
 
 	if (!cm_node->reused_node) {
-		err = nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
-				PCI_FUNC(nesvnic->nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
+		err = nes_manage_apbvt(nesvnic,
+			ntohs(cm_id->local_addr.sin_port),
+			PCI_FUNC(nesvnic->nesdev->pcidev->devfn),
+			NES_MANAGE_APBVT_ADD);
 		if (err) {
-			printk("nes_manage_apbvt call returned %d.\n", err);
+			printk(KERN_ERR "nes_manage_apbvt call returned %d.\n",
+				err);
 			g_cm_core->api->stop_listener(g_cm_core, (void *)cm_node);
 			return err;
 		}
@@ -2795,53 +3012,70 @@ static void cm_event_connected(struct nes_cm_event *event)
 	nes_cm_init_tsa_conn(nesqp, cm_node);
 
 	/* set the QP tsa context */
-	nesqp->nesqp_context->tcpPorts[0] = cpu_to_le16(ntohs(cm_id->local_addr.sin_port));
-	nesqp->nesqp_context->tcpPorts[1] = cpu_to_le16(ntohs(cm_id->remote_addr.sin_port));
-	nesqp->nesqp_context->ip0 = cpu_to_le32(ntohl(cm_id->remote_addr.sin_addr.s_addr));
+	nesqp->nesqp_context->tcpPorts[0] =
+		cpu_to_le16(ntohs(cm_id->local_addr.sin_port));
+	nesqp->nesqp_context->tcpPorts[1] =
+		cpu_to_le16(ntohs(cm_id->remote_addr.sin_port));
+	if (ipv4_is_loopback(cm_id->remote_addr.sin_addr.s_addr))
+		nesqp->nesqp_context->ip0 =
+			cpu_to_le32(ntohl(nesvnic->local_ipaddr));
+	else
+		nesqp->nesqp_context->ip0 =
+			cpu_to_le32(ntohl(cm_id->remote_addr.sin_addr.s_addr));
 
 	nesqp->nesqp_context->misc2 |= cpu_to_le32(
-			(u32)PCI_FUNC(nesdev->pcidev->devfn) << NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
+			(u32)PCI_FUNC(nesdev->pcidev->devfn) <<
+			NES_QPCONTEXT_MISC2_SRC_IP_SHIFT);
 	nesqp->nesqp_context->arp_index_vlan |= cpu_to_le32(
-			nes_arp_table(nesdev, le32_to_cpu(nesqp->nesqp_context->ip0),
+			nes_arp_table(nesdev,
+			le32_to_cpu(nesqp->nesqp_context->ip0),
 			NULL, NES_ARP_RESOLVE) << 16);
 	nesqp->nesqp_context->ts_val_delta = cpu_to_le32(
 			jiffies - nes_read_indexed(nesdev, NES_IDX_TCP_NOW));
 	nesqp->nesqp_context->ird_index = cpu_to_le32(nesqp->hwqp.qp_id);
 	nesqp->nesqp_context->ird_ord_sizes |=
-			cpu_to_le32((u32)1 << NES_QPCONTEXT_ORDIRD_IWARP_MODE_SHIFT);
+			cpu_to_le32((u32)1 <<
+			NES_QPCONTEXT_ORDIRD_IWARP_MODE_SHIFT);
 
 	/* Adjust tail for not having a LSMM */
 	nesqp->hwqp.sq_tail = 1;
 
 #if defined(NES_SEND_FIRST_WRITE)
-		if (cm_node->send_write0) {
-			nes_debug(NES_DBG_CM, "Sending first write.\n");
-			wqe = &nesqp->hwqp.sq_vbase[0];
-			u64temp = (unsigned long)nesqp;
-			u64temp |= NES_SW_CONTEXT_ALIGN>>1;
-			set_wqe_64bit_value(wqe->wqe_words, NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
-					    u64temp);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] = cpu_to_le32(NES_IWARP_SQ_OP_RDMAW);
-			wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] = 0;
-			wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] = 0;
-			wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] = 0;
-			wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] = 0;
-			wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
-
-			/* use the reserved spot on the WQ for the extra first WQE */
-			nesqp->nesqp_context->ird_ord_sizes &= cpu_to_le32(~(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
-					NES_QPCONTEXT_ORDIRD_WRPDU | NES_QPCONTEXT_ORDIRD_ALSMM));
-			nesqp->skip_lsmm = 1;
-			nesqp->hwqp.sq_tail = 0;
-			nes_write32(nesdev->regs + NES_WQE_ALLOC,
-					(1 << 24) | 0x00800000 | nesqp->hwqp.qp_id);
-		}
+	if (cm_node->send_write0) {
+		nes_debug(NES_DBG_CM, "Sending first write.\n");
+		wqe = &nesqp->hwqp.sq_vbase[0];
+		u64temp = (unsigned long)nesqp;
+		u64temp |= NES_SW_CONTEXT_ALIGN>>1;
+		set_wqe_64bit_value(wqe->wqe_words,
+				NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX, u64temp);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_MISC_IDX] =
+			cpu_to_le32(NES_IWARP_SQ_OP_RDMAW);
+		wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+
+		/* use the reserved spot on the WQ for the extra first WQE */
+		nesqp->nesqp_context->ird_ord_sizes &=
+			cpu_to_le32(~(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
+						NES_QPCONTEXT_ORDIRD_WRPDU |
+						NES_QPCONTEXT_ORDIRD_ALSMM));
+		nesqp->skip_lsmm = 1;
+		nesqp->hwqp.sq_tail = 0;
+		nes_write32(nesdev->regs + NES_WQE_ALLOC,
+				(1 << 24) | 0x00800000 | nesqp->hwqp.qp_id);
+	}
 #endif
 
 	memset(&nes_quad, 0, sizeof(nes_quad));
 
-	nes_quad.DstIpAdrIndex = cpu_to_le32((u32)PCI_FUNC(nesdev->pcidev->devfn) << 24);
-	nes_quad.SrcIpadr = cm_id->remote_addr.sin_addr.s_addr;
+	nes_quad.DstIpAdrIndex =
+		cpu_to_le32((u32)PCI_FUNC(nesdev->pcidev->devfn) << 24);
+	if (ipv4_is_loopback(cm_id->remote_addr.sin_addr.s_addr))
+		nes_quad.SrcIpadr = nesvnic->local_ipaddr;
+	else
+		nes_quad.SrcIpadr = cm_id->remote_addr.sin_addr.s_addr;
 	nes_quad.TcpPorts[0] = cm_id->remote_addr.sin_port;
 	nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port;
 
@@ -2858,10 +3092,6 @@ static void cm_event_connected(struct nes_cm_event *event)
 	nesqp->private_data_len = (u8) cm_node->mpa_frame_size;
 	cm_node->cm_core->api->accelerated(cm_node->cm_core, cm_node);
 
-	/* modify QP state to rts */
-	attr.qp_state = IB_QPS_RTS;
-	nes_modify_qp(&nesqp->ibqp, &attr, IB_QP_STATE, NULL);
-
 	/* notify OF layer we successfully created the requested connection */
 	cm_event.event = IW_CM_EVENT_CONNECT_REPLY;
 	cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
@@ -2870,20 +3100,21 @@ static void cm_event_connected(struct nes_cm_event *event)
 	cm_event.local_addr.sin_port = cm_id->local_addr.sin_port;
 	cm_event.remote_addr = cm_id->remote_addr;
 
-		cm_event.private_data = (void *)event->cm_node->mpa_frame_buf;
-		cm_event.private_data_len = (u8) event->cm_node->mpa_frame_size;
+	cm_event.private_data = (void *)event->cm_node->mpa_frame_buf;
+	cm_event.private_data_len = (u8) event->cm_node->mpa_frame_size;
 
 	cm_event.local_addr.sin_addr.s_addr = event->cm_info.rem_addr;
 	ret = cm_id->event_handler(cm_id, &cm_event);
 	nes_debug(NES_DBG_CM, "OFA CM event_handler returned, ret=%d\n", ret);
 
 	if (ret)
-		printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
-				__func__, __LINE__, ret);
-	nes_debug(NES_DBG_CM, "Exiting connect thread for QP%u. jiffies = %lu\n",
-			nesqp->hwqp.qp_id, jiffies );
+		printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
+			"ret=%d\n", __func__, __LINE__, ret);
+	attr.qp_state = IB_QPS_RTS;
+	nes_modify_qp(&nesqp->ibqp, &attr, IB_QP_STATE, NULL);
 
-	nes_rem_ref(&nesqp->ibqp);
+	nes_debug(NES_DBG_CM, "Exiting connect thread for QP%u. jiffies = "
+		"%lu\n", nesqp->hwqp.qp_id, jiffies);
 
 	return;
 }
@@ -2927,17 +3158,19 @@ static void cm_event_connect_error(struct nes_cm_event *event)
 	cm_event.private_data = NULL;
 	cm_event.private_data_len = 0;
 
-	nes_debug(NES_DBG_CM, "call CM_EVENT REJECTED, local_addr=%08x, remove_addr=%08x\n",
-			cm_event.local_addr.sin_addr.s_addr, cm_event.remote_addr.sin_addr.s_addr);
+	nes_debug(NES_DBG_CM, "call CM_EVENT REJECTED, local_addr=%08x, "
+		"remove_addr=%08x\n", cm_event.local_addr.sin_addr.s_addr,
+		cm_event.remote_addr.sin_addr.s_addr);
 
 	ret = cm_id->event_handler(cm_id, &cm_event);
 	nes_debug(NES_DBG_CM, "OFA CM event_handler returned, ret=%d\n", ret);
 	if (ret)
-		printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
-				__func__, __LINE__, ret);
+		printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
+			"ret=%d\n", __func__, __LINE__, ret);
 	nes_rem_ref(&nesqp->ibqp);
-		cm_id->rem_ref(cm_id);
+	cm_id->rem_ref(cm_id);
 
+	rem_ref_cm_node(event->cm_node->cm_core, event->cm_node);
 	return;
 }
 
@@ -3040,7 +3273,8 @@ static int nes_cm_post_event(struct nes_cm_event *event)
 	add_ref_cm_node(event->cm_node);
 	event->cm_info.cm_id->add_ref(event->cm_info.cm_id);
 	INIT_WORK(&event->event_work, nes_cm_event_handler);
-	nes_debug(NES_DBG_CM, "queue_work, event=%p\n", event);
+	nes_debug(NES_DBG_CM, "cm_node=%p queue_work, event=%p\n",
+		event->cm_node, event);
 
 	queue_work(event->cm_node->cm_core->event_wq, &event->event_work);
 
@@ -3056,46 +3290,48 @@ static int nes_cm_post_event(struct nes_cm_event *event)
  */
 static void nes_cm_event_handler(struct work_struct *work)
 {
-	struct nes_cm_event *event = container_of(work, struct nes_cm_event, event_work);
+	struct nes_cm_event *event = container_of(work, struct nes_cm_event,
+			event_work);
 	struct nes_cm_core *cm_core;
 
-	if ((!event) || (!event->cm_node) || (!event->cm_node->cm_core)) {
+	if ((!event) || (!event->cm_node) || (!event->cm_node->cm_core))
 		return;
-	}
+
 	cm_core = event->cm_node->cm_core;
 	nes_debug(NES_DBG_CM, "event=%p, event->type=%u, events posted=%u\n",
-			event, event->type, atomic_read(&cm_core->events_posted));
+		event, event->type, atomic_read(&cm_core->events_posted));
 
 	switch (event->type) {
-		case NES_CM_EVENT_MPA_REQ:
-			cm_event_mpa_req(event);
-			nes_debug(NES_DBG_CM, "CM Event: MPA REQUEST\n");
-			break;
-		case NES_CM_EVENT_RESET:
-			nes_debug(NES_DBG_CM, "CM Event: RESET\n");
-			cm_event_reset(event);
-			break;
-		case NES_CM_EVENT_CONNECTED:
-			if ((!event->cm_node->cm_id) ||
-				(event->cm_node->state != NES_CM_STATE_TSA)) {
-				break;
-			}
-			cm_event_connected(event);
-			nes_debug(NES_DBG_CM, "CM Event: CONNECTED\n");
+	case NES_CM_EVENT_MPA_REQ:
+		cm_event_mpa_req(event);
+		nes_debug(NES_DBG_CM, "cm_node=%p CM Event: MPA REQUEST\n",
+			event->cm_node);
+		break;
+	case NES_CM_EVENT_RESET:
+		nes_debug(NES_DBG_CM, "cm_node = %p CM Event: RESET\n",
+			event->cm_node);
+		cm_event_reset(event);
+		break;
+	case NES_CM_EVENT_CONNECTED:
+		if ((!event->cm_node->cm_id) ||
+			(event->cm_node->state != NES_CM_STATE_TSA))
 			break;
-		case NES_CM_EVENT_ABORTED:
-			if ((!event->cm_node->cm_id) || (event->cm_node->state == NES_CM_STATE_TSA)) {
-				break;
-			}
-			cm_event_connect_error(event);
-			nes_debug(NES_DBG_CM, "CM Event: ABORTED\n");
-			break;
-		case NES_CM_EVENT_DROPPED_PKT:
-			nes_debug(NES_DBG_CM, "CM Event: DROPPED PKT\n");
-			break;
-		default:
-			nes_debug(NES_DBG_CM, "CM Event: UNKNOWN EVENT TYPE\n");
+		cm_event_connected(event);
+		nes_debug(NES_DBG_CM, "CM Event: CONNECTED\n");
+		break;
+	case NES_CM_EVENT_ABORTED:
+		if ((!event->cm_node->cm_id) ||
+			(event->cm_node->state == NES_CM_STATE_TSA))
 			break;
+		cm_event_connect_error(event);
+		nes_debug(NES_DBG_CM, "CM Event: ABORTED\n");
+		break;
+	case NES_CM_EVENT_DROPPED_PKT:
+		nes_debug(NES_DBG_CM, "CM Event: DROPPED PKT\n");
+		break;
+	default:
+		nes_debug(NES_DBG_CM, "CM Event: UNKNOWN EVENT TYPE\n");
+		break;
 	}
 
 	atomic_dec(&cm_core->events_posted);
diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h
index 7717cb2ab50..367b3d29014 100644
--- a/drivers/infiniband/hw/nes/nes_cm.h
+++ b/drivers/infiniband/hw/nes/nes_cm.h
@@ -83,6 +83,8 @@ enum nes_timer_type {
 #define SET_FIN 4
 #define SET_RST 8
 
+#define TCP_OPTIONS_PADDING	3
+
 struct option_base {
 	u8 optionnum;
 	u8 length;
@@ -177,6 +179,7 @@ enum nes_cm_node_state {
 	NES_CM_STATE_ESTABLISHED,
 	NES_CM_STATE_ACCEPTING,
 	NES_CM_STATE_MPAREQ_SENT,
+	NES_CM_STATE_MPAREQ_RCVD,
 	NES_CM_STATE_TSA,
 	NES_CM_STATE_FIN_WAIT1,
 	NES_CM_STATE_FIN_WAIT2,
@@ -187,6 +190,16 @@ enum nes_cm_node_state {
 	NES_CM_STATE_CLOSED
 };
 
+enum nes_tcpip_pkt_type {
+	NES_PKT_TYPE_UNKNOWN,
+	NES_PKT_TYPE_SYN,
+	NES_PKT_TYPE_SYNACK,
+	NES_PKT_TYPE_ACK,
+	NES_PKT_TYPE_FIN,
+	NES_PKT_TYPE_RST
+};
+
+
 /* type of nes connection */
 enum nes_cm_conn_type {
 	NES_CM_IWARP_CONN_TYPE,
@@ -257,7 +270,9 @@ struct nes_cm_node {
 	struct net_device         *netdev;
 
 	struct nes_cm_node        *loopbackpartner;
-	struct list_head          retrans_list;
+
+	struct nes_timer_entry	*send_entry;
+
 	spinlock_t                retrans_list_lock;
 	struct list_head          recv_list;
 	spinlock_t                recv_list_lock;
@@ -276,6 +291,8 @@ struct nes_cm_node {
 	struct nes_vnic           *nesvnic;
 	int                       apbvt_set;
 	int                       accept_pend;
+	int			freed;
+	struct nes_qp		*nesqp;
 };
 
 /* structure for client or CM to fill when making CM api calls. */
@@ -366,14 +383,14 @@ struct nes_cm_ops {
 			struct nes_cm_info *);
 	int (*stop_listener)(struct nes_cm_core *, struct nes_cm_listener *);
 	struct nes_cm_node * (*connect)(struct nes_cm_core *,
-			struct nes_vnic *, struct ietf_mpa_frame *,
+			struct nes_vnic *, u16, void *,
 			struct nes_cm_info *);
 	int (*close)(struct nes_cm_core *, struct nes_cm_node *);
 	int (*accept)(struct nes_cm_core *, struct ietf_mpa_frame *,
 			struct nes_cm_node *);
 	int (*reject)(struct nes_cm_core *, struct ietf_mpa_frame *,
 			struct nes_cm_node *);
-	int (*recv_pkt)(struct nes_cm_core *, struct nes_vnic *,
+	void (*recv_pkt)(struct nes_cm_core *, struct nes_vnic *,
 			struct sk_buff *);
 	int (*destroy_cm_core)(struct nes_cm_core *);
 	int (*get)(struct nes_cm_core *);
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 85f26d19a32..1513d4066f1 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -2814,7 +2814,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 			nesqp = *((struct nes_qp **)&context);
 			if (atomic_inc_return(&nesqp->close_timer_started) == 1) {
 				nesqp->cm_id->add_ref(nesqp->cm_id);
-				nes_add_ref(&nesqp->ibqp);
 				schedule_nes_timer(nesqp->cm_node, (struct sk_buff *)nesqp,
 						NES_TIMER_TYPE_CLOSE, 1, 0);
 				nes_debug(NES_DBG_AEQ, "QP%u Not decrementing QP refcount (%d),"
@@ -2838,7 +2837,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 			if (async_event_id == NES_AEQE_AEID_RESET_SENT) {
 				tcp_state = NES_AEQE_TCP_STATE_CLOSED;
 			}
-			nes_add_ref(&nesqp->ibqp);
 			spin_lock_irqsave(&nesqp->lock, flags);
 			nesqp->hw_iwarp_state = iwarp_state;
 			nesqp->hw_tcp_state = tcp_state;
@@ -2876,7 +2874,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 				}
 				spin_unlock_irqrestore(&nesqp->lock, flags);
 				if (next_iwarp_state) {
-					nes_add_ref(&nesqp->ibqp);
 					nes_debug(NES_DBG_AEQ, "issuing hw modifyqp for QP%u. next state = 0x%08X,"
 							" also added another reference\n",
 							nesqp->hwqp.qp_id, next_iwarp_state);
@@ -2888,7 +2885,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 					/* FIN Received but ib state not RTS,
 							close complete will be on its way */
 					spin_unlock_irqrestore(&nesqp->lock, flags);
-					nes_rem_ref(&nesqp->ibqp);
 					return;
 				}
 				spin_unlock_irqrestore(&nesqp->lock, flags);
@@ -2922,7 +2918,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 			if ((tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) ||
 					((nesqp->ibqp_state == IB_QPS_RTS)&&
 					(async_event_id == NES_AEQE_AEID_LLP_CONNECTION_RESET))) {
-				nes_add_ref(&nesqp->ibqp);
 				nes_cm_disconn(nesqp);
 			} else {
 				nesqp->in_disconnect = 0;
@@ -2931,7 +2926,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 			break;
 		case NES_AEQE_AEID_LLP_TOO_MANY_RETRIES:
 			nesqp = *((struct nes_qp **)&context);
-			nes_add_ref(&nesqp->ibqp);
 			spin_lock_irqsave(&nesqp->lock, flags);
 			nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_ERROR;
 			nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
@@ -3042,7 +3036,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 				nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
 			}
 			/* tell cm to disconnect, cm will queue work to thread */
-			nes_add_ref(&nesqp->ibqp);
 			nes_cm_disconn(nesqp);
 			break;
 		case NES_AEQE_AEID_DDP_UBE_INVALID_MSN_NO_BUFFER_AVAILABLE:
@@ -3062,7 +3055,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 				nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
 			}
 			/* tell cm to disconnect, cm will queue work to thread */
-			nes_add_ref(&nesqp->ibqp);
 			nes_cm_disconn(nesqp);
 			break;
 		case NES_AEQE_AEID_LLP_RECEIVED_MPA_CRC_ERROR:
@@ -3082,7 +3074,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 				nesqp->ibqp.event_handler(&ibevent, nesqp->ibqp.qp_context);
 			}
 			/* tell cm to disconnect, cm will queue work to thread */
-			nes_add_ref(&nesqp->ibqp);
 			nes_cm_disconn(nesqp);
 			break;
 			/* TODO: additional AEs need to be here */
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index e3939d13484..d79942e8497 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -2867,7 +2867,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 			nesqp->hwqp.qp_id, attr->qp_state, nesqp->ibqp_state,
 			nesqp->iwarp_state, atomic_read(&nesqp->refcount));
 
-	nes_add_ref(&nesqp->ibqp);
 	spin_lock_irqsave(&nesqp->lock, qplockflags);
 
 	nes_debug(NES_DBG_MOD_QP, "QP%u: hw_iwarp_state=0x%X, hw_tcp_state=0x%X,"
@@ -2882,7 +2881,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id);
 				if (nesqp->iwarp_state > (u32)NES_CQP_QP_IWARP_STATE_IDLE) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				next_iwarp_state = NES_CQP_QP_IWARP_STATE_IDLE;
@@ -2893,7 +2891,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id);
 				if (nesqp->iwarp_state>(u32)NES_CQP_QP_IWARP_STATE_IDLE) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				next_iwarp_state = NES_CQP_QP_IWARP_STATE_IDLE;
@@ -2904,14 +2901,12 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id);
 				if (nesqp->iwarp_state>(u32)NES_CQP_QP_IWARP_STATE_RTS) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				if (nesqp->cm_id == NULL) {
 					nes_debug(NES_DBG_MOD_QP, "QP%u: Failing attempt to move QP to RTS without a CM_ID. \n",
 							nesqp->hwqp.qp_id );
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				next_iwarp_state = NES_CQP_QP_IWARP_STATE_RTS;
@@ -2929,7 +2924,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id, nesqp->hwqp.sq_head, nesqp->hwqp.sq_tail);
 				if (nesqp->iwarp_state == (u32)NES_CQP_QP_IWARP_STATE_CLOSING) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return 0;
 				} else {
 					if (nesqp->iwarp_state > (u32)NES_CQP_QP_IWARP_STATE_CLOSING) {
@@ -2937,7 +2931,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 								" ignored due to current iWARP state\n",
 								nesqp->hwqp.qp_id);
 						spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-						nes_rem_ref(&nesqp->ibqp);
 						return -EINVAL;
 					}
 					if (nesqp->hw_iwarp_state != NES_AEQE_IWARP_STATE_RTS) {
@@ -2969,7 +2962,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hwqp.qp_id);
 				if (nesqp->iwarp_state>=(u32)NES_CQP_QP_IWARP_STATE_TERMINATE) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				/* next_iwarp_state = (NES_CQP_QP_IWARP_STATE_TERMINATE | 0x02000000); */
@@ -2982,7 +2974,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 			case IB_QPS_RESET:
 				if (nesqp->iwarp_state == (u32)NES_CQP_QP_IWARP_STATE_ERROR) {
 					spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-					nes_rem_ref(&nesqp->ibqp);
 					return -EINVAL;
 				}
 				nes_debug(NES_DBG_MOD_QP, "QP%u: new state = error\n",
@@ -3008,7 +2999,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 				break;
 			default:
 				spin_unlock_irqrestore(&nesqp->lock, qplockflags);
-				nes_rem_ref(&nesqp->ibqp);
 				return -EINVAL;
 				break;
 		}
@@ -3088,7 +3078,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 							nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount),
 							original_last_aeq, nesqp->last_aeq);
 					/* this one is for the cm_disconnect thread */
-					nes_add_ref(&nesqp->ibqp);
 					spin_lock_irqsave(&nesqp->lock, qplockflags);
 					nesqp->hw_tcp_state = NES_AEQE_TCP_STATE_CLOSED;
 					nesqp->last_aeq = NES_AEQE_AEID_RESET_SENT;
@@ -3097,14 +3086,12 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 				} else {
 					nes_debug(NES_DBG_MOD_QP, "QP%u No fake disconnect, QP refcount=%d\n",
 							nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount));
-					nes_rem_ref(&nesqp->ibqp);
 				}
 			} else {
 				spin_lock_irqsave(&nesqp->lock, qplockflags);
 				if (nesqp->cm_id) {
 					/* These two are for the timer thread */
 					if (atomic_inc_return(&nesqp->close_timer_started) == 1) {
-						nes_add_ref(&nesqp->ibqp);
 						nesqp->cm_id->add_ref(nesqp->cm_id);
 						nes_debug(NES_DBG_MOD_QP, "QP%u Not decrementing QP refcount (%d),"
 								" need ae to finish up, original_last_aeq = 0x%04X."
@@ -3128,14 +3115,12 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 					" original_last_aeq = 0x%04X. last_aeq = 0x%04X.\n",
 					nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount),
 					original_last_aeq, nesqp->last_aeq);
-			nes_rem_ref(&nesqp->ibqp);
 		}
 	} else {
 		nes_debug(NES_DBG_MOD_QP, "QP%u Decrementing QP refcount (%d), No ae to finish up,"
 				" original_last_aeq = 0x%04X. last_aeq = 0x%04X.\n",
 				nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount),
 				original_last_aeq, nesqp->last_aeq);
-		nes_rem_ref(&nesqp->ibqp);
 	}
 
 	err = 0;
-- 
cgit v1.2.3


From 483fad1c3fa1060d7e6710e84a065ad514571739 Mon Sep 17 00:00:00 2001
From: Nathan Lynch <ntl@pobox.com>
Date: Tue, 22 Jul 2008 04:48:46 +1000
Subject: ELF loader support for auxvec base platform string

Some IBM POWER-based platforms have the ability to run in a
mode which mostly appears to the OS as a different processor from the
actual hardware.  For example, a Power6 system may appear to be a
Power5+, which makes the AT_PLATFORM value "power5+".  This means that
programs are restricted to the ISA supported by Power5+;
Power6-specific instructions are treated as illegal.

However, some applications (virtual machines, optimized libraries) can
benefit from knowledge of the underlying CPU model.  A new aux vector
entry, AT_BASE_PLATFORM, will denote the actual hardware.  For
example, on a Power6 system in Power5+ compatibility mode, AT_PLATFORM
will be "power5+" and AT_BASE_PLATFORM will be "power6".  The idea is
that AT_PLATFORM indicates the instruction set supported, while
AT_BASE_PLATFORM indicates the underlying microarchitecture.

If the architecture has defined ELF_BASE_PLATFORM, copy that value to
the user stack in the same manner as ELF_PLATFORM.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 fs/binfmt_elf.c        | 28 ++++++++++++++++++++++++++++
 include/linux/auxvec.h |  6 +++++-
 2 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 639d2d8b571..742c8f53048 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -131,6 +131,15 @@ static int padzero(unsigned long elf_bss)
 #define STACK_ALLOC(sp, len) ({ sp -= len ; sp; })
 #endif
 
+#ifndef ELF_BASE_PLATFORM
+/*
+ * AT_BASE_PLATFORM indicates the "real" hardware/microarchitecture.
+ * If the arch defines ELF_BASE_PLATFORM (in asm/elf.h), the value
+ * will be copied to the user stack in the same manner as AT_PLATFORM.
+ */
+#define ELF_BASE_PLATFORM NULL
+#endif
+
 static int
 create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
 		unsigned long load_addr, unsigned long interp_load_addr)
@@ -142,7 +151,9 @@ create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
 	elf_addr_t __user *envp;
 	elf_addr_t __user *sp;
 	elf_addr_t __user *u_platform;
+	elf_addr_t __user *u_base_platform;
 	const char *k_platform = ELF_PLATFORM;
+	const char *k_base_platform = ELF_BASE_PLATFORM;
 	int items;
 	elf_addr_t *elf_info;
 	int ei_index = 0;
@@ -172,6 +183,19 @@ create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
 			return -EFAULT;
 	}
 
+	/*
+	 * If this architecture has a "base" platform capability
+	 * string, copy it to userspace.
+	 */
+	u_base_platform = NULL;
+	if (k_base_platform) {
+		size_t len = strlen(k_base_platform) + 1;
+
+		u_base_platform = (elf_addr_t __user *)STACK_ALLOC(p, len);
+		if (__copy_to_user(u_base_platform, k_base_platform, len))
+			return -EFAULT;
+	}
+
 	/* Create the ELF interpreter info */
 	elf_info = (elf_addr_t *)current->mm->saved_auxv;
 	/* update AT_VECTOR_SIZE_BASE if the number of NEW_AUX_ENT() changes */
@@ -209,6 +233,10 @@ create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
 		NEW_AUX_ENT(AT_PLATFORM,
 			    (elf_addr_t)(unsigned long)u_platform);
 	}
+	if (k_base_platform) {
+		NEW_AUX_ENT(AT_BASE_PLATFORM,
+			    (elf_addr_t)(unsigned long)u_base_platform);
+	}
 	if (bprm->interp_flags & BINPRM_FLAGS_EXECFD) {
 		NEW_AUX_ENT(AT_EXECFD, bprm->interp_data);
 	}
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
index 0da17d14fd1..d7afa9dd663 100644
--- a/include/linux/auxvec.h
+++ b/include/linux/auxvec.h
@@ -26,9 +26,13 @@
 
 #define AT_SECURE 23   /* secure mode boolean */
 
+#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
+				 * differ from AT_PLATFORM. */
+
 #define AT_EXECFN  31	/* filename of program */
+
 #ifdef __KERNEL__
-#define AT_VECTOR_SIZE_BASE 17 /* NEW_AUX_ENT entries in auxiliary table */
+#define AT_VECTOR_SIZE_BASE 18 /* NEW_AUX_ENT entries in auxiliary table */
   /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
 #endif
 
-- 
cgit v1.2.3


From 9115d13453dee22473a1e8cacc90a8d64a9c4bc9 Mon Sep 17 00:00:00 2001
From: Nathan Lynch <ntl@pobox.com>
Date: Wed, 16 Jul 2008 09:58:51 +1000
Subject: powerpc: Enable AT_BASE_PLATFORM aux vector

Stash the first platform string matched by identify_cpu() in
powerpc_base_platform, and supply that to the ELF loader for the value
of AT_BASE_PLATFORM.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 11 +++++++++++
 include/asm-powerpc/cputable.h |  2 ++
 include/asm-powerpc/elf.h      |  8 ++++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index b936a1dd0a5..25a052c1675 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -23,6 +23,9 @@
 struct cpu_spec* cur_cpu_spec = NULL;
 EXPORT_SYMBOL(cur_cpu_spec);
 
+/* The platform string corresponding to the real PVR */
+const char *powerpc_base_platform;
+
 /* NOTE:
  * Unlike ppc32, ppc64 will only call this once for the boot CPU, it's
  * the responsibility of the appropriate CPU save/restore functions to
@@ -1652,6 +1655,14 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 			} else
 				*t = *s;
 			*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
+
+			/*
+			 * Set the base platform string once; assumes
+			 * we're called with real pvr first.
+			 */
+			if (powerpc_base_platform == NULL)
+				powerpc_base_platform = t->platform;
+
 #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
 			/* ppc64 and booke expect identify_cpu to also call
 			 * setup_cpu for that processor. I will consolidate
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 2a3e9075a5a..ef8a248dfd5 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -127,6 +127,8 @@ extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr);
 extern void do_feature_fixups(unsigned long value, void *fixup_start,
 			      void *fixup_end);
 
+extern const char *powerpc_base_platform;
+
 #endif /* __ASSEMBLY__ */
 
 /* CPU kernel features */
diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h
index 89664675b46..80d1f399ee5 100644
--- a/include/asm-powerpc/elf.h
+++ b/include/asm-powerpc/elf.h
@@ -217,6 +217,14 @@ typedef elf_vrregset_t elf_fpxregset_t;
 
 #define ELF_PLATFORM	(cur_cpu_spec->platform)
 
+/* While ELF_PLATFORM indicates the ISA supported by the platform, it
+ * may not accurately reflect the underlying behavior of the hardware
+ * (as in the case of running in Power5+ compatibility mode on a
+ * Power6 machine).  ELF_BASE_PLATFORM allows ld.so to load libraries
+ * that are tuned for the real hardware.
+ */
+#define ELF_BASE_PLATFORM (powerpc_base_platform)
+
 #ifdef __powerpc64__
 # define ELF_PLAT_INIT(_r, load_addr)	do {	\
 	_r->gpr[2] = load_addr; 		\
-- 
cgit v1.2.3


From 00bf6e906156b07cd641fe154ad0efe78f989692 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 23 Jul 2008 10:44:58 +1000
Subject: powerpc: Fallout from sysdev API changes

A struct sysdev_attribute * parameter was added to the show routine by
commit 4a0b2b4dbe1335b8b9886ba3dc85a145d5d938ed "sysdev: Pass the
attribute to the low level sysdev show/store function".

This eliminates a warning:

arch/powerpc/kernel/sysfs.c:538: warning: initialization from incompatible pointer type

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/sysfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index aba0ba95f06..800e5e9a087 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -529,7 +529,8 @@ static void register_nodes(void)
 #endif
 
 /* Only valid if CPU is present. */
-static ssize_t show_physical_id(struct sys_device *dev, char *buf)
+static ssize_t show_physical_id(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
-- 
cgit v1.2.3


From d6a61bfc06d6f2248f3e75f208d64e794082013c Mon Sep 17 00:00:00 2001
From: Luis Machado <luisgpm@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 02:10:41 +1000
Subject: powerpc: BookE hardware watchpoint support

This patch implements support for HW based watchpoint via the
DBSR_DAC (Data Address Compare) facility of the BookE processors.

It does so by interfacing with the existing DABR breakpoint code
and adding the necessary bits and pieces for the new bits to
be properly set or cleared

Signed-off-by: Luis Machado <luisgpm@br.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/entry_32.S |  6 ++--
 arch/powerpc/kernel/process.c  | 46 +++++++++++++++++++++++++++
 arch/powerpc/kernel/ptrace.c   | 72 ++++++++++++++++++++++++++++++++++++++----
 arch/powerpc/kernel/signal.c   |  6 +++-
 arch/powerpc/kernel/traps.c    | 16 ++++++++++
 arch/powerpc/mm/fault.c        | 25 ---------------
 include/asm-powerpc/system.h   |  2 ++
 7 files changed, 138 insertions(+), 35 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index da52269aec1..81c8324a4a3 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -148,7 +148,7 @@ transfer_to_handler:
 	/* Check to see if the dbcr0 register is set up to debug.  Use the
 	   internal debug mode bit to do this. */
 	lwz	r12,THREAD_DBCR0(r12)
-	andis.	r12,r12,DBCR0_IDM@h
+	andis.	r12,r12,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
 	beq+	3f
 	/* From user and task is ptraced - load up global dbcr0 */
 	li	r12,-1			/* clear all pending debug events */
@@ -292,7 +292,7 @@ syscall_exit_cont:
 	/* If the process has its own DBCR0 value, load it up.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IDM@h
+	andis.	r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
 	bnel-	load_dbcr0
 #endif
 #ifdef CONFIG_44x
@@ -720,7 +720,7 @@ restore_user:
 	/* Check whether this process has its own DBCR0 value.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IDM@h
+	andis.	r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
 	bnel-	load_dbcr0
 #endif
 
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 219f3634115..db2497ccc11 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -47,6 +47,8 @@
 #ifdef CONFIG_PPC64
 #include <asm/firmware.h>
 #endif
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
 
 extern unsigned long _get_SP(void);
 
@@ -239,6 +241,35 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code)
+{
+	siginfo_t info;
+
+	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+			11, SIGSEGV) == NOTIFY_STOP)
+		return;
+
+	if (debugger_dabr_match(regs))
+		return;
+
+	/* Clear the DAC and struct entries.  One shot trigger */
+#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE))
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
+							| DBCR0_IDM));
+#endif
+
+	/* Clear the DABR */
+	set_dabr(0);
+
+	/* Deliver the signal to userspace */
+	info.si_signo = SIGTRAP;
+	info.si_errno = 0;
+	info.si_code = TRAP_HWBKPT;
+	info.si_addr = (void __user *)address;
+	force_sig_info(SIGTRAP, &info, current);
+}
+
 static DEFINE_PER_CPU(unsigned long, current_dabr);
 
 int set_dabr(unsigned long dabr)
@@ -254,6 +285,11 @@ int set_dabr(unsigned long dabr)
 #if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
 	mtspr(SPRN_DABR, dabr);
 #endif
+
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+	mtspr(SPRN_DAC1, dabr);
+#endif
+
 	return 0;
 }
 
@@ -337,6 +373,12 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
 
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+	/* If new thread DAC (HW breakpoint) is the same then leave it */
+	if (new->thread.dabr)
+		set_dabr(new->thread.dabr);
+#endif
+
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
@@ -525,6 +567,10 @@ void flush_thread(void)
 	if (current->thread.dabr) {
 		current->thread.dabr = 0;
 		set_dabr(0);
+
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
+#endif
 	}
 }
 
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 8feb93e7890..a5d0e78779c 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -703,7 +703,7 @@ void user_enable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC;
+		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
 #else
 		regs->msr |= MSR_SE;
@@ -716,9 +716,16 @@ void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
 
+
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+	/* If DAC then do not single step, skip */
+	if (task->thread.dabr)
+		return;
+#endif
+
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = 0;
+		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
 		regs->msr &= ~MSR_DE;
 #else
 		regs->msr &= ~MSR_SE;
@@ -727,22 +734,75 @@ void user_disable_single_step(struct task_struct *task)
 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
-static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 			       unsigned long data)
 {
-	/* We only support one DABR and no IABRS at the moment */
+	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+	 *  For embedded processors we support one DAC and no IAC's at the
+	 *  moment.
+	 */
 	if (addr > 0)
 		return -EINVAL;
 
-	/* The bottom 3 bits are flags */
 	if ((data & ~0x7UL) >= TASK_SIZE)
 		return -EIO;
 
-	/* Ensure translation is on */
+#ifdef CONFIG_PPC64
+
+	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
+	 *  It was assumed, on previous implementations, that 3 bits were
+	 *  passed together with the data address, fitting the design of the
+	 *  DABR register, as follows:
+	 *
+	 *  bit 0: Read flag
+	 *  bit 1: Write flag
+	 *  bit 2: Breakpoint translation
+	 *
+	 *  Thus, we use them here as so.
+	 */
+
+	/* Ensure breakpoint translation bit is set */
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
 
+	/* Move contents to the DABR register */
 	task->thread.dabr = data;
+
+#endif
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+
+	/* As described above, it was assumed 3 bits were passed with the data
+	 *  address, but we will assume only the mode bits will be passed
+	 *  as to not cause alignment restrictions for DAC-based processors.
+	 */
+
+	/* DAC's hold the whole address without any mode flags */
+	task->thread.dabr = data & ~0x3UL;
+
+	if (task->thread.dabr == 0) {
+		task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM);
+		task->thread.regs->msr &= ~MSR_DE;
+		return 0;
+	}
+
+	/* Read or Write bits must be set */
+
+	if (!(data & 0x3UL))
+		return -EINVAL;
+
+	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
+	   register */
+	task->thread.dbcr0 = DBCR0_IDM;
+
+	/* Check for write and read flags and set DBCR0
+	   accordingly */
+	if (data & 0x1UL)
+		task->thread.dbcr0 |= DBSR_DAC1R;
+	if (data & 0x2UL)
+		task->thread.dbcr0 |= DBSR_DAC1W;
+
+	task->thread.regs->msr |= MSR_DE;
+#endif
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index ad55488939c..7aada783ec6 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -145,8 +145,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	 * user space. The DABR will have been cleared if it
 	 * triggered inside the kernel.
 	 */
-	if (current->thread.dabr)
+	if (current->thread.dabr) {
 		set_dabr(current->thread.dabr);
+#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+		mtspr(SPRN_DBCR0, current->thread.dbcr0);
+#endif
+	}
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 878fbddb6ae..81ccb8dd1a5 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1067,6 +1067,22 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 		}
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+	} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
+		regs->msr &= ~MSR_DE;
+
+		if (user_mode(regs)) {
+			current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W |
+								DBCR0_IDM);
+		} else {
+			/* Disable DAC interupts */
+			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R |
+						DBSR_DAC1W | DBCR0_IDM));
+
+			/* Clear the DAC event */
+			mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W));
+		}
+		/* Setup and send the trap to the handler */
+		do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
 	}
 }
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 1707d00331f..565b7a237c8 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -100,31 +100,6 @@ static int store_updates_sp(struct pt_regs *regs)
 	return 0;
 }
 
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-static void do_dabr(struct pt_regs *regs, unsigned long address,
-		    unsigned long error_code)
-{
-	siginfo_t info;
-
-	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
-			11, SIGSEGV) == NOTIFY_STOP)
-		return;
-
-	if (debugger_dabr_match(regs))
-		return;
-
-	/* Clear the DABR */
-	set_dabr(0);
-
-	/* Deliver the signal to userspace */
-	info.si_signo = SIGTRAP;
-	info.si_errno = 0;
-	info.si_code = TRAP_HWBKPT;
-	info.si_addr = (void __user *)address;
-	force_sig_info(SIGTRAP, &info, current);
-}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-
 /*
  * For 600- and 800-family processors, the error_code parameter is DSISR
  * for a data fault, SRR1 for an instruction fault. For 400-family processors
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index e6e25e2364e..d6648c14332 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -110,6 +110,8 @@ static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
 #endif
 
 extern int set_dabr(unsigned long dabr);
+extern void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code);
 extern void print_backtrace(unsigned long *);
 extern void show_regs(struct pt_regs * regs);
 extern void flush_instruction_cache(void);
-- 
cgit v1.2.3


From 7886250e9d71b24d0205ac6798ee855fb3836318 Mon Sep 17 00:00:00 2001
From: Mark Nelson <markn@au1.ibm.com>
Date: Thu, 24 Jul 2008 14:28:48 +1000
Subject: powerpc/cell: Fixed IOMMU mapping uses weak ordering for a pcie
 endpoint

At the moment the fixed mapping is by default strongly ordered (the
iommu_fixed=weak boot option must be used to make the fixed mapping weakly
ordered). If we're on a setup where the southbridge is being used in
endpoint mode (triblade and CAB boards) the default should be a weakly
ordered fixed mapping.

This adds a check so that if a node of type pcie-endpoint can be found in
the device tree the fixed mapping is set to be weak by default (but can be
overridden using iommu_fixed=strong).

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/iommu.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 208005ca262..031124a8e37 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1150,12 +1150,23 @@ static int iommu_fixed_disabled;
 
 static int __init setup_iommu_fixed(char *str)
 {
+	struct device_node *pciep;
+
 	if (strcmp(str, "off") == 0)
 		iommu_fixed_disabled = 1;
 
-	else if (strcmp(str, "weak") == 0)
+	/* If we can find a pcie-endpoint in the device tree assume that
+	 * we're on a triblade or a CAB so by default the fixed mapping
+	 * should be set to be weakly ordered; but only if the boot
+	 * option WASN'T set for strong ordering
+	 */
+	pciep = of_find_node_by_type(NULL, "pcie-endpoint");
+
+	if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0))
 		iommu_fixed_is_weak = 1;
 
+	of_node_put(pciep);
+
 	return 1;
 }
 __setup("iommu_fixed=", setup_iommu_fixed);
-- 
cgit v1.2.3


From 80c60bf9b96f6108c630d90efc073cd520801e6c Mon Sep 17 00:00:00 2001
From: Segher Boessenkool <segher@kernel.crashing.org>
Date: Fri, 25 Jul 2008 10:08:41 +1000
Subject: powerpc: Fix compile error with binutils 2.15

My previous patch to fix compilation with binutils-2.17 causes
a "file truncated" build error from ld with binutils 2.15 (and
possibly older), and a warning with 2.16 and 2.17.

This fixes it.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Chuck Meade <chuckmeade@mindspring.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index a914411bced..4a8ce62fe11 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -85,7 +85,7 @@ SECTIONS
 
 	/* The dummy segment contents for the bug workaround mentioned above
 	   near PHDRS.  */
-	.dummy : {
+	.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
 		LONG(0xf177)
 	} :kernel :dummy
 
-- 
cgit v1.2.3


From 545500b307658ad5783e0f3a52a32b97b2dfaed2 Mon Sep 17 00:00:00 2001
From: Nathan Fontenot <nfont@austin.ibm.com>
Date: Thu, 24 Jul 2008 04:25:00 +1000
Subject: powerpc/pseries: Remove extraneous error reporting for hcall failures
 in lparcfg

Remove the extraneous error reporting used when a hcall made from lparcfg fails.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/lparcfg.c | 32 --------------------------------
 1 file changed, 32 deletions(-)

diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 827a5726a03..20278ece31d 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -129,33 +129,6 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
-static void log_plpar_hcall_return(unsigned long rc, char *tag)
-{
-	switch(rc) {
-	case 0:
-		return;
-	case H_HARDWARE:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Hardware fault\n", tag);
-		return;
-	case H_FUNCTION:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Function not allowed\n", tag);
-		return;
-	case H_AUTHORITY:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Not authorized to this function\n", tag);
-		return;
-	case H_PARAMETER:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Bad parameter(s)\n",tag);
-		return;
-	default:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Unexpected rc(0x%lx)\n", tag, rc);
-	}
-}
-
 /*
  * H_GET_PPP hcall returns info in 4 parms.
  *  entitled_capacity,unallocated_capacity,
@@ -191,8 +164,6 @@ static unsigned int h_get_ppp(unsigned long *entitled,
 	*aggregation = retbuf[2];
 	*resource = retbuf[3];
 
-	log_plpar_hcall_return(rc, "H_GET_PPP");
-
 	return rc;
 }
 
@@ -205,9 +176,6 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
 
 	*pool_idle_time = retbuf[0];
 	*num_procs = retbuf[1];
-
-	if (rc != H_AUTHORITY)
-		log_plpar_hcall_return(rc, "H_PIC");
 }
 
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
-- 
cgit v1.2.3


From 11529396ea3190113173f7a15e59a58dbcaa36c8 Mon Sep 17 00:00:00 2001
From: Nathan Fotenot <nfont@austin.ibm.com>
Date: Thu, 24 Jul 2008 04:25:16 +1000
Subject: powerpc/pseries: Split processor entitlement retrieval and gathering
 to helper routines

Split the retrieval and setting of processor entitlement and weight into
helper routines.  This also removes the printing of the raw values
returned from h_get_ppp, the values are already parsed and printed.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/lparcfg.c | 166 ++++++++++++++++++++++--------------------
 1 file changed, 88 insertions(+), 78 deletions(-)

diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 20278ece31d..a0ca90ab5e3 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -167,7 +167,8 @@ static unsigned int h_get_ppp(unsigned long *entitled,
 	return rc;
 }
 
-static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
+static unsigned h_pic(unsigned long *pool_idle_time,
+		      unsigned long *num_procs)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
@@ -176,6 +177,51 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
 
 	*pool_idle_time = retbuf[0];
 	*num_procs = retbuf[1];
+
+	return rc;
+}
+
+/*
+ * parse_ppp_data
+ * Parse out the data returned from h_get_ppp and h_pic
+ */
+static void parse_ppp_data(struct seq_file *m)
+{
+	unsigned long h_entitled, h_unallocated;
+	unsigned long h_aggregation, h_resource;
+	int rc;
+
+	rc = h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
+		       &h_resource);
+	if (rc)
+		return;
+
+	seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
+	seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
+	seq_printf(m, "system_active_processors=%ld\n",
+		   (h_resource >> 0 * 8) & 0xffff);
+
+	/* pool related entries are apropriate for shared configs */
+	if (lppaca[0].shared_proc) {
+		unsigned long pool_idle_time, pool_procs;
+
+		seq_printf(m, "pool=%ld\n", (h_aggregation >> 0 * 8) & 0xffff);
+
+		/* report pool_capacity in percentage */
+		seq_printf(m, "pool_capacity=%ld\n",
+			   ((h_resource >> 2 * 8) & 0xffff) * 100);
+
+		h_pic(&pool_idle_time, &pool_procs);
+		seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
+		seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+	}
+
+	seq_printf(m, "unallocated_capacity_weight=%ld\n",
+		   (h_resource >> 4 * 8) & 0xFF);
+
+	seq_printf(m, "capacity_weight=%ld\n", (h_resource >> 5 * 8) & 0xFF);
+	seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
+	seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
 }
 
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
@@ -302,60 +348,11 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	partition_active_processors = lparcfg_count_active_processors();
 
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
-		unsigned long h_entitled, h_unallocated;
-		unsigned long h_aggregation, h_resource;
-		unsigned long pool_idle_time, pool_procs;
-		unsigned long purr;
-
-		h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
-			  &h_resource);
-
-		seq_printf(m, "R4=0x%lx\n", h_entitled);
-		seq_printf(m, "R5=0x%lx\n", h_unallocated);
-		seq_printf(m, "R6=0x%lx\n", h_aggregation);
-		seq_printf(m, "R7=0x%lx\n", h_resource);
-
-		purr = get_purr();
-
 		/* this call handles the ibm,get-system-parameter contents */
 		parse_system_parameter_string(m);
+		parse_ppp_data(m);
 
-		seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
-
-		seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
-
-		seq_printf(m, "system_active_processors=%ld\n",
-			   (h_resource >> 0 * 8) & 0xffff);
-
-		/* pool related entries are apropriate for shared configs */
-		if (lppaca[0].shared_proc) {
-
-			h_pic(&pool_idle_time, &pool_procs);
-
-			seq_printf(m, "pool=%ld\n",
-				   (h_aggregation >> 0 * 8) & 0xffff);
-
-			/* report pool_capacity in percentage */
-			seq_printf(m, "pool_capacity=%ld\n",
-				   ((h_resource >> 2 * 8) & 0xffff) * 100);
-
-			seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
-
-			seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
-		}
-
-		seq_printf(m, "unallocated_capacity_weight=%ld\n",
-			   (h_resource >> 4 * 8) & 0xFF);
-
-		seq_printf(m, "capacity_weight=%ld\n",
-			   (h_resource >> 5 * 8) & 0xFF);
-
-		seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
-
-		seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
-
-		seq_printf(m, "purr=%ld\n", purr);
-
+		seq_printf(m, "purr=%ld\n", get_purr());
 	} else {		/* non SPLPAR case */
 
 		seq_printf(m, "system_active_processors=%d\n",
@@ -382,6 +379,41 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	return 0;
 }
 
+static ssize_t update_ppp(u64 *entitlement, u8 *weight)
+{
+	unsigned long current_entitled;
+	unsigned long dummy;
+	unsigned long resource;
+	u8 current_weight, new_weight;
+	u64 new_entitled;
+	ssize_t retval;
+
+	/* Get our current parameters */
+	retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
+	if (retval)
+		return retval;
+
+	current_weight = (resource >> 5 * 8) & 0xFF;
+
+	if (entitlement) {
+		new_weight = current_weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = current_entitled;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+		 __FUNCTION__, current_entitled, current_weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+		 __FUNCTION__, new_entitled, new_weight);
+
+	retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
+	return retval;
+}
+
 /*
  * Interface for changing system parameters (variable capacity weight
  * and entitled capacity).  Format of input is "param_name=value";
@@ -399,12 +431,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 	char *tmp;
 	u64 new_entitled, *new_entitled_ptr = &new_entitled;
 	u8 new_weight, *new_weight_ptr = &new_weight;
-
-	unsigned long current_entitled;	/* parameters for h_get_ppp */
-	unsigned long dummy;
-	unsigned long resource;
-	u8 current_weight;
-
 	ssize_t retval = -ENOMEM;
 
 	if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
@@ -432,33 +458,17 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
 			goto out;
-		new_weight_ptr = &current_weight;
+
+		retval = update_ppp(new_entitled_ptr, NULL);
 	} else if (!strcmp(kbuf, "capacity_weight")) {
 		char *endp;
 		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
 			goto out;
-		new_entitled_ptr = &current_entitled;
-	} else
-		goto out;
 
-	/* Get our current parameters */
-	retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
-	if (retval) {
-		retval = -EIO;
+		retval = update_ppp(NULL, new_weight_ptr);
+	} else
 		goto out;
-	}
-
-	current_weight = (resource >> 5 * 8) & 0xFF;
-
-	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-		 __func__, current_entitled, current_weight);
-
-	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-		 __func__, *new_entitled_ptr, *new_weight_ptr);
-
-	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
-				    *new_weight_ptr);
 
 	if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
 		retval = count;
-- 
cgit v1.2.3


From dfc3403f0e5ffb94ee29942f313b87d4061d951b Mon Sep 17 00:00:00 2001
From: Nathan Fontenot <nfont@austin.ibm.com>
Date: Thu, 24 Jul 2008 04:27:30 +1000
Subject: powerpc/pseries: Add memory entitlement capabilities to
 /proc/ppc64/lparcfg

Update /proc/ppc64/lparcfg to display Cooperative Memory
Overcommitment statistics as reported by the H_GET_MPP hcall.  This
also updates the lparcfg interface to allow setting memory entitlement
and weight.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/lparcfg.c | 121 +++++++++++++++++++++++++++++++++++++++++-
 include/asm-powerpc/hvcall.h  |  18 ++++++-
 2 files changed, 137 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index a0ca90ab5e3..86e5b3ed10d 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -35,7 +35,7 @@
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
 
-#define MODULE_VERS "1.7"
+#define MODULE_VERS "1.8"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -129,6 +129,35 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
+/**
+ * h_get_mpp
+ * H_GET_MPP hcall returns info in 7 parms
+ */
+int h_get_mpp(struct hvcall_mpp_data *mpp_data)
+{
+	int rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+	rc = plpar_hcall9(H_GET_MPP, retbuf);
+
+	mpp_data->entitled_mem = retbuf[0];
+	mpp_data->mapped_mem = retbuf[1];
+
+	mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	mpp_data->pool_num = retbuf[2] & 0xffff;
+
+	mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
+	mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
+	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
+
+	mpp_data->pool_size = retbuf[4];
+	mpp_data->loan_request = retbuf[5];
+	mpp_data->backing_mem = retbuf[6];
+
+	return rc;
+}
+EXPORT_SYMBOL(h_get_mpp);
+
 /*
  * H_GET_PPP hcall returns info in 4 parms.
  *  entitled_capacity,unallocated_capacity,
@@ -224,6 +253,44 @@ static void parse_ppp_data(struct seq_file *m)
 	seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
 }
 
+/**
+ * parse_mpp_data
+ * Parse out data returned from h_get_mpp
+ */
+static void parse_mpp_data(struct seq_file *m)
+{
+	struct hvcall_mpp_data mpp_data;
+	int rc;
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return;
+
+	seq_printf(m, "entitled_memory=%ld\n", mpp_data.entitled_mem);
+
+	if (mpp_data.mapped_mem != -1)
+		seq_printf(m, "mapped_entitled_memory=%ld\n",
+		           mpp_data.mapped_mem);
+
+	seq_printf(m, "entitled_memory_group_number=%d\n", mpp_data.group_num);
+	seq_printf(m, "entitled_memory_pool_number=%d\n", mpp_data.pool_num);
+
+	seq_printf(m, "entitled_memory_weight=%d\n", mpp_data.mem_weight);
+	seq_printf(m, "unallocated_entitled_memory_weight=%d\n",
+	           mpp_data.unallocated_mem_weight);
+	seq_printf(m, "unallocated_io_mapping_entitlement=%ld\n",
+	           mpp_data.unallocated_entitlement);
+
+	if (mpp_data.pool_size != -1)
+		seq_printf(m, "entitled_memory_pool_size=%ld bytes\n",
+		           mpp_data.pool_size);
+
+	seq_printf(m, "entitled_memory_loan_request=%ld\n",
+	           mpp_data.loan_request);
+
+	seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem);
+}
+
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
 #define SPLPAR_MAXLENGTH 1026*(sizeof(char))
 
@@ -351,6 +418,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 		/* this call handles the ibm,get-system-parameter contents */
 		parse_system_parameter_string(m);
 		parse_ppp_data(m);
+		parse_mpp_data(m);
 
 		seq_printf(m, "purr=%ld\n", get_purr());
 	} else {		/* non SPLPAR case */
@@ -414,6 +482,43 @@ static ssize_t update_ppp(u64 *entitlement, u8 *weight)
 	return retval;
 }
 
+/**
+ * update_mpp
+ *
+ * Update the memory entitlement and weight for the partition.  Caller must
+ * specify either a new entitlement or weight, not both, to be updated
+ * since the h_set_mpp call takes both entitlement and weight as parameters.
+ */
+static ssize_t update_mpp(u64 *entitlement, u8 *weight)
+{
+	struct hvcall_mpp_data mpp_data;
+	u64 new_entitled;
+	u8 new_weight;
+	ssize_t rc;
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return rc;
+
+	if (entitlement) {
+		new_weight = mpp_data.mem_weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = mpp_data.entitled_mem;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	         __FUNCTION__, mpp_data.entitled_mem, mpp_data.mem_weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+	         __FUNCTION__, new_entitled, new_weight);
+
+	rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
+	return rc;
+}
+
 /*
  * Interface for changing system parameters (variable capacity weight
  * and entitled capacity).  Format of input is "param_name=value";
@@ -467,6 +572,20 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 			goto out;
 
 		retval = update_ppp(NULL, new_weight_ptr);
+	} else if (!strcmp(kbuf, "entitled_memory")) {
+		char *endp;
+		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			goto out;
+
+		retval = update_mpp(new_entitled_ptr, NULL);
+	} else if (!strcmp(kbuf, "entitled_memory_weight")) {
+		char *endp;
+		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			goto out;
+
+		retval = update_mpp(NULL, new_weight_ptr);
 	} else
 		goto out;
 
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
index bf6cd7cb996..46e76456cbb 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/include/asm-powerpc/hvcall.h
@@ -210,7 +210,9 @@
 #define H_JOIN			0x298
 #define H_VASI_STATE            0x2A4
 #define H_ENABLE_CRQ		0x2B0
-#define MAX_HCALL_OPCODE	H_ENABLE_CRQ
+#define H_SET_MPP		0x2D0
+#define H_GET_MPP		0x2D4
+#define MAX_HCALL_OPCODE	H_GET_MPP
 
 #ifndef __ASSEMBLY__
 
@@ -270,6 +272,20 @@ struct hcall_stats {
 };
 #define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)
 
+struct hvcall_mpp_data {
+	unsigned long entitled_mem;
+	unsigned long mapped_mem;
+	unsigned short group_num;
+	unsigned short pool_num;
+	unsigned char mem_weight;
+	unsigned char unallocated_mem_weight;
+	unsigned long unallocated_entitlement;  /* value in bytes */
+	unsigned long pool_size;
+	signed long loan_request;
+	unsigned long backing_mem;
+};
+
+int h_get_mpp(struct hvcall_mpp_data *);
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_HVCALL_H */
-- 
cgit v1.2.3


From 398778f78b76fb72cb18411487af01dea202709e Mon Sep 17 00:00:00 2001
From: Robert Jennings <rcj@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:28:05 +1000
Subject: powerpc/pseries: Split retrieval of processor entitlement data into a
 helper routine

Split the retrieval of processor entitlement data returned in the H_GET_PPP
hcall into its own helper routine.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/lparcfg.c | 81 ++++++++++++++++++++++++-------------------
 1 file changed, 46 insertions(+), 35 deletions(-)

diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 86e5b3ed10d..d82e1fa5ce2 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -158,6 +158,18 @@ int h_get_mpp(struct hvcall_mpp_data *mpp_data)
 }
 EXPORT_SYMBOL(h_get_mpp);
 
+struct hvcall_ppp_data {
+	u64	entitlement;
+	u64	unallocated_entitlement;
+	u16	group_num;
+	u16	pool_num;
+	u8	capped;
+	u8	weight;
+	u8	unallocated_weight;
+	u16	active_procs_in_pool;
+	u16	active_system_procs;
+};
+
 /*
  * H_GET_PPP hcall returns info in 4 parms.
  *  entitled_capacity,unallocated_capacity,
@@ -178,20 +190,24 @@ EXPORT_SYMBOL(h_get_mpp);
  *              XXXX - Active processors in Physical Processor Pool.
  *                  XXXX  - Processors active on platform.
  */
-static unsigned int h_get_ppp(unsigned long *entitled,
-			      unsigned long *unallocated,
-			      unsigned long *aggregation,
-			      unsigned long *resource)
+static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
 	rc = plpar_hcall(H_GET_PPP, retbuf);
 
-	*entitled = retbuf[0];
-	*unallocated = retbuf[1];
-	*aggregation = retbuf[2];
-	*resource = retbuf[3];
+	ppp_data->entitlement = retbuf[0];
+	ppp_data->unallocated_entitlement = retbuf[1];
+
+	ppp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	ppp_data->pool_num = retbuf[2] & 0xffff;
+
+	ppp_data->capped = (retbuf[3] >> 6 * 8) & 0x01;
+	ppp_data->weight = (retbuf[3] >> 5 * 8) & 0xff;
+	ppp_data->unallocated_weight = (retbuf[3] >> 4 * 8) & 0xff;
+	ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff;
+	ppp_data->active_system_procs = retbuf[3] & 0xffff;
 
 	return rc;
 }
@@ -216,41 +232,40 @@ static unsigned h_pic(unsigned long *pool_idle_time,
  */
 static void parse_ppp_data(struct seq_file *m)
 {
-	unsigned long h_entitled, h_unallocated;
-	unsigned long h_aggregation, h_resource;
+	struct hvcall_ppp_data ppp_data;
 	int rc;
 
-	rc = h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
-		       &h_resource);
+	rc = h_get_ppp(&ppp_data);
 	if (rc)
 		return;
 
-	seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
-	seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
-	seq_printf(m, "system_active_processors=%ld\n",
-		   (h_resource >> 0 * 8) & 0xffff);
+	seq_printf(m, "partition_entitled_capacity=%ld\n",
+	           ppp_data.entitlement);
+	seq_printf(m, "group=%d\n", ppp_data.group_num);
+	seq_printf(m, "system_active_processors=%d\n",
+	           ppp_data.active_system_procs);
 
 	/* pool related entries are apropriate for shared configs */
 	if (lppaca[0].shared_proc) {
 		unsigned long pool_idle_time, pool_procs;
 
-		seq_printf(m, "pool=%ld\n", (h_aggregation >> 0 * 8) & 0xffff);
+		seq_printf(m, "pool=%d\n", ppp_data.pool_num);
 
 		/* report pool_capacity in percentage */
-		seq_printf(m, "pool_capacity=%ld\n",
-			   ((h_resource >> 2 * 8) & 0xffff) * 100);
+		seq_printf(m, "pool_capacity=%d\n",
+			   ppp_data.active_procs_in_pool * 100);
 
 		h_pic(&pool_idle_time, &pool_procs);
 		seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
 		seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
 	}
 
-	seq_printf(m, "unallocated_capacity_weight=%ld\n",
-		   (h_resource >> 4 * 8) & 0xFF);
-
-	seq_printf(m, "capacity_weight=%ld\n", (h_resource >> 5 * 8) & 0xFF);
-	seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
-	seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
+	seq_printf(m, "unallocated_capacity_weight=%d\n",
+		   ppp_data.unallocated_weight);
+	seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
+	seq_printf(m, "capped=%d\n", ppp_data.capped);
+	seq_printf(m, "unallocated_capacity=%ld\n",
+		   ppp_data.unallocated_entitlement);
 }
 
 /**
@@ -449,31 +464,27 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 
 static ssize_t update_ppp(u64 *entitlement, u8 *weight)
 {
-	unsigned long current_entitled;
-	unsigned long dummy;
-	unsigned long resource;
-	u8 current_weight, new_weight;
+	struct hvcall_ppp_data ppp_data;
+	u8 new_weight;
 	u64 new_entitled;
 	ssize_t retval;
 
 	/* Get our current parameters */
-	retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
+	retval = h_get_ppp(&ppp_data);
 	if (retval)
 		return retval;
 
-	current_weight = (resource >> 5 * 8) & 0xFF;
-
 	if (entitlement) {
-		new_weight = current_weight;
+		new_weight = ppp_data.weight;
 		new_entitled = *entitlement;
 	} else if (weight) {
 		new_weight = *weight;
-		new_entitled = current_entitled;
+		new_entitled = ppp_data.entitlement;
 	} else
 		return -EINVAL;
 
 	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-		 __FUNCTION__, current_entitled, current_weight);
+	         __FUNCTION__, ppp_data.entitlement, ppp_data.weight);
 
 	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
 		 __FUNCTION__, new_entitled, new_weight);
-- 
cgit v1.2.3


From e46de429cb954d30a5642fba81d516ede518c65e Mon Sep 17 00:00:00 2001
From: Robert Jennings <rcj@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:29:03 +1000
Subject: powerpc/pseries: Enable CMO feature during platform setup

For Cooperative Memory Overcommitment (CMO), set the FW_FEATURE_CMO
flag in powerpc_firmware_features from the rtas ibm,get-system-parameters
table prior to calling iommu_init_early_pSeries.

With this, any CMO specific functionality can be controlled by checking:
 firmware_has_feature(FW_FEATURE_CMO)

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/setup.c | 71 ++++++++++++++++++++++++++++++++++
 include/asm-powerpc/firmware.h         |  3 +-
 2 files changed, 73 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 90beb444e1d..063a0d2fba3 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -314,6 +314,76 @@ static int pseries_set_xdabr(unsigned long dabr)
 			H_DABRX_KERNEL | H_DABRX_USER);
 }
 
+#define CMO_CHARACTERISTICS_TOKEN 44
+#define CMO_MAXLENGTH 1026
+
+/**
+ * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
+ * handle that here. (Stolen from parse_system_parameter_string)
+ */
+void pSeries_cmo_feature_init(void)
+{
+	char *ptr, *key, *value, *end;
+	int call_status;
+	int PrPSP = -1;
+	int SecPSP = -1;
+
+	pr_debug(" -> fw_cmo_feature_init()\n");
+	spin_lock(&rtas_data_buf_lock);
+	memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
+	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+				NULL,
+				CMO_CHARACTERISTICS_TOKEN,
+				__pa(rtas_data_buf),
+				RTAS_DATA_BUF_SIZE);
+
+	if (call_status != 0) {
+		spin_unlock(&rtas_data_buf_lock);
+		pr_debug("CMO not available\n");
+		pr_debug(" <- fw_cmo_feature_init()\n");
+		return;
+	}
+
+	end = rtas_data_buf + CMO_MAXLENGTH - 2;
+	ptr = rtas_data_buf + 2;	/* step over strlen value */
+	key = value = ptr;
+
+	while (*ptr && (ptr <= end)) {
+		/* Separate the key and value by replacing '=' with '\0' and
+		 * point the value at the string after the '='
+		 */
+		if (ptr[0] == '=') {
+			ptr[0] = '\0';
+			value = ptr + 1;
+		} else if (ptr[0] == '\0' || ptr[0] == ',') {
+			/* Terminate the string containing the key/value pair */
+			ptr[0] = '\0';
+
+			if (key == value) {
+				pr_debug("Malformed key/value pair\n");
+				/* Never found a '=', end processing */
+				break;
+			}
+
+			if (0 == strcmp(key, "PrPSP"))
+				PrPSP = simple_strtol(value, NULL, 10);
+			else if (0 == strcmp(key, "SecPSP"))
+				SecPSP = simple_strtol(value, NULL, 10);
+			value = key = ptr + 1;
+		}
+		ptr++;
+	}
+
+	if (PrPSP != -1 || SecPSP != -1) {
+		pr_info("CMO enabled\n");
+		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+		powerpc_firmware_features |= FW_FEATURE_CMO;
+	} else
+		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+	spin_unlock(&rtas_data_buf_lock);
+	pr_debug(" <- fw_cmo_feature_init()\n");
+}
+
 /*
  * Early initialization.  Relocation is on but do not reference unbolted pages
  */
@@ -329,6 +399,7 @@ static void __init pSeries_init_early(void)
 	else if (firmware_has_feature(FW_FEATURE_XDABR))
 		ppc_md.set_dabr = pseries_set_xdabr;
 
+	pSeries_cmo_feature_init();
 	iommu_init_early_pSeries();
 
 	pr_debug(" <- pSeries_init_early()\n");
diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h
index ef328995ba9..3a179827528 100644
--- a/include/asm-powerpc/firmware.h
+++ b/include/asm-powerpc/firmware.h
@@ -46,6 +46,7 @@
 #define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
 #define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
 #define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000002000000)
+#define FW_FEATURE_CMO		ASM_CONST(0x0000000004000000)
 
 #ifndef __ASSEMBLY__
 
@@ -58,7 +59,7 @@ enum {
 		FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
 		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
 		FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
-		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR,
+		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
 	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
-- 
cgit v1.2.3


From 86630a32320f83736c4c24e2c8bae218e4c56c7c Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:29:16 +1000
Subject: powerpc/pseries: Utilities to set firmware page state

Newer versions of firmware support page states, which are used by the
collaborative memory manager (future patch) to "loan" pages to the
hypervisor for use by other partitions.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/plpar_wrappers.h | 10 ++++++++++
 include/asm-powerpc/hvcall.h                    |  5 +++++
 2 files changed, 15 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index d8680b589dc..a437267c6bf 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -42,6 +42,16 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa)
 	return vpa_call(0x3, cpu, vpa);
 }
 
+static inline long plpar_page_set_loaned(unsigned long vpa)
+{
+	return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa, 0);
+}
+
+static inline long plpar_page_set_active(unsigned long vpa)
+{
+	return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa, 0);
+}
+
 extern void vpa_init(int cpu);
 
 static inline long plpar_pte_enter(unsigned long flags,
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
index 46e76456cbb..fbe2932fa9e 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/include/asm-powerpc/hvcall.h
@@ -92,6 +92,11 @@
 #define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
 #define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
 #define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE	(1UL<<(63-28))
+#define H_PAGE_UNUSED		((1UL<<(63-29)) | (1UL<<(63-30)))
+#define H_PAGE_SET_UNUSED	(H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED	(H_PAGE_SET_UNUSED | (1UL<<(63-31)))
+#define H_PAGE_SET_ACTIVE	H_PAGE_STATE_CHANGE
 #define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
 #define H_ANDCOND		(1UL<<(63-33))
 #define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
-- 
cgit v1.2.3


From 84af458bb23bf5f0ba1af4320dd2a57f7c4363e5 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:30:29 +1000
Subject: powerpc/pseries: Add collaborative memory manager

Adds a collaborative memory manager, which acts as a simple balloon driver
for System p machines that support cooperative memory overcommitment
(CMO).

Adds a platform configuration option for CMO called PPC_SMLPAR.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/Kconfig  |  23 ++
 arch/powerpc/platforms/pseries/Makefile |   1 +
 arch/powerpc/platforms/pseries/cmm.c    | 468 ++++++++++++++++++++++++++++++++
 3 files changed, 492 insertions(+)
 create mode 100644 arch/powerpc/platforms/pseries/cmm.c

diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 757c0296e0b..97619fd51e3 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -40,3 +40,26 @@ config PPC_PSERIES_DEBUG
 	depends on PPC_PSERIES && PPC_EARLY_DEBUG
 	bool "Enable extra debug logging in platforms/pseries"
 	default y
+
+config PPC_SMLPAR
+	bool "Support for shared-memory logical partitions"
+	depends on PPC_PSERIES
+	select LPARCFG
+	default n
+	help
+	  Select this option to enable shared memory partition support.
+	  With this option a system running in an LPAR can be given more
+	  memory than physically available and will allow firmware to
+	  balance memory across many LPARs.
+
+config CMM
+	tristate "Collaborative memory management"
+	depends on PPC_SMLPAR
+	default y
+	help
+	  Select this option, if you want to enable the kernel interface
+	  to reduce the memory size of the system. This is accomplished
+	  by allocating pages of memory and put them "on hold". This only
+	  makes sense for a system running in an LPAR where the unused pages
+	  will be reused for other LPARs. The interface allows firmware to
+	  balance memory across many LPARs.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 554c6e42ef2..dfe574af2dc 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
 obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
+obj-$(CONFIG_CMM)		+= cmm.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
new file mode 100644
index 00000000000..c6b3be03168
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -0,0 +1,468 @@
+/*
+ * Collaborative memory management interface.
+ *
+ * Copyright (C) 2008 IBM Corporation
+ * Author(s): Brian King (brking@linux.vnet.ibm.com),
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/oom.h>
+#include <linux/sched.h>
+#include <linux/stringify.h>
+#include <linux/swap.h>
+#include <linux/sysdev.h>
+#include <asm/firmware.h>
+#include <asm/hvcall.h>
+#include <asm/mmu.h>
+#include <asm/pgalloc.h>
+#include <asm/uaccess.h>
+
+#include "plpar_wrappers.h"
+
+#define CMM_DRIVER_VERSION	"1.0.0"
+#define CMM_DEFAULT_DELAY	1
+#define CMM_DEBUG			0
+#define CMM_DISABLE		0
+#define CMM_OOM_KB		1024
+#define CMM_MIN_MEM_MB		256
+#define KB2PAGES(_p)		((_p)>>(PAGE_SHIFT-10))
+#define PAGES2KB(_p)		((_p)<<(PAGE_SHIFT-10))
+
+static unsigned int delay = CMM_DEFAULT_DELAY;
+static unsigned int oom_kb = CMM_OOM_KB;
+static unsigned int cmm_debug = CMM_DEBUG;
+static unsigned int cmm_disabled = CMM_DISABLE;
+static unsigned long min_mem_mb = CMM_MIN_MEM_MB;
+static struct sys_device cmm_sysdev;
+
+MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CMM_DRIVER_VERSION);
+
+module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. "
+		 "[Default=" __stringify(CMM_DEFAULT_DELAY) "]");
+module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. "
+		 "[Default=" __stringify(CMM_OOM_KB) "]");
+module_param_named(min_mem_mb, min_mem_mb, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(min_mem_mb, "Minimum amount of memory (in MB) to not balloon. "
+		 "[Default=" __stringify(CMM_MIN_MEM_MB) "]");
+module_param_named(debug, cmm_debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable module debugging logging. Set to 1 to enable. "
+		 "[Default=" __stringify(CMM_DEBUG) "]");
+
+#define CMM_NR_PAGES ((PAGE_SIZE - sizeof(void *) - sizeof(unsigned long)) / sizeof(unsigned long))
+
+#define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); }
+
+struct cmm_page_array {
+	struct cmm_page_array *next;
+	unsigned long index;
+	unsigned long page[CMM_NR_PAGES];
+};
+
+static unsigned long loaned_pages;
+static unsigned long loaned_pages_target;
+static unsigned long oom_freed_pages;
+
+static struct cmm_page_array *cmm_page_list;
+static DEFINE_SPINLOCK(cmm_lock);
+
+static struct task_struct *cmm_thread_ptr;
+
+/**
+ * cmm_alloc_pages - Allocate pages and mark them as loaned
+ * @nr:	number of pages to allocate
+ *
+ * Return value:
+ * 	number of pages requested to be allocated which were not
+ **/
+static long cmm_alloc_pages(long nr)
+{
+	struct cmm_page_array *pa, *npa;
+	unsigned long addr;
+	long rc;
+
+	cmm_dbg("Begin request for %ld pages\n", nr);
+
+	while (nr) {
+		addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
+				       __GFP_NORETRY | __GFP_NOMEMALLOC);
+		if (!addr)
+			break;
+		spin_lock(&cmm_lock);
+		pa = cmm_page_list;
+		if (!pa || pa->index >= CMM_NR_PAGES) {
+			/* Need a new page for the page list. */
+			spin_unlock(&cmm_lock);
+			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
+								       __GFP_NORETRY | __GFP_NOMEMALLOC);
+			if (!npa) {
+				pr_info("%s: Can not allocate new page list\n", __FUNCTION__);
+				free_page(addr);
+				break;
+			}
+			spin_lock(&cmm_lock);
+			pa = cmm_page_list;
+
+			if (!pa || pa->index >= CMM_NR_PAGES) {
+				npa->next = pa;
+				npa->index = 0;
+				pa = npa;
+				cmm_page_list = pa;
+			} else
+				free_page((unsigned long) npa);
+		}
+
+		if ((rc = plpar_page_set_loaned(__pa(addr)))) {
+			pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc);
+			spin_unlock(&cmm_lock);
+			free_page(addr);
+			break;
+		}
+
+		pa->page[pa->index++] = addr;
+		loaned_pages++;
+		totalram_pages--;
+		spin_unlock(&cmm_lock);
+		nr--;
+	}
+
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_free_pages - Free pages and mark them as active
+ * @nr:	number of pages to free
+ *
+ * Return value:
+ * 	number of pages requested to be freed which were not
+ **/
+static long cmm_free_pages(long nr)
+{
+	struct cmm_page_array *pa;
+	unsigned long addr;
+
+	cmm_dbg("Begin free of %ld pages.\n", nr);
+	spin_lock(&cmm_lock);
+	pa = cmm_page_list;
+	while (nr) {
+		if (!pa || pa->index <= 0)
+			break;
+		addr = pa->page[--pa->index];
+
+		if (pa->index == 0) {
+			pa = pa->next;
+			free_page((unsigned long) cmm_page_list);
+			cmm_page_list = pa;
+		}
+
+		plpar_page_set_active(__pa(addr));
+		free_page(addr);
+		loaned_pages--;
+		nr--;
+		totalram_pages++;
+	}
+	spin_unlock(&cmm_lock);
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_oom_notify - OOM notifier
+ * @self:	notifier block struct
+ * @dummy:	not used
+ * @parm:	returned - number of pages freed
+ *
+ * Return value:
+ * 	NOTIFY_OK
+ **/
+static int cmm_oom_notify(struct notifier_block *self,
+			  unsigned long dummy, void *parm)
+{
+	unsigned long *freed = parm;
+	long nr = KB2PAGES(oom_kb);
+
+	cmm_dbg("OOM processing started\n");
+	nr = cmm_free_pages(nr);
+	loaned_pages_target = loaned_pages;
+	*freed += KB2PAGES(oom_kb) - nr;
+	oom_freed_pages += KB2PAGES(oom_kb) - nr;
+	cmm_dbg("OOM processing complete\n");
+	return NOTIFY_OK;
+}
+
+/**
+ * cmm_get_mpp - Read memory performance parameters
+ *
+ * Makes hcall to query the current page loan request from the hypervisor.
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_get_mpp(void)
+{
+	int rc;
+	struct hvcall_mpp_data mpp_data;
+	unsigned long active_pages_target;
+	signed long page_loan_request;
+
+	rc = h_get_mpp(&mpp_data);
+
+	if (rc != H_SUCCESS)
+		return;
+
+	page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE);
+	loaned_pages_target = page_loan_request + loaned_pages;
+	if (loaned_pages_target > oom_freed_pages)
+		loaned_pages_target -= oom_freed_pages;
+	else
+		loaned_pages_target = 0;
+
+	active_pages_target = totalram_pages + loaned_pages - loaned_pages_target;
+
+	if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE))
+		loaned_pages_target = totalram_pages + loaned_pages -
+			((min_mem_mb * 1024 * 1024) / PAGE_SIZE);
+
+	cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
+		page_loan_request, loaned_pages, loaned_pages_target,
+		oom_freed_pages, totalram_pages);
+}
+
+static struct notifier_block cmm_oom_nb = {
+	.notifier_call = cmm_oom_notify
+};
+
+/**
+ * cmm_thread - CMM task thread
+ * @dummy:	not used
+ *
+ * Return value:
+ * 	0
+ **/
+static int cmm_thread(void *dummy)
+{
+	unsigned long timeleft;
+
+	while (1) {
+		timeleft = msleep_interruptible(delay * 1000);
+
+		if (kthread_should_stop() || timeleft) {
+			loaned_pages_target = loaned_pages;
+			break;
+		}
+
+		cmm_get_mpp();
+
+		if (loaned_pages_target > loaned_pages) {
+			if (cmm_alloc_pages(loaned_pages_target - loaned_pages))
+				loaned_pages_target = loaned_pages;
+		} else if (loaned_pages_target < loaned_pages)
+			cmm_free_pages(loaned_pages - loaned_pages_target);
+	}
+	return 0;
+}
+
+#define CMM_SHOW(name, format, args...)			\
+	static ssize_t show_##name(struct sys_device *dev, char *buf)	\
+	{							\
+		return sprintf(buf, format, ##args);		\
+	}							\
+	static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL)
+
+CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
+CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
+
+static ssize_t show_oom_pages(struct sys_device *dev, char *buf)
+{
+	return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
+}
+
+static ssize_t store_oom_pages(struct sys_device *dev,
+			       const char *buf, size_t count)
+{
+	unsigned long val = simple_strtoul (buf, NULL, 10);
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	if (val != 0)
+		return -EBADMSG;
+
+	oom_freed_pages = 0;
+	return count;
+}
+
+static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO,
+		   show_oom_pages, store_oom_pages);
+
+static struct sysdev_attribute *cmm_attrs[] = {
+	&attr_loaned_kb,
+	&attr_loaned_target_kb,
+	&attr_oom_freed_kb,
+};
+
+static struct sysdev_class cmm_sysdev_class = {
+	.name = "cmm",
+};
+
+/**
+ * cmm_sysfs_register - Register with sysfs
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_sysfs_register(struct sys_device *sysdev)
+{
+	int i, rc;
+
+	if ((rc = sysdev_class_register(&cmm_sysdev_class)))
+		return rc;
+
+	sysdev->id = 0;
+	sysdev->cls = &cmm_sysdev_class;
+
+	if ((rc = sysdev_register(sysdev)))
+		goto class_unregister;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) {
+		if ((rc = sysdev_create_file(sysdev, cmm_attrs[i])))
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	while (--i >= 0)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+class_unregister:
+	sysdev_class_unregister(&cmm_sysdev_class);
+	return rc;
+}
+
+/**
+ * cmm_unregister_sysfs - Unregister from sysfs
+ *
+ **/
+static void cmm_unregister_sysfs(struct sys_device *sysdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+	sysdev_class_unregister(&cmm_sysdev_class);
+}
+
+/**
+ * cmm_init - Module initialization
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_init(void)
+{
+	int rc = -ENOMEM;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return -EOPNOTSUPP;
+
+	if ((rc = register_oom_notifier(&cmm_oom_nb)) < 0)
+		return rc;
+
+	if ((rc = cmm_sysfs_register(&cmm_sysdev)))
+		goto out_oom_notifier;
+
+	if (cmm_disabled)
+		return rc;
+
+	cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+	if (IS_ERR(cmm_thread_ptr)) {
+		rc = PTR_ERR(cmm_thread_ptr);
+		goto out_unregister_sysfs;
+	}
+
+	return rc;
+
+out_unregister_sysfs:
+	cmm_unregister_sysfs(&cmm_sysdev);
+out_oom_notifier:
+	unregister_oom_notifier(&cmm_oom_nb);
+	return rc;
+}
+
+/**
+ * cmm_exit - Module exit
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_exit(void)
+{
+	if (cmm_thread_ptr)
+		kthread_stop(cmm_thread_ptr);
+	unregister_oom_notifier(&cmm_oom_nb);
+	cmm_free_pages(loaned_pages);
+	cmm_unregister_sysfs(&cmm_sysdev);
+}
+
+/**
+ * cmm_set_disable - Disable/Enable CMM
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_set_disable(const char *val, struct kernel_param *kp)
+{
+	int disable = simple_strtoul(val, NULL, 10);
+
+	if (disable != 0 && disable != 1)
+		return -EINVAL;
+
+	if (disable && !cmm_disabled) {
+		if (cmm_thread_ptr)
+			kthread_stop(cmm_thread_ptr);
+		cmm_thread_ptr = NULL;
+		cmm_free_pages(loaned_pages);
+	} else if (!disable && cmm_disabled) {
+		cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+		if (IS_ERR(cmm_thread_ptr))
+			return PTR_ERR(cmm_thread_ptr);
+	}
+
+	cmm_disabled = disable;
+	return 0;
+}
+
+module_param_call(disable, cmm_set_disable, param_get_uint,
+		  &cmm_disabled, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable, "Disable CMM. Set to 1 to disable. "
+		 "[Default=" __stringify(CMM_DISABLE) "]");
+
+module_init(cmm_init);
+module_exit(cmm_exit);
-- 
cgit v1.2.3


From ffa5abbd0c399b32fc13a1b4718d87ee7a716999 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:30:58 +1000
Subject: powerpc/pseries: Add CMO paging statistics

With the addition of Cooperative Memory Overcommitment (CMO) support
for IBM Power Systems, two fields have been added to the VPA to report
paging statistics.  Add support in lparcfg to report them to userspace.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/lparcfg.c | 20 ++++++++++++++++++++
 include/asm-powerpc/lppaca.h  |  5 ++++-
 2 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index d82e1fa5ce2..848c3e5a637 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -409,6 +409,25 @@ static int lparcfg_count_active_processors(void)
 	return count;
 }
 
+static void pseries_cmo_data(struct seq_file *m)
+{
+	int cpu;
+	unsigned long cmo_faults = 0;
+	unsigned long cmo_fault_time = 0;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	for_each_possible_cpu(cpu) {
+		cmo_faults += lppaca[cpu].cmo_faults;
+		cmo_fault_time += lppaca[cpu].cmo_fault_time;
+	}
+
+	seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
+	seq_printf(m, "cmo_fault_time_usec=%lu\n",
+		   cmo_fault_time / tb_ticks_per_usec);
+}
+
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
 {
 	int partition_potential_processors;
@@ -434,6 +453,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 		parse_system_parameter_string(m);
 		parse_ppp_data(m);
 		parse_mpp_data(m);
+		pseries_cmo_data(m);
 
 		seq_printf(m, "purr=%ld\n", get_purr());
 	} else {		/* non SPLPAR case */
diff --git a/include/asm-powerpc/lppaca.h b/include/asm-powerpc/lppaca.h
index 567ed92cd91..2fe268b1033 100644
--- a/include/asm-powerpc/lppaca.h
+++ b/include/asm-powerpc/lppaca.h
@@ -125,7 +125,10 @@ struct lppaca {
 	// NOTE: This value will ALWAYS be zero for dedicated processors and
 	// will NEVER be zero for shared processors (ie, initialized to a 1).
 	volatile u32 yield_count;	// PLIC increments each dispatchx00-x03
-	u8	reserved6[124];		// Reserved                     x04-x7F
+	u32 reserved6;
+	volatile u64 cmo_faults;	// CMO page fault count         x08-x0F
+	volatile u64 cmo_fault_time;	// CMO page fault time          x10-x17
+	u8	reserved7[104];		// Reserved                     x18-x7F
 
 //=============================================================================
 // CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data
-- 
cgit v1.2.3


From 6490c4903d12f242bec4454301f76f6a7520e399 Mon Sep 17 00:00:00 2001
From: Robert Jennings <rcj@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:31:16 +1000
Subject: powerpc/pseries: iommu enablement for CMO

To support Cooperative Memory Overcommitment (CMO), we need to check
for failure from some of the tce hcalls.

These changes for the pseries platform affect the powerpc architecture;
patches for the other affected platforms are included in this patch.

pSeries platform IOMMU code changes:
 * platform TCE functions must handle H_NOT_ENOUGH_RESOURCES errors and
   return an error.

Architecture IOMMU code changes:
 * Calls to ppc_md.tce_build need to check return values and return
   DMA_MAPPING_ERROR for transient errors.

Architecture changes:
 * struct machdep_calls for tce_build*_pSeriesLP functions need to change
   to indicate failure.
 * all other platforms will need updates to iommu functions to match the new
   calling semantics; they will return 0 on success.  The other platforms
   default configs have been built, but no further testing was performed.

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/iommu.c            | 28 +++++++++++++++++++----
 arch/powerpc/platforms/cell/iommu.c    |  3 ++-
 arch/powerpc/platforms/iseries/iommu.c |  3 ++-
 arch/powerpc/platforms/pasemi/iommu.c  |  3 ++-
 arch/powerpc/platforms/pseries/iommu.c | 42 ++++++++++++++++++++++++++--------
 arch/powerpc/sysdev/dart_iommu.c       |  3 ++-
 include/asm-powerpc/machdep.h          |  2 +-
 7 files changed, 64 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 2385f68c175..550a19399bf 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -49,6 +49,8 @@ static int novmerge = 1;
 
 static int protect4gb = 1;
 
+static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
+
 static inline unsigned long iommu_num_pages(unsigned long vaddr,
 					    unsigned long slen)
 {
@@ -191,6 +193,7 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 {
 	unsigned long entry, flags;
 	dma_addr_t ret = DMA_ERROR_CODE;
+	int build_fail;
 
 	spin_lock_irqsave(&(tbl->it_lock), flags);
 
@@ -205,9 +208,21 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 	ret = entry << IOMMU_PAGE_SHIFT;	/* Set the return dma address */
 
 	/* Put the TCEs in the HW table */
-	ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & IOMMU_PAGE_MASK,
-			 direction, attrs);
+	build_fail = ppc_md.tce_build(tbl, entry, npages,
+	                              (unsigned long)page & IOMMU_PAGE_MASK,
+	                              direction, attrs);
+
+	/* ppc_md.tce_build() only returns non-zero for transient errors.
+	 * Clean up the table bitmap in this case and return
+	 * DMA_ERROR_CODE. For all other errors the functionality is
+	 * not altered.
+	 */
+	if (unlikely(build_fail)) {
+		__iommu_free(tbl, ret, npages);
 
+		spin_unlock_irqrestore(&(tbl->it_lock), flags);
+		return DMA_ERROR_CODE;
+	}
 
 	/* Flush/invalidate TLB caches if necessary */
 	if (ppc_md.tce_flush)
@@ -276,7 +291,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned long flags;
 	struct scatterlist *s, *outs, *segstart;
-	int outcount, incount, i;
+	int outcount, incount, i, build_fail = 0;
 	unsigned int align;
 	unsigned long handle;
 	unsigned int max_seg_size;
@@ -337,8 +352,11 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 			    npages, entry, dma_addr);
 
 		/* Insert into HW table */
-		ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK,
-				 direction, attrs);
+		build_fail = ppc_md.tce_build(tbl, entry, npages,
+		                              vaddr & IOMMU_PAGE_MASK,
+		                              direction, attrs);
+		if(unlikely(build_fail))
+			goto failure;
 
 		/* If we are in an open segment, try merging */
 		if (segstart != s) {
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 031124a8e37..e06420af5fe 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -172,7 +172,7 @@ static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
 	}
 }
 
-static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
+static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
 		unsigned long uaddr, enum dma_data_direction direction,
 		struct dma_attrs *attrs)
 {
@@ -213,6 +213,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 
 	pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
 		 index, npages, direction, base_pte);
+	return 0;
 }
 
 static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index bc818e4e203..bb464d1211b 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -41,7 +41,7 @@
 #include <asm/iseries/hv_call_event.h>
 #include <asm/iseries/iommu.h>
 
-static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
+static int tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 		unsigned long uaddr, enum dma_data_direction direction,
 		struct dma_attrs *attrs)
 {
@@ -71,6 +71,7 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 		index++;
 		uaddr += TCE_PAGE_SIZE;
 	}
+	return 0;
 }
 
 static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages)
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 70541b7a501..a0ff03a3d8d 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -83,7 +83,7 @@ static u32 *iob_l2_base;
 static struct iommu_table iommu_table_iobmap;
 static int iommu_table_iobmap_inited;
 
-static void iobmap_build(struct iommu_table *tbl, long index,
+static int iobmap_build(struct iommu_table *tbl, long index,
 			 long npages, unsigned long uaddr,
 			 enum dma_data_direction direction,
 			 struct dma_attrs *attrs)
@@ -108,6 +108,7 @@ static void iobmap_build(struct iommu_table *tbl, long index,
 		uaddr += IOBMAP_PAGE_SIZE;
 		bus_addr += IOBMAP_PAGE_SIZE;
 	}
+	return 0;
 }
 
 
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 5377dd4b849..a8c446697f9 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -48,7 +48,7 @@
 #include "plpar_wrappers.h"
 
 
-static void tce_build_pSeries(struct iommu_table *tbl, long index,
+static int tce_build_pSeries(struct iommu_table *tbl, long index,
 			      long npages, unsigned long uaddr,
 			      enum dma_data_direction direction,
 			      struct dma_attrs *attrs)
@@ -72,6 +72,7 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index,
 		uaddr += TCE_PAGE_SIZE;
 		tcep++;
 	}
+	return 0;
 }
 
 
@@ -94,14 +95,19 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
 	return *tcep;
 }
 
-static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static void tce_free_pSeriesLP(struct iommu_table*, long, long);
+static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
+
+static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				long npages, unsigned long uaddr,
 				enum dma_data_direction direction,
 				struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce, tce;
 	u64 rpn;
+	int ret = 0;
+	long tcenum_start = tcenum, npages_start = npages;
 
 	rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 	proto_tce = TCE_PCI_READ;
@@ -112,6 +118,13 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
 		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
 
+		if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+			ret = (int)rc;
+			tce_free_pSeriesLP(tbl, tcenum_start,
+			                   (npages_start - (npages + 1)));
+			break;
+		}
+
 		if (rc && printk_ratelimit()) {
 			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 			printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -123,25 +136,27 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum++;
 		rpn++;
 	}
+	return ret;
 }
 
 static DEFINE_PER_CPU(u64 *, tce_page) = NULL;
 
-static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				     long npages, unsigned long uaddr,
 				     enum dma_data_direction direction,
 				     struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce;
 	u64 *tcep;
 	u64 rpn;
 	long l, limit;
+	long tcenum_start = tcenum, npages_start = npages;
+	int ret = 0;
 
 	if (npages == 1) {
-		tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
-				    direction, attrs);
-		return;
+		return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+		                           direction, attrs);
 	}
 
 	tcep = __get_cpu_var(tce_page);
@@ -153,9 +168,8 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcep = (u64 *)__get_free_page(GFP_ATOMIC);
 		/* If allocation fails, fall back to the loop implementation */
 		if (!tcep) {
-			tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+			return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
 					    direction, attrs);
-			return;
 		}
 		__get_cpu_var(tce_page) = tcep;
 	}
@@ -187,6 +201,13 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum += limit;
 	} while (npages > 0 && !rc);
 
+	if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+		ret = (int)rc;
+		tce_freemulti_pSeriesLP(tbl, tcenum_start,
+		                        (npages_start - (npages + limit)));
+		return ret;
+	}
+
 	if (rc && printk_ratelimit()) {
 		printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -194,6 +215,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		printk("\ttce[0] val = 0x%lx\n", tcep[0]);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
+	return ret;
 }
 
 static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index de8c8b542cf..89639ecbf38 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -147,7 +147,7 @@ static void dart_flush(struct iommu_table *tbl)
 	}
 }
 
-static void dart_build(struct iommu_table *tbl, long index,
+static int dart_build(struct iommu_table *tbl, long index,
 		       long npages, unsigned long uaddr,
 		       enum dma_data_direction direction,
 		       struct dma_attrs *attrs)
@@ -184,6 +184,7 @@ static void dart_build(struct iommu_table *tbl, long index,
 	} else {
 		dart_dirty = 1;
 	}
+	return 0;
 }
 
 
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 1233d735fd2..893aafd87fd 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -76,7 +76,7 @@ struct machdep_calls {
 	 * destroyed as well */
 	void		(*hpte_clear_all)(void);
 
-	void		(*tce_build)(struct iommu_table * tbl,
+	int		(*tce_build)(struct iommu_table *tbl,
 				     long index,
 				     long npages,
 				     unsigned long uaddr,
-- 
cgit v1.2.3


From a90ab95a9576d35de0d05f9f4fc435edcccafaa9 Mon Sep 17 00:00:00 2001
From: Robert Jennings <rcj@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:31:33 +1000
Subject: powerpc/pseries: vio bus support for CMO

This is a large patch but the normal code path is not affected.  For
non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled
pSeries systems this does not affect the normal code path.  Devices that
do not perform DMA operations do not need modification with this patch.
The function get_desired_dma was renamed from get_io_entitlement for
clarity.

Overview

Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions
to be run with less RAM than the aggregate needs of the group of
partitions.  The firmware will balance memory between the partitions
and page in/out memory as needed.  Based on the number and type of IO
adpaters preset each partition is allocated an amount of memory for
DMA operations and this allocation will be guaranteed to the partition;
this is referred to as the partition's 'entitlement'.

Partitions running in a CMO environment can only have virtual IO devices
present.  The VIO bus layer will manage the IO entitlement for the system.
Accounting, at a system and per-device level, is tracked in the VIO bus
code and exposed via sysfs.  A set of dma_ops functions are added to
the bus to allow for this accounting.

Bus initialization

At initialization, the bus will calculate the minimum needs of the system
based on providing each device present with a standard minimum entitlement
along with a spare allocation for the bus to handle hotplug events.
If the minimum needs can not be met the system boot will be halted.

Device changes

The significant changes for devices while running under CMO are that the
devices must specify how much dedicated IO entitlement they desire and
must also handle DMA mapping errors that can occur due to constrained
IO memory.  The virtual IO drivers are modified to silence errors when
DMA mappings fail for CMO and handle these failures gracefully.

Each devices will be guaranteed a minimum entitlement that can always
be mapped.  Devices will specify how much entitlement they desire and
the VIO bus will attempt to provide for this.  Devices can change their
desired entitlement level at any point in time to address particular needs
(via vio_cmo_set_dev_desired()), not just at device probe time.

VIO bus changes

The system will have a particular entitlement level available from which
it can provide memory to the devices.  The bus defines two pools of memory
within this entitlement, the reserved and excess pools.  Each device is
provided with it's own entitlement no less than a system defined minimum
entitlement and no greater than what the device has specified as it's
desired entitlement.  The entitlement provided to devices comes from the
reserve pool.  The reserve pool can also contain a spare allocation as
large as the system defined minimum entitlement which is used for device
hotplug events.  Any entitlement not needed to fulfill the needs of a
reserve pool is placed in the excess pool.  Each device is guaranteed
that it can map up to it's entitled level; additional mapping are possible
as long as there is unmapped memory in the excess pool.

Bus probe

As the system starts, each device is given an entitlement equal only
to the system defined minimum entitlement.  The reserve pool is equal
to the sum of these entitlements, plus a spare allocation.  The VIO bus
also tracks the aggregate desired entitlement of all the devices.  If the
system desired entitlement is greater than the size of the reserve pool,
when devices unmap IO memory it will be reserved and a balance operation
will be scheduled for some time in the future.

Entitlement balancing

The balance function tries to fairly distribute entitlement between the
devices in the system with the goal of providing each device with it's
desired amount of entitlement.  Devices using more than what would be
ideal will have their entitled set-point adjusted; this will effectively
set a goal for lower IO memory usage as future mappings can fail and
deallocations will trigger a balance operation to distribute the newly
unmapped memory.  A fair distribution of entitlement can take several
balance operations to achieve.  Entitlement changes and device DLPAR
events will alter the state of CMO and will trigger balance operations.

Hotplug events

The VIO bus allows for changes in system entitlement at run-time via
'vio_cmo_entitlement_update()'.  When devices are added the hotplug
device event will be preceded by a system entitlement increase and this
is reversed when devices are removed.

The following changes are made that the VIO bus layer for CMO:
 * add IO memory accounting per device structure.
 * add IO memory entitlement query function to driver structure.
 * during vio bus probe, if CMO is enabled, check that driver has
   memory entitlement query function defined.  Fail if function not defined.
 * fail to register driver if io entitlement function not defined.
 * create set of dma_ops at vio level for CMO that will track allocations
   and return DMA failures once entitlement is reached.  Entitlement will
   limited by overall system entitlement.  Devices will have a reserved
   quantity of memory that is guaranteed, the rest can be used as available.
 * expose entitlement, current allocation, desired allocation, and the
   allocation error counter for devices to the user through sysfs
 * provide mechanism for changing a device's desired entitlement at run time
   for devices as an exported function and sysfs tunable
 * track any DMA failures for entitled IO memory for each vio device.
 * check entitlement against available system entitlement on device add
 * track entitlement metrics (high water mark, current usage)
 * provide function to reset high water mark
 * provide minimum and desired entitlement numbers at a bus level
 * provide drivers with a minimum guaranteed entitlement
 * balance available entitlement between devices to satisfy their needs
 * handle system entitlement changes and device hotplug

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vio.c | 1033 ++++++++++++++++++++++++++++++++++++++++++++-
 include/asm-powerpc/vio.h |   27 +-
 2 files changed, 1052 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index b77f8af7ddd..ade8aeaa2e7 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1,11 +1,12 @@
 /*
  * IBM PowerPC Virtual I/O Infrastructure Support.
  *
- *    Copyright (c) 2003-2005 IBM Corp.
+ *    Copyright (c) 2003,2008 IBM Corp.
  *     Dave Engebretsen engebret@us.ibm.com
  *     Santiago Leon santil@us.ibm.com
  *     Hollis Blanchard <hollisb@us.ibm.com>
  *     Stephen Rothwell
+ *     Robert Jennings <rcjenn@us.ibm.com>
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -46,6 +47,996 @@ static struct vio_dev vio_bus_device  = { /* fake "parent" device */
 	.dev.bus = &vio_bus_type,
 };
 
+#ifdef CONFIG_PPC_SMLPAR
+/**
+ * vio_cmo_pool - A pool of IO memory for CMO use
+ *
+ * @size: The size of the pool in bytes
+ * @free: The amount of free memory in the pool
+ */
+struct vio_cmo_pool {
+	size_t size;
+	size_t free;
+};
+
+/* How many ms to delay queued balance work */
+#define VIO_CMO_BALANCE_DELAY 100
+
+/* Portion out IO memory to CMO devices by this chunk size */
+#define VIO_CMO_BALANCE_CHUNK 131072
+
+/**
+ * vio_cmo_dev_entry - A device that is CMO-enabled and requires entitlement
+ *
+ * @vio_dev: struct vio_dev pointer
+ * @list: pointer to other devices on bus that are being tracked
+ */
+struct vio_cmo_dev_entry {
+	struct vio_dev *viodev;
+	struct list_head list;
+};
+
+/**
+ * vio_cmo - VIO bus accounting structure for CMO entitlement
+ *
+ * @lock: spinlock for entire structure
+ * @balance_q: work queue for balancing system entitlement
+ * @device_list: list of CMO-enabled devices requiring entitlement
+ * @entitled: total system entitlement in bytes
+ * @reserve: pool of memory from which devices reserve entitlement, incl. spare
+ * @excess: pool of excess entitlement not needed for device reserves or spare
+ * @spare: IO memory for device hotplug functionality
+ * @min: minimum necessary for system operation
+ * @desired: desired memory for system operation
+ * @curr: bytes currently allocated
+ * @high: high water mark for IO data usage
+ */
+struct vio_cmo {
+	spinlock_t lock;
+	struct delayed_work balance_q;
+	struct list_head device_list;
+	size_t entitled;
+	struct vio_cmo_pool reserve;
+	struct vio_cmo_pool excess;
+	size_t spare;
+	size_t min;
+	size_t desired;
+	size_t curr;
+	size_t high;
+} vio_cmo;
+
+/**
+ * vio_cmo_OF_devices - Count the number of OF devices that have DMA windows
+ */
+static int vio_cmo_num_OF_devs(void)
+{
+	struct device_node *node_vroot;
+	int count = 0;
+
+	/*
+	 * Count the number of vdevice entries with an
+	 * ibm,my-dma-window OF property
+	 */
+	node_vroot = of_find_node_by_name(NULL, "vdevice");
+	if (node_vroot) {
+		struct device_node *of_node;
+		struct property *prop;
+
+		for_each_child_of_node(node_vroot, of_node) {
+			prop = of_find_property(of_node, "ibm,my-dma-window",
+			                       NULL);
+			if (prop)
+				count++;
+		}
+	}
+	of_node_put(node_vroot);
+	return count;
+}
+
+/**
+ * vio_cmo_alloc - allocate IO memory for CMO-enable devices
+ *
+ * @viodev: VIO device requesting IO memory
+ * @size: size of allocation requested
+ *
+ * Allocations come from memory reserved for the devices and any excess
+ * IO memory available to all devices.  The spare pool used to service
+ * hotplug must be equal to %VIO_CMO_MIN_ENT for the excess pool to be
+ * made available.
+ *
+ * Return codes:
+ *  0 for successful allocation and -ENOMEM for a failure
+ */
+static inline int vio_cmo_alloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t reserve_free = 0;
+	size_t excess_free = 0;
+	int ret = -ENOMEM;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Determine the amount of free entitlement available in reserve */
+	if (viodev->cmo.entitled > viodev->cmo.allocated)
+		reserve_free = viodev->cmo.entitled - viodev->cmo.allocated;
+
+	/* If spare is not fulfilled, the excess pool can not be used. */
+	if (vio_cmo.spare >= VIO_CMO_MIN_ENT)
+		excess_free = vio_cmo.excess.free;
+
+	/* The request can be satisfied */
+	if ((reserve_free + excess_free) >= size) {
+		vio_cmo.curr += size;
+		if (vio_cmo.curr > vio_cmo.high)
+			vio_cmo.high = vio_cmo.curr;
+		viodev->cmo.allocated += size;
+		size -= min(reserve_free, size);
+		vio_cmo.excess.free -= size;
+		ret = 0;
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return ret;
+}
+
+/**
+ * vio_cmo_dealloc - deallocate IO memory from CMO-enable devices
+ * @viodev: VIO device freeing IO memory
+ * @size: size of deallocation
+ *
+ * IO memory is freed by the device back to the correct memory pools.
+ * The spare pool is replenished first from either memory pool, then
+ * the reserve pool is used to reduce device entitlement, the excess
+ * pool is used to increase the reserve pool toward the desired entitlement
+ * target, and then the remaining memory is returned to the pools.
+ *
+ */
+static inline void vio_cmo_dealloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t spare_needed = 0;
+	size_t excess_freed = 0;
+	size_t reserve_freed = size;
+	size_t tmp;
+	int balance = 0;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.curr -= size;
+
+	/* Amount of memory freed from the excess pool */
+	if (viodev->cmo.allocated > viodev->cmo.entitled) {
+		excess_freed = min(reserve_freed, (viodev->cmo.allocated -
+		                                   viodev->cmo.entitled));
+		reserve_freed -= excess_freed;
+	}
+
+	/* Remove allocation from device */
+	viodev->cmo.allocated -= (reserve_freed + excess_freed);
+
+	/* Spare is a subset of the reserve pool, replenish it first. */
+	spare_needed = VIO_CMO_MIN_ENT - vio_cmo.spare;
+
+	/*
+	 * Replenish the spare in the reserve pool from the excess pool.
+	 * This moves entitlement into the reserve pool.
+	 */
+	if (spare_needed && excess_freed) {
+		tmp = min(excess_freed, spare_needed);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		vio_cmo.spare += tmp;
+		excess_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Replenish the spare in the reserve pool from the reserve pool.
+	 * This removes entitlement from the device down to VIO_CMO_MIN_ENT,
+	 * if needed, and gives it to the spare pool. The amount of used
+	 * memory in this pool does not change.
+	 */
+	if (spare_needed && reserve_freed) {
+		tmp = min(spare_needed, min(reserve_freed,
+		                            (viodev->cmo.entitled -
+		                             VIO_CMO_MIN_ENT)));
+
+		vio_cmo.spare += tmp;
+		viodev->cmo.entitled -= tmp;
+		reserve_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Increase the reserve pool until the desired allocation is met.
+	 * Move an allocation freed from the excess pool into the reserve
+	 * pool and schedule a balance operation.
+	 */
+	if (excess_freed && (vio_cmo.desired > vio_cmo.reserve.size)) {
+		tmp = min(excess_freed, (vio_cmo.desired - vio_cmo.reserve.size));
+
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		excess_freed -= tmp;
+		balance = 1;
+	}
+
+	/* Return memory from the excess pool to that pool */
+	if (excess_freed)
+		vio_cmo.excess.free += excess_freed;
+
+	if (balance)
+		schedule_delayed_work(&vio_cmo.balance_q, VIO_CMO_BALANCE_DELAY);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_entitlement_update - Manage system entitlement changes
+ *
+ * @new_entitlement: new system entitlement to attempt to accommodate
+ *
+ * Increases in entitlement will be used to fulfill the spare entitlement
+ * and the rest is given to the excess pool.  Decreases, if they are
+ * possible, come from the excess pool and from unused device entitlement
+ *
+ * Returns: 0 on success, -ENOMEM when change can not be made
+ */
+int vio_cmo_entitlement_update(size_t new_entitlement)
+{
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail, delta, tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Entitlement increases */
+	if (new_entitlement > vio_cmo.entitled) {
+		delta = new_entitlement - vio_cmo.entitled;
+
+		/* Fulfill spare allocation */
+		if (vio_cmo.spare < VIO_CMO_MIN_ENT) {
+			tmp = min(delta, (VIO_CMO_MIN_ENT - vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			vio_cmo.reserve.size += tmp;
+			delta -= tmp;
+		}
+
+		/* Remaining new allocation goes to the excess pool */
+		vio_cmo.entitled += delta;
+		vio_cmo.excess.size += delta;
+		vio_cmo.excess.free += delta;
+
+		goto out;
+	}
+
+	/* Entitlement decreases */
+	delta = vio_cmo.entitled - new_entitlement;
+	avail = vio_cmo.excess.free;
+
+	/*
+	 * Need to check how much unused entitlement each device can
+	 * sacrifice to fulfill entitlement change.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		if (avail >= delta)
+			break;
+
+		viodev = dev_ent->viodev;
+		if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+		    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				avail += viodev->cmo.entitled -
+				         max_t(size_t, viodev->cmo.allocated,
+				               VIO_CMO_MIN_ENT);
+	}
+
+	if (delta <= avail) {
+		vio_cmo.entitled -= delta;
+
+		/* Take entitlement from the excess pool first */
+		tmp = min(vio_cmo.excess.free, delta);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.excess.free -= tmp;
+		delta -= tmp;
+
+		/*
+		 * Remove all but VIO_CMO_MIN_ENT bytes from devices
+		 * until entitlement change is served
+		 */
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			if (!delta)
+				break;
+
+			viodev = dev_ent->viodev;
+			tmp = 0;
+			if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+			    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				tmp = viodev->cmo.entitled -
+				      max_t(size_t, viodev->cmo.allocated,
+				            VIO_CMO_MIN_ENT);
+			viodev->cmo.entitled -= min(tmp, delta);
+			delta -= min(tmp, delta);
+		}
+	} else {
+		spin_unlock_irqrestore(&vio_cmo.lock, flags);
+		return -ENOMEM;
+	}
+
+out:
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_balance - Balance entitlement among devices
+ *
+ * @work: work queue structure for this operation
+ *
+ * Any system entitlement above the minimum needed for devices, or
+ * already allocated to devices, can be distributed to the devices.
+ * The list of devices is iterated through to recalculate the desired
+ * entitlement level and to determine how much entitlement above the
+ * minimum entitlement is allocated to devices.
+ *
+ * Small chunks of the available entitlement are given to devices until
+ * their requirements are fulfilled or there is no entitlement left to give.
+ * Upon completion sizes of the reserve and excess pools are calculated.
+ *
+ * The system minimum entitlement level is also recalculated here.
+ * Entitlement will be reserved for devices even after vio_bus_remove to
+ * accommodate reloading the driver.  The OF tree is walked to count the
+ * number of devices present and this will remove entitlement for devices
+ * that have actually left the system after having vio_bus_remove called.
+ */
+static void vio_cmo_balance(struct work_struct *work)
+{
+	struct vio_cmo *cmo;
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail = 0, level, chunk, need;
+	int devcount = 0, fulfilled;
+
+	cmo = container_of(work, struct vio_cmo, balance_q.work);
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Calculate minimum entitlement and fulfill spare */
+	cmo->min = vio_cmo_num_OF_devs() * VIO_CMO_MIN_ENT;
+	BUG_ON(cmo->min > cmo->entitled);
+	cmo->spare = min_t(size_t, VIO_CMO_MIN_ENT, (cmo->entitled - cmo->min));
+	cmo->min += cmo->spare;
+	cmo->desired = cmo->min;
+
+	/*
+	 * Determine how much entitlement is available and reset device
+	 * entitlements
+	 */
+	avail = cmo->entitled - cmo->spare;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		devcount++;
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		cmo->desired += (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+		avail -= max_t(size_t, viodev->cmo.allocated, VIO_CMO_MIN_ENT);
+	}
+
+	/*
+	 * Having provided each device with the minimum entitlement, loop
+	 * over the devices portioning out the remaining entitlement
+	 * until there is nothing left.
+	 */
+	level = VIO_CMO_MIN_ENT;
+	while (avail) {
+		fulfilled = 0;
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			viodev = dev_ent->viodev;
+
+			if (viodev->cmo.desired <= level) {
+				fulfilled++;
+				continue;
+			}
+
+			/*
+			 * Give the device up to VIO_CMO_BALANCE_CHUNK
+			 * bytes of entitlement, but do not exceed the
+			 * desired level of entitlement for the device.
+			 */
+			chunk = min_t(size_t, avail, VIO_CMO_BALANCE_CHUNK);
+			chunk = min(chunk, (viodev->cmo.desired -
+			                    viodev->cmo.entitled));
+			viodev->cmo.entitled += chunk;
+
+			/*
+			 * If the memory for this entitlement increase was
+			 * already allocated to the device it does not come
+			 * from the available pool being portioned out.
+			 */
+			need = max(viodev->cmo.allocated, viodev->cmo.entitled)-
+			       max(viodev->cmo.allocated, level);
+			avail -= need;
+
+		}
+		if (fulfilled == devcount)
+			break;
+		level += VIO_CMO_BALANCE_CHUNK;
+	}
+
+	/* Calculate new reserve and excess pool sizes */
+	cmo->reserve.size = cmo->min;
+	cmo->excess.free = 0;
+	cmo->excess.size = 0;
+	need = 0;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		/* Calculated reserve size above the minimum entitlement */
+		if (viodev->cmo.entitled)
+			cmo->reserve.size += (viodev->cmo.entitled -
+			                      VIO_CMO_MIN_ENT);
+		/* Calculated used excess entitlement */
+		if (viodev->cmo.allocated > viodev->cmo.entitled)
+			need += viodev->cmo.allocated - viodev->cmo.entitled;
+	}
+	cmo->excess.size = cmo->entitled - cmo->reserve.size;
+	cmo->excess.free = cmo->excess.size - need;
+
+	cancel_delayed_work(container_of(work, struct delayed_work, work));
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size,
+                                          dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	void *ret;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return NULL;
+	}
+
+	ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag);
+	if (unlikely(ret == NULL)) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_free_coherent(struct device *dev, size_t size,
+                                        void *vaddr, dma_addr_t dma_handle)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr,
+                                           size_t size,
+                                           enum dma_data_direction direction,
+                                           struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	dma_addr_t ret = DMA_ERROR_CODE;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return ret;
+	}
+
+	ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs);
+	if (unlikely(dma_mapping_error(ret))) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_single(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.unmap_single(dev, dma_handle, size, direction, attrs);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
+                                int nelems, enum dma_data_direction direction,
+                                struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	int ret, count = 0;
+	size_t alloc_size = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE);
+
+	if (vio_cmo_alloc(viodev, alloc_size)) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return 0;
+	}
+
+	ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs);
+
+	if (unlikely(!ret)) {
+		vio_cmo_dealloc(viodev, alloc_size);
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	for (sgl = sglist, count = 0; count < ret; count++, sgl++)
+		alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+	if (alloc_size)
+		vio_cmo_dealloc(viodev, alloc_size);
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_sg(struct device *dev,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	size_t alloc_size = 0;
+	int count = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+
+	dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs);
+
+	vio_cmo_dealloc(viodev, alloc_size);
+}
+
+struct dma_mapping_ops vio_dma_mapping_ops = {
+	.alloc_coherent = vio_dma_iommu_alloc_coherent,
+	.free_coherent  = vio_dma_iommu_free_coherent,
+	.map_single     = vio_dma_iommu_map_single,
+	.unmap_single   = vio_dma_iommu_unmap_single,
+	.map_sg         = vio_dma_iommu_map_sg,
+	.unmap_sg       = vio_dma_iommu_unmap_sg,
+};
+
+/**
+ * vio_cmo_set_dev_desired - Set desired entitlement for a device
+ *
+ * @viodev: struct vio_dev for device to alter
+ * @new_desired: new desired entitlement level in bytes
+ *
+ * For use by devices to request a change to their entitlement at runtime or
+ * through sysfs.  The desired entitlement level is changed and a balancing
+ * of system resources is scheduled to run in the future.
+ */
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired)
+{
+	unsigned long flags;
+	struct vio_cmo_dev_entry *dev_ent;
+	int found = 0;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (desired < VIO_CMO_MIN_ENT)
+		desired = VIO_CMO_MIN_ENT;
+
+	/*
+	 * Changes will not be made for devices not in the device list.
+	 * If it is not in the device list, then no driver is loaded
+	 * for the device and it can not receive entitlement.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			found = 1;
+			break;
+		}
+	if (!found)
+		return;
+
+	/* Increase/decrease in desired device entitlement */
+	if (desired >= viodev->cmo.desired) {
+		/* Just bump the bus and device values prior to a balance*/
+		vio_cmo.desired += desired - viodev->cmo.desired;
+		viodev->cmo.desired = desired;
+	} else {
+		/* Decrease bus and device values for desired entitlement */
+		vio_cmo.desired -= viodev->cmo.desired - desired;
+		viodev->cmo.desired = desired;
+		/*
+		 * If less entitlement is desired than current entitlement, move
+		 * any reserve memory in the change region to the excess pool.
+		 */
+		if (viodev->cmo.entitled > desired) {
+			vio_cmo.reserve.size -= viodev->cmo.entitled - desired;
+			vio_cmo.excess.size += viodev->cmo.entitled - desired;
+			/*
+			 * If entitlement moving from the reserve pool to the
+			 * excess pool is currently unused, add to the excess
+			 * free counter.
+			 */
+			if (viodev->cmo.allocated < viodev->cmo.entitled)
+				vio_cmo.excess.free += viodev->cmo.entitled -
+				                       max(viodev->cmo.allocated, desired);
+			viodev->cmo.entitled = desired;
+		}
+	}
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_bus_probe - Handle CMO specific bus probe activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Determine the devices IO memory entitlement needs, attempting
+ * to satisfy the system minimum entitlement at first and scheduling
+ * a balance operation to take care of the rest at a later time.
+ *
+ * Returns: 0 on success, -EINVAL when device doesn't support CMO, and
+ *          -ENOMEM when entitlement is not available for device or
+ *          device entry.
+ *
+ */
+static int vio_cmo_bus_probe(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	struct device *dev = &viodev->dev;
+	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	unsigned long flags;
+	size_t size;
+
+	/*
+	 * Check to see that device has a DMA window and configure
+	 * entitlement for the device.
+	 */
+	if (of_get_property(viodev->dev.archdata.of_node,
+	                    "ibm,my-dma-window", NULL)) {
+		/* Check that the driver is CMO enabled and get desired DMA */
+		if (!viodrv->get_desired_dma) {
+			dev_err(dev, "%s: device driver does not support CMO\n",
+			        __func__);
+			return -EINVAL;
+		}
+
+		viodev->cmo.desired = IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev));
+		if (viodev->cmo.desired < VIO_CMO_MIN_ENT)
+			viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		size = VIO_CMO_MIN_ENT;
+
+		dev_ent = kmalloc(sizeof(struct vio_cmo_dev_entry),
+		                  GFP_KERNEL);
+		if (!dev_ent)
+			return -ENOMEM;
+
+		dev_ent->viodev = viodev;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+		list_add(&dev_ent->list, &vio_cmo.device_list);
+	} else {
+		viodev->cmo.desired = 0;
+		size = 0;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+	}
+
+	/*
+	 * If the needs for vio_cmo.min have not changed since they
+	 * were last set, the number of devices in the OF tree has
+	 * been constant and the IO memory for this is already in
+	 * the reserve pool.
+	 */
+	if (vio_cmo.min == ((vio_cmo_num_OF_devs() + 1) *
+	                    VIO_CMO_MIN_ENT)) {
+		/* Updated desired entitlement if device requires it */
+		if (size)
+			vio_cmo.desired += (viodev->cmo.desired -
+		                        VIO_CMO_MIN_ENT);
+	} else {
+		size_t tmp;
+
+		tmp = vio_cmo.spare + vio_cmo.excess.free;
+		if (tmp < size) {
+			dev_err(dev, "%s: insufficient free "
+			        "entitlement to add device. "
+			        "Need %lu, have %lu\n", __func__,
+				size, (vio_cmo.spare + tmp));
+			spin_unlock_irqrestore(&vio_cmo.lock, flags);
+			return -ENOMEM;
+		}
+
+		/* Use excess pool first to fulfill request */
+		tmp = min(size, vio_cmo.excess.free);
+		vio_cmo.excess.free -= tmp;
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+
+		/* Use spare if excess pool was insufficient */
+		vio_cmo.spare -= size - tmp;
+
+		/* Update bus accounting */
+		vio_cmo.min += size;
+		vio_cmo.desired += viodev->cmo.desired;
+	}
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_bus_remove - Handle CMO specific bus removal activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Remove the device from the cmo device list.  The minimum entitlement
+ * will be reserved for the device as long as it is in the system.  The
+ * rest of the entitlement the device had been allocated will be returned
+ * to the system.
+ */
+static void vio_cmo_bus_remove(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (viodev->cmo.allocated) {
+		dev_err(&viodev->dev, "%s: device had %lu bytes of IO "
+		        "allocated after remove operation.\n",
+		        __func__, viodev->cmo.allocated);
+		BUG();
+	}
+
+	/*
+	 * Remove the device from the device list being maintained for
+	 * CMO enabled devices.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			list_del(&dev_ent->list);
+			kfree(dev_ent);
+			break;
+		}
+
+	/*
+	 * Devices may not require any entitlement and they do not need
+	 * to be processed.  Otherwise, return the device's entitlement
+	 * back to the pools.
+	 */
+	if (viodev->cmo.entitled) {
+		/*
+		 * This device has not yet left the OF tree, it's
+		 * minimum entitlement remains in vio_cmo.min and
+		 * vio_cmo.desired
+		 */
+		vio_cmo.desired -= (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+
+		/*
+		 * Save min allocation for device in reserve as long
+		 * as it exists in OF tree as determined by later
+		 * balance operation
+		 */
+		viodev->cmo.entitled -= VIO_CMO_MIN_ENT;
+
+		/* Replenish spare from freed reserve pool */
+		if (viodev->cmo.entitled && (vio_cmo.spare < VIO_CMO_MIN_ENT)) {
+			tmp = min(viodev->cmo.entitled, (VIO_CMO_MIN_ENT -
+			                                 vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			viodev->cmo.entitled -= tmp;
+		}
+
+		/* Remaining reserve goes to excess pool */
+		vio_cmo.excess.size += viodev->cmo.entitled;
+		vio_cmo.excess.free += viodev->cmo.entitled;
+		vio_cmo.reserve.size -= viodev->cmo.entitled;
+
+		/*
+		 * Until the device is removed it will keep a
+		 * minimum entitlement; this will guarantee that
+		 * a module unload/load will result in a success.
+		 */
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		atomic_set(&viodev->cmo.allocs_failed, 0);
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev)
+{
+	vio_dma_mapping_ops.dma_supported = dma_iommu_ops.dma_supported;
+	viodev->dev.archdata.dma_ops = &vio_dma_mapping_ops;
+}
+
+/**
+ * vio_cmo_bus_init - CMO entitlement initialization at bus init time
+ *
+ * Set up the reserve and excess entitlement pools based on available
+ * system entitlement and the number of devices in the OF tree that
+ * require entitlement in the reserve pool.
+ */
+static void vio_cmo_bus_init(void)
+{
+	struct hvcall_mpp_data mpp_data;
+	int err;
+
+	memset(&vio_cmo, 0, sizeof(struct vio_cmo));
+	spin_lock_init(&vio_cmo.lock);
+	INIT_LIST_HEAD(&vio_cmo.device_list);
+	INIT_DELAYED_WORK(&vio_cmo.balance_q, vio_cmo_balance);
+
+	/* Get current system entitlement */
+	err = h_get_mpp(&mpp_data);
+
+	/*
+	 * On failure, continue with entitlement set to 0, will panic()
+	 * later when spare is reserved.
+	 */
+	if (err != H_SUCCESS) {
+		printk(KERN_ERR "%s: unable to determine system IO "\
+		       "entitlement. (%d)\n", __func__, err);
+		vio_cmo.entitled = 0;
+	} else {
+		vio_cmo.entitled = mpp_data.entitled_mem;
+	}
+
+	/* Set reservation and check against entitlement */
+	vio_cmo.spare = VIO_CMO_MIN_ENT;
+	vio_cmo.reserve.size = vio_cmo.spare;
+	vio_cmo.reserve.size += (vio_cmo_num_OF_devs() *
+	                         VIO_CMO_MIN_ENT);
+	if (vio_cmo.reserve.size > vio_cmo.entitled) {
+		printk(KERN_ERR "%s: insufficient system entitlement\n",
+		       __func__);
+		panic("%s: Insufficient system entitlement", __func__);
+	}
+
+	/* Set the remaining accounting variables */
+	vio_cmo.excess.size = vio_cmo.entitled - vio_cmo.reserve.size;
+	vio_cmo.excess.free = vio_cmo.excess.size;
+	vio_cmo.min = vio_cmo.reserve.size;
+	vio_cmo.desired = vio_cmo.reserve.size;
+}
+
+/* sysfs device functions and data structures for CMO */
+
+#define viodev_cmo_rd_attr(name)                                        \
+static ssize_t viodev_cmo_##name##_show(struct device *dev,             \
+                                        struct device_attribute *attr,  \
+                                         char *buf)                     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", to_vio_dev(dev)->cmo.name);        \
+}
+
+static ssize_t viodev_cmo_allocs_failed_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	return sprintf(buf, "%d\n", atomic_read(&viodev->cmo.allocs_failed));
+}
+
+static ssize_t viodev_cmo_allocs_failed_reset(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	atomic_set(&viodev->cmo.allocs_failed, 0);
+	return count;
+}
+
+static ssize_t viodev_cmo_desired_set(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	size_t new_desired;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &new_desired);
+	if (ret)
+		return ret;
+
+	vio_cmo_set_dev_desired(viodev, new_desired);
+	return count;
+}
+
+viodev_cmo_rd_attr(desired);
+viodev_cmo_rd_attr(entitled);
+viodev_cmo_rd_attr(allocated);
+
+static ssize_t name_show(struct device *, struct device_attribute *, char *);
+static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
+static struct device_attribute vio_cmo_dev_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_RO(devspec),
+	__ATTR(cmo_desired,       S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_desired_show, viodev_cmo_desired_set),
+	__ATTR(cmo_entitled,      S_IRUGO, viodev_cmo_entitled_show,      NULL),
+	__ATTR(cmo_allocated,     S_IRUGO, viodev_cmo_allocated_show,     NULL),
+	__ATTR(cmo_allocs_failed, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_allocs_failed_show, viodev_cmo_allocs_failed_reset),
+	__ATTR_NULL
+};
+
+/* sysfs bus functions and data structures for CMO */
+
+#define viobus_cmo_rd_attr(name)                                        \
+static ssize_t                                                          \
+viobus_cmo_##name##_show(struct bus_type *bt, char *buf)                \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name);                     \
+}
+
+#define viobus_cmo_pool_rd_attr(name, var)                              \
+static ssize_t                                                          \
+viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf)     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name.var);                 \
+}
+
+static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf,
+                                     size_t count)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.high = vio_cmo.curr;
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+
+	return count;
+}
+
+viobus_cmo_rd_attr(entitled);
+viobus_cmo_pool_rd_attr(reserve, size);
+viobus_cmo_pool_rd_attr(excess, size);
+viobus_cmo_pool_rd_attr(excess, free);
+viobus_cmo_rd_attr(spare);
+viobus_cmo_rd_attr(min);
+viobus_cmo_rd_attr(desired);
+viobus_cmo_rd_attr(curr);
+viobus_cmo_rd_attr(high);
+
+static struct bus_attribute vio_cmo_bus_attrs[] = {
+	__ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL),
+	__ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL),
+	__ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL),
+	__ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL),
+	__ATTR(cmo_spare,   S_IRUGO, viobus_cmo_spare_show,   NULL),
+	__ATTR(cmo_min,     S_IRUGO, viobus_cmo_min_show,     NULL),
+	__ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL),
+	__ATTR(cmo_curr,    S_IRUGO, viobus_cmo_curr_show,    NULL),
+	__ATTR(cmo_high,    S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viobus_cmo_high_show, viobus_cmo_high_reset),
+	__ATTR_NULL
+};
+
+static void vio_cmo_sysfs_init(void)
+{
+	vio_bus_type.dev_attrs = vio_cmo_dev_attrs;
+	vio_bus_type.bus_attrs = vio_cmo_bus_attrs;
+}
+#else /* CONFIG_PPC_SMLPAR */
+/* Dummy functions for iSeries platform */
+int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; }
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {}
+static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; }
+static void vio_cmo_bus_remove(struct vio_dev *viodev) {}
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {}
+static void vio_cmo_bus_init() {}
+static void vio_cmo_sysfs_init() { }
+#endif /* CONFIG_PPC_SMLPAR */
+EXPORT_SYMBOL(vio_cmo_entitlement_update);
+EXPORT_SYMBOL(vio_cmo_set_dev_desired);
+
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
 	const unsigned char *dma_window;
@@ -114,8 +1105,17 @@ static int vio_bus_probe(struct device *dev)
 		return error;
 
 	id = vio_match_device(viodrv->id_table, viodev);
-	if (id)
+	if (id) {
+		memset(&viodev->cmo, 0, sizeof(viodev->cmo));
+		if (firmware_has_feature(FW_FEATURE_CMO)) {
+			error = vio_cmo_bus_probe(viodev);
+			if (error)
+				return error;
+		}
 		error = viodrv->probe(viodev, id);
+		if (error)
+			vio_cmo_bus_remove(viodev);
+	}
 
 	return error;
 }
@@ -125,12 +1125,23 @@ static int vio_bus_remove(struct device *dev)
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
 	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	struct device *devptr;
+	int ret = 1;
+
+	/*
+	 * Hold a reference to the device after the remove function is called
+	 * to allow for CMO accounting cleanup for the device.
+	 */
+	devptr = get_device(dev);
 
 	if (viodrv->remove)
-		return viodrv->remove(viodev);
+		ret = viodrv->remove(viodev);
+
+	if (!ret && firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_remove(viodev);
 
-	/* driver can't remove */
-	return 1;
+	put_device(devptr);
+	return ret;
 }
 
 /**
@@ -215,7 +1226,11 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 			viodev->unit_address = *unit_address;
 	}
 	viodev->dev.archdata.of_node = of_node_get(of_node);
-	viodev->dev.archdata.dma_ops = &dma_iommu_ops;
+
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_set_dma_ops(viodev);
+	else
+		viodev->dev.archdata.dma_ops = &dma_iommu_ops;
 	viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
 	viodev->dev.archdata.numa_node = of_node_to_nid(of_node);
 
@@ -245,6 +1260,9 @@ static int __init vio_bus_init(void)
 	int err;
 	struct device_node *node_vroot;
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_sysfs_init();
+
 	err = bus_register(&vio_bus_type);
 	if (err) {
 		printk(KERN_ERR "failed to register VIO bus\n");
@@ -262,6 +1280,9 @@ static int __init vio_bus_init(void)
 		return err;
 	}
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_init();
+
 	node_vroot = of_find_node_by_name(NULL, "vdevice");
 	if (node_vroot) {
 		struct device_node *of_node;
diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h
index 56512a968da..0a290a19594 100644
--- a/include/asm-powerpc/vio.h
+++ b/include/asm-powerpc/vio.h
@@ -39,16 +39,32 @@
 #define VIO_IRQ_DISABLE		0UL
 #define VIO_IRQ_ENABLE		1UL
 
+/*
+ * VIO CMO minimum entitlement for all devices and spare entitlement
+ */
+#define VIO_CMO_MIN_ENT 1562624
+
 struct iommu_table;
 
-/*
- * The vio_dev structure is used to describe virtual I/O devices.
+/**
+ * vio_dev - This structure is used to describe virtual I/O devices.
+ *
+ * @desired: set from return of driver's get_desired_dma() function
+ * @entitled: bytes of IO data that has been reserved for this device.
+ * @allocated: bytes of IO data currently in use by the device.
+ * @allocs_failed: number of DMA failures due to insufficient entitlement.
  */
 struct vio_dev {
 	const char *name;
 	const char *type;
 	uint32_t unit_address;
 	unsigned int irq;
+	struct {
+		size_t desired;
+		size_t entitled;
+		size_t allocated;
+		atomic_t allocs_failed;
+	} cmo;
 	struct device dev;
 };
 
@@ -56,12 +72,19 @@ struct vio_driver {
 	const struct vio_device_id *id_table;
 	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
 	int (*remove)(struct vio_dev *dev);
+	/* A driver must have a get_desired_dma() function to
+	 * be loaded in a CMO environment if it uses DMA.
+	 */
+	unsigned long (*get_desired_dma)(struct vio_dev *dev);
 	struct device_driver driver;
 };
 
 extern int vio_register_driver(struct vio_driver *drv);
 extern void vio_unregister_driver(struct vio_driver *drv);
 
+extern int vio_cmo_entitlement_update(size_t);
+extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired);
+
 extern void __devinit vio_unregister_device(struct vio_dev *dev);
 
 struct device_node;
-- 
cgit v1.2.3


From 22e1a4dd3f2a9009d1d8896a5e833b6094877008 Mon Sep 17 00:00:00 2001
From: Nathan Fontenot <nfont@austin.ibm.com>
Date: Thu, 24 Jul 2008 04:31:52 +1000
Subject: powerpc/pseries: Verify CMO memory entitlement updates with virtual
 I/O

Verify memory entitlement updates can be handled by vio.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/lparcfg.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 848c3e5a637..64381a204a5 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -34,6 +34,7 @@
 #include <asm/time.h>
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
+#include <asm/vio.h>
 
 #define MODULE_VERS "1.8"
 #define MODULE_NAME "lparcfg"
@@ -527,6 +528,15 @@ static ssize_t update_mpp(u64 *entitlement, u8 *weight)
 	u8 new_weight;
 	ssize_t rc;
 
+	if (entitlement) {
+		/* Check with vio to ensure the new memory entitlement
+		 * can be handled.
+		 */
+		rc = vio_cmo_entitlement_update(*entitlement);
+		if (rc)
+			return rc;
+	}
+
 	rc = h_get_mpp(&mpp_data);
 	if (rc)
 		return rc;
-- 
cgit v1.2.3


From ea866e6526b8a2ead92875732d41b26fdb470312 Mon Sep 17 00:00:00 2001
From: Santiago Leon <santil@us.ibm.com>
Date: Thu, 24 Jul 2008 04:34:23 +1000
Subject: ibmveth: Automatically enable larger rx buffer pools for larger mtu

Activates larger rx buffer pools when the MTU is changed to a larger
value.  This patch de-activates the large rx buffer pools when the MTU
changes to a smaller value.

Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/net/ibmveth.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 00527805e4f..007ca8735a9 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1054,7 +1054,6 @@ static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct ibmveth_adapter *adapter = dev->priv;
 	int new_mtu_oh = new_mtu + IBMVETH_BUFF_OH;
-	int reinit = 0;
 	int i, rc;
 
 	if (new_mtu < IBMVETH_MAX_MTU)
@@ -1067,15 +1066,21 @@ static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
 	if (i == IbmVethNumBufferPools)
 		return -EINVAL;
 
+	/* Deactivate all the buffer pools so that the next loop can activate
+	   only the buffer pools necessary to hold the new MTU */
+	for (i = 0; i < IbmVethNumBufferPools; i++)
+		if (adapter->rx_buff_pool[i].active) {
+			ibmveth_free_buffer_pool(adapter,
+						 &adapter->rx_buff_pool[i]);
+			adapter->rx_buff_pool[i].active = 0;
+		}
+
 	/* Look for an active buffer pool that can hold the new MTU */
 	for(i = 0; i<IbmVethNumBufferPools; i++) {
-		if (!adapter->rx_buff_pool[i].active) {
-			adapter->rx_buff_pool[i].active = 1;
-			reinit = 1;
-		}
+		adapter->rx_buff_pool[i].active = 1;
 
 		if (new_mtu_oh < adapter->rx_buff_pool[i].buff_size) {
-			if (reinit && netif_running(adapter->netdev)) {
+			if (netif_running(adapter->netdev)) {
 				adapter->pool_config = 1;
 				ibmveth_close(adapter->netdev);
 				adapter->pool_config = 0;
@@ -1402,14 +1407,15 @@ const char * buf, size_t count)
 				return -EPERM;
 			}
 
-			pool->active = 0;
 			if (netif_running(netdev)) {
 				adapter->pool_config = 1;
 				ibmveth_close(netdev);
+				pool->active = 0;
 				adapter->pool_config = 0;
 				if ((rc = ibmveth_open(netdev)))
 					return rc;
 			}
+			pool->active = 0;
 		}
 	} else if (attr == &veth_num_attr) {
 		if (value <= 0 || value > IBMVETH_MAX_POOL_COUNT)
-- 
cgit v1.2.3


From 1096d63d8e7d226630706e15648705d0187787e4 Mon Sep 17 00:00:00 2001
From: Robert Jennings <rcj@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:34:52 +1000
Subject: ibmveth: enable driver for CMO

Enable ibmveth for Cooperative Memory Overcommitment (CMO).  For this driver
it means calculating a desired amount of IO memory based on the current MTU
and updating this value with the bus when MTU changes occur.  Because DMA
mappings can fail, we have added a bounce buffer for temporary cases where
the driver can not map IO memory for the buffer pool.

The following changes are made to enable the driver for CMO:
 * DMA mapping errors will not result in error messages if entitlement has
   been exceeded and resources were not available.
 * DMA mapping errors are handled gracefully, ibmveth_replenish_buffer_pool()
   is corrected to check the return from dma_map_single and fail gracefully.
 * The driver will have a get_desired_dma function defined to function
   in a CMO environment.
 * When the MTU is changed, the driver will update the device IO entitlement

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Santiago Leon <santil@us.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/net/ibmveth.c | 169 ++++++++++++++++++++++++++++++++++++++++----------
 drivers/net/ibmveth.h |   5 ++
 2 files changed, 140 insertions(+), 34 deletions(-)

diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 007ca8735a9..e5a6e2e8454 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -33,6 +33,7 @@
 */
 
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
@@ -52,7 +53,9 @@
 #include <asm/hvcall.h>
 #include <asm/atomic.h>
 #include <asm/vio.h>
+#include <asm/iommu.h>
 #include <asm/uaccess.h>
+#include <asm/firmware.h>
 #include <linux/seq_file.h>
 
 #include "ibmveth.h"
@@ -94,8 +97,10 @@ static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter);
 static void ibmveth_proc_unregister_adapter(struct ibmveth_adapter *adapter);
 static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance);
 static void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter);
+static unsigned long ibmveth_get_desired_dma(struct vio_dev *vdev);
 static struct kobj_type ktype_veth_pool;
 
+
 #ifdef CONFIG_PROC_FS
 #define IBMVETH_PROC_DIR "ibmveth"
 static struct proc_dir_entry *ibmveth_proc_dir;
@@ -226,16 +231,16 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc
 	u32 i;
 	u32 count = pool->size - atomic_read(&pool->available);
 	u32 buffers_added = 0;
+	struct sk_buff *skb;
+	unsigned int free_index, index;
+	u64 correlator;
+	unsigned long lpar_rc;
+	dma_addr_t dma_addr;
 
 	mb();
 
 	for(i = 0; i < count; ++i) {
-		struct sk_buff *skb;
-		unsigned int free_index, index;
-		u64 correlator;
 		union ibmveth_buf_desc desc;
-		unsigned long lpar_rc;
-		dma_addr_t dma_addr;
 
 		skb = alloc_skb(pool->buff_size, GFP_ATOMIC);
 
@@ -255,6 +260,9 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc
 		dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
 				pool->buff_size, DMA_FROM_DEVICE);
 
+		if (dma_mapping_error(dma_addr))
+			goto failure;
+
 		pool->free_map[free_index] = IBM_VETH_INVALID_MAP;
 		pool->dma_addr[index] = dma_addr;
 		pool->skbuff[index] = skb;
@@ -267,25 +275,32 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc
 
 		lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
 
-		if(lpar_rc != H_SUCCESS) {
-			pool->free_map[free_index] = index;
-			pool->skbuff[index] = NULL;
-			if (pool->consumer_index == 0)
-				pool->consumer_index = pool->size - 1;
-			else
-				pool->consumer_index--;
-			dma_unmap_single(&adapter->vdev->dev,
-					pool->dma_addr[index], pool->buff_size,
-					DMA_FROM_DEVICE);
-			dev_kfree_skb_any(skb);
-			adapter->replenish_add_buff_failure++;
-			break;
-		} else {
+		if (lpar_rc != H_SUCCESS)
+			goto failure;
+		else {
 			buffers_added++;
 			adapter->replenish_add_buff_success++;
 		}
 	}
 
+	mb();
+	atomic_add(buffers_added, &(pool->available));
+	return;
+
+failure:
+	pool->free_map[free_index] = index;
+	pool->skbuff[index] = NULL;
+	if (pool->consumer_index == 0)
+		pool->consumer_index = pool->size - 1;
+	else
+		pool->consumer_index--;
+	if (!dma_mapping_error(dma_addr))
+		dma_unmap_single(&adapter->vdev->dev,
+		                 pool->dma_addr[index], pool->buff_size,
+		                 DMA_FROM_DEVICE);
+	dev_kfree_skb_any(skb);
+	adapter->replenish_add_buff_failure++;
+
 	mb();
 	atomic_add(buffers_added, &(pool->available));
 }
@@ -297,7 +312,7 @@ static void ibmveth_replenish_task(struct ibmveth_adapter *adapter)
 
 	adapter->replenish_task_cycles++;
 
-	for(i = 0; i < IbmVethNumBufferPools; i++)
+	for (i = (IbmVethNumBufferPools - 1); i >= 0; i--)
 		if(adapter->rx_buff_pool[i].active)
 			ibmveth_replenish_buffer_pool(adapter,
 						     &adapter->rx_buff_pool[i]);
@@ -472,6 +487,18 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 		if (adapter->rx_buff_pool[i].active)
 			ibmveth_free_buffer_pool(adapter,
 						 &adapter->rx_buff_pool[i]);
+
+	if (adapter->bounce_buffer != NULL) {
+		if (!dma_mapping_error(adapter->bounce_buffer_dma)) {
+			dma_unmap_single(&adapter->vdev->dev,
+					adapter->bounce_buffer_dma,
+					adapter->netdev->mtu + IBMVETH_BUFF_OH,
+					DMA_BIDIRECTIONAL);
+			adapter->bounce_buffer_dma = DMA_ERROR_CODE;
+		}
+		kfree(adapter->bounce_buffer);
+		adapter->bounce_buffer = NULL;
+	}
 }
 
 static int ibmveth_register_logical_lan(struct ibmveth_adapter *adapter,
@@ -607,6 +634,24 @@ static int ibmveth_open(struct net_device *netdev)
 		return rc;
 	}
 
+	adapter->bounce_buffer =
+	    kmalloc(netdev->mtu + IBMVETH_BUFF_OH, GFP_KERNEL);
+	if (!adapter->bounce_buffer) {
+		ibmveth_error_printk("unable to allocate bounce buffer\n");
+		ibmveth_cleanup(adapter);
+		napi_disable(&adapter->napi);
+		return -ENOMEM;
+	}
+	adapter->bounce_buffer_dma =
+	    dma_map_single(&adapter->vdev->dev, adapter->bounce_buffer,
+			   netdev->mtu + IBMVETH_BUFF_OH, DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(adapter->bounce_buffer_dma)) {
+		ibmveth_error_printk("unable to map bounce buffer\n");
+		ibmveth_cleanup(adapter);
+		napi_disable(&adapter->napi);
+		return -ENOMEM;
+	}
+
 	ibmveth_debug_printk("initial replenish cycle\n");
 	ibmveth_interrupt(netdev->irq, netdev);
 
@@ -853,10 +898,12 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	unsigned int tx_packets = 0;
 	unsigned int tx_send_failed = 0;
 	unsigned int tx_map_failed = 0;
+	int used_bounce = 0;
+	unsigned long data_dma_addr;
 
 	desc.fields.flags_len = IBMVETH_BUF_VALID | skb->len;
-	desc.fields.address = dma_map_single(&adapter->vdev->dev, skb->data,
-					     skb->len, DMA_TO_DEVICE);
+	data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
+				       skb->len, DMA_TO_DEVICE);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL &&
 	    ip_hdr(skb)->protocol != IPPROTO_TCP && skb_checksum_help(skb)) {
@@ -875,12 +922,16 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		buf[1] = 0;
 	}
 
-	if (dma_mapping_error(desc.fields.address)) {
-		ibmveth_error_printk("tx: unable to map xmit buffer\n");
+	if (dma_mapping_error(data_dma_addr)) {
+		if (!firmware_has_feature(FW_FEATURE_CMO))
+			ibmveth_error_printk("tx: unable to map xmit buffer\n");
+		skb_copy_from_linear_data(skb, adapter->bounce_buffer,
+					  skb->len);
+		desc.fields.address = adapter->bounce_buffer_dma;
 		tx_map_failed++;
-		tx_dropped++;
-		goto out;
-	}
+		used_bounce = 1;
+	} else
+		desc.fields.address = data_dma_addr;
 
 	/* send the frame. Arbitrarily set retrycount to 1024 */
 	correlator = 0;
@@ -904,8 +955,9 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		netdev->trans_start = jiffies;
 	}
 
-	dma_unmap_single(&adapter->vdev->dev, desc.fields.address,
-			 skb->len, DMA_TO_DEVICE);
+	if (!used_bounce)
+		dma_unmap_single(&adapter->vdev->dev, data_dma_addr,
+				 skb->len, DMA_TO_DEVICE);
 
 out:	spin_lock_irqsave(&adapter->stats_lock, flags);
 	netdev->stats.tx_dropped += tx_dropped;
@@ -1053,8 +1105,9 @@ static void ibmveth_set_multicast_list(struct net_device *netdev)
 static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct ibmveth_adapter *adapter = dev->priv;
+	struct vio_dev *viodev = adapter->vdev;
 	int new_mtu_oh = new_mtu + IBMVETH_BUFF_OH;
-	int i, rc;
+	int i;
 
 	if (new_mtu < IBMVETH_MAX_MTU)
 		return -EINVAL;
@@ -1085,10 +1138,15 @@ static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
 				ibmveth_close(adapter->netdev);
 				adapter->pool_config = 0;
 				dev->mtu = new_mtu;
-				if ((rc = ibmveth_open(adapter->netdev)))
-					return rc;
-			} else
-				dev->mtu = new_mtu;
+				vio_cmo_set_dev_desired(viodev,
+						ibmveth_get_desired_dma
+						(viodev));
+				return ibmveth_open(adapter->netdev);
+			}
+			dev->mtu = new_mtu;
+			vio_cmo_set_dev_desired(viodev,
+						ibmveth_get_desired_dma
+						(viodev));
 			return 0;
 		}
 	}
@@ -1103,6 +1161,46 @@ static void ibmveth_poll_controller(struct net_device *dev)
 }
 #endif
 
+/**
+ * ibmveth_get_desired_dma - Calculate IO memory desired by the driver
+ *
+ * @vdev: struct vio_dev for the device whose desired IO mem is to be returned
+ *
+ * Return value:
+ *	Number of bytes of IO data the driver will need to perform well.
+ */
+static unsigned long ibmveth_get_desired_dma(struct vio_dev *vdev)
+{
+	struct net_device *netdev = dev_get_drvdata(&vdev->dev);
+	struct ibmveth_adapter *adapter;
+	unsigned long ret;
+	int i;
+	int rxqentries = 1;
+
+	/* netdev inits at probe time along with the structures we need below*/
+	if (netdev == NULL)
+		return IOMMU_PAGE_ALIGN(IBMVETH_IO_ENTITLEMENT_DEFAULT);
+
+	adapter = netdev_priv(netdev);
+
+	ret = IBMVETH_BUFF_LIST_SIZE + IBMVETH_FILT_LIST_SIZE;
+	ret += IOMMU_PAGE_ALIGN(netdev->mtu);
+
+	for (i = 0; i < IbmVethNumBufferPools; i++) {
+		/* add the size of the active receive buffers */
+		if (adapter->rx_buff_pool[i].active)
+			ret +=
+			    adapter->rx_buff_pool[i].size *
+			    IOMMU_PAGE_ALIGN(adapter->rx_buff_pool[i].
+			            buff_size);
+		rxqentries += adapter->rx_buff_pool[i].size;
+	}
+	/* add the size of the receive queue entries */
+	ret += IOMMU_PAGE_ALIGN(rxqentries * sizeof(struct ibmveth_rx_q_entry));
+
+	return ret;
+}
+
 static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
 {
 	int rc, i;
@@ -1247,6 +1345,8 @@ static int __devexit ibmveth_remove(struct vio_dev *dev)
 	ibmveth_proc_unregister_adapter(adapter);
 
 	free_netdev(netdev);
+	dev_set_drvdata(&dev->dev, NULL);
+
 	return 0;
 }
 
@@ -1491,6 +1591,7 @@ static struct vio_driver ibmveth_driver = {
 	.id_table	= ibmveth_device_table,
 	.probe		= ibmveth_probe,
 	.remove		= ibmveth_remove,
+	.get_desired_dma = ibmveth_get_desired_dma,
 	.driver		= {
 		.name	= ibmveth_driver_name,
 		.owner	= THIS_MODULE,
diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h
index 41f61cd1885..d2818694875 100644
--- a/drivers/net/ibmveth.h
+++ b/drivers/net/ibmveth.h
@@ -93,9 +93,12 @@ static inline long h_illan_attributes(unsigned long unit_address,
   plpar_hcall_norets(H_CHANGE_LOGICAL_LAN_MAC, ua, mac)
 
 #define IbmVethNumBufferPools 5
+#define IBMVETH_IO_ENTITLEMENT_DEFAULT 4243456 /* MTU of 1500 needs 4.2Mb */
 #define IBMVETH_BUFF_OH 22 /* Overhead: 14 ethernet header + 8 opaque handle */
 #define IBMVETH_MAX_MTU 68
 #define IBMVETH_MAX_POOL_COUNT 4096
+#define IBMVETH_BUFF_LIST_SIZE 4096
+#define IBMVETH_FILT_LIST_SIZE 4096
 #define IBMVETH_MAX_BUF_SIZE (1024 * 128)
 
 static int pool_size[] = { 512, 1024 * 2, 1024 * 16, 1024 * 32, 1024 * 64 };
@@ -143,6 +146,8 @@ struct ibmveth_adapter {
     struct ibmveth_rx_q rx_queue;
     int pool_config;
     int rx_csum;
+    void *bounce_buffer;
+    dma_addr_t bounce_buffer_dma;
 
     /* adapter specific stats */
     u64 replenish_task_cycles;
-- 
cgit v1.2.3


From 7912a0ac5907df1f8b214b3ca15ccf96129daae0 Mon Sep 17 00:00:00 2001
From: Robert Jennings <rcj@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:35:27 +1000
Subject: ibmvscsi: driver enablement for CMO

Enable the driver to function in a Cooperative Memory Overcommitment (CMO)
environment.

The following changes are made to enable the driver for CMO:
 * DMA mapping errors will not result in error messages if entitlement has
   been exceeded and resources were not available.
 * The driver has a get_desired_dma function defined to function
   in a CMO environment. It will indicate how much IO memory it would like
   to function.

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 45 +++++++++++++++++++++++++++++++++-------
 drivers/scsi/ibmvscsi/ibmvscsi.h |  2 ++
 2 files changed, 40 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 5d23368a1bc..20000ec79b0 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -72,6 +72,7 @@
 #include <linux/delay.h>
 #include <asm/firmware.h>
 #include <asm/vio.h>
+#include <asm/firmware.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
@@ -426,8 +427,10 @@ static int map_sg_data(struct scsi_cmnd *cmd,
 					   SG_ALL * sizeof(struct srp_direct_buf),
 					   &evt_struct->ext_list_token, 0);
 		if (!evt_struct->ext_list) {
-			sdev_printk(KERN_ERR, cmd->device,
-				    "Can't allocate memory for indirect table\n");
+			if (!firmware_has_feature(FW_FEATURE_CMO))
+				sdev_printk(KERN_ERR, cmd->device,
+				            "Can't allocate memory "
+				            "for indirect table\n");
 			return 0;
 		}
 	}
@@ -743,7 +746,9 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
 	srp_cmd->lun = ((u64) lun) << 48;
 
 	if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) {
-		sdev_printk(KERN_ERR, cmnd->device, "couldn't convert cmd to srp_cmd\n");
+		if (!firmware_has_feature(FW_FEATURE_CMO))
+			sdev_printk(KERN_ERR, cmnd->device,
+			            "couldn't convert cmd to srp_cmd\n");
 		free_event_struct(&hostdata->pool, evt_struct);
 		return SCSI_MLQUEUE_HOST_BUSY;
 	}
@@ -855,7 +860,10 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 					    DMA_BIDIRECTIONAL);
 
 	if (dma_mapping_error(req->buffer)) {
-		dev_err(hostdata->dev, "Unable to map request_buffer for adapter_info!\n");
+		if (!firmware_has_feature(FW_FEATURE_CMO))
+			dev_err(hostdata->dev,
+			        "Unable to map request_buffer for "
+			        "adapter_info!\n");
 		free_event_struct(&hostdata->pool, evt_struct);
 		return;
 	}
@@ -1400,7 +1408,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 						    DMA_BIDIRECTIONAL);
 
 	if (dma_mapping_error(host_config->buffer)) {
-		dev_err(hostdata->dev, "dma_mapping error getting host config\n");
+		if (!firmware_has_feature(FW_FEATURE_CMO))
+			dev_err(hostdata->dev,
+			        "dma_mapping error getting host config\n");
 		free_event_struct(&hostdata->pool, evt_struct);
 		return -1;
 	}
@@ -1604,7 +1614,7 @@ static struct scsi_host_template driver_template = {
 	.eh_host_reset_handler = ibmvscsi_eh_host_reset_handler,
 	.slave_configure = ibmvscsi_slave_configure,
 	.change_queue_depth = ibmvscsi_change_queue_depth,
-	.cmd_per_lun = 16,
+	.cmd_per_lun = IBMVSCSI_CMDS_PER_LUN_DEFAULT,
 	.can_queue = IBMVSCSI_MAX_REQUESTS_DEFAULT,
 	.this_id = -1,
 	.sg_tablesize = SG_ALL,
@@ -1612,6 +1622,26 @@ static struct scsi_host_template driver_template = {
 	.shost_attrs = ibmvscsi_attrs,
 };
 
+/**
+ * ibmvscsi_get_desired_dma - Calculate IO memory desired by the driver
+ *
+ * @vdev: struct vio_dev for the device whose desired IO mem is to be returned
+ *
+ * Return value:
+ *	Number of bytes of IO data the driver will need to perform well.
+ */
+static unsigned long ibmvscsi_get_desired_dma(struct vio_dev *vdev)
+{
+	/* iu_storage data allocated in initialize_event_pool */
+	unsigned long desired_io = max_requests * sizeof(union viosrp_iu);
+
+	/* add io space for sg data */
+	desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT *
+	                     IBMVSCSI_CMDS_PER_LUN_DEFAULT);
+
+	return desired_io;
+}
+
 /**
  * Called by bus code for each adapter
  */
@@ -1641,7 +1671,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	hostdata->host = host;
 	hostdata->dev = dev;
 	atomic_set(&hostdata->request_limit, -1);
-	hostdata->host->max_sectors = 32 * 8; /* default max I/O 32 pages */
+	hostdata->host->max_sectors = IBMVSCSI_MAX_SECTORS_DEFAULT;
 
 	rc = ibmvscsi_ops->init_crq_queue(&hostdata->queue, hostdata, max_requests);
 	if (rc != 0 && rc != H_RESOURCE) {
@@ -1735,6 +1765,7 @@ static struct vio_driver ibmvscsi_driver = {
 	.id_table = ibmvscsi_device_table,
 	.probe = ibmvscsi_probe,
 	.remove = ibmvscsi_remove,
+	.get_desired_dma = ibmvscsi_get_desired_dma,
 	.driver = {
 		.name = "ibmvscsi",
 		.owner = THIS_MODULE,
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 46e850e302c..2d4339d5e16 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -45,6 +45,8 @@ struct Scsi_Host;
 #define MAX_INDIRECT_BUFS 10
 
 #define IBMVSCSI_MAX_REQUESTS_DEFAULT 100
+#define IBMVSCSI_CMDS_PER_LUN_DEFAULT 16
+#define IBMVSCSI_MAX_SECTORS_DEFAULT 256 /* 32 * 8 = default max I/O 32 pages */
 #define IBMVSCSI_MAX_CMDS_PER_LUN 64
 
 /* ------------------------------------------------------------
-- 
cgit v1.2.3


From 39c1ffecc6aabcc8105602a95ce769f27bcf6048 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 04:35:48 +1000
Subject: ibmvfc: Add support for collaborative memory overcommit

Adds support to the ibmvfc driver for collaborative memory overcommit.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index eb702b96d57..c4a7c06793c 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3819,6 +3819,20 @@ static int ibmvfc_remove(struct vio_dev *vdev)
 	return 0;
 }
 
+/**
+ * ibmvfc_get_desired_dma - Calculate DMA resources needed by the driver
+ * @vdev:	vio device struct
+ *
+ * Return value:
+ *	Number of bytes the driver will need to DMA map at the same time in
+ *	order to perform well.
+ */
+static unsigned long ibmvfc_get_desired_dma(struct vio_dev *vdev)
+{
+	unsigned long pool_dma = max_requests * sizeof(union ibmvfc_iu);
+	return pool_dma + ((512 * 1024) * driver_template.cmd_per_lun);
+}
+
 static struct vio_device_id ibmvfc_device_table[] __devinitdata = {
 	{"fcp", "IBM,vfc-client"},
 	{ "", "" }
@@ -3829,6 +3843,7 @@ static struct vio_driver ibmvfc_driver = {
 	.id_table = ibmvfc_device_table,
 	.probe = ibmvfc_probe,
 	.remove = ibmvfc_remove,
+	.get_desired_dma = ibmvfc_get_desired_dma,
 	.driver = {
 		.name = IBMVFC_NAME,
 		.owner = THIS_MODULE,
-- 
cgit v1.2.3


From 8391e42a5c1f3d757faa5e7f46a4a68f9aa6cb12 Mon Sep 17 00:00:00 2001
From: Nathan Fontenot <nfont@austin.ibm.com>
Date: Thu, 24 Jul 2008 04:36:38 +1000
Subject: powerpc/pseries: Update arch vector to indicate support for CMO

Update the architecture vector to indicate that Cooperative Memory
Overcommitment is supported if CONFIG_PPC_SMLPAR is set.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/prom_init.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1ea8c8d3ce8..c4ab2195b9c 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -643,6 +643,11 @@ static void __init early_cmdline_parse(void)
 #else
 #define OV5_MSI			0x00
 #endif /* CONFIG_PCI_MSI */
+#ifdef CONFIG_PPC_SMLPAR
+#define OV5_CMO			0x80	/* Cooperative Memory Overcommitment */
+#else
+#define OV5_CMO			0x00
+#endif
 
 /*
  * The architecture vector has an array of PVR mask/value pairs,
@@ -687,10 +692,12 @@ static unsigned char ibm_architecture_vec[] = {
 	0,				/* don't halt */
 
 	/* option vector 5: PAPR/OF options */
-	3 - 2,				/* length */
+	5 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,
+	0,
+	OV5_CMO,
 };
 
 /* Old method - ELF header with PT_NOTE sections */
-- 
cgit v1.2.3


From 16c14b4621c7b6fc4611abf1f86cd78cdb1b2b03 Mon Sep 17 00:00:00 2001
From: Nathan Fontenot <nfont@austin.ibm.com>
Date: Thu, 24 Jul 2008 05:10:46 +1000
Subject: powerpc/pseries: Remove kmalloc call in handling writes to lparcfg

There are only 4 valid name=value pairs for writes to
/proc/ppc64/lparcfg.  Current code allocates a buffer to copy
this information in from the user.  Since the longest name=value
pair will easily fit into a buffer of 64 characters, simply
put the buffer on the stack instead of allocating the buffer.

Signed-off-by: Nathan Fotenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/lparcfg.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 64381a204a5..9f856a0c3e3 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -573,29 +573,27 @@ static ssize_t update_mpp(u64 *entitlement, u8 *weight)
 static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 			     size_t count, loff_t * off)
 {
-	char *kbuf;
+	int kbuf_sz = 64;
+	char kbuf[kbuf_sz];
 	char *tmp;
 	u64 new_entitled, *new_entitled_ptr = &new_entitled;
 	u8 new_weight, *new_weight_ptr = &new_weight;
-	ssize_t retval = -ENOMEM;
+	ssize_t retval;
 
 	if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
 			firmware_has_feature(FW_FEATURE_ISERIES))
 		return -EINVAL;
 
-	kbuf = kmalloc(count, GFP_KERNEL);
-	if (!kbuf)
-		goto out;
+	if (count > kbuf_sz)
+		return -EINVAL;
 
-	retval = -EFAULT;
 	if (copy_from_user(kbuf, buf, count))
-		goto out;
+		return -EFAULT;
 
-	retval = -EINVAL;
 	kbuf[count - 1] = '\0';
 	tmp = strchr(kbuf, '=');
 	if (!tmp)
-		goto out;
+		return -EINVAL;
 
 	*tmp++ = '\0';
 
@@ -603,32 +601,32 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		char *endp;
 		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
+			return -EINVAL;
 
 		retval = update_ppp(new_entitled_ptr, NULL);
 	} else if (!strcmp(kbuf, "capacity_weight")) {
 		char *endp;
 		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
+			return -EINVAL;
 
 		retval = update_ppp(NULL, new_weight_ptr);
 	} else if (!strcmp(kbuf, "entitled_memory")) {
 		char *endp;
 		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
+			return -EINVAL;
 
 		retval = update_mpp(new_entitled_ptr, NULL);
 	} else if (!strcmp(kbuf, "entitled_memory_weight")) {
 		char *endp;
 		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
+			return -EINVAL;
 
 		retval = update_mpp(NULL, new_weight_ptr);
 	} else
-		goto out;
+		return -EINVAL;
 
 	if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
 		retval = count;
@@ -644,8 +642,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		retval = -EIO;
 	}
 
-out:
-	kfree(kbuf);
 	return retval;
 }
 
-- 
cgit v1.2.3


From 1e3519f8e1baec0b733cd42684fcd3d9681662f1 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 25 Jul 2008 16:21:11 +1000
Subject: Move update_mmu_cache() declaration from tlbflush.h to pgtable.h
 where it belongs. This fixes some build problems on some configs

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/asm-powerpc/pgtable.h  | 13 +++++++++++++
 include/asm-powerpc/tlbflush.h | 11 -----------
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/include/asm-powerpc/pgtable.h b/include/asm-powerpc/pgtable.h
index d18ffe7bc7c..dbb8ca172e4 100644
--- a/include/asm-powerpc/pgtable.h
+++ b/include/asm-powerpc/pgtable.h
@@ -38,6 +38,19 @@ extern void paging_init(void);
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
 #include <asm-generic/pgtable.h>
+
+
+/*
+ * This gets called at the end of handling a page fault, when
+ * the kernel has put a new PTE into the page table for the process.
+ * We use it to ensure coherency between the i-cache and d-cache
+ * for the page which has just been mapped in.
+ * On machines which use an MMU hash table, we use this to put a
+ * corresponding HPTE into the hash table ahead of time, instead of
+ * waiting for the inevitable extra hash-table miss exception.
+ */
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h
index 5c910814764..361cd5c7a32 100644
--- a/include/asm-powerpc/tlbflush.h
+++ b/include/asm-powerpc/tlbflush.h
@@ -162,16 +162,5 @@ extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
 
 #endif
 
-/*
- * This gets called at the end of handling a page fault, when
- * the kernel has put a new PTE into the page table for the process.
- * We use it to ensure coherency between the i-cache and d-cache
- * for the page which has just been mapped in.
- * On machines which use an MMU hash table, we use this to put a
- * corresponding HPTE into the hash table ahead of time, instead of
- * waiting for the inevitable extra hash-table miss exception.
- */
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
-
 #endif /*__KERNEL__ */
 #endif /* _ASM_POWERPC_TLBFLUSH_H */
-- 
cgit v1.2.3


From 973b7d83ebeb1e34b8bee69208916e5f0e2353c3 Mon Sep 17 00:00:00 2001
From: Tony Breeds <tony@bakeyournoodle.com>
Date: Fri, 25 Jul 2008 16:21:51 +1000
Subject: powerpc: Wireup new syscalls

signalfd4, eventfd2, epoll_create1, dup3, pipe2 and inotify_init1

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 include/asm-powerpc/syscalls.h | 1 +
 include/asm-powerpc/systbl.h   | 6 ++++++
 include/asm-powerpc/unistd.h   | 8 +++++++-
 3 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h
index 2b8a458f990..eb8eb400c66 100644
--- a/include/asm-powerpc/syscalls.h
+++ b/include/asm-powerpc/syscalls.h
@@ -31,6 +31,7 @@ asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
 		unsigned long p3, unsigned long p4, unsigned long p5,
 		unsigned long p6, struct pt_regs *regs);
 asmlinkage long sys_pipe(int __user *fildes);
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
 asmlinkage long sys_rt_sigaction(int sig,
 		const struct sigaction __user *act,
 		struct sigaction __user *oact, size_t sigsetsize);
diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h
index ae7085c6569..e084272ed1c 100644
--- a/include/asm-powerpc/systbl.h
+++ b/include/asm-powerpc/systbl.h
@@ -316,3 +316,9 @@ COMPAT_SYS(fallocate)
 SYSCALL(subpage_prot)
 COMPAT_SYS_SPU(timerfd_settime)
 COMPAT_SYS_SPU(timerfd_gettime)
+COMPAT_SYS_SPU(signalfd4)
+SYSCALL_SPU(eventfd2)
+SYSCALL_SPU(epoll_create1)
+SYSCALL_SPU(dup3)
+SYSCALL_SPU(pipe2)
+SYSCALL(inotify_init1)
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index ce91bb66206..e07d0c76ed7 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -335,10 +335,16 @@
 #define __NR_subpage_prot	310
 #define __NR_timerfd_settime	311
 #define __NR_timerfd_gettime	312
+#define __NR_signalfd4		313
+#define __NR_eventfd2		314
+#define __NR_epoll_create1	315
+#define __NR_dup3		316
+#define __NR_pipe2		317
+#define __NR_inotify_init1	318
 
 #ifdef __KERNEL__
 
-#define __NR_syscalls		313
+#define __NR_syscalls		319
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls
-- 
cgit v1.2.3


From cffe1c5d7a5a1e54f7c2c6d0510f651a965bccc3 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 25 Jul 2008 01:25:04 -0700
Subject: pkt_sched: Fix locking in shutdown_scheduler_queue()

Qdisc locks need to be held with BH disabled.

Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 4ac7e3a8c25..43abd4d27ea 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -736,9 +736,9 @@ static void shutdown_scheduler_queue(struct net_device *dev,
 		dev_queue->qdisc = qdisc_default;
 		dev_queue->qdisc_sleeping = qdisc_default;
 
-		spin_lock(root_lock);
+		spin_lock_bh(root_lock);
 		qdisc_destroy(qdisc);
-		spin_unlock(root_lock);
+		spin_unlock_bh(root_lock);
 	}
 }
 
-- 
cgit v1.2.3


From d37e6bf68fc1eb34a4ad21d9ae8890ed37ea80e7 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Thu, 24 Jul 2008 18:28:11 +0300
Subject: UBI: always start the background thread

This fix only affects UBI debugging.

If the the background thread is disabled for debugging purposes,
start it anyway, because otherwise we see tonns of kernel debugging
complaints like this:

INFO: task ubi_bgt0d:26857 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ubi_bgt0d     D dd37bf94     0 26857      2
       dd37bfcc 00000086 f8e17cea dd37bf94 00000046 00000000 00000000 f5c62430
       f5c62430 f5c62590 c2a09c80 f6cbd498 dd8e9cbc 00000296 dd37bfb0 00000296
       dd8e9cb8 dd8e9cbc dd37bfcc c0119774 00000000 00000000 c0132e89 f6961560
Call Trace:
 [<f8e17cea>] ? ubi_thread+0x0/0x127 [ubi]
 [<c0119774>] ? complete+0x43/0x4b
 [<c0132e89>] ? kthread+0x0/0x5b
 [<f8e17cea>] ? ubi_thread+0x0/0x127 [ubi]
 [<c0132eae>] kthread+0x25/0x5b
 [<c0132e89>] ? kthread+0x0/0x5b
 [<c0104953>] kernel_thread_helper+0x7/0x14
 =======================

So start it, and go sleep inside it, instead of creating it and never
start.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 drivers/mtd/ubi/build.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index eba760b3b8c..c7630a22831 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -870,11 +870,9 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 		ubi->beb_rsvd_pebs);
 	ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
 
-	/* Enable the background thread */
-	if (!DBG_DISABLE_BGT) {
+	if (!DBG_DISABLE_BGT)
 		ubi->thread_enabled = 1;
-		wake_up_process(ubi->bgt_thread);
-	}
+	wake_up_process(ubi->bgt_thread);
 
 	ubi_devices[ubi_num] = ubi;
 	return ubi_num;
-- 
cgit v1.2.3


From 6fccab671f2f0a24b799f29a4ec878f62d34656c Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 25 Jul 2008 02:54:40 -0700
Subject: ipsec: ipcomp - Merge IPComp implementations

This patch merges the IPv4/IPv6 IPComp implementations since most
of the code is identical.  As a result future enhancements will no
longer need to be duplicated.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/ipcomp.h   |   6 +
 net/ipv4/Kconfig       |   4 +-
 net/ipv4/ipcomp.c      | 315 +-------------------------------------------
 net/ipv6/Kconfig       |   4 +-
 net/ipv6/ipcomp6.c     | 298 +----------------------------------------
 net/xfrm/Kconfig       |   6 +
 net/xfrm/Makefile      |   1 +
 net/xfrm/xfrm_ipcomp.c | 349 +++++++++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 377 insertions(+), 606 deletions(-)
 create mode 100644 net/xfrm/xfrm_ipcomp.c

diff --git a/include/net/ipcomp.h b/include/net/ipcomp.h
index 330b74e813a..2a1092abaa0 100644
--- a/include/net/ipcomp.h
+++ b/include/net/ipcomp.h
@@ -14,6 +14,12 @@ struct ipcomp_data {
 
 struct ip_comp_hdr;
 struct sk_buff;
+struct xfrm_state;
+
+int ipcomp_input(struct xfrm_state *x, struct sk_buff *skb);
+int ipcomp_output(struct xfrm_state *x, struct sk_buff *skb);
+void ipcomp_destroy(struct xfrm_state *x);
+int ipcomp_init_state(struct xfrm_state *x);
 
 static inline struct ip_comp_hdr *ip_comp_hdr(const struct sk_buff *skb)
 {
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 4670683b468..591ea23639c 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -356,10 +356,8 @@ config INET_ESP
 
 config INET_IPCOMP
 	tristate "IP: IPComp transformation"
-	select XFRM
 	select INET_XFRM_TUNNEL
-	select CRYPTO
-	select CRYPTO_DEFLATE
+	select XFRM_IPCOMP
 	---help---
 	  Support for IP Payload Compression Protocol (IPComp) (RFC3173),
 	  typically needed for IPsec.
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index a75807b971b..a42b64d040c 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -14,153 +14,14 @@
  *   - Adaptive compression.
  */
 #include <linux/module.h>
-#include <linux/crypto.h>
 #include <linux/err.h>
-#include <linux/pfkeyv2.h>
-#include <linux/percpu.h>
-#include <linux/smp.h>
-#include <linux/list.h>
-#include <linux/vmalloc.h>
 #include <linux/rtnetlink.h>
-#include <linux/mutex.h>
 #include <net/ip.h>
 #include <net/xfrm.h>
 #include <net/icmp.h>
 #include <net/ipcomp.h>
 #include <net/protocol.h>
-
-struct ipcomp_tfms {
-	struct list_head list;
-	struct crypto_comp **tfms;
-	int users;
-};
-
-static DEFINE_MUTEX(ipcomp_resource_mutex);
-static void **ipcomp_scratches;
-static int ipcomp_scratch_users;
-static LIST_HEAD(ipcomp_tfms_list);
-
-static int ipcomp_decompress(struct xfrm_state *x, struct sk_buff *skb)
-{
-	struct ipcomp_data *ipcd = x->data;
-	const int plen = skb->len;
-	int dlen = IPCOMP_SCRATCH_SIZE;
-	const u8 *start = skb->data;
-	const int cpu = get_cpu();
-	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
-	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
-	int err = crypto_comp_decompress(tfm, start, plen, scratch, &dlen);
-
-	if (err)
-		goto out;
-
-	if (dlen < (plen + sizeof(struct ip_comp_hdr))) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	err = pskb_expand_head(skb, 0, dlen - plen, GFP_ATOMIC);
-	if (err)
-		goto out;
-
-	skb->truesize += dlen - plen;
-	__skb_put(skb, dlen - plen);
-	skb_copy_to_linear_data(skb, scratch, dlen);
-out:
-	put_cpu();
-	return err;
-}
-
-static int ipcomp_input(struct xfrm_state *x, struct sk_buff *skb)
-{
-	int nexthdr;
-	int err = -ENOMEM;
-	struct ip_comp_hdr *ipch;
-
-	if (skb_linearize_cow(skb))
-		goto out;
-
-	skb->ip_summed = CHECKSUM_NONE;
-
-	/* Remove ipcomp header and decompress original payload */
-	ipch = (void *)skb->data;
-	nexthdr = ipch->nexthdr;
-
-	skb->transport_header = skb->network_header + sizeof(*ipch);
-	__skb_pull(skb, sizeof(*ipch));
-	err = ipcomp_decompress(x, skb);
-	if (err)
-		goto out;
-
-	err = nexthdr;
-
-out:
-	return err;
-}
-
-static int ipcomp_compress(struct xfrm_state *x, struct sk_buff *skb)
-{
-	struct ipcomp_data *ipcd = x->data;
-	const int plen = skb->len;
-	int dlen = IPCOMP_SCRATCH_SIZE;
-	u8 *start = skb->data;
-	const int cpu = get_cpu();
-	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
-	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
-	int err;
-
-	local_bh_disable();
-	err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
-	local_bh_enable();
-	if (err)
-		goto out;
-
-	if ((dlen + sizeof(struct ip_comp_hdr)) >= plen) {
-		err = -EMSGSIZE;
-		goto out;
-	}
-
-	memcpy(start + sizeof(struct ip_comp_hdr), scratch, dlen);
-	put_cpu();
-
-	pskb_trim(skb, dlen + sizeof(struct ip_comp_hdr));
-	return 0;
-
-out:
-	put_cpu();
-	return err;
-}
-
-static int ipcomp_output(struct xfrm_state *x, struct sk_buff *skb)
-{
-	int err;
-	struct ip_comp_hdr *ipch;
-	struct ipcomp_data *ipcd = x->data;
-
-	if (skb->len < ipcd->threshold) {
-		/* Don't bother compressing */
-		goto out_ok;
-	}
-
-	if (skb_linearize_cow(skb))
-		goto out_ok;
-
-	err = ipcomp_compress(x, skb);
-
-	if (err) {
-		goto out_ok;
-	}
-
-	/* Install ipcomp header, convert into ipcomp datagram. */
-	ipch = ip_comp_hdr(skb);
-	ipch->nexthdr = *skb_mac_header(skb);
-	ipch->flags = 0;
-	ipch->cpi = htons((u16 )ntohl(x->id.spi));
-	*skb_mac_header(skb) = IPPROTO_COMP;
-out_ok:
-	skb_push(skb, -skb_network_offset(skb));
-	return 0;
-}
+#include <net/sock.h>
 
 static void ipcomp4_err(struct sk_buff *skb, u32 info)
 {
@@ -241,156 +102,12 @@ out:
 	return err;
 }
 
-static void ipcomp_free_scratches(void)
-{
-	int i;
-	void **scratches;
-
-	if (--ipcomp_scratch_users)
-		return;
-
-	scratches = ipcomp_scratches;
-	if (!scratches)
-		return;
-
-	for_each_possible_cpu(i)
-		vfree(*per_cpu_ptr(scratches, i));
-
-	free_percpu(scratches);
-}
-
-static void **ipcomp_alloc_scratches(void)
-{
-	int i;
-	void **scratches;
-
-	if (ipcomp_scratch_users++)
-		return ipcomp_scratches;
-
-	scratches = alloc_percpu(void *);
-	if (!scratches)
-		return NULL;
-
-	ipcomp_scratches = scratches;
-
-	for_each_possible_cpu(i) {
-		void *scratch = vmalloc(IPCOMP_SCRATCH_SIZE);
-		if (!scratch)
-			return NULL;
-		*per_cpu_ptr(scratches, i) = scratch;
-	}
-
-	return scratches;
-}
-
-static void ipcomp_free_tfms(struct crypto_comp **tfms)
-{
-	struct ipcomp_tfms *pos;
-	int cpu;
-
-	list_for_each_entry(pos, &ipcomp_tfms_list, list) {
-		if (pos->tfms == tfms)
-			break;
-	}
-
-	BUG_TRAP(pos);
-
-	if (--pos->users)
-		return;
-
-	list_del(&pos->list);
-	kfree(pos);
-
-	if (!tfms)
-		return;
-
-	for_each_possible_cpu(cpu) {
-		struct crypto_comp *tfm = *per_cpu_ptr(tfms, cpu);
-		crypto_free_comp(tfm);
-	}
-	free_percpu(tfms);
-}
-
-static struct crypto_comp **ipcomp_alloc_tfms(const char *alg_name)
-{
-	struct ipcomp_tfms *pos;
-	struct crypto_comp **tfms;
-	int cpu;
-
-	/* This can be any valid CPU ID so we don't need locking. */
-	cpu = raw_smp_processor_id();
-
-	list_for_each_entry(pos, &ipcomp_tfms_list, list) {
-		struct crypto_comp *tfm;
-
-		tfms = pos->tfms;
-		tfm = *per_cpu_ptr(tfms, cpu);
-
-		if (!strcmp(crypto_comp_name(tfm), alg_name)) {
-			pos->users++;
-			return tfms;
-		}
-	}
-
-	pos = kmalloc(sizeof(*pos), GFP_KERNEL);
-	if (!pos)
-		return NULL;
-
-	pos->users = 1;
-	INIT_LIST_HEAD(&pos->list);
-	list_add(&pos->list, &ipcomp_tfms_list);
-
-	pos->tfms = tfms = alloc_percpu(struct crypto_comp *);
-	if (!tfms)
-		goto error;
-
-	for_each_possible_cpu(cpu) {
-		struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
-							    CRYPTO_ALG_ASYNC);
-		if (IS_ERR(tfm))
-			goto error;
-		*per_cpu_ptr(tfms, cpu) = tfm;
-	}
-
-	return tfms;
-
-error:
-	ipcomp_free_tfms(tfms);
-	return NULL;
-}
-
-static void ipcomp_free_data(struct ipcomp_data *ipcd)
-{
-	if (ipcd->tfms)
-		ipcomp_free_tfms(ipcd->tfms);
-	ipcomp_free_scratches();
-}
-
-static void ipcomp_destroy(struct xfrm_state *x)
-{
-	struct ipcomp_data *ipcd = x->data;
-	if (!ipcd)
-		return;
-	xfrm_state_delete_tunnel(x);
-	mutex_lock(&ipcomp_resource_mutex);
-	ipcomp_free_data(ipcd);
-	mutex_unlock(&ipcomp_resource_mutex);
-	kfree(ipcd);
-}
-
-static int ipcomp_init_state(struct xfrm_state *x)
+static int ipcomp4_init_state(struct xfrm_state *x)
 {
 	int err;
 	struct ipcomp_data *ipcd;
 	struct xfrm_algo_desc *calg_desc;
 
-	err = -EINVAL;
-	if (!x->calg)
-		goto out;
-
-	if (x->encap)
-		goto out;
-
 	x->props.header_len = 0;
 	switch (x->props.mode) {
 	case XFRM_MODE_TRANSPORT:
@@ -402,40 +119,22 @@ static int ipcomp_init_state(struct xfrm_state *x)
 		goto out;
 	}
 
-	err = -ENOMEM;
-	ipcd = kzalloc(sizeof(*ipcd), GFP_KERNEL);
-	if (!ipcd)
+	err = ipcomp_init_state(x);
+	if (err)
 		goto out;
 
-	mutex_lock(&ipcomp_resource_mutex);
-	if (!ipcomp_alloc_scratches())
-		goto error;
-
-	ipcd->tfms = ipcomp_alloc_tfms(x->calg->alg_name);
-	if (!ipcd->tfms)
-		goto error;
-	mutex_unlock(&ipcomp_resource_mutex);
-
 	if (x->props.mode == XFRM_MODE_TUNNEL) {
 		err = ipcomp_tunnel_attach(x);
 		if (err)
 			goto error_tunnel;
 	}
 
-	calg_desc = xfrm_calg_get_byname(x->calg->alg_name, 0);
-	BUG_ON(!calg_desc);
-	ipcd->threshold = calg_desc->uinfo.comp.threshold;
-	x->data = ipcd;
 	err = 0;
 out:
 	return err;
 
 error_tunnel:
-	mutex_lock(&ipcomp_resource_mutex);
-error:
-	ipcomp_free_data(ipcd);
-	mutex_unlock(&ipcomp_resource_mutex);
-	kfree(ipcd);
+	ipcomp_destroy(x);
 	goto out;
 }
 
@@ -443,7 +142,7 @@ static const struct xfrm_type ipcomp_type = {
 	.description	= "IPCOMP4",
 	.owner		= THIS_MODULE,
 	.proto	     	= IPPROTO_COMP,
-	.init_state	= ipcomp_init_state,
+	.init_state	= ipcomp4_init_state,
 	.destructor	= ipcomp_destroy,
 	.input		= ipcomp_input,
 	.output		= ipcomp_output
@@ -481,7 +180,7 @@ module_init(ipcomp4_init);
 module_exit(ipcomp4_fini);
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("IP Payload Compression Protocol (IPComp) - RFC3173");
+MODULE_DESCRIPTION("IP Payload Compression Protocol (IPComp/IPv4) - RFC3173");
 MODULE_AUTHOR("James Morris <jmorris@intercode.com.au>");
 
 MODULE_ALIAS_XFRM_TYPE(AF_INET, XFRM_PROTO_COMP);
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index 42814a2ec9d..ec992159b5f 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -96,10 +96,8 @@ config INET6_ESP
 
 config INET6_IPCOMP
 	tristate "IPv6: IPComp transformation"
-	select XFRM
 	select INET6_XFRM_TUNNEL
-	select CRYPTO
-	select CRYPTO_DEFLATE
+	select XFRM_IPCOMP
 	---help---
 	  Support for IP Payload Compression Protocol (IPComp) (RFC3173),
 	  typically needed for IPsec.
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index ee6de425ce6..0cfcea42153 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -50,125 +50,6 @@
 #include <linux/icmpv6.h>
 #include <linux/mutex.h>
 
-struct ipcomp6_tfms {
-	struct list_head list;
-	struct crypto_comp **tfms;
-	int users;
-};
-
-static DEFINE_MUTEX(ipcomp6_resource_mutex);
-static void **ipcomp6_scratches;
-static int ipcomp6_scratch_users;
-static LIST_HEAD(ipcomp6_tfms_list);
-
-static int ipcomp6_input(struct xfrm_state *x, struct sk_buff *skb)
-{
-	int nexthdr;
-	int err = -ENOMEM;
-	struct ip_comp_hdr *ipch;
-	int plen, dlen;
-	struct ipcomp_data *ipcd = x->data;
-	u8 *start, *scratch;
-	struct crypto_comp *tfm;
-	int cpu;
-
-	if (skb_linearize_cow(skb))
-		goto out;
-
-	skb->ip_summed = CHECKSUM_NONE;
-
-	/* Remove ipcomp header and decompress original payload */
-	ipch = (void *)skb->data;
-	nexthdr = ipch->nexthdr;
-
-	skb->transport_header = skb->network_header + sizeof(*ipch);
-	__skb_pull(skb, sizeof(*ipch));
-
-	/* decompression */
-	plen = skb->len;
-	dlen = IPCOMP_SCRATCH_SIZE;
-	start = skb->data;
-
-	cpu = get_cpu();
-	scratch = *per_cpu_ptr(ipcomp6_scratches, cpu);
-	tfm = *per_cpu_ptr(ipcd->tfms, cpu);
-
-	err = crypto_comp_decompress(tfm, start, plen, scratch, &dlen);
-	if (err)
-		goto out_put_cpu;
-
-	if (dlen < (plen + sizeof(*ipch))) {
-		err = -EINVAL;
-		goto out_put_cpu;
-	}
-
-	err = pskb_expand_head(skb, 0, dlen - plen, GFP_ATOMIC);
-	if (err) {
-		goto out_put_cpu;
-	}
-
-	skb->truesize += dlen - plen;
-	__skb_put(skb, dlen - plen);
-	skb_copy_to_linear_data(skb, scratch, dlen);
-	err = nexthdr;
-
-out_put_cpu:
-	put_cpu();
-out:
-	return err;
-}
-
-static int ipcomp6_output(struct xfrm_state *x, struct sk_buff *skb)
-{
-	int err;
-	struct ip_comp_hdr *ipch;
-	struct ipcomp_data *ipcd = x->data;
-	int plen, dlen;
-	u8 *start, *scratch;
-	struct crypto_comp *tfm;
-	int cpu;
-
-	/* check whether datagram len is larger than threshold */
-	if (skb->len < ipcd->threshold) {
-		goto out_ok;
-	}
-
-	if (skb_linearize_cow(skb))
-		goto out_ok;
-
-	/* compression */
-	plen = skb->len;
-	dlen = IPCOMP_SCRATCH_SIZE;
-	start = skb->data;
-
-	cpu = get_cpu();
-	scratch = *per_cpu_ptr(ipcomp6_scratches, cpu);
-	tfm = *per_cpu_ptr(ipcd->tfms, cpu);
-
-	local_bh_disable();
-	err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
-	local_bh_enable();
-	if (err || (dlen + sizeof(*ipch)) >= plen) {
-		put_cpu();
-		goto out_ok;
-	}
-	memcpy(start + sizeof(struct ip_comp_hdr), scratch, dlen);
-	put_cpu();
-	pskb_trim(skb, dlen + sizeof(struct ip_comp_hdr));
-
-	/* insert ipcomp header and replace datagram */
-	ipch = ip_comp_hdr(skb);
-	ipch->nexthdr = *skb_mac_header(skb);
-	ipch->flags = 0;
-	ipch->cpi = htons((u16 )ntohl(x->id.spi));
-	*skb_mac_header(skb) = IPPROTO_COMP;
-
-out_ok:
-	skb_push(skb, -skb_network_offset(skb));
-
-	return 0;
-}
-
 static void ipcomp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 				int type, int code, int offset, __be32 info)
 {
@@ -251,161 +132,12 @@ out:
 	return err;
 }
 
-static void ipcomp6_free_scratches(void)
-{
-	int i;
-	void **scratches;
-
-	if (--ipcomp6_scratch_users)
-		return;
-
-	scratches = ipcomp6_scratches;
-	if (!scratches)
-		return;
-
-	for_each_possible_cpu(i) {
-		void *scratch = *per_cpu_ptr(scratches, i);
-
-		vfree(scratch);
-	}
-
-	free_percpu(scratches);
-}
-
-static void **ipcomp6_alloc_scratches(void)
-{
-	int i;
-	void **scratches;
-
-	if (ipcomp6_scratch_users++)
-		return ipcomp6_scratches;
-
-	scratches = alloc_percpu(void *);
-	if (!scratches)
-		return NULL;
-
-	ipcomp6_scratches = scratches;
-
-	for_each_possible_cpu(i) {
-		void *scratch = vmalloc(IPCOMP_SCRATCH_SIZE);
-		if (!scratch)
-			return NULL;
-		*per_cpu_ptr(scratches, i) = scratch;
-	}
-
-	return scratches;
-}
-
-static void ipcomp6_free_tfms(struct crypto_comp **tfms)
-{
-	struct ipcomp6_tfms *pos;
-	int cpu;
-
-	list_for_each_entry(pos, &ipcomp6_tfms_list, list) {
-		if (pos->tfms == tfms)
-			break;
-	}
-
-	BUG_TRAP(pos);
-
-	if (--pos->users)
-		return;
-
-	list_del(&pos->list);
-	kfree(pos);
-
-	if (!tfms)
-		return;
-
-	for_each_possible_cpu(cpu) {
-		struct crypto_comp *tfm = *per_cpu_ptr(tfms, cpu);
-		crypto_free_comp(tfm);
-	}
-	free_percpu(tfms);
-}
-
-static struct crypto_comp **ipcomp6_alloc_tfms(const char *alg_name)
-{
-	struct ipcomp6_tfms *pos;
-	struct crypto_comp **tfms;
-	int cpu;
-
-	/* This can be any valid CPU ID so we don't need locking. */
-	cpu = raw_smp_processor_id();
-
-	list_for_each_entry(pos, &ipcomp6_tfms_list, list) {
-		struct crypto_comp *tfm;
-
-		tfms = pos->tfms;
-		tfm = *per_cpu_ptr(tfms, cpu);
-
-		if (!strcmp(crypto_comp_name(tfm), alg_name)) {
-			pos->users++;
-			return tfms;
-		}
-	}
-
-	pos = kmalloc(sizeof(*pos), GFP_KERNEL);
-	if (!pos)
-		return NULL;
-
-	pos->users = 1;
-	INIT_LIST_HEAD(&pos->list);
-	list_add(&pos->list, &ipcomp6_tfms_list);
-
-	pos->tfms = tfms = alloc_percpu(struct crypto_comp *);
-	if (!tfms)
-		goto error;
-
-	for_each_possible_cpu(cpu) {
-		struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
-							    CRYPTO_ALG_ASYNC);
-		if (IS_ERR(tfm))
-			goto error;
-		*per_cpu_ptr(tfms, cpu) = tfm;
-	}
-
-	return tfms;
-
-error:
-	ipcomp6_free_tfms(tfms);
-	return NULL;
-}
-
-static void ipcomp6_free_data(struct ipcomp_data *ipcd)
-{
-	if (ipcd->tfms)
-		ipcomp6_free_tfms(ipcd->tfms);
-	ipcomp6_free_scratches();
-}
-
-static void ipcomp6_destroy(struct xfrm_state *x)
-{
-	struct ipcomp_data *ipcd = x->data;
-	if (!ipcd)
-		return;
-	xfrm_state_delete_tunnel(x);
-	mutex_lock(&ipcomp6_resource_mutex);
-	ipcomp6_free_data(ipcd);
-	mutex_unlock(&ipcomp6_resource_mutex);
-	kfree(ipcd);
-
-	xfrm6_tunnel_free_spi((xfrm_address_t *)&x->props.saddr);
-}
-
 static int ipcomp6_init_state(struct xfrm_state *x)
 {
 	int err;
 	struct ipcomp_data *ipcd;
 	struct xfrm_algo_desc *calg_desc;
 
-	err = -EINVAL;
-	if (!x->calg)
-		goto out;
-
-	if (x->encap)
-		goto out;
-
 	x->props.header_len = 0;
 	switch (x->props.mode) {
 	case XFRM_MODE_TRANSPORT:
@@ -417,39 +149,21 @@ static int ipcomp6_init_state(struct xfrm_state *x)
 		goto out;
 	}
 
-	err = -ENOMEM;
-	ipcd = kzalloc(sizeof(*ipcd), GFP_KERNEL);
-	if (!ipcd)
+	err = ipcomp_init_state(x);
+	if (err)
 		goto out;
 
-	mutex_lock(&ipcomp6_resource_mutex);
-	if (!ipcomp6_alloc_scratches())
-		goto error;
-
-	ipcd->tfms = ipcomp6_alloc_tfms(x->calg->alg_name);
-	if (!ipcd->tfms)
-		goto error;
-	mutex_unlock(&ipcomp6_resource_mutex);
-
 	if (x->props.mode == XFRM_MODE_TUNNEL) {
 		err = ipcomp6_tunnel_attach(x);
 		if (err)
 			goto error_tunnel;
 	}
 
-	calg_desc = xfrm_calg_get_byname(x->calg->alg_name, 0);
-	BUG_ON(!calg_desc);
-	ipcd->threshold = calg_desc->uinfo.comp.threshold;
-	x->data = ipcd;
 	err = 0;
 out:
 	return err;
 error_tunnel:
-	mutex_lock(&ipcomp6_resource_mutex);
-error:
-	ipcomp6_free_data(ipcd);
-	mutex_unlock(&ipcomp6_resource_mutex);
-	kfree(ipcd);
+	ipcomp_destroy(x);
 
 	goto out;
 }
@@ -460,9 +174,9 @@ static const struct xfrm_type ipcomp6_type =
 	.owner		= THIS_MODULE,
 	.proto		= IPPROTO_COMP,
 	.init_state	= ipcomp6_init_state,
-	.destructor	= ipcomp6_destroy,
-	.input		= ipcomp6_input,
-	.output		= ipcomp6_output,
+	.destructor	= ipcomp_destroy,
+	.input		= ipcomp_input,
+	.output		= ipcomp_output,
 	.hdr_offset	= xfrm6_find_1stfragopt,
 };
 
diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig
index 9201ef8ad90..6d081674515 100644
--- a/net/xfrm/Kconfig
+++ b/net/xfrm/Kconfig
@@ -46,6 +46,12 @@ config XFRM_STATISTICS
 
 	  If unsure, say N.
 
+config XFRM_IPCOMP
+	tristate
+	select XFRM
+	select CRYPTO
+	select CRYPTO_DEFLATE
+
 config NET_KEY
 	tristate "PF_KEY sockets"
 	select XFRM
diff --git a/net/xfrm/Makefile b/net/xfrm/Makefile
index 332cfb0ff56..0f439a72cca 100644
--- a/net/xfrm/Makefile
+++ b/net/xfrm/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_XFRM) := xfrm_policy.o xfrm_state.o xfrm_hash.o \
 		      xfrm_input.o xfrm_output.o xfrm_algo.o
 obj-$(CONFIG_XFRM_STATISTICS) += xfrm_proc.o
 obj-$(CONFIG_XFRM_USER) += xfrm_user.o
+obj-$(CONFIG_XFRM_IPCOMP) += xfrm_ipcomp.o
 
diff --git a/net/xfrm/xfrm_ipcomp.c b/net/xfrm/xfrm_ipcomp.c
new file mode 100644
index 00000000000..b51e804fbba
--- /dev/null
+++ b/net/xfrm/xfrm_ipcomp.c
@@ -0,0 +1,349 @@
+/*
+ * IP Payload Compression Protocol (IPComp) - RFC3173.
+ *
+ * Copyright (c) 2003 James Morris <jmorris@intercode.com.au>
+ * Copyright (c) 2003-2008 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * Todo:
+ *   - Tunable compression parameters.
+ *   - Compression stats.
+ *   - Adaptive compression.
+ */
+
+#include <linux/crypto.h>
+#include <linux/err.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/percpu.h>
+#include <linux/rtnetlink.h>
+#include <linux/smp.h>
+#include <linux/vmalloc.h>
+#include <net/ip.h>
+#include <net/ipcomp.h>
+#include <net/xfrm.h>
+
+struct ipcomp_tfms {
+	struct list_head list;
+	struct crypto_comp **tfms;
+	int users;
+};
+
+static DEFINE_MUTEX(ipcomp_resource_mutex);
+static void **ipcomp_scratches;
+static int ipcomp_scratch_users;
+static LIST_HEAD(ipcomp_tfms_list);
+
+static int ipcomp_decompress(struct xfrm_state *x, struct sk_buff *skb)
+{
+	struct ipcomp_data *ipcd = x->data;
+	const int plen = skb->len;
+	int dlen = IPCOMP_SCRATCH_SIZE;
+	const u8 *start = skb->data;
+	const int cpu = get_cpu();
+	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
+	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
+	int err = crypto_comp_decompress(tfm, start, plen, scratch, &dlen);
+
+	if (err)
+		goto out;
+
+	if (dlen < (plen + sizeof(struct ip_comp_hdr))) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	err = pskb_expand_head(skb, 0, dlen - plen, GFP_ATOMIC);
+	if (err)
+		goto out;
+
+	skb->truesize += dlen - plen;
+	__skb_put(skb, dlen - plen);
+	skb_copy_to_linear_data(skb, scratch, dlen);
+out:
+	put_cpu();
+	return err;
+}
+
+int ipcomp_input(struct xfrm_state *x, struct sk_buff *skb)
+{
+	int nexthdr;
+	int err = -ENOMEM;
+	struct ip_comp_hdr *ipch;
+
+	if (skb_linearize_cow(skb))
+		goto out;
+
+	skb->ip_summed = CHECKSUM_NONE;
+
+	/* Remove ipcomp header and decompress original payload */
+	ipch = (void *)skb->data;
+	nexthdr = ipch->nexthdr;
+
+	skb->transport_header = skb->network_header + sizeof(*ipch);
+	__skb_pull(skb, sizeof(*ipch));
+	err = ipcomp_decompress(x, skb);
+	if (err)
+		goto out;
+
+	err = nexthdr;
+
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(ipcomp_input);
+
+static int ipcomp_compress(struct xfrm_state *x, struct sk_buff *skb)
+{
+	struct ipcomp_data *ipcd = x->data;
+	const int plen = skb->len;
+	int dlen = IPCOMP_SCRATCH_SIZE;
+	u8 *start = skb->data;
+	const int cpu = get_cpu();
+	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
+	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
+	int err;
+
+	local_bh_disable();
+	err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
+	local_bh_enable();
+	if (err)
+		goto out;
+
+	if ((dlen + sizeof(struct ip_comp_hdr)) >= plen) {
+		err = -EMSGSIZE;
+		goto out;
+	}
+
+	memcpy(start + sizeof(struct ip_comp_hdr), scratch, dlen);
+	put_cpu();
+
+	pskb_trim(skb, dlen + sizeof(struct ip_comp_hdr));
+	return 0;
+
+out:
+	put_cpu();
+	return err;
+}
+
+int ipcomp_output(struct xfrm_state *x, struct sk_buff *skb)
+{
+	int err;
+	struct ip_comp_hdr *ipch;
+	struct ipcomp_data *ipcd = x->data;
+
+	if (skb->len < ipcd->threshold) {
+		/* Don't bother compressing */
+		goto out_ok;
+	}
+
+	if (skb_linearize_cow(skb))
+		goto out_ok;
+
+	err = ipcomp_compress(x, skb);
+
+	if (err) {
+		goto out_ok;
+	}
+
+	/* Install ipcomp header, convert into ipcomp datagram. */
+	ipch = ip_comp_hdr(skb);
+	ipch->nexthdr = *skb_mac_header(skb);
+	ipch->flags = 0;
+	ipch->cpi = htons((u16 )ntohl(x->id.spi));
+	*skb_mac_header(skb) = IPPROTO_COMP;
+out_ok:
+	skb_push(skb, -skb_network_offset(skb));
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipcomp_output);
+
+static void ipcomp_free_scratches(void)
+{
+	int i;
+	void **scratches;
+
+	if (--ipcomp_scratch_users)
+		return;
+
+	scratches = ipcomp_scratches;
+	if (!scratches)
+		return;
+
+	for_each_possible_cpu(i)
+		vfree(*per_cpu_ptr(scratches, i));
+
+	free_percpu(scratches);
+}
+
+static void **ipcomp_alloc_scratches(void)
+{
+	int i;
+	void **scratches;
+
+	if (ipcomp_scratch_users++)
+		return ipcomp_scratches;
+
+	scratches = alloc_percpu(void *);
+	if (!scratches)
+		return NULL;
+
+	ipcomp_scratches = scratches;
+
+	for_each_possible_cpu(i) {
+		void *scratch = vmalloc(IPCOMP_SCRATCH_SIZE);
+		if (!scratch)
+			return NULL;
+		*per_cpu_ptr(scratches, i) = scratch;
+	}
+
+	return scratches;
+}
+
+static void ipcomp_free_tfms(struct crypto_comp **tfms)
+{
+	struct ipcomp_tfms *pos;
+	int cpu;
+
+	list_for_each_entry(pos, &ipcomp_tfms_list, list) {
+		if (pos->tfms == tfms)
+			break;
+	}
+
+	BUG_TRAP(pos);
+
+	if (--pos->users)
+		return;
+
+	list_del(&pos->list);
+	kfree(pos);
+
+	if (!tfms)
+		return;
+
+	for_each_possible_cpu(cpu) {
+		struct crypto_comp *tfm = *per_cpu_ptr(tfms, cpu);
+		crypto_free_comp(tfm);
+	}
+	free_percpu(tfms);
+}
+
+static struct crypto_comp **ipcomp_alloc_tfms(const char *alg_name)
+{
+	struct ipcomp_tfms *pos;
+	struct crypto_comp **tfms;
+	int cpu;
+
+	/* This can be any valid CPU ID so we don't need locking. */
+	cpu = raw_smp_processor_id();
+
+	list_for_each_entry(pos, &ipcomp_tfms_list, list) {
+		struct crypto_comp *tfm;
+
+		tfms = pos->tfms;
+		tfm = *per_cpu_ptr(tfms, cpu);
+
+		if (!strcmp(crypto_comp_name(tfm), alg_name)) {
+			pos->users++;
+			return tfms;
+		}
+	}
+
+	pos = kmalloc(sizeof(*pos), GFP_KERNEL);
+	if (!pos)
+		return NULL;
+
+	pos->users = 1;
+	INIT_LIST_HEAD(&pos->list);
+	list_add(&pos->list, &ipcomp_tfms_list);
+
+	pos->tfms = tfms = alloc_percpu(struct crypto_comp *);
+	if (!tfms)
+		goto error;
+
+	for_each_possible_cpu(cpu) {
+		struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
+							    CRYPTO_ALG_ASYNC);
+		if (IS_ERR(tfm))
+			goto error;
+		*per_cpu_ptr(tfms, cpu) = tfm;
+	}
+
+	return tfms;
+
+error:
+	ipcomp_free_tfms(tfms);
+	return NULL;
+}
+
+static void ipcomp_free_data(struct ipcomp_data *ipcd)
+{
+	if (ipcd->tfms)
+		ipcomp_free_tfms(ipcd->tfms);
+	ipcomp_free_scratches();
+}
+
+void ipcomp_destroy(struct xfrm_state *x)
+{
+	struct ipcomp_data *ipcd = x->data;
+	if (!ipcd)
+		return;
+	xfrm_state_delete_tunnel(x);
+	mutex_lock(&ipcomp_resource_mutex);
+	ipcomp_free_data(ipcd);
+	mutex_unlock(&ipcomp_resource_mutex);
+	kfree(ipcd);
+}
+EXPORT_SYMBOL_GPL(ipcomp_destroy);
+
+int ipcomp_init_state(struct xfrm_state *x)
+{
+	int err;
+	struct ipcomp_data *ipcd;
+	struct xfrm_algo_desc *calg_desc;
+
+	err = -EINVAL;
+	if (!x->calg)
+		goto out;
+
+	if (x->encap)
+		goto out;
+
+	err = -ENOMEM;
+	ipcd = kzalloc(sizeof(*ipcd), GFP_KERNEL);
+	if (!ipcd)
+		goto out;
+
+	mutex_lock(&ipcomp_resource_mutex);
+	if (!ipcomp_alloc_scratches())
+		goto error;
+
+	ipcd->tfms = ipcomp_alloc_tfms(x->calg->alg_name);
+	if (!ipcd->tfms)
+		goto error;
+	mutex_unlock(&ipcomp_resource_mutex);
+
+	calg_desc = xfrm_calg_get_byname(x->calg->alg_name, 0);
+	BUG_ON(!calg_desc);
+	ipcd->threshold = calg_desc->uinfo.comp.threshold;
+	x->data = ipcd;
+	err = 0;
+out:
+	return err;
+
+error:
+	ipcomp_free_data(ipcd);
+	mutex_unlock(&ipcomp_resource_mutex);
+	kfree(ipcd);
+	goto out;
+}
+EXPORT_SYMBOL_GPL(ipcomp_init_state);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("IP Payload Compression Protocol (IPComp) - RFC3173");
+MODULE_AUTHOR("James Morris <jmorris@intercode.com.au>");
-- 
cgit v1.2.3


From 7d7e5a60c62e88cb8782760bb6c4d3bd1577a6c6 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 25 Jul 2008 02:55:33 -0700
Subject: ipsec: ipcomp - Decompress into frags if necessary

When decompressing extremely large packets allocating them through
kmalloc is prone to failure.  Therefore it's better to use page
frags instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/xfrm/xfrm_ipcomp.c | 48 ++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 42 insertions(+), 6 deletions(-)

diff --git a/net/xfrm/xfrm_ipcomp.c b/net/xfrm/xfrm_ipcomp.c
index b51e804fbba..800f669083f 100644
--- a/net/xfrm/xfrm_ipcomp.c
+++ b/net/xfrm/xfrm_ipcomp.c
@@ -17,6 +17,7 @@
 
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <linux/gfp.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -49,6 +50,7 @@ static int ipcomp_decompress(struct xfrm_state *x, struct sk_buff *skb)
 	u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
 	struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
 	int err = crypto_comp_decompress(tfm, start, plen, scratch, &dlen);
+	int len;
 
 	if (err)
 		goto out;
@@ -58,13 +60,47 @@ static int ipcomp_decompress(struct xfrm_state *x, struct sk_buff *skb)
 		goto out;
 	}
 
-	err = pskb_expand_head(skb, 0, dlen - plen, GFP_ATOMIC);
-	if (err)
-		goto out;
+	len = dlen - plen;
+	if (len > skb_tailroom(skb))
+		len = skb_tailroom(skb);
+
+	skb->truesize += len;
+	__skb_put(skb, len);
+
+	len += plen;
+	skb_copy_to_linear_data(skb, scratch, len);
+
+	while ((scratch += len, dlen -= len) > 0) {
+		skb_frag_t *frag;
+
+		err = -EMSGSIZE;
+		if (WARN_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS))
+			goto out;
+
+		frag = skb_shinfo(skb)->frags + skb_shinfo(skb)->nr_frags;
+		frag->page = alloc_page(GFP_ATOMIC);
+
+		err = -ENOMEM;
+		if (!frag->page)
+			goto out;
+
+		len = PAGE_SIZE;
+		if (dlen < len)
+			len = dlen;
+
+		memcpy(page_address(frag->page), scratch, len);
+
+		frag->page_offset = 0;
+		frag->size = len;
+		skb->truesize += len;
+		skb->data_len += len;
+		skb->len += len;
+
+		skb_shinfo(skb)->nr_frags++;
+	}
+
+	err = 0;
 
-	skb->truesize += dlen - plen;
-	__skb_put(skb, dlen - plen);
-	skb_copy_to_linear_data(skb, scratch, dlen);
 out:
 	put_cpu();
 	return err;
-- 
cgit v1.2.3


From 56d3eef2b49b06618981c87edba16a607bf10ddd Mon Sep 17 00:00:00 2001
From: "Voss, Nikolaus" <N.Voss@weinmann.de>
Date: Fri, 18 Jul 2008 14:44:48 +0200
Subject: avr32: allow system timer to share interrupt to make OProfile work

The following patch allows the avr32_comparator interrupt to be shared.
This is necessary as the avr32 oprofile driver shares the irq group 0
with the timer.

To make OProfile actually work on AVR32, a small patch for oprofiled is
also needed (posted to the oprofile mailing list).

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
[haavard.skinnemoen@atmel.com: set IRQF_SHARED unconditionally]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/time.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index abd954fb7ba..7e7f32771ae 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -43,6 +43,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evdev = dev_id;
 
+	if (unlikely(!(intc_get_pending(0) & 1)))
+		return IRQ_NONE;
+
 	/*
 	 * Disable the interrupt until the clockevent subsystem
 	 * reprograms it.
@@ -55,7 +58,8 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	/* Oprofile uses the same irq as the timer, so allow it to be shared */
+	.flags		= IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED,
 	.name		= "avr32_comparator",
 };
 
-- 
cgit v1.2.3


From 95984f62c9b0bf6d89ef4f514b1afe73623481de Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Tue, 22 Jul 2008 18:41:10 +0200
Subject: firewire: fw-ohci: TSB43AB22/A dualbuffer workaround

Isochronous reception in dualbuffer mode is reportedly broken with
TI TSB43AB22A on x86-64.  Descriptor addresses above 2G have been
determined as the trigger:
https://bugzilla.redhat.com/show_bug.cgi?id=435550

Two fixes are possible:
  - pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK);
    at least when IR descriptors are allocated, or
  - simply don't use dualbuffer.
This fix implements the latter workaround.

But we keep using dualbuffer on x86-32 which won't give us highmen (and
thus physical addresses outside the 31bit range) in coherent DMA memory
allocations.  Right now we could for example also whitelist PPC32, but
DMA mapping implementation details are expected to change there.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
---
 drivers/firewire/fw-ohci.c | 37 ++++++++++++++++++++++++-------------
 include/linux/pci_ids.h    |  1 +
 2 files changed, 25 insertions(+), 13 deletions(-)

diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 333b12544dd..a4eff32621b 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -171,7 +171,6 @@ struct iso_context {
 struct fw_ohci {
 	struct fw_card card;
 
-	u32 version;
 	__iomem char *registers;
 	dma_addr_t self_id_bus;
 	__le32 *self_id_cpu;
@@ -180,6 +179,8 @@ struct fw_ohci {
 	int generation;
 	int request_generation;	/* for timestamping incoming requests */
 	u32 bus_seconds;
+
+	bool use_dualbuffer;
 	bool old_uninorth;
 	bool bus_reset_packet_quirk;
 
@@ -1885,7 +1886,7 @@ ohci_allocate_iso_context(struct fw_card *card, int type, size_t header_size)
 	} else {
 		mask = &ohci->ir_context_mask;
 		list = ohci->ir_context_list;
-		if (ohci->version >= OHCI_VERSION_1_1)
+		if (ohci->use_dualbuffer)
 			callback = handle_ir_dualbuffer_packet;
 		else
 			callback = handle_ir_packet_per_buffer;
@@ -1949,7 +1950,7 @@ static int ohci_start_iso(struct fw_iso_context *base,
 	} else {
 		index = ctx - ohci->ir_context_list;
 		control = IR_CONTEXT_ISOCH_HEADER;
-		if (ohci->version >= OHCI_VERSION_1_1)
+		if (ohci->use_dualbuffer)
 			control |= IR_CONTEXT_DUAL_BUFFER_MODE;
 		match = (tags << 28) | (sync << 8) | ctx->base.channel;
 		if (cycle >= 0) {
@@ -2279,7 +2280,7 @@ ohci_queue_iso(struct fw_iso_context *base,
 	spin_lock_irqsave(&ctx->context.ohci->lock, flags);
 	if (base->type == FW_ISO_CONTEXT_TRANSMIT)
 		retval = ohci_queue_iso_transmit(base, packet, buffer, payload);
-	else if (ctx->context.ohci->version >= OHCI_VERSION_1_1)
+	else if (ctx->context.ohci->use_dualbuffer)
 		retval = ohci_queue_iso_receive_dualbuffer(base, packet,
 							 buffer, payload);
 	else
@@ -2341,7 +2342,7 @@ static int __devinit
 pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 {
 	struct fw_ohci *ohci;
-	u32 bus_options, max_receive, link_speed;
+	u32 bus_options, max_receive, link_speed, version;
 	u64 guid;
 	int err;
 	size_t size;
@@ -2366,12 +2367,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
 	pci_set_drvdata(dev, ohci);
 
-#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
-	ohci->old_uninorth = dev->vendor == PCI_VENDOR_ID_APPLE &&
-			     dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW;
-#endif
-	ohci->bus_reset_packet_quirk = dev->vendor == PCI_VENDOR_ID_TI;
-
 	spin_lock_init(&ohci->lock);
 
 	tasklet_init(&ohci->bus_reset_tasklet,
@@ -2390,6 +2385,23 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 		goto fail_iomem;
 	}
 
+	version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
+	ohci->use_dualbuffer = version >= OHCI_VERSION_1_1;
+
+/* x86-32 currently doesn't use highmem for dma_alloc_coherent */
+#if !defined(CONFIG_X86_32)
+	/* dual-buffer mode is broken with descriptor addresses above 2G */
+	if (dev->vendor == PCI_VENDOR_ID_TI &&
+	    dev->device == PCI_DEVICE_ID_TI_TSB43AB22)
+		ohci->use_dualbuffer = false;
+#endif
+
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
+	ohci->old_uninorth = dev->vendor == PCI_VENDOR_ID_APPLE &&
+			     dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW;
+#endif
+	ohci->bus_reset_packet_quirk = dev->vendor == PCI_VENDOR_ID_TI;
+
 	ar_context_init(&ohci->ar_request_ctx, ohci,
 			OHCI1394_AsReqRcvContextControlSet);
 
@@ -2441,9 +2453,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	if (err < 0)
 		goto fail_self_id;
 
-	ohci->version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
 	fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n",
-		  dev->dev.bus_id, ohci->version >> 16, ohci->version & 0xff);
+		  dev->dev.bus_id, version >> 16, version & 0xff);
 	return 0;
 
  fail_self_id:
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 65953822c9c..720d6755410 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -748,6 +748,7 @@
 #define PCI_VENDOR_ID_TI		0x104c
 #define PCI_DEVICE_ID_TI_TVP4020	0x3d07
 #define PCI_DEVICE_ID_TI_4450		0x8011
+#define PCI_DEVICE_ID_TI_TSB43AB22	0x8023
 #define PCI_DEVICE_ID_TI_XX21_XX11	0x8031
 #define PCI_DEVICE_ID_TI_XX21_XX11_FM	0x8033
 #define PCI_DEVICE_ID_TI_XX21_XX11_SD	0x8034
-- 
cgit v1.2.3


From 55679df30dfa37886cd9e22d8dea0e6974a552df Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Mon, 14 Jul 2008 19:20:37 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: fix section mismatch with
 CONFIG_MTD_OF_PARTS=y

With CONFIG_MTD_OF_PARTS=y I'm getting this new section mismatch in reference
from the function fsl_elbc_chip_probe() to the function
.devinit.text:of_mtd_parse_partitions()

This patch fixes the mismatch by providing __devinit annotation to the
fsl_elbc_chip_probe() function.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-By: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index d6d1ff55c4e..9dff51351f4 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -836,8 +836,8 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 	return 0;
 }
 
-static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
-                               struct device_node *node)
+static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
+					 struct device_node *node)
 {
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	struct fsl_elbc_mtd *priv;
-- 
cgit v1.2.3


From 998453fbf2e0709bf65ac419718ad284401b2b4f Mon Sep 17 00:00:00 2001
From: Alexey Korolev <akorolev@infradead.org>
Date: Wed, 16 Jul 2008 15:28:56 +0100
Subject: [MTD] [NOR] Fix -ETIMEO errors in CFI driver

Existing CFI driver has problems with excessive writes during erase.
If CFI driver does many writes during one erase cycle we may face the
messages with -ETIMEO error on erase operation.  It may cause the
following data corruption and kernel panics.

The reason of the issue is related to specifics of suspend operation:
if we write to flash during erase, suspend operation will cost some time
to erase procedure (for P30 it could be significant). In current version of
cfi driver the problem of many suspends is partially workarounded by adding
some time reserv to any operation (8xerase_time) but if we have many writes
during one erase the problem appears.

This patch detects the suspend and resets timer if suspend occured. It
has been well verified on different chips. No problems were found.
Could you please include the patch as it is simple and fixes bad issue.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/chips/cfi_cmdset_0001.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 324ff82a3cd..5f1b472137a 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1149,7 +1149,7 @@ static int inval_cache_and_wait_for_operation(
 	struct cfi_private *cfi = map->fldrv_priv;
 	map_word status, status_OK = CMD(0x80);
 	int chip_state = chip->state;
-	unsigned int timeo, sleep_time;
+	unsigned int timeo, sleep_time, reset_timeo;
 
 	spin_unlock(chip->mutex);
 	if (inval_len)
@@ -1160,6 +1160,7 @@ static int inval_cache_and_wait_for_operation(
 	timeo = chip_op_time * 8;
 	if (!timeo)
 		timeo = 500000;
+	reset_timeo = timeo;
 	sleep_time = chip_op_time / 2;
 
 	for (;;) {
@@ -1201,6 +1202,12 @@ static int inval_cache_and_wait_for_operation(
 			remove_wait_queue(&chip->wq, &wait);
 			spin_lock(chip->mutex);
 		}
+		if (chip->erase_suspended || chip->write_suspended)  {
+			/* Suspend has occured while sleep: reset timeout */
+			timeo = reset_timeo;
+			chip->erase_suspended = 0;
+			chip->write_suspended = 0;
+		}
 	}
 
 	/* Done and happy. */
-- 
cgit v1.2.3


From 7b2491911540e4904498622fbee2e1a9e3120d2f Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <rjarzmik@free.fr>
Date: Tue, 22 Jul 2008 09:39:00 +0200
Subject: [MTD] physmap: Fix suspend/resume/shutdown bugs.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Don't call suspend/resume functions if they have not been
defined.

Signed-off-by: Robert Jarzmik <rjarzmik@free.fr>
Acked-By: Jörn Engel <joern@logfs.org>
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/maps/physmap.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 1f6b9066b63..7c8cdf49deb 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -201,7 +201,8 @@ static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		ret |= info->mtd[i]->suspend(info->mtd[i]);
+		if (info->mtd[i]->suspend)
+			ret |= info->mtd[i]->suspend(info->mtd[i]);
 
 	return ret;
 }
@@ -212,7 +213,8 @@ static int physmap_flash_resume(struct platform_device *dev)
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		info->mtd[i]->resume(info->mtd[i]);
+		if (info->mtd[i]->resume)
+			info->mtd[i]->resume(info->mtd[i]);
 
 	return 0;
 }
@@ -223,8 +225,9 @@ static void physmap_flash_shutdown(struct platform_device *dev)
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		if (info->mtd[i]->suspend(info->mtd[i]) == 0)
-			info->mtd[i]->resume(info->mtd[i]);
+		if (info->mtd[i]->suspend && info->mtd[i]->resume)
+			if (info->mtd[i]->suspend(info->mtd[i]) == 0)
+				info->mtd[i]->resume(info->mtd[i]);
 }
 #else
 #define physmap_flash_suspend NULL
-- 
cgit v1.2.3


From 4b5e33a7bf185c8d8568a807d9805fb155bcedd9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <Uwe.Kleine-Koenig@digi.com>
Date: Tue, 22 Jul 2008 09:39:01 +0200
Subject: [MTD] physmap: resume already suspended chips on failure to suspend
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

A nice side effect of this patch is that the return value of
physmap_flash_suspend in the error path is the value of the first failing
suspend callback and not the bitwise OR of all of them.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/maps/physmap.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 7c8cdf49deb..42d844f8f6b 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -201,8 +201,19 @@ static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		if (info->mtd[i]->suspend)
-			ret |= info->mtd[i]->suspend(info->mtd[i]);
+		if (info->mtd[i]->suspend) {
+			ret = info->mtd[i]->suspend(info->mtd[i]);
+			if (ret)
+				goto fail;
+		}
+
+	return 0;
+fail:
+	for (--i; i >= 0; --i)
+		if (info->mtd[i]->suspend) {
+			BUG_ON(!info->mtd[i]->resume);
+			info->mtd[i]->resume(info->mtd[i]);
+		}
 
 	return ret;
 }
-- 
cgit v1.2.3


From 7788ba71a6046de1b70e7dd45ed0bc5768a4bbd9 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 19 Jul 2008 01:00:18 +0900
Subject: [MTD][MTDPART] Seperate main loop from per-partition code in
 add_mtd_partition
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

add_mtd_partition was a 150+ line monster consisting mostly of a single
loop.  Seperate the loop from most of the body.  Now it should be
obvious which variables are carried around from iteration to iteration.

Signed-off-by: Jörn Engel <joern@logfs.org>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdpart.c | 324 ++++++++++++++++++++++++++------------------------
 1 file changed, 166 insertions(+), 158 deletions(-)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 56a760a736a..45c6f32b0bf 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -313,6 +313,170 @@ int del_mtd_partitions(struct mtd_info *master)
 	return 0;
 }
 
+static struct mtd_part *add_one_partition(struct mtd_info *master,
+		const struct mtd_partition *part, int partno,
+		u_int32_t cur_offset)
+{
+	struct mtd_part *slave;
+
+	/* allocate the partition structure */
+	slave = kzalloc (sizeof(*slave), GFP_KERNEL);
+	if (!slave) {
+		printk("memory allocation error while creating partitions for \"%s\"\n",
+			master->name);
+		del_mtd_partitions(master);
+		return NULL;
+	}
+	list_add(&slave->list, &mtd_partitions);
+
+	/* set up the MTD object for this partition */
+	slave->mtd.type = master->type;
+	slave->mtd.flags = master->flags & ~part->mask_flags;
+	slave->mtd.size = part->size;
+	slave->mtd.writesize = master->writesize;
+	slave->mtd.oobsize = master->oobsize;
+	slave->mtd.oobavail = master->oobavail;
+	slave->mtd.subpage_sft = master->subpage_sft;
+
+	slave->mtd.name = part->name;
+	slave->mtd.owner = master->owner;
+
+	slave->mtd.read = part_read;
+	slave->mtd.write = part_write;
+
+	if (master->panic_write)
+		slave->mtd.panic_write = part_panic_write;
+
+	if(master->point && master->unpoint){
+		slave->mtd.point = part_point;
+		slave->mtd.unpoint = part_unpoint;
+	}
+
+	if (master->read_oob)
+		slave->mtd.read_oob = part_read_oob;
+	if (master->write_oob)
+		slave->mtd.write_oob = part_write_oob;
+	if(master->read_user_prot_reg)
+		slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
+	if(master->read_fact_prot_reg)
+		slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
+	if(master->write_user_prot_reg)
+		slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
+	if(master->lock_user_prot_reg)
+		slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
+	if(master->get_user_prot_info)
+		slave->mtd.get_user_prot_info = part_get_user_prot_info;
+	if(master->get_fact_prot_info)
+		slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
+	if (master->sync)
+		slave->mtd.sync = part_sync;
+	if (!partno && master->suspend && master->resume) {
+			slave->mtd.suspend = part_suspend;
+			slave->mtd.resume = part_resume;
+	}
+	if (master->writev)
+		slave->mtd.writev = part_writev;
+	if (master->lock)
+		slave->mtd.lock = part_lock;
+	if (master->unlock)
+		slave->mtd.unlock = part_unlock;
+	if (master->block_isbad)
+		slave->mtd.block_isbad = part_block_isbad;
+	if (master->block_markbad)
+		slave->mtd.block_markbad = part_block_markbad;
+	slave->mtd.erase = part_erase;
+	slave->master = master;
+	slave->offset = part->offset;
+	slave->index = partno;
+
+	if (slave->offset == MTDPART_OFS_APPEND)
+		slave->offset = cur_offset;
+	if (slave->offset == MTDPART_OFS_NXTBLK) {
+		slave->offset = cur_offset;
+		if ((cur_offset % master->erasesize) != 0) {
+			/* Round up to next erasesize */
+			slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
+			printk(KERN_NOTICE "Moving partition %d: "
+			       "0x%08x -> 0x%08x\n", partno,
+			       cur_offset, slave->offset);
+		}
+	}
+	if (slave->mtd.size == MTDPART_SIZ_FULL)
+		slave->mtd.size = master->size - slave->offset;
+
+	printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
+		slave->offset + slave->mtd.size, slave->mtd.name);
+
+	/* let's do some sanity checks */
+	if (slave->offset >= master->size) {
+			/* let's register it anyway to preserve ordering */
+		slave->offset = 0;
+		slave->mtd.size = 0;
+		printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
+			part->name);
+	}
+	if (slave->offset + slave->mtd.size > master->size) {
+		slave->mtd.size = master->size - slave->offset;
+		printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+			part->name, master->name, slave->mtd.size);
+	}
+	if (master->numeraseregions>1) {
+		/* Deal with variable erase size stuff */
+		int i;
+		struct mtd_erase_region_info *regions = master->eraseregions;
+
+		/* Find the first erase regions which is part of this partition. */
+		for (i=0; i < master->numeraseregions && regions[i].offset <= slave->offset; i++)
+			;
+
+		for (i--; i < master->numeraseregions && regions[i].offset < slave->offset + slave->mtd.size; i++) {
+			if (slave->mtd.erasesize < regions[i].erasesize) {
+				slave->mtd.erasesize = regions[i].erasesize;
+			}
+		}
+	} else {
+		/* Single erase size */
+		slave->mtd.erasesize = master->erasesize;
+	}
+
+	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+	    (slave->offset % slave->mtd.erasesize)) {
+		/* Doesn't start on a boundary of major erase size */
+		/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
+		slave->mtd.flags &= ~MTD_WRITEABLE;
+		printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+			part->name);
+	}
+	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+	    (slave->mtd.size % slave->mtd.erasesize)) {
+		slave->mtd.flags &= ~MTD_WRITEABLE;
+		printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+			part->name);
+	}
+
+	slave->mtd.ecclayout = master->ecclayout;
+	if (master->block_isbad) {
+		uint32_t offs = 0;
+
+		while(offs < slave->mtd.size) {
+			if (master->block_isbad(master,
+						offs + slave->offset))
+				slave->mtd.ecc_stats.badblocks++;
+			offs += slave->mtd.erasesize;
+		}
+	}
+
+	if(part->mtdp) {	/* store the object pointer (caller may or may not register it */
+		*part->mtdp = &slave->mtd;
+		slave->registered = 0;
+	} else {
+		/* register our partition */
+		add_mtd_device(&slave->mtd);
+		slave->registered = 1;
+	}
+	return slave;
+}
+
 /*
  * This function, given a master MTD object and a partition table, creates
  * and registers slave MTD objects which are bound to the master according to
@@ -331,166 +495,10 @@ int add_mtd_partitions(struct mtd_info *master,
 	printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
 
 	for (i = 0; i < nbparts; i++) {
-
-		/* allocate the partition structure */
-		slave = kzalloc (sizeof(*slave), GFP_KERNEL);
-		if (!slave) {
-			printk ("memory allocation error while creating partitions for \"%s\"\n",
-				master->name);
-			del_mtd_partitions(master);
+		slave = add_one_partition(master, parts + i, i, cur_offset);
+		if (!slave)
 			return -ENOMEM;
-		}
-		list_add(&slave->list, &mtd_partitions);
-
-		/* set up the MTD object for this partition */
-		slave->mtd.type = master->type;
-		slave->mtd.flags = master->flags & ~parts[i].mask_flags;
-		slave->mtd.size = parts[i].size;
-		slave->mtd.writesize = master->writesize;
-		slave->mtd.oobsize = master->oobsize;
-		slave->mtd.oobavail = master->oobavail;
-		slave->mtd.subpage_sft = master->subpage_sft;
-
-		slave->mtd.name = parts[i].name;
-		slave->mtd.owner = master->owner;
-
-		slave->mtd.read = part_read;
-		slave->mtd.write = part_write;
-
-		if (master->panic_write)
-			slave->mtd.panic_write = part_panic_write;
-
-		if(master->point && master->unpoint){
-			slave->mtd.point = part_point;
-			slave->mtd.unpoint = part_unpoint;
-		}
-
-		if (master->read_oob)
-			slave->mtd.read_oob = part_read_oob;
-		if (master->write_oob)
-			slave->mtd.write_oob = part_write_oob;
-		if(master->read_user_prot_reg)
-			slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
-		if(master->read_fact_prot_reg)
-			slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
-		if(master->write_user_prot_reg)
-			slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
-		if(master->lock_user_prot_reg)
-			slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
-		if(master->get_user_prot_info)
-			slave->mtd.get_user_prot_info = part_get_user_prot_info;
-		if(master->get_fact_prot_info)
-			slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
-		if (master->sync)
-			slave->mtd.sync = part_sync;
-		if (!i && master->suspend && master->resume) {
-				slave->mtd.suspend = part_suspend;
-				slave->mtd.resume = part_resume;
-		}
-		if (master->writev)
-			slave->mtd.writev = part_writev;
-		if (master->lock)
-			slave->mtd.lock = part_lock;
-		if (master->unlock)
-			slave->mtd.unlock = part_unlock;
-		if (master->block_isbad)
-			slave->mtd.block_isbad = part_block_isbad;
-		if (master->block_markbad)
-			slave->mtd.block_markbad = part_block_markbad;
-		slave->mtd.erase = part_erase;
-		slave->master = master;
-		slave->offset = parts[i].offset;
-		slave->index = i;
-
-		if (slave->offset == MTDPART_OFS_APPEND)
-			slave->offset = cur_offset;
-		if (slave->offset == MTDPART_OFS_NXTBLK) {
-			slave->offset = cur_offset;
-			if ((cur_offset % master->erasesize) != 0) {
-				/* Round up to next erasesize */
-				slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
-				printk(KERN_NOTICE "Moving partition %d: "
-				       "0x%08x -> 0x%08x\n", i,
-				       cur_offset, slave->offset);
-			}
-		}
-		if (slave->mtd.size == MTDPART_SIZ_FULL)
-			slave->mtd.size = master->size - slave->offset;
 		cur_offset = slave->offset + slave->mtd.size;
-
-		printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
-			slave->offset + slave->mtd.size, slave->mtd.name);
-
-		/* let's do some sanity checks */
-		if (slave->offset >= master->size) {
-				/* let's register it anyway to preserve ordering */
-			slave->offset = 0;
-			slave->mtd.size = 0;
-			printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
-				parts[i].name);
-		}
-		if (slave->offset + slave->mtd.size > master->size) {
-			slave->mtd.size = master->size - slave->offset;
-			printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
-				parts[i].name, master->name, slave->mtd.size);
-		}
-		if (master->numeraseregions>1) {
-			/* Deal with variable erase size stuff */
-			int i;
-			struct mtd_erase_region_info *regions = master->eraseregions;
-
-			/* Find the first erase regions which is part of this partition. */
-			for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
-				;
-
-			for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
-				if (slave->mtd.erasesize < regions[i].erasesize) {
-					slave->mtd.erasesize = regions[i].erasesize;
-				}
-			}
-		} else {
-			/* Single erase size */
-			slave->mtd.erasesize = master->erasesize;
-		}
-
-		if ((slave->mtd.flags & MTD_WRITEABLE) &&
-		    (slave->offset % slave->mtd.erasesize)) {
-			/* Doesn't start on a boundary of major erase size */
-			/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
-			slave->mtd.flags &= ~MTD_WRITEABLE;
-			printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
-				parts[i].name);
-		}
-		if ((slave->mtd.flags & MTD_WRITEABLE) &&
-		    (slave->mtd.size % slave->mtd.erasesize)) {
-			slave->mtd.flags &= ~MTD_WRITEABLE;
-			printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
-				parts[i].name);
-		}
-
-		slave->mtd.ecclayout = master->ecclayout;
-		if (master->block_isbad) {
-			uint32_t offs = 0;
-
-			while(offs < slave->mtd.size) {
-				if (master->block_isbad(master,
-							offs + slave->offset))
-					slave->mtd.ecc_stats.badblocks++;
-				offs += slave->mtd.erasesize;
-			}
-		}
-
-		if(parts[i].mtdp)
-		{	/* store the object pointer (caller may or may not register it */
-			*parts[i].mtdp = &slave->mtd;
-			slave->registered = 0;
-		}
-		else
-		{
-			/* register our partition */
-			add_mtd_device(&slave->mtd);
-			slave->registered = 1;
-		}
 	}
 
 	return 0;
-- 
cgit v1.2.3


From b33a2887396a1a5207e56459f62c4b132294ca58 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 19 Jul 2008 01:00:33 +0900
Subject: [MTD][MTDPART] Handle most checkpatch findings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Remaining are 12 warnings about long lines and 1 about braces that
could be argued about.

Signed-off-by: Jörn Engel <joern@logfs.org>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdpart.c | 129 +++++++++++++++++++++++++-------------------------
 1 file changed, 65 insertions(+), 64 deletions(-)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 45c6f32b0bf..9cf73d360e7 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -44,8 +44,8 @@ struct mtd_part {
  * to the _real_ device.
  */
 
-static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
 	int res;
@@ -54,7 +54,7 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
 		len = 0;
 	else if (from + len > mtd->size)
 		len = mtd->size - from;
-	res = part->master->read (part->master, from + part->offset,
+	res = part->master->read(part->master, from + part->offset,
 				   len, retlen, buf);
 	if (unlikely(res)) {
 		if (res == -EUCLEAN)
@@ -65,8 +65,8 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
 	return res;
 }
 
-static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, void **virt, resource_size_t *phys)
+static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, void **virt, resource_size_t *phys)
 {
 	struct mtd_part *part = PART(mtd);
 	if (from >= mtd->size)
@@ -85,7 +85,7 @@ static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 }
 
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
-			 struct mtd_oob_ops *ops)
+		struct mtd_oob_ops *ops)
 {
 	struct mtd_part *part = PART(mtd);
 	int res;
@@ -105,38 +105,38 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
 	return res;
 }
 
-static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->read_user_prot_reg (part->master, from,
+	return part->master->read_user_prot_reg(part->master, from,
 					len, retlen, buf);
 }
 
-static int part_get_user_prot_info (struct mtd_info *mtd,
-				    struct otp_info *buf, size_t len)
+static int part_get_user_prot_info(struct mtd_info *mtd,
+		struct otp_info *buf, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->get_user_prot_info (part->master, buf, len);
+	return part->master->get_user_prot_info(part->master, buf, len);
 }
 
-static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->read_fact_prot_reg (part->master, from,
+	return part->master->read_fact_prot_reg(part->master, from,
 					len, retlen, buf);
 }
 
-static int part_get_fact_prot_info (struct mtd_info *mtd,
-				    struct otp_info *buf, size_t len)
+static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->get_fact_prot_info (part->master, buf, len);
+	return part->master->get_fact_prot_info(part->master, buf, len);
 }
 
-static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
-			size_t *retlen, const u_char *buf)
+static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
 	if (!(mtd->flags & MTD_WRITEABLE))
@@ -145,12 +145,12 @@ static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
 		len = 0;
 	else if (to + len > mtd->size)
 		len = mtd->size - to;
-	return part->master->write (part->master, to + part->offset,
+	return part->master->write(part->master, to + part->offset,
 				    len, retlen, buf);
 }
 
-static int part_panic_write (struct mtd_info *mtd, loff_t to, size_t len,
-			size_t *retlen, const u_char *buf)
+static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
 	if (!(mtd->flags & MTD_WRITEABLE))
@@ -159,12 +159,12 @@ static int part_panic_write (struct mtd_info *mtd, loff_t to, size_t len,
 		len = 0;
 	else if (to + len > mtd->size)
 		len = mtd->size - to;
-	return part->master->panic_write (part->master, to + part->offset,
+	return part->master->panic_write(part->master, to + part->offset,
 				    len, retlen, buf);
 }
 
 static int part_write_oob(struct mtd_info *mtd, loff_t to,
-			 struct mtd_oob_ops *ops)
+		struct mtd_oob_ops *ops)
 {
 	struct mtd_part *part = PART(mtd);
 
@@ -178,31 +178,32 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to,
 	return part->master->write_oob(part->master, to + part->offset, ops);
 }
 
-static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->write_user_prot_reg (part->master, from,
+	return part->master->write_user_prot_reg(part->master, from,
 					len, retlen, buf);
 }
 
-static int part_lock_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len)
+static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->lock_user_prot_reg (part->master, from, len);
+	return part->master->lock_user_prot_reg(part->master, from, len);
 }
 
-static int part_writev (struct mtd_info *mtd,  const struct kvec *vecs,
-			 unsigned long count, loff_t to, size_t *retlen)
+static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		unsigned long count, loff_t to, size_t *retlen)
 {
 	struct mtd_part *part = PART(mtd);
 	if (!(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
-	return part->master->writev (part->master, vecs, count,
+	return part->master->writev(part->master, vecs, count,
 					to + part->offset, retlen);
 }
 
-static int part_erase (struct mtd_info *mtd, struct erase_info *instr)
+static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct mtd_part *part = PART(mtd);
 	int ret;
@@ -234,7 +235,7 @@ void mtd_erase_callback(struct erase_info *instr)
 }
 EXPORT_SYMBOL_GPL(mtd_erase_callback);
 
-static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
+static int part_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
 	if ((len + ofs) > mtd->size)
@@ -242,7 +243,7 @@ static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
 	return part->master->lock(part->master, ofs + part->offset, len);
 }
 
-static int part_unlock (struct mtd_info *mtd, loff_t ofs, size_t len)
+static int part_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
 	if ((len + ofs) > mtd->size)
@@ -268,7 +269,7 @@ static void part_resume(struct mtd_info *mtd)
 	part->master->resume(part->master);
 }
 
-static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
+static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
 	if (ofs >= mtd->size)
@@ -277,7 +278,7 @@ static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
 	return part->master->block_isbad(part->master, ofs);
 }
 
-static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
+static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
 	int res;
@@ -305,13 +306,14 @@ int del_mtd_partitions(struct mtd_info *master)
 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
 		if (slave->master == master) {
 			list_del(&slave->list);
-			if(slave->registered)
+			if (slave->registered)
 				del_mtd_device(&slave->mtd);
 			kfree(slave);
 		}
 
 	return 0;
 }
+EXPORT_SYMBOL(del_mtd_partitions);
 
 static struct mtd_part *add_one_partition(struct mtd_info *master,
 		const struct mtd_partition *part, int partno,
@@ -320,9 +322,9 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	struct mtd_part *slave;
 
 	/* allocate the partition structure */
-	slave = kzalloc (sizeof(*slave), GFP_KERNEL);
+	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
 	if (!slave) {
-		printk("memory allocation error while creating partitions for \"%s\"\n",
+		printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
 			master->name);
 		del_mtd_partitions(master);
 		return NULL;
@@ -347,7 +349,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	if (master->panic_write)
 		slave->mtd.panic_write = part_panic_write;
 
-	if(master->point && master->unpoint){
+	if (master->point && master->unpoint) {
 		slave->mtd.point = part_point;
 		slave->mtd.unpoint = part_unpoint;
 	}
@@ -356,17 +358,17 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		slave->mtd.read_oob = part_read_oob;
 	if (master->write_oob)
 		slave->mtd.write_oob = part_write_oob;
-	if(master->read_user_prot_reg)
+	if (master->read_user_prot_reg)
 		slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
-	if(master->read_fact_prot_reg)
+	if (master->read_fact_prot_reg)
 		slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
-	if(master->write_user_prot_reg)
+	if (master->write_user_prot_reg)
 		slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
-	if(master->lock_user_prot_reg)
+	if (master->lock_user_prot_reg)
 		slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
-	if(master->get_user_prot_info)
+	if (master->get_user_prot_info)
 		slave->mtd.get_user_prot_info = part_get_user_prot_info;
-	if(master->get_fact_prot_info)
+	if (master->get_fact_prot_info)
 		slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
 	if (master->sync)
 		slave->mtd.sync = part_sync;
@@ -404,7 +406,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	if (slave->mtd.size == MTDPART_SIZ_FULL)
 		slave->mtd.size = master->size - slave->offset;
 
-	printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
+	printk(KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
 		slave->offset + slave->mtd.size, slave->mtd.name);
 
 	/* let's do some sanity checks */
@@ -412,21 +414,21 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 			/* let's register it anyway to preserve ordering */
 		slave->offset = 0;
 		slave->mtd.size = 0;
-		printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
+		printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
 			part->name);
 	}
 	if (slave->offset + slave->mtd.size > master->size) {
 		slave->mtd.size = master->size - slave->offset;
-		printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+		printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
 			part->name, master->name, slave->mtd.size);
 	}
-	if (master->numeraseregions>1) {
+	if (master->numeraseregions > 1) {
 		/* Deal with variable erase size stuff */
 		int i;
 		struct mtd_erase_region_info *regions = master->eraseregions;
 
 		/* Find the first erase regions which is part of this partition. */
-		for (i=0; i < master->numeraseregions && regions[i].offset <= slave->offset; i++)
+		for (i = 0; i < master->numeraseregions && regions[i].offset <= slave->offset; i++)
 			;
 
 		for (i--; i < master->numeraseregions && regions[i].offset < slave->offset + slave->mtd.size; i++) {
@@ -442,15 +444,16 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
 	    (slave->offset % slave->mtd.erasesize)) {
 		/* Doesn't start on a boundary of major erase size */
-		/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
+		/* FIXME: Let it be writable if it is on a boundary of
+		 * _minor_ erase size though */
 		slave->mtd.flags &= ~MTD_WRITEABLE;
-		printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
 			part->name);
 	}
 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
 	    (slave->mtd.size % slave->mtd.erasesize)) {
 		slave->mtd.flags &= ~MTD_WRITEABLE;
-		printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
 			part->name);
 	}
 
@@ -458,7 +461,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	if (master->block_isbad) {
 		uint32_t offs = 0;
 
-		while(offs < slave->mtd.size) {
+		while (offs < slave->mtd.size) {
 			if (master->block_isbad(master,
 						offs + slave->offset))
 				slave->mtd.ecc_stats.badblocks++;
@@ -466,7 +469,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		}
 	}
 
-	if(part->mtdp) {	/* store the object pointer (caller may or may not register it */
+	if (part->mtdp) {
+		/* store the object pointer (caller may or may not register it*/
 		*part->mtdp = &slave->mtd;
 		slave->registered = 0;
 	} else {
@@ -492,7 +496,7 @@ int add_mtd_partitions(struct mtd_info *master,
 	u_int32_t cur_offset = 0;
 	int i;
 
-	printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
 
 	for (i = 0; i < nbparts; i++) {
 		slave = add_one_partition(master, parts + i, i, cur_offset);
@@ -503,9 +507,7 @@ int add_mtd_partitions(struct mtd_info *master,
 
 	return 0;
 }
-
 EXPORT_SYMBOL(add_mtd_partitions);
-EXPORT_SYMBOL(del_mtd_partitions);
 
 static DEFINE_SPINLOCK(part_parser_lock);
 static LIST_HEAD(part_parsers);
@@ -535,6 +537,7 @@ int register_mtd_parser(struct mtd_part_parser *p)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(register_mtd_parser);
 
 int deregister_mtd_parser(struct mtd_part_parser *p)
 {
@@ -543,6 +546,7 @@ int deregister_mtd_parser(struct mtd_part_parser *p)
 	spin_unlock(&part_parser_lock);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(deregister_mtd_parser);
 
 int parse_mtd_partitions(struct mtd_info *master, const char **types,
 			 struct mtd_partition **pparts, unsigned long origin)
@@ -570,7 +574,4 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types,
 	}
 	return ret;
 }
-
 EXPORT_SYMBOL_GPL(parse_mtd_partitions);
-EXPORT_SYMBOL_GPL(register_mtd_parser);
-EXPORT_SYMBOL_GPL(deregister_mtd_parser);
-- 
cgit v1.2.3


From 6910c1368104d50e6b6afc6c8b7e9d1670a374e7 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 19 Jul 2008 01:00:57 +0900
Subject: [MTD][MTDPART] Cleanup and document the erase region handling
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Mostly simplifying the loops.  Now everything fits into 80 columns,
is easier to read and the finer details have extra comments.

Signed-off-by: Jörn Engel <joern@logfs.org>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdpart.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 9cf73d360e7..5aac59c21ea 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -424,18 +424,24 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	}
 	if (master->numeraseregions > 1) {
 		/* Deal with variable erase size stuff */
-		int i;
+		int i, max = master->numeraseregions;
+		u32 end = slave->offset + slave->mtd.size;
 		struct mtd_erase_region_info *regions = master->eraseregions;
 
-		/* Find the first erase regions which is part of this partition. */
-		for (i = 0; i < master->numeraseregions && regions[i].offset <= slave->offset; i++)
+		/* Find the first erase regions which is part of this
+		 * partition. */
+		for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
 			;
+		/* The loop searched for the region _behind_ the first one */
+		i--;
 
-		for (i--; i < master->numeraseregions && regions[i].offset < slave->offset + slave->mtd.size; i++) {
+		/* Pick biggest erasesize */
+		for (; i < max && regions[i].offset < end; i++) {
 			if (slave->mtd.erasesize < regions[i].erasesize) {
 				slave->mtd.erasesize = regions[i].erasesize;
 			}
 		}
+		BUG_ON(slave->mtd.erasesize == 0);
 	} else {
 		/* Single erase size */
 		slave->mtd.erasesize = master->erasesize;
-- 
cgit v1.2.3


From f636ffb420f0f9059c1d0b841afd691657246ad6 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 19 Jul 2008 01:01:22 +0900
Subject: [MTD][MTDPART] Fix a division by zero bug
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When detecting a partition beyond the end of the device, skip most of
the initialisation, in particular those bits causing a division by zero.

Signed-off-by: Jörn Engel <joern@logfs.org>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdpart.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 5aac59c21ea..edb90b58a9b 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -411,11 +411,12 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 
 	/* let's do some sanity checks */
 	if (slave->offset >= master->size) {
-			/* let's register it anyway to preserve ordering */
+		/* let's register it anyway to preserve ordering */
 		slave->offset = 0;
 		slave->mtd.size = 0;
 		printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
 			part->name);
+		goto out_register;
 	}
 	if (slave->offset + slave->mtd.size > master->size) {
 		slave->mtd.size = master->size - slave->offset;
@@ -475,6 +476,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		}
 	}
 
+out_register:
 	if (part->mtdp) {
 		/* store the object pointer (caller may or may not register it*/
 		*part->mtdp = &slave->mtd;
-- 
cgit v1.2.3


From ca6f12c67ed19718cf37d0f531af9438de85b70c Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Wed, 16 Jul 2008 00:09:15 +0900
Subject: [MTD] jedec_probe: Fix SST 16-bit chip detection

The unlock_addr rework in kernel 2.6.25 breaks 16-bit SST chips.  SST
39LF160 and SST 39VF1601 are both 16-bit only chip (do not have BYTE#
pin) and new uaddr value is not correct for them.  Add
MTD_UADDR_0xAAAA_0x5555 for those chips.  Tested with SST 39VF1601
chip.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/chips/jedec_probe.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index afb35e3a3ce..dbba5abf0db 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -200,6 +200,7 @@ enum uaddr {
 	MTD_UADDR_0x0555_0x0AAA,
 	MTD_UADDR_0x5555_0x2AAA,
 	MTD_UADDR_0x0AAA_0x0555,
+	MTD_UADDR_0xAAAA_0x5555,
 	MTD_UADDR_DONT_CARE,		/* Requires an arbitrary address */
 	MTD_UADDR_UNNECESSARY,		/* Does not require any address */
 };
@@ -247,6 +248,11 @@ static const struct unlock_addr  unlock_addrs[] = {
 		.addr2 = 0x0555
 	},
 
+	[MTD_UADDR_0xAAAA_0x5555] = {
+		.addr1 = 0xaaaa,
+		.addr2 = 0x5555
+	},
+
 	[MTD_UADDR_DONT_CARE] = {
 		.addr1 = 0x0000,      /* Doesn't matter which address */
 		.addr2 = 0x0000       /* is used - must be last entry */
@@ -1461,8 +1467,8 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= MANUFACTURER_SST,     /* should be CFI */
 		.dev_id		= SST39LF160,
 		.name		= "SST 39LF160",
-		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0xAAAA_0x5555,
 		.dev_size	= SIZE_2MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 2,
@@ -1474,8 +1480,8 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= MANUFACTURER_SST,     /* should be CFI */
 		.dev_id		= SST39VF1601,
 		.name		= "SST 39VF1601",
-		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0xAAAA_0x5555,
 		.dev_size	= SIZE_2MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 2,
-- 
cgit v1.2.3


From ee39a0e61b8a307576b5e26057f8257444b5c9c1 Mon Sep 17 00:00:00 2001
From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Tue, 15 Jul 2008 23:04:35 +0900
Subject: [MTD][NAND] au1550nd: remove unused variable

Remove unused variable from au1550 NAND driver.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/au1550nd.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 22ad9f36776..761946ea45b 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -602,8 +602,6 @@ module_init(au1xxx_nand_init);
  */
 static void __exit au1550_cleanup(void)
 {
-	struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1];
-
 	/* Release resources, unregister device */
 	nand_release(au1550_mtd);
 
-- 
cgit v1.2.3


From 30821fee4f0cb3e6d241d9f7ddc37742212e3eb7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-mtd@fluff.org>
Date: Tue, 15 Jul 2008 11:58:31 +0100
Subject: CPUFREQ: S3C24XX NAND driver frequency scaling support.

Add support for CPU frequency scalling to the S3C24XX NAND driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/s3c2410.c | 143 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 122 insertions(+), 21 deletions(-)

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 35c6db54c98..556139ed1fd 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -36,6 +36,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -104,8 +105,13 @@ struct s3c2410_nand_info {
 	int				sel_bit;
 	int				mtd_count;
 	unsigned long			save_sel;
+	unsigned long			clk_rate;
 
 	enum s3c_cpu_type		cpu_type;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
 };
 
 /* conversion functions */
@@ -163,17 +169,18 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 
 /* controller setup */
 
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
-			       struct platform_device *pdev)
+static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 {
-	struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
-	unsigned long clkrate = clk_get_rate(info->clk);
+	struct s3c2410_platform_nand *plat = info->platform;
 	int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
 	int tacls, twrph0, twrph1;
-	unsigned long cfg = 0;
+	unsigned long clkrate = clk_get_rate(info->clk);
+	unsigned long set, cfg, mask;
+	unsigned long flags;
 
 	/* calculate the timing information for the controller */
 
+	info->clk_rate = clkrate;
 	clkrate /= 1000;	/* turn clock into kHz for ease of use */
 
 	if (plat != NULL) {
@@ -195,28 +202,69 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
 	dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
 	       tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
 
+	switch (info->cpu_type) {
+	case TYPE_S3C2410:
+		mask = (S3C2410_NFCONF_TACLS(3) |
+			S3C2410_NFCONF_TWRPH0(7) |
+			S3C2410_NFCONF_TWRPH1(7));
+		set = S3C2410_NFCONF_EN;
+		set |= S3C2410_NFCONF_TACLS(tacls - 1);
+		set |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+		set |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+		break;
+
+	case TYPE_S3C2440:
+	case TYPE_S3C2412:
+		mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) |
+			S3C2410_NFCONF_TWRPH0(7) |
+			S3C2410_NFCONF_TWRPH1(7));
+
+		set = S3C2440_NFCONF_TACLS(tacls - 1);
+		set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+		set |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+		break;
+
+	default:
+		/* keep compiler happy */
+		mask = 0;
+		set = 0;
+		BUG();
+	}
+
+	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
+	local_irq_save(flags);
+
+	cfg = readl(info->regs + S3C2410_NFCONF);
+	cfg &= ~mask;
+	cfg |= set;
+	writel(cfg, info->regs + S3C2410_NFCONF);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
+{
+	int ret;
+
+	ret = s3c2410_nand_setrate(info);
+	if (ret < 0)
+		return ret;
+
  	switch (info->cpu_type) {
  	case TYPE_S3C2410:
-		cfg = S3C2410_NFCONF_EN;
-		cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
-		cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
-		cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+	default:
 		break;
 
  	case TYPE_S3C2440:
  	case TYPE_S3C2412:
-		cfg = S3C2440_NFCONF_TACLS(tacls - 1);
-		cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
-		cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
-
 		/* enable the controller and de-assert nFCE */
 
 		writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
 	}
 
-	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
-
-	writel(cfg, info->regs + S3C2410_NFCONF);
 	return 0;
 }
 
@@ -497,6 +545,52 @@ static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int
 	writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
 }
 
+/* cpufreq driver support */
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
+					  unsigned long val, void *data)
+{
+	struct s3c2410_nand_info *info;
+	unsigned long newclk;
+
+	info = container_of(nb, struct s3c2410_nand_info, freq_transition);
+	newclk = clk_get_rate(info->clk);
+
+	if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
+	    (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
+		s3c2410_nand_setrate(info);
+	}
+
+	return 0;
+}
+
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+	info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
+
+	return cpufreq_register_notifier(&info->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+	cpufreq_unregister_notifier(&info->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+	return 0;
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+}
+#endif
+
 /* device management functions */
 
 static int s3c2410_nand_remove(struct platform_device *pdev)
@@ -508,9 +602,10 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
 	if (info == NULL)
 		return 0;
 
-	/* first thing we need to do is release all our mtds
-	 * and their partitions, then go through freeing the
-	 * resources used
+	s3c2410_nand_cpufreq_deregister(info);
+
+	/* Release all our mtds  and their partitions, then go through
+	 * freeing the resources used
 	 */
 
 	if (info->mtds != NULL) {
@@ -769,7 +864,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 
 	/* initialise the hardware */
 
-	err = s3c2410_nand_inithw(info, pdev);
+	err = s3c2410_nand_inithw(info);
 	if (err != 0)
 		goto exit_error;
 
@@ -812,6 +907,12 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 			sets++;
 	}
 
+	err = s3c2410_nand_cpufreq_register(info);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to init cpufreq support\n");
+		goto exit_error;
+	}
+
 	if (allow_clk_stop(info)) {
 		dev_info(&pdev->dev, "clock idle support enabled\n");
 		clk_disable(info->clk);
@@ -859,7 +960,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 
 	if (info) {
 		clk_enable(info->clk);
-		s3c2410_nand_inithw(info, dev);
+		s3c2410_nand_inithw(info);
 
 		/* Restore the state of the nFCE line. */
 
-- 
cgit v1.2.3


From 3d45955962496879dead8d4dd70bb9a23b07154b Mon Sep 17 00:00:00 2001
From: Alexey Korolev <akorolev@infradead.org>
Date: Thu, 15 May 2008 17:23:18 +0100
Subject: [MTD] [NAND] subpage read feature as a way to increase performance.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch enables NAND subpage read functionality.
If upper layer drivers are requesting to read non page aligned data NAND
subpage-read functionality reads the only whose ECC regions which include
requested data when original code reads whole page.
This significantly improves performance in many cases.

Here are some digits :

UBI volume mount time
No subpage reads: 5.75 seconds
Subpage read patch: 2.42 seconds

Open/stat time for files on JFFS2 volume:
No subpage read  0m 5.36s
Subpage read     0m 2.88s

Signed-off-by Alexey Korolev <akorolev@infradead.org>
Acked-by: Artem Bityutskiy <dedekind@infradead.org>
Acked-by: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/nand_base.c | 87 +++++++++++++++++++++++++++++++++++++++++++-
 include/linux/mtd/nand.h     |  5 +++
 2 files changed, 91 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ba1bdf78732..d1129bae6c2 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -797,6 +797,87 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 	return 0;
 }
 
+/**
+ * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @dataofs	offset of requested data within the page
+ * @readlen	data length
+ * @buf:	buffer to store read data
+ */
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+{
+	int start_step, end_step, num_steps;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *p;
+	int data_col_addr, i, gaps = 0;
+	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+
+	/* Column address wihin the page aligned to ECC size (256bytes). */
+	start_step = data_offs / chip->ecc.size;
+	end_step = (data_offs + readlen - 1) / chip->ecc.size;
+	num_steps = end_step - start_step + 1;
+
+	/* Data size aligned to ECC ecc.size*/
+	datafrag_len = num_steps * chip->ecc.size;
+	eccfrag_len = num_steps * chip->ecc.bytes;
+
+	data_col_addr = start_step * chip->ecc.size;
+	/* If we read not a page aligned data */
+	if (data_col_addr != 0)
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+
+	p = bufpoi + data_col_addr;
+	chip->read_buf(mtd, p, datafrag_len);
+
+	/* Calculate  ECC */
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
+		chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
+
+	/* The performance is faster if to position offsets
+	   according to ecc.pos. Let make sure here that
+	   there are no gaps in ecc positions */
+	for (i = 0; i < eccfrag_len - 1; i++) {
+		if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
+			eccpos[i + start_step * chip->ecc.bytes + 1]) {
+			gaps = 1;
+			break;
+		}
+	}
+	if (gaps) {
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	} else {
+		/* send the command to read the particular ecc bytes */
+		/* take care about buswidth alignment in read_buf */
+		aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+		aligned_len = eccfrag_len;
+		if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+			aligned_len++;
+		if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+			aligned_len++;
+
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+		chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+	}
+
+	for (i = 0; i < eccfrag_len; i++)
+		chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+
+	p = bufpoi + data_col_addr;
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+		int stat;
+
+		stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+		if (stat == -1)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
 /**
  * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
  * @mtd:	mtd info structure
@@ -994,6 +1075,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			/* Now read the page into the buffer */
 			if (unlikely(ops->mode == MTD_OOB_RAW))
 				ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+				ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi);
 			if (ret < 0)
@@ -1001,7 +1084,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 			/* Transfer not aligned data */
 			if (!aligned) {
-				chip->pagebuf = realpage;
+				if (!NAND_SUBPAGE_READ(chip) && !oob)
+					chip->pagebuf = realpage;
 				memcpy(buf, chip->buffers->databuf + col, bytes);
 			}
 
@@ -2521,6 +2605,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		chip->ecc.calculate = nand_calculate_ecc;
 		chip->ecc.correct = nand_correct_data;
 		chip->ecc.read_page = nand_read_page_swecc;
+		chip->ecc.read_subpage = nand_read_subpage;
 		chip->ecc.write_page = nand_write_page_swecc;
 		chip->ecc.read_oob = nand_read_oob_std;
 		chip->ecc.write_oob = nand_write_oob_std;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 863e22a0ddb..83f678702df 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -177,6 +177,7 @@ typedef enum {
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
+#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT))
 
 /* Mask to zero out the chip options, which come from the id table */
 #define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
@@ -274,6 +275,10 @@ struct nand_ecc_ctrl {
 	int			(*read_page)(struct mtd_info *mtd,
 					     struct nand_chip *chip,
 					     uint8_t *buf);
+	int			(*read_subpage)(struct mtd_info *mtd,
+					     struct nand_chip *chip,
+					     uint32_t offs, uint32_t len,
+					     uint8_t *buf);
 	void			(*write_page)(struct mtd_info *mtd,
 					      struct nand_chip *chip,
 					      const uint8_t *buf);
-- 
cgit v1.2.3


From 29b309e52d3d51ef8a15bd15590903cf272beb93 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 25 Jul 2008 09:19:36 -0700
Subject: Undo duplicate "m68k: drivers/input/serio/hp_sdc.c needs
 <linux/semaphore.h>"

Both commits 0f17e4c796e89d1f69f13b653aba60e6ccfb8ae0 ("Add missing
semaphore.h includes") and 4933d07531711e399d8d578036aa9fc1be2f9b20
("m68k: drivers/input/serio/hp_sdc.c needs <linux/semaphore.h>") added a

We only really need one ;)

Reported-by: Huang Weiyi <weiyi.huang@gmail.com>
Requested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/input/serio/hp_sdc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index aad664d5259..0d395979b2d 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -70,7 +70,6 @@
 #include <linux/semaphore.h>
 #include <linux/slab.h>
 #include <linux/hil.h>
-#include <linux/semaphore.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
-- 
cgit v1.2.3


From 43de804df8d6002059bf4af4522fa9273a19b8aa Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Fri, 25 Jul 2008 23:30:15 +0800
Subject: char/xilinx_hwicap/xilinx_hwicap.c: Removed duplicated include

Removed duplicated include file <linux/version.h> in
char/xilinx_hwicap/xilinx_hwicap.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/xilinx_hwicap/xilinx_hwicap.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 51966ccf4ea..8bfee5fb722 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -87,7 +87,6 @@
 #include <linux/mutex.h>
 #include <linux/smp_lock.h>
 #include <linux/sysctl.h>
-#include <linux/version.h>
 #include <linux/fs.h>
 #include <linux/cdev.h>
 #include <linux/platform_device.h>
-- 
cgit v1.2.3


From 3d6f4a20cc287a8980c6186624834cf10a70752b Mon Sep 17 00:00:00 2001
From: David Miller <davem@davemloft.net>
Date: Thu, 24 Jul 2008 23:38:31 -0700
Subject: endian: Always evaluate arguments.

Changeset 7fa897b91a3ea0f16c2873b869d7a0eef05acff4 ("ide: trivial sparse
annotations") created an IDE bootup regression on big-endian systems.

In drivers/ide/ide-iops.c, function ide_fixstring() we now have the
loop:

		for (p = end ; p != s;)
			be16_to_cpus((u16 *)(p -= 2));

which will never terminate on big-endian because in such
a configuration be16_to_cpus() evaluates to "do { } while (0)"

Therefore, always evaluate the arguments to nop endian transformation
operations.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/byteorder/big_endian.h    | 12 ++++++------
 include/linux/byteorder/little_endian.h | 12 ++++++------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
index 961ed4b48d8..44f95b92393 100644
--- a/include/linux/byteorder/big_endian.h
+++ b/include/linux/byteorder/big_endian.h
@@ -94,12 +94,12 @@ static inline __u16 __be16_to_cpup(const __be16 *p)
 #define __le32_to_cpus(x) __swab32s((x))
 #define __cpu_to_le16s(x) __swab16s((x))
 #define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do {} while (0)
-#define __be64_to_cpus(x) do {} while (0)
-#define __cpu_to_be32s(x) do {} while (0)
-#define __be32_to_cpus(x) do {} while (0)
-#define __cpu_to_be16s(x) do {} while (0)
-#define __be16_to_cpus(x) do {} while (0)
+#define __cpu_to_be64s(x) do { (void)(x); } while (0)
+#define __be64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be32s(x) do { (void)(x); } while (0)
+#define __be32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be16s(x) do { (void)(x); } while (0)
+#define __be16_to_cpus(x) do { (void)(x); } while (0)
 
 #ifdef __KERNEL__
 #include <linux/byteorder/generic.h>
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
index 05dc7c35b3b..4cc170a3176 100644
--- a/include/linux/byteorder/little_endian.h
+++ b/include/linux/byteorder/little_endian.h
@@ -88,12 +88,12 @@ static inline __u16 __be16_to_cpup(const __be16 *p)
 {
 	return __swab16p((__u16 *)p);
 }
-#define __cpu_to_le64s(x) do {} while (0)
-#define __le64_to_cpus(x) do {} while (0)
-#define __cpu_to_le32s(x) do {} while (0)
-#define __le32_to_cpus(x) do {} while (0)
-#define __cpu_to_le16s(x) do {} while (0)
-#define __le16_to_cpus(x) do {} while (0)
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
 #define __cpu_to_be64s(x) __swab64s((x))
 #define __be64_to_cpus(x) __swab64s((x))
 #define __cpu_to_be32s(x) __swab32s((x))
-- 
cgit v1.2.3


From 3e4d0cab61c88a9ae3e61151a857960397e26403 Mon Sep 17 00:00:00 2001
From: Tony Luck <tony.luck@intel.com>
Date: Fri, 25 Jul 2008 10:10:28 -0700
Subject: [IA64] Wire up new system calls

Six new system calls: signalfd4, eventfd2, epoll_create1,
dup3, pipe2 and inotify_init1.

Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/entry.S  | 6 ++++++
 include/asm-ia64/unistd.h | 8 +++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 56ab156c48a..0dd6c1419d8 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1691,6 +1691,12 @@ sys_call_table:
 	data8 sys_timerfd_create		// 1310
 	data8 sys_timerfd_settime
 	data8 sys_timerfd_gettime
+	data8 sys_signalfd4
+	data8 sys_eventfd2
+	data8 sys_epoll_create1			// 1315
+	data8 sys_dup3
+	data8 sys_pipe2
+	data8 sys_inotify_init1
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
index e6031471612..d535833aab5 100644
--- a/include/asm-ia64/unistd.h
+++ b/include/asm-ia64/unistd.h
@@ -302,11 +302,17 @@
 #define __NR_timerfd_create		1310
 #define __NR_timerfd_settime		1311
 #define __NR_timerfd_gettime		1312
+#define __NR_signalfd4			1313
+#define __NR_eventfd2			1314
+#define __NR_epoll_create1		1315
+#define __NR_dup3			1316
+#define __NR_pipe2			1317
+#define __NR_inotify_init1		1318
 
 #ifdef __KERNEL__
 
 
-#define NR_syscalls			289 /* length of syscall table */
+#define NR_syscalls			295 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about
-- 
cgit v1.2.3


From 25c94d010a8ae8605dc4d5453e0c82fa97da5d12 Mon Sep 17 00:00:00 2001
From: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Date: Fri, 25 Jul 2008 10:30:06 -0700
Subject: mlx4_core: Add VLAN tag field to WQE control segment struct

Add fields for VLAN tag and insert VLAN tag flag to the control
section struct.  These fields will be used for sending ethernet
packets.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 include/linux/mlx4/qp.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index e27082cd650..bf8f11982da 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -164,11 +164,13 @@ enum {
 	MLX4_WQE_CTRL_SOLICITED		= 1 << 1,
 	MLX4_WQE_CTRL_IP_CSUM		= 1 << 4,
 	MLX4_WQE_CTRL_TCP_UDP_CSUM	= 1 << 5,
+	MLX4_WQE_CTRL_INS_VLAN		= 1 << 6,
 };
 
 struct mlx4_wqe_ctrl_seg {
 	__be32			owner_opcode;
-	u8			reserved2[3];
+	__be16			vlan_tag;
+	u8			ins_vlan;
 	u8			fence_size;
 	/*
 	 * High 24 bits are SRC remote buffer; low 8 bits are flags:
-- 
cgit v1.2.3


From 51a379d0c8f7a6db7c9e3c9c770d90a6d2d1ef9b Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Fri, 25 Jul 2008 10:32:52 -0700
Subject: mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver
 files

Update existing Mellanox copyright lines to 2008, and add such lines
to files where they are missing.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/mlx4/cq.c      | 1 +
 drivers/infiniband/hw/mlx4/main.c    | 1 +
 drivers/infiniband/hw/mlx4/mlx4_ib.h | 1 +
 drivers/infiniband/hw/mlx4/mr.c      | 1 +
 drivers/infiniband/hw/mlx4/qp.c      | 1 +
 drivers/infiniband/hw/mlx4/srq.c     | 1 +
 drivers/infiniband/hw/mlx4/user.h    | 1 +
 drivers/net/mlx4/alloc.c             | 1 +
 drivers/net/mlx4/catas.c             | 1 +
 drivers/net/mlx4/cmd.c               | 2 +-
 drivers/net/mlx4/cq.c                | 2 +-
 drivers/net/mlx4/eq.c                | 2 +-
 drivers/net/mlx4/fw.c                | 2 +-
 drivers/net/mlx4/fw.h                | 2 +-
 drivers/net/mlx4/icm.c               | 2 +-
 drivers/net/mlx4/icm.h               | 2 +-
 drivers/net/mlx4/intf.c              | 1 +
 drivers/net/mlx4/main.c              | 2 +-
 drivers/net/mlx4/mcg.c               | 1 +
 drivers/net/mlx4/mlx4.h              | 2 +-
 drivers/net/mlx4/mr.c                | 2 +-
 drivers/net/mlx4/qp.c                | 2 +-
 drivers/net/mlx4/reset.c             | 1 +
 drivers/net/mlx4/srq.c               | 1 +
 24 files changed, 24 insertions(+), 11 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index 0b191a4842c..a1464574bfd 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 38d6907ab52..a3c2851c054 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index d26a91317d4..6e2b0dc21b6 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index db2086faa4e..a4cdb465cd1 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 02a99bc4442..f7bc7dd8578 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mlx4/srq.c b/drivers/infiniband/hw/mlx4/srq.c
index 12d6bc6f800..d42565258fb 100644
--- a/drivers/infiniband/hw/mlx4/srq.c
+++ b/drivers/infiniband/hw/mlx4/srq.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/mlx4/user.h b/drivers/infiniband/hw/mlx4/user.h
index e2d11be4525..13beedeeef9 100644
--- a/drivers/infiniband/hw/mlx4/user.h
+++ b/drivers/infiniband/hw/mlx4/user.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/mlx4/alloc.c
index f9d6b4dca18..096bca54bcf 100644
--- a/drivers/net/mlx4/alloc.c
+++ b/drivers/net/mlx4/alloc.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/catas.c b/drivers/net/mlx4/catas.c
index aa952877904..f094ee00c41 100644
--- a/drivers/net/mlx4/catas.c
+++ b/drivers/net/mlx4/catas.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/cmd.c b/drivers/net/mlx4/cmd.c
index 04d5bc69a6f..2845a0560b8 100644
--- a/drivers/net/mlx4/cmd.c
+++ b/drivers/net/mlx4/cmd.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/cq.c b/drivers/net/mlx4/cq.c
index 95e87a2f889..9bb50e3f897 100644
--- a/drivers/net/mlx4/cq.c
+++ b/drivers/net/mlx4/cq.c
@@ -2,7 +2,7 @@
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
  * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc. All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2004 Voltaire, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index ea3a09aaa84..bd34bf08830 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index 57278224ba1..7e32955da98 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/fw.h b/drivers/net/mlx4/fw.h
index fbf0e22be12..decbb5c2ad4 100644
--- a/drivers/net/mlx4/fw.h
+++ b/drivers/net/mlx4/fw.h
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/icm.c b/drivers/net/mlx4/icm.c
index 2a5bef6388f..baf4bf66062 100644
--- a/drivers/net/mlx4/icm.c
+++ b/drivers/net/mlx4/icm.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/icm.h b/drivers/net/mlx4/icm.h
index 6c44edf3584..ab56a2f89b6 100644
--- a/drivers/net/mlx4/icm.h
+++ b/drivers/net/mlx4/icm.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/intf.c b/drivers/net/mlx4/intf.c
index 4a6c4d526f1..0e7eb1038f9 100644
--- a/drivers/net/mlx4/intf.c
+++ b/drivers/net/mlx4/intf.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 8e1d24cda1b..1252a919de2 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
  * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c
index b4b57870ddf..c83f88ce073 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/mlx4/mcg.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 78038499cff..5337e3ac3e7 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -2,7 +2,7 @@
  * Copyright (c) 2004, 2005 Topspin Communications.  All rights reserved.
  * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2004 Voltaire, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index a3c04c5f12c..62071d9c4a5 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2004 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/qp.c b/drivers/net/mlx4/qp.c
index ee5484c44a1..c49a86044bf 100644
--- a/drivers/net/mlx4/qp.c
+++ b/drivers/net/mlx4/qp.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2004 Topspin Communications.  All rights reserved.
  * Copyright (c) 2005, 2006, 2007 Cisco Systems, Inc. All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved.
  * Copyright (c) 2004 Voltaire, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
diff --git a/drivers/net/mlx4/reset.c b/drivers/net/mlx4/reset.c
index e199715fabd..3951b884c0f 100644
--- a/drivers/net/mlx4/reset.c
+++ b/drivers/net/mlx4/reset.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
diff --git a/drivers/net/mlx4/srq.c b/drivers/net/mlx4/srq.c
index d23f46d692e..533eb6db24b 100644
--- a/drivers/net/mlx4/srq.c
+++ b/drivers/net/mlx4/srq.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
-- 
cgit v1.2.3


From c82dd5321cf779f1f536ef26b383cbe8c9de7f10 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Fri, 25 Jul 2008 01:45:22 -0700
Subject: mfd: don't use memzero

For it doesn't exist on i386.

Cc: Ian Molton <spyro@f2s.com>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/mfd-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index d7d88ce053a..0454be4266c 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -36,7 +36,7 @@ static int mfd_add_device(struct platform_device *parent,
 	if (ret)
 		goto fail_device;
 
-	memzero(res, sizeof(res));
+	memset(res, 0, sizeof(res));
 	for (r = 0; r < cell->num_resources; r++) {
 		res[r].name = cell->resources[r].name;
 		res[r].flags = cell->resources[r].flags;
-- 
cgit v1.2.3


From 5df439ef06d4173357711a04740aa8bfcf50d621 Mon Sep 17 00:00:00 2001
From: Wang Chen <wangchen@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:45:23 -0700
Subject: flag parameters: fix compile error of sys_epoll_create1

GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      vmlinux
arch/x86/kernel/built-in.o: In function `sys_call_table':
(.rodata+0x8a4): undefined reference to `sys_epoll_create1'
make: *** [vmlinux] Error 1

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sys_ni.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index bd66ac5406f..55eca1594da 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -57,6 +57,7 @@ cond_syscall(compat_sys_set_robust_list);
 cond_syscall(sys_get_robust_list);
 cond_syscall(compat_sys_get_robust_list);
 cond_syscall(sys_epoll_create);
+cond_syscall(sys_epoll_create1);
 cond_syscall(sys_epoll_ctl);
 cond_syscall(sys_epoll_wait);
 cond_syscall(sys_epoll_pwait);
-- 
cgit v1.2.3


From e0deaff470900a4c3222ca7139f6c9639e26a2f5 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Fri, 25 Jul 2008 01:45:24 -0700
Subject: split the typecheck macros out of include/linux/kernel.h

Needed to fix up a recursive include snafu in
locking-add-typecheck-on-irqsave-and-friends-for-correct-flags.patch

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/kernel.h    | 21 +--------------------
 include/linux/typecheck.h | 24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+), 20 deletions(-)
 create mode 100644 include/linux/typecheck.h

diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index f9cd7a513f9..5c4b1251e11 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -14,6 +14,7 @@
 #include <linux/compiler.h>
 #include <linux/bitops.h>
 #include <linux/log2.h>
+#include <linux/typecheck.h>
 #include <asm/byteorder.h>
 #include <asm/bug.h>
 
@@ -441,26 +442,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
 	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
 	(type *)( (char *)__mptr - offsetof(type,member) );})
 
-/*
- * Check at compile time that something is of a particular type.
- * Always evaluates to 1 so you may use it easily in comparisons.
- */
-#define typecheck(type,x) \
-({	type __dummy; \
-	typeof(x) __dummy2; \
-	(void)(&__dummy == &__dummy2); \
-	1; \
-})
-
-/*
- * Check at compile time that 'function' is a certain type, or is a pointer
- * to that type (needs to use typedef for the function type.)
- */
-#define typecheck_fn(type,function) \
-({	typeof(type) __tmp = function; \
-	(void)__tmp; \
-})
-
 struct sysinfo;
 extern int do_sysinfo(struct sysinfo *info);
 
diff --git a/include/linux/typecheck.h b/include/linux/typecheck.h
new file mode 100644
index 00000000000..eb5b74a575b
--- /dev/null
+++ b/include/linux/typecheck.h
@@ -0,0 +1,24 @@
+#ifndef TYPECHECK_H_INCLUDED
+#define TYPECHECK_H_INCLUDED
+
+/*
+ * Check at compile time that something is of a particular type.
+ * Always evaluates to 1 so you may use it easily in comparisons.
+ */
+#define typecheck(type,x) \
+({	type __dummy; \
+	typeof(x) __dummy2; \
+	(void)(&__dummy == &__dummy2); \
+	1; \
+})
+
+/*
+ * Check at compile time that 'function' is a certain type, or is a pointer
+ * to that type (needs to use typedef for the function type.)
+ */
+#define typecheck_fn(type,function) \
+({	typeof(type) __tmp = function; \
+	(void)__tmp; \
+})
+
+#endif		/* TYPECHECK_H_INCLUDED */
-- 
cgit v1.2.3


From 3f307891ce0e7b0438c432af1aacd656a092ff45 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Fri, 25 Jul 2008 01:45:25 -0700
Subject: locking: add typecheck on irqsave and friends for correct flags

There haave been several areas in the kernel where an int has been used for
flags in local_irq_save() and friends instead of a long.  This can cause some
hard to debug problems on some architectures.

This patch adds a typecheck inside the irqsave and restore functions to flag
these cases.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/irqflags.h | 54 ++++++++++++++++++++++++++----------
 include/linux/spinlock.h | 72 +++++++++++++++++++++++++++++++++++++-----------
 2 files changed, 95 insertions(+), 31 deletions(-)

diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h
index 2b1c2e58566..74bde13224c 100644
--- a/include/linux/irqflags.h
+++ b/include/linux/irqflags.h
@@ -11,6 +11,8 @@
 #ifndef _LINUX_TRACE_IRQFLAGS_H
 #define _LINUX_TRACE_IRQFLAGS_H
 
+#include <linux/typecheck.h>
+
 #ifdef CONFIG_TRACE_IRQFLAGS
   extern void trace_softirqs_on(unsigned long ip);
   extern void trace_softirqs_off(unsigned long ip);
@@ -58,18 +60,24 @@
 	do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
 #define local_irq_disable() \
 	do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0)
-#define local_irq_save(flags) \
-	do { raw_local_irq_save(flags); trace_hardirqs_off(); } while (0)
+#define local_irq_save(flags)				\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		raw_local_irq_save(flags);		\
+		trace_hardirqs_off();			\
+	} while (0)
 
-#define local_irq_restore(flags)				\
-	do {							\
-		if (raw_irqs_disabled_flags(flags)) {		\
-			raw_local_irq_restore(flags);		\
-			trace_hardirqs_off();			\
-		} else {					\
-			trace_hardirqs_on();			\
-			raw_local_irq_restore(flags);		\
-		}						\
+
+#define local_irq_restore(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		if (raw_irqs_disabled_flags(flags)) {	\
+			raw_local_irq_restore(flags);	\
+			trace_hardirqs_off();		\
+		} else {				\
+			trace_hardirqs_on();		\
+			raw_local_irq_restore(flags);	\
+		}					\
 	} while (0)
 #else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */
 /*
@@ -78,8 +86,16 @@
  */
 # define raw_local_irq_disable()	local_irq_disable()
 # define raw_local_irq_enable()		local_irq_enable()
-# define raw_local_irq_save(flags)	local_irq_save(flags)
-# define raw_local_irq_restore(flags)	local_irq_restore(flags)
+# define raw_local_irq_save(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		local_irq_save(flags);			\
+	} while (0)
+# define raw_local_irq_restore(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		local_irq_restore(flags);		\
+	} while (0)
 #endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
 
 #ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
@@ -89,7 +105,11 @@
 		raw_safe_halt();				\
 	} while (0)
 
-#define local_save_flags(flags)		raw_local_save_flags(flags)
+#define local_save_flags(flags)				\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		raw_local_save_flags(flags);		\
+	} while (0)
 
 #define irqs_disabled()						\
 ({								\
@@ -99,7 +119,11 @@
 	raw_irqs_disabled_flags(_flags);			\
 })
 
-#define irqs_disabled_flags(flags)	raw_irqs_disabled_flags(flags)
+#define irqs_disabled_flags(flags)		\
+({						\
+	typecheck(unsigned long, flags);	\
+	raw_irqs_disabled_flags(flags);		\
+})
 #endif		/* CONFIG_X86 */
 
 #endif
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index d311a090fae..61e5610ad16 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -46,6 +46,7 @@
  *  linux/spinlock.h:     builds the final spin_*() APIs.
  */
 
+#include <linux/typecheck.h>
 #include <linux/preempt.h>
 #include <linux/linkage.h>
 #include <linux/compiler.h>
@@ -191,23 +192,53 @@ do {								\
 
 #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
 
-#define spin_lock_irqsave(lock, flags)	flags = _spin_lock_irqsave(lock)
-#define read_lock_irqsave(lock, flags)	flags = _read_lock_irqsave(lock)
-#define write_lock_irqsave(lock, flags)	flags = _write_lock_irqsave(lock)
+#define spin_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _spin_lock_irqsave(lock);	\
+	} while (0)
+#define read_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _read_lock_irqsave(lock);	\
+	} while (0)
+#define write_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _write_lock_irqsave(lock);	\
+	} while (0)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
-#define spin_lock_irqsave_nested(lock, flags, subclass) \
-	flags = _spin_lock_irqsave_nested(lock, subclass)
+#define spin_lock_irqsave_nested(lock, flags, subclass)			\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		flags = _spin_lock_irqsave_nested(lock, subclass);	\
+	} while (0)
 #else
-#define spin_lock_irqsave_nested(lock, flags, subclass) \
-	flags = _spin_lock_irqsave(lock)
+#define spin_lock_irqsave_nested(lock, flags, subclass)			\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		flags = _spin_lock_irqsave(lock);			\
+	} while (0)
 #endif
 
 #else
 
-#define spin_lock_irqsave(lock, flags)	_spin_lock_irqsave(lock, flags)
-#define read_lock_irqsave(lock, flags)	_read_lock_irqsave(lock, flags)
-#define write_lock_irqsave(lock, flags)	_write_lock_irqsave(lock, flags)
+#define spin_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_spin_lock_irqsave(lock, flags);	\
+	} while (0)
+#define read_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_read_lock_irqsave(lock, flags);	\
+	} while (0)
+#define write_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_write_lock_irqsave(lock, flags);	\
+	} while (0)
 #define spin_lock_irqsave_nested(lock, flags, subclass)	\
 	spin_lock_irqsave(lock, flags)
 
@@ -260,16 +291,25 @@ do {						\
 } while (0)
 #endif
 
-#define spin_unlock_irqrestore(lock, flags) \
-					_spin_unlock_irqrestore(lock, flags)
+#define spin_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_spin_unlock_irqrestore(lock, flags);	\
+	} while (0)
 #define spin_unlock_bh(lock)		_spin_unlock_bh(lock)
 
-#define read_unlock_irqrestore(lock, flags) \
-					_read_unlock_irqrestore(lock, flags)
+#define read_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_read_unlock_irqrestore(lock, flags);	\
+	} while (0)
 #define read_unlock_bh(lock)		_read_unlock_bh(lock)
 
-#define write_unlock_irqrestore(lock, flags) \
-					_write_unlock_irqrestore(lock, flags)
+#define write_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_write_unlock_irqrestore(lock, flags);	\
+	} while (0)
 #define write_unlock_bh(lock)		_write_unlock_bh(lock)
 
 #define spin_trylock_bh(lock)	__cond_lock(lock, _spin_trylock_bh(lock))
-- 
cgit v1.2.3


From b7bbf8fa6ba329b3552b75a0716f5fbc6f839499 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 25 Jul 2008 01:45:25 -0700
Subject: fs: ldm.[ch] use get_unaligned_* helpers

Replace the private BE16/BE32/BE64 macros with direct calls to
get_unaligned_be16/32/64.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/partitions/ldm.c | 70 ++++++++++++++++++++++++++---------------------------
 fs/partitions/ldm.h |  5 ----
 2 files changed, 35 insertions(+), 40 deletions(-)

diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
index 0fdda2e8a4c..8652fb99e96 100644
--- a/fs/partitions/ldm.c
+++ b/fs/partitions/ldm.c
@@ -133,17 +133,17 @@ static bool ldm_parse_privhead(const u8 *data, struct privhead *ph)
 	bool is_vista = false;
 
 	BUG_ON(!data || !ph);
-	if (MAGIC_PRIVHEAD != BE64(data)) {
+	if (MAGIC_PRIVHEAD != get_unaligned_be64(data)) {
 		ldm_error("Cannot find PRIVHEAD structure. LDM database is"
 			" corrupt. Aborting.");
 		return false;
 	}
-	ph->ver_major = BE16(data + 0x000C);
-	ph->ver_minor = BE16(data + 0x000E);
-	ph->logical_disk_start = BE64(data + 0x011B);
-	ph->logical_disk_size = BE64(data + 0x0123);
-	ph->config_start = BE64(data + 0x012B);
-	ph->config_size = BE64(data + 0x0133);
+	ph->ver_major = get_unaligned_be16(data + 0x000C);
+	ph->ver_minor = get_unaligned_be16(data + 0x000E);
+	ph->logical_disk_start = get_unaligned_be64(data + 0x011B);
+	ph->logical_disk_size = get_unaligned_be64(data + 0x0123);
+	ph->config_start = get_unaligned_be64(data + 0x012B);
+	ph->config_size = get_unaligned_be64(data + 0x0133);
 	/* Version 2.11 is Win2k/XP and version 2.12 is Vista. */
 	if (ph->ver_major == 2 && ph->ver_minor == 12)
 		is_vista = true;
@@ -191,14 +191,14 @@ static bool ldm_parse_tocblock (const u8 *data, struct tocblock *toc)
 {
 	BUG_ON (!data || !toc);
 
-	if (MAGIC_TOCBLOCK != BE64 (data)) {
+	if (MAGIC_TOCBLOCK != get_unaligned_be64(data)) {
 		ldm_crit ("Cannot find TOCBLOCK, database may be corrupt.");
 		return false;
 	}
 	strncpy (toc->bitmap1_name, data + 0x24, sizeof (toc->bitmap1_name));
 	toc->bitmap1_name[sizeof (toc->bitmap1_name) - 1] = 0;
-	toc->bitmap1_start = BE64 (data + 0x2E);
-	toc->bitmap1_size  = BE64 (data + 0x36);
+	toc->bitmap1_start = get_unaligned_be64(data + 0x2E);
+	toc->bitmap1_size  = get_unaligned_be64(data + 0x36);
 
 	if (strncmp (toc->bitmap1_name, TOC_BITMAP1,
 			sizeof (toc->bitmap1_name)) != 0) {
@@ -208,8 +208,8 @@ static bool ldm_parse_tocblock (const u8 *data, struct tocblock *toc)
 	}
 	strncpy (toc->bitmap2_name, data + 0x46, sizeof (toc->bitmap2_name));
 	toc->bitmap2_name[sizeof (toc->bitmap2_name) - 1] = 0;
-	toc->bitmap2_start = BE64 (data + 0x50);
-	toc->bitmap2_size  = BE64 (data + 0x58);
+	toc->bitmap2_start = get_unaligned_be64(data + 0x50);
+	toc->bitmap2_size  = get_unaligned_be64(data + 0x58);
 	if (strncmp (toc->bitmap2_name, TOC_BITMAP2,
 			sizeof (toc->bitmap2_name)) != 0) {
 		ldm_crit ("TOCBLOCK's second bitmap is '%s', should be '%s'.",
@@ -237,22 +237,22 @@ static bool ldm_parse_vmdb (const u8 *data, struct vmdb *vm)
 {
 	BUG_ON (!data || !vm);
 
-	if (MAGIC_VMDB != BE32 (data)) {
+	if (MAGIC_VMDB != get_unaligned_be32(data)) {
 		ldm_crit ("Cannot find the VMDB, database may be corrupt.");
 		return false;
 	}
 
-	vm->ver_major = BE16 (data + 0x12);
-	vm->ver_minor = BE16 (data + 0x14);
+	vm->ver_major = get_unaligned_be16(data + 0x12);
+	vm->ver_minor = get_unaligned_be16(data + 0x14);
 	if ((vm->ver_major != 4) || (vm->ver_minor != 10)) {
 		ldm_error ("Expected VMDB version %d.%d, got %d.%d. "
 			"Aborting.", 4, 10, vm->ver_major, vm->ver_minor);
 		return false;
 	}
 
-	vm->vblk_size     = BE32 (data + 0x08);
-	vm->vblk_offset   = BE32 (data + 0x0C);
-	vm->last_vblk_seq = BE32 (data + 0x04);
+	vm->vblk_size     = get_unaligned_be32(data + 0x08);
+	vm->vblk_offset   = get_unaligned_be32(data + 0x0C);
+	vm->last_vblk_seq = get_unaligned_be32(data + 0x04);
 
 	ldm_debug ("Parsed VMDB successfully.");
 	return true;
@@ -507,7 +507,7 @@ static bool ldm_validate_vmdb (struct block_device *bdev, unsigned long base,
 		goto out;				/* Already logged */
 
 	/* Are there uncommitted transactions? */
-	if (BE16(data + 0x10) != 0x01) {
+	if (get_unaligned_be16(data + 0x10) != 0x01) {
 		ldm_crit ("Database is not in a consistent state.  Aborting.");
 		goto out;
 	}
@@ -802,7 +802,7 @@ static bool ldm_parse_cmp3 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_CMP3;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	comp = &vb->vblk.comp;
@@ -851,7 +851,7 @@ static int ldm_parse_dgr3 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_DGR3;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	dgrp = &vb->vblk.dgrp;
@@ -895,7 +895,7 @@ static bool ldm_parse_dgr4 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_DGR4;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	dgrp = &vb->vblk.dgrp;
@@ -931,7 +931,7 @@ static bool ldm_parse_dsk3 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_DSK3;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	disk = &vb->vblk.disk;
@@ -968,7 +968,7 @@ static bool ldm_parse_dsk4 (const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 
 	len += VBLK_SIZE_DSK4;
-	if (len != BE32 (buffer + 0x14))
+	if (len != get_unaligned_be32(buffer + 0x14))
 		return false;
 
 	disk = &vb->vblk.disk;
@@ -1034,14 +1034,14 @@ static bool ldm_parse_prt3(const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 	}
 	len += VBLK_SIZE_PRT3;
-	if (len > BE32(buffer + 0x14)) {
+	if (len > get_unaligned_be32(buffer + 0x14)) {
 		ldm_error("len %d > BE32(buffer + 0x14) %d", len,
-				BE32(buffer + 0x14));
+				get_unaligned_be32(buffer + 0x14));
 		return false;
 	}
 	part = &vb->vblk.part;
-	part->start = BE64(buffer + 0x24 + r_name);
-	part->volume_offset = BE64(buffer + 0x2C + r_name);
+	part->start = get_unaligned_be64(buffer + 0x24 + r_name);
+	part->volume_offset = get_unaligned_be64(buffer + 0x2C + r_name);
 	part->size = ldm_get_vnum(buffer + 0x34 + r_name);
 	part->parent_id = ldm_get_vnum(buffer + 0x34 + r_size);
 	part->disk_id = ldm_get_vnum(buffer + 0x34 + r_parent);
@@ -1139,9 +1139,9 @@ static bool ldm_parse_vol5(const u8 *buffer, int buflen, struct vblk *vb)
 		return false;
 	}
 	len += VBLK_SIZE_VOL5;
-	if (len > BE32(buffer + 0x14)) {
+	if (len > get_unaligned_be32(buffer + 0x14)) {
 		ldm_error("len %d > BE32(buffer + 0x14) %d", len,
-				BE32(buffer + 0x14));
+				get_unaligned_be32(buffer + 0x14));
 		return false;
 	}
 	volu = &vb->vblk.volu;
@@ -1294,9 +1294,9 @@ static bool ldm_frag_add (const u8 *data, int size, struct list_head *frags)
 
 	BUG_ON (!data || !frags);
 
-	group = BE32 (data + 0x08);
-	rec   = BE16 (data + 0x0C);
-	num   = BE16 (data + 0x0E);
+	group = get_unaligned_be32(data + 0x08);
+	rec   = get_unaligned_be16(data + 0x0C);
+	num   = get_unaligned_be16(data + 0x0E);
 	if ((num < 1) || (num > 4)) {
 		ldm_error ("A VBLK claims to have %d parts.", num);
 		return false;
@@ -1425,12 +1425,12 @@ static bool ldm_get_vblks (struct block_device *bdev, unsigned long base,
 		}
 
 		for (v = 0; v < perbuf; v++, data+=size) {  /* For each vblk */
-			if (MAGIC_VBLK != BE32 (data)) {
+			if (MAGIC_VBLK != get_unaligned_be32(data)) {
 				ldm_error ("Expected to find a VBLK.");
 				goto out;
 			}
 
-			recs = BE16 (data + 0x0E);	/* Number of records */
+			recs = get_unaligned_be16(data + 0x0E);	/* Number of records */
 			if (recs == 1) {
 				if (!ldm_ldmdb_add (data, size, ldb))
 					goto out;	/* Already logged */
diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h
index 80f63b5fdd9..30e08e809c1 100644
--- a/fs/partitions/ldm.h
+++ b/fs/partitions/ldm.h
@@ -98,11 +98,6 @@ struct parsed_partitions;
 #define TOC_BITMAP1		"config"	/* Names of the two defined */
 #define TOC_BITMAP2		"log"		/* bitmaps in the TOCBLOCK. */
 
-/* Most numbers we deal with are big-endian and won't be aligned. */
-#define BE16(x)			((u16)be16_to_cpu(get_unaligned((__be16*)(x))))
-#define BE32(x)			((u32)be32_to_cpu(get_unaligned((__be32*)(x))))
-#define BE64(x)			((u64)be64_to_cpu(get_unaligned((__be64*)(x))))
-
 /* Borrowed from msdos.c */
 #define SYS_IND(p)		(get_unaligned(&(p)->sys_ind))
 
-- 
cgit v1.2.3


From 8b5ac31e27135a6f2c210c40d03bf8f1b3a86b77 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 25 Jul 2008 01:45:26 -0700
Subject: include: use get/put_unaligned_* helpers

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/reiserfs_fs.h      |  4 ++--
 include/linux/smb_fs.h           | 19 +++++++------------
 include/net/ieee80211_radiotap.h |  2 +-
 3 files changed, 10 insertions(+), 15 deletions(-)

diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 4aacaeecb56..e9963af16cd 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -526,8 +526,8 @@ struct item_head {
 ** p is the array of __u32, i is the index into the array, v is the value
 ** to store there.
 */
-#define get_block_num(p, i) le32_to_cpu(get_unaligned((p) + (i)))
-#define put_block_num(p, i, v) put_unaligned(cpu_to_le32(v), (p) + (i))
+#define get_block_num(p, i) get_unaligned_le32((p) + (i))
+#define put_block_num(p, i, v) put_unaligned_le32((v), (p) + (i))
 
 //
 // in old version uniqueness field shows key type
diff --git a/include/linux/smb_fs.h b/include/linux/smb_fs.h
index 2c5cd55f44f..923cd8a247b 100644
--- a/include/linux/smb_fs.h
+++ b/include/linux/smb_fs.h
@@ -43,18 +43,13 @@ static inline struct smb_inode_info *SMB_I(struct inode *inode)
 }
 
 /* macro names are short for word, double-word, long value (?) */
-#define WVAL(buf,pos) \
-	(le16_to_cpu(get_unaligned((__le16 *)((u8 *)(buf) + (pos)))))
-#define DVAL(buf,pos) \
-	(le32_to_cpu(get_unaligned((__le32 *)((u8 *)(buf) + (pos)))))
-#define LVAL(buf,pos) \
-	(le64_to_cpu(get_unaligned((__le64 *)((u8 *)(buf) + (pos)))))
-#define WSET(buf,pos,val) \
-	put_unaligned(cpu_to_le16((u16)(val)), (__le16 *)((u8 *)(buf) + (pos)))
-#define DSET(buf,pos,val) \
-	put_unaligned(cpu_to_le32((u32)(val)), (__le32 *)((u8 *)(buf) + (pos)))
-#define LSET(buf,pos,val) \
-	put_unaligned(cpu_to_le64((u64)(val)), (__le64 *)((u8 *)(buf) + (pos)))
+#define WVAL(buf, pos) (get_unaligned_le16((u8 *)(buf) + (pos)))
+#define DVAL(buf, pos) (get_unaligned_le32((u8 *)(buf) + (pos)))
+#define LVAL(buf, pos) (get_unaligned_le64((u8 *)(buf) + (pos)))
+
+#define WSET(buf, pos, val) put_unaligned_le16((val), (u8 *)(buf) + (pos))
+#define DSET(buf, pos, val) put_unaligned_le32((val), (u8 *)(buf) + (pos))
+#define LSET(buf, pos, val) put_unaligned_le64((val), (u8 *)(buf) + (pos))
 
 /* where to find the base of the SMB packet proper */
 #define smb_base(buf) ((u8 *)(((u8 *)(buf))+4))
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index dfd8bf66ce2..d364fd594ea 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -262,7 +262,7 @@ static inline int ieee80211_get_radiotap_len(unsigned char *data)
 	struct ieee80211_radiotap_header *hdr =
 		(struct ieee80211_radiotap_header *)data;
 
-	return le16_to_cpu(get_unaligned(&hdr->it_len));
+	return get_unaligned_le16(&hdr->it_len);
 }
 
 #endif				/* IEEE80211_RADIOTAP_H */
-- 
cgit v1.2.3


From 545e400619b24b6b17b7f1f1e838e9ff6d036949 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 25 Jul 2008 01:45:27 -0700
Subject: lzo: use get/put_unaligned_* helpers

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/lzo/lzo1x_decompress.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c
index 77f0f9b775a..5dc6b29c157 100644
--- a/lib/lzo/lzo1x_decompress.c
+++ b/lib/lzo/lzo1x_decompress.c
@@ -138,8 +138,7 @@ match:
 					t += 31 + *ip++;
 				}
 				m_pos = op - 1;
-				m_pos -= le16_to_cpu(get_unaligned(
-					(const unsigned short *)ip)) >> 2;
+				m_pos -= get_unaligned_le16(ip) >> 2;
 				ip += 2;
 			} else if (t >= 16) {
 				m_pos = op;
@@ -157,8 +156,7 @@ match:
 					}
 					t += 7 + *ip++;
 				}
-				m_pos -= le16_to_cpu(get_unaligned(
-					(const unsigned short *)ip)) >> 2;
+				m_pos -= get_unaligned_le16(ip) >> 2;
 				ip += 2;
 				if (m_pos == op)
 					goto eof_found;
-- 
cgit v1.2.3


From 585e93ae83b80c874bf4eb50a239027cef5db4af Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@redhat.com>
Date: Fri, 25 Jul 2008 01:45:27 -0700
Subject: find dynamic stack allocations in checkstack.pl

Currently, checkstack.pl only looks for fixed subtractions from the stack
pointer.  However, things like this:

void function(int size)
{
        char stackbuster[size << 2];
...

are certainly worth pointing out, I think.

This could perhaps be done more cleanly, and the following patch only
adds "dynamic" REs for x86 and x86_64, but it works:

0x00b0 crypto_cbc_decrypt_inplace [cbc]:                Dynamic (%rax)
0x00ad crypto_pcbc_decrypt_inplace [pcbc]:              Dynamic (%rax)
0x02f6 crypto_pcbc_encrypt_inplace [pcbc]:              Dynamic (%rax)
0x036c _crypto_xcbc_digest_setkey [xcbc]:               Dynamic (%rax)
...

(Inspired by Keith Owens' old stack-check script)

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkstack.pl | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index 340ad692051..358f96c75b4 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -26,8 +26,12 @@
 # $& (whole re) matches the complete objdump line with the stack growth
 # $1 (first bracket) matches the size of the stack growth
 #
+# $dre is similar, but for dynamic stack redutions:
+# $& (whole re) matches the complete objdump line with the stack growth
+# $1 (first bracket) matches the dynamic amount of the stack growth
+#
 # use anything else and feel the pain ;)
-my (@stack, $re, $x, $xs);
+my (@stack, $re, $dre, $x, $xs);
 {
 	my $arch = shift;
 	if ($arch eq "") {
@@ -46,9 +50,11 @@ my (@stack, $re, $x, $xs);
 	} elsif ($arch =~ /^i[3456]86$/) {
 		#c0105234:       81 ec ac 05 00 00       sub    $0x5ac,%esp
 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%esp$/o;
+		$dre = qr/^.*[as][du][db]    (%.*),\%esp$/o;
 	} elsif ($arch eq 'x86_64') {
 		#    2f60:	48 81 ec e8 05 00 00 	sub    $0x5e8,%rsp
 		$re = qr/^.*[as][du][db]    \$(0x$x{1,8}),\%rsp$/o;
+		$dre = qr/^.*[as][du][db]    (\%.*),\%rsp$/o;
 	} elsif ($arch eq 'ia64') {
 		#e0000000044011fc:       01 0f fc 8c     adds r12=-384,r12
 		$re = qr/.*adds.*r12=-(([0-9]{2}|[3-9])[0-9]{2}),r12/o;
@@ -141,6 +147,22 @@ while (my $line = <STDIN>) {
 		next if ($size < 100);
 		push @stack, "$intro$size\n";
 	}
+	elsif (defined $dre && $line =~ m/$dre/) {
+		my $size = "Dynamic ($1)";
+
+		next if $line !~ m/^($xs*)/;
+		my $addr = $1;
+		$addr =~ s/ /0/g;
+		$addr = "0x$addr";
+
+		my $intro = "$addr $func [$file]:";
+		my $padlen = 56 - length($intro);
+		while ($padlen > 0) {
+			$intro .= '	';
+			$padlen -= 8;
+		}
+		push @stack, "$intro$size\n";
+	}
 }
 
 print sort bysize @stack;
-- 
cgit v1.2.3


From abddaec56ebb7911bbf0578a4636a74bd7376d92 Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@redhat.com>
Date: Fri, 25 Jul 2008 01:45:28 -0700
Subject: fix checkstack.pl arch detection

uname -m was leaving a newline in $arch, and not passing the tests.

Also, printing the unknown arch on failure is probably helpful.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkstack.pl | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index 358f96c75b4..3eca62566d6 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -36,6 +36,7 @@ my (@stack, $re, $dre, $x, $xs);
 	my $arch = shift;
 	if ($arch eq "") {
 		$arch = `uname -m`;
+		chomp($arch);
 	}
 
 	$x	= "[0-9a-f]";	# hex character
@@ -91,7 +92,7 @@ my (@stack, $re, $dre, $x, $xs);
 		#   0:   00 e8 38 01     LINK 0x4e0;
 		$re = qr/.*[[:space:]]LINK[[:space:]]*(0x$x{1,8})/o;
 	} else {
-		print("wrong or unknown architecture\n");
+		print("wrong or unknown architecture \"$arch\"\n");
 		exit
 	}
 }
-- 
cgit v1.2.3


From 82c8253ac27291d6c70114eb445c714359812a10 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:45:29 -0700
Subject: init/do_mounts.c should #include <linux/initrd.h>

Every file should include the headers containing the externs for its
global code (in this case for rd_doload).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/do_mounts.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/init/do_mounts.c b/init/do_mounts.c
index a1de1bf3d6b..f769fac4f4c 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -12,6 +12,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/fs.h>
+#include <linux/initrd.h>
 
 #include <linux/nfs_fs.h>
 #include <linux/nfs_fs_sb.h>
-- 
cgit v1.2.3


From b39c08cb692cb8898c30e0d8187c7cbe27cc905c Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Fri, 25 Jul 2008 01:45:29 -0700
Subject: Remove apparently unused fd1772.h header file.

This header file has been unused for quite some time, and the
corresponding source files appear to have been removed back in commit
99eb8a550dbccc0e1f6c7e866fe421810e0585f6 ("Remove the arm26 port")

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/fd1772.h | 80 --------------------------------------------------
 1 file changed, 80 deletions(-)
 delete mode 100644 include/linux/fd1772.h

diff --git a/include/linux/fd1772.h b/include/linux/fd1772.h
deleted file mode 100644
index 871d6e4c677..00000000000
--- a/include/linux/fd1772.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef _LINUX_FD1772REG_H
-#define _LINUX_FD1772REG_H
-
-/*
-** WD1772 stuff - originally from the M68K Linux
- * Modified for Archimedes by Dave Gilbert (gilbertd@cs.man.ac.uk)
- */
-
-/* register codes */
-
-#define FDC1772SELREG_STP   (0x80)   /* command/status register */
-#define FDC1772SELREG_TRA   (0x82)   /* track register */
-#define FDC1772SELREG_SEC   (0x84)   /* sector register */
-#define FDC1772SELREG_DTA   (0x86)   /* data register */
-
-/* register names for FDC1772_READ/WRITE macros */
-
-#define FDC1772REG_CMD         0
-#define FDC1772REG_STATUS      0
-#define FDC1772REG_TRACK       2
-#define FDC1772REG_SECTOR      4
-#define FDC1772REG_DATA                6
-
-/* command opcodes */
-
-#define FDC1772CMD_RESTORE  (0x00)   /*  -                   */
-#define FDC1772CMD_SEEK     (0x10)   /*   |                  */
-#define FDC1772CMD_STEP     (0x20)   /*   |  TYP 1 Commands  */
-#define FDC1772CMD_STIN     (0x40)   /*   |                  */
-#define FDC1772CMD_STOT     (0x60)   /*  -                   */
-#define FDC1772CMD_RDSEC    (0x80)   /*  -   TYP 2 Commands  */
-#define FDC1772CMD_WRSEC    (0xa0)   /*  -          "        */
-#define FDC1772CMD_RDADR    (0xc0)   /*  -                   */
-#define FDC1772CMD_RDTRA    (0xe0)   /*   |  TYP 3 Commands  */
-#define FDC1772CMD_WRTRA    (0xf0)   /*  -                   */
-#define FDC1772CMD_FORCI    (0xd0)   /*  -   TYP 4 Command   */
-
-/* command modifier bits */
-
-#define FDC1772CMDADD_SR6   (0x00)   /* step rate settings */
-#define FDC1772CMDADD_SR12  (0x01)
-#define FDC1772CMDADD_SR2   (0x02)
-#define FDC1772CMDADD_SR3   (0x03)
-#define FDC1772CMDADD_V     (0x04)   /* verify */
-#define FDC1772CMDADD_H     (0x08)   /* wait for spin-up */
-#define FDC1772CMDADD_U     (0x10)   /* update track register */
-#define FDC1772CMDADD_M     (0x10)   /* multiple sector access */
-#define FDC1772CMDADD_E     (0x04)   /* head settling flag */
-#define FDC1772CMDADD_P     (0x02)   /* precompensation */
-#define FDC1772CMDADD_A0    (0x01)   /* DAM flag */
-
-/* status register bits */
-
-#define        FDC1772STAT_MOTORON     (0x80)   /* motor on */
-#define        FDC1772STAT_WPROT       (0x40)   /* write protected (FDC1772CMD_WR*) */
-#define        FDC1772STAT_SPINUP      (0x20)   /* motor speed stable (Type I) */
-#define        FDC1772STAT_DELDAM      (0x20)   /* sector has deleted DAM (Type II+III) */
-#define        FDC1772STAT_RECNF       (0x10)   /* record not found */
-#define        FDC1772STAT_CRC         (0x08)   /* CRC error */
-#define        FDC1772STAT_TR00        (0x04)   /* Track 00 flag (Type I) */
-#define        FDC1772STAT_LOST        (0x04)   /* Lost Data (Type II+III) */
-#define        FDC1772STAT_IDX         (0x02)   /* Index status (Type I) */
-#define        FDC1772STAT_DRQ         (0x02)   /* DRQ status (Type II+III) */
-#define        FDC1772STAT_BUSY        (0x01)   /* FDC1772 is busy */
-
-
-/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1  1 -> Side 2 */
-#define DSKSIDE     (0x01)
-        
-#define DSKDRVNONE  (0x06)
-#define DSKDRV0     (0x02)
-#define DSKDRV1     (0x04)
-
-/* step rates */
-#define        FDC1772STEP_6   0x00
-#define        FDC1772STEP_12  0x01
-#define        FDC1772STEP_2   0x02
-#define        FDC1772STEP_3   0x03
-
-#endif
-- 
cgit v1.2.3


From cb345d7352aa9e692ef4b83c41d3e6e1cdb2f846 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Fri, 25 Jul 2008 01:45:30 -0700
Subject: init/: delete hard-coded setting and testing of BUILD_CRAMDISK

There seems to be little point in explicitly setting, then testing the macro
BUILD_CRAMDISK within the context of a single source file.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/do_mounts_rd.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index 46dfd64ae8f..470a328d145 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -10,8 +10,6 @@
 
 #include "do_mounts.h"
 
-#define BUILD_CRAMDISK
-
 int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
 
 static int __init prompt_ramdisk(char *str)
@@ -162,14 +160,8 @@ int __init rd_load_image(char *from)
 		goto done;
 
 	if (nblocks == 0) {
-#ifdef BUILD_CRAMDISK
 		if (crd_load(in_fd, out_fd) == 0)
 			goto successful_load;
-#else
-		printk(KERN_NOTICE
-		       "RAMDISK: Kernel does not support compressed "
-		       "RAM disk images\n");
-#endif
 		goto done;
 	}
 
@@ -267,8 +259,6 @@ int __init rd_load_disk(int n)
 	return rd_load_image("/dev/root");
 }
 
-#ifdef BUILD_CRAMDISK
-
 /*
  * gzip declarations
  */
@@ -425,5 +415,3 @@ static int __init crd_load(int in_fd, int out_fd)
 	kfree(window);
 	return result;
 }
-
-#endif  /* BUILD_CRAMDISK */
-- 
cgit v1.2.3


From fd193829744bc77392395cf8f47889235c97f0a3 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Fri, 25 Jul 2008 01:45:31 -0700
Subject: lib: allow memparse() to accept a NULL and ignorable second parm

Extend memparse() to allow the caller to use a NULL second parameter, which
would represent no interest in returning the address of the end of the parsed
string.

In numerous cases, callers invoke memparse() to parse a possibly-suffixed
string (such as "64K" or "2G" or whatever) and define a character pointer to
accept the end pointer being returned by memparse() even though they have no
interest in it and promptly throw it away.

This (backward-compatible) enhancement allows callers to use NULL in the cases
where they just don't care about getting back that end pointer.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/cmdline.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/lib/cmdline.c b/lib/cmdline.c
index f596c08d213..5ba8a942a47 100644
--- a/lib/cmdline.c
+++ b/lib/cmdline.c
@@ -116,7 +116,7 @@ char *get_options(const char *str, int nints, int *ints)
 /**
  *	memparse - parse a string with mem suffixes into a number
  *	@ptr: Where parse begins
- *	@retptr: (output) Pointer to next char after parse completes
+ *	@retptr: (output) Optional pointer to next char after parse completes
  *
  *	Parses a string into a number.  The number stored at @ptr is
  *	potentially suffixed with %K (for kilobytes, or 1024 bytes),
@@ -126,11 +126,13 @@ char *get_options(const char *str, int nints, int *ints)
  *	megabyte, or one gigabyte, respectively.
  */
 
-unsigned long long memparse (char *ptr, char **retptr)
+unsigned long long memparse(char *ptr, char **retptr)
 {
-	unsigned long long ret = simple_strtoull (ptr, retptr, 0);
+	char *endptr;	/* local pointer to end of parsed string */
 
-	switch (**retptr) {
+	unsigned long long ret = simple_strtoull(ptr, &endptr, 0);
+
+	switch (*endptr) {
 	case 'G':
 	case 'g':
 		ret <<= 10;
@@ -140,10 +142,14 @@ unsigned long long memparse (char *ptr, char **retptr)
 	case 'K':
 	case 'k':
 		ret <<= 10;
-		(*retptr)++;
+		endptr++;
 	default:
 		break;
 	}
+
+	if (retptr)
+		*retptr = endptr;
+
 	return ret;
 }
 
-- 
cgit v1.2.3


From e0ce0da9fefcc723dc006c35a7f91a32750abd40 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Fri, 25 Jul 2008 01:45:32 -0700
Subject: lists: remove a redundant conditional definition of list_add()

Remove the conditional surrounding the definition of list_add() from list.h
since, if you define CONFIG_DEBUG_LIST, the definition you will subsequently
pick up from lib/list_debug.c will be absolutely identical, at which point you
can remove that redundant definition from list_debug.c as well.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/list.h |  4 ----
 lib/list_debug.c     | 14 --------------
 2 files changed, 18 deletions(-)

diff --git a/include/linux/list.h b/include/linux/list.h
index 139ec41d9c2..453916bc041 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -61,14 +61,10 @@ extern void __list_add(struct list_head *new,
  * Insert a new entry after the specified head.
  * This is good for implementing stacks.
  */
-#ifndef CONFIG_DEBUG_LIST
 static inline void list_add(struct list_head *new, struct list_head *head)
 {
 	__list_add(new, head, head->next);
 }
-#else
-extern void list_add(struct list_head *new, struct list_head *head);
-#endif
 
 
 /**
diff --git a/lib/list_debug.c b/lib/list_debug.c
index 4350ba9655b..45c03fd608d 100644
--- a/lib/list_debug.c
+++ b/lib/list_debug.c
@@ -39,20 +39,6 @@ void __list_add(struct list_head *new,
 }
 EXPORT_SYMBOL(__list_add);
 
-/**
- * list_add - add a new entry
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- */
-void list_add(struct list_head *new, struct list_head *head)
-{
-	__list_add(new, head, head->next);
-}
-EXPORT_SYMBOL(list_add);
-
 /**
  * list_del - deletes entry from list.
  * @entry: the element to delete from the list.
-- 
cgit v1.2.3


From 58340a07c194e0aed7bc58b61ff24330bb2a409f Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Fri, 25 Jul 2008 01:45:33 -0700
Subject: introduce HAVE_EFFICIENT_UNALIGNED_ACCESS Kconfig symbol

In many cases, especially in networking, it can be beneficial to know at
compile time whether the architecture can do unaligned accesses efficiently.
This patch introduces a new Kconfig symbol

	HAVE_EFFICIENT_UNALIGNED_ACCESS

for that purpose and adds it to the powerpc and x86 architectures.  Also add
some documentation about alignment and networking, and especially one intended
use of this symbol.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Ingo Molnar <mingo@elte.hu> [x86 architecture part]
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/unaligned-memory-access.txt | 32 ++++++++++++++++++++++++++++---
 arch/Kconfig                              | 19 ++++++++++++++++++
 arch/powerpc/Kconfig                      |  1 +
 arch/x86/Kconfig                          |  1 +
 4 files changed, 50 insertions(+), 3 deletions(-)

diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt
index b0472ac5226..f866c72291b 100644
--- a/Documentation/unaligned-memory-access.txt
+++ b/Documentation/unaligned-memory-access.txt
@@ -218,9 +218,35 @@ If use of such macros is not convenient, another option is to use memcpy(),
 where the source or destination (or both) are of type u8* or unsigned char*.
 Due to the byte-wise nature of this operation, unaligned accesses are avoided.
 
+
+Alignment vs. Networking
+========================
+
+On architectures that require aligned loads, networking requires that the IP
+header is aligned on a four-byte boundary to optimise the IP stack. For
+regular ethernet hardware, the constant NET_IP_ALIGN is used. On most
+architectures this constant has the value 2 because the normal ethernet
+header is 14 bytes long, so in order to get proper alignment one needs to
+DMA to an address which can be expressed as 4*n + 2. One notable exception
+here is powerpc which defines NET_IP_ALIGN to 0 because DMA to unaligned
+addresses can be very expensive and dwarf the cost of unaligned loads.
+
+For some ethernet hardware that cannot DMA to unaligned addresses like
+4*n+2 or non-ethernet hardware, this can be a problem, and it is then
+required to copy the incoming frame into an aligned buffer. Because this is
+unnecessary on architectures that can do unaligned accesses, the code can be
+made dependent on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so:
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	skb = original skb
+#else
+	skb = copy skb
+#endif
+
 --
-Author: Daniel Drake <dsd@gentoo.org>
+Authors: Daniel Drake <dsd@gentoo.org>,
+         Johannes Berg <johannes@sipsolutions.net>
 With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
-Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock,
-Uli Kunitz, Vadim Lobanov
+Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz,
+Vadim Lobanov
 
diff --git a/arch/Kconfig b/arch/Kconfig
index 6093c0be58b..b0fabfa864f 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -27,6 +27,25 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config HAVE_EFFICIENT_UNALIGNED_ACCESS
+	def_bool n
+	help
+	  Some architectures are unable to perform unaligned accesses
+	  without the use of get_unaligned/put_unaligned. Others are
+	  unable to perform such accesses efficiently (e.g. trap on
+	  unaligned access and require fixing it up in the exception
+	  handler.)
+
+	  This symbol should be selected by an architecture if it can
+	  perform unaligned accesses efficiently to allow different
+	  code paths to be selected for these cases. Some network
+	  drivers, for example, could opt to not fix up alignment
+	  problems with received packets if doing so would not help
+	  much.
+
+	  See Documentation/unaligned-memory-access.txt for more
+	  information on the topic of unaligned memory accesses.
+
 config KRETPROBES
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a487671c282..de6b49cd6be 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -112,6 +112,7 @@ config PPC
 	select HAVE_FTRACE
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_KPROBES
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b2ddfcf0172..66f3ab05b18 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -28,6 +28,7 @@ config X86
 	select HAVE_FTRACE
 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
 	select HAVE_ARCH_KGDB if !X86_VOYAGER
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 
 config ARCH_DEFCONFIG
 	string
-- 
cgit v1.2.3


From 2fc9c4e18f94431e7eb77d97edb2a995b46fba55 Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Fri, 25 Jul 2008 01:45:34 -0700
Subject: kallsyms: fix potential overflow in binary search

This will probably never trigger... but it won't hurt to be careful.

http://googleresearch.blogspot.com/2006/06/extra-extra-read-all-about-it-nearly.html

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Joshua Bloch <jjb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/kallsyms.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 6fc0040f3e3..38fc10ac754 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -176,7 +176,7 @@ static unsigned long get_symbol_pos(unsigned long addr,
 	high = kallsyms_num_syms;
 
 	while (high - low > 1) {
-		mid = (low + high) / 2;
+		mid = low + (high - low) / 2;
 		if (kallsyms_addresses[mid] <= addr)
 			low = mid;
 		else
-- 
cgit v1.2.3


From 696adfe84c11c571a1e0863460ff0ec142b4e5a9 Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Fri, 25 Jul 2008 01:45:34 -0700
Subject: list_for_each_rcu must die: networking

All uses of list_for_each_rcu() can be profitably replaced by the
easier-to-use list_for_each_entry_rcu().  This patch makes this change for
networking, in preparation for removing the list_for_each_rcu() API
entirely.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 net/802/psnap.c     | 4 +---
 net/ipv4/af_inet.c  | 9 +++------
 net/ipv6/af_inet6.c | 9 +++------
 3 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/net/802/psnap.c b/net/802/psnap.c
index ea464393144..b3cfe5a14fc 100644
--- a/net/802/psnap.c
+++ b/net/802/psnap.c
@@ -31,11 +31,9 @@ static struct llc_sap *snap_sap;
  */
 static struct datalink_proto *find_snap_client(unsigned char *desc)
 {
-	struct list_head *entry;
 	struct datalink_proto *proto = NULL, *p;
 
-	list_for_each_rcu(entry, &snap_list) {
-		p = list_entry(entry, struct datalink_proto, node);
+	list_for_each_entry_rcu(p, &snap_list, node) {
 		if (!memcmp(p->type, desc, 5)) {
 			proto = p;
 			break;
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index dd919d84285..f440a9f5492 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -264,7 +264,6 @@ static inline int inet_netns_ok(struct net *net, int protocol)
 static int inet_create(struct net *net, struct socket *sock, int protocol)
 {
 	struct sock *sk;
-	struct list_head *p;
 	struct inet_protosw *answer;
 	struct inet_sock *inet;
 	struct proto *answer_prot;
@@ -281,13 +280,12 @@ static int inet_create(struct net *net, struct socket *sock, int protocol)
 	sock->state = SS_UNCONNECTED;
 
 	/* Look for the requested type/protocol pair. */
-	answer = NULL;
 lookup_protocol:
 	err = -ESOCKTNOSUPPORT;
 	rcu_read_lock();
-	list_for_each_rcu(p, &inetsw[sock->type]) {
-		answer = list_entry(p, struct inet_protosw, list);
+	list_for_each_entry_rcu(answer, &inetsw[sock->type], list) {
 
+		err = 0;
 		/* Check the non-wild match. */
 		if (protocol == answer->protocol) {
 			if (protocol != IPPROTO_IP)
@@ -302,10 +300,9 @@ lookup_protocol:
 				break;
 		}
 		err = -EPROTONOSUPPORT;
-		answer = NULL;
 	}
 
-	if (unlikely(answer == NULL)) {
+	if (unlikely(err)) {
 		if (try_loading_module < 2) {
 			rcu_read_unlock();
 			/*
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 3d828bc4b1c..60461ad7fa6 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -83,7 +83,6 @@ static int inet6_create(struct net *net, struct socket *sock, int protocol)
 	struct inet_sock *inet;
 	struct ipv6_pinfo *np;
 	struct sock *sk;
-	struct list_head *p;
 	struct inet_protosw *answer;
 	struct proto *answer_prot;
 	unsigned char answer_flags;
@@ -97,13 +96,12 @@ static int inet6_create(struct net *net, struct socket *sock, int protocol)
 		build_ehash_secret();
 
 	/* Look for the requested type/protocol pair. */
-	answer = NULL;
 lookup_protocol:
 	err = -ESOCKTNOSUPPORT;
 	rcu_read_lock();
-	list_for_each_rcu(p, &inetsw6[sock->type]) {
-		answer = list_entry(p, struct inet_protosw, list);
+	list_for_each_entry_rcu(answer, &inetsw6[sock->type], list) {
 
+		err = 0;
 		/* Check the non-wild match. */
 		if (protocol == answer->protocol) {
 			if (protocol != IPPROTO_IP)
@@ -118,10 +116,9 @@ lookup_protocol:
 				break;
 		}
 		err = -EPROTONOSUPPORT;
-		answer = NULL;
 	}
 
-	if (!answer) {
+	if (err) {
 		if (try_loading_module < 2) {
 			rcu_read_unlock();
 			/*
-- 
cgit v1.2.3


From b03f6489f9f27dc519a4c60ebf39cc7b8a58eae7 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:45:35 -0700
Subject: build kernel/profile.o only when requested

Build kernel/profile.o only if CONFIG_PROFILING is enabled.

This makes CONFIG_PROFILING=n kernels smaller.

As a bonus, some profile_tick() calls and one branch from schedule() are
now eliminated with CONFIG_PROFILING=n (but I doubt these are
measurable effects).

This patch changes the effects of CONFIG_PROFILING=n, but I don't think
having more than two choices would be the better choice.

This patch also adds the name of the first parameter to the prototypes
of profile_{hits,tick}() since I anyway had to add them for the dummy
functions.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/profile.h | 56 ++++++++++++++++++++++++++++++++++---------------
 kernel/Makefile         |  3 ++-
 kernel/profile.c        |  4 ----
 3 files changed, 41 insertions(+), 22 deletions(-)

diff --git a/include/linux/profile.h b/include/linux/profile.h
index 05c1cc73693..4081fa31081 100644
--- a/include/linux/profile.h
+++ b/include/linux/profile.h
@@ -8,8 +8,6 @@
 
 #include <asm/errno.h>
 
-extern int prof_on __read_mostly;
-
 #define CPU_PROFILING	1
 #define SCHED_PROFILING	2
 #define SLEEP_PROFILING	3
@@ -19,14 +17,29 @@ struct proc_dir_entry;
 struct pt_regs;
 struct notifier_block;
 
+#if defined(CONFIG_PROFILING) && defined(CONFIG_PROC_FS)
+void create_prof_cpu_mask(struct proc_dir_entry *);
+#else
+#define create_prof_cpu_mask(x)			do { (void)(x); } while (0)
+#endif
+
+enum profile_type {
+	PROFILE_TASK_EXIT,
+	PROFILE_MUNMAP
+};
+
+#ifdef CONFIG_PROFILING
+
+extern int prof_on __read_mostly;
+
 /* init basic kernel profiler */
 void __init profile_init(void);
-void profile_tick(int);
+void profile_tick(int type);
 
 /*
  * Add multiple profiler hits to a given address:
  */
-void profile_hits(int, void *ip, unsigned int nr_hits);
+void profile_hits(int type, void *ip, unsigned int nr_hits);
 
 /*
  * Single profiler hit:
@@ -40,19 +53,6 @@ static inline void profile_hit(int type, void *ip)
 		profile_hits(type, ip, 1);
 }
 
-#ifdef CONFIG_PROC_FS
-void create_prof_cpu_mask(struct proc_dir_entry *);
-#else
-#define create_prof_cpu_mask(x)			do { (void)(x); } while (0)
-#endif
-
-enum profile_type {
-	PROFILE_TASK_EXIT,
-	PROFILE_MUNMAP
-};
-
-#ifdef CONFIG_PROFILING
-
 struct task_struct;
 struct mm_struct;
 
@@ -80,6 +80,28 @@ struct pt_regs;
 
 #else
 
+#define prof_on 0
+
+static inline void profile_init(void)
+{
+	return;
+}
+
+static inline void profile_tick(int type)
+{
+	return;
+}
+
+static inline void profile_hits(int type, void *ip, unsigned int nr_hits)
+{
+	return;
+}
+
+static inline void profile_hit(int type, void *ip)
+{
+	return;
+}
+
 static inline int task_handoff_register(struct notifier_block * n)
 {
 	return -ENOSYS;
diff --git a/kernel/Makefile b/kernel/Makefile
index 15ab63ffe64..54f69837d35 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y     = sched.o fork.o exec_domain.o panic.o printk.o profile.o \
+obj-y     = sched.o fork.o exec_domain.o panic.o printk.o \
 	    cpu.o exit.o itimer.o time.o softirq.o resource.o \
 	    sysctl.o capability.o ptrace.o timer.o user.o \
 	    signal.o sys.o kmod.o workqueue.o pid.o \
@@ -24,6 +24,7 @@ CFLAGS_REMOVE_sched_clock.o = -pg
 CFLAGS_REMOVE_sched.o = -mno-spe -pg
 endif
 
+obj-$(CONFIG_PROFILING) += profile.o
 obj-$(CONFIG_SYSCTL_SYSCALL_CHECK) += sysctl_check.o
 obj-$(CONFIG_STACKTRACE) += stacktrace.o
 obj-y += time/
diff --git a/kernel/profile.c b/kernel/profile.c
index 58926411eb2..cd26bed4cc2 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -112,8 +112,6 @@ void __init profile_init(void)
 
 /* Profile event notifications */
 
-#ifdef CONFIG_PROFILING
-
 static BLOCKING_NOTIFIER_HEAD(task_exit_notifier);
 static ATOMIC_NOTIFIER_HEAD(task_free_notifier);
 static BLOCKING_NOTIFIER_HEAD(munmap_notifier);
@@ -203,8 +201,6 @@ void unregister_timer_hook(int (*hook)(struct pt_regs *))
 }
 EXPORT_SYMBOL_GPL(unregister_timer_hook);
 
-#endif /* CONFIG_PROFILING */
-
 
 #ifdef CONFIG_SMP
 /*
-- 
cgit v1.2.3


From cebbd3fb803603b12408458ba17c29ce1e15a5f2 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Fri, 25 Jul 2008 01:45:35 -0700
Subject: build-kernel-profileo-only-when-requested-cleanups

Cc: Adrian Bunk <bunk@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/profile.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/linux/profile.h b/include/linux/profile.h
index 4081fa31081..7e7087239af 100644
--- a/include/linux/profile.h
+++ b/include/linux/profile.h
@@ -18,9 +18,11 @@ struct pt_regs;
 struct notifier_block;
 
 #if defined(CONFIG_PROFILING) && defined(CONFIG_PROC_FS)
-void create_prof_cpu_mask(struct proc_dir_entry *);
+void create_prof_cpu_mask(struct proc_dir_entry *de);
 #else
-#define create_prof_cpu_mask(x)			do { (void)(x); } while (0)
+static inline void create_prof_cpu_mask(struct proc_dir_entry *de)
+{
+}
 #endif
 
 enum profile_type {
-- 
cgit v1.2.3


From f16695f4ac088cf7593e113574046d2d7e5af5eb Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:45:36 -0700
Subject: asm-generic/int-ll64.h: always provide __{s,u}64

Several compilers offer "long long" without claiming to support C99.

Considering how frequent __s64/__u64 are used our userspace headers are
anyway unusable without __s64/__u64 available.

Always offer __s64/__u64 to non-gcc non-C99 compilers - if they provide
"long long" that makes the headers compiling and if they don't they are
anyway screwed.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/int-ll64.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h
index 260948905e4..f9bc9ac29b3 100644
--- a/include/asm-generic/int-ll64.h
+++ b/include/asm-generic/int-ll64.h
@@ -26,7 +26,7 @@ typedef unsigned int __u32;
 #ifdef __GNUC__
 __extension__ typedef __signed__ long long __s64;
 __extension__ typedef unsigned long long __u64;
-#elif defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+#else
 typedef __signed__ long long __s64;
 typedef unsigned long long __u64;
 #endif
-- 
cgit v1.2.3


From f557d0996a6f9c06912528ea85e1dba0fb7d485f Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:45:37 -0700
Subject: remove some more tipar bits

Some bits were missed when the tipar driver was removed.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/00-INDEX              | 2 --
 Documentation/kernel-parameters.txt | 7 -------
 drivers/char/Makefile               | 1 -
 3 files changed, 10 deletions(-)

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 1977fab3865..6de71308a90 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -361,8 +361,6 @@ telephony/
 	- directory with info on telephony (e.g. voice over IP) support.
 time_interpolators.txt
 	- info on time interpolators.
-tipar.txt
-	- information about Parallel link cable for Texas Instruments handhelds.
 tty.txt
 	- guide to the locking policies of the tty layer.
 uml/
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 497a98dafda..e7bea3e8530 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2159,13 +2159,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			<deci-seconds>: poll all this frequency
 			0: no polling (default)
 
-	tipar.timeout=	[HW,PPT]
-			Set communications timeout in tenths of a second
-			(default 15).
-
-	tipar.delay=	[HW,PPT]
-			Set inter-bit delay in microseconds (default 10).
-
 	tmscsim=	[HW,SCSI]
 			See comment before function dc390_setup() in
 			drivers/scsi/tmscsim.c.
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index eb02c350680..f7a0d1a754f 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -64,7 +64,6 @@ obj-$(CONFIG_BRIQ_PANEL)	+= briq_panel.o
 obj-$(CONFIG_BFIN_OTP)		+= bfin-otp.o
 
 obj-$(CONFIG_PRINTER)		+= lp.o
-obj-$(CONFIG_TIPAR)		+= tipar.o
 
 obj-$(CONFIG_APM_EMULATION)	+= apm-emulation.o
 
-- 
cgit v1.2.3


From ac331d158e198d2a91a5b0a3ec4ca9991fdb57af Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:45:38 -0700
Subject: call_usermodehelper(): increase reliability

Presently call_usermodehelper_setup() uses GFP_ATOMIC.  but it can return
NULL _very_ easily.

GFP_ATOMIC is needed only when we can't sleep.  and, GFP_KERNEL is robust
and better.

thus, I add gfp_mask argument to call_usermodehelper_setup().

So, its callers pass the gfp_t as below:

call_usermodehelper() and call_usermodehelper_keys():
	depend on 'wait' argument.
call_usermodehelper_pipe():
	always GFP_KERNEL because always run under process context.
orderly_poweroff():
	pass to GFP_ATOMIC because may run under interrupt context.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Paul Menage" <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/kmod.h | 11 +++++++----
 kernel/kmod.c        |  9 +++++----
 kernel/sys.c         |  2 +-
 3 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 0509c4ce485..a1a91577813 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -19,6 +19,7 @@
  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/gfp.h>
 #include <linux/stddef.h>
 #include <linux/errno.h>
 #include <linux/compiler.h>
@@ -41,8 +42,8 @@ struct file;
 struct subprocess_info;
 
 /* Allocate a subprocess_info structure */
-struct subprocess_info *call_usermodehelper_setup(char *path,
-						  char **argv, char **envp);
+struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
+						  char **envp, gfp_t gfp_mask);
 
 /* Set various pieces of state into the subprocess_info structure */
 void call_usermodehelper_setkeys(struct subprocess_info *info,
@@ -69,8 +70,9 @@ static inline int
 call_usermodehelper(char *path, char **argv, char **envp, enum umh_wait wait)
 {
 	struct subprocess_info *info;
+	gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
 
-	info = call_usermodehelper_setup(path, argv, envp);
+	info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
 	if (info == NULL)
 		return -ENOMEM;
 	return call_usermodehelper_exec(info, wait);
@@ -81,8 +83,9 @@ call_usermodehelper_keys(char *path, char **argv, char **envp,
 			 struct key *session_keyring, enum umh_wait wait)
 {
 	struct subprocess_info *info;
+	gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
 
-	info = call_usermodehelper_setup(path, argv, envp);
+	info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
 	if (info == NULL)
 		return -ENOMEM;
 
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 2989f67c444..2456d1a0bef 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -352,16 +352,17 @@ static inline void register_pm_notifier_callback(void) {}
  * @path: path to usermode executable
  * @argv: arg vector for process
  * @envp: environment for process
+ * @gfp_mask: gfp mask for memory allocation
  *
  * Returns either %NULL on allocation failure, or a subprocess_info
  * structure.  This should be passed to call_usermodehelper_exec to
  * exec the process and free the structure.
  */
-struct subprocess_info *call_usermodehelper_setup(char *path,
-						  char **argv, char **envp)
+struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
+						  char **envp, gfp_t gfp_mask)
 {
 	struct subprocess_info *sub_info;
-	sub_info = kzalloc(sizeof(struct subprocess_info),  GFP_ATOMIC);
+	sub_info = kzalloc(sizeof(struct subprocess_info), gfp_mask);
 	if (!sub_info)
 		goto out;
 
@@ -494,7 +495,7 @@ int call_usermodehelper_pipe(char *path, char **argv, char **envp,
 	struct subprocess_info *sub_info;
 	int ret;
 
-	sub_info = call_usermodehelper_setup(path, argv, envp);
+	sub_info = call_usermodehelper_setup(path, argv, envp, GFP_KERNEL);
 	if (sub_info == NULL)
 		return -ENOMEM;
 
diff --git a/kernel/sys.c b/kernel/sys.c
index 14e97282eb6..6c218804604 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1795,7 +1795,7 @@ int orderly_poweroff(bool force)
 		goto out;
 	}
 
-	info = call_usermodehelper_setup(argv[0], argv, envp);
+	info = call_usermodehelper_setup(argv[0], argv, envp, GFP_ATOMIC);
 	if (info == NULL) {
 		argv_free(argv);
 		goto out;
-- 
cgit v1.2.3


From 62ec30d45ecbb85b5991474c8f04192697687495 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Fri, 25 Jul 2008 01:45:39 -0700
Subject: misc: add HP WMI laptop extras driver

This driver adds support for reading and configuring certain information
on modern HP laptops with WMI BIOS interfaces.  It supports enabling and
disabling the ambient light sensor, querying attached displays and hard
drive temperature, sending events on docking and querying the state of the
dock and toggling the state of the wifi, bluetooth and wwan hardware via
rfkill.  It also makes the little "(i)" button work on machines that send
that via WMI rather than via the keyboard controller.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/Kconfig  |  12 ++
 drivers/misc/Makefile |   1 +
 drivers/misc/hp-wmi.c | 494 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 507 insertions(+)
 create mode 100644 drivers/misc/hp-wmi.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d5bc288b1b0..1689c051f68 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -212,6 +212,18 @@ config TC1100_WMI
 	  This is a driver for the WMI extensions (wireless and bluetooth power
 	  control) of the HP Compaq TC1100 tablet.
 
+config HP_WMI
+       tristate "HP WMI extras"
+       depends on ACPI_WMI
+       depends on INPUT
+       depends on RFKILL
+       help
+         Say Y here if you want to support WMI-based hotkeys on HP laptops and
+	 to read data from WMI such as docking or ambient light sensor state.
+
+         To compile this driver as a module, choose M here: the module will
+         be called hp-wmi.
+
 config MSI_LAPTOP
         tristate "MSI Laptop Extras"
         depends on X86
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 688fe76135e..f5e273420c0 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
+obj-$(CONFIG_HP_WMI)		+= hp-wmi.o
 obj-$(CONFIG_TC1100_WMI)	+= tc1100-wmi.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
 obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
diff --git a/drivers/misc/hp-wmi.c b/drivers/misc/hp-wmi.c
new file mode 100644
index 00000000000..1dbcbcb323a
--- /dev/null
+++ b/drivers/misc/hp-wmi.c
@@ -0,0 +1,494 @@
+/*
+ * HP WMI hotkeys
+ *
+ * Copyright (C) 2008 Red Hat <mjg@redhat.com>
+ *
+ * Portions based on wistron_btns.c:
+ * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
+ * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org>
+ * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/rfkill.h>
+#include <linux/string.h>
+
+MODULE_AUTHOR("Matthew Garrett <mjg59@srcf.ucam.org>");
+MODULE_DESCRIPTION("HP laptop WMI hotkeys driver");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("wmi:95F24279-4D7B-4334-9387-ACCDC67EF61C");
+MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
+
+#define HPWMI_EVENT_GUID "95F24279-4D7B-4334-9387-ACCDC67EF61C"
+#define HPWMI_BIOS_GUID "5FB7F034-2C63-45e9-BE91-3D44E2C707E4"
+
+#define HPWMI_DISPLAY_QUERY 0x1
+#define HPWMI_HDDTEMP_QUERY 0x2
+#define HPWMI_ALS_QUERY 0x3
+#define HPWMI_DOCK_QUERY 0x4
+#define HPWMI_WIRELESS_QUERY 0x5
+
+static int __init hp_wmi_bios_setup(struct platform_device *device);
+static int __exit hp_wmi_bios_remove(struct platform_device *device);
+
+struct bios_args {
+	u32 signature;
+	u32 command;
+	u32 commandtype;
+	u32 datasize;
+	u32 data;
+};
+
+struct bios_return {
+	u32 sigpass;
+	u32 return_code;
+	u32 value;
+};
+
+struct key_entry {
+	char type;		/* See KE_* below */
+	u8 code;
+	u16 keycode;
+};
+
+enum { KE_KEY, KE_SW, KE_END };
+
+static struct key_entry hp_wmi_keymap[] = {
+	{KE_SW, 0x01, SW_DOCK},
+	{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
+	{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
+	{KE_KEY, 0x04, KEY_HELP},
+	{KE_END, 0}
+};
+
+static struct input_dev *hp_wmi_input_dev;
+static struct platform_device *hp_wmi_platform_dev;
+
+static struct rfkill *wifi_rfkill;
+static struct rfkill *bluetooth_rfkill;
+static struct rfkill *wwan_rfkill;
+
+static struct platform_driver hp_wmi_driver = {
+	.driver = {
+		   .name = "hp-wmi",
+		   .owner = THIS_MODULE,
+	},
+	.probe = hp_wmi_bios_setup,
+	.remove = hp_wmi_bios_remove,
+};
+
+static int hp_wmi_perform_query(int query, int write, int value)
+{
+	struct bios_return bios_return;
+	acpi_status status;
+	union acpi_object *obj;
+	struct bios_args args = {
+		.signature = 0x55434553,
+		.command = write ? 0x2 : 0x1,
+		.commandtype = query,
+		.datasize = write ? 0x4 : 0,
+		.data = value,
+	};
+	struct acpi_buffer input = { sizeof(struct bios_args), &args };
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+
+	status = wmi_evaluate_method(HPWMI_BIOS_GUID, 0, 0x3, &input, &output);
+
+	obj = output.pointer;
+
+	if (!obj || obj->type != ACPI_TYPE_BUFFER)
+		return -EINVAL;
+
+	bios_return = *((struct bios_return *)obj->buffer.pointer);
+	if (bios_return.return_code > 0)
+		return bios_return.return_code * -1;
+	else
+		return bios_return.value;
+}
+
+static int hp_wmi_display_state(void)
+{
+	return hp_wmi_perform_query(HPWMI_DISPLAY_QUERY, 0, 0);
+}
+
+static int hp_wmi_hddtemp_state(void)
+{
+	return hp_wmi_perform_query(HPWMI_HDDTEMP_QUERY, 0, 0);
+}
+
+static int hp_wmi_als_state(void)
+{
+	return hp_wmi_perform_query(HPWMI_ALS_QUERY, 0, 0);
+}
+
+static int hp_wmi_dock_state(void)
+{
+	return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
+}
+
+static int hp_wmi_wifi_set(void *data, enum rfkill_state state)
+{
+	if (state)
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x101);
+	else
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x100);
+}
+
+static int hp_wmi_bluetooth_set(void *data, enum rfkill_state state)
+{
+	if (state)
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x202);
+	else
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x200);
+}
+
+static int hp_wmi_wwan_set(void *data, enum rfkill_state state)
+{
+	if (state)
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x404);
+	else
+		return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, 0x400);
+}
+
+static int hp_wmi_wifi_state(void)
+{
+	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+
+	if (wireless & 0x100)
+		return 1;
+	else
+		return 0;
+}
+
+static int hp_wmi_bluetooth_state(void)
+{
+	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+
+	if (wireless & 0x10000)
+		return 1;
+	else
+		return 0;
+}
+
+static int hp_wmi_wwan_state(void)
+{
+	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+
+	if (wireless & 0x1000000)
+		return 1;
+	else
+		return 0;
+}
+
+static ssize_t show_display(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	int value = hp_wmi_display_state();
+	if (value < 0)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_hddtemp(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	int value = hp_wmi_hddtemp_state();
+	if (value < 0)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_als(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	int value = hp_wmi_als_state();
+	if (value < 0)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_dock(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	int value = hp_wmi_dock_state();
+	if (value < 0)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t set_als(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	u32 tmp = simple_strtoul(buf, NULL, 10);
+	hp_wmi_perform_query(HPWMI_ALS_QUERY, 1, tmp);
+	return count;
+}
+
+static DEVICE_ATTR(display, S_IRUGO, show_display, NULL);
+static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL);
+static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
+static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
+
+static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
+{
+	struct key_entry *key;
+
+	for (key = hp_wmi_keymap; key->type != KE_END; key++)
+		if (code == key->code)
+			return key;
+
+	return NULL;
+}
+
+static struct key_entry *hp_wmi_get_entry_by_keycode(int keycode)
+{
+	struct key_entry *key;
+
+	for (key = hp_wmi_keymap; key->type != KE_END; key++)
+		if (key->type == KE_KEY && keycode == key->keycode)
+			return key;
+
+	return NULL;
+}
+
+static int hp_wmi_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+{
+	struct key_entry *key = hp_wmi_get_entry_by_scancode(scancode);
+
+	if (key && key->type == KE_KEY) {
+		*keycode = key->keycode;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int hp_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+{
+	struct key_entry *key;
+	int old_keycode;
+
+	if (keycode < 0 || keycode > KEY_MAX)
+		return -EINVAL;
+
+	key = hp_wmi_get_entry_by_scancode(scancode);
+	if (key && key->type == KE_KEY) {
+		old_keycode = key->keycode;
+		key->keycode = keycode;
+		set_bit(keycode, dev->keybit);
+		if (!hp_wmi_get_entry_by_keycode(old_keycode))
+			clear_bit(old_keycode, dev->keybit);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+void hp_wmi_notify(u32 value, void *context)
+{
+	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
+	static struct key_entry *key;
+	union acpi_object *obj;
+
+	wmi_get_event_data(value, &response);
+
+	obj = (union acpi_object *)response.pointer;
+
+	if (obj && obj->type == ACPI_TYPE_BUFFER && obj->buffer.length == 8) {
+		int eventcode = *((u8 *) obj->buffer.pointer);
+		key = hp_wmi_get_entry_by_scancode(eventcode);
+		if (key) {
+			switch (key->type) {
+			case KE_KEY:
+				input_report_key(hp_wmi_input_dev,
+						 key->keycode, 1);
+				input_sync(hp_wmi_input_dev);
+				input_report_key(hp_wmi_input_dev,
+						 key->keycode, 0);
+				input_sync(hp_wmi_input_dev);
+				break;
+			case KE_SW:
+				input_report_switch(hp_wmi_input_dev,
+						    key->keycode,
+						    hp_wmi_dock_state());
+				input_sync(hp_wmi_input_dev);
+				break;
+			}
+		} else if (eventcode == 0x5) {
+			if (wifi_rfkill)
+				wifi_rfkill->state = hp_wmi_wifi_state();
+			if (bluetooth_rfkill)
+				bluetooth_rfkill->state =
+				    hp_wmi_bluetooth_state();
+			if (wwan_rfkill)
+				wwan_rfkill->state = hp_wmi_wwan_state();
+		} else
+			printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
+			       eventcode);
+	} else
+		printk(KERN_INFO "HP WMI: Unknown response received\n");
+}
+
+static int __init hp_wmi_input_setup(void)
+{
+	struct key_entry *key;
+	int err;
+
+	hp_wmi_input_dev = input_allocate_device();
+
+	hp_wmi_input_dev->name = "HP WMI hotkeys";
+	hp_wmi_input_dev->phys = "wmi/input0";
+	hp_wmi_input_dev->id.bustype = BUS_HOST;
+	hp_wmi_input_dev->getkeycode = hp_wmi_getkeycode;
+	hp_wmi_input_dev->setkeycode = hp_wmi_setkeycode;
+
+	for (key = hp_wmi_keymap; key->type != KE_END; key++) {
+		switch (key->type) {
+		case KE_KEY:
+			set_bit(EV_KEY, hp_wmi_input_dev->evbit);
+			set_bit(key->keycode, hp_wmi_input_dev->keybit);
+			break;
+		case KE_SW:
+			set_bit(EV_SW, hp_wmi_input_dev->evbit);
+			set_bit(key->keycode, hp_wmi_input_dev->swbit);
+			break;
+		}
+	}
+
+	err = input_register_device(hp_wmi_input_dev);
+
+	if (err) {
+		input_free_device(hp_wmi_input_dev);
+		return err;
+	}
+
+	return 0;
+}
+
+static void cleanup_sysfs(struct platform_device *device)
+{
+	device_remove_file(&device->dev, &dev_attr_display);
+	device_remove_file(&device->dev, &dev_attr_hddtemp);
+	device_remove_file(&device->dev, &dev_attr_als);
+	device_remove_file(&device->dev, &dev_attr_dock);
+}
+
+static int __init hp_wmi_bios_setup(struct platform_device *device)
+{
+	int err;
+
+	err = device_create_file(&device->dev, &dev_attr_display);
+	if (err)
+		goto add_sysfs_error;
+	err = device_create_file(&device->dev, &dev_attr_hddtemp);
+	if (err)
+		goto add_sysfs_error;
+	err = device_create_file(&device->dev, &dev_attr_als);
+	if (err)
+		goto add_sysfs_error;
+	err = device_create_file(&device->dev, &dev_attr_dock);
+	if (err)
+		goto add_sysfs_error;
+
+	wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
+	wifi_rfkill->name = "hp-wifi";
+	wifi_rfkill->state = hp_wmi_wifi_state();
+	wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
+	wifi_rfkill->user_claim_unsupported = 1;
+
+	bluetooth_rfkill = rfkill_allocate(&device->dev,
+					   RFKILL_TYPE_BLUETOOTH);
+	bluetooth_rfkill->name = "hp-bluetooth";
+	bluetooth_rfkill->state = hp_wmi_bluetooth_state();
+	bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
+	bluetooth_rfkill->user_claim_unsupported = 1;
+
+	wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WIMAX);
+	wwan_rfkill->name = "hp-wwan";
+	wwan_rfkill->state = hp_wmi_wwan_state();
+	wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
+	wwan_rfkill->user_claim_unsupported = 1;
+
+	rfkill_register(wifi_rfkill);
+	rfkill_register(bluetooth_rfkill);
+	rfkill_register(wwan_rfkill);
+
+	return 0;
+add_sysfs_error:
+	cleanup_sysfs(device);
+	return err;
+}
+
+static int __exit hp_wmi_bios_remove(struct platform_device *device)
+{
+	cleanup_sysfs(device);
+
+	rfkill_unregister(wifi_rfkill);
+	rfkill_unregister(bluetooth_rfkill);
+	rfkill_unregister(wwan_rfkill);
+
+	return 0;
+}
+
+static int __init hp_wmi_init(void)
+{
+	int err;
+
+	if (wmi_has_guid(HPWMI_EVENT_GUID)) {
+		err = wmi_install_notify_handler(HPWMI_EVENT_GUID,
+						 hp_wmi_notify, NULL);
+		if (!err)
+			hp_wmi_input_setup();
+	}
+
+	if (wmi_has_guid(HPWMI_BIOS_GUID)) {
+		err = platform_driver_register(&hp_wmi_driver);
+		if (err)
+			return 0;
+		hp_wmi_platform_dev = platform_device_alloc("hp-wmi", -1);
+		if (!hp_wmi_platform_dev) {
+			platform_driver_unregister(&hp_wmi_driver);
+			return 0;
+		}
+		platform_device_add(hp_wmi_platform_dev);
+	}
+
+	return 0;
+}
+
+static void __exit hp_wmi_exit(void)
+{
+	if (wmi_has_guid(HPWMI_EVENT_GUID)) {
+		wmi_remove_notify_handler(HPWMI_EVENT_GUID);
+		input_unregister_device(hp_wmi_input_dev);
+	}
+	if (hp_wmi_platform_dev) {
+		platform_device_del(hp_wmi_platform_dev);
+		platform_driver_unregister(&hp_wmi_driver);
+	}
+}
+
+module_init(hp_wmi_init);
+module_exit(hp_wmi_exit);
-- 
cgit v1.2.3


From b69c49b78457f681ecfb3147bd968434ee6559c1 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 25 Jul 2008 01:45:40 -0700
Subject: clean up duplicated alloc/free_thread_info

We duplicate alloc/free_thread_info defines on many platforms (the
majority uses __get_free_pages/free_pages).  This patch defines common
defines and removes these duplicated defines.
__HAVE_ARCH_THREAD_INFO_ALLOCATOR is introduced for platforms that do
something different.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-alpha/thread_info.h     |  4 +---
 include/asm-arm/thread_info.h       | 13 -------------
 include/asm-avr32/thread_info.h     |  4 ----
 include/asm-blackfin/thread_info.h  |  5 +----
 include/asm-cris/thread_info.h      |  2 ++
 include/asm-frv/thread_info.h       |  2 ++
 include/asm-h8300/thread_info.h     |  5 +----
 include/asm-ia64/thread_info.h      |  2 ++
 include/asm-m32r/thread_info.h      |  2 ++
 include/asm-m68k/thread_info.h      |  8 +-------
 include/asm-m68knommu/thread_info.h |  4 ----
 include/asm-mips/thread_info.h      |  2 ++
 include/asm-mn10300/thread_info.h   |  2 ++
 include/asm-parisc/thread_info.h    | 10 +++-------
 include/asm-powerpc/thread_info.h   | 14 +++-----------
 include/asm-s390/thread_info.h      |  5 +----
 include/asm-sh/thread_info.h        |  2 ++
 include/asm-sparc/thread_info_32.h  |  2 ++
 include/asm-sparc/thread_info_64.h  |  2 ++
 include/asm-um/thread_info.h        | 16 +---------------
 include/asm-x86/thread_info.h       |  2 ++
 include/asm-xtensa/thread_info.h    |  5 +----
 kernel/fork.c                       | 17 +++++++++++++++++
 23 files changed, 50 insertions(+), 80 deletions(-)

diff --git a/include/asm-alpha/thread_info.h b/include/asm-alpha/thread_info.h
index fb318519629..15fda434442 100644
--- a/include/asm-alpha/thread_info.h
+++ b/include/asm-alpha/thread_info.h
@@ -50,10 +50,8 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define current_thread_info()  __current_thread_info
 
 /* Thread information allocation.  */
+#define THREAD_SIZE_ORDER 1
 #define THREAD_SIZE (2*PAGE_SIZE)
-#define alloc_thread_info(tsk) \
-  ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h
index f5a66478631..d4be2d64616 100644
--- a/include/asm-arm/thread_info.h
+++ b/include/asm-arm/thread_info.h
@@ -97,19 +97,6 @@ static inline struct thread_info *current_thread_info(void)
 	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
 }
 
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) \
-	((struct thread_info *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, \
-		THREAD_SIZE_ORDER))
-#else
-#define alloc_thread_info(tsk) \
-	((struct thread_info *)__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#endif
-
-#define free_thread_info(info) \
-	free_pages((unsigned long)info, THREAD_SIZE_ORDER);
-
 #define thread_saved_pc(tsk)	\
 	((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
 #define thread_saved_fp(tsk)	\
diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
index df68631b7b2..294b25f9323 100644
--- a/include/asm-avr32/thread_info.h
+++ b/include/asm-avr32/thread_info.h
@@ -61,10 +61,6 @@ static inline struct thread_info *current_thread_info(void)
 	return (struct thread_info *)addr;
 }
 
-/* thread information allocation */
-#define alloc_thread_info(ti) \
-	((struct thread_info *) __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#define free_thread_info(ti) free_pages((unsigned long)(ti), 1)
 #define get_thread_info(ti) get_task_struct((ti)->task)
 #define put_thread_info(ti) put_task_struct((ti)->task)
 
diff --git a/include/asm-blackfin/thread_info.h b/include/asm-blackfin/thread_info.h
index bc2fe5accf2..642769329d1 100644
--- a/include/asm-blackfin/thread_info.h
+++ b/include/asm-blackfin/thread_info.h
@@ -42,6 +42,7 @@
 /*
  * Size of kernel stack for each process. This must be a power of 2...
  */
+#define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		8192	/* 2 pages */
 
 #ifndef __ASSEMBLY__
@@ -94,10 +95,6 @@ static inline struct thread_info *current_thread_info(void)
 	return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
 }
 
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, 1))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
 #endif				/* __ASSEMBLY__ */
 
 /*
diff --git a/include/asm-cris/thread_info.h b/include/asm-cris/thread_info.h
index 784668ab0fa..7efe1000f99 100644
--- a/include/asm-cris/thread_info.h
+++ b/include/asm-cris/thread_info.h
@@ -11,6 +11,8 @@
 
 #ifdef __KERNEL__
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifndef __ASSEMBLY__
 #include <asm/types.h>
 #include <asm/processor.h>
diff --git a/include/asm-frv/thread_info.h b/include/asm-frv/thread_info.h
index 348b8f1df17..b7ac6bf2844 100644
--- a/include/asm-frv/thread_info.h
+++ b/include/asm-frv/thread_info.h
@@ -82,6 +82,8 @@ register struct thread_info *__current_thread_info asm("gr15");
 
 #define current_thread_info() ({ __current_thread_info; })
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
diff --git a/include/asm-h8300/thread_info.h b/include/asm-h8300/thread_info.h
index 27bb95e2944..aafd4d322ec 100644
--- a/include/asm-h8300/thread_info.h
+++ b/include/asm-h8300/thread_info.h
@@ -49,6 +49,7 @@ struct thread_info {
 /*
  * Size of kernel stack for each process. This must be a power of 2...
  */
+#define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		8192	/* 2 pages */
 
 
@@ -65,10 +66,6 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, 1))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
index 2422ac61658..7c60fcdd2ef 100644
--- a/include/asm-ia64/thread_info.h
+++ b/include/asm-ia64/thread_info.h
@@ -54,6 +54,8 @@ struct thread_info {
 	},					\
 }
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifndef ASM_OFFSETS_C
 /* how to get the thread information struct from C */
 #define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
diff --git a/include/asm-m32r/thread_info.h b/include/asm-m32r/thread_info.h
index 1effcd0f5e6..8589d462df2 100644
--- a/include/asm-m32r/thread_info.h
+++ b/include/asm-m32r/thread_info.h
@@ -94,6 +94,8 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
diff --git a/include/asm-m68k/thread_info.h b/include/asm-m68k/thread_info.h
index d635a375248..abc002798a2 100644
--- a/include/asm-m68k/thread_info.h
+++ b/include/asm-m68k/thread_info.h
@@ -25,13 +25,7 @@ struct thread_info {
 }
 
 /* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */
-#if PAGE_SHIFT == 13 /* 8k machines */
-#define alloc_thread_info(tsk)   ((struct thread_info *)__get_free_pages(GFP_KERNEL,0))
-#define free_thread_info(ti)  free_pages((unsigned long)(ti),0)
-#else /* otherwise assume 4k pages */
-#define alloc_thread_info(tsk)   ((struct thread_info *)__get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti)  free_pages((unsigned long)(ti),1)
-#endif /* PAGE_SHIFT == 13 */
+#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT)
 
 #define init_thread_info	(init_task.thread.info)
 #define init_stack		(init_thread_union.stack)
diff --git a/include/asm-m68knommu/thread_info.h b/include/asm-m68knommu/thread_info.h
index 95996d978be..0c9bc095f3f 100644
--- a/include/asm-m68knommu/thread_info.h
+++ b/include/asm-m68knommu/thread_info.h
@@ -71,10 +71,6 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), THREAD_SIZE_ORDER)
 #endif /* __ASSEMBLY__ */
 
 #define	PREEMPT_ACTIVE	0x4000000
diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h
index b2772df1a1b..bb3060699df 100644
--- a/include/asm-mips/thread_info.h
+++ b/include/asm-mips/thread_info.h
@@ -82,6 +82,8 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_MASK (THREAD_SIZE - 1UL)
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
 ({								\
diff --git a/include/asm-mn10300/thread_info.h b/include/asm-mn10300/thread_info.h
index e397e719278..78a3881f3c1 100644
--- a/include/asm-mn10300/thread_info.h
+++ b/include/asm-mn10300/thread_info.h
@@ -112,6 +112,8 @@ static inline unsigned long current_stack_pointer(void)
 	return sp;
 }
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
diff --git a/include/asm-parisc/thread_info.h b/include/asm-parisc/thread_info.h
index 2d9c7500867..9f812741c35 100644
--- a/include/asm-parisc/thread_info.h
+++ b/include/asm-parisc/thread_info.h
@@ -34,15 +34,11 @@ struct thread_info {
 
 /* thread information allocation */
 
-#define THREAD_ORDER            2
+#define THREAD_SIZE_ORDER            2
 /* Be sure to hunt all references to this down when you change the size of
  * the kernel stack */
-#define THREAD_SIZE             (PAGE_SIZE << THREAD_ORDER)
-#define THREAD_SHIFT            (PAGE_SHIFT + THREAD_ORDER)
-
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-			__get_free_pages(GFP_KERNEL, THREAD_ORDER))
-#define free_thread_info(ti)    free_pages((unsigned long) (ti), THREAD_ORDER)
+#define THREAD_SIZE             (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_SHIFT            (PAGE_SHIFT + THREAD_SIZE_ORDER)
 
 /* how to get the thread information struct from C */
 #define current_thread_info()	((struct thread_info *)mfctl(30))
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
index b705c2a7651..a9db562df69 100644
--- a/include/asm-powerpc/thread_info.h
+++ b/include/asm-powerpc/thread_info.h
@@ -66,20 +66,12 @@ struct thread_info {
 
 #if THREAD_SHIFT >= PAGE_SHIFT
 
-#define THREAD_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
-
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk)	\
-	((struct thread_info *)__get_free_pages(GFP_KERNEL | \
-		__GFP_ZERO, THREAD_ORDER))
-#else
-#define alloc_thread_info(tsk)	\
-	((struct thread_info *)__get_free_pages(GFP_KERNEL, THREAD_ORDER))
-#endif
-#define free_thread_info(ti)	free_pages((unsigned long)ti, THREAD_ORDER)
+#define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
 
 #else /* THREAD_SHIFT < PAGE_SHIFT */
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
 extern void free_thread_info(struct thread_info *ti);
 
diff --git a/include/asm-s390/thread_info.h b/include/asm-s390/thread_info.h
index 99bbed99a3b..91a8f93ad35 100644
--- a/include/asm-s390/thread_info.h
+++ b/include/asm-s390/thread_info.h
@@ -78,10 +78,7 @@ static inline struct thread_info *current_thread_info(void)
 	return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE);
 }
 
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-	__get_free_pages(GFP_KERNEL,THREAD_ORDER))
-#define free_thread_info(ti) free_pages((unsigned long) (ti),THREAD_ORDER)
+#define THREAD_SIZE_ORDER THREAD_ORDER
 
 #endif
 
diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h
index c50e5d35fe8..5131e390752 100644
--- a/include/asm-sh/thread_info.h
+++ b/include/asm-sh/thread_info.h
@@ -92,6 +92,8 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(ti)	kzalloc(THREAD_SIZE, GFP_KERNEL)
diff --git a/include/asm-sparc/thread_info_32.h b/include/asm-sparc/thread_info_32.h
index 91b9f5888c8..2cf9db04405 100644
--- a/include/asm-sparc/thread_info_32.h
+++ b/include/asm-sparc/thread_info_32.h
@@ -86,6 +86,8 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define THREAD_INFO_ORDER  1
 #endif
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
 #define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
 
diff --git a/include/asm-sparc/thread_info_64.h b/include/asm-sparc/thread_info_64.h
index c6d2e6c7f84..960969d5ad0 100644
--- a/include/asm-sparc/thread_info_64.h
+++ b/include/asm-sparc/thread_info_64.h
@@ -155,6 +155,8 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define __THREAD_INFO_ORDER	0
 #endif /* PAGE_SHIFT == 13 */
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
 ({								\
diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h
index 356b83e2c22..e07e72846c7 100644
--- a/include/asm-um/thread_info.h
+++ b/include/asm-um/thread_info.h
@@ -53,21 +53,7 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
-#ifdef CONFIG_DEBUG_STACK_USAGE
-
-#define alloc_thread_info(tsk) \
-	((struct thread_info *) __get_free_pages(GFP_KERNEL | __GFP_ZERO, \
-						 CONFIG_KERNEL_STACK_ORDER))
-#else
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) \
-	((struct thread_info *) __get_free_pages(GFP_KERNEL, \
-						 CONFIG_KERNEL_STACK_ORDER))
-#endif
-
-#define free_thread_info(ti) \
-	free_pages((unsigned long)(ti),CONFIG_KERNEL_STACK_ORDER)
+#define THREAD_SIZE_ORDER CONFIG_KERNEL_STACK_ORDER
 
 #endif
 
diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h
index 3f2de105098..da0a675adf9 100644
--- a/include/asm-x86/thread_info.h
+++ b/include/asm-x86/thread_info.h
@@ -152,6 +152,8 @@ struct thread_info {
 #define THREAD_FLAGS GFP_KERNEL
 #endif
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #define alloc_thread_info(tsk)						\
 	((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER))
 
diff --git a/include/asm-xtensa/thread_info.h b/include/asm-xtensa/thread_info.h
index a2c640682ed..7e4131dd546 100644
--- a/include/asm-xtensa/thread_info.h
+++ b/include/asm-xtensa/thread_info.h
@@ -111,10 +111,6 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
-
 #else /* !__ASSEMBLY__ */
 
 /* how to get the thread information struct from ASM */
@@ -160,6 +156,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TS_USEDFPU		0x0001	/* FPU was used by this task this quantum (SMP) */
 
 #define THREAD_SIZE 8192	//(2*PAGE_SIZE)
+#define THREAD_SIZE_ORDER 1
 
 #endif	/* __KERNEL__ */
 #endif	/* _XTENSA_THREAD_INFO */
diff --git a/kernel/fork.c b/kernel/fork.c
index 552c8d8e77a..5a5d6fef341 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -93,6 +93,23 @@ int nr_processes(void)
 static struct kmem_cache *task_struct_cachep;
 #endif
 
+#ifndef __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+static inline struct thread_info *alloc_thread_info(struct task_struct *tsk)
+{
+#ifdef CONFIG_DEBUG_STACK_USAGE
+	gfp_t mask = GFP_KERNEL | __GFP_ZERO;
+#else
+	gfp_t mask = GFP_KERNEL;
+#endif
+	return (struct thread_info *)__get_free_pages(mask, THREAD_SIZE_ORDER);
+}
+
+static inline void free_thread_info(struct thread_info *ti)
+{
+	free_pages((unsigned long)ti, THREAD_SIZE_ORDER);
+}
+#endif
+
 /* SLAB cache for signal_struct structures (tsk->signal) */
 static struct kmem_cache *signal_cachep;
 
-- 
cgit v1.2.3


From 2b4bc46052ea8cd7c370b67ca0b9c26586f1439a Mon Sep 17 00:00:00 2001
From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Date: Fri, 25 Jul 2008 01:45:42 -0700
Subject: pdflush: use time_after() instead of open-coding it

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/pdflush.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mm/pdflush.c b/mm/pdflush.c
index 9d834aa4b97..0cbe0c60c6b 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -130,7 +130,7 @@ static int __pdflush(struct pdflush_work *my_work)
 		 * Thread creation: For how long have there been zero
 		 * available threads?
 		 */
-		if (jiffies - last_empty_jifs > 1 * HZ) {
+		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
 			/* unlocked list_empty() test is OK here */
 			if (list_empty(&pdflush_list)) {
 				/* unlocked test is OK here */
@@ -151,7 +151,7 @@ static int __pdflush(struct pdflush_work *my_work)
 		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
 			continue;
 		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
-		if (jiffies - pdf->when_i_went_to_sleep > 1 * HZ) {
+		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
 			/* Limit exit rate */
 			pdf->when_i_went_to_sleep = jiffies;
 			break;					/* exeunt */
-- 
cgit v1.2.3


From ba92a43dbaee339cf5915ef766d3d3ffbaaf103c Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Fri, 25 Jul 2008 01:45:43 -0700
Subject: exec: remove some includes

fs/exec.c used to need mman.h pagemap.h swap.h and rmap.h when it did
mm-ish stuff in install_arg_page(); but no need for them after 2.6.22.

[akpm@linux-foundation.org: unbreak arm]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 190ed1f9277..e41aef0fb35 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -25,19 +25,18 @@
 #include <linux/slab.h>
 #include <linux/file.h>
 #include <linux/fdtable.h>
-#include <linux/mman.h>
+#include <linux/mm.h>
 #include <linux/stat.h>
 #include <linux/fcntl.h>
 #include <linux/smp_lock.h>
+#include <linux/swap.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/pagemap.h>
 #include <linux/highmem.h>
 #include <linux/spinlock.h>
 #include <linux/key.h>
 #include <linux/personality.h>
 #include <linux/binfmts.h>
-#include <linux/swap.h>
 #include <linux/utsname.h>
 #include <linux/pid_namespace.h>
 #include <linux/module.h>
@@ -47,7 +46,6 @@
 #include <linux/mount.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
-#include <linux/rmap.h>
 #include <linux/tsacct_kern.h>
 #include <linux/cn_proc.h>
 #include <linux/audit.h>
-- 
cgit v1.2.3


From 2d6ffcca623a9a16df6cdfbe8250b7a5904a5f5e Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Fri, 25 Jul 2008 01:45:44 -0700
Subject: inflate: refactor inflate malloc code

Inflate requires some dynamic memory allocation very early in the boot
process and this is provided with a set of four functions:
malloc/free/gzip_mark/gzip_release.

The old inflate code used a mark/release strategy rather than implement
free.  This new version instead keeps a count on the number of outstanding
allocations and when it hits zero, it resets the malloc arena.

This allows removing all the mark and release implementations and unifying
all the malloc/free implementations.

The architecture-dependent code must define two addresses:
 - free_mem_ptr, the address of the beginning of the area in which
   allocations should be made
 - free_mem_end_ptr, the address of the end of the area in which
   allocations should be made. If set to 0, then no check is made on
   the number of allocations, it just grows as much as needed

The architecture-dependent code can also provide an arch_decomp_wdog()
function call.  This function will be called several times during the
decompression process, and allow to notify the watchdog that the system is
still running.  If an architecture provides such a call, then it must
define ARCH_HAS_DECOMP_WDOG so that the generic inflate code calls
arch_decomp_wdog().

Work initially done by Matt Mackall, updated to a recent version of the
kernel and improved by me.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/boot/misc.c                    | 39 ++------------------
 arch/arm/boot/compressed/misc.c           | 59 ++++---------------------------
 arch/cris/arch-v10/boot/compressed/misc.c | 36 +------------------
 arch/cris/arch-v32/boot/compressed/misc.c | 39 ++------------------
 arch/h8300/boot/compressed/misc.c         | 38 --------------------
 arch/m32r/boot/compressed/misc.c          | 37 -------------------
 arch/mn10300/boot/compressed/misc.c       | 37 -------------------
 arch/sh/boot/compressed/misc_32.c         | 38 --------------------
 arch/sh/boot/compressed/misc_64.c         | 40 ---------------------
 arch/x86/boot/compressed/misc.c           | 39 --------------------
 init/do_mounts_rd.c                       | 25 ++-----------
 init/initramfs.c                          | 22 ++----------
 lib/inflate.c                             | 52 +++++++++++++++++++++++----
 13 files changed, 62 insertions(+), 439 deletions(-)

diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index c00646b25f6..3047a1b3a51 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -78,8 +78,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static char *input_data;
 static int  input_data_size;
@@ -88,51 +86,18 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
 static void gzip_mark(void **);
 static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
 #define HEAP_SIZE 0x3000
 
 #include "../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
  * and at least one byte is really needed.
@@ -193,7 +158,7 @@ decompress_kernel(void *output_start,
 
 	/* FIXME FIXME FIXME */
 	free_mem_ptr		= (ulg)output_start + ksize;
-	free_mem_ptr_end	= (ulg)output_start + ksize + 0x200000;
+	free_mem_end_ptr	= (ulg)output_start + ksize + 0x200000;
 	/* FIXME FIXME FIXME */
 
 	/* put in temp area to reduce initial footprint */
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 9b444022cb9..7145cc7c04f 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -217,8 +217,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern char input_data_end[];
@@ -227,64 +225,21 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void putstr(const char *);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
-#define HEAP_SIZE 0x3000
-
-#include "../../../../lib/inflate.c"
-
-#ifndef STANDALONE_DEBUG
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	arch_decomp_wdog();
-	*ptr = (void *) free_mem_ptr;
-}
+#ifdef STANDALONE_DEBUG
+#define NO_INFLATE_MALLOC
+#endif
 
-static void gzip_release(void **ptr)
-{
-	arch_decomp_wdog();
-	free_mem_ptr = (long) *ptr;
-}
-#else
-static void gzip_mark(void **ptr)
-{
-}
+#define ARCH_HAS_DECOMP_WDOG
 
-static void gzip_release(void **ptr)
-{
-}
-#endif
+#include "../../../../lib/inflate.c"
 
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
@@ -348,7 +303,7 @@ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
 {
 	output_data		= (uch *)output_start;	/* Points to kernel start */
 	free_mem_ptr		= free_mem_ptr_p;
-	free_mem_ptr_end	= free_mem_ptr_end_p;
+	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
 	arch_decomp_setup();
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
index 18e13bce140..d933c89889d 100644
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -102,50 +102,16 @@ extern char *input_data;  /* lives in head.S */
 static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
-
-static void *malloc(int size);
-static void free(void *where);
-static void gzip_mark(void **);
-static void gzip_release(void **);
-
 static void puts(const char *);
 
 /* the "heap" is put directly after the BSS ends, at end */
 
 extern int _end;
 static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
 #include "../../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* decompressor info and error messages to serial console */
 
 static void
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
index 55b2695c5d7..3595e16e82b 100644
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/arch-v32/boot/compressed/misc.c
@@ -89,20 +89,14 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
-static long bytes_out = 0;
+static long bytes_out;
 static uch *output_data;
-static unsigned long output_ptr = 0;
+static unsigned long output_ptr;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -110,37 +104,10 @@ static void puts(const char *);
 
 extern int _end;
 static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
 #include "../../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* decompressor info and error messages to serial console */
 
 static inline void
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
index 845074588af..51ab6cbd030 100644
--- a/arch/h8300/boot/compressed/misc.c
+++ b/arch/h8300/boot/compressed/misc.c
@@ -67,8 +67,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -77,11 +75,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -98,38 +92,6 @@ static unsigned long free_mem_end_ptr;
 #define TDR *((volatile unsigned char *)0xffff8b)
 #define SSR *((volatile unsigned char *)0xffff8c)
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 int puts(const char *s)
 {
 	return 0;
diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c
index 600d40e3349..d394292498c 100644
--- a/arch/m32r/boot/compressed/misc.c
+++ b/arch/m32r/boot/compressed/misc.c
@@ -70,8 +70,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static unsigned char *input_data;
 static int input_len;
@@ -82,9 +80,6 @@ static unsigned long output_ptr = 0;
 
 #include "m32r_sio.c"
 
-static void *malloc(int size);
-static void free(void *where);
-
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
@@ -92,38 +87,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void* memset(void* s, int c, size_t n)
 {
 	int i;
diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c
index ded207efc97..f673383518e 100644
--- a/arch/mn10300/boot/compressed/misc.c
+++ b/arch/mn10300/boot/compressed/misc.c
@@ -153,26 +153,9 @@ static uch *output_data;
 static unsigned long output_ptr;
 
 
-static void *malloc(int size);
-
-static inline void free(void *where)
-{	/* Don't care */
-}
-
 static unsigned long free_mem_ptr = (unsigned long) &end;
 static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
 
-static inline void gzip_mark(void **ptr)
-{
-	kputs(".");
-	*ptr = (void *) free_mem_ptr;
-}
-
-static inline void gzip_release(void **ptr)
-{
-	free_mem_ptr = (unsigned long) *ptr;
-}
-
 #define INPLACE_MOVE_ROUTINE	0x1000
 #define LOW_BUFFER_START	0x2000
 #define LOW_BUFFER_END		0x90000
@@ -186,26 +169,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (!free_mem_ptr)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
 static inline void scroll(void)
 {
 	int i;
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index adcea31e663..f386997e4d9 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -74,8 +74,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -84,11 +82,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -101,38 +95,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 #ifdef CONFIG_SH_STANDARD_BIOS
 size_t strlen(const char *s)
 {
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
index a006ef89b9d..2941657e18a 100644
--- a/arch/sh/boot/compressed/misc_64.c
+++ b/arch/sh/boot/compressed/misc_64.c
@@ -72,8 +72,6 @@ static unsigned outcnt = 0;	/* bytes in output buffer */
 static int fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -82,11 +80,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -99,40 +93,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (free_mem_ptr == 0)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
-static void free(void *where)
-{				/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void puts(const char *s)
 {
 }
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index bc5553b496f..9fea7370647 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -182,8 +182,6 @@ static unsigned		outcnt;
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 /*
  * This is set up by the setup-routine at boot-time
@@ -196,9 +194,6 @@ extern int input_len;
 
 static long bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
-
 static void *memset(void *s, int c, unsigned n);
 static void *memcpy(void *dest, const void *src, unsigned n);
 
@@ -220,40 +215,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error");
-	if (free_mem_ptr <= 0)
-		error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (memptr) *ptr;
-}
-
 static void scroll(void)
 {
 	int i;
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index 470a328d145..fedef93b586 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -303,32 +303,11 @@ static int crd_infd, crd_outfd;
 
 static int  __init fill_inbuf(void);
 static void __init flush_window(void);
-static void __init *malloc(size_t size);
-static void __init free(void *where);
 static void __init error(char *m);
-static void __init gzip_mark(void **);
-static void __init gzip_release(void **);
 
-#include "../lib/inflate.c"
-
-static void __init *malloc(size_t size)
-{
-	return kmalloc(size, GFP_KERNEL);
-}
-
-static void __init free(void *where)
-{
-	kfree(where);
-}
-
-static void __init gzip_mark(void **ptr)
-{
-}
-
-static void __init gzip_release(void **ptr)
-{
-}
+#define NO_INFLATE_MALLOC
 
+#include "../lib/inflate.c"
 
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
diff --git a/init/initramfs.c b/init/initramfs.c
index 8eeeccb328c..644fc01ad5f 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -14,16 +14,6 @@ static void __init error(char *x)
 		message = x;
 }
 
-static void __init *malloc(size_t size)
-{
-	return kmalloc(size, GFP_KERNEL);
-}
-
-static void __init free(void *where)
-{
-	kfree(where);
-}
-
 /* link hash */
 
 #define N_ALIGN(len) ((((len) + 1) & ~3) + 2)
@@ -407,18 +397,10 @@ static long bytes_out;
 
 static void __init flush_window(void);
 static void __init error(char *m);
-static void __init gzip_mark(void **);
-static void __init gzip_release(void **);
 
-#include "../lib/inflate.c"
+#define NO_INFLATE_MALLOC
 
-static void __init gzip_mark(void **ptr)
-{
-}
-
-static void __init gzip_release(void **ptr)
-{
-}
+#include "../lib/inflate.c"
 
 /* ===========================================================================
  * Write the output window window[0..outcnt-1] and update crc and bytes_out.
diff --git a/lib/inflate.c b/lib/inflate.c
index 9762294be06..1a8e8a97812 100644
--- a/lib/inflate.c
+++ b/lib/inflate.c
@@ -230,6 +230,45 @@ STATIC const ush mask_bits[] = {
 #define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}}
 #define DUMPBITS(n) {b>>=(n);k-=(n);}
 
+#ifndef NO_INFLATE_MALLOC
+/* A trivial malloc implementation, adapted from
+ *  malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ */
+
+static unsigned long malloc_ptr;
+static int malloc_count;
+
+static void *malloc(int size)
+{
+       void *p;
+
+       if (size < 0)
+		error("Malloc error");
+       if (!malloc_ptr)
+		malloc_ptr = free_mem_ptr;
+
+       malloc_ptr = (malloc_ptr + 3) & ~3;     /* Align */
+
+       p = (void *)malloc_ptr;
+       malloc_ptr += size;
+
+       if (free_mem_end_ptr && malloc_ptr >= free_mem_end_ptr)
+		error("Out of memory");
+
+       malloc_count++;
+       return p;
+}
+
+static void free(void *where)
+{
+       malloc_count--;
+       if (!malloc_count)
+		malloc_ptr = free_mem_ptr;
+}
+#else
+#define malloc(a) kmalloc(a, GFP_KERNEL)
+#define free(a) kfree(a)
+#endif
 
 /*
    Huffman code decoding is performed using a multi-level table lookup.
@@ -1045,7 +1084,6 @@ STATIC int INIT inflate(void)
   int e;                /* last block flag */
   int r;                /* result code */
   unsigned h;           /* maximum struct huft's malloc'ed */
-  void *ptr;
 
   /* initialize window, bit buffer */
   wp = 0;
@@ -1057,12 +1095,12 @@ STATIC int INIT inflate(void)
   h = 0;
   do {
     hufts = 0;
-    gzip_mark(&ptr);
-    if ((r = inflate_block(&e)) != 0) {
-      gzip_release(&ptr);	    
-      return r;
-    }
-    gzip_release(&ptr);
+#ifdef ARCH_HAS_DECOMP_WDOG
+    arch_decomp_wdog();
+#endif
+    r = inflate_block(&e);
+    if (r)
+	    return r;
     if (hufts > h)
       h = hufts;
   } while (!e);
-- 
cgit v1.2.3


From 2f5a5cf93fae7b8354b45b8443dcc3448a8fc276 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Fri, 25 Jul 2008 01:45:46 -0700
Subject: drivers/power: fix platform driver hotplug/coldplug

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf ("platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".
Add MODULE_ALIAS() to the hotpluggable "power" drivers drivers, to
re-enable auto loading.

[dbrownell@users.sourceforge.net: one was missing]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/power/ds2760_battery.c | 2 ++
 drivers/power/pda_power.c      | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 71be36f1870..308ddb201b6 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -433,6 +433,8 @@ static int ds2760_battery_resume(struct platform_device *pdev)
 
 #endif /* CONFIG_PM */
 
+MODULE_ALIAS("platform:ds2760-battery");
+
 static struct platform_driver ds2760_battery_driver = {
 	.driver = {
 		.name = "ds2760-battery",
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index 82810b7bff9..0471ec743ab 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -362,6 +362,8 @@ static int pda_power_resume(struct platform_device *pdev)
 #define pda_power_resume NULL
 #endif /* CONFIG_PM */
 
+MODULE_ALIAS("platform:pda-power");
+
 static struct platform_driver pda_power_pdrv = {
 	.driver = {
 		.name = "pda-power",
-- 
cgit v1.2.3


From 4f46d6e7e5ffbce0ee1d1a80767fdf45e56cc863 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Fri, 25 Jul 2008 01:45:47 -0700
Subject: mfd: fix platform driver hotplug/coldplug

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".
Add MODULE_ALIAS() to the MFD platform drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net: one was missing]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/htc-pasic3.c | 2 ++
 drivers/mfd/mcp-sa11x0.c | 2 ++
 drivers/mfd/sm501.c      | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index 633cbba072f..91b294dcc13 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -238,6 +238,8 @@ static int pasic3_remove(struct platform_device *pdev)
 	return 0;
 }
 
+MODULE_ALIAS("platform:pasic3");
+
 static struct platform_driver pasic3_driver = {
 	.driver		= {
 		.name	= "pasic3",
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 1eab7cffcea..b5272b5ce3f 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -242,6 +242,8 @@ static int mcp_sa11x0_resume(struct platform_device *dev)
 /*
  * The driver for the SA11x0 MCP port.
  */
+MODULE_ALIAS("platform:sa11x0-mcp");
+
 static struct platform_driver mcp_sa11x0_driver = {
 	.probe		= mcp_sa11x0_probe,
 	.remove		= mcp_sa11x0_remove,
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 2fe64734d8a..e2530df4d85 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1378,6 +1378,8 @@ static struct pci_driver sm501_pci_drv = {
 	.remove		= sm501_pci_remove,
 };
 
+MODULE_ALIAS("platform:sm501");
+
 static struct platform_driver sm501_plat_drv = {
 	.driver		= {
 		.name	= "sm501",
-- 
cgit v1.2.3


From db358b40e0674fd4079204d8e3e1c8ab3829a1b9 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Fri, 25 Jul 2008 01:45:48 -0700
Subject: parport: fix platform driver hotplug/coldplug

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".
Add MODULE_ALIAS() to the hotpluggable parport platform drivers, to
re-enable auto loading.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/parport/parport_ax88796.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/parport/parport_ax88796.c b/drivers/parport/parport_ax88796.c
index 4ec220b2eae..6938d2e9f18 100644
--- a/drivers/parport/parport_ax88796.c
+++ b/drivers/parport/parport_ax88796.c
@@ -406,6 +406,8 @@ static int parport_ax88796_resume(struct platform_device *dev)
 #define parport_ax88796_resume  NULL
 #endif
 
+MODULE_ALIAS("platform:ax88796-pp");
+
 static struct platform_driver axdrv = {
 	.driver		= {
 		.name	= "ax88796-pp",
-- 
cgit v1.2.3


From 4500d067eeb3d00679335d9cf5c6536e79cd3ef4 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Fri, 25 Jul 2008 01:45:49 -0700
Subject: init.h: remove obsolete content

Remove apparently obsolete content from init.h referring to gcc 2.9x
and to "no_module_init".

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/init.h | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/include/linux/init.h b/include/linux/init.h
index 21d658cdfa2..42ae95411a9 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -275,13 +275,7 @@ void __init parse_early_param(void);
 
 #define security_initcall(fn)		module_init(fn)
 
-/* These macros create a dummy inline: gcc 2.9x does not count alias
- as usage, hence the `unused function' warning when __init functions
- are declared static. We use the dummy __*_module_inline functions
- both to kill the warning and check the type of the init/cleanup
- function. */
-
-/* Each module must use one module_init(), or one no_module_init */
+/* Each module must use one module_init(). */
 #define module_init(initfn)					\
 	static inline initcall_t __inittest(void)		\
 	{ return initfn; }					\
-- 
cgit v1.2.3


From 277e2c695907a70b316a31769cd891dc4d43b7f3 Mon Sep 17 00:00:00 2001
From: Daniel Guilak <guilak@linux.vnet.ibm.com>
Date: Fri, 25 Jul 2008 01:45:49 -0700
Subject: init/version.c: silence sparse warning by declaring the version
 string

Signed-off-by: Daniel Guilak <daniel@danielguilak.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/version.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/init/version.c b/init/version.c
index 9d17d70ee02..041fd822ce2 100644
--- a/init/version.c
+++ b/init/version.c
@@ -16,6 +16,7 @@
 #define version(a) Version_ ## a
 #define version_string(a) version(a)
 
+extern int version_string(LINUX_VERSION_CODE);
 int version_string(LINUX_VERSION_CODE);
 
 struct uts_namespace init_uts_ns = {
-- 
cgit v1.2.3


From 197dcffc8ba0ea943fee86e28e99cd9575799772 Mon Sep 17 00:00:00 2001
From: Daniel Guilak <guilak@linux.vnet.ibm.com>
Date: Fri, 25 Jul 2008 01:45:50 -0700
Subject: init/version.c: define version_string only if CONFIG_KALLSYMS is not
 defined

int Version_* is only used with ksymoops, which is only needed (according
to README and Documentation/Changes) if CONFIG_KALLSYMS is NOT defined.
Therefore this patch defines version_string only if CONFIG_KALLSYMS is not
defined.

Signed-off-by: Daniel Guilak <daniel@danielguilak.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/version.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/init/version.c b/init/version.c
index 041fd822ce2..52a8b98642b 100644
--- a/init/version.c
+++ b/init/version.c
@@ -13,11 +13,13 @@
 #include <linux/utsrelease.h>
 #include <linux/version.h>
 
+#ifndef CONFIG_KALLSYMS
 #define version(a) Version_ ## a
 #define version_string(a) version(a)
 
 extern int version_string(LINUX_VERSION_CODE);
 int version_string(LINUX_VERSION_CODE);
+#endif
 
 struct uts_namespace init_uts_ns = {
 	.kref = {
-- 
cgit v1.2.3


From a7f371e54fac49ff62bb640d4a7276fca01527e8 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 01:45:51 -0700
Subject: documentation: update CodingStyle tips for Emacs users

Describe a setup that integrates better with Emacs' cc-mode and also fixes
up the alignment of continuation lines to really only use tabs.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/CodingStyle | 42 +++++++++++++++++++++++-------------------
 1 file changed, 23 insertions(+), 19 deletions(-)

diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 6caa1461557..1875e502f87 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -474,25 +474,29 @@ make a good program).
 So, you can either get rid of GNU emacs, or change it to use saner
 values.  To do the latter, you can stick the following in your .emacs file:
 
-(defun linux-c-mode ()
-  "C mode with adjusted defaults for use with the Linux kernel."
-  (interactive)
-  (c-mode)
-  (c-set-style "K&R")
-  (setq tab-width 8)
-  (setq indent-tabs-mode t)
-  (setq c-basic-offset 8))
-
-This will define the M-x linux-c-mode command.  When hacking on a
-module, if you put the string -*- linux-c -*- somewhere on the first
-two lines, this mode will be automatically invoked. Also, you may want
-to add
-
-(setq auto-mode-alist (cons '("/usr/src/linux.*/.*\\.[ch]$" . linux-c-mode)
-			auto-mode-alist))
-
-to your .emacs file if you want to have linux-c-mode switched on
-automagically when you edit source files under /usr/src/linux.
+(defun c-lineup-arglist-tabs-only (ignored)
+  "Line up argument lists by tabs, not spaces"
+  (let* ((anchor (c-langelem-pos c-syntactic-element))
+	 (column (c-langelem-2nd-pos c-syntactic-element))
+	 (offset (- (1+ column) anchor))
+	 (steps (floor offset c-basic-offset)))
+    (* (max steps 1)
+       c-basic-offset)))
+
+(add-hook 'c-mode-hook
+          (lambda ()
+            (let ((filename (buffer-file-name)))
+              ;; Enable kernel mode for the appropriate files
+              (when (and filename
+                         (string-match "~/src/linux-trees" filename))
+                (setq indent-tabs-mode t)
+                (c-set-style "linux")
+                (c-set-offset 'arglist-cont-nonempty
+                              '(c-lineup-gcc-asm-reg
+                                c-lineup-arglist-tabs-only))))))
+
+This will make emacs go better with the kernel coding style for C
+files below ~/src/linux-trees.
 
 But even if you fail in getting emacs to do sane formatting, not
 everything is lost: use "indent".
-- 
cgit v1.2.3


From f38954c93c4a548f55d73ac5c1cf5e7f4023bb6c Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Fri, 25 Jul 2008 01:45:52 -0700
Subject: drivers/misc/hpilo.c needs CONFIG_PCI

m68k allmodconfig:

drivers/misc/hpilo.c: In function 'ilo_ccb_close':
drivers/misc/hpilo.c:225: error: implicit declaration of function 'pci_free_consistent'
drivers/misc/hpilo.c: In function 'ilo_ccb_open':
drivers/misc/hpilo.c:244: error: implicit declaration of function 'pci_alloc_consistent'
drivers/misc/hpilo.c:245: warning: assignment makes pointer from integer without a cast

Cc: David Altobelli <david.altobelli@hp.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 1689c051f68..7e37ba5afe3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -436,6 +436,7 @@ config SGI_XP
 
 config HP_ILO
 	tristate "Channel interface driver for HP iLO/iLO2 processor"
+	depends on PCI
 	default n
 	help
 	  The channel interface driver allows applications to communicate
-- 
cgit v1.2.3


From b6c63937001889af6fe431aaba97e59d04e028e7 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 01:45:52 -0700
Subject: Rename WARN() to WARNING() to clear the namespace

We want to use WARN() as a variant of WARN_ON(), however a few drivers are
using WARN() internally.  This patch renames these to WARNING() to avoid the
namespace clash.  A few cases were defining but not using the thing, for those
cases I just deleted the definition.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Greg KH <greg@kroah.com>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/isdn/hisax/st5481.h       |  4 ++--
 drivers/isdn/hisax/st5481_b.c     |  4 ++--
 drivers/isdn/hisax/st5481_d.c     |  6 +++---
 drivers/isdn/hisax/st5481_usb.c   | 18 +++++++++---------
 drivers/usb/gadget/at91_udc.h     |  2 +-
 drivers/usb/gadget/cdc2.c         |  2 +-
 drivers/usb/gadget/ether.c        |  2 +-
 drivers/usb/gadget/file_storage.c | 14 +++++++-------
 drivers/usb/gadget/fsl_usb2_udc.c |  2 +-
 drivers/usb/gadget/fsl_usb2_udc.h |  2 +-
 drivers/usb/gadget/gmidi.c        |  2 --
 drivers/usb/gadget/goku_udc.c     |  2 +-
 drivers/usb/gadget/goku_udc.h     |  2 +-
 drivers/usb/gadget/inode.c        |  2 --
 drivers/usb/gadget/net2280.c      |  2 +-
 drivers/usb/gadget/net2280.h      |  2 +-
 drivers/usb/gadget/omap_udc.c     |  6 +++---
 drivers/usb/gadget/omap_udc.h     |  2 +-
 drivers/usb/gadget/printer.c      |  2 +-
 drivers/usb/gadget/pxa25x_udc.c   |  6 +++---
 drivers/usb/gadget/pxa25x_udc.h   |  2 +-
 drivers/usb/gadget/u_ether.c      |  3 ---
 drivers/usb/host/isp116x-hcd.c    |  2 +-
 drivers/usb/host/isp116x.h        |  2 +-
 drivers/usb/host/sl811-hcd.c      |  2 +-
 drivers/usb/host/sl811.h          |  2 +-
 drivers/usb/misc/usbtest.c        |  4 ++--
 include/linux/usb/composite.h     |  2 +-
 28 files changed, 48 insertions(+), 55 deletions(-)

diff --git a/drivers/isdn/hisax/st5481.h b/drivers/isdn/hisax/st5481.h
index 2044e7173ab..cff7a635433 100644
--- a/drivers/isdn/hisax/st5481.h
+++ b/drivers/isdn/hisax/st5481.h
@@ -220,7 +220,7 @@ enum {
 #define ERR(format, arg...) \
 printk(KERN_ERR "%s:%s: " format "\n" , __FILE__,  __func__ , ## arg)
 
-#define WARN(format, arg...) \
+#define WARNING(format, arg...) \
 printk(KERN_WARNING "%s:%s: " format "\n" , __FILE__,  __func__ , ## arg)
 
 #define INFO(format, arg...) \
@@ -412,7 +412,7 @@ struct st5481_adapter {
 ({ \
 	int status; \
 	if ((status = usb_submit_urb(urb, mem_flags)) < 0) { \
-		WARN("usb_submit_urb failed,status=%d", status); \
+		WARNING("usb_submit_urb failed,status=%d", status); \
 	} \
         status; \
 })
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index fa64115cd7c..0074b600a0e 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -180,7 +180,7 @@ static void usb_b_out_complete(struct urb *urb)
 				DBG(4,"urb killed status %d", urb->status);
 				return; // Give up
 			default: 
-				WARN("urb status %d",urb->status);
+				WARNING("urb status %d",urb->status);
 				if (b_out->busy == 0) {
 					st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2 | USB_DIR_OUT, NULL, NULL);
 				}
@@ -372,6 +372,6 @@ void st5481_b_l2l1(struct hisax_if *ifc, int pr, void *arg)
 		B_L1L2(bcs, PH_DEACTIVATE | INDICATION, NULL);
 		break;
 	default:
-		WARN("pr %#x\n", pr);
+		WARNING("pr %#x\n", pr);
 	}
 }
diff --git a/drivers/isdn/hisax/st5481_d.c b/drivers/isdn/hisax/st5481_d.c
index b8c4855cc88..077991c1cd0 100644
--- a/drivers/isdn/hisax/st5481_d.c
+++ b/drivers/isdn/hisax/st5481_d.c
@@ -389,7 +389,7 @@ static void usb_d_out_complete(struct urb *urb)
 				DBG(1,"urb killed status %d", urb->status);
 				break;
 			default: 
-				WARN("urb status %d",urb->status);
+				WARNING("urb status %d",urb->status);
 				if (d_out->busy == 0) {
 					st5481_usb_pipe_reset(adapter, EP_D_OUT | USB_DIR_OUT, fifo_reseted, adapter);
 				}
@@ -420,7 +420,7 @@ static void dout_start_xmit(struct FsmInst *fsm, int event, void *arg)
 	isdnhdlc_out_init(&d_out->hdlc_state, 1, 0);
 
 	if (test_and_set_bit(buf_nr, &d_out->busy)) {
-		WARN("ep %d urb %d busy %#lx", EP_D_OUT, buf_nr, d_out->busy);
+		WARNING("ep %d urb %d busy %#lx", EP_D_OUT, buf_nr, d_out->busy);
 		return;
 	}
 	urb = d_out->urb[buf_nr];
@@ -601,7 +601,7 @@ void st5481_d_l2l1(struct hisax_if *hisax_d_if, int pr, void *arg)
 		FsmEvent(&adapter->d_out.fsm, EV_DOUT_START_XMIT, NULL);
 		break;
 	default:
-		WARN("pr %#x\n", pr);
+		WARNING("pr %#x\n", pr);
 		break;
 	}
 }
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index 427a8b0520f..ec3c0e50766 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -66,7 +66,7 @@ static void usb_ctrl_msg(struct st5481_adapter *adapter,
 	struct ctrl_msg *ctrl_msg;
 	
 	if ((w_index = fifo_add(&ctrl->msg_fifo.f)) < 0) {
-		WARN("control msg FIFO full");
+		WARNING("control msg FIFO full");
 		return;
 	}
 	ctrl_msg = &ctrl->msg_fifo.data[w_index]; 
@@ -139,7 +139,7 @@ static void usb_ctrl_complete(struct urb *urb)
 				DBG(1,"urb killed status %d", urb->status);
 				return; // Give up
 			default: 
-				WARN("urb status %d",urb->status);
+				WARNING("urb status %d",urb->status);
 				break;
 		}
 	}
@@ -198,7 +198,7 @@ static void usb_int_complete(struct urb *urb)
 			DBG(2, "urb shutting down with status: %d", urb->status);
 			return;
 		default:
-			WARN("nonzero urb status received: %d", urb->status);
+			WARNING("nonzero urb status received: %d", urb->status);
 			goto exit;
 	}
 
@@ -235,7 +235,7 @@ static void usb_int_complete(struct urb *urb)
 exit:
 	status = usb_submit_urb (urb, GFP_ATOMIC);
 	if (status)
-		WARN("usb_submit_urb failed with result %d", status);
+		WARNING("usb_submit_urb failed with result %d", status);
 }
 
 /* ======================================================================
@@ -257,7 +257,7 @@ int st5481_setup_usb(struct st5481_adapter *adapter)
 	DBG(2,"");
 	
 	if ((status = usb_reset_configuration (dev)) < 0) {
-		WARN("reset_configuration failed,status=%d",status);
+		WARNING("reset_configuration failed,status=%d",status);
 		return status;
 	}
 
@@ -269,7 +269,7 @@ int st5481_setup_usb(struct st5481_adapter *adapter)
 
 	// Check if the config is sane
 	if ( altsetting->desc.bNumEndpoints != 7 ) {
-		WARN("expecting 7 got %d endpoints!", altsetting->desc.bNumEndpoints);
+		WARNING("expecting 7 got %d endpoints!", altsetting->desc.bNumEndpoints);
 		return -EINVAL;
 	}
 
@@ -279,7 +279,7 @@ int st5481_setup_usb(struct st5481_adapter *adapter)
 
 	// Use alternative setting 3 on interface 0 to have 2B+D
 	if ((status = usb_set_interface (dev, 0, 3)) < 0) {
-		WARN("usb_set_interface failed,status=%d",status);
+		WARNING("usb_set_interface failed,status=%d",status);
 		return status;
 	}
 
@@ -497,7 +497,7 @@ static void usb_in_complete(struct urb *urb)
 				DBG(1,"urb killed status %d", urb->status);
 				return; // Give up
 			default: 
-				WARN("urb status %d",urb->status);
+				WARNING("urb status %d",urb->status);
 				break;
 		}
 	}
@@ -523,7 +523,7 @@ static void usb_in_complete(struct urb *urb)
 			DBG(4,"count=%d",status);
 			DBG_PACKET(0x400, in->rcvbuf, status);
 			if (!(skb = dev_alloc_skb(status))) {
-				WARN("receive out of memory\n");
+				WARNING("receive out of memory\n");
 				break;
 			}
 			memcpy(skb_put(skb, status), in->rcvbuf, status);
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index a973f2a50fb..c65d6229589 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -171,7 +171,7 @@ struct at91_request {
 #endif
 
 #define ERR(stuff...)		pr_err("udc: " stuff)
-#define WARN(stuff...)		pr_warning("udc: " stuff)
+#define WARNING(stuff...)	pr_warning("udc: " stuff)
 #define INFO(stuff...)		pr_info("udc: " stuff)
 #define DBG(stuff...)		pr_debug("udc: " stuff)
 
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index d490d028950..a39a4b940c3 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -170,7 +170,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 		 * but if the controller isn't recognized at all then
 		 * that assumption is a bit more likely to be wrong.
 		 */
-		WARN(cdev, "controller '%s' not recognized; trying %s\n",
+		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
 				gadget->name,
 				cdc_config_driver.label);
 		device_desc.bcdDevice =
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d7aaaa29b1e..bcac2e68660 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -293,7 +293,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 		 * but if the controller isn't recognized at all then
 		 * that assumption is a bit more likely to be wrong.
 		 */
-		WARN(cdev, "controller '%s' not recognized; trying %s\n",
+		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
 				gadget->name,
 				eth_config_driver.label);
 		device_desc.bcdDevice =
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 15c24edbb61..ea2c31d1808 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -308,7 +308,7 @@ MODULE_LICENSE("Dual BSD/GPL");
 	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
 #define ERROR(d, fmt, args...) \
 	dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
+#define WARNING(d, fmt, args...) \
 	dev_warn(&(d)->gadget->dev , fmt , ## args)
 #define INFO(d, fmt, args...) \
 	dev_info(&(d)->gadget->dev , fmt , ## args)
@@ -1091,7 +1091,7 @@ static int ep0_queue(struct fsg_dev *fsg)
 	if (rc != 0 && rc != -ESHUTDOWN) {
 
 		/* We can't do much more than wait for a reset */
-		WARN(fsg, "error in submission: %s --> %d\n",
+		WARNING(fsg, "error in submission: %s --> %d\n",
 				fsg->ep0->name, rc);
 	}
 	return rc;
@@ -1227,7 +1227,7 @@ static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 
 	/* Save the command for later */
 	if (fsg->cbbuf_cmnd_size)
-		WARN(fsg, "CB[I] overwriting previous command\n");
+		WARNING(fsg, "CB[I] overwriting previous command\n");
 	fsg->cbbuf_cmnd_size = req->actual;
 	memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
 
@@ -1506,7 +1506,7 @@ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
 		 * submissions if DMA is enabled. */
 		if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
 						req->length == 0))
-			WARN(fsg, "error in submission: %s --> %d\n",
+			WARNING(fsg, "error in submission: %s --> %d\n",
 					ep->name, rc);
 	}
 }
@@ -2294,7 +2294,7 @@ static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
 		VDBG(fsg, "delayed bulk-in endpoint halt\n");
 	while (rc != 0) {
 		if (rc != -EAGAIN) {
-			WARN(fsg, "usb_ep_set_halt -> %d\n", rc);
+			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
 			rc = 0;
 			break;
 		}
@@ -2317,7 +2317,7 @@ static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
 		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
 	while (rc != 0) {
 		if (rc != -EAGAIN) {
-			WARN(fsg, "usb_ep_set_wedge -> %d\n", rc);
+			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
 			rc = 0;
 			break;
 		}
@@ -3755,7 +3755,7 @@ static int __init check_parameters(struct fsg_dev *fsg)
 		if (gcnum >= 0)
 			mod_data.release = 0x0300 + gcnum;
 		else {
-			WARN(fsg, "controller '%s' not recognized\n",
+			WARNING(fsg, "controller '%s' not recognized\n",
 				fsg->gadget->name);
 			mod_data.release = 0x0399;
 		}
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 1695382f30f..1cfccf102a2 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1538,7 +1538,7 @@ static void dtd_complete_irq(struct fsl_udc *udc)
 
 		/* If the ep is configured */
 		if (curr_ep->name == NULL) {
-			WARN("Invalid EP?");
+			WARNING("Invalid EP?");
 			continue;
 		}
 
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 98b1483ef6a..6131752a38b 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -552,7 +552,7 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
 #endif
 
 #define ERR(stuff...)		pr_err("udc: " stuff)
-#define WARN(stuff...)		pr_warning("udc: " stuff)
+#define WARNING(stuff...)		pr_warning("udc: " stuff)
 #define INFO(stuff...)		pr_info("udc: " stuff)
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 7f4d4828e3a..ea8651e3da1 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -138,8 +138,6 @@ static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req);
 	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
 #define ERROR(d, fmt, args...) \
 	dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
-	dev_warn(&(d)->gadget->dev , fmt , ## args)
 #define INFO(d, fmt, args...) \
 	dev_info(&(d)->gadget->dev , fmt , ## args)
 
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 48f1c63b701..60aa04847b1 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1768,7 +1768,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * usb_gadget_driver_{register,unregister}() must change.
 	 */
 	if (the_controller) {
-		WARN(dev, "ignoring %s\n", pci_name(pdev));
+		WARNING(dev, "ignoring %s\n", pci_name(pdev));
 		return -EBUSY;
 	}
 	if (!pdev->irq) {
diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
index bc4eb1e0b50..566cb231905 100644
--- a/drivers/usb/gadget/goku_udc.h
+++ b/drivers/usb/gadget/goku_udc.h
@@ -285,7 +285,7 @@ struct goku_udc {
 
 #define ERROR(dev,fmt,args...) \
 	xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
+#define WARNING(dev,fmt,args...) \
 	xprintk(dev , KERN_WARNING , fmt , ## args)
 #define INFO(dev,fmt,args...) \
 	xprintk(dev , KERN_INFO , fmt , ## args)
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 04692d59fc1..f4585d3e90d 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -262,8 +262,6 @@ static const char *CHIP;
 
 #define ERROR(dev,fmt,args...) \
 	xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
-	xprintk(dev , KERN_WARNING , fmt , ## args)
 #define INFO(dev,fmt,args...) \
 	xprintk(dev , KERN_INFO , fmt , ## args)
 
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index b67ab677af7..5cfb5ebf388 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1007,7 +1007,7 @@ static void scan_dma_completions (struct net2280_ep *ep)
 			 * 0122, and 0124; not all cases trigger the warning.
 			 */
 			if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) {
-				WARN (ep->dev, "%s lost packet sync!\n",
+				WARNING (ep->dev, "%s lost packet sync!\n",
 						ep->ep.name);
 				req->req.status = -EOVERFLOW;
 			} else if ((tmp = readl (&ep->regs->ep_avail)) != 0) {
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index 1f2af398a9a..81a71dbdc2c 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -272,7 +272,7 @@ static inline void net2280_led_shutdown (struct net2280 *dev)
 
 #define ERROR(dev,fmt,args...) \
 	xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
+#define WARNING(dev,fmt,args...) \
 	xprintk(dev , KERN_WARNING , fmt , ## args)
 #define INFO(dev,fmt,args...) \
 	xprintk(dev , KERN_INFO , fmt , ## args)
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 4b79a8509e8..395bd184448 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1120,7 +1120,7 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value)
 			status = -EINVAL;
 		else if (value) {
 			if (ep->udc->ep0_set_config) {
-				WARN("error changing config?\n");
+				WARNING("error changing config?\n");
 				omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
 			}
 			omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
@@ -1764,7 +1764,7 @@ do_stall:
 					u.r.bRequestType, u.r.bRequest, status);
 			if (udc->ep0_set_config) {
 				if (udc->ep0_reset_config)
-					WARN("error resetting config?\n");
+					WARNING("error resetting config?\n");
 				else
 					omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
 			}
@@ -3076,7 +3076,7 @@ static int omap_udc_suspend(struct platform_device *dev, pm_message_t message)
 	 * which would prevent entry to deep sleep...
 	 */
 	if ((devstat & UDC_ATT) != 0 && (devstat & UDC_SUS) == 0) {
-		WARN("session active; suspend requires disconnect\n");
+		WARNING("session active; suspend requires disconnect\n");
 		omap_pullup(&udc->gadget, 0);
 	}
 
diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h
index 8522bbb1227..29edc51b6b2 100644
--- a/drivers/usb/gadget/omap_udc.h
+++ b/drivers/usb/gadget/omap_udc.h
@@ -188,7 +188,7 @@ struct omap_udc {
 #endif
 
 #define ERR(stuff...)		pr_err("udc: " stuff)
-#define WARN(stuff...)		pr_warning("udc: " stuff)
+#define WARNING(stuff...)	pr_warning("udc: " stuff)
 #define INFO(stuff...)		pr_info("udc: " stuff)
 #define DBG(stuff...)		pr_debug("udc: " stuff)
 
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 49cd9e145a9..e0090085b78 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -179,7 +179,7 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
 
 #define ERROR(dev, fmt, args...) \
 	xprintk(dev, KERN_ERR, fmt, ## args)
-#define WARN(dev, fmt, args...) \
+#define WARNING(dev, fmt, args...) \
 	xprintk(dev, KERN_WARNING, fmt, ## args)
 #define INFO(dev, fmt, args...) \
 	xprintk(dev, KERN_INFO, fmt, ## args)
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 8fb0066609b..7e6725d8997 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -342,7 +342,7 @@ pxa25x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
 	struct pxa25x_request	*req;
 
 	req = container_of (_req, struct pxa25x_request, req);
-	WARN_ON (!list_empty (&req->queue));
+	WARN_ON(!list_empty (&req->queue));
 	kfree(req);
 }
 
@@ -1556,7 +1556,7 @@ config_change:
 					 * tell us about config change events,
 					 * so later ones may fail...
 					 */
-					WARN("config change %02x fail %d?\n",
+					WARNING("config change %02x fail %d?\n",
 						u.r.bRequest, i);
 					return;
 					/* TODO experiment:  if has_cfr,
@@ -2330,7 +2330,7 @@ static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
 	unsigned long flags;
 
 	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
-		WARN("USB host won't detect disconnect!\n");
+		WARNING("USB host won't detect disconnect!\n");
 	udc->suspended = 1;
 
 	local_irq_save(flags);
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index 4d11ece7c95..c8a13215e02 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -259,7 +259,7 @@ dump_state(struct pxa25x_udc *dev)
 #define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
 
 #define ERR(stuff...)		pr_err("udc: " stuff)
-#define WARN(stuff...)		pr_warning("udc: " stuff)
+#define WARNING(stuff...)	pr_warning("udc: " stuff)
 #define INFO(stuff...)		pr_info("udc: " stuff)
 
 
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 5458f43a866..3791e627190 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -116,7 +116,6 @@ static inline int qlen(struct usb_gadget *gadget)
 #undef DBG
 #undef VDBG
 #undef ERROR
-#undef WARN
 #undef INFO
 
 #define xprintk(d, level, fmt, args...) \
@@ -140,8 +139,6 @@ static inline int qlen(struct usb_gadget *gadget)
 
 #define ERROR(dev, fmt, args...) \
 	xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev, fmt, args...) \
-	xprintk(dev , KERN_WARNING , fmt , ## args)
 #define INFO(dev, fmt, args...) \
 	xprintk(dev , KERN_INFO , fmt , ## args)
 
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 31178e10cbb..ce1ca0ba051 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -882,7 +882,7 @@ static void isp116x_endpoint_disable(struct usb_hcd *hcd,
 	for (i = 0; i < 100 && !list_empty(&hep->urb_list); i++)
 		msleep(3);
 	if (!list_empty(&hep->urb_list))
-		WARN("ep %p not empty?\n", ep);
+		WARNING("ep %p not empty?\n", ep);
 
 	kfree(ep);
 	hep->hcpriv = NULL;
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index 595b90a9984..aa211bafcff 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -338,7 +338,7 @@ struct isp116x_ep {
 #endif
 
 #define ERR(stuff...)		printk(KERN_ERR "116x: " stuff)
-#define WARN(stuff...)		printk(KERN_WARNING "116x: " stuff)
+#define WARNING(stuff...)	printk(KERN_WARNING "116x: " stuff)
 #define INFO(stuff...)		printk(KERN_INFO "116x: " stuff)
 
 /* ------------------------------------------------- */
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 340d72da554..8a74bbb57d0 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1026,7 +1026,7 @@ sl811h_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
 	if (!list_empty(&hep->urb_list))
 		msleep(3);
 	if (!list_empty(&hep->urb_list))
-		WARN("ep %p not empty?\n", ep);
+		WARNING("ep %p not empty?\n", ep);
 
 	kfree(ep);
 	hep->hcpriv = NULL;
diff --git a/drivers/usb/host/sl811.h b/drivers/usb/host/sl811.h
index 7690d98e42a..b6b8c1f233d 100644
--- a/drivers/usb/host/sl811.h
+++ b/drivers/usb/host/sl811.h
@@ -261,6 +261,6 @@ sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count)
 #endif
 
 #define ERR(stuff...)		printk(KERN_ERR "sl811: " stuff)
-#define WARN(stuff...)		printk(KERN_WARNING "sl811: " stuff)
+#define WARNING(stuff...)	printk(KERN_WARNING "sl811: " stuff)
 #define INFO(stuff...)		printk(KERN_INFO "sl811: " stuff)
 
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 054dedd2812..b358c4e1cf2 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -81,7 +81,7 @@ static struct usb_device *testdev_to_usbdev (struct usbtest_dev *test)
 
 #define ERROR(tdev, fmt, args...) \
 	dev_err(&(tdev)->intf->dev , fmt , ## args)
-#define WARN(tdev, fmt, args...) \
+#define WARNING(tdev, fmt, args...) \
 	dev_warn(&(tdev)->intf->dev , fmt , ## args)
 
 /*-------------------------------------------------------------------------*/
@@ -1946,7 +1946,7 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
 
 			status = get_endpoints (dev, intf);
 			if (status < 0) {
-				WARN(dev, "couldn't get endpoints, %d\n",
+				WARNING(dev, "couldn't get endpoints, %d\n",
 						status);
 				return status;
 			}
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 747c3a49cdc..c932390c6da 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -330,7 +330,7 @@ extern int usb_string_id(struct usb_composite_dev *c);
 	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
 #define ERROR(d, fmt, args...) \
 	dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
+#define WARNING(d, fmt, args...) \
 	dev_warn(&(d)->gadget->dev , fmt , ## args)
 #define INFO(d, fmt, args...) \
 	dev_info(&(d)->gadget->dev , fmt , ## args)
-- 
cgit v1.2.3


From a8f18b909c0a3f22630846207035c8b84bb252b8 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 01:45:53 -0700
Subject: Add a WARN() macro; this is WARN_ON() + printk arguments

Add a WARN() macro that acts like WARN_ON(), with the added feature that it
takes a printk like argument that is printed as part of the warning message.

[akpm@linux-foundation.org: fix printk arguments]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/bug.h | 22 ++++++++++++++++++++++
 kernel/panic.c            | 22 ++++++++++++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index 2632328d864..a346e744e77 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -34,9 +34,14 @@ struct bug_entry {
 #ifndef __WARN
 #ifndef __ASSEMBLY__
 extern void warn_on_slowpath(const char *file, const int line);
+extern void warn_slowpath(const char *file, const int line,
+		const char *fmt, ...) __attribute__((format(printf, 3, 4)));
 #define WANT_WARN_ON_SLOWPATH
 #endif
 #define __WARN() warn_on_slowpath(__FILE__, __LINE__)
+#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg)
+#else
+#define __WARN_printf(arg...) __WARN()
 #endif
 
 #ifndef WARN_ON
@@ -48,6 +53,15 @@ extern void warn_on_slowpath(const char *file, const int line);
 })
 #endif
 
+#ifndef WARN
+#define WARN(condition, format...) ({						\
+	int __ret_warn_on = !!(condition);				\
+	if (unlikely(__ret_warn_on))					\
+		__WARN_printf(format);					\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
 #else /* !CONFIG_BUG */
 #ifndef HAVE_ARCH_BUG
 #define BUG()
@@ -63,6 +77,14 @@ extern void warn_on_slowpath(const char *file, const int line);
 	unlikely(__ret_warn_on);					\
 })
 #endif
+
+#ifndef WARN
+#define WARN(condition, format...) ({					\
+	int __ret_warn_on = !!(condition);				\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
 #endif
 
 #define WARN_ON_ONCE(condition)	({				\
diff --git a/kernel/panic.c b/kernel/panic.c
index 425567f45b9..12c5a0a6c89 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -318,6 +318,28 @@ void warn_on_slowpath(const char *file, int line)
 	add_taint(TAINT_WARN);
 }
 EXPORT_SYMBOL(warn_on_slowpath);
+
+
+void warn_slowpath(const char *file, int line, const char *fmt, ...)
+{
+	va_list args;
+	char function[KSYM_SYMBOL_LEN];
+	unsigned long caller = (unsigned long)__builtin_return_address(0);
+	sprint_symbol(function, caller);
+
+	printk(KERN_WARNING "------------[ cut here ]------------\n");
+	printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file,
+		line, function);
+	va_start(args, fmt);
+	vprintk(fmt, args);
+	va_end(args);
+
+	print_modules();
+	dump_stack();
+	print_oops_end_marker();
+	add_taint(TAINT_WARN);
+}
+EXPORT_SYMBOL(warn_slowpath);
 #endif
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-- 
cgit v1.2.3


From 7a2c477069fbd32f91598f05334003979b987a39 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 01:45:54 -0700
Subject: kernel/irq/manage.c: replace a printk + WARN_ON() to a WARN()

Replace a printk+WARN_ON() by a WARN(); this increases the chance of the
string making it into the bugreport (ie: it goes inside the
---[ cut here ]--- section)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/irq/manage.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 5bc6e5ecc49..f8914b92b66 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -260,9 +260,7 @@ int set_irq_wake(unsigned int irq, unsigned int on)
 		}
 	} else {
 		if (desc->wake_depth == 0) {
-			printk(KERN_WARNING "Unbalanced IRQ %d "
-					"wake disable\n", irq);
-			WARN_ON(1);
+			WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
 		} else if (--desc->wake_depth == 0) {
 			ret = set_irq_wake_real(irq, on);
 			if (ret)
-- 
cgit v1.2.3


From d955c78ac4699ac9c3fe07be62982cda13d13267 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 01:45:55 -0700
Subject: Example use of WARN()

Now that WARN() exists, we can fold some of the printk's into it.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/kobject.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/lib/kobject.c b/lib/kobject.c
index 744401571ed..bd732ffebc8 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -164,9 +164,8 @@ static int kobject_add_internal(struct kobject *kobj)
 		return -ENOENT;
 
 	if (!kobj->name || !kobj->name[0]) {
-		pr_debug("kobject: (%p): attempted to be registered with empty "
+		WARN(1, "kobject: (%p): attempted to be registered with empty "
 			 "name!\n", kobj);
-		WARN_ON(1);
 		return -EINVAL;
 	}
 
@@ -583,12 +582,10 @@ static void kobject_release(struct kref *kref)
 void kobject_put(struct kobject *kobj)
 {
 	if (kobj) {
-		if (!kobj->state_initialized) {
-			printk(KERN_WARNING "kobject: '%s' (%p): is not "
+		if (!kobj->state_initialized)
+			WARN(1, KERN_WARNING "kobject: '%s' (%p): is not "
 			       "initialized, yet kobject_put() is being "
 			       "called.\n", kobject_name(kobj), kobj);
-			WARN_ON(1);
-		}
 		kref_put(&kobj->kref, kobject_release);
 	}
 }
-- 
cgit v1.2.3


From 924d9addb9b1474fc81a78a5c6706755efea7aaa Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Fri, 25 Jul 2008 01:45:55 -0700
Subject: list debugging: use WARN() instead of BUG()

Arjan noted that the list_head debugging is BUG'ing when it detects
corruption.  By causing the box to panic immediately, we're possibly
losing some bug reports.  Changing this to a WARN() should mean we at the
least start seeing reports collected at kerneloops.org

Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/list_debug.c | 36 ++++++++++++++----------------------
 1 file changed, 14 insertions(+), 22 deletions(-)

diff --git a/lib/list_debug.c b/lib/list_debug.c
index 45c03fd608d..1a39f4e3ae1 100644
--- a/lib/list_debug.c
+++ b/lib/list_debug.c
@@ -20,18 +20,14 @@ void __list_add(struct list_head *new,
 			      struct list_head *prev,
 			      struct list_head *next)
 {
-	if (unlikely(next->prev != prev)) {
-		printk(KERN_ERR "list_add corruption. next->prev should be "
-			"prev (%p), but was %p. (next=%p).\n",
-			prev, next->prev, next);
-		BUG();
-	}
-	if (unlikely(prev->next != next)) {
-		printk(KERN_ERR "list_add corruption. prev->next should be "
-			"next (%p), but was %p. (prev=%p).\n",
-			next, prev->next, prev);
-		BUG();
-	}
+	WARN(next->prev != prev,
+		"list_add corruption. next->prev should be "
+		"prev (%p), but was %p. (next=%p).\n",
+		prev, next->prev, next);
+	WARN(prev->next != next,
+		"list_add corruption. prev->next should be "
+		"next (%p), but was %p. (prev=%p).\n",
+		next, prev->next, prev);
 	next->prev = new;
 	new->next = next;
 	new->prev = prev;
@@ -47,16 +43,12 @@ EXPORT_SYMBOL(__list_add);
  */
 void list_del(struct list_head *entry)
 {
-	if (unlikely(entry->prev->next != entry)) {
-		printk(KERN_ERR "list_del corruption. prev->next should be %p, "
-				"but was %p\n", entry, entry->prev->next);
-		BUG();
-	}
-	if (unlikely(entry->next->prev != entry)) {
-		printk(KERN_ERR "list_del corruption. next->prev should be %p, "
-				"but was %p\n", entry, entry->next->prev);
-		BUG();
-	}
+	WARN(entry->prev->next != entry,
+		"list_del corruption. prev->next should be %p, "
+		"but was %p\n", entry, entry->prev->next);
+	WARN(entry->next->prev != entry,
+		"list_del corruption. next->prev should be %p, "
+		"but was %p\n", entry, entry->next->prev);
 	__list_del(entry->prev, entry->next);
 	entry->next = LIST_POISON1;
 	entry->prev = LIST_POISON2;
-- 
cgit v1.2.3


From 2711b793eb62a5873a0ba583a69252040aef176e Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Fri, 25 Jul 2008 01:45:56 -0700
Subject: kallsyms: unify 32- and 64-bit code

Use the %p format string which already accounts for the padding you need
with a pointer type on a particular architecture.

Also replace the macro with a static inline function to match the rest of
the file.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/kallsyms.h | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 00c1801099f..57aefa160a9 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -6,6 +6,7 @@
 #define _LINUX_KALLSYMS_H
 
 #include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/stddef.h>
 
 #define KSYM_NAME_LEN 128
@@ -105,18 +106,10 @@ static inline void print_fn_descriptor_symbol(const char *fmt, void *addr)
 	print_symbol(fmt, (unsigned long)addr);
 }
 
-#ifndef CONFIG_64BIT
-#define print_ip_sym(ip)		\
-do {					\
-	printk("[<%08lx>]", ip);	\
-	print_symbol(" %s\n", ip);	\
-} while(0)
-#else
-#define print_ip_sym(ip)		\
-do {					\
-	printk("[<%016lx>]", ip);	\
-	print_symbol(" %s\n", ip);	\
-} while(0)
-#endif
+static inline void print_ip_sym(unsigned long ip)
+{
+	printk("[<%p>]", (void *) ip);
+	print_symbol(" %s\n", ip);
+}
 
 #endif /*_LINUX_KALLSYMS_H*/
-- 
cgit v1.2.3


From 717115e1a5856b57af0f71e1df7149108294fc10 Mon Sep 17 00:00:00 2001
From: Dave Young <hidave.darkstar@gmail.com>
Date: Fri, 25 Jul 2008 01:45:58 -0700
Subject: printk ratelimiting rewrite

All ratelimit user use same jiffies and burst params, so some messages
(callbacks) will be lost.

For example:
a call printk_ratelimit(5 * HZ, 1)
b call printk_ratelimit(5 * HZ, 1) before the 5*HZ timeout of a, then b will
will be supressed.

- rewrite __ratelimit, and use a ratelimit_state as parameter.  Thanks for
  hints from andrew.

- Add WARN_ON_RATELIMIT, update rcupreempt.h

- remove __printk_ratelimit

- use __ratelimit in net_ratelimit

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/bug.h  |  3 +++
 include/linux/kernel.h     |  8 ++-----
 include/linux/net.h        |  3 +--
 include/linux/ratelimit.h  | 27 +++++++++++++++++++++++
 include/linux/rcupreempt.h |  9 ++++++--
 kernel/printk.c            | 17 +++-----------
 kernel/sysctl.c            |  4 ++--
 lib/ratelimit.c            | 55 +++++++++++++++++++++++++---------------------
 net/core/sysctl_net_core.c |  4 ++--
 net/core/utils.c           |  5 ++---
 10 files changed, 79 insertions(+), 56 deletions(-)
 create mode 100644 include/linux/ratelimit.h

diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index a346e744e77..a3f738cffdb 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -97,6 +97,9 @@ extern void warn_slowpath(const char *file, const int line,
 	unlikely(__ret_warn_once);				\
 })
 
+#define WARN_ON_RATELIMIT(condition, state)			\
+		WARN_ON((condition) && __ratelimit(state))
+
 #ifdef CONFIG_SMP
 # define WARN_ON_SMP(x)			WARN_ON(x)
 #else
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 5c4b1251e11..fdbbf72ca2e 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -15,6 +15,7 @@
 #include <linux/bitops.h>
 #include <linux/log2.h>
 #include <linux/typecheck.h>
+#include <linux/ratelimit.h>
 #include <asm/byteorder.h>
 #include <asm/bug.h>
 
@@ -189,11 +190,8 @@ asmlinkage int vprintk(const char *fmt, va_list args)
 asmlinkage int printk(const char * fmt, ...)
 	__attribute__ ((format (printf, 1, 2))) __cold;
 
-extern int printk_ratelimit_jiffies;
-extern int printk_ratelimit_burst;
+extern struct ratelimit_state printk_ratelimit_state;
 extern int printk_ratelimit(void);
-extern int __ratelimit(int ratelimit_jiffies, int ratelimit_burst);
-extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
 				   unsigned int interval_msec);
 #else
@@ -204,8 +202,6 @@ static inline int printk(const char *s, ...)
 	__attribute__ ((format (printf, 1, 2)));
 static inline int __cold printk(const char *s, ...) { return 0; }
 static inline int printk_ratelimit(void) { return 0; }
-static inline int __printk_ratelimit(int ratelimit_jiffies, \
-				     int ratelimit_burst) { return 0; }
 static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
 					  unsigned int interval_msec)	\
 		{ return false; }
diff --git a/include/linux/net.h b/include/linux/net.h
index 2f999fbb188..4a9a30f2d68 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -351,8 +351,7 @@ static const struct proto_ops name##_ops = {			\
 
 #ifdef CONFIG_SYSCTL
 #include <linux/sysctl.h>
-extern int net_msg_cost;
-extern int net_msg_burst;
+extern struct ratelimit_state net_ratelimit_state;
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h
new file mode 100644
index 00000000000..18a5b9ba9d4
--- /dev/null
+++ b/include/linux/ratelimit.h
@@ -0,0 +1,27 @@
+#ifndef _LINUX_RATELIMIT_H
+#define _LINUX_RATELIMIT_H
+#include <linux/param.h>
+
+#define DEFAULT_RATELIMIT_INTERVAL (5 * HZ)
+#define DEFAULT_RATELIMIT_BURST 10
+
+struct ratelimit_state {
+	int interval;
+	int burst;
+	int printed;
+	int missed;
+	unsigned long begin;
+};
+
+#define DEFINE_RATELIMIT_STATE(name, interval, burst)		\
+		struct ratelimit_state name = {interval, burst,}
+
+extern int __ratelimit(struct ratelimit_state *rs);
+
+static inline int ratelimit(void)
+{
+	static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
+					DEFAULT_RATELIMIT_BURST);
+	return __ratelimit(&rs);
+}
+#endif
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index f04b64eca63..0967f03b070 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -115,16 +115,21 @@ DECLARE_PER_CPU(struct rcu_dyntick_sched, rcu_dyntick_sched);
 
 static inline void rcu_enter_nohz(void)
 {
+	static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
+
 	smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
 	__get_cpu_var(rcu_dyntick_sched).dynticks++;
-	WARN_ON(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1);
+	WARN_ON_RATELIMIT(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1, &rs);
 }
 
 static inline void rcu_exit_nohz(void)
 {
+	static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
+
 	smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
 	__get_cpu_var(rcu_dyntick_sched).dynticks++;
-	WARN_ON(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1));
+	WARN_ON_RATELIMIT(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1),
+				&rs);
 }
 
 #else /* CONFIG_NO_HZ */
diff --git a/kernel/printk.c b/kernel/printk.c
index 3f7a2a94583..a7f7559c5f6 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1308,6 +1308,8 @@ void tty_write_message(struct tty_struct *tty, char *msg)
 }
 
 #if defined CONFIG_PRINTK
+
+DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
 /*
  * printk rate limiting, lifted from the networking subsystem.
  *
@@ -1315,22 +1317,9 @@ void tty_write_message(struct tty_struct *tty, char *msg)
  * every printk_ratelimit_jiffies to make a denial-of-service
  * attack impossible.
  */
-int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst)
-{
-	return __ratelimit(ratelimit_jiffies, ratelimit_burst);
-}
-EXPORT_SYMBOL(__printk_ratelimit);
-
-/* minimum time in jiffies between messages */
-int printk_ratelimit_jiffies = 5 * HZ;
-
-/* number of messages we send before ratelimiting */
-int printk_ratelimit_burst = 10;
-
 int printk_ratelimit(void)
 {
-	return __printk_ratelimit(printk_ratelimit_jiffies,
-				printk_ratelimit_burst);
+	return __ratelimit(&printk_ratelimit_state);
 }
 EXPORT_SYMBOL(printk_ratelimit);
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 1a8299d1fe5..35a50db9b6c 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -624,7 +624,7 @@ static struct ctl_table kern_table[] = {
 	{
 		.ctl_name	= KERN_PRINTK_RATELIMIT,
 		.procname	= "printk_ratelimit",
-		.data		= &printk_ratelimit_jiffies,
+		.data		= &printk_ratelimit_state.interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec_jiffies,
@@ -633,7 +633,7 @@ static struct ctl_table kern_table[] = {
 	{
 		.ctl_name	= KERN_PRINTK_RATELIMIT_BURST,
 		.procname	= "printk_ratelimit_burst",
-		.data		= &printk_ratelimit_burst,
+		.data		= &printk_ratelimit_state.burst,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
diff --git a/lib/ratelimit.c b/lib/ratelimit.c
index 485e3040dcd..35136671b21 100644
--- a/lib/ratelimit.c
+++ b/lib/ratelimit.c
@@ -3,6 +3,9 @@
  *
  * Isolated from kernel/printk.c by Dave Young <hidave.darkstar@gmail.com>
  *
+ * 2008-05-01 rewrite the function and use a ratelimit_state data struct as
+ * parameter. Now every user can use their own standalone ratelimit_state.
+ *
  * This file is released under the GPLv2.
  *
  */
@@ -11,41 +14,43 @@
 #include <linux/jiffies.h>
 #include <linux/module.h>
 
+static DEFINE_SPINLOCK(ratelimit_lock);
+static unsigned long flags;
+
 /*
  * __ratelimit - rate limiting
- * @ratelimit_jiffies: minimum time in jiffies between two callbacks
- * @ratelimit_burst: number of callbacks we do before ratelimiting
+ * @rs: ratelimit_state data
  *
- * This enforces a rate limit: not more than @ratelimit_burst callbacks
- * in every ratelimit_jiffies
+ * This enforces a rate limit: not more than @rs->ratelimit_burst callbacks
+ * in every @rs->ratelimit_jiffies
  */
-int __ratelimit(int ratelimit_jiffies, int ratelimit_burst)
+int __ratelimit(struct ratelimit_state *rs)
 {
-	static DEFINE_SPINLOCK(ratelimit_lock);
-	static unsigned toks = 10 * 5 * HZ;
-	static unsigned long last_msg;
-	static int missed;
-	unsigned long flags;
-	unsigned long now = jiffies;
+	if (!rs->interval)
+		return 1;
 
 	spin_lock_irqsave(&ratelimit_lock, flags);
-	toks += now - last_msg;
-	last_msg = now;
-	if (toks > (ratelimit_burst * ratelimit_jiffies))
-		toks = ratelimit_burst * ratelimit_jiffies;
-	if (toks >= ratelimit_jiffies) {
-		int lost = missed;
+	if (!rs->begin)
+		rs->begin = jiffies;
 
-		missed = 0;
-		toks -= ratelimit_jiffies;
-		spin_unlock_irqrestore(&ratelimit_lock, flags);
-		if (lost)
-			printk(KERN_WARNING "%s: %d messages suppressed\n",
-				__func__, lost);
-		return 1;
+	if (time_is_before_jiffies(rs->begin + rs->interval)) {
+		if (rs->missed)
+			printk(KERN_WARNING "%s: %d callbacks suppressed\n",
+				__func__, rs->missed);
+		rs->begin = 0;
+		rs->printed = 0;
+		rs->missed = 0;
 	}
-	missed++;
+	if (rs->burst && rs->burst > rs->printed)
+		goto print;
+
+	rs->missed++;
 	spin_unlock_irqrestore(&ratelimit_lock, flags);
 	return 0;
+
+print:
+	rs->printed++;
+	spin_unlock_irqrestore(&ratelimit_lock, flags);
+	return 1;
 }
 EXPORT_SYMBOL(__ratelimit);
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index a570e2af22c..f686467ff12 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -67,7 +67,7 @@ static struct ctl_table net_core_table[] = {
 	{
 		.ctl_name	= NET_CORE_MSG_COST,
 		.procname	= "message_cost",
-		.data		= &net_msg_cost,
+		.data		= &net_ratelimit_state.interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec_jiffies,
@@ -76,7 +76,7 @@ static struct ctl_table net_core_table[] = {
 	{
 		.ctl_name	= NET_CORE_MSG_BURST,
 		.procname	= "message_burst",
-		.data		= &net_msg_burst,
+		.data		= &net_ratelimit_state.burst,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
diff --git a/net/core/utils.c b/net/core/utils.c
index 8031eb59054..72e0ebe964a 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -31,17 +31,16 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
-int net_msg_cost __read_mostly = 5*HZ;
-int net_msg_burst __read_mostly = 10;
 int net_msg_warn __read_mostly = 1;
 EXPORT_SYMBOL(net_msg_warn);
 
+DEFINE_RATELIMIT_STATE(net_ratelimit_state, 5 * HZ, 10);
 /*
  * All net warning printk()s should be guarded by this function.
  */
 int net_ratelimit(void)
 {
-	return __printk_ratelimit(net_msg_cost, net_msg_burst);
+	return __ratelimit(&net_ratelimit_state);
 }
 EXPORT_SYMBOL(net_ratelimit);
 
-- 
cgit v1.2.3


From 472dba7d117844c746be97db6be26c2810d79b62 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 25 Jul 2008 01:45:58 -0700
Subject: sm501: add power control callback

Add callback to get or set the power control if the device has the sleep
connected to some form of GPIO.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/sm501.c   | 31 +++++++++++++++++++++++++++++++
 include/linux/sm501.h |  7 +++++++
 2 files changed, 38 insertions(+)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index e2530df4d85..9296b2673b5 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1138,8 +1138,31 @@ static int sm501_plat_probe(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM
+
 /* power management support */
 
+static void sm501_set_power(struct sm501_devdata *sm, int on)
+{
+	struct sm501_platdata *pd = sm->platdata;
+
+	if (pd == NULL)
+		return;
+
+	if (pd->get_power) {
+		if (pd->get_power(sm->dev) == on) {
+			dev_dbg(sm->dev, "is already %d\n", on);
+			return;
+		}
+	}
+
+	if (pd->set_power) {
+		dev_dbg(sm->dev, "setting power to %d\n", on);
+
+		pd->set_power(sm->dev, on);
+		sm501_mdelay(sm, 10);
+	}
+}
+
 static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct sm501_devdata *sm = platform_get_drvdata(pdev);
@@ -1148,6 +1171,12 @@ static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
 	sm->pm_misc = readl(sm->regs + SM501_MISC_CONTROL);
 
 	sm501_dump_regs(sm);
+
+	if (sm->platdata) {
+		if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
+			sm501_set_power(sm, 0);
+	}
+
 	return 0;
 }
 
@@ -1155,6 +1184,8 @@ static int sm501_plat_resume(struct platform_device *pdev)
 {
 	struct sm501_devdata *sm = platform_get_drvdata(pdev);
 
+	sm501_set_power(sm, 1);
+
 	sm501_dump_regs(sm);
 	sm501_dump_gate(sm);
 	sm501_dump_clk(sm);
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index b530fa6a1d3..145405bf9ef 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -157,6 +157,8 @@ struct sm501_init_gpio {
 	struct sm501_reg_init	gpio_ddr_high;
 };
 
+#define SM501_FLAG_SUSPEND_OFF		(1<<4)
+
 /* sm501_platdata
  *
  * This is passed with the platform device to allow the board
@@ -170,6 +172,11 @@ struct sm501_platdata {
 	struct sm501_init_gpio		*init_gpiop;
 	struct sm501_platdata_fb	*fb;
 
+	int				 flags;
+
+	int	(*get_power)(struct device *dev);
+	int	(*set_power)(struct device *dev, unsigned int on);
+
 	struct sm501_platdata_gpio_i2c	*gpio_i2c;
 	unsigned int			 gpio_i2c_nr;
 };
-- 
cgit v1.2.3


From f61be273d3699d174bc1438e6804f9f9e52bb932 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 25 Jul 2008 01:45:59 -0700
Subject: sm501: add gpiolib support

Add support for exporting the GPIOs on the SM501 via gpiolib.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/Kconfig   |   8 ++
 drivers/mfd/sm501.c   | 299 +++++++++++++++++++++++++++++++++++++++++---------
 include/linux/sm501.h |  20 +---
 3 files changed, 257 insertions(+), 70 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9f93c29fed3..bac9e973ece 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -19,6 +19,14 @@ config MFD_SM501
 	  interface. The device may be connected by PCI or local bus with
 	  varying functions enabled.
 
+config MFD_SM501_GPIO
+	bool "Export GPIO via GPIO layer"
+	depends on MFD_SM501 && HAVE_GPIO_LIB
+	 ---help---
+	 This option uses the gpio library layer to export the 64 GPIO
+	 lines on the SM501. The platform data is used to supply the
+	 base number for the first GPIO line to register.
+
 config MFD_ASIC3
 	bool "Support for Compaq ASIC3"
 	depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 9296b2673b5..be871390812 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -19,6 +19,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
+#include <linux/gpio.h>
 
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
@@ -31,10 +32,29 @@ struct sm501_device {
 	struct platform_device		pdev;
 };
 
+struct sm501_gpio;
+
+struct sm501_gpio_chip {
+	struct gpio_chip	gpio;
+	struct sm501_gpio	*ourgpio;	/* to get back to parent. */
+	void __iomem		*regbase;
+};
+
+struct sm501_gpio {
+	struct sm501_gpio_chip	low;
+	struct sm501_gpio_chip	high;
+	spinlock_t		lock;
+
+	unsigned int		 registered : 1;
+	void __iomem		*regs;
+	struct resource		*regs_res;
+};
+
 struct sm501_devdata {
 	spinlock_t			 reg_lock;
 	struct mutex			 clock_lock;
 	struct list_head		 devices;
+	struct sm501_gpio		 gpio;
 
 	struct device			*dev;
 	struct resource			*io_res;
@@ -42,6 +62,7 @@ struct sm501_devdata {
 	struct resource			*regs_claim;
 	struct sm501_platdata		*platdata;
 
+
 	unsigned int			 in_suspend;
 	unsigned long			 pm_misc;
 
@@ -52,6 +73,7 @@ struct sm501_devdata {
 	unsigned int			 rev;
 };
 
+
 #define MHZ (1000 * 1000)
 
 #ifdef DEBUG
@@ -276,58 +298,6 @@ unsigned long sm501_modify_reg(struct device *dev,
 
 EXPORT_SYMBOL_GPL(sm501_modify_reg);
 
-unsigned long sm501_gpio_get(struct device *dev,
-			     unsigned long gpio)
-{
-	struct sm501_devdata *sm = dev_get_drvdata(dev);
-	unsigned long result;
-	unsigned long reg;
-
-	reg = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW;
-	result = readl(sm->regs + reg);
-
-	result >>= (gpio & 31);
-	return result & 1UL;
-}
-
-EXPORT_SYMBOL_GPL(sm501_gpio_get);
-
-void sm501_gpio_set(struct device *dev,
-		    unsigned long gpio,
-		    unsigned int to,
-		    unsigned int dir)
-{
-	struct sm501_devdata *sm = dev_get_drvdata(dev);
-
-	unsigned long bit = 1 << (gpio & 31);
-	unsigned long base;
-	unsigned long save;
-	unsigned long val;
-
-	base = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW;
-	base += SM501_GPIO;
-
-	spin_lock_irqsave(&sm->reg_lock, save);
-
-	val = readl(sm->regs + base) & ~bit;
-	if (to)
-		val |= bit;
-	writel(val, sm->regs + base);
-
-	val = readl(sm->regs + SM501_GPIO_DDR_LOW) & ~bit;
-	if (dir)
-		val |= bit;
-
-	writel(val, sm->regs + SM501_GPIO_DDR_LOW);
-	sm501_sync_regs(sm);
-
-	spin_unlock_irqrestore(&sm->reg_lock, save);
-
-}
-
-EXPORT_SYMBOL_GPL(sm501_gpio_set);
-
-
 /* sm501_unit_power
  *
  * alters the power active gate to set specific units on or off
@@ -906,6 +876,226 @@ static int sm501_register_display(struct sm501_devdata *sm,
 	return sm501_register_device(sm, pdev);
 }
 
+#ifdef CONFIG_MFD_SM501_GPIO
+
+static inline struct sm501_gpio_chip *to_sm501_gpio(struct gpio_chip *gc)
+{
+	return container_of(gc, struct sm501_gpio_chip, gpio);
+}
+
+static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
+{
+	return container_of(gpio, struct sm501_devdata, gpio);
+}
+
+static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
+
+{
+	struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip);
+	unsigned long result;
+
+	result = readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
+	result >>= offset;
+
+	return result & 1UL;
+}
+
+static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+
+{
+	struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
+	struct sm501_gpio *smgpio = smchip->ourgpio;
+	unsigned long bit = 1 << offset;
+	void __iomem *regs = smchip->regbase;
+	unsigned long save;
+	unsigned long val;
+
+	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+		__func__, chip, offset);
+
+	spin_lock_irqsave(&smgpio->lock, save);
+
+	val = readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
+	if (value)
+		val |= bit;
+	writel(val, regs);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	spin_unlock_irqrestore(&smgpio->lock, save);
+}
+
+static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
+	struct sm501_gpio *smgpio = smchip->ourgpio;
+	void __iomem *regs = smchip->regbase;
+	unsigned long bit = 1 << offset;
+	unsigned long save;
+	unsigned long ddr;
+
+	dev_info(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+		 __func__, chip, offset);
+
+	spin_lock_irqsave(&smgpio->lock, save);
+
+	ddr = readl(regs + SM501_GPIO_DDR_LOW);
+	writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	spin_unlock_irqrestore(&smgpio->lock, save);
+
+	return 0;
+}
+
+static int sm501_gpio_output(struct gpio_chip *chip,
+			     unsigned offset, int value)
+{
+	struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
+	struct sm501_gpio *smgpio = smchip->ourgpio;
+	unsigned long bit = 1 << offset;
+	void __iomem *regs = smchip->regbase;
+	unsigned long save;
+	unsigned long val;
+	unsigned long ddr;
+
+	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
+		__func__, chip, offset, value);
+
+	spin_lock_irqsave(&smgpio->lock, save);
+
+	val = readl(regs + SM501_GPIO_DATA_LOW);
+	if (value)
+		val |= bit;
+	else
+		val &= ~bit;
+	writel(val, regs);
+
+	ddr = readl(regs + SM501_GPIO_DDR_LOW);
+	writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	writel(val, regs + SM501_GPIO_DATA_LOW);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	spin_unlock_irqrestore(&smgpio->lock, save);
+
+	return 0;
+}
+
+static struct gpio_chip gpio_chip_template = {
+	.ngpio			= 32,
+	.direction_input	= sm501_gpio_input,
+	.direction_output	= sm501_gpio_output,
+	.set			= sm501_gpio_set,
+	.get			= sm501_gpio_get,
+};
+
+static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
+					      struct sm501_gpio *gpio,
+					      struct sm501_gpio_chip *chip)
+{
+	struct sm501_platdata *pdata = sm->platdata;
+	struct gpio_chip *gchip = &chip->gpio;
+	unsigned base = pdata->gpio_base;
+
+	memcpy(chip, &gpio_chip_template, sizeof(struct gpio_chip));
+
+	if (chip == &gpio->high) {
+		base += 32;
+		chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
+		gchip->label  = "SM501-HIGH";
+	} else {
+		chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
+		gchip->label  = "SM501-LOW";
+	}
+
+	gchip->base   = base;
+	chip->ourgpio = gpio;
+
+	return gpiochip_add(gchip);
+}
+
+static int sm501_register_gpio(struct sm501_devdata *sm)
+{
+	struct sm501_gpio *gpio = &sm->gpio;
+	resource_size_t iobase = sm->io_res->start + SM501_GPIO;
+	int ret;
+	int tmp;
+
+	dev_dbg(sm->dev, "registering gpio block %08llx\n",
+		(unsigned long long)iobase);
+
+	spin_lock_init(&gpio->lock);
+
+	gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
+	if (gpio->regs_res == NULL) {
+		dev_err(sm->dev, "gpio: failed to request region\n");
+		return -ENXIO;
+	}
+
+	gpio->regs = ioremap(iobase, 0x20);
+	if (gpio->regs == NULL) {
+		dev_err(sm->dev, "gpio: failed to remap registers\n");
+		ret = -ENXIO;
+		goto err_mapped;
+	}
+
+	/* Register both our chips. */
+
+	ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
+	if (ret) {
+		dev_err(sm->dev, "failed to add low chip\n");
+		goto err_mapped;
+	}
+
+	ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
+	if (ret) {
+		dev_err(sm->dev, "failed to add high chip\n");
+		goto err_low_chip;
+	}
+
+	gpio->registered = 1;
+
+	return 0;
+
+ err_low_chip:
+	tmp = gpiochip_remove(&gpio->low.gpio);
+	if (tmp) {
+		dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
+		return ret;
+	}
+
+ err_mapped:
+	release_resource(gpio->regs_res);
+	kfree(gpio->regs_res);
+
+	return ret;
+}
+
+static void sm501_gpio_remove(struct sm501_devdata *sm)
+{
+	int ret;
+
+	ret = gpiochip_remove(&sm->gpio.low.gpio);
+	if (ret)
+		dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
+
+	ret = gpiochip_remove(&sm->gpio.high.gpio);
+	if (ret)
+		dev_err(sm->dev, "cannot remove high chip, cannot tidy up\n");
+}
+
+#else
+static int sm501_register_gpio(struct sm501_devdata *sm)
+{
+	return 0;
+}
+
+static void sm501_gpio_remove(struct sm501_devdata *sm)
+{
+}
+#endif
+
 /* sm501_dbg_regs
  *
  * Debug attribute to attach to parent device to show core registers
@@ -1059,6 +1249,8 @@ static int sm501_init_dev(struct sm501_devdata *sm)
 			sm501_register_usbhost(sm, &mem_avail);
 		if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
 			sm501_register_uart(sm, idata->devices);
+		if (idata->devices & SM501_USE_GPIO)
+			sm501_register_gpio(sm);
 	}
 
 	ret = sm501_check_clocks(sm);
@@ -1366,6 +1558,9 @@ static void sm501_dev_remove(struct sm501_devdata *sm)
 		sm501_remove_sub(sm, smdev);
 
 	device_remove_file(sm->dev, &dev_attr_dbg_regs);
+
+	if (sm->gpio.registered)
+		sm501_gpio_remove(sm);
 }
 
 static void sm501_pci_remove(struct pci_dev *dev)
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index 145405bf9ef..6ea39007c8a 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -46,24 +46,6 @@ extern unsigned long sm501_modify_reg(struct device *dev,
 				      unsigned long set,
 				      unsigned long clear);
 
-/* sm501_gpio_set
- *
- * set the state of the given GPIO line
-*/
-
-extern void sm501_gpio_set(struct device *dev,
-			   unsigned long gpio,
-			   unsigned int to,
-			   unsigned int dir);
-
-/* sm501_gpio_get
- *
- * get the state of the given GPIO line
-*/
-
-extern unsigned long sm501_gpio_get(struct device *dev,
-				    unsigned long gpio);
-
 
 /* Platform data definitions */
 
@@ -131,6 +113,7 @@ struct sm501_reg_init {
 #define SM501_USE_FBACCEL	(1<<6)
 #define SM501_USE_AC97		(1<<7)
 #define SM501_USE_I2S		(1<<8)
+#define SM501_USE_GPIO		(1<<9)
 
 #define SM501_USE_ALL		(0xffffffff)
 
@@ -173,6 +156,7 @@ struct sm501_platdata {
 	struct sm501_platdata_fb	*fb;
 
 	int				 flags;
+	unsigned			 gpio_base;
 
 	int	(*get_power)(struct device *dev);
 	int	(*set_power)(struct device *dev, unsigned int on);
-- 
cgit v1.2.3


From 60e540d617b40eb3d37f1dd99c97af588ff9b70b Mon Sep 17 00:00:00 2001
From: Arnaud Patard <apatard@mandriva.com>
Date: Fri, 25 Jul 2008 01:46:00 -0700
Subject: sm501: gpio dynamic registration for PCI devices

The SM501 PCI card requires a dyanmic gpio allocation as the number of
cards is not known at compile time.  Fixup the platform data and
registration to deal with this.

Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/sm501.c   | 6 ++++--
 include/linux/sm501.h | 2 +-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index be871390812..c3e5a48f614 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -996,12 +996,13 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
 {
 	struct sm501_platdata *pdata = sm->platdata;
 	struct gpio_chip *gchip = &chip->gpio;
-	unsigned base = pdata->gpio_base;
+	int base = pdata->gpio_base;
 
 	memcpy(chip, &gpio_chip_template, sizeof(struct gpio_chip));
 
 	if (chip == &gpio->high) {
-		base += 32;
+		if (base > 0)
+			base += 32;
 		chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
 		gchip->label  = "SM501-HIGH";
 	} else {
@@ -1452,6 +1453,7 @@ static struct sm501_platdata_fb sm501_fb_pdata = {
 static struct sm501_platdata sm501_pci_platdata = {
 	.init		= &sm501_pci_initdata,
 	.fb		= &sm501_fb_pdata,
+	.gpio_base	= -1,
 };
 
 static int sm501_pci_probe(struct pci_dev *dev,
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index 6ea39007c8a..a8d02f36ad3 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -156,7 +156,7 @@ struct sm501_platdata {
 	struct sm501_platdata_fb	*fb;
 
 	int				 flags;
-	unsigned			 gpio_base;
+	int				 gpio_base;
 
 	int	(*get_power)(struct device *dev);
 	int	(*set_power)(struct device *dev, unsigned int on);
-- 
cgit v1.2.3


From 42cd2366fb9b58cdfc1855be32b31a78e40b2079 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 25 Jul 2008 01:46:01 -0700
Subject: sm501: gpio I2C support

Add support for adding the GPIO based I2C resources.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/sm501.c   | 76 ++++++++++++++++++++++++++++++++++++++++++++++++++-
 include/linux/sm501.h | 10 ++++++-
 2 files changed, 84 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index c3e5a48f614..107215b2880 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/gpio.h>
+#include <linux/i2c-gpio.h>
 
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
@@ -1086,6 +1087,11 @@ static void sm501_gpio_remove(struct sm501_devdata *sm)
 		dev_err(sm->dev, "cannot remove high chip, cannot tidy up\n");
 }
 
+static int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
+{
+	struct sm501_gpio *gpio = &sm->gpio;
+	return pin + (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
+}
 #else
 static int sm501_register_gpio(struct sm501_devdata *sm)
 {
@@ -1095,8 +1101,66 @@ static int sm501_register_gpio(struct sm501_devdata *sm)
 static void sm501_gpio_remove(struct sm501_devdata *sm)
 {
 }
+
+static int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
+{
+	return -1;
+}
 #endif
 
+static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
+					    struct sm501_platdata_gpio_i2c *iic)
+{
+	struct i2c_gpio_platform_data *icd;
+	struct platform_device *pdev;
+
+	pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
+				   sizeof(struct i2c_gpio_platform_data));
+	if (!pdev)
+		return -ENOMEM;
+
+	icd = pdev->dev.platform_data;
+
+	/* We keep the pin_sda and pin_scl fields relative in case the
+	 * same platform data is passed to >1 SM501.
+	 */
+
+	icd->sda_pin = sm501_gpio_pin2nr(sm, iic->pin_sda);
+	icd->scl_pin = sm501_gpio_pin2nr(sm, iic->pin_scl);
+	icd->timeout = iic->timeout;
+	icd->udelay = iic->udelay;
+
+	/* note, we can't use either of the pin numbers, as the i2c-gpio
+	 * driver uses the platform.id field to generate the bus number
+	 * to register with the i2c core; The i2c core doesn't have enough
+	 * entries to deal with anything we currently use.
+	*/
+
+	pdev->id = iic->bus_num;
+
+	dev_info(sm->dev, "registering i2c-%d: sda=%d (%d), scl=%d (%d)\n",
+		 iic->bus_num,
+		 icd->sda_pin, iic->pin_sda, icd->scl_pin, iic->pin_scl);
+
+	return sm501_register_device(sm, pdev);
+}
+
+static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
+				   struct sm501_platdata *pdata)
+{
+	struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
+	int index;
+	int ret;
+
+	for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
+		ret = sm501_register_gpio_i2c_instance(sm, iic);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 /* sm501_dbg_regs
  *
  * Debug attribute to attach to parent device to show core registers
@@ -1204,6 +1268,7 @@ static unsigned int sm501_mem_local[] = {
 static int sm501_init_dev(struct sm501_devdata *sm)
 {
 	struct sm501_initdata *idata;
+	struct sm501_platdata *pdata;
 	resource_size_t mem_avail;
 	unsigned long dramctrl;
 	unsigned long devid;
@@ -1242,7 +1307,9 @@ static int sm501_init_dev(struct sm501_devdata *sm)
 
 	/* check to see if we have some device initialisation */
 
-	idata = sm->platdata ? sm->platdata->init : NULL;
+	pdata = sm->platdata;
+	idata = pdata ? pdata->init : NULL;
+
 	if (idata) {
 		sm501_init_regs(sm, idata);
 
@@ -1254,6 +1321,13 @@ static int sm501_init_dev(struct sm501_devdata *sm)
 			sm501_register_gpio(sm);
 	}
 
+	if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
+		if (!sm->gpio.registered)
+			dev_err(sm->dev, "no gpio registered for i2c gpio.\n");
+		else
+			sm501_register_gpio_i2c(sm, pdata);
+	}
+
 	ret = sm501_check_clocks(sm);
 	if (ret) {
 		dev_err(sm->dev, "M1X and M clocks sourced from different "
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index a8d02f36ad3..214f93209b8 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -86,11 +86,19 @@ struct sm501_platdata_fb {
 	struct sm501_platdata_fbsub	*fb_pnl;
 };
 
-/* gpio i2c */
+/* gpio i2c
+ *
+ * Note, we have to pass in the bus number, as the number used will be
+ * passed to the i2c-gpio driver's platform_device.id, subsequently used
+ * to register the i2c bus.
+*/
 
 struct sm501_platdata_gpio_i2c {
+	unsigned int		bus_num;
 	unsigned int		pin_sda;
 	unsigned int		pin_scl;
+	int			udelay;
+	int			timeout;
 };
 
 /* sm501_initdata
-- 
cgit v1.2.3


From 28130bea3bcfefe3437b0a5dcab786f1f0296953 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 25 Jul 2008 01:46:02 -0700
Subject: sm501: fixes for akpms comments on gpiolib addition

Fixup the comments from the patch that added the gpiolib support from
Andrew Morton.  These include spotting some missing frees on error or
release, and changing a memcpy for a type-safe assingment.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/sm501.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 107215b2880..2dfb41aabca 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -999,7 +999,7 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
 	struct gpio_chip *gchip = &chip->gpio;
 	int base = pdata->gpio_base;
 
-	memcpy(chip, &gpio_chip_template, sizeof(struct gpio_chip));
+	chip->gpio = gpio_chip_template;
 
 	if (chip == &gpio->high) {
 		if (base > 0)
@@ -1039,7 +1039,7 @@ static int sm501_register_gpio(struct sm501_devdata *sm)
 	if (gpio->regs == NULL) {
 		dev_err(sm->dev, "gpio: failed to remap registers\n");
 		ret = -ENXIO;
-		goto err_mapped;
+		goto err_claimed;
 	}
 
 	/* Register both our chips. */
@@ -1068,6 +1068,9 @@ static int sm501_register_gpio(struct sm501_devdata *sm)
 	}
 
  err_mapped:
+	iounmap(gpio->regs);
+
+ err_claimed:
 	release_resource(gpio->regs_res);
 	kfree(gpio->regs_res);
 
@@ -1076,33 +1079,38 @@ static int sm501_register_gpio(struct sm501_devdata *sm)
 
 static void sm501_gpio_remove(struct sm501_devdata *sm)
 {
+	struct sm501_gpio *gpio = &sm->gpio;
 	int ret;
 
-	ret = gpiochip_remove(&sm->gpio.low.gpio);
+	ret = gpiochip_remove(&gpio->low.gpio);
 	if (ret)
 		dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
 
-	ret = gpiochip_remove(&sm->gpio.high.gpio);
+	ret = gpiochip_remove(&gpio->high.gpio);
 	if (ret)
 		dev_err(sm->dev, "cannot remove high chip, cannot tidy up\n");
+
+	iounmap(gpio->regs);
+	release_resource(gpio->regs_res);
+	kfree(gpio->regs_res);
 }
 
-static int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
+static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
 {
 	struct sm501_gpio *gpio = &sm->gpio;
 	return pin + (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
 }
 #else
-static int sm501_register_gpio(struct sm501_devdata *sm)
+static inline int sm501_register_gpio(struct sm501_devdata *sm)
 {
 	return 0;
 }
 
-static void sm501_gpio_remove(struct sm501_devdata *sm)
+static inline void sm501_gpio_remove(struct sm501_devdata *sm)
 {
 }
 
-static int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
+static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
 {
 	return -1;
 }
-- 
cgit v1.2.3


From f2999209d779573e17468b680f5f267d8cb2a9c7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 25 Jul 2008 01:46:02 -0700
Subject: mfd: sm501 build fixes when CONFIG_MFD_SM501_GPIO unset

Fix the build problems if CONFIG_MFD_SM501_GPIO is not set, which is
generally when there is no gpiolib support available as currently happens
on x86 when building PCI SM501.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/sm501.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 2dfb41aabca..79d7aea5510 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -19,7 +19,6 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
-#include <linux/gpio.h>
 #include <linux/i2c-gpio.h>
 
 #include <linux/sm501.h>
@@ -35,6 +34,9 @@ struct sm501_device {
 
 struct sm501_gpio;
 
+#ifdef CONFIG_MFD_SM501_GPIO
+#include <linux/gpio.h>
+
 struct sm501_gpio_chip {
 	struct gpio_chip	gpio;
 	struct sm501_gpio	*ourgpio;	/* to get back to parent. */
@@ -50,6 +52,11 @@ struct sm501_gpio {
 	void __iomem		*regs;
 	struct resource		*regs_res;
 };
+#else
+struct sm501_gpio {
+	/* no gpio support, empty definition for sm501_devdata. */
+};
+#endif
 
 struct sm501_devdata {
 	spinlock_t			 reg_lock;
@@ -1082,6 +1089,9 @@ static void sm501_gpio_remove(struct sm501_devdata *sm)
 	struct sm501_gpio *gpio = &sm->gpio;
 	int ret;
 
+	if (!sm->gpio.registered)
+		return;
+
 	ret = gpiochip_remove(&gpio->low.gpio);
 	if (ret)
 		dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
@@ -1100,6 +1110,11 @@ static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
 	struct sm501_gpio *gpio = &sm->gpio;
 	return pin + (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
 }
+
+static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
+{
+	return sm->gpio.registered;
+}
 #else
 static inline int sm501_register_gpio(struct sm501_devdata *sm)
 {
@@ -1114,6 +1129,11 @@ static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
 {
 	return -1;
 }
+
+static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
+{
+	return 0;
+}
 #endif
 
 static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
@@ -1330,8 +1350,8 @@ static int sm501_init_dev(struct sm501_devdata *sm)
 	}
 
 	if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
-		if (!sm->gpio.registered)
-			dev_err(sm->dev, "no gpio registered for i2c gpio.\n");
+		if (!sm501_gpio_isregistered(sm))
+			dev_err(sm->dev, "no gpio available for i2c gpio.\n");
 		else
 			sm501_register_gpio_i2c(sm, pdata);
 	}
@@ -1643,8 +1663,7 @@ static void sm501_dev_remove(struct sm501_devdata *sm)
 
 	device_remove_file(sm->dev, &dev_attr_dbg_regs);
 
-	if (sm->gpio.registered)
-		sm501_gpio_remove(sm);
+	sm501_gpio_remove(sm);
 }
 
 static void sm501_pci_remove(struct pci_dev *dev)
-- 
cgit v1.2.3


From 53a9600c634e3bfd6230e0597aca159bf4d4d010 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 25 Jul 2008 01:46:03 -0700
Subject: mfd: sm501 fix gpio number calculation for upper bank

The sm501_gpio_pin2nr() routine returns the wrong values for gpios in the
upper bank.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/sm501.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 79d7aea5510..7aebad4c06f 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1108,7 +1108,9 @@ static void sm501_gpio_remove(struct sm501_devdata *sm)
 static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
 {
 	struct sm501_gpio *gpio = &sm->gpio;
-	return pin + (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
+	int base = (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
+
+	return (pin % 32) + base;
 }
 
 static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
-- 
cgit v1.2.3


From ef53d9c5e4da147ecaa43c44c5e5945eb83970a2 Mon Sep 17 00:00:00 2001
From: Srinivasa D S <srinivasa@in.ibm.com>
Date: Fri, 25 Jul 2008 01:46:04 -0700
Subject: kprobes: improve kretprobe scalability with hashed locking

Currently list of kretprobe instances are stored in kretprobe object (as
used_instances,free_instances) and in kretprobe hash table.  We have one
global kretprobe lock to serialise the access to these lists.  This causes
only one kretprobe handler to execute at a time.  Hence affects system
performance, particularly on SMP systems and when return probe is set on
lot of functions (like on all systemcalls).

Solution proposed here gives fine-grain locks that performs better on SMP
system compared to present kretprobe implementation.

Solution:

 1) Instead of having one global lock to protect kretprobe instances
    present in kretprobe object and kretprobe hash table.  We will have
    two locks, one lock for protecting kretprobe hash table and another
    lock for kretporbe object.

 2) We hold lock present in kretprobe object while we modify kretprobe
    instance in kretprobe object and we hold per-hash-list lock while
    modifying kretprobe instances present in that hash list.  To prevent
    deadlock, we never grab a per-hash-list lock while holding a kretprobe
    lock.

 3) We can remove used_instances from struct kretprobe, as we can
    track used instances of kretprobe instances using kretprobe hash
    table.

Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system
with return probes set on all systemcalls looks like this.

cacheline              non-cacheline             Un-patched kernel
aligned patch 	       aligned patch
===============================================================================
real    9m46.784s       9m54.412s                  10m2.450s
user    40m5.715s       40m7.142s                  40m4.273s
sys     2m57.754s       2m58.583s                  3m17.430s
===========================================================

Time duration for kernel compilation ("make -j 8) on the same system, when
kernel is not probed.
=========================
real    9m26.389s
user    40m8.775s
sys     2m7.283s
=========================

Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/kernel/kprobes.c     |   6 +-
 arch/ia64/kernel/kprobes.c    |   6 +-
 arch/powerpc/kernel/kprobes.c |   6 +-
 arch/s390/kernel/kprobes.c    |   6 +-
 arch/sparc64/kernel/kprobes.c |  11 ++--
 arch/x86/kernel/kprobes.c     |   6 +-
 include/linux/kprobes.h       |   7 ++-
 kernel/kprobes.c              | 127 +++++++++++++++++++++++++++++-------------
 8 files changed, 108 insertions(+), 67 deletions(-)

diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 5ee39e10c8d..d28513f14d0 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -296,8 +296,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -337,7 +336,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	}
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
@@ -347,7 +346,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	return (void *)orig_ret_address;
 }
 
-/* Called with kretprobe_lock held. */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 233434f4f88..f07688da947 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -429,8 +429,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 		((struct fnptr *)kretprobe_trampoline)->ip;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -485,7 +484,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
@@ -500,7 +499,6 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	return 1;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 4ba2af12545..de79915452c 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -144,7 +144,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	kcb->kprobe_saved_msr = regs->msr;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -312,8 +311,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -352,7 +350,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->nip = orig_ret_address;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 288ad490a6d..4f82e5b5f87 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -270,7 +270,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 					struct pt_regs *regs)
 {
@@ -377,8 +376,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -417,7 +415,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index f43b5d75535..201a6e547e4 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -478,9 +478,9 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	return 0;
 }
 
-/* Called with kretprobe_lock held.  The value stored in the return
- * address register is actually 2 instructions before where the
- * callee will return to.  Sequences usually look something like this
+/* The value stored in the return address register is actually 2
+ * instructions before where the callee will return to.
+ * Sequences usually look something like this
  *
  *		call	some_function	<--- return register points here
  *		 nop			<--- call delay slot
@@ -512,8 +512,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -553,7 +552,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	regs->tnpc = orig_ret_address + 4;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 43c019f85f0..6c27679ec6a 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -431,7 +431,6 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 		regs->ip = (unsigned long)p->ainsn.insn;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -682,8 +681,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 	/* fixup registers */
 #ifdef CONFIG_X86_64
 	regs->cs = __KERNEL_CS;
@@ -732,7 +730,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 04a3556bdea..0be7795655f 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -157,11 +157,10 @@ struct kretprobe {
 	int nmissed;
 	size_t data_size;
 	struct hlist_head free_instances;
-	struct hlist_head used_instances;
+	spinlock_t lock;
 };
 
 struct kretprobe_instance {
-	struct hlist_node uflist; /* either on free list or used list */
 	struct hlist_node hlist;
 	struct kretprobe *rp;
 	kprobe_opcode_t *ret_addr;
@@ -201,7 +200,6 @@ static inline int init_test_probes(void)
 }
 #endif /* CONFIG_KPROBES_SANITY_TEST */
 
-extern spinlock_t kretprobe_lock;
 extern struct mutex kprobe_mutex;
 extern int arch_prepare_kprobe(struct kprobe *p);
 extern void arch_arm_kprobe(struct kprobe *p);
@@ -214,6 +212,9 @@ extern void kprobes_inc_nmissed_count(struct kprobe *p);
 
 /* Get the kprobe at this addr (if any) - called with preemption disabled */
 struct kprobe *get_kprobe(void *addr);
+void kretprobe_hash_lock(struct task_struct *tsk,
+			 struct hlist_head **head, unsigned long *flags);
+void kretprobe_hash_unlock(struct task_struct *tsk, unsigned long *flags);
 struct hlist_head * kretprobe_inst_table_head(struct task_struct *tsk);
 
 /* kprobe_running() will just return the current_kprobe on this CPU */
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 1485ca8d0e0..cb0b3bde361 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -62,6 +62,7 @@
 	addr = ((kprobe_opcode_t *)(kallsyms_lookup_name(name)))
 #endif
 
+static int kprobes_initialized;
 static struct hlist_head kprobe_table[KPROBE_TABLE_SIZE];
 static struct hlist_head kretprobe_inst_table[KPROBE_TABLE_SIZE];
 
@@ -69,8 +70,15 @@ static struct hlist_head kretprobe_inst_table[KPROBE_TABLE_SIZE];
 static bool kprobe_enabled;
 
 DEFINE_MUTEX(kprobe_mutex);		/* Protects kprobe_table */
-DEFINE_SPINLOCK(kretprobe_lock);	/* Protects kretprobe_inst_table */
 static DEFINE_PER_CPU(struct kprobe *, kprobe_instance) = NULL;
+static struct {
+	spinlock_t lock ____cacheline_aligned;
+} kretprobe_table_locks[KPROBE_TABLE_SIZE];
+
+static spinlock_t *kretprobe_table_lock_ptr(unsigned long hash)
+{
+	return &(kretprobe_table_locks[hash].lock);
+}
 
 /*
  * Normally, functions that we'd want to prohibit kprobes in, are marked
@@ -368,26 +376,53 @@ void __kprobes kprobes_inc_nmissed_count(struct kprobe *p)
 	return;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes recycle_rp_inst(struct kretprobe_instance *ri,
 				struct hlist_head *head)
 {
+	struct kretprobe *rp = ri->rp;
+
 	/* remove rp inst off the rprobe_inst_table */
 	hlist_del(&ri->hlist);
-	if (ri->rp) {
-		/* remove rp inst off the used list */
-		hlist_del(&ri->uflist);
-		/* put rp inst back onto the free list */
-		INIT_HLIST_NODE(&ri->uflist);
-		hlist_add_head(&ri->uflist, &ri->rp->free_instances);
+	INIT_HLIST_NODE(&ri->hlist);
+	if (likely(rp)) {
+		spin_lock(&rp->lock);
+		hlist_add_head(&ri->hlist, &rp->free_instances);
+		spin_unlock(&rp->lock);
 	} else
 		/* Unregistering */
 		hlist_add_head(&ri->hlist, head);
 }
 
-struct hlist_head __kprobes *kretprobe_inst_table_head(struct task_struct *tsk)
+void kretprobe_hash_lock(struct task_struct *tsk,
+			 struct hlist_head **head, unsigned long *flags)
+{
+	unsigned long hash = hash_ptr(tsk, KPROBE_HASH_BITS);
+	spinlock_t *hlist_lock;
+
+	*head = &kretprobe_inst_table[hash];
+	hlist_lock = kretprobe_table_lock_ptr(hash);
+	spin_lock_irqsave(hlist_lock, *flags);
+}
+
+void kretprobe_table_lock(unsigned long hash, unsigned long *flags)
 {
-	return &kretprobe_inst_table[hash_ptr(tsk, KPROBE_HASH_BITS)];
+	spinlock_t *hlist_lock = kretprobe_table_lock_ptr(hash);
+	spin_lock_irqsave(hlist_lock, *flags);
+}
+
+void kretprobe_hash_unlock(struct task_struct *tsk, unsigned long *flags)
+{
+	unsigned long hash = hash_ptr(tsk, KPROBE_HASH_BITS);
+	spinlock_t *hlist_lock;
+
+	hlist_lock = kretprobe_table_lock_ptr(hash);
+	spin_unlock_irqrestore(hlist_lock, *flags);
+}
+
+void kretprobe_table_unlock(unsigned long hash, unsigned long *flags)
+{
+	spinlock_t *hlist_lock = kretprobe_table_lock_ptr(hash);
+	spin_unlock_irqrestore(hlist_lock, *flags);
 }
 
 /*
@@ -401,17 +436,21 @@ void __kprobes kprobe_flush_task(struct task_struct *tk)
 	struct kretprobe_instance *ri;
 	struct hlist_head *head, empty_rp;
 	struct hlist_node *node, *tmp;
-	unsigned long flags = 0;
+	unsigned long hash, flags = 0;
 
-	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(tk);
+	if (unlikely(!kprobes_initialized))
+		/* Early boot.  kretprobe_table_locks not yet initialized. */
+		return;
+
+	hash = hash_ptr(tk, KPROBE_HASH_BITS);
+	head = &kretprobe_inst_table[hash];
+	kretprobe_table_lock(hash, &flags);
 	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
 		if (ri->task == tk)
 			recycle_rp_inst(ri, &empty_rp);
 	}
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
-
+	kretprobe_table_unlock(hash, &flags);
+	INIT_HLIST_HEAD(&empty_rp);
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
 		kfree(ri);
@@ -423,24 +462,29 @@ static inline void free_rp_inst(struct kretprobe *rp)
 	struct kretprobe_instance *ri;
 	struct hlist_node *pos, *next;
 
-	hlist_for_each_entry_safe(ri, pos, next, &rp->free_instances, uflist) {
-		hlist_del(&ri->uflist);
+	hlist_for_each_entry_safe(ri, pos, next, &rp->free_instances, hlist) {
+		hlist_del(&ri->hlist);
 		kfree(ri);
 	}
 }
 
 static void __kprobes cleanup_rp_inst(struct kretprobe *rp)
 {
-	unsigned long flags;
+	unsigned long flags, hash;
 	struct kretprobe_instance *ri;
 	struct hlist_node *pos, *next;
+	struct hlist_head *head;
+
 	/* No race here */
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	hlist_for_each_entry_safe(ri, pos, next, &rp->used_instances, uflist) {
-		ri->rp = NULL;
-		hlist_del(&ri->uflist);
+	for (hash = 0; hash < KPROBE_TABLE_SIZE; hash++) {
+		kretprobe_table_lock(hash, &flags);
+		head = &kretprobe_inst_table[hash];
+		hlist_for_each_entry_safe(ri, pos, next, head, hlist) {
+			if (ri->rp == rp)
+				ri->rp = NULL;
+		}
+		kretprobe_table_unlock(hash, &flags);
 	}
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
 	free_rp_inst(rp);
 }
 
@@ -831,32 +875,37 @@ static int __kprobes pre_handler_kretprobe(struct kprobe *p,
 					   struct pt_regs *regs)
 {
 	struct kretprobe *rp = container_of(p, struct kretprobe, kp);
-	unsigned long flags = 0;
+	unsigned long hash, flags = 0;
+	struct kretprobe_instance *ri;
 
 	/*TODO: consider to only swap the RA after the last pre_handler fired */
-	spin_lock_irqsave(&kretprobe_lock, flags);
+	hash = hash_ptr(current, KPROBE_HASH_BITS);
+	spin_lock_irqsave(&rp->lock, flags);
 	if (!hlist_empty(&rp->free_instances)) {
-		struct kretprobe_instance *ri;
-
 		ri = hlist_entry(rp->free_instances.first,
-				 struct kretprobe_instance, uflist);
+				struct kretprobe_instance, hlist);
+		hlist_del(&ri->hlist);
+		spin_unlock_irqrestore(&rp->lock, flags);
+
 		ri->rp = rp;
 		ri->task = current;
 
 		if (rp->entry_handler && rp->entry_handler(ri, regs)) {
-			spin_unlock_irqrestore(&kretprobe_lock, flags);
+			spin_unlock_irqrestore(&rp->lock, flags);
 			return 0;
 		}
 
 		arch_prepare_kretprobe(ri, regs);
 
 		/* XXX(hch): why is there no hlist_move_head? */
-		hlist_del(&ri->uflist);
-		hlist_add_head(&ri->uflist, &ri->rp->used_instances);
-		hlist_add_head(&ri->hlist, kretprobe_inst_table_head(ri->task));
-	} else
+		INIT_HLIST_NODE(&ri->hlist);
+		kretprobe_table_lock(hash, &flags);
+		hlist_add_head(&ri->hlist, &kretprobe_inst_table[hash]);
+		kretprobe_table_unlock(hash, &flags);
+	} else {
 		rp->nmissed++;
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+		spin_unlock_irqrestore(&rp->lock, flags);
+	}
 	return 0;
 }
 
@@ -892,7 +941,7 @@ static int __kprobes __register_kretprobe(struct kretprobe *rp,
 		rp->maxactive = NR_CPUS;
 #endif
 	}
-	INIT_HLIST_HEAD(&rp->used_instances);
+	spin_lock_init(&rp->lock);
 	INIT_HLIST_HEAD(&rp->free_instances);
 	for (i = 0; i < rp->maxactive; i++) {
 		inst = kmalloc(sizeof(struct kretprobe_instance) +
@@ -901,8 +950,8 @@ static int __kprobes __register_kretprobe(struct kretprobe *rp,
 			free_rp_inst(rp);
 			return -ENOMEM;
 		}
-		INIT_HLIST_NODE(&inst->uflist);
-		hlist_add_head(&inst->uflist, &rp->free_instances);
+		INIT_HLIST_NODE(&inst->hlist);
+		hlist_add_head(&inst->hlist, &rp->free_instances);
 	}
 
 	rp->nmissed = 0;
@@ -1009,6 +1058,7 @@ static int __init init_kprobes(void)
 	for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
 		INIT_HLIST_HEAD(&kprobe_table[i]);
 		INIT_HLIST_HEAD(&kretprobe_inst_table[i]);
+		spin_lock_init(&(kretprobe_table_locks[i].lock));
 	}
 
 	/*
@@ -1050,6 +1100,7 @@ static int __init init_kprobes(void)
 	err = arch_init_kprobes();
 	if (!err)
 		err = register_die_notifier(&kprobe_exceptions_nb);
+	kprobes_initialized = (err == 0);
 
 	if (!err)
 		init_test_probes();
-- 
cgit v1.2.3


From 8b6dd986823a8d92ed9f54baa5cef8604d9d9d44 Mon Sep 17 00:00:00 2001
From: Abhishek Sagar <sagar.abhishek@gmail.com>
Date: Fri, 25 Jul 2008 01:46:05 -0700
Subject: kprobes: remove redundant config check

I noticed that there's a CONFIG_KPROBES check inside kernel/kprobes.c,
which is redundant.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/kprobes.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index cb0b3bde361..75bc2cd9ebc 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1337,13 +1337,8 @@ EXPORT_SYMBOL_GPL(register_jprobe);
 EXPORT_SYMBOL_GPL(unregister_jprobe);
 EXPORT_SYMBOL_GPL(register_jprobes);
 EXPORT_SYMBOL_GPL(unregister_jprobes);
-#ifdef CONFIG_KPROBES
 EXPORT_SYMBOL_GPL(jprobe_return);
-#endif
-
-#ifdef CONFIG_KPROBES
 EXPORT_SYMBOL_GPL(register_kretprobe);
 EXPORT_SYMBOL_GPL(unregister_kretprobe);
 EXPORT_SYMBOL_GPL(register_kretprobes);
 EXPORT_SYMBOL_GPL(unregister_kretprobes);
-#endif
-- 
cgit v1.2.3


From d8f388d8dc8d4f36539dd37c1fff62cc404ea0fc Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Fri, 25 Jul 2008 01:46:07 -0700
Subject: gpio: sysfs interface

This adds a simple sysfs interface for GPIOs.

    /sys/class/gpio
    	/export ... asks the kernel to export a GPIO to userspace
    	/unexport ... to return a GPIO to the kernel
        /gpioN ... for each exported GPIO #N
	    /value ... always readable, writes fail for input GPIOs
	    /direction ... r/w as: in, out (default low); write high, low
	/gpiochipN ... for each gpiochip; #N is its first GPIO
	    /base ... (r/o) same as N
	    /label ... (r/o) descriptive, not necessarily unique
	    /ngpio ... (r/o) number of GPIOs; numbered N .. N+(ngpio - 1)

GPIOs claimed by kernel code may be exported by its owner using a new
gpio_export() call, which should be most useful for driver debugging.
Such exports may optionally be done without a "direction" attribute.

Userspace may ask to take over a GPIO by writing to a sysfs control file,
helping to cope with incomplete board support or other "one-off"
requirements that don't merit full kernel support:

  echo 23 > /sys/class/gpio/export
	... will gpio_request(23, "sysfs") and gpio_export(23);
	use /sys/class/gpio/gpio-23/direction to (re)configure it,
	when that GPIO can be used as both input and output.
  echo 23 > /sys/class/gpio/unexport
	... will gpio_free(23), when it was exported as above

The extra D-space footprint is a few hundred bytes, except for the sysfs
resources associated with each exported GPIO.  The additional I-space
footprint is about two thirds of the current size of gpiolib (!).  Since
no /dev node creation is involved, no "udev" support is needed.

Related changes:

  * This adds a device pointer to "struct gpio_chip".  When GPIO
    providers initialize that, sysfs gpio class devices become children of
    that device instead of being "virtual" devices.

  * The (few) gpio_chip providers which have such a device node have
    been updated.

  * Some gpio_chip drivers also needed to update their module "owner"
    field ...  for which missing kerneldoc was added.

  * Some gpio_chips don't support input GPIOs.  Those GPIOs are now
    flagged appropriately when the chip is registered.

Based on previous patches, and discussion both on and off LKML.

A Documentation/ABI/testing/sysfs-gpio update is ready to submit once this
merges to mainline.

[akpm@linux-foundation.org: a few maintenance build fixes]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/gpio.txt       | 123 +++++++++-
 arch/arm/plat-omap/gpio.c    |   3 +
 arch/avr32/mach-at32ap/pio.c |   2 +
 drivers/gpio/Kconfig         |  15 ++
 drivers/gpio/gpiolib.c       | 536 +++++++++++++++++++++++++++++++++++++++++--
 drivers/gpio/mcp23s08.c      |   1 +
 drivers/gpio/pca953x.c       |   1 +
 drivers/gpio/pcf857x.c       |   1 +
 drivers/i2c/chips/tps65010.c |   2 +
 drivers/mfd/htc-egpio.c      |   2 +
 include/asm-generic/gpio.h   |  33 ++-
 include/linux/gpio.h         |  13 ++
 12 files changed, 712 insertions(+), 20 deletions(-)

diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index c35ca9e40d4..8b69811a964 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -347,15 +347,12 @@ necessarily be nonportable.
 Dynamic definition of GPIOs is not currently standard; for example, as
 a side effect of configuring an add-on board with some GPIO expanders.
 
-These calls are purely for kernel space, but a userspace API could be built
-on top of them.
-
 
 GPIO implementor's framework (OPTIONAL)
 =======================================
 As noted earlier, there is an optional implementation framework making it
 easier for platforms to support different kinds of GPIO controller using
-the same programming interface.
+the same programming interface.  This framework is called "gpiolib".
 
 As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file
 will be found there.  That will list all the controllers registered through
@@ -439,4 +436,120 @@ becomes available.  That may mean the device should not be registered until
 calls for that GPIO can work.  One way to address such dependencies is for
 such gpio_chip controllers to provide setup() and teardown() callbacks to
 board specific code; those board specific callbacks would register devices
-once all the necessary resources are available.
+once all the necessary resources are available, and remove them later when
+the GPIO controller device becomes unavailable.
+
+
+Sysfs Interface for Userspace (OPTIONAL)
+========================================
+Platforms which use the "gpiolib" implementors framework may choose to
+configure a sysfs user interface to GPIOs.  This is different from the
+debugfs interface, since it provides control over GPIO direction and
+value instead of just showing a gpio state summary.  Plus, it could be
+present on production systems without debugging support.
+
+Given approprate hardware documentation for the system, userspace could
+know for example that GPIO #23 controls the write protect line used to
+protect boot loader segments in flash memory.  System upgrade procedures
+may need to temporarily remove that protection, first importing a GPIO,
+then changing its output state, then updating the code before re-enabling
+the write protection.  In normal use, GPIO #23 would never be touched,
+and the kernel would have no need to know about it.
+
+Again depending on appropriate hardware documentation, on some systems
+userspace GPIO can be used to determine system configuration data that
+standard kernels won't know about.  And for some tasks, simple userspace
+GPIO drivers could be all that the system really needs.
+
+Note that standard kernel drivers exist for common "LEDs and Buttons"
+GPIO tasks:  "leds-gpio" and "gpio_keys", respectively.  Use those
+instead of talking directly to the GPIOs; they integrate with kernel
+frameworks better than your userspace code could.
+
+
+Paths in Sysfs
+--------------
+There are three kinds of entry in /sys/class/gpio:
+
+   -	Control interfaces used to get userspace control over GPIOs;
+
+   -	GPIOs themselves; and
+
+   -	GPIO controllers ("gpio_chip" instances).
+
+That's in addition to standard files including the "device" symlink.
+
+The control interfaces are write-only:
+
+    /sys/class/gpio/
+
+    	"export" ... Userspace may ask the kernel to export control of
+		a GPIO to userspace by writing its number to this file.
+
+		Example:  "echo 19 > export" will create a "gpio19" node
+		for GPIO #19, if that's not requested by kernel code.
+
+    	"unexport" ... Reverses the effect of exporting to userspace.
+
+		Example:  "echo 19 > unexport" will remove a "gpio19"
+		node exported using the "export" file.
+
+GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
+and have the following read/write attributes:
+
+    /sys/class/gpio/gpioN/
+
+	"direction" ... reads as either "in" or "out".  This value may
+		normally be written.  Writing as "out" defaults to
+		initializing the value as low.  To ensure glitch free
+		operation, values "low" and "high" may be written to
+		configure the GPIO as an output with that initial value.
+
+		Note that this attribute *will not exist* if the kernel
+		doesn't support changing the direction of a GPIO, or
+		it was exported by kernel code that didn't explicitly
+		allow userspace to reconfigure this GPIO's direction.
+
+	"value" ... reads as either 0 (low) or 1 (high).  If the GPIO
+		is configured as an output, this value may be written;
+		any nonzero value is treated as high.
+
+GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the
+controller implementing GPIOs starting at #42) and have the following
+read-only attributes:
+
+    /sys/class/gpio/gpiochipN/
+
+    	"base" ... same as N, the first GPIO managed by this chip
+
+    	"label" ... provided for diagnostics (not always unique)
+
+    	"ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
+
+Board documentation should in most cases cover what GPIOs are used for
+what purposes.  However, those numbers are not always stable; GPIOs on
+a daughtercard might be different depending on the base board being used,
+or other cards in the stack.  In such cases, you may need to use the
+gpiochip nodes (possibly in conjunction with schematics) to determine
+the correct GPIO number to use for a given signal.
+
+
+Exporting from Kernel code
+--------------------------
+Kernel code can explicitly manage exports of GPIOs which have already been
+requested using gpio_request():
+
+	/* export the GPIO to userspace */
+	int gpio_export(unsigned gpio, bool direction_may_change);
+
+	/* reverse gpio_export() */
+	void gpio_unexport();
+
+After a kernel driver requests a GPIO, it may only be made available in
+the sysfs interface by gpio_export().  The driver can control whether the
+signal direction may change.  This helps drivers prevent userspace code
+from accidentally clobbering important system state.
+
+This explicit exporting can help with debugging (by making some kinds
+of experiments easier), or can provide an always-there interface that's
+suitable for documenting as part of a board support package.
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 1903a3491ee..d8e9c2c3f0f 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1488,6 +1488,9 @@ static int __init _omap_gpio_init(void)
 		bank->chip.set = gpio_set;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP1
+			bank->chip.dev = &omap_mpuio_device.dev;
+#endif
 			bank->chip.base = OMAP_MPUIO(0);
 		} else {
 			bank->chip.label = "gpio";
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 60da03ba711..296294f8ed8 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -360,6 +360,8 @@ static int __init pio_probe(struct platform_device *pdev)
 	pio->chip.label = pio->name;
 	pio->chip.base = pdev->id * 32;
 	pio->chip.ngpio = 32;
+	pio->chip.dev = &pdev->dev;
+	pio->chip.owner = THIS_MODULE;
 
 	pio->chip.direction_input = direction_input;
 	pio->chip.get = gpio_get;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index fced1909cbb..6ec0e35b98e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -23,6 +23,21 @@ config DEBUG_GPIO
 	  slower.  The diagnostics help catch the type of setup errors
 	  that are most common when setting up new platforms or boards.
 
+config GPIO_SYSFS
+	bool "/sys/class/gpio/... (sysfs interface)"
+	depends on SYSFS && EXPERIMENTAL
+	help
+	  Say Y here to add a sysfs interface for GPIOs.
+
+	  This is mostly useful to work around omissions in a system's
+	  kernel support.  Those are common in custom and semicustom
+	  hardware assembled using standard kernels with a minimum of
+	  custom patches.  In those cases, userspace code may import
+	  a given GPIO from the kernel, if no kernel driver requested it.
+
+	  Kernel drivers may also request that a particular GPIO be
+	  exported to userspace; this can be useful when debugging.
+
 # put expanders in the right section, in alphabetical order
 
 comment "I2C GPIO expanders:"
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index beaf6b3a37d..8d2940517c9 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2,8 +2,11 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
-
-#include <asm/gpio.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/gpio.h>
 
 
 /* Optional implementation infrastructure for GPIO interfaces.
@@ -44,6 +47,8 @@ struct gpio_desc {
 #define FLAG_REQUESTED	0
 #define FLAG_IS_OUT	1
 #define FLAG_RESERVED	2
+#define FLAG_EXPORT	3	/* protected by sysfs_lock */
+#define FLAG_SYSFS	4	/* exported via /sys/class/gpio/control */
 
 #ifdef CONFIG_DEBUG_FS
 	const char		*label;
@@ -151,6 +156,482 @@ err:
 	return ret;
 }
 
+#ifdef CONFIG_GPIO_SYSFS
+
+/* lock protects against unexport_gpio() being called while
+ * sysfs files are active.
+ */
+static DEFINE_MUTEX(sysfs_lock);
+
+/*
+ * /sys/class/gpio/gpioN... only for GPIOs that are exported
+ *   /direction
+ *      * MAY BE OMITTED if kernel won't allow direction changes
+ *      * is read/write as "in" or "out"
+ *      * may also be written as "high" or "low", initializing
+ *        output value as specified ("out" implies "low")
+ *   /value
+ *      * always readable, subject to hardware behavior
+ *      * may be writable, as zero/nonzero
+ *
+ * REVISIT there will likely be an attribute for configuring async
+ * notifications, e.g. to specify polling interval or IRQ trigger type
+ * that would for example trigger a poll() on the "value".
+ */
+
+static ssize_t gpio_direction_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	ssize_t			status;
+
+	mutex_lock(&sysfs_lock);
+
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		status = -EIO;
+	else
+		status = sprintf(buf, "%s\n",
+			test_bit(FLAG_IS_OUT, &desc->flags)
+				? "out" : "in");
+
+	mutex_unlock(&sysfs_lock);
+	return status;
+}
+
+static ssize_t gpio_direction_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	unsigned		gpio = desc - gpio_desc;
+	ssize_t			status;
+
+	mutex_lock(&sysfs_lock);
+
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		status = -EIO;
+	else if (sysfs_streq(buf, "high"))
+		status = gpio_direction_output(gpio, 1);
+	else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low"))
+		status = gpio_direction_output(gpio, 0);
+	else if (sysfs_streq(buf, "in"))
+		status = gpio_direction_input(gpio);
+	else
+		status = -EINVAL;
+
+	mutex_unlock(&sysfs_lock);
+	return status ? : size;
+}
+
+static const DEVICE_ATTR(direction, 0644,
+		gpio_direction_show, gpio_direction_store);
+
+static ssize_t gpio_value_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	unsigned		gpio = desc - gpio_desc;
+	ssize_t			status;
+
+	mutex_lock(&sysfs_lock);
+
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		status = -EIO;
+	else
+		status = sprintf(buf, "%d\n", gpio_get_value_cansleep(gpio));
+
+	mutex_unlock(&sysfs_lock);
+	return status;
+}
+
+static ssize_t gpio_value_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	unsigned		gpio = desc - gpio_desc;
+	ssize_t			status;
+
+	mutex_lock(&sysfs_lock);
+
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		status = -EIO;
+	else if (!test_bit(FLAG_IS_OUT, &desc->flags))
+		status = -EPERM;
+	else {
+		long		value;
+
+		status = strict_strtol(buf, 0, &value);
+		if (status == 0) {
+			gpio_set_value_cansleep(gpio, value != 0);
+			status = size;
+		}
+	}
+
+	mutex_unlock(&sysfs_lock);
+	return status;
+}
+
+static /*const*/ DEVICE_ATTR(value, 0644,
+		gpio_value_show, gpio_value_store);
+
+static const struct attribute *gpio_attrs[] = {
+	&dev_attr_direction.attr,
+	&dev_attr_value.attr,
+	NULL,
+};
+
+static const struct attribute_group gpio_attr_group = {
+	.attrs = (struct attribute **) gpio_attrs,
+};
+
+/*
+ * /sys/class/gpio/gpiochipN/
+ *   /base ... matching gpio_chip.base (N)
+ *   /label ... matching gpio_chip.label
+ *   /ngpio ... matching gpio_chip.ngpio
+ */
+
+static ssize_t chip_base_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	const struct gpio_chip	*chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", chip->base);
+}
+static DEVICE_ATTR(base, 0444, chip_base_show, NULL);
+
+static ssize_t chip_label_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	const struct gpio_chip	*chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", chip->label ? : "");
+}
+static DEVICE_ATTR(label, 0444, chip_label_show, NULL);
+
+static ssize_t chip_ngpio_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	const struct gpio_chip	*chip = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", chip->ngpio);
+}
+static DEVICE_ATTR(ngpio, 0444, chip_ngpio_show, NULL);
+
+static const struct attribute *gpiochip_attrs[] = {
+	&dev_attr_base.attr,
+	&dev_attr_label.attr,
+	&dev_attr_ngpio.attr,
+	NULL,
+};
+
+static const struct attribute_group gpiochip_attr_group = {
+	.attrs = (struct attribute **) gpiochip_attrs,
+};
+
+/*
+ * /sys/class/gpio/export ... write-only
+ *	integer N ... number of GPIO to export (full access)
+ * /sys/class/gpio/unexport ... write-only
+ *	integer N ... number of GPIO to unexport
+ */
+static ssize_t export_store(struct class *class, const char *buf, size_t len)
+{
+	long	gpio;
+	int	status;
+
+	status = strict_strtol(buf, 0, &gpio);
+	if (status < 0)
+		goto done;
+
+	/* No extra locking here; FLAG_SYSFS just signifies that the
+	 * request and export were done by on behalf of userspace, so
+	 * they may be undone on its behalf too.
+	 */
+
+	status = gpio_request(gpio, "sysfs");
+	if (status < 0)
+		goto done;
+
+	status = gpio_export(gpio, true);
+	if (status < 0)
+		gpio_free(gpio);
+	else
+		set_bit(FLAG_SYSFS, &gpio_desc[gpio].flags);
+
+done:
+	if (status)
+		pr_debug("%s: status %d\n", __func__, status);
+	return status ? : len;
+}
+
+static ssize_t unexport_store(struct class *class, const char *buf, size_t len)
+{
+	long	gpio;
+	int	status;
+
+	status = strict_strtol(buf, 0, &gpio);
+	if (status < 0)
+		goto done;
+
+	status = -EINVAL;
+
+	/* reject bogus commands (gpio_unexport ignores them) */
+	if (!gpio_is_valid(gpio))
+		goto done;
+
+	/* No extra locking here; FLAG_SYSFS just signifies that the
+	 * request and export were done by on behalf of userspace, so
+	 * they may be undone on its behalf too.
+	 */
+	if (test_and_clear_bit(FLAG_SYSFS, &gpio_desc[gpio].flags)) {
+		status = 0;
+		gpio_free(gpio);
+	}
+done:
+	if (status)
+		pr_debug("%s: status %d\n", __func__, status);
+	return status ? : len;
+}
+
+static struct class_attribute gpio_class_attrs[] = {
+	__ATTR(export, 0200, NULL, export_store),
+	__ATTR(unexport, 0200, NULL, unexport_store),
+	__ATTR_NULL,
+};
+
+static struct class gpio_class = {
+	.name =		"gpio",
+	.owner =	THIS_MODULE,
+
+	.class_attrs =	gpio_class_attrs,
+};
+
+
+/**
+ * gpio_export - export a GPIO through sysfs
+ * @gpio: gpio to make available, already requested
+ * @direction_may_change: true if userspace may change gpio direction
+ * Context: arch_initcall or later
+ *
+ * When drivers want to make a GPIO accessible to userspace after they
+ * have requested it -- perhaps while debugging, or as part of their
+ * public interface -- they may use this routine.  If the GPIO can
+ * change direction (some can't) and the caller allows it, userspace
+ * will see "direction" sysfs attribute which may be used to change
+ * the gpio's direction.  A "value" attribute will always be provided.
+ *
+ * Returns zero on success, else an error.
+ */
+int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	unsigned long		flags;
+	struct gpio_desc	*desc;
+	int			status = -EINVAL;
+
+	/* can't export until sysfs is available ... */
+	if (!gpio_class.p) {
+		pr_debug("%s: called too early!\n", __func__);
+		return -ENOENT;
+	}
+
+	if (!gpio_is_valid(gpio))
+		goto done;
+
+	mutex_lock(&sysfs_lock);
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	desc = &gpio_desc[gpio];
+	if (test_bit(FLAG_REQUESTED, &desc->flags)
+			&& !test_bit(FLAG_EXPORT, &desc->flags)) {
+		status = 0;
+		if (!desc->chip->direction_input
+				|| !desc->chip->direction_output)
+			direction_may_change = false;
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	if (status == 0) {
+		struct device	*dev;
+
+		dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
+					desc, "gpio%d", gpio);
+		if (dev) {
+			if (direction_may_change)
+				status = sysfs_create_group(&dev->kobj,
+						&gpio_attr_group);
+			else
+				status = device_create_file(dev,
+						&dev_attr_value);
+			if (status != 0)
+				device_unregister(dev);
+		} else
+			status = -ENODEV;
+		if (status == 0)
+			set_bit(FLAG_EXPORT, &desc->flags);
+	}
+
+	mutex_unlock(&sysfs_lock);
+
+done:
+	if (status)
+		pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(gpio_export);
+
+static int match_export(struct device *dev, void *data)
+{
+	return dev_get_drvdata(dev) == data;
+}
+
+/**
+ * gpio_unexport - reverse effect of gpio_export()
+ * @gpio: gpio to make unavailable
+ *
+ * This is implicit on gpio_free().
+ */
+void gpio_unexport(unsigned gpio)
+{
+	struct gpio_desc	*desc;
+	int			status = -EINVAL;
+
+	if (!gpio_is_valid(gpio))
+		goto done;
+
+	mutex_lock(&sysfs_lock);
+
+	desc = &gpio_desc[gpio];
+	if (test_bit(FLAG_EXPORT, &desc->flags)) {
+		struct device	*dev = NULL;
+
+		dev = class_find_device(&gpio_class, NULL, desc, match_export);
+		if (dev) {
+			clear_bit(FLAG_EXPORT, &desc->flags);
+			put_device(dev);
+			device_unregister(dev);
+			status = 0;
+		} else
+			status = -ENODEV;
+	}
+
+	mutex_unlock(&sysfs_lock);
+done:
+	if (status)
+		pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
+}
+EXPORT_SYMBOL_GPL(gpio_unexport);
+
+static int gpiochip_export(struct gpio_chip *chip)
+{
+	int		status;
+	struct device	*dev;
+
+	/* Many systems register gpio chips for SOC support very early,
+	 * before driver model support is available.  In those cases we
+	 * export this later, in gpiolib_sysfs_init() ... here we just
+	 * verify that _some_ field of gpio_class got initialized.
+	 */
+	if (!gpio_class.p)
+		return 0;
+
+	/* use chip->base for the ID; it's already known to be unique */
+	mutex_lock(&sysfs_lock);
+	dev = device_create(&gpio_class, chip->dev, MKDEV(0, 0), chip,
+				"gpiochip%d", chip->base);
+	if (dev) {
+		status = sysfs_create_group(&dev->kobj,
+				&gpiochip_attr_group);
+	} else
+		status = -ENODEV;
+	chip->exported = (status == 0);
+	mutex_unlock(&sysfs_lock);
+
+	if (status) {
+		unsigned long	flags;
+		unsigned	gpio;
+
+		spin_lock_irqsave(&gpio_lock, flags);
+		gpio = chip->base;
+		while (gpio_desc[gpio].chip == chip)
+			gpio_desc[gpio++].chip = NULL;
+		spin_unlock_irqrestore(&gpio_lock, flags);
+
+		pr_debug("%s: chip %s status %d\n", __func__,
+				chip->label, status);
+	}
+
+	return status;
+}
+
+static void gpiochip_unexport(struct gpio_chip *chip)
+{
+	int			status;
+	struct device		*dev;
+
+	mutex_lock(&sysfs_lock);
+	dev = class_find_device(&gpio_class, NULL, chip, match_export);
+	if (dev) {
+		put_device(dev);
+		device_unregister(dev);
+		chip->exported = 0;
+		status = 0;
+	} else
+		status = -ENODEV;
+	mutex_unlock(&sysfs_lock);
+
+	if (status)
+		pr_debug("%s: chip %s status %d\n", __func__,
+				chip->label, status);
+}
+
+static int __init gpiolib_sysfs_init(void)
+{
+	int		status;
+	unsigned long	flags;
+	unsigned	gpio;
+
+	status = class_register(&gpio_class);
+	if (status < 0)
+		return status;
+
+	/* Scan and register the gpio_chips which registered very
+	 * early (e.g. before the class_register above was called).
+	 *
+	 * We run before arch_initcall() so chip->dev nodes can have
+	 * registered, and so arch_initcall() can always gpio_export().
+	 */
+	spin_lock_irqsave(&gpio_lock, flags);
+	for (gpio = 0; gpio < ARCH_NR_GPIOS; gpio++) {
+		struct gpio_chip	*chip;
+
+		chip = gpio_desc[gpio].chip;
+		if (!chip || chip->exported)
+			continue;
+
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		status = gpiochip_export(chip);
+		spin_lock_irqsave(&gpio_lock, flags);
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+
+	return status;
+}
+postcore_initcall(gpiolib_sysfs_init);
+
+#else
+static inline int gpiochip_export(struct gpio_chip *chip)
+{
+	return 0;
+}
+
+static inline void gpiochip_unexport(struct gpio_chip *chip)
+{
+}
+
+#endif /* CONFIG_GPIO_SYSFS */
+
 /**
  * gpiochip_add() - register a gpio_chip
  * @chip: the chip to register, with chip->base initialized
@@ -160,6 +641,11 @@ err:
  * because the chip->base is invalid or already associated with a
  * different chip.  Otherwise it returns zero as a success code.
  *
+ * When gpiochip_add() is called very early during boot, so that GPIOs
+ * can be freely used, the chip->dev device must be registered before
+ * the gpio framework's arch_initcall().  Otherwise sysfs initialization
+ * for GPIOs will fail rudely.
+ *
  * If chip->base is negative, this requests dynamic assignment of
  * a range of valid GPIOs.
  */
@@ -182,7 +668,7 @@ int gpiochip_add(struct gpio_chip *chip)
 		base = gpiochip_find_base(chip->ngpio);
 		if (base < 0) {
 			status = base;
-			goto fail_unlock;
+			goto unlock;
 		}
 		chip->base = base;
 	}
@@ -197,12 +683,23 @@ int gpiochip_add(struct gpio_chip *chip)
 	if (status == 0) {
 		for (id = base; id < base + chip->ngpio; id++) {
 			gpio_desc[id].chip = chip;
-			gpio_desc[id].flags = 0;
+
+			/* REVISIT:  most hardware initializes GPIOs as
+			 * inputs (often with pullups enabled) so power
+			 * usage is minimized.  Linux code should set the
+			 * gpio direction first thing; but until it does,
+			 * we may expose the wrong direction in sysfs.
+			 */
+			gpio_desc[id].flags = !chip->direction_input
+				? (1 << FLAG_IS_OUT)
+				: 0;
 		}
 	}
 
-fail_unlock:
+unlock:
 	spin_unlock_irqrestore(&gpio_lock, flags);
+	if (status == 0)
+		status = gpiochip_export(chip);
 fail:
 	/* failures here can mean systems won't boot... */
 	if (status)
@@ -239,6 +736,10 @@ int gpiochip_remove(struct gpio_chip *chip)
 	}
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	if (status == 0)
+		gpiochip_unexport(chip);
+
 	return status;
 }
 EXPORT_SYMBOL_GPL(gpiochip_remove);
@@ -296,6 +797,8 @@ void gpio_free(unsigned gpio)
 		return;
 	}
 
+	gpio_unexport(gpio);
+
 	spin_lock_irqsave(&gpio_lock, flags);
 
 	desc = &gpio_desc[gpio];
@@ -534,10 +1037,6 @@ EXPORT_SYMBOL_GPL(gpio_set_value_cansleep);
 
 #ifdef CONFIG_DEBUG_FS
 
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-
 static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	unsigned		i;
@@ -614,17 +1113,28 @@ static int gpiolib_show(struct seq_file *s, void *unused)
 	/* REVISIT this isn't locked against gpio_chip removal ... */
 
 	for (gpio = 0; gpio_is_valid(gpio); gpio++) {
+		struct device *dev;
+
 		if (chip == gpio_desc[gpio].chip)
 			continue;
 		chip = gpio_desc[gpio].chip;
 		if (!chip)
 			continue;
 
-		seq_printf(s, "%sGPIOs %d-%d, %s%s:\n",
+		seq_printf(s, "%sGPIOs %d-%d",
 				started ? "\n" : "",
-				chip->base, chip->base + chip->ngpio - 1,
-				chip->label ? : "generic",
-				chip->can_sleep ? ", can sleep" : "");
+				chip->base, chip->base + chip->ngpio - 1);
+		dev = chip->dev;
+		if (dev)
+			seq_printf(s, ", %s/%s",
+				dev->bus ? dev->bus->name : "no-bus",
+				dev->bus_id);
+		if (chip->label)
+			seq_printf(s, ", %s", chip->label);
+		if (chip->can_sleep)
+			seq_printf(s, ", can sleep");
+		seq_printf(s, ":\n");
+
 		started = 1;
 		if (chip->dbg_show)
 			chip->dbg_show(s, chip);
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index 7f92fdd5f0e..7efd7d3a81f 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -239,6 +239,7 @@ static int mcp23s08_probe(struct spi_device *spi)
 	mcp->chip.base = pdata->base;
 	mcp->chip.ngpio = 8;
 	mcp->chip.can_sleep = 1;
+	mcp->chip.dev = &spi->dev;
 	mcp->chip.owner = THIS_MODULE;
 
 	spi_set_drvdata(spi, mcp);
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index a380730b61a..cc8468692ae 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -188,6 +188,7 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
 	gc->base = chip->gpio_start;
 	gc->ngpio = gpios;
 	gc->label = chip->client->name;
+	gc->dev = &chip->client->dev;
 	gc->owner = THIS_MODULE;
 }
 
diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
index d25d356c4f2..fc9c6ae739e 100644
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
@@ -200,6 +200,7 @@ static int pcf857x_probe(struct i2c_client *client,
 
 	gpio->chip.base = pdata->gpio_base;
 	gpio->chip.can_sleep = 1;
+	gpio->chip.dev = &client->dev;
 	gpio->chip.owner = THIS_MODULE;
 
 	/* NOTE:  the OnSemi jlc1562b is also largely compatible with
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 85949685191..cf02e8fceb4 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -636,6 +636,8 @@ static int tps65010_probe(struct i2c_client *client,
 		tps->outmask = board->outmask;
 
 		tps->chip.label = client->name;
+		tps->chip.dev = &client->dev;
+		tps->chip.owner = THIS_MODULE;
 
 		tps->chip.set = tps65010_gpio_set;
 		tps->chip.direction_output = tps65010_output;
diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c
index 8872cc07751..6be43172dc6 100644
--- a/drivers/mfd/htc-egpio.c
+++ b/drivers/mfd/htc-egpio.c
@@ -318,6 +318,8 @@ static int __init egpio_probe(struct platform_device *pdev)
 		ei->chip[i].dev = &(pdev->dev);
 		chip = &(ei->chip[i].chip);
 		chip->label           = "htc-egpio";
+		chip->dev             = &pdev->dev;
+		chip->owner           = THIS_MODULE;
 		chip->get             = egpio_get;
 		chip->set             = egpio_set;
 		chip->direction_input = egpio_direction_input;
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 6be061d09da..1beff5166e5 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -32,6 +32,8 @@ struct module;
 /**
  * struct gpio_chip - abstract a GPIO controller
  * @label: for diagnostics
+ * @dev: optional device providing the GPIOs
+ * @owner: helps prevent removal of modules exporting active GPIOs
  * @direction_input: configures signal "offset" as input, or returns error
  * @get: returns value for signal "offset"; for output signals this
  *	returns either the value actually sensed, or zero
@@ -59,6 +61,7 @@ struct module;
  */
 struct gpio_chip {
 	char			*label;
+	struct device		*dev;
 	struct module		*owner;
 
 	int			(*direction_input)(struct gpio_chip *chip,
@@ -74,6 +77,7 @@ struct gpio_chip {
 	int			base;
 	u16			ngpio;
 	unsigned		can_sleep:1;
+	unsigned		exported:1;
 };
 
 extern const char *gpiochip_is_requested(struct gpio_chip *chip,
@@ -108,7 +112,18 @@ extern void __gpio_set_value(unsigned gpio, int value);
 extern int __gpio_cansleep(unsigned gpio);
 
 
-#else
+#ifdef CONFIG_GPIO_SYSFS
+
+/*
+ * A sysfs interface can be exported by individual drivers if they want,
+ * but more typically is configured entirely from userspace.
+ */
+extern int gpio_export(unsigned gpio, bool direction_may_change);
+extern void gpio_unexport(unsigned gpio);
+
+#endif	/* CONFIG_GPIO_SYSFS */
+
+#else	/* !CONFIG_HAVE_GPIO_LIB */
 
 static inline int gpio_is_valid(int number)
 {
@@ -137,6 +152,20 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
 	gpio_set_value(gpio, value);
 }
 
-#endif
+#endif /* !CONFIG_HAVE_GPIO_LIB */
+
+#ifndef CONFIG_GPIO_SYSFS
+
+/* sysfs support is only available with gpiolib, where it's optional */
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+#endif	/* CONFIG_GPIO_SYSFS */
 
 #endif /* _ASM_GENERIC_GPIO_H */
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 98be6c5762b..730a20b8357 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -79,6 +79,19 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
 	WARN_ON(1);
 }
 
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	/* GPIO can never have been requested or set as {in,out}put */
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+	/* GPIO can never have been exported */
+	WARN_ON(1);
+}
+
 static inline int gpio_to_irq(unsigned gpio)
 {
 	/* GPIO can never have been requested or set as input */
-- 
cgit v1.2.3


From 8f1cc3b10e6ee0c5c7c8ed27f8771c4f252b4862 Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Fri, 25 Jul 2008 01:46:09 -0700
Subject: gpio: mcp23s08 handles multiple chips per chipselect

Teach the mcp23s08 driver about a curious feature of these chips: up to
four of them can share the same chipselect, with the SPI signals wired in
parallel, by matching two bits in the first protocol byte against two
address lines on the chip.

This is handled by three software changes:

  * Platform data now holds an array of per-chip structs, not
    just one chip's address and pullup configuration.

  * Probe() and remove() now use another level of structure,
    wrapping an instance of the original structure for each
    mcp23s08 chip sharing that chipselect.

  * The HAEN bit is set, so that the hardware address bits can no
    longer be ignored (boot firmware may not have enabled them).

The "one struct per chip" preserves the guts of the current code,
but platform_data will need minor changes.

    OLD:
	/* incorrect "slave" ID may not have mattered */
	.slave = 3,
	.pullups = BIT(3) | BIT(1) | BIT(0),

    NEW:
	/* slave address _must_ match chip's wiring */
	.chip[3] = {
		.is_present = true,
		.pullups = BIT(3) | BIT(1) | BIT(0),
	},

There's no change in how things _behave_ for spi_device nodes with a
single mcp23s08 chip.  New multi-chip configurations assign GPIOs in
sequence, without holes.  The spi_device just resembles a bigger
controller, but internally it has multiple gpio_chip instances.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/gpio/mcp23s08.c      | 133 +++++++++++++++++++++++++++++++++----------
 include/linux/spi/mcp23s08.h |  25 +++++---
 2 files changed, 118 insertions(+), 40 deletions(-)

diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index 7efd7d3a81f..8a1b405fefd 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -40,15 +40,26 @@ struct mcp23s08 {
 	struct spi_device	*spi;
 	u8			addr;
 
+	u8			cache[11];
 	/* lock protects the cached values */
 	struct mutex		lock;
-	u8			cache[11];
 
 	struct gpio_chip	chip;
 
 	struct work_struct	work;
 };
 
+/* A given spi_device can represent up to four mcp23s08 chips
+ * sharing the same chipselect but using different addresses
+ * (e.g. chips #0 and #3 might be populated, but not #1 or $2).
+ * Driver data holds all the per-chip data.
+ */
+struct mcp23s08_driver_data {
+	unsigned		ngpio;
+	struct mcp23s08		*mcp[4];
+	struct mcp23s08		chip[];
+};
+
 static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
 {
 	u8	tx[2], rx[1];
@@ -208,25 +219,18 @@ done:
 
 /*----------------------------------------------------------------------*/
 
-static int mcp23s08_probe(struct spi_device *spi)
+static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr,
+		unsigned base, unsigned pullups)
 {
-	struct mcp23s08			*mcp;
-	struct mcp23s08_platform_data	*pdata;
+	struct mcp23s08_driver_data	*data = spi_get_drvdata(spi);
+	struct mcp23s08			*mcp = data->mcp[addr];
 	int				status;
 	int				do_update = 0;
 
-	pdata = spi->dev.platform_data;
-	if (!pdata || pdata->slave > 3 || !pdata->base)
-		return -ENODEV;
-
-	mcp = kzalloc(sizeof *mcp, GFP_KERNEL);
-	if (!mcp)
-		return -ENOMEM;
-
 	mutex_init(&mcp->lock);
 
 	mcp->spi = spi;
-	mcp->addr = 0x40 | (pdata->slave << 1);
+	mcp->addr = 0x40 | (addr << 1);
 
 	mcp->chip.label = "mcp23s08",
 
@@ -236,27 +240,28 @@ static int mcp23s08_probe(struct spi_device *spi)
 	mcp->chip.set = mcp23s08_set;
 	mcp->chip.dbg_show = mcp23s08_dbg_show;
 
-	mcp->chip.base = pdata->base;
+	mcp->chip.base = base;
 	mcp->chip.ngpio = 8;
 	mcp->chip.can_sleep = 1;
 	mcp->chip.dev = &spi->dev;
 	mcp->chip.owner = THIS_MODULE;
 
-	spi_set_drvdata(spi, mcp);
-
-	/* verify MCP_IOCON.SEQOP = 0, so sequential reads work */
+	/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
+	 * and MCP_IOCON.HAEN = 1, so we work with all chips.
+	 */
 	status = mcp23s08_read(mcp, MCP_IOCON);
 	if (status < 0)
 		goto fail;
-	if (status & IOCON_SEQOP) {
+	if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN)) {
 		status &= ~IOCON_SEQOP;
+		status |= IOCON_HAEN;
 		status = mcp23s08_write(mcp, MCP_IOCON, (u8) status);
 		if (status < 0)
 			goto fail;
 	}
 
 	/* configure ~100K pullups */
-	status = mcp23s08_write(mcp, MCP_GPPU, pdata->pullups);
+	status = mcp23s08_write(mcp, MCP_GPPU, pullups);
 	if (status < 0)
 		goto fail;
 
@@ -283,11 +288,58 @@ static int mcp23s08_probe(struct spi_device *spi)
 		tx[1] = MCP_IPOL;
 		memcpy(&tx[2], &mcp->cache[MCP_IPOL], sizeof(tx) - 2);
 		status = spi_write_then_read(mcp->spi, tx, sizeof tx, NULL, 0);
-
-		/* FIXME check status... */
+		if (status < 0)
+			goto fail;
 	}
 
 	status = gpiochip_add(&mcp->chip);
+fail:
+	if (status < 0)
+		dev_dbg(&spi->dev, "can't setup chip %d, --> %d\n",
+				addr, status);
+	return status;
+}
+
+static int mcp23s08_probe(struct spi_device *spi)
+{
+	struct mcp23s08_platform_data	*pdata;
+	unsigned			addr;
+	unsigned			chips = 0;
+	struct mcp23s08_driver_data	*data;
+	int				status;
+	unsigned			base;
+
+	pdata = spi->dev.platform_data;
+	if (!pdata || !gpio_is_valid(pdata->base))
+		return -ENODEV;
+
+	for (addr = 0; addr < 4; addr++) {
+		if (!pdata->chip[addr].is_present)
+			continue;
+		chips++;
+	}
+	if (!chips)
+		return -ENODEV;
+
+	data = kzalloc(sizeof *data + chips * sizeof(struct mcp23s08),
+			GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	spi_set_drvdata(spi, data);
+
+	base = pdata->base;
+	for (addr = 0; addr < 4; addr++) {
+		if (!pdata->chip[addr].is_present)
+			continue;
+		chips--;
+		data->mcp[addr] = &data->chip[chips];
+		status = mcp23s08_probe_one(spi, addr, base,
+				pdata->chip[addr].pullups);
+		if (status < 0)
+			goto fail;
+		base += 8;
+	}
+	data->ngpio = base - pdata->base;
 
 	/* NOTE:  these chips have a relatively sane IRQ framework, with
 	 * per-signal masking and level/edge triggering.  It's not yet
@@ -295,8 +347,9 @@ static int mcp23s08_probe(struct spi_device *spi)
 	 */
 
 	if (pdata->setup) {
-		status = pdata->setup(spi, mcp->chip.base,
-				mcp->chip.ngpio, pdata->context);
+		status = pdata->setup(spi,
+				pdata->base, data->ngpio,
+				pdata->context);
 		if (status < 0)
 			dev_dbg(&spi->dev, "setup --> %d\n", status);
 	}
@@ -304,19 +357,29 @@ static int mcp23s08_probe(struct spi_device *spi)
 	return 0;
 
 fail:
-	kfree(mcp);
+	for (addr = 0; addr < 4; addr++) {
+		int tmp;
+
+		if (!data->mcp[addr])
+			continue;
+		tmp = gpiochip_remove(&data->mcp[addr]->chip);
+		if (tmp < 0)
+			dev_err(&spi->dev, "%s --> %d\n", "remove", tmp);
+	}
+	kfree(data);
 	return status;
 }
 
 static int mcp23s08_remove(struct spi_device *spi)
 {
-	struct mcp23s08			*mcp = spi_get_drvdata(spi);
+	struct mcp23s08_driver_data	*data = spi_get_drvdata(spi);
 	struct mcp23s08_platform_data	*pdata = spi->dev.platform_data;
+	unsigned			addr;
 	int				status = 0;
 
 	if (pdata->teardown) {
 		status = pdata->teardown(spi,
-				mcp->chip.base, mcp->chip.ngpio,
+				pdata->base, data->ngpio,
 				pdata->context);
 		if (status < 0) {
 			dev_err(&spi->dev, "%s --> %d\n", "teardown", status);
@@ -324,11 +387,20 @@ static int mcp23s08_remove(struct spi_device *spi)
 		}
 	}
 
-	status = gpiochip_remove(&mcp->chip);
+	for (addr = 0; addr < 4; addr++) {
+		int tmp;
+
+		if (!data->mcp[addr])
+			continue;
+
+		tmp = gpiochip_remove(&data->mcp[addr]->chip);
+		if (tmp < 0) {
+			dev_err(&spi->dev, "%s --> %d\n", "remove", tmp);
+			status = tmp;
+		}
+	}
 	if (status == 0)
-		kfree(mcp);
-	else
-		dev_err(&spi->dev, "%s --> %d\n", "remove", status);
+		kfree(data);
 	return status;
 }
 
@@ -356,4 +428,3 @@ static void __exit mcp23s08_exit(void)
 module_exit(mcp23s08_exit);
 
 MODULE_LICENSE("GPL");
-
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
index 835ddf47d45..22ef107d770 100644
--- a/include/linux/spi/mcp23s08.h
+++ b/include/linux/spi/mcp23s08.h
@@ -1,18 +1,25 @@
 
-/* FIXME driver should be able to handle all four slaves that
- * can be hooked up to each chipselect, as well as IRQs...
- */
+/* FIXME driver should be able to handle IRQs...  */
+
+struct mcp23s08_chip_info {
+	bool	is_present;		/* true iff populated */
+	u8	pullups;		/* BIT(x) means enable pullup x */
+};
 
 struct mcp23s08_platform_data {
-	/* four slaves can share one SPI chipselect */
-	u8		slave;
+	/* Four slaves (numbered 0..3) can share one SPI chipselect, and
+	 * will provide 8..32 GPIOs using 1..4 gpio_chip instances.
+	 */
+	struct mcp23s08_chip_info	chip[4];
 
-	/* number assigned to the first GPIO */
+	/* "base" is the number of the first GPIO.  Dynamic assignment is
+	 * not currently supported, and even if there are gaps in chip
+	 * addressing the GPIO numbers are sequential .. so for example
+	 * if only slaves 0 and 3 are present, their GPIOs range from
+	 * base to base+15.
+	 */
 	unsigned	base;
 
-	/* pins with pullups */
-	u8		pullups;
-
 	void		*context;	/* param to setup/teardown */
 
 	int		(*setup)(struct spi_device *spi,
-- 
cgit v1.2.3


From ff1d5c2f0268f4e32103536e2e65480b5b7b6530 Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Fri, 25 Jul 2008 01:46:10 -0700
Subject: gpio: add bt8xxgpio driver

This adds the bt8xxgpio driver.  The purpose of the bt8xxgpio driver is to
export all of the 24 GPIO pins available on Brooktree 8xx chips to the
kernel GPIO infrastructure.

This makes it possible to use a physically modified BT8xx card as
cheap digital GPIO card.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: David Brownell <david-b@pacbell.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/bt8xxgpio.txt |  67 +++++++++
 MAINTAINERS                 |   6 +
 drivers/gpio/Kconfig        |  18 +++
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/bt8xxgpio.c    | 348 ++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 440 insertions(+)
 create mode 100644 Documentation/bt8xxgpio.txt
 create mode 100644 drivers/gpio/bt8xxgpio.c

diff --git a/Documentation/bt8xxgpio.txt b/Documentation/bt8xxgpio.txt
new file mode 100644
index 00000000000..d8297e4ebd2
--- /dev/null
+++ b/Documentation/bt8xxgpio.txt
@@ -0,0 +1,67 @@
+===============================================================
+==  BT8XXGPIO driver                                         ==
+==                                                           ==
+==  A driver for a selfmade cheap BT8xx based PCI GPIO-card  ==
+==                                                           ==
+==  For advanced documentation, see                          ==
+==  http://www.bu3sch.de/btgpio.php                          ==
+===============================================================
+
+
+A generic digital 24-port PCI GPIO card can be built out of an ordinary
+Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The
+Brooktree chip is used in old analog Hauppauge WinTV PCI cards. You can easily
+find them used for low prices on the net.
+
+The bt8xx chip does have 24 digital GPIO ports.
+These ports are accessible via 24 pins on the SMD chip package.
+
+
+==============================================
+==  How to physically access the GPIO pins  ==
+==============================================
+
+The are several ways to access these pins. One might unsolder the whole chip
+and put it on a custom PCI board, or one might only unsolder each individual
+GPIO pin and solder that to some tiny wire. As the chip package really is tiny
+there are some advanced soldering skills needed in any case.
+
+The physical pinouts are drawn in the following ASCII art.
+The GPIO pins are marked with G00-G23
+
+                                           G G G G G G G G G G G G     G G G G G G
+                                           0 0 0 0 0 0 0 0 0 0 1 1     1 1 1 1 1 1
+                                           0 1 2 3 4 5 6 7 8 9 0 1     2 3 4 5 6 7
+           | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+           ---------------------------------------------------------------------------
+         --|                               ^                                     ^   |--
+         --|                               pin 86                           pin 67   |--
+         --|                                                                         |--
+         --|                                                               pin 61 >  |-- G18
+         --|                                                                         |-- G19
+         --|                                                                         |-- G20
+         --|                                                                         |-- G21
+         --|                                                                         |-- G22
+         --|                                                               pin 56 >  |-- G23
+         --|                                                                         |--
+         --|                           Brooktree 878/879                             |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|                                                                         |--
+         --|   O                                                                     |--
+         --|                                                                         |--
+           ---------------------------------------------------------------------------
+           | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+           ^
+           This is pin 1
+
diff --git a/MAINTAINERS b/MAINTAINERS
index be05ef9b7b4..4cbf6016a9b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1043,6 +1043,12 @@ M:	fujita.tomonori@lab.ntt.co.jp
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 
+BT8XXGPIO DRIVER
+P:	Michael Buesch
+M:	mb@bu3sch.de
+W:	http://bu3sch.de/btgpio.php
+S:	Maintained
+
 BTTV VIDEO4LINUX DRIVER
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 6ec0e35b98e..de202dbe530 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -83,6 +83,24 @@ config GPIO_PCF857X
 	  This driver provides an in-kernel interface to those GPIOs using
 	  platform-neutral GPIO calls.
 
+comment "PCI GPIO expanders:"
+
+config GPIO_BT8XX
+	tristate "BT8XX GPIO abuser"
+	depends on PCI && VIDEO_BT848=n
+	help
+	  The BT8xx frame grabber chip has 24 GPIO pins than can be abused
+	  as a cheap PCI GPIO card.
+
+	  This chip can be found on Miro, Hauppauge and STB TV-cards.
+
+	  The card needs to be physically altered for using it as a
+	  GPIO card. For more information on how to build a GPIO card
+	  from a BT8xx TV card, see the documentation file at
+	  Documentation/bt8xxgpio.txt
+
+	  If unsure, say N.
+
 comment "SPI GPIO expanders:"
 
 config GPIO_MAX7301
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 16e796dc541..eeb2f2b2028 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
+obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
diff --git a/drivers/gpio/bt8xxgpio.c b/drivers/gpio/bt8xxgpio.c
new file mode 100644
index 00000000000..7a1168249dd
--- /dev/null
+++ b/drivers/gpio/bt8xxgpio.c
@@ -0,0 +1,348 @@
+/*
+
+    bt8xx GPIO abuser
+
+    Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
+
+    Please do _only_ contact the people listed _above_ with issues related to this driver.
+    All the other people listed below are not related to this driver. Their names
+    are only here, because this driver is derived from the bt848 driver.
+
+
+    Derived from the bt848 driver:
+
+    Copyright (C) 1996,97,98 Ralph  Metzler
+			   & Marcus Metzler
+    (c) 1999-2002 Gerd Knorr
+
+    some v4l2 code lines are taken from Justin's bttv2 driver which is
+    (c) 2000 Justin Schoeman
+
+    V4L1 removal from:
+    (c) 2005-2006 Nickolay V. Shmyrev
+
+    Fixes to be fully V4L2 compliant by
+    (c) 2006 Mauro Carvalho Chehab
+
+    Cropping and overscan support
+    Copyright (C) 2005, 2006 Michael H. Schimek
+    Sponsored by OPQ Systems AB
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include <asm/gpio.h>
+
+/* Steal the hardware definitions from the bttv driver. */
+#include "../media/video/bt8xx/bt848.h"
+
+
+#define BT8XXGPIO_NR_GPIOS		24 /* We have 24 GPIO pins */
+
+
+struct bt8xxgpio {
+	spinlock_t lock;
+
+	void __iomem *mmio;
+	struct pci_dev *pdev;
+	struct gpio_chip gpio;
+
+#ifdef CONFIG_PM
+	u32 saved_outen;
+	u32 saved_data;
+#endif
+};
+
+#define bgwrite(dat, adr)	writel((dat), bg->mmio+(adr))
+#define bgread(adr)		readl(bg->mmio+(adr))
+
+
+static int modparam_gpiobase = -1/* dynamic */;
+module_param_named(gpiobase, modparam_gpiobase, int, 0444);
+MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
+
+
+static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 outen, data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	data = bgread(BT848_GPIO_DATA);
+	data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	outen = bgread(BT848_GPIO_OUT_EN);
+	outen &= ~(1 << nr);
+	bgwrite(outen, BT848_GPIO_OUT_EN);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+
+static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&bg->lock, flags);
+	val = bgread(BT848_GPIO_DATA);
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return !!(val & (1 << nr));
+}
+
+static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio,
+					unsigned nr, int val)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 outen, data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	outen = bgread(BT848_GPIO_OUT_EN);
+	outen |= (1 << nr);
+	bgwrite(outen, BT848_GPIO_OUT_EN);
+
+	data = bgread(BT848_GPIO_DATA);
+	if (val)
+		data |= (1 << nr);
+	else
+		data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+
+static void bt8xxgpio_gpio_set(struct gpio_chip *gpio,
+			    unsigned nr, int val)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	data = bgread(BT848_GPIO_DATA);
+	if (val)
+		data |= (1 << nr);
+	else
+		data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+}
+
+static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg)
+{
+	struct gpio_chip *c = &bg->gpio;
+
+	c->label = bg->pdev->dev.bus_id;
+	c->owner = THIS_MODULE;
+	c->direction_input = bt8xxgpio_gpio_direction_input;
+	c->get = bt8xxgpio_gpio_get;
+	c->direction_output = bt8xxgpio_gpio_direction_output;
+	c->set = bt8xxgpio_gpio_set;
+	c->dbg_show = NULL;
+	c->base = modparam_gpiobase;
+	c->ngpio = BT8XXGPIO_NR_GPIOS;
+	c->can_sleep = 0;
+}
+
+static int bt8xxgpio_probe(struct pci_dev *dev,
+			const struct pci_device_id *pci_id)
+{
+	struct bt8xxgpio *bg;
+	int err;
+
+	bg = kzalloc(sizeof(*bg), GFP_KERNEL);
+	if (!bg)
+		return -ENOMEM;
+
+	bg->pdev = dev;
+	spin_lock_init(&bg->lock);
+
+	err = pci_enable_device(dev);
+	if (err) {
+		printk(KERN_ERR "bt8xxgpio: Can't enable device.\n");
+		goto err_freebg;
+	}
+	if (!request_mem_region(pci_resource_start(dev, 0),
+				pci_resource_len(dev, 0),
+				"bt8xxgpio")) {
+		printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n",
+		       (unsigned long long)pci_resource_start(dev, 0));
+		err = -EBUSY;
+		goto err_disable;
+	}
+	pci_set_master(dev);
+	pci_set_drvdata(dev, bg);
+
+	bg->mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
+	if (!bg->mmio) {
+		printk(KERN_ERR "bt8xxgpio: ioremap() failed\n");
+		err = -EIO;
+		goto err_release_mem;
+	}
+
+	/* Disable interrupts */
+	bgwrite(0, BT848_INT_MASK);
+
+	/* gpio init */
+	bgwrite(0, BT848_GPIO_DMA_CTL);
+	bgwrite(0, BT848_GPIO_REG_INP);
+	bgwrite(0, BT848_GPIO_OUT_EN);
+
+	bt8xxgpio_gpio_setup(bg);
+	err = gpiochip_add(&bg->gpio);
+	if (err) {
+		printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n");
+		goto err_release_mem;
+	}
+
+	printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n",
+	       bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1);
+
+	return 0;
+
+err_release_mem:
+	release_mem_region(pci_resource_start(dev, 0),
+			   pci_resource_len(dev, 0));
+	pci_set_drvdata(dev, NULL);
+err_disable:
+	pci_disable_device(dev);
+err_freebg:
+	kfree(bg);
+
+	return err;
+}
+
+static void bt8xxgpio_remove(struct pci_dev *pdev)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+
+	gpiochip_remove(&bg->gpio);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(~0x0, BT848_INT_STAT);
+	bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+	iounmap(bg->mmio);
+	release_mem_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0));
+	pci_disable_device(pdev);
+
+	pci_set_drvdata(pdev, NULL);
+	kfree(bg);
+}
+
+#ifdef CONFIG_PM
+static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	bg->saved_outen = bgread(BT848_GPIO_OUT_EN);
+	bg->saved_data = bgread(BT848_GPIO_DATA);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(~0x0, BT848_INT_STAT);
+	bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int bt8xxgpio_resume(struct pci_dev *pdev)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+	unsigned long flags;
+	int err;
+
+	pci_set_power_state(pdev, 0);
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+	pci_restore_state(pdev);
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(0, BT848_GPIO_DMA_CTL);
+	bgwrite(0, BT848_GPIO_REG_INP);
+	bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);
+	bgwrite(bg->saved_data & bg->saved_outen,
+		BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+#else
+#define bt8xxgpio_suspend NULL
+#define bt8xxgpio_resume NULL
+#endif /* CONFIG_PM */
+
+static struct pci_device_id bt8xxgpio_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl);
+
+static struct pci_driver bt8xxgpio_pci_driver = {
+	.name		= "bt8xxgpio",
+	.id_table	= bt8xxgpio_pci_tbl,
+	.probe		= bt8xxgpio_probe,
+	.remove		= bt8xxgpio_remove,
+	.suspend	= bt8xxgpio_suspend,
+	.resume		= bt8xxgpio_resume,
+};
+
+static int bt8xxgpio_init(void)
+{
+	return pci_register_driver(&bt8xxgpio_pci_driver);
+}
+module_init(bt8xxgpio_init)
+
+static void bt8xxgpio_exit(void)
+{
+	pci_unregister_driver(&bt8xxgpio_pci_driver);
+}
+module_exit(bt8xxgpio_exit)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Buesch");
+MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");
-- 
cgit v1.2.3


From 7444a72effa632fcd8edc566f880d96fe213c73b Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Fri, 25 Jul 2008 01:46:11 -0700
Subject: gpiolib: allow user-selection

This patch adds functionality to the gpio-lib subsystem to make it
possible to enable the gpio-lib code even if the architecture code didn't
request to get it built in.

The archtitecture code does still need to implement the gpiolib accessor
functions in its asm/gpio.h file.  This patch adds the implementations for
x86 and PPC.

With these changes it is possible to run generic GPIO expansion cards on
every architecture that implements the trivial wrapper functions.  Support
for more architectures can easily be added.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/gpio.txt               | 12 +++++++-
 arch/arm/Kconfig                     |  8 +++---
 arch/avr32/Kconfig                   |  2 +-
 arch/mips/Kconfig                    |  2 +-
 arch/powerpc/Kconfig                 |  1 +
 arch/powerpc/platforms/52xx/Kconfig  |  2 +-
 arch/powerpc/sysdev/qe_lib/Kconfig   |  2 +-
 arch/x86/Kconfig                     |  1 +
 drivers/Makefile                     |  2 +-
 drivers/gpio/Kconfig                 | 33 ++++++++++++++++++---
 drivers/gpio/Makefile                |  2 +-
 drivers/i2c/chips/Kconfig            |  2 +-
 drivers/mfd/Kconfig                  |  4 +--
 drivers/of/Kconfig                   |  2 +-
 include/asm-generic/gpio.h           |  2 +-
 include/asm-mips/mach-generic/gpio.h |  2 +-
 include/asm-powerpc/gpio.h           |  4 +--
 include/asm-x86/gpio.h               | 56 ++++++++++++++++++++++++++++++++++++
 18 files changed, 116 insertions(+), 23 deletions(-)

diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 8b69811a964..18022e249c5 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -389,11 +389,21 @@ either NULL or the label associated with that GPIO when it was requested.
 
 Platform Support
 ----------------
-To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB"
+To support this framework, a platform's Kconfig will "select" either
+ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
 and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
 three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
 They may also want to provide a custom value for ARCH_NR_GPIOS.
 
+ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
+into the kernel on that architecture.
+
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
+can enable it and build it into the kernel optionally.
+
+If neither of these options are selected, the platform does not support
+GPIOs through GPIO-lib and the code cannot be enabled by the user.
+
 Trivial implementations of those functions can directly use framework
 code, which always dispatches through the gpio_chip:
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6fb4f03369f..dabb015aa40 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -268,7 +268,7 @@ config ARCH_EP93XX
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_CLK
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -447,7 +447,7 @@ config ARCH_PXA
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -479,7 +479,7 @@ config ARCH_SA1100
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	select TICK_ONESHOT
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for StrongARM 11x0 based boards.
 
@@ -522,7 +522,7 @@ config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index df4adefedb4..7c239a91627 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -88,7 +88,7 @@ config PLATFORM_AT32AP
 	select SUBARCH_AVR32B
 	select MMU
 	select PERFORMANCE_COUNTERS
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
 
 #
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b9c754f4070..b4c4eaa5dd2 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -713,7 +713,7 @@ config CSRC_SB1250
 
 config GPIO_TXX9
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	bool
 
 config CFE
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index de6b49cd6be..fe88418167c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -110,6 +110,7 @@ config PPC
 	default y
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index d664b1bce38..ccbd4958412 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -48,6 +48,6 @@ config PPC_MPC5200_BUGFIX
 config PPC_MPC5200_GPIO
 	bool "MPC5200 GPIO support"
 	depends on PPC_MPC52xx
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Enable gpiolib support for mpc5200 based boards
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 4bb18f57901..1ce546462be 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -29,7 +29,7 @@ config QE_GPIO
 	bool "QE GPIO support"
 	depends on QUICC_ENGINE
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Say Y here if you're going to use hardware that connects to the
 	  QE GPIOs.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 66f3ab05b18..e3cba0b4560 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -23,6 +23,7 @@ config X86
 	select HAVE_OPROFILE
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
+	select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X
 	select HAVE_KRETPROBES
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
diff --git a/drivers/Makefile b/drivers/Makefile
index 808e0ae66aa..54ec5e718c0 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -5,7 +5,7 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpio/
+obj-y				+= gpio/
 obj-$(CONFIG_PCI)		+= pci/
 obj-$(CONFIG_PARISC)		+= parisc/
 obj-$(CONFIG_RAPIDIO)		+= rapidio/
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index de202dbe530..5a355f82916 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -2,15 +2,40 @@
 # GPIO infrastructure and expanders
 #
 
-config HAVE_GPIO_LIB
+config ARCH_WANT_OPTIONAL_GPIOLIB
 	bool
+	help
+	  Select this config option from the architecture Kconfig, if
+	  it is possible to use gpiolib on the architecture, but let the
+	  user decide whether to actually build it or not.
+	  Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
+	  not depend on GPIOs being available, but rather let the user
+	  decide whether he needs it or not.
+
+config ARCH_REQUIRE_GPIOLIB
+	bool
+	select GPIOLIB
 	help
 	  Platforms select gpiolib if they use this infrastructure
 	  for all their GPIOs, usually starting with ones integrated
 	  into SOC processors.
+	  Selecting this from the architecture code will cause the gpiolib
+	  code to always get built in.
+
+
+
+menuconfig GPIOLIB
+	bool "GPIO Support"
+	depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
+	help
+	  This enables GPIO support through the generic GPIO library.
+	  You only need to enable this, if you also want to enable
+	  one or more of the GPIO expansion card drivers below.
+
+	  If unsure, say N.
 
-menu "GPIO Support"
-	depends on HAVE_GPIO_LIB
+if GPIOLIB
 
 config DEBUG_GPIO
 	bool "Debug GPIO calls"
@@ -116,4 +141,4 @@ config GPIO_MCP23S08
 	  SPI driver for Microchip MCP23S08 I/O expander.  This provides
 	  a GPIO interface supporting inputs and outputs.
 
-endmenu
+endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index eeb2f2b2028..8c45948d1fe 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -2,7 +2,7 @@
 
 ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 
-obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpiolib.o
+obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
 
 obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 50e0a465374..a95cb9465d6 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,7 +126,7 @@ config ISP1301_OMAP
 
 config TPS65010
 	tristate "TPS6501x Power Management chips"
-	depends on HAVE_GPIO_LIB
+	depends on GPIOLIB
 	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 	help
 	  If you say yes here you get support for the TPS6501x series of
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bac9e973ece..1f57a99fd96 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -36,7 +36,7 @@ config MFD_ASIC3
 
 config HTC_EGPIO
 	bool "HTC EGPIO support"
-	depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
+	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
 	help
 	    This driver supports the CPLD egpio chip present on
 	    several HTC phones.  It provides basic support for input
@@ -52,7 +52,7 @@ config HTC_PASIC3
 
 config MFD_TC6393XB
 	bool "Support Toshiba TC6393XB"
-	depends on HAVE_GPIO_LIB
+	depends on GPIOLIB
 	select MFD_CORE
 	help
 	  Support for Toshiba Mobile IO Controller TC6393XB
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 3a7a11a75fb..1d7ec312934 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -4,7 +4,7 @@ config OF_DEVICE
 
 config OF_GPIO
 	def_bool y
-	depends on OF && PPC_OF && HAVE_GPIO_LIB
+	depends on OF && PPC_OF && GPIOLIB
 	help
 	  OpenFirmware GPIO accessors
 
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 1beff5166e5..a3034d20ebd 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -3,7 +3,7 @@
 
 #include <linux/types.h>
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 
 #include <linux/compiler.h>
 
diff --git a/include/asm-mips/mach-generic/gpio.h b/include/asm-mips/mach-generic/gpio.h
index e6b376bd9d0..b4e70208da6 100644
--- a/include/asm-mips/mach-generic/gpio.h
+++ b/include/asm-mips/mach-generic/gpio.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_GENERIC_GPIO_H
 #define __ASM_MACH_GENERIC_GPIO_H
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 #define gpio_get_value	__gpio_get_value
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h
index 77ad3a890f3..ea04632399d 100644
--- a/include/asm-powerpc/gpio.h
+++ b/include/asm-powerpc/gpio.h
@@ -17,7 +17,7 @@
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 
 /*
  * We don't (yet) implement inlined/rapid versions for on-chip gpios.
@@ -51,6 +51,6 @@ static inline int irq_to_gpio(unsigned int irq)
 	return -EINVAL;
 }
 
-#endif /* CONFIG_HAVE_GPIO_LIB */
+#endif /* CONFIG_GPIOLIB */
 
 #endif /* __ASM_POWERPC_GPIO_H */
diff --git a/include/asm-x86/gpio.h b/include/asm-x86/gpio.h
index ff87fca0caf..116e9147fe6 100644
--- a/include/asm-x86/gpio.h
+++ b/include/asm-x86/gpio.h
@@ -1,6 +1,62 @@
+/*
+ * Generic GPIO API implementation for x86.
+ *
+ * Derived from the generic GPIO API for powerpc:
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
 #ifndef _ASM_I386_GPIO_H
 #define _ASM_I386_GPIO_H
 
+#ifdef CONFIG_X86_RDC321X
 #include <gpio.h>
+#else /* CONFIG_X86_RDC321X */
+
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* CONFIG_X86_RDC321X */
 
 #endif /* _ASM_I386_GPIO_H */
-- 
cgit v1.2.3


From bbcd6d543de335bf81e96477f46a60a8bf51039c Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 25 Jul 2008 01:46:14 -0700
Subject: gpio: max732x driver

This adds a driver supporting a family of I2C port expanders from Maxim,
which includes the MAX7319 and MAX7320-7327 chips.

[dbrownell@users.sourceforge.net: minor fixes]
Signed-off-by: Jack Ren <jack.ren@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/gpio/Kconfig        |  19 +++
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/max732x.c      | 385 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/i2c/max732x.h |  19 +++
 4 files changed, 424 insertions(+)
 create mode 100644 drivers/gpio/max732x.c
 create mode 100644 include/linux/i2c/max732x.h

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 5a355f82916..dbd42d6c93a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -67,6 +67,25 @@ config GPIO_SYSFS
 
 comment "I2C GPIO expanders:"
 
+config GPIO_MAX732X
+	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
+	depends on I2C
+	help
+	  Say yes here to support the MAX7319, MAX7320-7327 series of I2C
+	  Port Expanders. Each IO port on these chips has a fixed role of
+	  Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
+	  Input and Output (designed by 'P'). The combinations are listed
+	  below:
+
+	  8 bits:	max7319 (8I), max7320 (8O), max7321 (8P),
+		  	max7322 (4I4O), max7323 (4P4O)
+
+	  16 bits:	max7324 (8I8O), max7325 (8P8O),
+		  	max7326 (4I12O), max7327 (4P12O)
+
+	  Board setup code must specify the model to use, and the start
+	  number for these GPIOs.
+
 config GPIO_PCA953X
 	tristate "PCA953x, PCA955x, and MAX7310 I/O ports"
 	depends on I2C
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 8c45948d1fe..01b4bbde195 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
 
 obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
+obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
diff --git a/drivers/gpio/max732x.c b/drivers/gpio/max732x.c
new file mode 100644
index 00000000000..b51c8135ca2
--- /dev/null
+++ b/drivers/gpio/max732x.c
@@ -0,0 +1,385 @@
+/*
+ *  max732x.c - I2C Port Expander with 8/16 I/O
+ *
+ *  Copyright (C) 2007 Marvell International Ltd.
+ *  Copyright (C) 2008 Jack Ren <jack.ren@marvell.com>
+ *  Copyright (C) 2008 Eric Miao <eric.miao@marvell.com>
+ *
+ *  Derived from drivers/gpio/pca953x.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/max732x.h>
+
+
+/*
+ * Each port of MAX732x (including MAX7319) falls into one of the
+ * following three types:
+ *
+ *   - Push Pull Output
+ *   - Input
+ *   - Open Drain I/O
+ *
+ * designated by 'O', 'I' and 'P' individually according to MAXIM's
+ * datasheets.
+ *
+ * There are two groups of I/O ports, each group usually includes
+ * up to 8 I/O ports, and is accessed by a specific I2C address:
+ *
+ *   - Group A : by I2C address 0b'110xxxx
+ *   - Group B : by I2C address 0b'101xxxx
+ *
+ * where 'xxxx' is decided by the connections of pin AD2/AD0.  The
+ * address used also affects the initial state of output signals.
+ *
+ * Within each group of ports, there are five known combinations of
+ * I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for
+ * the detailed organization of these ports.
+ *
+ * GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16',
+ * and GPIOs from GROUP_A are numbered before those from GROUP_B
+ * (if there are two groups).
+ *
+ * NOTE: MAX7328/MAX7329 are drop-in replacements for PCF8574/a, so
+ * they are not supported by this driver.
+ */
+
+#define PORT_NONE	0x0	/* '/' No Port */
+#define PORT_OUTPUT	0x1	/* 'O' Push-Pull, Output Only */
+#define PORT_INPUT	0x2	/* 'I' Input Only */
+#define PORT_OPENDRAIN	0x3	/* 'P' Open-Drain, I/O */
+
+#define IO_4I4O		0x5AA5	/* O7 O6 I5 I4 I3 I2 O1 O0 */
+#define IO_4P4O		0x5FF5	/* O7 O6 P5 P4 P3 P2 O1 O0 */
+#define IO_8I		0xAAAA	/* I7 I6 I5 I4 I3 I2 I1 I0 */
+#define IO_8P		0xFFFF	/* P7 P6 P5 P4 P3 P2 P1 P0 */
+#define IO_8O		0x5555	/* O7 O6 O5 O4 O3 O2 O1 O0 */
+
+#define GROUP_A(x)	((x) & 0xffff)	/* I2C Addr: 0b'110xxxx */
+#define GROUP_B(x)	((x) << 16)	/* I2C Addr: 0b'101xxxx */
+
+static const struct i2c_device_id max732x_id[] = {
+	{ "max7319", GROUP_A(IO_8I) },
+	{ "max7320", GROUP_B(IO_8O) },
+	{ "max7321", GROUP_A(IO_8P) },
+	{ "max7322", GROUP_A(IO_4I4O) },
+	{ "max7323", GROUP_A(IO_4P4O) },
+	{ "max7324", GROUP_A(IO_8I) | GROUP_B(IO_8O) },
+	{ "max7325", GROUP_A(IO_8P) | GROUP_B(IO_8O) },
+	{ "max7326", GROUP_A(IO_4I4O) | GROUP_B(IO_8O) },
+	{ "max7327", GROUP_A(IO_4P4O) | GROUP_B(IO_8O) },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max732x_id);
+
+struct max732x_chip {
+	struct gpio_chip gpio_chip;
+
+	struct i2c_client *client;	/* "main" client */
+	struct i2c_client *client_dummy;
+	struct i2c_client *client_group_a;
+	struct i2c_client *client_group_b;
+
+	unsigned int	mask_group_a;
+	unsigned int	dir_input;
+	unsigned int	dir_output;
+
+	struct mutex	lock;
+	uint8_t		reg_out[2];
+};
+
+static int max732x_write(struct max732x_chip *chip, int group_a, uint8_t val)
+{
+	struct i2c_client *client;
+	int ret;
+
+	client = group_a ? chip->client_group_a : chip->client_group_b;
+	ret = i2c_smbus_write_byte(client, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed writing\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max732x_read(struct max732x_chip *chip, int group_a, uint8_t *val)
+{
+	struct i2c_client *client;
+	int ret;
+
+	client = group_a ? chip->client_group_a : chip->client_group_b;
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed reading\n");
+		return ret;
+	}
+
+	*val = (uint8_t)ret;
+	return 0;
+}
+
+static inline int is_group_a(struct max732x_chip *chip, unsigned off)
+{
+	return (1u << off) & chip->mask_group_a;
+}
+
+static int max732x_gpio_get_value(struct gpio_chip *gc, unsigned off)
+{
+	struct max732x_chip *chip;
+	uint8_t reg_val;
+	int ret;
+
+	chip = container_of(gc, struct max732x_chip, gpio_chip);
+
+	ret = max732x_read(chip, is_group_a(chip, off), &reg_val);
+	if (ret < 0)
+		return 0;
+
+	return reg_val & (1u << (off & 0x7));
+}
+
+static void max732x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
+{
+	struct max732x_chip *chip;
+	uint8_t reg_out, mask = 1u << (off & 0x7);
+	int ret;
+
+	chip = container_of(gc, struct max732x_chip, gpio_chip);
+
+	mutex_lock(&chip->lock);
+
+	reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0];
+	reg_out = (val) ? reg_out | mask : reg_out & ~mask;
+
+	ret = max732x_write(chip, is_group_a(chip, off), reg_out);
+	if (ret < 0)
+		goto out;
+
+	/* update the shadow register then */
+	if (off > 7)
+		chip->reg_out[1] = reg_out;
+	else
+		chip->reg_out[0] = reg_out;
+out:
+	mutex_unlock(&chip->lock);
+}
+
+static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
+{
+	struct max732x_chip *chip;
+	unsigned int mask = 1u << off;
+
+	chip = container_of(gc, struct max732x_chip, gpio_chip);
+
+	if ((mask & chip->dir_input) == 0) {
+		dev_dbg(&chip->client->dev, "%s port %d is output only\n",
+			chip->client->name, off);
+		return -EACCES;
+	}
+
+	return 0;
+}
+
+static int max732x_gpio_direction_output(struct gpio_chip *gc,
+		unsigned off, int val)
+{
+	struct max732x_chip *chip;
+	unsigned int mask = 1u << off;
+
+	chip = container_of(gc, struct max732x_chip, gpio_chip);
+
+	if ((mask & chip->dir_output) == 0) {
+		dev_dbg(&chip->client->dev, "%s port %d is input only\n",
+			chip->client->name, off);
+		return -EACCES;
+	}
+
+	max732x_gpio_set_value(gc, off, val);
+	return 0;
+}
+
+static int __devinit max732x_setup_gpio(struct max732x_chip *chip,
+					const struct i2c_device_id *id,
+					unsigned gpio_start)
+{
+	struct gpio_chip *gc = &chip->gpio_chip;
+	uint32_t id_data = id->driver_data;
+	int i, port = 0;
+
+	for (i = 0; i < 16; i++, id_data >>= 2) {
+		unsigned int mask = 1 << port;
+
+		switch (id_data & 0x3) {
+		case PORT_OUTPUT:
+			chip->dir_output |= mask;
+			break;
+		case PORT_INPUT:
+			chip->dir_input |= mask;
+			break;
+		case PORT_OPENDRAIN:
+			chip->dir_output |= mask;
+			chip->dir_input |= mask;
+			break;
+		default:
+			continue;
+		}
+
+		if (i < 8)
+			chip->mask_group_a |= mask;
+		port++;
+	}
+
+	if (chip->dir_input)
+		gc->direction_input = max732x_gpio_direction_input;
+	if (chip->dir_output) {
+		gc->direction_output = max732x_gpio_direction_output;
+		gc->set = max732x_gpio_set_value;
+	}
+	gc->get = max732x_gpio_get_value;
+	gc->can_sleep = 1;
+
+	gc->base = gpio_start;
+	gc->ngpio = port;
+	gc->label = chip->client->name;
+	gc->owner = THIS_MODULE;
+
+	return port;
+}
+
+static int __devinit max732x_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct max732x_platform_data *pdata;
+	struct max732x_chip *chip;
+	struct i2c_client *c;
+	uint16_t addr_a, addr_b;
+	int ret, nr_port;
+
+	pdata = client->dev.platform_data;
+	if (pdata == NULL)
+		return -ENODEV;
+
+	chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+	chip->client = client;
+
+	nr_port = max732x_setup_gpio(chip, id, pdata->gpio_base);
+
+	addr_a = (client->addr & 0x0f) | 0x60;
+	addr_b = (client->addr & 0x0f) | 0x50;
+
+	switch (client->addr & 0x70) {
+	case 0x60:
+		chip->client_group_a = client;
+		if (nr_port > 7) {
+			c = i2c_new_dummy(client->adapter, addr_b);
+			chip->client_group_b = chip->client_dummy = c;
+		}
+		break;
+	case 0x50:
+		chip->client_group_b = client;
+		if (nr_port > 7) {
+			c = i2c_new_dummy(client->adapter, addr_a);
+			chip->client_group_a = chip->client_dummy = c;
+		}
+		break;
+	default:
+		dev_err(&client->dev, "invalid I2C address specified %02x\n",
+				client->addr);
+		ret = -EINVAL;
+		goto out_failed;
+	}
+
+	mutex_init(&chip->lock);
+
+	max732x_read(chip, is_group_a(chip, 0), &chip->reg_out[0]);
+	if (nr_port > 7)
+		max732x_read(chip, is_group_a(chip, 8), &chip->reg_out[1]);
+
+	ret = gpiochip_add(&chip->gpio_chip);
+	if (ret)
+		goto out_failed;
+
+	if (pdata->setup) {
+		ret = pdata->setup(client, chip->gpio_chip.base,
+				chip->gpio_chip.ngpio, pdata->context);
+		if (ret < 0)
+			dev_warn(&client->dev, "setup failed, %d\n", ret);
+	}
+
+	i2c_set_clientdata(client, chip);
+	return 0;
+
+out_failed:
+	kfree(chip);
+	return ret;
+}
+
+static int __devexit max732x_remove(struct i2c_client *client)
+{
+	struct max732x_platform_data *pdata = client->dev.platform_data;
+	struct max732x_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	if (pdata->teardown) {
+		ret = pdata->teardown(client, chip->gpio_chip.base,
+				chip->gpio_chip.ngpio, pdata->context);
+		if (ret < 0) {
+			dev_err(&client->dev, "%s failed, %d\n",
+					"teardown", ret);
+			return ret;
+		}
+	}
+
+	ret = gpiochip_remove(&chip->gpio_chip);
+	if (ret) {
+		dev_err(&client->dev, "%s failed, %d\n",
+				"gpiochip_remove()", ret);
+		return ret;
+	}
+
+	/* unregister any dummy i2c_client */
+	if (chip->client_dummy)
+		i2c_unregister_device(chip->client_dummy);
+
+	kfree(chip);
+	return 0;
+}
+
+static struct i2c_driver max732x_driver = {
+	.driver = {
+		.name	= "max732x",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= max732x_probe,
+	.remove		= __devexit_p(max732x_remove),
+	.id_table	= max732x_id,
+};
+
+static int __init max732x_init(void)
+{
+	return i2c_add_driver(&max732x_driver);
+}
+module_init(max732x_init);
+
+static void __exit max732x_exit(void)
+{
+	i2c_del_driver(&max732x_driver);
+}
+module_exit(max732x_exit);
+
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_DESCRIPTION("GPIO expander driver for MAX732X");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/i2c/max732x.h b/include/linux/i2c/max732x.h
new file mode 100644
index 00000000000..e10336631c6
--- /dev/null
+++ b/include/linux/i2c/max732x.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_I2C_MAX732X_H
+#define __LINUX_I2C_MAX732X_H
+
+/* platform data for the MAX732x 8/16-bit I/O expander driver */
+
+struct max732x_platform_data {
+	/* number of the first GPIO */
+	unsigned	gpio_base;
+
+	void		*context;	/* param to setup/teardown */
+
+	int		(*setup)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	int		(*teardown)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+};
+#endif /* __LINUX_I2C_MAX732X_H */
-- 
cgit v1.2.3


From fb523f32275344282f20ef3352cbf03e599241e6 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:46:14 -0700
Subject: minix: remove !NO_TRUNCATE code

This patch removes the !NO_TRUNCATE code that anyway required a manual
editing of the code for being used.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/minix/inode.c |  3 ---
 fs/minix/minix.h |  6 ------
 fs/minix/namei.c | 24 ------------------------
 3 files changed, 33 deletions(-)

diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 84f6242ba6f..523d7371341 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -256,9 +256,6 @@ static int minix_fill_super(struct super_block *s, void *data, int silent)
 	if (!s->s_root)
 		goto out_iput;
 
-	if (!NO_TRUNCATE)
-		s->s_root->d_op = &minix_dentry_operations;
-
 	if (!(s->s_flags & MS_RDONLY)) {
 		if (sbi->s_version != MINIX_V3) /* s_state is now out from V3 sb */
 			ms->s_state &= ~MINIX_VALID_FS;
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index 326edfe9610..e6a0b193bea 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -2,11 +2,6 @@
 #include <linux/pagemap.h>
 #include <linux/minix_fs.h>
 
-/*
- * change the define below to 0 if you want names > info->s_namelen chars to be
- * truncated. Else they will be disallowed (ENAMETOOLONG).
- */
-#define NO_TRUNCATE 1
 #define INODE_VERSION(inode)	minix_sb(inode->i_sb)->s_version
 #define MINIX_V1		0x0001		/* original minix fs */
 #define MINIX_V2		0x0002		/* minix V2 fs */
@@ -83,7 +78,6 @@ extern const struct inode_operations minix_file_inode_operations;
 extern const struct inode_operations minix_dir_inode_operations;
 extern const struct file_operations minix_file_operations;
 extern const struct file_operations minix_dir_operations;
-extern struct dentry_operations minix_dentry_operations;
 
 static inline struct minix_sb_info *minix_sb(struct super_block *sb)
 {
diff --git a/fs/minix/namei.c b/fs/minix/namei.c
index 102241bc9c7..32b131cd612 100644
--- a/fs/minix/namei.c
+++ b/fs/minix/namei.c
@@ -18,30 +18,6 @@ static int add_nondir(struct dentry *dentry, struct inode *inode)
 	return err;
 }
 
-static int minix_hash(struct dentry *dentry, struct qstr *qstr)
-{
-	unsigned long hash;
-	int i;
-	const unsigned char *name;
-
-	i = minix_sb(dentry->d_inode->i_sb)->s_namelen;
-	if (i >= qstr->len)
-		return 0;
-	/* Truncate the name in place, avoids having to define a compare
-	   function. */
-	qstr->len = i;
-	name = qstr->name;
-	hash = init_name_hash();
-	while (i--)
-		hash = partial_name_hash(*name++, hash);
-	qstr->hash = end_name_hash(hash);
-	return 0;
-}
-
-struct dentry_operations minix_dentry_operations = {
-	.d_hash		= minix_hash,
-};
-
 static struct dentry *minix_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd)
 {
 	struct inode * inode = NULL;
-- 
cgit v1.2.3


From f905f06fca5d3949eca12f5a43e251a404b3470a Mon Sep 17 00:00:00 2001
From: Shen Feng <shen@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:46:15 -0700
Subject: ext2: remove double definitions of xattr macros

remove the definitions of macros:
XATTR_TRUSTED_PREFIX
XATTR_USER_PREFIX
since they are defined in linux/xattr.h

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext2/xattr_security.c | 2 +-
 fs/ext2/xattr_trusted.c  | 4 +---
 fs/ext2/xattr_user.c     | 4 +---
 3 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/fs/ext2/xattr_security.c b/fs/ext2/xattr_security.c
index eaa23d2d521..70c0dbdcdcb 100644
--- a/fs/ext2/xattr_security.c
+++ b/fs/ext2/xattr_security.c
@@ -14,7 +14,7 @@ static size_t
 ext2_xattr_security_list(struct inode *inode, char *list, size_t list_size,
 			 const char *name, size_t name_len)
 {
-	const int prefix_len = sizeof(XATTR_SECURITY_PREFIX)-1;
+	const int prefix_len = XATTR_SECURITY_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (list && total_len <= list_size) {
diff --git a/fs/ext2/xattr_trusted.c b/fs/ext2/xattr_trusted.c
index 83ee149f353..e8219f8eae9 100644
--- a/fs/ext2/xattr_trusted.c
+++ b/fs/ext2/xattr_trusted.c
@@ -12,13 +12,11 @@
 #include <linux/ext2_fs.h>
 #include "xattr.h"
 
-#define XATTR_TRUSTED_PREFIX "trusted."
-
 static size_t
 ext2_xattr_trusted_list(struct inode *inode, char *list, size_t list_size,
 			const char *name, size_t name_len)
 {
-	const int prefix_len = sizeof(XATTR_TRUSTED_PREFIX)-1;
+	const int prefix_len = XATTR_TRUSTED_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (!capable(CAP_SYS_ADMIN))
diff --git a/fs/ext2/xattr_user.c b/fs/ext2/xattr_user.c
index f383e7c3a7b..92495d28c62 100644
--- a/fs/ext2/xattr_user.c
+++ b/fs/ext2/xattr_user.c
@@ -11,13 +11,11 @@
 #include "ext2.h"
 #include "xattr.h"
 
-#define XATTR_USER_PREFIX "user."
-
 static size_t
 ext2_xattr_user_list(struct inode *inode, char *list, size_t list_size,
 		     const char *name, size_t name_len)
 {
-	const size_t prefix_len = sizeof(XATTR_USER_PREFIX)-1;
+	const size_t prefix_len = XATTR_USER_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (!test_opt(inode->i_sb, XATTR_USER))
-- 
cgit v1.2.3


From 50c33a84db4aa5082e3af8d873b22344ae2ebea8 Mon Sep 17 00:00:00 2001
From: Samuel Thibault <samuel.thibault@ens-lyon.org>
Date: Fri, 25 Jul 2008 01:46:16 -0700
Subject: ext2: fix typo in Hurd part of include/linux/ext2_fs.h

Fix typo in Hurd part of include/linux/ext2_fs.h

The ';' here is redundant or can even pose problem.  This is actually not
used by the Linux kernel, but it is exposed in GNU/Hurd.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ext2_fs.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h
index 84cec2aa9f1..2efe7b863cf 100644
--- a/include/linux/ext2_fs.h
+++ b/include/linux/ext2_fs.h
@@ -284,8 +284,8 @@ struct ext2_inode {
 
 #ifdef	__hurd__
 #define i_translator	osd1.hurd1.h_i_translator
-#define i_frag		osd2.hurd2.h_i_frag;
-#define i_fsize		osd2.hurd2.h_i_fsize;
+#define i_frag		osd2.hurd2.h_i_frag
+#define i_fsize		osd2.hurd2.h_i_fsize
 #define i_uid_high	osd2.hurd2.h_i_uid_high
 #define i_gid_high	osd2.hurd2.h_i_gid_high
 #define i_author	osd2.hurd2.h_i_author
-- 
cgit v1.2.3


From 9cfe7b9010aa66da5f3b2bc33d9e30a4d53bd274 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:16 -0700
Subject: ext3: fix synchronization of quota files in journal=data mode

In journal=data mode, it is not enough to do write_inode_now as done in
vfs_quota_on() to write all data to their final location (which is needed for
quota_read to work correctly).  Calling journal_flush() does its job.

Reported-by: Nick <gentuu@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/super.c | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 2845425077e..50796e90d07 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2759,23 +2759,42 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id,
 
 	if (!test_opt(sb, QUOTA))
 		return -EINVAL;
-	/* Not journalling quota or remount? */
-	if ((!EXT3_SB(sb)->s_qf_names[USRQUOTA] &&
-	    !EXT3_SB(sb)->s_qf_names[GRPQUOTA]) || remount)
+	/* When remounting, no checks are needed and in fact, path is NULL */
+	if (remount)
 		return vfs_quota_on(sb, type, format_id, path, remount);
+
 	err = path_lookup(path, LOOKUP_FOLLOW, &nd);
 	if (err)
 		return err;
+
 	/* Quotafile not on the same filesystem? */
 	if (nd.path.mnt->mnt_sb != sb) {
 		path_put(&nd.path);
 		return -EXDEV;
 	}
-	/* Quotafile not in fs root? */
-	if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
-		printk(KERN_WARNING
-			"EXT3-fs: Quota file not on filesystem root. "
-			"Journalled quota will not work.\n");
+	/* Journaling quota? */
+	if (EXT3_SB(sb)->s_qf_names[type]) {
+		/* Quotafile not of fs root? */
+		if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
+			printk(KERN_WARNING
+				"EXT3-fs: Quota file not on filesystem root. "
+				"Journaled quota will not work.\n");
+	}
+
+	/*
+	 * When we journal data on quota file, we have to flush journal to see
+	 * all updates to the file when we bypass pagecache...
+	 */
+	if (ext3_should_journal_data(nd.path.dentry->d_inode)) {
+		/*
+		 * We don't need to lock updates but journal_flush() could
+		 * otherwise be livelocked...
+		 */
+		journal_lock_updates(EXT3_SB(sb)->s_journal);
+		journal_flush(EXT3_SB(sb)->s_journal);
+		journal_unlock_updates(EXT3_SB(sb)->s_journal);
+	}
+
 	path_put(&nd.path);
 	return vfs_quota_on(sb, type, format_id, path, remount);
 }
-- 
cgit v1.2.3


From 99aeaf639f61ab6be1967e5f92e2e28dafad8383 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:17 -0700
Subject: ext3: fix typos in messages and comments (journalled -> journaled)

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/super.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 50796e90d07..0a1bf82845c 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -1020,7 +1020,7 @@ static int parse_options (char *options, struct super_block *sb,
 set_qf_name:
 			if (sb_any_quota_enabled(sb)) {
 				printk(KERN_ERR
-					"EXT3-fs: Cannot change journalled "
+					"EXT3-fs: Cannot change journaled "
 					"quota options when quota turned on.\n");
 				return 0;
 			}
@@ -1058,7 +1058,7 @@ set_qf_name:
 clear_qf_name:
 			if (sb_any_quota_enabled(sb)) {
 				printk(KERN_ERR "EXT3-fs: Cannot change "
-					"journalled quota options when "
+					"journaled quota options when "
 					"quota turned on.\n");
 				return 0;
 			}
@@ -1169,14 +1169,14 @@ clear_qf_name:
 		}
 
 		if (!sbi->s_jquota_fmt) {
-			printk(KERN_ERR "EXT3-fs: journalled quota format "
+			printk(KERN_ERR "EXT3-fs: journaled quota format "
 					"not specified.\n");
 			return 0;
 		}
 	} else {
 		if (sbi->s_jquota_fmt) {
-			printk(KERN_ERR "EXT3-fs: journalled quota format "
-					"specified with no journalling "
+			printk(KERN_ERR "EXT3-fs: journaled quota format "
+					"specified with no journaling "
 					"enabled.\n");
 			return 0;
 		}
@@ -1370,7 +1370,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
 			int ret = ext3_quota_on_mount(sb, i);
 			if (ret < 0)
 				printk(KERN_ERR
-					"EXT3-fs: Cannot turn on journalled "
+					"EXT3-fs: Cannot turn on journaled "
 					"quota: error %d\n", ret);
 		}
 	}
@@ -2712,7 +2712,7 @@ static int ext3_release_dquot(struct dquot *dquot)
 
 static int ext3_mark_dquot_dirty(struct dquot *dquot)
 {
-	/* Are we journalling quotas? */
+	/* Are we journaling quotas? */
 	if (EXT3_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] ||
 	    EXT3_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) {
 		dquot_mark_dquot_dirty(dquot);
-- 
cgit v1.2.3


From d06bf1d252fe16f5f0d13e04da7a9913420aa1cf Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:18 -0700
Subject: ext3: correct mount option parsing to detect when quota options can
 be changed

We should not allow user to change quota mount options when quota is just
suspended.  I would make mount options and internal quota state inconsistent.
Also we should not allow user to change quota format when quota is turned on.
On the other hand we can just silently ignore when some option is set to the
value it already has (mount does this on remount).

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/super.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 0a1bf82845c..615788c6843 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -842,7 +842,7 @@ static int parse_options (char *options, struct super_block *sb,
 	int data_opt = 0;
 	int option;
 #ifdef CONFIG_QUOTA
-	int qtype;
+	int qtype, qfmt;
 	char *qname;
 #endif
 
@@ -1018,7 +1018,9 @@ static int parse_options (char *options, struct super_block *sb,
 		case Opt_grpjquota:
 			qtype = GRPQUOTA;
 set_qf_name:
-			if (sb_any_quota_enabled(sb)) {
+			if ((sb_any_quota_enabled(sb) ||
+			     sb_any_quota_suspended(sb)) &&
+			    !sbi->s_qf_names[qtype]) {
 				printk(KERN_ERR
 					"EXT3-fs: Cannot change journaled "
 					"quota options when quota turned on.\n");
@@ -1056,7 +1058,9 @@ set_qf_name:
 		case Opt_offgrpjquota:
 			qtype = GRPQUOTA;
 clear_qf_name:
-			if (sb_any_quota_enabled(sb)) {
+			if ((sb_any_quota_enabled(sb) ||
+			     sb_any_quota_suspended(sb)) &&
+			    sbi->s_qf_names[qtype]) {
 				printk(KERN_ERR "EXT3-fs: Cannot change "
 					"journaled quota options when "
 					"quota turned on.\n");
@@ -1069,10 +1073,20 @@ clear_qf_name:
 			sbi->s_qf_names[qtype] = NULL;
 			break;
 		case Opt_jqfmt_vfsold:
-			sbi->s_jquota_fmt = QFMT_VFS_OLD;
-			break;
+			qfmt = QFMT_VFS_OLD;
+			goto set_qf_format;
 		case Opt_jqfmt_vfsv0:
-			sbi->s_jquota_fmt = QFMT_VFS_V0;
+			qfmt = QFMT_VFS_V0;
+set_qf_format:
+			if ((sb_any_quota_enabled(sb) ||
+			     sb_any_quota_suspended(sb)) &&
+			    sbi->s_jquota_fmt != qfmt) {
+				printk(KERN_ERR "EXT3-fs: Cannot change "
+					"journaled quota options when "
+					"quota turned on.\n");
+				return 0;
+			}
+			sbi->s_jquota_fmt = qfmt;
 			break;
 		case Opt_quota:
 		case Opt_usrquota:
@@ -1084,7 +1098,8 @@ clear_qf_name:
 			set_opt(sbi->s_mount_opt, GRPQUOTA);
 			break;
 		case Opt_noquota:
-			if (sb_any_quota_enabled(sb)) {
+			if (sb_any_quota_enabled(sb) ||
+			    sb_any_quota_suspended(sb)) {
 				printk(KERN_ERR "EXT3-fs: Cannot change quota "
 					"options when quota turned on.\n");
 				return 0;
-- 
cgit v1.2.3


From 3850f7a521dc17659ef6758a219f083418788490 Mon Sep 17 00:00:00 2001
From: Duane Griffin <duaneg@dghda.com>
Date: Fri, 25 Jul 2008 01:46:19 -0700
Subject: jbd: replace potentially false assertion with if block

If an error occurs during jbd cache initialisation it is possible for the
journal_head_cache to be NULL when journal_destroy_journal_head_cache is
called.  Replace the J_ASSERT with an if block to handle the situation
correctly.

Note that even with this fix things will break badly if jbd is statically
compiled in and cache initialisation fails.

Signed-off-by: Duane Griffin <duaneg@dghda.com
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/jbd/journal.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index b99c3b3654c..15ea16ad866 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -1636,9 +1636,10 @@ static int journal_init_journal_head_cache(void)
 
 static void journal_destroy_journal_head_cache(void)
 {
-	J_ASSERT(journal_head_cache != NULL);
-	kmem_cache_destroy(journal_head_cache);
-	journal_head_cache = NULL;
+	if (journal_head_cache) {
+		kmem_cache_destroy(journal_head_cache);
+		journal_head_cache = NULL;
+	}
 }
 
 /*
-- 
cgit v1.2.3


From f4d79ca2fa211cffc07306eeed7013448e77d7ec Mon Sep 17 00:00:00 2001
From: Duane Griffin <duaneg@dghda.com>
Date: Fri, 25 Jul 2008 01:46:20 -0700
Subject: jbd: eliminate duplicated code in revocation table init/destroy
 functions

The revocation table initialisation/destruction code is repeated for each
of the two revocation tables stored in the journal.  Refactoring the
duplicated code into functions is tidier, simplifies the logic in
initialisation in particular, and slightly reduces the code size.

There should not be any functional change.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/jbd/revoke.c | 127 +++++++++++++++++++++++---------------------------------
 1 file changed, 51 insertions(+), 76 deletions(-)

diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index 1bb43e987f4..8ff5a7b89b9 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -195,109 +195,84 @@ void journal_destroy_revoke_caches(void)
 	revoke_table_cache = NULL;
 }
 
-/* Initialise the revoke table for a given journal to a given size. */
-
-int journal_init_revoke(journal_t *journal, int hash_size)
+static struct jbd_revoke_table_s *journal_init_revoke_table(int hash_size)
 {
-	int shift, tmp;
+	int shift = 0;
+	int tmp = hash_size;
+	struct jbd_revoke_table_s *table;
 
-	J_ASSERT (journal->j_revoke_table[0] == NULL);
+	table = kmem_cache_alloc(revoke_table_cache, GFP_KERNEL);
+	if (!table)
+		goto out;
 
-	shift = 0;
-	tmp = hash_size;
 	while((tmp >>= 1UL) != 0UL)
 		shift++;
 
-	journal->j_revoke_table[0] = kmem_cache_alloc(revoke_table_cache, GFP_KERNEL);
-	if (!journal->j_revoke_table[0])
-		return -ENOMEM;
-	journal->j_revoke = journal->j_revoke_table[0];
-
-	/* Check that the hash_size is a power of two */
-	J_ASSERT(is_power_of_2(hash_size));
-
-	journal->j_revoke->hash_size = hash_size;
-
-	journal->j_revoke->hash_shift = shift;
-
-	journal->j_revoke->hash_table =
+	table->hash_size = hash_size;
+	table->hash_shift = shift;
+	table->hash_table =
 		kmalloc(hash_size * sizeof(struct list_head), GFP_KERNEL);
-	if (!journal->j_revoke->hash_table) {
-		kmem_cache_free(revoke_table_cache, journal->j_revoke_table[0]);
-		journal->j_revoke = NULL;
-		return -ENOMEM;
+	if (!table->hash_table) {
+		kmem_cache_free(revoke_table_cache, table);
+		table = NULL;
+		goto out;
 	}
 
 	for (tmp = 0; tmp < hash_size; tmp++)
-		INIT_LIST_HEAD(&journal->j_revoke->hash_table[tmp]);
+		INIT_LIST_HEAD(&table->hash_table[tmp]);
 
-	journal->j_revoke_table[1] = kmem_cache_alloc(revoke_table_cache, GFP_KERNEL);
-	if (!journal->j_revoke_table[1]) {
-		kfree(journal->j_revoke_table[0]->hash_table);
-		kmem_cache_free(revoke_table_cache, journal->j_revoke_table[0]);
-		return -ENOMEM;
+out:
+	return table;
+}
+
+static void journal_destroy_revoke_table(struct jbd_revoke_table_s *table)
+{
+	int i;
+	struct list_head *hash_list;
+
+	for (i = 0; i < table->hash_size; i++) {
+		hash_list = &table->hash_table[i];
+		J_ASSERT(list_empty(hash_list));
 	}
 
-	journal->j_revoke = journal->j_revoke_table[1];
+	kfree(table->hash_table);
+	kmem_cache_free(revoke_table_cache, table);
+}
 
-	/* Check that the hash_size is a power of two */
+/* Initialise the revoke table for a given journal to a given size. */
+int journal_init_revoke(journal_t *journal, int hash_size)
+{
+	J_ASSERT(journal->j_revoke_table[0] == NULL);
 	J_ASSERT(is_power_of_2(hash_size));
 
-	journal->j_revoke->hash_size = hash_size;
+	journal->j_revoke_table[0] = journal_init_revoke_table(hash_size);
+	if (!journal->j_revoke_table[0])
+		goto fail0;
 
-	journal->j_revoke->hash_shift = shift;
+	journal->j_revoke_table[1] = journal_init_revoke_table(hash_size);
+	if (!journal->j_revoke_table[1])
+		goto fail1;
 
-	journal->j_revoke->hash_table =
-		kmalloc(hash_size * sizeof(struct list_head), GFP_KERNEL);
-	if (!journal->j_revoke->hash_table) {
-		kfree(journal->j_revoke_table[0]->hash_table);
-		kmem_cache_free(revoke_table_cache, journal->j_revoke_table[0]);
-		kmem_cache_free(revoke_table_cache, journal->j_revoke_table[1]);
-		journal->j_revoke = NULL;
-		return -ENOMEM;
-	}
-
-	for (tmp = 0; tmp < hash_size; tmp++)
-		INIT_LIST_HEAD(&journal->j_revoke->hash_table[tmp]);
+	journal->j_revoke = journal->j_revoke_table[1];
 
 	spin_lock_init(&journal->j_revoke_lock);
 
 	return 0;
-}
 
-/* Destoy a journal's revoke table.  The table must already be empty! */
+fail1:
+	journal_destroy_revoke_table(journal->j_revoke_table[0]);
+fail0:
+	return -ENOMEM;
+}
 
+/* Destroy a journal's revoke table.  The table must already be empty! */
 void journal_destroy_revoke(journal_t *journal)
 {
-	struct jbd_revoke_table_s *table;
-	struct list_head *hash_list;
-	int i;
-
-	table = journal->j_revoke_table[0];
-	if (!table)
-		return;
-
-	for (i=0; i<table->hash_size; i++) {
-		hash_list = &table->hash_table[i];
-		J_ASSERT (list_empty(hash_list));
-	}
-
-	kfree(table->hash_table);
-	kmem_cache_free(revoke_table_cache, table);
-	journal->j_revoke = NULL;
-
-	table = journal->j_revoke_table[1];
-	if (!table)
-		return;
-
-	for (i=0; i<table->hash_size; i++) {
-		hash_list = &table->hash_table[i];
-		J_ASSERT (list_empty(hash_list));
-	}
-
-	kfree(table->hash_table);
-	kmem_cache_free(revoke_table_cache, table);
 	journal->j_revoke = NULL;
+	if (journal->j_revoke_table[0])
+		journal_destroy_revoke_table(journal->j_revoke_table[0]);
+	if (journal->j_revoke_table[1])
+		journal_destroy_revoke_table(journal->j_revoke_table[1]);
 }
 
 
-- 
cgit v1.2.3


From 1984bb763c2e50d0ebfb0cf56d1b319bd7afe63a Mon Sep 17 00:00:00 2001
From: Duane Griffin <duaneg@dghda.com>
Date: Fri, 25 Jul 2008 01:46:21 -0700
Subject: jbd: tidy up revoke cache initialisation and destruction

Make revocation cache destruction safe to call if initialisation fails
partially or entirely.  This allows it to be used to cleanup in the case
of initialisation failure, simplifying that code slightly.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/jbd/revoke.c | 36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index 8ff5a7b89b9..c7bd649bbbd 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -166,33 +166,43 @@ static struct jbd_revoke_record_s *find_revoke_record(journal_t *journal,
 	return NULL;
 }
 
+void journal_destroy_revoke_caches(void)
+{
+	if (revoke_record_cache) {
+		kmem_cache_destroy(revoke_record_cache);
+		revoke_record_cache = NULL;
+	}
+	if (revoke_table_cache) {
+		kmem_cache_destroy(revoke_table_cache);
+		revoke_table_cache = NULL;
+	}
+}
+
 int __init journal_init_revoke_caches(void)
 {
+	J_ASSERT(!revoke_record_cache);
+	J_ASSERT(!revoke_table_cache);
+
 	revoke_record_cache = kmem_cache_create("revoke_record",
 					   sizeof(struct jbd_revoke_record_s),
 					   0,
 					   SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY,
 					   NULL);
 	if (!revoke_record_cache)
-		return -ENOMEM;
+		goto record_cache_failure;
 
 	revoke_table_cache = kmem_cache_create("revoke_table",
 					   sizeof(struct jbd_revoke_table_s),
 					   0, SLAB_TEMPORARY, NULL);
-	if (!revoke_table_cache) {
-		kmem_cache_destroy(revoke_record_cache);
-		revoke_record_cache = NULL;
-		return -ENOMEM;
-	}
+	if (!revoke_table_cache)
+		goto table_cache_failure;
+
 	return 0;
-}
 
-void journal_destroy_revoke_caches(void)
-{
-	kmem_cache_destroy(revoke_record_cache);
-	revoke_record_cache = NULL;
-	kmem_cache_destroy(revoke_table_cache);
-	revoke_table_cache = NULL;
+table_cache_failure:
+	journal_destroy_revoke_caches();
+record_cache_failure:
+	return -ENOMEM;
 }
 
 static struct jbd_revoke_table_s *journal_init_revoke_table(int hash_size)
-- 
cgit v1.2.3


From 9ebfbe9f926553eabc21b4400918d1216b27ed0c Mon Sep 17 00:00:00 2001
From: Shen Feng <shen@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:46:21 -0700
Subject: ext3: improve some code in rb tree part of dir.c

- remove unnecessary code in free_rb_tree_fname
 - rename free_rb_tree_fname to ext3_htree_create_dir_info
   since it and ext3_htree_free_dir_info are a pair
 - replace kmalloc with kzalloc in ext3_htree_free_dir_info

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/dir.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index 8ca3bfd7242..2eea96ec78e 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -272,7 +272,7 @@ static void free_rb_tree_fname(struct rb_root *root)
 
 	while (n) {
 		/* Do the node's children first */
-		if ((n)->rb_left) {
+		if (n->rb_left) {
 			n = n->rb_left;
 			continue;
 		}
@@ -301,24 +301,18 @@ static void free_rb_tree_fname(struct rb_root *root)
 			parent->rb_right = NULL;
 		n = parent;
 	}
-	root->rb_node = NULL;
 }
 
 
-static struct dir_private_info *create_dir_info(loff_t pos)
+static struct dir_private_info *ext3_htree_create_dir_info(loff_t pos)
 {
 	struct dir_private_info *p;
 
-	p = kmalloc(sizeof(struct dir_private_info), GFP_KERNEL);
+	p = kzalloc(sizeof(struct dir_private_info), GFP_KERNEL);
 	if (!p)
 		return NULL;
-	p->root.rb_node = NULL;
-	p->curr_node = NULL;
-	p->extra_fname = NULL;
-	p->last_pos = 0;
 	p->curr_hash = pos2maj_hash(pos);
 	p->curr_minor_hash = pos2min_hash(pos);
-	p->next_hash = 0;
 	return p;
 }
 
@@ -433,7 +427,7 @@ static int ext3_dx_readdir(struct file * filp,
 	int	ret;
 
 	if (!info) {
-		info = create_dir_info(filp->f_pos);
+		info = ext3_htree_create_dir_info(filp->f_pos);
 		if (!info)
 			return -ENOMEM;
 		filp->private_data = info;
-- 
cgit v1.2.3


From 3f31fddfa26b7594b44ff2b34f9a04ba409e0f91 Mon Sep 17 00:00:00 2001
From: Mingming Cao <cmm@us.ibm.com>
Date: Fri, 25 Jul 2008 01:46:22 -0700
Subject: jbd: fix race between free buffer and commit transaction

journal_try_to_free_buffers() could race with jbd commit transaction when
the later is holding the buffer reference while waiting for the data
buffer to flush to disk.  If the caller of journal_try_to_free_buffers()
request tries hard to release the buffers, it will treat the failure as
error and return back to the caller.  We have seen the directo IO failed
due to this race.  Some of the caller of releasepage() also expecting the
buffer to be dropped when passed with GFP_KERNEL mask to the
releasepage()->journal_try_to_free_buffers().

With this patch, if the caller is passing the __GFP_WAIT and __GFP_FS to
indicating this call could wait, in case of try_to_free_buffers() failed,
let's waiting for journal_commit_transaction() to finish commit the
current committing transaction, then try to free those buffers again.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/jbd/transaction.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++--
 mm/filemap.c         |  3 +--
 2 files changed, 56 insertions(+), 4 deletions(-)

diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 67ff2024c23..8dee3200750 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1648,12 +1648,42 @@ out:
 	return;
 }
 
+/*
+ * journal_try_to_free_buffers() could race with journal_commit_transaction()
+ * The latter might still hold the a count on buffers when inspecting
+ * them on t_syncdata_list or t_locked_list.
+ *
+ * journal_try_to_free_buffers() will call this function to
+ * wait for the current transaction to finish syncing data buffers, before
+ * tryinf to free that buffer.
+ *
+ * Called with journal->j_state_lock held.
+ */
+static void journal_wait_for_transaction_sync_data(journal_t *journal)
+{
+	transaction_t *transaction = NULL;
+	tid_t tid;
+
+	spin_lock(&journal->j_state_lock);
+	transaction = journal->j_committing_transaction;
+
+	if (!transaction) {
+		spin_unlock(&journal->j_state_lock);
+		return;
+	}
+
+	tid = transaction->t_tid;
+	spin_unlock(&journal->j_state_lock);
+	log_wait_commit(journal, tid);
+}
 
 /**
  * int journal_try_to_free_buffers() - try to free page buffers.
  * @journal: journal for operation
  * @page: to try and free
- * @unused_gfp_mask: unused
+ * @gfp_mask: we use the mask to detect how hard should we try to release
+ * buffers. If __GFP_WAIT and __GFP_FS is set, we wait for commit code to
+ * release the buffers.
  *
  *
  * For all the buffers on this page,
@@ -1682,9 +1712,11 @@ out:
  * journal_try_to_free_buffer() is changing its state.  But that
  * cannot happen because we never reallocate freed data as metadata
  * while the data is part of a transaction.  Yes?
+ *
+ * Return 0 on failure, 1 on success
  */
 int journal_try_to_free_buffers(journal_t *journal,
-				struct page *page, gfp_t unused_gfp_mask)
+				struct page *page, gfp_t gfp_mask)
 {
 	struct buffer_head *head;
 	struct buffer_head *bh;
@@ -1713,7 +1745,28 @@ int journal_try_to_free_buffers(journal_t *journal,
 		if (buffer_jbd(bh))
 			goto busy;
 	} while ((bh = bh->b_this_page) != head);
+
 	ret = try_to_free_buffers(page);
+
+	/*
+	 * There are a number of places where journal_try_to_free_buffers()
+	 * could race with journal_commit_transaction(), the later still
+	 * holds the reference to the buffers to free while processing them.
+	 * try_to_free_buffers() failed to free those buffers. Some of the
+	 * caller of releasepage() request page buffers to be dropped, otherwise
+	 * treat the fail-to-free as errors (such as generic_file_direct_IO())
+	 *
+	 * So, if the caller of try_to_release_page() wants the synchronous
+	 * behaviour(i.e make sure buffers are dropped upon return),
+	 * let's wait for the current transaction to finish flush of
+	 * dirty data buffers, then try to free those buffers again,
+	 * with the journal locked.
+	 */
+	if (ret == 0 && (gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS)) {
+		journal_wait_for_transaction_sync_data(journal);
+		ret = try_to_free_buffers(page);
+	}
+
 busy:
 	return ret;
 }
diff --git a/mm/filemap.c b/mm/filemap.c
index 7675b91f4f6..5d4c880d7cd 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2563,9 +2563,8 @@ EXPORT_SYMBOL(generic_file_aio_write);
  * Otherwise return zero.
  *
  * The @gfp_mask argument specifies whether I/O may be performed to release
- * this page (__GFP_IO), and whether the call may block (__GFP_WAIT).
+ * this page (__GFP_IO), and whether the call may block (__GFP_WAIT & __GFP_FS).
  *
- * NOTE: @gfp_mask may go away, and this function may become non-blocking.
  */
 int try_to_release_page(struct page *page, gfp_t gfp_mask)
 {
-- 
cgit v1.2.3


From ef1afd39519b74fbe1f63c9ab5a14490effec0e3 Mon Sep 17 00:00:00 2001
From: Shen Feng <shen@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:46:23 -0700
Subject: ext3: remove double definitions of xattr macros

remove the definitions of macros:
XATTR_TRUSTED_PREFIX
XATTR_USER_PREFIX
since they are defined in linux/xattr.h

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/xattr_security.c | 2 +-
 fs/ext3/xattr_trusted.c  | 4 +---
 fs/ext3/xattr_user.c     | 4 +---
 3 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/fs/ext3/xattr_security.c b/fs/ext3/xattr_security.c
index 821efaf2b94..37b81097bdf 100644
--- a/fs/ext3/xattr_security.c
+++ b/fs/ext3/xattr_security.c
@@ -15,7 +15,7 @@ static size_t
 ext3_xattr_security_list(struct inode *inode, char *list, size_t list_size,
 			 const char *name, size_t name_len)
 {
-	const size_t prefix_len = sizeof(XATTR_SECURITY_PREFIX)-1;
+	const size_t prefix_len = XATTR_SECURITY_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 
diff --git a/fs/ext3/xattr_trusted.c b/fs/ext3/xattr_trusted.c
index 0327497a55c..c7c41a410c4 100644
--- a/fs/ext3/xattr_trusted.c
+++ b/fs/ext3/xattr_trusted.c
@@ -13,13 +13,11 @@
 #include <linux/ext3_fs.h>
 #include "xattr.h"
 
-#define XATTR_TRUSTED_PREFIX "trusted."
-
 static size_t
 ext3_xattr_trusted_list(struct inode *inode, char *list, size_t list_size,
 			const char *name, size_t name_len)
 {
-	const size_t prefix_len = sizeof(XATTR_TRUSTED_PREFIX)-1;
+	const size_t prefix_len = XATTR_TRUSTED_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (!capable(CAP_SYS_ADMIN))
diff --git a/fs/ext3/xattr_user.c b/fs/ext3/xattr_user.c
index 1abd8f92c44..430fe63b31b 100644
--- a/fs/ext3/xattr_user.c
+++ b/fs/ext3/xattr_user.c
@@ -12,13 +12,11 @@
 #include <linux/ext3_fs.h>
 #include "xattr.h"
 
-#define XATTR_USER_PREFIX "user."
-
 static size_t
 ext3_xattr_user_list(struct inode *inode, char *list, size_t list_size,
 		     const char *name, size_t name_len)
 {
-	const size_t prefix_len = sizeof(XATTR_USER_PREFIX)-1;
+	const size_t prefix_len = XATTR_USER_PREFIX_LEN;
 	const size_t total_len = prefix_len + name_len + 1;
 
 	if (!test_opt(inode->i_sb, XATTR_USER))
-- 
cgit v1.2.3


From ae76dd9a6b5bbe5315fb7028e03f68f75b8538f3 Mon Sep 17 00:00:00 2001
From: Duane Griffin <duaneg@dghda.com>
Date: Fri, 25 Jul 2008 01:46:23 -0700
Subject: ext3: handle corrupted orphan list at mount

If the orphan node list includes valid, untruncatable nodes with nlink > 0
the ext3_orphan_cleanup loop which attempts to delete them will not do so,
causing it to loop forever. Fix by checking for such nodes in the
ext3_orphan_get function.

This patch fixes the second case (image hdb.20000009.softlockup.gz)
reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: printk warning fix]
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/ialloc.c        |  9 +++++++++
 fs/ext3/inode.c         | 20 ++++++++++++++------
 include/linux/ext3_fs.h |  1 +
 3 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index 77126821b2e..47b678d73e7 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -669,6 +669,14 @@ struct inode *ext3_orphan_get(struct super_block *sb, unsigned long ino)
 	if (IS_ERR(inode))
 		goto iget_failed;
 
+	/*
+	 * If the orphans has i_nlinks > 0 then it should be able to be
+	 * truncated, otherwise it won't be removed from the orphan list
+	 * during processing and an infinite loop will result.
+	 */
+	if (inode->i_nlink && !ext3_can_truncate(inode))
+		goto bad_orphan;
+
 	if (NEXT_ORPHAN(inode) > max_ino)
 		goto bad_orphan;
 	brelse(bitmap_bh);
@@ -690,6 +698,7 @@ bad_orphan:
 		printk(KERN_NOTICE "NEXT_ORPHAN(inode)=%u\n",
 		       NEXT_ORPHAN(inode));
 		printk(KERN_NOTICE "max_ino=%lu\n", max_ino);
+		printk(KERN_NOTICE "i_nlink=%u\n", inode->i_nlink);
 		/* Avoid freeing blocks if we got a bad deleted inode */
 		if (inode->i_nlink == 0)
 			inode->i_blocks = 0;
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 6ae4ecf3ce4..74b432fa166 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2253,6 +2253,19 @@ static void ext3_free_branches(handle_t *handle, struct inode *inode,
 	}
 }
 
+int ext3_can_truncate(struct inode *inode)
+{
+	if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
+		return 0;
+	if (S_ISREG(inode->i_mode))
+		return 1;
+	if (S_ISDIR(inode->i_mode))
+		return 1;
+	if (S_ISLNK(inode->i_mode))
+		return !ext3_inode_is_fast_symlink(inode);
+	return 0;
+}
+
 /*
  * ext3_truncate()
  *
@@ -2297,12 +2310,7 @@ void ext3_truncate(struct inode *inode)
 	unsigned blocksize = inode->i_sb->s_blocksize;
 	struct page *page;
 
-	if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
-	    S_ISLNK(inode->i_mode)))
-		return;
-	if (ext3_inode_is_fast_symlink(inode))
-		return;
-	if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
+	if (!ext3_can_truncate(inode))
 		return;
 
 	/*
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 36c54039637..80171ee89a2 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -832,6 +832,7 @@ extern void ext3_discard_reservation (struct inode *);
 extern void ext3_dirty_inode(struct inode *);
 extern int ext3_change_inode_journal_flag(struct inode *, int);
 extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *);
+extern int ext3_can_truncate(struct inode *inode);
 extern void ext3_truncate (struct inode *);
 extern void ext3_set_inode_flags(struct inode *);
 extern void ext3_get_inode_flags(struct ext3_inode_info *);
-- 
cgit v1.2.3


From 95450f5a7e53d5752ce1a0d0b8282e10fe745ae0 Mon Sep 17 00:00:00 2001
From: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Date: Fri, 25 Jul 2008 01:46:24 -0700
Subject: ext3: don't read inode block if the buffer has a write error

A transient I/O error can corrupt inode data.  Here is the scenario:

(1) update inode_A at the block_B
(2) pdflush writes out new inode_A to the filesystem, but it results
    in write I/O error, at this point, BH_Uptodate flag of the buffer
    for block_B is cleared and BH_Write_EIO is set
(3) create new inode_C which located at block_B, and
    __ext3_get_inode_loc() tries to read on-disk block_B because the
    buffer is not uptodate
(4) if it can read on-disk block_B successfully, inode_A is
    overwritten by old data

This patch makes __ext3_get_inode_loc() not read the inode block if the
buffer has BH_Write_EIO flag.  In this case, the buffer should have the
latest information, so setting the uptodate flag to the buffer (this
avoids WARN_ON_ONCE() in mark_buffer_dirty().)

According to this change, we would need to test BH_Write_EIO flag for the
error checking.  Currently nobody checks write I/O errors on metadata
buffers, but it will be done in other patches I'm working on.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: sugita <yumiko.sugita.yf@hitachi.com>
Cc: Satoshi OSHIMA <satoshi.oshima.fk@hitachi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/inode.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 74b432fa166..36f74f17a11 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2521,6 +2521,16 @@ static int __ext3_get_inode_loc(struct inode *inode,
 	}
 	if (!buffer_uptodate(bh)) {
 		lock_buffer(bh);
+
+		/*
+		 * If the buffer has the write error flag, we have failed
+		 * to write out another inode in the same block.  In this
+		 * case, we don't have to read the block because we may
+		 * read the old inode data successfully.
+		 */
+		if (buffer_write_io_error(bh) && !buffer_uptodate(bh))
+			set_buffer_uptodate(bh);
+
 		if (buffer_uptodate(bh)) {
 			/* someone brought it uptodate while we waited */
 			unlock_buffer(bh);
-- 
cgit v1.2.3


From 3ccc3167b0e5d46ab3bf03e22fbdb7616ce038cd Mon Sep 17 00:00:00 2001
From: Duane Griffin <duaneg@dghda.com>
Date: Fri, 25 Jul 2008 01:46:26 -0700
Subject: ext3: handle deleting corrupted indirect blocks

While freeing indirect blocks we attach a journal head to the parent
buffer head, free the blocks, then journal the parent.  If the indirect
block list is corrupted and points to the parent the journal head will be
detached when the block is cleared, causing an OOPS.

Check for that explicitly and handle it gracefully.

This patch fixes the third case (image hdb.20000057.nullderef.gz)
reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882.

Immediately above the change, in the ext3_free_data function, we call
ext3_clear_blocks to clear the indirect blocks in this parent block.  If
one of those blocks happens to actually be the parent block it will clear
b_private / BH_JBD.

I did the check at the end rather than earlier as it seemed more elegant.
I don't think there should be much practical difference, although it is
possible the FS may not be quite so badly corrupted if we did it the other
way (and didn't clear the block at all).  To be honest, I'm not convinced
there aren't other similar failure modes lurking in this code, although I
couldn't find any with a quick review.

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/inode.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 36f74f17a11..3bf07d70b91 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2127,7 +2127,21 @@ static void ext3_free_data(handle_t *handle, struct inode *inode,
 
 	if (this_bh) {
 		BUFFER_TRACE(this_bh, "call ext3_journal_dirty_metadata");
-		ext3_journal_dirty_metadata(handle, this_bh);
+
+		/*
+		 * The buffer head should have an attached journal head at this
+		 * point. However, if the data is corrupted and an indirect
+		 * block pointed to itself, it would have been detached when
+		 * the block was cleared. Check for this instead of OOPSing.
+		 */
+		if (bh2jh(this_bh))
+			ext3_journal_dirty_metadata(handle, this_bh);
+		else
+			ext3_error(inode->i_sb, "ext3_free_data",
+				   "circular indirect block detected, "
+				   "inode=%lu, block=%llu",
+				   inode->i_ino,
+				   (unsigned long long)this_bh->b_blocknr);
 	}
 }
 
-- 
cgit v1.2.3


From a10320e8f7c4dcfa050aac566092f29b40458d5a Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:46:26 -0700
Subject: jbd: unexport journal_update_superblock

Remove the unused EXPORT_SYMBOL(journal_update_superblock).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/jbd/journal.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 15ea16ad866..aa7143a8349 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -68,7 +68,6 @@ EXPORT_SYMBOL(journal_set_features);
 EXPORT_SYMBOL(journal_create);
 EXPORT_SYMBOL(journal_load);
 EXPORT_SYMBOL(journal_destroy);
-EXPORT_SYMBOL(journal_update_superblock);
 EXPORT_SYMBOL(journal_abort);
 EXPORT_SYMBOL(journal_errno);
 EXPORT_SYMBOL(journal_ack_err);
-- 
cgit v1.2.3


From fc80c44277b3c92d808b73e9d40e120229aa4b6a Mon Sep 17 00:00:00 2001
From: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:46:29 -0700
Subject: jbd: positively dispose the unmapped data buffers in
 journal_commit_transaction()

After ext3-ordered files are truncated, there is a possibility that the
pages which cannot be estimated still remain.  Remaining pages can be
released when the system has really few memory.  So, it is not memory
leakage.  But the resource management software etc.  may not work
correctly.

It is possible that journal_unmap_buffer() cannot release the buffers, and
the pages to which they belong because they are attached to a commiting
transaction and journal_unmap_buffer() cannot release them.  To release
such the buffers and the pages later, journal_unmap_buffer() leaves it to
journal_commit_transaction().  (journal_unmap_buffer() puts the mark
'BH_Freed' to the buffers so that journal_commit_transaction() can
identify whether they can be released or not.)

In the journalled mode and the writeback mode, jbd does with only metadata
buffers.  But in the ordered mode, jbd does with metadata buffers and also
data buffers.

Actually, journal_commit_transaction() releases only the metadata buffers
of which release is demanded by journal_unmap_buffer(), and also releases
the pages to which they belong if possible.

As a result, the data buffers of which release is demanded by
journal_unmap_buffer() remain after a transaction commits.  And also the
pages to which they belong remain.

Such the remained pages don't have mapping any longer.  Due to this fact,
there is a possibility that the pages which cannot be estimated remain.

The metadata buffers marked 'BH_Freed' and the pages to which
they belong can be released at 'JBD: commit phase 7'.

Therefore, by applying the same code into 'JBD: commit phase 2' (where the
data buffers are done with), journal_commit_transaction() can also release
the data buffers marked 'BH_Freed' and the pages to which they belong.

As a result, all the buffers marked 'BH_Freed' can be released, and also
all the pages to which these buffers belong can be released at
journal_commit_transaction().  So, the page which cannot be estimated is
lost.

<<Excerpt of code at 'JBD: commit phase 7'>>
 >         spin_lock(&journal->j_list_lock);
 >         while (commit_transaction->t_forget) {
 >                 transaction_t *cp_transaction;
 >                 struct buffer_head *bh;
 >
 >                 jh = commit_transaction->t_forget;
 >...
 >                 if (buffer_freed(bh)) {
 >                 ^^^^^^^^^^^^^^^^^^^^^^^^
 >                         clear_buffer_freed(bh);
 >                        ^^^^^^^^^^^^^^^^^^^^^^^^
 >                         clear_buffer_jbddirty(bh);
 >                 }
 >
 >                 if (buffer_jbddirty(bh)) {
 >                         JBUFFER_TRACE(jh, "add to new checkpointing trans");
 >                         __journal_insert_checkpoint(jh, commit_transaction);
 >                         JBUFFER_TRACE(jh, "refile for checkpoint writeback");
 >                         __journal_refile_buffer(jh);
 >                         jbd_unlock_bh_state(bh);
 >                 } else {
 >                         J_ASSERT_BH(bh, !buffer_dirty(bh));
 > ...
 >                         JBUFFER_TRACE(jh, "refile or unfile freed buffer");
 >                         __journal_refile_buffer(jh);
 >                         if (!jh->b_transaction) {
 >                                 jbd_unlock_bh_state(bh);
 >                                  /* needs a brelse */
 >                                 journal_remove_journal_head(bh);
 >                                 release_buffer_page(bh);
 >                                 ^^^^^^^^^^^^^^^^^^^^^^^^
 >                         } else
 >                 }
****************************************************************
* Apply the code of "^^^^^^" lines into 'JBD: commit phase 2' *
****************************************************************

At journal_commit_transaction() code, there is one extra message in the
series of jbd debug messages.  ("JBD: commit phase 2") This patch fixes
it, too.

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/jbd/commit.c | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index 5a8ca61498c..f943b9b3f20 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -36,7 +36,7 @@ static void journal_end_buffer_io_sync(struct buffer_head *bh, int uptodate)
 
 /*
  * When an ext3-ordered file is truncated, it is possible that many pages are
- * not sucessfully freed, because they are attached to a committing transaction.
+ * not successfully freed, because they are attached to a committing transaction.
  * After the transaction commits, these pages are left on the LRU, with no
  * ->mapping, and with attached buffers.  These pages are trivially reclaimable
  * by the VM, but their apparent absence upsets the VM accounting, and it makes
@@ -45,8 +45,8 @@ static void journal_end_buffer_io_sync(struct buffer_head *bh, int uptodate)
  * So here, we have a buffer which has just come off the forget list.  Look to
  * see if we can strip all buffers from the backing page.
  *
- * Called under lock_journal(), and possibly under journal_datalist_lock.  The
- * caller provided us with a ref against the buffer, and we drop that here.
+ * Called under journal->j_list_lock.  The caller provided us with a ref
+ * against the buffer, and we drop that here.
  */
 static void release_buffer_page(struct buffer_head *bh)
 {
@@ -77,6 +77,19 @@ nope:
 	__brelse(bh);
 }
 
+/*
+ * Decrement reference counter for data buffer. If it has been marked
+ * 'BH_Freed', release it and the page to which it belongs if possible.
+ */
+static void release_data_buffer(struct buffer_head *bh)
+{
+	if (buffer_freed(bh)) {
+		clear_buffer_freed(bh);
+		release_buffer_page(bh);
+	} else
+		put_bh(bh);
+}
+
 /*
  * Try to acquire jbd_lock_bh_state() against the buffer, when j_list_lock is
  * held.  For ranking reasons we must trylock.  If we lose, schedule away and
@@ -231,7 +244,7 @@ write_out_data:
 			if (locked)
 				unlock_buffer(bh);
 			BUFFER_TRACE(bh, "already cleaned up");
-			put_bh(bh);
+			release_data_buffer(bh);
 			continue;
 		}
 		if (locked && test_clear_buffer_dirty(bh)) {
@@ -258,10 +271,10 @@ write_out_data:
 			if (locked)
 				unlock_buffer(bh);
 			journal_remove_journal_head(bh);
-			/* Once for our safety reference, once for
+			/* One for our safety reference, other for
 			 * journal_remove_journal_head() */
 			put_bh(bh);
-			put_bh(bh);
+			release_data_buffer(bh);
 		}
 
 		if (need_resched() || spin_needbreak(&journal->j_list_lock)) {
@@ -443,7 +456,7 @@ void journal_commit_transaction(journal_t *journal)
 		} else {
 			jbd_unlock_bh_state(bh);
 		}
-		put_bh(bh);
+		release_data_buffer(bh);
 		cond_resched_lock(&journal->j_list_lock);
 	}
 	spin_unlock(&journal->j_list_lock);
@@ -453,8 +466,6 @@ void journal_commit_transaction(journal_t *journal)
 
 	journal_write_revoke_records(journal, commit_transaction);
 
-	jbd_debug(3, "JBD: commit phase 2\n");
-
 	/*
 	 * If we found any dirty or locked buffers, then we should have
 	 * looped back up to the write_out_data label.  If there weren't
-- 
cgit v1.2.3


From 8ef2720397bb813d4985405a5ae7b8ad6474188b Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:46:29 -0700
Subject: ext3: kill 2 useless magic numbers

dx_root_limit() will never return 20, and I can't figure out what 20
stands for.  This function has never changed since htree directory
indexing was merged.

Similar for dx_node_limit() and the magic 22.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/namei.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 0b8cf80154f..d282ea87008 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -240,13 +240,13 @@ static inline unsigned dx_root_limit (struct inode *dir, unsigned infosize)
 {
 	unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(1) -
 		EXT3_DIR_REC_LEN(2) - infosize;
-	return 0? 20: entry_space / sizeof(struct dx_entry);
+	return entry_space / sizeof(struct dx_entry);
 }
 
 static inline unsigned dx_node_limit (struct inode *dir)
 {
 	unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(0);
-	return 0? 22: entry_space / sizeof(struct dx_entry);
+	return entry_space / sizeof(struct dx_entry);
 }
 
 /*
-- 
cgit v1.2.3


From cbe5f466f6995e10a10c7ae66d6dc8608f08a6b8 Mon Sep 17 00:00:00 2001
From: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Date: Fri, 25 Jul 2008 01:46:30 -0700
Subject: jbd: don't abort if flushing file data failed

In ordered mode, the current jbd aborts the journal if a file data buffer
has an error.  But this behavior is unintended, and we found that it has
been adopted accidentally.

This patch undoes it and just calls printk() instead of aborting the
journal.  Additionally, set AS_EIO into the address_space object of the
failed buffer which is submitted by journal_do_submit_data() so that
fsync() can get -EIO.

Missing error checkings are also added to inform errors on file data
buffers to the user.  The following buffers are targeted.

  (a) the buffer which has already been written out by pdflush
  (b) the buffer which has been unlocked before scanned in the
      t_locked_list loop

[akpm@linux-foundation.org: improve grammar in a printk]
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/jbd/commit.c | 35 ++++++++++++++++++++++++++++-------
 1 file changed, 28 insertions(+), 7 deletions(-)

diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index f943b9b3f20..2eccbfaa1d4 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -185,7 +185,7 @@ static void journal_do_submit_data(struct buffer_head **wbuf, int bufs)
 /*
  *  Submit all the data buffers to disk
  */
-static void journal_submit_data_buffers(journal_t *journal,
+static int journal_submit_data_buffers(journal_t *journal,
 				transaction_t *commit_transaction)
 {
 	struct journal_head *jh;
@@ -193,6 +193,7 @@ static void journal_submit_data_buffers(journal_t *journal,
 	int locked;
 	int bufs = 0;
 	struct buffer_head **wbuf = journal->j_wbuf;
+	int err = 0;
 
 	/*
 	 * Whenever we unlock the journal and sleep, things can get added
@@ -266,6 +267,8 @@ write_out_data:
 			put_bh(bh);
 		} else {
 			BUFFER_TRACE(bh, "writeout complete: unfile");
+			if (unlikely(!buffer_uptodate(bh)))
+				err = -EIO;
 			__journal_unfile_buffer(jh);
 			jbd_unlock_bh_state(bh);
 			if (locked)
@@ -284,6 +287,8 @@ write_out_data:
 	}
 	spin_unlock(&journal->j_list_lock);
 	journal_do_submit_data(wbuf, bufs);
+
+	return err;
 }
 
 /*
@@ -423,8 +428,7 @@ void journal_commit_transaction(journal_t *journal)
 	 * Now start flushing things to disk, in the order they appear
 	 * on the transaction lists.  Data blocks go first.
 	 */
-	err = 0;
-	journal_submit_data_buffers(journal, commit_transaction);
+	err = journal_submit_data_buffers(journal, commit_transaction);
 
 	/*
 	 * Wait for all previously submitted IO to complete.
@@ -439,10 +443,21 @@ void journal_commit_transaction(journal_t *journal)
 		if (buffer_locked(bh)) {
 			spin_unlock(&journal->j_list_lock);
 			wait_on_buffer(bh);
-			if (unlikely(!buffer_uptodate(bh)))
-				err = -EIO;
 			spin_lock(&journal->j_list_lock);
 		}
+		if (unlikely(!buffer_uptodate(bh))) {
+			if (TestSetPageLocked(bh->b_page)) {
+				spin_unlock(&journal->j_list_lock);
+				lock_page(bh->b_page);
+				spin_lock(&journal->j_list_lock);
+			}
+			if (bh->b_page->mapping)
+				set_bit(AS_EIO, &bh->b_page->mapping->flags);
+
+			unlock_page(bh->b_page);
+			SetPageError(bh->b_page);
+			err = -EIO;
+		}
 		if (!inverted_lock(journal, bh)) {
 			put_bh(bh);
 			spin_lock(&journal->j_list_lock);
@@ -461,8 +476,14 @@ void journal_commit_transaction(journal_t *journal)
 	}
 	spin_unlock(&journal->j_list_lock);
 
-	if (err)
-		journal_abort(journal, err);
+	if (err) {
+		char b[BDEVNAME_SIZE];
+
+		printk(KERN_WARNING
+			"JBD: Detected IO errors while flushing file data "
+			"on %s\n", bdevname(journal->j_fs_dev, b));
+		err = 0;
+	}
 
 	journal_write_revoke_records(journal, commit_transaction);
 
-- 
cgit v1.2.3


From 275c0a8f1253a7542ad9726956c918d8a1f694c4 Mon Sep 17 00:00:00 2001
From: Duane Griffin <duaneg@dghda.com>
Date: Fri, 25 Jul 2008 01:46:31 -0700
Subject: ext3: validate directory entry data before use

ext3_dx_find_entry uses ext3_next_entry without verifying that the entry
is valid.  If its rec_len == 0 this causes an infinite loop.  Refactor the
loop to check the validity of entries before checking whether they match
and moving onto the next one.

There are other uses of ext3_next_entry in this file which also look
problematic.  They should be reviewed and fixed if/when we have a
test-case that triggers them.

This patch fixes the first case (image hdb.25.softlockup.gz) reported in
http://bugzilla.kernel.org/show_bug.cgi?id=10882.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext3/namei.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index d282ea87008..de13e919cd8 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -991,19 +991,21 @@ static struct buffer_head * ext3_dx_find_entry(struct dentry *dentry,
 		de = (struct ext3_dir_entry_2 *) bh->b_data;
 		top = (struct ext3_dir_entry_2 *) ((char *) de + sb->s_blocksize -
 				       EXT3_DIR_REC_LEN(0));
-		for (; de < top; de = ext3_next_entry(de))
-		if (ext3_match (namelen, name, de)) {
-			if (!ext3_check_dir_entry("ext3_find_entry",
-						  dir, de, bh,
-				  (block<<EXT3_BLOCK_SIZE_BITS(sb))
-					  +((char *)de - bh->b_data))) {
-				brelse (bh);
+		for (; de < top; de = ext3_next_entry(de)) {
+			int off = (block << EXT3_BLOCK_SIZE_BITS(sb))
+				  + ((char *) de - bh->b_data);
+
+			if (!ext3_check_dir_entry(__func__, dir, de, bh, off)) {
+				brelse(bh);
 				*err = ERR_BAD_DX_DIR;
 				goto errout;
 			}
-			*res_dir = de;
-			dx_release (frames);
-			return bh;
+
+			if (ext3_match(namelen, name, de)) {
+				*res_dir = de;
+				dx_release(frames);
+				return bh;
+			}
 		}
 		brelse (bh);
 		/* Check to see if we should continue to search */
-- 
cgit v1.2.3


From c0a1633b6201ef79e31b7da464d44fdf5953054d Mon Sep 17 00:00:00 2001
From: Adam Greenblatt <adam.greenblatt@gmail.com>
Date: Fri, 25 Jul 2008 01:46:32 -0700
Subject: isofs: fix minor filesystem corruption

Some iso9660 images contain files with rockridge data that is either
incorrect or incompletely parsed.  Prior to commit
f2966632a134e865db3c819346a1dc7d96e05309 ("[PATCH] rock: handle directory
overflows") (included with kernel 2.6.13) the kernel ignored the rockridge
data for these files, while still allowing the files to be accessed under
their non-rockridge names.  That commit inadvertently changed things so
that files with invalid rockridge data could not be accessed at all.  (I
ran across the problem when comparing some old CDs with hard disk copies I
had made long ago under kernel 2.4: a few of the files on the hard disk
copies were no longer visible on the CDs.)

This change reverts to the pre-2.6.13 behavior.

Signed-off-by: Adam Greenblatt <adam.greenblatt@gmail.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/isofs/rock.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/fs/isofs/rock.c b/fs/isofs/rock.c
index 6bd48f0a704..c2fb2dd0131 100644
--- a/fs/isofs/rock.c
+++ b/fs/isofs/rock.c
@@ -209,6 +209,11 @@ repeat:
 
 	while (rs.len > 2) { /* There may be one byte for padding somewhere */
 		rr = (struct rock_ridge *)rs.chr;
+		/*
+		 * Ignore rock ridge info if rr->len is out of range, but
+		 * don't return -EIO because that would make the file
+		 * invisible.
+		 */
 		if (rr->len < 3)
 			goto out;	/* Something got screwed up here */
 		sig = isonum_721(rs.chr);
@@ -216,8 +221,12 @@ repeat:
 			goto eio;
 		rs.chr += rr->len;
 		rs.len -= rr->len;
+		/*
+		 * As above, just ignore the rock ridge info if rr->len
+		 * is bogus.
+		 */
 		if (rs.len < 0)
-			goto eio;	/* corrupted isofs */
+			goto out;	/* Something got screwed up here */
 
 		switch (sig) {
 		case SIG('R', 'R'):
@@ -307,6 +316,11 @@ parse_rock_ridge_inode_internal(struct iso_directory_record *de,
 repeat:
 	while (rs.len > 2) { /* There may be one byte for padding somewhere */
 		rr = (struct rock_ridge *)rs.chr;
+		/*
+		 * Ignore rock ridge info if rr->len is out of range, but
+		 * don't return -EIO because that would make the file
+		 * invisible.
+		 */
 		if (rr->len < 3)
 			goto out;	/* Something got screwed up here */
 		sig = isonum_721(rs.chr);
@@ -314,8 +328,12 @@ repeat:
 			goto eio;
 		rs.chr += rr->len;
 		rs.len -= rr->len;
+		/*
+		 * As above, just ignore the rock ridge info if rr->len
+		 * is bogus.
+		 */
 		if (rs.len < 0)
-			goto eio;	/* corrupted isofs */
+			goto out;	/* Something got screwed up here */
 
 		switch (sig) {
 #ifndef CONFIG_ZISOFS		/* No flag for SF or ZF */
-- 
cgit v1.2.3


From de0ca06a99c33df8333955642843331ab6b6e7ff Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:46:34 -0700
Subject: coda: remove CODA_FS_OLD_API

While fixing CONFIG_ leakages to the userspace kernel headers I ran into
CODA_FS_OLD_API.

After five years, are there still people using the old API left?
Especially considering that you have to choose at compile time which API
to support in the kernel (and distributions tend to offer the new API for
some time).

Jan: "The old API can definitely go.  Around the time the new
      interface went in there were some non-Coda userspace file system
      implementations that took a while longer to convert to the new API,
      but by now they all switched to the new interface or in some cases
      to a FUSE-based solution."

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/Kconfig           | 14 --------------
 fs/coda/coda_linux.c |  6 ++----
 fs/coda/psdev.c      |  4 ----
 fs/coda/upcall.c     | 15 +--------------
 include/linux/coda.h | 43 -------------------------------------------
 5 files changed, 3 insertions(+), 79 deletions(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index 37db79a2ff9..ed563b9e352 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -2093,20 +2093,6 @@ config CODA_FS
 	  To compile the coda client support as a module, choose M here: the
 	  module will be called coda.
 
-config CODA_FS_OLD_API
-	bool "Use 96-bit Coda file identifiers"
-	depends on CODA_FS
-	help
-	  A new kernel-userspace API had to be introduced for Coda v6.0
-	  to support larger 128-bit file identifiers as needed by the
-	  new realms implementation.
-
-	  However this new API is not backward compatible with older
-	  clients. If you really need to run the old Coda userspace
-	  cache manager then say Y.
-
-	  For most cases you probably want to say N.
-
 config AFS_FS
 	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
 	depends on INET && EXPERIMENTAL
diff --git a/fs/coda/coda_linux.c b/fs/coda/coda_linux.c
index e1c854890f9..bf4a3fd3c8e 100644
--- a/fs/coda/coda_linux.c
+++ b/fs/coda/coda_linux.c
@@ -28,11 +28,9 @@ int coda_fake_statfs;
 char * coda_f2s(struct CodaFid *f)
 {
 	static char s[60];
-#ifdef CONFIG_CODA_FS_OLD_API
- 	sprintf(s, "(%08x.%08x.%08x)", f->opaque[0], f->opaque[1], f->opaque[2]);
-#else
+
  	sprintf(s, "(%08x.%08x.%08x.%08x)", f->opaque[0], f->opaque[1], f->opaque[2], f->opaque[3]);
-#endif
+
 	return s;
 }
 
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index 40c36f7352a..0d9b80ec689 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -378,11 +378,7 @@ MODULE_AUTHOR("Jan Harkes, Peter J. Braam");
 MODULE_DESCRIPTION("Coda Distributed File System VFS interface");
 MODULE_ALIAS_CHARDEV_MAJOR(CODA_PSDEV_MAJOR);
 MODULE_LICENSE("GPL");
-#ifdef CONFIG_CODA_FS_OLD_API
-MODULE_VERSION("5.3.21");
-#else
 MODULE_VERSION("6.6");
-#endif
 
 static int __init init_coda(void)
 {
diff --git a/fs/coda/upcall.c b/fs/coda/upcall.c
index 359e531094d..ce432bca95d 100644
--- a/fs/coda/upcall.c
+++ b/fs/coda/upcall.c
@@ -52,12 +52,8 @@ static void *alloc_upcall(int opcode, int size)
         inp->ih.opcode = opcode;
 	inp->ih.pid = current->pid;
 	inp->ih.pgid = task_pgrp_nr(current);
-#ifdef CONFIG_CODA_FS_OLD_API
-	memset(&inp->ih.cred, 0, sizeof(struct coda_cred));
-	inp->ih.cred.cr_fsuid = current->fsuid;
-#else
 	inp->ih.uid = current->fsuid;
-#endif
+
 	return (void*)inp;
 }
 
@@ -166,20 +162,11 @@ int venus_close(struct super_block *sb, struct CodaFid *fid, int flags,
 	union inputArgs *inp;
 	union outputArgs *outp;
 	int insize, outsize, error;
-#ifdef CONFIG_CODA_FS_OLD_API
-	struct coda_cred cred = { 0, };
-	cred.cr_fsuid = uid;
-#endif
 	
 	insize = SIZE(release);
 	UPARG(CODA_CLOSE);
 	
-#ifdef CONFIG_CODA_FS_OLD_API
-	memcpy(&(inp->ih.cred), &cred, sizeof(cred));
-#else
 	inp->ih.uid = uid;
-#endif
-	
         inp->coda_close.VFid = *fid;
         inp->coda_close.flags = flags;
 
diff --git a/include/linux/coda.h b/include/linux/coda.h
index b5cf0780c51..96c87693800 100644
--- a/include/linux/coda.h
+++ b/include/linux/coda.h
@@ -199,28 +199,6 @@ typedef u_int32_t vuid_t;
 typedef u_int32_t vgid_t;
 #endif /*_VUID_T_ */
 
-#ifdef CONFIG_CODA_FS_OLD_API
-struct CodaFid {
-	u_int32_t opaque[3];
-};
-
-static __inline__ ino_t  coda_f2i(struct CodaFid *fid)
-{
-	if ( ! fid ) 
-		return 0; 
-	if (fid->opaque[1] == 0xfffffffe || fid->opaque[1] == 0xffffffff)
-		return ((fid->opaque[0] << 20) | (fid->opaque[2] & 0xfffff));
-	else
-		return (fid->opaque[2] + (fid->opaque[1]<<10) + (fid->opaque[0]<<20));
-}
-
-struct coda_cred {
-    vuid_t cr_uid, cr_euid, cr_suid, cr_fsuid; /* Real, efftve, set, fs uid*/
-    vgid_t cr_groupid, cr_egid, cr_sgid, cr_fsgid; /* same for groups */
-};
-
-#else /* not defined(CONFIG_CODA_FS_OLD_API) */
-
 struct CodaFid {
 	u_int32_t opaque[4];
 };
@@ -228,8 +206,6 @@ struct CodaFid {
 #define coda_f2i(fid)\
 	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
 
-#endif
-
 #ifndef _VENUS_VATTR_T_
 #define _VENUS_VATTR_T_
 /*
@@ -313,15 +289,7 @@ struct coda_statfs {
 
 #define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
 
-#if 0
-#define CODA_KERNEL_VERSION 0 /* don't care about kernel version number */
-#define CODA_KERNEL_VERSION 1 /* The old venus 4.6 compatible interface */
-#endif
-#ifdef CONFIG_CODA_FS_OLD_API
-#define CODA_KERNEL_VERSION 2 /* venus_lookup got an extra parameter */
-#else
 #define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
-#endif
 
 /*
  *        Venus <-> Coda  RPC arguments
@@ -329,16 +297,9 @@ struct coda_statfs {
 struct coda_in_hdr {
     u_int32_t opcode;
     u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
-#ifdef CONFIG_CODA_FS_OLD_API
-    u_int16_t pid;	    /* Common to all */
-    u_int16_t pgid;	    /* Common to all */
-    u_int16_t sid;          /* Common to all */
-    struct coda_cred cred;  /* Common to all */
-#else
     pid_t pid;
     pid_t pgid;
     vuid_t uid;
-#endif
 };
 
 /* Really important that opcode and unique are 1st two fields! */
@@ -613,11 +574,7 @@ struct coda_vget_out {
 /* CODA_PURGEUSER is a venus->kernel call */
 struct coda_purgeuser_out {
     struct coda_out_hdr oh;
-#ifdef CONFIG_CODA_FS_OLD_API
-    struct coda_cred cred;
-#else
     vuid_t uid;
-#endif
 };
 
 /* coda_zapfile: */
-- 
cgit v1.2.3


From 3084b72de73a6f8af0f16989ffb348068bd066d4 Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <matthias@kaehlcke.net>
Date: Fri, 25 Jul 2008 01:46:34 -0700
Subject: hfs: convert bitmap_lock in a mutex

Apple Macintosh file system: The semaphore bitmap_lock is used as a mutex.
Convert it to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hfs/bitmap.c | 8 ++++----
 fs/hfs/hfs_fs.h | 3 ++-
 fs/hfs/super.c  | 2 +-
 3 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/fs/hfs/bitmap.c b/fs/hfs/bitmap.c
index 24e75798ddf..c6e97366e8a 100644
--- a/fs/hfs/bitmap.c
+++ b/fs/hfs/bitmap.c
@@ -145,7 +145,7 @@ u32 hfs_vbm_search_free(struct super_block *sb, u32 goal, u32 *num_bits)
 	if (!*num_bits)
 		return 0;
 
-	down(&HFS_SB(sb)->bitmap_lock);
+	mutex_lock(&HFS_SB(sb)->bitmap_lock);
 	bitmap = HFS_SB(sb)->bitmap;
 
 	pos = hfs_find_set_zero_bits(bitmap, HFS_SB(sb)->fs_ablocks, goal, num_bits);
@@ -162,7 +162,7 @@ u32 hfs_vbm_search_free(struct super_block *sb, u32 goal, u32 *num_bits)
 	HFS_SB(sb)->free_ablocks -= *num_bits;
 	hfs_bitmap_dirty(sb);
 out:
-	up(&HFS_SB(sb)->bitmap_lock);
+	mutex_unlock(&HFS_SB(sb)->bitmap_lock);
 	return pos;
 }
 
@@ -205,7 +205,7 @@ int hfs_clear_vbm_bits(struct super_block *sb, u16 start, u16 count)
 	if ((start + count) > HFS_SB(sb)->fs_ablocks)
 		return -2;
 
-	down(&HFS_SB(sb)->bitmap_lock);
+	mutex_lock(&HFS_SB(sb)->bitmap_lock);
 	/* bitmap is always on a 32-bit boundary */
 	curr = HFS_SB(sb)->bitmap + (start / 32);
 	len = count;
@@ -236,7 +236,7 @@ int hfs_clear_vbm_bits(struct super_block *sb, u16 start, u16 count)
 	}
 out:
 	HFS_SB(sb)->free_ablocks += len;
-	up(&HFS_SB(sb)->bitmap_lock);
+	mutex_unlock(&HFS_SB(sb)->bitmap_lock);
 	hfs_bitmap_dirty(sb);
 
 	return 0;
diff --git a/fs/hfs/hfs_fs.h b/fs/hfs/hfs_fs.h
index 147374b6f67..ad652881911 100644
--- a/fs/hfs/hfs_fs.h
+++ b/fs/hfs/hfs_fs.h
@@ -11,6 +11,7 @@
 
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/mutex.h>
 #include <linux/buffer_head.h>
 #include <linux/fs.h>
 
@@ -139,7 +140,7 @@ struct hfs_sb_info {
 
 	struct nls_table *nls_io, *nls_disk;
 
-	struct semaphore bitmap_lock;
+	struct mutex bitmap_lock;
 
 	unsigned long flags;
 
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 8cf67974adf..ac2ec5ef66e 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -372,7 +372,7 @@ static int hfs_fill_super(struct super_block *sb, void *data, int silent)
 
 	sb->s_op = &hfs_super_operations;
 	sb->s_flags |= MS_NODIRATIME;
-	init_MUTEX(&sbi->bitmap_lock);
+	mutex_init(&sbi->bitmap_lock);
 
 	res = hfs_mdb_get(sb);
 	if (res) {
-- 
cgit v1.2.3


From 39f8d472f280dee6503a364d1d911b9e20ce3ec9 Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <matthias@kaehlcke.net>
Date: Fri, 25 Jul 2008 01:46:35 -0700
Subject: hfs: convert extents_lock in a mutex

Apple Macintosh file system: The semaphore extens_lock is used as a mutex.
Convert it to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hfs/btree.c  |  2 +-
 fs/hfs/extent.c | 14 +++++++-------
 fs/hfs/hfs_fs.h |  2 +-
 fs/hfs/inode.c  |  4 ++--
 4 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index f6621a78520..9b9d6395bad 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -40,7 +40,7 @@ struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id, btree_keycmp ke
 	{
 	struct hfs_mdb *mdb = HFS_SB(sb)->mdb;
 	HFS_I(tree->inode)->flags = 0;
-	init_MUTEX(&HFS_I(tree->inode)->extents_lock);
+	mutex_init(&HFS_I(tree->inode)->extents_lock);
 	switch (id) {
 	case HFS_EXT_CNID:
 		hfs_inode_read_fork(tree->inode, mdb->drXTExtRec, mdb->drXTFlSize,
diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index c176f67ba0a..2c16316d291 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -343,16 +343,16 @@ int hfs_get_block(struct inode *inode, sector_t block,
 		goto done;
 	}
 
-	down(&HFS_I(inode)->extents_lock);
+	mutex_lock(&HFS_I(inode)->extents_lock);
 	res = hfs_ext_read_extent(inode, ablock);
 	if (!res)
 		dblock = hfs_ext_find_block(HFS_I(inode)->cached_extents,
 					    ablock - HFS_I(inode)->cached_start);
 	else {
-		up(&HFS_I(inode)->extents_lock);
+		mutex_unlock(&HFS_I(inode)->extents_lock);
 		return -EIO;
 	}
-	up(&HFS_I(inode)->extents_lock);
+	mutex_unlock(&HFS_I(inode)->extents_lock);
 
 done:
 	map_bh(bh_result, sb, HFS_SB(sb)->fs_start +
@@ -375,7 +375,7 @@ int hfs_extend_file(struct inode *inode)
 	u32 start, len, goal;
 	int res;
 
-	down(&HFS_I(inode)->extents_lock);
+	mutex_lock(&HFS_I(inode)->extents_lock);
 	if (HFS_I(inode)->alloc_blocks == HFS_I(inode)->first_blocks)
 		goal = hfs_ext_lastblock(HFS_I(inode)->first_extents);
 	else {
@@ -425,7 +425,7 @@ int hfs_extend_file(struct inode *inode)
 			goto insert_extent;
 	}
 out:
-	up(&HFS_I(inode)->extents_lock);
+	mutex_unlock(&HFS_I(inode)->extents_lock);
 	if (!res) {
 		HFS_I(inode)->alloc_blocks += len;
 		mark_inode_dirty(inode);
@@ -487,7 +487,7 @@ void hfs_file_truncate(struct inode *inode)
 	if (blk_cnt == alloc_cnt)
 		goto out;
 
-	down(&HFS_I(inode)->extents_lock);
+	mutex_lock(&HFS_I(inode)->extents_lock);
 	hfs_find_init(HFS_SB(sb)->ext_tree, &fd);
 	while (1) {
 		if (alloc_cnt == HFS_I(inode)->first_blocks) {
@@ -514,7 +514,7 @@ void hfs_file_truncate(struct inode *inode)
 		hfs_brec_remove(&fd);
 	}
 	hfs_find_exit(&fd);
-	up(&HFS_I(inode)->extents_lock);
+	mutex_unlock(&HFS_I(inode)->extents_lock);
 
 	HFS_I(inode)->alloc_blocks = blk_cnt;
 out:
diff --git a/fs/hfs/hfs_fs.h b/fs/hfs/hfs_fs.h
index ad652881911..9955232fdf8 100644
--- a/fs/hfs/hfs_fs.h
+++ b/fs/hfs/hfs_fs.h
@@ -54,7 +54,7 @@ struct hfs_inode_info {
 	struct list_head open_dir_list;
 	struct inode *rsrc_inode;
 
-	struct semaphore extents_lock;
+	struct mutex extents_lock;
 
 	u16 alloc_blocks, clump_blocks;
 	sector_t fs_blocks;
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 97f8446c4ff..dc4ec640e87 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -150,7 +150,7 @@ struct inode *hfs_new_inode(struct inode *dir, struct qstr *name, int mode)
 	if (!inode)
 		return NULL;
 
-	init_MUTEX(&HFS_I(inode)->extents_lock);
+	mutex_init(&HFS_I(inode)->extents_lock);
 	INIT_LIST_HEAD(&HFS_I(inode)->open_dir_list);
 	hfs_cat_build_key(sb, (btree_key *)&HFS_I(inode)->cat_key, dir->i_ino, name);
 	inode->i_ino = HFS_SB(sb)->next_id++;
@@ -281,7 +281,7 @@ static int hfs_read_inode(struct inode *inode, void *data)
 
 	HFS_I(inode)->flags = 0;
 	HFS_I(inode)->rsrc_inode = NULL;
-	init_MUTEX(&HFS_I(inode)->extents_lock);
+	mutex_init(&HFS_I(inode)->extents_lock);
 	INIT_LIST_HEAD(&HFS_I(inode)->open_dir_list);
 
 	/* Initialize the inode */
-- 
cgit v1.2.3


From 895c23f8c39c0c8d7b536bb2566d4aa968d78be2 Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <matthias@kaehlcke.net>
Date: Fri, 25 Jul 2008 01:46:36 -0700
Subject: hfsplus: convert the extents_lock in a mutex

Apple Extended HFS file system: The semaphore extents lock is used as a
mutex.  Convert it to the mutex API.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hfsplus/extents.c    | 14 +++++++-------
 fs/hfsplus/hfsplus_fs.h |  3 ++-
 fs/hfsplus/inode.c      |  4 ++--
 fs/hfsplus/super.c      |  2 +-
 4 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c
index 12e899cd788..fec8f61227f 100644
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -199,16 +199,16 @@ int hfsplus_get_block(struct inode *inode, sector_t iblock,
 		goto done;
 	}
 
-	down(&HFSPLUS_I(inode).extents_lock);
+	mutex_lock(&HFSPLUS_I(inode).extents_lock);
 	res = hfsplus_ext_read_extent(inode, ablock);
 	if (!res) {
 		dblock = hfsplus_ext_find_block(HFSPLUS_I(inode).cached_extents, ablock -
 					     HFSPLUS_I(inode).cached_start);
 	} else {
-		up(&HFSPLUS_I(inode).extents_lock);
+		mutex_unlock(&HFSPLUS_I(inode).extents_lock);
 		return -EIO;
 	}
-	up(&HFSPLUS_I(inode).extents_lock);
+	mutex_unlock(&HFSPLUS_I(inode).extents_lock);
 
 done:
 	dprint(DBG_EXTENT, "get_block(%lu): %llu - %u\n", inode->i_ino, (long long)iblock, dblock);
@@ -355,7 +355,7 @@ int hfsplus_file_extend(struct inode *inode)
 		return -ENOSPC;
 	}
 
-	down(&HFSPLUS_I(inode).extents_lock);
+	mutex_lock(&HFSPLUS_I(inode).extents_lock);
 	if (HFSPLUS_I(inode).alloc_blocks == HFSPLUS_I(inode).first_blocks)
 		goal = hfsplus_ext_lastblock(HFSPLUS_I(inode).first_extents);
 	else {
@@ -408,7 +408,7 @@ int hfsplus_file_extend(struct inode *inode)
 			goto insert_extent;
 	}
 out:
-	up(&HFSPLUS_I(inode).extents_lock);
+	mutex_unlock(&HFSPLUS_I(inode).extents_lock);
 	if (!res) {
 		HFSPLUS_I(inode).alloc_blocks += len;
 		mark_inode_dirty(inode);
@@ -465,7 +465,7 @@ void hfsplus_file_truncate(struct inode *inode)
 	if (blk_cnt == alloc_cnt)
 		goto out;
 
-	down(&HFSPLUS_I(inode).extents_lock);
+	mutex_lock(&HFSPLUS_I(inode).extents_lock);
 	hfs_find_init(HFSPLUS_SB(sb).ext_tree, &fd);
 	while (1) {
 		if (alloc_cnt == HFSPLUS_I(inode).first_blocks) {
@@ -492,7 +492,7 @@ void hfsplus_file_truncate(struct inode *inode)
 		hfs_brec_remove(&fd);
 	}
 	hfs_find_exit(&fd);
-	up(&HFSPLUS_I(inode).extents_lock);
+	mutex_unlock(&HFSPLUS_I(inode).extents_lock);
 
 	HFSPLUS_I(inode).alloc_blocks = blk_cnt;
 out:
diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h
index 9e59537b43d..f027a905225 100644
--- a/fs/hfsplus/hfsplus_fs.h
+++ b/fs/hfsplus/hfsplus_fs.h
@@ -11,6 +11,7 @@
 #define _LINUX_HFSPLUS_FS_H
 
 #include <linux/fs.h>
+#include <linux/mutex.h>
 #include <linux/buffer_head.h>
 #include "hfsplus_raw.h"
 
@@ -154,7 +155,7 @@ struct hfsplus_sb_info {
 
 
 struct hfsplus_inode_info {
-	struct semaphore extents_lock;
+	struct mutex extents_lock;
 	u32 clump_blocks, alloc_blocks;
 	sector_t fs_blocks;
 	/* Allocation extents from catalog record or volume header */
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 67e1c8b467c..cc3b5e24339 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -163,7 +163,7 @@ static struct dentry *hfsplus_file_lookup(struct inode *dir, struct dentry *dent
 
 	inode->i_ino = dir->i_ino;
 	INIT_LIST_HEAD(&HFSPLUS_I(inode).open_dir_list);
-	init_MUTEX(&HFSPLUS_I(inode).extents_lock);
+	mutex_init(&HFSPLUS_I(inode).extents_lock);
 	HFSPLUS_I(inode).flags = HFSPLUS_FLG_RSRC;
 
 	hfs_find_init(HFSPLUS_SB(sb).cat_tree, &fd);
@@ -316,7 +316,7 @@ struct inode *hfsplus_new_inode(struct super_block *sb, int mode)
 	inode->i_nlink = 1;
 	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
 	INIT_LIST_HEAD(&HFSPLUS_I(inode).open_dir_list);
-	init_MUTEX(&HFSPLUS_I(inode).extents_lock);
+	mutex_init(&HFSPLUS_I(inode).extents_lock);
 	atomic_set(&HFSPLUS_I(inode).opencnt, 0);
 	HFSPLUS_I(inode).flags = 0;
 	memset(HFSPLUS_I(inode).first_extents, 0, sizeof(hfsplus_extent_rec));
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index ce97a54518d..3859118531c 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -34,7 +34,7 @@ struct inode *hfsplus_iget(struct super_block *sb, unsigned long ino)
 		return inode;
 
 	INIT_LIST_HEAD(&HFSPLUS_I(inode).open_dir_list);
-	init_MUTEX(&HFSPLUS_I(inode).extents_lock);
+	mutex_init(&HFSPLUS_I(inode).extents_lock);
 	HFSPLUS_I(inode).flags = 0;
 	HFSPLUS_I(inode).rsrc_inode = NULL;
 	atomic_set(&HFSPLUS_I(inode).opencnt, 0);
-- 
cgit v1.2.3


From 5d4f7fddf8882b214e4aabb3bdb37f90a72b2537 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:36 -0700
Subject: reiserfs: fix synchronization of quota files in journal=data mode

In journal=data mode, it is not enough to do write_inode_now() as done in
vfs_quota_on() to write all data to their final location (which is needed for
quota_read to work correctly).  Calling journal_end_sync() before calling
vfs_quota_on() does it's job because transactions are committed to the journal
and data marked as dirty in memory so write_inode_now() writes them to their
final locations.

Cc: <reiserfs-devel@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/super.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 1d40f2bd197..0cbf4cd1114 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2026,6 +2026,7 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
 	int err;
 	struct nameidata nd;
 	struct inode *inode;
+	struct reiserfs_transaction_handle th;
 
 	if (!(REISERFS_SB(sb)->s_mount_opt & (1 << REISERFS_QUOTA)))
 		return -EINVAL;
@@ -2053,17 +2054,28 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id,
 		}
 		mark_inode_dirty(inode);
 	}
-	/* Not journalling quota? No more tests needed... */
-	if (!REISERFS_SB(sb)->s_qf_names[USRQUOTA] &&
-	    !REISERFS_SB(sb)->s_qf_names[GRPQUOTA]) {
-		path_put(&nd.path);
-		return vfs_quota_on(sb, type, format_id, path, 0);
-	}
-	/* Quotafile not of fs root? */
-	if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
-		reiserfs_warning(sb,
+	/* Journaling quota? */
+	if (REISERFS_SB(sb)->s_qf_names[type]) {
+		/* Quotafile not of fs root? */
+		if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
+			reiserfs_warning(sb,
 				 "reiserfs: Quota file not on filesystem root. "
 				 "Journalled quota will not work.");
+	}
+
+	/*
+	 * When we journal data on quota file, we have to flush journal to see
+	 * all updates to the file when we bypass pagecache...
+	 */
+	if (reiserfs_file_data_log(inode)) {
+		/* Just start temporary transaction and finish it */
+		err = journal_begin(&th, sb, 1);
+		if (err)
+			return err;
+		err = journal_end_sync(&th, sb, 1);
+		if (err)
+			return err;
+	}
 	path_put(&nd.path);
 	return vfs_quota_on(sb, type, format_id, path, 0);
 }
-- 
cgit v1.2.3


From 4506567b24d3ea707e46e8aad64caef539382f4b Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:37 -0700
Subject: reiserfs: fix typos in messages and comments (journalled ->
 journaled)

Cc: <reiserfs-devel@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/super.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 0cbf4cd1114..f723604c5d9 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -182,7 +182,7 @@ static int finish_unfinished(struct super_block *s)
 			int ret = reiserfs_quota_on_mount(s, i);
 			if (ret < 0)
 				reiserfs_warning(s,
-						 "reiserfs: cannot turn on journalled quota: error %d",
+						 "reiserfs: cannot turn on journaled quota: error %d",
 						 ret);
 		}
 	}
@@ -994,7 +994,7 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 
 			if (sb_any_quota_enabled(s)) {
 				reiserfs_warning(s,
-						 "reiserfs_parse_options: cannot change journalled quota options when quota turned on.");
+						 "reiserfs_parse_options: cannot change journaled quota options when quota turned on.");
 				return 0;
 			}
 			if (*arg) {	/* Some filename specified? */
@@ -1039,7 +1039,7 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 #else
 		if (c == 'u' || c == 'g' || c == 'f') {
 			reiserfs_warning(s,
-					 "reiserfs_parse_options: journalled quota options not supported.");
+					 "reiserfs_parse_options: journaled quota options not supported.");
 			return 0;
 		}
 #endif
@@ -1050,7 +1050,7 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 	    && (REISERFS_SB(s)->s_qf_names[USRQUOTA]
 		|| REISERFS_SB(s)->s_qf_names[GRPQUOTA])) {
 		reiserfs_warning(s,
-				 "reiserfs_parse_options: journalled quota format not specified.");
+				 "reiserfs_parse_options: journaled quota format not specified.");
 		return 0;
 	}
 	/* This checking is not precise wrt the quota type but for our purposes it is sufficient */
@@ -1980,7 +1980,7 @@ static int reiserfs_release_dquot(struct dquot *dquot)
 
 static int reiserfs_mark_dquot_dirty(struct dquot *dquot)
 {
-	/* Are we journalling quotas? */
+	/* Are we journaling quotas? */
 	if (REISERFS_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] ||
 	    REISERFS_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) {
 		dquot_mark_dquot_dirty(dquot);
-- 
cgit v1.2.3


From 00b441970a0ab48185244300ac7d4e4eb76df692 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:38 -0700
Subject: reiserfs: correct mount option parsing to detect when quota options
 can be changed

We should not allow user to change quota mount options when quota is just
suspended.  It would make mount options and internal quota state inconsistent.

Also we should not allow user to change quota format when quota is turned on.
On the other hand we can just silently ignore when some option is set to the
value it already has (some mount versions do this on remount).  Finally, we
should not discard current quota options if parsing of mount options fails.

Cc: <reiserfs-devel@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/super.c | 83 ++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 60 insertions(+), 23 deletions(-)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index f723604c5d9..a10a6d2a887 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -876,7 +876,9 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 				     mount options were selected. */
 				  unsigned long *blocks,	/* strtol-ed from NNN of resize=NNN */
 				  char **jdev_name,
-				  unsigned int *commit_max_age)
+				  unsigned int *commit_max_age,
+				  char **qf_names,
+				  unsigned int *qfmt)
 {
 	int c;
 	char *arg = NULL;
@@ -992,7 +994,9 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 		if (c == 'u' || c == 'g') {
 			int qtype = c == 'u' ? USRQUOTA : GRPQUOTA;
 
-			if (sb_any_quota_enabled(s)) {
+			if ((sb_any_quota_enabled(s) ||
+			     sb_any_quota_suspended(s)) &&
+			    (!*arg != !REISERFS_SB(s)->s_qf_names[qtype])) {
 				reiserfs_warning(s,
 						 "reiserfs_parse_options: cannot change journaled quota options when quota turned on.");
 				return 0;
@@ -1011,30 +1015,39 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 							 "reiserfs_parse_options: quotafile must be on filesystem root.");
 					return 0;
 				}
-				REISERFS_SB(s)->s_qf_names[qtype] =
+				qf_names[qtype] =
 				    kmalloc(strlen(arg) + 1, GFP_KERNEL);
-				if (!REISERFS_SB(s)->s_qf_names[qtype]) {
+				if (!qf_names[qtype]) {
 					reiserfs_warning(s,
 							 "reiserfs_parse_options: not enough memory for storing quotafile name.");
 					return 0;
 				}
-				strcpy(REISERFS_SB(s)->s_qf_names[qtype], arg);
+				strcpy(qf_names[qtype], arg);
 				*mount_options |= 1 << REISERFS_QUOTA;
 			} else {
-				kfree(REISERFS_SB(s)->s_qf_names[qtype]);
-				REISERFS_SB(s)->s_qf_names[qtype] = NULL;
+				if (qf_names[qtype] !=
+				    REISERFS_SB(s)->s_qf_names[qtype])
+					kfree(qf_names[qtype]);
+				qf_names[qtype] = NULL;
 			}
 		}
 		if (c == 'f') {
 			if (!strcmp(arg, "vfsold"))
-				REISERFS_SB(s)->s_jquota_fmt = QFMT_VFS_OLD;
+				*qfmt = QFMT_VFS_OLD;
 			else if (!strcmp(arg, "vfsv0"))
-				REISERFS_SB(s)->s_jquota_fmt = QFMT_VFS_V0;
+				*qfmt = QFMT_VFS_V0;
 			else {
 				reiserfs_warning(s,
 						 "reiserfs_parse_options: unknown quota format specified.");
 				return 0;
 			}
+			if ((sb_any_quota_enabled(s) ||
+			     sb_any_quota_suspended(s)) &&
+			    *qfmt != REISERFS_SB(s)->s_jquota_fmt) {
+				reiserfs_warning(s,
+						 "reiserfs_parse_options: cannot change journaled quota options when quota turned on.");
+				return 0;
+			}
 		}
 #else
 		if (c == 'u' || c == 'g' || c == 'f') {
@@ -1046,9 +1059,8 @@ static int reiserfs_parse_options(struct super_block *s, char *options,	/* strin
 	}
 
 #ifdef CONFIG_QUOTA
-	if (!REISERFS_SB(s)->s_jquota_fmt
-	    && (REISERFS_SB(s)->s_qf_names[USRQUOTA]
-		|| REISERFS_SB(s)->s_qf_names[GRPQUOTA])) {
+	if (!REISERFS_SB(s)->s_jquota_fmt && !*qfmt
+	    && (qf_names[USRQUOTA] || qf_names[GRPQUOTA])) {
 		reiserfs_warning(s,
 				 "reiserfs_parse_options: journaled quota format not specified.");
 		return 0;
@@ -1130,6 +1142,21 @@ static void handle_attrs(struct super_block *s)
 	}
 }
 
+#ifdef CONFIG_QUOTA
+static void handle_quota_files(struct super_block *s, char **qf_names,
+			       unsigned int *qfmt)
+{
+	int i;
+
+	for (i = 0; i < MAXQUOTAS; i++) {
+		if (qf_names[i] != REISERFS_SB(s)->s_qf_names[i])
+			kfree(REISERFS_SB(s)->s_qf_names[i]);
+		REISERFS_SB(s)->s_qf_names[i] = qf_names[i];
+	}
+	REISERFS_SB(s)->s_jquota_fmt = *qfmt;
+}
+#endif
+
 static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 {
 	struct reiserfs_super_block *rs;
@@ -1141,23 +1168,30 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 	struct reiserfs_journal *journal = SB_JOURNAL(s);
 	char *new_opts = kstrdup(arg, GFP_KERNEL);
 	int err;
+	char *qf_names[MAXQUOTAS];
+	unsigned int qfmt = 0;
 #ifdef CONFIG_QUOTA
 	int i;
+
+	memcpy(qf_names, REISERFS_SB(s)->s_qf_names, sizeof(qf_names));
 #endif
 
 	rs = SB_DISK_SUPER_BLOCK(s);
 
 	if (!reiserfs_parse_options
-	    (s, arg, &mount_options, &blocks, NULL, &commit_max_age)) {
+	    (s, arg, &mount_options, &blocks, NULL, &commit_max_age,
+	    qf_names, &qfmt)) {
 #ifdef CONFIG_QUOTA
-		for (i = 0; i < MAXQUOTAS; i++) {
-			kfree(REISERFS_SB(s)->s_qf_names[i]);
-			REISERFS_SB(s)->s_qf_names[i] = NULL;
-		}
+		for (i = 0; i < MAXQUOTAS; i++)
+			if (qf_names[i] != REISERFS_SB(s)->s_qf_names[i])
+				kfree(qf_names[i]);
 #endif
 		err = -EINVAL;
 		goto out_err;
 	}
+#ifdef CONFIG_QUOTA
+	handle_quota_files(s, qf_names, &qfmt);
+#endif
 
 	handle_attrs(s);
 
@@ -1570,6 +1604,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 	char *jdev_name;
 	struct reiserfs_sb_info *sbi;
 	int errval = -EINVAL;
+	char *qf_names[MAXQUOTAS] = {};
+	unsigned int qfmt = 0;
 
 	save_mount_options(s, data);
 
@@ -1597,9 +1633,12 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 	jdev_name = NULL;
 	if (reiserfs_parse_options
 	    (s, (char *)data, &(sbi->s_mount_opt), &blocks, &jdev_name,
-	     &commit_max_age) == 0) {
+	     &commit_max_age, qf_names, &qfmt) == 0) {
 		goto error;
 	}
+#ifdef CONFIG_QUOTA
+	handle_quota_files(s, qf_names, &qfmt);
+#endif
 
 	if (blocks) {
 		SWARN(silent, s, "jmacd-7: reiserfs_fill_super: resize option "
@@ -1819,7 +1858,7 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 
 	return (0);
 
-      error:
+error:
 	if (jinit_done) {	/* kill the commit thread, free journal ram */
 		journal_release_error(NULL, s);
 	}
@@ -1830,10 +1869,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 #ifdef CONFIG_QUOTA
 	{
 		int j;
-		for (j = 0; j < MAXQUOTAS; j++) {
-			kfree(sbi->s_qf_names[j]);
-			sbi->s_qf_names[j] = NULL;
-		}
+		for (j = 0; j < MAXQUOTAS; j++)
+			kfree(qf_names[j]);
 	}
 #endif
 	kfree(sbi);
-- 
cgit v1.2.3


From f68215c4640a38d66429014e524a627bf572d26a Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Fri, 25 Jul 2008 01:46:38 -0700
Subject: reiserfs: convert j_lock to mutex

j_lock is a semaphore but uses it as if it were a mutex.  This patch converts
it to a mutex.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/journal.c          | 6 +++---
 include/linux/reiserfs_fs_sb.h | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index e396b2fa474..0f7b1e807e6 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -558,13 +558,13 @@ static inline void insert_journal_hash(struct reiserfs_journal_cnode **table,
 static inline void lock_journal(struct super_block *p_s_sb)
 {
 	PROC_INFO_INC(p_s_sb, journal.lock_journal);
-	down(&SB_JOURNAL(p_s_sb)->j_lock);
+	mutex_lock(&SB_JOURNAL(p_s_sb)->j_mutex);
 }
 
 /* unlock the current transaction */
 static inline void unlock_journal(struct super_block *p_s_sb)
 {
-	up(&SB_JOURNAL(p_s_sb)->j_lock);
+	mutex_unlock(&SB_JOURNAL(p_s_sb)->j_mutex);
 }
 
 static inline void get_journal_list(struct reiserfs_journal_list *jl)
@@ -2837,7 +2837,7 @@ int journal_init(struct super_block *p_s_sb, const char *j_dev_name,
 	journal->j_last = NULL;
 	journal->j_first = NULL;
 	init_waitqueue_head(&(journal->j_join_wait));
-	sema_init(&journal->j_lock, 1);
+	mutex_init(&journal->j_mutex);
 	sema_init(&journal->j_flush_sem, 1);
 
 	journal->j_trans_id = 10;
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 336ee43ed7d..49b639b88ba 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -193,7 +193,7 @@ struct reiserfs_journal {
 	struct buffer_head *j_header_bh;
 
 	time_t j_trans_start_time;	/* time this transaction started */
-	struct semaphore j_lock;
+	struct mutex j_mutex;
 	struct semaphore j_flush_sem;
 	wait_queue_head_t j_join_wait;	/* wait for current transaction to finish before starting new one */
 	atomic_t j_jlock;	/* lock for j_join_wait */
-- 
cgit v1.2.3


From afe70259076fff0446001eaa1a287f615241a357 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Fri, 25 Jul 2008 01:46:39 -0700
Subject: reiserfs: convert j_flush_sem to mutex

j_flush_sem is a semaphore but uses it as if it were a mutex.  This patch
converts it to a mutex.

[akpm@linux-foundation.org: fix mutex_trylock retval treatment]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/journal.c          | 14 +++++++-------
 include/linux/reiserfs_fs_sb.h |  2 +-
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 0f7b1e807e6..3cb4a562030 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -1411,8 +1411,8 @@ static int flush_journal_list(struct super_block *s,
 
 	/* if flushall == 0, the lock is already held */
 	if (flushall) {
-		down(&journal->j_flush_sem);
-	} else if (!down_trylock(&journal->j_flush_sem)) {
+		mutex_lock(&journal->j_flush_mutex);
+	} else if (mutex_trylock(&journal->j_flush_mutex)) {
 		BUG();
 	}
 
@@ -1642,7 +1642,7 @@ static int flush_journal_list(struct super_block *s,
 	jl->j_state = 0;
 	put_journal_list(s, jl);
 	if (flushall)
-		up(&journal->j_flush_sem);
+		mutex_unlock(&journal->j_flush_mutex);
 	put_fs_excl();
 	return err;
 }
@@ -1772,12 +1772,12 @@ static int kupdate_transactions(struct super_block *s,
 	struct reiserfs_journal *journal = SB_JOURNAL(s);
 	chunk.nr = 0;
 
-	down(&journal->j_flush_sem);
+	mutex_lock(&journal->j_flush_mutex);
 	if (!journal_list_still_alive(s, orig_trans_id)) {
 		goto done;
 	}
 
-	/* we've got j_flush_sem held, nobody is going to delete any
+	/* we've got j_flush_mutex held, nobody is going to delete any
 	 * of these lists out from underneath us
 	 */
 	while ((num_trans && transactions_flushed < num_trans) ||
@@ -1812,7 +1812,7 @@ static int kupdate_transactions(struct super_block *s,
 	}
 
       done:
-	up(&journal->j_flush_sem);
+	mutex_unlock(&journal->j_flush_mutex);
 	return ret;
 }
 
@@ -2838,7 +2838,7 @@ int journal_init(struct super_block *p_s_sb, const char *j_dev_name,
 	journal->j_first = NULL;
 	init_waitqueue_head(&(journal->j_join_wait));
 	mutex_init(&journal->j_mutex);
-	sema_init(&journal->j_flush_sem, 1);
+	mutex_init(&journal->j_flush_mutex);
 
 	journal->j_trans_id = 10;
 	journal->j_mount_id = 10;
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 49b639b88ba..c0751724ee6 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -194,7 +194,7 @@ struct reiserfs_journal {
 
 	time_t j_trans_start_time;	/* time this transaction started */
 	struct mutex j_mutex;
-	struct semaphore j_flush_sem;
+	struct mutex j_flush_mutex;
 	wait_queue_head_t j_join_wait;	/* wait for current transaction to finish before starting new one */
 	atomic_t j_jlock;	/* lock for j_join_wait */
 	int j_list_bitmap_index;	/* number of next list bitmap to use */
-- 
cgit v1.2.3


From 90415deac75a761a25239af6f56381546f8d2201 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Fri, 25 Jul 2008 01:46:40 -0700
Subject: reiserfs: convert j_commit_lock to mutex

j_commit_lock is a semaphore but uses it as if it were a mutex.  This patch
converts it to a mutex.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/journal.c          | 22 ++++++++++------------
 include/linux/reiserfs_fs_sb.h |  2 +-
 2 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 3cb4a562030..c8f60ee183b 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -34,15 +34,10 @@
 **		        from within kupdate, it will ignore the immediate flag
 */
 
-#include <asm/uaccess.h>
-#include <asm/system.h>
-
 #include <linux/time.h>
 #include <linux/semaphore.h>
-
 #include <linux/vmalloc.h>
 #include <linux/reiserfs_fs.h>
-
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/fcntl.h>
@@ -54,6 +49,9 @@
 #include <linux/writeback.h>
 #include <linux/blkdev.h>
 #include <linux/backing-dev.h>
+#include <linux/uaccess.h>
+
+#include <asm/system.h>
 
 /* gets a struct reiserfs_journal_list * from a list head */
 #define JOURNAL_LIST_ENTRY(h) (list_entry((h), struct reiserfs_journal_list, \
@@ -1045,9 +1043,9 @@ static int flush_commit_list(struct super_block *s,
 	}
 
 	/* make sure nobody is trying to flush this one at the same time */
-	down(&jl->j_commit_lock);
+	mutex_lock(&jl->j_commit_mutex);
 	if (!journal_list_still_alive(s, trans_id)) {
-		up(&jl->j_commit_lock);
+		mutex_unlock(&jl->j_commit_mutex);
 		goto put_jl;
 	}
 	BUG_ON(jl->j_trans_id == 0);
@@ -1057,7 +1055,7 @@ static int flush_commit_list(struct super_block *s,
 		if (flushall) {
 			atomic_set(&(jl->j_older_commits_done), 1);
 		}
-		up(&jl->j_commit_lock);
+		mutex_unlock(&jl->j_commit_mutex);
 		goto put_jl;
 	}
 
@@ -1181,7 +1179,7 @@ static int flush_commit_list(struct super_block *s,
 	if (flushall) {
 		atomic_set(&(jl->j_older_commits_done), 1);
 	}
-	up(&jl->j_commit_lock);
+	mutex_unlock(&jl->j_commit_mutex);
       put_jl:
 	put_journal_list(s, jl);
 
@@ -2556,7 +2554,7 @@ static struct reiserfs_journal_list *alloc_journal_list(struct super_block *s)
 	INIT_LIST_HEAD(&jl->j_working_list);
 	INIT_LIST_HEAD(&jl->j_tail_bh_list);
 	INIT_LIST_HEAD(&jl->j_bh_list);
-	sema_init(&jl->j_commit_lock, 1);
+	mutex_init(&jl->j_commit_mutex);
 	SB_JOURNAL(s)->j_num_lists++;
 	get_journal_list(jl);
 	return jl;
@@ -4030,7 +4028,7 @@ static int do_journal_end(struct reiserfs_transaction_handle *th,
 	 * the new transaction is fully setup, and we've already flushed the
 	 * ordered bh list
 	 */
-	down(&jl->j_commit_lock);
+	mutex_lock(&jl->j_commit_mutex);
 
 	/* save the transaction id in case we need to commit it later */
 	commit_trans_id = jl->j_trans_id;
@@ -4196,7 +4194,7 @@ static int do_journal_end(struct reiserfs_transaction_handle *th,
 		lock_kernel();
 	}
 	BUG_ON(!list_empty(&jl->j_tail_bh_list));
-	up(&jl->j_commit_lock);
+	mutex_unlock(&jl->j_commit_mutex);
 
 	/* honor the flush wishes from the caller, simple commits can
 	 ** be done outside the journal lock, they are done below
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index c0751724ee6..315517e8bfa 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -152,7 +152,7 @@ struct reiserfs_journal_list {
 	atomic_t j_nonzerolen;
 	atomic_t j_commit_left;
 	atomic_t j_older_commits_done;	/* all commits older than this on disk */
-	struct semaphore j_commit_lock;
+	struct mutex j_commit_mutex;
 	unsigned long j_trans_id;
 	time_t j_timestamp;
 	struct reiserfs_list_bitmap *j_list_bitmap;
-- 
cgit v1.2.3


From 3264d4ded4d916d294d776b77b72d477c63ac3be Mon Sep 17 00:00:00 2001
From: Shen Feng <shen@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:46:41 -0700
Subject: reiserfs: remove double definitions of xattr macros

remove the definitions of macros:
XATTR_SECURITY_PREFIX
XATTR_TRUSTED_PREFIX
XATTR_USER_PREFIX
since they are defined in linux/xattr.h

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/xattr_security.c | 2 --
 fs/reiserfs/xattr_trusted.c  | 2 --
 fs/reiserfs/xattr_user.c     | 2 --
 3 files changed, 6 deletions(-)

diff --git a/fs/reiserfs/xattr_security.c b/fs/reiserfs/xattr_security.c
index 5e90a95ad60..056008db137 100644
--- a/fs/reiserfs/xattr_security.c
+++ b/fs/reiserfs/xattr_security.c
@@ -6,8 +6,6 @@
 #include <linux/reiserfs_xattr.h>
 #include <asm/uaccess.h>
 
-#define XATTR_SECURITY_PREFIX "security."
-
 static int
 security_get(struct inode *inode, const char *name, void *buffer, size_t size)
 {
diff --git a/fs/reiserfs/xattr_trusted.c b/fs/reiserfs/xattr_trusted.c
index 024a938ca60..60abe2bb1f9 100644
--- a/fs/reiserfs/xattr_trusted.c
+++ b/fs/reiserfs/xattr_trusted.c
@@ -7,8 +7,6 @@
 #include <linux/reiserfs_xattr.h>
 #include <asm/uaccess.h>
 
-#define XATTR_TRUSTED_PREFIX "trusted."
-
 static int
 trusted_get(struct inode *inode, const char *name, void *buffer, size_t size)
 {
diff --git a/fs/reiserfs/xattr_user.c b/fs/reiserfs/xattr_user.c
index 073f39364b1..1384efcb938 100644
--- a/fs/reiserfs/xattr_user.c
+++ b/fs/reiserfs/xattr_user.c
@@ -10,8 +10,6 @@
 # include <linux/reiserfs_acl.h>
 #endif
 
-#define XATTR_USER_PREFIX "user."
-
 static int
 user_get(struct inode *inode, const char *name, void *buffer, size_t size)
 {
-- 
cgit v1.2.3


From 8d44d9741f6808c107a144f469fb89e6fe7c55e3 Mon Sep 17 00:00:00 2001
From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Date: Fri, 25 Jul 2008 01:46:41 -0700
Subject: fat: fix parse_options()

Current parse_options() exits too early.  We need to run the code of
bottom in this function even if users doesn't specify options.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fat/inode.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 46a4508ffd2..60deb5fd118 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -950,7 +950,7 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 	*debug = 0;
 
 	if (!options)
-		return 0;
+		goto out;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -1104,10 +1104,13 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 			return -EINVAL;
 		}
 	}
+
+out:
 	/* UTF-8 doesn't provide FAT semantics */
 	if (!strcmp(opts->iocharset, "utf8")) {
 		printk(KERN_ERR "FAT: utf8 is not a recommended IO charset"
-		       " for FAT filesystems, filesystem will be case sensitive!\n");
+		       " for FAT filesystems, filesystem will be "
+		       "case sensitive!\n");
 	}
 
 	/* If user doesn't specify allow_utime, it's initialized from dmask. */
-- 
cgit v1.2.3


From 4596c8aaf96e8634ca755c9f34b91420a39bebd4 Mon Sep 17 00:00:00 2001
From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Date: Fri, 25 Jul 2008 01:46:42 -0700
Subject: fat: fix VFAT_IOCTL_READDIR_xxx and cleanup for userland

"struct dirent" is a kernel type here, but is a **different type** in
userspace!  This means both the structure and the IOCTL number is wrong!

So, this adds new "struct __fat_dirent" to generate correct IOCTL number.
And kernel stuff moves to under __KERNEL__.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/msdos_fs.h | 47 +++++++++++++++++++++++++++--------------------
 1 file changed, 27 insertions(+), 20 deletions(-)

diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 81cd36b735b..5161394c789 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -2,11 +2,11 @@
 #define _LINUX_MSDOS_FS_H
 
 #include <linux/magic.h>
+#include <asm/byteorder.h>
 
 /*
  * The MS-DOS filesystem constants/structures
  */
-#include <asm/byteorder.h>
 
 #define SECTOR_SIZE	512		/* sector size (bytes) */
 #define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
@@ -89,24 +89,22 @@
 #define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
 			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
 
+struct __fat_dirent {
+	long		d_ino;
+	__kernel_off_t	d_off;
+	unsigned short	d_reclen;
+	char		d_name[256]; /* We must not include limits.h! */
+};
+
 /*
  * ioctl commands
  */
-#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct dirent [2])
-#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct dirent [2])
+#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
+#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
 /* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
 #define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
 #define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
 
-/*
- * vfat shortname flags
- */
-#define VFAT_SFN_DISPLAY_LOWER	0x0001 /* convert to lowercase for display */
-#define VFAT_SFN_DISPLAY_WIN95	0x0002 /* emulate win95 rule for display */
-#define VFAT_SFN_DISPLAY_WINNT	0x0004 /* emulate winnt rule for display */
-#define VFAT_SFN_CREATE_WIN95	0x0100 /* emulate win95 rule for create */
-#define VFAT_SFN_CREATE_WINNT	0x0200 /* emulate winnt rule for create */
-
 struct fat_boot_sector {
 	__u8	ignored[3];	/* Boot strap short or near jump */
 	__u8	system_id[8];	/* Name - can be used to special case
@@ -168,14 +166,6 @@ struct msdos_dir_slot {
 	__u8    name11_12[4];	/* last 2 characters in name */
 };
 
-struct fat_slot_info {
-	loff_t i_pos;		/* on-disk position of directory entry */
-	loff_t slot_off;	/* offset for slot or de start */
-	int nr_slots;		/* number of slots + 1(de) in filename */
-	struct msdos_dir_entry *de;
-	struct buffer_head *bh;
-};
-
 #ifdef __KERNEL__
 
 #include <linux/buffer_head.h>
@@ -184,6 +174,15 @@ struct fat_slot_info {
 #include <linux/fs.h>
 #include <linux/mutex.h>
 
+/*
+ * vfat shortname flags
+ */
+#define VFAT_SFN_DISPLAY_LOWER	0x0001 /* convert to lowercase for display */
+#define VFAT_SFN_DISPLAY_WIN95	0x0002 /* emulate win95 rule for display */
+#define VFAT_SFN_DISPLAY_WINNT	0x0004 /* emulate winnt rule for display */
+#define VFAT_SFN_CREATE_WIN95	0x0100 /* emulate win95 rule for create */
+#define VFAT_SFN_CREATE_WINNT	0x0200 /* emulate winnt rule for create */
+
 struct fat_mount_options {
 	uid_t fs_uid;
 	gid_t fs_gid;
@@ -267,6 +266,14 @@ struct msdos_inode_info {
 	struct inode vfs_inode;
 };
 
+struct fat_slot_info {
+	loff_t i_pos;		/* on-disk position of directory entry */
+	loff_t slot_off;	/* offset for slot or de start */
+	int nr_slots;		/* number of slots + 1(de) in filename */
+	struct msdos_dir_entry *de;
+	struct buffer_head *bh;
+};
+
 static inline struct msdos_sb_info *MSDOS_SB(struct super_block *sb)
 {
 	return sb->s_fs_info;
-- 
cgit v1.2.3


From 531f710f8e68fd2bad7516a090bff372f5f9cf6d Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:46:43 -0700
Subject: fat/dir.c: switch to struct __fat_dirent

struct __fat_dirent is what was formerly the kernel struct dirent (that
was different from the userspace struct dirent).

Converting all fat users to struct __fat_dirent will allow us to get rid
of the conflicting struct dirent definition.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fat/dir.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 34541d06e62..b57c4b1db63 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -17,7 +17,6 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/msdos_fs.h>
-#include <linux/dirent.h>
 #include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/compat.h>
@@ -715,7 +714,7 @@ efault:									   \
 	return -EFAULT;							   \
 }
 
-FAT_IOCTL_FILLDIR_FUNC(fat_ioctl_filldir, dirent)
+FAT_IOCTL_FILLDIR_FUNC(fat_ioctl_filldir, __fat_dirent)
 
 static int fat_ioctl_readdir(struct inode *inode, struct file *filp,
 			     void __user *dirent, filldir_t filldir,
@@ -741,7 +740,7 @@ static int fat_ioctl_readdir(struct inode *inode, struct file *filp,
 static int fat_dir_ioctl(struct inode *inode, struct file *filp,
 			 unsigned int cmd, unsigned long arg)
 {
-	struct dirent __user *d1 = (struct dirent __user *)arg;
+	struct __fat_dirent __user *d1 = (struct __fat_dirent __user *)arg;
 	int short_only, both;
 
 	switch (cmd) {
@@ -757,7 +756,7 @@ static int fat_dir_ioctl(struct inode *inode, struct file *filp,
 		return fat_generic_ioctl(inode, filp, cmd, arg);
 	}
 
-	if (!access_ok(VERIFY_WRITE, d1, sizeof(struct dirent[2])))
+	if (!access_ok(VERIFY_WRITE, d1, sizeof(struct __fat_dirent[2])))
 		return -EFAULT;
 	/*
 	 * Yes, we don't need this put_user() absolutely. However old
-- 
cgit v1.2.3


From d688611674cc9c265ee67e89d2ea8bf060c17e8d Mon Sep 17 00:00:00 2001
From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Date: Fri, 25 Jul 2008 01:46:43 -0700
Subject: fat: cleanup fs/fat/dir.c

This is no logic changes, just cleans fs/fat/dir.c up.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fat/dir.c | 131 ++++++++++++++++++++++++++++++-----------------------------
 1 file changed, 67 insertions(+), 64 deletions(-)

diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index b57c4b1db63..a4410740627 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -123,10 +123,11 @@ static inline int fat_get_entry(struct inode *dir, loff_t *pos,
  * but ignore that right now.
  * Ahem... Stack smashing in ring 0 isn't fun. Fixed.
  */
-static int uni16_to_x8(unsigned char *ascii, wchar_t *uni, int len,
+static int uni16_to_x8(unsigned char *ascii, const wchar_t *uni, int len,
 		       int uni_xlate, struct nls_table *nls)
 {
-	wchar_t *ip, ec;
+	const wchar_t *ip;
+	wchar_t ec;
 	unsigned char *op, nc;
 	int charlen;
 	int k;
@@ -166,6 +167,16 @@ static int uni16_to_x8(unsigned char *ascii, wchar_t *uni, int len,
 	return (op - ascii);
 }
 
+static inline int fat_uni_to_x8(struct msdos_sb_info *sbi, const wchar_t *uni,
+				unsigned char *buf, int size)
+{
+	if (sbi->options.utf8)
+		return utf8_wcstombs(buf, uni, size);
+	else
+		return uni16_to_x8(buf, uni, size, sbi->options.unicode_xlate,
+				   sbi->nls_io);
+}
+
 static inline int
 fat_short2uni(struct nls_table *t, unsigned char *c, int clen, wchar_t *uni)
 {
@@ -226,6 +237,19 @@ fat_shortname2uni(struct nls_table *nls, unsigned char *buf, int buf_size,
 	return len;
 }
 
+static inline int fat_name_match(struct msdos_sb_info *sbi,
+				 const unsigned char *a, int a_len,
+				 const unsigned char *b, int b_len)
+{
+	if (a_len != b_len)
+		return 0;
+
+	if (sbi->options.name_check != 's')
+		return !nls_strnicmp(sbi->nls_io, a, b, a_len);
+	else
+		return !memcmp(a, b, a_len);
+}
+
 enum { PARSE_INVALID = 1, PARSE_NOT_LONGNAME, PARSE_EOF, };
 
 /**
@@ -311,29 +335,24 @@ int fat_search_long(struct inode *inode, const unsigned char *name,
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 	struct buffer_head *bh = NULL;
 	struct msdos_dir_entry *de;
-	struct nls_table *nls_io = sbi->nls_io;
 	struct nls_table *nls_disk = sbi->nls_disk;
-	wchar_t bufuname[14];
 	unsigned char nr_slots;
-	int xlate_len;
+	wchar_t bufuname[14];
 	wchar_t *unicode = NULL;
 	unsigned char work[MSDOS_NAME];
 	unsigned char *bufname = NULL;
-	int uni_xlate = sbi->options.unicode_xlate;
-	int utf8 = sbi->options.utf8;
-	int anycase = (sbi->options.name_check != 's');
 	unsigned short opt_shortname = sbi->options.shortname;
 	loff_t cpos = 0;
-	int chl, i, j, last_u, err;
+	int chl, i, j, last_u, err, len;
 
 	bufname = __getname();
 	if (!bufname)
 		return -ENOMEM;
 
 	err = -ENOENT;
-	while(1) {
+	while (1) {
 		if (fat_get_entry(inode, &cpos, &bh, &de) == -1)
-			goto EODir;
+			goto end_of_dir;
 parse_record:
 		nr_slots = 0;
 		if (de->name[0] == DELETED_FLAG)
@@ -352,7 +371,7 @@ parse_record:
 			else if (status == PARSE_NOT_LONGNAME)
 				goto parse_record;
 			else if (status == PARSE_EOF)
-				goto EODir;
+				goto end_of_dir;
 		}
 
 		memcpy(work, de->name, sizeof(de->name));
@@ -393,30 +412,21 @@ parse_record:
 		if (!last_u)
 			continue;
 
+		/* Compare shortname */
 		bufuname[last_u] = 0x0000;
-		xlate_len = utf8
-			?utf8_wcstombs(bufname, bufuname, PATH_MAX)
-			:uni16_to_x8(bufname, bufuname, PATH_MAX, uni_xlate, nls_io);
-		if (xlate_len == name_len)
-			if ((!anycase && !memcmp(name, bufname, xlate_len)) ||
-			    (anycase && !nls_strnicmp(nls_io, name, bufname,
-								xlate_len)))
-				goto Found;
+		len = fat_uni_to_x8(sbi, bufuname, bufname, PATH_MAX);
+		if (fat_name_match(sbi, name, name_len, bufname, len))
+			goto found;
 
 		if (nr_slots) {
-			xlate_len = utf8
-				?utf8_wcstombs(bufname, unicode, PATH_MAX)
-				:uni16_to_x8(bufname, unicode, PATH_MAX, uni_xlate, nls_io);
-			if (xlate_len != name_len)
-				continue;
-			if ((!anycase && !memcmp(name, bufname, xlate_len)) ||
-			    (anycase && !nls_strnicmp(nls_io, name, bufname,
-								xlate_len)))
-				goto Found;
+			/* Compare longname */
+			len = fat_uni_to_x8(sbi, unicode, bufname, PATH_MAX);
+			if (fat_name_match(sbi, name, name_len, bufname, len))
+				goto found;
 		}
 	}
 
-Found:
+found:
 	nr_slots++;	/* include the de */
 	sinfo->slot_off = cpos - nr_slots * sizeof(*de);
 	sinfo->nr_slots = nr_slots;
@@ -424,7 +434,7 @@ Found:
 	sinfo->bh = bh;
 	sinfo->i_pos = fat_make_i_pos(sb, sinfo->bh, sinfo->de);
 	err = 0;
-EODir:
+end_of_dir:
 	if (bufname)
 		__putname(bufname);
 	if (unicode)
@@ -452,23 +462,19 @@ static int __fat_readdir(struct inode *inode, struct file *filp, void *dirent,
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 	struct buffer_head *bh;
 	struct msdos_dir_entry *de;
-	struct nls_table *nls_io = sbi->nls_io;
 	struct nls_table *nls_disk = sbi->nls_disk;
-	unsigned char long_slots;
-	const char *fill_name;
-	int fill_len;
+	unsigned char nr_slots;
 	wchar_t bufuname[14];
 	wchar_t *unicode = NULL;
 	unsigned char c, work[MSDOS_NAME], bufname[56], *ptname = bufname;
-	unsigned long lpos, dummy, *furrfu = &lpos;
-	int uni_xlate = sbi->options.unicode_xlate;
+	unsigned short opt_shortname = sbi->options.shortname;
 	int isvfat = sbi->options.isvfat;
-	int utf8 = sbi->options.utf8;
 	int nocase = sbi->options.nocase;
-	unsigned short opt_shortname = sbi->options.shortname;
+	const char *fill_name;
 	unsigned long inum;
-	int chi, chl, i, i2, j, last, last_u, dotoffset = 0;
+	unsigned long lpos, dummy, *furrfu = &lpos;
 	loff_t cpos;
+	int chi, chl, i, i2, j, last, last_u, dotoffset = 0, fill_len;
 	int ret = 0;
 
 	lock_super(sb);
@@ -488,43 +494,43 @@ static int __fat_readdir(struct inode *inode, struct file *filp, void *dirent,
 			cpos = 0;
 		}
 	}
-	if (cpos & (sizeof(struct msdos_dir_entry)-1)) {
+	if (cpos & (sizeof(struct msdos_dir_entry) - 1)) {
 		ret = -ENOENT;
 		goto out;
 	}
 
 	bh = NULL;
-GetNew:
+get_new:
 	if (fat_get_entry(inode, &cpos, &bh, &de) == -1)
-		goto EODir;
+		goto end_of_dir;
 parse_record:
-	long_slots = 0;
+	nr_slots = 0;
 	/* Check for long filename entry */
 	if (isvfat) {
 		if (de->name[0] == DELETED_FLAG)
-			goto RecEnd;
+			goto record_end;
 		if (de->attr != ATTR_EXT && (de->attr & ATTR_VOLUME))
-			goto RecEnd;
+			goto record_end;
 		if (de->attr != ATTR_EXT && IS_FREE(de->name))
-			goto RecEnd;
+			goto record_end;
 	} else {
 		if ((de->attr & ATTR_VOLUME) || IS_FREE(de->name))
-			goto RecEnd;
+			goto record_end;
 	}
 
 	if (isvfat && de->attr == ATTR_EXT) {
 		int status = fat_parse_long(inode, &cpos, &bh, &de,
-					    &unicode, &long_slots);
+					    &unicode, &nr_slots);
 		if (status < 0) {
 			filp->f_pos = cpos;
 			ret = status;
 			goto out;
 		} else if (status == PARSE_INVALID)
-			goto RecEnd;
+			goto record_end;
 		else if (status == PARSE_NOT_LONGNAME)
 			goto parse_record;
 		else if (status == PARSE_EOF)
-			goto EODir;
+			goto end_of_dir;
 	}
 
 	if (sbi->options.dotsOK) {
@@ -586,12 +592,12 @@ parse_record:
 		}
 	}
 	if (!last)
-		goto RecEnd;
+		goto record_end;
 
 	i = last + dotoffset;
 	j = last_u;
 
-	lpos = cpos - (long_slots+1)*sizeof(struct msdos_dir_entry);
+	lpos = cpos - (nr_slots + 1) * sizeof(struct msdos_dir_entry);
 	if (!memcmp(de->name, MSDOS_DOT, MSDOS_NAME))
 		inum = inode->i_ino;
 	else if (!memcmp(de->name, MSDOS_DOTDOT, MSDOS_NAME)) {
@@ -608,20 +614,17 @@ parse_record:
 
 	if (isvfat) {
 		bufuname[j] = 0x0000;
-		i = utf8 ? utf8_wcstombs(bufname, bufuname, sizeof(bufname))
-			 : uni16_to_x8(bufname, bufuname, sizeof(bufname), uni_xlate, nls_io);
+		i = fat_uni_to_x8(sbi, bufuname, bufname, sizeof(bufname));
 	}
 
 	fill_name = bufname;
 	fill_len = i;
-	if (!short_only && long_slots) {
+	if (!short_only && nr_slots) {
 		/* convert the unicode long name. 261 is maximum size
 		 * of unicode buffer. (13 * slots + nul) */
 		void *longname = unicode + 261;
 		int buf_size = PATH_MAX - (261 * sizeof(unicode[0]));
-		int long_len = utf8
-			? utf8_wcstombs(longname, unicode, buf_size)
-			: uni16_to_x8(longname, unicode, buf_size, uni_xlate, nls_io);
+		int long_len = fat_uni_to_x8(sbi, unicode, longname, buf_size);
 
 		if (!both) {
 			fill_name = longname;
@@ -640,15 +643,15 @@ parse_record:
 	}
 	if (filldir(dirent, fill_name, fill_len, *furrfu, inum,
 		    (de->attr & ATTR_DIR) ? DT_DIR : DT_REG) < 0)
-		goto FillFailed;
+		goto fill_failed;
 
-RecEnd:
+record_end:
 	furrfu = &lpos;
 	filp->f_pos = cpos;
-	goto GetNew;
-EODir:
+	goto get_new;
+end_of_dir:
 	filp->f_pos = cpos;
-FillFailed:
+fill_failed:
 	brelse(bh);
 	if (unicode)
 		__putname(unicode);
-- 
cgit v1.2.3


From 98a15160049fc1a0f822047f33ff513906a35567 Mon Sep 17 00:00:00 2001
From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Date: Fri, 25 Jul 2008 01:46:44 -0700
Subject: fat: use same logic in fat_search_long() and __fat_readdir()

This uses uses stack for shortname, and uses __getname() for longname in
fat_search_long() and __fat_readdir().  By this, it removes unneeded
__getname() for shortname.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fat/dir.c | 42 ++++++++++++++++++++++++++----------------
 1 file changed, 26 insertions(+), 16 deletions(-)

diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index a4410740627..96a1cad30da 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -324,6 +324,19 @@ parse_long:
 	return 0;
 }
 
+/*
+ * Maximum buffer size of short name.
+ * [(MSDOS_NAME + '.') * max one char + nul]
+ * For msdos style, ['.' (hidden) + MSDOS_NAME + '.' + nul]
+ */
+#define FAT_MAX_SHORT_SIZE	((MSDOS_NAME + 1) * NLS_MAX_CHARSET_SIZE + 1)
+/*
+ * Maximum buffer size of unicode chars from slots.
+ * [(max longname slots * 13 (size in a slot) + nul) * sizeof(wchar_t)]
+ */
+#define FAT_MAX_UNI_CHARS	((MSDOS_SLOTS - 1) * 13 + 1)
+#define FAT_MAX_UNI_SIZE	(FAT_MAX_UNI_CHARS * sizeof(wchar_t))
+
 /*
  * Return values: negative -> error, 0 -> not found, positive -> found,
  * value is the total amount of slots, including the shortname entry.
@@ -340,15 +353,11 @@ int fat_search_long(struct inode *inode, const unsigned char *name,
 	wchar_t bufuname[14];
 	wchar_t *unicode = NULL;
 	unsigned char work[MSDOS_NAME];
-	unsigned char *bufname = NULL;
+	unsigned char bufname[FAT_MAX_SHORT_SIZE];
 	unsigned short opt_shortname = sbi->options.shortname;
 	loff_t cpos = 0;
 	int chl, i, j, last_u, err, len;
 
-	bufname = __getname();
-	if (!bufname)
-		return -ENOMEM;
-
 	err = -ENOENT;
 	while (1) {
 		if (fat_get_entry(inode, &cpos, &bh, &de) == -1)
@@ -414,14 +423,17 @@ parse_record:
 
 		/* Compare shortname */
 		bufuname[last_u] = 0x0000;
-		len = fat_uni_to_x8(sbi, bufuname, bufname, PATH_MAX);
+		len = fat_uni_to_x8(sbi, bufuname, bufname, sizeof(bufname));
 		if (fat_name_match(sbi, name, name_len, bufname, len))
 			goto found;
 
 		if (nr_slots) {
+			void *longname = unicode + FAT_MAX_UNI_CHARS;
+			int size = PATH_MAX - FAT_MAX_UNI_SIZE;
+
 			/* Compare longname */
-			len = fat_uni_to_x8(sbi, unicode, bufname, PATH_MAX);
-			if (fat_name_match(sbi, name, name_len, bufname, len))
+			len = fat_uni_to_x8(sbi, unicode, longname, size);
+			if (fat_name_match(sbi, name, name_len, longname, len))
 				goto found;
 		}
 	}
@@ -435,8 +447,6 @@ found:
 	sinfo->i_pos = fat_make_i_pos(sb, sinfo->bh, sinfo->de);
 	err = 0;
 end_of_dir:
-	if (bufname)
-		__putname(bufname);
 	if (unicode)
 		__putname(unicode);
 
@@ -466,7 +476,8 @@ static int __fat_readdir(struct inode *inode, struct file *filp, void *dirent,
 	unsigned char nr_slots;
 	wchar_t bufuname[14];
 	wchar_t *unicode = NULL;
-	unsigned char c, work[MSDOS_NAME], bufname[56], *ptname = bufname;
+	unsigned char c, work[MSDOS_NAME];
+	unsigned char bufname[FAT_MAX_SHORT_SIZE], *ptname = bufname;
 	unsigned short opt_shortname = sbi->options.shortname;
 	int isvfat = sbi->options.isvfat;
 	int nocase = sbi->options.nocase;
@@ -620,11 +631,10 @@ parse_record:
 	fill_name = bufname;
 	fill_len = i;
 	if (!short_only && nr_slots) {
-		/* convert the unicode long name. 261 is maximum size
-		 * of unicode buffer. (13 * slots + nul) */
-		void *longname = unicode + 261;
-		int buf_size = PATH_MAX - (261 * sizeof(unicode[0]));
-		int long_len = fat_uni_to_x8(sbi, unicode, longname, buf_size);
+		void *longname = unicode + FAT_MAX_UNI_CHARS;
+		int long_len, size = PATH_MAX - FAT_MAX_UNI_SIZE;
+
+		long_len = fat_uni_to_x8(sbi, unicode, longname, size);
 
 		if (!both) {
 			fill_name = longname;
-- 
cgit v1.2.3


From dcd8c53f13f068ee039589d84fbd0baf686abc41 Mon Sep 17 00:00:00 2001
From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Date: Fri, 25 Jul 2008 01:46:44 -0700
Subject: fat: small optimization to __fat_readdir()

This removes unnecessary parsing for directory entries.

If short_only, we don't need to parse longname.  And if !both and it found
the longname, we don't need shortname.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fat/dir.c | 71 +++++++++++++++++++++++++++++++++---------------------------
 1 file changed, 39 insertions(+), 32 deletions(-)

diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 96a1cad30da..4c35477bc94 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -481,11 +481,11 @@ static int __fat_readdir(struct inode *inode, struct file *filp, void *dirent,
 	unsigned short opt_shortname = sbi->options.shortname;
 	int isvfat = sbi->options.isvfat;
 	int nocase = sbi->options.nocase;
-	const char *fill_name;
+	const char *fill_name = NULL;
 	unsigned long inum;
 	unsigned long lpos, dummy, *furrfu = &lpos;
 	loff_t cpos;
-	int chi, chl, i, i2, j, last, last_u, dotoffset = 0, fill_len;
+	int chi, chl, i, i2, j, last, last_u, dotoffset = 0, fill_len = 0;
 	int ret = 0;
 
 	lock_super(sb);
@@ -516,8 +516,11 @@ get_new:
 		goto end_of_dir;
 parse_record:
 	nr_slots = 0;
-	/* Check for long filename entry */
-	if (isvfat) {
+	/*
+	 * Check for long filename entry, but if short_only, we don't
+	 * need to parse long filename.
+	 */
+	if (isvfat && !short_only) {
 		if (de->name[0] == DELETED_FLAG)
 			goto record_end;
 		if (de->attr != ATTR_EXT && (de->attr & ATTR_VOLUME))
@@ -542,6 +545,18 @@ parse_record:
 			goto parse_record;
 		else if (status == PARSE_EOF)
 			goto end_of_dir;
+
+		if (nr_slots) {
+			void *longname = unicode + FAT_MAX_UNI_CHARS;
+			int size = PATH_MAX - FAT_MAX_UNI_SIZE;
+			int len = fat_uni_to_x8(sbi, unicode, longname, size);
+
+			fill_name = longname;
+			fill_len = len;
+			/* !both && !short_only, so we don't need shortname. */
+			if (!both)
+				goto start_filldir;
+		}
 	}
 
 	if (sbi->options.dotsOK) {
@@ -608,6 +623,26 @@ parse_record:
 	i = last + dotoffset;
 	j = last_u;
 
+	if (isvfat) {
+		bufuname[j] = 0x0000;
+		i = fat_uni_to_x8(sbi, bufuname, bufname, sizeof(bufname));
+	}
+	if (nr_slots) {
+		/* hack for fat_ioctl_filldir() */
+		struct fat_ioctl_filldir_callback *p = dirent;
+
+		p->longname = fill_name;
+		p->long_len = fill_len;
+		p->shortname = bufname;
+		p->short_len = i;
+		fill_name = NULL;
+		fill_len = 0;
+	} else {
+		fill_name = bufname;
+		fill_len = i;
+	}
+
+start_filldir:
 	lpos = cpos - (nr_slots + 1) * sizeof(struct msdos_dir_entry);
 	if (!memcmp(de->name, MSDOS_DOT, MSDOS_NAME))
 		inum = inode->i_ino;
@@ -623,34 +658,6 @@ parse_record:
 			inum = iunique(sb, MSDOS_ROOT_INO);
 	}
 
-	if (isvfat) {
-		bufuname[j] = 0x0000;
-		i = fat_uni_to_x8(sbi, bufuname, bufname, sizeof(bufname));
-	}
-
-	fill_name = bufname;
-	fill_len = i;
-	if (!short_only && nr_slots) {
-		void *longname = unicode + FAT_MAX_UNI_CHARS;
-		int long_len, size = PATH_MAX - FAT_MAX_UNI_SIZE;
-
-		long_len = fat_uni_to_x8(sbi, unicode, longname, size);
-
-		if (!both) {
-			fill_name = longname;
-			fill_len = long_len;
-		} else {
-			/* hack for fat_ioctl_filldir() */
-			struct fat_ioctl_filldir_callback *p = dirent;
-
-			p->longname = longname;
-			p->long_len = long_len;
-			p->shortname = bufname;
-			p->short_len = i;
-			fill_name = NULL;
-			fill_len = 0;
-		}
-	}
 	if (filldir(dirent, fill_name, fill_len, *furrfu, inum,
 		    (de->attr & ATTR_DIR) ? DT_DIR : DT_REG) < 0)
 		goto fill_failed;
-- 
cgit v1.2.3


From 7557bc66be629d19a402e752673708bfbb8b5e86 Mon Sep 17 00:00:00 2001
From: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Date: Fri, 25 Jul 2008 01:46:45 -0700
Subject: msdos fs: remove unsettable atari option

It has been impossible to set the option 'atari' of the MSDOS filesystem
for several years.  Since nobody seems to have missed it, let's remove its
remains.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/msdos/namei.c         | 18 ++++++------------
 include/linux/msdos_fs.h |  1 -
 2 files changed, 6 insertions(+), 13 deletions(-)

diff --git a/fs/msdos/namei.c b/fs/msdos/namei.c
index 1f7f2956412..e4ad6c6b753 100644
--- a/fs/msdos/namei.c
+++ b/fs/msdos/namei.c
@@ -14,12 +14,7 @@
 
 /* Characters that are undesirable in an MS-DOS file name */
 static unsigned char bad_chars[] = "*?<>|\"";
-static unsigned char bad_if_strict_pc[] = "+=,; ";
-/* GEMDOS is less restrictive */
-static unsigned char bad_if_strict_atari[] = " ";
-
-#define bad_if_strict(opts) \
-	((opts)->atari ? bad_if_strict_atari : bad_if_strict_pc)
+static unsigned char bad_if_strict[] = "+=,; ";
 
 /***** Formats an MS-DOS file name. Rejects invalid names. */
 static int msdos_format_name(const unsigned char *name, int len,
@@ -40,21 +35,20 @@ static int msdos_format_name(const unsigned char *name, int len,
 			/* Get rid of dot - test for it elsewhere */
 			name++;
 			len--;
-		} else if (!opts->atari)
+		} else
 			return -EINVAL;
 	}
 	/*
-	 * disallow names that _really_ start with a dot for MS-DOS,
-	 * GEMDOS does not care
+	 * disallow names that _really_ start with a dot
 	 */
-	space = !opts->atari;
+	space = 1;
 	c = 0;
 	for (walk = res; len && walk - res < 8; walk++) {
 		c = *name++;
 		len--;
 		if (opts->name_check != 'r' && strchr(bad_chars, c))
 			return -EINVAL;
-		if (opts->name_check == 's' && strchr(bad_if_strict(opts), c))
+		if (opts->name_check == 's' && strchr(bad_if_strict, c))
 			return -EINVAL;
 		if (c >= 'A' && c <= 'Z' && opts->name_check == 's')
 			return -EINVAL;
@@ -94,7 +88,7 @@ static int msdos_format_name(const unsigned char *name, int len,
 			if (opts->name_check != 'r' && strchr(bad_chars, c))
 				return -EINVAL;
 			if (opts->name_check == 's' &&
-			    strchr(bad_if_strict(opts), c))
+			    strchr(bad_if_strict, c))
 				return -EINVAL;
 			if (c < ' ' || c == ':' || c == '\\')
 				return -EINVAL;
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 5161394c789..3346c9c8f17 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -201,7 +201,6 @@ struct fat_mount_options {
 		 utf8:1,	  /* Use of UTF-8 character set (Default) */
 		 unicode_xlate:1, /* create escape sequences for unhandled Unicode */
 		 numtail:1,       /* Does first alias have a numeric '~1' type tail? */
-		 atari:1,         /* Use Atari GEMDOS variation of MS-DOS fs */
 		 flush:1,	  /* write things quickly */
 		 nocase:1,	  /* Does this need case conversion? 0=need case conversion*/
 		 usefree:1;	  /* Use free_clusters for FAT32 */
-- 
cgit v1.2.3


From cf6ae8b50e0ee3f764392dadd1970e3f03c40773 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:46:46 -0700
Subject: remove the in-kernel struct dirent{,64}

The kernel struct dirent{,64} were different from the ones in
userspace.

Even worse, we exported the kernel ones to userspace.

But after the fat usages are fixed we can remove the conflicting
kernel versions.

Reviewed-by: H. Peter Anvin <hpa@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/Kbuild   |  1 -
 include/linux/dirent.h | 20 --------------------
 2 files changed, 21 deletions(-)

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 71d70d1fbce..a18008ce7ab 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -189,7 +189,6 @@ unifdef-y += connector.h
 unifdef-y += cuda.h
 unifdef-y += cyclades.h
 unifdef-y += dccp.h
-unifdef-y += dirent.h
 unifdef-y += dlm.h
 unifdef-y += dlm_plock.h
 unifdef-y += edd.h
diff --git a/include/linux/dirent.h b/include/linux/dirent.h
index 5d6023b8780..f072fb8d10a 100644
--- a/include/linux/dirent.h
+++ b/include/linux/dirent.h
@@ -1,23 +1,6 @@
 #ifndef _LINUX_DIRENT_H
 #define _LINUX_DIRENT_H
 
-struct dirent {
-	long		d_ino;
-	__kernel_off_t	d_off;
-	unsigned short	d_reclen;
-	char		d_name[256]; /* We must not include limits.h! */
-};
-
-struct dirent64 {
-	__u64		d_ino;
-	__s64		d_off;
-	unsigned short	d_reclen;
-	unsigned char	d_type;
-	char		d_name[256];
-};
-
-#ifdef __KERNEL__
-
 struct linux_dirent64 {
 	u64		d_ino;
 	s64		d_off;
@@ -26,7 +9,4 @@ struct linux_dirent64 {
 	char		d_name[0];
 };
 
-#endif	/* __KERNEL__ */
-
-
 #endif
-- 
cgit v1.2.3


From e8938a62a85d1f487e02c3b01955b47c9598f6d2 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:46:46 -0700
Subject: remove unused #include <linux/dirent.h>'s

Remove some unused #include <linux/dirent.h>'s.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mips/kernel/linux32.c | 1 -
 fs/compat_ioctl.c          | 1 -
 fs/smbfs/cache.c           | 1 -
 fs/smbfs/proc.c            | 1 -
 include/linux/nfsd/nfsd.h  | 1 -
 5 files changed, 5 deletions(-)

diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index c266211ed65..2fefb14414b 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -11,7 +11,6 @@
 #include <linux/file.h>
 #include <linux/smp_lock.h>
 #include <linux/highuid.h>
-#include <linux/dirent.h>
 #include <linux/resource.h>
 #include <linux/highmem.h>
 #include <linux/time.h>
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 18e2c548161..5235c67e759 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -25,7 +25,6 @@
 #include <linux/slab.h>
 #include <linux/raid/md.h>
 #include <linux/kd.h>
-#include <linux/dirent.h>
 #include <linux/route.h>
 #include <linux/in6.h>
 #include <linux/ipv6_route.h>
diff --git a/fs/smbfs/cache.c b/fs/smbfs/cache.c
index 8182f0542a2..8c177eb7e34 100644
--- a/fs/smbfs/cache.c
+++ b/fs/smbfs/cache.c
@@ -13,7 +13,6 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
-#include <linux/dirent.h>
 #include <linux/smb_fs.h>
 #include <linux/pagemap.h>
 #include <linux/net.h>
diff --git a/fs/smbfs/proc.c b/fs/smbfs/proc.c
index d517a27b7f4..ee536e8a649 100644
--- a/fs/smbfs/proc.c
+++ b/fs/smbfs/proc.c
@@ -16,7 +16,6 @@
 #include <linux/stat.h>
 #include <linux/fcntl.h>
 #include <linux/dcache.h>
-#include <linux/dirent.h>
 #include <linux/nls.h>
 #include <linux/smp_lock.h>
 #include <linux/net.h>
diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h
index a2861d95ecc..108f47e5fd9 100644
--- a/include/linux/nfsd/nfsd.h
+++ b/include/linux/nfsd/nfsd.h
@@ -12,7 +12,6 @@
 
 #include <linux/types.h>
 #include <linux/unistd.h>
-#include <linux/dirent.h>
 #include <linux/fs.h>
 #include <linux/posix_acl.h>
 #include <linux/mount.h>
-- 
cgit v1.2.3


From b271e067c896ad4082b15e96077675d08db40625 Mon Sep 17 00:00:00 2001
From: Joe Peterson <joe@skyrush.com>
Date: Fri, 25 Jul 2008 01:46:47 -0700
Subject: fatfs: add UTC timestamp option

Provide a new mount option ("tz=UTC") for DOS (vfat/msdos) filesystems,
allowing timestamps to be in coordinated universal time (UTC) rather than
local time in applications where doing this is advantageous.

In particular, portable devices that use fat/vfat (such as digital
cameras) can benefit from using UTC in their internal clocks, thus
avoiding daylight saving time errors and general time ambiguity issues.
The user of the device does not have to worry about changing the time when
moving from place or when daylight saving changes.

The new mount option, when set, disables the counter-adjustment that Linux
currently makes to FAT timestamp info in anticipation of the normal
userspace time zone correction.  When used in this new mode, all daylight
saving time and time zone handling is done in userspace as is normal for
many other filesystems (like ext3).  The default mode, which remains
unchanged, is still appropriate when mounting volumes written in Windows
(because of its use of local time).

I originally based this patch on one submitted last year by Paul Collins,
but I updated it to work with current source and changed variable/option
naming.  Ogawa Hirofumi (who maintains these filesystems) and I discussed
this patch at length on lkml, and he suggested using the option name in
the attached version of the patch.  Barry Bouwsma pointed out a good
addition to the patch as well.

Signed-off-by: Joe Peterson <joe@skyrush.com>
Signed-off-by: Paul Collins <paul@ondioline.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Barry Bouwsma <free_beer_for_all@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fat/dir.c             |  2 +-
 fs/fat/inode.c           | 27 ++++++++++++++++++++-------
 fs/fat/misc.c            | 10 ++++++----
 fs/msdos/namei.c         |  3 ++-
 fs/vfat/namei.c          |  2 +-
 include/linux/msdos_fs.h |  8 +++++---
 6 files changed, 35 insertions(+), 17 deletions(-)

diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 4c35477bc94..cd4a0162e10 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -1101,7 +1101,7 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts)
 		goto error_free;
 	}
 
-	fat_date_unix2dos(ts->tv_sec, &time, &date);
+	fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc);
 
 	de = (struct msdos_dir_entry *)bhs[0]->b_data;
 	/* filling the new directory slots ("." and ".." entries) */
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 60deb5fd118..23676f9d79c 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -382,17 +382,20 @@ static int fat_fill_inode(struct inode *inode, struct msdos_dir_entry *de)
 	inode->i_blocks = ((inode->i_size + (sbi->cluster_size - 1))
 			   & ~((loff_t)sbi->cluster_size - 1)) >> 9;
 	inode->i_mtime.tv_sec =
-		date_dos2unix(le16_to_cpu(de->time), le16_to_cpu(de->date));
+		date_dos2unix(le16_to_cpu(de->time), le16_to_cpu(de->date),
+			      sbi->options.tz_utc);
 	inode->i_mtime.tv_nsec = 0;
 	if (sbi->options.isvfat) {
 		int secs = de->ctime_cs / 100;
 		int csecs = de->ctime_cs % 100;
 		inode->i_ctime.tv_sec  =
 			date_dos2unix(le16_to_cpu(de->ctime),
-				      le16_to_cpu(de->cdate)) + secs;
+				      le16_to_cpu(de->cdate),
+				      sbi->options.tz_utc) + secs;
 		inode->i_ctime.tv_nsec = csecs * 10000000;
 		inode->i_atime.tv_sec =
-			date_dos2unix(0, le16_to_cpu(de->adate));
+			date_dos2unix(0, le16_to_cpu(de->adate),
+				      sbi->options.tz_utc);
 		inode->i_atime.tv_nsec = 0;
 	} else
 		inode->i_ctime = inode->i_atime = inode->i_mtime;
@@ -591,11 +594,14 @@ retry:
 	raw_entry->attr = fat_attr(inode);
 	raw_entry->start = cpu_to_le16(MSDOS_I(inode)->i_logstart);
 	raw_entry->starthi = cpu_to_le16(MSDOS_I(inode)->i_logstart >> 16);
-	fat_date_unix2dos(inode->i_mtime.tv_sec, &raw_entry->time, &raw_entry->date);
+	fat_date_unix2dos(inode->i_mtime.tv_sec, &raw_entry->time,
+			  &raw_entry->date, sbi->options.tz_utc);
 	if (sbi->options.isvfat) {
 		__le16 atime;
-		fat_date_unix2dos(inode->i_ctime.tv_sec,&raw_entry->ctime,&raw_entry->cdate);
-		fat_date_unix2dos(inode->i_atime.tv_sec,&atime,&raw_entry->adate);
+		fat_date_unix2dos(inode->i_ctime.tv_sec, &raw_entry->ctime,
+				  &raw_entry->cdate, sbi->options.tz_utc);
+		fat_date_unix2dos(inode->i_atime.tv_sec, &atime,
+				  &raw_entry->adate, sbi->options.tz_utc);
 		raw_entry->ctime_cs = (inode->i_ctime.tv_sec & 1) * 100 +
 			inode->i_ctime.tv_nsec / 10000000;
 	}
@@ -836,6 +842,8 @@ static int fat_show_options(struct seq_file *m, struct vfsmount *mnt)
 	}
 	if (sbi->options.flush)
 		seq_puts(m, ",flush");
+	if (opts->tz_utc)
+		seq_puts(m, ",tz=UTC");
 
 	return 0;
 }
@@ -848,7 +856,7 @@ enum {
 	Opt_charset, Opt_shortname_lower, Opt_shortname_win95,
 	Opt_shortname_winnt, Opt_shortname_mixed, Opt_utf8_no, Opt_utf8_yes,
 	Opt_uni_xl_no, Opt_uni_xl_yes, Opt_nonumtail_no, Opt_nonumtail_yes,
-	Opt_obsolate, Opt_flush, Opt_err,
+	Opt_obsolate, Opt_flush, Opt_tz_utc, Opt_err,
 };
 
 static match_table_t fat_tokens = {
@@ -883,6 +891,7 @@ static match_table_t fat_tokens = {
 	{Opt_obsolate, "cvf_options=%100s"},
 	{Opt_obsolate, "posix"},
 	{Opt_flush, "flush"},
+	{Opt_tz_utc, "tz=UTC"},
 	{Opt_err, NULL},
 };
 static match_table_t msdos_tokens = {
@@ -947,6 +956,7 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 	opts->utf8 = opts->unicode_xlate = 0;
 	opts->numtail = 1;
 	opts->usefree = opts->nocase = 0;
+	opts->tz_utc = 0;
 	*debug = 0;
 
 	if (!options)
@@ -1036,6 +1046,9 @@ static int parse_options(char *options, int is_vfat, int silent, int *debug,
 		case Opt_flush:
 			opts->flush = 1;
 			break;
+		case Opt_tz_utc:
+			opts->tz_utc = 1;
+			break;
 
 		/* msdos specific */
 		case Opt_dots:
diff --git a/fs/fat/misc.c b/fs/fat/misc.c
index 61f23511eac..79fb98ad36d 100644
--- a/fs/fat/misc.c
+++ b/fs/fat/misc.c
@@ -142,7 +142,7 @@ static int day_n[] = {
 };
 
 /* Convert a MS-DOS time/date pair to a UNIX date (seconds since 1 1 70). */
-int date_dos2unix(unsigned short time, unsigned short date)
+int date_dos2unix(unsigned short time, unsigned short date, int tz_utc)
 {
 	int month, year, secs;
 
@@ -156,16 +156,18 @@ int date_dos2unix(unsigned short time, unsigned short date)
 	    ((date & 31)-1+day_n[month]+(year/4)+year*365-((year & 3) == 0 &&
 	    month < 2 ? 1 : 0)+3653);
 			/* days since 1.1.70 plus 80's leap day */
-	secs += sys_tz.tz_minuteswest*60;
+	if (!tz_utc)
+		secs += sys_tz.tz_minuteswest*60;
 	return secs;
 }
 
 /* Convert linear UNIX date to a MS-DOS time/date pair. */
-void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date)
+void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date, int tz_utc)
 {
 	int day, year, nl_day, month;
 
-	unix_date -= sys_tz.tz_minuteswest*60;
+	if (!tz_utc)
+		unix_date -= sys_tz.tz_minuteswest*60;
 
 	/* Jan 1 GMT 00:00:00 1980. But what about another time zone? */
 	if (unix_date < 315532800)
diff --git a/fs/msdos/namei.c b/fs/msdos/namei.c
index e4ad6c6b753..e844b9809d2 100644
--- a/fs/msdos/namei.c
+++ b/fs/msdos/namei.c
@@ -237,6 +237,7 @@ static int msdos_add_entry(struct inode *dir, const unsigned char *name,
 			   int is_dir, int is_hid, int cluster,
 			   struct timespec *ts, struct fat_slot_info *sinfo)
 {
+	struct msdos_sb_info *sbi = MSDOS_SB(dir->i_sb);
 	struct msdos_dir_entry de;
 	__le16 time, date;
 	int err;
@@ -246,7 +247,7 @@ static int msdos_add_entry(struct inode *dir, const unsigned char *name,
 	if (is_hid)
 		de.attr |= ATTR_HIDDEN;
 	de.lcase = 0;
-	fat_date_unix2dos(ts->tv_sec, &time, &date);
+	fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc);
 	de.cdate = de.adate = 0;
 	de.ctime = 0;
 	de.ctime_cs = 0;
diff --git a/fs/vfat/namei.c b/fs/vfat/namei.c
index b546ba69be8..155c10b4adb 100644
--- a/fs/vfat/namei.c
+++ b/fs/vfat/namei.c
@@ -621,7 +621,7 @@ shortname:
 	memcpy(de->name, msdos_name, MSDOS_NAME);
 	de->attr = is_dir ? ATTR_DIR : ATTR_ARCH;
 	de->lcase = lcase;
-	fat_date_unix2dos(ts->tv_sec, &time, &date);
+	fat_date_unix2dos(ts->tv_sec, &time, &date, sbi->options.tz_utc);
 	de->time = de->ctime = time;
 	de->date = de->cdate = de->adate = date;
 	de->ctime_cs = 0;
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 3346c9c8f17..ba63858056c 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -203,7 +203,8 @@ struct fat_mount_options {
 		 numtail:1,       /* Does first alias have a numeric '~1' type tail? */
 		 flush:1,	  /* write things quickly */
 		 nocase:1,	  /* Does this need case conversion? 0=need case conversion*/
-		 usefree:1;	  /* Use free_clusters for FAT32 */
+		 usefree:1,	  /* Use free_clusters for FAT32 */
+		 tz_utc:1;	  /* Filesystem timestamps are in UTC */
 };
 
 #define FAT_HASH_BITS	8
@@ -434,8 +435,9 @@ extern int fat_flush_inodes(struct super_block *sb, struct inode *i1,
 extern void fat_fs_panic(struct super_block *s, const char *fmt, ...);
 extern void fat_clusters_flush(struct super_block *sb);
 extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
-extern int date_dos2unix(unsigned short time, unsigned short date);
-extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date);
+extern int date_dos2unix(unsigned short time, unsigned short date, int tz_utc);
+extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date,
+			      int tz_utc);
 extern int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs);
 
 int fat_cache_init(void);
-- 
cgit v1.2.3


From 41003cde95e7e976d3876dbdcdc83dd0a9059279 Mon Sep 17 00:00:00 2001
From: Joe Peterson <joe@skyrush.com>
Date: Fri, 25 Jul 2008 01:46:48 -0700
Subject: UTC timestamp option for FAT filesystems fix

Signed-off-by: Joe Peterson <joe@skyrush.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/vfat.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index 2d5e1e582e1..bbac4f1d905 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -96,6 +96,14 @@ shortname=lower|win95|winnt|mixed
 			emulate the Windows 95 rule for create.
 		 Default setting is `lower'.
 
+tz=UTC        -- Interpret timestamps as UTC rather than local time.
+                 This option disables the conversion of timestamps
+                 between local time (as used by Windows on FAT) and UTC
+                 (which Linux uses internally).  This is particuluarly
+                 useful when mounting devices (like digital cameras)
+                 that are set to UTC in order to avoid the pitfalls of
+                 local time.
+
 <bool>: 0,1,yes,no,true,false
 
 TODO
-- 
cgit v1.2.3


From b48d380541f634663b71766005838edbb7261685 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:49 -0700
Subject: quota: fix possible infinite loop in quota code

When quota structure is going to be dropped and it is dirty, quota code tries
to write it.  If the write fails for some reason (e.  g.  transaction cannot
be started because the journal is aborted), we try writing again and again and
again...  Fix the problem by clearing the dirty bit even if the write failed.

(akpm: for 2.6.27, 2.6.26.x and 2.6.25.x)

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: dingdinghua <dingdinghua85@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/dquot.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/fs/dquot.c b/fs/dquot.c
index 5ac77da1995..ad88cf6fcba 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -562,6 +562,8 @@ static struct shrinker dqcache_shrinker = {
  */
 static void dqput(struct dquot *dquot)
 {
+	int ret;
+
 	if (!dquot)
 		return;
 #ifdef __DQUOT_PARANOIA
@@ -594,7 +596,19 @@ we_slept:
 	if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && dquot_dirty(dquot)) {
 		spin_unlock(&dq_list_lock);
 		/* Commit dquot before releasing */
-		dquot->dq_sb->dq_op->write_dquot(dquot);
+		ret = dquot->dq_sb->dq_op->write_dquot(dquot);
+		if (ret < 0) {
+			printk(KERN_ERR "VFS: cannot write quota structure on "
+				"device %s (error %d). Quota may get out of "
+				"sync!\n", dquot->dq_sb->s_id, ret);
+			/*
+			 * We clear dirty bit anyway, so that we avoid
+			 * infinite loop here
+			 */
+			spin_lock(&dq_list_lock);
+			clear_dquot_dirty(dquot);
+			spin_unlock(&dq_list_lock);
+		}
 		goto we_slept;
 	}
 	/* Clear flag in case dquot was inactive (something bad happened) */
-- 
cgit v1.2.3


From b85f4b87a511bea86dac68c4f0fabaee2cac6c4c Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:50 -0700
Subject: quota: rename quota functions from upper case, make bigger ones
 non-inline

Cleanup quotaops.h: Rename functions from uppercase to lowercase (and
define backward compatibility macros), move larger functions to dquot.c
and make them non-inline.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/dquot.c               |  53 +++++++++++
 include/linux/quotaops.h | 226 ++++++++++++++++++++++-------------------------
 2 files changed, 160 insertions(+), 119 deletions(-)

diff --git a/fs/dquot.c b/fs/dquot.c
index ad88cf6fcba..0bcaf970bbb 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -1153,6 +1153,28 @@ int dquot_drop(struct inode *inode)
 	return 0;
 }
 
+/* Wrapper to remove references to quota structures from inode */
+void vfs_dq_drop(struct inode *inode)
+{
+	/* Here we can get arbitrary inode from clear_inode() so we have
+	 * to be careful. OTOH we don't need locking as quota operations
+	 * are allowed to change only at mount time */
+	if (!IS_NOQUOTA(inode) && inode->i_sb && inode->i_sb->dq_op
+	    && inode->i_sb->dq_op->drop) {
+		int cnt;
+		/* Test before calling to rule out calls from proc and such
+                 * where we are not allowed to block. Note that this is
+		 * actually reliable test even without the lock - the caller
+		 * must assure that nobody can come after the DQUOT_DROP and
+		 * add quota pointers back anyway */
+		for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+			if (inode->i_dquot[cnt] != NODQUOT)
+				break;
+		if (cnt < MAXQUOTAS)
+			inode->i_sb->dq_op->drop(inode);
+	}
+}
+
 /*
  * Following four functions update i_blocks+i_bytes fields and
  * quota information (together with appropriate checks)
@@ -1426,6 +1448,18 @@ warn_put_all:
 	return ret;
 }
 
+/* Wrapper for transferring ownership of an inode */
+int vfs_dq_transfer(struct inode *inode, struct iattr *iattr)
+{
+	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode)) {
+		vfs_dq_init(inode);
+		if (inode->i_sb->dq_op->transfer(inode, iattr) == NO_QUOTA)
+			return 1;
+	}
+	return 0;
+}
+
+
 /*
  * Write info of quota file to disk
  */
@@ -1766,6 +1800,22 @@ out:
 	return error;
 }
 
+/* Wrapper to turn on quotas when remounting rw */
+int vfs_dq_quota_on_remount(struct super_block *sb)
+{
+	int cnt;
+	int ret = 0, err;
+
+	if (!sb->s_qcop || !sb->s_qcop->quota_on)
+		return -ENOSYS;
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+		err = sb->s_qcop->quota_on(sb, cnt, 0, NULL, 1);
+		if (err < 0 && !ret)
+			ret = err;
+	}
+	return ret;
+}
+
 /* Generic routine for getting common part of quota structure */
 static void do_get_dqblk(struct dquot *dquot, struct if_dqblk *di)
 {
@@ -2101,8 +2151,11 @@ EXPORT_SYMBOL(dquot_release);
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 EXPORT_SYMBOL(dquot_initialize);
 EXPORT_SYMBOL(dquot_drop);
+EXPORT_SYMBOL(vfs_dq_drop);
 EXPORT_SYMBOL(dquot_alloc_space);
 EXPORT_SYMBOL(dquot_alloc_inode);
 EXPORT_SYMBOL(dquot_free_space);
 EXPORT_SYMBOL(dquot_free_inode);
 EXPORT_SYMBOL(dquot_transfer);
+EXPORT_SYMBOL(vfs_dq_transfer);
+EXPORT_SYMBOL(vfs_dq_quota_on_remount);
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index f8670205385..0c8f9fe462a 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -19,34 +19,38 @@
 /*
  * declaration of quota_function calls in kernel.
  */
-extern void sync_dquots(struct super_block *sb, int type);
-
-extern int dquot_initialize(struct inode *inode, int type);
-extern int dquot_drop(struct inode *inode);
-
-extern int dquot_alloc_space(struct inode *inode, qsize_t number, int prealloc);
-extern int dquot_alloc_inode(const struct inode *inode, unsigned long number);
-
-extern int dquot_free_space(struct inode *inode, qsize_t number);
-extern int dquot_free_inode(const struct inode *inode, unsigned long number);
-
-extern int dquot_transfer(struct inode *inode, struct iattr *iattr);
-extern int dquot_commit(struct dquot *dquot);
-extern int dquot_acquire(struct dquot *dquot);
-extern int dquot_release(struct dquot *dquot);
-extern int dquot_commit_info(struct super_block *sb, int type);
-extern int dquot_mark_dquot_dirty(struct dquot *dquot);
-
-extern int vfs_quota_on(struct super_block *sb, int type, int format_id,
-		char *path, int remount);
-extern int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
-		int format_id, int type);
-extern int vfs_quota_off(struct super_block *sb, int type, int remount);
-extern int vfs_quota_sync(struct super_block *sb, int type);
-extern int vfs_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-extern int vfs_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-extern int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
-extern int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+void sync_dquots(struct super_block *sb, int type);
+
+int dquot_initialize(struct inode *inode, int type);
+int dquot_drop(struct inode *inode);
+
+int dquot_alloc_space(struct inode *inode, qsize_t number, int prealloc);
+int dquot_alloc_inode(const struct inode *inode, unsigned long number);
+
+int dquot_free_space(struct inode *inode, qsize_t number);
+int dquot_free_inode(const struct inode *inode, unsigned long number);
+
+int dquot_transfer(struct inode *inode, struct iattr *iattr);
+int dquot_commit(struct dquot *dquot);
+int dquot_acquire(struct dquot *dquot);
+int dquot_release(struct dquot *dquot);
+int dquot_commit_info(struct super_block *sb, int type);
+int dquot_mark_dquot_dirty(struct dquot *dquot);
+
+int vfs_quota_on(struct super_block *sb, int type, int format_id,
+ 	char *path, int remount);
+int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
+ 	int format_id, int type);
+int vfs_quota_off(struct super_block *sb, int type, int remount);
+int vfs_quota_sync(struct super_block *sb, int type);
+int vfs_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int vfs_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+
+void vfs_dq_drop(struct inode *inode);
+int vfs_dq_transfer(struct inode *inode, struct iattr *iattr);
+int vfs_dq_quota_on_remount(struct super_block *sb);
 
 /*
  * Operations supported for diskquotas.
@@ -59,38 +63,16 @@ extern struct quotactl_ops vfs_quotactl_ops;
 
 /* It is better to call this function outside of any transaction as it might
  * need a lot of space in journal for dquot structure allocation. */
-static inline void DQUOT_INIT(struct inode *inode)
+static inline void vfs_dq_init(struct inode *inode)
 {
 	BUG_ON(!inode->i_sb);
 	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode))
 		inode->i_sb->dq_op->initialize(inode, -1);
 }
 
-/* The same as with DQUOT_INIT */
-static inline void DQUOT_DROP(struct inode *inode)
-{
-	/* Here we can get arbitrary inode from clear_inode() so we have
-	 * to be careful. OTOH we don't need locking as quota operations
-	 * are allowed to change only at mount time */
-	if (!IS_NOQUOTA(inode) && inode->i_sb && inode->i_sb->dq_op
-	    && inode->i_sb->dq_op->drop) {
-		int cnt;
-		/* Test before calling to rule out calls from proc and such
-                 * where we are not allowed to block. Note that this is
-		 * actually reliable test even without the lock - the caller
-		 * must assure that nobody can come after the DQUOT_DROP and
-		 * add quota pointers back anyway */
-		for (cnt = 0; cnt < MAXQUOTAS; cnt++)
-			if (inode->i_dquot[cnt] != NODQUOT)
-				break;
-		if (cnt < MAXQUOTAS)
-			inode->i_sb->dq_op->drop(inode);
-	}
-}
-
 /* The following allocation/freeing/transfer functions *must* be called inside
  * a transaction (deadlocks possible otherwise) */
-static inline int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	if (sb_any_quota_enabled(inode->i_sb)) {
 		/* Used space is updated in alloc_space() */
@@ -102,15 +84,15 @@ static inline int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
 	return 0;
 }
 
-static inline int DQUOT_PREALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space(struct inode *inode, qsize_t nr)
 {
 	int ret;
-        if (!(ret =  DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr)))
+        if (!(ret =  vfs_dq_prealloc_space_nodirty(inode, nr)))
 		mark_inode_dirty(inode);
 	return ret;
 }
 
-static inline int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	if (sb_any_quota_enabled(inode->i_sb)) {
 		/* Used space is updated in alloc_space() */
@@ -122,25 +104,25 @@ static inline int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
 	return 0;
 }
 
-static inline int DQUOT_ALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space(struct inode *inode, qsize_t nr)
 {
 	int ret;
-	if (!(ret = DQUOT_ALLOC_SPACE_NODIRTY(inode, nr)))
+	if (!(ret = vfs_dq_alloc_space_nodirty(inode, nr)))
 		mark_inode_dirty(inode);
 	return ret;
 }
 
-static inline int DQUOT_ALLOC_INODE(struct inode *inode)
+static inline int vfs_dq_alloc_inode(struct inode *inode)
 {
 	if (sb_any_quota_enabled(inode->i_sb)) {
-		DQUOT_INIT(inode);
+		vfs_dq_init(inode);
 		if (inode->i_sb->dq_op->alloc_inode(inode, 1) == NO_QUOTA)
 			return 1;
 	}
 	return 0;
 }
 
-static inline void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	if (sb_any_quota_enabled(inode->i_sb))
 		inode->i_sb->dq_op->free_space(inode, nr);
@@ -148,35 +130,25 @@ static inline void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
 		inode_sub_bytes(inode, nr);
 }
 
-static inline void DQUOT_FREE_SPACE(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE_NODIRTY(inode, nr);
+	vfs_dq_free_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 }
 
-static inline void DQUOT_FREE_INODE(struct inode *inode)
+static inline void vfs_dq_free_inode(struct inode *inode)
 {
 	if (sb_any_quota_enabled(inode->i_sb))
 		inode->i_sb->dq_op->free_inode(inode, 1);
 }
 
-static inline int DQUOT_TRANSFER(struct inode *inode, struct iattr *iattr)
-{
-	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode)) {
-		DQUOT_INIT(inode);
-		if (inode->i_sb->dq_op->transfer(inode, iattr) == NO_QUOTA)
-			return 1;
-	}
-	return 0;
-}
-
 /* The following two functions cannot be called inside a transaction */
-static inline void DQUOT_SYNC(struct super_block *sb)
+static inline void vfs_dq_sync(struct super_block *sb)
 {
 	sync_dquots(sb, -1);
 }
 
-static inline int DQUOT_OFF(struct super_block *sb, int remount)
+static inline int vfs_dq_off(struct super_block *sb, int remount)
 {
 	int ret = -ENOSYS;
 
@@ -185,21 +157,6 @@ static inline int DQUOT_OFF(struct super_block *sb, int remount)
 	return ret;
 }
 
-static inline int DQUOT_ON_REMOUNT(struct super_block *sb)
-{
-	int cnt;
-	int ret = 0, err;
-
-	if (!sb->s_qcop || !sb->s_qcop->quota_on)
-		return -ENOSYS;
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		err = sb->s_qcop->quota_on(sb, cnt, 0, NULL, 1);
-		if (err < 0 && !ret)
-			ret = err;
-	}
-	return ret;
-}
-
 #else
 
 /*
@@ -208,113 +165,144 @@ static inline int DQUOT_ON_REMOUNT(struct super_block *sb)
 #define sb_dquot_ops				(NULL)
 #define sb_quotactl_ops				(NULL)
 
-static inline void DQUOT_INIT(struct inode *inode)
+static inline void vfs_dq_init(struct inode *inode)
 {
 }
 
-static inline void DQUOT_DROP(struct inode *inode)
+static inline void vfs_dq_drop(struct inode *inode)
 {
 }
 
-static inline int DQUOT_ALLOC_INODE(struct inode *inode)
+static inline int vfs_dq_alloc_inode(struct inode *inode)
 {
 	return 0;
 }
 
-static inline void DQUOT_FREE_INODE(struct inode *inode)
+static inline void vfs_dq_free_inode(struct inode *inode)
 {
 }
 
-static inline void DQUOT_SYNC(struct super_block *sb)
+static inline void vfs_dq_sync(struct super_block *sb)
 {
 }
 
-static inline int DQUOT_OFF(struct super_block *sb, int remount)
+static inline int vfs_dq_off(struct super_block *sb, int remount)
 {
 	return 0;
 }
 
-static inline int DQUOT_ON_REMOUNT(struct super_block *sb)
+static inline int vfs_dq_quota_on_remount(struct super_block *sb)
 {
 	return 0;
 }
 
-static inline int DQUOT_TRANSFER(struct inode *inode, struct iattr *iattr)
+static inline int vfs_dq_transfer(struct inode *inode, struct iattr *iattr)
 {
 	return 0;
 }
 
-static inline int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	inode_add_bytes(inode, nr);
 	return 0;
 }
 
-static inline int DQUOT_PREALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr);
+	vfs_dq_prealloc_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 	return 0;
 }
 
-static inline int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	inode_add_bytes(inode, nr);
 	return 0;
 }
 
-static inline int DQUOT_ALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_ALLOC_SPACE_NODIRTY(inode, nr);
+	vfs_dq_alloc_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 	return 0;
 }
 
-static inline void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	inode_sub_bytes(inode, nr);
 }
 
-static inline void DQUOT_FREE_SPACE(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE_NODIRTY(inode, nr);
+	vfs_dq_free_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 }	
 
 #endif /* CONFIG_QUOTA */
 
-static inline int DQUOT_PREALLOC_BLOCK_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_block_nodirty(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_PREALLOC_SPACE_NODIRTY(inode,
+	return vfs_dq_prealloc_space_nodirty(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline int DQUOT_PREALLOC_BLOCK(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_block(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_PREALLOC_SPACE(inode,
+	return vfs_dq_prealloc_space(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline int DQUOT_ALLOC_BLOCK_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_block_nodirty(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_ALLOC_SPACE_NODIRTY(inode,
+ 	return vfs_dq_alloc_space_nodirty(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline int DQUOT_ALLOC_BLOCK(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_block(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_ALLOC_SPACE(inode,
+	return vfs_dq_alloc_space(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline void DQUOT_FREE_BLOCK_NODIRTY(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_block_nodirty(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE_NODIRTY(inode, nr << inode->i_sb->s_blocksize_bits);
+	vfs_dq_free_space_nodirty(inode, nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline void DQUOT_FREE_BLOCK(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_block(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE(inode, nr << inode->i_sb->s_blocksize_bits);
+	vfs_dq_free_space(inode, nr << inode->i_sb->s_blocksize_bits);
 }
 
+/*
+ * Define uppercase equivalents for compatibility with old function names
+ * Can go away when we think all users have been converted (15/04/2008)
+ */
+#define DQUOT_INIT(inode) vfs_dq_init(inode)
+#define DQUOT_DROP(inode) vfs_dq_drop(inode)
+#define DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr) \
+				vfs_dq_prealloc_space_nodirty(inode, nr)
+#define DQUOT_PREALLOC_SPACE(inode, nr) vfs_dq_prealloc_space(inode, nr)
+#define DQUOT_ALLOC_SPACE_NODIRTY(inode, nr) \
+				vfs_dq_alloc_space_nodirty(inode, nr)
+#define DQUOT_ALLOC_SPACE(inode, nr) vfs_dq_alloc_space(inode, nr)
+#define DQUOT_PREALLOC_BLOCK_NODIRTY(inode, nr) \
+				vfs_dq_prealloc_block_nodirty(inode, nr)
+#define DQUOT_PREALLOC_BLOCK(inode, nr) vfs_dq_prealloc_block(inode, nr)
+#define DQUOT_ALLOC_BLOCK_NODIRTY(inode, nr) \
+				vfs_dq_alloc_block_nodirty(inode, nr)
+#define DQUOT_ALLOC_BLOCK(inode, nr) vfs_dq_alloc_block(inode, nr)
+#define DQUOT_ALLOC_INODE(inode) vfs_dq_alloc_inode(inode)
+#define DQUOT_FREE_SPACE_NODIRTY(inode, nr) \
+				vfs_dq_free_space_nodirty(inode, nr)
+#define DQUOT_FREE_SPACE(inode, nr) vfs_dq_free_space(inode, nr)
+#define DQUOT_FREE_BLOCK_NODIRTY(inode, nr) \
+				vfs_dq_free_block_nodirty(inode, nr)
+#define DQUOT_FREE_BLOCK(inode, nr) vfs_dq_free_block(inode, nr)
+#define DQUOT_FREE_INODE(inode) vfs_dq_free_inode(inode)
+#define DQUOT_TRANSFER(inode, iattr) vfs_dq_transfer(inode, iattr)
+#define DQUOT_SYNC(sb) vfs_dq_sync(sb)
+#define DQUOT_OFF(sb, remount) vfs_dq_off(sb, remount)
+#define DQUOT_ON_REMOUNT(sb) vfs_dq_quota_on_remount(sb)
+
 #endif /* _LINUX_QUOTAOPS_ */
-- 
cgit v1.2.3


From 02a55ca87185e114e5d298a8d00608501dbabf67 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:50 -0700
Subject: quota: cleanup loop in sync_dquots()

Make loop in sync_dquots() checking whether there's something to write
more readable, remove useless variable and macro info_any_dirty() which
is used only in this place.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: "Vegard Nossum" <vegard.nossum@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/quota.c            | 18 ++++++++++++------
 include/linux/quota.h |  2 --
 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/fs/quota.c b/fs/quota.c
index db1cc9f3c7a..7f4386ebc23 100644
--- a/fs/quota.c
+++ b/fs/quota.c
@@ -186,7 +186,7 @@ static void quota_sync_sb(struct super_block *sb, int type)
 
 void sync_dquots(struct super_block *sb, int type)
 {
-	int cnt, dirty;
+	int cnt;
 
 	if (sb) {
 		if (sb->s_qcop->quota_sync)
@@ -198,11 +198,17 @@ void sync_dquots(struct super_block *sb, int type)
 restart:
 	list_for_each_entry(sb, &super_blocks, s_list) {
 		/* This test just improves performance so it needn't be reliable... */
-		for (cnt = 0, dirty = 0; cnt < MAXQUOTAS; cnt++)
-			if ((type == cnt || type == -1) && sb_has_quota_enabled(sb, cnt)
-			    && info_any_dirty(&sb_dqopt(sb)->info[cnt]))
-				dirty = 1;
-		if (!dirty)
+		for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+			if (type != -1 && type != cnt)
+				continue;
+			if (!sb_has_quota_enabled(sb, cnt))
+				continue;
+			if (!info_dirty(&sb_dqopt(sb)->info[cnt]) &&
+			    list_empty(&sb_dqopt(sb)->info[cnt].dqi_dirty_list))
+				continue;
+			break;
+		}
+		if (cnt == MAXQUOTAS)
 			continue;
 		sb->s_count++;
 		spin_unlock(&sb_lock);
diff --git a/include/linux/quota.h b/include/linux/quota.h
index dcddfb20094..6f1d97ddf82 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -224,8 +224,6 @@ struct super_block;
 
 extern void mark_info_dirty(struct super_block *sb, int type);
 #define info_dirty(info) test_bit(DQF_INFO_DIRTY_B, &(info)->dqi_flags)
-#define info_any_dquot_dirty(info) (!list_empty(&(info)->dqi_dirty_list))
-#define info_any_dirty(info) (info_dirty(info) || info_any_dquot_dirty(info))
 
 #define sb_dqopt(sb) (&(sb)->s_dquot)
 #define sb_dqinfo(sb, type) (sb_dqopt(sb)->info+(type))
-- 
cgit v1.2.3


From 74abb9890dafb12a50dc140de215ed477beb1b88 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:51 -0700
Subject: quota: move function-macros from quota.h to quotaops.h

Move declarations of some macros, which should be in fact functions to
quotaops.h.  This way they can be later converted to inline functions
because we can now use declarations from quota.h.  Also add necessary
includes of quotaops.h to a few files.

[akpm@linux-foundation.org: fix JFS build]
[akpm@linux-foundation.org: fix UFS build]
[vegard.nossum@gmail.com: fix QUOTA=n build]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Arjen Pool <arjenpool@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext2/super.c          |  1 +
 fs/jfs/super.c           |  1 +
 fs/quota_v1.c            |  1 +
 fs/quota_v2.c            |  1 +
 fs/reiserfs/super.c      |  1 +
 fs/ufs/super.c           |  1 +
 include/linux/quota.h    | 22 +++-------------------
 include/linux/quotaops.h | 26 ++++++++++++++++++++++++++
 8 files changed, 35 insertions(+), 19 deletions(-)

diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index ef50cbc792d..31308a3b0b8 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -31,6 +31,7 @@
 #include <linux/seq_file.h>
 #include <linux/mount.h>
 #include <linux/log2.h>
+#include <linux/quotaops.h>
 #include <asm/uaccess.h>
 #include "ext2.h"
 #include "xattr.h"
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 0288e6d7936..359c091d896 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -22,6 +22,7 @@
 #include <linux/parser.h>
 #include <linux/completion.h>
 #include <linux/vfs.h>
+#include <linux/quotaops.h>
 #include <linux/mount.h>
 #include <linux/moduleparam.h>
 #include <linux/kthread.h>
diff --git a/fs/quota_v1.c b/fs/quota_v1.c
index a6cf9269105..5ae15b13eeb 100644
--- a/fs/quota_v1.c
+++ b/fs/quota_v1.c
@@ -1,6 +1,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/quota.h>
+#include <linux/quotaops.h>
 #include <linux/dqblk_v1.h>
 #include <linux/quotaio_v1.h>
 #include <linux/kernel.h>
diff --git a/fs/quota_v2.c b/fs/quota_v2.c
index 234ada90363..b53827dc02d 100644
--- a/fs/quota_v2.c
+++ b/fs/quota_v2.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/quotaops.h>
 
 #include <asm/byteorder.h>
 
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index a10a6d2a887..2ec748ba0bd 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -22,6 +22,7 @@
 #include <linux/blkdev.h>
 #include <linux/buffer_head.h>
 #include <linux/exportfs.h>
+#include <linux/quotaops.h>
 #include <linux/vfs.h>
 #include <linux/mnt_namespace.h>
 #include <linux/mount.h>
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 506f724055c..227c9d70004 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -76,6 +76,7 @@
 
 #include <linux/errno.h>
 #include <linux/fs.h>
+#include <linux/quotaops.h>
 #include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/stat.h>
diff --git a/include/linux/quota.h b/include/linux/quota.h
index 6f1d97ddf82..f9983ea0ff8 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -41,9 +41,6 @@
 #define __DQUOT_VERSION__	"dquot_6.5.1"
 #define __DQUOT_NUM_VERSION__	6*10000+5*100+1
 
-typedef __kernel_uid32_t qid_t; /* Type in which we store ids in memory */
-typedef __u64 qsize_t;          /* Type in which we store sizes */
-
 /* Size of blocks in which are counted size limits */
 #define QUOTABLOCK_BITS 10
 #define QUOTABLOCK_SIZE (1 << QUOTABLOCK_BITS)
@@ -172,6 +169,9 @@ enum {
 
 #include <asm/atomic.h>
 
+typedef __kernel_uid32_t qid_t; /* Type in which we store ids in memory */
+typedef __u64 qsize_t;          /* Type in which we store sizes */
+
 extern spinlock_t dq_data_lock;
 
 /* Maximal numbers of writes for quota operation (insert/delete/update)
@@ -225,9 +225,6 @@ struct super_block;
 extern void mark_info_dirty(struct super_block *sb, int type);
 #define info_dirty(info) test_bit(DQF_INFO_DIRTY_B, &(info)->dqi_flags)
 
-#define sb_dqopt(sb) (&(sb)->s_dquot)
-#define sb_dqinfo(sb, type) (sb_dqopt(sb)->info+(type))
-
 struct dqstats {
 	int lookups;
 	int drops;
@@ -335,19 +332,6 @@ struct quota_info {
 	struct quota_format_ops *ops[MAXQUOTAS];	/* Operations for each type */
 };
 
-#define sb_has_quota_enabled(sb, type) ((type)==USRQUOTA ? \
-	(sb_dqopt(sb)->flags & DQUOT_USR_ENABLED) : (sb_dqopt(sb)->flags & DQUOT_GRP_ENABLED))
-
-#define sb_any_quota_enabled(sb) (sb_has_quota_enabled(sb, USRQUOTA) | \
-				  sb_has_quota_enabled(sb, GRPQUOTA))
-
-#define sb_has_quota_suspended(sb, type) \
-	((type) == USRQUOTA ? (sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED) : \
-			      (sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED))
-
-#define sb_any_quota_suspended(sb) (sb_has_quota_suspended(sb, USRQUOTA) | \
-				  sb_has_quota_suspended(sb, GRPQUOTA))
-
 int register_quota_format(struct quota_format_type *fmt);
 void unregister_quota_format(struct quota_format_type *fmt);
 
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 0c8f9fe462a..38218c1334b 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -14,6 +14,8 @@
 
 #include <linux/fs.h>
 
+#define sb_dqopt(sb) (&(sb)->s_dquot)
+
 #if defined(CONFIG_QUOTA)
 
 /*
@@ -52,6 +54,25 @@ void vfs_dq_drop(struct inode *inode);
 int vfs_dq_transfer(struct inode *inode, struct iattr *iattr);
 int vfs_dq_quota_on_remount(struct super_block *sb);
 
+#define sb_dqinfo(sb, type) (sb_dqopt(sb)->info+(type))
+
+/*
+ * Functions for checking status of quota
+ */
+
+#define sb_has_quota_enabled(sb, type) ((type)==USRQUOTA ? \
+	(sb_dqopt(sb)->flags & DQUOT_USR_ENABLED) : (sb_dqopt(sb)->flags & DQUOT_GRP_ENABLED))
+
+#define sb_any_quota_enabled(sb) (sb_has_quota_enabled(sb, USRQUOTA) | \
+				  sb_has_quota_enabled(sb, GRPQUOTA))
+
+#define sb_has_quota_suspended(sb, type) \
+	((type) == USRQUOTA ? (sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED) : \
+			      (sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED))
+
+#define sb_any_quota_suspended(sb) (sb_has_quota_suspended(sb, USRQUOTA) | \
+				  sb_has_quota_suspended(sb, GRPQUOTA))
+
 /*
  * Operations supported for diskquotas.
  */
@@ -159,6 +180,11 @@ static inline int vfs_dq_off(struct super_block *sb, int remount)
 
 #else
 
+#define sb_has_quota_enabled(sb, type) 0
+#define sb_any_quota_enabled(sb) 0
+#define sb_has_quota_suspended(sb, type) 0
+#define sb_any_quota_suspended(sb) 0
+
 /*
  * NO-OP when quota not configured.
  */
-- 
cgit v1.2.3


From 03b063436ca1076301de58d9d628f610ab5404ad Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:52 -0700
Subject: quota: convert macros to inline functions

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/quota.h    |  5 +++-
 include/linux/quotaops.h | 65 ++++++++++++++++++++++++++++++++++++------------
 2 files changed, 53 insertions(+), 17 deletions(-)

diff --git a/include/linux/quota.h b/include/linux/quota.h
index f9983ea0ff8..4e004fef813 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -223,7 +223,10 @@ struct super_block;
 #define DQF_INFO_DIRTY (1 << DQF_INFO_DIRTY_B)	/* Is info dirty? */
 
 extern void mark_info_dirty(struct super_block *sb, int type);
-#define info_dirty(info) test_bit(DQF_INFO_DIRTY_B, &(info)->dqi_flags)
+static inline int info_dirty(struct mem_dqinfo *info)
+{
+	return test_bit(DQF_INFO_DIRTY_B, &info->dqi_flags);
+}
 
 struct dqstats {
 	int lookups;
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 38218c1334b..742187f7a05 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -11,10 +11,12 @@
 #define _LINUX_QUOTAOPS_
 
 #include <linux/smp_lock.h>
-
 #include <linux/fs.h>
 
-#define sb_dqopt(sb) (&(sb)->s_dquot)
+static inline struct quota_info *sb_dqopt(struct super_block *sb)
+{
+	return &sb->s_dquot;
+}
 
 #if defined(CONFIG_QUOTA)
 
@@ -54,24 +56,40 @@ void vfs_dq_drop(struct inode *inode);
 int vfs_dq_transfer(struct inode *inode, struct iattr *iattr);
 int vfs_dq_quota_on_remount(struct super_block *sb);
 
-#define sb_dqinfo(sb, type) (sb_dqopt(sb)->info+(type))
+static inline struct mem_dqinfo *sb_dqinfo(struct super_block *sb, int type)
+{
+	return sb_dqopt(sb)->info + type;
+}
 
 /*
  * Functions for checking status of quota
  */
 
-#define sb_has_quota_enabled(sb, type) ((type)==USRQUOTA ? \
-	(sb_dqopt(sb)->flags & DQUOT_USR_ENABLED) : (sb_dqopt(sb)->flags & DQUOT_GRP_ENABLED))
+static inline int sb_has_quota_enabled(struct super_block *sb, int type)
+{
+	if (type == USRQUOTA)
+		return sb_dqopt(sb)->flags & DQUOT_USR_ENABLED;
+	return sb_dqopt(sb)->flags & DQUOT_GRP_ENABLED;
+}
 
-#define sb_any_quota_enabled(sb) (sb_has_quota_enabled(sb, USRQUOTA) | \
-				  sb_has_quota_enabled(sb, GRPQUOTA))
+static inline int sb_any_quota_enabled(struct super_block *sb)
+{
+	return sb_has_quota_enabled(sb, USRQUOTA) ||
+		sb_has_quota_enabled(sb, GRPQUOTA);
+}
 
-#define sb_has_quota_suspended(sb, type) \
-	((type) == USRQUOTA ? (sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED) : \
-			      (sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED))
+static inline int sb_has_quota_suspended(struct super_block *sb, int type)
+{
+	if (type == USRQUOTA)
+		return sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED;
+	return sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED;
+}
 
-#define sb_any_quota_suspended(sb) (sb_has_quota_suspended(sb, USRQUOTA) | \
-				  sb_has_quota_suspended(sb, GRPQUOTA))
+static inline int sb_any_quota_suspended(struct super_block *sb)
+{
+	return sb_has_quota_suspended(sb, USRQUOTA) ||
+		sb_has_quota_suspended(sb, GRPQUOTA);
+}
 
 /*
  * Operations supported for diskquotas.
@@ -180,10 +198,25 @@ static inline int vfs_dq_off(struct super_block *sb, int remount)
 
 #else
 
-#define sb_has_quota_enabled(sb, type) 0
-#define sb_any_quota_enabled(sb) 0
-#define sb_has_quota_suspended(sb, type) 0
-#define sb_any_quota_suspended(sb) 0
+static inline int sb_has_quota_enabled(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline int sb_any_quota_enabled(struct super_block *sb)
+{
+	return 0;
+}
+
+static inline int sb_has_quota_suspended(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline int sb_any_quota_suspended(struct super_block *sb)
+{
+	return 0;
+}
 
 /*
  * NO-OP when quota not configured.
-- 
cgit v1.2.3


From 657d3bfa98e542271b449f8cd84c7501ae2b2255 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Fri, 25 Jul 2008 01:46:52 -0700
Subject: quota: implement sending information via netlink about user below
 quota

Sometimes it may be useful for userspace to know (e.g.  for some hosting
guys) that some user stopped exceeding his hardlimit or softlimit in
quotas.  Implement sending of such events to userspace via quota netlink
protocol so that they don't have to poll for such events.  Based on idea
and initial implementation by Vladislav Bogdanov.

Cc: Vladislav Bogdanov <slava@nsys.by>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/dquot.c            | 60 +++++++++++++++++++++++++++++++++++++++++++++------
 include/linux/quota.h |  4 ++++
 2 files changed, 58 insertions(+), 6 deletions(-)

diff --git a/fs/dquot.c b/fs/dquot.c
index 0bcaf970bbb..1346eebe74c 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -889,7 +889,10 @@ static void print_warning(struct dquot *dquot, const int warntype)
 	char *msg = NULL;
 	struct tty_struct *tty;
 
-	if (!need_print_warning(dquot))
+	if (warntype == QUOTA_NL_IHARDBELOW ||
+	    warntype == QUOTA_NL_ISOFTBELOW ||
+	    warntype == QUOTA_NL_BHARDBELOW ||
+	    warntype == QUOTA_NL_BSOFTBELOW || !need_print_warning(dquot))
 		return;
 
 	mutex_lock(&tty_mutex);
@@ -1097,6 +1100,35 @@ static int check_bdq(struct dquot *dquot, qsize_t space, int prealloc, char *war
 	return QUOTA_OK;
 }
 
+static int info_idq_free(struct dquot *dquot, ulong inodes)
+{
+	if (test_bit(DQ_FAKE_B, &dquot->dq_flags) ||
+	    dquot->dq_dqb.dqb_curinodes <= dquot->dq_dqb.dqb_isoftlimit)
+		return QUOTA_NL_NOWARN;
+
+	if (dquot->dq_dqb.dqb_curinodes - inodes <= dquot->dq_dqb.dqb_isoftlimit)
+		return QUOTA_NL_ISOFTBELOW;
+	if (dquot->dq_dqb.dqb_curinodes >= dquot->dq_dqb.dqb_ihardlimit &&
+	    dquot->dq_dqb.dqb_curinodes - inodes < dquot->dq_dqb.dqb_ihardlimit)
+		return QUOTA_NL_IHARDBELOW;
+	return QUOTA_NL_NOWARN;
+}
+
+static int info_bdq_free(struct dquot *dquot, qsize_t space)
+{
+	if (test_bit(DQ_FAKE_B, &dquot->dq_flags) ||
+	    toqb(dquot->dq_dqb.dqb_curspace) <= dquot->dq_dqb.dqb_bsoftlimit)
+		return QUOTA_NL_NOWARN;
+
+	if (toqb(dquot->dq_dqb.dqb_curspace - space) <=
+	    dquot->dq_dqb.dqb_bsoftlimit)
+		return QUOTA_NL_BSOFTBELOW;
+	if (toqb(dquot->dq_dqb.dqb_curspace) >= dquot->dq_dqb.dqb_bhardlimit &&
+	    toqb(dquot->dq_dqb.dqb_curspace - space) <
+						dquot->dq_dqb.dqb_bhardlimit)
+		return QUOTA_NL_BHARDBELOW;
+	return QUOTA_NL_NOWARN;
+}
 /*
  *	Initialize quota pointers in inode
  *	Transaction must be started at entry
@@ -1284,6 +1316,7 @@ warn_put_all:
 int dquot_free_space(struct inode *inode, qsize_t number)
 {
 	unsigned int cnt;
+	char warntype[MAXQUOTAS];
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
@@ -1292,6 +1325,7 @@ out_sub:
 		inode_sub_bytes(inode, number);
 		return QUOTA_OK;
 	}
+
 	down_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	/* Now recheck reliably when holding dqptr_sem */
 	if (IS_NOQUOTA(inode)) {
@@ -1302,6 +1336,7 @@ out_sub:
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (inode->i_dquot[cnt] == NODQUOT)
 			continue;
+		warntype[cnt] = info_bdq_free(inode->i_dquot[cnt], number);
 		dquot_decr_space(inode->i_dquot[cnt], number);
 	}
 	inode_sub_bytes(inode, number);
@@ -1310,6 +1345,7 @@ out_sub:
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
 		if (inode->i_dquot[cnt])
 			mark_dquot_dirty(inode->i_dquot[cnt]);
+	flush_warnings(inode->i_dquot, warntype);
 	up_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	return QUOTA_OK;
 }
@@ -1320,11 +1356,13 @@ out_sub:
 int dquot_free_inode(const struct inode *inode, unsigned long number)
 {
 	unsigned int cnt;
+	char warntype[MAXQUOTAS];
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
 	if (IS_NOQUOTA(inode))
 		return QUOTA_OK;
+
 	down_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	/* Now recheck reliably when holding dqptr_sem */
 	if (IS_NOQUOTA(inode)) {
@@ -1335,6 +1373,7 @@ int dquot_free_inode(const struct inode *inode, unsigned long number)
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (inode->i_dquot[cnt] == NODQUOT)
 			continue;
+		warntype[cnt] = info_idq_free(inode->i_dquot[cnt], number);
 		dquot_decr_inodes(inode->i_dquot[cnt], number);
 	}
 	spin_unlock(&dq_data_lock);
@@ -1342,6 +1381,7 @@ int dquot_free_inode(const struct inode *inode, unsigned long number)
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
 		if (inode->i_dquot[cnt])
 			mark_dquot_dirty(inode->i_dquot[cnt]);
+	flush_warnings(inode->i_dquot, warntype);
 	up_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	return QUOTA_OK;
 }
@@ -1359,7 +1399,8 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 	struct dquot *transfer_to[MAXQUOTAS];
 	int cnt, ret = NO_QUOTA, chuid = (iattr->ia_valid & ATTR_UID) && inode->i_uid != iattr->ia_uid,
 	    chgid = (iattr->ia_valid & ATTR_GID) && inode->i_gid != iattr->ia_gid;
-	char warntype[MAXQUOTAS];
+	char warntype_to[MAXQUOTAS];
+	char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS];
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
@@ -1368,7 +1409,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 	/* Clear the arrays */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		transfer_to[cnt] = transfer_from[cnt] = NODQUOT;
-		warntype[cnt] = QUOTA_NL_NOWARN;
+		warntype_to[cnt] = QUOTA_NL_NOWARN;
 	}
 	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	/* Now recheck reliably when holding dqptr_sem */
@@ -1400,8 +1441,9 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 		if (transfer_to[cnt] == NODQUOT)
 			continue;
 		transfer_from[cnt] = inode->i_dquot[cnt];
-		if (check_idq(transfer_to[cnt], 1, warntype+cnt) == NO_QUOTA ||
-		    check_bdq(transfer_to[cnt], space, 0, warntype+cnt) == NO_QUOTA)
+		if (check_idq(transfer_to[cnt], 1, warntype_to + cnt) ==
+		    NO_QUOTA || check_bdq(transfer_to[cnt], space, 0,
+		    warntype_to + cnt) == NO_QUOTA)
 			goto warn_put_all;
 	}
 
@@ -1417,6 +1459,10 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 
 		/* Due to IO error we might not have transfer_from[] structure */
 		if (transfer_from[cnt]) {
+			warntype_from_inodes[cnt] =
+				info_idq_free(transfer_from[cnt], 1);
+			warntype_from_space[cnt] =
+				info_bdq_free(transfer_from[cnt], space);
 			dquot_decr_inodes(transfer_from[cnt], 1);
 			dquot_decr_space(transfer_from[cnt], space);
 		}
@@ -1436,7 +1482,9 @@ warn_put_all:
 		if (transfer_to[cnt])
 			mark_dquot_dirty(transfer_to[cnt]);
 	}
-	flush_warnings(transfer_to, warntype);
+	flush_warnings(transfer_to, warntype_to);
+	flush_warnings(transfer_from, warntype_from_inodes);
+	flush_warnings(transfer_from, warntype_from_space);
 	
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (ret == QUOTA_OK && transfer_from[cnt] != NODQUOT)
diff --git a/include/linux/quota.h b/include/linux/quota.h
index 4e004fef813..376a05048bc 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -135,6 +135,10 @@ struct if_dqinfo {
 #define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
 #define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
 #define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
+#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
+#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
+#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
+#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
 
 enum {
 	QUOTA_NL_C_UNSPEC,
-- 
cgit v1.2.3


From 9d96d82da437ed5f2053821779ed5d7797ed1f81 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Fri, 25 Jul 2008 01:46:53 -0700
Subject: procfs-guide: drop pointless &nbsp; entities

Having trailing &nbsp; entities in a revision numer seems pretty pointless
to me.  More so, it's causing me pains, so just drop them since no other
guide is doing this.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/DocBook/procfs-guide.tmpl | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/DocBook/procfs-guide.tmpl b/Documentation/DocBook/procfs-guide.tmpl
index 1fd6a1ec759..8a5dc6e021f 100644
--- a/Documentation/DocBook/procfs-guide.tmpl
+++ b/Documentation/DocBook/procfs-guide.tmpl
@@ -29,12 +29,12 @@
 
     <revhistory>
       <revision>
-	<revnumber>1.0&nbsp;</revnumber>
+	<revnumber>1.0</revnumber>
 	<date>May 30, 2001</date>
 	<revremark>Initial revision posted to linux-kernel</revremark>
       </revision>
       <revision>
-	<revnumber>1.1&nbsp;</revnumber>
+	<revnumber>1.1</revnumber>
 	<date>June 3, 2001</date>
 	<revremark>Revised after comments from linux-kernel</revremark>
       </revision>
-- 
cgit v1.2.3


From 7e9abd89cbdf9b73d327d8173343abce9022609b Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:46:54 -0700
Subject: cgroup: use read lock to guard find_existing_css_set()

The function does not modify anything (except the temporary css template), so
it's sufficient to hold read lock.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cgroup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 15ac0e1e4f4..f50edadfdd8 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -415,11 +415,11 @@ static struct css_set *find_css_set(
 
 	/* First see if we already have a cgroup group that matches
 	 * the desired set */
-	write_lock(&css_set_lock);
+	read_lock(&css_set_lock);
 	res = find_existing_css_set(oldcg, cgrp, template);
 	if (res)
 		get_css_set(res);
-	write_unlock(&css_set_lock);
+	read_unlock(&css_set_lock);
 
 	if (res)
 		return res;
-- 
cgit v1.2.3


From f2992db2a4f7ae10f61d5bc68c7c1528cec639e2 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:46:55 -0700
Subject: Mark res_counter_charge(_locked) with __must_check

Ignoring their return values may result in counter underflow in the future -
when the value charged will be uncharged (or in "leaks" - when the value is
not uncharged).

This also prevents from using charging routines to decrement the
counter value (i.e. uncharge it) ;)

(Current code works OK with res_counter, however :) )

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/res_counter.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 6d9e1fca098..125660e7793 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -95,8 +95,10 @@ void res_counter_init(struct res_counter *counter);
  * counter->limit _locked call expects the counter->lock to be taken
  */
 
-int res_counter_charge_locked(struct res_counter *counter, unsigned long val);
-int res_counter_charge(struct res_counter *counter, unsigned long val);
+int __must_check res_counter_charge_locked(struct res_counter *counter,
+		unsigned long val);
+int __must_check res_counter_charge(struct res_counter *counter,
+		unsigned long val);
 
 /*
  * uncharge - tell that some portion of the resource is released
-- 
cgit v1.2.3


From 71cbb949d17d4d776abd547135feb7f3282405c8 Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:46:55 -0700
Subject: cgroup: list_for_each cleanup

--------------------------
while() {
	list_entry();
	...
}
--------------------------

is equivalent to following code.

--------------------------
list_for_each_entry(){
	...
}
--------------------------

later can review easily more.

this patch is just clean up.
it doesn't have any behavor change.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cgroup.c | 44 +++++++++++++++++++++-----------------------
 1 file changed, 21 insertions(+), 23 deletions(-)

diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index f50edadfdd8..6836a906363 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -241,17 +241,20 @@ static int use_task_css_set_links;
  */
 static void unlink_css_set(struct css_set *cg)
 {
+	struct cg_cgroup_link *link;
+	struct cg_cgroup_link *saved_link;
+
 	write_lock(&css_set_lock);
 	hlist_del(&cg->hlist);
 	css_set_count--;
-	while (!list_empty(&cg->cg_links)) {
-		struct cg_cgroup_link *link;
-		link = list_entry(cg->cg_links.next,
-				  struct cg_cgroup_link, cg_link_list);
+
+	list_for_each_entry_safe(link, saved_link, &cg->cg_links,
+				 cg_link_list) {
 		list_del(&link->cg_link_list);
 		list_del(&link->cgrp_link_list);
 		kfree(link);
 	}
+
 	write_unlock(&css_set_lock);
 }
 
@@ -363,15 +366,14 @@ static struct css_set *find_existing_css_set(
 static int allocate_cg_links(int count, struct list_head *tmp)
 {
 	struct cg_cgroup_link *link;
+	struct cg_cgroup_link *saved_link;
 	int i;
 	INIT_LIST_HEAD(tmp);
 	for (i = 0; i < count; i++) {
 		link = kmalloc(sizeof(*link), GFP_KERNEL);
 		if (!link) {
-			while (!list_empty(tmp)) {
-				link = list_entry(tmp->next,
-						  struct cg_cgroup_link,
-						  cgrp_link_list);
+			list_for_each_entry_safe(link, saved_link, tmp,
+						 cgrp_link_list) {
 				list_del(&link->cgrp_link_list);
 				kfree(link);
 			}
@@ -384,11 +386,10 @@ static int allocate_cg_links(int count, struct list_head *tmp)
 
 static void free_cg_links(struct list_head *tmp)
 {
-	while (!list_empty(tmp)) {
-		struct cg_cgroup_link *link;
-		link = list_entry(tmp->next,
-				  struct cg_cgroup_link,
-				  cgrp_link_list);
+	struct cg_cgroup_link *link;
+	struct cg_cgroup_link *saved_link;
+
+	list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) {
 		list_del(&link->cgrp_link_list);
 		kfree(link);
 	}
@@ -1093,6 +1094,8 @@ static void cgroup_kill_sb(struct super_block *sb) {
 	struct cgroupfs_root *root = sb->s_fs_info;
 	struct cgroup *cgrp = &root->top_cgroup;
 	int ret;
+	struct cg_cgroup_link *link;
+	struct cg_cgroup_link *saved_link;
 
 	BUG_ON(!root);
 
@@ -1112,10 +1115,9 @@ static void cgroup_kill_sb(struct super_block *sb) {
 	 * root cgroup
 	 */
 	write_lock(&css_set_lock);
-	while (!list_empty(&cgrp->css_sets)) {
-		struct cg_cgroup_link *link;
-		link = list_entry(cgrp->css_sets.next,
-				  struct cg_cgroup_link, cgrp_link_list);
+
+	list_for_each_entry_safe(link, saved_link, &cgrp->css_sets,
+				 cgrp_link_list) {
 		list_del(&link->cg_link_list);
 		list_del(&link->cgrp_link_list);
 		kfree(link);
@@ -1756,15 +1758,11 @@ int cgroup_add_files(struct cgroup *cgrp,
 int cgroup_task_count(const struct cgroup *cgrp)
 {
 	int count = 0;
-	struct list_head *l;
+	struct cg_cgroup_link *link;
 
 	read_lock(&css_set_lock);
-	l = cgrp->css_sets.next;
-	while (l != &cgrp->css_sets) {
-		struct cg_cgroup_link *link =
-			list_entry(l, struct cg_cgroup_link, cgrp_link_list);
+	list_for_each_entry(link, &cgrp->css_sets, cgrp_link_list) {
 		count += atomic_read(&link->cg->ref.refcount);
-		l = l->next;
 	}
 	read_unlock(&css_set_lock);
 	return count;
-- 
cgit v1.2.3


From 8947f9d5b361ce927be6d5c11fed57905b7a4100 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:46:56 -0700
Subject: cgroups: annotate two variables with __read_mostly

- need_forkexit_callback will be read only after system boot.
- use_task_css_set_links will be read only after it's set.

And these 2 variables are checked when a new process is forked.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cgroup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 6836a906363..70d083c6fb6 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -118,7 +118,7 @@ static int root_count;
  * extra work in the fork/exit path if none of the subsystems need to
  * be called.
  */
-static int need_forkexit_callback;
+static int need_forkexit_callback __read_mostly;
 static int need_mm_owner_callback __read_mostly;
 
 /* convenient tests for these bits */
@@ -220,7 +220,7 @@ static struct hlist_head *css_set_hash(struct cgroup_subsys_state *css[])
  * task until after the first call to cgroup_iter_start(). This
  * reduces the fork()/exit() overhead for people who have cgroups
  * compiled into their kernel but not actually in use */
-static int use_task_css_set_links;
+static int use_task_css_set_links __read_mostly;
 
 /* When we create or destroy a css_set, the operation simply
  * takes/releases a reference count on all the cgroups referenced
-- 
cgit v1.2.3


From ce16b49d37e748574f7fabc2726268d542d0aa1a Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Fri, 25 Jul 2008 01:46:57 -0700
Subject: cgroup files: clean up whitespace in struct cftype

This patch removes some extraneous spaces from method declarations in
struct cftype, to fit in with conventional kernel style.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/cgroup.h | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index e155aa78d85..88a734edccb 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -205,48 +205,48 @@ struct cftype {
 	 * subsystem, followed by a period */
 	char name[MAX_CFTYPE_NAME];
 	int private;
-	int (*open) (struct inode *inode, struct file *file);
-	ssize_t (*read) (struct cgroup *cgrp, struct cftype *cft,
-			 struct file *file,
-			 char __user *buf, size_t nbytes, loff_t *ppos);
+	int (*open)(struct inode *inode, struct file *file);
+	ssize_t (*read)(struct cgroup *cgrp, struct cftype *cft,
+			struct file *file,
+			char __user *buf, size_t nbytes, loff_t *ppos);
 	/*
 	 * read_u64() is a shortcut for the common case of returning a
 	 * single integer. Use it in place of read()
 	 */
-	u64 (*read_u64) (struct cgroup *cgrp, struct cftype *cft);
+	u64 (*read_u64)(struct cgroup *cgrp, struct cftype *cft);
 	/*
 	 * read_s64() is a signed version of read_u64()
 	 */
-	s64 (*read_s64) (struct cgroup *cgrp, struct cftype *cft);
+	s64 (*read_s64)(struct cgroup *cgrp, struct cftype *cft);
 	/*
 	 * read_map() is used for defining a map of key/value
 	 * pairs. It should call cb->fill(cb, key, value) for each
 	 * entry. The key/value pairs (and their ordering) should not
 	 * change between reboots.
 	 */
-	int (*read_map) (struct cgroup *cont, struct cftype *cft,
-			 struct cgroup_map_cb *cb);
+	int (*read_map)(struct cgroup *cont, struct cftype *cft,
+			struct cgroup_map_cb *cb);
 	/*
 	 * read_seq_string() is used for outputting a simple sequence
 	 * using seqfile.
 	 */
-	int (*read_seq_string) (struct cgroup *cont, struct cftype *cft,
-			 struct seq_file *m);
+	int (*read_seq_string)(struct cgroup *cont, struct cftype *cft,
+			       struct seq_file *m);
 
-	ssize_t (*write) (struct cgroup *cgrp, struct cftype *cft,
-			  struct file *file,
-			  const char __user *buf, size_t nbytes, loff_t *ppos);
+	ssize_t (*write)(struct cgroup *cgrp, struct cftype *cft,
+			 struct file *file,
+			 const char __user *buf, size_t nbytes, loff_t *ppos);
 
 	/*
 	 * write_u64() is a shortcut for the common case of accepting
 	 * a single integer (as parsed by simple_strtoull) from
 	 * userspace. Use in place of write(); return 0 or error.
 	 */
-	int (*write_u64) (struct cgroup *cgrp, struct cftype *cft, u64 val);
+	int (*write_u64)(struct cgroup *cgrp, struct cftype *cft, u64 val);
 	/*
 	 * write_s64() is a signed version of write_u64()
 	 */
-	int (*write_s64) (struct cgroup *cgrp, struct cftype *cft, s64 val);
+	int (*write_s64)(struct cgroup *cgrp, struct cftype *cft, s64 val);
 
 	/*
 	 * trigger() callback can be used to get some kick from the
@@ -256,7 +256,7 @@ struct cftype {
 	 */
 	int (*trigger)(struct cgroup *cgrp, unsigned int event);
 
-	int (*release) (struct inode *inode, struct file *file);
+	int (*release)(struct inode *inode, struct file *file);
 };
 
 struct cgroup_scanner {
-- 
cgit v1.2.3


From db3b14978abc02041046ed8353f0899cb58ffffc Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Fri, 25 Jul 2008 01:46:58 -0700
Subject: cgroup files: add write_string cgroup control file method

This patch adds a write_string() method for cgroups control files. The
semantics are that a buffer is copied from userspace to kernelspace
and the handler function invoked on that buffer.  The buffer is
guaranteed to be nul-terminated, and no longer than max_write_len
(defaulting to 64 bytes if unspecified). Later patches will convert
existing raw file write handlers in control group subsystems to use
this method.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/cgroup.h | 14 ++++++++++++++
 kernel/cgroup.c        | 35 +++++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)

diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 88a734edccb..f5379455bb5 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -205,6 +205,13 @@ struct cftype {
 	 * subsystem, followed by a period */
 	char name[MAX_CFTYPE_NAME];
 	int private;
+
+	/*
+	 * If non-zero, defines the maximum length of string that can
+	 * be passed to write_string; defaults to 64
+	 */
+	size_t max_write_len;
+
 	int (*open)(struct inode *inode, struct file *file);
 	ssize_t (*read)(struct cgroup *cgrp, struct cftype *cft,
 			struct file *file,
@@ -248,6 +255,13 @@ struct cftype {
 	 */
 	int (*write_s64)(struct cgroup *cgrp, struct cftype *cft, s64 val);
 
+	/*
+	 * write_string() is passed a nul-terminated kernelspace
+	 * buffer of maximum length determined by max_write_len.
+	 * Returns 0 or -ve error code.
+	 */
+	int (*write_string)(struct cgroup *cgrp, struct cftype *cft,
+			    const char *buffer);
 	/*
 	 * trigger() callback can be used to get some kick from the
 	 * userspace, when the actual string written is not important
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 70d083c6fb6..3a99cc2df86 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1363,6 +1363,39 @@ static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft,
 	return retval;
 }
 
+static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft,
+				   struct file *file,
+				   const char __user *userbuf,
+				   size_t nbytes, loff_t *unused_ppos)
+{
+	char local_buffer[64];
+	int retval = 0;
+	size_t max_bytes = cft->max_write_len;
+	char *buffer = local_buffer;
+
+	if (!max_bytes)
+		max_bytes = sizeof(local_buffer) - 1;
+	if (nbytes >= max_bytes)
+		return -E2BIG;
+	/* Allocate a dynamic buffer if we need one */
+	if (nbytes >= sizeof(local_buffer)) {
+		buffer = kmalloc(nbytes + 1, GFP_KERNEL);
+		if (buffer == NULL)
+			return -ENOMEM;
+	}
+	if (nbytes && copy_from_user(buffer, userbuf, nbytes))
+		return -EFAULT;
+
+	buffer[nbytes] = 0;     /* nul-terminate */
+	strstrip(buffer);
+	retval = cft->write_string(cgrp, cft, buffer);
+	if (!retval)
+		retval = nbytes;
+	if (buffer != local_buffer)
+		kfree(buffer);
+	return retval;
+}
+
 static ssize_t cgroup_common_file_write(struct cgroup *cgrp,
 					   struct cftype *cft,
 					   struct file *file,
@@ -1440,6 +1473,8 @@ static ssize_t cgroup_file_write(struct file *file, const char __user *buf,
 		return cft->write(cgrp, cft, file, buf, nbytes, ppos);
 	if (cft->write_u64 || cft->write_s64)
 		return cgroup_write_X64(cgrp, cft, file, buf, nbytes, ppos);
+	if (cft->write_string)
+		return cgroup_write_string(cgrp, cft, file, buf, nbytes, ppos);
 	if (cft->trigger) {
 		int ret = cft->trigger(cgrp, (unsigned int)cft->private);
 		return ret ? ret : nbytes;
-- 
cgit v1.2.3


From e788e066c651b1bbf4a927dc95395c1aa13be436 Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Fri, 25 Jul 2008 01:46:59 -0700
Subject: cgroup files: move the release_agent file to use typed handlers

Adds cgroup_release_agent_write() and cgroup_release_agent_show()
methods to handle writing/reading the path to a cgroup hierarchy's
release agent. As a result, cgroup_common_file_read() is now unnecessary.

As part of the change, a previously-tolerated race in
cgroup_release_agent() is avoided by copying the current
release_agent_path prior to calling call_usermode_helper().

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/cgroup.h |   2 +
 kernel/cgroup.c        | 125 ++++++++++++++++++++++---------------------------
 2 files changed, 59 insertions(+), 68 deletions(-)

diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index f5379455bb5..e78377a91a7 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -295,6 +295,8 @@ int cgroup_add_files(struct cgroup *cgrp,
 
 int cgroup_is_removed(const struct cgroup *cgrp);
 
+int cgroup_lock_live_group(struct cgroup *cgrp);
+
 int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen);
 
 int cgroup_task_count(const struct cgroup *cgrp);
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 3a99cc2df86..0120b5d67a7 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -89,11 +89,7 @@ struct cgroupfs_root {
 	/* Hierarchy-specific flags */
 	unsigned long flags;
 
-	/* The path to use for release notifications. No locking
-	 * between setting and use - so if userspace updates this
-	 * while child cgroups exist, you could miss a
-	 * notification. We ensure that it's always a valid
-	 * NUL-terminated string */
+	/* The path to use for release notifications. */
 	char release_agent_path[PATH_MAX];
 };
 
@@ -1329,6 +1325,45 @@ enum cgroup_filetype {
 	FILE_RELEASE_AGENT,
 };
 
+/**
+ * cgroup_lock_live_group - take cgroup_mutex and check that cgrp is alive.
+ * @cgrp: the cgroup to be checked for liveness
+ *
+ * Returns true (with lock held) on success, or false (with no lock
+ * held) on failure.
+ */
+int cgroup_lock_live_group(struct cgroup *cgrp)
+{
+	mutex_lock(&cgroup_mutex);
+	if (cgroup_is_removed(cgrp)) {
+		mutex_unlock(&cgroup_mutex);
+		return false;
+	}
+	return true;
+}
+
+static int cgroup_release_agent_write(struct cgroup *cgrp, struct cftype *cft,
+				      const char *buffer)
+{
+	BUILD_BUG_ON(sizeof(cgrp->root->release_agent_path) < PATH_MAX);
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+	strcpy(cgrp->root->release_agent_path, buffer);
+	mutex_unlock(&cgroup_mutex);
+	return 0;
+}
+
+static int cgroup_release_agent_show(struct cgroup *cgrp, struct cftype *cft,
+				     struct seq_file *seq)
+{
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+	seq_puts(seq, cgrp->root->release_agent_path);
+	seq_putc(seq, '\n');
+	mutex_unlock(&cgroup_mutex);
+	return 0;
+}
+
 static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft,
 				struct file *file,
 				const char __user *userbuf,
@@ -1443,10 +1478,6 @@ static ssize_t cgroup_common_file_write(struct cgroup *cgrp,
 		else
 			clear_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
 		break;
-	case FILE_RELEASE_AGENT:
-		BUILD_BUG_ON(sizeof(cgrp->root->release_agent_path) < PATH_MAX);
-		strcpy(cgrp->root->release_agent_path, buffer);
-		break;
 	default:
 		retval = -EINVAL;
 		goto out2;
@@ -1506,49 +1537,6 @@ static ssize_t cgroup_read_s64(struct cgroup *cgrp, struct cftype *cft,
 	return simple_read_from_buffer(buf, nbytes, ppos, tmp, len);
 }
 
-static ssize_t cgroup_common_file_read(struct cgroup *cgrp,
-					  struct cftype *cft,
-					  struct file *file,
-					  char __user *buf,
-					  size_t nbytes, loff_t *ppos)
-{
-	enum cgroup_filetype type = cft->private;
-	char *page;
-	ssize_t retval = 0;
-	char *s;
-
-	if (!(page = (char *)__get_free_page(GFP_KERNEL)))
-		return -ENOMEM;
-
-	s = page;
-
-	switch (type) {
-	case FILE_RELEASE_AGENT:
-	{
-		struct cgroupfs_root *root;
-		size_t n;
-		mutex_lock(&cgroup_mutex);
-		root = cgrp->root;
-		n = strnlen(root->release_agent_path,
-			    sizeof(root->release_agent_path));
-		n = min(n, (size_t) PAGE_SIZE);
-		strncpy(s, root->release_agent_path, n);
-		mutex_unlock(&cgroup_mutex);
-		s += n;
-		break;
-	}
-	default:
-		retval = -EINVAL;
-		goto out;
-	}
-	*s++ = '\n';
-
-	retval = simple_read_from_buffer(buf, nbytes, ppos, page, s - page);
-out:
-	free_page((unsigned long)page);
-	return retval;
-}
-
 static ssize_t cgroup_file_read(struct file *file, char __user *buf,
 				   size_t nbytes, loff_t *ppos)
 {
@@ -1606,6 +1594,7 @@ int cgroup_seqfile_release(struct inode *inode, struct file *file)
 
 static struct file_operations cgroup_seqfile_operations = {
 	.read = seq_read,
+	.write = cgroup_file_write,
 	.llseek = seq_lseek,
 	.release = cgroup_seqfile_release,
 };
@@ -2283,8 +2272,9 @@ static struct cftype files[] = {
 
 static struct cftype cft_release_agent = {
 	.name = "release_agent",
-	.read = cgroup_common_file_read,
-	.write = cgroup_common_file_write,
+	.read_seq_string = cgroup_release_agent_show,
+	.write_string = cgroup_release_agent_write,
+	.max_write_len = PATH_MAX,
 	.private = FILE_RELEASE_AGENT,
 };
 
@@ -3111,27 +3101,24 @@ static void cgroup_release_agent(struct work_struct *work)
 	while (!list_empty(&release_list)) {
 		char *argv[3], *envp[3];
 		int i;
-		char *pathbuf;
+		char *pathbuf = NULL, *agentbuf = NULL;
 		struct cgroup *cgrp = list_entry(release_list.next,
 						    struct cgroup,
 						    release_list);
 		list_del_init(&cgrp->release_list);
 		spin_unlock(&release_list_lock);
 		pathbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-		if (!pathbuf) {
-			spin_lock(&release_list_lock);
-			continue;
-		}
-
-		if (cgroup_path(cgrp, pathbuf, PAGE_SIZE) < 0) {
-			kfree(pathbuf);
-			spin_lock(&release_list_lock);
-			continue;
-		}
+		if (!pathbuf)
+			goto continue_free;
+		if (cgroup_path(cgrp, pathbuf, PAGE_SIZE) < 0)
+			goto continue_free;
+		agentbuf = kstrdup(cgrp->root->release_agent_path, GFP_KERNEL);
+		if (!agentbuf)
+			goto continue_free;
 
 		i = 0;
-		argv[i++] = cgrp->root->release_agent_path;
-		argv[i++] = (char *)pathbuf;
+		argv[i++] = agentbuf;
+		argv[i++] = pathbuf;
 		argv[i] = NULL;
 
 		i = 0;
@@ -3145,8 +3132,10 @@ static void cgroup_release_agent(struct work_struct *work)
 		 * be a slow process */
 		mutex_unlock(&cgroup_mutex);
 		call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
-		kfree(pathbuf);
 		mutex_lock(&cgroup_mutex);
+ continue_free:
+		kfree(pathbuf);
+		kfree(agentbuf);
 		spin_lock(&release_list_lock);
 	}
 	spin_unlock(&release_list_lock);
-- 
cgit v1.2.3


From 84eea842886ac35020be6043e04748ed22014359 Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Fri, 25 Jul 2008 01:47:00 -0700
Subject: cgroups: misc cleanups to write_string patchset

This patch contains cleanups suggested by reviewers for the recent
write_string() patchset:

- pair cgroup_lock_live_group() with cgroup_unlock() in cgroup.c for
  clarity, rather than directly unlocking cgroup_mutex.

- make the return type of cgroup_lock_live_group() a bool

- use a #define'd constant for the local buffer size in read/write functions

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/cgroup.h |  4 ++--
 kernel/cgroup.c        | 21 ++++++++++++---------
 2 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index e78377a91a7..cc59d3a21d8 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -21,11 +21,13 @@
 struct cgroupfs_root;
 struct cgroup_subsys;
 struct inode;
+struct cgroup;
 
 extern int cgroup_init_early(void);
 extern int cgroup_init(void);
 extern void cgroup_init_smp(void);
 extern void cgroup_lock(void);
+extern bool cgroup_lock_live_group(struct cgroup *cgrp);
 extern void cgroup_unlock(void);
 extern void cgroup_fork(struct task_struct *p);
 extern void cgroup_fork_callbacks(struct task_struct *p);
@@ -295,8 +297,6 @@ int cgroup_add_files(struct cgroup *cgrp,
 
 int cgroup_is_removed(const struct cgroup *cgrp);
 
-int cgroup_lock_live_group(struct cgroup *cgrp);
-
 int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen);
 
 int cgroup_task_count(const struct cgroup *cgrp);
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 0120b5d67a7..a14122ecaa5 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1329,10 +1329,10 @@ enum cgroup_filetype {
  * cgroup_lock_live_group - take cgroup_mutex and check that cgrp is alive.
  * @cgrp: the cgroup to be checked for liveness
  *
- * Returns true (with lock held) on success, or false (with no lock
- * held) on failure.
+ * On success, returns true; the lock should be later released with
+ * cgroup_unlock(). On failure returns false with no lock held.
  */
-int cgroup_lock_live_group(struct cgroup *cgrp)
+bool cgroup_lock_live_group(struct cgroup *cgrp)
 {
 	mutex_lock(&cgroup_mutex);
 	if (cgroup_is_removed(cgrp)) {
@@ -1349,7 +1349,7 @@ static int cgroup_release_agent_write(struct cgroup *cgrp, struct cftype *cft,
 	if (!cgroup_lock_live_group(cgrp))
 		return -ENODEV;
 	strcpy(cgrp->root->release_agent_path, buffer);
-	mutex_unlock(&cgroup_mutex);
+	cgroup_unlock();
 	return 0;
 }
 
@@ -1360,16 +1360,19 @@ static int cgroup_release_agent_show(struct cgroup *cgrp, struct cftype *cft,
 		return -ENODEV;
 	seq_puts(seq, cgrp->root->release_agent_path);
 	seq_putc(seq, '\n');
-	mutex_unlock(&cgroup_mutex);
+	cgroup_unlock();
 	return 0;
 }
 
+/* A buffer size big enough for numbers or short strings */
+#define CGROUP_LOCAL_BUFFER_SIZE 64
+
 static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft,
 				struct file *file,
 				const char __user *userbuf,
 				size_t nbytes, loff_t *unused_ppos)
 {
-	char buffer[64];
+	char buffer[CGROUP_LOCAL_BUFFER_SIZE];
 	int retval = 0;
 	char *end;
 
@@ -1403,7 +1406,7 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft,
 				   const char __user *userbuf,
 				   size_t nbytes, loff_t *unused_ppos)
 {
-	char local_buffer[64];
+	char local_buffer[CGROUP_LOCAL_BUFFER_SIZE];
 	int retval = 0;
 	size_t max_bytes = cft->max_write_len;
 	char *buffer = local_buffer;
@@ -1518,7 +1521,7 @@ static ssize_t cgroup_read_u64(struct cgroup *cgrp, struct cftype *cft,
 			       char __user *buf, size_t nbytes,
 			       loff_t *ppos)
 {
-	char tmp[64];
+	char tmp[CGROUP_LOCAL_BUFFER_SIZE];
 	u64 val = cft->read_u64(cgrp, cft);
 	int len = sprintf(tmp, "%llu\n", (unsigned long long) val);
 
@@ -1530,7 +1533,7 @@ static ssize_t cgroup_read_s64(struct cgroup *cgrp, struct cftype *cft,
 			       char __user *buf, size_t nbytes,
 			       loff_t *ppos)
 {
-	char tmp[64];
+	char tmp[CGROUP_LOCAL_BUFFER_SIZE];
 	s64 val = cft->read_s64(cgrp, cft);
 	int len = sprintf(tmp, "%lld\n", (long long) val);
 
-- 
cgit v1.2.3


From 6379c106152388f7ea45d6dda63edda0e9181fc8 Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Fri, 25 Jul 2008 01:47:01 -0700
Subject: cgroup files: move notify_on_release file to separate write handler

This patch moves the write handler for the cgroups notify_on_release
file into a separate handler. This handler requires no cgroups locking
since it relies on atomic bitops for synchronization.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cgroup.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index a14122ecaa5..d597d301578 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1474,13 +1474,6 @@ static ssize_t cgroup_common_file_write(struct cgroup *cgrp,
 	case FILE_TASKLIST:
 		retval = attach_task_by_pid(cgrp, buffer);
 		break;
-	case FILE_NOTIFY_ON_RELEASE:
-		clear_bit(CGRP_RELEASABLE, &cgrp->flags);
-		if (simple_strtoul(buffer, NULL, 10) != 0)
-			set_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
-		else
-			clear_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
-		break;
 	default:
 		retval = -EINVAL;
 		goto out2;
@@ -2252,6 +2245,18 @@ static u64 cgroup_read_notify_on_release(struct cgroup *cgrp,
 	return notify_on_release(cgrp);
 }
 
+static int cgroup_write_notify_on_release(struct cgroup *cgrp,
+					  struct cftype *cft,
+					  u64 val)
+{
+	clear_bit(CGRP_RELEASABLE, &cgrp->flags);
+	if (val)
+		set_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
+	else
+		clear_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
+	return 0;
+}
+
 /*
  * for the common functions, 'private' gives the type of file
  */
@@ -2268,7 +2273,7 @@ static struct cftype files[] = {
 	{
 		.name = "notify_on_release",
 		.read_u64 = cgroup_read_notify_on_release,
-		.write = cgroup_common_file_write,
+		.write_u64 = cgroup_write_notify_on_release,
 		.private = FILE_NOTIFY_ON_RELEASE,
 	},
 };
-- 
cgit v1.2.3


From af351026aafc8da16518a02b41c66d3e0c1cdef4 Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Fri, 25 Jul 2008 01:47:01 -0700
Subject: cgroup files: turn attach_task_by_pid directly into a cgroup write
 handler

This patch changes attach_task_by_pid() to take a u64 rather than a
string; as a result it can be called directly as a control groups
write_u64 handler, and cgroup_common_file_write() can be removed.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cgroup.c | 80 ++++++++++-----------------------------------------------
 1 file changed, 14 insertions(+), 66 deletions(-)

diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index d597d301578..86b71e714e1 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -504,10 +504,6 @@ static struct css_set *find_css_set(
  * knows that the cgroup won't be removed, as cgroup_rmdir()
  * needs that mutex.
  *
- * The cgroup_common_file_write handler for operations that modify
- * the cgroup hierarchy holds cgroup_mutex across the entire operation,
- * single threading all such cgroup modifications across the system.
- *
  * The fork and exit callbacks cgroup_fork() and cgroup_exit(), don't
  * (usually) take cgroup_mutex.  These are the two most performance
  * critical pieces of code here.  The exception occurs on cgroup_exit(),
@@ -1279,18 +1275,14 @@ int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
 }
 
 /*
- * Attach task with pid 'pid' to cgroup 'cgrp'. Call with
- * cgroup_mutex, may take task_lock of task
+ * Attach task with pid 'pid' to cgroup 'cgrp'. Call with cgroup_mutex
+ * held. May take task_lock of task
  */
-static int attach_task_by_pid(struct cgroup *cgrp, char *pidbuf)
+static int attach_task_by_pid(struct cgroup *cgrp, u64 pid)
 {
-	pid_t pid;
 	struct task_struct *tsk;
 	int ret;
 
-	if (sscanf(pidbuf, "%d", &pid) != 1)
-		return -EIO;
-
 	if (pid) {
 		rcu_read_lock();
 		tsk = find_task_by_vpid(pid);
@@ -1316,6 +1308,16 @@ static int attach_task_by_pid(struct cgroup *cgrp, char *pidbuf)
 	return ret;
 }
 
+static int cgroup_tasks_write(struct cgroup *cgrp, struct cftype *cft, u64 pid)
+{
+	int ret;
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+	ret = attach_task_by_pid(cgrp, pid);
+	cgroup_unlock();
+	return ret;
+}
+
 /* The various types of files and directories in a cgroup file system */
 enum cgroup_filetype {
 	FILE_ROOT,
@@ -1434,60 +1436,6 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft,
 	return retval;
 }
 
-static ssize_t cgroup_common_file_write(struct cgroup *cgrp,
-					   struct cftype *cft,
-					   struct file *file,
-					   const char __user *userbuf,
-					   size_t nbytes, loff_t *unused_ppos)
-{
-	enum cgroup_filetype type = cft->private;
-	char *buffer;
-	int retval = 0;
-
-	if (nbytes >= PATH_MAX)
-		return -E2BIG;
-
-	/* +1 for nul-terminator */
-	buffer = kmalloc(nbytes + 1, GFP_KERNEL);
-	if (buffer == NULL)
-		return -ENOMEM;
-
-	if (copy_from_user(buffer, userbuf, nbytes)) {
-		retval = -EFAULT;
-		goto out1;
-	}
-	buffer[nbytes] = 0;	/* nul-terminate */
-	strstrip(buffer);	/* strip -just- trailing whitespace */
-
-	mutex_lock(&cgroup_mutex);
-
-	/*
-	 * This was already checked for in cgroup_file_write(), but
-	 * check again now we're holding cgroup_mutex.
-	 */
-	if (cgroup_is_removed(cgrp)) {
-		retval = -ENODEV;
-		goto out2;
-	}
-
-	switch (type) {
-	case FILE_TASKLIST:
-		retval = attach_task_by_pid(cgrp, buffer);
-		break;
-	default:
-		retval = -EINVAL;
-		goto out2;
-	}
-
-	if (retval == 0)
-		retval = nbytes;
-out2:
-	mutex_unlock(&cgroup_mutex);
-out1:
-	kfree(buffer);
-	return retval;
-}
-
 static ssize_t cgroup_file_write(struct file *file, const char __user *buf,
 						size_t nbytes, loff_t *ppos)
 {
@@ -2265,7 +2213,7 @@ static struct cftype files[] = {
 		.name = "tasks",
 		.open = cgroup_tasks_open,
 		.read = cgroup_tasks_read,
-		.write = cgroup_common_file_write,
+		.write_u64 = cgroup_tasks_write,
 		.release = cgroup_tasks_release,
 		.private = FILE_TASKLIST,
 	},
-- 
cgit v1.2.3


From e37123953292146445c8629b3950d0513fd10ae2 Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Fri, 25 Jul 2008 01:47:02 -0700
Subject: cgroup files: remove cpuset_common_file_write()

This patch tweaks the signatures of the update_cpumask() and
update_nodemask() functions so that they can be called directly as
handlers for the new cgroups write_string() method.

This allows cpuset_common_file_write() to be removed.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cpuset.c | 109 ++++++++++++++++++--------------------------------------
 1 file changed, 35 insertions(+), 74 deletions(-)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index d5738910c34..276ce7e4f1a 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -227,10 +227,6 @@ static struct cpuset top_cpuset = {
  * The task_struct fields mems_allowed and mems_generation may only
  * be accessed in the context of that task, so require no locks.
  *
- * The cpuset_common_file_write handler for operations that modify
- * the cpuset hierarchy holds cgroup_mutex across the entire operation,
- * single threading all such cpuset modifications across the system.
- *
  * The cpuset_common_file_read() handlers only hold callback_mutex across
  * small pieces of code, such as when reading out possibly multi-word
  * cpumasks and nodemasks.
@@ -772,7 +768,7 @@ static void cpuset_change_cpumask(struct task_struct *tsk,
  * @cs: the cpuset to consider
  * @buf: buffer of cpu numbers written to this cpuset
  */
-static int update_cpumask(struct cpuset *cs, char *buf)
+static int update_cpumask(struct cpuset *cs, const char *buf)
 {
 	struct cpuset trialcs;
 	struct cgroup_scanner scan;
@@ -792,7 +788,6 @@ static int update_cpumask(struct cpuset *cs, char *buf)
 	 * that parsing.  The validate_change() call ensures that cpusets
 	 * with tasks have cpus.
 	 */
-	buf = strstrip(buf);
 	if (!*buf) {
 		cpus_clear(trialcs.cpus_allowed);
 	} else {
@@ -902,7 +897,7 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
 
 static void *cpuset_being_rebound;
 
-static int update_nodemask(struct cpuset *cs, char *buf)
+static int update_nodemask(struct cpuset *cs, const char *buf)
 {
 	struct cpuset trialcs;
 	nodemask_t oldmem;
@@ -929,7 +924,6 @@ static int update_nodemask(struct cpuset *cs, char *buf)
 	 * that parsing.  The validate_change() call ensures that cpusets
 	 * with tasks have memory.
 	 */
-	buf = strstrip(buf);
 	if (!*buf) {
 		nodes_clear(trialcs.mems_allowed);
 	} else {
@@ -1256,72 +1250,14 @@ typedef enum {
 	FILE_SPREAD_SLAB,
 } cpuset_filetype_t;
 
-static ssize_t cpuset_common_file_write(struct cgroup *cont,
-					struct cftype *cft,
-					struct file *file,
-					const char __user *userbuf,
-					size_t nbytes, loff_t *unused_ppos)
-{
-	struct cpuset *cs = cgroup_cs(cont);
-	cpuset_filetype_t type = cft->private;
-	char *buffer;
-	int retval = 0;
-
-	/* Crude upper limit on largest legitimate cpulist user might write. */
-	if (nbytes > 100U + 6 * max(NR_CPUS, MAX_NUMNODES))
-		return -E2BIG;
-
-	/* +1 for nul-terminator */
-	buffer = kmalloc(nbytes + 1, GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
-	if (copy_from_user(buffer, userbuf, nbytes)) {
-		retval = -EFAULT;
-		goto out1;
-	}
-	buffer[nbytes] = 0;	/* nul-terminate */
-
-	cgroup_lock();
-
-	if (cgroup_is_removed(cont)) {
-		retval = -ENODEV;
-		goto out2;
-	}
-
-	switch (type) {
-	case FILE_CPULIST:
-		retval = update_cpumask(cs, buffer);
-		break;
-	case FILE_MEMLIST:
-		retval = update_nodemask(cs, buffer);
-		break;
-	default:
-		retval = -EINVAL;
-		goto out2;
-	}
-
-	if (retval == 0)
-		retval = nbytes;
-out2:
-	cgroup_unlock();
-out1:
-	kfree(buffer);
-	return retval;
-}
-
 static int cpuset_write_u64(struct cgroup *cgrp, struct cftype *cft, u64 val)
 {
 	int retval = 0;
 	struct cpuset *cs = cgroup_cs(cgrp);
 	cpuset_filetype_t type = cft->private;
 
-	cgroup_lock();
-
-	if (cgroup_is_removed(cgrp)) {
-		cgroup_unlock();
+	if (!cgroup_lock_live_group(cgrp))
 		return -ENODEV;
-	}
 
 	switch (type) {
 	case FILE_CPU_EXCLUSIVE:
@@ -1367,12 +1303,9 @@ static int cpuset_write_s64(struct cgroup *cgrp, struct cftype *cft, s64 val)
 	struct cpuset *cs = cgroup_cs(cgrp);
 	cpuset_filetype_t type = cft->private;
 
-	cgroup_lock();
-
-	if (cgroup_is_removed(cgrp)) {
-		cgroup_unlock();
+	if (!cgroup_lock_live_group(cgrp))
 		return -ENODEV;
-	}
+
 	switch (type) {
 	case FILE_SCHED_RELAX_DOMAIN_LEVEL:
 		retval = update_relax_domain_level(cs, val);
@@ -1385,6 +1318,32 @@ static int cpuset_write_s64(struct cgroup *cgrp, struct cftype *cft, s64 val)
 	return retval;
 }
 
+/*
+ * Common handling for a write to a "cpus" or "mems" file.
+ */
+static int cpuset_write_resmask(struct cgroup *cgrp, struct cftype *cft,
+				const char *buf)
+{
+	int retval = 0;
+
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+
+	switch (cft->private) {
+	case FILE_CPULIST:
+		retval = update_cpumask(cgroup_cs(cgrp), buf);
+		break;
+	case FILE_MEMLIST:
+		retval = update_nodemask(cgroup_cs(cgrp), buf);
+		break;
+	default:
+		retval = -EINVAL;
+		break;
+	}
+	cgroup_unlock();
+	return retval;
+}
+
 /*
  * These ascii lists should be read in a single call, by using a user
  * buffer large enough to hold the entire map.  If read in smaller
@@ -1504,14 +1463,16 @@ static struct cftype files[] = {
 	{
 		.name = "cpus",
 		.read = cpuset_common_file_read,
-		.write = cpuset_common_file_write,
+		.write_string = cpuset_write_resmask,
+		.max_write_len = (100U + 6 * NR_CPUS),
 		.private = FILE_CPULIST,
 	},
 
 	{
 		.name = "mems",
 		.read = cpuset_common_file_read,
-		.write = cpuset_common_file_write,
+		.write_string = cpuset_write_resmask,
+		.max_write_len = (100U + 6 * MAX_NUMNODES),
 		.private = FILE_MEMLIST,
 	},
 
-- 
cgit v1.2.3


From f92523e3a7861f5dbd76021e0719a35fe8771f2d Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Fri, 25 Jul 2008 01:47:03 -0700
Subject: cgroup files: convert devcgroup_access_write() into a cgroup
 write_string() handler

This patch converts devcgroup_access_write() from a raw file handler
into a handler for the cgroup write_string() method. This allows some
boilerplate copying/locking/checking to be removed and simplifies the
cleanup path, since these functions are performed by the cgroups
framework before calling the handler.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 security/device_cgroup.c | 101 ++++++++++++++++++-----------------------------
 1 file changed, 38 insertions(+), 63 deletions(-)

diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index ddd92cec78e..236fffa9d05 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -59,6 +59,11 @@ static inline struct dev_cgroup *cgroup_to_devcgroup(struct cgroup *cgroup)
 	return css_to_devcgroup(cgroup_subsys_state(cgroup, devices_subsys_id));
 }
 
+static inline struct dev_cgroup *task_devcgroup(struct task_struct *task)
+{
+	return css_to_devcgroup(task_subsys_state(task, devices_subsys_id));
+}
+
 struct cgroup_subsys devices_subsys;
 
 static int devcgroup_can_attach(struct cgroup_subsys *ss,
@@ -312,10 +317,10 @@ static int may_access_whitelist(struct dev_cgroup *c,
  * when adding a new allow rule to a device whitelist, the rule
  * must be allowed in the parent device
  */
-static int parent_has_perm(struct cgroup *childcg,
+static int parent_has_perm(struct dev_cgroup *childcg,
 				  struct dev_whitelist_item *wh)
 {
-	struct cgroup *pcg = childcg->parent;
+	struct cgroup *pcg = childcg->css.cgroup->parent;
 	struct dev_cgroup *parent;
 	int ret;
 
@@ -341,39 +346,18 @@ static int parent_has_perm(struct cgroup *childcg,
  * new access is only allowed if you're in the top-level cgroup, or your
  * parent cgroup has the access you're asking for.
  */
-static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft,
-				struct file *file, const char __user *userbuf,
-				size_t nbytes, loff_t *ppos)
+static int devcgroup_update_access(struct dev_cgroup *devcgroup,
+				   int filetype, const char *buffer)
 {
-	struct cgroup *cur_cgroup;
-	struct dev_cgroup *devcgroup, *cur_devcgroup;
-	int filetype = cft->private;
-	char *buffer, *b;
+	struct dev_cgroup *cur_devcgroup;
+	const char *b;
 	int retval = 0, count;
 	struct dev_whitelist_item wh;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	devcgroup = cgroup_to_devcgroup(cgroup);
-	cur_cgroup = task_cgroup(current, devices_subsys.subsys_id);
-	cur_devcgroup = cgroup_to_devcgroup(cur_cgroup);
-
-	buffer = kmalloc(nbytes+1, GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
-	if (copy_from_user(buffer, userbuf, nbytes)) {
-		retval = -EFAULT;
-		goto out1;
-	}
-	buffer[nbytes] = 0;	/* nul-terminate */
-
-	cgroup_lock();
-	if (cgroup_is_removed(cgroup)) {
-		retval = -ENODEV;
-		goto out2;
-	}
+	cur_devcgroup = task_devcgroup(current);
 
 	memset(&wh, 0, sizeof(wh));
 	b = buffer;
@@ -392,14 +376,11 @@ static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft,
 		wh.type = DEV_CHAR;
 		break;
 	default:
-		retval = -EINVAL;
-		goto out2;
+		return -EINVAL;
 	}
 	b++;
-	if (!isspace(*b)) {
-		retval = -EINVAL;
-		goto out2;
-	}
+	if (!isspace(*b))
+		return -EINVAL;
 	b++;
 	if (*b == '*') {
 		wh.major = ~0;
@@ -411,13 +392,10 @@ static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft,
 			b++;
 		}
 	} else {
-		retval = -EINVAL;
-		goto out2;
-	}
-	if (*b != ':') {
-		retval = -EINVAL;
-		goto out2;
+		return -EINVAL;
 	}
+	if (*b != ':')
+		return -EINVAL;
 	b++;
 
 	/* read minor */
@@ -431,13 +409,10 @@ static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft,
 			b++;
 		}
 	} else {
-		retval = -EINVAL;
-		goto out2;
-	}
-	if (!isspace(*b)) {
-		retval = -EINVAL;
-		goto out2;
+		return -EINVAL;
 	}
+	if (!isspace(*b))
+		return -EINVAL;
 	for (b++, count = 0; count < 3; count++, b++) {
 		switch (*b) {
 		case 'r':
@@ -454,8 +429,7 @@ static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft,
 			count = 3;
 			break;
 		default:
-			retval = -EINVAL;
-			goto out2;
+			return -EINVAL;
 		}
 	}
 
@@ -463,38 +437,39 @@ handle:
 	retval = 0;
 	switch (filetype) {
 	case DEVCG_ALLOW:
-		if (!parent_has_perm(cgroup, &wh))
-			retval = -EPERM;
-		else
-			retval = dev_whitelist_add(devcgroup, &wh);
-		break;
+		if (!parent_has_perm(devcgroup, &wh))
+			return -EPERM;
+		return dev_whitelist_add(devcgroup, &wh);
 	case DEVCG_DENY:
 		dev_whitelist_rm(devcgroup, &wh);
 		break;
 	default:
-		retval = -EINVAL;
-		goto out2;
+		return -EINVAL;
 	}
+	return 0;
+}
 
-	if (retval == 0)
-		retval = nbytes;
-
-out2:
+static int devcgroup_access_write(struct cgroup *cgrp, struct cftype *cft,
+				  const char *buffer)
+{
+	int retval;
+	if (!cgroup_lock_live_group(cgrp))
+		return -ENODEV;
+	retval = devcgroup_update_access(cgroup_to_devcgroup(cgrp),
+					 cft->private, buffer);
 	cgroup_unlock();
-out1:
-	kfree(buffer);
 	return retval;
 }
 
 static struct cftype dev_cgroup_files[] = {
 	{
 		.name = "allow",
-		.write  = devcgroup_access_write,
+		.write_string  = devcgroup_access_write,
 		.private = DEVCG_ALLOW,
 	},
 	{
 		.name = "deny",
-		.write = devcgroup_access_write,
+		.write_string = devcgroup_access_write,
 		.private = DEVCG_DENY,
 	},
 	{
-- 
cgit v1.2.3


From 856c13aa1ff6136c1968414fdea5938ea9d5ebf2 Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Fri, 25 Jul 2008 01:47:04 -0700
Subject: cgroup files: convert res_counter_write() to be a cgroups
 write_string() handler

Currently res_counter_write() is a raw file handler even though it's
ultimately taking a number, since in some cases it wants to
pre-process the string when converting it to a number.

This patch converts res_counter_write() from a raw file handler to a
write_string() handler; this allows some of the boilerplate
copying/locking/checking to be removed, and simplies the cleanup path,
since these functions are now performed by the cgroups framework.

[lizf@cn.fujitsu.com: build fix]
Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/res_counter.h | 11 ++++++++---
 kernel/res_counter.c        | 48 ++++++++++++++++++++-------------------------
 mm/memcontrol.c             | 24 +++++------------------
 3 files changed, 34 insertions(+), 49 deletions(-)

diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 125660e7793..290205dfe09 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -63,9 +63,14 @@ u64 res_counter_read_u64(struct res_counter *counter, int member);
 ssize_t res_counter_read(struct res_counter *counter, int member,
 		const char __user *buf, size_t nbytes, loff_t *pos,
 		int (*read_strategy)(unsigned long long val, char *s));
-ssize_t res_counter_write(struct res_counter *counter, int member,
-		const char __user *buf, size_t nbytes, loff_t *pos,
-		int (*write_strategy)(char *buf, unsigned long long *val));
+
+typedef int (*write_strategy_fn)(const char *buf, unsigned long long *val);
+
+int res_counter_memparse_write_strategy(const char *buf,
+					unsigned long long *res);
+
+int res_counter_write(struct res_counter *counter, int member,
+		      const char *buffer, write_strategy_fn write_strategy);
 
 /*
  * the field descriptors. one for each member of res_counter
diff --git a/kernel/res_counter.c b/kernel/res_counter.c
index d3c61b4ebef..f275c8eca77 100644
--- a/kernel/res_counter.c
+++ b/kernel/res_counter.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/res_counter.h>
 #include <linux/uaccess.h>
+#include <linux/mm.h>
 
 void res_counter_init(struct res_counter *counter)
 {
@@ -102,44 +103,37 @@ u64 res_counter_read_u64(struct res_counter *counter, int member)
 	return *res_counter_member(counter, member);
 }
 
-ssize_t res_counter_write(struct res_counter *counter, int member,
-		const char __user *userbuf, size_t nbytes, loff_t *pos,
-		int (*write_strategy)(char *st_buf, unsigned long long *val))
+int res_counter_memparse_write_strategy(const char *buf,
+					unsigned long long *res)
 {
-	int ret;
-	char *buf, *end;
-	unsigned long flags;
-	unsigned long long tmp, *val;
-
-	buf = kmalloc(nbytes + 1, GFP_KERNEL);
-	ret = -ENOMEM;
-	if (buf == NULL)
-		goto out;
+	char *end;
+	/* FIXME - make memparse() take const char* args */
+	*res = memparse((char *)buf, &end);
+	if (*end != '\0')
+		return -EINVAL;
 
-	buf[nbytes] = '\0';
-	ret = -EFAULT;
-	if (copy_from_user(buf, userbuf, nbytes))
-		goto out_free;
+	*res = PAGE_ALIGN(*res);
+	return 0;
+}
 
-	ret = -EINVAL;
+int res_counter_write(struct res_counter *counter, int member,
+		      const char *buf, write_strategy_fn write_strategy)
+{
+	char *end;
+	unsigned long flags;
+	unsigned long long tmp, *val;
 
-	strstrip(buf);
 	if (write_strategy) {
-		if (write_strategy(buf, &tmp)) {
-			goto out_free;
-		}
+		if (write_strategy(buf, &tmp))
+			return -EINVAL;
 	} else {
 		tmp = simple_strtoull(buf, &end, 10);
 		if (*end != '\0')
-			goto out_free;
+			return -EINVAL;
 	}
 	spin_lock_irqsave(&counter->lock, flags);
 	val = res_counter_member(counter, member);
 	*val = tmp;
 	spin_unlock_irqrestore(&counter->lock, flags);
-	ret = nbytes;
-out_free:
-	kfree(buf);
-out:
-	return ret;
+	return 0;
 }
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e46451e1d9b..7385d58fb06 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -838,32 +838,18 @@ out:
 	return ret;
 }
 
-static int mem_cgroup_write_strategy(char *buf, unsigned long long *tmp)
-{
-	*tmp = memparse(buf, &buf);
-	if (*buf != '\0')
-		return -EINVAL;
-
-	/*
-	 * Round up the value to the closest page size
-	 */
-	*tmp = ((*tmp + PAGE_SIZE - 1) >> PAGE_SHIFT) << PAGE_SHIFT;
-	return 0;
-}
-
 static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
 {
 	return res_counter_read_u64(&mem_cgroup_from_cont(cont)->res,
 				    cft->private);
 }
 
-static ssize_t mem_cgroup_write(struct cgroup *cont, struct cftype *cft,
-				struct file *file, const char __user *userbuf,
-				size_t nbytes, loff_t *ppos)
+static int mem_cgroup_write(struct cgroup *cont, struct cftype *cft,
+			    const char *buffer)
 {
 	return res_counter_write(&mem_cgroup_from_cont(cont)->res,
-				cft->private, userbuf, nbytes, ppos,
-				mem_cgroup_write_strategy);
+				 cft->private, buffer,
+				 res_counter_memparse_write_strategy);
 }
 
 static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
@@ -940,7 +926,7 @@ static struct cftype mem_cgroup_files[] = {
 	{
 		.name = "limit_in_bytes",
 		.private = RES_LIMIT,
-		.write = mem_cgroup_write,
+		.write_string = mem_cgroup_write,
 		.read_u64 = mem_cgroup_read,
 	},
 	{
-- 
cgit v1.2.3


From e885dcde75685e09f23cffae1f6d5169c105b8a0 Mon Sep 17 00:00:00 2001
From: "Serge E. Hallyn" <serue@us.ibm.com>
Date: Fri, 25 Jul 2008 01:47:06 -0700
Subject: cgroup_clone: use pid of newly created task for new cgroup

cgroup_clone creates a new cgroup with the pid of the task.  This works
correctly for unshare, but for clone cgroup_clone is called from
copy_namespaces inside copy_process, which happens before the new pid is
created.  As a result, the new cgroup was created with current's pid.
This patch:

	1. Moves the call inside copy_process to after the new pid
	   is created
	2. Passes the struct pid into ns_cgroup_clone (as it is not
	   yet attached to the task)
	3. Passes a name from ns_cgroup_clone() into cgroup_clone()
	   so as to keep cgroup_clone() itself simpler
	4. Uses pid_vnr() to get the process id value, so that the
	   pid used to name the new cgroup is always the pid as it
	   would be known to the task which did the cloning or
	   unsharing.  I think that is the most intuitive thing to
	   do.  This way, task t1 does clone(CLONE_NEWPID) to get
	   t2, which does clone(CLONE_NEWPID) to get t3, then the
	   cgroup for t3 will be named for the pid by which t2 knows
	   t3.

(Thanks to Dan Smith for finding the main bug)

Changelog:
	June 11: Incorporate Paul Menage's feedback:  don't pass
	         NULL to ns_cgroup_clone from unshare, and reduce
		 patch size by using 'nodename' in cgroup_clone.
	June 10: Original version

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Serge Hallyn <serge@us.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Tested-by: Dan Smith <danms@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/cgroup.h  | 3 ++-
 include/linux/nsproxy.h | 7 +++++--
 kernel/cgroup.c         | 7 +++----
 kernel/fork.c           | 6 ++++++
 kernel/ns_cgroup.c      | 8 ++++++--
 kernel/nsproxy.c        | 8 +-------
 6 files changed, 23 insertions(+), 16 deletions(-)

diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index cc59d3a21d8..c98dd7cb707 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -364,7 +364,8 @@ static inline struct cgroup* task_cgroup(struct task_struct *task,
 	return task_subsys_state(task, subsys_id)->cgroup;
 }
 
-int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *ss);
+int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *ss,
+							char *nodename);
 
 /* A cgroup_iter should be treated as an opaque object */
 struct cgroup_iter {
diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h
index 0e66b57631f..c8a768e5964 100644
--- a/include/linux/nsproxy.h
+++ b/include/linux/nsproxy.h
@@ -82,9 +82,12 @@ static inline void get_nsproxy(struct nsproxy *ns)
 }
 
 #ifdef CONFIG_CGROUP_NS
-int ns_cgroup_clone(struct task_struct *tsk);
+int ns_cgroup_clone(struct task_struct *tsk, struct pid *pid);
 #else
-static inline int ns_cgroup_clone(struct task_struct *tsk) { return 0; }
+static inline int ns_cgroup_clone(struct task_struct *tsk, struct pid *pid)
+{
+	return 0;
+}
 #endif
 
 #endif
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 86b71e714e1..66ec9fd21e0 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2848,16 +2848,17 @@ void cgroup_exit(struct task_struct *tsk, int run_callbacks)
  * cgroup_clone - clone the cgroup the given subsystem is attached to
  * @tsk: the task to be moved
  * @subsys: the given subsystem
+ * @nodename: the name for the new cgroup
  *
  * Duplicate the current cgroup in the hierarchy that the given
  * subsystem is attached to, and move this task into the new
  * child.
  */
-int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys)
+int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys,
+							char *nodename)
 {
 	struct dentry *dentry;
 	int ret = 0;
-	char nodename[MAX_CGROUP_TYPE_NAMELEN];
 	struct cgroup *parent, *child;
 	struct inode *inode;
 	struct css_set *cg;
@@ -2882,8 +2883,6 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys)
 	cg = tsk->cgroups;
 	parent = task_cgroup(tsk, subsys->subsys_id);
 
-	snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "%d", tsk->pid);
-
 	/* Pin the hierarchy */
 	atomic_inc(&parent->root->sb->s_active);
 
diff --git a/kernel/fork.c b/kernel/fork.c
index 5a5d6fef341..228f80c9155 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1107,6 +1107,12 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	if (clone_flags & CLONE_THREAD)
 		p->tgid = current->tgid;
 
+	if (current->nsproxy != p->nsproxy) {
+		retval = ns_cgroup_clone(p, pid);
+		if (retval)
+			goto bad_fork_free_pid;
+	}
+
 	p->set_child_tid = (clone_flags & CLONE_CHILD_SETTID) ? child_tidptr : NULL;
 	/*
 	 * Clear TID on mm_release()?
diff --git a/kernel/ns_cgroup.c b/kernel/ns_cgroup.c
index 48d7ed6fc3a..43c2111cd54 100644
--- a/kernel/ns_cgroup.c
+++ b/kernel/ns_cgroup.c
@@ -7,6 +7,7 @@
 #include <linux/module.h>
 #include <linux/cgroup.h>
 #include <linux/fs.h>
+#include <linux/proc_fs.h>
 #include <linux/slab.h>
 #include <linux/nsproxy.h>
 
@@ -24,9 +25,12 @@ static inline struct ns_cgroup *cgroup_to_ns(
 			    struct ns_cgroup, css);
 }
 
-int ns_cgroup_clone(struct task_struct *task)
+int ns_cgroup_clone(struct task_struct *task, struct pid *pid)
 {
-	return cgroup_clone(task, &ns_subsys);
+	char name[PROC_NUMBUF];
+
+	snprintf(name, PROC_NUMBUF, "%d", pid_vnr(pid));
+	return cgroup_clone(task, &ns_subsys, name);
 }
 
 /*
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index adc785146a1..21575fc46d0 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -157,12 +157,6 @@ int copy_namespaces(unsigned long flags, struct task_struct *tsk)
 		goto out;
 	}
 
-	err = ns_cgroup_clone(tsk);
-	if (err) {
-		put_nsproxy(new_ns);
-		goto out;
-	}
-
 	tsk->nsproxy = new_ns;
 
 out:
@@ -209,7 +203,7 @@ int unshare_nsproxy_namespaces(unsigned long unshare_flags,
 		goto out;
 	}
 
-	err = ns_cgroup_clone(current);
+	err = ns_cgroup_clone(current, task_pid(current));
 	if (err)
 		put_nsproxy(*new_nsp);
 
-- 
cgit v1.2.3


From 4efd1a1b2f09a4b746dd9dc057986c6dadcb1317 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:47:07 -0700
Subject: devcgroup: relax white-list protection down to RCU

Currently this list is protected with a simple spinlock, even for reading
from one.  This is OK, but can be better.

Actually I want it to be better very much, since after replacing the
OpenVZ device permissions engine with the cgroup-based one I noticed, that
we set 12 default device permissions for each newly created container (for
/dev/null, full, terminals, ect devices), and people sometimes have up to
20 perms more, so traversing the ~30-40 elements list under a spinlock
doesn't seem very good.

Here's the RCU protection for white-list - dev_whitelist_item-s are added
and removed under the devcg->lock, but are looked up in permissions
checking under the rcu_read_lock.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 security/device_cgroup.c | 35 ++++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)

diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 236fffa9d05..9da3532726f 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -41,6 +41,7 @@ struct dev_whitelist_item {
 	short type;
 	short access;
 	struct list_head list;
+	struct rcu_head rcu;
 };
 
 struct dev_cgroup {
@@ -133,11 +134,19 @@ static int dev_whitelist_add(struct dev_cgroup *dev_cgroup,
 	}
 
 	if (whcopy != NULL)
-		list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
+		list_add_tail_rcu(&whcopy->list, &dev_cgroup->whitelist);
 	spin_unlock(&dev_cgroup->lock);
 	return 0;
 }
 
+static void whitelist_item_free(struct rcu_head *rcu)
+{
+	struct dev_whitelist_item *item;
+
+	item = container_of(rcu, struct dev_whitelist_item, rcu);
+	kfree(item);
+}
+
 /*
  * called under cgroup_lock()
  * since the list is visible to other tasks, we need the spinlock also
@@ -161,8 +170,8 @@ static void dev_whitelist_rm(struct dev_cgroup *dev_cgroup,
 remove:
 		walk->access &= ~wh->access;
 		if (!walk->access) {
-			list_del(&walk->list);
-			kfree(walk);
+			list_del_rcu(&walk->list);
+			call_rcu(&walk->rcu, whitelist_item_free);
 		}
 	}
 	spin_unlock(&dev_cgroup->lock);
@@ -269,15 +278,15 @@ static int devcgroup_seq_read(struct cgroup *cgroup, struct cftype *cft,
 	struct dev_whitelist_item *wh;
 	char maj[MAJMINLEN], min[MAJMINLEN], acc[ACCLEN];
 
-	spin_lock(&devcgroup->lock);
-	list_for_each_entry(wh, &devcgroup->whitelist, list) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(wh, &devcgroup->whitelist, list) {
 		set_access(acc, wh->access);
 		set_majmin(maj, wh->major);
 		set_majmin(min, wh->minor);
 		seq_printf(m, "%c %s:%s %s\n", type_to_char(wh->type),
 			   maj, min, acc);
 	}
-	spin_unlock(&devcgroup->lock);
+	rcu_read_unlock();
 
 	return 0;
 }
@@ -510,8 +519,8 @@ int devcgroup_inode_permission(struct inode *inode, int mask)
 	if (!dev_cgroup)
 		return 0;
 
-	spin_lock(&dev_cgroup->lock);
-	list_for_each_entry(wh, &dev_cgroup->whitelist, list) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
 			goto acc_check;
 		if ((wh->type & DEV_BLOCK) && !S_ISBLK(inode->i_mode))
@@ -527,10 +536,10 @@ acc_check:
 			continue;
 		if ((mask & MAY_READ) && !(wh->access & ACC_READ))
 			continue;
-		spin_unlock(&dev_cgroup->lock);
+		rcu_read_unlock();
 		return 0;
 	}
-	spin_unlock(&dev_cgroup->lock);
+	rcu_read_unlock();
 
 	return -EPERM;
 }
@@ -545,7 +554,7 @@ int devcgroup_inode_mknod(int mode, dev_t dev)
 	if (!dev_cgroup)
 		return 0;
 
-	spin_lock(&dev_cgroup->lock);
+	rcu_read_lock();
 	list_for_each_entry(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
 			goto acc_check;
@@ -560,9 +569,9 @@ int devcgroup_inode_mknod(int mode, dev_t dev)
 acc_check:
 		if (!(wh->access & ACC_MKNOD))
 			continue;
-		spin_unlock(&dev_cgroup->lock);
+		rcu_read_unlock();
 		return 0;
 	}
-	spin_unlock(&dev_cgroup->lock);
+	rcu_read_unlock();
 	return -EPERM;
 }
-- 
cgit v1.2.3


From 7759fc9d10d3559f365cb122d81e0c0a185fe0fe Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:08 -0700
Subject: devcgroup: code cleanup

- clean up set_majmin()
- use simple_strtoul() to parse major/minor

[akpm@linux-foundation.org: fix simple_strtoul() usage]
[kosaki.motohiro@jp.fujitsu.com: fix warnings]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 security/device_cgroup.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 9da3532726f..7bd296cca04 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -202,7 +202,7 @@ static struct cgroup_subsys_state *devcgroup_create(struct cgroup_subsys *ss,
 		}
 		wh->minor = wh->major = ~0;
 		wh->type = DEV_ALL;
-		wh->access = ACC_MKNOD | ACC_READ | ACC_WRITE;
+		wh->access = ACC_MASK;
 		list_add(&wh->list, &dev_cgroup->whitelist);
 	} else {
 		parent_dev_cgroup = cgroup_to_devcgroup(parent_cgroup);
@@ -264,11 +264,10 @@ static char type_to_char(short type)
 
 static void set_majmin(char *str, unsigned m)
 {
-	memset(str, 0, MAJMINLEN);
 	if (m == ~0)
-		sprintf(str, "*");
+		strcpy(str, "*");
 	else
-		snprintf(str, MAJMINLEN, "%u", m);
+		sprintf(str, "%u", m);
 }
 
 static int devcgroup_seq_read(struct cgroup *cgroup, struct cftype *cft,
@@ -360,6 +359,7 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup,
 {
 	struct dev_cgroup *cur_devcgroup;
 	const char *b;
+	char *endp;
 	int retval = 0, count;
 	struct dev_whitelist_item wh;
 
@@ -395,11 +395,8 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup,
 		wh.major = ~0;
 		b++;
 	} else if (isdigit(*b)) {
-		wh.major = 0;
-		while (isdigit(*b)) {
-			wh.major = wh.major*10+(*b-'0');
-			b++;
-		}
+		wh.major = simple_strtoul(b, &endp, 10);
+		b = endp;
 	} else {
 		return -EINVAL;
 	}
@@ -412,11 +409,8 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup,
 		wh.minor = ~0;
 		b++;
 	} else if (isdigit(*b)) {
-		wh.minor = 0;
-		while (isdigit(*b)) {
-			wh.minor = wh.minor*10+(*b-'0');
-			b++;
-		}
+		wh.minor = simple_strtoul(b, &endp, 10);
+		b = endp;
 	} else {
 		return -EINVAL;
 	}
-- 
cgit v1.2.3


From a181b0e888a1d917edcab57cd73ccf7d8e75a46c Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:08 -0700
Subject: memcg: make global var read_mostly

mem_cgroup_subsys and page_cgroup_cache should be read_mostly and
MEM_CGROUP_RECLAIM_RETRIES can be just a fixed number.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 7385d58fb06..c52c045f515 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -35,9 +35,9 @@
 
 #include <asm/uaccess.h>
 
-struct cgroup_subsys mem_cgroup_subsys;
-static const int MEM_CGROUP_RECLAIM_RETRIES = 5;
-static struct kmem_cache *page_cgroup_cache;
+struct cgroup_subsys mem_cgroup_subsys __read_mostly;
+static struct kmem_cache *page_cgroup_cache __read_mostly;
+#define MEM_CGROUP_RECLAIM_RETRIES	5
 
 /*
  * Statistics for memory cgroup.
-- 
cgit v1.2.3


From 508b7be0a5b06b64203512ed9b34191cddc83f56 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:09 -0700
Subject: memcg: avoid unnecessary initialization

* remove over-killing initialization (in fast path)
* makeing the condition for PAGE_CGROUP_FLAG_ACTIVE be more obvious.

Signed-off-by: KAMEAZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index c52c045f515..90ccc132635 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -296,7 +296,7 @@ static void __mem_cgroup_remove_list(struct mem_cgroup_per_zone *mz,
 		MEM_CGROUP_ZSTAT(mz, MEM_CGROUP_ZSTAT_INACTIVE) -= 1;
 
 	mem_cgroup_charge_statistics(pc->mem_cgroup, pc->flags, false);
-	list_del_init(&pc->lru);
+	list_del(&pc->lru);
 }
 
 static void __mem_cgroup_add_list(struct mem_cgroup_per_zone *mz,
@@ -559,7 +559,7 @@ retry:
 	}
 	unlock_page_cgroup(page);
 
-	pc = kmem_cache_zalloc(page_cgroup_cache, gfp_mask);
+	pc = kmem_cache_alloc(page_cgroup_cache, gfp_mask);
 	if (pc == NULL)
 		goto err;
 
@@ -606,9 +606,14 @@ retry:
 	pc->ref_cnt = 1;
 	pc->mem_cgroup = mem;
 	pc->page = page;
-	pc->flags = PAGE_CGROUP_FLAG_ACTIVE;
+	/*
+	 * If a page is accounted as a page cache, insert to inactive list.
+	 * If anon, insert to active list.
+	 */
 	if (ctype == MEM_CGROUP_CHARGE_TYPE_CACHE)
 		pc->flags = PAGE_CGROUP_FLAG_CACHE;
+	else
+		pc->flags = PAGE_CGROUP_FLAG_ACTIVE;
 
 	lock_page_cgroup(page);
 	if (page_get_page_cgroup(page)) {
-- 
cgit v1.2.3


From e8589cc189f96b87348ae83ea4db38eaac624135 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:10 -0700
Subject: memcg: better migration handling

This patch changes page migration under memory controller to use a
different algorithm.  (thanks to Christoph for new idea.)

Before:
 - page_cgroup is migrated from an old page to a new page.
After:
 - a new page is accounted , no reuse of page_cgroup.

Pros:

 - We can avoid compliated lock depndencies and races in migration.

Cons:

 - new param to mem_cgroup_charge_common().

 - mem_cgroup_getref() is added for handling ref_cnt ping-pong.

This version simplifies complicated lock dependency in page migraiton
under memory resource controller.

  new refcnt sequence is following.

a mapped page:
  prepage_migration() ..... +1 to NEW page
  try_to_unmap()      ..... all refs to OLD page is gone.
  move_pages()        ..... +1 to NEW page if page cache.
  remap...            ..... all refs from *map* is added to NEW one.
  end_migration()     ..... -1 to New page.

  page's mapcount + (page_is_cache) refs are added to NEW one.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/memcontrol.h |  11 ++--
 mm/memcontrol.c            | 128 +++++++++++++++++++++++----------------------
 mm/migrate.c               |  22 +++++---
 3 files changed, 86 insertions(+), 75 deletions(-)

diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index e6608776bc9..84ead2aa6f1 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -50,9 +50,10 @@ extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
 #define mm_match_cgroup(mm, cgroup)	\
 	((cgroup) == mem_cgroup_from_task((mm)->owner))
 
-extern int mem_cgroup_prepare_migration(struct page *page);
+extern int
+mem_cgroup_prepare_migration(struct page *page, struct page *newpage);
 extern void mem_cgroup_end_migration(struct page *page);
-extern void mem_cgroup_page_migration(struct page *page, struct page *newpage);
+extern int mem_cgroup_getref(struct page *page);
 
 /*
  * For memory reclaim.
@@ -112,7 +113,8 @@ static inline int task_in_mem_cgroup(struct task_struct *task,
 	return 1;
 }
 
-static inline int mem_cgroup_prepare_migration(struct page *page)
+static inline int
+mem_cgroup_prepare_migration(struct page *page, struct page *newpage)
 {
 	return 0;
 }
@@ -121,8 +123,7 @@ static inline void mem_cgroup_end_migration(struct page *page)
 {
 }
 
-static inline void
-mem_cgroup_page_migration(struct page *page, struct page *newpage)
+static inline void mem_cgroup_getref(struct page *page)
 {
 }
 
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 90ccc132635..da5912b8455 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -524,7 +524,8 @@ unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
  * < 0 if the cgroup is over its limit
  */
 static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
-				gfp_t gfp_mask, enum charge_type ctype)
+				gfp_t gfp_mask, enum charge_type ctype,
+				struct mem_cgroup *memcg)
 {
 	struct mem_cgroup *mem;
 	struct page_cgroup *pc;
@@ -569,16 +570,21 @@ retry:
 	 * thread group leader migrates. It's possible that mm is not
 	 * set, if so charge the init_mm (happens for pagecache usage).
 	 */
-	if (!mm)
-		mm = &init_mm;
+	if (!memcg) {
+		if (!mm)
+			mm = &init_mm;
 
-	rcu_read_lock();
-	mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
-	/*
-	 * For every charge from the cgroup, increment reference count
-	 */
-	css_get(&mem->css);
-	rcu_read_unlock();
+		rcu_read_lock();
+		mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+		/*
+		 * For every charge from the cgroup, increment reference count
+		 */
+		css_get(&mem->css);
+		rcu_read_unlock();
+	} else {
+		mem = memcg;
+		css_get(&memcg->css);
+	}
 
 	while (res_counter_charge(&mem->res, PAGE_SIZE)) {
 		if (!(gfp_mask & __GFP_WAIT))
@@ -648,7 +654,7 @@ err:
 int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
 {
 	return mem_cgroup_charge_common(page, mm, gfp_mask,
-				MEM_CGROUP_CHARGE_TYPE_MAPPED);
+				MEM_CGROUP_CHARGE_TYPE_MAPPED, NULL);
 }
 
 int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
@@ -657,7 +663,22 @@ int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 	if (!mm)
 		mm = &init_mm;
 	return mem_cgroup_charge_common(page, mm, gfp_mask,
-				MEM_CGROUP_CHARGE_TYPE_CACHE);
+				MEM_CGROUP_CHARGE_TYPE_CACHE, NULL);
+}
+
+int mem_cgroup_getref(struct page *page)
+{
+	struct page_cgroup *pc;
+
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+
+	lock_page_cgroup(page);
+	pc = page_get_page_cgroup(page);
+	VM_BUG_ON(!pc);
+	pc->ref_cnt++;
+	unlock_page_cgroup(page);
+	return 0;
 }
 
 /*
@@ -707,65 +728,39 @@ unlock:
 }
 
 /*
- * Returns non-zero if a page (under migration) has valid page_cgroup member.
- * Refcnt of page_cgroup is incremented.
+ * Before starting migration, account against new page.
  */
-int mem_cgroup_prepare_migration(struct page *page)
+int mem_cgroup_prepare_migration(struct page *page, struct page *newpage)
 {
 	struct page_cgroup *pc;
+	struct mem_cgroup *mem = NULL;
+	enum charge_type ctype = MEM_CGROUP_CHARGE_TYPE_MAPPED;
+	int ret = 0;
 
 	if (mem_cgroup_subsys.disabled)
 		return 0;
 
 	lock_page_cgroup(page);
 	pc = page_get_page_cgroup(page);
-	if (pc)
-		pc->ref_cnt++;
+	if (pc) {
+		mem = pc->mem_cgroup;
+		css_get(&mem->css);
+		if (pc->flags & PAGE_CGROUP_FLAG_CACHE)
+			ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
+	}
 	unlock_page_cgroup(page);
-	return pc != NULL;
-}
-
-void mem_cgroup_end_migration(struct page *page)
-{
-	mem_cgroup_uncharge_page(page);
+	if (mem) {
+		ret = mem_cgroup_charge_common(newpage, NULL, GFP_KERNEL,
+			ctype, mem);
+		css_put(&mem->css);
+	}
+	return ret;
 }
 
-/*
- * We know both *page* and *newpage* are now not-on-LRU and PG_locked.
- * And no race with uncharge() routines because page_cgroup for *page*
- * has extra one reference by mem_cgroup_prepare_migration.
- */
-void mem_cgroup_page_migration(struct page *page, struct page *newpage)
+/* remove redundant charge */
+void mem_cgroup_end_migration(struct page *newpage)
 {
-	struct page_cgroup *pc;
-	struct mem_cgroup_per_zone *mz;
-	unsigned long flags;
-
-	lock_page_cgroup(page);
-	pc = page_get_page_cgroup(page);
-	if (!pc) {
-		unlock_page_cgroup(page);
-		return;
-	}
-
-	mz = page_cgroup_zoneinfo(pc);
-	spin_lock_irqsave(&mz->lru_lock, flags);
-	__mem_cgroup_remove_list(mz, pc);
-	spin_unlock_irqrestore(&mz->lru_lock, flags);
-
-	page_assign_page_cgroup(page, NULL);
-	unlock_page_cgroup(page);
-
-	pc->page = newpage;
-	lock_page_cgroup(newpage);
-	page_assign_page_cgroup(newpage, pc);
-
-	mz = page_cgroup_zoneinfo(pc);
-	spin_lock_irqsave(&mz->lru_lock, flags);
-	__mem_cgroup_add_list(mz, pc);
-	spin_unlock_irqrestore(&mz->lru_lock, flags);
-
-	unlock_page_cgroup(newpage);
+	mem_cgroup_uncharge_page(newpage);
 }
 
 /*
@@ -795,12 +790,19 @@ static void mem_cgroup_force_empty_list(struct mem_cgroup *mem,
 		page = pc->page;
 		get_page(page);
 		spin_unlock_irqrestore(&mz->lru_lock, flags);
-		mem_cgroup_uncharge_page(page);
-		put_page(page);
-		if (--count <= 0) {
-			count = FORCE_UNCHARGE_BATCH;
+		/*
+		 * Check if this page is on LRU. !LRU page can be found
+		 * if it's under page migration.
+		 */
+		if (PageLRU(page)) {
+			mem_cgroup_uncharge_page(page);
+			put_page(page);
+			if (--count <= 0) {
+				count = FORCE_UNCHARGE_BATCH;
+				cond_resched();
+			}
+		} else
 			cond_resched();
-		}
 		spin_lock_irqsave(&mz->lru_lock, flags);
 	}
 	spin_unlock_irqrestore(&mz->lru_lock, flags);
diff --git a/mm/migrate.c b/mm/migrate.c
index 376cceba82f..f6d7f8efd1a 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -358,6 +358,10 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 	__inc_zone_page_state(newpage, NR_FILE_PAGES);
 
 	write_unlock_irq(&mapping->tree_lock);
+	if (!PageSwapCache(newpage)) {
+		mem_cgroup_uncharge_page(page);
+		mem_cgroup_getref(newpage);
+	}
 
 	return 0;
 }
@@ -611,7 +615,6 @@ static int move_to_new_page(struct page *newpage, struct page *page)
 		rc = fallback_migrate_page(mapping, newpage, page);
 
 	if (!rc) {
-		mem_cgroup_page_migration(page, newpage);
 		remove_migration_ptes(page, newpage);
 	} else
 		newpage->mapping = NULL;
@@ -641,6 +644,14 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private,
 		/* page was freed from under us. So we are done. */
 		goto move_newpage;
 
+	charge = mem_cgroup_prepare_migration(page, newpage);
+	if (charge == -ENOMEM) {
+		rc = -ENOMEM;
+		goto move_newpage;
+	}
+	/* prepare cgroup just returns 0 or -ENOMEM */
+	BUG_ON(charge);
+
 	rc = -EAGAIN;
 	if (TestSetPageLocked(page)) {
 		if (!force)
@@ -692,19 +703,14 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private,
 		goto rcu_unlock;
 	}
 
-	charge = mem_cgroup_prepare_migration(page);
 	/* Establish migration ptes or remove ptes */
 	try_to_unmap(page, 1);
 
 	if (!page_mapped(page))
 		rc = move_to_new_page(newpage, page);
 
-	if (rc) {
+	if (rc)
 		remove_migration_ptes(page, page);
-		if (charge)
-			mem_cgroup_end_migration(page);
-	} else if (charge)
- 		mem_cgroup_end_migration(newpage);
 rcu_unlock:
 	if (rcu_locked)
 		rcu_read_unlock();
@@ -725,6 +731,8 @@ unlock:
 	}
 
 move_newpage:
+	if (!charge)
+		mem_cgroup_end_migration(newpage);
 	/*
 	 * Move the new page to the LRU. If migration was not successful
 	 * then this will free the page.
-- 
cgit v1.2.3


From 69029cd550284e32de13d6dd2f77b723c8a0e444 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:14 -0700
Subject: memcg: remove refcnt from page_cgroup

memcg: performance improvements

Patch Description
 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed)
 2/5 ... swapcache handling patch
 3/5 ... add helper function for shmem's memory reclaim patch
 4/5 ... optimize by likely/unlikely ppatch
 5/5 ... remove redundunt check patch (shmem handling is fixed.)

Unix bench result.

== 2.6.26-rc2-mm1 + memory resource controller
Execl Throughput                           2915.4 lps   (29.6 secs, 3 samples)
C Compiler Throughput                      1019.3 lpm   (60.0 secs, 3 samples)
Shell Scripts (1 concurrent)               5796.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (8 concurrent)               1097.7 lpm   (60.0 secs, 3 samples)
Shell Scripts (16 concurrent)               565.3 lpm   (60.0 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks    1022128.0 KBps  (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks   544057.0 KBps  (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks    346481.0 KBps  (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks      319325.0 KBps  (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks     148788.0 KBps  (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks       99051.0 KBps  (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks    2058917.0 KBps  (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks   1606109.0 KBps  (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks    854789.0 KBps  (30.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places         126145.2 lpm   (30.0 secs, 3 samples)

                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Execl Throughput                                43.0     2915.4      678.0
File Copy 1024 bufsize 2000 maxblocks         3960.0   346481.0      875.0
File Copy 256 bufsize 500 maxblocks           1655.0    99051.0      598.5
File Copy 4096 bufsize 8000 maxblocks         5800.0   854789.0     1473.8
Shell Scripts (8 concurrent)                     6.0     1097.7     1829.5
                                                                 =========
     FINAL SCORE                                                     991.3

== 2.6.26-rc2-mm1 + this set ==
Execl Throughput                           3012.9 lps   (29.9 secs, 3 samples)
C Compiler Throughput                       981.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (1 concurrent)               5872.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (8 concurrent)               1120.3 lpm   (60.0 secs, 3 samples)
Shell Scripts (16 concurrent)               578.0 lpm   (60.0 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks    1003993.0 KBps  (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks   550452.0 KBps  (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks    347159.0 KBps  (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks      314644.0 KBps  (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks     151852.0 KBps  (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks      101000.0 KBps  (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks    2033256.0 KBps  (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks   1611814.0 KBps  (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks    847979.0 KBps  (30.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places         128148.7 lpm   (30.0 secs, 3 samples)

                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Execl Throughput                                43.0     3012.9      700.7
File Copy 1024 bufsize 2000 maxblocks         3960.0   347159.0      876.7
File Copy 256 bufsize 500 maxblocks           1655.0   101000.0      610.3
File Copy 4096 bufsize 8000 maxblocks         5800.0   847979.0     1462.0
Shell Scripts (8 concurrent)                     6.0     1120.3     1867.2
                                                                 =========
     FINAL SCORE                                                    1004.6

This patch:

Remove refcnt from page_cgroup().

After this,

 * A page is charged only when !page_mapped() && no page_cgroup is assigned.
	* Anon page is newly mapped.
	* File page is added to mapping->tree.

 * A page is uncharged only when
	* Anon page is fully unmapped.
	* File page is removed from LRU.

There is no change in behavior from user's view.

This patch also removes unnecessary calls in rmap.c which was used only for
refcnt mangement.

[akpm@linux-foundation.org: fix warning]
[hugh@veritas.com: fix shmem_unuse_inode charging]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/memcontrol.h |  10 ++---
 mm/filemap.c               |   6 +--
 mm/memcontrol.c            | 109 ++++++++++++++++++++++++++-------------------
 mm/migrate.c               |   3 +-
 mm/rmap.c                  |  14 +-----
 mm/shmem.c                 |  35 ++++++++++-----
 6 files changed, 97 insertions(+), 80 deletions(-)

diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 84ead2aa6f1..b4980b8f048 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -35,6 +35,7 @@ extern int mem_cgroup_charge(struct page *page, struct mm_struct *mm,
 extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 					gfp_t gfp_mask);
 extern void mem_cgroup_uncharge_page(struct page *page);
+extern void mem_cgroup_uncharge_cache_page(struct page *page);
 extern void mem_cgroup_move_lists(struct page *page, bool active);
 extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
 					struct list_head *dst,
@@ -53,7 +54,6 @@ extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
 extern int
 mem_cgroup_prepare_migration(struct page *page, struct page *newpage);
 extern void mem_cgroup_end_migration(struct page *page);
-extern int mem_cgroup_getref(struct page *page);
 
 /*
  * For memory reclaim.
@@ -98,6 +98,10 @@ static inline void mem_cgroup_uncharge_page(struct page *page)
 {
 }
 
+static inline void mem_cgroup_uncharge_cache_page(struct page *page)
+{
+}
+
 static inline void mem_cgroup_move_lists(struct page *page, bool active)
 {
 }
@@ -123,10 +127,6 @@ static inline void mem_cgroup_end_migration(struct page *page)
 {
 }
 
-static inline void mem_cgroup_getref(struct page *page)
-{
-}
-
 static inline int mem_cgroup_calc_mapped_ratio(struct mem_cgroup *mem)
 {
 	return 0;
diff --git a/mm/filemap.c b/mm/filemap.c
index 5d4c880d7cd..2d3ec1ffc66 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -115,7 +115,7 @@ void __remove_from_page_cache(struct page *page)
 {
 	struct address_space *mapping = page->mapping;
 
-	mem_cgroup_uncharge_page(page);
+	mem_cgroup_uncharge_cache_page(page);
 	radix_tree_delete(&mapping->page_tree, page->index);
 	page->mapping = NULL;
 	mapping->nrpages--;
@@ -474,12 +474,12 @@ int add_to_page_cache(struct page *page, struct address_space *mapping,
 			mapping->nrpages++;
 			__inc_zone_page_state(page, NR_FILE_PAGES);
 		} else
-			mem_cgroup_uncharge_page(page);
+			mem_cgroup_uncharge_cache_page(page);
 
 		write_unlock_irq(&mapping->tree_lock);
 		radix_tree_preload_end();
 	} else
-		mem_cgroup_uncharge_page(page);
+		mem_cgroup_uncharge_cache_page(page);
 out:
 	return error;
 }
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index da5912b8455..a61706193c3 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -166,7 +166,6 @@ struct page_cgroup {
 	struct list_head lru;		/* per cgroup LRU list */
 	struct page *page;
 	struct mem_cgroup *mem_cgroup;
-	int ref_cnt;			/* cached, mapped, migrating */
 	int flags;
 };
 #define PAGE_CGROUP_FLAG_CACHE	(0x1)	/* charged as cache */
@@ -185,6 +184,7 @@ static enum zone_type page_cgroup_zid(struct page_cgroup *pc)
 enum charge_type {
 	MEM_CGROUP_CHARGE_TYPE_CACHE = 0,
 	MEM_CGROUP_CHARGE_TYPE_MAPPED,
+	MEM_CGROUP_CHARGE_TYPE_FORCE,	/* used by force_empty */
 };
 
 /*
@@ -552,9 +552,7 @@ retry:
 	 */
 	if (pc) {
 		VM_BUG_ON(pc->page != page);
-		VM_BUG_ON(pc->ref_cnt <= 0);
-
-		pc->ref_cnt++;
+		VM_BUG_ON(!pc->mem_cgroup);
 		unlock_page_cgroup(page);
 		goto done;
 	}
@@ -570,10 +568,7 @@ retry:
 	 * thread group leader migrates. It's possible that mm is not
 	 * set, if so charge the init_mm (happens for pagecache usage).
 	 */
-	if (!memcg) {
-		if (!mm)
-			mm = &init_mm;
-
+	if (likely(!memcg)) {
 		rcu_read_lock();
 		mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
 		/*
@@ -609,7 +604,6 @@ retry:
 		}
 	}
 
-	pc->ref_cnt = 1;
 	pc->mem_cgroup = mem;
 	pc->page = page;
 	/*
@@ -653,6 +647,17 @@ err:
 
 int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
 {
+	/*
+	 * If already mapped, we don't have to account.
+	 * If page cache, page->mapping has address_space.
+	 * But page->mapping may have out-of-use anon_vma pointer,
+	 * detecit it by PageAnon() check. newly-mapped-anon's page->mapping
+	 * is NULL.
+  	 */
+	if (page_mapped(page) || (page->mapping && !PageAnon(page)))
+		return 0;
+	if (unlikely(!mm))
+		mm = &init_mm;
 	return mem_cgroup_charge_common(page, mm, gfp_mask,
 				MEM_CGROUP_CHARGE_TYPE_MAPPED, NULL);
 }
@@ -660,32 +665,17 @@ int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
 int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 				gfp_t gfp_mask)
 {
-	if (!mm)
+	if (unlikely(!mm))
 		mm = &init_mm;
 	return mem_cgroup_charge_common(page, mm, gfp_mask,
 				MEM_CGROUP_CHARGE_TYPE_CACHE, NULL);
 }
 
-int mem_cgroup_getref(struct page *page)
-{
-	struct page_cgroup *pc;
-
-	if (mem_cgroup_subsys.disabled)
-		return 0;
-
-	lock_page_cgroup(page);
-	pc = page_get_page_cgroup(page);
-	VM_BUG_ON(!pc);
-	pc->ref_cnt++;
-	unlock_page_cgroup(page);
-	return 0;
-}
-
 /*
- * Uncharging is always a welcome operation, we never complain, simply
- * uncharge.
+ * uncharge if !page_mapped(page)
  */
-void mem_cgroup_uncharge_page(struct page *page)
+static void
+__mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
 {
 	struct page_cgroup *pc;
 	struct mem_cgroup *mem;
@@ -704,29 +694,41 @@ void mem_cgroup_uncharge_page(struct page *page)
 		goto unlock;
 
 	VM_BUG_ON(pc->page != page);
-	VM_BUG_ON(pc->ref_cnt <= 0);
 
-	if (--(pc->ref_cnt) == 0) {
-		mz = page_cgroup_zoneinfo(pc);
-		spin_lock_irqsave(&mz->lru_lock, flags);
-		__mem_cgroup_remove_list(mz, pc);
-		spin_unlock_irqrestore(&mz->lru_lock, flags);
+	if ((ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
+	    && ((pc->flags & PAGE_CGROUP_FLAG_CACHE)
+		|| page_mapped(page)))
+		goto unlock;
 
-		page_assign_page_cgroup(page, NULL);
-		unlock_page_cgroup(page);
+	mz = page_cgroup_zoneinfo(pc);
+	spin_lock_irqsave(&mz->lru_lock, flags);
+	__mem_cgroup_remove_list(mz, pc);
+	spin_unlock_irqrestore(&mz->lru_lock, flags);
 
-		mem = pc->mem_cgroup;
-		res_counter_uncharge(&mem->res, PAGE_SIZE);
-		css_put(&mem->css);
+	page_assign_page_cgroup(page, NULL);
+	unlock_page_cgroup(page);
 
-		kmem_cache_free(page_cgroup_cache, pc);
-		return;
-	}
+	mem = pc->mem_cgroup;
+	res_counter_uncharge(&mem->res, PAGE_SIZE);
+	css_put(&mem->css);
 
+	kmem_cache_free(page_cgroup_cache, pc);
+	return;
 unlock:
 	unlock_page_cgroup(page);
 }
 
+void mem_cgroup_uncharge_page(struct page *page)
+{
+	__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_MAPPED);
+}
+
+void mem_cgroup_uncharge_cache_page(struct page *page)
+{
+	VM_BUG_ON(page_mapped(page));
+	__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE);
+}
+
 /*
  * Before starting migration, account against new page.
  */
@@ -757,15 +759,29 @@ int mem_cgroup_prepare_migration(struct page *page, struct page *newpage)
 	return ret;
 }
 
-/* remove redundant charge */
+/* remove redundant charge if migration failed*/
 void mem_cgroup_end_migration(struct page *newpage)
 {
-	mem_cgroup_uncharge_page(newpage);
+	/*
+	 * At success, page->mapping is not NULL.
+	 * special rollback care is necessary when
+	 * 1. at migration failure. (newpage->mapping is cleared in this case)
+	 * 2. the newpage was moved but not remapped again because the task
+	 *    exits and the newpage is obsolete. In this case, the new page
+	 *    may be a swapcache. So, we just call mem_cgroup_uncharge_page()
+	 *    always for avoiding mess. The  page_cgroup will be removed if
+	 *    unnecessary. File cache pages is still on radix-tree. Don't
+	 *    care it.
+	 */
+	if (!newpage->mapping)
+		__mem_cgroup_uncharge_common(newpage,
+					 MEM_CGROUP_CHARGE_TYPE_FORCE);
+	else if (PageAnon(newpage))
+		mem_cgroup_uncharge_page(newpage);
 }
 
 /*
  * This routine traverse page_cgroup in given list and drop them all.
- * This routine ignores page_cgroup->ref_cnt.
  * *And* this routine doesn't reclaim page itself, just removes page_cgroup.
  */
 #define FORCE_UNCHARGE_BATCH	(128)
@@ -795,7 +811,8 @@ static void mem_cgroup_force_empty_list(struct mem_cgroup *mem,
 		 * if it's under page migration.
 		 */
 		if (PageLRU(page)) {
-			mem_cgroup_uncharge_page(page);
+			__mem_cgroup_uncharge_common(page,
+					MEM_CGROUP_CHARGE_TYPE_FORCE);
 			put_page(page);
 			if (--count <= 0) {
 				count = FORCE_UNCHARGE_BATCH;
diff --git a/mm/migrate.c b/mm/migrate.c
index f6d7f8efd1a..d8c65a65c61 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -359,8 +359,7 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 
 	write_unlock_irq(&mapping->tree_lock);
 	if (!PageSwapCache(newpage)) {
-		mem_cgroup_uncharge_page(page);
-		mem_cgroup_getref(newpage);
+		mem_cgroup_uncharge_cache_page(page);
 	}
 
 	return 0;
diff --git a/mm/rmap.c b/mm/rmap.c
index bf0a5b7cfb8..abbd29f7c43 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -576,14 +576,8 @@ void page_add_anon_rmap(struct page *page,
 	VM_BUG_ON(address < vma->vm_start || address >= vma->vm_end);
 	if (atomic_inc_and_test(&page->_mapcount))
 		__page_set_anon_rmap(page, vma, address);
-	else {
+	else
 		__page_check_anon_rmap(page, vma, address);
-		/*
-		 * We unconditionally charged during prepare, we uncharge here
-		 * This takes care of balancing the reference counts
-		 */
-		mem_cgroup_uncharge_page(page);
-	}
 }
 
 /**
@@ -614,12 +608,6 @@ void page_add_file_rmap(struct page *page)
 {
 	if (atomic_inc_and_test(&page->_mapcount))
 		__inc_zone_page_state(page, NR_FILE_MAPPED);
-	else
-		/*
-		 * We unconditionally charged during prepare, we uncharge here
-		 * This takes care of balancing the reference counts
-		 */
-		mem_cgroup_uncharge_page(page);
 }
 
 #ifdef CONFIG_DEBUG_VM
diff --git a/mm/shmem.c b/mm/shmem.c
index 9ffbea9b79e..d58305e8a48 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -922,20 +922,26 @@ found:
 	error = 1;
 	if (!inode)
 		goto out;
-	/* Precharge page while we can wait, compensate afterwards */
+	/* Precharge page using GFP_KERNEL while we can wait */
 	error = mem_cgroup_cache_charge(page, current->mm, GFP_KERNEL);
 	if (error)
 		goto out;
 	error = radix_tree_preload(GFP_KERNEL);
-	if (error)
-		goto uncharge;
+	if (error) {
+		mem_cgroup_uncharge_cache_page(page);
+		goto out;
+	}
 	error = 1;
 
 	spin_lock(&info->lock);
 	ptr = shmem_swp_entry(info, idx, NULL);
-	if (ptr && ptr->val == entry.val)
+	if (ptr && ptr->val == entry.val) {
 		error = add_to_page_cache(page, inode->i_mapping,
 						idx, GFP_NOWAIT);
+		/* does mem_cgroup_uncharge_cache_page on error */
+	} else	/* we must compensate for our precharge above */
+		mem_cgroup_uncharge_cache_page(page);
+
 	if (error == -EEXIST) {
 		struct page *filepage = find_get_page(inode->i_mapping, idx);
 		error = 1;
@@ -961,8 +967,6 @@ found:
 		shmem_swp_unmap(ptr);
 	spin_unlock(&info->lock);
 	radix_tree_preload_end();
-uncharge:
-	mem_cgroup_uncharge_page(page);
 out:
 	unlock_page(page);
 	page_cache_release(page);
@@ -1319,7 +1323,7 @@ repeat:
 					page_cache_release(swappage);
 					goto failed;
 				}
-				mem_cgroup_uncharge_page(swappage);
+				mem_cgroup_uncharge_cache_page(swappage);
 			}
 			page_cache_release(swappage);
 			goto repeat;
@@ -1358,6 +1362,8 @@ repeat:
 		}
 
 		if (!filepage) {
+			int ret;
+
 			spin_unlock(&info->lock);
 			filepage = shmem_alloc_page(gfp, info, idx);
 			if (!filepage) {
@@ -1386,10 +1392,18 @@ repeat:
 				swap = *entry;
 				shmem_swp_unmap(entry);
 			}
-			if (error || swap.val || 0 != add_to_page_cache_lru(
-					filepage, mapping, idx, GFP_NOWAIT)) {
+			ret = error || swap.val;
+			if (ret)
+				mem_cgroup_uncharge_cache_page(filepage);
+			else
+				ret = add_to_page_cache_lru(filepage, mapping,
+						idx, GFP_NOWAIT);
+			/*
+			 * At add_to_page_cache_lru() failure, uncharge will
+			 * be done automatically.
+			 */
+			if (ret) {
 				spin_unlock(&info->lock);
-				mem_cgroup_uncharge_page(filepage);
 				page_cache_release(filepage);
 				shmem_unacct_blocks(info->flags, 1);
 				shmem_free_blocks(inode, 1);
@@ -1398,7 +1412,6 @@ repeat:
 					goto failed;
 				goto repeat;
 			}
-			mem_cgroup_uncharge_page(filepage);
 			info->flags |= SHMEM_PAGEIN;
 		}
 
-- 
cgit v1.2.3


From c9b0ed51483cc2fc42bb801b6675c4231b0e4634 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:15 -0700
Subject: memcg: helper function for relcaim from shmem.

A new call, mem_cgroup_shrink_usage() is added for shmem handling and
relacing non-standard usage of mem_cgroup_charge/uncharge.

Now, shmem calls mem_cgroup_charge() just for reclaim some pages from
mem_cgroup.  In general, shmem is used by some process group and not for
global resource (like file caches).  So, it's reasonable to reclaim pages
from mem_cgroup where shmem is mainly used.

[hugh@veritas.com: shmem_getpage release page sooner]
[hugh@veritas.com: mem_cgroup_shrink_usage css_put]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/memcontrol.h |  7 +++++++
 mm/memcontrol.c            | 26 ++++++++++++++++++++++++++
 mm/shmem.c                 | 11 ++++-------
 3 files changed, 37 insertions(+), 7 deletions(-)

diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index b4980b8f048..fdf3967e139 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -37,6 +37,8 @@ extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 extern void mem_cgroup_uncharge_page(struct page *page);
 extern void mem_cgroup_uncharge_cache_page(struct page *page);
 extern void mem_cgroup_move_lists(struct page *page, bool active);
+extern int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask);
+
 extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
 					struct list_head *dst,
 					unsigned long *scanned, int order,
@@ -102,6 +104,11 @@ static inline void mem_cgroup_uncharge_cache_page(struct page *page)
 {
 }
 
+static inline int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
+{
+	return 0;
+}
+
 static inline void mem_cgroup_move_lists(struct page *page, bool active)
 {
 }
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index a61706193c3..f46b8615de6 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -780,6 +780,32 @@ void mem_cgroup_end_migration(struct page *newpage)
 		mem_cgroup_uncharge_page(newpage);
 }
 
+/*
+ * A call to try to shrink memory usage under specified resource controller.
+ * This is typically used for page reclaiming for shmem for reducing side
+ * effect of page allocation from shmem, which is used by some mem_cgroup.
+ */
+int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
+{
+	struct mem_cgroup *mem;
+	int progress = 0;
+	int retry = MEM_CGROUP_RECLAIM_RETRIES;
+
+	rcu_read_lock();
+	mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+	css_get(&mem->css);
+	rcu_read_unlock();
+
+	do {
+		progress = try_to_free_mem_cgroup_pages(mem, gfp_mask);
+	} while (!progress && --retry);
+
+	css_put(&mem->css);
+	if (!retry)
+		return -ENOMEM;
+	return 0;
+}
+
 /*
  * This routine traverse page_cgroup in given list and drop them all.
  * *And* this routine doesn't reclaim page itself, just removes page_cgroup.
diff --git a/mm/shmem.c b/mm/shmem.c
index d58305e8a48..f92fea94d03 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1315,17 +1315,14 @@ repeat:
 			shmem_swp_unmap(entry);
 			spin_unlock(&info->lock);
 			unlock_page(swappage);
+			page_cache_release(swappage);
 			if (error == -ENOMEM) {
 				/* allow reclaim from this memory cgroup */
-				error = mem_cgroup_cache_charge(swappage,
-					current->mm, gfp & ~__GFP_HIGHMEM);
-				if (error) {
-					page_cache_release(swappage);
+				error = mem_cgroup_shrink_usage(current->mm,
+								gfp);
+				if (error)
 					goto failed;
-				}
-				mem_cgroup_uncharge_cache_page(swappage);
 			}
-			page_cache_release(swappage);
 			goto repeat;
 		}
 	} else if (sgp == SGP_READ && !filepage) {
-- 
cgit v1.2.3


From b76734e5e34e1889ab9fc5f3756570b1129f0f50 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:16 -0700
Subject: memcg: add hints for branch

Showing brach direction for obvious conditions.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index f46b8615de6..04ded27f622 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -550,7 +550,7 @@ retry:
 	 * The page_cgroup exists and
 	 * the page has already been accounted.
 	 */
-	if (pc) {
+	if (unlikely(pc)) {
 		VM_BUG_ON(pc->page != page);
 		VM_BUG_ON(!pc->mem_cgroup);
 		unlock_page_cgroup(page);
@@ -559,7 +559,7 @@ retry:
 	unlock_page_cgroup(page);
 
 	pc = kmem_cache_alloc(page_cgroup_cache, gfp_mask);
-	if (pc == NULL)
+	if (unlikely(pc == NULL))
 		goto err;
 
 	/*
@@ -616,7 +616,7 @@ retry:
 		pc->flags = PAGE_CGROUP_FLAG_ACTIVE;
 
 	lock_page_cgroup(page);
-	if (page_get_page_cgroup(page)) {
+	if (unlikely(page_get_page_cgroup(page))) {
 		unlock_page_cgroup(page);
 		/*
 		 * Another charge has been added to this page already.
@@ -690,7 +690,7 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
 	 */
 	lock_page_cgroup(page);
 	pc = page_get_page_cgroup(page);
-	if (!pc)
+	if (unlikely(!pc))
 		goto unlock;
 
 	VM_BUG_ON(pc->page != page);
-- 
cgit v1.2.3


From accf163e6ab729f1fc5fffaa0310e498270bf4e7 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:17 -0700
Subject: memcg: remove a redundant check

Because of remove refcnt patch, it's very rare case to that
mem_cgroup_charge_common() is called against a page which is accounted.

mem_cgroup_charge_common() is called when.
 1. a page is added into file cache.
 2. an anon page is _newly_ mapped.

A racy case is that a newly-swapped-in anonymous page is referred from
prural threads in do_swap_page() at the same time.
(a page is not Locked when mem_cgroup_charge() is called from do_swap_page.)

Another case is shmem. It charges its page before calling add_to_page_cache().
Then, mem_cgroup_charge_cache() is called twice. This case is handled in
mem_cgroup_cache_charge(). But this check may be too hacky...

Signed-off-by : KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 53 +++++++++++++++++++++++++----------------------------
 1 file changed, 25 insertions(+), 28 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 04ded27f622..5b3759bd549 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -536,28 +536,6 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
 	if (mem_cgroup_subsys.disabled)
 		return 0;
 
-	/*
-	 * Should page_cgroup's go to their own slab?
-	 * One could optimize the performance of the charging routine
-	 * by saving a bit in the page_flags and using it as a lock
-	 * to see if the cgroup page already has a page_cgroup associated
-	 * with it
-	 */
-retry:
-	lock_page_cgroup(page);
-	pc = page_get_page_cgroup(page);
-	/*
-	 * The page_cgroup exists and
-	 * the page has already been accounted.
-	 */
-	if (unlikely(pc)) {
-		VM_BUG_ON(pc->page != page);
-		VM_BUG_ON(!pc->mem_cgroup);
-		unlock_page_cgroup(page);
-		goto done;
-	}
-	unlock_page_cgroup(page);
-
 	pc = kmem_cache_alloc(page_cgroup_cache, gfp_mask);
 	if (unlikely(pc == NULL))
 		goto err;
@@ -618,15 +596,10 @@ retry:
 	lock_page_cgroup(page);
 	if (unlikely(page_get_page_cgroup(page))) {
 		unlock_page_cgroup(page);
-		/*
-		 * Another charge has been added to this page already.
-		 * We take lock_page_cgroup(page) again and read
-		 * page->cgroup, increment refcnt.... just retry is OK.
-		 */
 		res_counter_uncharge(&mem->res, PAGE_SIZE);
 		css_put(&mem->css);
 		kmem_cache_free(page_cgroup_cache, pc);
-		goto retry;
+		goto done;
 	}
 	page_assign_page_cgroup(page, pc);
 
@@ -665,8 +638,32 @@ int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
 int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 				gfp_t gfp_mask)
 {
+	/*
+	 * Corner case handling. This is called from add_to_page_cache()
+	 * in usual. But some FS (shmem) precharges this page before calling it
+	 * and call add_to_page_cache() with GFP_NOWAIT.
+	 *
+	 * For GFP_NOWAIT case, the page may be pre-charged before calling
+	 * add_to_page_cache(). (See shmem.c) check it here and avoid to call
+	 * charge twice. (It works but has to pay a bit larger cost.)
+	 */
+	if (!(gfp_mask & __GFP_WAIT)) {
+		struct page_cgroup *pc;
+
+		lock_page_cgroup(page);
+		pc = page_get_page_cgroup(page);
+		if (pc) {
+			VM_BUG_ON(pc->page != page);
+			VM_BUG_ON(!pc->mem_cgroup);
+			unlock_page_cgroup(page);
+			return 0;
+		}
+		unlock_page_cgroup(page);
+	}
+
 	if (unlikely(!mm))
 		mm = &init_mm;
+
 	return mem_cgroup_charge_common(page, mm, gfp_mask,
 				MEM_CGROUP_CHARGE_TYPE_CACHE, NULL);
 }
-- 
cgit v1.2.3


From cede86acd8bd5d2205dec28db8ac86410a3a19e8 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:18 -0700
Subject: memcg: clean up checking of the disabled flag

Those checks are unnecessary, because when the subsystem is disabled
it can't be mounted, so those functions won't get called.

The check is needed in functions which will be called in other places
except cgroup.

[hugh@veritas.com: further checking of disabled flag]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 5b3759bd549..0c035647d36 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -354,6 +354,9 @@ void mem_cgroup_move_lists(struct page *page, bool active)
 	struct mem_cgroup_per_zone *mz;
 	unsigned long flags;
 
+	if (mem_cgroup_subsys.disabled)
+		return;
+
 	/*
 	 * We cannot lock_page_cgroup while holding zone's lru_lock,
 	 * because other holders of lock_page_cgroup can be interrupted
@@ -533,9 +536,6 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
 	unsigned long nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
 	struct mem_cgroup_per_zone *mz;
 
-	if (mem_cgroup_subsys.disabled)
-		return 0;
-
 	pc = kmem_cache_alloc(page_cgroup_cache, gfp_mask);
 	if (unlikely(pc == NULL))
 		goto err;
@@ -620,6 +620,9 @@ err:
 
 int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
 {
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+
 	/*
 	 * If already mapped, we don't have to account.
 	 * If page cache, page->mapping has address_space.
@@ -638,6 +641,9 @@ int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
 int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 				gfp_t gfp_mask)
 {
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+
 	/*
 	 * Corner case handling. This is called from add_to_page_cache()
 	 * in usual. But some FS (shmem) precharges this page before calling it
@@ -788,6 +794,9 @@ int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
 	int progress = 0;
 	int retry = MEM_CGROUP_RECLAIM_RETRIES;
 
+	if (mem_cgroup_subsys.disabled)
+		return 0;
+
 	rcu_read_lock();
 	mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
 	css_get(&mem->css);
@@ -857,9 +866,6 @@ static int mem_cgroup_force_empty(struct mem_cgroup *mem)
 	int ret = -EBUSY;
 	int node, zid;
 
-	if (mem_cgroup_subsys.disabled)
-		return 0;
-
 	css_get(&mem->css);
 	/*
 	 * page reclaim code (kswapd etc..) will move pages between
@@ -1103,8 +1109,6 @@ static void mem_cgroup_destroy(struct cgroup_subsys *ss,
 static int mem_cgroup_populate(struct cgroup_subsys *ss,
 				struct cgroup *cont)
 {
-	if (mem_cgroup_subsys.disabled)
-		return 0;
 	return cgroup_add_files(cont, ss, mem_cgroup_files,
 					ARRAY_SIZE(mem_cgroup_files));
 }
@@ -1117,9 +1121,6 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 	struct mm_struct *mm;
 	struct mem_cgroup *mem, *old_mem;
 
-	if (mem_cgroup_subsys.disabled)
-		return;
-
 	mm = get_task_mm(p);
 	if (mm == NULL)
 		return;
-- 
cgit v1.2.3


From 12b9804419cfb1c1bdac413f6c373af3b88d154b Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:19 -0700
Subject: res_counter: limit change support ebusy

Add an interface to set limit.  This is necessary to memory resource
controller because it shrinks usage at set limit.

Other controllers may not need this interface to shrink usage because
shrinking is not necessary or impossible.

Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/res_counter.h | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 290205dfe09..fdeadd9740d 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -158,4 +158,20 @@ static inline void res_counter_reset_failcnt(struct res_counter *cnt)
 	cnt->failcnt = 0;
 	spin_unlock_irqrestore(&cnt->lock, flags);
 }
+
+static inline int res_counter_set_limit(struct res_counter *cnt,
+		unsigned long long limit)
+{
+	unsigned long flags;
+	int ret = -EBUSY;
+
+	spin_lock_irqsave(&cnt->lock, flags);
+	if (cnt->usage < limit) {
+		cnt->limit = limit;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&cnt->lock, flags);
+	return ret;
+}
+
 #endif
-- 
cgit v1.2.3


From 628f42355389cfb596ca3a5a5f64fb9054a2a06a Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:20 -0700
Subject: memcg: limit change shrink usage

Shrinking memory usage at limit change.

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/controllers/memory.txt |  3 +--
 mm/memcontrol.c                      | 48 +++++++++++++++++++++++++++++++++---
 2 files changed, 45 insertions(+), 6 deletions(-)

diff --git a/Documentation/controllers/memory.txt b/Documentation/controllers/memory.txt
index 866b9cd9a95..9b53d582736 100644
--- a/Documentation/controllers/memory.txt
+++ b/Documentation/controllers/memory.txt
@@ -242,8 +242,7 @@ rmdir() if there are no tasks.
 1. Add support for accounting huge pages (as a separate controller)
 2. Make per-cgroup scanner reclaim not-shared pages first
 3. Teach controller to account for shared-pages
-4. Start reclamation when the limit is lowered
-5. Start reclamation in the background when the limit is
+4. Start reclamation in the background when the limit is
    not yet hit but the usage is getting closer
 
 Summary
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 0c035647d36..fba566c5132 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -812,6 +812,30 @@ int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
 	return 0;
 }
 
+int mem_cgroup_resize_limit(struct mem_cgroup *memcg, unsigned long long val)
+{
+
+	int retry_count = MEM_CGROUP_RECLAIM_RETRIES;
+	int progress;
+	int ret = 0;
+
+	while (res_counter_set_limit(&memcg->res, val)) {
+		if (signal_pending(current)) {
+			ret = -EINTR;
+			break;
+		}
+		if (!retry_count) {
+			ret = -EBUSY;
+			break;
+		}
+		progress = try_to_free_mem_cgroup_pages(memcg, GFP_KERNEL);
+		if (!progress)
+			retry_count--;
+	}
+	return ret;
+}
+
+
 /*
  * This routine traverse page_cgroup in given list and drop them all.
  * *And* this routine doesn't reclaim page itself, just removes page_cgroup.
@@ -896,13 +920,29 @@ static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
 	return res_counter_read_u64(&mem_cgroup_from_cont(cont)->res,
 				    cft->private);
 }
-
+/*
+ * The user of this function is...
+ * RES_LIMIT.
+ */
 static int mem_cgroup_write(struct cgroup *cont, struct cftype *cft,
 			    const char *buffer)
 {
-	return res_counter_write(&mem_cgroup_from_cont(cont)->res,
-				 cft->private, buffer,
-				 res_counter_memparse_write_strategy);
+	struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
+	unsigned long long val;
+	int ret;
+
+	switch (cft->private) {
+	case RES_LIMIT:
+		/* This function does all necessary parse...reuse it */
+		ret = res_counter_memparse_write_strategy(buffer, &val);
+		if (!ret)
+			ret = mem_cgroup_resize_limit(memcg, val);
+		break;
+	default:
+		ret = -EINVAL; /* should be BUG() ? */
+		break;
+	}
+	return ret;
 }
 
 static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
-- 
cgit v1.2.3


From 0b2f630a28d53b5a2082a5275bc3334b10373508 Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:21 -0700
Subject: cpusets: restructure the function update_cpumask() and
 update_nodemask()

Extract two functions from update_cpumask() and update_nodemask().They
will be used later for updating tasks' cpus_allowed and mems_allowed after
CPU/NODE offline/online.

[lizf@cn.fujitsu.com: build fix]
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: Paul Jackson <pj@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc:  Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cpuset.c | 181 ++++++++++++++++++++++++++++++++++----------------------
 1 file changed, 109 insertions(+), 72 deletions(-)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 276ce7e4f1a..7326d51eefe 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -763,6 +763,37 @@ static void cpuset_change_cpumask(struct task_struct *tsk,
 	set_cpus_allowed_ptr(tsk, &((cgroup_cs(scan->cg))->cpus_allowed));
 }
 
+/**
+ * update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
+ * @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ *
+ * Called with cgroup_mutex held
+ *
+ * The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
+ * calling callback functions for each.
+ *
+ * Return 0 if successful, -errno if not.
+ */
+static int update_tasks_cpumask(struct cpuset *cs)
+{
+	struct cgroup_scanner scan;
+	struct ptr_heap heap;
+	int retval;
+
+	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, &started_after);
+	if (retval)
+		return retval;
+
+	scan.cg = cs->css.cgroup;
+	scan.test_task = cpuset_test_cpumask;
+	scan.process_task = cpuset_change_cpumask;
+	scan.heap = &heap;
+	retval = cgroup_scan_tasks(&scan);
+
+	heap_free(&heap);
+	return retval;
+}
+
 /**
  * update_cpumask - update the cpus_allowed mask of a cpuset and all tasks in it
  * @cs: the cpuset to consider
@@ -771,8 +802,6 @@ static void cpuset_change_cpumask(struct task_struct *tsk,
 static int update_cpumask(struct cpuset *cs, const char *buf)
 {
 	struct cpuset trialcs;
-	struct cgroup_scanner scan;
-	struct ptr_heap heap;
 	int retval;
 	int is_load_balanced;
 
@@ -806,10 +835,6 @@ static int update_cpumask(struct cpuset *cs, const char *buf)
 	if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
 		return 0;
 
-	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, &started_after);
-	if (retval)
-		return retval;
-
 	is_load_balanced = is_sched_load_balance(&trialcs);
 
 	mutex_lock(&callback_mutex);
@@ -820,12 +845,9 @@ static int update_cpumask(struct cpuset *cs, const char *buf)
 	 * Scan tasks in the cpuset, and update the cpumasks of any
 	 * that need an update.
 	 */
-	scan.cg = cs->css.cgroup;
-	scan.test_task = cpuset_test_cpumask;
-	scan.process_task = cpuset_change_cpumask;
-	scan.heap = &heap;
-	cgroup_scan_tasks(&scan);
-	heap_free(&heap);
+	retval = update_tasks_cpumask(cs);
+	if (retval < 0)
+		return retval;
 
 	if (is_load_balanced)
 		rebuild_sched_domains();
@@ -881,73 +903,25 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
 	mutex_unlock(&callback_mutex);
 }
 
-/*
- * Handle user request to change the 'mems' memory placement
- * of a cpuset.  Needs to validate the request, update the
- * cpusets mems_allowed and mems_generation, and for each
- * task in the cpuset, rebind any vma mempolicies and if
- * the cpuset is marked 'memory_migrate', migrate the tasks
- * pages to the new memory.
- *
- * Call with cgroup_mutex held.  May take callback_mutex during call.
- * Will take tasklist_lock, scan tasklist for tasks in cpuset cs,
- * lock each such tasks mm->mmap_sem, scan its vma's and rebind
- * their mempolicies to the cpusets new mems_allowed.
- */
-
 static void *cpuset_being_rebound;
 
-static int update_nodemask(struct cpuset *cs, const char *buf)
+/**
+ * update_tasks_nodemask - Update the nodemasks of tasks in the cpuset.
+ * @cs: the cpuset in which each task's mems_allowed mask needs to be changed
+ * @oldmem: old mems_allowed of cpuset cs
+ *
+ * Called with cgroup_mutex held
+ * Return 0 if successful, -errno if not.
+ */
+static int update_tasks_nodemask(struct cpuset *cs, const nodemask_t *oldmem)
 {
-	struct cpuset trialcs;
-	nodemask_t oldmem;
 	struct task_struct *p;
 	struct mm_struct **mmarray;
 	int i, n, ntasks;
 	int migrate;
 	int fudge;
-	int retval;
 	struct cgroup_iter it;
-
-	/*
-	 * top_cpuset.mems_allowed tracks node_stats[N_HIGH_MEMORY];
-	 * it's read-only
-	 */
-	if (cs == &top_cpuset)
-		return -EACCES;
-
-	trialcs = *cs;
-
-	/*
-	 * An empty mems_allowed is ok iff there are no tasks in the cpuset.
-	 * Since nodelist_parse() fails on an empty mask, we special case
-	 * that parsing.  The validate_change() call ensures that cpusets
-	 * with tasks have memory.
-	 */
-	if (!*buf) {
-		nodes_clear(trialcs.mems_allowed);
-	} else {
-		retval = nodelist_parse(buf, trialcs.mems_allowed);
-		if (retval < 0)
-			goto done;
-
-		if (!nodes_subset(trialcs.mems_allowed,
-				node_states[N_HIGH_MEMORY]))
-			return -EINVAL;
-	}
-	oldmem = cs->mems_allowed;
-	if (nodes_equal(oldmem, trialcs.mems_allowed)) {
-		retval = 0;		/* Too easy - nothing to do */
-		goto done;
-	}
-	retval = validate_change(cs, &trialcs);
-	if (retval < 0)
-		goto done;
-
-	mutex_lock(&callback_mutex);
-	cs->mems_allowed = trialcs.mems_allowed;
-	cs->mems_generation = cpuset_mems_generation++;
-	mutex_unlock(&callback_mutex);
+	int retval;
 
 	cpuset_being_rebound = cs;		/* causes mpol_dup() rebind */
 
@@ -1014,7 +988,7 @@ static int update_nodemask(struct cpuset *cs, const char *buf)
 
 		mpol_rebind_mm(mm, &cs->mems_allowed);
 		if (migrate)
-			cpuset_migrate_mm(mm, &oldmem, &cs->mems_allowed);
+			cpuset_migrate_mm(mm, oldmem, &cs->mems_allowed);
 		mmput(mm);
 	}
 
@@ -1026,6 +1000,70 @@ done:
 	return retval;
 }
 
+/*
+ * Handle user request to change the 'mems' memory placement
+ * of a cpuset.  Needs to validate the request, update the
+ * cpusets mems_allowed and mems_generation, and for each
+ * task in the cpuset, rebind any vma mempolicies and if
+ * the cpuset is marked 'memory_migrate', migrate the tasks
+ * pages to the new memory.
+ *
+ * Call with cgroup_mutex held.  May take callback_mutex during call.
+ * Will take tasklist_lock, scan tasklist for tasks in cpuset cs,
+ * lock each such tasks mm->mmap_sem, scan its vma's and rebind
+ * their mempolicies to the cpusets new mems_allowed.
+ */
+static int update_nodemask(struct cpuset *cs, const char *buf)
+{
+	struct cpuset trialcs;
+	nodemask_t oldmem;
+	int retval;
+
+	/*
+	 * top_cpuset.mems_allowed tracks node_stats[N_HIGH_MEMORY];
+	 * it's read-only
+	 */
+	if (cs == &top_cpuset)
+		return -EACCES;
+
+	trialcs = *cs;
+
+	/*
+	 * An empty mems_allowed is ok iff there are no tasks in the cpuset.
+	 * Since nodelist_parse() fails on an empty mask, we special case
+	 * that parsing.  The validate_change() call ensures that cpusets
+	 * with tasks have memory.
+	 */
+	if (!*buf) {
+		nodes_clear(trialcs.mems_allowed);
+	} else {
+		retval = nodelist_parse(buf, trialcs.mems_allowed);
+		if (retval < 0)
+			goto done;
+
+		if (!nodes_subset(trialcs.mems_allowed,
+				node_states[N_HIGH_MEMORY]))
+			return -EINVAL;
+	}
+	oldmem = cs->mems_allowed;
+	if (nodes_equal(oldmem, trialcs.mems_allowed)) {
+		retval = 0;		/* Too easy - nothing to do */
+		goto done;
+	}
+	retval = validate_change(cs, &trialcs);
+	if (retval < 0)
+		goto done;
+
+	mutex_lock(&callback_mutex);
+	cs->mems_allowed = trialcs.mems_allowed;
+	cs->mems_generation = cpuset_mems_generation++;
+	mutex_unlock(&callback_mutex);
+
+	retval = update_tasks_nodemask(cs, &oldmem);
+done:
+	return retval;
+}
+
 int current_cpuset_is_being_rebound(void)
 {
 	return task_cs(current) == cpuset_being_rebound;
@@ -1935,7 +1973,6 @@ void __init cpuset_init_smp(void)
 }
 
 /**
-
  * cpuset_cpus_allowed - return cpus_allowed mask from a tasks cpuset.
  * @tsk: pointer to task_struct from which to obtain cpuset->cpus_allowed.
  * @pmask: pointer to cpumask_t variable to receive cpus_allowed set.
-- 
cgit v1.2.3


From f9b4fb8dabf38fb456c97f01aace07cb6e7c1723 Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:22 -0700
Subject: cpusets: update task's cpus_allowed and mems_allowed after CPU/NODE
 offline/online

The bug is that a task may run on the cpu/node which is not in its
cpuset.cpus/ cpuset.mems.

It can be reproduced by the following commands:
-----------------------------------
# mkdir /dev/cpuset
# mount -t cpuset xxx /dev/cpuset
# mkdir /dev/cpuset/0
# echo 0-1 > /dev/cpuset/0/cpus
# echo 0 > /dev/cpuset/0/mems
# echo $$ > /dev/cpuset/0/tasks
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo 1 > /sys/devices/system/cpu/cpu1/online
-----------------------------------

There is only CPU0 in cpuset.cpus, but the task in this cpuset runs on
both CPU0 and CPU1.

It is because the task's cpu_allowed didn't get updated after we did CPU
offline/online manipulation.  Similar for mem_allowed.

This patch fixes this bug expect for root cpuset.  Because there is a
problem about root cpuset, in that whether it is necessary to update all
the tasks in root cpuset or not after cpu/node offline/online.

If updating, some kernel threads which is bound into a specified cpu will
be unbound.

If not updating, there is a bug in root cpuset.  This bug is also caused
by offline/online manipulation.  For example, there is a dual-cpu machine.
 we create a sub cpuset in root cpuset and assign 1 to its cpus.  And then
we attach some tasks into this sub cpuset.  After this, we offline CPU1.
Now, the tasks in this new cpuset are moved into root cpuset automatically
because there is no cpu in sub cpuset.  Then we online CPU1, we find all
the tasks which doesn't belong to root cpuset originally just run on CPU0.

Maybe we need to add a flag in the task_struct to mark which task can't be
unbound?

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: Paul Jackson <pj@sgi.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cpuset.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 7326d51eefe..6eae6639e85 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1851,6 +1851,7 @@ static void scan_for_empty_cpusets(const struct cpuset *root)
 	struct cpuset *child;	/* scans child cpusets of cp */
 	struct list_head queue;
 	struct cgroup *cont;
+	nodemask_t oldmems;
 
 	INIT_LIST_HEAD(&queue);
 
@@ -1870,6 +1871,8 @@ static void scan_for_empty_cpusets(const struct cpuset *root)
 		    nodes_subset(cp->mems_allowed, node_states[N_HIGH_MEMORY]))
 			continue;
 
+		oldmems = cp->mems_allowed;
+
 		/* Remove offline cpus and mems from this cpuset. */
 		mutex_lock(&callback_mutex);
 		cpus_and(cp->cpus_allowed, cp->cpus_allowed, cpu_online_map);
@@ -1881,6 +1884,10 @@ static void scan_for_empty_cpusets(const struct cpuset *root)
 		if (cpus_empty(cp->cpus_allowed) ||
 		     nodes_empty(cp->mems_allowed))
 			remove_tasks_in_empty_cpuset(cp);
+		else {
+			update_tasks_cpumask(cp);
+			update_tasks_nodemask(cp, &oldmems);
+		}
 	}
 }
 
-- 
cgit v1.2.3


From c372e817afc629fea9ff6321313325ed0b4a855b Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:23 -0700
Subject: cpuset: avoid unnecessary sched domains rebuilding

When changing 'sched_relax_domain_level', don't rebuild sched domains if
'cpus' is empty or 'sched_load_balance' is not set.

Also make the comments of rebuild_sched_domains() more readable.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cpuset.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 6eae6639e85..60d2c4702c6 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -496,11 +496,16 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
 /*
  * rebuild_sched_domains()
  *
- * If the flag 'sched_load_balance' of any cpuset with non-empty
- * 'cpus' changes, or if the 'cpus' allowed changes in any cpuset
- * which has that flag enabled, or if any cpuset with a non-empty
- * 'cpus' is removed, then call this routine to rebuild the
- * scheduler's dynamic sched domains.
+ * This routine will be called to rebuild the scheduler's dynamic
+ * sched domains:
+ * - if the flag 'sched_load_balance' of any cpuset with non-empty
+ *   'cpus' changes,
+ * - or if the 'cpus' allowed changes in any cpuset which has that
+ *   flag enabled,
+ * - or if the 'sched_relax_domain_level' of any cpuset which has
+ *   that flag enabled and with non-empty 'cpus' changes,
+ * - or if any cpuset with non-empty 'cpus' is removed,
+ * - or if a cpu gets offlined.
  *
  * This routine builds a partial partition of the systems CPUs
  * (the set of non-overlappping cpumask_t's in the array 'part'
@@ -1076,7 +1081,8 @@ static int update_relax_domain_level(struct cpuset *cs, s64 val)
 
 	if (val != cs->relax_domain_level) {
 		cs->relax_domain_level = val;
-		rebuild_sched_domains();
+		if (!cpus_empty(cs->cpus_allowed) && is_sched_load_balance(cs))
+			rebuild_sched_domains();
 	}
 
 	return 0;
-- 
cgit v1.2.3


From 489a5393a20dcbf91104052120eb2eff8791b61b Mon Sep 17 00:00:00 2001
From: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:23 -0700
Subject: cpuset: don't pass empty cpumasks to partition_sched_domains()

I create lots of empty cpusets(empty cpumasks) and turn off the
"sched_load_balance" in top cpuset.

I found that all these empty cpumasks are passed to
partition_sched_domains() in rebuild_sched_domains(), it's very
time-consuming for partition_sched_domains() and it's not need.

It also reduce memory consumed and some works in rebuild_sched_domains()
too.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cpuset.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 60d2c4702c6..531b235e546 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -610,8 +610,13 @@ void rebuild_sched_domains(void)
 	while (__kfifo_get(q, (void *)&cp, sizeof(cp))) {
 		struct cgroup *cont;
 		struct cpuset *child;   /* scans child cpusets of cp */
+
+		if (cpus_empty(cp->cpus_allowed))
+			continue;
+
 		if (is_sched_load_balance(cp))
 			csa[csn++] = cp;
+
 		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
 			child = cgroup_cs(cont);
 			__kfifo_put(q, (void *)&child, sizeof(cp));
-- 
cgit v1.2.3


From 02412483777651a26b19a75e49c2a451a174ca9c Mon Sep 17 00:00:00 2001
From: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:24 -0700
Subject: cpuset: code-cleanup for started_after

cgroup(cgroup_scan_tasks) will initialize heap->gt for us.  This patch
removes started_after() and its helper-function.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cpuset.c | 37 ++++++-------------------------------
 1 file changed, 6 insertions(+), 31 deletions(-)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 531b235e546..ebbc9b082e4 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -709,36 +709,6 @@ done:
 	/* Don't kfree(dattr) -- partition_sched_domains() does that. */
 }
 
-static inline int started_after_time(struct task_struct *t1,
-				     struct timespec *time,
-				     struct task_struct *t2)
-{
-	int start_diff = timespec_compare(&t1->start_time, time);
-	if (start_diff > 0) {
-		return 1;
-	} else if (start_diff < 0) {
-		return 0;
-	} else {
-		/*
-		 * Arbitrarily, if two processes started at the same
-		 * time, we'll say that the lower pointer value
-		 * started first. Note that t2 may have exited by now
-		 * so this may not be a valid pointer any longer, but
-		 * that's fine - it still serves to distinguish
-		 * between two tasks started (effectively)
-		 * simultaneously.
-		 */
-		return t1 > t2;
-	}
-}
-
-static inline int started_after(void *p1, void *p2)
-{
-	struct task_struct *t1 = p1;
-	struct task_struct *t2 = p2;
-	return started_after_time(t1, &t2->start_time, t2);
-}
-
 /**
  * cpuset_test_cpumask - test a task's cpus_allowed versus its cpuset's
  * @tsk: task to test
@@ -790,7 +760,12 @@ static int update_tasks_cpumask(struct cpuset *cs)
 	struct ptr_heap heap;
 	int retval;
 
-	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, &started_after);
+	/*
+	 * cgroup_scan_tasks() will initialize heap->gt for us.
+	 * heap_init() is still needed here for we should not change
+	 * cs->cpus_allowed when heap_init() fails.
+	 */
+	retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
 	if (retval)
 		return retval;
 
-- 
cgit v1.2.3


From da5ef6bb96158b0fc0d808704237a453af449124 Mon Sep 17 00:00:00 2001
From: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 01:47:25 -0700
Subject: cpuset: two minor code-cleanups

In cpuset_update_task_memory_state() local variable struct task_struct
*tsk = current;

And local variable tsk is used 14 times and statement task_cs(tsk) is used
twice in this function.  So using task_cs(tsk) instead of task_cs(current)
is better for readability.

And "(struct cgroup_scanner *)&scan" is not good for readability also.
(and "container_of" is used in cpuset_do_move_task(), not
"(cpuset_hotplug_scanner *)scan")

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cpuset.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index ebbc9b082e4..91cf85b36dd 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -365,7 +365,7 @@ void cpuset_update_task_memory_state(void)
 		my_cpusets_mem_gen = top_cpuset.mems_generation;
 	} else {
 		rcu_read_lock();
-		my_cpusets_mem_gen = task_cs(current)->mems_generation;
+		my_cpusets_mem_gen = task_cs(tsk)->mems_generation;
 		rcu_read_unlock();
 	}
 
@@ -1777,7 +1777,7 @@ static void move_member_tasks_to_cpuset(struct cpuset *from, struct cpuset *to)
 	scan.scan.heap = NULL;
 	scan.to = to->css.cgroup;
 
-	if (cgroup_scan_tasks((struct cgroup_scanner *)&scan))
+	if (cgroup_scan_tasks(&scan.scan))
 		printk(KERN_ERR "move_member_tasks_to_cpuset: "
 				"cgroup_scan_tasks failed\n");
 }
-- 
cgit v1.2.3


From 4b7a1304267bff68260ae861784b27130e805be3 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:26 -0700
Subject: posix timers: timer_delete: remove the bogus "->it_process != NULL"
 check

sys_timer_delete() and itimer_delete() check "timer->it_process != NULL",
this looks completely bogus.  ->it_process == NULL means that this timer
is already under destruction or it is not fully initialized, this must not
happen.

	sys_timer_delete: the timer is locked, and lock_timer() can't succeed
	if ->it_process == NULL.

	itimer_delete: it is called by exit_itimers() when there are no other
	threads which can play with signal_struct->posix_timers.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/posix-timers.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index dbd8398ddb0..17f53266fb6 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -856,11 +856,10 @@ retry_delete:
 	 * This keeps any tasks waiting on the spin lock from thinking
 	 * they got something (see the lock code above).
 	 */
-	if (timer->it_process) {
-		if (timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
-			put_task_struct(timer->it_process);
-		timer->it_process = NULL;
-	}
+	if (timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
+		put_task_struct(timer->it_process);
+	timer->it_process = NULL;
+
 	unlock_timer(timer, flags);
 	release_posix_timer(timer, IT_ID_SET);
 	return 0;
@@ -885,11 +884,10 @@ retry_delete:
 	 * This keeps any tasks waiting on the spin lock from thinking
 	 * they got something (see the lock code above).
 	 */
-	if (timer->it_process) {
-		if (timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
-			put_task_struct(timer->it_process);
-		timer->it_process = NULL;
-	}
+	if (timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
+		put_task_struct(timer->it_process);
+	timer->it_process = NULL;
+
 	unlock_timer(timer, flags);
 	release_posix_timer(timer, IT_ID_SET);
 }
-- 
cgit v1.2.3


From 96347e7759e2e433c427defa0fa1adfc8cce6226 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:27 -0700
Subject: posix timers: release_posix_timer: kill the bogus
 put_task_struct(->it_process);

release_posix_timer() can't be called with ->it_process != NULL.  Once
sys_timer_create() sets ->it_process it must not call
release_posix_timer(), otherwise we can race with another thread doing
sys_timer_delete(), this timer is visible to idr_find() and unlocked.

The same is true for two other callers (actually, for any possible
caller), sys_timer_delete() and itimer_delete().  They must clear
->it_process before unlock_timer() + release_posix_timer().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/posix-timers.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 17f53266fb6..9a21681aa80 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -449,9 +449,6 @@ static void release_posix_timer(struct k_itimer *tmr, int it_id_set)
 		spin_unlock_irqrestore(&idr_lock, flags);
 	}
 	sigqueue_free(tmr->sigq);
-	if (unlikely(tmr->it_process) &&
-	    tmr->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
-		put_task_struct(tmr->it_process);
 	kmem_cache_free(posix_timers_cache, tmr);
 }
 
-- 
cgit v1.2.3


From 6715ca451cfff1c9ce4b33ad9918a1dacf43997c Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:27 -0700
Subject: signals: collect_signal: remove the unneeded sigismember() check

collect_signal() checks sigismember(&list->signal, sig), this is not
needed.  This "sig" was just found by next_signal(), so it must be valid.

We have a (completely broken) call to ->notifier in between, but it must
not play with sigpending->signal bits or unlock ->siglock.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/signal.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index 6c0958e52ea..c5b9aabb155 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -343,9 +343,6 @@ static int collect_signal(int sig, struct sigpending *list, siginfo_t *info)
 	struct sigqueue *q, *first = NULL;
 	int still_pending = 0;
 
-	if (unlikely(!sigismember(&list->signal, sig)))
-		return 0;
-
 	/*
 	 * Collect the siginfo appropriate to this signal.  Check if
 	 * there is another siginfo for the same signal.
-- 
cgit v1.2.3


From d4434207616980885205c605697868c0f07e4378 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:28 -0700
Subject: signals: collect_signal: simplify the "still_pending" logic

Factor out sigdelset() calls and remove the "still_pending" variable.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/signal.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index c5b9aabb155..50ad439377b 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -341,7 +341,6 @@ unblock_all_signals(void)
 static int collect_signal(int sig, struct sigpending *list, siginfo_t *info)
 {
 	struct sigqueue *q, *first = NULL;
-	int still_pending = 0;
 
 	/*
 	 * Collect the siginfo appropriate to this signal.  Check if
@@ -349,26 +348,24 @@ static int collect_signal(int sig, struct sigpending *list, siginfo_t *info)
 	*/
 	list_for_each_entry(q, &list->list, list) {
 		if (q->info.si_signo == sig) {
-			if (first) {
-				still_pending = 1;
-				break;
-			}
+			if (first)
+				goto still_pending;
 			first = q;
 		}
 	}
+
+	sigdelset(&list->signal, sig);
+
 	if (first) {
+still_pending:
 		list_del_init(&first->list);
 		copy_siginfo(info, &first->info);
 		__sigqueue_free(first);
-		if (!still_pending)
-			sigdelset(&list->signal, sig);
 	} else {
-
 		/* Ok, it wasn't in the queue.  This must be
 		   a fast-pathed signal or we must have been
 		   out of queue space.  So zero out the info.
 		 */
-		sigdelset(&list->signal, sig);
 		info->si_signo = sig;
 		info->si_errno = 0;
 		info->si_code = 0;
-- 
cgit v1.2.3


From 100360f03077663b7bef3af44805b6cf700c3bee Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:29 -0700
Subject: signals: change collect_signal() to return void

With the recent changes collect_signal() always returns true.  Change it
to return void and update the single caller.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/signal.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index 50ad439377b..fea236fe0b5 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -338,7 +338,7 @@ unblock_all_signals(void)
 	spin_unlock_irqrestore(&current->sighand->siglock, flags);
 }
 
-static int collect_signal(int sig, struct sigpending *list, siginfo_t *info)
+static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
 {
 	struct sigqueue *q, *first = NULL;
 
@@ -372,7 +372,6 @@ still_pending:
 		info->si_pid = 0;
 		info->si_uid = 0;
 	}
-	return 1;
 }
 
 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
@@ -390,8 +389,7 @@ static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
 			}
 		}
 
-		if (!collect_signal(sig, pending, info))
-			sig = 0;
+		collect_signal(sig, pending, info);
 	}
 
 	return sig;
-- 
cgit v1.2.3


From 3854a771821c970065e3203a0b40ddc4101538cc Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:29 -0700
Subject: __exit_signal: don't take rcu lock

There is no reason for rcu_read_lock() in __exit_signal().  tsk->sighand
can only be changed if tsk does exec, obviously this is not possible.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/exit.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/kernel/exit.c b/kernel/exit.c
index 93d2711b938..a7799d8a640 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -85,7 +85,6 @@ static void __exit_signal(struct task_struct *tsk)
 	BUG_ON(!sig);
 	BUG_ON(!atomic_read(&sig->count));
 
-	rcu_read_lock();
 	sighand = rcu_dereference(tsk->sighand);
 	spin_lock(&sighand->siglock);
 
@@ -136,7 +135,6 @@ static void __exit_signal(struct task_struct *tsk)
 	tsk->signal = NULL;
 	tsk->sighand = NULL;
 	spin_unlock(&sighand->siglock);
-	rcu_read_unlock();
 
 	__cleanup_sighand(sighand);
 	clear_tsk_thread_flag(tsk,TIF_SIGPENDING);
-- 
cgit v1.2.3


From 92413d771e7123304fb4b9efd2a00cccc946e383 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:30 -0700
Subject: signals: dequeue_signal: don't check SIGNAL_GROUP_EXIT when setting
 SIGNAL_STOP_DEQUEUED

dequeue_signal() checks SIGNAL_GROUP_EXIT before setting
SIGNAL_STOP_DEQUEUED.  This was added by
788e05a67c343fa22f2ae1d3ca264e7f15c25eaf a long ago to avoid the
coredump/SIGSTOP race.

Since then the related code was changed, and now this subtle check is both
incomplete and unneeded at the same time.  It is incomplete because
nowadays exec() doesn't set SIGNAL_GROUP_EXIT, so in fact we should check
signal_group_exit() to avoid a similar race.  Fortunately, we doesn't need
the check at all.  The only function which relies on SIGNAL_STOP_DEQUEUED
is do_signal_stop(), and it ignores this flag if signal_group_exit() == T,
this covers the SIGNAL_GROUP_EXIT case.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/signal.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index fea236fe0b5..15f901a26ec 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -454,8 +454,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
 		 * is to alert stop-signal processing code when another
 		 * processor has come along and cleared the flag.
 		 */
-		if (!(tsk->signal->flags & SIGNAL_GROUP_EXIT))
-			tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
+		tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
 	}
 	if ((info->si_code & __SI_MASK) == __SI_TIMER && info->si_sys_private) {
 		/*
-- 
cgit v1.2.3


From 2b201a9eddf509e8e935b45e573648e36f4b623f Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:31 -0700
Subject: signals: do_signal_stop: kill the SIGNAL_UNKILLABLE check

fae5fa44f1fd079ffbed8e0add929dd7bbd1347f changed do_signal_stop() to check
SIGNAL_UNKILLABLE, this wasn't needed.  If signal_group_exit() == F, the
signal sent to SIGNAL_UNKILLABLE task must be already filtered out by the
caller, get_signal_to_deliver().  And if signal_group_exit() == T we are
not going to stop.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/signal.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index 15f901a26ec..0514da573f2 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1649,8 +1649,7 @@ static int do_signal_stop(int signr)
 	} else {
 		struct task_struct *t;
 
-		if (unlikely((sig->flags & (SIGNAL_STOP_DEQUEUED | SIGNAL_UNKILLABLE))
-					 != SIGNAL_STOP_DEQUEUED) ||
+		if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED) ||
 		    unlikely(signal_group_exit(sig)))
 			return 0;
 		/*
-- 
cgit v1.2.3


From e4901f92a8dbe843e76651a50f7a2a6dd3d53474 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:31 -0700
Subject: coredump: zap_threads: comments && use while_each_thread()

No changes in fs/exec.o

The for_each_process() loop in zap_threads() is very subtle, it is not
clear why we don't race with fork/exit/exec.  Add the fat comment.

Also, change the code to use while_each_thread().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 39 ++++++++++++++++++++++++++++++++-------
 1 file changed, 32 insertions(+), 7 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index e41aef0fb35..af249af4cca 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1517,7 +1517,7 @@ static void zap_process(struct task_struct *start)
 			sigaddset(&t->pending.signal, SIGKILL);
 			signal_wake_up(t, 1);
 		}
-	} while ((t = next_thread(t)) != start);
+	} while_each_thread(start, t);
 }
 
 static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
@@ -1539,7 +1539,36 @@ static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
 
 	if (atomic_read(&mm->mm_users) == mm->core_waiters + 1)
 		goto done;
-
+	/*
+	 * We should find and kill all tasks which use this mm, and we should
+	 * count them correctly into mm->core_waiters. We don't take tasklist
+	 * lock, but this is safe wrt:
+	 *
+	 * fork:
+	 *	None of sub-threads can fork after zap_process(leader). All
+	 *	processes which were created before this point should be
+	 *	visible to zap_threads() because copy_process() adds the new
+	 *	process to the tail of init_task.tasks list, and lock/unlock
+	 *	of ->siglock provides a memory barrier.
+	 *
+	 * do_exit:
+	 *	The caller holds mm->mmap_sem. This means that the task which
+	 *	uses this mm can't pass exit_mm(), so it can't exit or clear
+	 *	its ->mm.
+	 *
+	 * de_thread:
+	 *	It does list_replace_rcu(&leader->tasks, &current->tasks),
+	 *	we must see either old or new leader, this does not matter.
+	 *	However, it can change p->sighand, so lock_task_sighand(p)
+	 *	must be used. Since p->mm != NULL and we hold ->mmap_sem
+	 *	it can't fail.
+	 *
+	 *	Note also that "g" can be the old leader with ->mm == NULL
+	 *	and already unhashed and thus removed from ->thread_group.
+	 *	This is OK, __unhash_process()->list_del_rcu() does not
+	 *	clear the ->next pointer, we will find the new leader via
+	 *	next_thread().
+	 */
 	rcu_read_lock();
 	for_each_process(g) {
 		if (g == tsk->group_leader)
@@ -1549,17 +1578,13 @@ static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
 		do {
 			if (p->mm) {
 				if (p->mm == mm) {
-					/*
-					 * p->sighand can't disappear, but
-					 * may be changed by de_thread()
-					 */
 					lock_task_sighand(p, &flags);
 					zap_process(p);
 					unlock_task_sighand(p, &flags);
 				}
 				break;
 			}
-		} while ((p = next_thread(p)) != g);
+		} while_each_thread(g, p);
 	}
 	rcu_read_unlock();
 done:
-- 
cgit v1.2.3


From d8878ba3f05ae5bbfad5a6e72e5121c0ea35f989 Mon Sep 17 00:00:00 2001
From: Michael Kerrisk <mtk.manpages@googlemail.com>
Date: Fri, 25 Jul 2008 01:47:32 -0700
Subject: signals: make siginfo_t si_utime + si_sstime report times in USER_HZ,
 not HZ

In the switch to configurable HZ in 2.6, the treatment of the si_utime and
si_stime fields that are exposed to userland via the siginfo structure
looks to have been botched.  As things stand, these fields report times in
units of HZ, so that userland gets information that varies depending on
the HZ that the kernel was configured with.  This patch changes the
reported values to use USER_HZ units.

Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/signal.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index 0514da573f2..ba60eeeb63a 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1370,10 +1370,9 @@ void do_notify_parent(struct task_struct *tsk, int sig)
 
 	info.si_uid = tsk->uid;
 
-	/* FIXME: find out whether or not this is supposed to be c*time. */
-	info.si_utime = cputime_to_jiffies(cputime_add(tsk->utime,
+	info.si_utime = cputime_to_clock_t(cputime_add(tsk->utime,
 						       tsk->signal->utime));
-	info.si_stime = cputime_to_jiffies(cputime_add(tsk->stime,
+	info.si_stime = cputime_to_clock_t(cputime_add(tsk->stime,
 						       tsk->signal->stime));
 
 	info.si_status = tsk->exit_code & 0x7f;
@@ -1441,9 +1440,8 @@ static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
 
 	info.si_uid = tsk->uid;
 
-	/* FIXME: find out whether or not this is supposed to be c*time. */
-	info.si_utime = cputime_to_jiffies(tsk->utime);
-	info.si_stime = cputime_to_jiffies(tsk->stime);
+	info.si_utime = cputime_to_clock_t(tsk->utime);
+	info.si_stime = cputime_to_clock_t(tsk->stime);
 
  	info.si_code = why;
  	switch (why) {
-- 
cgit v1.2.3


From bc64efd220dcd4449aef8dd2564d73127b583b09 Mon Sep 17 00:00:00 2001
From: Gustavo Fernando Padovan <gustavo@las.ic.unicamp.br>
Date: Fri, 25 Jul 2008 01:47:33 -0700
Subject: kernel/signal.c: change vars pid and tgid types to pid_t

Change the type of pid and tgid variables from int to the POSIX type
pid_t.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/signal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index ba60eeeb63a..fdab7b363fa 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1116,7 +1116,7 @@ EXPORT_SYMBOL_GPL(kill_pid_info_as_uid);
  * is probably wrong.  Should make it like BSD or SYSV.
  */
 
-static int kill_something_info(int sig, struct siginfo *info, int pid)
+static int kill_something_info(int sig, struct siginfo *info, pid_t pid)
 {
 	int ret;
 
@@ -2184,7 +2184,7 @@ sys_rt_sigtimedwait(const sigset_t __user *uthese,
 }
 
 asmlinkage long
-sys_kill(int pid, int sig)
+sys_kill(pid_t pid, int sig)
 {
 	struct siginfo info;
 
@@ -2197,7 +2197,7 @@ sys_kill(int pid, int sig)
 	return kill_something_info(sig, &info, pid);
 }
 
-static int do_tkill(int tgid, int pid, int sig)
+static int do_tkill(pid_t tgid, pid_t pid, int sig)
 {
 	int error;
 	struct siginfo info;
@@ -2243,7 +2243,7 @@ static int do_tkill(int tgid, int pid, int sig)
  *  exists but it's not belonging to the target process anymore. This
  *  method solves the problem of threads exiting and PIDs getting reused.
  */
-asmlinkage long sys_tgkill(int tgid, int pid, int sig)
+asmlinkage long sys_tgkill(pid_t tgid, pid_t pid, int sig)
 {
 	/* This is only valid for single tasks */
 	if (pid <= 0 || tgid <= 0)
@@ -2256,7 +2256,7 @@ asmlinkage long sys_tgkill(int tgid, int pid, int sig)
  *  Send a signal to only one task, even if it's a CLONE_THREAD task.
  */
 asmlinkage long
-sys_tkill(int pid, int sig)
+sys_tkill(pid_t pid, int sig)
 {
 	/* This is only valid for single tasks */
 	if (pid <= 0)
@@ -2266,7 +2266,7 @@ sys_tkill(int pid, int sig)
 }
 
 asmlinkage long
-sys_rt_sigqueueinfo(int pid, int sig, siginfo_t __user *uinfo)
+sys_rt_sigqueueinfo(pid_t pid, int sig, siginfo_t __user *uinfo)
 {
 	siginfo_t info;
 
-- 
cgit v1.2.3


From f22ab814a24e654b1de24db0c5f8b57b5ab2026a Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:47:34 -0700
Subject: include/asm/ptrace.h userspace headers cleanup

This patch contains the following cleanups for the asm/ptrace.h
userspace headers:

- include/asm-generic/Kbuild.asm already lists ptrace.h, remove
  the superfluous listings in the Kbuild files of the following
  architectures:
  - cris
  - frv
  - powerpc
  - x86
- don't expose function prototypes and macros to userspace:
  - arm
  - blackfin
  - cris
  - mn10300
  - parisc
- remove #ifdef CONFIG_'s around #define's:
  - blackfin
  - m68knommu
- sh: AFAIK __SH5__ should work in both kernel and userspace,
      no need to leak CONFIG_SUPERH64 to userspace
- xtensa: cosmetical change to remove empty
            #ifndef __ASSEMBLY__ #else #endif
          from the userspace headers

Not changed by this patch is the fact that the following architectures
have a different struct pt_regs depending on CONFIG_ variables:
- h8300
- m68knommu
- mips

This does not work in userspace.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Chris Zankel <chris@zankel.net>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-arm/ptrace.h           |  6 ++----
 include/asm-blackfin/ptrace.h      |  6 ++++--
 include/asm-cris/arch-v10/Kbuild   |  1 -
 include/asm-cris/arch-v10/ptrace.h |  4 ++++
 include/asm-cris/arch-v32/Kbuild   |  1 -
 include/asm-cris/arch-v32/ptrace.h |  4 ++++
 include/asm-cris/ptrace.h          |  4 +++-
 include/asm-frv/Kbuild             |  1 -
 include/asm-m68knommu/ptrace.h     |  2 --
 include/asm-mn10300/ptrace.h       |  8 ++++++--
 include/asm-parisc/ptrace.h        |  4 +++-
 include/asm-powerpc/Kbuild         |  1 -
 include/asm-sh/ptrace.h            |  2 +-
 include/asm-x86/Kbuild             |  1 -
 include/asm-xtensa/ptrace.h        | 10 +++++-----
 15 files changed, 32 insertions(+), 23 deletions(-)

diff --git a/include/asm-arm/ptrace.h b/include/asm-arm/ptrace.h
index 7aaa206cb54..8382b7510f9 100644
--- a/include/asm-arm/ptrace.h
+++ b/include/asm-arm/ptrace.h
@@ -139,8 +139,6 @@ static inline int valid_user_regs(struct pt_regs *regs)
 	return 0;
 }
 
-#endif	/* __KERNEL__ */
-
 #define pc_pointer(v) \
 	((v) & ~PCMASK)
 
@@ -153,10 +151,10 @@ extern unsigned long profile_pc(struct pt_regs *regs);
 #define profile_pc(regs) instruction_pointer(regs)
 #endif
 
-#ifdef __KERNEL__
 #define predicate(x)		((x) & 0xf0000000)
 #define PREDICATE_ALWAYS	0xe0000000
-#endif
+
+#endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
index b8346cd3a6f..a45a80e54ad 100644
--- a/include/asm-blackfin/ptrace.h
+++ b/include/asm-blackfin/ptrace.h
@@ -83,14 +83,14 @@ struct pt_regs {
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13	/* ptrace signal  */
 
-#ifdef CONFIG_BINFMT_ELF_FDPIC
 #define PTRACE_GETFDPIC           31
 #define PTRACE_GETFDPIC_EXEC      0
 #define PTRACE_GETFDPIC_INTERP    1
-#endif
 
 #define PS_S  (0x0002)
 
+#ifdef __KERNEL__
+
 /* user_mode returns true if only one bit is set in IPEND, other than the
    master interrupt enable.  */
 #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
@@ -98,6 +98,8 @@ struct pt_regs {
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
+#endif  /*  __KERNEL__  */
+
 #endif				/* __ASSEMBLY__ */
 
 /*
diff --git a/include/asm-cris/arch-v10/Kbuild b/include/asm-cris/arch-v10/Kbuild
index 60e7e1b73ce..7a192e1290b 100644
--- a/include/asm-cris/arch-v10/Kbuild
+++ b/include/asm-cris/arch-v10/Kbuild
@@ -1,4 +1,3 @@
-header-y += ptrace.h
 header-y += user.h
 header-y += svinto.h
 header-y += sv_addr_ag.h
diff --git a/include/asm-cris/arch-v10/ptrace.h b/include/asm-cris/arch-v10/ptrace.h
index fb14c5ee37f..2f464eab3a5 100644
--- a/include/asm-cris/arch-v10/ptrace.h
+++ b/include/asm-cris/arch-v10/ptrace.h
@@ -106,10 +106,14 @@ struct switch_stack {
 	unsigned long return_ip; /* ip that _resume will return to */
 };
 
+#ifdef __KERNEL__
+
 /* bit 8 is user-mode flag */
 #define user_mode(regs) (((regs)->dccr & 0x100) != 0)
 #define instruction_pointer(regs) ((regs)->irp)
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
+#endif  /*  __KERNEL__  */
+
 #endif
diff --git a/include/asm-cris/arch-v32/Kbuild b/include/asm-cris/arch-v32/Kbuild
index a0ec545e242..35f2fc4f993 100644
--- a/include/asm-cris/arch-v32/Kbuild
+++ b/include/asm-cris/arch-v32/Kbuild
@@ -1,3 +1,2 @@
-header-y += ptrace.h
 header-y += user.h
 header-y += cryptocop.h
diff --git a/include/asm-cris/arch-v32/ptrace.h b/include/asm-cris/arch-v32/ptrace.h
index 516cc7062d9..41f4e8662bc 100644
--- a/include/asm-cris/arch-v32/ptrace.h
+++ b/include/asm-cris/arch-v32/ptrace.h
@@ -106,9 +106,13 @@ struct switch_stack {
 	unsigned long return_ip; /* ip that _resume will return to */
 };
 
+#ifdef __KERNEL__
+
 #define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0)
 #define instruction_pointer(regs) ((regs)->erp)
 extern void show_regs(struct pt_regs *);
 #define profile_pc(regs) instruction_pointer(regs)
 
+#endif  /*  __KERNEL__  */
+
 #endif
diff --git a/include/asm-cris/ptrace.h b/include/asm-cris/ptrace.h
index 1ec69a7ea83..d910925e317 100644
--- a/include/asm-cris/ptrace.h
+++ b/include/asm-cris/ptrace.h
@@ -4,11 +4,13 @@
 #include <asm/arch/ptrace.h>
 
 #ifdef __KERNEL__
+
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13
-#endif
 
 #define profile_pc(regs) instruction_pointer(regs)
 
+#endif /* __KERNEL__ */
+
 #endif /* _CRIS_PTRACE_H */
diff --git a/include/asm-frv/Kbuild b/include/asm-frv/Kbuild
index bc3f12c5b7e..0f8956def73 100644
--- a/include/asm-frv/Kbuild
+++ b/include/asm-frv/Kbuild
@@ -3,4 +3,3 @@ include include/asm-generic/Kbuild.asm
 header-y += registers.h
 
 unifdef-y += termios.h
-unifdef-y += ptrace.h
diff --git a/include/asm-m68knommu/ptrace.h b/include/asm-m68knommu/ptrace.h
index 47258e86e8c..8c9194b9854 100644
--- a/include/asm-m68knommu/ptrace.h
+++ b/include/asm-m68knommu/ptrace.h
@@ -68,10 +68,8 @@ struct switch_stack {
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13
-#ifdef CONFIG_FPU
 #define PTRACE_GETFPREGS          14
 #define PTRACE_SETFPREGS          15
-#endif
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-mn10300/ptrace.h b/include/asm-mn10300/ptrace.h
index b3684689fcc..7b06cc623d8 100644
--- a/include/asm-mn10300/ptrace.h
+++ b/include/asm-mn10300/ptrace.h
@@ -88,12 +88,16 @@ extern struct pt_regs *__frame; /* current frame pointer */
 /* options set using PTRACE_SETOPTIONS */
 #define PTRACE_O_TRACESYSGOOD     0x00000001
 
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+#if defined(__KERNEL__)
+
+#if !defined(__ASSEMBLY__)
 #define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)
 #define instruction_pointer(regs)	((regs)->pc)
 extern void show_regs(struct pt_regs *);
-#endif
+#endif  /*  !__ASSEMBLY  */
 
 #define profile_pc(regs) ((regs)->pc)
 
+#endif  /*  __KERNEL__  */
+
 #endif /* _ASM_PTRACE_H */
diff --git a/include/asm-parisc/ptrace.h b/include/asm-parisc/ptrace.h
index 93f990e418f..3e94c5d85ff 100644
--- a/include/asm-parisc/ptrace.h
+++ b/include/asm-parisc/ptrace.h
@@ -33,7 +33,6 @@ struct pt_regs {
 	unsigned long ipsw;	/* CR22 */
 };
 
-#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 /*
  * The numbers chosen here are somewhat arbitrary but absolutely MUST
  * not overlap with any of the number assigned in <linux/ptrace.h>.
@@ -43,8 +42,11 @@ struct pt_regs {
  * since we have taken branch traps too)
  */
 #define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+
 #ifdef __KERNEL__
 
+#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
+
 /* XXX should we use iaoq[1] or iaoq[0] ? */
 #define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
 #define user_space(regs)		(((regs)->iasq[1] != 0) ? 1 : 0)
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
index 04ce8f8a2ee..5ab7d7fe198 100644
--- a/include/asm-powerpc/Kbuild
+++ b/include/asm-powerpc/Kbuild
@@ -29,7 +29,6 @@ unifdef-y += elf.h
 unifdef-y += nvram.h
 unifdef-y += param.h
 unifdef-y += posix_types.h
-unifdef-y += ptrace.h
 unifdef-y += seccomp.h
 unifdef-y += signal.h
 unifdef-y += spu_info.h
diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h
index 8d6c92b3e77..7d36dc3bee6 100644
--- a/include/asm-sh/ptrace.h
+++ b/include/asm-sh/ptrace.h
@@ -5,7 +5,7 @@
  * Copyright (C) 1999, 2000  Niibe Yutaka
  *
  */
-#if defined(__SH5__) || defined(CONFIG_SUPERH64)
+#if defined(__SH5__)
 struct pt_regs {
 	unsigned long long pc;
 	unsigned long long sr;
diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild
index 1e3554596f7..00473f7dd81 100644
--- a/include/asm-x86/Kbuild
+++ b/include/asm-x86/Kbuild
@@ -19,7 +19,6 @@ unifdef-y += msr.h
 unifdef-y += mtrr.h
 unifdef-y += posix_types_32.h
 unifdef-y += posix_types_64.h
-unifdef-y += ptrace.h
 unifdef-y += unistd_32.h
 unifdef-y += unistd_64.h
 unifdef-y += vm86.h
diff --git a/include/asm-xtensa/ptrace.h b/include/asm-xtensa/ptrace.h
index 422c73e2693..089b0db4481 100644
--- a/include/asm-xtensa/ptrace.h
+++ b/include/asm-xtensa/ptrace.h
@@ -73,10 +73,10 @@
 #define PTRACE_GETXTREGS	18
 #define PTRACE_SETXTREGS	19
 
-#ifndef __ASSEMBLY__
-
 #ifdef __KERNEL__
 
+#ifndef __ASSEMBLY__
+
 /*
  * This struct defines the way the registers are stored on the
  * kernel stack during a system call or other kernel entry.
@@ -122,14 +122,14 @@ extern void show_regs(struct pt_regs *);
 # ifndef CONFIG_SMP
 #  define profile_pc(regs) instruction_pointer(regs)
 # endif
-#endif /* __KERNEL__ */
 
 #else	/* __ASSEMBLY__ */
 
-#ifdef __KERNEL__
 # include <asm/asm-offsets.h>
 #define PT_REGS_OFFSET	  (KERNEL_STACK_SIZE - PT_USER_SIZE)
-#endif
 
 #endif	/* !__ASSEMBLY__ */
+
+#endif  /* __KERNEL__ */
+
 #endif	/* _XTENSA_PTRACE_H */
-- 
cgit v1.2.3


From 364d3c13c17f45da6d638011078d4c4d3070d719 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:36 -0700
Subject: ptrace: give more respect to SIGKILL

ptrace_stop() has some complicated checks to prevent the scheduling in the
TASK_TRACED state with the pending SIGKILL, but these checks are racy, and
they depend on arch_ptrace_stop_needed().

This patch assumes that the traced task should die asap if it was killed by
SIGKILL, in that case schedule()->signal_pending_state() has no reason to
ignore the TASK_WAKEKILL part of TASK_TRACED, and we can kill this nasty
special case.

Note: do_exit()->ptrace_notify() is special, the killed task can already
dequeue SIGKILL at this point. Another indication that fatal_signal_pending()
is not exactly right.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sched.h | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index 6aca4a16e37..79e749dbf81 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2054,9 +2054,6 @@ static inline int signal_pending_state(long state, struct task_struct *p)
 	if (!signal_pending(p))
 		return 0;
 
-	if (state & (__TASK_STOPPED | __TASK_TRACED))
-		return 0;
-
 	return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
 }
 
-- 
cgit v1.2.3


From 3d749b9e676b26584a47e75c235aa6f69d0697ae Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:37 -0700
Subject: ptrace: simplify ptrace_stop()->sigkill_pending() path

1. SIGKILL can't be blocked, remove this check from sigkill_pending().

2. When ptrace_stop() sees sigkill_pending() == T, it can just return.
   Kill "int killed" and simplify the code. This also is more correct,
   the tracer shouldn't see us in TASK_TRACED if we are not going to
   stop.

I strongly believe this code needs further changes.  We should do the "was
this task killed" check unconditionally, currently it depends on
arch_ptrace_stop_needed().  On the other hand, sigkill_pending() isn't
very clever.  If the task was killed tkill(SIGKILL), the signal can be
already dequeued if the caller is do_exit().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/signal.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index fdab7b363fa..39c1706edf0 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1496,9 +1496,8 @@ static inline int may_ptrace_stop(void)
  */
 static int sigkill_pending(struct task_struct *tsk)
 {
-	return ((sigismember(&tsk->pending.signal, SIGKILL) ||
-		 sigismember(&tsk->signal->shared_pending.signal, SIGKILL)) &&
-		!unlikely(sigismember(&tsk->blocked, SIGKILL)));
+	return	sigismember(&tsk->pending.signal, SIGKILL) ||
+		sigismember(&tsk->signal->shared_pending.signal, SIGKILL);
 }
 
 /*
@@ -1514,8 +1513,6 @@ static int sigkill_pending(struct task_struct *tsk)
  */
 static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
 {
-	int killed = 0;
-
 	if (arch_ptrace_stop_needed(exit_code, info)) {
 		/*
 		 * The arch code has something special to do before a
@@ -1531,7 +1528,8 @@ static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
 		spin_unlock_irq(&current->sighand->siglock);
 		arch_ptrace_stop(exit_code, info);
 		spin_lock_irq(&current->sighand->siglock);
-		killed = sigkill_pending(current);
+		if (sigkill_pending(current))
+			return;
 	}
 
 	/*
@@ -1548,7 +1546,7 @@ static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
 	__set_current_state(TASK_TRACED);
 	spin_unlock_irq(&current->sighand->siglock);
 	read_lock(&tasklist_lock);
-	if (!unlikely(killed) && may_ptrace_stop()) {
+	if (may_ptrace_stop()) {
 		do_notify_parent_cldstop(current, CLD_TRAPPED);
 		read_unlock(&tasklist_lock);
 		schedule();
-- 
cgit v1.2.3


From 7b34e4283c685f5cc6ba6d30e939906eee0d4bcf Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:37 -0700
Subject: introduce PF_KTHREAD flag

Introduce the new PF_KTHREAD flag to mark the kernel threads.  It is set
by INIT_TASK() and copied to the forked childs (we could set it in
kthreadd() along with PF_NOFREEZE instead).

daemonize() was changed as well.  In that case testing of PF_KTHREAD is
racy, but daemonize() is hopeless anyway.

This flag is cleared in do_execve(), before search_binary_handler().
Probably not the best place, we can do this in exec_mmap() or in
start_thread(), or clear it along with PF_FORKNOEXEC.  But I think this
doesn't matter in practice, and if do_execve() fails kthread should die
soon.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c                 | 1 +
 include/linux/init_task.h | 2 +-
 include/linux/sched.h     | 1 +
 kernel/exit.c             | 2 +-
 4 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index af249af4cca..cd2e8c9b124 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1326,6 +1326,7 @@ int do_execve(char * filename,
 	if (retval < 0)
 		goto out;
 
+	current->flags &= ~PF_KTHREAD;
 	retval = search_binary_handler(bprm,regs);
 	if (retval >= 0) {
 		/* execve success */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 93c45acf249..021d8e720c7 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -122,7 +122,7 @@ extern struct group_info init_groups;
 	.state		= 0,						\
 	.stack		= &init_thread_info,				\
 	.usage		= ATOMIC_INIT(2),				\
-	.flags		= 0,						\
+	.flags		= PF_KTHREAD,					\
 	.lock_depth	= -1,						\
 	.prio		= MAX_PRIO-20,					\
 	.static_prio	= MAX_PRIO-20,					\
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 79e749dbf81..eec64a4adb9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1483,6 +1483,7 @@ static inline void put_task_struct(struct task_struct *t)
 #define PF_EXITING	0x00000004	/* getting shut down */
 #define PF_EXITPIDONE	0x00000008	/* pi exit done on shut down */
 #define PF_VCPU		0x00000010	/* I'm a virtual CPU */
+#define PF_KTHREAD	0x00000020	/* I am a kernel thread */
 #define PF_FORKNOEXEC	0x00000040	/* forked but didn't exec */
 #define PF_SUPERPRIV	0x00000100	/* used super-user privileges */
 #define PF_DUMPCORE	0x00000200	/* dumped core */
diff --git a/kernel/exit.c b/kernel/exit.c
index a7799d8a640..28a44a2612d 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -430,7 +430,7 @@ void daemonize(const char *name, ...)
 	 * We don't want to have TIF_FREEZE set if the system-wide hibernation
 	 * or suspend transition begins right now.
 	 */
-	current->flags |= PF_NOFREEZE;
+	current->flags |= (PF_NOFREEZE | PF_KTHREAD);
 
 	if (current->nsproxy != &init_nsproxy) {
 		get_nsproxy(&init_nsproxy);
-- 
cgit v1.2.3


From 246bb0b1deb29726990620d8b5e55ca29f331362 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:38 -0700
Subject: kill PF_BORROWED_MM in favour of PF_KTHREAD

Kill PF_BORROWED_MM.  Change use_mm/unuse_mm to not play with ->flags, and
do s/PF_BORROWED_MM/PF_KTHREAD/ for a couple of other users.

No functional changes yet.  But this allows us to do further
fixes/cleanups.

oom_kill/ptrace/etc often check "p->mm != NULL" to filter out the
kthreads, this is wrong because of use_mm().  The problem with
PF_BORROWED_MM is that we need task_lock() to avoid races.  With this
patch we can check PF_KTHREAD directly, or use a simple lockless helper:

	/* The result must not be dereferenced !!! */
	struct mm_struct *__get_task_mm(struct task_struct *tsk)
	{
		if (tsk->flags & PF_KTHREAD)
			return NULL;
		return tsk->mm;
	}

Note also ecard_task().  It runs with ->mm != NULL, but it's the kernel
thread without PF_BORROWED_MM.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/aio.c              | 2 --
 include/linux/sched.h | 3 +--
 kernel/fork.c         | 4 ++--
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/fs/aio.c b/fs/aio.c
index 0fb3117ddd9..0051fd94b44 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -586,7 +586,6 @@ static void use_mm(struct mm_struct *mm)
 	struct task_struct *tsk = current;
 
 	task_lock(tsk);
-	tsk->flags |= PF_BORROWED_MM;
 	active_mm = tsk->active_mm;
 	atomic_inc(&mm->mm_count);
 	tsk->mm = mm;
@@ -610,7 +609,6 @@ static void unuse_mm(struct mm_struct *mm)
 	struct task_struct *tsk = current;
 
 	task_lock(tsk);
-	tsk->flags &= ~PF_BORROWED_MM;
 	tsk->mm = NULL;
 	/* active_mm is still 'mm' */
 	enter_lazy_tlb(mm, tsk);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index eec64a4adb9..0560999eb1d 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1483,7 +1483,6 @@ static inline void put_task_struct(struct task_struct *t)
 #define PF_EXITING	0x00000004	/* getting shut down */
 #define PF_EXITPIDONE	0x00000008	/* pi exit done on shut down */
 #define PF_VCPU		0x00000010	/* I'm a virtual CPU */
-#define PF_KTHREAD	0x00000020	/* I am a kernel thread */
 #define PF_FORKNOEXEC	0x00000040	/* forked but didn't exec */
 #define PF_SUPERPRIV	0x00000100	/* used super-user privileges */
 #define PF_DUMPCORE	0x00000200	/* dumped core */
@@ -1497,7 +1496,7 @@ static inline void put_task_struct(struct task_struct *t)
 #define PF_KSWAPD	0x00040000	/* I am kswapd */
 #define PF_SWAPOFF	0x00080000	/* I am in swapoff */
 #define PF_LESS_THROTTLE 0x00100000	/* Throttle me less: I clean memory */
-#define PF_BORROWED_MM	0x00200000	/* I am a kthread doing use_mm */
+#define PF_KTHREAD	0x00200000	/* I am a kernel thread */
 #define PF_RANDOMIZE	0x00400000	/* randomize virtual address space */
 #define PF_SWAPWRITE	0x00800000	/* Allowed to write to swap */
 #define PF_SPREAD_PAGE	0x01000000	/* Spread page cache over cpuset */
diff --git a/kernel/fork.c b/kernel/fork.c
index 228f80c9155..eeaec6893b0 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -474,7 +474,7 @@ EXPORT_SYMBOL_GPL(mmput);
 /**
  * get_task_mm - acquire a reference to the task's mm
  *
- * Returns %NULL if the task has no mm.  Checks PF_BORROWED_MM (meaning
+ * Returns %NULL if the task has no mm.  Checks PF_KTHREAD (meaning
  * this kernel workthread has transiently adopted a user mm with use_mm,
  * to do its AIO) is not set and if so returns a reference to it, after
  * bumping up the use count.  User must release the mm via mmput()
@@ -487,7 +487,7 @@ struct mm_struct *get_task_mm(struct task_struct *task)
 	task_lock(task);
 	mm = task->mm;
 	if (mm) {
-		if (task->flags & PF_BORROWED_MM)
+		if (task->flags & PF_KTHREAD)
 			mm = NULL;
 		else
 			atomic_inc(&mm->mm_users);
-- 
cgit v1.2.3


From 15b9f360c0316c06d37c09b02d85565edbaf9dd3 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:39 -0700
Subject: coredump: zap_threads() must skip kernel threads

The main loop in zap_threads() must skip kthreads which may use the same
mm.  Otherwise we "kill" this thread erroneously (for example, it can not
fork or exec after that), and the coredumping task stucks in the
TASK_UNINTERRUPTIBLE state forever because of the wrong ->core_waiters
count.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index cd2e8c9b124..e347e6ed161 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1574,11 +1574,12 @@ static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
 	for_each_process(g) {
 		if (g == tsk->group_leader)
 			continue;
-
+		if (g->flags & PF_KTHREAD)
+			continue;
 		p = g;
 		do {
 			if (p->mm) {
-				if (p->mm == mm) {
+				if (unlikely(p->mm == mm)) {
 					lock_task_sighand(p, &flags);
 					zap_process(p);
 					unlock_task_sighand(p, &flags);
-- 
cgit v1.2.3


From 24d5288f06ed8b3a368eba967d587cdb012dfdf7 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:40 -0700
Subject: coredump: elf_core_dump: skip kernel threads

linux_binfmt->core_dump() runs before the process does exit_aio(), this
means that we can hit the kernel thread which shares the same ->mm.
Afaics, nothing really bad can happen, but perhaps it makes sense to fix
this minor bug.

It is sad we have to iterate over all threads in system and use
GFP_ATOMIC.  Hopefully we can kill theses ugly do_each_thread()s, but this
needs some nontrivial changes in mm_struct and do_coredump.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/binfmt_elf.c       | 6 ++++++
 fs/binfmt_elf_fdpic.c | 3 +++
 2 files changed, 9 insertions(+)

diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 639d2d8b571..bad7d8770d7 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1520,6 +1520,9 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 	rcu_read_lock();
 	do_each_thread(g, p)
 		if (p->mm == dump_task->mm) {
+			if (p->flags & PF_KTHREAD)
+				continue;
+
 			t = kzalloc(offsetof(struct elf_thread_core_info,
 					     notes[info->thread_notes]),
 				    GFP_ATOMIC);
@@ -1724,6 +1727,9 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 		rcu_read_lock();
 		do_each_thread(g, p)
 			if (current->mm == p->mm && current != p) {
+				if (p->flags & PF_KTHREAD)
+					continue;
+
 				ets = kzalloc(sizeof(*ets), GFP_ATOMIC);
 				if (!ets) {
 					rcu_read_unlock();
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index d051a32e627..71bcc4b4d08 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1626,6 +1626,9 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs,
 		rcu_read_lock();
 		do_each_thread(g,p)
 			if (current->mm == p->mm && current != p) {
+				if (p->flags & PF_KTHREAD)
+					continue;
+
 				tmp = kzalloc(sizeof(*tmp), GFP_ATOMIC);
 				if (!tmp) {
 					rcu_read_unlock();
-- 
cgit v1.2.3


From 32ecb1f26dd50eeaac4e3f4dea4541c97848e459 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:41 -0700
Subject: coredump: turn mm->core_startup_done into the pointer to struct
 core_state

mm->core_startup_done points to "struct completion startup_done" allocated
on the coredump_wait()'s stack.  Introduce the new structure, core_state,
which holds this "struct completion".  This way we can add more info
visible to the threads participating in coredump without enlarging
mm_struct.

No changes in affected .o files.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c                | 8 ++++----
 include/linux/mm_types.h | 7 ++++++-
 kernel/exit.c            | 2 +-
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index e347e6ed161..71734568f01 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1597,13 +1597,13 @@ static int coredump_wait(int exit_code)
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	struct completion startup_done;
+	struct core_state core_state;
 	struct completion *vfork_done;
 	int core_waiters;
 
 	init_completion(&mm->core_done);
-	init_completion(&startup_done);
-	mm->core_startup_done = &startup_done;
+	init_completion(&core_state.startup);
+	mm->core_state = &core_state;
 
 	core_waiters = zap_threads(tsk, mm, exit_code);
 	up_write(&mm->mmap_sem);
@@ -1622,7 +1622,7 @@ static int coredump_wait(int exit_code)
 	}
 
 	if (core_waiters)
-		wait_for_completion(&startup_done);
+		wait_for_completion(&core_state.startup);
 fail:
 	BUG_ON(mm->core_waiters);
 	return core_waiters;
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 02a27ae7853..97819efd233 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -159,6 +159,10 @@ struct vm_area_struct {
 #endif
 };
 
+struct core_state {
+	struct completion startup;
+};
+
 struct mm_struct {
 	struct vm_area_struct * mmap;		/* list of VMAs */
 	struct rb_root mm_rb;
@@ -220,7 +224,8 @@ struct mm_struct {
 	unsigned long flags; /* Must use atomic bitops to access the bits */
 
 	/* coredumping support */
-	struct completion *core_startup_done, core_done;
+	struct core_state *core_state;
+	struct completion core_done;
 
 	/* aio bits */
 	rwlock_t		ioctx_list_lock;	/* aio lock */
diff --git a/kernel/exit.c b/kernel/exit.c
index 28a44a2612d..f7fa21dbced 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -680,7 +680,7 @@ static void exit_mm(struct task_struct * tsk)
 		up_read(&mm->mmap_sem);
 		down_write(&mm->mmap_sem);
 		if (!--mm->core_waiters)
-			complete(mm->core_startup_done);
+			complete(&mm->core_state->startup);
 		up_write(&mm->mmap_sem);
 
 		wait_for_completion(&mm->core_done);
-- 
cgit v1.2.3


From 999d9fc1670bc082928b93b11d1f2e0e417d973c Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:41 -0700
Subject: coredump: move mm->core_waiters into struct core_state

Move mm->core_waiters into "struct core_state" allocated on stack.  This
shrinks mm_struct a little bit and allows further changes.

This patch mostly does s/core_waiters/core_state.  The only essential
change is that coredump_wait() must clear mm->core_state before return.

The coredump_wait()'s path is uglified and .text grows by 30 bytes, this
is fixed by the next patch.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c                | 21 +++++++++++----------
 include/linux/mm_types.h |  2 +-
 kernel/exit.c            |  8 ++++----
 kernel/fork.c            |  2 +-
 kernel/signal.c          |  4 ++--
 5 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 71734568f01..50de3aaff4d 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -722,12 +722,10 @@ static int exec_mmap(struct mm_struct *mm)
 		 * Make sure that if there is a core dump in progress
 		 * for the old mm, we get out and die instead of going
 		 * through with the exec.  We must hold mmap_sem around
-		 * checking core_waiters and changing tsk->mm.  The
-		 * core-inducing thread will increment core_waiters for
-		 * each thread whose ->mm == old_mm.
+		 * checking core_state and changing tsk->mm.
 		 */
 		down_read(&old_mm->mmap_sem);
-		if (unlikely(old_mm->core_waiters)) {
+		if (unlikely(old_mm->core_state)) {
 			up_read(&old_mm->mmap_sem);
 			return -EINTR;
 		}
@@ -1514,7 +1512,7 @@ static void zap_process(struct task_struct *start)
 	t = start;
 	do {
 		if (t != current && t->mm) {
-			t->mm->core_waiters++;
+			t->mm->core_state->nr_threads++;
 			sigaddset(&t->pending.signal, SIGKILL);
 			signal_wake_up(t, 1);
 		}
@@ -1538,11 +1536,11 @@ static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
 	if (err)
 		return err;
 
-	if (atomic_read(&mm->mm_users) == mm->core_waiters + 1)
+	if (atomic_read(&mm->mm_users) == mm->core_state->nr_threads + 1)
 		goto done;
 	/*
 	 * We should find and kill all tasks which use this mm, and we should
-	 * count them correctly into mm->core_waiters. We don't take tasklist
+	 * count them correctly into ->nr_threads. We don't take tasklist
 	 * lock, but this is safe wrt:
 	 *
 	 * fork:
@@ -1590,7 +1588,7 @@ static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
 	}
 	rcu_read_unlock();
 done:
-	return mm->core_waiters;
+	return mm->core_state->nr_threads;
 }
 
 static int coredump_wait(int exit_code)
@@ -1603,9 +1601,12 @@ static int coredump_wait(int exit_code)
 
 	init_completion(&mm->core_done);
 	init_completion(&core_state.startup);
+	core_state.nr_threads = 0;
 	mm->core_state = &core_state;
 
 	core_waiters = zap_threads(tsk, mm, exit_code);
+	if (core_waiters < 0)
+		mm->core_state = NULL;
 	up_write(&mm->mmap_sem);
 
 	if (unlikely(core_waiters < 0))
@@ -1623,8 +1624,8 @@ static int coredump_wait(int exit_code)
 
 	if (core_waiters)
 		wait_for_completion(&core_state.startup);
+	mm->core_state = NULL;
 fail:
-	BUG_ON(mm->core_waiters);
 	return core_waiters;
 }
 
@@ -1702,7 +1703,7 @@ int do_coredump(long signr, int exit_code, struct pt_regs * regs)
 	/*
 	 * If another thread got here first, or we are not dumpable, bail out.
 	 */
-	if (mm->core_waiters || !get_dumpable(mm)) {
+	if (mm->core_state || !get_dumpable(mm)) {
 		up_write(&mm->mmap_sem);
 		goto fail;
 	}
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 97819efd233..c0b1747b61a 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -160,6 +160,7 @@ struct vm_area_struct {
 };
 
 struct core_state {
+	int nr_threads;
 	struct completion startup;
 };
 
@@ -179,7 +180,6 @@ struct mm_struct {
 	atomic_t mm_users;			/* How many users with user space? */
 	atomic_t mm_count;			/* How many references to "struct mm_struct" (users count as 1) */
 	int map_count;				/* number of VMAs */
-	int core_waiters;
 	struct rw_semaphore mmap_sem;
 	spinlock_t page_table_lock;		/* Protects page tables and some counters */
 
diff --git a/kernel/exit.c b/kernel/exit.c
index f7fa21dbced..988e232254e 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -670,16 +670,16 @@ static void exit_mm(struct task_struct * tsk)
 		return;
 	/*
 	 * Serialize with any possible pending coredump.
-	 * We must hold mmap_sem around checking core_waiters
+	 * We must hold mmap_sem around checking core_state
 	 * and clearing tsk->mm.  The core-inducing thread
-	 * will increment core_waiters for each thread in the
+	 * will increment ->nr_threads for each thread in the
 	 * group with ->mm != NULL.
 	 */
 	down_read(&mm->mmap_sem);
-	if (mm->core_waiters) {
+	if (mm->core_state) {
 		up_read(&mm->mmap_sem);
 		down_write(&mm->mmap_sem);
-		if (!--mm->core_waiters)
+		if (!--mm->core_state->nr_threads)
 			complete(&mm->core_state->startup);
 		up_write(&mm->mmap_sem);
 
diff --git a/kernel/fork.c b/kernel/fork.c
index eeaec6893b0..813d5c89b9d 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -400,7 +400,7 @@ static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p)
 	INIT_LIST_HEAD(&mm->mmlist);
 	mm->flags = (current->mm) ? current->mm->flags
 				  : MMF_DUMP_FILTER_DEFAULT;
-	mm->core_waiters = 0;
+	mm->core_state = NULL;
 	mm->nr_ptes = 0;
 	set_mm_counter(mm, file_rss, 0);
 	set_mm_counter(mm, anon_rss, 0);
diff --git a/kernel/signal.c b/kernel/signal.c
index 39c1706edf0..5c7b7eaa0dc 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1480,10 +1480,10 @@ static inline int may_ptrace_stop(void)
 	 * is a deadlock situation, and pointless because our tracer
 	 * is dead so don't allow us to stop.
 	 * If SIGKILL was already sent before the caller unlocked
-	 * ->siglock we must see ->core_waiters != 0. Otherwise it
+	 * ->siglock we must see ->core_state != NULL. Otherwise it
 	 * is safe to enter schedule().
 	 */
-	if (unlikely(current->mm->core_waiters) &&
+	if (unlikely(current->mm->core_state) &&
 	    unlikely(current->mm == current->parent->mm))
 		return 0;
 
-- 
cgit v1.2.3


From 8cd9c249128a59e8e833d454a784b0cbd338d468 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:42 -0700
Subject: coredump: simplify core_state->nr_threads calculation

Change zap_process() to return int instead of incrementing
mm->core_state->nr_threads directly.  Change zap_threads() to set
mm->core_state only on success.

This patch restores the original size of .text, and more importantly now
->nr_threads is used in two places only.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 50de3aaff4d..c74bb34eeef 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1502,9 +1502,10 @@ out:
 	return ispipe;
 }
 
-static void zap_process(struct task_struct *start)
+static int zap_process(struct task_struct *start)
 {
 	struct task_struct *t;
+	int nr = 0;
 
 	start->signal->flags = SIGNAL_GROUP_EXIT;
 	start->signal->group_stop_count = 0;
@@ -1512,31 +1513,33 @@ static void zap_process(struct task_struct *start)
 	t = start;
 	do {
 		if (t != current && t->mm) {
-			t->mm->core_state->nr_threads++;
 			sigaddset(&t->pending.signal, SIGKILL);
 			signal_wake_up(t, 1);
+			nr++;
 		}
 	} while_each_thread(start, t);
+
+	return nr;
 }
 
 static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
-				int exit_code)
+				struct core_state *core_state, int exit_code)
 {
 	struct task_struct *g, *p;
 	unsigned long flags;
-	int err = -EAGAIN;
+	int nr = -EAGAIN;
 
 	spin_lock_irq(&tsk->sighand->siglock);
 	if (!signal_group_exit(tsk->signal)) {
+		mm->core_state = core_state;
 		tsk->signal->group_exit_code = exit_code;
-		zap_process(tsk);
-		err = 0;
+		nr = zap_process(tsk);
 	}
 	spin_unlock_irq(&tsk->sighand->siglock);
-	if (err)
-		return err;
+	if (unlikely(nr < 0))
+		return nr;
 
-	if (atomic_read(&mm->mm_users) == mm->core_state->nr_threads + 1)
+	if (atomic_read(&mm->mm_users) == nr + 1)
 		goto done;
 	/*
 	 * We should find and kill all tasks which use this mm, and we should
@@ -1579,7 +1582,7 @@ static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
 			if (p->mm) {
 				if (unlikely(p->mm == mm)) {
 					lock_task_sighand(p, &flags);
-					zap_process(p);
+					nr += zap_process(p);
 					unlock_task_sighand(p, &flags);
 				}
 				break;
@@ -1588,7 +1591,8 @@ static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
 	}
 	rcu_read_unlock();
 done:
-	return mm->core_state->nr_threads;
+	core_state->nr_threads = nr;
+	return nr;
 }
 
 static int coredump_wait(int exit_code)
@@ -1601,12 +1605,7 @@ static int coredump_wait(int exit_code)
 
 	init_completion(&mm->core_done);
 	init_completion(&core_state.startup);
-	core_state.nr_threads = 0;
-	mm->core_state = &core_state;
-
-	core_waiters = zap_threads(tsk, mm, exit_code);
-	if (core_waiters < 0)
-		mm->core_state = NULL;
+	core_waiters = zap_threads(tsk, mm, &core_state, exit_code);
 	up_write(&mm->mmap_sem);
 
 	if (unlikely(core_waiters < 0))
-- 
cgit v1.2.3


From c5f1cc8c1828486a61ab3e575da6e2c62b34d399 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:42 -0700
Subject: coredump: turn core_state->nr_threads into atomic_t

Turn core_state->nr_threads into atomic_t and kill now unneeded
down_write(&mm->mmap_sem) in exit_mm().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c                | 2 +-
 include/linux/mm_types.h | 2 +-
 kernel/exit.c            | 5 ++---
 3 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index c74bb34eeef..15d493fe8aa 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1591,7 +1591,7 @@ static inline int zap_threads(struct task_struct *tsk, struct mm_struct *mm,
 	}
 	rcu_read_unlock();
 done:
-	core_state->nr_threads = nr;
+	atomic_set(&core_state->nr_threads, nr);
 	return nr;
 }
 
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index c0b1747b61a..ae99a28ba6a 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -160,7 +160,7 @@ struct vm_area_struct {
 };
 
 struct core_state {
-	int nr_threads;
+	atomic_t nr_threads;
 	struct completion startup;
 };
 
diff --git a/kernel/exit.c b/kernel/exit.c
index 988e232254e..63d82957baa 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -678,10 +678,9 @@ static void exit_mm(struct task_struct * tsk)
 	down_read(&mm->mmap_sem);
 	if (mm->core_state) {
 		up_read(&mm->mmap_sem);
-		down_write(&mm->mmap_sem);
-		if (!--mm->core_state->nr_threads)
+
+		if (atomic_dec_and_test(&mm->core_state->nr_threads))
 			complete(&mm->core_state->startup);
-		up_write(&mm->mmap_sem);
 
 		wait_for_completion(&mm->core_done);
 		down_read(&mm->mmap_sem);
-- 
cgit v1.2.3


From 9d5b327bf198d2720666de958dcc2ae219d86952 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:43 -0700
Subject: coredump: make mm->core_state visible to ->core_dump()

Move the "struct core_state core_state" from coredump_wait() to
do_coredump(), this makes mm->core_state visible to binfmt->core_dump().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 15d493fe8aa..b8ee842d93c 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1595,17 +1595,16 @@ done:
 	return nr;
 }
 
-static int coredump_wait(int exit_code)
+static int coredump_wait(int exit_code, struct core_state *core_state)
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	struct core_state core_state;
 	struct completion *vfork_done;
 	int core_waiters;
 
 	init_completion(&mm->core_done);
-	init_completion(&core_state.startup);
-	core_waiters = zap_threads(tsk, mm, &core_state, exit_code);
+	init_completion(&core_state->startup);
+	core_waiters = zap_threads(tsk, mm, core_state, exit_code);
 	up_write(&mm->mmap_sem);
 
 	if (unlikely(core_waiters < 0))
@@ -1622,8 +1621,7 @@ static int coredump_wait(int exit_code)
 	}
 
 	if (core_waiters)
-		wait_for_completion(&core_state.startup);
-	mm->core_state = NULL;
+		wait_for_completion(&core_state->startup);
 fail:
 	return core_waiters;
 }
@@ -1679,6 +1677,7 @@ int get_dumpable(struct mm_struct *mm)
 
 int do_coredump(long signr, int exit_code, struct pt_regs * regs)
 {
+	struct core_state core_state;
 	char corename[CORENAME_MAX_SIZE + 1];
 	struct mm_struct *mm = current->mm;
 	struct linux_binfmt * binfmt;
@@ -1717,7 +1716,7 @@ int do_coredump(long signr, int exit_code, struct pt_regs * regs)
 		current->fsuid = 0;	/* Dump root private */
 	}
 
-	retval = coredump_wait(exit_code);
+	retval = coredump_wait(exit_code, &core_state);
 	if (retval < 0)
 		goto fail;
 
@@ -1812,6 +1811,7 @@ fail_unlock:
 
 	current->fsuid = fsuid;
 	complete_all(&mm->core_done);
+	mm->core_state = NULL;
 fail:
 	return retval;
 }
-- 
cgit v1.2.3


From b564daf806d492dd4f7afe9b6c83b8d35d137669 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:44 -0700
Subject: coredump: construct the list of coredumping threads at startup time

binfmt->core_dump() has to iterate over the all threads in system in order
to find the coredumping threads and construct the list using the
GFP_ATOMIC allocations.

With this patch each thread allocates the list node on exit_mm()'s stack and
adds itself to the list.

This allows us to do further changes:

	- simplify ->core_dump()

	- change exit_mm() to clear ->mm first, then wait for ->core_done.
	  this makes the coredumping process visible to oom_kill

	- kill mm->core_done

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c                |  2 ++
 include/linux/mm_types.h |  6 ++++++
 kernel/exit.c            | 15 ++++++++++++---
 3 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index b8ee842d93c..fe2873b8037 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1604,6 +1604,8 @@ static int coredump_wait(int exit_code, struct core_state *core_state)
 
 	init_completion(&mm->core_done);
 	init_completion(&core_state->startup);
+	core_state->dumper.task = tsk;
+	core_state->dumper.next = NULL;
 	core_waiters = zap_threads(tsk, mm, core_state, exit_code);
 	up_write(&mm->mmap_sem);
 
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index ae99a28ba6a..4d0d0abc79f 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -159,8 +159,14 @@ struct vm_area_struct {
 #endif
 };
 
+struct core_thread {
+	struct task_struct *task;
+	struct core_thread *next;
+};
+
 struct core_state {
 	atomic_t nr_threads;
+	struct core_thread dumper;
 	struct completion startup;
 };
 
diff --git a/kernel/exit.c b/kernel/exit.c
index 63d82957baa..b66f0d55c79 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -664,6 +664,7 @@ assign_new_owner:
 static void exit_mm(struct task_struct * tsk)
 {
 	struct mm_struct *mm = tsk->mm;
+	struct core_state *core_state;
 
 	mm_release(tsk, mm);
 	if (!mm)
@@ -676,11 +677,19 @@ static void exit_mm(struct task_struct * tsk)
 	 * group with ->mm != NULL.
 	 */
 	down_read(&mm->mmap_sem);
-	if (mm->core_state) {
+	core_state = mm->core_state;
+	if (core_state) {
+		struct core_thread self;
 		up_read(&mm->mmap_sem);
 
-		if (atomic_dec_and_test(&mm->core_state->nr_threads))
-			complete(&mm->core_state->startup);
+		self.task = tsk;
+		self.next = xchg(&core_state->dumper.next, &self);
+		/*
+		 * Implies mb(), the result of xchg() must be visible
+		 * to core_state->dumper.
+		 */
+		if (atomic_dec_and_test(&core_state->nr_threads))
+			complete(&core_state->startup);
 
 		wait_for_completion(&mm->core_done);
 		down_read(&mm->mmap_sem);
-- 
cgit v1.2.3


From 83914441f94c6f2cd468ca97365f6c34f418706e Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:45 -0700
Subject: coredump: elf_core_dump: use core_state->dumper list

Kill the nasty rcu_read_lock() + do_each_thread() loop, use the list
encoded in mm->core_state instead, s/GFP_ATOMIC/GFP_KERNEL/.

This patch allows futher cleanups in binfmt_elf.c, in particular we can
kill the parallel info->threads list.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/binfmt_elf.c | 77 ++++++++++++++++++++++++---------------------------------
 1 file changed, 32 insertions(+), 45 deletions(-)

diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index bad7d8770d7..88d180306cf 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1478,7 +1478,7 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 	const struct user_regset_view *view = task_user_regset_view(dump_task);
 	struct elf_thread_core_info *t;
 	struct elf_prpsinfo *psinfo;
-	struct task_struct *g, *p;
+	struct core_thread *ct;
 	unsigned int i;
 
 	info->size = 0;
@@ -1517,34 +1517,26 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 	/*
 	 * Allocate a structure for each thread.
 	 */
-	rcu_read_lock();
-	do_each_thread(g, p)
-		if (p->mm == dump_task->mm) {
-			if (p->flags & PF_KTHREAD)
-				continue;
-
-			t = kzalloc(offsetof(struct elf_thread_core_info,
-					     notes[info->thread_notes]),
-				    GFP_ATOMIC);
-			if (unlikely(!t)) {
-				rcu_read_unlock();
-				return 0;
-			}
-			t->task = p;
-			if (p == dump_task || !info->thread) {
-				t->next = info->thread;
-				info->thread = t;
-			} else {
-				/*
-				 * Make sure to keep the original task at
-				 * the head of the list.
-				 */
-				t->next = info->thread->next;
-				info->thread->next = t;
-			}
+	for (ct = &dump_task->mm->core_state->dumper; ct; ct = ct->next) {
+		t = kzalloc(offsetof(struct elf_thread_core_info,
+				     notes[info->thread_notes]),
+			    GFP_KERNEL);
+		if (unlikely(!t))
+			return 0;
+
+		t->task = ct->task;
+		if (ct->task == dump_task || !info->thread) {
+			t->next = info->thread;
+			info->thread = t;
+		} else {
+			/*
+			 * Make sure to keep the original task at
+			 * the head of the list.
+			 */
+			t->next = info->thread->next;
+			info->thread->next = t;
 		}
-	while_each_thread(g, p);
-	rcu_read_unlock();
+	}
 
 	/*
 	 * Now fill in each thread's information.
@@ -1691,7 +1683,6 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 {
 #define	NUM_NOTES	6
 	struct list_head *t;
-	struct task_struct *g, *p;
 
 	info->notes = NULL;
 	info->prstatus = NULL;
@@ -1723,23 +1714,19 @@ static int fill_note_info(struct elfhdr *elf, int phdrs,
 
 	info->thread_status_size = 0;
 	if (signr) {
+		struct core_thread *ct;
 		struct elf_thread_status *ets;
-		rcu_read_lock();
-		do_each_thread(g, p)
-			if (current->mm == p->mm && current != p) {
-				if (p->flags & PF_KTHREAD)
-					continue;
-
-				ets = kzalloc(sizeof(*ets), GFP_ATOMIC);
-				if (!ets) {
-					rcu_read_unlock();
-					return 0;
-				}
-				ets->thread = p;
-				list_add(&ets->list, &info->thread_list);
-			}
-		while_each_thread(g, p);
-		rcu_read_unlock();
+
+		for (ct = current->mm->core_state->dumper.next;
+						ct; ct = ct->next) {
+			ets = kzalloc(sizeof(*ets), GFP_KERNEL);
+			if (!ets)
+				return 0;
+
+			ets->thread = ct->task;
+			list_add(&ets->list, &info->thread_list);
+		}
+
 		list_for_each(t, &info->thread_list) {
 			int sz;
 
-- 
cgit v1.2.3


From 182c515fd2a942623aed4e4e0e0b37fe96571b05 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:45 -0700
Subject: coredump: elf_fdpic_core_dump: use core_state->dumper list

Kill the nasty rcu_read_lock() + do_each_thread() loop, use the list
encoded in mm->core_state instead, s/GFP_ATOMIC/GFP_KERNEL/.

This patch allows futher cleanups in binfmt_elf_fdpic.c.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/binfmt_elf_fdpic.c | 29 ++++++++++++-----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 71bcc4b4d08..1b59b1edf26 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1573,7 +1573,6 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs,
 	struct memelfnote *notes = NULL;
 	struct elf_prstatus *prstatus = NULL;	/* NT_PRSTATUS */
 	struct elf_prpsinfo *psinfo = NULL;	/* NT_PRPSINFO */
- 	struct task_struct *g, *p;
  	LIST_HEAD(thread_list);
  	struct list_head *t;
 	elf_fpregset_t *fpu = NULL;
@@ -1622,23 +1621,19 @@ static int elf_fdpic_core_dump(long signr, struct pt_regs *regs,
 #endif
 
 	if (signr) {
+		struct core_thread *ct;
 		struct elf_thread_status *tmp;
-		rcu_read_lock();
-		do_each_thread(g,p)
-			if (current->mm == p->mm && current != p) {
-				if (p->flags & PF_KTHREAD)
-					continue;
-
-				tmp = kzalloc(sizeof(*tmp), GFP_ATOMIC);
-				if (!tmp) {
-					rcu_read_unlock();
-					goto cleanup;
-				}
-				tmp->thread = p;
-				list_add(&tmp->list, &thread_list);
-			}
-		while_each_thread(g,p);
-		rcu_read_unlock();
+
+		for (ct = current->mm->core_state->dumper.next;
+						ct; ct = ct->next) {
+			tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
+			if (!tmp)
+				goto cleanup;
+
+			tmp->thread = ct->task;
+			list_add(&tmp->list, &thread_list);
+		}
+
 		list_for_each(t, &thread_list) {
 			struct elf_thread_status *tmp;
 			int sz;
-- 
cgit v1.2.3


From a94e2d408eaedbd85aae259621d46fafc10479a2 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:46 -0700
Subject: coredump: kill mm->core_done

Now that we have core_state->dumper list we can use it to wake up the
sub-threads waiting for the coredump completion.

This uglifies the code and .text grows by 47 bytes, but otoh mm_struct
lessens by sizeof(struct completion).  Also, with this change we can
decouple exit_mm() from the coredumping code.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c                | 25 ++++++++++++++++++++++---
 include/linux/mm_types.h |  4 +---
 kernel/exit.c            |  8 +++++++-
 3 files changed, 30 insertions(+), 7 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index fe2873b8037..bff43aeb235 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1602,7 +1602,6 @@ static int coredump_wait(int exit_code, struct core_state *core_state)
 	struct completion *vfork_done;
 	int core_waiters;
 
-	init_completion(&mm->core_done);
 	init_completion(&core_state->startup);
 	core_state->dumper.task = tsk;
 	core_state->dumper.next = NULL;
@@ -1628,6 +1627,27 @@ fail:
 	return core_waiters;
 }
 
+static void coredump_finish(struct mm_struct *mm)
+{
+	struct core_thread *curr, *next;
+	struct task_struct *task;
+
+	next = mm->core_state->dumper.next;
+	while ((curr = next) != NULL) {
+		next = curr->next;
+		task = curr->task;
+		/*
+		 * see exit_mm(), curr->task must not see
+		 * ->task == NULL before we read ->next.
+		 */
+		smp_mb();
+		curr->task = NULL;
+		wake_up_process(task);
+	}
+
+	mm->core_state = NULL;
+}
+
 /*
  * set_dumpable converts traditional three-value dumpable to two flags and
  * stores them into mm->flags.  It modifies lower two bits of mm->flags, but
@@ -1812,8 +1832,7 @@ fail_unlock:
 		argv_free(helper_argv);
 
 	current->fsuid = fsuid;
-	complete_all(&mm->core_done);
-	mm->core_state = NULL;
+	coredump_finish(mm);
 fail:
 	return retval;
 }
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 4d0d0abc79f..746f975b58e 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -229,9 +229,7 @@ struct mm_struct {
 
 	unsigned long flags; /* Must use atomic bitops to access the bits */
 
-	/* coredumping support */
-	struct core_state *core_state;
-	struct completion core_done;
+	struct core_state *core_state; /* coredumping support */
 
 	/* aio bits */
 	rwlock_t		ioctx_list_lock;	/* aio lock */
diff --git a/kernel/exit.c b/kernel/exit.c
index b66f0d55c79..8a4d4d12e29 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -691,7 +691,13 @@ static void exit_mm(struct task_struct * tsk)
 		if (atomic_dec_and_test(&core_state->nr_threads))
 			complete(&core_state->startup);
 
-		wait_for_completion(&mm->core_done);
+		for (;;) {
+			set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+			if (!self.task) /* see coredump_finish() */
+				break;
+			schedule();
+		}
+		__set_task_state(tsk, TASK_RUNNING);
 		down_read(&mm->mmap_sem);
 	}
 	atomic_inc(&mm->mm_count);
-- 
cgit v1.2.3


From 565b9b14e7f48131bca58840aa404bbef058fa89 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:47 -0700
Subject: coredump: format_corename: fix the "core_uses_pid" logic

I don't understand why the multi-thread coredump implies the core_uses_pid
behaviour, but we shouldn't use mm->mm_users for that.  This counter can
be incremented by get_task_mm().  Use the valued returned by
coredump_wait() instead.

Also, remove the "const char *pattern" argument, format_corename() can use
core_pattern directly.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index bff43aeb235..5e559013e30 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1379,17 +1379,14 @@ EXPORT_SYMBOL(set_binfmt);
  * name into corename, which must have space for at least
  * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator.
  */
-static int format_corename(char *corename, const char *pattern, long signr)
+static int format_corename(char *corename, int nr_threads, long signr)
 {
-	const char *pat_ptr = pattern;
+	const char *pat_ptr = core_pattern;
+	int ispipe = (*pat_ptr == '|');
 	char *out_ptr = corename;
 	char *const out_end = corename + CORENAME_MAX_SIZE;
 	int rc;
 	int pid_in_pattern = 0;
-	int ispipe = 0;
-
-	if (*pattern == '|')
-		ispipe = 1;
 
 	/* Repeat as long as we have more pattern to process and more output
 	   space */
@@ -1490,7 +1487,7 @@ static int format_corename(char *corename, const char *pattern, long signr)
 	 * and core_uses_pid is set, then .%pid will be appended to
 	 * the filename. Do not do this for piped commands. */
 	if (!ispipe && !pid_in_pattern
-            && (core_uses_pid || atomic_read(&current->mm->mm_users) != 1)) {
+	    && (core_uses_pid || nr_threads)) {
 		rc = snprintf(out_ptr, out_end - out_ptr,
 			      ".%d", task_tgid_vnr(current));
 		if (rc > out_end - out_ptr)
@@ -1753,7 +1750,7 @@ int do_coredump(long signr, int exit_code, struct pt_regs * regs)
 	 * uses lock_kernel()
 	 */
  	lock_kernel();
-	ispipe = format_corename(corename, core_pattern, signr);
+	ispipe = format_corename(corename, retval, signr);
 	unlock_kernel();
 	/*
 	 * Don't bother to check the RLIMIT_CORE value if core_pattern points
-- 
cgit v1.2.3


From 1a4d9b0aa0d3c50314e57525a5e5ec2cfc48b4c8 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:47 -0700
Subject: workqueues: insert_work: use "list_head *" instead of "int tail"

insert_work() inserts the new work_struct before or after cwq->worklist,
depending on the "int tail" parameter. Change it to accept "list_head *"
instead, this shrinks .text a bit and allows us to insert the barrier
after specific work_struct.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jarek Poplawski <jarkao2@gmail.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/workqueue.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 6fd158b2102..d9a2d65cc63 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -125,7 +125,7 @@ struct cpu_workqueue_struct *get_wq_data(struct work_struct *work)
 }
 
 static void insert_work(struct cpu_workqueue_struct *cwq,
-				struct work_struct *work, int tail)
+			struct work_struct *work, struct list_head *head)
 {
 	set_wq_data(work, cwq);
 	/*
@@ -133,10 +133,7 @@ static void insert_work(struct cpu_workqueue_struct *cwq,
 	 * result of list_add() below, see try_to_grab_pending().
 	 */
 	smp_wmb();
-	if (tail)
-		list_add_tail(&work->entry, &cwq->worklist);
-	else
-		list_add(&work->entry, &cwq->worklist);
+	list_add_tail(&work->entry, head);
 	wake_up(&cwq->more_work);
 }
 
@@ -146,7 +143,7 @@ static void __queue_work(struct cpu_workqueue_struct *cwq,
 	unsigned long flags;
 
 	spin_lock_irqsave(&cwq->lock, flags);
-	insert_work(cwq, work, 1);
+	insert_work(cwq, work, &cwq->worklist);
 	spin_unlock_irqrestore(&cwq->lock, flags);
 }
 
@@ -361,14 +358,14 @@ static void wq_barrier_func(struct work_struct *work)
 }
 
 static void insert_wq_barrier(struct cpu_workqueue_struct *cwq,
-					struct wq_barrier *barr, int tail)
+			struct wq_barrier *barr, struct list_head *head)
 {
 	INIT_WORK(&barr->work, wq_barrier_func);
 	__set_bit(WORK_STRUCT_PENDING, work_data_bits(&barr->work));
 
 	init_completion(&barr->done);
 
-	insert_work(cwq, &barr->work, tail);
+	insert_work(cwq, &barr->work, head);
 }
 
 static int flush_cpu_workqueue(struct cpu_workqueue_struct *cwq)
@@ -388,7 +385,7 @@ static int flush_cpu_workqueue(struct cpu_workqueue_struct *cwq)
 		active = 0;
 		spin_lock_irq(&cwq->lock);
 		if (!list_empty(&cwq->worklist) || cwq->current_work != NULL) {
-			insert_wq_barrier(cwq, &barr, 1);
+			insert_wq_barrier(cwq, &barr, &cwq->worklist);
 			active = 1;
 		}
 		spin_unlock_irq(&cwq->lock);
@@ -473,7 +470,7 @@ static void wait_on_cpu_work(struct cpu_workqueue_struct *cwq,
 
 	spin_lock_irq(&cwq->lock);
 	if (unlikely(cwq->current_work == work)) {
-		insert_wq_barrier(cwq, &barr, 0);
+		insert_wq_barrier(cwq, &barr, cwq->worklist.next);
 		running = 1;
 	}
 	spin_unlock_irq(&cwq->lock);
-- 
cgit v1.2.3


From db700897224b5ebdf852f2d38920ce428940d059 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:49 -0700
Subject: workqueues: implement flush_work()

Most of users of flush_workqueue() can be changed to use cancel_work_sync(),
but sometimes we really need to wait for the completion and cancelling is not
an option. schedule_on_each_cpu() is good example.

Add the new helper, flush_work(work), which waits for the completion of the
specific work_struct. More precisely, it "flushes" the result of of the last
queue_work() which is visible to the caller.

For example, this code

	queue_work(wq, work);
	/* WINDOW */
	queue_work(wq, work);

	flush_work(work);

doesn't necessary work "as expected". What can happen in the WINDOW above is

	- wq starts the execution of work->func()

	- the caller migrates to another CPU

now, after the 2nd queue_work() this work is active on the previous CPU, and
at the same time it is queued on another. In this case flush_work(work) may
return before the first work->func() completes.

It is trivial to add another helper

	int flush_work_sync(struct work_struct *work)
	{
		return flush_work(work) || wait_on_work(work);
	}

which works "more correctly", but it has to iterate over all CPUs and thus
it much slower than flush_work().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Max Krasnyansky <maxk@qualcomm.com>
Acked-by: Jarek Poplawski <jarkao2@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/workqueue.h |  2 ++
 kernel/workqueue.c        | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+)

diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 14d47120682..5c158c477ac 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -201,6 +201,8 @@ extern int keventd_up(void);
 extern void init_workqueues(void);
 int execute_in_process_context(work_func_t fn, struct execute_work *);
 
+extern int flush_work(struct work_struct *work);
+
 extern int cancel_work_sync(struct work_struct *work);
 
 /*
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index d9a2d65cc63..ee41cf857d5 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -423,6 +423,52 @@ void flush_workqueue(struct workqueue_struct *wq)
 }
 EXPORT_SYMBOL_GPL(flush_workqueue);
 
+/**
+ * flush_work - block until a work_struct's callback has terminated
+ * @work: the work which is to be flushed
+ *
+ * It is expected that, prior to calling flush_work(), the caller has
+ * arranged for the work to not be requeued, otherwise it doesn't make
+ * sense to use this function.
+ */
+int flush_work(struct work_struct *work)
+{
+	struct cpu_workqueue_struct *cwq;
+	struct list_head *prev;
+	struct wq_barrier barr;
+
+	might_sleep();
+	cwq = get_wq_data(work);
+	if (!cwq)
+		return 0;
+
+	prev = NULL;
+	spin_lock_irq(&cwq->lock);
+	if (!list_empty(&work->entry)) {
+		/*
+		 * See the comment near try_to_grab_pending()->smp_rmb().
+		 * If it was re-queued under us we are not going to wait.
+		 */
+		smp_rmb();
+		if (unlikely(cwq != get_wq_data(work)))
+			goto out;
+		prev = &work->entry;
+	} else {
+		if (cwq->current_work != work)
+			goto out;
+		prev = &cwq->worklist;
+	}
+	insert_wq_barrier(cwq, &barr, prev->next);
+out:
+	spin_unlock_irq(&cwq->lock);
+	if (!prev)
+		return 0;
+
+	wait_for_completion(&barr.done);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(flush_work);
+
 /*
  * Upon a successful return (>= 0), the caller "owns" WORK_STRUCT_PENDING bit,
  * so this work can't be re-armed in any way.
-- 
cgit v1.2.3


From 8616a89ab761239c963eea3a63be383f127cc7e8 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:49 -0700
Subject: workqueues: schedule_on_each_cpu: use flush_work()

Change schedule_on_each_cpu() to use flush_work() instead of
flush_workqueue(), this way we don't wait for other work_struct's which
can be queued meanwhile.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jarek Poplawski <jarkao2@gmail.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/workqueue.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index ee41cf857d5..5fbffd302eb 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -690,7 +690,8 @@ int schedule_on_each_cpu(work_func_t func)
 		set_bit(WORK_STRUCT_PENDING, work_data_bits(work));
 		__queue_work(per_cpu_ptr(keventd_wq->cpu_wq, cpu), work);
 	}
-	flush_workqueue(keventd_wq);
+	for_each_online_cpu(cpu)
+		flush_work(per_cpu_ptr(works, cpu));
 	put_online_cpus();
 	free_percpu(works);
 	return 0;
-- 
cgit v1.2.3


From 3da1c84c00c7e5fa8348336bd8c342f9128b0f14 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:50 -0700
Subject: workqueues: make get_online_cpus() useable for work->func()

workqueue_cpu_callback(CPU_DEAD) flushes cwq->thread under
cpu_maps_update_begin().  This means that the multithreaded workqueues
can't use get_online_cpus() due to the possible deadlock, very bad and
very old problem.

Introduce the new state, CPU_POST_DEAD, which is called after
cpu_hotplug_done() but before cpu_maps_update_done().

Change workqueue_cpu_callback() to use CPU_POST_DEAD instead of CPU_DEAD.
This means that create/destroy functions can't rely on get_online_cpus()
any longer and should take cpu_add_remove_lock instead.

[akpm@linux-foundation.org: fix CONFIG_SMP=n]
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/cpu.h      | 15 +++++++++++----
 include/linux/notifier.h |  2 ++
 kernel/cpu.c             |  5 +++++
 kernel/workqueue.c       | 18 +++++++++---------
 4 files changed, 27 insertions(+), 13 deletions(-)

diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 7464ba3b433..d7faf880849 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -69,10 +69,11 @@ static inline void unregister_cpu_notifier(struct notifier_block *nb)
 #endif
 
 int cpu_up(unsigned int cpu);
-
 extern void cpu_hotplug_init(void);
+extern void cpu_maps_update_begin(void);
+extern void cpu_maps_update_done(void);
 
-#else
+#else	/* CONFIG_SMP */
 
 static inline int register_cpu_notifier(struct notifier_block *nb)
 {
@@ -87,10 +88,16 @@ static inline void cpu_hotplug_init(void)
 {
 }
 
+static inline void cpu_maps_update_begin(void)
+{
+}
+
+static inline void cpu_maps_update_done(void)
+{
+}
+
 #endif /* CONFIG_SMP */
 extern struct sysdev_class cpu_sysdev_class;
-extern void cpu_maps_update_begin(void);
-extern void cpu_maps_update_done(void);
 
 #ifdef CONFIG_HOTPLUG_CPU
 /* Stop CPUs going up and down. */
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index bd3d72ddf33..da2698b0fdd 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -214,6 +214,8 @@ static inline int notifier_to_errno(int ret)
 #define CPU_DEAD		0x0007 /* CPU (unsigned)v dead */
 #define CPU_DYING		0x0008 /* CPU (unsigned)v not running any task,
 				        * not handling interrupts, soon dead */
+#define CPU_POST_DEAD		0x0009 /* CPU (unsigned)v dead, cpu_hotplug
+					* lock is dropped */
 
 /* Used for CPU hotplug events occuring while tasks are frozen due to a suspend
  * operation in progress
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 2cc409ce0a8..10ba5f1004a 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -285,6 +285,11 @@ out_allowed:
 	set_cpus_allowed_ptr(current, &old_allowed);
 out_release:
 	cpu_hotplug_done();
+	if (!err) {
+		if (raw_notifier_call_chain(&cpu_chain, CPU_POST_DEAD | mod,
+					    hcpu) == NOTIFY_BAD)
+			BUG();
+	}
 	return err;
 }
 
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 5fbffd302eb..828e58230cb 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -828,7 +828,7 @@ struct workqueue_struct *__create_workqueue_key(const char *name,
 		err = create_workqueue_thread(cwq, singlethread_cpu);
 		start_workqueue_thread(cwq, -1);
 	} else {
-		get_online_cpus();
+		cpu_maps_update_begin();
 		spin_lock(&workqueue_lock);
 		list_add(&wq->list, &workqueues);
 		spin_unlock(&workqueue_lock);
@@ -840,7 +840,7 @@ struct workqueue_struct *__create_workqueue_key(const char *name,
 			err = create_workqueue_thread(cwq, cpu);
 			start_workqueue_thread(cwq, cpu);
 		}
-		put_online_cpus();
+		cpu_maps_update_done();
 	}
 
 	if (err) {
@@ -854,8 +854,8 @@ EXPORT_SYMBOL_GPL(__create_workqueue_key);
 static void cleanup_workqueue_thread(struct cpu_workqueue_struct *cwq)
 {
 	/*
-	 * Our caller is either destroy_workqueue() or CPU_DEAD,
-	 * get_online_cpus() protects cwq->thread.
+	 * Our caller is either destroy_workqueue() or CPU_POST_DEAD,
+	 * cpu_add_remove_lock protects cwq->thread.
 	 */
 	if (cwq->thread == NULL)
 		return;
@@ -865,7 +865,7 @@ static void cleanup_workqueue_thread(struct cpu_workqueue_struct *cwq)
 
 	flush_cpu_workqueue(cwq);
 	/*
-	 * If the caller is CPU_DEAD and cwq->worklist was not empty,
+	 * If the caller is CPU_POST_DEAD and cwq->worklist was not empty,
 	 * a concurrent flush_workqueue() can insert a barrier after us.
 	 * However, in that case run_workqueue() won't return and check
 	 * kthread_should_stop() until it flushes all work_struct's.
@@ -889,14 +889,14 @@ void destroy_workqueue(struct workqueue_struct *wq)
 	const cpumask_t *cpu_map = wq_cpu_map(wq);
 	int cpu;
 
-	get_online_cpus();
+	cpu_maps_update_begin();
 	spin_lock(&workqueue_lock);
 	list_del(&wq->list);
 	spin_unlock(&workqueue_lock);
 
 	for_each_cpu_mask_nr(cpu, *cpu_map)
 		cleanup_workqueue_thread(per_cpu_ptr(wq->cpu_wq, cpu));
-	put_online_cpus();
+ 	cpu_maps_update_done();
 
 	free_percpu(wq->cpu_wq);
 	kfree(wq);
@@ -935,7 +935,7 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 
 		case CPU_UP_CANCELED:
 			start_workqueue_thread(cwq, -1);
-		case CPU_DEAD:
+		case CPU_POST_DEAD:
 			cleanup_workqueue_thread(cwq);
 			break;
 		}
@@ -943,7 +943,7 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 
 	switch (action) {
 	case CPU_UP_CANCELED:
-	case CPU_DEAD:
+	case CPU_POST_DEAD:
 		cpu_clear(cpu, cpu_populated_map);
 	}
 
-- 
cgit v1.2.3


From 69b895fd13d73aebf62b75502eb6513d43057ba3 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:51 -0700
Subject: S390 topology: don't use kthread() for arch_reinit_sched_domains()

Now that it is safe to use get_online_cpus() we can revert

	[S390] cpu topology: Fix possible deadlock.
	commit: fd781fa25c9e9c6fd1599df060b05e7c4ad724e5

and call arch_reinit_sched_domains() directly from topology_work_fn().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/s390/kernel/topology.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 212d618b009..632b13e1005 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -9,7 +9,6 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/sched.h>
-#include <linux/kthread.h>
 #include <linux/workqueue.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
@@ -230,20 +229,9 @@ void arch_update_cpu_topology(void)
 	}
 }
 
-static int topology_kthread(void *data)
-{
-	arch_reinit_sched_domains();
-	return 0;
-}
-
 static void topology_work_fn(struct work_struct *work)
 {
-	/* We can't call arch_reinit_sched_domains() from a multi-threaded
-	 * workqueue context since it may deadlock in case of cpu hotplug.
-	 * So we have to create a kernel thread in order to call
-	 * arch_reinit_sched_domains().
-	 */
-	kthread_run(topology_kthread, NULL, "topology_update");
+	arch_reinit_sched_domains();
 }
 
 void topology_schedule_update(void)
-- 
cgit v1.2.3


From a67da70dc0955580665f5444f318b92e69a3c272 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:52 -0700
Subject: workqueues: lockdep annotations for flush_work()

Add lockdep annotations to flush_work() and update the comment.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jarek Poplawski <jarkao2@o2.pl>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/workqueue.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 828e58230cb..4fcb75b9844 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -427,6 +427,8 @@ EXPORT_SYMBOL_GPL(flush_workqueue);
  * flush_work - block until a work_struct's callback has terminated
  * @work: the work which is to be flushed
  *
+ * Returns false if @work has already terminated.
+ *
  * It is expected that, prior to calling flush_work(), the caller has
  * arranged for the work to not be requeued, otherwise it doesn't make
  * sense to use this function.
@@ -442,6 +444,9 @@ int flush_work(struct work_struct *work)
 	if (!cwq)
 		return 0;
 
+	lock_acquire(&cwq->wq->lockdep_map, 0, 0, 0, 2, _THIS_IP_);
+	lock_release(&cwq->wq->lockdep_map, 1, _THIS_IP_);
+
 	prev = NULL;
 	spin_lock_irq(&cwq->lock);
 	if (!list_empty(&work->entry)) {
-- 
cgit v1.2.3


From ef1ca236b8d645349ed6569598ae3f6c1b9511c0 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:53 -0700
Subject: workqueues: queue_work() can use queue_work_on()

queue_work() can use queue_work_on() to avoid the code duplication.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/workqueue.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 4fcb75b9844..fe08a8512dd 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -159,14 +159,11 @@ static void __queue_work(struct cpu_workqueue_struct *cwq,
  */
 int queue_work(struct workqueue_struct *wq, struct work_struct *work)
 {
-	int ret = 0;
+	int ret;
+
+	ret = queue_work_on(get_cpu(), wq, work);
+	put_cpu();
 
-	if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
-		BUG_ON(!list_empty(&work->entry));
-		__queue_work(wq_per_cpu(wq, get_cpu()), work);
-		put_cpu();
-		ret = 1;
-	}
 	return ret;
 }
 EXPORT_SYMBOL_GPL(queue_work);
-- 
cgit v1.2.3


From 8de6d308bab4f67fcf953562f9f08f9527cad72d Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:53 -0700
Subject: workqueues: schedule_on_each_cpu() can use schedule_work_on()

schedule_on_each_cpu() can use schedule_work_on() to avoid the code
duplication.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/workqueue.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index fe08a8512dd..7cf430372f8 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -689,8 +689,7 @@ int schedule_on_each_cpu(work_func_t func)
 		struct work_struct *work = per_cpu_ptr(works, cpu);
 
 		INIT_WORK(work, func);
-		set_bit(WORK_STRUCT_PENDING, work_data_bits(work));
-		__queue_work(per_cpu_ptr(keventd_wq->cpu_wq, cpu), work);
+		schedule_work_on(cpu, work);
 	}
 	for_each_online_cpu(cpu)
 		flush_work(per_cpu_ptr(works, cpu));
-- 
cgit v1.2.3


From 8448502cfc915f70e3f8923849ade27d472044cb Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Fri, 25 Jul 2008 01:47:54 -0700
Subject: workqueues: do CPU_UP_CANCELED if CPU_UP_PREPARE fails

The bug was pointed out by Akinobu Mita <akinobu.mita@gmail.com>, and this
patch is based on his original patch.

workqueue_cpu_callback(CPU_UP_PREPARE) expects that if it returns
NOTIFY_BAD, _cpu_up() will send CPU_UP_CANCELED then.

However, this is not true since

	"cpu hotplug: cpu: deliver CPU_UP_CANCELED only to NOTIFY_OKed callbacks with CPU_UP_PREPARE"
	commit: a0d8cdb652d35af9319a9e0fb7134de2a276c636

The callback which has returned NOTIFY_BAD will not receive
CPU_UP_CANCELED.  Change the code to fulfil the CPU_UP_CANCELED logic if
CPU_UP_PREPARE fails.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/workqueue.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 7cf430372f8..ec7e4f62aaf 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -911,6 +911,7 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 	unsigned int cpu = (unsigned long)hcpu;
 	struct cpu_workqueue_struct *cwq;
 	struct workqueue_struct *wq;
+	int ret = NOTIFY_OK;
 
 	action &= ~CPU_TASKS_FROZEN;
 
@@ -918,7 +919,7 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 	case CPU_UP_PREPARE:
 		cpu_set(cpu, cpu_populated_map);
 	}
-
+undo:
 	list_for_each_entry(wq, &workqueues, list) {
 		cwq = per_cpu_ptr(wq->cpu_wq, cpu);
 
@@ -928,7 +929,9 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 				break;
 			printk(KERN_ERR "workqueue [%s] for %i failed\n",
 				wq->name, cpu);
-			return NOTIFY_BAD;
+			action = CPU_UP_CANCELED;
+			ret = NOTIFY_BAD;
+			goto undo;
 
 		case CPU_ONLINE:
 			start_workqueue_thread(cwq, cpu);
@@ -948,7 +951,7 @@ static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 		cpu_clear(cpu, cpu_populated_map);
 	}
 
-	return NOTIFY_OK;
+	return ret;
 }
 
 void __init init_workqueues(void)
-- 
cgit v1.2.3


From 95b68dec0d52c7b8fea3698b3938cf3ab936436b Mon Sep 17 00:00:00 2001
From: Chandru <chandru@in.ibm.com>
Date: Fri, 25 Jul 2008 01:47:55 -0700
Subject: calgary iommu: use the first kernels TCE tables in kdump

kdump kernel fails to boot with calgary iommu and aacraid driver on a x366
box.  The ongoing dma's of aacraid from the first kernel continue to exist
until the driver is loaded in the kdump kernel.  Calgary is initialized
prior to aacraid and creation of new tce tables causes wrong dma's to
occur.  Here we try to get the tce tables of the first kernel in kdump
kernel and use them.  While in the kdump kernel we do not allocate new tce
tables but instead read the base address register contents of calgary
iommu and use the tables that the registers point to.  With these changes
the kdump kernel and hence aacraid now boots normally.

Signed-off-by: Chandru Siddalingappa <chandru@in.ibm.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/pci-calgary_64.c | 85 +++++++++++++++++++++++++++++++++++++---
 include/linux/crash_dump.h       |  8 ++++
 2 files changed, 87 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 151f2d171f7..19e7fc7c2c4 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -29,6 +29,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/crash_dump.h>
 #include <linux/dma-mapping.h>
 #include <linux/bitops.h>
 #include <linux/pci_ids.h>
@@ -167,6 +168,8 @@ static void calgary_dump_error_regs(struct iommu_table *tbl);
 static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
 static void calioc2_tce_cache_blast(struct iommu_table *tbl);
 static void calioc2_dump_error_regs(struct iommu_table *tbl);
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl);
+static void get_tce_space_from_tar(void);
 
 static struct cal_chipset_ops calgary_chip_ops = {
 	.handle_quirks = calgary_handle_quirks,
@@ -830,7 +833,11 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)
 
 	tbl = pci_iommu(dev->bus);
 	tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
-	tce_free(tbl, 0, tbl->it_size);
+
+	if (is_kdump_kernel())
+		calgary_init_bitmap_from_tce_table(tbl);
+	else
+		tce_free(tbl, 0, tbl->it_size);
 
 	if (is_calgary(dev->device))
 		tbl->chip_ops = &calgary_chip_ops;
@@ -1209,6 +1216,10 @@ static int __init calgary_init(void)
 	if (ret)
 		return ret;
 
+	/* Purely for kdump kernel case */
+	if (is_kdump_kernel())
+		get_tce_space_from_tar();
+
 	do {
 		dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev);
 		if (!dev)
@@ -1339,6 +1350,61 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev)
 	return (val != 0xffffffff);
 }
 
+/*
+ * calgary_init_bitmap_from_tce_table():
+ * Funtion for kdump case. In the second/kdump kernel initialize
+ * the bitmap based on the tce table entries obtained from first kernel
+ */
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
+{
+	u64 *tp;
+	unsigned int index;
+	tp = ((u64 *)tbl->it_base);
+	for (index = 0 ; index < tbl->it_size; index++) {
+		if (*tp != 0x0)
+			set_bit(index, tbl->it_map);
+		tp++;
+	}
+}
+
+/*
+ * get_tce_space_from_tar():
+ * Function for kdump case. Get the tce tables from first kernel
+ * by reading the contents of the base adress register of calgary iommu
+ */
+static void get_tce_space_from_tar()
+{
+	int bus;
+	void __iomem *target;
+	unsigned long tce_space;
+
+	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
+		struct calgary_bus_info *info = &bus_info[bus];
+		unsigned short pci_device;
+		u32 val;
+
+		val = read_pci_config(bus, 0, 0, 0);
+		pci_device = (val & 0xFFFF0000) >> 16;
+
+		if (!is_cal_pci_dev(pci_device))
+			continue;
+		if (info->translation_disabled)
+			continue;
+
+		if (calgary_bus_has_devices(bus, pci_device) ||
+						translate_empty_slots) {
+			target = calgary_reg(bus_info[bus].bbar,
+						tar_offset(bus));
+			tce_space = be64_to_cpu(readq(target));
+			tce_space = tce_space & TAR_SW_BITS;
+
+			tce_space = tce_space & (~specified_table_size);
+			info->tce_space = (u64 *)__va(tce_space);
+		}
+	}
+	return;
+}
+
 void __init detect_calgary(void)
 {
 	int bus;
@@ -1394,7 +1460,8 @@ void __init detect_calgary(void)
 		return;
 	}
 
-	specified_table_size = determine_tce_table_size(max_pfn * PAGE_SIZE);
+	specified_table_size = determine_tce_table_size((is_kdump_kernel() ?
+					saved_max_pfn : max_pfn) * PAGE_SIZE);
 
 	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
 		struct calgary_bus_info *info = &bus_info[bus];
@@ -1412,10 +1479,16 @@ void __init detect_calgary(void)
 
 		if (calgary_bus_has_devices(bus, pci_device) ||
 		    translate_empty_slots) {
-			tbl = alloc_tce_table();
-			if (!tbl)
-				goto cleanup;
-			info->tce_space = tbl;
+			/*
+			 * If it is kdump kernel, find and use tce tables
+			 * from first kernel, else allocate tce tables here
+			 */
+			if (!is_kdump_kernel()) {
+				tbl = alloc_tce_table();
+				if (!tbl)
+					goto cleanup;
+				info->tce_space = tbl;
+			}
 			calgary_found = 1;
 		}
 	}
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 22c7ac5cd80..6cd39a927e1 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -22,5 +22,13 @@ extern struct proc_dir_entry *proc_vmcore;
 
 #define vmcore_elf_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
 
+static inline int is_kdump_kernel(void)
+{
+	return (elfcorehdr_addr != ELFCORE_ADDR_MAX) ? 1 : 0;
+}
+#else /* !CONFIG_CRASH_DUMP */
+static inline int is_kdump_kernel(void) { return 0; }
 #endif /* CONFIG_CRASH_DUMP */
+
+extern unsigned long saved_max_pfn;
 #endif /* LINUX_CRASHDUMP_H */
-- 
cgit v1.2.3


From 2027d1abc25ff770cc3bc936abd33570ce85d85a Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:47:57 -0700
Subject: idr: change the idr structure

After scalability problems have been detected when using the sysV ipcs, I have
proposed to use an RCU based implementation of the IDR api instead (see
threads http://lkml.org/lkml/2008/4/11/212 and
http://lkml.org/lkml/2008/4/29/295).

This resulted in many people asking to convert the idr API and make it rcu
safe (because most of the code was duplicated and thus unmaintanable and
unreviewable).

So here is a first attempt.

The important change wrt to the idr API itself is during idr removes: idr
layers are freed after a grace period, instead of being moved to the free
list.

The important change wrt to ipcs, is that idr_find() can now be called
locklessly inside a rcu read critical section.

Here are the results I've got for the pmsg test sent by Manfred:

   2.6.25-rc3-mm1   2.6.25-rc3-mm1+   2.6.25-mm1   Patched 2.6.25-mm1
1         1168441           1064021       876000               947488
2         1094264            921059      1549592              1730685
3         2082520           1738165      1694370              2324880
4         2079929           1695521       404553              2400408
5         2898758            406566       391283              3246580
6         2921417            261275       263249              3752148
7         3308761            126056       191742              4243142
8         3329456            100129       141722              4275780

1st column: stock 2.6.25-rc3-mm1
2nd column: 2.6.25-rc3-mm1 + ipc patches (store ipcs into idrs)
3nd column: stock 2.6.25-mm1
4th column: 2.6.25-mm1 + this pacth series.

This patch:

Add an rcu_head to the idr_layer structure in order to free it after a grace
period.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/idr.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/idr.h b/include/linux/idr.h
index 9a2d762124d..1af61d23be3 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/bitops.h>
 #include <linux/init.h>
+#include <linux/rcupdate.h>
 
 #if BITS_PER_LONG == 32
 # define IDR_BITS 5
@@ -51,6 +52,7 @@ struct idr_layer {
 	unsigned long		 bitmap; /* A zero bit means "space here" */
 	struct idr_layer	*ary[1<<IDR_BITS];
 	int			 count;	 /* When zero, we can release it */
+	struct rcu_head		 rcu_head;
 };
 
 struct idr {
-- 
cgit v1.2.3


From 4ae537892ab9858f71c78701f4651ad1ca531a1b Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:47:58 -0700
Subject: idr: rename some of the idr APIs internal routines

This is a trivial patch that renames:

   . alloc_layer to get_from_free_list since it idr_pre_get that actually
     allocates memory.
   . free_layer to move_to_free_list since memory is not actually freed there.

This makes things more clear for the next patches.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/idr.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/lib/idr.c b/lib/idr.c
index 7a02e173f02..8170ace154f 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -35,7 +35,7 @@
 
 static struct kmem_cache *idr_layer_cache;
 
-static struct idr_layer *alloc_layer(struct idr *idp)
+static struct idr_layer *get_from_free_list(struct idr *idp)
 {
 	struct idr_layer *p;
 	unsigned long flags;
@@ -51,14 +51,14 @@ static struct idr_layer *alloc_layer(struct idr *idp)
 }
 
 /* only called when idp->lock is held */
-static void __free_layer(struct idr *idp, struct idr_layer *p)
+static void __move_to_free_list(struct idr *idp, struct idr_layer *p)
 {
 	p->ary[0] = idp->id_free;
 	idp->id_free = p;
 	idp->id_free_cnt++;
 }
 
-static void free_layer(struct idr *idp, struct idr_layer *p)
+static void move_to_free_list(struct idr *idp, struct idr_layer *p)
 {
 	unsigned long flags;
 
@@ -66,7 +66,7 @@ static void free_layer(struct idr *idp, struct idr_layer *p)
 	 * Depends on the return element being zeroed.
 	 */
 	spin_lock_irqsave(&idp->lock, flags);
-	__free_layer(idp, p);
+	__move_to_free_list(idp, p);
 	spin_unlock_irqrestore(&idp->lock, flags);
 }
 
@@ -109,7 +109,7 @@ int idr_pre_get(struct idr *idp, gfp_t gfp_mask)
 		new = kmem_cache_alloc(idr_layer_cache, gfp_mask);
 		if (new == NULL)
 			return (0);
-		free_layer(idp, new);
+		move_to_free_list(idp, new);
 	}
 	return 1;
 }
@@ -167,7 +167,8 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
 		 * Create the layer below if it is missing.
 		 */
 		if (!p->ary[m]) {
-			if (!(new = alloc_layer(idp)))
+			new = get_from_free_list(idp);
+			if (!new)
 				return -1;
 			p->ary[m] = new;
 			p->count++;
@@ -192,7 +193,7 @@ build_up:
 	p = idp->top;
 	layers = idp->layers;
 	if (unlikely(!p)) {
-		if (!(p = alloc_layer(idp)))
+		if (!(p = get_from_free_list(idp)))
 			return -1;
 		layers = 1;
 	}
@@ -204,7 +205,7 @@ build_up:
 		layers++;
 		if (!p->count)
 			continue;
-		if (!(new = alloc_layer(idp))) {
+		if (!(new = get_from_free_list(idp))) {
 			/*
 			 * The allocation failed.  If we built part of
 			 * the structure tear it down.
@@ -214,7 +215,7 @@ build_up:
 				p = p->ary[0];
 				new->ary[0] = NULL;
 				new->bitmap = new->count = 0;
-				__free_layer(idp, new);
+				__move_to_free_list(idp, new);
 			}
 			spin_unlock_irqrestore(&idp->lock, flags);
 			return -1;
@@ -351,7 +352,7 @@ static void sub_remove(struct idr *idp, int shift, int id)
 		__clear_bit(n, &p->bitmap);
 		p->ary[n] = NULL;
 		while(*paa && ! --((**paa)->count)){
-			free_layer(idp, **paa);
+			move_to_free_list(idp, **paa);
 			**paa-- = NULL;
 		}
 		if (!*paa)
@@ -378,12 +379,12 @@ void idr_remove(struct idr *idp, int id)
 
 		p = idp->top->ary[0];
 		idp->top->bitmap = idp->top->count = 0;
-		free_layer(idp, idp->top);
+		move_to_free_list(idp, idp->top);
 		idp->top = p;
 		--idp->layers;
 	}
 	while (idp->id_free_cnt >= IDR_FREE_MAX) {
-		p = alloc_layer(idp);
+		p = get_from_free_list(idp);
 		kmem_cache_free(idr_layer_cache, p);
 	}
 	return;
@@ -426,7 +427,7 @@ void idr_remove_all(struct idr *idp)
 		while (n < fls(id)) {
 			if (p) {
 				memset(p, 0, sizeof *p);
-				free_layer(idp, p);
+				move_to_free_list(idp, p);
 			}
 			n += IDR_BITS;
 			p = *--paa;
@@ -444,7 +445,7 @@ EXPORT_SYMBOL(idr_remove_all);
 void idr_destroy(struct idr *idp)
 {
 	while (idp->id_free_cnt) {
-		struct idr_layer *p = alloc_layer(idp);
+		struct idr_layer *p = get_from_free_list(idp);
 		kmem_cache_free(idr_layer_cache, p);
 	}
 }
@@ -749,7 +750,7 @@ int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
 	 * allocation.
 	 */
 	if (ida->idr.id_free_cnt || ida->free_bitmap) {
-		struct idr_layer *p = alloc_layer(&ida->idr);
+		struct idr_layer *p = get_from_free_list(&ida->idr);
 		if (p)
 			kmem_cache_free(idr_layer_cache, p);
 	}
-- 
cgit v1.2.3


From f098ad655f4dd8e3da98ffbeda9cedcc4459c01a Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:47:59 -0700
Subject: idr: fix a printk call

Fix the incomplete printk call.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/idr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/lib/idr.c b/lib/idr.c
index 8170ace154f..9d905b131ec 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -326,7 +326,8 @@ EXPORT_SYMBOL(idr_get_new);
 
 static void idr_remove_warning(int id)
 {
-	printk("idr_remove called for id=%d which is not allocated.\n", id);
+	printk(KERN_WARNING
+		"idr_remove called for id=%d which is not allocated.\n", id);
 	dump_stack();
 }
 
-- 
cgit v1.2.3


From 944ca05c7b4972f2ebf37262e0f4933d178ad6db Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:47:59 -0700
Subject: idr: error checking factorization

Do some code factorization in the return code analysis.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/idr.h |  6 ++++++
 lib/idr.c           | 30 +++++++++---------------------
 2 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/include/linux/idr.h b/include/linux/idr.h
index 1af61d23be3..762c3f2c631 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -73,6 +73,12 @@ struct idr {
 }
 #define DEFINE_IDR(name)	struct idr name = IDR_INIT(name)
 
+/* Actions to be taken after a call to _idr_sub_alloc */
+#define IDR_NEED_TO_GROW -2
+#define IDR_NOMORE_SPACE -3
+
+#define _idr_rc_to_errno(rc) ((rc) == -1 ? -EAGAIN : -ENOSPC)
+
 /*
  * This is what we export.
  */
diff --git a/lib/idr.c b/lib/idr.c
index 9d905b131ec..80ba06f29d3 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -143,7 +143,7 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
 			/* if already at the top layer, we need to grow */
 			if (!(p = pa[l])) {
 				*starting_id = id;
-				return -2;
+				return IDR_NEED_TO_GROW;
 			}
 
 			/* If we need to go up one layer, continue the
@@ -160,7 +160,7 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
 			id = ((id >> sh) ^ n ^ m) << sh;
 		}
 		if ((id >= MAX_ID_BIT) || (id < 0))
-			return -3;
+			return IDR_NOMORE_SPACE;
 		if (l == 0)
 			break;
 		/*
@@ -229,7 +229,7 @@ build_up:
 	idp->top = p;
 	idp->layers = layers;
 	v = sub_alloc(idp, &id, pa);
-	if (v == -2)
+	if (v == IDR_NEED_TO_GROW)
 		goto build_up;
 	return(v);
 }
@@ -278,12 +278,8 @@ int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
 	 * This is a cheap hack until the IDR code can be fixed to
 	 * return proper error values.
 	 */
-	if (rv < 0) {
-		if (rv == -1)
-			return -EAGAIN;
-		else /* Will be -3 */
-			return -ENOSPC;
-	}
+	if (rv < 0)
+		return _idr_rc_to_errno(rv);
 	*id = rv;
 	return 0;
 }
@@ -313,12 +309,8 @@ int idr_get_new(struct idr *idp, void *ptr, int *id)
 	 * This is a cheap hack until the IDR code can be fixed to
 	 * return proper error values.
 	 */
-	if (rv < 0) {
-		if (rv == -1)
-			return -EAGAIN;
-		else /* Will be -3 */
-			return -ENOSPC;
-	}
+	if (rv < 0)
+		return _idr_rc_to_errno(rv);
 	*id = rv;
 	return 0;
 }
@@ -696,12 +688,8 @@ int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
  restart:
 	/* get vacant slot */
 	t = idr_get_empty_slot(&ida->idr, idr_id, pa);
-	if (t < 0) {
-		if (t == -1)
-			return -EAGAIN;
-		else /* will be -3 */
-			return -ENOSPC;
-	}
+	if (t < 0)
+		return _idr_rc_to_errno(t);
 
 	if (t * IDA_BITMAP_BITS >= MAX_ID_BIT)
 		return -ENOSPC;
-- 
cgit v1.2.3


From 3219b3b7456d5cf15ba7b1fe7b1bcf15ce8840e2 Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:48:00 -0700
Subject: idr: make idr_get_new* rcu-safe

Make the idr_get_new* routines rcu-safe.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/idr.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/lib/idr.c b/lib/idr.c
index 80ba06f29d3..44ab3b2a4eb 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -6,6 +6,8 @@
  * Modified by George Anzinger to reuse immediately and to use
  * find bit instructions.  Also removed _irq on spinlocks.
  *
+ * Modified by Nadia Derbey to make it RCU safe.
+ *
  * Small id to pointer translation service.
  *
  * It uses a radix tree like structure as a sparse array indexed
@@ -96,7 +98,7 @@ static void idr_mark_full(struct idr_layer **pa, int id)
  * @gfp_mask:	memory allocation flags
  *
  * This function should be called prior to locking and calling the
- * following function.  It preallocates enough memory to satisfy
+ * idr_get_new* functions. It preallocates enough memory to satisfy
  * the worst possible allocation.
  *
  * If the system is REALLY out of memory this function returns 0,
@@ -170,7 +172,7 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
 			new = get_from_free_list(idp);
 			if (!new)
 				return -1;
-			p->ary[m] = new;
+			rcu_assign_pointer(p->ary[m], new);
 			p->count++;
 		}
 		pa[l--] = p;
@@ -226,7 +228,7 @@ build_up:
 			__set_bit(0, &new->bitmap);
 		p = new;
 	}
-	idp->top = p;
+	rcu_assign_pointer(idp->top, p);
 	idp->layers = layers;
 	v = sub_alloc(idp, &id, pa);
 	if (v == IDR_NEED_TO_GROW)
@@ -245,7 +247,8 @@ static int idr_get_new_above_int(struct idr *idp, void *ptr, int starting_id)
 		 * Successfully found an empty slot.  Install the user
 		 * pointer and mark the slot full.
 		 */
-		pa[0]->ary[id & IDR_MASK] = (struct idr_layer *)ptr;
+		rcu_assign_pointer(pa[0]->ary[id & IDR_MASK],
+				(struct idr_layer *)ptr);
 		pa[0]->count++;
 		idr_mark_full(pa, id);
 	}
@@ -710,7 +713,8 @@ int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
 			return -EAGAIN;
 
 		memset(bitmap, 0, sizeof(struct ida_bitmap));
-		pa[0]->ary[idr_id & IDR_MASK] = (void *)bitmap;
+		rcu_assign_pointer(pa[0]->ary[idr_id & IDR_MASK],
+				(void *)bitmap);
 		pa[0]->count++;
 	}
 
-- 
cgit v1.2.3


From f9c46d6ea5ce138a886c3a0f10a46130afab75f5 Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:48:01 -0700
Subject: idr: make idr_find rcu-safe

Make idr_find rcu-safe: it can now be called inside an rcu_read critical
section.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/idr.h | 16 ++++++++++++++++
 lib/idr.c           | 11 ++++++-----
 2 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/include/linux/idr.h b/include/linux/idr.h
index 762c3f2c631..fa035f96f2a 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -79,6 +79,22 @@ struct idr {
 
 #define _idr_rc_to_errno(rc) ((rc) == -1 ? -EAGAIN : -ENOSPC)
 
+/**
+ * idr synchronization (stolen from radix-tree.h)
+ *
+ * idr_find() is able to be called locklessly, using RCU. The caller must
+ * ensure calls to this function are made within rcu_read_lock() regions.
+ * Other readers (lock-free or otherwise) and modifications may be running
+ * concurrently.
+ *
+ * It is still required that the caller manage the synchronization and
+ * lifetimes of the items. So if RCU lock-free lookups are used, typically
+ * this would mean that the items have their own locks, or are amenable to
+ * lock-free access; and that the items are freed by RCU (or only freed after
+ * having been deleted from the idr tree *and* a synchronize_rcu() grace
+ * period).
+ */
+
 /*
  * This is what we export.
  */
diff --git a/lib/idr.c b/lib/idr.c
index 44ab3b2a4eb..21e12af1f23 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -456,7 +456,8 @@ EXPORT_SYMBOL(idr_destroy);
  * return indicates that @id is not valid or you passed %NULL in
  * idr_get_new().
  *
- * The caller must serialize idr_find() vs idr_get_new() and idr_remove().
+ * This function can be called under rcu_read_lock(), given that the leaf
+ * pointers lifetimes are correctly managed.
  */
 void *idr_find(struct idr *idp, int id)
 {
@@ -464,7 +465,7 @@ void *idr_find(struct idr *idp, int id)
 	struct idr_layer *p;
 
 	n = idp->layers * IDR_BITS;
-	p = idp->top;
+	p = rcu_dereference(idp->top);
 
 	/* Mask off upper bits we don't use for the search. */
 	id &= MAX_ID_MASK;
@@ -474,7 +475,7 @@ void *idr_find(struct idr *idp, int id)
 
 	while (n > 0 && p) {
 		n -= IDR_BITS;
-		p = p->ary[(id >> n) & IDR_MASK];
+		p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
 	}
 	return((void *)p);
 }
@@ -507,7 +508,7 @@ int idr_for_each(struct idr *idp,
 	struct idr_layer **paa = &pa[0];
 
 	n = idp->layers * IDR_BITS;
-	p = idp->top;
+	p = rcu_dereference(idp->top);
 	max = 1 << n;
 
 	id = 0;
@@ -515,7 +516,7 @@ int idr_for_each(struct idr *idp,
 		while (n > 0 && p) {
 			n -= IDR_BITS;
 			*paa++ = p;
-			p = p->ary[(id >> n) & IDR_MASK];
+			p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
 		}
 
 		if (p) {
-- 
cgit v1.2.3


From cf481c20c476ad2c0febdace9ce23f5a4db19582 Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:48:02 -0700
Subject: idr: make idr_remove rcu-safe

Introduce the free_layer() routine: it is the one that actually frees memory
after a grace period has elapsed.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/idr.c | 57 +++++++++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 43 insertions(+), 14 deletions(-)

diff --git a/lib/idr.c b/lib/idr.c
index 21e12af1f23..3476f8203e9 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -52,6 +52,19 @@ static struct idr_layer *get_from_free_list(struct idr *idp)
 	return(p);
 }
 
+static void idr_layer_rcu_free(struct rcu_head *head)
+{
+	struct idr_layer *layer;
+
+	layer = container_of(head, struct idr_layer, rcu_head);
+	kmem_cache_free(idr_layer_cache, layer);
+}
+
+static inline void free_layer(struct idr_layer *p)
+{
+	call_rcu(&p->rcu_head, idr_layer_rcu_free);
+}
+
 /* only called when idp->lock is held */
 static void __move_to_free_list(struct idr *idp, struct idr_layer *p)
 {
@@ -331,6 +344,7 @@ static void sub_remove(struct idr *idp, int shift, int id)
 	struct idr_layer *p = idp->top;
 	struct idr_layer **pa[MAX_LEVEL];
 	struct idr_layer ***paa = &pa[0];
+	struct idr_layer *to_free;
 	int n;
 
 	*paa = NULL;
@@ -346,13 +360,18 @@ static void sub_remove(struct idr *idp, int shift, int id)
 	n = id & IDR_MASK;
 	if (likely(p != NULL && test_bit(n, &p->bitmap))){
 		__clear_bit(n, &p->bitmap);
-		p->ary[n] = NULL;
+		rcu_assign_pointer(p->ary[n], NULL);
+		to_free = NULL;
 		while(*paa && ! --((**paa)->count)){
-			move_to_free_list(idp, **paa);
+			if (to_free)
+				free_layer(to_free);
+			to_free = **paa;
 			**paa-- = NULL;
 		}
 		if (!*paa)
 			idp->layers = 0;
+		if (to_free)
+			free_layer(to_free);
 	} else
 		idr_remove_warning(id);
 }
@@ -365,22 +384,34 @@ static void sub_remove(struct idr *idp, int shift, int id)
 void idr_remove(struct idr *idp, int id)
 {
 	struct idr_layer *p;
+	struct idr_layer *to_free;
 
 	/* Mask off upper bits we don't use for the search. */
 	id &= MAX_ID_MASK;
 
 	sub_remove(idp, (idp->layers - 1) * IDR_BITS, id);
 	if (idp->top && idp->top->count == 1 && (idp->layers > 1) &&
-	    idp->top->ary[0]) {  // We can drop a layer
-
+	    idp->top->ary[0]) {
+		/*
+		 * Single child at leftmost slot: we can shrink the tree.
+		 * This level is not needed anymore since when layers are
+		 * inserted, they are inserted at the top of the existing
+		 * tree.
+		 */
+		to_free = idp->top;
 		p = idp->top->ary[0];
-		idp->top->bitmap = idp->top->count = 0;
-		move_to_free_list(idp, idp->top);
-		idp->top = p;
+		rcu_assign_pointer(idp->top, p);
 		--idp->layers;
+		to_free->bitmap = to_free->count = 0;
+		free_layer(to_free);
 	}
 	while (idp->id_free_cnt >= IDR_FREE_MAX) {
 		p = get_from_free_list(idp);
+		/*
+		 * Note: we don't call the rcu callback here, since the only
+		 * layers that fall into the freelist are those that have been
+		 * preallocated.
+		 */
 		kmem_cache_free(idr_layer_cache, p);
 	}
 	return;
@@ -421,15 +452,13 @@ void idr_remove_all(struct idr *idp)
 
 		id += 1 << n;
 		while (n < fls(id)) {
-			if (p) {
-				memset(p, 0, sizeof *p);
-				move_to_free_list(idp, p);
-			}
+			if (p)
+				free_layer(p);
 			n += IDR_BITS;
 			p = *--paa;
 		}
 	}
-	idp->top = NULL;
+	rcu_assign_pointer(idp->top, NULL);
 	idp->layers = 0;
 }
 EXPORT_SYMBOL(idr_remove_all);
@@ -546,7 +575,7 @@ EXPORT_SYMBOL(idr_for_each);
  * A -ENOENT return indicates that @id was not found.
  * A -EINVAL return indicates that @id was not within valid constraints.
  *
- * The caller must serialize vs idr_find(), idr_get_new(), and idr_remove().
+ * The caller must serialize with writers.
  */
 void *idr_replace(struct idr *idp, void *ptr, int id)
 {
@@ -572,7 +601,7 @@ void *idr_replace(struct idr *idp, void *ptr, int id)
 		return ERR_PTR(-ENOENT);
 
 	old_p = p->ary[n];
-	p->ary[n] = ptr;
+	rcu_assign_pointer(p->ary[n], ptr);
 
 	return old_p;
 }
-- 
cgit v1.2.3


From 983bfb7db303cfde56ae5bbf4e0f2f46e38c9576 Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:48:03 -0700
Subject: ipc: call idr_find() without locking in ipc_lock()

Call idr_find() locklessly from ipc_lock(), since the idr tree is now RCU
protected.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 ipc/util.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/ipc/util.c b/ipc/util.c
index 3339177b336..0f468c34e83 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -688,10 +688,6 @@ void ipc64_perm_to_ipc_perm (struct ipc64_perm *in, struct ipc_perm *out)
  * Look for an id in the ipc ids idr and lock the associated ipc object.
  *
  * The ipc object is locked on exit.
- *
- * This is the routine that should be called when the rw_mutex is not already
- * held, i.e. idr tree not protected: it protects the idr tree in read mode
- * during the idr_find().
  */
 
 struct kern_ipc_perm *ipc_lock(struct ipc_ids *ids, int id)
@@ -699,18 +695,13 @@ struct kern_ipc_perm *ipc_lock(struct ipc_ids *ids, int id)
 	struct kern_ipc_perm *out;
 	int lid = ipcid_to_idx(id);
 
-	down_read(&ids->rw_mutex);
-
 	rcu_read_lock();
 	out = idr_find(&ids->ipcs_idr, lid);
 	if (out == NULL) {
 		rcu_read_unlock();
-		up_read(&ids->rw_mutex);
 		return ERR_PTR(-EINVAL);
 	}
 
-	up_read(&ids->rw_mutex);
-
 	spin_lock(&out->lock);
 	
 	/* ipc_rmid() may have already freed the ID while ipc_lock
-- 
cgit v1.2.3


From 00c2bf85d8febfcfddde63822043462b026134ff Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:48:03 -0700
Subject: ipc: get rid of ipc_lock_down()

Remove the ipc_lock_down() routines: they used to call idr_find() locklessly
(given that the ipc ids lock was already held), so they are not needed
anymore.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 ipc/shm.c  | 21 +++------------------
 ipc/util.c | 52 +---------------------------------------------------
 ipc/util.h |  6 ------
 3 files changed, 4 insertions(+), 75 deletions(-)

diff --git a/ipc/shm.c b/ipc/shm.c
index a726aebce7d..e77ec698cf4 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -111,24 +111,9 @@ void __init shm_init (void)
 				IPC_SHM_IDS, sysvipc_shm_proc_show);
 }
 
-/*
- * shm_lock_(check_)down routines are called in the paths where the rw_mutex
- * is held to protect access to the idr tree.
- */
-static inline struct shmid_kernel *shm_lock_down(struct ipc_namespace *ns,
-						int id)
-{
-	struct kern_ipc_perm *ipcp = ipc_lock_down(&shm_ids(ns), id);
-
-	if (IS_ERR(ipcp))
-		return (struct shmid_kernel *)ipcp;
-
-	return container_of(ipcp, struct shmid_kernel, shm_perm);
-}
-
 /*
  * shm_lock_(check_) routines are called in the paths where the rw_mutex
- * is not held.
+ * is not necessarily held.
  */
 static inline struct shmid_kernel *shm_lock(struct ipc_namespace *ns, int id)
 {
@@ -211,7 +196,7 @@ static void shm_close(struct vm_area_struct *vma)
 
 	down_write(&shm_ids(ns).rw_mutex);
 	/* remove from the list of attaches of the shm segment */
-	shp = shm_lock_down(ns, sfd->id);
+	shp = shm_lock(ns, sfd->id);
 	BUG_ON(IS_ERR(shp));
 	shp->shm_lprid = task_tgid_vnr(current);
 	shp->shm_dtim = get_seconds();
@@ -932,7 +917,7 @@ invalid:
 
 out_nattch:
 	down_write(&shm_ids(ns).rw_mutex);
-	shp = shm_lock_down(ns, shmid);
+	shp = shm_lock(ns, shmid);
 	BUG_ON(IS_ERR(shp));
 	shp->shm_nattch--;
 	if(shp->shm_nattch == 0 &&
diff --git a/ipc/util.c b/ipc/util.c
index 0f468c34e83..49b3ea615dc 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -716,56 +716,6 @@ struct kern_ipc_perm *ipc_lock(struct ipc_ids *ids, int id)
 	return out;
 }
 
-/**
- * ipc_lock_down - Lock an ipc structure with rw_sem held
- * @ids: IPC identifier set
- * @id: ipc id to look for
- *
- * Look for an id in the ipc ids idr and lock the associated ipc object.
- *
- * The ipc object is locked on exit.
- *
- * This is the routine that should be called when the rw_mutex is already
- * held, i.e. idr tree protected.
- */
-
-struct kern_ipc_perm *ipc_lock_down(struct ipc_ids *ids, int id)
-{
-	struct kern_ipc_perm *out;
-	int lid = ipcid_to_idx(id);
-
-	rcu_read_lock();
-	out = idr_find(&ids->ipcs_idr, lid);
-	if (out == NULL) {
-		rcu_read_unlock();
-		return ERR_PTR(-EINVAL);
-	}
-
-	spin_lock(&out->lock);
-
-	/*
-	 * No need to verify that the structure is still valid since the
-	 * rw_mutex is held.
-	 */
-	return out;
-}
-
-struct kern_ipc_perm *ipc_lock_check_down(struct ipc_ids *ids, int id)
-{
-	struct kern_ipc_perm *out;
-
-	out = ipc_lock_down(ids, id);
-	if (IS_ERR(out))
-		return out;
-
-	if (ipc_checkid(out, id)) {
-		ipc_unlock(out);
-		return ERR_PTR(-EIDRM);
-	}
-
-	return out;
-}
-
 struct kern_ipc_perm *ipc_lock_check(struct ipc_ids *ids, int id)
 {
 	struct kern_ipc_perm *out;
@@ -837,7 +787,7 @@ struct kern_ipc_perm *ipcctl_pre_down(struct ipc_ids *ids, int id, int cmd,
 	int err;
 
 	down_write(&ids->rw_mutex);
-	ipcp = ipc_lock_check_down(ids, id);
+	ipcp = ipc_lock_check(ids, id);
 	if (IS_ERR(ipcp)) {
 		err = PTR_ERR(ipcp);
 		goto out_up;
diff --git a/ipc/util.h b/ipc/util.h
index cdb966aebe0..3646b45a03c 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -102,11 +102,6 @@ void* ipc_rcu_alloc(int size);
 void ipc_rcu_getref(void *ptr);
 void ipc_rcu_putref(void *ptr);
 
-/*
- * ipc_lock_down: called with rw_mutex held
- * ipc_lock: called without that lock held
- */
-struct kern_ipc_perm *ipc_lock_down(struct ipc_ids *, int);
 struct kern_ipc_perm *ipc_lock(struct ipc_ids *, int);
 
 void kernel_to_ipc64_perm(struct kern_ipc_perm *in, struct ipc64_perm *out);
@@ -155,7 +150,6 @@ static inline void ipc_unlock(struct kern_ipc_perm *perm)
 	rcu_read_unlock();
 }
 
-struct kern_ipc_perm *ipc_lock_check_down(struct ipc_ids *ids, int id);
 struct kern_ipc_perm *ipc_lock_check(struct ipc_ids *ids, int id);
 int ipcget(struct ipc_namespace *ns, struct ipc_ids *ids,
 			struct ipc_ops *ops, struct ipc_params *params);
-- 
cgit v1.2.3


From 4daa28f6d8f5cda8ea0f55048e3c8811c384cbdd Mon Sep 17 00:00:00 2001
From: Manfred Spraul <manfred@colorfullife.com>
Date: Fri, 25 Jul 2008 01:48:04 -0700
Subject: ipc/sem.c: convert undo structures to struct list_head

The undo structures contain two linked lists, the attached patch replaces
them with generic struct list_head lists.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sem.h |  12 ++--
 ipc/sem.c           | 163 ++++++++++++++++++++++++++++------------------------
 2 files changed, 95 insertions(+), 80 deletions(-)

diff --git a/include/linux/sem.h b/include/linux/sem.h
index c8eaad9e4b7..6a1af1b49a1 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -95,7 +95,7 @@ struct sem_array {
 	struct sem		*sem_base;	/* ptr to first semaphore in array */
 	struct sem_queue	*sem_pending;	/* pending operations to be processed */
 	struct sem_queue	**sem_pending_last; /* last pending operation */
-	struct sem_undo		*undo;		/* undo requests on this array */
+	struct list_head	list_id;	/* undo requests on this array */
 	unsigned long		sem_nsems;	/* no. of semaphores in array */
 };
 
@@ -118,8 +118,8 @@ struct sem_queue {
  * when the process exits.
  */
 struct sem_undo {
-	struct sem_undo *	proc_next;	/* next entry on this process */
-	struct sem_undo *	id_next;	/* next entry on this semaphore set */
+	struct list_head	list_proc;	/* per-process list: all undos from one process */
+	struct list_head	list_id;	/* per semaphore array list: all undos for one array */
 	int			semid;		/* semaphore set identifier */
 	short *			semadj;		/* array of adjustments, one per semaphore */
 };
@@ -128,9 +128,9 @@ struct sem_undo {
  * that may be shared among all a CLONE_SYSVSEM task group.
  */ 
 struct sem_undo_list {
-	atomic_t	refcnt;
-	spinlock_t	lock;
-	struct sem_undo	*proc_list;
+	atomic_t		refcnt;
+	spinlock_t		lock;
+	struct list_head	list_proc;
 };
 
 struct sysv_sem {
diff --git a/ipc/sem.c b/ipc/sem.c
index e9418df5ff3..4f26c715735 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -274,7 +274,7 @@ static int newary(struct ipc_namespace *ns, struct ipc_params *params)
 	sma->sem_base = (struct sem *) &sma[1];
 	/* sma->sem_pending = NULL; */
 	sma->sem_pending_last = &sma->sem_pending;
-	/* sma->undo = NULL; */
+	INIT_LIST_HEAD(&sma->list_id);
 	sma->sem_nsems = nsems;
 	sma->sem_ctime = get_seconds();
 	sem_unlock(sma);
@@ -536,7 +536,8 @@ static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
 	 * (They will be freed without any further action in exit_sem()
 	 * or during the next semop.)
 	 */
-	for (un = sma->undo; un; un = un->id_next)
+	assert_spin_locked(&sma->sem_perm.lock);
+	list_for_each_entry(un, &sma->list_id, list_id)
 		un->semid = -1;
 
 	/* Wake up all pending processes and let them fail with EIDRM. */
@@ -763,9 +764,12 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
 
 		for (i = 0; i < nsems; i++)
 			sma->sem_base[i].semval = sem_io[i];
-		for (un = sma->undo; un; un = un->id_next)
+
+		assert_spin_locked(&sma->sem_perm.lock);
+		list_for_each_entry(un, &sma->list_id, list_id) {
 			for (i = 0; i < nsems; i++)
 				un->semadj[i] = 0;
+		}
 		sma->sem_ctime = get_seconds();
 		/* maybe some queued-up processes were waiting for this */
 		update_queue(sma);
@@ -797,12 +801,15 @@ static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
 	{
 		int val = arg.val;
 		struct sem_undo *un;
+
 		err = -ERANGE;
 		if (val > SEMVMX || val < 0)
 			goto out_unlock;
 
-		for (un = sma->undo; un; un = un->id_next)
+		assert_spin_locked(&sma->sem_perm.lock);
+		list_for_each_entry(un, &sma->list_id, list_id)
 			un->semadj[semnum] = 0;
+
 		curr->semval = val;
 		curr->sempid = task_tgid_vnr(current);
 		sma->sem_ctime = get_seconds();
@@ -952,6 +959,8 @@ static inline int get_undo_list(struct sem_undo_list **undo_listp)
 			return -ENOMEM;
 		spin_lock_init(&undo_list->lock);
 		atomic_set(&undo_list->refcnt, 1);
+		INIT_LIST_HEAD(&undo_list->list_proc);
+
 		current->sysvsem.undo_list = undo_list;
 	}
 	*undo_listp = undo_list;
@@ -960,25 +969,30 @@ static inline int get_undo_list(struct sem_undo_list **undo_listp)
 
 static struct sem_undo *lookup_undo(struct sem_undo_list *ulp, int semid)
 {
-	struct sem_undo **last, *un;
-
-	last = &ulp->proc_list;
-	un = *last;
-	while(un != NULL) {
-		if(un->semid==semid)
-			break;
-		if(un->semid==-1) {
-			*last=un->proc_next;
-			kfree(un);
-		} else {
-			last=&un->proc_next;
+	struct sem_undo *walk, *tmp;
+
+	assert_spin_locked(&ulp->lock);
+	list_for_each_entry_safe(walk, tmp, &ulp->list_proc, list_proc) {
+		if (walk->semid == semid)
+			return walk;
+		if (walk->semid == -1) {
+			list_del(&walk->list_proc);
+			kfree(walk);
 		}
-		un=*last;
 	}
-	return un;
+	return NULL;
 }
 
-static struct sem_undo *find_undo(struct ipc_namespace *ns, int semid)
+/**
+ * find_alloc_undo - Lookup (and if not present create) undo array
+ * @ns: namespace
+ * @semid: semaphore array id
+ *
+ * The function looks up (and if not present creates) the undo structure.
+ * The size of the undo structure depends on the size of the semaphore
+ * array, thus the alloc path is not that straightforward.
+ */
+static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
 {
 	struct sem_array *sma;
 	struct sem_undo_list *ulp;
@@ -997,6 +1011,7 @@ static struct sem_undo *find_undo(struct ipc_namespace *ns, int semid)
 		goto out;
 
 	/* no undo structure around - allocate one. */
+	/* step 1: figure out the size of the semaphore array */
 	sma = sem_lock_check(ns, semid);
 	if (IS_ERR(sma))
 		return ERR_PTR(PTR_ERR(sma));
@@ -1004,15 +1019,19 @@ static struct sem_undo *find_undo(struct ipc_namespace *ns, int semid)
 	nsems = sma->sem_nsems;
 	sem_getref_and_unlock(sma);
 
+	/* step 2: allocate new undo structure */
 	new = kzalloc(sizeof(struct sem_undo) + sizeof(short)*nsems, GFP_KERNEL);
 	if (!new) {
 		sem_putref(sma);
 		return ERR_PTR(-ENOMEM);
 	}
-	new->semadj = (short *) &new[1];
-	new->semid = semid;
 
+	/* step 3: Acquire the lock on the undo list pointer */
 	spin_lock(&ulp->lock);
+
+	/* step 4: check for races: someone else allocated the undo struct,
+	 *         semaphore array was destroyed.
+	 */
 	un = lookup_undo(ulp, semid);
 	if (un) {
 		spin_unlock(&ulp->lock);
@@ -1028,13 +1047,17 @@ static struct sem_undo *find_undo(struct ipc_namespace *ns, int semid)
 		un = ERR_PTR(-EIDRM);
 		goto out;
 	}
-	new->proc_next = ulp->proc_list;
-	ulp->proc_list = new;
-	new->id_next = sma->undo;
-	sma->undo = new;
+	/* step 5: initialize & link new undo structure */
+	new->semadj = (short *) &new[1];
+	new->semid = semid;
+	assert_spin_locked(&ulp->lock);
+	list_add(&new->list_proc, &ulp->list_proc);
+	assert_spin_locked(&sma->sem_perm.lock);
+	list_add(&new->list_id, &sma->list_id);
+
 	sem_unlock(sma);
-	un = new;
 	spin_unlock(&ulp->lock);
+	un = new;
 out:
 	return un;
 }
@@ -1090,9 +1113,8 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 			alter = 1;
 	}
 
-retry_undos:
 	if (undos) {
-		un = find_undo(ns, semid);
+		un = find_alloc_undo(ns, semid);
 		if (IS_ERR(un)) {
 			error = PTR_ERR(un);
 			goto out_free;
@@ -1107,14 +1129,14 @@ retry_undos:
 	}
 
 	/*
-	 * semid identifiers are not unique - find_undo may have
+	 * semid identifiers are not unique - find_alloc_undo may have
 	 * allocated an undo structure, it was invalidated by an RMID
-	 * and now a new array with received the same id. Check and retry.
+	 * and now a new array with received the same id. Check and fail.
 	 */
-	if (un && un->semid == -1) {
-		sem_unlock(sma);
-		goto retry_undos;
-	}
+	error = -EIDRM;
+	if (un && un->semid == -1)
+		goto out_unlock_free;
+
 	error = -EFBIG;
 	if (max >= sma->sem_nsems)
 		goto out_unlock_free;
@@ -1243,56 +1265,44 @@ int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
  */
 void exit_sem(struct task_struct *tsk)
 {
-	struct sem_undo_list *undo_list;
-	struct sem_undo *u, **up;
-	struct ipc_namespace *ns;
+	struct sem_undo_list *ulp;
+	struct sem_undo *un, *tmp;
 
-	undo_list = tsk->sysvsem.undo_list;
-	if (!undo_list)
+	ulp = tsk->sysvsem.undo_list;
+	if (!ulp)
 		return;
 	tsk->sysvsem.undo_list = NULL;
 
-	if (!atomic_dec_and_test(&undo_list->refcnt))
+	if (!atomic_dec_and_test(&ulp->refcnt))
 		return;
 
-	ns = tsk->nsproxy->ipc_ns;
-	/* There's no need to hold the semundo list lock, as current
-         * is the last task exiting for this undo list.
-	 */
-	for (up = &undo_list->proc_list; (u = *up); *up = u->proc_next, kfree(u)) {
+	spin_lock(&ulp->lock);
+
+	list_for_each_entry_safe(un, tmp, &ulp->list_proc, list_proc) {
 		struct sem_array *sma;
-		int nsems, i;
-		struct sem_undo *un, **unp;
-		int semid;
-	       
-		semid = u->semid;
-
-		if(semid == -1)
-			continue;
-		sma = sem_lock(ns, semid);
+		int i;
+
+		if (un->semid == -1)
+			goto free;
+
+		sma = sem_lock(tsk->nsproxy->ipc_ns, un->semid);
 		if (IS_ERR(sma))
-			continue;
+			goto free;
 
-		if (u->semid == -1)
-			goto next_entry;
+		if (un->semid == -1)
+			goto unlock_free;
 
-		BUG_ON(sem_checkid(sma, u->semid));
+		BUG_ON(sem_checkid(sma, un->semid));
 
-		/* remove u from the sma->undo list */
-		for (unp = &sma->undo; (un = *unp); unp = &un->id_next) {
-			if (u == un)
-				goto found;
-		}
-		printk ("exit_sem undo list error id=%d\n", u->semid);
-		goto next_entry;
-found:
-		*unp = un->id_next;
-		/* perform adjustments registered in u */
-		nsems = sma->sem_nsems;
-		for (i = 0; i < nsems; i++) {
+		/* remove un from sma->list_id */
+		assert_spin_locked(&sma->sem_perm.lock);
+		list_del(&un->list_id);
+
+		/* perform adjustments registered in un */
+		for (i = 0; i < sma->sem_nsems; i++) {
 			struct sem * semaphore = &sma->sem_base[i];
-			if (u->semadj[i]) {
-				semaphore->semval += u->semadj[i];
+			if (un->semadj[i]) {
+				semaphore->semval += un->semadj[i];
 				/*
 				 * Range checks of the new semaphore value,
 				 * not defined by sus:
@@ -1316,10 +1326,15 @@ found:
 		sma->sem_otime = get_seconds();
 		/* maybe some queued-up processes were waiting for this */
 		update_queue(sma);
-next_entry:
+unlock_free:
 		sem_unlock(sma);
+free:
+		assert_spin_locked(&ulp->lock);
+		list_del(&un->list_proc);
+		kfree(un);
 	}
-	kfree(undo_list);
+	spin_unlock(&ulp->lock);
+	kfree(ulp);
 }
 
 #ifdef CONFIG_PROC_FS
-- 
cgit v1.2.3


From 2c0c29d414087f3b021059673c20a7088f5f1fff Mon Sep 17 00:00:00 2001
From: Manfred Spraul <manfred@colorfullife.com>
Date: Fri, 25 Jul 2008 01:48:05 -0700
Subject: ipc/sem.c: remove unused entries from struct sem_queue

sem_queue.sma and sem_queue.id were never used, the attached patch removes
them.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sem.h | 2 --
 ipc/sem.c           | 2 --
 2 files changed, 4 deletions(-)

diff --git a/include/linux/sem.h b/include/linux/sem.h
index 6a1af1b49a1..87756ef1198 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -107,8 +107,6 @@ struct sem_queue {
 	struct sem_undo *	undo;	 /* undo structure */
 	int    			pid;	 /* process id of requesting process */
 	int    			status;	 /* completion status of operation */
-	struct sem_array *	sma;	 /* semaphore array for operations */
-	int			id;	 /* internal sem id */
 	struct sembuf *		sops;	 /* array of pending operations */
 	int			nsops;	 /* number of operations */
 	int			alter;   /* does the operation alter the array? */
diff --git a/ipc/sem.c b/ipc/sem.c
index 4f26c715735..d5ce4000ca1 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1160,12 +1160,10 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 	 * task into the pending queue and go to sleep.
 	 */
 		
-	queue.sma = sma;
 	queue.sops = sops;
 	queue.nsops = nsops;
 	queue.undo = un;
 	queue.pid = task_tgid_vnr(current);
-	queue.id = semid;
 	queue.alter = alter;
 	if (alter)
 		append_to_queue(sma ,&queue);
-- 
cgit v1.2.3


From a1193f8ec091cd8fd309cc2982abe4499f6f2b4d Mon Sep 17 00:00:00 2001
From: Manfred Spraul <manfred@colorfullife.com>
Date: Fri, 25 Jul 2008 01:48:06 -0700
Subject: ipc/sem.c: convert sem_array.sem_pending to struct list_head

sem_array.sem_pending is a double linked list, the attached patch converts
it to struct list_head.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sem.h | 12 +++----
 ipc/sem.c           | 92 ++++++++++++++++++++---------------------------------
 2 files changed, 40 insertions(+), 64 deletions(-)

diff --git a/include/linux/sem.h b/include/linux/sem.h
index 87756ef1198..d42599395d7 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -93,21 +93,19 @@ struct sem_array {
 	time_t			sem_otime;	/* last semop time */
 	time_t			sem_ctime;	/* last change time */
 	struct sem		*sem_base;	/* ptr to first semaphore in array */
-	struct sem_queue	*sem_pending;	/* pending operations to be processed */
-	struct sem_queue	**sem_pending_last; /* last pending operation */
+	struct list_head	sem_pending;	/* pending operations to be processed */
 	struct list_head	list_id;	/* undo requests on this array */
 	unsigned long		sem_nsems;	/* no. of semaphores in array */
 };
 
 /* One queue for each sleeping process in the system. */
 struct sem_queue {
-	struct sem_queue *	next;	 /* next entry in the queue */
-	struct sem_queue **	prev;	 /* previous entry in the queue, *(q->prev) == q */
-	struct task_struct*	sleeper; /* this process */
-	struct sem_undo *	undo;	 /* undo structure */
+	struct list_head	list;	 /* queue of pending operations */
+	struct task_struct	*sleeper; /* this process */
+	struct sem_undo		*undo;	 /* undo structure */
 	int    			pid;	 /* process id of requesting process */
 	int    			status;	 /* completion status of operation */
-	struct sembuf *		sops;	 /* array of pending operations */
+	struct sembuf		*sops;	 /* array of pending operations */
 	int			nsops;	 /* number of operations */
 	int			alter;   /* does the operation alter the array? */
 };
diff --git a/ipc/sem.c b/ipc/sem.c
index d5ce4000ca1..3ca232736b3 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -272,8 +272,7 @@ static int newary(struct ipc_namespace *ns, struct ipc_params *params)
 	ns->used_sems += nsems;
 
 	sma->sem_base = (struct sem *) &sma[1];
-	/* sma->sem_pending = NULL; */
-	sma->sem_pending_last = &sma->sem_pending;
+	INIT_LIST_HEAD(&sma->sem_pending);
 	INIT_LIST_HEAD(&sma->list_id);
 	sma->sem_nsems = nsems;
 	sma->sem_ctime = get_seconds();
@@ -331,38 +330,6 @@ asmlinkage long sys_semget(key_t key, int nsems, int semflg)
 	return ipcget(ns, &sem_ids(ns), &sem_ops, &sem_params);
 }
 
-/* Manage the doubly linked list sma->sem_pending as a FIFO:
- * insert new queue elements at the tail sma->sem_pending_last.
- */
-static inline void append_to_queue (struct sem_array * sma,
-				    struct sem_queue * q)
-{
-	*(q->prev = sma->sem_pending_last) = q;
-	*(sma->sem_pending_last = &q->next) = NULL;
-}
-
-static inline void prepend_to_queue (struct sem_array * sma,
-				     struct sem_queue * q)
-{
-	q->next = sma->sem_pending;
-	*(q->prev = &sma->sem_pending) = q;
-	if (q->next)
-		q->next->prev = &q->next;
-	else /* sma->sem_pending_last == &sma->sem_pending */
-		sma->sem_pending_last = &q->next;
-}
-
-static inline void remove_from_queue (struct sem_array * sma,
-				      struct sem_queue * q)
-{
-	*(q->prev) = q->next;
-	if (q->next)
-		q->next->prev = q->prev;
-	else /* sma->sem_pending_last == &q->next */
-		sma->sem_pending_last = q->prev;
-	q->prev = NULL; /* mark as removed */
-}
-
 /*
  * Determine whether a sequence of semaphore operations would succeed
  * all at once. Return 0 if yes, 1 if need to sleep, else return error code.
@@ -438,16 +405,15 @@ static void update_queue (struct sem_array * sma)
 	int error;
 	struct sem_queue * q;
 
-	q = sma->sem_pending;
-	while(q) {
+	q = list_entry(sma->sem_pending.next, struct sem_queue, list);
+	while (&q->list != &sma->sem_pending) {
 		error = try_atomic_semop(sma, q->sops, q->nsops,
 					 q->undo, q->pid);
 
 		/* Does q->sleeper still need to sleep? */
 		if (error <= 0) {
 			struct sem_queue *n;
-			remove_from_queue(sma,q);
-			q->status = IN_WAKEUP;
+
 			/*
 			 * Continue scanning. The next operation
 			 * that must be checked depends on the type of the
@@ -458,11 +424,26 @@ static void update_queue (struct sem_array * sma)
 			 *   for semaphore values to become 0.
 			 * - if the operation didn't modify the array,
 			 *   then just continue.
+			 * The order of list_del() and reading ->next
+			 * is crucial: In the former case, the list_del()
+			 * must be done first [because we might be the
+			 * first entry in ->sem_pending], in the latter
+			 * case the list_del() must be done last
+			 * [because the list is invalid after the list_del()]
 			 */
-			if (q->alter)
-				n = sma->sem_pending;
-			else
-				n = q->next;
+			if (q->alter) {
+				list_del(&q->list);
+				n = list_entry(sma->sem_pending.next,
+						struct sem_queue, list);
+			} else {
+				n = list_entry(q->list.next, struct sem_queue,
+						list);
+				list_del(&q->list);
+			}
+
+			/* wake up the waiting thread */
+			q->status = IN_WAKEUP;
+
 			wake_up_process(q->sleeper);
 			/* hands-off: q will disappear immediately after
 			 * writing q->status.
@@ -471,7 +452,7 @@ static void update_queue (struct sem_array * sma)
 			q->status = error;
 			q = n;
 		} else {
-			q = q->next;
+			q = list_entry(q->list.next, struct sem_queue, list);
 		}
 	}
 }
@@ -491,7 +472,7 @@ static int count_semncnt (struct sem_array * sma, ushort semnum)
 	struct sem_queue * q;
 
 	semncnt = 0;
-	for (q = sma->sem_pending; q; q = q->next) {
+	list_for_each_entry(q, &sma->sem_pending, list) {
 		struct sembuf * sops = q->sops;
 		int nsops = q->nsops;
 		int i;
@@ -503,13 +484,14 @@ static int count_semncnt (struct sem_array * sma, ushort semnum)
 	}
 	return semncnt;
 }
+
 static int count_semzcnt (struct sem_array * sma, ushort semnum)
 {
 	int semzcnt;
 	struct sem_queue * q;
 
 	semzcnt = 0;
-	for (q = sma->sem_pending; q; q = q->next) {
+	list_for_each_entry(q, &sma->sem_pending, list) {
 		struct sembuf * sops = q->sops;
 		int nsops = q->nsops;
 		int i;
@@ -529,7 +511,7 @@ static int count_semzcnt (struct sem_array * sma, ushort semnum)
 static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
 {
 	struct sem_undo *un;
-	struct sem_queue *q;
+	struct sem_queue *q, *t;
 	struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
 
 	/* Invalidate the existing undo structures for this semaphore set.
@@ -541,17 +523,14 @@ static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
 		un->semid = -1;
 
 	/* Wake up all pending processes and let them fail with EIDRM. */
-	q = sma->sem_pending;
-	while(q) {
-		struct sem_queue *n;
-		/* lazy remove_from_queue: we are killing the whole queue */
-		q->prev = NULL;
-		n = q->next;
+
+	list_for_each_entry_safe(q, t, &sma->sem_pending, list) {
+		list_del(&q->list);
+
 		q->status = IN_WAKEUP;
 		wake_up_process(q->sleeper); /* doesn't sleep */
 		smp_wmb();
 		q->status = -EIDRM;	/* hands-off q */
-		q = n;
 	}
 
 	/* Remove the semaphore set from the IDR */
@@ -1166,9 +1145,9 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 	queue.pid = task_tgid_vnr(current);
 	queue.alter = alter;
 	if (alter)
-		append_to_queue(sma ,&queue);
+		list_add_tail(&queue.list, &sma->sem_pending);
 	else
-		prepend_to_queue(sma ,&queue);
+		list_add(&queue.list, &sma->sem_pending);
 
 	queue.status = -EINTR;
 	queue.sleeper = current;
@@ -1194,7 +1173,6 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 
 	sma = sem_lock(ns, semid);
 	if (IS_ERR(sma)) {
-		BUG_ON(queue.prev != NULL);
 		error = -EIDRM;
 		goto out_free;
 	}
@@ -1212,7 +1190,7 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 	 */
 	if (timeout && jiffies_left == 0)
 		error = -EAGAIN;
-	remove_from_queue(sma,&queue);
+	list_del(&queue.list);
 	goto out_unlock_free;
 
 out_unlock_free:
-- 
cgit v1.2.3


From 380af1b33b3ff92df5cda96329b58f5d1b6b5a53 Mon Sep 17 00:00:00 2001
From: Manfred Spraul <manfred@colorfullife.com>
Date: Fri, 25 Jul 2008 01:48:06 -0700
Subject: ipc/sem.c: rewrite undo list locking

The attached patch:
- reverses the locking order of ulp->lock and sem_lock:
  Previously, it was first ulp->lock, then inside sem_lock.
  Now it's the other way around.
- converts the undo structure to rcu.

Benefits:
- With the old locking order, IPC_RMID could not kfree the undo structures.
  The stale entries remained in the linked lists and were released later.
- The patch fixes a a race in semtimedop(): if both IPC_RMID and a semget() that
  recreates exactly the same id happen between find_alloc_undo() and sem_lock,
  then semtimedop() would access already kfree'd memory.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sem.h |   6 ++-
 ipc/sem.c           | 147 +++++++++++++++++++++++++++++++++-------------------
 2 files changed, 98 insertions(+), 55 deletions(-)

diff --git a/include/linux/sem.h b/include/linux/sem.h
index d42599395d7..1b191c176bc 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -78,6 +78,7 @@ struct  seminfo {
 
 #ifdef __KERNEL__
 #include <asm/atomic.h>
+#include <linux/rcupdate.h>
 
 struct task_struct;
 
@@ -114,7 +115,10 @@ struct sem_queue {
  * when the process exits.
  */
 struct sem_undo {
-	struct list_head	list_proc;	/* per-process list: all undos from one process */
+	struct list_head	list_proc;	/* per-process list: all undos from one process. */
+						/* rcu protected */
+	struct rcu_head		rcu;		/* rcu struct for sem_undo() */
+	struct sem_undo_list	*ulp;		/* sem_undo_list for the process */
 	struct list_head	list_id;	/* per semaphore array list: all undos for one array */
 	int			semid;		/* semaphore set identifier */
 	short *			semadj;		/* array of adjustments, one per semaphore */
diff --git a/ipc/sem.c b/ipc/sem.c
index 3ca232736b3..bf1bc36cb7e 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -504,27 +504,35 @@ static int count_semzcnt (struct sem_array * sma, ushort semnum)
 	return semzcnt;
 }
 
+void free_un(struct rcu_head *head)
+{
+	struct sem_undo *un = container_of(head, struct sem_undo, rcu);
+	kfree(un);
+}
+
 /* Free a semaphore set. freeary() is called with sem_ids.rw_mutex locked
  * as a writer and the spinlock for this semaphore set hold. sem_ids.rw_mutex
  * remains locked on exit.
  */
 static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
 {
-	struct sem_undo *un;
-	struct sem_queue *q, *t;
+	struct sem_undo *un, *tu;
+	struct sem_queue *q, *tq;
 	struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
 
-	/* Invalidate the existing undo structures for this semaphore set.
-	 * (They will be freed without any further action in exit_sem()
-	 * or during the next semop.)
-	 */
+	/* Free the existing undo structures for this semaphore set.  */
 	assert_spin_locked(&sma->sem_perm.lock);
-	list_for_each_entry(un, &sma->list_id, list_id)
+	list_for_each_entry_safe(un, tu, &sma->list_id, list_id) {
+		list_del(&un->list_id);
+		spin_lock(&un->ulp->lock);
 		un->semid = -1;
+		list_del_rcu(&un->list_proc);
+		spin_unlock(&un->ulp->lock);
+		call_rcu(&un->rcu, free_un);
+	}
 
 	/* Wake up all pending processes and let them fail with EIDRM. */
-
-	list_for_each_entry_safe(q, t, &sma->sem_pending, list) {
+	list_for_each_entry_safe(q, tq, &sma->sem_pending, list) {
 		list_del(&q->list);
 
 		q->status = IN_WAKEUP;
@@ -948,16 +956,11 @@ static inline int get_undo_list(struct sem_undo_list **undo_listp)
 
 static struct sem_undo *lookup_undo(struct sem_undo_list *ulp, int semid)
 {
-	struct sem_undo *walk, *tmp;
+	struct sem_undo *walk;
 
-	assert_spin_locked(&ulp->lock);
-	list_for_each_entry_safe(walk, tmp, &ulp->list_proc, list_proc) {
+	list_for_each_entry_rcu(walk, &ulp->list_proc, list_proc) {
 		if (walk->semid == semid)
 			return walk;
-		if (walk->semid == -1) {
-			list_del(&walk->list_proc);
-			kfree(walk);
-		}
 	}
 	return NULL;
 }
@@ -970,6 +973,8 @@ static struct sem_undo *lookup_undo(struct sem_undo_list *ulp, int semid)
  * The function looks up (and if not present creates) the undo structure.
  * The size of the undo structure depends on the size of the semaphore
  * array, thus the alloc path is not that straightforward.
+ * Lifetime-rules: sem_undo is rcu-protected, on success, the function
+ * performs a rcu_read_lock().
  */
 static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
 {
@@ -983,11 +988,13 @@ static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
 	if (error)
 		return ERR_PTR(error);
 
+	rcu_read_lock();
 	spin_lock(&ulp->lock);
 	un = lookup_undo(ulp, semid);
 	spin_unlock(&ulp->lock);
 	if (likely(un!=NULL))
 		goto out;
+	rcu_read_unlock();
 
 	/* no undo structure around - allocate one. */
 	/* step 1: figure out the size of the semaphore array */
@@ -1005,38 +1012,38 @@ static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
 		return ERR_PTR(-ENOMEM);
 	}
 
-	/* step 3: Acquire the lock on the undo list pointer */
-	spin_lock(&ulp->lock);
-
-	/* step 4: check for races: someone else allocated the undo struct,
-	 *         semaphore array was destroyed.
-	 */
-	un = lookup_undo(ulp, semid);
-	if (un) {
-		spin_unlock(&ulp->lock);
-		kfree(new);
-		sem_putref(sma);
-		goto out;
-	}
+	/* step 3: Acquire the lock on semaphore array */
 	sem_lock_and_putref(sma);
 	if (sma->sem_perm.deleted) {
 		sem_unlock(sma);
-		spin_unlock(&ulp->lock);
 		kfree(new);
 		un = ERR_PTR(-EIDRM);
 		goto out;
 	}
+	spin_lock(&ulp->lock);
+
+	/*
+	 * step 4: check for races: did someone else allocate the undo struct?
+	 */
+	un = lookup_undo(ulp, semid);
+	if (un) {
+		kfree(new);
+		goto success;
+	}
 	/* step 5: initialize & link new undo structure */
 	new->semadj = (short *) &new[1];
+	new->ulp = ulp;
 	new->semid = semid;
 	assert_spin_locked(&ulp->lock);
-	list_add(&new->list_proc, &ulp->list_proc);
+	list_add_rcu(&new->list_proc, &ulp->list_proc);
 	assert_spin_locked(&sma->sem_perm.lock);
 	list_add(&new->list_id, &sma->list_id);
+	un = new;
 
-	sem_unlock(sma);
+success:
 	spin_unlock(&ulp->lock);
-	un = new;
+	rcu_read_lock();
+	sem_unlock(sma);
 out:
 	return un;
 }
@@ -1103,6 +1110,8 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 
 	sma = sem_lock_check(ns, semid);
 	if (IS_ERR(sma)) {
+		if (un)
+			rcu_read_unlock();
 		error = PTR_ERR(sma);
 		goto out_free;
 	}
@@ -1111,10 +1120,26 @@ asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
 	 * semid identifiers are not unique - find_alloc_undo may have
 	 * allocated an undo structure, it was invalidated by an RMID
 	 * and now a new array with received the same id. Check and fail.
+	 * This case can be detected checking un->semid. The existance of
+	 * "un" itself is guaranteed by rcu.
 	 */
 	error = -EIDRM;
-	if (un && un->semid == -1)
-		goto out_unlock_free;
+	if (un) {
+		if (un->semid == -1) {
+			rcu_read_unlock();
+			goto out_unlock_free;
+		} else {
+			/*
+			 * rcu lock can be released, "un" cannot disappear:
+			 * - sem_lock is acquired, thus IPC_RMID is
+			 *   impossible.
+			 * - exit_sem is impossible, it always operates on
+			 *   current (or a dead task).
+			 */
+
+			rcu_read_unlock();
+		}
+	}
 
 	error = -EFBIG;
 	if (max >= sma->sem_nsems)
@@ -1242,7 +1267,6 @@ int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
 void exit_sem(struct task_struct *tsk)
 {
 	struct sem_undo_list *ulp;
-	struct sem_undo *un, *tmp;
 
 	ulp = tsk->sysvsem.undo_list;
 	if (!ulp)
@@ -1252,28 +1276,47 @@ void exit_sem(struct task_struct *tsk)
 	if (!atomic_dec_and_test(&ulp->refcnt))
 		return;
 
-	spin_lock(&ulp->lock);
-
-	list_for_each_entry_safe(un, tmp, &ulp->list_proc, list_proc) {
+	for (;;) {
 		struct sem_array *sma;
+		struct sem_undo *un;
+		int semid;
 		int i;
 
-		if (un->semid == -1)
-			goto free;
+		rcu_read_lock();
+		un = list_entry(rcu_dereference(ulp->list_proc.next),
+					struct sem_undo, list_proc);
+		if (&un->list_proc == &ulp->list_proc)
+			semid = -1;
+		 else
+			semid = un->semid;
+		rcu_read_unlock();
 
-		sma = sem_lock(tsk->nsproxy->ipc_ns, un->semid);
-		if (IS_ERR(sma))
-			goto free;
+		if (semid == -1)
+			break;
 
-		if (un->semid == -1)
-			goto unlock_free;
+		sma = sem_lock_check(tsk->nsproxy->ipc_ns, un->semid);
 
-		BUG_ON(sem_checkid(sma, un->semid));
+		/* exit_sem raced with IPC_RMID, nothing to do */
+		if (IS_ERR(sma))
+			continue;
 
-		/* remove un from sma->list_id */
+		un = lookup_undo(ulp, semid);
+		if (un == NULL) {
+			/* exit_sem raced with IPC_RMID+semget() that created
+			 * exactly the same semid. Nothing to do.
+			 */
+			sem_unlock(sma);
+			continue;
+		}
+
+		/* remove un from the linked lists */
 		assert_spin_locked(&sma->sem_perm.lock);
 		list_del(&un->list_id);
 
+		spin_lock(&ulp->lock);
+		list_del_rcu(&un->list_proc);
+		spin_unlock(&ulp->lock);
+
 		/* perform adjustments registered in un */
 		for (i = 0; i < sma->sem_nsems; i++) {
 			struct sem * semaphore = &sma->sem_base[i];
@@ -1302,14 +1345,10 @@ void exit_sem(struct task_struct *tsk)
 		sma->sem_otime = get_seconds();
 		/* maybe some queued-up processes were waiting for this */
 		update_queue(sma);
-unlock_free:
 		sem_unlock(sma);
-free:
-		assert_spin_locked(&ulp->lock);
-		list_del(&un->list_proc);
-		kfree(un);
+
+		call_rcu(&un->rcu, free_un);
 	}
-	spin_unlock(&ulp->lock);
 	kfree(ulp);
 }
 
-- 
cgit v1.2.3


From f1a43f93f0f3bab418800eaccb9e2e3b5427e173 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Fri, 25 Jul 2008 01:48:07 -0700
Subject: ipc: use simple_read_from_buffer()

Also this patch kills unneccesary trailing NULL character.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 ipc/mqueue.c | 25 +++++++------------------
 1 file changed, 7 insertions(+), 18 deletions(-)

diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 3e84b958186..1fdc2eb2f6d 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -314,15 +314,11 @@ static int mqueue_unlink(struct inode *dir, struct dentry *dentry)
 *	through std routines)
 */
 static ssize_t mqueue_read_file(struct file *filp, char __user *u_data,
-				size_t count, loff_t * off)
+				size_t count, loff_t *off)
 {
 	struct mqueue_inode_info *info = MQUEUE_I(filp->f_path.dentry->d_inode);
 	char buffer[FILENT_SIZE];
-	size_t slen;
-	loff_t o;
-
-	if (!count)
-		return 0;
+	ssize_t ret;
 
 	spin_lock(&info->lock);
 	snprintf(buffer, sizeof(buffer),
@@ -335,21 +331,14 @@ static ssize_t mqueue_read_file(struct file *filp, char __user *u_data,
 			pid_vnr(info->notify_owner));
 	spin_unlock(&info->lock);
 	buffer[sizeof(buffer)-1] = '\0';
-	slen = strlen(buffer)+1;
-
-	o = *off;
-	if (o > slen)
-		return 0;
-
-	if (o + count > slen)
-		count = slen - o;
 
-	if (copy_to_user(u_data, buffer + o, count))
-		return -EFAULT;
+	ret = simple_read_from_buffer(u_data, count, off, buffer,
+				strlen(buffer));
+	if (ret <= 0)
+		return ret;
 
-	*off = o + count;
 	filp->f_path.dentry->d_inode->i_atime = filp->f_path.dentry->d_inode->i_ctime = CURRENT_TIME;
-	return count;
+	return ret;
 }
 
 static int mqueue_flush_file(struct file *filp, fl_owner_t id)
-- 
cgit v1.2.3


From 9eefe520c814f6f62c5d36a2ddcd3fb99dfdb30e Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Fri, 25 Jul 2008 01:48:08 -0700
Subject: ipc: do not use a negative value to re-enable msgmni automatic
 recomputing

This patch proposes an alternative to the "magical
positive-versus-negative number trick" Andrew complained about last week
in http://lkml.org/lkml/2008/6/24/418.

This had been introduced with the patches that scale msgmni to the amount
of lowmem.  With these patches, msgmni has a registered notification
routine that recomputes msgmni value upon memory add/remove or ipc
namespace creation/ removal.

When msgmni is changed from user space (i.e.  value written to the proc
file), that notification routine is unregistered, and the way to make it
registered back is to write a negative value into the proc file.  This is
the "magical positive-versus-negative number trick".

To fix this, a new proc file is introduced: /proc/sys/kernel/auto_msgmni.
This file acts as ON/OFF for msgmni automatic recomputing.

With this patch, the process is the following:
1) kernel boots in "automatic recomputing mode"
   /proc/sys/kernel/msgmni contains the value that has been computed (depends
                           on lowmem)
   /proc/sys/kernel/automatic_msgmni contains "1"

2) echo <val> > /proc/sys/kernel/msgmni
   . sets msg_ctlmni to <val>
   . de-activates automatic recomputing (i.e. if, say, some memory is added
     msgmni won't be recomputed anymore)
   . /proc/sys/kernel/automatic_msgmni now contains "0"

3) echo "0" > /proc/sys/kernel/automatic_msgmni
   . de-activates msgmni automatic recomputing
     this has the same effect as 2) except that msg_ctlmni's value stays
     blocked at its current value)

3) echo "1" > /proc/sys/kernel/automatic_msgmni
   . recomputes msgmni's value based on the current available memory size
     and number of ipc namespaces
   . re-activates automatic recomputing for msgmni.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Solofo Ramangalahy <Solofo.Ramangalahy@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ipc_namespace.h |  3 +-
 ipc/ipc_sysctl.c              | 72 +++++++++++++++++++++++++++++++++++--------
 ipc/ipcns_notifier.c          | 20 +++++++++---
 3 files changed, 76 insertions(+), 19 deletions(-)

diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index ea6c18a8b0d..ea330f9e710 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -36,6 +36,7 @@ struct ipc_namespace {
 	int		msg_ctlmni;
 	atomic_t	msg_bytes;
 	atomic_t	msg_hdrs;
+	int		auto_msgmni;
 
 	size_t		shm_ctlmax;
 	size_t		shm_ctlall;
@@ -53,7 +54,7 @@ extern atomic_t nr_ipc_ns;
 
 extern int register_ipcns_notifier(struct ipc_namespace *);
 extern int cond_register_ipcns_notifier(struct ipc_namespace *);
-extern int unregister_ipcns_notifier(struct ipc_namespace *);
+extern void unregister_ipcns_notifier(struct ipc_namespace *);
 extern int ipcns_notify(unsigned long);
 
 #else /* CONFIG_SYSVIPC */
diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
index d3497465cc0..69bc85978ba 100644
--- a/ipc/ipc_sysctl.c
+++ b/ipc/ipc_sysctl.c
@@ -27,15 +27,17 @@ static void *get_ipc(ctl_table *table)
 }
 
 /*
- * Routine that is called when a tunable has successfully been changed by
- * hand and it has a callback routine registered on the ipc namespace notifier
- * chain: we don't want such tunables to be recomputed anymore upon memory
- * add/remove or ipc namespace creation/removal.
- * They can come back to a recomputable state by being set to a <0 value.
+ * Routine that is called when the file "auto_msgmni" has successfully been
+ * written.
+ * Two values are allowed:
+ * 0: unregister msgmni's callback routine from the ipc namespace notifier
+ *    chain. This means that msgmni won't be recomputed anymore upon memory
+ *    add/remove or ipc namespace creation/removal.
+ * 1: register back the callback routine.
  */
-static void tunable_set_callback(int val)
+static void ipc_auto_callback(int val)
 {
-	if (val >= 0)
+	if (!val)
 		unregister_ipcns_notifier(current->nsproxy->ipc_ns);
 	else {
 		/*
@@ -71,7 +73,12 @@ static int proc_ipc_callback_dointvec(ctl_table *table, int write,
 	rc = proc_dointvec(&ipc_table, write, filp, buffer, lenp, ppos);
 
 	if (write && !rc && lenp_bef == *lenp)
-		tunable_set_callback(*((int *)(ipc_table.data)));
+		/*
+		 * Tunable has successfully been changed by hand. Disable its
+		 * automatic adjustment. This simply requires unregistering
+		 * the notifiers that trigger recalculation.
+		 */
+		unregister_ipcns_notifier(current->nsproxy->ipc_ns);
 
 	return rc;
 }
@@ -87,10 +94,39 @@ static int proc_ipc_doulongvec_minmax(ctl_table *table, int write,
 					lenp, ppos);
 }
 
+static int proc_ipcauto_dointvec_minmax(ctl_table *table, int write,
+	struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	struct ctl_table ipc_table;
+	size_t lenp_bef = *lenp;
+	int oldval;
+	int rc;
+
+	memcpy(&ipc_table, table, sizeof(ipc_table));
+	ipc_table.data = get_ipc(table);
+	oldval = *((int *)(ipc_table.data));
+
+	rc = proc_dointvec_minmax(&ipc_table, write, filp, buffer, lenp, ppos);
+
+	if (write && !rc && lenp_bef == *lenp) {
+		int newval = *((int *)(ipc_table.data));
+		/*
+		 * The file "auto_msgmni" has correctly been set.
+		 * React by (un)registering the corresponding tunable, if the
+		 * value has changed.
+		 */
+		if (newval != oldval)
+			ipc_auto_callback(newval);
+	}
+
+	return rc;
+}
+
 #else
 #define proc_ipc_doulongvec_minmax NULL
 #define proc_ipc_dointvec	   NULL
 #define proc_ipc_callback_dointvec NULL
+#define proc_ipcauto_dointvec_minmax NULL
 #endif
 
 #ifdef CONFIG_SYSCTL_SYSCALL
@@ -142,14 +178,11 @@ static int sysctl_ipc_registered_data(ctl_table *table, int __user *name,
 	rc = sysctl_ipc_data(table, name, nlen, oldval, oldlenp, newval,
 		newlen);
 
-	if (newval && newlen && rc > 0) {
+	if (newval && newlen && rc > 0)
 		/*
 		 * Tunable has successfully been changed from userland
 		 */
-		int *data = get_ipc(table);
-
-		tunable_set_callback(*data);
-	}
+		unregister_ipcns_notifier(current->nsproxy->ipc_ns);
 
 	return rc;
 }
@@ -158,6 +191,9 @@ static int sysctl_ipc_registered_data(ctl_table *table, int __user *name,
 #define sysctl_ipc_registered_data NULL
 #endif
 
+static int zero;
+static int one = 1;
+
 static struct ctl_table ipc_kern_table[] = {
 	{
 		.ctl_name	= KERN_SHMMAX,
@@ -222,6 +258,16 @@ static struct ctl_table ipc_kern_table[] = {
 		.proc_handler	= proc_ipc_dointvec,
 		.strategy	= sysctl_ipc_data,
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "auto_msgmni",
+		.data		= &init_ipc_ns.auto_msgmni,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_ipcauto_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &one,
+	},
 	{}
 };
 
diff --git a/ipc/ipcns_notifier.c b/ipc/ipcns_notifier.c
index 70ff09183f7..b9b31a4f77e 100644
--- a/ipc/ipcns_notifier.c
+++ b/ipc/ipcns_notifier.c
@@ -55,25 +55,35 @@ static int ipcns_callback(struct notifier_block *self,
 
 int register_ipcns_notifier(struct ipc_namespace *ns)
 {
+	int rc;
+
 	memset(&ns->ipcns_nb, 0, sizeof(ns->ipcns_nb));
 	ns->ipcns_nb.notifier_call = ipcns_callback;
 	ns->ipcns_nb.priority = IPCNS_CALLBACK_PRI;
-	return blocking_notifier_chain_register(&ipcns_chain, &ns->ipcns_nb);
+	rc = blocking_notifier_chain_register(&ipcns_chain, &ns->ipcns_nb);
+	if (!rc)
+		ns->auto_msgmni = 1;
+	return rc;
 }
 
 int cond_register_ipcns_notifier(struct ipc_namespace *ns)
 {
+	int rc;
+
 	memset(&ns->ipcns_nb, 0, sizeof(ns->ipcns_nb));
 	ns->ipcns_nb.notifier_call = ipcns_callback;
 	ns->ipcns_nb.priority = IPCNS_CALLBACK_PRI;
-	return blocking_notifier_chain_cond_register(&ipcns_chain,
+	rc = blocking_notifier_chain_cond_register(&ipcns_chain,
 							&ns->ipcns_nb);
+	if (!rc)
+		ns->auto_msgmni = 1;
+	return rc;
 }
 
-int unregister_ipcns_notifier(struct ipc_namespace *ns)
+void unregister_ipcns_notifier(struct ipc_namespace *ns)
 {
-	return blocking_notifier_chain_unregister(&ipcns_chain,
-						&ns->ipcns_nb);
+	blocking_notifier_chain_unregister(&ipcns_chain, &ns->ipcns_nb);
+	ns->auto_msgmni = 0;
 }
 
 int ipcns_notify(unsigned long val)
-- 
cgit v1.2.3


From 7833351b5260b3a58b54a0c2e7065001d986d749 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:48:09 -0700
Subject: pty: remove unused UNIX98_PTY_COUNT options

The h8300 and sparc options somehow survived when the code stopped using
CONFIG_UNIX98_PTY_COUNT.

Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/h8300/Kconfig | 14 --------------
 arch/sparc/Kconfig | 14 --------------
 2 files changed, 28 deletions(-)

diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 085dc6ec152..396ab059efa 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -203,20 +203,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 source "drivers/char/pcmcia/Kconfig"
 
 source "drivers/serial/Kconfig"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 789724e61e8..375de7c6d08 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -298,20 +298,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 endmenu
 
 source "fs/Kconfig"
-- 
cgit v1.2.3


From 79885b227740b9c7d3057f2de556f4098d37cc8f Mon Sep 17 00:00:00 2001
From: "Edgar E. Iglesias" <edgar.iglesias@axis.com>
Date: Fri, 25 Jul 2008 01:48:10 -0700
Subject: elf: use ELF_CORE_EFLAGS for kcore ELF header flags

ELF_CORE_EFLAGS is already used by the binfmt_elf coredumper to set correct
arch specific ELF header flags on coredumps.  Use it for kcore dumps as well.
At the moment, this affects the CRIS and the H8300 arch.

Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/kcore.c         | 10 +++++-----
 include/asm-h8300/elf.h |  4 ++--
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index e78c81fcf54..c2370c76fb7 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -23,6 +23,10 @@
 
 #define CORE_STR "CORE"
 
+#ifndef ELF_CORE_EFLAGS
+#define ELF_CORE_EFLAGS	0
+#endif
+
 static int open_kcore(struct inode * inode, struct file * filp)
 {
 	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
@@ -164,11 +168,7 @@ static void elf_kcore_store_hdr(char *bufp, int nphdr, int dataoff)
 	elf->e_entry	= 0;
 	elf->e_phoff	= sizeof(struct elfhdr);
 	elf->e_shoff	= 0;
-#if defined(CONFIG_H8300)
-	elf->e_flags	= ELF_FLAGS;
-#else
-	elf->e_flags	= 0;
-#endif
+	elf->e_flags	= ELF_CORE_EFLAGS;
 	elf->e_ehsize	= sizeof(struct elfhdr);
 	elf->e_phentsize= sizeof(struct elf_phdr);
 	elf->e_phnum	= nphdr;
diff --git a/include/asm-h8300/elf.h b/include/asm-h8300/elf.h
index 26bfc7e641d..a8b57d1f412 100644
--- a/include/asm-h8300/elf.h
+++ b/include/asm-h8300/elf.h
@@ -26,10 +26,10 @@ typedef unsigned long elf_fpregset_t;
 #define ELF_DATA	ELFDATA2MSB
 #define ELF_ARCH	EM_H8_300
 #if defined(__H8300H__)
-#define ELF_FLAGS       0x810000
+#define ELF_CORE_EFLAGS 0x810000
 #endif
 #if defined(__H8300S__)
-#define ELF_FLAGS       0x820000
+#define ELF_CORE_EFLAGS 0x820000
 #endif
 
 #define ELF_PLAT_INIT(_r)	_r->er1 = 0
-- 
cgit v1.2.3


From 8d1e120f695e9bcf01585e052577dc1e099033f9 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:48:11 -0700
Subject: proper extern for mwave_s_mdd

This patch adds a proper extern for mwave_s_mdd in
drivers/char/mwave/mwavedd.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mwave/mwavedd.h | 2 ++
 drivers/char/mwave/tp3780i.c | 2 --
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/mwave/mwavedd.h b/drivers/char/mwave/mwavedd.h
index 8eca61e0a19..7e0d530e2e0 100644
--- a/drivers/char/mwave/mwavedd.h
+++ b/drivers/char/mwave/mwavedd.h
@@ -147,4 +147,6 @@ typedef struct _MWAVE_DEVICE_DATA {
 
 } MWAVE_DEVICE_DATA, *pMWAVE_DEVICE_DATA;
 
+extern MWAVE_DEVICE_DATA mwave_s_mdd;
+
 #endif
diff --git a/drivers/char/mwave/tp3780i.c b/drivers/char/mwave/tp3780i.c
index f282976daaa..c6896970806 100644
--- a/drivers/char/mwave/tp3780i.c
+++ b/drivers/char/mwave/tp3780i.c
@@ -57,8 +57,6 @@
 #include "3780i.h"
 #include "mwavepub.h"
 
-extern MWAVE_DEVICE_DATA mwave_s_mdd;
-
 static unsigned short s_ausThinkpadIrqToField[16] =
 	{ 0xFFFF, 0xFFFF, 0xFFFF, 0x0001, 0x0002, 0x0003, 0xFFFF, 0x0004,
 	0xFFFF, 0xFFFF, 0x0005, 0x0006, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007 };
-- 
cgit v1.2.3


From 372572e9b1dcc5e36091199be63766d13e5a8ae0 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:48:11 -0700
Subject: #if 0 hpet_unregister()

This patch #if 0's the unused hpet_unregister().

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/hpet.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index fb0a85a1eb3..b3f5dbc6d88 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -623,6 +623,7 @@ static inline int hpet_tpcheck(struct hpet_task *tp)
 	return -ENXIO;
 }
 
+#if 0
 int hpet_unregister(struct hpet_task *tp)
 {
 	struct hpet_dev *devp;
@@ -652,6 +653,7 @@ int hpet_unregister(struct hpet_task *tp)
 
 	return 0;
 }
+#endif  /*  0  */
 
 static ctl_table hpet_table[] = {
 	{
-- 
cgit v1.2.3


From 76528a42e2c5199a1208909318a9c9948d25d0b7 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 25 Jul 2008 01:48:12 -0700
Subject: efirtc: push down the BKL

Push it down as far as the EFI method calls.  Someone who knows EFI can do
the other bits.  Also fix another wrong unknown ioctl return.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/efirtc.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
index d57ca3e4e53..67fbd7aab5d 100644
--- a/drivers/char/efirtc.c
+++ b/drivers/char/efirtc.c
@@ -37,8 +37,9 @@
 #include <linux/rtc.h>
 #include <linux/proc_fs.h>
 #include <linux/efi.h>
+#include <linux/smp_lock.h>
+#include <linux/uaccess.h>
 
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 #define EFI_RTC_VERSION		"0.4"
@@ -51,8 +52,8 @@
 
 static DEFINE_SPINLOCK(efi_rtc_lock);
 
-static int efi_rtc_ioctl(struct inode *inode, struct file *file,
-		     unsigned int cmd, unsigned long arg);
+static long efi_rtc_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg);
 
 #define is_leap(year) \
           ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
@@ -146,9 +147,8 @@ convert_from_efi_time(efi_time_t *eft, struct rtc_time *wtime)
 	}
 }
 
-static int
-efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long efi_rtc_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 
 	efi_status_t	status;
@@ -175,13 +175,13 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			return -EINVAL;
 
 		case RTC_RD_TIME:
-
+			lock_kernel();
 			spin_lock_irqsave(&efi_rtc_lock, flags);
 
 			status = efi.get_time(&eft, &cap);
 
 			spin_unlock_irqrestore(&efi_rtc_lock,flags);
-
+			unlock_kernel();
 			if (status != EFI_SUCCESS) {
 				/* should never happen */
 				printk(KERN_ERR "efitime: can't read time\n");
@@ -203,11 +203,13 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 			convert_to_efi_time(&wtime, &eft);
 
+			lock_kernel();
 			spin_lock_irqsave(&efi_rtc_lock, flags);
 
 			status = efi.set_time(&eft);
 
 			spin_unlock_irqrestore(&efi_rtc_lock,flags);
+			unlock_kernel();
 
 			return status == EFI_SUCCESS ? 0 : -EINVAL;
 
@@ -223,6 +225,7 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 			convert_to_efi_time(&wtime, &eft);
 
+			lock_kernel();
 			spin_lock_irqsave(&efi_rtc_lock, flags);
 			/*
 			 * XXX Fixme:
@@ -233,16 +236,19 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			status = efi.set_wakeup_time((efi_bool_t)enabled, &eft);
 
 			spin_unlock_irqrestore(&efi_rtc_lock,flags);
+			unlock_kernel();
 
 			return status == EFI_SUCCESS ? 0 : -EINVAL;
 
 		case RTC_WKALM_RD:
 
+			lock_kernel();
 			spin_lock_irqsave(&efi_rtc_lock, flags);
 
 			status = efi.get_wakeup_time((efi_bool_t *)&enabled, (efi_bool_t *)&pending, &eft);
 
 			spin_unlock_irqrestore(&efi_rtc_lock,flags);
+			unlock_kernel();
 
 			if (status != EFI_SUCCESS) return -EINVAL;
 
@@ -256,7 +262,7 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			return copy_to_user(&ewp->time, &wtime,
 					    sizeof(struct rtc_time)) ? -EFAULT : 0;
 	}
-	return -EINVAL;
+	return -ENOTTY;
 }
 
 /*
@@ -265,8 +271,7 @@ efi_rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
  *	up things on a close.
  */
 
-static int
-efi_rtc_open(struct inode *inode, struct file *file)
+static int efi_rtc_open(struct inode *inode, struct file *file)
 {
 	/*
 	 * nothing special to do here
@@ -277,8 +282,7 @@ efi_rtc_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int
-efi_rtc_close(struct inode *inode, struct file *file)
+static int efi_rtc_close(struct inode *inode, struct file *file)
 {
 	return 0;
 }
@@ -289,13 +293,12 @@ efi_rtc_close(struct inode *inode, struct file *file)
 
 static const struct file_operations efi_rtc_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= efi_rtc_ioctl,
+	.unlocked_ioctl	= efi_rtc_ioctl,
 	.open		= efi_rtc_open,
 	.release	= efi_rtc_close,
 };
 
-static struct miscdevice efi_rtc_dev=
-{
+static struct miscdevice efi_rtc_dev= {
 	EFI_RTC_MINOR,
 	"efirtc",
 	&efi_rtc_fops
-- 
cgit v1.2.3


From 47be36a24defbd19aea1354c416ec99f291c7ab8 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 25 Jul 2008 01:48:13 -0700
Subject: ip2: push BKL down for the firmware interface

(The tty side is already done)

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ip2/ip2main.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 9cb48fcd316..689f9dcd3b8 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -203,7 +203,7 @@ static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
 
 static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *);
 static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *);
-static int ip2_ipl_ioctl(struct inode *, struct file *, UINT, ULONG);
+static long ip2_ipl_ioctl(struct file *, UINT, ULONG);
 static int ip2_ipl_open(struct inode *, struct file *);
 
 static int DumpTraceBuffer(char __user *, int);
@@ -236,7 +236,7 @@ static const struct file_operations ip2_ipl = {
 	.owner		= THIS_MODULE,
 	.read		= ip2_ipl_read,
 	.write		= ip2_ipl_write,
-	.ioctl		= ip2_ipl_ioctl,
+	.unlocked_ioctl	= ip2_ipl_ioctl,
 	.open		= ip2_ipl_open,
 }; 
 
@@ -2845,10 +2845,10 @@ ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t
 /*                                                                            */
 /*                                                                            */
 /******************************************************************************/
-static int
-ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
+static long
+ip2_ipl_ioctl (struct file *pFile, UINT cmd, ULONG arg )
 {
-	unsigned int iplminor = iminor(pInode);
+	unsigned int iplminor = iminor(pFile->f_path.dentry->d_inode);
 	int rc = 0;
 	void __user *argp = (void __user *)arg;
 	ULONG __user *pIndex = argp;
@@ -2859,6 +2859,8 @@ ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
 	printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg );
 #endif
 
+	lock_kernel();
+
 	switch ( iplminor ) {
 	case 0:	    // IPL device
 		rc = -EINVAL;
@@ -2919,6 +2921,7 @@ ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
 		rc = -ENODEV;
 		break;
 	}
+	unlock_kernel();
 	return rc;
 }
 
-- 
cgit v1.2.3


From 909d145f0decbc4f17955e1fc4122a669a51fbc0 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 25 Jul 2008 01:48:14 -0700
Subject: mwave: ioctl BKL pushdown

Push the BKL down to the point it wraps the actual mwave method handlers

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mwave/mwavedd.c | 39 ++++++++++++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 11 deletions(-)

diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c
index 50243fcd87e..4f8d67fed29 100644
--- a/drivers/char/mwave/mwavedd.c
+++ b/drivers/char/mwave/mwavedd.c
@@ -86,8 +86,8 @@ module_param(mwave_uart_io, int, 0);
 
 static int mwave_open(struct inode *inode, struct file *file);
 static int mwave_close(struct inode *inode, struct file *file);
-static int mwave_ioctl(struct inode *inode, struct file *filp,
-                       unsigned int iocmd, unsigned long ioarg);
+static long mwave_ioctl(struct file *filp, unsigned int iocmd,
+							unsigned long ioarg);
 
 MWAVE_DEVICE_DATA mwave_s_mdd;
 
@@ -119,16 +119,16 @@ static int mwave_close(struct inode *inode, struct file *file)
 	return retval;
 }
 
-static int mwave_ioctl(struct inode *inode, struct file *file,
-                       unsigned int iocmd, unsigned long ioarg)
+static long mwave_ioctl(struct file *file, unsigned int iocmd,
+							unsigned long ioarg)
 {
 	unsigned int retval = 0;
 	pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
 	void __user *arg = (void __user *)ioarg;
 
-	PRINTK_5(TRACE_MWAVE,
-		"mwavedd::mwave_ioctl, entry inode %p file %p cmd %x arg %x\n",
-		 inode,  file, iocmd, (int) ioarg);
+	PRINTK_4(TRACE_MWAVE,
+		"mwavedd::mwave_ioctl, entry file %p cmd %x arg %x\n",
+		file, iocmd, (int) ioarg);
 
 	switch (iocmd) {
 
@@ -136,7 +136,9 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 			PRINTK_1(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
 				" calling tp3780I_ResetDSP\n");
+			lock_kernel();
 			retval = tp3780I_ResetDSP(&pDrvData->rBDData);
+			unlock_kernel();
 			PRINTK_2(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
 				" retval %x from tp3780I_ResetDSP\n",
@@ -147,7 +149,9 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 			PRINTK_1(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
 				" calling tp3780I_StartDSP\n");
+			lock_kernel();
 			retval = tp3780I_StartDSP(&pDrvData->rBDData);
+			unlock_kernel();
 			PRINTK_2(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
 				" retval %x from tp3780I_StartDSP\n",
@@ -161,8 +165,10 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				"mwavedd::mwave_ioctl,"
 				" IOCTL_MW_DSP_ABILITIES calling"
 				" tp3780I_QueryAbilities\n");
+			lock_kernel();
 			retval = tp3780I_QueryAbilities(&pDrvData->rBDData,
 					&rAbilities);
+			unlock_kernel();
 			PRINTK_2(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
 				" retval %x from tp3780I_QueryAbilities\n",
@@ -193,11 +199,13 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				"mwavedd::mwave_ioctl IOCTL_MW_READ_DATA,"
 				" size %lx, ioarg %lx pusBuffer %p\n",
 				rReadData.ulDataLength, ioarg, pusBuffer);
+			lock_kernel();
 			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
 					iocmd,
 					pusBuffer,
 					rReadData.ulDataLength,
 					rReadData.usDspAddress);
+			unlock_kernel();
 		}
 			break;
 	
@@ -215,10 +223,12 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				" size %lx, ioarg %lx pusBuffer %p\n",
 				rReadData.ulDataLength / 2, ioarg,
 				pusBuffer);
+			lock_kernel();
 			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
 				iocmd, pusBuffer,
 				rReadData.ulDataLength / 2,
 				rReadData.usDspAddress);
+			unlock_kernel();
 		}
 			break;
 	
@@ -236,10 +246,12 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				" size %lx, ioarg %lx pusBuffer %p\n",
 				rWriteData.ulDataLength, ioarg,
 				pusBuffer);
+			lock_kernel();
 			retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
 					iocmd, pusBuffer,
 					rWriteData.ulDataLength,
 					rWriteData.usDspAddress);
+			unlock_kernel();
 		}
 			break;
 	
@@ -257,10 +269,12 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				" size %lx, ioarg %lx pusBuffer %p\n",
 				rWriteData.ulDataLength, ioarg,
 				pusBuffer);
+			lock_kernel();
 			retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData,
 					iocmd, pusBuffer,
 					rWriteData.ulDataLength,
 					rWriteData.usDspAddress);
+			unlock_kernel();
 		}
 			break;
 	
@@ -281,8 +295,10 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 						ipcnum);
 				return -EINVAL;
 			}
+			lock_kernel();
 			pDrvData->IPCs[ipcnum].bIsHere = FALSE;
 			pDrvData->IPCs[ipcnum].bIsEnabled = TRUE;
+			unlock_kernel();
 	
 			PRINTK_2(TRACE_MWAVE,
 				"mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
@@ -307,6 +323,7 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				return -EINVAL;
 			}
 	
+			lock_kernel();
 			if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
 				DECLARE_WAITQUEUE(wait, current);
 
@@ -347,6 +364,7 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 					" processing\n",
 					ipcnum);
 			}
+			unlock_kernel();
 		}
 			break;
 	
@@ -365,19 +383,18 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 						ipcnum);
 				return -EINVAL;
 			}
+			lock_kernel();
 			if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
 				pDrvData->IPCs[ipcnum].bIsEnabled = FALSE;
 				if (pDrvData->IPCs[ipcnum].bIsHere == TRUE) {
 					wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue);
 				}
 			}
+			unlock_kernel();
 		}
 			break;
 	
 		default:
-			PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_ioctl:"
-					" Error: Unrecognized iocmd %x\n",
-					iocmd);
 			return -ENOTTY;
 			break;
 	} /* switch */
@@ -460,7 +477,7 @@ static const struct file_operations mwave_fops = {
 	.owner		= THIS_MODULE,
 	.read		= mwave_read,
 	.write		= mwave_write,
-	.ioctl		= mwave_ioctl,
+	.unlocked_ioctl	= mwave_ioctl,
 	.open		= mwave_open,
 	.release	= mwave_close
 };
-- 
cgit v1.2.3


From f6759fdcfd79ff1827fd5d4ddfe876164466d30d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 25 Jul 2008 01:48:14 -0700
Subject: rio: push down the BKL into the firmware ioctl handler

TTY side is already done.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/rio/rio_linux.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index 0cdfee15291..a8f68a3f14d 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -179,7 +179,7 @@ static int rio_set_real_termios(void *ptr);
 static void rio_hungup(void *ptr);
 static void rio_close(void *ptr);
 static int rio_chars_in_buffer(void *ptr);
-static int rio_fw_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg);
+static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
 static int rio_init_drivers(void);
 
 static void my_hd(void *addr, int len);
@@ -240,7 +240,7 @@ static struct real_driver rio_real_driver = {
 
 static const struct file_operations rio_fw_fops = {
 	.owner = THIS_MODULE,
-	.ioctl = rio_fw_ioctl,
+	.unlocked_ioctl = rio_fw_ioctl,
 };
 
 static struct miscdevice rio_fw_device = {
@@ -560,13 +560,15 @@ static void rio_close(void *ptr)
 
 
 
-static int rio_fw_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	int rc = 0;
 	func_enter();
 
 	/* The "dev" argument isn't used. */
+	lock_kernel();
 	rc = riocontrol(p, 0, cmd, arg, capable(CAP_SYS_ADMIN));
+	unlock_kernel();
 
 	func_exit();
 	return rc;
-- 
cgit v1.2.3


From 11af7478addd34c42999b3b84095903ed9e67038 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 25 Jul 2008 01:48:15 -0700
Subject: sx: push BKL down into the firmware ioctl handler

Also fix the capability checking for firmware load.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/sx.c | 73 ++++++++++++++++++++++++++++++++-----------------------
 1 file changed, 43 insertions(+), 30 deletions(-)

diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 2162439bbe4..c385206f9db 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -286,8 +286,8 @@ static void sx_close(void *ptr);
 static int sx_chars_in_buffer(void *ptr);
 static int sx_init_board(struct sx_board *board);
 static int sx_init_portstructs(int nboards, int nports);
-static int sx_fw_ioctl(struct inode *inode, struct file *filp,
-		unsigned int cmd, unsigned long arg);
+static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
+						unsigned long arg);
 static int sx_init_drivers(void);
 
 static struct tty_driver *sx_driver;
@@ -396,7 +396,7 @@ static struct real_driver sx_real_driver = {
 
 static const struct file_operations sx_fw_fops = {
 	.owner = THIS_MODULE,
-	.ioctl = sx_fw_ioctl,
+	.unlocked_ioctl = sx_fw_ioctl,
 };
 
 static struct miscdevice sx_fw_device = {
@@ -1686,10 +1686,10 @@ static int do_memtest_w(struct sx_board *board, int min, int max)
 }
 #endif
 
-static int sx_fw_ioctl(struct inode *inode, struct file *filp,
-		unsigned int cmd, unsigned long arg)
+static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
+							unsigned long arg)
 {
-	int rc = 0;
+	long rc = 0;
 	int __user *descr = (int __user *)arg;
 	int i;
 	static struct sx_board *board = NULL;
@@ -1699,13 +1699,10 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 
 	func_enter();
 
-#if 0
-	/* Removed superuser check: Sysops can use the permissions on the device
-	   file to restrict access. Recommendation: Root only. (root.root 600) */
-	if (!capable(CAP_SYS_ADMIN)) {
+	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
-	}
-#endif
+
+	lock_kernel();
 
 	sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg);
 
@@ -1720,19 +1717,23 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 		for (i = 0; i < SX_NBOARDS; i++)
 			sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
 		sx_dprintk(SX_DEBUG_FIRMWARE, "\n");
+		unlock_kernel();
 		return -EIO;
 	}
 
 	switch (cmd) {
 	case SXIO_SET_BOARD:
 		sx_dprintk(SX_DEBUG_FIRMWARE, "set board to %ld\n", arg);
+		rc = -EIO;
 		if (arg >= SX_NBOARDS)
-			return -EIO;
+			break;
 		sx_dprintk(SX_DEBUG_FIRMWARE, "not out of range\n");
 		if (!(boards[arg].flags & SX_BOARD_PRESENT))
-			return -EIO;
+			break;
 		sx_dprintk(SX_DEBUG_FIRMWARE, ".. and present!\n");
 		board = &boards[arg];
+		rc = 0;
+		/* FIXME: And this does ... nothing?? */
 		break;
 	case SXIO_GET_TYPE:
 		rc = -ENOENT;	/* If we manage to miss one, return error. */
@@ -1746,7 +1747,7 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 			rc = SX_TYPE_SI;
 		if (IS_EISA_BOARD(board))
 			rc = SX_TYPE_SI;
-		sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %d\n", rc);
+		sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc);
 		break;
 	case SXIO_DO_RAMTEST:
 		if (sx_initialized)	/* Already initialized: better not ramtest the board.  */
@@ -1760,19 +1761,26 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 			rc = do_memtest(board, 0, 0x7ff8);
 			/* if (!rc) rc = do_memtest_w (board, 0, 0x7ff8); */
 		}
-		sx_dprintk(SX_DEBUG_FIRMWARE, "returning memtest result= %d\n",
-			   rc);
+		sx_dprintk(SX_DEBUG_FIRMWARE,
+				"returning memtest result= %ld\n", rc);
 		break;
 	case SXIO_DOWNLOAD:
-		if (sx_initialized)	/* Already initialized */
-			return -EEXIST;
-		if (!sx_reset(board))
-			return -EIO;
+		if (sx_initialized) {/* Already initialized */
+			rc = -EEXIST;
+			break;
+		}
+		if (!sx_reset(board)) {
+			rc = -EIO;
+			break;
+		}
 		sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
 
 		tmp = kmalloc(SX_CHUNK_SIZE, GFP_USER);
-		if (!tmp)
-			return -ENOMEM;
+		if (!tmp) {
+			rc = -ENOMEM;
+			break;
+		}
+		/* FIXME: check returns */
 		get_user(nbytes, descr++);
 		get_user(offset, descr++);
 		get_user(data, descr++);
@@ -1782,7 +1790,8 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 						(i + SX_CHUNK_SIZE > nbytes) ?
 						nbytes - i : SX_CHUNK_SIZE)) {
 					kfree(tmp);
-					return -EFAULT;
+					rc = -EFAULT;
+					break;
 				}
 				memcpy_toio(board->base2 + offset + i, tmp,
 						(i + SX_CHUNK_SIZE > nbytes) ?
@@ -1798,13 +1807,17 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 		rc = sx_nports;
 		break;
 	case SXIO_INIT:
-		if (sx_initialized)	/* Already initialized */
-			return -EEXIST;
+		if (sx_initialized) {	/* Already initialized */
+			rc = -EEXIST;
+			break;
+		}
 		/* This is not allowed until all boards are initialized... */
 		for (i = 0; i < SX_NBOARDS; i++) {
 			if ((boards[i].flags & SX_BOARD_PRESENT) &&
-				!(boards[i].flags & SX_BOARD_INITIALIZED))
-				return -EIO;
+				!(boards[i].flags & SX_BOARD_INITIALIZED)) {
+				rc = -EIO;
+				break;
+			}
 		}
 		for (i = 0; i < SX_NBOARDS; i++)
 			if (!(boards[i].flags & SX_BOARD_PRESENT))
@@ -1832,10 +1845,10 @@ static int sx_fw_ioctl(struct inode *inode, struct file *filp,
 		rc = sx_nports;
 		break;
 	default:
-		printk(KERN_WARNING "Unknown ioctl on firmware device (%x).\n",
-				cmd);
+		rc = -ENOTTY;
 		break;
 	}
+	unlock_kernel();
 	func_exit();
 	return rc;
 }
-- 
cgit v1.2.3


From e05e9f7c4aeb82eaa23e46b29580ff514590c641 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 25 Jul 2008 01:48:16 -0700
Subject: ixj: push BKL into driver and wrap ioctls

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/telephony/ixj.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index 49cd9793404..ec7aeb502d1 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -6095,15 +6095,15 @@ static int capabilities_check(IXJ *j, struct phone_capability *pcreq)
 	return retval;
 }
 
-static int ixj_ioctl(struct inode *inode, struct file *file_p, unsigned int cmd, unsigned long arg)
+static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long arg)
 {
 	IXJ_TONE ti;
 	IXJ_FILTER jf;
 	IXJ_FILTER_RAW jfr;
 	void __user *argp = (void __user *)arg;
-
-	unsigned int raise, mant;
+	struct inode *inode = file_p->f_path.dentry->d_inode;
 	unsigned int minor = iminor(inode);
+	unsigned int raise, mant;
 	int board = NUM(inode);
 
 	IXJ *j = get_ixj(NUM(inode));
@@ -6661,6 +6661,15 @@ static int ixj_ioctl(struct inode *inode, struct file *file_p, unsigned int cmd,
 	return retval;
 }
 
+static long ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long arg)
+{
+	long ret;
+	lock_kernel();
+	ret = do_ixj_ioctl(file_p, cmd, arg);
+	unlock_kernel();
+	return ret;
+}
+
 static int ixj_fasync(int fd, struct file *file_p, int mode)
 {
 	IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
@@ -6674,7 +6683,7 @@ static const struct file_operations ixj_fops =
         .read           = ixj_enhanced_read,
         .write          = ixj_enhanced_write,
         .poll           = ixj_poll,
-        .ioctl          = ixj_ioctl,
+        .unlocked_ioctl = ixj_ioctl,
         .release        = ixj_release,
         .fasync         = ixj_fasync
 };
-- 
cgit v1.2.3


From 6d535d3e6ad395345750c361bd2b7f1b9429455d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 25 Jul 2008 01:48:16 -0700
Subject: ppdev: wrap ioctl handler in driver and push lock down

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ppdev.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index 7af7a7e6b9c..bee39fdfba7 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -67,7 +67,7 @@
 #include <linux/major.h>
 #include <linux/ppdev.h>
 #include <linux/smp_lock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #define PP_VERSION "ppdev: user-space parallel port driver"
 #define CHRDEV "ppdev"
@@ -328,10 +328,9 @@ static enum ieee1284_phase init_phase (int mode)
 	return IEEE1284_PH_FWD_IDLE;
 }
 
-static int pp_ioctl(struct inode *inode, struct file *file,
-		    unsigned int cmd, unsigned long arg)
+static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	unsigned int minor = iminor(inode);
+	unsigned int minor = iminor(file->f_path.dentry->d_inode);
 	struct pp_struct *pp = file->private_data;
 	struct parport * port;
 	void __user *argp = (void __user *)arg;
@@ -634,6 +633,15 @@ static int pp_ioctl(struct inode *inode, struct file *file,
 	return 0;
 }
 
+static long pp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	long ret;
+	lock_kernel();
+	ret = pp_do_ioctl(file, cmd, arg);
+	unlock_kernel();
+	return ret;
+}
+
 static int pp_open (struct inode * inode, struct file * file)
 {
 	unsigned int minor = iminor(inode);
@@ -745,7 +753,7 @@ static const struct file_operations pp_fops = {
 	.read		= pp_read,
 	.write		= pp_write,
 	.poll		= pp_poll,
-	.ioctl		= pp_ioctl,
+	.unlocked_ioctl	= pp_ioctl,
 	.open		= pp_open,
 	.release	= pp_release,
 };
-- 
cgit v1.2.3


From b8e35919653d76e7dceb8d3b8569c4ec1004d546 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 25 Jul 2008 01:48:17 -0700
Subject: ds1302: push down the BKL into the driver ioctl code

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ds1302.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/char/ds1302.c b/drivers/char/ds1302.c
index fada6ddefba..c5e67a62395 100644
--- a/drivers/char/ds1302.c
+++ b/drivers/char/ds1302.c
@@ -20,10 +20,11 @@
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
 #include <linux/bcd.h>
+#include <linux/smp_lock.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
 
-#include <asm/uaccess.h>
 #include <asm/system.h>
-#include <asm/io.h>
 #include <asm/rtc.h>
 #if defined(CONFIG_M32R)
 #include <asm/m32r.h>
@@ -153,9 +154,7 @@ static unsigned char days_in_mo[] =
 
 /* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
 
-static int
-rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
 
@@ -165,7 +164,9 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			struct rtc_time rtc_tm;
 
 			memset(&rtc_tm, 0, sizeof (struct rtc_time));
+			lock_kernel();
 			get_rtc_time(&rtc_tm);
+			unlock_kernel();
 			if (copy_to_user((struct rtc_time*)arg, &rtc_tm, sizeof(struct rtc_time)))
 				return -EFAULT;
 			return 0;
@@ -217,6 +218,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			BIN_TO_BCD(mon);
 			BIN_TO_BCD(yrs);
 
+			lock_kernel();
 			local_irq_save(flags);
 			CMOS_WRITE(yrs, RTC_YEAR);
 			CMOS_WRITE(mon, RTC_MONTH);
@@ -225,6 +227,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			CMOS_WRITE(min, RTC_MINUTES);
 			CMOS_WRITE(sec, RTC_SECONDS);
 			local_irq_restore(flags);
+			unlock_kernel();
 
 			/* Notice that at this point, the RTC is updated but
 			 * the kernel is still running with the old time.
@@ -244,8 +247,10 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			if(copy_from_user(&tcs_val, (int*)arg, sizeof(int)))
 				return -EFAULT;
 
+			lock_kernel();
 			tcs_val = RTC_TCR_PATTERN | (tcs_val & 0x0F);
 			ds1302_writereg(RTC_TRICKLECHARGER, tcs_val);
+			unlock_kernel();
 			return 0;
 		}
 		default:
@@ -282,7 +287,7 @@ get_rtc_status(char *buf)
 
 static const struct file_operations rtc_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= rtc_ioctl,
+	.unlocked_ioctl	= rtc_ioctl,
 };
 
 /* Probe for the chip by writing something to its RAM and try reading it back. */
-- 
cgit v1.2.3


From 236b8756a2b6f90498d45b2c36d43e5372f2d4b8 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 25 Jul 2008 01:48:17 -0700
Subject: dsp56k: BKL pushdown

Push the BKL down into the driver ioctl methods

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/dsp56k.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c
index 33c466a4888..19b88504e96 100644
--- a/drivers/char/dsp56k.c
+++ b/drivers/char/dsp56k.c
@@ -36,10 +36,10 @@
 #include <linux/smp_lock.h>
 #include <linux/firmware.h>
 #include <linux/platform_device.h>
+#include <linux/uaccess.h>	/* For put_user and get_user */
 
 #include <asm/atarihw.h>
 #include <asm/traps.h>
-#include <asm/uaccess.h>	/* For put_user and get_user */
 
 #include <asm/dsp56k.h>
 
@@ -303,8 +303,8 @@ static ssize_t dsp56k_write(struct file *file, const char __user *buf, size_t co
 	}
 }
 
-static int dsp56k_ioctl(struct inode *inode, struct file *file,
-			unsigned int cmd, unsigned long arg)
+static long dsp56k_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	int dev = iminor(inode) & 0x0f;
 	void __user *argp = (void __user *)arg;
@@ -331,8 +331,9 @@ static int dsp56k_ioctl(struct inode *inode, struct file *file,
 			if (len > DSP56K_MAX_BINARY_LENGTH) {
 				return -EINVAL;
 			}
-    
+			lock_kernel();
 			r = dsp56k_upload(bin, len);
+			unlock_kernel();
 			if (r < 0) {
 				return r;
 			}
@@ -342,12 +343,16 @@ static int dsp56k_ioctl(struct inode *inode, struct file *file,
 		case DSP56K_SET_TX_WSIZE:
 			if (arg > 4 || arg < 1)
 				return -EINVAL;
+			lock_kernel();
 			dsp56k.tx_wsize = (int) arg;
+			unlock_kernel();
 			break;
 		case DSP56K_SET_RX_WSIZE:
 			if (arg > 4 || arg < 1)
 				return -EINVAL;
+			lock_kernel();
 			dsp56k.rx_wsize = (int) arg;
+			unlock_kernel();
 			break;
 		case DSP56K_HOST_FLAGS:
 		{
@@ -359,6 +364,7 @@ static int dsp56k_ioctl(struct inode *inode, struct file *file,
 			if(get_user(out, &hf->out) < 0)
 				return -EFAULT;
 
+			lock_kernel();
 			if ((dir & 0x1) && (out & 0x1))
 				dsp56k_host_interface.icr |= DSP56K_ICR_HF0;
 			else if (dir & 0x1)
@@ -373,14 +379,16 @@ static int dsp56k_ioctl(struct inode *inode, struct file *file,
 			if (dsp56k_host_interface.icr & DSP56K_ICR_HF1) status |= 0x2;
 			if (dsp56k_host_interface.isr & DSP56K_ISR_HF2) status |= 0x4;
 			if (dsp56k_host_interface.isr & DSP56K_ISR_HF3) status |= 0x8;
-
+			unlock_kernel();
 			return put_user(status, &hf->status);
 		}
 		case DSP56K_HOST_CMD:
 			if (arg > 31 || arg < 0)
 				return -EINVAL;
+			lock_kernel();
 			dsp56k_host_interface.cvr = (u_char)((arg & DSP56K_CVR_HV_MASK) |
 							     DSP56K_CVR_HC);
+			unlock_kernel();
 			break;
 		default:
 			return -EINVAL;
@@ -472,7 +480,7 @@ static const struct file_operations dsp56k_fops = {
 	.owner		= THIS_MODULE,
 	.read		= dsp56k_read,
 	.write		= dsp56k_write,
-	.ioctl		= dsp56k_ioctl,
+	.unlocked_ioctl	= dsp56k_ioctl,
 	.open		= dsp56k_open,
 	.release	= dsp56k_release,
 };
-- 
cgit v1.2.3


From 6ee8928d94841aa764aeaf645ad16daff811dc26 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Fri, 25 Jul 2008 01:48:18 -0700
Subject: nwflash: use simple_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/nwflash.c | 31 ++++++++-----------------------
 1 file changed, 8 insertions(+), 23 deletions(-)

diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index ba012c2bdf7..f9f72a21129 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -122,35 +122,20 @@ static int flash_ioctl(struct inode *inodep, struct file *filep, unsigned int cm
 static ssize_t flash_read(struct file *file, char __user *buf, size_t size,
 			  loff_t *ppos)
 {
-	unsigned long p = *ppos;
-	unsigned int count = size;
-	int ret = 0;
+	ssize_t ret;
 
 	if (flashdebug)
 		printk(KERN_DEBUG "flash_read: flash_read: offset=0x%lX, "
 		       "buffer=%p, count=0x%X.\n", p, buf, count);
+	/*
+	 * We now lock against reads and writes. --rmk
+	 */
+	if (mutex_lock_interruptible(&nwflash_mutex))
+		return -ERESTARTSYS;
 
-	if (count)
-		ret = -ENXIO;
-
-	if (p < gbFlashSize) {
-		if (count > gbFlashSize - p)
-			count = gbFlashSize - p;
+	ret = simple_read_from_buffer(buf, size, ppos, FLASH_BASE, gbFlashSize);
+	mutex_unlock(&nwflash_mutex);
 
-		/*
-		 * We now lock against reads and writes. --rmk
-		 */
-		if (mutex_lock_interruptible(&nwflash_mutex))
-			return -ERESTARTSYS;
-
-		ret = copy_to_user(buf, (void *)(FLASH_BASE + p), count);
-		if (ret == 0) {
-			ret = count;
-			*ppos += count;
-		} else
-			ret = -EFAULT;
-		mutex_unlock(&nwflash_mutex);
-	}
 	return ret;
 }
 
-- 
cgit v1.2.3


From 41aee9a121fd0c31ae22dfe57e8f9ee9d6d85c25 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 25 Jul 2008 01:48:19 -0700
Subject: Char: mxser, ioctl cleanup

- remove break ctl from ioctl handler, it's never reached, since
  tty_ops->break_ctl is defined (mxser break handling is done in software)
- mark MOXA_GET_MAJOR as deprecated
- fix TIOCGICOUNT (some retval non-checks of put_user). Use copy_to_user
  to whole structure instead.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mxser.c | 42 +++++++++++++++++++-----------------------
 1 file changed, 19 insertions(+), 23 deletions(-)

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 4c756bbba94..e5029b149c5 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -16,7 +16,6 @@
  *	Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
  *	<alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
  *	- Fixed x86_64 cleanness
- *	- Fixed sleep with spinlock held in mxser_send_break
  */
 
 #include <linux/module.h>
@@ -1634,6 +1633,8 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
 	switch (cmd) {
 	case MOXA_GET_MAJOR:
+		printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl %x, fix "
+				"your userspace\n", current->comm, cmd);
 		return put_user(ttymajor, (int __user *)argp);
 
 	case MOXA_CHKPORTENABLE:
@@ -1804,7 +1805,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 {
 	struct mxser_port *info = tty->driver_data;
 	struct async_icount cnow;
-	struct serial_icounter_struct __user *p_cuser;
 	unsigned long flags;
 	void __user *argp = (void __user *)arg;
 	int retval;
@@ -1884,30 +1884,26 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 	 * NB: both 1->0 and 0->1 transitions are counted except for
 	 *     RI where only 0->1 is counted.
 	 */
-	case TIOCGICOUNT:
+	case TIOCGICOUNT: {
+		struct serial_icounter_struct icnt = { 0 };
 		spin_lock_irqsave(&info->slock, flags);
 		cnow = info->icount;
 		spin_unlock_irqrestore(&info->slock, flags);
-		p_cuser = argp;
-		if (put_user(cnow.frame, &p_cuser->frame))
-			return -EFAULT;
-		if (put_user(cnow.brk, &p_cuser->brk))
-			return -EFAULT;
-		if (put_user(cnow.overrun, &p_cuser->overrun))
-			return -EFAULT;
-		if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
-			return -EFAULT;
-		if (put_user(cnow.parity, &p_cuser->parity))
-			return -EFAULT;
-		if (put_user(cnow.rx, &p_cuser->rx))
-			return -EFAULT;
-		if (put_user(cnow.tx, &p_cuser->tx))
-			return -EFAULT;
-		put_user(cnow.cts, &p_cuser->cts);
-		put_user(cnow.dsr, &p_cuser->dsr);
-		put_user(cnow.rng, &p_cuser->rng);
-		put_user(cnow.dcd, &p_cuser->dcd);
-		return 0;
+
+		icnt.frame = cnow.frame;
+		icnt.brk = cnow.brk;
+		icnt.overrun = cnow.overrun;
+		icnt.buf_overrun = cnow.buf_overrun;
+		icnt.parity = cnow.parity;
+		icnt.rx = cnow.rx;
+		icnt.tx = cnow.tx;
+		icnt.cts = cnow.cts;
+		icnt.dsr = cnow.dsr;
+		icnt.rng = cnow.rng;
+		icnt.dcd = cnow.dcd;
+
+		return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
+	}
 	case MOXA_HighSpeedOn:
 		return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
 	case MOXA_SDS_RSTICOUNTER:
-- 
cgit v1.2.3


From 72800df9ba3199df02a95b3830c49fbf16ec4a6d Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 25 Jul 2008 01:48:20 -0700
Subject: Char: mxser, globals cleanup

- remove unused mxvar_diagflag
- move mxser_msr into the only user/function
- GMStatus, hmm, fix race-prone access to it. We need only one instance for
  real, not MXSER_PORTS. Move it to MOXA_GETMSTATUS ioctl.
- mxser_mon_ext, almost the same, but alloc it on heap, since it has more than
  2 kilos.
- fix indexing, `i' is not the index value, `i * MXSER_PORTS_PER_BOARD + j' is

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mxser.c | 130 ++++++++++++++++++++++-----------------------------
 1 file changed, 55 insertions(+), 75 deletions(-)

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index e5029b149c5..3d7f2a97049 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -286,8 +286,6 @@ struct mxser_mstatus {
 	int dcd;
 };
 
-static struct mxser_mstatus GMStatus[MXSER_PORTS];
-
 static int mxserBoardCAP[MXSER_BOARDS] = {
 	0, 0, 0, 0
 	/*  0x180, 0x280, 0x200, 0x320 */
@@ -296,9 +294,6 @@ static int mxserBoardCAP[MXSER_BOARDS] = {
 static struct mxser_board mxser_boards[MXSER_BOARDS];
 static struct tty_driver *mxvar_sdriver;
 static struct mxser_log mxvar_log;
-static int mxvar_diagflag;
-static unsigned char mxser_msr[MXSER_PORTS + 1];
-static struct mxser_mon_ext mon_data_ext;
 static int mxser_set_baud_method[MXSER_PORTS + 1];
 
 static void mxser_enable_must_enchance_mode(unsigned long baseio)
@@ -542,6 +537,7 @@ static void process_txrx_fifo(struct mxser_port *info)
 
 static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
 {
+	static unsigned char mxser_msr[MXSER_PORTS + 1];
 	unsigned char status = 0;
 
 	status = inb(baseaddr + UART_MSR);
@@ -1652,62 +1648,60 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 			ret = -EFAULT;
 		unlock_kernel();
 		return ret;
-	case MOXA_GETMSTATUS:
+	case MOXA_GETMSTATUS: {
+		struct mxser_mstatus ms, __user *msu = argp;
 		lock_kernel();
 		for (i = 0; i < MXSER_BOARDS; i++)
 			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
 				port = &mxser_boards[i].ports[j];
+				memset(&ms, 0, sizeof(ms));
 
-				GMStatus[i].ri = 0;
-				if (!port->ioaddr) {
-					GMStatus[i].dcd = 0;
-					GMStatus[i].dsr = 0;
-					GMStatus[i].cts = 0;
-					continue;
-				}
+				if (!port->ioaddr)
+					goto copy;
 
 				if (!port->port.tty || !port->port.tty->termios)
-					GMStatus[i].cflag =
-						port->normal_termios.c_cflag;
+					ms.cflag = port->normal_termios.c_cflag;
 				else
-					GMStatus[i].cflag =
-						port->port.tty->termios->c_cflag;
+					ms.cflag = port->port.tty->termios->c_cflag;
 
 				status = inb(port->ioaddr + UART_MSR);
-				if (status & 0x80 /*UART_MSR_DCD */ )
-					GMStatus[i].dcd = 1;
-				else
-					GMStatus[i].dcd = 0;
-
-				if (status & 0x20 /*UART_MSR_DSR */ )
-					GMStatus[i].dsr = 1;
-				else
-					GMStatus[i].dsr = 0;
-
-
-				if (status & 0x10 /*UART_MSR_CTS */ )
-					GMStatus[i].cts = 1;
-				else
-					GMStatus[i].cts = 0;
+				if (status & UART_MSR_DCD)
+					ms.dcd = 1;
+				if (status & UART_MSR_DSR)
+					ms.dsr = 1;
+				if (status & UART_MSR_CTS)
+					ms.cts = 1;
+			copy:
+				if (copy_to_user(msu, &ms, sizeof(ms))) {
+					unlock_kernel();
+					return -EFAULT;
+				}
+				msu++;
 			}
 		unlock_kernel();
-		if (copy_to_user(argp, GMStatus,
-				sizeof(struct mxser_mstatus) * MXSER_PORTS))
-			return -EFAULT;
 		return 0;
+	}
 	case MOXA_ASPP_MON_EXT: {
-		int p, shiftbit;
-		unsigned long opmode;
-		unsigned cflag, iflag;
+		struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */
+		unsigned int cflag, iflag, p;
+		u8 opmode;
+
+		me = kzalloc(sizeof(*me), GFP_KERNEL);
+		if (!me)
+			return -ENOMEM;
 
 		lock_kernel();
-		for (i = 0; i < MXSER_BOARDS; i++) {
-			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+		for (i = 0, p = 0; i < MXSER_BOARDS; i++) {
+			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) {
+				if (p >= ARRAY_SIZE(me->rx_cnt)) {
+					i = MXSER_BOARDS;
+					break;
+				}
 				port = &mxser_boards[i].ports[j];
 				if (!port->ioaddr)
 					continue;
 
-				status = mxser_get_msr(port->ioaddr, 0, i);
+				status = mxser_get_msr(port->ioaddr, 0, p);
 
 				if (status & UART_MSR_TERI)
 					port->icount.rng++;
@@ -1719,16 +1713,13 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 					port->icount.cts++;
 
 				port->mon_data.modem_status = status;
-				mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt;
-				mon_data_ext.tx_cnt[i] = port->mon_data.txcnt;
-				mon_data_ext.up_rxcnt[i] =
-					port->mon_data.up_rxcnt;
-				mon_data_ext.up_txcnt[i] =
-					port->mon_data.up_txcnt;
-				mon_data_ext.modem_status[i] =
+				me->rx_cnt[p] = port->mon_data.rxcnt;
+				me->tx_cnt[p] = port->mon_data.txcnt;
+				me->up_rxcnt[p] = port->mon_data.up_rxcnt;
+				me->up_txcnt[p] = port->mon_data.up_txcnt;
+				me->modem_status[p] =
 					port->mon_data.modem_status;
-				mon_data_ext.baudrate[i] =
-					tty_get_baud_rate(port->port.tty);
+				me->baudrate[p] = tty_get_baud_rate(port->port.tty);
 
 				if (!port->port.tty || !port->port.tty->termios) {
 					cflag = port->normal_termios.c_cflag;
@@ -1738,40 +1729,31 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 					iflag = port->port.tty->termios->c_iflag;
 				}
 
-				mon_data_ext.databits[i] = cflag & CSIZE;
-
-				mon_data_ext.stopbits[i] = cflag & CSTOPB;
-
-				mon_data_ext.parity[i] =
-					cflag & (PARENB | PARODD | CMSPAR);
-
-				mon_data_ext.flowctrl[i] = 0x00;
+				me->databits[p] = cflag & CSIZE;
+				me->stopbits[p] = cflag & CSTOPB;
+				me->parity[p] = cflag & (PARENB | PARODD |
+						CMSPAR);
 
 				if (cflag & CRTSCTS)
-					mon_data_ext.flowctrl[i] |= 0x03;
+					me->flowctrl[p] |= 0x03;
 
 				if (iflag & (IXON | IXOFF))
-					mon_data_ext.flowctrl[i] |= 0x0C;
+					me->flowctrl[p] |= 0x0C;
 
 				if (port->type == PORT_16550A)
-					mon_data_ext.fifo[i] = 1;
-				else
-					mon_data_ext.fifo[i] = 0;
+					me->fifo[p] = 1;
 
-				p = i % 4;
-				shiftbit = p * 2;
-				opmode = inb(port->opmode_ioaddr) >> shiftbit;
+				opmode = inb(port->opmode_ioaddr) >>
+						((p % 4) * 2);
 				opmode &= OP_MODE_MASK;
-
-				mon_data_ext.iftype[i] = opmode;
-
+				me->iftype[p] = opmode;
 			}
 		}
 		unlock_kernel();
-		if (copy_to_user(argp, &mon_data_ext,
-					sizeof(mon_data_ext)))
-			return -EFAULT;
-		return 0;
+		if (copy_to_user(argp, me, sizeof(*me)))
+			ret = -EFAULT;
+		kfree(me);
+		return ret;
 	}
 	default:
 		return -ENOIOCTLCMD;
@@ -2802,8 +2784,6 @@ static int __init mxser_module_init(void)
 		goto err_put;
 	}
 
-	mxvar_diagflag = 0;
-
 	m = 0;
 	/* Start finding ISA boards here */
 	for (isaloop = 0; isaloop < 2; isaloop++)
-- 
cgit v1.2.3


From 729f0edbecd0c59c82ee9bf92009acc7e984c425 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 25 Jul 2008 01:48:20 -0700
Subject: Char: mxser, update documentation

Update Documentation/moxa-smartio to the later document from the mxser
package.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/moxa-smartio | 392 +++++++++++++++++++++++++++++----------------
 1 file changed, 252 insertions(+), 140 deletions(-)

diff --git a/Documentation/moxa-smartio b/Documentation/moxa-smartio
index fe24ecc6372..5337e80a5b9 100644
--- a/Documentation/moxa-smartio
+++ b/Documentation/moxa-smartio
@@ -1,14 +1,22 @@
 =============================================================================
-
-	MOXA Smartio Family Device Driver Ver 1.1 Installation Guide
-		    for Linux Kernel 2.2.x and 2.0.3x
-	       Copyright (C) 1999, Moxa Technologies Co, Ltd.
+          MOXA Smartio/Industio Family Device Driver Installation Guide
+		    for Linux Kernel 2.4.x, 2.6.x
+	       Copyright (C) 2008, Moxa Inc.
 =============================================================================
+Date: 01/21/2008
+
 Content
 
 1. Introduction
 2. System Requirement
 3. Installation
+   3.1 Hardware installation
+   3.2 Driver files
+   3.3 Device naming convention
+   3.4 Module driver configuration
+   3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x.
+   3.6 Custom configuration
+   3.7 Verify driver installation
 4. Utilities
 5. Setserial
 6. Troubleshooting
@@ -16,27 +24,48 @@ Content
 -----------------------------------------------------------------------------
 1. Introduction
 
-   The Smartio family Linux driver, Ver. 1.1, supports following multiport
+   The Smartio/Industio/UPCI family Linux driver supports following multiport
    boards.
 
-    -C104P/H/HS, C104H/PCI, C104HS/PCI, CI-104J 4 port multiport board.
-    -C168P/H/HS, C168H/PCI 8 port multiport board.
-
-   This driver has been modified a little and cleaned up from the Moxa
-   contributed driver code and merged into Linux 2.2.14pre. In particular
-   official major/minor numbers have been assigned which are different to
-   those the original Moxa supplied driver used.
+    - 2 ports multiport board
+	CP-102U, CP-102UL, CP-102UF
+	CP-132U-I, CP-132UL,
+	CP-132, CP-132I, CP132S, CP-132IS,
+	CI-132, CI-132I, CI-132IS,
+	(C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
+
+    - 4 ports multiport board
+	CP-104EL,
+	CP-104UL, CP-104JU,
+	CP-134U, CP-134U-I,
+	C104H/PCI, C104HS/PCI,
+	CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL,
+	C104H, C104HS,
+	CI-104J, CI-104JS,
+	CI-134, CI-134I, CI-134IS,
+	(C114HI, CT-114I, C104P)
+	POS-104UL,
+	CB-114,
+	CB-134I
+
+    - 8 ports multiport board
+	CP-118EL, CP-168EL,
+	CP-118U, CP-168U,
+	C168H/PCI,
+	C168H, C168HS,
+	(C168P),
+	CB-108
 
    This driver and installation procedure have been developed upon Linux Kernel
-   2.2.5 and backward compatible to 2.0.3x. This driver supports Intel x86 and
-   Alpha hardware platform. In order to maintain compatibility, this version
-   has also been properly tested with RedHat, OpenLinux, TurboLinux and
-   S.u.S.E Linux. However, if compatibility problem occurs, please contact
-   Moxa at support@moxa.com.tw.
+   2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order
+   to maintain compatibility, this version has also been properly tested with
+   RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem
+   occurs, please contact Moxa at support@moxa.com.tw.
 
    In addition to device driver, useful utilities are also provided in this
    version. They are
-    - msdiag     Diagnostic program for detecting installed Moxa Smartio boards.
+    - msdiag     Diagnostic program for displaying installed Moxa
+                 Smartio/Industio boards.
     - msmon      Monitor program to observe data count and line status signals.
     - msterm     A simple terminal program which is useful in testing serial
 	         ports.
@@ -47,8 +76,7 @@ Content
    GNU General Public License in this version. Please refer to GNU General
    Public License announcement in each source code file for more detail.
 
-   In Moxa's ftp sites, you may always find latest driver at
-   ftp://ftp.moxa.com  or ftp://ftp.moxa.com.tw.
+   In Moxa's Web sites, you may always find latest driver at http://web.moxa.com.
 
    This version of driver can be installed as Loadable Module (Module driver)
    or built-in into kernel (Static driver). You may refer to following
@@ -61,18 +89,27 @@ Content
 
 -----------------------------------------------------------------------------
 2. System Requirement
-   - Hardware platform: Intel x86 or Alpha machine
-   - Kernel version: 2.0.3x or 2.2.x
+   - Hardware platform: Intel x86 machine
+   - Kernel version: 2.4.x or 2.6.x
    - gcc version 2.72 or later
    - Maximum 4 boards can be installed in combination
 
 -----------------------------------------------------------------------------
 3. Installation
 
+   3.1 Hardware installation
+   3.2 Driver files
+   3.3 Device naming convention
+   3.4 Module driver configuration
+   3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x.
+   3.6 Custom configuration
+   3.7 Verify driver installation
+
+
    3.1 Hardware installation
 
-       There are two types of buses, ISA and PCI, for Smartio family multiport
-       board.
+       There are two types of buses, ISA and PCI, for Smartio/Industio
+       family multiport board.
 
        ISA board
        ---------
@@ -81,47 +118,57 @@ Content
        installation procedure in User's Manual before proceed any further.
        Please make sure the JP1 is open after the ISA board is set properly.
 
-       PCI board
-       ---------
+       PCI/UPCI board
+       --------------
        You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict
        with other ISA devices. Please refer to hardware installation
        procedure in User's Manual in advance.
 
-       IRQ Sharing
+       PCI IRQ Sharing
        -----------
        Each port within the same multiport board shares the same IRQ. Up to
-       4 Moxa Smartio Family multiport boards can be installed together on
-       one system and they can share the same IRQ.
+       4 Moxa Smartio/Industio PCI Family multiport boards can be installed
+       together on one system and they can share the same IRQ.
+
 
-   3.2 Driver files and device naming convention
+   3.2 Driver files
 
        The driver file may be obtained from ftp, CD-ROM or floppy disk. The
        first step, anyway, is to copy driver file "mxser.tgz" into specified
        directory. e.g. /moxa. The execute commands as below.
 
+       # cd /
+       # mkdir moxa
        # cd /moxa
-       # tar xvf /dev/fd0 
+       # tar xvf /dev/fd0
+
        or
+
+       # cd /
+       # mkdir moxa
        # cd /moxa
        # cp /mnt/cdrom/<driver directory>/mxser.tgz .
        # tar xvfz mxser.tgz
 
+
+   3.3 Device naming convention
+
        You may find all the driver and utilities files in /moxa/mxser.
        Following installation procedure depends on the model you'd like to
-       run the driver. If you prefer module driver, please refer to 3.3.
-       If static driver is required, please refer to 3.4.
+       run the driver. If you prefer module driver, please refer to 3.4.
+       If static driver is required, please refer to 3.5.
 
        Dialin and callout port
        -----------------------
-       This driver remains traditional serial device properties. There're
+       This driver remains traditional serial device properties. There are
        two special file name for each serial port. One is dial-in port
        which is named "ttyMxx". For callout port, the naming convention
        is "cumxx".
 
        Device naming when more than 2 boards installed
        -----------------------------------------------
-       Naming convention for each Smartio multiport board is pre-defined
-       as below.
+       Naming convention for each Smartio/Industio multiport board is
+       pre-defined as below.
 
        Board Num.	 Dial-in Port	      Callout port
        1st board	ttyM0  - ttyM7	      cum0  - cum7
@@ -129,6 +176,12 @@ Content
        3rd board	ttyM16 - ttyM23       cum16 - cum23
        4th board	ttyM24 - ttym31       cum24 - cum31
 
+
+       !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+       Under Kernel 2.6 the cum Device is Obsolete. So use ttyM*
+       device instead.
+       !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
        Board sequence
        --------------
        This driver will activate ISA boards according to the parameter set
@@ -138,69 +191,131 @@ Content
        For PCI boards, their sequence will be after ISA boards and C168H/PCI
        has higher priority than C104H/PCI boards.
 
-   3.3 Module driver configuration
+   3.4 Module driver configuration
        Module driver is easiest way to install. If you prefer static driver
        installation, please skip this paragraph.
-       1. Find "Makefile" in /moxa/mxser, then run
 
-	  # make install
+
+       ------------- Prepare to use the MOXA driver--------------------
+       3.4.1 Create tty device with correct major number
+          Before using MOXA driver, your system must have the tty devices
+          which are created with driver's major number. We offer one shell
+          script "msmknod" to simplify the procedure.
+          This step is only needed to be executed once. But you still
+          need to do this procedure when:
+          a. You change the driver's major number. Please refer the "3.7"
+             section.
+          b. Your total installed MOXA boards number is changed. Maybe you
+             add/delete one MOXA board.
+          c. You want to change the tty name. This needs to modify the
+             shell script "msmknod"
+
+          The procedure is:
+	  # cd /moxa/mxser/driver
+	  # ./msmknod
+
+          This shell script will require the major number for dial-in
+          device and callout device to create tty device. You also need
+          to specify the total installed MOXA board number. Default major
+          numbers for dial-in device and callout device are 30, 35. If
+          you need to change to other number, please refer section "3.7"
+          for more detailed procedure.
+          Msmknod will delete any special files occupying the same device
+          naming.
+
+       3.4.2 Build the MOXA driver and utilities
+          Before using the MOXA driver and utilities, you need compile the
+          all the source code. This step is only need to be executed once.
+          But you still re-compile the source code if you modify the source
+          code. For example, if you change the driver's major number (see
+          "3.7" section), then you need to do this step again.
+
+          Find "Makefile" in /moxa/mxser, then run
+
+	  # make clean; make install
+
+          !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
+	  For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1:
+	  # make clean; make installsp1
+
+	  For Red Hat Enterprise Linux AS4/ES4/WS4:
+	  # make clean; make installsp2
+          !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
 
 	  The driver files "mxser.o" and utilities will be properly compiled
-	  and copied to system directories respectively.Then run
+	  and copied to system directories respectively.
 
-	  # insmod mxser
+       ------------- Load MOXA driver--------------------
+       3.4.3 Load the MOXA driver
 
-	  to activate the modular driver. You may run "lsmod" to check
-	  if "mxser.o" is activated.
+	  # modprobe mxser <argument>
 
-       2. Create special files by executing "msmknod".
-	  # cd /moxa/mxser/driver
-	  # ./msmknod
+	  will activate the module driver. You may run "lsmod" to check
+	  if "mxser" is activated. If the MOXA board is ISA board, the
+          <argument> is needed. Please refer to section "3.4.5" for more
+          information.
+
+
+       ------------- Load MOXA driver on boot --------------------
+       3.4.4 For the above description, you may manually execute
+          "modprobe mxser" to activate this driver and run
+	  "rmmod mxser" to remove it.
+          However, it's better to have a boot time configuration to
+          eliminate manual operation. Boot time configuration can be
+          achieved by rc file. We offer one "rc.mxser" file to simplify
+          the procedure under "moxa/mxser/driver".
 
-	  Default major numbers for dial-in device and callout device are
-	  174, 175. Msmknod will delete any special files occupying the same
-	  device naming.
+          But if you use ISA board, please modify the "modprobe ..." command
+          to add the argument (see "3.4.5" section). After modifying the
+          rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser"
+          manually to make sure the modification is ok. If any error
+          encountered, please try to modify again. If the modification is
+          completed, follow the below step.
 
-       3. Up to now, you may manually execute "insmod mxser" to activate
-	  this driver and run "rmmod mxser" to remove it. However, it's
-	  better to have a boot time configuration to eliminate manual
-	  operation.
-	  Boot time configuration can be achieved by rc file. Run following
-	  command for setting rc files.
+	  Run following command for setting rc files.
 
 	  # cd /moxa/mxser/driver
 	  # cp ./rc.mxser /etc/rc.d
 	  # cd /etc/rc.d
 
-	  You may have to modify part of the content in rc.mxser to specify
-          parameters for ISA board. Please refer to rc.mxser for more detail.
-          Find "rc.serial". If "rc.serial" doesn't exist, create it by vi.
-	  Add "rc.mxser" in last line. Next, open rc.local by vi
-	  and append following content.
+	  Check "rc.serial" is existed or not. If "rc.serial" doesn't exist,
+	  create it by vi, run "chmod 755 rc.serial" to change the permission.
+	  Add "/etc/rc.d/rc.mxser" in last line,
 
-	  if [ -f /etc/rc.d/rc.serial ]; then
-	     sh /etc/rc.d/rc.serial
-	  fi
+          Reboot and check if moxa.o activated by "lsmod" command.
 
-       4. Reboot and check if mxser.o activated by "lsmod" command.
-       5. If you'd like to drive Smartio ISA boards in the system, you'll
-	  have to add parameter to specify CAP address of given board while
-          activating "mxser.o". The format for parameters are as follows.
+       3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system,
+          you'll have to add parameter to specify CAP address of given
+	  board while activating "mxser.o". The format for parameters are
+	  as follows.
 
-	  insmod mxser ioaddr=0x???,0x???,0x???,0x???
+	  modprobe mxser ioaddr=0x???,0x???,0x???,0x???
 				|      |     |	  |
 				|      |     |	  +- 4th ISA board
 				|      |     +------ 3rd ISA board
 				|      +------------ 2nd ISA board
 				+------------------- 1st ISA board
 
-   3.4 Static driver configuration
+   3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x
+
+       Note: To use static driver, you must install the linux kernel
+             source package.
+
+       3.5.1 Backup the built-in driver in the kernel.
+          # cd /usr/src/linux/drivers/char
+          # mv mxser.c mxser.c.old
+
+          For Red Hat 7.x user, you need to create link:
+          # cd /usr/src
+          # ln -s linux-2.4 linux
 
-       1. Create link
+       3.5.2 Create link
 	  # cd /usr/src/linux/drivers/char
 	  # ln -s /moxa/mxser/driver/mxser.c mxser.c
 
-       2. Add CAP address list for ISA boards
+       3.5.3 Add CAP address list for ISA boards. For PCI boards user,
+          please skip this step.
+
 	  In module mode, the CAP address for ISA board is given by
 	  parameter. In static driver configuration, you'll have to
 	  assign it within driver's source code. If you will not
@@ -222,73 +337,55 @@ Content
 	     static int mxserBoardCAP[]
 	     = {0x280, 0x180, 0x00, 0x00};
 
-       3. Modify tty_io.c
-	  # cd /usr/src/linux/drivers/char/
-	  # vi tty_io.c
-	    Find pty_init(), insert "mxser_init()" as
+       3.5.4 Setup kernel configuration
 
-	    pty_init();
-	    mxser_init();
+          Configure the kernel:
 
-       4. Modify tty.h
-	  # cd /usr/src/linux/include/linux
-	  # vi tty.h
-	    Find extern int tty_init(void), insert "mxser_init()" as
+            # cd /usr/src/linux
+            # make menuconfig
 
-	    extern int tty_init(void);
-	    extern int mxser_init(void);
-     
-       5. Modify Makefile
-	  # cd /usr/src/linux/drivers/char
-	  # vi Makefile
-	    Find L_OBJS := tty_io.o ...... random.o, add
-	    "mxser.o" at last of this line as
-	    L_OBJS := tty_io.o ....... mxser.o
+          You will go into a menu-driven system. Please select [Character
+          devices][Non-standard serial port support], enable the [Moxa
+          SmartIO support] driver with "[*]" for built-in (not "[M]"), then
+          select [Exit] to exit this program.
 
-       6. Rebuild kernel
-	  The following are for Linux kernel rebuilding,for your reference only.
+       3.5.5 Rebuild kernel
+	  The following are for Linux kernel rebuilding, for your
+          reference only.
 	  For appropriate details, please refer to the Linux document.
 
-	  If 'lilo' utility is installed, please use 'make zlilo' to rebuild
-	  kernel. If 'lilo' is not installed, please follow the following steps.
-
 	   a. cd /usr/src/linux
-	   b. make clean			     /* take a few minutes */
-	   c. make bzImage		   /* take probably 10-20 minutes */
-	   d. Backup original boot kernel.		  /* optional step */
-	   e. cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz
+	   b. make clean	     /* take a few minutes */
+	   c. make dep		     /* take a few minutes */
+	   d. make bzImage	     /* take probably 10-20 minutes */
+	   e. make install	     /* copy boot image to correct position */
 	   f. Please make sure the boot kernel (vmlinuz) is in the
-	      correct position. If you use 'lilo' utility, you should
-	      check /etc/lilo.conf 'image' item specified the path
-	      which is the 'vmlinuz' path, or you will load wrong
-	      (or old) boot kernel image (vmlinuz).
-	   g. chmod 400 /vmlinuz
-	   h. lilo
-	   i. rdev -R /vmlinuz 1
-	   j. sync
-
-	  Note that if the result of "make zImage" is ERROR, then you have to
-	  go back to Linux configuration Setup. Type "make config" in directory
-	  /usr/src/linux or "setup".
-
-	  Since system include file, /usr/src/linux/include/linux/interrupt.h,
-	  is modified each time the MOXA driver is installed, kernel rebuilding
-	  is inevitable. And it takes about 10 to 20 minutes depends on the
-	  machine.
-
-       7. Make utility
-	  # cd /moxa/mxser/utility
-	  # make install
-       
-       8. Make special file
+	      correct position.
+	   g. If you use 'lilo' utility, you should check /etc/lilo.conf
+	      'image' item specified the path which is the 'vmlinuz' path,
+	      or you will load wrong (or old) boot kernel image (vmlinuz).
+	      After checking /etc/lilo.conf, please run "lilo".
+
+	  Note that if the result of "make bzImage" is ERROR, then you have to
+	  go back to Linux configuration Setup. Type "make menuconfig" in
+          directory /usr/src/linux.
+
+
+       3.5.6 Make tty device and special file
           # cd /moxa/mxser/driver
           # ./msmknod
 
-       9. Reboot
+       3.5.7 Make utility
+	  # cd /moxa/mxser/utility
+	  # make clean; make install
+
+       3.5.8 Reboot
 
-   3.5 Custom configuration
+
+
+   3.6 Custom configuration
        Although this driver already provides you default configuration, you
-       still can change the device name and major number.The instruction to
+       still can change the device name and major number. The instruction to
        change these parameters are shown as below.
 
        Change Device name
@@ -306,33 +403,37 @@ Content
        2 free major numbers for this driver. There are 3 steps to change
        major numbers.
 
-       1. Find free major numbers
+       3.6.1 Find free major numbers
 	  In /proc/devices, you may find all the major numbers occupied
 	  in the system. Please select 2 major numbers that are available.
 	  e.g. 40, 45.
-       2. Create special files
+       3.6.2 Create special files
 	  Run /moxa/mxser/driver/msmknod to create special files with
 	  specified major numbers.
-       3. Modify driver with new major number
+       3.6.3 Modify driver with new major number
 	  Run vi to open /moxa/mxser/driver/mxser.c. Locate the line
 	  contains "MXSERMAJOR". Change the content as below.
 	  #define	  MXSERMAJOR		  40
 	  #define	  MXSERCUMAJOR		  45
-       4. Run # make install in /moxa/mxser/driver.
+       3.6.4 Run "make clean; make install" in /moxa/mxser/driver.
 
-   3.6 Verify driver installation
+   3.7 Verify driver installation
        You may refer to /var/log/messages to check the latest status
        log reported by this driver whenever it's activated.
+
 -----------------------------------------------------------------------------
 4. Utilities
    There are 3 utilities contained in this driver. They are msdiag, msmon and
    msterm. These 3 utilities are released in form of source code. They should
    be compiled into executable file and copied into /usr/bin.
 
+   Before using these utilities, please load driver (refer 3.4 & 3.5) and
+   make sure you had run the "msmknod" utility.
+
    msdiag - Diagnostic
    --------------------
-   This utility provides the function to detect what Moxa Smartio multiport
-   board exists in the system.
+   This utility provides the function to display what Moxa Smartio/Industio
+   board found by driver in the system.
 
    msmon - Port Monitoring
    -----------------------
@@ -353,12 +454,13 @@ Content
    application, for example, sending AT command to a modem connected to the
    port or used as a terminal for login purpose. Note that this is only a
    dumb terminal emulation without handling full screen operation.
+
 -----------------------------------------------------------------------------
 5. Setserial
 
    Supported Setserial parameters are listed as below.
 
-   uart 	  set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
+   uart		  set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
    close_delay	  set the amount of time(in 1/100 of a second) that DTR
 		  should be kept low while being closed.
    closing_wait   set the amount of time(in 1/100 of a second) that the
@@ -366,7 +468,13 @@ Content
 		  being closed, before the receiver is disable.
    spd_hi	  Use  57.6kb  when  the application requests 38.4kb.
    spd_vhi	  Use  115.2kb	when  the application requests 38.4kb.
+   spd_shi	  Use  230.4kb	when  the application requests 38.4kb.
+   spd_warp	  Use  460.8kb	when  the application requests 38.4kb.
    spd_normal	  Use  38.4kb  when  the application requests 38.4kb.
+   spd_cust	  Use  the custom divisor to set the speed when  the
+		  application requests 38.4kb.
+   divisor	  This option set the custom divison.
+   baud_base	  This option set the base baud rate.
 
 -----------------------------------------------------------------------------
 6. Troubleshooting
@@ -375,8 +483,9 @@ Content
    possible. If all the possible solutions fail, please contact our technical
    support team to get more help.
 
-   Error msg: More than 4 Moxa Smartio family boards found. Fifth board and
-	      after are ignored.
+
+   Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board
+              and after are ignored.
    Solution:
    To avoid this problem, please unplug fifth and after board, because Moxa
    driver supports up to 4 boards.
@@ -384,7 +493,7 @@ Content
    Error msg: Request_irq fail, IRQ(?) may be conflict with another device.
    Solution:
    Other PCI or ISA devices occupy the assigned IRQ. If you are not sure
-   which device causes the situation,please check /proc/interrupts to find
+   which device causes the situation, please check /proc/interrupts to find
    free IRQ and simply change another free IRQ for Moxa board.
 
    Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid.
@@ -397,15 +506,18 @@ Content
    Moxa ISA board needs an interrupt vector.Please refer to user's manual
    "Hardware Installation" chapter to set interrupt vector.
 
-   Error msg: Couldn't install MOXA Smartio family driver!
+   Error msg: Couldn't install MOXA Smartio/Industio family driver!
    Solution:
    Load Moxa driver fail, the major number may conflict with other devices.
-   Please refer to previous section 3.5 to change a free major number for
+   Please refer to previous section 3.7 to change a free major number for
    Moxa driver.
 
-   Error msg: Couldn't install MOXA Smartio family callout driver!
+   Error msg: Couldn't install MOXA Smartio/Industio family callout driver!
    Solution:
    Load Moxa callout driver fail, the callout device major number may
-   conflict with other devices. Please refer to previous section 3.5 to
+   conflict with other devices. Please refer to previous section 3.7 to
    change a free callout device major number for Moxa driver.
+
+
 -----------------------------------------------------------------------------
+
-- 
cgit v1.2.3


From 83766bc63f7e49b0215811026e7802bd09a9c7e1 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 25 Jul 2008 01:48:21 -0700
Subject: Char: mxser, prints cleanup

- use dev_* for printing in pci probe function
- move ISA p[rints directly into isa find function, do not postpone it.
  Remove macros bound to it then.
- prepend some prints by "mxser: " to know what it belongs to

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mxser.c | 80 ++++++++++++++++++++++++----------------------------
 1 file changed, 37 insertions(+), 43 deletions(-)

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 3d7f2a97049..57570f7db2b 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -55,11 +55,6 @@
 #define MXSER_PORTS		(MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
 #define MXSER_ISR_PASS_LIMIT	100
 
-#define	MXSER_ERR_IOADDR	-1
-#define	MXSER_ERR_IRQ		-2
-#define	MXSER_ERR_IRQ_CONFLIT	-3
-#define	MXSER_ERR_VECTOR	-4
-
 /*CheckIsMoxaMust return value*/
 #define MOXA_OTHER_UART		0x00
 #define MOXA_MUST_MU150_HWID	0x01
@@ -2481,7 +2476,8 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 	unsigned int i;
 	int retval;
 
-	printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud);
+	printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
+			brd->ports[0].max_baud);
 
 	for (i = 0; i < brd->info->nports; i++) {
 		info = &brd->ports[i];
@@ -2564,28 +2560,32 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
 		irq = regs[9] & 0xF000;
 		irq = irq | (irq >> 4);
 		if (irq != (regs[9] & 0xFF00))
-			return MXSER_ERR_IRQ_CONFLIT;
+			goto err_irqconflict;
 	} else if (brd->info->nports == 4) {
 		irq = regs[9] & 0xF000;
 		irq = irq | (irq >> 4);
 		irq = irq | (irq >> 8);
 		if (irq != regs[9])
-			return MXSER_ERR_IRQ_CONFLIT;
+			goto err_irqconflict;
 	} else if (brd->info->nports == 8) {
 		irq = regs[9] & 0xF000;
 		irq = irq | (irq >> 4);
 		irq = irq | (irq >> 8);
 		if ((irq != regs[9]) || (irq != regs[10]))
-			return MXSER_ERR_IRQ_CONFLIT;
+			goto err_irqconflict;
 	}
 
-	if (!irq)
-		return MXSER_ERR_IRQ;
+	if (!irq) {
+		printk(KERN_ERR "mxser: interrupt number unset\n");
+		return -EIO;
+	}
 	brd->irq = ((int)(irq & 0xF000) >> 12);
 	for (i = 0; i < 8; i++)
 		brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
-	if ((regs[12] & 0x80) == 0)
-		return MXSER_ERR_VECTOR;
+	if ((regs[12] & 0x80) == 0) {
+		printk(KERN_ERR "mxser: invalid interrupt vector\n");
+		return -EIO;
+	}
 	brd->vector = (int)regs[11];	/* interrupt vector */
 	if (id == 1)
 		brd->vector_mask = 0x00FF;
@@ -2612,13 +2612,26 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
 	else
 		brd->uart_type = PORT_16450;
 	if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
-			"mxser(IO)"))
-		return MXSER_ERR_IOADDR;
+			"mxser(IO)")) {
+		printk(KERN_ERR "mxser: can't request ports I/O region: "
+				"0x%.8lx-0x%.8lx\n",
+				brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+				8 * brd->info->nports - 1);
+		return -EIO;
+	}
 	if (!request_region(brd->vector, 1, "mxser(vector)")) {
 		release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
-		return MXSER_ERR_VECTOR;
+		printk(KERN_ERR "mxser: can't request interrupt vector region: "
+				"0x%.8lx-0x%.8lx\n",
+				brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+				8 * brd->info->nports - 1);
+		return -EIO;
 	}
 	return brd->info->nports;
+
+err_irqconflict:
+	printk(KERN_ERR "mxser: invalid interrupt number\n");
+	return -EIO;
 }
 
 static int __devinit mxser_probe(struct pci_dev *pdev,
@@ -2635,20 +2648,20 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
 			break;
 
 	if (i >= MXSER_BOARDS) {
-		printk(KERN_ERR "Too many Smartio/Industio family boards found "
-			"(maximum %d), board not configured\n", MXSER_BOARDS);
+		dev_err(&pdev->dev, "too many boards found (maximum %d), board "
+				"not configured\n", MXSER_BOARDS);
 		goto err;
 	}
 
 	brd = &mxser_boards[i];
 	brd->idx = i * MXSER_PORTS_PER_BOARD;
-	printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n",
+	dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
 		mxser_cards[ent->driver_data].name,
 		pdev->bus->number, PCI_SLOT(pdev->devfn));
 
 	retval = pci_enable_device(pdev);
 	if (retval) {
-		printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n");
+		dev_err(&pdev->dev, "PCI enable failed\n");
 		goto err;
 	}
 
@@ -2798,33 +2811,14 @@ static int __init mxser_module_init(void)
 
 			brd = &mxser_boards[m];
 			retval = mxser_get_ISA_conf(cap, brd);
-
-			if (retval != 0)
-				printk(KERN_INFO "Found MOXA %s board "
-					"(CAP=0x%x)\n",
-					brd->info->name, ioaddr[b]);
-
 			if (retval <= 0) {
-				if (retval == MXSER_ERR_IRQ)
-					printk(KERN_ERR "Invalid interrupt "
-						"number, board not "
-						"configured\n");
-				else if (retval == MXSER_ERR_IRQ_CONFLIT)
-					printk(KERN_ERR "Invalid interrupt "
-						"number, board not "
-						"configured\n");
-				else if (retval == MXSER_ERR_VECTOR)
-					printk(KERN_ERR "Invalid interrupt "
-						"vector, board not "
-						"configured\n");
-				else if (retval == MXSER_ERR_IOADDR)
-					printk(KERN_ERR "Invalid I/O address, "
-						"board not configured\n");
-
 				brd->info = NULL;
 				continue;
 			}
 
+			printk(KERN_INFO "mxser: found MOXA %s board "
+				"(CAP=0x%x)\n",	brd->info->name, ioaddr[b]);
+
 			/* mxser_initbrd will hook ISR. */
 			if (mxser_initbrd(brd, NULL) < 0) {
 				brd->info = NULL;
@@ -2841,7 +2835,7 @@ static int __init mxser_module_init(void)
 
 	retval = pci_register_driver(&mxser_driver);
 	if (retval) {
-		printk(KERN_ERR "Can't register pci driver\n");
+		printk(KERN_ERR "mxser: can't register pci driver\n");
 		if (!m) {
 			retval = -ENODEV;
 			goto err_unr;
-- 
cgit v1.2.3


From 1df0092477b8b2df605812e298624f5c35bb4805 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 25 Jul 2008 01:48:22 -0700
Subject: Char: mxser, remove predefined isa support

Remove a support of ISA addresses predefined at compile time.  It is
unused (filled by zeroes) and prolongs the code.  Don't initialize global
array and add `ioaddr' module param description.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mxser.c | 67 +++++++++++++++++++++-------------------------------
 1 file changed, 27 insertions(+), 40 deletions(-)

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 57570f7db2b..9b4d03cf4e1 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -173,14 +173,15 @@ static struct pci_device_id mxser_pcibrds[] = {
 };
 MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
 
-static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
+static unsigned long ioaddr[MXSER_BOARDS];
 static int ttymajor = MXSERMAJOR;
 
 /* Variables for insmod */
 
 MODULE_AUTHOR("Casper Yang");
 MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
-module_param_array(ioaddr, int, NULL, 0);
+module_param_array(ioaddr, ulong, NULL, 0);
+MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
 module_param(ttymajor, int, 0);
 MODULE_LICENSE("GPL");
 
@@ -281,11 +282,6 @@ struct mxser_mstatus {
 	int dcd;
 };
 
-static int mxserBoardCAP[MXSER_BOARDS] = {
-	0, 0, 0, 0
-	/*  0x180, 0x280, 0x200, 0x320 */
-};
-
 static struct mxser_board mxser_boards[MXSER_BOARDS];
 static struct tty_driver *mxvar_sdriver;
 static struct mxser_log mxvar_log;
@@ -2763,9 +2759,8 @@ static struct pci_driver mxser_driver = {
 static int __init mxser_module_init(void)
 {
 	struct mxser_board *brd;
-	unsigned long cap;
-	unsigned int i, m, isaloop;
-	int retval, b;
+	unsigned int b, i, m;
+	int retval;
 
 	pr_debug("Loading module mxser ...\n");
 
@@ -2797,41 +2792,33 @@ static int __init mxser_module_init(void)
 		goto err_put;
 	}
 
-	m = 0;
 	/* Start finding ISA boards here */
-	for (isaloop = 0; isaloop < 2; isaloop++)
-		for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) {
-			if (!isaloop)
-				cap = mxserBoardCAP[b]; /* predefined */
-			else
-				cap = ioaddr[b]; /* module param */
-
-			if (!cap)
-				continue;
-
-			brd = &mxser_boards[m];
-			retval = mxser_get_ISA_conf(cap, brd);
-			if (retval <= 0) {
-				brd->info = NULL;
-				continue;
-			}
+	for (m = 0, b = 0; b < MXSER_BOARDS; b++) {
+		if (!ioaddr[b])
+			continue;
+
+		brd = &mxser_boards[m];
+		retval = mxser_get_ISA_conf(!ioaddr[b], brd);
+		if (retval <= 0) {
+			brd->info = NULL;
+			continue;
+		}
 
-			printk(KERN_INFO "mxser: found MOXA %s board "
-				"(CAP=0x%x)\n",	brd->info->name, ioaddr[b]);
+		printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n",
+				brd->info->name, ioaddr[b]);
 
-			/* mxser_initbrd will hook ISR. */
-			if (mxser_initbrd(brd, NULL) < 0) {
-				brd->info = NULL;
-				continue;
-			}
+		/* mxser_initbrd will hook ISR. */
+		if (mxser_initbrd(brd, NULL) < 0) {
+			brd->info = NULL;
+			continue;
+		}
 
-			brd->idx = m * MXSER_PORTS_PER_BOARD;
-			for (i = 0; i < brd->info->nports; i++)
-				tty_register_device(mxvar_sdriver, brd->idx + i,
-						NULL);
+		brd->idx = m * MXSER_PORTS_PER_BOARD;
+		for (i = 0; i < brd->info->nports; i++)
+			tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
 
-			m++;
-		}
+		m++;
+	}
 
 	retval = pci_register_driver(&mxser_driver);
 	if (retval) {
-- 
cgit v1.2.3


From ace7dd96695769f9d76980c7e52139e73228221c Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 25 Jul 2008 01:48:22 -0700
Subject: Char: mxser, various cleanups

- remove unused macro
- some whitespace cleanup
- useless debug prints removal

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/mxser.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 9b4d03cf4e1..e30575e8764 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -48,7 +48,6 @@
 
 #define	MXSER_VERSION	"2.0.4"		/* 1.12 */
 #define	MXSERMAJOR	 174
-#define	MXSERCUMAJOR	 175
 
 #define MXSER_BOARDS		4	/* Max. boards */
 #define MXSER_PORTS_PER_BOARD	8	/* Max. ports per board */
@@ -191,7 +190,6 @@ struct mxser_log {
 	unsigned long txcnt[MXSER_PORTS];
 };
 
-
 struct mxser_mon {
 	unsigned long rxcnt;
 	unsigned long txcnt;
@@ -1305,13 +1303,9 @@ static void mxser_flush_chars(struct tty_struct *tty)
 	struct mxser_port *info = tty->driver_data;
 	unsigned long flags;
 
-	if (info->xmit_cnt <= 0 ||
-			tty->stopped ||
-			!info->port.xmit_buf ||
-			(tty->hw_stopped &&
-			 (info->type != PORT_16550A) &&
-			 (!info->board->chip_flag)
-			))
+	if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf ||
+			(tty->hw_stopped && info->type != PORT_16550A &&
+			 !info->board->chip_flag))
 		return;
 
 	spin_lock_irqsave(&info->slock, flags);
@@ -1329,9 +1323,7 @@ static int mxser_write_room(struct tty_struct *tty)
 	int ret;
 
 	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
-	if (ret < 0)
-		ret = 0;
-	return ret;
+	return ret < 0 ? 0 : ret;
 }
 
 static int mxser_chars_in_buffer(struct tty_struct *tty)
@@ -2762,8 +2754,6 @@ static int __init mxser_module_init(void)
 	unsigned int b, i, m;
 	int retval;
 
-	pr_debug("Loading module mxser ...\n");
-
 	mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
 	if (!mxvar_sdriver)
 		return -ENOMEM;
@@ -2829,8 +2819,6 @@ static int __init mxser_module_init(void)
 		} /* else: we have some ISA cards under control */
 	}
 
-	pr_debug("Done.\n");
-
 	return 0;
 err_unr:
 	tty_unregister_driver(mxvar_sdriver);
@@ -2843,8 +2831,6 @@ static void __exit mxser_module_exit(void)
 {
 	unsigned int i, j;
 
-	pr_debug("Unloading module mxser ...\n");
-
 	pci_unregister_driver(&mxser_driver);
 
 	for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
@@ -2858,8 +2844,6 @@ static void __exit mxser_module_exit(void)
 	for (i = 0; i < MXSER_BOARDS; i++)
 		if (mxser_boards[i].info != NULL)
 			mxser_release_res(&mxser_boards[i], NULL, 1);
-
-	pr_debug("Done.\n");
 }
 
 module_init(mxser_module_init);
-- 
cgit v1.2.3


From ec905a18656daa4d9300bad2bebc02d5dba7883d Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Fri, 25 Jul 2008 01:48:23 -0700
Subject: drivers/misc/phantom: note PCI

Tell users that the driver is only for PCI devices to stop asking for
support of firewire and parallel devices.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/Kconfig   | 4 +++-
 drivers/misc/phantom.c | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 7e37ba5afe3..321eb913463 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -77,11 +77,13 @@ config IBM_ASM
 	  for your IBM server.
 
 config PHANTOM
-	tristate "Sensable PHANToM"
+	tristate "Sensable PHANToM (PCI)"
 	depends on PCI
 	help
 	  Say Y here if you want to build a driver for Sensable PHANToM device.
 
+	  This driver is only for PCI PHANToMs.
+
 	  If you choose to build module, its name will be phantom. If unsure,
 	  say N here.
 
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 4ce3bdc2f95..daf585689ce 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -563,6 +563,6 @@ module_init(phantom_init);
 module_exit(phantom_exit);
 
 MODULE_AUTHOR("Jiri Slaby <jirislaby@gmail.com>");
-MODULE_DESCRIPTION("Sensable Phantom driver");
+MODULE_DESCRIPTION("Sensable Phantom driver (PCI devices)");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(PHANTOM_VERSION);
-- 
cgit v1.2.3


From f37e66173e0cc09b4e5a89eb0294abbefc15f435 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Fri, 25 Jul 2008 01:48:23 -0700
Subject: firmware: use memory_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Markus Rechberger <markus.rechberger@amd.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/base/firmware_class.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index b0be1d18fee..c9c92b00fd5 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -184,7 +184,7 @@ firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 	struct device *dev = to_dev(kobj);
 	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
 	struct firmware *fw;
-	ssize_t ret_count = count;
+	ssize_t ret_count;
 
 	mutex_lock(&fw_lock);
 	fw = fw_priv->fw;
@@ -192,14 +192,8 @@ firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		ret_count = -ENODEV;
 		goto out;
 	}
-	if (offset > fw->size) {
-		ret_count = 0;
-		goto out;
-	}
-	if (offset + ret_count > fw->size)
-		ret_count = fw->size - offset;
-
-	memcpy(buffer, fw->data + offset, ret_count);
+	ret_count = memory_read_from_buffer(buffer, count, &offset,
+						fw->data, fw->size);
 out:
 	mutex_unlock(&fw_lock);
 	return ret_count;
-- 
cgit v1.2.3


From abe19b7b822a8fdbe3dbfd6e066d0698b4eefb06 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Fri, 25 Jul 2008 01:48:24 -0700
Subject: dcdbas: use memory_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Doug Warzecha <Douglas_Warzecha@dell.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/firmware/dcdbas.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
index 0b624e927a6..c66817e7717 100644
--- a/drivers/firmware/dcdbas.c
+++ b/drivers/firmware/dcdbas.c
@@ -152,20 +152,11 @@ static ssize_t smi_data_read(struct kobject *kobj,
 			     struct bin_attribute *bin_attr,
 			     char *buf, loff_t pos, size_t count)
 {
-	size_t max_read;
 	ssize_t ret;
 
 	mutex_lock(&smi_data_lock);
-
-	if (pos >= smi_data_buf_size) {
-		ret = 0;
-		goto out;
-	}
-
-	max_read = smi_data_buf_size - pos;
-	ret = min(max_read, count);
-	memcpy(buf, smi_data_buf + pos, ret);
-out:
+	ret = memory_read_from_buffer(buf, count, &pos, smi_data_buf,
+					smi_data_buf_size);
 	mutex_unlock(&smi_data_lock);
 	return ret;
 }
-- 
cgit v1.2.3


From d805dda412346225a50af2d399d958a4bc676c38 Mon Sep 17 00:00:00 2001
From: Abdel Benamrouche <draconux@gmail.com>
Date: Fri, 25 Jul 2008 01:48:25 -0700
Subject: fs/partition/check.c: fix return value warning

fs/partitions/check.c:381: warning: ignoring return value of ___device_add___,
  declared with attribute warn_unused_result

[akpm@linux-foundation.org: multiple-return-statements-per-function are evil]
Signed-off-by: Abdel Benamrouche <draconux@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/partitions/check.c | 28 ++++++++++++++++++++++------
 include/linux/genhd.h |  2 +-
 2 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index efef715135d..2e6413fbd2d 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -344,18 +344,18 @@ static ssize_t whole_disk_show(struct device *dev,
 static DEVICE_ATTR(whole_disk, S_IRUSR | S_IRGRP | S_IROTH,
 		   whole_disk_show, NULL);
 
-void add_partition(struct gendisk *disk, int part, sector_t start, sector_t len, int flags)
+int add_partition(struct gendisk *disk, int part, sector_t start, sector_t len, int flags)
 {
 	struct hd_struct *p;
 	int err;
 
 	p = kzalloc(sizeof(*p), GFP_KERNEL);
 	if (!p)
-		return;
+		return -ENOMEM;
 
 	if (!init_part_stats(p)) {
-		kfree(p);
-		return;
+		err = -ENOMEM;
+		goto out0;
 	}
 	p->start_sect = start;
 	p->nr_sects = len;
@@ -378,15 +378,31 @@ void add_partition(struct gendisk *disk, int part, sector_t start, sector_t len,
 
 	/* delay uevent until 'holders' subdir is created */
 	p->dev.uevent_suppress = 1;
-	device_add(&p->dev);
+	err = device_add(&p->dev);
+	if (err)
+		goto out1;
 	partition_sysfs_add_subdir(p);
 	p->dev.uevent_suppress = 0;
-	if (flags & ADDPART_FLAG_WHOLEDISK)
+	if (flags & ADDPART_FLAG_WHOLEDISK) {
 		err = device_create_file(&p->dev, &dev_attr_whole_disk);
+		if (err)
+			goto out2;
+	}
 
 	/* suppress uevent if the disk supresses it */
 	if (!disk->dev.uevent_suppress)
 		kobject_uevent(&p->dev.kobj, KOBJ_ADD);
+
+	return 0;
+
+out2:
+	device_del(&p->dev);
+out1:
+	put_device(&p->dev);
+	free_part_stats(p);
+out0:
+	kfree(p);
+	return err;
 }
 
 /* Not exported, helper to add_disk(). */
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index e8787417f65..118216f1bd3 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -541,7 +541,7 @@ extern dev_t blk_lookup_devt(const char *name, int part);
 extern char *disk_name (struct gendisk *hd, int part, char *buf);
 
 extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev);
-extern void add_partition(struct gendisk *, int, sector_t, sector_t, int);
+extern int __must_check add_partition(struct gendisk *, int, sector_t, sector_t, int);
 extern void delete_partition(struct gendisk *, int);
 extern void printk_all_partitions(void);
 
-- 
cgit v1.2.3


From 04ebd4aee52b06a2c38127d9208546e5b96f3a19 Mon Sep 17 00:00:00 2001
From: Abdel Benamrouche <draconux@gmail.com>
Date: Fri, 25 Jul 2008 01:48:26 -0700
Subject: block/ioctl.c and fs/partition/check.c: check value returned by
 add_partition()

Now that add_partition() has been aught to propagate errors, let's check them.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Abdel Benamrouche <draconux@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 block/ioctl.c         |  5 +++--
 fs/partitions/check.c | 10 ++++++++--
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/block/ioctl.c b/block/ioctl.c
index 52d6385216a..77185e5c026 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -17,6 +17,7 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user
 	long long start, length;
 	int part;
 	int i;
+	int err;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
@@ -61,9 +62,9 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user
 				}
 			}
 			/* all seems OK */
-			add_partition(disk, part, start, length, ADDPART_FLAG_NONE);
+			err = add_partition(disk, part, start, length, ADDPART_FLAG_NONE);
 			mutex_unlock(&bdev->bd_mutex);
-			return 0;
+			return err;
 		case BLKPG_DEL_PARTITION:
 			if (!disk->part[part-1])
 				return -ENXIO;
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 2e6413fbd2d..7d6b34e201d 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -499,10 +499,16 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
 		if (!size)
 			continue;
 		if (from + size > get_capacity(disk)) {
-			printk(" %s: p%d exceeds device capacity\n",
+			printk(KERN_ERR " %s: p%d exceeds device capacity\n",
 				disk->disk_name, p);
+			continue;
+		}
+		res = add_partition(disk, p, from, size, state->parts[p].flags);
+		if (res) {
+			printk(KERN_ERR " %s: p%d could not be added: %d\n",
+				disk->disk_name, p, -res);
+			continue;
 		}
-		add_partition(disk, p, from, size, state->parts[p].flags);
 #ifdef CONFIG_BLK_DEV_MD
 		if (state->parts[p].flags & ADDPART_FLAG_RAID)
 			md_autodetect_dev(bdev->bd_dev+p);
-- 
cgit v1.2.3


From d991696263a704be7f41ac186f1a0ed17963c260 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 25 Jul 2008 01:48:26 -0700
Subject: fs/partitions/efi: convert to pr_debug

convert the local Dprintk() compile time debug printk wrappers to the
generic pr_debug() wrapper.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/partitions/efi.c | 42 +++++++++++++++++-------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)

diff --git a/fs/partitions/efi.c b/fs/partitions/efi.c
index e7b07006bc4..038a6022152 100644
--- a/fs/partitions/efi.c
+++ b/fs/partitions/efi.c
@@ -95,13 +95,6 @@
 #include "check.h"
 #include "efi.h"
 
-#undef EFI_DEBUG
-#ifdef EFI_DEBUG
-#define Dprintk(x...) printk(KERN_DEBUG x)
-#else
-#define Dprintk(x...)
-#endif
-
 /* This allows a kernel command line option 'gpt' to override
  * the test for invalid PMBR.  Not __initdata because reloading
  * the partition tables happens after init too.
@@ -305,10 +298,10 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 
 	/* Check the GUID Partition Table signature */
 	if (le64_to_cpu((*gpt)->signature) != GPT_HEADER_SIGNATURE) {
-		Dprintk("GUID Partition Table Header signature is wrong:"
-			"%lld != %lld\n",
-			(unsigned long long)le64_to_cpu((*gpt)->signature),
-			(unsigned long long)GPT_HEADER_SIGNATURE);
+		pr_debug("GUID Partition Table Header signature is wrong:"
+			 "%lld != %lld\n",
+			 (unsigned long long)le64_to_cpu((*gpt)->signature),
+			 (unsigned long long)GPT_HEADER_SIGNATURE);
 		goto fail;
 	}
 
@@ -318,9 +311,8 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 	crc = efi_crc32((const unsigned char *) (*gpt), le32_to_cpu((*gpt)->header_size));
 
 	if (crc != origcrc) {
-		Dprintk
-		    ("GUID Partition Table Header CRC is wrong: %x != %x\n",
-		     crc, origcrc);
+		pr_debug("GUID Partition Table Header CRC is wrong: %x != %x\n",
+			 crc, origcrc);
 		goto fail;
 	}
 	(*gpt)->header_crc32 = cpu_to_le32(origcrc);
@@ -328,9 +320,9 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 	/* Check that the my_lba entry points to the LBA that contains
 	 * the GUID Partition Table */
 	if (le64_to_cpu((*gpt)->my_lba) != lba) {
-		Dprintk("GPT my_lba incorrect: %lld != %lld\n",
-			(unsigned long long)le64_to_cpu((*gpt)->my_lba),
-			(unsigned long long)lba);
+		pr_debug("GPT my_lba incorrect: %lld != %lld\n",
+			 (unsigned long long)le64_to_cpu((*gpt)->my_lba),
+			 (unsigned long long)lba);
 		goto fail;
 	}
 
@@ -339,15 +331,15 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 	 */
 	lastlba = last_lba(bdev);
 	if (le64_to_cpu((*gpt)->first_usable_lba) > lastlba) {
-		Dprintk("GPT: first_usable_lba incorrect: %lld > %lld\n",
-			(unsigned long long)le64_to_cpu((*gpt)->first_usable_lba),
-			(unsigned long long)lastlba);
+		pr_debug("GPT: first_usable_lba incorrect: %lld > %lld\n",
+			 (unsigned long long)le64_to_cpu((*gpt)->first_usable_lba),
+			 (unsigned long long)lastlba);
 		goto fail;
 	}
 	if (le64_to_cpu((*gpt)->last_usable_lba) > lastlba) {
-		Dprintk("GPT: last_usable_lba incorrect: %lld > %lld\n",
-			(unsigned long long)le64_to_cpu((*gpt)->last_usable_lba),
-			(unsigned long long)lastlba);
+		pr_debug("GPT: last_usable_lba incorrect: %lld > %lld\n",
+			 (unsigned long long)le64_to_cpu((*gpt)->last_usable_lba),
+			 (unsigned long long)lastlba);
 		goto fail;
 	}
 
@@ -360,7 +352,7 @@ is_gpt_valid(struct block_device *bdev, u64 lba,
 			le32_to_cpu((*gpt)->sizeof_partition_entry));
 
 	if (crc != le32_to_cpu((*gpt)->partition_entry_array_crc32)) {
-		Dprintk("GUID Partitition Entry Array CRC check failed.\n");
+		pr_debug("GUID Partitition Entry Array CRC check failed.\n");
 		goto fail_ptes;
 	}
 
@@ -616,7 +608,7 @@ efi_partition(struct parsed_partitions *state, struct block_device *bdev)
 		return 0;
 	}
 
-	Dprintk("GUID Partition Table is valid!  Yea!\n");
+	pr_debug("GUID Partition Table is valid!  Yea!\n");
 
 	for (i = 0; i < le32_to_cpu(gpt->num_partition_entries) && i < state->limit-1; i++) {
 		if (!is_pte_valid(&ptes[i], last_lba(bdev)))
-- 
cgit v1.2.3


From 25377479de7539fdc871a0f0ecaa39da42353bbc Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Fri, 25 Jul 2008 01:48:27 -0700
Subject: dell_rbu: use memory_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Abhay Salunke <Abhay_Salunke@dell.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/firmware/dell_rbu.c | 28 +++-------------------------
 1 file changed, 3 insertions(+), 25 deletions(-)

diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c
index 7430e218cda..13946ebd77d 100644
--- a/drivers/firmware/dell_rbu.c
+++ b/drivers/firmware/dell_rbu.c
@@ -507,11 +507,6 @@ static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count)
 
 static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
 {
-	unsigned char *ptemp = NULL;
-	size_t bytes_left = 0;
-	size_t data_length = 0;
-	ssize_t ret_count = 0;
-
 	/* check to see if we have something to return */
 	if ((rbu_data.image_update_buffer == NULL) ||
 		(rbu_data.bios_image_size == 0)) {
@@ -519,28 +514,11 @@ static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
 			"bios_image_size %lu\n",
 			rbu_data.image_update_buffer,
 			rbu_data.bios_image_size);
-		ret_count = -ENOMEM;
-		goto read_rbu_data_exit;
-	}
-
-	if (pos > rbu_data.bios_image_size) {
-		ret_count = 0;
-		goto read_rbu_data_exit;
+		return -ENOMEM;
 	}
 
-	bytes_left = rbu_data.bios_image_size - pos;
-	data_length = min(bytes_left, count);
-
-	ptemp = rbu_data.image_update_buffer;
-	memcpy(buffer, (ptemp + pos), data_length);
-
-	if ((pos + count) > rbu_data.bios_image_size)
-		/* this was the last copy */
-		ret_count = bytes_left;
-	else
-		ret_count = count;
-      read_rbu_data_exit:
-	return ret_count;
+	return memory_read_from_buffer(buffer, count, &pos,
+			rbu_data.image_update_buffer, rbu_data.bios_image_size);
 }
 
 static ssize_t read_rbu_data(struct kobject *kobj,
-- 
cgit v1.2.3


From cd9a6f1078ed07fe919667b73e829f3bac485573 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:48:28 -0700
Subject: unexport proc_clear_tty

With the removal of the Solaris binary emulation the export of
proc_clear_tty became unused.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tty_io.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 6f4d856df98..e1b46bc7e43 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -3580,7 +3580,6 @@ void proc_clear_tty(struct task_struct *p)
 	p->signal->tty = NULL;
 	spin_unlock_irq(&p->sighand->siglock);
 }
-EXPORT_SYMBOL(proc_clear_tty);
 
 /* Called under the sighand lock */
 
-- 
cgit v1.2.3


From 6e644c3126149b65460610fe5a00d8a162092abe Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:48:28 -0700
Subject: move proc_kmsg_operations to fs/proc/internal.h

This patch moves the extern of struct proc_kmsg_operations to
fs/proc/internal.h and adds an #include "internal.h" to fs/proc/kmsg.c
so that the latter sees the former.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/internal.h      | 1 +
 fs/proc/kmsg.c          | 2 ++
 include/linux/proc_fs.h | 1 -
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 28cbca80590..8d67616e7bb 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -63,6 +63,7 @@ extern const struct file_operations proc_smaps_operations;
 extern const struct file_operations proc_clear_refs_operations;
 extern const struct file_operations proc_pagemap_operations;
 extern const struct file_operations proc_net_operations;
+extern const struct file_operations proc_kmsg_operations;
 extern const struct inode_operations proc_net_inode_operations;
 
 void free_proc_entry(struct proc_dir_entry *de);
diff --git a/fs/proc/kmsg.c b/fs/proc/kmsg.c
index ff3b90b56e9..9fd5df3f40c 100644
--- a/fs/proc/kmsg.c
+++ b/fs/proc/kmsg.c
@@ -15,6 +15,8 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
+#include "internal.h"
+
 extern wait_queue_head_t log_wait;
 
 extern int do_syslog(int type, char __user *bug, int count);
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 15a9eaf4a80..cdabc2fc02f 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -138,7 +138,6 @@ extern int proc_readdir(struct file *, void *, filldir_t);
 extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
 
 extern const struct file_operations proc_kcore_operations;
-extern const struct file_operations proc_kmsg_operations;
 extern const struct file_operations ppc_htab_operations;
 
 extern int pid_ns_prepare_proc(struct pid_namespace *ns);
-- 
cgit v1.2.3


From 881adb85358309ea9c6f707394002719982ec607 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Fri, 25 Jul 2008 01:48:29 -0700
Subject: proc: always do ->release

Current two-stage scheme of removing PDE emphasizes one bug in proc:

		open
				rmmod
				remove_proc_entry
		close

->release won't be called because ->proc_fops were cleared.  In simple
cases it's small memory leak.

For every ->open, ->release has to be done.  List of openers is introduced
which is traversed at remove_proc_entry() if neeeded.

Discussions with Al long ago (sigh).

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/generic.c       | 14 ++++++++++
 fs/proc/inode.c         | 74 ++++++++++++++++++++++++++++++++++++++++++++++---
 fs/proc/internal.h      |  7 +++++
 include/linux/proc_fs.h |  1 +
 4 files changed, 92 insertions(+), 4 deletions(-)

diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 43e54e86cef..bc0a0dd2d84 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -597,6 +597,7 @@ static struct proc_dir_entry *__proc_create(struct proc_dir_entry **parent,
 	ent->pde_users = 0;
 	spin_lock_init(&ent->pde_unload_lock);
 	ent->pde_unload_completion = NULL;
+	INIT_LIST_HEAD(&ent->pde_openers);
  out:
 	return ent;
 }
@@ -789,6 +790,19 @@ void remove_proc_entry(const char *name, struct proc_dir_entry *parent)
 	spin_unlock(&de->pde_unload_lock);
 
 continue_removing:
+	spin_lock(&de->pde_unload_lock);
+	while (!list_empty(&de->pde_openers)) {
+		struct pde_opener *pdeo;
+
+		pdeo = list_first_entry(&de->pde_openers, struct pde_opener, lh);
+		list_del(&pdeo->lh);
+		spin_unlock(&de->pde_unload_lock);
+		pdeo->release(pdeo->inode, pdeo->file);
+		kfree(pdeo);
+		spin_lock(&de->pde_unload_lock);
+	}
+	spin_unlock(&de->pde_unload_lock);
+
 	if (S_ISDIR(de->mode))
 		parent->nlink--;
 	de->nlink = 0;
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index b08d1001791..354c0848582 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -126,12 +126,17 @@ static const struct super_operations proc_sops = {
 	.remount_fs	= proc_remount,
 };
 
-static void pde_users_dec(struct proc_dir_entry *pde)
+static void __pde_users_dec(struct proc_dir_entry *pde)
 {
-	spin_lock(&pde->pde_unload_lock);
 	pde->pde_users--;
 	if (pde->pde_unload_completion && pde->pde_users == 0)
 		complete(pde->pde_unload_completion);
+}
+
+static void pde_users_dec(struct proc_dir_entry *pde)
+{
+	spin_lock(&pde->pde_unload_lock);
+	__pde_users_dec(pde);
 	spin_unlock(&pde->pde_unload_lock);
 }
 
@@ -318,36 +323,97 @@ static int proc_reg_open(struct inode *inode, struct file *file)
 	struct proc_dir_entry *pde = PDE(inode);
 	int rv = 0;
 	int (*open)(struct inode *, struct file *);
+	int (*release)(struct inode *, struct file *);
+	struct pde_opener *pdeo;
+
+	/*
+	 * What for, you ask? Well, we can have open, rmmod, remove_proc_entry
+	 * sequence. ->release won't be called because ->proc_fops will be
+	 * cleared. Depending on complexity of ->release, consequences vary.
+	 *
+	 * We can't wait for mercy when close will be done for real, it's
+	 * deadlockable: rmmod foo </proc/foo . So, we're going to do ->release
+	 * by hand in remove_proc_entry(). For this, save opener's credentials
+	 * for later.
+	 */
+	pdeo = kmalloc(sizeof(struct pde_opener), GFP_KERNEL);
+	if (!pdeo)
+		return -ENOMEM;
 
 	spin_lock(&pde->pde_unload_lock);
 	if (!pde->proc_fops) {
 		spin_unlock(&pde->pde_unload_lock);
+		kfree(pdeo);
 		return rv;
 	}
 	pde->pde_users++;
 	open = pde->proc_fops->open;
+	release = pde->proc_fops->release;
 	spin_unlock(&pde->pde_unload_lock);
 
 	if (open)
 		rv = open(inode, file);
 
-	pde_users_dec(pde);
+	spin_lock(&pde->pde_unload_lock);
+	if (rv == 0 && release) {
+		/* To know what to release. */
+		pdeo->inode = inode;
+		pdeo->file = file;
+		/* Strictly for "too late" ->release in proc_reg_release(). */
+		pdeo->release = release;
+		list_add(&pdeo->lh, &pde->pde_openers);
+	} else
+		kfree(pdeo);
+	__pde_users_dec(pde);
+	spin_unlock(&pde->pde_unload_lock);
 	return rv;
 }
 
+static struct pde_opener *find_pde_opener(struct proc_dir_entry *pde,
+					struct inode *inode, struct file *file)
+{
+	struct pde_opener *pdeo;
+
+	list_for_each_entry(pdeo, &pde->pde_openers, lh) {
+		if (pdeo->inode == inode && pdeo->file == file)
+			return pdeo;
+	}
+	return NULL;
+}
+
 static int proc_reg_release(struct inode *inode, struct file *file)
 {
 	struct proc_dir_entry *pde = PDE(inode);
 	int rv = 0;
 	int (*release)(struct inode *, struct file *);
+	struct pde_opener *pdeo;
 
 	spin_lock(&pde->pde_unload_lock);
+	pdeo = find_pde_opener(pde, inode, file);
 	if (!pde->proc_fops) {
-		spin_unlock(&pde->pde_unload_lock);
+		/*
+		 * Can't simply exit, __fput() will think that everything is OK,
+		 * and move on to freeing struct file. remove_proc_entry() will
+		 * find slacker in opener's list and will try to do non-trivial
+		 * things with struct file. Therefore, remove opener from list.
+		 *
+		 * But if opener is removed from list, who will ->release it?
+		 */
+		if (pdeo) {
+			list_del(&pdeo->lh);
+			spin_unlock(&pde->pde_unload_lock);
+			rv = pdeo->release(inode, file);
+			kfree(pdeo);
+		} else
+			spin_unlock(&pde->pde_unload_lock);
 		return rv;
 	}
 	pde->pde_users++;
 	release = pde->proc_fops->release;
+	if (pdeo) {
+		list_del(&pdeo->lh);
+		kfree(pdeo);
+	}
 	spin_unlock(&pde->pde_unload_lock);
 
 	if (release)
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 8d67616e7bb..442202314d5 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -89,3 +89,10 @@ struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *ino,
 		struct dentry *dentry);
 int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent,
 		filldir_t filldir);
+
+struct pde_opener {
+	struct inode *inode;
+	struct file *file;
+	int (*release)(struct inode *, struct file *);
+	struct list_head lh;
+};
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index cdabc2fc02f..f560d1705af 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -79,6 +79,7 @@ struct proc_dir_entry {
 	int pde_users;	/* number of callers into module in progress */
 	spinlock_t pde_unload_lock; /* proc_fops checks and pde_users bumps */
 	struct completion *pde_unload_completion;
+	struct list_head pde_openers;	/* who did ->open, but not ->release */
 };
 
 struct kcore_list {
-- 
cgit v1.2.3


From a9bd4a3e070ba7494f154e1a11687a8a957d88dc Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Fri, 25 Jul 2008 01:48:30 -0700
Subject: proc: remove pathetic remount code

MS_RMT_MASK will unmask changes in do_remount_sb() anyway.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/inode.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 354c0848582..02eca2ed9dd 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -111,19 +111,12 @@ int __init proc_init_inodecache(void)
 	return 0;
 }
 
-static int proc_remount(struct super_block *sb, int *flags, char *data)
-{
-	*flags |= MS_NODIRATIME;
-	return 0;
-}
-
 static const struct super_operations proc_sops = {
 	.alloc_inode	= proc_alloc_inode,
 	.destroy_inode	= proc_destroy_inode,
 	.drop_inode	= generic_delete_inode,
 	.delete_inode	= proc_delete_inode,
 	.statfs		= simple_statfs,
-	.remount_fs	= proc_remount,
 };
 
 static void __pde_users_dec(struct proc_dir_entry *pde)
-- 
cgit v1.2.3


From 6eedf8d30d2b48e86fbcee1a32fb2fa5f42219ee Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Fri, 25 Jul 2008 01:48:30 -0700
Subject: proc: move Kconfig to fs/proc/Kconfig

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/Kconfig      | 60 +--------------------------------------------------------
 fs/proc/Kconfig | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+), 59 deletions(-)
 create mode 100644 fs/proc/Kconfig

diff --git a/fs/Kconfig b/fs/Kconfig
index ed563b9e352..97e3bdedb1e 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -902,65 +902,7 @@ endif # BLOCK
 
 menu "Pseudo filesystems"
 
-config PROC_FS
-	bool "/proc file system support" if EMBEDDED
-	default y
-	help
-	  This is a virtual file system providing information about the status
-	  of the system. "Virtual" means that it doesn't take up any space on
-	  your hard disk: the files are created on the fly by the kernel when
-	  you try to access them. Also, you cannot read the files with older
-	  version of the program less: you need to use more or cat.
-
-	  It's totally cool; for example, "cat /proc/interrupts" gives
-	  information about what the different IRQs are used for at the moment
-	  (there is a small number of Interrupt ReQuest lines in your computer
-	  that are used by the attached devices to gain the CPU's attention --
-	  often a source of trouble if two devices are mistakenly configured
-	  to use the same IRQ). The program procinfo to display some
-	  information about your system gathered from the /proc file system.
-
-	  Before you can use the /proc file system, it has to be mounted,
-	  meaning it has to be given a location in the directory hierarchy.
-	  That location should be /proc. A command such as "mount -t proc proc
-	  /proc" or the equivalent line in /etc/fstab does the job.
-
-	  The /proc file system is explained in the file
-	  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
-	  ("man 5 proc").
-
-	  This option will enlarge your kernel by about 67 KB. Several
-	  programs depend on this, so everyone should say Y here.
-
-config PROC_KCORE
-	bool "/proc/kcore support" if !ARM
-	depends on PROC_FS && MMU
-
-config PROC_VMCORE
-        bool "/proc/vmcore support (EXPERIMENTAL)"
-        depends on PROC_FS && CRASH_DUMP
-	default y
-        help
-        Exports the dump image of crashed kernel in ELF format.
-
-config PROC_SYSCTL
-	bool "Sysctl support (/proc/sys)" if EMBEDDED
-	depends on PROC_FS
-	select SYSCTL
-	default y
-	---help---
-	  The sysctl interface provides a means of dynamically changing
-	  certain kernel parameters and variables on the fly without requiring
-	  a recompile of the kernel or reboot of the system.  The primary
-	  interface is through /proc/sys.  If you say Y here a tree of
-	  modifiable sysctl entries will be generated beneath the
-          /proc/sys directory. They are explained in the files
-	  in <file:Documentation/sysctl/>.  Note that enabling this
-	  option will enlarge the kernel by at least 8 KB.
-
-	  As it is generally a good thing, you should say Y here unless
-	  building a kernel for install/rescue disks or your system is very
-	  limited in memory.
+source "fs/proc/Kconfig"
 
 config SYSFS
 	bool "sysfs file system support" if EMBEDDED
diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig
new file mode 100644
index 00000000000..73cd7a418f0
--- /dev/null
+++ b/fs/proc/Kconfig
@@ -0,0 +1,59 @@
+config PROC_FS
+	bool "/proc file system support" if EMBEDDED
+	default y
+	help
+	  This is a virtual file system providing information about the status
+	  of the system. "Virtual" means that it doesn't take up any space on
+	  your hard disk: the files are created on the fly by the kernel when
+	  you try to access them. Also, you cannot read the files with older
+	  version of the program less: you need to use more or cat.
+
+	  It's totally cool; for example, "cat /proc/interrupts" gives
+	  information about what the different IRQs are used for at the moment
+	  (there is a small number of Interrupt ReQuest lines in your computer
+	  that are used by the attached devices to gain the CPU's attention --
+	  often a source of trouble if two devices are mistakenly configured
+	  to use the same IRQ). The program procinfo to display some
+	  information about your system gathered from the /proc file system.
+
+	  Before you can use the /proc file system, it has to be mounted,
+	  meaning it has to be given a location in the directory hierarchy.
+	  That location should be /proc. A command such as "mount -t proc proc
+	  /proc" or the equivalent line in /etc/fstab does the job.
+
+	  The /proc file system is explained in the file
+	  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
+	  ("man 5 proc").
+
+	  This option will enlarge your kernel by about 67 KB. Several
+	  programs depend on this, so everyone should say Y here.
+
+config PROC_KCORE
+	bool "/proc/kcore support" if !ARM
+	depends on PROC_FS && MMU
+
+config PROC_VMCORE
+        bool "/proc/vmcore support (EXPERIMENTAL)"
+        depends on PROC_FS && CRASH_DUMP
+	default y
+        help
+        Exports the dump image of crashed kernel in ELF format.
+
+config PROC_SYSCTL
+	bool "Sysctl support (/proc/sys)" if EMBEDDED
+	depends on PROC_FS
+	select SYSCTL
+	default y
+	---help---
+	  The sysctl interface provides a means of dynamically changing
+	  certain kernel parameters and variables on the fly without requiring
+	  a recompile of the kernel or reboot of the system.  The primary
+	  interface is through /proc/sys.  If you say Y here a tree of
+	  modifiable sysctl entries will be generated beneath the
+          /proc/sys directory. They are explained in the files
+	  in <file:Documentation/sysctl/>.  Note that enabling this
+	  option will enlarge the kernel by at least 8 KB.
+
+	  As it is generally a good thing, you should say Y here unless
+	  building a kernel for install/rescue disks or your system is very
+	  limited in memory.
-- 
cgit v1.2.3


From 339caf2a224fc9af0f01686bf287dda32c6efca6 Mon Sep 17 00:00:00 2001
From: David Sterba <dsterba@suse.cz>
Date: Fri, 25 Jul 2008 01:48:31 -0700
Subject: proc: misplaced export of find_get_pid

Move EXPORT_SYMBOL right after the func

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/pid.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/pid.c b/kernel/pid.c
index 30bd5d4b2ac..753fd90d9ec 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -435,6 +435,7 @@ struct pid *find_get_pid(pid_t nr)
 
 	return pid;
 }
+EXPORT_SYMBOL_GPL(find_get_pid);
 
 pid_t pid_nr_ns(struct pid *pid, struct pid_namespace *ns)
 {
@@ -497,7 +498,6 @@ struct pid *find_ge_pid(int nr, struct pid_namespace *ns)
 
 	return pid;
 }
-EXPORT_SYMBOL_GPL(find_get_pid);
 
 /*
  * The pid hash table is scaled according to the amount of memory in the
-- 
cgit v1.2.3


From 99541c23cd32bacf1a591ca537a7c0cb9053ad7e Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@parallels.com>
Date: Fri, 25 Jul 2008 01:48:31 -0700
Subject: sysctl: check for bogus modes

Catch, e. g., 644/0644 typo.

Signed-off-by: Alexey Dobriyan <adobriyan@parallels.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sysctl_check.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c
index c09350d564f..c35da23ab8f 100644
--- a/kernel/sysctl_check.c
+++ b/kernel/sysctl_check.c
@@ -1532,6 +1532,8 @@ int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table)
 			sysctl_check_leaf(namespaces, table, &fail);
 		}
 		sysctl_check_bin_path(table, &fail);
+		if (table->mode > 0777)
+			set_fail(&fail, table, "bogus .mode");
 		if (fail) {
 			set_fail(&fail, table, NULL);
 			error = -EINVAL;
-- 
cgit v1.2.3


From 4ecb90090c84210a8bd2a9d7a5906e616735873c Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Fri, 25 Jul 2008 01:48:32 -0700
Subject: sysctl: allow override of /proc/sys/net with CAP_NET_ADMIN

Extend the permission check for networking sysctl's to allow modification
when current process has CAP_NET_ADMIN capability and is not root.  This
version uses the until now unused permissions hook to override the mode
value for /proc/sys/net if accessed by a user with capabilities.

Found while working with Quagga.  It is impossible to turn forwarding
on/off through the command interface because Quagga uses secure coding
practice of dropping privledges during initialization and only raising via
capabilities when necessary.  Since the dameon has reset real/effective
uid after initialization, all attempts to access /proc/sys/net variables
will fail.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morgan <morgan@kernel.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 net/sysctl_net.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/net/sysctl_net.c b/net/sysctl_net.c
index 007c1a6708e..63ada437fc2 100644
--- a/net/sysctl_net.c
+++ b/net/sysctl_net.c
@@ -35,8 +35,22 @@ net_ctl_header_lookup(struct ctl_table_root *root, struct nsproxy *namespaces)
 	return &namespaces->net_ns->sysctl_table_headers;
 }
 
+/* Return standard mode bits for table entry. */
+static int net_ctl_permissions(struct ctl_table_root *root,
+			       struct nsproxy *nsproxy,
+			       struct ctl_table *table)
+{
+	/* Allow network administrator to have same access as root. */
+	if (capable(CAP_NET_ADMIN)) {
+		int mode = (table->mode >> 6) & 7;
+		return (mode << 6) | (mode << 3) | mode;
+	}
+	return table->mode;
+}
+
 static struct ctl_table_root net_sysctl_root = {
 	.lookup = net_ctl_header_lookup,
+	.permissions = net_ctl_permissions,
 };
 
 static LIST_HEAD(net_sysctl_ro_tables);
-- 
cgit v1.2.3


From 3ae4eed34be0177a8e003411a84e4ee212adbced Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:48:34 -0700
Subject: proper pid{hash,map}_init() prototypes

This patch adds proper prototypes for pid{hash,map}_init() in
include/linux/pid_namespace.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/pid_namespace.h | 3 +++
 init/main.c                   | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index caff5283d15..1a49ab5ec7b 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -85,4 +85,7 @@ static inline struct task_struct *task_child_reaper(struct task_struct *tsk)
 	return tsk->nsproxy->pid_ns->child_reaper;
 }
 
+void pidhash_init(void);
+void pidmap_init(void);
+
 #endif /* _LINUX_PID_NS_H */
diff --git a/init/main.c b/init/main.c
index 2769dc031c6..0604cbcaf1e 100644
--- a/init/main.c
+++ b/init/main.c
@@ -87,8 +87,6 @@ extern void init_IRQ(void);
 extern void fork_init(unsigned long);
 extern void mca_init(void);
 extern void sbus_init(void);
-extern void pidhash_init(void);
-extern void pidmap_init(void);
 extern void prio_tree_init(void);
 extern void radix_tree_init(void);
 extern void free_initmem(void);
-- 
cgit v1.2.3


From 33166b1ffca5e1945246bcaa77d72a22b0d3e531 Mon Sep 17 00:00:00 2001
From: Richard Kennedy <richard@rsk.demon.co.uk>
Date: Fri, 25 Jul 2008 01:48:35 -0700
Subject: shrink struct pid by removing padding on 64 bit builds

When struct pid is built on a 64 bit platform gcc has to insert padding to
maintain the correct alignment, by simply reordering its members the
memory usage shrinks from 88 bytes to 80.

I've successfully run with this patch on my desktop AMD64 machine.

There are no significant kernel size changes to a default config.X86_64
on the latest git v2.6.26-rc1

   text    data     bss     dec     hex filename
5404828  976760  734280 7115868  6c945c vmlinux
5404811  976760  734280 7115851  6c944b vmlinux.pid-patch

Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/pid.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/pid.h b/include/linux/pid.h
index c21c7e8124a..6f084b9e2c4 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -57,10 +57,10 @@ struct upid {
 struct pid
 {
 	atomic_t count;
+	unsigned int level;
 	/* lists of tasks that use this pid */
 	struct hlist_head tasks[PIDTYPE_MAX];
 	struct rcu_head rcu;
-	unsigned int level;
 	struct upid numbers[1];
 };
 
-- 
cgit v1.2.3


From 19b0cfcca41dd772065671ad0584e1cea0f3fd13 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:35 -0700
Subject: pidns: remove now unused kill_proc function

This function operated on a pid_t to kill a task, which is no longer valid
in a containerized system.

It has finally lost all its users and we can safely remove it from the
tree.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sched.h |  1 -
 kernel/signal.c       | 12 ------------
 2 files changed, 13 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index 0560999eb1d..134cb5cb506 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1800,7 +1800,6 @@ extern void force_sig(int, struct task_struct *);
 extern void force_sig_specific(int, struct task_struct *);
 extern int send_sig(int, struct task_struct *, int);
 extern void zap_other_threads(struct task_struct *p);
-extern int kill_proc(pid_t, int, int);
 extern struct sigqueue *sigqueue_alloc(void);
 extern void sigqueue_free(struct sigqueue *);
 extern int send_sigqueue(struct sigqueue *,  struct task_struct *, int group);
diff --git a/kernel/signal.c b/kernel/signal.c
index 5c7b7eaa0dc..82c3545596c 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1228,17 +1228,6 @@ int kill_pid(struct pid *pid, int sig, int priv)
 }
 EXPORT_SYMBOL(kill_pid);
 
-int
-kill_proc(pid_t pid, int sig, int priv)
-{
-	int ret;
-
-	rcu_read_lock();
-	ret = kill_pid_info(sig, __si_special(priv), find_pid(pid));
-	rcu_read_unlock();
-	return ret;
-}
-
 /*
  * These functions support sending signals using preallocated sigqueue
  * structures.  This is needed "because realtime applications cannot
@@ -1906,7 +1895,6 @@ EXPORT_SYMBOL(recalc_sigpending);
 EXPORT_SYMBOL_GPL(dequeue_signal);
 EXPORT_SYMBOL(flush_signals);
 EXPORT_SYMBOL(force_sig);
-EXPORT_SYMBOL(kill_proc);
 EXPORT_SYMBOL(ptrace_notify);
 EXPORT_SYMBOL(send_sig);
 EXPORT_SYMBOL(send_sig_info);
-- 
cgit v1.2.3


From e49859e71e0318b564de1546bdc30fab738f9deb Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:36 -0700
Subject: pidns: remove now unused find_pid function.

This one had the only users so far - the kill_proc, which is removed, so
drop this (invalid in namespaced world) call too.

And of course - erase all references on it from comments.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/pid.h   | 4 +---
 include/linux/sched.h | 2 +-
 kernel/pid.c          | 8 +-------
 3 files changed, 3 insertions(+), 11 deletions(-)

diff --git a/include/linux/pid.h b/include/linux/pid.h
index 6f084b9e2c4..ff1b2a5814d 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -48,7 +48,7 @@ enum pid_type
  */
 
 struct upid {
-	/* Try to keep pid_chain in the same cacheline as nr for find_pid */
+	/* Try to keep pid_chain in the same cacheline as nr for find_vpid */
 	int nr;
 	struct pid_namespace *ns;
 	struct hlist_node pid_chain;
@@ -105,14 +105,12 @@ extern struct pid_namespace init_pid_ns;
  * or rcu_read_lock() held.
  *
  * find_pid_ns() finds the pid in the namespace specified
- * find_pid() find the pid by its global id, i.e. in the init namespace
  * find_vpid() finr the pid by its virtual id, i.e. in the current namespace
  *
  * see also find_task_by_pid() set in include/linux/sched.h
  */
 extern struct pid *find_pid_ns(int nr, struct pid_namespace *ns);
 extern struct pid *find_vpid(int nr);
-extern struct pid *find_pid(int nr);
 
 /*
  * Lookup a PID in the hash table, and return with it's count elevated.
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 134cb5cb506..182da1550fa 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1718,7 +1718,7 @@ extern struct pid_namespace init_pid_ns;
  * find_task_by_pid():
  *      finds a task by its global pid
  *
- * see also find_pid() etc in include/linux/pid.h
+ * see also find_vpid() etc in include/linux/pid.h
  */
 
 extern struct task_struct *find_task_by_pid_type_ns(int type, int pid,
diff --git a/kernel/pid.c b/kernel/pid.c
index 753fd90d9ec..064e76afa50 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -309,12 +309,6 @@ struct pid *find_vpid(int nr)
 }
 EXPORT_SYMBOL_GPL(find_vpid);
 
-struct pid *find_pid(int nr)
-{
-	return find_pid_ns(nr, &init_pid_ns);
-}
-EXPORT_SYMBOL_GPL(find_pid);
-
 /*
  * attach_pid() must be called with the tasklist_lock write-held.
  */
@@ -483,7 +477,7 @@ EXPORT_SYMBOL(task_session_nr_ns);
 /*
  * Used by proc to find the first pid that is greater then or equal to nr.
  *
- * If there is a pid at nr this function is exactly the same as find_pid.
+ * If there is a pid at nr this function is exactly the same as find_pid_ns.
  */
 struct pid *find_ge_pid(int nr, struct pid_namespace *ns)
 {
-- 
cgit v1.2.3


From dbda0de52618d13d1b927c7ba7bb839cfddc4e8c Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:37 -0700
Subject: pidns: remove find_task_by_pid, unused for a long time

It seems to me that it was a mistake marking this function as deprecated
and scheduling it for removal, rather than resolutely removing it after
the last caller's death.

Anyway - better late, then never.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/feature-removal-schedule.txt | 18 ------------------
 include/linux/pid.h                        |  2 +-
 include/linux/sched.h                      |  6 ------
 3 files changed, 1 insertion(+), 25 deletions(-)

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 09c4a1efb8e..721c71b86e0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -138,24 +138,6 @@ Who:	Kay Sievers <kay.sievers@suse.de>
 
 ---------------------------
 
-What:	find_task_by_pid
-When:	2.6.26
-Why:	With pid namespaces, calling this funciton will return the
-	wrong task when called from inside a namespace.
-
-	The best way to save a task pid and find a task by this
-	pid later, is to find this task's struct pid pointer (or get
-	it directly from the task) and call pid_task() later.
-
-	If someone really needs to get a task by its pid_t, then
-	he most likely needs the find_task_by_vpid() to get the
-	task from the same namespace as the current task is in, but
-	this may be not so in general.
-
-Who:	Pavel Emelyanov <xemul@openvz.org>
-
----------------------------
-
 What:	ACPI procfs interface
 When:	July 2008
 Why:	ACPI sysfs conversion should be finished by January 2008.
diff --git a/include/linux/pid.h b/include/linux/pid.h
index ff1b2a5814d..22921ac4cfd 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -107,7 +107,7 @@ extern struct pid_namespace init_pid_ns;
  * find_pid_ns() finds the pid in the namespace specified
  * find_vpid() finr the pid by its virtual id, i.e. in the current namespace
  *
- * see also find_task_by_pid() set in include/linux/sched.h
+ * see also find_task_by_vpid() set in include/linux/sched.h
  */
 extern struct pid *find_pid_ns(int nr, struct pid_namespace *ns);
 extern struct pid *find_vpid(int nr);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 182da1550fa..354ef478a80 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1715,8 +1715,6 @@ extern struct pid_namespace init_pid_ns;
  *      finds a task by its pid in the specified namespace
  * find_task_by_vpid():
  *      finds a task by its virtual pid
- * find_task_by_pid():
- *      finds a task by its global pid
  *
  * see also find_vpid() etc in include/linux/pid.h
  */
@@ -1724,10 +1722,6 @@ extern struct pid_namespace init_pid_ns;
 extern struct task_struct *find_task_by_pid_type_ns(int type, int pid,
 		struct pid_namespace *ns);
 
-static inline struct task_struct *__deprecated find_task_by_pid(pid_t nr)
-{
-	return find_task_by_pid_type_ns(PIDTYPE_PID, nr, &init_pid_ns);
-}
 extern struct task_struct *find_task_by_vpid(pid_t nr);
 extern struct task_struct *find_task_by_pid_ns(pid_t nr,
 		struct pid_namespace *ns);
-- 
cgit v1.2.3


From 24879a8e3e68f146d4d85528cc0b5dea712b77c5 Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <matthias@kaehlcke.net>
Date: Fri, 25 Jul 2008 01:48:38 -0700
Subject: aoe: convert emsgs_sema into a completion

ATA over Ethernet: The semaphore emsgs_sema is used for signalling an
event, convert it in a completion.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/aoe/aoechr.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index c04440cd6a3..181ebb85f0b 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -6,6 +6,7 @@
 
 #include <linux/hdreg.h>
 #include <linux/blkdev.h>
+#include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/smp_lock.h>
 #include "aoe.h"
@@ -36,7 +37,7 @@ struct ErrMsg {
 
 static struct ErrMsg emsgs[NMSG];
 static int emsgs_head_idx, emsgs_tail_idx;
-static struct semaphore emsgs_sema;
+static struct completion emsgs_comp;
 static spinlock_t emsgs_lock;
 static int nblocked_emsgs_readers;
 static struct class *aoe_class;
@@ -141,7 +142,7 @@ bail:		spin_unlock_irqrestore(&emsgs_lock, flags);
 	spin_unlock_irqrestore(&emsgs_lock, flags);
 
 	if (nblocked_emsgs_readers)
-		up(&emsgs_sema);
+		complete(&emsgs_comp);
 }
 
 static ssize_t
@@ -221,7 +222,7 @@ aoechr_read(struct file *filp, char __user *buf, size_t cnt, loff_t *off)
 
 		spin_unlock_irqrestore(&emsgs_lock, flags);
 
-		n = down_interruptible(&emsgs_sema);
+		n = wait_for_completion_interruptible(&emsgs_comp);
 
 		spin_lock_irqsave(&emsgs_lock, flags);
 
@@ -269,7 +270,7 @@ aoechr_init(void)
 		printk(KERN_ERR "aoe: can't register char device\n");
 		return n;
 	}
-	sema_init(&emsgs_sema, 0);
+	init_completion(&emsgs_comp);
 	spin_lock_init(&emsgs_lock);
 	aoe_class = class_create(THIS_MODULE, "aoe");
 	if (IS_ERR(aoe_class)) {
-- 
cgit v1.2.3


From 28325df0d9339b7f3aba9c45174d4586223ef46b Mon Sep 17 00:00:00 2001
From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Date: Fri, 25 Jul 2008 01:48:38 -0700
Subject: markers: use rcu_barrier_sched() and call_rcu_sched()

rcu_barrier_sched() and call_rcu_sched() were introduced in 2.6.26 for the
Markers.  Change the marker code to use them.

It can be seen as a fix since the marker code was using an ugly,
temporary, #ifdef hack to work around CONFIG_PREEMPT_RCU.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Paul McKenney <paulmck@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/marker.c | 25 ++++++++-----------------
 1 file changed, 8 insertions(+), 17 deletions(-)

diff --git a/kernel/marker.c b/kernel/marker.c
index 1abfb923b76..971da531790 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -441,7 +441,7 @@ static int remove_marker(const char *name)
 	hlist_del(&e->hlist);
 	/* Make sure the call_rcu has been executed */
 	if (e->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	kfree(e);
 	return 0;
 }
@@ -476,7 +476,7 @@ static int marker_set_format(struct marker_entry **entry, const char *format)
 	hlist_del(&(*entry)->hlist);
 	/* Make sure the call_rcu has been executed */
 	if ((*entry)->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	kfree(*entry);
 	*entry = e;
 	trace_mark(core_marker_format, "name %s format %s",
@@ -655,7 +655,7 @@ int marker_probe_register(const char *name, const char *format,
 	 * make sure it's executed now.
 	 */
 	if (entry->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	old = marker_entry_add_probe(entry, probe, probe_private);
 	if (IS_ERR(old)) {
 		ret = PTR_ERR(old);
@@ -670,10 +670,7 @@ int marker_probe_register(const char *name, const char *format,
 	entry->rcu_pending = 1;
 	/* write rcu_pending before calling the RCU callback */
 	smp_wmb();
-#ifdef CONFIG_PREEMPT_RCU
-	synchronize_sched();	/* Until we have the call_rcu_sched() */
-#endif
-	call_rcu(&entry->rcu, free_old_closure);
+	call_rcu_sched(&entry->rcu, free_old_closure);
 end:
 	mutex_unlock(&markers_mutex);
 	return ret;
@@ -704,7 +701,7 @@ int marker_probe_unregister(const char *name,
 	if (!entry)
 		goto end;
 	if (entry->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	old = marker_entry_remove_probe(entry, probe, probe_private);
 	mutex_unlock(&markers_mutex);
 	marker_update_probes();		/* may update entry */
@@ -716,10 +713,7 @@ int marker_probe_unregister(const char *name,
 	entry->rcu_pending = 1;
 	/* write rcu_pending before calling the RCU callback */
 	smp_wmb();
-#ifdef CONFIG_PREEMPT_RCU
-	synchronize_sched();	/* Until we have the call_rcu_sched() */
-#endif
-	call_rcu(&entry->rcu, free_old_closure);
+	call_rcu_sched(&entry->rcu, free_old_closure);
 	remove_marker(name);	/* Ignore busy error message */
 	ret = 0;
 end:
@@ -786,7 +780,7 @@ int marker_probe_unregister_private_data(marker_probe_func *probe,
 		goto end;
 	}
 	if (entry->rcu_pending)
-		rcu_barrier();
+		rcu_barrier_sched();
 	old = marker_entry_remove_probe(entry, NULL, probe_private);
 	mutex_unlock(&markers_mutex);
 	marker_update_probes();		/* may update entry */
@@ -797,10 +791,7 @@ int marker_probe_unregister_private_data(marker_probe_func *probe,
 	entry->rcu_pending = 1;
 	/* write rcu_pending before calling the RCU callback */
 	smp_wmb();
-#ifdef CONFIG_PREEMPT_RCU
-	synchronize_sched();	/* Until we have the call_rcu_sched() */
-#endif
-	call_rcu(&entry->rcu, free_old_closure);
+	call_rcu_sched(&entry->rcu, free_old_closure);
 	remove_marker(entry->name);	/* Ignore busy error message */
 end:
 	mutex_unlock(&markers_mutex);
-- 
cgit v1.2.3


From a89cc1959d0ea5f36bf7421dc97b34f03809637d Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 25 Jul 2008 01:48:39 -0700
Subject: markers: fix sparse integer as NULL pointer warning

kernel/trace/trace_sysprof.c:164:20: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/trace/trace_sysprof.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
index 63528086337..ce2d723c10e 100644
--- a/kernel/trace/trace_sysprof.c
+++ b/kernel/trace/trace_sysprof.c
@@ -161,7 +161,7 @@ static void timer_notify(struct pt_regs *regs, int cpu)
 		__trace_special(tr, data, 2, regs->ip, 0);
 
 		while (i < sample_max_depth) {
-			frame.next_fp = 0;
+			frame.next_fp = NULL;
 			frame.return_address = 0;
 			if (!copy_stack_frame(fp, &frame))
 				break;
-- 
cgit v1.2.3


From 7394f0f6c0baab650ea9194cb1be847df646fb57 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 01:48:40 -0700
Subject: unexport uts_sem

With the removal of the Solaris binary emulation the export of
uts_sem became unused.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sys.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/kernel/sys.c b/kernel/sys.c
index 6c218804604..0c9d3fa1f5f 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1343,8 +1343,6 @@ EXPORT_SYMBOL(in_egroup_p);
 
 DECLARE_RWSEM(uts_sem);
 
-EXPORT_SYMBOL(uts_sem);
-
 asmlinkage long sys_newuname(struct new_utsname __user * name)
 {
 	int errno = 0;
-- 
cgit v1.2.3


From 49b5cf34727a6c1be1568ab28e89a2d9a6bf51e0 Mon Sep 17 00:00:00 2001
From: Jonathan Lim <jlim@sgi.com>
Date: Fri, 25 Jul 2008 01:48:40 -0700
Subject: accounting: account for user time when updating memory integrals

Adapt acct_update_integrals() to include user time when calculating the time
difference.  The units of acct_rss_mem1 and acct_vm_mem1 are also changed from
pages-jiffies to pages-usecs to avoid calling jiffies_to_usecs() in
xacct_add_tsk() which might overflow.

Signed-off-by: Jonathan Lim <jlim@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sched.h |  2 +-
 kernel/sched.c        |  2 ++
 kernel/tsacct.c       | 21 ++++++++++++++-------
 3 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index 354ef478a80..af780f299c7 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1257,7 +1257,7 @@ struct task_struct {
 #if defined(CONFIG_TASK_XACCT)
 	u64 acct_rss_mem1;	/* accumulated rss usage */
 	u64 acct_vm_mem1;	/* accumulated virtual memory usage */
-	cputime_t acct_stimexpd;/* stime since last update */
+	cputime_t acct_timexpd;	/* stime + utime since last update */
 #endif
 #ifdef CONFIG_CPUSETS
 	nodemask_t mems_allowed;
diff --git a/kernel/sched.c b/kernel/sched.c
index 6acf749d333..0047bd9b96a 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4046,6 +4046,8 @@ void account_user_time(struct task_struct *p, cputime_t cputime)
 		cpustat->nice = cputime64_add(cpustat->nice, tmp);
 	else
 		cpustat->user = cputime64_add(cpustat->user, tmp);
+	/* Account for user time used */
+	acct_update_integrals(p);
 }
 
 /*
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 4ab1b584961..1da6990af8e 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -84,9 +84,9 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
 {
 	struct mm_struct *mm;
 
-	/* convert pages-jiffies to Mbyte-usec */
-	stats->coremem = jiffies_to_usecs(p->acct_rss_mem1) * PAGE_SIZE / MB;
-	stats->virtmem = jiffies_to_usecs(p->acct_vm_mem1) * PAGE_SIZE / MB;
+	/* convert pages-usec to Mbyte-usec */
+	stats->coremem = p->acct_rss_mem1 * PAGE_SIZE / MB;
+	stats->virtmem = p->acct_vm_mem1 * PAGE_SIZE / MB;
 	mm = get_task_mm(p);
 	if (mm) {
 		/* adjust to KB unit */
@@ -118,12 +118,19 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
 void acct_update_integrals(struct task_struct *tsk)
 {
 	if (likely(tsk->mm)) {
-		long delta = cputime_to_jiffies(
-			cputime_sub(tsk->stime, tsk->acct_stimexpd));
+		cputime_t time, dtime;
+		struct timeval value;
+		u64 delta;
+
+		time = tsk->stime + tsk->utime;
+		dtime = cputime_sub(time, tsk->acct_timexpd);
+		jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
+		delta = value.tv_sec;
+		delta = delta * USEC_PER_SEC + value.tv_usec;
 
 		if (delta == 0)
 			return;
-		tsk->acct_stimexpd = tsk->stime;
+		tsk->acct_timexpd = time;
 		tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
 		tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
 	}
@@ -135,7 +142,7 @@ void acct_update_integrals(struct task_struct *tsk)
  */
 void acct_clear_integrals(struct task_struct *tsk)
 {
-	tsk->acct_stimexpd = 0;
+	tsk->acct_timexpd = 0;
 	tsk->acct_rss_mem1 = 0;
 	tsk->acct_vm_mem1 = 0;
 }
-- 
cgit v1.2.3


From 081e4c8a75692c21f3a119a81ca3270081879d0e Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:42 -0700
Subject: bsdacct: rename acct_gbls to bsd_acct_struct

After I fixed access to task->tgid in kernel/acct.c, Oleg pointed out some
bad side effects with this accounting vs pid namespaces interaction.  I.e.
 when some task in pid namespace sets this accounting up, this blocks all
the others from doing the same.  Restricting this to init namespace only
could help, but didn't look a graceful solution.

So here is the approach to make this accounting work with pid namespaces
properly.

The idea is simple - when a task dies it accounts itself in each namespace
it is visible from and which set the accounting up.

For example here are the commands run and the output of lastcomm from init
and sub namespaces:

init_ns# accton pacct
 sub_ns# accton pacct (this is a different file - sub ns is run in
                       a chroot-ed environment)
init_ns# cat /dev/null
 sub_ns# ls /dev/null
init_ns# accton
 sub_ns# accton

 sub_ns#  lastcomm -f pacct
ls                      0        [136,0]    0.00 secs Thu May 15 10:30
accton                  0        [136,0]    0.00 secs Thu May 15 10:30

init_ns# lastcomm -f pacct
accton                  root     pts/0      0.00 secs Thu May 15 14:30 << got from sub
cat                     root     pts/1      0.00 secs Thu May 15 14:30
ls                      root     pts/0      0.00 secs Thu May 15 14:30 << got from sub
accton                  root     pts/1      0.00 secs Thu May 15 14:30

That was the summary, the details are in patches.

This patch:

It will be visible in pid_namespace.h file, so fix its name to look better
outside the acct.c file.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/acct.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/acct.c b/kernel/acct.c
index 91e1cfd734d..ee3e605190f 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -82,7 +82,7 @@ static void do_acct_process(struct pid_namespace *ns, struct file *);
  * can be placed in the same cache line as the lock.  This primes
  * the cache line to have the data after getting the lock.
  */
-struct acct_glbs {
+struct bsd_acct_struct {
 	spinlock_t		lock;
 	volatile int		active;
 	volatile int		needcheck;
@@ -91,7 +91,7 @@ struct acct_glbs {
 	struct timer_list	timer;
 };
 
-static struct acct_glbs acct_globals __cacheline_aligned =
+static struct bsd_acct_struct acct_globals __cacheline_aligned =
 	{__SPIN_LOCK_UNLOCKED(acct_globals.lock)};
 
 /*
-- 
cgit v1.2.3


From 84406c153a5bfa5d8b428a0933e9d39db6b59a75 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:42 -0700
Subject: pidns: use kzalloc when allocating new pid_namespace struct

It makes many fields initialization implicit helping in auto-setting
#ifdef-ed fields (bsd-acct related pointer will be such).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/pid_namespace.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 98702b4b885..06331cc1c3f 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -71,7 +71,7 @@ static struct pid_namespace *create_pid_namespace(unsigned int level)
 	struct pid_namespace *ns;
 	int i;
 
-	ns = kmem_cache_alloc(pid_ns_cachep, GFP_KERNEL);
+	ns = kmem_cache_zalloc(pid_ns_cachep, GFP_KERNEL);
 	if (ns == NULL)
 		goto out;
 
@@ -84,17 +84,13 @@ static struct pid_namespace *create_pid_namespace(unsigned int level)
 		goto out_free_map;
 
 	kref_init(&ns->kref);
-	ns->last_pid = 0;
-	ns->child_reaper = NULL;
 	ns->level = level;
 
 	set_bit(0, ns->pidmap[0].page);
 	atomic_set(&ns->pidmap[0].nr_free, BITS_PER_PAGE - 1);
 
-	for (i = 1; i < PIDMAP_ENTRIES; i++) {
-		ns->pidmap[i].page = NULL;
+	for (i = 1; i < PIDMAP_ENTRIES; i++)
 		atomic_set(&ns->pidmap[i].nr_free, BITS_PER_PAGE);
-	}
 
 	return ns;
 
-- 
cgit v1.2.3


From 20fad13ac66ac001c19220d3d08b4de5b6cca6e1 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:43 -0700
Subject: pidns: add the struct bsd_acct_struct pointer on pid_namespace struct

All the bsdacct-related info will be stored in the area, pointer by this
one.

It will be NULL automatically for all new namespaces.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/pid_namespace.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index 1a49ab5ec7b..1af82c4e17d 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -14,6 +14,8 @@ struct pidmap {
 
 #define PIDMAP_ENTRIES         ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8)
 
+struct bsd_acct_struct;
+
 struct pid_namespace {
 	struct kref kref;
 	struct pidmap pidmap[PIDMAP_ENTRIES];
@@ -25,6 +27,9 @@ struct pid_namespace {
 #ifdef CONFIG_PROC_FS
 	struct vfsmount *proc_mnt;
 #endif
+#ifdef CONFIG_BSD_PROCESS_ACCT
+	struct bsd_acct_struct *bacct;
+#endif
 };
 
 extern struct pid_namespace init_pid_ns;
-- 
cgit v1.2.3


From 1c552858ac2b1732a99d234d46b98098baef41ff Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:44 -0700
Subject: bsdacct: "truthify" a comment near acct_process

The acct_process does not accept any arguments actually.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/acct.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/kernel/acct.c b/kernel/acct.c
index ee3e605190f..d9ee1838b4d 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -579,7 +579,6 @@ void acct_collect(long exitcode, int group_dead)
 
 /**
  * acct_process - now just a wrapper around do_acct_process
- * @exitcode: task exit code
  *
  * handles process accounting for an exiting task
  */
-- 
cgit v1.2.3


From e59a04a7aa5ce2483470aee4f2eb79ba6b9afe8b Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:44 -0700
Subject: bsdacct: make check timer accept a bsd_acct_struct argument

We're going to have many bsd_acct_struct instances, not just one, so the
timer (currently working with a global one) has to know which one to work
with.

Use a handy setup_timer macro for it (thanks to Oleg for one).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/acct.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/kernel/acct.c b/kernel/acct.c
index d9ee1838b4d..05f8bc094a4 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -97,9 +97,10 @@ static struct bsd_acct_struct acct_globals __cacheline_aligned =
 /*
  * Called whenever the timer says to check the free space.
  */
-static void acct_timeout(unsigned long unused)
+static void acct_timeout(unsigned long x)
 {
-	acct_globals.needcheck = 1;
+	struct bsd_acct_struct *acct = (struct bsd_acct_struct *)x;
+	acct->needcheck = 1;
 }
 
 /*
@@ -193,8 +194,8 @@ static void acct_file_reopen(struct file *file)
 		acct_globals.needcheck = 0;
 		acct_globals.active = 1;
 		/* It's been deleted if it was used before so this is safe */
-		init_timer(&acct_globals.timer);
-		acct_globals.timer.function = acct_timeout;
+		setup_timer(&acct_globals.timer, acct_timeout,
+				(unsigned long)&acct_globals);
 		acct_globals.timer.expires = jiffies + ACCT_TIMEOUT*HZ;
 		add_timer(&acct_globals.timer);
 	}
-- 
cgit v1.2.3


From a75d97976517dcda69150fd81d6be86ae63324a1 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:45 -0700
Subject: bsdacct: turn the acct_lock from on-the-struct to global

Don't use per-bsd-acct-struct lock, but work with a global one.

This lock is taken for short periods, so it doesn't seem it'll become a
bottleneck, but it will allow us to easily avoid many locking difficulties
in the future.

So this is a mostly s/acct_globals.lock/acct_lock/ over the file.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/acct.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/kernel/acct.c b/kernel/acct.c
index 05f8bc094a4..fc71c130497 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -83,7 +83,6 @@ static void do_acct_process(struct pid_namespace *ns, struct file *);
  * the cache line to have the data after getting the lock.
  */
 struct bsd_acct_struct {
-	spinlock_t		lock;
 	volatile int		active;
 	volatile int		needcheck;
 	struct file		*file;
@@ -91,8 +90,9 @@ struct bsd_acct_struct {
 	struct timer_list	timer;
 };
 
-static struct bsd_acct_struct acct_globals __cacheline_aligned =
-	{__SPIN_LOCK_UNLOCKED(acct_globals.lock)};
+static DEFINE_SPINLOCK(acct_lock);
+
+static struct bsd_acct_struct acct_globals __cacheline_aligned;
 
 /*
  * Called whenever the timer says to check the free space.
@@ -114,11 +114,11 @@ static int check_free_space(struct file *file)
 	sector_t resume;
 	sector_t suspend;
 
-	spin_lock(&acct_globals.lock);
+	spin_lock(&acct_lock);
 	res = acct_globals.active;
 	if (!file || !acct_globals.needcheck)
 		goto out;
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 
 	/* May block */
 	if (vfs_statfs(file->f_path.dentry, &sbuf))
@@ -140,7 +140,7 @@ static int check_free_space(struct file *file)
 	 * If some joker switched acct_globals.file under us we'ld better be
 	 * silent and _not_ touch anything.
 	 */
-	spin_lock(&acct_globals.lock);
+	spin_lock(&acct_lock);
 	if (file != acct_globals.file) {
 		if (act)
 			res = act>0;
@@ -165,7 +165,7 @@ static int check_free_space(struct file *file)
 	add_timer(&acct_globals.timer);
 	res = acct_globals.active;
 out:
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 	return res;
 }
 
@@ -173,7 +173,7 @@ out:
  * Close the old accounting file (if currently open) and then replace
  * it with file (if non-NULL).
  *
- * NOTE: acct_globals.lock MUST be held on entry and exit.
+ * NOTE: acct_lock MUST be held on entry and exit.
  */
 static void acct_file_reopen(struct file *file)
 {
@@ -201,11 +201,11 @@ static void acct_file_reopen(struct file *file)
 	}
 	if (old_acct) {
 		mnt_unpin(old_acct->f_path.mnt);
-		spin_unlock(&acct_globals.lock);
+		spin_unlock(&acct_lock);
 		do_acct_process(old_ns, old_acct);
 		filp_close(old_acct, NULL);
 		put_pid_ns(old_ns);
-		spin_lock(&acct_globals.lock);
+		spin_lock(&acct_lock);
 	}
 }
 
@@ -235,10 +235,10 @@ static int acct_on(char *name)
 		return error;
 	}
 
-	spin_lock(&acct_globals.lock);
+	spin_lock(&acct_lock);
 	mnt_pin(file->f_path.mnt);
 	acct_file_reopen(file);
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 
 	mntput(file->f_path.mnt); /* it's pinned, now give up active reference */
 
@@ -272,9 +272,9 @@ asmlinkage long sys_acct(const char __user *name)
 	} else {
 		error = security_acct(NULL);
 		if (!error) {
-			spin_lock(&acct_globals.lock);
+			spin_lock(&acct_lock);
 			acct_file_reopen(NULL);
-			spin_unlock(&acct_globals.lock);
+			spin_unlock(&acct_lock);
 		}
 	}
 	return error;
@@ -289,10 +289,10 @@ asmlinkage long sys_acct(const char __user *name)
  */
 void acct_auto_close_mnt(struct vfsmount *m)
 {
-	spin_lock(&acct_globals.lock);
+	spin_lock(&acct_lock);
 	if (acct_globals.file && acct_globals.file->f_path.mnt == m)
 		acct_file_reopen(NULL);
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 }
 
 /**
@@ -304,12 +304,12 @@ void acct_auto_close_mnt(struct vfsmount *m)
  */
 void acct_auto_close(struct super_block *sb)
 {
-	spin_lock(&acct_globals.lock);
+	spin_lock(&acct_lock);
 	if (acct_globals.file &&
 	    acct_globals.file->f_path.mnt->mnt_sb == sb) {
 		acct_file_reopen(NULL);
 	}
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 }
 
 /*
@@ -594,15 +594,15 @@ void acct_process(void)
 	if (!acct_globals.file)
 		return;
 
-	spin_lock(&acct_globals.lock);
+	spin_lock(&acct_lock);
 	file = acct_globals.file;
 	if (unlikely(!file)) {
-		spin_unlock(&acct_globals.lock);
+		spin_unlock(&acct_lock);
 		return;
 	}
 	get_file(file);
 	ns = get_pid_ns(acct_globals.ns);
-	spin_unlock(&acct_globals.lock);
+	spin_unlock(&acct_lock);
 
 	do_acct_process(ns, file);
 	fput(file);
-- 
cgit v1.2.3


From 6248b1b342005a428b1247b4e89249da1528d88d Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:46 -0700
Subject: bsdacct: make internal code work with passed bsd_acct_struct, not
 global

This adds the appropriate pointer to all the internal (i.e.  static)
functions that work with global acct instance.  API calls pass a global
instance to them (while we still have such).

Mostly this is a s/acct_globals./acct->/ over the file.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/acct.c | 77 ++++++++++++++++++++++++++++++-----------------------------
 1 file changed, 39 insertions(+), 38 deletions(-)

diff --git a/kernel/acct.c b/kernel/acct.c
index fc71c130497..72d4760c8da 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -75,7 +75,8 @@ int acct_parm[3] = {4, 2, 30};
 /*
  * External references and all of the globals.
  */
-static void do_acct_process(struct pid_namespace *ns, struct file *);
+static void do_acct_process(struct bsd_acct_struct *acct,
+		struct pid_namespace *ns, struct file *);
 
 /*
  * This structure is used so that all the data protected by lock
@@ -106,7 +107,7 @@ static void acct_timeout(unsigned long x)
 /*
  * Check the amount of free space and suspend/resume accordingly.
  */
-static int check_free_space(struct file *file)
+static int check_free_space(struct bsd_acct_struct *acct, struct file *file)
 {
 	struct kstatfs sbuf;
 	int res;
@@ -115,8 +116,8 @@ static int check_free_space(struct file *file)
 	sector_t suspend;
 
 	spin_lock(&acct_lock);
-	res = acct_globals.active;
-	if (!file || !acct_globals.needcheck)
+	res = acct->active;
+	if (!file || !acct->needcheck)
 		goto out;
 	spin_unlock(&acct_lock);
 
@@ -137,33 +138,33 @@ static int check_free_space(struct file *file)
 		act = 0;
 
 	/*
-	 * If some joker switched acct_globals.file under us we'ld better be
+	 * If some joker switched acct->file under us we'ld better be
 	 * silent and _not_ touch anything.
 	 */
 	spin_lock(&acct_lock);
-	if (file != acct_globals.file) {
+	if (file != acct->file) {
 		if (act)
 			res = act>0;
 		goto out;
 	}
 
-	if (acct_globals.active) {
+	if (acct->active) {
 		if (act < 0) {
-			acct_globals.active = 0;
+			acct->active = 0;
 			printk(KERN_INFO "Process accounting paused\n");
 		}
 	} else {
 		if (act > 0) {
-			acct_globals.active = 1;
+			acct->active = 1;
 			printk(KERN_INFO "Process accounting resumed\n");
 		}
 	}
 
-	del_timer(&acct_globals.timer);
-	acct_globals.needcheck = 0;
-	acct_globals.timer.expires = jiffies + ACCT_TIMEOUT*HZ;
-	add_timer(&acct_globals.timer);
-	res = acct_globals.active;
+	del_timer(&acct->timer);
+	acct->needcheck = 0;
+	acct->timer.expires = jiffies + ACCT_TIMEOUT*HZ;
+	add_timer(&acct->timer);
+	res = acct->active;
 out:
 	spin_unlock(&acct_lock);
 	return res;
@@ -175,34 +176,33 @@ out:
  *
  * NOTE: acct_lock MUST be held on entry and exit.
  */
-static void acct_file_reopen(struct file *file)
+static void acct_file_reopen(struct bsd_acct_struct *acct, struct file *file)
 {
 	struct file *old_acct = NULL;
 	struct pid_namespace *old_ns = NULL;
 
-	if (acct_globals.file) {
-		old_acct = acct_globals.file;
-		old_ns = acct_globals.ns;
-		del_timer(&acct_globals.timer);
-		acct_globals.active = 0;
-		acct_globals.needcheck = 0;
-		acct_globals.file = NULL;
+	if (acct->file) {
+		old_acct = acct->file;
+		old_ns = acct->ns;
+		del_timer(&acct->timer);
+		acct->active = 0;
+		acct->needcheck = 0;
+		acct->file = NULL;
 	}
 	if (file) {
-		acct_globals.file = file;
-		acct_globals.ns = get_pid_ns(task_active_pid_ns(current));
-		acct_globals.needcheck = 0;
-		acct_globals.active = 1;
+		acct->file = file;
+		acct->ns = get_pid_ns(task_active_pid_ns(current));
+		acct->needcheck = 0;
+		acct->active = 1;
 		/* It's been deleted if it was used before so this is safe */
-		setup_timer(&acct_globals.timer, acct_timeout,
-				(unsigned long)&acct_globals);
-		acct_globals.timer.expires = jiffies + ACCT_TIMEOUT*HZ;
-		add_timer(&acct_globals.timer);
+		setup_timer(&acct->timer, acct_timeout, (unsigned long)acct);
+		acct->timer.expires = jiffies + ACCT_TIMEOUT*HZ;
+		add_timer(&acct->timer);
 	}
 	if (old_acct) {
 		mnt_unpin(old_acct->f_path.mnt);
 		spin_unlock(&acct_lock);
-		do_acct_process(old_ns, old_acct);
+		do_acct_process(acct, old_ns, old_acct);
 		filp_close(old_acct, NULL);
 		put_pid_ns(old_ns);
 		spin_lock(&acct_lock);
@@ -237,7 +237,7 @@ static int acct_on(char *name)
 
 	spin_lock(&acct_lock);
 	mnt_pin(file->f_path.mnt);
-	acct_file_reopen(file);
+	acct_file_reopen(&acct_globals, file);
 	spin_unlock(&acct_lock);
 
 	mntput(file->f_path.mnt); /* it's pinned, now give up active reference */
@@ -273,7 +273,7 @@ asmlinkage long sys_acct(const char __user *name)
 		error = security_acct(NULL);
 		if (!error) {
 			spin_lock(&acct_lock);
-			acct_file_reopen(NULL);
+			acct_file_reopen(&acct_globals, NULL);
 			spin_unlock(&acct_lock);
 		}
 	}
@@ -291,7 +291,7 @@ void acct_auto_close_mnt(struct vfsmount *m)
 {
 	spin_lock(&acct_lock);
 	if (acct_globals.file && acct_globals.file->f_path.mnt == m)
-		acct_file_reopen(NULL);
+		acct_file_reopen(&acct_globals, NULL);
 	spin_unlock(&acct_lock);
 }
 
@@ -307,7 +307,7 @@ void acct_auto_close(struct super_block *sb)
 	spin_lock(&acct_lock);
 	if (acct_globals.file &&
 	    acct_globals.file->f_path.mnt->mnt_sb == sb) {
-		acct_file_reopen(NULL);
+		acct_file_reopen(&acct_globals, NULL);
 	}
 	spin_unlock(&acct_lock);
 }
@@ -426,7 +426,8 @@ static u32 encode_float(u64 value)
 /*
  *  do_acct_process does all actual work. Caller holds the reference to file.
  */
-static void do_acct_process(struct pid_namespace *ns, struct file *file)
+static void do_acct_process(struct bsd_acct_struct *acct,
+		struct pid_namespace *ns, struct file *file)
 {
 	struct pacct_struct *pacct = &current->signal->pacct;
 	acct_t ac;
@@ -441,7 +442,7 @@ static void do_acct_process(struct pid_namespace *ns, struct file *file)
 	 * First check to see if there is enough free_space to continue
 	 * the process accounting system.
 	 */
-	if (!check_free_space(file))
+	if (!check_free_space(acct, file))
 		return;
 
 	/*
@@ -604,7 +605,7 @@ void acct_process(void)
 	ns = get_pid_ns(acct_globals.ns);
 	spin_unlock(&acct_lock);
 
-	do_acct_process(ns, file);
+	do_acct_process(&acct_globals, ns, file);
 	fput(file);
 	put_pid_ns(ns);
 }
-- 
cgit v1.2.3


From 0b6b030fc30d169bb406b34b4fc60d99dde4a9c6 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:47 -0700
Subject: bsdacct: switch from global bsd_acct_struct instance to per-pidns one

Allocate the structure on the first call to sys_acct().  After this each
namespace, that ordered the accounting, will live with this structure till
its own death.

Two notes
- routines, that close the accounting on fs umount time use
  the init_pid_ns's acct by now;
- accounting routine accounts to dying task's namespace
  (also by now).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/acct.h   |  3 ++
 kernel/acct.c          | 84 +++++++++++++++++++++++++++++++++++++++-----------
 kernel/pid_namespace.c |  2 ++
 3 files changed, 71 insertions(+), 18 deletions(-)

diff --git a/include/linux/acct.h b/include/linux/acct.h
index e8cae54e8d8..882dc724876 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -120,17 +120,20 @@ struct acct_v3
 struct vfsmount;
 struct super_block;
 struct pacct_struct;
+struct pid_namespace;
 extern void acct_auto_close_mnt(struct vfsmount *m);
 extern void acct_auto_close(struct super_block *sb);
 extern void acct_init_pacct(struct pacct_struct *pacct);
 extern void acct_collect(long exitcode, int group_dead);
 extern void acct_process(void);
+extern void acct_exit_ns(struct pid_namespace *);
 #else
 #define acct_auto_close_mnt(x)	do { } while (0)
 #define acct_auto_close(x)	do { } while (0)
 #define acct_init_pacct(x)	do { } while (0)
 #define acct_collect(x,y)	do { } while (0)
 #define acct_process()		do { } while (0)
+#define acct_exit_ns(ns)	do { } while (0)
 #endif
 
 /*
diff --git a/kernel/acct.c b/kernel/acct.c
index 72d4760c8da..febbbc67157 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -93,8 +93,6 @@ struct bsd_acct_struct {
 
 static DEFINE_SPINLOCK(acct_lock);
 
-static struct bsd_acct_struct acct_globals __cacheline_aligned;
-
 /*
  * Called whenever the timer says to check the free space.
  */
@@ -176,7 +174,8 @@ out:
  *
  * NOTE: acct_lock MUST be held on entry and exit.
  */
-static void acct_file_reopen(struct bsd_acct_struct *acct, struct file *file)
+static void acct_file_reopen(struct bsd_acct_struct *acct, struct file *file,
+		struct pid_namespace *ns)
 {
 	struct file *old_acct = NULL;
 	struct pid_namespace *old_ns = NULL;
@@ -188,10 +187,11 @@ static void acct_file_reopen(struct bsd_acct_struct *acct, struct file *file)
 		acct->active = 0;
 		acct->needcheck = 0;
 		acct->file = NULL;
+		acct->ns = NULL;
 	}
 	if (file) {
 		acct->file = file;
-		acct->ns = get_pid_ns(task_active_pid_ns(current));
+		acct->ns = ns;
 		acct->needcheck = 0;
 		acct->active = 1;
 		/* It's been deleted if it was used before so this is safe */
@@ -204,7 +204,6 @@ static void acct_file_reopen(struct bsd_acct_struct *acct, struct file *file)
 		spin_unlock(&acct_lock);
 		do_acct_process(acct, old_ns, old_acct);
 		filp_close(old_acct, NULL);
-		put_pid_ns(old_ns);
 		spin_lock(&acct_lock);
 	}
 }
@@ -213,6 +212,8 @@ static int acct_on(char *name)
 {
 	struct file *file;
 	int error;
+	struct pid_namespace *ns;
+	struct bsd_acct_struct *acct = NULL;
 
 	/* Difference from BSD - they don't do O_APPEND */
 	file = filp_open(name, O_WRONLY|O_APPEND|O_LARGEFILE, 0);
@@ -229,18 +230,34 @@ static int acct_on(char *name)
 		return -EIO;
 	}
 
+	ns = task_active_pid_ns(current);
+	if (ns->bacct == NULL) {
+		acct = kzalloc(sizeof(struct bsd_acct_struct), GFP_KERNEL);
+		if (acct == NULL) {
+			filp_close(file, NULL);
+			return -ENOMEM;
+		}
+	}
+
 	error = security_acct(file);
 	if (error) {
+		kfree(acct);
 		filp_close(file, NULL);
 		return error;
 	}
 
 	spin_lock(&acct_lock);
+	if (ns->bacct == NULL) {
+		ns->bacct = acct;
+		acct = NULL;
+	}
+
 	mnt_pin(file->f_path.mnt);
-	acct_file_reopen(&acct_globals, file);
+	acct_file_reopen(ns->bacct, file, ns);
 	spin_unlock(&acct_lock);
 
 	mntput(file->f_path.mnt); /* it's pinned, now give up active reference */
+	kfree(acct);
 
 	return 0;
 }
@@ -270,10 +287,16 @@ asmlinkage long sys_acct(const char __user *name)
 		error = acct_on(tmp);
 		putname(tmp);
 	} else {
+		struct bsd_acct_struct *acct;
+
+		acct = task_active_pid_ns(current)->bacct;
+		if (acct == NULL)
+			return 0;
+
 		error = security_acct(NULL);
 		if (!error) {
 			spin_lock(&acct_lock);
-			acct_file_reopen(&acct_globals, NULL);
+			acct_file_reopen(acct, NULL, NULL);
 			spin_unlock(&acct_lock);
 		}
 	}
@@ -289,9 +312,15 @@ asmlinkage long sys_acct(const char __user *name)
  */
 void acct_auto_close_mnt(struct vfsmount *m)
 {
+	struct bsd_acct_struct *acct;
+
+	acct = init_pid_ns.bacct;
+	if (acct == NULL)
+		return;
+
 	spin_lock(&acct_lock);
-	if (acct_globals.file && acct_globals.file->f_path.mnt == m)
-		acct_file_reopen(&acct_globals, NULL);
+	if (acct->file && acct->file->f_path.mnt == m)
+		acct_file_reopen(acct, NULL, NULL);
 	spin_unlock(&acct_lock);
 }
 
@@ -304,10 +333,29 @@ void acct_auto_close_mnt(struct vfsmount *m)
  */
 void acct_auto_close(struct super_block *sb)
 {
+	struct bsd_acct_struct *acct;
+
+	acct = init_pid_ns.bacct;
+	if (acct == NULL)
+		return;
+
 	spin_lock(&acct_lock);
-	if (acct_globals.file &&
-	    acct_globals.file->f_path.mnt->mnt_sb == sb) {
-		acct_file_reopen(&acct_globals, NULL);
+	if (acct->file && acct->file->f_path.mnt->mnt_sb == sb)
+		acct_file_reopen(acct, NULL, NULL);
+	spin_unlock(&acct_lock);
+}
+
+void acct_exit_ns(struct pid_namespace *ns)
+{
+	struct bsd_acct_struct *acct;
+
+	spin_lock(&acct_lock);
+	acct = ns->bacct;
+	if (acct != NULL) {
+		if (acct->file != NULL)
+			acct_file_reopen(acct, NULL, NULL);
+
+		kfree(acct);
 	}
 	spin_unlock(&acct_lock);
 }
@@ -587,25 +635,25 @@ void acct_collect(long exitcode, int group_dead)
 void acct_process(void)
 {
 	struct file *file = NULL;
-	struct pid_namespace *ns;
+	struct pid_namespace *ns = task_active_pid_ns(current);
+	struct bsd_acct_struct *acct;
 
+	acct = ns->bacct;
 	/*
 	 * accelerate the common fastpath:
 	 */
-	if (!acct_globals.file)
+	if (!acct || !acct->file)
 		return;
 
 	spin_lock(&acct_lock);
-	file = acct_globals.file;
+	file = acct->file;
 	if (unlikely(!file)) {
 		spin_unlock(&acct_lock);
 		return;
 	}
 	get_file(file);
-	ns = get_pid_ns(acct_globals.ns);
 	spin_unlock(&acct_lock);
 
-	do_acct_process(&acct_globals, ns, file);
+	do_acct_process(acct, ns, file);
 	fput(file);
-	put_pid_ns(ns);
 }
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 06331cc1c3f..ea567b78d1a 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -12,6 +12,7 @@
 #include <linux/pid_namespace.h>
 #include <linux/syscalls.h>
 #include <linux/err.h>
+#include <linux/acct.h>
 
 #define BITS_PER_PAGE		(PAGE_SIZE*8)
 
@@ -181,6 +182,7 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
 
 	/* Child reaper for the pid namespace is going away */
 	pid_ns->child_reaper = NULL;
+	acct_exit_ns(pid_ns);
 	return;
 }
 
-- 
cgit v1.2.3


From b5a7174875ea570cc675f2c503e800db8efdd6a7 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:47 -0700
Subject: bsdacct: turn acct off for all pidns-s on umount time

All the bsd_acct_strcts with opened accounting are linked into a global
list.  So, the acct_auto_close(_mnt) walks one and drops the accounting
for each.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/acct.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/kernel/acct.c b/kernel/acct.c
index febbbc67157..7fc9f9dd1e9 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -89,9 +89,11 @@ struct bsd_acct_struct {
 	struct file		*file;
 	struct pid_namespace	*ns;
 	struct timer_list	timer;
+	struct list_head	list;
 };
 
 static DEFINE_SPINLOCK(acct_lock);
+static LIST_HEAD(acct_list);
 
 /*
  * Called whenever the timer says to check the free space.
@@ -188,12 +190,14 @@ static void acct_file_reopen(struct bsd_acct_struct *acct, struct file *file,
 		acct->needcheck = 0;
 		acct->file = NULL;
 		acct->ns = NULL;
+		list_del(&acct->list);
 	}
 	if (file) {
 		acct->file = file;
 		acct->ns = ns;
 		acct->needcheck = 0;
 		acct->active = 1;
+		list_add(&acct->list, &acct_list);
 		/* It's been deleted if it was used before so this is safe */
 		setup_timer(&acct->timer, acct_timeout, (unsigned long)acct);
 		acct->timer.expires = jiffies + ACCT_TIMEOUT*HZ;
@@ -314,13 +318,13 @@ void acct_auto_close_mnt(struct vfsmount *m)
 {
 	struct bsd_acct_struct *acct;
 
-	acct = init_pid_ns.bacct;
-	if (acct == NULL)
-		return;
-
 	spin_lock(&acct_lock);
-	if (acct->file && acct->file->f_path.mnt == m)
-		acct_file_reopen(acct, NULL, NULL);
+restart:
+	list_for_each_entry(acct, &acct_list, list)
+		if (acct->file && acct->file->f_path.mnt == m) {
+			acct_file_reopen(acct, NULL, NULL);
+			goto restart;
+		}
 	spin_unlock(&acct_lock);
 }
 
@@ -335,13 +339,13 @@ void acct_auto_close(struct super_block *sb)
 {
 	struct bsd_acct_struct *acct;
 
-	acct = init_pid_ns.bacct;
-	if (acct == NULL)
-		return;
-
 	spin_lock(&acct_lock);
-	if (acct->file && acct->file->f_path.mnt->mnt_sb == sb)
-		acct_file_reopen(acct, NULL, NULL);
+restart:
+	list_for_each_entry(acct, &acct_list, list)
+		if (acct->file && acct->file->f_path.mnt->mnt_sb == sb) {
+			acct_file_reopen(acct, NULL, NULL);
+			goto restart;
+		}
 	spin_unlock(&acct_lock);
 }
 
-- 
cgit v1.2.3


From 7d1e13505be8c2bd2207894f4e0f069e1f9b51c9 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:48 -0700
Subject: bsdacct: account dying tasks in all relevant namespaces

This just makes the acct_proces walk the pid namespaces from current up to
the top and account a task in each with the accounting turned on.

ns->parent access if safe lockless, since current it still alive and holds
its namespace, which in turn holds its parent.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/acct.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/kernel/acct.c b/kernel/acct.c
index 7fc9f9dd1e9..0feba97e114 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -631,15 +631,9 @@ void acct_collect(long exitcode, int group_dead)
 	spin_unlock_irq(&current->sighand->siglock);
 }
 
-/**
- * acct_process - now just a wrapper around do_acct_process
- *
- * handles process accounting for an exiting task
- */
-void acct_process(void)
+static void acct_process_in_ns(struct pid_namespace *ns)
 {
 	struct file *file = NULL;
-	struct pid_namespace *ns = task_active_pid_ns(current);
 	struct bsd_acct_struct *acct;
 
 	acct = ns->bacct;
@@ -661,3 +655,16 @@ void acct_process(void)
 	do_acct_process(acct, ns, file);
 	fput(file);
 }
+
+/**
+ * acct_process - now just a wrapper around do_acct_process
+ *
+ * handles process accounting for an exiting task
+ */
+void acct_process(void)
+{
+	struct pid_namespace *ns;
+
+	for (ns = task_active_pid_ns(current); ns != NULL; ns = ns->parent)
+		acct_process_in_ns(ns);
+}
-- 
cgit v1.2.3


From 0c18d7a5df82524e634637c3aec24d4cba096442 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Fri, 25 Jul 2008 01:48:49 -0700
Subject: bsdacct: fix and add comments around acct_process()

Fix the one describing what this function is and add one more - about
locking absence around pid namespaces loop.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/acct.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/kernel/acct.c b/kernel/acct.c
index 0feba97e114..dd68b905941 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -657,7 +657,8 @@ static void acct_process_in_ns(struct pid_namespace *ns)
 }
 
 /**
- * acct_process - now just a wrapper around do_acct_process
+ * acct_process - now just a wrapper around acct_process_in_ns,
+ * which in turn is a wrapper around do_acct_process.
  *
  * handles process accounting for an exiting task
  */
@@ -665,6 +666,11 @@ void acct_process(void)
 {
 	struct pid_namespace *ns;
 
+	/*
+	 * This loop is safe lockless, since current is still
+	 * alive and holds its namespace, which in turn holds
+	 * its parent.
+	 */
 	for (ns = task_active_pid_ns(current); ns != NULL; ns = ns->parent)
 		acct_process_in_ns(ns);
 }
-- 
cgit v1.2.3


From 297c5d92634c809cef23d73e7b2556f2528ff7e2 Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Fri, 25 Jul 2008 01:48:49 -0700
Subject: task IO accounting: provide distinct tgid/tid I/O statistics

Report per-thread I/O statistics in /proc/pid/task/tid/io and aggregate
parent I/O statistics in /proc/pid/io.  This approach follows the same
model used to account per-process and per-thread CPU times.

As a practial application, this allows for example to quickly find the top
I/O consumer when a process spawns many child threads that perform the
actual I/O work, because the aggregated I/O statistics can always be found
in /proc/pid/io.

[ Oleg Nesterov points out that we should check that the task is still
  alive before we iterate over the threads, but also says that we can do
  that fixup on top of this later.  - Linus ]

Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Matt Heaton <matt@hostmonster.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Acked-by-with-comments: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/base.c        | 86 ++++++++++++++++++++++++++++++++++++++++++---------
 include/linux/sched.h |  4 +++
 kernel/exit.c         | 27 ++++++++++++++++
 kernel/fork.c         |  6 ++++
 4 files changed, 108 insertions(+), 15 deletions(-)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index 58c3e6a8e15..a891fe4cb43 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2376,29 +2376,82 @@ static int proc_base_fill_cache(struct file *filp, void *dirent,
 }
 
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-static int proc_pid_io_accounting(struct task_struct *task, char *buffer)
-{
+static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
+{
+	u64 rchar, wchar, syscr, syscw;
+	struct task_io_accounting ioac;
+
+	if (!whole) {
+		rchar = task->rchar;
+		wchar = task->wchar;
+		syscr = task->syscr;
+		syscw = task->syscw;
+		memcpy(&ioac, &task->ioac, sizeof(ioac));
+	} else {
+		unsigned long flags;
+		struct task_struct *t = task;
+		rchar = wchar = syscr = syscw = 0;
+		memset(&ioac, 0, sizeof(ioac));
+
+		rcu_read_lock();
+		do {
+			rchar += t->rchar;
+			wchar += t->wchar;
+			syscr += t->syscr;
+			syscw += t->syscw;
+
+			ioac.read_bytes += t->ioac.read_bytes;
+			ioac.write_bytes += t->ioac.write_bytes;
+			ioac.cancelled_write_bytes +=
+					t->ioac.cancelled_write_bytes;
+			t = next_thread(t);
+		} while (t != task);
+		rcu_read_unlock();
+
+		if (lock_task_sighand(task, &flags)) {
+			struct signal_struct *sig = task->signal;
+
+			rchar += sig->rchar;
+			wchar += sig->wchar;
+			syscr += sig->syscr;
+			syscw += sig->syscw;
+
+			ioac.read_bytes += sig->ioac.read_bytes;
+			ioac.write_bytes += sig->ioac.write_bytes;
+			ioac.cancelled_write_bytes +=
+					sig->ioac.cancelled_write_bytes;
+
+			unlock_task_sighand(task, &flags);
+		}
+	}
+
 	return sprintf(buffer,
-#ifdef CONFIG_TASK_XACCT
 			"rchar: %llu\n"
 			"wchar: %llu\n"
 			"syscr: %llu\n"
 			"syscw: %llu\n"
-#endif
 			"read_bytes: %llu\n"
 			"write_bytes: %llu\n"
 			"cancelled_write_bytes: %llu\n",
-#ifdef CONFIG_TASK_XACCT
-			(unsigned long long)task->rchar,
-			(unsigned long long)task->wchar,
-			(unsigned long long)task->syscr,
-			(unsigned long long)task->syscw,
-#endif
-			(unsigned long long)task->ioac.read_bytes,
-			(unsigned long long)task->ioac.write_bytes,
-			(unsigned long long)task->ioac.cancelled_write_bytes);
+			(unsigned long long)rchar,
+			(unsigned long long)wchar,
+			(unsigned long long)syscr,
+			(unsigned long long)syscw,
+			(unsigned long long)ioac.read_bytes,
+			(unsigned long long)ioac.write_bytes,
+			(unsigned long long)ioac.cancelled_write_bytes);
+}
+
+static int proc_tid_io_accounting(struct task_struct *task, char *buffer)
+{
+	return do_io_accounting(task, buffer, 0);
 }
-#endif
+
+static int proc_tgid_io_accounting(struct task_struct *task, char *buffer)
+{
+	return do_io_accounting(task, buffer, 1);
+}
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
 
 /*
  * Thread groups
@@ -2470,7 +2523,7 @@ static const struct pid_entry tgid_base_stuff[] = {
 	REG("coredump_filter", S_IRUGO|S_IWUSR, coredump_filter),
 #endif
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-	INF("io",	S_IRUGO, pid_io_accounting),
+	INF("io",	S_IRUGO, tgid_io_accounting),
 #endif
 };
 
@@ -2797,6 +2850,9 @@ static const struct pid_entry tid_base_stuff[] = {
 #ifdef CONFIG_FAULT_INJECTION
 	REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject),
 #endif
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+	INF("io",	S_IRUGO, tid_io_accounting),
+#endif
 };
 
 static int proc_tid_base_readdir(struct file * filp,
diff --git a/include/linux/sched.h b/include/linux/sched.h
index af780f299c7..d22ffe06d0e 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -506,6 +506,10 @@ struct signal_struct {
 	unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
 	unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
 	unsigned long inblock, oublock, cinblock, coublock;
+#ifdef CONFIG_TASK_XACCT
+	u64 rchar, wchar, syscr, syscw;
+#endif
+	struct task_io_accounting ioac;
 
 	/*
 	 * Cumulative ns of scheduled CPU time for dead threads in the
diff --git a/kernel/exit.c b/kernel/exit.c
index 8a4d4d12e29..ad933bb29ec 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -120,6 +120,18 @@ static void __exit_signal(struct task_struct *tsk)
 		sig->nivcsw += tsk->nivcsw;
 		sig->inblock += task_io_get_inblock(tsk);
 		sig->oublock += task_io_get_oublock(tsk);
+#ifdef CONFIG_TASK_XACCT
+		sig->rchar += tsk->rchar;
+		sig->wchar += tsk->wchar;
+		sig->syscr += tsk->syscr;
+		sig->syscw += tsk->syscw;
+#endif /* CONFIG_TASK_XACCT */
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+		sig->ioac.read_bytes += tsk->ioac.read_bytes;
+		sig->ioac.write_bytes += tsk->ioac.write_bytes;
+		sig->ioac.cancelled_write_bytes +=
+					tsk->ioac.cancelled_write_bytes;
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
 		sig->sum_sched_runtime += tsk->se.sum_exec_runtime;
 		sig = NULL; /* Marker for below. */
 	}
@@ -1366,6 +1378,21 @@ static int wait_task_zombie(struct task_struct *p, int options,
 		psig->coublock +=
 			task_io_get_oublock(p) +
 			sig->oublock + sig->coublock;
+#ifdef CONFIG_TASK_XACCT
+		psig->rchar += p->rchar + sig->rchar;
+		psig->wchar += p->wchar + sig->wchar;
+		psig->syscr += p->syscr + sig->syscr;
+		psig->syscw += p->syscw + sig->syscw;
+#endif /* CONFIG_TASK_XACCT */
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+		psig->ioac.read_bytes +=
+			p->ioac.read_bytes + sig->ioac.read_bytes;
+		psig->ioac.write_bytes +=
+			p->ioac.write_bytes + sig->ioac.write_bytes;
+		psig->ioac.cancelled_write_bytes +=
+				p->ioac.cancelled_write_bytes +
+				sig->ioac.cancelled_write_bytes;
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
 		spin_unlock_irq(&p->parent->sighand->siglock);
 	}
 
diff --git a/kernel/fork.c b/kernel/fork.c
index 813d5c89b9d..b99d73e971a 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -812,6 +812,12 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 	sig->nvcsw = sig->nivcsw = sig->cnvcsw = sig->cnivcsw = 0;
 	sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt = 0;
 	sig->inblock = sig->oublock = sig->cinblock = sig->coublock = 0;
+#ifdef CONFIG_TASK_XACCT
+	sig->rchar = sig->wchar = sig->syscr = sig->syscw = 0;
+#endif
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+	memset(&sig->ioac, 0, sizeof(sig->ioac));
+#endif
 	sig->sum_sched_runtime = 0;
 	INIT_LIST_HEAD(&sig->cpu_timers[0]);
 	INIT_LIST_HEAD(&sig->cpu_timers[1]);
-- 
cgit v1.2.3


From 3e85ba034deec351f02cb55ff225bbd616463841 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 25 Jul 2008 01:48:50 -0700
Subject: tsacct: fix bacct_add_tsk()'s use of do_div()

Fix bacct_add_tsk()'s use of do_div() on an s64 by making ac_etime a u64
instead and dividing that.

Possibly this should be guarded lest the interval calculation turn up
negative, but the possible negativity of the result of the division is
cast away, and it shouldn't end up negative anyway.

This was introduced by patch f3cef7a99469afc159fec3a61b42dc7ca5b6824f.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/tsacct.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 1da6990af8e..3da47ccdc5e 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -28,14 +28,14 @@
 void bacct_add_tsk(struct taskstats *stats, struct task_struct *tsk)
 {
 	struct timespec uptime, ts;
-	s64 ac_etime;
+	u64 ac_etime;
 
 	BUILD_BUG_ON(TS_COMM_LEN < TASK_COMM_LEN);
 
 	/* calculate task elapsed time in timespec */
 	do_posix_clock_monotonic_gettime(&uptime);
 	ts = timespec_sub(uptime, tsk->start_time);
-	/* rebase elapsed time to usec */
+	/* rebase elapsed time to usec (should never be negative) */
 	ac_etime = timespec_to_ns(&ts);
 	do_div(ac_etime, NSEC_PER_USEC);
 	stats->ac_etime = ac_etime;
-- 
cgit v1.2.3


From 873b47717732c2f33a4b14de02571a4295a02f0c Mon Sep 17 00:00:00 2001
From: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Date: Fri, 25 Jul 2008 01:48:52 -0700
Subject: per-task-delay-accounting: add memory reclaim delay

Sometimes, application responses become bad under heavy memory load.
Applications take a bit time to reclaim memory.  The statistics, how long
memory reclaim takes, will be useful to measure memory usage.

This patch adds accounting memory reclaim to per-task-delay-accounting for
accounting the time of do_try_to_free_pages().

<i.e>

- When System is under low memory load,
  memory reclaim may not occur.

$ free
             total       used       free     shared    buffers     cached
Mem:       8197800    1577300    6620500          0       4808    1516724
-/+ buffers/cache:      55768    8142032
Swap:     16386292          0   16386292

$ vmstat 1
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
 0  0      0 5069748  10612 3014060    0    0     0     0    3   26  0  0 100  0
 0  0      0 5069748  10612 3014060    0    0     0     0    4   22  0  0 100  0
 0  0      0 5069748  10612 3014060    0    0     0     0    3   18  0  0 100  0

Measure the time of tar command.

$ ls -s test.dat
1501472 test.dat

$ time tar cvf test.tar test.dat
real    0m13.388s
user    0m0.116s
sys     0m5.304s

$ ./delayget -d -p <pid>
CPU             count     real total  virtual total    delay total
                  428     5528345500     5477116080       62749891
IO              count    delay total
                  338     8078977189
SWAP            count    delay total
                    0              0
RECLAIM         count    delay total
                    0              0

- When system is under heavy memory load
  memory reclaim may occur.

$ vmstat 1
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
 0  0 7159032  49724   1812   3012    0    0     0     0    3   24  0  0 100  0
 0  0 7159032  49724   1812   3012    0    0     0     0    4   24  0  0 100  0
 0  0 7159032  49848   1812   3012    0    0     0     0    3   22  0  0 100  0

In this case, one process uses more 8G memory
by execution of malloc() and memset().

$ time tar cvf test.tar test.dat
real    1m38.563s        <-  increased by 85 sec
user    0m0.140s
sys     0m7.060s

$ ./delayget -d -p <pid>
CPU             count     real total  virtual total    delay total
                 9021     7140446250     7315277975      923201824
IO              count    delay total
                 8965    90466349669
SWAP            count    delay total
                    3       21036367
RECLAIM         count    delay total
                  740    61011951153

In the later case, the value of RECLAIM is increasing.
So, taskstats can show how much memory reclaim influences TAT.

Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/delayacct.h | 19 +++++++++++++++++++
 include/linux/sched.h     |  4 ++++
 kernel/delayacct.c        | 13 +++++++++++++
 mm/vmscan.c               |  5 +++++
 4 files changed, 41 insertions(+)

diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h
index ab94bc08355..f352f06fa06 100644
--- a/include/linux/delayacct.h
+++ b/include/linux/delayacct.h
@@ -39,6 +39,8 @@ extern void __delayacct_blkio_start(void);
 extern void __delayacct_blkio_end(void);
 extern int __delayacct_add_tsk(struct taskstats *, struct task_struct *);
 extern __u64 __delayacct_blkio_ticks(struct task_struct *);
+extern void __delayacct_freepages_start(void);
+extern void __delayacct_freepages_end(void);
 
 static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
 {
@@ -107,6 +109,18 @@ static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
 	return 0;
 }
 
+static inline void delayacct_freepages_start(void)
+{
+	if (current->delays)
+		__delayacct_freepages_start();
+}
+
+static inline void delayacct_freepages_end(void)
+{
+	if (current->delays)
+		__delayacct_freepages_end();
+}
+
 #else
 static inline void delayacct_set_flag(int flag)
 {}
@@ -129,6 +143,11 @@ static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
 { return 0; }
 static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
 { return 0; }
+static inline void delayacct_freepages_start(void)
+{}
+static inline void delayacct_freepages_end(void)
+{}
+
 #endif /* CONFIG_TASK_DELAY_ACCT */
 
 #endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index d22ffe06d0e..42036ffe6b0 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -672,6 +672,10 @@ struct task_delay_info {
 				/* io operations performed */
 	u32 swapin_count;	/* total count of the number of swapin block */
 				/* io operations performed */
+
+	struct timespec freepages_start, freepages_end;
+	u64 freepages_delay;	/* wait for memory reclaim */
+	u32 freepages_count;	/* total count of memory reclaim */
 };
 #endif	/* CONFIG_TASK_DELAY_ACCT */
 
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index 10e43fd8b72..84b6782a2ce 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -165,3 +165,16 @@ __u64 __delayacct_blkio_ticks(struct task_struct *tsk)
 	return ret;
 }
 
+void __delayacct_freepages_start(void)
+{
+	delayacct_start(&current->delays->freepages_start);
+}
+
+void __delayacct_freepages_end(void)
+{
+	delayacct_end(&current->delays->freepages_start,
+			&current->delays->freepages_end,
+			&current->delays->freepages_delay,
+			&current->delays->freepages_count);
+}
+
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 967d30ccd92..26672c6cd3c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -38,6 +38,7 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 #include <linux/memcontrol.h>
+#include <linux/delayacct.h>
 
 #include <asm/tlbflush.h>
 #include <asm/div64.h>
@@ -1316,6 +1317,8 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 	struct zone *zone;
 	enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
 
+	delayacct_freepages_start();
+
 	if (scan_global_lru(sc))
 		count_vm_event(ALLOCSTALL);
 	/*
@@ -1396,6 +1399,8 @@ out:
 	} else
 		mem_cgroup_record_reclaim_priority(sc->mem_cgroup, priority);
 
+	delayacct_freepages_end();
+
 	return ret;
 }
 
-- 
cgit v1.2.3


From 016ae219b920c4e606088761d3d6070cdf8ba706 Mon Sep 17 00:00:00 2001
From: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Date: Fri, 25 Jul 2008 01:48:53 -0700
Subject: per-task-delay-accounting: update taskstats for memory reclaim delay

Add members for memory reclaim delay to taskstats, and accumulate them in
__delayacct_add_tsk() .

Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/accounting/taskstats-struct.txt | 7 +++++++
 include/linux/taskstats.h                     | 6 +++++-
 kernel/delayacct.c                            | 3 +++
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt
index cd784f46bf8..b988d110db5 100644
--- a/Documentation/accounting/taskstats-struct.txt
+++ b/Documentation/accounting/taskstats-struct.txt
@@ -26,6 +26,8 @@ There are three different groups of fields in the struct taskstats:
 
 5) Time accounting for SMT machines
 
+6) Extended delay accounting fields for memory reclaim
+
 Future extension should add fields to the end of the taskstats struct, and
 should not change the relative position of each field within the struct.
 
@@ -170,4 +172,9 @@ struct taskstats {
 	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
 	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
 	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
+
+6) Extended delay accounting fields for memory reclaim
+	/* Delay waiting for memory reclaim */
+	__u64	freepages_count;
+	__u64	freepages_delay_total;
 }
diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h
index 5d69c0744ff..18269e956a7 100644
--- a/include/linux/taskstats.h
+++ b/include/linux/taskstats.h
@@ -31,7 +31,7 @@
  */
 
 
-#define TASKSTATS_VERSION	6
+#define TASKSTATS_VERSION	7
 #define TS_COMM_LEN		32	/* should be >= TASK_COMM_LEN
 					 * in linux/sched.h */
 
@@ -157,6 +157,10 @@ struct taskstats {
 	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
 	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
 	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
+
+	/* Delay waiting for memory reclaim */
+	__u64	freepages_count;
+	__u64	freepages_delay_total;
 };
 
 
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index 84b6782a2ce..b3179dad71b 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -145,8 +145,11 @@ int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk)
 	d->blkio_delay_total = (tmp < d->blkio_delay_total) ? 0 : tmp;
 	tmp = d->swapin_delay_total + tsk->delays->swapin_delay;
 	d->swapin_delay_total = (tmp < d->swapin_delay_total) ? 0 : tmp;
+	tmp = d->freepages_delay_total + tsk->delays->freepages_delay;
+	d->freepages_delay_total = (tmp < d->freepages_delay_total) ? 0 : tmp;
 	d->blkio_count += tsk->delays->blkio_count;
 	d->swapin_count += tsk->delays->swapin_count;
+	d->freepages_count += tsk->delays->freepages_count;
 	spin_unlock_irqrestore(&tsk->delays->lock, flags);
 
 done:
-- 
cgit v1.2.3


From 9b0975a20af1ff2f367e3b6b7c150eb114c6b500 Mon Sep 17 00:00:00 2001
From: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Date: Fri, 25 Jul 2008 01:48:54 -0700
Subject: per-task-delay-accounting: update document and getdelays.c for memory
 reclaim

Update document and make getdelays.c show delay accounting for memory reclaim.

For making a distinction between "swapping in pages" and "memory reclaim"
in getdelays.c, MEM is changed to SWAP.

Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/accounting/delay-accounting.txt | 11 ++++++++---
 Documentation/accounting/getdelays.c          |  8 ++++++--
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/Documentation/accounting/delay-accounting.txt b/Documentation/accounting/delay-accounting.txt
index 1443cd71d26..8a12f0730c9 100644
--- a/Documentation/accounting/delay-accounting.txt
+++ b/Documentation/accounting/delay-accounting.txt
@@ -11,6 +11,7 @@ the delays experienced by a task while
 a) waiting for a CPU (while being runnable)
 b) completion of synchronous block I/O initiated by the task
 c) swapping in pages
+d) memory reclaim
 
 and makes these statistics available to userspace through
 the taskstats interface.
@@ -41,7 +42,7 @@ this structure. See
      include/linux/taskstats.h
 for a description of the fields pertaining to delay accounting.
 It will generally be in the form of counters returning the cumulative
-delay seen for cpu, sync block I/O, swapin etc.
+delay seen for cpu, sync block I/O, swapin, memory reclaim etc.
 
 Taking the difference of two successive readings of a given
 counter (say cpu_delay_total) for a task will give the delay
@@ -94,7 +95,9 @@ CPU	count	real total	virtual total	delay total
 	7876	92005750	100000000	24001500
 IO	count	delay total
 	0	0
-MEM	count	delay total
+SWAP	count	delay total
+	0	0
+RECLAIM	count	delay total
 	0	0
 
 Get delays seen in executing a given simple command
@@ -108,5 +111,7 @@ CPU	count	real total	virtual total	delay total
 	6	4000250		4000000		0
 IO	count	delay total
 	0	0
-MEM	count	delay total
+SWAP	count	delay total
+	0	0
+RECLAIM	count	delay total
 	0	0
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 40121b5cca1..3f7755f3963 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -196,14 +196,18 @@ void print_delayacct(struct taskstats *t)
 	       "      %15llu%15llu%15llu%15llu\n"
 	       "IO    %15s%15s\n"
 	       "      %15llu%15llu\n"
-	       "MEM   %15s%15s\n"
+	       "SWAP  %15s%15s\n"
+	       "      %15llu%15llu\n"
+	       "RECLAIM  %12s%15s\n"
 	       "      %15llu%15llu\n",
 	       "count", "real total", "virtual total", "delay total",
 	       t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
 	       t->cpu_delay_total,
 	       "count", "delay total",
 	       t->blkio_count, t->blkio_delay_total,
-	       "count", "delay total", t->swapin_count, t->swapin_delay_total);
+	       "count", "delay total", t->swapin_count, t->swapin_delay_total,
+	       "count", "delay total",
+	       t->freepages_count, t->freepages_delay_total);
 }
 
 void task_context_switch_counts(struct taskstats *t)
-- 
cgit v1.2.3


From b81f3ea92ba1fa676775677679889dc2a7f03c8b Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Fri, 25 Jul 2008 01:48:55 -0700
Subject: taskstats: remove initialization of static per-cpu variable

Cc: Shailabh Nagar <nagar@watson.ibm.com>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/taskstats.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index 06b17547f4e..bd6be76303c 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -35,7 +35,7 @@
  */
 #define TASKSTATS_CPUMASK_MAXLEN	(100+6*NR_CPUS)
 
-static DEFINE_PER_CPU(__u32, taskstats_seqnum) = { 0 };
+static DEFINE_PER_CPU(__u32, taskstats_seqnum);
 static int family_registered;
 struct kmem_cache *taskstats_cache;
 
-- 
cgit v1.2.3


From cc77b1521d06be07c9bb1a4a3e1f775dcaa15093 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri, 25 Jul 2008 01:48:55 -0700
Subject: lockd: dont return EAGAIN for a permanent error

Fix nlm_fopen() to return NLM_FAILED (or NLM_LCK_DENIED_NOLOCKS) instead
of NLM_LCK_DENIED.  The latter means the lock request failed because of a
conflicting lock (i.e.  a temporary error), which is wrong in this case.

Also fix the client to return ENOLCK instead of EAGAIN if a blocking lock
request returns with NLM_LOCK_DENIED.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/lockd/clntproc.c | 10 +++++++++-
 fs/nfsd/lockd.c     | 13 +++++++++----
 2 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index 1f6dc518505..31668b690e0 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -582,7 +582,15 @@ again:
 	}
 	if (status < 0)
 		goto out_unlock;
-	status = nlm_stat_to_errno(resp->status);
+	/*
+	 * EAGAIN doesn't make sense for sleeping locks, and in some
+	 * cases NLM_LCK_DENIED is returned for a permanent error.  So
+	 * turn it into an ENOLCK.
+	 */
+	if (resp->status == nlm_lck_denied && (fl_flags & FL_SLEEP))
+		status = -ENOLCK;
+	else
+		status = nlm_stat_to_errno(resp->status);
 out_unblock:
 	nlmclnt_finish_block(block);
 out:
diff --git a/fs/nfsd/lockd.c b/fs/nfsd/lockd.c
index 6b6225ac492..15c6faeec77 100644
--- a/fs/nfsd/lockd.c
+++ b/fs/nfsd/lockd.c
@@ -19,6 +19,13 @@
 
 #define NFSDDBG_FACILITY		NFSDDBG_LOCKD
 
+#ifdef CONFIG_LOCKD_V4
+#define nlm_stale_fh	nlm4_stale_fh
+#define nlm_failed	nlm4_failed
+#else
+#define nlm_stale_fh	nlm_lck_denied_nolocks
+#define nlm_failed	nlm_lck_denied_nolocks
+#endif
 /*
  * Note: we hold the dentry use count while the file is open.
  */
@@ -47,12 +54,10 @@ nlm_fopen(struct svc_rqst *rqstp, struct nfs_fh *f, struct file **filp)
 		return 0;
 	case nfserr_dropit:
 		return nlm_drop_reply;
-#ifdef CONFIG_LOCKD_V4
 	case nfserr_stale:
-		return nlm4_stale_fh;
-#endif
+		return nlm_stale_fh;
 	default:
-		return nlm_lck_denied;
+		return nlm_failed;
 	}
 }
 
-- 
cgit v1.2.3


From bde74e4bc64415b142e556a34d295a52a1b7da9d Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri, 25 Jul 2008 01:48:57 -0700
Subject: locks: add special return value for asynchronous locks

Use a special error value FILE_LOCK_DEFERRED to mean that a locking
operation returned asynchronously.  This is returned by

  posix_lock_file() for sleeping locks to mean that the lock has been
  queued on the block list, and will be woken up when it might become
  available and needs to be retried (either fl_lmops->fl_notify() is
  called or fl_wait is woken up).

  f_op->lock() to mean either the above, or that the filesystem will
  call back with fl_lmops->fl_grant() when the result of the locking
  operation is known.  The filesystem can do this for sleeping as well
  as non-sleeping locks.

This is to make sure, that return values of -EAGAIN and -EINPROGRESS by
filesystems are not mistaken to mean an asynchronous locking.

This also makes error handling in fs/locks.c and lockd/svclock.c slightly
cleaner.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/dlm/plock.c     |  2 +-
 fs/lockd/svclock.c | 13 ++++---------
 fs/locks.c         | 28 ++++++++++++++--------------
 include/linux/fs.h |  6 ++++++
 4 files changed, 25 insertions(+), 24 deletions(-)

diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index 78878c5781c..eba87ff3177 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -116,7 +116,7 @@ int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 	if (xop->callback == NULL)
 		wait_event(recv_wq, (op->done != 0));
 	else {
-		rv = -EINPROGRESS;
+		rv = FILE_LOCK_DEFERRED;
 		goto out;
 	}
 
diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c
index 821b9acdfb6..cf0d5c2c318 100644
--- a/fs/lockd/svclock.c
+++ b/fs/lockd/svclock.c
@@ -418,8 +418,8 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file,
 			goto out;
 		case -EAGAIN:
 			ret = nlm_lck_denied;
-			break;
-		case -EINPROGRESS:
+			goto out;
+		case FILE_LOCK_DEFERRED:
 			if (wait)
 				break;
 			/* Filesystem lock operation is in progress
@@ -434,10 +434,6 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file,
 			goto out;
 	}
 
-	ret = nlm_lck_denied;
-	if (!wait)
-		goto out;
-
 	ret = nlm_lck_blocked;
 
 	/* Append to list of blocked */
@@ -507,7 +503,7 @@ nlmsvc_testlock(struct svc_rqst *rqstp, struct nlm_file *file,
 	}
 
 	error = vfs_test_lock(file->f_file, &lock->fl);
-	if (error == -EINPROGRESS) {
+	if (error == FILE_LOCK_DEFERRED) {
 		ret = nlmsvc_defer_lock_rqst(rqstp, block);
 		goto out;
 	}
@@ -731,8 +727,7 @@ nlmsvc_grant_blocked(struct nlm_block *block)
 	switch (error) {
 	case 0:
 		break;
-	case -EAGAIN:
-	case -EINPROGRESS:
+	case FILE_LOCK_DEFERRED:
 		dprintk("lockd: lock still blocked error %d\n", error);
 		nlmsvc_insert_block(block, NLM_NEVER);
 		nlmsvc_release_block(block);
diff --git a/fs/locks.c b/fs/locks.c
index dce8c747371..1ce57b4b362 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -779,8 +779,10 @@ find_conflict:
 		if (!flock_locks_conflict(request, fl))
 			continue;
 		error = -EAGAIN;
-		if (request->fl_flags & FL_SLEEP)
-			locks_insert_block(fl, request);
+		if (!(request->fl_flags & FL_SLEEP))
+			goto out;
+		error = FILE_LOCK_DEFERRED;
+		locks_insert_block(fl, request);
 		goto out;
 	}
 	if (request->fl_flags & FL_ACCESS)
@@ -836,7 +838,7 @@ static int __posix_lock_file(struct inode *inode, struct file_lock *request, str
 			error = -EDEADLK;
 			if (posix_locks_deadlock(request, fl))
 				goto out;
-			error = -EAGAIN;
+			error = FILE_LOCK_DEFERRED;
 			locks_insert_block(fl, request);
 			goto out;
   		}
@@ -1035,7 +1037,7 @@ int posix_lock_file_wait(struct file *filp, struct file_lock *fl)
 	might_sleep ();
 	for (;;) {
 		error = posix_lock_file(filp, fl, NULL);
-		if ((error != -EAGAIN) || !(fl->fl_flags & FL_SLEEP))
+		if (error != FILE_LOCK_DEFERRED)
 			break;
 		error = wait_event_interruptible(fl->fl_wait, !fl->fl_next);
 		if (!error)
@@ -1107,9 +1109,7 @@ int locks_mandatory_area(int read_write, struct inode *inode,
 
 	for (;;) {
 		error = __posix_lock_file(inode, &fl, NULL);
-		if (error != -EAGAIN)
-			break;
-		if (!(fl.fl_flags & FL_SLEEP))
+		if (error != FILE_LOCK_DEFERRED)
 			break;
 		error = wait_event_interruptible(fl.fl_wait, !fl.fl_next);
 		if (!error) {
@@ -1531,7 +1531,7 @@ int flock_lock_file_wait(struct file *filp, struct file_lock *fl)
 	might_sleep();
 	for (;;) {
 		error = flock_lock_file(filp, fl);
-		if ((error != -EAGAIN) || !(fl->fl_flags & FL_SLEEP))
+		if (error != FILE_LOCK_DEFERRED)
 			break;
 		error = wait_event_interruptible(fl->fl_wait, !fl->fl_next);
 		if (!error)
@@ -1716,17 +1716,17 @@ out:
  * fl_grant is set. Callers expecting ->lock() to return asynchronously
  * will only use F_SETLK, not F_SETLKW; they will set FL_SLEEP if (and only if)
  * the request is for a blocking lock. When ->lock() does return asynchronously,
- * it must return -EINPROGRESS, and call ->fl_grant() when the lock
+ * it must return FILE_LOCK_DEFERRED, and call ->fl_grant() when the lock
  * request completes.
  * If the request is for non-blocking lock the file system should return
- * -EINPROGRESS then try to get the lock and call the callback routine with
- * the result. If the request timed out the callback routine will return a
+ * FILE_LOCK_DEFERRED then try to get the lock and call the callback routine
+ * with the result. If the request timed out the callback routine will return a
  * nonzero return code and the file system should release the lock. The file
  * system is also responsible to keep a corresponding posix lock when it
  * grants a lock so the VFS can find out which locks are locally held and do
  * the correct lock cleanup when required.
  * The underlying filesystem must not drop the kernel lock or call
- * ->fl_grant() before returning to the caller with a -EINPROGRESS
+ * ->fl_grant() before returning to the caller with a FILE_LOCK_DEFERRED
  * return code.
  */
 int vfs_lock_file(struct file *filp, unsigned int cmd, struct file_lock *fl, struct file_lock *conf)
@@ -1804,7 +1804,7 @@ again:
 	else {
 		for (;;) {
 			error = posix_lock_file(filp, file_lock, NULL);
-			if (error != -EAGAIN || cmd == F_SETLK)
+			if (error != FILE_LOCK_DEFERRED)
 				break;
 			error = wait_event_interruptible(file_lock->fl_wait,
 					!file_lock->fl_next);
@@ -1941,7 +1941,7 @@ again:
 	else {
 		for (;;) {
 			error = posix_lock_file(filp, file_lock, NULL);
-			if (error != -EAGAIN || cmd == F_SETLK64)
+			if (error != FILE_LOCK_DEFERRED)
 				break;
 			error = wait_event_interruptible(file_lock->fl_wait,
 					!file_lock->fl_next);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 4b86f806014..49d8eb7a71b 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -885,6 +885,12 @@ static inline int file_check_writeable(struct file *filp)
 #define FL_CLOSE	64	/* unlock on close */
 #define FL_SLEEP	128	/* A blocking lock */
 
+/*
+ * Special return value from posix_lock_file() and vfs_lock_file() for
+ * asynchronous locking.
+ */
+#define FILE_LOCK_DEFERRED 1
+
 /*
  * The POSIX file lock owner is determined by
  * the "struct files_struct" in the thread group
-- 
cgit v1.2.3


From b648a6de00770cc325c22f43bdd4e935f6a2ee55 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri, 25 Jul 2008 01:48:57 -0700
Subject: locks: cleanup code duplication

Extract common code into a function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/locks.c | 71 +++++++++++++++++++++++++++-----------------------------------
 1 file changed, 31 insertions(+), 40 deletions(-)

diff --git a/fs/locks.c b/fs/locks.c
index 1ce57b4b362..6222e4b580e 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1738,6 +1738,35 @@ int vfs_lock_file(struct file *filp, unsigned int cmd, struct file_lock *fl, str
 }
 EXPORT_SYMBOL_GPL(vfs_lock_file);
 
+static int do_lock_file_wait(struct file *filp, unsigned int cmd,
+			     struct file_lock *fl)
+{
+	int error;
+
+	error = security_file_lock(filp, fl->fl_type);
+	if (error)
+		return error;
+
+	if (filp->f_op && filp->f_op->lock != NULL)
+		error = filp->f_op->lock(filp, cmd, fl);
+	else {
+		for (;;) {
+			error = posix_lock_file(filp, fl, NULL);
+			if (error != FILE_LOCK_DEFERRED)
+				break;
+			error = wait_event_interruptible(fl->fl_wait,
+							 !fl->fl_next);
+			if (!error)
+				continue;
+
+			locks_delete_block(fl);
+			break;
+		}
+	}
+
+	return error;
+}
+
 /* Apply the lock described by l to an open file descriptor.
  * This implements both the F_SETLK and F_SETLKW commands of fcntl().
  */
@@ -1795,26 +1824,7 @@ again:
 		goto out;
 	}
 
-	error = security_file_lock(filp, file_lock->fl_type);
-	if (error)
-		goto out;
-
-	if (filp->f_op && filp->f_op->lock != NULL)
-		error = filp->f_op->lock(filp, cmd, file_lock);
-	else {
-		for (;;) {
-			error = posix_lock_file(filp, file_lock, NULL);
-			if (error != FILE_LOCK_DEFERRED)
-				break;
-			error = wait_event_interruptible(file_lock->fl_wait,
-					!file_lock->fl_next);
-			if (!error)
-				continue;
-
-			locks_delete_block(file_lock);
-			break;
-		}
-	}
+	error = do_lock_file_wait(filp, cmd, file_lock);
 
 	/*
 	 * Attempt to detect a close/fcntl race and recover by
@@ -1932,26 +1942,7 @@ again:
 		goto out;
 	}
 
-	error = security_file_lock(filp, file_lock->fl_type);
-	if (error)
-		goto out;
-
-	if (filp->f_op && filp->f_op->lock != NULL)
-		error = filp->f_op->lock(filp, cmd, file_lock);
-	else {
-		for (;;) {
-			error = posix_lock_file(filp, file_lock, NULL);
-			if (error != FILE_LOCK_DEFERRED)
-				break;
-			error = wait_event_interruptible(file_lock->fl_wait,
-					!file_lock->fl_next);
-			if (!error)
-				continue;
-
-			locks_delete_block(file_lock);
-			break;
-		}
-	}
+	error = do_lock_file_wait(filp, cmd, file_lock);
 
 	/*
 	 * Attempt to detect a close/fcntl race and recover by
-- 
cgit v1.2.3


From 764c76b371722e0cba5c24d91225f0f954b69d44 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri, 25 Jul 2008 01:48:58 -0700
Subject: locks: allow ->lock() to return FILE_LOCK_DEFERRED

Allow filesystem's ->lock() method to call posix_lock_file() instead of
posix_lock_file_wait(), and return FILE_LOCK_DEFERRED.  This makes it
possible to implement a such a ->lock() function, that works with the lock
manager, which needs the call to be asynchronous.

Now the vfs_lock_file() helper can be used, so this is a cleanup as well.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/locks.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/fs/locks.c b/fs/locks.c
index 6222e4b580e..01490300f7c 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1747,21 +1747,16 @@ static int do_lock_file_wait(struct file *filp, unsigned int cmd,
 	if (error)
 		return error;
 
-	if (filp->f_op && filp->f_op->lock != NULL)
-		error = filp->f_op->lock(filp, cmd, fl);
-	else {
-		for (;;) {
-			error = posix_lock_file(filp, fl, NULL);
-			if (error != FILE_LOCK_DEFERRED)
-				break;
-			error = wait_event_interruptible(fl->fl_wait,
-							 !fl->fl_next);
-			if (!error)
-				continue;
-
-			locks_delete_block(fl);
+	for (;;) {
+		error = vfs_lock_file(filp, cmd, fl, NULL);
+		if (error != FILE_LOCK_DEFERRED)
 			break;
-		}
+		error = wait_event_interruptible(fl->fl_wait, !fl->fl_next);
+		if (!error)
+			continue;
+
+		locks_delete_block(fl);
+		break;
 	}
 
 	return error;
-- 
cgit v1.2.3


From 0de6256daafa3a97a269995e9b29f956bd419bbf Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri, 25 Jul 2008 01:48:59 -0700
Subject: fuse: prepare lookup for nfs export

Use d_splice_alias() instead of d_add() in fuse lookup code, to allow NFS
exporting.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fuse/dir.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 2060bf06b90..e5217b213b4 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -239,18 +239,20 @@ int fuse_valid_type(int m)
  * Add a directory inode to a dentry, ensuring that no other dentry
  * refers to this inode.  Called with fc->inst_mutex.
  */
-static int fuse_d_add_directory(struct dentry *entry, struct inode *inode)
+static struct dentry *fuse_d_add_directory(struct dentry *entry,
+					   struct inode *inode)
 {
 	struct dentry *alias = d_find_alias(inode);
-	if (alias) {
+	if (alias && !(alias->d_flags & DCACHE_DISCONNECTED)) {
 		/* This tries to shrink the subtree below alias */
 		fuse_invalidate_entry(alias);
 		dput(alias);
 		if (!list_empty(&inode->i_dentry))
-			return -EBUSY;
+			return ERR_PTR(-EBUSY);
+	} else {
+		dput(alias);
 	}
-	d_add(entry, inode);
-	return 0;
+	return d_splice_alias(inode, entry);
 }
 
 static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
@@ -259,6 +261,7 @@ static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
 	int err;
 	struct fuse_entry_out outarg;
 	struct inode *inode = NULL;
+	struct dentry *newent;
 	struct fuse_conn *fc = get_fuse_conn(dir);
 	struct fuse_req *req;
 	struct fuse_req *forget_req;
@@ -303,21 +306,22 @@ static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
 
 	if (inode && S_ISDIR(inode->i_mode)) {
 		mutex_lock(&fc->inst_mutex);
-		err = fuse_d_add_directory(entry, inode);
+		newent = fuse_d_add_directory(entry, inode);
 		mutex_unlock(&fc->inst_mutex);
-		if (err) {
+		if (IS_ERR(newent)) {
 			iput(inode);
-			return ERR_PTR(err);
+			return newent;
 		}
 	} else
-		d_add(entry, inode);
+		newent = d_splice_alias(inode, entry);
 
+	entry = newent ? newent : entry;
 	entry->d_op = &fuse_dentry_operations;
 	if (!err)
 		fuse_change_entry_timeout(entry, &outarg);
 	else
 		fuse_invalidate_entry_cache(entry);
-	return NULL;
+	return newent;
 }
 
 /*
-- 
cgit v1.2.3


From dbd561d236ff16f8143bc727d91758ddd190e8cb Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri, 25 Jul 2008 01:49:00 -0700
Subject: fuse: add export operations

Implement export_operations, to allow fuse filesystems to be exported to
NFS.  This feature has been in the out-of-tree fuse module, and is widely
used and tested.

It has not been originally merged into mainline, because doing the NFS
export in userspace was thought to be a cleaner and more efficient way of
doing it, than through the kernel.

While that is true, it would also have involved a lot of duplicated effort
at reimplementing NFS exporting (all the different versions of the
protocol).  This effort was unfortunately not undertaken by anyone, so we
are left with doing it the easy but less efficient way.

If this feature goes in, the out-of-tree fuse module can go away,
which would have several advantages:

  - not having to maintain two versions
  - less confusion for users
  - no bugs due to kernel API changes

Comment from hch:
 - Use the same fh_type values as XFS, since we use the same fh encoding.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fuse/dir.c    |   4 +-
 fs/fuse/fuse_i.h |   4 ++
 fs/fuse/inode.c  | 115 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 121 insertions(+), 2 deletions(-)

diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index e5217b213b4..be5450dd638 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -97,7 +97,7 @@ void fuse_invalidate_attr(struct inode *inode)
  * timeout is unknown (unlink, rmdir, rename and in some cases
  * lookup)
  */
-static void fuse_invalidate_entry_cache(struct dentry *entry)
+void fuse_invalidate_entry_cache(struct dentry *entry)
 {
 	fuse_dentry_settime(entry, 0);
 }
@@ -225,7 +225,7 @@ static int invalid_nodeid(u64 nodeid)
 	return !nodeid || nodeid == FUSE_ROOT_ID;
 }
 
-static struct dentry_operations fuse_dentry_operations = {
+struct dentry_operations fuse_dentry_operations = {
 	.d_revalidate	= fuse_dentry_revalidate,
 };
 
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index bae948657c4..5d3146da64e 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -464,6 +464,8 @@ static inline u64 get_node_id(struct inode *inode)
 /** Device operations */
 extern const struct file_operations fuse_dev_operations;
 
+extern struct dentry_operations fuse_dentry_operations;
+
 /**
  * Get a filled in inode
  */
@@ -604,6 +606,8 @@ void fuse_abort_conn(struct fuse_conn *fc);
  */
 void fuse_invalidate_attr(struct inode *inode);
 
+void fuse_invalidate_entry_cache(struct dentry *entry);
+
 /**
  * Acquire reference to fuse_conn
  */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 3141690558c..71fa76a48a3 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -18,6 +18,7 @@
 #include <linux/statfs.h>
 #include <linux/random.h>
 #include <linux/sched.h>
+#include <linux/exportfs.h>
 
 MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
 MODULE_DESCRIPTION("Filesystem in Userspace");
@@ -552,6 +553,119 @@ static struct inode *get_root_inode(struct super_block *sb, unsigned mode)
 	return fuse_iget(sb, 1, 0, &attr, 0, 0);
 }
 
+struct fuse_inode_handle
+{
+	u64 nodeid;
+	u32 generation;
+};
+
+static struct dentry *fuse_get_dentry(struct super_block *sb,
+				      struct fuse_inode_handle *handle)
+{
+	struct inode *inode;
+	struct dentry *entry;
+	int err = -ESTALE;
+
+	if (handle->nodeid == 0)
+		goto out_err;
+
+	inode = ilookup5(sb, handle->nodeid, fuse_inode_eq, &handle->nodeid);
+	if (!inode)
+		goto out_err;
+	err = -ESTALE;
+	if (inode->i_generation != handle->generation)
+		goto out_iput;
+
+	entry = d_alloc_anon(inode);
+	err = -ENOMEM;
+	if (!entry)
+		goto out_iput;
+
+	if (get_node_id(inode) != FUSE_ROOT_ID) {
+		entry->d_op = &fuse_dentry_operations;
+		fuse_invalidate_entry_cache(entry);
+	}
+
+	return entry;
+
+ out_iput:
+	iput(inode);
+ out_err:
+	return ERR_PTR(err);
+}
+
+static int fuse_encode_fh(struct dentry *dentry, u32 *fh, int *max_len,
+			   int connectable)
+{
+	struct inode *inode = dentry->d_inode;
+	bool encode_parent = connectable && !S_ISDIR(inode->i_mode);
+	int len = encode_parent ? 6 : 3;
+	u64 nodeid;
+	u32 generation;
+
+	if (*max_len < len)
+		return  255;
+
+	nodeid = get_fuse_inode(inode)->nodeid;
+	generation = inode->i_generation;
+
+	fh[0] = (u32)(nodeid >> 32);
+	fh[1] = (u32)(nodeid & 0xffffffff);
+	fh[2] = generation;
+
+	if (encode_parent) {
+		struct inode *parent;
+
+		spin_lock(&dentry->d_lock);
+		parent = dentry->d_parent->d_inode;
+		nodeid = get_fuse_inode(parent)->nodeid;
+		generation = parent->i_generation;
+		spin_unlock(&dentry->d_lock);
+
+		fh[3] = (u32)(nodeid >> 32);
+		fh[4] = (u32)(nodeid & 0xffffffff);
+		fh[5] = generation;
+	}
+
+	*max_len = len;
+	return encode_parent ? 0x82 : 0x81;
+}
+
+static struct dentry *fuse_fh_to_dentry(struct super_block *sb,
+		struct fid *fid, int fh_len, int fh_type)
+{
+	struct fuse_inode_handle handle;
+
+	if ((fh_type != 0x81 && fh_type != 0x82) || fh_len < 3)
+		return NULL;
+
+	handle.nodeid = (u64) fid->raw[0] << 32;
+	handle.nodeid |= (u64) fid->raw[1];
+	handle.generation = fid->raw[2];
+	return fuse_get_dentry(sb, &handle);
+}
+
+static struct dentry *fuse_fh_to_parent(struct super_block *sb,
+		struct fid *fid, int fh_len, int fh_type)
+{
+	struct fuse_inode_handle parent;
+
+	if (fh_type != 0x82 || fh_len < 6)
+		return NULL;
+
+	parent.nodeid = (u64) fid->raw[3] << 32;
+	parent.nodeid |= (u64) fid->raw[4];
+	parent.generation = fid->raw[5];
+	return fuse_get_dentry(sb, &parent);
+}
+
+
+static const struct export_operations fuse_export_operations = {
+	.fh_to_dentry	= fuse_fh_to_dentry,
+	.fh_to_parent	= fuse_fh_to_parent,
+	.encode_fh	= fuse_encode_fh,
+};
+
 static const struct super_operations fuse_super_operations = {
 	.alloc_inode    = fuse_alloc_inode,
 	.destroy_inode  = fuse_destroy_inode,
@@ -652,6 +766,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 	sb->s_magic = FUSE_SUPER_MAGIC;
 	sb->s_op = &fuse_super_operations;
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
+	sb->s_export_op = &fuse_export_operations;
 
 	file = fget(d.fd);
 	if (!file)
-- 
cgit v1.2.3


From c180eebe1390c2076ead6a9bc95a02efb994edb7 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri, 25 Jul 2008 01:49:01 -0700
Subject: fuse: add fuse_lookup_name() helper

Add a new helper function which sends a LOOKUP request with the supplied
name.  This will be used by the next patch to send special LOOKUP requests
with "." and ".." as the name.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fuse/dir.c | 117 ++++++++++++++++++++++++++++++++++++++--------------------
 1 file changed, 77 insertions(+), 40 deletions(-)

diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index be5450dd638..51d0035ff07 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -112,18 +112,16 @@ static void fuse_invalidate_entry(struct dentry *entry)
 	fuse_invalidate_entry_cache(entry);
 }
 
-static void fuse_lookup_init(struct fuse_req *req, struct inode *dir,
-			     struct dentry *entry,
+static void fuse_lookup_init(struct fuse_conn *fc, struct fuse_req *req,
+			     u64 nodeid, struct qstr *name,
 			     struct fuse_entry_out *outarg)
 {
-	struct fuse_conn *fc = get_fuse_conn(dir);
-
 	memset(outarg, 0, sizeof(struct fuse_entry_out));
 	req->in.h.opcode = FUSE_LOOKUP;
-	req->in.h.nodeid = get_node_id(dir);
+	req->in.h.nodeid = nodeid;
 	req->in.numargs = 1;
-	req->in.args[0].size = entry->d_name.len + 1;
-	req->in.args[0].value = entry->d_name.name;
+	req->in.args[0].size = name->len + 1;
+	req->in.args[0].value = name->name;
 	req->out.numargs = 1;
 	if (fc->minor < 9)
 		req->out.args[0].size = FUSE_COMPAT_ENTRY_OUT_SIZE;
@@ -189,7 +187,8 @@ static int fuse_dentry_revalidate(struct dentry *entry, struct nameidata *nd)
 		attr_version = fuse_get_attr_version(fc);
 
 		parent = dget_parent(entry);
-		fuse_lookup_init(req, parent->d_inode, entry, &outarg);
+		fuse_lookup_init(fc, req, get_node_id(parent->d_inode),
+				 &entry->d_name, &outarg);
 		request_send(fc, req);
 		dput(parent);
 		err = req->out.h.error;
@@ -255,73 +254,111 @@ static struct dentry *fuse_d_add_directory(struct dentry *entry,
 	return d_splice_alias(inode, entry);
 }
 
-static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
-				  struct nameidata *nd)
+int fuse_lookup_name(struct super_block *sb, u64 nodeid, struct qstr *name,
+		     struct fuse_entry_out *outarg, struct inode **inode)
 {
-	int err;
-	struct fuse_entry_out outarg;
-	struct inode *inode = NULL;
-	struct dentry *newent;
-	struct fuse_conn *fc = get_fuse_conn(dir);
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
 	struct fuse_req *req;
 	struct fuse_req *forget_req;
 	u64 attr_version;
+	int err;
 
-	if (entry->d_name.len > FUSE_NAME_MAX)
-		return ERR_PTR(-ENAMETOOLONG);
+	*inode = NULL;
+	err = -ENAMETOOLONG;
+	if (name->len > FUSE_NAME_MAX)
+		goto out;
 
 	req = fuse_get_req(fc);
+	err = PTR_ERR(req);
 	if (IS_ERR(req))
-		return ERR_CAST(req);
+		goto out;
 
 	forget_req = fuse_get_req(fc);
+	err = PTR_ERR(forget_req);
 	if (IS_ERR(forget_req)) {
 		fuse_put_request(fc, req);
-		return ERR_CAST(forget_req);
+		goto out;
 	}
 
 	attr_version = fuse_get_attr_version(fc);
 
-	fuse_lookup_init(req, dir, entry, &outarg);
+	fuse_lookup_init(fc, req, nodeid, name, outarg);
 	request_send(fc, req);
 	err = req->out.h.error;
 	fuse_put_request(fc, req);
 	/* Zero nodeid is same as -ENOENT, but with valid timeout */
-	if (!err && outarg.nodeid &&
-	    (invalid_nodeid(outarg.nodeid) ||
-	     !fuse_valid_type(outarg.attr.mode)))
-		err = -EIO;
-	if (!err && outarg.nodeid) {
-		inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
-				  &outarg.attr, entry_attr_timeout(&outarg),
-				  attr_version);
-		if (!inode) {
-			fuse_send_forget(fc, forget_req, outarg.nodeid, 1);
-			return ERR_PTR(-ENOMEM);
-		}
+	if (err || !outarg->nodeid)
+		goto out_put_forget;
+
+	err = -EIO;
+	if (!outarg->nodeid)
+		goto out_put_forget;
+	if (!fuse_valid_type(outarg->attr.mode))
+		goto out_put_forget;
+
+	*inode = fuse_iget(sb, outarg->nodeid, outarg->generation,
+			   &outarg->attr, entry_attr_timeout(outarg),
+			   attr_version);
+	err = -ENOMEM;
+	if (!*inode) {
+		fuse_send_forget(fc, forget_req, outarg->nodeid, 1);
+		goto out;
 	}
+	err = 0;
+
+ out_put_forget:
 	fuse_put_request(fc, forget_req);
-	if (err && err != -ENOENT)
-		return ERR_PTR(err);
+ out:
+	return err;
+}
+
+static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
+				  struct nameidata *nd)
+{
+	int err;
+	struct fuse_entry_out outarg;
+	struct inode *inode;
+	struct dentry *newent;
+	struct fuse_conn *fc = get_fuse_conn(dir);
+	bool outarg_valid = true;
+
+	err = fuse_lookup_name(dir->i_sb, get_node_id(dir), &entry->d_name,
+			       &outarg, &inode);
+	if (err == -ENOENT) {
+		outarg_valid = false;
+		err = 0;
+	}
+	if (err)
+		goto out_err;
+
+	err = -EIO;
+	if (inode && get_node_id(inode) == FUSE_ROOT_ID)
+		goto out_iput;
 
 	if (inode && S_ISDIR(inode->i_mode)) {
 		mutex_lock(&fc->inst_mutex);
 		newent = fuse_d_add_directory(entry, inode);
 		mutex_unlock(&fc->inst_mutex);
-		if (IS_ERR(newent)) {
-			iput(inode);
-			return newent;
-		}
-	} else
+		err = PTR_ERR(newent);
+		if (IS_ERR(newent))
+			goto out_iput;
+	} else {
 		newent = d_splice_alias(inode, entry);
+	}
 
 	entry = newent ? newent : entry;
 	entry->d_op = &fuse_dentry_operations;
-	if (!err)
+	if (outarg_valid)
 		fuse_change_entry_timeout(entry, &outarg);
 	else
 		fuse_invalidate_entry_cache(entry);
+
 	return newent;
+
+ out_iput:
+	iput(inode);
+ out_err:
+	return ERR_PTR(err);
 }
 
 /*
-- 
cgit v1.2.3


From 33670fa296860283f04a7975b8c790f101e43a6e Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri, 25 Jul 2008 01:49:02 -0700
Subject: fuse: nfs export special lookups

Implement the get_parent export operation by sending a LOOKUP request with
".." as the name.

Implement looking up an inode by node ID after it has been evicted from
the cache.  This is done by seding a LOOKUP request with "." as the name
(for all file types, not just directories).

The filesystem can set the FUSE_EXPORT_SUPPORT flag in the INIT reply, to
indicate that it supports these special lookups.

Thanks to John Muir for the original implementation of this feature.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fuse/fuse_i.h     |  6 +++++
 fs/fuse/inode.c      | 66 +++++++++++++++++++++++++++++++++++++++++++++++++---
 include/linux/fuse.h |  3 +++
 3 files changed, 72 insertions(+), 3 deletions(-)

diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 5d3146da64e..3a876076bdd 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -363,6 +363,9 @@ struct fuse_conn {
 	/** Do not send separate SETATTR request before open(O_TRUNC)  */
 	unsigned atomic_o_trunc : 1;
 
+	/** Filesystem supports NFS exporting.  Only set in INIT */
+	unsigned export_support : 1;
+
 	/*
 	 * The following bitfields are only for optimization purposes
 	 * and hence races in setting them will not cause malfunction
@@ -473,6 +476,9 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
 			int generation, struct fuse_attr *attr,
 			u64 attr_valid, u64 attr_version);
 
+int fuse_lookup_name(struct super_block *sb, u64 nodeid, struct qstr *name,
+		     struct fuse_entry_out *outarg, struct inode **inode);
+
 /**
  * Send FORGET command
  */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 71fa76a48a3..7d2f7d6e22e 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -562,6 +562,7 @@ struct fuse_inode_handle
 static struct dentry *fuse_get_dentry(struct super_block *sb,
 				      struct fuse_inode_handle *handle)
 {
+	struct fuse_conn *fc = get_fuse_conn_super(sb);
 	struct inode *inode;
 	struct dentry *entry;
 	int err = -ESTALE;
@@ -570,8 +571,27 @@ static struct dentry *fuse_get_dentry(struct super_block *sb,
 		goto out_err;
 
 	inode = ilookup5(sb, handle->nodeid, fuse_inode_eq, &handle->nodeid);
-	if (!inode)
-		goto out_err;
+	if (!inode) {
+		struct fuse_entry_out outarg;
+		struct qstr name;
+
+		if (!fc->export_support)
+			goto out_err;
+
+		name.len = 1;
+		name.name = ".";
+		err = fuse_lookup_name(sb, handle->nodeid, &name, &outarg,
+				       &inode);
+		if (err && err != -ENOENT)
+			goto out_err;
+		if (err || !inode) {
+			err = -ESTALE;
+			goto out_err;
+		}
+		err = -EIO;
+		if (get_node_id(inode) != handle->nodeid)
+			goto out_iput;
+	}
 	err = -ESTALE;
 	if (inode->i_generation != handle->generation)
 		goto out_iput;
@@ -659,11 +679,46 @@ static struct dentry *fuse_fh_to_parent(struct super_block *sb,
 	return fuse_get_dentry(sb, &parent);
 }
 
+static struct dentry *fuse_get_parent(struct dentry *child)
+{
+	struct inode *child_inode = child->d_inode;
+	struct fuse_conn *fc = get_fuse_conn(child_inode);
+	struct inode *inode;
+	struct dentry *parent;
+	struct fuse_entry_out outarg;
+	struct qstr name;
+	int err;
+
+	if (!fc->export_support)
+		return ERR_PTR(-ESTALE);
+
+	name.len = 2;
+	name.name = "..";
+	err = fuse_lookup_name(child_inode->i_sb, get_node_id(child_inode),
+			       &name, &outarg, &inode);
+	if (err && err != -ENOENT)
+		return ERR_PTR(err);
+	if (err || !inode)
+		return ERR_PTR(-ESTALE);
+
+	parent = d_alloc_anon(inode);
+	if (!parent) {
+		iput(inode);
+		return ERR_PTR(-ENOMEM);
+	}
+	if (get_node_id(inode) != FUSE_ROOT_ID) {
+		parent->d_op = &fuse_dentry_operations;
+		fuse_invalidate_entry_cache(parent);
+	}
+
+	return parent;
+}
 
 static const struct export_operations fuse_export_operations = {
 	.fh_to_dentry	= fuse_fh_to_dentry,
 	.fh_to_parent	= fuse_fh_to_parent,
 	.encode_fh	= fuse_encode_fh,
+	.get_parent	= fuse_get_parent,
 };
 
 static const struct super_operations fuse_super_operations = {
@@ -695,6 +750,11 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
 				fc->no_lock = 1;
 			if (arg->flags & FUSE_ATOMIC_O_TRUNC)
 				fc->atomic_o_trunc = 1;
+			if (arg->minor >= 9) {
+				/* LOOKUP has dependency on proto version */
+				if (arg->flags & FUSE_EXPORT_SUPPORT)
+					fc->export_support = 1;
+			}
 			if (arg->flags & FUSE_BIG_WRITES)
 				fc->big_writes = 1;
 		} else {
@@ -721,7 +781,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req)
 	arg->minor = FUSE_KERNEL_MINOR_VERSION;
 	arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
 	arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC |
-		FUSE_BIG_WRITES;
+		FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES;
 	req->in.h.opcode = FUSE_INIT;
 	req->in.numargs = 1;
 	req->in.args[0].size = sizeof(*arg);
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index d4828219769..265635dc990 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -104,11 +104,14 @@ struct fuse_file_lock {
 
 /**
  * INIT request/reply flags
+ *
+ * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
  */
 #define FUSE_ASYNC_READ		(1 << 0)
 #define FUSE_POSIX_LOCKS	(1 << 1)
 #define FUSE_FILE_OPS		(1 << 2)
 #define FUSE_ATOMIC_O_TRUNC	(1 << 3)
+#define FUSE_EXPORT_SUPPORT	(1 << 4)
 #define FUSE_BIG_WRITES		(1 << 5)
 
 /**
-- 
cgit v1.2.3


From 48e90761b570ff57f58b726229d229729949c5bb Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Fri, 25 Jul 2008 01:49:02 -0700
Subject: fuse: lockd support

If fuse filesystem doesn't define it's own lock operations, then allow the
lock manager to work with fuse.

Adding lockd support for remote locking is also possible, but more rarely
used, so leave it till later.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fuse/file.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 8092f0d9fd1..67ff2c6a8f6 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1341,6 +1341,11 @@ static int fuse_setlk(struct file *file, struct file_lock *fl, int flock)
 	pid_t pid = fl->fl_type != F_UNLCK ? current->tgid : 0;
 	int err;
 
+	if (fl->fl_lmops && fl->fl_lmops->fl_grant) {
+		/* NLM needs asynchronous locks, which we don't support yet */
+		return -ENOLCK;
+	}
+
 	/* Unlock on close is handled by the flush method */
 	if (fl->fl_flags & FL_CLOSE)
 		return 0;
@@ -1365,7 +1370,9 @@ static int fuse_file_lock(struct file *file, int cmd, struct file_lock *fl)
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	int err;
 
-	if (cmd == F_GETLK) {
+	if (cmd == F_CANCELLK) {
+		err = 0;
+	} else if (cmd == F_GETLK) {
 		if (fc->no_lock) {
 			posix_test_lock(file, fl);
 			err = 0;
@@ -1373,7 +1380,7 @@ static int fuse_file_lock(struct file *file, int cmd, struct file_lock *fl)
 			err = fuse_getlk(file, fl);
 	} else {
 		if (fc->no_lock)
-			err = posix_lock_file_wait(file, fl);
+			err = posix_lock_file(file, fl, NULL);
 		else
 			err = fuse_setlk(file, fl, 0);
 	}
-- 
cgit v1.2.3


From 8f421c595a9145959d8aab09172743132abdffdb Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:04 -0700
Subject: edac: i5100 new intel chipset driver

Preliminary support for the Intel 5100 MCH.  CE and UE errors are reported
along with the current DIMM label information and other memory parameters.

Reasons why this is preliminary:

1) This chip has 2 independent memory controllers which, for best
   perforance, use interleaved accesses to the DDR2 memory.  This
   architecture does not map very well to the current edac data structures
   which depend on symmetric channel access to the interleaved data.
   Without core changes, the best I could do for now is to map both memory
   controllers to different csrows (first all ranks of controller 0, then
   all ranks of controller 1).  Someone much more familiar with the edac
   core than I will probably need to come up with a more general data
   structure to handle the interleaving and de-interleaving of the two
   memory controllers.

2) I have not yet tackled the de-interleaving of the rank/controller
   address space into the physical address space of the CPU.  There is
   nothing fundamentally missing, it is just ending up to be a lot of
   code, and I'd rather keep it separate for now, esp since it doesn't
   work yet...

3) The code depends on a particular i5100 chip select to DIMM mainboard
   chip select mapping.  This mapping seems obvious to me in order to
   support dual and single ranked memory, but it is not unique and DIMM
   labels could be wrong on other mainboards.  There is no way to query
   this mapping that I know of.

4) The code requires that the i5100 is in 32GB mode.  Only 4 ranks per
   controller, 2 ranks per DIMM are supported.  I do not have hardware
   (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks
   per controller) mode.

5) The serial presence detect code should be broken out into a "real"
   i2c driver so that decode-dimms.pl can work.

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/Kconfig      |   7 +
 drivers/edac/Makefile     |   1 +
 drivers/edac/i5100_edac.c | 827 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/pci_ids.h   |   3 +
 4 files changed, 838 insertions(+)
 create mode 100644 drivers/edac/i5100_edac.c

diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 6e6c3c4aea6..5a11e3cbcae 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -123,6 +123,13 @@ config EDAC_I5000
 	  Support for error detection and correction the Intel
 	  Greekcreek/Blackford chipsets.
 
+config EDAC_I5100
+	tristate "Intel San Clemente MCH"
+	depends on EDAC_MM_EDAC && X86 && PCI
+	help
+	  Support for error detection and correction the Intel
+	  San Clemente MCH.
+
 config EDAC_MPC85XX
 	tristate "Freescale MPC85xx"
 	depends on EDAC_MM_EDAC && FSL_SOC && MPC85xx
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 83807731d4a..e5e9104b552 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -19,6 +19,7 @@ endif
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
+obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
 obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
new file mode 100644
index 00000000000..43430bf7018
--- /dev/null
+++ b/drivers/edac/i5100_edac.c
@@ -0,0 +1,827 @@
+/*
+ * Intel 5100 Memory Controllers kernel module
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * This module is based on the following document:
+ *
+ * Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet
+ *      http://download.intel.com/design/chipsets/datashts/318378.pdf
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/delay.h>
+#include <linux/mmzone.h>
+
+#include "edac_core.h"
+
+/* register addresses and bit field accessors... */
+
+/* device 16, func 1 */
+#define I5100_MS		0x44	/* Memory Status Register */
+#define I5100_SPDDATA		0x48	/* Serial Presence Detect Status Reg */
+#define		I5100_SPDDATA_RDO(a)	((a) >> 15 & 1)
+#define		I5100_SPDDATA_SBE(a)	((a) >> 13 & 1)
+#define		I5100_SPDDATA_BUSY(a)	((a) >> 12 & 1)
+#define		I5100_SPDDATA_DATA(a)	((a)       & ((1 << 8) - 1))
+#define I5100_SPDCMD		0x4c	/* Serial Presence Detect Command Reg */
+#define		I5100_SPDCMD_DTI(a)	(((a) & ((1 << 4) - 1)) << 28)
+#define		I5100_SPDCMD_CKOVRD(a)	(((a) & 1)              << 27)
+#define		I5100_SPDCMD_SA(a)	(((a) & ((1 << 3) - 1)) << 24)
+#define		I5100_SPDCMD_BA(a)	(((a) & ((1 << 8) - 1)) << 16)
+#define		I5100_SPDCMD_DATA(a)	(((a) & ((1 << 8) - 1)) <<  8)
+#define		I5100_SPDCMD_CMD(a)	((a) & 1)
+#define I5100_TOLM		0x6c	/* Top of Low Memory */
+#define		I5100_TOLM_TOLM(a)	((a) >> 12 & ((1 << 4) - 1))
+#define I5100_MIR0		0x80	/* Memory Interleave Range 0 */
+#define I5100_MIR1		0x84	/* Memory Interleave Range 1 */
+#define I5100_AMIR_0		0x8c	/* Adjusted Memory Interleave Range 0 */
+#define I5100_AMIR_1		0x90	/* Adjusted Memory Interleave Range 1 */
+#define		I5100_MIR_LIMIT(a)	((a) >> 4 & ((1 << 12) - 1))
+#define		I5100_MIR_WAY1(a)	((a) >> 1 & 1)
+#define		I5100_MIR_WAY0(a)	((a)      & 1)
+#define I5100_FERR_NF_MEM	0xa0	/* MC First Non Fatal Errors */
+#define		I5100_FERR_NF_MEM_CHAN_INDX(a)	((a) >> 28 & 1)
+#define		I5100_FERR_NF_MEM_SPD_MASK	(1 << 18)
+#define		I5100_FERR_NF_MEM_M16ERR_MASK	(1 << 16)
+#define		I5100_FERR_NF_MEM_M15ERR_MASK	(1 << 15)
+#define		I5100_FERR_NF_MEM_M14ERR_MASK	(1 << 14)
+#define		I5100_FERR_NF_MEM_
+#define		I5100_FERR_NF_MEM_
+#define		I5100_FERR_NF_MEM_ANY_MASK	\
+			(I5100_FERR_NF_MEM_M16ERR_MASK | \
+			I5100_FERR_NF_MEM_M15ERR_MASK | \
+			I5100_FERR_NF_MEM_M14ERR_MASK)
+#define		I5100_FERR_NF_MEM_ANY(a)  ((a) & I5100_FERR_NF_MEM_ANY_MASK)
+#define	I5100_NERR_NF_MEM	0xa4	/* MC Next Non-Fatal Errors */
+#define		I5100_NERR_NF_MEM_ANY(a)  I5100_FERR_NF_MEM_ANY(a)
+
+/* device 21 and 22, func 0 */
+#define I5100_MTR_0	0x154	/* Memory Technology Registers 0-3 */
+#define I5100_DMIR	0x15c	/* DIMM Interleave Range */
+#define		I5100_DMIR_LIMIT(a)	((a) >> 16 & ((1 << 11) - 1))
+#define		I5100_DMIR_RANK(a, i)	((a) >> (4 * i) & ((1 <<  2) - 1))
+#define I5100_MTR_4	0x1b0	/* Memory Technology Registers 4,5 */
+#define		I5100_MTR_PRESENT(a)	((a) >> 10 & 1)
+#define		I5100_MTR_ETHROTTLE(a)	((a) >>  9 & 1)
+#define		I5100_MTR_WIDTH(a)	((a) >>  8 & 1)
+#define		I5100_MTR_NUMBANK(a)	((a) >>  6 & 1)
+#define		I5100_MTR_NUMROW(a)	((a) >>  2 & ((1 << 2) - 1))
+#define		I5100_MTR_NUMCOL(a)	((a)       & ((1 << 2) - 1))
+#define	I5100_VALIDLOG	0x18c	/* Valid Log Markers */
+#define		I5100_VALIDLOG_REDMEMVALID(a)	((a) >> 2 & 1)
+#define		I5100_VALIDLOG_RECMEMVALID(a)	((a) >> 1 & 1)
+#define		I5100_VALIDLOG_NRECMEMVALID(a)	((a)      & 1)
+#define	I5100_NRECMEMA	0x190	/* Non-Recoverable Memory Error Log Reg A */
+#define		I5100_NRECMEMA_MERR(a)		((a) >> 15 & ((1 << 5) - 1))
+#define		I5100_NRECMEMA_BANK(a)		((a) >> 12 & ((1 << 3) - 1))
+#define		I5100_NRECMEMA_RANK(a)		((a) >>  8 & ((1 << 3) - 1))
+#define		I5100_NRECMEMA_DM_BUF_ID(a)	((a)       & ((1 << 8) - 1))
+#define	I5100_NRECMEMB	0x194	/* Non-Recoverable Memory Error Log Reg B */
+#define		I5100_NRECMEMB_CAS(a)		((a) >> 16 & ((1 << 13) - 1))
+#define		I5100_NRECMEMB_RAS(a)		((a)       & ((1 << 16) - 1))
+#define	I5100_REDMEMA	0x198	/* Recoverable Memory Data Error Log Reg A */
+#define		I5100_REDMEMA_SYNDROME(a)	(a)
+#define	I5100_REDMEMB	0x19c	/* Recoverable Memory Data Error Log Reg B */
+#define		I5100_REDMEMB_ECC_LOCATOR(a)	((a) & ((1 << 18) - 1))
+#define	I5100_RECMEMA	0x1a0	/* Recoverable Memory Error Log Reg A */
+#define		I5100_RECMEMA_MERR(a)		I5100_NRECMEMA_MERR(a)
+#define		I5100_RECMEMA_BANK(a)		I5100_NRECMEMA_BANK(a)
+#define		I5100_RECMEMA_RANK(a)		I5100_NRECMEMA_RANK(a)
+#define		I5100_RECMEMA_DM_BUF_ID(a)	I5100_NRECMEMA_DM_BUF_ID(a)
+#define	I5100_RECMEMB	0x1a4	/* Recoverable Memory Error Log Reg B */
+#define		I5100_RECMEMB_CAS(a)		I5100_NRECMEMB_CAS(a)
+#define		I5100_RECMEMB_RAS(a)		I5100_NRECMEMB_RAS(a)
+
+/* some generic limits */
+#define I5100_MAX_RANKS_PER_CTLR	6
+#define I5100_MAX_CTLRS			2
+#define I5100_MAX_RANKS_PER_DIMM	4
+#define I5100_DIMM_ADDR_LINES		(6 - 3)	/* 64 bits / 8 bits per byte */
+#define I5100_MAX_DIMM_SLOTS_PER_CTLR	4
+#define I5100_MAX_RANK_INTERLEAVE	4
+#define I5100_MAX_DMIRS			5
+
+struct i5100_priv {
+	/* ranks on each dimm -- 0 maps to not present -- obtained via SPD */
+	int dimm_numrank[I5100_MAX_CTLRS][I5100_MAX_DIMM_SLOTS_PER_CTLR];
+
+	/*
+	 * mainboard chip select map -- maps i5100 chip selects to
+	 * DIMM slot chip selects.  In the case of only 4 ranks per
+	 * controller, the mapping is fairly obvious but not unique.
+	 * we map -1 -> NC and assume both controllers use the same
+	 * map...
+	 *
+	 */
+	int dimm_csmap[I5100_MAX_DIMM_SLOTS_PER_CTLR][I5100_MAX_RANKS_PER_DIMM];
+
+	/* memory interleave range */
+	struct {
+		u64	 limit;
+		unsigned way[2];
+	} mir[I5100_MAX_CTLRS];
+
+	/* adjusted memory interleave range register */
+	unsigned amir[I5100_MAX_CTLRS];
+
+	/* dimm interleave range */
+	struct {
+		unsigned rank[I5100_MAX_RANK_INTERLEAVE];
+		u64	 limit;
+	} dmir[I5100_MAX_CTLRS][I5100_MAX_DMIRS];
+
+	/* memory technology registers... */
+	struct {
+		unsigned present;	/* 0 or 1 */
+		unsigned ethrottle;	/* 0 or 1 */
+		unsigned width;		/* 4 or 8 bits  */
+		unsigned numbank;	/* 2 or 3 lines */
+		unsigned numrow;	/* 13 .. 16 lines */
+		unsigned numcol;	/* 11 .. 12 lines */
+	} mtr[I5100_MAX_CTLRS][I5100_MAX_RANKS_PER_CTLR];
+
+	u64 tolm;		/* top of low memory in bytes */
+	unsigned ranksperctlr;	/* number of ranks per controller */
+
+	struct pci_dev *mc;	/* device 16 func 1 */
+	struct pci_dev *ch0mm;	/* device 21 func 0 */
+	struct pci_dev *ch1mm;	/* device 22 func 0 */
+};
+
+/* map a rank/ctlr to a slot number on the mainboard */
+static int i5100_rank_to_slot(const struct mem_ctl_info *mci,
+			      int ctlr, int rank)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CTLR; i++) {
+		int j;
+		const int numrank = priv->dimm_numrank[ctlr][i];
+
+		for (j = 0; j < numrank; j++)
+			if (priv->dimm_csmap[i][j] == rank)
+				return i * 2 + ctlr;
+	}
+
+	return -1;
+}
+
+/*
+ * The processor bus memory addresses are broken into three
+ * pieces, whereas the controller addresses are contiguous.
+ *
+ * here we map from the controller address space to the
+ * processor address space:
+ *
+ *    Processor Address Space
+ * +-----------------------------+
+ * |                             |
+ * |  "high" memory addresses    |
+ * |                             |
+ * +-----------------------------+ <- 4GB on the i5100
+ * |                             |
+ * |  other non-memory addresses |
+ * |                             |
+ * +-----------------------------+ <- top of low memory
+ * |                             |
+ * | "low" memory addresses      |
+ * |                             |
+ * +-----------------------------+
+ */
+static unsigned long i5100_ctl_page_to_phys(struct mem_ctl_info *mci,
+					    unsigned long cntlr_addr)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	if (cntlr_addr < priv->tolm)
+		return cntlr_addr;
+
+	return (1ULL << 32) + (cntlr_addr - priv->tolm);
+}
+
+static const char *i5100_err_msg(unsigned err)
+{
+	const char *merrs[] = {
+		"unknown", /* 0 */
+		"uncorrectable data ECC on replay", /* 1 */
+		"unknown", /* 2 */
+		"unknown", /* 3 */
+		"aliased uncorrectable demand data ECC", /* 4 */
+		"aliased uncorrectable spare-copy data ECC", /* 5 */
+		"aliased uncorrectable patrol data ECC", /* 6 */
+		"unknown", /* 7 */
+		"unknown", /* 8 */
+		"unknown", /* 9 */
+		"non-aliased uncorrectable demand data ECC", /* 10 */
+		"non-aliased uncorrectable spare-copy data ECC", /* 11 */
+		"non-aliased uncorrectable patrol data ECC", /* 12 */
+		"unknown", /* 13 */
+		"correctable demand data ECC", /* 14 */
+		"correctable spare-copy data ECC", /* 15 */
+		"correctable patrol data ECC", /* 16 */
+		"unknown", /* 17 */
+		"SPD protocol error", /* 18 */
+		"unknown", /* 19 */
+		"spare copy initiated", /* 20 */
+		"spare copy completed", /* 21 */
+	};
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(merrs); i++)
+		if (1 << i & err)
+			return merrs[i];
+
+	return "none";
+}
+
+/* convert csrow index into a rank (per controller -- 0..5) */
+static int i5100_csrow_to_rank(const struct mem_ctl_info *mci, int csrow)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return csrow % priv->ranksperctlr;
+}
+
+/* convert csrow index into a controller (0..1) */
+static int i5100_csrow_to_cntlr(const struct mem_ctl_info *mci, int csrow)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return csrow / priv->ranksperctlr;
+}
+
+static unsigned i5100_rank_to_csrow(const struct mem_ctl_info *mci,
+				    int ctlr, int rank)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return ctlr * priv->ranksperctlr + rank;
+}
+
+static void i5100_handle_ce(struct mem_ctl_info *mci,
+			    int ctlr,
+			    unsigned bank,
+			    unsigned rank,
+			    unsigned long syndrome,
+			    unsigned cas,
+			    unsigned ras,
+			    const char *msg)
+{
+	const int csrow = i5100_rank_to_csrow(mci, ctlr, rank);
+
+	printk(KERN_ERR
+		"CE ctlr %d, bank %u, rank %u, syndrome 0x%lx, "
+		"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
+		ctlr, bank, rank, syndrome, cas, ras,
+		csrow, mci->csrows[csrow].channels[0].label, msg);
+
+	mci->ce_count++;
+	mci->csrows[csrow].ce_count++;
+	mci->csrows[csrow].channels[0].ce_count++;
+}
+
+static void i5100_handle_ue(struct mem_ctl_info *mci,
+			    int ctlr,
+			    unsigned bank,
+			    unsigned rank,
+			    unsigned long syndrome,
+			    unsigned cas,
+			    unsigned ras,
+			    const char *msg)
+{
+	const int csrow = i5100_rank_to_csrow(mci, ctlr, rank);
+
+	printk(KERN_ERR
+		"UE ctlr %d, bank %u, rank %u, syndrome 0x%lx, "
+		"cas %u, ras %u, csrow %u, label \"%s\": %s\n",
+		ctlr, bank, rank, syndrome, cas, ras,
+		csrow, mci->csrows[csrow].channels[0].label, msg);
+
+	mci->ue_count++;
+	mci->csrows[csrow].ue_count++;
+}
+
+static void i5100_read_log(struct mem_ctl_info *mci, int ctlr,
+			   u32 ferr, u32 nerr)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *pdev = (ctlr) ? priv->ch1mm : priv->ch0mm;
+	u32 dw;
+	u32 dw2;
+	unsigned syndrome = 0;
+	unsigned ecc_loc = 0;
+	unsigned merr;
+	unsigned bank;
+	unsigned rank;
+	unsigned cas;
+	unsigned ras;
+
+	pci_read_config_dword(pdev, I5100_VALIDLOG, &dw);
+
+	if (I5100_VALIDLOG_REDMEMVALID(dw)) {
+		pci_read_config_dword(pdev, I5100_REDMEMA, &dw2);
+		syndrome = I5100_REDMEMA_SYNDROME(dw2);
+		pci_read_config_dword(pdev, I5100_REDMEMB, &dw2);
+		ecc_loc = I5100_REDMEMB_ECC_LOCATOR(dw2);
+	}
+
+	if (I5100_VALIDLOG_RECMEMVALID(dw)) {
+		const char *msg;
+
+		pci_read_config_dword(pdev, I5100_RECMEMA, &dw2);
+		merr = I5100_RECMEMA_MERR(dw2);
+		bank = I5100_RECMEMA_BANK(dw2);
+		rank = I5100_RECMEMA_RANK(dw2);
+
+		pci_read_config_dword(pdev, I5100_RECMEMB, &dw2);
+		cas = I5100_RECMEMB_CAS(dw2);
+		ras = I5100_RECMEMB_RAS(dw2);
+
+		/* FIXME:  not really sure if this is what merr is...
+		 */
+		if (!merr)
+			msg = i5100_err_msg(ferr);
+		else
+			msg = i5100_err_msg(nerr);
+
+		i5100_handle_ce(mci, ctlr, bank, rank, syndrome, cas, ras, msg);
+	}
+
+	if (I5100_VALIDLOG_NRECMEMVALID(dw)) {
+		const char *msg;
+
+		pci_read_config_dword(pdev, I5100_NRECMEMA, &dw2);
+		merr = I5100_NRECMEMA_MERR(dw2);
+		bank = I5100_NRECMEMA_BANK(dw2);
+		rank = I5100_NRECMEMA_RANK(dw2);
+
+		pci_read_config_dword(pdev, I5100_NRECMEMB, &dw2);
+		cas = I5100_NRECMEMB_CAS(dw2);
+		ras = I5100_NRECMEMB_RAS(dw2);
+
+		/* FIXME:  not really sure if this is what merr is...
+		 */
+		if (!merr)
+			msg = i5100_err_msg(ferr);
+		else
+			msg = i5100_err_msg(nerr);
+
+		i5100_handle_ue(mci, ctlr, bank, rank, syndrome, cas, ras, msg);
+	}
+
+	pci_write_config_dword(pdev, I5100_VALIDLOG, dw);
+}
+
+static void i5100_check_error(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u32 dw;
+
+
+	pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw);
+	if (I5100_FERR_NF_MEM_ANY(dw)) {
+		u32 dw2;
+
+		pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2);
+		if (dw2)
+			pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM,
+					       dw2);
+		pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
+
+		i5100_read_log(mci, I5100_FERR_NF_MEM_CHAN_INDX(dw),
+			       I5100_FERR_NF_MEM_ANY(dw),
+			       I5100_NERR_NF_MEM_ANY(dw2));
+	}
+}
+
+static struct pci_dev *pci_get_device_func(unsigned vendor,
+					   unsigned device,
+					   unsigned func)
+{
+	struct pci_dev *ret = NULL;
+
+	while (1) {
+		ret = pci_get_device(vendor, device, ret);
+
+		if (!ret)
+			break;
+
+		if (PCI_FUNC(ret->devfn) == func)
+			break;
+	}
+
+	return ret;
+}
+
+static unsigned long __devinit i5100_npages(struct mem_ctl_info *mci,
+					    int csrow)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	const unsigned ctlr_rank = i5100_csrow_to_rank(mci, csrow);
+	const unsigned ctlr = i5100_csrow_to_cntlr(mci, csrow);
+	unsigned addr_lines;
+
+	/* dimm present? */
+	if (!priv->mtr[ctlr][ctlr_rank].present)
+		return 0ULL;
+
+	addr_lines =
+		I5100_DIMM_ADDR_LINES +
+		priv->mtr[ctlr][ctlr_rank].numcol +
+		priv->mtr[ctlr][ctlr_rank].numrow +
+		priv->mtr[ctlr][ctlr_rank].numbank;
+
+	return (unsigned long)
+		((unsigned long long) (1ULL << addr_lines) / PAGE_SIZE);
+}
+
+static void __devinit i5100_init_mtr(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
+	int i;
+
+	for (i = 0; i < I5100_MAX_CTLRS; i++) {
+		int j;
+		struct pci_dev *pdev = mms[i];
+
+		for (j = 0; j < I5100_MAX_RANKS_PER_CTLR; j++) {
+			const unsigned addr =
+				(j < 4) ? I5100_MTR_0 + j * 2 :
+					  I5100_MTR_4 + (j - 4) * 2;
+			u16 w;
+
+			pci_read_config_word(pdev, addr, &w);
+
+			priv->mtr[i][j].present = I5100_MTR_PRESENT(w);
+			priv->mtr[i][j].ethrottle = I5100_MTR_ETHROTTLE(w);
+			priv->mtr[i][j].width = 4 + 4 * I5100_MTR_WIDTH(w);
+			priv->mtr[i][j].numbank = 2 + I5100_MTR_NUMBANK(w);
+			priv->mtr[i][j].numrow = 13 + I5100_MTR_NUMROW(w);
+			priv->mtr[i][j].numcol = 10 + I5100_MTR_NUMCOL(w);
+		}
+	}
+}
+
+/*
+ * FIXME: make this into a real i2c adapter (so that dimm-decode
+ * will work)?
+ */
+static int i5100_read_spd_byte(const struct mem_ctl_info *mci,
+			       u8 ch, u8 slot, u8 addr, u8 *byte)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u16 w;
+	u32 dw;
+	unsigned long et;
+
+	pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
+	if (I5100_SPDDATA_BUSY(w))
+		return -1;
+
+	dw =	I5100_SPDCMD_DTI(0xa) |
+		I5100_SPDCMD_CKOVRD(1) |
+		I5100_SPDCMD_SA(ch * 4 + slot) |
+		I5100_SPDCMD_BA(addr) |
+		I5100_SPDCMD_DATA(0) |
+		I5100_SPDCMD_CMD(0);
+	pci_write_config_dword(priv->mc, I5100_SPDCMD, dw);
+
+	/* wait up to 100ms */
+	et = jiffies + HZ / 10;
+	udelay(100);
+	while (1) {
+		pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
+		if (!I5100_SPDDATA_BUSY(w))
+			break;
+		udelay(100);
+	}
+
+	if (!I5100_SPDDATA_RDO(w) || I5100_SPDDATA_SBE(w))
+		return -1;
+
+	*byte = I5100_SPDDATA_DATA(w);
+
+	return 0;
+}
+
+/*
+ * fill dimm chip select map
+ *
+ * FIXME:
+ *   o only valid for 4 ranks per controller
+ *   o not the only way to may chip selects to dimm slots
+ *   o investigate if there is some way to obtain this map from the bios
+ */
+static void __devinit i5100_init_dimm_csmap(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	WARN_ON(priv->ranksperctlr != 4);
+
+	for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CTLR; i++) {
+		int j;
+
+		for (j = 0; j < I5100_MAX_RANKS_PER_DIMM; j++)
+			priv->dimm_csmap[i][j] = -1; /* default NC */
+	}
+
+	/* only 2 chip selects per slot... */
+	priv->dimm_csmap[0][0] = 0;
+	priv->dimm_csmap[0][1] = 3;
+	priv->dimm_csmap[1][0] = 1;
+	priv->dimm_csmap[1][1] = 2;
+	priv->dimm_csmap[2][0] = 2;
+	priv->dimm_csmap[3][0] = 3;
+}
+
+static void __devinit i5100_init_dimm_layout(struct pci_dev *pdev,
+					     struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < I5100_MAX_CTLRS; i++) {
+		int j;
+
+		for (j = 0; j < I5100_MAX_DIMM_SLOTS_PER_CTLR; j++) {
+			u8 rank;
+
+			if (i5100_read_spd_byte(mci, i, j, 5, &rank) < 0)
+				priv->dimm_numrank[i][j] = 0;
+			else
+				priv->dimm_numrank[i][j] = (rank & 3) + 1;
+		}
+	}
+
+	i5100_init_dimm_csmap(mci);
+}
+
+static void __devinit i5100_init_interleaving(struct pci_dev *pdev,
+					      struct mem_ctl_info *mci)
+{
+	u16 w;
+	u32 dw;
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
+	int i;
+
+	pci_read_config_word(pdev, I5100_TOLM, &w);
+	priv->tolm = (u64) I5100_TOLM_TOLM(w) * 256 * 1024 * 1024;
+
+	pci_read_config_word(pdev, I5100_MIR0, &w);
+	priv->mir[0].limit = (u64) I5100_MIR_LIMIT(w) << 28;
+	priv->mir[0].way[1] = I5100_MIR_WAY1(w);
+	priv->mir[0].way[0] = I5100_MIR_WAY0(w);
+
+	pci_read_config_word(pdev, I5100_MIR1, &w);
+	priv->mir[1].limit = (u64) I5100_MIR_LIMIT(w) << 28;
+	priv->mir[1].way[1] = I5100_MIR_WAY1(w);
+	priv->mir[1].way[0] = I5100_MIR_WAY0(w);
+
+	pci_read_config_word(pdev, I5100_AMIR_0, &w);
+	priv->amir[0] = w;
+	pci_read_config_word(pdev, I5100_AMIR_1, &w);
+	priv->amir[1] = w;
+
+	for (i = 0; i < I5100_MAX_CTLRS; i++) {
+		int j;
+
+		for (j = 0; j < 5; j++) {
+			int k;
+
+			pci_read_config_dword(mms[i], I5100_DMIR + j * 4, &dw);
+
+			priv->dmir[i][j].limit =
+				(u64) I5100_DMIR_LIMIT(dw) << 28;
+			for (k = 0; k < I5100_MAX_RANKS_PER_DIMM; k++)
+				priv->dmir[i][j].rank[k] =
+					I5100_DMIR_RANK(dw, k);
+		}
+	}
+
+	i5100_init_mtr(mci);
+}
+
+static void __devinit i5100_init_csrows(struct mem_ctl_info *mci)
+{
+	int i;
+	unsigned long total_pages = 0UL;
+	struct i5100_priv *priv = mci->pvt_info;
+
+	for (i = 0; i < mci->nr_csrows; i++) {
+		const unsigned long npages = i5100_npages(mci, i);
+		const unsigned cntlr = i5100_csrow_to_cntlr(mci, i);
+		const unsigned rank = i5100_csrow_to_rank(mci, i);
+
+		if (!npages)
+			continue;
+
+		/*
+		 * FIXME: these two are totally bogus -- I don't see how to
+		 * map them correctly to this structure...
+		 */
+		mci->csrows[i].first_page = total_pages;
+		mci->csrows[i].last_page = total_pages + npages - 1;
+		mci->csrows[i].page_mask = 0UL;
+
+		mci->csrows[i].nr_pages = npages;
+		mci->csrows[i].grain = 32;
+		mci->csrows[i].csrow_idx = i;
+		mci->csrows[i].dtype =
+			(priv->mtr[cntlr][rank].width == 4) ? DEV_X4 : DEV_X8;
+		mci->csrows[i].ue_count = 0;
+		mci->csrows[i].ce_count = 0;
+		mci->csrows[i].mtype = MEM_RDDR2;
+		mci->csrows[i].edac_mode = EDAC_SECDED;
+		mci->csrows[i].mci = mci;
+		mci->csrows[i].nr_channels = 1;
+		mci->csrows[i].channels[0].chan_idx = 0;
+		mci->csrows[i].channels[0].ce_count = 0;
+		mci->csrows[i].channels[0].csrow = mci->csrows + i;
+		snprintf(mci->csrows[i].channels[0].label,
+			 sizeof(mci->csrows[i].channels[0].label),
+			 "DIMM%u", i5100_rank_to_slot(mci, cntlr, rank));
+
+		total_pages += npages;
+	}
+}
+
+static int __devinit i5100_init_one(struct pci_dev *pdev,
+				    const struct pci_device_id *id)
+{
+	int rc;
+	struct mem_ctl_info *mci;
+	struct i5100_priv *priv;
+	struct pci_dev *ch0mm, *ch1mm;
+	int ret = 0;
+	u32 dw;
+	int ranksperch;
+
+	if (PCI_FUNC(pdev->devfn) != 1)
+		return -ENODEV;
+
+	rc = pci_enable_device(pdev);
+	if (rc < 0) {
+		ret = rc;
+		goto bail;
+	}
+
+	/* figure out how many ranks, from strapped state of 48GB_Mode input */
+	pci_read_config_dword(pdev, I5100_MS, &dw);
+	ranksperch = !!(dw & (1 << 8)) * 2 + 4;
+
+	if (ranksperch != 4) {
+		/* FIXME: get 6 ranks / controller to work - need hw... */
+		printk(KERN_INFO "i5100_edac: unsupported configuration.\n");
+		ret = -ENODEV;
+		goto bail;
+	}
+
+	/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
+	ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_21, 0);
+	if (!ch0mm)
+		return -ENODEV;
+
+	rc = pci_enable_device(ch0mm);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_ch0;
+	}
+
+	/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
+	ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_22, 0);
+	if (!ch1mm) {
+		ret = -ENODEV;
+		goto bail_ch0;
+	}
+
+	rc = pci_enable_device(ch1mm);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_ch1;
+	}
+
+	mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
+	if (!mci) {
+		ret = -ENOMEM;
+		goto bail_ch1;
+	}
+
+	mci->dev = &pdev->dev;
+
+	priv = mci->pvt_info;
+	priv->ranksperctlr = ranksperch;
+	priv->mc = pdev;
+	priv->ch0mm = ch0mm;
+	priv->ch1mm = ch1mm;
+
+	i5100_init_dimm_layout(pdev, mci);
+	i5100_init_interleaving(pdev, mci);
+
+	mci->mtype_cap = MEM_FLAG_FB_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = "i5100_edac.c";
+	mci->mod_ver = "not versioned";
+	mci->ctl_name = "i5100";
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = i5100_ctl_page_to_phys;
+
+	mci->edac_check = i5100_check_error;
+
+	i5100_init_csrows(mci);
+
+	/* this strange construction seems to be in every driver, dunno why */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_NMI:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_POLL;
+		break;
+	}
+
+	if (edac_mc_add_mc(mci)) {
+		ret = -ENODEV;
+		goto bail_mc;
+	}
+
+	goto bail;
+
+bail_mc:
+	edac_mc_free(mci);
+
+bail_ch1:
+	pci_dev_put(ch1mm);
+
+bail_ch0:
+	pci_dev_put(ch0mm);
+
+bail:
+	return ret;
+}
+
+static void __devexit i5100_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i5100_priv *priv;
+
+	mci = edac_mc_del_mc(&pdev->dev);
+
+	if (!mci)
+		return;
+
+	priv = mci->pvt_info;
+	pci_dev_put(priv->ch0mm);
+	pci_dev_put(priv->ch1mm);
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i5100_pci_tbl[] __devinitdata = {
+	/* Device 16, Function 0, Channel 0 Memory Map, Error Flag/Mask, ... */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5100_16) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, i5100_pci_tbl);
+
+static struct pci_driver i5100_driver = {
+	.name = KBUILD_BASENAME,
+	.probe = i5100_init_one,
+	.remove = __devexit_p(i5100_remove_one),
+	.id_table = i5100_pci_tbl,
+};
+
+static int __init i5100_init(void)
+{
+	int pci_rc;
+
+	pci_rc = pci_register_driver(&i5100_driver);
+
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+static void __exit i5100_exit(void)
+{
+	pci_unregister_driver(&i5100_driver);
+}
+
+module_init(i5100_init);
+module_exit(i5100_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR
+    ("Arthur Jones <ajones@riverbed.com>");
+MODULE_DESCRIPTION("MC Driver for Intel I5100 memory controllers");
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 119ae7b8f02..c3b1761aba2 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2400,6 +2400,9 @@
 #define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
 #define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
 #define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
+#define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
+#define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
+#define PCI_DEVICE_ID_INTEL_5100_22	0x65f6
 #define PCI_DEVICE_ID_INTEL_5400_ERR	0x4030
 #define PCI_DEVICE_ID_INTEL_5400_FBD0	0x4035
 #define PCI_DEVICE_ID_INTEL_5400_FBD1	0x4036
-- 
cgit v1.2.3


From f7952ffcffa88c9a3fa92c26081f4ec9143c680f Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:05 -0700
Subject: edac: i5100 fix missing bits

The error mask we use to trigger ECC notifications is missing many bits of
interest.  We add these bits here so that all possible ECC errors can be
reported.

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/i5100_edac.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index 43430bf7018..a8767a6c148 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -52,12 +52,24 @@
 #define		I5100_FERR_NF_MEM_M16ERR_MASK	(1 << 16)
 #define		I5100_FERR_NF_MEM_M15ERR_MASK	(1 << 15)
 #define		I5100_FERR_NF_MEM_M14ERR_MASK	(1 << 14)
-#define		I5100_FERR_NF_MEM_
-#define		I5100_FERR_NF_MEM_
+#define		I5100_FERR_NF_MEM_M12ERR_MASK	(1 << 12)
+#define		I5100_FERR_NF_MEM_M11ERR_MASK	(1 << 11)
+#define		I5100_FERR_NF_MEM_M10ERR_MASK	(1 << 10)
+#define		I5100_FERR_NF_MEM_M6ERR_MASK	(1 << 6)
+#define		I5100_FERR_NF_MEM_M5ERR_MASK	(1 << 5)
+#define		I5100_FERR_NF_MEM_M4ERR_MASK	(1 << 4)
+#define		I5100_FERR_NF_MEM_M1ERR_MASK	1
 #define		I5100_FERR_NF_MEM_ANY_MASK	\
 			(I5100_FERR_NF_MEM_M16ERR_MASK | \
 			I5100_FERR_NF_MEM_M15ERR_MASK | \
-			I5100_FERR_NF_MEM_M14ERR_MASK)
+			I5100_FERR_NF_MEM_M14ERR_MASK | \
+			I5100_FERR_NF_MEM_M12ERR_MASK | \
+			I5100_FERR_NF_MEM_M11ERR_MASK | \
+			I5100_FERR_NF_MEM_M10ERR_MASK | \
+			I5100_FERR_NF_MEM_M6ERR_MASK | \
+			I5100_FERR_NF_MEM_M5ERR_MASK | \
+			I5100_FERR_NF_MEM_M4ERR_MASK | \
+			I5100_FERR_NF_MEM_M1ERR_MASK)
 #define		I5100_FERR_NF_MEM_ANY(a)  ((a) & I5100_FERR_NF_MEM_ANY_MASK)
 #define	I5100_NERR_NF_MEM	0xa4	/* MC Next Non-Fatal Errors */
 #define		I5100_NERR_NF_MEM_ANY(a)  I5100_FERR_NF_MEM_ANY(a)
-- 
cgit v1.2.3


From 43920a598f9358a12eb59eeddc4cd950f03aea8c Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:06 -0700
Subject: edac: i5100 fix enable ecc hardware

It is possible that the BIOS did not enable ECC at boot time.  We check
for that case and fail to load if it is true.

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/i5100_edac.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index a8767a6c148..509eec860c3 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -24,6 +24,8 @@
 /* register addresses and bit field accessors... */
 
 /* device 16, func 1 */
+#define I5100_MC		0x40	/* Memory Control Register */
+#define		I5100_MC_ERRDETEN(a)	((a) >> 5 & 1)
 #define I5100_MS		0x44	/* Memory Status Register */
 #define I5100_SPDDATA		0x48	/* Serial Presence Detect Status Reg */
 #define		I5100_SPDDATA_RDO(a)	((a) >> 15 & 1)
@@ -688,6 +690,14 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
 		goto bail;
 	}
 
+	/* ECC enabled? */
+	pci_read_config_dword(pdev, I5100_MC, &dw);
+	if (!I5100_MC_ERRDETEN(dw)) {
+		printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
+		ret = -ENODEV;
+		goto bail;
+	}
+
 	/* figure out how many ranks, from strapped state of 48GB_Mode input */
 	pci_read_config_dword(pdev, I5100_MS, &dw);
 	ranksperch = !!(dw & (1 << 8)) * 2 + 4;
-- 
cgit v1.2.3


From 178d5a742291976d13bff55fa2b130879d4510de Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:06 -0700
Subject: edac: i5100 fix unmask ecc bits

Explicitly unmask ECC errors we are interested in reporting.

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/i5100_edac.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index 509eec860c3..d85e7992eb6 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -75,6 +75,7 @@
 #define		I5100_FERR_NF_MEM_ANY(a)  ((a) & I5100_FERR_NF_MEM_ANY_MASK)
 #define	I5100_NERR_NF_MEM	0xa4	/* MC Next Non-Fatal Errors */
 #define		I5100_NERR_NF_MEM_ANY(a)  I5100_FERR_NF_MEM_ANY(a)
+#define I5100_EMASK_MEM		0xa8	/* MC Error Mask Register */
 
 /* device 21 and 22, func 0 */
 #define I5100_MTR_0	0x154	/* Memory Technology Registers 0-3 */
@@ -709,6 +710,11 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
 		goto bail;
 	}
 
+	/* enable error reporting... */
+	pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
+	dw &= ~I5100_FERR_NF_MEM_ANY_MASK;
+	pci_write_config_dword(pdev, I5100_EMASK_MEM, dw);
+
 	/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
 	ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
 				    PCI_DEVICE_ID_INTEL_5100_21, 0);
-- 
cgit v1.2.3


From b238e57723a6fb2c365fc35de5d7c48ccf9300cd Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:08 -0700
Subject: edac: i5100: cleanup

Some code cleanliness issues found by Andrew Morton (thanks!) which should
not affect functionality, but which should help make the code more
maintainable.

In particular, we now:

* convert all #define's w/ a parameter to static inlines
* use 1UL rather than 1ULL when calculating an unsigned long
* use pci_disable_device

The resulting code is tested and seems to work fine...

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/i5100_edac.c | 396 ++++++++++++++++++++++++++++++----------------
 1 file changed, 261 insertions(+), 135 deletions(-)

diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index d85e7992eb6..22db05a67bf 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -21,36 +21,19 @@
 
 #include "edac_core.h"
 
-/* register addresses and bit field accessors... */
+/* register addresses */
 
 /* device 16, func 1 */
 #define I5100_MC		0x40	/* Memory Control Register */
-#define		I5100_MC_ERRDETEN(a)	((a) >> 5 & 1)
 #define I5100_MS		0x44	/* Memory Status Register */
 #define I5100_SPDDATA		0x48	/* Serial Presence Detect Status Reg */
-#define		I5100_SPDDATA_RDO(a)	((a) >> 15 & 1)
-#define		I5100_SPDDATA_SBE(a)	((a) >> 13 & 1)
-#define		I5100_SPDDATA_BUSY(a)	((a) >> 12 & 1)
-#define		I5100_SPDDATA_DATA(a)	((a)       & ((1 << 8) - 1))
 #define I5100_SPDCMD		0x4c	/* Serial Presence Detect Command Reg */
-#define		I5100_SPDCMD_DTI(a)	(((a) & ((1 << 4) - 1)) << 28)
-#define		I5100_SPDCMD_CKOVRD(a)	(((a) & 1)              << 27)
-#define		I5100_SPDCMD_SA(a)	(((a) & ((1 << 3) - 1)) << 24)
-#define		I5100_SPDCMD_BA(a)	(((a) & ((1 << 8) - 1)) << 16)
-#define		I5100_SPDCMD_DATA(a)	(((a) & ((1 << 8) - 1)) <<  8)
-#define		I5100_SPDCMD_CMD(a)	((a) & 1)
 #define I5100_TOLM		0x6c	/* Top of Low Memory */
-#define		I5100_TOLM_TOLM(a)	((a) >> 12 & ((1 << 4) - 1))
 #define I5100_MIR0		0x80	/* Memory Interleave Range 0 */
 #define I5100_MIR1		0x84	/* Memory Interleave Range 1 */
 #define I5100_AMIR_0		0x8c	/* Adjusted Memory Interleave Range 0 */
 #define I5100_AMIR_1		0x90	/* Adjusted Memory Interleave Range 1 */
-#define		I5100_MIR_LIMIT(a)	((a) >> 4 & ((1 << 12) - 1))
-#define		I5100_MIR_WAY1(a)	((a) >> 1 & 1)
-#define		I5100_MIR_WAY0(a)	((a)      & 1)
 #define I5100_FERR_NF_MEM	0xa0	/* MC First Non Fatal Errors */
-#define		I5100_FERR_NF_MEM_CHAN_INDX(a)	((a) >> 28 & 1)
-#define		I5100_FERR_NF_MEM_SPD_MASK	(1 << 18)
 #define		I5100_FERR_NF_MEM_M16ERR_MASK	(1 << 16)
 #define		I5100_FERR_NF_MEM_M15ERR_MASK	(1 << 15)
 #define		I5100_FERR_NF_MEM_M14ERR_MASK	(1 << 14)
@@ -72,47 +55,214 @@
 			I5100_FERR_NF_MEM_M5ERR_MASK | \
 			I5100_FERR_NF_MEM_M4ERR_MASK | \
 			I5100_FERR_NF_MEM_M1ERR_MASK)
-#define		I5100_FERR_NF_MEM_ANY(a)  ((a) & I5100_FERR_NF_MEM_ANY_MASK)
 #define	I5100_NERR_NF_MEM	0xa4	/* MC Next Non-Fatal Errors */
-#define		I5100_NERR_NF_MEM_ANY(a)  I5100_FERR_NF_MEM_ANY(a)
 #define I5100_EMASK_MEM		0xa8	/* MC Error Mask Register */
 
 /* device 21 and 22, func 0 */
 #define I5100_MTR_0	0x154	/* Memory Technology Registers 0-3 */
 #define I5100_DMIR	0x15c	/* DIMM Interleave Range */
-#define		I5100_DMIR_LIMIT(a)	((a) >> 16 & ((1 << 11) - 1))
-#define		I5100_DMIR_RANK(a, i)	((a) >> (4 * i) & ((1 <<  2) - 1))
-#define I5100_MTR_4	0x1b0	/* Memory Technology Registers 4,5 */
-#define		I5100_MTR_PRESENT(a)	((a) >> 10 & 1)
-#define		I5100_MTR_ETHROTTLE(a)	((a) >>  9 & 1)
-#define		I5100_MTR_WIDTH(a)	((a) >>  8 & 1)
-#define		I5100_MTR_NUMBANK(a)	((a) >>  6 & 1)
-#define		I5100_MTR_NUMROW(a)	((a) >>  2 & ((1 << 2) - 1))
-#define		I5100_MTR_NUMCOL(a)	((a)       & ((1 << 2) - 1))
 #define	I5100_VALIDLOG	0x18c	/* Valid Log Markers */
-#define		I5100_VALIDLOG_REDMEMVALID(a)	((a) >> 2 & 1)
-#define		I5100_VALIDLOG_RECMEMVALID(a)	((a) >> 1 & 1)
-#define		I5100_VALIDLOG_NRECMEMVALID(a)	((a)      & 1)
 #define	I5100_NRECMEMA	0x190	/* Non-Recoverable Memory Error Log Reg A */
-#define		I5100_NRECMEMA_MERR(a)		((a) >> 15 & ((1 << 5) - 1))
-#define		I5100_NRECMEMA_BANK(a)		((a) >> 12 & ((1 << 3) - 1))
-#define		I5100_NRECMEMA_RANK(a)		((a) >>  8 & ((1 << 3) - 1))
-#define		I5100_NRECMEMA_DM_BUF_ID(a)	((a)       & ((1 << 8) - 1))
 #define	I5100_NRECMEMB	0x194	/* Non-Recoverable Memory Error Log Reg B */
-#define		I5100_NRECMEMB_CAS(a)		((a) >> 16 & ((1 << 13) - 1))
-#define		I5100_NRECMEMB_RAS(a)		((a)       & ((1 << 16) - 1))
 #define	I5100_REDMEMA	0x198	/* Recoverable Memory Data Error Log Reg A */
-#define		I5100_REDMEMA_SYNDROME(a)	(a)
 #define	I5100_REDMEMB	0x19c	/* Recoverable Memory Data Error Log Reg B */
-#define		I5100_REDMEMB_ECC_LOCATOR(a)	((a) & ((1 << 18) - 1))
 #define	I5100_RECMEMA	0x1a0	/* Recoverable Memory Error Log Reg A */
-#define		I5100_RECMEMA_MERR(a)		I5100_NRECMEMA_MERR(a)
-#define		I5100_RECMEMA_BANK(a)		I5100_NRECMEMA_BANK(a)
-#define		I5100_RECMEMA_RANK(a)		I5100_NRECMEMA_RANK(a)
-#define		I5100_RECMEMA_DM_BUF_ID(a)	I5100_NRECMEMA_DM_BUF_ID(a)
 #define	I5100_RECMEMB	0x1a4	/* Recoverable Memory Error Log Reg B */
-#define		I5100_RECMEMB_CAS(a)		I5100_NRECMEMB_CAS(a)
-#define		I5100_RECMEMB_RAS(a)		I5100_NRECMEMB_RAS(a)
+#define I5100_MTR_4	0x1b0	/* Memory Technology Registers 4,5 */
+
+/* bit field accessors */
+
+static inline u32 i5100_mc_errdeten(u32 mc)
+{
+	return mc >> 5 & 1;
+}
+
+static inline u16 i5100_spddata_rdo(u16 a)
+{
+	return a >> 15 & 1;
+}
+
+static inline u16 i5100_spddata_sbe(u16 a)
+{
+	return a >> 13 & 1;
+}
+
+static inline u16 i5100_spddata_busy(u16 a)
+{
+	return a >> 12 & 1;
+}
+
+static inline u16 i5100_spddata_data(u16 a)
+{
+	return a & ((1 << 8) - 1);
+}
+
+static inline u32 i5100_spdcmd_create(u32 dti, u32 ckovrd, u32 sa, u32 ba,
+				      u32 data, u32 cmd)
+{
+	return	((dti & ((1 << 4) - 1))  << 28) |
+		((ckovrd & 1)            << 27) |
+		((sa & ((1 << 3) - 1))   << 24) |
+		((ba & ((1 << 8) - 1))   << 16) |
+		((data & ((1 << 8) - 1)) <<  8) |
+		(cmd & 1);
+}
+
+static inline u16 i5100_tolm_tolm(u16 a)
+{
+	return a >> 12 & ((1 << 4) - 1);
+}
+
+static inline u16 i5100_mir_limit(u16 a)
+{
+	return a >> 4 & ((1 << 12) - 1);
+}
+
+static inline u16 i5100_mir_way1(u16 a)
+{
+	return a >> 1 & 1;
+}
+
+static inline u16 i5100_mir_way0(u16 a)
+{
+	return a & 1;
+}
+
+static inline u32 i5100_ferr_nf_mem_chan_indx(u32 a)
+{
+	return a >> 28 & 1;
+}
+
+static inline u32 i5100_ferr_nf_mem_any(u32 a)
+{
+	return a & I5100_FERR_NF_MEM_ANY_MASK;
+}
+
+static inline u32 i5100_nerr_nf_mem_any(u32 a)
+{
+	return i5100_ferr_nf_mem_any(a);
+}
+
+static inline u32 i5100_dmir_limit(u32 a)
+{
+	return a >> 16 & ((1 << 11) - 1);
+}
+
+static inline u32 i5100_dmir_rank(u32 a, u32 i)
+{
+	return a >> (4 * i) & ((1 << 2) - 1);
+}
+
+static inline u16 i5100_mtr_present(u16 a)
+{
+	return a >> 10 & 1;
+}
+
+static inline u16 i5100_mtr_ethrottle(u16 a)
+{
+	return a >> 9 & 1;
+}
+
+static inline u16 i5100_mtr_width(u16 a)
+{
+	return a >> 8 & 1;
+}
+
+static inline u16 i5100_mtr_numbank(u16 a)
+{
+	return a >> 6 & 1;
+}
+
+static inline u16 i5100_mtr_numrow(u16 a)
+{
+	return a >> 2 & ((1 << 2) - 1);
+}
+
+static inline u16 i5100_mtr_numcol(u16 a)
+{
+	return a & ((1 << 2) - 1);
+}
+
+
+static inline u32 i5100_validlog_redmemvalid(u32 a)
+{
+	return a >> 2 & 1;
+}
+
+static inline u32 i5100_validlog_recmemvalid(u32 a)
+{
+	return a >> 1 & 1;
+}
+
+static inline u32 i5100_validlog_nrecmemvalid(u32 a)
+{
+	return a & 1;
+}
+
+static inline u32 i5100_nrecmema_merr(u32 a)
+{
+	return a >> 15 & ((1 << 5) - 1);
+}
+
+static inline u32 i5100_nrecmema_bank(u32 a)
+{
+	return a >> 12 & ((1 << 3) - 1);
+}
+
+static inline u32 i5100_nrecmema_rank(u32 a)
+{
+	return a >>  8 & ((1 << 3) - 1);
+}
+
+static inline u32 i5100_nrecmema_dm_buf_id(u32 a)
+{
+	return a & ((1 << 8) - 1);
+}
+
+static inline u32 i5100_nrecmemb_cas(u32 a)
+{
+	return a >> 16 & ((1 << 13) - 1);
+}
+
+static inline u32 i5100_nrecmemb_ras(u32 a)
+{
+	return a & ((1 << 16) - 1);
+}
+
+static inline u32 i5100_redmemb_ecc_locator(u32 a)
+{
+	return a & ((1 << 18) - 1);
+}
+
+static inline u32 i5100_recmema_merr(u32 a)
+{
+	return i5100_nrecmema_merr(a);
+}
+
+static inline u32 i5100_recmema_bank(u32 a)
+{
+	return i5100_nrecmema_bank(a);
+}
+
+static inline u32 i5100_recmema_rank(u32 a)
+{
+	return i5100_nrecmema_rank(a);
+}
+
+static inline u32 i5100_recmema_dm_buf_id(u32 a)
+{
+	return i5100_nrecmema_dm_buf_id(a);
+}
+
+static inline u32 i5100_recmemb_cas(u32 a)
+{
+	return i5100_nrecmemb_cas(a);
+}
+
+static inline u32 i5100_recmemb_ras(u32 a)
+{
+	return i5100_nrecmemb_ras(a);
+}
 
 /* some generic limits */
 #define I5100_MAX_RANKS_PER_CTLR	6
@@ -189,42 +339,9 @@ static int i5100_rank_to_slot(const struct mem_ctl_info *mci,
 	return -1;
 }
 
-/*
- * The processor bus memory addresses are broken into three
- * pieces, whereas the controller addresses are contiguous.
- *
- * here we map from the controller address space to the
- * processor address space:
- *
- *    Processor Address Space
- * +-----------------------------+
- * |                             |
- * |  "high" memory addresses    |
- * |                             |
- * +-----------------------------+ <- 4GB on the i5100
- * |                             |
- * |  other non-memory addresses |
- * |                             |
- * +-----------------------------+ <- top of low memory
- * |                             |
- * | "low" memory addresses      |
- * |                             |
- * +-----------------------------+
- */
-static unsigned long i5100_ctl_page_to_phys(struct mem_ctl_info *mci,
-					    unsigned long cntlr_addr)
-{
-	const struct i5100_priv *priv = mci->pvt_info;
-
-	if (cntlr_addr < priv->tolm)
-		return cntlr_addr;
-
-	return (1ULL << 32) + (cntlr_addr - priv->tolm);
-}
-
 static const char *i5100_err_msg(unsigned err)
 {
-	const char *merrs[] = {
+	static const char *merrs[] = {
 		"unknown", /* 0 */
 		"uncorrectable data ECC on replay", /* 1 */
 		"unknown", /* 2 */
@@ -341,24 +458,24 @@ static void i5100_read_log(struct mem_ctl_info *mci, int ctlr,
 
 	pci_read_config_dword(pdev, I5100_VALIDLOG, &dw);
 
-	if (I5100_VALIDLOG_REDMEMVALID(dw)) {
+	if (i5100_validlog_redmemvalid(dw)) {
 		pci_read_config_dword(pdev, I5100_REDMEMA, &dw2);
-		syndrome = I5100_REDMEMA_SYNDROME(dw2);
+		syndrome = dw2;
 		pci_read_config_dword(pdev, I5100_REDMEMB, &dw2);
-		ecc_loc = I5100_REDMEMB_ECC_LOCATOR(dw2);
+		ecc_loc = i5100_redmemb_ecc_locator(dw2);
 	}
 
-	if (I5100_VALIDLOG_RECMEMVALID(dw)) {
+	if (i5100_validlog_recmemvalid(dw)) {
 		const char *msg;
 
 		pci_read_config_dword(pdev, I5100_RECMEMA, &dw2);
-		merr = I5100_RECMEMA_MERR(dw2);
-		bank = I5100_RECMEMA_BANK(dw2);
-		rank = I5100_RECMEMA_RANK(dw2);
+		merr = i5100_recmema_merr(dw2);
+		bank = i5100_recmema_bank(dw2);
+		rank = i5100_recmema_rank(dw2);
 
 		pci_read_config_dword(pdev, I5100_RECMEMB, &dw2);
-		cas = I5100_RECMEMB_CAS(dw2);
-		ras = I5100_RECMEMB_RAS(dw2);
+		cas = i5100_recmemb_cas(dw2);
+		ras = i5100_recmemb_ras(dw2);
 
 		/* FIXME:  not really sure if this is what merr is...
 		 */
@@ -370,17 +487,17 @@ static void i5100_read_log(struct mem_ctl_info *mci, int ctlr,
 		i5100_handle_ce(mci, ctlr, bank, rank, syndrome, cas, ras, msg);
 	}
 
-	if (I5100_VALIDLOG_NRECMEMVALID(dw)) {
+	if (i5100_validlog_nrecmemvalid(dw)) {
 		const char *msg;
 
 		pci_read_config_dword(pdev, I5100_NRECMEMA, &dw2);
-		merr = I5100_NRECMEMA_MERR(dw2);
-		bank = I5100_NRECMEMA_BANK(dw2);
-		rank = I5100_NRECMEMA_RANK(dw2);
+		merr = i5100_nrecmema_merr(dw2);
+		bank = i5100_nrecmema_bank(dw2);
+		rank = i5100_nrecmema_rank(dw2);
 
 		pci_read_config_dword(pdev, I5100_NRECMEMB, &dw2);
-		cas = I5100_NRECMEMB_CAS(dw2);
-		ras = I5100_NRECMEMB_RAS(dw2);
+		cas = i5100_nrecmemb_cas(dw2);
+		ras = i5100_nrecmemb_ras(dw2);
 
 		/* FIXME:  not really sure if this is what merr is...
 		 */
@@ -402,7 +519,7 @@ static void i5100_check_error(struct mem_ctl_info *mci)
 
 
 	pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw);
-	if (I5100_FERR_NF_MEM_ANY(dw)) {
+	if (i5100_ferr_nf_mem_any(dw)) {
 		u32 dw2;
 
 		pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2);
@@ -411,9 +528,9 @@ static void i5100_check_error(struct mem_ctl_info *mci)
 					       dw2);
 		pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
 
-		i5100_read_log(mci, I5100_FERR_NF_MEM_CHAN_INDX(dw),
-			       I5100_FERR_NF_MEM_ANY(dw),
-			       I5100_NERR_NF_MEM_ANY(dw2));
+		i5100_read_log(mci, i5100_ferr_nf_mem_chan_indx(dw),
+			       i5100_ferr_nf_mem_any(dw),
+			       i5100_nerr_nf_mem_any(dw2));
 	}
 }
 
@@ -476,12 +593,12 @@ static void __devinit i5100_init_mtr(struct mem_ctl_info *mci)
 
 			pci_read_config_word(pdev, addr, &w);
 
-			priv->mtr[i][j].present = I5100_MTR_PRESENT(w);
-			priv->mtr[i][j].ethrottle = I5100_MTR_ETHROTTLE(w);
-			priv->mtr[i][j].width = 4 + 4 * I5100_MTR_WIDTH(w);
-			priv->mtr[i][j].numbank = 2 + I5100_MTR_NUMBANK(w);
-			priv->mtr[i][j].numrow = 13 + I5100_MTR_NUMROW(w);
-			priv->mtr[i][j].numcol = 10 + I5100_MTR_NUMCOL(w);
+			priv->mtr[i][j].present = i5100_mtr_present(w);
+			priv->mtr[i][j].ethrottle = i5100_mtr_ethrottle(w);
+			priv->mtr[i][j].width = 4 + 4 * i5100_mtr_width(w);
+			priv->mtr[i][j].numbank = 2 + i5100_mtr_numbank(w);
+			priv->mtr[i][j].numrow = 13 + i5100_mtr_numrow(w);
+			priv->mtr[i][j].numcol = 10 + i5100_mtr_numcol(w);
 		}
 	}
 }
@@ -495,35 +612,30 @@ static int i5100_read_spd_byte(const struct mem_ctl_info *mci,
 {
 	struct i5100_priv *priv = mci->pvt_info;
 	u16 w;
-	u32 dw;
 	unsigned long et;
 
 	pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
-	if (I5100_SPDDATA_BUSY(w))
+	if (i5100_spddata_busy(w))
 		return -1;
 
-	dw =	I5100_SPDCMD_DTI(0xa) |
-		I5100_SPDCMD_CKOVRD(1) |
-		I5100_SPDCMD_SA(ch * 4 + slot) |
-		I5100_SPDCMD_BA(addr) |
-		I5100_SPDCMD_DATA(0) |
-		I5100_SPDCMD_CMD(0);
-	pci_write_config_dword(priv->mc, I5100_SPDCMD, dw);
+	pci_write_config_dword(priv->mc, I5100_SPDCMD,
+			       i5100_spdcmd_create(0xa, 1, ch * 4 + slot, addr,
+						   0, 0));
 
 	/* wait up to 100ms */
 	et = jiffies + HZ / 10;
 	udelay(100);
 	while (1) {
 		pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
-		if (!I5100_SPDDATA_BUSY(w))
+		if (!i5100_spddata_busy(w))
 			break;
 		udelay(100);
 	}
 
-	if (!I5100_SPDDATA_RDO(w) || I5100_SPDDATA_SBE(w))
+	if (!i5100_spddata_rdo(w) || i5100_spddata_sbe(w))
 		return -1;
 
-	*byte = I5100_SPDDATA_DATA(w);
+	*byte = i5100_spddata_data(w);
 
 	return 0;
 }
@@ -591,17 +703,17 @@ static void __devinit i5100_init_interleaving(struct pci_dev *pdev,
 	int i;
 
 	pci_read_config_word(pdev, I5100_TOLM, &w);
-	priv->tolm = (u64) I5100_TOLM_TOLM(w) * 256 * 1024 * 1024;
+	priv->tolm = (u64) i5100_tolm_tolm(w) * 256 * 1024 * 1024;
 
 	pci_read_config_word(pdev, I5100_MIR0, &w);
-	priv->mir[0].limit = (u64) I5100_MIR_LIMIT(w) << 28;
-	priv->mir[0].way[1] = I5100_MIR_WAY1(w);
-	priv->mir[0].way[0] = I5100_MIR_WAY0(w);
+	priv->mir[0].limit = (u64) i5100_mir_limit(w) << 28;
+	priv->mir[0].way[1] = i5100_mir_way1(w);
+	priv->mir[0].way[0] = i5100_mir_way0(w);
 
 	pci_read_config_word(pdev, I5100_MIR1, &w);
-	priv->mir[1].limit = (u64) I5100_MIR_LIMIT(w) << 28;
-	priv->mir[1].way[1] = I5100_MIR_WAY1(w);
-	priv->mir[1].way[0] = I5100_MIR_WAY0(w);
+	priv->mir[1].limit = (u64) i5100_mir_limit(w) << 28;
+	priv->mir[1].way[1] = i5100_mir_way1(w);
+	priv->mir[1].way[0] = i5100_mir_way0(w);
 
 	pci_read_config_word(pdev, I5100_AMIR_0, &w);
 	priv->amir[0] = w;
@@ -617,10 +729,10 @@ static void __devinit i5100_init_interleaving(struct pci_dev *pdev,
 			pci_read_config_dword(mms[i], I5100_DMIR + j * 4, &dw);
 
 			priv->dmir[i][j].limit =
-				(u64) I5100_DMIR_LIMIT(dw) << 28;
+				(u64) i5100_dmir_limit(dw) << 28;
 			for (k = 0; k < I5100_MAX_RANKS_PER_DIMM; k++)
 				priv->dmir[i][j].rank[k] =
-					I5100_DMIR_RANK(dw, k);
+					i5100_dmir_rank(dw, k);
 		}
 	}
 
@@ -693,10 +805,10 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
 
 	/* ECC enabled? */
 	pci_read_config_dword(pdev, I5100_MC, &dw);
-	if (!I5100_MC_ERRDETEN(dw)) {
+	if (!i5100_mc_errdeten(dw)) {
 		printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
 		ret = -ENODEV;
-		goto bail;
+		goto bail_pdev;
 	}
 
 	/* figure out how many ranks, from strapped state of 48GB_Mode input */
@@ -707,7 +819,7 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
 		/* FIXME: get 6 ranks / controller to work - need hw... */
 		printk(KERN_INFO "i5100_edac: unsupported configuration.\n");
 		ret = -ENODEV;
-		goto bail;
+		goto bail_pdev;
 	}
 
 	/* enable error reporting... */
@@ -718,8 +830,10 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
 	/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
 	ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
 				    PCI_DEVICE_ID_INTEL_5100_21, 0);
-	if (!ch0mm)
-		return -ENODEV;
+	if (!ch0mm) {
+		ret = -ENODEV;
+		goto bail_pdev;
+	}
 
 	rc = pci_enable_device(ch0mm);
 	if (rc < 0) {
@@ -732,7 +846,7 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
 				    PCI_DEVICE_ID_INTEL_5100_22, 0);
 	if (!ch1mm) {
 		ret = -ENODEV;
-		goto bail_ch0;
+		goto bail_disable_ch0;
 	}
 
 	rc = pci_enable_device(ch1mm);
@@ -744,7 +858,7 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
 	mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
 	if (!mci) {
 		ret = -ENOMEM;
-		goto bail_ch1;
+		goto bail_disable_ch1;
 	}
 
 	mci->dev = &pdev->dev;
@@ -765,7 +879,7 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
 	mci->mod_ver = "not versioned";
 	mci->ctl_name = "i5100";
 	mci->dev_name = pci_name(pdev);
-	mci->ctl_page_to_phys = i5100_ctl_page_to_phys;
+	mci->ctl_page_to_phys = NULL;
 
 	mci->edac_check = i5100_check_error;
 
@@ -786,17 +900,26 @@ static int __devinit i5100_init_one(struct pci_dev *pdev,
 		goto bail_mc;
 	}
 
-	goto bail;
+	return ret;
 
 bail_mc:
 	edac_mc_free(mci);
 
+bail_disable_ch1:
+	pci_disable_device(ch1mm);
+
 bail_ch1:
 	pci_dev_put(ch1mm);
 
+bail_disable_ch0:
+	pci_disable_device(ch0mm);
+
 bail_ch0:
 	pci_dev_put(ch0mm);
 
+bail_pdev:
+	pci_disable_device(pdev);
+
 bail:
 	return ret;
 }
@@ -812,6 +935,9 @@ static void __devexit i5100_remove_one(struct pci_dev *pdev)
 		return;
 
 	priv = mci->pvt_info;
+	pci_disable_device(pdev);
+	pci_disable_device(priv->ch0mm);
+	pci_disable_device(priv->ch1mm);
 	pci_dev_put(priv->ch0mm);
 	pci_dev_put(priv->ch1mm);
 
-- 
cgit v1.2.3


From 14cc571bb1d072d3f4be2875ea520ab03e093471 Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:08 -0700
Subject: edac: core fix to use dynamic kobject

Static kobjects are not supported in linux kernel.  Convert the
edac_pci_top_main_kobj from static to dynamic.  This avoids the double
free of the edac_pci_top_main_kobj.name that we see on module reload of
the e752x edac driver (and probably others as well).

In addition Greg KH <greg@kroah.com> has pointed out that this code may be
cleaned up significantly.  I will look at that as a follow-on patch, for
now, I just want the minimum fix to get this double-free oops bug
squashed...

Many thanks to Greg KH for his patience in showing me what the
Documentation/kobject.txt already said (oops)...

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/edac_pci_sysfs.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index 2c1fa1bb6df..5c153dccc95 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -28,7 +28,7 @@ static int edac_pci_poll_msec = 1000;	/* one second workq period */
 static atomic_t pci_parity_count = ATOMIC_INIT(0);
 static atomic_t pci_nonparity_count = ATOMIC_INIT(0);
 
-static struct kobject edac_pci_top_main_kobj;
+static struct kobject *edac_pci_top_main_kobj;
 static atomic_t edac_pci_sysfs_refcount = ATOMIC_INIT(0);
 
 /* getter functions for the data variables */
@@ -83,7 +83,7 @@ static void edac_pci_instance_release(struct kobject *kobj)
 	pci = to_instance(kobj);
 
 	/* decrement reference count on top main kobj */
-	kobject_put(&edac_pci_top_main_kobj);
+	kobject_put(edac_pci_top_main_kobj);
 
 	kfree(pci);	/* Free the control struct */
 }
@@ -166,7 +166,7 @@ static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx)
 	 * track the number of PCI instances we have, and thus nest
 	 * properly on keeping the module loaded
 	 */
-	main_kobj = kobject_get(&edac_pci_top_main_kobj);
+	main_kobj = kobject_get(edac_pci_top_main_kobj);
 	if (!main_kobj) {
 		err = -ENODEV;
 		goto error_out;
@@ -174,11 +174,11 @@ static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx)
 
 	/* And now register this new kobject under the main kobj */
 	err = kobject_init_and_add(&pci->kobj, &ktype_pci_instance,
-				   &edac_pci_top_main_kobj, "pci%d", idx);
+				   edac_pci_top_main_kobj, "pci%d", idx);
 	if (err != 0) {
 		debugf2("%s() failed to register instance pci%d\n",
 			__func__, idx);
-		kobject_put(&edac_pci_top_main_kobj);
+		kobject_put(edac_pci_top_main_kobj);
 		goto error_out;
 	}
 
@@ -316,9 +316,10 @@ static struct edac_pci_dev_attribute *edac_pci_attr[] = {
  */
 static void edac_pci_release_main_kobj(struct kobject *kobj)
 {
-
 	debugf0("%s() here to module_put(THIS_MODULE)\n", __func__);
 
+	kfree(kobj);
+
 	/* last reference to top EDAC PCI kobject has been removed,
 	 * NOW release our ref count on the core module
 	 */
@@ -369,8 +370,16 @@ static int edac_pci_main_kobj_setup(void)
 		goto decrement_count_fail;
 	}
 
+	edac_pci_top_main_kobj = kzalloc(sizeof(struct kobject), GFP_KERNEL);
+	if (!edac_pci_top_main_kobj) {
+		debugf1("Failed to allocate\n");
+		err = -ENOMEM;
+		goto kzalloc_fail;
+	}
+
 	/* Instanstiate the pci object */
-	err = kobject_init_and_add(&edac_pci_top_main_kobj, &ktype_edac_pci_main_kobj,
+	err = kobject_init_and_add(edac_pci_top_main_kobj,
+				   &ktype_edac_pci_main_kobj,
 				   &edac_class->kset.kobj, "pci");
 	if (err) {
 		debugf1("Failed to register '.../edac/pci'\n");
@@ -381,13 +390,16 @@ static int edac_pci_main_kobj_setup(void)
 	 * for EDAC PCI, then edac_pci_main_kobj_teardown()
 	 * must be used, for resources to be cleaned up properly
 	 */
-	kobject_uevent(&edac_pci_top_main_kobj, KOBJ_ADD);
+	kobject_uevent(edac_pci_top_main_kobj, KOBJ_ADD);
 	debugf1("Registered '.../edac/pci' kobject\n");
 
 	return 0;
 
 	/* Error unwind statck */
 kobject_init_and_add_fail:
+	kfree(edac_pci_top_main_kobj);
+
+kzalloc_fail:
 	module_put(THIS_MODULE);
 
 decrement_count_fail:
@@ -414,7 +426,7 @@ static void edac_pci_main_kobj_teardown(void)
 	if (atomic_dec_return(&edac_pci_sysfs_refcount) == 0) {
 		debugf0("%s() called kobject_put on main kobj\n",
 			__func__);
-		kobject_put(&edac_pci_top_main_kobj);
+		kobject_put(edac_pci_top_main_kobj);
 	}
 }
 
-- 
cgit v1.2.3


From 096846e2b0ef39cb7c348f837f06984ef6ba8aa7 Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:09 -0700
Subject: edac: core fix workq timer

When updating the edac_mc_poll_msec module parameter from the sysfs
/sys/module/edac_core/parameters/edac_mc_poll_msec file, we don't update
the workq timers.  So that, if we move from a big poll time to a small
one, the small one won't take effect until the big one has timed out.

Here we provide a new module parameter set method to call out to the
update routine.  This brings the /sys/module/edac_core/parameters
functionality up to that provided by the /sys/drivers/system/edac/mc sysfs
module parameter files so that we can remove them or at least link to the
/sys/module files...

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/edac_mc_sysfs.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 021d1879514..7bb9c1532b9 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -44,6 +44,25 @@ int edac_mc_get_poll_msec(void)
 	return edac_mc_poll_msec;
 }
 
+static int edac_set_poll_msec(const char *val, struct kernel_param *kp)
+{
+	long l;
+	int ret;
+
+	if (!val)
+		return -EINVAL;
+
+	ret = strict_strtol(val, 0, &l);
+	if (ret == -EINVAL || ((int)l != l))
+		return -EINVAL;
+	*((int *)kp->arg) = l;
+
+	/* notify edac_mc engine to reset the poll period */
+	edac_mc_reset_delay_period(l);
+
+	return 0;
+}
+
 /* Parameter declarations for above */
 module_param(edac_mc_panic_on_ue, int, 0644);
 MODULE_PARM_DESC(edac_mc_panic_on_ue, "Panic on uncorrected error: 0=off 1=on");
@@ -53,7 +72,8 @@ MODULE_PARM_DESC(edac_mc_log_ue,
 module_param(edac_mc_log_ce, int, 0644);
 MODULE_PARM_DESC(edac_mc_log_ce,
 		 "Log correctable error to console: 0=off 1=on");
-module_param(edac_mc_poll_msec, int, 0644);
+module_param_call(edac_mc_poll_msec, edac_set_poll_msec, param_get_int,
+		  &edac_mc_poll_msec, 0644);
 MODULE_PARM_DESC(edac_mc_poll_msec, "Polling period in milliseconds");
 
 /*
-- 
cgit v1.2.3


From 327dafb1c61c9da7b95ac6cc7634a2340cc9509c Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:10 -0700
Subject: edac: core fix redundant sysfs controls to parameters

/sys/devices/system/edac/mc has a few files which are duplicated in
/sys/module/edac_core/parameters.  Now that all the functionality is
duplicated between these two locations, we remove the former kobject
attributes and update the documentation.

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/edac.txt       | 151 +++++++++++++++++++++----------------------
 drivers/edac/edac_mc_sysfs.c | 117 +--------------------------------
 2 files changed, 73 insertions(+), 195 deletions(-)

diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index a5c36842ece..ced52738800 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, this indicates a dual ranked
 set of DIMMs for channels 0 and 1.
 
 
-Within each of the 'mc','mcX' and 'csrowX' directories are several
+Within each of the 'mcX' and 'csrowX' directories are several
 EDAC control and attribute files.
 
-
-============================================================================
-DIRECTORY 'mc'
-
-In directory 'mc' are EDAC system overall control and attribute files:
-
-
-Panic on UE control file:
-
-	'edac_mc_panic_on_ue'
-
-	An uncorrectable error will cause a machine panic.  This is usually
-	desirable.  It is a bad idea to continue when an uncorrectable error
-	occurs - it is indeterminate what was uncorrected and the operating
-	system context might be so mangled that continuing will lead to further
-	corruption. If the kernel has MCE configured, then EDAC will never
-	notice the UE.
-
-	LOAD TIME: module/kernel parameter: panic_on_ue=[0|1]
-
-	RUN TIME:  echo "1" >/sys/devices/system/edac/mc/edac_mc_panic_on_ue
-
-
-Log UE control file:
-
-	'edac_mc_log_ue'
-
-	Generate kernel messages describing uncorrectable errors.  These errors
-	are reported through the system message log system.  UE statistics
-	will be accumulated even when UE logging is disabled.
-
-	LOAD TIME: module/kernel parameter: log_ue=[0|1]
-
-	RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ue
-
-
-Log CE control file:
-
-	'edac_mc_log_ce'
-
-	Generate kernel messages describing correctable errors.  These
-	errors are reported through the system message log system.
-	CE statistics will be accumulated even when CE logging is disabled.
-
-	LOAD TIME: module/kernel parameter: log_ce=[0|1]
-
-	RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ce
-
-
-Polling period control file:
-
-	'edac_mc_poll_msec'
-
-	The time period, in milliseconds, for polling for error information.
-	Too small a value wastes resources.  Too large a value might delay
-	necessary handling of errors and might loose valuable information for
-	locating the error.  1000 milliseconds (once each second) is the current
-	default. Systems which require all the bandwidth they can get, may
-	increase this.
-
-	LOAD TIME: module/kernel parameter: poll_msec=[0|1]
-
-	RUN TIME: echo "1000" >/sys/devices/system/edac/mc/edac_mc_poll_msec
-
-
 ============================================================================
 'mcX' DIRECTORIES
 
@@ -537,7 +472,6 @@ Channel 1 DIMM Label control file:
 	motherboard specific and determination of this information
 	must occur in userland at this time.
 
-
 ============================================================================
 SYSTEM LOGGING
 
@@ -570,7 +504,6 @@ error type, a notice of "no info" and then an optional,
 driver-specific error message.
 
 
-
 ============================================================================
 PCI Bus Parity Detection
 
@@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking control file:
 	echo "0" >/sys/devices/system/edac/pci/check_pci_parity
 
 
+Parity Count:
+
+	'pci_parity_count'
+
+	This attribute file will display the number of parity errors that
+	have been detected.
+
+
+============================================================================
+MODULE PARAMETERS
+
+Panic on UE control file:
+
+	'edac_mc_panic_on_ue'
+
+	An uncorrectable error will cause a machine panic.  This is usually
+	desirable.  It is a bad idea to continue when an uncorrectable error
+	occurs - it is indeterminate what was uncorrected and the operating
+	system context might be so mangled that continuing will lead to further
+	corruption. If the kernel has MCE configured, then EDAC will never
+	notice the UE.
+
+	LOAD TIME: module/kernel parameter: edac_mc_panic_on_ue=[0|1]
+
+	RUN TIME:  echo "1" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue
+
+
+Log UE control file:
+
+	'edac_mc_log_ue'
+
+	Generate kernel messages describing uncorrectable errors.  These errors
+	are reported through the system message log system.  UE statistics
+	will be accumulated even when UE logging is disabled.
+
+	LOAD TIME: module/kernel parameter: edac_mc_log_ue=[0|1]
+
+	RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ue
+
+
+Log CE control file:
+
+	'edac_mc_log_ce'
+
+	Generate kernel messages describing correctable errors.  These
+	errors are reported through the system message log system.
+	CE statistics will be accumulated even when CE logging is disabled.
+
+	LOAD TIME: module/kernel parameter: edac_mc_log_ce=[0|1]
+
+	RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ce
+
+
+Polling period control file:
+
+	'edac_mc_poll_msec'
+
+	The time period, in milliseconds, for polling for error information.
+	Too small a value wastes resources.  Too large a value might delay
+	necessary handling of errors and might loose valuable information for
+	locating the error.  1000 milliseconds (once each second) is the current
+	default. Systems which require all the bandwidth they can get, may
+	increase this.
+
+	LOAD TIME: module/kernel parameter: edac_mc_poll_msec=[0|1]
+
+	RUN TIME: echo "1000" > /sys/module/edac_core/parameters/edac_mc_poll_msec
+
 
 Panic on PCI PARITY Error:
 
@@ -614,21 +615,13 @@ Panic on PCI PARITY Error:
 	error has been detected.
 
 
-	module/kernel parameter: panic_on_pci_parity=[0|1]
+	module/kernel parameter: edac_panic_on_pci_pe=[0|1]
 
 	Enable:
-	echo "1" >/sys/devices/system/edac/pci/panic_on_pci_parity
+	echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
 
 	Disable:
-	echo "0" >/sys/devices/system/edac/pci/panic_on_pci_parity
-
-
-Parity Count:
-
-	'pci_parity_count'
-
-	This attribute file will display the number of parity errors that
-	have been detected.
+	echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
 
 
 
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 7bb9c1532b9..cbe1a17e42f 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -123,16 +123,6 @@ static const char *edac_caps[] = {
 
 
 
-/*
- * /sys/devices/system/edac/mc;
- *	data structures and methods
- */
-static ssize_t memctrl_int_show(void *ptr, char *buffer)
-{
-	int *value = (int *)ptr;
-	return sprintf(buffer, "%u\n", *value);
-}
-
 static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
 {
 	int *value = (int *)ptr;
@@ -143,23 +133,6 @@ static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
 	return count;
 }
 
-/*
- * mc poll_msec time value
- */
-static ssize_t poll_msec_int_store(void *ptr, const char *buffer, size_t count)
-{
-	int *value = (int *)ptr;
-
-	if (isdigit(*buffer)) {
-		*value = simple_strtoul(buffer, NULL, 0);
-
-		/* notify edac_mc engine to reset the poll period */
-		edac_mc_reset_delay_period(*value);
-	}
-
-	return count;
-}
-
 
 /* EDAC sysfs CSROW data structures and methods
  */
@@ -669,98 +642,10 @@ static struct kobj_type ktype_mci = {
 	.default_attrs = (struct attribute **)mci_attr,
 };
 
-/* show/store, tables, etc for the MC kset */
-
-
-struct memctrl_dev_attribute {
-	struct attribute attr;
-	void *value;
-	 ssize_t(*show) (void *, char *);
-	 ssize_t(*store) (void *, const char *, size_t);
-};
-
-/* Set of show/store abstract level functions for memory control object */
-static ssize_t memctrl_dev_show(struct kobject *kobj,
-				struct attribute *attr, char *buffer)
-{
-	struct memctrl_dev_attribute *memctrl_dev;
-	memctrl_dev = (struct memctrl_dev_attribute *)attr;
-
-	if (memctrl_dev->show)
-		return memctrl_dev->show(memctrl_dev->value, buffer);
-
-	return -EIO;
-}
-
-static ssize_t memctrl_dev_store(struct kobject *kobj, struct attribute *attr,
-				 const char *buffer, size_t count)
-{
-	struct memctrl_dev_attribute *memctrl_dev;
-	memctrl_dev = (struct memctrl_dev_attribute *)attr;
-
-	if (memctrl_dev->store)
-		return memctrl_dev->store(memctrl_dev->value, buffer, count);
-
-	return -EIO;
-}
-
-static struct sysfs_ops memctrlfs_ops = {
-	.show = memctrl_dev_show,
-	.store = memctrl_dev_store
-};
-
-#define MEMCTRL_ATTR(_name, _mode, _show, _store)			\
-static struct memctrl_dev_attribute attr_##_name = {			\
-	.attr = {.name = __stringify(_name), .mode = _mode },	\
-	.value  = &_name,					\
-	.show   = _show,					\
-	.store  = _store,					\
-};
-
-#define MEMCTRL_STRING_ATTR(_name, _data, _mode, _show, _store)	\
-static struct memctrl_dev_attribute attr_##_name = {			\
-	.attr = {.name = __stringify(_name), .mode = _mode },	\
-	.value  = _data,					\
-	.show   = _show,					\
-	.store  = _store,					\
-};
-
-/* csrow<id> control files */
-MEMCTRL_ATTR(edac_mc_panic_on_ue,
-	S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
-
-MEMCTRL_ATTR(edac_mc_log_ue,
-	S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
-
-MEMCTRL_ATTR(edac_mc_log_ce,
-	S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store);
-
-MEMCTRL_ATTR(edac_mc_poll_msec,
-	S_IRUGO | S_IWUSR, memctrl_int_show, poll_msec_int_store);
-
-/* Base Attributes of the memory ECC object */
-static struct memctrl_dev_attribute *memctrl_attr[] = {
-	&attr_edac_mc_panic_on_ue,
-	&attr_edac_mc_log_ue,
-	&attr_edac_mc_log_ce,
-	&attr_edac_mc_poll_msec,
-	NULL,
-};
-
-
-/* the ktype for the mc_kset internal kobj */
-static struct kobj_type ktype_mc_set_attribs = {
-	.sysfs_ops = &memctrlfs_ops,
-	.default_attrs = (struct attribute **)memctrl_attr,
-};
-
 /* EDAC memory controller sysfs kset:
  *	/sys/devices/system/edac/mc
  */
-static struct kset mc_kset = {
-	.kobj = {.ktype = &ktype_mc_set_attribs },
-};
-
+static struct kset mc_kset;
 
 /*
  * edac_mc_register_sysfs_main_kobj
-- 
cgit v1.2.3


From f9fc82adca43d38a1b79128d80750bd361e15abe Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:11 -0700
Subject: edac: core fix static to dynamic kset

Static kobjects and ksets are not supported in Linux kernel.  Convert the
mc_kset from static to dynamic.  This patch depends on my previous patch
to remove the module parameter attributes from mc...

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/edac_mc_sysfs.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index cbe1a17e42f..479492819db 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -645,7 +645,7 @@ static struct kobj_type ktype_mci = {
 /* EDAC memory controller sysfs kset:
  *	/sys/devices/system/edac/mc
  */
-static struct kset mc_kset;
+static struct kset *mc_kset;
 
 /*
  * edac_mc_register_sysfs_main_kobj
@@ -676,7 +676,7 @@ int edac_mc_register_sysfs_main_kobj(struct mem_ctl_info *mci)
 	}
 
 	/* this instance become part of the mc_kset */
-	kobj_mci->kset = &mc_kset;
+	kobj_mci->kset = mc_kset;
 
 	/* register the mc<id> kobject to the mc_kset */
 	err = kobject_init_and_add(kobj_mci, &ktype_mci, NULL,
@@ -906,12 +906,9 @@ int edac_sysfs_setup_mc_kset(void)
 	}
 
 	/* Init the MC's kobject */
-	kobject_set_name(&mc_kset.kobj, "mc");
-	mc_kset.kobj.parent = &edac_class->kset.kobj;
-
-	/* register the mc_kset */
-	err = kset_register(&mc_kset);
-	if (err) {
+	mc_kset = kset_create_and_add("mc", NULL, &edac_class->kset.kobj);
+	if (!mc_kset) {
+		err = -ENOMEM;
 		debugf1("%s() Failed to register '.../edac/mc'\n", __func__);
 		goto fail_out;
 	}
@@ -933,6 +930,6 @@ fail_out:
  */
 void edac_sysfs_teardown_mc_kset(void)
 {
-	kset_unregister(&mc_kset);
+	kset_unregister(mc_kset);
 }
 
-- 
cgit v1.2.3


From 124682c78563e10ba8b2ecd21b0f1098903b7808 Mon Sep 17 00:00:00 2001
From: Arthur Jones <ajones@riverbed.com>
Date: Fri, 25 Jul 2008 01:49:12 -0700
Subject: edac: core fix added newline to sysfs dimm labels

The channel DIMM label does not seem to be used much in the edac code.
However, where it is used (in the core code), it is assumed to not have a
newline embedded.  This leaves the sysfs file newline free which looks
funny when cat'ing it.  Here we just add the trailing newline to the sysfs
chX_dimm_label output...

[Doug Thompson note: the DIMM label is one of the primary uses of EDAC.
User space daemon scripts, edac-utils@sourceforge, populate the DIMM label
fields, via /sys/devices/system/edac attributes, with the silk screen
labels of the motherboard in use.  dmidecode access BIOS tables, but BIOS
tables are well known to be incorrect and useless in these respects.
edac-utils will strip off any newlines before its use of the output, when
displaying DIMM slot silk screen labels.

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/edac_mc_sysfs.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 479492819db..ad218fe4942 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -178,7 +178,11 @@ static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data,
 static ssize_t channel_dimm_label_show(struct csrow_info *csrow,
 				char *data, int channel)
 {
-	return snprintf(data, EDAC_MC_LABEL_LEN, "%s",
+	/* if field has not been initialized, there is nothing to send */
+	if (!csrow->channels[channel].label[0])
+		return 0;
+
+	return snprintf(data, EDAC_MC_LABEL_LEN, "%s\n",
 			csrow->channels[channel].label);
 }
 
-- 
cgit v1.2.3


From 10d33e9c36827e5371479e55ef4089e000af2638 Mon Sep 17 00:00:00 2001
From: Doug Thompson <dougthompson@xmission.com>
Date: Fri, 25 Jul 2008 01:49:12 -0700
Subject: edac: e752x fix too loud on nonmemory errors

This module harvests more than just memory errors, it also harvests
various bus and dma errors that the Chipset detects.  Previously, it would
report all such errors, which would cause output to be TOO loud.

This patches therefore adds a parameter which is used to turn off
NON-MEMORY error reports by default.  Or the reporting can be enabled via
the parameter

Also did code style cleanup: less than 80 characters per line rule

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/e752x_edac.c | 59 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 42 insertions(+), 17 deletions(-)

diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index c94a0eb492c..facfdb1fa71 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -28,6 +28,7 @@
 #define E752X_REVISION	" Ver: 2.0.2 " __DATE__
 #define EDAC_MOD_STR	"e752x_edac"
 
+static int report_non_memory_errors;
 static int force_function_unhide;
 static int sysbus_parity = -1;
 
@@ -117,7 +118,7 @@ static struct edac_pci_ctl_info *e752x_pci;
 #define E752X_BUF_FERR		0x70	/* Memory buffer first error reg (8b) */
 #define E752X_BUF_NERR		0x72	/* Memory buffer next error reg (8b) */
 #define E752X_BUF_ERRMASK	0x74	/* Memory buffer error mask reg (8b) */
-#define E752X_BUF_SMICMD	0x7A	/* Memory buffer SMI command reg (8b) */
+#define E752X_BUF_SMICMD	0x7A	/* Memory buffer SMI cmd reg (8b) */
 #define E752X_DRAM_FERR		0x80	/* DRAM first error register (16b) */
 #define E752X_DRAM_NERR		0x82	/* DRAM next error register (16b) */
 #define E752X_DRAM_ERRMASK	0x84	/* DRAM error mask register (8b) */
@@ -127,7 +128,7 @@ static struct edac_pci_ctl_info *e752x_pci;
 					/*     error address register (32b) */
 					/*
 					 * 31    Reserved
-					 * 30:2  CE address (64 byte block 34:6)
+					 * 30:2  CE address (64 byte block 34:6
 					 * 1     Reserved
 					 * 0     HiLoCS
 					 */
@@ -147,11 +148,11 @@ static struct edac_pci_ctl_info *e752x_pci;
 					 * 1     Reserved
 					 * 0     HiLoCS
 					 */
-#define E752X_DRAM_SCRB_ADD	0xA8	/* DRAM first uncorrectable scrub memory */
+#define E752X_DRAM_SCRB_ADD	0xA8	/* DRAM 1st uncorrectable scrub mem */
 					/*     error address register (32b) */
 					/*
 					 * 31    Reserved
-					 * 30:2  CE address (64 byte block 34:6)
+					 * 30:2  CE address (64 byte block 34:6
 					 * 1     Reserved
 					 * 0     HiLoCS
 					 */
@@ -394,9 +395,12 @@ static void do_process_ded_retry(struct mem_ctl_info *mci, u16 error,
 	struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
 
 	error_1b = retry_add;
-	page = error_1b >> (PAGE_SHIFT - 4);	/* convert the addr to 4k page */
-	row = pvt->mc_symmetric ? ((page >> 1) & 3) :	/* chip select are bits 14 & 13 */
+	page = error_1b >> (PAGE_SHIFT - 4);  /* convert the addr to 4k page */
+
+	/* chip select are bits 14 & 13 */
+	row = pvt->mc_symmetric ? ((page >> 1) & 3) :
 		edac_mc_find_csrow_by_page(mci, page);
+
 	e752x_mc_printk(mci, KERN_WARNING,
 			"CE page 0x%lx, row %d : Memory read retry\n",
 			(long unsigned int)page, row);
@@ -422,12 +426,21 @@ static inline void process_threshold_ce(struct mem_ctl_info *mci, u16 error,
 }
 
 static char *global_message[11] = {
-	"PCI Express C1", "PCI Express C", "PCI Express B1",
-	"PCI Express B", "PCI Express A1", "PCI Express A",
-	"DMA Controler", "HUB or NS Interface", "System Bus",
-	"DRAM Controler", "Internal Buffer"
+	"PCI Express C1",
+	"PCI Express C",
+	"PCI Express B1",
+	"PCI Express B",
+	"PCI Express A1",
+	"PCI Express A",
+	"DMA Controller",
+	"HUB or NS Interface",
+	"System Bus",
+	"DRAM Controller",  /* 9th entry */
+	"Internal Buffer"
 };
 
+#define DRAM_ENTRY	9
+
 static char *fatal_message[2] = { "Non-Fatal ", "Fatal " };
 
 static void do_global_error(int fatal, u32 errors)
@@ -435,9 +448,16 @@ static void do_global_error(int fatal, u32 errors)
 	int i;
 
 	for (i = 0; i < 11; i++) {
-		if (errors & (1 << i))
-			e752x_printk(KERN_WARNING, "%sError %s\n",
-				fatal_message[fatal], global_message[i]);
+		if (errors & (1 << i)) {
+			/* If the error is from DRAM Controller OR
+			 * we are to report ALL errors, then
+			 * report the error
+			 */
+			if ((i == DRAM_ENTRY) || report_non_memory_errors)
+				e752x_printk(KERN_WARNING, "%sError %s\n",
+					fatal_message[fatal],
+					global_message[i]);
+		}
 	}
 }
 
@@ -1021,7 +1041,7 @@ static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
 	struct pci_dev *dev;
 
 	pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
-					pvt->dev_info->err_dev, pvt->bridge_ck);
+				pvt->dev_info->err_dev, pvt->bridge_ck);
 
 	if (pvt->bridge_ck == NULL)
 		pvt->bridge_ck = pci_scan_single_device(pdev->bus,
@@ -1034,8 +1054,9 @@ static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
 		return 1;
 	}
 
-	dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
-			NULL);
+	dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				e752x_devs[dev_idx].ctl_dev,
+				NULL);
 
 	if (dev == NULL)
 		goto fail;
@@ -1316,7 +1337,8 @@ MODULE_DESCRIPTION("MC support for Intel e752x/3100 memory controllers");
 
 module_param(force_function_unhide, int, 0444);
 MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
-		 " 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
+		 " 1=force unhide and hope BIOS doesn't fight driver for "
+		"Dev0:Fun1 access");
 
 module_param(edac_op_state, int, 0444);
 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
@@ -1324,3 +1346,6 @@ MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
 module_param(sysbus_parity, int, 0444);
 MODULE_PARM_DESC(sysbus_parity, "0=disable system bus parity checking,"
 		" 1=enable system bus parity checking, default=auto-detect");
+module_param(report_non_memory_errors, int, 0644);
+MODULE_PARM_DESC(report_non_memory_errors, "0=disable non-memory error "
+		"reporting, 1=enable non-memory error reporting");
-- 
cgit v1.2.3


From 596d3941035d4d4b484c820f10f57fd4816c6615 Mon Sep 17 00:00:00 2001
From: Dave Jiang <djiang@mvista.com>
Date: Fri, 25 Jul 2008 01:49:13 -0700
Subject: edac: mv64x60 fix get_property

Update get_property() call to use of_get_property() in order to fix compile

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/mv64x60_edac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/edac/mv64x60_edac.c b/drivers/edac/mv64x60_edac.c
index bf071f140a0..de69163ff5b 100644
--- a/drivers/edac/mv64x60_edac.c
+++ b/drivers/edac/mv64x60_edac.c
@@ -612,7 +612,7 @@ static void get_total_mem(struct mv64x60_mc_pdata *pdata)
 	if (!np)
 		return;
 
-	reg = get_property(np, "reg", NULL);
+	reg = of_get_property(np, "reg", NULL);
 
 	pdata->total_mem = reg[1];
 }
-- 
cgit v1.2.3


From fcb19171d196172a4f57e056f7a60e6d1e2e8c85 Mon Sep 17 00:00:00 2001
From: Dave Jiang <djiang@mvista.com>
Date: Fri, 25 Jul 2008 01:49:14 -0700
Subject: edac: mv64x60 add pci fixup

Fixup of missing bit 0 on 64360 PCIx_ERR_MASK and errata FEr-#11 and
FEr-#16 for the 64460.  Bit 0 must remain 0.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/mv64x60_edac.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/edac/mv64x60_edac.c b/drivers/edac/mv64x60_edac.c
index de69163ff5b..083ce8d0c63 100644
--- a/drivers/edac/mv64x60_edac.c
+++ b/drivers/edac/mv64x60_edac.c
@@ -71,6 +71,35 @@ static irqreturn_t mv64x60_pci_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of
+ * errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as
+ * well.  IOW, don't set bit 0.
+ */
+
+/* Erratum FEr PCI-#16: clear bit 0 of PCI SERRn Mask reg. */
+static int __init mv64x60_pci_fixup(struct platform_device *pdev)
+{
+	struct resource *r;
+	void __iomem *pci_serr;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!r) {
+		printk(KERN_ERR "%s: Unable to get resource for "
+		       "PCI err regs\n", __func__);
+		return -ENOENT;
+	}
+
+	pci_serr = ioremap(r->start, r->end - r->start + 1);
+	if (!pci_serr)
+		return -ENOMEM;
+
+	out_le32(pci_serr, in_le32(pci_serr) & ~0x1);
+	iounmap(pci_serr);
+
+	return 0;
+}
+
 static int __devinit mv64x60_pci_err_probe(struct platform_device *pdev)
 {
 	struct edac_pci_ctl_info *pci;
@@ -128,6 +157,12 @@ static int __devinit mv64x60_pci_err_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	res = mv64x60_pci_fixup(pdev);
+	if (res < 0) {
+		printk(KERN_ERR "%s: PCI fixup failed\n", __func__);
+		goto err;
+	}
+
 	out_le32(pdata->pci_vbase + MV64X60_PCI_ERROR_CAUSE, 0);
 	out_le32(pdata->pci_vbase + MV64X60_PCI_ERROR_MASK, 0);
 	out_le32(pdata->pci_vbase + MV64X60_PCI_ERROR_MASK,
-- 
cgit v1.2.3


From f87bd330edf06fd49b3fbc368d90fb180375f2a2 Mon Sep 17 00:00:00 2001
From: Dave Jiang <djiang@mvista.com>
Date: Fri, 25 Jul 2008 01:49:14 -0700
Subject: edac: mpc85xx fix pci ofdev 2nd pass

Convert PCI err device from platform to open firmware of_dev to comply
with powerpc schemes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/mpc85xx_edac.c | 67 +++++++++++++++++++++++++++++----------------
 1 file changed, 43 insertions(+), 24 deletions(-)

diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index d49361bfe67..2265d9ca153 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -195,14 +195,15 @@ static irqreturn_t mpc85xx_pci_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __devinit mpc85xx_pci_err_probe(struct platform_device *pdev)
+static int __devinit mpc85xx_pci_err_probe(struct of_device *op,
+					   const struct of_device_id *match)
 {
 	struct edac_pci_ctl_info *pci;
 	struct mpc85xx_pci_pdata *pdata;
-	struct resource *r;
+	struct resource r;
 	int res = 0;
 
-	if (!devres_open_group(&pdev->dev, mpc85xx_pci_err_probe, GFP_KERNEL))
+	if (!devres_open_group(&op->dev, mpc85xx_pci_err_probe, GFP_KERNEL))
 		return -ENOMEM;
 
 	pci = edac_pci_alloc_ctl_info(sizeof(*pdata), "mpc85xx_pci_err");
@@ -212,34 +213,37 @@ static int __devinit mpc85xx_pci_err_probe(struct platform_device *pdev)
 	pdata = pci->pvt_info;
 	pdata->name = "mpc85xx_pci_err";
 	pdata->irq = NO_IRQ;
-	platform_set_drvdata(pdev, pci);
-	pci->dev = &pdev->dev;
+	dev_set_drvdata(&op->dev, pci);
+	pci->dev = &op->dev;
 	pci->mod_name = EDAC_MOD_STR;
 	pci->ctl_name = pdata->name;
-	pci->dev_name = pdev->dev.bus_id;
+	pci->dev_name = op->dev.bus_id;
 
 	if (edac_op_state == EDAC_OPSTATE_POLL)
 		pci->edac_check = mpc85xx_pci_check;
 
 	pdata->edac_idx = edac_pci_idx++;
 
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
+	res = of_address_to_resource(op->node, 0, &r);
+	if (res) {
 		printk(KERN_ERR "%s: Unable to get resource for "
 		       "PCI err regs\n", __func__);
 		goto err;
 	}
 
-	if (!devm_request_mem_region(&pdev->dev, r->start,
-				     r->end - r->start + 1, pdata->name)) {
+	/* we only need the error registers */
+	r.start += 0xe00;
+
+	if (!devm_request_mem_region(&op->dev, r.start,
+					r.end - r.start + 1, pdata->name)) {
 		printk(KERN_ERR "%s: Error while requesting mem region\n",
 		       __func__);
 		res = -EBUSY;
 		goto err;
 	}
 
-	pdata->pci_vbase = devm_ioremap(&pdev->dev, r->start,
-					r->end - r->start + 1);
+	pdata->pci_vbase = devm_ioremap(&op->dev, r.start,
+					r.end - r.start + 1);
 	if (!pdata->pci_vbase) {
 		printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__);
 		res = -ENOMEM;
@@ -266,14 +270,15 @@ static int __devinit mpc85xx_pci_err_probe(struct platform_device *pdev)
 	}
 
 	if (edac_op_state == EDAC_OPSTATE_INT) {
-		pdata->irq = platform_get_irq(pdev, 0);
-		res = devm_request_irq(&pdev->dev, pdata->irq,
+		pdata->irq = irq_of_parse_and_map(op->node, 0);
+		res = devm_request_irq(&op->dev, pdata->irq,
 				       mpc85xx_pci_isr, IRQF_DISABLED,
 				       "[EDAC] PCI err", pci);
 		if (res < 0) {
 			printk(KERN_ERR
 			       "%s: Unable to requiest irq %d for "
 			       "MPC85xx PCI err\n", __func__, pdata->irq);
+			irq_dispose_mapping(pdata->irq);
 			res = -ENODEV;
 			goto err2;
 		}
@@ -282,23 +287,23 @@ static int __devinit mpc85xx_pci_err_probe(struct platform_device *pdev)
 		       pdata->irq);
 	}
 
-	devres_remove_group(&pdev->dev, mpc85xx_pci_err_probe);
+	devres_remove_group(&op->dev, mpc85xx_pci_err_probe);
 	debugf3("%s(): success\n", __func__);
 	printk(KERN_INFO EDAC_MOD_STR " PCI err registered\n");
 
 	return 0;
 
 err2:
-	edac_pci_del_device(&pdev->dev);
+	edac_pci_del_device(&op->dev);
 err:
 	edac_pci_free_ctl_info(pci);
-	devres_release_group(&pdev->dev, mpc85xx_pci_err_probe);
+	devres_release_group(&op->dev, mpc85xx_pci_err_probe);
 	return res;
 }
 
-static int mpc85xx_pci_err_remove(struct platform_device *pdev)
+static int mpc85xx_pci_err_remove(struct of_device *op)
 {
-	struct edac_pci_ctl_info *pci = platform_get_drvdata(pdev);
+	struct edac_pci_ctl_info *pci = dev_get_drvdata(&op->dev);
 	struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
 
 	debugf0("%s()\n", __func__);
@@ -318,12 +323,26 @@ static int mpc85xx_pci_err_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver mpc85xx_pci_err_driver = {
+static struct of_device_id mpc85xx_pci_err_of_match[] = {
+	{
+	 .compatible = "fsl,mpc8540-pcix",
+	 },
+	{
+	 .compatible = "fsl,mpc8540-pci",
+	},
+	{},
+};
+
+static struct of_platform_driver mpc85xx_pci_err_driver = {
+	.owner = THIS_MODULE,
+	.name = "mpc85xx_pci_err",
+	.match_table = mpc85xx_pci_err_of_match,
 	.probe = mpc85xx_pci_err_probe,
 	.remove = __devexit_p(mpc85xx_pci_err_remove),
 	.driver = {
-		.name = "mpc85xx_pci_err",
-	}
+		   .name = "mpc85xx_pci_err",
+		   .owner = THIS_MODULE,
+		   },
 };
 
 #endif				/* CONFIG_PCI */
@@ -1002,7 +1021,7 @@ static int __init mpc85xx_mc_init(void)
 		printk(KERN_WARNING EDAC_MOD_STR "L2 fails to register\n");
 
 #ifdef CONFIG_PCI
-	res = platform_driver_register(&mpc85xx_pci_err_driver);
+	res = of_register_platform_driver(&mpc85xx_pci_err_driver);
 	if (res)
 		printk(KERN_WARNING EDAC_MOD_STR "PCI fails to register\n");
 #endif
@@ -1025,7 +1044,7 @@ static void __exit mpc85xx_mc_exit(void)
 {
 	mtspr(SPRN_HID1, orig_hid1);
 #ifdef CONFIG_PCI
-	platform_driver_unregister(&mpc85xx_pci_err_driver);
+	of_unregister_platform_driver(&mpc85xx_pci_err_driver);
 #endif
 	of_unregister_platform_driver(&mpc85xx_l2_err_driver);
 	of_unregister_platform_driver(&mpc85xx_mc_err_driver);
-- 
cgit v1.2.3


From 93082f0b15841b8926c38ef224d0e6f720000635 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 25 Jul 2008 10:56:36 -0700
Subject: Fix ahci driver 'flags' type

The new type checking of the flags arguments to irqsave and friends
(commit 3f307891ce0e7b0438c432af1aacd656a092ff45) pointed out this thing
with a big nice warning.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/ata/ahci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index dc7596f028b..ef3e5522e1a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1273,7 +1273,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
 	u32 em_ctl;
 	u32 message[] = {0, 0};
-	unsigned int flags;
+	unsigned long flags;
 	int pmp;
 	struct ahci_em_priv *emp;
 
-- 
cgit v1.2.3


From c0220d686b926a5865a2032c805015758bfdda69 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Tue, 22 Jul 2008 21:35:47 +0200
Subject: firewire: avoid memleak after phy config transmit failure

Use only statically allocated data for PHY config packet transmission.
With the previous incarnation, some data wouldn't be freed if the packet
transmit callback was never called.

A theoretical drawback now is that, in PCs with more than one card,
card A may complete() for a waiter on card B.  But this is highly
unlikely and its impact not serious.  Bus manager B may reset bus B
before the PHY config went out, but the next phy config on B should be
fine.  However, with a timeout of 100ms, this situation is close to
impossible.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/fw-transaction.c | 58 ++++++++++++++-------------------------
 1 file changed, 21 insertions(+), 37 deletions(-)

diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index 861dd60de7d..e5d1a0b64fc 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kref.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
@@ -295,58 +296,41 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
 }
 EXPORT_SYMBOL(fw_send_request);
 
-struct fw_phy_packet {
-	struct fw_packet packet;
-	struct completion done;
-	struct kref kref;
-};
-
-static void phy_packet_release(struct kref *kref)
-{
-	struct fw_phy_packet *p =
-			container_of(kref, struct fw_phy_packet, kref);
-	kfree(p);
-}
+static DEFINE_MUTEX(phy_config_mutex);
+static DECLARE_COMPLETION(phy_config_done);
 
 static void transmit_phy_packet_callback(struct fw_packet *packet,
 					 struct fw_card *card, int status)
 {
-	struct fw_phy_packet *p =
-			container_of(packet, struct fw_phy_packet, packet);
-
-	complete(&p->done);
-	kref_put(&p->kref, phy_packet_release);
+	complete(&phy_config_done);
 }
 
+static struct fw_packet phy_config_packet = {
+	.header_length	= 8,
+	.payload_length	= 0,
+	.speed		= SCODE_100,
+	.callback	= transmit_phy_packet_callback,
+};
+
 void fw_send_phy_config(struct fw_card *card,
 			int node_id, int generation, int gap_count)
 {
-	struct fw_phy_packet *p;
 	long timeout = DIV_ROUND_UP(HZ, 10);
 	u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
 		   PHY_CONFIG_ROOT_ID(node_id) |
 		   PHY_CONFIG_GAP_COUNT(gap_count);
 
-	p = kmalloc(sizeof(*p), GFP_KERNEL);
-	if (p == NULL)
-		return;
+	mutex_lock(&phy_config_mutex);
+
+	phy_config_packet.header[0] = data;
+	phy_config_packet.header[1] = ~data;
+	phy_config_packet.generation = generation;
+	INIT_COMPLETION(phy_config_done);
+
+	card->driver->send_request(card, &phy_config_packet);
+	wait_for_completion_timeout(&phy_config_done, timeout);
 
-	p->packet.header[0] = data;
-	p->packet.header[1] = ~data;
-	p->packet.header_length = 8;
-	p->packet.payload_length = 0;
-	p->packet.speed = SCODE_100;
-	p->packet.generation = generation;
-	p->packet.callback = transmit_phy_packet_callback;
-	init_completion(&p->done);
-	kref_set(&p->kref, 2);
-
-	card->driver->send_request(card, &p->packet);
-	timeout = wait_for_completion_timeout(&p->done, timeout);
-	kref_put(&p->kref, phy_packet_release);
-
-	/* will leak p if the callback is never executed */
-	WARN_ON(timeout == 0);
+	mutex_unlock(&phy_config_mutex);
 }
 
 void fw_flush_transactions(struct fw_card *card)
-- 
cgit v1.2.3


From f05e21b39f7dddcebab03ff329fef5783fea58d4 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Fri, 25 Jul 2008 16:24:19 +0200
Subject: firewire: state userland requirements in Kconfig help

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/Kconfig | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index 76f26710fc1..fa6d6abefd4 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -16,8 +16,13 @@ config FIREWIRE
 	  enable the new stack.
 
 	  To compile this driver as a module, say M here: the module will be
-	  called firewire-core.  It functionally replaces ieee1394, raw1394,
-	  and video1394.
+	  called firewire-core.
+
+	  This module functionally replaces ieee1394, raw1394, and video1394.
+	  To access it from application programs, you generally need at least
+	  libraw1394 version 2.  IIDC/DCAM applications also need libdc1394
+	  version 2.  No libraries are required to access storage devices
+	  through the firewire-sbp2 driver.
 
 config FIREWIRE_OHCI
 	tristate "OHCI-1394 controllers"
-- 
cgit v1.2.3


From 44463f7dd6c8039904333e4374e5c6e9ad83006f Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Fri, 25 Jul 2008 14:17:19 -0400
Subject: firmware: create firmware binaries during 'make modules'.

This means that we no longer need write access to the source tree while
doing 'make modules_install'.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 Makefile                |  1 +
 scripts/Makefile.fwinst | 10 ++++++----
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/Makefile b/Makefile
index 4bcd1cf90cb..3cad7db5eba 100644
--- a/Makefile
+++ b/Makefile
@@ -1061,6 +1061,7 @@ modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
 	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
 	@echo '  Building modules, stage 2.';
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
 
 
 # Target to prepare building external modules
diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst
index c972c0f54ce..f63a663de15 100644
--- a/scripts/Makefile.fwinst
+++ b/scripts/Makefile.fwinst
@@ -17,14 +17,15 @@ include $(srctree)/$(obj)/Makefile
 
 include scripts/Makefile.host
 
-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-m))
-
+mod-fw := $(fw-shipped-m)
 # If CONFIG_FIRMWARE_IN_KERNEL isn't set, then install the 
 # firmware for in-kernel drivers too.
 ifndef CONFIG_FIRMWARE_IN_KERNEL
-mod-fw += $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-y))
+mod-fw += $(fw-shipped-y)
 endif
 
+installed-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(mod-fw))
+
 installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all))
 installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/.
 
@@ -49,7 +50,8 @@ PHONY +=  __fw_install __fw_modinst FORCE
 .PHONY: $(PHONY)
 
 __fw_install: $(installed-fw)
-__fw_modinst: $(mod-fw)
+__fw_modinst: $(installed-mod-fw)
+__fw_modbuild: $(addprefix $(obj)/,$(mod-fw))
 
 FORCE:
 
-- 
cgit v1.2.3


From e44d1b2998d62a1f2f4d7eb17b56ba396535509f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 25 Jul 2008 12:57:41 +0200
Subject: mm/hugetlb.c: fix build failure with !CONFIG_SYSCTL

on !CONFIG_SYSCTL on x86 with latest -git i get:

     mm/hugetlb.c: In function 'decrement_hugepage_resv_vma':
     mm/hugetlb.c:83: error: 'reserve' undeclared (first use in this function)
     mm/hugetlb.c:83: error: (Each undeclared identifier is reported only once
     mm/hugetlb.c:83: error: for each function it appears in.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 41341c41419..a8bf4ab01f8 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1026,6 +1026,17 @@ static void __init report_hugepages(void)
 	}
 }
 
+static unsigned int cpuset_mems_nr(unsigned int *array)
+{
+	int node;
+	unsigned int nr = 0;
+
+	for_each_node_mask(node, cpuset_current_mems_allowed)
+		nr += array[node];
+
+	return nr;
+}
+
 #ifdef CONFIG_SYSCTL
 #ifdef CONFIG_HIGHMEM
 static void try_to_free_low(struct hstate *h, unsigned long count)
@@ -1375,17 +1386,6 @@ static int __init hugetlb_default_setup(char *s)
 }
 __setup("default_hugepagesz=", hugetlb_default_setup);
 
-static unsigned int cpuset_mems_nr(unsigned int *array)
-{
-	int node;
-	unsigned int nr = 0;
-
-	for_each_node_mask(node, cpuset_current_mems_allowed)
-		nr += array[node];
-
-	return nr;
-}
-
 int hugetlb_sysctl_handler(struct ctl_table *table, int write,
 			   struct file *file, void __user *buffer,
 			   size_t *length, loff_t *ppos)
-- 
cgit v1.2.3


From 9b81361631bbb1d85c99ddec677d42afe516737b Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 25 Jul 2008 13:02:37 +0200
Subject: signalfd: fix undefined reference to `compat_sys_signalfd4' when
 !CONFIG_SIGNALFD

fix:

arch/x86/ia32/built-in.o: In function `ia32_sys_call_table':
(.rodata+0xa38): undefined reference to `compat_sys_signalfd4'

on !CONFIG_SIGNALFD.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sys_ni.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 55eca1594da..08d6e1bb99a 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -160,6 +160,7 @@ cond_syscall(sys_ioprio_get);
 cond_syscall(sys_signalfd);
 cond_syscall(sys_signalfd4);
 cond_syscall(compat_sys_signalfd);
+cond_syscall(compat_sys_signalfd4);
 cond_syscall(sys_timerfd_create);
 cond_syscall(sys_timerfd_settime);
 cond_syscall(sys_timerfd_gettime);
-- 
cgit v1.2.3


From 7dcf2a9fced59e58e4694cdcf15850c01fdba89b Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 1 Jul 2008 19:27:16 +0300
Subject: remove dummy asm/kvm.h files

This patch removes the dummy asm/kvm.h files on architectures not (yet)
supporting KVM and uses the same conditional headers installation as
already used for a.out.h .

Also removed are superfluous install rules in the s390 and x86 Kbuild
files (they are already in Kbuild.asm).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 include/asm-alpha/kvm.h        | 6 ------
 include/asm-arm/kvm.h          | 6 ------
 include/asm-avr32/kvm.h        | 6 ------
 include/asm-blackfin/kvm.h     | 6 ------
 include/asm-cris/kvm.h         | 6 ------
 include/asm-frv/kvm.h          | 6 ------
 include/asm-generic/Kbuild.asm | 2 ++
 include/asm-h8300/kvm.h        | 6 ------
 include/asm-m32r/kvm.h         | 6 ------
 include/asm-m68k/kvm.h         | 6 ------
 include/asm-m68knommu/kvm.h    | 6 ------
 include/asm-mips/kvm.h         | 6 ------
 include/asm-mn10300/kvm.h      | 6 ------
 include/asm-parisc/kvm.h       | 6 ------
 include/asm-s390/Kbuild        | 1 -
 include/asm-sh/kvm.h           | 6 ------
 include/asm-sparc/kvm.h        | 6 ------
 include/asm-sparc64/kvm.h      | 1 -
 include/asm-um/kvm.h           | 6 ------
 include/asm-x86/Kbuild         | 1 -
 include/asm-xtensa/kvm.h       | 6 ------
 include/linux/Kbuild           | 2 ++
 22 files changed, 4 insertions(+), 105 deletions(-)
 delete mode 100644 include/asm-alpha/kvm.h
 delete mode 100644 include/asm-arm/kvm.h
 delete mode 100644 include/asm-avr32/kvm.h
 delete mode 100644 include/asm-blackfin/kvm.h
 delete mode 100644 include/asm-cris/kvm.h
 delete mode 100644 include/asm-frv/kvm.h
 delete mode 100644 include/asm-h8300/kvm.h
 delete mode 100644 include/asm-m32r/kvm.h
 delete mode 100644 include/asm-m68k/kvm.h
 delete mode 100644 include/asm-m68knommu/kvm.h
 delete mode 100644 include/asm-mips/kvm.h
 delete mode 100644 include/asm-mn10300/kvm.h
 delete mode 100644 include/asm-parisc/kvm.h
 delete mode 100644 include/asm-sh/kvm.h
 delete mode 100644 include/asm-sparc/kvm.h
 delete mode 100644 include/asm-sparc64/kvm.h
 delete mode 100644 include/asm-um/kvm.h
 delete mode 100644 include/asm-xtensa/kvm.h

diff --git a/include/asm-alpha/kvm.h b/include/asm-alpha/kvm.h
deleted file mode 100644
index b9daec42968..00000000000
--- a/include/asm-alpha/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_ALPHA_H
-#define __LINUX_KVM_ALPHA_H
-
-/* alpha does not support KVM */
-
-#endif
diff --git a/include/asm-arm/kvm.h b/include/asm-arm/kvm.h
deleted file mode 100644
index cb3c08cbcb9..00000000000
--- a/include/asm-arm/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_ARM_H
-#define __LINUX_KVM_ARM_H
-
-/* arm does not support KVM */
-
-#endif
diff --git a/include/asm-avr32/kvm.h b/include/asm-avr32/kvm.h
deleted file mode 100644
index 8c5777020e2..00000000000
--- a/include/asm-avr32/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_AVR32_H
-#define __LINUX_KVM_AVR32_H
-
-/* avr32 does not support KVM */
-
-#endif
diff --git a/include/asm-blackfin/kvm.h b/include/asm-blackfin/kvm.h
deleted file mode 100644
index e3477d77c01..00000000000
--- a/include/asm-blackfin/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_BLACKFIN_H
-#define __LINUX_KVM_BLACKFIN_H
-
-/* blackfin does not support KVM */
-
-#endif
diff --git a/include/asm-cris/kvm.h b/include/asm-cris/kvm.h
deleted file mode 100644
index c860f51149f..00000000000
--- a/include/asm-cris/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_CRIS_H
-#define __LINUX_KVM_CRIS_H
-
-/* cris does not support KVM */
-
-#endif
diff --git a/include/asm-frv/kvm.h b/include/asm-frv/kvm.h
deleted file mode 100644
index 9c8a4f08d0a..00000000000
--- a/include/asm-frv/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_FRV_H
-#define __LINUX_KVM_FRV_H
-
-/* frv does not support KVM */
-
-#endif
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 7cd25b8e7c9..1170dc60e63 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,4 +1,6 @@
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 header-y  += kvm.h
+endif
 
 ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
 unifdef-y += a.out.h
diff --git a/include/asm-h8300/kvm.h b/include/asm-h8300/kvm.h
deleted file mode 100644
index bdbed7b987e..00000000000
--- a/include/asm-h8300/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_H8300_H
-#define __LINUX_KVM_H8300_H
-
-/* h8300 does not support KVM */
-
-#endif
diff --git a/include/asm-m32r/kvm.h b/include/asm-m32r/kvm.h
deleted file mode 100644
index 99a40515b77..00000000000
--- a/include/asm-m32r/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_M32R_H
-#define __LINUX_KVM_M32R_H
-
-/* m32r does not support KVM */
-
-#endif
diff --git a/include/asm-m68k/kvm.h b/include/asm-m68k/kvm.h
deleted file mode 100644
index 7ed27fce524..00000000000
--- a/include/asm-m68k/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_M68K_H
-#define __LINUX_KVM_M68K_H
-
-/* m68k does not support KVM */
-
-#endif
diff --git a/include/asm-m68knommu/kvm.h b/include/asm-m68knommu/kvm.h
deleted file mode 100644
index b49d4258dab..00000000000
--- a/include/asm-m68knommu/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_M68KNOMMU_H
-#define __LINUX_KVM_M68KNOMMU_H
-
-/* m68knommu does not support KVM */
-
-#endif
diff --git a/include/asm-mips/kvm.h b/include/asm-mips/kvm.h
deleted file mode 100644
index 093a5b7f796..00000000000
--- a/include/asm-mips/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_MIPS_H
-#define __LINUX_KVM_MIPS_H
-
-/* mips does not support KVM */
-
-#endif
diff --git a/include/asm-mn10300/kvm.h b/include/asm-mn10300/kvm.h
deleted file mode 100644
index f6b609ff4a5..00000000000
--- a/include/asm-mn10300/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_MN10300_H
-#define __LINUX_KVM_MN10300_H
-
-/* mn10300 does not support KVM */
-
-#endif
diff --git a/include/asm-parisc/kvm.h b/include/asm-parisc/kvm.h
deleted file mode 100644
index 00cc4581254..00000000000
--- a/include/asm-parisc/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_PARISC_H
-#define __LINUX_KVM_PARISC_H
-
-/* parisc does not support KVM */
-
-#endif
diff --git a/include/asm-s390/Kbuild b/include/asm-s390/Kbuild
index bb5e9edb982..63a23415fba 100644
--- a/include/asm-s390/Kbuild
+++ b/include/asm-s390/Kbuild
@@ -7,7 +7,6 @@ header-y += tape390.h
 header-y += ucontext.h
 header-y += vtoc.h
 header-y += zcrypt.h
-header-y += kvm.h
 header-y += chsc.h
 
 unifdef-y += cmb.h
diff --git a/include/asm-sh/kvm.h b/include/asm-sh/kvm.h
deleted file mode 100644
index 6af51dbab2d..00000000000
--- a/include/asm-sh/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_SH_H
-#define __LINUX_KVM_SH_H
-
-/* sh does not support KVM */
-
-#endif
diff --git a/include/asm-sparc/kvm.h b/include/asm-sparc/kvm.h
deleted file mode 100644
index 2e5478da381..00000000000
--- a/include/asm-sparc/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_SPARC_H
-#define __LINUX_KVM_SPARC_H
-
-/* sparc does not support KVM */
-
-#endif
diff --git a/include/asm-sparc64/kvm.h b/include/asm-sparc64/kvm.h
deleted file mode 100644
index 53564ad86b1..00000000000
--- a/include/asm-sparc64/kvm.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kvm.h>
diff --git a/include/asm-um/kvm.h b/include/asm-um/kvm.h
deleted file mode 100644
index 66aa7709455..00000000000
--- a/include/asm-um/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_UM_H
-#define __LINUX_KVM_UM_H
-
-/* um does not support KVM */
-
-#endif
diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild
index 1e3554596f7..811e9828ccb 100644
--- a/include/asm-x86/Kbuild
+++ b/include/asm-x86/Kbuild
@@ -3,7 +3,6 @@ include include/asm-generic/Kbuild.asm
 header-y += boot.h
 header-y += bootparam.h
 header-y += debugreg.h
-header-y += kvm.h
 header-y += ldt.h
 header-y += msr-index.h
 header-y += prctl.h
diff --git a/include/asm-xtensa/kvm.h b/include/asm-xtensa/kvm.h
deleted file mode 100644
index bda4e331e98..00000000000
--- a/include/asm-xtensa/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_XTENSA_H
-#define __LINUX_KVM_XTENSA_H
-
-/* xtensa does not support KVM */
-
-#endif
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 71d70d1fbce..402c8f55d71 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -256,7 +256,9 @@ unifdef-y += kd.h
 unifdef-y += kernelcapi.h
 unifdef-y += kernel.h
 unifdef-y += keyboard.h
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 unifdef-y += kvm.h
+endif
 unifdef-y += llc.h
 unifdef-y += loop.h
 unifdef-y += lp.h
-- 
cgit v1.2.3


From c6af5e9f8a57467df2e55e428316a43480174521 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 15:48:04 +0200
Subject: bootmem: Move node allocation macros back to !HAVE_ARCH_BOOTMEM_NODE

These got unintentionally moved, put them back as x86 provides its own
versions.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/bootmem.h | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 4ddf2922fc8..652470b687c 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -103,17 +103,16 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 	__alloc_bootmem(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages(x) \
 	__alloc_bootmem_low(x, PAGE_SIZE, 0)
-#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
-
-extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
-				   int flags);
-
 #define alloc_bootmem_node(pgdat, x) \
 	__alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_pages_node(pgdat, x) \
 	__alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages_node(pgdat, x) \
 	__alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0)
+#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
+
+extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
+				   int flags);
 
 extern void *alloc_bootmem_section(unsigned long size,
 				   unsigned long section_nr);
-- 
cgit v1.2.3


From e6883b187920e71ae57bbc9c07885afdd83ddc4e Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Thu, 5 Jun 2008 16:43:46 +0200
Subject: kbuild: refactor headers_* targets in Makefile

o Use lower case for local variables
o Add a helper target for common targets
o Use $(hdr-inst)= ... to make Make invocations simpler
o Add -rR to make invocations

In total this adds more lines than it removes but the
benefit is better readability

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
---
 Makefile | 39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/Makefile b/Makefile
index 4bcd1cf90cb..f95066176dd 100644
--- a/Makefile
+++ b/Makefile
@@ -1010,36 +1010,43 @@ firmware_install: FORCE
 
 # ---------------------------------------------------------------------------
 # Kernel headers
-INSTALL_HDR_PATH=$(objtree)/usr
-export INSTALL_HDR_PATH
 
-HDRFILTER=generic i386 x86_64
-HDRARCHES=$(filter-out $(HDRFILTER),$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
+#Default location for installed headers
+export INSTALL_HDR_PATH = $(objtree)/usr
 
-PHONY += headers_install_all
-headers_install_all: include/linux/version.h scripts_basic FORCE
+hdr-filter := generic um ppc
+hdr-archs  := $(filter-out $(hdr-filter),                           \
+                  $(patsubst $(srctree)/include/asm-%/Kbuild,%,     \
+                      $(wildcard $(srctree)/include/asm-*/Kbuild)))
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+
+PHONY += __headers
+__headers: include/linux/version.h scripts_basic FORCE
 	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
-	$(Q)for arch in $(HDRARCHES); do \
-	 $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch ;\
+
+PHONY += headers_install_all
+headers_install_all: __headers
+	$(Q)for arch in $(hdr-archs); do \
+	 $(MAKE) ARCH=$$arch $(hdr-inst)=include BIASMDIR=-bi-$$arch ;\
 	 done
 
 PHONY += headers_install
-headers_install: include/linux/version.h scripts_basic FORCE
-	@if [ ! -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
+headers_install: __headers
+	$(Q)if [ ! -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
 	  echo '*** Error: Headers not exportable for this architecture ($(SRCARCH))'; \
-	  exit 1 ; fi
-	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include
+	  exit 1 ; \
+	fi
+	$(Q)$(MAKE) $(hdr-inst)=include ARCH=$(SRCARCH)
 
 PHONY += headers_check_all
 headers_check_all: headers_install_all
-	$(Q)for arch in $(HDRARCHES); do \
-	 $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch HDRCHECK=1 ;\
+	$(Q)for arch in $(hdr-archs); do \
+	 $(MAKE) ARCH=$$arch $(hdr-inst)=include BIASMDIR=-bi-$$arch HDRCHECK=1 ;\
 	 done
 
 PHONY += headers_check
 headers_check: headers_install
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst ARCH=$(SRCARCH) obj=include HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=include ARCH=$(SRCARCH) HDRCHECK=1
 
 # ---------------------------------------------------------------------------
 # Modules
-- 
cgit v1.2.3


From 4e420aa94c9e6974533797efd1dd93e779d490c3 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Thu, 5 Jun 2008 16:52:15 +0200
Subject: kbuild: always unifdef files in headers_install*

unifdef utility is fast enough to warrant that we always
run the scripts through unifdef.

This patch runs all headers listed with header-y and unifdef-y
through unifdef.
Next step is to drop unifdef-y in all Kbuild files and
that can now be done in smaller steps.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Adrian Bunk <bunk@kernel.org>
---
 scripts/Makefile.headersinst | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 53dae3eb3d1..22b17af0902 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -50,25 +50,22 @@ ifeq ($(obj)$(ALTARCH),include/asm-$(ARCH)$(BIASMDIR))
      _dst := include/asm
 endif
 
-header-y	:= $(sort $(header-y))
-unifdef-y	:= $(sort $(unifdef-y))
+header-y	:= $(sort $(header-y) $(unifdef-y))
 subdir-y	:= $(patsubst %/,%,$(filter %/, $(header-y)))
 header-y	:= $(filter-out %/, $(header-y))
-header-y	:= $(filter-out $(unifdef-y),$(header-y))
 
 # stamp files for header checks
-check-y		:= $(patsubst %,.check.%,$(header-y) $(unifdef-y) $(objhdr-y))
+check-y		:= $(patsubst %,.check.%,$(header-y) $(objhdr-y))
 
 # Work out what needs to be removed
 oldheaders	:= $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/*.h))
-unwanted	:= $(filter-out $(header-y) $(unifdef-y) $(objhdr-y),$(oldheaders))
+unwanted	:= $(filter-out $(header-y) $(objhdr-y),$(oldheaders))
 
 oldcheckstamps	:= $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/.check.*.h))
 unwanted	+= $(filter-out $(check-y),$(oldcheckstamps))
 
 # Prefix them all with full paths to $(INSTALL_HDR_PATH)
 header-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y))
-unifdef-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(unifdef-y))
 objhdr-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y))
 check-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y))
 
@@ -88,10 +85,6 @@ quiet_cmd_o_hdr_install   = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
       cmd_o_hdr_install   = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \
 			    $(INSTALL_HDR_PATH)/$(_dst)
 
-quiet_cmd_headers_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_headers_install = $(HDRSED) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@)	\
-			    > $@
-
 quiet_cmd_unifdef	  = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
       cmd_unifdef	  = $(UNIFDEF) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \
 				   | $(HDRSED) > $@ || :
@@ -151,10 +144,10 @@ include /dev/null $(wildcard $(check-y))
 
 else
 # Rules for installing headers
-__headersinst: $(subdir-y) $(header-y) $(unifdef-y) $(altarch-y) $(objhdr-y)
+__headersinst: $(subdir-y) $(header-y) $(altarch-y) $(objhdr-y)
 	@true
 
-$(objhdr-y) $(subdir-y) $(header-y) $(unifdef-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted)
+$(objhdr-y) $(subdir-y) $(header-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted)
 
 $(INSTALL_HDR_PATH)/$(_dst):
 	$(call cmd,mkdir)
@@ -164,18 +157,16 @@ $(unwanted):
 	$(call cmd,remove)
 
 ifdef GENASM
-$(objhdr-y) $(header-y) $(unifdef-y): $(KBUILDFILES)
+$(objhdr-y) $(header-y): $(KBUILDFILES)
 	$(call cmd,gen)
 
 else
-$(objhdr-y) :		$(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES)
+$(objhdr-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES)
 	$(call cmd,o_hdr_install)
 
-$(header-y) :		$(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
-	$(call cmd,headers_install)
-
-$(unifdef-y) :		$(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
+$(header-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
 	$(call cmd,unifdef)
+
 endif
 endif
 
@@ -184,7 +175,7 @@ hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
 .PHONY: altarch-dir
 # All the files in the normal arch dir must be created first, since we test
 # for their existence.
-altarch-dir: $(subdir-y) $(header-y) $(unifdef-y) $(objhdr-y)
+altarch-dir: $(subdir-y) $(header-y) $(objhdr-y)
 	$(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH)
 	$(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm$(BIASMDIR)
 
-- 
cgit v1.2.3


From 283039fb7ded6b863eacc9cfd67232297622e52d Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Thu, 5 Jun 2008 19:19:47 +0200
Subject: kbuild: drop support of ALTARCH for headers_*

ALTARCH is no longer used by any arch(*) so drop
support for this from Makefile.headerinst

Dropping ALTARCH support simplifies Makefile.headerinst

(*) sparc64 uses it but work is ongoing to drop it
and no furter usage is planned.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Miller <davem@davemloft.net>
---
 scripts/Makefile.headersinst | 84 +++++---------------------------------------
 1 file changed, 9 insertions(+), 75 deletions(-)

diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 22b17af0902..1fb8c003920 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -23,30 +23,17 @@ HDRSED  := sed 	-e "s/ inline / __inline__ /g" \
 
 _dst := $(if $(dst),$(dst),$(obj))
 
-ifeq (,$(patsubst include/asm/%,,$(obj)/))
-# For producing the generated stuff in include/asm for biarch builds, include
-# both sets of Kbuild files; we'll generate anything which is mentioned in
-# _either_ arch, and recurse into subdirectories which are mentioned in either
-# arch. Since some directories may exist in one but not the other, we must
-# use $(wildcard...). 
-GENASM := 1
-archasm	   := $(subst include/asm,asm-$(ARCH),$(obj))
-altarchasm := $(subst include/asm,asm-$(ALTARCH),$(obj))
-KBUILDFILES := $(wildcard $(srctree)/include/$(archasm)/Kbuild $(srctree)/include/$(altarchasm)/Kbuild)
-else
-KBUILDFILES := $(srctree)/$(obj)/Kbuild
-endif
+kbuild-file := $(srctree)/$(obj)/Kbuild
+include $(kbuild-file)
 
-include $(KBUILDFILES)
+include scripts/Kbuild.include
 
-include scripts/Kbuild.include 
-
-# If this is include/asm-$(ARCH) and there's no $(ALTARCH), then
-# override $(_dst) so that we install to include/asm directly.
+# If this is include/asm-$(ARCH) then override $(_dst) so that
+# we install to include/asm directly.
 # Unless $(BIASMDIR) is set, in which case we're probably doing
 # a 'headers_install_all' build and we should keep the -$(ARCH)
 # in the directory name.
-ifeq ($(obj)$(ALTARCH),include/asm-$(ARCH)$(BIASMDIR))
+ifeq ($(obj),include/asm-$(ARCH)$(BIASMDIR))
      _dst := include/asm
 endif
 
@@ -69,18 +56,6 @@ header-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y))
 objhdr-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y))
 check-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y))
 
-
-ifdef ALTARCH
-ifeq ($(obj),include/asm-$(ARCH))
-altarch-y	:= altarch-dir
-endif
-endif
-
-# Make the definitions visible for recursive make invocations
-export ALTARCH
-export ARCHDEF
-export ALTARCHDEF
-
 quiet_cmd_o_hdr_install   = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
       cmd_o_hdr_install   = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \
 			    $(INSTALL_HDR_PATH)/$(_dst)
@@ -99,34 +74,6 @@ quiet_cmd_remove	  = REMOVE  $(_dst)/$@
 quiet_cmd_mkdir		  = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
       cmd_mkdir		  = mkdir -p $@
 
-quiet_cmd_gen		  = GEN     $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_gen		  = \
-FNAME=$(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$@);			\
-STUBDEF=__ASM_STUB_`echo $$FNAME | tr a-z.- A-Z__`;			\
-(echo "/* File autogenerated by 'make headers_install' */" ;		\
-echo "\#ifndef $$STUBDEF" ;						\
-echo "\#define $$STUBDEF" ;						\
-echo "\# if $(ARCHDEF)" ;						\
-if [ -r $(subst /$(_dst)/,/include/$(archasm)/,$@) ]; then		\
-	echo "\#  include <$(archasm)/$$FNAME>" ;			\
-else									\
-	echo "\#  error $(archasm)/$$FNAME does not exist in"		\
-			"the $(ARCH) architecture" ;			\
-fi ;									\
-echo "\# elif $(ALTARCHDEF)" ;						\
-if [ -r $(subst /$(_dst)/,/include/$(altarchasm)/,$@) ]; then		\
-	echo "\#  include <$(altarchasm)/$$FNAME>" ;			\
-else									\
-	echo "\#  error $(altarchasm)/$$FNAME does not exist in"	\
-			"the $(ALTARCH) architecture" ;			\
-fi ;									\
-echo "\# else" ;							\
-echo "\#  warning This machine appears to be"				\
-		 "neither $(ARCH) nor $(ALTARCH)." ;			\
-echo "\# endif" ;							\
-echo "\#endif /* $$STUBDEF */" ;					\
-) > $@
-
 .PHONY: __headersinst __headerscheck
 
 ifdef HDRCHECK
@@ -144,7 +91,7 @@ include /dev/null $(wildcard $(check-y))
 
 else
 # Rules for installing headers
-__headersinst: $(subdir-y) $(header-y) $(altarch-y) $(objhdr-y)
+__headersinst: $(subdir-y) $(header-y) $(objhdr-y)
 	@true
 
 $(objhdr-y) $(subdir-y) $(header-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted)
@@ -156,29 +103,16 @@ $(INSTALL_HDR_PATH)/$(_dst):
 $(unwanted):
 	$(call cmd,remove)
 
-ifdef GENASM
-$(objhdr-y) $(header-y): $(KBUILDFILES)
-	$(call cmd,gen)
-
-else
-$(objhdr-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(KBUILDFILES)
+$(objhdr-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(kbuild-file)
 	$(call cmd,o_hdr_install)
 
-$(header-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(KBUILDFILES)
+$(header-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(kbuild-file)
 	$(call cmd,unifdef)
 
 endif
-endif
 
 hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
 
-.PHONY: altarch-dir
-# All the files in the normal arch dir must be created first, since we test
-# for their existence.
-altarch-dir: $(subdir-y) $(header-y) $(objhdr-y)
-	$(Q)$(MAKE) $(hdrinst)=include/asm-$(ALTARCH) dst=include/asm-$(ALTARCH)
-	$(Q)$(MAKE) $(hdrinst)=include/asm dst=include/asm$(BIASMDIR)
-
 # Recursion
 .PHONY: $(subdir-y)
 $(subdir-y):
-- 
cgit v1.2.3


From 62284a37dcd6725921410fb75446d270cc726b4f Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sat, 7 Jun 2008 13:18:26 +0200
Subject: kbuild: code refactoring in Makefile.headerinst

No functional changes just improved readability

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/Makefile.headersinst | 64 ++++++++++++++++++++++++--------------------
 1 file changed, 35 insertions(+), 29 deletions(-)

diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 1fb8c003920..599adc63b84 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -10,7 +10,7 @@
 UNIFDEF := scripts/unifdef -U__KERNEL__
 
 # Eliminate the contents of (and inclusions of) compiler.h
-HDRSED  := sed 	-e "s/ inline / __inline__ /g" \
+HDRSED  := sed	-e "s/ inline / __inline__ /g" \
 		-e "s/[[:space:]]__user[[:space:]]\{1,\}/ /g" \
 		-e "s/(__user[[:space:]]\{1,\}/ (/g" \
 		-e "s/[[:space:]]__force[[:space:]]\{1,\}/ /g" \
@@ -37,6 +37,8 @@ ifeq ($(obj),include/asm-$(ARCH)$(BIASMDIR))
      _dst := include/asm
 endif
 
+install := $(INSTALL_HDR_PATH)/$(_dst)
+
 header-y	:= $(sort $(header-y) $(unifdef-y))
 subdir-y	:= $(patsubst %/,%,$(filter %/, $(header-y)))
 header-y	:= $(filter-out %/, $(header-y))
@@ -45,34 +47,34 @@ header-y	:= $(filter-out %/, $(header-y))
 check-y		:= $(patsubst %,.check.%,$(header-y) $(objhdr-y))
 
 # Work out what needs to be removed
-oldheaders	:= $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/*.h))
-unwanted	:= $(filter-out $(header-y) $(objhdr-y),$(oldheaders))
+oldheaders      := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h))
+unwanted        := $(filter-out $(header-y) $(objhdr-y),$(oldheaders))
 
-oldcheckstamps	:= $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,%,$(wildcard $(INSTALL_HDR_PATH)/$(_dst)/.check.*.h))
-unwanted	+= $(filter-out $(check-y),$(oldcheckstamps))
+oldcheckstamps  := $(patsubst $(install)/%,%,$(wildcard $(install)/.check.*.h))
+unwanted        += $(filter-out $(check-y),$(oldcheckstamps))
 
 # Prefix them all with full paths to $(INSTALL_HDR_PATH)
-header-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(header-y))
-objhdr-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(objhdr-y))
-check-y 	:= $(patsubst %,$(INSTALL_HDR_PATH)/$(_dst)/%,$(check-y))
+header-y        := $(patsubst %,$(install)/%,$(header-y))
+objhdr-y        := $(patsubst %,$(install)/%,$(objhdr-y))
+check-y         := $(patsubst %,$(install)/%,$(check-y))
 
-quiet_cmd_o_hdr_install   = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_o_hdr_install   = cp $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(objtree)/$(obj)/%,$@) \
-			    $(INSTALL_HDR_PATH)/$(_dst)
+quiet_cmd_o_hdr_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
+      cmd_o_hdr_install = cp $(patsubst $(install)/%,$(objtree)/$(obj)/%,$@) \
+                             $(install)
 
-quiet_cmd_unifdef	  = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_unifdef	  = $(UNIFDEF) $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/%,$(srctree)/$(obj)/%,$@) \
-				   | $(HDRSED) > $@ || :
+quiet_cmd_unifdef = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
+      cmd_unifdef = $(UNIFDEF) $(patsubst $(install)/%,$(srctree)/$(obj)/%,$@)\
+                               | $(HDRSED) > $@ || :
 
-quiet_cmd_check		  = CHECK   $(patsubst $(INSTALL_HDR_PATH)/$(_dst)/.check.%,$(_dst)/%,$@)
-      cmd_check		  = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \
-                              $(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@
+quiet_cmd_check = CHECK   $(patsubst $(install)/.check.%,$(_dst)/%,$@)
+      cmd_check = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \
+                  $(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@
 
-quiet_cmd_remove	  = REMOVE  $(_dst)/$@
-      cmd_remove	  = rm -f $(INSTALL_HDR_PATH)/$(_dst)/$@
+quiet_cmd_remove = REMOVE  $(_dst)/$@
+      cmd_remove = rm -f $(install)/$@
 
-quiet_cmd_mkdir		  = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_mkdir		  = mkdir -p $@
+quiet_cmd_mkdir  = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
+      cmd_mkdir  = mkdir -p $@
 
 .PHONY: __headersinst __headerscheck
 
@@ -80,13 +82,14 @@ ifdef HDRCHECK
 __headerscheck: $(subdir-y) $(check-y)
 	@true
 
-$(check-y) : $(INSTALL_HDR_PATH)/$(_dst)/.check.%.h : $(INSTALL_HDR_PATH)/$(_dst)/%.h 
+$(check-y) : $(install)/.check.%.h : $(install)/%.h
 	$(call cmd,check)
 
 # Other dependencies for $(check-y)
 include /dev/null $(wildcard $(check-y))
 
-# ... but leave $(check-y) as .PHONY for now until those deps are actually correct.
+# but leave $(check-y) as .PHONY for now until those
+# deps are actually correct.
 .PHONY: $(check-y)
 
 else
@@ -94,26 +97,29 @@ else
 __headersinst: $(subdir-y) $(header-y) $(objhdr-y)
 	@true
 
-$(objhdr-y) $(subdir-y) $(header-y): | $(INSTALL_HDR_PATH)/$(_dst) $(unwanted)
+$(objhdr-y) $(subdir-y) $(header-y): | $(install) $(unwanted)
 
-$(INSTALL_HDR_PATH)/$(_dst):
+$(install):
 	$(call cmd,mkdir)
 
+# Rules for removing unwanted header files
 .PHONY: $(unwanted)
 $(unwanted):
 	$(call cmd,remove)
 
-$(objhdr-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(objtree)/$(obj)/%.h $(kbuild-file)
+# Install generated files
+$(objhdr-y): $(install)/%.h: $(objtree)/$(obj)/%.h $(kbuild-file)
 	$(call cmd,o_hdr_install)
 
-$(header-y): $(INSTALL_HDR_PATH)/$(_dst)/%.h: $(srctree)/$(obj)/%.h $(kbuild-file)
+# Unifdef header files and install them
+$(header-y): $(install)/%.h: $(srctree)/$(obj)/%.h $(kbuild-file)
 	$(call cmd,unifdef)
 
 endif
 
-hdrinst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
 
 # Recursion
 .PHONY: $(subdir-y)
 $(subdir-y):
-	$(Q)$(MAKE) $(hdrinst)=$(obj)/$@ dst=$(_dst)/$@ rel=../$(rel)
+	$(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
-- 
cgit v1.2.3


From f6ecd4c84a279a7c82f45687a612302becd7b844 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 8 Jun 2008 12:28:22 +0200
Subject: kbuild: error out early in make headers_install

Fix the a.out.h case by setting SRCARCH and error
out early in case of an error.
The a.out.h case failed with the *_all targets.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Makefile | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/Makefile b/Makefile
index f95066176dd..33e735c9065 100644
--- a/Makefile
+++ b/Makefile
@@ -1026,8 +1026,9 @@ __headers: include/linux/version.h scripts_basic FORCE
 
 PHONY += headers_install_all
 headers_install_all: __headers
-	$(Q)for arch in $(hdr-archs); do \
-	 $(MAKE) ARCH=$$arch $(hdr-inst)=include BIASMDIR=-bi-$$arch ;\
+	$(Q)set -e; for arch in $(hdr-archs); do \
+	 $(MAKE) ARCH=$$arch SRCARCH=$$arch $(hdr-inst)=include \
+	         BIASMDIR=-bi-$$arch ;\
 	 done
 
 PHONY += headers_install
@@ -1040,8 +1041,9 @@ headers_install: __headers
 
 PHONY += headers_check_all
 headers_check_all: headers_install_all
-	$(Q)for arch in $(hdr-archs); do \
-	 $(MAKE) ARCH=$$arch $(hdr-inst)=include BIASMDIR=-bi-$$arch HDRCHECK=1 ;\
+	$(Q)set -e; for arch in $(hdr-archs); do \
+	 $(MAKE) ARCH=$$arch SRCARCH=$$arch $(hdr-inst)=include \
+	         BIASMDIR=-bi-$$arch HDRCHECK=1 ;\
 	 done
 
 PHONY += headers_check
-- 
cgit v1.2.3


From 88181ec30f58a28cd78b26aaac38bef4062b23dc Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 9 Jun 2008 21:24:28 +0200
Subject: kbuild: only one call for include/ in make headers_*

Move it to the top-level file to decide if we install/check
the generic headers or the arch specific headers.

This revealed a long standing bug where "make headers_check_all"
relied on the files in asm/ for the current architecture.
So make headers_check_all is now broken by this commit.

In addition:

o add a simpler way to detect if an arch support
  exporting header files.

o add 'set -e;' so we error out early if
  make headers_check_all fails.

o add sparc64 and cris to arch we do not process
  in make headers_*_all because:

    sparc64 - use sparc to export headers
    cris    - is know seriously broken

Includes suggestions from: David Woodhouse
<dwmw2@infradead.org>.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
---
 Makefile                     | 24 +++++++++++++-----------
 include/Kbuild               |  5 +++--
 scripts/Makefile.headersinst |  9 ---------
 3 files changed, 16 insertions(+), 22 deletions(-)

diff --git a/Makefile b/Makefile
index 33e735c9065..2f0136401ba 100644
--- a/Makefile
+++ b/Makefile
@@ -1014,7 +1014,7 @@ firmware_install: FORCE
 #Default location for installed headers
 export INSTALL_HDR_PATH = $(objtree)/usr
 
-hdr-filter := generic um ppc
+hdr-filter := generic um ppc sparc64 cris
 hdr-archs  := $(filter-out $(hdr-filter),                           \
                   $(patsubst $(srctree)/include/asm-%/Kbuild,%,     \
                       $(wildcard $(srctree)/include/asm-*/Kbuild)))
@@ -1026,29 +1026,31 @@ __headers: include/linux/version.h scripts_basic FORCE
 
 PHONY += headers_install_all
 headers_install_all: __headers
+	$(Q)$(MAKE) $(hdr-inst)=include
 	$(Q)set -e; for arch in $(hdr-archs); do \
-	 $(MAKE) ARCH=$$arch SRCARCH=$$arch $(hdr-inst)=include \
-	         BIASMDIR=-bi-$$arch ;\
+	 $(MAKE) $(hdr-inst)=include/asm-$$arch   \
+	         SRCARCH=$$arch dst=include/asm-$$arch;  \
 	 done
 
 PHONY += headers_install
 headers_install: __headers
-	$(Q)if [ ! -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
-	  echo '*** Error: Headers not exportable for this architecture ($(SRCARCH))'; \
-	  exit 1 ; \
-	fi
-	$(Q)$(MAKE) $(hdr-inst)=include ARCH=$(SRCARCH)
+	$(if $(wildcard $(srctree)/include/asm-$(SRCARCH)/Kbuild),, \
+	$(error Headers not exportable for this architecture ($(SRCARCH))))
+	$(Q)$(MAKE) $(hdr-inst)=include
+	$(Q)$(MAKE) $(hdr-inst)=include/asm-$(SRCARCH) dst=include/asm
 
 PHONY += headers_check_all
 headers_check_all: headers_install_all
+	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
 	$(Q)set -e; for arch in $(hdr-archs); do \
-	 $(MAKE) ARCH=$$arch SRCARCH=$$arch $(hdr-inst)=include \
-	         BIASMDIR=-bi-$$arch HDRCHECK=1 ;\
+	 $(MAKE) SRCARCH=$$arch $(hdr-inst)=include/asm-$$arch HDRCHECK=1 ;\
 	 done
 
 PHONY += headers_check
 headers_check: headers_install
-	$(Q)$(MAKE) $(hdr-inst)=include ARCH=$(SRCARCH) HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=include/asm-$(SRCARCH) \
+	            dst=include/asm HDRCHECK=1
 
 # ---------------------------------------------------------------------------
 # Modules
diff --git a/include/Kbuild b/include/Kbuild
index bdca155028e..d8c3e3cbf41 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -1,3 +1,6 @@
+# Top-level Makefile calls into asm-$(ARCH)
+# List only non-arch directories below
+
 header-y += asm-generic/
 header-y += linux/
 header-y += sound/
@@ -5,5 +8,3 @@ header-y += mtd/
 header-y += rdma/
 header-y += video/
 header-y += drm/
-
-header-y += asm-$(ARCH)/
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 599adc63b84..599503f0e5f 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -28,15 +28,6 @@ include $(kbuild-file)
 
 include scripts/Kbuild.include
 
-# If this is include/asm-$(ARCH) then override $(_dst) so that
-# we install to include/asm directly.
-# Unless $(BIASMDIR) is set, in which case we're probably doing
-# a 'headers_install_all' build and we should keep the -$(ARCH)
-# in the directory name.
-ifeq ($(obj),include/asm-$(ARCH)$(BIASMDIR))
-     _dst := include/asm
-endif
-
 install := $(INSTALL_HDR_PATH)/$(_dst)
 
 header-y	:= $(sort $(header-y) $(unifdef-y))
-- 
cgit v1.2.3


From 7712401ae9006fc9d9b9a3e7861dc73781429a89 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 15 Jun 2008 21:41:09 +0200
Subject: kbuild: optimize headers_* targets

Move the core functionality of headers_install
and headers_check to two small perl scripts.
The makefile is adapted to use the perl scrip and
changed to operate on all files in a directory.
So if one file is changed then all files in the
directory is processed.

perl were chosen for the helper scripts because this
is pure text processing which perl is good at and
especially the headers_check.pl script are expected to
see changes / new checks implmented.

The speed is ~300% faster on this box.
And the output generated to the screen is now down to
two lines per directory (one for install, one for check)
so it is easier to scroll back after a kernel build.

The perl scripts has been brought to sanity by patient
feedback from: Vegard Nossum <vegard.nossum@gmail.com>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/Makefile.headersinst | 145 +++++++++++++++++++------------------------
 scripts/hdrcheck.sh          |  10 ---
 scripts/headers_check.pl     |  56 +++++++++++++++++
 scripts/headers_install.pl   |  42 +++++++++++++
 4 files changed, 161 insertions(+), 92 deletions(-)
 delete mode 100755 scripts/hdrcheck.sh
 create mode 100644 scripts/headers_check.pl
 create mode 100644 scripts/headers_install.pl

diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 599503f0e5f..be2b70c48a3 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -1,26 +1,14 @@
 # ==========================================================================
 # Installing headers
 #
-# header-y files will be installed verbatim
-# unifdef-y are the files where unifdef will be run before installing files
-# objhdr-y are generated files that will be installed verbatim
+# header-y  - list files to be installed. They are preprocessed
+#             to remove __KERNEL__ section of the file
+# unifdef-y - Same as header-y. Obsolete
+# objhdr-y  - Same as header-y but for generated files
 #
 # ==========================================================================
 
-UNIFDEF := scripts/unifdef -U__KERNEL__
-
-# Eliminate the contents of (and inclusions of) compiler.h
-HDRSED  := sed	-e "s/ inline / __inline__ /g" \
-		-e "s/[[:space:]]__user[[:space:]]\{1,\}/ /g" \
-		-e "s/(__user[[:space:]]\{1,\}/ (/g" \
-		-e "s/[[:space:]]__force[[:space:]]\{1,\}/ /g" \
-		-e "s/(__force[[:space:]]\{1,\}/ (/g" \
-		-e "s/[[:space:]]__iomem[[:space:]]\{1,\}/ /g" \
-		-e "s/(__iomem[[:space:]]\{1,\}/ (/g" \
-		-e "s/[[:space:]]__attribute_const__[[:space:]]\{1,\}/\ /g" \
-		-e "s/[[:space:]]__attribute_const__$$//" \
-		-e "/^\#include <linux\/compiler.h>/d"
-
+# called may set destination dir (when installing to asm/)
 _dst := $(if $(dst),$(dst),$(obj))
 
 kbuild-file := $(srctree)/$(obj)/Kbuild
@@ -28,89 +16,82 @@ include $(kbuild-file)
 
 include scripts/Kbuild.include
 
-install := $(INSTALL_HDR_PATH)/$(_dst)
-
-header-y	:= $(sort $(header-y) $(unifdef-y))
-subdir-y	:= $(patsubst %/,%,$(filter %/, $(header-y)))
-header-y	:= $(filter-out %/, $(header-y))
+install       := $(INSTALL_HDR_PATH)/$(_dst)
 
-# stamp files for header checks
-check-y		:= $(patsubst %,.check.%,$(header-y) $(objhdr-y))
-
-# Work out what needs to be removed
-oldheaders      := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h))
-unwanted        := $(filter-out $(header-y) $(objhdr-y),$(oldheaders))
+header-y      := $(sort $(header-y) $(unifdef-y))
+subdirs       := $(patsubst %/,%,$(filter %/, $(header-y)))
+header-y      := $(filter-out %/, $(header-y))
 
-oldcheckstamps  := $(patsubst $(install)/%,%,$(wildcard $(install)/.check.*.h))
-unwanted        += $(filter-out $(check-y),$(oldcheckstamps))
+# files used to track state of install/check
+install-file  := $(install)/.install
+check-file    := $(install)/.check
 
-# Prefix them all with full paths to $(INSTALL_HDR_PATH)
-header-y        := $(patsubst %,$(install)/%,$(header-y))
-objhdr-y        := $(patsubst %,$(install)/%,$(objhdr-y))
-check-y         := $(patsubst %,$(install)/%,$(check-y))
+# all headers files for this dir
+all-files     := $(header-y) $(objhdr-y)
+input-files   := $(addprefix $(srctree)/$(obj)/,$(header-y)) \
+                 $(addprefix $(objtree)/$(obj)/,$(objhdr-y))
+output-files  := $(addprefix $(install)/, $(all-files))
 
-quiet_cmd_o_hdr_install = INSTALL $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_o_hdr_install = cp $(patsubst $(install)/%,$(objtree)/$(obj)/%,$@) \
-                             $(install)
-
-quiet_cmd_unifdef = UNIFDEF $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_unifdef = $(UNIFDEF) $(patsubst $(install)/%,$(srctree)/$(obj)/%,$@)\
-                               | $(HDRSED) > $@ || :
+# Work out what needs to be removed
+oldheaders    := $(patsubst $(install)/%,%,$(wildcard $(install)/*.h))
+unwanted      := $(filter-out $(all-files),$(oldheaders))
 
-quiet_cmd_check = CHECK   $(patsubst $(install)/.check.%,$(_dst)/%,$@)
-      cmd_check = $(CONFIG_SHELL) $(srctree)/scripts/hdrcheck.sh \
-                  $(INSTALL_HDR_PATH)/include $(subst /.check.,/,$@) $@
+# Prefix unwanted with full paths to $(INSTALL_HDR_PATH)
+unwanted-file := $(addprefix $(install)/, $(unwanted))
 
-quiet_cmd_remove = REMOVE  $(_dst)/$@
-      cmd_remove = rm -f $(install)/$@
+printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
 
-quiet_cmd_mkdir  = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
-      cmd_mkdir  = mkdir -p $@
+quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
+                            file$(if $(word 2, $(all-files)),s))
+      cmd_install = $(PERL) $< $(srctree)/$(obj) $(install) $(header-y); \
+                    $(PERL) $< $(objtree)/$(obj) $(install) $(objhdr-y); \
+	            touch $@
 
-.PHONY: __headersinst __headerscheck
+quiet_cmd_remove = REMOVE  $(unwanted)
+      cmd_remove = rm -f $(unwanted-file)
 
-ifdef HDRCHECK
-__headerscheck: $(subdir-y) $(check-y)
-	@true
+quiet_cmd_check = CHECK   $(printdir) ($(words $(all-files)) files)
+      cmd_check = $(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH) \
+                  $(addprefix $(install)/, $(all-files));           \
+	          touch $@
 
-$(check-y) : $(install)/.check.%.h : $(install)/%.h
-	$(call cmd,check)
+PHONY += __headersinst __headerscheck
 
-# Other dependencies for $(check-y)
-include /dev/null $(wildcard $(check-y))
+ifndef HDRCHECK
+# Rules for installing headers
+__headersinst: $(subdirs) $(install-file)
+	@:
 
-# but leave $(check-y) as .PHONY for now until those
-# deps are actually correct.
-.PHONY: $(check-y)
+targets += $(install-file)
+$(install-file): scripts/headers_install.pl $(input-files) FORCE
+	$(if $(unwanted),$(call cmd,remove),)
+	$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
+	$(call if_changed,install)
 
 else
-# Rules for installing headers
-__headersinst: $(subdir-y) $(header-y) $(objhdr-y)
-	@true
+__headerscheck: $(subdirs) $(check-file)
+	@:
 
-$(objhdr-y) $(subdir-y) $(header-y): | $(install) $(unwanted)
+targets += $(check-file)
+$(check-file): scripts/headers_check.pl $(output-files) FORCE
+	$(call if_changed,check)
 
-$(install):
-	$(call cmd,mkdir)
-
-# Rules for removing unwanted header files
-.PHONY: $(unwanted)
-$(unwanted):
-	$(call cmd,remove)
+endif
 
-# Install generated files
-$(objhdr-y): $(install)/%.h: $(objtree)/$(obj)/%.h $(kbuild-file)
-	$(call cmd,o_hdr_install)
+# Recursion
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+.PHONY: $(subdirs)
+$(subdirs):
+	$(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
 
-# Unifdef header files and install them
-$(header-y): $(install)/%.h: $(srctree)/$(obj)/%.h $(kbuild-file)
-	$(call cmd,unifdef)
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard \
+             $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
 
+ifneq ($(cmd_files),)
+	include $(cmd_files)
 endif
 
-hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
-
-# Recursion
-.PHONY: $(subdir-y)
-$(subdir-y):
-	$(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
+.PHONY: $(PHONY)
+PHONY += FORCE
+FORCE: ;
diff --git a/scripts/hdrcheck.sh b/scripts/hdrcheck.sh
deleted file mode 100755
index 31598584f87..00000000000
--- a/scripts/hdrcheck.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-for FILE in `grep '^[ \t]*#[ \t]*include[ \t]*<' $2 | cut -f2 -d\< | cut -f1 -d\> | egrep ^linux\|^asm` ; do
-    if [ ! -r $1/$FILE ]; then
-	echo $2 requires $FILE, which does not exist in exported headers
-	exit 1
-    fi
-done
-# FIXME: List dependencies into $3
-touch $3
diff --git a/scripts/headers_check.pl b/scripts/headers_check.pl
new file mode 100644
index 00000000000..15d53a6b1a1
--- /dev/null
+++ b/scripts/headers_check.pl
@@ -0,0 +1,56 @@
+#!/usr/bin/perl
+#
+# headers_check.pl execute a number of trivial consistency checks
+#
+# Usage: headers_check.pl dir [files...]
+# dir:   dir to look for included files
+# arch:  architecture
+# files: list of files to check
+#
+# The script reads the supplied files line by line and:
+#
+# 1) for each include statement it checks if the
+#    included file actually exists.
+#    Only include files located in asm* and linux* are checked.
+#    The rest are assumed to be system include files.
+#
+# 2) TODO: check for leaked CONFIG_ symbols
+
+use strict;
+use warnings;
+
+my ($dir, $arch, @files) = @ARGV;
+
+my $ret = 0;
+my $line;
+my $lineno = 0;
+my $filename;
+
+foreach my $file (@files) {
+	$filename = $file;
+	open(my $fh, '<', "$filename") or die "$filename: $!\n";
+	$lineno = 0;
+	while ($line = <$fh>) {
+		$lineno++;
+		check_include();
+	}
+	close $fh;
+}
+exit $ret;
+
+sub check_include
+{
+	if ($line =~ m/^\s*#\s*include\s+<((asm|linux).*)>/) {
+		my $inc = $1;
+		my $found;
+		$found = stat($dir . "/" . $inc);
+		if (!$found) {
+			$inc =~ s#asm/#asm-$arch/#;
+			$found = stat($dir . "/" . $inc);
+		}
+		if (!$found) {
+			printf STDERR "$filename:$lineno: included file '$inc' is not exported\n";
+			$ret = 1;
+		}
+	}
+}
diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl
new file mode 100644
index 00000000000..f0ff9a35acd
--- /dev/null
+++ b/scripts/headers_install.pl
@@ -0,0 +1,42 @@
+#!/usr/bin/perl
+#
+# headers_install prepare the listed header files for use in
+# user space and copy the files to their destination.
+#
+# Usage: headers_install.pl odir installdir [files...]
+# odir:    dir to open files
+# install: dir to install the files
+# files:   list of files to check
+#
+# Step in preparation for users space:
+# 1) Drop all use of compiler.h definitions
+# 2) Drop include of compiler.h
+# 3) Drop all sections defined out by __KERNEL__ (using unifdef)
+
+use strict;
+use warnings;
+
+my ($readdir, $installdir, @files) = @ARGV;
+
+my $unifdef = "scripts/unifdef -U__KERNEL__";
+
+foreach my $file (@files) {
+	my $tmpfile = "$installdir/$file.tmp";
+	open(my $infile, '<', "$readdir/$file")
+		or die "$readdir/$file: $!\n";
+	open(my $outfile, '>', "$tmpfile") or die "$tmpfile: $!\n";
+	while (my $line = <$infile>) {
+		$line =~ s/([\s(])__user\s/$1/g;
+		$line =~ s/([\s(])__force\s/$1/g;
+		$line =~ s/([\s(])__iomem\s/$1/g;
+		$line =~ s/\s__attribute_const__\s/ /g;
+		$line =~ s/\s__attribute_const__$//g;
+		$line =~ s/^#include <linux\/compiler.h>//;
+		printf $outfile "%s", $line;
+	}
+	close $outfile;
+	close $infile;
+	system $unifdef . " $tmpfile > $installdir/$file";
+	unlink $tmpfile;
+}
+exit 0;
-- 
cgit v1.2.3


From 6b36ab27d7161bc233e014ff38d8b17ae9975dee Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sat, 7 Jun 2008 01:47:09 +0400
Subject: kbuild: make clean removes *.o.* as well

Those are left presumably from aborted ccache(1) compilations:

	arch/x86/kernel/.tmp_io_apic_64.o.T5veul
	arch/x86/kvm/.tmp_x86.o.SZWn69
	arch/x86/mm/.tmp_pgtable.o.sL1LTf
	drivers/ieee1394/.tmp_ieee1394_transactions.o.bUj6o1
	drivers/infiniband/hw/mlx4/.tmp_main.o.vy0ep6

BTW, with git there is nice way to check for such nuisainces:

	make mrproper
	git-ls-files -o

should give empty output.

More precise wildcard spec from: Jan Engelhardt <jengelh@medozas.de>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jan Engelhardt <jengelh@medozas.de>
---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 2f0136401ba..3f0a3ca5be8 100644
--- a/Makefile
+++ b/Makefile
@@ -1160,7 +1160,7 @@ clean: archclean $(clean-dirs)
 		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
 		-o -name '*.symtypes' -o -name 'modules.order' \
-		-o -name 'Module.markers' \) \
+		-o -name 'Module.markers' -o -name '.tmp_*.o.*' \) \
 		-type f -print | xargs rm -f
 
 # mrproper - Delete all generated files, including .config
-- 
cgit v1.2.3


From db1bec4f5271d7799d481cd4d95fdc268bdd7614 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 16 Jun 2008 21:29:38 +0200
Subject: kbuild: install all headers when arch is changed

We see some header files that are selected dependent on
the actual architecture so force a reinstallation
of all header files when the arch changes.
This slows down "make headers_check_all" but then
we better reflect reality.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/Makefile.headersinst |  7 ++++---
 scripts/headers_install.pl   | 13 ++++++++-----
 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index be2b70c48a3..612dc13ddd8 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -43,9 +43,10 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
 
 quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
                             file$(if $(word 2, $(all-files)),s))
-      cmd_install = $(PERL) $< $(srctree)/$(obj) $(install) $(header-y); \
-                    $(PERL) $< $(objtree)/$(obj) $(install) $(objhdr-y); \
-	            touch $@
+      cmd_install = \
+        $(PERL) $< $(srctree)/$(obj) $(install) $(SRCARCH) $(header-y); \
+        $(PERL) $< $(objtree)/$(obj) $(install) $(SRCARCH) $(objhdr-y); \
+        touch $@
 
 quiet_cmd_remove = REMOVE  $(unwanted)
       cmd_remove = rm -f $(unwanted-file)
diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl
index f0ff9a35acd..68591cd0873 100644
--- a/scripts/headers_install.pl
+++ b/scripts/headers_install.pl
@@ -3,10 +3,13 @@
 # headers_install prepare the listed header files for use in
 # user space and copy the files to their destination.
 #
-# Usage: headers_install.pl odir installdir [files...]
-# odir:    dir to open files
-# install: dir to install the files
-# files:   list of files to check
+# Usage: headers_install.pl readdir installdir arch [files...]
+# readdir:    dir to open files
+# installdir: dir to install the files
+# arch:       current architecture
+#             arch is used to force a reinstallation when the arch
+#             changes because kbuild then detect a command line change.
+# files:      list of files to check
 #
 # Step in preparation for users space:
 # 1) Drop all use of compiler.h definitions
@@ -16,7 +19,7 @@
 use strict;
 use warnings;
 
-my ($readdir, $installdir, @files) = @ARGV;
+my ($readdir, $installdir, $arch, @files) = @ARGV;
 
 my $unifdef = "scripts/unifdef -U__KERNEL__";
 
-- 
cgit v1.2.3


From 2fb9b1bd9dd7f4455407dc1bec74fb8ae0d3138e Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sat, 21 Jun 2008 00:24:17 +0200
Subject: kbuild: prepare headers_* for arch/$ARCH/include

Factor out the headers_*_all support to a seperate
shell script and add support for arch specific
header files can be located in either

    arch/$ARCH/include/asm
or
    include/asm-$ARCH/

In "make help" always display the headers_* targets.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Makefile           | 49 ++++++++++++++++++++++---------------------------
 scripts/headers.sh | 41 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+), 27 deletions(-)
 create mode 100755 scripts/headers.sh

diff --git a/Makefile b/Makefile
index 3f0a3ca5be8..c5ab2b8a138 100644
--- a/Makefile
+++ b/Makefile
@@ -205,6 +205,9 @@ ifeq ($(ARCH),x86_64)
         SRCARCH := x86
 endif
 
+# Where to locate arch specific headers
+hdr-arch       := $(SRCARCH)
+
 KCONFIG_CONFIG	?= .config
 
 # SHELL used by kbuild
@@ -1014,43 +1017,39 @@ firmware_install: FORCE
 #Default location for installed headers
 export INSTALL_HDR_PATH = $(objtree)/usr
 
-hdr-filter := generic um ppc sparc64 cris
-hdr-archs  := $(filter-out $(hdr-filter),                           \
-                  $(patsubst $(srctree)/include/asm-%/Kbuild,%,     \
-                      $(wildcard $(srctree)/include/asm-*/Kbuild)))
 hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+# Find out where the Kbuild file is located to support
+# arch/$(ARCH)/include/asm
+hdr-dir = $(strip                                                         \
+          $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild), \
+               arch/$(hdr-arch)/include/asm, include/asm-$(hdr-arch)))
+
+# If we do an all arch process set dst to asm-$(hdr-arch)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
 
 PHONY += __headers
 __headers: include/linux/version.h scripts_basic FORCE
 	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
 
 PHONY += headers_install_all
-headers_install_all: __headers
-	$(Q)$(MAKE) $(hdr-inst)=include
-	$(Q)set -e; for arch in $(hdr-archs); do \
-	 $(MAKE) $(hdr-inst)=include/asm-$$arch   \
-	         SRCARCH=$$arch dst=include/asm-$$arch;  \
-	 done
+headers_install_all:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
 
 PHONY += headers_install
 headers_install: __headers
-	$(if $(wildcard $(srctree)/include/asm-$(SRCARCH)/Kbuild),, \
-	$(error Headers not exportable for this architecture ($(SRCARCH))))
+	$(if $(wildcard $(srctree)/$(hdr-dir)/Kbuild),, \
+	$(error Headers not exportable for the $(SRCARCH) architecture))
 	$(Q)$(MAKE) $(hdr-inst)=include
-	$(Q)$(MAKE) $(hdr-inst)=include/asm-$(SRCARCH) dst=include/asm
+	$(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst)
 
 PHONY += headers_check_all
 headers_check_all: headers_install_all
-	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
-	$(Q)set -e; for arch in $(hdr-archs); do \
-	 $(MAKE) SRCARCH=$$arch $(hdr-inst)=include/asm-$$arch HDRCHECK=1 ;\
-	 done
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
 
 PHONY += headers_check
 headers_check: headers_install
 	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
-	$(Q)$(MAKE) $(hdr-inst)=include/asm-$(SRCARCH) \
-	            dst=include/asm HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) HDRCHECK=1
 
 # ---------------------------------------------------------------------------
 # Modules
@@ -1234,21 +1233,17 @@ help:
 	@echo  '  cscope	  - Generate cscope index'
 	@echo  '  kernelrelease	  - Output the release version string'
 	@echo  '  kernelversion	  - Output the version stored in Makefile'
-	@if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
-	 echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
 	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
-	 fi
-	@echo  ''
+	 echo  ''
 	@echo  'Static analysers'
 	@echo  '  checkstack      - Generate a list of stack hogs'
 	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
 	@echo  '  versioncheck    - Sanity check on version.h usage'
 	@echo  '  includecheck    - Check for duplicate included header files'
 	@echo  '  export_report   - List the usages of all exported symbols'
-	@if [ -r $(srctree)/include/asm-$(SRCARCH)/Kbuild ]; then \
-	 echo  '  headers_check   - Sanity check on exported headers'; \
-	 fi
-	@echo  ''
+	@echo  '  headers_check   - Sanity check on exported headers'; \
+	 echo  ''
 	@echo  'Kernel packaging:'
 	@$(MAKE) $(build)=$(package-dir) help
 	@echo  ''
diff --git a/scripts/headers.sh b/scripts/headers.sh
new file mode 100755
index 00000000000..d33426f866d
--- /dev/null
+++ b/scripts/headers.sh
@@ -0,0 +1,41 @@
+#!/bin/sh
+# Run headers_$1 command for all suitable architectures
+
+# Stop on error
+set -e
+
+do_command()
+{
+	if [ -f ${srctree}/arch/$2/include/asm/Kbuild ]; then
+		make ARCH=$2 KBUILD_HEADERS=$1 headers_$1
+	elif [ -f ${srctree}/include/asm-$2/Kbuild ]; then
+		make ARCH=$2 KBUILD_HEADERS=$1 headers_$1
+	else
+		printf "Ignoring arch: %s\n" ${arch}
+	fi
+}
+
+# Do not try this architecture
+drop="generic um ppc sparc64 cris"
+
+archs=$(ls ${srctree}/arch)
+
+for arch in ${archs}; do
+	case ${arch} in
+	um)        # no userspace export
+		;;
+	ppc)       # headers exported by powerpc
+		;;
+	sparc64)   # headers exported by sparc
+		;;
+	cris)      # headers export are known broken
+		;;
+	*)
+		if [ -d ${srctree}/arch/${arch} ]; then
+			do_command $1 ${arch}
+		fi
+		;;
+	esac
+done
+
+
-- 
cgit v1.2.3


From a53ce098a763a33311b60c53161572f5789d5594 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 22 Jun 2008 21:41:13 +0200
Subject: kbuild: support arch/$ARCH/include for tags, cscope

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Makefile | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index c5ab2b8a138..ad0533b9a0d 100644
--- a/Makefile
+++ b/Makefile
@@ -1416,7 +1416,11 @@ define find-sources
 	       \( -name config -o -name 'asm-*' \) -prune \
 	       -o -name $1 -print; \
 	  for arch in $(ALLINCLUDE_ARCHS) ; do \
-	       find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \
+	       test -e $(__srctree)include/asm-$${arch} && \
+                 find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \
+	            -name $1 -print; \
+	       test -e $(__srctree)arch/$${arch}/include/asm && \
+	         find $(__srctree)arch/$${arch}/include/asm $(RCS_FIND_IGNORE) \
 	            -name $1 -print; \
 	  done ; \
 	  find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
-- 
cgit v1.2.3


From 2e57d051160dd61776461637f767df19036b1186 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 22 Jun 2008 21:42:06 +0200
Subject: kbuild: asm symlink support for arch/$ARCH/include

Adjust the asm symlink support so we do not create the
symlink unless really needed.
We check the precense of include/asm-$ARCH by checking
for the system.h file. We may end up with a stale directory
so it is not enough to check if the directory is present.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Kbuild   |  3 +--
 Makefile | 42 ++++++++++++++++++++++++++++--------------
 2 files changed, 29 insertions(+), 16 deletions(-)

diff --git a/Kbuild b/Kbuild
index e750e9c3fe5..f056b4feee5 100644
--- a/Kbuild
+++ b/Kbuild
@@ -43,7 +43,7 @@ $(obj)/$(bounds-file): kernel/bounds.s Kbuild
 # 2) Generate asm-offsets.h
 #
 
-offsets-file := include/asm-$(SRCARCH)/asm-offsets.h
+offsets-file := include/asm/asm-offsets.h
 
 always  += $(offsets-file)
 targets += $(offsets-file)
@@ -81,7 +81,6 @@ arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
 	$(call if_changed_dep,cc_s_c)
 
 $(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild
-	$(Q)mkdir -p $(dir $@)
 	$(call cmd,offsets)
 
 #####
diff --git a/Makefile b/Makefile
index ad0533b9a0d..f6fcad704d2 100644
--- a/Makefile
+++ b/Makefile
@@ -925,7 +925,9 @@ ifneq ($(KBUILD_SRC),)
 		/bin/false; \
 	fi;
 	$(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
-	$(Q)ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm
+	$(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/system.h ]; then  \
+	    ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm;     \
+	    fi
 endif
 
 # prepare2 creates a makefile if using a separate output directory
@@ -951,22 +953,34 @@ export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
 
 # The asm symlink changes when $(ARCH) changes.
 # Detect this and ask user to run make mrproper
-
-include/asm: FORCE
-	$(Q)set -e; asmlink=`readlink include/asm | cut -d '-' -f 2`;   \
-	if [ -L include/asm ]; then                                     \
-		if [ "$$asmlink" != "$(SRCARCH)" ]; then                \
+define check-symlink
+	set -e;                                                            \
+	if [ -L include/asm ]; then                                        \
+		asmlink=`readlink include/asm | cut -d '-' -f 2`;          \
+		if [ "$$asmlink" != "$(SRCARCH)" ]; then                   \
 			echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \
 			echo "       set ARCH or save .config and run 'make mrproper' to fix it";             \
-			exit 1;                                         \
-		fi;                                                     \
-	else                                                            \
-		echo '  SYMLINK $@ -> include/asm-$(SRCARCH)';          \
-		if [ ! -d include ]; then                               \
-			mkdir -p include;                               \
-		fi;                                                     \
-		ln -fsn asm-$(SRCARCH) $@;                              \
+			exit 1;                                            \
+		fi;                                                        \
+	fi
+endef
+
+# We create the target directory of the symlink if it does
+# not exist so the test in chack-symlink works and we have a
+# directory for generated filesas used by some architectures.
+define create-symlink
+	if [ ! -L include/asm ]; then                                      \
+			echo '  SYMLINK $@ -> include/asm-$(SRCARCH)';     \
+			if [ ! -d include/asm-$(SRCARCH) ]; then           \
+				mkdir -p include/asm-$(SRCARCH);           \
+			fi;                                                \
+			ln -fsn asm-$(SRCARCH) $@;                         \
 	fi
+endef
+
+include/asm: FORCE
+	$(Q)$(check-symlink)
+	$(Q)$(create-symlink)
 
 # Generate some files
 # ---------------------------------------------------------------------------
-- 
cgit v1.2.3


From 5e4786f75d885dd1a5f9fe12f3385ece7656b0c9 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 22 Jun 2008 21:48:26 +0200
Subject: kbuild: add arch/$ARCH/include to search path

This patch conclude the support for

   arch/$ARCH/include

Note: The individual architectures will most likely require
      a few minor patches to support locating header files in
      arch/$ARCH/include

Testing shows that it worked out-of-the-box for sparc.
x86 required a few trivial changes in the arch
specific Makefile and a few include paths had to be adjusted.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index f6fcad704d2..828c838e025 100644
--- a/Makefile
+++ b/Makefile
@@ -329,7 +329,8 @@ AFLAGS_KERNEL	=
 # Needed to be compatible with the O= option
 LINUXINCLUDE    := -Iinclude \
                    $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
-		   -include include/linux/autoconf.h
+                   -I$(srctree)/arch/$(hdr-arch)/include               \
+                   -include include/linux/autoconf.h
 
 KBUILD_CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
 
-- 
cgit v1.2.3


From 37a4c940749670671adab211a2d9c9fed9f3f757 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?S=2E=C3=87a=C4=9Flar=20Onur?= <caglar@pardus.org.tr>
Date: Wed, 18 Jun 2008 11:45:13 +0300
Subject: init: fix URL of "The GNU Accounting Utilities"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Following patch corrects URL of "The GNU Accounting Utilities" in init/Kconfig.

Noticed by: Bart Van Assche" <bart.vanassche@gmail.com>

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 init/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/init/Kconfig b/init/Kconfig
index a50bdfed2df..bcbe06426fa 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -171,7 +171,7 @@ config BSD_PROCESS_ACCT_V3
 	  process and it's parent. Note that this file format is incompatible
 	  with previous v0/v1/v2 file formats, so you will need updated tools
 	  for processing it. A preliminary version of these tools is available
-	  at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
+	  at <http://www.gnu.org/software/acct/>.
 
 config TASKSTATS
 	bool "Export task/process statistics through netlink (EXPERIMENTAL)"
-- 
cgit v1.2.3


From fb5e2b379732e1a6ea32392980bb42e0212db842 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Wed, 18 Jun 2008 12:36:01 +0100
Subject: vmlinux.lds: move __attribute__((__cold__)) functions back into final
 .text section

Due to the addition of __attribute__((__cold__)) to a few symbols
without adjusting the linker scripts, those symbols currently may end
up outside the [_stext,_etext) range, as they get placed in
.text.unlikely by (at least) gcc 4.3.0. This may confuse code not only
outside of the kernel, symbol_put_addr()'s BUG() could also trigger.
Hence we need to add .text.unlikely (and for future uses of
__attribute__((__hot__)) also .text.hot) to the TEXT_TEXT() macro.

Issue observed by Lukas Lipavsky.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Tested-by: Lukas Lipavsky <llipavsky@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 include/asm-generic/vmlinux.lds.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 729f6b0a60e..bd2be5fd127 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -221,6 +221,7 @@
  * during second ld run in second ld pass when generating System.map */
 #define TEXT_TEXT							\
 		ALIGN_FUNCTION();					\
+		*(.text.hot)						\
 		*(.text)						\
 		*(.ref.text)						\
 		*(.text.init.refok)					\
@@ -230,7 +231,8 @@
 	CPU_KEEP(init.text)						\
 	CPU_KEEP(exit.text)						\
 	MEM_KEEP(init.text)						\
-	MEM_KEEP(exit.text)
+	MEM_KEEP(exit.text)						\
+		*(.text.unlikely)
 
 
 /* sched.text is aling to function alignment to secure we have same
-- 
cgit v1.2.3


From 74fc5c653c5d0f9d4d70499709a68e61c4acf991 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 19 Jun 2008 16:03:29 -0700
Subject: kernel-doc: handle/strip __init

Handle __init in functions with kernel-doc notation by stripping the
__init away from the output doc.  This is already being done for
"__devinit".  This patch fixes these kernel-doc error/aborts:

Error(linux-next-20080619//drivers/usb/gadget/config.c:132): cannot understand prototype: 'struct usb_descriptor_header **__init usb_copy_descriptors(struct usb_descriptor_header **src) '
Error(linux-next-20080619//drivers/usb/gadget/config.c:182): cannot understand prototype: 'struct usb_endpoint_descriptor *__init usb_find_endpoint( 	struct usb_descriptor_header **src, 	struct usb_descriptor_header **copy, 	struct usb_endpoint_descriptor *match ) '

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/kernel-doc | 1 +
 1 file changed, 1 insertion(+)

diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 88e3934a8b8..d8f77e26081 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1643,6 +1643,7 @@ sub dump_function($$) {
     $prototype =~ s/^__always_inline +//;
     $prototype =~ s/^noinline +//;
     $prototype =~ s/__devinit +//;
+    $prototype =~ s/__init +//;
     $prototype =~ s/^#define\s+//; #ak added
     $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
 
-- 
cgit v1.2.3


From a887a07d51be6c7cd2c4c373cd17273158d6a85d Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Date: Fri, 20 Jun 2008 15:45:12 +0200
Subject: kbuild: sparse needs CF not CHECKFLAGS

Documentation/sparse.txt tells to use:

    make C=2 CHECKFLAGS="-D__CHECK_ENDIAN__"

However, this still doesn't enable endian checks. The correct syntax is:

    make C=2 CF="-D__CHECK_ENDIAN__"

This documentation bug was introduced by the following commit:

    commit 1c7bafe7206d928eaccbcbd08d868733e0fb7054
    Author: Robert P. J. Day <rpjday@mindspring.com>
    Date:   Wed Sep 13 07:57:50 2006 -0400

	kbuild: clarify "make C=" build option

	Clarify the use of "make C=" in the top-level Makefile, and fix a
	typo in the Documentation file.

	Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

This `typo' was not a typo, as `CF' had been introduced much earlier, by:

    commit 7b49bb9aff8b14d15da58111d8908c877c0a525e
    Author: viro@ZenIV.linux.org.uk <viro@ZenIV.linux.org.uk>
    Date:   Fri Sep 9 21:14:35 2005 +0100

	[PATCH] kbuild: CF=<arguments> passes arguments to sparse

	Allows to add to sparse arguments without mutilating makefiles - just
	pass CF=<arguments> and they will be added to CHECKFLAGS.

    Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
    Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Documentation/sparse.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt
index 1a3bdc27d95..42f43fa59f2 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/sparse.txt
@@ -73,10 +73,10 @@ recompiled, or use "make C=2" to run sparse on the files whether they need to
 be recompiled or not.  The latter is a fast way to check the whole tree if you
 have already built it.
 
-The optional make variable CHECKFLAGS can be used to pass arguments to sparse.
-The build system passes -Wbitwise to sparse automatically.  To perform
-endianness checks, you may define __CHECK_ENDIAN__:
+The optional make variable CF can be used to pass arguments to sparse.  The
+build system passes -Wbitwise to sparse automatically.  To perform endianness
+checks, you may define __CHECK_ENDIAN__:
 
-        make C=2 CHECKFLAGS="-D__CHECK_ENDIAN__"
+        make C=2 CF="-D__CHECK_ENDIAN__"
 
 These checks are disabled by default as they generate a host of warnings.
-- 
cgit v1.2.3


From c28ca3aaa1f08877ac0da7efcfead71a08490d65 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Mon, 23 Jun 2008 04:05:40 +0400
Subject: kbuild: remove Module.markers during mrproper

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 828c838e025..b4a52d218f9 100644
--- a/Makefile
+++ b/Makefile
@@ -1155,7 +1155,7 @@ MRPROPER_FILES += .config .config.old include/asm .version .old_version \
                   include/linux/autoconf.h include/linux/version.h      \
                   include/linux/utsrelease.h                            \
                   include/linux/bounds.h include/asm*/asm-offsets.h     \
-		  Module.symvers tags TAGS cscope*
+		  Module.symvers Module.markers tags TAGS cscope*
 
 # clean - Delete most, but leave enough to build external modules
 #
-- 
cgit v1.2.3


From a717417e7f96ad2c6c3d80cdd0836e49597399a3 Mon Sep 17 00:00:00 2001
From: Tim Bird <tim.bird@am.sony.com>
Date: Tue, 24 Jun 2008 10:56:06 -0700
Subject: kconfig: add diffconfig utility

Diffconfig is a simple utility for comparing two kernel configuration files.
See usage in the script for more info.

Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/diffconfig | 129 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 129 insertions(+)
 create mode 100755 scripts/diffconfig

diff --git a/scripts/diffconfig b/scripts/diffconfig
new file mode 100755
index 00000000000..b91f3e34d44
--- /dev/null
+++ b/scripts/diffconfig
@@ -0,0 +1,129 @@
+#!/usr/bin/python
+#
+# diffconfig - a tool to compare .config files.
+#
+# originally written in 2006 by Matt Mackall
+#  (at least, this was in his bloatwatch source code)
+# last worked on 2008 by Tim Bird
+#
+
+import sys, os
+
+def usage():
+    print """Usage: diffconfig [-h] [-m] [<config1> <config2>]
+
+Diffconfig is a simple utility for comparing two .config files.
+Using standard diff to compare .config files often includes extraneous and
+distracting information.  This utility produces sorted output with only the
+changes in configuration values between the two files.
+
+Added and removed items are shown with a leading plus or minus, respectively.
+Changed items show the old and new values on a single line.
+
+If -m is specified, then output will be in "merge" style, which has the
+changed and new values in kernel config option format.
+
+If no config files are specified, .config and .config.old are used.
+
+Example usage:
+ $ diffconfig .config config-with-some-changes
+-EXT2_FS_XATTR  n
+-EXT2_FS_XIP  n
+ CRAMFS  n -> y
+ EXT2_FS  y -> n
+ LOG_BUF_SHIFT  14 -> 16
+ PRINTK_TIME  n -> y
+"""
+    sys.exit(0)
+
+# returns a dictionary of name/value pairs for config items in the file
+def readconfig(config_file):
+    d = {}
+    for line in config_file:
+        line = line[:-1]
+        if line[:7] == "CONFIG_":
+            name, val = line[7:].split("=", 1)
+            d[name] = val
+        if line[-11:] == " is not set":
+            d[line[9:-11]] = "n"
+    return d
+
+def print_config(op, config, value, new_value):
+    global merge_style
+
+    if merge_style:
+        if new_value:
+            if new_value=="n":
+                print "# CONFIG_%s is not set" % config
+            else:
+                print "CONFIG_%s=%s" % (config, new_value)
+    else:
+        if op=="-":
+            print "-%s %s" % (config, value)
+        elif op=="+":
+            print "+%s %s" % (config, new_value)
+        else:
+            print " %s %s -> %s" % (config, value, new_value)
+
+def main():
+    global merge_style
+
+    # parse command line args
+    if ("-h" in sys.argv or "--help" in sys.argv):
+	usage()
+
+    merge_style = 0
+    if "-m" in sys.argv:
+        merge_style = 1
+        sys.argv.remove("-m")
+
+    argc = len(sys.argv)
+    if not (argc==1 or argc == 3):
+        print "Error: incorrect number of arguments or unrecognized option"
+        usage()
+
+    if argc == 1:
+        # if no filenames given, assume .config and .config.old
+        build_dir=""
+        if os.environ.has_key("KBUILD_OUTPUT"):
+            build_dir = os.environ["KBUILD_OUTPUT"]+"/"
+
+        configa_filename = build_dir + ".config.old"
+        configb_filename = build_dir + ".config"
+    else:
+        configa_filename = sys.argv[1]
+        configb_filename = sys.argv[2]
+
+    a = readconfig(file(configa_filename))
+    b = readconfig(file(configb_filename))
+
+    # print items in a but not b (accumulate, sort and print)
+    old = []
+    for config in a:
+        if config not in b:
+            old.append(config)
+    old.sort()
+    for config in old:
+        print_config("-", config, a[config], None)
+        del a[config]
+
+    # print items that changed (accumulate, sort, and print)
+    changed = []
+    for config in a:
+        if a[config] != b[config]:
+            changed.append(config)
+        else:
+            del b[config]
+    changed.sort()
+    for config in changed:
+        print_config("->", config, a[config], b[config])
+        del b[config]
+
+    # now print items in b but not in a
+    # (items from b that were in a were removed above)
+    new = b.keys()
+    new.sort()
+    for config in new:
+        print_config("+", config, None, b[config])
+
+main()
-- 
cgit v1.2.3


From dc7862e5a65b9b9e0aad448398b4f652c49c9350 Mon Sep 17 00:00:00 2001
From: Roman Zippel <zippel@linux-m68k.org>
Date: Tue, 6 May 2008 04:55:55 +0200
Subject: kconfig: set all new symbols automatically

Add conf_set_all_new_symbols() which set all symbols (which don't have a
value yet) to a specifed value.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/kconfig/confdata.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++
 scripts/kconfig/lkc.h      |  9 ++++++
 2 files changed, 79 insertions(+)

diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index ee5fe943d58..07597611cc5 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -812,3 +812,73 @@ void conf_set_changed_callback(void (*fn)(void))
 {
 	conf_changed_callback = fn;
 }
+
+
+void conf_set_all_new_symbols(enum conf_def_mode mode)
+{
+	struct symbol *sym, *csym;
+	struct property *prop;
+	struct expr *e;
+	int i, cnt, def;
+
+	for_all_symbols(i, sym) {
+		if (sym_has_value(sym))
+			continue;
+		switch (sym_get_type(sym)) {
+		case S_BOOLEAN:
+		case S_TRISTATE:
+			switch (mode) {
+			case def_yes:
+				sym->def[S_DEF_USER].tri = yes;
+				break;
+			case def_mod:
+				sym->def[S_DEF_USER].tri = mod;
+				break;
+			case def_no:
+				sym->def[S_DEF_USER].tri = no;
+				break;
+			case def_random:
+				sym->def[S_DEF_USER].tri = (tristate)(rand() % 3);
+				break;
+			default:
+				continue;
+			}
+			if (!sym_is_choice(sym) || mode != def_random)
+				sym->flags |= SYMBOL_DEF_USER;
+			break;
+		default:
+			break;
+		}
+
+	}
+
+	if (modules_sym)
+		sym_calc_value(modules_sym);
+
+	if (mode != def_random)
+		return;
+
+	for_all_symbols(i, csym) {
+		if (sym_has_value(csym) || !sym_is_choice(csym))
+			continue;
+
+		sym_calc_value(csym);
+		prop = sym_get_choice_prop(csym);
+		def = -1;
+		while (1) {
+			cnt = 0;
+			expr_list_for_each_sym(prop->expr, e, sym) {
+				if (sym->visible == no)
+					continue;
+				if (def == cnt++) {
+					csym->def[S_DEF_USER].val = sym;
+					break;
+				}
+			}
+			if (def >= 0 || cnt < 2)
+				break;
+			def = (rand() % cnt) + 1;
+		}
+		csym->flags |= SYMBOL_DEF_USER;
+	}
+}
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 96521cb087e..4a9af6f7886 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -42,6 +42,14 @@ extern "C" {
 #define TF_PARAM	0x0002
 #define TF_OPTION	0x0004
 
+enum conf_def_mode {
+	def_default,
+	def_yes,
+	def_mod,
+	def_no,
+	def_random
+};
+
 #define T_OPT_MODULES		1
 #define T_OPT_DEFCONFIG_LIST	2
 #define T_OPT_ENV		3
@@ -69,6 +77,7 @@ const char *conf_get_configname(void);
 char *conf_get_default_confname(void);
 void sym_set_change_count(int count);
 void sym_add_change_count(int count);
+void conf_set_all_new_symbols(enum conf_def_mode mode);
 
 /* kconfig_load.c */
 void kconfig_load(void);
-- 
cgit v1.2.3


From f443d2eccf077afd8a839cc7ed66cc4d520c5f05 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 30 Jun 2008 22:45:38 +0200
Subject: kconfig: speed up all*config + randconfig

Drop the chatty mode when we generate the all*config, randconfig
configurations.
Ths speeds up the process considerably and noone looked
at the output anyway.
This patch uses the conf_set_all_new_symbols() function
just added to kconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
---
 scripts/kconfig/conf.c | 154 ++++++++++++++++++++++---------------------------
 1 file changed, 68 insertions(+), 86 deletions(-)

diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index fda63136ae6..bd2a27e1967 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -76,7 +76,6 @@ static void check_stdin(void)
 static int conf_askvalue(struct symbol *sym, const char *def)
 {
 	enum symbol_type type = sym_get_type(sym);
-	tristate val;
 
 	if (!sym_has_value(sym))
 		printf(_("(NEW) "));
@@ -92,15 +91,6 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 	}
 
 	switch (input_mode) {
-	case set_no:
-	case set_mod:
-	case set_yes:
-	case set_random:
-		if (sym_has_value(sym)) {
-			printf("%s\n", def);
-			return 0;
-		}
-		break;
 	case ask_new:
 	case ask_silent:
 		if (sym_has_value(sym)) {
@@ -128,52 +118,6 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 	default:
 		;
 	}
-	switch (input_mode) {
-	case set_yes:
-		if (sym_tristate_within_range(sym, yes)) {
-			line[0] = 'y';
-			line[1] = '\n';
-			line[2] = 0;
-			break;
-		}
-	case set_mod:
-		if (type == S_TRISTATE) {
-			if (sym_tristate_within_range(sym, mod)) {
-				line[0] = 'm';
-				line[1] = '\n';
-				line[2] = 0;
-				break;
-			}
-		} else {
-			if (sym_tristate_within_range(sym, yes)) {
-				line[0] = 'y';
-				line[1] = '\n';
-				line[2] = 0;
-				break;
-			}
-		}
-	case set_no:
-		if (sym_tristate_within_range(sym, no)) {
-			line[0] = 'n';
-			line[1] = '\n';
-			line[2] = 0;
-			break;
-		}
-	case set_random:
-		do {
-			val = (tristate)(rand() % 3);
-		} while (!sym_tristate_within_range(sym, val));
-		switch (val) {
-		case no: line[0] = 'n'; break;
-		case mod: line[0] = 'm'; break;
-		case yes: line[0] = 'y'; break;
-		}
-		line[1] = '\n';
-		line[2] = 0;
-		break;
-	default:
-		break;
-	}
 	printf("%s", line);
 	return 1;
 }
@@ -374,16 +318,12 @@ static int conf_choice(struct menu *menu)
 			else
 				continue;
 			break;
-		case set_random:
-			if (is_new)
-				def = (rand() % cnt) + 1;
 		case set_default:
-		case set_yes:
-		case set_mod:
-		case set_no:
 			cnt = def;
 			printf("%d\n", cnt);
 			break;
+		default:
+			break;
 		}
 
 	conf_childs:
@@ -494,6 +434,43 @@ static void check_conf(struct menu *menu)
 		check_conf(child);
 }
 
+static void conf_do_update(void)
+{
+	/* Update until a loop caused no more changes */
+	do {
+		conf_cnt = 0;
+		check_conf(&rootmenu);
+	} while (conf_cnt);
+}
+
+static int conf_silent_update(void)
+{
+	const char *name;
+
+	if (conf_get_changed()) {
+		name = getenv("KCONFIG_NOSILENTUPDATE");
+		if (name && *name) {
+			fprintf(stderr,
+			_("\n*** Kernel configuration requires explicit update.\n\n"));
+			return 1;
+		}
+		conf_do_update();
+	}
+	return 0;
+}
+
+static int conf_update(void)
+{
+	rootEntry = &rootmenu;
+	conf(&rootmenu);
+	if (input_mode == ask_all) {
+		input_mode = ask_silent;
+		valid_stdin = 1;
+	}
+	conf_do_update();
+	return 0;
+}
+
 int main(int ac, char **av)
 {
 	int opt;
@@ -599,36 +576,41 @@ int main(int ac, char **av)
 	default:
 		break;
 	}
+	switch (input_mode) {
+	case set_no:
+		conf_set_all_new_symbols(def_no);
+		break;
+	case set_yes:
+		conf_set_all_new_symbols(def_yes);
+		break;
+	case set_mod:
+		conf_set_all_new_symbols(def_mod);
+		break;
+	case set_random:
+		conf_set_all_new_symbols(def_random);
+		break;
+	case ask_silent:
+		if (conf_silent_update())
+			exit(1);
+		break;
+	case ask_new:
+	case ask_all:
+	case set_default:
+		if (conf_update())
+			exit(1);
+		break;
+	}
 
-	if (input_mode != ask_silent) {
-		rootEntry = &rootmenu;
-		conf(&rootmenu);
-		if (input_mode == ask_all) {
-			input_mode = ask_silent;
-			valid_stdin = 1;
-		}
-	} else if (conf_get_changed()) {
-		name = getenv("KCONFIG_NOSILENTUPDATE");
-		if (name && *name) {
-			fprintf(stderr, _("\n*** Kernel configuration requires explicit update.\n\n"));
-			return 1;
-		}
-	} else
-		goto skip_check;
-
-	do {
-		conf_cnt = 0;
-		check_conf(&rootmenu);
-	} while (conf_cnt);
-	if (conf_write(NULL)) {
+	if (conf_get_changed() && conf_write(NULL)) {
 		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
-		return 1;
+		exit(1);
 	}
-skip_check:
+	/* ask_silent is used during the build so we shall update autoconf.
+	 * All other commands are only used to generate a config.
+	 */
 	if (input_mode == ask_silent && conf_write_autoconf()) {
 		fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
 		return 1;
 	}
-
 	return 0;
 }
-- 
cgit v1.2.3


From cd9140e1e73a31fd45f1fd4585260643a2f9ab1d Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 30 Jun 2008 22:53:04 +0200
Subject: kconfig: make oldconfig is now less chatty

Previously when running "make oldconfig" we saw all the propmt lines
from kconfig and noone actully read this.

With this patch the user will only see output if there is new symbols.
This will be seen as "make oldconfig" runs which does not generate any output.

A typical run now looks like this:

$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
$

If a new symbol is found then we restart the config process like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*
* Restart config...
*
*
* General setup
*
Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y
Local version - append to kernel release (LOCALVERSION) []
...

The bahaviour is similar to what we know when running the implicit
oldconfig target "make silentoldconfig".
"make silentoldconfig" are run as part of the kernel build process
if the configuration has changed.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
---
 scripts/kconfig/conf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index bd2a27e1967..6cdaa0cc572 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -590,10 +590,10 @@ int main(int ac, char **av)
 		conf_set_all_new_symbols(def_random);
 		break;
 	case ask_silent:
+	case ask_new:
 		if (conf_silent_update())
 			exit(1);
 		break;
-	case ask_new:
 	case ask_all:
 	case set_default:
 		if (conf_update())
-- 
cgit v1.2.3


From 09748e178b6cb8d3b8a748d0159aa7ad8eadcbe1 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 30 Jun 2008 23:02:59 +0200
Subject: kconfig: make defconfig is no longer chatty

make defconfig generated a lot of output
then noone actually read.
Use conf_set_all_new_symbols() to generate the default
configuration and avoid the chatty output.

A typical run now looks like this:
$ make  defconfig
*** Default configuration is based on 'i386_defconfig'
arch/x86/configs/i386_defconfig:13:warning: trying to assign nonexistent symbol SEMAPHORE_SLEEPERS
arch/x86/configs/i386_defconfig:176:warning: trying to assign nonexistent symbol PREEMPT_BKL
...
arch/x86/configs/i386_defconfig:1386:warning: trying to assign nonexistent symbol INSTRUMENTATION
$

As an added benefit we now clearly see the warnings generated
in the start of the process.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
---
 scripts/kconfig/conf.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 6cdaa0cc572..9fba838c706 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -102,9 +102,6 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 		fflush(stdout);
 		fgets(line, 128, stdin);
 		return 1;
-	case set_default:
-		printf("%s\n", def);
-		return 1;
 	default:
 		break;
 	}
@@ -318,10 +315,6 @@ static int conf_choice(struct menu *menu)
 			else
 				continue;
 			break;
-		case set_default:
-			cnt = def;
-			printf("%d\n", cnt);
-			break;
 		default:
 			break;
 		}
@@ -589,13 +582,15 @@ int main(int ac, char **av)
 	case set_random:
 		conf_set_all_new_symbols(def_random);
 		break;
+	case set_default:
+		conf_set_all_new_symbols(def_default);
+		break;
 	case ask_silent:
 	case ask_new:
 		if (conf_silent_update())
 			exit(1);
 		break;
 	case ask_all:
-	case set_default:
 		if (conf_update())
 			exit(1);
 		break;
-- 
cgit v1.2.3


From 12d2b8f951063076c7e0acdff7ae1fecd54920a0 Mon Sep 17 00:00:00 2001
From: Heikki Orsila <heikki.orsila@iki.fi>
Date: Sun, 6 Jul 2008 15:48:02 +0300
Subject: kconfig: fix typos: "Suport" -> "Support"

Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 drivers/misc/Kconfig | 2 +-
 init/Kconfig         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 321eb913463..f5ade1904aa 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -360,7 +360,7 @@ config THINKPAD_ACPI_VIDEO
 	  If you are not sure, say Y here.
 
 config THINKPAD_ACPI_HOTKEY_POLL
-	bool "Suport NVRAM polling for hot keys"
+	bool "Support NVRAM polling for hot keys"
 	depends on THINKPAD_ACPI
 	default y
 	---help---
diff --git a/init/Kconfig b/init/Kconfig
index bcbe06426fa..43d6989c275 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -486,7 +486,7 @@ config PID_NS
 	default n
 	depends on NAMESPACES && EXPERIMENTAL
 	help
-	  Suport process id namespaces.  This allows having multiple
+	  Support process id namespaces.  This allows having multiple
 	  process with the same pid as long as they are in different
 	  pid namespaces.  This is a building block of containers.
 
-- 
cgit v1.2.3


From 56b2f0706d82535fd8d85503f2dcc0be40c8e55d Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <lkml@ml.breakpoint.cc>
Date: Wed, 2 Jul 2008 00:18:08 +0200
Subject: setlocalversion: do not describe if there is nothing to describe

Jan Engelhardt wrote:
> Just a note that when you run git-describe, you should probably quiten it.
>
> fatal: cannot describe 'bd7364a0fd5a4a2878fe4a224be1b142a4e6698e'
>
> This happens when tags are not present, which can happen if Linus's tree
> is sent upwards again, IOW:
>
>  machine1$  git-clone torvalds/linux-2.6.git
>  machine1$  git push elsewhere master
>
>  machine2$  git-clone elsewhere:/linux
>  machine2$  git-describe HEAD
>  fatal: cannot describe that

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Acked-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 scripts/setlocalversion | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 1c1bdaf7348..83b75126c9f 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -12,7 +12,9 @@ cd "${1:-.}" || usage
 if head=`git rev-parse --verify HEAD 2>/dev/null`; then
 	# Do we have an untagged version?
 	if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
-	        git describe | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+		if tag=`git describe 2>/dev/null`; then
+			echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+		fi
 	fi
 
 	# Are there uncommitted changes?
-- 
cgit v1.2.3


From f1373da87be917e5b2356af44764620487376a07 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 25 Jul 2008 15:18:31 -0700
Subject: sparc: Wire up new system calls.

This wires up the recently added Wire up signalfd4, eventfd2,
epoll_create1, dup3, pipe2, and inotify_init1 system calls.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/systbls.S   | 3 ++-
 arch/sparc64/kernel/systbls.S | 6 ++++--
 include/asm-sparc/unistd_32.h | 8 +++++++-
 include/asm-sparc/unistd_64.h | 8 +++++++-
 4 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 5a7c4c8345c..e1b9233b90a 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -80,4 +80,5 @@ sys_call_table:
 /*300*/	.long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 /*305*/	.long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime
+/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 8b5282d433c..1095bf4c510 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -81,7 +81,8 @@ sys_call_table32:
 /*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages, compat_sys_mbind, compat_sys_get_mempolicy
 	.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
-	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime
+	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
 
 #endif /* CONFIG_COMPAT */
 
@@ -154,4 +155,5 @@ sys_call_table:
 /*300*/	.word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 	.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-	.word sys_timerfd_settime, sys_timerfd_gettime
+	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/include/asm-sparc/unistd_32.h b/include/asm-sparc/unistd_32.h
index 2338a027637..648643a9f13 100644
--- a/include/asm-sparc/unistd_32.h
+++ b/include/asm-sparc/unistd_32.h
@@ -332,8 +332,14 @@
 #define __NR_fallocate		314
 #define __NR_timerfd_settime	315
 #define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
 
-#define NR_SYSCALLS		317
+#define NR_SYSCALLS		323
 
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
  * it never had the plain ones and there is no value to adding those
diff --git a/include/asm-sparc/unistd_64.h b/include/asm-sparc/unistd_64.h
index 13be4453a1f..c5cc0e05232 100644
--- a/include/asm-sparc/unistd_64.h
+++ b/include/asm-sparc/unistd_64.h
@@ -334,8 +334,14 @@
 #define __NR_fallocate		314
 #define __NR_timerfd_settime	315
 #define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
 
-#define NR_SYSCALLS		317
+#define NR_SYSCALLS		323
 
 #ifdef __KERNEL__
 #define __ARCH_WANT_IPC_PARSE_VERSION
-- 
cgit v1.2.3


From fc532f810832beb3306b42526a78f411972281c7 Mon Sep 17 00:00:00 2001
From: Nathan Lynch <ntl@pobox.com>
Date: Fri, 25 Jul 2008 17:50:30 -0500
Subject: powerpc: Fix boot problem due to AT_BASE_PLATFORM change

Commit 9115d13453dee22473a1e8cacc90a8d64a9c4bc9 ("powerpc: Enable
AT_BASE_PLATFORM aux vector") broke boot on 32-bit powerpc systems; we
have to use PTRRELOC to initialize powerpc_base_platform this early in
boot.

Bug reported by Jon Smirl.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 25a052c1675..25c273c761d 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1660,8 +1660,8 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 			 * Set the base platform string once; assumes
 			 * we're called with real pvr first.
 			 */
-			if (powerpc_base_platform == NULL)
-				powerpc_base_platform = t->platform;
+			if (*PTRRELOC(&powerpc_base_platform) == NULL)
+				*PTRRELOC(&powerpc_base_platform) = t->platform;
 
 #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
 			/* ppc64 and booke expect identify_cpu to also call
-- 
cgit v1.2.3


From b4615e69b6c6353878b734a8202b65efbc554df4 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 25 Jul 2008 13:19:22 -0700
Subject: sys_paccept definition missing __user annotation

Introduced by commit aaca0bdca573f3f51ea03139f9c7289541e7bca3 ("flag
parameters: paccept"):

  net/socket.c:1515:17: error: symbol 'sys_paccept' redeclared with different type (originally declared at include/linux/syscalls.h:413) - incompatible argument 4 (different address spaces)

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/syscalls.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 06f2bf76c03..d6ff145919c 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -411,7 +411,7 @@ asmlinkage long sys_bind(int, struct sockaddr __user *, int);
 asmlinkage long sys_connect(int, struct sockaddr __user *, int);
 asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_paccept(int, struct sockaddr __user *, int __user *,
-			    const sigset_t *, size_t, int);
+			    const __user sigset_t *, size_t, int);
 asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_send(int, void __user *, size_t, unsigned);
-- 
cgit v1.2.3


From 8d25b36b77fe32c296ece83e94ca6ae4d17f3e25 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Sat, 26 Jul 2008 02:38:00 +0300
Subject: MFD_TC6393XB is ARM-only
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Compile error on other architectures:

    CC      drivers/mfd/tc6393xb.o
  /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c: In function ‘tc6393xb_attach_irq’:
  /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c:324: error: implicit declaration of function ‘set_irq_flags’
  ...

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1f57a99fd96..883e7ea31de 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -52,7 +52,7 @@ config HTC_PASIC3
 
 config MFD_TC6393XB
 	bool "Support Toshiba TC6393XB"
-	depends on GPIOLIB
+	depends on GPIOLIB && ARM
 	select MFD_CORE
 	help
 	  Support for Toshiba Mobile IO Controller TC6393XB
-- 
cgit v1.2.3


From 024e8ac04453b3525448c31ef39848cf675ba6db Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 20:00:10 -0700
Subject: x86_64: fix ia32 AMD syscall audit fast-path

The new code in commit 5cbf1565f29eb57a86a305b08836613508e294d7
has a bug in the version supporting the AMD 'syscall' instruction.
It clobbers the user's %ecx register value (with the %ebp value).

This change fixes it.

Signed-off-by: Roland McGrath <roland@redhat.com>
---
 arch/x86/ia32/ia32entry.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index e4bd1793a5e..ffc1bb4fed7 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -201,7 +201,7 @@ sysexit_from_sys_call:
 	movl RDI-ARGOFFSET(%rsp),%r8d	/* reload 5th syscall arg */
 	.endm
 
-	.macro auditsys_exit exit
+	.macro auditsys_exit exit,ebpsave=RBP
 	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
 	jnz int_ret_from_sys_call
 	TRACE_IRQS_ON
@@ -214,7 +214,7 @@ sysexit_from_sys_call:
 	call audit_syscall_exit
 	GET_THREAD_INFO(%r10)
 	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall return value */
-	movl RBP-ARGOFFSET(%rsp),%ebp	/* reload user register value */
+	movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */
 	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
 	cli
 	TRACE_IRQS_OFF
@@ -347,7 +347,7 @@ cstar_auditsys:
 	jmp cstar_dispatch
 
 sysretl_audit:
-	auditsys_exit sysretl_from_sys_call
+	auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */
 #endif
 
 cstar_tracesys:
-- 
cgit v1.2.3


From 53e5e96ec18da6f65e89f05674711e1c93d8df67 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Fri, 25 Jul 2008 21:40:45 -0700
Subject: drivers/net: convert BUG_TRAP to generic WARN_ON
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Removes legacy reinvent-the-wheel type thing. The generic
machinery integrates much better to automated debugging aids
such as kerneloops.org (and others), and is unambiguous due to
better naming. Non-intuively BUG_TRAP() is actually equal to
WARN_ON() rather than BUG_ON().

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 0263bef9cc6..93c95037c19 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -814,7 +814,7 @@ static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	}
 
 	/* release skb */
-	BUG_TRAP(skb);
+	WARN_ON(!skb);
 	dev_kfree_skb(skb);
 	tx_buf->first_bd = 0;
 	tx_buf->skb = NULL;
@@ -837,9 +837,9 @@ static inline u16 bnx2x_tx_avail(struct bnx2x_fastpath *fp)
 	used = SUB_S16(prod, cons) + (s16)NUM_TX_RINGS;
 
 #ifdef BNX2X_STOP_ON_ERROR
-	BUG_TRAP(used >= 0);
-	BUG_TRAP(used <= fp->bp->tx_ring_size);
-	BUG_TRAP((fp->bp->tx_ring_size - used) <= MAX_TX_AVAIL);
+	WARN_ON(used < 0);
+	WARN_ON(used > fp->bp->tx_ring_size);
+	WARN_ON((fp->bp->tx_ring_size - used) > MAX_TX_AVAIL);
 #endif
 
 	return (s16)(fp->bp->tx_ring_size) - used;
@@ -4374,7 +4374,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
 			}
 			ring_prod = NEXT_RX_IDX(ring_prod);
 			cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod);
-			BUG_TRAP(ring_prod > i);
+			WARN_ON(ring_prod <= i);
 		}
 
 		fp->rx_bd_prod = ring_prod;
-- 
cgit v1.2.3


From 547b792cac0a038b9dbf958d3c120df3740b5572 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Fri, 25 Jul 2008 21:43:18 -0700
Subject: net: convert BUG_TRAP to generic WARN_ON
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Removes legacy reinvent-the-wheel type thing. The generic
machinery integrates much better to automated debugging aids
such as kerneloops.org (and others), and is unambiguous due to
better naming. Non-intuively BUG_TRAP() is actually equal to
WARN_ON() rather than BUG_ON() though some might actually be
promoted to BUG_ON() but I left that to future.

I could make at least one BUILD_BUG_ON conversion.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/request_sock.h              |  5 +++--
 net/appletalk/ddp.c                     |  4 ++--
 net/core/datagram.c                     |  8 ++++----
 net/core/dev.c                          | 10 +++++-----
 net/core/request_sock.c                 |  2 +-
 net/core/skbuff.c                       | 20 ++++++++++----------
 net/core/stream.c                       |  6 +++---
 net/core/user_dma.c                     |  5 ++---
 net/dccp/dccp.h                         |  2 +-
 net/dccp/input.c                        |  2 +-
 net/dccp/ipv4.c                         |  2 +-
 net/dccp/ipv6.c                         |  2 +-
 net/dccp/proto.c                        |  4 ++--
 net/dccp/timer.c                        |  2 +-
 net/ipv4/af_inet.c                      | 14 +++++++-------
 net/ipv4/devinet.c                      |  6 +++---
 net/ipv4/inet_connection_sock.c         | 18 +++++++++---------
 net/ipv4/inet_fragment.c                |  4 ++--
 net/ipv4/inet_hashtables.c              |  8 ++++----
 net/ipv4/inet_timewait_sock.c           |  2 +-
 net/ipv4/ip_fragment.c                  |  4 ++--
 net/ipv4/ip_output.c                    |  2 +-
 net/ipv4/tcp.c                          | 12 ++++++------
 net/ipv4/tcp_input.c                    | 20 ++++++++++----------
 net/ipv4/tcp_ipv4.c                     |  2 +-
 net/ipv4/tcp_timer.c                    |  2 +-
 net/ipv6/addrconf.c                     | 11 +++++++----
 net/ipv6/af_inet6.c                     |  2 +-
 net/ipv6/inet6_connection_sock.c        |  2 +-
 net/ipv6/inet6_hashtables.c             |  4 ++--
 net/ipv6/ip6_fib.c                      | 31 ++++++++++++++++---------------
 net/ipv6/ip6_output.c                   |  2 +-
 net/ipv6/mip6.c                         |  8 ++++----
 net/ipv6/netfilter/nf_conntrack_reasm.c |  4 ++--
 net/ipv6/reassembly.c                   |  4 ++--
 net/ipv6/tcp_ipv6.c                     |  2 +-
 net/key/af_key.c                        |  4 ++--
 net/netlink/af_netlink.c                |  7 ++++---
 net/packet/af_packet.c                  |  4 ++--
 net/rxrpc/af_rxrpc.c                    |  6 +++---
 net/sched/act_api.c                     |  2 +-
 net/sched/act_police.c                  |  2 +-
 net/sched/cls_u32.c                     | 10 +++++-----
 net/sched/sch_cbq.c                     |  4 ++--
 net/sched/sch_generic.c                 |  2 +-
 net/sched/sch_htb.c                     | 16 ++++++++--------
 net/sctp/associola.c                    |  2 +-
 net/unix/af_unix.c                      |  8 ++++----
 net/xfrm/xfrm_algo.c                    |  4 ++--
 net/xfrm/xfrm_ipcomp.c                  |  3 +--
 net/xfrm/xfrm_state.c                   |  2 +-
 51 files changed, 159 insertions(+), 155 deletions(-)

diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index 0c96e7bed5d..8d6e991ef4d 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
+#include <linux/bug.h>
 
 #include <net/sock.h>
 
@@ -170,7 +171,7 @@ static inline struct request_sock *reqsk_queue_remove(struct request_sock_queue
 {
 	struct request_sock *req = queue->rskq_accept_head;
 
-	BUG_TRAP(req != NULL);
+	WARN_ON(req == NULL);
 
 	queue->rskq_accept_head = req->dl_next;
 	if (queue->rskq_accept_head == NULL)
@@ -185,7 +186,7 @@ static inline struct sock *reqsk_queue_get_child(struct request_sock_queue *queu
 	struct request_sock *req = reqsk_queue_remove(queue);
 	struct sock *child = req->sk;
 
-	BUG_TRAP(child != NULL);
+	WARN_ON(child == NULL);
 
 	sk_acceptq_removed(parent);
 	__reqsk_free(req);
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 07b5b82c5ea..0c850427a85 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -959,7 +959,7 @@ static unsigned long atalk_sum_skb(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -986,7 +986,7 @@ static unsigned long atalk_sum_skb(const struct sk_buff *skb, int offset,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 8a28fc93b72..dd61dcad601 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -285,7 +285,7 @@ int skb_copy_datagram_iovec(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -315,7 +315,7 @@ int skb_copy_datagram_iovec(const struct sk_buff *skb, int offset,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -366,7 +366,7 @@ static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -402,7 +402,7 @@ static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 		for (; list; list=list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
diff --git a/net/core/dev.c b/net/core/dev.c
index ccf97f9f37e..c6f9c83745e 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1973,7 +1973,7 @@ static void net_tx_action(struct softirq_action *h)
 			struct sk_buff *skb = clist;
 			clist = clist->next;
 
-			BUG_TRAP(!atomic_read(&skb->users));
+			WARN_ON(atomic_read(&skb->users));
 			__kfree_skb(skb);
 		}
 	}
@@ -3847,7 +3847,7 @@ static void rollback_registered(struct net_device *dev)
 		dev->uninit(dev);
 
 	/* Notifier chain MUST detach us from master device. */
-	BUG_TRAP(!dev->master);
+	WARN_ON(dev->master);
 
 	/* Remove entries from kobject tree */
 	netdev_unregister_kobject(dev);
@@ -4169,9 +4169,9 @@ void netdev_run_todo(void)
 
 		/* paranoia */
 		BUG_ON(atomic_read(&dev->refcnt));
-		BUG_TRAP(!dev->ip_ptr);
-		BUG_TRAP(!dev->ip6_ptr);
-		BUG_TRAP(!dev->dn_ptr);
+		WARN_ON(dev->ip_ptr);
+		WARN_ON(dev->ip6_ptr);
+		WARN_ON(dev->dn_ptr);
 
 		if (dev->destructor)
 			dev->destructor(dev);
diff --git a/net/core/request_sock.c b/net/core/request_sock.c
index 2d3035d3abd..7552495aff7 100644
--- a/net/core/request_sock.c
+++ b/net/core/request_sock.c
@@ -123,7 +123,7 @@ void reqsk_queue_destroy(struct request_sock_queue *queue)
 		}
 	}
 
-	BUG_TRAP(lopt->qlen == 0);
+	WARN_ON(lopt->qlen != 0);
 	if (lopt_size > PAGE_SIZE)
 		vfree(lopt);
 	else
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index e4115672b6c..4e0c9227418 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1200,7 +1200,7 @@ int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len)
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -1229,7 +1229,7 @@ int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len)
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -1475,7 +1475,7 @@ int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len)
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + frag->size;
 		if ((copy = end - offset) > 0) {
@@ -1503,7 +1503,7 @@ int skb_store_bits(struct sk_buff *skb, int offset, const void *from, int len)
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -1552,7 +1552,7 @@ __wsum skb_checksum(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -1581,7 +1581,7 @@ __wsum skb_checksum(const struct sk_buff *skb, int offset,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -1629,7 +1629,7 @@ __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -1662,7 +1662,7 @@ __wsum skb_copy_and_csum_bits(const struct sk_buff *skb, int offset,
 			__wsum csum2;
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
@@ -2373,7 +2373,7 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -2397,7 +2397,7 @@ __skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
diff --git a/net/core/stream.c b/net/core/stream.c
index 4a0ad152c9c..a6b3437ff08 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -192,13 +192,13 @@ void sk_stream_kill_queues(struct sock *sk)
 	__skb_queue_purge(&sk->sk_error_queue);
 
 	/* Next, the write queue. */
-	BUG_TRAP(skb_queue_empty(&sk->sk_write_queue));
+	WARN_ON(!skb_queue_empty(&sk->sk_write_queue));
 
 	/* Account for returned memory. */
 	sk_mem_reclaim(sk);
 
-	BUG_TRAP(!sk->sk_wmem_queued);
-	BUG_TRAP(!sk->sk_forward_alloc);
+	WARN_ON(sk->sk_wmem_queued);
+	WARN_ON(sk->sk_forward_alloc);
 
 	/* It is _impossible_ for the backlog to contain anything
 	 * when we get here.  All user references to this socket
diff --git a/net/core/user_dma.c b/net/core/user_dma.c
index c77aff9c6eb..53c6b67b287 100644
--- a/net/core/user_dma.c
+++ b/net/core/user_dma.c
@@ -27,7 +27,6 @@
 
 #include <linux/dmaengine.h>
 #include <linux/socket.h>
-#include <linux/rtnetlink.h> /* for BUG_TRAP */
 #include <net/tcp.h>
 #include <net/netdma.h>
 
@@ -71,7 +70,7 @@ int dma_skb_copy_datagram_iovec(struct dma_chan *chan,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		copy = end - offset;
@@ -100,7 +99,7 @@ int dma_skb_copy_datagram_iovec(struct dma_chan *chan,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			copy = end - offset;
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index 32617e0576c..743d85fcd65 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -164,7 +164,7 @@ static inline bool dccp_loss_free(const u64 s1, const u64 s2, const u64 ndp)
 {
 	s64 delta = dccp_delta_seqno(s1, s2);
 
-	BUG_TRAP(delta >= 0);
+	WARN_ON(delta < 0);
 	return (u64)delta <= ndp + 1;
 }
 
diff --git a/net/dccp/input.c b/net/dccp/input.c
index 08392ed86c2..df2f110df94 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -413,7 +413,7 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk,
 
 		/* Stop the REQUEST timer */
 		inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
-		BUG_TRAP(sk->sk_send_head != NULL);
+		WARN_ON(sk->sk_send_head == NULL);
 		__kfree_skb(sk->sk_send_head);
 		sk->sk_send_head = NULL;
 
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 2622ace17c4..a835b88237c 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -283,7 +283,7 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info)
 		 * ICMPs are not backlogged, hence we cannot get an established
 		 * socket here.
 		 */
-		BUG_TRAP(!req->sk);
+		WARN_ON(req->sk);
 
 		if (seq != dccp_rsk(req)->dreq_iss) {
 			NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index b74e8b2cbe5..da509127e00 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -186,7 +186,7 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		 * ICMPs are not backlogged, hence we cannot get an established
 		 * socket here.
 		 */
-		BUG_TRAP(req->sk == NULL);
+		WARN_ON(req->sk != NULL);
 
 		if (seq != dccp_rsk(req)->dreq_iss) {
 			NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index a0b56009611..b622d974485 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -327,7 +327,7 @@ int dccp_disconnect(struct sock *sk, int flags)
 	inet_csk_delack_init(sk);
 	__sk_dst_reset(sk);
 
-	BUG_TRAP(!inet->num || icsk->icsk_bind_hash);
+	WARN_ON(inet->num && !icsk->icsk_bind_hash);
 
 	sk->sk_error_report(sk);
 	return err;
@@ -981,7 +981,7 @@ adjudge_to_death:
 	 */
 	local_bh_disable();
 	bh_lock_sock(sk);
-	BUG_TRAP(!sock_owned_by_user(sk));
+	WARN_ON(sock_owned_by_user(sk));
 
 	/* Have we already been destroyed by a softirq or backlog? */
 	if (state != DCCP_CLOSED && sk->sk_state == DCCP_CLOSED)
diff --git a/net/dccp/timer.c b/net/dccp/timer.c
index 3608d5342ca..6a5b961b6f5 100644
--- a/net/dccp/timer.c
+++ b/net/dccp/timer.c
@@ -106,7 +106,7 @@ static void dccp_retransmit_timer(struct sock *sk)
 	 *	-- Acks     in client-PARTOPEN state (sec. 8.1.5)
 	 *	-- CloseReq in server-CLOSEREQ state (sec. 8.3)
 	 *	-- Close    in   node-CLOSING  state (sec. 8.3)                */
-	BUG_TRAP(sk->sk_send_head != NULL);
+	WARN_ON(sk->sk_send_head == NULL);
 
 	/*
 	 * More than than 4MSL (8 minutes) has passed, a RESET(aborted) was
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index dd919d84285..a107f49eea4 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -148,10 +148,10 @@ void inet_sock_destruct(struct sock *sk)
 		return;
 	}
 
-	BUG_TRAP(!atomic_read(&sk->sk_rmem_alloc));
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
-	BUG_TRAP(!sk->sk_wmem_queued);
-	BUG_TRAP(!sk->sk_forward_alloc);
+	WARN_ON(atomic_read(&sk->sk_rmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(sk->sk_wmem_queued);
+	WARN_ON(sk->sk_forward_alloc);
 
 	kfree(inet->opt);
 	dst_release(sk->sk_dst_cache);
@@ -341,7 +341,7 @@ lookup_protocol:
 	answer_flags = answer->flags;
 	rcu_read_unlock();
 
-	BUG_TRAP(answer_prot->slab != NULL);
+	WARN_ON(answer_prot->slab == NULL);
 
 	err = -ENOBUFS;
 	sk = sk_alloc(net, PF_INET, GFP_KERNEL, answer_prot);
@@ -661,8 +661,8 @@ int inet_accept(struct socket *sock, struct socket *newsock, int flags)
 
 	lock_sock(sk2);
 
-	BUG_TRAP((1 << sk2->sk_state) &
-		 (TCPF_ESTABLISHED | TCPF_CLOSE_WAIT | TCPF_CLOSE));
+	WARN_ON(!((1 << sk2->sk_state) &
+		  (TCPF_ESTABLISHED | TCPF_CLOSE_WAIT | TCPF_CLOSE)));
 
 	sock_graft(sk2, newsock);
 
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 2e667e2f90d..91d3d96805d 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -138,8 +138,8 @@ void in_dev_finish_destroy(struct in_device *idev)
 {
 	struct net_device *dev = idev->dev;
 
-	BUG_TRAP(!idev->ifa_list);
-	BUG_TRAP(!idev->mc_list);
+	WARN_ON(idev->ifa_list);
+	WARN_ON(idev->mc_list);
 #ifdef NET_REFCNT_DEBUG
 	printk(KERN_DEBUG "in_dev_finish_destroy: %p=%s\n",
 	       idev, dev ? dev->name : "NIL");
@@ -399,7 +399,7 @@ static int inet_set_ifa(struct net_device *dev, struct in_ifaddr *ifa)
 	}
 	ipv4_devconf_setall(in_dev);
 	if (ifa->ifa_dev != in_dev) {
-		BUG_TRAP(!ifa->ifa_dev);
+		WARN_ON(ifa->ifa_dev);
 		in_dev_hold(in_dev);
 		ifa->ifa_dev = in_dev;
 	}
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index bb81c958b74..0c1ae68ee84 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -167,7 +167,7 @@ tb_not_found:
 success:
 	if (!inet_csk(sk)->icsk_bind_hash)
 		inet_bind_hash(sk, tb, snum);
-	BUG_TRAP(inet_csk(sk)->icsk_bind_hash == tb);
+	WARN_ON(inet_csk(sk)->icsk_bind_hash != tb);
 	ret = 0;
 
 fail_unlock:
@@ -260,7 +260,7 @@ struct sock *inet_csk_accept(struct sock *sk, int flags, int *err)
 	}
 
 	newsk = reqsk_queue_get_child(&icsk->icsk_accept_queue, sk);
-	BUG_TRAP(newsk->sk_state != TCP_SYN_RECV);
+	WARN_ON(newsk->sk_state == TCP_SYN_RECV);
 out:
 	release_sock(sk);
 	return newsk;
@@ -386,7 +386,7 @@ struct request_sock *inet_csk_search_req(const struct sock *sk,
 		    ireq->rmt_addr == raddr &&
 		    ireq->loc_addr == laddr &&
 		    AF_INET_FAMILY(req->rsk_ops->family)) {
-			BUG_TRAP(!req->sk);
+			WARN_ON(req->sk);
 			*prevp = prev;
 			break;
 		}
@@ -539,14 +539,14 @@ EXPORT_SYMBOL_GPL(inet_csk_clone);
  */
 void inet_csk_destroy_sock(struct sock *sk)
 {
-	BUG_TRAP(sk->sk_state == TCP_CLOSE);
-	BUG_TRAP(sock_flag(sk, SOCK_DEAD));
+	WARN_ON(sk->sk_state != TCP_CLOSE);
+	WARN_ON(!sock_flag(sk, SOCK_DEAD));
 
 	/* It cannot be in hash table! */
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 
 	/* If it has not 0 inet_sk(sk)->num, it must be bound */
-	BUG_TRAP(!inet_sk(sk)->num || inet_csk(sk)->icsk_bind_hash);
+	WARN_ON(inet_sk(sk)->num && !inet_csk(sk)->icsk_bind_hash);
 
 	sk->sk_prot->destroy(sk);
 
@@ -629,7 +629,7 @@ void inet_csk_listen_stop(struct sock *sk)
 
 		local_bh_disable();
 		bh_lock_sock(child);
-		BUG_TRAP(!sock_owned_by_user(child));
+		WARN_ON(sock_owned_by_user(child));
 		sock_hold(child);
 
 		sk->sk_prot->disconnect(child, O_NONBLOCK);
@@ -647,7 +647,7 @@ void inet_csk_listen_stop(struct sock *sk)
 		sk_acceptq_removed(sk);
 		__reqsk_free(req);
 	}
-	BUG_TRAP(!sk->sk_ack_backlog);
+	WARN_ON(sk->sk_ack_backlog);
 }
 
 EXPORT_SYMBOL_GPL(inet_csk_listen_stop);
diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index 0546a0bc97e..6c52e08f786 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -134,8 +134,8 @@ void inet_frag_destroy(struct inet_frag_queue *q, struct inet_frags *f,
 	struct sk_buff *fp;
 	struct netns_frags *nf;
 
-	BUG_TRAP(q->last_in & INET_FRAG_COMPLETE);
-	BUG_TRAP(del_timer(&q->timer) == 0);
+	WARN_ON(!(q->last_in & INET_FRAG_COMPLETE));
+	WARN_ON(del_timer(&q->timer) != 0);
 
 	/* Release all fragment data. */
 	fp = q->fragments;
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 115f53722d2..44981906fb9 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -305,7 +305,7 @@ unique:
 	inet->num = lport;
 	inet->sport = htons(lport);
 	sk->sk_hash = hash;
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 	__sk_add_node(sk, &head->chain);
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
 	write_unlock(lock);
@@ -342,7 +342,7 @@ void __inet_hash_nolisten(struct sock *sk)
 	rwlock_t *lock;
 	struct inet_ehash_bucket *head;
 
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 
 	sk->sk_hash = inet_sk_ehashfn(sk);
 	head = inet_ehash_bucket(hashinfo, sk->sk_hash);
@@ -367,7 +367,7 @@ static void __inet_hash(struct sock *sk)
 		return;
 	}
 
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 	list = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)];
 	lock = &hashinfo->lhash_lock;
 
@@ -450,7 +450,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 			 */
 			inet_bind_bucket_for_each(tb, node, &head->chain) {
 				if (tb->ib_net == net && tb->port == port) {
-					BUG_TRAP(!hlist_empty(&tb->owners));
+					WARN_ON(hlist_empty(&tb->owners));
 					if (tb->fastreuse >= 0)
 						goto next_port;
 					if (!check_established(death_row, sk,
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 75c2def8f9a..d985bd613d2 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -86,7 +86,7 @@ void __inet_twsk_hashdance(struct inet_timewait_sock *tw, struct sock *sk,
 			hashinfo->bhash_size)];
 	spin_lock(&bhead->lock);
 	tw->tw_tb = icsk->icsk_bind_hash;
-	BUG_TRAP(icsk->icsk_bind_hash);
+	WARN_ON(!icsk->icsk_bind_hash);
 	inet_twsk_add_bind_node(tw, &tw->tw_tb->owners);
 	spin_unlock(&bhead->lock);
 
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 38d38f05801..2152d222b95 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -488,8 +488,8 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 		qp->q.fragments = head;
 	}
 
-	BUG_TRAP(head != NULL);
-	BUG_TRAP(FRAG_CB(head)->offset == 0);
+	WARN_ON(head == NULL);
+	WARN_ON(FRAG_CB(head)->offset != 0);
 
 	/* Allocate a new buffer for the datagram. */
 	ihlen = ip_hdrlen(head);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 465544f6281..d533a89e08d 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -118,7 +118,7 @@ static int ip_dev_loopback_xmit(struct sk_buff *newskb)
 	__skb_pull(newskb, skb_network_offset(newskb));
 	newskb->pkt_type = PACKET_LOOPBACK;
 	newskb->ip_summed = CHECKSUM_UNNECESSARY;
-	BUG_TRAP(newskb->dst);
+	WARN_ON(!newskb->dst);
 	netif_rx(newskb);
 	return 0;
 }
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 0b491bf03db..1ab341e5d3e 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1096,7 +1096,7 @@ void tcp_cleanup_rbuf(struct sock *sk, int copied)
 #if TCP_DEBUG
 	struct sk_buff *skb = skb_peek(&sk->sk_receive_queue);
 
-	BUG_TRAP(!skb || before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq));
+	WARN_ON(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq));
 #endif
 
 	if (inet_csk_ack_scheduled(sk)) {
@@ -1358,7 +1358,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 				goto found_ok_skb;
 			if (tcp_hdr(skb)->fin)
 				goto found_fin_ok;
-			BUG_TRAP(flags & MSG_PEEK);
+			WARN_ON(!(flags & MSG_PEEK));
 			skb = skb->next;
 		} while (skb != (struct sk_buff *)&sk->sk_receive_queue);
 
@@ -1421,8 +1421,8 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 
 			tp->ucopy.len = len;
 
-			BUG_TRAP(tp->copied_seq == tp->rcv_nxt ||
-				 (flags & (MSG_PEEK | MSG_TRUNC)));
+			WARN_ON(tp->copied_seq != tp->rcv_nxt &&
+				!(flags & (MSG_PEEK | MSG_TRUNC)));
 
 			/* Ugly... If prequeue is not empty, we have to
 			 * process it before releasing socket, otherwise
@@ -1844,7 +1844,7 @@ adjudge_to_death:
 	 */
 	local_bh_disable();
 	bh_lock_sock(sk);
-	BUG_TRAP(!sock_owned_by_user(sk));
+	WARN_ON(sock_owned_by_user(sk));
 
 	/* Have we already been destroyed by a softirq or backlog? */
 	if (state != TCP_CLOSE && sk->sk_state == TCP_CLOSE)
@@ -1973,7 +1973,7 @@ int tcp_disconnect(struct sock *sk, int flags)
 	memset(&tp->rx_opt, 0, sizeof(tp->rx_opt));
 	__sk_dst_reset(sk);
 
-	BUG_TRAP(!inet->num || icsk->icsk_bind_hash);
+	WARN_ON(inet->num && !icsk->icsk_bind_hash);
 
 	sk->sk_error_report(sk);
 	return err;
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 75efd244f2a..67ccce2a96b 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1629,10 +1629,10 @@ advance_sp:
 out:
 
 #if FASTRETRANS_DEBUG > 0
-	BUG_TRAP((int)tp->sacked_out >= 0);
-	BUG_TRAP((int)tp->lost_out >= 0);
-	BUG_TRAP((int)tp->retrans_out >= 0);
-	BUG_TRAP((int)tcp_packets_in_flight(tp) >= 0);
+	WARN_ON((int)tp->sacked_out < 0);
+	WARN_ON((int)tp->lost_out < 0);
+	WARN_ON((int)tp->retrans_out < 0);
+	WARN_ON((int)tcp_packets_in_flight(tp) < 0);
 #endif
 	return flag;
 }
@@ -2181,7 +2181,7 @@ static void tcp_mark_head_lost(struct sock *sk, int packets)
 	int err;
 	unsigned int mss;
 
-	BUG_TRAP(packets <= tp->packets_out);
+	WARN_ON(packets > tp->packets_out);
 	if (tp->lost_skb_hint) {
 		skb = tp->lost_skb_hint;
 		cnt = tp->lost_cnt_hint;
@@ -2610,7 +2610,7 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked, int flag)
 	/* E. Check state exit conditions. State can be terminated
 	 *    when high_seq is ACKed. */
 	if (icsk->icsk_ca_state == TCP_CA_Open) {
-		BUG_TRAP(tp->retrans_out == 0);
+		WARN_ON(tp->retrans_out != 0);
 		tp->retrans_stamp = 0;
 	} else if (!before(tp->snd_una, tp->high_seq)) {
 		switch (icsk->icsk_ca_state) {
@@ -2972,9 +2972,9 @@ static int tcp_clean_rtx_queue(struct sock *sk, int prior_fackets)
 	}
 
 #if FASTRETRANS_DEBUG > 0
-	BUG_TRAP((int)tp->sacked_out >= 0);
-	BUG_TRAP((int)tp->lost_out >= 0);
-	BUG_TRAP((int)tp->retrans_out >= 0);
+	WARN_ON((int)tp->sacked_out < 0);
+	WARN_ON((int)tp->lost_out < 0);
+	WARN_ON((int)tp->retrans_out < 0);
 	if (!tp->packets_out && tcp_is_sack(tp)) {
 		icsk = inet_csk(sk);
 		if (tp->lost_out) {
@@ -3877,7 +3877,7 @@ static void tcp_sack_remove(struct tcp_sock *tp)
 			int i;
 
 			/* RCV.NXT must cover all the block! */
-			BUG_TRAP(!before(tp->rcv_nxt, sp->end_seq));
+			WARN_ON(before(tp->rcv_nxt, sp->end_seq));
 
 			/* Zap this SACK, by moving forward any other SACKS. */
 			for (i=this_sack+1; i < num_sacks; i++)
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index a82df630756..a2b06d0cc26 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -418,7 +418,7 @@ void tcp_v4_err(struct sk_buff *skb, u32 info)
 		/* ICMPs are not backlogged, hence we cannot get
 		   an established socket here.
 		 */
-		BUG_TRAP(!req->sk);
+		WARN_ON(req->sk);
 
 		if (seq != tcp_rsk(req)->snt_isn) {
 			NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index 328e0cf42b3..5ab6ba19c3c 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -287,7 +287,7 @@ static void tcp_retransmit_timer(struct sock *sk)
 	if (!tp->packets_out)
 		goto out;
 
-	BUG_TRAP(!tcp_write_queue_empty(sk));
+	WARN_ON(tcp_write_queue_empty(sk));
 
 	if (!tp->snd_wnd && !sock_flag(sk, SOCK_DEAD) &&
 	    !((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV))) {
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 74d543d504a..a7842c54f58 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -313,8 +313,10 @@ static void in6_dev_finish_destroy_rcu(struct rcu_head *head)
 void in6_dev_finish_destroy(struct inet6_dev *idev)
 {
 	struct net_device *dev = idev->dev;
-	BUG_TRAP(idev->addr_list==NULL);
-	BUG_TRAP(idev->mc_list==NULL);
+
+	WARN_ON(idev->addr_list != NULL);
+	WARN_ON(idev->mc_list != NULL);
+
 #ifdef NET_REFCNT_DEBUG
 	printk(KERN_DEBUG "in6_dev_finish_destroy: %s\n", dev ? dev->name : "NIL");
 #endif
@@ -517,8 +519,9 @@ static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
 
 void inet6_ifa_finish_destroy(struct inet6_ifaddr *ifp)
 {
-	BUG_TRAP(ifp->if_next==NULL);
-	BUG_TRAP(ifp->lst_next==NULL);
+	WARN_ON(ifp->if_next != NULL);
+	WARN_ON(ifp->lst_next != NULL);
+
 #ifdef NET_REFCNT_DEBUG
 	printk(KERN_DEBUG "inet6_ifa_finish_destroy\n");
 #endif
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 3d828bc4b1c..0843c4d6218 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -153,7 +153,7 @@ lookup_protocol:
 	answer_flags = answer->flags;
 	rcu_read_unlock();
 
-	BUG_TRAP(answer_prot->slab != NULL);
+	WARN_ON(answer_prot->slab == NULL);
 
 	err = -ENOBUFS;
 	sk = sk_alloc(net, PF_INET6, GFP_KERNEL, answer_prot);
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index 87801cc1b2f..16d43f20b32 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -98,7 +98,7 @@ struct request_sock *inet6_csk_search_req(const struct sock *sk,
 		    ipv6_addr_equal(&treq->rmt_addr, raddr) &&
 		    ipv6_addr_equal(&treq->loc_addr, laddr) &&
 		    (!treq->iif || treq->iif == iif)) {
-			BUG_TRAP(req->sk == NULL);
+			WARN_ON(req->sk != NULL);
 			*prevp = prev;
 			return req;
 		}
diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index 00a8a5f9380..1646a565825 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -28,7 +28,7 @@ void __inet6_hash(struct sock *sk)
 	struct hlist_head *list;
 	rwlock_t *lock;
 
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 
 	if (sk->sk_state == TCP_LISTEN) {
 		list = &hashinfo->listening_hash[inet_sk_listen_hashfn(sk)];
@@ -202,7 +202,7 @@ unique:
 	 * in hash table socket with a funny identity. */
 	inet->num = lport;
 	inet->sport = htons(lport);
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 	__sk_add_node(sk, &head->chain);
 	sk->sk_hash = hash;
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 08ea2de28d6..52dddc25d3e 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -287,7 +287,7 @@ static int fib6_dump_node(struct fib6_walker_t *w)
 			w->leaf = rt;
 			return 1;
 		}
-		BUG_TRAP(res!=0);
+		WARN_ON(res == 0);
 	}
 	w->leaf = NULL;
 	return 0;
@@ -778,7 +778,7 @@ out:
 			pn->leaf = fib6_find_prefix(info->nl_net, pn);
 #if RT6_DEBUG >= 2
 			if (!pn->leaf) {
-				BUG_TRAP(pn->leaf != NULL);
+				WARN_ON(pn->leaf == NULL);
 				pn->leaf = info->nl_net->ipv6.ip6_null_entry;
 			}
 #endif
@@ -942,7 +942,7 @@ struct fib6_node * fib6_locate(struct fib6_node *root,
 
 #ifdef CONFIG_IPV6_SUBTREES
 	if (src_len) {
-		BUG_TRAP(saddr!=NULL);
+		WARN_ON(saddr == NULL);
 		if (fn && fn->subtree)
 			fn = fib6_locate_1(fn->subtree, saddr, src_len,
 					   offsetof(struct rt6_info, rt6i_src));
@@ -996,9 +996,9 @@ static struct fib6_node *fib6_repair_tree(struct net *net,
 		RT6_TRACE("fixing tree: plen=%d iter=%d\n", fn->fn_bit, iter);
 		iter++;
 
-		BUG_TRAP(!(fn->fn_flags&RTN_RTINFO));
-		BUG_TRAP(!(fn->fn_flags&RTN_TL_ROOT));
-		BUG_TRAP(fn->leaf==NULL);
+		WARN_ON(fn->fn_flags & RTN_RTINFO);
+		WARN_ON(fn->fn_flags & RTN_TL_ROOT);
+		WARN_ON(fn->leaf != NULL);
 
 		children = 0;
 		child = NULL;
@@ -1014,7 +1014,7 @@ static struct fib6_node *fib6_repair_tree(struct net *net,
 			fn->leaf = fib6_find_prefix(net, fn);
 #if RT6_DEBUG >= 2
 			if (fn->leaf==NULL) {
-				BUG_TRAP(fn->leaf);
+				WARN_ON(!fn->leaf);
 				fn->leaf = net->ipv6.ip6_null_entry;
 			}
 #endif
@@ -1025,16 +1025,17 @@ static struct fib6_node *fib6_repair_tree(struct net *net,
 		pn = fn->parent;
 #ifdef CONFIG_IPV6_SUBTREES
 		if (FIB6_SUBTREE(pn) == fn) {
-			BUG_TRAP(fn->fn_flags&RTN_ROOT);
+			WARN_ON(!(fn->fn_flags & RTN_ROOT));
 			FIB6_SUBTREE(pn) = NULL;
 			nstate = FWS_L;
 		} else {
-			BUG_TRAP(!(fn->fn_flags&RTN_ROOT));
+			WARN_ON(fn->fn_flags & RTN_ROOT);
 #endif
 			if (pn->right == fn) pn->right = child;
 			else if (pn->left == fn) pn->left = child;
 #if RT6_DEBUG >= 2
-			else BUG_TRAP(0);
+			else
+				WARN_ON(1);
 #endif
 			if (child)
 				child->parent = pn;
@@ -1154,14 +1155,14 @@ int fib6_del(struct rt6_info *rt, struct nl_info *info)
 
 #if RT6_DEBUG >= 2
 	if (rt->u.dst.obsolete>0) {
-		BUG_TRAP(fn==NULL);
+		WARN_ON(fn != NULL);
 		return -ENOENT;
 	}
 #endif
 	if (fn == NULL || rt == net->ipv6.ip6_null_entry)
 		return -ENOENT;
 
-	BUG_TRAP(fn->fn_flags&RTN_RTINFO);
+	WARN_ON(!(fn->fn_flags & RTN_RTINFO));
 
 	if (!(rt->rt6i_flags&RTF_CACHE)) {
 		struct fib6_node *pn = fn;
@@ -1266,7 +1267,7 @@ static int fib6_walk_continue(struct fib6_walker_t *w)
 			w->node = pn;
 #ifdef CONFIG_IPV6_SUBTREES
 			if (FIB6_SUBTREE(pn) == fn) {
-				BUG_TRAP(fn->fn_flags&RTN_ROOT);
+				WARN_ON(!(fn->fn_flags & RTN_ROOT));
 				w->state = FWS_L;
 				continue;
 			}
@@ -1281,7 +1282,7 @@ static int fib6_walk_continue(struct fib6_walker_t *w)
 				continue;
 			}
 #if RT6_DEBUG >= 2
-			BUG_TRAP(0);
+			WARN_ON(1);
 #endif
 		}
 	}
@@ -1323,7 +1324,7 @@ static int fib6_clean_node(struct fib6_walker_t *w)
 			}
 			return 0;
 		}
-		BUG_TRAP(res==0);
+		WARN_ON(res != 0);
 	}
 	w->leaf = rt;
 	return 0;
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 6407c64ea4a..6811901e6b1 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -116,7 +116,7 @@ static int ip6_dev_loopback_xmit(struct sk_buff *newskb)
 	__skb_pull(newskb, skb_network_offset(newskb));
 	newskb->pkt_type = PACKET_LOOPBACK;
 	newskb->ip_summed = CHECKSUM_UNNECESSARY;
-	BUG_TRAP(newskb->dst);
+	WARN_ON(!newskb->dst);
 
 	netif_rx(newskb);
 	return 0;
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index ad1cc5bbf97..31295c8f619 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -164,8 +164,8 @@ static int mip6_destopt_output(struct xfrm_state *x, struct sk_buff *skb)
 			calc_padlen(sizeof(*dstopt), 6));
 
 	hao->type = IPV6_TLV_HAO;
+	BUILD_BUG_ON(sizeof(*hao) != 18);
 	hao->length = sizeof(*hao) - 2;
-	BUG_TRAP(hao->length == 16);
 
 	len = ((char *)hao - (char *)dstopt) + sizeof(*hao);
 
@@ -174,7 +174,7 @@ static int mip6_destopt_output(struct xfrm_state *x, struct sk_buff *skb)
 	memcpy(&iph->saddr, x->coaddr, sizeof(iph->saddr));
 	spin_unlock_bh(&x->lock);
 
-	BUG_TRAP(len == x->props.header_len);
+	WARN_ON(len != x->props.header_len);
 	dstopt->hdrlen = (x->props.header_len >> 3) - 1;
 
 	return 0;
@@ -317,7 +317,7 @@ static int mip6_destopt_init_state(struct xfrm_state *x)
 	x->props.header_len = sizeof(struct ipv6_destopt_hdr) +
 		calc_padlen(sizeof(struct ipv6_destopt_hdr), 6) +
 		sizeof(struct ipv6_destopt_hao);
-	BUG_TRAP(x->props.header_len == 24);
+	WARN_ON(x->props.header_len != 24);
 
 	return 0;
 }
@@ -380,7 +380,7 @@ static int mip6_rthdr_output(struct xfrm_state *x, struct sk_buff *skb)
 	rt2->rt_hdr.segments_left = 1;
 	memset(&rt2->reserved, 0, sizeof(rt2->reserved));
 
-	BUG_TRAP(rt2->rt_hdr.hdrlen == 2);
+	WARN_ON(rt2->rt_hdr.hdrlen != 2);
 
 	memcpy(&rt2->addr, &iph->daddr, sizeof(rt2->addr));
 	spin_lock_bh(&x->lock);
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index cf20bc4fd60..52d06dd4b81 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -416,8 +416,8 @@ nf_ct_frag6_reasm(struct nf_ct_frag6_queue *fq, struct net_device *dev)
 
 	fq_kill(fq);
 
-	BUG_TRAP(head != NULL);
-	BUG_TRAP(NFCT_FRAG6_CB(head)->offset == 0);
+	WARN_ON(head == NULL);
+	WARN_ON(NFCT_FRAG6_CB(head)->offset != 0);
 
 	/* Unfragmented part is taken from the first segment. */
 	payload_len = ((head->data - skb_network_header(head)) -
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 6ab957ec2dd..89184b576e2 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -473,8 +473,8 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
 		fq->q.fragments = head;
 	}
 
-	BUG_TRAP(head != NULL);
-	BUG_TRAP(FRAG6_CB(head)->offset == 0);
+	WARN_ON(head == NULL);
+	WARN_ON(FRAG6_CB(head)->offset != 0);
 
 	/* Unfragmented part is taken from the first segment. */
 	payload_len = ((head->data - skb_network_header(head)) -
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index ae45f983501..cff778b23a7 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -421,7 +421,7 @@ static void tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 		/* ICMPs are not backlogged, hence we cannot get
 		 * an established socket here.
 		 */
-		BUG_TRAP(req->sk == NULL);
+		WARN_ON(req->sk != NULL);
 
 		if (seq != tcp_rsk(req)->snt_isn) {
 			NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
diff --git a/net/key/af_key.c b/net/key/af_key.c
index f0fc46c8038..d628df97e02 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -96,8 +96,8 @@ static void pfkey_sock_destruct(struct sock *sk)
 		return;
 	}
 
-	BUG_TRAP(!atomic_read(&sk->sk_rmem_alloc));
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_rmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
 
 	atomic_dec(&pfkey_socks_nr);
 }
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 98bfe277eab..b0eacc0007c 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -158,9 +158,10 @@ static void netlink_sock_destruct(struct sock *sk)
 		printk(KERN_ERR "Freeing alive netlink socket %p\n", sk);
 		return;
 	}
-	BUG_TRAP(!atomic_read(&sk->sk_rmem_alloc));
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
-	BUG_TRAP(!nlk_sk(sk)->groups);
+
+	WARN_ON(atomic_read(&sk->sk_rmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(nlk_sk(sk)->groups);
 }
 
 /* This lock without WQ_FLAG_EXCLUSIVE is good on UP and it is _very_ bad on
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index d56cae112dc..c718e7e3f7d 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -260,8 +260,8 @@ static inline struct packet_sock *pkt_sk(struct sock *sk)
 
 static void packet_sock_destruct(struct sock *sk)
 {
-	BUG_TRAP(!atomic_read(&sk->sk_rmem_alloc));
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_rmem_alloc));
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
 
 	if (!sock_flag(sk, SOCK_DEAD)) {
 		printk("Attempt to release alive packet socket: %p\n", sk);
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index 4b2682feeed..32e489118be 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -660,9 +660,9 @@ static void rxrpc_sock_destructor(struct sock *sk)
 
 	rxrpc_purge_queue(&sk->sk_receive_queue);
 
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
-	BUG_TRAP(sk_unhashed(sk));
-	BUG_TRAP(!sk->sk_socket);
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(!sk_unhashed(sk));
+	WARN_ON(sk->sk_socket);
 
 	if (!sock_flag(sk, SOCK_DEAD)) {
 		printk("Attempt to release alive rxrpc socket: %p\n", sk);
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index 74e662cbb2c..d308c19aa3f 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -41,7 +41,7 @@ void tcf_hash_destroy(struct tcf_common *p, struct tcf_hashinfo *hinfo)
 			return;
 		}
 	}
-	BUG_TRAP(0);
+	WARN_ON(1);
 }
 EXPORT_SYMBOL(tcf_hash_destroy);
 
diff --git a/net/sched/act_police.c b/net/sched/act_police.c
index 32c3f9d9fb7..38015b49394 100644
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -116,7 +116,7 @@ static void tcf_police_destroy(struct tcf_police *p)
 			return;
 		}
 	}
-	BUG_TRAP(0);
+	WARN_ON(1);
 }
 
 static const struct nla_policy police_policy[TCA_POLICE_MAX + 1] = {
diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 527db2559dd..246f9065ce3 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -345,7 +345,7 @@ static int u32_delete_key(struct tcf_proto *tp, struct tc_u_knode* key)
 			}
 		}
 	}
-	BUG_TRAP(0);
+	WARN_ON(1);
 	return 0;
 }
 
@@ -368,7 +368,7 @@ static int u32_destroy_hnode(struct tcf_proto *tp, struct tc_u_hnode *ht)
 	struct tc_u_common *tp_c = tp->data;
 	struct tc_u_hnode **hn;
 
-	BUG_TRAP(!ht->refcnt);
+	WARN_ON(ht->refcnt);
 
 	u32_clear_hnode(tp, ht);
 
@@ -380,7 +380,7 @@ static int u32_destroy_hnode(struct tcf_proto *tp, struct tc_u_hnode *ht)
 		}
 	}
 
-	BUG_TRAP(0);
+	WARN_ON(1);
 	return -ENOENT;
 }
 
@@ -389,7 +389,7 @@ static void u32_destroy(struct tcf_proto *tp)
 	struct tc_u_common *tp_c = tp->data;
 	struct tc_u_hnode *root_ht = xchg(&tp->root, NULL);
 
-	BUG_TRAP(root_ht != NULL);
+	WARN_ON(root_ht == NULL);
 
 	if (root_ht && --root_ht->refcnt == 0)
 		u32_destroy_hnode(tp, root_ht);
@@ -407,7 +407,7 @@ static void u32_destroy(struct tcf_proto *tp)
 		while ((ht = tp_c->hlist) != NULL) {
 			tp_c->hlist = ht->next;
 
-			BUG_TRAP(ht->refcnt == 0);
+			WARN_ON(ht->refcnt != 0);
 
 			kfree(ht);
 		}
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index f1d2f8ec8b4..14954bf4a68 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1175,7 +1175,7 @@ static void cbq_unlink_class(struct cbq_class *this)
 				this->tparent->children = NULL;
 		}
 	} else {
-		BUG_TRAP(this->sibling == this);
+		WARN_ON(this->sibling != this);
 	}
 }
 
@@ -1699,7 +1699,7 @@ static void cbq_destroy_class(struct Qdisc *sch, struct cbq_class *cl)
 {
 	struct cbq_sched_data *q = qdisc_priv(sch);
 
-	BUG_TRAP(!cl->filters);
+	WARN_ON(cl->filters);
 
 	tcf_destroy_chain(&cl->filter_list);
 	qdisc_destroy(cl->q);
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 43abd4d27ea..fd2a6cadb11 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -746,5 +746,5 @@ void dev_shutdown(struct net_device *dev)
 {
 	netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
 	shutdown_scheduler_queue(dev, &dev->rx_queue, NULL);
-	BUG_TRAP(!timer_pending(&dev->watchdog_timer));
+	WARN_ON(timer_pending(&dev->watchdog_timer));
 }
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 30c999c61b0..75a40951c4f 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -524,7 +524,7 @@ htb_change_class_mode(struct htb_sched *q, struct htb_class *cl, long *diff)
  */
 static inline void htb_activate(struct htb_sched *q, struct htb_class *cl)
 {
-	BUG_TRAP(!cl->level && cl->un.leaf.q && cl->un.leaf.q->q.qlen);
+	WARN_ON(cl->level || !cl->un.leaf.q || !cl->un.leaf.q->q.qlen);
 
 	if (!cl->prio_activity) {
 		cl->prio_activity = 1 << (cl->un.leaf.aprio = cl->un.leaf.prio);
@@ -542,7 +542,7 @@ static inline void htb_activate(struct htb_sched *q, struct htb_class *cl)
  */
 static inline void htb_deactivate(struct htb_sched *q, struct htb_class *cl)
 {
-	BUG_TRAP(cl->prio_activity);
+	WARN_ON(!cl->prio_activity);
 
 	htb_deactivate_prios(q, cl);
 	cl->prio_activity = 0;
@@ -757,7 +757,7 @@ static struct htb_class *htb_lookup_leaf(struct rb_root *tree, int prio,
 		u32 *pid;
 	} stk[TC_HTB_MAXDEPTH], *sp = stk;
 
-	BUG_TRAP(tree->rb_node);
+	WARN_ON(!tree->rb_node);
 	sp->root = tree->rb_node;
 	sp->pptr = pptr;
 	sp->pid = pid;
@@ -777,7 +777,7 @@ static struct htb_class *htb_lookup_leaf(struct rb_root *tree, int prio,
 				*sp->pptr = (*sp->pptr)->rb_left;
 			if (sp > stk) {
 				sp--;
-				BUG_TRAP(*sp->pptr);
+				WARN_ON(!*sp->pptr);
 				if (!*sp->pptr)
 					return NULL;
 				htb_next_rb_node(sp->pptr);
@@ -792,7 +792,7 @@ static struct htb_class *htb_lookup_leaf(struct rb_root *tree, int prio,
 			sp->pid = cl->un.inner.last_ptr_id + prio;
 		}
 	}
-	BUG_TRAP(0);
+	WARN_ON(1);
 	return NULL;
 }
 
@@ -810,7 +810,7 @@ static struct sk_buff *htb_dequeue_tree(struct htb_sched *q, int prio,
 
 	do {
 next:
-		BUG_TRAP(cl);
+		WARN_ON(!cl);
 		if (!cl)
 			return NULL;
 
@@ -1185,7 +1185,7 @@ static void htb_parent_to_leaf(struct htb_sched *q, struct htb_class *cl,
 {
 	struct htb_class *parent = cl->parent;
 
-	BUG_TRAP(!cl->level && cl->un.leaf.q && !cl->prio_activity);
+	WARN_ON(cl->level || !cl->un.leaf.q || cl->prio_activity);
 
 	if (parent->cmode != HTB_CAN_SEND)
 		htb_safe_rb_erase(&parent->pq_node, q->wait_pq + parent->level);
@@ -1205,7 +1205,7 @@ static void htb_parent_to_leaf(struct htb_sched *q, struct htb_class *cl,
 static void htb_destroy_class(struct Qdisc *sch, struct htb_class *cl)
 {
 	if (!cl->level) {
-		BUG_TRAP(cl->un.leaf.q);
+		WARN_ON(!cl->un.leaf.q);
 		qdisc_destroy(cl->un.leaf.q);
 	}
 	gen_kill_estimator(&cl->bstats, &cl->rate_est);
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index ec2a0a33fd7..8472b8b349c 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -464,7 +464,7 @@ static void sctp_association_destroy(struct sctp_association *asoc)
 		spin_unlock_bh(&sctp_assocs_id_lock);
 	}
 
-	BUG_TRAP(!atomic_read(&asoc->rmem_alloc));
+	WARN_ON(atomic_read(&asoc->rmem_alloc));
 
 	if (asoc->base.malloced) {
 		kfree(asoc);
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 70ceb1604ad..24eb214581d 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -227,7 +227,7 @@ static void __unix_remove_socket(struct sock *sk)
 
 static void __unix_insert_socket(struct hlist_head *list, struct sock *sk)
 {
-	BUG_TRAP(sk_unhashed(sk));
+	WARN_ON(!sk_unhashed(sk));
 	sk_add_node(sk, list);
 }
 
@@ -350,9 +350,9 @@ static void unix_sock_destructor(struct sock *sk)
 
 	skb_queue_purge(&sk->sk_receive_queue);
 
-	BUG_TRAP(!atomic_read(&sk->sk_wmem_alloc));
-	BUG_TRAP(sk_unhashed(sk));
-	BUG_TRAP(!sk->sk_socket);
+	WARN_ON(atomic_read(&sk->sk_wmem_alloc));
+	WARN_ON(!sk_unhashed(sk));
+	WARN_ON(sk->sk_socket);
 	if (!sock_flag(sk, SOCK_DEAD)) {
 		printk("Attempt to release alive unix socket: %p\n", sk);
 		return;
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index 23a2cc04b8c..96036cf2216 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -718,7 +718,7 @@ int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		int end;
 
-		BUG_TRAP(start <= offset + len);
+		WARN_ON(start > offset + len);
 
 		end = start + skb_shinfo(skb)->frags[i].size;
 		if ((copy = end - offset) > 0) {
@@ -748,7 +748,7 @@ int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
 		for (; list; list = list->next) {
 			int end;
 
-			BUG_TRAP(start <= offset + len);
+			WARN_ON(start > offset + len);
 
 			end = start + list->len;
 			if ((copy = end - offset) > 0) {
diff --git a/net/xfrm/xfrm_ipcomp.c b/net/xfrm/xfrm_ipcomp.c
index 800f669083f..c609a4b98e1 100644
--- a/net/xfrm/xfrm_ipcomp.c
+++ b/net/xfrm/xfrm_ipcomp.c
@@ -22,7 +22,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/percpu.h>
-#include <linux/rtnetlink.h>
 #include <linux/smp.h>
 #include <linux/vmalloc.h>
 #include <net/ip.h>
@@ -251,7 +250,7 @@ static void ipcomp_free_tfms(struct crypto_comp **tfms)
 			break;
 	}
 
-	BUG_TRAP(pos);
+	WARN_ON(!pos);
 
 	if (--pos->users)
 		return;
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 72fddafd891..4c6914ef7d9 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -538,7 +538,7 @@ EXPORT_SYMBOL(xfrm_state_alloc);
 
 void __xfrm_state_destroy(struct xfrm_state *x)
 {
-	BUG_TRAP(x->km.state == XFRM_STATE_DEAD);
+	WARN_ON(x->km.state != XFRM_STATE_DEAD);
 
 	spin_lock_bh(&xfrm_state_lock);
 	list_del(&x->all);
-- 
cgit v1.2.3


From ec34c702ca8b7d6f0aa54379c3b0d0ec10b8ff23 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Fri, 25 Jul 2008 21:45:49 -0700
Subject: net: drop unused BUG_TRAP()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/rtnetlink.h | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index f4d386c191f..ca643b13b02 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -755,13 +755,6 @@ extern void __rtnl_unlock(void);
 	} \
 } while(0)
 
-#define BUG_TRAP(x) do { \
-	if (unlikely(!(x))) { \
-		printk(KERN_ERR "KERNEL: assertion (%s) failed at %s (%d)\n", \
-			#x,  __FILE__ , __LINE__); \
-	} \
-} while(0)
-
 static inline u32 rtm_get_table(struct rtattr **rta, u8 table)
 {
 	return RTA_GET_U32(rta[RTA_TABLE-1]);
-- 
cgit v1.2.3


From 054a3fd824705543322d787893de9f3755151517 Mon Sep 17 00:00:00 2001
From: Wang Chen <wangchen@cn.fujitsu.com>
Date: Fri, 25 Jul 2008 15:44:33 +0800
Subject: flag parameters: fix compile error of sys_epoll_create1

  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      vmlinux
arch/x86/kernel/built-in.o: In function `sys_call_table':
(.rodata+0x8a4): undefined reference to `sys_epoll_create1'
make: *** [vmlinux] Error 1

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sys_ni.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 0fea0ee12da..0be4fc1409a 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -56,6 +56,7 @@ cond_syscall(compat_sys_set_robust_list);
 cond_syscall(sys_get_robust_list);
 cond_syscall(compat_sys_get_robust_list);
 cond_syscall(sys_epoll_create);
+cond_syscall(sys_epoll_create1);
 cond_syscall(sys_epoll_ctl);
 cond_syscall(sys_epoll_wait);
 cond_syscall(sys_epoll_pwait);
-- 
cgit v1.2.3


From 16df845f4566bc252f3e09db12f5c2f22cb44226 Mon Sep 17 00:00:00 2001
From: Florian Westphal <fw@strlen.de>
Date: Sat, 26 Jul 2008 02:21:54 -0700
Subject: syncookies: Make sure ECN is disabled

ecn_ok is not initialized when a connection is established by cookies.
The cookie syn-ack never sets ECN, so ecn_ok must be set to 0.

Spotted using ns-3/network simulation cradle simulator and valgrind.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/syncookies.c | 1 +
 net/ipv6/syncookies.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 51bc24d3b8a..9d38005abba 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -299,6 +299,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
 	ireq->rmt_port		= th->source;
 	ireq->loc_addr		= ip_hdr(skb)->daddr;
 	ireq->rmt_addr		= ip_hdr(skb)->saddr;
+	ireq->ecn_ok		= 0;
 	ireq->snd_wscale	= tcp_opt.snd_wscale;
 	ireq->rcv_wscale	= tcp_opt.rcv_wscale;
 	ireq->sack_ok		= tcp_opt.sack_ok;
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 6a68eeb7bbf..a46badd1082 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -223,6 +223,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 
 	req->expires = 0UL;
 	req->retrans = 0;
+	ireq->ecn_ok		= 0;
 	ireq->snd_wscale	= tcp_opt.snd_wscale;
 	ireq->rcv_wscale	= tcp_opt.rcv_wscale;
 	ireq->sack_ok		= tcp_opt.sack_ok;
-- 
cgit v1.2.3


From 509e2562adfd63964aa30c1ddd9ddf4e57949351 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Sat, 26 Jul 2008 02:24:10 -0700
Subject: qeth: use dev->ml_priv instead of dev->priv

From: Heiko Carstens <heiko.carstens@de.ibm.com>

This makes qeth working again after git commit
e3c50d5d25ac09efd9acbe2b2a3e365466de84ed
"netdev: netdev_priv() can now be sane again.".

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/s390/net/qeth_core_main.c | 14 +++++++-------
 drivers/s390/net/qeth_l2_main.c   | 26 +++++++++++++-------------
 drivers/s390/net/qeth_l3_main.c   | 30 +++++++++++++++---------------
 3 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index c3ad89e302b..cebb25e36e8 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3321,7 +3321,7 @@ int qeth_change_mtu(struct net_device *dev, int new_mtu)
 	struct qeth_card *card;
 	char dbf_text[15];
 
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "chgmtu");
 	sprintf(dbf_text, "%8x", new_mtu);
@@ -3343,7 +3343,7 @@ struct net_device_stats *qeth_get_stats(struct net_device *dev)
 {
 	struct qeth_card *card;
 
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 5, "getstat");
 
@@ -3395,7 +3395,7 @@ void qeth_tx_timeout(struct net_device *dev)
 {
 	struct qeth_card *card;
 
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 	card->stats.tx_errors++;
 	qeth_schedule_recovery(card);
 }
@@ -3403,7 +3403,7 @@ EXPORT_SYMBOL_GPL(qeth_tx_timeout);
 
 int qeth_mdio_read(struct net_device *dev, int phy_id, int regnum)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	int rc = 0;
 
 	switch (regnum) {
@@ -4253,7 +4253,7 @@ EXPORT_SYMBOL_GPL(qeth_core_get_stats_count);
 void qeth_core_get_ethtool_stats(struct net_device *dev,
 		struct ethtool_stats *stats, u64 *data)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	data[0] = card->stats.rx_packets -
 				card->perf_stats.initial_rx_packets;
 	data[1] = card->perf_stats.bufs_rec;
@@ -4313,7 +4313,7 @@ EXPORT_SYMBOL_GPL(qeth_core_get_strings);
 void qeth_core_get_drvinfo(struct net_device *dev,
 		struct ethtool_drvinfo *info)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	if (card->options.layer2)
 		strcpy(info->driver, "qeth_l2");
 	else
@@ -4331,7 +4331,7 @@ EXPORT_SYMBOL_GPL(qeth_core_get_drvinfo);
 int qeth_core_ethtool_get_settings(struct net_device *netdev,
 					struct ethtool_cmd *ecmd)
 {
-	struct qeth_card *card = netdev_priv(netdev);
+	struct qeth_card *card = netdev->ml_priv;
 	enum qeth_link_types link_type;
 
 	if ((card->info.type == QETH_CARD_TYPE_IQD) || (card->info.guestlan))
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 3fbc3bdec0c..a8b069cd9a4 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -35,7 +35,7 @@ static int qeth_l2_recover(void *);
 
 static int qeth_l2_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct mii_ioctl_data *mii_data;
 	int rc = 0;
 
@@ -317,7 +317,7 @@ static void qeth_l2_process_vlans(struct qeth_card *card, int clear)
 
 static void qeth_l2_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct qeth_vlan_vid *id;
 
 	QETH_DBF_TEXT_(TRACE, 4, "aid:%d", vid);
@@ -334,7 +334,7 @@ static void qeth_l2_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 static void qeth_l2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 {
 	struct qeth_vlan_vid *id, *tmpid = NULL;
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT_(TRACE, 4, "kid:%d", vid);
 	spin_lock_bh(&card->vlanlock);
@@ -566,7 +566,7 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card)
 static int qeth_l2_set_mac_address(struct net_device *dev, void *p)
 {
 	struct sockaddr *addr = p;
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	int rc = 0;
 
 	QETH_DBF_TEXT(TRACE, 3, "setmac");
@@ -590,7 +590,7 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p)
 
 static void qeth_l2_set_multicast_list(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct dev_mc_list *dm;
 
 	if (card->info.type == QETH_CARD_TYPE_OSN)
@@ -612,7 +612,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int rc;
 	struct qeth_hdr *hdr = NULL;
 	int elements = 0;
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct sk_buff *new_skb = skb;
 	int ipv = qeth_get_ip_version(skb);
 	int cast_type = qeth_get_cast_type(card, skb);
@@ -767,7 +767,7 @@ static void qeth_l2_qdio_input_handler(struct ccw_device *ccwdev,
 
 static int qeth_l2_open(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "qethopen");
 	if (card->state != CARD_STATE_SOFTSETUP)
@@ -791,7 +791,7 @@ static int qeth_l2_open(struct net_device *dev)
 
 static int qeth_l2_stop(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "qethstop");
 	netif_tx_disable(dev);
@@ -838,7 +838,7 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev)
 
 static int qeth_l2_ethtool_set_tso(struct net_device *dev, u32 data)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	if (data) {
 		if (card->options.large_send == QETH_LARGE_SEND_NO) {
@@ -894,7 +894,7 @@ static int qeth_l2_setup_netdev(struct qeth_card *card)
 	if (!card->dev)
 		return -ENODEV;
 
-	card->dev->priv = card;
+	card->dev->ml_priv = card;
 	card->dev->tx_timeout = &qeth_tx_timeout;
 	card->dev->watchdog_timeo = QETH_TX_TIMEOUT;
 	card->dev->open = qeth_l2_open;
@@ -1178,7 +1178,7 @@ int qeth_osn_assist(struct net_device *dev, void *data, int data_len)
 	QETH_DBF_TEXT(TRACE, 2, "osnsdmc");
 	if (!dev)
 		return -ENODEV;
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 	if (!card)
 		return -ENODEV;
 	if ((card->state != CARD_STATE_UP) &&
@@ -1201,7 +1201,7 @@ int qeth_osn_register(unsigned char *read_dev_no, struct net_device **dev,
 	*dev = qeth_l2_netdev_by_devno(read_dev_no);
 	if (*dev == NULL)
 		return -ENODEV;
-	card = netdev_priv(*dev);
+	card = (*dev)->ml_priv;
 	if (!card)
 		return -ENODEV;
 	if ((assist_cb == NULL) || (data_cb == NULL))
@@ -1219,7 +1219,7 @@ void qeth_osn_deregister(struct net_device *dev)
 	QETH_DBF_TEXT(TRACE, 2, "osndereg");
 	if (!dev)
 		return;
-	card = netdev_priv(dev);
+	card = dev->ml_priv;
 	if (!card)
 		return;
 	card->osn_info.assist_cb = NULL;
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 38de31b5570..3e1d1385735 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1813,7 +1813,7 @@ static void qeth_l3_free_vlan_addresses(struct qeth_card *card,
 static void qeth_l3_vlan_rx_register(struct net_device *dev,
 			struct vlan_group *grp)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	unsigned long flags;
 
 	QETH_DBF_TEXT(TRACE, 4, "vlanreg");
@@ -1825,7 +1825,7 @@ static void qeth_l3_vlan_rx_register(struct net_device *dev,
 static void qeth_l3_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 {
 	struct net_device *vlandev;
-	struct qeth_card *card = (struct qeth_card *) dev->priv;
+	struct qeth_card *card = dev->ml_priv;
 	struct in_device *in_dev;
 
 	if (card->info.type == QETH_CARD_TYPE_IQD)
@@ -1851,7 +1851,7 @@ static void qeth_l3_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 
 static void qeth_l3_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	unsigned long flags;
 
 	QETH_DBF_TEXT_(TRACE, 4, "kid:%d", vid);
@@ -2013,7 +2013,7 @@ static int qeth_l3_verify_vlan_dev(struct net_device *dev,
 		}
 	}
 
-	if (rc && !(netdev_priv(vlan_dev_real_dev(dev)) == (void *)card))
+	if (rc && !(vlan_dev_real_dev(dev)->ml_priv == (void *)card))
 		return 0;
 
 	return rc;
@@ -2047,9 +2047,9 @@ static struct qeth_card *qeth_l3_get_card_from_dev(struct net_device *dev)
 
 	rc = qeth_l3_verify_dev(dev);
 	if (rc == QETH_REAL_CARD)
-		card = netdev_priv(dev);
+		card = dev->ml_priv;
 	else if (rc == QETH_VLAN_CARD)
-		card = netdev_priv(vlan_dev_real_dev(dev));
+		card = vlan_dev_real_dev(dev)->ml_priv;
 	if (card && card->options.layer2)
 		card = NULL;
 	QETH_DBF_TEXT_(TRACE, 4, "%d", rc);
@@ -2110,7 +2110,7 @@ static int qeth_l3_stop_card(struct qeth_card *card, int recovery_mode)
 
 static void qeth_l3_set_multicast_list(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 3, "setmulti");
 	qeth_l3_delete_mc_addresses(card);
@@ -2438,7 +2438,7 @@ static int qeth_l3_arp_flush_cache(struct qeth_card *card)
 
 static int qeth_l3_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct qeth_arp_cache_entry arp_entry;
 	struct mii_ioctl_data *mii_data;
 	int rc = 0;
@@ -2595,7 +2595,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	u16 *tag;
 	struct qeth_hdr *hdr = NULL;
 	int elements_needed = 0;
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	struct sk_buff *new_skb = NULL;
 	int ipv = qeth_get_ip_version(skb);
 	int cast_type = qeth_get_cast_type(card, skb);
@@ -2763,7 +2763,7 @@ tx_drop:
 
 static int qeth_l3_open(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "qethopen");
 	if (card->state != CARD_STATE_SOFTSETUP)
@@ -2780,7 +2780,7 @@ static int qeth_l3_open(struct net_device *dev)
 
 static int qeth_l3_stop(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	QETH_DBF_TEXT(TRACE, 4, "qethstop");
 	netif_tx_disable(dev);
@@ -2792,14 +2792,14 @@ static int qeth_l3_stop(struct net_device *dev)
 
 static u32 qeth_l3_ethtool_get_rx_csum(struct net_device *dev)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	return (card->options.checksum_type == HW_CHECKSUMMING);
 }
 
 static int qeth_l3_ethtool_set_rx_csum(struct net_device *dev, u32 data)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 	enum qeth_card_states old_state;
 	enum qeth_checksum_types csum_type;
 
@@ -2825,7 +2825,7 @@ static int qeth_l3_ethtool_set_rx_csum(struct net_device *dev, u32 data)
 
 static int qeth_l3_ethtool_set_tso(struct net_device *dev, u32 data)
 {
-	struct qeth_card *card = netdev_priv(dev);
+	struct qeth_card *card = dev->ml_priv;
 
 	if (data) {
 		if (card->options.large_send == QETH_LARGE_SEND_NO) {
@@ -2915,7 +2915,7 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
 		return -ENODEV;
 
 	card->dev->hard_start_xmit = qeth_l3_hard_start_xmit;
-	card->dev->priv = card;
+	card->dev->ml_priv = card;
 	card->dev->tx_timeout = &qeth_tx_timeout;
 	card->dev->watchdog_timeo = QETH_TX_TIMEOUT;
 	card->dev->open = qeth_l3_open;
-- 
cgit v1.2.3


From 36ac26171afa8dbf29226199699fe955d4a0b6f6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 26 Jul 2008 11:22:33 +0200
Subject: crashdump: fix undefined reference to `elfcorehdr_addr'

fix build bug introduced by 95b68dec0d5 "calgary iommu: use the first
kernels TCE tables in kdump":

arch/x86/kernel/built-in.o: In function `calgary_iommu_init':
(.init.text+0x8399): undefined reference to `elfcorehdr_addr'
arch/x86/kernel/built-in.o: In function `calgary_iommu_init':
(.init.text+0x856c): undefined reference to `elfcorehdr_addr'
arch/x86/kernel/built-in.o: In function `detect_calgary':
(.init.text+0x8c68): undefined reference to `elfcorehdr_addr'
arch/x86/kernel/built-in.o: In function `detect_calgary':
(.init.text+0x8d0c): undefined reference to `elfcorehdr_addr'

make elfcorehdr_addr a generally available symbol.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/crash_dump.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 6cd39a927e1..025e4f57510 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -8,7 +8,13 @@
 #include <linux/proc_fs.h>
 
 #define ELFCORE_ADDR_MAX	(-1ULL)
+
+#ifdef CONFIG_PROC_VMCORE
 extern unsigned long long elfcorehdr_addr;
+#else
+static const unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+#endif
+
 extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
 						unsigned long, int);
 extern const struct file_operations proc_vmcore_operations;
-- 
cgit v1.2.3


From cdec7e50a4896c5197d5575d9ca635eea6825149 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sat, 26 Jul 2008 02:28:09 -0700
Subject: Revert "pkt_sched: sch_sfq: dump a real number of flows"

This reverts commit f867e6af94239a04ec23aeec2fcda5aa58e41db7.

Based upon discussions between Jarek and Patrick McHardy
this is field being set is more a config parameter than a
statistic.  And we should add a true statistic to provide
this information if we really want it.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_sfq.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index 73f53844ce9..8589da66656 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -536,14 +536,7 @@ static int sfq_dump(struct Qdisc *sch, struct sk_buff *skb)
 
 	opt.limit = q->limit;
 	opt.divisor = SFQ_HASH_DIVISOR;
-	opt.flows = 0;
-	if (q->tail != SFQ_DEPTH) {
-		unsigned int i;
-
-		for (i = 0; i < SFQ_HASH_DIVISOR; i++)
-			if (q->ht[i] != SFQ_DEPTH)
-				opt.flows++;
-	}
+	opt.flows = q->limit;
 
 	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
 
-- 
cgit v1.2.3


From b1b154e503a0e590eb9e189586783dc8750f910e Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Sat, 26 Jul 2008 18:02:05 +0800
Subject: Blackfin arch: check the EXTBANKS field of the DDRCTL1 register to
 see if we are using both memory banks

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/setup.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 8671d1db1f9..102a9db9855 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -700,6 +700,8 @@ static inline int __init get_mem_size(void)
 		case DEVWD_8:  ret *= 2;
 		case DEVWD_16: break;
 	}
+	if ((ddrctl & 0xc000) == 0x4000)
+		ret *= 2;
 	return ret;
 #endif
 	BUG();
-- 
cgit v1.2.3


From 377d43e7d07fc9a64eb162c6f70e6d1961604629 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Sat, 26 Jul 2008 18:28:03 +0800
Subject: Blackfin arch: fix bug - IMDMA is not type struct dma_register

TEMP Workaround - avoid access to PERIPHERAL_MAP

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/bfin_dma_5xx.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index ad0e75845ac..93229b3d6e3 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -477,7 +477,11 @@ int blackfin_dma_suspend(void)
 {
 	int i;
 
+#ifdef CONFIG_BF561	/* IMDMA channels doesn't have a PERIPHERAL_MAP */
+	for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) {
+#else
 	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) {
+#endif
 		if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) {
 			printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
 			return -EBUSY;
@@ -493,7 +497,11 @@ void blackfin_dma_resume(void)
 {
 	int i;
 
+#ifdef CONFIG_BF561	/* IMDMA channels doesn't have a PERIPHERAL_MAP */
+	for (i = 0; i <= CH_MEM_STREAM3_SRC; i++)
+#else
 	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++)
+#endif
 		dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
 }
 #endif
-- 
cgit v1.2.3


From 3a2521fa75359450f5ec7e6b76847f933b7ee680 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Sat, 26 Jul 2008 18:52:56 +0800
Subject: Blackfin arch: cache the values of vco/sclk/cclk as the overhead of
 doing so (~24 bytes) is worth avoiding the software mult/div routines

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/setup.c | 44 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 34 insertions(+), 10 deletions(-)

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 102a9db9855..5a455b6bb54 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -850,38 +850,55 @@ static int __init topology_init(void)
 
 subsys_initcall(topology_init);
 
+/* Get the voltage input multiplier */
+static u_long cached_vco_pll_ctl, cached_vco;
 static u_long get_vco(void)
 {
 	u_long msel;
-	u_long vco;
 
-	msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
+	u_long pll_ctl = bfin_read_PLL_CTL();
+	if (pll_ctl == cached_vco_pll_ctl)
+		return cached_vco;
+	else
+		cached_vco_pll_ctl = pll_ctl;
+
+	msel = (pll_ctl >> 9) & 0x3F;
 	if (0 == msel)
 		msel = 64;
 
-	vco = CONFIG_CLKIN_HZ;
-	vco >>= (1 & bfin_read_PLL_CTL());	/* DF bit */
-	vco = msel * vco;
-	return vco;
+	cached_vco = CONFIG_CLKIN_HZ;
+	cached_vco >>= (1 & pll_ctl);	/* DF bit */
+	cached_vco *= msel;
+	return cached_vco;
 }
 
 /* Get the Core clock */
+static u_long cached_cclk_pll_div, cached_cclk;
 u_long get_cclk(void)
 {
 	u_long csel, ssel;
+
 	if (bfin_read_PLL_STAT() & 0x1)
 		return CONFIG_CLKIN_HZ;
 
 	ssel = bfin_read_PLL_DIV();
+	if (ssel == cached_cclk_pll_div)
+		return cached_cclk;
+	else
+		cached_cclk_pll_div = ssel;
+
 	csel = ((ssel >> 4) & 0x03);
 	ssel &= 0xf;
 	if (ssel && ssel < (1 << csel))	/* SCLK > CCLK */
-		return get_vco() / ssel;
-	return get_vco() >> csel;
+		cached_cclk = get_vco() / ssel;
+	else
+		cached_cclk = get_vco() >> csel;
+	return cached_cclk;
 }
 EXPORT_SYMBOL(get_cclk);
 
 /* Get the System clock */
+static u_long cached_sclk_pll_div, cached_sclk;
 u_long get_sclk(void)
 {
 	u_long ssel;
@@ -889,13 +906,20 @@ u_long get_sclk(void)
 	if (bfin_read_PLL_STAT() & 0x1)
 		return CONFIG_CLKIN_HZ;
 
-	ssel = (bfin_read_PLL_DIV() & 0xf);
+	ssel = bfin_read_PLL_DIV();
+	if (ssel == cached_sclk_pll_div)
+		return cached_sclk;
+	else
+		cached_sclk_pll_div = ssel;
+
+	ssel &= 0xf;
 	if (0 == ssel) {
 		printk(KERN_WARNING "Invalid System Clock\n");
 		ssel = 1;
 	}
 
-	return get_vco() / ssel;
+	cached_sclk = get_vco() / ssel;
+	return cached_sclk;
 }
 EXPORT_SYMBOL(get_sclk);
 
-- 
cgit v1.2.3


From 0d1cdd7ab6e0e7ccaf9f3b1d2afa0ddeead23ccc Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Sat, 26 Jul 2008 18:54:38 +0800
Subject: Blackfin arch: Fix bug - skip single step in high priority interrupt
 handler instead of disabling all interrupts in single step debugging.

Skip single step if event priority of current instruction is higher than
that of the first instruction, from which gdb starts single step.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/kgdb.c       | 16 ++++++++++++-
 arch/blackfin/mach-common/entry.S | 50 +++++++++++++++++++++++++++++----------
 2 files changed, 53 insertions(+), 13 deletions(-)

diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index a9c15515bfd..a1f9641a642 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -203,6 +203,8 @@ struct hw_breakpoint {
 
 int kgdb_arch_init(void)
 {
+	debugger_step = 0;
+
 	kgdb_remove_all_hw_break();
 	return 0;
 }
@@ -368,6 +370,7 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 	char *ptr;
 	int newPC;
 	int wp_status;
+	int i;
 
 	switch (remcom_in_buffer[0]) {
 	case 'c':
@@ -392,7 +395,18 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 		/* set the trace bit if we're stepping */
 		if (remcom_in_buffer[0] == 's') {
 			linux_regs->syscfg |= 0x1;
-			debugger_step = 1;
+			debugger_step = linux_regs->ipend;
+			debugger_step >>= 6;
+			for (i = 10; i > 0; i--, debugger_step >>= 1)
+				if (debugger_step & 1)
+					break;
+			/* i indicate event priority of current stopped instruction
+			 * user space instruction is 0, IVG15 is 1, IVTMR is 10.
+			 * debugger_step > 0 means in single step mode
+			 */
+			debugger_step = i + 1;
+		} else {
+			debugger_step = 0;
 		}
 
 		wp_status = bfin_read_WPSTAT();
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 038f70e0be6..eceb484d90f 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -158,23 +158,45 @@ ENTRY(_ex_single_step)
 	cc = r7 == r6;
 	if cc jump _bfin_return_from_exception;
 
+	/* Don't do single step in hardware exception handler */
+        p5.l = lo(IPEND);
+        p5.h = hi(IPEND);
+	r6 = [p5];
+	cc = bittst(r6, 5);
+	if cc jump _bfin_return_from_exception;
+
+#ifdef CONFIG_KGDB
+	/* skip single step if current interrupt priority is higher than
+	 * that of the first instruction, from which gdb starts single step */
+	r6 >>= 6;
+	r7 = 10;
+.Lfind_priority_start:
+	cc = bittst(r6, 0);
+	if cc jump .Lfind_priority_done;
+	r6 >>= 1;
+	r7 += -1;
+	cc = r7 == 0;
+	if cc jump .Lfind_priority_done;
+	jump.s .Lfind_priority_start;
+.Lfind_priority_done:
+	p4.l = _debugger_step;
+	p4.h = _debugger_step;
+	r6 = [p4];
+	cc = r6 == 0;
+	if cc jump .Ldo_single_step;
+	r6 += -1;
+	cc = r6 < r7;
+	if cc jump _bfin_return_from_exception;
+.Ldo_single_step:
+#endif
+
 	/* If we were in user mode, do the single step normally.  */
-	p5.l = lo(IPEND);
-	p5.h = hi(IPEND);
 	r6 = [p5];
 	r7 = 0xffe0 (z);
 	r7 = r7 & r6;
 	cc = r7 == 0;
-	if !cc jump 1f;
-
-	/* Single stepping only a single instruction, so clear the trace
-	 * bit here.  */
-	r7 = syscfg;
-	bitclr (r7, 0);
-	syscfg = R7;
-	jump _ex_trap_c;
+	if cc jump 1f;
 
-1:
 	/*
 	 * We were in an interrupt handler.  By convention, all of them save
 	 * SYSCFG with their first instruction, so by checking whether our
@@ -202,11 +224,15 @@ ENTRY(_ex_single_step)
 	cc = R7 == R6;
 	if !cc jump _bfin_return_from_exception;
 
+1:
+	/* Single stepping only a single instruction, so clear the trace
+	 * bit here.  */
 	r7 = syscfg;
 	bitclr (r7, 0);
 	syscfg = R7;
 
-	/* Fall through to _bfin_return_from_exception.  */
+	jump _ex_trap_c;
+
 ENDPROC(_ex_single_step)
 
 ENTRY(_bfin_return_from_exception)
-- 
cgit v1.2.3


From 9de3a0b6979a4839d67ca840e386ea06acaabe39 Mon Sep 17 00:00:00 2001
From: Robin Getz <rgetz@blackfin.uclinux.org>
Date: Sat, 26 Jul 2008 19:39:19 +0800
Subject: Blackfin arch: When icache is off, make sure people know it

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/setup.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 5a455b6bb54..c2248fe8058 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -948,7 +948,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	uint32_t revid;
 
 	u_long cclk = 0, sclk = 0;
-	u_int dcache_size = 0, dsup_banks = 0;
+	u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
 
 	cpu = CPU;
 	mmu = "none";
@@ -1017,12 +1017,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	}
 
 	/* Is it turned on? */
-	if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)))
+	if (bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE) != (ENDCPLB | DMC_ENABLE))
 		dcache_size = 0;
 
+	if (bfin_read_IMEM_CONTROL() & (IMC | ENICPLB) == (IMC | ENICPLB))
+		icache_size = 0;
+
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
 		"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
-		BFIN_ICACHESIZE / 1024, dcache_size,
+		icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
 		"wb"
 #elif defined CONFIG_BFIN_WT
@@ -1032,8 +1035,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, "%s\n", cache);
 
-	seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
-		   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+	if (icache_size)
+		seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
+			   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+	else
+		seq_printf(m, "icache setup\t: off\n");
+
 	seq_printf(m,
 		   "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
 		   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
-- 
cgit v1.2.3


From 2d2009806dd843f3adc0cbbb5d2204980f28111a Mon Sep 17 00:00:00 2001
From: Robin Getz <rgetz@blackfin.uclinux.org>
Date: Sat, 26 Jul 2008 19:41:40 +0800
Subject: Blackfin arch: If we double fault, rather than hang forever, reset

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/setup.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index c2248fe8058..23e637eb78d 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -771,6 +771,9 @@ void __init setup_arch(char **cmdline_p)
 
 	_bfin_swrst = bfin_read_SWRST();
 
+	/* If we double fault, reset the system - otherwise we hang forever */
+	bfin_write_SWRST(DOUBLE_FAULT);
+
 	if (_bfin_swrst & RESET_DOUBLE)
 		printk(KERN_INFO "Recovering from Double Fault event\n");
 	else if (_bfin_swrst & RESET_WDOG)
@@ -1017,10 +1020,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	}
 
 	/* Is it turned on? */
-	if (bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE) != (ENDCPLB | DMC_ENABLE))
+	if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
 		dcache_size = 0;
 
-	if (bfin_read_IMEM_CONTROL() & (IMC | ENICPLB) == (IMC | ENICPLB))
+	if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
 		icache_size = 0;
 
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
-- 
cgit v1.2.3


From 1f972768a1df1518f45adb6b8ffbf04fa1c99737 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 26 Jul 2008 13:52:50 +0200
Subject: x86, RDC321x: add to mach-default

first step to add RDC321x support to the default PC architecture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig  | 26 +++++++++++---------------
 arch/x86/Makefile |  5 -----
 2 files changed, 11 insertions(+), 20 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e3cba0b4560..39ae6798595 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -23,7 +23,7 @@ config X86
 	select HAVE_OPROFILE
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
-	select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_KRETPROBES
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
@@ -332,20 +332,6 @@ config X86_BIGSMP
 
 endif
 
-config X86_RDC321X
-	bool "RDC R-321x SoC"
-	depends on X86_32
-	select M486
-	select X86_REBOOTFIXUPS
-	select GENERIC_GPIO
-	select LEDS_CLASS
-	select LEDS_GPIO
-	select NEW_LEDS
-	help
-	  This option is needed for RDC R-321x system-on-chip, also known
-	  as R-8610-(G).
-	  If you don't have one of these chips, you should say N here.
-
 config X86_VSMP
 	bool "Support for ScaleMP vSMP"
 	select PARAVIRT
@@ -369,6 +355,16 @@ config X86_VISWS
 	  A kernel compiled for the Visual Workstation will run on general
 	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
 
+config X86_RDC321X
+	bool "RDC R-321x SoC"
+	depends on X86_32
+	select M486
+	select X86_REBOOTFIXUPS
+	help
+	  This option is needed for RDC R-321x system-on-chip, also known
+	  as R-8610-(G).
+	  If you don't have one of these chips, you should say N here.
+
 config SCHED_NO_NO_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 919ce21ea65..f5631da585b 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -118,11 +118,6 @@ mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
 mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
 
-# RDC R-321x subarch support
-mflags-$(CONFIG_X86_RDC321X)	:= -Iinclude/asm-x86/mach-rdc321x
-mcore-$(CONFIG_X86_RDC321X)	:= arch/x86/mach-default/
-core-$(CONFIG_X86_RDC321X)	+= arch/x86/mach-rdc321x/
-
 # default subarch .h files
 mflags-y += -Iinclude/asm-x86/mach-default
 
-- 
cgit v1.2.3


From dcf309974555d17019c6a8e1a425238f17990b71 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Fri, 25 Jul 2008 18:00:42 -0400
Subject: ftrace: disable tracing on acpi idle calls

The acpi idle waits calls local_irq_save and then uses mwait to go into
idle. The tracer gets reenabled at local_irq_save but does not detect that
the idle allows for wake ups.

This patch adds code to disable the tracing when acpi puts the CPU to idle.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/acpi/processor_idle.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index d592dbb1d12..b7f2963693a 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -272,6 +272,8 @@ static atomic_t c3_cpu_count;
 /* Common C-state entry for C2, C3, .. */
 static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
 {
+	/* Don't trace irqs off for idle */
+	stop_critical_timings();
 	if (cstate->entry_method == ACPI_CSTATE_FFH) {
 		/* Call into architectural FFH based C-state */
 		acpi_processor_ffh_cstate_enter(cstate);
@@ -284,6 +286,7 @@ static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
 		   gets asserted in time to freeze execution properly. */
 		unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
 	}
+	start_critical_timings();
 }
 #endif /* !CONFIG_CPU_IDLE */
 
@@ -1418,6 +1421,8 @@ static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr,
  */
 static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx)
 {
+	/* Don't trace irqs off for idle */
+	stop_critical_timings();
 	if (cx->entry_method == ACPI_CSTATE_FFH) {
 		/* Call into architectural FFH based C-state */
 		acpi_processor_ffh_cstate_enter(cx);
@@ -1432,6 +1437,7 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx)
 		   gets asserted in time to freeze execution properly. */
 		unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
 	}
+	start_critical_timings();
 }
 
 /**
-- 
cgit v1.2.3


From 071375bc76ee86e58592f4682030c81d410ddfd9 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 26 Jul 2008 14:52:26 +0200
Subject: x86, RDC321x: remove gpio.h complications

Remove the include/asm-x86/gpio.h specials, just use the generic
version.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/asm-x86/gpio.h | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/include/asm-x86/gpio.h b/include/asm-x86/gpio.h
index 116e9147fe6..c4c91b37c10 100644
--- a/include/asm-x86/gpio.h
+++ b/include/asm-x86/gpio.h
@@ -16,10 +16,6 @@
 #ifndef _ASM_I386_GPIO_H
 #define _ASM_I386_GPIO_H
 
-#ifdef CONFIG_X86_RDC321X
-#include <gpio.h>
-#else /* CONFIG_X86_RDC321X */
-
 #include <asm-generic/gpio.h>
 
 #ifdef CONFIG_GPIOLIB
@@ -57,6 +53,4 @@ static inline int irq_to_gpio(unsigned int irq)
 
 #endif /* CONFIG_GPIOLIB */
 
-#endif /* CONFIG_X86_RDC321X */
-
 #endif /* _ASM_I386_GPIO_H */
-- 
cgit v1.2.3


From 1ca9fda4b2f3413e4bc748b983f5585629ca0560 Mon Sep 17 00:00:00 2001
From: Chris McDermott <lcm@linux.vnet.ibm.com>
Date: Thu, 24 Jul 2008 19:06:09 -0700
Subject: x86: fix IBM Summit based systems' phys_cpu_present_map on 32-bit
 kernels

x86 kernels on IBM Summit based systems will only online 1 CPU because the
phys_cpu_present_map is not set up correctly. Patch below applied to
2.6.26-git10.

Signed-off-by: Chris McDermott <lcm@linux.vnet.ibm.com>
Tested-by: Tim Pepper <lnxninga@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/asm-x86/mach-summit/mach_apic.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-x86/mach-summit/mach_apic.h b/include/asm-x86/mach-summit/mach_apic.h
index 75d2c95005d..c47e2ab5c5c 100644
--- a/include/asm-x86/mach-summit/mach_apic.h
+++ b/include/asm-x86/mach-summit/mach_apic.h
@@ -122,7 +122,7 @@ static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
 
 static inline physid_mask_t apicid_to_cpu_present(int apicid)
 {
-	return physid_mask_of_physid(0);
+	return physid_mask_of_physid(apicid);
 }
 
 static inline void setup_portio_remap(void)
-- 
cgit v1.2.3


From 1fe371044b21b226b96a9dd959e971b50b28c78e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 26 Jul 2008 15:09:47 +0200
Subject: ftrace: fix modular build

fix:

 ERROR: "start_critical_timings" [drivers/acpi/processor.ko] undefined!
 ERROR: "stop_critical_timings" [drivers/acpi/processor.ko] undefined!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace_irqsoff.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index b1e4a89b08e..ece6cfb649f 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -253,12 +253,14 @@ void start_critical_timings(void)
 	if (preempt_trace() || irq_trace())
 		start_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
 }
+EXPORT_SYMBOL_GPL(start_critical_timings);
 
 void stop_critical_timings(void)
 {
 	if (preempt_trace() || irq_trace())
 		stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
 }
+EXPORT_SYMBOL_GPL(stop_critical_timings);
 
 #ifdef CONFIG_IRQSOFF_TRACER
 #ifdef CONFIG_PROVE_LOCKING
-- 
cgit v1.2.3


From 3a61ec387c9092dfc91a5959145d36835a72fc4c Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 25 Jul 2008 13:07:50 +0200
Subject: x86, AMD IOMMU: include amd_iommu_last_bdf in device initialization

All the values read while searching for amd_iommu_last_bdf are defined as
inclusive. Let the code handle this value as such. Found by Wei Wang. Thanks
Wei.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: iommu@lists.linux-foundation.org
Cc: bhavna.sarathy@amd.com
Cc: robert.richter@amd.com
Cc: Wei Wang <wei.wang2@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/amd_iommu.c      | 4 ++--
 arch/x86/kernel/amd_iommu_init.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index c25210e6ac8..74697408576 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -667,7 +667,7 @@ static int get_device_resources(struct device *dev,
 	_bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
 
 	/* device not translated by any IOMMU in the system? */
-	if (_bdf >= amd_iommu_last_bdf) {
+	if (_bdf > amd_iommu_last_bdf) {
 		*iommu = NULL;
 		*domain = NULL;
 		*bdf = 0xffff;
@@ -1085,7 +1085,7 @@ void prealloc_protection_domains(void)
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		devid = (dev->bus->number << 8) | dev->devfn;
-		if (devid >= amd_iommu_last_bdf)
+		if (devid > amd_iommu_last_bdf)
 			continue;
 		devid = amd_iommu_alias_table[devid];
 		if (domain_for_device(devid))
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c9d8ff2eb13..d9a9da597e7 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -732,7 +732,7 @@ static int __init init_exclusion_range(struct ivmd_header *m)
 		set_device_exclusion_range(m->devid, m);
 		break;
 	case ACPI_IVMD_TYPE_ALL:
-		for (i = 0; i < amd_iommu_last_bdf; ++i)
+		for (i = 0; i <= amd_iommu_last_bdf; ++i)
 			set_device_exclusion_range(i, m);
 		break;
 	case ACPI_IVMD_TYPE_RANGE:
@@ -934,7 +934,7 @@ int __init amd_iommu_init(void)
 	/*
 	 * let all alias entries point to itself
 	 */
-	for (i = 0; i < amd_iommu_last_bdf; ++i)
+	for (i = 0; i <= amd_iommu_last_bdf; ++i)
 		amd_iommu_alias_table[i] = i;
 
 	/*
-- 
cgit v1.2.3


From e6bb83fd2f39eff3ae3e5ad6cac91d154d7ef3b1 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Sat, 19 Jul 2008 17:52:59 +0100
Subject: [ARM] 5176/1: arm/Makefile: fix: ARM946T -> ARM946E

This patch fixes a typo introduced by
commit f37f46eb1c0bd0b11c34ef06c7365658be989d80
([ARM] nommu: add ARM946E-S core support).

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b20995a82e0..2f074774423 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946T)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
 tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
-- 
cgit v1.2.3


From 9d9fa83beadf0a0c0ee2cd45be6e4a25cb536b67 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 24 Jul 2008 11:18:07 +0100
Subject: [ARM] fix mode for board-yl-9200.c

Xose Vazquez Perez points out that this file should not be marked
executable.

Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-yl-9200.c | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 mode change 100755 => 100644 arch/arm/mach-at91/board-yl-9200.c

diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
old mode 100755
new mode 100644
-- 
cgit v1.2.3


From 0c65f459ce6c8bd873a61b3ae1e57858ab1debf3 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 23 Jul 2008 15:35:22 -0700
Subject: [ARM] fix fls() for 64-bit arguments

arm's fls() is implemented as a macro, causing it to misbehave when passed
64-bit arguments.  Fix.

Cc: Nickolay Vinogradov <nickolay@protei.ru>
Tested-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/bitops.h | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h
index 5c60bfc1a84..9a1db20e032 100644
--- a/include/asm-arm/bitops.h
+++ b/include/asm-arm/bitops.h
@@ -277,9 +277,16 @@ static inline int constant_fls(int x)
  * the clz instruction for much better code efficiency.
  */
 
-#define fls(x) \
+#define __fls(x) \
 	( __builtin_constant_p(x) ? constant_fls(x) : \
 	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
+
+/* Implement fls() in C so that 64-bit args are suitably truncated */
+static inline int fls(int x)
+{
+	return __fls(x);
+}
+
 #define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
 #define __ffs(x) (ffs(x) - 1)
 #define ffz(x) __ffs( ~(x) )
-- 
cgit v1.2.3


From dd438e77f01d024919a8ae81d0cf2e4c6cda79cc Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 25 Jul 2008 20:55:52 +0100
Subject: [ARM] pci: provide dummy pci_get_legacy_ide_irq()

This fixes footbridge_defconfig:

drivers/pnp/resource.c: In function 'pci_dev_uses_irq':
drivers/pnp/resource.c:317: error: implicit declaration of function 'pci_get_legacy_ide_irq'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/pci.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
index 75feb1574a6..2d84792f2e1 100644
--- a/include/asm-arm/pci.h
+++ b/include/asm-arm/pci.h
@@ -78,6 +78,14 @@ pcibios_select_root(struct pci_dev *pdev, struct resource *res)
 	return root;
 }
 
+/*
+ * Dummy implementation; always return 0.
+ */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return 0;
+}
+
 #endif /* __KERNEL__ */
  
 #endif
-- 
cgit v1.2.3


From bb2b180ca0469a51256d5ad62008b495345ad61f Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 26 Jul 2008 15:36:03 +0100
Subject: [ARM] fix IOP32x, IOP33x, MXC and Samsung builds

7444a72effa632fcd8edc566f880d96fe213c73b caused these platforms to lose
their GPIOLIB configuration.  Convert the missed Kconfig symbols using:

  sed -i s/HAVE_GPIO_LIB/ARCH_REQUIRE_GPIOLIB/ arch/arm/Kconfig arch/arm/plat-s3c24xx/Kconfig

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig              | 6 +++---
 arch/arm/plat-s3c24xx/Kconfig | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dabb015aa40..c8f528284a9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -314,7 +314,7 @@ config ARCH_IOP32X
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -325,7 +325,7 @@ config ARCH_IOP33X
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -418,7 +418,7 @@ config ARCH_MXC
 	select GENERIC_CLOCKEVENTS
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5e28c217b8c..0af3872fb76 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,7 @@ config PLAT_S3C24XX
 	depends on ARCH_S3C2410
 	default y if ARCH_S3C2410
 	select NO_IOPORT
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Base platform code for any Samsung S3C24XX device
 
-- 
cgit v1.2.3


From 4ef584ba84125b67c17b5aded38e7783cd8cdef0 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 26 Jul 2008 15:46:39 +0100
Subject: [ARM] fix nwflash.c: 6ee8928d94841aa764aeaf645ad16daff811dc26

drivers/char/nwflash.c: In function 'flash_read':
drivers/char/nwflash.c:129: error: 'p' undeclared (first use in this function)
drivers/char/nwflash.c:129: error: (Each undeclared identifier is reported only once
drivers/char/nwflash.c:129: error: for each function it appears in.)
drivers/char/nwflash.c:129: error: 'count' undeclared (first use in this function)
drivers/char/nwflash.c:136: warning: passing argument 4 of 'simple_read_from_buffer' discards qualifiers from pointer target type

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/char/nwflash.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index f9f72a21129..006be92ee3f 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -125,15 +125,15 @@ static ssize_t flash_read(struct file *file, char __user *buf, size_t size,
 	ssize_t ret;
 
 	if (flashdebug)
-		printk(KERN_DEBUG "flash_read: flash_read: offset=0x%lX, "
-		       "buffer=%p, count=0x%X.\n", p, buf, count);
+		printk(KERN_DEBUG "flash_read: flash_read: offset=0x%llx, "
+		       "buffer=%p, count=0x%zx.\n", *ppos, buf, size);
 	/*
 	 * We now lock against reads and writes. --rmk
 	 */
 	if (mutex_lock_interruptible(&nwflash_mutex))
 		return -ERESTARTSYS;
 
-	ret = simple_read_from_buffer(buf, size, ppos, FLASH_BASE, gbFlashSize);
+	ret = simple_read_from_buffer(buf, size, ppos, (void *)FLASH_BASE, gbFlashSize);
 	mutex_unlock(&nwflash_mutex);
 
 	return ret;
-- 
cgit v1.2.3


From 87a9f704658a40940e740b1d73d861667e9164d3 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 23:03:48 +0300
Subject: include/video/atmel_lcdc.h must #include <linux/workqueue.h>

This patch fixes the following compile error caused by
commit d22579b837358cbef12ccca5adaf7e93ae09ab7a
(atmel_lcdfb: FIFO underflow management):

<--  snip  -->

...
  CC      arch/avr32/boards/atstk1000/atstk1004.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/avr32/boards/atstk1000/atstk1004.c:21:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/video/atmel_lcdc.h:40: error: field 'task' has incomplete type
make[2]: *** [arch/avr32/boards/atstk1000/atstk1004.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 include/video/atmel_lcdc.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index ed64862c4e1..dc934e8edc4 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -22,6 +22,7 @@
 #ifndef __ATMEL_LCDC_H__
 #define __ATMEL_LCDC_H__
 
+#include <linux/workqueue.h>
 
 /* Way LCD wires are connected to the chip:
  * Some Atmel chips use BGR color mode (instead of standard RGB)
-- 
cgit v1.2.3


From 0c7ad106e779549792deb307242dece6f3499bb9 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Fri, 25 Jul 2008 19:44:35 -0700
Subject: drivers/mmc/host/sdhci.h needs scatterlist.h

alpha:

drivers/mmc/host/sdhci.h:242: error: field 'sg_miter' has incomplete type

Cc: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/sdhci.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index a06bf8b8934..e354faee5df 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -9,6 +9,8 @@
  * your option) any later version.
  */
 
+#include <linux/scatterlist.h>
+
 /*
  * Controller registers
  */
-- 
cgit v1.2.3


From 16d69265b930f7e2fa9eea381715696f780718f4 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Fri, 25 Jul 2008 19:44:36 -0700
Subject: uninline arch_pick_mmap_layout()

Fix this, on avr32:

  include/linux/utsname.h:35,
                   from init/main.c:20:
  include/linux/sched.h: In function 'arch_pick_mmap_layout':
  include/linux/sched.h:2149: error: implicit declaration of function 'PAGE_ALIGN'

Reported-by: Adrian Bunk <bunk@kernel.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sched.h |  9 ---------
 mm/util.c             | 10 ++++++++++
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index 42036ffe6b0..3260a5c42b9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -2139,16 +2139,7 @@ static inline void set_task_cpu(struct task_struct *p, unsigned int cpu)
 
 #endif /* CONFIG_SMP */
 
-#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
 extern void arch_pick_mmap_layout(struct mm_struct *mm);
-#else
-static inline void arch_pick_mmap_layout(struct mm_struct *mm)
-{
-	mm->mmap_base = TASK_UNMAPPED_BASE;
-	mm->get_unmapped_area = arch_get_unmapped_area;
-	mm->unmap_area = arch_unmap_area;
-}
-#endif
 
 #ifdef CONFIG_TRACING
 extern void
diff --git a/mm/util.c b/mm/util.c
index 8f18683825b..0efd83097ec 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -1,3 +1,4 @@
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/module.h>
@@ -136,3 +137,12 @@ char *strndup_user(const char __user *s, long n)
 	return p;
 }
 EXPORT_SYMBOL(strndup_user);
+
+#ifndef HAVE_ARCH_PICK_MMAP_LAYOUT
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+	mm->mmap_base = TASK_UNMAPPED_BASE;
+	mm->get_unmapped_area = arch_get_unmapped_area;
+	mm->unmap_area = arch_unmap_area;
+}
+#endif
-- 
cgit v1.2.3


From 8a21346058ad946134b6ddfeb5de975c3cfcf5da Mon Sep 17 00:00:00 2001
From: Nishanth Aravamudan <nacc@us.ibm.com>
Date: Fri, 25 Jul 2008 19:44:37 -0700
Subject: hugetlb: fix CONFIG_SYSCTL=n build

Fixes a build failure reported by Alan Cox:

mm/hugetlb.c: In function `hugetlb_acct_memory': mm/hugetlb.c:1507:
error: implicit declaration of function `cpuset_mems_nr'

Also reverts Ingo's

    commit e44d1b2998d62a1f2f4d7eb17b56ba396535509f
    Author: Ingo Molnar <mingo@elte.hu>
    Date:   Fri Jul 25 12:57:41 2008 +0200

        mm/hugetlb.c: fix build failure with !CONFIG_SYSCTL

which fixed the build error but added some unused-static-function warnings.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index a8bf4ab01f8..3be79dc18c5 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1026,18 +1026,6 @@ static void __init report_hugepages(void)
 	}
 }
 
-static unsigned int cpuset_mems_nr(unsigned int *array)
-{
-	int node;
-	unsigned int nr = 0;
-
-	for_each_node_mask(node, cpuset_current_mems_allowed)
-		nr += array[node];
-
-	return nr;
-}
-
-#ifdef CONFIG_SYSCTL
 #ifdef CONFIG_HIGHMEM
 static void try_to_free_low(struct hstate *h, unsigned long count)
 {
@@ -1386,6 +1374,18 @@ static int __init hugetlb_default_setup(char *s)
 }
 __setup("default_hugepagesz=", hugetlb_default_setup);
 
+static unsigned int cpuset_mems_nr(unsigned int *array)
+{
+	int node;
+	unsigned int nr = 0;
+
+	for_each_node_mask(node, cpuset_current_mems_allowed)
+		nr += array[node];
+
+	return nr;
+}
+
+#ifdef CONFIG_SYSCTL
 int hugetlb_sysctl_handler(struct ctl_table *table, int write,
 			   struct file *file, void __user *buffer,
 			   size_t *length, loff_t *ppos)
-- 
cgit v1.2.3


From 44ccac13c7f4728cf2992d49384671a176db74dd Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:44:38 -0700
Subject: include/video/atmel_lcdc.h must #include <linux/workqueue.h>

This patch fixes the following compile error caused by commit
d22579b837358cbef12ccca5adaf7e93ae09ab7a ("atmel_lcdfb: FIFO underflow
management"):

  In file included from arch/avr32/boards/atstk1000/atstk1004.c:21:
  include/video/atmel_lcdc.h:40: error: field 'task' has incomplete type

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/video/atmel_lcdc.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 1ccf462b433..613173b5db6 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -22,6 +22,7 @@
 #ifndef __ATMEL_LCDC_H__
 #define __ATMEL_LCDC_H__
 
+#include <linux/workqueue.h>
 
 /* Way LCD wires are connected to the chip:
  * Some Atmel chips use BGR color mode (instead of standard RGB)
-- 
cgit v1.2.3


From a2e2e3577c3ef2b5dbb866e97e612aae4adfa32f Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Fri, 25 Jul 2008 19:44:38 -0700
Subject: pm selftest: rtc paranoia

Cope with a quirk of some RTCs (notably ACPI ones) which aren't guaranteed
to implement oneshot behavior when they woke the system from sleeep:
forcibly disable the alarm, just in case.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/power/main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/kernel/power/main.c b/kernel/power/main.c
index 95bff23ecda..0b7476f5d2a 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -635,6 +635,13 @@ static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
 	}
 	if (status < 0)
 		printk(err_suspend, status);
+
+	/* Some platforms can't detect that the alarm triggered the
+	 * wakeup, or (accordingly) disable it after it afterwards.
+	 * It's supposed to give oneshot behavior; cope.
+	 */
+	alm.enabled = false;
+	rtc_set_alarm(rtc, &alm);
 }
 
 static int __init has_wakealarm(struct device *dev, void *name_ptr)
-- 
cgit v1.2.3


From a76eef9573c93f8f324ebacfd090a3e319a64d59 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 25 Jul 2008 19:44:39 -0700
Subject: block/blk-map.c: use the new object_is_on_stack() helper

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 block/blk-map.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/block/blk-map.c b/block/blk-map.c
index ddd96fb11a7..af37e4ae62f 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -269,7 +269,6 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 	int reading = rq_data_dir(rq) == READ;
 	int do_copy = 0;
 	struct bio *bio;
-	unsigned long stack_mask = ~(THREAD_SIZE - 1);
 
 	if (len > (q->max_hw_sectors << 9))
 		return -EINVAL;
@@ -278,11 +277,8 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 
 	kaddr = (unsigned long)kbuf;
 	alignment = queue_dma_alignment(q) | q->dma_pad_mask;
-	do_copy = ((kaddr & alignment) || (len & alignment));
-
-	if (!((kaddr & stack_mask) ^
-	      ((unsigned long)current->stack & stack_mask)))
-		do_copy = 1;
+	do_copy = ((kaddr & alignment) || (len & alignment) ||
+		   object_is_on_stack(kbuf));
 
 	if (do_copy)
 		bio = bio_copy_kern(q, kbuf, len, gfp_mask, reading);
-- 
cgit v1.2.3


From f3c6ba986ab4527b6dfacf9f3b9e40f72466a8b2 Mon Sep 17 00:00:00 2001
From: Kentaro Makita <k-makita@np.css.fujitsu.com>
Date: Fri, 25 Jul 2008 19:44:40 -0700
Subject: vfs: add cond_resched_lock while scanning dentry LRU lists

Add cond_resched_lock(&dcache_lock) while scanning LRU lists on
superblocks in __shrink_dcache_sb()

Signed-off-by: Kentaro Makita <k-makita@np.css.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/dcache.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/dcache.c b/fs/dcache.c
index 3818d6ab76c..f2584d22cb4 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -487,6 +487,7 @@ restart:
 				if (!cnt)
 					break;
 			}
+			cond_resched_lock(&dcache_lock);
 		}
 	}
 	while (!list_empty(&tmp)) {
-- 
cgit v1.2.3


From c491b2ffae3fad5e6e3cb2320b46bb8ea8729d49 Mon Sep 17 00:00:00 2001
From: Roel Kluin <12o3l@tiscali.nl>
Date: Fri, 25 Jul 2008 19:44:41 -0700
Subject: asic3: platform_get_irq() may return signed unnoticed

asic->irq_nr is unsigned. platform_get_irq() may return signed unnoticed

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: Joe Perches <joe@perches.com>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mfd/asic3.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 3b870e7fb3e..eabf0bfccab 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -314,10 +314,12 @@ static int __init asic3_irq_probe(struct platform_device *pdev)
 	unsigned long clksel = 0;
 	unsigned int irq, irq_base;
 	int map_size;
+	int ret;
 
-	asic->irq_nr = platform_get_irq(pdev, 0);
-	if (asic->irq_nr < 0)
-		return asic->irq_nr;
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+	asic->irq_nr = ret;
 
 	/* turn on clock to IRQ controller */
 	clksel |= CLOCK_SEL_CX;
-- 
cgit v1.2.3


From e86b19ce64a25d39bb0e10e0e695213fc5993dfb Mon Sep 17 00:00:00 2001
From: Rene Herman <rene.herman@keyaccess.nl>
Date: Fri, 25 Jul 2008 19:44:42 -0700
Subject: pnp: set the pnp_card dma_mask for use by ISAPnP cards

dma_alloc_coherent() on x86 currently takes a passed in NULL device
pointer to mean that it should allocate an ISA compatible (24-bit) buffer
which is a bit of a hack.

The ALSA ISA drivers are the main consumers of this but have a struct
device in fact readily available.

For the PnP drivers, the specific pnp_dev->dev device pointer is not
always available at the right time so for now we want to pass the
pnp_card->dev instead which is always available.  Set its dma_mask in
preparation for doing so.

This does not fix a current bug -- 2.6.26-rc1 stumbled over the NULL hack
in dma_alloc_coherent() but this has already been fixed in commit
4a367f3a9dbf2e7ffcee4702203479809236ee6e by Takashi Iwai.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pnp/card.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index a762a417673..b00ef1030e4 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -8,6 +8,7 @@
 #include <linux/ctype.h>
 #include <linux/slab.h>
 #include <linux/pnp.h>
+#include <linux/dma-mapping.h>
 #include "base.h"
 
 LIST_HEAD(pnp_cards);
@@ -167,6 +168,9 @@ struct pnp_card *pnp_alloc_card(struct pnp_protocol *protocol, int id, char *pnp
 	sprintf(card->dev.bus_id, "%02x:%02x", card->protocol->number,
 		card->number);
 
+	card->dev.coherent_dma_mask = DMA_24BIT_MASK;
+	card->dev.dma_mask = &card->dev.coherent_dma_mask;
+
 	dev_id = pnp_add_card_id(card, pnpid);
 	if (!dev_id) {
 		kfree(card);
-- 
cgit v1.2.3


From 00412be1d7bdf451653c7dafeb09f4f83398d756 Mon Sep 17 00:00:00 2001
From: Rene Herman <rene.herman@keyaccess.nl>
Date: Fri, 25 Jul 2008 19:44:45 -0700
Subject: isa: set 24-bit dma_mask for ISA devices

dma_alloc_coherent() on x86 currently takes a passed in NULL device
pointer to mean that it should allocate an ISA compatible (24-bit) buffer
which is a bit of a hack.

The ALSA ISA drivers are the main consumers of this but have a struct
device in fact readily available.

For the legacy drivers, this sets the device dma_mask in preparation for
using the actual device with the DMA API so as to eventually not need the
NULL hack in dma_alloc_coherent().

This does not fix a current bug -- 2.6.26-rc1 stumbled over the NULL hack
in dma_alloc_coherent() but this has already been fixed in commit
4a367f3a9dbf2e7ffcee4702203479809236ee6e by Takashi Iwai.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/base/isa.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/base/isa.c b/drivers/base/isa.c
index d2222397a40..efd57757494 100644
--- a/drivers/base/isa.c
+++ b/drivers/base/isa.c
@@ -7,6 +7,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/dma-mapping.h>
 #include <linux/isa.h>
 
 static struct device isa_bus = {
@@ -141,6 +142,9 @@ int isa_register_driver(struct isa_driver *isa_driver, unsigned int ndev)
 		isa_dev->dev.release		= isa_dev_release;
 		isa_dev->id			= id;
 
+		isa_dev->dev.coherent_dma_mask = DMA_24BIT_MASK;
+		isa_dev->dev.dma_mask = &isa_dev->dev.coherent_dma_mask;
+
 		error = device_register(&isa_dev->dev);
 		if (error) {
 			put_device(&isa_dev->dev);
-- 
cgit v1.2.3


From 999ed65ad12e374d7445fbc13f5a1d146ae4b0da Mon Sep 17 00:00:00 2001
From: Rene Herman <rene.herman@gmail.com>
Date: Fri, 25 Jul 2008 19:44:47 -0700
Subject: pnp: have quirk_system_pci_resources() include io resources

quirk_system_pci_resources() disables a PnP mem resource that overlaps a
PCI BAR so as to not keep the PCI driver from claiming the resource.  Have
it do the same for io resources.

Here, ACPI claims ports that overlap with my soundcard causing the
soundcard driver to fail to load.  It's unknown why my ACPI BIOS claims
those ports; it did not use to but this is not a (kernel) regression.
Some odd BIOS reconfig triggered by temporarily removing the card seems to
have brought this on.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pnp/quirks.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index 55f55ed72dc..0bdf9b8a5e5 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -245,15 +245,17 @@ static void quirk_system_pci_resources(struct pnp_dev *dev)
 	 */
 	for_each_pci_dev(pdev) {
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM) ||
-			    pci_resource_len(pdev, i) == 0)
+			unsigned int type;
+
+			type = pci_resource_flags(pdev, i) &
+					(IORESOURCE_IO | IORESOURCE_MEM);
+			if (!type || pci_resource_len(pdev, i) == 0)
 				continue;
 
 			pci_start = pci_resource_start(pdev, i);
 			pci_end = pci_resource_end(pdev, i);
 			for (j = 0;
-			     (res = pnp_get_resource(dev, IORESOURCE_MEM, j));
-			     j++) {
+			     (res = pnp_get_resource(dev, type, j)); j++) {
 				if (res->start == 0 && res->end == 0)
 					continue;
 
@@ -283,9 +285,10 @@ static void quirk_system_pci_resources(struct pnp_dev *dev)
 				 * the PCI region, and that might prevent a PCI
 				 * driver from requesting its resources.
 				 */
-				dev_warn(&dev->dev, "mem resource "
+				dev_warn(&dev->dev, "%s resource "
 					"(0x%llx-0x%llx) overlaps %s BAR %d "
 					"(0x%llx-0x%llx), disabling\n",
+					pnp_resource_type_name(res),
 					(unsigned long long) pnp_start,
 					(unsigned long long) pnp_end,
 					pci_name(pdev), i,
-- 
cgit v1.2.3


From c485b465a031b6f9b9a51300e0ee1f86efc6db87 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 25 Jul 2008 19:44:47 -0700
Subject: pnp: fix the fcpnp_driver declaration to only exist if CONFIG_PNP=y

Fix the fcpnp_driver declaration to only exist if CONFIG_PNP=y as it's
only accessed in that case.

The PNP=n variant was added by 30d55e71a81b1f5a8136f191dc9f4c21f18e77e6
("hisax: depend on CONFIG_PNP, not __ISAPNP__")

Fixes an unused variable warning.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/isdn/hisax/hisax_fcpcipnp.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
index c0b4db2f836..1925118122f 100644
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c
@@ -974,8 +974,6 @@ static struct pnp_driver fcpnp_driver = {
 	.remove		= __devexit_p(fcpnp_remove),
 	.id_table	= fcpnp_ids,
 };
-#else
-static struct pnp_driver fcpnp_driver;
 #endif
 
 static void __devexit fcpci_remove(struct pci_dev *pdev)
-- 
cgit v1.2.3


From 8d8bb39b9eba32dd70e87fd5ad5c5dd4ba118e06 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 25 Jul 2008 19:44:49 -0700
Subject: dma-mapping: add the device argument to dma_mapping_error()

Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER
architecture does:

This enables us to cleanly fix the Calgary IOMMU issue that some devices
are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423).

I think that per-device dma_mapping_ops support would be also helpful for
KVM people to support PCI passthrough but Andi thinks that this makes it
difficult to support the PCI passthrough (see the above thread).  So I
CC'ed this to KVM camp.  Comments are appreciated.

A pointer to dma_mapping_ops to struct dev_archdata is added.  If the
pointer is non NULL, DMA operations in asm/dma-mapping.h use it.  If it's
NULL, the system-wide dma_ops pointer is used as before.

If it's useful for KVM people, I plan to implement a mechanism to register
a hook called when a new pci (or dma capable) device is created (it works
with hot plugging).  It enables IOMMUs to set up an appropriate
dma_mapping_ops per device.

The major obstacle is that dma_mapping_error doesn't take a pointer to the
device unlike other DMA operations.  So x86 can't have dma_mapping_ops per
device.  Note all the POWER IOMMUs use the same dma_mapping_error function
so this is not a problem for POWER but x86 IOMMUs use different
dma_mapping_error functions.

The first patch adds the device argument to dma_mapping_error.  The patch
is trivial but large since it touches lots of drivers and dma-mapping.h in
all the architecture.

This patch:

dma_mapping_error() doesn't take a pointer to the device unlike other DMA
operations.  So we can't have dma_mapping_ops per device.

Note that POWER already has dma_mapping_ops per device but all the POWER
IOMMUs use the same dma_mapping_error function.  x86 IOMMUs use device
argument.

[akpm@linux-foundation.org: fix sge]
[akpm@linux-foundation.org: fix svc_rdma]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix bnx2x]
[akpm@linux-foundation.org: fix s2io]
[akpm@linux-foundation.org: fix pasemi_mac]
[akpm@linux-foundation.org: fix sdhci]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix sparc]
[akpm@linux-foundation.org: fix ibmvscsi]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/DMA-API.txt                      |  4 +-
 arch/arm/common/dmabounce.c                    |  2 +-
 arch/ia64/hp/common/hwsw_iommu.c               |  5 +-
 arch/ia64/hp/common/sba_iommu.c                |  2 +-
 arch/ia64/sn/pci/pci_dma.c                     |  2 +-
 arch/mips/mm/dma-default.c                     |  2 +-
 arch/powerpc/platforms/cell/celleb_scc_pciex.c |  2 +-
 arch/powerpc/platforms/cell/spider-pci.c       |  2 +-
 arch/powerpc/platforms/iseries/mf.c            |  2 +-
 arch/x86/kernel/pci-calgary_64.c               |  2 +-
 arch/x86/kernel/pci-dma.c                      | 27 ++++---
 arch/x86/kernel/pci-gart_64.c                  |  3 +-
 arch/x86/kernel/pci-nommu.c                    | 14 +---
 arch/x86/kernel/pci-swiotlb_64.c               |  2 +-
 drivers/firewire/fw-iso.c                      |  2 +-
 drivers/firewire/fw-ohci.c                     |  2 +-
 drivers/firewire/fw-sbp2.c                     |  8 +--
 drivers/infiniband/hw/ipath/ipath_sdma.c       |  2 +-
 drivers/infiniband/hw/ipath/ipath_user_sdma.c  |  6 +-
 drivers/infiniband/hw/mthca/mthca_eq.c         |  2 +-
 drivers/media/dvb/pluto2/pluto2.c              |  2 +-
 drivers/mmc/host/sdhci.c                       |  4 +-
 drivers/net/arm/ep93xx_eth.c                   |  4 +-
 drivers/net/bnx2x_main.c                       |  4 +-
 drivers/net/cxgb3/sge.c                        |  2 +-
 drivers/net/e100.c                             |  2 +-
 drivers/net/e1000e/ethtool.c                   |  4 +-
 drivers/net/e1000e/netdev.c                    | 11 +--
 drivers/net/ibmveth.c                          | 38 +++++-----
 drivers/net/iseries_veth.c                     |  4 +-
 drivers/net/mlx4/eq.c                          |  2 +-
 drivers/net/pasemi_mac.c                       |  6 +-
 drivers/net/qla3xxx.c                          | 12 ++--
 drivers/net/s2io.c                             | 48 +++++++------
 drivers/net/sfc/rx.c                           |  4 +-
 drivers/net/sfc/tx.c                           |  7 +-
 drivers/net/spider_net.c                       |  4 +-
 drivers/net/tc35815.c                          |  4 +-
 drivers/net/wireless/ath5k/base.c              |  4 +-
 drivers/scsi/ibmvscsi/ibmvfc.c                 |  4 +-
 drivers/scsi/ibmvscsi/ibmvscsi.c               |  4 +-
 drivers/scsi/ibmvscsi/ibmvstgt.c               |  2 +-
 drivers/scsi/ibmvscsi/rpa_vscsi.c              |  2 +-
 drivers/spi/atmel_spi.c                        |  4 +-
 drivers/spi/au1550_spi.c                       |  6 +-
 drivers/spi/omap2_mcspi.c                      |  4 +-
 drivers/spi/pxa2xx_spi.c                       |  4 +-
 drivers/spi/spi_imx.c                          |  6 +-
 include/asm-alpha/dma-mapping.h                |  6 +-
 include/asm-alpha/pci.h                        |  2 +-
 include/asm-arm/dma-mapping.h                  |  2 +-
 include/asm-avr32/dma-mapping.h                |  2 +-
 include/asm-cris/dma-mapping.h                 |  2 +-
 include/asm-frv/dma-mapping.h                  |  2 +-
 include/asm-generic/dma-mapping-broken.h       |  2 +-
 include/asm-generic/dma-mapping.h              |  4 +-
 include/asm-generic/pci-dma-compat.h           |  4 +-
 include/asm-ia64/machvec.h                     |  2 +-
 include/asm-m68k/dma-mapping.h                 |  2 +-
 include/asm-mips/dma-mapping.h                 |  2 +-
 include/asm-mn10300/dma-mapping.h              |  2 +-
 include/asm-parisc/dma-mapping.h               |  2 +-
 include/asm-powerpc/dma-mapping.h              |  2 +-
 include/asm-sh/dma-mapping.h                   |  2 +-
 include/asm-sparc/dma-mapping_64.h             |  2 +-
 include/asm-sparc/pci_32.h                     |  3 +-
 include/asm-sparc/pci_64.h                     |  5 +-
 include/asm-x86/device.h                       |  3 +
 include/asm-x86/dma-mapping.h                  | 99 ++++++++++++++++++--------
 include/asm-x86/swiotlb.h                      |  2 +-
 include/asm-xtensa/dma-mapping.h               |  2 +-
 include/linux/i2o.h                            |  2 +-
 include/linux/ssb/ssb.h                        |  4 +-
 include/rdma/ib_verbs.h                        |  2 +-
 lib/swiotlb.c                                  |  4 +-
 net/sunrpc/xprtrdma/svc_rdma_sendto.c          |  3 +-
 76 files changed, 256 insertions(+), 210 deletions(-)

diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 80d150458c8..d8b63d164e4 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -298,10 +298,10 @@ recommended that you never use these unless you really know what the
 cache width is.
 
 int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 
 int
-pci_dma_mapping_error(dma_addr_t dma_addr)
+pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
 
 In some circumstances dma_map_single and dma_map_page will fail to create
 a mapping. A driver can check for these errors by testing the returned
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index dd294734260..69130f36590 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	/*
 	 * Trying to unmap an invalid mapping
 	 */
-	if (dma_mapping_error(dma_addr)) {
+	if (dma_mapping_error(dev, dma_addr)) {
 		dev_err(dev, "Trying to unmap invalid mapping\n");
 		return;
 	}
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 1c44ec2a1d5..88b6e6f3fd8 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -186,9 +186,10 @@ hwsw_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-hwsw_dma_mapping_error (dma_addr_t dma_addr)
+hwsw_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return hwiommu_dma_mapping_error (dma_addr) || swiotlb_dma_mapping_error(dma_addr);
+	return hwiommu_dma_mapping_error(dev, dma_addr) ||
+		swiotlb_dma_mapping_error(dev, dma_addr);
 }
 
 EXPORT_SYMBOL(hwsw_dma_mapping_error);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 34421aed1e2..4956be40d7b 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2147,7 +2147,7 @@ sba_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-sba_dma_mapping_error (dma_addr_t dma_addr)
+sba_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 52175af299a..53ebb648449 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -350,7 +350,7 @@ void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 }
 EXPORT_SYMBOL(sn_dma_sync_sg_for_device);
 
-int sn_dma_mapping_error(dma_addr_t dma_addr)
+int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index ae39dd88b9a..891312f8e5a 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -348,7 +348,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 
 EXPORT_SYMBOL(dma_sync_sg_for_device);
 
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 0e04f8fb152..3e7e0f1568e 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -281,7 +281,7 @@ static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data)
 
 	dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(bus->phb->parent, dummy_page_da)) {
 		pr_err("PCIEX:Map dummy page failed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index 418b605ac35..5122ec14527 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -111,7 +111,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
 
 	dummy_page_da = dma_map_single(phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(phb->parent, dummy_page_da)) {
 		pr_err("SPIDER-IOWA:Map dummy page filed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 1dc7295746d..731d7b15774 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -871,7 +871,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off,
 		count = 256 - off;
 
 	dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dma_addr))
+	if (dma_mapping_error(NULL, dma_addr))
 		return -ENOMEM;
 	memset(page, 0, off + count);
 	memset(&vsp_cmd, 0, sizeof(vsp_cmd));
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 19e7fc7c2c4..1eb86be93d7 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -544,7 +544,7 @@ error:
 	return ret;
 }
 
-static const struct dma_mapping_ops calgary_dma_ops = {
+static struct dma_mapping_ops calgary_dma_ops = {
 	.alloc_coherent = calgary_alloc_coherent,
 	.map_single = calgary_map_single,
 	.unmap_single = calgary_unmap_single,
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index cbecb05551b..37544123896 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -11,7 +11,7 @@
 
 static int forbid_dac __read_mostly;
 
-const struct dma_mapping_ops *dma_ops;
+struct dma_mapping_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 static int iommu_sac_force __read_mostly;
@@ -312,6 +312,8 @@ static int dma_release_coherent(struct device *dev, int order, void *vaddr)
 
 int dma_supported(struct device *dev, u64 mask)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 #ifdef CONFIG_PCI
 	if (mask > 0xffffffff && forbid_dac > 0) {
 		dev_info(dev, "PCI: Disallowing DAC for device\n");
@@ -319,8 +321,8 @@ int dma_supported(struct device *dev, u64 mask)
 	}
 #endif
 
-	if (dma_ops->dma_supported)
-		return dma_ops->dma_supported(dev, mask);
+	if (ops->dma_supported)
+		return ops->dma_supported(dev, mask);
 
 	/* Copied from i386. Doesn't make much sense, because it will
 	   only work for pci_alloc_coherent.
@@ -367,6 +369,7 @@ void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		   gfp_t gfp)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
 	void *memory = NULL;
 	struct page *page;
 	unsigned long dma_mask = 0;
@@ -435,8 +438,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 			/* Let low level make its own zone decisions */
 			gfp &= ~(GFP_DMA32|GFP_DMA);
 
-			if (dma_ops->alloc_coherent)
-				return dma_ops->alloc_coherent(dev, size,
+			if (ops->alloc_coherent)
+				return ops->alloc_coherent(dev, size,
 							   dma_handle, gfp);
 			return NULL;
 		}
@@ -448,14 +451,14 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		}
 	}
 
-	if (dma_ops->alloc_coherent) {
+	if (ops->alloc_coherent) {
 		free_pages((unsigned long)memory, get_order(size));
 		gfp &= ~(GFP_DMA|GFP_DMA32);
-		return dma_ops->alloc_coherent(dev, size, dma_handle, gfp);
+		return ops->alloc_coherent(dev, size, dma_handle, gfp);
 	}
 
-	if (dma_ops->map_simple) {
-		*dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory),
+	if (ops->map_simple) {
+		*dma_handle = ops->map_simple(dev, virt_to_phys(memory),
 					      size,
 					      PCI_DMA_BIDIRECTIONAL);
 		if (*dma_handle != bad_dma_address)
@@ -477,12 +480,14 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t bus)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	int order = get_order(size);
 	WARN_ON(irqs_disabled());	/* for portability */
 	if (dma_release_coherent(dev, order, vaddr))
 		return;
-	if (dma_ops->unmap_single)
-		dma_ops->unmap_single(dev, bus, size, 0);
+	if (ops->unmap_single)
+		ops->unmap_single(dev, bus, size, 0);
 	free_pages((unsigned long)vaddr, order);
 }
 EXPORT_SYMBOL(dma_free_coherent);
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index df5f142657d..744126e6495 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -692,8 +692,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 extern int agp_amd64_init(void);
 
-static const struct dma_mapping_ops gart_dma_ops = {
-	.mapping_error			= NULL,
+static struct dma_mapping_ops gart_dma_ops = {
 	.map_single			= gart_map_single,
 	.map_simple			= gart_map_simple,
 	.unmap_single			= gart_unmap_single,
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index 792b9179eff..3f91f71cdc3 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -72,21 +72,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
 	return nents;
 }
 
-/* Make sure we keep the same behaviour */
-static int nommu_mapping_error(dma_addr_t dma_addr)
-{
-#ifdef CONFIG_X86_32
-	return 0;
-#else
-	return (dma_addr == bad_dma_address);
-#endif
-}
-
-
-const struct dma_mapping_ops nommu_dma_ops = {
+struct dma_mapping_ops nommu_dma_ops = {
 	.map_single = nommu_map_single,
 	.map_sg = nommu_map_sg,
-	.mapping_error = nommu_mapping_error,
 	.is_phys = 1,
 };
 
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index 20df839b9c2..c4ce0332759 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -18,7 +18,7 @@ swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size,
 	return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction);
 }
 
-const struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_mapping_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
diff --git a/drivers/firewire/fw-iso.c b/drivers/firewire/fw-iso.c
index bcbe794a3ea..e14c03dc006 100644
--- a/drivers/firewire/fw-iso.c
+++ b/drivers/firewire/fw-iso.c
@@ -50,7 +50,7 @@ fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
 
 		address = dma_map_page(card->device, buffer->pages[i],
 				       0, PAGE_SIZE, direction);
-		if (dma_mapping_error(address)) {
+		if (dma_mapping_error(card->device, address)) {
 			__free_page(buffer->pages[i]);
 			goto out_pages;
 		}
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 333b12544dd..566672e0bcf 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -953,7 +953,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet)
 		payload_bus =
 			dma_map_single(ohci->card.device, packet->payload,
 				       packet->payload_length, DMA_TO_DEVICE);
-		if (dma_mapping_error(payload_bus)) {
+		if (dma_mapping_error(ohci->card.device, payload_bus)) {
 			packet->ack = RCODE_SEND_ERROR;
 			return -1;
 		}
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 53fc5a641e6..aaff50ebba1 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -543,7 +543,7 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 	orb->response_bus =
 		dma_map_single(device->card->device, &orb->response,
 			       sizeof(orb->response), DMA_FROM_DEVICE);
-	if (dma_mapping_error(orb->response_bus))
+	if (dma_mapping_error(device->card->device, orb->response_bus))
 		goto fail_mapping_response;
 
 	orb->request.response.high = 0;
@@ -577,7 +577,7 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id,
 	orb->base.request_bus =
 		dma_map_single(device->card->device, &orb->request,
 			       sizeof(orb->request), DMA_TO_DEVICE);
-	if (dma_mapping_error(orb->base.request_bus))
+	if (dma_mapping_error(device->card->device, orb->base.request_bus))
 		goto fail_mapping_request;
 
 	sbp2_send_orb(&orb->base, lu, node_id, generation,
@@ -1424,7 +1424,7 @@ sbp2_map_scatterlist(struct sbp2_command_orb *orb, struct fw_device *device,
 	orb->page_table_bus =
 		dma_map_single(device->card->device, orb->page_table,
 			       sizeof(orb->page_table), DMA_TO_DEVICE);
-	if (dma_mapping_error(orb->page_table_bus))
+	if (dma_mapping_error(device->card->device, orb->page_table_bus))
 		goto fail_page_table;
 
 	/*
@@ -1509,7 +1509,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	orb->base.request_bus =
 		dma_map_single(device->card->device, &orb->request,
 			       sizeof(orb->request), DMA_TO_DEVICE);
-	if (dma_mapping_error(orb->base.request_bus))
+	if (dma_mapping_error(device->card->device, orb->base.request_bus))
 		goto out;
 
 	sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, lu->generation,
diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c
index eaba03273e4..284c9bca517 100644
--- a/drivers/infiniband/hw/ipath/ipath_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_sdma.c
@@ -698,7 +698,7 @@ retry:
 
 	addr = dma_map_single(&dd->pcidev->dev, tx->txreq.map_addr,
 			      tx->map_len, DMA_TO_DEVICE);
-	if (dma_mapping_error(addr)) {
+	if (dma_mapping_error(&dd->pcidev->dev, addr)) {
 		ret = -EIO;
 		goto unlock;
 	}
diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.c b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
index 86e016916cd..82d9a0b5ca2 100644
--- a/drivers/infiniband/hw/ipath/ipath_user_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
@@ -206,7 +206,7 @@ static int ipath_user_sdma_coalesce(const struct ipath_devdata *dd,
 
 	dma_addr = dma_map_page(&dd->pcidev->dev, page, 0, len,
 				DMA_TO_DEVICE);
-	if (dma_mapping_error(dma_addr)) {
+	if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
 		ret = -ENOMEM;
 		goto free_unmap;
 	}
@@ -301,7 +301,7 @@ static int ipath_user_sdma_pin_pages(const struct ipath_devdata *dd,
 				     pages[j], 0, flen, DMA_TO_DEVICE);
 		unsigned long fofs = addr & ~PAGE_MASK;
 
-		if (dma_mapping_error(dma_addr)) {
+		if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
 			ret = -ENOMEM;
 			goto done;
 		}
@@ -508,7 +508,7 @@ static int ipath_user_sdma_queue_pkts(const struct ipath_devdata *dd,
 		if (page) {
 			dma_addr = dma_map_page(&dd->pcidev->dev,
 						page, 0, len, DMA_TO_DEVICE);
-			if (dma_mapping_error(dma_addr)) {
+			if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
 				ret = -ENOMEM;
 				goto free_pbc;
 			}
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index 4e36aa7cb3d..cc6858f0b65 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -780,7 +780,7 @@ int mthca_map_eq_icm(struct mthca_dev *dev, u64 icm_virt)
 		return -ENOMEM;
 	dev->eq_table.icm_dma  = pci_map_page(dev->pdev, dev->eq_table.icm_page, 0,
 					      PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
-	if (pci_dma_mapping_error(dev->eq_table.icm_dma)) {
+	if (pci_dma_mapping_error(dev->pdev, dev->eq_table.icm_dma)) {
 		__free_page(dev->eq_table.icm_page);
 		return -ENOMEM;
 	}
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 1360403b88b..a9653c63f4d 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -242,7 +242,7 @@ static int __devinit pluto_dma_map(struct pluto *pluto)
 	pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
 			TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
 
-	return pci_dma_mapping_error(pluto->dma_addr);
+	return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
 }
 
 static void pluto_dma_unmap(struct pluto *pluto)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c3a5db72ddd..5f95e10229b 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -337,7 +337,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 
 	host->align_addr = dma_map_single(mmc_dev(host->mmc),
 		host->align_buffer, 128 * 4, direction);
-	if (dma_mapping_error(host->align_addr))
+	if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
 		goto fail;
 	BUG_ON(host->align_addr & 0x3);
 
@@ -439,7 +439,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
 
 	host->adma_addr = dma_map_single(mmc_dev(host->mmc),
 		host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
-	if (dma_mapping_error(host->align_addr))
+	if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
 		goto unmap_entries;
 	BUG_ON(host->adma_addr & 0x3);
 
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 7a14980f347..18d3eeb7eab 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -482,7 +482,7 @@ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep)
 			goto err;
 
 		d = dma_map_single(NULL, page, PAGE_SIZE, DMA_FROM_DEVICE);
-		if (dma_mapping_error(d)) {
+		if (dma_mapping_error(NULL, d)) {
 			free_page((unsigned long)page);
 			goto err;
 		}
@@ -505,7 +505,7 @@ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep)
 			goto err;
 
 		d = dma_map_single(NULL, page, PAGE_SIZE, DMA_TO_DEVICE);
-		if (dma_mapping_error(d)) {
+		if (dma_mapping_error(NULL, d)) {
 			free_page((unsigned long)page);
 			goto err;
 		}
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 0263bef9cc6..c7cc760a177 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1020,7 +1020,7 @@ static inline int bnx2x_alloc_rx_sge(struct bnx2x *bp,
 
 	mapping = pci_map_page(bp->pdev, page, 0, BCM_PAGE_SIZE*PAGES_PER_SGE,
 			       PCI_DMA_FROMDEVICE);
-	if (unlikely(dma_mapping_error(mapping))) {
+	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 		__free_pages(page, PAGES_PER_SGE_SHIFT);
 		return -ENOMEM;
 	}
@@ -1048,7 +1048,7 @@ static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp,
 
 	mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size,
 				 PCI_DMA_FROMDEVICE);
-	if (unlikely(dma_mapping_error(mapping))) {
+	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 		dev_kfree_skb(skb);
 		return -ENOMEM;
 	}
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index a96331c875e..1b0861d73ab 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -386,7 +386,7 @@ static inline int add_one_rx_buf(void *va, unsigned int len,
 	dma_addr_t mapping;
 
 	mapping = pci_map_single(pdev, va, len, PCI_DMA_FROMDEVICE);
-	if (unlikely(pci_dma_mapping_error(mapping)))
+	if (unlikely(pci_dma_mapping_error(pdev, mapping)))
 		return -ENOMEM;
 
 	pci_unmap_addr_set(sd, dma_addr, mapping);
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 1037b133231..19d32a227be 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1790,7 +1790,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
 	rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
 		RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
 
-	if (pci_dma_mapping_error(rx->dma_addr)) {
+	if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
 		dev_kfree_skb_any(rx->skb);
 		rx->skb = NULL;
 		rx->dma_addr = 0;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index a14561f40db..9350564065e 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1090,7 +1090,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 		tx_ring->buffer_info[i].dma =
 			pci_map_single(pdev, skb->data, skb->len,
 				       PCI_DMA_TODEVICE);
-		if (pci_dma_mapping_error(tx_ring->buffer_info[i].dma)) {
+		if (pci_dma_mapping_error(pdev, tx_ring->buffer_info[i].dma)) {
 			ret_val = 4;
 			goto err_nomem;
 		}
@@ -1153,7 +1153,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 		rx_ring->buffer_info[i].dma =
 			pci_map_single(pdev, skb->data, 2048,
 				       PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(rx_ring->buffer_info[i].dma)) {
+		if (pci_dma_mapping_error(pdev, rx_ring->buffer_info[i].dma)) {
 			ret_val = 8;
 			goto err_nomem;
 		}
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 9c0f56b3c51..d1367789976 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -195,7 +195,7 @@ map_skb:
 		buffer_info->dma = pci_map_single(pdev, skb->data,
 						  adapter->rx_buffer_len,
 						  PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(buffer_info->dma)) {
+		if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
 			dev_err(&pdev->dev, "RX DMA map failed\n");
 			adapter->rx_dma_failed++;
 			break;
@@ -265,7 +265,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 						   ps_page->page,
 						   0, PAGE_SIZE,
 						   PCI_DMA_FROMDEVICE);
-				if (pci_dma_mapping_error(ps_page->dma)) {
+				if (pci_dma_mapping_error(pdev, ps_page->dma)) {
 					dev_err(&adapter->pdev->dev,
 					  "RX DMA page map failed\n");
 					adapter->rx_dma_failed++;
@@ -300,7 +300,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 		buffer_info->dma = pci_map_single(pdev, skb->data,
 						  adapter->rx_ps_bsize0,
 						  PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(buffer_info->dma)) {
+		if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
 			dev_err(&pdev->dev, "RX DMA map failed\n");
 			adapter->rx_dma_failed++;
 			/* cleanup skb */
@@ -3344,7 +3344,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 				skb->data + offset,
 				size,
 				PCI_DMA_TODEVICE);
-		if (pci_dma_mapping_error(buffer_info->dma)) {
+		if (pci_dma_mapping_error(adapter->pdev, buffer_info->dma)) {
 			dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
 			adapter->tx_dma_failed++;
 			return -1;
@@ -3382,7 +3382,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
 					offset,
 					size,
 					PCI_DMA_TODEVICE);
-			if (pci_dma_mapping_error(buffer_info->dma)) {
+			if (pci_dma_mapping_error(adapter->pdev,
+						  buffer_info->dma)) {
 				dev_err(&adapter->pdev->dev,
 					"TX DMA page map failed\n");
 				adapter->tx_dma_failed++;
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index e5a6e2e8454..91ec9fdc718 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -260,7 +260,7 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc
 		dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
 				pool->buff_size, DMA_FROM_DEVICE);
 
-		if (dma_mapping_error(dma_addr))
+		if (dma_mapping_error((&adapter->vdev->dev, dma_addr))
 			goto failure;
 
 		pool->free_map[free_index] = IBM_VETH_INVALID_MAP;
@@ -294,7 +294,7 @@ failure:
 		pool->consumer_index = pool->size - 1;
 	else
 		pool->consumer_index--;
-	if (!dma_mapping_error(dma_addr))
+	if (!dma_mapping_error((&adapter->vdev->dev, dma_addr))
 		dma_unmap_single(&adapter->vdev->dev,
 		                 pool->dma_addr[index], pool->buff_size,
 		                 DMA_FROM_DEVICE);
@@ -448,11 +448,11 @@ static void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter)
 static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 {
 	int i;
+	struct device *dev = &adapter->vdev->dev;
 
 	if(adapter->buffer_list_addr != NULL) {
-		if(!dma_mapping_error(adapter->buffer_list_dma)) {
-			dma_unmap_single(&adapter->vdev->dev,
-					adapter->buffer_list_dma, 4096,
+		if (!dma_mapping_error(dev, adapter->buffer_list_dma)) {
+			dma_unmap_single(dev, adapter->buffer_list_dma, 4096,
 					DMA_BIDIRECTIONAL);
 			adapter->buffer_list_dma = DMA_ERROR_CODE;
 		}
@@ -461,9 +461,8 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 	}
 
 	if(adapter->filter_list_addr != NULL) {
-		if(!dma_mapping_error(adapter->filter_list_dma)) {
-			dma_unmap_single(&adapter->vdev->dev,
-					adapter->filter_list_dma, 4096,
+		if (!dma_mapping_error(dev, adapter->filter_list_dma)) {
+			dma_unmap_single(dev, adapter->filter_list_dma, 4096,
 					DMA_BIDIRECTIONAL);
 			adapter->filter_list_dma = DMA_ERROR_CODE;
 		}
@@ -472,8 +471,8 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 	}
 
 	if(adapter->rx_queue.queue_addr != NULL) {
-		if(!dma_mapping_error(adapter->rx_queue.queue_dma)) {
-			dma_unmap_single(&adapter->vdev->dev,
+		if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) {
+			dma_unmap_single(dev,
 					adapter->rx_queue.queue_dma,
 					adapter->rx_queue.queue_len,
 					DMA_BIDIRECTIONAL);
@@ -535,6 +534,7 @@ static int ibmveth_open(struct net_device *netdev)
 	int rc;
 	union ibmveth_buf_desc rxq_desc;
 	int i;
+	struct device *dev;
 
 	ibmveth_debug_printk("open starting\n");
 
@@ -563,17 +563,19 @@ static int ibmveth_open(struct net_device *netdev)
 		return -ENOMEM;
 	}
 
-	adapter->buffer_list_dma = dma_map_single(&adapter->vdev->dev,
+	dev = &adapter->vdev->dev;
+
+	adapter->buffer_list_dma = dma_map_single(dev,
 			adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL);
-	adapter->filter_list_dma = dma_map_single(&adapter->vdev->dev,
+	adapter->filter_list_dma = dma_map_single(dev,
 			adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL);
-	adapter->rx_queue.queue_dma = dma_map_single(&adapter->vdev->dev,
+	adapter->rx_queue.queue_dma = dma_map_single(dev,
 			adapter->rx_queue.queue_addr,
 			adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL);
 
-	if((dma_mapping_error(adapter->buffer_list_dma) ) ||
-	   (dma_mapping_error(adapter->filter_list_dma)) ||
-	   (dma_mapping_error(adapter->rx_queue.queue_dma))) {
+	if ((dma_mapping_error(dev, adapter->buffer_list_dma)) ||
+	    (dma_mapping_error(dev, adapter->filter_list_dma)) ||
+	    (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) {
 		ibmveth_error_printk("unable to map filter or buffer list pages\n");
 		ibmveth_cleanup(adapter);
 		napi_disable(&adapter->napi);
@@ -645,7 +647,7 @@ static int ibmveth_open(struct net_device *netdev)
 	adapter->bounce_buffer_dma =
 	    dma_map_single(&adapter->vdev->dev, adapter->bounce_buffer,
 			   netdev->mtu + IBMVETH_BUFF_OH, DMA_BIDIRECTIONAL);
-	if (dma_mapping_error(adapter->bounce_buffer_dma)) {
+	if (dma_mapping_error(dev, adapter->bounce_buffer_dma)) {
 		ibmveth_error_printk("unable to map bounce buffer\n");
 		ibmveth_cleanup(adapter);
 		napi_disable(&adapter->napi);
@@ -922,7 +924,7 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		buf[1] = 0;
 	}
 
-	if (dma_mapping_error(data_dma_addr)) {
+	if (dma_mapping_error((&adapter->vdev->dev, data_dma_addr)) {
 		if (!firmware_has_feature(FW_FEATURE_CMO))
 			ibmveth_error_printk("tx: unable to map xmit buffer\n");
 		skb_copy_from_linear_data(skb, adapter->bounce_buffer,
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index b8d0639c1cd..c46864d626b 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1128,7 +1128,7 @@ static int veth_transmit_to_one(struct sk_buff *skb, HvLpIndex rlp,
 	msg->data.addr[0] = dma_map_single(port->dev, skb->data,
 				skb->len, DMA_TO_DEVICE);
 
-	if (dma_mapping_error(msg->data.addr[0]))
+	if (dma_mapping_error(port->dev, msg->data.addr[0]))
 		goto recycle_and_drop;
 
 	msg->dev = port->dev;
@@ -1226,7 +1226,7 @@ static void veth_recycle_msg(struct veth_lpar_connection *cnx,
 		dma_address = msg->data.addr[0];
 		dma_length = msg->data.len[0];
 
-		if (!dma_mapping_error(dma_address))
+		if (!dma_mapping_error(msg->dev, dma_address))
 			dma_unmap_single(msg->dev, dma_address, dma_length,
 					DMA_TO_DEVICE);
 
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index ea3a09aaa84..7df928d3a3d 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -526,7 +526,7 @@ int mlx4_map_eq_icm(struct mlx4_dev *dev, u64 icm_virt)
 		return -ENOMEM;
 	priv->eq_table.icm_dma  = pci_map_page(dev->pdev, priv->eq_table.icm_page, 0,
 					       PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
-	if (pci_dma_mapping_error(priv->eq_table.icm_dma)) {
+	if (pci_dma_mapping_error(dev->pdev, priv->eq_table.icm_dma)) {
 		__free_page(priv->eq_table.icm_page);
 		return -ENOMEM;
 	}
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 993d87c9296..edc0fd58898 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -650,7 +650,7 @@ static void pasemi_mac_replenish_rx_ring(const struct net_device *dev,
 				     mac->bufsz - LOCAL_SKB_ALIGN,
 				     PCI_DMA_FROMDEVICE);
 
-		if (unlikely(dma_mapping_error(dma))) {
+		if (unlikely(pci_dma_mapping_error(mac->dma_pdev, dma))) {
 			dev_kfree_skb_irq(info->skb);
 			break;
 		}
@@ -1519,7 +1519,7 @@ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
 	map[0] = pci_map_single(mac->dma_pdev, skb->data, skb_headlen(skb),
 				PCI_DMA_TODEVICE);
 	map_size[0] = skb_headlen(skb);
-	if (dma_mapping_error(map[0]))
+	if (pci_dma_mapping_error(mac->dma_pdev, map[0]))
 		goto out_err_nolock;
 
 	for (i = 0; i < nfrags; i++) {
@@ -1529,7 +1529,7 @@ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
 					frag->page_offset, frag->size,
 					PCI_DMA_TODEVICE);
 		map_size[i+1] = frag->size;
-		if (dma_mapping_error(map[i+1])) {
+		if (pci_dma_mapping_error(mac->dma_pdev, map[i+1])) {
 			nfrags = i;
 			goto out_err_nolock;
 		}
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index e7d48a352be..e82b37bbd6c 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -328,7 +328,7 @@ static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev,
 					     qdev->lrg_buffer_len -
 					     QL_HEADER_SPACE,
 					     PCI_DMA_FROMDEVICE);
-			err = pci_dma_mapping_error(map);
+			err = pci_dma_mapping_error(qdev->pdev, map);
 			if(err) {
 				printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
 				       qdev->ndev->name, err);
@@ -1919,7 +1919,7 @@ static int ql_populate_free_queue(struct ql3_adapter *qdev)
 						     QL_HEADER_SPACE,
 						     PCI_DMA_FROMDEVICE);
 
-				err = pci_dma_mapping_error(map);
+				err = pci_dma_mapping_error(qdev->pdev, map);
 				if(err) {
 					printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
 					       qdev->ndev->name, err);
@@ -2454,7 +2454,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
 	 */
 	map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
 
-	err = pci_dma_mapping_error(map);
+	err = pci_dma_mapping_error(qdev->pdev, map);
 	if(err) {
 		printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
 		       qdev->ndev->name, err);
@@ -2487,7 +2487,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
 						     sizeof(struct oal),
 						     PCI_DMA_TODEVICE);
 
-				err = pci_dma_mapping_error(map);
+				err = pci_dma_mapping_error(qdev->pdev, map);
 				if(err) {
 
 					printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n",
@@ -2514,7 +2514,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
 					 frag->page_offset, frag->size,
 					 PCI_DMA_TODEVICE);
 
-			err = pci_dma_mapping_error(map);
+			err = pci_dma_mapping_error(qdev->pdev, map);
 			if(err) {
 				printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n",
 				       qdev->ndev->name, err);
@@ -2916,7 +2916,7 @@ static int ql_alloc_large_buffers(struct ql3_adapter *qdev)
 					     QL_HEADER_SPACE,
 					     PCI_DMA_FROMDEVICE);
 
-			err = pci_dma_mapping_error(map);
+			err = pci_dma_mapping_error(qdev->pdev, map);
 			if(err) {
 				printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
 				       qdev->ndev->name, err);
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 9dae40ccf04..86d77d05190 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -2512,8 +2512,8 @@ static void stop_nic(struct s2io_nic *nic)
  *   Return Value:
  *  SUCCESS on success or an appropriate -ve value on failure.
  */
-
-static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
+static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring,
+				int from_card_up)
 {
 	struct sk_buff *skb;
 	struct RxD_t *rxdp;
@@ -2602,7 +2602,8 @@ static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
 			rxdp1->Buffer0_ptr = pci_map_single
 			    (ring->pdev, skb->data, size - NET_IP_ALIGN,
 				PCI_DMA_FROMDEVICE);
-			if(pci_dma_mapping_error(rxdp1->Buffer0_ptr))
+			if (pci_dma_mapping_error(nic->pdev,
+						rxdp1->Buffer0_ptr))
 				goto pci_map_failed;
 
 			rxdp->Control_2 =
@@ -2636,7 +2637,8 @@ static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
 				rxdp3->Buffer0_ptr =
 				   pci_map_single(ring->pdev, ba->ba_0,
 					BUF0_LEN, PCI_DMA_FROMDEVICE);
-				if (pci_dma_mapping_error(rxdp3->Buffer0_ptr))
+			if (pci_dma_mapping_error(nic->pdev,
+						rxdp3->Buffer0_ptr))
 					goto pci_map_failed;
 			} else
 				pci_dma_sync_single_for_device(ring->pdev,
@@ -2655,7 +2657,8 @@ static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
 				(ring->pdev, skb->data, ring->mtu + 4,
 						PCI_DMA_FROMDEVICE);
 
-				if (pci_dma_mapping_error(rxdp3->Buffer2_ptr))
+				if (pci_dma_mapping_error(nic->pdev,
+							rxdp3->Buffer2_ptr))
 					goto pci_map_failed;
 
 				if (from_card_up) {
@@ -2664,8 +2667,8 @@ static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
 						ba->ba_1, BUF1_LEN,
 						PCI_DMA_FROMDEVICE);
 
-					if (pci_dma_mapping_error
-						(rxdp3->Buffer1_ptr)) {
+					if (pci_dma_mapping_error(nic->pdev,
+						rxdp3->Buffer1_ptr)) {
 						pci_unmap_single
 							(ring->pdev,
 						    (dma_addr_t)(unsigned long)
@@ -2806,9 +2809,9 @@ static void free_rx_buffers(struct s2io_nic *sp)
 	}
 }
 
-static int s2io_chk_rx_buffers(struct ring_info *ring)
+static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
 {
-	if (fill_rx_buffers(ring, 0) == -ENOMEM) {
+	if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
 		DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
 		DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
 	}
@@ -2848,7 +2851,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget)
 		return 0;
 
 	pkts_processed = rx_intr_handler(ring, budget);
-	s2io_chk_rx_buffers(ring);
+	s2io_chk_rx_buffers(nic, ring);
 
 	if (pkts_processed < budget_org) {
 		netif_rx_complete(dev, napi);
@@ -2882,7 +2885,7 @@ static int s2io_poll_inta(struct napi_struct *napi, int budget)
 	for (i = 0; i < config->rx_ring_num; i++) {
 		ring = &mac_control->rings[i];
 		ring_pkts_processed = rx_intr_handler(ring, budget);
-		s2io_chk_rx_buffers(ring);
+		s2io_chk_rx_buffers(nic, ring);
 		pkts_processed += ring_pkts_processed;
 		budget -= ring_pkts_processed;
 		if (budget <= 0)
@@ -2939,7 +2942,8 @@ static void s2io_netpoll(struct net_device *dev)
 		rx_intr_handler(&mac_control->rings[i], 0);
 
 	for (i = 0; i < config->rx_ring_num; i++) {
-		if (fill_rx_buffers(&mac_control->rings[i], 0) == -ENOMEM) {
+		if (fill_rx_buffers(nic, &mac_control->rings[i], 0) ==
+				-ENOMEM) {
 			DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
 			DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
 			break;
@@ -4235,14 +4239,14 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 		txdp->Buffer_Pointer = pci_map_single(sp->pdev,
 					fifo->ufo_in_band_v,
 					sizeof(u64), PCI_DMA_TODEVICE);
-		if (pci_dma_mapping_error(txdp->Buffer_Pointer))
+		if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
 			goto pci_map_failed;
 		txdp++;
 	}
 
 	txdp->Buffer_Pointer = pci_map_single
 	    (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
-	if (pci_dma_mapping_error(txdp->Buffer_Pointer))
+	if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
 		goto pci_map_failed;
 
 	txdp->Host_Control = (unsigned long) skb;
@@ -4345,7 +4349,7 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
 		netif_rx_schedule(dev, &ring->napi);
 	} else {
 		rx_intr_handler(ring, 0);
-		s2io_chk_rx_buffers(ring);
+		s2io_chk_rx_buffers(sp, ring);
 	}
 
 	return IRQ_HANDLED;
@@ -4826,7 +4830,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id)
 		 */
 		if (!config->napi) {
 			for (i = 0; i < config->rx_ring_num; i++)
-				s2io_chk_rx_buffers(&mac_control->rings[i]);
+				s2io_chk_rx_buffers(sp, &mac_control->rings[i]);
 		}
 		writeq(sp->general_int_mask, &bar0->general_int_mask);
 		readl(&bar0->general_int_status);
@@ -6859,7 +6863,7 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
 				pci_map_single( sp->pdev, (*skb)->data,
 					size - NET_IP_ALIGN,
 					PCI_DMA_FROMDEVICE);
-			if (pci_dma_mapping_error(rxdp1->Buffer0_ptr))
+			if (pci_dma_mapping_error(sp->pdev, rxdp1->Buffer0_ptr))
 				goto memalloc_failed;
 			rxdp->Host_Control = (unsigned long) (*skb);
 		}
@@ -6886,12 +6890,13 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
 				pci_map_single(sp->pdev, (*skb)->data,
 					       dev->mtu + 4,
 					       PCI_DMA_FROMDEVICE);
-			if (pci_dma_mapping_error(rxdp3->Buffer2_ptr))
+			if (pci_dma_mapping_error(sp->pdev, rxdp3->Buffer2_ptr))
 				goto memalloc_failed;
 			rxdp3->Buffer0_ptr = *temp0 =
 				pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
 						PCI_DMA_FROMDEVICE);
-			if (pci_dma_mapping_error(rxdp3->Buffer0_ptr)) {
+			if (pci_dma_mapping_error(sp->pdev,
+						rxdp3->Buffer0_ptr)) {
 				pci_unmap_single (sp->pdev,
 					(dma_addr_t)rxdp3->Buffer2_ptr,
 					dev->mtu + 4, PCI_DMA_FROMDEVICE);
@@ -6903,7 +6908,8 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
 			rxdp3->Buffer1_ptr = *temp1 =
 				pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
 						PCI_DMA_FROMDEVICE);
-			if (pci_dma_mapping_error(rxdp3->Buffer1_ptr)) {
+			if (pci_dma_mapping_error(sp->pdev,
+						rxdp3->Buffer1_ptr)) {
 				pci_unmap_single (sp->pdev,
 					(dma_addr_t)rxdp3->Buffer0_ptr,
 					BUF0_LEN, PCI_DMA_FROMDEVICE);
@@ -7187,7 +7193,7 @@ static int s2io_card_up(struct s2io_nic * sp)
 
 	for (i = 0; i < config->rx_ring_num; i++) {
 		mac_control->rings[i].mtu = dev->mtu;
-		ret = fill_rx_buffers(&mac_control->rings[i], 1);
+		ret = fill_rx_buffers(sp, &mac_control->rings[i], 1);
 		if (ret) {
 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
 				  dev->name);
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 601b001437c..0d27dd39bc0 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -233,7 +233,7 @@ static inline int efx_init_rx_buffer_skb(struct efx_rx_queue *rx_queue,
 					  rx_buf->data, rx_buf->len,
 					  PCI_DMA_FROMDEVICE);
 
-	if (unlikely(pci_dma_mapping_error(rx_buf->dma_addr))) {
+	if (unlikely(pci_dma_mapping_error(efx->pci_dev, rx_buf->dma_addr))) {
 		dev_kfree_skb_any(rx_buf->skb);
 		rx_buf->skb = NULL;
 		return -EIO;
@@ -275,7 +275,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue,
 					0, efx_rx_buf_size(efx),
 					PCI_DMA_FROMDEVICE);
 
-		if (unlikely(pci_dma_mapping_error(dma_addr))) {
+		if (unlikely(pci_dma_mapping_error(efx->pci_dev, dma_addr))) {
 			__free_pages(rx_buf->page, efx->rx_buffer_order);
 			rx_buf->page = NULL;
 			return -EIO;
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index 5cdd082ab8f..5e8374ab28e 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -172,7 +172,7 @@ static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue,
 
 	/* Process all fragments */
 	while (1) {
-		if (unlikely(pci_dma_mapping_error(dma_addr)))
+		if (unlikely(pci_dma_mapping_error(pci_dev, dma_addr)))
 			goto pci_err;
 
 		/* Store fields for marking in the per-fragment final
@@ -661,7 +661,8 @@ efx_tsoh_heap_alloc(struct efx_tx_queue *tx_queue, size_t header_len)
 	tsoh->dma_addr = pci_map_single(tx_queue->efx->pci_dev,
 					TSOH_BUFFER(tsoh), header_len,
 					PCI_DMA_TODEVICE);
-	if (unlikely(pci_dma_mapping_error(tsoh->dma_addr))) {
+	if (unlikely(pci_dma_mapping_error(tx_queue->efx->pci_dev,
+					   tsoh->dma_addr))) {
 		kfree(tsoh);
 		return NULL;
 	}
@@ -863,7 +864,7 @@ static inline int tso_get_fragment(struct tso_state *st, struct efx_nic *efx,
 
 	st->ifc.unmap_addr = pci_map_page(efx->pci_dev, page, page_off,
 					  len, PCI_DMA_TODEVICE);
-	if (likely(!pci_dma_mapping_error(st->ifc.unmap_addr))) {
+	if (likely(!pci_dma_mapping_error(efx->pci_dev, st->ifc.unmap_addr))) {
 		st->ifc.unmap_len = len;
 		st->ifc.len = len;
 		st->ifc.dma_addr = st->ifc.unmap_addr;
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 00aa0b108cb..b6435d0d71f 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -452,7 +452,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
 	/* iommu-map the skb */
 	buf = pci_map_single(card->pdev, descr->skb->data,
 			SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
-	if (pci_dma_mapping_error(buf)) {
+	if (pci_dma_mapping_error(card->pdev, buf)) {
 		dev_kfree_skb_any(descr->skb);
 		descr->skb = NULL;
 		if (netif_msg_rx_err(card) && net_ratelimit())
@@ -691,7 +691,7 @@ spider_net_prepare_tx_descr(struct spider_net_card *card,
 	unsigned long flags;
 
 	buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
-	if (pci_dma_mapping_error(buf)) {
+	if (pci_dma_mapping_error(card->pdev, buf)) {
 		if (netif_msg_tx_err(card) && net_ratelimit())
 			dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). "
 				  "Dropping packet\n", skb->data, skb->len);
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index a645e5028c1..8487ace9d2e 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -506,7 +506,7 @@ static void *alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle)
 		return NULL;
 	*dma_handle = pci_map_single(hwdev, buf, PAGE_SIZE,
 				     PCI_DMA_FROMDEVICE);
-	if (pci_dma_mapping_error(*dma_handle)) {
+	if (pci_dma_mapping_error(hwdev, *dma_handle)) {
 		free_page((unsigned long)buf);
 		return NULL;
 	}
@@ -536,7 +536,7 @@ static struct sk_buff *alloc_rxbuf_skb(struct net_device *dev,
 		return NULL;
 	*dma_handle = pci_map_single(hwdev, skb->data, RX_BUF_SIZE,
 				     PCI_DMA_FROMDEVICE);
-	if (pci_dma_mapping_error(*dma_handle)) {
+	if (pci_dma_mapping_error(hwdev, *dma_handle)) {
 		dev_kfree_skb_any(skb);
 		return NULL;
 	}
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 217d506527a..d9769c52734 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1166,7 +1166,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 		bf->skb = skb;
 		bf->skbaddr = pci_map_single(sc->pdev,
 			skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
-		if (unlikely(pci_dma_mapping_error(bf->skbaddr))) {
+		if (unlikely(pci_dma_mapping_error(sc->pdev, bf->skbaddr))) {
 			ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
 			dev_kfree_skb(skb);
 			bf->skb = NULL;
@@ -1918,7 +1918,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
 			"skbaddr %llx\n", skb, skb->data, skb->len,
 			(unsigned long long)bf->skbaddr);
-	if (pci_dma_mapping_error(bf->skbaddr)) {
+	if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
 		ATH5K_ERR(sc, "beacon DMA mapping failed\n");
 		return -EIO;
 	}
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index c4a7c06793c..61f8fdea2d9 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3525,7 +3525,7 @@ static int ibmvfc_init_crq(struct ibmvfc_host *vhost)
 	crq->msg_token = dma_map_single(dev, crq->msgs,
 					PAGE_SIZE, DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(crq->msg_token))
+	if (dma_mapping_error(dev, crq->msg_token))
 		goto map_failed;
 
 	retrc = rc = plpar_hcall_norets(H_REG_CRQ, vdev->unit_address,
@@ -3618,7 +3618,7 @@ static int ibmvfc_alloc_mem(struct ibmvfc_host *vhost)
 					    async_q->size * sizeof(*async_q->msgs),
 					    DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(async_q->msg_token)) {
+	if (dma_mapping_error(dev, async_q->msg_token)) {
 		dev_err(dev, "Failed to map async queue\n");
 		goto free_async_crq;
 	}
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 20000ec79b0..6b24b9cdb04 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -859,7 +859,7 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 					    sizeof(hostdata->madapter_info),
 					    DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(req->buffer)) {
+	if (dma_mapping_error(hostdata->dev, req->buffer)) {
 		if (!firmware_has_feature(FW_FEATURE_CMO))
 			dev_err(hostdata->dev,
 			        "Unable to map request_buffer for "
@@ -1407,7 +1407,7 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 						    length,
 						    DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(host_config->buffer)) {
+	if (dma_mapping_error(hostdata->dev, host_config->buffer)) {
 		if (!firmware_has_feature(FW_FEATURE_CMO))
 			dev_err(hostdata->dev,
 			        "dma_mapping error getting host config\n");
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index 3b9514c8f1f..2e13ec00172 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -564,7 +564,7 @@ static int crq_queue_create(struct crq_queue *queue, struct srp_target *target)
 					  queue->size * sizeof(*queue->msgs),
 					  DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(queue->msg_token))
+	if (dma_mapping_error(target->dev, queue->msg_token))
 		goto map_failed;
 
 	err = h_reg_crq(vport->dma_dev->unit_address, queue->msg_token,
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index 182146100dc..462a8574dad 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -253,7 +253,7 @@ static int rpavscsi_init_crq_queue(struct crq_queue *queue,
 					  queue->size * sizeof(*queue->msgs),
 					  DMA_BIDIRECTIONAL);
 
-	if (dma_mapping_error(queue->msg_token))
+	if (dma_mapping_error(hostdata->dev, queue->msg_token))
 		goto map_failed;
 
 	gather_partition_info();
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index e81d59d7891..0c716566085 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -313,14 +313,14 @@ atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
 		xfer->tx_dma = dma_map_single(dev,
 				(void *) xfer->tx_buf, xfer->len,
 				DMA_TO_DEVICE);
-		if (dma_mapping_error(xfer->tx_dma))
+		if (dma_mapping_error(dev, xfer->tx_dma))
 			return -ENOMEM;
 	}
 	if (xfer->rx_buf) {
 		xfer->rx_dma = dma_map_single(dev,
 				xfer->rx_buf, xfer->len,
 				DMA_FROM_DEVICE);
-		if (dma_mapping_error(xfer->rx_dma)) {
+		if (dma_mapping_error(dev, xfer->rx_dma)) {
 			if (xfer->tx_buf)
 				dma_unmap_single(dev,
 						xfer->tx_dma, xfer->len,
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 9149689c79d..87b73e0169c 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -334,7 +334,7 @@ static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned size)
 	hw->dma_rx_tmpbuf_size = size;
 	hw->dma_rx_tmpbuf_addr = dma_map_single(hw->dev, hw->dma_rx_tmpbuf,
 			size, DMA_FROM_DEVICE);
-	if (dma_mapping_error(hw->dma_rx_tmpbuf_addr)) {
+	if (dma_mapping_error(hw->dev, hw->dma_rx_tmpbuf_addr)) {
 		kfree(hw->dma_rx_tmpbuf);
 		hw->dma_rx_tmpbuf = 0;
 		hw->dma_rx_tmpbuf_size = 0;
@@ -378,7 +378,7 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
 			dma_rx_addr = dma_map_single(hw->dev,
 					(void *)t->rx_buf,
 					t->len, DMA_FROM_DEVICE);
-			if (dma_mapping_error(dma_rx_addr))
+			if (dma_mapping_error(hw->dev, dma_rx_addr))
 				dev_err(hw->dev, "rx dma map error\n");
 		}
 	} else {
@@ -401,7 +401,7 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
 			dma_tx_addr = dma_map_single(hw->dev,
 					(void *)t->tx_buf,
 					t->len, DMA_TO_DEVICE);
-			if (dma_mapping_error(dma_tx_addr))
+			if (dma_mapping_error(hw->dev, dma_tx_addr))
 				dev_err(hw->dev, "tx dma map error\n");
 		}
 	} else {
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index b1cc148036c..f6f987bb71c 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -836,7 +836,7 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
 		if (tx_buf != NULL) {
 			t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf,
 					len, DMA_TO_DEVICE);
-			if (dma_mapping_error(t->tx_dma)) {
+			if (dma_mapping_error(&spi->dev, t->tx_dma)) {
 				dev_dbg(&spi->dev, "dma %cX %d bytes error\n",
 						'T', len);
 				return -EINVAL;
@@ -845,7 +845,7 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
 		if (rx_buf != NULL) {
 			t->rx_dma = dma_map_single(&spi->dev, rx_buf, t->len,
 					DMA_FROM_DEVICE);
-			if (dma_mapping_error(t->rx_dma)) {
+			if (dma_mapping_error(&spi->dev, t->rx_dma)) {
 				dev_dbg(&spi->dev, "dma %cX %d bytes error\n",
 						'R', len);
 				if (tx_buf != NULL)
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 0c452c46ab0..067299d6d19 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -353,7 +353,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 	drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
 						drv_data->rx_map_len,
 						DMA_FROM_DEVICE);
-	if (dma_mapping_error(drv_data->rx_dma))
+	if (dma_mapping_error(dev, drv_data->rx_dma))
 		return 0;
 
 	/* Stream map the tx buffer */
@@ -361,7 +361,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 						drv_data->tx_map_len,
 						DMA_TO_DEVICE);
 
-	if (dma_mapping_error(drv_data->tx_dma)) {
+	if (dma_mapping_error(dev, drv_data->tx_dma)) {
 		dma_unmap_single(dev, drv_data->rx_dma,
 					drv_data->rx_map_len, DMA_FROM_DEVICE);
 		return 0;
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 54ac7bea5f8..6fb77fcc497 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -491,7 +491,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 							buf,
 							drv_data->tx_map_len,
 							DMA_TO_DEVICE);
-			if (dma_mapping_error(drv_data->tx_dma))
+			if (dma_mapping_error(dev, drv_data->tx_dma))
 				return -1;
 
 			drv_data->tx_dma_needs_unmap = 1;
@@ -516,7 +516,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 					buf,
 					drv_data->len,
 					DMA_FROM_DEVICE);
-		if (dma_mapping_error(drv_data->rx_dma))
+		if (dma_mapping_error(dev, drv_data->rx_dma))
 			return -1;
 		drv_data->rx_dma_needs_unmap = 1;
 	}
@@ -534,7 +534,7 @@ static int map_dma_buffers(struct driver_data *drv_data)
 					buf,
 					drv_data->tx_map_len,
 					DMA_TO_DEVICE);
-	if (dma_mapping_error(drv_data->tx_dma)) {
+	if (dma_mapping_error(dev, drv_data->tx_dma)) {
 		if (drv_data->rx_dma) {
 			dma_unmap_single(dev,
 					drv_data->rx_dma,
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h
index db351d1296f..a5801ae02e4 100644
--- a/include/asm-alpha/dma-mapping.h
+++ b/include/asm-alpha/dma-mapping.h
@@ -24,8 +24,8 @@
 		pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
 #define dma_supported(dev, mask)			\
 		pci_dma_supported(alpha_gendev_to_pci(dev), mask)
-#define dma_mapping_error(addr)				\
-		pci_dma_mapping_error(addr)
+#define dma_mapping_error(dev, addr)				\
+		pci_dma_mapping_error(alpha_gendev_to_pci(dev), addr)
 
 #else	/* no PCI - no IOMMU. */
 
@@ -45,7 +45,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 #define dma_unmap_page(dev, addr, size, dir)	((void)0)
 #define dma_unmap_sg(dev, sg, nents, dir)	((void)0)
 
-#define dma_mapping_error(addr)  (0)
+#define dma_mapping_error(dev, addr)  (0)
 
 #endif	/* !CONFIG_PCI */
 
diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
index d31fd49ff79..2a14302c17a 100644
--- a/include/asm-alpha/pci.h
+++ b/include/asm-alpha/pci.h
@@ -106,7 +106,7 @@ extern dma_addr_t pci_map_page(struct pci_dev *, struct page *,
 /* Test for pci_map_single or pci_map_page having generated an error.  */
 
 static inline int
-pci_dma_mapping_error(dma_addr_t dma_addr)
+pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
 {
 	return dma_addr == 0;
 }
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
index e99406a7bec..f41335ba633 100644
--- a/include/asm-arm/dma-mapping.h
+++ b/include/asm-arm/dma-mapping.h
@@ -56,7 +56,7 @@ static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
 /*
  * DMA errors are defined by all-bits-set in the DMA address.
  */
-static inline int dma_mapping_error(dma_addr_t dma_addr)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return dma_addr == ~0;
 }
diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
index 57dc672bab8..0399359ab5d 100644
--- a/include/asm-avr32/dma-mapping.h
+++ b/include/asm-avr32/dma-mapping.h
@@ -35,7 +35,7 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 /*
  * dma_map_single can't fail as it is implemented now.
  */
-static inline int dma_mapping_error(dma_addr_t addr)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t addr)
 {
 	return 0;
 }
diff --git a/include/asm-cris/dma-mapping.h b/include/asm-cris/dma-mapping.h
index edc8d1bfaae..cb2fb25ff8d 100644
--- a/include/asm-cris/dma-mapping.h
+++ b/include/asm-cris/dma-mapping.h
@@ -120,7 +120,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
 }
 
 static inline int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-frv/dma-mapping.h b/include/asm-frv/dma-mapping.h
index 2e8966ca030..b2898877c07 100644
--- a/include/asm-frv/dma-mapping.h
+++ b/include/asm-frv/dma-mapping.h
@@ -126,7 +126,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 }
 
 static inline
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h
index e2468f894d2..82cd0cb1c3f 100644
--- a/include/asm-generic/dma-mapping-broken.h
+++ b/include/asm-generic/dma-mapping-broken.h
@@ -61,7 +61,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 #define dma_sync_sg_for_device dma_sync_sg_for_cpu
 
 extern int
-dma_mapping_error(dma_addr_t dma_addr);
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
 
 extern int
 dma_supported(struct device *dev, u64 mask);
diff --git a/include/asm-generic/dma-mapping.h b/include/asm-generic/dma-mapping.h
index 783ab9944d7..189486c3f92 100644
--- a/include/asm-generic/dma-mapping.h
+++ b/include/asm-generic/dma-mapping.h
@@ -144,9 +144,9 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
 }
 
 static inline int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return pci_dma_mapping_error(dma_addr);
+	return pci_dma_mapping_error(to_pci_dev(dev), dma_addr);
 }
 
 
diff --git a/include/asm-generic/pci-dma-compat.h b/include/asm-generic/pci-dma-compat.h
index 25c10e96b2b..37b3706226e 100644
--- a/include/asm-generic/pci-dma-compat.h
+++ b/include/asm-generic/pci-dma-compat.h
@@ -99,9 +99,9 @@ pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
 }
 
 static inline int
-pci_dma_mapping_error(dma_addr_t dma_addr)
+pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
 {
-	return dma_mapping_error(dma_addr);
+	return dma_mapping_error(&pdev->dev, dma_addr);
 }
 
 #endif
diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h
index 0721a5e8271..a6d50c77b6b 100644
--- a/include/asm-ia64/machvec.h
+++ b/include/asm-ia64/machvec.h
@@ -54,7 +54,7 @@ typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_
 typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int);
 typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int);
 typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int);
-typedef int ia64_mv_dma_mapping_error (dma_addr_t dma_addr);
+typedef int ia64_mv_dma_mapping_error(struct device *, dma_addr_t dma_addr);
 typedef int ia64_mv_dma_supported (struct device *, u64);
 
 typedef dma_addr_t ia64_mv_dma_map_single_attrs (struct device *, void *, size_t, int, struct dma_attrs *);
diff --git a/include/asm-m68k/dma-mapping.h b/include/asm-m68k/dma-mapping.h
index a26cdeb46a5..91f7944333d 100644
--- a/include/asm-m68k/dma-mapping.h
+++ b/include/asm-m68k/dma-mapping.h
@@ -84,7 +84,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *s
 {
 }
 
-static inline int dma_mapping_error(dma_addr_t handle)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
 {
 	return 0;
 }
diff --git a/include/asm-mips/dma-mapping.h b/include/asm-mips/dma-mapping.h
index 230b3f1b69b..c64afb40cd0 100644
--- a/include/asm-mips/dma-mapping.h
+++ b/include/asm-mips/dma-mapping.h
@@ -42,7 +42,7 @@ extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 	int nelems, enum dma_data_direction direction);
 extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 	int nelems, enum dma_data_direction direction);
-extern int dma_mapping_error(dma_addr_t dma_addr);
+extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
 extern int dma_supported(struct device *dev, u64 mask);
 
 static inline int
diff --git a/include/asm-mn10300/dma-mapping.h b/include/asm-mn10300/dma-mapping.h
index 7c882fca9ec..ccae8f6c632 100644
--- a/include/asm-mn10300/dma-mapping.h
+++ b/include/asm-mn10300/dma-mapping.h
@@ -182,7 +182,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 }
 
 static inline
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-parisc/dma-mapping.h b/include/asm-parisc/dma-mapping.h
index c6c0e9ff6bd..53af696f23d 100644
--- a/include/asm-parisc/dma-mapping.h
+++ b/include/asm-parisc/dma-mapping.h
@@ -248,6 +248,6 @@ void * sba_get_iommu(struct parisc_device *dev);
 #endif
 
 /* At the moment, we panic on error for IOMMU resource exaustion */
-#define dma_mapping_error(x)	0
+#define dma_mapping_error(dev, x)	0
 
 #endif
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
index 74c54978098..c7ca45f97dd 100644
--- a/include/asm-powerpc/dma-mapping.h
+++ b/include/asm-powerpc/dma-mapping.h
@@ -415,7 +415,7 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
 }
 
-static inline int dma_mapping_error(dma_addr_t dma_addr)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 #ifdef CONFIG_PPC64
 	return (dma_addr == DMA_ERROR_CODE);
diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h
index 22cc419389f..6c0b8a2de14 100644
--- a/include/asm-sh/dma-mapping.h
+++ b/include/asm-sh/dma-mapping.h
@@ -171,7 +171,7 @@ static inline int dma_get_cache_alignment(void)
 	return L1_CACHE_BYTES;
 }
 
-static inline int dma_mapping_error(dma_addr_t dma_addr)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return dma_addr == 0;
 }
diff --git a/include/asm-sparc/dma-mapping_64.h b/include/asm-sparc/dma-mapping_64.h
index 38cbec76a33..bfa64f9702d 100644
--- a/include/asm-sparc/dma-mapping_64.h
+++ b/include/asm-sparc/dma-mapping_64.h
@@ -135,7 +135,7 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 	/* No flushing needed to sync cpu writes to the device.  */
 }
 
-static inline int dma_mapping_error(dma_addr_t dma_addr)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return (dma_addr == DMA_ERROR_CODE);
 }
diff --git a/include/asm-sparc/pci_32.h b/include/asm-sparc/pci_32.h
index b93b6c79e08..0ee949d220c 100644
--- a/include/asm-sparc/pci_32.h
+++ b/include/asm-sparc/pci_32.h
@@ -154,7 +154,8 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 
 #define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
 
-static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
 {
         return (dma_addr == PCI_DMA_ERROR_CODE);
 }
diff --git a/include/asm-sparc/pci_64.h b/include/asm-sparc/pci_64.h
index f59f2571295..4f79a54948f 100644
--- a/include/asm-sparc/pci_64.h
+++ b/include/asm-sparc/pci_64.h
@@ -140,9 +140,10 @@ extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
 #define PCI64_REQUIRED_MASK	(~(dma64_addr_t)0)
 #define PCI64_ADDR_BASE		0xfffc000000000000UL
 
-static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
 {
-	return dma_mapping_error(dma_addr);
+	return dma_mapping_error(&pdev->dev, dma_addr);
 }
 
 #ifdef CONFIG_PCI
diff --git a/include/asm-x86/device.h b/include/asm-x86/device.h
index 87a715367a1..3c034f48fdb 100644
--- a/include/asm-x86/device.h
+++ b/include/asm-x86/device.h
@@ -5,6 +5,9 @@ struct dev_archdata {
 #ifdef CONFIG_ACPI
 	void	*acpi_handle;
 #endif
+#ifdef CONFIG_X86_64
+struct dma_mapping_ops *dma_ops;
+#endif
 #ifdef CONFIG_DMAR
 	void *iommu; /* hook for IOMMU specific extension */
 #endif
diff --git a/include/asm-x86/dma-mapping.h b/include/asm-x86/dma-mapping.h
index c2ddd3d1b88..0eaa9bf6011 100644
--- a/include/asm-x86/dma-mapping.h
+++ b/include/asm-x86/dma-mapping.h
@@ -17,7 +17,8 @@ extern int panic_on_overflow;
 extern int force_iommu;
 
 struct dma_mapping_ops {
-	int             (*mapping_error)(dma_addr_t dma_addr);
+	int             (*mapping_error)(struct device *dev,
+					 dma_addr_t dma_addr);
 	void*           (*alloc_coherent)(struct device *dev, size_t size,
 				dma_addr_t *dma_handle, gfp_t gfp);
 	void            (*free_coherent)(struct device *dev, size_t size,
@@ -56,14 +57,32 @@ struct dma_mapping_ops {
 	int		is_phys;
 };
 
-extern const struct dma_mapping_ops *dma_ops;
+extern struct dma_mapping_ops *dma_ops;
 
-static inline int dma_mapping_error(dma_addr_t dma_addr)
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
 {
-	if (dma_ops->mapping_error)
-		return dma_ops->mapping_error(dma_addr);
+#ifdef CONFIG_X86_32
+	return dma_ops;
+#else
+	if (unlikely(!dev) || !dev->archdata.dma_ops)
+		return dma_ops;
+	else
+		return dev->archdata.dma_ops;
+#endif
+}
+
+/* Make sure we keep the same behaviour */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+#ifdef CONFIG_X86_32
+	return 0;
+#else
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+	if (ops->mapping_error)
+		return ops->mapping_error(dev, dma_addr);
 
 	return (dma_addr == bad_dma_address);
+#endif
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
@@ -83,44 +102,53 @@ static inline dma_addr_t
 dma_map_single(struct device *hwdev, void *ptr, size_t size,
 	       int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	return dma_ops->map_single(hwdev, virt_to_phys(ptr), size, direction);
+	return ops->map_single(hwdev, virt_to_phys(ptr), size, direction);
 }
 
 static inline void
 dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size,
 		 int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->unmap_single)
-		dma_ops->unmap_single(dev, addr, size, direction);
+	if (ops->unmap_single)
+		ops->unmap_single(dev, addr, size, direction);
 }
 
 static inline int
 dma_map_sg(struct device *hwdev, struct scatterlist *sg,
 	   int nents, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	return dma_ops->map_sg(hwdev, sg, nents, direction);
+	return ops->map_sg(hwdev, sg, nents, direction);
 }
 
 static inline void
 dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
 	     int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->unmap_sg)
-		dma_ops->unmap_sg(hwdev, sg, nents, direction);
+	if (ops->unmap_sg)
+		ops->unmap_sg(hwdev, sg, nents, direction);
 }
 
 static inline void
 dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
 			size_t size, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_for_cpu)
-		dma_ops->sync_single_for_cpu(hwdev, dma_handle, size,
-					     direction);
+	if (ops->sync_single_for_cpu)
+		ops->sync_single_for_cpu(hwdev, dma_handle, size, direction);
 	flush_write_buffers();
 }
 
@@ -128,10 +156,11 @@ static inline void
 dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle,
 			   size_t size, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_for_device)
-		dma_ops->sync_single_for_device(hwdev, dma_handle, size,
-						direction);
+	if (ops->sync_single_for_device)
+		ops->sync_single_for_device(hwdev, dma_handle, size, direction);
 	flush_write_buffers();
 }
 
@@ -139,11 +168,12 @@ static inline void
 dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
 			      unsigned long offset, size_t size, int direction)
 {
-	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_range_for_cpu)
-		dma_ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
-						   size, direction);
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
 
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_cpu)
+		ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
+					       size, direction);
 	flush_write_buffers();
 }
 
@@ -152,11 +182,12 @@ dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle,
 				 unsigned long offset, size_t size,
 				 int direction)
 {
-	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_range_for_device)
-		dma_ops->sync_single_range_for_device(hwdev, dma_handle,
-						      offset, size, direction);
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
 
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_device)
+		ops->sync_single_range_for_device(hwdev, dma_handle,
+						  offset, size, direction);
 	flush_write_buffers();
 }
 
@@ -164,9 +195,11 @@ static inline void
 dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
 		    int nelems, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_sg_for_cpu)
-		dma_ops->sync_sg_for_cpu(hwdev, sg, nelems, direction);
+	if (ops->sync_sg_for_cpu)
+		ops->sync_sg_for_cpu(hwdev, sg, nelems, direction);
 	flush_write_buffers();
 }
 
@@ -174,9 +207,11 @@ static inline void
 dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
 		       int nelems, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_sg_for_device)
-		dma_ops->sync_sg_for_device(hwdev, sg, nelems, direction);
+	if (ops->sync_sg_for_device)
+		ops->sync_sg_for_device(hwdev, sg, nelems, direction);
 
 	flush_write_buffers();
 }
@@ -185,9 +220,11 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 				      size_t offset, size_t size,
 				      int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	return dma_ops->map_single(dev, page_to_phys(page)+offset,
-				   size, direction);
+	return ops->map_single(dev, page_to_phys(page) + offset,
+			       size, direction);
 }
 
 static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
diff --git a/include/asm-x86/swiotlb.h b/include/asm-x86/swiotlb.h
index c706a744263..2730b351afc 100644
--- a/include/asm-x86/swiotlb.h
+++ b/include/asm-x86/swiotlb.h
@@ -35,7 +35,7 @@ extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
 			  int nents, int direction);
 extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
 			     int nents, int direction);
-extern int swiotlb_dma_mapping_error(dma_addr_t dma_addr);
+extern int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
 extern void swiotlb_free_coherent(struct device *hwdev, size_t size,
 				  void *vaddr, dma_addr_t dma_handle);
 extern int swiotlb_dma_supported(struct device *hwdev, u64 mask);
diff --git a/include/asm-xtensa/dma-mapping.h b/include/asm-xtensa/dma-mapping.h
index 3c7d537dd15..51882ae3db4 100644
--- a/include/asm-xtensa/dma-mapping.h
+++ b/include/asm-xtensa/dma-mapping.h
@@ -139,7 +139,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
 		consistent_sync(sg_virt(sg), sg->length, dir);
 }
 static inline int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index 7d51cbca49a..75ae6d8aba4 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -758,7 +758,7 @@ static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
 	}
 
 	dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction);
-	if (!dma_mapping_error(dma_addr)) {
+	if (!dma_mapping_error(&c->pdev->dev, dma_addr)) {
 #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
 		if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
 			*mptr++ = cpu_to_le32(0x7C020002);
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 4bf8cade9db..e530026eedf 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -427,9 +427,9 @@ static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr)
 {
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
-		return pci_dma_mapping_error(addr);
+		return pci_dma_mapping_error(dev->bus->host_pci, addr);
 	case SSB_BUSTYPE_SSB:
-		return dma_mapping_error(addr);
+		return dma_mapping_error(dev->dev, addr);
 	default:
 		__ssb_dma_not_implemented(dev);
 	}
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 90b529f7a15..936e333e7ce 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -1590,7 +1590,7 @@ static inline int ib_dma_mapping_error(struct ib_device *dev, u64 dma_addr)
 {
 	if (dev->dma_ops)
 		return dev->dma_ops->mapping_error(dev, dma_addr);
-	return dma_mapping_error(dma_addr);
+	return dma_mapping_error(dev->dma_device, dma_addr);
 }
 
 /**
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index d568894df8c..977edbdbc1d 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -492,7 +492,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		 */
 		dma_addr_t handle;
 		handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
-		if (swiotlb_dma_mapping_error(handle))
+		if (swiotlb_dma_mapping_error(hwdev, handle))
 			return NULL;
 
 		ret = bus_to_virt(handle);
@@ -824,7 +824,7 @@ swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
 }
 
 int
-swiotlb_dma_mapping_error(dma_addr_t dma_addr)
+swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr)
 {
 	return (dma_addr == virt_to_bus(io_tlb_overflow_buffer));
 }
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index a19b22b452a..84d328329d9 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -169,7 +169,8 @@ static int send_write(struct svcxprt_rdma *xprt, struct svc_rqst *rqstp,
 					  (void *)
 					  vec->sge[xdr_sge_no].iov_base + sge_off,
 					  sge_bytes, DMA_TO_DEVICE);
-		if (dma_mapping_error(sge[sge_no].addr))
+		if (dma_mapping_error(xprt->sc_cm_id->device->dma_device,
+					sge[sge_no].addr))
 			goto err;
 		sge_off = 0;
 		sge_no++;
-- 
cgit v1.2.3


From 1956a96de488feb05e95c08c9d5e80f63a4be2b1 Mon Sep 17 00:00:00 2001
From: Alexis Bruemmer <alexisb@us.ibm.com>
Date: Fri, 25 Jul 2008 19:44:51 -0700
Subject: x86 calgary: fix handling of devices that aren't behind the Calgary

The calgary code can give drivers addresses above 4GB which is very bad
for hardware that is only 32bit DMA addressable.

With this patch, the calgary code sets the global dma_ops to swiotlb or
nommu properly, and the dma_ops of devices behind the Calgary/CalIOC2
to calgary_dma_ops.  So the calgary code can handle devices safely that
aren't behind the Calgary/CalIOC2.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexis Bruemmer <alexisb@us.ibm.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/pci-calgary_64.c | 71 +++++++++++++++-------------------------
 include/asm-x86/iommu.h          |  1 +
 2 files changed, 27 insertions(+), 45 deletions(-)

diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 1eb86be93d7..b67a4b1d4ea 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -37,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
+
 #include <asm/iommu.h>
 #include <asm/calgary.h>
 #include <asm/tce.h>
@@ -413,22 +414,6 @@ static void calgary_unmap_sg(struct device *dev,
 	}
 }
 
-static int calgary_nontranslate_map_sg(struct device* dev,
-	struct scatterlist *sg, int nelems, int direction)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nelems, i) {
-		struct page *p = sg_page(s);
-
-		BUG_ON(!p);
-		s->dma_address = virt_to_bus(sg_virt(s));
-		s->dma_length = s->length;
-	}
-	return nelems;
-}
-
 static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	int nelems, int direction)
 {
@@ -439,9 +424,6 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	unsigned long entry;
 	int i;
 
-	if (!translation_enabled(tbl))
-		return calgary_nontranslate_map_sg(dev, sg, nelems, direction);
-
 	for_each_sg(sg, s, nelems, i) {
 		BUG_ON(!sg_page(s));
 
@@ -477,7 +459,6 @@ error:
 static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	size_t size, int direction)
 {
-	dma_addr_t dma_handle = bad_dma_address;
 	void *vaddr = phys_to_virt(paddr);
 	unsigned long uaddr;
 	unsigned int npages;
@@ -486,12 +467,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	uaddr = (unsigned long)vaddr;
 	npages = num_dma_pages(uaddr, size);
 
-	if (translation_enabled(tbl))
-		dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction);
-	else
-		dma_handle = virt_to_bus(vaddr);
-
-	return dma_handle;
+	return iommu_alloc(dev, tbl, vaddr, npages, direction);
 }
 
 static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
@@ -500,9 +476,6 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
 	struct iommu_table *tbl = find_iommu_table(dev);
 	unsigned int npages;
 
-	if (!translation_enabled(tbl))
-		return;
-
 	npages = num_dma_pages(dma_handle, size);
 	iommu_free(tbl, dma_handle, npages);
 }
@@ -525,18 +498,12 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size,
 		goto error;
 	memset(ret, 0, size);
 
-	if (translation_enabled(tbl)) {
-		/* set up tces to cover the allocated range */
-		mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
-		if (mapping == bad_dma_address)
-			goto free;
-
-		*dma_handle = mapping;
-	} else /* non translated slot */
-		*dma_handle = virt_to_bus(ret);
-
+	/* set up tces to cover the allocated range */
+	mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
+	if (mapping == bad_dma_address)
+		goto free;
+	*dma_handle = mapping;
 	return ret;
-
 free:
 	free_pages((unsigned long)ret, get_order(size));
 	ret = NULL;
@@ -1241,6 +1208,16 @@ static int __init calgary_init(void)
 			goto error;
 	} while (1);
 
+	dev = NULL;
+	for_each_pci_dev(dev) {
+		struct iommu_table *tbl;
+
+		tbl = find_iommu_table(&dev->dev);
+
+		if (translation_enabled(tbl))
+			dev->dev.archdata.dma_ops = &calgary_dma_ops;
+	}
+
 	return ret;
 
 error:
@@ -1262,6 +1239,7 @@ error:
 		calgary_disable_translation(dev);
 		calgary_free_bus(dev);
 		pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */
+		dev->dev.archdata.dma_ops = NULL;
 	} while (1);
 
 	return ret;
@@ -1503,6 +1481,10 @@ void __init detect_calgary(void)
 		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
 		       "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
 		       debugging ? "enabled" : "disabled");
+
+		/* swiotlb for devices that aren't behind the Calgary. */
+		if (max_pfn > MAX_DMA32_PFN)
+			swiotlb = 1;
 	}
 	return;
 
@@ -1519,7 +1501,7 @@ int __init calgary_iommu_init(void)
 {
 	int ret;
 
-	if (no_iommu || swiotlb)
+	if (no_iommu || (swiotlb && !calgary_detected))
 		return -ENODEV;
 
 	if (!calgary_detected)
@@ -1532,15 +1514,14 @@ int __init calgary_iommu_init(void)
 	if (ret) {
 		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
 		       "falling back to no_iommu\n", ret);
-		if (max_pfn > MAX_DMA32_PFN)
-			printk(KERN_ERR "WARNING more than 4GB of memory, "
-					"32bit PCI may malfunction.\n");
 		return ret;
 	}
 
 	force_iommu = 1;
 	bad_dma_address = 0x0;
-	dma_ops = &calgary_dma_ops;
+	/* dma_ops is set to swiotlb or nommu */
+	if (!dma_ops)
+		dma_ops = &nommu_dma_ops;
 
 	return 0;
 }
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index d63166fb3ab..ecc8061904a 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -3,6 +3,7 @@
 
 extern void pci_iommu_shutdown(void);
 extern void no_iommu_init(void);
+extern struct dma_mapping_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
 
-- 
cgit v1.2.3


From 7d135a5d50a08bbc53b189d79d8bdb03136f5303 Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <matthias@kaehlcke.net>
Date: Fri, 25 Jul 2008 19:44:51 -0700
Subject: affs: convert s_bmlock into a mutex

The semaphore s_bmlock is used as a mutex.  Convert it to the mutex API.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/affs/affs.h   |  3 ++-
 fs/affs/bitmap.c | 18 +++++++++---------
 fs/affs/super.c  |  2 +-
 3 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index 223b1917093..e9ec915f755 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -2,6 +2,7 @@
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
 #include <linux/amigaffs.h>
+#include <linux/mutex.h>
 
 /* AmigaOS allows file names with up to 30 characters length.
  * Names longer than that will be silently truncated. If you
@@ -98,7 +99,7 @@ struct affs_sb_info {
 	gid_t s_gid;			/* gid to override */
 	umode_t s_mode;			/* mode to override */
 	struct buffer_head *s_root_bh;	/* Cached root block. */
-	struct semaphore s_bmlock;	/* Protects bitmap access. */
+	struct mutex s_bmlock;		/* Protects bitmap access. */
 	struct affs_bm_info *s_bitmap;	/* Bitmap infos. */
 	u32 s_bmap_count;		/* # of bitmap blocks. */
 	u32 s_bmap_bits;		/* # of bits in one bitmap blocks */
diff --git a/fs/affs/bitmap.c b/fs/affs/bitmap.c
index c4a5ad09ddf..dc5ef14bdc1 100644
--- a/fs/affs/bitmap.c
+++ b/fs/affs/bitmap.c
@@ -45,14 +45,14 @@ affs_count_free_blocks(struct super_block *sb)
 	if (sb->s_flags & MS_RDONLY)
 		return 0;
 
-	down(&AFFS_SB(sb)->s_bmlock);
+	mutex_lock(&AFFS_SB(sb)->s_bmlock);
 
 	bm = AFFS_SB(sb)->s_bitmap;
 	free = 0;
 	for (i = AFFS_SB(sb)->s_bmap_count; i > 0; bm++, i--)
 		free += bm->bm_free;
 
-	up(&AFFS_SB(sb)->s_bmlock);
+	mutex_unlock(&AFFS_SB(sb)->s_bmlock);
 
 	return free;
 }
@@ -76,7 +76,7 @@ affs_free_block(struct super_block *sb, u32 block)
 	bit     = blk % sbi->s_bmap_bits;
 	bm      = &sbi->s_bitmap[bmap];
 
-	down(&sbi->s_bmlock);
+	mutex_lock(&sbi->s_bmlock);
 
 	bh = sbi->s_bmap_bh;
 	if (sbi->s_last_bmap != bmap) {
@@ -105,19 +105,19 @@ affs_free_block(struct super_block *sb, u32 block)
 	sb->s_dirt = 1;
 	bm->bm_free++;
 
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 	return;
 
 err_free:
 	affs_warning(sb,"affs_free_block","Trying to free block %u which is already free", block);
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 	return;
 
 err_bh_read:
 	affs_error(sb,"affs_free_block","Cannot read bitmap block %u", bm->bm_key);
 	sbi->s_bmap_bh = NULL;
 	sbi->s_last_bmap = ~0;
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 	return;
 
 err_range:
@@ -168,7 +168,7 @@ affs_alloc_block(struct inode *inode, u32 goal)
 	bmap = blk / sbi->s_bmap_bits;
 	bm = &sbi->s_bitmap[bmap];
 
-	down(&sbi->s_bmlock);
+	mutex_lock(&sbi->s_bmlock);
 
 	if (bm->bm_free)
 		goto find_bmap_bit;
@@ -249,7 +249,7 @@ find_bit:
 	mark_buffer_dirty(bh);
 	sb->s_dirt = 1;
 
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 
 	pr_debug("%d\n", blk);
 	return blk;
@@ -259,7 +259,7 @@ err_bh_read:
 	sbi->s_bmap_bh = NULL;
 	sbi->s_last_bmap = ~0;
 err_full:
-	up(&sbi->s_bmlock);
+	mutex_unlock(&sbi->s_bmlock);
 	pr_debug("failed\n");
 	return 0;
 }
diff --git a/fs/affs/super.c b/fs/affs/super.c
index d214837d5e4..4e030956640 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -290,7 +290,7 @@ static int affs_fill_super(struct super_block *sb, void *data, int silent)
 	if (!sbi)
 		return -ENOMEM;
 	sb->s_fs_info = sbi;
-	init_MUTEX(&sbi->s_bmlock);
+	mutex_init(&sbi->s_bmlock);
 
 	if (!parse_options(data,&uid,&gid,&i,&reserved,&root_block,
 				&blocksize,&sbi->s_prefix,
-- 
cgit v1.2.3


From 75b25b4cabb7ce956c36442bf8225659b1864866 Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Date: Fri, 25 Jul 2008 19:44:52 -0700
Subject: bfs: assorted cleanups

This patch makes the following cleanups:

	o removing an unused variable from bfs_fill_super();
	o removing unneeded blank spaces from pointer
	  definitions.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Cc: Tigran Aivazian <tigran_aivazian@symantec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/bfs/bfs.h   | 4 ++--
 fs/bfs/inode.c | 3 +--
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/fs/bfs/bfs.h b/fs/bfs/bfs.h
index 70f5d3a8eed..d1a6cd10afc 100644
--- a/fs/bfs/bfs.h
+++ b/fs/bfs/bfs.h
@@ -16,8 +16,8 @@ struct bfs_sb_info {
 	unsigned long si_freei;
 	unsigned long si_lf_eblk;
 	unsigned long si_lasti;
-	unsigned long * si_imap;
-	struct buffer_head * si_sbh;		/* buffer header w/superblock */
+	unsigned long *si_imap;
+	struct buffer_head *si_sbh;		/* buffer header w/superblock */
 };
 
 /*
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 8db623838b5..c8b3982e11c 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -380,7 +380,7 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 		struct bfs_inode *di;
 		int block = (i - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
 		int off = (i - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
-		unsigned long sblock, eblock;
+		unsigned long eblock;
 
 		if (!off) {
 			brelse(bh);
@@ -399,7 +399,6 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 		set_bit(i, info->si_imap);
 		info->si_freeb -= BFS_FILEBLOCKS(di);
 
-		sblock =  le32_to_cpu(di->i_sblock);
 		eblock =  le32_to_cpu(di->i_eblock);
 		if (eblock > info->si_lf_eblk)
 			info->si_lf_eblk = eblock;
-- 
cgit v1.2.3


From 3f165e4cf2af042af7d2440d688299c0d2a48b1f Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Date: Fri, 25 Jul 2008 19:44:54 -0700
Subject: bfs: kill BKL

Replace the BKL-based locking scheme used in the bfs driver by a private
filesystem-wide mutex.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Cc: Tigran Aivazian <tigran_aivazian@symantec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/bfs/bfs.h   |  1 +
 fs/bfs/dir.c   | 46 ++++++++++++++++++++++++++--------------------
 fs/bfs/file.c  |  4 ++--
 fs/bfs/inode.c | 24 +++++++++++++++---------
 4 files changed, 44 insertions(+), 31 deletions(-)

diff --git a/fs/bfs/bfs.h b/fs/bfs/bfs.h
index d1a6cd10afc..7109e451abf 100644
--- a/fs/bfs/bfs.h
+++ b/fs/bfs/bfs.h
@@ -18,6 +18,7 @@ struct bfs_sb_info {
 	unsigned long si_lasti;
 	unsigned long *si_imap;
 	struct buffer_head *si_sbh;		/* buffer header w/superblock */
+	struct mutex bfs_lock;
 };
 
 /*
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 034950cb3cb..87ee5ccee34 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -32,16 +32,17 @@ static int bfs_readdir(struct file *f, void *dirent, filldir_t filldir)
 	struct inode *dir = f->f_path.dentry->d_inode;
 	struct buffer_head *bh;
 	struct bfs_dirent *de;
+	struct bfs_sb_info *info = BFS_SB(dir->i_sb);
 	unsigned int offset;
 	int block;
 
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 
 	if (f->f_pos & (BFS_DIRENT_SIZE - 1)) {
 		printf("Bad f_pos=%08lx for %s:%08lx\n",
 					(unsigned long)f->f_pos,
 					dir->i_sb->s_id, dir->i_ino);
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return -EBADF;
 	}
 
@@ -61,7 +62,7 @@ static int bfs_readdir(struct file *f, void *dirent, filldir_t filldir)
 						le16_to_cpu(de->ino),
 						DT_UNKNOWN) < 0) {
 					brelse(bh);
-					unlock_kernel();
+					mutex_unlock(&info->bfs_lock);
 					return 0;
 				}
 			}
@@ -71,7 +72,7 @@ static int bfs_readdir(struct file *f, void *dirent, filldir_t filldir)
 		brelse(bh);
 	}
 
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return 0;	
 }
 
@@ -95,10 +96,10 @@ static int bfs_create(struct inode *dir, struct dentry *dentry, int mode,
 	inode = new_inode(s);
 	if (!inode)
 		return -ENOSPC;
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	ino = find_first_zero_bit(info->si_imap, info->si_lasti);
 	if (ino > info->si_lasti) {
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		iput(inode);
 		return -ENOSPC;
 	}
@@ -125,10 +126,10 @@ static int bfs_create(struct inode *dir, struct dentry *dentry, int mode,
 	if (err) {
 		inode_dec_link_count(inode);
 		iput(inode);
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return err;
 	}
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	d_instantiate(dentry, inode);
 	return 0;
 }
@@ -139,22 +140,23 @@ static struct dentry *bfs_lookup(struct inode *dir, struct dentry *dentry,
 	struct inode *inode = NULL;
 	struct buffer_head *bh;
 	struct bfs_dirent *de;
+	struct bfs_sb_info *info = BFS_SB(dir->i_sb);
 
 	if (dentry->d_name.len > BFS_NAMELEN)
 		return ERR_PTR(-ENAMETOOLONG);
 
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	bh = bfs_find_entry(dir, dentry->d_name.name, dentry->d_name.len, &de);
 	if (bh) {
 		unsigned long ino = (unsigned long)le16_to_cpu(de->ino);
 		brelse(bh);
 		inode = bfs_iget(dir->i_sb, ino);
 		if (IS_ERR(inode)) {
-			unlock_kernel();
+			mutex_unlock(&info->bfs_lock);
 			return ERR_CAST(inode);
 		}
 	}
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	d_add(dentry, inode);
 	return NULL;
 }
@@ -163,13 +165,14 @@ static int bfs_link(struct dentry *old, struct inode *dir,
 						struct dentry *new)
 {
 	struct inode *inode = old->d_inode;
+	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
 	int err;
 
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	err = bfs_add_entry(dir, new->d_name.name, new->d_name.len,
 							inode->i_ino);
 	if (err) {
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return err;
 	}
 	inc_nlink(inode);
@@ -177,19 +180,19 @@ static int bfs_link(struct dentry *old, struct inode *dir,
 	mark_inode_dirty(inode);
 	atomic_inc(&inode->i_count);
 	d_instantiate(new, inode);
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return 0;
 }
 
 static int bfs_unlink(struct inode *dir, struct dentry *dentry)
 {
 	int error = -ENOENT;
-	struct inode *inode;
+	struct inode *inode = dentry->d_inode;
 	struct buffer_head *bh;
 	struct bfs_dirent *de;
+	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
 
-	inode = dentry->d_inode;
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	bh = bfs_find_entry(dir, dentry->d_name.name, dentry->d_name.len, &de);
 	if (!bh || (le16_to_cpu(de->ino) != inode->i_ino))
 		goto out_brelse;
@@ -210,7 +213,7 @@ static int bfs_unlink(struct inode *dir, struct dentry *dentry)
 
 out_brelse:
 	brelse(bh);
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return error;
 }
 
@@ -220,6 +223,7 @@ static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	struct inode *old_inode, *new_inode;
 	struct buffer_head *old_bh, *new_bh;
 	struct bfs_dirent *old_de, *new_de;
+	struct bfs_sb_info *info;
 	int error = -ENOENT;
 
 	old_bh = new_bh = NULL;
@@ -227,7 +231,9 @@ static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	if (S_ISDIR(old_inode->i_mode))
 		return -EINVAL;
 
-	lock_kernel();
+	info = BFS_SB(old_inode->i_sb);
+
+	mutex_lock(&info->bfs_lock);
 	old_bh = bfs_find_entry(old_dir, 
 				old_dentry->d_name.name, 
 				old_dentry->d_name.len, &old_de);
@@ -264,7 +270,7 @@ static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	error = 0;
 
 end_rename:
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	brelse(old_bh);
 	brelse(new_bh);
 	return error;
diff --git a/fs/bfs/file.c b/fs/bfs/file.c
index b11e63e8fbc..6a021265f01 100644
--- a/fs/bfs/file.c
+++ b/fs/bfs/file.c
@@ -99,7 +99,7 @@ static int bfs_get_block(struct inode *inode, sector_t block,
 		return -ENOSPC;
 
 	/* The rest has to be protected against itself. */
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 
 	/*
 	 * If the last data block for this file is the last allocated
@@ -151,7 +151,7 @@ static int bfs_get_block(struct inode *inode, sector_t block,
 	mark_buffer_dirty(sbh);
 	map_bh(bh_result, sb, phys);
 out:
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return err;
 }
 
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index c8b3982e11c..053e690ec9e 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -104,6 +104,7 @@ static int bfs_write_inode(struct inode *inode, int unused)
 	struct bfs_inode *di;
 	struct buffer_head *bh;
 	int block, off;
+	struct bfs_sb_info *info = BFS_SB(inode->i_sb);
 
         dprintf("ino=%08x\n", ino);
 
@@ -112,13 +113,13 @@ static int bfs_write_inode(struct inode *inode, int unused)
 		return -EIO;
 	}
 
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
 	bh = sb_bread(inode->i_sb, block);
 	if (!bh) {
 		printf("Unable to read inode %s:%08x\n",
 				inode->i_sb->s_id, ino);
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return -EIO;
 	}
 
@@ -145,7 +146,7 @@ static int bfs_write_inode(struct inode *inode, int unused)
 
 	mark_buffer_dirty(bh);
 	brelse(bh);
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	return 0;
 }
 
@@ -170,7 +171,7 @@ static void bfs_delete_inode(struct inode *inode)
 	
 	inode->i_size = 0;
 	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
-	lock_kernel();
+	mutex_lock(&info->bfs_lock);
 	mark_inode_dirty(inode);
 
 	block = (ino - BFS_ROOT_INO) / BFS_INODES_PER_BLOCK + 1;
@@ -178,7 +179,7 @@ static void bfs_delete_inode(struct inode *inode)
 	if (!bh) {
 		printf("Unable to read inode %s:%08lx\n",
 					inode->i_sb->s_id, ino);
-		unlock_kernel();
+		mutex_unlock(&info->bfs_lock);
 		return;
 	}
 	off = (ino - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK;
@@ -204,14 +205,16 @@ static void bfs_delete_inode(struct inode *inode)
 		info->si_lf_eblk = bi->i_sblock - 1;
 		mark_buffer_dirty(info->si_sbh);
 	}
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 	clear_inode(inode);
 }
 
 static void bfs_put_super(struct super_block *s)
 {
 	struct bfs_sb_info *info = BFS_SB(s);
+
 	brelse(info->si_sbh);
+	mutex_destroy(&info->bfs_lock);
 	kfree(info->si_imap);
 	kfree(info);
 	s->s_fs_info = NULL;
@@ -236,11 +239,13 @@ static int bfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 
 static void bfs_write_super(struct super_block *s)
 {
-	lock_kernel();
+	struct bfs_sb_info *info = BFS_SB(s);
+
+	mutex_lock(&info->bfs_lock);
 	if (!(s->s_flags & MS_RDONLY))
-		mark_buffer_dirty(BFS_SB(s)->si_sbh);
+		mark_buffer_dirty(info->si_sbh);
 	s->s_dirt = 0;
-	unlock_kernel();
+	mutex_unlock(&info->bfs_lock);
 }
 
 static struct kmem_cache *bfs_inode_cachep;
@@ -409,6 +414,7 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
 		s->s_dirt = 1;
 	} 
 	dump_imap("read_super", s);
+	mutex_init(&info->bfs_lock);
 	return 0;
 
 out:
-- 
cgit v1.2.3


From 929dfb24fbcd60e2544b2de7bfb4a68da4dfc747 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:44:54 -0700
Subject: parport/share.c: proper externs

This patch adds proper externs for parport_default_timeslice and
parport_default_spintime in include/linux/parport.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/parport/procfs.c | 3 ---
 include/linux/parport.h  | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
index d950fc34320..554e11f9e1c 100644
--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -429,9 +429,6 @@ struct parport_default_sysctl_table
 	ctl_table dev_dir[2];
 };
 
-extern unsigned long parport_default_timeslice;
-extern int parport_default_spintime;
-
 static struct parport_default_sysctl_table
 parport_default_sysctl_table = {
 	.sysctl_header	= NULL,
diff --git a/include/linux/parport.h b/include/linux/parport.h
index dcb9e01a69c..6a0d7cdb577 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -560,5 +560,8 @@ extern int parport_device_proc_unregister(struct pardevice *device);
 
 #endif /*  !CONFIG_PARPORT_NOT_PC  */
 
+extern unsigned long parport_default_timeslice;
+extern int parport_default_spintime;
+
 #endif /* __KERNEL__ */
 #endif /* _PARPORT_H_ */
-- 
cgit v1.2.3


From d99a0344aefbfe991147472d46a6ee1c1a0043de Mon Sep 17 00:00:00 2001
From: Andre Haupt <andre@bitwigglers.org>
Date: Fri, 25 Jul 2008 19:44:55 -0700
Subject: parport: remove superfluous local variable

Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/parport/ieee1284.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index 0338b091267..e97059415ab 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -199,8 +199,6 @@ int parport_wait_peripheral(struct parport *port,
 	/* 40ms of slow polling. */
 	deadline = jiffies + msecs_to_jiffies(40);
 	while (time_before (jiffies, deadline)) {
-		int ret;
-
 		if (signal_pending (current))
 			return -EINTR;
 
-- 
cgit v1.2.3


From adbd321a17ccdd26752b57e68ab0a97a4aebc299 Mon Sep 17 00:00:00 2001
From: Bernhard Walle <bwalle@suse.de>
Date: Fri, 25 Jul 2008 19:44:56 -0700
Subject: parport_pc: add base_hi BAR for oxsemi_840

Use the 2nd BAR for the oxsemi_840 chip as BAR for base_hi.  Tested with:

Parallel controller [0701]: Oxford Semiconductor Ltd VScom 011H-EP1
        1 port parallel adaptor [1415:8403] (prog-if 03 [IEEE1284])

This patch is needed to make 'TRISTATE' work with that adaptor.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/parport/parport_pc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index e0c2a4584ec..8a846adf1dc 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2867,7 +2867,7 @@ static struct parport_pc_pci {
 	 * and 840 locks up if you write 1 to bit 2! */
 	/* oxsemi_952 */		{ 1, { { 0, 1 }, } },
 	/* oxsemi_954 */		{ 1, { { 0, -1 }, } },
-	/* oxsemi_840 */		{ 1, { { 0, -1 }, } },
+	/* oxsemi_840 */		{ 1, { { 0, 1 }, } },
 	/* aks_0100 */                  { 1, { { 0, -1 }, } },
 	/* mobility_pp */		{ 1, { { 0, 1 }, } },
 	/* netmos_9705 */               { 1, { { 0, -1 }, } }, /* untested */
-- 
cgit v1.2.3


From 061991ec6edceda48d60f7a53e17b8d3416266ae Mon Sep 17 00:00:00 2001
From: LE DISEZ Erwan <eledisez@grounation.org>
Date: Fri, 25 Jul 2008 19:44:56 -0700
Subject: tpm: add support for Broadcom TPM TIS device HID

Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: Marcel Selhorst <tpm@selhorst.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tpm/tpm_tis.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index c7a977bc03e..ed1879c0dd8 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -622,6 +622,7 @@ static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
 	{"ATM1200", 0},		/* Atmel */
 	{"IFX0102", 0},		/* Infineon */
 	{"BCM0101", 0},		/* Broadcom */
+	{"BCM0102", 0},		/* Broadcom */
 	{"NSC1200", 0},		/* National */
 	{"ICO0102", 0},		/* Intel */
 	/* Add new here */
-- 
cgit v1.2.3


From 3bd60464e3224820bc413c45ea2cc371edc63e9d Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:44:58 -0700
Subject: tpm_bios.c: make 2 structs static

This patch makes two needlessly global structs static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Marcel Selhorst <tpm@selhorst.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tpm/tpm_bios.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index 60a2d2630e3..68f052b42ed 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -448,7 +448,7 @@ out_free:
 	goto out;
 }
 
-const struct file_operations tpm_ascii_bios_measurements_ops = {
+static const struct file_operations tpm_ascii_bios_measurements_ops = {
 	.open = tpm_ascii_bios_measurements_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -486,7 +486,7 @@ out_free:
 	goto out;
 }
 
-const struct file_operations tpm_binary_bios_measurements_ops = {
+static const struct file_operations tpm_binary_bios_measurements_ops = {
 	.open = tpm_binary_bios_measurements_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
-- 
cgit v1.2.3


From ec288bd37e1925f513db40871bc46115cf7fb733 Mon Sep 17 00:00:00 2001
From: Marcin Obara <marcin_obara@users.sourceforge.net>
Date: Fri, 25 Jul 2008 19:44:59 -0700
Subject: tpm: increase size of internal TPM response buffers

This patch increases size of driver internal response buffers.  Some TPM
responses defined in TCG TPM Specification Version 1.2 Revision 103 have
increased size and do not fit previously defined buffers.  Some TPM
responses do not have fixed size, so bigger response buffers have to be
allocated.  200B buffers should be enough.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Marcin Obara <marcin_obara@users.sourceforge.net>
Cc: Marcel Selhorst <tpm@selhorst.net>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tpm/tpm.c | 124 ++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 93 insertions(+), 31 deletions(-)

diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index e1fc193d939..f354d720b77 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -580,91 +580,133 @@ void tpm_continue_selftest(struct tpm_chip *chip)
 }
 EXPORT_SYMBOL_GPL(tpm_continue_selftest);
 
+#define  TPM_INTERNAL_RESULT_SIZE 200
+
 ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr,
 			char *buf)
 {
-	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)];
+	u8 *data;
 	ssize_t rc;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
-			"attemtping to determine the permanent state");
-	if (rc)
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
+			"attemtping to determine the permanent enabled state");
+	if (rc) {
+		kfree(data);
 		return 0;
-	return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_DISABLE_IDX]);
+	}
+
+	rc = sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_DISABLE_IDX]);
+
+	kfree(data);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_enabled);
 
 ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr,
 			char *buf)
 {
-	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)];
+	u8 *data;
 	ssize_t rc;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
-			"attemtping to determine the permanent state");
-	if (rc)
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
+			"attemtping to determine the permanent active state");
+	if (rc) {
+		kfree(data);
 		return 0;
-	return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_INACTIVE_IDX]);
+	}
+
+	rc = sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_INACTIVE_IDX]);
+
+	kfree(data);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_active);
 
 ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr,
 			char *buf)
 {
-	u8 data[sizeof(tpm_cap)];
+	u8 *data;
 	ssize_t rc;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_PROP;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_OWNER;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the owner state");
-	if (rc)
+	if (rc) {
+		kfree(data);
 		return 0;
-	return sprintf(buf, "%d\n", data[TPM_GET_CAP_RET_BOOL_1_IDX]);
+	}
+
+	rc = sprintf(buf, "%d\n", data[TPM_GET_CAP_RET_BOOL_1_IDX]);
+
+	kfree(data);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_owned);
 
 ssize_t tpm_show_temp_deactivated(struct device * dev,
 				struct device_attribute * attr, char *buf)
 {
-	u8 data[sizeof(tpm_cap)];
+	u8 *data;
 	ssize_t rc;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_VOL;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the temporary state");
-	if (rc)
+	if (rc) {
+		kfree(data);
 		return 0;
-	return sprintf(buf, "%d\n", data[TPM_GET_CAP_TEMP_INACTIVE_IDX]);
+	}
+
+	rc = sprintf(buf, "%d\n", data[TPM_GET_CAP_TEMP_INACTIVE_IDX]);
+
+	kfree(data);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_temp_deactivated);
 
@@ -678,7 +720,7 @@ static const u8 pcrread[] = {
 ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 		      char *buf)
 {
-	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(pcrread)), 30)];
+	u8 *data;
 	ssize_t rc;
 	int i, j, num_pcrs;
 	__be32 index;
@@ -688,21 +730,27 @@ ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_PROP;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_PCR;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the number of PCRS");
-	if (rc)
+	if (rc) {
+		kfree(data);
 		return 0;
+	}
 
 	num_pcrs = be32_to_cpu(*((__be32 *) (data + 14)));
 	for (i = 0; i < num_pcrs; i++) {
 		memcpy(data, pcrread, sizeof(pcrread));
 		index = cpu_to_be32(i);
 		memcpy(data + 10, &index, 4);
-		rc = transmit_cmd(chip, data, sizeof(data),
+		rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 				"attempting to read a PCR");
 		if (rc)
 			goto out;
@@ -712,6 +760,7 @@ ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 		str += sprintf(str, "\n");
 	}
 out:
+	kfree(data);
 	return str - buf;
 }
 EXPORT_SYMBOL_GPL(tpm_show_pcrs);
@@ -795,7 +844,7 @@ static const u8 cap_version[] = {
 ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr,
 		      char *buf)
 {
-	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)];
+	u8 *data;
 	ssize_t rc;
 	char *str = buf;
 
@@ -803,21 +852,27 @@ ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr,
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_PROP;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER;
 
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the manufacturer");
-	if (rc)
+	if (rc) {
+		kfree(data);
 		return 0;
+	}
 
 	str += sprintf(str, "Manufacturer: 0x%x\n",
 		       be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))));
 
 	memcpy(data, cap_version, sizeof(cap_version));
 	data[CAP_VERSION_IDX] = CAP_VERSION_1_1;
-	rc = transmit_cmd(chip, data, sizeof(data),
+	rc = transmit_cmd(chip, data, TPM_INTERNAL_RESULT_SIZE,
 			"attempting to determine the 1.1 version");
 	if (rc)
 		goto out;
@@ -828,6 +883,7 @@ ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr,
 		       (int) data[17]);
 
 out:
+	kfree(data);
 	return str - buf;
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps);
@@ -835,7 +891,7 @@ EXPORT_SYMBOL_GPL(tpm_show_caps);
 ssize_t tpm_show_caps_1_2(struct device * dev,
 			  struct device_attribute * attr, char *buf)
 {
-	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)];
+	u8 *data;
 	ssize_t len;
 	char *str = buf;
 
@@ -843,15 +899,20 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 	if (chip == NULL)
 		return -ENODEV;
 
+	data = kzalloc(TPM_INTERNAL_RESULT_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	memcpy(data, tpm_cap, sizeof(tpm_cap));
 	data[TPM_CAP_IDX] = TPM_CAP_PROP;
 	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER;
 
-	if ((len = tpm_transmit(chip, data, sizeof(data))) <=
-	    TPM_ERROR_SIZE) {
+	len = tpm_transmit(chip, data, TPM_INTERNAL_RESULT_SIZE);
+	if (len <= TPM_ERROR_SIZE) {
 		dev_dbg(chip->dev, "A TPM error (%d) occurred "
 			"attempting to determine the manufacturer\n",
 			be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))));
+		kfree(data);
 		return 0;
 	}
 
@@ -861,8 +922,8 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 	memcpy(data, cap_version, sizeof(cap_version));
 	data[CAP_VERSION_IDX] = CAP_VERSION_1_2;
 
-	if ((len = tpm_transmit(chip, data, sizeof(data))) <=
-	    TPM_ERROR_SIZE) {
+	len = tpm_transmit(chip, data, TPM_INTERNAL_RESULT_SIZE);
+	if (len <= TPM_ERROR_SIZE) {
 		dev_err(chip->dev, "A TPM error (%d) occurred "
 			"attempting to determine the 1.2 version\n",
 			be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))));
@@ -874,6 +935,7 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
 		       (int) data[19]);
 
 out:
+	kfree(data);
 	return str - buf;
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
-- 
cgit v1.2.3


From 0147600172b4a5d261165d1aa5ef818d84da1557 Mon Sep 17 00:00:00 2001
From: Michael Halcrow <mhalcrow@us.ibm.com>
Date: Fri, 25 Jul 2008 19:45:00 -0700
Subject: tpm: Use correct data types for sizes in tpm_write() and tpm_read()

Use the correct data types for the size parameters in tpm_write() and
tpm_read(). Note that rw_verify_area() makes sure that this bug cannot
be exploited to produce a buffer overrun.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Marcel Selhorst <tpm@selhorst.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tpm/tpm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index f354d720b77..ae766d86845 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -1028,7 +1028,7 @@ ssize_t tpm_write(struct file *file, const char __user *buf,
 		  size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
-	int in_size = size, out_size;
+	size_t in_size = size, out_size;
 
 	/* cannot perform a write until the read has cleared
 	   either via tpm_read or a user_read_timer timeout */
@@ -1063,7 +1063,7 @@ ssize_t tpm_read(struct file *file, char __user *buf,
 		 size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
-	int ret_size;
+	ssize_t ret_size;
 
 	del_singleshot_timer_sync(&chip->user_read_timer);
 	flush_scheduled_work();
-- 
cgit v1.2.3


From b77899985bdfd85a8e5a6e485033a9b4713d2471 Mon Sep 17 00:00:00 2001
From: Alex Dubov <oakad@yahoo.com>
Date: Fri, 25 Jul 2008 19:45:00 -0700
Subject: memstick: allow "set_param" method to return an error code

Some controllers (Jmicron, for instance) can report temporal failure
condition during power-on.  It is desirable to account for this using a
return value of "set_param" device method.  The return value can also be
handy to distinguish between supported and unsupported device parameters
in run time.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/memstick/core/memstick.c  | 18 ++++++++---
 drivers/memstick/host/jmb38x_ms.c | 67 ++++++++++++++++++++++++++++-----------
 drivers/memstick/host/tifm_ms.c   | 17 +++++-----
 include/linux/memstick.h          |  2 +-
 4 files changed, 71 insertions(+), 33 deletions(-)

diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index 61b98c333cb..3c7d9a79c1e 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -415,10 +415,14 @@ err_out:
 	return NULL;
 }
 
-static void memstick_power_on(struct memstick_host *host)
+static int memstick_power_on(struct memstick_host *host)
 {
-	host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
-	host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
+	int rc = host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
+
+	if (!rc)
+		rc = host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
+
+	return rc;
 }
 
 static void memstick_check(struct work_struct *work)
@@ -573,11 +577,15 @@ EXPORT_SYMBOL(memstick_suspend_host);
  */
 void memstick_resume_host(struct memstick_host *host)
 {
+	int rc = 0;
+
 	mutex_lock(&host->lock);
 	if (host->card)
-		memstick_power_on(host);
+		rc = memstick_power_on(host);
 	mutex_unlock(&host->lock);
-	memstick_detect_change(host);
+
+	if (!rc)
+		memstick_detect_change(host);
 }
 EXPORT_SYMBOL(memstick_resume_host);
 
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index 4e3bfbcdf15..9d82e67737d 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -609,36 +609,68 @@ static void jmb38x_ms_request(struct memstick_host *msh)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static void jmb38x_ms_reset(struct jmb38x_ms_host *host)
+static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
 {
-	unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
+	int cnt;
 
-	writel(HOST_CONTROL_RESET_REQ, host->addr + HOST_CONTROL);
+	writel(HOST_CONTROL_RESET_REQ | HOST_CONTROL_CLOCK_EN
+	       | readl(host->addr + HOST_CONTROL),
+	       host->addr + HOST_CONTROL);
+	mmiowb();
+
+	for (cnt = 0; cnt < 20; ++cnt) {
+		if (!(HOST_CONTROL_RESET_REQ
+		      & readl(host->addr + HOST_CONTROL)))
+			goto reset_next;
 
-	while (HOST_CONTROL_RESET_REQ
-	       & (host_ctl = readl(host->addr + HOST_CONTROL))) {
 		ndelay(20);
-		dev_dbg(&host->chip->pdev->dev, "reset %08x\n", host_ctl);
 	}
+	dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
+	return -EIO;
 
-	writel(HOST_CONTROL_RESET, host->addr + HOST_CONTROL);
+reset_next:
+	writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
+	       | readl(host->addr + HOST_CONTROL),
+	       host->addr + HOST_CONTROL);
+	mmiowb();
+
+	for (cnt = 0; cnt < 20; ++cnt) {
+		if (!(HOST_CONTROL_RESET
+		      & readl(host->addr + HOST_CONTROL)))
+			goto reset_ok;
+
+		ndelay(20);
+	}
+	dev_dbg(&host->chip->pdev->dev, "reset timeout\n");
+	return -EIO;
+
+reset_ok:
 	mmiowb();
 	writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE);
 	writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE);
+	return 0;
 }
 
-static void jmb38x_ms_set_param(struct memstick_host *msh,
-				enum memstick_param param,
-				int value)
+static int jmb38x_ms_set_param(struct memstick_host *msh,
+			       enum memstick_param param,
+			       int value)
 {
 	struct jmb38x_ms_host *host = memstick_priv(msh);
 	unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
 	unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0;
+	int rc = 0;
 
 	switch (param) {
 	case MEMSTICK_POWER:
 		if (value == MEMSTICK_POWER_ON) {
-			jmb38x_ms_reset(host);
+			rc = jmb38x_ms_reset(host);
+			if (rc)
+				return rc;
+
+			host_ctl = 7;
+			host_ctl |= HOST_CONTROL_POWER_EN
+				 | HOST_CONTROL_CLOCK_EN;
+			writel(host_ctl, host->addr + HOST_CONTROL);
 
 			writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
 					: PAD_PU_PD_ON_MS_SOCK0,
@@ -647,11 +679,7 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
 			writel(PAD_OUTPUT_ENABLE_MS,
 			       host->addr + PAD_OUTPUT_ENABLE);
 
-			host_ctl = 7;
-			host_ctl |= HOST_CONTROL_POWER_EN
-				 | HOST_CONTROL_CLOCK_EN;
-			writel(host_ctl, host->addr + HOST_CONTROL);
-
+			msleep(10);
 			dev_dbg(&host->chip->pdev->dev, "power on\n");
 		} else if (value == MEMSTICK_POWER_OFF) {
 			host_ctl &= ~(HOST_CONTROL_POWER_EN
@@ -660,7 +688,8 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
 			writel(0, host->addr + PAD_OUTPUT_ENABLE);
 			writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD);
 			dev_dbg(&host->chip->pdev->dev, "power off\n");
-		}
+		} else
+			return -EINVAL;
 		break;
 	case MEMSTICK_INTERFACE:
 		host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
@@ -686,12 +715,14 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
 			host_ctl &= ~HOST_CONTROL_REI;
 			clock_ctl = CLOCK_CONTROL_60MHZ;
 			clock_delay = 0;
-		}
+		} else
+			return -EINVAL;
 		writel(host_ctl, host->addr + HOST_CONTROL);
 		writel(clock_ctl, host->addr + CLOCK_CONTROL);
 		writel(clock_delay, host->addr + CLOCK_DELAY);
 		break;
 	};
+	return 0;
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c
index 8577de4ebb0..14458764588 100644
--- a/drivers/memstick/host/tifm_ms.c
+++ b/drivers/memstick/host/tifm_ms.c
@@ -489,15 +489,12 @@ static void tifm_ms_request(struct memstick_host *msh)
 	return;
 }
 
-static void tifm_ms_set_param(struct memstick_host *msh,
-			      enum memstick_param param,
-			      int value)
+static int tifm_ms_set_param(struct memstick_host *msh,
+			     enum memstick_param param,
+			     int value)
 {
 	struct tifm_ms *host = memstick_priv(msh);
 	struct tifm_dev *sock = host->dev;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sock->lock, flags);
 
 	switch (param) {
 	case MEMSTICK_POWER:
@@ -512,7 +509,8 @@ static void tifm_ms_set_param(struct memstick_host *msh,
 			writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR,
 			       sock->addr + SOCK_MS_SYSTEM);
 			writel(0xffffffff, sock->addr + SOCK_MS_STATUS);
-		}
+		} else
+			return -EINVAL;
 		break;
 	case MEMSTICK_INTERFACE:
 		if (value == MEMSTICK_SERIAL) {
@@ -525,11 +523,12 @@ static void tifm_ms_set_param(struct memstick_host *msh,
 			writel(TIFM_CTRL_FAST_CLK
 			       | readl(sock->addr + SOCK_CONTROL),
 			       sock->addr + SOCK_CONTROL);
-		}
+		} else
+			return -EINVAL;
 		break;
 	};
 
-	spin_unlock_irqrestore(&sock->lock, flags);
+	return 0;
 }
 
 static void tifm_ms_abort(unsigned long data)
diff --git a/include/linux/memstick.h b/include/linux/memstick.h
index 37a5cdb0391..2fe599c66d5 100644
--- a/include/linux/memstick.h
+++ b/include/linux/memstick.h
@@ -284,7 +284,7 @@ struct memstick_host {
 	/* Notify the host that some requests are pending. */
 	void                (*request)(struct memstick_host *host);
 	/* Set host IO parameters (power, clock, etc).     */
-	void                (*set_param)(struct memstick_host *host,
+	int                 (*set_param)(struct memstick_host *host,
 					 enum memstick_param param,
 					 int value);
 	unsigned long       private[0] ____cacheline_aligned;
-- 
cgit v1.2.3


From 17017d8d2c005734d7088d8281ce2daab8fcb097 Mon Sep 17 00:00:00 2001
From: Alex Dubov <oakad@yahoo.com>
Date: Fri, 25 Jul 2008 19:45:01 -0700
Subject: memstick: add "start" and "stop" methods to memstick device

In some cases it may be desirable to ensure that associated driver is not
going to access the media in some period of time.  "start" and "stop"
methods are provided therefore to allow it.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/memstick/core/memstick.c    | 11 ++++++++---
 drivers/memstick/core/mspro_block.c | 33 +++++++++++++++++++++++++++++++++
 include/linux/memstick.h            |  4 ++++
 3 files changed, 45 insertions(+), 3 deletions(-)

diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index 3c7d9a79c1e..7162f772bbf 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -433,8 +433,11 @@ static void memstick_check(struct work_struct *work)
 
 	dev_dbg(&host->dev, "memstick_check started\n");
 	mutex_lock(&host->lock);
-	if (!host->card)
-		memstick_power_on(host);
+	if (!host->card) {
+		if (memstick_power_on(host))
+			goto out_power_off;
+	} else
+		host->card->stop(host->card);
 
 	card = memstick_alloc_card(host);
 
@@ -452,7 +455,8 @@ static void memstick_check(struct work_struct *work)
 			    || !(host->card->check(host->card))) {
 				device_unregister(&host->card->dev);
 				host->card = NULL;
-			}
+			} else
+				host->card->start(host->card);
 		}
 
 		if (!host->card) {
@@ -465,6 +469,7 @@ static void memstick_check(struct work_struct *work)
 			kfree(card);
 	}
 
+out_power_off:
 	if (!host->card)
 		host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF);
 
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 477d0fb6e58..004ac4d176d 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -752,6 +752,37 @@ static int mspro_block_has_request(struct mspro_block_data *msb)
 	return rc;
 }
 
+static void mspro_block_stop(struct memstick_dev *card)
+{
+	struct mspro_block_data *msb = memstick_get_drvdata(card);
+	int rc = 0;
+	unsigned long flags;
+
+	while (1) {
+		spin_lock_irqsave(&msb->q_lock, flags);
+		if (!msb->has_request) {
+			blk_stop_queue(msb->queue);
+			rc = 1;
+		}
+		spin_unlock_irqrestore(&msb->q_lock, flags);
+
+		if (rc)
+			break;
+
+		wait_for_completion(&card->mrq_complete);
+	}
+}
+
+static void mspro_block_start(struct memstick_dev *card)
+{
+	struct mspro_block_data *msb = memstick_get_drvdata(card);
+	unsigned long flags;
+
+	spin_lock_irqsave(&msb->q_lock, flags);
+	blk_start_queue(msb->queue);
+	spin_unlock_irqrestore(&msb->q_lock, flags);
+}
+
 static int mspro_block_queue_thread(void *data)
 {
 	struct memstick_dev *card = data;
@@ -1272,6 +1303,8 @@ static int mspro_block_probe(struct memstick_dev *card)
 	rc = mspro_block_init_disk(card);
 	if (!rc) {
 		card->check = mspro_block_check_card;
+		card->stop = mspro_block_stop;
+		card->start = mspro_block_start;
 		return 0;
 	}
 
diff --git a/include/linux/memstick.h b/include/linux/memstick.h
index 2fe599c66d5..a9f998a3f48 100644
--- a/include/linux/memstick.h
+++ b/include/linux/memstick.h
@@ -263,6 +263,10 @@ struct memstick_dev {
 	/* Get next request from the media driver.                         */
 	int                      (*next_request)(struct memstick_dev *card,
 						 struct memstick_request **mrq);
+	/* Tell the media driver to stop doing things                      */
+	void                     (*stop)(struct memstick_dev *card);
+	/* Allow the media driver to continue                              */
+	void                     (*start)(struct memstick_dev *card);
 
 	struct device            dev;
 };
-- 
cgit v1.2.3


From f1d82698029b92a88f5500b99f66514b6dee2bc3 Mon Sep 17 00:00:00 2001
From: Alex Dubov <oakad@yahoo.com>
Date: Fri, 25 Jul 2008 19:45:02 -0700
Subject: memstick: use fully asynchronous request processing

Instead of using a separate thread to pump requests from block layer queue
to memstick, do so inline, utilizing the callback design of the memstick.

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/memstick/core/memstick.c    |   7 +-
 drivers/memstick/core/mspro_block.c | 344 +++++++++++++++++-------------------
 drivers/memstick/host/jmb38x_ms.c   |  35 ++--
 drivers/memstick/host/tifm_ms.c     |  49 ++---
 4 files changed, 218 insertions(+), 217 deletions(-)

diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index 7162f772bbf..a38005008a2 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -249,8 +249,11 @@ EXPORT_SYMBOL(memstick_next_req);
  */
 void memstick_new_req(struct memstick_host *host)
 {
-	host->retries = cmd_retries;
-	host->request(host);
+	if (host->card) {
+		host->retries = cmd_retries;
+		INIT_COMPLETION(host->card->mrq_complete);
+		host->request(host);
+	}
 }
 EXPORT_SYMBOL(memstick_new_req);
 
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 004ac4d176d..44b1817f2f2 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -136,9 +136,8 @@ struct mspro_block_data {
 	unsigned int          caps;
 	struct gendisk        *disk;
 	struct request_queue  *queue;
+	struct request        *block_req;
 	spinlock_t            q_lock;
-	wait_queue_head_t     q_wait;
-	struct task_struct    *q_thread;
 
 	unsigned short        page_size;
 	unsigned short        cylinders;
@@ -147,9 +146,10 @@ struct mspro_block_data {
 
 	unsigned char         system;
 	unsigned char         read_only:1,
-			      active:1,
+			      eject:1,
 			      has_request:1,
-			      data_dir:1;
+			      data_dir:1,
+			      active:1;
 	unsigned char         transfer_cmd;
 
 	int                   (*mrq_handler)(struct memstick_dev *card,
@@ -160,12 +160,14 @@ struct mspro_block_data {
 	struct scatterlist    req_sg[MSPRO_BLOCK_MAX_SEGS];
 	unsigned int          seg_count;
 	unsigned int          current_seg;
-	unsigned short        current_page;
+	unsigned int          current_page;
 };
 
 static DEFINE_IDR(mspro_block_disk_idr);
 static DEFINE_MUTEX(mspro_block_disk_lock);
 
+static int mspro_block_complete_req(struct memstick_dev *card, int error);
+
 /*** Block device ***/
 
 static int mspro_block_bd_open(struct inode *inode, struct file *filp)
@@ -197,8 +199,10 @@ static int mspro_block_disk_release(struct gendisk *disk)
 
 	mutex_lock(&mspro_block_disk_lock);
 
-	if (msb->usage_count) {
-		msb->usage_count--;
+	if (msb) {
+		if (msb->usage_count)
+			msb->usage_count--;
+
 		if (!msb->usage_count) {
 			kfree(msb);
 			disk->private_data = NULL;
@@ -523,11 +527,13 @@ static int h_mspro_block_req_init(struct memstick_dev *card,
 static int h_mspro_block_default(struct memstick_dev *card,
 				 struct memstick_request **mrq)
 {
-	complete(&card->mrq_complete);
-	if (!(*mrq)->error)
-		return -EAGAIN;
-	else
-		return (*mrq)->error;
+	return mspro_block_complete_req(card, (*mrq)->error);
+}
+
+static int h_mspro_block_default_bad(struct memstick_dev *card,
+				     struct memstick_request **mrq)
+{
+	return -ENXIO;
 }
 
 static int h_mspro_block_get_ro(struct memstick_dev *card,
@@ -535,44 +541,30 @@ static int h_mspro_block_get_ro(struct memstick_dev *card,
 {
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
 
-	if ((*mrq)->error) {
-		complete(&card->mrq_complete);
-		return (*mrq)->error;
+	if (!(*mrq)->error) {
+		if ((*mrq)->data[offsetof(struct ms_status_register, status0)]
+		    & MEMSTICK_STATUS0_WP)
+			msb->read_only = 1;
+		else
+			msb->read_only = 0;
 	}
 
-	if ((*mrq)->data[offsetof(struct ms_status_register, status0)]
-	    & MEMSTICK_STATUS0_WP)
-		msb->read_only = 1;
-	else
-		msb->read_only = 0;
-
-	complete(&card->mrq_complete);
-	return -EAGAIN;
+	return mspro_block_complete_req(card, (*mrq)->error);
 }
 
 static int h_mspro_block_wait_for_ced(struct memstick_dev *card,
 				      struct memstick_request **mrq)
 {
-	if ((*mrq)->error) {
-		complete(&card->mrq_complete);
-		return (*mrq)->error;
-	}
-
 	dev_dbg(&card->dev, "wait for ced: value %x\n", (*mrq)->data[0]);
 
-	if ((*mrq)->data[0] & (MEMSTICK_INT_CMDNAK | MEMSTICK_INT_ERR)) {
-		card->current_mrq.error = -EFAULT;
-		complete(&card->mrq_complete);
-		return card->current_mrq.error;
+	if (!(*mrq)->error) {
+		if ((*mrq)->data[0] & (MEMSTICK_INT_CMDNAK | MEMSTICK_INT_ERR))
+			(*mrq)->error = -EFAULT;
+		else if (!((*mrq)->data[0] & MEMSTICK_INT_CED))
+			return 0;
 	}
 
-	if (!((*mrq)->data[0] & MEMSTICK_INT_CED))
-		return 0;
-	else {
-		card->current_mrq.error = 0;
-		complete(&card->mrq_complete);
-		return -EAGAIN;
-	}
+	return mspro_block_complete_req(card, (*mrq)->error);
 }
 
 static int h_mspro_block_transfer_data(struct memstick_dev *card,
@@ -583,10 +575,8 @@ static int h_mspro_block_transfer_data(struct memstick_dev *card,
 	struct scatterlist t_sg = { 0 };
 	size_t t_offset;
 
-	if ((*mrq)->error) {
-		complete(&card->mrq_complete);
-		return (*mrq)->error;
-	}
+	if ((*mrq)->error)
+		return mspro_block_complete_req(card, (*mrq)->error);
 
 	switch ((*mrq)->tpc) {
 	case MS_TPC_WRITE_REG:
@@ -617,8 +607,8 @@ has_int_reg:
 
 			if (msb->current_seg == msb->seg_count) {
 				if (t_val & MEMSTICK_INT_CED) {
-					complete(&card->mrq_complete);
-					return -EAGAIN;
+					return mspro_block_complete_req(card,
+									0);
 				} else {
 					card->next_request
 						= h_mspro_block_wait_for_ced;
@@ -666,90 +656,120 @@ has_int_reg:
 
 /*** Data transfer ***/
 
-static void mspro_block_process_request(struct memstick_dev *card,
-					struct request *req)
+static int mspro_block_issue_req(struct memstick_dev *card, int chunk)
 {
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
-	struct mspro_param_register param;
-	int rc, chunk, cnt;
-	unsigned short page_count;
 	sector_t t_sec;
-	unsigned long flags;
+	unsigned int count;
+	struct mspro_param_register param;
 
-	do {
-		page_count = 0;
+try_again:
+	while (chunk) {
+		msb->current_page = 0;
 		msb->current_seg = 0;
-		msb->seg_count = blk_rq_map_sg(req->q, req, msb->req_sg);
+		msb->seg_count = blk_rq_map_sg(msb->block_req->q,
+					       msb->block_req,
+					       msb->req_sg);
 
-		if (msb->seg_count) {
-			msb->current_page = 0;
-			for (rc = 0; rc < msb->seg_count; rc++)
-				page_count += msb->req_sg[rc].length
-					      / msb->page_size;
-
-			t_sec = req->sector;
-			sector_div(t_sec, msb->page_size >> 9);
-			param.system = msb->system;
-			param.data_count = cpu_to_be16(page_count);
-			param.data_address = cpu_to_be32((uint32_t)t_sec);
-			param.tpc_param = 0;
-
-			msb->data_dir = rq_data_dir(req);
-			msb->transfer_cmd = msb->data_dir == READ
-					    ? MSPRO_CMD_READ_DATA
-					    : MSPRO_CMD_WRITE_DATA;
-
-			dev_dbg(&card->dev, "data transfer: cmd %x, "
-				"lba %x, count %x\n", msb->transfer_cmd,
-				be32_to_cpu(param.data_address),
-				page_count);
-
-			card->next_request = h_mspro_block_req_init;
-			msb->mrq_handler = h_mspro_block_transfer_data;
-			memstick_init_req(&card->current_mrq, MS_TPC_WRITE_REG,
-					  &param, sizeof(param));
-			memstick_new_req(card->host);
-			wait_for_completion(&card->mrq_complete);
-			rc = card->current_mrq.error;
+		if (!msb->seg_count) {
+			chunk = __blk_end_request(msb->block_req, -ENOMEM,
+					blk_rq_cur_bytes(msb->block_req));
+			continue;
+		}
 
-			if (rc || (card->current_mrq.tpc == MSPRO_CMD_STOP)) {
-				for (cnt = 0; cnt < msb->current_seg; cnt++)
-					page_count += msb->req_sg[cnt].length
-						      / msb->page_size;
-
-				if (msb->current_page)
-					page_count += msb->current_page - 1;
-
-				if (page_count && (msb->data_dir == READ))
-					rc = msb->page_size * page_count;
-				else
-					rc = -EIO;
-			} else
-				rc = msb->page_size * page_count;
-		} else
-			rc = -EFAULT;
+		t_sec = msb->block_req->sector << 9;
+		sector_div(t_sec, msb->page_size);
 
-		spin_lock_irqsave(&msb->q_lock, flags);
-		if (rc >= 0)
-			chunk = __blk_end_request(req, 0, rc);
-		else
-			chunk = __blk_end_request(req, rc, 0);
+		count = msb->block_req->nr_sectors << 9;
+		count /= msb->page_size;
 
-		dev_dbg(&card->dev, "end chunk %d, %d\n", rc, chunk);
-		spin_unlock_irqrestore(&msb->q_lock, flags);
-	} while (chunk);
+		param.system = msb->system;
+		param.data_count = cpu_to_be16(count);
+		param.data_address = cpu_to_be32((uint32_t)t_sec);
+		param.tpc_param = 0;
+
+		msb->data_dir = rq_data_dir(msb->block_req);
+		msb->transfer_cmd = msb->data_dir == READ
+				    ? MSPRO_CMD_READ_DATA
+				    : MSPRO_CMD_WRITE_DATA;
+
+		dev_dbg(&card->dev, "data transfer: cmd %x, "
+			"lba %x, count %x\n", msb->transfer_cmd,
+			be32_to_cpu(param.data_address), count);
+
+		card->next_request = h_mspro_block_req_init;
+		msb->mrq_handler = h_mspro_block_transfer_data;
+		memstick_init_req(&card->current_mrq, MS_TPC_WRITE_REG,
+				  &param, sizeof(param));
+		memstick_new_req(card->host);
+		return 0;
+	}
+
+	dev_dbg(&card->dev, "elv_next\n");
+	msb->block_req = elv_next_request(msb->queue);
+	if (!msb->block_req) {
+		dev_dbg(&card->dev, "issue end\n");
+		return -EAGAIN;
+	}
+
+	dev_dbg(&card->dev, "trying again\n");
+	chunk = 1;
+	goto try_again;
 }
 
-static int mspro_block_has_request(struct mspro_block_data *msb)
+static int mspro_block_complete_req(struct memstick_dev *card, int error)
 {
-	int rc = 0;
+	struct mspro_block_data *msb = memstick_get_drvdata(card);
+	int chunk, cnt;
+	unsigned int t_len = 0;
 	unsigned long flags;
 
 	spin_lock_irqsave(&msb->q_lock, flags);
-	if (kthread_should_stop() || msb->has_request)
-		rc = 1;
+	dev_dbg(&card->dev, "complete %d, %d\n", msb->has_request ? 1 : 0,
+		error);
+
+	if (msb->has_request) {
+		/* Nothing to do - not really an error */
+		if (error == -EAGAIN)
+			error = 0;
+
+		if (error || (card->current_mrq.tpc == MSPRO_CMD_STOP)) {
+			if (msb->data_dir == READ) {
+				for (cnt = 0; cnt < msb->current_seg; cnt++)
+					t_len += msb->req_sg[cnt].length
+						 / msb->page_size;
+
+					if (msb->current_page)
+						t_len += msb->current_page - 1;
+
+					t_len *= msb->page_size;
+			}
+		} else
+			t_len = msb->block_req->nr_sectors << 9;
+
+		dev_dbg(&card->dev, "transferred %x (%d)\n", t_len, error);
+
+		if (error && !t_len)
+			t_len = blk_rq_cur_bytes(msb->block_req);
+
+		chunk = __blk_end_request(msb->block_req, error, t_len);
+
+		error = mspro_block_issue_req(card, chunk);
+
+		if (!error)
+			goto out;
+		else
+			msb->has_request = 0;
+	} else {
+		if (!error)
+			error = -EAGAIN;
+	}
+
+	card->next_request = h_mspro_block_default_bad;
+	complete_all(&card->mrq_complete);
+out:
 	spin_unlock_irqrestore(&msb->q_lock, flags);
-	return rc;
+	return error;
 }
 
 static void mspro_block_stop(struct memstick_dev *card)
@@ -783,54 +803,37 @@ static void mspro_block_start(struct memstick_dev *card)
 	spin_unlock_irqrestore(&msb->q_lock, flags);
 }
 
-static int mspro_block_queue_thread(void *data)
+static int mspro_block_prepare_req(struct request_queue *q, struct request *req)
 {
-	struct memstick_dev *card = data;
-	struct memstick_host *host = card->host;
-	struct mspro_block_data *msb = memstick_get_drvdata(card);
-	struct request *req;
-	unsigned long flags;
-
-	while (1) {
-		wait_event(msb->q_wait, mspro_block_has_request(msb));
-		dev_dbg(&card->dev, "thread iter\n");
+	if (!blk_fs_request(req) && !blk_pc_request(req)) {
+		blk_dump_rq_flags(req, "MSPro unsupported request");
+		return BLKPREP_KILL;
+	}
 
-		spin_lock_irqsave(&msb->q_lock, flags);
-		req = elv_next_request(msb->queue);
-		dev_dbg(&card->dev, "next req %p\n", req);
-		if (!req) {
-			msb->has_request = 0;
-			if (kthread_should_stop()) {
-				spin_unlock_irqrestore(&msb->q_lock, flags);
-				break;
-			}
-		} else
-			msb->has_request = 1;
-		spin_unlock_irqrestore(&msb->q_lock, flags);
+	req->cmd_flags |= REQ_DONTPREP;
 
-		if (req) {
-			mutex_lock(&host->lock);
-			mspro_block_process_request(card, req);
-			mutex_unlock(&host->lock);
-		}
-	}
-	dev_dbg(&card->dev, "thread finished\n");
-	return 0;
+	return BLKPREP_OK;
 }
 
-static void mspro_block_request(struct request_queue *q)
+static void mspro_block_submit_req(struct request_queue *q)
 {
 	struct memstick_dev *card = q->queuedata;
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
 	struct request *req = NULL;
 
-	if (msb->q_thread) {
-		msb->has_request = 1;
-		wake_up_all(&msb->q_wait);
-	} else {
+	if (msb->has_request)
+		return;
+
+	if (msb->eject) {
 		while ((req = elv_next_request(q)) != NULL)
 			end_queued_request(req, -ENODEV);
+
+		return;
 	}
+
+	msb->has_request = 1;
+	if (mspro_block_issue_req(card, 0))
+		msb->has_request = 0;
 }
 
 /*** Initialization ***/
@@ -1200,16 +1203,14 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 		goto out_release_id;
 	}
 
-	spin_lock_init(&msb->q_lock);
-	init_waitqueue_head(&msb->q_wait);
-
-	msb->queue = blk_init_queue(mspro_block_request, &msb->q_lock);
+	msb->queue = blk_init_queue(mspro_block_submit_req, &msb->q_lock);
 	if (!msb->queue) {
 		rc = -ENOMEM;
 		goto out_put_disk;
 	}
 
 	msb->queue->queuedata = card;
+	blk_queue_prep_rq(msb->queue, mspro_block_prepare_req);
 
 	blk_queue_bounce_limit(msb->queue, limit);
 	blk_queue_max_sectors(msb->queue, MSPRO_BLOCK_MAX_PAGES);
@@ -1235,14 +1236,8 @@ static int mspro_block_init_disk(struct memstick_dev *card)
 	capacity *= msb->page_size >> 9;
 	set_capacity(msb->disk, capacity);
 	dev_dbg(&card->dev, "capacity set %ld\n", capacity);
-	msb->q_thread = kthread_run(mspro_block_queue_thread, card,
-				    DRIVER_NAME"d");
-	if (IS_ERR(msb->q_thread))
-		goto out_put_disk;
 
-	mutex_unlock(&host->lock);
 	add_disk(msb->disk);
-	mutex_lock(&host->lock);
 	msb->active = 1;
 	return 0;
 
@@ -1290,6 +1285,7 @@ static int mspro_block_probe(struct memstick_dev *card)
 		return -ENOMEM;
 	memstick_set_drvdata(card, msb);
 	msb->card = card;
+	spin_lock_init(&msb->q_lock);
 
 	rc = mspro_block_init_card(card);
 
@@ -1319,26 +1315,17 @@ out_free:
 static void mspro_block_remove(struct memstick_dev *card)
 {
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
-	struct task_struct *q_thread = NULL;
 	unsigned long flags;
 
 	del_gendisk(msb->disk);
 	dev_dbg(&card->dev, "mspro block remove\n");
 	spin_lock_irqsave(&msb->q_lock, flags);
-	q_thread = msb->q_thread;
-	msb->q_thread = NULL;
-	msb->active = 0;
+	msb->eject = 1;
+	blk_start_queue(msb->queue);
 	spin_unlock_irqrestore(&msb->q_lock, flags);
 
-	if (q_thread) {
-		mutex_unlock(&card->host->lock);
-		kthread_stop(q_thread);
-		mutex_lock(&card->host->lock);
-	}
-
-	dev_dbg(&card->dev, "queue thread stopped\n");
-
 	blk_cleanup_queue(msb->queue);
+	msb->queue = NULL;
 
 	sysfs_remove_group(&card->dev.kobj, &msb->attr_group);
 
@@ -1355,19 +1342,13 @@ static void mspro_block_remove(struct memstick_dev *card)
 static int mspro_block_suspend(struct memstick_dev *card, pm_message_t state)
 {
 	struct mspro_block_data *msb = memstick_get_drvdata(card);
-	struct task_struct *q_thread = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&msb->q_lock, flags);
-	q_thread = msb->q_thread;
-	msb->q_thread = NULL;
-	msb->active = 0;
 	blk_stop_queue(msb->queue);
+	msb->active = 0;
 	spin_unlock_irqrestore(&msb->q_lock, flags);
 
-	if (q_thread)
-		kthread_stop(q_thread);
-
 	return 0;
 }
 
@@ -1406,14 +1387,7 @@ static int mspro_block_resume(struct memstick_dev *card)
 			if (memcmp(s_attr->data, r_attr->data, s_attr->size))
 				break;
 
-			memstick_set_drvdata(card, msb);
-			msb->q_thread = kthread_run(mspro_block_queue_thread,
-						    card, DRIVER_NAME"d");
-			if (IS_ERR(msb->q_thread))
-				msb->q_thread = NULL;
-			else
-				msb->active = 1;
-
+			msb->active = 1;
 			break;
 		}
 	}
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index 9d82e67737d..3485c63d20b 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -50,6 +50,7 @@ struct jmb38x_ms_host {
 	struct jmb38x_ms        *chip;
 	void __iomem            *addr;
 	spinlock_t              lock;
+	struct tasklet_struct   notify;
 	int                     id;
 	char                    host_id[32];
 	int                     irq;
@@ -590,25 +591,35 @@ static void jmb38x_ms_abort(unsigned long data)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static void jmb38x_ms_request(struct memstick_host *msh)
+static void jmb38x_ms_req_tasklet(unsigned long data)
 {
+	struct memstick_host *msh = (struct memstick_host *)data;
 	struct jmb38x_ms_host *host = memstick_priv(msh);
 	unsigned long flags;
 	int rc;
 
 	spin_lock_irqsave(&host->lock, flags);
-	if (host->req) {
-		spin_unlock_irqrestore(&host->lock, flags);
-		BUG();
-		return;
+	if (!host->req) {
+		do {
+			rc = memstick_next_req(msh, &host->req);
+			dev_dbg(&host->chip->pdev->dev, "tasklet req %d\n", rc);
+		} while (!rc && jmb38x_ms_issue_cmd(msh));
 	}
-
-	do {
-		rc = memstick_next_req(msh, &host->req);
-	} while (!rc && jmb38x_ms_issue_cmd(msh));
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
+static void jmb38x_ms_dummy_submit(struct memstick_host *msh)
+{
+	return;
+}
+
+static void jmb38x_ms_submit_req(struct memstick_host *msh)
+{
+	struct jmb38x_ms_host *host = memstick_priv(msh);
+
+	tasklet_schedule(&host->notify);
+}
+
 static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
 {
 	int cnt;
@@ -816,7 +827,9 @@ static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt)
 		 host->id);
 	host->irq = jm->pdev->irq;
 	host->timeout_jiffies = msecs_to_jiffies(1000);
-	msh->request = jmb38x_ms_request;
+
+	tasklet_init(&host->notify, jmb38x_ms_req_tasklet, (unsigned long)msh);
+	msh->request = jmb38x_ms_submit_req;
 	msh->set_param = jmb38x_ms_set_param;
 
 	msh->caps = MEMSTICK_CAP_PAR4 | MEMSTICK_CAP_PAR8;
@@ -928,6 +941,8 @@ static void jmb38x_ms_remove(struct pci_dev *dev)
 
 		host = memstick_priv(jm->hosts[cnt]);
 
+		jm->hosts[cnt]->request = jmb38x_ms_dummy_submit;
+		tasklet_kill(&host->notify);
 		writel(0, host->addr + INT_SIGNAL_ENABLE);
 		writel(0, host->addr + INT_STATUS_ENABLE);
 		mmiowb();
diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c
index 14458764588..d32d6ad8f3f 100644
--- a/drivers/memstick/host/tifm_ms.c
+++ b/drivers/memstick/host/tifm_ms.c
@@ -71,6 +71,7 @@ struct tifm_ms {
 	struct tifm_dev         *dev;
 	struct timer_list       timer;
 	struct memstick_request *req;
+	struct tasklet_struct   notify;
 	unsigned int            mode_mask;
 	unsigned int            block_pos;
 	unsigned long           timeout_jiffies;
@@ -455,40 +456,45 @@ static void tifm_ms_card_event(struct tifm_dev *sock)
 	return;
 }
 
-static void tifm_ms_request(struct memstick_host *msh)
+static void tifm_ms_req_tasklet(unsigned long data)
 {
+	struct memstick_host *msh = (struct memstick_host *)data;
 	struct tifm_ms *host = memstick_priv(msh);
 	struct tifm_dev *sock = host->dev;
 	unsigned long flags;
 	int rc;
 
 	spin_lock_irqsave(&sock->lock, flags);
-	if (host->req) {
-		printk(KERN_ERR "%s : unfinished request detected\n",
-		       sock->dev.bus_id);
-		spin_unlock_irqrestore(&sock->lock, flags);
-		tifm_eject(host->dev);
-		return;
-	}
+	if (!host->req) {
+		if (host->eject) {
+			do {
+				rc = memstick_next_req(msh, &host->req);
+				if (!rc)
+					host->req->error = -ETIME;
+			} while (!rc);
+			spin_unlock_irqrestore(&sock->lock, flags);
+			return;
+		}
 
-	if (host->eject) {
 		do {
 			rc = memstick_next_req(msh, &host->req);
-			if (!rc)
-				host->req->error = -ETIME;
-		} while (!rc);
-		spin_unlock_irqrestore(&sock->lock, flags);
-		return;
+		} while (!rc && tifm_ms_issue_cmd(host));
 	}
-
-	do {
-		rc = memstick_next_req(msh, &host->req);
-	} while (!rc && tifm_ms_issue_cmd(host));
-
 	spin_unlock_irqrestore(&sock->lock, flags);
+}
+
+static void tifm_ms_dummy_submit(struct memstick_host *msh)
+{
 	return;
 }
 
+static void tifm_ms_submit_req(struct memstick_host *msh)
+{
+	struct tifm_ms *host = memstick_priv(msh);
+
+	tasklet_schedule(&host->notify);
+}
+
 static int tifm_ms_set_param(struct memstick_host *msh,
 			     enum memstick_param param,
 			     int value)
@@ -569,8 +575,9 @@ static int tifm_ms_probe(struct tifm_dev *sock)
 	host->timeout_jiffies = msecs_to_jiffies(1000);
 
 	setup_timer(&host->timer, tifm_ms_abort, (unsigned long)host);
+	tasklet_init(&host->notify, tifm_ms_req_tasklet, (unsigned long)msh);
 
-	msh->request = tifm_ms_request;
+	msh->request = tifm_ms_submit_req;
 	msh->set_param = tifm_ms_set_param;
 	sock->card_event = tifm_ms_card_event;
 	sock->data_event = tifm_ms_data_event;
@@ -592,6 +599,8 @@ static void tifm_ms_remove(struct tifm_dev *sock)
 	int rc = 0;
 	unsigned long flags;
 
+	msh->request = tifm_ms_dummy_submit;
+	tasklet_kill(&host->notify);
 	spin_lock_irqsave(&sock->lock, flags);
 	host->eject = 1;
 	if (host->req) {
-- 
cgit v1.2.3


From 7fccf0326536c1b245b98740d489abb9aab69a12 Mon Sep 17 00:00:00 2001
From: WANG Cong <xiyou.wangcong@gmail.com>
Date: Fri, 25 Jul 2008 19:45:02 -0700
Subject: kernel/kexec.c: make 'kimage_terminate' void

Since kimage_terminate() always returns 0, make it void.

Signed-off-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/kexec.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/kernel/kexec.c b/kernel/kexec.c
index 1c5fcacbcf3..6db42ff8d52 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -589,14 +589,12 @@ static void kimage_free_extra_pages(struct kimage *image)
 	kimage_free_page_list(&image->unuseable_pages);
 
 }
-static int kimage_terminate(struct kimage *image)
+static void kimage_terminate(struct kimage *image)
 {
 	if (*image->entry != 0)
 		image->entry++;
 
 	*image->entry = IND_DONE;
-
-	return 0;
 }
 
 #define for_each_kimage_entry(image, ptr, entry) \
@@ -997,9 +995,7 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 			if (result)
 				goto out;
 		}
-		result = kimage_terminate(image);
-		if (result)
-			goto out;
+		kimage_terminate(image);
 	}
 	/* Install the new kernel, and  Uninstall the old */
 	image = xchg(dest_image, image);
-- 
cgit v1.2.3


From 3ab83521378268044a448113c6aa9a9e245f4d2f Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 25 Jul 2008 19:45:07 -0700
Subject: kexec jump

This patch provides an enhancement to kexec/kdump.  It implements the
following features:

- Backup/restore memory used by the original kernel before/after
  kexec.

- Save/restore CPU state before/after kexec.

The features of this patch can be used as a general method to call program in
physical mode (paging turning off).  This can be used to call BIOS code under
Linux.

kexec-tools needs to be patched to support kexec jump. The patches and
the precompiled kexec can be download from the following URL:

       source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2
       patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2
       binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10

Usage example of calling some physical mode code and return:

1. Compile and install patched kernel with following options selected:

CONFIG_X86_32=y
CONFIG_KEXEC=y
CONFIG_PM=y
CONFIG_KEXEC_JUMP=y

2. Build patched kexec-tool or download the pre-built one.

3. Build some physical mode executable named such as "phy_mode"

4. Boot kernel compiled in step 1.

5. Load physical mode executable with /sbin/kexec. The shell command
   line can be as follow:

   /sbin/kexec --load-preserve-context --args-none phy_mode

6. Call physical mode executable with following shell command line:

   /sbin/kexec -e

Implementation point:

To support jumping without reserving memory.  One shadow backup page (source
page) is allocated for each page used by kexeced code image (destination
page).  When do kexec_load, the image of kexeced code is loaded into source
pages, and before executing, the destination pages and the source pages are
swapped, so the contents of destination pages are backupped.  Before jumping
to the kexeced code image and after jumping back to the original kernel, the
destination pages and the source pages are swapped too.

C ABI (calling convention) is used as communication protocol between
kernel and called code.

A flag named KEXEC_PRESERVE_CONTEXT for sys_kexec_load is added to
indicate that the loaded kernel image is used for jumping back.

Now, only the i386 architecture is supported.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/kernel/machine_kexec.c  |   2 +-
 arch/sh/kernel/machine_kexec.c       |   2 +-
 arch/x86/Kconfig                     |   7 ++
 arch/x86/kernel/machine_kexec_32.c   |  27 ++++--
 arch/x86/kernel/machine_kexec_64.c   |   2 +-
 arch/x86/kernel/relocate_kernel_32.S | 174 ++++++++++++++++++++++++++++++-----
 include/asm-x86/kexec.h              |  18 ++--
 include/linux/kexec.h                |  17 +++-
 kernel/kexec.c                       |  57 ++++++++++++
 kernel/sys.c                         |  31 ++-----
 10 files changed, 269 insertions(+), 68 deletions(-)

diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 29a0e039d43..aab76887a84 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -48,7 +48,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	if (ppc_md.machine_kexec)
 		ppc_md.machine_kexec(image);
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 5c17de51987..ec1eadce4aa 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -70,7 +70,7 @@ static void kexec_info(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 
 	unsigned long page_list;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e3cba0b4560..7ecb679f013 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1279,6 +1279,13 @@ config CRASH_DUMP
 	  (CONFIG_RELOCATABLE=y).
 	  For more details see Documentation/kdump/kdump.txt
 
+config KEXEC_JUMP
+	bool "kexec jump (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on KEXEC && PM_SLEEP && X86_32
+	help
+	  Invoke code in physical address mode via KEXEC
+
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
 	default "0x1000000" if X86_NUMAQ
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 8864230d55a..2b67609d0a1 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -22,6 +22,7 @@
 #include <asm/cpufeature.h>
 #include <asm/desc.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 
 #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
 static u32 kexec_pgd[1024] PAGE_ALIGNED;
@@ -85,10 +86,12 @@ static void load_segments(void)
  * reboot code buffer to allow us to avoid allocations
  * later.
  *
- * Currently nothing.
+ * Make control page executable.
  */
 int machine_kexec_prepare(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_x(image->control_code_page, 1);
 	return 0;
 }
 
@@ -98,16 +101,24 @@ int machine_kexec_prepare(struct kimage *image)
  */
 void machine_kexec_cleanup(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_nx(image->control_code_page, 1);
 }
 
 /*
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
+	asmlinkage unsigned long
+		(*relocate_kernel_ptr)(unsigned long indirection_page,
+				       unsigned long control_page,
+				       unsigned long start_address,
+				       unsigned int has_pae,
+				       unsigned int preserve_context);
 
 	tracer_disable();
 
@@ -115,10 +126,11 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	local_irq_disable();
 
 	control_page = page_address(image->control_code_page);
-	memcpy(control_page, relocate_kernel, PAGE_SIZE);
+	memcpy(control_page, relocate_kernel, PAGE_SIZE/2);
 
+	relocate_kernel_ptr = control_page;
 	page_list[PA_CONTROL_PAGE] = __pa(control_page);
-	page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
+	page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
 	page_list[PA_PGD] = __pa(kexec_pgd);
 	page_list[VA_PGD] = (unsigned long)kexec_pgd;
 #ifdef CONFIG_X86_PAE
@@ -131,6 +143,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
 	page_list[PA_PTE_1] = __pa(kexec_pte1);
 	page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
+	page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT);
 
 	/* The segment registers are funny things, they have both a
 	 * visible and an invisible part.  Whenever the visible part is
@@ -149,8 +162,10 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	set_idt(phys_to_virt(0),0);
 
 	/* now call it */
-	relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
-			image->start, cpu_has_pae);
+	image->start = relocate_kernel_ptr((unsigned long)image->head,
+					   (unsigned long)page_list,
+					   image->start, cpu_has_pae,
+					   image->preserve_context);
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 9dd9262693a..c43caa3a91f 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -181,7 +181,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index c30fe25d470..703310a9902 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -20,11 +20,44 @@
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define PAE_PGD_ATTR (_PAGE_PRESENT)
 
+/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are
+ * used to save some data for jumping back
+ */
+#define DATA(offset)		(PAGE_SIZE/2+(offset))
+
+/* Minimal CPU state */
+#define ESP			DATA(0x0)
+#define CR0			DATA(0x4)
+#define CR3			DATA(0x8)
+#define CR4			DATA(0xc)
+
+/* other data */
+#define CP_VA_CONTROL_PAGE	DATA(0x10)
+#define CP_PA_PGD		DATA(0x14)
+#define CP_PA_SWAP_PAGE		DATA(0x18)
+#define CP_PA_BACKUP_PAGES_MAP	DATA(0x1c)
+
 	.text
 	.align PAGE_SIZE
 	.globl relocate_kernel
 relocate_kernel:
-	movl	8(%esp), %ebp /* list of pages */
+	/* Save the CPU context, used for jumping back */
+
+	pushl	%ebx
+	pushl	%esi
+	pushl	%edi
+	pushl	%ebp
+	pushf
+
+	movl	20+8(%esp), %ebp /* list of pages */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%esp, ESP(%edi)
+	movl	%cr0, %eax
+	movl	%eax, CR0(%edi)
+	movl	%cr3, %eax
+	movl	%eax, CR3(%edi)
+	movl	%cr4, %eax
+	movl	%eax, CR4(%edi)
 
 #ifdef CONFIG_X86_PAE
 	/* map the control page at its virtual address */
@@ -138,15 +171,25 @@ relocate_kernel:
 
 relocate_new_kernel:
 	/* read the arguments and say goodbye to the stack */
-	movl  4(%esp), %ebx /* page_list */
-	movl  8(%esp), %ebp /* list of pages */
-	movl  12(%esp), %edx /* start address */
-	movl  16(%esp), %ecx /* cpu_has_pae */
+	movl  20+4(%esp), %ebx /* page_list */
+	movl  20+8(%esp), %ebp /* list of pages */
+	movl  20+12(%esp), %edx /* start address */
+	movl  20+16(%esp), %ecx /* cpu_has_pae */
+	movl  20+20(%esp), %esi /* preserve_context */
 
 	/* zero out flags, and disable interrupts */
 	pushl $0
 	popfl
 
+	/* save some information for jumping back */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%edi, CP_VA_CONTROL_PAGE(%edi)
+	movl	PTR(PA_PGD)(%ebp), %eax
+	movl	%eax, CP_PA_PGD(%edi)
+	movl	PTR(PA_SWAP_PAGE)(%ebp), %eax
+	movl	%eax, CP_PA_SWAP_PAGE(%edi)
+	movl	%ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
+
 	/* get physical address of control page now */
 	/* this is impossible after page table switch */
 	movl	PTR(PA_CONTROL_PAGE)(%ebp), %edi
@@ -197,8 +240,90 @@ identity_mapped:
 	xorl	%eax, %eax
 	movl	%eax, %cr3
 
+	movl	CP_PA_SWAP_PAGE(%edi), %eax
+	pushl	%eax
+	pushl	%ebx
+	call	swap_pages
+	addl	$8, %esp
+
+	/* To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB, it's handy, and not processor dependent.
+	 */
+	xorl	%eax, %eax
+	movl	%eax, %cr3
+
+	/* set all of the registers to known values */
+	/* leave %esp alone */
+
+	testl	%esi, %esi
+	jnz 1f
+	xorl	%edi, %edi
+	xorl	%eax, %eax
+	xorl	%ebx, %ebx
+	xorl    %ecx, %ecx
+	xorl    %edx, %edx
+	xorl    %esi, %esi
+	xorl    %ebp, %ebp
+	ret
+1:
+	popl	%edx
+	movl	CP_PA_SWAP_PAGE(%edi), %esp
+	addl	$PAGE_SIZE, %esp
+2:
+	call	*%edx
+
+	/* get the re-entry point of the peer system */
+	movl	0(%esp), %ebp
+	call	1f
+1:
+	popl	%ebx
+	subl	$(1b - relocate_kernel), %ebx
+	movl	CP_VA_CONTROL_PAGE(%ebx), %edi
+	lea	PAGE_SIZE(%ebx), %esp
+	movl	CP_PA_SWAP_PAGE(%ebx), %eax
+	movl	CP_PA_BACKUP_PAGES_MAP(%ebx), %edx
+	pushl	%eax
+	pushl	%edx
+	call	swap_pages
+	addl	$8, %esp
+	movl	CP_PA_PGD(%ebx), %eax
+	movl	%eax, %cr3
+	movl	%cr0, %eax
+	orl	$(1<<31), %eax
+	movl	%eax, %cr0
+	lea	PAGE_SIZE(%edi), %esp
+	movl	%edi, %eax
+	addl	$(virtual_mapped - relocate_kernel), %eax
+	pushl	%eax
+	ret
+
+virtual_mapped:
+	movl	CR4(%edi), %eax
+	movl	%eax, %cr4
+	movl	CR3(%edi), %eax
+	movl	%eax, %cr3
+	movl	CR0(%edi), %eax
+	movl	%eax, %cr0
+	movl	ESP(%edi), %esp
+	movl	%ebp, %eax
+
+	popf
+	popl	%ebp
+	popl	%edi
+	popl	%esi
+	popl	%ebx
+	ret
+
 	/* Do the copies */
-	movl	%ebx, %ecx
+swap_pages:
+	movl	8(%esp), %edx
+	movl	4(%esp), %ecx
+	pushl	%ebp
+	pushl	%ebx
+	pushl	%edi
+	pushl	%esi
+	movl	%ecx, %ebx
 	jmp	1f
 
 0:	/* top, read another word from the indirection page */
@@ -226,27 +351,28 @@ identity_mapped:
 	movl    %ecx,   %esi /* For every source page do a copy */
 	andl    $0xfffff000, %esi
 
+	movl	%edi, %eax
+	movl	%esi, %ebp
+
+	movl	%edx, %edi
 	movl    $1024, %ecx
 	rep ; movsl
-	jmp     0b
 
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * I need to execute a serializing instruction here.
-	 * So I flush the TLB, it's handy, and not processor dependent.
-	 */
-	xorl	%eax, %eax
-	movl	%eax, %cr3
+	movl	%ebp, %edi
+	movl	%eax, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	/* set all of the registers to known values */
-	/* leave %esp alone */
+	movl	%eax, %edi
+	movl	%edx, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	xorl	%eax, %eax
-	xorl	%ebx, %ebx
-	xorl    %ecx, %ecx
-	xorl    %edx, %edx
-	xorl    %esi, %esi
-	xorl    %edi, %edi
-	xorl    %ebp, %ebp
+	lea	PAGE_SIZE(%ebp), %esi
+	jmp     0b
+3:
+	popl	%esi
+	popl	%edi
+	popl	%ebx
+	popl	%ebp
 	ret
diff --git a/include/asm-x86/kexec.h b/include/asm-x86/kexec.h
index 8f855a15f64..c0e52a14fd4 100644
--- a/include/asm-x86/kexec.h
+++ b/include/asm-x86/kexec.h
@@ -10,14 +10,15 @@
 # define VA_PTE_0		5
 # define PA_PTE_1		6
 # define VA_PTE_1		7
+# define PA_SWAP_PAGE		8
 # ifdef CONFIG_X86_PAE
-#  define PA_PMD_0		8
-#  define VA_PMD_0		9
-#  define PA_PMD_1		10
-#  define VA_PMD_1		11
-#  define PAGES_NR		12
+#  define PA_PMD_0		9
+#  define VA_PMD_0		10
+#  define PA_PMD_1		11
+#  define VA_PMD_1		12
+#  define PAGES_NR		13
 # else
-#  define PAGES_NR		8
+#  define PAGES_NR		9
 # endif
 #else
 # define PA_CONTROL_PAGE	0
@@ -152,11 +153,12 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 }
 
 #ifdef CONFIG_X86_32
-asmlinkage NORET_TYPE void
+asmlinkage unsigned long
 relocate_kernel(unsigned long indirection_page,
 		unsigned long control_page,
 		unsigned long start_address,
-		unsigned int has_pae) ATTRIB_NORET;
+		unsigned int has_pae,
+		unsigned int preserve_context);
 #else
 NORET_TYPE void
 relocate_kernel(unsigned long indirection_page,
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 3265968cd2c..82f88a8a827 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -83,6 +83,7 @@ struct kimage {
 
 	unsigned long start;
 	struct page *control_code_page;
+	struct page *swap_page;
 
 	unsigned long nr_segments;
 	struct kexec_segment segment[KEXEC_SEGMENT_MAX];
@@ -98,18 +99,20 @@ struct kimage {
 	unsigned int type : 1;
 #define KEXEC_TYPE_DEFAULT 0
 #define KEXEC_TYPE_CRASH   1
+	unsigned int preserve_context : 1;
 };
 
 
 
 /* kexec interface functions */
-extern NORET_TYPE void machine_kexec(struct kimage *image) ATTRIB_NORET;
+extern void machine_kexec(struct kimage *image);
 extern int machine_kexec_prepare(struct kimage *image);
 extern void machine_kexec_cleanup(struct kimage *image);
 extern asmlinkage long sys_kexec_load(unsigned long entry,
 					unsigned long nr_segments,
 					struct kexec_segment __user *segments,
 					unsigned long flags);
+extern int kernel_kexec(void);
 #ifdef CONFIG_COMPAT
 extern asmlinkage long compat_sys_kexec_load(unsigned long entry,
 				unsigned long nr_segments,
@@ -156,8 +159,9 @@ extern struct kimage *kexec_crash_image;
 #define kexec_flush_icache_page(page)
 #endif
 
-#define KEXEC_ON_CRASH  0x00000001
-#define KEXEC_ARCH_MASK 0xffff0000
+#define KEXEC_ON_CRASH		0x00000001
+#define KEXEC_PRESERVE_CONTEXT	0x00000002
+#define KEXEC_ARCH_MASK		0xffff0000
 
 /* These values match the ELF architecture values.
  * Unless there is a good reason that should continue to be the case.
@@ -174,7 +178,12 @@ extern struct kimage *kexec_crash_image;
 #define KEXEC_ARCH_MIPS_LE (10 << 16)
 #define KEXEC_ARCH_MIPS    ( 8 << 16)
 
-#define KEXEC_FLAGS    (KEXEC_ON_CRASH)  /* List of defined/legal kexec flags */
+/* List of defined/legal kexec flags */
+#ifndef CONFIG_KEXEC_JUMP
+#define KEXEC_FLAGS    KEXEC_ON_CRASH
+#else
+#define KEXEC_FLAGS    (KEXEC_ON_CRASH | KEXEC_PRESERVE_CONTEXT)
+#endif
 
 #define VMCOREINFO_BYTES           (4096)
 #define VMCOREINFO_NOTE_NAME       "VMCOREINFO"
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 6db42ff8d52..a0d920915b3 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -24,6 +24,8 @@
 #include <linux/utsrelease.h>
 #include <linux/utsname.h>
 #include <linux/numa.h>
+#include <linux/suspend.h>
+#include <linux/device.h>
 
 #include <asm/page.h>
 #include <asm/uaccess.h>
@@ -242,6 +244,12 @@ static int kimage_normal_alloc(struct kimage **rimage, unsigned long entry,
 		goto out;
 	}
 
+	image->swap_page = kimage_alloc_control_pages(image, 0);
+	if (!image->swap_page) {
+		printk(KERN_ERR "Could not allocate swap buffer\n");
+		goto out;
+	}
+
 	result = 0;
  out:
 	if (result == 0)
@@ -986,6 +994,8 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 		if (result)
 			goto out;
 
+		if (flags & KEXEC_PRESERVE_CONTEXT)
+			image->preserve_context = 1;
 		result = machine_kexec_prepare(image);
 		if (result)
 			goto out;
@@ -1411,3 +1421,50 @@ static int __init crash_save_vmcoreinfo_init(void)
 }
 
 module_init(crash_save_vmcoreinfo_init)
+
+/**
+ *	kernel_kexec - reboot the system
+ *
+ *	Move into place and start executing a preloaded standalone
+ *	executable.  If nothing was preloaded return an error.
+ */
+int kernel_kexec(void)
+{
+	int error = 0;
+
+	if (xchg(&kexec_lock, 1))
+		return -EBUSY;
+	if (!kexec_image) {
+		error = -EINVAL;
+		goto Unlock;
+	}
+
+	if (kexec_image->preserve_context) {
+#ifdef CONFIG_KEXEC_JUMP
+		local_irq_disable();
+		save_processor_state();
+#endif
+	} else {
+		blocking_notifier_call_chain(&reboot_notifier_list,
+					     SYS_RESTART, NULL);
+		system_state = SYSTEM_RESTART;
+		device_shutdown();
+		sysdev_shutdown();
+		printk(KERN_EMERG "Starting new kernel\n");
+		machine_shutdown();
+	}
+
+	machine_kexec(kexec_image);
+
+	if (kexec_image->preserve_context) {
+#ifdef CONFIG_KEXEC_JUMP
+		restore_processor_state();
+		local_irq_enable();
+#endif
+	}
+
+ Unlock:
+	xchg(&kexec_lock, 0);
+
+	return error;
+}
diff --git a/kernel/sys.c b/kernel/sys.c
index 0c9d3fa1f5f..c01858090a9 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -301,26 +301,6 @@ void kernel_restart(char *cmd)
 }
 EXPORT_SYMBOL_GPL(kernel_restart);
 
-/**
- *	kernel_kexec - reboot the system
- *
- *	Move into place and start executing a preloaded standalone
- *	executable.  If nothing was preloaded return an error.
- */
-static void kernel_kexec(void)
-{
-#ifdef CONFIG_KEXEC
-	struct kimage *image;
-	image = xchg(&kexec_image, NULL);
-	if (!image)
-		return;
-	kernel_restart_prepare(NULL);
-	printk(KERN_EMERG "Starting new kernel\n");
-	machine_shutdown();
-	machine_kexec(image);
-#endif
-}
-
 static void kernel_shutdown_prepare(enum system_states state)
 {
 	blocking_notifier_call_chain(&reboot_notifier_list,
@@ -425,10 +405,15 @@ asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user
 		kernel_restart(buffer);
 		break;
 
+#ifdef CONFIG_KEXEC
 	case LINUX_REBOOT_CMD_KEXEC:
-		kernel_kexec();
-		unlock_kernel();
-		return -EINVAL;
+		{
+			int ret;
+			ret = kernel_kexec();
+			unlock_kernel();
+			return ret;
+		}
+#endif
 
 #ifdef CONFIG_HIBERNATION
 	case LINUX_REBOOT_CMD_SW_SUSPEND:
-- 
cgit v1.2.3


From 89081d17f7bb81d89fa1aa9b70f821c5cf4d39e9 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 25 Jul 2008 19:45:10 -0700
Subject: kexec jump: save/restore device state

This patch implements devices state save/restore before after kexec.

This patch together with features in kexec_jump patch can be used for
following:

- A simple hibernation implementation without ACPI support.  You can kexec a
  hibernating kernel, save the memory image of original system and shutdown
  the system.  When resuming, you restore the memory image of original system
  via ordinary kexec load then jump back.

- Kernel/system debug through making system snapshot.  You can make system
  snapshot, jump back, do some thing and make another system snapshot.

- Cooperative multi-kernel/system.  With kexec jump, you can switch between
  several kernels/systems quickly without boot process except the first time.
  This appears like swap a whole kernel/system out/in.

- A general method to call program in physical mode (paging turning
  off). This can be used to invoke BIOS code under Linux.

The following user-space tools can be used with kexec jump:

- kexec-tools needs to be patched to support kexec jump. The patches
  and the precompiled kexec can be download from the following URL:
       source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2
       patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2
       binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10

- makedumpfile with patches are used as memory image saving tool, it
  can exclude free pages from original kernel memory image file. The
  patches and the precompiled makedumpfile can be download from the
  following URL:
       source: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-src_cvs_kh10.tar.bz2
       patches: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-patches_cvs_kh10.tar.bz2
       binary: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile_cvs_kh10

- An initramfs image can be used as the root file system of kexeced
  kernel. An initramfs image built with "BuildRoot" can be downloaded
  from the following URL:
       initramfs image: http://khibernation.sourceforge.net/download/release_v10/initramfs/rootfs_cvs_kh10.gz
  All user space tools above are included in the initramfs image.

Usage example of simple hibernation:

1. Compile and install patched kernel with following options selected:

CONFIG_X86_32=y
CONFIG_RELOCATABLE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PM=y
CONFIG_HIBERNATION=y
CONFIG_KEXEC_JUMP=y

2. Build an initramfs image contains kexec-tool and makedumpfile, or
   download the pre-built initramfs image, called rootfs.gz in
   following text.

3. Prepare a partition to save memory image of original kernel, called
   hibernating partition in following text.

4. Boot kernel compiled in step 1 (kernel A).

5. In the kernel A, load kernel compiled in step 1 (kernel B) with
   /sbin/kexec. The shell command line can be as follow:

   /sbin/kexec --load-preserve-context /boot/bzImage --mem-min=0x100000
     --mem-max=0xffffff --initrd=rootfs.gz

6. Boot the kernel B with following shell command line:

   /sbin/kexec -e

7. The kernel B will boot as normal kexec. In kernel B the memory
   image of kernel A can be saved into hibernating partition as
   follow:

   jump_back_entry=`cat /proc/cmdline | tr ' ' '\n' | grep kexec_jump_back_entry | cut -d '='`
   echo $jump_back_entry > kexec_jump_back_entry
   cp /proc/vmcore dump.elf

   Then you can shutdown the machine as normal.

8. Boot kernel compiled in step 1 (kernel C). Use the rootfs.gz as
   root file system.

9. In kernel C, load the memory image of kernel A as follow:

   /sbin/kexec -l --args-none --entry=`cat kexec_jump_back_entry` dump.elf

10. Jump back to the kernel A as follow:

   /sbin/kexec -e

   Then, kernel A is resumed.

Implementation point:

To support jumping between two kernels, before jumping to (executing)
the new kernel and jumping back to the original kernel, the devices
are put into quiescent state, and the state of devices and CPU is
saved. After jumping back from kexeced kernel and jumping to the new
kernel, the state of devices and CPU are restored accordingly. The
devices/CPU state save/restore code of software suspend is called to
implement corresponding function.

Known issues:

- Because the segment number supported by sys_kexec_load is limited,
  hibernation image with many segments may not be load. This is
  planned to be eliminated by adding a new flag to sys_kexec_load to
  make a image can be loaded with multiple sys_kexec_load invoking.

Now, only the i386 architecture is supported.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/Kconfig                   |  5 +++--
 arch/x86/kernel/machine_kexec_32.c | 12 ++++++++++++
 include/linux/suspend.h            |  2 ++
 kernel/kexec.c                     | 39 ++++++++++++++++++++++++++++++++++++++
 kernel/power/power.h               |  2 --
 5 files changed, 56 insertions(+), 4 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7ecb679f013..6b2debfabdd 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1282,9 +1282,10 @@ config CRASH_DUMP
 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	depends on KEXEC && PM_SLEEP && X86_32
+	depends on KEXEC && HIBERNATION && X86_32
 	help
-	  Invoke code in physical address mode via KEXEC
+	  Jump between original kernel and kexeced kernel and invoke
+	  code in physical address mode via KEXEC
 
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 2b67609d0a1..9fe478d9840 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -125,6 +125,18 @@ void machine_kexec(struct kimage *image)
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
+	if (image->preserve_context) {
+#ifdef CONFIG_X86_IO_APIC
+		/* We need to put APICs in legacy mode so that we can
+		 * get timer interrupts in second kernel. kexec/kdump
+		 * paths already have calls to disable_IO_APIC() in
+		 * one form or other. kexec jump path also need
+		 * one.
+		 */
+		disable_IO_APIC();
+#endif
+	}
+
 	control_page = page_address(image->control_code_page);
 	memcpy(control_page, relocate_kernel, PAGE_SIZE/2);
 
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index e8e69159af7..c6343509597 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -278,4 +278,6 @@ static inline void register_nosave_region_late(unsigned long b, unsigned long e)
 }
 #endif
 
+extern struct mutex pm_mutex;
+
 #endif /* _LINUX_SUSPEND_H */
diff --git a/kernel/kexec.c b/kernel/kexec.c
index a0d920915b3..c8a4370e2a3 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -26,6 +26,10 @@
 #include <linux/numa.h>
 #include <linux/suspend.h>
 #include <linux/device.h>
+#include <linux/freezer.h>
+#include <linux/pm.h>
+#include <linux/cpu.h>
+#include <linux/console.h>
 
 #include <asm/page.h>
 #include <asm/uaccess.h>
@@ -1441,7 +1445,31 @@ int kernel_kexec(void)
 
 	if (kexec_image->preserve_context) {
 #ifdef CONFIG_KEXEC_JUMP
+		mutex_lock(&pm_mutex);
+		pm_prepare_console();
+		error = freeze_processes();
+		if (error) {
+			error = -EBUSY;
+			goto Restore_console;
+		}
+		suspend_console();
+		error = device_suspend(PMSG_FREEZE);
+		if (error)
+			goto Resume_console;
+		error = disable_nonboot_cpus();
+		if (error)
+			goto Resume_devices;
 		local_irq_disable();
+		/* At this point, device_suspend() has been called,
+		 * but *not* device_power_down(). We *must*
+		 * device_power_down() now.  Otherwise, drivers for
+		 * some devices (e.g. interrupt controllers) become
+		 * desynchronized with the actual state of the
+		 * hardware at resume time, and evil weirdness ensues.
+		 */
+		error = device_power_down(PMSG_FREEZE);
+		if (error)
+			goto Enable_irqs;
 		save_processor_state();
 #endif
 	} else {
@@ -1459,7 +1487,18 @@ int kernel_kexec(void)
 	if (kexec_image->preserve_context) {
 #ifdef CONFIG_KEXEC_JUMP
 		restore_processor_state();
+		device_power_up(PMSG_RESTORE);
+ Enable_irqs:
 		local_irq_enable();
+		enable_nonboot_cpus();
+ Resume_devices:
+		device_resume(PMSG_RESTORE);
+ Resume_console:
+		resume_console();
+		thaw_processes();
+ Restore_console:
+		pm_restore_console();
+		mutex_unlock(&pm_mutex);
 #endif
 	}
 
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 700f44ec840..acc0c101dbd 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -53,8 +53,6 @@ extern int hibernation_platform_enter(void);
 
 extern int pfn_is_nosave(unsigned long);
 
-extern struct mutex pm_mutex;
-
 #define power_attr(_name) \
 static struct kobj_attribute _name##_attr = {	\
 	.attr	= {				\
-- 
cgit v1.2.3


From c2147a5092cfe13dbf3210e54e8a622015edeecc Mon Sep 17 00:00:00 2001
From: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Date: Fri, 25 Jul 2008 19:45:11 -0700
Subject: Better interface for hooking early initcalls

Added early initcall (pre-SMP) support, using an identical interface to
that of regular initcalls.  Functions called from do_pre_smp_initcalls()
could be converted to use this cleaner interface.

This is required by CPU hotplug, because early users have to register
notifiers before going SMP.  One such CPU hotplug user is the relay
interface with buffer-only channels, which needs to register such a
notifier, to be usable in early code.  This in turn is used by kmemtrace.

Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/vmlinux.lds.h |  2 ++
 include/linux/init.h              |  7 +++++++
 init/main.c                       | 13 +++++++++++--
 3 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 729f6b0a60e..9cd44b162ba 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -359,6 +359,8 @@
 	}
 
 #define INITCALLS							\
+	*(.initcallearly.init)						\
+	__early_initcall_end = .;					\
   	*(.initcall0.init)						\
   	*(.initcall0s.init)						\
   	*(.initcall1.init)						\
diff --git a/include/linux/init.h b/include/linux/init.h
index 42ae95411a9..11b84e10605 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -169,6 +169,13 @@ extern void (*late_time_init)(void);
 	static initcall_t __initcall_##fn##id __used \
 	__attribute__((__section__(".initcall" level ".init"))) = fn
 
+/*
+ * Early initcalls run before initializing SMP.
+ *
+ * Only for built-in code, not modules.
+ */
+#define early_initcall(fn)		__define_initcall("early",fn,early)
+
 /*
  * A "pure" initcall has no dependencies on anything else, and purely
  * initializes variables that couldn't be statically initialized.
diff --git a/init/main.c b/init/main.c
index 0604cbcaf1e..b6fec08dbbe 100644
--- a/init/main.c
+++ b/init/main.c
@@ -743,13 +743,13 @@ static void __init do_one_initcall(initcall_t fn)
 }
 
 
-extern initcall_t __initcall_start[], __initcall_end[];
+extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];
 
 static void __init do_initcalls(void)
 {
 	initcall_t *call;
 
-	for (call = __initcall_start; call < __initcall_end; call++)
+	for (call = __early_initcall_end; call < __initcall_end; call++)
 		do_one_initcall(*call);
 
 	/* Make sure there is no pending stuff from the initcall sequence */
@@ -783,6 +783,14 @@ static int __init nosoftlockup_setup(char *str)
 }
 __setup("nosoftlockup", nosoftlockup_setup);
 
+static void __init __do_pre_smp_initcalls(void)
+{
+	initcall_t *call;
+
+	for (call = __initcall_start; call < __early_initcall_end; call++)
+		do_one_initcall(*call);
+}
+
 static void __init do_pre_smp_initcalls(void)
 {
 	extern int spawn_ksoftirqd(void);
@@ -865,6 +873,7 @@ static int __init kernel_init(void * unused)
 
 	smp_prepare_cpus(setup_max_cpus);
 
+	__do_pre_smp_initcalls();
 	do_pre_smp_initcalls();
 
 	smp_init();
-- 
cgit v1.2.3


From 7babe8db99d305340cf4828ce1f5a1481d5622ef Mon Sep 17 00:00:00 2001
From: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Date: Fri, 25 Jul 2008 19:45:11 -0700
Subject: Full conversion to early_initcall() interface, remove old interface

A previous patch added the early_initcall(), to allow a cleaner hooking of
pre-SMP initcalls.  Now we remove the older interface, converting all
existing users to the new one.

[akpm@linux-foundation.org: cleanups]
[akpm@linux-foundation.org: build fix]
[kosaki.motohiro@jp.fujitsu.com: warning fix]
[kosaki.motohiro@jp.fujitsu.com: warning fix]
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sched.h |  9 ---------
 include/linux/smp.h   |  5 -----
 init/main.c           | 23 +----------------------
 kernel/sched.c        |  5 ++++-
 kernel/smp.c          |  4 +++-
 kernel/softirq.c      |  3 ++-
 kernel/softlockup.c   | 25 ++++++++++++++++++++++---
 7 files changed, 32 insertions(+), 42 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index 3260a5c42b9..adb8077dc46 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -292,7 +292,6 @@ extern void sched_show_task(struct task_struct *p);
 
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 extern void softlockup_tick(void);
-extern void spawn_softlockup_task(void);
 extern void touch_softlockup_watchdog(void);
 extern void touch_all_softlockup_watchdogs(void);
 extern unsigned int  softlockup_panic;
@@ -2222,14 +2221,6 @@ static inline void inc_syscw(struct task_struct *tsk)
 }
 #endif
 
-#ifdef CONFIG_SMP
-void migration_init(void);
-#else
-static inline void migration_init(void)
-{
-}
-#endif
-
 #ifndef TASK_SIZE_OF
 #define TASK_SIZE_OF(tsk)	TASK_SIZE
 #endif
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 48262f86c96..66484d4a845 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -74,15 +74,10 @@ void __smp_call_function_single(int cpuid, struct call_single_data *data);
 #ifdef CONFIG_USE_GENERIC_SMP_HELPERS
 void generic_smp_call_function_single_interrupt(void);
 void generic_smp_call_function_interrupt(void);
-void init_call_single_data(void);
 void ipi_call_lock(void);
 void ipi_call_unlock(void);
 void ipi_call_lock_irq(void);
 void ipi_call_unlock_irq(void);
-#else
-static inline void init_call_single_data(void)
-{
-}
 #endif
 
 /*
diff --git a/init/main.c b/init/main.c
index b6fec08dbbe..20fdc9884b7 100644
--- a/init/main.c
+++ b/init/main.c
@@ -774,16 +774,7 @@ static void __init do_basic_setup(void)
 	do_initcalls();
 }
 
-static int __initdata nosoftlockup;
-
-static int __init nosoftlockup_setup(char *str)
-{
-	nosoftlockup = 1;
-	return 1;
-}
-__setup("nosoftlockup", nosoftlockup_setup);
-
-static void __init __do_pre_smp_initcalls(void)
+static void __init do_pre_smp_initcalls(void)
 {
 	initcall_t *call;
 
@@ -791,17 +782,6 @@ static void __init __do_pre_smp_initcalls(void)
 		do_one_initcall(*call);
 }
 
-static void __init do_pre_smp_initcalls(void)
-{
-	extern int spawn_ksoftirqd(void);
-
-	init_call_single_data();
-	migration_init();
-	spawn_ksoftirqd();
-	if (!nosoftlockup)
-		spawn_softlockup_task();
-}
-
 static void run_init_process(char *init_filename)
 {
 	argv_init[0] = init_filename;
@@ -873,7 +853,6 @@ static int __init kernel_init(void * unused)
 
 	smp_prepare_cpus(setup_max_cpus);
 
-	__do_pre_smp_initcalls();
 	do_pre_smp_initcalls();
 
 	smp_init();
diff --git a/kernel/sched.c b/kernel/sched.c
index 0047bd9b96a..fde1a102635 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6389,7 +6389,7 @@ static struct notifier_block __cpuinitdata migration_notifier = {
 	.priority = 10
 };
 
-void __init migration_init(void)
+static int __init migration_init(void)
 {
 	void *cpu = (void *)(long)smp_processor_id();
 	int err;
@@ -6399,7 +6399,10 @@ void __init migration_init(void)
 	BUG_ON(err == NOTIFY_BAD);
 	migration_call(&migration_notifier, CPU_ONLINE, cpu);
 	register_cpu_notifier(&migration_notifier);
+
+	return err;
 }
+early_initcall(migration_init);
 #endif
 
 #ifdef CONFIG_SMP
diff --git a/kernel/smp.c b/kernel/smp.c
index 462c785ca1e..96fc7c0edc5 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -33,7 +33,7 @@ struct call_single_queue {
 	spinlock_t lock;
 };
 
-void __cpuinit init_call_single_data(void)
+static int __cpuinit init_call_single_data(void)
 {
 	int i;
 
@@ -43,7 +43,9 @@ void __cpuinit init_call_single_data(void)
 		spin_lock_init(&q->lock);
 		INIT_LIST_HEAD(&q->list);
 	}
+	return 0;
 }
+early_initcall(init_call_single_data);
 
 static void csd_flag_wait(struct call_single_data *data)
 {
diff --git a/kernel/softirq.c b/kernel/softirq.c
index f6b03d56c2b..c506f266a6b 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -630,7 +630,7 @@ static struct notifier_block __cpuinitdata cpu_nfb = {
 	.notifier_call = cpu_callback
 };
 
-__init int spawn_ksoftirqd(void)
+static __init int spawn_ksoftirqd(void)
 {
 	void *cpu = (void *)(long)smp_processor_id();
 	int err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
@@ -640,6 +640,7 @@ __init int spawn_ksoftirqd(void)
 	register_cpu_notifier(&cpu_nfb);
 	return 0;
 }
+early_initcall(spawn_ksoftirqd);
 
 #ifdef CONFIG_SMP
 /*
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 7bd8d1aadd5..b75b492fbfc 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -338,14 +338,33 @@ static struct notifier_block __cpuinitdata cpu_nfb = {
 	.notifier_call = cpu_callback
 };
 
-__init void spawn_softlockup_task(void)
+static int __initdata nosoftlockup;
+
+static int __init nosoftlockup_setup(char *str)
+{
+	nosoftlockup = 1;
+	return 1;
+}
+__setup("nosoftlockup", nosoftlockup_setup);
+
+static int __init spawn_softlockup_task(void)
 {
 	void *cpu = (void *)(long)smp_processor_id();
-	int err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
+	int err;
 
-	BUG_ON(err == NOTIFY_BAD);
+	if (nosoftlockup)
+		return 0;
+
+	err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
+	if (err == NOTIFY_BAD) {
+		BUG();
+		return 1;
+	}
 	cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
 	register_cpu_notifier(&cpu_nfb);
 
 	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
+
+	return 0;
 }
+early_initcall(spawn_softlockup_task);
-- 
cgit v1.2.3


From 20d8b67c06fa5e74f44e80b0a0fd68c8327f7c6a Mon Sep 17 00:00:00 2001
From: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Date: Fri, 25 Jul 2008 19:45:12 -0700
Subject: relay: add buffer-only channels; useful for early logging

Allows one to create and use a channel with no associated files.  Files
can be initialized later.  This is useful in scenarios such as logging in
early code, before VFS is up.  Therefore, such channels can be created and
used as soon as kmem_cache_init() completed.

This is needed by kmemtrace to do tracing in early kernel code.

[kosaki.motohiro@jp.fujitsu.com: build fix]
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/relay.txt |  10 +++
 include/linux/relay.h               |   5 ++
 kernel/relay.c                      | 170 ++++++++++++++++++++++++++++++------
 3 files changed, 156 insertions(+), 29 deletions(-)

diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.txt
index 094f2d2f38b..510b722667a 100644
--- a/Documentation/filesystems/relay.txt
+++ b/Documentation/filesystems/relay.txt
@@ -294,6 +294,16 @@ user-defined data with a channel, and is immediately available
 (including in create_buf_file()) via chan->private_data or
 buf->chan->private_data.
 
+Buffer-only channels
+--------------------
+
+These channels have no files associated and can be created with
+relay_open(NULL, NULL, ...). Such channels are useful in scenarios such
+as when doing early tracing in the kernel, before the VFS is up. In these
+cases, one may open a buffer-only channel and then call
+relay_late_setup_files() when the kernel is ready to handle files,
+to expose the buffered data to the userspace.
+
 Channel 'modes'
 ---------------
 
diff --git a/include/linux/relay.h b/include/linux/relay.h
index 6cd8c4425fc..953fc055e87 100644
--- a/include/linux/relay.h
+++ b/include/linux/relay.h
@@ -48,6 +48,7 @@ struct rchan_buf
 	size_t *padding;		/* padding counts per sub-buffer */
 	size_t prev_padding;		/* temporary variable */
 	size_t bytes_consumed;		/* bytes consumed in cur read subbuf */
+	size_t early_bytes;		/* bytes consumed before VFS inited */
 	unsigned int cpu;		/* this buf's cpu */
 } ____cacheline_aligned;
 
@@ -68,6 +69,7 @@ struct rchan
 	int is_global;			/* One global buffer ? */
 	struct list_head list;		/* for channel list */
 	struct dentry *parent;		/* parent dentry passed to open */
+	int has_base_filename;		/* has a filename associated? */
 	char base_filename[NAME_MAX];	/* saved base filename */
 };
 
@@ -169,6 +171,9 @@ struct rchan *relay_open(const char *base_filename,
 			 size_t n_subbufs,
 			 struct rchan_callbacks *cb,
 			 void *private_data);
+extern int relay_late_setup_files(struct rchan *chan,
+				  const char *base_filename,
+				  struct dentry *parent);
 extern void relay_close(struct rchan *chan);
 extern void relay_flush(struct rchan *chan);
 extern void relay_subbufs_consumed(struct rchan *chan,
diff --git a/kernel/relay.c b/kernel/relay.c
index 7de644cdec4..04006ef970b 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -407,6 +407,35 @@ void relay_reset(struct rchan *chan)
 }
 EXPORT_SYMBOL_GPL(relay_reset);
 
+static inline void relay_set_buf_dentry(struct rchan_buf *buf,
+					struct dentry *dentry)
+{
+	buf->dentry = dentry;
+	buf->dentry->d_inode->i_size = buf->early_bytes;
+}
+
+static struct dentry *relay_create_buf_file(struct rchan *chan,
+					    struct rchan_buf *buf,
+					    unsigned int cpu)
+{
+	struct dentry *dentry;
+	char *tmpname;
+
+	tmpname = kzalloc(NAME_MAX + 1, GFP_KERNEL);
+	if (!tmpname)
+		return NULL;
+	snprintf(tmpname, NAME_MAX, "%s%d", chan->base_filename, cpu);
+
+	/* Create file in fs */
+	dentry = chan->cb->create_buf_file(tmpname, chan->parent,
+					   S_IRUSR, buf,
+					   &chan->is_global);
+
+	kfree(tmpname);
+
+	return dentry;
+}
+
 /*
  *	relay_open_buf - create a new relay channel buffer
  *
@@ -416,45 +445,34 @@ static struct rchan_buf *relay_open_buf(struct rchan *chan, unsigned int cpu)
 {
  	struct rchan_buf *buf = NULL;
 	struct dentry *dentry;
- 	char *tmpname;
 
  	if (chan->is_global)
 		return chan->buf[0];
 
-	tmpname = kzalloc(NAME_MAX + 1, GFP_KERNEL);
- 	if (!tmpname)
- 		goto end;
- 	snprintf(tmpname, NAME_MAX, "%s%d", chan->base_filename, cpu);
-
 	buf = relay_create_buf(chan);
 	if (!buf)
- 		goto free_name;
+		return NULL;
+
+	if (chan->has_base_filename) {
+		dentry = relay_create_buf_file(chan, buf, cpu);
+		if (!dentry)
+			goto free_buf;
+		relay_set_buf_dentry(buf, dentry);
+	}
 
  	buf->cpu = cpu;
  	__relay_reset(buf, 1);
 
-	/* Create file in fs */
- 	dentry = chan->cb->create_buf_file(tmpname, chan->parent, S_IRUSR,
- 					   buf, &chan->is_global);
- 	if (!dentry)
- 		goto free_buf;
-
-	buf->dentry = dentry;
-
  	if(chan->is_global) {
  		chan->buf[0] = buf;
  		buf->cpu = 0;
   	}
 
- 	goto free_name;
+	return buf;
 
 free_buf:
  	relay_destroy_buf(buf);
- 	buf = NULL;
-free_name:
- 	kfree(tmpname);
-end:
-	return buf;
+	return NULL;
 }
 
 /**
@@ -537,8 +555,8 @@ static int __cpuinit relay_hotcpu_callback(struct notifier_block *nb,
 
 /**
  *	relay_open - create a new relay channel
- *	@base_filename: base name of files to create
- *	@parent: dentry of parent directory, %NULL for root directory
+ *	@base_filename: base name of files to create, %NULL for buffering only
+ *	@parent: dentry of parent directory, %NULL for root directory or buffer
  *	@subbuf_size: size of sub-buffers
  *	@n_subbufs: number of sub-buffers
  *	@cb: client callback functions
@@ -560,8 +578,6 @@ struct rchan *relay_open(const char *base_filename,
 {
 	unsigned int i;
 	struct rchan *chan;
-	if (!base_filename)
-		return NULL;
 
 	if (!(subbuf_size && n_subbufs))
 		return NULL;
@@ -576,7 +592,10 @@ struct rchan *relay_open(const char *base_filename,
 	chan->alloc_size = FIX_SIZE(subbuf_size * n_subbufs);
 	chan->parent = parent;
 	chan->private_data = private_data;
-	strlcpy(chan->base_filename, base_filename, NAME_MAX);
+	if (base_filename) {
+		chan->has_base_filename = 1;
+		strlcpy(chan->base_filename, base_filename, NAME_MAX);
+	}
 	setup_callbacks(chan, cb);
 	kref_init(&chan->kref);
 
@@ -604,6 +623,94 @@ free_bufs:
 }
 EXPORT_SYMBOL_GPL(relay_open);
 
+struct rchan_percpu_buf_dispatcher {
+	struct rchan_buf *buf;
+	struct dentry *dentry;
+};
+
+/* Called in atomic context. */
+static void __relay_set_buf_dentry(void *info)
+{
+	struct rchan_percpu_buf_dispatcher *p = info;
+
+	relay_set_buf_dentry(p->buf, p->dentry);
+}
+
+/**
+ *	relay_late_setup_files - triggers file creation
+ *	@chan: channel to operate on
+ *	@base_filename: base name of files to create
+ *	@parent: dentry of parent directory, %NULL for root directory
+ *
+ *	Returns 0 if successful, non-zero otherwise.
+ *
+ *	Use to setup files for a previously buffer-only channel.
+ *	Useful to do early tracing in kernel, before VFS is up, for example.
+ */
+int relay_late_setup_files(struct rchan *chan,
+			   const char *base_filename,
+			   struct dentry *parent)
+{
+	int err = 0;
+	unsigned int i, curr_cpu;
+	unsigned long flags;
+	struct dentry *dentry;
+	struct rchan_percpu_buf_dispatcher disp;
+
+	if (!chan || !base_filename)
+		return -EINVAL;
+
+	strlcpy(chan->base_filename, base_filename, NAME_MAX);
+
+	mutex_lock(&relay_channels_mutex);
+	/* Is chan already set up? */
+	if (unlikely(chan->has_base_filename))
+		return -EEXIST;
+	chan->has_base_filename = 1;
+	chan->parent = parent;
+	curr_cpu = get_cpu();
+	/*
+	 * The CPU hotplug notifier ran before us and created buffers with
+	 * no files associated. So it's safe to call relay_setup_buf_file()
+	 * on all currently online CPUs.
+	 */
+	for_each_online_cpu(i) {
+		if (unlikely(!chan->buf[i])) {
+			printk(KERN_ERR "relay_late_setup_files: CPU %u "
+					"has no buffer, it must have!\n", i);
+			BUG();
+			err = -EINVAL;
+			break;
+		}
+
+		dentry = relay_create_buf_file(chan, chan->buf[i], i);
+		if (unlikely(!dentry)) {
+			err = -EINVAL;
+			break;
+		}
+
+		if (curr_cpu == i) {
+			local_irq_save(flags);
+			relay_set_buf_dentry(chan->buf[i], dentry);
+			local_irq_restore(flags);
+		} else {
+			disp.buf = chan->buf[i];
+			disp.dentry = dentry;
+			smp_mb();
+			/* relay_channels_mutex must be held, so wait. */
+			err = smp_call_function_single(i,
+						       __relay_set_buf_dentry,
+						       &disp, 1);
+		}
+		if (unlikely(err))
+			break;
+	}
+	put_cpu();
+	mutex_unlock(&relay_channels_mutex);
+
+	return err;
+}
+
 /**
  *	relay_switch_subbuf - switch to a new sub-buffer
  *	@buf: channel buffer
@@ -627,8 +734,13 @@ size_t relay_switch_subbuf(struct rchan_buf *buf, size_t length)
 		old_subbuf = buf->subbufs_produced % buf->chan->n_subbufs;
 		buf->padding[old_subbuf] = buf->prev_padding;
 		buf->subbufs_produced++;
-		buf->dentry->d_inode->i_size += buf->chan->subbuf_size -
-			buf->padding[old_subbuf];
+		if (buf->dentry)
+			buf->dentry->d_inode->i_size +=
+				buf->chan->subbuf_size -
+				buf->padding[old_subbuf];
+		else
+			buf->early_bytes += buf->chan->subbuf_size -
+					    buf->padding[old_subbuf];
 		smp_mb();
 		if (waitqueue_active(&buf->read_wait))
 			/*
@@ -1237,4 +1349,4 @@ static __init int relay_init(void)
 	return 0;
 }
 
-module_init(relay_init);
+early_initcall(relay_init);
-- 
cgit v1.2.3


From 080ccd4573607a930367c2128fc709814b2ade5d Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Fri, 25 Jul 2008 19:45:13 -0700
Subject: include/linux/aio.h: removed duplicated include

Removed duplicated include <linux/uio.h> in include/linux/aio.h

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/aio.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/linux/aio.h b/include/linux/aio.h
index b51ddd28444..09b276c3522 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -7,7 +7,6 @@
 #include <linux/uio.h>
 
 #include <asm/atomic.h>
-#include <linux/uio.h>
 
 #define AIO_MAXSEGS		4
 #define AIO_KIOGRP_NR_ATOMIC	8
-- 
cgit v1.2.3


From a14e4b572b0ee5c6dbe4aceb83d00b2c969324e9 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Fri, 25 Jul 2008 19:45:14 -0700
Subject: omfs: add filesystem documentation

These patches add the Optimized MPEG Filesystem, a proprietary filesystem used
by the embedded devices Rio Karma and ReplayTV, which are no longer
manufactured.  This filesystem module enables people to access files on these
devices.

This patch:

OMFS is a proprietary filesystem created for the ReplayTV and also used by the
Rio Karma.  It uses hash tables with unordered, unbounded lists in each bucket
for directories, extents for data blocks, 64-bit addressing for blocks, with
up to 8K blocks (only 2K of a given block is ever used for metadata, so the FS
still works with 4K pages).

Document the filesystem usage and structures.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/omfs.txt | 106 +++++++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)
 create mode 100644 Documentation/filesystems/omfs.txt

diff --git a/Documentation/filesystems/omfs.txt b/Documentation/filesystems/omfs.txt
new file mode 100644
index 00000000000..1d0d41ff5c6
--- /dev/null
+++ b/Documentation/filesystems/omfs.txt
@@ -0,0 +1,106 @@
+Optimized MPEG Filesystem (OMFS)
+
+Overview
+========
+
+OMFS is a filesystem created by SonicBlue for use in the ReplayTV DVR
+and Rio Karma MP3 player.  The filesystem is extent-based, utilizing
+block sizes from 2k to 8k, with hash-based directories.  This
+filesystem driver may be used to read and write disks from these
+devices.
+
+Note, it is not recommended that this FS be used in place of a general
+filesystem for your own streaming media device.  Native Linux filesystems
+will likely perform better.
+
+More information is available at:
+
+    http://linux-karma.sf.net/
+
+Various utilities, including mkomfs and omfsck, are included with
+omfsprogs, available at:
+
+    http://bobcopeland.com/karma/
+
+Instructions are included in its README.
+
+Options
+=======
+
+OMFS supports the following mount-time options:
+
+    uid=n        - make all files owned by specified user
+    gid=n        - make all files owned by specified group
+    umask=xxx    - set permission umask to xxx
+    fmask=xxx    - set umask to xxx for files
+    dmask=xxx    - set umask to xxx for directories
+
+Disk format
+===========
+
+OMFS discriminates between "sysblocks" and normal data blocks.  The sysblock
+group consists of super block information, file metadata, directory structures,
+and extents.  Each sysblock has a header containing CRCs of the entire
+sysblock, and may be mirrored in successive blocks on the disk.  A sysblock may
+have a smaller size than a data block, but since they are both addressed by the
+same 64-bit block number, any remaining space in the smaller sysblock is
+unused.
+
+Sysblock header information:
+
+struct omfs_header {
+        __be64 h_self;                  /* FS block where this is located */
+        __be32 h_body_size;             /* size of useful data after header */
+        __be16 h_crc;                   /* crc-ccitt of body_size bytes */
+        char h_fill1[2];
+        u8 h_version;                   /* version, always 1 */
+        char h_type;                    /* OMFS_INODE_X */
+        u8 h_magic;                     /* OMFS_IMAGIC */
+        u8 h_check_xor;                 /* XOR of header bytes before this */
+        __be32 h_fill2;
+};
+
+Files and directories are both represented by omfs_inode:
+
+struct omfs_inode {
+        struct omfs_header i_head;      /* header */
+        __be64 i_parent;                /* parent containing this inode */
+        __be64 i_sibling;               /* next inode in hash bucket */
+        __be64 i_ctime;                 /* ctime, in milliseconds */
+        char i_fill1[35];
+        char i_type;                    /* OMFS_[DIR,FILE] */
+        __be32 i_fill2;
+        char i_fill3[64];
+        char i_name[OMFS_NAMELEN];      /* filename */
+        __be64 i_size;                  /* size of file, in bytes */
+};
+
+Directories in OMFS are implemented as a large hash table.  Filenames are
+hashed then prepended into the bucket list beginning at OMFS_DIR_START.
+Lookup requires hashing the filename, then seeking across i_sibling pointers
+until a match is found on i_name.  Empty buckets are represented by block
+pointers with all-1s (~0).
+
+A file is an omfs_inode structure followed by an extent table beginning at
+OMFS_EXTENT_START:
+
+struct omfs_extent_entry {
+        __be64 e_cluster;               /* start location of a set of blocks */
+        __be64 e_blocks;                /* number of blocks after e_cluster */
+};
+
+struct omfs_extent {
+        __be64 e_next;                  /* next extent table location */
+        __be32 e_extent_count;          /* total # extents in this table */
+        __be32 e_fill;
+        struct omfs_extent_entry e_entry;       /* start of extent entries */
+};
+
+Each extent holds the block offset followed by number of blocks allocated to
+the extent.  The final extent in each table is a terminator with e_cluster
+being ~0 and e_blocks being ones'-complement of the total number of blocks
+in the table.
+
+If this table overflows, a continuation inode is written and pointed to by
+e_next.  These have a header but lack the rest of the inode structure.
+
-- 
cgit v1.2.3


From 1b002d7b173ae7cc15ed90d3c07f6d106babc510 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Fri, 25 Jul 2008 19:45:15 -0700
Subject: omfs: define filesystem structures

Add header files containing OMFS on-disk and memory structures.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/omfs/omfs.h    | 67 ++++++++++++++++++++++++++++++++++++++++++++++
 fs/omfs/omfs_fs.h | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 147 insertions(+)
 create mode 100644 fs/omfs/omfs.h
 create mode 100644 fs/omfs/omfs_fs.h

diff --git a/fs/omfs/omfs.h b/fs/omfs/omfs.h
new file mode 100644
index 00000000000..2bc0f067040
--- /dev/null
+++ b/fs/omfs/omfs.h
@@ -0,0 +1,67 @@
+#ifndef _OMFS_H
+#define _OMFS_H
+
+#include <linux/module.h>
+#include <linux/fs.h>
+
+#include "omfs_fs.h"
+
+/* In-memory structures */
+struct omfs_sb_info {
+	u64 s_num_blocks;
+	u64 s_bitmap_ino;
+	u64 s_root_ino;
+	u32 s_blocksize;
+	u32 s_mirrors;
+	u32 s_sys_blocksize;
+	u32 s_clustersize;
+	int s_block_shift;
+	unsigned long **s_imap;
+	int s_imap_size;
+	struct mutex s_bitmap_lock;
+	int s_uid;
+	int s_gid;
+	int s_dmask;
+	int s_fmask;
+};
+
+/* convert a cluster number to a scaled block number */
+static inline sector_t clus_to_blk(struct omfs_sb_info *sbi, sector_t block)
+{
+	return block << sbi->s_block_shift;
+}
+
+static inline struct omfs_sb_info *OMFS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+/* bitmap.c */
+extern unsigned long omfs_count_free(struct super_block *sb);
+extern int omfs_allocate_block(struct super_block *sb, u64 block);
+extern int omfs_allocate_range(struct super_block *sb, int min_request,
+			int max_request, u64 *return_block, int *return_size);
+extern int omfs_clear_range(struct super_block *sb, u64 block, int count);
+
+/* dir.c */
+extern struct file_operations omfs_dir_operations;
+extern struct inode_operations omfs_dir_inops;
+extern int omfs_make_empty(struct inode *inode, struct super_block *sb);
+extern int omfs_is_bad(struct omfs_sb_info *sbi, struct omfs_header *header,
+			u64 fsblock);
+
+/* file.c */
+extern struct file_operations omfs_file_operations;
+extern struct inode_operations omfs_file_inops;
+extern struct address_space_operations omfs_aops;
+extern void omfs_make_empty_table(struct buffer_head *bh, int offset);
+extern int omfs_shrink_inode(struct inode *inode);
+
+/* inode.c */
+extern struct inode *omfs_iget(struct super_block *sb, ino_t inode);
+extern struct inode *omfs_new_inode(struct inode *dir, int mode);
+extern int omfs_reserve_block(struct super_block *sb, sector_t block);
+extern int omfs_find_empty_block(struct super_block *sb, int mode, ino_t *ino);
+extern int omfs_sync_inode(struct inode *inode);
+
+#endif
diff --git a/fs/omfs/omfs_fs.h b/fs/omfs/omfs_fs.h
new file mode 100644
index 00000000000..12cca245d6e
--- /dev/null
+++ b/fs/omfs/omfs_fs.h
@@ -0,0 +1,80 @@
+#ifndef _OMFS_FS_H
+#define _OMFS_FS_H
+
+/* OMFS On-disk structures */
+
+#define OMFS_MAGIC 0xC2993D87
+#define OMFS_IMAGIC 0xD2
+
+#define OMFS_DIR 'D'
+#define OMFS_FILE 'F'
+#define OMFS_INODE_NORMAL 'e'
+#define OMFS_INODE_CONTINUATION 'c'
+#define OMFS_INODE_SYSTEM 's'
+#define OMFS_NAMELEN 256
+#define OMFS_DIR_START 0x1b8
+#define OMFS_EXTENT_START 0x1d0
+#define OMFS_EXTENT_CONT 0x40
+#define OMFS_XOR_COUNT 19
+#define OMFS_MAX_BLOCK_SIZE 8192
+
+struct omfs_super_block {
+	char s_fill1[256];
+	__be64 s_root_block;		/* block number of omfs_root_block */
+	__be64 s_num_blocks;		/* total number of FS blocks */
+	__be32 s_magic;			/* OMFS_MAGIC */
+	__be32 s_blocksize;		/* size of a block */
+	__be32 s_mirrors;		/* # of mirrors of system blocks */
+	__be32 s_sys_blocksize;		/* size of non-data blocks */
+};
+
+struct omfs_header {
+	__be64 h_self;			/* FS block where this is located */
+	__be32 h_body_size;		/* size of useful data after header */
+	__be16 h_crc;			/* crc-ccitt of body_size bytes */
+	char h_fill1[2];
+	u8 h_version;			/* version, always 1 */
+	char h_type;			/* OMFS_INODE_X */
+	u8 h_magic;			/* OMFS_IMAGIC */
+	u8 h_check_xor;			/* XOR of header bytes before this */
+	__be32 h_fill2;
+};
+
+struct omfs_root_block {
+	struct omfs_header r_head;	/* header */
+	__be64 r_fill1;
+	__be64 r_num_blocks;		/* total number of FS blocks */
+	__be64 r_root_dir;		/* block # of root directory */
+	__be64 r_bitmap;		/* block # of free space bitmap */
+	__be32 r_blocksize;		/* size of a block */
+	__be32 r_clustersize;		/* size allocated for data blocks */
+	__be64 r_mirrors;		/* # of mirrors of system blocks */
+	char r_name[OMFS_NAMELEN];	/* partition label */
+};
+
+struct omfs_inode {
+	struct omfs_header i_head;	/* header */
+	__be64 i_parent;		/* parent containing this inode */
+	__be64 i_sibling;		/* next inode in hash bucket */
+	__be64 i_ctime;			/* ctime, in milliseconds */
+	char i_fill1[35];
+	char i_type;			/* OMFS_[DIR,FILE] */
+	__be32 i_fill2;
+	char i_fill3[64];
+	char i_name[OMFS_NAMELEN];	/* filename */
+	__be64 i_size;			/* size of file, in bytes */
+};
+
+struct omfs_extent_entry {
+	__be64 e_cluster;		/* start location of a set of blocks */
+	__be64 e_blocks;		/* number of blocks after e_cluster */
+};
+
+struct omfs_extent {
+	__be64 e_next;			/* next extent table location */
+	__be32 e_extent_count;		/* total # extents in this table */
+	__be32 e_fill;
+	struct omfs_extent_entry e_entry;	/* start of extent entries */
+};
+
+#endif
-- 
cgit v1.2.3


From 555e3775ced1d05203934fc6529bbf0560dd8733 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Fri, 25 Jul 2008 19:45:15 -0700
Subject: omfs: add inode routines

Add basic superblock and inode handling routines for OMFS

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/omfs/inode.c | 553 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 553 insertions(+)
 create mode 100644 fs/omfs/inode.c

diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
new file mode 100644
index 00000000000..d865f553543
--- /dev/null
+++ b/fs/omfs/inode.c
@@ -0,0 +1,553 @@
+/*
+ * Optimized MPEG FS - inode and super operations.
+ * Copyright (C) 2006 Bob Copeland <me@bobcopeland.com>
+ * Released under GPL v2.
+ */
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/vfs.h>
+#include <linux/parser.h>
+#include <linux/buffer_head.h>
+#include <linux/vmalloc.h>
+#include <linux/crc-itu-t.h>
+#include "omfs.h"
+
+MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>");
+MODULE_DESCRIPTION("OMFS (ReplayTV/Karma) Filesystem for Linux");
+MODULE_LICENSE("GPL");
+
+struct inode *omfs_new_inode(struct inode *dir, int mode)
+{
+	struct inode *inode;
+	u64 new_block;
+	int err;
+	int len;
+	struct omfs_sb_info *sbi = OMFS_SB(dir->i_sb);
+
+	inode = new_inode(dir->i_sb);
+	if (!inode)
+		return ERR_PTR(-ENOMEM);
+
+	err = omfs_allocate_range(dir->i_sb, sbi->s_mirrors, sbi->s_mirrors,
+			&new_block, &len);
+	if (err)
+		goto fail;
+
+	inode->i_ino = new_block;
+	inode->i_mode = mode;
+	inode->i_uid = current->fsuid;
+	inode->i_gid = current->fsgid;
+	inode->i_blocks = 0;
+	inode->i_mapping->a_ops = &omfs_aops;
+
+	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+	switch (mode & S_IFMT) {
+	case S_IFDIR:
+		inode->i_op = &omfs_dir_inops;
+		inode->i_fop = &omfs_dir_operations;
+		inode->i_size = sbi->s_sys_blocksize;
+		inc_nlink(inode);
+		break;
+	case S_IFREG:
+		inode->i_op = &omfs_file_inops;
+		inode->i_fop = &omfs_file_operations;
+		inode->i_size = 0;
+		break;
+	}
+
+	insert_inode_hash(inode);
+	mark_inode_dirty(inode);
+	return inode;
+fail:
+	make_bad_inode(inode);
+	iput(inode);
+	return ERR_PTR(err);
+}
+
+/*
+ * Update the header checksums for a dirty inode based on its contents.
+ * Caller is expected to hold the buffer head underlying oi and mark it
+ * dirty.
+ */
+static void omfs_update_checksums(struct omfs_inode *oi)
+{
+	int xor, i, ofs = 0, count;
+	u16 crc = 0;
+	unsigned char *ptr = (unsigned char *) oi;
+
+	count = be32_to_cpu(oi->i_head.h_body_size);
+	ofs = sizeof(struct omfs_header);
+
+	crc = crc_itu_t(crc, ptr + ofs, count);
+	oi->i_head.h_crc = cpu_to_be16(crc);
+
+	xor = ptr[0];
+	for (i = 1; i < OMFS_XOR_COUNT; i++)
+		xor ^= ptr[i];
+
+	oi->i_head.h_check_xor = xor;
+}
+
+static int omfs_write_inode(struct inode *inode, int wait)
+{
+	struct omfs_inode *oi;
+	struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
+	struct buffer_head *bh, *bh2;
+	unsigned int block;
+	u64 ctime;
+	int i;
+	int ret = -EIO;
+	int sync_failed = 0;
+
+	/* get current inode since we may have written sibling ptrs etc. */
+	block = clus_to_blk(sbi, inode->i_ino);
+	bh = sb_bread(inode->i_sb, block);
+	if (!bh)
+		goto out;
+
+	oi = (struct omfs_inode *) bh->b_data;
+
+	oi->i_head.h_self = cpu_to_be64(inode->i_ino);
+	if (S_ISDIR(inode->i_mode))
+		oi->i_type = OMFS_DIR;
+	else if (S_ISREG(inode->i_mode))
+		oi->i_type = OMFS_FILE;
+	else {
+		printk(KERN_WARNING "omfs: unknown file type: %d\n",
+			inode->i_mode);
+		goto out_brelse;
+	}
+
+	oi->i_head.h_body_size = cpu_to_be32(sbi->s_sys_blocksize -
+		sizeof(struct omfs_header));
+	oi->i_head.h_version = 1;
+	oi->i_head.h_type = OMFS_INODE_NORMAL;
+	oi->i_head.h_magic = OMFS_IMAGIC;
+	oi->i_size = cpu_to_be64(inode->i_size);
+
+	ctime = inode->i_ctime.tv_sec * 1000LL +
+		((inode->i_ctime.tv_nsec + 999)/1000);
+	oi->i_ctime = cpu_to_be64(ctime);
+
+	omfs_update_checksums(oi);
+
+	mark_buffer_dirty(bh);
+	if (wait) {
+		sync_dirty_buffer(bh);
+		if (buffer_req(bh) && !buffer_uptodate(bh))
+			sync_failed = 1;
+	}
+
+	/* if mirroring writes, copy to next fsblock */
+	for (i = 1; i < sbi->s_mirrors; i++) {
+		bh2 = sb_bread(inode->i_sb, block + i *
+			(sbi->s_blocksize / sbi->s_sys_blocksize));
+		if (!bh2)
+			goto out_brelse;
+
+		memcpy(bh2->b_data, bh->b_data, bh->b_size);
+		mark_buffer_dirty(bh2);
+		if (wait) {
+			sync_dirty_buffer(bh2);
+			if (buffer_req(bh2) && !buffer_uptodate(bh2))
+				sync_failed = 1;
+		}
+		brelse(bh2);
+	}
+	ret = (sync_failed) ? -EIO : 0;
+out_brelse:
+	brelse(bh);
+out:
+	return ret;
+}
+
+int omfs_sync_inode(struct inode *inode)
+{
+	return omfs_write_inode(inode, 1);
+}
+
+/*
+ * called when an entry is deleted, need to clear the bits in the
+ * bitmaps.
+ */
+static void omfs_delete_inode(struct inode *inode)
+{
+	truncate_inode_pages(&inode->i_data, 0);
+
+	if (S_ISREG(inode->i_mode)) {
+		inode->i_size = 0;
+		omfs_shrink_inode(inode);
+	}
+
+	omfs_clear_range(inode->i_sb, inode->i_ino, 2);
+	clear_inode(inode);
+}
+
+struct inode *omfs_iget(struct super_block *sb, ino_t ino)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	struct omfs_inode *oi;
+	struct buffer_head *bh;
+	unsigned int block;
+	u64 ctime;
+	unsigned long nsecs;
+	struct inode *inode;
+
+	inode = iget_locked(sb, ino);
+	if (!inode)
+		return ERR_PTR(-ENOMEM);
+	if (!(inode->i_state & I_NEW))
+		return inode;
+
+	block = clus_to_blk(sbi, ino);
+	bh = sb_bread(inode->i_sb, block);
+	if (!bh)
+		goto iget_failed;
+
+	oi = (struct omfs_inode *)bh->b_data;
+
+	/* check self */
+	if (ino != be64_to_cpu(oi->i_head.h_self))
+		goto fail_bh;
+
+	inode->i_uid = sbi->s_uid;
+	inode->i_gid = sbi->s_gid;
+
+	ctime = be64_to_cpu(oi->i_ctime);
+	nsecs = do_div(ctime, 1000) * 1000L;
+
+	inode->i_atime.tv_sec = ctime;
+	inode->i_mtime.tv_sec = ctime;
+	inode->i_ctime.tv_sec = ctime;
+	inode->i_atime.tv_nsec = nsecs;
+	inode->i_mtime.tv_nsec = nsecs;
+	inode->i_ctime.tv_nsec = nsecs;
+
+	inode->i_mapping->a_ops = &omfs_aops;
+
+	switch (oi->i_type) {
+	case OMFS_DIR:
+		inode->i_mode = S_IFDIR | (S_IRWXUGO & ~sbi->s_dmask);
+		inode->i_op = &omfs_dir_inops;
+		inode->i_fop = &omfs_dir_operations;
+		inode->i_size = be32_to_cpu(oi->i_head.h_body_size) +
+			sizeof(struct omfs_header);
+		inc_nlink(inode);
+		break;
+	case OMFS_FILE:
+		inode->i_mode = S_IFREG | (S_IRWXUGO & ~sbi->s_fmask);
+		inode->i_fop = &omfs_file_operations;
+		inode->i_size = be64_to_cpu(oi->i_size);
+		break;
+	}
+	brelse(bh);
+	unlock_new_inode(inode);
+	return inode;
+fail_bh:
+	brelse(bh);
+iget_failed:
+	iget_failed(inode);
+	return ERR_PTR(-EIO);
+}
+
+static void omfs_put_super(struct super_block *sb)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	kfree(sbi->s_imap);
+	kfree(sbi);
+	sb->s_fs_info = NULL;
+}
+
+static int omfs_statfs(struct dentry *dentry, struct kstatfs *buf)
+{
+	struct super_block *s = dentry->d_sb;
+	struct omfs_sb_info *sbi = OMFS_SB(s);
+	buf->f_type = OMFS_MAGIC;
+	buf->f_bsize = sbi->s_blocksize;
+	buf->f_blocks = sbi->s_num_blocks;
+	buf->f_files = sbi->s_num_blocks;
+	buf->f_namelen = OMFS_NAMELEN;
+
+	buf->f_bfree = buf->f_bavail = buf->f_ffree =
+		omfs_count_free(s);
+	return 0;
+}
+
+static struct super_operations omfs_sops = {
+	.write_inode	= omfs_write_inode,
+	.delete_inode	= omfs_delete_inode,
+	.put_super	= omfs_put_super,
+	.statfs		= omfs_statfs,
+	.show_options	= generic_show_options,
+};
+
+/*
+ * For Rio Karma, there is an on-disk free bitmap whose location is
+ * stored in the root block.  For ReplayTV, there is no such free bitmap
+ * so we have to walk the tree.  Both inodes and file data are allocated
+ * from the same map.  This array can be big (300k) so we allocate
+ * in units of the blocksize.
+ */
+static int omfs_get_imap(struct super_block *sb)
+{
+	int bitmap_size;
+	int array_size;
+	int count;
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	struct buffer_head *bh;
+	unsigned long **ptr;
+	sector_t block;
+
+	bitmap_size = DIV_ROUND_UP(sbi->s_num_blocks, 8);
+	array_size = DIV_ROUND_UP(bitmap_size, sb->s_blocksize);
+
+	if (sbi->s_bitmap_ino == ~0ULL)
+		goto out;
+
+	sbi->s_imap_size = array_size;
+	sbi->s_imap = kzalloc(array_size * sizeof(unsigned long *), GFP_KERNEL);
+	if (!sbi->s_imap)
+		goto nomem;
+
+	block = clus_to_blk(sbi, sbi->s_bitmap_ino);
+	ptr = sbi->s_imap;
+	for (count = bitmap_size; count > 0; count -= sb->s_blocksize) {
+		bh = sb_bread(sb, block++);
+		if (!bh)
+			goto nomem_free;
+		*ptr = kmalloc(sb->s_blocksize, GFP_KERNEL);
+		if (!*ptr) {
+			brelse(bh);
+			goto nomem_free;
+		}
+		memcpy(*ptr, bh->b_data, sb->s_blocksize);
+		if (count < sb->s_blocksize)
+			memset((void *)*ptr + count, 0xff,
+				sb->s_blocksize - count);
+		brelse(bh);
+		ptr++;
+	}
+out:
+	return 0;
+
+nomem_free:
+	for (count = 0; count < array_size; count++)
+		kfree(sbi->s_imap[count]);
+
+	kfree(sbi->s_imap);
+nomem:
+	sbi->s_imap = NULL;
+	sbi->s_imap_size = 0;
+	return -ENOMEM;
+}
+
+enum {
+	Opt_uid, Opt_gid, Opt_umask, Opt_dmask, Opt_fmask
+};
+
+static match_table_t tokens = {
+	{Opt_uid, "uid=%u"},
+	{Opt_gid, "gid=%u"},
+	{Opt_umask, "umask=%o"},
+	{Opt_dmask, "dmask=%o"},
+	{Opt_fmask, "fmask=%o"},
+};
+
+static int parse_options(char *options, struct omfs_sb_info *sbi)
+{
+	char *p;
+	substring_t args[MAX_OPT_ARGS];
+	int option;
+
+	if (!options)
+		return 1;
+
+	while ((p = strsep(&options, ",")) != NULL) {
+		int token;
+		if (!*p)
+			continue;
+
+		token = match_token(p, tokens, args);
+		switch (token) {
+		case Opt_uid:
+			if (match_int(&args[0], &option))
+				return 0;
+			sbi->s_uid = option;
+			break;
+		case Opt_gid:
+			if (match_int(&args[0], &option))
+				return 0;
+			sbi->s_gid = option;
+			break;
+		case Opt_umask:
+			if (match_octal(&args[0], &option))
+				return 0;
+			sbi->s_fmask = sbi->s_dmask = option;
+			break;
+		case Opt_dmask:
+			if (match_octal(&args[0], &option))
+				return 0;
+			sbi->s_dmask = option;
+			break;
+		case Opt_fmask:
+			if (match_octal(&args[0], &option))
+				return 0;
+			sbi->s_fmask = option;
+			break;
+		default:
+			return 0;
+		}
+	}
+	return 1;
+}
+
+static int omfs_fill_super(struct super_block *sb, void *data, int silent)
+{
+	struct buffer_head *bh, *bh2;
+	struct omfs_super_block *omfs_sb;
+	struct omfs_root_block *omfs_rb;
+	struct omfs_sb_info *sbi;
+	struct inode *root;
+	sector_t start;
+	int ret = -EINVAL;
+
+	save_mount_options(sb, (char *) data);
+
+	sbi = kzalloc(sizeof(struct omfs_sb_info), GFP_KERNEL);
+	if (!sbi)
+		return -ENOMEM;
+
+	sb->s_fs_info = sbi;
+
+	sbi->s_uid = current->uid;
+	sbi->s_gid = current->gid;
+	sbi->s_dmask = sbi->s_fmask = current->fs->umask;
+
+	if (!parse_options((char *) data, sbi))
+		goto end;
+
+	sb->s_maxbytes = 0xffffffff;
+
+	sb_set_blocksize(sb, 0x200);
+
+	bh = sb_bread(sb, 0);
+	if (!bh)
+		goto end;
+
+	omfs_sb = (struct omfs_super_block *)bh->b_data;
+
+	if (omfs_sb->s_magic != cpu_to_be32(OMFS_MAGIC)) {
+		if (!silent)
+			printk(KERN_ERR "omfs: Invalid superblock (%x)\n",
+				   omfs_sb->s_magic);
+		goto out_brelse_bh;
+	}
+	sb->s_magic = OMFS_MAGIC;
+
+	sbi->s_num_blocks = be64_to_cpu(omfs_sb->s_num_blocks);
+	sbi->s_blocksize = be32_to_cpu(omfs_sb->s_blocksize);
+	sbi->s_mirrors = be32_to_cpu(omfs_sb->s_mirrors);
+	sbi->s_root_ino = be64_to_cpu(omfs_sb->s_root_block);
+	sbi->s_sys_blocksize = be32_to_cpu(omfs_sb->s_sys_blocksize);
+	mutex_init(&sbi->s_bitmap_lock);
+
+	if (sbi->s_sys_blocksize > PAGE_SIZE) {
+		printk(KERN_ERR "omfs: sysblock size (%d) is out of range\n",
+			sbi->s_sys_blocksize);
+		goto out_brelse_bh;
+	}
+
+	if (sbi->s_blocksize < sbi->s_sys_blocksize ||
+	    sbi->s_blocksize > OMFS_MAX_BLOCK_SIZE) {
+		printk(KERN_ERR "omfs: block size (%d) is out of range\n",
+			sbi->s_blocksize);
+		goto out_brelse_bh;
+	}
+
+	/*
+	 * Use sys_blocksize as the fs block since it is smaller than a
+	 * page while the fs blocksize can be larger.
+	 */
+	sb_set_blocksize(sb, sbi->s_sys_blocksize);
+
+	/*
+	 * ...and the difference goes into a shift.  sys_blocksize is always
+	 * a power of two factor of blocksize.
+	 */
+	sbi->s_block_shift = get_bitmask_order(sbi->s_blocksize) -
+		get_bitmask_order(sbi->s_sys_blocksize);
+
+	start = clus_to_blk(sbi, be64_to_cpu(omfs_sb->s_root_block));
+	bh2 = sb_bread(sb, start);
+	if (!bh2)
+		goto out_brelse_bh;
+
+	omfs_rb = (struct omfs_root_block *)bh2->b_data;
+
+	sbi->s_bitmap_ino = be64_to_cpu(omfs_rb->r_bitmap);
+	sbi->s_clustersize = be32_to_cpu(omfs_rb->r_clustersize);
+
+	if (sbi->s_num_blocks != be64_to_cpu(omfs_rb->r_num_blocks)) {
+		printk(KERN_ERR "omfs: block count discrepancy between "
+			"super and root blocks (%llx, %llx)\n",
+			sbi->s_num_blocks, be64_to_cpu(omfs_rb->r_num_blocks));
+		goto out_brelse_bh2;
+	}
+
+	ret = omfs_get_imap(sb);
+	if (ret)
+		goto out_brelse_bh2;
+
+	sb->s_op = &omfs_sops;
+
+	root = omfs_iget(sb, be64_to_cpu(omfs_rb->r_root_dir));
+	if (IS_ERR(root)) {
+		ret = PTR_ERR(root);
+		goto out_brelse_bh2;
+	}
+
+	sb->s_root = d_alloc_root(root);
+	if (!sb->s_root) {
+		iput(root);
+		goto out_brelse_bh2;
+	}
+	printk(KERN_DEBUG "omfs: Mounted volume %s\n", omfs_rb->r_name);
+
+	ret = 0;
+out_brelse_bh2:
+	brelse(bh2);
+out_brelse_bh:
+	brelse(bh);
+end:
+	return ret;
+}
+
+static int omfs_get_sb(struct file_system_type *fs_type,
+			int flags, const char *dev_name,
+			void *data, struct vfsmount *m)
+{
+	return get_sb_bdev(fs_type, flags, dev_name, data, omfs_fill_super, m);
+}
+
+static struct file_system_type omfs_fs_type = {
+	.owner = THIS_MODULE,
+	.name = "omfs",
+	.get_sb = omfs_get_sb,
+	.kill_sb = kill_block_super,
+	.fs_flags = FS_REQUIRES_DEV,
+};
+
+static int __init init_omfs_fs(void)
+{
+	return register_filesystem(&omfs_fs_type);
+}
+
+static void __exit exit_omfs_fs(void)
+{
+	unregister_filesystem(&omfs_fs_type);
+}
+
+module_init(init_omfs_fs);
+module_exit(exit_omfs_fs);
-- 
cgit v1.2.3


From a3ab7155ea21aadc8a4d5687e91b3d876973185e Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Fri, 25 Jul 2008 19:45:16 -0700
Subject: omfs: add directory routines

Add lookup and directory management routines for OMFS.  The filesystem uses
hashing based on the filename and stores collisions, unordered, in siblings
of files' inode structures.  To support telldir, the current position in
the hash table is encoded in fpos.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/omfs/dir.c | 504 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 504 insertions(+)
 create mode 100644 fs/omfs/dir.c

diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
new file mode 100644
index 00000000000..05a5bc31e4b
--- /dev/null
+++ b/fs/omfs/dir.c
@@ -0,0 +1,504 @@
+/*
+ * OMFS (as used by RIO Karma) directory operations.
+ * Copyright (C) 2005 Bob Copeland <me@bobcopeland.com>
+ * Released under GPL v2.
+ */
+
+#include <linux/fs.h>
+#include <linux/ctype.h>
+#include <linux/buffer_head.h>
+#include "omfs.h"
+
+static int omfs_hash(const char *name, int namelen, int mod)
+{
+	int i, hash = 0;
+	for (i = 0; i < namelen; i++)
+		hash ^= tolower(name[i]) << (i % 24);
+	return hash % mod;
+}
+
+/*
+ * Finds the bucket for a given name and reads the containing block;
+ * *ofs is set to the offset of the first list entry.
+ */
+static struct buffer_head *omfs_get_bucket(struct inode *dir,
+		const char *name, int namelen, int *ofs)
+{
+	int nbuckets = (dir->i_size - OMFS_DIR_START)/8;
+	int block = clus_to_blk(OMFS_SB(dir->i_sb), dir->i_ino);
+	int bucket = omfs_hash(name, namelen, nbuckets);
+
+	*ofs = OMFS_DIR_START + bucket * 8;
+	return sb_bread(dir->i_sb, block);
+}
+
+static struct buffer_head *omfs_scan_list(struct inode *dir, u64 block,
+				const char *name, int namelen,
+				u64 *prev_block)
+{
+	struct buffer_head *bh;
+	struct omfs_inode *oi;
+	int err = -ENOENT;
+	*prev_block = ~0;
+
+	while (block != ~0) {
+		bh = sb_bread(dir->i_sb,
+			clus_to_blk(OMFS_SB(dir->i_sb), block));
+		if (!bh) {
+			err = -EIO;
+			goto err;
+		}
+
+		oi = (struct omfs_inode *) bh->b_data;
+		if (omfs_is_bad(OMFS_SB(dir->i_sb), &oi->i_head, block)) {
+			brelse(bh);
+			goto err;
+		}
+
+		if (strncmp(oi->i_name, name, namelen) == 0)
+			return bh;
+
+		*prev_block = block;
+		block = be64_to_cpu(oi->i_sibling);
+		brelse(bh);
+	}
+err:
+	return ERR_PTR(err);
+}
+
+static struct buffer_head *omfs_find_entry(struct inode *dir,
+					   const char *name, int namelen)
+{
+	struct buffer_head *bh;
+	int ofs;
+	u64 block, dummy;
+
+	bh = omfs_get_bucket(dir, name, namelen, &ofs);
+	if (!bh)
+		return ERR_PTR(-EIO);
+
+	block = be64_to_cpu(*((__be64 *) &bh->b_data[ofs]));
+	brelse(bh);
+
+	return omfs_scan_list(dir, block, name, namelen, &dummy);
+}
+
+int omfs_make_empty(struct inode *inode, struct super_block *sb)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int block = clus_to_blk(sbi, inode->i_ino);
+	struct buffer_head *bh;
+	struct omfs_inode *oi;
+
+	bh = sb_bread(sb, block);
+	if (!bh)
+		return -ENOMEM;
+
+	memset(bh->b_data, 0, sizeof(struct omfs_inode));
+
+	if (inode->i_mode & S_IFDIR) {
+		memset(&bh->b_data[OMFS_DIR_START], 0xff,
+			sbi->s_sys_blocksize - OMFS_DIR_START);
+	} else
+		omfs_make_empty_table(bh, OMFS_EXTENT_START);
+
+	oi = (struct omfs_inode *) bh->b_data;
+	oi->i_head.h_self = cpu_to_be64(inode->i_ino);
+	oi->i_sibling = ~0ULL;
+
+	mark_buffer_dirty(bh);
+	brelse(bh);
+	return 0;
+}
+
+static int omfs_add_link(struct dentry *dentry, struct inode *inode)
+{
+	struct inode *dir = dentry->d_parent->d_inode;
+	const char *name = dentry->d_name.name;
+	int namelen = dentry->d_name.len;
+	struct omfs_inode *oi;
+	struct buffer_head *bh;
+	u64 block;
+	__be64 *entry;
+	int ofs;
+
+	/* just prepend to head of queue in proper bucket */
+	bh = omfs_get_bucket(dir, name, namelen, &ofs);
+	if (!bh)
+		goto out;
+
+	entry = (__be64 *) &bh->b_data[ofs];
+	block = be64_to_cpu(*entry);
+	*entry = cpu_to_be64(inode->i_ino);
+	mark_buffer_dirty(bh);
+	brelse(bh);
+
+	/* now set the sibling and parent pointers on the new inode */
+	bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb), inode->i_ino));
+	if (!bh)
+		goto out;
+
+	oi = (struct omfs_inode *) bh->b_data;
+	memcpy(oi->i_name, name, namelen);
+	memset(oi->i_name + namelen, 0, OMFS_NAMELEN - namelen);
+	oi->i_sibling = cpu_to_be64(block);
+	oi->i_parent = cpu_to_be64(dir->i_ino);
+	mark_buffer_dirty(bh);
+	brelse(bh);
+
+	dir->i_ctime = CURRENT_TIME_SEC;
+
+	/* mark affected inodes dirty to rebuild checksums */
+	mark_inode_dirty(dir);
+	mark_inode_dirty(inode);
+	return 0;
+out:
+	return -ENOMEM;
+}
+
+static int omfs_delete_entry(struct dentry *dentry)
+{
+	struct inode *dir = dentry->d_parent->d_inode;
+	struct inode *dirty;
+	const char *name = dentry->d_name.name;
+	int namelen = dentry->d_name.len;
+	struct omfs_inode *oi;
+	struct buffer_head *bh, *bh2;
+	__be64 *entry, next;
+	u64 block, prev;
+	int ofs;
+	int err = -ENOMEM;
+
+	/* delete the proper node in the bucket's linked list */
+	bh = omfs_get_bucket(dir, name, namelen, &ofs);
+	if (!bh)
+		goto out;
+
+	entry = (__be64 *) &bh->b_data[ofs];
+	block = be64_to_cpu(*entry);
+
+	bh2 = omfs_scan_list(dir, block, name, namelen, &prev);
+	if (IS_ERR(bh2)) {
+		err = PTR_ERR(bh2);
+		goto out_free_bh;
+	}
+
+	oi = (struct omfs_inode *) bh2->b_data;
+	next = oi->i_sibling;
+	brelse(bh2);
+
+	if (prev != ~0) {
+		/* found in middle of list, get list ptr */
+		brelse(bh);
+		bh = sb_bread(dir->i_sb,
+			clus_to_blk(OMFS_SB(dir->i_sb), prev));
+		if (!bh)
+			goto out;
+
+		oi = (struct omfs_inode *) bh->b_data;
+		entry = &oi->i_sibling;
+	}
+
+	*entry = next;
+	mark_buffer_dirty(bh);
+
+	if (prev != ~0) {
+		dirty = omfs_iget(dir->i_sb, prev);
+		if (!IS_ERR(dirty)) {
+			mark_inode_dirty(dirty);
+			iput(dirty);
+		}
+	}
+
+	err = 0;
+out_free_bh:
+	brelse(bh);
+out:
+	return err;
+}
+
+static int omfs_dir_is_empty(struct inode *inode)
+{
+	int nbuckets = (inode->i_size - OMFS_DIR_START) / 8;
+	struct buffer_head *bh;
+	u64 *ptr;
+	int i;
+
+	bh = sb_bread(inode->i_sb, clus_to_blk(OMFS_SB(inode->i_sb),
+			inode->i_ino));
+
+	if (!bh)
+		return 0;
+
+	ptr = (u64 *) &bh->b_data[OMFS_DIR_START];
+
+	for (i = 0; i < nbuckets; i++, ptr++)
+		if (*ptr != ~0)
+			break;
+
+	brelse(bh);
+	return *ptr != ~0;
+}
+
+static int omfs_unlink(struct inode *dir, struct dentry *dentry)
+{
+	int ret;
+	struct inode *inode = dentry->d_inode;
+
+	ret = omfs_delete_entry(dentry);
+	if (ret)
+		goto end_unlink;
+
+	inode_dec_link_count(inode);
+	mark_inode_dirty(dir);
+
+end_unlink:
+	return ret;
+}
+
+static int omfs_rmdir(struct inode *dir, struct dentry *dentry)
+{
+	int err = -ENOTEMPTY;
+	struct inode *inode = dentry->d_inode;
+
+	if (omfs_dir_is_empty(inode)) {
+		err = omfs_unlink(dir, dentry);
+		if (!err)
+			inode_dec_link_count(inode);
+	}
+	return err;
+}
+
+static int omfs_add_node(struct inode *dir, struct dentry *dentry, int mode)
+{
+	int err;
+	struct inode *inode = omfs_new_inode(dir, mode);
+
+	if (IS_ERR(inode))
+		return PTR_ERR(inode);
+
+	err = omfs_make_empty(inode, dir->i_sb);
+	if (err)
+		goto out_free_inode;
+
+	err = omfs_add_link(dentry, inode);
+	if (err)
+		goto out_free_inode;
+
+	d_instantiate(dentry, inode);
+	return 0;
+
+out_free_inode:
+	iput(inode);
+	return err;
+}
+
+static int omfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+{
+	return omfs_add_node(dir, dentry, mode | S_IFDIR);
+}
+
+static int omfs_create(struct inode *dir, struct dentry *dentry, int mode,
+		struct nameidata *nd)
+{
+	return omfs_add_node(dir, dentry, mode | S_IFREG);
+}
+
+static struct dentry *omfs_lookup(struct inode *dir, struct dentry *dentry,
+				  struct nameidata *nd)
+{
+	struct buffer_head *bh;
+	struct inode *inode = NULL;
+
+	if (dentry->d_name.len > OMFS_NAMELEN)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	bh = omfs_find_entry(dir, dentry->d_name.name, dentry->d_name.len);
+	if (!IS_ERR(bh)) {
+		struct omfs_inode *oi = (struct omfs_inode *)bh->b_data;
+		ino_t ino = be64_to_cpu(oi->i_head.h_self);
+		brelse(bh);
+		inode = omfs_iget(dir->i_sb, ino);
+		if (IS_ERR(inode))
+			return ERR_CAST(inode);
+	}
+	d_add(dentry, inode);
+	return NULL;
+}
+
+/* sanity check block's self pointer */
+int omfs_is_bad(struct omfs_sb_info *sbi, struct omfs_header *header,
+	u64 fsblock)
+{
+	int is_bad;
+	u64 ino = be64_to_cpu(header->h_self);
+	is_bad = ((ino != fsblock) || (ino < sbi->s_root_ino) ||
+		(ino > sbi->s_num_blocks));
+
+	if (is_bad)
+		printk(KERN_WARNING "omfs: bad hash chain detected\n");
+
+	return is_bad;
+}
+
+static int omfs_fill_chain(struct file *filp, void *dirent, filldir_t filldir,
+		u64 fsblock, int hindex)
+{
+	struct inode *dir = filp->f_dentry->d_inode;
+	struct buffer_head *bh;
+	struct omfs_inode *oi;
+	u64 self;
+	int res = 0;
+	unsigned char d_type;
+
+	/* follow chain in this bucket */
+	while (fsblock != ~0) {
+		bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb),
+				fsblock));
+		if (!bh)
+			goto out;
+
+		oi = (struct omfs_inode *) bh->b_data;
+		if (omfs_is_bad(OMFS_SB(dir->i_sb), &oi->i_head, fsblock)) {
+			brelse(bh);
+			goto out;
+		}
+
+		self = fsblock;
+		fsblock = be64_to_cpu(oi->i_sibling);
+
+		/* skip visited nodes */
+		if (hindex) {
+			hindex--;
+			brelse(bh);
+			continue;
+		}
+
+		d_type = (oi->i_type == OMFS_DIR) ? DT_DIR : DT_REG;
+
+		res = filldir(dirent, oi->i_name, strnlen(oi->i_name,
+			OMFS_NAMELEN), filp->f_pos, self, d_type);
+		if (res == 0)
+			filp->f_pos++;
+		brelse(bh);
+	}
+out:
+	return res;
+}
+
+static int omfs_rename(struct inode *old_dir, struct dentry *old_dentry,
+		struct inode *new_dir, struct dentry *new_dentry)
+{
+	struct inode *new_inode = new_dentry->d_inode;
+	struct inode *old_inode = old_dentry->d_inode;
+	struct buffer_head *bh;
+	int is_dir;
+	int err;
+
+	is_dir = S_ISDIR(old_inode->i_mode);
+
+	if (new_inode) {
+		/* overwriting existing file/dir */
+		err = -ENOTEMPTY;
+		if (is_dir && !omfs_dir_is_empty(new_inode))
+			goto out;
+
+		err = -ENOENT;
+		bh = omfs_find_entry(new_dir, new_dentry->d_name.name,
+			new_dentry->d_name.len);
+		if (IS_ERR(bh))
+			goto out;
+		brelse(bh);
+
+		err = omfs_unlink(new_dir, new_dentry);
+		if (err)
+			goto out;
+	}
+
+	/* since omfs locates files by name, we need to unlink _before_
+	 * adding the new link or we won't find the old one */
+	inode_inc_link_count(old_inode);
+	err = omfs_unlink(old_dir, old_dentry);
+	if (err) {
+		inode_dec_link_count(old_inode);
+		goto out;
+	}
+
+	err = omfs_add_link(new_dentry, old_inode);
+	if (err)
+		goto out;
+
+	old_inode->i_ctime = CURRENT_TIME_SEC;
+out:
+	return err;
+}
+
+static int omfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
+{
+	struct inode *dir = filp->f_dentry->d_inode;
+	struct buffer_head *bh;
+	loff_t offset, res;
+	unsigned int hchain, hindex;
+	int nbuckets;
+	u64 fsblock;
+	int ret = -EINVAL;
+
+	if (filp->f_pos >> 32)
+		goto success;
+
+	switch ((unsigned long) filp->f_pos) {
+	case 0:
+		if (filldir(dirent, ".", 1, 0, dir->i_ino, DT_DIR) < 0)
+			goto success;
+		filp->f_pos++;
+		/* fall through */
+	case 1:
+		if (filldir(dirent, "..", 2, 1,
+		    parent_ino(filp->f_dentry), DT_DIR) < 0)
+			goto success;
+		filp->f_pos = 1 << 20;
+		/* fall through */
+	}
+
+	nbuckets = (dir->i_size - OMFS_DIR_START) / 8;
+
+	/* high 12 bits store bucket + 1 and low 20 bits store hash index */
+	hchain = (filp->f_pos >> 20) - 1;
+	hindex = filp->f_pos & 0xfffff;
+
+	bh = sb_bread(dir->i_sb, clus_to_blk(OMFS_SB(dir->i_sb), dir->i_ino));
+	if (!bh)
+		goto out;
+
+	offset = OMFS_DIR_START + hchain * 8;
+
+	for (; hchain < nbuckets; hchain++, offset += 8) {
+		fsblock = be64_to_cpu(*((__be64 *) &bh->b_data[offset]));
+
+		res = omfs_fill_chain(filp, dirent, filldir, fsblock, hindex);
+		hindex = 0;
+		if (res < 0)
+			break;
+
+		filp->f_pos = (hchain+2) << 20;
+	}
+	brelse(bh);
+success:
+	ret = 0;
+out:
+	return ret;
+}
+
+struct inode_operations omfs_dir_inops = {
+	.lookup = omfs_lookup,
+	.mkdir = omfs_mkdir,
+	.rename = omfs_rename,
+	.create = omfs_create,
+	.unlink = omfs_unlink,
+	.rmdir = omfs_rmdir,
+};
+
+struct file_operations omfs_dir_operations = {
+	.read = generic_read_dir,
+	.readdir = omfs_readdir,
+};
-- 
cgit v1.2.3


From 8f09e98768c17287df076580c4cc72ac358312c6 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Fri, 25 Jul 2008 19:45:16 -0700
Subject: omfs: add file routines

Add functions for reading and manipulating the storage of file data in
the extent-based OMFS.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/omfs/file.c | 346 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 346 insertions(+)
 create mode 100644 fs/omfs/file.c

diff --git a/fs/omfs/file.c b/fs/omfs/file.c
new file mode 100644
index 00000000000..66e01fae438
--- /dev/null
+++ b/fs/omfs/file.c
@@ -0,0 +1,346 @@
+/*
+ * OMFS (as used by RIO Karma) file operations.
+ * Copyright (C) 2005 Bob Copeland <me@bobcopeland.com>
+ * Released under GPL v2.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/buffer_head.h>
+#include <linux/mpage.h>
+#include "omfs.h"
+
+static int omfs_sync_file(struct file *file, struct dentry *dentry,
+		int datasync)
+{
+	struct inode *inode = dentry->d_inode;
+	int err;
+
+	err = sync_mapping_buffers(inode->i_mapping);
+	if (!(inode->i_state & I_DIRTY))
+		return err;
+	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
+		return err;
+	err |= omfs_sync_inode(inode);
+	return err ? -EIO : 0;
+}
+
+void omfs_make_empty_table(struct buffer_head *bh, int offset)
+{
+	struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset];
+
+	oe->e_next = ~0ULL;
+	oe->e_extent_count = cpu_to_be32(1),
+	oe->e_fill = cpu_to_be32(0x22),
+	oe->e_entry.e_cluster = ~0ULL;
+	oe->e_entry.e_blocks = ~0ULL;
+}
+
+int omfs_shrink_inode(struct inode *inode)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
+	struct omfs_extent *oe;
+	struct omfs_extent_entry *entry;
+	struct buffer_head *bh;
+	u64 next, last;
+	u32 extent_count;
+	int ret;
+
+	/* traverse extent table, freeing each entry that is greater
+	 * than inode->i_size;
+	 */
+	next = inode->i_ino;
+
+	/* only support truncate -> 0 for now */
+	ret = -EIO;
+	if (inode->i_size != 0)
+		goto out;
+
+	bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+	if (!bh)
+		goto out;
+
+	oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+
+	for (;;) {
+
+		if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next)) {
+			brelse(bh);
+			goto out;
+		}
+
+		extent_count = be32_to_cpu(oe->e_extent_count);
+		last = next;
+		next = be64_to_cpu(oe->e_next);
+		entry = &oe->e_entry;
+
+		/* ignore last entry as it is the terminator */
+		for (; extent_count > 1; extent_count--) {
+			u64 start, count;
+			start = be64_to_cpu(entry->e_cluster);
+			count = be64_to_cpu(entry->e_blocks);
+
+			omfs_clear_range(inode->i_sb, start, (int) count);
+			entry++;
+		}
+		omfs_make_empty_table(bh, (char *) oe - bh->b_data);
+		mark_buffer_dirty(bh);
+		brelse(bh);
+
+		if (last != inode->i_ino)
+			omfs_clear_range(inode->i_sb, last, sbi->s_mirrors);
+
+		if (next == ~0)
+			break;
+
+		bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+		if (!bh)
+			goto out;
+		oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void omfs_truncate(struct inode *inode)
+{
+	omfs_shrink_inode(inode);
+	mark_inode_dirty(inode);
+}
+
+/*
+ * Add new blocks to the current extent, or create new entries/continuations
+ * as necessary.
+ */
+static int omfs_grow_extent(struct inode *inode, struct omfs_extent *oe,
+			u64 *ret_block)
+{
+	struct omfs_extent_entry *terminator;
+	struct omfs_extent_entry *entry = &oe->e_entry;
+	struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
+	u32 extent_count = be32_to_cpu(oe->e_extent_count);
+	u64 new_block = 0;
+	u32 max_count;
+	int new_count;
+	int ret = 0;
+
+	/* reached the end of the extent table with no blocks mapped.
+	 * there are three possibilities for adding: grow last extent,
+	 * add a new extent to the current extent table, and add a
+	 * continuation inode.  in last two cases need an allocator for
+	 * sbi->s_cluster_size
+	 */
+
+	/* TODO: handle holes */
+
+	/* should always have a terminator */
+	if (extent_count < 1)
+		return -EIO;
+
+	/* trivially grow current extent, if next block is not taken */
+	terminator = entry + extent_count - 1;
+	if (extent_count > 1) {
+		entry = terminator-1;
+		new_block = be64_to_cpu(entry->e_cluster) +
+			be64_to_cpu(entry->e_blocks);
+
+		if (omfs_allocate_block(inode->i_sb, new_block)) {
+			entry->e_blocks =
+				cpu_to_be64(be64_to_cpu(entry->e_blocks) + 1);
+			terminator->e_blocks = ~(cpu_to_be64(
+				be64_to_cpu(~terminator->e_blocks) + 1));
+			goto out;
+		}
+	}
+	max_count = (sbi->s_sys_blocksize - OMFS_EXTENT_START -
+		sizeof(struct omfs_extent)) /
+		sizeof(struct omfs_extent_entry) + 1;
+
+	/* TODO: add a continuation block here */
+	if (be32_to_cpu(oe->e_extent_count) > max_count-1)
+		return -EIO;
+
+	/* try to allocate a new cluster */
+	ret = omfs_allocate_range(inode->i_sb, 1, sbi->s_clustersize,
+		&new_block, &new_count);
+	if (ret)
+		goto out_fail;
+
+	/* copy terminator down an entry */
+	entry = terminator;
+	terminator++;
+	memcpy(terminator, entry, sizeof(struct omfs_extent_entry));
+
+	entry->e_cluster = cpu_to_be64(new_block);
+	entry->e_blocks = cpu_to_be64((u64) new_count);
+
+	terminator->e_blocks = ~(cpu_to_be64(
+		be64_to_cpu(~terminator->e_blocks) + (u64) new_count));
+
+	/* write in new entry */
+	oe->e_extent_count = cpu_to_be32(1 + be32_to_cpu(oe->e_extent_count));
+
+out:
+	*ret_block = new_block;
+out_fail:
+	return ret;
+}
+
+/*
+ * Scans across the directory table for a given file block number.
+ * If block not found, return 0.
+ */
+static sector_t find_block(struct inode *inode, struct omfs_extent_entry *ent,
+			sector_t block, int count, int *left)
+{
+	/* count > 1 because of terminator */
+	sector_t searched = 0;
+	for (; count > 1; count--) {
+		int numblocks = clus_to_blk(OMFS_SB(inode->i_sb),
+			be64_to_cpu(ent->e_blocks));
+
+		if (block >= searched  &&
+		    block < searched + numblocks) {
+			/*
+			 * found it at cluster + (block - searched)
+			 * numblocks - (block - searched) is remainder
+			 */
+			*left = numblocks - (block - searched);
+			return clus_to_blk(OMFS_SB(inode->i_sb),
+				be64_to_cpu(ent->e_cluster)) +
+				block - searched;
+		}
+		searched += numblocks;
+		ent++;
+	}
+	return 0;
+}
+
+static int omfs_get_block(struct inode *inode, sector_t block,
+			  struct buffer_head *bh_result, int create)
+{
+	struct buffer_head *bh;
+	sector_t next, offset;
+	int ret;
+	u64 new_block;
+	int extent_count;
+	struct omfs_extent *oe;
+	struct omfs_extent_entry *entry;
+	struct omfs_sb_info *sbi = OMFS_SB(inode->i_sb);
+	int max_blocks = bh_result->b_size >> inode->i_blkbits;
+	int remain;
+
+	ret = -EIO;
+	bh = sb_bread(inode->i_sb, clus_to_blk(sbi, inode->i_ino));
+	if (!bh)
+		goto out;
+
+	oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+	next = inode->i_ino;
+
+	for (;;) {
+
+		if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next))
+			goto out_brelse;
+
+		extent_count = be32_to_cpu(oe->e_extent_count);
+		next = be64_to_cpu(oe->e_next);
+		entry = &oe->e_entry;
+
+		offset = find_block(inode, entry, block, extent_count, &remain);
+		if (offset > 0) {
+			ret = 0;
+			map_bh(bh_result, inode->i_sb, offset);
+			if (remain > max_blocks)
+				remain = max_blocks;
+			bh_result->b_size = (remain << inode->i_blkbits);
+			goto out_brelse;
+		}
+		if (next == ~0)
+			break;
+
+		brelse(bh);
+		bh = sb_bread(inode->i_sb, clus_to_blk(sbi, next));
+		if (!bh)
+			goto out;
+		oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+	}
+	if (create) {
+		ret = omfs_grow_extent(inode, oe, &new_block);
+		if (ret == 0) {
+			mark_buffer_dirty(bh);
+			mark_inode_dirty(inode);
+			map_bh(bh_result, inode->i_sb,
+					clus_to_blk(sbi, new_block));
+		}
+	}
+out_brelse:
+	brelse(bh);
+out:
+	return ret;
+}
+
+static int omfs_readpage(struct file *file, struct page *page)
+{
+	return block_read_full_page(page, omfs_get_block);
+}
+
+static int omfs_readpages(struct file *file, struct address_space *mapping,
+		struct list_head *pages, unsigned nr_pages)
+{
+	return mpage_readpages(mapping, pages, nr_pages, omfs_get_block);
+}
+
+static int omfs_writepage(struct page *page, struct writeback_control *wbc)
+{
+	return block_write_full_page(page, omfs_get_block, wbc);
+}
+
+static int
+omfs_writepages(struct address_space *mapping, struct writeback_control *wbc)
+{
+	return mpage_writepages(mapping, wbc, omfs_get_block);
+}
+
+static int omfs_write_begin(struct file *file, struct address_space *mapping,
+			loff_t pos, unsigned len, unsigned flags,
+			struct page **pagep, void **fsdata)
+{
+	*pagep = NULL;
+	return block_write_begin(file, mapping, pos, len, flags,
+				pagep, fsdata, omfs_get_block);
+}
+
+static sector_t omfs_bmap(struct address_space *mapping, sector_t block)
+{
+	return generic_block_bmap(mapping, block, omfs_get_block);
+}
+
+struct file_operations omfs_file_operations = {
+	.llseek = generic_file_llseek,
+	.read = do_sync_read,
+	.write = do_sync_write,
+	.aio_read = generic_file_aio_read,
+	.aio_write = generic_file_aio_write,
+	.mmap = generic_file_mmap,
+	.fsync = omfs_sync_file,
+	.splice_read = generic_file_splice_read,
+};
+
+struct inode_operations omfs_file_inops = {
+	.truncate = omfs_truncate
+};
+
+struct address_space_operations omfs_aops = {
+	.readpage = omfs_readpage,
+	.readpages = omfs_readpages,
+	.writepage = omfs_writepage,
+	.writepages = omfs_writepages,
+	.sync_page = block_sync_page,
+	.write_begin = omfs_write_begin,
+	.write_end = generic_write_end,
+	.bmap = omfs_bmap,
+};
+
-- 
cgit v1.2.3


From 36cc410a6799a205bfc6ccc38abd9d52f2afba64 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Fri, 25 Jul 2008 19:45:17 -0700
Subject: omfs: add bitmap routines

Add block allocation and block bitmap management routines for OMFS.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/omfs/bitmap.c | 192 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 192 insertions(+)
 create mode 100644 fs/omfs/bitmap.c

diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c
new file mode 100644
index 00000000000..dc75f22be3f
--- /dev/null
+++ b/fs/omfs/bitmap.c
@@ -0,0 +1,192 @@
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/buffer_head.h>
+#include <asm/div64.h>
+#include "omfs.h"
+
+unsigned long omfs_count_free(struct super_block *sb)
+{
+	unsigned int i;
+	unsigned long sum = 0;
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int nbits = sb->s_blocksize * 8;
+
+	for (i = 0; i < sbi->s_imap_size; i++)
+		sum += nbits - bitmap_weight(sbi->s_imap[i], nbits);
+
+	return sum;
+}
+
+/*
+ *  Counts the run of zero bits starting at bit up to max.
+ *  It handles the case where a run might spill over a buffer.
+ *  Called with bitmap lock.
+ */
+static int count_run(unsigned long **addr, int nbits,
+		int addrlen, int bit, int max)
+{
+	int count = 0;
+	int x;
+
+	for (; addrlen > 0; addrlen--, addr++) {
+		x = find_next_bit(*addr, nbits, bit);
+		count += x - bit;
+
+		if (x < nbits || count > max)
+			return min(count, max);
+
+		bit = 0;
+	}
+	return min(count, max);
+}
+
+/*
+ * Sets or clears the run of count bits starting with bit.
+ * Called with bitmap lock.
+ */
+static int set_run(struct super_block *sb, int map,
+		int nbits, int bit, int count, int set)
+{
+	int i;
+	int err;
+	struct buffer_head *bh;
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+
+ 	err = -ENOMEM;
+	bh = sb_bread(sb, clus_to_blk(sbi, sbi->s_bitmap_ino) + map);
+	if (!bh)
+		goto out;
+
+	for (i = 0; i < count; i++, bit++) {
+		if (bit >= nbits) {
+			bit = 0;
+			map++;
+
+			mark_buffer_dirty(bh);
+			brelse(bh);
+			bh = sb_bread(sb,
+				clus_to_blk(sbi, sbi->s_bitmap_ino) + map);
+			if (!bh)
+				goto out;
+		}
+		if (set) {
+			set_bit(bit, sbi->s_imap[map]);
+			set_bit(bit, (long *) bh->b_data);
+		} else {
+			clear_bit(bit, sbi->s_imap[map]);
+			clear_bit(bit, (long *) bh->b_data);
+		}
+	}
+	mark_buffer_dirty(bh);
+	brelse(bh);
+	err = 0;
+out:
+	return err;
+}
+
+/*
+ * Tries to allocate exactly one block.  Returns true if sucessful.
+ */
+int omfs_allocate_block(struct super_block *sb, u64 block)
+{
+	struct buffer_head *bh;
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int bits_per_entry = 8 * sb->s_blocksize;
+	int map, bit;
+	int ret = 0;
+	u64 tmp;
+
+	tmp = block;
+	bit = do_div(tmp, bits_per_entry);
+	map = tmp;
+
+	mutex_lock(&sbi->s_bitmap_lock);
+	if (map >= sbi->s_imap_size || test_and_set_bit(bit, sbi->s_imap[map]))
+		goto out;
+
+	if (sbi->s_bitmap_ino > 0) {
+		bh = sb_bread(sb, clus_to_blk(sbi, sbi->s_bitmap_ino) + map);
+		if (!bh)
+			goto out;
+
+		set_bit(bit, (long *) bh->b_data);
+		mark_buffer_dirty(bh);
+		brelse(bh);
+	}
+	ret = 1;
+out:
+	mutex_unlock(&sbi->s_bitmap_lock);
+	return ret;
+}
+
+
+/*
+ *  Tries to allocate a set of blocks.	The request size depends on the
+ *  type: for inodes, we must allocate sbi->s_mirrors blocks, and for file
+ *  blocks, we try to allocate sbi->s_clustersize, but can always get away
+ *  with just one block.
+ */
+int omfs_allocate_range(struct super_block *sb,
+			int min_request,
+			int max_request,
+			u64 *return_block,
+			int *return_size)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int bits_per_entry = 8 * sb->s_blocksize;
+	int ret = 0;
+	int i, run, bit;
+
+	mutex_lock(&sbi->s_bitmap_lock);
+	for (i = 0; i < sbi->s_imap_size; i++) {
+		bit = 0;
+		while (bit < bits_per_entry) {
+			bit = find_next_zero_bit(sbi->s_imap[i], bits_per_entry,
+				bit);
+
+			if (bit == bits_per_entry)
+				break;
+
+			run = count_run(&sbi->s_imap[i], bits_per_entry,
+				sbi->s_imap_size-i, bit, max_request);
+
+			if (run >= min_request)
+				goto found;
+			bit += run;
+		}
+	}
+	ret = -ENOSPC;
+	goto out;
+
+found:
+	*return_block = i * bits_per_entry + bit;
+	*return_size = run;
+	ret = set_run(sb, i, bits_per_entry, bit, run, 1);
+
+out:
+	mutex_unlock(&sbi->s_bitmap_lock);
+	return ret;
+}
+
+/*
+ * Clears count bits starting at a given block.
+ */
+int omfs_clear_range(struct super_block *sb, u64 block, int count)
+{
+	struct omfs_sb_info *sbi = OMFS_SB(sb);
+	int bits_per_entry = 8 * sb->s_blocksize;
+	u64 tmp;
+	int map, bit, ret;
+
+	tmp = block;
+	bit = do_div(tmp, bits_per_entry);
+	map = tmp;
+
+	if (map >= sbi->s_imap_size)
+		return 0;
+
+	mutex_lock(&sbi->s_bitmap_lock);
+	ret = set_run(sb, map, bits_per_entry, bit, count, 0);
+	mutex_unlock(&sbi->s_bitmap_lock);
+	return ret;
+}
-- 
cgit v1.2.3


From 63ca8ce2a2641f9cb5f0add33ced4591681d1cd7 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Fri, 25 Jul 2008 19:45:17 -0700
Subject: omfs: update kbuild to include OMFS

Adds OMFS to the fs Kconfig and Makefile

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/Kconfig       | 13 +++++++++++++
 fs/Makefile      |  1 +
 fs/omfs/Makefile |  4 ++++
 3 files changed, 18 insertions(+)
 create mode 100644 fs/omfs/Makefile

diff --git a/fs/Kconfig b/fs/Kconfig
index 97e3bdedb1e..d3873583360 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1383,6 +1383,19 @@ config MINIX_FS
 	  partition (the one containing the directory /) cannot be compiled as
 	  a module.
 
+config OMFS_FS
+	tristate "SonicBlue Optimized MPEG File System support"
+	depends on BLOCK
+	select CRC_ITU_T
+	help
+	  This is the proprietary file system used by the Rio Karma music
+	  player and ReplayTV DVR.  Despite the name, this filesystem is not
+	  more efficient than a standard FS for MPEG files, in fact likely
+	  the opposite is true.  Say Y if you have either of these devices
+	  and wish to mount its disk.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called omfs.  If unsure, say N.
 
 config HPFS_FS
 	tristate "OS/2 HPFS file system support"
diff --git a/fs/Makefile b/fs/Makefile
index 3b2178b4bb6..a1482a5eff1 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_ADFS_FS)		+= adfs/
 obj-$(CONFIG_FUSE_FS)		+= fuse/
 obj-$(CONFIG_UDF_FS)		+= udf/
 obj-$(CONFIG_SUN_OPENPROMFS)	+= openpromfs/
+obj-$(CONFIG_OMFS_FS)		+= omfs/
 obj-$(CONFIG_JFS_FS)		+= jfs/
 obj-$(CONFIG_XFS_FS)		+= xfs/
 obj-$(CONFIG_9P_FS)		+= 9p/
diff --git a/fs/omfs/Makefile b/fs/omfs/Makefile
new file mode 100644
index 00000000000..8b82b63f112
--- /dev/null
+++ b/fs/omfs/Makefile
@@ -0,0 +1,4 @@
+
+obj-$(CONFIG_OMFS_FS) += omfs.o
+
+omfs-y := bitmap.o dir.o file.o inode.o
-- 
cgit v1.2.3


From 0ad122d901977890de554fdd3ff65474efc1a9bf Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Fri, 25 Jul 2008 19:45:18 -0700
Subject: omfs: add MAINTAINERS entry

Add the MAINTAINERS entry for OMFS.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 4cbf6016a9b..03c5d6ccb9f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3123,6 +3123,12 @@ W:	http://oss.oracle.com/projects/ocfs2/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
 S:	Supported
 
+OMFS FILESYSTEM
+P:	Bob Copeland
+M:	me@bobcopeland.com
+L:	linux-karma-devel@lists.sourceforge.net
+S:	Maintained
+
 OMNIKEY CARDMAN 4000 DRIVER
 P:	Harald Welte
 M:	laforge@gnumonks.org
-- 
cgit v1.2.3


From 42a9a58361d3b65f4a7c2ad280cc1ec9b657e7d2 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 25 Jul 2008 19:45:18 -0700
Subject: cris: use the common ascii hex helpers

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/cris/arch-v10/kernel/kgdb.c | 79 ++++++++++++----------------------------
 arch/cris/arch-v32/kernel/kgdb.c | 60 +++++++-----------------------
 2 files changed, 37 insertions(+), 102 deletions(-)

diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index a3ca5515074..6fea45f2e40 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -278,14 +278,6 @@ void putDebugChar (int val);
 
 void enableDebugIRQ (void);
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex (int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex (int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex (char ch);
 
@@ -356,9 +348,6 @@ extern unsigned char executing_task;
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char remcomInBuffer[BUFMAX];
 static char remcomOutBuffer[BUFMAX];
@@ -499,8 +488,8 @@ gdb_cris_strtol (const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 	
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
         
         if (endptr)
         {
@@ -670,22 +659,6 @@ read_register (char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex (char ch)
@@ -721,8 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
                 for (i = 0; i < count; i++) {
                         ch = *mem++;
-                        *buf++ = highhex (ch);
-                        *buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
                 }
         }
         
@@ -857,9 +829,9 @@ putpacket(char *buffer)
 				src++;
 			}
 		}
-		putDebugChar ('#');
-		putDebugChar (highhex (checksum));
-		putDebugChar (lowhex (checksum));
+		putDebugChar('#');
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -895,9 +867,8 @@ stub_is_stopped(int sigval)
         
 	/* Send trap type (converted to signal) */
 
-	*ptr++ = 'T';	
-	*ptr++ = highhex (sigval);
-	*ptr++ = lowhex (sigval);
+	*ptr++ = 'T';
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send register contents. We probably only need to send the
 	 * PC, frame pointer and stack pointer here. Other registers will be
@@ -910,9 +881,7 @@ stub_is_stopped(int sigval)
                 status = read_register (regno, &reg_cont);
                 
 		if (status == SUCCESS) {
-                        
-                        *ptr++ = highhex (regno);
-                        *ptr++ = lowhex (regno);
+			ptr = pack_hex_byte(ptr, regno);
                         *ptr++ = ':';
 
                         ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
@@ -937,8 +906,8 @@ stub_is_stopped(int sigval)
 	/* Store thread:r...; with the executing task TID. */
 	gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:");
 	pos += gdb_cris_strlen ("thread:");
-	remcomOutBuffer[pos++] = highhex (executing_task);
-	remcomOutBuffer[pos++] = lowhex (executing_task);
+	remcomOutBuffer[pos++] = hex_asc_hi(executing_task);
+	remcomOutBuffer[pos++] = hex_asc_lo(executing_task);
 	gdb_cris_strcpy (&remcomOutBuffer[pos], ";");
 #endif
 
@@ -1126,8 +1095,8 @@ handle_exception (int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				remcomOutBuffer[0] = 'S';
-				remcomOutBuffer[1] = highhex (sigval);
-				remcomOutBuffer[2] = lowhex (sigval);
+				remcomOutBuffer[1] = hex_asc_hi(sigval);
+				remcomOutBuffer[2] = hex_asc_lo(sigval);
 				remcomOutBuffer[3] = 0;
 				break;
 				
@@ -1224,23 +1193,23 @@ handle_exception (int sigval)
 						case 'C':
 							/* Identify the remote current thread. */
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QC");
-							remcomOutBuffer[2] = highhex (current_thread_c);
-							remcomOutBuffer[3] = lowhex (current_thread_c);
+							remcomOutBuffer[2] = hex_asc_hi(current_thread_c);
+							remcomOutBuffer[3] = hex_asc_lo(current_thread_c);
 							remcomOutBuffer[4] = '\0';
 							break;
 						case 'L':
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QM");
 							/* Reply with number of threads. */
 							if (os_is_started()) {
-								remcomOutBuffer[2] = highhex (number_of_tasks);
-								remcomOutBuffer[3] = lowhex (number_of_tasks);
+								remcomOutBuffer[2] = hex_asc_hi(number_of_tasks);
+								remcomOutBuffer[3] = hex_asc_lo(number_of_tasks);
 							}
 							else {
-								remcomOutBuffer[2] = highhex (0);
-								remcomOutBuffer[3] = lowhex (1);
+								remcomOutBuffer[2] = hex_asc_hi(0);
+								remcomOutBuffer[3] = hex_asc_lo(1);
 							}
 							/* Done with the reply. */
-							remcomOutBuffer[4] = lowhex (1);
+							remcomOutBuffer[4] = hex_asc_lo(1);
 							pos = 5;
 							/* Expects the argument thread id. */
 							for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++)
@@ -1251,16 +1220,16 @@ handle_exception (int sigval)
 								for (thread_id = 0; thread_id < number_of_tasks; thread_id++) {
 									nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 									for (; pos < nextpos; pos ++)
-										remcomOutBuffer[pos] = lowhex (0);
-									remcomOutBuffer[pos++] = lowhex (thread_id);
+										remcomOutBuffer[pos] = hex_asc_lo(0);
+									remcomOutBuffer[pos++] = hex_asc_lo(thread_id);
 								}
 							}
 							else {
 								/* Store the thread identifier of the boot task. */
 								nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 								for (; pos < nextpos; pos ++)
-									remcomOutBuffer[pos] = lowhex (0);
-								remcomOutBuffer[pos++] = lowhex (current_thread_c);
+									remcomOutBuffer[pos] = hex_asc_lo(0);
+								remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c);
 							}
 							remcomOutBuffer[pos] = '\0';
 							break;
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index 4e2e2e271ef..8bd5a5bc0dc 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -398,14 +398,6 @@ void putDebugChar(int val)
 }
 #endif
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex(int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex(int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex(char ch);
 
@@ -464,9 +456,6 @@ void breakpoint(void);
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char input_buffer[BUFMAX];
 static char output_buffer[BUFMAX];
@@ -550,8 +539,8 @@ gdb_cris_strtol(const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
 
         if (endptr) {
                 /* Unconverted suffix is stored in endptr unless endptr is NULL. */
@@ -655,22 +644,6 @@ read_register(char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex(char ch)
@@ -704,8 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
 		for (i = 0; i < count; i++) {
 			ch = *mem++;
-			*buf++ = highhex (ch);
-			*buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
 		}
         }
         /* Terminate properly. */
@@ -723,8 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count)
 	mem += count - 1;
 	for (i = 0; i < count; i++) {
 		ch = *mem--;
-		*buf++ = highhex (ch);
-		*buf++ = lowhex (ch);
+		buf = pack_hex_byte(buf, ch);
         }
 
         /* Terminate properly. */
@@ -862,8 +833,8 @@ putpacket(char *buffer)
 			}
 		}
 		putDebugChar('#');
-		putDebugChar(highhex (checksum));
-		putDebugChar(lowhex (checksum));
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -909,8 +880,7 @@ stub_is_stopped(int sigval)
 	/* Send trap type (converted to signal) */
 
 	*ptr++ = 'T';
-	*ptr++ = highhex(sigval);
-	*ptr++ = lowhex(sigval);
+	ptr = pack_hex_byte(ptr, sigval);
 
 	if (((reg.exs & 0xff00) >> 8) == 0xc) {
 
@@ -1018,30 +988,26 @@ stub_is_stopped(int sigval)
 	}
 	/* Only send PC, frame and stack pointer. */
 	read_register(PC, &reg_cont);
-	*ptr++ = highhex(PC);
-	*ptr++ = lowhex(PC);
+	ptr = pack_hex_byte(PC);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
 	*ptr++ = ';';
 
 	read_register(R8, &reg_cont);
-	*ptr++ = highhex(R8);
-	*ptr++ = lowhex(R8);
+	ptr = pack_hex_byte(R8);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
 	*ptr++ = ';';
 
 	read_register(SP, &reg_cont);
-	*ptr++ = highhex(SP);
-	*ptr++ = lowhex(SP);
+	ptr = pack_hex_byte(SP);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
 	*ptr++ = ';';
 
 	/* Send ERP as well; this will save us an entire register fetch in some cases. */
         read_register(ERP, &reg_cont);
-        *ptr++ = highhex(ERP);
-        *ptr++ = lowhex(ERP);
+	ptr = pack_hex_byte(ERP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
         *ptr++ = ';';
@@ -1533,8 +1499,8 @@ handle_exception(int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				output_buffer[0] = 'S';
-				output_buffer[1] = highhex(sigval);
-				output_buffer[2] = lowhex(sigval);
+				output_buffer[1] = hex_asc_hi(sigval);
+				output_buffer[2] = hex_asc_lo(sigval);
 				output_buffer[3] = 0;
 				break;
 
-- 
cgit v1.2.3


From 19caeed6339aec02901e2f4c49d8e1d3d6090559 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 25 Jul 2008 19:45:19 -0700
Subject: frv: use the common ascii hex helpers

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/gdb-stub.c | 88 +++++++++++++++++++---------------------------
 1 file changed, 36 insertions(+), 52 deletions(-)

diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 48a0393e7ce..7ca8a6b19ac 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -182,8 +182,6 @@ extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_excep
 static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 static const char *regnames[] = {
 	"PSR ", "ISR ", "CCR ", "CCCR",
 	"LR  ", "LCR ", "PC  ", "_stt",
@@ -383,8 +381,8 @@ static int gdbstub_send_packet(char *buffer)
 		}
 
 		gdbstub_tx_char('#');
-		gdbstub_tx_char(hexchars[checksum >> 4]);
-		gdbstub_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_tx_char(hex_asc_hi(checksum));
+		gdbstub_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_rx_char(&ch,0),
 #ifdef GDBSTUB_DEBUG_PROTOCOL
@@ -674,8 +672,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&1 && count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -683,10 +680,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&3 && count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -694,14 +689,10 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	while (count>=4) {
 		if (!gdbstub_read_dword(mem,(uint32_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -709,10 +700,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -720,8 +709,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1471,22 +1459,22 @@ void gdbstub(int sigval)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1,0);
 
-		hx = hexchars[(brr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1500,12 +1488,10 @@ void gdbstub(int sigval)
 
 	/* Send trap type (converted to signal) */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send Error PC */
-	*ptr++ = hexchars[GDB_REG_PC >> 4];
-	*ptr++ = hexchars[GDB_REG_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1513,8 +1499,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_FP >> 4];
-	*ptr++ = hexchars[GDB_REG_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1522,8 +1507,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send stack pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_SP >> 4];
-	*ptr++ = hexchars[GDB_REG_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1548,8 +1532,8 @@ void gdbstub(int sigval)
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -2059,8 +2043,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_tx_char('#');
-	gdbstub_tx_char(hexchars[checksum >> 4]);
-	gdbstub_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_tx_char(hex_asc_hi(checksum));
+	gdbstub_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_tx_char('-');
-- 
cgit v1.2.3


From 2682497245e7d22160ae63032c378745a7f2cfe5 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Fri, 25 Jul 2008 19:45:20 -0700
Subject: mn10300: use the common ascii hex helpers

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/gdb-stub.c | 108 ++++++++++++++++++-----------------------
 1 file changed, 46 insertions(+), 62 deletions(-)

diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 21891c71d54..54be6afb555 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -163,8 +163,6 @@ static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 static char	trans_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 struct gdbstub_bkpt {
 	u8	*addr;		/* address of breakpoint */
 	u8	len;		/* size of breakpoint */
@@ -363,8 +361,8 @@ static int putpacket(char *buffer)
 		}
 
 		gdbstub_io_tx_char('#');
-		gdbstub_io_tx_char(hexchars[checksum >> 4]);
-		gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_io_tx_char(hex_asc_hi(checksum));
+		gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_io_rx_char(&ch, 0),
 		 ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
@@ -822,8 +820,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 1 && count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -831,10 +828,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 3 && count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -842,14 +837,10 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	while (count >= 4) {
 		if (gdbstub_read_dword(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -857,10 +848,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -868,8 +857,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1304,14 +1292,14 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
 
-		hx = hexchars[(excep & 0xf000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x0f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x00f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(excep);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1322,22 +1310,22 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
 
-		hx = hexchars[(bcberr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1353,14 +1341,12 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send trap type (converted to signal)
 	 */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/*
 	 * Send Error PC
 	 */
-	*ptr++ = hexchars[GDB_REGID_PC >> 4];
-	*ptr++ = hexchars[GDB_REGID_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1368,8 +1354,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REGID_FP >> 4];
-	*ptr++ = hexchars[GDB_REGID_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->a3, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1378,8 +1363,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send stack pointer
 	 */
 	ssp = (unsigned long) (regs + 1);
-	*ptr++ = hexchars[GDB_REGID_SP >> 4];
-	*ptr++ = hexchars[GDB_REGID_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&ssp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1399,8 +1383,8 @@ packet_waiting:
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -1838,8 +1822,8 @@ void gdbstub_exit(int status)
 
 	gdbstub_busy = 1;
 	output_buffer[0] = 'W';
-	output_buffer[1] = hexchars[(status >> 4) & 0x0F];
-	output_buffer[2] = hexchars[status & 0x0F];
+	output_buffer[1] = hex_asc_hi(status);
+	output_buffer[2] = hex_asc_lo(status);
 	output_buffer[3] = 0;
 
 	gdbstub_io_tx_char('$');
@@ -1853,8 +1837,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_io_tx_char('#');
-	gdbstub_io_tx_char(hexchars[checksum >> 4]);
-	gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_io_tx_char(hex_asc_hi(checksum));
+	gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_io_tx_flush();
-- 
cgit v1.2.3


From a0a8f5364a5ad248aec6cb705e0092ff563edc2f Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:20 -0700
Subject: x86: implement pte_special

Implement the pte_special bit for x86.  This is required to support
lockless get_user_pages, because we need to know whether or not we can
refcount a particular page given only its pte (and no vma).

[hugh@veritas.com: fix a BUG]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-x86/pgtable.h | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 3e5dbc4195f..04caa2f544d 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -18,6 +18,7 @@
 #define _PAGE_BIT_UNUSED2	10
 #define _PAGE_BIT_UNUSED3	11
 #define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
+#define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
 #define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
 
 #define _PAGE_PRESENT	(_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
@@ -34,6 +35,8 @@
 #define _PAGE_UNUSED3	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
 #define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
 #define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
+#define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
+#define __HAVE_ARCH_PTE_SPECIAL
 
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 #define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
@@ -54,7 +57,7 @@
 
 /* Set of bits not changed in pte_modify */
 #define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
-			 _PAGE_ACCESSED | _PAGE_DIRTY)
+			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
 
 #define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
 #define _PAGE_CACHE_WB		(0)
@@ -180,7 +183,7 @@ static inline int pte_exec(pte_t pte)
 
 static inline int pte_special(pte_t pte)
 {
-	return 0;
+	return pte_val(pte) & _PAGE_SPECIAL;
 }
 
 static inline int pmd_large(pmd_t pte)
@@ -246,7 +249,7 @@ static inline pte_t pte_clrglobal(pte_t pte)
 
 static inline pte_t pte_mkspecial(pte_t pte)
 {
-	return pte;
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
 }
 
 extern pteval_t __supported_pte_mask;
-- 
cgit v1.2.3


From 21cc199baa815d7b3f1ace4be20b9558cbddc00f Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:22 -0700
Subject: mm: introduce get_user_pages_fast

Introduce a new get_user_pages_fast mm API, which is basically a
get_user_pages with a less general API (but still tends to be suited to
the common case):

- task and mm are always current and current->mm
- force is always 0
- pages is always non-NULL
- don't pass back vmas

This restricted API can be implemented in a much more scalable way on many
architectures when the ptes are present, by walking the page tables
locklessly (no mmap_sem or page table locks).  When the ptes are not
populated, get_user_pages_fast() could be slower.

This is implemented locklessly on x86, and used in some key direct IO call
sites, in later patches, which provides nearly 10% performance improvement
on a threaded database workload.

Lots of other code could use this too, depending on use cases (eg.  grep
drivers/).  And it might inspire some new and clever ways to use it.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/mm.h | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/include/linux/mm.h b/include/linux/mm.h
index d87a5a5fe87..f3fd70d6029 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -833,6 +833,39 @@ extern int mprotect_fixup(struct vm_area_struct *vma,
 			  struct vm_area_struct **pprev, unsigned long start,
 			  unsigned long end, unsigned long newflags);
 
+#ifdef CONFIG_HAVE_GET_USER_PAGES_FAST
+/*
+ * get_user_pages_fast provides equivalent functionality to get_user_pages,
+ * operating on current and current->mm (force=0 and doesn't return any vmas).
+ *
+ * get_user_pages_fast may take mmap_sem and page tables, so no assumptions
+ * can be made about locking. get_user_pages_fast is to be implemented in a
+ * way that is advantageous (vs get_user_pages()) when the user memory area is
+ * already faulted in and present in ptes. However if the pages have to be
+ * faulted in, it may turn out to be slightly slower).
+ */
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages);
+
+#else
+/*
+ * Should probably be moved to asm-generic, and architectures can include it if
+ * they don't implement their own get_user_pages_fast.
+ */
+#define get_user_pages_fast(start, nr_pages, write, pages)	\
+({								\
+	struct mm_struct *mm = current->mm;			\
+	int ret;						\
+								\
+	down_read(&mm->mmap_sem);				\
+	ret = get_user_pages(current, mm, start, nr_pages,	\
+					write, 0, pages, NULL);	\
+	up_read(&mm->mmap_sem);					\
+								\
+	ret;							\
+})
+#endif
+
 /*
  * A callback you can register to apply pressure to ageable caches.
  *
-- 
cgit v1.2.3


From 8174c430e445a93016ef18f717fe570214fa38bf Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:24 -0700
Subject: x86: lockless get_user_pages_fast()

Implement get_user_pages_fast without locking in the fastpath on x86.

Do an optimistic lockless pagetable walk, without taking mmap_sem or any
page table locks or even mmap_sem.  Page table existence is guaranteed by
turning interrupts off (combined with the fact that we're always looking
up the current mm, means we can do the lockless page table walk within the
constraints of the TLB shootdown design).  Basically we can do this
lockless pagetable walk in a similar manner to the way the CPU's pagetable
walker does not have to take any locks to find present ptes.

This patch (combined with the subsequent ones to convert direct IO to use
it) was found to give about 10% performance improvement on a 2 socket 8
core Intel Xeon system running an OLTP workload on DB2 v9.5

 "To test the effects of the patch, an OLTP workload was run on an IBM
  x3850 M2 server with 2 processors (quad-core Intel Xeon processors at
  2.93 GHz) using IBM DB2 v9.5 running Linux 2.6.24rc7 kernel.  Comparing
  runs with and without the patch resulted in an overall performance
  benefit of ~9.8%.  Correspondingly, oprofiles showed that samples from
  __up_read and __down_read routines that is seen during thread contention
  for system resources was reduced from 2.8% down to .05%.  Monitoring the
  /proc/vmstat output from the patched run showed that the counter for
  fast_gup contained a very high number while the fast_gup_slow value was
  zero."

(fast_gup is the old name for get_user_pages_fast, fast_gup_slow is a
counter we had for the number of times the slowpath was invoked).

The main reason for the improvement is that DB2 has multiple threads each
issuing direct-IO.  Direct-IO uses get_user_pages, and thus the threads
contend the mmap_sem cacheline, and can also contend on page table locks.

I would anticipate larger performance gains on larger systems, however I
think DB2 uses an adaptive mix of threads and processes, so it could be
that thread contention remains pretty constant as machine size increases.
In which case, we stuck with "only" a 10% gain.

The downside of using get_user_pages_fast is that if there is not a pte
with the correct permissions for the access, we end up falling back to
get_user_pages and so the get_user_pages_fast is a bit of extra work.
However this should not be the common case in most performance critical
code.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: Kconfig fix]
[akpm@linux-foundation.org: Makefile fix/cleanup]
[akpm@linux-foundation.org: warning fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/Kconfig          |   1 +
 arch/x86/mm/Makefile      |   1 +
 arch/x86/mm/gup.c         | 258 ++++++++++++++++++++++++++++++++++++++++++++++
 include/asm-x86/uaccess.h |   1 +
 mm/Kconfig                |   3 +
 5 files changed, 264 insertions(+)
 create mode 100644 arch/x86/mm/gup.c

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6b2debfabdd..6bdde845818 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -22,6 +22,7 @@ config X86
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_IOREMAP_PROT
+	select HAVE_GET_USER_PAGES_FAST
 	select HAVE_KPROBES
 	select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X
 	select HAVE_KRETPROBES
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 1fbb844c3d7..2977ea37791 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,6 +1,7 @@
 obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 	    pat.o pgtable.o
 
+obj-$(CONFIG_HAVE_GET_USER_PAGES_FAST) += gup.o
 obj-$(CONFIG_X86_32)		+= pgtable_32.o
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
new file mode 100644
index 00000000000..6f733121f32
--- /dev/null
+++ b/arch/x86/mm/gup.c
@@ -0,0 +1,258 @@
+/*
+ * Lockless get_user_pages_fast for x86
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/vmstat.h>
+#include <linux/highmem.h>
+
+#include <asm/pgtable.h>
+
+static inline pte_t gup_get_pte(pte_t *ptep)
+{
+#ifndef CONFIG_X86_PAE
+	return *ptep;
+#else
+	/*
+	 * With get_user_pages_fast, we walk down the pagetables without taking
+	 * any locks.  For this we would like to load the pointers atoimcally,
+	 * but that is not possible (without expensive cmpxchg8b) on PAE.  What
+	 * we do have is the guarantee that a pte will only either go from not
+	 * present to present, or present to not present or both -- it will not
+	 * switch to a completely different present page without a TLB flush in
+	 * between; something that we are blocking by holding interrupts off.
+	 *
+	 * Setting ptes from not present to present goes:
+	 * ptep->pte_high = h;
+	 * smp_wmb();
+	 * ptep->pte_low = l;
+	 *
+	 * And present to not present goes:
+	 * ptep->pte_low = 0;
+	 * smp_wmb();
+	 * ptep->pte_high = 0;
+	 *
+	 * We must ensure here that the load of pte_low sees l iff pte_high
+	 * sees h. We load pte_high *after* loading pte_low, which ensures we
+	 * don't see an older value of pte_high.  *Then* we recheck pte_low,
+	 * which ensures that we haven't picked up a changed pte high. We might
+	 * have got rubbish values from pte_low and pte_high, but we are
+	 * guaranteed that pte_low will not have the present bit set *unless*
+	 * it is 'l'. And get_user_pages_fast only operates on present ptes, so
+	 * we're safe.
+	 *
+	 * gup_get_pte should not be used or copied outside gup.c without being
+	 * very careful -- it does not atomically load the pte or anything that
+	 * is likely to be useful for you.
+	 */
+	pte_t pte;
+
+retry:
+	pte.pte_low = ptep->pte_low;
+	smp_rmb();
+	pte.pte_high = ptep->pte_high;
+	smp_rmb();
+	if (unlikely(pte.pte_low != ptep->pte_low))
+		goto retry;
+
+	return pte;
+#endif
+}
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t *ptep;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+
+	ptep = pte_offset_map(&pmd, addr);
+	do {
+		pte_t pte = gup_get_pte(ptep);
+		struct page *page;
+
+		if ((pte_val(pte) & (mask | _PAGE_SPECIAL)) != mask) {
+			pte_unmap(ptep);
+			return 0;
+		}
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		get_page(page);
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+	pte_unmap(ptep - 1);
+
+	return 1;
+}
+
+static inline void get_head_page_multiple(struct page *page, int nr)
+{
+	VM_BUG_ON(page != compound_head(page));
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(nr, &page->_count);
+}
+
+static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pmd;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~HPAGE_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (unlikely(pmd_large(pmd))) {
+			if (!gup_huge_pmd(pmd, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+				return 0;
+		}
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+			int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+			return 0;
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long end = start + (nr_pages << PAGE_SHIFT);
+	unsigned long addr = start;
+	unsigned long next;
+	pgd_t *pgdp;
+	int nr = 0;
+
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, nr_pages*PAGE_SIZE)))
+		goto slow_irqon;
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables and pages from being freed on x86.
+	 *
+	 * So long as we atomically load page table pointers versus teardown
+	 * (which we do on x86, with the above PAE exception), we can follow the
+	 * address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd_t pgd = *pgdp;
+
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			goto slow;
+		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+			goto slow;
+	} while (pgdp++, addr = next, addr != end);
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/include/asm-x86/uaccess.h b/include/asm-x86/uaccess.h
index f6fa4d841bb..5f702d1d521 100644
--- a/include/asm-x86/uaccess.h
+++ b/include/asm-x86/uaccess.h
@@ -451,3 +451,4 @@ extern struct movsl_mask {
 #endif
 
 #endif
+
diff --git a/mm/Kconfig b/mm/Kconfig
index aa799007a11..efee5d379df 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -77,6 +77,9 @@ config FLAT_NODE_MEM_MAP
 	def_bool y
 	depends on !SPARSEMEM
 
+config HAVE_GET_USER_PAGES_FAST
+	bool
+
 #
 # Both the NUMA code and DISCONTIGMEM use arrays of pg_data_t's
 # to represent different areas of memory.  This variable allows
-- 
cgit v1.2.3


From f5dd33c494a427b1d1a3b574de5c9e511c888864 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:25 -0700
Subject: dio: use get_user_pages_fast

Use get_user_pages_fast in the common/generic block and fs direct IO paths.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/bio.c       |  8 ++------
 fs/direct-io.c | 10 ++--------
 2 files changed, 4 insertions(+), 14 deletions(-)

diff --git a/fs/bio.c b/fs/bio.c
index 88322b066ac..25f1af0d81e 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -721,12 +721,8 @@ static struct bio *__bio_map_user_iov(struct request_queue *q,
 		const int local_nr_pages = end - start;
 		const int page_limit = cur_page + local_nr_pages;
 		
-		down_read(&current->mm->mmap_sem);
-		ret = get_user_pages(current, current->mm, uaddr,
-				     local_nr_pages,
-				     write_to_vm, 0, &pages[cur_page], NULL);
-		up_read(&current->mm->mmap_sem);
-
+		ret = get_user_pages_fast(uaddr, local_nr_pages,
+				write_to_vm, &pages[cur_page]);
 		if (ret < local_nr_pages) {
 			ret = -EFAULT;
 			goto out_unmap;
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 9e81addbd6e..9606ee848fd 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -150,17 +150,11 @@ static int dio_refill_pages(struct dio *dio)
 	int nr_pages;
 
 	nr_pages = min(dio->total_pages - dio->curr_page, DIO_PAGES);
-	down_read(&current->mm->mmap_sem);
-	ret = get_user_pages(
-		current,			/* Task for fault acounting */
-		current->mm,			/* whose pages? */
+	ret = get_user_pages_fast(
 		dio->curr_user_address,		/* Where from? */
 		nr_pages,			/* How many pages? */
 		dio->rw == READ,		/* Write to memory? */
-		0,				/* force (?) */
-		&dio->pages[0],
-		NULL);				/* vmas */
-	up_read(&current->mm->mmap_sem);
+		&dio->pages[0]);		/* Put results here */
 
 	if (ret < 0 && dio->blocks_available && (dio->rw & WRITE)) {
 		struct page *page = ZERO_PAGE(0);
-- 
cgit v1.2.3


From bc40d73c950146725e9e768e856a416ec8949065 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:26 -0700
Subject: splice: use get_user_pages_fast

Use get_user_pages_fast in splice.  This reverts some mmap_sem batching
there, however the biggest problem with mmap_sem tends to be hold times
blocking out other threads rather than cacheline bouncing.  Further: on
architectures that implement get_user_pages_fast without locks, mmap_sem
can be avoided completely anyway.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/splice.c | 41 +++--------------------------------------
 1 file changed, 3 insertions(+), 38 deletions(-)

diff --git a/fs/splice.c b/fs/splice.c
index 399442179d8..47dc1a445d1 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1160,36 +1160,6 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 	return -EINVAL;
 }
 
-/*
- * Do a copy-from-user while holding the mmap_semaphore for reading, in a
- * manner safe from deadlocking with simultaneous mmap() (grabbing mmap_sem
- * for writing) and page faulting on the user memory pointed to by src.
- * This assumes that we will very rarely hit the partial != 0 path, or this
- * will not be a win.
- */
-static int copy_from_user_mmap_sem(void *dst, const void __user *src, size_t n)
-{
-	int partial;
-
-	if (!access_ok(VERIFY_READ, src, n))
-		return -EFAULT;
-
-	pagefault_disable();
-	partial = __copy_from_user_inatomic(dst, src, n);
-	pagefault_enable();
-
-	/*
-	 * Didn't copy everything, drop the mmap_sem and do a faulting copy
-	 */
-	if (unlikely(partial)) {
-		up_read(&current->mm->mmap_sem);
-		partial = copy_from_user(dst, src, n);
-		down_read(&current->mm->mmap_sem);
-	}
-
-	return partial;
-}
-
 /*
  * Map an iov into an array of pages and offset/length tupples. With the
  * partial_page structure, we can map several non-contiguous ranges into
@@ -1203,8 +1173,6 @@ static int get_iovec_page_array(const struct iovec __user *iov,
 {
 	int buffers = 0, error = 0;
 
-	down_read(&current->mm->mmap_sem);
-
 	while (nr_vecs) {
 		unsigned long off, npages;
 		struct iovec entry;
@@ -1213,7 +1181,7 @@ static int get_iovec_page_array(const struct iovec __user *iov,
 		int i;
 
 		error = -EFAULT;
-		if (copy_from_user_mmap_sem(&entry, iov, sizeof(entry)))
+		if (copy_from_user(&entry, iov, sizeof(entry)))
 			break;
 
 		base = entry.iov_base;
@@ -1247,9 +1215,8 @@ static int get_iovec_page_array(const struct iovec __user *iov,
 		if (npages > PIPE_BUFFERS - buffers)
 			npages = PIPE_BUFFERS - buffers;
 
-		error = get_user_pages(current, current->mm,
-				       (unsigned long) base, npages, 0, 0,
-				       &pages[buffers], NULL);
+		error = get_user_pages_fast((unsigned long)base, npages,
+					0, &pages[buffers]);
 
 		if (unlikely(error <= 0))
 			break;
@@ -1288,8 +1255,6 @@ static int get_iovec_page_array(const struct iovec __user *iov,
 		iov++;
 	}
 
-	up_read(&current->mm->mmap_sem);
-
 	if (buffers)
 		return buffers;
 
-- 
cgit v1.2.3


From 652ea695364142b2464744746beac206d050ef19 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:27 -0700
Subject: x86: support 1GB hugepages with get_user_pages_lockless()

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/gup.c | 43 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 6f733121f32..3085f25b435 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -124,7 +124,7 @@ static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
 
 	refs = 0;
 	head = pte_page(pte);
-	page = head + ((addr & ~HPAGE_MASK) >> PAGE_SHIFT);
+	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
 	do {
 		VM_BUG_ON(compound_head(page) != head);
 		pages[*nr] = page;
@@ -162,6 +162,38 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
 	return 1;
 }
 
+static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pud;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
 static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
 			int write, struct page **pages, int *nr)
 {
@@ -175,8 +207,13 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
 		next = pud_addr_end(addr, end);
 		if (pud_none(pud))
 			return 0;
-		if (!gup_pmd_range(pud, addr, next, write, pages, nr))
-			return 0;
+		if (unlikely(pud_large(pud))) {
+			if (!gup_huge_pud(pud, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+				return 0;
+		}
 	} while (pudp++, addr = next, addr != end);
 
 	return 1;
-- 
cgit v1.2.3


From 30002ed2e41830ec03ec3e577ad83ac6b188f96e Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:28 -0700
Subject: mm: readahead scan lockless

radix_tree_next_hole() is implemented as a series of radix_tree_lookup()s.
So it can be called locklessly, under rcu_read_lock().

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/readahead.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/mm/readahead.c b/mm/readahead.c
index d8723a5f649..77e8ddf945e 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -382,9 +382,9 @@ ondemand_readahead(struct address_space *mapping,
 	if (hit_readahead_marker) {
 		pgoff_t start;
 
-		read_lock_irq(&mapping->tree_lock);
-		start = radix_tree_next_hole(&mapping->page_tree, offset, max+1);
-		read_unlock_irq(&mapping->tree_lock);
+		rcu_read_lock();
+		start = radix_tree_next_hole(&mapping->page_tree, offset,max+1);
+		rcu_read_unlock();
 
 		if (!start || start - offset > max)
 			return 0;
-- 
cgit v1.2.3


From 47feff2c8eefe85099f87c43d3096855f0085ca0 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:29 -0700
Subject: radix-tree: add gang_lookup_slot, gang_lookup_slot_tag

Introduce gang_lookup_slot() and gang_lookup_slot_tag() functions, which
are used by lockless pagecache.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/radix-tree.h |  12 ++-
 lib/radix-tree.c           | 178 +++++++++++++++++++++++++++++++++++++++------
 2 files changed, 166 insertions(+), 24 deletions(-)

diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index b8ce2b444bb..a916c6660df 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -99,12 +99,15 @@ do {									\
  *
  * The notable exceptions to this rule are the following functions:
  * radix_tree_lookup
+ * radix_tree_lookup_slot
  * radix_tree_tag_get
  * radix_tree_gang_lookup
+ * radix_tree_gang_lookup_slot
  * radix_tree_gang_lookup_tag
+ * radix_tree_gang_lookup_tag_slot
  * radix_tree_tagged
  *
- * The first 4 functions are able to be called locklessly, using RCU. The
+ * The first 7 functions are able to be called locklessly, using RCU. The
  * caller must ensure calls to these functions are made within rcu_read_lock()
  * regions. Other readers (lock-free or otherwise) and modifications may be
  * running concurrently.
@@ -159,6 +162,9 @@ void *radix_tree_delete(struct radix_tree_root *, unsigned long);
 unsigned int
 radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 			unsigned long first_index, unsigned int max_items);
+unsigned int
+radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results,
+			unsigned long first_index, unsigned int max_items);
 unsigned long radix_tree_next_hole(struct radix_tree_root *root,
 				unsigned long index, unsigned long max_scan);
 int radix_tree_preload(gfp_t gfp_mask);
@@ -173,6 +179,10 @@ unsigned int
 radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 		unsigned long first_index, unsigned int max_items,
 		unsigned int tag);
+unsigned int
+radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
+		unsigned long first_index, unsigned int max_items,
+		unsigned int tag);
 int radix_tree_tagged(struct radix_tree_root *root, unsigned int tag);
 
 static inline void radix_tree_preload_end(void)
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 56ec21a7f73..9c4f1ffa286 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -359,18 +359,17 @@ EXPORT_SYMBOL(radix_tree_insert);
  *	Returns:  the slot corresponding to the position @index in the
  *	radix tree @root. This is useful for update-if-exists operations.
  *
- *	This function cannot be called under rcu_read_lock, it must be
- *	excluded from writers, as must the returned slot for subsequent
- *	use by radix_tree_deref_slot() and radix_tree_replace slot.
- *	Caller must hold tree write locked across slot lookup and
- *	replace.
+ *	This function can be called under rcu_read_lock iff the slot is not
+ *	modified by radix_tree_replace_slot, otherwise it must be called
+ *	exclusive from other writers. Any dereference of the slot must be done
+ *	using radix_tree_deref_slot.
  */
 void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
 {
 	unsigned int height, shift;
 	struct radix_tree_node *node, **slot;
 
-	node = root->rnode;
+	node = rcu_dereference(root->rnode);
 	if (node == NULL)
 		return NULL;
 
@@ -390,7 +389,7 @@ void **radix_tree_lookup_slot(struct radix_tree_root *root, unsigned long index)
 	do {
 		slot = (struct radix_tree_node **)
 			(node->slots + ((index>>shift) & RADIX_TREE_MAP_MASK));
-		node = *slot;
+		node = rcu_dereference(*slot);
 		if (node == NULL)
 			return NULL;
 
@@ -667,7 +666,7 @@ unsigned long radix_tree_next_hole(struct radix_tree_root *root,
 EXPORT_SYMBOL(radix_tree_next_hole);
 
 static unsigned int
-__lookup(struct radix_tree_node *slot, void **results, unsigned long index,
+__lookup(struct radix_tree_node *slot, void ***results, unsigned long index,
 	unsigned int max_items, unsigned long *next_index)
 {
 	unsigned int nr_found = 0;
@@ -701,11 +700,9 @@ __lookup(struct radix_tree_node *slot, void **results, unsigned long index,
 
 	/* Bottom level: grab some items */
 	for (i = index & RADIX_TREE_MAP_MASK; i < RADIX_TREE_MAP_SIZE; i++) {
-		struct radix_tree_node *node;
 		index++;
-		node = slot->slots[i];
-		if (node) {
-			results[nr_found++] = rcu_dereference(node);
+		if (slot->slots[i]) {
+			results[nr_found++] = &(slot->slots[i]);
 			if (nr_found == max_items)
 				goto out;
 		}
@@ -759,13 +756,22 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 
 	ret = 0;
 	while (ret < max_items) {
-		unsigned int nr_found;
+		unsigned int nr_found, slots_found, i;
 		unsigned long next_index;	/* Index of next search */
 
 		if (cur_index > max_index)
 			break;
-		nr_found = __lookup(node, results + ret, cur_index,
+		slots_found = __lookup(node, (void ***)results + ret, cur_index,
 					max_items - ret, &next_index);
+		nr_found = 0;
+		for (i = 0; i < slots_found; i++) {
+			struct radix_tree_node *slot;
+			slot = *(((void ***)results)[ret + i]);
+			if (!slot)
+				continue;
+			results[ret + nr_found] = rcu_dereference(slot);
+			nr_found++;
+		}
 		ret += nr_found;
 		if (next_index == 0)
 			break;
@@ -776,12 +782,71 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 }
 EXPORT_SYMBOL(radix_tree_gang_lookup);
 
+/**
+ *	radix_tree_gang_lookup_slot - perform multiple slot lookup on radix tree
+ *	@root:		radix tree root
+ *	@results:	where the results of the lookup are placed
+ *	@first_index:	start the lookup from this key
+ *	@max_items:	place up to this many items at *results
+ *
+ *	Performs an index-ascending scan of the tree for present items.  Places
+ *	their slots at *@results and returns the number of items which were
+ *	placed at *@results.
+ *
+ *	The implementation is naive.
+ *
+ *	Like radix_tree_gang_lookup as far as RCU and locking goes. Slots must
+ *	be dereferenced with radix_tree_deref_slot, and if using only RCU
+ *	protection, radix_tree_deref_slot may fail requiring a retry.
+ */
+unsigned int
+radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results,
+			unsigned long first_index, unsigned int max_items)
+{
+	unsigned long max_index;
+	struct radix_tree_node *node;
+	unsigned long cur_index = first_index;
+	unsigned int ret;
+
+	node = rcu_dereference(root->rnode);
+	if (!node)
+		return 0;
+
+	if (!radix_tree_is_indirect_ptr(node)) {
+		if (first_index > 0)
+			return 0;
+		results[0] = (void **)&root->rnode;
+		return 1;
+	}
+	node = radix_tree_indirect_to_ptr(node);
+
+	max_index = radix_tree_maxindex(node->height);
+
+	ret = 0;
+	while (ret < max_items) {
+		unsigned int slots_found;
+		unsigned long next_index;	/* Index of next search */
+
+		if (cur_index > max_index)
+			break;
+		slots_found = __lookup(node, results + ret, cur_index,
+					max_items - ret, &next_index);
+		ret += slots_found;
+		if (next_index == 0)
+			break;
+		cur_index = next_index;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(radix_tree_gang_lookup_slot);
+
 /*
  * FIXME: the two tag_get()s here should use find_next_bit() instead of
  * open-coding the search.
  */
 static unsigned int
-__lookup_tag(struct radix_tree_node *slot, void **results, unsigned long index,
+__lookup_tag(struct radix_tree_node *slot, void ***results, unsigned long index,
 	unsigned int max_items, unsigned long *next_index, unsigned int tag)
 {
 	unsigned int nr_found = 0;
@@ -811,11 +876,9 @@ __lookup_tag(struct radix_tree_node *slot, void **results, unsigned long index,
 			unsigned long j = index & RADIX_TREE_MAP_MASK;
 
 			for ( ; j < RADIX_TREE_MAP_SIZE; j++) {
-				struct radix_tree_node *node;
 				index++;
 				if (!tag_get(slot, tag, j))
 					continue;
-				node = slot->slots[j];
 				/*
 				 * Even though the tag was found set, we need to
 				 * recheck that we have a non-NULL node, because
@@ -826,9 +889,8 @@ __lookup_tag(struct radix_tree_node *slot, void **results, unsigned long index,
 				 * lookup ->slots[x] without a lock (ie. can't
 				 * rely on its value remaining the same).
 				 */
-				if (node) {
-					node = rcu_dereference(node);
-					results[nr_found++] = node;
+				if (slot->slots[j]) {
+					results[nr_found++] = &(slot->slots[j]);
 					if (nr_found == max_items)
 						goto out;
 				}
@@ -887,13 +949,22 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 
 	ret = 0;
 	while (ret < max_items) {
-		unsigned int nr_found;
+		unsigned int nr_found, slots_found, i;
 		unsigned long next_index;	/* Index of next search */
 
 		if (cur_index > max_index)
 			break;
-		nr_found = __lookup_tag(node, results + ret, cur_index,
-					max_items - ret, &next_index, tag);
+		slots_found = __lookup_tag(node, (void ***)results + ret,
+				cur_index, max_items - ret, &next_index, tag);
+		nr_found = 0;
+		for (i = 0; i < slots_found; i++) {
+			struct radix_tree_node *slot;
+			slot = *(((void ***)results)[ret + i]);
+			if (!slot)
+				continue;
+			results[ret + nr_found] = rcu_dereference(slot);
+			nr_found++;
+		}
 		ret += nr_found;
 		if (next_index == 0)
 			break;
@@ -904,6 +975,67 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 }
 EXPORT_SYMBOL(radix_tree_gang_lookup_tag);
 
+/**
+ *	radix_tree_gang_lookup_tag_slot - perform multiple slot lookup on a
+ *					  radix tree based on a tag
+ *	@root:		radix tree root
+ *	@results:	where the results of the lookup are placed
+ *	@first_index:	start the lookup from this key
+ *	@max_items:	place up to this many items at *results
+ *	@tag:		the tag index (< RADIX_TREE_MAX_TAGS)
+ *
+ *	Performs an index-ascending scan of the tree for present items which
+ *	have the tag indexed by @tag set.  Places the slots at *@results and
+ *	returns the number of slots which were placed at *@results.
+ */
+unsigned int
+radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
+		unsigned long first_index, unsigned int max_items,
+		unsigned int tag)
+{
+	struct radix_tree_node *node;
+	unsigned long max_index;
+	unsigned long cur_index = first_index;
+	unsigned int ret;
+
+	/* check the root's tag bit */
+	if (!root_tag_get(root, tag))
+		return 0;
+
+	node = rcu_dereference(root->rnode);
+	if (!node)
+		return 0;
+
+	if (!radix_tree_is_indirect_ptr(node)) {
+		if (first_index > 0)
+			return 0;
+		results[0] = (void **)&root->rnode;
+		return 1;
+	}
+	node = radix_tree_indirect_to_ptr(node);
+
+	max_index = radix_tree_maxindex(node->height);
+
+	ret = 0;
+	while (ret < max_items) {
+		unsigned int slots_found;
+		unsigned long next_index;	/* Index of next search */
+
+		if (cur_index > max_index)
+			break;
+		slots_found = __lookup_tag(node, results + ret,
+				cur_index, max_items - ret, &next_index, tag);
+		ret += slots_found;
+		if (next_index == 0)
+			break;
+		cur_index = next_index;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(radix_tree_gang_lookup_tag_slot);
+
+
 /**
  *	radix_tree_shrink    -    shrink height of a radix tree to minimal
  *	@root		radix tree root
-- 
cgit v1.2.3


From e286781d5f2e9c846e012a39653a166e9d31777d Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:30 -0700
Subject: mm: speculative page references

If we can be sure that elevating the page_count on a pagecache page will
pin it, we can speculatively run this operation, and subsequently check to
see if we hit the right page rather than relying on holding a lock or
otherwise pinning a reference to the page.

This can be done if get_page/put_page behaves consistently throughout the
whole tree (ie.  if we "get" the page after it has been used for something
else, we must be able to free it with a put_page).

Actually, there is a period where the count behaves differently: when the
page is free or if it is a constituent page of a compound page.  We need
an atomic_inc_not_zero operation to ensure we don't try to grab the page
in either case.

This patch introduces the core locking protocol to the pagecache (ie.
adds page_cache_get_speculative, and tweaks some update-side code to make
it work).

Thanks to Hugh for pointing out an improvement to the algorithm setting
page_count to zero when we have control of all references, in order to
hold off speculative getters.

[kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()]
[hugh@veritas.com: fix add_to_page_cache]
[akpm@linux-foundation.org: repair a comment]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/cassini.c   |  12 ++++++
 include/linux/pagemap.h | 111 +++++++++++++++++++++++++++++++++++++++++++++++-
 mm/filemap.c            |  32 ++++++++------
 mm/migrate.c            |  20 ++++++++-
 mm/shmem.c              |   6 +--
 mm/swap_state.c         |  17 +++++---
 mm/vmscan.c             |  74 +++++++++++++++++++++++---------
 7 files changed, 227 insertions(+), 45 deletions(-)

diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 83768df2780..f1936d51b45 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -576,6 +576,18 @@ static void cas_spare_recover(struct cas *cp, const gfp_t flags)
 	list_for_each_safe(elem, tmp, &list) {
 		cas_page_t *page = list_entry(elem, cas_page_t, list);
 
+		/*
+		 * With the lockless pagecache, cassini buffering scheme gets
+		 * slightly less accurate: we might find that a page has an
+		 * elevated reference count here, due to a speculative ref,
+		 * and skip it as in-use. Ideally we would be able to reclaim
+		 * it. However this would be such a rare case, it doesn't
+		 * matter too much as we should pick it up the next time round.
+		 *
+		 * Importantly, if we find that the page has a refcount of 1
+		 * here (our refcount), then we know it is definitely not inuse
+		 * so we can reuse it.
+		 */
 		if (page_count(page->buffer) > 1)
 			continue;
 
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index ee1ec2c7723..a81d8189042 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -12,6 +12,7 @@
 #include <asm/uaccess.h>
 #include <linux/gfp.h>
 #include <linux/bitops.h>
+#include <linux/hardirq.h> /* for in_interrupt() */
 
 /*
  * Bits in mapping->flags.  The lower __GFP_BITS_SHIFT bits are the page
@@ -62,6 +63,98 @@ static inline void mapping_set_gfp_mask(struct address_space *m, gfp_t mask)
 #define page_cache_release(page)	put_page(page)
 void release_pages(struct page **pages, int nr, int cold);
 
+/*
+ * speculatively take a reference to a page.
+ * If the page is free (_count == 0), then _count is untouched, and 0
+ * is returned. Otherwise, _count is incremented by 1 and 1 is returned.
+ *
+ * This function must be called inside the same rcu_read_lock() section as has
+ * been used to lookup the page in the pagecache radix-tree (or page table):
+ * this allows allocators to use a synchronize_rcu() to stabilize _count.
+ *
+ * Unless an RCU grace period has passed, the count of all pages coming out
+ * of the allocator must be considered unstable. page_count may return higher
+ * than expected, and put_page must be able to do the right thing when the
+ * page has been finished with, no matter what it is subsequently allocated
+ * for (because put_page is what is used here to drop an invalid speculative
+ * reference).
+ *
+ * This is the interesting part of the lockless pagecache (and lockless
+ * get_user_pages) locking protocol, where the lookup-side (eg. find_get_page)
+ * has the following pattern:
+ * 1. find page in radix tree
+ * 2. conditionally increment refcount
+ * 3. check the page is still in pagecache (if no, goto 1)
+ *
+ * Remove-side that cares about stability of _count (eg. reclaim) has the
+ * following (with tree_lock held for write):
+ * A. atomically check refcount is correct and set it to 0 (atomic_cmpxchg)
+ * B. remove page from pagecache
+ * C. free the page
+ *
+ * There are 2 critical interleavings that matter:
+ * - 2 runs before A: in this case, A sees elevated refcount and bails out
+ * - A runs before 2: in this case, 2 sees zero refcount and retries;
+ *   subsequently, B will complete and 1 will find no page, causing the
+ *   lookup to return NULL.
+ *
+ * It is possible that between 1 and 2, the page is removed then the exact same
+ * page is inserted into the same position in pagecache. That's OK: the
+ * old find_get_page using tree_lock could equally have run before or after
+ * such a re-insertion, depending on order that locks are granted.
+ *
+ * Lookups racing against pagecache insertion isn't a big problem: either 1
+ * will find the page or it will not. Likewise, the old find_get_page could run
+ * either before the insertion or afterwards, depending on timing.
+ */
+static inline int page_cache_get_speculative(struct page *page)
+{
+	VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+	VM_BUG_ON(!in_atomic());
+# endif
+	/*
+	 * Preempt must be disabled here - we rely on rcu_read_lock doing
+	 * this for us.
+	 *
+	 * Pagecache won't be truncated from interrupt context, so if we have
+	 * found a page in the radix tree here, we have pinned its refcount by
+	 * disabling preempt, and hence no need for the "speculative get" that
+	 * SMP requires.
+	 */
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_inc(&page->_count);
+
+#else
+	if (unlikely(!get_page_unless_zero(page))) {
+		/*
+		 * Either the page has been freed, or will be freed.
+		 * In either case, retry here and the caller should
+		 * do the right thing (see comments above).
+		 */
+		return 0;
+	}
+#endif
+	VM_BUG_ON(PageTail(page));
+
+	return 1;
+}
+
+static inline int page_freeze_refs(struct page *page, int count)
+{
+	return likely(atomic_cmpxchg(&page->_count, count, 0) == count);
+}
+
+static inline void page_unfreeze_refs(struct page *page, int count)
+{
+	VM_BUG_ON(page_count(page) != 0);
+	VM_BUG_ON(count == 0);
+
+	atomic_set(&page->_count, count);
+}
+
 #ifdef CONFIG_NUMA
 extern struct page *__page_cache_alloc(gfp_t gfp);
 #else
@@ -133,13 +226,29 @@ static inline struct page *read_mapping_page(struct address_space *mapping,
 	return read_cache_page(mapping, index, filler, data);
 }
 
-int add_to_page_cache(struct page *page, struct address_space *mapping,
+int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
 				pgoff_t index, gfp_t gfp_mask);
 int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
 				pgoff_t index, gfp_t gfp_mask);
 extern void remove_from_page_cache(struct page *page);
 extern void __remove_from_page_cache(struct page *page);
 
+/*
+ * Like add_to_page_cache_locked, but used to add newly allocated pages:
+ * the page is new, so we can just run SetPageLocked() against it.
+ */
+static inline int add_to_page_cache(struct page *page,
+		struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask)
+{
+	int error;
+
+	SetPageLocked(page);
+	error = add_to_page_cache_locked(page, mapping, offset, gfp_mask);
+	if (unlikely(error))
+		ClearPageLocked(page);
+	return error;
+}
+
 /*
  * Return byte-offset into filesystem object for page.
  */
diff --git a/mm/filemap.c b/mm/filemap.c
index 2d3ec1ffc66..4e182a9a14c 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -442,39 +442,43 @@ int filemap_write_and_wait_range(struct address_space *mapping,
 }
 
 /**
- * add_to_page_cache - add newly allocated pagecache pages
+ * add_to_page_cache_locked - add a locked page to the pagecache
  * @page:	page to add
  * @mapping:	the page's address_space
  * @offset:	page index
  * @gfp_mask:	page allocation mode
  *
- * This function is used to add newly allocated pagecache pages;
- * the page is new, so we can just run SetPageLocked() against it.
- * The other page state flags were set by rmqueue().
- *
+ * This function is used to add a page to the pagecache. It must be locked.
  * This function does not add the page to the LRU.  The caller must do that.
  */
-int add_to_page_cache(struct page *page, struct address_space *mapping,
+int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
 		pgoff_t offset, gfp_t gfp_mask)
 {
-	int error = mem_cgroup_cache_charge(page, current->mm,
+	int error;
+
+	VM_BUG_ON(!PageLocked(page));
+
+	error = mem_cgroup_cache_charge(page, current->mm,
 					gfp_mask & ~__GFP_HIGHMEM);
 	if (error)
 		goto out;
 
 	error = radix_tree_preload(gfp_mask & ~__GFP_HIGHMEM);
 	if (error == 0) {
+		page_cache_get(page);
+		page->mapping = mapping;
+		page->index = offset;
+
 		write_lock_irq(&mapping->tree_lock);
 		error = radix_tree_insert(&mapping->page_tree, offset, page);
-		if (!error) {
-			page_cache_get(page);
-			SetPageLocked(page);
-			page->mapping = mapping;
-			page->index = offset;
+		if (likely(!error)) {
 			mapping->nrpages++;
 			__inc_zone_page_state(page, NR_FILE_PAGES);
-		} else
+		} else {
+			page->mapping = NULL;
 			mem_cgroup_uncharge_cache_page(page);
+			page_cache_release(page);
+		}
 
 		write_unlock_irq(&mapping->tree_lock);
 		radix_tree_preload_end();
@@ -483,7 +487,7 @@ int add_to_page_cache(struct page *page, struct address_space *mapping,
 out:
 	return error;
 }
-EXPORT_SYMBOL(add_to_page_cache);
+EXPORT_SYMBOL(add_to_page_cache_locked);
 
 int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
 				pgoff_t offset, gfp_t gfp_mask)
diff --git a/mm/migrate.c b/mm/migrate.c
index d8c65a65c61..3ca6392e82c 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -285,7 +285,15 @@ void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
 
 	page = migration_entry_to_page(entry);
 
-	get_page(page);
+	/*
+	 * Once radix-tree replacement of page migration started, page_count
+	 * *must* be zero. And, we don't want to call wait_on_page_locked()
+	 * against a page without get_page().
+	 * So, we use get_page_unless_zero(), here. Even failed, page fault
+	 * will occur again.
+	 */
+	if (!get_page_unless_zero(page))
+		goto out;
 	pte_unmap_unlock(ptep, ptl);
 	wait_on_page_locked(page);
 	put_page(page);
@@ -305,6 +313,7 @@ out:
 static int migrate_page_move_mapping(struct address_space *mapping,
 		struct page *newpage, struct page *page)
 {
+	int expected_count;
 	void **pslot;
 
 	if (!mapping) {
@@ -319,12 +328,18 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 	pslot = radix_tree_lookup_slot(&mapping->page_tree,
  					page_index(page));
 
-	if (page_count(page) != 2 + !!PagePrivate(page) ||
+	expected_count = 2 + !!PagePrivate(page);
+	if (page_count(page) != expected_count ||
 			(struct page *)radix_tree_deref_slot(pslot) != page) {
 		write_unlock_irq(&mapping->tree_lock);
 		return -EAGAIN;
 	}
 
+	if (!page_freeze_refs(page, expected_count)) {
+		write_unlock_irq(&mapping->tree_lock);
+		return -EAGAIN;
+	}
+
 	/*
 	 * Now we know that no one else is looking at the page.
 	 */
@@ -338,6 +353,7 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 
 	radix_tree_replace_slot(pslot, newpage);
 
+	page_unfreeze_refs(page, expected_count);
 	/*
 	 * Drop cache reference from old page.
 	 * We know this isn't the last reference.
diff --git a/mm/shmem.c b/mm/shmem.c
index f92fea94d03..1089092aeca 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -936,7 +936,7 @@ found:
 	spin_lock(&info->lock);
 	ptr = shmem_swp_entry(info, idx, NULL);
 	if (ptr && ptr->val == entry.val) {
-		error = add_to_page_cache(page, inode->i_mapping,
+		error = add_to_page_cache_locked(page, inode->i_mapping,
 						idx, GFP_NOWAIT);
 		/* does mem_cgroup_uncharge_cache_page on error */
 	} else	/* we must compensate for our precharge above */
@@ -1301,8 +1301,8 @@ repeat:
 			SetPageUptodate(filepage);
 			set_page_dirty(filepage);
 			swap_free(swap);
-		} else if (!(error = add_to_page_cache(
-				swappage, mapping, idx, GFP_NOWAIT))) {
+		} else if (!(error = add_to_page_cache_locked(swappage, mapping,
+					idx, GFP_NOWAIT))) {
 			info->flags |= SHMEM_PAGEIN;
 			shmem_swp_set(info, entry, 0);
 			shmem_swp_unmap(entry);
diff --git a/mm/swap_state.c b/mm/swap_state.c
index d8aadaf2a0b..3e3381d6c7e 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -64,7 +64,7 @@ void show_swap_cache_info(void)
 }
 
 /*
- * add_to_swap_cache resembles add_to_page_cache on swapper_space,
+ * add_to_swap_cache resembles add_to_page_cache_locked on swapper_space,
  * but sets SwapCache flag and private instead of mapping and index.
  */
 int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask)
@@ -76,19 +76,26 @@ int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask)
 	BUG_ON(PagePrivate(page));
 	error = radix_tree_preload(gfp_mask);
 	if (!error) {
+		page_cache_get(page);
+		SetPageSwapCache(page);
+		set_page_private(page, entry.val);
+
 		write_lock_irq(&swapper_space.tree_lock);
 		error = radix_tree_insert(&swapper_space.page_tree,
 						entry.val, page);
-		if (!error) {
-			page_cache_get(page);
-			SetPageSwapCache(page);
-			set_page_private(page, entry.val);
+		if (likely(!error)) {
 			total_swapcache_pages++;
 			__inc_zone_page_state(page, NR_FILE_PAGES);
 			INC_CACHE_INFO(add_total);
 		}
 		write_unlock_irq(&swapper_space.tree_lock);
 		radix_tree_preload_end();
+
+		if (unlikely(error)) {
+			set_page_private(page, 0UL);
+			ClearPageSwapCache(page);
+			page_cache_release(page);
+		}
 	}
 	return error;
 }
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 26672c6cd3c..0075eac1cd0 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -391,12 +391,10 @@ static pageout_t pageout(struct page *page, struct address_space *mapping,
 }
 
 /*
- * Attempt to detach a locked page from its ->mapping.  If it is dirty or if
- * someone else has a ref on the page, abort and return 0.  If it was
- * successfully detached, return 1.  Assumes the caller has a single ref on
- * this page.
+ * Same as remove_mapping, but if the page is removed from the mapping, it
+ * gets returned with a refcount of 0.
  */
-int remove_mapping(struct address_space *mapping, struct page *page)
+static int __remove_mapping(struct address_space *mapping, struct page *page)
 {
 	BUG_ON(!PageLocked(page));
 	BUG_ON(mapping != page_mapping(page));
@@ -427,24 +425,24 @@ int remove_mapping(struct address_space *mapping, struct page *page)
 	 * Note that if SetPageDirty is always performed via set_page_dirty,
 	 * and thus under tree_lock, then this ordering is not required.
 	 */
-	if (unlikely(page_count(page) != 2))
+	if (!page_freeze_refs(page, 2))
 		goto cannot_free;
-	smp_rmb();
-	if (unlikely(PageDirty(page)))
+	/* note: atomic_cmpxchg in page_freeze_refs provides the smp_rmb */
+	if (unlikely(PageDirty(page))) {
+		page_unfreeze_refs(page, 2);
 		goto cannot_free;
+	}
 
 	if (PageSwapCache(page)) {
 		swp_entry_t swap = { .val = page_private(page) };
 		__delete_from_swap_cache(page);
 		write_unlock_irq(&mapping->tree_lock);
 		swap_free(swap);
-		__put_page(page);	/* The pagecache ref */
-		return 1;
+	} else {
+		__remove_from_page_cache(page);
+		write_unlock_irq(&mapping->tree_lock);
 	}
 
-	__remove_from_page_cache(page);
-	write_unlock_irq(&mapping->tree_lock);
-	__put_page(page);
 	return 1;
 
 cannot_free:
@@ -452,6 +450,26 @@ cannot_free:
 	return 0;
 }
 
+/*
+ * Attempt to detach a locked page from its ->mapping.  If it is dirty or if
+ * someone else has a ref on the page, abort and return 0.  If it was
+ * successfully detached, return 1.  Assumes the caller has a single ref on
+ * this page.
+ */
+int remove_mapping(struct address_space *mapping, struct page *page)
+{
+	if (__remove_mapping(mapping, page)) {
+		/*
+		 * Unfreezing the refcount with 1 rather than 2 effectively
+		 * drops the pagecache ref for us without requiring another
+		 * atomic operation.
+		 */
+		page_unfreeze_refs(page, 1);
+		return 1;
+	}
+	return 0;
+}
+
 /*
  * shrink_page_list() returns the number of reclaimed pages
  */
@@ -598,18 +616,34 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 		if (PagePrivate(page)) {
 			if (!try_to_release_page(page, sc->gfp_mask))
 				goto activate_locked;
-			if (!mapping && page_count(page) == 1)
-				goto free_it;
+			if (!mapping && page_count(page) == 1) {
+				unlock_page(page);
+				if (put_page_testzero(page))
+					goto free_it;
+				else {
+					/*
+					 * rare race with speculative reference.
+					 * the speculative reference will free
+					 * this page shortly, so we may
+					 * increment nr_reclaimed here (and
+					 * leave it off the LRU).
+					 */
+					nr_reclaimed++;
+					continue;
+				}
+			}
 		}
 
-		if (!mapping || !remove_mapping(mapping, page))
+		if (!mapping || !__remove_mapping(mapping, page))
 			goto keep_locked;
 
-free_it:
 		unlock_page(page);
+free_it:
 		nr_reclaimed++;
-		if (!pagevec_add(&freed_pvec, page))
-			__pagevec_release_nonlru(&freed_pvec);
+		if (!pagevec_add(&freed_pvec, page)) {
+			__pagevec_free(&freed_pvec);
+			pagevec_reinit(&freed_pvec);
+		}
 		continue;
 
 activate_locked:
@@ -623,7 +657,7 @@ keep:
 	}
 	list_splice(&ret_pages, page_list);
 	if (pagevec_count(&freed_pvec))
-		__pagevec_release_nonlru(&freed_pvec);
+		__pagevec_free(&freed_pvec);
 	count_vm_events(PGACTIVATE, pgactivate);
 	return nr_reclaimed;
 }
-- 
cgit v1.2.3


From a60637c85893e7191faaafa6a72e197c24386727 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:31 -0700
Subject: mm: lockless pagecache

Combine page_cache_get_speculative with lockless radix tree lookups to
introduce lockless page cache lookups (ie.  no mapping->tree_lock on the
read-side).

The only atomicity changes this introduces is that the gang pagecache
lookup functions now behave as if they are implemented with multiple
find_get_page calls, rather than operating on a snapshot of the pages.  In
practice, this atomicity guarantee is not used anyway, and it is to
replace individual lookups, so these semantics are natural.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/filemap.c | 179 ++++++++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 134 insertions(+), 45 deletions(-)

diff --git a/mm/filemap.c b/mm/filemap.c
index 4e182a9a14c..feb8448d861 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -637,15 +637,35 @@ void __lock_page_nosync(struct page *page)
  * Is there a pagecache struct page at the given (mapping, offset) tuple?
  * If yes, increment its refcount and return it; if no, return NULL.
  */
-struct page * find_get_page(struct address_space *mapping, pgoff_t offset)
+struct page *find_get_page(struct address_space *mapping, pgoff_t offset)
 {
+	void **pagep;
 	struct page *page;
 
-	read_lock_irq(&mapping->tree_lock);
-	page = radix_tree_lookup(&mapping->page_tree, offset);
-	if (page)
-		page_cache_get(page);
-	read_unlock_irq(&mapping->tree_lock);
+	rcu_read_lock();
+repeat:
+	page = NULL;
+	pagep = radix_tree_lookup_slot(&mapping->page_tree, offset);
+	if (pagep) {
+		page = radix_tree_deref_slot(pagep);
+		if (unlikely(!page || page == RADIX_TREE_RETRY))
+			goto repeat;
+
+		if (!page_cache_get_speculative(page))
+			goto repeat;
+
+		/*
+		 * Has the page moved?
+		 * This is part of the lockless pagecache protocol. See
+		 * include/linux/pagemap.h for details.
+		 */
+		if (unlikely(page != *pagep)) {
+			page_cache_release(page);
+			goto repeat;
+		}
+	}
+	rcu_read_unlock();
+
 	return page;
 }
 EXPORT_SYMBOL(find_get_page);
@@ -660,32 +680,22 @@ EXPORT_SYMBOL(find_get_page);
  *
  * Returns zero if the page was not present. find_lock_page() may sleep.
  */
-struct page *find_lock_page(struct address_space *mapping,
-				pgoff_t offset)
+struct page *find_lock_page(struct address_space *mapping, pgoff_t offset)
 {
 	struct page *page;
 
 repeat:
-	read_lock_irq(&mapping->tree_lock);
-	page = radix_tree_lookup(&mapping->page_tree, offset);
+	page = find_get_page(mapping, offset);
 	if (page) {
-		page_cache_get(page);
-		if (TestSetPageLocked(page)) {
-			read_unlock_irq(&mapping->tree_lock);
-			__lock_page(page);
-
-			/* Has the page been truncated while we slept? */
-			if (unlikely(page->mapping != mapping)) {
-				unlock_page(page);
-				page_cache_release(page);
-				goto repeat;
-			}
-			VM_BUG_ON(page->index != offset);
-			goto out;
+		lock_page(page);
+		/* Has the page been truncated? */
+		if (unlikely(page->mapping != mapping)) {
+			unlock_page(page);
+			page_cache_release(page);
+			goto repeat;
 		}
+		VM_BUG_ON(page->index != offset);
 	}
-	read_unlock_irq(&mapping->tree_lock);
-out:
 	return page;
 }
 EXPORT_SYMBOL(find_lock_page);
@@ -751,13 +761,39 @@ unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
 {
 	unsigned int i;
 	unsigned int ret;
+	unsigned int nr_found;
+
+	rcu_read_lock();
+restart:
+	nr_found = radix_tree_gang_lookup_slot(&mapping->page_tree,
+				(void ***)pages, start, nr_pages);
+	ret = 0;
+	for (i = 0; i < nr_found; i++) {
+		struct page *page;
+repeat:
+		page = radix_tree_deref_slot((void **)pages[i]);
+		if (unlikely(!page))
+			continue;
+		/*
+		 * this can only trigger if nr_found == 1, making livelock
+		 * a non issue.
+		 */
+		if (unlikely(page == RADIX_TREE_RETRY))
+			goto restart;
+
+		if (!page_cache_get_speculative(page))
+			goto repeat;
 
-	read_lock_irq(&mapping->tree_lock);
-	ret = radix_tree_gang_lookup(&mapping->page_tree,
-				(void **)pages, start, nr_pages);
-	for (i = 0; i < ret; i++)
-		page_cache_get(pages[i]);
-	read_unlock_irq(&mapping->tree_lock);
+		/* Has the page moved? */
+		if (unlikely(page != *((void **)pages[i]))) {
+			page_cache_release(page);
+			goto repeat;
+		}
+
+		pages[ret] = page;
+		ret++;
+	}
+	rcu_read_unlock();
 	return ret;
 }
 
@@ -778,19 +814,44 @@ unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t index,
 {
 	unsigned int i;
 	unsigned int ret;
+	unsigned int nr_found;
+
+	rcu_read_lock();
+restart:
+	nr_found = radix_tree_gang_lookup_slot(&mapping->page_tree,
+				(void ***)pages, index, nr_pages);
+	ret = 0;
+	for (i = 0; i < nr_found; i++) {
+		struct page *page;
+repeat:
+		page = radix_tree_deref_slot((void **)pages[i]);
+		if (unlikely(!page))
+			continue;
+		/*
+		 * this can only trigger if nr_found == 1, making livelock
+		 * a non issue.
+		 */
+		if (unlikely(page == RADIX_TREE_RETRY))
+			goto restart;
 
-	read_lock_irq(&mapping->tree_lock);
-	ret = radix_tree_gang_lookup(&mapping->page_tree,
-				(void **)pages, index, nr_pages);
-	for (i = 0; i < ret; i++) {
-		if (pages[i]->mapping == NULL || pages[i]->index != index)
+		if (page->mapping == NULL || page->index != index)
 			break;
 
-		page_cache_get(pages[i]);
+		if (!page_cache_get_speculative(page))
+			goto repeat;
+
+		/* Has the page moved? */
+		if (unlikely(page != *((void **)pages[i]))) {
+			page_cache_release(page);
+			goto repeat;
+		}
+
+		pages[ret] = page;
+		ret++;
 		index++;
 	}
-	read_unlock_irq(&mapping->tree_lock);
-	return i;
+	rcu_read_unlock();
+	return ret;
 }
 EXPORT_SYMBOL(find_get_pages_contig);
 
@@ -810,15 +871,43 @@ unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index,
 {
 	unsigned int i;
 	unsigned int ret;
+	unsigned int nr_found;
+
+	rcu_read_lock();
+restart:
+	nr_found = radix_tree_gang_lookup_tag_slot(&mapping->page_tree,
+				(void ***)pages, *index, nr_pages, tag);
+	ret = 0;
+	for (i = 0; i < nr_found; i++) {
+		struct page *page;
+repeat:
+		page = radix_tree_deref_slot((void **)pages[i]);
+		if (unlikely(!page))
+			continue;
+		/*
+		 * this can only trigger if nr_found == 1, making livelock
+		 * a non issue.
+		 */
+		if (unlikely(page == RADIX_TREE_RETRY))
+			goto restart;
+
+		if (!page_cache_get_speculative(page))
+			goto repeat;
+
+		/* Has the page moved? */
+		if (unlikely(page != *((void **)pages[i]))) {
+			page_cache_release(page);
+			goto repeat;
+		}
+
+		pages[ret] = page;
+		ret++;
+	}
+	rcu_read_unlock();
 
-	read_lock_irq(&mapping->tree_lock);
-	ret = radix_tree_gang_lookup_tag(&mapping->page_tree,
-				(void **)pages, *index, nr_pages, tag);
-	for (i = 0; i < ret; i++)
-		page_cache_get(pages[i]);
 	if (ret)
 		*index = pages[ret - 1]->index + 1;
-	read_unlock_irq(&mapping->tree_lock);
+
 	return ret;
 }
 EXPORT_SYMBOL(find_get_pages_tag);
-- 
cgit v1.2.3


From 19fd6231279be3c3bdd02ed99f9b0eb195978064 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Fri, 25 Jul 2008 19:45:32 -0700
Subject: mm: spinlock tree_lock

mapping->tree_lock has no read lockers.  convert the lock from an rwlock
to a spinlock.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/buffer.c                     |  4 ++--
 fs/inode.c                      |  2 +-
 include/asm-arm/cacheflush.h    |  4 ++--
 include/asm-parisc/cacheflush.h |  4 ++--
 include/linux/fs.h              |  2 +-
 mm/filemap.c                    | 10 +++++-----
 mm/migrate.c                    | 11 +++++------
 mm/page-writeback.c             | 12 ++++++------
 mm/swap_state.c                 | 10 +++++-----
 mm/swapfile.c                   |  4 ++--
 mm/truncate.c                   |  6 +++---
 mm/vmscan.c                     |  8 ++++----
 12 files changed, 38 insertions(+), 39 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index d48caee12e2..109b261192d 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -706,7 +706,7 @@ static int __set_page_dirty(struct page *page,
 	if (TestSetPageDirty(page))
 		return 0;
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 	if (page->mapping) {	/* Race with truncate? */
 		WARN_ON_ONCE(warn && !PageUptodate(page));
 
@@ -719,7 +719,7 @@ static int __set_page_dirty(struct page *page,
 		radix_tree_tag_set(&mapping->page_tree,
 				page_index(page), PAGECACHE_TAG_DIRTY);
 	}
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
 	__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
 
 	return 1;
diff --git a/fs/inode.c b/fs/inode.c
index c36d9480335..35b6414522e 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -209,7 +209,7 @@ void inode_init_once(struct inode *inode)
 	INIT_LIST_HEAD(&inode->i_dentry);
 	INIT_LIST_HEAD(&inode->i_devices);
 	INIT_RADIX_TREE(&inode->i_data.page_tree, GFP_ATOMIC);
-	rwlock_init(&inode->i_data.tree_lock);
+	spin_lock_init(&inode->i_data.tree_lock);
 	spin_lock_init(&inode->i_data.i_mmap_lock);
 	INIT_LIST_HEAD(&inode->i_data.private_list);
 	spin_lock_init(&inode->i_data.private_lock);
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index 70b0fe724b6..03cf1ee977b 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -424,9 +424,9 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 }
 
 #define flush_dcache_mmap_lock(mapping) \
-	write_lock_irq(&(mapping)->tree_lock)
+	spin_lock_irq(&(mapping)->tree_lock)
 #define flush_dcache_mmap_unlock(mapping) \
-	write_unlock_irq(&(mapping)->tree_lock)
+	spin_unlock_irq(&(mapping)->tree_lock)
 
 #define flush_icache_user_range(vma,page,addr,len) \
 	flush_dcache_page(page)
diff --git a/include/asm-parisc/cacheflush.h b/include/asm-parisc/cacheflush.h
index 2f1e1b05440..b7ca6dc7fdd 100644
--- a/include/asm-parisc/cacheflush.h
+++ b/include/asm-parisc/cacheflush.h
@@ -45,9 +45,9 @@ void flush_cache_mm(struct mm_struct *mm);
 extern void flush_dcache_page(struct page *page);
 
 #define flush_dcache_mmap_lock(mapping) \
-	write_lock_irq(&(mapping)->tree_lock)
+	spin_lock_irq(&(mapping)->tree_lock)
 #define flush_dcache_mmap_unlock(mapping) \
-	write_unlock_irq(&(mapping)->tree_lock)
+	spin_unlock_irq(&(mapping)->tree_lock)
 
 #define flush_icache_page(vma,page)	do { 		\
 	flush_kernel_dcache_page(page);			\
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 49d8eb7a71b..53d2edb709b 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -499,7 +499,7 @@ struct backing_dev_info;
 struct address_space {
 	struct inode		*host;		/* owner: inode, block_device */
 	struct radix_tree_root	page_tree;	/* radix tree of all pages */
-	rwlock_t		tree_lock;	/* and rwlock protecting it */
+	spinlock_t		tree_lock;	/* and lock protecting it */
 	unsigned int		i_mmap_writable;/* count VM_SHARED mappings */
 	struct prio_tree_root	i_mmap;		/* tree of private and shared mappings */
 	struct list_head	i_mmap_nonlinear;/*list VM_NONLINEAR mappings */
diff --git a/mm/filemap.c b/mm/filemap.c
index feb8448d861..2ed8b0389c5 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -109,7 +109,7 @@
 /*
  * Remove a page from the page cache and free it. Caller has to make
  * sure the page is locked and that nobody else uses it - or that usage
- * is safe.  The caller must hold a write_lock on the mapping's tree_lock.
+ * is safe.  The caller must hold the mapping's tree_lock.
  */
 void __remove_from_page_cache(struct page *page)
 {
@@ -141,9 +141,9 @@ void remove_from_page_cache(struct page *page)
 
 	BUG_ON(!PageLocked(page));
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 	__remove_from_page_cache(page);
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
 }
 
 static int sync_page(void *word)
@@ -469,7 +469,7 @@ int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
 		page->mapping = mapping;
 		page->index = offset;
 
-		write_lock_irq(&mapping->tree_lock);
+		spin_lock_irq(&mapping->tree_lock);
 		error = radix_tree_insert(&mapping->page_tree, offset, page);
 		if (likely(!error)) {
 			mapping->nrpages++;
@@ -480,7 +480,7 @@ int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
 			page_cache_release(page);
 		}
 
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
 		radix_tree_preload_end();
 	} else
 		mem_cgroup_uncharge_cache_page(page);
diff --git a/mm/migrate.c b/mm/migrate.c
index 3ca6392e82c..153572fb60b 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -323,7 +323,7 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 		return 0;
 	}
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 
 	pslot = radix_tree_lookup_slot(&mapping->page_tree,
  					page_index(page));
@@ -331,12 +331,12 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 	expected_count = 2 + !!PagePrivate(page);
 	if (page_count(page) != expected_count ||
 			(struct page *)radix_tree_deref_slot(pslot) != page) {
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
 		return -EAGAIN;
 	}
 
 	if (!page_freeze_refs(page, expected_count)) {
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
 		return -EAGAIN;
 	}
 
@@ -373,10 +373,9 @@ static int migrate_page_move_mapping(struct address_space *mapping,
 	__dec_zone_page_state(page, NR_FILE_PAGES);
 	__inc_zone_page_state(newpage, NR_FILE_PAGES);
 
-	write_unlock_irq(&mapping->tree_lock);
-	if (!PageSwapCache(newpage)) {
+	spin_unlock_irq(&mapping->tree_lock);
+	if (!PageSwapCache(newpage))
 		mem_cgroup_uncharge_cache_page(page);
-	}
 
 	return 0;
 }
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 94c6d8988ab..24de8b65fdb 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1088,7 +1088,7 @@ int __set_page_dirty_nobuffers(struct page *page)
 		if (!mapping)
 			return 1;
 
-		write_lock_irq(&mapping->tree_lock);
+		spin_lock_irq(&mapping->tree_lock);
 		mapping2 = page_mapping(page);
 		if (mapping2) { /* Race with truncate? */
 			BUG_ON(mapping2 != mapping);
@@ -1102,7 +1102,7 @@ int __set_page_dirty_nobuffers(struct page *page)
 			radix_tree_tag_set(&mapping->page_tree,
 				page_index(page), PAGECACHE_TAG_DIRTY);
 		}
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
 		if (mapping->host) {
 			/* !PageAnon && !swapper_space */
 			__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
@@ -1258,7 +1258,7 @@ int test_clear_page_writeback(struct page *page)
 		struct backing_dev_info *bdi = mapping->backing_dev_info;
 		unsigned long flags;
 
-		write_lock_irqsave(&mapping->tree_lock, flags);
+		spin_lock_irqsave(&mapping->tree_lock, flags);
 		ret = TestClearPageWriteback(page);
 		if (ret) {
 			radix_tree_tag_clear(&mapping->page_tree,
@@ -1269,7 +1269,7 @@ int test_clear_page_writeback(struct page *page)
 				__bdi_writeout_inc(bdi);
 			}
 		}
-		write_unlock_irqrestore(&mapping->tree_lock, flags);
+		spin_unlock_irqrestore(&mapping->tree_lock, flags);
 	} else {
 		ret = TestClearPageWriteback(page);
 	}
@@ -1287,7 +1287,7 @@ int test_set_page_writeback(struct page *page)
 		struct backing_dev_info *bdi = mapping->backing_dev_info;
 		unsigned long flags;
 
-		write_lock_irqsave(&mapping->tree_lock, flags);
+		spin_lock_irqsave(&mapping->tree_lock, flags);
 		ret = TestSetPageWriteback(page);
 		if (!ret) {
 			radix_tree_tag_set(&mapping->page_tree,
@@ -1300,7 +1300,7 @@ int test_set_page_writeback(struct page *page)
 			radix_tree_tag_clear(&mapping->page_tree,
 						page_index(page),
 						PAGECACHE_TAG_DIRTY);
-		write_unlock_irqrestore(&mapping->tree_lock, flags);
+		spin_unlock_irqrestore(&mapping->tree_lock, flags);
 	} else {
 		ret = TestSetPageWriteback(page);
 	}
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 3e3381d6c7e..2c217e33d49 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -39,7 +39,7 @@ static struct backing_dev_info swap_backing_dev_info = {
 
 struct address_space swapper_space = {
 	.page_tree	= RADIX_TREE_INIT(GFP_ATOMIC|__GFP_NOWARN),
-	.tree_lock	= __RW_LOCK_UNLOCKED(swapper_space.tree_lock),
+	.tree_lock	= __SPIN_LOCK_UNLOCKED(swapper_space.tree_lock),
 	.a_ops		= &swap_aops,
 	.i_mmap_nonlinear = LIST_HEAD_INIT(swapper_space.i_mmap_nonlinear),
 	.backing_dev_info = &swap_backing_dev_info,
@@ -80,7 +80,7 @@ int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask)
 		SetPageSwapCache(page);
 		set_page_private(page, entry.val);
 
-		write_lock_irq(&swapper_space.tree_lock);
+		spin_lock_irq(&swapper_space.tree_lock);
 		error = radix_tree_insert(&swapper_space.page_tree,
 						entry.val, page);
 		if (likely(!error)) {
@@ -88,7 +88,7 @@ int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask)
 			__inc_zone_page_state(page, NR_FILE_PAGES);
 			INC_CACHE_INFO(add_total);
 		}
-		write_unlock_irq(&swapper_space.tree_lock);
+		spin_unlock_irq(&swapper_space.tree_lock);
 		radix_tree_preload_end();
 
 		if (unlikely(error)) {
@@ -182,9 +182,9 @@ void delete_from_swap_cache(struct page *page)
 
 	entry.val = page_private(page);
 
-	write_lock_irq(&swapper_space.tree_lock);
+	spin_lock_irq(&swapper_space.tree_lock);
 	__delete_from_swap_cache(page);
-	write_unlock_irq(&swapper_space.tree_lock);
+	spin_unlock_irq(&swapper_space.tree_lock);
 
 	swap_free(entry);
 	page_cache_release(page);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 2f33edb8bee..af283933c14 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -369,13 +369,13 @@ int remove_exclusive_swap_page(struct page *page)
 	retval = 0;
 	if (p->swap_map[swp_offset(entry)] == 1) {
 		/* Recheck the page count with the swapcache lock held.. */
-		write_lock_irq(&swapper_space.tree_lock);
+		spin_lock_irq(&swapper_space.tree_lock);
 		if ((page_count(page) == 2) && !PageWriteback(page)) {
 			__delete_from_swap_cache(page);
 			SetPageDirty(page);
 			retval = 1;
 		}
-		write_unlock_irq(&swapper_space.tree_lock);
+		spin_unlock_irq(&swapper_space.tree_lock);
 	}
 	spin_unlock(&swap_lock);
 
diff --git a/mm/truncate.c b/mm/truncate.c
index b8961cb6341..e68443d7456 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -349,18 +349,18 @@ invalidate_complete_page2(struct address_space *mapping, struct page *page)
 	if (PagePrivate(page) && !try_to_release_page(page, GFP_KERNEL))
 		return 0;
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 	if (PageDirty(page))
 		goto failed;
 
 	BUG_ON(PagePrivate(page));
 	__remove_from_page_cache(page);
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
 	ClearPageUptodate(page);
 	page_cache_release(page);	/* pagecache ref */
 	return 1;
 failed:
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
 	return 0;
 }
 
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 0075eac1cd0..8f71761bc4b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -399,7 +399,7 @@ static int __remove_mapping(struct address_space *mapping, struct page *page)
 	BUG_ON(!PageLocked(page));
 	BUG_ON(mapping != page_mapping(page));
 
-	write_lock_irq(&mapping->tree_lock);
+	spin_lock_irq(&mapping->tree_lock);
 	/*
 	 * The non racy check for a busy page.
 	 *
@@ -436,17 +436,17 @@ static int __remove_mapping(struct address_space *mapping, struct page *page)
 	if (PageSwapCache(page)) {
 		swp_entry_t swap = { .val = page_private(page) };
 		__delete_from_swap_cache(page);
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
 		swap_free(swap);
 	} else {
 		__remove_from_page_cache(page);
-		write_unlock_irq(&mapping->tree_lock);
+		spin_unlock_irq(&mapping->tree_lock);
 	}
 
 	return 1;
 
 cannot_free:
-	write_unlock_irq(&mapping->tree_lock);
+	spin_unlock_irq(&mapping->tree_lock);
 	return 0;
 }
 
-- 
cgit v1.2.3


From d91958815d214ea365b98cbff6215383897edcb6 Mon Sep 17 00:00:00 2001
From: Matt LaPlante <kernel1@cyberdogtech.com>
Date: Fri, 25 Jul 2008 19:45:33 -0700
Subject: Documentation cleanup: trivial misspelling, punctuation, and grammar
 corrections.

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/Intel-IOMMU.txt                     |  4 ++--
 Documentation/accounting/taskstats-struct.txt     |  2 +-
 Documentation/cpu-freq/governors.txt              |  2 +-
 Documentation/edac.txt                            |  2 +-
 Documentation/filesystems/proc.txt                |  4 ++--
 Documentation/filesystems/vfs.txt                 |  6 +++---
 Documentation/ia64/kvm.txt                        |  8 ++++----
 Documentation/input/cs461x.txt                    |  2 +-
 Documentation/ioctl/ioctl-decoding.txt            |  4 ++--
 Documentation/iostats.txt                         |  2 +-
 Documentation/keys.txt                            |  2 +-
 Documentation/leds-class.txt                      |  2 +-
 Documentation/local_ops.txt                       |  2 +-
 Documentation/networking/bonding.txt              |  2 +-
 Documentation/networking/can.txt                  |  4 ++--
 Documentation/networking/packet_mmap.txt          |  2 +-
 Documentation/networking/tc-actions-env-rules.txt | 15 ++++++++-------
 Documentation/powerpc/booting-without-of.txt      |  8 ++++----
 Documentation/powerpc/qe_firmware.txt             |  2 +-
 Documentation/s390/driver-model.txt               |  2 +-
 Documentation/scsi/ibmmca.txt                     |  6 +++---
 Documentation/scsi/lpfc.txt                       |  2 +-
 Documentation/scsi/scsi_fc_transport.txt          |  6 +++---
 Documentation/sh/clk.txt                          |  2 +-
 Documentation/sound/alsa/Audiophile-Usb.txt       | 10 +++++-----
 Documentation/sound/alsa/hda_codec.txt            |  2 +-
 Documentation/sound/alsa/soc/dapm.txt             |  2 +-
 Documentation/sysctl/vm.txt                       |  2 +-
 Documentation/timers/highres.txt                  |  2 +-
 Documentation/usb/authorization.txt               |  2 +-
 Documentation/video4linux/sn9c102.txt             |  2 +-
 Documentation/vm/hugetlbpage.txt                  |  2 +-
 Documentation/vm/numa_memory_policy.txt           |  4 ++--
 Documentation/volatile-considered-harmful.txt     |  2 +-
 drivers/message/fusion/lsi/mpi_history.txt        |  6 +++---
 35 files changed, 65 insertions(+), 64 deletions(-)

diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt
index c2321903aa0..21bc416d887 100644
--- a/Documentation/Intel-IOMMU.txt
+++ b/Documentation/Intel-IOMMU.txt
@@ -48,7 +48,7 @@ IOVA generation is pretty generic. We used the same technique as vmalloc()
 but these are not global address spaces, but separate for each domain.
 Different DMA engines may support different number of domains.
 
-We also allocate gaurd pages with each mapping, so we can attempt to catch
+We also allocate guard pages with each mapping, so we can attempt to catch
 any overflow that might happen.
 
 
@@ -112,4 +112,4 @@ TBD
 
 - For compatibility testing, could use unity map domain for all devices, just
   provide a 1-1 for all useful memory under a single domain for all devices.
-- API for paravirt ops for abstracting functionlity for VMM folks.
+- API for paravirt ops for abstracting functionality for VMM folks.
diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt
index b988d110db5..e7512c061c1 100644
--- a/Documentation/accounting/taskstats-struct.txt
+++ b/Documentation/accounting/taskstats-struct.txt
@@ -6,7 +6,7 @@ This document contains an explanation of the struct taskstats fields.
 There are three different groups of fields in the struct taskstats:
 
 1) Common and basic accounting fields
-    If CONFIG_TASKSTATS is set, the taskstats inteface is enabled and
+    If CONFIG_TASKSTATS is set, the taskstats interface is enabled and
     the common fields and basic accounting fields are collected for
     delivery at do_exit() of a task.
 2) Delay accounting fields
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index dcec0564d04..5b0cfa67aff 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -122,7 +122,7 @@ around '10000' or more.
 show_sampling_rate_(min|max): the minimum and maximum sampling rates
 available that you may set 'sampling_rate' to.
 
-up_threshold: defines what the average CPU usaged between the samplings
+up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
 whether it should increase the frequency.  For example when it is set
 to its default value of '80' it means that between the checking
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index ced52738800..8eda3fb6641 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -327,7 +327,7 @@ Sdram memory scrubbing rate:
 	'sdram_scrub_rate'
 
 	Read/Write attribute file that controls memory scrubbing. The scrubbing
-	rate is set by writing a minimum bandwith in bytes/sec to the attribute
+	rate is set by writing a minimum bandwidth in bytes/sec to the attribute
 	file. The rate will be translated to an internal value that gives at
 	least the specified rate.
 
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 8c6384bdfed..64557821ee5 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -931,7 +931,7 @@ group_prealloc  max_to_scan  mb_groups  mb_history  min_to_scan  order2_req
 stats  stream_req
 
 mb_groups:
-This file gives the details of mutiblock allocator buddy cache of free blocks
+This file gives the details of multiblock allocator buddy cache of free blocks
 
 mb_history:
 Multiblock allocation history.
@@ -1474,7 +1474,7 @@ used because pages_free(1355) is smaller than watermark + protection[2]
 normal page requirement. If requirement is DMA zone(index=0), protection[0]
 (=0) is used.
 
-zone[i]'s protection[j] is calculated by following exprssion.
+zone[i]'s protection[j] is calculated by following expression.
 
 (i < j):
   zone[i]->protection[j]
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index b7522c6cbae..c4d348dabe9 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -143,7 +143,7 @@ struct file_system_type {
 
 The get_sb() method has the following arguments:
 
-  struct file_system_type *fs_type: decribes the filesystem, partly initialized
+  struct file_system_type *fs_type: describes the filesystem, partly initialized
   	by the specific filesystem code
 
   int flags: mount flags
@@ -895,9 +895,9 @@ struct dentry_operations {
 	iput() yourself
 
   d_dname: called when the pathname of a dentry should be generated.
-	Usefull for some pseudo filesystems (sockfs, pipefs, ...) to delay
+	Useful for some pseudo filesystems (sockfs, pipefs, ...) to delay
 	pathname generation. (Instead of doing it when dentry is created,
-	its done only when the path is needed.). Real filesystems probably
+	it's done only when the path is needed.). Real filesystems probably
 	dont want to use it, because their dentries are present in global
 	dcache hash, so their hash should be an invariant. As no lock is
 	held, d_dname() should not try to modify the dentry itself, unless
diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt
index bec9d815da3..914d07f4926 100644
--- a/Documentation/ia64/kvm.txt
+++ b/Documentation/ia64/kvm.txt
@@ -50,9 +50,9 @@ Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qe
 		/usr/local/bin/qemu-system-ia64 -smp xx -m 512 -hda $your_image
 		(xx is the number of virtual processors for the guest, now the maximum value is 4)
 
-5. Known possibile issue on some platforms with old Firmware.
+5. Known possible issue on some platforms with old Firmware.
 
-If meet strange host crashe issues, try to solve it through either of the following ways:
+In the event of strange host crash issues, try to solve it through either of the following ways:
 
 (1): Upgrade your Firmware to the latest one.
 
@@ -65,8 +65,8 @@ index 0b53344..f02b0f7 100644
 	mov ar.pfs = loc1
 	mov rp = loc0
 	;;
--	srlz.d				// seralize restoration of psr.l
-+	srlz.i			// seralize restoration of psr.l
+-	srlz.d				// serialize restoration of psr.l
++	srlz.i			// serialize restoration of psr.l
 +	;;
 	br.ret.sptk.many b0
  END(ia64_pal_call_static)
diff --git a/Documentation/input/cs461x.txt b/Documentation/input/cs461x.txt
index afe0d6543e0..202e9dbacec 100644
--- a/Documentation/input/cs461x.txt
+++ b/Documentation/input/cs461x.txt
@@ -31,7 +31,7 @@ The driver works with ALSA drivers simultaneously. For example, the xracer
 uses joystick as input device and PCM device as sound output in one time.
 There are no sound or input collisions detected. The source code have
 comments about them; but I've found the joystick can be initialized 
-separately of ALSA modules. So, you canm use only one joystick driver
+separately of ALSA modules. So, you can use only one joystick driver
 without ALSA drivers. The ALSA drivers are not needed to compile or
 run this driver.
 
diff --git a/Documentation/ioctl/ioctl-decoding.txt b/Documentation/ioctl/ioctl-decoding.txt
index bfdf7f3ee4f..e35efb0cec2 100644
--- a/Documentation/ioctl/ioctl-decoding.txt
+++ b/Documentation/ioctl/ioctl-decoding.txt
@@ -1,6 +1,6 @@
 To decode a hex IOCTL code:
 
-Most architecures use this generic format, but check
+Most architectures use this generic format, but check
 include/ARCH/ioctl.h for specifics, e.g. powerpc
 uses 3 bits to encode read/write and 13 bits for size.
 
@@ -18,7 +18,7 @@ uses 3 bits to encode read/write and 13 bits for size.
  7-0	function #
 
 
- So for example 0x82187201 is a read with arg length of 0x218,
+So for example 0x82187201 is a read with arg length of 0x218,
 character 'r' function 1. Grepping the source reveals this is:
 
 #define VFAT_IOCTL_READDIR_BOTH         _IOR('r', 1, struct dirent [2])
diff --git a/Documentation/iostats.txt b/Documentation/iostats.txt
index 5925c3cd030..59a69ec67c4 100644
--- a/Documentation/iostats.txt
+++ b/Documentation/iostats.txt
@@ -143,7 +143,7 @@ disk and partition statistics are consistent again. Since we still don't
 keep record of the partition-relative address, an operation is attributed to
 the partition which contains the first sector of the request after the
 eventual merges. As requests can be merged across partition, this could lead
-to some (probably insignificant) innacuracy.
+to some (probably insignificant) inaccuracy.
 
 Additional notes
 ----------------
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index d5c7a57d170..b56aacc1fff 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -864,7 +864,7 @@ payload contents" for more information.
     request_key_with_auxdata() respectively.
 
     These two functions return with the key potentially still under
-    construction.  To wait for contruction completion, the following should be
+    construction.  To wait for construction completion, the following should be
     called:
 
 	int wait_for_key_construction(struct key *key, bool intr);
diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt
index 18860ad9935..6399557cdab 100644
--- a/Documentation/leds-class.txt
+++ b/Documentation/leds-class.txt
@@ -59,7 +59,7 @@ Hardware accelerated blink of LEDs
 
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemeted, triggers can
+blink_set() function (see <linux/leds.h>). If implemented, triggers can
 attempt to use it before falling back to software timers. The blink_set()
 function should return 0 if the blink setting is supported, or -EINVAL
 otherwise, which means that LED blinking will be handled by software.
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index 4269a1105b3..f4f8b1c6c8b 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -36,7 +36,7 @@ It can be done by slightly modifying the standard atomic operations : only
 their UP variant must be kept. It typically means removing LOCK prefix (on
 i386 and x86_64) and any SMP sychronization barrier. If the architecture does
 not have a different behavior between SMP and UP, including asm-generic/local.h
-in your archtecture's local.h is sufficient.
+in your architecture's local.h is sufficient.
 
 The local_t type is defined as an opaque signed long by embedding an
 atomic_long_t inside a structure. This is made so a cast from this type to a
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 7fa7fe71d7a..688dfe1e6b7 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -631,7 +631,7 @@ xmit_hash_policy
 		in environments where a layer3 gateway device is
 		required to reach most destinations.
 
-		This algorithm is 802.3ad complient.
+		This algorithm is 802.3ad compliant.
 
 	layer3+4
 
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 641d2afacff..297ba7b1cca 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -186,7 +186,7 @@ solution for a couple of reasons:
 
   The Linux network devices (by default) just can handle the
   transmission and reception of media dependent frames. Due to the
-  arbritration on the CAN bus the transmission of a low prio CAN-ID
+  arbitration on the CAN bus the transmission of a low prio CAN-ID
   may be delayed by the reception of a high prio CAN frame. To
   reflect the correct* traffic on the node the loopback of the sent
   data has to be performed right after a successful transmission. If
@@ -481,7 +481,7 @@ solution for a couple of reasons:
   - stats_timer: To calculate the Socket CAN core statistics
     (e.g. current/maximum frames per second) this 1 second timer is
     invoked at can.ko module start time by default. This timer can be
-    disabled by using stattimer=0 on the module comandline.
+    disabled by using stattimer=0 on the module commandline.
 
   - debug: (removed since SocketCAN SVN r546)
 
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index db0cd516958..07c53d59603 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -326,7 +326,7 @@ just one call to mmap is needed:
     mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
 
 If tp_frame_size is a divisor of tp_block_size frames will be 
-contiguosly spaced by tp_frame_size bytes. If not, each 
+contiguously spaced by tp_frame_size bytes. If not, each
 tp_block_size/tp_frame_size frames there will be a gap between 
 the frames. This is because a frame cannot be spawn across two
 blocks. 
diff --git a/Documentation/networking/tc-actions-env-rules.txt b/Documentation/networking/tc-actions-env-rules.txt
index 01e716d185f..dcadf6f88e3 100644
--- a/Documentation/networking/tc-actions-env-rules.txt
+++ b/Documentation/networking/tc-actions-env-rules.txt
@@ -4,26 +4,27 @@ The "enviromental" rules for authors of any new tc actions are:
 1) If you stealeth or borroweth any packet thou shalt be branching
 from the righteous path and thou shalt cloneth.
 
-For example if your action queues a packet to be processed later
-or intentionaly branches by redirecting a packet then you need to
+For example if your action queues a packet to be processed later,
+or intentionally branches by redirecting a packet, then you need to
 clone the packet.
+
 There are certain fields in the skb tc_verd that need to be reset so we
-avoid loops etc. A few are generic enough so much so that skb_act_clone()
-resets them for you. So invoke skb_act_clone() rather than skb_clone()
+avoid loops, etc.  A few are generic enough that skb_act_clone()
+resets them for you, so invoke skb_act_clone() rather than skb_clone().
 
 2) If you munge any packet thou shalt call pskb_expand_head in the case
 someone else is referencing the skb. After that you "own" the skb.
 You must also tell us if it is ok to munge the packet (TC_OK2MUNGE),
 this way any action downstream can stomp on the packet.
 
-3) dropping packets you dont own is a nono. You simply return
+3) Dropping packets you don't own is a no-no. You simply return
 TC_ACT_SHOT to the caller and they will drop it.
 
 The "enviromental" rules for callers of actions (qdiscs etc) are:
 
-*) thou art responsible for freeing anything returned as being
+*) Thou art responsible for freeing anything returned as being
 TC_ACT_SHOT/STOLEN/QUEUED. If none of TC_ACT_SHOT/STOLEN/QUEUED is
-returned then all is great and you dont need to do anything.
+returned, then all is great and you don't need to do anything.
 
 Post on netdev if something is unclear.
 
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 99514ced82c..928a79ceb7a 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -708,7 +708,7 @@ device or bus to be described by the device tree.
 In general, the format of an address for a device is defined by the
 parent bus type, based on the #address-cells and #size-cells
 properties.  Note that the parent's parent definitions of #address-cells
-and #size-cells are not inhereted so every node with children must specify
+and #size-cells are not inherited so every node with children must specify
 them.  The kernel requires the root node to have those properties defining
 addresses format for devices directly mapped on the processor bus.
 
@@ -1777,7 +1777,7 @@ platforms are moved over to use the flattened-device-tree model.
 
       Xilinx uartlite devices are simple fixed speed serial ports.
 
-      Requred properties:
+      Required properties:
        - current-speed : Baud rate of uartlite
 
       v) Xilinx hwicap
@@ -1799,7 +1799,7 @@ platforms are moved over to use the flattened-device-tree model.
       Xilinx UART 16550 devices are very similar to the NS16550 but with
       different register spacing and an offset from the base address.
 
-      Requred properties:
+      Required properties:
        - clock-frequency : Frequency of the clock input
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
@@ -1953,7 +1953,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
 1) The /system-controller node
 
   This node is used to represent the system-controller and must be
-  present when the system uses a system contller chip. The top-level
+  present when the system uses a system controller chip. The top-level
   system-controller node contains information that is global to all
   devices within the system controller chip. The node name begins
   with "system-controller" followed by the unit address, which is
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt
index 896266432d3..06da4d4b44f 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.txt
@@ -217,7 +217,7 @@ Although it is not recommended, you can specify '0' in the soc.model
 field to skip matching SOCs altogether.
 
 The 'model' field is a 16-bit number that matches the actual SOC. The
-'major' and 'minor' fields are the major and minor revision numbrs,
+'major' and 'minor' fields are the major and minor revision numbers,
 respectively, of the SOC.
 
 For example, to match the 8323, revision 1.0:
diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt
index e938c442277..bde473df748 100644
--- a/Documentation/s390/driver-model.txt
+++ b/Documentation/s390/driver-model.txt
@@ -25,7 +25,7 @@ device 4711 via subchannel 1 in subchannel set 0, and subchannel 2 is a non-I/O
 subchannel. Device 1234 is accessed via subchannel 0 in subchannel set 1.
 
 The subchannel named 'defunct' does not represent any real subchannel on the
-system; it is a pseudo subchannel where disconnnected ccw devices are moved to
+system; it is a pseudo subchannel where disconnected ccw devices are moved to
 if they are displaced by another ccw device becoming operational on their
 former subchannel. The ccw devices will be moved again to a proper subchannel
 if they become operational again on that subchannel.
diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
index a810421f1fb..3920f28710c 100644
--- a/Documentation/scsi/ibmmca.txt
+++ b/Documentation/scsi/ibmmca.txt
@@ -524,7 +524,7 @@
    - Michael Lang
  
    June 25 1997: (v1.8b)
-   1) Some cosmetical changes for the handling of SCSI-device-types.
+   1) Some cosmetic changes for the handling of SCSI-device-types.
       Now, also CD-Burners / WORMs and SCSI-scanners should work. For
       MO-drives I have no experience, therefore not yet supported.
       In logical_devices I changed from different type-variables to one
@@ -914,7 +914,7 @@
       in version 4.0. This was never really necessary, as all troubles were
       based on non-command related reasons up to now, so bypassing commands
       did not help to avoid any bugs. It is kept in 3.2X for debugging reasons.
-   5) Dynamical reassignment of ldns was again verified and analyzed to be
+   5) Dynamic reassignment of ldns was again verified and analyzed to be
       completely inoperational. This is corrected and should work now.
    6) All commands that get sent to the SCSI adapter were verified and
       completed in such a way, that they are now completely conform to the
@@ -1386,7 +1386,7 @@
    concerning the Linux-kernel in special, this SCSI-driver comes without any
    warranty. Its functionality is tested as good as possible on certain 
    machines and combinations of computer hardware, which does not exclude,
-   that dataloss or severe damage of hardware is possible while using this
+   that data loss or severe damage of hardware is possible while using this
    part of software on some arbitrary computer hardware or in combination 
    with other software packages. It is highly recommended to make backup
    copies of your data before using this software. Furthermore, personal
diff --git a/Documentation/scsi/lpfc.txt b/Documentation/scsi/lpfc.txt
index 4dbe41370a6..5741ea8aa88 100644
--- a/Documentation/scsi/lpfc.txt
+++ b/Documentation/scsi/lpfc.txt
@@ -36,7 +36,7 @@ Cable pull and temporary device Loss:
   being removed, a switch rebooting, or a device reboot), the driver could
   hide the disappearance of the device from the midlayer. I/O's issued to
   the LLDD would simply be queued for a short duration, allowing the device
-  to reappear or link come back alive, with no inadvertant side effects
+  to reappear or link come back alive, with no inadvertent side effects
   to the system. If the driver did not hide these conditions, i/o would be
   errored by the driver, the mid-layer would exhaust its retries, and the
   device would be taken offline. Manual intervention would be required to
diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt
index d403e46d846..75143f0c23b 100644
--- a/Documentation/scsi/scsi_fc_transport.txt
+++ b/Documentation/scsi/scsi_fc_transport.txt
@@ -65,7 +65,7 @@ Overview:
     discussion will concentrate on NPIV.
 
   Note: World Wide Name assignment (and uniqueness guarantees) are left
-    up to an administrative entity controling the vport. For example,
+    up to an administrative entity controlling the vport. For example,
     if vports are to be associated with virtual machines, a XEN mgmt
     utility would be responsible for creating wwpn/wwnn's for the vport,
     using it's own naming authority and OUI. (Note: it already does this
@@ -91,7 +91,7 @@ Device Trees and Vport Objects:
   Here's what to expect in the device tree :
    The typical Physical Port's Scsi_Host:
      /sys/devices/.../host17/
-   and it has the typical decendent tree:
+   and it has the typical descendant tree:
      /sys/devices/.../host17/rport-17:0-0/target17:0:0/17:0:0:0:
    and then the vport is created on the Physical Port:
      /sys/devices/.../host17/vport-17:0-0
@@ -192,7 +192,7 @@ Vport States:
       independent of the adapter's link state.
     - Instantiation of the vport on the FC link via ELS traffic, etc.
       This is equivalent to a "link up" and successfull link initialization.
-  Futher information can be found in the interfaces section below for
+  Further information can be found in the interfaces section below for
   Vport Creation.
 
   Once a vport has been instantiated with the kernel/LLDD, a vport state
diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt
index 9aef710e9a4..114b595cfa9 100644
--- a/Documentation/sh/clk.txt
+++ b/Documentation/sh/clk.txt
@@ -12,7 +12,7 @@ means no changes to adjanced clock
 Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
 if it is present in ops structure. The method should set the clock rate and adjust
 all needed clocks according to the passed algo_id.
-Exact values for algo_id are machine-dependend. For the sh7722, the following
+Exact values for algo_id are machine-dependent. For the sh7722, the following
 values are defined:
 
 	NO_CHANGE	= 0,
diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index 2ad5e6306c4..a4c53d8961e 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -236,15 +236,15 @@ The parameter can be given:
        alias snd-card-1 snd-usb-audio
        options snd-usb-audio index=1 device_setup=0x09
 
-CAUTION when initializaing the device
+CAUTION when initializing the device
 -------------------------------------
 
  * Correct initialization on the device requires that device_setup is given to
    the module BEFORE the device is turned on. So, if you use the "manual probing"
    method described above, take care to power-on the device AFTER this initialization.
 
- * Failing to respect this will lead in a misconfiguration of the device. In this case
-   turn off the device, unproble the snd-usb-audio module, then probe it again with 
+ * Failing to respect this will lead to a misconfiguration of the device. In this case
+   turn off the device, unprobe the snd-usb-audio module, then probe it again with
    correct device_setup parameter and then (and only then) turn on the device again.
 
  * If you've correctly initialized the device in a valid mode and then want to switch
@@ -388,9 +388,9 @@ There are 2 main potential issues when using Jackd with the device:
 
 Jack supports big endian devices only in recent versions (thanks to
 Andreas Steinmetz for his first big-endian patch). I can't remember 
-extacly when this support was released into jackd, let's just say that 
+exactly when this support was released into jackd, let's just say that
 with jackd version 0.103.0 it's almost ok (just a small bug is affecting 
-16bits Big-Endian devices, but since you've read  carefully the above 
+16bits Big-Endian devices, but since you've read carefully the above
 paragraphs, you're now using kernel >= 2.6.23 and your 16bits devices 
 are now Little Endians ;-) ).
 
diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt
index 8e1b0252669..34e87ec1379 100644
--- a/Documentation/sound/alsa/hda_codec.txt
+++ b/Documentation/sound/alsa/hda_codec.txt
@@ -67,7 +67,7 @@ CONFIG_SND_HDA_POWER_SAVE kconfig.  It's called when the codec needs
 to power up or may power down.  The controller should check the all
 belonging codecs on the bus whether they are actually powered off
 (check codec->power_on), and optionally the driver may power down the
-contoller side, too.
+controller side, too.
 
 The bus instance is created via snd_hda_bus_new().  You need to pass
 the card instance, the template, and the pointer to store the
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index c784a18b94d..b2ed6983f40 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -68,7 +68,7 @@ Audio DAPM widgets fall into a number of types:-
 (Widgets are defined in include/sound/soc-dapm.h)
 
 Widgets are usually added in the codec driver and the machine driver. There are
-convience macros defined in soc-dapm.h that can be used to quickly build a
+convenience macros defined in soc-dapm.h that can be used to quickly build a
 list of widgets of the codecs and machines DAPM widgets.
 
 Most widgets have a name, register, shift and invert. Some widgets have extra
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 8a4863c4edd..d79eeda7a69 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -116,7 +116,7 @@ of kilobytes free.  The VM uses this number to compute a pages_min
 value for each lowmem zone in the system.  Each lowmem zone gets 
 a number of reserved free pages based proportionally on its size.
 
-Some minimal ammount of memory is needed to satisfy PF_MEMALLOC
+Some minimal amount of memory is needed to satisfy PF_MEMALLOC
 allocations; if you set this to lower than 1024KB, your system will
 become subtly broken, and prone to deadlock under high loads.
 
diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt
index a73ecf5b4bd..21332233cef 100644
--- a/Documentation/timers/highres.txt
+++ b/Documentation/timers/highres.txt
@@ -125,7 +125,7 @@ increase of flexibility and the avoidance of duplicated code across
 architectures justifies the slight increase of the binary size.
 
 The conversion of an architecture has no functional impact, but allows to
-utilize the high resolution and dynamic tick functionalites without any change
+utilize the high resolution and dynamic tick functionalities without any change
 to the clock event device and timer interrupt code. After the conversion the
 enabling of high resolution timers and dynamic ticks is simply provided by
 adding the kernel/time/Kconfig file to the architecture specific Kconfig and
diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt
index 2af40060949..381b22ee783 100644
--- a/Documentation/usb/authorization.txt
+++ b/Documentation/usb/authorization.txt
@@ -8,7 +8,7 @@ not) in a system. This feature will allow you to implement a lock-down
 of USB devices, fully controlled by user space.
 
 As of now, when a USB device is connected it is configured and
-it's interfaces inmediately made available to the users. With this
+its interfaces are immediately made available to the users.  With this
 modification, only if root authorizes the device to be configured will
 then it be possible to use it.
 
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index b26f5195af5..73de4050d63 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -157,7 +157,7 @@ Loading can be done as shown below:
 
 	[root@localhost home]# modprobe sn9c102
 
-Note that the module is called "sn9c102" for historic reasons, althought it
+Note that the module is called "sn9c102" for historic reasons, although it
 does not just support the SN9C102.
 
 At this point all the devices supported by the driver and connected to the USB
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 8a5b5763f0f..ea8714fcc3a 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -77,7 +77,7 @@ memory that is preset in system at this time.  System administrators may want
 to put this command in one of the local rc init files.  This will enable the
 kernel to request huge pages early in the boot process (when the possibility
 of getting physical contiguous pages is still very high). In either
-case, adminstrators will want to verify the number of hugepages actually
+case, administrators will want to verify the number of hugepages actually
 allocated by checking the sysctl or meminfo.
 
 /proc/sys/vm/nr_overcommit_hugepages indicates how large the pool of
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
index bad16d3f6a4..6aaaeb38730 100644
--- a/Documentation/vm/numa_memory_policy.txt
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -58,7 +58,7 @@ most general to most specific:
 	the policy at the time they were allocated.
 
     VMA Policy:  A "VMA" or "Virtual Memory Area" refers to a range of a task's
-    virtual adddress space.  A task may define a specific policy for a range
+    virtual address space.  A task may define a specific policy for a range
     of its virtual address space.   See the MEMORY POLICIES APIS section,
     below, for an overview of the mbind() system call used to set a VMA
     policy.
@@ -353,7 +353,7 @@ follows:
 
    Because of this extra reference counting, and because we must lookup
    shared policies in a tree structure under spinlock, shared policies are
-   more expensive to use in the page allocation path.  This is expecially
+   more expensive to use in the page allocation path.  This is especially
    true for shared policies on shared memory regions shared by tasks running
    on different NUMA nodes.  This extra overhead can be avoided by always
    falling back to task or system default policy for shared memory regions,
diff --git a/Documentation/volatile-considered-harmful.txt b/Documentation/volatile-considered-harmful.txt
index 10c2e411cca..991c26a6ef6 100644
--- a/Documentation/volatile-considered-harmful.txt
+++ b/Documentation/volatile-considered-harmful.txt
@@ -114,6 +114,6 @@ CREDITS
 
 Original impetus and research by Randy Dunlap
 Written by Jonathan Corbet
-Improvements via coments from Satyam Sharma, Johannes Stezenbach, Jesper
+Improvements via comments from Satyam Sharma, Johannes Stezenbach, Jesper
 	Juhl, Heikki Orsila, H. Peter Anvin, Philipp Hahn, and Stefan
 	Richter.
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 241592ab13a..3f15fcfe4a2 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -127,7 +127,7 @@ mpi_ioc.h
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *                      New format for FWVersion and ProductId in
  *                      MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- *  08-31-01  01.02.02  Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ *  08-31-01  01.02.02  Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
  *                      related structure and defines.
  *                      Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
  *                      Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
@@ -187,7 +187,7 @@ mpi_ioc.h
  *  10-11-06  01.05.12  Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
  *                      Added MaxInitiators field to PortFacts reply.
  *                      Added SAS Device Status Change ReasonCode for
- *                      asynchronous notificaiton.
+ *                      asynchronous notification.
  *                      Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
  *                      data structure.
  *                      Added new ImageType values for FWDownload and FWUpload
@@ -213,7 +213,7 @@ mpi_cnfg.h
  *                      Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
  *                      page and updated the page version.
  *                      Added Information field and _INFO_PARAMS_NEGOTIATED
- *                      definitionto SCSI_DEVICE_0 page.
+ *                      definition to SCSI_DEVICE_0 page.
  *  06-22-00  01.00.03  Removed batch controls from LAN_0 page and updated the
  *                      page version.
  *                      Added BucketsRemaining to LAN_1 page, redefined the
-- 
cgit v1.2.3


From 51cc50685a4275c6a02653670af9f108a64e01cf Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Fri, 25 Jul 2008 19:45:34 -0700
Subject: SL*B: drop kmem cache argument from constructor

Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres.  Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.

Non-trivial places are:
	arch/powerpc/mm/init_64.c
	arch/powerpc/mm/hugetlbpage.c

This is flag day, yes.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-s3c24xx/dma.c               |  2 +-
 arch/powerpc/kernel/rtas_flash.c          |  2 +-
 arch/powerpc/mm/hugetlbpage.c             |  9 ++-------
 arch/powerpc/mm/init_64.c                 | 24 +++++++++---------------
 arch/powerpc/platforms/cell/spufs/inode.c |  2 +-
 arch/sh/mm/pmb.c                          |  2 +-
 arch/xtensa/mm/init.c                     |  2 +-
 drivers/usb/mon/mon_text.c                |  4 ++--
 fs/adfs/super.c                           |  2 +-
 fs/affs/super.c                           |  2 +-
 fs/afs/super.c                            |  4 ++--
 fs/befs/linuxvfs.c                        |  2 +-
 fs/bfs/inode.c                            |  2 +-
 fs/block_dev.c                            |  2 +-
 fs/buffer.c                               |  2 +-
 fs/cifs/cifsfs.c                          |  2 +-
 fs/coda/inode.c                           |  2 +-
 fs/ecryptfs/main.c                        |  4 ++--
 fs/efs/super.c                            |  2 +-
 fs/ext2/super.c                           |  2 +-
 fs/ext3/super.c                           |  2 +-
 fs/ext4/super.c                           |  2 +-
 fs/fat/cache.c                            |  2 +-
 fs/fat/inode.c                            |  2 +-
 fs/fuse/inode.c                           |  2 +-
 fs/gfs2/main.c                            |  4 ++--
 fs/hfs/super.c                            |  2 +-
 fs/hfsplus/super.c                        |  2 +-
 fs/hpfs/super.c                           |  2 +-
 fs/hugetlbfs/inode.c                      |  2 +-
 fs/inode.c                                |  2 +-
 fs/isofs/inode.c                          |  2 +-
 fs/jffs2/super.c                          |  2 +-
 fs/jfs/jfs_metapage.c                     |  2 +-
 fs/jfs/super.c                            |  2 +-
 fs/locks.c                                |  2 +-
 fs/minix/inode.c                          |  2 +-
 fs/ncpfs/inode.c                          |  2 +-
 fs/nfs/inode.c                            |  2 +-
 fs/ntfs/super.c                           |  2 +-
 fs/ocfs2/dlm/dlmfs.c                      |  3 +--
 fs/ocfs2/super.c                          |  2 +-
 fs/openpromfs/inode.c                     |  2 +-
 fs/proc/inode.c                           |  2 +-
 fs/qnx4/inode.c                           |  2 +-
 fs/reiserfs/super.c                       |  2 +-
 fs/romfs/inode.c                          |  2 +-
 fs/smbfs/inode.c                          |  2 +-
 fs/sysv/inode.c                           |  2 +-
 fs/ubifs/super.c                          |  2 +-
 fs/udf/super.c                            |  2 +-
 fs/ufs/super.c                            |  2 +-
 fs/xfs/linux-2.6/kmem.h                   |  2 +-
 fs/xfs/linux-2.6/xfs_super.c              |  1 -
 include/linux/slab.h                      |  2 +-
 include/linux/slub_def.h                  |  2 +-
 ipc/mqueue.c                              |  2 +-
 kernel/fork.c                             |  2 +-
 lib/idr.c                                 |  2 +-
 lib/radix-tree.c                          |  2 +-
 mm/rmap.c                                 |  2 +-
 mm/shmem.c                                |  2 +-
 mm/slab.c                                 | 11 +++++------
 mm/slob.c                                 |  7 +++----
 mm/slub.c                                 | 13 ++++++-------
 net/socket.c                              |  2 +-
 net/sunrpc/rpc_pipe.c                     |  2 +-
 67 files changed, 90 insertions(+), 106 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 60f162dc4fa..8c5e656d5d8 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1304,7 +1304,7 @@ struct sysdev_class dma_sysclass = {
 
 /* kmem cache implementation */
 
-static void s3c2410_dma_cache_ctor(struct kmem_cache *c, void *p)
+static void s3c2410_dma_cache_ctor(void *p)
 {
 	memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 09ded5c424a..149cb112cd1 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -286,7 +286,7 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf,
 }
 
 /* constructor for flash_block_cache */
-void rtas_block_ctor(struct kmem_cache *cache, void *ptr)
+void rtas_block_ctor(void *ptr)
 {
 	memset(ptr, 0, RTAS_BLK_SIZE);
 }
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index fb42c4dd321..ed0aab0208a 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -113,7 +113,7 @@ static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 			   unsigned long address, unsigned int psize)
 {
-	pte_t *new = kmem_cache_alloc(huge_pgtable_cache(psize),
+	pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize),
 				      GFP_KERNEL|__GFP_REPEAT);
 
 	if (! new)
@@ -730,11 +730,6 @@ static int __init hugepage_setup_sz(char *str)
 }
 __setup("hugepagesz=", hugepage_setup_sz);
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
-{
-	memset(addr, 0, kmem_cache_size(cache));
-}
-
 static int __init hugetlbpage_init(void)
 {
 	unsigned int psize;
@@ -756,7 +751,7 @@ static int __init hugetlbpage_init(void)
 						HUGEPTE_TABLE_SIZE(psize),
 						HUGEPTE_TABLE_SIZE(psize),
 						0,
-						zero_ctor);
+						NULL);
 			if (!huge_pgtable_cache(psize))
 				panic("hugetlbpage_init(): could not create %s"\
 				      "\n", HUGEPTE_CACHE_NAME(psize));
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index a41bc5aa204..4f7df85129d 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -136,9 +136,14 @@ static int __init setup_kcore(void)
 module_init(setup_kcore);
 #endif
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
+static void pgd_ctor(void *addr)
 {
-	memset(addr, 0, kmem_cache_size(cache));
+	memset(addr, 0, PGD_TABLE_SIZE);
+}
+
+static void pmd_ctor(void *addr)
+{
+	memset(addr, 0, PMD_TABLE_SIZE);
 }
 
 static const unsigned int pgtable_cache_size[2] = {
@@ -163,19 +168,8 @@ struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
 
 void pgtable_cache_init(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
-		int size = pgtable_cache_size[i];
-		const char *name = pgtable_cache_name[i];
-
-		pr_debug("Allocating page table cache %s (#%d) "
-			"for size: %08x...\n", name, i, size);
-		pgtable_cache[i] = kmem_cache_create(name,
-						     size, size,
-						     SLAB_PANIC,
-						     zero_ctor);
-	}
+	pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
+	pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 7123472801d..690ca7b0dcf 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -78,7 +78,7 @@ spufs_destroy_inode(struct inode *inode)
 }
 
 static void
-spufs_init_once(struct kmem_cache *cachep, void *p)
+spufs_init_once(void *p)
 {
 	struct spufs_inode_info *ei = p;
 
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 0b0ec6e0475..46911bcbf17 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -293,7 +293,7 @@ void pmb_unmap(unsigned long addr)
 	} while (pmbe);
 }
 
-static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb)
+static void pmb_cache_ctor(void *pmb)
 {
 	struct pmb_entry *pmbe = pmb;
 
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 81d0560eaea..ee261005b36 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -309,7 +309,7 @@ void show_mem(void)
 
 struct kmem_cache *pgtable_cache __read_mostly;
 
-static void pgd_ctor(struct kmem_cache *cache, void* addr)
+static void pgd_ctor(void* addr)
 {
 	pte_t* ptep = (pte_t*)addr;
 	int i;
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 5e3e4e9b6c7..1f715436d6d 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -87,7 +87,7 @@ struct mon_reader_text {
 
 static struct dentry *mon_dir;		/* Usually /sys/kernel/debug/usbmon */
 
-static void mon_text_ctor(struct kmem_cache *, void *);
+static void mon_text_ctor(void *);
 
 struct mon_text_ptr {
 	int cnt, limit;
@@ -720,7 +720,7 @@ void mon_text_del(struct mon_bus *mbus)
 /*
  * Slab interface: constructor.
  */
-static void mon_text_ctor(struct kmem_cache *slab, void *mem)
+static void mon_text_ctor(void *mem)
 {
 	/*
 	 * Nothing to initialize. No, really!
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index 9e421eeb672..26f3b43726b 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -249,7 +249,7 @@ static void adfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(adfs_inode_cachep, ADFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct adfs_inode_info *ei = (struct adfs_inode_info *) foo;
 
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 4e030956640..3a89094f93d 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -90,7 +90,7 @@ static void affs_destroy_inode(struct inode *inode)
 	kmem_cache_free(affs_inode_cachep, AFFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct affs_inode_info *ei = (struct affs_inode_info *) foo;
 
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 7e3faeef681..250d8c4d66e 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -27,7 +27,7 @@
 
 #define AFS_FS_MAGIC 0x6B414653 /* 'kAFS' */
 
-static void afs_i_init_once(struct kmem_cache *cachep, void *foo);
+static void afs_i_init_once(void *foo);
 static int afs_get_sb(struct file_system_type *fs_type,
 		      int flags, const char *dev_name,
 		      void *data, struct vfsmount *mnt);
@@ -449,7 +449,7 @@ static void afs_put_super(struct super_block *sb)
 /*
  * initialise an inode cache slab element prior to any use
  */
-static void afs_i_init_once(struct kmem_cache *cachep, void *_vnode)
+static void afs_i_init_once(void *_vnode)
 {
 	struct afs_vnode *vnode = _vnode;
 
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index e8717de3bab..02c6e62b72f 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -289,7 +289,7 @@ befs_destroy_inode(struct inode *inode)
         kmem_cache_free(befs_inode_cachep, BEFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
         struct befs_inode_info *bi = (struct befs_inode_info *) foo;
 
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 053e690ec9e..0ed57b5ee01 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -264,7 +264,7 @@ static void bfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(bfs_inode_cachep, BFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct bfs_inode_info *bi = foo;
 
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 10d8a0aa871..dcf37cada36 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -271,7 +271,7 @@ static void bdev_destroy_inode(struct inode *inode)
 	kmem_cache_free(bdev_cachep, bdi);
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct bdev_inode *ei = (struct bdev_inode *) foo;
 	struct block_device *bdev = &ei->bdev;
diff --git a/fs/buffer.c b/fs/buffer.c
index 109b261192d..5fd497cdd6f 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -3272,7 +3272,7 @@ int bh_submit_read(struct buffer_head *bh)
 EXPORT_SYMBOL(bh_submit_read);
 
 static void
-init_buffer_head(struct kmem_cache *cachep, void *data)
+init_buffer_head(void *data)
 {
 	struct buffer_head *bh = data;
 
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 22857c639df..fe5f6809cba 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -766,7 +766,7 @@ const struct file_operations cifs_dir_ops = {
 };
 
 static void
-cifs_init_once(struct kmem_cache *cachep, void *inode)
+cifs_init_once(void *inode)
 {
 	struct cifsInodeInfo *cifsi = inode;
 
diff --git a/fs/coda/inode.c b/fs/coda/inode.c
index 2f58dfc7008..830f51abb97 100644
--- a/fs/coda/inode.c
+++ b/fs/coda/inode.c
@@ -58,7 +58,7 @@ static void coda_destroy_inode(struct inode *inode)
 	kmem_cache_free(coda_inode_cachep, ITOC(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct coda_inode_info *ei = (struct coda_inode_info *) foo;
 
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 6f403cfba14..448dfd597b5 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -578,7 +578,7 @@ static struct file_system_type ecryptfs_fs_type = {
  * Initializes the ecryptfs_inode_info_cache when it is created
  */
 static void
-inode_info_init_once(struct kmem_cache *cachep, void *vptr)
+inode_info_init_once(void *vptr)
 {
 	struct ecryptfs_inode_info *ei = (struct ecryptfs_inode_info *)vptr;
 
@@ -589,7 +589,7 @@ static struct ecryptfs_cache_info {
 	struct kmem_cache **cache;
 	const char *name;
 	size_t size;
-	void (*ctor)(struct kmem_cache *cache, void *obj);
+	void (*ctor)(void *obj);
 } ecryptfs_cache_infos[] = {
 	{
 		.cache = &ecryptfs_auth_tok_list_item_cache,
diff --git a/fs/efs/super.c b/fs/efs/super.c
index d733531b55e..567b134fa1f 100644
--- a/fs/efs/super.c
+++ b/fs/efs/super.c
@@ -70,7 +70,7 @@ static void efs_destroy_inode(struct inode *inode)
 	kmem_cache_free(efs_inode_cachep, INODE_INFO(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct efs_inode_info *ei = (struct efs_inode_info *) foo;
 
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 31308a3b0b8..fd88c7b43e6 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -159,7 +159,7 @@ static void ext2_destroy_inode(struct inode *inode)
 	kmem_cache_free(ext2_inode_cachep, EXT2_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ext2_inode_info *ei = (struct ext2_inode_info *) foo;
 
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 615788c6843..8ddced38467 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -472,7 +472,7 @@ static void ext3_destroy_inode(struct inode *inode)
 	kmem_cache_free(ext3_inode_cachep, EXT3_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ext3_inode_info *ei = (struct ext3_inode_info *) foo;
 
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 1cb371dcd60..b5479b1dff1 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -595,7 +595,7 @@ static void ext4_destroy_inode(struct inode *inode)
 	kmem_cache_free(ext4_inode_cachep, EXT4_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ext4_inode_info *ei = (struct ext4_inode_info *) foo;
 
diff --git a/fs/fat/cache.c b/fs/fat/cache.c
index 3a9ecac8d61..3222f51c41c 100644
--- a/fs/fat/cache.c
+++ b/fs/fat/cache.c
@@ -36,7 +36,7 @@ static inline int fat_max_cache(struct inode *inode)
 
 static struct kmem_cache *fat_cache_cachep;
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct fat_cache *cache = (struct fat_cache *)foo;
 
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 23676f9d79c..6d266d793e2 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -498,7 +498,7 @@ static void fat_destroy_inode(struct inode *inode)
 	kmem_cache_free(fat_inode_cachep, MSDOS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct msdos_inode_info *ei = (struct msdos_inode_info *)foo;
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 7d2f7d6e22e..d2249f174e2 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -956,7 +956,7 @@ static inline void unregister_fuseblk(void)
 }
 #endif
 
-static void fuse_inode_init_once(struct kmem_cache *cachep, void *foo)
+static void fuse_inode_init_once(void *foo)
 {
 	struct inode * inode = foo;
 
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index bcc668d0fad..bb2cc303ac2 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -24,7 +24,7 @@
 #include "util.h"
 #include "glock.h"
 
-static void gfs2_init_inode_once(struct kmem_cache *cachep, void *foo)
+static void gfs2_init_inode_once(void *foo)
 {
 	struct gfs2_inode *ip = foo;
 
@@ -33,7 +33,7 @@ static void gfs2_init_inode_once(struct kmem_cache *cachep, void *foo)
 	ip->i_alloc = NULL;
 }
 
-static void gfs2_init_glock_once(struct kmem_cache *cachep, void *foo)
+static void gfs2_init_glock_once(void *foo)
 {
 	struct gfs2_glock *gl = foo;
 
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index ac2ec5ef66e..4abb1047c68 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -432,7 +432,7 @@ static struct file_system_type hfs_fs_type = {
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 
-static void hfs_init_once(struct kmem_cache *cachep, void *p)
+static void hfs_init_once(void *p)
 {
 	struct hfs_inode_info *i = p;
 
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 3859118531c..e834e578c93 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -485,7 +485,7 @@ static struct file_system_type hfsplus_fs_type = {
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 
-static void hfsplus_init_once(struct kmem_cache *cachep, void *p)
+static void hfsplus_init_once(void *p)
 {
 	struct hfsplus_inode_info *i = p;
 
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index f63a699ec65..b8ae9c90ada 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -173,7 +173,7 @@ static void hpfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(hpfs_inode_cachep, hpfs_i(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct hpfs_inode_info *ei = (struct hpfs_inode_info *) foo;
 
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index dbd01d262ca..3f58923fb39 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -705,7 +705,7 @@ static const struct address_space_operations hugetlbfs_aops = {
 };
 
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct hugetlbfs_inode_info *ei = (struct hugetlbfs_inode_info *)foo;
 
diff --git a/fs/inode.c b/fs/inode.c
index 35b6414522e..b6726f64453 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -224,7 +224,7 @@ void inode_init_once(struct inode *inode)
 
 EXPORT_SYMBOL(inode_init_once);
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct inode * inode = (struct inode *) foo;
 
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 044a254d526..26948a6033b 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -73,7 +73,7 @@ static void isofs_destroy_inode(struct inode *inode)
 	kmem_cache_free(isofs_inode_cachep, ISOFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct iso_inode_info *ei = foo;
 
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 7da69eae49e..efd401257ed 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -44,7 +44,7 @@ static void jffs2_destroy_inode(struct inode *inode)
 	kmem_cache_free(jffs2_inode_cachep, JFFS2_INODE_INFO(inode));
 }
 
-static void jffs2_i_init_once(struct kmem_cache *cachep, void *foo)
+static void jffs2_i_init_once(void *foo)
 {
 	struct jffs2_inode_info *f = foo;
 
diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
index 854ff0ec574..c350057087d 100644
--- a/fs/jfs/jfs_metapage.c
+++ b/fs/jfs/jfs_metapage.c
@@ -182,7 +182,7 @@ static inline void remove_metapage(struct page *page, struct metapage *mp)
 
 #endif
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct metapage *mp = (struct metapage *)foo;
 
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 359c091d896..3630718be39 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -760,7 +760,7 @@ static struct file_system_type jfs_fs_type = {
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct jfs_inode_info *jfs_ip = (struct jfs_inode_info *) foo;
 
diff --git a/fs/locks.c b/fs/locks.c
index 01490300f7c..5eb259e3cd3 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -201,7 +201,7 @@ EXPORT_SYMBOL(locks_init_lock);
  * Initialises the fields of the file lock which are invariant for
  * free file_locks.
  */
-static void init_once(struct kmem_cache *cache, void *foo)
+static void init_once(void *foo)
 {
 	struct file_lock *lock = (struct file_lock *) foo;
 
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 523d7371341..d1d1eb84679 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -68,7 +68,7 @@ static void minix_destroy_inode(struct inode *inode)
 	kmem_cache_free(minix_inode_cachep, minix_i(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct minix_inode_info *ei = (struct minix_inode_info *) foo;
 
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index 2e5ab1204de..d642f0e5b36 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -64,7 +64,7 @@ static void ncp_destroy_inode(struct inode *inode)
 	kmem_cache_free(ncp_inode_cachep, NCP_FINFO(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ncp_inode_info *ei = (struct ncp_inode_info *) foo;
 
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index df23f987da6..52daefa2f52 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1242,7 +1242,7 @@ static inline void nfs4_init_once(struct nfs_inode *nfsi)
 #endif
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct nfs_inode *nfsi = (struct nfs_inode *) foo;
 
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 3e76f3b216b..4a46743b507 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -3080,7 +3080,7 @@ struct kmem_cache *ntfs_inode_cache;
 struct kmem_cache *ntfs_big_inode_cache;
 
 /* Init once constructor for the inode slab cache. */
-static void ntfs_big_inode_init_once(struct kmem_cache *cachep, void *foo)
+static void ntfs_big_inode_init_once(void *foo)
 {
 	ntfs_inode *ni = (ntfs_inode *)foo;
 
diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c
index e48aba698b7..533a789c3ef 100644
--- a/fs/ocfs2/dlm/dlmfs.c
+++ b/fs/ocfs2/dlm/dlmfs.c
@@ -267,8 +267,7 @@ static ssize_t dlmfs_file_write(struct file *filp,
 	return writelen;
 }
 
-static void dlmfs_init_once(struct kmem_cache *cachep,
-			    void *foo)
+static void dlmfs_init_once(void *foo)
 {
 	struct dlmfs_inode_private *ip =
 		(struct dlmfs_inode_private *) foo;
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index ccecfe5094f..2560b33889a 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1118,7 +1118,7 @@ bail:
 	return status;
 }
 
-static void ocfs2_inode_init_once(struct kmem_cache *cachep, void *data)
+static void ocfs2_inode_init_once(void *data)
 {
 	struct ocfs2_inode_info *oi = data;
 
diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c
index d17b4fd204e..9f5b054f06b 100644
--- a/fs/openpromfs/inode.c
+++ b/fs/openpromfs/inode.c
@@ -430,7 +430,7 @@ static struct file_system_type openprom_fs_type = {
 	.kill_sb	= kill_anon_super,
 };
 
-static void op_inode_init_once(struct kmem_cache * cachep, void *data)
+static void op_inode_init_once(void *data)
 {
 	struct op_inode_info *oi = (struct op_inode_info *) data;
 
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 02eca2ed9dd..b37f25dc45a 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -94,7 +94,7 @@ static void proc_destroy_inode(struct inode *inode)
 	kmem_cache_free(proc_inode_cachep, PROC_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct proc_inode *ei = (struct proc_inode *) foo;
 
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index b31ab78052b..2aad1044b84 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -553,7 +553,7 @@ static void qnx4_destroy_inode(struct inode *inode)
 	kmem_cache_free(qnx4_inode_cachep, qnx4_i(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct qnx4_inode_info *ei = (struct qnx4_inode_info *) foo;
 
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 2ec748ba0bd..879e54d35c2 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -521,7 +521,7 @@ static void reiserfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(reiserfs_inode_cachep, REISERFS_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct reiserfs_inode_info *ei = (struct reiserfs_inode_info *)foo;
 
diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c
index 3f13d491c7c..8e51a2aaa97 100644
--- a/fs/romfs/inode.c
+++ b/fs/romfs/inode.c
@@ -577,7 +577,7 @@ static void romfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(romfs_inode_cachep, ROMFS_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct romfs_inode_info *ei = foo;
 
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index 376ef3ee6ed..3528f40ffb0 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -67,7 +67,7 @@ static void smb_destroy_inode(struct inode *inode)
 	kmem_cache_free(smb_inode_cachep, SMB_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct smb_inode_info *ei = (struct smb_inode_info *) foo;
 
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index c5d60de0658..df0d435baa4 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -326,7 +326,7 @@ static void sysv_destroy_inode(struct inode *inode)
 	kmem_cache_free(sysv_inode_cachep, SYSV_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *p)
+static void init_once(void *p)
 {
 	struct sysv_inode_info *si = (struct sysv_inode_info *)p;
 
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 00eb9c68ad0..ca1e2d4e03c 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1841,7 +1841,7 @@ static struct file_system_type ubifs_fs_type = {
 /*
  * Inode slab cache constructor.
  */
-static void inode_slab_ctor(struct kmem_cache *cachep, void *obj)
+static void inode_slab_ctor(void *obj)
 {
 	struct ubifs_inode *ui = obj;
 	inode_init_once(&ui->vfs_inode);
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 44cc702f96c..5698bbf83bb 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -148,7 +148,7 @@ static void udf_destroy_inode(struct inode *inode)
 	kmem_cache_free(udf_inode_cachep, UDF_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct udf_inode_info *ei = (struct udf_inode_info *)foo;
 
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 227c9d70004..3e30e40aa24 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -1302,7 +1302,7 @@ static void ufs_destroy_inode(struct inode *inode)
 	kmem_cache_free(ufs_inode_cachep, UFS_I(inode));
 }
 
-static void init_once(struct kmem_cache * cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct ufs_inode_info *ei = (struct ufs_inode_info *) foo;
 
diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h
index 5e956490297..a20683cf74d 100644
--- a/fs/xfs/linux-2.6/kmem.h
+++ b/fs/xfs/linux-2.6/kmem.h
@@ -79,7 +79,7 @@ kmem_zone_init(int size, char *zone_name)
 
 static inline kmem_zone_t *
 kmem_zone_init_flags(int size, char *zone_name, unsigned long flags,
-		     void (*construct)(kmem_zone_t *, void *))
+		     void (*construct)(void *))
 {
 	return kmem_cache_create(zone_name, size, 0, flags, construct);
 }
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 742b2c7852c..943381284e2 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -843,7 +843,6 @@ xfs_fs_destroy_inode(
 
 STATIC void
 xfs_fs_inode_init_once(
-	kmem_zone_t		*zonep,
 	void			*vnode)
 {
 	inode_init_once(vn_to_inode((bhv_vnode_t *)vnode));
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 41103910f8a..9ff8e849940 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -58,7 +58,7 @@ int slab_is_available(void);
 
 struct kmem_cache *kmem_cache_create(const char *, size_t, size_t,
 			unsigned long,
-			void (*)(struct kmem_cache *, void *));
+			void (*)(void *));
 void kmem_cache_destroy(struct kmem_cache *);
 int kmem_cache_shrink(struct kmem_cache *);
 void kmem_cache_free(struct kmem_cache *, void *);
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index d117ea2825a..5bad61a93f6 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -85,7 +85,7 @@ struct kmem_cache {
 	struct kmem_cache_order_objects min;
 	gfp_t allocflags;	/* gfp flags to use on each alloc */
 	int refcount;		/* Refcount for slab cache destroy */
-	void (*ctor)(struct kmem_cache *, void *);
+	void (*ctor)(void *);
 	int inuse;		/* Offset to metadata */
 	int align;		/* Alignment */
 	const char *name;	/* Name (only for display!) */
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 1fdc2eb2f6d..474984f9e03 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -207,7 +207,7 @@ static int mqueue_get_sb(struct file_system_type *fs_type,
 	return get_sb_single(fs_type, flags, data, mqueue_fill_super, mnt);
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct mqueue_inode_info *p = (struct mqueue_inode_info *) foo;
 
diff --git a/kernel/fork.c b/kernel/fork.c
index b99d73e971a..80e83e459b1 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1442,7 +1442,7 @@ long do_fork(unsigned long clone_flags,
 #define ARCH_MIN_MMSTRUCT_ALIGN 0
 #endif
 
-static void sighand_ctor(struct kmem_cache *cachep, void *data)
+static void sighand_ctor(void *data)
 {
 	struct sighand_struct *sighand = data;
 
diff --git a/lib/idr.c b/lib/idr.c
index 3476f8203e9..e728c7fccc4 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -607,7 +607,7 @@ void *idr_replace(struct idr *idp, void *ptr, int id)
 }
 EXPORT_SYMBOL(idr_replace);
 
-static void idr_cache_ctor(struct kmem_cache *idr_layer_cache, void *idr_layer)
+static void idr_cache_ctor(void *idr_layer)
 {
 	memset(idr_layer, 0, sizeof(struct idr_layer));
 }
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 9c4f1ffa286..be86b32bc87 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -1183,7 +1183,7 @@ int radix_tree_tagged(struct radix_tree_root *root, unsigned int tag)
 EXPORT_SYMBOL(radix_tree_tagged);
 
 static void
-radix_tree_node_ctor(struct kmem_cache *cachep, void *node)
+radix_tree_node_ctor(void *node)
 {
 	memset(node, 0, sizeof(struct radix_tree_node));
 }
diff --git a/mm/rmap.c b/mm/rmap.c
index abbd29f7c43..39ae5a9bf38 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -138,7 +138,7 @@ void anon_vma_unlink(struct vm_area_struct *vma)
 		anon_vma_free(anon_vma);
 }
 
-static void anon_vma_ctor(struct kmem_cache *cachep, void *data)
+static void anon_vma_ctor(void *data)
 {
 	struct anon_vma *anon_vma = data;
 
diff --git a/mm/shmem.c b/mm/shmem.c
index 1089092aeca..952d361774b 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2352,7 +2352,7 @@ static void shmem_destroy_inode(struct inode *inode)
 	kmem_cache_free(shmem_inode_cachep, SHMEM_I(inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct shmem_inode_info *p = (struct shmem_inode_info *) foo;
 
diff --git a/mm/slab.c b/mm/slab.c
index 052e7d64537..918f04f7fef 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -406,7 +406,7 @@ struct kmem_cache {
 	unsigned int dflags;		/* dynamic flags */
 
 	/* constructor func */
-	void (*ctor)(struct kmem_cache *, void *);
+	void (*ctor)(void *obj);
 
 /* 5) cache creation/removal */
 	const char *name;
@@ -2137,8 +2137,7 @@ static int __init_refok setup_cpu_cache(struct kmem_cache *cachep)
  */
 struct kmem_cache *
 kmem_cache_create (const char *name, size_t size, size_t align,
-	unsigned long flags,
-	void (*ctor)(struct kmem_cache *, void *))
+	unsigned long flags, void (*ctor)(void *))
 {
 	size_t left_over, slab_size, ralign;
 	struct kmem_cache *cachep = NULL, *pc;
@@ -2653,7 +2652,7 @@ static void cache_init_objs(struct kmem_cache *cachep,
 		 * They must also be threaded.
 		 */
 		if (cachep->ctor && !(cachep->flags & SLAB_POISON))
-			cachep->ctor(cachep, objp + obj_offset(cachep));
+			cachep->ctor(objp + obj_offset(cachep));
 
 		if (cachep->flags & SLAB_RED_ZONE) {
 			if (*dbg_redzone2(cachep, objp) != RED_INACTIVE)
@@ -2669,7 +2668,7 @@ static void cache_init_objs(struct kmem_cache *cachep,
 					 cachep->buffer_size / PAGE_SIZE, 0);
 #else
 		if (cachep->ctor)
-			cachep->ctor(cachep, objp);
+			cachep->ctor(objp);
 #endif
 		slab_bufctl(slabp)[i] = i + 1;
 	}
@@ -3093,7 +3092,7 @@ static void *cache_alloc_debugcheck_after(struct kmem_cache *cachep,
 #endif
 	objp += obj_offset(cachep);
 	if (cachep->ctor && cachep->flags & SLAB_POISON)
-		cachep->ctor(cachep, objp);
+		cachep->ctor(objp);
 #if ARCH_SLAB_MINALIGN
 	if ((u32)objp & (ARCH_SLAB_MINALIGN-1)) {
 		printk(KERN_ERR "0x%p: not aligned to ARCH_SLAB_MINALIGN=%d\n",
diff --git a/mm/slob.c b/mm/slob.c
index de268eb7ac7..d8fbd4d1bfa 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -525,12 +525,11 @@ struct kmem_cache {
 	unsigned int size, align;
 	unsigned long flags;
 	const char *name;
-	void (*ctor)(struct kmem_cache *, void *);
+	void (*ctor)(void *);
 };
 
 struct kmem_cache *kmem_cache_create(const char *name, size_t size,
-	size_t align, unsigned long flags,
-	void (*ctor)(struct kmem_cache *, void *))
+	size_t align, unsigned long flags, void (*ctor)(void *))
 {
 	struct kmem_cache *c;
 
@@ -575,7 +574,7 @@ void *kmem_cache_alloc_node(struct kmem_cache *c, gfp_t flags, int node)
 		b = slob_new_page(flags, get_order(c->size), node);
 
 	if (c->ctor)
-		c->ctor(c, b);
+		c->ctor(b);
 
 	return b;
 }
diff --git a/mm/slub.c b/mm/slub.c
index 77c21cf53ff..b7e2cd5d82d 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1012,7 +1012,7 @@ __setup("slub_debug", setup_slub_debug);
 
 static unsigned long kmem_cache_flags(unsigned long objsize,
 	unsigned long flags, const char *name,
-	void (*ctor)(struct kmem_cache *, void *))
+	void (*ctor)(void *))
 {
 	/*
 	 * Enable debugging if selected on the kernel commandline.
@@ -1040,7 +1040,7 @@ static inline int check_object(struct kmem_cache *s, struct page *page,
 static inline void add_full(struct kmem_cache_node *n, struct page *page) {}
 static inline unsigned long kmem_cache_flags(unsigned long objsize,
 	unsigned long flags, const char *name,
-	void (*ctor)(struct kmem_cache *, void *))
+	void (*ctor)(void *))
 {
 	return flags;
 }
@@ -1103,7 +1103,7 @@ static void setup_object(struct kmem_cache *s, struct page *page,
 {
 	setup_object_debug(s, page, object);
 	if (unlikely(s->ctor))
-		s->ctor(s, object);
+		s->ctor(object);
 }
 
 static struct page *new_slab(struct kmem_cache *s, gfp_t flags, int node)
@@ -2286,7 +2286,7 @@ static int calculate_sizes(struct kmem_cache *s, int forced_order)
 static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 		const char *name, size_t size,
 		size_t align, unsigned long flags,
-		void (*ctor)(struct kmem_cache *, void *))
+		void (*ctor)(void *))
 {
 	memset(s, 0, kmem_size);
 	s->name = name;
@@ -3042,7 +3042,7 @@ static int slab_unmergeable(struct kmem_cache *s)
 
 static struct kmem_cache *find_mergeable(size_t size,
 		size_t align, unsigned long flags, const char *name,
-		void (*ctor)(struct kmem_cache *, void *))
+		void (*ctor)(void *))
 {
 	struct kmem_cache *s;
 
@@ -3082,8 +3082,7 @@ static struct kmem_cache *find_mergeable(size_t size,
 }
 
 struct kmem_cache *kmem_cache_create(const char *name, size_t size,
-		size_t align, unsigned long flags,
-		void (*ctor)(struct kmem_cache *, void *))
+		size_t align, unsigned long flags, void (*ctor)(void *))
 {
 	struct kmem_cache *s;
 
diff --git a/net/socket.c b/net/socket.c
index 1310a82cbba..8ef8ba81b9e 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -265,7 +265,7 @@ static void sock_destroy_inode(struct inode *inode)
 			container_of(inode, struct socket_alloc, vfs_inode));
 }
 
-static void init_once(struct kmem_cache *cachep, void *foo)
+static void init_once(void *foo)
 {
 	struct socket_alloc *ei = (struct socket_alloc *)foo;
 
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 5a9b0e7828c..23a2b8f6dc4 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -897,7 +897,7 @@ static struct file_system_type rpc_pipe_fs_type = {
 };
 
 static void
-init_once(struct kmem_cache * cachep, void *foo)
+init_once(void *foo)
 {
 	struct rpc_inode *rpci = (struct rpc_inode *) foo;
 
-- 
cgit v1.2.3


From b8c512f6190e313df69060bae4a161c5c044e272 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 19:45:36 -0700
Subject: Use WARN() in kernel/irq/manage.c

Replace a printk+WARN_ON() by a WARN(); this increases the chance of the
string making it into the bugreport (ie: it goes inside the
---[ cut here ]--- section)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/irq/manage.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index f8914b92b66..152abfd3589 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -177,8 +177,7 @@ static void __enable_irq(struct irq_desc *desc, unsigned int irq)
 {
 	switch (desc->depth) {
 	case 0:
-		printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
-		WARN_ON(1);
+		WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
 		break;
 	case 1: {
 		unsigned int status = desc->status & ~IRQ_DISABLED;
-- 
cgit v1.2.3


From 4c8573e25f27b60b495aaa23089032f685ffd5ba Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 19:45:37 -0700
Subject: Use WARN() in mm/vmalloc.c

Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes
part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmalloc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 35f29381629..85b9a0d2c87 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -381,16 +381,14 @@ static void __vunmap(const void *addr, int deallocate_pages)
 		return;
 
 	if ((PAGE_SIZE-1) & (unsigned long)addr) {
-		printk(KERN_ERR "Trying to vfree() bad address (%p)\n", addr);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Trying to vfree() bad address (%p)\n", addr);
 		return;
 	}
 
 	area = remove_vm_area(addr);
 	if (unlikely(!area)) {
-		printk(KERN_ERR "Trying to vfree() nonexistent vm area (%p)\n",
+		WARN(1, KERN_ERR "Trying to vfree() nonexistent vm area (%p)\n",
 				addr);
-		WARN_ON(1);
 		return;
 	}
 
-- 
cgit v1.2.3


From 261c40c1191ad8d7a2e49fa2bb5f6a84e3d44b10 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 19:45:37 -0700
Subject: use WARN() in kernel/irq/chip.c

Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/irq/chip.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 964964baefa..3cd441ebf5d 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -28,8 +28,7 @@ void dynamic_irq_init(unsigned int irq)
 	unsigned long flags;
 
 	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to initialize invalid IRQ%d\n", irq);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Trying to initialize invalid IRQ%d\n", irq);
 		return;
 	}
 
@@ -62,8 +61,7 @@ void dynamic_irq_cleanup(unsigned int irq)
 	unsigned long flags;
 
 	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to cleanup invalid IRQ%d\n", irq);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Trying to cleanup invalid IRQ%d\n", irq);
 		return;
 	}
 
@@ -71,9 +69,8 @@ void dynamic_irq_cleanup(unsigned int irq)
 	spin_lock_irqsave(&desc->lock, flags);
 	if (desc->action) {
 		spin_unlock_irqrestore(&desc->lock, flags);
-		printk(KERN_ERR "Destroying IRQ%d without calling free_irq\n",
+		WARN(1, KERN_ERR "Destroying IRQ%d without calling free_irq\n",
 			irq);
-		WARN_ON(1);
 		return;
 	}
 	desc->msi_desc = NULL;
@@ -96,8 +93,7 @@ int set_irq_chip(unsigned int irq, struct irq_chip *chip)
 	unsigned long flags;
 
 	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to install chip for IRQ%d\n", irq);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Trying to install chip for IRQ%d\n", irq);
 		return -EINVAL;
 	}
 
-- 
cgit v1.2.3


From 12e0036818eed243c8ed6583ebf98261a2554e12 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 19:45:38 -0700
Subject: Use WARN() in block/

Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 block/as-iosched.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/block/as-iosched.c b/block/as-iosched.c
index 9735acb5b4f..cf4eb0eefbb 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -837,8 +837,7 @@ static void as_completed_request(struct request_queue *q, struct request *rq)
 	WARN_ON(!list_empty(&rq->queuelist));
 
 	if (RQ_STATE(rq) != AS_RQ_REMOVED) {
-		printk("rq->state %d\n", RQ_STATE(rq));
-		WARN_ON(1);
+		WARN(1, "rq->state %d\n", RQ_STATE(rq));
 		goto out;
 	}
 
-- 
cgit v1.2.3


From f810a5cf28a818db96333cd23646f0227ec015b4 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 19:45:39 -0700
Subject: Use WARN() in drivers/base/

Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/base/core.c   |  6 ++----
 drivers/base/memory.c |  3 +--
 drivers/base/sys.c    | 12 ++++--------
 3 files changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index 7d5c63c81a5..068aa1c9538 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -116,12 +116,10 @@ static void device_release(struct kobject *kobj)
 		dev->type->release(dev);
 	else if (dev->class && dev->class->dev_release)
 		dev->class->dev_release(dev);
-	else {
-		printk(KERN_ERR "Device '%s' does not have a release() "
+	else
+		WARN(1, KERN_ERR "Device '%s' does not have a release() "
 			"function, it is broken and must be fixed.\n",
 			dev->bus_id);
-		WARN_ON(1);
-	}
 }
 
 static struct kobj_type device_ktype = {
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 855ed1a9f97..3ad49a00029 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -204,9 +204,8 @@ memory_block_action(struct memory_block *mem, unsigned long action)
 			}
 			break;
 		default:
-			printk(KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
+			WARN(1, KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
 					__func__, mem, action, action);
-			WARN_ON(1);
 			ret = -EINVAL;
 	}
 
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 40fc14f0354..75dd6e22faf 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -168,19 +168,16 @@ int sysdev_driver_register(struct sysdev_class *cls, struct sysdev_driver *drv)
 	int err = 0;
 
 	if (!cls) {
-		printk(KERN_WARNING "sysdev: invalid class passed to "
+		WARN(1, KERN_WARNING "sysdev: invalid class passed to "
 			"sysdev_driver_register!\n");
-		WARN_ON(1);
 		return -EINVAL;
 	}
 
 	/* Check whether this driver has already been added to a class. */
-	if (drv->entry.next && !list_empty(&drv->entry)) {
-		printk(KERN_WARNING "sysdev: class %s: driver (%p) has already"
+	if (drv->entry.next && !list_empty(&drv->entry))
+		WARN(1, KERN_WARNING "sysdev: class %s: driver (%p) has already"
 			" been registered to a class, something is wrong, but "
 			"will forge on!\n", cls->name, drv);
-		WARN_ON(1);
-	}
 
 	mutex_lock(&sysdev_drivers_lock);
 	if (cls && kset_get(&cls->kset)) {
@@ -194,8 +191,7 @@ int sysdev_driver_register(struct sysdev_class *cls, struct sysdev_driver *drv)
 		}
 	} else {
 		err = -EINVAL;
-		printk(KERN_ERR "%s: invalid device class\n", __func__);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "%s: invalid device class\n", __func__);
 	}
 	mutex_unlock(&sysdev_drivers_lock);
 	return err;
-- 
cgit v1.2.3


From 5cd2b459d326a424671dcd95f038649f7bf7cb96 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 19:45:39 -0700
Subject: Use WARN() in lib/

Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes
part of the warning section for better reporting/collection.  In addition, one
of the if() clauses collapes into the WARN() entirely now.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/debugobjects.c   | 15 +++++----------
 lib/iomap.c          |  3 +--
 lib/kobject_uevent.c |  6 ++----
 lib/plist.c          | 13 +++++++------
 4 files changed, 15 insertions(+), 22 deletions(-)

diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index f86196390cf..45a6bde762d 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -205,9 +205,8 @@ static void debug_print_object(struct debug_obj *obj, char *msg)
 
 	if (limit < 5 && obj->descr != descr_test) {
 		limit++;
-		printk(KERN_ERR "ODEBUG: %s %s object type: %s\n", msg,
+		WARN(1, KERN_ERR "ODEBUG: %s %s object type: %s\n", msg,
 		       obj_states[obj->state], obj->descr->name);
-		WARN_ON(1);
 	}
 	debug_objects_warnings++;
 }
@@ -733,26 +732,22 @@ check_results(void *addr, enum debug_obj_state state, int fixups, int warnings)
 
 	obj = lookup_object(addr, db);
 	if (!obj && state != ODEBUG_STATE_NONE) {
-		printk(KERN_ERR "ODEBUG: selftest object not found\n");
-		WARN_ON(1);
+		WARN(1, KERN_ERR "ODEBUG: selftest object not found\n");
 		goto out;
 	}
 	if (obj && obj->state != state) {
-		printk(KERN_ERR "ODEBUG: selftest wrong state: %d != %d\n",
+		WARN(1, KERN_ERR "ODEBUG: selftest wrong state: %d != %d\n",
 		       obj->state, state);
-		WARN_ON(1);
 		goto out;
 	}
 	if (fixups != debug_objects_fixups) {
-		printk(KERN_ERR "ODEBUG: selftest fixups failed %d != %d\n",
+		WARN(1, KERN_ERR "ODEBUG: selftest fixups failed %d != %d\n",
 		       fixups, debug_objects_fixups);
-		WARN_ON(1);
 		goto out;
 	}
 	if (warnings != debug_objects_warnings) {
-		printk(KERN_ERR "ODEBUG: selftest warnings failed %d != %d\n",
+		WARN(1, KERN_ERR "ODEBUG: selftest warnings failed %d != %d\n",
 		       warnings, debug_objects_warnings);
-		WARN_ON(1);
 		goto out;
 	}
 	res = 0;
diff --git a/lib/iomap.c b/lib/iomap.c
index 37a3ea4cac9..d3222938515 100644
--- a/lib/iomap.c
+++ b/lib/iomap.c
@@ -40,8 +40,7 @@ static void bad_io_access(unsigned long port, const char *access)
 	static int count = 10;
 	if (count) {
 		count--;
-		printk(KERN_ERR "Bad IO access at port %#lx (%s)\n", port, access);
-		WARN_ON(1);
+		WARN(1, KERN_ERR "Bad IO access at port %#lx (%s)\n", port, access);
 	}
 }
 
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 9f8d599459d..3f914725bda 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -285,8 +285,7 @@ int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
 	int len;
 
 	if (env->envp_idx >= ARRAY_SIZE(env->envp)) {
-		printk(KERN_ERR "add_uevent_var: too many keys\n");
-		WARN_ON(1);
+		WARN(1, KERN_ERR "add_uevent_var: too many keys\n");
 		return -ENOMEM;
 	}
 
@@ -297,8 +296,7 @@ int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
 	va_end(args);
 
 	if (len >= (sizeof(env->buf) - env->buflen)) {
-		printk(KERN_ERR "add_uevent_var: buffer size too small\n");
-		WARN_ON(1);
+		WARN(1, KERN_ERR "add_uevent_var: buffer size too small\n");
 		return -ENOMEM;
 	}
 
diff --git a/lib/plist.c b/lib/plist.c
index 3074a02272f..d6c64a824e1 100644
--- a/lib/plist.c
+++ b/lib/plist.c
@@ -31,12 +31,13 @@
 static void plist_check_prev_next(struct list_head *t, struct list_head *p,
 				  struct list_head *n)
 {
-	if (n->prev != p || p->next != n) {
-		printk("top: %p, n: %p, p: %p\n", t, t->next, t->prev);
-		printk("prev: %p, n: %p, p: %p\n", p, p->next, p->prev);
-		printk("next: %p, n: %p, p: %p\n", n, n->next, n->prev);
-		WARN_ON(1);
-	}
+	WARN(n->prev != p || p->next != n,
+			"top: %p, n: %p, p: %p\n"
+			"prev: %p, n: %p, p: %p\n"
+			"next: %p, n: %p, p: %p\n",
+			 t, t->next, t->prev,
+			p, p->next, p->prev,
+			n, n->next, n->prev);
 }
 
 static void plist_check_list(struct list_head *top)
-- 
cgit v1.2.3


From 5c752ad9f35910ff1912b3f3ae82878178ddc432 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 19:45:40 -0700
Subject: Use WARN() in fs/

Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/buffer.c    | 3 +--
 fs/namespace.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index 5fd497cdd6f..f9580501963 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1214,8 +1214,7 @@ void __brelse(struct buffer_head * buf)
 		put_bh(buf);
 		return;
 	}
-	printk(KERN_ERR "VFS: brelse: Trying to free free buffer\n");
-	WARN_ON(1);
+	WARN(1, KERN_ERR "VFS: brelse: Trying to free free buffer\n");
 }
 
 /*
diff --git a/fs/namespace.c b/fs/namespace.c
index 4f6f7635b59..f30b11e2240 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -309,10 +309,9 @@ static void handle_write_count_underflow(struct vfsmount *mnt)
 	 */
 	if ((atomic_read(&mnt->__mnt_writers) < 0) &&
 	    !(mnt->mnt_flags & MNT_IMBALANCED_WRITE_COUNT)) {
-		printk(KERN_DEBUG "leak detected on mount(%p) writers "
+		WARN(1, KERN_DEBUG "leak detected on mount(%p) writers "
 				"count: %d\n",
 			mnt, atomic_read(&mnt->__mnt_writers));
-		WARN_ON(1);
 		/* use the flag to keep the dmesg spam down */
 		mnt->mnt_flags |= MNT_IMBALANCED_WRITE_COUNT;
 	}
-- 
cgit v1.2.3


From 99fcd77d15357e8ba51005c25cc750b9c28b2688 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 19:45:41 -0700
Subject: Use WARN() in fs/sysfs

Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes
part of the warning section for better reporting/collection.  Also, with this,
one fo the if() sections collapses entirely into the WARN().

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/sysfs/dir.c   | 5 +----
 fs/sysfs/file.c  | 3 +--
 fs/sysfs/group.c | 3 +--
 3 files changed, 3 insertions(+), 8 deletions(-)

diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index c1a7efb310b..aedaeba82ae 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -459,11 +459,8 @@ int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
 	int ret;
 
 	ret = __sysfs_add_one(acxt, sd);
-	if (ret == -EEXIST) {
-		printk(KERN_WARNING "sysfs: duplicate filename '%s' "
+	WARN(ret == -EEXIST, KERN_WARNING "sysfs: duplicate filename '%s' "
 		       "can not be created\n", sd->s_name);
-		WARN_ON(1);
-	}
 	return ret;
 }
 
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 3f07893ff89..c9e4e5091da 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -337,9 +337,8 @@ static int sysfs_open_file(struct inode *inode, struct file *file)
 	if (kobj->ktype && kobj->ktype->sysfs_ops)
 		ops = kobj->ktype->sysfs_ops;
 	else {
-		printk(KERN_ERR "missing sysfs attribute operations for "
+		WARN(1, KERN_ERR "missing sysfs attribute operations for "
 		       "kobject: %s\n", kobject_name(kobj));
-		WARN_ON(1);
 		goto err_out;
 	}
 
diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c
index eeba38417b1..fe611949a7f 100644
--- a/fs/sysfs/group.c
+++ b/fs/sysfs/group.c
@@ -134,9 +134,8 @@ void sysfs_remove_group(struct kobject * kobj,
 	if (grp->name) {
 		sd = sysfs_get_dirent(dir_sd, grp->name);
 		if (!sd) {
-			printk(KERN_WARNING "sysfs group %p not found for "
+			WARN(!sd, KERN_WARNING "sysfs group %p not found for "
 				"kobject '%s'\n", grp, kobject_name(kobj));
-			WARN_ON(!sd);
 			return;
 		}
 	} else
-- 
cgit v1.2.3


From 267e2a9c71b8e088ac307f9549f71468e86e26c1 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 25 Jul 2008 19:45:41 -0700
Subject: Use WARN() in fs/proc/

Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.
This way, the entire if() {} section can collapse into the WARN() as well.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/generic.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index bc0a0dd2d84..cb4096cc3fb 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -806,12 +806,9 @@ continue_removing:
 	if (S_ISDIR(de->mode))
 		parent->nlink--;
 	de->nlink = 0;
-	if (de->subdir) {
-		printk(KERN_WARNING "%s: removing non-empty directory "
+	WARN(de->subdir, KERN_WARNING "%s: removing non-empty directory "
 			"'%s/%s', leaking at least '%s'\n", __func__,
 			de->parent->name, de->name, de->subdir->name);
-		WARN_ON(1);
-	}
 	if (atomic_dec_and_test(&de->count))
 		free_proc_entry(de);
 }
-- 
cgit v1.2.3


From 88ac2921a71f788ed693bcd44731dd6bc1994640 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:43 -0700
Subject: tracehook: add linux/tracehook.h

This patch series introduces the "tracehook" interface layer of inlines in
<linux/tracehook.h>.  There are more details in the log entry for patch
01/23 and in the header file comments inside that patch.  Most of these
changes move code around with little or no change, and they should not
break anything or change any behavior.

This sets a new standard for uniform arch support to enable clean
arch-independent implementations of new debugging and tracing stuff,
denoted by CONFIG_HAVE_ARCH_TRACEHOOK.  Patch 20/23 adds that symbol to
arch/Kconfig, with comments listing everything an arch has to do before
setting "select HAVE_ARCH_TRACEHOOK".  These are elaborted a bit at:

	http://sourceware.org/systemtap/wiki/utrace/arch/HowTo

The new inlines that arch code must define or call have detailed kerneldoc
comments in the generic header files that say what is required.

No arch is obligated to do any work, and no arch's build should be broken
by these changes.  There are several steps that each arch should take so
it can set HAVE_ARCH_TRACEHOOK.  Most of these are simple.  Providing this
support will let new things people add for doing debugging and tracing of
user-level threads "just work" for your arch in the future.  For an arch
that does not provide HAVE_ARCH_TRACEHOOK, some new options for such
features will not be available for config.

I have done some arch work and will submit this to the arch maintainers
after the generic tracehook series settles in.  For now, that work is
available in my GIT repositories, and in patch and mbox-of-patches form at
http://people.redhat.com/roland/utrace/2.6-current/

This paves the way for my "utrace" work, to be submitted later.  But it is
not innately tied to that.  I hope that the tracehook series can go in
soon regardless of what eventually does or doesn't go on top of it.  For
anyone implementing any kind of new tracing/debugging plan, or just
understanding all the context of the existing ptrace implementation,
having tracehook.h makes things much easier to find and understand.

This patch:

This adds the new kernel-internal header file <linux/tracehook.h>.  This
is not yet used at all.  The comments in the header introduce what the
following series of patches is about.

The aim is to formalize and consolidate all the places that the core
kernel code and the arch code now ties into the ptrace implementation.

These patches mostly don't cause any functional change.  They just move
the details of ptrace logic out of core code into tracehook.h inlines,
where they are mostly compiled away to the same as before.  All that
changes is that everything is thoroughly documented and any future
reworking of ptrace, or addition of something new, would not have to touch
core code all over, just change the tracehook.h inlines.

The new linux/ptrace.h inlines are used by the following patches in the
new tracehook_*() inlines.  Using these helpers for the ptrace event stops
makes it simple to change or disable the old ptrace implementation of
these stops conditionally later.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ptrace.h    | 33 ++++++++++++++++++++++++++++++
 include/linux/tracehook.h | 52 +++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 85 insertions(+)
 create mode 100644 include/linux/tracehook.h

diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index c6f5f9dd0ce..c74abfc4c7e 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -121,6 +121,39 @@ static inline void ptrace_unlink(struct task_struct *child)
 int generic_ptrace_peekdata(struct task_struct *tsk, long addr, long data);
 int generic_ptrace_pokedata(struct task_struct *tsk, long addr, long data);
 
+/**
+ * task_ptrace - return %PT_* flags that apply to a task
+ * @task:	pointer to &task_struct in question
+ *
+ * Returns the %PT_* flags that apply to @task.
+ */
+static inline int task_ptrace(struct task_struct *task)
+{
+	return task->ptrace;
+}
+
+/**
+ * ptrace_event - possibly stop for a ptrace event notification
+ * @mask:	%PT_* bit to check in @current->ptrace
+ * @event:	%PTRACE_EVENT_* value to report if @mask is set
+ * @message:	value for %PTRACE_GETEVENTMSG to return
+ *
+ * This checks the @mask bit to see if ptrace wants stops for this event.
+ * If so we stop, reporting @event and @message to the ptrace parent.
+ *
+ * Returns nonzero if we did a ptrace notification, zero if not.
+ *
+ * Called without locks.
+ */
+static inline int ptrace_event(int mask, int event, unsigned long message)
+{
+	if (mask && likely(!(current->ptrace & mask)))
+		return 0;
+	current->ptrace_message = message;
+	ptrace_notify((event << 8) | SIGTRAP);
+	return 1;
+}
+
 #ifndef force_successful_syscall_return
 /*
  * System call handlers that, upon successful completion, need to return a
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
new file mode 100644
index 00000000000..bea0f3eeff5
--- /dev/null
+++ b/include/linux/tracehook.h
@@ -0,0 +1,52 @@
+/*
+ * Tracing hooks
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * This file defines hook entry points called by core code where
+ * user tracing/debugging support might need to do something.  These
+ * entry points are called tracehook_*().  Each hook declared below
+ * has a detailed kerneldoc comment giving the context (locking et
+ * al) from which it is called, and the meaning of its return value.
+ *
+ * Each function here typically has only one call site, so it is ok
+ * to have some nontrivial tracehook_*() inlines.  In all cases, the
+ * fast path when no tracing is enabled should be very short.
+ *
+ * The purpose of this file and the tracehook_* layer is to consolidate
+ * the interface that the kernel core and arch code uses to enable any
+ * user debugging or tracing facility (such as ptrace).  The interfaces
+ * here are carefully documented so that maintainers of core and arch
+ * code do not need to think about the implementation details of the
+ * tracing facilities.  Likewise, maintainers of the tracing code do not
+ * need to understand all the calling core or arch code in detail, just
+ * documented circumstances of each call, such as locking conditions.
+ *
+ * If the calling core code changes so that locking is different, then
+ * it is ok to change the interface documented here.  The maintainer of
+ * core code changing should notify the maintainers of the tracing code
+ * that they need to work out the change.
+ *
+ * Some tracehook_*() inlines take arguments that the current tracing
+ * implementations might not necessarily use.  These function signatures
+ * are chosen to pass in all the information that is on hand in the
+ * caller and might conceivably be relevant to a tracer, so that the
+ * core code won't have to be updated when tracing adds more features.
+ * If a call site changes so that some of those parameters are no longer
+ * already on hand without extra work, then the tracehook_* interface
+ * can change so there is no make-work burden on the core code.  The
+ * maintainer of core code changing should notify the maintainers of the
+ * tracing code that they need to work out the change.
+ */
+
+#ifndef _LINUX_TRACEHOOK_H
+#define _LINUX_TRACEHOOK_H	1
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+
+#endif	/* <linux/tracehook.h> */
-- 
cgit v1.2.3


From 6341c393fcc37d58727865f1ee2f65e632e9d4f0 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:44 -0700
Subject: tracehook: exec

This moves all the ptrace hooks related to exec into tracehook.h inlines.

This also lifts the calls for tracing out of the binfmt load_binary hooks
into search_binary_handler() after it calls into the binfmt module.  This
change has no effect, since all the binfmt modules' load_binary functions
did the call at the end on success, and now search_binary_handler() does
it immediately after return if successful.  We consolidate the repeated
code, and binfmt modules no longer need to import ptrace_notify().

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/ia32/ia32_aout.c |  6 ------
 fs/binfmt_aout.c          |  6 ------
 fs/binfmt_elf.c           |  6 ------
 fs/binfmt_elf_fdpic.c     |  7 -------
 fs/binfmt_flat.c          |  3 ---
 fs/binfmt_som.c           |  2 --
 fs/exec.c                 | 12 ++++--------
 include/linux/tracehook.h | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 50 insertions(+), 38 deletions(-)

diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 58cccb6483b..a0e1dbe67dc 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -441,12 +441,6 @@ beyond_if:
 	regs->r8 = regs->r9 = regs->r10 = regs->r11 =
 	regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
 	set_fs(USER_DS);
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
 	return 0;
 }
 
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index ba4cddb92f1..204cfd1d767 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -444,12 +444,6 @@ beyond_if:
 	regs->gp = ex.a_gpvalue;
 #endif
 	start_thread(regs, ex.a_entry, current->mm->start_stack);
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify ((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
 	return 0;
 }
 
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 3b6ff854d98..655ed8d30a8 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1003,12 +1003,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 #endif
 
 	start_thread(regs, elf_entry, bprm->p);
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify ((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
 	retval = 0;
 out:
 	kfree(loc);
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 1b59b1edf26..fdeadab2f18 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -433,13 +433,6 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm,
 	entryaddr = interp_params.entry_addr ?: exec_params.entry_addr;
 	start_thread(regs, entryaddr, current->mm->start_stack);
 
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
-
 	retval = 0;
 
 error:
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 2cb1acda3a8..56372ecf169 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -920,9 +920,6 @@ static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	
 	start_thread(regs, start_addr, current->mm->start_stack);
 
-	if (current->ptrace & PT_PTRACED)
-		send_sig(SIGTRAP, current, 0);
-
 	return 0;
 }
 
diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c
index fdc36bfd6a7..68be580ba28 100644
--- a/fs/binfmt_som.c
+++ b/fs/binfmt_som.c
@@ -274,8 +274,6 @@ load_som_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	map_hpux_gateway_page(current,current->mm);
 
 	start_thread_som(regs, som_entry, bprm->p);
-	if (current->ptrace & PT_PTRACED)
-		send_sig(SIGTRAP, current, 0);
 	return 0;
 
 	/* error cleanup */
diff --git a/fs/exec.c b/fs/exec.c
index 5e559013e30..b8792a13153 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -42,13 +42,13 @@
 #include <linux/module.h>
 #include <linux/namei.h>
 #include <linux/proc_fs.h>
-#include <linux/ptrace.h>
 #include <linux/mount.h>
 #include <linux/security.h>
 #include <linux/syscalls.h>
 #include <linux/tsacct_kern.h>
 #include <linux/cn_proc.h>
 #include <linux/audit.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
@@ -1071,13 +1071,8 @@ EXPORT_SYMBOL(prepare_binprm);
 
 static int unsafe_exec(struct task_struct *p)
 {
-	int unsafe = 0;
-	if (p->ptrace & PT_PTRACED) {
-		if (p->ptrace & PT_PTRACE_CAP)
-			unsafe |= LSM_UNSAFE_PTRACE_CAP;
-		else
-			unsafe |= LSM_UNSAFE_PTRACE;
-	}
+	int unsafe = tracehook_unsafe_exec(p);
+
 	if (atomic_read(&p->fs->count) > 1 ||
 	    atomic_read(&p->files->count) > 1 ||
 	    atomic_read(&p->sighand->count) > 1)
@@ -1214,6 +1209,7 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
 			read_unlock(&binfmt_lock);
 			retval = fn(bprm, regs);
 			if (retval >= 0) {
+				tracehook_report_exec(fmt, bprm, regs);
 				put_binfmt(fmt);
 				allow_write_access(bprm->file);
 				if (bprm->file)
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index bea0f3eeff5..6276353709c 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -48,5 +48,51 @@
 
 #include <linux/sched.h>
 #include <linux/ptrace.h>
+#include <linux/security.h>
+struct linux_binprm;
+
+/**
+ * tracehook_unsafe_exec - check for exec declared unsafe due to tracing
+ * @task:		current task doing exec
+ *
+ * Return %LSM_UNSAFE_* bits applied to an exec because of tracing.
+ *
+ * Called with task_lock() held on @task.
+ */
+static inline int tracehook_unsafe_exec(struct task_struct *task)
+{
+	int unsafe = 0;
+	int ptrace = task_ptrace(task);
+	if (ptrace & PT_PTRACED) {
+		if (ptrace & PT_PTRACE_CAP)
+			unsafe |= LSM_UNSAFE_PTRACE_CAP;
+		else
+			unsafe |= LSM_UNSAFE_PTRACE;
+	}
+	return unsafe;
+}
+
+/**
+ * tracehook_report_exec - a successful exec was completed
+ * @fmt:		&struct linux_binfmt that performed the exec
+ * @bprm:		&struct linux_binprm containing exec details
+ * @regs:		user-mode register state
+ *
+ * An exec just completed, we are shortly going to return to user mode.
+ * The freshly initialized register state can be seen and changed in @regs.
+ * The name, file and other pointers in @bprm are still on hand to be
+ * inspected, but will be freed as soon as this returns.
+ *
+ * Called with no locks, but with some kernel resources held live
+ * and a reference on @fmt->module.
+ */
+static inline void tracehook_report_exec(struct linux_binfmt *fmt,
+					 struct linux_binprm *bprm,
+					 struct pt_regs *regs)
+{
+	if (!ptrace_event(PT_TRACE_EXEC, PTRACE_EVENT_EXEC, 0) &&
+	    unlikely(task_ptrace(current) & PT_PTRACED))
+		send_sig(SIGTRAP, current, 0);
+}
 
 #endif	/* <linux/tracehook.h> */
-- 
cgit v1.2.3


From ff1188646c6870f336e910fb894eeed74f50471f Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:45 -0700
Subject: tracehook: unexport ptrace_notify

The ptrace_notify() function should not be called by any modules.  It was
only ever exported to be called by binfmt exec functions.  But that is no
longer necessary since fs/exec.c deals with that generically now.  There
should be no calls to ptrace_notify() from outside the core kernel.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/signal.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index 82c3545596c..8715c18b27b 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1895,7 +1895,6 @@ EXPORT_SYMBOL(recalc_sigpending);
 EXPORT_SYMBOL_GPL(dequeue_signal);
 EXPORT_SYMBOL(flush_signals);
 EXPORT_SYMBOL(force_sig);
-EXPORT_SYMBOL(ptrace_notify);
 EXPORT_SYMBOL(send_sig);
 EXPORT_SYMBOL(send_sig_info);
 EXPORT_SYMBOL(sigprocmask);
-- 
cgit v1.2.3


From 30199f5a46aee204bf437a4f5b0740f3efe448b7 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:46 -0700
Subject: tracehook: exit

This moves the PTRACE_EVENT_EXIT tracing into a tracehook.h inline,
tracehook_report_exec().  The change has no effect, just clean-up.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 15 +++++++++++++++
 kernel/exit.c             |  6 ++----
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 6276353709c..967ab473afb 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -95,4 +95,19 @@ static inline void tracehook_report_exec(struct linux_binfmt *fmt,
 		send_sig(SIGTRAP, current, 0);
 }
 
+/**
+ * tracehook_report_exit - task has begun to exit
+ * @exit_code:		pointer to value destined for @current->exit_code
+ *
+ * @exit_code points to the value passed to do_exit(), which tracing
+ * might change here.  This is almost the first thing in do_exit(),
+ * before freeing any resources or setting the %PF_EXITING flag.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_report_exit(long *exit_code)
+{
+	ptrace_event(PT_TRACE_EXIT, PTRACE_EVENT_EXIT, *exit_code);
+}
+
 #endif	/* <linux/tracehook.h> */
diff --git a/kernel/exit.c b/kernel/exit.c
index ad933bb29ec..c3691cbc220 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -46,6 +46,7 @@
 #include <linux/resource.h>
 #include <linux/blkdev.h>
 #include <linux/task_io_accounting_ops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -1029,10 +1030,7 @@ NORET_TYPE void do_exit(long code)
 	if (unlikely(!tsk->pid))
 		panic("Attempted to kill the idle task!");
 
-	if (unlikely(current->ptrace & PT_TRACE_EXIT)) {
-		current->ptrace_message = code;
-		ptrace_notify((PTRACE_EVENT_EXIT << 8) | SIGTRAP);
-	}
+	tracehook_report_exit(&code);
 
 	/*
 	 * We're taking recursive faults here in do_exit. Safest is to just
-- 
cgit v1.2.3


From 09a05394fe2448a4139b014936330af23fa7ec83 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:47 -0700
Subject: tracehook: clone

This moves all the ptrace initialization and tracing logic for task
creation into tracehook.h and ptrace.h inlines.  It reorganizes the code
slightly, but should not change any behavior.

There are four tracehook entry points, at each important stage of task
creation.  This keeps the interface from the core fork.c code fairly
clean, while supporting the complex setup required for ptrace or something
like it.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ptrace.h    |  22 ++++++++++
 include/linux/tracehook.h | 100 ++++++++++++++++++++++++++++++++++++++++++++++
 kernel/fork.c             |  69 +++++++++++++-------------------
 3 files changed, 150 insertions(+), 41 deletions(-)

diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index c74abfc4c7e..dae6d85520f 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -154,6 +154,28 @@ static inline int ptrace_event(int mask, int event, unsigned long message)
 	return 1;
 }
 
+/**
+ * ptrace_init_task - initialize ptrace state for a new child
+ * @child:		new child task
+ * @ptrace:		true if child should be ptrace'd by parent's tracer
+ *
+ * This is called immediately after adding @child to its parent's children
+ * list.  @ptrace is false in the normal case, and true to ptrace @child.
+ *
+ * Called with current's siglock and write_lock_irq(&tasklist_lock) held.
+ */
+static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
+{
+	INIT_LIST_HEAD(&child->ptrace_entry);
+	INIT_LIST_HEAD(&child->ptraced);
+	child->parent = child->real_parent;
+	child->ptrace = 0;
+	if (unlikely(ptrace)) {
+		child->ptrace = current->ptrace;
+		__ptrace_link(child, current->parent);
+	}
+}
+
 #ifndef force_successful_syscall_return
 /*
  * System call handlers that, upon successful completion, need to return a
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 967ab473afb..3ebc58b5976 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -110,4 +110,104 @@ static inline void tracehook_report_exit(long *exit_code)
 	ptrace_event(PT_TRACE_EXIT, PTRACE_EVENT_EXIT, *exit_code);
 }
 
+/**
+ * tracehook_prepare_clone - prepare for new child to be cloned
+ * @clone_flags:	%CLONE_* flags from clone/fork/vfork system call
+ *
+ * This is called before a new user task is to be cloned.
+ * Its return value will be passed to tracehook_finish_clone().
+ *
+ * Called with no locks held.
+ */
+static inline int tracehook_prepare_clone(unsigned clone_flags)
+{
+	if (clone_flags & CLONE_UNTRACED)
+		return 0;
+
+	if (clone_flags & CLONE_VFORK) {
+		if (current->ptrace & PT_TRACE_VFORK)
+			return PTRACE_EVENT_VFORK;
+	} else if ((clone_flags & CSIGNAL) != SIGCHLD) {
+		if (current->ptrace & PT_TRACE_CLONE)
+			return PTRACE_EVENT_CLONE;
+	} else if (current->ptrace & PT_TRACE_FORK)
+		return PTRACE_EVENT_FORK;
+
+	return 0;
+}
+
+/**
+ * tracehook_finish_clone - new child created and being attached
+ * @child:		new child task
+ * @clone_flags:	%CLONE_* flags from clone/fork/vfork system call
+ * @trace:		return value from tracehook_clone_prepare()
+ *
+ * This is called immediately after adding @child to its parent's children list.
+ * The @trace value is that returned by tracehook_prepare_clone().
+ *
+ * Called with current's siglock and write_lock_irq(&tasklist_lock) held.
+ */
+static inline void tracehook_finish_clone(struct task_struct *child,
+					  unsigned long clone_flags, int trace)
+{
+	ptrace_init_task(child, (clone_flags & CLONE_PTRACE) || trace);
+}
+
+/**
+ * tracehook_report_clone - in parent, new child is about to start running
+ * @trace:		return value from tracehook_clone_prepare()
+ * @regs:		parent's user register state
+ * @clone_flags:	flags from parent's system call
+ * @pid:		new child's PID in the parent's namespace
+ * @child:		new child task
+ *
+ * Called after a child is set up, but before it has been started running.
+ * The @trace value is that returned by tracehook_clone_prepare().
+ * This is not a good place to block, because the child has not started yet.
+ * Suspend the child here if desired, and block in tracehook_clone_complete().
+ * This must prevent the child from self-reaping if tracehook_clone_complete()
+ * uses the @child pointer; otherwise it might have died and been released by
+ * the time tracehook_report_clone_complete() is called.
+ *
+ * Called with no locks held, but the child cannot run until this returns.
+ */
+static inline void tracehook_report_clone(int trace, struct pt_regs *regs,
+					  unsigned long clone_flags,
+					  pid_t pid, struct task_struct *child)
+{
+	if (unlikely(trace)) {
+		/*
+		 * The child starts up with an immediate SIGSTOP.
+		 */
+		sigaddset(&child->pending.signal, SIGSTOP);
+		set_tsk_thread_flag(child, TIF_SIGPENDING);
+	}
+}
+
+/**
+ * tracehook_report_clone_complete - new child is running
+ * @trace:		return value from tracehook_clone_prepare()
+ * @regs:		parent's user register state
+ * @clone_flags:	flags from parent's system call
+ * @pid:		new child's PID in the parent's namespace
+ * @child:		child task, already running
+ *
+ * This is called just after the child has started running.  This is
+ * just before the clone/fork syscall returns, or blocks for vfork
+ * child completion if @clone_flags has the %CLONE_VFORK bit set.
+ * The @child pointer may be invalid if a self-reaping child died and
+ * tracehook_report_clone() took no action to prevent it from self-reaping.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_report_clone_complete(int trace,
+						   struct pt_regs *regs,
+						   unsigned long clone_flags,
+						   pid_t pid,
+						   struct task_struct *child)
+{
+	if (unlikely(trace))
+		ptrace_event(0, trace, pid);
+}
+
 #endif	/* <linux/tracehook.h> */
diff --git a/kernel/fork.c b/kernel/fork.c
index 80e83e459b1..b42f8ed2361 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -37,6 +37,7 @@
 #include <linux/swap.h>
 #include <linux/syscalls.h>
 #include <linux/jiffies.h>
+#include <linux/tracehook.h>
 #include <linux/futex.h>
 #include <linux/task_io_accounting_ops.h>
 #include <linux/rcupdate.h>
@@ -865,8 +866,7 @@ static void copy_flags(unsigned long clone_flags, struct task_struct *p)
 
 	new_flags &= ~PF_SUPERPRIV;
 	new_flags |= PF_FORKNOEXEC;
-	if (!(clone_flags & CLONE_PTRACE))
-		p->ptrace = 0;
+	new_flags |= PF_STARTING;
 	p->flags = new_flags;
 	clear_freeze_flag(p);
 }
@@ -907,7 +907,8 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 					struct pt_regs *regs,
 					unsigned long stack_size,
 					int __user *child_tidptr,
-					struct pid *pid)
+					struct pid *pid,
+					int trace)
 {
 	int retval;
 	struct task_struct *p;
@@ -1163,8 +1164,6 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	 */
 	p->group_leader = p;
 	INIT_LIST_HEAD(&p->thread_group);
-	INIT_LIST_HEAD(&p->ptrace_entry);
-	INIT_LIST_HEAD(&p->ptraced);
 
 	/* Now that the task is set up, run cgroup callbacks if
 	 * necessary. We need to run them before the task is visible
@@ -1195,7 +1194,6 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 		p->real_parent = current->real_parent;
 	else
 		p->real_parent = current;
-	p->parent = p->real_parent;
 
 	spin_lock(&current->sighand->siglock);
 
@@ -1237,8 +1235,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 
 	if (likely(p->pid)) {
 		list_add_tail(&p->sibling, &p->real_parent->children);
-		if (unlikely(p->ptrace & PT_PTRACED))
-			__ptrace_link(p, current->parent);
+		tracehook_finish_clone(p, clone_flags, trace);
 
 		if (thread_group_leader(p)) {
 			if (clone_flags & CLONE_NEWPID)
@@ -1323,29 +1320,13 @@ struct task_struct * __cpuinit fork_idle(int cpu)
 	struct pt_regs regs;
 
 	task = copy_process(CLONE_VM, 0, idle_regs(&regs), 0, NULL,
-				&init_struct_pid);
+			    &init_struct_pid, 0);
 	if (!IS_ERR(task))
 		init_idle(task, cpu);
 
 	return task;
 }
 
-static int fork_traceflag(unsigned clone_flags)
-{
-	if (clone_flags & CLONE_UNTRACED)
-		return 0;
-	else if (clone_flags & CLONE_VFORK) {
-		if (current->ptrace & PT_TRACE_VFORK)
-			return PTRACE_EVENT_VFORK;
-	} else if ((clone_flags & CSIGNAL) != SIGCHLD) {
-		if (current->ptrace & PT_TRACE_CLONE)
-			return PTRACE_EVENT_CLONE;
-	} else if (current->ptrace & PT_TRACE_FORK)
-		return PTRACE_EVENT_FORK;
-
-	return 0;
-}
-
 /*
  *  Ok, this is the main fork-routine.
  *
@@ -1380,14 +1361,14 @@ long do_fork(unsigned long clone_flags,
 		}
 	}
 
-	if (unlikely(current->ptrace)) {
-		trace = fork_traceflag (clone_flags);
-		if (trace)
-			clone_flags |= CLONE_PTRACE;
-	}
+	/*
+	 * When called from kernel_thread, don't do user tracing stuff.
+	 */
+	if (likely(user_mode(regs)))
+		trace = tracehook_prepare_clone(clone_flags);
 
 	p = copy_process(clone_flags, stack_start, regs, stack_size,
-			child_tidptr, NULL);
+			 child_tidptr, NULL, trace);
 	/*
 	 * Do this prior waking up the new thread - the thread pointer
 	 * might get invalid after that point, if the thread exits quickly.
@@ -1405,24 +1386,30 @@ long do_fork(unsigned long clone_flags,
 			init_completion(&vfork);
 		}
 
-		if ((p->ptrace & PT_PTRACED) || (clone_flags & CLONE_STOPPED)) {
+		tracehook_report_clone(trace, regs, clone_flags, nr, p);
+
+		/*
+		 * We set PF_STARTING at creation in case tracing wants to
+		 * use this to distinguish a fully live task from one that
+		 * hasn't gotten to tracehook_report_clone() yet.  Now we
+		 * clear it and set the child going.
+		 */
+		p->flags &= ~PF_STARTING;
+
+		if (unlikely(clone_flags & CLONE_STOPPED)) {
 			/*
 			 * We'll start up with an immediate SIGSTOP.
 			 */
 			sigaddset(&p->pending.signal, SIGSTOP);
 			set_tsk_thread_flag(p, TIF_SIGPENDING);
-		}
-
-		if (!(clone_flags & CLONE_STOPPED))
-			wake_up_new_task(p, clone_flags);
-		else
 			__set_task_state(p, TASK_STOPPED);
-
-		if (unlikely (trace)) {
-			current->ptrace_message = nr;
-			ptrace_notify ((trace << 8) | SIGTRAP);
+		} else {
+			wake_up_new_task(p, clone_flags);
 		}
 
+		tracehook_report_clone_complete(trace, regs,
+						clone_flags, nr, p);
+
 		if (clone_flags & CLONE_VFORK) {
 			freezer_do_not_count();
 			wait_for_completion(&vfork);
-- 
cgit v1.2.3


From daded34be96b1975ff8539ff62ad8b158ce7d842 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:47 -0700
Subject: tracehook: vfork-done

This moves the PTRACE_EVENT_VFORK_DONE tracing into a tracehook.h inline,
tracehook_report_vfork_done().  The change has no effect, just clean-up.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 18 ++++++++++++++++++
 kernel/fork.c             |  5 +----
 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 3ebc58b5976..830e6e16097 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -210,4 +210,22 @@ static inline void tracehook_report_clone_complete(int trace,
 		ptrace_event(0, trace, pid);
 }
 
+/**
+ * tracehook_report_vfork_done - vfork parent's child has exited or exec'd
+ * @child:		child task, already running
+ * @pid:		new child's PID in the parent's namespace
+ *
+ * Called after a %CLONE_VFORK parent has waited for the child to complete.
+ * The clone/vfork system call will return immediately after this.
+ * The @child pointer may be invalid if a self-reaping child died and
+ * tracehook_report_clone() took no action to prevent it from self-reaping.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_report_vfork_done(struct task_struct *child,
+					       pid_t pid)
+{
+	ptrace_event(PT_TRACE_VFORK_DONE, PTRACE_EVENT_VFORK_DONE, pid);
+}
+
 #endif	/* <linux/tracehook.h> */
diff --git a/kernel/fork.c b/kernel/fork.c
index b42f8ed2361..abb3ed6298f 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1414,10 +1414,7 @@ long do_fork(unsigned long clone_flags,
 			freezer_do_not_count();
 			wait_for_completion(&vfork);
 			freezer_count();
-			if (unlikely (current->ptrace & PT_TRACE_VFORK_DONE)) {
-				current->ptrace_message = nr;
-				ptrace_notify ((PTRACE_EVENT_VFORK_DONE << 8) | SIGTRAP);
-			}
+			tracehook_report_vfork_done(p, nr);
 		}
 	} else {
 		nr = PTR_ERR(p);
-- 
cgit v1.2.3


From dae33574dcf5211e1f43c7e45fa29f73ba3e00cb Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:48 -0700
Subject: tracehook: release_task

This moves the ptrace-related logic from release_task into tracehook.h and
ptrace.h inlines.  It provides clean hooks both before and after locking
tasklist_lock, for future tracing logic to do more cleanup without the
lock.

This also changes release_task() itself in the rare "zap_leader" case to
set the leader to EXIT_DEAD before iterating.  This maintains the
invariant that release_task() only ever handles a task in EXIT_DEAD.  This
is a common-sense invariant that is already always true except in this one
arcane case of zombie leader whose parent ignores SIGCHLD.

This change is harmless and only costs one store in this one rare case.
It keeps the expected state more consisently sane, which is nicer when
debugging weirdness in release_task().  It also lets some future code in
the tracehook entry points rely on this invariant for bookkeeping.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ptrace.h    | 13 +++++++++++++
 include/linux/tracehook.h | 28 ++++++++++++++++++++++++++++
 kernel/exit.c             | 21 +++++++++------------
 3 files changed, 50 insertions(+), 12 deletions(-)

diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index dae6d85520f..ed69c03692d 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -176,6 +176,19 @@ static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
 	}
 }
 
+/**
+ * ptrace_release_task - final ptrace-related cleanup of a zombie being reaped
+ * @task:	task in %EXIT_DEAD state
+ *
+ * Called with write_lock(&tasklist_lock) held.
+ */
+static inline void ptrace_release_task(struct task_struct *task)
+{
+	BUG_ON(!list_empty(&task->ptraced));
+	ptrace_unlink(task);
+	BUG_ON(!list_empty(&task->ptrace_entry));
+}
+
 #ifndef force_successful_syscall_return
 /*
  * System call handlers that, upon successful completion, need to return a
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 830e6e16097..9a5b3be2503 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -228,4 +228,32 @@ static inline void tracehook_report_vfork_done(struct task_struct *child,
 	ptrace_event(PT_TRACE_VFORK_DONE, PTRACE_EVENT_VFORK_DONE, pid);
 }
 
+/**
+ * tracehook_prepare_release_task - task is being reaped, clean up tracing
+ * @task:		task in %EXIT_DEAD state
+ *
+ * This is called in release_task() just before @task gets finally reaped
+ * and freed.  This would be the ideal place to remove and clean up any
+ * tracing-related state for @task.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_prepare_release_task(struct task_struct *task)
+{
+}
+
+/**
+ * tracehook_finish_release_task - task is being reaped, clean up tracing
+ * @task:		task in %EXIT_DEAD state
+ *
+ * This is called in release_task() when @task is being in the middle of
+ * being reaped.  After this, there must be no tracing entanglements.
+ *
+ * Called with write_lock_irq(&tasklist_lock) held.
+ */
+static inline void tracehook_finish_release_task(struct task_struct *task)
+{
+	ptrace_release_task(task);
+}
+
 #endif	/* <linux/tracehook.h> */
diff --git a/kernel/exit.c b/kernel/exit.c
index c3691cbc220..da28745f7c3 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -163,27 +163,17 @@ static void delayed_put_task_struct(struct rcu_head *rhp)
 	put_task_struct(container_of(rhp, struct task_struct, rcu));
 }
 
-/*
- * Do final ptrace-related cleanup of a zombie being reaped.
- *
- * Called with write_lock(&tasklist_lock) held.
- */
-static void ptrace_release_task(struct task_struct *p)
-{
-	BUG_ON(!list_empty(&p->ptraced));
-	ptrace_unlink(p);
-	BUG_ON(!list_empty(&p->ptrace_entry));
-}
 
 void release_task(struct task_struct * p)
 {
 	struct task_struct *leader;
 	int zap_leader;
 repeat:
+	tracehook_prepare_release_task(p);
 	atomic_dec(&p->user->processes);
 	proc_flush_task(p);
 	write_lock_irq(&tasklist_lock);
-	ptrace_release_task(p);
+	tracehook_finish_release_task(p);
 	__exit_signal(p);
 
 	/*
@@ -205,6 +195,13 @@ repeat:
 		 * that case.
 		 */
 		zap_leader = task_detached(leader);
+
+		/*
+		 * This maintains the invariant that release_task()
+		 * only runs on a task in EXIT_DEAD, just for sanity.
+		 */
+		if (zap_leader)
+			leader->exit_state = EXIT_DEAD;
 	}
 
 	write_unlock_irq(&tasklist_lock);
-- 
cgit v1.2.3


From 0d094efeb1e98010c6b99923f1eb7e17bf1e3a74 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:49 -0700
Subject: tracehook: tracehook_tracer_task

This adds the tracehook_tracer_task() hook to consolidate all forms of
"Who is using ptrace on me?" logic.  This is used for "TracerPid:" in
/proc and for permission checks.  We also clean up the selinux code the
called an identical accessor.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/array.c           |  9 +++++++--
 fs/proc/base.c            | 13 +++++++++----
 include/linux/tracehook.h | 18 ++++++++++++++++++
 security/selinux/hooks.c  | 22 +++-------------------
 4 files changed, 37 insertions(+), 25 deletions(-)

diff --git a/fs/proc/array.c b/fs/proc/array.c
index 797d775e035..0d6eb33597c 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -80,6 +80,7 @@
 #include <linux/delayacct.h>
 #include <linux/seq_file.h>
 #include <linux/pid_namespace.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -168,8 +169,12 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
 	rcu_read_lock();
 	ppid = pid_alive(p) ?
 		task_tgid_nr_ns(rcu_dereference(p->real_parent), ns) : 0;
-	tpid = pid_alive(p) && p->ptrace ?
-		task_pid_nr_ns(rcu_dereference(p->parent), ns) : 0;
+	tpid = 0;
+	if (pid_alive(p)) {
+		struct task_struct *tracer = tracehook_tracer_task(p);
+		if (tracer)
+			tpid = task_pid_nr_ns(tracer, ns);
+	}
 	seq_printf(m,
 		"State:\t%s\n"
 		"Tgid:\t%d\n"
diff --git a/fs/proc/base.c b/fs/proc/base.c
index a891fe4cb43..4b74dba69a6 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -69,6 +69,7 @@
 #include <linux/mount.h>
 #include <linux/security.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/cgroup.h>
 #include <linux/cpuset.h>
 #include <linux/audit.h>
@@ -231,10 +232,14 @@ static int check_mem_permission(struct task_struct *task)
 	 * If current is actively ptrace'ing, and would also be
 	 * permitted to freshly attach with ptrace now, permit it.
 	 */
-	if (task->parent == current && (task->ptrace & PT_PTRACED) &&
-	    task_is_stopped_or_traced(task) &&
-	    ptrace_may_access(task, PTRACE_MODE_ATTACH))
-		return 0;
+	if (task_is_stopped_or_traced(task)) {
+		int match;
+		rcu_read_lock();
+		match = (tracehook_tracer_task(task) == current);
+		rcu_read_unlock();
+		if (match && ptrace_may_access(task, PTRACE_MODE_ATTACH))
+			return 0;
+	}
 
 	/*
 	 * Noone else is allowed.
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 9a5b3be2503..6468ca0fe69 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -72,6 +72,24 @@ static inline int tracehook_unsafe_exec(struct task_struct *task)
 	return unsafe;
 }
 
+/**
+ * tracehook_tracer_task - return the task that is tracing the given task
+ * @tsk:		task to consider
+ *
+ * Returns NULL if noone is tracing @task, or the &struct task_struct
+ * pointer to its tracer.
+ *
+ * Must called under rcu_read_lock().  The pointer returned might be kept
+ * live only by RCU.  During exec, this may be called with task_lock()
+ * held on @task, still held from when tracehook_unsafe_exec() was called.
+ */
+static inline struct task_struct *tracehook_tracer_task(struct task_struct *tsk)
+{
+	if (task_ptrace(tsk) & PT_PTRACED)
+		return rcu_dereference(tsk->parent);
+	return NULL;
+}
+
 /**
  * tracehook_report_exec - a successful exec was completed
  * @fmt:		&struct linux_binfmt that performed the exec
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 63f131fc42e..3481cde5bf1 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -25,7 +25,7 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/security.h>
@@ -1971,22 +1971,6 @@ static int selinux_vm_enough_memory(struct mm_struct *mm, long pages)
 	return __vm_enough_memory(mm, pages, cap_sys_admin);
 }
 
-/**
- * task_tracer_task - return the task that is tracing the given task
- * @task:		task to consider
- *
- * Returns NULL if noone is tracing @task, or the &struct task_struct
- * pointer to its tracer.
- *
- * Must be called under rcu_read_lock().
- */
-static struct task_struct *task_tracer_task(struct task_struct *task)
-{
-	if (task->ptrace & PT_PTRACED)
-		return rcu_dereference(task->parent);
-	return NULL;
-}
-
 /* binprm security operations */
 
 static int selinux_bprm_alloc_security(struct linux_binprm *bprm)
@@ -2238,7 +2222,7 @@ static void selinux_bprm_apply_creds(struct linux_binprm *bprm, int unsafe)
 			u32 ptsid = 0;
 
 			rcu_read_lock();
-			tracer = task_tracer_task(current);
+			tracer = tracehook_tracer_task(current);
 			if (likely(tracer != NULL)) {
 				sec = tracer->security;
 				ptsid = sec->sid;
@@ -5247,7 +5231,7 @@ static int selinux_setprocattr(struct task_struct *p,
 		   Otherwise, leave SID unchanged and fail. */
 		task_lock(p);
 		rcu_read_lock();
-		tracer = task_tracer_task(p);
+		tracer = tracehook_tracer_task(p);
 		if (tracer != NULL) {
 			struct task_security_struct *ptsec = tracer->security;
 			u32 ptsid = ptsec->sid;
-- 
cgit v1.2.3


From fa8e26ccd485216fc45c8c2dd1ec3b7ef1a0a2f8 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:50 -0700
Subject: tracehook: tracehook_expect_breakpoints

This adds tracehook_expect_breakpoints() as a formal hook for the nommu
code to use for its, "Is text-poking likely?" check at mmap time.  This
names the actual semantics the code means to test, and documents it.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 15 +++++++++++++++
 mm/nommu.c                |  4 ++--
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 6468ca0fe69..e113e09b034 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -51,6 +51,21 @@
 #include <linux/security.h>
 struct linux_binprm;
 
+/**
+ * tracehook_expect_breakpoints - guess if task memory might be touched
+ * @task:		current task, making a new mapping
+ *
+ * Return nonzero if @task is expected to want breakpoint insertion in
+ * its memory at some point.  A zero return is no guarantee it won't
+ * be done, but this is a hint that it's known to be likely.
+ *
+ * May be called with @task->mm->mmap_sem held for writing.
+ */
+static inline int tracehook_expect_breakpoints(struct task_struct *task)
+{
+	return (task_ptrace(task) & PT_PTRACED) != 0;
+}
+
 /**
  * tracehook_unsafe_exec - check for exec declared unsafe due to tracing
  * @task:		current task doing exec
diff --git a/mm/nommu.c b/mm/nommu.c
index 4462b6a3fcb..5edccd9c921 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -22,7 +22,7 @@
 #include <linux/pagemap.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/blkdev.h>
 #include <linux/backing-dev.h>
 #include <linux/mount.h>
@@ -745,7 +745,7 @@ static unsigned long determine_vm_flags(struct file *file,
 	 * it's being traced - otherwise breakpoints set in it may interfere
 	 * with another untraced process
 	 */
-	if ((flags & MAP_PRIVATE) && (current->ptrace & PT_PTRACED))
+	if ((flags & MAP_PRIVATE) && tracehook_expect_breakpoints(current))
 		vm_flags &= ~VM_MAYSHARE;
 
 	return vm_flags;
-- 
cgit v1.2.3


From c45aea27617d6a1e0aacddc3b0233f704222fcbd Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:50 -0700
Subject: tracehook: tracehook_signal_handler

This defines tracehook_signal_handler() as a hook for the arch signal
handling code to call.  It gives ptrace the opportunity to stop for a
pseudo-single-step trap immediately after signal handler setup is done.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index e113e09b034..2d1426f8e33 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -289,4 +289,27 @@ static inline void tracehook_finish_release_task(struct task_struct *task)
 	ptrace_release_task(task);
 }
 
+/**
+ * tracehook_signal_handler - signal handler setup is complete
+ * @sig:		number of signal being delivered
+ * @info:		siginfo_t of signal being delivered
+ * @ka:			sigaction setting that chose the handler
+ * @regs:		user register state
+ * @stepping:		nonzero if debugger single-step or block-step in use
+ *
+ * Called by the arch code after a signal handler has been set up.
+ * Register and stack state reflects the user handler about to run.
+ * Signal mask changes have already been made.
+ *
+ * Called without locks, shortly before returning to user mode
+ * (or handling more signals).
+ */
+static inline void tracehook_signal_handler(int sig, siginfo_t *info,
+					    const struct k_sigaction *ka,
+					    struct pt_regs *regs, int stepping)
+{
+	if (stepping)
+		ptrace_notify(SIGTRAP);
+}
+
 #endif	/* <linux/tracehook.h> */
-- 
cgit v1.2.3


From 35de254dc60f91004b3b5ebb1fc7b2c3093d6032 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:51 -0700
Subject: tracehook: tracehook_consider_ignored_signal

This defines tracehook_consider_ignored_signal() has a fine-grained hook
for deciding to prevent the normal short-circuit of sending an ignored
signal, as ptrace does.  There is no change, only cleanup.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 19 +++++++++++++++++++
 kernel/signal.c           | 27 ++++++++++++++++-----------
 2 files changed, 35 insertions(+), 11 deletions(-)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 2d1426f8e33..8cffd34f88d 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -312,4 +312,23 @@ static inline void tracehook_signal_handler(int sig, siginfo_t *info,
 		ptrace_notify(SIGTRAP);
 }
 
+/**
+ * tracehook_consider_ignored_signal - suppress short-circuit of ignored signal
+ * @task:		task receiving the signal
+ * @sig:		signal number being sent
+ * @handler:		%SIG_IGN or %SIG_DFL
+ *
+ * Return zero iff tracing doesn't care to examine this ignored signal,
+ * so it can short-circuit normal delivery and never even get queued.
+ * Either @handler is %SIG_DFL and @sig's default is ignore, or it's %SIG_IGN.
+ *
+ * Called with @task->sighand->siglock held.
+ */
+static inline int tracehook_consider_ignored_signal(struct task_struct *task,
+						    int sig,
+						    void __user *handler)
+{
+	return (task_ptrace(task) & PT_PTRACED) != 0;
+}
+
 #endif	/* <linux/tracehook.h> */
diff --git a/kernel/signal.c b/kernel/signal.c
index 8715c18b27b..9efd1cee6d0 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -22,6 +22,7 @@
 #include <linux/ptrace.h>
 #include <linux/signal.h>
 #include <linux/signalfd.h>
+#include <linux/tracehook.h>
 #include <linux/capability.h>
 #include <linux/freezer.h>
 #include <linux/pid_namespace.h>
@@ -39,24 +40,21 @@
 
 static struct kmem_cache *sigqueue_cachep;
 
-static int __sig_ignored(struct task_struct *t, int sig)
+static void __user *sig_handler(struct task_struct *t, int sig)
 {
-	void __user *handler;
+	return t->sighand->action[sig - 1].sa.sa_handler;
+}
 
+static int sig_handler_ignored(void __user *handler, int sig)
+{
 	/* Is it explicitly or implicitly ignored? */
-
-	handler = t->sighand->action[sig - 1].sa.sa_handler;
 	return handler == SIG_IGN ||
 		(handler == SIG_DFL && sig_kernel_ignore(sig));
 }
 
 static int sig_ignored(struct task_struct *t, int sig)
 {
-	/*
-	 * Tracers always want to know about signals..
-	 */
-	if (t->ptrace & PT_PTRACED)
-		return 0;
+	void __user *handler;
 
 	/*
 	 * Blocked signals are never ignored, since the
@@ -66,7 +64,14 @@ static int sig_ignored(struct task_struct *t, int sig)
 	if (sigismember(&t->blocked, sig) || sigismember(&t->real_blocked, sig))
 		return 0;
 
-	return __sig_ignored(t, sig);
+	handler = sig_handler(t, sig);
+	if (!sig_handler_ignored(handler, sig))
+		return 0;
+
+	/*
+	 * Tracers may want to know about even ignored signals.
+	 */
+	return !tracehook_consider_ignored_signal(t, sig, handler);
 }
 
 /*
@@ -2298,7 +2303,7 @@ int do_sigaction(int sig, struct k_sigaction *act, struct k_sigaction *oact)
 		 *   (for example, SIGCHLD), shall cause the pending signal to
 		 *   be discarded, whether or not it is blocked"
 		 */
-		if (__sig_ignored(t, sig)) {
+		if (sig_handler_ignored(sig_handler(t, sig), sig)) {
 			sigemptyset(&mask);
 			sigaddset(&mask, sig);
 			rm_from_queue_full(&mask, &t->signal->shared_pending);
-- 
cgit v1.2.3


From 445a91d2fe3667fb8fc251433645f686933cf56a Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:52 -0700
Subject: tracehook: tracehook_consider_fatal_signal

This defines tracehook_consider_fatal_signal() has a fine-grained hook for
deciding to skip the special cases for a fatal signal, as ptrace does.
There is no change, only cleanup.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 21 +++++++++++++++++++++
 kernel/signal.c           |  9 +++++----
 2 files changed, 26 insertions(+), 4 deletions(-)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 8cffd34f88d..8b4c15e208f 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -331,4 +331,25 @@ static inline int tracehook_consider_ignored_signal(struct task_struct *task,
 	return (task_ptrace(task) & PT_PTRACED) != 0;
 }
 
+/**
+ * tracehook_consider_fatal_signal - suppress special handling of fatal signal
+ * @task:		task receiving the signal
+ * @sig:		signal number being sent
+ * @handler:		%SIG_DFL or %SIG_IGN
+ *
+ * Return nonzero to prevent special handling of this termination signal.
+ * Normally @handler is %SIG_DFL.  It can be %SIG_IGN if @sig is ignored,
+ * in which case force_sig() is about to reset it to %SIG_DFL.
+ * When this returns zero, this signal might cause a quick termination
+ * that does not give the debugger a chance to intercept the signal.
+ *
+ * Called with or without @task->sighand->siglock held.
+ */
+static inline int tracehook_consider_fatal_signal(struct task_struct *task,
+						  int sig,
+						  void __user *handler)
+{
+	return (task_ptrace(task) & PT_PTRACED) != 0;
+}
+
 #endif	/* <linux/tracehook.h> */
diff --git a/kernel/signal.c b/kernel/signal.c
index 9efd1cee6d0..1a942ce32ba 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -300,12 +300,12 @@ flush_signal_handlers(struct task_struct *t, int force_default)
 
 int unhandled_signal(struct task_struct *tsk, int sig)
 {
+	void __user *handler = tsk->sighand->action[sig-1].sa.sa_handler;
 	if (is_global_init(tsk))
 		return 1;
-	if (tsk->ptrace & PT_PTRACED)
+	if (handler != SIG_IGN && handler != SIG_DFL)
 		return 0;
-	return (tsk->sighand->action[sig-1].sa.sa_handler == SIG_IGN) ||
-		(tsk->sighand->action[sig-1].sa.sa_handler == SIG_DFL);
+	return !tracehook_consider_fatal_signal(tsk, sig, handler);
 }
 
 
@@ -761,7 +761,8 @@ static void complete_signal(int sig, struct task_struct *p, int group)
 	if (sig_fatal(p, sig) &&
 	    !(signal->flags & (SIGNAL_UNKILLABLE | SIGNAL_GROUP_EXIT)) &&
 	    !sigismember(&t->real_blocked, sig) &&
-	    (sig == SIGKILL || !(t->ptrace & PT_PTRACED))) {
+	    (sig == SIGKILL ||
+	     !tracehook_consider_fatal_signal(t, sig, SIG_DFL))) {
 		/*
 		 * This signal will be fatal to the whole group.
 		 */
-- 
cgit v1.2.3


From 283d7559e7712f95a05331eb0a85394c6368101b Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:52 -0700
Subject: tracehook: syscall

This adds standard tracehook.h inlines for arch code to call when
TIF_SYSCALL_TRACE has been set.  This replaces having each arch implement
the ptrace guts for its syscall tracing support.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 70 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 8b4c15e208f..3548694a24d 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -66,6 +66,76 @@ static inline int tracehook_expect_breakpoints(struct task_struct *task)
 	return (task_ptrace(task) & PT_PTRACED) != 0;
 }
 
+/*
+ * ptrace report for syscall entry and exit looks identical.
+ */
+static inline void ptrace_report_syscall(struct pt_regs *regs)
+{
+	int ptrace = task_ptrace(current);
+
+	if (!(ptrace & PT_PTRACED))
+		return;
+
+	ptrace_notify(SIGTRAP | ((ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+
+/**
+ * tracehook_report_syscall_entry - task is about to attempt a system call
+ * @regs:		user register state of current task
+ *
+ * This will be called if %TIF_SYSCALL_TRACE has been set, when the
+ * current task has just entered the kernel for a system call.
+ * Full user register state is available here.  Changing the values
+ * in @regs can affect the system call number and arguments to be tried.
+ * It is safe to block here, preventing the system call from beginning.
+ *
+ * Returns zero normally, or nonzero if the calling arch code should abort
+ * the system call.  That must prevent normal entry so no system call is
+ * made.  If @task ever returns to user mode after this, its register state
+ * is unspecified, but should be something harmless like an %ENOSYS error
+ * return.
+ *
+ * Called without locks, just after entering kernel mode.
+ */
+static inline __must_check int tracehook_report_syscall_entry(
+	struct pt_regs *regs)
+{
+	ptrace_report_syscall(regs);
+	return 0;
+}
+
+/**
+ * tracehook_report_syscall_exit - task has just finished a system call
+ * @regs:		user register state of current task
+ * @step:		nonzero if simulating single-step or block-step
+ *
+ * This will be called if %TIF_SYSCALL_TRACE has been set, when the
+ * current task has just finished an attempted system call.  Full
+ * user register state is available here.  It is safe to block here,
+ * preventing signals from being processed.
+ *
+ * If @step is nonzero, this report is also in lieu of the normal
+ * trap that would follow the system call instruction because
+ * user_enable_block_step() or user_enable_single_step() was used.
+ * In this case, %TIF_SYSCALL_TRACE might not be set.
+ *
+ * Called without locks, just before checking for pending signals.
+ */
+static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step)
+{
+	ptrace_report_syscall(regs);
+}
+
 /**
  * tracehook_unsafe_exec - check for exec declared unsafe due to tracing
  * @task:		current task doing exec
-- 
cgit v1.2.3


From 7bcf6a2ca5f639b038c48711ebe6c4eca2036641 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:53 -0700
Subject: tracehook: get_signal_to_deliver

This defines the tracehook_get_signal() hook to allow tracing code to slip
in before normal signal dequeuing.  This lays the groundwork for new
tracing features that can inject synthetic signals outside the normal
queue or control the disposition of delivered signals.  The calling
convention lets tracehook_get_signal() decide both exactly what will
happen and what signal number to report in the handler/exit.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 29 +++++++++++++++++++++++++++++
 kernel/signal.c           | 38 +++++++++++++++++++++++++++-----------
 2 files changed, 56 insertions(+), 11 deletions(-)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 3548694a24d..42a0d7b1195 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -422,4 +422,33 @@ static inline int tracehook_consider_fatal_signal(struct task_struct *task,
 	return (task_ptrace(task) & PT_PTRACED) != 0;
 }
 
+/**
+ * tracehook_get_signal - deliver synthetic signal to traced task
+ * @task:		@current
+ * @regs:		task_pt_regs(@current)
+ * @info:		details of synthetic signal
+ * @return_ka:		sigaction for synthetic signal
+ *
+ * Return zero to check for a real pending signal normally.
+ * Return -1 after releasing the siglock to repeat the check.
+ * Return a signal number to induce an artifical signal delivery,
+ * setting *@info and *@return_ka to specify its details and behavior.
+ *
+ * The @return_ka->sa_handler value controls the disposition of the
+ * signal, no matter the signal number.  For %SIG_DFL, the return value
+ * is a representative signal to indicate the behavior (e.g. %SIGTERM
+ * for death, %SIGQUIT for core dump, %SIGSTOP for job control stop,
+ * %SIGTSTP for stop unless in an orphaned pgrp), but the signal number
+ * reported will be @info->si_signo instead.
+ *
+ * Called with @task->sighand->siglock held, before dequeuing pending signals.
+ */
+static inline int tracehook_get_signal(struct task_struct *task,
+				       struct pt_regs *regs,
+				       siginfo_t *info,
+				       struct k_sigaction *return_ka)
+{
+	return 0;
+}
+
 #endif	/* <linux/tracehook.h> */
diff --git a/kernel/signal.c b/kernel/signal.c
index 1a942ce32ba..10b31ecdd9c 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1754,17 +1754,33 @@ relock:
 		    do_signal_stop(0))
 			goto relock;
 
-		signr = dequeue_signal(current, &current->blocked, info);
-		if (!signr)
-			break; /* will return 0 */
+		/*
+		 * Tracing can induce an artifical signal and choose sigaction.
+		 * The return value in @signr determines the default action,
+		 * but @info->si_signo is the signal number we will report.
+		 */
+		signr = tracehook_get_signal(current, regs, info, return_ka);
+		if (unlikely(signr < 0))
+			goto relock;
+		if (unlikely(signr != 0))
+			ka = return_ka;
+		else {
+			signr = dequeue_signal(current, &current->blocked,
+					       info);
 
-		if (signr != SIGKILL) {
-			signr = ptrace_signal(signr, info, regs, cookie);
 			if (!signr)
-				continue;
+				break; /* will return 0 */
+
+			if (signr != SIGKILL) {
+				signr = ptrace_signal(signr, info,
+						      regs, cookie);
+				if (!signr)
+					continue;
+			}
+
+			ka = &sighand->action[signr-1];
 		}
 
-		ka = &sighand->action[signr-1];
 		if (ka->sa.sa_handler == SIG_IGN) /* Do nothing.  */
 			continue;
 		if (ka->sa.sa_handler != SIG_DFL) {
@@ -1812,7 +1828,7 @@ relock:
 				spin_lock_irq(&sighand->siglock);
 			}
 
-			if (likely(do_signal_stop(signr))) {
+			if (likely(do_signal_stop(info->si_signo))) {
 				/* It released the siglock.  */
 				goto relock;
 			}
@@ -1833,7 +1849,7 @@ relock:
 
 		if (sig_kernel_coredump(signr)) {
 			if (print_fatal_signals)
-				print_fatal_signal(regs, signr);
+				print_fatal_signal(regs, info->si_signo);
 			/*
 			 * If it was able to dump core, this kills all
 			 * other threads in the group and synchronizes with
@@ -1842,13 +1858,13 @@ relock:
 			 * first and our do_group_exit call below will use
 			 * that value and ignore the one we pass it.
 			 */
-			do_coredump((long)signr, signr, regs);
+			do_coredump(info->si_signo, info->si_signo, regs);
 		}
 
 		/*
 		 * Death signals, no core dump.
 		 */
-		do_group_exit(signr);
+		do_group_exit(info->si_signo);
 		/* NOTREACHED */
 	}
 	spin_unlock_irq(&sighand->siglock);
-- 
cgit v1.2.3


From fa00b80b3c41a845b3d56f866fb40a2e98754c51 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:54 -0700
Subject: tracehook: job control

This defines the tracehook_notify_jctl() hook to formalize the ptrace
effects on the job control notifications.  There is no change, only
cleanup.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 20 ++++++++++++++++++++
 kernel/signal.c           | 10 +++++-----
 2 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 42a0d7b1195..6dc428dd2f3 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -451,4 +451,24 @@ static inline int tracehook_get_signal(struct task_struct *task,
 	return 0;
 }
 
+/**
+ * tracehook_notify_jctl - report about job control stop/continue
+ * @notify:		nonzero if this is the last thread in the group to stop
+ * @why:		%CLD_STOPPED or %CLD_CONTINUED
+ *
+ * This is called when we might call do_notify_parent_cldstop().
+ * It's called when about to stop for job control; we are already in
+ * %TASK_STOPPED state, about to call schedule().  It's also called when
+ * a delayed %CLD_STOPPED or %CLD_CONTINUED report is ready to be made.
+ *
+ * Return nonzero to generate a %SIGCHLD with @why, which is
+ * normal if @notify is nonzero.
+ *
+ * Called with no locks held.
+ */
+static inline int tracehook_notify_jctl(int notify, int why)
+{
+	return notify || (current->ptrace & PT_PTRACED);
+}
+
 #endif	/* <linux/tracehook.h> */
diff --git a/kernel/signal.c b/kernel/signal.c
index 10b31ecdd9c..e9e699f4b1b 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -596,9 +596,6 @@ static int check_kill_permission(int sig, struct siginfo *info,
 	return security_task_kill(t, info, sig, 0);
 }
 
-/* forward decl */
-static void do_notify_parent_cldstop(struct task_struct *tsk, int why);
-
 /*
  * Handle magic process-wide effects of stop/continue signals. Unlike
  * the signal actions, these happen immediately at signal-generation
@@ -1605,7 +1602,7 @@ finish_stop(int stop_count)
 	 * a group stop in progress and we are the last to stop,
 	 * report to the parent.  When ptraced, every thread reports itself.
 	 */
-	if (stop_count == 0 || (current->ptrace & PT_PTRACED)) {
+	if (tracehook_notify_jctl(stop_count == 0, CLD_STOPPED)) {
 		read_lock(&tasklist_lock);
 		do_notify_parent_cldstop(current, CLD_STOPPED);
 		read_unlock(&tasklist_lock);
@@ -1741,6 +1738,9 @@ relock:
 		signal->flags &= ~SIGNAL_CLD_MASK;
 		spin_unlock_irq(&sighand->siglock);
 
+		if (unlikely(!tracehook_notify_jctl(1, why)))
+			goto relock;
+
 		read_lock(&tasklist_lock);
 		do_notify_parent_cldstop(current->group_leader, why);
 		read_unlock(&tasklist_lock);
@@ -1906,7 +1906,7 @@ void exit_signals(struct task_struct *tsk)
 out:
 	spin_unlock_irq(&tsk->sighand->siglock);
 
-	if (unlikely(group_stop)) {
+	if (unlikely(group_stop) && tracehook_notify_jctl(1, CLD_STOPPED)) {
 		read_lock(&tasklist_lock);
 		do_notify_parent_cldstop(tsk, CLD_STOPPED);
 		read_unlock(&tasklist_lock);
-- 
cgit v1.2.3


From 2b2a1ff64afbadac842bbc58c5166962cf4f7664 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:54 -0700
Subject: tracehook: death

This moves the ptrace logic in task death (exit_notify) into tracehook.h
inlines.  Some code is rearranged slightly to make things nicer.  There is
no change, only cleanup.

There is one hook called with the tasklist_lock write-locked, as ptrace
needs.  There is also a new hook called after exit_state changes and
without locks.  This is a better place for tracing work to be in the
future, since it doesn't delay the whole system with locking.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/sched.h     |  2 +-
 include/linux/tracehook.h | 52 +++++++++++++++++++++++++++++++++++++++++++++++
 kernel/exit.c             | 26 ++++++++----------------
 kernel/signal.c           | 10 ++++++---
 4 files changed, 69 insertions(+), 21 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index adb8077dc46..a95d84d0da9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1796,7 +1796,7 @@ extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *, uid_t, uid_
 extern int kill_pgrp(struct pid *pid, int sig, int priv);
 extern int kill_pid(struct pid *pid, int sig, int priv);
 extern int kill_proc_info(int, struct siginfo *, pid_t);
-extern void do_notify_parent(struct task_struct *, int);
+extern int do_notify_parent(struct task_struct *, int);
 extern void force_sig(int, struct task_struct *);
 extern void force_sig_specific(int, struct task_struct *);
 extern int send_sig(int, struct task_struct *, int);
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 6dc428dd2f3..4c50e1b5734 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -471,4 +471,56 @@ static inline int tracehook_notify_jctl(int notify, int why)
 	return notify || (current->ptrace & PT_PTRACED);
 }
 
+/**
+ * tracehook_notify_death - task is dead, ready to notify parent
+ * @task:		@current task now exiting
+ * @death_cookie:	value to pass to tracehook_report_death()
+ * @group_dead:		nonzero if this was the last thread in the group to die
+ *
+ * Return the signal number to send our parent with do_notify_parent(), or
+ * zero to send no signal and leave a zombie, or -1 to self-reap right now.
+ *
+ * Called with write_lock_irq(&tasklist_lock) held.
+ */
+static inline int tracehook_notify_death(struct task_struct *task,
+					 void **death_cookie, int group_dead)
+{
+	if (task->exit_signal == -1)
+		return task->ptrace ? SIGCHLD : -1;
+
+	/*
+	 * If something other than our normal parent is ptracing us, then
+	 * send it a SIGCHLD instead of honoring exit_signal.  exit_signal
+	 * only has special meaning to our real parent.
+	 */
+	if (thread_group_empty(task) && !ptrace_reparented(task))
+		return task->exit_signal;
+
+	return task->ptrace ? SIGCHLD : 0;
+}
+
+/**
+ * tracehook_report_death - task is dead and ready to be reaped
+ * @task:		@current task now exiting
+ * @signal:		signal number sent to parent, or 0 or -1
+ * @death_cookie:	value passed back from tracehook_notify_death()
+ * @group_dead:		nonzero if this was the last thread in the group to die
+ *
+ * Thread has just become a zombie or is about to self-reap.  If positive,
+ * @signal is the signal number just sent to the parent (usually %SIGCHLD).
+ * If @signal is -1, this thread will self-reap.  If @signal is 0, this is
+ * a delayed_group_leader() zombie.  The @death_cookie was passed back by
+ * tracehook_notify_death().
+ *
+ * If normal reaping is not inhibited, @task->exit_state might be changing
+ * in parallel.
+ *
+ * Called without locks.
+ */
+static inline void tracehook_report_death(struct task_struct *task,
+					  int signal, void *death_cookie,
+					  int group_dead)
+{
+}
+
 #endif	/* <linux/tracehook.h> */
diff --git a/kernel/exit.c b/kernel/exit.c
index da28745f7c3..6cdf60712bd 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -885,7 +885,8 @@ static void forget_original_parent(struct task_struct *father)
  */
 static void exit_notify(struct task_struct *tsk, int group_dead)
 {
-	int state;
+	int signal;
+	void *cookie;
 
 	/*
 	 * This does two things:
@@ -922,22 +923,11 @@ static void exit_notify(struct task_struct *tsk, int group_dead)
 	    !capable(CAP_KILL))
 		tsk->exit_signal = SIGCHLD;
 
-	/* If something other than our normal parent is ptracing us, then
-	 * send it a SIGCHLD instead of honoring exit_signal.  exit_signal
-	 * only has special meaning to our real parent.
-	 */
-	if (!task_detached(tsk) && thread_group_empty(tsk)) {
-		int signal = ptrace_reparented(tsk) ?
-				SIGCHLD : tsk->exit_signal;
-		do_notify_parent(tsk, signal);
-	} else if (tsk->ptrace) {
-		do_notify_parent(tsk, SIGCHLD);
-	}
+	signal = tracehook_notify_death(tsk, &cookie, group_dead);
+	if (signal > 0)
+		signal = do_notify_parent(tsk, signal);
 
-	state = EXIT_ZOMBIE;
-	if (task_detached(tsk) && likely(!tsk->ptrace))
-		state = EXIT_DEAD;
-	tsk->exit_state = state;
+	tsk->exit_state = signal < 0 ? EXIT_DEAD : EXIT_ZOMBIE;
 
 	/* mt-exec, de_thread() is waiting for us */
 	if (thread_group_leader(tsk) &&
@@ -947,8 +937,10 @@ static void exit_notify(struct task_struct *tsk, int group_dead)
 
 	write_unlock_irq(&tasklist_lock);
 
+	tracehook_report_death(tsk, signal, cookie, group_dead);
+
 	/* If the process is dead, release it - nobody will wait for it */
-	if (state == EXIT_DEAD)
+	if (signal < 0)
 		release_task(tsk);
 }
 
diff --git a/kernel/signal.c b/kernel/signal.c
index e9e699f4b1b..0e862d3130f 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1326,9 +1326,11 @@ static inline void __wake_up_parent(struct task_struct *p,
 /*
  * Let a parent know about the death of a child.
  * For a stopped/continued status change, use do_notify_parent_cldstop instead.
+ *
+ * Returns -1 if our parent ignored us and so we've switched to
+ * self-reaping, or else @sig.
  */
-
-void do_notify_parent(struct task_struct *tsk, int sig)
+int do_notify_parent(struct task_struct *tsk, int sig)
 {
 	struct siginfo info;
 	unsigned long flags;
@@ -1399,12 +1401,14 @@ void do_notify_parent(struct task_struct *tsk, int sig)
 		 */
 		tsk->exit_signal = -1;
 		if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
-			sig = 0;
+			sig = -1;
 	}
 	if (valid_signal(sig) && sig > 0)
 		__group_send_sig_info(sig, &info, tsk->parent);
 	__wake_up_parent(tsk, tsk->parent);
 	spin_unlock_irqrestore(&psig->siglock, flags);
+
+	return sig;
 }
 
 static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
-- 
cgit v1.2.3


From b787f7ba677840da16a2228c16571ce8a1fcb799 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:55 -0700
Subject: tracehook: force signal_pending()

This defines a new hook tracehook_force_sigpending() that lets tracing
code decide to force TIF_SIGPENDING on in recalc_sigpending().

This is not used yet, so it compiles away to nothing for now.  It lays the
groundwork for new tracing code that can interrupt a task synthetically
without actually sending a signal.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 14 ++++++++++++++
 kernel/signal.c           |  4 +++-
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 4c50e1b5734..43bc51b6bd3 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -422,6 +422,20 @@ static inline int tracehook_consider_fatal_signal(struct task_struct *task,
 	return (task_ptrace(task) & PT_PTRACED) != 0;
 }
 
+/**
+ * tracehook_force_sigpending - let tracing force signal_pending(current) on
+ *
+ * Called when recomputing our signal_pending() flag.  Return nonzero
+ * to force the signal_pending() flag on, so that tracehook_get_signal()
+ * will be called before the next return to user mode.
+ *
+ * Called with @current->sighand->siglock held.
+ */
+static inline int tracehook_force_sigpending(void)
+{
+	return 0;
+}
+
 /**
  * tracehook_get_signal - deliver synthetic signal to traced task
  * @task:		@current
diff --git a/kernel/signal.c b/kernel/signal.c
index 0e862d3130f..954f77d7e3b 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -134,7 +134,9 @@ void recalc_sigpending_and_wake(struct task_struct *t)
 
 void recalc_sigpending(void)
 {
-	if (!recalc_sigpending_tsk(current) && !freezing(current))
+	if (unlikely(tracehook_force_sigpending()))
+		set_thread_flag(TIF_SIGPENDING);
+	else if (!recalc_sigpending_tsk(current) && !freezing(current))
 		clear_thread_flag(TIF_SIGPENDING);
 
 }
-- 
cgit v1.2.3


From 64b1208d5b0ef8859fd52ea7ae286a3eb994669b Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:56 -0700
Subject: tracehook: TIF_NOTIFY_RESUME

This adds tracehook.h inlines to enable a new arch feature in support of
user debugging/tracing.  This is not used yet, but it lays the groundwork
for a debugger to be able to wrangle a task that's possibly running,
without interrupting its syscalls in progress.

Each arch should define TIF_NOTIFY_RESUME, and in their entry.S code treat
it much like TIF_SIGPENDING.  That is, it causes you to take the slow path
when returning to user mode, where you get the full user-mode state
accessible as for signal handling or ptrace.  The arch code should check
TIF_NOTIFY_RESUME after handling TIF_SIGPENDING.  When it's set, clear it
and then call tracehook_notify_resume().

In future, tracing code will call set_notify_resume() when it wants to get
a callback in tracehook_notify_resume().

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/tracehook.h | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 43bc51b6bd3..32867ab86c7 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -537,4 +537,38 @@ static inline void tracehook_report_death(struct task_struct *task,
 {
 }
 
+#ifdef TIF_NOTIFY_RESUME
+/**
+ * set_notify_resume - cause tracehook_notify_resume() to be called
+ * @task:		task that will call tracehook_notify_resume()
+ *
+ * Calling this arranges that @task will call tracehook_notify_resume()
+ * before returning to user mode.  If it's already running in user mode,
+ * it will enter the kernel and call tracehook_notify_resume() soon.
+ * If it's blocked, it will not be woken.
+ */
+static inline void set_notify_resume(struct task_struct *task)
+{
+	if (!test_and_set_tsk_thread_flag(task, TIF_NOTIFY_RESUME))
+		kick_process(task);
+}
+
+/**
+ * tracehook_notify_resume - report when about to return to user mode
+ * @regs:		user-mode registers of @current task
+ *
+ * This is called when %TIF_NOTIFY_RESUME has been set.  Now we are
+ * about to return to user mode, and the user state in @regs can be
+ * inspected or adjusted.  The caller in arch code has cleared
+ * %TIF_NOTIFY_RESUME before the call.  If the flag gets set again
+ * asynchronously, this will be called again before we return to
+ * user mode.
+ *
+ * Called without locks.
+ */
+static inline void tracehook_notify_resume(struct pt_regs *regs)
+{
+}
+#endif	/* TIF_NOTIFY_RESUME */
+
 #endif	/* <linux/tracehook.h> */
-- 
cgit v1.2.3


From 828c365cc8b8d38c346fccb19fa80d28f2240831 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:57 -0700
Subject: tracehook: asm/syscall.h

This adds asm-generic/syscall.h, which documents what a real
asm-ARCH/syscall.h file should define.  This is not used yet, but will
provide all the machine-dependent details of examining a user system call
about to begin, in progress, or just ended.

Each arch should add an asm-ARCH/syscall.h that defines all the entry
points documented in asm-generic/syscall.h, as short inlines if possible.
This lets us write new tracing code that understands user system call
registers, without any new arch-specific work.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/syscall.h | 141 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/tracehook.h     |   3 +-
 2 files changed, 143 insertions(+), 1 deletion(-)
 create mode 100644 include/asm-generic/syscall.h

diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h
new file mode 100644
index 00000000000..abcf34c2fdc
--- /dev/null
+++ b/include/asm-generic/syscall.h
@@ -0,0 +1,141 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * This file is a stub providing documentation for what functions
+ * asm-ARCH/syscall.h files need to define.  Most arch definitions
+ * will be simple inlines.
+ *
+ * All of these functions expect to be called with no locks,
+ * and only when the caller is sure that the task of interest
+ * cannot return to user mode while we are looking at it.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+struct task_struct;
+struct pt_regs;
+
+/**
+ * syscall_get_nr - find what system call a task is executing
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * If @task is executing a system call or is at system call
+ * tracing about to attempt one, returns the system call number.
+ * If @task is not executing a system call, i.e. it's blocked
+ * inside the kernel for a fault or signal, returns -1.
+ *
+ * It's only valid to call this when @task is known to be blocked.
+ */
+long syscall_get_nr(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_rollback - roll back registers after an aborted system call
+ * @task:	task of interest, must be in system call exit tracing
+ * @regs:	task_pt_regs() of @task
+ *
+ * It's only valid to call this when @task is stopped for system
+ * call exit tracing (due to TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT),
+ * after tracehook_report_syscall_entry() returned nonzero to prevent
+ * the system call from taking place.
+ *
+ * This rolls back the register state in @regs so it's as if the
+ * system call instruction was a no-op.  The registers containing
+ * the system call number and arguments are as they were before the
+ * system call instruction.  This may not be the same as what the
+ * register state looked like at system call entry tracing.
+ */
+void syscall_rollback(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_error - check result of traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns 0 if the system call succeeded, or -ERRORCODE if it failed.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+long syscall_get_error(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_return_value - get the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns the return value of the successful system call.
+ * This value is meaningless if syscall_get_error() returned nonzero.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_set_return_value - change the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @error:	negative error code, or zero to indicate success
+ * @val:	user return value if @error is zero
+ *
+ * This changes the results of the system call that user mode will see.
+ * If @error is zero, the user sees a successful system call with a
+ * return value of @val.  If @error is nonzero, it's a negated errno
+ * code; the user sees a failed system call with this errno code.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+			      int error, long val);
+
+/**
+ * syscall_get_arguments - extract system call parameter values
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @i:		argument index [0,5]
+ * @n:		number of arguments; n+i must be [1,6].
+ * @args:	array filled with argument values
+ *
+ * Fetches @n arguments to the system call starting with the @i'th argument
+ * (from 0 through 5).  Argument @i is stored in @args[0], and so on.
+ * An arch inline version is probably optimal when @i and @n are constants.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ * It's invalid to call this with @i + @n > 6; we only support system calls
+ * taking up to 6 arguments.
+ */
+void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+			   unsigned int i, unsigned int n, unsigned long *args);
+
+/**
+ * syscall_set_arguments - change system call parameter value
+ * @task:	task of interest, must be in system call entry tracing
+ * @regs:	task_pt_regs() of @task
+ * @i:		argument index [0,5]
+ * @n:		number of arguments; n+i must be [1,6].
+ * @args:	array of argument values to store
+ *
+ * Changes @n arguments to the system call starting with the @i'th argument.
+ * @n'th argument to @val.  Argument @i gets value @args[0], and so on.
+ * An arch inline version is probably optimal when @i and @n are constants.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ * It's invalid to call this with @i + @n > 6; we only support system calls
+ * taking up to 6 arguments.
+ */
+void syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+			   unsigned int i, unsigned int n,
+			   const unsigned long *args);
+
+#endif	/* _ASM_SYSCALL_H */
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 32867ab86c7..589f429619c 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -103,7 +103,8 @@ static inline void ptrace_report_syscall(struct pt_regs *regs)
  * the system call.  That must prevent normal entry so no system call is
  * made.  If @task ever returns to user mode after this, its register state
  * is unspecified, but should be something harmless like an %ENOSYS error
- * return.
+ * return.  It should preserve enough information so that syscall_rollback()
+ * can work (see asm-generic/syscall.h).
  *
  * Called without locks, just after entering kernel mode.
  */
-- 
cgit v1.2.3


From 1f5a4ad97a0e7b663d527ecc02aabe203d000d91 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:57 -0700
Subject: tracehook: CONFIG_HAVE_ARCH_TRACEHOOK

This adds the generic HAVE_ARCH_TRACEHOOK kconfig item.  Each arch should
add to some Kconfig file:

	select HAVE_ARCH_TRACEHOOK

if the arch code uses all the latest hooks to enable newfangled tracing
and debugging code.  The comment in arch/Kconfig lists all the
prerequisite arch support.  When all these are available, setting
HAVE_ARCH_TRACEHOOK will allow enabling any new features that depend on
the modern arch interfaces.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/Kconfig | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/Kconfig b/arch/Kconfig
index b0fabfa864f..364c6dadde0 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -59,6 +59,24 @@ config HAVE_KPROBES
 config HAVE_KRETPROBES
 	def_bool n
 
+#
+# An arch should select this if it provides all these things:
+#
+#	task_pt_regs()		in asm/processor.h or asm/ptrace.h
+#	arch_has_single_step()	if there is hardware single-step support
+#	arch_has_block_step()	if there is hardware block-step support
+#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
+#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
+#	asm/syscall.h		supplying asm-generic/syscall.h interface
+#	linux/regset.h		user_regset interfaces
+#	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
+#	TIF_SYSCALL_TRACE	calls tracehook_report_syscall_{entry,exit}
+#	TIF_NOTIFY_RESUME	calls tracehook_notify_resume()
+#	signal delivery		calls tracehook_signal_handler()
+#
+config HAVE_ARCH_TRACEHOOK
+	def_bool n
+
 config HAVE_DMA_ATTRS
 	def_bool n
 
-- 
cgit v1.2.3


From 85ba2d862e521375a8ee01526c5c46b1f24bb4af Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:58 -0700
Subject: tracehook: wait_task_inactive

This extends wait_task_inactive() with a new argument so it can be used in
a "soft" mode where it will check for the task changing state unexpectedly
and back off.  There is no change to existing callers.  This lays the
groundwork to allow robust, noninvasive tracing that can try to sample a
blocked thread but back off safely if it wakes up.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/kernel/perfmon.c |  4 ++--
 include/linux/sched.h      |  8 ++++++--
 kernel/kthread.c           |  2 +-
 kernel/ptrace.c            |  2 +-
 kernel/sched.c             | 29 +++++++++++++++++++++++++++--
 5 files changed, 37 insertions(+), 8 deletions(-)

diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 19d4493c619..fc8f3509df2 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2626,7 +2626,7 @@ pfm_task_incompatible(pfm_context_t *ctx, struct task_struct *task)
 	/*
 	 * make sure the task is off any CPU
 	 */
-	wait_task_inactive(task);
+	wait_task_inactive(task, 0);
 
 	/* more to come... */
 
@@ -4774,7 +4774,7 @@ recheck:
 
 		UNPROTECT_CTX(ctx, flags);
 
-		wait_task_inactive(task);
+		wait_task_inactive(task, 0);
 
 		PROTECT_CTX(ctx, flags);
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index a95d84d0da9..f59318a0099 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1882,9 +1882,13 @@ extern void set_task_comm(struct task_struct *tsk, char *from);
 extern char *get_task_comm(char *to, struct task_struct *tsk);
 
 #ifdef CONFIG_SMP
-extern void wait_task_inactive(struct task_struct * p);
+extern unsigned long wait_task_inactive(struct task_struct *, long match_state);
 #else
-#define wait_task_inactive(p)	do { } while (0)
+static inline unsigned long wait_task_inactive(struct task_struct *p,
+					       long match_state)
+{
+	return 1;
+}
 #endif
 
 #define next_task(p)	list_entry(rcu_dereference((p)->tasks.next), struct task_struct, tasks)
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 6111c27491b..96cff2f8710 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -176,7 +176,7 @@ void kthread_bind(struct task_struct *k, unsigned int cpu)
 		return;
 	}
 	/* Must have done schedule() in kthread() before we set_task_cpu */
-	wait_task_inactive(k);
+	wait_task_inactive(k, 0);
 	set_task_cpu(k, cpu);
 	k->cpus_allowed = cpumask_of_cpu(cpu);
 	k->rt.nr_cpus_allowed = 1;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 8392a9da645..082b3fcb32a 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -107,7 +107,7 @@ int ptrace_check_attach(struct task_struct *child, int kill)
 	read_unlock(&tasklist_lock);
 
 	if (!ret && !kill)
-		wait_task_inactive(child);
+		ret = wait_task_inactive(child, TASK_TRACED) ? 0 : -ESRCH;
 
 	/* All systems go.. */
 	return ret;
diff --git a/kernel/sched.c b/kernel/sched.c
index fde1a102635..0236958addc 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1867,16 +1867,24 @@ migrate_task(struct task_struct *p, int dest_cpu, struct migration_req *req)
 /*
  * wait_task_inactive - wait for a thread to unschedule.
  *
+ * If @match_state is nonzero, it's the @p->state value just checked and
+ * not expected to change.  If it changes, i.e. @p might have woken up,
+ * then return zero.  When we succeed in waiting for @p to be off its CPU,
+ * we return a positive number (its total switch count).  If a second call
+ * a short while later returns the same number, the caller can be sure that
+ * @p has remained unscheduled the whole time.
+ *
  * The caller must ensure that the task *will* unschedule sometime soon,
  * else this function might spin for a *long* time. This function can't
  * be called with interrupts off, or it may introduce deadlock with
  * smp_call_function() if an IPI is sent by the same process we are
  * waiting to become inactive.
  */
-void wait_task_inactive(struct task_struct *p)
+unsigned long wait_task_inactive(struct task_struct *p, long match_state)
 {
 	unsigned long flags;
 	int running, on_rq;
+	unsigned long ncsw;
 	struct rq *rq;
 
 	for (;;) {
@@ -1899,8 +1907,11 @@ void wait_task_inactive(struct task_struct *p)
 		 * return false if the runqueue has changed and p
 		 * is actually now running somewhere else!
 		 */
-		while (task_running(rq, p))
+		while (task_running(rq, p)) {
+			if (match_state && unlikely(p->state != match_state))
+				return 0;
 			cpu_relax();
+		}
 
 		/*
 		 * Ok, time to look more closely! We need the rq
@@ -1910,8 +1921,20 @@ void wait_task_inactive(struct task_struct *p)
 		rq = task_rq_lock(p, &flags);
 		running = task_running(rq, p);
 		on_rq = p->se.on_rq;
+		ncsw = 0;
+		if (!match_state || p->state == match_state) {
+			ncsw = p->nivcsw + p->nvcsw;
+			if (unlikely(!ncsw))
+				ncsw = 1;
+		}
 		task_rq_unlock(rq, &flags);
 
+		/*
+		 * If it changed from the expected state, bail out now.
+		 */
+		if (unlikely(!ncsw))
+			break;
+
 		/*
 		 * Was it really running after all now that we
 		 * checked with the proper locks actually held?
@@ -1944,6 +1967,8 @@ void wait_task_inactive(struct task_struct *p)
 		 */
 		break;
 	}
+
+	return ncsw;
 }
 
 /***
-- 
cgit v1.2.3


From bbc698636ed48b6fcd323964e0f847a6a796325d Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:45:59 -0700
Subject: task_current_syscall

This adds the new function task_current_syscall() on machines where the
asm/syscall.h interface is supported (CONFIG_HAVE_ARCH_TRACEHOOK).  It's
exported for modules to use in the future.  This function safely samples
the state of a blocked thread to collect what system call it is blocked
in, and the six system call argument registers.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ptrace.h |  4 +++
 lib/Makefile           |  2 ++
 lib/syscall.c          | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 81 insertions(+)
 create mode 100644 lib/syscall.c

diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index ed69c03692d..fd31756e1a0 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -314,6 +314,10 @@ static inline void user_enable_block_step(struct task_struct *task)
 #define arch_ptrace_stop(code, info)		do { } while (0)
 #endif
 
+extern int task_current_syscall(struct task_struct *target, long *callno,
+				unsigned long args[6], unsigned int maxargs,
+				unsigned long *sp, unsigned long *pc);
+
 #endif
 
 #endif
diff --git a/lib/Makefile b/lib/Makefile
index 9085ad6fa53..942c7250f60 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -78,6 +78,8 @@ lib-$(CONFIG_GENERIC_BUG) += bug.o
 
 obj-$(CONFIG_HAVE_LMB) += lmb.o
 
+obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/lib/syscall.c b/lib/syscall.c
new file mode 100644
index 00000000000..a4f7067f72f
--- /dev/null
+++ b/lib/syscall.c
@@ -0,0 +1,75 @@
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <asm/syscall.h>
+
+static int collect_syscall(struct task_struct *target, long *callno,
+			   unsigned long args[6], unsigned int maxargs,
+			   unsigned long *sp, unsigned long *pc)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	if (unlikely(!regs))
+		return -EAGAIN;
+
+	*sp = user_stack_pointer(regs);
+	*pc = instruction_pointer(regs);
+
+	*callno = syscall_get_nr(target, regs);
+	if (*callno != -1L && maxargs > 0)
+		syscall_get_arguments(target, regs, 0, maxargs, args);
+
+	return 0;
+}
+
+/**
+ * task_current_syscall - Discover what a blocked task is doing.
+ * @target:		thread to examine
+ * @callno:		filled with system call number or -1
+ * @args:		filled with @maxargs system call arguments
+ * @maxargs:		number of elements in @args to fill
+ * @sp:			filled with user stack pointer
+ * @pc:			filled with user PC
+ *
+ * If @target is blocked in a system call, returns zero with *@callno
+ * set to the the call's number and @args filled in with its arguments.
+ * Registers not used for system call arguments may not be available and
+ * it is not kosher to use &struct user_regset calls while the system
+ * call is still in progress.  Note we may get this result if @target
+ * has finished its system call but not yet returned to user mode, such
+ * as when it's stopped for signal handling or syscall exit tracing.
+ *
+ * If @target is blocked in the kernel during a fault or exception,
+ * returns zero with *@callno set to -1 and does not fill in @args.
+ * If so, it's now safe to examine @target using &struct user_regset
+ * get() calls as long as we're sure @target won't return to user mode.
+ *
+ * Returns -%EAGAIN if @target does not remain blocked.
+ *
+ * Returns -%EINVAL if @maxargs is too large (maximum is six).
+ */
+int task_current_syscall(struct task_struct *target, long *callno,
+			 unsigned long args[6], unsigned int maxargs,
+			 unsigned long *sp, unsigned long *pc)
+{
+	long state;
+	unsigned long ncsw;
+
+	if (unlikely(maxargs > 6))
+		return -EINVAL;
+
+	if (target == current)
+		return collect_syscall(target, callno, args, maxargs, sp, pc);
+
+	state = target->state;
+	if (unlikely(!state))
+		return -EAGAIN;
+
+	ncsw = wait_task_inactive(target, state);
+	if (unlikely(!ncsw) ||
+	    unlikely(collect_syscall(target, callno, args, maxargs, sp, pc)) ||
+	    unlikely(wait_task_inactive(target, state) != ncsw))
+		return -EAGAIN;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(task_current_syscall);
-- 
cgit v1.2.3


From ebcb67341fee34061430f3367f2e507e52ee051b Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 25 Jul 2008 19:46:00 -0700
Subject: /proc/PID/syscall

This adds /proc/PID/syscall and /proc/PID/task/TID/syscall magic files.
These use task_current_syscall() to show the task's current system call
number and argument registers, stack pointer and PC.  For a task blocked
but not in a syscall, the file shows "-1" in place of the syscall number,
followed by only the SP and PC.  For a task that's not blocked, it shows
"running".

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/base.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index 4b74dba69a6..81bce6791bf 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -509,6 +509,26 @@ static int proc_pid_limits(struct task_struct *task, char *buffer)
 	return count;
 }
 
+#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
+static int proc_pid_syscall(struct task_struct *task, char *buffer)
+{
+	long nr;
+	unsigned long args[6], sp, pc;
+
+	if (task_current_syscall(task, &nr, args, 6, &sp, &pc))
+		return sprintf(buffer, "running\n");
+
+	if (nr < 0)
+		return sprintf(buffer, "%ld 0x%lx 0x%lx\n", nr, sp, pc);
+
+	return sprintf(buffer,
+		       "%ld 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n",
+		       nr,
+		       args[0], args[1], args[2], args[3], args[4], args[5],
+		       sp, pc);
+}
+#endif /* CONFIG_HAVE_ARCH_TRACEHOOK */
+
 /************************************************************************/
 /*                       Here the fs part begins                        */
 /************************************************************************/
@@ -2477,6 +2497,9 @@ static const struct pid_entry tgid_base_stuff[] = {
 	INF("limits",	  S_IRUSR, pid_limits),
 #ifdef CONFIG_SCHED_DEBUG
 	REG("sched",      S_IRUGO|S_IWUSR, pid_sched),
+#endif
+#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
+	INF("syscall",    S_IRUSR, pid_syscall),
 #endif
 	INF("cmdline",    S_IRUGO, pid_cmdline),
 	ONE("stat",       S_IRUGO, tgid_stat),
@@ -2809,6 +2832,9 @@ static const struct pid_entry tid_base_stuff[] = {
 	INF("limits",	 S_IRUSR, pid_limits),
 #ifdef CONFIG_SCHED_DEBUG
 	REG("sched",     S_IRUGO|S_IWUSR, pid_sched),
+#endif
+#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
+	INF("syscall",   S_IRUSR, pid_syscall),
 #endif
 	INF("cmdline",   S_IRUGO, pid_cmdline),
 	ONE("stat",      S_IRUGO, tid_stat),
-- 
cgit v1.2.3


From 2c97b7fc0d8c8661981beb9517da342ced3b3bc7 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:01 -0700
Subject: mm: print swapcache page count in show_swap_cache_info()

Every arch implements its own show_mem() function.  Most of them share
quite some code, some of them are completely identical.

This series implements a generic version of this function and migrates
almost all architectures to it.

This patch:

Most show_mem() implementations calculate the amount of pages within
the swapcache every time.  Move the output to a more appropriate place
and use the anyway available total_swapcache_pages variable.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/swap_state.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/swap_state.c b/mm/swap_state.c
index 2c217e33d49..b8035b05512 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -56,7 +56,8 @@ static struct {
 
 void show_swap_cache_info(void)
 {
-	printk("Swap cache: add %lu, delete %lu, find %lu/%lu\n",
+	printk("%lu pages in swap cache\n", total_swapcache_pages);
+	printk("Swap cache stats: add %lu, delete %lu, find %lu/%lu\n",
 		swap_cache_info.add_total, swap_cache_info.del_total,
 		swap_cache_info.find_success, swap_cache_info.find_total);
 	printk("Free swap  = %lukB\n", nr_swap_pages << (PAGE_SHIFT - 10));
-- 
cgit v1.2.3


From 454c63b02e530f10b4345343f63596dd705888d0 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:07 -0700
Subject: lib: generic show_mem()

This implements a platform-independent version of show_mem().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/Makefile   |  2 +-
 lib/show_mem.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+), 1 deletion(-)
 create mode 100644 lib/show_mem.c

diff --git a/lib/Makefile b/lib/Makefile
index 942c7250f60..3b1f94bbe9d 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -11,7 +11,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 rbtree.o radix-tree.o dump_stack.o \
 	 idr.o int_sqrt.o extable.o prio_tree.o \
 	 sha1.o irq_regs.o reciprocal_div.o argv_split.o \
-	 proportions.o prio_heap.o ratelimit.o
+	 proportions.o prio_heap.o ratelimit.o show_mem.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
diff --git a/lib/show_mem.c b/lib/show_mem.c
new file mode 100644
index 00000000000..238e72a18ce
--- /dev/null
+++ b/lib/show_mem.c
@@ -0,0 +1,63 @@
+/*
+ * Generic show_mem() implementation
+ *
+ * Copyright (C) 2008 Johannes Weiner <hannes@saeurebad.de>
+ * All code subject to the GPL version 2.
+ */
+
+#include <linux/mm.h>
+#include <linux/nmi.h>
+#include <linux/quicklist.h>
+
+void show_mem(void)
+{
+	pg_data_t *pgdat;
+	unsigned long total = 0, reserved = 0, shared = 0,
+		nonshared = 0, highmem = 0;
+
+	printk(KERN_INFO "Mem-Info:\n");
+	show_free_areas();
+
+	for_each_online_pgdat(pgdat) {
+		unsigned long i, flags;
+
+		pgdat_resize_lock(pgdat, &flags);
+		for (i = 0; i < pgdat->node_spanned_pages; i++) {
+			struct page *page;
+			unsigned long pfn = pgdat->node_start_pfn + i;
+
+			if (unlikely(!(i % MAX_ORDER_NR_PAGES)))
+				touch_nmi_watchdog();
+
+			if (!pfn_valid(pfn))
+				continue;
+
+			page = pfn_to_page(pfn);
+
+			if (PageHighMem(page))
+				highmem++;
+
+			if (PageReserved(page))
+				reserved++;
+			else if (page_count(page) == 1)
+				nonshared++;
+			else if (page_count(page) > 1)
+				shared += page_count(page) - 1;
+
+			total++;
+		}
+		pgdat_resize_unlock(pgdat, &flags);
+	}
+
+	printk(KERN_INFO "%lu pages RAM\n", total);
+#ifdef CONFIG_HIGHMEM
+	printk(KERN_INFO "%lu pages HighMem\n", highmem);
+#endif
+	printk(KERN_INFO "%lu pages reserved\n", reserved);
+	printk(KERN_INFO "%lu pages shared\n", shared);
+	printk(KERN_INFO "%lu pages non-shared\n", nonshared);
+#ifdef CONFIG_QUICKLIST
+	printk(KERN_INFO "%lu pages in pagetable cache\n",
+		quicklist_total_size());
+#endif
+}
-- 
cgit v1.2.3


From 5f834b9f3bd3769162fc169efd7ecae0712a2d1d Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:09 -0700
Subject: alpha: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- free swap pages, printed by show_swap_cache_info()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/mm/init.c | 30 ------------------------------
 arch/alpha/mm/numa.c | 35 -----------------------------------
 2 files changed, 65 deletions(-)

diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 40c15e7301d..234e42b8ee7 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -94,36 +94,6 @@ __bad_page(void)
 	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
 }
 
-#ifndef CONFIG_DISCONTIGMEM
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
-#endif
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index d8c4ceaf00b..a13de49d126 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -359,38 +359,3 @@ void __init mem_init(void)
 	mem_stress();
 #endif
 }
-
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-	int nid;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_node(nid) {
-		unsigned long flags;
-		pgdat_resize_lock(NODE_DATA(nid), &flags);
-		i = node_spanned_pages(nid);
-		while (i-- > 0) {
-			struct page *page = nid_page_nr(nid, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(NODE_DATA(nid), &flags);
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
-- 
cgit v1.2.3


From 46244a2b3c1dfd83041bcf0428c584d3a66b30cc Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:09 -0700
Subject: avr32: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in slabs, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/avr32/mm/init.c | 39 ---------------------------------------
 1 file changed, 39 deletions(-)

diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 3c85fdaa948..fa92ff6d95f 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -38,45 +38,6 @@ EXPORT_SYMBOL(empty_zero_page);
  */
 unsigned long mmu_context_cache = NO_CONTEXT;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, cached = 0;
-	int slab = 0, free = 0, shared = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		struct page *page, *end;
-
-		page = pgdat->node_mem_map;
-		end = page + pgdat->node_spanned_pages;
-
-		do {
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-			page++;
-		} while (page < end);
-	}
-
-	printk ("%d pages of RAM\n", total);
-	printk ("%d free pages\n", free);
-	printk ("%d reserved pages\n", reserved);
-	printk ("%d slab pages\n", slab);
-	printk ("%d pages shared\n", shared);
-	printk ("%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  *
-- 
cgit v1.2.3


From a2e9c44337b53aef37f3382920a478cac3777ba9 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:10 -0700
Subject: blackfin: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/blackfin/mm/init.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index ec3141fefd2..4d5326ee9a8 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -53,33 +53,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
-- 
cgit v1.2.3


From 47221222a59a565e11954c078a2cf6a07a7e690e Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:10 -0700
Subject: xtensa: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/xtensa/mm/init.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index ee261005b36..34163cfaaff 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -280,33 +280,6 @@ void free_initmem(void)
 	       (&__init_end - &__init_begin) >> 10);
 }
 
-void show_mem(void)
-{
-	int i, free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n",cached);
-	printk("%d free pages\n", free);
-}
-
 struct kmem_cache *pgtable_cache __read_mostly;
 
 static void pgd_ctor(void* addr)
-- 
cgit v1.2.3


From 8dad322f5449010c14990dd6934878f576b2ee60 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:11 -0700
Subject: x86: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- pages in swapcache, printed by show_swap_cache_info()
	- dirty pages, writeback pages, mapped pages, slab pages,
	  pagetable pages, printed by show_free_areas()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/init_64.c    | 37 -------------------------------------
 arch/x86/mm/pgtable_32.c | 47 -----------------------------------------------
 2 files changed, 84 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index ec37121f670..129618ca0ea 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -86,43 +86,6 @@ early_param("gbpages", parse_direct_gbpages_on);
  * around without checking the pgd every time.
  */
 
-void show_mem(void)
-{
-	long i, total = 0, reserved = 0;
-	long shared = 0, cached = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			/*
-			 * This loop can take a while with 256 GB and
-			 * 4k pages so defer the NMI watchdog:
-			 */
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-	}
-	printk(KERN_INFO "%lu pages of RAM\n",		total);
-	printk(KERN_INFO "%lu reserved pages\n",	reserved);
-	printk(KERN_INFO "%lu pages shared\n",		shared);
-	printk(KERN_INFO "%lu pages swap cached\n",	cached);
-}
-
 int after_bootmem;
 
 static __init void *spp_getpage(void)
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index b4becbf8c57..cab0abbd1eb 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -20,53 +20,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-	unsigned long flags;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-					global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-					global_page_state(NR_PAGETABLE));
-}
-
 /*
  * Associate a virtual page frame with a given physical page frame 
  * and protection flags for that frame.
-- 
cgit v1.2.3


From 79b0cbd113a9de1eaa3322528ccaeb97bd9189cc Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:12 -0700
Subject: um: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free swap pages, printed by show_swap_cache_info()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/kernel/mem.c | 31 -------------------------------
 1 file changed, 31 deletions(-)

diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index e2274ef3155..61d7e6138ff 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -264,37 +264,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void show_mem(void)
-{
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int high_mem = 0;
-	struct page *page;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages<<(PAGE_SHIFT-10));
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			high_mem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", high_mem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /* Allocate and free page tables. */
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
-- 
cgit v1.2.3


From 471a54239a1c8a09cd12733d4e28db2aeebedb59 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:12 -0700
Subject: sparc64: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free swap pages, printed by show_swap_cache_info()
	- pages in swapcache, printed by show_swap_cache_info()
	- dirty pages, writeback pages, mapped pages, slab pages,
	  pagetables pages, printed by show_free_areas()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sparc64/mm/init.c | 45 ---------------------------------------------
 1 file changed, 45 deletions(-)

diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 71329747395..4e821b3ecb0 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -392,51 +392,6 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end)
 	}
 }
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages << (PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long i, flags;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk(KERN_INFO "%lu pages of RAM\n", total);
-	printk(KERN_INFO "%lu reserved pages\n", reserved);
-	printk(KERN_INFO "%lu pages shared\n", shared);
-	printk(KERN_INFO "%lu pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n",
-	       global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-	       global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n",
-	       global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-	       global_page_state(NR_PAGETABLE));
-}
-
 void mmu_info(struct seq_file *m)
 {
 	if (tlb_type == cheetah)
-- 
cgit v1.2.3


From 03da6bfb5b40d454f5439ea905a68441aab23637 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:13 -0700
Subject: sh: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in slab, printed by show_free_areas()
	- free swap pages, printed by show_swap_cache_info()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sh/mm/init.c | 41 -----------------------------------------
 1 file changed, 41 deletions(-)

diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index d652d375eb1..b75a7acd62f 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -25,47 +25,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
 unsigned long cached_to_uncached = 0;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, free = 0;
-	int shared = 0, cached = 0, slab = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags, i;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	printk("%d pages of RAM\n", total);
-	printk("%d free pages\n", free);
-	printk("%d reserved pages\n", reserved);
-	printk("%d slab pages\n", slab);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-	printk(KERN_INFO "Total of %ld pages in page table cache\n",
-	       quicklist_total_size());
-}
-
 #ifdef CONFIG_MMU
 static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 {
-- 
cgit v1.2.3


From c55281dee09a843dd6bf5070324b86b84847e6ea Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:14 -0700
Subject: s390: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/s390/mm/init.c | 32 --------------------------------
 1 file changed, 32 deletions(-)

diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 388cc742005..4993b0f594e 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -42,38 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
 char  empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
-void show_mem(void)
-{
-	unsigned long i, total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long flags;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  */
-- 
cgit v1.2.3


From bda2fa535564ace56a395d5b65c6dc81305401fa Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:14 -0700
Subject: powerpc: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/mm/mem.c | 39 ---------------------------------------
 1 file changed, 39 deletions(-)

diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 1ca2235f096..702691cb9e8 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -186,45 +186,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
 }
 EXPORT_SYMBOL_GPL(walk_memory_resource);
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-#ifdef CONFIG_HIGHMEM
-	printk("%ld pages of HIGHMEM\n", highmem);
-#endif
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * Initialize the bootmem system and give it all the memory we
  * have available.  If we are using highmem, we only put the
-- 
cgit v1.2.3


From 4984d2d88805609e7702e8ee72b5e148c992ae7b Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:15 -0700
Subject: mn10300: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/mm/pgtable.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
index a477038752b..baffc581e03 100644
--- a/arch/mn10300/mm/pgtable.c
+++ b/arch/mn10300/mm/pgtable.c
@@ -27,33 +27,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * Associate a large virtual page frame with a given physical page frame
  * and protection flags for that frame. pfn is for the base of the page,
-- 
cgit v1.2.3


From 4bad9ea20146860d726ac14a53206da6be132b98 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:16 -0700
Subject: h8300: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/h8300/mm/init.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index e4f4199f97a..a1d228f5e4e 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -64,33 +64,6 @@ unsigned long empty_zero_page;
 
 extern unsigned long rom_length;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk("\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk("%d pages of RAM\n",total);
-    printk("%d free pages\n",free);
-    printk("%d reserved pages\n",reserved);
-    printk("%d pages shared\n",shared);
-    printk("%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
-- 
cgit v1.2.3


From e66ddf1a4593d9bec8623782b94d7b50cc58cec5 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:16 -0700
Subject: mips: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

And show_mem() does now actually print something on configurations
with multiple nodes.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mips/mm/Makefile  |  3 +--
 arch/mips/mm/pgtable.c | 36 ------------------------------------
 2 files changed, 1 insertion(+), 38 deletions(-)
 delete mode 100644 arch/mips/mm/pgtable.c

diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 48731020ca0..44e8dd8106b 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,8 +3,7 @@
 #
 
 obj-y				+= cache.o dma-default.o extable.o fault.o \
-				   init.o pgtable.o tlbex.o tlbex-fault.o \
-				   uasm.o page.o
+				   init.o tlbex.o tlbex-fault.o uasm.o page.o
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c
deleted file mode 100644
index 7dfa579ab24..00000000000
--- a/arch/mips/mm/pgtable.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-
-void show_mem(void)
-{
-#ifndef CONFIG_NEED_MULTIPLE_NODES  /* XXX(hch): later.. */
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		if (!pfn_valid(pfn))
-			continue;
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			highmem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n", highmem);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-#endif
-}
-- 
cgit v1.2.3


From 0ec5e0edd155385cb59cb9857de3176524ba4ff8 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:17 -0700
Subject: m68knommu: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68knommu/mm/init.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index 22e2a0d02b8..3bf249c53e4 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -62,33 +62,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
-- 
cgit v1.2.3


From 969eefb516b71f8abadf5bc4861a672694f48c38 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:18 -0700
Subject: m68k: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68k/mm/init.c | 30 ------------------------------
 1 file changed, 30 deletions(-)

diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index 79f5f94d480..81bb08ceec1 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -69,36 +69,6 @@ void __init m68k_setup_node(int node)
 void *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
 
-void show_mem(void)
-{
-	pg_data_t *pgdat;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-	int cached = 0;
-	int i;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat->node_mem_map + i;
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 extern void init_pointer_table(unsigned long ptable);
 
 /* References to section boundaries */
-- 
cgit v1.2.3


From aca532016f49eca0341ed7be5885d6c63ca69e63 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:18 -0700
Subject: m32r: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free swap pages, printed by show_swap_cache_info()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/mm/init.c | 36 ------------------------------------
 1 file changed, 36 deletions(-)

diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index 2554eb59cfe..24d429f9358 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -36,42 +36,6 @@ pgd_t swapper_pg_dir[1024];
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n",highmem);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 /*
  * Cache of MMU context last used.
  */
-- 
cgit v1.2.3


From e275e0a687e83add62b10e6d36b67f0964455469 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:19 -0700
Subject: frv: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()

where show_mem() calls show_free_areas().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/mm/init.c | 31 -------------------------------
 1 file changed, 31 deletions(-)

diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 9af7740f32f..1b851db3418 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -61,37 +61,6 @@ static unsigned long empty_bad_page;
 unsigned long empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
 
-/*****************************************************************************/
-/*
- *
- */
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		struct page *page = &mem_map[i];
-
-		total++;
-		if (PageReserved(page))
-			reserved++;
-		else if (!page_count(page))
-			free++;
-		else
-			shared += page_count(page) - 1;
-	}
-
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-
-} /* end show_mem() */
-
 /*****************************************************************************/
 /*
  * paging_init() continues the virtual memory environment setup which
-- 
cgit v1.2.3


From a4074d93dd4e8f46f727840baa2be02d544fd17f Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Fri, 25 Jul 2008 19:46:20 -0700
Subject: cris: use generic show_mem()

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/cris/mm/init.c | 30 ------------------------------
 1 file changed, 30 deletions(-)

diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index 5b06ffa15e3..2fdd212eb25 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -19,36 +19,6 @@ unsigned long empty_zero_page;
 extern char _stext, _edata, _etext; /* From linkerscript */
 extern char __init_begin, __init_end;
 
-void 
-show_mem(void)
-{
-	int i,free = 0,total = 0,cached = 0, reserved = 0, nonshared = 0;
-	int shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else if (page_count(mem_map+i) == 1)
-			nonshared++;
-		else
-			shared += page_count(mem_map+i) - 1;
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages nonshared\n",nonshared);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 void __init
 mem_init(void)
 {
-- 
cgit v1.2.3


From 0e1451da4f928ae1c9d5ca617faebde9f02985db Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:20 -0700
Subject: drm: make drm_minors_cleanup() static

Make the needlessly global drm_minors_cleanup() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/gpu/drm/drm_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 564138714bb..452c2d866ec 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -318,7 +318,7 @@ static void drm_cleanup(struct drm_device * dev)
 		DRM_ERROR("Cannot unload module\n");
 }
 
-int drm_minors_cleanup(int id, void *ptr, void *data)
+static int drm_minors_cleanup(int id, void *ptr, void *data)
 {
 	struct drm_minor *minor = ptr;
 	struct drm_device *dev;
-- 
cgit v1.2.3


From 96930a6365c99c160138a395566e360b27348b8f Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:21 -0700
Subject: make cgroup_seqfile_release() static

cgroup_seqfile_release() can become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/cgroup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 66ec9fd21e0..89bd6fb7894 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1529,7 +1529,7 @@ static int cgroup_seqfile_show(struct seq_file *m, void *arg)
 	return cft->read_seq_string(state->cgroup, cft, m);
 }
 
-int cgroup_seqfile_release(struct inode *inode, struct file *file)
+static int cgroup_seqfile_release(struct inode *inode, struct file *file)
 {
 	struct seq_file *seq = file->private_data;
 	kfree(seq->private);
-- 
cgit v1.2.3


From 25cdcd0086d97a011fcd0c1ff572e30da24790ec Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:21 -0700
Subject: make pnp_add_card_id() static

pnp_add_card_id() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pnp/base.h | 1 -
 drivers/pnp/card.c | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index e3fa9a2d9a3..9fd7bb9b7dc 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -19,7 +19,6 @@ struct pnp_id *pnp_add_id(struct pnp_dev *dev, char *id);
 int pnp_interface_attach_device(struct pnp_dev *dev);
 
 int pnp_add_card(struct pnp_card *card);
-struct pnp_id *pnp_add_card_id(struct pnp_card *card, char *id);
 void pnp_remove_card(struct pnp_card *card);
 int pnp_add_card_device(struct pnp_card *card, struct pnp_dev *dev);
 void pnp_remove_card_device(struct pnp_dev *dev);
diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index b00ef1030e4..e75b060daa9 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -102,7 +102,7 @@ static int card_probe(struct pnp_card *card, struct pnp_card_driver *drv)
  * @id: pointer to a pnp_id structure
  * @card: pointer to the desired card
  */
-struct pnp_id *pnp_add_card_id(struct pnp_card *card, char *id)
+static struct pnp_id *pnp_add_card_id(struct pnp_card *card, char *id)
 {
 	struct pnp_id *dev_id, *ptr;
 
-- 
cgit v1.2.3


From 23d5f96ce6571da51c0f6bfa7361e5f91f314b2b Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:22 -0700
Subject: make parport_cs_release() static

This patch makes the needlessly global parport_cs_release() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/parport/parport_cs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 802a81d4736..00e1d9620f7 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -235,7 +235,7 @@ failed:
     
 ======================================================================*/
 
-void parport_cs_release(struct pcmcia_device *link)
+static void parport_cs_release(struct pcmcia_device *link)
 {
 	parport_info_t *info = link->priv;
 
-- 
cgit v1.2.3


From 9e5c6da71e89fa25ced6e88182225a99941bec90 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:22 -0700
Subject: make mm/sparse.c: make a function static

This patch makes the needlessly global sparse_early_mem_map_alloc()
static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/sparse.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/sparse.c b/mm/sparse.c
index 8ffc0899000..5d9dbbb9d39 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -377,7 +377,7 @@ struct page __init *sparse_mem_map_populate(unsigned long pnum, int nid)
 }
 #endif /* !CONFIG_SPARSEMEM_VMEMMAP */
 
-struct page __init *sparse_early_mem_map_alloc(unsigned long pnum)
+static struct page __init *sparse_early_mem_map_alloc(unsigned long pnum)
 {
 	struct page *map;
 	struct mem_section *ms = __nr_to_section(pnum);
-- 
cgit v1.2.3


From 9d8fddfb17aaee4ffc5e3d0560620d0fa8b50a42 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:23 -0700
Subject: mm/allocpercpu.c: make 4 functions static

This patch makes the following needlessly global functions static:
 - percpu_depopulate()
 - __percpu_depopulate_mask()
 - percpu_populate()
 - __percpu_populate_mask()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/percpu.h | 29 -----------------------------
 mm/allocpercpu.c       | 20 +++++++++++---------
 2 files changed, 11 insertions(+), 38 deletions(-)

diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 4cdd393e71e..fac3337547e 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -74,11 +74,6 @@ struct percpu_data {
         (__typeof__(ptr))__p->ptrs[(cpu)];	          \
 })
 
-extern void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu);
-extern void percpu_depopulate(void *__pdata, int cpu);
-extern int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
-				  cpumask_t *mask);
-extern void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask);
 extern void *__percpu_alloc_mask(size_t size, gfp_t gfp, cpumask_t *mask);
 extern void percpu_free(void *__pdata);
 
@@ -86,26 +81,6 @@ extern void percpu_free(void *__pdata);
 
 #define percpu_ptr(ptr, cpu) ({ (void)(cpu); (ptr); })
 
-static inline void percpu_depopulate(void *__pdata, int cpu)
-{
-}
-
-static inline void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask)
-{
-}
-
-static inline void *percpu_populate(void *__pdata, size_t size, gfp_t gfp,
-				    int cpu)
-{
-	return percpu_ptr(__pdata, cpu);
-}
-
-static inline int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
-					 cpumask_t *mask)
-{
-	return 0;
-}
-
 static __always_inline void *__percpu_alloc_mask(size_t size, gfp_t gfp, cpumask_t *mask)
 {
 	return kzalloc(size, gfp);
@@ -118,10 +93,6 @@ static inline void percpu_free(void *__pdata)
 
 #endif /* CONFIG_SMP */
 
-#define percpu_populate_mask(__pdata, size, gfp, mask) \
-	__percpu_populate_mask((__pdata), (size), (gfp), &(mask))
-#define percpu_depopulate_mask(__pdata, mask) \
-	__percpu_depopulate_mask((__pdata), &(mask))
 #define percpu_alloc_mask(size, gfp, mask) \
 	__percpu_alloc_mask((size), (gfp), &(mask))
 
diff --git a/mm/allocpercpu.c b/mm/allocpercpu.c
index 843364594e2..4297bc41bfd 100644
--- a/mm/allocpercpu.c
+++ b/mm/allocpercpu.c
@@ -18,27 +18,28 @@
  * Depopulating per-cpu data for a cpu going offline would be a typical
  * use case. You need to register a cpu hotplug handler for that purpose.
  */
-void percpu_depopulate(void *__pdata, int cpu)
+static void percpu_depopulate(void *__pdata, int cpu)
 {
 	struct percpu_data *pdata = __percpu_disguise(__pdata);
 
 	kfree(pdata->ptrs[cpu]);
 	pdata->ptrs[cpu] = NULL;
 }
-EXPORT_SYMBOL_GPL(percpu_depopulate);
 
 /**
  * percpu_depopulate_mask - depopulate per-cpu data for some cpu's
  * @__pdata: per-cpu data to depopulate
  * @mask: depopulate per-cpu data for cpu's selected through mask bits
  */
-void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask)
+static void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask)
 {
 	int cpu;
 	for_each_cpu_mask_nr(cpu, *mask)
 		percpu_depopulate(__pdata, cpu);
 }
-EXPORT_SYMBOL_GPL(__percpu_depopulate_mask);
+
+#define percpu_depopulate_mask(__pdata, mask) \
+	__percpu_depopulate_mask((__pdata), &(mask))
 
 /**
  * percpu_populate - populate per-cpu data for given cpu
@@ -51,7 +52,7 @@ EXPORT_SYMBOL_GPL(__percpu_depopulate_mask);
  * use case. You need to register a cpu hotplug handler for that purpose.
  * Per-cpu object is populated with zeroed buffer.
  */
-void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu)
+static void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu)
 {
 	struct percpu_data *pdata = __percpu_disguise(__pdata);
 	int node = cpu_to_node(cpu);
@@ -68,7 +69,6 @@ void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu)
 		pdata->ptrs[cpu] = kzalloc(size, gfp);
 	return pdata->ptrs[cpu];
 }
-EXPORT_SYMBOL_GPL(percpu_populate);
 
 /**
  * percpu_populate_mask - populate per-cpu data for more cpu's
@@ -79,8 +79,8 @@ EXPORT_SYMBOL_GPL(percpu_populate);
  *
  * Per-cpu objects are populated with zeroed buffers.
  */
-int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
-			   cpumask_t *mask)
+static int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
+				  cpumask_t *mask)
 {
 	cpumask_t populated;
 	int cpu;
@@ -94,7 +94,9 @@ int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
 			cpu_set(cpu, populated);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(__percpu_populate_mask);
+
+#define percpu_populate_mask(__pdata, size, gfp, mask) \
+	__percpu_populate_mask((__pdata), (size), (gfp), &(mask))
 
 /**
  * percpu_alloc_mask - initial setup of per-cpu data
-- 
cgit v1.2.3


From 15f59adae001766a2c7f7fe4f196387bb04bcff5 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:23 -0700
Subject: make mm/memory.c:print_bad_pte() static

This patch makes the needlessly global print_bad_pte() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/mm.h | 1 -
 mm/memory.c        | 3 ++-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/mm.h b/include/linux/mm.h
index f3fd70d6029..6e695eaab4c 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -810,7 +810,6 @@ extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *
 
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, unsigned long start,
 		int len, int write, int force, struct page **pages, struct vm_area_struct **vmas);
-void print_bad_pte(struct vm_area_struct *, pte_t, unsigned long);
 
 extern int try_to_release_page(struct page * page, gfp_t gfp_mask);
 extern void do_invalidatepage(struct page *page, unsigned long offset);
diff --git a/mm/memory.c b/mm/memory.c
index 262e3eb6601..a8ca04faaea 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -374,7 +374,8 @@ static inline void add_mm_rss(struct mm_struct *mm, int file_rss, int anon_rss)
  *
  * The calling function must still handle the error.
  */
-void print_bad_pte(struct vm_area_struct *vma, pte_t pte, unsigned long vaddr)
+static void print_bad_pte(struct vm_area_struct *vma, pte_t pte,
+			  unsigned long vaddr)
 {
 	printk(KERN_ERR "Bad pte = %08llx, process = %s, "
 			"vm_flags = %lx, vaddr = %lx\n",
-- 
cgit v1.2.3


From 7c363b8c6536f26934172d3c46f0bbec01a97c61 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:24 -0700
Subject: mm/swapfile.c: make code static

This patch makes the following needlessly global code static:
 - swap_lock
 - nr_swapfiles
 - struct swap_list

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/swap.h | 3 ---
 mm/swapfile.c        | 6 +++---
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/include/linux/swap.h b/include/linux/swap.h
index 0b3377650c8..de40f169a4e 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -237,7 +237,6 @@ extern struct page *swapin_readahead(swp_entry_t, gfp_t,
 
 /* linux/mm/swapfile.c */
 extern long total_swap_pages;
-extern unsigned int nr_swapfiles;
 extern void si_swapinfo(struct sysinfo *);
 extern swp_entry_t get_swap_page(void);
 extern swp_entry_t get_swap_page_of_type(int);
@@ -254,8 +253,6 @@ extern int can_share_swap_page(struct page *);
 extern int remove_exclusive_swap_page(struct page *);
 struct backing_dev_info;
 
-extern spinlock_t swap_lock;
-
 /* linux/mm/thrash.c */
 extern struct mm_struct * swap_token_mm;
 extern void grab_swap_token(void);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index af283933c14..6beb6251e99 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -33,8 +33,8 @@
 #include <asm/tlbflush.h>
 #include <linux/swapops.h>
 
-DEFINE_SPINLOCK(swap_lock);
-unsigned int nr_swapfiles;
+static DEFINE_SPINLOCK(swap_lock);
+static unsigned int nr_swapfiles;
 long total_swap_pages;
 static int swap_overflow;
 static int least_priority;
@@ -44,7 +44,7 @@ static const char Unused_file[] = "Unused swap file entry ";
 static const char Bad_offset[] = "Bad swap offset entry ";
 static const char Unused_offset[] = "Unused swap offset entry ";
 
-struct swap_list_t swap_list = {-1, -1};
+static struct swap_list_t swap_list = {-1, -1};
 
 static struct swap_info_struct swap_info[MAX_SWAPFILES];
 
-- 
cgit v1.2.3


From 9580d85f9cdb076c4bfb467bc6c0d3c5e499957a Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:25 -0700
Subject: drivers/char/rtc.c: make 2 functions static

The following functions can now become static:
 - rtc_interrupt()
 - rtc_get_rtc_time()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Bernhard Walle <bwalle@suse.de>
Acked-by: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/rtc.c  | 5 +++--
 include/linux/rtc.h | 2 --
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index dbefbb30ed4..d9799e2bcfb 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -144,6 +144,7 @@ static ssize_t rtc_read(struct file *file, char __user *buf,
 			size_t count, loff_t *ppos);
 
 static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+static void rtc_get_rtc_time(struct rtc_time *rtc_tm);
 
 #ifdef RTC_IRQ
 static unsigned int rtc_poll(struct file *file, poll_table *wait);
@@ -235,7 +236,7 @@ static inline unsigned char rtc_is_updating(void)
  *	(See ./arch/XXXX/kernel/time.c for the set_rtc_mmss() function.)
  */
 
-irqreturn_t rtc_interrupt(int irq, void *dev_id)
+static irqreturn_t rtc_interrupt(int irq, void *dev_id)
 {
 	/*
 	 *	Can be an alarm interrupt, update complete interrupt,
@@ -1303,7 +1304,7 @@ static int rtc_proc_open(struct inode *inode, struct file *file)
 }
 #endif
 
-void rtc_get_rtc_time(struct rtc_time *rtc_tm)
+static void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 {
 	unsigned long uip_watchdog = jiffies, flags;
 	unsigned char ctrl;
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index b01fe004cb5..91f597ad6ac 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -225,8 +225,6 @@ typedef struct rtc_task {
 int rtc_register(rtc_task_t *task);
 int rtc_unregister(rtc_task_t *task);
 int rtc_control(rtc_task_t *t, unsigned int cmd, unsigned long arg);
-void rtc_get_rtc_time(struct rtc_time *rtc_tm);
-irqreturn_t rtc_interrupt(int irq, void *dev_id);
 
 #endif /* __KERNEL__ */
 
-- 
cgit v1.2.3


From f56f6d30c75984d0aba2656eaeb35f3806395191 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:25 -0700
Subject: make init/do_mounts.c:root_device_name static

This patch makes the needlessly global root_device_name static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/do_mounts.c | 2 +-
 init/do_mounts.h | 1 -
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/init/do_mounts.c b/init/do_mounts.c
index f769fac4f4c..3715feb8446 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -23,7 +23,7 @@
 int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */
 
 int root_mountflags = MS_RDONLY | MS_SILENT;
-char * __initdata root_device_name;
+static char * __initdata root_device_name;
 static char __initdata saved_root_name[64];
 static int __initdata root_wait;
 
diff --git a/init/do_mounts.h b/init/do_mounts.h
index 735705d137f..9aa968d5432 100644
--- a/init/do_mounts.h
+++ b/init/do_mounts.h
@@ -11,7 +11,6 @@ void  change_floppy(char *fmt, ...);
 void  mount_block_root(char *name, int flags);
 void  mount_root(void);
 extern int root_mountflags;
-extern char *root_device_name;
 
 static inline int create_dev(char *name, dev_t dev)
 {
-- 
cgit v1.2.3


From 511e7483abe1ab433d8ab7a7998f799042b52941 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:26 -0700
Subject: make macfb_setup() static

This patch makes the needlessly global macfb_setup() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/macfb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c
index aa8c714d624..b790ddff76f 100644
--- a/drivers/video/macfb.c
+++ b/drivers/video/macfb.c
@@ -596,7 +596,7 @@ static struct fb_ops macfb_ops = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-void __init macfb_setup(char *options)
+static void __init macfb_setup(char *options)
 {
 	char *this_opt;
 	
-- 
cgit v1.2.3


From 3d1e412ac5570a669e1b1fc5fd0f6859250c3d76 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:26 -0700
Subject: video/console/stico{n,re}.c: make code static

This patch makes the following needlessly global code static:
 - sticon.c: sticonsole_init()
 - sticore.c: struct default_sti
 - sticore.c: sti_init_graph()
 - sticore.c: sti_inq_conf()
 - sticore.c: sti_rom_copy()
 - sticore.c: sti_select_fbfont()
 - sticore.c: sti_select_font()
 - sticore.c: sti_get_wmode_rom()
 - sticore.c: sti_read_rom()

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/console/sticon.c  |  2 +-
 drivers/video/console/sticore.c | 33 +++++++++++++++------------------
 drivers/video/sticore.h         |  2 --
 3 files changed, 16 insertions(+), 21 deletions(-)

diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index a11cc2fdd4c..4055dbdd1b4 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -370,7 +370,7 @@ static const struct consw sti_con = {
 
 
 
-int __init sticonsole_init(void)
+static int __init sticonsole_init(void)
 {
     /* already initialized ? */
     if (sticon_sti)
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index e9ab657f0bb..d7822af0e00 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -29,7 +29,7 @@
 
 #define STI_DRIVERVERSION "Version 0.9a"
 
-struct sti_struct *default_sti __read_mostly;
+static struct sti_struct *default_sti __read_mostly;
 
 /* number of STI ROMS found and their ptrs to each struct */
 static int num_sti_roms __read_mostly;
@@ -68,8 +68,7 @@ static const struct sti_init_flags default_init_flags = {
 	.init_cmap_tx = 1,
 };
 
-int
-sti_init_graph(struct sti_struct *sti) 
+static int sti_init_graph(struct sti_struct *sti)
 {
 	struct sti_init_inptr_ext inptr_ext = { 0, };
 	struct sti_init_inptr inptr = {
@@ -100,8 +99,7 @@ static const struct sti_conf_flags default_conf_flags = {
 	.wait	= STI_WAIT,
 };
 
-void
-sti_inq_conf(struct sti_struct *sti)
+static void sti_inq_conf(struct sti_struct *sti)
 {
 	struct sti_conf_inptr inptr = { 0, };
 	unsigned long flags;
@@ -237,8 +235,8 @@ static void sti_flush(unsigned long start, unsigned long end)
 	flush_icache_range(start, end);
 }
 
-void __devinit
-sti_rom_copy(unsigned long base, unsigned long count, void *dest)
+static void __devinit sti_rom_copy(unsigned long base, unsigned long count,
+				   void *dest)
 {
 	unsigned long dest_start = (unsigned long) dest;
 
@@ -478,8 +476,8 @@ sti_init_glob_cfg(struct sti_struct *sti,
 }
 
 #ifdef CONFIG_FB
-struct sti_cooked_font * __devinit
-sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
+static struct sti_cooked_font __devinit
+*sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 {
 	const struct font_desc *fbfont;
 	unsigned int size, bpc;
@@ -534,16 +532,16 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 	return cooked_font;
 }
 #else
-struct sti_cooked_font * __devinit
-sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
+static struct sti_cooked_font __devinit
+*sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 {
 	return NULL;
 }
 #endif
 
-struct sti_cooked_font * __devinit
-sti_select_font(struct sti_cooked_rom *rom,
-	    int (*search_font_fnc) (struct sti_cooked_rom *,int,int) )
+static struct sti_cooked_font __devinit
+*sti_select_font(struct sti_cooked_rom *rom,
+		 int (*search_font_fnc)(struct sti_cooked_rom *, int, int))
 {
 	struct sti_cooked_font *font;
 	int i;
@@ -707,8 +705,7 @@ sti_get_bmode_rom (unsigned long address)
 	return raw;
 }
 
-struct sti_rom * __devinit
-sti_get_wmode_rom (unsigned long address)
+static struct sti_rom __devinit *sti_get_wmode_rom(unsigned long address)
 {
 	struct sti_rom *raw;
 	unsigned long size;
@@ -723,8 +720,8 @@ sti_get_wmode_rom (unsigned long address)
 	return raw;
 }
 
-int __devinit
-sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address)
+static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti,
+				  unsigned long address)
 {
 	struct sti_cooked_rom *cooked;
 	struct sti_rom *raw = NULL;
diff --git a/drivers/video/sticore.h b/drivers/video/sticore.h
index 1a9a60c74be..7fe5be4bc70 100644
--- a/drivers/video/sticore.h
+++ b/drivers/video/sticore.h
@@ -352,8 +352,6 @@ struct sti_struct *sti_get_rom(unsigned int index); /* 0: default sti */
 
 /* functions to call the STI ROM directly */
 
-int  sti_init_graph(struct sti_struct *sti);
-void sti_inq_conf(struct sti_struct *sti);
 void sti_putc(struct sti_struct *sti, int c, int y, int x);
 void sti_set(struct sti_struct *sti, int src_y, int src_x,
 	     int height, int width, u8 color);
-- 
cgit v1.2.3


From 6ca813c4e515d9b868cd71703ef15f4af3aebb21 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 25 Jul 2008 19:46:27 -0700
Subject: video/stifb.c: make 2 functions static

This patch makes the following needlessly global functions static:
 - stifb_init_fb()
 - stifb_init()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/stifb.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index 598d35eff93..16648140241 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1078,8 +1078,7 @@ static struct fb_ops stifb_ops = {
  *  Initialization
  */
 
-int __init
-stifb_init_fb(struct sti_struct *sti, int bpp_pref)
+static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
 {
 	struct fb_fix_screeninfo *fix;
 	struct fb_var_screeninfo *var;
@@ -1315,8 +1314,7 @@ static int stifb_disabled __initdata;
 int __init
 stifb_setup(char *options);
 
-int __init
-stifb_init(void)
+static int __init stifb_init(void)
 {
 	struct sti_struct *sti;
 	struct sti_struct *def_sti;
-- 
cgit v1.2.3


From bbfb21daa320c9eb327d63734f295fa50ba93826 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:46 -0700
Subject: [SCSI] qla2xxx: Correct locking during NVRAM manipulation.

Commit 2c96d8d0c17978bbf5eb82314d488f46d4a51280 pushed the
acquisition of hardware_lock to too fine a level, which in turn
will cause problems with cond_resched()s added with
40a2e34a94c336b716f631b2952d233e1ba76e3c.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_sup.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 1728ab3ccb2..ebea62246c8 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -869,11 +869,9 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 	uint32_t i;
 	uint32_t *dwptr;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
-	unsigned long flags;
 
 	ret = QLA_SUCCESS;
 
-	spin_lock_irqsave(&ha->hardware_lock, flags);
 	/* Enable flash write. */
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
@@ -907,7 +905,6 @@ qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 	RD_REG_DWORD(&reg->ctrl_status);	/* PCI Posting. */
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	return ret;
 }
-- 
cgit v1.2.3


From 5f3a9a207f1fccde476dd31b4c63ead2967d934f Mon Sep 17 00:00:00 2001
From: Seokmann Ju <seokmann.ju@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:47 -0700
Subject: [SCSI] qla2xxx: Add dev_loss_tmo_callbk/terminate_rport_io callback
 support.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_attr.c | 31 ++++++++++++++++++++++++
 drivers/scsi/qla2xxx/qla_def.h  |  1 -
 drivers/scsi/qla2xxx/qla_gbl.h  |  2 ++
 drivers/scsi/qla2xxx/qla_init.c | 16 ++++---------
 drivers/scsi/qla2xxx/qla_os.c   | 53 +++++++++++++++++++++++++++++++----------
 5 files changed, 78 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 8dd88fc1244..3112518b0e6 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -994,6 +994,33 @@ qla2x00_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
 	rport->dev_loss_tmo = ha->port_down_retry_count + 5;
 }
 
+static void
+qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
+{
+	struct Scsi_Host *host = rport_to_shost(rport);
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+
+	qla2x00_abort_fcport_cmds(fcport);
+
+	/*
+	 * Transport has effectively 'deleted' the rport, clear
+	 * all local references.
+	 */
+	spin_lock_irq(host->host_lock);
+	fcport->rport = NULL;
+	*((fc_port_t **)rport->dd_data) = NULL;
+	spin_unlock_irq(host->host_lock);
+}
+
+static void
+qla2x00_terminate_rport_io(struct fc_rport *rport)
+{
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+
+	qla2x00_abort_fcport_cmds(fcport);
+	scsi_target_unblock(&rport->dev);
+}
+
 static int
 qla2x00_issue_lip(struct Scsi_Host *shost)
 {
@@ -1253,6 +1280,8 @@ struct fc_function_template qla2xxx_transport_functions = {
 	.show_rport_dev_loss_tmo = 1,
 
 	.issue_fc_host_lip = qla2x00_issue_lip,
+	.dev_loss_tmo_callbk = qla2x00_dev_loss_tmo_callbk,
+	.terminate_rport_io = qla2x00_terminate_rport_io,
 	.get_fc_host_stats = qla2x00_get_fc_host_stats,
 
 	.vport_create = qla24xx_vport_create,
@@ -1296,6 +1325,8 @@ struct fc_function_template qla2xxx_transport_vport_functions = {
 	.show_rport_dev_loss_tmo = 1,
 
 	.issue_fc_host_lip = qla2x00_issue_lip,
+	.dev_loss_tmo_callbk = qla2x00_dev_loss_tmo_callbk,
+	.terminate_rport_io = qla2x00_terminate_rport_io,
 	.get_fc_host_stats = qla2x00_get_fc_host_stats,
 };
 
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 8dd600013bd..7b0ddc83413 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1544,7 +1544,6 @@ typedef struct fc_port {
 	int login_retry;
 	atomic_t port_down_timer;
 
-	spinlock_t rport_lock;
 	struct fc_rport *rport, *drport;
 	u32 supported_classes;
 
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 9b4bebee687..5a50fb74972 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -71,6 +71,8 @@ extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum
 extern int qla2x00_post_hwe_work(struct scsi_qla_host *, uint16_t , uint16_t,
     uint16_t, uint16_t);
 
+extern void qla2x00_abort_fcport_cmds(fc_port_t *);
+
 /*
  * Global Functions in qla_mid.c source file.
  */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bbbc5a632a1..c7388fadf22 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1864,12 +1864,11 @@ qla2x00_rport_del(void *data)
 {
 	fc_port_t *fcport = data;
 	struct fc_rport *rport;
-	unsigned long flags;
 
-	spin_lock_irqsave(&fcport->rport_lock, flags);
+	spin_lock_irq(fcport->ha->host->host_lock);
 	rport = fcport->drport;
 	fcport->drport = NULL;
-	spin_unlock_irqrestore(&fcport->rport_lock, flags);
+	spin_unlock_irq(fcport->ha->host->host_lock);
 	if (rport)
 		fc_remote_port_delete(rport);
 }
@@ -1898,7 +1897,6 @@ qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags)
 	atomic_set(&fcport->state, FCS_UNCONFIGURED);
 	fcport->flags = FCF_RLC_SUPPORT;
 	fcport->supported_classes = FC_COS_UNSPECIFIED;
-	spin_lock_init(&fcport->rport_lock);
 
 	return fcport;
 }
@@ -2243,28 +2241,24 @@ qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport)
 {
 	struct fc_rport_identifiers rport_ids;
 	struct fc_rport *rport;
-	unsigned long flags;
 
 	if (fcport->drport)
 		qla2x00_rport_del(fcport);
-	if (fcport->rport)
-		return;
 
 	rport_ids.node_name = wwn_to_u64(fcport->node_name);
 	rport_ids.port_name = wwn_to_u64(fcport->port_name);
 	rport_ids.port_id = fcport->d_id.b.domain << 16 |
 	    fcport->d_id.b.area << 8 | fcport->d_id.b.al_pa;
 	rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
-	rport = fc_remote_port_add(ha->host, 0, &rport_ids);
+	fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids);
 	if (!rport) {
 		qla_printk(KERN_WARNING, ha,
 		    "Unable to allocate fc remote port!\n");
 		return;
 	}
-	spin_lock_irqsave(&fcport->rport_lock, flags);
-	fcport->rport = rport;
+	spin_lock_irq(fcport->ha->host->host_lock);
 	*((fc_port_t **)rport->dd_data) = fcport;
-	spin_unlock_irqrestore(&fcport->rport_lock, flags);
+	spin_unlock_irq(fcport->ha->host->host_lock);
 
 	rport->supported_classes = fcport->supported_classes;
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 48eaa3bb543..c5ad858e17e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -388,7 +388,7 @@ qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	}
 
 	/* Close window on fcport/rport state-transitioning. */
-	if (!*(fc_port_t **)rport->dd_data) {
+	if (fcport->drport) {
 		cmd->result = DID_IMM_RETRY << 16;
 		goto qc_fail_command;
 	}
@@ -455,7 +455,7 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	}
 
 	/* Close window on fcport/rport state-transitioning. */
-	if (!*(fc_port_t **)rport->dd_data) {
+	if (fcport->drport) {
 		cmd->result = DID_IMM_RETRY << 16;
 		goto qc24_fail_command;
 	}
@@ -617,6 +617,40 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
 	return (return_status);
 }
 
+void
+qla2x00_abort_fcport_cmds(fc_port_t *fcport)
+{
+	int cnt;
+	unsigned long flags;
+	srb_t *sp;
+	scsi_qla_host_t *ha = fcport->ha;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
+
+	spin_lock_irqsave(&pha->hardware_lock, flags);
+	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+		sp = pha->outstanding_cmds[cnt];
+		if (!sp)
+			continue;
+		if (sp->fcport != fcport)
+			continue;
+
+		spin_unlock_irqrestore(&pha->hardware_lock, flags);
+		if (ha->isp_ops->abort_command(ha, sp)) {
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			    "Abort failed --  %lx\n", sp->cmd->serial_number));
+		} else {
+			if (qla2x00_eh_wait_on_command(ha, sp->cmd) !=
+			    QLA_SUCCESS)
+				DEBUG2(qla_printk(KERN_WARNING, ha,
+				    "Abort failed while waiting --  %lx\n",
+				    sp->cmd->serial_number));
+
+		}
+		spin_lock_irqsave(&pha->hardware_lock, flags);
+	}
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
+}
+
 static void
 qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
 {
@@ -1813,7 +1847,6 @@ static inline void
 qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
     int defer)
 {
-	unsigned long flags;
 	struct fc_rport *rport;
 
 	if (!fcport->rport)
@@ -1821,19 +1854,13 @@ qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
 
 	rport = fcport->rport;
 	if (defer) {
-		spin_lock_irqsave(&fcport->rport_lock, flags);
+		spin_lock_irq(ha->host->host_lock);
 		fcport->drport = rport;
-		fcport->rport = NULL;
-		*(fc_port_t **)rport->dd_data = NULL;
-		spin_unlock_irqrestore(&fcport->rport_lock, flags);
+		spin_unlock_irq(ha->host->host_lock);
 		set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
-	} else {
-		spin_lock_irqsave(&fcport->rport_lock, flags);
-		fcport->rport = NULL;
-		*(fc_port_t **)rport->dd_data = NULL;
-		spin_unlock_irqrestore(&fcport->rport_lock, flags);
+		qla2xxx_wake_dpc(ha);
+	} else
 		fc_remote_port_delete(rport);
-	}
 }
 
 /*
-- 
cgit v1.2.3


From 85821c906cf3563a00a3d98fa380a2581a7a5ff1 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:48 -0700
Subject: [SCSI] qla2xxx: Set an rport's dev_loss_tmo value in a consistent
 manner.

As there's no point in adding a fixed-fudge value (originally 5
seconds), honor the user settings only.  We also remove the
driver's dead-callback get_rport_dev_loss_tmo function
(qla2x00_get_rport_loss_tmo()).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_attr.c | 20 ++------------------
 drivers/scsi/qla2xxx/qla_os.c   |  2 +-
 2 files changed, 3 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 3112518b0e6..8728e873996 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -971,27 +971,13 @@ qla2x00_get_starget_port_id(struct scsi_target *starget)
 	fc_starget_port_id(starget) = port_id;
 }
 
-static void
-qla2x00_get_rport_loss_tmo(struct fc_rport *rport)
-{
-	struct Scsi_Host *host = rport_to_shost(rport);
-	scsi_qla_host_t *ha = shost_priv(host);
-
-	rport->dev_loss_tmo = ha->port_down_retry_count + 5;
-}
-
 static void
 qla2x00_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
 {
-	struct Scsi_Host *host = rport_to_shost(rport);
-	scsi_qla_host_t *ha = shost_priv(host);
-
 	if (timeout)
-		ha->port_down_retry_count = timeout;
+		rport->dev_loss_tmo = timeout;
 	else
-		ha->port_down_retry_count = 1;
-
-	rport->dev_loss_tmo = ha->port_down_retry_count + 5;
+		rport->dev_loss_tmo = 1;
 }
 
 static void
@@ -1275,7 +1261,6 @@ struct fc_function_template qla2xxx_transport_functions = {
 	.get_starget_port_id  = qla2x00_get_starget_port_id,
 	.show_starget_port_id = 1,
 
-	.get_rport_dev_loss_tmo = qla2x00_get_rport_loss_tmo,
 	.set_rport_dev_loss_tmo = qla2x00_set_rport_loss_tmo,
 	.show_rport_dev_loss_tmo = 1,
 
@@ -1320,7 +1305,6 @@ struct fc_function_template qla2xxx_transport_vport_functions = {
 	.get_starget_port_id  = qla2x00_get_starget_port_id,
 	.show_starget_port_id = 1,
 
-	.get_rport_dev_loss_tmo = qla2x00_get_rport_loss_tmo,
 	.set_rport_dev_loss_tmo = qla2x00_set_rport_loss_tmo,
 	.show_rport_dev_loss_tmo = 1,
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index c5ad858e17e..047ee644aa9 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1107,7 +1107,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
 	else
 		scsi_deactivate_tcq(sdev, ha->max_q_depth);
 
-	rport->dev_loss_tmo = ha->port_down_retry_count + 5;
+	rport->dev_loss_tmo = ha->port_down_retry_count;
 
 	return 0;
 }
-- 
cgit v1.2.3


From e5f5f6f72b10c4c6209f0522a7c5b27079d64429 Mon Sep 17 00:00:00 2001
From: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:49 -0700
Subject: [SCSI] qla2xxx: Track total number of ISP aborts.

This parameter counts the total number of ISP aborts during
driver execution.  The value is exported through a DEVICE_ATTR()
off the scsi_host.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_attr.c | 13 +++++++++++++
 drivers/scsi/qla2xxx/qla_def.h  |  5 +++++
 drivers/scsi/qla2xxx/qla_init.c |  1 +
 3 files changed, 19 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 8728e873996..43e40089473 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -809,6 +809,16 @@ qla2x00_optrom_fw_version_show(struct device *dev,
 	    ha->fw_revision[3]);
 }
 
+static ssize_t
+qla2x00_total_isp_aborts_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	scsi_qla_host_t *ha = shost_priv(class_to_shost(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+	    ha->qla_stats.total_isp_aborts);
+}
+
 static DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL);
 static DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
 static DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
@@ -831,6 +841,8 @@ static DEVICE_ATTR(optrom_fcode_version, S_IRUGO,
 		   qla2x00_optrom_fcode_version_show, NULL);
 static DEVICE_ATTR(optrom_fw_version, S_IRUGO, qla2x00_optrom_fw_version_show,
 		   NULL);
+static DEVICE_ATTR(total_isp_aborts, S_IRUGO, qla2x00_total_isp_aborts_show,
+		   NULL);
 
 struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_driver_version,
@@ -849,6 +861,7 @@ struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_optrom_efi_version,
 	&dev_attr_optrom_fcode_version,
 	&dev_attr_optrom_fw_version,
+	&dev_attr_total_isp_aborts,
 	NULL,
 };
 
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 7b0ddc83413..fe1eada6cfc 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2154,6 +2154,10 @@ struct qla_chip_state_84xx {
 	uint32_t gold_fw_version;
 };
 
+struct qla_statistics {
+	uint32_t total_isp_aborts;
+};
+
 /*
  * Linux Host Adapter structure
  */
@@ -2595,6 +2599,7 @@ typedef struct scsi_qla_host {
 	int		cur_vport_count;
 
 	struct qla_chip_state_84xx *cs84xx;
+	struct qla_statistics qla_stats;
 } scsi_qla_host_t;
 
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index c7388fadf22..833a6429d9b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3237,6 +3237,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 	if (ha->flags.online) {
 		ha->flags.online = 0;
 		clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+		ha->qla_stats.total_isp_aborts++;
 
 		qla_printk(KERN_INFO, ha,
 		    "Performing ISP error recovery - ha= %p.\n", ha);
-- 
cgit v1.2.3


From 032d8dd739eccbb39c78c901beece70062d1820d Mon Sep 17 00:00:00 2001
From: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:50 -0700
Subject: [SCSI] qla2xxx: Add LIP count to FC-transport statistics.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_attr.c | 1 +
 drivers/scsi/qla2xxx/qla_def.h  | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 43e40089473..40b5d656ab6 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1071,6 +1071,7 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
 	pfc_host_stat->invalid_tx_word_count = stats->inval_xmit_word_cnt;
 	pfc_host_stat->invalid_crc_count = stats->inval_crc_cnt;
 	if (IS_FWI2_CAPABLE(ha)) {
+		pfc_host_stat->lip_count = stats->lip_cnt;
 		pfc_host_stat->tx_frames = stats->tx_frames;
 		pfc_host_stat->rx_frames = stats->rx_frames;
 		pfc_host_stat->dumped_frames = stats->dumped_frames;
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index fe1eada6cfc..2b1bc57adf2 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -864,7 +864,8 @@ struct link_statistics {
 	uint32_t prim_seq_err_cnt;
 	uint32_t inval_xmit_word_cnt;
 	uint32_t inval_crc_cnt;
-	uint32_t unused1[0x1b];
+	uint32_t lip_cnt;
+	uint32_t unused1[0x1a];
 	uint32_t tx_frames;
 	uint32_t rx_frames;
 	uint32_t dumped_frames;
-- 
cgit v1.2.3


From 711c1d916be083a5bf4fbc8e66201e7e9f8b9334 Mon Sep 17 00:00:00 2001
From: Seokmann Ju <seokmann.ju@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:51 -0700
Subject: [SCSI] qla2xxx: Cleanup NPIV related functions

Removed repeated or unnecessary operations during vport
creation/deletion.

Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com>
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_attr.c |  6 ------
 drivers/scsi/qla2xxx/qla_def.h  |  1 -
 drivers/scsi/qla2xxx/qla_gbl.h  |  1 -
 drivers/scsi/qla2xxx/qla_mid.c  | 11 +++--------
 drivers/scsi/qla2xxx/qla_os.c   |  8 +-------
 5 files changed, 4 insertions(+), 23 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 40b5d656ab6..fe8d70862d5 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1200,17 +1200,11 @@ vport_create_failed_2:
 static int
 qla24xx_vport_delete(struct fc_vport *fc_vport)
 {
-	scsi_qla_host_t *ha = shost_priv(fc_vport->shost);
 	scsi_qla_host_t *vha = fc_vport->dd_data;
 
 	qla24xx_disable_vp(vha);
 	qla24xx_deallocate_vp_id(vha);
 
-	mutex_lock(&ha->vport_lock);
-	ha->cur_vport_count--;
-	clear_bit(vha->vp_idx, ha->vp_idx_map);
-	mutex_unlock(&ha->vport_lock);
-
 	kfree(vha->node_name);
 	kfree(vha->port_name);
 
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 2b1bc57adf2..00c7052a70a 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2170,7 +2170,6 @@ typedef struct scsi_qla_host {
 	struct pci_dev	*pdev;
 
 	unsigned long	host_no;
-	unsigned long	instance;
 
 	volatile struct {
 		uint32_t	init_done		:1;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 5a50fb74972..1d57ddd74fd 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -62,7 +62,6 @@ extern int ql2xfdmienable;
 extern int ql2xallocfwdump;
 extern int ql2xextended_error_logging;
 extern int ql2xqfullrampup;
-extern int num_hosts;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 62a3ad6e8ec..fa35339b7b6 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -43,6 +43,7 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha)
 
 	set_bit(vp_id, ha->vp_idx_map);
 	ha->num_vhosts++;
+	ha->cur_vport_count++;
 	vha->vp_idx = vp_id;
 	list_add_tail(&vha->vp_list, &ha->vp_list);
 	mutex_unlock(&ha->vport_lock);
@@ -58,6 +59,7 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha)
 	mutex_lock(&ha->vport_lock);
 	vp_id = vha->vp_idx;
 	ha->num_vhosts--;
+	ha->cur_vport_count--;
 	clear_bit(vp_id, ha->vp_idx_map);
 	list_del(&vha->vp_list);
 	mutex_unlock(&ha->vport_lock);
@@ -390,7 +392,6 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	vha->parent = ha;
 	vha->fc_vport = fc_vport;
 	vha->device_flags = 0;
-	vha->instance = num_hosts;
 	vha->vp_idx = qla24xx_allocate_vp_id(vha);
 	if (vha->vp_idx > ha->max_npiv_vports) {
 		DEBUG15(printk("scsi(%ld): Couldn't allocate vp_id.\n",
@@ -428,7 +429,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	host->max_cmd_len = MAX_CMDSZ;
 	host->max_channel = MAX_BUSES - 1;
 	host->max_lun = MAX_LUNS;
-	host->unique_id = vha->instance;
+	host->unique_id = host->host_no;
 	host->max_id = MAX_TARGETS_2200;
 	host->transportt = qla2xxx_transport_vport_template;
 
@@ -436,12 +437,6 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	    vha->host_no, vha));
 
 	vha->flags.init_done = 1;
-	num_hosts++;
-
-	mutex_lock(&ha->vport_lock);
-	set_bit(vha->vp_idx, ha->vp_idx_map);
-	ha->cur_vport_count++;
-	mutex_unlock(&ha->vport_lock);
 
 	return vha;
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 047ee644aa9..e98d502d649 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -27,7 +27,6 @@ char qla2x00_version_str[40];
  */
 static struct kmem_cache *srb_cachep;
 
-int num_hosts;
 int ql2xlogintimeout = 20;
 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xlogintimeout,
@@ -1663,9 +1662,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 	host->can_queue = ha->request_q_length + 128;
 
-	/* load the F/W, read paramaters, and init the H/W */
-	ha->instance = num_hosts;
-
 	mutex_init(&ha->vport_lock);
 	init_completion(&ha->mbx_cmd_comp);
 	complete(&ha->mbx_cmd_comp);
@@ -1713,7 +1709,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
-	host->unique_id = ha->instance;
+	host->unique_id = host->host_no;
 	host->max_cmd_len = MAX_CMDSZ;
 	host->max_channel = MAX_BUSES - 1;
 	host->max_lun = MAX_LUNS;
@@ -1734,8 +1730,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ha->flags.init_done = 1;
 	ha->flags.online = 1;
 
-	num_hosts++;
-
 	ret = scsi_add_host(host, &pdev->dev);
 	if (ret)
 		goto probe_failed;
-- 
cgit v1.2.3


From e5896bd5dcf71fa43ddcc545340b847c13d29c44 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:52 -0700
Subject: [SCSI] qla2xxx: Allow the user the option of disabling iIDMA.

iIDMA support requires the driver issue several additional
fabric-managegment (FM) commands per port discovered during SNS
scanning -- GFPN (Get Fabric Port Name) and GPSC (Get Port Speed
Capabilities).  It has been found during testing that some
switches do not respond as *well* as expected to these commands
(silence -- no ACC nor BS_RJT).  So, to handle such conditions,
allow the user the ability to indirectly disable the FM commands
by disabling iIDMA with the ql2xiidmaenable module-parameter.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_gbl.h  | 1 +
 drivers/scsi/qla2xxx/qla_init.c | 3 ++-
 drivers/scsi/qla2xxx/qla_os.c   | 7 +++++++
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 1d57ddd74fd..f921ccdcc61 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -62,6 +62,7 @@ extern int ql2xfdmienable;
 extern int ql2xallocfwdump;
 extern int ql2xextended_error_logging;
 extern int ql2xqfullrampup;
+extern int ql2xiidmaenable;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 833a6429d9b..f4cd2cd874b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2559,7 +2559,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
 		} else if (qla2x00_gnn_id(ha, swl) != QLA_SUCCESS) {
 			kfree(swl);
 			swl = NULL;
-		} else if (qla2x00_gfpn_id(ha, swl) == QLA_SUCCESS) {
+		} else if (ql2xiidmaenable &&
+		    qla2x00_gfpn_id(ha, swl) == QLA_SUCCESS) {
 			qla2x00_gpsc(ha, swl);
 		}
 	}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e98d502d649..9c3a57fa506 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -86,6 +86,13 @@ MODULE_PARM_DESC(ql2xqfullrampup,
 		"depth for a device after a queue-full condition has been "
 		"detected.  Default is 120 seconds.");
 
+int ql2xiidmaenable=1;
+module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xiidmaenable,
+		"Enables iIDMA settings "
+		"Default is 1 - perform iIDMA. 0 - no iIDMA.");
+
+
 /*
  * SCSI host template entry points
  */
-- 
cgit v1.2.3


From 1ee2714632ce3f7e6477069b41cb685112f5f217 Mon Sep 17 00:00:00 2001
From: Joe Carnuccio <joe.carnuccio@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:53 -0700
Subject: [SCSI] qla2xxx: Retrieve board serial-number and description from
 VPD.

Recent ISPs have this information written at manufacturing time,
so use the information.  This also reduces future churn of the
qla_devtbl.h file contents, as the driver can now depend on the
information to be present in VPD.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_attr.c |  6 ++++--
 drivers/scsi/qla2xxx/qla_def.h  |  2 +-
 drivers/scsi/qla2xxx/qla_gbl.h  |  1 +
 drivers/scsi/qla2xxx/qla_init.c | 11 ++++++++--
 drivers/scsi/qla2xxx/qla_sup.c  | 45 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 60 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index fe8d70862d5..612e3d0c7bd 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -557,8 +557,10 @@ qla2x00_serial_num_show(struct device *dev, struct device_attribute *attr,
 	scsi_qla_host_t *ha = shost_priv(class_to_shost(dev));
 	uint32_t sn;
 
-	if (IS_FWI2_CAPABLE(ha))
-		return snprintf(buf, PAGE_SIZE, "\n");
+	if (IS_FWI2_CAPABLE(ha)) {
+		qla2xxx_get_vpd_field(ha, "SN", buf, PAGE_SIZE);
+		return snprintf(buf, PAGE_SIZE, "%s\n", buf);
+	}
 
 	sn = ((ha->serial0 & 0x1f) << 16) | (ha->serial2 << 8) | ha->serial1;
 	return snprintf(buf, PAGE_SIZE, "%c%05d\n", 'A' + sn / 100000,
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 00c7052a70a..6da31ba9440 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2518,7 +2518,7 @@ typedef struct scsi_qla_host {
 
 	uint8_t		model_number[16+1];
 #define BINZERO		"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
-	char		*model_desc;
+	char		model_desc[80];
 	uint8_t		adapter_id[16+1];
 
 	uint8_t		*node_name;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f921ccdcc61..0b156735e9a 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -314,6 +314,7 @@ extern int qla2xxx_hw_event_log(scsi_qla_host_t *, uint16_t , uint16_t,
     uint16_t, uint16_t);
 
 extern void qla2xxx_get_flash_info(scsi_qla_host_t *);
+extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t);
 
 /*
  * Global Function Prototypes in qla_dbg.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index f4cd2cd874b..08bdba520c9 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1501,18 +1501,25 @@ qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *de
 		index = (ha->pdev->subsystem_device & 0xff);
 		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES)
-			ha->model_desc = qla2x00_model_name[index * 2 + 1];
+			strncpy(ha->model_desc,
+			    qla2x00_model_name[index * 2 + 1],
+			    sizeof(ha->model_desc) - 1);
 	} else {
 		index = (ha->pdev->subsystem_device & 0xff);
 		if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
 		    index < QLA_MODEL_NAMES) {
 			strcpy(ha->model_number,
 			    qla2x00_model_name[index * 2]);
-			ha->model_desc = qla2x00_model_name[index * 2 + 1];
+			strncpy(ha->model_desc,
+			    qla2x00_model_name[index * 2 + 1],
+			    sizeof(ha->model_desc) - 1);
 		} else {
 			strcpy(ha->model_number, def);
 		}
 	}
+	if (IS_FWI2_CAPABLE(ha))
+		qla2xxx_get_vpd_field(ha, "\x82", ha->model_desc,
+		    sizeof(ha->model_desc));
 }
 
 /* On sparc systems, obtain port and node WWN from firmware
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index ebea62246c8..1bca7447493 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -2302,6 +2302,51 @@ qla24xx_get_flash_version(scsi_qla_host_t *ha, void *mbuf)
 	return ret;
 }
 
+static int
+qla2xxx_is_vpd_valid(uint8_t *pos, uint8_t *end)
+{
+	if (pos >= end || *pos != 0x82)
+		return 0;
+
+	pos += 3 + pos[1];
+	if (pos >= end || *pos != 0x90)
+		return 0;
+
+	pos += 3 + pos[1];
+	if (pos >= end || *pos != 0x78)
+		return 0;
+
+	return 1;
+}
+
+int
+qla2xxx_get_vpd_field(scsi_qla_host_t *ha, char *key, char *str, size_t size)
+{
+	uint8_t *pos = ha->vpd;
+	uint8_t *end = pos + ha->vpd_size;
+	int len = 0;
+
+	if (!IS_FWI2_CAPABLE(ha) || !qla2xxx_is_vpd_valid(pos, end))
+		return 0;
+
+	while (pos < end && *pos != 0x78) {
+		len = (*pos == 0x82) ? pos[1] : pos[2];
+
+		if (!strncmp(pos, key, strlen(key)))
+			break;
+
+		if (*pos != 0x90 && *pos != 0x91)
+			pos += len;
+
+		pos += 3;
+	}
+
+	if (pos < end - len && *pos != 0x78)
+		return snprintf(str, size, "%.*s", len, pos + 3);
+
+	return 0;
+}
+
 static int
 qla2xxx_hw_event_store(scsi_qla_host_t *ha, uint32_t *fdata)
 {
-- 
cgit v1.2.3


From 436a7b11234ccccd91e3000aacdbdd25bd7847a8 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:54 -0700
Subject: [SCSI] qla2xxx: Swap enablement order of EFT and FCE.

The firmware group has suggested that FCE (Fibre Channel Event)
tracing be enabled prior to EFT (Extended Firmware Tracing) to
maximize the capturing of data on the wire.  This change has no
real semantic effect on driver operation, as it's mostly a
shuffling of code.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 80 ++++++++++++++++++++---------------------
 1 file changed, 40 insertions(+), 40 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 08bdba520c9..80f4f9de818 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -768,42 +768,16 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 		mem_size = (ha->fw_memory_size - 0x100000 + 1) *
 		    sizeof(uint32_t);
 
-		/* Allocate memory for Extended Trace Buffer. */
-		tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
-		    GFP_KERNEL);
-		if (!tc) {
-			qla_printk(KERN_WARNING, ha, "Unable to allocate "
-			    "(%d KB) for EFT.\n", EFT_SIZE / 1024);
-			goto cont_alloc;
-		}
-
-		memset(tc, 0, EFT_SIZE);
-		rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
-		if (rval) {
-			qla_printk(KERN_WARNING, ha, "Unable to initialize "
-			    "EFT (%d).\n", rval);
-			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
-			    tc_dma);
-			goto cont_alloc;
-		}
-
-		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
-		    EFT_SIZE / 1024);
-
-		eft_size = EFT_SIZE;
-		ha->eft_dma = tc_dma;
-		ha->eft = tc;
-
 		/* Allocate memory for Fibre Channel Event Buffer. */
 		if (!IS_QLA25XX(ha))
-			goto cont_alloc;
+			goto try_eft;
 
 		tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
 		    GFP_KERNEL);
 		if (!tc) {
 			qla_printk(KERN_WARNING, ha, "Unable to allocate "
 			    "(%d KB) for FCE.\n", FCE_SIZE / 1024);
-			goto cont_alloc;
+			goto try_eft;
 		}
 
 		memset(tc, 0, FCE_SIZE);
@@ -815,7 +789,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 			dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc,
 			    tc_dma);
 			ha->flags.fce_enabled = 0;
-			goto cont_alloc;
+			goto try_eft;
 		}
 
 		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for FCE...\n",
@@ -825,6 +799,32 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 		ha->flags.fce_enabled = 1;
 		ha->fce_dma = tc_dma;
 		ha->fce = tc;
+try_eft:
+		/* Allocate memory for Extended Trace Buffer. */
+		tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma,
+		    GFP_KERNEL);
+		if (!tc) {
+			qla_printk(KERN_WARNING, ha, "Unable to allocate "
+			    "(%d KB) for EFT.\n", EFT_SIZE / 1024);
+			goto cont_alloc;
+		}
+
+		memset(tc, 0, EFT_SIZE);
+		rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS);
+		if (rval) {
+			qla_printk(KERN_WARNING, ha, "Unable to initialize "
+			    "EFT (%d).\n", rval);
+			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc,
+			    tc_dma);
+			goto cont_alloc;
+		}
+
+		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
+		    EFT_SIZE / 1024);
+
+		eft_size = EFT_SIZE;
+		ha->eft_dma = tc_dma;
+		ha->eft = tc;
 	}
 cont_alloc:
 	req_q_size = ha->request_q_length * sizeof(request_t);
@@ -3286,17 +3286,6 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 			ha->isp_abort_cnt = 0;
 			clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
 
-			if (ha->eft) {
-				memset(ha->eft, 0, EFT_SIZE);
-				rval = qla2x00_enable_eft_trace(ha,
-				    ha->eft_dma, EFT_NUM_BUFFERS);
-				if (rval) {
-					qla_printk(KERN_WARNING, ha,
-					    "Unable to reinitialize EFT "
-					    "(%d).\n", rval);
-				}
-			}
-
 			if (ha->fce) {
 				ha->flags.fce_enabled = 1;
 				memset(ha->fce, 0,
@@ -3311,6 +3300,17 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 					ha->flags.fce_enabled = 0;
 				}
 			}
+
+			if (ha->eft) {
+				memset(ha->eft, 0, EFT_SIZE);
+				rval = qla2x00_enable_eft_trace(ha,
+				    ha->eft_dma, EFT_NUM_BUFFERS);
+				if (rval) {
+					qla_printk(KERN_WARNING, ha,
+					    "Unable to reinitialize EFT "
+					    "(%d).\n", rval);
+				}
+			}
 		} else {	/* failed the ISP abort */
 			ha->flags.online = 1;
 			if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
-- 
cgit v1.2.3


From 246de42cfc0abc4e25585f2dca53f8226f62391c Mon Sep 17 00:00:00 2001
From: Seokmann Ju <seokmann.ju@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:55 -0700
Subject: [SCSI] qla2xxx: Always aquire the parent's hardware_lock.

While issuing a marker, manipulating the request/response queues
and modifying the outstanding command array.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c |  2 +-
 drivers/scsi/qla2xxx/qla_iocb.c | 23 +++++++++++++----------
 drivers/scsi/qla2xxx/qla_mbx.c  | 10 ++++++----
 3 files changed, 20 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 80f4f9de818..4c83ff81d79 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4052,7 +4052,7 @@ qla24xx_configure_vhba(scsi_qla_host_t *ha)
 	rval = qla2x00_fw_ready(ha->parent);
 	if (rval == QLA_SUCCESS) {
 		clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
-		qla2x00_marker(ha->parent, 0, 0, MK_SYNC_ALL);
+		qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
 	}
 
 	ha->flags.management_server_logged_in = 0;
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 5489d502467..6e14c8eaca8 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -269,7 +269,7 @@ qla2x00_start_scsi(srb_t *sp)
 {
 	int		ret, nseg;
 	unsigned long   flags;
-	scsi_qla_host_t	*ha;
+	scsi_qla_host_t	*ha, *pha;
 	struct scsi_cmnd *cmd;
 	uint32_t	*clr_ptr;
 	uint32_t        index;
@@ -283,6 +283,7 @@ qla2x00_start_scsi(srb_t *sp)
 	/* Setup device pointers. */
 	ret = 0;
 	ha = sp->ha;
+	pha = to_qla_parent(ha);
 	reg = &ha->iobase->isp;
 	cmd = sp->cmd;
 	/* So we know we haven't pci_map'ed anything yet */
@@ -297,7 +298,7 @@ qla2x00_start_scsi(srb_t *sp)
 	}
 
 	/* Acquire ring specific lock */
-	spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&pha->hardware_lock, flags);
 
 	/* Check for room in outstanding command list. */
 	handle = ha->current_outstanding_cmd;
@@ -386,14 +387,14 @@ qla2x00_start_scsi(srb_t *sp)
 	    ha->response_ring_ptr->signature != RESPONSE_PROCESSED)
 		qla2x00_process_response_queue(ha);
 
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 	return (QLA_SUCCESS);
 
 queuing_error:
 	if (tot_dsds)
 		scsi_dma_unmap(cmd);
 
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 
 	return (QLA_FUNCTION_FAILED);
 }
@@ -454,10 +455,11 @@ qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun,
 {
 	int ret;
 	unsigned long flags = 0;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
-	spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&pha->hardware_lock, flags);
 	ret = __qla2x00_marker(ha, loop_id, lun, type);
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 
 	return (ret);
 }
@@ -672,7 +674,7 @@ qla24xx_start_scsi(srb_t *sp)
 {
 	int		ret, nseg;
 	unsigned long   flags;
-	scsi_qla_host_t	*ha;
+	scsi_qla_host_t	*ha, *pha;
 	struct scsi_cmnd *cmd;
 	uint32_t	*clr_ptr;
 	uint32_t        index;
@@ -686,6 +688,7 @@ qla24xx_start_scsi(srb_t *sp)
 	/* Setup device pointers. */
 	ret = 0;
 	ha = sp->ha;
+	pha = to_qla_parent(ha);
 	reg = &ha->iobase->isp24;
 	cmd = sp->cmd;
 	/* So we know we haven't pci_map'ed anything yet */
@@ -700,7 +703,7 @@ qla24xx_start_scsi(srb_t *sp)
 	}
 
 	/* Acquire ring specific lock */
-	spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&pha->hardware_lock, flags);
 
 	/* Check for room in outstanding command list. */
 	handle = ha->current_outstanding_cmd;
@@ -795,14 +798,14 @@ qla24xx_start_scsi(srb_t *sp)
 	    ha->response_ring_ptr->signature != RESPONSE_PROCESSED)
 		qla24xx_process_response_queue(ha);
 
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 	return QLA_SUCCESS;
 
 queuing_error:
 	if (tot_dsds)
 		scsi_dma_unmap(cmd);
 
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 
 	return QLA_FUNCTION_FAILED;
 }
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 250d2f60439..dc5788bbc54 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -749,17 +749,18 @@ qla2x00_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 	uint32_t	handle;
 	mbx_cmd_t	mc;
 	mbx_cmd_t	*mcp = &mc;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha->host_no));
 
 	fcport = sp->fcport;
 
-	spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&pha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
 		if (ha->outstanding_cmds[handle] == sp)
 			break;
 	}
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 
 	if (handle == MAX_OUTSTANDING_COMMANDS) {
 		/* command not found */
@@ -2161,17 +2162,18 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 	struct abort_entry_24xx *abt;
 	dma_addr_t	abt_dma;
 	uint32_t	handle;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	fcport = sp->fcport;
 
-	spin_lock_irqsave(&ha->hardware_lock, flags);
+	spin_lock_irqsave(&pha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
 		if (ha->outstanding_cmds[handle] == sp)
 			break;
 	}
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+	spin_unlock_irqrestore(&pha->hardware_lock, flags);
 	if (handle == MAX_OUTSTANDING_COMMANDS) {
 		/* Command not found. */
 		return QLA_FUNCTION_FAILED;
-- 
cgit v1.2.3


From 8f0d6436d215a2e0033ab2af192ac7e4b300bd3e Mon Sep 17 00:00:00 2001
From: Seokmann Ju <seokmann.ju@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:56 -0700
Subject: [SCSI] qla2xxx: Correct fcport state-management during loss.

All fcport->state management should be done within
qla2x00_mark_device_lost(), the assignment of state within
qla2x00_mark_vp_devices_dead() caused associated rports to not be
removed.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_mid.c |  1 -
 drivers/scsi/qla2xxx/qla_os.c  | 13 +++----------
 2 files changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index fa35339b7b6..e7565765fa1 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -105,7 +105,6 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
 		    "loop_id=0x%04x :%x\n",
 		    vha->host_no, fcport->loop_id, fcport->vp_idx));
 
-		atomic_set(&fcport->state, FCS_DEVICE_DEAD);
 		qla2x00_mark_device_lost(vha, fcport, 0, 0);
 	}
 }
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 9c3a57fa506..3f391698e1c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1931,7 +1931,7 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
 	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	list_for_each_entry(fcport, &pha->fcports, list) {
-		if (ha->vp_idx != 0 && ha->vp_idx != fcport->vp_idx)
+		if (ha->vp_idx != fcport->vp_idx)
 			continue;
 		/*
 		 * No point in marking the device as lost, if the device is
@@ -1939,17 +1939,10 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
 		 */
 		if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
 			continue;
-		if (atomic_read(&fcport->state) == FCS_ONLINE) {
-			if (defer)
-				qla2x00_schedule_rport_del(ha, fcport, defer);
-			else if (ha->vp_idx == fcport->vp_idx)
-				qla2x00_schedule_rport_del(ha, fcport, defer);
-		}
+		if (atomic_read(&fcport->state) == FCS_ONLINE)
+			qla2x00_schedule_rport_del(ha, fcport, defer);
 		atomic_set(&fcport->state, FCS_DEVICE_LOST);
 	}
-
-	if (defer)
-		qla2xxx_wake_dpc(ha);
 }
 
 /*
-- 
cgit v1.2.3


From da57bf8f25faf97308d9f4d0b87e8b69317a2fdf Mon Sep 17 00:00:00 2001
From: Seokmann Ju <seokmann.ju@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:57 -0700
Subject: [SCSI] qla2xxx: Correct vport management of MBA_PORT_UPDATE.

By allowing the qla2x00_alert_all_vps() to manage per-vport
recognition of the MBA.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_isr.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ec63b79f900..874d802edb7 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -542,10 +542,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 		break;
 
 	case MBA_PORT_UPDATE:		/* Port database update */
-		/* Only handle SCNs for our Vport index. */
-		if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
-			break;
-
 		/*
 		 * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
 		 * event etc. earlier indicating loop is down) then process
-- 
cgit v1.2.3


From 5de1f70f4103253f72d92da16d9618bc573b4534 Mon Sep 17 00:00:00 2001
From: Seokmann Ju <seokmann.ju@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:58 -0700
Subject: [SCSI] qla2xxx: Correct rport/fcport visibility-state handling during
 loop-resync.

There were several issues here, one, during RSCN handling if a
follow-on RSCN occurred (within interrupt context) the DPC thread
could inadvertantly leave the fcport in a stale lost state.
Secondly, scheduled rport removal is handled exclusively by the
'parent' DPC thread, so wake up the proper thread.  Finally,
process vport loop-resync's only when the vport has in an
"active" state (ID acquired).

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 4 +++-
 drivers/scsi/qla2xxx/qla_mid.c  | 3 ++-
 drivers/scsi/qla2xxx/qla_os.c   | 5 +++--
 3 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 4c83ff81d79..f8cfeb0e91a 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2012,8 +2012,10 @@ qla2x00_configure_loop(scsi_qla_host_t *ha)
 	if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
 		if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
 			set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
-		if (test_bit(RSCN_UPDATE, &save_flags))
+		if (test_bit(RSCN_UPDATE, &save_flags)) {
+			ha->flags.rscn_queue_overflow = 1;
 			set_bit(RSCN_UPDATE, &ha->dpc_flags);
+		}
 	}
 
 	return (rval);
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index e7565765fa1..9a850a24b38 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -277,7 +277,8 @@ qla2x00_do_dpc_vp(scsi_qla_host_t *vha)
 		clear_bit(RESET_ACTIVE, &vha->dpc_flags);
 	}
 
-	if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
+	if (atomic_read(&vha->vp_state) == VP_ACTIVE &&
+	    test_and_clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
 		if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags))) {
 			qla2x00_loop_resync(vha);
 			clear_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3f391698e1c..0f44914b41d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1849,6 +1849,7 @@ qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
     int defer)
 {
 	struct fc_rport *rport;
+	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	if (!fcport->rport)
 		return;
@@ -1858,8 +1859,8 @@ qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
 		spin_lock_irq(ha->host->host_lock);
 		fcport->drport = rport;
 		spin_unlock_irq(ha->host->host_lock);
-		set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
-		qla2xxx_wake_dpc(ha);
+		set_bit(FCPORT_UPDATE_NEEDED, &pha->dpc_flags);
+		qla2xxx_wake_dpc(pha);
 	} else
 		fc_remote_port_delete(rport);
 }
-- 
cgit v1.2.3


From 031e134e5f95233d80fb1b62fdaf5e1be587597c Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 10 Jul 2008 16:55:59 -0700
Subject: [SCSI] qla2xxx: Skip FDMI registration on ISP21xx/22xx parts.

Firmware does not have the facilities to issue management server
IOCBs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_gs.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 4cb80b476c8..c2a4bfbcb05 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1661,6 +1661,12 @@ qla2x00_fdmi_register(scsi_qla_host_t *ha)
 {
 	int rval;
 
+	if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
+		DEBUG2(printk("scsi(%ld): FDMI unsupported on "
+		    "ISP2100/ISP2200.\n", ha->host_no));
+		return QLA_SUCCESS;
+	}
+
 	rval = qla2x00_mgmt_svr_login(ha);
 	if (rval)
 		return rval;
-- 
cgit v1.2.3


From e792121ec85672c1fa48f79d13986a3f4f56c590 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 10 Jul 2008 16:56:00 -0700
Subject: [SCSI] qla2xxx: Correct overflow during dump-processing on
 large-memory ISP23xx parts.

Total ram words can exceed a 16bit value on large-memory boards.
Safely extend to a 32bit width.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_dbg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index cbef785765c..510ba64bc28 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -216,7 +216,7 @@ qla24xx_soft_reset(scsi_qla_host_t *ha)
 
 static int
 qla2xxx_dump_ram(scsi_qla_host_t *ha, uint32_t addr, uint16_t *ram,
-    uint16_t ram_words, void **nxt)
+    uint32_t ram_words, void **nxt)
 {
 	int rval;
 	uint32_t cnt, stat, timer, words, idx;
-- 
cgit v1.2.3


From 42e421b184967c8bc70d72eed8e1b179e9a51acb Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 10 Jul 2008 16:56:01 -0700
Subject: [SCSI] qla2xxx: Verify the RISC is not in ROM code if firmware-load
 is disabled.

Add an additional check to verify that the current executing
firmware is in fact non-ROM code.  The non-ROM Get-ID mailbox
command is used for verification.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 7 +++++++
 drivers/scsi/qla2xxx/qla_mbx.c  | 2 ++
 2 files changed, 9 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index f8cfeb0e91a..fd3ff5e5713 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -334,6 +334,8 @@ static int
 qla2x00_isp_firmware(scsi_qla_host_t *ha)
 {
 	int  rval;
+	uint16_t loop_id, topo, sw_cap;
+	uint8_t domain, area, al_pa;
 
 	/* Assume loading risc code */
 	rval = QLA_FUNCTION_FAILED;
@@ -345,6 +347,11 @@ qla2x00_isp_firmware(scsi_qla_host_t *ha)
 
 		/* Verify checksum of loaded RISC code. */
 		rval = qla2x00_verify_checksum(ha, ha->fw_srisc_address);
+		if (rval == QLA_SUCCESS) {
+			/* And, verify we are not in ROM code. */
+			rval = qla2x00_get_adapter_id(ha, &loop_id, &al_pa,
+			    &area, &domain, &topo, &sw_cap);
+		}
 	}
 
 	if (rval) {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index dc5788bbc54..7d7de592f72 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -919,6 +919,8 @@ qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa,
 	rval = qla2x00_mailbox_command(ha, mcp);
 	if (mcp->mb[0] == MBS_COMMAND_ERROR)
 		rval = QLA_COMMAND_ERROR;
+	else if (mcp->mb[0] == MBS_INVALID_COMMAND)
+		rval = QLA_INVALID_COMMAND;
 
 	/* Return data. */
 	*id = mcp->mb[1];
-- 
cgit v1.2.3


From 6d0525292ad13f17abcd4a21e488d5b667e90668 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 10 Jul 2008 16:56:02 -0700
Subject: [SCSI] qla2xxx: Don't hardcode fw_transfer_size for ISP2[45]xx parts.

Use the full buffer size available, as there's no reason to limit
the firwmare-image load-segment size for these parts.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index fd3ff5e5713..44c0117c5d2 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -729,7 +729,7 @@ qla24xx_chip_diag(scsi_qla_host_t *ha)
 	/* Perform RISC reset. */
 	qla24xx_reset_risc(ha);
 
-	ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
+	ha->fw_transfer_size = REQUEST_ENTRY_SIZE * ha->request_q_length;
 
 	rval = qla2x00_mbx_reg_test(ha);
 	if (rval) {
-- 
cgit v1.2.3


From f0773b5ff6d6978c01525f0c34db42d5cedb9394 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 10 Jul 2008 16:56:03 -0700
Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k5.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index d058c8862b3..ae60229472f 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.02.01-k4"
+#define QLA2XXX_VERSION      "8.02.01-k5"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	2
-- 
cgit v1.2.3


From 626dcb1ee39aa1010c27df31970ff0ecfb287208 Mon Sep 17 00:00:00 2001
From: Kai Makisara <Kai.Makisara@kolumbus.fi>
Date: Fri, 11 Jul 2008 15:05:25 +0300
Subject: [SCSI] st: Move buffer pointer back when data could not be written.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Move buffer pointer back when data could not be written. Bug found by
Mike Christie.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/st.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 4684cc716aa..41b1f81b165 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -17,7 +17,7 @@
    Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
  */
 
-static const char *verstr = "20080224";
+static const char *verstr = "20080504";
 
 #include <linux/module.h>
 
@@ -1670,6 +1670,7 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
 				if (undone <= do_count) {
 					/* Only data from this write is not written */
 					count += undone;
+					b_point -= undone;
 					do_count -= undone;
 					if (STp->block_size)
 						blks = (transfer - undone) / STp->block_size;
-- 
cgit v1.2.3


From 786231af0a4ac6d78cef51fa7e9c3dd63f016195 Mon Sep 17 00:00:00 2001
From: Kai Makisara <Kai.Makisara@kolumbus.fi>
Date: Fri, 11 Jul 2008 15:06:40 +0300
Subject: [SCSI] st: Remove bogus memset
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Mike Christie noticed a bogus memset. It can be removed as dead code
since the number of bytes in the driver buffer in fixed block mode is
always a multiple of the tape block size.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/st.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 41b1f81b165..c2bb53e3d94 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -631,7 +631,7 @@ static int cross_eof(struct scsi_tape * STp, int forward)
 /* Flush the write buffer (never need to write if variable blocksize). */
 static int st_flush_write_buffer(struct scsi_tape * STp)
 {
-	int offset, transfer, blks;
+	int transfer, blks;
 	int result;
 	unsigned char cmd[MAX_COMMAND_SIZE];
 	struct st_request *SRpnt;
@@ -644,14 +644,10 @@ static int st_flush_write_buffer(struct scsi_tape * STp)
 	result = 0;
 	if (STp->dirty == 1) {
 
-		offset = (STp->buffer)->buffer_bytes;
-		transfer = ((offset + STp->block_size - 1) /
-			    STp->block_size) * STp->block_size;
+		transfer = STp->buffer->buffer_bytes;
                 DEBC(printk(ST_DEB_MSG "%s: Flushing %d bytes.\n",
                                tape_name(STp), transfer));
 
-		memset((STp->buffer)->b_data + offset, 0, transfer - offset);
-
 		memset(cmd, 0, MAX_COMMAND_SIZE);
 		cmd[0] = WRITE_6;
 		cmd[1] = 1;
-- 
cgit v1.2.3


From 885ace9e2f120439043ffa1bb72a2fa1f3afc645 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Fri, 11 Jul 2008 19:50:32 -0500
Subject: [SCSI] fix shared tag map setup

Currently qla4xxx and stex pass in their can_queue values into
scsi_activate_tcq because they wanted the tag map that large.
The problem with this is that it ends up also setting the queue
depth to that large value. All we want to do this in this case
is set the device queue depth and the other device settings.
We do not need to touch the tag map sizing because the drivers
had setup that map according to their can_queue limits when the
shared map was created.

The scsi mid layer in request_fn will then handle the case where we
have more requests than available tags when it checks the host
queue ready function.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 36c92f961e1..5276e73c58f 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -902,11 +902,20 @@ void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags)
 
 	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 
-	/* Check to see if the queue is managed by the block layer.
-	 * If it is, and we fail to adjust the depth, exit. */
-	if (blk_queue_tagged(sdev->request_queue) &&
-	    blk_queue_resize_tags(sdev->request_queue, tags) != 0)
-		goto out;
+	/*
+	 * Check to see if the queue is managed by the block layer.
+	 * If it is, and we fail to adjust the depth, exit.
+	 *
+	 * Do not resize the tag map if it is a host wide share bqt,
+	 * because the size should be the hosts's can_queue. If there
+	 * is more IO than the LLD's can_queue (so there are not enuogh
+	 * tags) request_fn's host queue ready check will handle it.
+	 */
+	if (!sdev->host->bqt) {
+		if (blk_queue_tagged(sdev->request_queue) &&
+		    blk_queue_resize_tags(sdev->request_queue, tags) != 0)
+			goto out;
+	}
 
 	sdev->queue_depth = tags;
 	switch (tagged) {
-- 
cgit v1.2.3


From d510d965e17a81d4d41c03a3927f6ef450b73ff5 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Fri, 11 Jul 2008 19:50:33 -0500
Subject: [SCSI] qla4xxx: fix queue depth setting

We want to set the queue depth to something reasonable - not
the can_queue.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla4xxx/ql4_os.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 5822dd59582..88bebb13bc5 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -46,6 +46,8 @@ MODULE_PARM_DESC(ql4xextended_error_logging,
 
 int ql4_mod_unload = 0;
 
+#define QL4_DEF_QDEPTH 32
+
 /*
  * SCSI host template entry points
  */
@@ -1387,7 +1389,7 @@ static int qla4xxx_slave_alloc(struct scsi_device *sdev)
 
 	sdev->hostdata = ddb;
 	sdev->tagged_supported = 1;
-	scsi_activate_tcq(sdev, sdev->host->can_queue);
+	scsi_activate_tcq(sdev, QL4_DEF_QDEPTH);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 5d90027fb579eee41ec1b61f23195ed2fdd51da2 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Fri, 11 Jul 2008 19:50:34 -0500
Subject: [SCSI] stex: fix queue depth setting

We want to set the queue depth to something reasonable - not
the can_queue.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/stex.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index f308a030882..3790906a77d 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -467,7 +467,7 @@ stex_slave_alloc(struct scsi_device *sdev)
 	/* Cheat: usually extracted from Inquiry data */
 	sdev->tagged_supported = 1;
 
-	scsi_activate_tcq(sdev, sdev->host->can_queue);
+	scsi_activate_tcq(sdev, ST_CMD_PER_LUN);
 
 	return 0;
 }
-- 
cgit v1.2.3


From ecefe8a97577d6c1a68d14ab6fb19bce99448af2 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Fri, 11 Jul 2008 19:50:35 -0500
Subject: [SCSI] fix shared tag map tag allocation

When drivers use a shared tag map we can end up with more requests
than tags, because the tag map is shost->can_queue tags and there
can be sdevs * sdev->queue_depth requests. In scsi_request_fn
if tag allocation fails we just drop down to just dequeueing the
tag without a tag. The problem is that drivers using the shared tag
map rely on a valid tag always being set, because it will use the
tag number to lookup commands later.

This patch has us check if we got a valid tag when the host lock
is held right before we check if the host queue is ready. We do the
check here because to allocate the tag we need the q lock, but
if the tag is bad we want to add the device/q onto the starved list
which requires the host lock.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_lib.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 88d1b5f44e5..fe77ccacf31 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1497,6 +1497,21 @@ static void scsi_request_fn(struct request_queue *q)
 		}
 		spin_lock(shost->host_lock);
 
+		/*
+		 * We hit this when the driver is using a host wide
+		 * tag map. For device level tag maps the queue_depth check
+		 * in the device ready fn would prevent us from trying
+		 * to allocate a tag. Since the map is a shared host resource
+		 * we add the dev to the starved list so it eventually gets
+		 * a run when a tag is freed.
+		 */
+		if (blk_queue_tagged(q) && (req->tag == -1)) {
+			if (list_empty(&sdev->starved_entry))
+				list_add_tail(&sdev->starved_entry,
+					      &shost->starved_list);
+			goto not_ready;
+		}
+
 		if (!scsi_host_queue_ready(q, shost, sdev))
 			goto not_ready;
 		if (scsi_target(sdev)->single_lun) {
-- 
cgit v1.2.3


From f27bac2761cab5a2e212dea602d22457a9aa6943 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 14 Jul 2008 14:59:30 +0900
Subject: [SCSI] sd: update index allocation and use ida instead of idr

Update index allocation as follows.

* sd_index_idr is used only for ID allocation and mapping
  functionality is not used.  Use more memory efficient ida instead.

* idr and ida have their own locks inside them and don't need them for
  operation.  Drop it.

* index wasn't freed if probing failed after index allocation.  fix
  it.

* ida allocation should be repeated if it fails with -EAGAIN.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/sd.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0c63947d8a9..99dddcae785 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -99,8 +99,7 @@ static void scsi_disk_release(struct device *cdev);
 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
 static void sd_print_result(struct scsi_disk *, int);
 
-static DEFINE_IDR(sd_index_idr);
-static DEFINE_SPINLOCK(sd_index_lock);
+static DEFINE_IDA(sd_index_ida);
 
 /* This semaphore is used to mediate the 0->1 reference get in the
  * face of object destruction (i.e. we can't allow a get on an
@@ -1643,18 +1642,20 @@ static int sd_probe(struct device *dev)
 	if (!gd)
 		goto out_free;
 
-	if (!idr_pre_get(&sd_index_idr, GFP_KERNEL))
-		goto out_put;
+	do {
+		if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
+			goto out_put;
 
-	spin_lock(&sd_index_lock);
-	error = idr_get_new(&sd_index_idr, NULL, &index);
-	spin_unlock(&sd_index_lock);
+		error = ida_get_new(&sd_index_ida, &index);
+	} while (error == -EAGAIN);
 
-	if (index >= SD_MAX_DISKS)
-		error = -EBUSY;
 	if (error)
 		goto out_put;
 
+	error = -EBUSY;
+	if (index >= SD_MAX_DISKS)
+		goto out_free_index;
+
 	sdkp->device = sdp;
 	sdkp->driver = &sd_template;
 	sdkp->disk = gd;
@@ -1675,7 +1676,7 @@ static int sd_probe(struct device *dev)
 	strncpy(sdkp->dev.bus_id, sdp->sdev_gendev.bus_id, BUS_ID_SIZE);
 
 	if (device_add(&sdkp->dev))
-		goto out_put;
+		goto out_free_index;
 
 	get_device(&sdp->sdev_gendev);
 
@@ -1717,6 +1718,8 @@ static int sd_probe(struct device *dev)
 
 	return 0;
 
+ out_free_index:
+	ida_remove(&sd_index_ida, index);
  out_put:
 	put_disk(gd);
  out_free:
@@ -1766,9 +1769,7 @@ static void scsi_disk_release(struct device *dev)
 	struct scsi_disk *sdkp = to_scsi_disk(dev);
 	struct gendisk *disk = sdkp->disk;
 	
-	spin_lock(&sd_index_lock);
-	idr_remove(&sd_index_idr, sdkp->index);
-	spin_unlock(&sd_index_lock);
+	ida_remove(&sd_index_ida, sdkp->index);
 
 	disk->private_data = NULL;
 	put_disk(disk);
-- 
cgit v1.2.3


From 6d49f63b415ca02223e01e187076cb69a5a38eaf Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Tue, 15 Jul 2008 14:54:16 -0600
Subject: [SCSI] Make host_no an unsigned int

Daniel Debonzi reports that he has managed to wrap host_no.  Increasing
the number of host numbers available to 32-bit from 16-bit allows the
problem to be evaded for another hundred years.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 include/scsi/scsi_host.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index a594bac4a77..d3b1e06fb14 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -547,7 +547,7 @@ struct Scsi_Host {
 	unsigned int host_failed;	   /* commands that failed. */
 	unsigned int host_eh_scheduled;    /* EH scheduled without command */
     
-	unsigned short host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
+	unsigned int host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
 	int resetting; /* if set, it means that last_reset is a valid value */
 	unsigned long last_reset;
 
-- 
cgit v1.2.3


From 765cbc6dad16b87724803e359d6be792ddf08614 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 17 Jul 2008 16:52:51 -0700
Subject: [SCSI] scsi_dh: Implement common device table handling

Instead of having each and every driver implement its own
device table scanning code we should rather implement a common
routine and scan the device tables there.
This allows us also to implement a general notifier chain
callback for all device handler instead for one per handler.

[sekharan: Fix rejections caused by conflicting bug fix]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/scsi_dh.c       | 202 +++++++++++++++++++++++-----
 drivers/scsi/device_handler/scsi_dh_emc.c   | 109 ++++++---------
 drivers/scsi/device_handler/scsi_dh_hp_sw.c |  86 +++++-------
 drivers/scsi/device_handler/scsi_dh_rdac.c  | 109 ++++++---------
 include/scsi/scsi_device.h                  |   9 +-
 5 files changed, 296 insertions(+), 219 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index ab6c21cd968..3f798171ed6 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -33,7 +33,7 @@ static struct scsi_device_handler *get_device_handler(const char *name)
 
 	spin_lock(&list_lock);
 	list_for_each_entry(tmp, &scsi_dh_list, list) {
-		if (!strcmp(tmp->name, name)) {
+		if (!strncmp(tmp->name, name, strlen(tmp->name))) {
 			found = tmp;
 			break;
 		}
@@ -42,50 +42,172 @@ static struct scsi_device_handler *get_device_handler(const char *name)
 	return found;
 }
 
-static int scsi_dh_notifier_add(struct device *dev, void *data)
+static int device_handler_match(struct scsi_device_handler *tmp,
+				struct scsi_device *sdev)
 {
-	struct scsi_device_handler *scsi_dh = data;
+	int i;
+
+	for(i = 0; tmp->devlist[i].vendor; i++) {
+		if (!strncmp(sdev->vendor, tmp->devlist[i].vendor,
+			     strlen(tmp->devlist[i].vendor)) &&
+		    !strncmp(sdev->model, tmp->devlist[i].model,
+			     strlen(tmp->devlist[i].model))) {
+			return 1;
+		}
+	}
 
-	scsi_dh->nb.notifier_call(&scsi_dh->nb, BUS_NOTIFY_ADD_DEVICE, dev);
 	return 0;
 }
 
 /*
- * scsi_register_device_handler - register a device handler personality
- *      module.
- * @scsi_dh - device handler to be registered.
+ * scsi_dh_handler_attach - Attach a device handler to a device
+ * @sdev - SCSI device the device handler should attach to
+ * @scsi_dh - The device handler to attach
+ */
+static int scsi_dh_handler_attach(struct scsi_device *sdev,
+				  struct scsi_device_handler *scsi_dh)
+{
+	int err = 0;
+
+	if (sdev->scsi_dh_data) {
+		if (sdev->scsi_dh_data->scsi_dh != scsi_dh)
+			err = -EBUSY;
+	} else if (scsi_dh->attach)
+		err = scsi_dh->attach(sdev);
+
+	return err;
+}
+
+/*
+ * scsi_dh_handler_detach - Detach a device handler from a device
+ * @sdev - SCSI device the device handler should be detached from
+ * @scsi_dh - Device handler to be detached
  *
- * Returns 0 on success, -EBUSY if handler already registered.
+ * Detach from a device handler. If a device handler is specified,
+ * only detach if the currently attached handler is equal to it.
  */
-int scsi_register_device_handler(struct scsi_device_handler *scsi_dh)
+static void scsi_dh_handler_detach(struct scsi_device *sdev,
+				   struct scsi_device_handler *scsi_dh)
 {
-	int ret = -EBUSY;
-	struct scsi_device_handler *tmp;
+	if (!sdev->scsi_dh_data)
+		return;
 
-	tmp = get_device_handler(scsi_dh->name);
-	if (tmp)
-		goto done;
+	if (scsi_dh && scsi_dh != sdev->scsi_dh_data->scsi_dh)
+		return;
 
-	ret = bus_register_notifier(&scsi_bus_type, &scsi_dh->nb);
+	if (!scsi_dh)
+		scsi_dh = sdev->scsi_dh_data->scsi_dh;
+
+	if (scsi_dh && scsi_dh->detach)
+		scsi_dh->detach(sdev);
+}
+
+/*
+ * scsi_dh_notifier - notifier chain callback
+ */
+static int scsi_dh_notifier(struct notifier_block *nb,
+			    unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct scsi_device *sdev;
+	int err = 0;
+	struct scsi_device_handler *tmp, *devinfo = NULL;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
 
-	bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh, scsi_dh_notifier_add);
 	spin_lock(&list_lock);
-	list_add(&scsi_dh->list, &scsi_dh_list);
+	list_for_each_entry(tmp, &scsi_dh_list, list) {
+		if (device_handler_match(tmp, sdev)) {
+			devinfo = tmp;
+			break;
+		}
+	}
 	spin_unlock(&list_lock);
 
-done:
-	return ret;
+	if (!devinfo)
+		goto out;
+
+	if (action == BUS_NOTIFY_ADD_DEVICE) {
+		err = scsi_dh_handler_attach(sdev, devinfo);
+	} else if (action == BUS_NOTIFY_DEL_DEVICE) {
+		scsi_dh_handler_detach(sdev, NULL);
+	}
+out:
+	return err;
 }
-EXPORT_SYMBOL_GPL(scsi_register_device_handler);
 
+/*
+ * scsi_dh_notifier_add - Callback for scsi_register_device_handler
+ */
+static int scsi_dh_notifier_add(struct device *dev, void *data)
+{
+	struct scsi_device_handler *scsi_dh = data;
+	struct scsi_device *sdev;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	if (!get_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+
+	if (device_handler_match(scsi_dh, sdev))
+		scsi_dh_handler_attach(sdev, scsi_dh);
+
+	put_device(dev);
+
+	return 0;
+}
+
+/*
+ * scsi_dh_notifier_remove - Callback for scsi_unregister_device_handler
+ */
 static int scsi_dh_notifier_remove(struct device *dev, void *data)
 {
 	struct scsi_device_handler *scsi_dh = data;
+	struct scsi_device *sdev;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	if (!get_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+
+	scsi_dh_handler_detach(sdev, scsi_dh);
+
+	put_device(dev);
 
-	scsi_dh->nb.notifier_call(&scsi_dh->nb, BUS_NOTIFY_DEL_DEVICE, dev);
 	return 0;
 }
 
+/*
+ * scsi_register_device_handler - register a device handler personality
+ *      module.
+ * @scsi_dh - device handler to be registered.
+ *
+ * Returns 0 on success, -EBUSY if handler already registered.
+ */
+int scsi_register_device_handler(struct scsi_device_handler *scsi_dh)
+{
+	if (get_device_handler(scsi_dh->name))
+		return -EBUSY;
+
+	spin_lock(&list_lock);
+	list_add(&scsi_dh->list, &scsi_dh_list);
+	spin_unlock(&list_lock);
+	bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh, scsi_dh_notifier_add);
+	printk(KERN_INFO "%s: device handler registered\n", scsi_dh->name);
+
+	return SCSI_DH_OK;
+}
+EXPORT_SYMBOL_GPL(scsi_register_device_handler);
+
 /*
  * scsi_unregister_device_handler - register a device handler personality
  *      module.
@@ -95,23 +217,18 @@ static int scsi_dh_notifier_remove(struct device *dev, void *data)
  */
 int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh)
 {
-	int ret = -ENODEV;
-	struct scsi_device_handler *tmp;
-
-	tmp = get_device_handler(scsi_dh->name);
-	if (!tmp)
-		goto done;
-
-	ret = bus_unregister_notifier(&scsi_bus_type, &scsi_dh->nb);
+	if (!get_device_handler(scsi_dh->name))
+		return -ENODEV;
 
 	bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh,
-					scsi_dh_notifier_remove);
+			 scsi_dh_notifier_remove);
+
 	spin_lock(&list_lock);
 	list_del(&scsi_dh->list);
 	spin_unlock(&list_lock);
+	printk(KERN_INFO "%s: device handler unregistered\n", scsi_dh->name);
 
-done:
-	return ret;
+	return SCSI_DH_OK;
 }
 EXPORT_SYMBOL_GPL(scsi_unregister_device_handler);
 
@@ -157,6 +274,27 @@ int scsi_dh_handler_exist(const char *name)
 }
 EXPORT_SYMBOL_GPL(scsi_dh_handler_exist);
 
+static struct notifier_block scsi_dh_nb = {
+	.notifier_call = scsi_dh_notifier
+};
+
+static int __init scsi_dh_init(void)
+{
+	int r;
+
+	r = bus_register_notifier(&scsi_bus_type, &scsi_dh_nb);
+
+	return r;
+}
+
+static void __exit scsi_dh_exit(void)
+{
+	bus_unregister_notifier(&scsi_bus_type, &scsi_dh_nb);
+}
+
+module_init(scsi_dh_init);
+module_exit(scsi_dh_exit);
+
 MODULE_DESCRIPTION("SCSI device handler");
 MODULE_AUTHOR("Chandra Seetharaman <sekharan@us.ibm.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index f2467e936e5..bf0a389c52d 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -238,12 +238,12 @@ done:
 }
 
 /*
-* Get block request for REQ_BLOCK_PC command issued to path.  Currently
-* limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
-*
-* Uses data and sense buffers in hardware handler context structure and
-* assumes serial servicing of commands, both issuance and completion.
-*/
+ * Get block request for REQ_BLOCK_PC command issued to path.  Currently
+ * limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
+ *
+ * Uses data and sense buffers in hardware handler context structure and
+ * assumes serial servicing of commands, both issuance and completion.
+ */
 static struct request *get_req(struct scsi_device *sdev, int cmd)
 {
 	struct clariion_dh_data *csdev = get_clariion_data(sdev);
@@ -390,21 +390,21 @@ static int clariion_check_sense(struct scsi_device *sdev,
 	return SUCCESS;
 }
 
-static const struct {
-	char *vendor;
-	char *model;
-} clariion_dev_list[] = {
+const struct scsi_dh_devlist clariion_dev_list[] = {
 	{"DGC", "RAID"},
 	{"DGC", "DISK"},
 	{NULL, NULL},
 };
 
-static int clariion_bus_notify(struct notifier_block *, unsigned long, void *);
+static int clariion_bus_attach(struct scsi_device *sdev);
+static void clariion_bus_detach(struct scsi_device *sdev);
 
 static struct scsi_device_handler clariion_dh = {
 	.name		= CLARIION_NAME,
 	.module		= THIS_MODULE,
-	.nb.notifier_call = clariion_bus_notify,
+	.devlist	= clariion_dev_list,
+	.attach		= clariion_bus_attach,
+	.detach		= clariion_bus_detach,
 	.check_sense	= clariion_check_sense,
 	.activate	= clariion_activate,
 };
@@ -412,73 +412,50 @@ static struct scsi_device_handler clariion_dh = {
 /*
  * TODO: need some interface so we can set trespass values
  */
-static int clariion_bus_notify(struct notifier_block *nb,
-				unsigned long action, void *data)
+static int clariion_bus_attach(struct scsi_device *sdev)
 {
-	struct device *dev = data;
-	struct scsi_device *sdev;
 	struct scsi_dh_data *scsi_dh_data;
 	struct clariion_dh_data *h;
-	int i, found = 0;
 	unsigned long flags;
 
-	if (!scsi_is_sdev_device(dev))
-		return 0;
-
-	sdev = to_scsi_device(dev);
-
-	if (action == BUS_NOTIFY_ADD_DEVICE) {
-		for (i = 0; clariion_dev_list[i].vendor; i++) {
-			if (!strncmp(sdev->vendor, clariion_dev_list[i].vendor,
-				     strlen(clariion_dev_list[i].vendor)) &&
-			    !strncmp(sdev->model, clariion_dev_list[i].model,
-				     strlen(clariion_dev_list[i].model))) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			goto out;
-
-		scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
-				+ sizeof(*h) , GFP_KERNEL);
-		if (!scsi_dh_data) {
-			sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
-				    CLARIION_NAME);
-			goto out;
-		}
+	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+			       + sizeof(*h) , GFP_KERNEL);
+	if (!scsi_dh_data) {
+		sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
+			    CLARIION_NAME);
+		return -ENOMEM;
+	}
 
-		scsi_dh_data->scsi_dh = &clariion_dh;
-		h = (struct clariion_dh_data *) scsi_dh_data->buf;
-		h->default_sp = CLARIION_UNBOUND_LU;
-		h->current_sp = CLARIION_UNBOUND_LU;
+	scsi_dh_data->scsi_dh = &clariion_dh;
+	h = (struct clariion_dh_data *) scsi_dh_data->buf;
+	h->default_sp = CLARIION_UNBOUND_LU;
+	h->current_sp = CLARIION_UNBOUND_LU;
 
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		sdev->scsi_dh_data = scsi_dh_data;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	sdev->scsi_dh_data = scsi_dh_data;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 
-		sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", CLARIION_NAME);
-		try_module_get(THIS_MODULE);
+	sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", CLARIION_NAME);
+	try_module_get(THIS_MODULE);
 
-	} else if (action == BUS_NOTIFY_DEL_DEVICE) {
-		if (sdev->scsi_dh_data == NULL ||
-				sdev->scsi_dh_data->scsi_dh != &clariion_dh)
-			goto out;
+	return 0;
+}
 
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		scsi_dh_data = sdev->scsi_dh_data;
-		sdev->scsi_dh_data = NULL;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+static void clariion_bus_detach(struct scsi_device *sdev)
+{
+	struct scsi_dh_data *scsi_dh_data;
+	unsigned long flags;
 
-		sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n",
-			    CLARIION_NAME);
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	scsi_dh_data = sdev->scsi_dh_data;
+	sdev->scsi_dh_data = NULL;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 
-		kfree(scsi_dh_data);
-		module_put(THIS_MODULE);
-	}
+	sdev_printk(KERN_NOTICE, sdev, "Detached %s.\n",
+		    CLARIION_NAME);
 
-out:
-	return 0;
+	kfree(scsi_dh_data);
+	module_put(THIS_MODULE);
 }
 
 static int __init clariion_init(void)
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index ae6be87d6a8..78259bc5dfc 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -108,85 +108,63 @@ done:
 	return ret;
 }
 
-static const struct {
-	char *vendor;
-	char *model;
-} hp_sw_dh_data_list[] = {
+const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
 	{"COMPAQ", "MSA"},
 	{"HP", "HSV"},
 	{"DEC", "HSG80"},
 	{NULL, NULL},
 };
 
-static int hp_sw_bus_notify(struct notifier_block *, unsigned long, void *);
+static int hp_sw_bus_attach(struct scsi_device *sdev);
+static void hp_sw_bus_detach(struct scsi_device *sdev);
 
 static struct scsi_device_handler hp_sw_dh = {
 	.name		= HP_SW_NAME,
 	.module		= THIS_MODULE,
-	.nb.notifier_call = hp_sw_bus_notify,
+	.devlist	= hp_sw_dh_data_list,
+	.attach		= hp_sw_bus_attach,
+	.detach		= hp_sw_bus_detach,
 	.activate	= hp_sw_activate,
 };
 
-static int hp_sw_bus_notify(struct notifier_block *nb,
-			    unsigned long action, void *data)
+static int hp_sw_bus_attach(struct scsi_device *sdev)
 {
-	struct device *dev = data;
-	struct scsi_device *sdev;
 	struct scsi_dh_data *scsi_dh_data;
-	int i, found = 0;
 	unsigned long flags;
 
-	if (!scsi_is_sdev_device(dev))
+	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+			       + sizeof(struct hp_sw_dh_data) , GFP_KERNEL);
+	if (!scsi_dh_data) {
+		sdev_printk(KERN_ERR, sdev, "Attach Failed %s.\n",
+			    HP_SW_NAME);
 		return 0;
+	}
 
-	sdev = to_scsi_device(dev);
-
-	if (action == BUS_NOTIFY_ADD_DEVICE) {
-		for (i = 0; hp_sw_dh_data_list[i].vendor; i++) {
-			if (!strncmp(sdev->vendor, hp_sw_dh_data_list[i].vendor,
-				     strlen(hp_sw_dh_data_list[i].vendor)) &&
-			    !strncmp(sdev->model, hp_sw_dh_data_list[i].model,
-				     strlen(hp_sw_dh_data_list[i].model))) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			goto out;
-
-		scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
-				+ sizeof(struct hp_sw_dh_data) , GFP_KERNEL);
-		if (!scsi_dh_data) {
-			sdev_printk(KERN_ERR, sdev, "Attach Failed %s.\n",
-				    HP_SW_NAME);
-			goto out;
-		}
+	scsi_dh_data->scsi_dh = &hp_sw_dh;
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	sdev->scsi_dh_data = scsi_dh_data;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+	try_module_get(THIS_MODULE);
 
-		scsi_dh_data->scsi_dh = &hp_sw_dh;
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		sdev->scsi_dh_data = scsi_dh_data;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-		try_module_get(THIS_MODULE);
+	sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", HP_SW_NAME);
 
-		sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", HP_SW_NAME);
-	} else if (action == BUS_NOTIFY_DEL_DEVICE) {
-		if (sdev->scsi_dh_data == NULL ||
-				sdev->scsi_dh_data->scsi_dh != &hp_sw_dh)
-			goto out;
+	return 0;
+}
 
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		scsi_dh_data = sdev->scsi_dh_data;
-		sdev->scsi_dh_data = NULL;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-		module_put(THIS_MODULE);
+static void hp_sw_bus_detach( struct scsi_device *sdev )
+{
+	struct scsi_dh_data *scsi_dh_data;
+	unsigned long flags;
 
-		sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", HP_SW_NAME);
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	scsi_dh_data = sdev->scsi_dh_data;
+	sdev->scsi_dh_data = NULL;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+	module_put(THIS_MODULE);
 
-		kfree(scsi_dh_data);
-	}
+	sdev_printk(KERN_NOTICE, sdev, "Detached %s\n", HP_SW_NAME);
 
-out:
-	return 0;
+	kfree(scsi_dh_data);
 }
 
 static int __init hp_sw_init(void)
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index fdf34b0ec6e..0e25a6e9c82 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -569,10 +569,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 	return SCSI_RETURN_NOT_HANDLED;
 }
 
-static const struct {
-	char *vendor;
-	char *model;
-} rdac_dev_list[] = {
+const struct scsi_dh_devlist rdac_dev_list[] = {
 	{"IBM", "1722"},
 	{"IBM", "1724"},
 	{"IBM", "1726"},
@@ -590,89 +587,69 @@ static const struct {
 	{NULL, NULL},
 };
 
-static int rdac_bus_notify(struct notifier_block *, unsigned long, void *);
+static int rdac_bus_attach(struct scsi_device *sdev);
+static void rdac_bus_detach(struct scsi_device *sdev);
 
 static struct scsi_device_handler rdac_dh = {
 	.name = RDAC_NAME,
 	.module = THIS_MODULE,
-	.nb.notifier_call = rdac_bus_notify,
+	.devlist = rdac_dev_list,
 	.prep_fn = rdac_prep_fn,
 	.check_sense = rdac_check_sense,
+	.attach = rdac_bus_attach,
+	.detach = rdac_bus_detach,
 	.activate = rdac_activate,
 };
 
-/*
- * TODO: need some interface so we can set trespass values
- */
-static int rdac_bus_notify(struct notifier_block *nb,
-			    unsigned long action, void *data)
+static int rdac_bus_attach(struct scsi_device *sdev)
 {
-	struct device *dev = data;
-	struct scsi_device *sdev;
 	struct scsi_dh_data *scsi_dh_data;
 	struct rdac_dh_data *h;
-	int i, found = 0;
 	unsigned long flags;
 
-	if (!scsi_is_sdev_device(dev))
+	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+			       + sizeof(*h) , GFP_KERNEL);
+	if (!scsi_dh_data) {
+		sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
+			    RDAC_NAME);
 		return 0;
+	}
 
-	sdev = to_scsi_device(dev);
-
-	if (action == BUS_NOTIFY_ADD_DEVICE) {
-		for (i = 0; rdac_dev_list[i].vendor; i++) {
-			if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor,
-				     strlen(rdac_dev_list[i].vendor)) &&
-			    !strncmp(sdev->model, rdac_dev_list[i].model,
-				     strlen(rdac_dev_list[i].model))) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found)
-			goto out;
-
-		scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
-				+ sizeof(*h) , GFP_KERNEL);
-		if (!scsi_dh_data) {
-			sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
-				    RDAC_NAME);
-			goto out;
-		}
+	scsi_dh_data->scsi_dh = &rdac_dh;
+	h = (struct rdac_dh_data *) scsi_dh_data->buf;
+	h->lun = UNINITIALIZED_LUN;
+	h->state = RDAC_STATE_ACTIVE;
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	sdev->scsi_dh_data = scsi_dh_data;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+	try_module_get(THIS_MODULE);
 
-		scsi_dh_data->scsi_dh = &rdac_dh;
-		h = (struct rdac_dh_data *) scsi_dh_data->buf;
-		h->lun = UNINITIALIZED_LUN;
-		h->state = RDAC_STATE_ACTIVE;
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		sdev->scsi_dh_data = scsi_dh_data;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-		try_module_get(THIS_MODULE);
-
-		sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", RDAC_NAME);
-
-	} else if (action == BUS_NOTIFY_DEL_DEVICE) {
-		if (sdev->scsi_dh_data == NULL ||
-				sdev->scsi_dh_data->scsi_dh != &rdac_dh)
-			goto out;
-
-		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
-		scsi_dh_data = sdev->scsi_dh_data;
-		sdev->scsi_dh_data = NULL;
-		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-
-		h = (struct rdac_dh_data *) scsi_dh_data->buf;
-		if (h->ctlr)
-			kref_put(&h->ctlr->kref, release_controller);
-		kfree(scsi_dh_data);
-		module_put(THIS_MODULE);
-		sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n", RDAC_NAME);
-	}
+	sdev_printk(KERN_NOTICE, sdev, "Attached %s\n", RDAC_NAME);
 
-out:
 	return 0;
 }
 
+static void rdac_bus_detach( struct scsi_device *sdev )
+{
+	struct scsi_dh_data *scsi_dh_data;
+	struct rdac_dh_data *h;
+	unsigned long flags;
+
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	scsi_dh_data = sdev->scsi_dh_data;
+	sdev->scsi_dh_data = NULL;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+	h = (struct rdac_dh_data *) scsi_dh_data->buf;
+	if (h->ctlr)
+		kref_put(&h->ctlr->kref, release_controller);
+	kfree(scsi_dh_data);
+	module_put(THIS_MODULE);
+	sdev_printk(KERN_NOTICE, sdev, "Detached %s\n", RDAC_NAME);
+}
+
+
+
 static int __init rdac_init(void)
 {
 	int r;
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 6467f78b191..4deb9349eeb 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -167,15 +167,22 @@ struct scsi_device {
 	unsigned long		sdev_data[0];
 } __attribute__((aligned(sizeof(unsigned long))));
 
+struct scsi_dh_devlist {
+	char *vendor;
+	char *model;
+};
+
 struct scsi_device_handler {
 	/* Used by the infrastructure */
 	struct list_head list; /* list of scsi_device_handlers */
-	struct notifier_block nb;
 
 	/* Filled by the hardware handler */
 	struct module *module;
 	const char *name;
+	const struct scsi_dh_devlist *devlist;
 	int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
+	int (*attach)(struct scsi_device *);
+	void (*detach)(struct scsi_device *);
 	int (*activate)(struct scsi_device *);
 	int (*prep_fn)(struct scsi_device *, struct request *);
 };
-- 
cgit v1.2.3


From 4c05ae52fcb0e27a2ee4a16d1f31f8c547fd4886 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 17 Jul 2008 16:52:57 -0700
Subject: [SCSI] scsi_dh: Add 'dh_state' sysfs attribute

Implement a 'dh_state' sdev attribute for dynamic device handler
manipulation. A read on the attribute will return the name of
the currently attached device handler or 'detached' if no handler
is attached.
The attribute allows the following strings to be written:
- The name of the device handler to be attached if the state is
  'detached'.
- 'activate' to trigger path activation if a device handler
  is attached.
- 'detach' to detach the currently attached device handler.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/scsi_dh.c | 103 +++++++++++++++++++++++++++++++++-
 1 file changed, 102 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index 3f798171ed6..e90df9dd3e6 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -84,7 +84,7 @@ static int scsi_dh_handler_attach(struct scsi_device *sdev,
  * @scsi_dh - Device handler to be detached
  *
  * Detach from a device handler. If a device handler is specified,
- * only detach if the currently attached handler is equal to it.
+ * only detach if the currently attached handler matches @scsi_dh.
  */
 static void scsi_dh_handler_detach(struct scsi_device *sdev,
 				   struct scsi_device_handler *scsi_dh)
@@ -102,6 +102,98 @@ static void scsi_dh_handler_detach(struct scsi_device *sdev,
 		scsi_dh->detach(sdev);
 }
 
+/*
+ * Functions for sysfs attribute 'dh_state'
+ */
+static ssize_t
+store_dh_state(struct device *dev, struct device_attribute *attr,
+	       const char *buf, size_t count)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct scsi_device_handler *scsi_dh;
+	int err = -EINVAL;
+
+	if (!sdev->scsi_dh_data) {
+		/*
+		 * Attach to a device handler
+		 */
+		if (!(scsi_dh = get_device_handler(buf)))
+			return err;
+		err = scsi_dh_handler_attach(sdev, scsi_dh);
+	} else {
+		scsi_dh = sdev->scsi_dh_data->scsi_dh;
+		if (!strncmp(buf, "detach", 6)) {
+			/*
+			 * Detach from a device handler
+			 */
+			scsi_dh_handler_detach(sdev, scsi_dh);
+			err = 0;
+		} else if (!strncmp(buf, "activate", 8)) {
+			/*
+			 * Activate a device handler
+			 */
+			if (scsi_dh->activate)
+				err = scsi_dh->activate(sdev);
+			else
+				err = 0;
+		}
+	}
+
+	return err<0?err:count;
+}
+
+static ssize_t
+show_dh_state(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	if (!sdev->scsi_dh_data)
+		return snprintf(buf, 20, "detached\n");
+
+	return snprintf(buf, 20, "%s\n", sdev->scsi_dh_data->scsi_dh->name);
+}
+
+static struct device_attribute scsi_dh_state_attr =
+	__ATTR(dh_state, S_IRUGO | S_IWUSR, show_dh_state,
+	       store_dh_state);
+
+/*
+ * scsi_dh_sysfs_attr_add - Callback for scsi_init_dh
+ */
+static int scsi_dh_sysfs_attr_add(struct device *dev, void *data)
+{
+	struct scsi_device *sdev;
+	int err;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+
+	err = device_create_file(&sdev->sdev_gendev,
+				 &scsi_dh_state_attr);
+
+	return 0;
+}
+
+/*
+ * scsi_dh_sysfs_attr_remove - Callback for scsi_exit_dh
+ */
+static int scsi_dh_sysfs_attr_remove(struct device *dev, void *data)
+{
+	struct scsi_device *sdev;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+
+	device_remove_file(&sdev->sdev_gendev,
+			   &scsi_dh_state_attr);
+
+	return 0;
+}
+
 /*
  * scsi_dh_notifier - notifier chain callback
  */
@@ -132,7 +224,10 @@ static int scsi_dh_notifier(struct notifier_block *nb,
 
 	if (action == BUS_NOTIFY_ADD_DEVICE) {
 		err = scsi_dh_handler_attach(sdev, devinfo);
+		if (!err)
+			err = device_create_file(dev, &scsi_dh_state_attr);
 	} else if (action == BUS_NOTIFY_DEL_DEVICE) {
+		device_remove_file(dev, &scsi_dh_state_attr);
 		scsi_dh_handler_detach(sdev, NULL);
 	}
 out:
@@ -284,11 +379,17 @@ static int __init scsi_dh_init(void)
 
 	r = bus_register_notifier(&scsi_bus_type, &scsi_dh_nb);
 
+	if (!r)
+		bus_for_each_dev(&scsi_bus_type, NULL, NULL,
+				 scsi_dh_sysfs_attr_add);
+
 	return r;
 }
 
 static void __exit scsi_dh_exit(void)
 {
+	bus_for_each_dev(&scsi_bus_type, NULL, NULL,
+			 scsi_dh_sysfs_attr_remove);
 	bus_unregister_notifier(&scsi_bus_type, &scsi_dh_nb);
 }
 
-- 
cgit v1.2.3


From b6ff1b14cdf4b4cb5403f3af2c3272f7e609a241 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 17 Jul 2008 16:53:03 -0700
Subject: [SCSI] scsi_dh: Update EMC handler

This patch converts the EMC device handler to use a proper
state machine. We now also parse the extended INQUIRY
information to determine if long trespass commands are
supported. And we're now using the long trespass command
correctly. And finally there's now an check at init time
to refuse to attach to devices not supporting EMC-specific
VPD pages.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/scsi_dh_emc.c | 547 ++++++++++++++++++++----------
 include/scsi/scsi_dh.h                    |   1 +
 2 files changed, 373 insertions(+), 175 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index bf0a389c52d..aa46b131b20 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -25,28 +25,31 @@
 #include <scsi/scsi_dh.h>
 #include <scsi/scsi_device.h>
 
-#define CLARIION_NAME			"emc_clariion"
+#define CLARIION_NAME			"emc"
 
 #define CLARIION_TRESPASS_PAGE		0x22
-#define CLARIION_BUFFER_SIZE		0x80
+#define CLARIION_BUFFER_SIZE		0xFC
 #define CLARIION_TIMEOUT		(60 * HZ)
 #define CLARIION_RETRIES		3
 #define CLARIION_UNBOUND_LU		-1
+#define CLARIION_SP_A			0
+#define CLARIION_SP_B			1
 
-static unsigned char long_trespass[] = {
-	0, 0, 0, 0,
-	CLARIION_TRESPASS_PAGE,	/* Page code */
-	0x09,			/* Page length - 2 */
-	0x81,			/* Trespass code + Honor reservation bit */
-	0xff, 0xff,		/* Trespass target */
-	0, 0, 0, 0, 0, 0	/* Reserved bytes / unknown */
-};
+/* Flags */
+#define CLARIION_SHORT_TRESPASS		1
+#define CLARIION_HONOR_RESERVATIONS	2
 
-static unsigned char long_trespass_hr[] = {
-	0, 0, 0, 0,
+/* LUN states */
+#define CLARIION_LUN_UNINITIALIZED	-1
+#define CLARIION_LUN_UNBOUND		0
+#define CLARIION_LUN_BOUND		1
+#define CLARIION_LUN_OWNED		2
+
+static unsigned char long_trespass[] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
 	CLARIION_TRESPASS_PAGE,	/* Page code */
 	0x09,			/* Page length - 2 */
-	0x01,			/* Trespass code + Honor reservation bit */
+	0x01,			/* Trespass code */
 	0xff, 0xff,		/* Trespass target */
 	0, 0, 0, 0, 0, 0	/* Reserved bytes / unknown */
 };
@@ -55,39 +58,56 @@ static unsigned char short_trespass[] = {
 	0, 0, 0, 0,
 	CLARIION_TRESPASS_PAGE,	/* Page code */
 	0x02,			/* Page length - 2 */
-	0x81,			/* Trespass code + Honor reservation bit */
+	0x01,			/* Trespass code */
 	0xff,			/* Trespass target */
 };
 
-static unsigned char short_trespass_hr[] = {
-	0, 0, 0, 0,
-	CLARIION_TRESPASS_PAGE,	/* Page code */
-	0x02,			/* Page length - 2 */
-	0x01,			/* Trespass code + Honor reservation bit */
-	0xff,			/* Trespass target */
+static const char * lun_state[] =
+{
+    "not bound",
+    "bound",
+    "owned",
 };
 
 struct clariion_dh_data {
 	/*
+	 * Flags:
+	 *  CLARIION_SHORT_TRESPASS
 	 * Use short trespass command (FC-series) or the long version
 	 * (default for AX/CX CLARiiON arrays).
-	 */
-	unsigned short_trespass;
-	/*
+	 *
+	 *  CLARIION_HONOR_RESERVATIONS
 	 * Whether or not (default) to honor SCSI reservations when
 	 * initiating a switch-over.
 	 */
-	unsigned hr;
-	/* I/O buffer for both MODE_SELECT and INQUIRY commands. */
+	unsigned flags;
+	/*
+	 * I/O buffer for both MODE_SELECT and INQUIRY commands.
+	 */
 	char buffer[CLARIION_BUFFER_SIZE];
 	/*
 	 * SCSI sense buffer for commands -- assumes serial issuance
 	 * and completion sequence of all commands for same multipath.
 	 */
 	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
-	/* which SP (A=0,B=1,UNBOUND=-1) is dflt SP for path's mapped dev */
+	unsigned int senselen;
+	/*
+	 * LUN state
+	 */
+	int lun_state;
+	/*
+	 * SP Port number
+	 */
+	int port;
+	/*
+	 * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
+	 * path's mapped LUN
+	 */
 	int default_sp;
-	/* which SP (A=0,B=1,UNBOUND=-1) is active for path's mapped dev */
+	/*
+	 * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
+	 * path's mapped LUN
+	 */
 	int current_sp;
 };
 
@@ -102,19 +122,16 @@ static inline struct clariion_dh_data
 /*
  * Parse MODE_SELECT cmd reply.
  */
-static int trespass_endio(struct scsi_device *sdev, int result)
+static int trespass_endio(struct scsi_device *sdev, char *sense)
 {
-	int err = SCSI_DH_OK;
+	int err = SCSI_DH_IO;
 	struct scsi_sense_hdr sshdr;
-	struct clariion_dh_data *csdev = get_clariion_data(sdev);
-	char *sense = csdev->sense;
 
-	if (status_byte(result) == CHECK_CONDITION &&
-	    scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
-		sdev_printk(KERN_ERR, sdev, "Found valid sense data 0x%2x, "
+	if (!scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr)) {
+		sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
 			    "0x%2x, 0x%2x while sending CLARiiON trespass "
-			    "command.\n", sshdr.sense_key, sshdr.asc,
-			     sshdr.ascq);
+			    "command.\n", CLARIION_NAME, sshdr.sense_key,
+			    sshdr.asc, sshdr.ascq);
 
 		if ((sshdr.sense_key == 0x05) && (sshdr.asc == 0x04) &&
 		     (sshdr.ascq == 0x00)) {
@@ -122,9 +139,9 @@ static int trespass_endio(struct scsi_device *sdev, int result)
 			 * Array based copy in progress -- do not send
 			 * mode_select or copy will be aborted mid-stream.
 			 */
-			sdev_printk(KERN_INFO, sdev, "Array Based Copy in "
+			sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
 				    "progress while sending CLARiiON trespass "
-				    "command.\n");
+				    "command.\n", CLARIION_NAME);
 			err = SCSI_DH_DEV_TEMP_BUSY;
 		} else if ((sshdr.sense_key == 0x02) && (sshdr.asc == 0x04) &&
 			    (sshdr.ascq == 0x03)) {
@@ -132,109 +149,113 @@ static int trespass_endio(struct scsi_device *sdev, int result)
 			 * LUN Not Ready - Manual Intervention Required
 			 * indicates in-progress ucode upgrade (NDU).
 			 */
-			sdev_printk(KERN_INFO, sdev, "Detected in-progress "
+			sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
 				    "ucode upgrade NDU operation while sending "
-				    "CLARiiON trespass command.\n");
+				    "CLARiiON trespass command.\n", CLARIION_NAME);
 			err = SCSI_DH_DEV_TEMP_BUSY;
 		} else
 			err = SCSI_DH_DEV_FAILED;
-	} else if (result) {
-		sdev_printk(KERN_ERR, sdev, "Error 0x%x while sending "
-			    "CLARiiON trespass command.\n", result);
-		err = SCSI_DH_IO;
+	} else {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: failed to send MODE SELECT, no sense available\n",
+			    CLARIION_NAME);
 	}
-
 	return err;
 }
 
-static int parse_sp_info_reply(struct scsi_device *sdev, int result,
-		int *default_sp, int *current_sp, int *new_current_sp)
+static int parse_sp_info_reply(struct scsi_device *sdev,
+			       struct clariion_dh_data *csdev)
 {
 	int err = SCSI_DH_OK;
-	struct clariion_dh_data *csdev = get_clariion_data(sdev);
-
-	if (result == 0) {
-		/* check for in-progress ucode upgrade (NDU) */
-		if (csdev->buffer[48] != 0) {
-			sdev_printk(KERN_NOTICE, sdev, "Detected in-progress "
-			       "ucode upgrade NDU operation while finding "
-			       "current active SP.");
-			err = SCSI_DH_DEV_TEMP_BUSY;
-		} else {
-			*default_sp = csdev->buffer[5];
-
-			if (csdev->buffer[4] == 2)
-				/* SP for path is current */
-				*current_sp = csdev->buffer[8];
-			else {
-				if (csdev->buffer[4] == 1)
-					/* SP for this path is NOT current */
-					if (csdev->buffer[8] == 0)
-						*current_sp = 1;
-					else
-						*current_sp = 0;
-				else
-					/* unbound LU or LUNZ */
-					*current_sp = CLARIION_UNBOUND_LU;
-			}
-			*new_current_sp =  csdev->buffer[8];
-		}
-	} else {
-		struct scsi_sense_hdr sshdr;
 
-		err = SCSI_DH_IO;
-
-		if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
-							   &sshdr))
-			sdev_printk(KERN_ERR, sdev, "Found valid sense data "
-			      "0x%2x, 0x%2x, 0x%2x while finding current "
-			      "active SP.", sshdr.sense_key, sshdr.asc,
-			      sshdr.ascq);
-		else
-			sdev_printk(KERN_ERR, sdev, "Error 0x%x finding "
-			      "current active SP.", result);
+	/* check for in-progress ucode upgrade (NDU) */
+	if (csdev->buffer[48] != 0) {
+		sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
+			    "ucode upgrade NDU operation while finding "
+			    "current active SP.", CLARIION_NAME);
+		err = SCSI_DH_DEV_TEMP_BUSY;
+		goto out;
+	}
+	if (csdev->buffer[4] < 0 || csdev->buffer[4] > 2) {
+		/* Invalid buffer format */
+		sdev_printk(KERN_NOTICE, sdev,
+			    "%s: invalid VPD page 0xC0 format\n",
+			    CLARIION_NAME);
+		err = SCSI_DH_NOSYS;
+		goto out;
+	}
+	switch (csdev->buffer[28] & 0x0f) {
+	case 6:
+		sdev_printk(KERN_NOTICE, sdev,
+			    "%s: ALUA failover mode detected\n",
+			    CLARIION_NAME);
+		break;
+	case 4:
+		/* Linux failover */
+		break;
+	default:
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid failover mode %d\n",
+			    CLARIION_NAME, csdev->buffer[28] & 0x0f);
+		err = SCSI_DH_NOSYS;
+		goto out;
 	}
 
+	csdev->default_sp = csdev->buffer[5];
+	csdev->lun_state = csdev->buffer[4];
+	csdev->current_sp = csdev->buffer[8];
+	csdev->port = csdev->buffer[7];
+
+out:
 	return err;
 }
 
-static int sp_info_endio(struct scsi_device *sdev, int result,
-					int mode_select_sent, int *done)
+#define emc_default_str "FC (Legacy)"
+
+static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
 {
-	struct clariion_dh_data *csdev = get_clariion_data(sdev);
-	int err_flags, default_sp, current_sp, new_current_sp;
+	unsigned char len = buffer[4] + 5;
+	char *sp_model = NULL;
+	unsigned char sp_len, serial_len;
+
+	if (len < 160) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid information section length %d\n",
+			    CLARIION_NAME, len);
+		/* Check for old FC arrays */
+		if (!strncmp(buffer + 8, "DGC", 3)) {
+			/* Old FC array, not supporting extended information */
+			sp_model = emc_default_str;
+		}
+		goto out;
+	}
 
-	err_flags = parse_sp_info_reply(sdev, result, &default_sp,
-					     &current_sp, &new_current_sp);
+	/*
+	 * Parse extended information for SP model number
+	 */
+	serial_len = buffer[160];
+	if (serial_len == 0 || serial_len + 161 > len) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid array serial number length %d\n",
+			    CLARIION_NAME, serial_len);
+		goto out;
+	}
+	sp_len = buffer[99];
+	if (sp_len == 0 || serial_len + sp_len + 161 > len) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: Invalid model number length %d\n",
+			    CLARIION_NAME, sp_len);
+		goto out;
+	}
+	sp_model = &buffer[serial_len + 161];
+	/* Strip whitespace at the end */
+	while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
+		sp_len--;
 
-	if (err_flags != SCSI_DH_OK)
-		goto done;
+	sp_model[sp_len] = '\0';
 
-	if (mode_select_sent) {
-		csdev->default_sp = default_sp;
-		csdev->current_sp = current_sp;
-	} else {
-		/*
-		 * Issue the actual module_selec request IFF either
-		 * (1) we do not know the identity of the current SP OR
-		 * (2) what we think we know is actually correct.
-		 */
-		if ((current_sp != CLARIION_UNBOUND_LU) &&
-		    (new_current_sp != current_sp)) {
-
-			csdev->default_sp = default_sp;
-			csdev->current_sp = current_sp;
-
-			sdev_printk(KERN_INFO, sdev, "Ignoring path group "
-			       "switch-over command for CLARiiON SP%s since "
-			       " mapped device is already initialized.",
-			       current_sp ? "B" : "A");
-			if (done)
-				*done = 1; /* as good as doing it */
-		}
-	}
-done:
-	return err_flags;
+out:
+	return sp_model;
 }
 
 /*
@@ -244,48 +265,37 @@ done:
  * Uses data and sense buffers in hardware handler context structure and
  * assumes serial servicing of commands, both issuance and completion.
  */
-static struct request *get_req(struct scsi_device *sdev, int cmd)
+static struct request *get_req(struct scsi_device *sdev, int cmd,
+				unsigned char *buffer)
 {
-	struct clariion_dh_data *csdev = get_clariion_data(sdev);
 	struct request *rq;
-	unsigned char *page22;
 	int len = 0;
 
 	rq = blk_get_request(sdev->request_queue,
-			(cmd == MODE_SELECT) ? WRITE : READ, GFP_ATOMIC);
+			(cmd == MODE_SELECT) ? WRITE : READ, GFP_NOIO);
 	if (!rq) {
 		sdev_printk(KERN_INFO, sdev, "get_req: blk_get_request failed");
 		return NULL;
 	}
 
-	memset(&rq->cmd, 0, BLK_MAX_CDB);
+	memset(rq->cmd, 0, BLK_MAX_CDB);
+	rq->cmd_len = COMMAND_SIZE(cmd);
 	rq->cmd[0] = cmd;
-	rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
 
 	switch (cmd) {
 	case MODE_SELECT:
-		if (csdev->short_trespass) {
-			page22 = csdev->hr ? short_trespass_hr : short_trespass;
-			len = sizeof(short_trespass);
-		} else {
-			page22 = csdev->hr ? long_trespass_hr : long_trespass;
-			len = sizeof(long_trespass);
-		}
-		/*
-		 * Can't DMA from kernel BSS -- must copy selected trespass
-		 * command mode page contents to context buffer which is
-		 * allocated by kmalloc.
-		 */
-		BUG_ON((len > CLARIION_BUFFER_SIZE));
-		memcpy(csdev->buffer, page22, len);
+		len = sizeof(short_trespass);
+		rq->cmd_flags |= REQ_RW;
+		rq->cmd[1] = 0x10;
+		break;
+	case MODE_SELECT_10:
+		len = sizeof(long_trespass);
 		rq->cmd_flags |= REQ_RW;
 		rq->cmd[1] = 0x10;
 		break;
 	case INQUIRY:
-		rq->cmd[1] = 0x1;
-		rq->cmd[2] = 0xC0;
 		len = CLARIION_BUFFER_SIZE;
-		memset(csdev->buffer, 0, CLARIION_BUFFER_SIZE);
+		memset(buffer, 0, len);
 		break;
 	default:
 		BUG_ON(1);
@@ -298,47 +308,94 @@ static struct request *get_req(struct scsi_device *sdev, int cmd)
 	rq->timeout = CLARIION_TIMEOUT;
 	rq->retries = CLARIION_RETRIES;
 
-	rq->sense = csdev->sense;
-	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
-	rq->sense_len = 0;
-
-	if (blk_rq_map_kern(sdev->request_queue, rq, csdev->buffer,
-							len, GFP_ATOMIC)) {
-		__blk_put_request(rq->q, rq);
+	if (blk_rq_map_kern(rq->q, rq, buffer, len, GFP_NOIO)) {
+		blk_put_request(rq);
 		return NULL;
 	}
 
 	return rq;
 }
 
-static int send_cmd(struct scsi_device *sdev, int cmd)
+static int send_inquiry_cmd(struct scsi_device *sdev, int page,
+			    struct clariion_dh_data *csdev)
 {
-	struct request *rq = get_req(sdev, cmd);
+	struct request *rq = get_req(sdev, INQUIRY, csdev->buffer);
+	int err;
 
 	if (!rq)
 		return SCSI_DH_RES_TEMP_UNAVAIL;
 
-	return blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+	rq->sense = csdev->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = csdev->senselen = 0;
+
+	rq->cmd[0] = INQUIRY;
+	if (page != 0) {
+		rq->cmd[1] = 1;
+		rq->cmd[2] = page;
+	}
+	err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: failed to send %s INQUIRY: %x\n",
+			    CLARIION_NAME, page?"EVPD":"standard",
+			    rq->errors);
+		csdev->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+
+	blk_put_request(rq);
+
+	return err;
 }
 
-static int clariion_activate(struct scsi_device *sdev)
+static int send_trespass_cmd(struct scsi_device *sdev,
+			    struct clariion_dh_data *csdev)
 {
-	int result, done = 0;
+	struct request *rq;
+	unsigned char *page22;
+	int err, len, cmd;
+
+	if (csdev->flags & CLARIION_SHORT_TRESPASS) {
+		page22 = short_trespass;
+		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+			/* Set Honor Reservations bit */
+			page22[6] |= 0x80;
+		len = sizeof(short_trespass);
+		cmd = MODE_SELECT;
+	} else {
+		page22 = long_trespass;
+		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
+			/* Set Honor Reservations bit */
+			page22[10] |= 0x80;
+		len = sizeof(long_trespass);
+		cmd = MODE_SELECT_10;
+	}
+	BUG_ON((len > CLARIION_BUFFER_SIZE));
+	memcpy(csdev->buffer, page22, len);
 
-	result = send_cmd(sdev, INQUIRY);
-	result = sp_info_endio(sdev, result, 0, &done);
-	if (result || done)
-		goto done;
+	rq = get_req(sdev, cmd, csdev->buffer);
+	if (!rq)
+		return SCSI_DH_RES_TEMP_UNAVAIL;
 
-	result = send_cmd(sdev, MODE_SELECT);
-	result = trespass_endio(sdev, result);
-	if (result)
-		goto done;
+	rq->sense = csdev->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = csdev->senselen = 0;
 
-	result = send_cmd(sdev, INQUIRY);
-	result = sp_info_endio(sdev, result, 1, NULL);
-done:
-	return result;
+	err = blk_execute_rq(sdev->request_queue, NULL, rq, 1);
+	if (err == -EIO) {
+		if (rq->sense_len) {
+			err = trespass_endio(sdev, csdev->sense);
+		} else {
+			sdev_printk(KERN_INFO, sdev,
+				    "%s: failed to send MODE SELECT: %x\n",
+				    CLARIION_NAME, rq->errors);
+		}
+	}
+
+	blk_put_request(rq);
+
+	return err;
 }
 
 static int clariion_check_sense(struct scsi_device *sdev,
@@ -386,13 +443,129 @@ static int clariion_check_sense(struct scsi_device *sdev,
 		break;
 	}
 
-	/* success just means we do not care what scsi-ml does */
-	return SUCCESS;
+	return SCSI_RETURN_NOT_HANDLED;
+}
+
+static int clariion_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+	struct clariion_dh_data *h = get_clariion_data(sdev);
+	int ret = BLKPREP_OK;
+
+	if (h->lun_state != CLARIION_LUN_OWNED) {
+		ret = BLKPREP_KILL;
+		req->cmd_flags |= REQ_QUIET;
+	}
+	return ret;
+
+}
+
+static int clariion_std_inquiry(struct scsi_device *sdev,
+				struct clariion_dh_data *csdev)
+{
+	int err;
+	char *sp_model;
+
+	err = send_inquiry_cmd(sdev, 0, csdev);
+	if (err != SCSI_DH_OK && csdev->senselen) {
+		struct scsi_sense_hdr sshdr;
+
+		if (scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
+					 &sshdr)) {
+			sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
+				    "%02x/%02x/%02x\n", CLARIION_NAME,
+				    sshdr.sense_key, sshdr.asc, sshdr.ascq);
+		}
+		err = SCSI_DH_IO;
+		goto out;
+	}
+
+	sp_model = parse_sp_model(sdev, csdev->buffer);
+	if (!sp_model) {
+		err = SCSI_DH_DEV_UNSUPP;
+		goto out;
+	}
+
+	/*
+	 * FC Series arrays do not support long trespass
+	 */
+	if (!strlen(sp_model) || !strncmp(sp_model, "FC",2))
+		csdev->flags |= CLARIION_SHORT_TRESPASS;
+
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: detected Clariion %s, flags %x\n",
+		    CLARIION_NAME, sp_model, csdev->flags);
+out:
+	return err;
+}
+
+static int clariion_send_inquiry(struct scsi_device *sdev,
+				 struct clariion_dh_data *csdev)
+{
+	int err, retry = CLARIION_RETRIES;
+
+retry:
+	err = send_inquiry_cmd(sdev, 0xC0, csdev);
+	if (err != SCSI_DH_OK && csdev->senselen) {
+		struct scsi_sense_hdr sshdr;
+
+		err = scsi_normalize_sense(csdev->sense, SCSI_SENSE_BUFFERSIZE,
+					   &sshdr);
+		if (!err)
+			return SCSI_DH_IO;
+
+		err = clariion_check_sense(sdev, &sshdr);
+		if (retry > 0 && err == NEEDS_RETRY) {
+			retry--;
+			goto retry;
+		}
+		sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code "
+			    "%02x/%02x/%02x\n", CLARIION_NAME,
+			      sshdr.sense_key, sshdr.asc, sshdr.ascq);
+		err = SCSI_DH_IO;
+	} else {
+		err = parse_sp_info_reply(sdev, csdev);
+	}
+	return err;
+}
+
+static int clariion_activate(struct scsi_device *sdev)
+{
+	struct clariion_dh_data *csdev = get_clariion_data(sdev);
+	int result;
+
+	result = clariion_send_inquiry(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+
+	if (csdev->lun_state == CLARIION_LUN_OWNED)
+		goto done;
+
+	result = send_trespass_cmd(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+	sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
+		    CLARIION_NAME,
+		    csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );
+
+	/* Update status */
+	result = clariion_send_inquiry(sdev, csdev);
+	if (result != SCSI_DH_OK)
+		goto done;
+
+done:
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: at SP %c Port %d (%s, default SP %c)\n",
+		    CLARIION_NAME, csdev->current_sp + 'A',
+		    csdev->port, lun_state[csdev->lun_state],
+		    csdev->default_sp + 'A');
+
+	return result;
 }
 
 const struct scsi_dh_devlist clariion_dev_list[] = {
 	{"DGC", "RAID"},
 	{"DGC", "DISK"},
+	{"DGC", "VRAID"},
 	{NULL, NULL},
 };
 
@@ -407,6 +580,7 @@ static struct scsi_device_handler clariion_dh = {
 	.detach		= clariion_bus_detach,
 	.check_sense	= clariion_check_sense,
 	.activate	= clariion_activate,
+	.prep_fn	= clariion_prep_fn,
 };
 
 /*
@@ -417,28 +591,50 @@ static int clariion_bus_attach(struct scsi_device *sdev)
 	struct scsi_dh_data *scsi_dh_data;
 	struct clariion_dh_data *h;
 	unsigned long flags;
+	int err;
 
 	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
 			       + sizeof(*h) , GFP_KERNEL);
 	if (!scsi_dh_data) {
-		sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
+		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
 			    CLARIION_NAME);
 		return -ENOMEM;
 	}
 
 	scsi_dh_data->scsi_dh = &clariion_dh;
 	h = (struct clariion_dh_data *) scsi_dh_data->buf;
+	h->lun_state = CLARIION_LUN_UNINITIALIZED;
 	h->default_sp = CLARIION_UNBOUND_LU;
 	h->current_sp = CLARIION_UNBOUND_LU;
 
+	err = clariion_std_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
+
+	err = clariion_send_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
+
+	if (!try_module_get(THIS_MODULE))
+		goto failed;
+
 	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 	sdev->scsi_dh_data = scsi_dh_data;
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 
-	sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", CLARIION_NAME);
-	try_module_get(THIS_MODULE);
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: connected to SP %c Port %d (%s, default SP %c)\n",
+		    CLARIION_NAME, h->current_sp + 'A',
+		    h->port, lun_state[h->lun_state],
+		    h->default_sp + 'A');
 
 	return 0;
+
+failed:
+	kfree(scsi_dh_data);
+	sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
+		    CLARIION_NAME);
+	return -EINVAL;
 }
 
 static void clariion_bus_detach(struct scsi_device *sdev)
@@ -451,7 +647,7 @@ static void clariion_bus_detach(struct scsi_device *sdev)
 	sdev->scsi_dh_data = NULL;
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 
-	sdev_printk(KERN_NOTICE, sdev, "Detached %s.\n",
+	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n",
 		    CLARIION_NAME);
 
 	kfree(scsi_dh_data);
@@ -464,7 +660,8 @@ static int __init clariion_init(void)
 
 	r = scsi_register_device_handler(&clariion_dh);
 	if (r != 0)
-		printk(KERN_ERR "Failed to register scsi device handler.");
+		printk(KERN_ERR "%s: Failed to register scsi device handler.",
+			CLARIION_NAME);
 	return r;
 }
 
diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h
index 3ad2303d1a1..e15e2aade69 100644
--- a/include/scsi/scsi_dh.h
+++ b/include/scsi/scsi_dh.h
@@ -32,6 +32,7 @@ enum {
 	 */
 	SCSI_DH_DEV_FAILED,	/* generic device error */
 	SCSI_DH_DEV_TEMP_BUSY,
+	SCSI_DH_DEV_UNSUPP,	/* device handler not supported */
 	SCSI_DH_DEVICE_MAX,	/* max device blkerr definition */
 
 	/*
-- 
cgit v1.2.3


From 2aef6d5c05ee5c02f2e4d737b8738deb118cf892 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 17 Jul 2008 16:53:09 -0700
Subject: [SCSI] scsi_dh: Update hp_sw hardware handler

This patch updates the hp_sw device handler to properly
check the return codes etc.
And adds the 'correct' machine definitions.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/scsi_dh_hp_sw.c | 272 ++++++++++++++++++++++++----
 1 file changed, 234 insertions(+), 38 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 78259bc5dfc..9c7a1f8ebb7 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -4,6 +4,7 @@
  *
  * Copyright (C) 2006 Red Hat, Inc.  All rights reserved.
  * Copyright (C) 2006 Mike Christie
+ * Copyright (C) 2008 Hannes Reinecke <hare@suse.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,13 +26,18 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dh.h>
 
-#define HP_SW_NAME	"hp_sw"
+#define HP_SW_NAME			"hp_sw"
 
-#define HP_SW_TIMEOUT (60 * HZ)
-#define HP_SW_RETRIES 3
+#define HP_SW_TIMEOUT			(60 * HZ)
+#define HP_SW_RETRIES			3
+
+#define HP_SW_PATH_UNINITIALIZED	-1
+#define HP_SW_PATH_ACTIVE		0
+#define HP_SW_PATH_PASSIVE		1
 
 struct hp_sw_dh_data {
 	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+	int path_state;
 	int retries;
 };
 
@@ -42,51 +48,161 @@ static inline struct hp_sw_dh_data *get_hp_sw_data(struct scsi_device *sdev)
 	return ((struct hp_sw_dh_data *) scsi_dh_data->buf);
 }
 
-static int hp_sw_done(struct scsi_device *sdev)
+/*
+ * tur_done - Handle TEST UNIT READY return status
+ * @sdev: sdev the command has been sent to
+ * @errors: blk error code
+ *
+ * Returns SCSI_DH_DEV_OFFLINED if the sdev is on the passive path
+ */
+static int tur_done(struct scsi_device *sdev, unsigned char *sense)
 {
-	struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
 	struct scsi_sense_hdr sshdr;
-	int rc;
-
-	sdev_printk(KERN_INFO, sdev, "hp_sw_done\n");
+	int ret;
 
-	rc = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
-	if (!rc)
+	ret = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
+	if (!ret) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: sending tur failed, no sense available\n",
+			    HP_SW_NAME);
+		ret = SCSI_DH_IO;
 		goto done;
+	}
 	switch (sshdr.sense_key) {
+	case UNIT_ATTENTION:
+		ret = SCSI_DH_IMM_RETRY;
+		break;
 	case NOT_READY:
-		if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
-			rc = SCSI_DH_RETRY;
-			h->retries++;
+		if ((sshdr.asc == 0x04) && (sshdr.ascq == 2)) {
+			/*
+			 * LUN not ready - Initialization command required
+			 *
+			 * This is the passive path
+			 */
+			ret = SCSI_DH_DEV_OFFLINED;
 			break;
 		}
-		/* fall through */
+		/* Fallthrough */
 	default:
-		h->retries++;
-		rc = SCSI_DH_IMM_RETRY;
+		sdev_printk(KERN_WARNING, sdev,
+			   "%s: sending tur failed, sense %x/%x/%x\n",
+			   HP_SW_NAME, sshdr.sense_key, sshdr.asc,
+			   sshdr.ascq);
+		break;
 	}
 
 done:
-	if (rc == SCSI_DH_OK || rc == SCSI_DH_IO)
-		h->retries = 0;
-	else if (h->retries > HP_SW_RETRIES) {
-		h->retries = 0;
+	return ret;
+}
+
+/*
+ * hp_sw_tur - Send TEST UNIT READY
+ * @sdev: sdev command should be sent to
+ *
+ * Use the TEST UNIT READY command to determine
+ * the path state.
+ */
+static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
+{
+	struct request *req;
+	int ret;
+
+	req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
+	if (!req)
+		return SCSI_DH_RES_TEMP_UNAVAIL;
+
+	req->cmd_type = REQ_TYPE_BLOCK_PC;
+	req->cmd_flags |= REQ_FAILFAST;
+	req->cmd_len = COMMAND_SIZE(TEST_UNIT_READY);
+	memset(req->cmd, 0, MAX_COMMAND_SIZE);
+	req->cmd[0] = TEST_UNIT_READY;
+	req->timeout = HP_SW_TIMEOUT;
+	req->sense = h->sense;
+	memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	req->sense_len = 0;
+
+retry:
+	ret = blk_execute_rq(req->q, NULL, req, 1);
+	if (ret == -EIO) {
+		if (req->sense_len > 0) {
+			ret = tur_done(sdev, h->sense);
+		} else {
+			sdev_printk(KERN_WARNING, sdev,
+				    "%s: sending tur failed with %x\n",
+				    HP_SW_NAME, req->errors);
+			ret = SCSI_DH_IO;
+		}
+	} else {
+		h->path_state = HP_SW_PATH_ACTIVE;
+		ret = SCSI_DH_OK;
+	}
+	if (ret == SCSI_DH_IMM_RETRY)
+		goto retry;
+	if (ret == SCSI_DH_DEV_OFFLINED) {
+		h->path_state = HP_SW_PATH_PASSIVE;
+		ret = SCSI_DH_OK;
+	}
+
+	blk_put_request(req);
+
+	return ret;
+}
+
+/*
+ * start_done - Handle START STOP UNIT return status
+ * @sdev: sdev the command has been sent to
+ * @errors: blk error code
+ */
+static int start_done(struct scsi_device *sdev, unsigned char *sense)
+{
+	struct scsi_sense_hdr sshdr;
+	int rc;
+
+	rc = scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr);
+	if (!rc) {
+		sdev_printk(KERN_WARNING, sdev,
+			    "%s: sending start_stop_unit failed, "
+			    "no sense available\n",
+			    HP_SW_NAME);
+		return SCSI_DH_IO;
+	}
+	switch (sshdr.sense_key) {
+	case NOT_READY:
+		if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
+			/*
+			 * LUN not ready - manual intervention required
+			 *
+			 * Switch-over in progress, retry.
+			 */
+			rc = SCSI_DH_RETRY;
+			break;
+		}
+		/* fall through */
+	default:
+		sdev_printk(KERN_WARNING, sdev,
+			   "%s: sending start_stop_unit failed, sense %x/%x/%x\n",
+			   HP_SW_NAME, sshdr.sense_key, sshdr.asc,
+			   sshdr.ascq);
 		rc = SCSI_DH_IO;
 	}
+
 	return rc;
 }
 
-static int hp_sw_activate(struct scsi_device *sdev)
+/*
+ * hp_sw_start_stop - Send START STOP UNIT command
+ * @sdev: sdev command should be sent to
+ *
+ * Sending START STOP UNIT activates the SP.
+ */
+static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 {
-	struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
 	struct request *req;
-	int ret = SCSI_DH_RES_TEMP_UNAVAIL;
+	int ret, retry;
 
-	req = blk_get_request(sdev->request_queue, WRITE, GFP_ATOMIC);
+	req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
 	if (!req)
-		goto done;
-
-	sdev_printk(KERN_INFO, sdev, "sending START_STOP.");
+		return SCSI_DH_RES_TEMP_UNAVAIL;
 
 	req->cmd_type = REQ_TYPE_BLOCK_PC;
 	req->cmd_flags |= REQ_FAILFAST;
@@ -98,19 +214,78 @@ static int hp_sw_activate(struct scsi_device *sdev)
 	req->sense = h->sense;
 	memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
 	req->sense_len = 0;
+	retry = h->retries;
 
+retry:
 	ret = blk_execute_rq(req->q, NULL, req, 1);
-	if (!ret) /* SUCCESS */
-		ret = hp_sw_done(sdev);
-	else
+	if (ret == -EIO) {
+		if (req->sense_len > 0) {
+			ret = start_done(sdev, h->sense);
+		} else {
+			sdev_printk(KERN_WARNING, sdev,
+				    "%s: sending start_stop_unit failed with %x\n",
+				    HP_SW_NAME, req->errors);
+			ret = SCSI_DH_IO;
+		}
+	} else
+		ret = SCSI_DH_OK;
+
+	if (ret == SCSI_DH_RETRY) {
+		if (--retry)
+			goto retry;
 		ret = SCSI_DH_IO;
-done:
+	}
+
+	blk_put_request(req);
+
+	return ret;
+}
+
+static int hp_sw_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+	struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
+	int ret = BLKPREP_OK;
+
+	if (h->path_state != HP_SW_PATH_ACTIVE) {
+		ret = BLKPREP_KILL;
+		req->cmd_flags |= REQ_QUIET;
+	}
+	return ret;
+
+}
+
+/*
+ * hp_sw_activate - Activate a path
+ * @sdev: sdev on the path to be activated
+ *
+ * The HP Active/Passive firmware is pretty simple;
+ * the passive path reports NOT READY with sense codes
+ * 0x04/0x02; a START STOP UNIT command will then
+ * activate the passive path (and deactivate the
+ * previously active one).
+ */
+static int hp_sw_activate(struct scsi_device *sdev)
+{
+	int ret = SCSI_DH_OK;
+	struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
+
+	ret = hp_sw_tur(sdev, h);
+
+	if (ret == SCSI_DH_OK && h->path_state == HP_SW_PATH_PASSIVE) {
+		ret = hp_sw_start_stop(sdev, h);
+		if (ret == SCSI_DH_OK)
+			sdev_printk(KERN_INFO, sdev,
+				    "%s: activated path\n",
+				    HP_SW_NAME);
+	}
+
 	return ret;
 }
 
 const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
-	{"COMPAQ", "MSA"},
-	{"HP", "HSV"},
+	{"COMPAQ", "MSA1000 VOLUME"},
+	{"COMPAQ", "HSV110"},
+	{"HP", "HSV100"},
 	{"DEC", "HSG80"},
 	{NULL, NULL},
 };
@@ -125,30 +300,51 @@ static struct scsi_device_handler hp_sw_dh = {
 	.attach		= hp_sw_bus_attach,
 	.detach		= hp_sw_bus_detach,
 	.activate	= hp_sw_activate,
+	.prep_fn	= hp_sw_prep_fn,
 };
 
 static int hp_sw_bus_attach(struct scsi_device *sdev)
 {
 	struct scsi_dh_data *scsi_dh_data;
+	struct hp_sw_dh_data *h;
 	unsigned long flags;
+	int ret;
 
 	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
 			       + sizeof(struct hp_sw_dh_data) , GFP_KERNEL);
 	if (!scsi_dh_data) {
-		sdev_printk(KERN_ERR, sdev, "Attach Failed %s.\n",
+		sdev_printk(KERN_ERR, sdev, "%s: Attach Failed\n",
 			    HP_SW_NAME);
 		return 0;
 	}
 
 	scsi_dh_data->scsi_dh = &hp_sw_dh;
+	h = (struct hp_sw_dh_data *) scsi_dh_data->buf;
+	h->path_state = HP_SW_PATH_UNINITIALIZED;
+	h->retries = HP_SW_RETRIES;
+
+	ret = hp_sw_tur(sdev, h);
+	if (ret != SCSI_DH_OK || h->path_state == HP_SW_PATH_UNINITIALIZED)
+		goto failed;
+
+	if (!try_module_get(THIS_MODULE))
+		goto failed;
+
 	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 	sdev->scsi_dh_data = scsi_dh_data;
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-	try_module_get(THIS_MODULE);
 
-	sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n", HP_SW_NAME);
+	sdev_printk(KERN_INFO, sdev, "%s: attached to %s path\n",
+		    HP_SW_NAME, h->path_state == HP_SW_PATH_ACTIVE?
+		    "active":"passive");
 
 	return 0;
+
+failed:
+	kfree(scsi_dh_data);
+	sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
+		    HP_SW_NAME);
+	return -EINVAL;
 }
 
 static void hp_sw_bus_detach( struct scsi_device *sdev )
@@ -162,7 +358,7 @@ static void hp_sw_bus_detach( struct scsi_device *sdev )
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 	module_put(THIS_MODULE);
 
-	sdev_printk(KERN_NOTICE, sdev, "Detached %s\n", HP_SW_NAME);
+	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", HP_SW_NAME);
 
 	kfree(scsi_dh_data);
 }
@@ -180,6 +376,6 @@ static void __exit hp_sw_exit(void)
 module_init(hp_sw_init);
 module_exit(hp_sw_exit);
 
-MODULE_DESCRIPTION("HP MSA 1000");
+MODULE_DESCRIPTION("HP Active/Passive driver");
 MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From ca9f0089867c9e476cf2e6d4615d2aae887171b2 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 17 Jul 2008 16:53:15 -0700
Subject: [SCSI] scsi_dh: Update RDAC device handler

This patch updates the RDAC device handler to
refuse to attach to devices not supporting the
RDAC vpd pages.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/scsi_dh_rdac.c | 163 +++++++++++++++++------------
 1 file changed, 94 insertions(+), 69 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 0e25a6e9c82..b093a501f8a 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -173,6 +173,11 @@ struct rdac_dh_data {
 #define RDAC_STATE_ACTIVE	0
 #define RDAC_STATE_PASSIVE	1
 	unsigned char		state;
+
+#define RDAC_LUN_UNOWNED	0
+#define RDAC_LUN_OWNED		1
+#define RDAC_LUN_AVT		2
+	char			lun_state;
 	unsigned char		sense[SCSI_SENSE_BUFFERSIZE];
 	union			{
 		struct c2_inquiry c2;
@@ -182,6 +187,13 @@ struct rdac_dh_data {
 	} inq;
 };
 
+static const char *lun_state[] =
+{
+	"unowned",
+	"owned",
+	"owned (AVT mode)",
+};
+
 static LIST_HEAD(ctlr_list);
 static DEFINE_SPINLOCK(list_lock);
 
@@ -197,9 +209,8 @@ static struct request *get_rdac_req(struct scsi_device *sdev,
 {
 	struct request *rq;
 	struct request_queue *q = sdev->request_queue;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	rq = blk_get_request(q, rw, GFP_KERNEL);
+	rq = blk_get_request(q, rw, GFP_NOIO);
 
 	if (!rq) {
 		sdev_printk(KERN_INFO, sdev,
@@ -207,17 +218,14 @@ static struct request *get_rdac_req(struct scsi_device *sdev,
 		return NULL;
 	}
 
-	if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_KERNEL)) {
+	if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
 		blk_put_request(rq);
 		sdev_printk(KERN_INFO, sdev,
 				"get_rdac_req: blk_rq_map_kern failed.\n");
 		return NULL;
 	}
 
-	memset(&rq->cmd, 0, BLK_MAX_CDB);
-	rq->sense = h->sense;
-	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
-	rq->sense_len = 0;
+	memset(rq->cmd, 0, BLK_MAX_CDB);
 
 	rq->cmd_type = REQ_TYPE_BLOCK_PC;
 	rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE;
@@ -227,12 +235,12 @@ static struct request *get_rdac_req(struct scsi_device *sdev,
 	return rq;
 }
 
-static struct request *rdac_failover_get(struct scsi_device *sdev)
+static struct request *rdac_failover_get(struct scsi_device *sdev,
+					 struct rdac_dh_data *h)
 {
 	struct request *rq;
 	struct rdac_mode_common *common;
 	unsigned data_size;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
 	if (h->ctlr->use_ms10) {
 		struct rdac_pg_expanded *rdac_pg;
@@ -277,6 +285,10 @@ static struct request *rdac_failover_get(struct scsi_device *sdev)
 	}
 	rq->cmd_len = COMMAND_SIZE(rq->cmd[0]);
 
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = 0;
+
 	return rq;
 }
 
@@ -321,11 +333,10 @@ done:
 }
 
 static int submit_inquiry(struct scsi_device *sdev, int page_code,
-		unsigned int len)
+			  unsigned int len, struct rdac_dh_data *h)
 {
 	struct request *rq;
 	struct request_queue *q = sdev->request_queue;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 	int err = SCSI_DH_RES_TEMP_UNAVAIL;
 
 	rq = get_rdac_req(sdev, &h->inq, len, READ);
@@ -338,59 +349,68 @@ static int submit_inquiry(struct scsi_device *sdev, int page_code,
 	rq->cmd[2] = page_code;
 	rq->cmd[4] = len;
 	rq->cmd_len = COMMAND_SIZE(INQUIRY);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = 0;
+
 	err = blk_execute_rq(q, NULL, rq, 1);
 	if (err == -EIO)
 		err = SCSI_DH_IO;
+
+	blk_put_request(rq);
 done:
 	return err;
 }
 
-static int get_lun(struct scsi_device *sdev)
+static int get_lun(struct scsi_device *sdev, struct rdac_dh_data *h)
 {
 	int err;
 	struct c8_inquiry *inqp;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry));
+	err = submit_inquiry(sdev, 0xC8, sizeof(struct c8_inquiry), h);
 	if (err == SCSI_DH_OK) {
 		inqp = &h->inq.c8;
-		h->lun = inqp->lun[7]; /* currently it uses only one byte */
+		if (inqp->page_code != 0xc8)
+			return SCSI_DH_NOSYS;
+		if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' ||
+		    inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd')
+			return SCSI_DH_NOSYS;
+		h->lun = scsilun_to_int((struct scsi_lun *)inqp->lun);
 	}
 	return err;
 }
 
-#define RDAC_OWNED	0
-#define RDAC_UNOWNED	1
-#define RDAC_FAILED	2
-static int check_ownership(struct scsi_device *sdev)
+static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
 {
 	int err;
 	struct c9_inquiry *inqp;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry));
+	err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
 	if (err == SCSI_DH_OK) {
-		err = RDAC_UNOWNED;
 		inqp = &h->inq.c9;
-		/*
-		 * If in AVT mode or if the path already owns the LUN,
-		 * return RDAC_OWNED;
-		 */
-		if (((inqp->avte_cvp >> 7) == 0x1) ||
-				 ((inqp->avte_cvp & 0x1) != 0))
-			err = RDAC_OWNED;
-	} else
-		err = RDAC_FAILED;
+		if ((inqp->avte_cvp >> 7) == 0x1) {
+			/* LUN in AVT mode */
+			sdev_printk(KERN_NOTICE, sdev,
+				    "%s: AVT mode detected\n",
+				    RDAC_NAME);
+			h->lun_state = RDAC_LUN_AVT;
+		} else if ((inqp->avte_cvp & 0x1) != 0) {
+			/* LUN was owned by the controller */
+			h->lun_state = RDAC_LUN_OWNED;
+		}
+	}
+
 	return err;
 }
 
-static int initialize_controller(struct scsi_device *sdev)
+static int initialize_controller(struct scsi_device *sdev,
+				 struct rdac_dh_data *h)
 {
 	int err;
 	struct c4_inquiry *inqp;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry));
+	err = submit_inquiry(sdev, 0xC4, sizeof(struct c4_inquiry), h);
 	if (err == SCSI_DH_OK) {
 		inqp = &h->inq.c4;
 		h->ctlr = get_controller(inqp->subsys_id, inqp->slot_id);
@@ -400,13 +420,12 @@ static int initialize_controller(struct scsi_device *sdev)
 	return err;
 }
 
-static int set_mode_select(struct scsi_device *sdev)
+static int set_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
 {
 	int err;
 	struct c2_inquiry *inqp;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 
-	err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry));
+	err = submit_inquiry(sdev, 0xC2, sizeof(struct c2_inquiry), h);
 	if (err == SCSI_DH_OK) {
 		inqp = &h->inq.c2;
 		/*
@@ -421,13 +440,13 @@ static int set_mode_select(struct scsi_device *sdev)
 	return err;
 }
 
-static int mode_select_handle_sense(struct scsi_device *sdev)
+static int mode_select_handle_sense(struct scsi_device *sdev,
+				    unsigned char *sensebuf)
 {
 	struct scsi_sense_hdr sense_hdr;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 	int sense, err = SCSI_DH_IO, ret;
 
-	ret = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
+	ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr);
 	if (!ret)
 		goto done;
 
@@ -451,14 +470,13 @@ done:
 	return err;
 }
 
-static int send_mode_select(struct scsi_device *sdev)
+static int send_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
 {
 	struct request *rq;
 	struct request_queue *q = sdev->request_queue;
-	struct rdac_dh_data *h = get_rdac_data(sdev);
 	int err = SCSI_DH_RES_TEMP_UNAVAIL;
 
-	rq = rdac_failover_get(sdev);
+	rq = rdac_failover_get(sdev, h);
 	if (!rq)
 		goto done;
 
@@ -466,9 +484,11 @@ static int send_mode_select(struct scsi_device *sdev)
 
 	err = blk_execute_rq(q, NULL, rq, 1);
 	if (err != SCSI_DH_OK)
-		err = mode_select_handle_sense(sdev);
+		err = mode_select_handle_sense(sdev, h->sense);
 	if (err == SCSI_DH_OK)
 		h->state = RDAC_STATE_ACTIVE;
+
+	blk_put_request(rq);
 done:
 	return err;
 }
@@ -478,38 +498,23 @@ static int rdac_activate(struct scsi_device *sdev)
 	struct rdac_dh_data *h = get_rdac_data(sdev);
 	int err = SCSI_DH_OK;
 
-	if (h->lun == UNINITIALIZED_LUN) {
-		err = get_lun(sdev);
-		if (err != SCSI_DH_OK)
-			goto done;
-	}
-
-	err = check_ownership(sdev);
-	switch (err) {
-	case RDAC_UNOWNED:
-		break;
-	case RDAC_OWNED:
-		err = SCSI_DH_OK;
-		goto done;
-	case RDAC_FAILED:
-	default:
-		err = SCSI_DH_IO;
+	err = check_ownership(sdev, h);
+	if (err != SCSI_DH_OK)
 		goto done;
-	}
 
 	if (!h->ctlr) {
-		err = initialize_controller(sdev);
+		err = initialize_controller(sdev, h);
 		if (err != SCSI_DH_OK)
 			goto done;
 	}
 
 	if (h->ctlr->use_ms10 == -1) {
-		err = set_mode_select(sdev);
+		err = set_mode_select(sdev, h);
 		if (err != SCSI_DH_OK)
 			goto done;
 	}
-
-	err = send_mode_select(sdev);
+	if (h->lun_state == RDAC_LUN_UNOWNED)
+		err = send_mode_select(sdev, h);
 done:
 	return err;
 }
@@ -606,11 +611,12 @@ static int rdac_bus_attach(struct scsi_device *sdev)
 	struct scsi_dh_data *scsi_dh_data;
 	struct rdac_dh_data *h;
 	unsigned long flags;
+	int err;
 
 	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
 			       + sizeof(*h) , GFP_KERNEL);
 	if (!scsi_dh_data) {
-		sdev_printk(KERN_ERR, sdev, "Attach failed %s.\n",
+		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
 			    RDAC_NAME);
 		return 0;
 	}
@@ -619,14 +625,33 @@ static int rdac_bus_attach(struct scsi_device *sdev)
 	h = (struct rdac_dh_data *) scsi_dh_data->buf;
 	h->lun = UNINITIALIZED_LUN;
 	h->state = RDAC_STATE_ACTIVE;
+
+	err = get_lun(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
+
+	err = check_ownership(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
+
+	if (!try_module_get(THIS_MODULE))
+		goto failed;
+
 	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 	sdev->scsi_dh_data = scsi_dh_data;
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-	try_module_get(THIS_MODULE);
 
-	sdev_printk(KERN_NOTICE, sdev, "Attached %s\n", RDAC_NAME);
+	sdev_printk(KERN_NOTICE, sdev,
+		    "%s: LUN %d (%s)\n",
+		    RDAC_NAME, h->lun, lun_state[(int)h->lun_state]);
 
 	return 0;
+
+failed:
+	kfree(scsi_dh_data);
+	sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
+		    RDAC_NAME);
+	return -EINVAL;
 }
 
 static void rdac_bus_detach( struct scsi_device *sdev )
@@ -645,7 +670,7 @@ static void rdac_bus_detach( struct scsi_device *sdev )
 		kref_put(&h->ctlr->kref, release_controller);
 	kfree(scsi_dh_data);
 	module_put(THIS_MODULE);
-	sdev_printk(KERN_NOTICE, sdev, "Detached %s\n", RDAC_NAME);
+	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME);
 }
 
 
-- 
cgit v1.2.3


From 057ea7c9683c3d684128cced796f03c179ecf1c2 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 17 Jul 2008 16:53:21 -0700
Subject: [SCSI] scsi_dh: add generic SPC-3 alua handler

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/Kconfig        |   8 +
 drivers/scsi/device_handler/Makefile       |   1 +
 drivers/scsi/device_handler/scsi_dh_alua.c | 802 +++++++++++++++++++++++++++++
 include/scsi/scsi.h                        |   3 +
 4 files changed, 814 insertions(+)
 create mode 100644 drivers/scsi/device_handler/scsi_dh_alua.c

diff --git a/drivers/scsi/device_handler/Kconfig b/drivers/scsi/device_handler/Kconfig
index 2adc0f666b6..67070257919 100644
--- a/drivers/scsi/device_handler/Kconfig
+++ b/drivers/scsi/device_handler/Kconfig
@@ -30,3 +30,11 @@ config SCSI_DH_EMC
 	depends on SCSI_DH
 	help
 	If you have a EMC CLARiiON select y. Otherwise, say N.
+
+config SCSI_DH_ALUA
+	tristate "SPC-3 ALUA Device Handler (EXPERIMENTAL)"
+	depends on SCSI_DH && EXPERIMENTAL
+	help
+	  SCSI Device handler for generic SPC-3 Asymmetric Logical Unit
+	  Access (ALUA).
+
diff --git a/drivers/scsi/device_handler/Makefile b/drivers/scsi/device_handler/Makefile
index 35272e93b1c..e1d2ea083e1 100644
--- a/drivers/scsi/device_handler/Makefile
+++ b/drivers/scsi/device_handler/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_SCSI_DH)		+= scsi_dh.o
 obj-$(CONFIG_SCSI_DH_RDAC)	+= scsi_dh_rdac.o
 obj-$(CONFIG_SCSI_DH_HP_SW)	+= scsi_dh_hp_sw.o
 obj-$(CONFIG_SCSI_DH_EMC)	+= scsi_dh_emc.o
+obj-$(CONFIG_SCSI_DH_ALUA)	+= scsi_dh_alua.o
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
new file mode 100644
index 00000000000..6e464488bca
--- /dev/null
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -0,0 +1,802 @@
+/*
+ * Generic SCSI-3 ALUA SCSI Device Handler
+ *
+ * Copyright (C) 2007, 2008 Hannes Reinecke, SUSE Linux Products GmbH.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dh.h>
+
+#define ALUA_DH_NAME "alua"
+#define ALUA_DH_VER "1.2"
+
+#define TPGS_STATE_OPTIMIZED		0x0
+#define TPGS_STATE_NONOPTIMIZED		0x1
+#define TPGS_STATE_STANDBY		0x2
+#define TPGS_STATE_UNAVAILABLE		0x3
+#define TPGS_STATE_OFFLINE		0xe
+#define TPGS_STATE_TRANSITIONING	0xf
+
+#define TPGS_SUPPORT_NONE		0x00
+#define TPGS_SUPPORT_OPTIMIZED		0x01
+#define TPGS_SUPPORT_NONOPTIMIZED	0x02
+#define TPGS_SUPPORT_STANDBY		0x04
+#define TPGS_SUPPORT_UNAVAILABLE	0x08
+#define TPGS_SUPPORT_OFFLINE		0x40
+#define TPGS_SUPPORT_TRANSITION		0x80
+
+#define TPGS_MODE_UNINITIALIZED		 -1
+#define TPGS_MODE_NONE			0x0
+#define TPGS_MODE_IMPLICIT		0x1
+#define TPGS_MODE_EXPLICIT		0x2
+
+#define ALUA_INQUIRY_SIZE		36
+#define ALUA_FAILOVER_TIMEOUT		(60 * HZ)
+#define ALUA_FAILOVER_RETRIES		5
+
+struct alua_dh_data {
+	int			group_id;
+	int			rel_port;
+	int			tpgs;
+	int			state;
+	unsigned char		inq[ALUA_INQUIRY_SIZE];
+	unsigned char		*buff;
+	int			bufflen;
+	unsigned char		sense[SCSI_SENSE_BUFFERSIZE];
+	int			senselen;
+};
+
+#define ALUA_POLICY_SWITCH_CURRENT	0
+#define ALUA_POLICY_SWITCH_ALL		1
+
+static inline struct alua_dh_data *get_alua_data(struct scsi_device *sdev)
+{
+	struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
+	BUG_ON(scsi_dh_data == NULL);
+	return ((struct alua_dh_data *) scsi_dh_data->buf);
+}
+
+static int realloc_buffer(struct alua_dh_data *h, unsigned len)
+{
+	if (h->buff && h->buff != h->inq)
+		kfree(h->buff);
+
+	h->buff = kmalloc(len, GFP_NOIO);
+	if (!h->buff) {
+		h->buff = h->inq;
+		h->bufflen = ALUA_INQUIRY_SIZE;
+		return 1;
+	}
+	h->bufflen = len;
+	return 0;
+}
+
+static struct request *get_alua_req(struct scsi_device *sdev,
+				    void *buffer, unsigned buflen, int rw)
+{
+	struct request *rq;
+	struct request_queue *q = sdev->request_queue;
+
+	rq = blk_get_request(q, rw, GFP_NOIO);
+
+	if (!rq) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: blk_get_request failed\n", __FUNCTION__);
+		return NULL;
+	}
+
+	if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
+		blk_put_request(rq);
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: blk_rq_map_kern failed\n", __FUNCTION__);
+		return NULL;
+	}
+
+	rq->cmd_type = REQ_TYPE_BLOCK_PC;
+	rq->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE;
+	rq->retries = ALUA_FAILOVER_RETRIES;
+	rq->timeout = ALUA_FAILOVER_TIMEOUT;
+
+	return rq;
+}
+
+/*
+ * submit_std_inquiry - Issue a standard INQUIRY command
+ * @sdev: sdev the command should be send to
+ */
+static int submit_std_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct request *rq;
+	int err = SCSI_DH_RES_TEMP_UNAVAIL;
+
+	rq = get_alua_req(sdev, h->inq, ALUA_INQUIRY_SIZE, READ);
+	if (!rq)
+		goto done;
+
+	/* Prepare the command. */
+	rq->cmd[0] = INQUIRY;
+	rq->cmd[1] = 0;
+	rq->cmd[2] = 0;
+	rq->cmd[4] = ALUA_INQUIRY_SIZE;
+	rq->cmd_len = COMMAND_SIZE(INQUIRY);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = h->senselen = 0;
+
+	err = blk_execute_rq(rq->q, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: std inquiry failed with %x\n",
+			    ALUA_DH_NAME, rq->errors);
+		h->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+	blk_put_request(rq);
+done:
+	return err;
+}
+
+/*
+ * submit_vpd_inquiry - Issue an INQUIRY VPD page 0x83 command
+ * @sdev: sdev the command should be sent to
+ */
+static int submit_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct request *rq;
+	int err = SCSI_DH_RES_TEMP_UNAVAIL;
+
+	rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
+	if (!rq)
+		goto done;
+
+	/* Prepare the command. */
+	rq->cmd[0] = INQUIRY;
+	rq->cmd[1] = 1;
+	rq->cmd[2] = 0x83;
+	rq->cmd[4] = h->bufflen;
+	rq->cmd_len = COMMAND_SIZE(INQUIRY);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = h->senselen = 0;
+
+	err = blk_execute_rq(rq->q, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: evpd inquiry failed with %x\n",
+			    ALUA_DH_NAME, rq->errors);
+		h->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+	blk_put_request(rq);
+done:
+	return err;
+}
+
+/*
+ * submit_rtpg - Issue a REPORT TARGET GROUP STATES command
+ * @sdev: sdev the command should be sent to
+ */
+static unsigned submit_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct request *rq;
+	int err = SCSI_DH_RES_TEMP_UNAVAIL;
+
+	rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
+	if (!rq)
+		goto done;
+
+	/* Prepare the command. */
+	rq->cmd[0] = MAINTENANCE_IN;
+	rq->cmd[1] = MI_REPORT_TARGET_PGS;
+	rq->cmd[6] = (h->bufflen >> 24) & 0xff;
+	rq->cmd[7] = (h->bufflen >> 16) & 0xff;
+	rq->cmd[8] = (h->bufflen >>  8) & 0xff;
+	rq->cmd[9] = h->bufflen & 0xff;
+	rq->cmd_len = COMMAND_SIZE(MAINTENANCE_IN);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = h->senselen = 0;
+
+	err = blk_execute_rq(rq->q, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: rtpg failed with %x\n",
+			    ALUA_DH_NAME, rq->errors);
+		h->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+	blk_put_request(rq);
+done:
+	return err;
+}
+
+/*
+ * submit_stpg - Issue a SET TARGET GROUP STATES command
+ * @sdev: sdev the command should be sent to
+ *
+ * Currently we're only setting the current target port group state
+ * to 'active/optimized' and let the array firmware figure out
+ * the states of the remaining groups.
+ */
+static unsigned submit_stpg(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct request *rq;
+	int err = SCSI_DH_RES_TEMP_UNAVAIL;
+	int stpg_len = 8;
+
+	/* Prepare the data buffer */
+	memset(h->buff, 0, stpg_len);
+	h->buff[4] = TPGS_STATE_OPTIMIZED & 0x0f;
+	h->buff[6] = (h->group_id >> 8) & 0x0f;
+	h->buff[7] = h->group_id & 0x0f;
+
+	rq = get_alua_req(sdev, h->buff, stpg_len, WRITE);
+	if (!rq)
+		goto done;
+
+	/* Prepare the command. */
+	rq->cmd[0] = MAINTENANCE_OUT;
+	rq->cmd[1] = MO_SET_TARGET_PGS;
+	rq->cmd[6] = (stpg_len >> 24) & 0xff;
+	rq->cmd[7] = (stpg_len >> 16) & 0xff;
+	rq->cmd[8] = (stpg_len >>  8) & 0xff;
+	rq->cmd[9] = stpg_len & 0xff;
+	rq->cmd_len = COMMAND_SIZE(MAINTENANCE_OUT);
+
+	rq->sense = h->sense;
+	memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
+	rq->sense_len = h->senselen = 0;
+
+	err = blk_execute_rq(rq->q, NULL, rq, 1);
+	if (err == -EIO) {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: stpg failed with %x\n",
+			    ALUA_DH_NAME, rq->errors);
+		h->senselen = rq->sense_len;
+		err = SCSI_DH_IO;
+	}
+	blk_put_request(rq);
+done:
+	return err;
+}
+
+/*
+ * alua_std_inquiry - Evaluate standard INQUIRY command
+ * @sdev: device to be checked
+ *
+ * Just extract the TPGS setting to find out if ALUA
+ * is supported.
+ */
+static int alua_std_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	int err;
+
+	err = submit_std_inquiry(sdev, h);
+
+	if (err != SCSI_DH_OK)
+		return err;
+
+	/* Check TPGS setting */
+	h->tpgs = (h->inq[5] >> 4) & 0x3;
+	switch (h->tpgs) {
+	case TPGS_MODE_EXPLICIT|TPGS_MODE_IMPLICIT:
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: supports implicit and explicit TPGS\n",
+			    ALUA_DH_NAME);
+		break;
+	case TPGS_MODE_EXPLICIT:
+		sdev_printk(KERN_INFO, sdev, "%s: supports explicit TPGS\n",
+			    ALUA_DH_NAME);
+		break;
+	case TPGS_MODE_IMPLICIT:
+		sdev_printk(KERN_INFO, sdev, "%s: supports implicit TPGS\n",
+			    ALUA_DH_NAME);
+		break;
+	default:
+		h->tpgs = TPGS_MODE_NONE;
+		sdev_printk(KERN_INFO, sdev, "%s: not supported\n",
+			    ALUA_DH_NAME);
+		err = SCSI_DH_DEV_UNSUPP;
+		break;
+	}
+
+	return err;
+}
+
+/*
+ * alua_vpd_inquiry - Evaluate INQUIRY vpd page 0x83
+ * @sdev: device to be checked
+ *
+ * Extract the relative target port and the target port group
+ * descriptor from the list of identificators.
+ */
+static int alua_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	int len;
+	unsigned err;
+	unsigned char *d;
+
+ retry:
+	err = submit_vpd_inquiry(sdev, h);
+
+	if (err != SCSI_DH_OK)
+		return err;
+
+	/* Check if vpd page exceeds initial buffer */
+	len = (h->buff[2] << 8) + h->buff[3] + 4;
+	if (len > h->bufflen) {
+		/* Resubmit with the correct length */
+		if (realloc_buffer(h, len)) {
+			sdev_printk(KERN_WARNING, sdev,
+				    "%s: kmalloc buffer failed\n",
+				    ALUA_DH_NAME);
+			/* Temporary failure, bypass */
+			return SCSI_DH_DEV_TEMP_BUSY;
+		}
+		goto retry;
+	}
+
+	/*
+	 * Now look for the correct descriptor.
+	 */
+	d = h->buff + 4;
+	while (d < h->buff + len) {
+		switch (d[1] & 0xf) {
+		case 0x4:
+			/* Relative target port */
+			h->rel_port = (d[6] << 8) + d[7];
+			break;
+		case 0x5:
+			/* Target port group */
+			h->group_id = (d[6] << 8) + d[7];
+			break;
+		default:
+			break;
+		}
+		d += d[3] + 4;
+	}
+
+	if (h->group_id == -1) {
+		/*
+		 * Internal error; TPGS supported but required
+		 * VPD identification descriptors not present.
+		 * Disable ALUA support
+		 */
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: No target port descriptors found\n",
+			    ALUA_DH_NAME);
+		h->state = TPGS_STATE_OPTIMIZED;
+		h->tpgs = TPGS_MODE_NONE;
+		err = SCSI_DH_DEV_UNSUPP;
+	} else {
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: port group %02x rel port %02x\n",
+			    ALUA_DH_NAME, h->group_id, h->rel_port);
+	}
+
+	return err;
+}
+
+static char print_alua_state(int state)
+{
+	switch (state) {
+	case TPGS_STATE_OPTIMIZED:
+		return 'A';
+	case TPGS_STATE_NONOPTIMIZED:
+		return 'N';
+	case TPGS_STATE_STANDBY:
+		return 'S';
+	case TPGS_STATE_UNAVAILABLE:
+		return 'U';
+	case TPGS_STATE_OFFLINE:
+		return 'O';
+	case TPGS_STATE_TRANSITIONING:
+		return 'T';
+	default:
+		return 'X';
+	}
+}
+
+static int alua_check_sense(struct scsi_device *sdev,
+			    struct scsi_sense_hdr *sense_hdr)
+{
+	switch (sense_hdr->sense_key) {
+	case NOT_READY:
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a)
+			/*
+			 * LUN Not Accessible - ALUA state transition
+			 */
+			return NEEDS_RETRY;
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
+			/*
+			 * LUN Not Accessible -- Target port in standby state
+			 */
+			return SUCCESS;
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0c)
+			/*
+			 * LUN Not Accessible -- Target port in unavailable state
+			 */
+			return SUCCESS;
+		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x12)
+			/*
+			 * LUN Not Ready -- Offline
+			 */
+			return SUCCESS;
+		break;
+	case UNIT_ATTENTION:
+		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
+			/*
+			 * Power On, Reset, or Bus Device Reset, just retry.
+			 */
+			return NEEDS_RETRY;
+		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
+			/*
+			 * ALUA state changed
+			 */
+			return NEEDS_RETRY;
+		}
+		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
+			/*
+			 * Implicit ALUA state transition failed
+			 */
+			return NEEDS_RETRY;
+		}
+		break;
+	}
+
+	return SCSI_RETURN_NOT_HANDLED;
+}
+
+/*
+ * alua_stpg - Evaluate SET TARGET GROUP STATES
+ * @sdev: the device to be evaluated
+ * @state: the new target group state
+ *
+ * Send a SET TARGET GROUP STATES command to the device.
+ * We only have to test here if we should resubmit the command;
+ * any other error is assumed as a failure.
+ */
+static int alua_stpg(struct scsi_device *sdev, int state,
+		     struct alua_dh_data *h)
+{
+	struct scsi_sense_hdr sense_hdr;
+	unsigned err;
+	int retry = ALUA_FAILOVER_RETRIES;
+
+ retry:
+	err = submit_stpg(sdev, h);
+	if (err == SCSI_DH_IO && h->senselen > 0) {
+		err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
+					   &sense_hdr);
+		if (!err)
+			return SCSI_DH_IO;
+		err = alua_check_sense(sdev, &sense_hdr);
+		if (retry > 0 && err == NEEDS_RETRY) {
+			retry--;
+			goto retry;
+		}
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: stpg sense code: %02x/%02x/%02x\n",
+			    ALUA_DH_NAME, sense_hdr.sense_key,
+			    sense_hdr.asc, sense_hdr.ascq);
+		err = SCSI_DH_IO;
+	}
+	if (err == SCSI_DH_OK) {
+		h->state = state;
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: port group %02x switched to state %c\n",
+			    ALUA_DH_NAME, h->group_id,
+			    print_alua_state(h->state) );
+	}
+	return err;
+}
+
+/*
+ * alua_rtpg - Evaluate REPORT TARGET GROUP STATES
+ * @sdev: the device to be evaluated.
+ *
+ * Evaluate the Target Port Group State.
+ * Returns SCSI_DH_DEV_OFFLINED if the path is
+ * found to be unuseable.
+ */
+static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	struct scsi_sense_hdr sense_hdr;
+	int len, k, off, valid_states = 0;
+	char *ucp;
+	unsigned err;
+
+ retry:
+	err = submit_rtpg(sdev, h);
+
+	if (err == SCSI_DH_IO && h->senselen > 0) {
+		err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
+					   &sense_hdr);
+		if (!err)
+			return SCSI_DH_IO;
+
+		err = alua_check_sense(sdev, &sense_hdr);
+		if (err == NEEDS_RETRY)
+			goto retry;
+		sdev_printk(KERN_INFO, sdev,
+			    "%s: rtpg sense code %02x/%02x/%02x\n",
+			    ALUA_DH_NAME, sense_hdr.sense_key,
+			    sense_hdr.asc, sense_hdr.ascq);
+		err = SCSI_DH_IO;
+	}
+	if (err != SCSI_DH_OK)
+		return err;
+
+	len = (h->buff[0] << 24) + (h->buff[1] << 16) +
+		(h->buff[2] << 8) + h->buff[3] + 4;
+
+	if (len > h->bufflen) {
+		/* Resubmit with the correct length */
+		if (realloc_buffer(h, len)) {
+			sdev_printk(KERN_WARNING, sdev,
+				    "%s: kmalloc buffer failed\n",__FUNCTION__);
+			/* Temporary failure, bypass */
+			return SCSI_DH_DEV_TEMP_BUSY;
+		}
+		goto retry;
+	}
+
+	for (k = 4, ucp = h->buff + 4; k < len; k += off, ucp += off) {
+		if (h->group_id == (ucp[2] << 8) + ucp[3]) {
+			h->state = ucp[0] & 0x0f;
+			valid_states = ucp[1];
+		}
+		off = 8 + (ucp[7] * 4);
+	}
+
+	sdev_printk(KERN_INFO, sdev,
+		    "%s: port group %02x state %c supports %c%c%c%c%c%c\n",
+		    ALUA_DH_NAME, h->group_id, print_alua_state(h->state),
+		    valid_states&TPGS_SUPPORT_TRANSITION?'T':'t',
+		    valid_states&TPGS_SUPPORT_OFFLINE?'O':'o',
+		    valid_states&TPGS_SUPPORT_UNAVAILABLE?'U':'u',
+		    valid_states&TPGS_SUPPORT_STANDBY?'S':'s',
+		    valid_states&TPGS_SUPPORT_NONOPTIMIZED?'N':'n',
+		    valid_states&TPGS_SUPPORT_OPTIMIZED?'A':'a');
+
+	if (h->tpgs & TPGS_MODE_EXPLICIT) {
+		switch (h->state) {
+		case TPGS_STATE_TRANSITIONING:
+			/* State transition, retry */
+			goto retry;
+			break;
+		case TPGS_STATE_OFFLINE:
+			/* Path is offline, fail */
+			err = SCSI_DH_DEV_OFFLINED;
+			break;
+		default:
+			break;
+		}
+	} else {
+		/* Only Implicit ALUA support */
+		if (h->state == TPGS_STATE_OPTIMIZED ||
+		    h->state == TPGS_STATE_NONOPTIMIZED ||
+		    h->state == TPGS_STATE_STANDBY)
+			/* Useable path if active */
+			err = SCSI_DH_OK;
+		else
+			/* Path unuseable for unavailable/offline */
+			err = SCSI_DH_DEV_OFFLINED;
+	}
+	return err;
+}
+
+/*
+ * alua_initialize - Initialize ALUA state
+ * @sdev: the device to be initialized
+ *
+ * For the prep_fn to work correctly we have
+ * to initialize the ALUA state for the device.
+ */
+static int alua_initialize(struct scsi_device *sdev, struct alua_dh_data *h)
+{
+	int err;
+
+	err = alua_std_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto out;
+
+	err = alua_vpd_inquiry(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto out;
+
+	err = alua_rtpg(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto out;
+
+out:
+	return err;
+}
+
+/*
+ * alua_activate - activate a path
+ * @sdev: device on the path to be activated
+ *
+ * We're currently switching the port group to be activated only and
+ * let the array figure out the rest.
+ * There may be other arrays which require us to switch all port groups
+ * based on a certain policy. But until we actually encounter them it
+ * should be okay.
+ */
+static int alua_activate(struct scsi_device *sdev)
+{
+	struct alua_dh_data *h = get_alua_data(sdev);
+	int err = SCSI_DH_OK;
+
+	if (h->group_id != -1) {
+		err = alua_rtpg(sdev, h);
+		if (err != SCSI_DH_OK)
+			goto out;
+	}
+
+	if (h->tpgs == TPGS_MODE_EXPLICIT && h->state != TPGS_STATE_OPTIMIZED)
+		err = alua_stpg(sdev, TPGS_STATE_OPTIMIZED, h);
+
+out:
+	return err;
+}
+
+/*
+ * alua_prep_fn - request callback
+ *
+ * Fail I/O to all paths not in state
+ * active/optimized or active/non-optimized.
+ */
+static int alua_prep_fn(struct scsi_device *sdev, struct request *req)
+{
+	struct alua_dh_data *h = get_alua_data(sdev);
+	int ret = BLKPREP_OK;
+
+	if (h->state != TPGS_STATE_OPTIMIZED &&
+	    h->state != TPGS_STATE_NONOPTIMIZED) {
+		ret = BLKPREP_KILL;
+		req->cmd_flags |= REQ_QUIET;
+	}
+	return ret;
+
+}
+
+const struct scsi_dh_devlist alua_dev_list[] = {
+	{"HP", "MSA VOLUME" },
+	{"HP", "HSV101" },
+	{"HP", "HSV111" },
+	{"HP", "HSV200" },
+	{"HP", "HSV210" },
+	{"HP", "HSV300" },
+	{"IBM", "2107900" },
+	{"IBM", "2145" },
+	{"Pillar", "Axiom" },
+	{NULL, NULL}
+};
+
+static int alua_bus_attach(struct scsi_device *sdev);
+static void alua_bus_detach(struct scsi_device *sdev);
+
+static struct scsi_device_handler alua_dh = {
+	.name = ALUA_DH_NAME,
+	.module = THIS_MODULE,
+	.devlist = alua_dev_list,
+	.attach = alua_bus_attach,
+	.detach = alua_bus_detach,
+	.prep_fn = alua_prep_fn,
+	.check_sense = alua_check_sense,
+	.activate = alua_activate,
+};
+
+/*
+ * alua_bus_attach - Attach device handler
+ * @sdev: device to be attached to
+ */
+static int alua_bus_attach(struct scsi_device *sdev)
+{
+	struct scsi_dh_data *scsi_dh_data;
+	struct alua_dh_data *h;
+	unsigned long flags;
+	int err = SCSI_DH_OK;
+
+	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+			       + sizeof(*h) , GFP_KERNEL);
+	if (!scsi_dh_data) {
+		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
+			    ALUA_DH_NAME);
+		return -ENOMEM;
+	}
+
+	scsi_dh_data->scsi_dh = &alua_dh;
+	h = (struct alua_dh_data *) scsi_dh_data->buf;
+	h->tpgs = TPGS_MODE_UNINITIALIZED;
+	h->state = TPGS_STATE_OPTIMIZED;
+	h->group_id = -1;
+	h->rel_port = -1;
+	h->buff = h->inq;
+	h->bufflen = ALUA_INQUIRY_SIZE;
+
+	err = alua_initialize(sdev, h);
+	if (err != SCSI_DH_OK)
+		goto failed;
+
+	if (!try_module_get(THIS_MODULE))
+		goto failed;
+
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	sdev->scsi_dh_data = scsi_dh_data;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+	return 0;
+
+failed:
+	kfree(scsi_dh_data);
+	sdev_printk(KERN_ERR, sdev, "%s: not attached\n", ALUA_DH_NAME);
+	return -EINVAL;
+}
+
+/*
+ * alua_bus_detach - Detach device handler
+ * @sdev: device to be detached from
+ */
+static void alua_bus_detach(struct scsi_device *sdev)
+{
+	struct scsi_dh_data *scsi_dh_data;
+	struct alua_dh_data *h;
+	unsigned long flags;
+
+	spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+	scsi_dh_data = sdev->scsi_dh_data;
+	sdev->scsi_dh_data = NULL;
+	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+	h = (struct alua_dh_data *) scsi_dh_data->buf;
+	if (h->buff && h->inq != h->buff)
+		kfree(h->buff);
+	kfree(scsi_dh_data);
+	module_put(THIS_MODULE);
+	sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", ALUA_DH_NAME);
+}
+
+static int __init alua_init(void)
+{
+	int r;
+
+	r = scsi_register_device_handler(&alua_dh);
+	if (r != 0)
+		printk(KERN_ERR "%s: Failed to register scsi device handler",
+			ALUA_DH_NAME);
+	return r;
+}
+
+static void __exit alua_exit(void)
+{
+	scsi_unregister_device_handler(&alua_dh);
+}
+
+module_init(alua_init);
+module_exit(alua_exit);
+
+MODULE_DESCRIPTION("DM Multipath ALUA support");
+MODULE_AUTHOR("Hannes Reinecke <hare@suse.de>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ALUA_DH_VER);
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 00137a7769e..5c40cc537d4 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -106,6 +106,7 @@
 #define VARIABLE_LENGTH_CMD   0x7f
 #define REPORT_LUNS           0xa0
 #define MAINTENANCE_IN        0xa3
+#define MAINTENANCE_OUT       0xa4
 #define MOVE_MEDIUM           0xa5
 #define EXCHANGE_MEDIUM       0xa6
 #define READ_12               0xa8
@@ -125,6 +126,8 @@
 #define	SAI_READ_CAPACITY_16  0x10
 /* values for maintenance in */
 #define MI_REPORT_TARGET_PGS  0x0a
+/* values for maintenance out */
+#define MO_SET_TARGET_PGS     0x0a
 
 /* Values for T10/04-262r7 */
 #define	ATA_16		      0x85	/* 16-byte pass-thru */
-- 
cgit v1.2.3


From ae11b1b36da726a8a93409b896704edc6b4f3402 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 17 Jul 2008 17:49:02 -0700
Subject: [SCSI] scsi_dh: attach to hardware handler from dm-mpath

multipath keeps a separate device table which may be
more current than the built-in one.
So we should make sure to always call ->attach whenever
a multipath map with hardware handler is instantiated.
And we should call ->detach on removal, too.

[sekharan: update as per comments from agk]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/md/dm-mpath.c                 | 13 +++++++
 drivers/scsi/device_handler/scsi_dh.c | 64 +++++++++++++++++++++++++++++++++++
 include/scsi/scsi_dh.h                | 10 ++++++
 3 files changed, 87 insertions(+)

diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index fea966d66f9..71dd65aa31b 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -147,9 +147,12 @@ static struct priority_group *alloc_priority_group(void)
 static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti)
 {
 	struct pgpath *pgpath, *tmp;
+	struct multipath *m = ti->private;
 
 	list_for_each_entry_safe(pgpath, tmp, pgpaths, list) {
 		list_del(&pgpath->list);
+		if (m->hw_handler_name)
+			scsi_dh_detach(bdev_get_queue(pgpath->path.dev->bdev));
 		dm_put_device(ti, pgpath->path.dev);
 		free_pgpath(pgpath);
 	}
@@ -548,6 +551,7 @@ static struct pgpath *parse_path(struct arg_set *as, struct path_selector *ps,
 {
 	int r;
 	struct pgpath *p;
+	struct multipath *m = ti->private;
 
 	/* we need at least a path arg */
 	if (as->argc < 1) {
@@ -566,6 +570,15 @@ static struct pgpath *parse_path(struct arg_set *as, struct path_selector *ps,
 		goto bad;
 	}
 
+	if (m->hw_handler_name) {
+		r = scsi_dh_attach(bdev_get_queue(p->path.dev->bdev),
+				   m->hw_handler_name);
+		if (r < 0) {
+			dm_put_device(ti, p->path.dev);
+			goto bad;
+		}
+	}
+
 	r = ps->type->add_path(ps, &p->path, as->argc, as->argv, &ti->error);
 	if (r) {
 		dm_put_device(ti, p->path.dev);
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index e90df9dd3e6..a9159681ff2 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -369,6 +369,70 @@ int scsi_dh_handler_exist(const char *name)
 }
 EXPORT_SYMBOL_GPL(scsi_dh_handler_exist);
 
+/*
+ * scsi_dh_handler_attach - Attach device handler
+ * @sdev - sdev the handler should be attached to
+ * @name - name of the handler to attach
+ */
+int scsi_dh_attach(struct request_queue *q, const char *name)
+{
+	unsigned long flags;
+	struct scsi_device *sdev;
+	struct scsi_device_handler *scsi_dh;
+	int err = 0;
+
+	scsi_dh = get_device_handler(name);
+	if (!scsi_dh)
+		return -EINVAL;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	sdev = q->queuedata;
+	if (!sdev || !get_device(&sdev->sdev_gendev))
+		err = -ENODEV;
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
+	if (!err) {
+		err = scsi_dh_handler_attach(sdev, scsi_dh);
+
+		put_device(&sdev->sdev_gendev);
+	}
+	return err;
+}
+EXPORT_SYMBOL_GPL(scsi_dh_attach);
+
+/*
+ * scsi_dh_handler_detach - Detach device handler
+ * @sdev - sdev the handler should be detached from
+ *
+ * This function will detach the device handler only
+ * if the sdev is not part of the internal list, ie
+ * if it has been attached manually.
+ */
+void scsi_dh_detach(struct request_queue *q)
+{
+	unsigned long flags;
+	struct scsi_device *sdev;
+	struct scsi_device_handler *scsi_dh = NULL;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+	sdev = q->queuedata;
+	if (!sdev || !get_device(&sdev->sdev_gendev))
+		sdev = NULL;
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
+	if (!sdev)
+		return;
+
+	if (sdev->scsi_dh_data) {
+		/* if sdev is not on internal list, detach */
+		scsi_dh = sdev->scsi_dh_data->scsi_dh;
+		if (!device_handler_match(scsi_dh, sdev))
+			scsi_dh_handler_detach(sdev, scsi_dh);
+	}
+	put_device(&sdev->sdev_gendev);
+}
+EXPORT_SYMBOL_GPL(scsi_dh_detach);
+
 static struct notifier_block scsi_dh_nb = {
 	.notifier_call = scsi_dh_notifier
 };
diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h
index e15e2aade69..33efce20c26 100644
--- a/include/scsi/scsi_dh.h
+++ b/include/scsi/scsi_dh.h
@@ -58,6 +58,8 @@ enum {
 #if defined(CONFIG_SCSI_DH) || defined(CONFIG_SCSI_DH_MODULE)
 extern int scsi_dh_activate(struct request_queue *);
 extern int scsi_dh_handler_exist(const char *);
+extern int scsi_dh_attach(struct request_queue *, const char *);
+extern void scsi_dh_detach(struct request_queue *);
 #else
 static inline int scsi_dh_activate(struct request_queue *req)
 {
@@ -67,4 +69,12 @@ static inline int scsi_dh_handler_exist(const char *name)
 {
 	return 0;
 }
+static inline int scsi_dh_attach(struct request_queue *req, const char *name)
+{
+	return SCSI_DH_NOSYS;
+}
+static inline void scsi_dh_detach(struct request_queue *q)
+{
+	return;
+}
 #endif
-- 
cgit v1.2.3


From 7c32c7a2d36c52d2b9ed040a9171364020ecc6a2 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 17 Jul 2008 16:53:33 -0700
Subject: [SCSI] scsi_dh: create lookup cache

Create a cache of devices that are seen in a system. This will avoid
the unnecessary traversal of the device list in the scsi_dh when there
are multiple luns of a same type.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/scsi_dh.c | 129 +++++++++++++++++++++++++++-------
 1 file changed, 105 insertions(+), 24 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index a9159681ff2..a518f2eff19 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -24,8 +24,16 @@
 #include <scsi/scsi_dh.h>
 #include "../scsi_priv.h"
 
+struct scsi_dh_devinfo_list {
+	struct list_head node;
+	char vendor[9];
+	char model[17];
+	struct scsi_device_handler *handler;
+};
+
 static DEFINE_SPINLOCK(list_lock);
 static LIST_HEAD(scsi_dh_list);
+static LIST_HEAD(scsi_dh_dev_list);
 
 static struct scsi_device_handler *get_device_handler(const char *name)
 {
@@ -42,21 +50,94 @@ static struct scsi_device_handler *get_device_handler(const char *name)
 	return found;
 }
 
-static int device_handler_match(struct scsi_device_handler *tmp,
-				struct scsi_device *sdev)
+
+static struct scsi_device_handler *
+scsi_dh_cache_lookup(struct scsi_device *sdev)
 {
-	int i;
-
-	for(i = 0; tmp->devlist[i].vendor; i++) {
-		if (!strncmp(sdev->vendor, tmp->devlist[i].vendor,
-			     strlen(tmp->devlist[i].vendor)) &&
-		    !strncmp(sdev->model, tmp->devlist[i].model,
-			     strlen(tmp->devlist[i].model))) {
-			return 1;
+	struct scsi_dh_devinfo_list *tmp;
+	struct scsi_device_handler *found_dh = NULL;
+
+	spin_lock(&list_lock);
+	list_for_each_entry(tmp, &scsi_dh_dev_list, node) {
+		if (!strncmp(sdev->vendor, tmp->vendor, strlen(tmp->vendor)) &&
+		    !strncmp(sdev->model, tmp->model, strlen(tmp->model))) {
+			found_dh = tmp->handler;
+			break;
 		}
 	}
+	spin_unlock(&list_lock);
 
-	return 0;
+	return found_dh;
+}
+
+static int scsi_dh_handler_lookup(struct scsi_device_handler *scsi_dh,
+				  struct scsi_device *sdev)
+{
+	int i, found = 0;
+
+	for(i = 0; scsi_dh->devlist[i].vendor; i++) {
+		if (!strncmp(sdev->vendor, scsi_dh->devlist[i].vendor,
+			     strlen(scsi_dh->devlist[i].vendor)) &&
+		    !strncmp(sdev->model, scsi_dh->devlist[i].model,
+			     strlen(scsi_dh->devlist[i].model))) {
+			found = 1;
+			break;
+		}
+	}
+	return found;
+}
+
+/*
+ * device_handler_match - Attach a device handler to a device
+ * @scsi_dh - The device handler to match against or NULL
+ * @sdev - SCSI device to be tested against @scsi_dh
+ *
+ * Tests @sdev against the device handler @scsi_dh or against
+ * all registered device_handler if @scsi_dh == NULL.
+ * Returns the found device handler or NULL if not found.
+ */
+static struct scsi_device_handler *
+device_handler_match(struct scsi_device_handler *scsi_dh,
+		     struct scsi_device *sdev)
+{
+	struct scsi_device_handler *found_dh = NULL;
+	struct scsi_dh_devinfo_list *tmp;
+
+	found_dh = scsi_dh_cache_lookup(sdev);
+	if (found_dh)
+		return found_dh;
+
+	if (scsi_dh) {
+		if (scsi_dh_handler_lookup(scsi_dh, sdev))
+			found_dh = scsi_dh;
+	} else {
+		struct scsi_device_handler *tmp_dh;
+
+		spin_lock(&list_lock);
+		list_for_each_entry(tmp_dh, &scsi_dh_list, list) {
+			if (scsi_dh_handler_lookup(tmp_dh, sdev))
+				found_dh = tmp_dh;
+		}
+		spin_unlock(&list_lock);
+	}
+
+	if (found_dh) { /* If device is found, add it to the cache */
+		tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+		if (tmp) {
+			strncpy(tmp->vendor, sdev->vendor, 8);
+			strncpy(tmp->model, sdev->model, 16);
+			tmp->vendor[8] = '\0';
+			tmp->model[16] = '\0';
+			tmp->handler = found_dh;
+			spin_lock(&list_lock);
+			list_add(&tmp->node, &scsi_dh_dev_list);
+			spin_unlock(&list_lock);
+		} else {
+			found_dh = NULL;
+		}
+	}
+
+	return found_dh;
 }
 
 /*
@@ -203,26 +284,18 @@ static int scsi_dh_notifier(struct notifier_block *nb,
 	struct device *dev = data;
 	struct scsi_device *sdev;
 	int err = 0;
-	struct scsi_device_handler *tmp, *devinfo = NULL;
+	struct scsi_device_handler *devinfo = NULL;
 
 	if (!scsi_is_sdev_device(dev))
 		return 0;
 
 	sdev = to_scsi_device(dev);
 
-	spin_lock(&list_lock);
-	list_for_each_entry(tmp, &scsi_dh_list, list) {
-		if (device_handler_match(tmp, sdev)) {
-			devinfo = tmp;
-			break;
-		}
-	}
-	spin_unlock(&list_lock);
-
-	if (!devinfo)
-		goto out;
-
 	if (action == BUS_NOTIFY_ADD_DEVICE) {
+		devinfo = device_handler_match(NULL, sdev);
+		if (!devinfo)
+			goto out;
+
 		err = scsi_dh_handler_attach(sdev, devinfo);
 		if (!err)
 			err = device_create_file(dev, &scsi_dh_state_attr);
@@ -312,6 +385,8 @@ EXPORT_SYMBOL_GPL(scsi_register_device_handler);
  */
 int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh)
 {
+	struct scsi_dh_devinfo_list *tmp, *pos;
+
 	if (!get_device_handler(scsi_dh->name))
 		return -ENODEV;
 
@@ -320,6 +395,12 @@ int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh)
 
 	spin_lock(&list_lock);
 	list_del(&scsi_dh->list);
+	list_for_each_entry_safe(pos, tmp, &scsi_dh_dev_list, node) {
+		if (pos->handler == scsi_dh) {
+			list_del(&pos->node);
+			kfree(pos);
+		}
+	}
 	spin_unlock(&list_lock);
 	printk(KERN_INFO "%s: device handler unregistered\n", scsi_dh->name);
 
-- 
cgit v1.2.3


From 4469f9878059f1707f021512e6b34252c4096ee7 Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Thu, 17 Jul 2008 04:28:30 -0400
Subject: [SCSI] Host protection capabilities

Controllers that support protection information must indicate this to
the SCSI midlayer so that the ULD can prepare scsi_cmnds accordingly.

This patch implements a host mask and various types of protection:

 - DIF Type 1-3 (between HBA and disk)
 - DIX Type 0-3 (between OS and HBA)

The patch also allows the HBA to set the guard type to something
different than the T10-mandated CRC.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_sysfs.c |  4 +++
 include/scsi/scsi_host.h  | 84 +++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 88 insertions(+)

diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index b6e56105977..ab3c71869be 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -249,6 +249,8 @@ shost_rd_attr(cmd_per_lun, "%hd\n");
 shost_rd_attr(can_queue, "%hd\n");
 shost_rd_attr(sg_tablesize, "%hu\n");
 shost_rd_attr(unchecked_isa_dma, "%d\n");
+shost_rd_attr(prot_capabilities, "%u\n");
+shost_rd_attr(prot_guard_type, "%hd\n");
 shost_rd_attr2(proc_name, hostt->proc_name, "%s\n");
 
 static struct attribute *scsi_sysfs_shost_attrs[] = {
@@ -263,6 +265,8 @@ static struct attribute *scsi_sysfs_shost_attrs[] = {
 	&dev_attr_hstate.attr,
 	&dev_attr_supported_mode.attr,
 	&dev_attr_active_mode.attr,
+	&dev_attr_prot_capabilities.attr,
+	&dev_attr_prot_guard_type.attr,
 	NULL
 };
 
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index d3b1e06fb14..44a55d1bf53 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -636,6 +636,10 @@ struct Scsi_Host {
 	 */
 	unsigned int max_host_blocked;
 
+	/* Protection Information */
+	unsigned int prot_capabilities;
+	unsigned char prot_guard_type;
+
 	/*
 	 * q used for scsi_tgt msgs, async events or any other requests that
 	 * need to be processed in userspace
@@ -756,6 +760,86 @@ extern struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost,
 extern void scsi_free_host_dev(struct scsi_device *);
 extern struct scsi_device *scsi_get_host_dev(struct Scsi_Host *);
 
+/*
+ * DIF defines the exchange of protection information between
+ * initiator and SBC block device.
+ *
+ * DIX defines the exchange of protection information between OS and
+ * initiator.
+ */
+enum scsi_host_prot_capabilities {
+	SHOST_DIF_TYPE1_PROTECTION = 1 << 0, /* T10 DIF Type 1 */
+	SHOST_DIF_TYPE2_PROTECTION = 1 << 1, /* T10 DIF Type 2 */
+	SHOST_DIF_TYPE3_PROTECTION = 1 << 2, /* T10 DIF Type 3 */
+
+	SHOST_DIX_TYPE0_PROTECTION = 1 << 3, /* DIX between OS and HBA only */
+	SHOST_DIX_TYPE1_PROTECTION = 1 << 4, /* DIX with DIF Type 1 */
+	SHOST_DIX_TYPE2_PROTECTION = 1 << 5, /* DIX with DIF Type 2 */
+	SHOST_DIX_TYPE3_PROTECTION = 1 << 6, /* DIX with DIF Type 3 */
+};
+
+/*
+ * SCSI hosts which support the Data Integrity Extensions must
+ * indicate their capabilities by setting the prot_capabilities using
+ * this call.
+ */
+static inline void scsi_host_set_prot(struct Scsi_Host *shost, unsigned int mask)
+{
+	shost->prot_capabilities = mask;
+}
+
+static inline unsigned int scsi_host_get_prot(struct Scsi_Host *shost)
+{
+	return shost->prot_capabilities;
+}
+
+static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+	switch (target_type) {
+	case 1: return shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION;
+	case 2: return shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION;
+	case 3: return shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION;
+	}
+
+	return 0;
+}
+
+static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+	switch (target_type) {
+	case 0: return shost->prot_capabilities & SHOST_DIX_TYPE0_PROTECTION;
+	case 1: return shost->prot_capabilities & SHOST_DIX_TYPE1_PROTECTION;
+	case 2: return shost->prot_capabilities & SHOST_DIX_TYPE2_PROTECTION;
+	case 3: return shost->prot_capabilities & SHOST_DIX_TYPE3_PROTECTION;
+	}
+
+	return 0;
+}
+
+/*
+ * All DIX-capable initiators must support the T10-mandated CRC
+ * checksum.  Controllers can optionally implement the IP checksum
+ * scheme which has much lower impact on system performance.  Note
+ * that the main rationale for the checksum is to match integrity
+ * metadata with data.  Detecting bit errors are a job for ECC memory
+ * and buses.
+ */
+
+enum scsi_host_guard_type {
+	SHOST_DIX_GUARD_CRC = 1 << 0,
+	SHOST_DIX_GUARD_IP  = 1 << 1,
+};
+
+static inline void scsi_host_set_guard(struct Scsi_Host *shost, unsigned char type)
+{
+	shost->prot_guard_type = type;
+}
+
+static inline unsigned char scsi_host_get_guard(struct Scsi_Host *shost)
+{
+	return shost->prot_guard_type;
+}
+
 /* legacy interfaces */
 extern struct Scsi_Host *scsi_register(struct scsi_host_template *, int);
 extern void scsi_unregister(struct Scsi_Host *);
-- 
cgit v1.2.3


From db007fc5e20c00b356e9ffe2d0e007398c65c837 Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Thu, 17 Jul 2008 04:28:31 -0400
Subject: [SCSI] Command protection operation

Controllers that support DMA of protection information must be told
explicitly how to handle the I/O.  The controller has no knowledge of
the protection capabilities of the target device so this information
must be passed in the scsi_cmnd.

 - The protection operation tells the HBA whether to generate, strip or
   verify protection information.

 - The protection type tells the HBA which layout the target is
   formatted with.  This is necessary because the controller must be
   able to correctly interpret the included protection information in
   order to verify it.

 - When a scsi_cmnd is reused for error handling the protection
   operation must be cleared and saved while error handling is in
   progress.

 - prot_op and prot_type are placed in an existing hole in scsi_cmnd
   and don't cause the structure to grow.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_error.c |  3 +++
 include/scsi/scsi_cmnd.h  | 66 +++++++++++++++++++++++++++++++++++++++++++++++
 include/scsi/scsi_eh.h    |  1 +
 3 files changed, 70 insertions(+)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 006a95916f7..a69397fd314 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -664,7 +664,9 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 	ses->sdb = scmd->sdb;
 	ses->next_rq = scmd->request->next_rq;
 	ses->result = scmd->result;
+	ses->prot_op = scmd->prot_op;
 
+	scmd->prot_op = SCSI_PROT_NORMAL;
 	scmd->cmnd = ses->eh_cmnd;
 	memset(scmd->cmnd, 0, BLK_MAX_CDB);
 	memset(&scmd->sdb, 0, sizeof(scmd->sdb));
@@ -722,6 +724,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 	scmd->sdb = ses->sdb;
 	scmd->request->next_rq = ses->next_rq;
 	scmd->result = ses->result;
+	scmd->prot_op = ses->prot_op;
 }
 EXPORT_SYMBOL(scsi_eh_restore_cmnd);
 
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 66c944849d6..402c1078d01 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -77,6 +77,9 @@ struct scsi_cmnd {
 	int allowed;
 	int timeout_per_command;
 
+	unsigned char prot_op;
+	unsigned char prot_type;
+
 	unsigned short cmd_len;
 	enum dma_data_direction sc_data_direction;
 
@@ -208,4 +211,67 @@ static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
 				 buf, buflen);
 }
 
+/*
+ * The operations below are hints that tell the controller driver how
+ * to handle I/Os with DIF or similar types of protection information.
+ */
+enum scsi_prot_operations {
+	/* Normal I/O */
+	SCSI_PROT_NORMAL = 0,
+
+	/* OS-HBA: Protected, HBA-Target: Unprotected */
+	SCSI_PROT_READ_INSERT,
+	SCSI_PROT_WRITE_STRIP,
+
+	/* OS-HBA: Unprotected, HBA-Target: Protected */
+	SCSI_PROT_READ_STRIP,
+	SCSI_PROT_WRITE_INSERT,
+
+	/* OS-HBA: Protected, HBA-Target: Protected */
+	SCSI_PROT_READ_PASS,
+	SCSI_PROT_WRITE_PASS,
+
+	/* OS-HBA: Protected, HBA-Target: Protected, checksum conversion */
+	SCSI_PROT_READ_CONVERT,
+	SCSI_PROT_WRITE_CONVERT,
+};
+
+static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
+{
+	scmd->prot_op = op;
+}
+
+static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_op;
+}
+
+/*
+ * The controller usually does not know anything about the target it
+ * is communicating with.  However, when DIX is enabled the controller
+ * must be know target type so it can verify the protection
+ * information passed along with the I/O.
+ */
+enum scsi_prot_target_type {
+	SCSI_PROT_DIF_TYPE0 = 0,
+	SCSI_PROT_DIF_TYPE1,
+	SCSI_PROT_DIF_TYPE2,
+	SCSI_PROT_DIF_TYPE3,
+};
+
+static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
+{
+	scmd->prot_type = type;
+}
+
+static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_type;
+}
+
+static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
+{
+	return scmd->request->sector;
+}
+
 #endif /* _SCSI_SCSI_CMND_H */
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index 2a9add21267..e5499ed0e37 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -75,6 +75,7 @@ struct scsi_eh_save {
 	int result;
 	enum dma_data_direction data_direction;
 	unsigned char cmd_len;
+	unsigned char prot_op;
 	unsigned char *cmnd;
 	struct scsi_data_buffer sdb;
 	struct request *next_rq;
-- 
cgit v1.2.3


From 7027ad72a689797475973c6feb5f0b673382f779 Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Thu, 17 Jul 2008 17:08:48 -0400
Subject: [SCSI] Support devices with protection information

Implement support for DMA of protection information for devices that
are data integrity capable.

 - Add support for mapping an extra scatter-gather list containing
   the protection information.

 - Allocate protection scsi_data_buffer if host is DIX (integrity DMA)
   capable.

 - Accessor function for checking whether a device has protection
   enabled.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi.c        | 36 ++++++++++++++++++++++++++++++++++--
 drivers/scsi/scsi_lib.c    | 25 ++++++++++++++++++++++++-
 drivers/scsi/scsi_priv.h   |  1 +
 include/scsi/scsi_cmnd.h   | 20 ++++++++++++++++++++
 include/scsi/scsi_device.h |  5 +++++
 5 files changed, 84 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 5276e73c58f..ee6be596503 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -197,10 +197,42 @@ static void
 scsi_pool_free_command(struct scsi_host_cmd_pool *pool,
 			 struct scsi_cmnd *cmd)
 {
+	if (cmd->prot_sdb)
+		kmem_cache_free(scsi_sdb_cache, cmd->prot_sdb);
+
 	kmem_cache_free(pool->sense_slab, cmd->sense_buffer);
 	kmem_cache_free(pool->cmd_slab, cmd);
 }
 
+/**
+ * scsi_host_alloc_command - internal function to allocate command
+ * @shost:	SCSI host whose pool to allocate from
+ * @gfp_mask:	mask for the allocation
+ *
+ * Returns a fully allocated command with sense buffer and protection
+ * data buffer (where applicable) or NULL on failure
+ */
+static struct scsi_cmnd *
+scsi_host_alloc_command(struct Scsi_Host *shost, gfp_t gfp_mask)
+{
+	struct scsi_cmnd *cmd;
+
+	cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask);
+	if (!cmd)
+		return NULL;
+
+	if (scsi_host_get_prot(shost) >= SHOST_DIX_TYPE0_PROTECTION) {
+		cmd->prot_sdb = kmem_cache_zalloc(scsi_sdb_cache, gfp_mask);
+
+		if (!cmd->prot_sdb) {
+			scsi_pool_free_command(shost->cmd_pool, cmd);
+			return NULL;
+		}
+	}
+
+	return cmd;
+}
+
 /**
  * __scsi_get_command - Allocate a struct scsi_cmnd
  * @shost: host to transmit command
@@ -214,7 +246,7 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask)
 	struct scsi_cmnd *cmd;
 	unsigned char *buf;
 
-	cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask);
+	cmd = scsi_host_alloc_command(shost, gfp_mask);
 
 	if (unlikely(!cmd)) {
 		unsigned long flags;
@@ -457,7 +489,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost)
 	/*
 	 * Get one backup command for this host.
 	 */
-	cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask);
+	cmd = scsi_host_alloc_command(shost, gfp_mask);
 	if (!cmd) {
 		scsi_put_host_cmd_pool(gfp_mask);
 		shost->cmd_pool = NULL;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fe77ccacf31..a47c05d7829 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -65,7 +65,7 @@ static struct scsi_host_sg_pool scsi_sg_pools[] = {
 };
 #undef SP
 
-static struct kmem_cache *scsi_sdb_cache;
+struct kmem_cache *scsi_sdb_cache;
 
 static void scsi_run_queue(struct request_queue *q);
 
@@ -787,6 +787,9 @@ void scsi_release_buffers(struct scsi_cmnd *cmd)
 		kmem_cache_free(scsi_sdb_cache, bidi_sdb);
 		cmd->request->next_rq->special = NULL;
 	}
+
+	if (scsi_prot_sg_count(cmd))
+		scsi_free_sgtable(cmd->prot_sdb);
 }
 EXPORT_SYMBOL(scsi_release_buffers);
 
@@ -1072,6 +1075,26 @@ int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask)
 			goto err_exit;
 	}
 
+	if (blk_integrity_rq(cmd->request)) {
+		struct scsi_data_buffer *prot_sdb = cmd->prot_sdb;
+		int ivecs, count;
+
+		BUG_ON(prot_sdb == NULL);
+		ivecs = blk_rq_count_integrity_sg(cmd->request);
+
+		if (scsi_alloc_sgtable(prot_sdb, ivecs, gfp_mask)) {
+			error = BLKPREP_DEFER;
+			goto err_exit;
+		}
+
+		count = blk_rq_map_integrity_sg(cmd->request,
+						prot_sdb->table.sgl);
+		BUG_ON(unlikely(count > ivecs));
+
+		cmd->prot_sdb = prot_sdb;
+		cmd->prot_sdb->table.nents = count;
+	}
+
 	return BLKPREP_OK ;
 
 err_exit:
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index b33e72516ef..79f0f751120 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -77,6 +77,7 @@ extern void scsi_exit_queue(void);
 struct request_queue;
 struct request;
 extern int scsi_prep_fn(struct request_queue *, struct request *);
+extern struct kmem_cache *scsi_sdb_cache;
 
 /* scsi_proc.c */
 #ifdef CONFIG_SCSI_PROC_FS
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 402c1078d01..f9f6e793575 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -90,6 +90,8 @@ struct scsi_cmnd {
 
 	/* These elements define the operation we ultimately want to perform */
 	struct scsi_data_buffer sdb;
+	struct scsi_data_buffer *prot_sdb;
+
 	unsigned underflow;	/* Return error if less than
 				   this amount is transferred */
 
@@ -274,4 +276,22 @@ static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
 	return scmd->request->sector;
 }
 
+static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
+}
+
+static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
+}
+
+static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb;
+}
+
+#define scsi_for_each_prot_sg(cmd, sg, nseg, __i)		\
+	for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
+
 #endif /* _SCSI_SCSI_CMND_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 4deb9349eeb..9cecc409f0f 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -423,6 +423,11 @@ static inline int scsi_device_enclosure(struct scsi_device *sdev)
 	return sdev->inquiry[6] & (1<<6);
 }
 
+static inline int scsi_device_protection(struct scsi_device *sdev)
+{
+	return sdev->inquiry[5] & (1<<0);
+}
+
 #define MODULE_ALIAS_SCSI_DEVICE(type) \
 	MODULE_ALIAS("scsi:t-" __stringify(type) "*")
 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
-- 
cgit v1.2.3


From 511e44f42e3239a4df77b8e0e46d294d98a768ad Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Thu, 17 Jul 2008 04:28:33 -0400
Subject: [SCSI] Do not retry a request whose data integrity check failed

If initiator or target reject the I/O due to DIF errors there is no
point in retrying.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_error.c | 3 +++
 drivers/scsi/scsi_lib.c   | 9 +++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index a69397fd314..fc4b2d05f2e 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -344,6 +344,9 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 		return /* soft_error */ SUCCESS;
 
 	case ABORTED_COMMAND:
+		if (sshdr.asc == 0x10) /* DIF */
+			return SUCCESS;
+
 		return NEEDS_RETRY;
 	case NOT_READY:
 	case UNIT_ATTENTION:
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index a47c05d7829..a20730c4802 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -950,9 +950,14 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 				 * 6-byte command.
 				 */
 				scsi_requeue_command(q, cmd);
-				return;
-			} else {
+			} else if (sshdr.asc == 0x10) /* DIX */
+				scsi_end_request(cmd, -EIO, this_count, 0);
+			else
 				scsi_end_request(cmd, -EIO, this_count, 1);
+			return;
+		case ABORTED_COMMAND:
+			if (sshdr.asc == 0x10) { /* DIF */
+				scsi_end_request(cmd, -EIO, this_count, 0);
 				return;
 			}
 			break;
-- 
cgit v1.2.3


From e0597d70012c82e16ee152270a55d89d8bf66693 Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Thu, 17 Jul 2008 04:28:34 -0400
Subject: [SCSI] sd: Identify DIF protection type and application tag ownership

If a disk is formatted with protection information (Inquiry bit
PROTECT=1) it is required to support Read Capacity(16).  Force use of
the 16-bit command in this case and extract the P_TYPE field which
indicates whether the disk is formatted using DIF Type 1, 2 or 3.

The ATO (App Tag Own) bit in the Control Mode Page indicates whether
the storage device or the initiator own the contents of the
DIF application tag.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/sd.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++--
 drivers/scsi/sd.h |  23 ++++++++++
 2 files changed, 141 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 99dddcae785..56b9501d12f 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -233,6 +233,24 @@ sd_show_allow_restart(struct device *dev, struct device_attribute *attr,
 	return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
 }
 
+static ssize_t
+sd_show_protection_type(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+	return snprintf(buf, 20, "%u\n", sdkp->protection_type);
+}
+
+static ssize_t
+sd_show_app_tag_own(struct device *dev, struct device_attribute *attr,
+		    char *buf)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+	return snprintf(buf, 20, "%u\n", sdkp->ATO);
+}
+
 static struct device_attribute sd_disk_attrs[] = {
 	__ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
 	       sd_store_cache_type),
@@ -241,6 +259,8 @@ static struct device_attribute sd_disk_attrs[] = {
 	       sd_store_allow_restart),
 	__ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop,
 	       sd_store_manage_start_stop),
+	__ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL),
+	__ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL),
 	__ATTR_NULL,
 };
 
@@ -1164,6 +1184,49 @@ sd_spinup_disk(struct scsi_disk *sdkp)
 	}
 }
 
+
+/*
+ * Determine whether disk supports Data Integrity Field.
+ */
+void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+	struct scsi_device *sdp = sdkp->device;
+	u8 type;
+
+	if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
+		type = 0;
+	else
+		type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
+
+	switch (type) {
+	case SD_DIF_TYPE0_PROTECTION:
+		sdkp->protection_type = 0;
+		break;
+
+	case SD_DIF_TYPE1_PROTECTION:
+	case SD_DIF_TYPE3_PROTECTION:
+		sdkp->protection_type = type;
+		break;
+
+	case SD_DIF_TYPE2_PROTECTION:
+		sd_printk(KERN_ERR, sdkp, "formatted with DIF Type 2 "	\
+			  "protection which is currently unsupported. "	\
+			  "Disabling disk!\n");
+		goto disable;
+
+	default:
+		sd_printk(KERN_ERR, sdkp, "formatted with unknown "	\
+			  "protection type %d. Disabling disk!\n", type);
+		goto disable;
+	}
+
+	return;
+
+disable:
+	sdkp->protection_type = 0;
+	sdkp->capacity = 0;
+}
+
 /*
  * read disk capacity
  */
@@ -1173,7 +1236,8 @@ sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
 	unsigned char cmd[16];
 	int the_result, retries;
 	int sector_size = 0;
-	int longrc = 0;
+	/* Force READ CAPACITY(16) when PROTECT=1 */
+	int longrc = scsi_device_protection(sdkp->device) ? 1 : 0;
 	struct scsi_sense_hdr sshdr;
 	int sense_valid = 0;
 	struct scsi_device *sdp = sdkp->device;
@@ -1185,8 +1249,8 @@ repeat:
 			memset((void *) cmd, 0, 16);
 			cmd[0] = SERVICE_ACTION_IN;
 			cmd[1] = SAI_READ_CAPACITY_16;
-			cmd[13] = 12;
-			memset((void *) buffer, 0, 12);
+			cmd[13] = 13;
+			memset((void *) buffer, 0, 13);
 		} else {
 			cmd[0] = READ_CAPACITY;
 			memset((void *) &cmd[1], 0, 9);
@@ -1194,7 +1258,7 @@ repeat:
 		}
 		
 		the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
-					      buffer, longrc ? 12 : 8, &sshdr,
+					      buffer, longrc ? 13 : 8, &sshdr,
 					      SD_TIMEOUT, SD_MAX_RETRIES);
 
 		if (media_not_present(sdkp, &sshdr))
@@ -1269,6 +1333,8 @@ repeat:
 			
 		sector_size = (buffer[8] << 24) |
 			(buffer[9] << 16) | (buffer[10] << 8) | buffer[11];
+
+		sd_read_protection_type(sdkp, buffer);
 	}	
 
 	/* Some devices return the total number of sectors, not the
@@ -1530,6 +1596,52 @@ defaults:
 	sdkp->DPOFUA = 0;
 }
 
+/*
+ * The ATO bit indicates whether the DIF application tag is available
+ * for use by the operating system.
+ */
+void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+	int res, offset;
+	struct scsi_device *sdp = sdkp->device;
+	struct scsi_mode_data data;
+	struct scsi_sense_hdr sshdr;
+
+	if (sdp->type != TYPE_DISK)
+		return;
+
+	if (sdkp->protection_type == 0)
+		return;
+
+	res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
+			      SD_MAX_RETRIES, &data, &sshdr);
+
+	if (!scsi_status_is_good(res) || !data.header_length ||
+	    data.length < 6) {
+		sd_printk(KERN_WARNING, sdkp,
+			  "getting Control mode page failed, assume no ATO\n");
+
+		if (scsi_sense_valid(&sshdr))
+			sd_print_sense_hdr(sdkp, &sshdr);
+
+		return;
+	}
+
+	offset = data.header_length + data.block_descriptor_length;
+
+	if ((buffer[offset] & 0x3f) != 0x0a) {
+		sd_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
+		return;
+	}
+
+	if ((buffer[offset + 5] & 0x80) == 0)
+		return;
+
+	sdkp->ATO = 1;
+
+	return;
+}
+
 /**
  *	sd_revalidate_disk - called the first time a new disk is seen,
  *	performs disk spin up, read_capacity, etc.
@@ -1566,6 +1678,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
 	sdkp->write_prot = 0;
 	sdkp->WCE = 0;
 	sdkp->RCD = 0;
+	sdkp->ATO = 0;
 
 	sd_spinup_disk(sdkp);
 
@@ -1577,6 +1690,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
 		sd_read_capacity(sdkp, buffer);
 		sd_read_write_protect_flag(sdkp, buffer);
 		sd_read_cache_type(sdkp, buffer);
+		sd_read_app_tag_own(sdkp, buffer);
 	}
 
 	/*
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 03a3d45cfa4..86b18d4170f 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -41,7 +41,9 @@ struct scsi_disk {
 	u32		index;
 	u8		media_present;
 	u8		write_prot;
+	u8		protection_type;/* Data Integrity Field */
 	unsigned	previous_state : 1;
+	unsigned	ATO : 1;	/* state of disk ATO bit */
 	unsigned	WCE : 1;	/* state of disk WCE bit */
 	unsigned	RCD : 1;	/* state of disk RCD bit, unused */
 	unsigned	DPOFUA : 1;	/* state of disk DPOFUA bit */
@@ -59,4 +61,25 @@ static inline struct scsi_disk *scsi_disk(struct gendisk *disk)
 		    (sdsk)->disk->disk_name, ##a) :			\
 	sdev_printk(prefix, (sdsk)->device, fmt, ##a)
 
+/*
+ * A DIF-capable target device can be formatted with different
+ * protection schemes.  Currently 0 through 3 are defined:
+ *
+ * Type 0 is regular (unprotected) I/O
+ *
+ * Type 1 defines the contents of the guard and reference tags
+ *
+ * Type 2 defines the contents of the guard and reference tags and
+ * uses 32-byte commands to seed the latter
+ *
+ * Type 3 defines the contents of the guard tag only
+ */
+
+enum sd_dif_target_protection_types {
+	SD_DIF_TYPE0_PROTECTION = 0x0,
+	SD_DIF_TYPE1_PROTECTION = 0x1,
+	SD_DIF_TYPE2_PROTECTION = 0x2,
+	SD_DIF_TYPE3_PROTECTION = 0x3,
+};
+
 #endif /* _SCSI_DISK_H */
-- 
cgit v1.2.3


From af55ff675a8461da6a632320710b050af4366e0c Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Thu, 17 Jul 2008 04:28:35 -0400
Subject: [SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field

Support for controllers and disks that implement DIF protection
information:

 - During command preparation the RDPROTECT/WRPROTECT must be set
   correctly if the target has DIF enabled.

 - READ(6) and WRITE(6) are not supported when DIF is on.

 - The controller must be told how to handle the I/O via the
   protection operation field in scsi_cmnd.

 - Refactor the I/O completion code that extracts failed LBA from the
   returned sense data and handle DIF failures correctly.

 - sd_dif.c implements the functions required to prepare and complete
   requests with protection information attached.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/Kconfig  |   1 +
 drivers/scsi/Makefile |   2 +
 drivers/scsi/sd.c     | 121 ++++++++----
 drivers/scsi/sd.h     |  25 +++
 drivers/scsi/sd_dif.c | 538 ++++++++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 647 insertions(+), 40 deletions(-)
 create mode 100644 drivers/scsi/sd_dif.c

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 26be540d1dd..c7f06298bd3 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -63,6 +63,7 @@ comment "SCSI support type (disk, tape, CD-ROM)"
 config BLK_DEV_SD
 	tristate "SCSI disk support"
 	depends on SCSI
+	select CRC_T10DIF
 	---help---
 	  If you want to use SCSI hard disks, Fibre Channel disks,
 	  Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index a8149677de2..72fd5043cfa 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -151,6 +151,8 @@ scsi_mod-$(CONFIG_SCSI_PROC_FS)	+= scsi_proc.o
 scsi_tgt-y			+= scsi_tgt_lib.o scsi_tgt_if.o
 
 sd_mod-objs	:= sd.o
+sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o
+
 sr_mod-objs	:= sr.o sr_ioctl.o sr_vendor.o
 ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
 		:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 56b9501d12f..8e08d51a0f0 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -373,6 +373,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	struct scsi_cmnd *SCpnt;
 	struct scsi_device *sdp = q->queuedata;
 	struct gendisk *disk = rq->rq_disk;
+	struct scsi_disk *sdkp;
 	sector_t block = rq->sector;
 	unsigned int this_count = rq->nr_sectors;
 	unsigned int timeout = sdp->timeout;
@@ -389,6 +390,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	if (ret != BLKPREP_OK)
 		goto out;
 	SCpnt = rq->special;
+	sdkp = scsi_disk(disk);
 
 	/* from here on until we're complete, any goto out
 	 * is used for a killable error condition */
@@ -478,6 +480,11 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 		}
 		SCpnt->cmnd[0] = WRITE_6;
 		SCpnt->sc_data_direction = DMA_TO_DEVICE;
+
+		if (blk_integrity_rq(rq) &&
+		    sd_dif_prepare(rq, block, sdp->sector_size) == -EIO)
+			goto out;
+
 	} else if (rq_data_dir(rq) == READ) {
 		SCpnt->cmnd[0] = READ_6;
 		SCpnt->sc_data_direction = DMA_FROM_DEVICE;
@@ -492,8 +499,12 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 					"writing" : "reading", this_count,
 					rq->nr_sectors));
 
-	SCpnt->cmnd[1] = 0;
-	
+	/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
+	if (scsi_host_dif_capable(sdp->host, sdkp->protection_type))
+		SCpnt->cmnd[1] = 1 << 5;
+	else
+		SCpnt->cmnd[1] = 0;
+
 	if (block > 0xffffffff) {
 		SCpnt->cmnd[0] += READ_16 - READ_6;
 		SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
@@ -511,6 +522,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 		SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
 		SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
 	} else if ((this_count > 0xff) || (block > 0x1fffff) ||
+		   scsi_device_protection(SCpnt->device) ||
 		   SCpnt->device->use_10_for_rw) {
 		if (this_count > 0xffff)
 			this_count = 0xffff;
@@ -545,6 +557,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	}
 	SCpnt->sdb.length = this_count * sdp->sector_size;
 
+	/* If DIF or DIX is enabled, tell HBA how to handle request */
+	if (sdkp->protection_type || scsi_prot_sg_count(SCpnt))
+		sd_dif_op(SCpnt, sdkp->protection_type, scsi_prot_sg_count(SCpnt));
+
 	/*
 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
 	 * host adapter, it's safe to assume that we can at least transfer
@@ -939,6 +955,48 @@ static struct block_device_operations sd_fops = {
 	.revalidate_disk	= sd_revalidate_disk,
 };
 
+static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
+{
+	u64 start_lba = scmd->request->sector;
+	u64 end_lba = scmd->request->sector + (scsi_bufflen(scmd) / 512);
+	u64 bad_lba;
+	int info_valid;
+
+	if (!blk_fs_request(scmd->request))
+		return 0;
+
+	info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
+					     SCSI_SENSE_BUFFERSIZE,
+					     &bad_lba);
+	if (!info_valid)
+		return 0;
+
+	if (scsi_bufflen(scmd) <= scmd->device->sector_size)
+		return 0;
+
+	if (scmd->device->sector_size < 512) {
+		/* only legitimate sector_size here is 256 */
+		start_lba <<= 1;
+		end_lba <<= 1;
+	} else {
+		/* be careful ... don't want any overflows */
+		u64 factor = scmd->device->sector_size / 512;
+		do_div(start_lba, factor);
+		do_div(end_lba, factor);
+	}
+
+	/* The bad lba was reported incorrectly, we have no idea where
+	 * the error is.
+	 */
+	if (bad_lba < start_lba  || bad_lba >= end_lba)
+		return 0;
+
+	/* This computation should always be done in terms of
+	 * the resolution of the device's medium.
+	 */
+	return (bad_lba - start_lba) * scmd->device->sector_size;
+}
+
 /**
  *	sd_done - bottom half handler: called when the lower level
  *	driver has completed (successfully or otherwise) a scsi command.
@@ -949,15 +1007,10 @@ static struct block_device_operations sd_fops = {
 static int sd_done(struct scsi_cmnd *SCpnt)
 {
 	int result = SCpnt->result;
-	unsigned int xfer_size = scsi_bufflen(SCpnt);
- 	unsigned int good_bytes = result ? 0 : xfer_size;
- 	u64 start_lba = SCpnt->request->sector;
-	u64 end_lba = SCpnt->request->sector + (xfer_size / 512);
- 	u64 bad_lba;
+	unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
 	struct scsi_sense_hdr sshdr;
 	int sense_valid = 0;
 	int sense_deferred = 0;
-	int info_valid;
 
 	if (result) {
 		sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
@@ -982,36 +1035,7 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	switch (sshdr.sense_key) {
 	case HARDWARE_ERROR:
 	case MEDIUM_ERROR:
-		if (!blk_fs_request(SCpnt->request))
-			goto out;
-		info_valid = scsi_get_sense_info_fld(SCpnt->sense_buffer,
-						     SCSI_SENSE_BUFFERSIZE,
-						     &bad_lba);
-		if (!info_valid)
-			goto out;
-		if (xfer_size <= SCpnt->device->sector_size)
-			goto out;
-		if (SCpnt->device->sector_size < 512) {
-			/* only legitimate sector_size here is 256 */
-			start_lba <<= 1;
-			end_lba <<= 1;
-		} else {
-			/* be careful ... don't want any overflows */
-			u64 factor = SCpnt->device->sector_size / 512;
-			do_div(start_lba, factor);
-			do_div(end_lba, factor);
-		}
-
-		if (bad_lba < start_lba  || bad_lba >= end_lba)
-			/* the bad lba was reported incorrectly, we have
-			 * no idea where the error is
-			 */
-			goto out;
-
-		/* This computation should always be done in terms of
-		 * the resolution of the device's medium.
-		 */
-		good_bytes = (bad_lba - start_lba)*SCpnt->device->sector_size;
+		good_bytes = sd_completed_bytes(SCpnt);
 		break;
 	case RECOVERED_ERROR:
 	case NO_SENSE:
@@ -1021,10 +1045,23 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 		scsi_print_sense("sd", SCpnt);
 		SCpnt->result = 0;
 		memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-		good_bytes = xfer_size;
+		good_bytes = scsi_bufflen(SCpnt);
+		break;
+	case ABORTED_COMMAND:
+		if (sshdr.asc == 0x10) { /* DIF: Disk detected corruption */
+			scsi_print_result(SCpnt);
+			scsi_print_sense("sd", SCpnt);
+			good_bytes = sd_completed_bytes(SCpnt);
+		}
 		break;
 	case ILLEGAL_REQUEST:
-		if (SCpnt->device->use_10_for_rw &&
+		if (sshdr.asc == 0x10) { /* DIX: HBA detected corruption */
+			scsi_print_result(SCpnt);
+			scsi_print_sense("sd", SCpnt);
+			good_bytes = sd_completed_bytes(SCpnt);
+		}
+		if (!scsi_device_protection(SCpnt->device) &&
+		    SCpnt->device->use_10_for_rw &&
 		    (SCpnt->cmnd[0] == READ_10 ||
 		     SCpnt->cmnd[0] == WRITE_10))
 			SCpnt->device->use_10_for_rw = 0;
@@ -1037,6 +1074,9 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 		break;
 	}
  out:
+	if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
+		sd_dif_complete(SCpnt, good_bytes);
+
 	return good_bytes;
 }
 
@@ -1826,6 +1866,7 @@ static int sd_probe(struct device *dev)
 
 	dev_set_drvdata(dev, sdkp);
 	add_disk(gd);
+	sd_dif_config_host(sdkp);
 
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
 		  sdp->removable ? "removable " : "");
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 86b18d4170f..550b2f70a1f 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -82,4 +82,29 @@ enum sd_dif_target_protection_types {
 	SD_DIF_TYPE3_PROTECTION = 0x3,
 };
 
+/*
+ * Data Integrity Field tuple.
+ */
+struct sd_dif_tuple {
+       __be16 guard_tag;	/* Checksum */
+       __be16 app_tag;		/* Opaque storage */
+       __be32 ref_tag;		/* Target LBA or indirect LBA */
+};
+
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+
+extern void sd_dif_op(struct scsi_cmnd *, unsigned int, unsigned int);
+extern void sd_dif_config_host(struct scsi_disk *);
+extern int sd_dif_prepare(struct request *rq, sector_t, unsigned int);
+extern void sd_dif_complete(struct scsi_cmnd *, unsigned int);
+
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+
+#define sd_dif_op(a, b, c)			do { } while (0)
+#define sd_dif_config_host(a)			do { } while (0)
+#define sd_dif_prepare(a, b, c)			(0)
+#define sd_dif_complete(a, b)			(0)
+
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
+
 #endif /* _SCSI_DISK_H */
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
new file mode 100644
index 00000000000..4d17f3d35aa
--- /dev/null
+++ b/drivers/scsi/sd_dif.c
@@ -0,0 +1,538 @@
+/*
+ * sd_dif.c - SCSI Data Integrity Field
+ *
+ * Copyright (C) 2007, 2008 Oracle Corporation
+ * Written by: Martin K. Petersen <martin.petersen@oracle.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
+ * USA.
+ *
+ */
+
+#include <linux/blkdev.h>
+#include <linux/crc-t10dif.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_ioctl.h>
+#include <scsi/scsicam.h>
+
+#include <net/checksum.h>
+
+#include "sd.h"
+
+typedef __u16 (csum_fn) (void *, unsigned int);
+
+static __u16 sd_dif_crc_fn(void *data, unsigned int len)
+{
+	return cpu_to_be16(crc_t10dif(data, len));
+}
+
+static __u16 sd_dif_ip_fn(void *data, unsigned int len)
+{
+	return ip_compute_csum(data, len);
+}
+
+/*
+ * Type 1 and Type 2 protection use the same format: 16 bit guard tag,
+ * 16 bit app tag, 32 bit reference tag.
+ */
+static void sd_dif_type1_generate(struct blk_integrity_exchg *bix, csum_fn *fn)
+{
+	void *buf = bix->data_buf;
+	struct sd_dif_tuple *sdt = bix->prot_buf;
+	sector_t sector = bix->sector;
+	unsigned int i;
+
+	for (i = 0 ; i < bix->data_size ; i += bix->sector_size, sdt++) {
+		sdt->guard_tag = fn(buf, bix->sector_size);
+		sdt->ref_tag = cpu_to_be32(sector & 0xffffffff);
+		sdt->app_tag = 0;
+
+		buf += bix->sector_size;
+		sector++;
+	}
+}
+
+static void sd_dif_type1_generate_crc(struct blk_integrity_exchg *bix)
+{
+	sd_dif_type1_generate(bix, sd_dif_crc_fn);
+}
+
+static void sd_dif_type1_generate_ip(struct blk_integrity_exchg *bix)
+{
+	sd_dif_type1_generate(bix, sd_dif_ip_fn);
+}
+
+static int sd_dif_type1_verify(struct blk_integrity_exchg *bix, csum_fn *fn)
+{
+	void *buf = bix->data_buf;
+	struct sd_dif_tuple *sdt = bix->prot_buf;
+	sector_t sector = bix->sector;
+	unsigned int i;
+	__u16 csum;
+
+	for (i = 0 ; i < bix->data_size ; i += bix->sector_size, sdt++) {
+		/* Unwritten sectors */
+		if (sdt->app_tag == 0xffff)
+			return 0;
+
+		/* Bad ref tag received from disk */
+		if (sdt->ref_tag == 0xffffffff) {
+			printk(KERN_ERR
+			       "%s: bad phys ref tag on sector %lu\n",
+			       bix->disk_name, (unsigned long)sector);
+			return -EIO;
+		}
+
+		if (be32_to_cpu(sdt->ref_tag) != (sector & 0xffffffff)) {
+			printk(KERN_ERR
+			       "%s: ref tag error on sector %lu (rcvd %u)\n",
+			       bix->disk_name, (unsigned long)sector,
+			       be32_to_cpu(sdt->ref_tag));
+			return -EIO;
+		}
+
+		csum = fn(buf, bix->sector_size);
+
+		if (sdt->guard_tag != csum) {
+			printk(KERN_ERR "%s: guard tag error on sector %lu " \
+			       "(rcvd %04x, data %04x)\n", bix->disk_name,
+			       (unsigned long)sector,
+			       be16_to_cpu(sdt->guard_tag), be16_to_cpu(csum));
+			return -EIO;
+		}
+
+		buf += bix->sector_size;
+		sector++;
+	}
+
+	return 0;
+}
+
+static int sd_dif_type1_verify_crc(struct blk_integrity_exchg *bix)
+{
+	return sd_dif_type1_verify(bix, sd_dif_crc_fn);
+}
+
+static int sd_dif_type1_verify_ip(struct blk_integrity_exchg *bix)
+{
+	return sd_dif_type1_verify(bix, sd_dif_ip_fn);
+}
+
+/*
+ * Functions for interleaving and deinterleaving application tags
+ */
+static void sd_dif_type1_set_tag(void *prot, void *tag_buf, unsigned int sectors)
+{
+	struct sd_dif_tuple *sdt = prot;
+	char *tag = tag_buf;
+	unsigned int i, j;
+
+	for (i = 0, j = 0 ; i < sectors ; i++, j += 2, sdt++) {
+		sdt->app_tag = tag[j] << 8 | tag[j+1];
+		BUG_ON(sdt->app_tag == 0xffff);
+	}
+}
+
+static void sd_dif_type1_get_tag(void *prot, void *tag_buf, unsigned int sectors)
+{
+	struct sd_dif_tuple *sdt = prot;
+	char *tag = tag_buf;
+	unsigned int i, j;
+
+	for (i = 0, j = 0 ; i < sectors ; i++, j += 2, sdt++) {
+		tag[j] = (sdt->app_tag & 0xff00) >> 8;
+		tag[j+1] = sdt->app_tag & 0xff;
+	}
+}
+
+static struct blk_integrity dif_type1_integrity_crc = {
+	.name			= "T10-DIF-TYPE1-CRC",
+	.generate_fn		= sd_dif_type1_generate_crc,
+	.verify_fn		= sd_dif_type1_verify_crc,
+	.get_tag_fn		= sd_dif_type1_get_tag,
+	.set_tag_fn		= sd_dif_type1_set_tag,
+	.tuple_size		= sizeof(struct sd_dif_tuple),
+	.tag_size		= 0,
+};
+
+static struct blk_integrity dif_type1_integrity_ip = {
+	.name			= "T10-DIF-TYPE1-IP",
+	.generate_fn		= sd_dif_type1_generate_ip,
+	.verify_fn		= sd_dif_type1_verify_ip,
+	.get_tag_fn		= sd_dif_type1_get_tag,
+	.set_tag_fn		= sd_dif_type1_set_tag,
+	.tuple_size		= sizeof(struct sd_dif_tuple),
+	.tag_size		= 0,
+};
+
+
+/*
+ * Type 3 protection has a 16-bit guard tag and 16 + 32 bits of opaque
+ * tag space.
+ */
+static void sd_dif_type3_generate(struct blk_integrity_exchg *bix, csum_fn *fn)
+{
+	void *buf = bix->data_buf;
+	struct sd_dif_tuple *sdt = bix->prot_buf;
+	unsigned int i;
+
+	for (i = 0 ; i < bix->data_size ; i += bix->sector_size, sdt++) {
+		sdt->guard_tag = fn(buf, bix->sector_size);
+		sdt->ref_tag = 0;
+		sdt->app_tag = 0;
+
+		buf += bix->sector_size;
+	}
+}
+
+static void sd_dif_type3_generate_crc(struct blk_integrity_exchg *bix)
+{
+	sd_dif_type3_generate(bix, sd_dif_crc_fn);
+}
+
+static void sd_dif_type3_generate_ip(struct blk_integrity_exchg *bix)
+{
+	sd_dif_type3_generate(bix, sd_dif_ip_fn);
+}
+
+static int sd_dif_type3_verify(struct blk_integrity_exchg *bix, csum_fn *fn)
+{
+	void *buf = bix->data_buf;
+	struct sd_dif_tuple *sdt = bix->prot_buf;
+	sector_t sector = bix->sector;
+	unsigned int i;
+	__u16 csum;
+
+	for (i = 0 ; i < bix->data_size ; i += bix->sector_size, sdt++) {
+		/* Unwritten sectors */
+		if (sdt->app_tag == 0xffff && sdt->ref_tag == 0xffffffff)
+			return 0;
+
+		csum = fn(buf, bix->sector_size);
+
+		if (sdt->guard_tag != csum) {
+			printk(KERN_ERR "%s: guard tag error on sector %lu " \
+			       "(rcvd %04x, data %04x)\n", bix->disk_name,
+			       (unsigned long)sector,
+			       be16_to_cpu(sdt->guard_tag), be16_to_cpu(csum));
+			return -EIO;
+		}
+
+		buf += bix->sector_size;
+		sector++;
+	}
+
+	return 0;
+}
+
+static int sd_dif_type3_verify_crc(struct blk_integrity_exchg *bix)
+{
+	return sd_dif_type3_verify(bix, sd_dif_crc_fn);
+}
+
+static int sd_dif_type3_verify_ip(struct blk_integrity_exchg *bix)
+{
+	return sd_dif_type3_verify(bix, sd_dif_ip_fn);
+}
+
+static void sd_dif_type3_set_tag(void *prot, void *tag_buf, unsigned int sectors)
+{
+	struct sd_dif_tuple *sdt = prot;
+	char *tag = tag_buf;
+	unsigned int i, j;
+
+	for (i = 0, j = 0 ; i < sectors ; i++, j += 6, sdt++) {
+		sdt->app_tag = tag[j] << 8 | tag[j+1];
+		sdt->ref_tag = tag[j+2] << 24 | tag[j+3] << 16 |
+			tag[j+4] << 8 | tag[j+5];
+	}
+}
+
+static void sd_dif_type3_get_tag(void *prot, void *tag_buf, unsigned int sectors)
+{
+	struct sd_dif_tuple *sdt = prot;
+	char *tag = tag_buf;
+	unsigned int i, j;
+
+	for (i = 0, j = 0 ; i < sectors ; i++, j += 2, sdt++) {
+		tag[j] = (sdt->app_tag & 0xff00) >> 8;
+		tag[j+1] = sdt->app_tag & 0xff;
+		tag[j+2] = (sdt->ref_tag & 0xff000000) >> 24;
+		tag[j+3] = (sdt->ref_tag & 0xff0000) >> 16;
+		tag[j+4] = (sdt->ref_tag & 0xff00) >> 8;
+		tag[j+5] = sdt->ref_tag & 0xff;
+		BUG_ON(sdt->app_tag == 0xffff || sdt->ref_tag == 0xffffffff);
+	}
+}
+
+static struct blk_integrity dif_type3_integrity_crc = {
+	.name			= "T10-DIF-TYPE3-CRC",
+	.generate_fn		= sd_dif_type3_generate_crc,
+	.verify_fn		= sd_dif_type3_verify_crc,
+	.get_tag_fn		= sd_dif_type3_get_tag,
+	.set_tag_fn		= sd_dif_type3_set_tag,
+	.tuple_size		= sizeof(struct sd_dif_tuple),
+	.tag_size		= 0,
+};
+
+static struct blk_integrity dif_type3_integrity_ip = {
+	.name			= "T10-DIF-TYPE3-IP",
+	.generate_fn		= sd_dif_type3_generate_ip,
+	.verify_fn		= sd_dif_type3_verify_ip,
+	.get_tag_fn		= sd_dif_type3_get_tag,
+	.set_tag_fn		= sd_dif_type3_set_tag,
+	.tuple_size		= sizeof(struct sd_dif_tuple),
+	.tag_size		= 0,
+};
+
+/*
+ * Configure exchange of protection information between OS and HBA.
+ */
+void sd_dif_config_host(struct scsi_disk *sdkp)
+{
+	struct scsi_device *sdp = sdkp->device;
+	struct gendisk *disk = sdkp->disk;
+	u8 type = sdkp->protection_type;
+
+	/* If this HBA doesn't support DIX, resort to normal I/O or DIF */
+	if (scsi_host_dix_capable(sdp->host, type) == 0) {
+
+		if (type == SD_DIF_TYPE0_PROTECTION)
+			return;
+
+		if (scsi_host_dif_capable(sdp->host, type) == 0) {
+			sd_printk(KERN_INFO, sdkp, "Type %d protection " \
+				  "unsupported by HBA. Disabling DIF.\n", type);
+			sdkp->protection_type = 0;
+			return;
+		}
+
+		sd_printk(KERN_INFO, sdkp, "Enabling DIF Type %d protection\n",
+			  type);
+
+		return;
+	}
+
+	/* Enable DMA of protection information */
+	if (scsi_host_get_guard(sdkp->device->host) & SHOST_DIX_GUARD_IP)
+		if (type == SD_DIF_TYPE3_PROTECTION)
+			blk_integrity_register(disk, &dif_type3_integrity_ip);
+		else
+			blk_integrity_register(disk, &dif_type1_integrity_ip);
+	else
+		if (type == SD_DIF_TYPE3_PROTECTION)
+			blk_integrity_register(disk, &dif_type3_integrity_crc);
+		else
+			blk_integrity_register(disk, &dif_type1_integrity_crc);
+
+	sd_printk(KERN_INFO, sdkp,
+		  "Enabling %s integrity protection\n", disk->integrity->name);
+
+	/* Signal to block layer that we support sector tagging */
+	if (type && sdkp->ATO) {
+		if (type == SD_DIF_TYPE3_PROTECTION)
+			disk->integrity->tag_size = sizeof(u16) + sizeof(u32);
+		else
+			disk->integrity->tag_size = sizeof(u16);
+
+		sd_printk(KERN_INFO, sdkp, "DIF application tag size %u\n",
+			  disk->integrity->tag_size);
+	}
+}
+
+/*
+ * DIF DMA operation magic decoder ring.
+ */
+void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix)
+{
+	int csum_convert, prot_op;
+
+	prot_op = 0;
+
+	/* Convert checksum? */
+	if (scsi_host_get_guard(scmd->device->host) != SHOST_DIX_GUARD_CRC)
+		csum_convert = 1;
+	else
+		csum_convert = 0;
+
+	switch (scmd->cmnd[0]) {
+	case READ_10:
+	case READ_12:
+	case READ_16:
+		if (dif && dix)
+			if (csum_convert)
+				prot_op = SCSI_PROT_READ_CONVERT;
+			else
+				prot_op = SCSI_PROT_READ_PASS;
+		else if (dif && !dix)
+			prot_op = SCSI_PROT_READ_STRIP;
+		else if (!dif && dix)
+			prot_op = SCSI_PROT_READ_INSERT;
+
+		break;
+
+	case WRITE_10:
+	case WRITE_12:
+	case WRITE_16:
+		if (dif && dix)
+			if (csum_convert)
+				prot_op = SCSI_PROT_WRITE_CONVERT;
+			else
+				prot_op = SCSI_PROT_WRITE_PASS;
+		else if (dif && !dix)
+			prot_op = SCSI_PROT_WRITE_INSERT;
+		else if (!dif && dix)
+			prot_op = SCSI_PROT_WRITE_STRIP;
+
+		break;
+	}
+
+	scsi_set_prot_op(scmd, prot_op);
+	scsi_set_prot_type(scmd, dif);
+}
+
+/*
+ * The virtual start sector is the one that was originally submitted
+ * by the block layer.	Due to partitioning, MD/DM cloning, etc. the
+ * actual physical start sector is likely to be different.  Remap
+ * protection information to match the physical LBA.
+ *
+ * From a protocol perspective there's a slight difference between
+ * Type 1 and 2.  The latter uses 32-byte CDBs exclusively, and the
+ * reference tag is seeded in the CDB.  This gives us the potential to
+ * avoid virt->phys remapping during write.  However, at read time we
+ * don't know whether the virt sector is the same as when we wrote it
+ * (we could be reading from real disk as opposed to MD/DM device.  So
+ * we always remap Type 2 making it identical to Type 1.
+ *
+ * Type 3 does not have a reference tag so no remapping is required.
+ */
+int sd_dif_prepare(struct request *rq, sector_t hw_sector, unsigned int sector_sz)
+{
+	const int tuple_sz = sizeof(struct sd_dif_tuple);
+	struct bio *bio;
+	struct scsi_disk *sdkp;
+	struct sd_dif_tuple *sdt;
+	unsigned int i, j;
+	u32 phys, virt;
+
+	/* Already remapped? */
+	if (rq->cmd_flags & REQ_INTEGRITY)
+		return 0;
+
+	sdkp = rq->bio->bi_bdev->bd_disk->private_data;
+
+	if (sdkp->protection_type == SD_DIF_TYPE3_PROTECTION)
+		return 0;
+
+	rq->cmd_flags |= REQ_INTEGRITY;
+	phys = hw_sector & 0xffffffff;
+
+	__rq_for_each_bio(bio, rq) {
+		struct bio_vec *iv;
+
+		virt = bio->bi_integrity->bip_sector & 0xffffffff;
+
+		bip_for_each_vec(iv, bio->bi_integrity, i) {
+			sdt = kmap_atomic(iv->bv_page, KM_USER0)
+				+ iv->bv_offset;
+
+			for (j = 0 ; j < iv->bv_len ; j += tuple_sz, sdt++) {
+
+				if (be32_to_cpu(sdt->ref_tag) != virt)
+					goto error;
+
+				sdt->ref_tag = cpu_to_be32(phys);
+				virt++;
+				phys++;
+			}
+
+			kunmap_atomic(sdt, KM_USER0);
+		}
+	}
+
+	return 0;
+
+error:
+	kunmap_atomic(sdt, KM_USER0);
+	sd_printk(KERN_ERR, sdkp, "%s: virt %u, phys %u, ref %u\n",
+		  __func__, virt, phys, be32_to_cpu(sdt->ref_tag));
+
+	return -EIO;
+}
+
+/*
+ * Remap physical sector values in the reference tag to the virtual
+ * values expected by the block layer.
+ */
+void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes)
+{
+	const int tuple_sz = sizeof(struct sd_dif_tuple);
+	struct scsi_disk *sdkp;
+	struct bio *bio;
+	struct sd_dif_tuple *sdt;
+	unsigned int i, j, sectors, sector_sz;
+	u32 phys, virt;
+
+	sdkp = scsi_disk(scmd->request->rq_disk);
+
+	if (sdkp->protection_type == SD_DIF_TYPE3_PROTECTION || good_bytes == 0)
+		return;
+
+	sector_sz = scmd->device->sector_size;
+	sectors = good_bytes / sector_sz;
+
+	phys = scmd->request->sector & 0xffffffff;
+	if (sector_sz == 4096)
+		phys >>= 3;
+
+	__rq_for_each_bio(bio, scmd->request) {
+		struct bio_vec *iv;
+
+		virt = bio->bi_integrity->bip_sector & 0xffffffff;
+
+		bip_for_each_vec(iv, bio->bi_integrity, i) {
+			sdt = kmap_atomic(iv->bv_page, KM_USER0)
+				+ iv->bv_offset;
+
+			for (j = 0 ; j < iv->bv_len ; j += tuple_sz, sdt++) {
+
+				if (sectors == 0) {
+					kunmap_atomic(sdt, KM_USER0);
+					return;
+				}
+
+				if (be32_to_cpu(sdt->ref_tag) != phys &&
+				    sdt->app_tag != 0xffff)
+					sdt->ref_tag = 0xffffffff; /* Bad ref */
+				else
+					sdt->ref_tag = cpu_to_be32(virt);
+
+				virt++;
+				phys++;
+				sectors--;
+			}
+
+			kunmap_atomic(sdt, KM_USER0);
+		}
+	}
+}
+
-- 
cgit v1.2.3


From 12265709ac6e197f4d40d9ec1fd3af97b4196a35 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Mon, 21 Jul 2008 10:25:52 -0400
Subject: [SCSI] scsi_eh_prep_cmnd should save scmd->underflow

This patch (as1116) fixes a bug in scsi_eh_prep_cmnd() and
scsi_eh_restore_cmnd().  These routines are supposed to save any
values they change and restore them later, but someone forgot to
save & restore scmd->underflow.

This fixes part of the problem reported in Bugzilla #9638.

[jejb: fix up rejections around DIF/DIX]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_error.c | 2 ++
 include/scsi/scsi_eh.h    | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index fc4b2d05f2e..171b82d748c 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -667,6 +667,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 	ses->sdb = scmd->sdb;
 	ses->next_rq = scmd->request->next_rq;
 	ses->result = scmd->result;
+	ses->underflow = scmd->underflow;
 	ses->prot_op = scmd->prot_op;
 
 	scmd->prot_op = SCSI_PROT_NORMAL;
@@ -727,6 +728,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 	scmd->sdb = ses->sdb;
 	scmd->request->next_rq = ses->next_rq;
 	scmd->result = ses->result;
+	scmd->underflow = ses->underflow;
 	scmd->prot_op = ses->prot_op;
 }
 EXPORT_SYMBOL(scsi_eh_restore_cmnd);
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index e5499ed0e37..06a8790893e 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -74,6 +74,7 @@ struct scsi_eh_save {
 	/* saved state */
 	int result;
 	enum dma_data_direction data_direction;
+	unsigned underflow;
 	unsigned char cmd_len;
 	unsigned char prot_op;
 	unsigned char *cmnd;
-- 
cgit v1.2.3


From 773e82f6cdb026282ff7d26aaac291a5fa84ee3a Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 21 Jul 2008 09:58:30 +0200
Subject: [SCSI] scsi_scan.c: Release mutex in error handling code

The mutex is released on a successful return, so it would seem that it
should be released on an error return as well.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression l;
@@

mutex_lock(l);
... when != mutex_unlock(l)
    when any
    when strict
(
if (...) { ... when != mutex_unlock(l)
+   mutex_unlock(l);
    return ...;
}
|
mutex_unlock(l);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_scan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 196fe3af0d5..b7b74489fce 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1760,6 +1760,7 @@ static void scsi_finish_async_scan(struct async_scan_data *data)
 		printk("%s called twice for host %d", __FUNCTION__,
 				shost->host_no);
 		dump_stack();
+		mutex_unlock(&shost->scan_mutex);
 		return;
 	}
 
-- 
cgit v1.2.3


From e41443ec3bb3dc4b12c861e91a5d36feb45f8a46 Mon Sep 17 00:00:00 2001
From: Mike Anderson <andmike@linux.vnet.ibm.com>
Date: Mon, 21 Jul 2008 15:58:32 -0700
Subject: [SCSI] sym53c8xx: free luntbl in sym_hcb_free

This patch frees the luntbl dma area in sym_hcb_free if allocated.
Since the luntbl is part of a larger dma coherent area not freeing the
luntbl kept a 64k dma coherent area previous allocated through
dma_alloc_coherent allocated. This prevented a DLPAR remove IO
operation from completing successfully.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/sym53c8xx_2/sym_hipd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 22a6aae7869..98df1651404 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -5741,6 +5741,8 @@ void sym_hcb_free(struct sym_hcb *np)
 
 	for (target = 0; target < SYM_CONF_MAX_TARGET ; target++) {
 		tp = &np->target[target];
+		if (tp->luntbl)
+			sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
 #if SYM_CONF_MAX_LUN > 1
 		kfree(tp->lunmp);
 #endif 
-- 
cgit v1.2.3


From 0ae808e02e000058cf65a47662c187dc061bcfd3 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Tue, 22 Jul 2008 08:31:39 -0500
Subject: [SCSI] ibmvfc: Reduce unnecessary log noise

Reduces some unnecessary log noise by removing a printk during
host port state query and increasing the log level required to
log received async events.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index c4a7c06793c..8d393800f47 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -963,6 +963,9 @@ static void ibmvfc_get_host_port_state(struct Scsi_Host *shost)
 	case IBMVFC_HALTED:
 		fc_host_port_state(shost) = FC_PORTSTATE_BLOCKED;
 		break;
+	case IBMVFC_NO_CRQ:
+		fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
+		break;
 	default:
 		ibmvfc_log(vhost, 3, "Unknown port state: %d\n", vhost->state);
 		fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
@@ -1404,7 +1407,7 @@ static void ibmvfc_log_error(struct ibmvfc_event *evt)
 		err = cmd_status[index].name;
 	}
 
-	if (!logerr && (vhost->log_level <= IBMVFC_DEFAULT_LOG_LEVEL))
+	if (!logerr && (vhost->log_level <= (IBMVFC_DEFAULT_LOG_LEVEL + 1)))
 		return;
 
 	if (rsp->flags & FCP_RSP_LEN_VALID)
@@ -2054,7 +2057,7 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 {
 	const char *desc = ibmvfc_get_ae_desc(crq->event);
 
-	ibmvfc_log(vhost, 2, "%s event received\n", desc);
+	ibmvfc_log(vhost, 3, "%s event received\n", desc);
 
 	switch (crq->event) {
 	case IBMVFC_AE_LINK_UP:
-- 
cgit v1.2.3


From b3c10489cb464b12a74dda65f826433f71f2c2e2 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Tue, 22 Jul 2008 08:31:41 -0500
Subject: [SCSI] ibmvfc: Target refcounting fixes

Fix up some refcounting on the ibmvfc drivers internal target struct
when accessed through some sysfs attributes.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 48 ++++++++++++++++++++++++------------------
 1 file changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 8d393800f47..1781cec97fb 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -854,39 +854,41 @@ static void ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
 }
 
 /**
- * __ibmvfc_find_target - Find the specified scsi_target (no locking)
+ * __ibmvfc_get_target - Find the specified scsi_target (no locking)
  * @starget:	scsi target struct
  *
  * Return value:
  *	ibmvfc_target struct / NULL if not found
  **/
-static struct ibmvfc_target *__ibmvfc_find_target(struct scsi_target *starget)
+static struct ibmvfc_target *__ibmvfc_get_target(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 	struct ibmvfc_host *vhost = shost_priv(shost);
 	struct ibmvfc_target *tgt;
 
 	list_for_each_entry(tgt, &vhost->targets, queue)
-		if (tgt->target_id == starget->id)
+		if (tgt->target_id == starget->id) {
+			kref_get(&tgt->kref);
 			return tgt;
+		}
 	return NULL;
 }
 
 /**
- * ibmvfc_find_target - Find the specified scsi_target
+ * ibmvfc_get_target - Find the specified scsi_target
  * @starget:	scsi target struct
  *
  * Return value:
  *	ibmvfc_target struct / NULL if not found
  **/
-static struct ibmvfc_target *ibmvfc_find_target(struct scsi_target *starget)
+static struct ibmvfc_target *ibmvfc_get_target(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 	struct ibmvfc_target *tgt;
 	unsigned long flags;
 
 	spin_lock_irqsave(shost->host_lock, flags);
-	tgt = __ibmvfc_find_target(starget);
+	tgt = __ibmvfc_get_target(starget);
 	spin_unlock_irqrestore(shost->host_lock, flags);
 	return tgt;
 }
@@ -990,6 +992,17 @@ static void ibmvfc_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout)
 		rport->dev_loss_tmo = 1;
 }
 
+/**
+ * ibmvfc_release_tgt - Free memory allocated for a target
+ * @kref:		kref struct
+ *
+ **/
+static void ibmvfc_release_tgt(struct kref *kref)
+{
+	struct ibmvfc_target *tgt = container_of(kref, struct ibmvfc_target, kref);
+	kfree(tgt);
+}
+
 /**
  * ibmvfc_get_starget_node_name - Get SCSI target's node name
  * @starget:	scsi target struct
@@ -999,8 +1012,10 @@ static void ibmvfc_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout)
  **/
 static void ibmvfc_get_starget_node_name(struct scsi_target *starget)
 {
-	struct ibmvfc_target *tgt = ibmvfc_find_target(starget);
+	struct ibmvfc_target *tgt = ibmvfc_get_target(starget);
 	fc_starget_port_name(starget) = tgt ? tgt->ids.node_name : 0;
+	if (tgt)
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
 }
 
 /**
@@ -1012,8 +1027,10 @@ static void ibmvfc_get_starget_node_name(struct scsi_target *starget)
  **/
 static void ibmvfc_get_starget_port_name(struct scsi_target *starget)
 {
-	struct ibmvfc_target *tgt = ibmvfc_find_target(starget);
+	struct ibmvfc_target *tgt = ibmvfc_get_target(starget);
 	fc_starget_port_name(starget) = tgt ? tgt->ids.port_name : 0;
+	if (tgt)
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
 }
 
 /**
@@ -1025,8 +1042,10 @@ static void ibmvfc_get_starget_port_name(struct scsi_target *starget)
  **/
 static void ibmvfc_get_starget_port_id(struct scsi_target *starget)
 {
-	struct ibmvfc_target *tgt = ibmvfc_find_target(starget);
+	struct ibmvfc_target *tgt = ibmvfc_get_target(starget);
 	fc_starget_port_id(starget) = tgt ? tgt->scsi_id : -1;
+	if (tgt)
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
 }
 
 /**
@@ -2650,17 +2669,6 @@ static void ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
 		ibmvfc_init_tgt(tgt, job_step);
 }
 
-/**
- * ibmvfc_release_tgt - Free memory allocated for a target
- * @kref:		kref struct
- *
- **/
-static void ibmvfc_release_tgt(struct kref *kref)
-{
-	struct ibmvfc_target *tgt = container_of(kref, struct ibmvfc_target, kref);
-	kfree(tgt);
-}
-
 /**
  * ibmvfc_tgt_prli_done - Completion handler for Process Login
  * @evt:	ibmvfc event struct
-- 
cgit v1.2.3


From 2d0da2a44e065a5bdd90bed2ebe0b9216c27f682 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Tue, 22 Jul 2008 08:31:42 -0500
Subject: [SCSI] ibmvfc: Fix hang on module removal

If certain ELS events are received during module removal, after the kthread
is stopped, the rmmod can hang. This fixes the ibmvfc driver so that ELS
events during rmmod are ignored by stopping all device activity prior to
killing the kthread and also changes reinitialization to not attempt a reinit
if the adapter has been taken offline.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 1781cec97fb..f1e5fac1c1d 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -521,9 +521,10 @@ static void ibmvfc_set_host_action(struct ibmvfc_host *vhost,
 static void ibmvfc_reinit_host(struct ibmvfc_host *vhost)
 {
 	if (vhost->action == IBMVFC_HOST_ACTION_NONE) {
-		scsi_block_requests(vhost->host);
-		ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING);
-		ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+		if (!ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+			scsi_block_requests(vhost->host);
+			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+		}
 	} else
 		vhost->reinit = 1;
 
@@ -3811,10 +3812,12 @@ static int ibmvfc_remove(struct vio_dev *vdev)
 
 	ENTER;
 	ibmvfc_remove_trace_file(&vhost->host->shost_dev.kobj, &ibmvfc_trace_attr);
+	ibmvfc_link_down(vhost, IBMVFC_HOST_OFFLINE);
+	ibmvfc_wait_while_resetting(vhost);
+	ibmvfc_release_crq_queue(vhost);
 	kthread_stop(vhost->work_thread);
 	fc_remove_host(vhost->host);
 	scsi_remove_host(vhost->host);
-	ibmvfc_release_crq_queue(vhost);
 
 	spin_lock_irqsave(vhost->host->host_lock, flags);
 	ibmvfc_purge_requests(vhost, DID_ERROR);
-- 
cgit v1.2.3


From 52d7e861cc071688f5fa3ee1b6e94785adeff8db Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Tue, 22 Jul 2008 08:31:46 -0500
Subject: [SCSI] ibmvfc: Miscellaneous fixes

Properly setup the size of the async event queue. This fixes a bug where async events
were not getting processed by the driver.

Setup target_id field in the driver's target struct so that target sysfs attributes
work for multiple targets.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index f1e5fac1c1d..1917acb9102 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1136,7 +1136,7 @@ static void ibmvfc_set_login_info(struct ibmvfc_host *vhost)
 	login_info->max_cmds = max_requests + IBMVFC_NUM_INTERNAL_REQ;
 	login_info->capabilities = IBMVFC_CAN_MIGRATE;
 	login_info->async.va = vhost->async_crq.msg_token;
-	login_info->async.len = vhost->async_crq.size;
+	login_info->async.len = vhost->async_crq.size * sizeof(*vhost->async_crq.msgs);
 	strncpy(login_info->partition_name, vhost->partition_name, IBMVFC_MAX_NAME);
 	strncpy(login_info->device_name,
 		vhost->host->shost_gendev.bus_id, IBMVFC_MAX_NAME);
@@ -3348,6 +3348,7 @@ static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
 		tgt_dbg(tgt, "rport add succeeded\n");
 		rport->maxframe_size = tgt->service_parms.common.bb_rcv_sz & 0x0fff;
 		rport->supported_classes = 0;
+		tgt->target_id = rport->scsi_target_id;
 		if (tgt->service_parms.class1_parms[0] & 0x80000000)
 			rport->supported_classes |= FC_COS_CLASS1;
 		if (tgt->service_parms.class2_parms[0] & 0x80000000)
-- 
cgit v1.2.3


From 989b854579875b38d45fffa7f8c89177f7698cd3 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Tue, 22 Jul 2008 08:31:47 -0500
Subject: [SCSI] ibmvfc: Add ADISC support

Add an ADISC to the target discovery job in order to sanity check whether or
not we need to re-login to the target.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 135 +++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ibmvscsi/ibmvfc.h |  36 +++++++++++
 2 files changed, 171 insertions(+)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 1917acb9102..a33fa133f75 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2913,6 +2913,139 @@ static void ibmvfc_tgt_implicit_logout(struct ibmvfc_target *tgt)
 		tgt_dbg(tgt, "Sent Implicit Logout\n");
 }
 
+/**
+ * ibmvfc_adisc_needs_plogi - Does device need PLOGI?
+ * @mad:	ibmvfc passthru mad struct
+ * @tgt:	ibmvfc target struct
+ *
+ * Returns:
+ *	1 if PLOGI needed / 0 if PLOGI not needed
+ **/
+static int ibmvfc_adisc_needs_plogi(struct ibmvfc_passthru_mad *mad,
+				    struct ibmvfc_target *tgt)
+{
+	if (memcmp(&mad->fc_iu.response[2], &tgt->ids.port_name,
+		   sizeof(tgt->ids.port_name)))
+		return 1;
+	if (memcmp(&mad->fc_iu.response[4], &tgt->ids.node_name,
+		   sizeof(tgt->ids.node_name)))
+		return 1;
+	if (mad->fc_iu.response[6] != tgt->scsi_id)
+		return 1;
+	return 0;
+}
+
+/**
+ * ibmvfc_tgt_adisc_done - Completion handler for ADISC
+ * @evt:	ibmvfc event struct
+ *
+ **/
+static void ibmvfc_tgt_adisc_done(struct ibmvfc_event *evt)
+{
+	struct ibmvfc_target *tgt = evt->tgt;
+	struct ibmvfc_host *vhost = evt->vhost;
+	struct ibmvfc_passthru_mad *mad = &evt->xfer_iu->passthru;
+	u32 status = mad->common.status;
+	u8 fc_reason, fc_explain;
+
+	vhost->discovery_threads--;
+	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+
+	switch (status) {
+	case IBMVFC_MAD_SUCCESS:
+		tgt_dbg(tgt, "ADISC succeeded\n");
+		if (ibmvfc_adisc_needs_plogi(mad, tgt))
+			tgt->need_login = 1;
+		break;
+	case IBMVFC_MAD_DRIVER_FAILED:
+		break;
+	case IBMVFC_MAD_FAILED:
+	default:
+		tgt->need_login = 1;
+		fc_reason = (mad->fc_iu.response[1] & 0x00ff0000) >> 16;
+		fc_explain = (mad->fc_iu.response[1] & 0x0000ff00) >> 8;
+		tgt_info(tgt, "ADISC failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+			 ibmvfc_get_cmd_error(mad->iu.status, mad->iu.error),
+			 mad->iu.status, mad->iu.error,
+			 ibmvfc_get_fc_type(fc_reason), fc_reason,
+			 ibmvfc_get_ls_explain(fc_explain), fc_explain, status);
+		break;
+	};
+
+	kref_put(&tgt->kref, ibmvfc_release_tgt);
+	ibmvfc_free_event(evt);
+	wake_up(&vhost->work_wait_q);
+}
+
+/**
+ * ibmvfc_init_passthru - Initialize an event struct for FC passthru
+ * @evt:		ibmvfc event struct
+ *
+ **/
+static void ibmvfc_init_passthru(struct ibmvfc_event *evt)
+{
+	struct ibmvfc_passthru_mad *mad = &evt->iu.passthru;
+
+	memset(mad, 0, sizeof(*mad));
+	mad->common.version = 1;
+	mad->common.opcode = IBMVFC_PASSTHRU;
+	mad->common.length = sizeof(*mad) - sizeof(mad->fc_iu) - sizeof(mad->iu);
+	mad->cmd_ioba.va = (u64)evt->crq.ioba +
+		offsetof(struct ibmvfc_passthru_mad, iu);
+	mad->cmd_ioba.len = sizeof(mad->iu);
+	mad->iu.cmd_len = sizeof(mad->fc_iu.payload);
+	mad->iu.rsp_len = sizeof(mad->fc_iu.response);
+	mad->iu.cmd.va = (u64)evt->crq.ioba +
+		offsetof(struct ibmvfc_passthru_mad, fc_iu) +
+		offsetof(struct ibmvfc_passthru_fc_iu, payload);
+	mad->iu.cmd.len = sizeof(mad->fc_iu.payload);
+	mad->iu.rsp.va = (u64)evt->crq.ioba +
+		offsetof(struct ibmvfc_passthru_mad, fc_iu) +
+		offsetof(struct ibmvfc_passthru_fc_iu, response);
+	mad->iu.rsp.len = sizeof(mad->fc_iu.response);
+}
+
+/**
+ * ibmvfc_tgt_adisc - Initiate an ADISC for specified target
+ * @tgt:		ibmvfc target struct
+ *
+ **/
+static void ibmvfc_tgt_adisc(struct ibmvfc_target *tgt)
+{
+	struct ibmvfc_passthru_mad *mad;
+	struct ibmvfc_host *vhost = tgt->vhost;
+	struct ibmvfc_event *evt;
+
+	if (vhost->discovery_threads >= disc_threads)
+		return;
+
+	kref_get(&tgt->kref);
+	evt = ibmvfc_get_event(vhost);
+	vhost->discovery_threads++;
+	ibmvfc_init_event(evt, ibmvfc_tgt_adisc_done, IBMVFC_MAD_FORMAT);
+	evt->tgt = tgt;
+
+	ibmvfc_init_passthru(evt);
+	mad = &evt->iu.passthru;
+	mad->iu.flags = IBMVFC_FC_ELS;
+	mad->iu.scsi_id = tgt->scsi_id;
+
+	mad->fc_iu.payload[0] = IBMVFC_ADISC;
+	memcpy(&mad->fc_iu.payload[2], &vhost->login_buf->resp.port_name,
+	       sizeof(vhost->login_buf->resp.port_name));
+	memcpy(&mad->fc_iu.payload[4], &vhost->login_buf->resp.node_name,
+	       sizeof(vhost->login_buf->resp.node_name));
+	mad->fc_iu.payload[6] = vhost->login_buf->resp.scsi_id & 0x00ffffff;
+
+	ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT_WAIT);
+	if (ibmvfc_send_event(evt, vhost, default_timeout)) {
+		vhost->discovery_threads--;
+		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+		kref_put(&tgt->kref, ibmvfc_release_tgt);
+	} else
+		tgt_dbg(tgt, "Sent ADISC\n");
+}
+
 /**
  * ibmvfc_tgt_query_target_done - Completion handler for Query Target MAD
  * @evt:	ibmvfc event struct
@@ -2933,6 +3066,8 @@ static void ibmvfc_tgt_query_target_done(struct ibmvfc_event *evt)
 		tgt->new_scsi_id = rsp->scsi_id;
 		if (rsp->scsi_id != tgt->scsi_id)
 			ibmvfc_init_tgt(tgt, ibmvfc_tgt_implicit_logout);
+		else
+			ibmvfc_init_tgt(tgt, ibmvfc_tgt_adisc);
 		break;
 	case IBMVFC_MAD_DRIVER_FAILED:
 		break;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 057f3c01ed6..6a48e5bb94e 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -119,6 +119,7 @@ enum ibmvfc_mad_types {
 	IBMVFC_PROCESS_LOGIN	= 0x0008,
 	IBMVFC_QUERY_TARGET	= 0x0010,
 	IBMVFC_IMPLICIT_LOGOUT	= 0x0040,
+	IBMVFC_PASSTHRU		= 0x0200,
 	IBMVFC_TMF_MAD		= 0x0100,
 };
 
@@ -439,6 +440,37 @@ struct ibmvfc_cmd {
 	struct ibmvfc_fcp_rsp rsp;
 }__attribute__((packed, aligned (8)));
 
+struct ibmvfc_passthru_fc_iu {
+	u32 payload[7];
+#define IBMVFC_ADISC	0x52000000
+	u32 response[7];
+};
+
+struct ibmvfc_passthru_iu {
+	u64 task_tag;
+	u32 cmd_len;
+	u32 rsp_len;
+	u16 status;
+	u16 error;
+	u32 flags;
+#define IBMVFC_FC_ELS		0x01
+	u32 cancel_key;
+	u32 reserved;
+	struct srp_direct_buf cmd;
+	struct srp_direct_buf rsp;
+	u64 correlation;
+	u64 scsi_id;
+	u64 tag;
+	u64 reserved2[2];
+}__attribute__((packed, aligned (8)));
+
+struct ibmvfc_passthru_mad {
+	struct ibmvfc_mad_common common;
+	struct srp_direct_buf cmd_ioba;
+	struct ibmvfc_passthru_iu iu;
+	struct ibmvfc_passthru_fc_iu fc_iu;
+}__attribute__((packed, aligned (8)));
+
 struct ibmvfc_trace_start_entry {
 	u32 xfer_len;
 }__attribute__((packed));
@@ -531,6 +563,7 @@ union ibmvfc_iu {
 	struct ibmvfc_implicit_logout implicit_logout;
 	struct ibmvfc_tmf tmf;
 	struct ibmvfc_cmd cmd;
+	struct ibmvfc_passthru_mad passthru;
 }__attribute__((packed, aligned (8)));
 
 enum ibmvfc_target_action {
@@ -656,6 +689,9 @@ struct ibmvfc_host {
 #define tgt_dbg(t, fmt, ...)			\
 	DBG_CMD(dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__))
 
+#define tgt_info(t, fmt, ...)		\
+	dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
+
 #define tgt_err(t, fmt, ...)		\
 	dev_err((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
 
-- 
cgit v1.2.3


From b7b1a35ea563a8f1219dc3fdf12f37937cb83245 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Tue, 22 Jul 2008 08:31:48 -0500
Subject: [SCSI] ibmvfc: Update driver version to 1.0.1

Update driver version to 1.0.1.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 6a48e5bb94e..de2c34abddf 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
 #include "viosrp.h"
 
 #define IBMVFC_NAME	"ibmvfc"
-#define IBMVFC_DRIVER_VERSION		"1.0.0"
-#define IBMVFC_DRIVER_DATE		"(July 1, 2008)"
+#define IBMVFC_DRIVER_VERSION		"1.0.1"
+#define IBMVFC_DRIVER_DATE		"(July 11, 2008)"
 
 #define IBMVFC_DEFAULT_TIMEOUT	15
 #define IBMVFC_INIT_TIMEOUT		30
-- 
cgit v1.2.3


From 6bd522f6a226f435508433d24e0de4619e016a9d Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Tue, 22 Jul 2008 15:34:38 -0500
Subject: [SCSI] scsi_lib: use blk_rq_tagged in scsi_request_fn

I goofed and did not see the macro for checking if a request is tagged.
This patch has us use blk_rq_tagged instead of digging into the req->tag.

Patch was made over scsi-misc.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/scsi_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index a20730c4802..6d62be664d5 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1533,7 +1533,7 @@ static void scsi_request_fn(struct request_queue *q)
 		 * we add the dev to the starved list so it eventually gets
 		 * a run when a tag is freed.
 		 */
-		if (blk_queue_tagged(q) && (req->tag == -1)) {
+		if (blk_queue_tagged(q) && !blk_rq_tagged(req)) {
 			if (list_empty(&sdev->starved_entry))
 				list_add_tail(&sdev->starved_entry,
 					      &shost->starved_list);
-- 
cgit v1.2.3


From 3dabec7175bc6d49e88748cf03951357e74496ca Mon Sep 17 00:00:00 2001
From: adam radford <aradford@gmail.com>
Date: Tue, 22 Jul 2008 16:47:40 -0700
Subject: [SCSI] 3w-9xxx: add MSI support and misc fixes

This patch for the 3w-9xxx scsi driver applies on top of the
BKL-pushdown changes in -git9.

This patch does the following:

- Increase max AENs drained to 256.
- Add MSI support and "use_msi" module parameter.
- Fix bug in twa_get_param() on 4GB+.
- Use pci_resource_len() for ioremap().

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/3w-9xxx.c | 40 ++++++++++++++++++++++++++++++----------
 drivers/scsi/3w-9xxx.h |  9 +++++----
 2 files changed, 35 insertions(+), 14 deletions(-)

diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 7045511f9ad..b92c19bb687 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -4,7 +4,7 @@
    Written By: Adam Radford <linuxraid@amcc.com>
    Modifications By: Tom Couch <linuxraid@amcc.com>
 
-   Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
+   Copyright (C) 2004-2008 Applied Micro Circuits Corporation.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -71,6 +71,10 @@
                  Add support for 9650SE controllers.
    2.26.02.009 - Fix dma mask setting to fallback to 32-bit if 64-bit fails.
    2.26.02.010 - Add support for 9690SA controllers.
+   2.26.02.011 - Increase max AENs drained to 256.
+                 Add MSI support and "use_msi" module parameter.
+                 Fix bug in twa_get_param() on 4GB+.
+                 Use pci_resource_len() for ioremap().
 */
 
 #include <linux/module.h>
@@ -95,7 +99,7 @@
 #include "3w-9xxx.h"
 
 /* Globals */
-#define TW_DRIVER_VERSION "2.26.02.010"
+#define TW_DRIVER_VERSION "2.26.02.011"
 static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
 static unsigned int twa_device_extension_count;
 static int twa_major = -1;
@@ -107,6 +111,10 @@ MODULE_DESCRIPTION ("3ware 9000 Storage Controller Linux Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(TW_DRIVER_VERSION);
 
+static int use_msi = 0;
+module_param(use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts.  Default: 0");
+
 /* Function prototypes */
 static void twa_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header);
 static int twa_aen_read_queue(TW_Device_Extension *tw_dev, int request_id);
@@ -1038,7 +1046,6 @@ static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int tabl
 	TW_Command_Full *full_command_packet;
 	TW_Command *command_packet;
 	TW_Param_Apache *param;
-	unsigned long param_value;
 	void *retval = NULL;
 
 	/* Setup the command packet */
@@ -1057,9 +1064,8 @@ static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int tabl
 	param->table_id = cpu_to_le16(table_id | 0x8000);
 	param->parameter_id = cpu_to_le16(parameter_id);
 	param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes);
-	param_value = tw_dev->generic_buffer_phys[request_id];
 
-	command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(param_value);
+	command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
 	command_packet->byte8_offset.param.sgl[0].length = cpu_to_le32(TW_SECTOR_SIZE);
 
 	/* Post the command packet to the board */
@@ -2000,7 +2006,7 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 {
 	struct Scsi_Host *host = NULL;
 	TW_Device_Extension *tw_dev;
-	u32 mem_addr;
+	unsigned long mem_addr, mem_len;
 	int retval = -ENODEV;
 
 	retval = pci_enable_device(pdev);
@@ -2045,13 +2051,16 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 		goto out_free_device_extension;
 	}
 
-	if (pdev->device == PCI_DEVICE_ID_3WARE_9000)
+	if (pdev->device == PCI_DEVICE_ID_3WARE_9000) {
 		mem_addr = pci_resource_start(pdev, 1);
-	else
+		mem_len = pci_resource_len(pdev, 1);
+	} else {
 		mem_addr = pci_resource_start(pdev, 2);
+		mem_len = pci_resource_len(pdev, 2);
+	}
 
 	/* Save base address */
-	tw_dev->base_addr = ioremap(mem_addr, PAGE_SIZE);
+	tw_dev->base_addr = ioremap(mem_addr, mem_len);
 	if (!tw_dev->base_addr) {
 		TW_PRINTK(tw_dev->host, TW_DRIVER, 0x35, "Failed to ioremap");
 		goto out_release_mem_region;
@@ -2086,7 +2095,7 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 
 	pci_set_drvdata(pdev, host);
 
-	printk(KERN_WARNING "3w-9xxx: scsi%d: Found a 3ware 9000 Storage Controller at 0x%x, IRQ: %d.\n",
+	printk(KERN_WARNING "3w-9xxx: scsi%d: Found a 3ware 9000 Storage Controller at 0x%lx, IRQ: %d.\n",
 	       host->host_no, mem_addr, pdev->irq);
 	printk(KERN_WARNING "3w-9xxx: scsi%d: Firmware %s, BIOS %s, Ports: %d.\n",
 	       host->host_no,
@@ -2097,6 +2106,11 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 	       le32_to_cpu(*(int *)twa_get_param(tw_dev, 2, TW_INFORMATION_TABLE,
 				     TW_PARAM_PORTCOUNT, TW_PARAM_PORTCOUNT_LENGTH)));
 
+	/* Try to enable MSI */
+	if (use_msi && (pdev->device != PCI_DEVICE_ID_3WARE_9000) &&
+	    !pci_enable_msi(pdev))
+		set_bit(TW_USING_MSI, &tw_dev->flags);
+
 	/* Now setup the interrupt handler */
 	retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev);
 	if (retval) {
@@ -2120,6 +2134,8 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 	return 0;
 
 out_remove_host:
+	if (test_bit(TW_USING_MSI, &tw_dev->flags))
+		pci_disable_msi(pdev);
 	scsi_remove_host(host);
 out_iounmap:
 	iounmap(tw_dev->base_addr);
@@ -2151,6 +2167,10 @@ static void twa_remove(struct pci_dev *pdev)
 	/* Shutdown the card */
 	__twa_shutdown(tw_dev);
 
+	/* Disable MSI if enabled */
+	if (test_bit(TW_USING_MSI, &tw_dev->flags))
+		pci_disable_msi(pdev);
+
 	/* Free IO remapping */
 	iounmap(tw_dev->base_addr);
 
diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h
index d14a9479e38..1729a8785fe 100644
--- a/drivers/scsi/3w-9xxx.h
+++ b/drivers/scsi/3w-9xxx.h
@@ -4,7 +4,7 @@
    Written By: Adam Radford <linuxraid@amcc.com>
    Modifications By: Tom Couch <linuxraid@amcc.com>
 
-   Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
+   Copyright (C) 2004-2008 Applied Micro Circuits Corporation.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -319,8 +319,8 @@ static twa_message_type twa_error_table[] = {
 
 /* Compatibility defines */
 #define TW_9000_ARCH_ID 0x5
-#define TW_CURRENT_DRIVER_SRL 30
-#define TW_CURRENT_DRIVER_BUILD 80
+#define TW_CURRENT_DRIVER_SRL 35
+#define TW_CURRENT_DRIVER_BUILD 0
 #define TW_CURRENT_DRIVER_BRANCH 0
 
 /* Phase defines */
@@ -352,8 +352,9 @@ static twa_message_type twa_error_table[] = {
 #define TW_MAX_RESET_TRIES		      2
 #define TW_MAX_CMDS_PER_LUN		      254
 #define TW_MAX_RESPONSE_DRAIN		      256
-#define TW_MAX_AEN_DRAIN		      40
+#define TW_MAX_AEN_DRAIN		      255
 #define TW_IN_RESET                           2
+#define TW_USING_MSI			      3
 #define TW_IN_ATTENTION_LOOP		      4
 #define TW_MAX_SECTORS                        256
 #define TW_AEN_WAIT_TIME                      1000
-- 
cgit v1.2.3


From 3d164fb09bb5cb8a223eddf634fc0d355714fcfe Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 26 Jul 2008 23:25:43 +0900
Subject: [SCSI] ch: fix ch_remove oops

The following commit causes ch_remove oops:

commit 24b42566c3fcbb5a9011d1446783d0f5844ccd45
Author: Greg Kroah-Hartman <gregkh@suse.de>
Date:   Fri May 16 17:55:12 2008 -0700

    SCSI: fix race in device_create

    There is a race from when a device is created with device_create() and
    then the drvdata is set with a call to dev_set_drvdata() in which a
    sysfs file could be open, yet the drvdata will be NULL, causing all
    sorts of bad things to happen.

    This patch fixes the problem by using the new function,
    device_create_drvdata().  It fixes the problem in all of the scsi
    drivers that need it.

    Cc: Kay Sievers <kay.sievers@vrfy.org>
    Cc: Doug Gilbert <dgilbert@interlog.com>
    Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The problem is ch_probe stores ch's private data at a wrong place.

We need to store it at scsi_device->sdev_gendev but the above patch
stores it at device struct that device_create_drvdata returns. So we
hit an oops when ch_remove accesses
scsi_device->sdev_gendev->driver_data, which is NULL.

Actually, there wasn't a race because ch doesn't create sysfs files
with device struct that device_create returns. This patch puts back
dev_set_drvdata() to set ch's private data properly.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ch.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index aa2011b6468..3c257fe0893 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -930,6 +930,7 @@ static int ch_probe(struct device *dev)
 	if (init)
 		ch_init_elem(ch);
 
+	dev_set_drvdata(dev, ch);
 	sdev_printk(KERN_INFO, sd, "Attached scsi changer %s\n", ch->name);
 
 	return 0;
-- 
cgit v1.2.3


From 8201e207997b4665a5fcb375bab293fddb2e6adb Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 24 Jul 2008 08:31:46 -0700
Subject: [SCSI] qla2xxx: Issue proper ISP callbacks during stop-firmware.

As the original code would incorrectly call the non-ISP24xx/25xx
callbacks during recovery, a stop-firmware failure could result
in improper bit-banging of the RISC and in some cases manifest in
a NMI-watchdog trigger due to the RISC not coming out of its
reset state.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 44c0117c5d2..597ac201969 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4038,8 +4038,8 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *ha)
 	ret = qla2x00_stop_firmware(ha);
 	for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
 	    retries ; retries--) {
-		qla2x00_reset_chip(ha);
-		if (qla2x00_chip_diag(ha) != QLA_SUCCESS)
+		ha->isp_ops->reset_chip(ha);
+		if (ha->isp_ops->chip_diag(ha) != QLA_SUCCESS)
 			continue;
 		if (qla2x00_setup_chip(ha) != QLA_SUCCESS)
 			continue;
-- 
cgit v1.2.3


From b3dc9088f3714642284245a6c580305a1415e0e3 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Thu, 24 Jul 2008 08:31:47 -0700
Subject: [SCSI] qla2xxx: use memory_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_attr.c | 44 +++++++++--------------------------------
 1 file changed, 9 insertions(+), 35 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 612e3d0c7bd..fcec43a32be 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -20,18 +20,12 @@ qla2x00_sysfs_read_fw_dump(struct kobject *kobj,
 {
 	struct scsi_qla_host *ha = shost_priv(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
-	char *rbuf = (char *)ha->fw_dump;
 
 	if (ha->fw_dump_reading == 0)
 		return 0;
-	if (off > ha->fw_dump_len)
-                return 0;
-	if (off + count > ha->fw_dump_len)
-		count = ha->fw_dump_len - off;
 
-	memcpy(buf, &rbuf[off], count);
-
-	return (count);
+	return memory_read_from_buffer(buf, count, &off, ha->fw_dump,
+					ha->fw_dump_len);
 }
 
 static ssize_t
@@ -94,20 +88,13 @@ qla2x00_sysfs_read_nvram(struct kobject *kobj,
 {
 	struct scsi_qla_host *ha = shost_priv(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
-	int		size = ha->nvram_size;
-	char		*nvram_cache = ha->nvram;
 
-	if (!capable(CAP_SYS_ADMIN) || off > size || count == 0)
+	if (!capable(CAP_SYS_ADMIN))
 		return 0;
-	if (off + count > size) {
-		size -= off;
-		count = size;
-	}
 
 	/* Read NVRAM data from cache. */
-	memcpy(buf, &nvram_cache[off], count);
-
-	return count;
+	return memory_read_from_buffer(buf, count, &off, ha->nvram,
+					ha->nvram_size);
 }
 
 static ssize_t
@@ -175,14 +162,9 @@ qla2x00_sysfs_read_optrom(struct kobject *kobj,
 
 	if (ha->optrom_state != QLA_SREADING)
 		return 0;
-	if (off > ha->optrom_region_size)
-		return 0;
-	if (off + count > ha->optrom_region_size)
-		count = ha->optrom_region_size - off;
 
-	memcpy(buf, &ha->optrom_buffer[off], count);
-
-	return count;
+	return memory_read_from_buffer(buf, count, &off, ha->optrom_buffer,
+					ha->optrom_region_size);
 }
 
 static ssize_t
@@ -374,20 +356,12 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj,
 {
 	struct scsi_qla_host *ha = shost_priv(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
-	int           size = ha->vpd_size;
-	char          *vpd_cache = ha->vpd;
 
-	if (!capable(CAP_SYS_ADMIN) || off > size || count == 0)
+	if (!capable(CAP_SYS_ADMIN))
 		return 0;
-	if (off + count > size) {
-		size -= off;
-		count = size;
-	}
 
 	/* Read NVRAM data from cache. */
-	memcpy(buf, &vpd_cache[off], count);
-
-	return count;
+	return memory_read_from_buffer(buf, count, &off, ha->vpd, ha->vpd_size);
 }
 
 static ssize_t
-- 
cgit v1.2.3


From bf6583b5831d3195c45f98ec3016499389cbe18f Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 24 Jul 2008 08:31:48 -0700
Subject: [SCSI] qla2xxx: suppress uninitialized-var warning

drivers/scsi/qla2xxx/qla_os.c: In function 'qla2x00_post_work':
drivers/scsi/qla2xxx/qla_os.c:2158: warning: 'flags' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 0f44914b41d..8fc712bbf34 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2178,7 +2178,7 @@ qla2x00_alloc_work(struct scsi_qla_host *ha, enum qla_work_type type,
 static int
 qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
 {
-	unsigned long flags;
+	unsigned long uninitialized_var(flags);
 	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	if (!locked)
-- 
cgit v1.2.3


From c9c5ced90abc22a94c96fa7db0e29c13483a6db0 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 24 Jul 2008 08:31:49 -0700
Subject: [SCSI] qla2xxx: Additional NPIV corrections.

Minor fixes addressing:
- rport managements during vport deletion.
- acquire proper physical-ha during qla24xx_abort_command() and
  qla24xx_queuecommand()
- do not needlessly acquire the pha for non-NPIV capable ISPs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_attr.c | 5 +++++
 drivers/scsi/qla2xxx/qla_init.c | 3 ++-
 drivers/scsi/qla2xxx/qla_iocb.c | 9 ++++-----
 drivers/scsi/qla2xxx/qla_mbx.c  | 7 +++----
 drivers/scsi/qla2xxx/qla_mid.c  | 1 +
 drivers/scsi/qla2xxx/qla_os.c   | 6 ++++--
 6 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index fcec43a32be..7a4409ab30e 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1177,6 +1177,11 @@ static int
 qla24xx_vport_delete(struct fc_vport *fc_vport)
 {
 	scsi_qla_host_t *vha = fc_vport->dd_data;
+	scsi_qla_host_t *pha = to_qla_parent(vha);
+
+	while (test_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags) ||
+	    test_bit(FCPORT_UPDATE_NEEDED, &pha->dpc_flags))
+		msleep(1000);
 
 	qla24xx_disable_vp(vha);
 	qla24xx_deallocate_vp_id(vha);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 597ac201969..601a6b29750 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3231,7 +3231,8 @@ qla2x00_update_fcports(scsi_qla_host_t *ha)
 
 	/* Go with deferred removal of rport references. */
 	list_for_each_entry(fcport, &ha->fcports, list)
-		if (fcport->drport)
+		if (fcport->drport &&
+		    atomic_read(&fcport->state) != FCS_UNCONFIGURED)
 			qla2x00_rport_del(fcport);
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 6e14c8eaca8..d57669aa461 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -269,7 +269,7 @@ qla2x00_start_scsi(srb_t *sp)
 {
 	int		ret, nseg;
 	unsigned long   flags;
-	scsi_qla_host_t	*ha, *pha;
+	scsi_qla_host_t	*ha;
 	struct scsi_cmnd *cmd;
 	uint32_t	*clr_ptr;
 	uint32_t        index;
@@ -283,7 +283,6 @@ qla2x00_start_scsi(srb_t *sp)
 	/* Setup device pointers. */
 	ret = 0;
 	ha = sp->ha;
-	pha = to_qla_parent(ha);
 	reg = &ha->iobase->isp;
 	cmd = sp->cmd;
 	/* So we know we haven't pci_map'ed anything yet */
@@ -298,7 +297,7 @@ qla2x00_start_scsi(srb_t *sp)
 	}
 
 	/* Acquire ring specific lock */
-	spin_lock_irqsave(&pha->hardware_lock, flags);
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 
 	/* Check for room in outstanding command list. */
 	handle = ha->current_outstanding_cmd;
@@ -387,14 +386,14 @@ qla2x00_start_scsi(srb_t *sp)
 	    ha->response_ring_ptr->signature != RESPONSE_PROCESSED)
 		qla2x00_process_response_queue(ha);
 
-	spin_unlock_irqrestore(&pha->hardware_lock, flags);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	return (QLA_SUCCESS);
 
 queuing_error:
 	if (tot_dsds)
 		scsi_dma_unmap(cmd);
 
-	spin_unlock_irqrestore(&pha->hardware_lock, flags);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	return (QLA_FUNCTION_FAILED);
 }
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7d7de592f72..bc90d6b8d0a 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -749,18 +749,17 @@ qla2x00_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 	uint32_t	handle;
 	mbx_cmd_t	mc;
 	mbx_cmd_t	*mcp = &mc;
-	scsi_qla_host_t *pha = to_qla_parent(ha);
 
 	DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha->host_no));
 
 	fcport = sp->fcport;
 
-	spin_lock_irqsave(&pha->hardware_lock, flags);
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
 		if (ha->outstanding_cmds[handle] == sp)
 			break;
 	}
-	spin_unlock_irqrestore(&pha->hardware_lock, flags);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	if (handle == MAX_OUTSTANDING_COMMANDS) {
 		/* command not found */
@@ -2172,7 +2171,7 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 
 	spin_lock_irqsave(&pha->hardware_lock, flags);
 	for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
-		if (ha->outstanding_cmds[handle] == sp)
+		if (pha->outstanding_cmds[handle] == sp)
 			break;
 	}
 	spin_unlock_irqrestore(&pha->hardware_lock, flags);
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 9a850a24b38..50baf6a1d67 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -106,6 +106,7 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
 		    vha->host_no, fcport->loop_id, fcport->vp_idx));
 
 		qla2x00_mark_device_lost(vha, fcport, 0, 0);
+		atomic_set(&fcport->state, FCS_UNCONFIGURED);
 	}
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 8fc712bbf34..7c8af7ed2a5 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -449,7 +449,7 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	int rval;
 	scsi_qla_host_t *pha = to_qla_parent(ha);
 
-	if (unlikely(pci_channel_offline(ha->pdev))) {
+	if (unlikely(pci_channel_offline(pha->pdev))) {
 		cmd->result = DID_REQUEUE << 16;
 		goto qc24_fail_command;
 	}
@@ -2335,8 +2335,10 @@ qla2x00_do_dpc(void *data)
 			    ha->host_no));
 		}
 
-		if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
+		if (test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags)) {
 			qla2x00_update_fcports(ha);
+			clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
+		}
 
 		if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
 		    (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
-- 
cgit v1.2.3


From 4cfc51017db3e3f4eaaa2cb436a905097a4f08e2 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Thu, 24 Jul 2008 08:31:50 -0700
Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k6.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index ae60229472f..676c390db35 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.02.01-k5"
+#define QLA2XXX_VERSION      "8.02.01-k6"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	2
-- 
cgit v1.2.3


From 37e67b75804b84e092ae9f1d7a19dc3522ef78ab Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 26 Jul 2008 19:37:57 +0800
Subject: drivers/video/fbmem.c: removed duplicated include

Removed duplicated include <linux/major.h>
in drivers/video/fbmem.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/fbmem.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 5d84b343109..6b487801eea 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -35,7 +35,6 @@
 #include <linux/device.h>
 #include <linux/efi.h>
 #include <linux/fb.h>
-#include <linux/major.h>
 
 #include <asm/fb.h>
 
-- 
cgit v1.2.3


From 689796a141cea79d745a4689c65dd01c39e5e100 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sat, 26 Jul 2008 17:15:05 +0200
Subject: dsp56k: Fix BKL pushdown

commit 236b8756a2b6f90498d45b2c36d43e5372f2d4b8 ("dsp56k: BKL pushdown")
removed the `struct inode *inode' parameter from dsp56k_ioctl(), but
forgot to update the use of `inode' in the first line of the function.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/dsp56k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c
index 19b88504e96..ca7c72a486b 100644
--- a/drivers/char/dsp56k.c
+++ b/drivers/char/dsp56k.c
@@ -304,9 +304,9 @@ static ssize_t dsp56k_write(struct file *file, const char __user *buf, size_t co
 }
 
 static long dsp56k_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg)
+			 unsigned long arg)
 {
-	int dev = iminor(inode) & 0x0f;
+	int dev = iminor(file->f_path.dentry->d_inode) & 0x0f;
 	void __user *argp = (void __user *)arg;
 
 	switch(dev)
-- 
cgit v1.2.3


From aafe0ad81d7458b6c61eeb39068432683c70c9a9 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Sat, 12 Jul 2008 11:55:42 +0100
Subject: [ARM] pxa: PXA25x UDC - Fix warning during build

Fixes an unterminated ' warning building PXA25X UDC.

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 include/asm-arm/arch-pxa/pxa25x-udc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h
index 840305916b6..1b80a4805a6 100644
--- a/include/asm-arm/arch-pxa/pxa25x-udc.h
+++ b/include/asm-arm/arch-pxa/pxa25x-udc.h
@@ -2,7 +2,7 @@
 #define _ASM_ARCH_PXA25X_UDC_H
 
 #ifdef _ASM_ARCH_PXA27X_UDC_H
-#error You can't include both PXA25x and PXA27x UDC support
+#error "You can't include both PXA25x and PXA27x UDC support"
 #endif
 
 #define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
-- 
cgit v1.2.3


From e84e954a72153ffd5630df6156720440b430c877 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Mon, 21 Jul 2008 11:02:40 +0100
Subject: [ARM] PXA: squash warning in pxafb

Fixes a warning about using the wrong type in pxafb.c

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 drivers/video/pxafb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 2b707a8ce5d..69de2fed6c5 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1336,7 +1336,7 @@ static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi)
 		fbi->dma_buff_phys = fbi->map_dma;
 		fbi->palette_cpu = (u16 *) fbi->dma_buff->palette;
 
-	        pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16));
+	        pr_debug("pxafb: palette_mem_size = 0x%08x\n", fbi->palette_size*sizeof(u16));
 
 #ifdef CONFIG_FB_PXA_SMARTPANEL
 		fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff;
-- 
cgit v1.2.3


From 1d1f8b377c48e5aeddaea52eba74cc0539f088cd Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Sat, 26 Jul 2008 22:39:58 +0100
Subject: [ARM] update defconfig for eseries.

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/configs/eseries_pxa_defconfig | 1073 ++++++++++++++------------------
 1 file changed, 460 insertions(+), 613 deletions(-)

diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 493ecee24f9..2307587a38a 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -1,15 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh17
-# Fri Nov  9 20:23:03 2007
+# Linux kernel version: 2.6.26
+# Sat Jul 26 22:28:46 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -18,75 +22,90 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -100,6 +119,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
@@ -111,21 +131,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
@@ -133,80 +158,48 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
-CONFIG_TOSHIBA_TMIO_OHCI=y
-CONFIG_ARCH_ESERIES=y
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_ARCH_PXA_ESERIES=y
 CONFIG_MACH_E330=y
+CONFIG_MACH_E350=y
 CONFIG_MACH_E740=y
 CONFIG_MACH_E750=y
 CONFIG_MACH_E400=y
 CONFIG_MACH_E800=y
-CONFIG_E330_LCD=y
-CONFIG_E740_LCD=y
-CONFIG_E750_LCD=y
-CONFIG_E400_LCD=y
-CONFIG_E800_LCD=y
-CONFIG_ESERIES_UDC=y
-CONFIG_E330_TC6387XB=y
-CONFIG_E740_T7L66XB=y
-CONFIG_E400_T7L66XB=y
-CONFIG_E750_E800_TC6393XB=y
-CONFIG_E740_PCMCIA=m
-CONFIG_E750_PCMCIA=m
-CONFIG_E800_PCMCIA=m
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXC550 is not set
-# CONFIG_PXA_SHARPSL is not set
 # CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA25x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
 
 #
-# Linux As Bootloader
+# Power management
 #
-# CONFIG_LAB is not set
 
 #
 # Processor Type
@@ -215,6 +208,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -232,11 +226,9 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
 CONFIG_PCMCIA_LOAD_CIS=y
@@ -245,11 +237,14 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-CONFIG_PCMCIA_PXA2XX=m
 
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -262,9 +257,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -275,7 +274,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
+CONFIG_ATAGS_PROC=y
 
 #
 # CPU Frequency scaling
@@ -304,11 +303,12 @@ CONFIG_BINFMT_MISC=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
-# CONFIG_DPM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -318,13 +318,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -339,35 +339,40 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -380,10 +385,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -391,15 +392,74 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=y
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -408,38 +468,32 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_PARTITIONS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
 # CONFIG_MTD_BLOCK_RO is not set
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -459,7 +513,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -482,82 +535,43 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
@@ -565,7 +579,7 @@ CONFIG_SCSI=m
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=m
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
@@ -579,6 +593,7 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -586,132 +601,78 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
 # CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
+# CONFIG_LIBERTAS is not set
+CONFIG_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
 # CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-# CONFIG_HOSTAP_FIRMWARE is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -719,38 +680,48 @@ CONFIG_NET_WIRELESS=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -763,9 +734,11 @@ CONFIG_TOUCHSCREEN_WM9713=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -777,25 +750,12 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_PXA is not set
-# CONFIG_RS232_SERIAL is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
 
 #
 # PCMCIA character devices
@@ -803,117 +763,79 @@ CONFIG_HW_RANDOM=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
+# I2C GPIO expanders:
 #
 
 #
-# Multimedia Capabilities Port drivers
+# PCI GPIO expanders:
 #
-# CONFIG_ADC is not set
 
 #
-# Compaq/iPAQ Drivers
+# SPI GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Compaq/HP iPAQ Drivers
+# Sonics Silicon Backplane
 #
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+CONFIG_MFD_CORE=y
 # CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-CONFIG_SOC_T7L66XB=y
-# CONFIG_SOC_TC6387XB is not set
-CONFIG_SOC_TC6393XB=y
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
+# CONFIG_HTC_PASIC3 is not set
+CONFIG_MFD_TC6393XB=y
 
 #
-# LED Triggers
+# Multimedia devices
 #
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -923,14 +845,25 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # Frame buffer hardware drivers
 #
-# CONFIG_FB_IMAGEON is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
+# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -938,6 +871,7 @@ CONFIG_FB_W100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
@@ -945,28 +879,13 @@ CONFIG_FONTS=y
 # CONFIG_FONT_6x11 is not set
 # CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
-CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -980,125 +899,75 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
+CONFIG_SND_ARM=y
 # CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC_AC97_BUS=y
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
 CONFIG_SND_PXA2XX_SOC_AC97=m
-CONFIG_SND_PXA2XX_SOC_E740_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E750_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E800_WM9712=m
-# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
-# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
-# CONFIG_SND_PXA2XX_SOC_H5000 is not set
-
-#
-# SoC Audio for the Freescale i.MX
-#
-
-#
-# SoC Audio for the Samsung S3C24XX
-#
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8772 is not set
-# CONFIG_SND_SOC_WM8971 is not set
-# CONFIG_SND_SOC_WM8956 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8976 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8980 is not set
-CONFIG_SND_SOC_WM9705=m
-# CONFIG_SND_SOC_WM9713 is not set
+CONFIG_SND_PXA2XX_SOC_E800=m
 CONFIG_SND_SOC_WM9712=m
-# CONFIG_SND_SOC_UDA1380 is not set
-# CONFIG_SND_SOC_AK4535 is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1107,68 +976,19 @@ CONFIG_USB_DYNAMIC_MINORS=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1192,56 +1012,57 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=y
+CONFIG_USB_PXA25X_SMALL=y
+# CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
 
 #
-# MMC/SD Card support
+# MMC/SD Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-CONFIG_MMC_TMIO=y
-# CONFIG_MMC_SAMCOP is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_PXA is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1255,14 +1076,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1292,7 +1110,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1305,30 +1122,21 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1341,7 +1149,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1363,10 +1170,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1407,30 +1211,32 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -1438,61 +1244,102 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From a9906a19193db69ad0158f289f839edf8aaf103f Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Sat, 26 Jul 2008 14:41:26 -0700
Subject: tracehook: comment fixes

This fixes some typos and errors in <linux/tracehook.h> comments.
No code changes.

Signed-off-by: Roland McGrath <roland@redhat.com>
---
 include/linux/tracehook.h | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 589f429619c..b1875582c1a 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -244,7 +244,7 @@ static inline int tracehook_prepare_clone(unsigned clone_flags)
  * tracehook_finish_clone - new child created and being attached
  * @child:		new child task
  * @clone_flags:	%CLONE_* flags from clone/fork/vfork system call
- * @trace:		return value from tracehook_clone_prepare()
+ * @trace:		return value from tracehook_prepare_clone()
  *
  * This is called immediately after adding @child to its parent's children list.
  * The @trace value is that returned by tracehook_prepare_clone().
@@ -259,19 +259,20 @@ static inline void tracehook_finish_clone(struct task_struct *child,
 
 /**
  * tracehook_report_clone - in parent, new child is about to start running
- * @trace:		return value from tracehook_clone_prepare()
+ * @trace:		return value from tracehook_prepare_clone()
  * @regs:		parent's user register state
  * @clone_flags:	flags from parent's system call
  * @pid:		new child's PID in the parent's namespace
  * @child:		new child task
  *
- * Called after a child is set up, but before it has been started running.
- * The @trace value is that returned by tracehook_clone_prepare().
- * This is not a good place to block, because the child has not started yet.
- * Suspend the child here if desired, and block in tracehook_clone_complete().
- * This must prevent the child from self-reaping if tracehook_clone_complete()
- * uses the @child pointer; otherwise it might have died and been released by
- * the time tracehook_report_clone_complete() is called.
+ * Called after a child is set up, but before it has been started
+ * running.  @trace is the value returned by tracehook_prepare_clone().
+ * This is not a good place to block, because the child has not started
+ * yet.  Suspend the child here if desired, and then block in
+ * tracehook_report_clone_complete().  This must prevent the child from
+ * self-reaping if tracehook_report_clone_complete() uses the @child
+ * pointer; otherwise it might have died and been released by the time
+ * tracehook_report_report_clone_complete() is called.
  *
  * Called with no locks held, but the child cannot run until this returns.
  */
@@ -290,7 +291,7 @@ static inline void tracehook_report_clone(int trace, struct pt_regs *regs,
 
 /**
  * tracehook_report_clone_complete - new child is running
- * @trace:		return value from tracehook_clone_prepare()
+ * @trace:		return value from tracehook_prepare_clone()
  * @regs:		parent's user register state
  * @clone_flags:	flags from parent's system call
  * @pid:		new child's PID in the parent's namespace
@@ -347,7 +348,7 @@ static inline void tracehook_prepare_release_task(struct task_struct *task)
 }
 
 /**
- * tracehook_finish_release_task - task is being reaped, clean up tracing
+ * tracehook_finish_release_task - final tracing clean-up
  * @task:		task in %EXIT_DEAD state
  *
  * This is called in release_task() when @task is being in the middle of
-- 
cgit v1.2.3


From 322069c9df1fd4da269b2a57d78f753684962523 Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Wed, 9 Jul 2008 16:03:13 +0300
Subject: imxmmc: remove DEBUG definition

Removed DEBUG #define #undef, because module is automaticaly
compiled with -DDEBUG when CONFIG_MMC_DEBUG is defined.
Currently it just generates compiler warning about redefinition.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/imxmmc.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index 5e880c0f134..77493339303 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -26,12 +26,6 @@
  *
  */
 
-#ifdef CONFIG_MMC_DEBUG
-#define DEBUG
-#else
-#undef  DEBUG
-#endif
-
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-- 
cgit v1.2.3


From 5fc63dfba8a016caf832572aeaa90abef82f0ba0 Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Wed, 9 Jul 2008 16:03:17 +0300
Subject: imxmmc: fix platform resources

Fixup platform resources handling.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/imxmmc.c | 33 ++++++---------------------------
 1 file changed, 6 insertions(+), 27 deletions(-)

diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index 77493339303..9cda12fba9a 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -901,26 +901,6 @@ static const struct mmc_host_ops imxmci_ops = {
 	.get_ro		= imxmci_get_ro,
 };
 
-static struct resource *platform_device_resource(struct platform_device *dev, unsigned int mask, int nr)
-{
-	int i;
-
-	for (i = 0; i < dev->num_resources; i++)
-		if (dev->resource[i].flags == mask && nr-- == 0)
-			return &dev->resource[i];
-	return NULL;
-}
-
-static int platform_device_irq(struct platform_device *dev, int nr)
-{
-	int i;
-
-	for (i = 0; i < dev->num_resources; i++)
-		if (dev->resource[i].flags == IORESOURCE_IRQ && nr-- == 0)
-			return dev->resource[i].start;
-	return NO_IRQ;
-}
-
 static void imxmci_check_status(unsigned long data)
 {
 	struct imxmci_host *host = (struct imxmci_host *)data;
@@ -956,13 +936,12 @@ static int imxmci_probe(struct platform_device *pdev)
 
 	printk(KERN_INFO "i.MX mmc driver\n");
 
-	r = platform_device_resource(pdev, IORESOURCE_MEM, 0);
-	irq = platform_device_irq(pdev, 0);
-	if (!r || irq == NO_IRQ)
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!r || irq < 0)
 		return -ENXIO;
 
-	r = request_mem_region(r->start, 0x100, "IMXMCI");
-	if (!r)
+	if (!request_mem_region(r->start, 0x100, pdev->name))
 		return -EBUSY;
 
 	mmc = mmc_alloc_host(sizeof(struct imxmci_host), &pdev->dev);
@@ -1067,7 +1046,7 @@ out:
 	}
 	if (mmc)
 		mmc_free_host(mmc);
-	release_resource(r);
+	release_mem_region(r->start, 0x100);
 	return ret;
 }
 
@@ -1096,7 +1075,7 @@ static int imxmci_remove(struct platform_device *pdev)
 		clk_disable(host->clk);
 		clk_put(host->clk);
 
-		release_resource(host->res);
+		release_mem_region(host->res->start, 0x100);
 
 		mmc_free_host(mmc);
 	}
-- 
cgit v1.2.3


From c5d5e9c40fc6cabedd5fdc7441e6e9d37f5c9bba Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Wed, 9 Jul 2008 16:03:20 +0300
Subject: imxmmc: fix crash when no platform data is provided

Don't crash if no platform data is provided.
In this case assume that card is present.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/imxmmc.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index 9cda12fba9a..f61406da65d 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -905,7 +905,8 @@ static void imxmci_check_status(unsigned long data)
 {
 	struct imxmci_host *host = (struct imxmci_host *)data;
 
-	if( host->pdata->card_present(mmc_dev(host->mmc)) != host->present ) {
+	if (host->pdata && host->pdata->card_present &&
+	    host->pdata->card_present(mmc_dev(host->mmc)) != host->present) {
 		host->present ^= 1;
 		dev_info(mmc_dev(host->mmc), "card %s\n",
 		      host->present ? "inserted" : "removed");
@@ -968,6 +969,8 @@ static int imxmci_probe(struct platform_device *pdev)
 	host->mmc = mmc;
 	host->dma_allocated = 0;
 	host->pdata = pdev->dev.platform_data;
+	if (!host->pdata)
+		dev_warn(&pdev->dev, "No platform data provided!\n");
 
 	spin_lock_init(&host->lock);
 	host->res = r;
@@ -1020,7 +1023,11 @@ static int imxmci_probe(struct platform_device *pdev)
 	if (ret)
 		goto out;
 
-	host->present = host->pdata->card_present(mmc_dev(mmc));
+	if (host->pdata && host->pdata->card_present)
+		host->present = host->pdata->card_present(mmc_dev(mmc));
+	else	/* if there is no way to detect assume that card is present */
+		host->present = 1;
+
 	init_timer(&host->timer);
 	host->timer.data = (unsigned long)host;
 	host->timer.function = imxmci_check_status;
-- 
cgit v1.2.3


From 6edd8ee60ac9b974bd6ec3b1bcb2aab02762fa8c Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Thu, 24 Jul 2008 14:18:57 +0200
Subject: mmc: Export internal host state through debugfs

When CONFIG_DEBUG_FS is set, create a few files under /sys/kernel/debug
containing information about an mmc host's internal state. Currently,
just a single file is created, "ios", which contains information about
the current operating parameters for the bus (clock speed, bus width,
etc.)

Host drivers can add additional files and directories under the host's
root directory by passing the debugfs_root field in struct mmc_host as
the 'parent' parameter to debugfs_create_*.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/core/Makefile  |   1 +
 drivers/mmc/core/core.h    |   4 ++
 drivers/mmc/core/debugfs.c | 164 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/mmc/core/host.c    |   8 +++
 include/linux/mmc/host.h   |   2 +
 5 files changed, 179 insertions(+)
 create mode 100644 drivers/mmc/core/debugfs.c

diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index 19a1a254a0c..889e5f898f6 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -12,3 +12,4 @@ mmc_core-y			:= core.o bus.o host.o \
 				   sdio.o sdio_ops.o sdio_bus.o \
 				   sdio_cis.o sdio_io.o sdio_irq.o
 
+mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index cdb332b7ded..745da9881aa 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -52,5 +52,9 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr);
 
 extern int use_spi_crc;
 
+/* Debugfs information for hosts and cards */
+void mmc_add_host_debugfs(struct mmc_host *host);
+void mmc_remove_host_debugfs(struct mmc_host *host);
+
 #endif
 
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
new file mode 100644
index 00000000000..133c6e51f26
--- /dev/null
+++ b/drivers/mmc/core/debugfs.c
@@ -0,0 +1,164 @@
+/*
+ * Debugfs support for hosts and cards
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/stat.h>
+
+#include <linux/mmc/host.h>
+
+#include "core.h"
+
+/* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */
+static int mmc_ios_show(struct seq_file *s, void *data)
+{
+	static const char *vdd_str[] = {
+		[8]	= "2.0",
+		[9]	= "2.1",
+		[10]	= "2.2",
+		[11]	= "2.3",
+		[12]	= "2.4",
+		[13]	= "2.5",
+		[14]	= "2.6",
+		[15]	= "2.7",
+		[16]	= "2.8",
+		[17]	= "2.9",
+		[18]	= "3.0",
+		[19]	= "3.1",
+		[20]	= "3.2",
+		[21]	= "3.3",
+		[22]	= "3.4",
+		[23]	= "3.5",
+		[24]	= "3.6",
+	};
+	struct mmc_host	*host = s->private;
+	struct mmc_ios	*ios = &host->ios;
+	const char *str;
+
+	seq_printf(s, "clock:\t\t%u Hz\n", ios->clock);
+	seq_printf(s, "vdd:\t\t%u ", ios->vdd);
+	if ((1 << ios->vdd) & MMC_VDD_165_195)
+		seq_printf(s, "(1.65 - 1.95 V)\n");
+	else if (ios->vdd < (ARRAY_SIZE(vdd_str) - 1)
+			&& vdd_str[ios->vdd] && vdd_str[ios->vdd + 1])
+		seq_printf(s, "(%s ~ %s V)\n", vdd_str[ios->vdd],
+				vdd_str[ios->vdd + 1]);
+	else
+		seq_printf(s, "(invalid)\n");
+
+	switch (ios->bus_mode) {
+	case MMC_BUSMODE_OPENDRAIN:
+		str = "open drain";
+		break;
+	case MMC_BUSMODE_PUSHPULL:
+		str = "push-pull";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "bus mode:\t%u (%s)\n", ios->bus_mode, str);
+
+	switch (ios->chip_select) {
+	case MMC_CS_DONTCARE:
+		str = "don't care";
+		break;
+	case MMC_CS_HIGH:
+		str = "active high";
+		break;
+	case MMC_CS_LOW:
+		str = "active low";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "chip select:\t%u (%s)\n", ios->chip_select, str);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		str = "off";
+		break;
+	case MMC_POWER_UP:
+		str = "up";
+		break;
+	case MMC_POWER_ON:
+		str = "on";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "power mode:\t%u (%s)\n", ios->power_mode, str);
+	seq_printf(s, "bus width:\t%u (%u bits)\n",
+			ios->bus_width, 1 << ios->bus_width);
+
+	switch (ios->timing) {
+	case MMC_TIMING_LEGACY:
+		str = "legacy";
+		break;
+	case MMC_TIMING_MMC_HS:
+		str = "mmc high-speed";
+		break;
+	case MMC_TIMING_SD_HS:
+		str = "sd high-speed";
+		break;
+	default:
+		str = "invalid";
+		break;
+	}
+	seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str);
+
+	return 0;
+}
+
+static int mmc_ios_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mmc_ios_show, inode->i_private);
+}
+
+static const struct file_operations mmc_ios_fops = {
+	.open		= mmc_ios_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+void mmc_add_host_debugfs(struct mmc_host *host)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir(mmc_hostname(host), NULL);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		/* Complain -- debugfs is enabled, but it failed to
+		 * create the directory. */
+		goto err_root;
+
+	host->debugfs_root = root;
+
+	if (!debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops))
+		goto err_ios;
+
+	return;
+
+err_ios:
+	debugfs_remove_recursive(root);
+	host->debugfs_root = NULL;
+err_root:
+	dev_err(&host->class_dev, "failed to initialize debugfs\n");
+}
+
+void mmc_remove_host_debugfs(struct mmc_host *host)
+{
+	debugfs_remove_recursive(host->debugfs_root);
+}
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 1d795c5379b..6da80fd4d97 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -127,6 +127,10 @@ int mmc_add_host(struct mmc_host *host)
 	if (err)
 		return err;
 
+#ifdef CONFIG_DEBUG_FS
+	mmc_add_host_debugfs(host);
+#endif
+
 	mmc_start_host(host);
 
 	return 0;
@@ -146,6 +150,10 @@ void mmc_remove_host(struct mmc_host *host)
 {
 	mmc_stop_host(host);
 
+#ifdef CONFIG_DEBUG_FS
+	mmc_remove_host_debugfs(host);
+#endif
+
 	device_del(&host->class_dev);
 
 	led_trigger_unregister_simple(host->led);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 10a2080086c..9c288c90987 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -157,6 +157,8 @@ struct mmc_host {
 	struct led_trigger	*led;		/* activity led */
 #endif
 
+	struct dentry		*debugfs_root;
+
 	unsigned long		private[0] ____cacheline_aligned;
 };
 
-- 
cgit v1.2.3


From f4b7f927b531ca350cfc4ca1bdc3377dac7f9a32 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Thu, 24 Jul 2008 14:18:58 +0200
Subject: mmc: Add per-card debugfs support

For each card successfully added to the bus, create a subdirectory under
the host's debugfs root with information about the card.

At the moment, only a single file is added to the card directory for
all cards: "state". It reflects the "state" field in struct mmc_card,
indicating whether the card is present, readonly, etc.

For MMC and SD cards (not SDIO), another file is added: "status".
Reading this file will ask the card about its current status and
return it. This can be useful if the card just refuses to respond to
any commands, which might indicate that the card state is not what the
MMC core thinks it is (due to a missing stop command, for example.)

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/core/bus.c     |  8 ++++++
 drivers/mmc/core/core.h    |  3 +++
 drivers/mmc/core/debugfs.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mmc/card.h   |  2 ++
 4 files changed, 74 insertions(+)

diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index fd95b18e988..0d9b2d6f9eb 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -252,6 +252,10 @@ int mmc_add_card(struct mmc_card *card)
 	if (ret)
 		return ret;
 
+#ifdef CONFIG_DEBUG_FS
+	mmc_add_card_debugfs(card);
+#endif
+
 	mmc_card_set_present(card);
 
 	return 0;
@@ -263,6 +267,10 @@ int mmc_add_card(struct mmc_card *card)
  */
 void mmc_remove_card(struct mmc_card *card)
 {
+#ifdef CONFIG_DEBUG_FS
+	mmc_remove_card_debugfs(card);
+#endif
+
 	if (mmc_card_present(card)) {
 		if (mmc_host_is_spi(card->host)) {
 			printk(KERN_INFO "%s: SPI card removed\n",
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 745da9881aa..c819effa103 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -56,5 +56,8 @@ extern int use_spi_crc;
 void mmc_add_host_debugfs(struct mmc_host *host);
 void mmc_remove_host_debugfs(struct mmc_host *host);
 
+void mmc_add_card_debugfs(struct mmc_card *card);
+void mmc_remove_card_debugfs(struct mmc_card *card);
+
 #endif
 
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 133c6e51f26..1237bb4c722 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -12,9 +12,11 @@
 #include <linux/seq_file.h>
 #include <linux/stat.h>
 
+#include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 
 #include "core.h"
+#include "mmc_ops.h"
 
 /* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */
 static int mmc_ios_show(struct seq_file *s, void *data)
@@ -162,3 +164,62 @@ void mmc_remove_host_debugfs(struct mmc_host *host)
 {
 	debugfs_remove_recursive(host->debugfs_root);
 }
+
+static int mmc_dbg_card_status_get(void *data, u64 *val)
+{
+	struct mmc_card	*card = data;
+	u32		status;
+	int		ret;
+
+	mmc_claim_host(card->host);
+
+	ret = mmc_send_status(data, &status);
+	if (!ret)
+		*val = status;
+
+	mmc_release_host(card->host);
+
+	return ret;
+}
+DEFINE_SIMPLE_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get,
+		NULL, "%08llx\n");
+
+void mmc_add_card_debugfs(struct mmc_card *card)
+{
+	struct mmc_host	*host = card->host;
+	struct dentry	*root;
+
+	if (!host->debugfs_root)
+		return;
+
+	root = debugfs_create_dir(mmc_card_id(card), host->debugfs_root);
+	if (IS_ERR(root))
+		/* Don't complain -- debugfs just isn't enabled */
+		return;
+	if (!root)
+		/* Complain -- debugfs is enabled, but it failed to
+		 * create the directory. */
+		goto err;
+
+	card->debugfs_root = root;
+
+	if (!debugfs_create_x32("state", S_IRUSR, root, &card->state))
+		goto err;
+
+	if (mmc_card_mmc(card) || mmc_card_sd(card))
+		if (!debugfs_create_file("status", S_IRUSR, root, card,
+					&mmc_dbg_card_status_fops))
+			goto err;
+
+	return;
+
+err:
+	debugfs_remove_recursive(root);
+	card->debugfs_root = NULL;
+	dev_err(&card->dev, "failed to initialize debugfs\n");
+}
+
+void mmc_remove_card_debugfs(struct mmc_card *card)
+{
+	debugfs_remove_recursive(card->debugfs_root);
+}
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 0d508ac17d6..ee6e822d599 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -111,6 +111,8 @@ struct mmc_card {
 	unsigned		num_info;	/* number of info strings */
 	const char		**info;		/* info strings */
 	struct sdio_func_tuple	*tuples;	/* unknown common tuples */
+
+	struct dentry		*debugfs_root;
 };
 
 #define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
-- 
cgit v1.2.3


From deec9ae31e6079551ce9260d29a4cf83e5b19a83 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Thu, 24 Jul 2008 14:18:59 +0200
Subject: atmel-mci: debugfs support

Create additional files under the host's debugfs directory containing
additional host-specific debug information.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
---
 drivers/mmc/host/atmel-mci-regs.h |   2 +
 drivers/mmc/host/atmel-mci.c      | 189 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 191 insertions(+)

diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index a9a5657706c..26bd80e6503 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -82,6 +82,8 @@
 # define MCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
 # define MCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
 
+#define MCI_REGS_SIZE		0x100
+
 /* Register access macros */
 #define mci_readl(port,reg)				\
 	__raw_readl((port)->regs + MCI_##reg)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index cce873c5a14..b68381f7bfd 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -9,6 +9,7 @@
  */
 #include <linux/blkdev.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -16,6 +17,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/scatterlist.h>
+#include <linux/seq_file.h>
+#include <linux/stat.h>
 
 #include <linux/mmc/host.h>
 
@@ -88,6 +91,188 @@ struct atmel_mci {
 #define atmci_clear_pending(host, event)			\
 	clear_bit(event, &host->pending_events)
 
+/*
+ * The debugfs stuff below is mostly optimized away when
+ * CONFIG_DEBUG_FS is not set.
+ */
+static int atmci_req_show(struct seq_file *s, void *v)
+{
+	struct atmel_mci	*host = s->private;
+	struct mmc_request	*mrq = host->mrq;
+	struct mmc_command	*cmd;
+	struct mmc_command	*stop;
+	struct mmc_data		*data;
+
+	/* Make sure we get a consistent snapshot */
+	spin_lock_irq(&host->mmc->lock);
+
+	if (mrq) {
+		cmd = mrq->cmd;
+		data = mrq->data;
+		stop = mrq->stop;
+
+		if (cmd)
+			seq_printf(s,
+				"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+				cmd->opcode, cmd->arg, cmd->flags,
+				cmd->resp[0], cmd->resp[1], cmd->resp[2],
+				cmd->resp[2], cmd->error);
+		if (data)
+			seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
+				data->bytes_xfered, data->blocks,
+				data->blksz, data->flags, data->error);
+		if (stop)
+			seq_printf(s,
+				"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+				stop->opcode, stop->arg, stop->flags,
+				stop->resp[0], stop->resp[1], stop->resp[2],
+				stop->resp[2], stop->error);
+	}
+
+	spin_unlock_irq(&host->mmc->lock);
+
+	return 0;
+}
+
+static int atmci_req_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, atmci_req_show, inode->i_private);
+}
+
+static const struct file_operations atmci_req_fops = {
+	.owner		= THIS_MODULE,
+	.open		= atmci_req_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void atmci_show_status_reg(struct seq_file *s,
+		const char *regname, u32 value)
+{
+	static const char	*sr_bit[] = {
+		[0]	= "CMDRDY",
+		[1]	= "RXRDY",
+		[2]	= "TXRDY",
+		[3]	= "BLKE",
+		[4]	= "DTIP",
+		[5]	= "NOTBUSY",
+		[8]	= "SDIOIRQA",
+		[9]	= "SDIOIRQB",
+		[16]	= "RINDE",
+		[17]	= "RDIRE",
+		[18]	= "RCRCE",
+		[19]	= "RENDE",
+		[20]	= "RTOE",
+		[21]	= "DCRCE",
+		[22]	= "DTOE",
+		[30]	= "OVRE",
+		[31]	= "UNRE",
+	};
+	unsigned int		i;
+
+	seq_printf(s, "%s:\t0x%08x", regname, value);
+	for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
+		if (value & (1 << i)) {
+			if (sr_bit[i])
+				seq_printf(s, " %s", sr_bit[i]);
+			else
+				seq_puts(s, " UNKNOWN");
+		}
+	}
+	seq_putc(s, '\n');
+}
+
+static int atmci_regs_show(struct seq_file *s, void *v)
+{
+	struct atmel_mci	*host = s->private;
+	u32			*buf;
+
+	buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/* Grab a more or less consistent snapshot */
+	spin_lock_irq(&host->mmc->lock);
+	memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+	spin_unlock_irq(&host->mmc->lock);
+
+	seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
+			buf[MCI_MR / 4],
+			buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "",
+			buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "",
+			buf[MCI_MR / 4] & 0xff);
+	seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]);
+	seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]);
+	seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]);
+	seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
+			buf[MCI_BLKR / 4],
+			buf[MCI_BLKR / 4] & 0xffff,
+			(buf[MCI_BLKR / 4] >> 16) & 0xffff);
+
+	/* Don't read RSPR and RDR; it will consume the data there */
+
+	atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
+	atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
+
+	return 0;
+}
+
+static int atmci_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, atmci_regs_show, inode->i_private);
+}
+
+static const struct file_operations atmci_regs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= atmci_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void atmci_init_debugfs(struct atmel_mci *host)
+{
+	struct mmc_host	*mmc;
+	struct dentry	*root;
+	struct dentry	*node;
+	struct resource	*res;
+
+	mmc = host->mmc;
+	root = mmc->debugfs_root;
+	if (!root)
+		return;
+
+	node = debugfs_create_file("regs", S_IRUSR, root, host,
+			&atmci_regs_fops);
+	if (IS_ERR(node))
+		return;
+	if (!node)
+		goto err;
+
+	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
+	node->d_inode->i_size = res->end - res->start + 1;
+
+	node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_x32("pending_events", S_IRUSR, root,
+				     (u32 *)&host->pending_events);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_x32("completed_events", S_IRUSR, root,
+				     (u32 *)&host->completed_events);
+	if (!node)
+		goto err;
+
+	return;
+
+err:
+	dev_err(&host->pdev->dev,
+		"failed to initialize debugfs for controller\n");
+}
 
 static void atmci_enable(struct atmel_mci *host)
 {
@@ -905,6 +1090,8 @@ static int __init atmci_probe(struct platform_device *pdev)
 			"Atmel MCI controller at 0x%08lx irq %d\n",
 			host->mapbase, irq);
 
+	atmci_init_debugfs(host);
+
 	return 0;
 
 err_request_irq:
@@ -923,6 +1110,8 @@ static int __exit atmci_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 
 	if (host) {
+		/* Debugfs stuff is cleaned up by mmc core */
+
 		if (host->detect_pin >= 0) {
 			int pin = host->detect_pin;
 
-- 
cgit v1.2.3


From e4ac9bc1f6686dcb8c34e2756aa93cc9546fa6ae Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sat, 26 Jul 2008 18:52:11 +0200
Subject: Add mISDN driver

mISDN is a new modular ISDN driver, in the long term it should replace
the old I4L driver architecture for passiv ISDN cards.

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 Documentation/isdn/README.mISDN | 6 ++++++
 drivers/isdn/Kconfig            | 4 +++-
 drivers/isdn/Makefile           | 1 +
 drivers/isdn/hardware/Makefile  | 1 +
 4 files changed, 11 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/isdn/README.mISDN

diff --git a/Documentation/isdn/README.mISDN b/Documentation/isdn/README.mISDN
new file mode 100644
index 00000000000..cd8bf920e77
--- /dev/null
+++ b/Documentation/isdn/README.mISDN
@@ -0,0 +1,6 @@
+mISDN is a new modular ISDN driver, in the long term it should replace
+the old I4L driver architecture for passiv ISDN cards.
+It was designed to allow a broad range of applications and interfaces
+but only have the basic function in kernel, the interface to the user
+space is based on sockets with a own address family AF_ISDN.
+
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index 66f946aa30b..3d113c6e4a7 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig ISDN
-	tristate "ISDN support"
+	bool "ISDN support"
 	depends on NET
 	depends on !S390
 	---help---
@@ -21,6 +21,8 @@ menuconfig ISDN
 
 if ISDN
 
+source "drivers/isdn/mISDN/Kconfig"
+
 menuconfig ISDN_I4L
 	tristate "Old ISDN4Linux (deprecated)"
 	---help---
diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile
index 988142c30a6..8380a4568d1 100644
--- a/drivers/isdn/Makefile
+++ b/drivers/isdn/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_ISDN_I4L)			+= i4l/
 obj-$(CONFIG_ISDN_CAPI)			+= capi/
+obj-$(CONFIG_MISDN)			+= mISDN/
 obj-$(CONFIG_ISDN_CAPI)			+= hardware/
 obj-$(CONFIG_ISDN_DIVERSION)		+= divert/
 obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax/
diff --git a/drivers/isdn/hardware/Makefile b/drivers/isdn/hardware/Makefile
index 11c8a183948..a5d8fce4c4c 100644
--- a/drivers/isdn/hardware/Makefile
+++ b/drivers/isdn/hardware/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_CAPI_AVM)		+= avm/
 obj-$(CONFIG_CAPI_EICON)	+= eicon/
+obj-$(CONFIG_MISDN)		+= mISDN/
-- 
cgit v1.2.3


From 04578dd330f1ec6bc9c4233833bee0d0ca73ff09 Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sat, 26 Jul 2008 18:52:34 +0200
Subject: Define AF_ISDN and PF_ISDN

Define the address and protocol family value for mISDN.

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 include/linux/socket.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/linux/socket.h b/include/linux/socket.h
index 950af631e7f..dc5086fe773 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -189,7 +189,8 @@ struct ucred {
 #define AF_BLUETOOTH	31	/* Bluetooth sockets 		*/
 #define AF_IUCV		32	/* IUCV sockets			*/
 #define AF_RXRPC	33	/* RxRPC sockets 		*/
-#define AF_MAX		34	/* For now.. */
+#define AF_ISDN		34	/* mISDN sockets 		*/
+#define AF_MAX		35	/* For now.. */
 
 /* Protocol families, same as address families. */
 #define PF_UNSPEC	AF_UNSPEC
@@ -225,6 +226,7 @@ struct ucred {
 #define PF_BLUETOOTH	AF_BLUETOOTH
 #define PF_IUCV		AF_IUCV
 #define PF_RXRPC	AF_RXRPC
+#define PF_ISDN		AF_ISDN
 #define PF_MAX		AF_MAX
 
 /* Maximum queue length specifiable by listen.  */
-- 
cgit v1.2.3


From 1b2b03f8e514e4f68e293846ba511a948b80243c Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sun, 27 Jul 2008 01:54:58 +0200
Subject: Add mISDN core files

Add mISDN core files

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/mISDN/Kconfig     |    9 +
 drivers/isdn/mISDN/Makefile    |    9 +
 drivers/isdn/mISDN/core.c      |  244 +++++
 drivers/isdn/mISDN/core.h      |   77 ++
 drivers/isdn/mISDN/fsm.c       |  183 ++++
 drivers/isdn/mISDN/fsm.h       |   67 ++
 drivers/isdn/mISDN/hwchannel.c |  365 +++++++
 drivers/isdn/mISDN/layer1.c    |  403 ++++++++
 drivers/isdn/mISDN/layer1.h    |   26 +
 drivers/isdn/mISDN/layer2.c    | 2216 ++++++++++++++++++++++++++++++++++++++++
 drivers/isdn/mISDN/layer2.h    |  140 +++
 drivers/isdn/mISDN/socket.c    |  781 ++++++++++++++
 drivers/isdn/mISDN/stack.c     |  674 ++++++++++++
 drivers/isdn/mISDN/tei.c       | 1340 ++++++++++++++++++++++++
 drivers/isdn/mISDN/timerdev.c  |  301 ++++++
 include/linux/mISDNhw.h        |  193 ++++
 include/linux/mISDNif.h        |  487 +++++++++
 17 files changed, 7515 insertions(+)
 create mode 100644 drivers/isdn/mISDN/Kconfig
 create mode 100644 drivers/isdn/mISDN/Makefile
 create mode 100644 drivers/isdn/mISDN/core.c
 create mode 100644 drivers/isdn/mISDN/core.h
 create mode 100644 drivers/isdn/mISDN/fsm.c
 create mode 100644 drivers/isdn/mISDN/fsm.h
 create mode 100644 drivers/isdn/mISDN/hwchannel.c
 create mode 100644 drivers/isdn/mISDN/layer1.c
 create mode 100644 drivers/isdn/mISDN/layer1.h
 create mode 100644 drivers/isdn/mISDN/layer2.c
 create mode 100644 drivers/isdn/mISDN/layer2.h
 create mode 100644 drivers/isdn/mISDN/socket.c
 create mode 100644 drivers/isdn/mISDN/stack.c
 create mode 100644 drivers/isdn/mISDN/tei.c
 create mode 100644 drivers/isdn/mISDN/timerdev.c
 create mode 100644 include/linux/mISDNhw.h
 create mode 100644 include/linux/mISDNif.h

diff --git a/drivers/isdn/mISDN/Kconfig b/drivers/isdn/mISDN/Kconfig
new file mode 100644
index 00000000000..231bd0d0831
--- /dev/null
+++ b/drivers/isdn/mISDN/Kconfig
@@ -0,0 +1,9 @@
+#
+# modularer ISDN driver
+#
+
+menuconfig MISDN
+	tristate "Modular ISDN driver"
+	help
+	  Enable support for the modular ISDN driver.
+
diff --git a/drivers/isdn/mISDN/Makefile b/drivers/isdn/mISDN/Makefile
new file mode 100644
index 00000000000..87c563d3361
--- /dev/null
+++ b/drivers/isdn/mISDN/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the modular ISDN driver
+#
+
+obj-$(CONFIG_MISDN) += mISDN_core.o
+
+# multi objects
+
+mISDN_core-objs := core.o fsm.o socket.o hwchannel.o stack.o layer1.o layer2.o tei.o timerdev.o
diff --git a/drivers/isdn/mISDN/core.c b/drivers/isdn/mISDN/core.c
new file mode 100644
index 00000000000..33068177b7c
--- /dev/null
+++ b/drivers/isdn/mISDN/core.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/mISDNif.h>
+#include "core.h"
+
+static u_int debug;
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL");
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+
+static LIST_HEAD(devices);
+DEFINE_RWLOCK(device_lock);
+static u64		device_ids;
+#define MAX_DEVICE_ID	63
+
+static LIST_HEAD(Bprotocols);
+DEFINE_RWLOCK(bp_lock);
+
+struct mISDNdevice
+*get_mdevice(u_int id)
+{
+	struct mISDNdevice	*dev;
+
+	read_lock(&device_lock);
+	list_for_each_entry(dev, &devices, D.list)
+		if (dev->id == id) {
+			read_unlock(&device_lock);
+			return dev;
+		}
+	read_unlock(&device_lock);
+	return NULL;
+}
+
+int
+get_mdevice_count(void)
+{
+	struct mISDNdevice	*dev;
+	int			cnt = 0;
+
+	read_lock(&device_lock);
+	list_for_each_entry(dev, &devices, D.list)
+		cnt++;
+	read_unlock(&device_lock);
+	return cnt;
+}
+
+static int
+get_free_devid(void)
+{
+	u_int	i;
+
+	for (i = 0; i <= MAX_DEVICE_ID; i++)
+		if (!test_and_set_bit(i, (u_long *)&device_ids))
+			return i;
+	return -1;
+}
+
+int
+mISDN_register_device(struct mISDNdevice *dev, char *name)
+{
+	u_long	flags;
+	int	err;
+
+	dev->id = get_free_devid();
+	if (dev->id < 0)
+		return -EBUSY;
+	if (name && name[0])
+		strcpy(dev->name, name);
+	else
+		sprintf(dev->name, "mISDN%d", dev->id);
+	if (debug & DEBUG_CORE)
+		printk(KERN_DEBUG "mISDN_register %s %d\n",
+			dev->name, dev->id);
+	err = create_stack(dev);
+	if (err)
+		return err;
+	write_lock_irqsave(&device_lock, flags);
+	list_add_tail(&dev->D.list, &devices);
+	write_unlock_irqrestore(&device_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_register_device);
+
+void
+mISDN_unregister_device(struct mISDNdevice *dev) {
+	u_long	flags;
+
+	if (debug & DEBUG_CORE)
+		printk(KERN_DEBUG "mISDN_unregister %s %d\n",
+			dev->name, dev->id);
+	write_lock_irqsave(&device_lock, flags);
+	list_del(&dev->D.list);
+	write_unlock_irqrestore(&device_lock, flags);
+	test_and_clear_bit(dev->id, (u_long *)&device_ids);
+	delete_stack(dev);
+}
+EXPORT_SYMBOL(mISDN_unregister_device);
+
+u_int
+get_all_Bprotocols(void)
+{
+	struct Bprotocol	*bp;
+	u_int	m = 0;
+
+	read_lock(&bp_lock);
+	list_for_each_entry(bp, &Bprotocols, list)
+		m |= bp->Bprotocols;
+	read_unlock(&bp_lock);
+	return m;
+}
+
+struct Bprotocol *
+get_Bprotocol4mask(u_int m)
+{
+	struct Bprotocol	*bp;
+
+	read_lock(&bp_lock);
+	list_for_each_entry(bp, &Bprotocols, list)
+		if (bp->Bprotocols & m) {
+			read_unlock(&bp_lock);
+			return bp;
+		}
+	read_unlock(&bp_lock);
+	return NULL;
+}
+
+struct Bprotocol *
+get_Bprotocol4id(u_int id)
+{
+	u_int	m;
+
+	if (id < ISDN_P_B_START || id > 63) {
+		printk(KERN_WARNING "%s id not in range  %d\n",
+		    __func__, id);
+		return NULL;
+	}
+	m = 1 << (id & ISDN_P_B_MASK);
+	return get_Bprotocol4mask(m);
+}
+
+int
+mISDN_register_Bprotocol(struct Bprotocol *bp)
+{
+	u_long			flags;
+	struct Bprotocol	*old;
+
+	if (debug & DEBUG_CORE)
+		printk(KERN_DEBUG "%s: %s/%x\n", __func__,
+		    bp->name, bp->Bprotocols);
+	old = get_Bprotocol4mask(bp->Bprotocols);
+	if (old) {
+		printk(KERN_WARNING
+		    "register duplicate protocol old %s/%x new %s/%x\n",
+		    old->name, old->Bprotocols, bp->name, bp->Bprotocols);
+		return -EBUSY;
+	}
+	write_lock_irqsave(&bp_lock, flags);
+	list_add_tail(&bp->list, &Bprotocols);
+	write_unlock_irqrestore(&bp_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_register_Bprotocol);
+
+void
+mISDN_unregister_Bprotocol(struct Bprotocol *bp)
+{
+	u_long	flags;
+
+	if (debug & DEBUG_CORE)
+		printk(KERN_DEBUG "%s: %s/%x\n", __func__, bp->name,
+			bp->Bprotocols);
+	write_lock_irqsave(&bp_lock, flags);
+	list_del(&bp->list);
+	write_unlock_irqrestore(&bp_lock, flags);
+}
+EXPORT_SYMBOL(mISDN_unregister_Bprotocol);
+
+int
+mISDNInit(void)
+{
+	int	err;
+
+	printk(KERN_INFO "Modular ISDN core version %d.%d.%d\n",
+		MISDN_MAJOR_VERSION, MISDN_MINOR_VERSION, MISDN_RELEASE);
+	mISDN_initstack(&debug);
+	err = mISDN_inittimer(&debug);
+	if (err)
+		goto error;
+	err = l1_init(&debug);
+	if (err) {
+		mISDN_timer_cleanup();
+		goto error;
+	}
+	err = Isdnl2_Init(&debug);
+	if (err) {
+		mISDN_timer_cleanup();
+		l1_cleanup();
+		goto error;
+	}
+	err = misdn_sock_init(&debug);
+	if (err) {
+		mISDN_timer_cleanup();
+		l1_cleanup();
+		Isdnl2_cleanup();
+	}
+error:
+	return err;
+}
+
+void mISDN_cleanup(void)
+{
+	misdn_sock_cleanup();
+	mISDN_timer_cleanup();
+	l1_cleanup();
+	Isdnl2_cleanup();
+
+	if (!list_empty(&devices))
+		printk(KERN_ERR "%s devices still registered\n", __func__);
+
+	if (!list_empty(&Bprotocols))
+		printk(KERN_ERR "%s Bprotocols still registered\n", __func__);
+	printk(KERN_DEBUG "mISDNcore unloaded\n");
+}
+
+module_init(mISDNInit);
+module_exit(mISDN_cleanup);
+
diff --git a/drivers/isdn/mISDN/core.h b/drivers/isdn/mISDN/core.h
new file mode 100644
index 00000000000..7da7233b4c1
--- /dev/null
+++ b/drivers/isdn/mISDN/core.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef mISDN_CORE_H
+#define mISDN_CORE_H
+
+extern struct mISDNdevice	*get_mdevice(u_int);
+extern int			get_mdevice_count(void);
+
+/* stack status flag */
+#define mISDN_STACK_ACTION_MASK		0x0000ffff
+#define mISDN_STACK_COMMAND_MASK	0x000f0000
+#define mISDN_STACK_STATUS_MASK		0xfff00000
+/* action bits 0-15 */
+#define mISDN_STACK_WORK	0
+#define mISDN_STACK_SETUP	1
+#define mISDN_STACK_CLEARING	2
+#define mISDN_STACK_RESTART	3
+#define mISDN_STACK_WAKEUP	4
+#define mISDN_STACK_ABORT	15
+/* command bits 16-19 */
+#define mISDN_STACK_STOPPED	16
+#define mISDN_STACK_INIT	17
+#define mISDN_STACK_THREADSTART	18
+/* status bits 20-31 */
+#define mISDN_STACK_BCHANNEL	20
+#define mISDN_STACK_ACTIVE      29
+#define mISDN_STACK_RUNNING     30
+#define mISDN_STACK_KILLED      31
+
+
+/* manager options */
+#define MGR_OPT_USER		24
+#define MGR_OPT_NETWORK		25
+
+extern int	connect_Bstack(struct mISDNdevice *, struct mISDNchannel *,
+			u_int, struct sockaddr_mISDN *);
+extern int	connect_layer1(struct mISDNdevice *, struct mISDNchannel *,
+			u_int, struct sockaddr_mISDN *);
+extern int	create_l2entity(struct mISDNdevice *, struct mISDNchannel *,
+			u_int, struct sockaddr_mISDN *);
+
+extern int	create_stack(struct mISDNdevice *);
+extern int	create_teimanager(struct mISDNdevice *);
+extern void	delete_teimanager(struct mISDNchannel *);
+extern void	delete_channel(struct mISDNchannel *);
+extern void	delete_stack(struct mISDNdevice *);
+extern void	mISDN_initstack(u_int *);
+extern int      misdn_sock_init(u_int *);
+extern void     misdn_sock_cleanup(void);
+extern void	add_layer2(struct mISDNchannel *, struct mISDNstack *);
+extern void	__add_layer2(struct mISDNchannel *, struct mISDNstack *);
+
+extern u_int		get_all_Bprotocols(void);
+struct Bprotocol	*get_Bprotocol4mask(u_int);
+struct Bprotocol	*get_Bprotocol4id(u_int);
+
+extern int	mISDN_inittimer(u_int *);
+extern void	mISDN_timer_cleanup(void);
+
+extern int	l1_init(u_int *);
+extern void	l1_cleanup(void);
+extern int 	Isdnl2_Init(u_int *);
+extern void	Isdnl2_cleanup(void);
+
+#endif
diff --git a/drivers/isdn/mISDN/fsm.c b/drivers/isdn/mISDN/fsm.c
new file mode 100644
index 00000000000..b5d6553f2dc
--- /dev/null
+++ b/drivers/isdn/mISDN/fsm.c
@@ -0,0 +1,183 @@
+/*
+ * finite state machine implementation
+ *
+ * Author       Karsten Keil <kkeil@novell.com>
+ *
+ * Thanks to    Jan den Ouden
+ *              Fritz Elfert
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include "fsm.h"
+
+#define FSM_TIMER_DEBUG 0
+
+void
+mISDN_FsmNew(struct Fsm *fsm,
+       struct FsmNode *fnlist, int fncount)
+{
+	int i;
+
+	fsm->jumpmatrix = kzalloc(sizeof(FSMFNPTR) * fsm->state_count *
+		fsm->event_count, GFP_KERNEL);
+
+	for (i = 0; i < fncount; i++)
+		if ((fnlist[i].state >= fsm->state_count) ||
+		    (fnlist[i].event >= fsm->event_count)) {
+			printk(KERN_ERR
+			    "mISDN_FsmNew Error: %d st(%ld/%ld) ev(%ld/%ld)\n",
+			    i, (long)fnlist[i].state, (long)fsm->state_count,
+			    (long)fnlist[i].event, (long)fsm->event_count);
+		} else
+			fsm->jumpmatrix[fsm->state_count * fnlist[i].event +
+			    fnlist[i].state] = (FSMFNPTR) fnlist[i].routine;
+}
+EXPORT_SYMBOL(mISDN_FsmNew);
+
+void
+mISDN_FsmFree(struct Fsm *fsm)
+{
+	kfree((void *) fsm->jumpmatrix);
+}
+EXPORT_SYMBOL(mISDN_FsmFree);
+
+int
+mISDN_FsmEvent(struct FsmInst *fi, int event, void *arg)
+{
+	FSMFNPTR r;
+
+	if ((fi->state >= fi->fsm->state_count) ||
+	    (event >= fi->fsm->event_count)) {
+		printk(KERN_ERR
+		    "mISDN_FsmEvent Error st(%ld/%ld) ev(%d/%ld)\n",
+		    (long)fi->state, (long)fi->fsm->state_count, event,
+		    (long)fi->fsm->event_count);
+		return 1;
+	}
+	r = fi->fsm->jumpmatrix[fi->fsm->state_count * event + fi->state];
+	if (r) {
+		if (fi->debug)
+			fi->printdebug(fi, "State %s Event %s",
+				fi->fsm->strState[fi->state],
+				fi->fsm->strEvent[event]);
+		r(fi, event, arg);
+		return 0;
+	} else {
+		if (fi->debug)
+			fi->printdebug(fi, "State %s Event %s no action",
+				fi->fsm->strState[fi->state],
+				fi->fsm->strEvent[event]);
+		return 1;
+	}
+}
+EXPORT_SYMBOL(mISDN_FsmEvent);
+
+void
+mISDN_FsmChangeState(struct FsmInst *fi, int newstate)
+{
+	fi->state = newstate;
+	if (fi->debug)
+		fi->printdebug(fi, "ChangeState %s",
+			fi->fsm->strState[newstate]);
+}
+EXPORT_SYMBOL(mISDN_FsmChangeState);
+
+static void
+FsmExpireTimer(struct FsmTimer *ft)
+{
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "FsmExpireTimer %lx", (long) ft);
+#endif
+	mISDN_FsmEvent(ft->fi, ft->event, ft->arg);
+}
+
+void
+mISDN_FsmInitTimer(struct FsmInst *fi, struct FsmTimer *ft)
+{
+	ft->fi = fi;
+	ft->tl.function = (void *) FsmExpireTimer;
+	ft->tl.data = (long) ft;
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "mISDN_FsmInitTimer %lx", (long) ft);
+#endif
+	init_timer(&ft->tl);
+}
+EXPORT_SYMBOL(mISDN_FsmInitTimer);
+
+void
+mISDN_FsmDelTimer(struct FsmTimer *ft, int where)
+{
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "mISDN_FsmDelTimer %lx %d",
+			(long) ft, where);
+#endif
+	del_timer(&ft->tl);
+}
+EXPORT_SYMBOL(mISDN_FsmDelTimer);
+
+int
+mISDN_FsmAddTimer(struct FsmTimer *ft,
+	    int millisec, int event, void *arg, int where)
+{
+
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "mISDN_FsmAddTimer %lx %d %d",
+			(long) ft, millisec, where);
+#endif
+
+	if (timer_pending(&ft->tl)) {
+		if (ft->fi->debug) {
+			printk(KERN_WARNING
+				"mISDN_FsmAddTimer: timer already active!\n");
+			ft->fi->printdebug(ft->fi,
+				"mISDN_FsmAddTimer already active!");
+		}
+		return -1;
+	}
+	init_timer(&ft->tl);
+	ft->event = event;
+	ft->arg = arg;
+	ft->tl.expires = jiffies + (millisec * HZ) / 1000;
+	add_timer(&ft->tl);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_FsmAddTimer);
+
+void
+mISDN_FsmRestartTimer(struct FsmTimer *ft,
+	    int millisec, int event, void *arg, int where)
+{
+
+#if FSM_TIMER_DEBUG
+	if (ft->fi->debug)
+		ft->fi->printdebug(ft->fi, "mISDN_FsmRestartTimer %lx %d %d",
+			(long) ft, millisec, where);
+#endif
+
+	if (timer_pending(&ft->tl))
+		del_timer(&ft->tl);
+	init_timer(&ft->tl);
+	ft->event = event;
+	ft->arg = arg;
+	ft->tl.expires = jiffies + (millisec * HZ) / 1000;
+	add_timer(&ft->tl);
+}
+EXPORT_SYMBOL(mISDN_FsmRestartTimer);
diff --git a/drivers/isdn/mISDN/fsm.h b/drivers/isdn/mISDN/fsm.h
new file mode 100644
index 00000000000..928f5be192c
--- /dev/null
+++ b/drivers/isdn/mISDN/fsm.h
@@ -0,0 +1,67 @@
+/*
+ *
+ * Author       Karsten Keil <kkeil@novell.com>
+ *
+ * Thanks to    Jan den Ouden
+ *              Fritz Elfert
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _MISDN_FSM_H
+#define _MISDN_FSM_H
+
+#include <linux/timer.h>
+
+/* Statemachine */
+
+struct FsmInst;
+
+typedef void (*FSMFNPTR)(struct FsmInst *, int, void *);
+
+struct Fsm {
+	FSMFNPTR *jumpmatrix;
+	int state_count, event_count;
+	char **strEvent, **strState;
+};
+
+struct FsmInst {
+	struct Fsm *fsm;
+	int state;
+	int debug;
+	void *userdata;
+	int userint;
+	void (*printdebug) (struct FsmInst *, char *, ...);
+};
+
+struct FsmNode {
+	int state, event;
+	void (*routine) (struct FsmInst *, int, void *);
+};
+
+struct FsmTimer {
+	struct FsmInst *fi;
+	struct timer_list tl;
+	int event;
+	void *arg;
+};
+
+extern void mISDN_FsmNew(struct Fsm *, struct FsmNode *, int);
+extern void mISDN_FsmFree(struct Fsm *);
+extern int mISDN_FsmEvent(struct FsmInst *, int , void *);
+extern void mISDN_FsmChangeState(struct FsmInst *, int);
+extern void mISDN_FsmInitTimer(struct FsmInst *, struct FsmTimer *);
+extern int mISDN_FsmAddTimer(struct FsmTimer *, int, int, void *, int);
+extern void mISDN_FsmRestartTimer(struct FsmTimer *, int, int, void *, int);
+extern void mISDN_FsmDelTimer(struct FsmTimer *, int);
+
+#endif
diff --git a/drivers/isdn/mISDN/hwchannel.c b/drivers/isdn/mISDN/hwchannel.c
new file mode 100644
index 00000000000..2596fba4e61
--- /dev/null
+++ b/drivers/isdn/mISDN/hwchannel.c
@@ -0,0 +1,365 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/mISDNhw.h>
+
+static void
+dchannel_bh(struct work_struct *ws)
+{
+	struct dchannel	*dch  = container_of(ws, struct dchannel, workq);
+	struct sk_buff	*skb;
+	int		err;
+
+	if (test_and_clear_bit(FLG_RECVQUEUE, &dch->Flags)) {
+		while ((skb = skb_dequeue(&dch->rqueue))) {
+			if (likely(dch->dev.D.peer)) {
+				err = dch->dev.D.recv(dch->dev.D.peer, skb);
+				if (err)
+					dev_kfree_skb(skb);
+			} else
+				dev_kfree_skb(skb);
+		}
+	}
+	if (test_and_clear_bit(FLG_PHCHANGE, &dch->Flags)) {
+		if (dch->phfunc)
+			dch->phfunc(dch);
+	}
+}
+
+static void
+bchannel_bh(struct work_struct *ws)
+{
+	struct bchannel	*bch  = container_of(ws, struct bchannel, workq);
+	struct sk_buff	*skb;
+	int		err;
+
+	if (test_and_clear_bit(FLG_RECVQUEUE, &bch->Flags)) {
+		while ((skb = skb_dequeue(&bch->rqueue))) {
+			if (bch->rcount >= 64)
+				printk(KERN_WARNING "B-channel %p receive "
+					"queue if full, but empties...\n", bch);
+			bch->rcount--;
+			if (likely(bch->ch.peer)) {
+				err = bch->ch.recv(bch->ch.peer, skb);
+				if (err)
+					dev_kfree_skb(skb);
+			} else
+				dev_kfree_skb(skb);
+		}
+	}
+}
+
+int
+mISDN_initdchannel(struct dchannel *ch, int maxlen, void *phf)
+{
+	test_and_set_bit(FLG_HDLC, &ch->Flags);
+	ch->maxlen = maxlen;
+	ch->hw = NULL;
+	ch->rx_skb = NULL;
+	ch->tx_skb = NULL;
+	ch->tx_idx = 0;
+	ch->phfunc = phf;
+	skb_queue_head_init(&ch->squeue);
+	skb_queue_head_init(&ch->rqueue);
+	INIT_LIST_HEAD(&ch->dev.bchannels);
+	INIT_WORK(&ch->workq, dchannel_bh);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_initdchannel);
+
+int
+mISDN_initbchannel(struct bchannel *ch, int maxlen)
+{
+	ch->Flags = 0;
+	ch->maxlen = maxlen;
+	ch->hw = NULL;
+	ch->rx_skb = NULL;
+	ch->tx_skb = NULL;
+	ch->tx_idx = 0;
+	skb_queue_head_init(&ch->rqueue);
+	ch->rcount = 0;
+	ch->next_skb = NULL;
+	INIT_WORK(&ch->workq, bchannel_bh);
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_initbchannel);
+
+int
+mISDN_freedchannel(struct dchannel *ch)
+{
+	if (ch->tx_skb) {
+		dev_kfree_skb(ch->tx_skb);
+		ch->tx_skb = NULL;
+	}
+	if (ch->rx_skb) {
+		dev_kfree_skb(ch->rx_skb);
+		ch->rx_skb = NULL;
+	}
+	skb_queue_purge(&ch->squeue);
+	skb_queue_purge(&ch->rqueue);
+	flush_scheduled_work();
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_freedchannel);
+
+int
+mISDN_freebchannel(struct bchannel *ch)
+{
+	if (ch->tx_skb) {
+		dev_kfree_skb(ch->tx_skb);
+		ch->tx_skb = NULL;
+	}
+	if (ch->rx_skb) {
+		dev_kfree_skb(ch->rx_skb);
+		ch->rx_skb = NULL;
+	}
+	if (ch->next_skb) {
+		dev_kfree_skb(ch->next_skb);
+		ch->next_skb = NULL;
+	}
+	skb_queue_purge(&ch->rqueue);
+	ch->rcount = 0;
+	flush_scheduled_work();
+	return 0;
+}
+EXPORT_SYMBOL(mISDN_freebchannel);
+
+static inline u_int
+get_sapi_tei(u_char *p)
+{
+	u_int	sapi, tei;
+
+	sapi = *p >> 2;
+	tei = p[1] >> 1;
+	return sapi | (tei << 8);
+}
+
+void
+recv_Dchannel(struct dchannel *dch)
+{
+	struct mISDNhead *hh;
+
+	if (dch->rx_skb->len < 2) { /* at least 2 for sapi / tei */
+		dev_kfree_skb(dch->rx_skb);
+		dch->rx_skb = NULL;
+		return;
+	}
+	hh = mISDN_HEAD_P(dch->rx_skb);
+	hh->prim = PH_DATA_IND;
+	hh->id = get_sapi_tei(dch->rx_skb->data);
+	skb_queue_tail(&dch->rqueue, dch->rx_skb);
+	dch->rx_skb = NULL;
+	schedule_event(dch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(recv_Dchannel);
+
+void
+recv_Bchannel(struct bchannel *bch)
+{
+	struct mISDNhead *hh;
+
+	hh = mISDN_HEAD_P(bch->rx_skb);
+	hh->prim = PH_DATA_IND;
+	hh->id = MISDN_ID_ANY;
+	if (bch->rcount >= 64) {
+		dev_kfree_skb(bch->rx_skb);
+		bch->rx_skb = NULL;
+		return;
+	}
+	bch->rcount++;
+	skb_queue_tail(&bch->rqueue, bch->rx_skb);
+	bch->rx_skb = NULL;
+	schedule_event(bch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(recv_Bchannel);
+
+void
+recv_Dchannel_skb(struct dchannel *dch, struct sk_buff *skb)
+{
+	skb_queue_tail(&dch->rqueue, skb);
+	schedule_event(dch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(recv_Dchannel_skb);
+
+void
+recv_Bchannel_skb(struct bchannel *bch, struct sk_buff *skb)
+{
+	if (bch->rcount >= 64) {
+		dev_kfree_skb(skb);
+		return;
+	}
+	bch->rcount++;
+	skb_queue_tail(&bch->rqueue, skb);
+	schedule_event(bch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(recv_Bchannel_skb);
+
+static void
+confirm_Dsend(struct dchannel *dch)
+{
+	struct sk_buff	*skb;
+
+	skb = _alloc_mISDN_skb(PH_DATA_CNF, mISDN_HEAD_ID(dch->tx_skb),
+	    0, NULL, GFP_ATOMIC);
+	if (!skb) {
+		printk(KERN_ERR "%s: no skb id %x\n", __func__,
+		    mISDN_HEAD_ID(dch->tx_skb));
+		return;
+	}
+	skb_queue_tail(&dch->rqueue, skb);
+	schedule_event(dch, FLG_RECVQUEUE);
+}
+
+int
+get_next_dframe(struct dchannel *dch)
+{
+	dch->tx_idx = 0;
+	dch->tx_skb = skb_dequeue(&dch->squeue);
+	if (dch->tx_skb) {
+		confirm_Dsend(dch);
+		return 1;
+	}
+	dch->tx_skb = NULL;
+	test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+	return 0;
+}
+EXPORT_SYMBOL(get_next_dframe);
+
+void
+confirm_Bsend(struct bchannel *bch)
+{
+	struct sk_buff	*skb;
+
+	if (bch->rcount >= 64)
+		return;
+	skb = _alloc_mISDN_skb(PH_DATA_CNF, mISDN_HEAD_ID(bch->tx_skb),
+	    0, NULL, GFP_ATOMIC);
+	if (!skb) {
+		printk(KERN_ERR "%s: no skb id %x\n", __func__,
+		    mISDN_HEAD_ID(bch->tx_skb));
+		return;
+	}
+	bch->rcount++;
+	skb_queue_tail(&bch->rqueue, skb);
+	schedule_event(bch, FLG_RECVQUEUE);
+}
+EXPORT_SYMBOL(confirm_Bsend);
+
+int
+get_next_bframe(struct bchannel *bch)
+{
+	bch->tx_idx = 0;
+	if (test_bit(FLG_TX_NEXT, &bch->Flags)) {
+		bch->tx_skb = bch->next_skb;
+		if (bch->tx_skb) {
+			bch->next_skb = NULL;
+			test_and_clear_bit(FLG_TX_NEXT, &bch->Flags);
+			if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+				confirm_Bsend(bch); /* not for transparent */
+			return 1;
+		} else {
+			test_and_clear_bit(FLG_TX_NEXT, &bch->Flags);
+			printk(KERN_WARNING "B TX_NEXT without skb\n");
+		}
+	}
+	bch->tx_skb = NULL;
+	test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+	return 0;
+}
+EXPORT_SYMBOL(get_next_bframe);
+
+void
+queue_ch_frame(struct mISDNchannel *ch, u_int pr, int id, struct sk_buff *skb)
+{
+	struct mISDNhead *hh;
+
+	if (!skb) {
+		_queue_data(ch, pr, id, 0, NULL, GFP_ATOMIC);
+	} else {
+		if (ch->peer) {
+			hh = mISDN_HEAD_P(skb);
+			hh->prim = pr;
+			hh->id = id;
+			if (!ch->recv(ch->peer, skb))
+				return;
+		}
+		dev_kfree_skb(skb);
+	}
+}
+EXPORT_SYMBOL(queue_ch_frame);
+
+int
+dchannel_senddata(struct dchannel *ch, struct sk_buff *skb)
+{
+	/* check oversize */
+	if (skb->len <= 0) {
+		printk(KERN_WARNING "%s: skb too small\n", __func__);
+		return -EINVAL;
+	}
+	if (skb->len > ch->maxlen) {
+		printk(KERN_WARNING "%s: skb too large(%d/%d)\n",
+			__func__, skb->len, ch->maxlen);
+		return -EINVAL;
+	}
+	/* HW lock must be obtained */
+	if (test_and_set_bit(FLG_TX_BUSY, &ch->Flags)) {
+		skb_queue_tail(&ch->squeue, skb);
+		return 0;
+	} else {
+		/* write to fifo */
+		ch->tx_skb = skb;
+		ch->tx_idx = 0;
+		return 1;
+	}
+}
+EXPORT_SYMBOL(dchannel_senddata);
+
+int
+bchannel_senddata(struct bchannel *ch, struct sk_buff *skb)
+{
+
+	/* check oversize */
+	if (skb->len <= 0) {
+		printk(KERN_WARNING "%s: skb too small\n", __func__);
+		return -EINVAL;
+	}
+	if (skb->len > ch->maxlen) {
+		printk(KERN_WARNING "%s: skb too large(%d/%d)\n",
+			__func__, skb->len, ch->maxlen);
+		return -EINVAL;
+	}
+	/* HW lock must be obtained */
+	/* check for pending next_skb */
+	if (ch->next_skb) {
+		printk(KERN_WARNING
+		    "%s: next_skb exist ERROR (skb->len=%d next_skb->len=%d)\n",
+		    __func__, skb->len, ch->next_skb->len);
+		return -EBUSY;
+	}
+	if (test_and_set_bit(FLG_TX_BUSY, &ch->Flags)) {
+		test_and_set_bit(FLG_TX_NEXT, &ch->Flags);
+		ch->next_skb = skb;
+		return 0;
+	} else {
+		/* write to fifo */
+		ch->tx_skb = skb;
+		ch->tx_idx = 0;
+		return 1;
+	}
+}
+EXPORT_SYMBOL(bchannel_senddata);
diff --git a/drivers/isdn/mISDN/layer1.c b/drivers/isdn/mISDN/layer1.c
new file mode 100644
index 00000000000..fced1a2755f
--- /dev/null
+++ b/drivers/isdn/mISDN/layer1.c
@@ -0,0 +1,403 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/mISDNhw.h>
+#include "layer1.h"
+#include "fsm.h"
+
+static int *debug;
+
+struct layer1 {
+	u_long			Flags;
+	struct FsmInst		l1m;
+	struct FsmTimer 	timer;
+	int			delay;
+	struct dchannel		*dch;
+	dchannel_l1callback	*dcb;
+};
+
+#define TIMER3_VALUE 7000
+
+static
+struct Fsm l1fsm_s = {NULL, 0, 0, NULL, NULL};
+
+enum {
+	ST_L1_F2,
+	ST_L1_F3,
+	ST_L1_F4,
+	ST_L1_F5,
+	ST_L1_F6,
+	ST_L1_F7,
+	ST_L1_F8,
+};
+
+#define L1S_STATE_COUNT (ST_L1_F8+1)
+
+static char *strL1SState[] =
+{
+	"ST_L1_F2",
+	"ST_L1_F3",
+	"ST_L1_F4",
+	"ST_L1_F5",
+	"ST_L1_F6",
+	"ST_L1_F7",
+	"ST_L1_F8",
+};
+
+enum {
+	EV_PH_ACTIVATE,
+	EV_PH_DEACTIVATE,
+	EV_RESET_IND,
+	EV_DEACT_CNF,
+	EV_DEACT_IND,
+	EV_POWER_UP,
+	EV_ANYSIG_IND,
+	EV_INFO2_IND,
+	EV_INFO4_IND,
+	EV_TIMER_DEACT,
+	EV_TIMER_ACT,
+	EV_TIMER3,
+};
+
+#define L1_EVENT_COUNT (EV_TIMER3 + 1)
+
+static char *strL1Event[] =
+{
+	"EV_PH_ACTIVATE",
+	"EV_PH_DEACTIVATE",
+	"EV_RESET_IND",
+	"EV_DEACT_CNF",
+	"EV_DEACT_IND",
+	"EV_POWER_UP",
+	"EV_ANYSIG_IND",
+	"EV_INFO2_IND",
+	"EV_INFO4_IND",
+	"EV_TIMER_DEACT",
+	"EV_TIMER_ACT",
+	"EV_TIMER3",
+};
+
+static void
+l1m_debug(struct FsmInst *fi, char *fmt, ...)
+{
+	struct layer1 *l1 = fi->userdata;
+	va_list va;
+
+	va_start(va, fmt);
+	printk(KERN_DEBUG "%s: ", l1->dch->dev.name);
+	vprintk(fmt, va);
+	printk("\n");
+	va_end(va);
+}
+
+static void
+l1_reset(struct FsmInst *fi, int event, void *arg)
+{
+	mISDN_FsmChangeState(fi, ST_L1_F3);
+}
+
+static void
+l1_deact_cnf(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L1_F3);
+	if (test_bit(FLG_L1_ACTIVATING, &l1->Flags))
+		l1->dcb(l1->dch, HW_POWERUP_REQ);
+}
+
+static void
+l1_deact_req_s(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L1_F3);
+	mISDN_FsmRestartTimer(&l1->timer, 550, EV_TIMER_DEACT, NULL, 2);
+	test_and_set_bit(FLG_L1_DEACTTIMER, &l1->Flags);
+}
+
+static void
+l1_power_up_s(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	if (test_bit(FLG_L1_ACTIVATING, &l1->Flags)) {
+		mISDN_FsmChangeState(fi, ST_L1_F4);
+		l1->dcb(l1->dch, INFO3_P8);
+	} else
+		mISDN_FsmChangeState(fi, ST_L1_F3);
+}
+
+static void
+l1_go_F5(struct FsmInst *fi, int event, void *arg)
+{
+	mISDN_FsmChangeState(fi, ST_L1_F5);
+}
+
+static void
+l1_go_F8(struct FsmInst *fi, int event, void *arg)
+{
+	mISDN_FsmChangeState(fi, ST_L1_F8);
+}
+
+static void
+l1_info2_ind(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L1_F6);
+	l1->dcb(l1->dch, INFO3_P8);
+}
+
+static void
+l1_info4_ind(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L1_F7);
+	l1->dcb(l1->dch, INFO3_P8);
+	if (test_and_clear_bit(FLG_L1_DEACTTIMER, &l1->Flags))
+		mISDN_FsmDelTimer(&l1->timer, 4);
+	if (!test_bit(FLG_L1_ACTIVATED, &l1->Flags)) {
+		if (test_and_clear_bit(FLG_L1_T3RUN, &l1->Flags))
+			mISDN_FsmDelTimer(&l1->timer, 3);
+		mISDN_FsmRestartTimer(&l1->timer, 110, EV_TIMER_ACT, NULL, 2);
+		test_and_set_bit(FLG_L1_ACTTIMER, &l1->Flags);
+	}
+}
+
+static void
+l1_timer3(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	test_and_clear_bit(FLG_L1_T3RUN, &l1->Flags);
+	if (test_and_clear_bit(FLG_L1_ACTIVATING, &l1->Flags)) {
+		if (test_and_clear_bit(FLG_L1_DBLOCKED, &l1->Flags))
+			l1->dcb(l1->dch, HW_D_NOBLOCKED);
+		l1->dcb(l1->dch, PH_DEACTIVATE_IND);
+	}
+	if (l1->l1m.state != ST_L1_F6) {
+		mISDN_FsmChangeState(fi, ST_L1_F3);
+		l1->dcb(l1->dch, HW_POWERUP_REQ);
+	}
+}
+
+static void
+l1_timer_act(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	test_and_clear_bit(FLG_L1_ACTTIMER, &l1->Flags);
+	test_and_set_bit(FLG_L1_ACTIVATED, &l1->Flags);
+	l1->dcb(l1->dch, PH_ACTIVATE_IND);
+}
+
+static void
+l1_timer_deact(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	test_and_clear_bit(FLG_L1_DEACTTIMER, &l1->Flags);
+	test_and_clear_bit(FLG_L1_ACTIVATED, &l1->Flags);
+	if (test_and_clear_bit(FLG_L1_DBLOCKED, &l1->Flags))
+		l1->dcb(l1->dch, HW_D_NOBLOCKED);
+	l1->dcb(l1->dch, PH_DEACTIVATE_IND);
+	l1->dcb(l1->dch, HW_DEACT_REQ);
+}
+
+static void
+l1_activate_s(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	mISDN_FsmRestartTimer(&l1->timer, TIMER3_VALUE, EV_TIMER3, NULL, 2);
+	test_and_set_bit(FLG_L1_T3RUN, &l1->Flags);
+	l1->dcb(l1->dch, HW_RESET_REQ);
+}
+
+static void
+l1_activate_no(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer1 *l1 = fi->userdata;
+
+	if ((!test_bit(FLG_L1_DEACTTIMER, &l1->Flags)) &&
+	    (!test_bit(FLG_L1_T3RUN, &l1->Flags))) {
+		test_and_clear_bit(FLG_L1_ACTIVATING, &l1->Flags);
+		if (test_and_clear_bit(FLG_L1_DBLOCKED, &l1->Flags))
+			l1->dcb(l1->dch, HW_D_NOBLOCKED);
+		l1->dcb(l1->dch, PH_DEACTIVATE_IND);
+	}
+}
+
+static struct FsmNode L1SFnList[] =
+{
+	{ST_L1_F3, EV_PH_ACTIVATE, l1_activate_s},
+	{ST_L1_F6, EV_PH_ACTIVATE, l1_activate_no},
+	{ST_L1_F8, EV_PH_ACTIVATE, l1_activate_no},
+	{ST_L1_F3, EV_RESET_IND, l1_reset},
+	{ST_L1_F4, EV_RESET_IND, l1_reset},
+	{ST_L1_F5, EV_RESET_IND, l1_reset},
+	{ST_L1_F6, EV_RESET_IND, l1_reset},
+	{ST_L1_F7, EV_RESET_IND, l1_reset},
+	{ST_L1_F8, EV_RESET_IND, l1_reset},
+	{ST_L1_F3, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F4, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F5, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F6, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F7, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F8, EV_DEACT_CNF, l1_deact_cnf},
+	{ST_L1_F6, EV_DEACT_IND, l1_deact_req_s},
+	{ST_L1_F7, EV_DEACT_IND, l1_deact_req_s},
+	{ST_L1_F8, EV_DEACT_IND, l1_deact_req_s},
+	{ST_L1_F3, EV_POWER_UP,  l1_power_up_s},
+	{ST_L1_F4, EV_ANYSIG_IND, l1_go_F5},
+	{ST_L1_F6, EV_ANYSIG_IND, l1_go_F8},
+	{ST_L1_F7, EV_ANYSIG_IND, l1_go_F8},
+	{ST_L1_F3, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F4, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F5, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F7, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F8, EV_INFO2_IND, l1_info2_ind},
+	{ST_L1_F3, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F4, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F5, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F6, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F8, EV_INFO4_IND, l1_info4_ind},
+	{ST_L1_F3, EV_TIMER3, l1_timer3},
+	{ST_L1_F4, EV_TIMER3, l1_timer3},
+	{ST_L1_F5, EV_TIMER3, l1_timer3},
+	{ST_L1_F6, EV_TIMER3, l1_timer3},
+	{ST_L1_F8, EV_TIMER3, l1_timer3},
+	{ST_L1_F7, EV_TIMER_ACT, l1_timer_act},
+	{ST_L1_F3, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F4, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F5, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F6, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F7, EV_TIMER_DEACT, l1_timer_deact},
+	{ST_L1_F8, EV_TIMER_DEACT, l1_timer_deact},
+};
+
+static void
+release_l1(struct layer1 *l1) {
+	mISDN_FsmDelTimer(&l1->timer, 0);
+	if (l1->dch)
+		l1->dch->l1 = NULL;
+	module_put(THIS_MODULE);
+	kfree(l1);
+}
+
+int
+l1_event(struct layer1 *l1, u_int event)
+{
+	int		err = 0;
+
+	if (!l1)
+		return -EINVAL;
+	switch (event) {
+	case HW_RESET_IND:
+		mISDN_FsmEvent(&l1->l1m, EV_RESET_IND, NULL);
+		break;
+	case HW_DEACT_IND:
+		mISDN_FsmEvent(&l1->l1m, EV_DEACT_IND, NULL);
+		break;
+	case HW_POWERUP_IND:
+		mISDN_FsmEvent(&l1->l1m, EV_POWER_UP, NULL);
+		break;
+	case HW_DEACT_CNF:
+		mISDN_FsmEvent(&l1->l1m, EV_DEACT_CNF, NULL);
+		break;
+	case ANYSIGNAL:
+		mISDN_FsmEvent(&l1->l1m, EV_ANYSIG_IND, NULL);
+		break;
+	case LOSTFRAMING:
+		mISDN_FsmEvent(&l1->l1m, EV_ANYSIG_IND, NULL);
+		break;
+	case INFO2:
+		mISDN_FsmEvent(&l1->l1m, EV_INFO2_IND, NULL);
+		break;
+	case INFO4_P8:
+		mISDN_FsmEvent(&l1->l1m, EV_INFO4_IND, NULL);
+		break;
+	case INFO4_P10:
+		mISDN_FsmEvent(&l1->l1m, EV_INFO4_IND, NULL);
+		break;
+	case PH_ACTIVATE_REQ:
+		if (test_bit(FLG_L1_ACTIVATED, &l1->Flags))
+			l1->dcb(l1->dch, PH_ACTIVATE_IND);
+		else {
+			test_and_set_bit(FLG_L1_ACTIVATING, &l1->Flags);
+			mISDN_FsmEvent(&l1->l1m, EV_PH_ACTIVATE, NULL);
+		}
+		break;
+	case CLOSE_CHANNEL:
+		release_l1(l1);
+		break;
+	default:
+		if (*debug & DEBUG_L1)
+			printk(KERN_DEBUG "%s %x unhandled\n",
+			    __func__, event);
+		err = -EINVAL;
+	}
+	return err;
+}
+EXPORT_SYMBOL(l1_event);
+
+int
+create_l1(struct dchannel *dch, dchannel_l1callback *dcb) {
+	struct layer1	*nl1;
+
+	nl1 = kzalloc(sizeof(struct layer1), GFP_ATOMIC);
+	if (!nl1) {
+		printk(KERN_ERR "kmalloc struct layer1 failed\n");
+		return -ENOMEM;
+	}
+	nl1->l1m.fsm = &l1fsm_s;
+	nl1->l1m.state = ST_L1_F3;
+	nl1->Flags = 0;
+	nl1->l1m.debug = *debug & DEBUG_L1_FSM;
+	nl1->l1m.userdata = nl1;
+	nl1->l1m.userint = 0;
+	nl1->l1m.printdebug = l1m_debug;
+	nl1->dch = dch;
+	nl1->dcb = dcb;
+	mISDN_FsmInitTimer(&nl1->l1m, &nl1->timer);
+	__module_get(THIS_MODULE);
+	dch->l1 = nl1;
+	return 0;
+}
+EXPORT_SYMBOL(create_l1);
+
+int
+l1_init(u_int *deb)
+{
+	debug = deb;
+	l1fsm_s.state_count = L1S_STATE_COUNT;
+	l1fsm_s.event_count = L1_EVENT_COUNT;
+	l1fsm_s.strEvent = strL1Event;
+	l1fsm_s.strState = strL1SState;
+	mISDN_FsmNew(&l1fsm_s, L1SFnList, ARRAY_SIZE(L1SFnList));
+	return 0;
+}
+
+void
+l1_cleanup(void)
+{
+	mISDN_FsmFree(&l1fsm_s);
+}
diff --git a/drivers/isdn/mISDN/layer1.h b/drivers/isdn/mISDN/layer1.h
new file mode 100644
index 00000000000..9c8125fd89a
--- /dev/null
+++ b/drivers/isdn/mISDN/layer1.h
@@ -0,0 +1,26 @@
+/*
+ *
+ * Layer 1 defines
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define FLG_L1_ACTIVATING	1
+#define FLG_L1_ACTIVATED	2
+#define FLG_L1_DEACTTIMER	3
+#define FLG_L1_ACTTIMER		4
+#define FLG_L1_T3RUN		5
+#define FLG_L1_PULL_REQ		6
+#define FLG_L1_UINT		7
+#define FLG_L1_DBLOCKED		8
+
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
new file mode 100644
index 00000000000..f5ad888ee71
--- /dev/null
+++ b/drivers/isdn/mISDN/layer2.c
@@ -0,0 +1,2216 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "fsm.h"
+#include "layer2.h"
+
+static int *debug;
+
+static
+struct Fsm l2fsm = {NULL, 0, 0, NULL, NULL};
+
+static char *strL2State[] =
+{
+	"ST_L2_1",
+	"ST_L2_2",
+	"ST_L2_3",
+	"ST_L2_4",
+	"ST_L2_5",
+	"ST_L2_6",
+	"ST_L2_7",
+	"ST_L2_8",
+};
+
+enum {
+	EV_L2_UI,
+	EV_L2_SABME,
+	EV_L2_DISC,
+	EV_L2_DM,
+	EV_L2_UA,
+	EV_L2_FRMR,
+	EV_L2_SUPER,
+	EV_L2_I,
+	EV_L2_DL_DATA,
+	EV_L2_ACK_PULL,
+	EV_L2_DL_UNITDATA,
+	EV_L2_DL_ESTABLISH_REQ,
+	EV_L2_DL_RELEASE_REQ,
+	EV_L2_MDL_ASSIGN,
+	EV_L2_MDL_REMOVE,
+	EV_L2_MDL_ERROR,
+	EV_L1_DEACTIVATE,
+	EV_L2_T200,
+	EV_L2_T203,
+	EV_L2_SET_OWN_BUSY,
+	EV_L2_CLEAR_OWN_BUSY,
+	EV_L2_FRAME_ERROR,
+};
+
+#define L2_EVENT_COUNT (EV_L2_FRAME_ERROR+1)
+
+static char *strL2Event[] =
+{
+	"EV_L2_UI",
+	"EV_L2_SABME",
+	"EV_L2_DISC",
+	"EV_L2_DM",
+	"EV_L2_UA",
+	"EV_L2_FRMR",
+	"EV_L2_SUPER",
+	"EV_L2_I",
+	"EV_L2_DL_DATA",
+	"EV_L2_ACK_PULL",
+	"EV_L2_DL_UNITDATA",
+	"EV_L2_DL_ESTABLISH_REQ",
+	"EV_L2_DL_RELEASE_REQ",
+	"EV_L2_MDL_ASSIGN",
+	"EV_L2_MDL_REMOVE",
+	"EV_L2_MDL_ERROR",
+	"EV_L1_DEACTIVATE",
+	"EV_L2_T200",
+	"EV_L2_T203",
+	"EV_L2_SET_OWN_BUSY",
+	"EV_L2_CLEAR_OWN_BUSY",
+	"EV_L2_FRAME_ERROR",
+};
+
+static void
+l2m_debug(struct FsmInst *fi, char *fmt, ...)
+{
+	struct layer2 *l2 = fi->userdata;
+	va_list va;
+
+	if (!(*debug & DEBUG_L2_FSM))
+		return;
+	va_start(va, fmt);
+	printk(KERN_DEBUG "l2 (tei %d): ", l2->tei);
+	vprintk(fmt, va);
+	printk("\n");
+	va_end(va);
+}
+
+inline u_int
+l2headersize(struct layer2 *l2, int ui)
+{
+	return ((test_bit(FLG_MOD128, &l2->flag) && (!ui)) ? 2 : 1) +
+		(test_bit(FLG_LAPD, &l2->flag) ? 2 : 1);
+}
+
+inline u_int
+l2addrsize(struct layer2 *l2)
+{
+	return test_bit(FLG_LAPD, &l2->flag) ? 2 : 1;
+}
+
+static u_int
+l2_newid(struct layer2 *l2)
+{
+	u_int	id;
+
+	id = l2->next_id++;
+	if (id == 0x7fff)
+		l2->next_id = 1;
+	id <<= 16;
+	id |= l2->tei << 8;
+	id |= l2->sapi;
+	return id;
+}
+
+static void
+l2up(struct layer2 *l2, u_int prim, struct sk_buff *skb)
+{
+	int	err;
+
+	if (!l2->up)
+		return;
+	mISDN_HEAD_PRIM(skb) = prim;
+	mISDN_HEAD_ID(skb) = (l2->ch.nr << 16) | l2->ch.addr;
+	err = l2->up->send(l2->up, skb);
+	if (err) {
+		printk(KERN_WARNING "%s: err=%d\n", __func__, err);
+		dev_kfree_skb(skb);
+	}
+}
+
+static void
+l2up_create(struct layer2 *l2, u_int prim, int len, void *arg)
+{
+	struct sk_buff	*skb;
+	struct mISDNhead *hh;
+	int		err;
+
+	if (!l2->up)
+		return;
+	skb = mI_alloc_skb(len, GFP_ATOMIC);
+	if (!skb)
+		return;
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = (l2->ch.nr << 16) | l2->ch.addr;
+	if (len)
+		memcpy(skb_put(skb, len), arg, len);
+	err = l2->up->send(l2->up, skb);
+	if (err) {
+		printk(KERN_WARNING "%s: err=%d\n", __func__, err);
+		dev_kfree_skb(skb);
+	}
+}
+
+static int
+l2down_skb(struct layer2 *l2, struct sk_buff *skb) {
+	int ret;
+
+	ret = l2->ch.recv(l2->ch.peer, skb);
+	if (ret && (*debug & DEBUG_L2_RECV))
+		printk(KERN_DEBUG "l2down_skb: ret(%d)\n", ret);
+	return ret;
+}
+
+static int
+l2down_raw(struct layer2 *l2, struct sk_buff *skb)
+{
+	struct mISDNhead *hh = mISDN_HEAD_P(skb);
+
+	if (hh->prim == PH_DATA_REQ) {
+		if (test_and_set_bit(FLG_L1_NOTREADY, &l2->flag)) {
+			skb_queue_tail(&l2->down_queue, skb);
+			return 0;
+		}
+		l2->down_id = mISDN_HEAD_ID(skb);
+	}
+	return l2down_skb(l2, skb);
+}
+
+static int
+l2down(struct layer2 *l2, u_int prim, u_int id, struct sk_buff *skb)
+{
+	struct mISDNhead *hh = mISDN_HEAD_P(skb);
+
+	hh->prim = prim;
+	hh->id = id;
+	return l2down_raw(l2, skb);
+}
+
+static int
+l2down_create(struct layer2 *l2, u_int prim, u_int id, int len, void *arg)
+{
+	struct sk_buff	*skb;
+	int		err;
+	struct mISDNhead *hh;
+
+	skb = mI_alloc_skb(len, GFP_ATOMIC);
+	if (!skb)
+		return -ENOMEM;
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = id;
+	if (len)
+		memcpy(skb_put(skb, len), arg, len);
+	err = l2down_raw(l2, skb);
+	if (err)
+		dev_kfree_skb(skb);
+	return err;
+}
+
+static int
+ph_data_confirm(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb) {
+	struct sk_buff *nskb = skb;
+	int ret = -EAGAIN;
+
+	if (test_bit(FLG_L1_NOTREADY, &l2->flag)) {
+		if (hh->id == l2->down_id) {
+			nskb = skb_dequeue(&l2->down_queue);
+			if (nskb) {
+				l2->down_id = mISDN_HEAD_ID(nskb);
+				if (l2down_skb(l2, nskb)) {
+					dev_kfree_skb(nskb);
+					l2->down_id = MISDN_ID_NONE;
+				}
+			} else
+				l2->down_id = MISDN_ID_NONE;
+			if (ret) {
+				dev_kfree_skb(skb);
+				ret = 0;
+			}
+			if (l2->down_id == MISDN_ID_NONE) {
+				test_and_clear_bit(FLG_L1_NOTREADY, &l2->flag);
+				mISDN_FsmEvent(&l2->l2m, EV_L2_ACK_PULL, NULL);
+			}
+		}
+	}
+	if (!test_and_set_bit(FLG_L1_NOTREADY, &l2->flag)) {
+		nskb = skb_dequeue(&l2->down_queue);
+		if (nskb) {
+			l2->down_id = mISDN_HEAD_ID(nskb);
+			if (l2down_skb(l2, nskb)) {
+				dev_kfree_skb(nskb);
+				l2->down_id = MISDN_ID_NONE;
+				test_and_clear_bit(FLG_L1_NOTREADY, &l2->flag);
+			}
+		} else
+			test_and_clear_bit(FLG_L1_NOTREADY, &l2->flag);
+	}
+	return ret;
+}
+
+static int
+l2mgr(struct layer2 *l2, u_int prim, void *arg) {
+	long c = (long)arg;
+
+	printk(KERN_WARNING
+	    "l2mgr: addr:%x prim %x %c\n", l2->id, prim, (char)c);
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		!test_bit(FLG_FIXED_TEI, &l2->flag)) {
+		switch (c) {
+		case 'C':
+		case 'D':
+		case 'G':
+		case 'H':
+			l2_tei(l2, prim, (u_long)arg);
+			break;
+		}
+	}
+	return 0;
+}
+
+static void
+set_peer_busy(struct layer2 *l2) {
+	test_and_set_bit(FLG_PEER_BUSY, &l2->flag);
+	if (skb_queue_len(&l2->i_queue) || skb_queue_len(&l2->ui_queue))
+		test_and_set_bit(FLG_L2BLOCK, &l2->flag);
+}
+
+static void
+clear_peer_busy(struct layer2 *l2) {
+	if (test_and_clear_bit(FLG_PEER_BUSY, &l2->flag))
+		test_and_clear_bit(FLG_L2BLOCK, &l2->flag);
+}
+
+static void
+InitWin(struct layer2 *l2)
+{
+	int i;
+
+	for (i = 0; i < MAX_WINDOW; i++)
+		l2->windowar[i] = NULL;
+}
+
+static int
+freewin(struct layer2 *l2)
+{
+	int i, cnt = 0;
+
+	for (i = 0; i < MAX_WINDOW; i++) {
+		if (l2->windowar[i]) {
+			cnt++;
+			dev_kfree_skb(l2->windowar[i]);
+			l2->windowar[i] = NULL;
+		}
+	}
+	return cnt;
+}
+
+static void
+ReleaseWin(struct layer2 *l2)
+{
+	int cnt = freewin(l2);
+
+	if (cnt)
+		printk(KERN_WARNING
+		    "isdnl2 freed %d skbuffs in release\n", cnt);
+}
+
+inline unsigned int
+cansend(struct layer2 *l2)
+{
+	unsigned int p1;
+
+	if (test_bit(FLG_MOD128, &l2->flag))
+		p1 = (l2->vs - l2->va) % 128;
+	else
+		p1 = (l2->vs - l2->va) % 8;
+	return (p1 < l2->window) && !test_bit(FLG_PEER_BUSY, &l2->flag);
+}
+
+inline void
+clear_exception(struct layer2 *l2)
+{
+	test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	test_and_clear_bit(FLG_REJEXC, &l2->flag);
+	test_and_clear_bit(FLG_OWN_BUSY, &l2->flag);
+	clear_peer_busy(l2);
+}
+
+static int
+sethdraddr(struct layer2 *l2, u_char *header, int rsp)
+{
+	u_char *ptr = header;
+	int crbit = rsp;
+
+	if (test_bit(FLG_LAPD, &l2->flag)) {
+		if (test_bit(FLG_LAPD_NET, &l2->flag))
+			crbit = !crbit;
+		*ptr++ = (l2->sapi << 2) | (crbit ? 2 : 0);
+		*ptr++ = (l2->tei << 1) | 1;
+		return 2;
+	} else {
+		if (test_bit(FLG_ORIG, &l2->flag))
+			crbit = !crbit;
+		if (crbit)
+			*ptr++ = l2->addr.B;
+		else
+			*ptr++ = l2->addr.A;
+		return 1;
+	}
+}
+
+static inline void
+enqueue_super(struct layer2 *l2, struct sk_buff *skb)
+{
+	if (l2down(l2, PH_DATA_REQ, l2_newid(l2), skb))
+		dev_kfree_skb(skb);
+}
+
+static inline void
+enqueue_ui(struct layer2 *l2, struct sk_buff *skb)
+{
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_UI_IND, 0);
+	if (l2down(l2, PH_DATA_REQ, l2_newid(l2), skb))
+		dev_kfree_skb(skb);
+}
+
+inline int
+IsUI(u_char *data)
+{
+	return (data[0] & 0xef) == UI;
+}
+
+inline int
+IsUA(u_char *data)
+{
+	return (data[0] & 0xef) == UA;
+}
+
+inline int
+IsDM(u_char *data)
+{
+	return (data[0] & 0xef) == DM;
+}
+
+inline int
+IsDISC(u_char *data)
+{
+	return (data[0] & 0xef) == DISC;
+}
+
+inline int
+IsRR(u_char *data, struct layer2 *l2)
+{
+	if (test_bit(FLG_MOD128, &l2->flag))
+		return data[0] == RR;
+	else
+		return (data[0] & 0xf) == 1;
+}
+
+inline int
+IsSFrame(u_char *data, struct layer2 *l2)
+{
+	register u_char d = *data;
+
+	if (!test_bit(FLG_MOD128, &l2->flag))
+		d &= 0xf;
+	return ((d & 0xf3) == 1) && ((d & 0x0c) != 0x0c);
+}
+
+inline int
+IsSABME(u_char *data, struct layer2 *l2)
+{
+	u_char d = data[0] & ~0x10;
+
+	return test_bit(FLG_MOD128, &l2->flag) ? d == SABME : d == SABM;
+}
+
+inline int
+IsREJ(u_char *data, struct layer2 *l2)
+{
+	return test_bit(FLG_MOD128, &l2->flag) ?
+		data[0] == REJ : (data[0] & 0xf) == REJ;
+}
+
+inline int
+IsFRMR(u_char *data)
+{
+	return (data[0] & 0xef) == FRMR;
+}
+
+inline int
+IsRNR(u_char *data, struct layer2 *l2)
+{
+	return test_bit(FLG_MOD128, &l2->flag) ?
+	    data[0] == RNR : (data[0] & 0xf) == RNR;
+}
+
+int
+iframe_error(struct layer2 *l2, struct sk_buff *skb)
+{
+	u_int	i;
+	int	rsp = *skb->data & 0x2;
+
+	i = l2addrsize(l2) + (test_bit(FLG_MOD128, &l2->flag) ? 2 : 1);
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+	if (rsp)
+		return 'L';
+	if (skb->len < i)
+		return 'N';
+	if ((skb->len - i) > l2->maxlen)
+		return 'O';
+	return 0;
+}
+
+int
+super_error(struct layer2 *l2, struct sk_buff *skb)
+{
+	if (skb->len != l2addrsize(l2) +
+	    (test_bit(FLG_MOD128, &l2->flag) ? 2 : 1))
+		return 'N';
+	return 0;
+}
+
+int
+unnum_error(struct layer2 *l2, struct sk_buff *skb, int wantrsp)
+{
+	int rsp = (*skb->data & 0x2) >> 1;
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+	if (rsp != wantrsp)
+		return 'L';
+	if (skb->len != l2addrsize(l2) + 1)
+		return 'N';
+	return 0;
+}
+
+int
+UI_error(struct layer2 *l2, struct sk_buff *skb)
+{
+	int rsp = *skb->data & 0x2;
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+	if (rsp)
+		return 'L';
+	if (skb->len > l2->maxlen + l2addrsize(l2) + 1)
+		return 'O';
+	return 0;
+}
+
+int
+FRMR_error(struct layer2 *l2, struct sk_buff *skb)
+{
+	u_int	headers = l2addrsize(l2) + 1;
+	u_char	*datap = skb->data + headers;
+	int	rsp = *skb->data & 0x2;
+
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+	if (!rsp)
+		return 'L';
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		if (skb->len < headers + 5)
+			return 'N';
+		else if (*debug & DEBUG_L2)
+			l2m_debug(&l2->l2m,
+			    "FRMR information %2x %2x %2x %2x %2x",
+			    datap[0], datap[1], datap[2], datap[3], datap[4]);
+	} else {
+		if (skb->len < headers + 3)
+			return 'N';
+		else if (*debug & DEBUG_L2)
+			l2m_debug(&l2->l2m,
+			    "FRMR information %2x %2x %2x",
+			    datap[0], datap[1], datap[2]);
+	}
+	return 0;
+}
+
+static unsigned int
+legalnr(struct layer2 *l2, unsigned int nr)
+{
+	if (test_bit(FLG_MOD128, &l2->flag))
+		return ((nr - l2->va) % 128) <= ((l2->vs - l2->va) % 128);
+	else
+		return ((nr - l2->va) % 8) <= ((l2->vs - l2->va) % 8);
+}
+
+static void
+setva(struct layer2 *l2, unsigned int nr)
+{
+	struct sk_buff	*skb;
+
+	while (l2->va != nr) {
+		l2->va++;
+		if (test_bit(FLG_MOD128, &l2->flag))
+			l2->va %= 128;
+		else
+			l2->va %= 8;
+		if (l2->windowar[l2->sow]) {
+			skb_trim(l2->windowar[l2->sow], 0);
+			skb_queue_tail(&l2->tmp_queue, l2->windowar[l2->sow]);
+			l2->windowar[l2->sow] = NULL;
+		}
+		l2->sow = (l2->sow + 1) % l2->window;
+	}
+	skb = skb_dequeue(&l2->tmp_queue);
+	while (skb) {
+		dev_kfree_skb(skb);
+		skb = skb_dequeue(&l2->tmp_queue);
+	}
+}
+
+static void
+send_uframe(struct layer2 *l2, struct sk_buff *skb, u_char cmd, u_char cr)
+{
+	u_char tmp[MAX_L2HEADER_LEN];
+	int i;
+
+	i = sethdraddr(l2, tmp, cr);
+	tmp[i++] = cmd;
+	if (skb)
+		skb_trim(skb, 0);
+	else {
+		skb = mI_alloc_skb(i, GFP_ATOMIC);
+		if (!skb) {
+			printk(KERN_WARNING "%s: can't alloc skbuff\n",
+				__func__);
+			return;
+		}
+	}
+	memcpy(skb_put(skb, i), tmp, i);
+	enqueue_super(l2, skb);
+}
+
+
+inline u_char
+get_PollFlag(struct layer2 *l2, struct sk_buff *skb)
+{
+	return skb->data[l2addrsize(l2)] & 0x10;
+}
+
+inline u_char
+get_PollFlagFree(struct layer2 *l2, struct sk_buff *skb)
+{
+	u_char PF;
+
+	PF = get_PollFlag(l2, skb);
+	dev_kfree_skb(skb);
+	return PF;
+}
+
+inline void
+start_t200(struct layer2 *l2, int i)
+{
+	mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, i);
+	test_and_set_bit(FLG_T200_RUN, &l2->flag);
+}
+
+inline void
+restart_t200(struct layer2 *l2, int i)
+{
+	mISDN_FsmRestartTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, i);
+	test_and_set_bit(FLG_T200_RUN, &l2->flag);
+}
+
+inline void
+stop_t200(struct layer2 *l2, int i)
+{
+	if (test_and_clear_bit(FLG_T200_RUN, &l2->flag))
+		mISDN_FsmDelTimer(&l2->t200, i);
+}
+
+inline void
+st5_dl_release_l2l3(struct layer2 *l2)
+{
+	int pr;
+
+	if (test_and_clear_bit(FLG_PEND_REL, &l2->flag))
+		pr = DL_RELEASE_CNF;
+	else
+		pr = DL_RELEASE_IND;
+	l2up_create(l2, pr, 0, NULL);
+}
+
+inline void
+lapb_dl_release_l2l3(struct layer2 *l2, int f)
+{
+	if (test_bit(FLG_LAPB, &l2->flag))
+		l2down_create(l2, PH_DEACTIVATE_REQ, l2_newid(l2), 0, NULL);
+	l2up_create(l2, f, 0, NULL);
+}
+
+static void
+establishlink(struct FsmInst *fi)
+{
+	struct layer2 *l2 = fi->userdata;
+	u_char cmd;
+
+	clear_exception(l2);
+	l2->rc = 0;
+	cmd = (test_bit(FLG_MOD128, &l2->flag) ? SABME : SABM) | 0x10;
+	send_uframe(l2, NULL, cmd, CMD);
+	mISDN_FsmDelTimer(&l2->t203, 1);
+	restart_t200(l2, 1);
+	test_and_clear_bit(FLG_PEND_REL, &l2->flag);
+	freewin(l2);
+	mISDN_FsmChangeState(fi, ST_L2_5);
+}
+
+static void
+l2_mdl_error_ua(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	if (get_PollFlagFree(l2, skb))
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'C');
+	else
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'D');
+
+}
+
+static void
+l2_mdl_error_dm(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	if (get_PollFlagFree(l2, skb))
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'B');
+	else {
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'E');
+		establishlink(fi);
+		test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+	}
+}
+
+static void
+l2_st8_mdl_error_dm(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	if (get_PollFlagFree(l2, skb))
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'B');
+	else
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'E');
+	establishlink(fi);
+	test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+}
+
+static void
+l2_go_st3(struct FsmInst *fi, int event, void *arg)
+{
+	dev_kfree_skb((struct sk_buff *)arg);
+	mISDN_FsmChangeState(fi, ST_L2_3);
+}
+
+static void
+l2_mdl_assign(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+
+	mISDN_FsmChangeState(fi, ST_L2_3);
+	dev_kfree_skb((struct sk_buff *)arg);
+	l2_tei(l2, MDL_ASSIGN_IND, 0);
+}
+
+static void
+l2_queue_ui_assign(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->ui_queue, skb);
+	mISDN_FsmChangeState(fi, ST_L2_2);
+	l2_tei(l2, MDL_ASSIGN_IND, 0);
+}
+
+static void
+l2_queue_ui(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->ui_queue, skb);
+}
+
+static void
+tx_ui(struct layer2 *l2)
+{
+	struct sk_buff *skb;
+	u_char header[MAX_L2HEADER_LEN];
+	int i;
+
+	i = sethdraddr(l2, header, CMD);
+	if (test_bit(FLG_LAPD_NET, &l2->flag))
+		header[1] = 0xff; /* tei 127 */
+	header[i++] = UI;
+	while ((skb = skb_dequeue(&l2->ui_queue))) {
+		memcpy(skb_push(skb, i), header, i);
+		enqueue_ui(l2, skb);
+	}
+}
+
+static void
+l2_send_ui(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->ui_queue, skb);
+	tx_ui(l2);
+}
+
+static void
+l2_got_ui(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_pull(skb, l2headersize(l2, 1));
+/*
+ *		in states 1-3 for broadcast
+ */
+
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_UI_IND, 0);
+	l2up(l2, DL_UNITDATA_IND, skb);
+}
+
+static void
+l2_establish(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	establishlink(fi);
+	test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_discard_i_setl3(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->i_queue);
+	test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	test_and_clear_bit(FLG_PEND_REL, &l2->flag);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_l3_reestablish(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->i_queue);
+	establishlink(fi);
+	test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_release(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_trim(skb, 0);
+	l2up(l2, DL_RELEASE_CNF, skb);
+}
+
+static void
+l2_pend_rel(struct FsmInst *fi, int event, void *arg)
+{
+	struct sk_buff *skb = arg;
+	struct layer2 *l2 = fi->userdata;
+
+	test_and_set_bit(FLG_PEND_REL, &l2->flag);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_disconnect(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->i_queue);
+	freewin(l2);
+	mISDN_FsmChangeState(fi, ST_L2_6);
+	l2->rc = 0;
+	send_uframe(l2, NULL, DISC | 0x10, CMD);
+	mISDN_FsmDelTimer(&l2->t203, 1);
+	restart_t200(l2, 2);
+	if (skb)
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_start_multi(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+
+	l2->vs = 0;
+	l2->va = 0;
+	l2->vr = 0;
+	l2->sow = 0;
+	clear_exception(l2);
+	send_uframe(l2, NULL, UA | get_PollFlag(l2, skb), RSP);
+	mISDN_FsmChangeState(fi, ST_L2_7);
+	mISDN_FsmAddTimer(&l2->t203, l2->T203, EV_L2_T203, NULL, 3);
+	skb_trim(skb, 0);
+	l2up(l2, DL_ESTABLISH_IND, skb);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_UP_IND, 0);
+}
+
+static void
+l2_send_UA(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	send_uframe(l2, skb, UA | get_PollFlag(l2, skb), RSP);
+}
+
+static void
+l2_send_DM(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	send_uframe(l2, skb, DM | get_PollFlag(l2, skb), RSP);
+}
+
+static void
+l2_restart_multi(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+	int		est = 0;
+
+	send_uframe(l2, skb, UA | get_PollFlag(l2, skb), RSP);
+
+	l2mgr(l2, MDL_ERROR_IND, (void *) 'F');
+
+	if (l2->vs != l2->va) {
+		skb_queue_purge(&l2->i_queue);
+		est = 1;
+	}
+
+	clear_exception(l2);
+	l2->vs = 0;
+	l2->va = 0;
+	l2->vr = 0;
+	l2->sow = 0;
+	mISDN_FsmChangeState(fi, ST_L2_7);
+	stop_t200(l2, 3);
+	mISDN_FsmRestartTimer(&l2->t203, l2->T203, EV_L2_T203, NULL, 3);
+
+	if (est)
+		l2up_create(l2, DL_ESTABLISH_IND, 0, NULL);
+/*		mISDN_queue_data(&l2->inst, l2->inst.id | MSG_BROADCAST,
+ *		    MGR_SHORTSTATUS | INDICATION, SSTATUS_L2_ESTABLISHED,
+ *		    0, NULL, 0);
+ */
+	if (skb_queue_len(&l2->i_queue) && cansend(l2))
+		mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+}
+
+static void
+l2_stop_multi(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	mISDN_FsmDelTimer(&l2->t203, 3);
+	stop_t200(l2, 4);
+
+	send_uframe(l2, skb, UA | get_PollFlag(l2, skb), RSP);
+	skb_queue_purge(&l2->i_queue);
+	freewin(l2);
+	lapb_dl_release_l2l3(l2, DL_RELEASE_IND);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+}
+
+static void
+l2_connected(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+	int pr = -1;
+
+	if (!get_PollFlag(l2, skb)) {
+		l2_mdl_error_ua(fi, event, arg);
+		return;
+	}
+	dev_kfree_skb(skb);
+	if (test_and_clear_bit(FLG_PEND_REL, &l2->flag))
+		l2_disconnect(fi, event, NULL);
+	if (test_and_clear_bit(FLG_L3_INIT, &l2->flag)) {
+		pr = DL_ESTABLISH_CNF;
+	} else if (l2->vs != l2->va) {
+		skb_queue_purge(&l2->i_queue);
+		pr = DL_ESTABLISH_IND;
+	}
+	stop_t200(l2, 5);
+	l2->vr = 0;
+	l2->vs = 0;
+	l2->va = 0;
+	l2->sow = 0;
+	mISDN_FsmChangeState(fi, ST_L2_7);
+	mISDN_FsmAddTimer(&l2->t203, l2->T203, EV_L2_T203, NULL, 4);
+	if (pr != -1)
+		l2up_create(l2, pr, 0, NULL);
+
+	if (skb_queue_len(&l2->i_queue) && cansend(l2))
+		mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_UP_IND, 0);
+}
+
+static void
+l2_released(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!get_PollFlag(l2, skb)) {
+		l2_mdl_error_ua(fi, event, arg);
+		return;
+	}
+	dev_kfree_skb(skb);
+	stop_t200(l2, 6);
+	lapb_dl_release_l2l3(l2, DL_RELEASE_CNF);
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+}
+
+static void
+l2_reestablish(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!get_PollFlagFree(l2, skb)) {
+		establishlink(fi);
+		test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	}
+}
+
+static void
+l2_st5_dm_release(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (get_PollFlagFree(l2, skb)) {
+		stop_t200(l2, 7);
+		if (!test_bit(FLG_L3_INIT, &l2->flag))
+			skb_queue_purge(&l2->i_queue);
+		if (test_bit(FLG_LAPB, &l2->flag))
+			l2down_create(l2, PH_DEACTIVATE_REQ,
+				l2_newid(l2), 0, NULL);
+		st5_dl_release_l2l3(l2);
+		mISDN_FsmChangeState(fi, ST_L2_4);
+		if (l2->tm)
+			l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	}
+}
+
+static void
+l2_st6_dm_release(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (get_PollFlagFree(l2, skb)) {
+		stop_t200(l2, 8);
+		lapb_dl_release_l2l3(l2, DL_RELEASE_CNF);
+		mISDN_FsmChangeState(fi, ST_L2_4);
+		if (l2->tm)
+			l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	}
+}
+
+void
+enquiry_cr(struct layer2 *l2, u_char typ, u_char cr, u_char pf)
+{
+	struct sk_buff *skb;
+	u_char tmp[MAX_L2HEADER_LEN];
+	int i;
+
+	i = sethdraddr(l2, tmp, cr);
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		tmp[i++] = typ;
+		tmp[i++] = (l2->vr << 1) | (pf ? 1 : 0);
+	} else
+		tmp[i++] = (l2->vr << 5) | typ | (pf ? 0x10 : 0);
+	skb = mI_alloc_skb(i, GFP_ATOMIC);
+	if (!skb) {
+		printk(KERN_WARNING
+		    "isdnl2 can't alloc sbbuff for enquiry_cr\n");
+		return;
+	}
+	memcpy(skb_put(skb, i), tmp, i);
+	enqueue_super(l2, skb);
+}
+
+inline void
+enquiry_response(struct layer2 *l2)
+{
+	if (test_bit(FLG_OWN_BUSY, &l2->flag))
+		enquiry_cr(l2, RNR, RSP, 1);
+	else
+		enquiry_cr(l2, RR, RSP, 1);
+	test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+}
+
+inline void
+transmit_enquiry(struct layer2 *l2)
+{
+	if (test_bit(FLG_OWN_BUSY, &l2->flag))
+		enquiry_cr(l2, RNR, CMD, 1);
+	else
+		enquiry_cr(l2, RR, CMD, 1);
+	test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	start_t200(l2, 9);
+}
+
+
+static void
+nrerrorrecovery(struct FsmInst *fi)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	l2mgr(l2, MDL_ERROR_IND, (void *) 'J');
+	establishlink(fi);
+	test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+}
+
+static void
+invoke_retransmission(struct layer2 *l2, unsigned int nr)
+{
+	u_int	p1;
+
+	if (l2->vs != nr) {
+		while (l2->vs != nr) {
+			(l2->vs)--;
+			if (test_bit(FLG_MOD128, &l2->flag)) {
+				l2->vs %= 128;
+				p1 = (l2->vs - l2->va) % 128;
+			} else {
+				l2->vs %= 8;
+				p1 = (l2->vs - l2->va) % 8;
+			}
+			p1 = (p1 + l2->sow) % l2->window;
+			if (l2->windowar[p1])
+				skb_queue_head(&l2->i_queue, l2->windowar[p1]);
+			else
+				printk(KERN_WARNING
+				    "%s: windowar[%d] is NULL\n",
+				    __func__, p1);
+			l2->windowar[p1] = NULL;
+		}
+		mISDN_FsmEvent(&l2->l2m, EV_L2_ACK_PULL, NULL);
+	}
+}
+
+static void
+l2_st7_got_super(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+	int PollFlag, rsp, typ = RR;
+	unsigned int nr;
+
+	rsp = *skb->data & 0x2;
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+
+	skb_pull(skb, l2addrsize(l2));
+	if (IsRNR(skb->data, l2)) {
+		set_peer_busy(l2);
+		typ = RNR;
+	} else
+		clear_peer_busy(l2);
+	if (IsREJ(skb->data, l2))
+		typ = REJ;
+
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		PollFlag = (skb->data[1] & 0x1) == 0x1;
+		nr = skb->data[1] >> 1;
+	} else {
+		PollFlag = (skb->data[0] & 0x10);
+		nr = (skb->data[0] >> 5) & 0x7;
+	}
+	dev_kfree_skb(skb);
+
+	if (PollFlag) {
+		if (rsp)
+			l2mgr(l2, MDL_ERROR_IND, (void *) 'A');
+		else
+			enquiry_response(l2);
+	}
+	if (legalnr(l2, nr)) {
+		if (typ == REJ) {
+			setva(l2, nr);
+			invoke_retransmission(l2, nr);
+			stop_t200(l2, 10);
+			if (mISDN_FsmAddTimer(&l2->t203, l2->T203,
+					EV_L2_T203, NULL, 6))
+				l2m_debug(&l2->l2m, "Restart T203 ST7 REJ");
+		} else if ((nr == l2->vs) && (typ == RR)) {
+			setva(l2, nr);
+			stop_t200(l2, 11);
+			mISDN_FsmRestartTimer(&l2->t203, l2->T203,
+					EV_L2_T203, NULL, 7);
+		} else if ((l2->va != nr) || (typ == RNR)) {
+			setva(l2, nr);
+			if (typ != RR)
+				mISDN_FsmDelTimer(&l2->t203, 9);
+			restart_t200(l2, 12);
+		}
+		if (skb_queue_len(&l2->i_queue) && (typ == RR))
+			mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+	} else
+		nrerrorrecovery(fi);
+}
+
+static void
+l2_feed_i_if_reest(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!test_bit(FLG_L3_INIT, &l2->flag))
+		skb_queue_tail(&l2->i_queue, skb);
+	else
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_feed_i_pull(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->i_queue, skb);
+	mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+}
+
+static void
+l2_feed_iqueue(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_tail(&l2->i_queue, skb);
+}
+
+static void
+l2_got_iframe(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb = arg;
+	int		PollFlag, i;
+	u_int		ns, nr;
+
+	i = l2addrsize(l2);
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		PollFlag = ((skb->data[i + 1] & 0x1) == 0x1);
+		ns = skb->data[i] >> 1;
+		nr = (skb->data[i + 1] >> 1) & 0x7f;
+	} else {
+		PollFlag = (skb->data[i] & 0x10);
+		ns = (skb->data[i] >> 1) & 0x7;
+		nr = (skb->data[i] >> 5) & 0x7;
+	}
+	if (test_bit(FLG_OWN_BUSY, &l2->flag)) {
+		dev_kfree_skb(skb);
+		if (PollFlag)
+			enquiry_response(l2);
+	} else {
+		if (l2->vr == ns) {
+			l2->vr++;
+			if (test_bit(FLG_MOD128, &l2->flag))
+				l2->vr %= 128;
+			else
+				l2->vr %= 8;
+			test_and_clear_bit(FLG_REJEXC, &l2->flag);
+			if (PollFlag)
+				enquiry_response(l2);
+			else
+				test_and_set_bit(FLG_ACK_PEND, &l2->flag);
+			skb_pull(skb, l2headersize(l2, 0));
+			l2up(l2, DL_DATA_IND, skb);
+		} else {
+			/* n(s)!=v(r) */
+			dev_kfree_skb(skb);
+			if (test_and_set_bit(FLG_REJEXC, &l2->flag)) {
+				if (PollFlag)
+					enquiry_response(l2);
+			} else {
+				enquiry_cr(l2, REJ, RSP, PollFlag);
+				test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+			}
+		}
+	}
+	if (legalnr(l2, nr)) {
+		if (!test_bit(FLG_PEER_BUSY, &l2->flag) &&
+		    (fi->state == ST_L2_7)) {
+			if (nr == l2->vs) {
+				stop_t200(l2, 13);
+				mISDN_FsmRestartTimer(&l2->t203, l2->T203,
+						EV_L2_T203, NULL, 7);
+			} else if (nr != l2->va)
+				restart_t200(l2, 14);
+		}
+		setva(l2, nr);
+	} else {
+		nrerrorrecovery(fi);
+		return;
+	}
+	if (skb_queue_len(&l2->i_queue) && (fi->state == ST_L2_7))
+		mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+	if (test_and_clear_bit(FLG_ACK_PEND, &l2->flag))
+		enquiry_cr(l2, RR, RSP, 0);
+}
+
+static void
+l2_got_tei(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	u_int		info;
+
+	l2->tei = (signed char)(long)arg;
+	set_channel_address(&l2->ch, l2->sapi, l2->tei);
+	info = DL_INFO_L2_CONNECT;
+	l2up_create(l2, DL_INFORMATION_IND, sizeof(info), &info);
+	if (fi->state == ST_L2_3) {
+		establishlink(fi);
+		test_and_set_bit(FLG_L3_INIT, &l2->flag);
+	} else
+		mISDN_FsmChangeState(fi, ST_L2_4);
+	if (skb_queue_len(&l2->ui_queue))
+		tx_ui(l2);
+}
+
+static void
+l2_st5_tout_200(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+	} else if (l2->rc == l2->N200) {
+		mISDN_FsmChangeState(fi, ST_L2_4);
+		test_and_clear_bit(FLG_T200_RUN, &l2->flag);
+		skb_queue_purge(&l2->i_queue);
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'G');
+		if (test_bit(FLG_LAPB, &l2->flag))
+			l2down_create(l2, PH_DEACTIVATE_REQ,
+				l2_newid(l2), 0, NULL);
+		st5_dl_release_l2l3(l2);
+		if (l2->tm)
+			l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	} else {
+		l2->rc++;
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+		send_uframe(l2, NULL, (test_bit(FLG_MOD128, &l2->flag) ?
+			SABME : SABM) | 0x10, CMD);
+	}
+}
+
+static void
+l2_st6_tout_200(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+	} else if (l2->rc == l2->N200) {
+		mISDN_FsmChangeState(fi, ST_L2_4);
+		test_and_clear_bit(FLG_T200_RUN, &l2->flag);
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'H');
+		lapb_dl_release_l2l3(l2, DL_RELEASE_CNF);
+		if (l2->tm)
+			l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	} else {
+		l2->rc++;
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200,
+			    NULL, 9);
+		send_uframe(l2, NULL, DISC | 0x10, CMD);
+	}
+}
+
+static void
+l2_st7_tout_200(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+		return;
+	}
+	test_and_clear_bit(FLG_T200_RUN, &l2->flag);
+	l2->rc = 0;
+	mISDN_FsmChangeState(fi, ST_L2_8);
+	transmit_enquiry(l2);
+	l2->rc++;
+}
+
+static void
+l2_st8_tout_200(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 9);
+		return;
+	}
+	test_and_clear_bit(FLG_T200_RUN, &l2->flag);
+	if (l2->rc == l2->N200) {
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'I');
+		establishlink(fi);
+		test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+	} else {
+		transmit_enquiry(l2);
+		l2->rc++;
+	}
+}
+
+static void
+l2_st7_tout_203(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	if (test_bit(FLG_LAPD, &l2->flag) &&
+		test_bit(FLG_DCHAN_BUSY, &l2->flag)) {
+		mISDN_FsmAddTimer(&l2->t203, l2->T203, EV_L2_T203, NULL, 9);
+		return;
+	}
+	mISDN_FsmChangeState(fi, ST_L2_8);
+	transmit_enquiry(l2);
+	l2->rc = 0;
+}
+
+static void
+l2_pull_iqueue(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2	*l2 = fi->userdata;
+	struct sk_buff	*skb, *nskb, *oskb;
+	u_char		header[MAX_L2HEADER_LEN];
+	u_int		i, p1;
+
+	if (!cansend(l2))
+		return;
+
+	skb = skb_dequeue(&l2->i_queue);
+	if (!skb)
+		return;
+
+	if (test_bit(FLG_MOD128, &l2->flag))
+		p1 = (l2->vs - l2->va) % 128;
+	else
+		p1 = (l2->vs - l2->va) % 8;
+	p1 = (p1 + l2->sow) % l2->window;
+	if (l2->windowar[p1]) {
+		printk(KERN_WARNING "isdnl2 try overwrite ack queue entry %d\n",
+		    p1);
+		dev_kfree_skb(l2->windowar[p1]);
+	}
+	l2->windowar[p1] = skb;
+	i = sethdraddr(l2, header, CMD);
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		header[i++] = l2->vs << 1;
+		header[i++] = l2->vr << 1;
+		l2->vs = (l2->vs + 1) % 128;
+	} else {
+		header[i++] = (l2->vr << 5) | (l2->vs << 1);
+		l2->vs = (l2->vs + 1) % 8;
+	}
+
+	nskb = skb_clone(skb, GFP_ATOMIC);
+	p1 = skb_headroom(nskb);
+	if (p1 >= i)
+		memcpy(skb_push(nskb, i), header, i);
+	else {
+		printk(KERN_WARNING
+		    "isdnl2 pull_iqueue skb header(%d/%d) too short\n", i, p1);
+		oskb = nskb;
+		nskb = mI_alloc_skb(oskb->len + i, GFP_ATOMIC);
+		if (!nskb) {
+			dev_kfree_skb(oskb);
+			printk(KERN_WARNING "%s: no skb mem\n", __func__);
+			return;
+		}
+		memcpy(skb_put(nskb, i), header, i);
+		memcpy(skb_put(nskb, oskb->len), oskb->data, oskb->len);
+		dev_kfree_skb(oskb);
+	}
+	l2down(l2, PH_DATA_REQ, l2_newid(l2), nskb);
+	test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	if (!test_and_set_bit(FLG_T200_RUN, &l2->flag)) {
+		mISDN_FsmDelTimer(&l2->t203, 13);
+		mISDN_FsmAddTimer(&l2->t200, l2->T200, EV_L2_T200, NULL, 11);
+	}
+}
+
+static void
+l2_st8_got_super(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+	int PollFlag, rsp, rnr = 0;
+	unsigned int nr;
+
+	rsp = *skb->data & 0x2;
+	if (test_bit(FLG_ORIG, &l2->flag))
+		rsp = !rsp;
+
+	skb_pull(skb, l2addrsize(l2));
+
+	if (IsRNR(skb->data, l2)) {
+		set_peer_busy(l2);
+		rnr = 1;
+	} else
+		clear_peer_busy(l2);
+
+	if (test_bit(FLG_MOD128, &l2->flag)) {
+		PollFlag = (skb->data[1] & 0x1) == 0x1;
+		nr = skb->data[1] >> 1;
+	} else {
+		PollFlag = (skb->data[0] & 0x10);
+		nr = (skb->data[0] >> 5) & 0x7;
+	}
+	dev_kfree_skb(skb);
+	if (rsp && PollFlag) {
+		if (legalnr(l2, nr)) {
+			if (rnr) {
+				restart_t200(l2, 15);
+			} else {
+				stop_t200(l2, 16);
+				mISDN_FsmAddTimer(&l2->t203, l2->T203,
+					    EV_L2_T203, NULL, 5);
+				setva(l2, nr);
+			}
+			invoke_retransmission(l2, nr);
+			mISDN_FsmChangeState(fi, ST_L2_7);
+			if (skb_queue_len(&l2->i_queue) && cansend(l2))
+				mISDN_FsmEvent(fi, EV_L2_ACK_PULL, NULL);
+		} else
+			nrerrorrecovery(fi);
+	} else {
+		if (!rsp && PollFlag)
+			enquiry_response(l2);
+		if (legalnr(l2, nr))
+			setva(l2, nr);
+		else
+			nrerrorrecovery(fi);
+	}
+}
+
+static void
+l2_got_FRMR(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_pull(skb, l2addrsize(l2) + 1);
+
+	if (!(skb->data[0] & 1) || ((skb->data[0] & 3) == 1) || /* I or S */
+	    (IsUA(skb->data) && (fi->state == ST_L2_7))) {
+		l2mgr(l2, MDL_ERROR_IND, (void *) 'K');
+		establishlink(fi);
+		test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+	}
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_st24_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->ui_queue);
+	l2->tei = GROUP_TEI;
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_st3_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->ui_queue);
+	l2->tei = GROUP_TEI;
+	l2up_create(l2, DL_RELEASE_IND, 0, NULL);
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_st5_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	freewin(l2);
+	l2->tei = GROUP_TEI;
+	stop_t200(l2, 17);
+	st5_dl_release_l2l3(l2);
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_st6_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->ui_queue);
+	l2->tei = GROUP_TEI;
+	stop_t200(l2, 18);
+	l2up_create(l2, DL_RELEASE_IND, 0, NULL);
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_tei_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	freewin(l2);
+	l2->tei = GROUP_TEI;
+	stop_t200(l2, 17);
+	mISDN_FsmDelTimer(&l2->t203, 19);
+	l2up_create(l2, DL_RELEASE_IND, 0, NULL);
+/*	mISDN_queue_data(&l2->inst, l2->inst.id | MSG_BROADCAST,
+ *		MGR_SHORTSTATUS_IND, SSTATUS_L2_RELEASED,
+ *		0, NULL, 0);
+ */
+	mISDN_FsmChangeState(fi, ST_L2_1);
+}
+
+static void
+l2_st14_persistant_da(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	if (test_and_clear_bit(FLG_ESTAB_PEND, &l2->flag))
+		l2up(l2, DL_RELEASE_IND, skb);
+	else
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_st5_persistant_da(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	freewin(l2);
+	stop_t200(l2, 19);
+	st5_dl_release_l2l3(l2);
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+	dev_kfree_skb(skb);
+}
+
+static void
+l2_st6_persistant_da(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->ui_queue);
+	stop_t200(l2, 20);
+	l2up(l2, DL_RELEASE_CNF, skb);
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+}
+
+static void
+l2_persistant_da(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	freewin(l2);
+	stop_t200(l2, 19);
+	mISDN_FsmDelTimer(&l2->t203, 19);
+	l2up(l2, DL_RELEASE_IND, skb);
+	mISDN_FsmChangeState(fi, ST_L2_4);
+	if (l2->tm)
+		l2_tei(l2, MDL_STATUS_DOWN_IND, 0);
+}
+
+static void
+l2_set_own_busy(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!test_and_set_bit(FLG_OWN_BUSY, &l2->flag)) {
+		enquiry_cr(l2, RNR, RSP, 0);
+		test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_clear_own_busy(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+	struct sk_buff *skb = arg;
+
+	if (!test_and_clear_bit(FLG_OWN_BUSY, &l2->flag)) {
+		enquiry_cr(l2, RR, RSP, 0);
+		test_and_clear_bit(FLG_ACK_PEND, &l2->flag);
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+}
+
+static void
+l2_frame_error(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	l2mgr(l2, MDL_ERROR_IND, arg);
+}
+
+static void
+l2_frame_error_reest(struct FsmInst *fi, int event, void *arg)
+{
+	struct layer2 *l2 = fi->userdata;
+
+	l2mgr(l2, MDL_ERROR_IND, arg);
+	establishlink(fi);
+	test_and_clear_bit(FLG_L3_INIT, &l2->flag);
+}
+
+static struct FsmNode L2FnList[] =
+{
+	{ST_L2_1, EV_L2_DL_ESTABLISH_REQ, l2_mdl_assign},
+	{ST_L2_2, EV_L2_DL_ESTABLISH_REQ, l2_go_st3},
+	{ST_L2_4, EV_L2_DL_ESTABLISH_REQ, l2_establish},
+	{ST_L2_5, EV_L2_DL_ESTABLISH_REQ, l2_discard_i_setl3},
+	{ST_L2_7, EV_L2_DL_ESTABLISH_REQ, l2_l3_reestablish},
+	{ST_L2_8, EV_L2_DL_ESTABLISH_REQ, l2_l3_reestablish},
+	{ST_L2_4, EV_L2_DL_RELEASE_REQ, l2_release},
+	{ST_L2_5, EV_L2_DL_RELEASE_REQ, l2_pend_rel},
+	{ST_L2_7, EV_L2_DL_RELEASE_REQ, l2_disconnect},
+	{ST_L2_8, EV_L2_DL_RELEASE_REQ, l2_disconnect},
+	{ST_L2_5, EV_L2_DL_DATA, l2_feed_i_if_reest},
+	{ST_L2_7, EV_L2_DL_DATA, l2_feed_i_pull},
+	{ST_L2_8, EV_L2_DL_DATA, l2_feed_iqueue},
+	{ST_L2_1, EV_L2_DL_UNITDATA, l2_queue_ui_assign},
+	{ST_L2_2, EV_L2_DL_UNITDATA, l2_queue_ui},
+	{ST_L2_3, EV_L2_DL_UNITDATA, l2_queue_ui},
+	{ST_L2_4, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_5, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_6, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_7, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_8, EV_L2_DL_UNITDATA, l2_send_ui},
+	{ST_L2_1, EV_L2_MDL_ASSIGN, l2_got_tei},
+	{ST_L2_2, EV_L2_MDL_ASSIGN, l2_got_tei},
+	{ST_L2_3, EV_L2_MDL_ASSIGN, l2_got_tei},
+	{ST_L2_2, EV_L2_MDL_ERROR, l2_st24_tei_remove},
+	{ST_L2_3, EV_L2_MDL_ERROR, l2_st3_tei_remove},
+	{ST_L2_4, EV_L2_MDL_REMOVE, l2_st24_tei_remove},
+	{ST_L2_5, EV_L2_MDL_REMOVE, l2_st5_tei_remove},
+	{ST_L2_6, EV_L2_MDL_REMOVE, l2_st6_tei_remove},
+	{ST_L2_7, EV_L2_MDL_REMOVE, l2_tei_remove},
+	{ST_L2_8, EV_L2_MDL_REMOVE, l2_tei_remove},
+	{ST_L2_4, EV_L2_SABME, l2_start_multi},
+	{ST_L2_5, EV_L2_SABME, l2_send_UA},
+	{ST_L2_6, EV_L2_SABME, l2_send_DM},
+	{ST_L2_7, EV_L2_SABME, l2_restart_multi},
+	{ST_L2_8, EV_L2_SABME, l2_restart_multi},
+	{ST_L2_4, EV_L2_DISC, l2_send_DM},
+	{ST_L2_5, EV_L2_DISC, l2_send_DM},
+	{ST_L2_6, EV_L2_DISC, l2_send_UA},
+	{ST_L2_7, EV_L2_DISC, l2_stop_multi},
+	{ST_L2_8, EV_L2_DISC, l2_stop_multi},
+	{ST_L2_4, EV_L2_UA, l2_mdl_error_ua},
+	{ST_L2_5, EV_L2_UA, l2_connected},
+	{ST_L2_6, EV_L2_UA, l2_released},
+	{ST_L2_7, EV_L2_UA, l2_mdl_error_ua},
+	{ST_L2_8, EV_L2_UA, l2_mdl_error_ua},
+	{ST_L2_4, EV_L2_DM, l2_reestablish},
+	{ST_L2_5, EV_L2_DM, l2_st5_dm_release},
+	{ST_L2_6, EV_L2_DM, l2_st6_dm_release},
+	{ST_L2_7, EV_L2_DM, l2_mdl_error_dm},
+	{ST_L2_8, EV_L2_DM, l2_st8_mdl_error_dm},
+	{ST_L2_1, EV_L2_UI, l2_got_ui},
+	{ST_L2_2, EV_L2_UI, l2_got_ui},
+	{ST_L2_3, EV_L2_UI, l2_got_ui},
+	{ST_L2_4, EV_L2_UI, l2_got_ui},
+	{ST_L2_5, EV_L2_UI, l2_got_ui},
+	{ST_L2_6, EV_L2_UI, l2_got_ui},
+	{ST_L2_7, EV_L2_UI, l2_got_ui},
+	{ST_L2_8, EV_L2_UI, l2_got_ui},
+	{ST_L2_7, EV_L2_FRMR, l2_got_FRMR},
+	{ST_L2_8, EV_L2_FRMR, l2_got_FRMR},
+	{ST_L2_7, EV_L2_SUPER, l2_st7_got_super},
+	{ST_L2_8, EV_L2_SUPER, l2_st8_got_super},
+	{ST_L2_7, EV_L2_I, l2_got_iframe},
+	{ST_L2_8, EV_L2_I, l2_got_iframe},
+	{ST_L2_5, EV_L2_T200, l2_st5_tout_200},
+	{ST_L2_6, EV_L2_T200, l2_st6_tout_200},
+	{ST_L2_7, EV_L2_T200, l2_st7_tout_200},
+	{ST_L2_8, EV_L2_T200, l2_st8_tout_200},
+	{ST_L2_7, EV_L2_T203, l2_st7_tout_203},
+	{ST_L2_7, EV_L2_ACK_PULL, l2_pull_iqueue},
+	{ST_L2_7, EV_L2_SET_OWN_BUSY, l2_set_own_busy},
+	{ST_L2_8, EV_L2_SET_OWN_BUSY, l2_set_own_busy},
+	{ST_L2_7, EV_L2_CLEAR_OWN_BUSY, l2_clear_own_busy},
+	{ST_L2_8, EV_L2_CLEAR_OWN_BUSY, l2_clear_own_busy},
+	{ST_L2_4, EV_L2_FRAME_ERROR, l2_frame_error},
+	{ST_L2_5, EV_L2_FRAME_ERROR, l2_frame_error},
+	{ST_L2_6, EV_L2_FRAME_ERROR, l2_frame_error},
+	{ST_L2_7, EV_L2_FRAME_ERROR, l2_frame_error_reest},
+	{ST_L2_8, EV_L2_FRAME_ERROR, l2_frame_error_reest},
+	{ST_L2_1, EV_L1_DEACTIVATE, l2_st14_persistant_da},
+	{ST_L2_2, EV_L1_DEACTIVATE, l2_st24_tei_remove},
+	{ST_L2_3, EV_L1_DEACTIVATE, l2_st3_tei_remove},
+	{ST_L2_4, EV_L1_DEACTIVATE, l2_st14_persistant_da},
+	{ST_L2_5, EV_L1_DEACTIVATE, l2_st5_persistant_da},
+	{ST_L2_6, EV_L1_DEACTIVATE, l2_st6_persistant_da},
+	{ST_L2_7, EV_L1_DEACTIVATE, l2_persistant_da},
+	{ST_L2_8, EV_L1_DEACTIVATE, l2_persistant_da},
+};
+
+#define L2_FN_COUNT (sizeof(L2FnList)/sizeof(struct FsmNode))
+
+static int
+ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
+{
+	u_char	*datap = skb->data;
+	int	ret = -EINVAL;
+	int	psapi, ptei;
+	u_int	l;
+	int	c = 0;
+
+	l = l2addrsize(l2);
+	if (skb->len <= l) {
+		mISDN_FsmEvent(&l2->l2m, EV_L2_FRAME_ERROR, (void *) 'N');
+		return ret;
+	}
+	if (test_bit(FLG_LAPD, &l2->flag)) { /* Maybe not needed */
+		psapi = *datap++;
+		ptei = *datap++;
+		if ((psapi & 1) || !(ptei & 1)) {
+			printk(KERN_WARNING
+			    "l2 D-channel frame wrong EA0/EA1\n");
+			return ret;
+		}
+		psapi >>= 2;
+		ptei >>= 1;
+		if (psapi != l2->sapi) {
+			/* not our bussiness
+			 * printk(KERN_DEBUG "%s: sapi %d/%d sapi mismatch\n",
+			 *  __func__,
+			 *	psapi, l2->sapi);
+			 */
+			dev_kfree_skb(skb);
+			return 0;
+		}
+		if ((ptei != l2->tei) && (ptei != GROUP_TEI)) {
+			/* not our bussiness
+			 * printk(KERN_DEBUG "%s: tei %d/%d sapi %d mismatch\n",
+			 *  __func__,
+			 *	ptei, l2->tei, psapi);
+			 */
+			dev_kfree_skb(skb);
+			return 0;
+		}
+	} else
+		datap += l;
+	if (!(*datap & 1)) {	/* I-Frame */
+		c = iframe_error(l2, skb);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_I, skb);
+	} else if (IsSFrame(datap, l2)) {	/* S-Frame */
+		c = super_error(l2, skb);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_SUPER, skb);
+	} else if (IsUI(datap)) {
+		c = UI_error(l2, skb);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_UI, skb);
+	} else if (IsSABME(datap, l2)) {
+		c = unnum_error(l2, skb, CMD);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_SABME, skb);
+	} else if (IsUA(datap)) {
+		c = unnum_error(l2, skb, RSP);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_UA, skb);
+	} else if (IsDISC(datap)) {
+		c = unnum_error(l2, skb, CMD);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DISC, skb);
+	} else if (IsDM(datap)) {
+		c = unnum_error(l2, skb, RSP);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DM, skb);
+	} else if (IsFRMR(datap)) {
+		c = FRMR_error(l2, skb);
+		if (!c)
+			ret = mISDN_FsmEvent(&l2->l2m, EV_L2_FRMR, skb);
+	} else
+		c = 'L';
+	if (c) {
+		printk(KERN_WARNING "l2 D-channel frame error %c\n", c);
+		mISDN_FsmEvent(&l2->l2m, EV_L2_FRAME_ERROR, (void *)(long)c);
+	}
+	return ret;
+}
+
+static int
+l2_send(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct layer2		*l2 = container_of(ch, struct layer2, ch);
+	struct mISDNhead	*hh =  mISDN_HEAD_P(skb);
+	int 			ret = -EINVAL;
+
+	if (*debug & DEBUG_L2_RECV)
+		printk(KERN_DEBUG "%s: prim(%x) id(%x) tei(%d)\n",
+		    __func__, hh->prim, hh->id, l2->tei);
+	switch (hh->prim) {
+	case PH_DATA_IND:
+		ret = ph_data_indication(l2, hh, skb);
+		break;
+	case PH_DATA_CNF:
+		ret = ph_data_confirm(l2, hh, skb);
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(FLG_L1_ACTIV, &l2->flag);
+		l2up_create(l2, MPH_ACTIVATE_IND, 0, NULL);
+		if (test_and_clear_bit(FLG_ESTAB_PEND, &l2->flag))
+			ret = mISDN_FsmEvent(&l2->l2m,
+				EV_L2_DL_ESTABLISH_REQ, skb);
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(FLG_L1_ACTIV, &l2->flag);
+		l2up_create(l2, MPH_DEACTIVATE_IND, 0, NULL);
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L1_DEACTIVATE, skb);
+		break;
+	case MPH_INFORMATION_IND:
+		if (!l2->up)
+			break;
+		ret = l2->up->send(l2->up, skb);
+		break;
+	case DL_DATA_REQ:
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DL_DATA, skb);
+		break;
+	case DL_UNITDATA_REQ:
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DL_UNITDATA, skb);
+		break;
+	case DL_ESTABLISH_REQ:
+		if (test_bit(FLG_LAPB, &l2->flag))
+			test_and_set_bit(FLG_ORIG, &l2->flag);
+		if (test_bit(FLG_L1_ACTIV, &l2->flag)) {
+			if (test_bit(FLG_LAPD, &l2->flag) ||
+				test_bit(FLG_ORIG, &l2->flag))
+				ret = mISDN_FsmEvent(&l2->l2m,
+					EV_L2_DL_ESTABLISH_REQ, skb);
+		} else {
+			if (test_bit(FLG_LAPD, &l2->flag) ||
+				test_bit(FLG_ORIG, &l2->flag)) {
+				test_and_set_bit(FLG_ESTAB_PEND,
+					&l2->flag);
+			}
+			ret = l2down(l2, PH_ACTIVATE_REQ, l2_newid(l2),
+			    skb);
+		}
+		break;
+	case DL_RELEASE_REQ:
+		if (test_bit(FLG_LAPB, &l2->flag))
+			l2down_create(l2, PH_DEACTIVATE_REQ,
+				l2_newid(l2), 0, NULL);
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_DL_RELEASE_REQ,
+		    skb);
+		break;
+	default:
+		if (*debug & DEBUG_L2)
+			l2m_debug(&l2->l2m, "l2 unknown pr %04x",
+			    hh->prim);
+	}
+	if (ret) {
+		dev_kfree_skb(skb);
+		ret = 0;
+	}
+	return ret;
+}
+
+int
+tei_l2(struct layer2 *l2, u_int cmd, u_long arg)
+{
+	int		ret = -EINVAL;
+
+	if (*debug & DEBUG_L2_TEI)
+		printk(KERN_DEBUG "%s: cmd(%x)\n", __func__, cmd);
+	switch (cmd) {
+	case (MDL_ASSIGN_REQ):
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_MDL_ASSIGN, (void *)arg);
+		break;
+	case (MDL_REMOVE_REQ):
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_MDL_REMOVE, NULL);
+		break;
+	case (MDL_ERROR_IND):
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_MDL_ERROR, NULL);
+		break;
+	case (MDL_ERROR_RSP):
+		/* ETS 300-125 5.3.2.1 Test: TC13010 */
+		printk(KERN_NOTICE "MDL_ERROR|REQ (tei_l2)\n");
+		ret = mISDN_FsmEvent(&l2->l2m, EV_L2_MDL_ERROR, NULL);
+		break;
+	}
+	return ret;
+}
+
+static void
+release_l2(struct layer2 *l2)
+{
+	mISDN_FsmDelTimer(&l2->t200, 21);
+	mISDN_FsmDelTimer(&l2->t203, 16);
+	skb_queue_purge(&l2->i_queue);
+	skb_queue_purge(&l2->ui_queue);
+	skb_queue_purge(&l2->down_queue);
+	ReleaseWin(l2);
+	if (test_bit(FLG_LAPD, &l2->flag)) {
+		release_tei(l2);
+		if (l2->ch.st)
+			l2->ch.st->dev->D.ctrl(&l2->ch.st->dev->D,
+			    CLOSE_CHANNEL, NULL);
+	}
+	kfree(l2);
+}
+
+static int
+l2_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct layer2		*l2 = container_of(ch, struct layer2, ch);
+	u_int			info;
+
+	if (*debug & DEBUG_L2_CTRL)
+		printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
+
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		if (test_bit(FLG_LAPD, &l2->flag)) {
+			set_channel_address(&l2->ch, l2->sapi, l2->tei);
+			info = DL_INFO_L2_CONNECT;
+			l2up_create(l2, DL_INFORMATION_IND,
+			    sizeof(info), &info);
+		}
+		break;
+	case CLOSE_CHANNEL:
+		if (l2->ch.peer)
+			l2->ch.peer->ctrl(l2->ch.peer, CLOSE_CHANNEL, NULL);
+		release_l2(l2);
+		break;
+	}
+	return 0;
+}
+
+struct layer2 *
+create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, u_long arg)
+{
+	struct layer2		*l2;
+	struct channel_req	rq;
+
+	l2 = kzalloc(sizeof(struct layer2), GFP_KERNEL);
+	if (!l2) {
+		printk(KERN_ERR "kzalloc layer2 failed\n");
+		return NULL;
+	}
+	l2->next_id = 1;
+	l2->down_id = MISDN_ID_NONE;
+	l2->up = ch;
+	l2->ch.st = ch->st;
+	l2->ch.send = l2_send;
+	l2->ch.ctrl = l2_ctrl;
+	switch (protocol) {
+	case ISDN_P_LAPD_NT:
+		test_and_set_bit(FLG_LAPD, &l2->flag);
+		test_and_set_bit(FLG_LAPD_NET, &l2->flag);
+		test_and_set_bit(FLG_MOD128, &l2->flag);
+		l2->sapi = 0;
+		l2->maxlen = MAX_DFRAME_LEN;
+		if (test_bit(OPTION_L2_PMX, &options))
+			l2->window = 7;
+		else
+			l2->window = 1;
+		if (test_bit(OPTION_L2_PTP, &options))
+			test_and_set_bit(FLG_PTP, &l2->flag);
+		if (test_bit(OPTION_L2_FIXEDTEI, &options))
+			test_and_set_bit(FLG_FIXED_TEI, &l2->flag);
+		l2->tei = (u_int)arg;
+		l2->T200 = 1000;
+		l2->N200 = 3;
+		l2->T203 = 10000;
+		if (test_bit(OPTION_L2_PMX, &options))
+			rq.protocol = ISDN_P_NT_E1;
+		else
+			rq.protocol = ISDN_P_NT_S0;
+		rq.adr.channel = 0;
+		l2->ch.st->dev->D.ctrl(&l2->ch.st->dev->D, OPEN_CHANNEL, &rq);
+		break;
+	case ISDN_P_LAPD_TE:
+		test_and_set_bit(FLG_LAPD, &l2->flag);
+		test_and_set_bit(FLG_MOD128, &l2->flag);
+		test_and_set_bit(FLG_ORIG, &l2->flag);
+		l2->sapi = 0;
+		l2->maxlen = MAX_DFRAME_LEN;
+		if (test_bit(OPTION_L2_PMX, &options))
+			l2->window = 7;
+		else
+			l2->window = 1;
+		if (test_bit(OPTION_L2_PTP, &options))
+			test_and_set_bit(FLG_PTP, &l2->flag);
+		if (test_bit(OPTION_L2_FIXEDTEI, &options))
+			test_and_set_bit(FLG_FIXED_TEI, &l2->flag);
+		l2->tei = (u_int)arg;
+		l2->T200 = 1000;
+		l2->N200 = 3;
+		l2->T203 = 10000;
+		if (test_bit(OPTION_L2_PMX, &options))
+			rq.protocol = ISDN_P_TE_E1;
+		else
+			rq.protocol = ISDN_P_TE_S0;
+		rq.adr.channel = 0;
+		l2->ch.st->dev->D.ctrl(&l2->ch.st->dev->D, OPEN_CHANNEL, &rq);
+		break;
+	case ISDN_P_B_X75SLP:
+		test_and_set_bit(FLG_LAPB, &l2->flag);
+		l2->window = 7;
+		l2->maxlen = MAX_DATA_SIZE;
+		l2->T200 = 1000;
+		l2->N200 = 4;
+		l2->T203 = 5000;
+		l2->addr.A = 3;
+		l2->addr.B = 1;
+		break;
+	default:
+		printk(KERN_ERR "layer2 create failed prt %x\n",
+			protocol);
+		kfree(l2);
+		return NULL;
+	}
+	skb_queue_head_init(&l2->i_queue);
+	skb_queue_head_init(&l2->ui_queue);
+	skb_queue_head_init(&l2->down_queue);
+	skb_queue_head_init(&l2->tmp_queue);
+	InitWin(l2);
+	l2->l2m.fsm = &l2fsm;
+	if (test_bit(FLG_LAPB, &l2->flag) ||
+		test_bit(FLG_PTP, &l2->flag) ||
+		test_bit(FLG_LAPD_NET, &l2->flag))
+		l2->l2m.state = ST_L2_4;
+	else
+		l2->l2m.state = ST_L2_1;
+	l2->l2m.debug = *debug;
+	l2->l2m.userdata = l2;
+	l2->l2m.userint = 0;
+	l2->l2m.printdebug = l2m_debug;
+
+	mISDN_FsmInitTimer(&l2->l2m, &l2->t200);
+	mISDN_FsmInitTimer(&l2->l2m, &l2->t203);
+	return l2;
+}
+
+static int
+x75create(struct channel_req *crq)
+{
+	struct layer2	*l2;
+
+	if (crq->protocol != ISDN_P_B_X75SLP)
+		return -EPROTONOSUPPORT;
+	l2 = create_l2(crq->ch, crq->protocol, 0, 0);
+	if (!l2)
+		return -ENOMEM;
+	crq->ch = &l2->ch;
+	crq->protocol = ISDN_P_B_HDLC;
+	return 0;
+}
+
+static struct Bprotocol X75SLP = {
+	.Bprotocols = (1 << (ISDN_P_B_X75SLP & ISDN_P_B_MASK)),
+	.name = "X75SLP",
+	.create = x75create
+};
+
+int
+Isdnl2_Init(u_int *deb)
+{
+	debug = deb;
+	mISDN_register_Bprotocol(&X75SLP);
+	l2fsm.state_count = L2_STATE_COUNT;
+	l2fsm.event_count = L2_EVENT_COUNT;
+	l2fsm.strEvent = strL2Event;
+	l2fsm.strState = strL2State;
+	mISDN_FsmNew(&l2fsm, L2FnList, ARRAY_SIZE(L2FnList));
+	TEIInit(deb);
+	return 0;
+}
+
+void
+Isdnl2_cleanup(void)
+{
+	mISDN_unregister_Bprotocol(&X75SLP);
+	TEIFree();
+	mISDN_FsmFree(&l2fsm);
+}
+
diff --git a/drivers/isdn/mISDN/layer2.h b/drivers/isdn/mISDN/layer2.h
new file mode 100644
index 00000000000..de2dd02056a
--- /dev/null
+++ b/drivers/isdn/mISDN/layer2.h
@@ -0,0 +1,140 @@
+/*
+ * Layer 2 defines
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/skbuff.h>
+#include "fsm.h"
+
+#define MAX_WINDOW	8
+
+struct manager {
+	struct mISDNchannel	ch;
+	struct mISDNchannel	bcast;
+	u_long			options;
+	struct list_head	layer2;
+	rwlock_t		lock;
+	struct FsmInst		deact;
+	struct FsmTimer		datimer;
+	struct sk_buff_head	sendq;
+	struct mISDNchannel	*up;
+	u_int			nextid;
+	u_int			lastid;
+};
+
+struct teimgr {
+	int			ri;
+	int			rcnt;
+	struct FsmInst		tei_m;
+	struct FsmTimer		timer;
+	int			tval, nval;
+	struct layer2		*l2;
+	struct manager		*mgr;
+};
+
+struct laddr {
+	u_char	A;
+	u_char	B;
+};
+
+struct layer2 {
+	struct list_head	list;
+	struct mISDNchannel	ch;
+	u_long			flag;
+	int			id;
+	struct mISDNchannel	*up;
+	signed char		sapi;
+	signed char		tei;
+	struct laddr		addr;
+	u_int			maxlen;
+	struct teimgr		*tm;
+	u_int			vs, va, vr;
+	int			rc;
+	u_int			window;
+	u_int			sow;
+	struct FsmInst		l2m;
+	struct FsmTimer		t200, t203;
+	int			T200, N200, T203;
+	u_int			next_id;
+	u_int			down_id;
+	struct sk_buff		*windowar[MAX_WINDOW];
+	struct sk_buff_head	i_queue;
+	struct sk_buff_head	ui_queue;
+	struct sk_buff_head	down_queue;
+	struct sk_buff_head	tmp_queue;
+};
+
+enum {
+	ST_L2_1,
+	ST_L2_2,
+	ST_L2_3,
+	ST_L2_4,
+	ST_L2_5,
+	ST_L2_6,
+	ST_L2_7,
+	ST_L2_8,
+};
+
+#define L2_STATE_COUNT (ST_L2_8+1)
+
+extern struct layer2	*create_l2(struct mISDNchannel *, u_int,
+				u_long, u_long);
+extern int		tei_l2(struct layer2 *, u_int, u_long arg);
+
+
+/* from tei.c */
+extern int 		l2_tei(struct layer2 *, u_int, u_long arg);
+extern void 		release_tei(struct layer2 *);
+extern int 		TEIInit(u_int *);
+extern void 		TEIFree(void);
+
+#define MAX_L2HEADER_LEN 4
+
+#define RR	0x01
+#define RNR	0x05
+#define REJ	0x09
+#define SABME	0x6f
+#define SABM	0x2f
+#define DM	0x0f
+#define UI	0x03
+#define DISC	0x43
+#define UA	0x63
+#define FRMR	0x87
+#define XID	0xaf
+
+#define CMD	0
+#define RSP	1
+
+#define LC_FLUSH_WAIT 1
+
+#define FLG_LAPB	0
+#define FLG_LAPD	1
+#define FLG_ORIG	2
+#define FLG_MOD128	3
+#define FLG_PEND_REL	4
+#define FLG_L3_INIT	5
+#define FLG_T200_RUN	6
+#define FLG_ACK_PEND	7
+#define FLG_REJEXC	8
+#define FLG_OWN_BUSY	9
+#define FLG_PEER_BUSY	10
+#define FLG_DCHAN_BUSY	11
+#define FLG_L1_ACTIV	12
+#define FLG_ESTAB_PEND	13
+#define FLG_PTP		14
+#define FLG_FIXED_TEI	15
+#define FLG_L2BLOCK	16
+#define FLG_L1_NOTREADY	17
+#define FLG_LAPD_NET	18
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
new file mode 100644
index 00000000000..4ba4cc364c9
--- /dev/null
+++ b/drivers/isdn/mISDN/socket.c
@@ -0,0 +1,781 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include "core.h"
+
+static int	*debug;
+
+static struct proto mISDN_proto = {
+	.name		= "misdn",
+	.owner		= THIS_MODULE,
+	.obj_size	= sizeof(struct mISDN_sock)
+};
+
+#define _pms(sk)	((struct mISDN_sock *)sk)
+
+static struct mISDN_sock_list	data_sockets = {
+	.lock = __RW_LOCK_UNLOCKED(data_sockets.lock)
+};
+
+static struct mISDN_sock_list	base_sockets = {
+	.lock = __RW_LOCK_UNLOCKED(base_sockets.lock)
+};
+
+#define L2_HEADER_LEN	4
+
+static inline struct sk_buff *
+_l2_alloc_skb(unsigned int len, gfp_t gfp_mask)
+{
+	struct sk_buff  *skb;
+
+	skb = alloc_skb(len + L2_HEADER_LEN, gfp_mask);
+	if (likely(skb))
+		skb_reserve(skb, L2_HEADER_LEN);
+	return skb;
+}
+
+static void
+mISDN_sock_link(struct mISDN_sock_list *l, struct sock *sk)
+{
+	write_lock_bh(&l->lock);
+	sk_add_node(sk, &l->head);
+	write_unlock_bh(&l->lock);
+}
+
+static void mISDN_sock_unlink(struct mISDN_sock_list *l, struct sock *sk)
+{
+	write_lock_bh(&l->lock);
+	sk_del_node_init(sk);
+	write_unlock_bh(&l->lock);
+}
+
+static int
+mISDN_send(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDN_sock *msk;
+	int	err;
+
+	msk = container_of(ch, struct mISDN_sock, ch);
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s len %d %p\n", __func__, skb->len, skb);
+	if (msk->sk.sk_state == MISDN_CLOSED)
+		return -EUNATCH;
+	__net_timestamp(skb);
+	err = sock_queue_rcv_skb(&msk->sk, skb);
+	if (err)
+		printk(KERN_WARNING "%s: error %d\n", __func__, err);
+	return err;
+}
+
+static int
+mISDN_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDN_sock *msk;
+
+	msk = container_of(ch, struct mISDN_sock, ch);
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s(%p, %x, %p)\n", __func__, ch, cmd, arg);
+	switch (cmd) {
+	case CLOSE_CHANNEL:
+		msk->sk.sk_state = MISDN_CLOSED;
+		break;
+	}
+	return 0;
+}
+
+static inline void
+mISDN_sock_cmsg(struct sock *sk, struct msghdr *msg, struct sk_buff *skb)
+{
+	struct timeval	tv;
+
+	if (_pms(sk)->cmask & MISDN_TIME_STAMP) {
+		skb_get_timestamp(skb, &tv);
+		put_cmsg(msg, SOL_MISDN, MISDN_TIME_STAMP, sizeof(tv), &tv);
+	}
+}
+
+static int
+mISDN_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
+    struct msghdr *msg, size_t len, int flags)
+{
+	struct sk_buff		*skb;
+	struct sock		*sk = sock->sk;
+	struct sockaddr_mISDN	*maddr;
+
+	int		copied, err;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s: len %d, flags %x ch.nr %d, proto %x\n",
+			__func__, (int)len, flags, _pms(sk)->ch.nr,
+			sk->sk_protocol);
+	if (flags & (MSG_OOB))
+		return -EOPNOTSUPP;
+
+	if (sk->sk_state == MISDN_CLOSED)
+		return 0;
+
+	skb = skb_recv_datagram(sk, flags, flags & MSG_DONTWAIT, &err);
+	if (!skb)
+		return err;
+
+	if (msg->msg_namelen >= sizeof(struct sockaddr_mISDN)) {
+		msg->msg_namelen = sizeof(struct sockaddr_mISDN);
+		maddr = (struct sockaddr_mISDN *)msg->msg_name;
+		maddr->family = AF_ISDN;
+		maddr->dev = _pms(sk)->dev->id;
+		if ((sk->sk_protocol == ISDN_P_LAPD_TE) ||
+		    (sk->sk_protocol == ISDN_P_LAPD_NT)) {
+			maddr->channel = (mISDN_HEAD_ID(skb) >> 16) & 0xff;
+			maddr->tei =  (mISDN_HEAD_ID(skb) >> 8) & 0xff;
+			maddr->sapi = mISDN_HEAD_ID(skb) & 0xff;
+		} else {
+			maddr->channel = _pms(sk)->ch.nr;
+			maddr->sapi = _pms(sk)->ch.addr & 0xFF;
+			maddr->tei =  (_pms(sk)->ch.addr >> 8) & 0xFF;
+		}
+	} else {
+		if (msg->msg_namelen)
+			printk(KERN_WARNING "%s: too small namelen %d\n",
+			    __func__, msg->msg_namelen);
+		msg->msg_namelen = 0;
+	}
+
+	copied = skb->len + MISDN_HEADER_LEN;
+	if (len < copied) {
+		if (flags & MSG_PEEK)
+			atomic_dec(&skb->users);
+		else
+			skb_queue_head(&sk->sk_receive_queue, skb);
+		return -ENOSPC;
+	}
+	memcpy(skb_push(skb, MISDN_HEADER_LEN), mISDN_HEAD_P(skb),
+	    MISDN_HEADER_LEN);
+
+	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+
+	mISDN_sock_cmsg(sk, msg, skb);
+
+	skb_free_datagram(sk, skb);
+
+	return err ? : copied;
+}
+
+static int
+mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
+    struct msghdr *msg, size_t len)
+{
+	struct sock		*sk = sock->sk;
+	struct sk_buff		*skb;
+	int			err = -ENOMEM;
+	struct sockaddr_mISDN	*maddr;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s: len %d flags %x ch %d proto %x\n",
+		     __func__, (int)len, msg->msg_flags, _pms(sk)->ch.nr,
+		     sk->sk_protocol);
+
+	if (msg->msg_flags & MSG_OOB)
+		return -EOPNOTSUPP;
+
+	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_NOSIGNAL|MSG_ERRQUEUE))
+		return -EINVAL;
+
+	if (len < MISDN_HEADER_LEN)
+		return -EINVAL;
+
+	if (sk->sk_state != MISDN_BOUND)
+		return -EBADFD;
+
+	lock_sock(sk);
+
+	skb = _l2_alloc_skb(len, GFP_KERNEL);
+	if (!skb)
+		goto done;
+
+	if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
+		err = -EFAULT;
+		goto drop;
+	}
+
+	memcpy(mISDN_HEAD_P(skb), skb->data, MISDN_HEADER_LEN);
+	skb_pull(skb, MISDN_HEADER_LEN);
+
+	if (msg->msg_namelen >= sizeof(struct sockaddr_mISDN)) {
+		/* if we have a address, we use it */
+		maddr = (struct sockaddr_mISDN *)msg->msg_name;
+		mISDN_HEAD_ID(skb) = maddr->channel;
+	} else { /* use default for L2 messages */
+		if ((sk->sk_protocol == ISDN_P_LAPD_TE) ||
+		    (sk->sk_protocol == ISDN_P_LAPD_NT))
+		    mISDN_HEAD_ID(skb) = _pms(sk)->ch.nr;
+	}
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s: ID:%x\n",
+		     __func__, mISDN_HEAD_ID(skb));
+
+	err = -ENODEV;
+	if (!_pms(sk)->ch.peer ||
+	    (err = _pms(sk)->ch.recv(_pms(sk)->ch.peer, skb)))
+		goto drop;
+
+	err = len;
+
+done:
+	release_sock(sk);
+	return err;
+
+drop:
+	kfree_skb(skb);
+	goto done;
+}
+
+static int
+data_sock_release(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s(%p) sk=%p\n", __func__, sock, sk);
+	if (!sk)
+		return 0;
+	switch (sk->sk_protocol) {
+	case ISDN_P_TE_S0:
+	case ISDN_P_NT_S0:
+	case ISDN_P_TE_E1:
+	case ISDN_P_NT_E1:
+		if (sk->sk_state == MISDN_BOUND)
+			delete_channel(&_pms(sk)->ch);
+		else
+			mISDN_sock_unlink(&data_sockets, sk);
+		break;
+	case ISDN_P_LAPD_TE:
+	case ISDN_P_LAPD_NT:
+	case ISDN_P_B_RAW:
+	case ISDN_P_B_HDLC:
+	case ISDN_P_B_X75SLP:
+	case ISDN_P_B_L2DTMF:
+	case ISDN_P_B_L2DSP:
+	case ISDN_P_B_L2DSPHDLC:
+		delete_channel(&_pms(sk)->ch);
+		mISDN_sock_unlink(&data_sockets, sk);
+		break;
+	}
+
+	lock_sock(sk);
+
+	sock_orphan(sk);
+	skb_queue_purge(&sk->sk_receive_queue);
+
+	release_sock(sk);
+	sock_put(sk);
+
+	return 0;
+}
+
+static int
+data_sock_ioctl_bound(struct sock *sk, unsigned int cmd, void __user *p)
+{
+	struct mISDN_ctrl_req	cq;
+	int			err = -EINVAL, val;
+	struct mISDNchannel	*bchan, *next;
+
+	lock_sock(sk);
+	if (!_pms(sk)->dev) {
+		err = -ENODEV;
+		goto done;
+	}
+	switch (cmd) {
+	case IMCTRLREQ:
+		if (copy_from_user(&cq, p, sizeof(cq))) {
+			err = -EFAULT;
+			break;
+		}
+		if ((sk->sk_protocol & ~ISDN_P_B_MASK) == ISDN_P_B_START) {
+			list_for_each_entry_safe(bchan, next,
+				&_pms(sk)->dev->bchannels, list) {
+				if (bchan->nr == cq.channel) {
+					err = bchan->ctrl(bchan,
+						CONTROL_CHANNEL, &cq);
+					break;
+				}
+			}
+		} else
+			err = _pms(sk)->dev->D.ctrl(&_pms(sk)->dev->D,
+				CONTROL_CHANNEL, &cq);
+		if (err)
+			break;
+		if (copy_to_user(p, &cq, sizeof(cq)))
+			err = -EFAULT;
+		break;
+	case IMCLEAR_L2:
+		if (sk->sk_protocol != ISDN_P_LAPD_NT) {
+			err = -EINVAL;
+			break;
+		}
+		if (get_user(val, (int __user *)p)) {
+			err = -EFAULT;
+			break;
+		}
+		err = _pms(sk)->dev->teimgr->ctrl(_pms(sk)->dev->teimgr,
+		    CONTROL_CHANNEL, &val);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+done:
+	release_sock(sk);
+	return err;
+}
+
+static int
+data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+	int 			err = 0, id;
+	struct sock		*sk = sock->sk;
+	struct mISDNdevice	*dev;
+	struct mISDNversion	ver;
+
+	switch (cmd) {
+	case IMGETVERSION:
+		ver.major = MISDN_MAJOR_VERSION;
+		ver.minor = MISDN_MINOR_VERSION;
+		ver.release = MISDN_RELEASE;
+		if (copy_to_user((void __user *)arg, &ver, sizeof(ver)))
+			err = -EFAULT;
+		break;
+	case IMGETCOUNT:
+		id = get_mdevice_count();
+		if (put_user(id, (int __user *)arg))
+			err = -EFAULT;
+		break;
+	case IMGETDEVINFO:
+		if (get_user(id, (int __user *)arg)) {
+			err = -EFAULT;
+			break;
+		}
+		dev = get_mdevice(id);
+		if (dev) {
+			struct mISDN_devinfo di;
+
+			di.id = dev->id;
+			di.Dprotocols = dev->Dprotocols;
+			di.Bprotocols = dev->Bprotocols | get_all_Bprotocols();
+			di.protocol = dev->D.protocol;
+			memcpy(di.channelmap, dev->channelmap,
+				MISDN_CHMAP_SIZE * 4);
+			di.nrbchan = dev->nrbchan;
+			strcpy(di.name, dev->name);
+			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
+				err = -EFAULT;
+		} else
+			err = -ENODEV;
+		break;
+	default:
+		if (sk->sk_state == MISDN_BOUND)
+			err = data_sock_ioctl_bound(sk, cmd,
+				(void __user *)arg);
+		else
+			err = -ENOTCONN;
+	}
+	return err;
+}
+
+static int data_sock_setsockopt(struct socket *sock, int level, int optname,
+	char __user *optval, int len)
+{
+	struct sock *sk = sock->sk;
+	int err = 0, opt = 0;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s(%p, %d, %x, %p, %d)\n", __func__, sock,
+		    level, optname, optval, len);
+
+	lock_sock(sk);
+
+	switch (optname) {
+	case MISDN_TIME_STAMP:
+		if (get_user(opt, (int __user *)optval)) {
+			err = -EFAULT;
+			break;
+		}
+
+		if (opt)
+			_pms(sk)->cmask |= MISDN_TIME_STAMP;
+		else
+			_pms(sk)->cmask &= ~MISDN_TIME_STAMP;
+		break;
+	default:
+		err = -ENOPROTOOPT;
+		break;
+	}
+	release_sock(sk);
+	return err;
+}
+
+static int data_sock_getsockopt(struct socket *sock, int level, int optname,
+	char __user *optval, int __user *optlen)
+{
+	struct sock *sk = sock->sk;
+	int len, opt;
+
+	if (get_user(len, optlen))
+		return -EFAULT;
+
+	switch (optname) {
+	case MISDN_TIME_STAMP:
+		if (_pms(sk)->cmask & MISDN_TIME_STAMP)
+			opt = 1;
+		else
+			opt = 0;
+
+		if (put_user(opt, optval))
+			return -EFAULT;
+		break;
+	default:
+		return -ENOPROTOOPT;
+	}
+
+	return 0;
+}
+
+static int
+data_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
+{
+	struct sockaddr_mISDN *maddr = (struct sockaddr_mISDN *) addr;
+	struct sock *sk = sock->sk;
+	int err = 0;
+
+	if (*debug & DEBUG_SOCKET)
+		printk(KERN_DEBUG "%s(%p) sk=%p\n", __func__, sock, sk);
+	if (addr_len != sizeof(struct sockaddr_mISDN))
+		return -EINVAL;
+	if (!maddr || maddr->family != AF_ISDN)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	if (_pms(sk)->dev) {
+		err = -EALREADY;
+		goto done;
+	}
+	_pms(sk)->dev = get_mdevice(maddr->dev);
+	if (!_pms(sk)->dev) {
+		err = -ENODEV;
+		goto done;
+	}
+	_pms(sk)->ch.send = mISDN_send;
+	_pms(sk)->ch.ctrl = mISDN_ctrl;
+
+	switch (sk->sk_protocol) {
+	case ISDN_P_TE_S0:
+	case ISDN_P_NT_S0:
+	case ISDN_P_TE_E1:
+	case ISDN_P_NT_E1:
+		mISDN_sock_unlink(&data_sockets, sk);
+		err = connect_layer1(_pms(sk)->dev, &_pms(sk)->ch,
+		    sk->sk_protocol, maddr);
+		if (err)
+			mISDN_sock_link(&data_sockets, sk);
+		break;
+	case ISDN_P_LAPD_TE:
+	case ISDN_P_LAPD_NT:
+		err = create_l2entity(_pms(sk)->dev, &_pms(sk)->ch,
+		    sk->sk_protocol, maddr);
+		break;
+	case ISDN_P_B_RAW:
+	case ISDN_P_B_HDLC:
+	case ISDN_P_B_X75SLP:
+	case ISDN_P_B_L2DTMF:
+	case ISDN_P_B_L2DSP:
+	case ISDN_P_B_L2DSPHDLC:
+		err = connect_Bstack(_pms(sk)->dev, &_pms(sk)->ch,
+		    sk->sk_protocol, maddr);
+		break;
+	default:
+		err = -EPROTONOSUPPORT;
+	}
+	if (err)
+		goto done;
+	sk->sk_state = MISDN_BOUND;
+	_pms(sk)->ch.protocol = sk->sk_protocol;
+
+done:
+	release_sock(sk);
+	return err;
+}
+
+static int
+data_sock_getname(struct socket *sock, struct sockaddr *addr,
+    int *addr_len, int peer)
+{
+	struct sockaddr_mISDN 	*maddr = (struct sockaddr_mISDN *) addr;
+	struct sock		*sk = sock->sk;
+
+	if (!_pms(sk)->dev)
+		return -EBADFD;
+
+	lock_sock(sk);
+
+	*addr_len = sizeof(*maddr);
+	maddr->dev = _pms(sk)->dev->id;
+	maddr->channel = _pms(sk)->ch.nr;
+	maddr->sapi = _pms(sk)->ch.addr & 0xff;
+	maddr->tei = (_pms(sk)->ch.addr >> 8) & 0xff;
+	release_sock(sk);
+	return 0;
+}
+
+static const struct proto_ops data_sock_ops = {
+	.family		= PF_ISDN,
+	.owner		= THIS_MODULE,
+	.release	= data_sock_release,
+	.ioctl		= data_sock_ioctl,
+	.bind		= data_sock_bind,
+	.getname	= data_sock_getname,
+	.sendmsg	= mISDN_sock_sendmsg,
+	.recvmsg	= mISDN_sock_recvmsg,
+	.poll		= datagram_poll,
+	.listen		= sock_no_listen,
+	.shutdown	= sock_no_shutdown,
+	.setsockopt	= data_sock_setsockopt,
+	.getsockopt	= data_sock_getsockopt,
+	.connect	= sock_no_connect,
+	.socketpair	= sock_no_socketpair,
+	.accept		= sock_no_accept,
+	.mmap		= sock_no_mmap
+};
+
+static int
+data_sock_create(struct net *net, struct socket *sock, int protocol)
+{
+	struct sock *sk;
+
+	if (sock->type != SOCK_DGRAM)
+		return -ESOCKTNOSUPPORT;
+
+	sk = sk_alloc(net, PF_ISDN, GFP_KERNEL, &mISDN_proto);
+	if (!sk)
+		return -ENOMEM;
+
+	sock_init_data(sock, sk);
+
+	sock->ops = &data_sock_ops;
+	sock->state = SS_UNCONNECTED;
+	sock_reset_flag(sk, SOCK_ZAPPED);
+
+	sk->sk_protocol = protocol;
+	sk->sk_state    = MISDN_OPEN;
+	mISDN_sock_link(&data_sockets, sk);
+
+	return 0;
+}
+
+static int
+base_sock_release(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+
+	printk(KERN_DEBUG "%s(%p) sk=%p\n", __func__, sock, sk);
+	if (!sk)
+		return 0;
+
+	mISDN_sock_unlink(&base_sockets, sk);
+	sock_orphan(sk);
+	sock_put(sk);
+
+	return 0;
+}
+
+static int
+base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+	int 			err = 0, id;
+	struct mISDNdevice	*dev;
+	struct mISDNversion	ver;
+
+	switch (cmd) {
+	case IMGETVERSION:
+		ver.major = MISDN_MAJOR_VERSION;
+		ver.minor = MISDN_MINOR_VERSION;
+		ver.release = MISDN_RELEASE;
+		if (copy_to_user((void __user *)arg, &ver, sizeof(ver)))
+			err = -EFAULT;
+		break;
+	case IMGETCOUNT:
+		id = get_mdevice_count();
+		if (put_user(id, (int __user *)arg))
+			err = -EFAULT;
+		break;
+	case IMGETDEVINFO:
+		if (get_user(id, (int __user *)arg)) {
+			err = -EFAULT;
+			break;
+		}
+		dev = get_mdevice(id);
+		if (dev) {
+			struct mISDN_devinfo di;
+
+			di.id = dev->id;
+			di.Dprotocols = dev->Dprotocols;
+			di.Bprotocols = dev->Bprotocols | get_all_Bprotocols();
+			di.protocol = dev->D.protocol;
+			memcpy(di.channelmap, dev->channelmap,
+				MISDN_CHMAP_SIZE * 4);
+			di.nrbchan = dev->nrbchan;
+			strcpy(di.name, dev->name);
+			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
+				err = -EFAULT;
+		} else
+			err = -ENODEV;
+		break;
+	default:
+		err = -EINVAL;
+	}
+	return err;
+}
+
+static int
+base_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
+{
+	struct sockaddr_mISDN *maddr = (struct sockaddr_mISDN *) addr;
+	struct sock *sk = sock->sk;
+	int err = 0;
+
+	if (!maddr || maddr->family != AF_ISDN)
+		return -EINVAL;
+
+	lock_sock(sk);
+
+	if (_pms(sk)->dev) {
+		err = -EALREADY;
+		goto done;
+	}
+
+	_pms(sk)->dev = get_mdevice(maddr->dev);
+	if (!_pms(sk)->dev) {
+		err = -ENODEV;
+		goto done;
+	}
+	sk->sk_state = MISDN_BOUND;
+
+done:
+	release_sock(sk);
+	return err;
+}
+
+static const struct proto_ops base_sock_ops = {
+	.family		= PF_ISDN,
+	.owner		= THIS_MODULE,
+	.release	= base_sock_release,
+	.ioctl		= base_sock_ioctl,
+	.bind		= base_sock_bind,
+	.getname	= sock_no_getname,
+	.sendmsg	= sock_no_sendmsg,
+	.recvmsg	= sock_no_recvmsg,
+	.poll		= sock_no_poll,
+	.listen		= sock_no_listen,
+	.shutdown	= sock_no_shutdown,
+	.setsockopt	= sock_no_setsockopt,
+	.getsockopt	= sock_no_getsockopt,
+	.connect	= sock_no_connect,
+	.socketpair	= sock_no_socketpair,
+	.accept		= sock_no_accept,
+	.mmap		= sock_no_mmap
+};
+
+
+static int
+base_sock_create(struct net *net, struct socket *sock, int protocol)
+{
+	struct sock *sk;
+
+	if (sock->type != SOCK_RAW)
+		return -ESOCKTNOSUPPORT;
+
+	sk = sk_alloc(net, PF_ISDN, GFP_KERNEL, &mISDN_proto);
+	if (!sk)
+		return -ENOMEM;
+
+	sock_init_data(sock, sk);
+	sock->ops = &base_sock_ops;
+	sock->state = SS_UNCONNECTED;
+	sock_reset_flag(sk, SOCK_ZAPPED);
+	sk->sk_protocol = protocol;
+	sk->sk_state    = MISDN_OPEN;
+	mISDN_sock_link(&base_sockets, sk);
+
+	return 0;
+}
+
+static int
+mISDN_sock_create(struct net *net, struct socket *sock, int proto)
+{
+	int err = -EPROTONOSUPPORT;
+
+	switch	(proto) {
+	case ISDN_P_BASE:
+		err = base_sock_create(net, sock, proto);
+		break;
+	case ISDN_P_TE_S0:
+	case ISDN_P_NT_S0:
+	case ISDN_P_TE_E1:
+	case ISDN_P_NT_E1:
+	case ISDN_P_LAPD_TE:
+	case ISDN_P_LAPD_NT:
+	case ISDN_P_B_RAW:
+	case ISDN_P_B_HDLC:
+	case ISDN_P_B_X75SLP:
+	case ISDN_P_B_L2DTMF:
+	case ISDN_P_B_L2DSP:
+	case ISDN_P_B_L2DSPHDLC:
+		err = data_sock_create(net, sock, proto);
+		break;
+	default:
+		return err;
+	}
+
+	return err;
+}
+
+static struct
+net_proto_family mISDN_sock_family_ops = {
+	.owner  = THIS_MODULE,
+	.family = PF_ISDN,
+	.create = mISDN_sock_create,
+};
+
+int
+misdn_sock_init(u_int *deb)
+{
+	int err;
+
+	debug = deb;
+	err = sock_register(&mISDN_sock_family_ops);
+	if (err)
+		printk(KERN_ERR "%s: error(%d)\n", __func__, err);
+	return err;
+}
+
+void
+misdn_sock_cleanup(void)
+{
+	sock_unregister(PF_ISDN);
+}
+
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
new file mode 100644
index 00000000000..54cfddcc478
--- /dev/null
+++ b/drivers/isdn/mISDN/stack.c
@@ -0,0 +1,674 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/kthread.h>
+#include "core.h"
+
+static u_int	*debug;
+
+static inline void
+_queue_message(struct mISDNstack *st, struct sk_buff *skb)
+{
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+
+	if (*debug & DEBUG_QUEUE_FUNC)
+		printk(KERN_DEBUG "%s prim(%x) id(%x) %p\n",
+		    __func__, hh->prim, hh->id, skb);
+	skb_queue_tail(&st->msgq, skb);
+	if (likely(!test_bit(mISDN_STACK_STOPPED, &st->status))) {
+		test_and_set_bit(mISDN_STACK_WORK, &st->status);
+		wake_up_interruptible(&st->workq);
+	}
+}
+
+int
+mISDN_queue_message(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	_queue_message(ch->st, skb);
+	return 0;
+}
+
+static struct mISDNchannel *
+get_channel4id(struct mISDNstack *st, u_int id)
+{
+	struct mISDNchannel	*ch;
+
+	mutex_lock(&st->lmutex);
+	list_for_each_entry(ch, &st->layer2, list) {
+		if (id == ch->nr)
+			goto unlock;
+	}
+	ch = NULL;
+unlock:
+	mutex_unlock(&st->lmutex);
+	return ch;
+}
+
+static void
+send_socklist(struct mISDN_sock_list *sl, struct sk_buff *skb)
+{
+	struct hlist_node	*node;
+	struct sock		*sk;
+	struct sk_buff		*cskb = NULL;
+
+	read_lock(&sl->lock);
+	sk_for_each(sk, node, &sl->head) {
+		if (sk->sk_state != MISDN_BOUND)
+			continue;
+		if (!cskb)
+			cskb = skb_copy(skb, GFP_KERNEL);
+		if (!cskb) {
+			printk(KERN_WARNING "%s no skb\n", __func__);
+			break;
+		}
+		if (!sock_queue_rcv_skb(sk, cskb))
+			cskb = NULL;
+	}
+	read_unlock(&sl->lock);
+	if (cskb)
+		dev_kfree_skb(cskb);
+}
+
+static void
+send_layer2(struct mISDNstack *st, struct sk_buff *skb)
+{
+	struct sk_buff		*cskb;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	struct mISDNchannel	*ch;
+	int			ret;
+
+	if (!st)
+		return;
+	mutex_lock(&st->lmutex);
+	if ((hh->id & MISDN_ID_ADDR_MASK) == MISDN_ID_ANY) { /* L2 for all */
+		list_for_each_entry(ch, &st->layer2, list) {
+			if (list_is_last(&ch->list, &st->layer2)) {
+				cskb = skb;
+				skb = NULL;
+			} else {
+				cskb = skb_copy(skb, GFP_KERNEL);
+			}
+			if (cskb) {
+				ret = ch->send(ch, cskb);
+				if (ret) {
+					if (*debug & DEBUG_SEND_ERR)
+						printk(KERN_DEBUG
+						    "%s ch%d prim(%x) addr(%x)"
+						    " err %d\n",
+						    __func__, ch->nr,
+						    hh->prim, ch->addr, ret);
+					dev_kfree_skb(cskb);
+				}
+			} else {
+				printk(KERN_WARNING "%s ch%d addr %x no mem\n",
+				    __func__, ch->nr, ch->addr);
+				goto out;
+			}
+		}
+	} else {
+		list_for_each_entry(ch, &st->layer2, list) {
+			if ((hh->id & MISDN_ID_ADDR_MASK) == ch->addr) {
+				ret = ch->send(ch, skb);
+				if (!ret)
+					skb = NULL;
+				goto out;
+			}
+		}
+		ret = st->dev->teimgr->ctrl(st->dev->teimgr, CHECK_DATA, skb);
+		if (!ret)
+			skb = NULL;
+		else if (*debug & DEBUG_SEND_ERR)
+			printk(KERN_DEBUG
+			    "%s ch%d mgr prim(%x) addr(%x) err %d\n",
+			    __func__, ch->nr, hh->prim, ch->addr, ret);
+	}
+out:
+	mutex_unlock(&st->lmutex);
+	if (skb)
+		dev_kfree_skb(skb);
+}
+
+static inline int
+send_msg_to_layer(struct mISDNstack *st, struct sk_buff *skb)
+{
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	struct mISDNchannel	*ch;
+	int	lm;
+
+	lm = hh->prim & MISDN_LAYERMASK;
+	if (*debug & DEBUG_QUEUE_FUNC)
+		printk(KERN_DEBUG "%s prim(%x) id(%x) %p\n",
+		    __func__, hh->prim, hh->id, skb);
+	if (lm == 0x1) {
+		if (!hlist_empty(&st->l1sock.head)) {
+			__net_timestamp(skb);
+			send_socklist(&st->l1sock, skb);
+		}
+		return st->layer1->send(st->layer1, skb);
+	} else if (lm == 0x2) {
+		if (!hlist_empty(&st->l1sock.head))
+			send_socklist(&st->l1sock, skb);
+		send_layer2(st, skb);
+		return 0;
+	} else if (lm == 0x4) {
+		ch = get_channel4id(st, hh->id);
+		if (ch)
+			return ch->send(ch, skb);
+		else
+			printk(KERN_WARNING
+			    "%s: dev(%s) prim(%x) id(%x) no channel\n",
+			    __func__, st->dev->name, hh->prim, hh->id);
+	} else if (lm == 0x8) {
+		WARN_ON(lm == 0x8);
+		ch = get_channel4id(st, hh->id);
+		if (ch)
+			return ch->send(ch, skb);
+		else
+			printk(KERN_WARNING
+			    "%s: dev(%s) prim(%x) id(%x) no channel\n",
+			    __func__, st->dev->name, hh->prim, hh->id);
+	} else {
+		/* broadcast not handled yet */
+		printk(KERN_WARNING "%s: dev(%s) prim %x not delivered\n",
+		    __func__, st->dev->name, hh->prim);
+	}
+	return -ESRCH;
+}
+
+static void
+do_clear_stack(struct mISDNstack *st)
+{
+}
+
+static int
+mISDNStackd(void *data)
+{
+	struct mISDNstack *st = data;
+	int err = 0;
+
+#ifdef CONFIG_SMP
+	lock_kernel();
+#endif
+	sigfillset(&current->blocked);
+#ifdef CONFIG_SMP
+	unlock_kernel();
+#endif
+	if (*debug & DEBUG_MSG_THREAD)
+		printk(KERN_DEBUG "mISDNStackd %s started\n", st->dev->name);
+
+	if (st->notify != NULL) {
+		complete(st->notify);
+		st->notify = NULL;
+	}
+
+	for (;;) {
+		struct sk_buff	*skb;
+
+		if (unlikely(test_bit(mISDN_STACK_STOPPED, &st->status))) {
+			test_and_clear_bit(mISDN_STACK_WORK, &st->status);
+			test_and_clear_bit(mISDN_STACK_RUNNING, &st->status);
+		} else
+			test_and_set_bit(mISDN_STACK_RUNNING, &st->status);
+		while (test_bit(mISDN_STACK_WORK, &st->status)) {
+			skb = skb_dequeue(&st->msgq);
+			if (!skb) {
+				test_and_clear_bit(mISDN_STACK_WORK,
+					&st->status);
+				/* test if a race happens */
+				skb = skb_dequeue(&st->msgq);
+				if (!skb)
+					continue;
+				test_and_set_bit(mISDN_STACK_WORK,
+				    &st->status);
+			}
+#ifdef MISDN_MSG_STATS
+			st->msg_cnt++;
+#endif
+			err = send_msg_to_layer(st, skb);
+			if (unlikely(err)) {
+				if (*debug & DEBUG_SEND_ERR)
+					printk(KERN_DEBUG
+					    "%s: %s prim(%x) id(%x) "
+					    "send call(%d)\n",
+					    __func__, st->dev->name,
+					    mISDN_HEAD_PRIM(skb),
+					    mISDN_HEAD_ID(skb), err);
+				dev_kfree_skb(skb);
+				continue;
+			}
+			if (unlikely(test_bit(mISDN_STACK_STOPPED,
+			    &st->status))) {
+				test_and_clear_bit(mISDN_STACK_WORK,
+				    &st->status);
+				test_and_clear_bit(mISDN_STACK_RUNNING,
+				    &st->status);
+				break;
+			}
+		}
+		if (test_bit(mISDN_STACK_CLEARING, &st->status)) {
+			test_and_set_bit(mISDN_STACK_STOPPED, &st->status);
+			test_and_clear_bit(mISDN_STACK_RUNNING, &st->status);
+			do_clear_stack(st);
+			test_and_clear_bit(mISDN_STACK_CLEARING, &st->status);
+			test_and_set_bit(mISDN_STACK_RESTART, &st->status);
+		}
+		if (test_and_clear_bit(mISDN_STACK_RESTART, &st->status)) {
+			test_and_clear_bit(mISDN_STACK_STOPPED, &st->status);
+			test_and_set_bit(mISDN_STACK_RUNNING, &st->status);
+			if (!skb_queue_empty(&st->msgq))
+				test_and_set_bit(mISDN_STACK_WORK,
+				    &st->status);
+		}
+		if (test_bit(mISDN_STACK_ABORT, &st->status))
+			break;
+		if (st->notify != NULL) {
+			complete(st->notify);
+			st->notify = NULL;
+		}
+#ifdef MISDN_MSG_STATS
+		st->sleep_cnt++;
+#endif
+		test_and_clear_bit(mISDN_STACK_ACTIVE, &st->status);
+		wait_event_interruptible(st->workq, (st->status &
+		    mISDN_STACK_ACTION_MASK));
+		if (*debug & DEBUG_MSG_THREAD)
+			printk(KERN_DEBUG "%s: %s wake status %08lx\n",
+			    __func__, st->dev->name, st->status);
+		test_and_set_bit(mISDN_STACK_ACTIVE, &st->status);
+
+		test_and_clear_bit(mISDN_STACK_WAKEUP, &st->status);
+
+		if (test_bit(mISDN_STACK_STOPPED, &st->status)) {
+			test_and_clear_bit(mISDN_STACK_RUNNING, &st->status);
+#ifdef MISDN_MSG_STATS
+			st->stopped_cnt++;
+#endif
+		}
+	}
+#ifdef MISDN_MSG_STATS
+	printk(KERN_DEBUG "mISDNStackd daemon for %s proceed %d "
+	    "msg %d sleep %d stopped\n",
+	    st->dev->name, st->msg_cnt, st->sleep_cnt, st->stopped_cnt);
+	printk(KERN_DEBUG
+	    "mISDNStackd daemon for %s utime(%ld) stime(%ld)\n",
+	    st->dev->name, st->thread->utime, st->thread->stime);
+	printk(KERN_DEBUG
+	    "mISDNStackd daemon for %s nvcsw(%ld) nivcsw(%ld)\n",
+	    st->dev->name, st->thread->nvcsw, st->thread->nivcsw);
+	printk(KERN_DEBUG "mISDNStackd daemon for %s killed now\n",
+	    st->dev->name);
+#endif
+	test_and_set_bit(mISDN_STACK_KILLED, &st->status);
+	test_and_clear_bit(mISDN_STACK_RUNNING, &st->status);
+	test_and_clear_bit(mISDN_STACK_ACTIVE, &st->status);
+	test_and_clear_bit(mISDN_STACK_ABORT, &st->status);
+	skb_queue_purge(&st->msgq);
+	st->thread = NULL;
+	if (st->notify != NULL) {
+		complete(st->notify);
+		st->notify = NULL;
+	}
+	return 0;
+}
+
+static int
+l1_receive(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	if (!ch->st)
+		return -ENODEV;
+	__net_timestamp(skb);
+	_queue_message(ch->st, skb);
+	return 0;
+}
+
+void
+set_channel_address(struct mISDNchannel *ch, u_int sapi, u_int tei)
+{
+	ch->addr = sapi | (tei << 8);
+}
+
+void
+__add_layer2(struct mISDNchannel *ch, struct mISDNstack *st)
+{
+	list_add_tail(&ch->list, &st->layer2);
+}
+
+void
+add_layer2(struct mISDNchannel *ch, struct mISDNstack *st)
+{
+	mutex_lock(&st->lmutex);
+	__add_layer2(ch, st);
+	mutex_unlock(&st->lmutex);
+}
+
+static int
+st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	if (!ch->st || ch->st->layer1)
+		return -EINVAL;
+	return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg);
+}
+
+int
+create_stack(struct mISDNdevice *dev)
+{
+	struct mISDNstack	*newst;
+	int			err;
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	newst = kzalloc(sizeof(struct mISDNstack), GFP_KERNEL);
+	if (!newst) {
+		printk(KERN_ERR "kmalloc mISDN_stack failed\n");
+		return -ENOMEM;
+	}
+	newst->dev = dev;
+	INIT_LIST_HEAD(&newst->layer2);
+	INIT_HLIST_HEAD(&newst->l1sock.head);
+	rwlock_init(&newst->l1sock.lock);
+	init_waitqueue_head(&newst->workq);
+	skb_queue_head_init(&newst->msgq);
+	mutex_init(&newst->lmutex);
+	dev->D.st = newst;
+	err = create_teimanager(dev);
+	if (err) {
+		printk(KERN_ERR "kmalloc teimanager failed\n");
+		kfree(newst);
+		return err;
+	}
+	dev->teimgr->peer = &newst->own;
+	dev->teimgr->recv = mISDN_queue_message;
+	dev->teimgr->st = newst;
+	newst->layer1 = &dev->D;
+	dev->D.recv = l1_receive;
+	dev->D.peer = &newst->own;
+	newst->own.st = newst;
+	newst->own.ctrl = st_own_ctrl;
+	newst->own.send = mISDN_queue_message;
+	newst->own.recv = mISDN_queue_message;
+	if (*debug & DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: st(%s)\n", __func__, newst->dev->name);
+	newst->notify = &done;
+	newst->thread = kthread_run(mISDNStackd, (void *)newst, "mISDN_%s",
+		newst->dev->name);
+	if (IS_ERR(newst->thread)) {
+		err = PTR_ERR(newst->thread);
+		printk(KERN_ERR
+			"mISDN:cannot create kernel thread for %s (%d)\n",
+			newst->dev->name, err);
+		delete_teimanager(dev->teimgr);
+		kfree(newst);
+	} else
+		wait_for_completion(&done);
+	return err;
+}
+
+int
+connect_layer1(struct mISDNdevice *dev, struct mISDNchannel *ch,
+		u_int protocol, struct sockaddr_mISDN *adr)
+{
+	struct mISDN_sock	*msk = container_of(ch, struct mISDN_sock, ch);
+	struct channel_req	rq;
+	int			err;
+
+
+	if (*debug &  DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n",
+			__func__, dev->name, protocol, adr->dev, adr->channel,
+			 adr->sapi, adr->tei);
+	switch (protocol) {
+	case ISDN_P_NT_S0:
+	case ISDN_P_NT_E1:
+	case ISDN_P_TE_S0:
+	case ISDN_P_TE_E1:
+#ifdef PROTOCOL_CHECK
+		/* this should be enhanced */
+		if (!list_empty(&dev->D.st->layer2)
+			&& dev->D.protocol != protocol)
+			return -EBUSY;
+		if (!hlist_empty(&dev->D.st->l1sock.head)
+			&& dev->D.protocol != protocol)
+			return -EBUSY;
+#endif
+		ch->recv = mISDN_queue_message;
+		ch->peer = &dev->D.st->own;
+		ch->st = dev->D.st;
+		rq.protocol = protocol;
+		rq.adr.channel = 0;
+		err = dev->D.ctrl(&dev->D, OPEN_CHANNEL, &rq);
+		printk(KERN_DEBUG "%s: ret 1 %d\n", __func__, err);
+		if (err)
+			return err;
+		write_lock_bh(&dev->D.st->l1sock.lock);
+		sk_add_node(&msk->sk, &dev->D.st->l1sock.head);
+		write_unlock_bh(&dev->D.st->l1sock.lock);
+		break;
+	default:
+		return -ENOPROTOOPT;
+	}
+	return 0;
+}
+
+int
+connect_Bstack(struct mISDNdevice *dev, struct mISDNchannel *ch,
+    u_int protocol, struct sockaddr_mISDN *adr)
+{
+	struct channel_req	rq, rq2;
+	int			pmask, err;
+	struct Bprotocol	*bp;
+
+	if (*debug &  DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n",
+			__func__, dev->name, protocol,
+			adr->dev, adr->channel, adr->sapi,
+			adr->tei);
+	ch->st = dev->D.st;
+	pmask = 1 << (protocol & ISDN_P_B_MASK);
+	if (pmask & dev->Bprotocols) {
+		rq.protocol = protocol;
+		rq.adr = *adr;
+		err = dev->D.ctrl(&dev->D, OPEN_CHANNEL, &rq);
+		if (err)
+			return err;
+		ch->recv = rq.ch->send;
+		ch->peer = rq.ch;
+		rq.ch->recv = ch->send;
+		rq.ch->peer = ch;
+		rq.ch->st = dev->D.st;
+	} else {
+		bp = get_Bprotocol4mask(pmask);
+		if (!bp)
+			return -ENOPROTOOPT;
+		rq2.protocol = protocol;
+		rq2.adr = *adr;
+		rq2.ch = ch;
+		err = bp->create(&rq2);
+		if (err)
+			return err;
+		ch->recv = rq2.ch->send;
+		ch->peer = rq2.ch;
+		rq2.ch->st = dev->D.st;
+		rq.protocol = rq2.protocol;
+		rq.adr = *adr;
+		err = dev->D.ctrl(&dev->D, OPEN_CHANNEL, &rq);
+		if (err) {
+			rq2.ch->ctrl(rq2.ch, CLOSE_CHANNEL, NULL);
+			return err;
+		}
+		rq2.ch->recv = rq.ch->send;
+		rq2.ch->peer = rq.ch;
+		rq.ch->recv = rq2.ch->send;
+		rq.ch->peer = rq2.ch;
+		rq.ch->st = dev->D.st;
+	}
+	ch->protocol = protocol;
+	ch->nr = rq.ch->nr;
+	return 0;
+}
+
+int
+create_l2entity(struct mISDNdevice *dev, struct mISDNchannel *ch,
+    u_int protocol, struct sockaddr_mISDN *adr)
+{
+	struct channel_req	rq;
+	int			err;
+
+	if (*debug &  DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n",
+			__func__, dev->name, protocol,
+			adr->dev, adr->channel, adr->sapi,
+			adr->tei);
+	rq.protocol = ISDN_P_TE_S0;
+	if (dev->Dprotocols & (1 << ISDN_P_TE_E1))
+		rq.protocol = ISDN_P_TE_E1;
+	switch (protocol) {
+	case ISDN_P_LAPD_NT:
+		rq.protocol = ISDN_P_NT_S0;
+		if (dev->Dprotocols & (1 << ISDN_P_NT_E1))
+			rq.protocol = ISDN_P_NT_E1;
+	case ISDN_P_LAPD_TE:
+#ifdef PROTOCOL_CHECK
+		/* this should be enhanced */
+		if (!list_empty(&dev->D.st->layer2)
+			&& dev->D.protocol != protocol)
+			return -EBUSY;
+		if (!hlist_empty(&dev->D.st->l1sock.head)
+			&& dev->D.protocol != protocol)
+			return -EBUSY;
+#endif
+		ch->recv = mISDN_queue_message;
+		ch->peer = &dev->D.st->own;
+		ch->st = dev->D.st;
+		rq.adr.channel = 0;
+		err = dev->D.ctrl(&dev->D, OPEN_CHANNEL, &rq);
+		printk(KERN_DEBUG "%s: ret 1 %d\n", __func__, err);
+		if (err)
+			break;
+		rq.protocol = protocol;
+		rq.adr = *adr;
+		rq.ch = ch;
+		err = dev->teimgr->ctrl(dev->teimgr, OPEN_CHANNEL, &rq);
+		printk(KERN_DEBUG "%s: ret 2 %d\n", __func__, err);
+		if (!err) {
+			if ((protocol == ISDN_P_LAPD_NT) && !rq.ch)
+				break;
+			add_layer2(rq.ch, dev->D.st);
+			rq.ch->recv = mISDN_queue_message;
+			rq.ch->peer = &dev->D.st->own;
+			rq.ch->ctrl(rq.ch, OPEN_CHANNEL, NULL); /* can't fail */
+		}
+		break;
+	default:
+		err = -EPROTONOSUPPORT;
+	}
+	return err;
+}
+
+void
+delete_channel(struct mISDNchannel *ch)
+{
+	struct mISDN_sock	*msk = container_of(ch, struct mISDN_sock, ch);
+	struct mISDNchannel	*pch;
+
+	if (!ch->st) {
+		printk(KERN_WARNING "%s: no stack\n", __func__);
+		return;
+	}
+	if (*debug & DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: st(%s) protocol(%x)\n", __func__,
+		    ch->st->dev->name, ch->protocol);
+	if (ch->protocol >= ISDN_P_B_START) {
+		if (ch->peer) {
+			ch->peer->ctrl(ch->peer, CLOSE_CHANNEL, NULL);
+			ch->peer = NULL;
+		}
+		return;
+	}
+	switch (ch->protocol) {
+	case ISDN_P_NT_S0:
+	case ISDN_P_TE_S0:
+	case ISDN_P_NT_E1:
+	case ISDN_P_TE_E1:
+		write_lock_bh(&ch->st->l1sock.lock);
+		sk_del_node_init(&msk->sk);
+		write_unlock_bh(&ch->st->l1sock.lock);
+		ch->st->dev->D.ctrl(&ch->st->dev->D, CLOSE_CHANNEL, NULL);
+		break;
+	case ISDN_P_LAPD_TE:
+		pch = get_channel4id(ch->st, ch->nr);
+		if (pch) {
+			mutex_lock(&ch->st->lmutex);
+			list_del(&pch->list);
+			mutex_unlock(&ch->st->lmutex);
+			pch->ctrl(pch, CLOSE_CHANNEL, NULL);
+			pch = ch->st->dev->teimgr;
+			pch->ctrl(pch, CLOSE_CHANNEL, NULL);
+		} else
+			printk(KERN_WARNING "%s: no l2 channel\n",
+			    __func__);
+		break;
+	case ISDN_P_LAPD_NT:
+		pch = ch->st->dev->teimgr;
+		if (pch) {
+			pch->ctrl(pch, CLOSE_CHANNEL, NULL);
+		} else
+			printk(KERN_WARNING "%s: no l2 channel\n",
+			    __func__);
+		break;
+	default:
+		break;
+	}
+	return;
+}
+
+void
+delete_stack(struct mISDNdevice *dev)
+{
+	struct mISDNstack	*st = dev->D.st;
+	DECLARE_COMPLETION_ONSTACK(done);
+
+	if (*debug & DEBUG_CORE_FUNC)
+		printk(KERN_DEBUG "%s: st(%s)\n", __func__,
+		    st->dev->name);
+	if (dev->teimgr)
+		delete_teimanager(dev->teimgr);
+	if (st->thread) {
+		if (st->notify) {
+			printk(KERN_WARNING "%s: notifier in use\n",
+			    __func__);
+				complete(st->notify);
+		}
+		st->notify = &done;
+		test_and_set_bit(mISDN_STACK_ABORT, &st->status);
+		test_and_set_bit(mISDN_STACK_WAKEUP, &st->status);
+		wake_up_interruptible(&st->workq);
+		wait_for_completion(&done);
+	}
+	if (!list_empty(&st->layer2))
+		printk(KERN_WARNING "%s: layer2 list not empty\n",
+		    __func__);
+	if (!hlist_empty(&st->l1sock.head))
+		printk(KERN_WARNING "%s: layer1 list not empty\n",
+		    __func__);
+	kfree(st);
+}
+
+void
+mISDN_initstack(u_int *dp)
+{
+	debug = dp;
+}
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
new file mode 100644
index 00000000000..56a76a0ffdd
--- /dev/null
+++ b/drivers/isdn/mISDN/tei.c
@@ -0,0 +1,1340 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include "layer2.h"
+#include <linux/random.h>
+#include "core.h"
+
+#define ID_REQUEST	1
+#define ID_ASSIGNED	2
+#define ID_DENIED	3
+#define ID_CHK_REQ	4
+#define ID_CHK_RES	5
+#define ID_REMOVE	6
+#define ID_VERIFY	7
+
+#define TEI_ENTITY_ID	0xf
+
+#define MGR_PH_ACTIVE	16
+#define MGR_PH_NOTREADY	17
+
+#define DATIMER_VAL	10000
+
+static 	u_int	*debug;
+
+static struct Fsm deactfsm = {NULL, 0, 0, NULL, NULL};
+static struct Fsm teifsmu = {NULL, 0, 0, NULL, NULL};
+static struct Fsm teifsmn = {NULL, 0, 0, NULL, NULL};
+
+enum {
+	ST_L1_DEACT,
+	ST_L1_DEACT_PENDING,
+	ST_L1_ACTIV,
+};
+#define DEACT_STATE_COUNT (ST_L1_ACTIV+1)
+
+static char *strDeactState[] =
+{
+	"ST_L1_DEACT",
+	"ST_L1_DEACT_PENDING",
+	"ST_L1_ACTIV",
+};
+
+enum {
+	EV_ACTIVATE,
+	EV_ACTIVATE_IND,
+	EV_DEACTIVATE,
+	EV_DEACTIVATE_IND,
+	EV_UI,
+	EV_DATIMER,
+};
+
+#define DEACT_EVENT_COUNT (EV_DATIMER+1)
+
+static char *strDeactEvent[] =
+{
+	"EV_ACTIVATE",
+	"EV_ACTIVATE_IND",
+	"EV_DEACTIVATE",
+	"EV_DEACTIVATE_IND",
+	"EV_UI",
+	"EV_DATIMER",
+};
+
+static void
+da_debug(struct FsmInst *fi, char *fmt, ...)
+{
+	struct manager	*mgr = fi->userdata;
+	va_list va;
+
+	if (!(*debug & DEBUG_L2_TEIFSM))
+		return;
+	va_start(va, fmt);
+	printk(KERN_DEBUG "mgr(%d): ", mgr->ch.st->dev->id);
+	vprintk(fmt, va);
+	printk("\n");
+	va_end(va);
+}
+
+static void
+da_activate(struct FsmInst *fi, int event, void *arg)
+{
+	struct manager	*mgr = fi->userdata;
+
+	if (fi->state == ST_L1_DEACT_PENDING)
+		mISDN_FsmDelTimer(&mgr->datimer, 1);
+	mISDN_FsmChangeState(fi, ST_L1_ACTIV);
+}
+
+static void
+da_deactivate_ind(struct FsmInst *fi, int event, void *arg)
+{
+	mISDN_FsmChangeState(fi, ST_L1_DEACT);
+}
+
+static void
+da_deactivate(struct FsmInst *fi, int event, void *arg)
+{
+	struct manager	*mgr = fi->userdata;
+	struct layer2	*l2;
+	u_long		flags;
+
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if (l2->l2m.state > ST_L2_4) {
+			/* have still activ TEI */
+			read_unlock_irqrestore(&mgr->lock, flags);
+			return;
+		}
+	}
+	read_unlock_irqrestore(&mgr->lock, flags);
+	/* All TEI are inactiv */
+	mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER, NULL, 1);
+	mISDN_FsmChangeState(fi, ST_L1_DEACT_PENDING);
+}
+
+static void
+da_ui(struct FsmInst *fi, int event, void *arg)
+{
+	struct manager	*mgr = fi->userdata;
+
+	/* restart da timer */
+	mISDN_FsmDelTimer(&mgr->datimer, 2);
+	mISDN_FsmAddTimer(&mgr->datimer, DATIMER_VAL, EV_DATIMER, NULL, 2);
+
+}
+
+static void
+da_timer(struct FsmInst *fi, int event, void *arg)
+{
+	struct manager	*mgr = fi->userdata;
+	struct layer2	*l2;
+	u_long		flags;
+
+	/* check again */
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if (l2->l2m.state > ST_L2_4) {
+			/* have still activ TEI */
+			read_unlock_irqrestore(&mgr->lock, flags);
+			mISDN_FsmChangeState(fi, ST_L1_ACTIV);
+			return;
+		}
+	}
+	read_unlock_irqrestore(&mgr->lock, flags);
+	/* All TEI are inactiv */
+	mISDN_FsmChangeState(fi, ST_L1_DEACT);
+	_queue_data(&mgr->ch, PH_DEACTIVATE_REQ, MISDN_ID_ANY, 0, NULL,
+	    GFP_ATOMIC);
+}
+
+static struct FsmNode DeactFnList[] =
+{
+	{ST_L1_DEACT, EV_ACTIVATE_IND, da_activate},
+	{ST_L1_ACTIV, EV_DEACTIVATE_IND, da_deactivate_ind},
+	{ST_L1_ACTIV, EV_DEACTIVATE, da_deactivate},
+	{ST_L1_DEACT_PENDING, EV_ACTIVATE, da_activate},
+	{ST_L1_DEACT_PENDING, EV_UI, da_ui},
+	{ST_L1_DEACT_PENDING, EV_DATIMER, da_timer},
+};
+
+enum {
+	ST_TEI_NOP,
+	ST_TEI_IDREQ,
+	ST_TEI_IDVERIFY,
+};
+
+#define TEI_STATE_COUNT (ST_TEI_IDVERIFY+1)
+
+static char *strTeiState[] =
+{
+	"ST_TEI_NOP",
+	"ST_TEI_IDREQ",
+	"ST_TEI_IDVERIFY",
+};
+
+enum {
+	EV_IDREQ,
+	EV_ASSIGN,
+	EV_ASSIGN_REQ,
+	EV_DENIED,
+	EV_CHKREQ,
+	EV_CHKRESP,
+	EV_REMOVE,
+	EV_VERIFY,
+	EV_TIMER,
+};
+
+#define TEI_EVENT_COUNT (EV_TIMER+1)
+
+static char *strTeiEvent[] =
+{
+	"EV_IDREQ",
+	"EV_ASSIGN",
+	"EV_ASSIGN_REQ",
+	"EV_DENIED",
+	"EV_CHKREQ",
+	"EV_CHKRESP",
+	"EV_REMOVE",
+	"EV_VERIFY",
+	"EV_TIMER",
+};
+
+static void
+tei_debug(struct FsmInst *fi, char *fmt, ...)
+{
+	struct teimgr	*tm = fi->userdata;
+	va_list va;
+
+	if (!(*debug & DEBUG_L2_TEIFSM))
+		return;
+	va_start(va, fmt);
+	printk(KERN_DEBUG "tei(%d): ", tm->l2->tei);
+	vprintk(fmt, va);
+	printk("\n");
+	va_end(va);
+}
+
+
+
+static int
+get_free_id(struct manager *mgr)
+{
+	u64		ids = 0;
+	int		i;
+	struct layer2	*l2;
+
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if (l2->ch.nr > 63) {
+			printk(KERN_WARNING
+			    "%s: more as 63 layer2 for one device\n",
+			    __func__);
+			return -EBUSY;
+		}
+		test_and_set_bit(l2->ch.nr, (u_long *)&ids);
+	}
+	for (i = 1; i < 64; i++)
+		if (!test_bit(i, (u_long *)&ids))
+			return i;
+	printk(KERN_WARNING "%s: more as 63 layer2 for one device\n",
+	    __func__);
+	return -EBUSY;
+}
+
+static int
+get_free_tei(struct manager *mgr)
+{
+	u64		ids = 0;
+	int		i;
+	struct layer2	*l2;
+
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if (l2->ch.nr == 0)
+			continue;
+		if ((l2->ch.addr & 0xff) != 0)
+			continue;
+		i = l2->ch.addr >> 8;
+		if (i < 64)
+			continue;
+		i -= 64;
+
+		test_and_set_bit(i, (u_long *)&ids);
+	}
+	for (i = 0; i < 64; i++)
+		if (!test_bit(i, (u_long *)&ids))
+			return i + 64;
+	printk(KERN_WARNING "%s: more as 63 dynamic tei for one device\n",
+	    __func__);
+	return -1;
+}
+
+static void
+teiup_create(struct manager *mgr, u_int prim, int len, void *arg)
+{
+	struct sk_buff	*skb;
+	struct mISDNhead *hh;
+	int		err;
+
+	skb = mI_alloc_skb(len, GFP_ATOMIC);
+	if (!skb)
+		return;
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = (mgr->ch.nr << 16) | mgr->ch.addr;
+	if (len)
+		memcpy(skb_put(skb, len), arg, len);
+	err = mgr->up->send(mgr->up, skb);
+	if (err) {
+		printk(KERN_WARNING "%s: err=%d\n", __func__, err);
+		dev_kfree_skb(skb);
+	}
+}
+
+static u_int
+new_id(struct manager *mgr)
+{
+	u_int	id;
+
+	id = mgr->nextid++;
+	if (id == 0x7fff)
+		mgr->nextid = 1;
+	id <<= 16;
+	id |= GROUP_TEI << 8;
+	id |= TEI_SAPI;
+	return id;
+}
+
+static void
+do_send(struct manager *mgr)
+{
+	if (!test_bit(MGR_PH_ACTIVE, &mgr->options))
+		return;
+
+	if (!test_and_set_bit(MGR_PH_NOTREADY, &mgr->options)) {
+		struct sk_buff	*skb = skb_dequeue(&mgr->sendq);
+
+		if (!skb) {
+			test_and_clear_bit(MGR_PH_NOTREADY, &mgr->options);
+			return;
+		}
+		mgr->lastid = mISDN_HEAD_ID(skb);
+		mISDN_FsmEvent(&mgr->deact, EV_UI, NULL);
+		if (mgr->ch.recv(mgr->ch.peer, skb)) {
+			dev_kfree_skb(skb);
+			test_and_clear_bit(MGR_PH_NOTREADY, &mgr->options);
+			mgr->lastid = MISDN_ID_NONE;
+		}
+	}
+}
+
+static void
+do_ack(struct manager *mgr, u_int id)
+{
+	if (test_bit(MGR_PH_NOTREADY, &mgr->options)) {
+		if (id == mgr->lastid) {
+			if (test_bit(MGR_PH_ACTIVE, &mgr->options)) {
+				struct sk_buff	*skb;
+
+				skb = skb_dequeue(&mgr->sendq);
+				if (skb) {
+					mgr->lastid = mISDN_HEAD_ID(skb);
+					if (!mgr->ch.recv(mgr->ch.peer, skb))
+						return;
+					dev_kfree_skb(skb);
+				}
+			}
+			mgr->lastid = MISDN_ID_NONE;
+			test_and_clear_bit(MGR_PH_NOTREADY, &mgr->options);
+		}
+	}
+}
+
+static void
+mgr_send_down(struct manager *mgr, struct sk_buff *skb)
+{
+	skb_queue_tail(&mgr->sendq, skb);
+	if (!test_bit(MGR_PH_ACTIVE, &mgr->options)) {
+		_queue_data(&mgr->ch, PH_ACTIVATE_REQ, MISDN_ID_ANY, 0,
+		    NULL, GFP_KERNEL);
+	} else {
+		do_send(mgr);
+	}
+}
+
+static int
+dl_unit_data(struct manager *mgr, struct sk_buff *skb)
+{
+	if (!test_bit(MGR_OPT_NETWORK, &mgr->options)) /* only net send UI */
+		return -EINVAL;
+	if (!test_bit(MGR_PH_ACTIVE, &mgr->options))
+		_queue_data(&mgr->ch, PH_ACTIVATE_REQ, MISDN_ID_ANY, 0,
+		    NULL, GFP_KERNEL);
+	skb_push(skb, 3);
+	skb->data[0] = 0x02; /* SAPI 0 C/R = 1 */
+	skb->data[1] = 0xff; /* TEI 127 */
+	skb->data[2] = UI;   /* UI frame */
+	mISDN_HEAD_PRIM(skb) = PH_DATA_REQ;
+	mISDN_HEAD_ID(skb) = new_id(mgr);
+	skb_queue_tail(&mgr->sendq, skb);
+	do_send(mgr);
+	return 0;
+}
+
+unsigned int
+random_ri(void)
+{
+	u16 x;
+
+	get_random_bytes(&x, sizeof(x));
+	return x;
+}
+
+static struct layer2 *
+findtei(struct manager *mgr, int tei)
+{
+	struct layer2	*l2;
+	u_long		flags;
+
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if ((l2->sapi == 0) && (l2->tei > 0) &&
+		    (l2->tei != GROUP_TEI) && (l2->tei == tei))
+			goto done;
+	}
+	l2 = NULL;
+done:
+	read_unlock_irqrestore(&mgr->lock, flags);
+	return l2;
+}
+
+static void
+put_tei_msg(struct manager *mgr, u_char m_id, unsigned int ri, u_char tei)
+{
+	struct sk_buff *skb;
+	u_char bp[8];
+
+	bp[0] = (TEI_SAPI << 2);
+	if (test_bit(MGR_OPT_NETWORK, &mgr->options))
+		bp[0] |= 2; /* CR:=1 for net command */
+	bp[1] = (GROUP_TEI << 1) | 0x1;
+	bp[2] = UI;
+	bp[3] = TEI_ENTITY_ID;
+	bp[4] = ri >> 8;
+	bp[5] = ri & 0xff;
+	bp[6] = m_id;
+	bp[7] = (tei << 1) | 1;
+	skb = _alloc_mISDN_skb(PH_DATA_REQ, new_id(mgr),
+	    8, bp, GFP_ATOMIC);
+	if (!skb) {
+		printk(KERN_WARNING "%s: no skb for tei msg\n", __func__);
+		return;
+	}
+	mgr_send_down(mgr, skb);
+}
+
+static void
+tei_id_request(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (tm->l2->tei != GROUP_TEI) {
+		tm->tei_m.printdebug(&tm->tei_m,
+			"assign request for allready assigned tei %d",
+			tm->l2->tei);
+		return;
+	}
+	tm->ri = random_ri();
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(&tm->tei_m,
+			"assign request ri %d", tm->ri);
+	put_tei_msg(tm->mgr, ID_REQUEST, tm->ri, GROUP_TEI);
+	mISDN_FsmChangeState(fi, ST_TEI_IDREQ);
+	mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 1);
+	tm->nval = 3;
+}
+
+static void
+tei_id_assign(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr	*tm = fi->userdata;
+	struct layer2	*l2;
+	u_char *dp = arg;
+	int ri, tei;
+
+	ri = ((unsigned int) *dp++ << 8);
+	ri += *dp++;
+	dp++;
+	tei = *dp >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity assign ri %d tei %d",
+			ri, tei);
+	l2 = findtei(tm->mgr, tei);
+	if (l2) {	/* same tei is in use */
+		if (ri != l2->tm->ri) {
+			tm->tei_m.printdebug(fi,
+				"possible duplicate assignment tei %d", tei);
+			tei_l2(l2, MDL_ERROR_RSP, 0);
+		}
+	} else if (ri == tm->ri) {
+		mISDN_FsmDelTimer(&tm->timer, 1);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+		tei_l2(tm->l2, MDL_ASSIGN_REQ, tei);
+	}
+}
+
+static void
+tei_id_test_dup(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr	*tm = fi->userdata;
+	struct layer2	*l2;
+	u_char *dp = arg;
+	int tei, ri;
+
+	ri = ((unsigned int) *dp++ << 8);
+	ri += *dp++;
+	dp++;
+	tei = *dp >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "foreign identity assign ri %d tei %d",
+			ri, tei);
+	l2 = findtei(tm->mgr, tei);
+	if (l2) {	/* same tei is in use */
+		if (ri != l2->tm->ri) {	/* and it wasn't our request */
+			tm->tei_m.printdebug(fi,
+				"possible duplicate assignment tei %d", tei);
+			mISDN_FsmEvent(&l2->tm->tei_m, EV_VERIFY, NULL);
+		}
+	}
+}
+
+static void
+tei_id_denied(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int ri, tei;
+
+	ri = ((unsigned int) *dp++ << 8);
+	ri += *dp++;
+	dp++;
+	tei = *dp >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity denied ri %d tei %d",
+			ri, tei);
+}
+
+static void
+tei_id_chk_req(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int tei;
+
+	tei = *(dp+3) >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity check req tei %d", tei);
+	if ((tm->l2->tei != GROUP_TEI) && ((tei == GROUP_TEI) ||
+	    (tei == tm->l2->tei))) {
+		mISDN_FsmDelTimer(&tm->timer, 4);
+		mISDN_FsmChangeState(&tm->tei_m, ST_TEI_NOP);
+		put_tei_msg(tm->mgr, ID_CHK_RES, random_ri(), tm->l2->tei);
+	}
+}
+
+static void
+tei_id_remove(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int tei;
+
+	tei = *(dp+3) >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity remove tei %d", tei);
+	if ((tm->l2->tei != GROUP_TEI) &&
+	    ((tei == GROUP_TEI) || (tei == tm->l2->tei))) {
+		mISDN_FsmDelTimer(&tm->timer, 5);
+		mISDN_FsmChangeState(&tm->tei_m, ST_TEI_NOP);
+		tei_l2(tm->l2, MDL_REMOVE_REQ, 0);
+	}
+}
+
+static void
+tei_id_verify(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "id verify request for tei %d",
+			tm->l2->tei);
+	put_tei_msg(tm->mgr, ID_VERIFY, 0, tm->l2->tei);
+	mISDN_FsmChangeState(&tm->tei_m, ST_TEI_IDVERIFY);
+	mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 2);
+	tm->nval = 2;
+}
+
+static void
+tei_id_req_tout(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (--tm->nval) {
+		tm->ri = random_ri();
+		if (*debug & DEBUG_L2_TEI)
+			tm->tei_m.printdebug(fi, "assign req(%d) ri %d",
+				4 - tm->nval, tm->ri);
+		put_tei_msg(tm->mgr, ID_REQUEST, tm->ri, GROUP_TEI);
+		mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 3);
+	} else {
+		tm->tei_m.printdebug(fi, "assign req failed");
+		tei_l2(tm->l2, MDL_ERROR_RSP, 0);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+	}
+}
+
+static void
+tei_id_ver_tout(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (--tm->nval) {
+		if (*debug & DEBUG_L2_TEI)
+			tm->tei_m.printdebug(fi,
+				"id verify req(%d) for tei %d",
+				3 - tm->nval, tm->l2->tei);
+		put_tei_msg(tm->mgr, ID_VERIFY, 0, tm->l2->tei);
+		mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 4);
+	} else {
+		tm->tei_m.printdebug(fi, "verify req for tei %d failed",
+			tm->l2->tei);
+		tei_l2(tm->l2, MDL_REMOVE_REQ, 0);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+	}
+}
+
+static struct FsmNode TeiFnListUser[] =
+{
+	{ST_TEI_NOP, EV_IDREQ, tei_id_request},
+	{ST_TEI_NOP, EV_ASSIGN, tei_id_test_dup},
+	{ST_TEI_NOP, EV_VERIFY, tei_id_verify},
+	{ST_TEI_NOP, EV_REMOVE, tei_id_remove},
+	{ST_TEI_NOP, EV_CHKREQ, tei_id_chk_req},
+	{ST_TEI_IDREQ, EV_TIMER, tei_id_req_tout},
+	{ST_TEI_IDREQ, EV_ASSIGN, tei_id_assign},
+	{ST_TEI_IDREQ, EV_DENIED, tei_id_denied},
+	{ST_TEI_IDVERIFY, EV_TIMER, tei_id_ver_tout},
+	{ST_TEI_IDVERIFY, EV_REMOVE, tei_id_remove},
+	{ST_TEI_IDVERIFY, EV_CHKREQ, tei_id_chk_req},
+};
+
+static void
+tei_l2remove(struct layer2 *l2)
+{
+	put_tei_msg(l2->tm->mgr, ID_REMOVE, 0, l2->tei);
+	tei_l2(l2, MDL_REMOVE_REQ, 0);
+	list_del(&l2->ch.list);
+	l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+}
+
+static void
+tei_assign_req(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+
+	if (tm->l2->tei == GROUP_TEI) {
+		tm->tei_m.printdebug(&tm->tei_m,
+			"net tei assign request without tei");
+		return;
+	}
+	tm->ri = ((unsigned int) *dp++ << 8);
+	tm->ri += *dp++;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(&tm->tei_m,
+			"net assign request ri %d teim %d", tm->ri, *dp);
+	put_tei_msg(tm->mgr, ID_ASSIGNED, tm->ri, tm->l2->tei);
+	mISDN_FsmChangeState(fi, ST_TEI_NOP);
+}
+
+static void
+tei_id_chk_req_net(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr	*tm = fi->userdata;
+
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "id check request for tei %d",
+		    tm->l2->tei);
+	tm->rcnt = 0;
+	put_tei_msg(tm->mgr, ID_CHK_REQ, 0, tm->l2->tei);
+	mISDN_FsmChangeState(&tm->tei_m, ST_TEI_IDVERIFY);
+	mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 2);
+	tm->nval = 2;
+}
+
+static void
+tei_id_chk_resp(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int tei;
+
+	tei = dp[3] >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity check resp tei %d", tei);
+	if (tei == tm->l2->tei)
+		tm->rcnt++;
+}
+
+static void
+tei_id_verify_net(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+	u_char *dp = arg;
+	int tei;
+
+	tei = dp[3] >> 1;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(fi, "identity verify req tei %d/%d",
+		    tei, tm->l2->tei);
+	if (tei == tm->l2->tei)
+		tei_id_chk_req_net(fi, event, arg);
+}
+
+static void
+tei_id_ver_tout_net(struct FsmInst *fi, int event, void *arg)
+{
+	struct teimgr *tm = fi->userdata;
+
+	if (tm->rcnt == 1) {
+		if (*debug & DEBUG_L2_TEI)
+			tm->tei_m.printdebug(fi,
+			    "check req for tei %d sucessful\n", tm->l2->tei);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+	} else if (tm->rcnt > 1) {
+		/* duplicate assignment; remove */
+		tei_l2remove(tm->l2);
+	} else if (--tm->nval) {
+		if (*debug & DEBUG_L2_TEI)
+			tm->tei_m.printdebug(fi,
+				"id check req(%d) for tei %d",
+				3 - tm->nval, tm->l2->tei);
+		put_tei_msg(tm->mgr, ID_CHK_REQ, 0, tm->l2->tei);
+		mISDN_FsmAddTimer(&tm->timer, tm->tval, EV_TIMER, NULL, 4);
+	} else {
+		tm->tei_m.printdebug(fi, "check req for tei %d failed",
+			tm->l2->tei);
+		mISDN_FsmChangeState(fi, ST_TEI_NOP);
+		tei_l2remove(tm->l2);
+	}
+}
+
+static struct FsmNode TeiFnListNet[] =
+{
+	{ST_TEI_NOP, EV_ASSIGN_REQ, tei_assign_req},
+	{ST_TEI_NOP, EV_VERIFY, tei_id_verify_net},
+	{ST_TEI_NOP, EV_CHKREQ, tei_id_chk_req_net},
+	{ST_TEI_IDVERIFY, EV_TIMER, tei_id_ver_tout_net},
+	{ST_TEI_IDVERIFY, EV_CHKRESP, tei_id_chk_resp},
+};
+
+static void
+tei_ph_data_ind(struct teimgr *tm, u_int mt, u_char *dp, int len)
+{
+	if (test_bit(FLG_FIXED_TEI, &tm->l2->flag))
+		return;
+	if (*debug & DEBUG_L2_TEI)
+		tm->tei_m.printdebug(&tm->tei_m, "tei handler mt %x", mt);
+	if (mt == ID_ASSIGNED)
+		mISDN_FsmEvent(&tm->tei_m, EV_ASSIGN, dp);
+	else if (mt == ID_DENIED)
+		mISDN_FsmEvent(&tm->tei_m, EV_DENIED, dp);
+	else if (mt == ID_CHK_REQ)
+		mISDN_FsmEvent(&tm->tei_m, EV_CHKREQ, dp);
+	else if (mt == ID_REMOVE)
+		mISDN_FsmEvent(&tm->tei_m, EV_REMOVE, dp);
+	else if (mt == ID_VERIFY)
+		mISDN_FsmEvent(&tm->tei_m, EV_VERIFY, dp);
+	else if (mt == ID_CHK_RES)
+		mISDN_FsmEvent(&tm->tei_m, EV_CHKRESP, dp);
+}
+
+static struct layer2 *
+create_new_tei(struct manager *mgr, int tei)
+{
+	u_long		opt = 0;
+	u_long		flags;
+	int		id;
+	struct layer2	*l2;
+
+	if (!mgr->up)
+		return NULL;
+	if (tei < 64)
+		test_and_set_bit(OPTION_L2_FIXEDTEI, &opt);
+	if (mgr->ch.st->dev->Dprotocols
+	  & ((1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1)))
+		test_and_set_bit(OPTION_L2_PMX, &opt);
+	l2 = create_l2(mgr->up, ISDN_P_LAPD_NT, (u_int)opt, (u_long)tei);
+	if (!l2) {
+		printk(KERN_WARNING "%s:no memory for layer2\n", __func__);
+		return NULL;
+	}
+	l2->tm = kzalloc(sizeof(struct teimgr), GFP_KERNEL);
+	if (!l2->tm) {
+		kfree(l2);
+		printk(KERN_WARNING "%s:no memory for teimgr\n", __func__);
+		return NULL;
+	}
+	l2->tm->mgr = mgr;
+	l2->tm->l2 = l2;
+	l2->tm->tei_m.debug = *debug & DEBUG_L2_TEIFSM;
+	l2->tm->tei_m.userdata = l2->tm;
+	l2->tm->tei_m.printdebug = tei_debug;
+	l2->tm->tei_m.fsm = &teifsmn;
+	l2->tm->tei_m.state = ST_TEI_NOP;
+	l2->tm->tval = 2000; /* T202  2 sec */
+	mISDN_FsmInitTimer(&l2->tm->tei_m, &l2->tm->timer);
+	write_lock_irqsave(&mgr->lock, flags);
+	id = get_free_id(mgr);
+	list_add_tail(&l2->list, &mgr->layer2);
+	write_unlock_irqrestore(&mgr->lock, flags);
+	if (id < 0) {
+		l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+		printk(KERN_WARNING "%s:no free id\n", __func__);
+		return NULL;
+	} else {
+		l2->ch.nr = id;
+		__add_layer2(&l2->ch, mgr->ch.st);
+		l2->ch.recv = mgr->ch.recv;
+		l2->ch.peer = mgr->ch.peer;
+		l2->ch.ctrl(&l2->ch, OPEN_CHANNEL, NULL);
+	}
+	return l2;
+}
+
+static void
+new_tei_req(struct manager *mgr, u_char *dp)
+{
+	int		tei, ri;
+	struct layer2	*l2;
+
+	ri = dp[0] << 8;
+	ri += dp[1];
+	if (!mgr->up)
+		goto denied;
+	tei = get_free_tei(mgr);
+	if (tei < 0) {
+		printk(KERN_WARNING "%s:No free tei\n", __func__);
+		goto denied;
+	}
+	l2 = create_new_tei(mgr, tei);
+	if (!l2)
+		goto denied;
+	else
+		mISDN_FsmEvent(&l2->tm->tei_m, EV_ASSIGN_REQ, dp);
+	return;
+denied:
+	put_tei_msg(mgr, ID_DENIED, ri, GROUP_TEI);
+}
+
+static int
+ph_data_ind(struct manager *mgr, struct sk_buff *skb)
+{
+	int		ret = -EINVAL;
+	struct layer2	*l2;
+	u_long		flags;
+	u_char		mt;
+
+	if (skb->len < 8) {
+		if (*debug  & DEBUG_L2_TEI)
+			printk(KERN_DEBUG "%s: short mgr frame %d/8\n",
+			    __func__, skb->len);
+		goto done;
+	}
+	if (*debug  & DEBUG_L2_TEI)
+
+	if ((skb->data[0] >> 2) != TEI_SAPI) /* not for us */
+		goto done;
+	if (skb->data[0] & 1) /* EA0 formal error */
+		goto done;
+	if (!(skb->data[1] & 1)) /* EA1 formal error */
+		goto done;
+	if ((skb->data[1] >> 1) != GROUP_TEI) /* not for us */
+		goto done;
+	if ((skb->data[2] & 0xef) != UI) /* not UI */
+		goto done;
+	if (skb->data[3] != TEI_ENTITY_ID) /* not tei entity */
+		goto done;
+	mt = skb->data[6];
+	switch (mt) {
+	case ID_REQUEST:
+	case ID_CHK_RES:
+	case ID_VERIFY:
+		if (!test_bit(MGR_OPT_NETWORK, &mgr->options))
+			goto done;
+		break;
+	case ID_ASSIGNED:
+	case ID_DENIED:
+	case ID_CHK_REQ:
+	case ID_REMOVE:
+		if (test_bit(MGR_OPT_NETWORK, &mgr->options))
+			goto done;
+		break;
+	default:
+		goto done;
+	}
+	ret = 0;
+	if (mt == ID_REQUEST) {
+		new_tei_req(mgr, &skb->data[4]);
+		goto done;
+	}
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		tei_ph_data_ind(l2->tm, mt, &skb->data[4], skb->len - 4);
+	}
+	read_unlock_irqrestore(&mgr->lock, flags);
+done:
+	return ret;
+}
+
+int
+l2_tei(struct layer2 *l2, u_int cmd, u_long arg)
+{
+	struct teimgr	*tm = l2->tm;
+
+	if (test_bit(FLG_FIXED_TEI, &l2->flag))
+		return 0;
+	if (*debug & DEBUG_L2_TEI)
+		printk(KERN_DEBUG "%s: cmd(%x)\n", __func__, cmd);
+	switch (cmd) {
+	case MDL_ASSIGN_IND:
+		mISDN_FsmEvent(&tm->tei_m, EV_IDREQ, NULL);
+		break;
+	case MDL_ERROR_IND:
+		if (test_bit(MGR_OPT_NETWORK, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->tei_m, EV_CHKREQ, &l2->tei);
+		if (test_bit(MGR_OPT_USER, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->tei_m, EV_VERIFY, NULL);
+		break;
+	case MDL_STATUS_UP_IND:
+		if (test_bit(MGR_OPT_NETWORK, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->mgr->deact, EV_ACTIVATE, NULL);
+		break;
+	case MDL_STATUS_DOWN_IND:
+		if (test_bit(MGR_OPT_NETWORK, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->mgr->deact, EV_DEACTIVATE, NULL);
+		break;
+	case MDL_STATUS_UI_IND:
+		if (test_bit(MGR_OPT_NETWORK, &tm->mgr->options))
+			mISDN_FsmEvent(&tm->mgr->deact, EV_UI, NULL);
+		break;
+	}
+	return 0;
+}
+
+void
+release_tei(struct layer2 *l2)
+{
+	struct teimgr	*tm = l2->tm;
+	u_long		flags;
+
+	mISDN_FsmDelTimer(&tm->timer, 1);
+	write_lock_irqsave(&tm->mgr->lock, flags);
+	list_del(&l2->list);
+	write_unlock_irqrestore(&tm->mgr->lock, flags);
+	l2->tm = NULL;
+	kfree(tm);
+}
+
+static int
+create_teimgr(struct manager *mgr, struct channel_req *crq)
+{
+	struct layer2	*l2;
+	u_long 		opt = 0;
+	u_long		flags;
+	int		id;
+
+	if (*debug & DEBUG_L2_TEI)
+		printk(KERN_DEBUG "%s: %s proto(%x) adr(%d %d %d %d)\n",
+			__func__, mgr->ch.st->dev->name, crq->protocol,
+			crq->adr.dev, crq->adr.channel, crq->adr.sapi,
+			crq->adr.tei);
+	if (crq->adr.sapi != 0) /* not supported yet */
+		return -EINVAL;
+	if (crq->adr.tei > GROUP_TEI)
+		return -EINVAL;
+	if (crq->adr.tei < 64)
+		test_and_set_bit(OPTION_L2_FIXEDTEI, &opt);
+	if (crq->adr.tei == 0)
+		test_and_set_bit(OPTION_L2_PTP, &opt);
+	if (test_bit(MGR_OPT_NETWORK, &mgr->options)) {
+		if (crq->protocol == ISDN_P_LAPD_TE)
+			return -EPROTONOSUPPORT;
+		if ((crq->adr.tei != 0) && (crq->adr.tei != 127))
+			return -EINVAL;
+		if (mgr->up) {
+			printk(KERN_WARNING
+			    "%s: only one network manager is allowed\n",
+			    __func__);
+			return -EBUSY;
+		}
+	} else if (test_bit(MGR_OPT_USER, &mgr->options)) {
+		if (crq->protocol == ISDN_P_LAPD_NT)
+			return -EPROTONOSUPPORT;
+		if ((crq->adr.tei >= 64) && (crq->adr.tei < GROUP_TEI))
+			return -EINVAL; /* dyn tei */
+	} else {
+		if (crq->protocol == ISDN_P_LAPD_NT)
+			test_and_set_bit(MGR_OPT_NETWORK, &mgr->options);
+		if (crq->protocol == ISDN_P_LAPD_TE)
+			test_and_set_bit(MGR_OPT_USER, &mgr->options);
+	}
+	if (mgr->ch.st->dev->Dprotocols
+	  & ((1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1)))
+		test_and_set_bit(OPTION_L2_PMX, &opt);
+	if ((crq->protocol == ISDN_P_LAPD_NT) && (crq->adr.tei == 127)) {
+		mgr->up = crq->ch;
+		id = DL_INFO_L2_CONNECT;
+		teiup_create(mgr, DL_INFORMATION_IND, sizeof(id), &id);
+		crq->ch = NULL;
+		if (!list_empty(&mgr->layer2)) {
+			read_lock_irqsave(&mgr->lock, flags);
+			list_for_each_entry(l2, &mgr->layer2, list) {
+				l2->up = mgr->up;
+				l2->ch.ctrl(&l2->ch, OPEN_CHANNEL, NULL);
+			}
+			read_unlock_irqrestore(&mgr->lock, flags);
+		}
+		return 0;
+	}
+	l2 = create_l2(crq->ch, crq->protocol, (u_int)opt,
+		(u_long)crq->adr.tei);
+	if (!l2)
+		return -ENOMEM;
+	l2->tm = kzalloc(sizeof(struct teimgr), GFP_KERNEL);
+	if (!l2->tm) {
+		kfree(l2);
+		printk(KERN_ERR "kmalloc teimgr failed\n");
+		return -ENOMEM;
+	}
+	l2->tm->mgr = mgr;
+	l2->tm->l2 = l2;
+	l2->tm->tei_m.debug = *debug & DEBUG_L2_TEIFSM;
+	l2->tm->tei_m.userdata = l2->tm;
+	l2->tm->tei_m.printdebug = tei_debug;
+	if (crq->protocol == ISDN_P_LAPD_TE) {
+		l2->tm->tei_m.fsm = &teifsmu;
+		l2->tm->tei_m.state = ST_TEI_NOP;
+		l2->tm->tval = 1000; /* T201  1 sec */
+	} else {
+		l2->tm->tei_m.fsm = &teifsmn;
+		l2->tm->tei_m.state = ST_TEI_NOP;
+		l2->tm->tval = 2000; /* T202  2 sec */
+	}
+	mISDN_FsmInitTimer(&l2->tm->tei_m, &l2->tm->timer);
+	write_lock_irqsave(&mgr->lock, flags);
+	id = get_free_id(mgr);
+	list_add_tail(&l2->list, &mgr->layer2);
+	write_unlock_irqrestore(&mgr->lock, flags);
+	if (id < 0) {
+		l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+	} else {
+		l2->ch.nr = id;
+		l2->up->nr = id;
+		crq->ch = &l2->ch;
+		id = 0;
+	}
+	return id;
+}
+
+static int
+mgr_send(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct manager	*mgr;
+	struct mISDNhead	*hh =  mISDN_HEAD_P(skb);
+	int			ret = -EINVAL;
+
+	mgr = container_of(ch, struct manager, ch);
+	if (*debug & DEBUG_L2_RECV)
+		printk(KERN_DEBUG "%s: prim(%x) id(%x)\n",
+		    __func__, hh->prim, hh->id);
+	switch (hh->prim) {
+	case PH_DATA_IND:
+		mISDN_FsmEvent(&mgr->deact, EV_UI, NULL);
+		ret = ph_data_ind(mgr, skb);
+		break;
+	case PH_DATA_CNF:
+		do_ack(mgr, hh->id);
+		ret = 0;
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(MGR_PH_ACTIVE, &mgr->options);
+		mISDN_FsmEvent(&mgr->deact, EV_ACTIVATE_IND, NULL);
+		do_send(mgr);
+		ret = 0;
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(MGR_PH_ACTIVE, &mgr->options);
+		mISDN_FsmEvent(&mgr->deact, EV_DEACTIVATE_IND, NULL);
+		ret = 0;
+		break;
+	case DL_UNITDATA_REQ:
+		return dl_unit_data(mgr, skb);
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static int
+free_teimanager(struct manager *mgr)
+{
+	struct layer2	*l2, *nl2;
+
+	if (test_bit(MGR_OPT_NETWORK, &mgr->options)) {
+		/* not locked lock is taken in release tei */
+		mgr->up = NULL;
+		if (test_bit(OPTION_L2_CLEANUP, &mgr->options)) {
+			list_for_each_entry_safe(l2, nl2, &mgr->layer2, list) {
+				put_tei_msg(mgr, ID_REMOVE, 0, l2->tei);
+				mutex_lock(&mgr->ch.st->lmutex);
+				list_del(&l2->ch.list);
+				mutex_unlock(&mgr->ch.st->lmutex);
+				l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+			}
+			test_and_clear_bit(MGR_OPT_NETWORK, &mgr->options);
+		} else {
+			list_for_each_entry_safe(l2, nl2, &mgr->layer2, list) {
+				l2->up = NULL;
+			}
+		}
+	}
+	if (test_bit(MGR_OPT_USER, &mgr->options)) {
+		if (list_empty(&mgr->layer2))
+			test_and_clear_bit(MGR_OPT_USER, &mgr->options);
+	}
+	mgr->ch.st->dev->D.ctrl(&mgr->ch.st->dev->D, CLOSE_CHANNEL, NULL);
+	return 0;
+}
+
+static int
+ctrl_teimanager(struct manager *mgr, void *arg)
+{
+	/* currently we only have one option */
+	int	clean = *((int *)arg);
+
+	if (clean)
+		test_and_set_bit(OPTION_L2_CLEANUP, &mgr->options);
+	else
+		test_and_clear_bit(OPTION_L2_CLEANUP, &mgr->options);
+	return 0;
+}
+
+/* This function does create a L2 for fixed TEI in NT Mode */
+static int
+check_data(struct manager *mgr, struct sk_buff *skb)
+{
+	struct mISDNhead	*hh =  mISDN_HEAD_P(skb);
+	int			ret, tei;
+	struct layer2		*l2;
+
+	if (*debug & DEBUG_L2_CTRL)
+		printk(KERN_DEBUG "%s: prim(%x) id(%x)\n",
+		    __func__, hh->prim, hh->id);
+	if (test_bit(MGR_OPT_USER, &mgr->options))
+		return -ENOTCONN;
+	if (hh->prim != PH_DATA_IND)
+		return -ENOTCONN;
+	if (skb->len != 3)
+		return -ENOTCONN;
+	if (skb->data[0] != 0)
+		/* only SAPI 0 command */
+		return -ENOTCONN;
+	if (!(skb->data[1] & 1)) /* invalid EA1 */
+		return -EINVAL;
+	tei = skb->data[1] >> 0;
+	if (tei > 63) /* not a fixed tei */
+		return -ENOTCONN;
+	if ((skb->data[2] & ~0x10) != SABME)
+		return -ENOTCONN;
+	/* We got a SABME for a fixed TEI */
+	l2 = create_new_tei(mgr, tei);
+	if (!l2)
+		return -ENOMEM;
+	ret = l2->ch.send(&l2->ch, skb);
+	return ret;
+}
+
+void
+delete_teimanager(struct mISDNchannel *ch)
+{
+	struct manager	*mgr;
+	struct layer2	*l2, *nl2;
+
+	mgr = container_of(ch, struct manager, ch);
+	/* not locked lock is taken in release tei */
+	list_for_each_entry_safe(l2, nl2, &mgr->layer2, list) {
+		mutex_lock(&mgr->ch.st->lmutex);
+		list_del(&l2->ch.list);
+		mutex_unlock(&mgr->ch.st->lmutex);
+		l2->ch.ctrl(&l2->ch, CLOSE_CHANNEL, NULL);
+	}
+	list_del(&mgr->ch.list);
+	list_del(&mgr->bcast.list);
+	skb_queue_purge(&mgr->sendq);
+	kfree(mgr);
+}
+
+static int
+mgr_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct manager	*mgr;
+	int		ret = -EINVAL;
+
+	mgr = container_of(ch, struct manager, ch);
+	if (*debug & DEBUG_L2_CTRL)
+		printk(KERN_DEBUG "%s(%x, %p)\n", __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		ret = create_teimgr(mgr, arg);
+		break;
+	case CLOSE_CHANNEL:
+		ret = free_teimanager(mgr);
+		break;
+	case CONTROL_CHANNEL:
+		ret = ctrl_teimanager(mgr, arg);
+		break;
+	case CHECK_DATA:
+		ret = check_data(mgr, arg);
+		break;
+	}
+	return ret;
+}
+
+static int
+mgr_bcast(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct manager		*mgr = container_of(ch, struct manager, bcast);
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	struct sk_buff		*cskb = NULL;
+	struct layer2		*l2;
+	u_long			flags;
+	int			ret;
+
+	read_lock_irqsave(&mgr->lock, flags);
+	list_for_each_entry(l2, &mgr->layer2, list) {
+		if ((hh->id & MISDN_ID_SAPI_MASK) ==
+		    (l2->ch.addr & MISDN_ID_SAPI_MASK)) {
+			if (list_is_last(&l2->list, &mgr->layer2)) {
+				cskb = skb;
+				skb = NULL;
+			} else {
+				if (!cskb)
+					cskb = skb_copy(skb, GFP_KERNEL);
+			}
+			if (cskb) {
+				ret = l2->ch.send(&l2->ch, cskb);
+				if (ret) {
+					if (*debug & DEBUG_SEND_ERR)
+						printk(KERN_DEBUG
+						    "%s ch%d prim(%x) addr(%x)"
+						    " err %d\n",
+						    __func__, l2->ch.nr,
+						    hh->prim, l2->ch.addr, ret);
+				} else
+					cskb = NULL;
+			} else {
+				printk(KERN_WARNING "%s ch%d addr %x no mem\n",
+				    __func__, ch->nr, ch->addr);
+				goto out;
+			}
+		}
+	}
+out:
+	read_unlock_irqrestore(&mgr->lock, flags);
+	if (cskb)
+		dev_kfree_skb(cskb);
+	if (skb)
+		dev_kfree_skb(skb);
+	return 0;
+}
+
+static int
+mgr_bcast_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+
+	return -EINVAL;
+}
+
+int
+create_teimanager(struct mISDNdevice *dev)
+{
+	struct manager *mgr;
+
+	mgr = kzalloc(sizeof(struct manager), GFP_KERNEL);
+	if (!mgr)
+		return -ENOMEM;
+	INIT_LIST_HEAD(&mgr->layer2);
+	mgr->lock = __RW_LOCK_UNLOCKED(mgr->lock);
+	skb_queue_head_init(&mgr->sendq);
+	mgr->nextid = 1;
+	mgr->lastid = MISDN_ID_NONE;
+	mgr->ch.send = mgr_send;
+	mgr->ch.ctrl = mgr_ctrl;
+	mgr->ch.st = dev->D.st;
+	set_channel_address(&mgr->ch, TEI_SAPI, GROUP_TEI);
+	add_layer2(&mgr->ch, dev->D.st);
+	mgr->bcast.send = mgr_bcast;
+	mgr->bcast.ctrl = mgr_bcast_ctrl;
+	mgr->bcast.st = dev->D.st;
+	set_channel_address(&mgr->bcast, 0, GROUP_TEI);
+	add_layer2(&mgr->bcast, dev->D.st);
+	mgr->deact.debug = *debug & DEBUG_MANAGER;
+	mgr->deact.userdata = mgr;
+	mgr->deact.printdebug = da_debug;
+	mgr->deact.fsm = &deactfsm;
+	mgr->deact.state = ST_L1_DEACT;
+	mISDN_FsmInitTimer(&mgr->deact, &mgr->datimer);
+	dev->teimgr = &mgr->ch;
+	return 0;
+}
+
+int TEIInit(u_int *deb)
+{
+	debug = deb;
+	teifsmu.state_count = TEI_STATE_COUNT;
+	teifsmu.event_count = TEI_EVENT_COUNT;
+	teifsmu.strEvent = strTeiEvent;
+	teifsmu.strState = strTeiState;
+	mISDN_FsmNew(&teifsmu, TeiFnListUser, ARRAY_SIZE(TeiFnListUser));
+	teifsmn.state_count = TEI_STATE_COUNT;
+	teifsmn.event_count = TEI_EVENT_COUNT;
+	teifsmn.strEvent = strTeiEvent;
+	teifsmn.strState = strTeiState;
+	mISDN_FsmNew(&teifsmn, TeiFnListNet, ARRAY_SIZE(TeiFnListNet));
+	deactfsm.state_count =  DEACT_STATE_COUNT;
+	deactfsm.event_count = DEACT_EVENT_COUNT;
+	deactfsm.strEvent = strDeactEvent;
+	deactfsm.strState = strDeactState;
+	mISDN_FsmNew(&deactfsm, DeactFnList, ARRAY_SIZE(DeactFnList));
+	return 0;
+}
+
+void TEIFree(void)
+{
+	mISDN_FsmFree(&teifsmu);
+	mISDN_FsmFree(&teifsmn);
+	mISDN_FsmFree(&deactfsm);
+}
diff --git a/drivers/isdn/mISDN/timerdev.c b/drivers/isdn/mISDN/timerdev.c
new file mode 100644
index 00000000000..b5fabc7019d
--- /dev/null
+++ b/drivers/isdn/mISDN/timerdev.c
@@ -0,0 +1,301 @@
+/*
+ *
+ * general timer device for using in ISDN stacks
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/poll.h>
+#include <linux/vmalloc.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mISDNif.h>
+
+static int	*debug;
+
+
+struct mISDNtimerdev {
+	int			next_id;
+	struct list_head	pending;
+	struct list_head	expired;
+	wait_queue_head_t	wait;
+	u_int			work;
+	spinlock_t		lock; /* protect lists */
+};
+
+struct mISDNtimer {
+	struct list_head	list;
+	struct  mISDNtimerdev	*dev;
+	struct timer_list	tl;
+	int			id;
+};
+
+static int
+mISDN_open(struct inode *ino, struct file *filep)
+{
+	struct mISDNtimerdev	*dev;
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p,%p)\n", __func__, ino, filep);
+	dev = kmalloc(sizeof(struct mISDNtimerdev) , GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+	dev->next_id = 1;
+	INIT_LIST_HEAD(&dev->pending);
+	INIT_LIST_HEAD(&dev->expired);
+	spin_lock_init(&dev->lock);
+	dev->work = 0;
+	init_waitqueue_head(&dev->wait);
+	filep->private_data = dev;
+	__module_get(THIS_MODULE);
+	return 0;
+}
+
+static int
+mISDN_close(struct inode *ino, struct file *filep)
+{
+	struct mISDNtimerdev	*dev = filep->private_data;
+	struct mISDNtimer	*timer, *next;
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p,%p)\n", __func__, ino, filep);
+	list_for_each_entry_safe(timer, next, &dev->pending, list) {
+		del_timer(&timer->tl);
+		kfree(timer);
+	}
+	list_for_each_entry_safe(timer, next, &dev->expired, list) {
+		kfree(timer);
+	}
+	kfree(dev);
+	module_put(THIS_MODULE);
+	return 0;
+}
+
+static ssize_t
+mISDN_read(struct file *filep, char *buf, size_t count, loff_t *off)
+{
+	struct mISDNtimerdev	*dev = filep->private_data;
+	struct mISDNtimer	*timer;
+	u_long	flags;
+	int	ret = 0;
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p, %p, %d, %p)\n", __func__,
+			filep, buf, (int)count, off);
+	if (*off != filep->f_pos)
+		return -ESPIPE;
+
+	if (list_empty(&dev->expired) && (dev->work == 0)) {
+		if (filep->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		wait_event_interruptible(dev->wait, (dev->work ||
+		    !list_empty(&dev->expired)));
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+	}
+	if (count < sizeof(int))
+		return -ENOSPC;
+	if (dev->work)
+		dev->work = 0;
+	if (!list_empty(&dev->expired)) {
+		spin_lock_irqsave(&dev->lock, flags);
+		timer = (struct mISDNtimer *)dev->expired.next;
+		list_del(&timer->list);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		if (put_user(timer->id, (int *)buf))
+			ret = -EFAULT;
+		else
+			ret = sizeof(int);
+		kfree(timer);
+	}
+	return ret;
+}
+
+static loff_t
+mISDN_llseek(struct file *filep, loff_t offset, int orig)
+{
+	return -ESPIPE;
+}
+
+static ssize_t
+mISDN_write(struct file *filep, const char *buf, size_t count, loff_t *off)
+{
+	return -EOPNOTSUPP;
+}
+
+static unsigned int
+mISDN_poll(struct file *filep, poll_table *wait)
+{
+	struct mISDNtimerdev	*dev = filep->private_data;
+	unsigned int		mask = POLLERR;
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p, %p)\n", __func__, filep, wait);
+	if (dev) {
+		poll_wait(filep, &dev->wait, wait);
+		mask = 0;
+		if (dev->work || !list_empty(&dev->expired))
+			mask |= (POLLIN | POLLRDNORM);
+		if (*debug & DEBUG_TIMER)
+			printk(KERN_DEBUG "%s work(%d) empty(%d)\n", __func__,
+				dev->work, list_empty(&dev->expired));
+	}
+	return mask;
+}
+
+static void
+dev_expire_timer(struct mISDNtimer *timer)
+{
+	u_long			flags;
+
+	spin_lock_irqsave(&timer->dev->lock, flags);
+	list_del(&timer->list);
+	list_add_tail(&timer->list, &timer->dev->expired);
+	spin_unlock_irqrestore(&timer->dev->lock, flags);
+	wake_up_interruptible(&timer->dev->wait);
+}
+
+static int
+misdn_add_timer(struct mISDNtimerdev *dev, int timeout)
+{
+	int 			id;
+	u_long			flags;
+	struct mISDNtimer	*timer;
+
+	if (!timeout) {
+		dev->work = 1;
+		wake_up_interruptible(&dev->wait);
+		id = 0;
+	} else {
+		timer = kzalloc(sizeof(struct mISDNtimer), GFP_KERNEL);
+		if (!timer)
+			return -ENOMEM;
+		spin_lock_irqsave(&dev->lock, flags);
+		timer->id = dev->next_id++;
+		if (dev->next_id < 0)
+			dev->next_id = 1;
+		list_add_tail(&timer->list, &dev->pending);
+		spin_unlock_irqrestore(&dev->lock, flags);
+		timer->dev = dev;
+		timer->tl.data = (long)timer;
+		timer->tl.function = (void *) dev_expire_timer;
+		init_timer(&timer->tl);
+		timer->tl.expires = jiffies + ((HZ * (u_long)timeout) / 1000);
+		add_timer(&timer->tl);
+		id = timer->id;
+	}
+	return id;
+}
+
+static int
+misdn_del_timer(struct mISDNtimerdev *dev, int id)
+{
+	u_long			flags;
+	struct mISDNtimer	*timer;
+	int			ret = 0;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	list_for_each_entry(timer, &dev->pending, list) {
+		if (timer->id == id) {
+			list_del_init(&timer->list);
+			del_timer(&timer->tl);
+			ret = timer->id;
+			kfree(timer);
+			goto unlock;
+		}
+	}
+unlock:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int
+mISDN_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
+    unsigned long arg)
+{
+	struct mISDNtimerdev	*dev = filep->private_data;
+	int			id, tout, ret = 0;
+
+
+	if (*debug & DEBUG_TIMER)
+		printk(KERN_DEBUG "%s(%p, %x, %lx)\n", __func__,
+		    filep, cmd, arg);
+	switch (cmd) {
+	case IMADDTIMER:
+		if (get_user(tout, (int __user *)arg)) {
+			ret = -EFAULT;
+			break;
+		}
+		id = misdn_add_timer(dev, tout);
+		if (*debug & DEBUG_TIMER)
+			printk(KERN_DEBUG "%s add %d id %d\n", __func__,
+			    tout, id);
+		if (id < 0) {
+			ret = id;
+			break;
+		}
+		if (put_user(id, (int __user *)arg))
+			ret = -EFAULT;
+		break;
+	case IMDELTIMER:
+		if (get_user(id, (int __user *)arg)) {
+			ret = -EFAULT;
+			break;
+		}
+		if (*debug & DEBUG_TIMER)
+			printk(KERN_DEBUG "%s del id %d\n", __func__, id);
+		id = misdn_del_timer(dev, id);
+		if (put_user(id, (int __user *)arg))
+			ret = -EFAULT;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static struct file_operations mISDN_fops = {
+	.llseek		= mISDN_llseek,
+	.read		= mISDN_read,
+	.write		= mISDN_write,
+	.poll		= mISDN_poll,
+	.ioctl		= mISDN_ioctl,
+	.open		= mISDN_open,
+	.release	= mISDN_close,
+};
+
+static struct miscdevice mISDNtimer = {
+	.minor	= MISC_DYNAMIC_MINOR,
+	.name	= "mISDNtimer",
+	.fops	= &mISDN_fops,
+};
+
+int
+mISDN_inittimer(int *deb)
+{
+	int	err;
+
+	debug = deb;
+	err = misc_register(&mISDNtimer);
+	if (err)
+		printk(KERN_WARNING "mISDN: Could not register timer device\n");
+	return err;
+}
+
+void mISDN_timer_cleanup(void)
+{
+	misc_deregister(&mISDNtimer);
+}
diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h
new file mode 100644
index 00000000000..e794dfb8750
--- /dev/null
+++ b/include/linux/mISDNhw.h
@@ -0,0 +1,193 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ *   Basic declarations for the mISDN HW channels
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef MISDNHW_H
+#define MISDNHW_H
+#include <linux/mISDNif.h>
+#include <linux/timer.h>
+
+/*
+ * HW DEBUG 0xHHHHGGGG
+ * H - hardware driver specific bits
+ * G - for all drivers
+ */
+
+#define DEBUG_HW		0x00000001
+#define DEBUG_HW_OPEN		0x00000002
+#define DEBUG_HW_DCHANNEL	0x00000100
+#define DEBUG_HW_DFIFO		0x00000200
+#define DEBUG_HW_BCHANNEL	0x00001000
+#define DEBUG_HW_BFIFO		0x00002000
+
+#define MAX_DFRAME_LEN_L1	300
+#define MAX_MON_FRAME		32
+#define MAX_LOG_SPACE		2048
+#define MISDN_COPY_SIZE		32
+
+/* channel->Flags bit field */
+#define FLG_TX_BUSY		0	/* tx_buf in use */
+#define FLG_TX_NEXT		1	/* next_skb in use */
+#define FLG_L1_BUSY		2	/* L1 is permanent busy */
+#define FLG_L2_ACTIVATED	3	/* activated from L2 */
+#define FLG_OPEN		5	/* channel is in use */
+#define FLG_ACTIVE		6	/* channel is activated */
+#define FLG_BUSY_TIMER		7
+/* channel type */
+#define FLG_DCHANNEL		8	/* channel is D-channel */
+#define FLG_BCHANNEL		9	/* channel is B-channel */
+#define FLG_ECHANNEL		10	/* channel is E-channel */
+#define FLG_TRANSPARENT		12	/* channel use transparent data */
+#define FLG_HDLC		13	/* channel use hdlc data */
+#define FLG_L2DATA		14	/* channel use L2 DATA primitivs */
+#define FLG_ORIGIN		15	/* channel is on origin site */
+/* channel specific stuff */
+/* arcofi specific */
+#define FLG_ARCOFI_TIMER	16
+#define FLG_ARCOFI_ERROR	17
+/* isar specific */
+#define FLG_INITIALIZED		16
+#define FLG_DLEETX		17
+#define FLG_LASTDLE		18
+#define FLG_FIRST		19
+#define FLG_LASTDATA		20
+#define FLG_NMD_DATA		21
+#define FLG_FTI_RUN		22
+#define FLG_LL_OK		23
+#define FLG_LL_CONN		24
+#define FLG_DTMFSEND		25
+
+/* workq events */
+#define FLG_RECVQUEUE		30
+#define	FLG_PHCHANGE		31
+
+#define schedule_event(s, ev)	do { \
+					test_and_set_bit(ev, &((s)->Flags)); \
+					schedule_work(&((s)->workq)); \
+				} while (0)
+
+struct dchannel {
+	struct mISDNdevice	dev;
+	u_long			Flags;
+	struct work_struct	workq;
+	void			(*phfunc) (struct dchannel *);
+	u_int			state;
+	void			*l1;
+	/* HW access */
+	u_char			(*read_reg) (void *, u_char);
+	void			(*write_reg) (void *, u_char, u_char);
+	void			(*read_fifo) (void *, u_char *, int);
+	void			(*write_fifo) (void *, u_char *, int);
+	void			*hw;
+	int			slot;	/* multiport card channel slot */
+	struct timer_list	timer;
+	/* receive data */
+	struct sk_buff		*rx_skb;
+	int			maxlen;
+	/* send data */
+	struct sk_buff_head	squeue;
+	struct sk_buff_head	rqueue;
+	struct sk_buff		*tx_skb;
+	int			tx_idx;
+	int			debug;
+	/* statistics */
+	int			err_crc;
+	int			err_tx;
+	int			err_rx;
+};
+
+typedef int	(dchannel_l1callback)(struct dchannel *, u_int);
+extern int	create_l1(struct dchannel *, dchannel_l1callback *);
+
+/* private L1 commands */
+#define INFO0		0x8002
+#define INFO1		0x8102
+#define INFO2		0x8202
+#define INFO3_P8	0x8302
+#define INFO3_P10	0x8402
+#define INFO4_P8	0x8502
+#define INFO4_P10	0x8602
+#define LOSTFRAMING	0x8702
+#define ANYSIGNAL	0x8802
+#define HW_POWERDOWN	0x8902
+#define HW_RESET_REQ	0x8a02
+#define HW_POWERUP_REQ	0x8b02
+#define HW_DEACT_REQ	0x8c02
+#define HW_ACTIVATE_REQ	0x8e02
+#define HW_D_NOBLOCKED  0x8f02
+#define HW_RESET_IND	0x9002
+#define HW_POWERUP_IND	0x9102
+#define HW_DEACT_IND	0x9202
+#define HW_ACTIVATE_IND	0x9302
+#define HW_DEACT_CNF	0x9402
+#define HW_TESTLOOP	0x9502
+#define HW_TESTRX_RAW	0x9602
+#define HW_TESTRX_HDLC	0x9702
+#define HW_TESTRX_OFF	0x9802
+
+struct layer1;
+extern int	l1_event(struct layer1 *, u_int);
+
+
+struct bchannel {
+	struct mISDNchannel	ch;
+	int			nr;
+	u_long			Flags;
+	struct work_struct	workq;
+	u_int			state;
+	/* HW access */
+	u_char			(*read_reg) (void *, u_char);
+	void			(*write_reg) (void *, u_char, u_char);
+	void			(*read_fifo) (void *, u_char *, int);
+	void			(*write_fifo) (void *, u_char *, int);
+	void			*hw;
+	int			slot;	/* multiport card channel slot */
+	struct timer_list	timer;
+	/* receive data */
+	struct sk_buff		*rx_skb;
+	int			maxlen;
+	/* send data */
+	struct sk_buff		*next_skb;
+	struct sk_buff		*tx_skb;
+	struct sk_buff_head	rqueue;
+	int			rcount;
+	int			tx_idx;
+	int			debug;
+	/* statistics */
+	int			err_crc;
+	int			err_tx;
+	int			err_rx;
+};
+
+extern int	mISDN_initdchannel(struct dchannel *, int, void *);
+extern int	mISDN_initbchannel(struct bchannel *, int);
+extern int	mISDN_freedchannel(struct dchannel *);
+extern int	mISDN_freebchannel(struct bchannel *);
+extern void	queue_ch_frame(struct mISDNchannel *, u_int,
+			int, struct sk_buff *);
+extern int	dchannel_senddata(struct dchannel *, struct sk_buff *);
+extern int	bchannel_senddata(struct bchannel *, struct sk_buff *);
+extern void	recv_Dchannel(struct dchannel *);
+extern void	recv_Bchannel(struct bchannel *);
+extern void	recv_Dchannel_skb(struct dchannel *, struct sk_buff *);
+extern void	recv_Bchannel_skb(struct bchannel *, struct sk_buff *);
+extern void	confirm_Bsend(struct bchannel *bch);
+extern int	get_next_bframe(struct bchannel *);
+extern int	get_next_dframe(struct dchannel *);
+
+#endif
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
new file mode 100644
index 00000000000..5c948f33781
--- /dev/null
+++ b/include/linux/mISDNif.h
@@ -0,0 +1,487 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU LESSER GENERAL PUBLIC LICENSE
+ * version 2.1 as published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU LESSER GENERAL PUBLIC LICENSE for more details.
+ *
+ */
+
+#ifndef mISDNIF_H
+#define mISDNIF_H
+
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/socket.h>
+
+/*
+ * ABI Version 32 bit
+ *
+ * <8 bit> Major version
+ *		- changed if any interface become backwards incompatible
+ *
+ * <8 bit> Minor version
+ *              - changed if any interface is extended but backwards compatible
+ *
+ * <16 bit> Release number
+ *              - should be incremented on every checkin
+ */
+#define	MISDN_MAJOR_VERSION	1
+#define	MISDN_MINOR_VERSION	0
+#define MISDN_RELEASE		18
+
+/* primitives for information exchange
+ * generell format
+ * <16  bit  0 >
+ * <8  bit command>
+ *    BIT 8 = 1 LAYER private
+ *    BIT 7 = 1 answer
+ *    BIT 6 = 1 DATA
+ * <8  bit target layer mask>
+ *
+ * Layer = 00 is reserved for general commands
+   Layer = 01  L2 -> HW
+   Layer = 02  HW -> L2
+   Layer = 04  L3 -> L2
+   Layer = 08  L2 -> L3
+ * Layer = FF is reserved for broadcast commands
+ */
+
+#define MISDN_CMDMASK		0xff00
+#define MISDN_LAYERMASK		0x00ff
+
+/* generell commands */
+#define OPEN_CHANNEL		0x0100
+#define CLOSE_CHANNEL		0x0200
+#define CONTROL_CHANNEL		0x0300
+#define CHECK_DATA		0x0400
+
+/* layer 2 -> layer 1 */
+#define PH_ACTIVATE_REQ		0x0101
+#define PH_DEACTIVATE_REQ	0x0201
+#define PH_DATA_REQ		0x2001
+#define MPH_ACTIVATE_REQ	0x0501
+#define MPH_DEACTIVATE_REQ	0x0601
+#define MPH_INFORMATION_REQ	0x0701
+#define PH_CONTROL_REQ		0x0801
+
+/* layer 1 -> layer 2 */
+#define PH_ACTIVATE_IND		0x0102
+#define PH_ACTIVATE_CNF		0x4102
+#define PH_DEACTIVATE_IND	0x0202
+#define PH_DEACTIVATE_CNF	0x4202
+#define PH_DATA_IND		0x2002
+#define MPH_ACTIVATE_IND	0x0502
+#define MPH_DEACTIVATE_IND	0x0602
+#define MPH_INFORMATION_IND	0x0702
+#define PH_DATA_CNF		0x6002
+#define PH_CONTROL_IND		0x0802
+#define PH_CONTROL_CNF		0x4802
+
+/* layer 3 -> layer 2 */
+#define DL_ESTABLISH_REQ	0x1004
+#define DL_RELEASE_REQ		0x1104
+#define DL_DATA_REQ		0x3004
+#define DL_UNITDATA_REQ		0x3104
+#define DL_INFORMATION_REQ	0x0004
+
+/* layer 2 -> layer 3 */
+#define DL_ESTABLISH_IND	0x1008
+#define DL_ESTABLISH_CNF	0x5008
+#define DL_RELEASE_IND		0x1108
+#define DL_RELEASE_CNF		0x5108
+#define DL_DATA_IND		0x3008
+#define DL_UNITDATA_IND		0x3108
+#define DL_INFORMATION_IND	0x0008
+
+/* intern layer 2 managment */
+#define MDL_ASSIGN_REQ		0x1804
+#define MDL_ASSIGN_IND		0x1904
+#define MDL_REMOVE_REQ		0x1A04
+#define MDL_REMOVE_IND		0x1B04
+#define MDL_STATUS_UP_IND	0x1C04
+#define MDL_STATUS_DOWN_IND	0x1D04
+#define MDL_STATUS_UI_IND	0x1E04
+#define MDL_ERROR_IND		0x1F04
+#define MDL_ERROR_RSP		0x5F04
+
+/* DL_INFORMATION_IND types */
+#define DL_INFO_L2_CONNECT	0x0001
+#define DL_INFO_L2_REMOVED	0x0002
+
+/* PH_CONTROL types */
+/* TOUCH TONE IS 0x20XX  XX "0"..."9", "A","B","C","D","*","#" */
+#define DTMF_TONE_VAL		0x2000
+#define DTMF_TONE_MASK		0x007F
+#define DTMF_TONE_START		0x2100
+#define DTMF_TONE_STOP		0x2200
+#define DTMF_HFC_COEF		0x4000
+#define DSP_CONF_JOIN		0x2403
+#define DSP_CONF_SPLIT		0x2404
+#define DSP_RECEIVE_OFF		0x2405
+#define DSP_RECEIVE_ON		0x2406
+#define DSP_ECHO_ON		0x2407
+#define DSP_ECHO_OFF		0x2408
+#define DSP_MIX_ON		0x2409
+#define DSP_MIX_OFF		0x240a
+#define DSP_DELAY		0x240b
+#define DSP_JITTER		0x240c
+#define DSP_TXDATA_ON		0x240d
+#define DSP_TXDATA_OFF		0x240e
+#define DSP_TX_DEJITTER		0x240f
+#define DSP_TX_DEJ_OFF		0x2410
+#define DSP_TONE_PATT_ON	0x2411
+#define DSP_TONE_PATT_OFF	0x2412
+#define DSP_VOL_CHANGE_TX	0x2413
+#define DSP_VOL_CHANGE_RX	0x2414
+#define DSP_BF_ENABLE_KEY	0x2415
+#define DSP_BF_DISABLE		0x2416
+#define DSP_BF_ACCEPT		0x2416
+#define DSP_BF_REJECT		0x2417
+#define DSP_PIPELINE_CFG	0x2418
+#define HFC_VOL_CHANGE_TX	0x2601
+#define HFC_VOL_CHANGE_RX	0x2602
+#define HFC_SPL_LOOP_ON		0x2603
+#define HFC_SPL_LOOP_OFF	0x2604
+
+/* DSP_TONE_PATT_ON parameter */
+#define TONE_OFF			0x0000
+#define TONE_GERMAN_DIALTONE		0x0001
+#define TONE_GERMAN_OLDDIALTONE		0x0002
+#define TONE_AMERICAN_DIALTONE		0x0003
+#define TONE_GERMAN_DIALPBX		0x0004
+#define TONE_GERMAN_OLDDIALPBX		0x0005
+#define TONE_AMERICAN_DIALPBX		0x0006
+#define TONE_GERMAN_RINGING		0x0007
+#define TONE_GERMAN_OLDRINGING		0x0008
+#define TONE_AMERICAN_RINGPBX		0x000b
+#define TONE_GERMAN_RINGPBX		0x000c
+#define TONE_GERMAN_OLDRINGPBX		0x000d
+#define TONE_AMERICAN_RINGING		0x000e
+#define TONE_GERMAN_BUSY		0x000f
+#define TONE_GERMAN_OLDBUSY		0x0010
+#define TONE_AMERICAN_BUSY		0x0011
+#define TONE_GERMAN_HANGUP		0x0012
+#define TONE_GERMAN_OLDHANGUP		0x0013
+#define TONE_AMERICAN_HANGUP		0x0014
+#define TONE_SPECIAL_INFO		0x0015
+#define TONE_GERMAN_GASSENBESETZT	0x0016
+#define TONE_GERMAN_AUFSCHALTTON	0x0016
+
+/* MPH_INFORMATION_IND */
+#define L1_SIGNAL_LOS_OFF	0x0010
+#define L1_SIGNAL_LOS_ON	0x0011
+#define L1_SIGNAL_AIS_OFF	0x0012
+#define L1_SIGNAL_AIS_ON	0x0013
+#define L1_SIGNAL_RDI_OFF	0x0014
+#define L1_SIGNAL_RDI_ON	0x0015
+#define L1_SIGNAL_SLIP_RX	0x0020
+#define L1_SIGNAL_SLIP_TX	0x0021
+
+/*
+ * protocol ids
+ * D channel 1-31
+ * B channel 33 - 63
+ */
+
+#define ISDN_P_NONE		0
+#define ISDN_P_BASE		0
+#define ISDN_P_TE_S0		0x01
+#define ISDN_P_NT_S0  		0x02
+#define ISDN_P_TE_E1		0x03
+#define ISDN_P_NT_E1  		0x04
+#define ISDN_P_LAPD_TE		0x10
+#define	ISDN_P_LAPD_NT		0x11
+
+#define ISDN_P_B_MASK		0x1f
+#define ISDN_P_B_START		0x20
+
+#define ISDN_P_B_RAW		0x21
+#define ISDN_P_B_HDLC		0x22
+#define ISDN_P_B_X75SLP		0x23
+#define ISDN_P_B_L2DTMF		0x24
+#define ISDN_P_B_L2DSP		0x25
+#define ISDN_P_B_L2DSPHDLC	0x26
+
+#define OPTION_L2_PMX		1
+#define OPTION_L2_PTP		2
+#define OPTION_L2_FIXEDTEI	3
+#define OPTION_L2_CLEANUP	4
+
+/* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */
+#define MISDN_MAX_IDLEN		20
+
+struct mISDNhead {
+	unsigned int	prim;
+	unsigned int	id;
+}  __attribute__((packed));
+
+#define MISDN_HEADER_LEN	sizeof(struct mISDNhead)
+#define MAX_DATA_SIZE		2048
+#define MAX_DATA_MEM		(MAX_DATA_SIZE + MISDN_HEADER_LEN)
+#define MAX_DFRAME_LEN		260
+
+#define MISDN_ID_ADDR_MASK	0xFFFF
+#define MISDN_ID_TEI_MASK	0xFF00
+#define MISDN_ID_SAPI_MASK	0x00FF
+#define MISDN_ID_TEI_ANY	0x7F00
+
+#define MISDN_ID_ANY		0xFFFF
+#define MISDN_ID_NONE		0xFFFE
+
+#define GROUP_TEI		127
+#define TEI_SAPI		63
+#define CTRL_SAPI		0
+
+#define MISDN_CHMAP_SIZE	4
+
+#define SOL_MISDN	0
+
+struct sockaddr_mISDN {
+	sa_family_t    family;
+	unsigned char	dev;
+	unsigned char	channel;
+	unsigned char	sapi;
+	unsigned char	tei;
+};
+
+/* timer device ioctl */
+#define IMADDTIMER	_IOR('I', 64, int)
+#define IMDELTIMER	_IOR('I', 65, int)
+/* socket ioctls */
+#define	IMGETVERSION	_IOR('I', 66, int)
+#define	IMGETCOUNT	_IOR('I', 67, int)
+#define IMGETDEVINFO	_IOR('I', 68, int)
+#define IMCTRLREQ	_IOR('I', 69, int)
+#define IMCLEAR_L2	_IOR('I', 70, int)
+
+struct mISDNversion {
+	unsigned char	major;
+	unsigned char	minor;
+	unsigned short	release;
+};
+
+struct mISDN_devinfo {
+	u_int			id;
+	u_int			Dprotocols;
+	u_int			Bprotocols;
+	u_int			protocol;
+	u_long			channelmap[MISDN_CHMAP_SIZE];
+	u_int			nrbchan;
+	char			name[MISDN_MAX_IDLEN];
+};
+
+/* CONTROL_CHANNEL parameters */
+#define MISDN_CTRL_GETOP		0x0000
+#define MISDN_CTRL_LOOP			0x0001
+#define MISDN_CTRL_CONNECT		0x0002
+#define MISDN_CTRL_DISCONNECT		0x0004
+#define MISDN_CTRL_PCMCONNECT		0x0010
+#define MISDN_CTRL_PCMDISCONNECT	0x0020
+#define MISDN_CTRL_SETPEER		0x0040
+#define MISDN_CTRL_UNSETPEER		0x0080
+#define MISDN_CTRL_RX_OFF		0x0100
+#define MISDN_CTRL_HW_FEATURES_OP	0x2000
+#define MISDN_CTRL_HW_FEATURES		0x2001
+#define MISDN_CTRL_HFC_OP		0x4000
+#define MISDN_CTRL_HFC_PCM_CONN		0x4001
+#define MISDN_CTRL_HFC_PCM_DISC		0x4002
+#define MISDN_CTRL_HFC_CONF_JOIN	0x4003
+#define MISDN_CTRL_HFC_CONF_SPLIT	0x4004
+#define MISDN_CTRL_HFC_RECEIVE_OFF	0x4005
+#define MISDN_CTRL_HFC_RECEIVE_ON	0x4006
+#define MISDN_CTRL_HFC_ECHOCAN_ON 	0x4007
+#define MISDN_CTRL_HFC_ECHOCAN_OFF 	0x4008
+
+
+/* socket options */
+#define MISDN_TIME_STAMP		0x0001
+
+struct mISDN_ctrl_req {
+	int		op;
+	int		channel;
+	int		p1;
+	int		p2;
+};
+
+/* muxer options */
+#define MISDN_OPT_ALL		1
+#define MISDN_OPT_TEIMGR	2
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/net.h>
+#include <net/sock.h>
+#include <linux/completion.h>
+
+#define DEBUG_CORE		0x000000ff
+#define DEBUG_CORE_FUNC		0x00000002
+#define DEBUG_SOCKET		0x00000004
+#define DEBUG_MANAGER		0x00000008
+#define DEBUG_SEND_ERR		0x00000010
+#define DEBUG_MSG_THREAD	0x00000020
+#define DEBUG_QUEUE_FUNC	0x00000040
+#define DEBUG_L1		0x0000ff00
+#define DEBUG_L1_FSM		0x00000200
+#define DEBUG_L2		0x00ff0000
+#define DEBUG_L2_FSM		0x00020000
+#define DEBUG_L2_CTRL		0x00040000
+#define DEBUG_L2_RECV		0x00080000
+#define DEBUG_L2_TEI		0x00100000
+#define DEBUG_L2_TEIFSM		0x00200000
+#define DEBUG_TIMER		0x01000000
+
+#define mISDN_HEAD_P(s)		((struct mISDNhead *)&s->cb[0])
+#define mISDN_HEAD_PRIM(s)	(((struct mISDNhead *)&s->cb[0])->prim)
+#define mISDN_HEAD_ID(s)	(((struct mISDNhead *)&s->cb[0])->id)
+
+/* socket states */
+#define MISDN_OPEN	1
+#define MISDN_BOUND	2
+#define MISDN_CLOSED	3
+
+struct mISDNchannel;
+struct mISDNdevice;
+struct mISDNstack;
+
+struct channel_req {
+	u_int			protocol;
+	struct sockaddr_mISDN	adr;
+	struct mISDNchannel	*ch;
+};
+
+typedef	int	(ctrl_func_t)(struct mISDNchannel *, u_int, void *);
+typedef	int	(send_func_t)(struct mISDNchannel *, struct sk_buff *);
+typedef int	(create_func_t)(struct channel_req *);
+
+struct Bprotocol {
+	struct list_head	list;
+	char			*name;
+	u_int			Bprotocols;
+	create_func_t		*create;
+};
+
+struct mISDNchannel {
+	struct list_head	list;
+	u_int			protocol;
+	u_int			nr;
+	u_long			opt;
+	u_int			addr;
+	struct mISDNstack	*st;
+	struct mISDNchannel	*peer;
+	send_func_t		*send;
+	send_func_t		*recv;
+	ctrl_func_t		*ctrl;
+};
+
+struct mISDN_sock_list {
+	struct hlist_head	head;
+	rwlock_t		lock;
+};
+
+struct mISDN_sock {
+	struct sock		sk;
+	struct mISDNchannel	ch;
+	u_int			cmask;
+	struct mISDNdevice	*dev;
+};
+
+
+
+struct mISDNdevice {
+	struct mISDNchannel	D;
+	u_int			id;
+	char			name[MISDN_MAX_IDLEN];
+	u_int			Dprotocols;
+	u_int			Bprotocols;
+	u_int			nrbchan;
+	u_long			channelmap[MISDN_CHMAP_SIZE];
+	struct list_head	bchannels;
+	struct mISDNchannel	*teimgr;
+	struct device		dev;
+};
+
+struct mISDNstack {
+	u_long			status;
+	struct mISDNdevice	*dev;
+	struct task_struct	*thread;
+	struct completion	*notify;
+	wait_queue_head_t	workq;
+	struct sk_buff_head	msgq;
+	struct list_head	layer2;
+	struct mISDNchannel	*layer1;
+	struct mISDNchannel	own;
+	struct mutex		lmutex; /* protect lists */
+	struct mISDN_sock_list	l1sock;
+#ifdef MISDN_MSG_STATS
+	u_int			msg_cnt;
+	u_int			sleep_cnt;
+	u_int			stopped_cnt;
+#endif
+};
+
+/* global alloc/queue dunctions */
+
+static inline struct sk_buff *
+mI_alloc_skb(unsigned int len, gfp_t gfp_mask)
+{
+	struct sk_buff	*skb;
+
+	skb = alloc_skb(len + MISDN_HEADER_LEN, gfp_mask);
+	if (likely(skb))
+		skb_reserve(skb, MISDN_HEADER_LEN);
+	return skb;
+}
+
+static inline struct sk_buff *
+_alloc_mISDN_skb(u_int prim, u_int id, u_int len, void *dp, gfp_t gfp_mask)
+{
+	struct sk_buff	*skb = mI_alloc_skb(len, gfp_mask);
+	struct mISDNhead *hh;
+
+	if (!skb)
+		return NULL;
+	if (len)
+		memcpy(skb_put(skb, len), dp, len);
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = id;
+	return skb;
+}
+
+static inline void
+_queue_data(struct mISDNchannel *ch, u_int prim,
+    u_int id, u_int len, void *dp, gfp_t gfp_mask)
+{
+	struct sk_buff		*skb;
+
+	if (!ch->peer)
+		return;
+	skb = _alloc_mISDN_skb(prim, id, len, dp, gfp_mask);
+	if (!skb)
+		return;
+	if (ch->recv(ch->peer, skb))
+		dev_kfree_skb(skb);
+}
+
+/* global register/unregister functions */
+
+extern int	mISDN_register_device(struct mISDNdevice *, char *name);
+extern void	mISDN_unregister_device(struct mISDNdevice *);
+extern int	mISDN_register_Bprotocol(struct Bprotocol *);
+extern void	mISDN_unregister_Bprotocol(struct Bprotocol *);
+
+extern void	set_channel_address(struct mISDNchannel *, u_int, u_int);
+
+#endif /* __KERNEL__ */
+#endif /* mISDNIF_H */
-- 
cgit v1.2.3


From 960366cf8dbb3359afaca30cf7fdbf69a6d6dda7 Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sun, 27 Jul 2008 01:56:38 +0200
Subject: Add mISDN DSP

Enable support for digital audio processing capability.
This module may be used for special applications that require
cross connecting of bchannels, conferencing, dtmf decoding
echo cancelation, tone generation, and Blowfish encryption and
decryption.
It may use hardware features if available.

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/mISDN/Kconfig        |   18 +
 drivers/isdn/mISDN/Makefile       |    2 +
 drivers/isdn/mISDN/dsp.h          |  263 ++++++
 drivers/isdn/mISDN/dsp_audio.c    |  434 +++++++++
 drivers/isdn/mISDN/dsp_biquad.h   |   65 ++
 drivers/isdn/mISDN/dsp_blowfish.c |  672 +++++++++++++
 drivers/isdn/mISDN/dsp_cmx.c      | 1886 +++++++++++++++++++++++++++++++++++++
 drivers/isdn/mISDN/dsp_core.c     | 1191 +++++++++++++++++++++++
 drivers/isdn/mISDN/dsp_dtmf.c     |  303 ++++++
 drivers/isdn/mISDN/dsp_ecdis.h    |  110 +++
 drivers/isdn/mISDN/dsp_hwec.c     |  138 +++
 drivers/isdn/mISDN/dsp_hwec.h     |   10 +
 drivers/isdn/mISDN/dsp_pipeline.c |  348 +++++++
 drivers/isdn/mISDN/dsp_tones.c    |  551 +++++++++++
 include/linux/mISDNdsp.h          |   37 +
 15 files changed, 6028 insertions(+)
 create mode 100644 drivers/isdn/mISDN/dsp.h
 create mode 100644 drivers/isdn/mISDN/dsp_audio.c
 create mode 100644 drivers/isdn/mISDN/dsp_biquad.h
 create mode 100644 drivers/isdn/mISDN/dsp_blowfish.c
 create mode 100644 drivers/isdn/mISDN/dsp_cmx.c
 create mode 100644 drivers/isdn/mISDN/dsp_core.c
 create mode 100644 drivers/isdn/mISDN/dsp_dtmf.c
 create mode 100644 drivers/isdn/mISDN/dsp_ecdis.h
 create mode 100644 drivers/isdn/mISDN/dsp_hwec.c
 create mode 100644 drivers/isdn/mISDN/dsp_hwec.h
 create mode 100644 drivers/isdn/mISDN/dsp_pipeline.c
 create mode 100644 drivers/isdn/mISDN/dsp_tones.c
 create mode 100644 include/linux/mISDNdsp.h

diff --git a/drivers/isdn/mISDN/Kconfig b/drivers/isdn/mISDN/Kconfig
index 231bd0d0831..6a97e86e7f2 100644
--- a/drivers/isdn/mISDN/Kconfig
+++ b/drivers/isdn/mISDN/Kconfig
@@ -7,3 +7,21 @@ menuconfig MISDN
 	help
 	  Enable support for the modular ISDN driver.
 
+if MISDN != n
+
+config MISDN_DSP
+	tristate "Digital Audio Processing of transparent data"
+	depends on MISDN
+	help
+	  Enable support for digital audio processing capability.
+	  This module may be used for special applications that require
+	  cross connecting of bchannels, conferencing, dtmf decoding
+	  echo cancelation, tone generation, and Blowfish encryption and
+	  decryption.
+	  It may use hardware features if available.
+	  E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
+	  and get more informations about this module and it's usage.
+	  If unsure, say 'N'.
+
+	source "drivers/isdn/hardware/mISDN/Kconfig"
+endif #MISDN
diff --git a/drivers/isdn/mISDN/Makefile b/drivers/isdn/mISDN/Makefile
index 87c563d3361..7f1a2180420 100644
--- a/drivers/isdn/mISDN/Makefile
+++ b/drivers/isdn/mISDN/Makefile
@@ -3,7 +3,9 @@
 #
 
 obj-$(CONFIG_MISDN) += mISDN_core.o
+obj-$(CONFIG_MISDN_DSP) += mISDN_dsp.o
 
 # multi objects
 
 mISDN_core-objs := core.o fsm.o socket.o hwchannel.o stack.o layer1.o layer2.o tei.o timerdev.o
+mISDN_dsp-objs := dsp_core.o dsp_cmx.o dsp_tones.o dsp_dtmf.o dsp_audio.o dsp_blowfish.o dsp_pipeline.o dsp_hwec.o
diff --git a/drivers/isdn/mISDN/dsp.h b/drivers/isdn/mISDN/dsp.h
new file mode 100644
index 00000000000..6c3fed6b8d4
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp.h
@@ -0,0 +1,263 @@
+/*
+ * Audio support data for ISDN4Linux.
+ *
+ * Copyright 2002/2003 by Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#define DEBUG_DSP_CTRL		0x0001
+#define DEBUG_DSP_CORE		0x0002
+#define DEBUG_DSP_DTMF		0x0004
+#define DEBUG_DSP_CMX		0x0010
+#define DEBUG_DSP_TONE		0x0020
+#define DEBUG_DSP_BLOWFISH	0x0040
+#define DEBUG_DSP_DELAY		0x0100
+#define DEBUG_DSP_DTMFCOEFF	0x8000 /* heavy output */
+
+/* options may be:
+ *
+ * bit 0 = use ulaw instead of alaw
+ * bit 1 = enable hfc hardware accelleration for all channels
+ *
+ */
+#define DSP_OPT_ULAW		(1<<0)
+#define DSP_OPT_NOHARDWARE	(1<<1)
+
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+
+#include "dsp_ecdis.h"
+
+extern int dsp_options;
+extern int dsp_debug;
+extern int dsp_poll;
+extern int dsp_tics;
+extern spinlock_t dsp_lock;
+extern struct work_struct dsp_workq;
+extern u32 dsp_poll_diff; /* calculated fix-comma corrected poll value */
+
+/***************
+ * audio stuff *
+ ***************/
+
+extern s32 dsp_audio_alaw_to_s32[256];
+extern s32 dsp_audio_ulaw_to_s32[256];
+extern s32 *dsp_audio_law_to_s32;
+extern u8 dsp_audio_s16_to_law[65536];
+extern u8 dsp_audio_alaw_to_ulaw[256];
+extern u8 dsp_audio_mix_law[65536];
+extern u8 dsp_audio_seven2law[128];
+extern u8 dsp_audio_law2seven[256];
+extern void dsp_audio_generate_law_tables(void);
+extern void dsp_audio_generate_s2law_table(void);
+extern void dsp_audio_generate_seven(void);
+extern void dsp_audio_generate_mix_table(void);
+extern void dsp_audio_generate_ulaw_samples(void);
+extern void dsp_audio_generate_volume_changes(void);
+extern u8 dsp_silence;
+
+
+/*************
+ * cmx stuff *
+ *************/
+
+#define MAX_POLL	256	/* maximum number of send-chunks */
+
+#define CMX_BUFF_SIZE	0x8000	/* must be 2**n (0x1000 about 1/2 second) */
+#define CMX_BUFF_HALF	0x4000	/* CMX_BUFF_SIZE / 2 */
+#define CMX_BUFF_MASK	0x7fff	/* CMX_BUFF_SIZE - 1 */
+
+/* how many seconds will we check the lowest delay until the jitter buffer
+   is reduced by that delay */
+#define MAX_SECONDS_JITTER_CHECK 5
+
+extern struct timer_list dsp_spl_tl;
+extern u32 dsp_spl_jiffies;
+
+/* the structure of conferences:
+ *
+ * each conference has a unique number, given by user space.
+ * the conferences are linked in a chain.
+ * each conference has members linked in a chain.
+ * each dsplayer points to a member, each member points to a dsplayer.
+ */
+
+/* all members within a conference (this is linked 1:1 with the dsp) */
+struct dsp;
+struct dsp_conf_member {
+	struct list_head	list;
+	struct dsp		*dsp;
+};
+
+/* the list of all conferences */
+struct dsp_conf {
+	struct list_head	list;
+	u32			id;
+				/* all cmx stacks with the same ID are
+				 connected */
+	struct list_head	mlist;
+	int			software; /* conf is processed by software */
+	int			hardware; /* conf is processed by hardware */
+				/* note: if both unset, has only one member */
+};
+
+
+/**************
+ * DTMF stuff *
+ **************/
+
+#define DSP_DTMF_NPOINTS 102
+
+#define ECHOCAN_BUFLEN (4*128)
+
+struct dsp_dtmf {
+	int		treshold; /* above this is dtmf (square of) */
+	int		software; /* dtmf uses software decoding */
+	int		hardware; /* dtmf uses hardware decoding */
+	int		size; /* number of bytes in buffer */
+	signed short	buffer[DSP_DTMF_NPOINTS];
+		/* buffers one full dtmf frame */
+	u8		lastwhat, lastdigit;
+	int		count;
+	u8		digits[16]; /* just the dtmf result */
+};
+
+
+/******************
+ * pipeline stuff *
+ ******************/
+struct dsp_pipeline {
+	rwlock_t  lock;
+	struct list_head list;
+	int inuse;
+};
+
+/***************
+ * tones stuff *
+ ***************/
+
+struct dsp_tone {
+	int		software; /* tones are generated by software */
+	int		hardware; /* tones are generated by hardware */
+	int		tone;
+	void		*pattern;
+	int		count;
+	int		index;
+	struct timer_list tl;
+};
+
+/*****************
+ * general stuff *
+ *****************/
+
+struct dsp {
+	struct list_head list;
+	struct mISDNchannel	ch;
+	struct mISDNchannel	*up;
+	unsigned char	name[64];
+	int		b_active;
+	int		echo; /* echo is enabled */
+	int		rx_disabled; /* what the user wants */
+	int		rx_is_off; /* what the card is */
+	int		tx_mix;
+	struct dsp_tone	tone;
+	struct dsp_dtmf	dtmf;
+	int		tx_volume, rx_volume;
+
+	/* queue for sending frames */
+	struct work_struct	workq;
+	struct sk_buff_head	sendq;
+	int		hdlc;	/* if mode is hdlc */
+	int		data_pending;	/* currently an unconfirmed frame */
+
+	/* conference stuff */
+	u32		conf_id;
+	struct dsp_conf	*conf;
+	struct dsp_conf_member
+			*member;
+
+	/* buffer stuff */
+	int		rx_W; /* current write pos for data without timestamp */
+	int		rx_R; /* current read pos for transmit clock */
+	int		rx_init; /* if set, pointers will be adjusted first */
+	int		tx_W; /* current write pos for transmit data */
+	int		tx_R; /* current read pos for transmit clock */
+	int		rx_delay[MAX_SECONDS_JITTER_CHECK];
+	int		tx_delay[MAX_SECONDS_JITTER_CHECK];
+	u8		tx_buff[CMX_BUFF_SIZE];
+	u8		rx_buff[CMX_BUFF_SIZE];
+	int		last_tx; /* if set, we transmitted last poll interval */
+	int		cmx_delay; /* initial delay of buffers,
+				or 0 for dynamic jitter buffer */
+	int		tx_dejitter; /* if set, dejitter tx buffer */
+	int		tx_data; /* enables tx-data of CMX to upper layer */
+
+	/* hardware stuff */
+	struct dsp_features features;
+	int		features_rx_off; /* set if rx_off is featured */
+	int		pcm_slot_rx; /* current PCM slot (or -1) */
+	int		pcm_bank_rx;
+	int		pcm_slot_tx;
+	int		pcm_bank_tx;
+	int		hfc_conf; /* unique id of current conference (or -1) */
+
+	/* encryption stuff */
+	int		bf_enable;
+	u32		bf_p[18];
+	u32		bf_s[1024];
+	int		bf_crypt_pos;
+	u8		bf_data_in[9];
+	u8		bf_crypt_out[9];
+	int		bf_decrypt_in_pos;
+	int		bf_decrypt_out_pos;
+	u8		bf_crypt_inring[16];
+	u8		bf_data_out[9];
+	int		bf_sync;
+
+	struct dsp_pipeline
+			pipeline;
+};
+
+/* functions */
+
+extern void dsp_change_volume(struct sk_buff *skb, int volume);
+
+extern struct list_head dsp_ilist;
+extern struct list_head conf_ilist;
+extern void dsp_cmx_debug(struct dsp *dsp);
+extern void dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp);
+extern int dsp_cmx_conf(struct dsp *dsp, u32 conf_id);
+extern void dsp_cmx_receive(struct dsp *dsp, struct sk_buff *skb);
+extern void dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb);
+extern void dsp_cmx_send(void *arg);
+extern void dsp_cmx_transmit(struct dsp *dsp, struct sk_buff *skb);
+extern int dsp_cmx_del_conf_member(struct dsp *dsp);
+extern int dsp_cmx_del_conf(struct dsp_conf *conf);
+
+extern void dsp_dtmf_goertzel_init(struct dsp *dsp);
+extern void dsp_dtmf_hardware(struct dsp *dsp);
+extern u8 *dsp_dtmf_goertzel_decode(struct dsp *dsp, u8 *data, int len,
+		int fmt);
+
+extern int dsp_tone(struct dsp *dsp, int tone);
+extern void dsp_tone_copy(struct dsp *dsp, u8 *data, int len);
+extern void dsp_tone_timeout(void *arg);
+
+extern void dsp_bf_encrypt(struct dsp *dsp, u8 *data, int len);
+extern void dsp_bf_decrypt(struct dsp *dsp, u8 *data, int len);
+extern int dsp_bf_init(struct dsp *dsp, const u8 *key, unsigned int keylen);
+extern void dsp_bf_cleanup(struct dsp *dsp);
+
+extern int  dsp_pipeline_module_init(void);
+extern void dsp_pipeline_module_exit(void);
+extern int  dsp_pipeline_init(struct dsp_pipeline *pipeline);
+extern void dsp_pipeline_destroy(struct dsp_pipeline *pipeline);
+extern int  dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg);
+extern void dsp_pipeline_process_tx(struct dsp_pipeline *pipeline, u8 *data,
+		int len);
+extern void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data,
+		int len);
+
diff --git a/drivers/isdn/mISDN/dsp_audio.c b/drivers/isdn/mISDN/dsp_audio.c
new file mode 100644
index 00000000000..1c2dd569477
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_audio.c
@@ -0,0 +1,434 @@
+/*
+ * Audio support data for mISDN_dsp.
+ *
+ * Copyright 2002/2003 by Andreas Eversberg (jolly@eversberg.eu)
+ * Rewritten by Peter
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+
+/* ulaw[unsigned char] -> signed 16-bit */
+s32 dsp_audio_ulaw_to_s32[256];
+/* alaw[unsigned char] -> signed 16-bit */
+s32 dsp_audio_alaw_to_s32[256];
+
+s32 *dsp_audio_law_to_s32;
+EXPORT_SYMBOL(dsp_audio_law_to_s32);
+
+/* signed 16-bit -> law */
+u8 dsp_audio_s16_to_law[65536];
+EXPORT_SYMBOL(dsp_audio_s16_to_law);
+
+/* alaw -> ulaw */
+u8 dsp_audio_alaw_to_ulaw[256];
+/* ulaw -> alaw */
+u8 dsp_audio_ulaw_to_alaw[256];
+u8 dsp_silence;
+
+
+/*****************************************************
+ * generate table for conversion of s16 to alaw/ulaw *
+ *****************************************************/
+
+#define AMI_MASK 0x55
+
+static inline unsigned char linear2alaw(short int linear)
+{
+	int mask;
+	int seg;
+	int pcm_val;
+	static int seg_end[8] = {
+		0xFF, 0x1FF, 0x3FF, 0x7FF, 0xFFF, 0x1FFF, 0x3FFF, 0x7FFF
+	};
+
+	pcm_val = linear;
+	if (pcm_val >= 0) {
+		/* Sign (7th) bit = 1 */
+		mask = AMI_MASK | 0x80;
+	} else {
+		/* Sign bit = 0 */
+		mask = AMI_MASK;
+		pcm_val = -pcm_val;
+	}
+
+	/* Convert the scaled magnitude to segment number. */
+	for (seg = 0;  seg < 8;  seg++) {
+		if (pcm_val <= seg_end[seg])
+			break;
+	}
+	/* Combine the sign, segment, and quantization bits. */
+	return  ((seg << 4) |
+		 ((pcm_val >> ((seg)  ?  (seg + 3)  :  4)) & 0x0F)) ^ mask;
+}
+
+
+static inline short int alaw2linear(unsigned char alaw)
+{
+	int i;
+	int seg;
+
+	alaw ^= AMI_MASK;
+	i = ((alaw & 0x0F) << 4) + 8 /* rounding error */;
+	seg = (((int) alaw & 0x70) >> 4);
+	if (seg)
+		i = (i + 0x100) << (seg - 1);
+	return (short int) ((alaw & 0x80)  ?  i  :  -i);
+}
+
+static inline short int ulaw2linear(unsigned char ulaw)
+{
+	short mu, e, f, y;
+	static short etab[] = {0, 132, 396, 924, 1980, 4092, 8316, 16764};
+
+	mu = 255 - ulaw;
+	e = (mu & 0x70) / 16;
+	f = mu & 0x0f;
+	y = f * (1 << (e + 3));
+	y += etab[e];
+	if (mu & 0x80)
+		y = -y;
+	return y;
+}
+
+#define BIAS 0x84   /*!< define the add-in bias for 16 bit samples */
+
+static unsigned char linear2ulaw(short sample)
+{
+	static int exp_lut[256] = {
+		0, 0, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
+		4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+		5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+		5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+		6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+		6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+		6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+		6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+		7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7};
+	int sign, exponent, mantissa;
+	unsigned char ulawbyte;
+
+	/* Get the sample into sign-magnitude. */
+	sign = (sample >> 8) & 0x80;	  /* set aside the sign */
+	if (sign != 0)
+		sample = -sample;	      /* get magnitude */
+
+	/* Convert from 16 bit linear to ulaw. */
+	sample = sample + BIAS;
+	exponent = exp_lut[(sample >> 7) & 0xFF];
+	mantissa = (sample >> (exponent + 3)) & 0x0F;
+	ulawbyte = ~(sign | (exponent << 4) | mantissa);
+
+	return ulawbyte;
+}
+
+static int reverse_bits(int i)
+{
+	int z, j;
+	z = 0;
+
+	for (j = 0; j < 8; j++) {
+		if ((i & (1 << j)) != 0)
+			z |= 1 << (7 - j);
+	}
+	return z;
+}
+
+
+void dsp_audio_generate_law_tables(void)
+{
+	int i;
+	for (i = 0; i < 256; i++)
+		dsp_audio_alaw_to_s32[i] = alaw2linear(reverse_bits(i));
+
+	for (i = 0; i < 256; i++)
+		dsp_audio_ulaw_to_s32[i] = ulaw2linear(reverse_bits(i));
+
+	for (i = 0; i < 256; i++) {
+		dsp_audio_alaw_to_ulaw[i] =
+			linear2ulaw(dsp_audio_alaw_to_s32[i]);
+		dsp_audio_ulaw_to_alaw[i] =
+			linear2alaw(dsp_audio_ulaw_to_s32[i]);
+	}
+}
+
+void
+dsp_audio_generate_s2law_table(void)
+{
+	int i;
+
+	if (dsp_options & DSP_OPT_ULAW) {
+		/* generating ulaw-table */
+		for (i = -32768; i < 32768; i++) {
+			dsp_audio_s16_to_law[i & 0xffff] =
+				reverse_bits(linear2ulaw(i));
+		}
+	} else {
+		/* generating alaw-table */
+		for (i = -32768; i < 32768; i++) {
+			dsp_audio_s16_to_law[i & 0xffff] =
+				reverse_bits(linear2alaw(i));
+		}
+	}
+}
+
+
+/*
+ * the seven bit sample is the number of every second alaw-sample ordered by
+ * aplitude. 0x00 is negative, 0x7f is positive amplitude.
+ */
+u8 dsp_audio_seven2law[128];
+u8 dsp_audio_law2seven[256];
+
+/********************************************************************
+ * generate table for conversion law from/to 7-bit alaw-like sample *
+ ********************************************************************/
+
+void
+dsp_audio_generate_seven(void)
+{
+	int i, j, k;
+	u8 spl;
+	u8 sorted_alaw[256];
+
+	/* generate alaw table, sorted by the linear value */
+	for (i = 0; i < 256; i++) {
+		j = 0;
+		for (k = 0; k < 256; k++) {
+			if (dsp_audio_alaw_to_s32[k]
+				< dsp_audio_alaw_to_s32[i]) {
+			j++;
+			}
+		}
+		sorted_alaw[j] = i;
+	}
+
+	/* generate tabels */
+	for (i = 0; i < 256; i++) {
+		/* spl is the source: the law-sample (converted to alaw) */
+		spl = i;
+		if (dsp_options & DSP_OPT_ULAW)
+			spl = dsp_audio_ulaw_to_alaw[i];
+		/* find the 7-bit-sample */
+		for (j = 0; j < 256; j++) {
+			if (sorted_alaw[j] == spl)
+				break;
+		}
+		/* write 7-bit audio value */
+		dsp_audio_law2seven[i] = j >> 1;
+	}
+	for (i = 0; i < 128; i++) {
+		spl = sorted_alaw[i << 1];
+		if (dsp_options & DSP_OPT_ULAW)
+			spl = dsp_audio_alaw_to_ulaw[spl];
+		dsp_audio_seven2law[i] = spl;
+	}
+}
+
+
+/* mix 2*law -> law */
+u8 dsp_audio_mix_law[65536];
+
+/******************************************************
+ * generate mix table to mix two law samples into one *
+ ******************************************************/
+
+void
+dsp_audio_generate_mix_table(void)
+{
+	int i, j;
+	s32 sample;
+
+	i = 0;
+	while (i < 256) {
+		j = 0;
+		while (j < 256) {
+			sample = dsp_audio_law_to_s32[i];
+			sample += dsp_audio_law_to_s32[j];
+			if (sample > 32767)
+				sample = 32767;
+			if (sample < -32768)
+				sample = -32768;
+			dsp_audio_mix_law[(i<<8)|j] =
+				dsp_audio_s16_to_law[sample & 0xffff];
+			j++;
+		}
+		i++;
+	}
+}
+
+
+/*************************************
+ * generate different volume changes *
+ *************************************/
+
+static u8 dsp_audio_reduce8[256];
+static u8 dsp_audio_reduce7[256];
+static u8 dsp_audio_reduce6[256];
+static u8 dsp_audio_reduce5[256];
+static u8 dsp_audio_reduce4[256];
+static u8 dsp_audio_reduce3[256];
+static u8 dsp_audio_reduce2[256];
+static u8 dsp_audio_reduce1[256];
+static u8 dsp_audio_increase1[256];
+static u8 dsp_audio_increase2[256];
+static u8 dsp_audio_increase3[256];
+static u8 dsp_audio_increase4[256];
+static u8 dsp_audio_increase5[256];
+static u8 dsp_audio_increase6[256];
+static u8 dsp_audio_increase7[256];
+static u8 dsp_audio_increase8[256];
+
+static u8 *dsp_audio_volume_change[16] = {
+	dsp_audio_reduce8,
+	dsp_audio_reduce7,
+	dsp_audio_reduce6,
+	dsp_audio_reduce5,
+	dsp_audio_reduce4,
+	dsp_audio_reduce3,
+	dsp_audio_reduce2,
+	dsp_audio_reduce1,
+	dsp_audio_increase1,
+	dsp_audio_increase2,
+	dsp_audio_increase3,
+	dsp_audio_increase4,
+	dsp_audio_increase5,
+	dsp_audio_increase6,
+	dsp_audio_increase7,
+	dsp_audio_increase8,
+};
+
+void
+dsp_audio_generate_volume_changes(void)
+{
+	register s32 sample;
+	int i;
+	int num[]   = { 110, 125, 150, 175, 200, 300, 400, 500 };
+	int denum[] = { 100, 100, 100, 100, 100, 100, 100, 100 };
+
+	i = 0;
+	while (i < 256) {
+		dsp_audio_reduce8[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[7] / num[7]) & 0xffff];
+		dsp_audio_reduce7[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[6] / num[6]) & 0xffff];
+		dsp_audio_reduce6[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[5] / num[5]) & 0xffff];
+		dsp_audio_reduce5[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[4] / num[4]) & 0xffff];
+		dsp_audio_reduce4[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[3] / num[3]) & 0xffff];
+		dsp_audio_reduce3[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[2] / num[2]) & 0xffff];
+		dsp_audio_reduce2[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[1] / num[1]) & 0xffff];
+		dsp_audio_reduce1[i] = dsp_audio_s16_to_law[
+			(dsp_audio_law_to_s32[i] * denum[0] / num[0]) & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[0] / denum[0];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase1[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[1] / denum[1];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase2[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[2] / denum[2];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase3[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[3] / denum[3];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase4[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[4] / denum[4];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase5[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[5] / denum[5];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase6[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[6] / denum[6];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase7[i] = dsp_audio_s16_to_law[sample & 0xffff];
+		sample = dsp_audio_law_to_s32[i] * num[7] / denum[7];
+		if (sample < -32768)
+			sample = -32768;
+		else if (sample > 32767)
+			sample = 32767;
+		dsp_audio_increase8[i] = dsp_audio_s16_to_law[sample & 0xffff];
+
+		i++;
+	}
+}
+
+
+/**************************************
+ * change the volume of the given skb *
+ **************************************/
+
+/* this is a helper function for changing volume of skb. the range may be
+ * -8 to 8, which is a shift to the power of 2. 0 == no volume, 3 == volume*8
+ */
+void
+dsp_change_volume(struct sk_buff *skb, int volume)
+{
+	u8 *volume_change;
+	int i, ii;
+	u8 *p;
+	int shift;
+
+	if (volume == 0)
+		return;
+
+	/* get correct conversion table */
+	if (volume < 0) {
+		shift = volume + 8;
+		if (shift < 0)
+			shift = 0;
+	} else {
+		shift = volume + 7;
+		if (shift > 15)
+			shift = 15;
+	}
+	volume_change = dsp_audio_volume_change[shift];
+	i = 0;
+	ii = skb->len;
+	p = skb->data;
+	/* change volume */
+	while (i < ii) {
+		*p = volume_change[*p];
+		p++;
+		i++;
+	}
+}
+
diff --git a/drivers/isdn/mISDN/dsp_biquad.h b/drivers/isdn/mISDN/dsp_biquad.h
new file mode 100644
index 00000000000..038191bc45f
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_biquad.h
@@ -0,0 +1,65 @@
+/*
+ * SpanDSP - a series of DSP components for telephony
+ *
+ * biquad.h - General telephony bi-quad section routines (currently this just
+ *            handles canonic/type 2 form)
+ *
+ * Written by Steve Underwood <steveu@coppice.org>
+ *
+ * Copyright (C) 2001 Steve Underwood
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+struct biquad2_state {
+	int32_t gain;
+	int32_t a1;
+	int32_t a2;
+	int32_t b1;
+	int32_t b2;
+
+	int32_t z1;
+	int32_t z2;
+};
+
+static inline void biquad2_init(struct biquad2_state *bq,
+    int32_t gain, int32_t a1, int32_t a2, int32_t b1, int32_t b2)
+{
+	bq->gain = gain;
+	bq->a1 = a1;
+	bq->a2 = a2;
+	bq->b1 = b1;
+	bq->b2 = b2;
+
+	bq->z1 = 0;
+	bq->z2 = 0;
+}
+
+static inline int16_t biquad2(struct biquad2_state *bq, int16_t sample)
+{
+	int32_t y;
+	int32_t z0;
+
+	z0 = sample*bq->gain + bq->z1*bq->a1 + bq->z2*bq->a2;
+	y = z0 + bq->z1*bq->b1 + bq->z2*bq->b2;
+
+	bq->z2 = bq->z1;
+	bq->z1 = z0 >> 15;
+	y >>= 15;
+	return  y;
+}
diff --git a/drivers/isdn/mISDN/dsp_blowfish.c b/drivers/isdn/mISDN/dsp_blowfish.c
new file mode 100644
index 00000000000..18e411e95bb
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_blowfish.c
@@ -0,0 +1,672 @@
+/*
+ * Blowfish encryption/decryption for mISDN_dsp.
+ *
+ * Copyright Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+
+/*
+ * how to encode a sample stream to 64-bit blocks that will be encryped
+ *
+ * first of all, data is collected until a block of 9 samples are received.
+ * of course, a packet may have much more than 9 sample, but is may have
+ * not excacly the multiple of 9 samples. if there is a rest, the next
+ * received data will complete the block.
+ *
+ * the block is then converted to 9 uLAW samples without the least sigificant
+ * bit. the result is a 7-bit encoded sample.
+ *
+ * the samples will be reoganised to form 8 bytes of data:
+ * (5(6) means: encoded sample no. 5, bit 6)
+ *
+ * 0(6) 0(5) 0(4) 0(3) 0(2) 0(1) 0(0) 1(6)
+ * 1(5) 1(4) 1(3) 1(2) 1(1) 1(0) 2(6) 2(5)
+ * 2(4) 2(3) 2(2) 2(1) 2(0) 3(6) 3(5) 3(4)
+ * 3(3) 3(2) 3(1) 3(0) 4(6) 4(5) 4(4) 4(3)
+ * 4(2) 4(1) 4(0) 5(6) 5(5) 5(4) 5(3) 5(2)
+ * 5(1) 5(0) 6(6) 6(5) 6(4) 6(3) 6(2) 6(1)
+ * 6(0) 7(6) 7(5) 7(4) 7(3) 7(2) 7(1) 7(0)
+ * 8(6) 8(5) 8(4) 8(3) 8(2) 8(1) 8(0)
+ *
+ * the missing bit 0 of the last byte is filled with some
+ * random noise, to fill all 8 bytes.
+ *
+ * the 8 bytes will be encrypted using blowfish.
+ *
+ * the result will be converted into 9 bytes. the bit 7 is used for
+ * checksumme (CS) for sync (0, 1) and for the last bit:
+ * (5(6) means: crypted byte 5, bit 6)
+ *
+ * 1    0(7) 0(6) 0(5) 0(4) 0(3) 0(2) 0(1)
+ * 0    0(0) 1(7) 1(6) 1(5) 1(4) 1(3) 1(2)
+ * 0    1(1) 1(0) 2(7) 2(6) 2(5) 2(4) 2(3)
+ * 0    2(2) 2(1) 2(0) 3(7) 3(6) 3(5) 3(4)
+ * 0    3(3) 3(2) 3(1) 3(0) 4(7) 4(6) 4(5)
+ * CS   4(4) 4(3) 4(2) 4(1) 4(0) 5(7) 5(6)
+ * CS   5(5) 5(4) 5(3) 5(2) 5(1) 5(0) 6(7)
+ * CS   6(6) 6(5) 6(4) 6(3) 6(2) 6(1) 6(0)
+ * 7(0) 7(6) 7(5) 7(4) 7(3) 7(2) 7(1) 7(0)
+ *
+ * the checksum is used to detect transmission errors and frame drops.
+ *
+ * synchronisation of received block is done by shifting the upper bit of each
+ * byte (bit 7) to a shift register. if the rigister has the first five bits
+ * (10000), this is used to find the sync. only if sync has been found, the
+ * current block of 9 received bytes are decrypted. before that the check
+ * sum is calculated. if it is incorrect the block is dropped.
+ * this will avoid loud noise due to corrupt encrypted data.
+ *
+ * if the last block is corrupt, the current decoded block is repeated
+ * until a valid block has been received.
+ */
+
+/*
+ *  some blowfish parts are taken from the
+ * crypto-api for faster implementation
+ */
+
+struct bf_ctx {
+	u32 p[18];
+	u32 s[1024];
+};
+
+static const u32 bf_pbox[16 + 2] = {
+	0x243f6a88, 0x85a308d3, 0x13198a2e, 0x03707344,
+	0xa4093822, 0x299f31d0, 0x082efa98, 0xec4e6c89,
+	0x452821e6, 0x38d01377, 0xbe5466cf, 0x34e90c6c,
+	0xc0ac29b7, 0xc97c50dd, 0x3f84d5b5, 0xb5470917,
+	0x9216d5d9, 0x8979fb1b,
+};
+
+static const u32 bf_sbox[256 * 4] = {
+	0xd1310ba6, 0x98dfb5ac, 0x2ffd72db, 0xd01adfb7,
+	0xb8e1afed, 0x6a267e96, 0xba7c9045, 0xf12c7f99,
+	0x24a19947, 0xb3916cf7, 0x0801f2e2, 0x858efc16,
+	0x636920d8, 0x71574e69, 0xa458fea3, 0xf4933d7e,
+	0x0d95748f, 0x728eb658, 0x718bcd58, 0x82154aee,
+	0x7b54a41d, 0xc25a59b5, 0x9c30d539, 0x2af26013,
+	0xc5d1b023, 0x286085f0, 0xca417918, 0xb8db38ef,
+	0x8e79dcb0, 0x603a180e, 0x6c9e0e8b, 0xb01e8a3e,
+	0xd71577c1, 0xbd314b27, 0x78af2fda, 0x55605c60,
+	0xe65525f3, 0xaa55ab94, 0x57489862, 0x63e81440,
+	0x55ca396a, 0x2aab10b6, 0xb4cc5c34, 0x1141e8ce,
+	0xa15486af, 0x7c72e993, 0xb3ee1411, 0x636fbc2a,
+	0x2ba9c55d, 0x741831f6, 0xce5c3e16, 0x9b87931e,
+	0xafd6ba33, 0x6c24cf5c, 0x7a325381, 0x28958677,
+	0x3b8f4898, 0x6b4bb9af, 0xc4bfe81b, 0x66282193,
+	0x61d809cc, 0xfb21a991, 0x487cac60, 0x5dec8032,
+	0xef845d5d, 0xe98575b1, 0xdc262302, 0xeb651b88,
+	0x23893e81, 0xd396acc5, 0x0f6d6ff3, 0x83f44239,
+	0x2e0b4482, 0xa4842004, 0x69c8f04a, 0x9e1f9b5e,
+	0x21c66842, 0xf6e96c9a, 0x670c9c61, 0xabd388f0,
+	0x6a51a0d2, 0xd8542f68, 0x960fa728, 0xab5133a3,
+	0x6eef0b6c, 0x137a3be4, 0xba3bf050, 0x7efb2a98,
+	0xa1f1651d, 0x39af0176, 0x66ca593e, 0x82430e88,
+	0x8cee8619, 0x456f9fb4, 0x7d84a5c3, 0x3b8b5ebe,
+	0xe06f75d8, 0x85c12073, 0x401a449f, 0x56c16aa6,
+	0x4ed3aa62, 0x363f7706, 0x1bfedf72, 0x429b023d,
+	0x37d0d724, 0xd00a1248, 0xdb0fead3, 0x49f1c09b,
+	0x075372c9, 0x80991b7b, 0x25d479d8, 0xf6e8def7,
+	0xe3fe501a, 0xb6794c3b, 0x976ce0bd, 0x04c006ba,
+	0xc1a94fb6, 0x409f60c4, 0x5e5c9ec2, 0x196a2463,
+	0x68fb6faf, 0x3e6c53b5, 0x1339b2eb, 0x3b52ec6f,
+	0x6dfc511f, 0x9b30952c, 0xcc814544, 0xaf5ebd09,
+	0xbee3d004, 0xde334afd, 0x660f2807, 0x192e4bb3,
+	0xc0cba857, 0x45c8740f, 0xd20b5f39, 0xb9d3fbdb,
+	0x5579c0bd, 0x1a60320a, 0xd6a100c6, 0x402c7279,
+	0x679f25fe, 0xfb1fa3cc, 0x8ea5e9f8, 0xdb3222f8,
+	0x3c7516df, 0xfd616b15, 0x2f501ec8, 0xad0552ab,
+	0x323db5fa, 0xfd238760, 0x53317b48, 0x3e00df82,
+	0x9e5c57bb, 0xca6f8ca0, 0x1a87562e, 0xdf1769db,
+	0xd542a8f6, 0x287effc3, 0xac6732c6, 0x8c4f5573,
+	0x695b27b0, 0xbbca58c8, 0xe1ffa35d, 0xb8f011a0,
+	0x10fa3d98, 0xfd2183b8, 0x4afcb56c, 0x2dd1d35b,
+	0x9a53e479, 0xb6f84565, 0xd28e49bc, 0x4bfb9790,
+	0xe1ddf2da, 0xa4cb7e33, 0x62fb1341, 0xcee4c6e8,
+	0xef20cada, 0x36774c01, 0xd07e9efe, 0x2bf11fb4,
+	0x95dbda4d, 0xae909198, 0xeaad8e71, 0x6b93d5a0,
+	0xd08ed1d0, 0xafc725e0, 0x8e3c5b2f, 0x8e7594b7,
+	0x8ff6e2fb, 0xf2122b64, 0x8888b812, 0x900df01c,
+	0x4fad5ea0, 0x688fc31c, 0xd1cff191, 0xb3a8c1ad,
+	0x2f2f2218, 0xbe0e1777, 0xea752dfe, 0x8b021fa1,
+	0xe5a0cc0f, 0xb56f74e8, 0x18acf3d6, 0xce89e299,
+	0xb4a84fe0, 0xfd13e0b7, 0x7cc43b81, 0xd2ada8d9,
+	0x165fa266, 0x80957705, 0x93cc7314, 0x211a1477,
+	0xe6ad2065, 0x77b5fa86, 0xc75442f5, 0xfb9d35cf,
+	0xebcdaf0c, 0x7b3e89a0, 0xd6411bd3, 0xae1e7e49,
+	0x00250e2d, 0x2071b35e, 0x226800bb, 0x57b8e0af,
+	0x2464369b, 0xf009b91e, 0x5563911d, 0x59dfa6aa,
+	0x78c14389, 0xd95a537f, 0x207d5ba2, 0x02e5b9c5,
+	0x83260376, 0x6295cfa9, 0x11c81968, 0x4e734a41,
+	0xb3472dca, 0x7b14a94a, 0x1b510052, 0x9a532915,
+	0xd60f573f, 0xbc9bc6e4, 0x2b60a476, 0x81e67400,
+	0x08ba6fb5, 0x571be91f, 0xf296ec6b, 0x2a0dd915,
+	0xb6636521, 0xe7b9f9b6, 0xff34052e, 0xc5855664,
+	0x53b02d5d, 0xa99f8fa1, 0x08ba4799, 0x6e85076a,
+	0x4b7a70e9, 0xb5b32944, 0xdb75092e, 0xc4192623,
+	0xad6ea6b0, 0x49a7df7d, 0x9cee60b8, 0x8fedb266,
+	0xecaa8c71, 0x699a17ff, 0x5664526c, 0xc2b19ee1,
+	0x193602a5, 0x75094c29, 0xa0591340, 0xe4183a3e,
+	0x3f54989a, 0x5b429d65, 0x6b8fe4d6, 0x99f73fd6,
+	0xa1d29c07, 0xefe830f5, 0x4d2d38e6, 0xf0255dc1,
+	0x4cdd2086, 0x8470eb26, 0x6382e9c6, 0x021ecc5e,
+	0x09686b3f, 0x3ebaefc9, 0x3c971814, 0x6b6a70a1,
+	0x687f3584, 0x52a0e286, 0xb79c5305, 0xaa500737,
+	0x3e07841c, 0x7fdeae5c, 0x8e7d44ec, 0x5716f2b8,
+	0xb03ada37, 0xf0500c0d, 0xf01c1f04, 0x0200b3ff,
+	0xae0cf51a, 0x3cb574b2, 0x25837a58, 0xdc0921bd,
+	0xd19113f9, 0x7ca92ff6, 0x94324773, 0x22f54701,
+	0x3ae5e581, 0x37c2dadc, 0xc8b57634, 0x9af3dda7,
+	0xa9446146, 0x0fd0030e, 0xecc8c73e, 0xa4751e41,
+	0xe238cd99, 0x3bea0e2f, 0x3280bba1, 0x183eb331,
+	0x4e548b38, 0x4f6db908, 0x6f420d03, 0xf60a04bf,
+	0x2cb81290, 0x24977c79, 0x5679b072, 0xbcaf89af,
+	0xde9a771f, 0xd9930810, 0xb38bae12, 0xdccf3f2e,
+	0x5512721f, 0x2e6b7124, 0x501adde6, 0x9f84cd87,
+	0x7a584718, 0x7408da17, 0xbc9f9abc, 0xe94b7d8c,
+	0xec7aec3a, 0xdb851dfa, 0x63094366, 0xc464c3d2,
+	0xef1c1847, 0x3215d908, 0xdd433b37, 0x24c2ba16,
+	0x12a14d43, 0x2a65c451, 0x50940002, 0x133ae4dd,
+	0x71dff89e, 0x10314e55, 0x81ac77d6, 0x5f11199b,
+	0x043556f1, 0xd7a3c76b, 0x3c11183b, 0x5924a509,
+	0xf28fe6ed, 0x97f1fbfa, 0x9ebabf2c, 0x1e153c6e,
+	0x86e34570, 0xeae96fb1, 0x860e5e0a, 0x5a3e2ab3,
+	0x771fe71c, 0x4e3d06fa, 0x2965dcb9, 0x99e71d0f,
+	0x803e89d6, 0x5266c825, 0x2e4cc978, 0x9c10b36a,
+	0xc6150eba, 0x94e2ea78, 0xa5fc3c53, 0x1e0a2df4,
+	0xf2f74ea7, 0x361d2b3d, 0x1939260f, 0x19c27960,
+	0x5223a708, 0xf71312b6, 0xebadfe6e, 0xeac31f66,
+	0xe3bc4595, 0xa67bc883, 0xb17f37d1, 0x018cff28,
+	0xc332ddef, 0xbe6c5aa5, 0x65582185, 0x68ab9802,
+	0xeecea50f, 0xdb2f953b, 0x2aef7dad, 0x5b6e2f84,
+	0x1521b628, 0x29076170, 0xecdd4775, 0x619f1510,
+	0x13cca830, 0xeb61bd96, 0x0334fe1e, 0xaa0363cf,
+	0xb5735c90, 0x4c70a239, 0xd59e9e0b, 0xcbaade14,
+	0xeecc86bc, 0x60622ca7, 0x9cab5cab, 0xb2f3846e,
+	0x648b1eaf, 0x19bdf0ca, 0xa02369b9, 0x655abb50,
+	0x40685a32, 0x3c2ab4b3, 0x319ee9d5, 0xc021b8f7,
+	0x9b540b19, 0x875fa099, 0x95f7997e, 0x623d7da8,
+	0xf837889a, 0x97e32d77, 0x11ed935f, 0x16681281,
+	0x0e358829, 0xc7e61fd6, 0x96dedfa1, 0x7858ba99,
+	0x57f584a5, 0x1b227263, 0x9b83c3ff, 0x1ac24696,
+	0xcdb30aeb, 0x532e3054, 0x8fd948e4, 0x6dbc3128,
+	0x58ebf2ef, 0x34c6ffea, 0xfe28ed61, 0xee7c3c73,
+	0x5d4a14d9, 0xe864b7e3, 0x42105d14, 0x203e13e0,
+	0x45eee2b6, 0xa3aaabea, 0xdb6c4f15, 0xfacb4fd0,
+	0xc742f442, 0xef6abbb5, 0x654f3b1d, 0x41cd2105,
+	0xd81e799e, 0x86854dc7, 0xe44b476a, 0x3d816250,
+	0xcf62a1f2, 0x5b8d2646, 0xfc8883a0, 0xc1c7b6a3,
+	0x7f1524c3, 0x69cb7492, 0x47848a0b, 0x5692b285,
+	0x095bbf00, 0xad19489d, 0x1462b174, 0x23820e00,
+	0x58428d2a, 0x0c55f5ea, 0x1dadf43e, 0x233f7061,
+	0x3372f092, 0x8d937e41, 0xd65fecf1, 0x6c223bdb,
+	0x7cde3759, 0xcbee7460, 0x4085f2a7, 0xce77326e,
+	0xa6078084, 0x19f8509e, 0xe8efd855, 0x61d99735,
+	0xa969a7aa, 0xc50c06c2, 0x5a04abfc, 0x800bcadc,
+	0x9e447a2e, 0xc3453484, 0xfdd56705, 0x0e1e9ec9,
+	0xdb73dbd3, 0x105588cd, 0x675fda79, 0xe3674340,
+	0xc5c43465, 0x713e38d8, 0x3d28f89e, 0xf16dff20,
+	0x153e21e7, 0x8fb03d4a, 0xe6e39f2b, 0xdb83adf7,
+	0xe93d5a68, 0x948140f7, 0xf64c261c, 0x94692934,
+	0x411520f7, 0x7602d4f7, 0xbcf46b2e, 0xd4a20068,
+	0xd4082471, 0x3320f46a, 0x43b7d4b7, 0x500061af,
+	0x1e39f62e, 0x97244546, 0x14214f74, 0xbf8b8840,
+	0x4d95fc1d, 0x96b591af, 0x70f4ddd3, 0x66a02f45,
+	0xbfbc09ec, 0x03bd9785, 0x7fac6dd0, 0x31cb8504,
+	0x96eb27b3, 0x55fd3941, 0xda2547e6, 0xabca0a9a,
+	0x28507825, 0x530429f4, 0x0a2c86da, 0xe9b66dfb,
+	0x68dc1462, 0xd7486900, 0x680ec0a4, 0x27a18dee,
+	0x4f3ffea2, 0xe887ad8c, 0xb58ce006, 0x7af4d6b6,
+	0xaace1e7c, 0xd3375fec, 0xce78a399, 0x406b2a42,
+	0x20fe9e35, 0xd9f385b9, 0xee39d7ab, 0x3b124e8b,
+	0x1dc9faf7, 0x4b6d1856, 0x26a36631, 0xeae397b2,
+	0x3a6efa74, 0xdd5b4332, 0x6841e7f7, 0xca7820fb,
+	0xfb0af54e, 0xd8feb397, 0x454056ac, 0xba489527,
+	0x55533a3a, 0x20838d87, 0xfe6ba9b7, 0xd096954b,
+	0x55a867bc, 0xa1159a58, 0xcca92963, 0x99e1db33,
+	0xa62a4a56, 0x3f3125f9, 0x5ef47e1c, 0x9029317c,
+	0xfdf8e802, 0x04272f70, 0x80bb155c, 0x05282ce3,
+	0x95c11548, 0xe4c66d22, 0x48c1133f, 0xc70f86dc,
+	0x07f9c9ee, 0x41041f0f, 0x404779a4, 0x5d886e17,
+	0x325f51eb, 0xd59bc0d1, 0xf2bcc18f, 0x41113564,
+	0x257b7834, 0x602a9c60, 0xdff8e8a3, 0x1f636c1b,
+	0x0e12b4c2, 0x02e1329e, 0xaf664fd1, 0xcad18115,
+	0x6b2395e0, 0x333e92e1, 0x3b240b62, 0xeebeb922,
+	0x85b2a20e, 0xe6ba0d99, 0xde720c8c, 0x2da2f728,
+	0xd0127845, 0x95b794fd, 0x647d0862, 0xe7ccf5f0,
+	0x5449a36f, 0x877d48fa, 0xc39dfd27, 0xf33e8d1e,
+	0x0a476341, 0x992eff74, 0x3a6f6eab, 0xf4f8fd37,
+	0xa812dc60, 0xa1ebddf8, 0x991be14c, 0xdb6e6b0d,
+	0xc67b5510, 0x6d672c37, 0x2765d43b, 0xdcd0e804,
+	0xf1290dc7, 0xcc00ffa3, 0xb5390f92, 0x690fed0b,
+	0x667b9ffb, 0xcedb7d9c, 0xa091cf0b, 0xd9155ea3,
+	0xbb132f88, 0x515bad24, 0x7b9479bf, 0x763bd6eb,
+	0x37392eb3, 0xcc115979, 0x8026e297, 0xf42e312d,
+	0x6842ada7, 0xc66a2b3b, 0x12754ccc, 0x782ef11c,
+	0x6a124237, 0xb79251e7, 0x06a1bbe6, 0x4bfb6350,
+	0x1a6b1018, 0x11caedfa, 0x3d25bdd8, 0xe2e1c3c9,
+	0x44421659, 0x0a121386, 0xd90cec6e, 0xd5abea2a,
+	0x64af674e, 0xda86a85f, 0xbebfe988, 0x64e4c3fe,
+	0x9dbc8057, 0xf0f7c086, 0x60787bf8, 0x6003604d,
+	0xd1fd8346, 0xf6381fb0, 0x7745ae04, 0xd736fccc,
+	0x83426b33, 0xf01eab71, 0xb0804187, 0x3c005e5f,
+	0x77a057be, 0xbde8ae24, 0x55464299, 0xbf582e61,
+	0x4e58f48f, 0xf2ddfda2, 0xf474ef38, 0x8789bdc2,
+	0x5366f9c3, 0xc8b38e74, 0xb475f255, 0x46fcd9b9,
+	0x7aeb2661, 0x8b1ddf84, 0x846a0e79, 0x915f95e2,
+	0x466e598e, 0x20b45770, 0x8cd55591, 0xc902de4c,
+	0xb90bace1, 0xbb8205d0, 0x11a86248, 0x7574a99e,
+	0xb77f19b6, 0xe0a9dc09, 0x662d09a1, 0xc4324633,
+	0xe85a1f02, 0x09f0be8c, 0x4a99a025, 0x1d6efe10,
+	0x1ab93d1d, 0x0ba5a4df, 0xa186f20f, 0x2868f169,
+	0xdcb7da83, 0x573906fe, 0xa1e2ce9b, 0x4fcd7f52,
+	0x50115e01, 0xa70683fa, 0xa002b5c4, 0x0de6d027,
+	0x9af88c27, 0x773f8641, 0xc3604c06, 0x61a806b5,
+	0xf0177a28, 0xc0f586e0, 0x006058aa, 0x30dc7d62,
+	0x11e69ed7, 0x2338ea63, 0x53c2dd94, 0xc2c21634,
+	0xbbcbee56, 0x90bcb6de, 0xebfc7da1, 0xce591d76,
+	0x6f05e409, 0x4b7c0188, 0x39720a3d, 0x7c927c24,
+	0x86e3725f, 0x724d9db9, 0x1ac15bb4, 0xd39eb8fc,
+	0xed545578, 0x08fca5b5, 0xd83d7cd3, 0x4dad0fc4,
+	0x1e50ef5e, 0xb161e6f8, 0xa28514d9, 0x6c51133c,
+	0x6fd5c7e7, 0x56e14ec4, 0x362abfce, 0xddc6c837,
+	0xd79a3234, 0x92638212, 0x670efa8e, 0x406000e0,
+	0x3a39ce37, 0xd3faf5cf, 0xabc27737, 0x5ac52d1b,
+	0x5cb0679e, 0x4fa33742, 0xd3822740, 0x99bc9bbe,
+	0xd5118e9d, 0xbf0f7315, 0xd62d1c7e, 0xc700c47b,
+	0xb78c1b6b, 0x21a19045, 0xb26eb1be, 0x6a366eb4,
+	0x5748ab2f, 0xbc946e79, 0xc6a376d2, 0x6549c2c8,
+	0x530ff8ee, 0x468dde7d, 0xd5730a1d, 0x4cd04dc6,
+	0x2939bbdb, 0xa9ba4650, 0xac9526e8, 0xbe5ee304,
+	0xa1fad5f0, 0x6a2d519a, 0x63ef8ce2, 0x9a86ee22,
+	0xc089c2b8, 0x43242ef6, 0xa51e03aa, 0x9cf2d0a4,
+	0x83c061ba, 0x9be96a4d, 0x8fe51550, 0xba645bd6,
+	0x2826a2f9, 0xa73a3ae1, 0x4ba99586, 0xef5562e9,
+	0xc72fefd3, 0xf752f7da, 0x3f046f69, 0x77fa0a59,
+	0x80e4a915, 0x87b08601, 0x9b09e6ad, 0x3b3ee593,
+	0xe990fd5a, 0x9e34d797, 0x2cf0b7d9, 0x022b8b51,
+	0x96d5ac3a, 0x017da67d, 0xd1cf3ed6, 0x7c7d2d28,
+	0x1f9f25cf, 0xadf2b89b, 0x5ad6b472, 0x5a88f54c,
+	0xe029ac71, 0xe019a5e6, 0x47b0acfd, 0xed93fa9b,
+	0xe8d3c48d, 0x283b57cc, 0xf8d56629, 0x79132e28,
+	0x785f0191, 0xed756055, 0xf7960e44, 0xe3d35e8c,
+	0x15056dd4, 0x88f46dba, 0x03a16125, 0x0564f0bd,
+	0xc3eb9e15, 0x3c9057a2, 0x97271aec, 0xa93a072a,
+	0x1b3f6d9b, 0x1e6321f5, 0xf59c66fb, 0x26dcf319,
+	0x7533d928, 0xb155fdf5, 0x03563482, 0x8aba3cbb,
+	0x28517711, 0xc20ad9f8, 0xabcc5167, 0xccad925f,
+	0x4de81751, 0x3830dc8e, 0x379d5862, 0x9320f991,
+	0xea7a90c2, 0xfb3e7bce, 0x5121ce64, 0x774fbe32,
+	0xa8b6e37e, 0xc3293d46, 0x48de5369, 0x6413e680,
+	0xa2ae0810, 0xdd6db224, 0x69852dfd, 0x09072166,
+	0xb39a460a, 0x6445c0dd, 0x586cdecf, 0x1c20c8ae,
+	0x5bbef7dd, 0x1b588d40, 0xccd2017f, 0x6bb4e3bb,
+	0xdda26a7e, 0x3a59ff45, 0x3e350a44, 0xbcb4cdd5,
+	0x72eacea8, 0xfa6484bb, 0x8d6612ae, 0xbf3c6f47,
+	0xd29be463, 0x542f5d9e, 0xaec2771b, 0xf64e6370,
+	0x740e0d8d, 0xe75b1357, 0xf8721671, 0xaf537d5d,
+	0x4040cb08, 0x4eb4e2cc, 0x34d2466a, 0x0115af84,
+	0xe1b00428, 0x95983a1d, 0x06b89fb4, 0xce6ea048,
+	0x6f3f3b82, 0x3520ab82, 0x011a1d4b, 0x277227f8,
+	0x611560b1, 0xe7933fdc, 0xbb3a792b, 0x344525bd,
+	0xa08839e1, 0x51ce794b, 0x2f32c9b7, 0xa01fbac9,
+	0xe01cc87e, 0xbcc7d1f6, 0xcf0111c3, 0xa1e8aac7,
+	0x1a908749, 0xd44fbd9a, 0xd0dadecb, 0xd50ada38,
+	0x0339c32a, 0xc6913667, 0x8df9317c, 0xe0b12b4f,
+	0xf79e59b7, 0x43f5bb3a, 0xf2d519ff, 0x27d9459c,
+	0xbf97222c, 0x15e6fc2a, 0x0f91fc71, 0x9b941525,
+	0xfae59361, 0xceb69ceb, 0xc2a86459, 0x12baa8d1,
+	0xb6c1075e, 0xe3056a0c, 0x10d25065, 0xcb03a442,
+	0xe0ec6e0e, 0x1698db3b, 0x4c98a0be, 0x3278e964,
+	0x9f1f9532, 0xe0d392df, 0xd3a0342b, 0x8971f21e,
+	0x1b0a7441, 0x4ba3348c, 0xc5be7120, 0xc37632d8,
+	0xdf359f8d, 0x9b992f2e, 0xe60b6f47, 0x0fe3f11d,
+	0xe54cda54, 0x1edad891, 0xce6279cf, 0xcd3e7e6f,
+	0x1618b166, 0xfd2c1d05, 0x848fd2c5, 0xf6fb2299,
+	0xf523f357, 0xa6327623, 0x93a83531, 0x56cccd02,
+	0xacf08162, 0x5a75ebb5, 0x6e163697, 0x88d273cc,
+	0xde966292, 0x81b949d0, 0x4c50901b, 0x71c65614,
+	0xe6c6c7bd, 0x327a140a, 0x45e1d006, 0xc3f27b9a,
+	0xc9aa53fd, 0x62a80f00, 0xbb25bfe2, 0x35bdd2f6,
+	0x71126905, 0xb2040222, 0xb6cbcf7c, 0xcd769c2b,
+	0x53113ec0, 0x1640e3d3, 0x38abbd60, 0x2547adf0,
+	0xba38209c, 0xf746ce76, 0x77afa1c5, 0x20756060,
+	0x85cbfe4e, 0x8ae88dd8, 0x7aaaf9b0, 0x4cf9aa7e,
+	0x1948c25c, 0x02fb8a8c, 0x01c36ae4, 0xd6ebe1f9,
+	0x90d4f869, 0xa65cdea0, 0x3f09252d, 0xc208e69f,
+	0xb74e6132, 0xce77e25b, 0x578fdfe3, 0x3ac372e6,
+};
+
+/*
+ * Round loop unrolling macros, S is a pointer to a S-Box array
+ * organized in 4 unsigned longs at a row.
+ */
+#define GET32_3(x) (((x) & 0xff))
+#define GET32_2(x) (((x) >> (8)) & (0xff))
+#define GET32_1(x) (((x) >> (16)) & (0xff))
+#define GET32_0(x) (((x) >> (24)) & (0xff))
+
+#define bf_F(x) (((S[GET32_0(x)] + S[256 + GET32_1(x)]) ^ \
+    S[512 + GET32_2(x)]) + S[768 + GET32_3(x)])
+
+#define EROUND(a, b, n)  do { b ^= P[n]; a ^= bf_F(b); } while (0)
+#define DROUND(a, b, n)  do { a ^= bf_F(b); b ^= P[n]; } while (0)
+
+
+/*
+ * encrypt isdn data frame
+ * every block with 9 samples is encrypted
+ */
+void
+dsp_bf_encrypt(struct dsp *dsp, u8 *data, int len)
+{
+	int i = 0, j = dsp->bf_crypt_pos;
+	u8 *bf_data_in = dsp->bf_data_in;
+	u8 *bf_crypt_out = dsp->bf_crypt_out;
+	u32 *P = dsp->bf_p;
+	u32 *S = dsp->bf_s;
+	u32 yl, yr;
+	u32 cs;
+	u8 nibble;
+
+	while (i < len) {
+		/* collect a block of 9 samples */
+		if (j < 9) {
+			bf_data_in[j] = *data;
+			*data++ = bf_crypt_out[j++];
+			i++;
+			continue;
+		}
+		j = 0;
+		/* transcode 9 samples xlaw to 8 bytes */
+		yl = dsp_audio_law2seven[bf_data_in[0]];
+		yl = (yl<<7) | dsp_audio_law2seven[bf_data_in[1]];
+		yl = (yl<<7) | dsp_audio_law2seven[bf_data_in[2]];
+		yl = (yl<<7) | dsp_audio_law2seven[bf_data_in[3]];
+		nibble = dsp_audio_law2seven[bf_data_in[4]];
+		yr = nibble;
+		yl = (yl<<4) | (nibble>>3);
+		yr = (yr<<7) | dsp_audio_law2seven[bf_data_in[5]];
+		yr = (yr<<7) | dsp_audio_law2seven[bf_data_in[6]];
+		yr = (yr<<7) | dsp_audio_law2seven[bf_data_in[7]];
+		yr = (yr<<7) | dsp_audio_law2seven[bf_data_in[8]];
+		yr = (yr<<1) | (bf_data_in[0] & 1);
+
+		/* fill unused bit with random noise of audio input */
+		/* encrypt */
+
+		EROUND(yr, yl, 0);
+		EROUND(yl, yr, 1);
+		EROUND(yr, yl, 2);
+		EROUND(yl, yr, 3);
+		EROUND(yr, yl, 4);
+		EROUND(yl, yr, 5);
+		EROUND(yr, yl, 6);
+		EROUND(yl, yr, 7);
+		EROUND(yr, yl, 8);
+		EROUND(yl, yr, 9);
+		EROUND(yr, yl, 10);
+		EROUND(yl, yr, 11);
+		EROUND(yr, yl, 12);
+		EROUND(yl, yr, 13);
+		EROUND(yr, yl, 14);
+		EROUND(yl, yr, 15);
+		yl ^= P[16];
+		yr ^= P[17];
+
+		/* calculate 3-bit checksumme */
+		cs = yl ^ (yl>>3) ^ (yl>>6) ^ (yl>>9) ^ (yl>>12) ^ (yl>>15)
+			^ (yl>>18) ^ (yl>>21) ^ (yl>>24) ^ (yl>>27) ^ (yl>>30)
+			^ (yr<<2) ^ (yr>>1) ^ (yr>>4) ^ (yr>>7) ^ (yr>>10)
+			^ (yr>>13) ^ (yr>>16) ^ (yr>>19) ^ (yr>>22) ^ (yr>>25)
+			^ (yr>>28) ^ (yr>>31);
+
+		/*
+		 * transcode 8 crypted bytes to 9 data bytes with sync
+		 * and checksum information
+		 */
+		bf_crypt_out[0] = (yl>>25) | 0x80;
+		bf_crypt_out[1] = (yl>>18) & 0x7f;
+		bf_crypt_out[2] = (yl>>11) & 0x7f;
+		bf_crypt_out[3] = (yl>>4) & 0x7f;
+		bf_crypt_out[4] = ((yl<<3) & 0x78) | ((yr>>29) & 0x07);
+		bf_crypt_out[5] = ((yr>>22) & 0x7f) | ((cs<<5) & 0x80);
+		bf_crypt_out[6] = ((yr>>15) & 0x7f) | ((cs<<6) & 0x80);
+		bf_crypt_out[7] = ((yr>>8) & 0x7f) | (cs<<7);
+		bf_crypt_out[8] = yr;
+	}
+
+	/* write current count */
+	dsp->bf_crypt_pos = j;
+
+}
+
+
+/*
+ * decrypt isdn data frame
+ * every block with 9 bytes is decrypted
+ */
+void
+dsp_bf_decrypt(struct dsp *dsp, u8 *data, int len)
+{
+	int i = 0;
+	u8 j = dsp->bf_decrypt_in_pos;
+	u8 k = dsp->bf_decrypt_out_pos;
+	u8 *bf_crypt_inring = dsp->bf_crypt_inring;
+	u8 *bf_data_out = dsp->bf_data_out;
+	u16 sync = dsp->bf_sync;
+	u32 *P = dsp->bf_p;
+	u32 *S = dsp->bf_s;
+	u32 yl, yr;
+	u8 nibble;
+	u8 cs, cs0, cs1, cs2;
+
+	while (i < len) {
+		/*
+		 * shift upper bit and rotate data to buffer ring
+		 * send current decrypted data
+		 */
+		sync = (sync<<1) | ((*data)>>7);
+		bf_crypt_inring[j++ & 15] = *data;
+		*data++ = bf_data_out[k++];
+		i++;
+		if (k == 9)
+			k = 0; /* repeat if no sync has been found */
+		/* check if not in sync */
+		if ((sync&0x1f0) != 0x100)
+			continue;
+		j -= 9;
+		/* transcode receive data to 64 bit block of encrypted data */
+		yl = bf_crypt_inring[j++ & 15];
+		yl = (yl<<7) | bf_crypt_inring[j++ & 15]; /* bit7 = 0 */
+		yl = (yl<<7) | bf_crypt_inring[j++ & 15]; /* bit7 = 0 */
+		yl = (yl<<7) | bf_crypt_inring[j++ & 15]; /* bit7 = 0 */
+		nibble = bf_crypt_inring[j++ & 15]; /* bit7 = 0 */
+		yr = nibble;
+		yl = (yl<<4) | (nibble>>3);
+		cs2 = bf_crypt_inring[j++ & 15];
+		yr = (yr<<7) | (cs2 & 0x7f);
+		cs1 = bf_crypt_inring[j++ & 15];
+		yr = (yr<<7) | (cs1 & 0x7f);
+		cs0 = bf_crypt_inring[j++ & 15];
+		yr = (yr<<7) | (cs0 & 0x7f);
+		yr = (yr<<8) | bf_crypt_inring[j++ & 15];
+
+		/* calculate 3-bit checksumme */
+		cs = yl ^ (yl>>3) ^ (yl>>6) ^ (yl>>9) ^ (yl>>12) ^ (yl>>15)
+			^ (yl>>18) ^ (yl>>21) ^ (yl>>24) ^ (yl>>27) ^ (yl>>30)
+			^ (yr<<2) ^ (yr>>1) ^ (yr>>4) ^ (yr>>7) ^ (yr>>10)
+			^ (yr>>13) ^ (yr>>16) ^ (yr>>19) ^ (yr>>22) ^ (yr>>25)
+			^ (yr>>28) ^ (yr>>31);
+
+		/* check if frame is valid */
+		if ((cs&0x7) != (((cs2>>5)&4) | ((cs1>>6)&2) | (cs0 >> 7))) {
+			if (dsp_debug & DEBUG_DSP_BLOWFISH)
+				printk(KERN_DEBUG
+				    "DSP BLOWFISH: received corrupt frame, "
+				    "checksumme is not correct\n");
+			continue;
+		}
+
+		/* decrypt */
+		yr ^= P[17];
+		yl ^= P[16];
+		DROUND(yl, yr, 15);
+		DROUND(yr, yl, 14);
+		DROUND(yl, yr, 13);
+		DROUND(yr, yl, 12);
+		DROUND(yl, yr, 11);
+		DROUND(yr, yl, 10);
+		DROUND(yl, yr, 9);
+		DROUND(yr, yl, 8);
+		DROUND(yl, yr, 7);
+		DROUND(yr, yl, 6);
+		DROUND(yl, yr, 5);
+		DROUND(yr, yl, 4);
+		DROUND(yl, yr, 3);
+		DROUND(yr, yl, 2);
+		DROUND(yl, yr, 1);
+		DROUND(yr, yl, 0);
+
+		/* transcode 8 crypted bytes to 9 sample bytes */
+		bf_data_out[0] = dsp_audio_seven2law[(yl>>25) & 0x7f];
+		bf_data_out[1] = dsp_audio_seven2law[(yl>>18) & 0x7f];
+		bf_data_out[2] = dsp_audio_seven2law[(yl>>11) & 0x7f];
+		bf_data_out[3] = dsp_audio_seven2law[(yl>>4) & 0x7f];
+		bf_data_out[4] = dsp_audio_seven2law[((yl<<3) & 0x78) |
+		    ((yr>>29) & 0x07)];
+
+		bf_data_out[5] = dsp_audio_seven2law[(yr>>22) & 0x7f];
+		bf_data_out[6] = dsp_audio_seven2law[(yr>>15) & 0x7f];
+		bf_data_out[7] = dsp_audio_seven2law[(yr>>8) & 0x7f];
+		bf_data_out[8] = dsp_audio_seven2law[(yr>>1) & 0x7f];
+		k = 0; /* start with new decoded frame */
+	}
+
+	/* write current count and sync */
+	dsp->bf_decrypt_in_pos = j;
+	dsp->bf_decrypt_out_pos = k;
+	dsp->bf_sync = sync;
+}
+
+
+/* used to encrypt S and P boxes */
+static inline void
+encrypt_block(const u32 *P, const u32 *S, u32 *dst, u32 *src)
+{
+	u32 yl = src[0];
+	u32 yr = src[1];
+
+	EROUND(yr, yl, 0);
+	EROUND(yl, yr, 1);
+	EROUND(yr, yl, 2);
+	EROUND(yl, yr, 3);
+	EROUND(yr, yl, 4);
+	EROUND(yl, yr, 5);
+	EROUND(yr, yl, 6);
+	EROUND(yl, yr, 7);
+	EROUND(yr, yl, 8);
+	EROUND(yl, yr, 9);
+	EROUND(yr, yl, 10);
+	EROUND(yl, yr, 11);
+	EROUND(yr, yl, 12);
+	EROUND(yl, yr, 13);
+	EROUND(yr, yl, 14);
+	EROUND(yl, yr, 15);
+
+	yl ^= P[16];
+	yr ^= P[17];
+
+	dst[0] = yr;
+	dst[1] = yl;
+}
+
+/*
+ * initialize the dsp for encryption and decryption using the same key
+ * Calculates the blowfish S and P boxes for encryption and decryption.
+ * The margin of keylen must be 4-56 bytes.
+ * returns 0 if ok.
+ */
+int
+dsp_bf_init(struct dsp *dsp, const u8 *key, uint keylen)
+{
+	short i, j, count;
+	u32 data[2], temp;
+	u32 *P = (u32 *)dsp->bf_p;
+	u32 *S = (u32 *)dsp->bf_s;
+
+	if (keylen < 4 || keylen > 56)
+		return 1;
+
+	/* Set dsp states */
+	i = 0;
+	while (i < 9) {
+		dsp->bf_crypt_out[i] = 0xff;
+		dsp->bf_data_out[i] = dsp_silence;
+		i++;
+	}
+	dsp->bf_crypt_pos = 0;
+	dsp->bf_decrypt_in_pos = 0;
+	dsp->bf_decrypt_out_pos = 0;
+	dsp->bf_sync = 0x1ff;
+	dsp->bf_enable = 1;
+
+	/* Copy the initialization s-boxes */
+	for (i = 0, count = 0; i < 256; i++)
+		for (j = 0; j < 4; j++, count++)
+			S[count] = bf_sbox[count];
+
+	/* Set the p-boxes */
+	for (i = 0; i < 16 + 2; i++)
+		P[i] = bf_pbox[i];
+
+	/* Actual subkey generation */
+	for (j = 0, i = 0; i < 16 + 2; i++) {
+		temp = (((u32)key[j] << 24) |
+		    ((u32)key[(j + 1) % keylen] << 16) |
+		    ((u32)key[(j + 2) % keylen] << 8) |
+		    ((u32)key[(j + 3) % keylen]));
+
+		P[i] = P[i] ^ temp;
+		j = (j + 4) % keylen;
+	}
+
+	data[0] = 0x00000000;
+	data[1] = 0x00000000;
+
+	for (i = 0; i < 16 + 2; i += 2) {
+		encrypt_block(P, S, data, data);
+
+		P[i] = data[0];
+		P[i + 1] = data[1];
+	}
+
+	for (i = 0; i < 4; i++) {
+		for (j = 0, count = i * 256; j < 256; j += 2, count += 2) {
+			encrypt_block(P, S, data, data);
+
+			S[count] = data[0];
+			S[count + 1] = data[1];
+		}
+	}
+
+	return 0;
+}
+
+
+/*
+ * turn encryption off
+ */
+void
+dsp_bf_cleanup(struct dsp *dsp)
+{
+	dsp->bf_enable = 0;
+}
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
new file mode 100644
index 00000000000..e92b1ba4b45
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -0,0 +1,1886 @@
+/*
+ * Audio crossconnecting/conferrencing (hardware level).
+ *
+ * Copyright 2002 by Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+/*
+ * The process of adding and removing parties to/from a conference:
+ *
+ * There is a chain of struct dsp_conf which has one or more members in a chain
+ * of struct dsp_conf_member.
+ *
+ * After a party is added, the conference is checked for hardware capability.
+ * Also if a party is removed, the conference is checked again.
+ *
+ * There are 3 different solutions: -1 = software, 0 = hardware-crossconnect
+ * 1-n = hardware-conference. The n will give the conference number.
+ *
+ * Depending on the change after removal or insertion of a party, hardware
+ * commands are given.
+ *
+ * The current solution is stored within the struct dsp_conf entry.
+ */
+
+/*
+ * HOW THE CMX WORKS:
+ *
+ * There are 3 types of interaction: One member is alone, in this case only
+ * data flow from upper to lower layer is done.
+ * Two members will also exchange their data so they are crossconnected.
+ * Three or more members will be added in a conference and will hear each
+ * other but will not receive their own speech (echo) if not enabled.
+ *
+ * Features of CMX are:
+ *  - Crossconnecting or even conference, if more than two members are together.
+ *  - Force mixing of transmit data with other crossconnect/conference members.
+ *  - Echo generation to benchmark the delay of audio processing.
+ *  - Use hardware to minimize cpu load, disable FIFO load and minimize delay.
+ *  - Dejittering and clock generation.
+ *
+ * There are 2 buffers:
+ *
+ *
+ * RX-Buffer
+ *                 R             W
+ *                 |             |
+ * ----------------+-------------+-------------------
+ *
+ * The rx-buffer is a ring buffer used to store the received data for each
+ * individual member. This is only the case if data needs to be dejittered
+ * or in case of a conference where different clocks require reclocking.
+ * The transmit-clock (R) will read the buffer.
+ * If the clock overruns the write-pointer, we will have a buffer underrun.
+ * If the write pointer always has a certain distance from the transmit-
+ * clock, we will have a delay. The delay will dynamically be increased and
+ * reduced.
+ *
+ *
+ * TX-Buffer
+ *                  R        W
+ *                  |        |
+ * -----------------+--------+-----------------------
+ *
+ * The tx-buffer is a ring buffer to queue the transmit data from user space
+ * until it will be mixed or sent. There are two pointers, R and W. If the write
+ * pointer W would reach or overrun R, the buffer would overrun. In this case
+ * (some) data is dropped so that it will not overrun.
+ * Additionally a dynamic dejittering can be enabled. this allows data from
+ * user space that have jitter and different clock source.
+ *
+ *
+ * Clock:
+ *
+ * A Clock is not required, if the data source has exactly one clock. In this
+ * case the data source is forwarded to the destination.
+ *
+ * A Clock is required, because the data source
+ *  - has multiple clocks.
+ *  - has no usable clock due to jitter or packet loss (VoIP).
+ * In this case the system's clock is used. The clock resolution depends on
+ * the jiffie resolution.
+ *
+ * If a member joins a conference:
+ *
+ * - If a member joins, its rx_buff is set to silence and change read pointer
+ *   to transmit clock.
+ *
+ * The procedure of received data from card is explained in cmx_receive.
+ * The procedure of received data from user space is explained in cmx_transmit.
+ * The procedure of transmit data to card is cmx_send.
+ *
+ *
+ * Interaction with other features:
+ *
+ * DTMF:
+ * DTMF decoding is done before the data is crossconnected.
+ *
+ * Volume change:
+ * Changing rx-volume is done before the data is crossconnected. The tx-volume
+ * must be changed whenever data is transmitted to the card by the cmx.
+ *
+ * Tones:
+ * If a tone is enabled, it will be processed whenever data is transmitted to
+ * the card. It will replace the tx-data from the user space.
+ * If tones are generated by hardware, this conference member is removed for
+ * this time.
+ *
+ * Disable rx-data:
+ * If cmx is realized in hardware, rx data will be disabled if requested by
+ * the upper layer. If dtmf decoding is done by software and enabled, rx data
+ * will not be diabled but blocked to the upper layer.
+ *
+ * HFC conference engine:
+ * If it is possible to realize all features using hardware, hardware will be
+ * used if not forbidden by control command. Disabling rx-data provides
+ * absolutely traffic free audio processing. (except for the quick 1-frame
+ * upload of a tone loop, only once for a new tone)
+ *
+ */
+
+/* delay.h is required for hw_lock.h */
+
+#include <linux/delay.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+/*
+ * debugging of multi party conference,
+ * by using conference even with two members
+ */
+
+/* #define CMX_CONF_DEBUG */
+
+/*#define CMX_DEBUG * massive read/write pointer output */
+/*#define CMX_TX_DEBUG * massive read/write on tx-buffer with content */
+
+static inline int
+count_list_member(struct list_head *head)
+{
+	int			cnt = 0;
+	struct list_head	*m;
+
+	list_for_each(m, head)
+		cnt++;
+	return cnt;
+}
+
+/*
+ * debug cmx memory structure
+ */
+void
+dsp_cmx_debug(struct dsp *dsp)
+{
+	struct dsp_conf	*conf;
+	struct dsp_conf_member	*member;
+	struct dsp		*odsp;
+
+	printk(KERN_DEBUG "-----Current DSP\n");
+	list_for_each_entry(odsp, &dsp_ilist, list) {
+		printk(KERN_DEBUG "* %s echo=%d txmix=%d",
+		    odsp->name, odsp->echo, odsp->tx_mix);
+		if (odsp->conf)
+			printk(" (Conf %d)", odsp->conf->id);
+		if (dsp == odsp)
+			printk(" *this*");
+		printk("\n");
+	}
+	printk(KERN_DEBUG "-----Current Conf:\n");
+	list_for_each_entry(conf, &conf_ilist, list) {
+		printk(KERN_DEBUG "* Conf %d (%p)\n", conf->id, conf);
+		list_for_each_entry(member, &conf->mlist, list) {
+			printk(KERN_DEBUG
+			    "  - member = %s (slot_tx %d, bank_tx %d, "
+			    "slot_rx %d, bank_rx %d hfc_conf %d)%s\n",
+			    member->dsp->name, member->dsp->pcm_slot_tx,
+			    member->dsp->pcm_bank_tx, member->dsp->pcm_slot_rx,
+			    member->dsp->pcm_bank_rx, member->dsp->hfc_conf,
+			    (member->dsp == dsp) ? " *this*" : "");
+		}
+	}
+	printk(KERN_DEBUG "-----end\n");
+}
+
+/*
+ * search conference
+ */
+static struct dsp_conf *
+dsp_cmx_search_conf(u32 id)
+{
+	struct dsp_conf *conf;
+
+	if (!id) {
+		printk(KERN_WARNING "%s: conference ID is 0.\n", __func__);
+		return NULL;
+	}
+
+	/* search conference */
+	list_for_each_entry(conf, &conf_ilist, list)
+		if (conf->id == id)
+			return conf;
+
+	return NULL;
+}
+
+
+/*
+ * add member to conference
+ */
+static int
+dsp_cmx_add_conf_member(struct dsp *dsp, struct dsp_conf *conf)
+{
+	struct dsp_conf_member *member;
+
+	if (!conf || !dsp) {
+		printk(KERN_WARNING "%s: conf or dsp is 0.\n", __func__);
+		return -EINVAL;
+	}
+	if (dsp->member) {
+		printk(KERN_WARNING "%s: dsp is already member in a conf.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (dsp->conf) {
+		printk(KERN_WARNING "%s: dsp is already in a conf.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	member = kzalloc(sizeof(struct dsp_conf_member), GFP_ATOMIC);
+	if (!member) {
+		printk(KERN_ERR "kmalloc struct dsp_conf_member failed\n");
+		return -ENOMEM;
+	}
+	member->dsp = dsp;
+	/* clear rx buffer */
+	memset(dsp->rx_buff, dsp_silence, sizeof(dsp->rx_buff));
+	dsp->rx_init = 1; /* rx_W and rx_R will be adjusted on first frame */
+	dsp->rx_W = 0;
+	dsp->rx_R = 0;
+
+	list_add_tail(&member->list, &conf->mlist);
+
+	dsp->conf = conf;
+	dsp->member = member;
+
+	return 0;
+}
+
+
+/*
+ * del member from conference
+ */
+int
+dsp_cmx_del_conf_member(struct dsp *dsp)
+{
+	struct dsp_conf_member *member;
+
+	if (!dsp) {
+		printk(KERN_WARNING "%s: dsp is 0.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (!dsp->conf) {
+		printk(KERN_WARNING "%s: dsp is not in a conf.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (list_empty(&dsp->conf->mlist)) {
+		printk(KERN_WARNING "%s: dsp has linked an empty conf.\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	/* find us in conf */
+	list_for_each_entry(member, &dsp->conf->mlist, list) {
+		if (member->dsp == dsp) {
+			list_del(&member->list);
+			dsp->conf = NULL;
+			dsp->member = NULL;
+			kfree(member);
+			return 0;
+		}
+	}
+	printk(KERN_WARNING
+	    "%s: dsp is not present in its own conf_meber list.\n",
+	    __func__);
+
+	return -EINVAL;
+}
+
+
+/*
+ * new conference
+ */
+static struct dsp_conf
+*dsp_cmx_new_conf(u32 id)
+{
+	struct dsp_conf *conf;
+
+	if (!id) {
+		printk(KERN_WARNING "%s: id is 0.\n",
+		    __func__);
+		return NULL;
+	}
+
+	conf = kzalloc(sizeof(struct dsp_conf), GFP_ATOMIC);
+	if (!conf) {
+		printk(KERN_ERR "kmalloc struct dsp_conf failed\n");
+		return NULL;
+	}
+	INIT_LIST_HEAD(&conf->mlist);
+	conf->id = id;
+
+	list_add_tail(&conf->list, &conf_ilist);
+
+	return conf;
+}
+
+
+/*
+ * del conference
+ */
+int
+dsp_cmx_del_conf(struct dsp_conf *conf)
+{
+	if (!conf) {
+		printk(KERN_WARNING "%s: conf is null.\n",
+		    __func__);
+		return -EINVAL;
+	}
+
+	if (!list_empty(&conf->mlist)) {
+		printk(KERN_WARNING "%s: conf not empty.\n",
+		    __func__);
+		return -EINVAL;
+	}
+	list_del(&conf->list);
+	kfree(conf);
+
+	return 0;
+}
+
+
+/*
+ * send HW message to hfc card
+ */
+static void
+dsp_cmx_hw_message(struct dsp *dsp, u32 message, u32 param1, u32 param2,
+    u32 param3, u32 param4)
+{
+	struct mISDN_ctrl_req cq;
+
+	memset(&cq, 0, sizeof(cq));
+	cq.op = message;
+	cq.p1 = param1 | (param2 << 8);
+	cq.p2 = param3 | (param4 << 8);
+	if (dsp->ch.peer)
+		dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq);
+}
+
+
+/*
+ * do hardware update and set the software/hardware flag
+ *
+ * either a conference or a dsp instance can be given
+ * if only dsp instance is given, the instance is not associated with a conf
+ * and therefore removed. if a conference is given, the dsp is expected to
+ * be member of that conference.
+ */
+void
+dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp)
+{
+	struct dsp_conf_member	*member, *nextm;
+	struct dsp		*finddsp;
+	int		memb = 0, i, ii, i1, i2;
+	int		freeunits[8];
+	u_char		freeslots[256];
+	int		same_hfc = -1, same_pcm = -1, current_conf = -1,
+	    all_conf = 1;
+
+	/* dsp gets updated (no conf) */
+	if (!conf) {
+		if (!dsp)
+			return;
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG "%s checking dsp %s\n",
+			    __func__, dsp->name);
+one_member:
+		/* remove HFC conference if enabled */
+		if (dsp->hfc_conf >= 0) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s removing %s from HFC conf %d "
+				    "because dsp is split\n", __func__,
+				    dsp->name, dsp->hfc_conf);
+			dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_CONF_SPLIT,
+			    0, 0, 0, 0);
+			dsp->hfc_conf = -1;
+		}
+		/* process hw echo */
+		if (dsp->features.pcm_banks < 1)
+			return;
+		if (!dsp->echo) {
+			/* NO ECHO: remove PCM slot if assigned */
+			if (dsp->pcm_slot_tx >= 0 || dsp->pcm_slot_rx >= 0) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG "%s removing %s from"
+					    " PCM slot %d (TX) %d (RX) because"
+					    " dsp is split (no echo)\n",
+					    __func__, dsp->name,
+					    dsp->pcm_slot_tx, dsp->pcm_slot_rx);
+				dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_DISC,
+				    0, 0, 0, 0);
+				dsp->pcm_slot_tx = -1;
+				dsp->pcm_bank_tx = -1;
+				dsp->pcm_slot_rx = -1;
+				dsp->pcm_bank_rx = -1;
+			}
+			return;
+		}
+		/* ECHO: already echo */
+		if (dsp->pcm_slot_tx >= 0 && dsp->pcm_slot_rx < 0 &&
+		    dsp->pcm_bank_tx == 2 && dsp->pcm_bank_rx == 2)
+			return;
+		/* ECHO: if slot already assigned */
+		if (dsp->pcm_slot_tx >= 0) {
+			dsp->pcm_slot_rx = dsp->pcm_slot_tx;
+			dsp->pcm_bank_tx = 2; /* 2 means loop */
+			dsp->pcm_bank_rx = 2;
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s refresh %s for echo using slot %d\n",
+				    __func__, dsp->name,
+				    dsp->pcm_slot_tx);
+			dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
+			return;
+		}
+		/* ECHO: find slot */
+		dsp->pcm_slot_tx = -1;
+		dsp->pcm_slot_rx = -1;
+		memset(freeslots, 1, sizeof(freeslots));
+		list_for_each_entry(finddsp, &dsp_ilist, list) {
+			if (finddsp->features.pcm_id == dsp->features.pcm_id) {
+				if (finddsp->pcm_slot_rx >= 0 &&
+				    finddsp->pcm_slot_rx < sizeof(freeslots))
+					freeslots[finddsp->pcm_slot_tx] = 0;
+				if (finddsp->pcm_slot_tx >= 0 &&
+				    finddsp->pcm_slot_tx < sizeof(freeslots))
+					freeslots[finddsp->pcm_slot_rx] = 0;
+			}
+		}
+		i = 0;
+		ii = dsp->features.pcm_slots;
+		while (i < ii) {
+			if (freeslots[i])
+				break;
+			i++;
+		}
+		if (i == ii) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s no slot available for echo\n",
+				    __func__);
+			/* no more slots available */
+			return;
+		}
+		/* assign free slot */
+		dsp->pcm_slot_tx = i;
+		dsp->pcm_slot_rx = i;
+		dsp->pcm_bank_tx = 2; /* loop */
+		dsp->pcm_bank_rx = 2;
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "%s assign echo for %s using slot %d\n",
+			    __func__, dsp->name, dsp->pcm_slot_tx);
+		dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
+		    dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
+		return;
+	}
+
+	/* conf gets updated (all members) */
+	if (dsp_debug & DEBUG_DSP_CMX)
+		printk(KERN_DEBUG "%s checking conference %d\n",
+		    __func__, conf->id);
+
+	if (list_empty(&conf->mlist)) {
+		printk(KERN_ERR "%s: conference whithout members\n",
+		    __func__);
+		return;
+	}
+	member = list_entry(conf->mlist.next, struct dsp_conf_member, list);
+	same_hfc = member->dsp->features.hfc_id;
+	same_pcm = member->dsp->features.pcm_id;
+	/* check all members in our conference */
+	list_for_each_entry(member, &conf->mlist, list) {
+		/* check if member uses mixing */
+		if (member->dsp->tx_mix) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "tx_mix is turned on\n", __func__,
+				    member->dsp->name);
+conf_software:
+			list_for_each_entry(member, &conf->mlist, list) {
+				dsp = member->dsp;
+				/* remove HFC conference if enabled */
+				if (dsp->hfc_conf >= 0) {
+					if (dsp_debug & DEBUG_DSP_CMX)
+						printk(KERN_DEBUG
+						    "%s removing %s from HFC "
+						    "conf %d because not "
+						    "possible with hardware\n",
+						    __func__,
+						    dsp->name,
+						    dsp->hfc_conf);
+					dsp_cmx_hw_message(dsp,
+					    MISDN_CTRL_HFC_CONF_SPLIT,
+					    0, 0, 0, 0);
+					dsp->hfc_conf = -1;
+				}
+				/* remove PCM slot if assigned */
+				if (dsp->pcm_slot_tx >= 0 ||
+				    dsp->pcm_slot_rx >= 0) {
+					if (dsp_debug & DEBUG_DSP_CMX)
+						printk(KERN_DEBUG "%s removing "
+						    "%s from PCM slot %d (TX)"
+						    " slot %d (RX) because not"
+						    " possible with hardware\n",
+						    __func__,
+						    dsp->name,
+						    dsp->pcm_slot_tx,
+						    dsp->pcm_slot_rx);
+					dsp_cmx_hw_message(dsp,
+					    MISDN_CTRL_HFC_PCM_DISC,
+					    0, 0, 0, 0);
+					dsp->pcm_slot_tx = -1;
+					dsp->pcm_bank_tx = -1;
+					dsp->pcm_slot_rx = -1;
+					dsp->pcm_bank_rx = -1;
+				}
+			}
+			conf->hardware = 0;
+			conf->software = 1;
+			return;
+		}
+		/* check if member has echo turned on */
+		if (member->dsp->echo) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "echo is turned on\n", __func__,
+				    member->dsp->name);
+			goto conf_software;
+		}
+		/* check if member has tx_mix turned on */
+		if (member->dsp->tx_mix) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "tx_mix is turned on\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if member changes volume at an not suppoted level */
+		if (member->dsp->tx_volume) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "tx_volume is changed\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		if (member->dsp->rx_volume) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "rx_volume is changed\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if tx-data turned on */
+		if (member->dsp->tx_data) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "tx_data is turned on\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if pipeline exists */
+		if (member->dsp->pipeline.inuse) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "pipeline exists\n", __func__,
+				    member->dsp->name);
+			goto conf_software;
+		}
+		/* check if encryption is enabled */
+		if (member->dsp->bf_enable) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG "%s dsp %s cannot form a "
+				    "conf, because encryption is enabled\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if member is on a card with PCM support */
+		if (member->dsp->features.pcm_id < 0) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "dsp has no PCM bus\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* check if relations are on the same PCM bus */
+		if (member->dsp->features.pcm_id != same_pcm) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s dsp %s cannot form a conf, because "
+				    "dsp is on a different PCM bus than the "
+				    "first dsp\n",
+				    __func__, member->dsp->name);
+			goto conf_software;
+		}
+		/* determine if members are on the same hfc chip */
+		if (same_hfc != member->dsp->features.hfc_id)
+			same_hfc = -1;
+		/* if there are members already in a conference */
+		if (current_conf < 0 && member->dsp->hfc_conf >= 0)
+			current_conf = member->dsp->hfc_conf;
+		/* if any member is not in a conference */
+		if (member->dsp->hfc_conf < 0)
+			all_conf = 0;
+
+		memb++;
+	}
+
+	/* if no member, this is an error */
+	if (memb < 1)
+		return;
+
+	/* one member */
+	if (memb == 1) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "%s conf %d cannot form a HW conference, "
+			    "because dsp is alone\n", __func__, conf->id);
+		conf->hardware = 0;
+		conf->software = 0;
+		member = list_entry(conf->mlist.next, struct dsp_conf_member,
+			list);
+		dsp = member->dsp;
+		goto one_member;
+	}
+
+	/*
+	 * ok, now we are sure that all members are on the same pcm.
+	 * now we will see if we have only two members, so we can do
+	 * crossconnections, which don't have any limitations.
+	 */
+
+	/* if we have only two members */
+	if (memb == 2) {
+		member = list_entry(conf->mlist.next, struct dsp_conf_member,
+			list);
+		nextm = list_entry(member->list.next, struct dsp_conf_member,
+			list);
+		/* remove HFC conference if enabled */
+		if (member->dsp->hfc_conf >= 0) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s removing %s from HFC conf %d because "
+				    "two parties require only a PCM slot\n",
+				    __func__, member->dsp->name,
+				    member->dsp->hfc_conf);
+			dsp_cmx_hw_message(member->dsp,
+			    MISDN_CTRL_HFC_CONF_SPLIT, 0, 0, 0, 0);
+			member->dsp->hfc_conf = -1;
+		}
+		if (nextm->dsp->hfc_conf >= 0) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s removing %s from HFC conf %d because "
+				    "two parties require only a PCM slot\n",
+				    __func__, nextm->dsp->name,
+				    nextm->dsp->hfc_conf);
+			dsp_cmx_hw_message(nextm->dsp,
+			    MISDN_CTRL_HFC_CONF_SPLIT, 0, 0, 0, 0);
+			nextm->dsp->hfc_conf = -1;
+		}
+		/* if members have two banks (and not on the same chip) */
+		if (member->dsp->features.pcm_banks > 1 &&
+		    nextm->dsp->features.pcm_banks > 1 &&
+		    member->dsp->features.hfc_id !=
+		    nextm->dsp->features.hfc_id) {
+			/* if both members have same slots with crossed banks */
+			if (member->dsp->pcm_slot_tx >= 0 &&
+			    member->dsp->pcm_slot_rx >= 0 &&
+			    nextm->dsp->pcm_slot_tx >= 0 &&
+			    nextm->dsp->pcm_slot_rx >= 0 &&
+			    nextm->dsp->pcm_slot_tx ==
+			    member->dsp->pcm_slot_rx &&
+			    nextm->dsp->pcm_slot_rx ==
+			    member->dsp->pcm_slot_tx &&
+			    nextm->dsp->pcm_slot_tx ==
+			    member->dsp->pcm_slot_tx &&
+			    member->dsp->pcm_bank_tx !=
+			    member->dsp->pcm_bank_rx &&
+			    nextm->dsp->pcm_bank_tx !=
+			    nextm->dsp->pcm_bank_rx) {
+				/* all members have same slot */
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s dsp %s & %s stay joined on "
+					    "PCM slot %d bank %d (TX) bank %d "
+					    "(RX) (on different chips)\n",
+					    __func__,
+					    member->dsp->name,
+					    nextm->dsp->name,
+					    member->dsp->pcm_slot_tx,
+					    member->dsp->pcm_bank_tx,
+					    member->dsp->pcm_bank_rx);
+				conf->hardware = 0;
+				conf->software = 1;
+				return;
+			}
+			/* find a new slot */
+			memset(freeslots, 1, sizeof(freeslots));
+			list_for_each_entry(dsp, &dsp_ilist, list) {
+				if (dsp != member->dsp &&
+				    dsp != nextm->dsp &&
+				    member->dsp->features.pcm_id ==
+				    dsp->features.pcm_id) {
+					if (dsp->pcm_slot_rx >= 0 &&
+					    dsp->pcm_slot_rx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_tx] = 0;
+					if (dsp->pcm_slot_tx >= 0 &&
+					    dsp->pcm_slot_tx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_rx] = 0;
+				}
+			}
+			i = 0;
+			ii = member->dsp->features.pcm_slots;
+			while (i < ii) {
+				if (freeslots[i])
+					break;
+				i++;
+			}
+			if (i == ii) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s no slot available for "
+					    "%s & %s\n", __func__,
+					    member->dsp->name,
+					    nextm->dsp->name);
+				/* no more slots available */
+				goto conf_software;
+			}
+			/* assign free slot */
+			member->dsp->pcm_slot_tx = i;
+			member->dsp->pcm_slot_rx = i;
+			nextm->dsp->pcm_slot_tx = i;
+			nextm->dsp->pcm_slot_rx = i;
+			member->dsp->pcm_bank_rx = 0;
+			member->dsp->pcm_bank_tx = 1;
+			nextm->dsp->pcm_bank_rx = 1;
+			nextm->dsp->pcm_bank_tx = 0;
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s adding %s & %s to new PCM slot %d "
+				    "(TX and RX on different chips) because "
+				    "both members have not same slots\n",
+				    __func__,
+				    member->dsp->name,
+				    nextm->dsp->name,
+				    member->dsp->pcm_slot_tx);
+			dsp_cmx_hw_message(member->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    member->dsp->pcm_slot_tx, member->dsp->pcm_bank_tx,
+			    member->dsp->pcm_slot_rx, member->dsp->pcm_bank_rx);
+			dsp_cmx_hw_message(nextm->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
+			    nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
+			conf->hardware = 1;
+			conf->software = 0;
+			return;
+		/* if members have one bank (or on the same chip) */
+		} else {
+			/* if both members have different crossed slots */
+			if (member->dsp->pcm_slot_tx >= 0 &&
+			    member->dsp->pcm_slot_rx >= 0 &&
+			    nextm->dsp->pcm_slot_tx >= 0 &&
+			    nextm->dsp->pcm_slot_rx >= 0 &&
+			    nextm->dsp->pcm_slot_tx ==
+			    member->dsp->pcm_slot_rx &&
+			    nextm->dsp->pcm_slot_rx ==
+			    member->dsp->pcm_slot_tx &&
+			    member->dsp->pcm_slot_tx !=
+			    member->dsp->pcm_slot_rx &&
+			    member->dsp->pcm_bank_tx == 0 &&
+			    member->dsp->pcm_bank_rx == 0 &&
+			    nextm->dsp->pcm_bank_tx == 0 &&
+			    nextm->dsp->pcm_bank_rx == 0) {
+				/* all members have same slot */
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s dsp %s & %s stay joined on PCM "
+					    "slot %d (TX) %d (RX) on same chip "
+					    "or one bank PCM)\n", __func__,
+					    member->dsp->name,
+					    nextm->dsp->name,
+					    member->dsp->pcm_slot_tx,
+					    member->dsp->pcm_slot_rx);
+				conf->hardware = 0;
+				conf->software = 1;
+				return;
+			}
+			/* find two new slot */
+			memset(freeslots, 1, sizeof(freeslots));
+			list_for_each_entry(dsp, &dsp_ilist, list) {
+				if (dsp != member->dsp &&
+				    dsp != nextm->dsp &&
+				    member->dsp->features.pcm_id ==
+				    dsp->features.pcm_id) {
+					if (dsp->pcm_slot_rx >= 0 &&
+					    dsp->pcm_slot_rx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_tx] = 0;
+					if (dsp->pcm_slot_tx >= 0 &&
+					    dsp->pcm_slot_tx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_rx] = 0;
+				}
+			}
+			i1 = 0;
+			ii = member->dsp->features.pcm_slots;
+			while (i1 < ii) {
+				if (freeslots[i1])
+					break;
+				i1++;
+			}
+			if (i1 == ii) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s no slot available "
+					    "for %s & %s\n", __func__,
+					    member->dsp->name,
+					    nextm->dsp->name);
+				/* no more slots available */
+				goto conf_software;
+			}
+			i2 = i1+1;
+			while (i2 < ii) {
+				if (freeslots[i2])
+					break;
+				i2++;
+			}
+			if (i2 == ii) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s no slot available "
+					    "for %s & %s\n",
+					    __func__,
+					    member->dsp->name,
+					    nextm->dsp->name);
+				/* no more slots available */
+				goto conf_software;
+			}
+			/* assign free slots */
+			member->dsp->pcm_slot_tx = i1;
+			member->dsp->pcm_slot_rx = i2;
+			nextm->dsp->pcm_slot_tx = i2;
+			nextm->dsp->pcm_slot_rx = i1;
+			member->dsp->pcm_bank_rx = 0;
+			member->dsp->pcm_bank_tx = 0;
+			nextm->dsp->pcm_bank_rx = 0;
+			nextm->dsp->pcm_bank_tx = 0;
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s adding %s & %s to new PCM slot %d "
+				    "(TX) %d (RX) on same chip or one bank "
+				    "PCM, because both members have not "
+				    "crossed slots\n", __func__,
+				    member->dsp->name,
+				    nextm->dsp->name,
+				    member->dsp->pcm_slot_tx,
+				    member->dsp->pcm_slot_rx);
+			dsp_cmx_hw_message(member->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    member->dsp->pcm_slot_tx, member->dsp->pcm_bank_tx,
+			    member->dsp->pcm_slot_rx, member->dsp->pcm_bank_rx);
+			dsp_cmx_hw_message(nextm->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
+			    nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
+			conf->hardware = 1;
+			conf->software = 0;
+			return;
+		}
+	}
+
+	/*
+	 * if we have more than two, we may check if we have a conference
+	 * unit available on the chip. also all members must be on the same
+	 */
+
+	/* if not the same HFC chip */
+	if (same_hfc < 0) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "%s conference %d cannot be formed, because "
+			    "members are on different chips or not "
+			    "on HFC chip\n",
+			    __func__, conf->id);
+		goto conf_software;
+	}
+
+	/* for more than two members.. */
+
+	/* in case of hdlc, we change to software */
+	if (dsp->hdlc)
+		goto conf_software;
+
+	/* if all members already have the same conference */
+	if (all_conf)
+		return;
+
+	/*
+	 * if there is an existing conference, but not all members have joined
+	 */
+	if (current_conf >= 0) {
+join_members:
+		list_for_each_entry(member, &conf->mlist, list) {
+			/* join to current conference */
+			if (member->dsp->hfc_conf == current_conf)
+				continue;
+			/* get a free timeslot first */
+			memset(freeslots, 1, sizeof(freeslots));
+			list_for_each_entry(dsp, &dsp_ilist, list) {
+				/*
+				 * not checking current member, because
+				 * slot will be overwritten.
+				 */
+				if (
+				    dsp != member->dsp &&
+				/* dsp must be on the same PCM */
+				    member->dsp->features.pcm_id ==
+				    dsp->features.pcm_id) {
+					/* dsp must be on a slot */
+					if (dsp->pcm_slot_tx >= 0 &&
+					    dsp->pcm_slot_tx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_tx] = 0;
+					if (dsp->pcm_slot_rx >= 0 &&
+					    dsp->pcm_slot_rx <
+					    sizeof(freeslots))
+						freeslots[dsp->pcm_slot_rx] = 0;
+				}
+			}
+			i = 0;
+			ii = member->dsp->features.pcm_slots;
+			while (i < ii) {
+				if (freeslots[i])
+					break;
+				i++;
+			}
+			if (i == ii) {
+				/* no more slots available */
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s conference %d cannot be formed,"
+					    " because no slot free\n",
+					    __func__, conf->id);
+				goto conf_software;
+			}
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "%s changing dsp %s to HW conference "
+				    "%d slot %d\n", __func__,
+				    member->dsp->name, current_conf, i);
+			/* assign free slot & set PCM & join conf */
+			member->dsp->pcm_slot_tx = i;
+			member->dsp->pcm_slot_rx = i;
+			member->dsp->pcm_bank_tx = 2; /* loop */
+			member->dsp->pcm_bank_rx = 2;
+			member->dsp->hfc_conf = current_conf;
+			dsp_cmx_hw_message(member->dsp, MISDN_CTRL_HFC_PCM_CONN,
+			    i, 2, i, 2);
+			dsp_cmx_hw_message(member->dsp,
+			    MISDN_CTRL_HFC_CONF_JOIN, current_conf, 0, 0, 0);
+		}
+		return;
+	}
+
+	/*
+	 * no member is in a conference yet, so we find a free one
+	 */
+	memset(freeunits, 1, sizeof(freeunits));
+	list_for_each_entry(dsp, &dsp_ilist, list) {
+		/* dsp must be on the same chip */
+		if (dsp->features.hfc_id == same_hfc &&
+		    /* dsp must have joined a HW conference */
+		    dsp->hfc_conf >= 0 &&
+		    /* slot must be within range */
+		    dsp->hfc_conf < 8)
+			freeunits[dsp->hfc_conf] = 0;
+	}
+	i = 0;
+	ii = 8;
+	while (i < ii) {
+		if (freeunits[i])
+			break;
+		i++;
+	}
+	if (i == ii) {
+		/* no more conferences available */
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "%s conference %d cannot be formed, because "
+			    "no conference number free\n",
+			    __func__, conf->id);
+		goto conf_software;
+	}
+	/* join all members */
+	current_conf = i;
+	goto join_members;
+}
+
+
+/*
+ * conf_id != 0: join or change conference
+ * conf_id == 0: split from conference if not already
+ */
+int
+dsp_cmx_conf(struct dsp *dsp, u32 conf_id)
+{
+	int err;
+	struct dsp_conf *conf;
+	struct dsp_conf_member	*member;
+
+	/* if conference doesn't change */
+	if (dsp->conf_id == conf_id)
+		return 0;
+
+	/* first remove us from current conf */
+	if (dsp->conf_id) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG "removing us from conference %d\n",
+				dsp->conf->id);
+		/* remove us from conf */
+		conf = dsp->conf;
+		err = dsp_cmx_del_conf_member(dsp);
+		if (err)
+			return err;
+		dsp->conf_id = 0;
+
+		/* update hardware */
+		dsp_cmx_hardware(NULL, dsp);
+
+		/* conf now empty? */
+		if (list_empty(&conf->mlist)) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "conference is empty, so we remove it.\n");
+			err = dsp_cmx_del_conf(conf);
+			if (err)
+				return err;
+		} else {
+			/* update members left on conf */
+			dsp_cmx_hardware(conf, NULL);
+		}
+	}
+
+	/* if split */
+	if (!conf_id)
+		return 0;
+
+	/* now add us to conf */
+	if (dsp_debug & DEBUG_DSP_CMX)
+		printk(KERN_DEBUG "searching conference %d\n",
+			conf_id);
+	conf = dsp_cmx_search_conf(conf_id);
+	if (!conf) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "conference doesn't exist yet, creating.\n");
+		/* the conference doesn't exist, so we create */
+		conf = dsp_cmx_new_conf(conf_id);
+		if (!conf)
+			return -EINVAL;
+	} else if (!list_empty(&conf->mlist)) {
+		member = list_entry(conf->mlist.next, struct dsp_conf_member,
+			list);
+		if (dsp->hdlc && !member->dsp->hdlc) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "cannot join transparent conference.\n");
+			return -EINVAL;
+		}
+		if (!dsp->hdlc && member->dsp->hdlc) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "cannot join hdlc conference.\n");
+			return -EINVAL;
+		}
+	}
+	/* add conference member */
+	err = dsp_cmx_add_conf_member(dsp, conf);
+	if (err)
+		return err;
+	dsp->conf_id = conf_id;
+
+	/* if we are alone, we do nothing! */
+	if (list_empty(&conf->mlist)) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "we are alone in this conference, so exit.\n");
+		/* update hardware */
+		dsp_cmx_hardware(NULL, dsp);
+		return 0;
+	}
+
+	/* update members on conf */
+	dsp_cmx_hardware(conf, NULL);
+
+	return 0;
+}
+
+
+/*
+ * audio data is received from card
+ */
+void
+dsp_cmx_receive(struct dsp *dsp, struct sk_buff *skb)
+{
+	u8 *d, *p;
+	int len = skb->len;
+	struct mISDNhead *hh = mISDN_HEAD_P(skb);
+	int w, i, ii;
+
+	/* check if we have sompen */
+	if (len < 1)
+		return;
+
+	/* half of the buffer should be larger than maximum packet size */
+	if (len >= CMX_BUFF_HALF) {
+		printk(KERN_ERR
+		    "%s line %d: packet from card is too large (%d bytes). "
+		    "please make card send smaller packets OR increase "
+		    "CMX_BUFF_SIZE\n", __FILE__, __LINE__, len);
+		return;
+	}
+
+	/*
+	 * initialize pointers if not already -
+	 * also add delay if requested by PH_SIGNAL
+	 */
+	if (dsp->rx_init) {
+		dsp->rx_init = 0;
+		if (dsp->features.unordered) {
+			dsp->rx_R = (hh->id & CMX_BUFF_MASK);
+			dsp->rx_W = (dsp->rx_R + dsp->cmx_delay)
+				& CMX_BUFF_MASK;
+		} else {
+			dsp->rx_R = 0;
+			dsp->rx_W = dsp->cmx_delay;
+		}
+	}
+	/* if frame contains time code, write directly */
+	if (dsp->features.unordered) {
+		dsp->rx_W = (hh->id & CMX_BUFF_MASK);
+		/* printk(KERN_DEBUG "%s %08x\n", dsp->name, hh->id); */
+	}
+	/*
+	 * if we underrun (or maybe overrun),
+	 * we set our new read pointer, and write silence to buffer
+	 */
+	if (((dsp->rx_W-dsp->rx_R) & CMX_BUFF_MASK) >= CMX_BUFF_HALF) {
+		if (dsp_debug & DEBUG_DSP_CMX)
+			printk(KERN_DEBUG
+			    "cmx_receive(dsp=%lx): UNDERRUN (or overrun the "
+			    "maximum delay), adjusting read pointer! "
+			    "(inst %s)\n", (u_long)dsp, dsp->name);
+		/* flush buffer */
+		if (dsp->features.unordered) {
+			dsp->rx_R = (hh->id & CMX_BUFF_MASK);
+			dsp->rx_W = (dsp->rx_R + dsp->cmx_delay)
+				& CMX_BUFF_MASK;
+		} else {
+			dsp->rx_R = 0;
+			dsp->rx_W = dsp->cmx_delay;
+		}
+		memset(dsp->rx_buff, dsp_silence, sizeof(dsp->rx_buff));
+	}
+	/* if we have reached double delay, jump back to middle */
+	if (dsp->cmx_delay)
+		if (((dsp->rx_W - dsp->rx_R) & CMX_BUFF_MASK) >=
+		    (dsp->cmx_delay << 1)) {
+			if (dsp_debug & DEBUG_DSP_CMX)
+				printk(KERN_DEBUG
+				    "cmx_receive(dsp=%lx): OVERRUN (because "
+				    "twice the delay is reached), adjusting "
+				    "read pointer! (inst %s)\n",
+				    (u_long)dsp, dsp->name);
+		/* flush buffer */
+		if (dsp->features.unordered) {
+			dsp->rx_R = (hh->id & CMX_BUFF_MASK);
+			dsp->rx_W = (dsp->rx_R + dsp->cmx_delay)
+				& CMX_BUFF_MASK;
+		} else {
+			dsp->rx_R = 0;
+			dsp->rx_W = dsp->cmx_delay;
+		}
+		memset(dsp->rx_buff, dsp_silence, sizeof(dsp->rx_buff));
+	}
+
+	/* show where to write */
+#ifdef CMX_DEBUG
+	printk(KERN_DEBUG
+	    "cmx_receive(dsp=%lx): rx_R(dsp)=%05x rx_W(dsp)=%05x len=%d %s\n",
+	    (u_long)dsp, dsp->rx_R, dsp->rx_W, len, dsp->name);
+#endif
+
+	/* write data into rx_buffer */
+	p = skb->data;
+	d = dsp->rx_buff;
+	w = dsp->rx_W;
+	i = 0;
+	ii = len;
+	while (i < ii) {
+		d[w++ & CMX_BUFF_MASK] = *p++;
+		i++;
+	}
+
+	/* increase write-pointer */
+	dsp->rx_W = ((dsp->rx_W+len) & CMX_BUFF_MASK);
+}
+
+
+/*
+ * send (mixed) audio data to card and control jitter
+ */
+static void
+dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
+{
+	struct dsp_conf *conf = dsp->conf;
+	struct dsp *member, *other;
+	register s32 sample;
+	u8 *d, *p, *q, *o_q;
+	struct sk_buff *nskb, *txskb;
+	int r, rr, t, tt, o_r, o_rr;
+	int preload = 0;
+	struct mISDNhead *hh, *thh;
+
+	/* don't process if: */
+	if (!dsp->b_active) { /* if not active */
+		dsp->last_tx = 0;
+		return;
+	}
+	if (dsp->pcm_slot_tx >= 0 && /* connected to pcm slot */
+	    dsp->tx_R == dsp->tx_W && /* AND no tx-data */
+	    !(dsp->tone.tone && dsp->tone.software)) { /* AND not soft tones */
+		dsp->last_tx = 0;
+		return;
+	}
+
+#ifdef CMX_DEBUG
+	printk(KERN_DEBUG
+	    "SEND members=%d dsp=%s, conf=%p, rx_R=%05x rx_W=%05x\n",
+	    members, dsp->name, conf, dsp->rx_R, dsp->rx_W);
+#endif
+
+	/* preload if we have delay set */
+	if (dsp->cmx_delay && !dsp->last_tx) {
+		preload = len;
+		if (preload < 128)
+			preload = 128;
+	}
+
+	/* PREPARE RESULT */
+	nskb = mI_alloc_skb(len + preload, GFP_ATOMIC);
+	if (!nskb) {
+		printk(KERN_ERR
+		    "FATAL ERROR in mISDN_dsp.o: cannot alloc %d bytes\n",
+		    len + preload);
+		return;
+	}
+	hh = mISDN_HEAD_P(nskb);
+	hh->prim = PH_DATA_REQ;
+	hh->id = 0;
+	dsp->last_tx = 1;
+
+	/* set pointers, indexes and stuff */
+	member = dsp;
+	p = dsp->tx_buff; /* transmit data */
+	q = dsp->rx_buff; /* received data */
+	d = skb_put(nskb, preload + len); /* result */
+	t = dsp->tx_R; /* tx-pointers */
+	tt = dsp->tx_W;
+	r = dsp->rx_R; /* rx-pointers */
+	rr = (r + len) & CMX_BUFF_MASK;
+
+	/* preload with silence, if required */
+	if (preload) {
+		memset(d, dsp_silence, preload);
+		d += preload;
+	}
+
+	/* PROCESS TONES/TX-DATA ONLY */
+	if (dsp->tone.tone && dsp->tone.software) {
+		/* -> copy tone */
+		dsp_tone_copy(dsp, d, len);
+		dsp->tx_R = 0; /* clear tx buffer */
+		dsp->tx_W = 0;
+		goto send_packet;
+	}
+	/* if we have tx-data but do not use mixing */
+	if (!dsp->tx_mix && t != tt) {
+		/* -> send tx-data and continue when not enough */
+#ifdef CMX_TX_DEBUG
+	sprintf(debugbuf, "TX sending (%04x-%04x)%p: ", t, tt, p);
+#endif
+		while (r != rr && t != tt) {
+#ifdef CMX_TX_DEBUG
+			if (strlen(debugbuf) < 48)
+			    sprintf(debugbuf+strlen(debugbuf), " %02x", p[t]);
+#endif
+			*d++ = p[t]; /* write tx_buff */
+			t = (t+1) & CMX_BUFF_MASK;
+			r = (r+1) & CMX_BUFF_MASK;
+		}
+		if (r == rr) {
+			dsp->tx_R = t;
+#ifdef CMX_TX_DEBUG
+	printk(KERN_DEBUG "%s\n", debugbuf);
+#endif
+			goto send_packet;
+		}
+	}
+#ifdef CMX_TX_DEBUG
+	printk(KERN_DEBUG "%s\n", debugbuf);
+#endif
+
+	/* PROCESS DATA (one member / no conf) */
+	if (!conf || members <= 1) {
+		/* -> if echo is NOT enabled */
+		if (!dsp->echo) {
+			/* -> send tx-data if available or use 0-volume */
+			while (r != rr && t != tt) {
+				*d++ = p[t]; /* write tx_buff */
+				t = (t+1) & CMX_BUFF_MASK;
+				r = (r+1) & CMX_BUFF_MASK;
+			}
+			if (r != rr)
+				memset(d, dsp_silence, (rr-r)&CMX_BUFF_MASK);
+		/* -> if echo is enabled */
+		} else {
+			/*
+			 * -> mix tx-data with echo if available,
+			 * or use echo only
+			 */
+			while (r != rr && t != tt) {
+				*d++ = dsp_audio_mix_law[(p[t]<<8)|q[r]];
+				t = (t+1) & CMX_BUFF_MASK;
+				r = (r+1) & CMX_BUFF_MASK;
+			}
+			while (r != rr) {
+				*d++ = q[r]; /* echo */
+				r = (r+1) & CMX_BUFF_MASK;
+			}
+		}
+		dsp->tx_R = t;
+		goto send_packet;
+	}
+	/* PROCESS DATA (two members) */
+#ifdef CMX_CONF_DEBUG
+	if (0) {
+#else
+	if (members == 2) {
+#endif
+		/* "other" becomes other party */
+		other = (list_entry(conf->mlist.next,
+		    struct dsp_conf_member, list))->dsp;
+		if (other == member)
+			other = (list_entry(conf->mlist.prev,
+			    struct dsp_conf_member, list))->dsp;
+		o_q = other->rx_buff; /* received data */
+		o_rr = (other->rx_R + len) & CMX_BUFF_MASK;
+			/* end of rx-pointer */
+		o_r = (o_rr - rr + r) & CMX_BUFF_MASK;
+			/* start rx-pointer at current read position*/
+		/* -> if echo is NOT enabled */
+		if (!dsp->echo) {
+			/*
+			 * -> copy other member's rx-data,
+			 * if tx-data is available, mix
+			 */
+			while (o_r != o_rr && t != tt) {
+				*d++ = dsp_audio_mix_law[(p[t]<<8)|o_q[o_r]];
+				t = (t+1) & CMX_BUFF_MASK;
+				o_r = (o_r+1) & CMX_BUFF_MASK;
+			}
+			while (o_r != o_rr) {
+				*d++ = o_q[o_r];
+				o_r = (o_r+1) & CMX_BUFF_MASK;
+			}
+		/* -> if echo is enabled */
+		} else {
+			/*
+			 * -> mix other member's rx-data with echo,
+			 * if tx-data is available, mix
+			 */
+			while (r != rr && t != tt) {
+				sample = dsp_audio_law_to_s32[p[t]] +
+				    dsp_audio_law_to_s32[q[r]] +
+				    dsp_audio_law_to_s32[o_q[o_r]];
+				if (sample < -32768)
+					sample = -32768;
+				else if (sample > 32767)
+					sample = 32767;
+				*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+				    /* tx-data + rx_data + echo */
+				t = (t+1) & CMX_BUFF_MASK;
+				r = (r+1) & CMX_BUFF_MASK;
+				o_r = (o_r+1) & CMX_BUFF_MASK;
+			}
+			while (r != rr) {
+				*d++ = dsp_audio_mix_law[(q[r]<<8)|o_q[o_r]];
+				r = (r+1) & CMX_BUFF_MASK;
+				o_r = (o_r+1) & CMX_BUFF_MASK;
+			}
+		}
+		dsp->tx_R = t;
+		goto send_packet;
+	}
+#ifdef DSP_NEVER_DEFINED
+	}
+#endif
+	/* PROCESS DATA (three or more members) */
+	/* -> if echo is NOT enabled */
+	if (!dsp->echo) {
+		/*
+		 * -> substract rx-data from conf-data,
+		 * if tx-data is available, mix
+		 */
+		while (r != rr && t != tt) {
+			sample = dsp_audio_law_to_s32[p[t]] + *c++ -
+			    dsp_audio_law_to_s32[q[r]];
+			if (sample < -32768)
+				sample = -32768;
+			else if (sample > 32767)
+				sample = 32767;
+			*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+			    /* conf-rx+tx */
+			r = (r+1) & CMX_BUFF_MASK;
+			t = (t+1) & CMX_BUFF_MASK;
+		}
+		while (r != rr) {
+			sample = *c++ - dsp_audio_law_to_s32[q[r]];
+			if (sample < -32768)
+				sample = -32768;
+			else if (sample > 32767)
+				sample = 32767;
+			*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+			    /* conf-rx */
+			r = (r+1) & CMX_BUFF_MASK;
+		}
+	/* -> if echo is enabled */
+	} else {
+		/*
+		 * -> encode conf-data, if tx-data
+		 * is available, mix
+		 */
+		while (r != rr && t != tt) {
+			sample = dsp_audio_law_to_s32[p[t]] + *c++;
+			if (sample < -32768)
+				sample = -32768;
+			else if (sample > 32767)
+				sample = 32767;
+			*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+			    /* conf(echo)+tx */
+			t = (t+1) & CMX_BUFF_MASK;
+			r = (r+1) & CMX_BUFF_MASK;
+		}
+		while (r != rr) {
+			sample = *c++;
+			if (sample < -32768)
+				sample = -32768;
+			else if (sample > 32767)
+				sample = 32767;
+			*d++ = dsp_audio_s16_to_law[sample & 0xffff];
+			    /* conf(echo) */
+			r = (r+1) & CMX_BUFF_MASK;
+		}
+	}
+	dsp->tx_R = t;
+	goto send_packet;
+
+send_packet:
+	/*
+	 * send tx-data if enabled - don't filter,
+	 * becuase we want what we send, not what we filtered
+	 */
+	if (dsp->tx_data) {
+		/* PREPARE RESULT */
+		txskb = mI_alloc_skb(len, GFP_ATOMIC);
+		if (!txskb) {
+			printk(KERN_ERR
+			    "FATAL ERROR in mISDN_dsp.o: "
+			    "cannot alloc %d bytes\n", len);
+		} else {
+			thh = mISDN_HEAD_P(txskb);
+			thh->prim = DL_DATA_REQ;
+			thh->id = 0;
+			memcpy(skb_put(txskb, len), nskb->data+preload, len);
+			/* queue (trigger later) */
+			skb_queue_tail(&dsp->sendq, txskb);
+		}
+	}
+	/* adjust volume */
+	if (dsp->tx_volume)
+		dsp_change_volume(nskb, dsp->tx_volume);
+	/* pipeline */
+	if (dsp->pipeline.inuse)
+		dsp_pipeline_process_tx(&dsp->pipeline, nskb->data, nskb->len);
+	/* crypt */
+	if (dsp->bf_enable)
+		dsp_bf_encrypt(dsp, nskb->data, nskb->len);
+	/* queue and trigger */
+	skb_queue_tail(&dsp->sendq, nskb);
+	schedule_work(&dsp->workq);
+}
+
+u32	samplecount;
+struct timer_list dsp_spl_tl;
+u32	dsp_spl_jiffies; /* calculate the next time to fire */
+u32	dsp_start_jiffies; /* jiffies at the time, the calculation begins */
+struct timeval dsp_start_tv; /* time at start of calculation */
+
+void
+dsp_cmx_send(void *arg)
+{
+	struct dsp_conf *conf;
+	struct dsp_conf_member *member;
+	struct dsp *dsp;
+	int mustmix, members;
+	s32 mixbuffer[MAX_POLL+100], *c;
+	u8 *p, *q;
+	int r, rr;
+	int jittercheck = 0, delay, i;
+	u_long flags;
+	struct timeval tv;
+	u32 elapsed;
+	s16 length;
+
+	/* lock */
+	spin_lock_irqsave(&dsp_lock, flags);
+
+	if (!dsp_start_tv.tv_sec) {
+		do_gettimeofday(&dsp_start_tv);
+		length = dsp_poll;
+	} else {
+		do_gettimeofday(&tv);
+		elapsed = ((tv.tv_sec - dsp_start_tv.tv_sec) * 8000)
+		    + ((s32)(tv.tv_usec / 125) - (dsp_start_tv.tv_usec / 125));
+		dsp_start_tv.tv_sec = tv.tv_sec;
+		dsp_start_tv.tv_usec = tv.tv_usec;
+		length = elapsed;
+	}
+	if (length > MAX_POLL + 100)
+		length = MAX_POLL + 100;
+/* printk(KERN_DEBUG "len=%d dsp_count=0x%x.%04x dsp_poll_diff=0x%x.%04x\n",
+ length, dsp_count >> 16, dsp_count & 0xffff, dsp_poll_diff >> 16,
+ dsp_poll_diff & 0xffff);
+ */
+
+	/*
+	 * check if jitter needs to be checked
+	 * (this is about every second = 8192 samples)
+	 */
+	samplecount += length;
+	if ((samplecount & 8191) < length)
+		jittercheck = 1;
+
+	/* loop all members that do not require conference mixing */
+	list_for_each_entry(dsp, &dsp_ilist, list) {
+		if (dsp->hdlc)
+			continue;
+		conf = dsp->conf;
+		mustmix = 0;
+		members = 0;
+		if (conf) {
+			members = count_list_member(&conf->mlist);
+#ifdef CMX_CONF_DEBUG
+			if (conf->software && members > 1)
+#else
+			if (conf->software && members > 2)
+#endif
+				mustmix = 1;
+		}
+
+		/* transmission required */
+		if (!mustmix) {
+			dsp_cmx_send_member(dsp, length, mixbuffer, members);
+
+			/*
+			 * unused mixbuffer is given to prevent a
+			 * potential null-pointer-bug
+			 */
+		}
+	}
+
+	/* loop all members that require conference mixing */
+	list_for_each_entry(conf, &conf_ilist, list) {
+		/* count members and check hardware */
+		members = count_list_member(&conf->mlist);
+#ifdef CMX_CONF_DEBUG
+		if (conf->software && members > 1) {
+#else
+		if (conf->software && members > 2) {
+#endif
+			/* check for hdlc conf */
+			member = list_entry(conf->mlist.next,
+				struct dsp_conf_member, list);
+			if (member->dsp->hdlc)
+				continue;
+			/* mix all data */
+			memset(mixbuffer, 0, length*sizeof(s32));
+			list_for_each_entry(member, &conf->mlist, list) {
+				dsp = member->dsp;
+				/* get range of data to mix */
+				c = mixbuffer;
+				q = dsp->rx_buff;
+				r = dsp->rx_R;
+				rr = (r + length) & CMX_BUFF_MASK;
+				/* add member's data */
+				while (r != rr) {
+					*c++ += dsp_audio_law_to_s32[q[r]];
+					r = (r+1) & CMX_BUFF_MASK;
+				}
+			}
+
+			/* process each member */
+			list_for_each_entry(member, &conf->mlist, list) {
+				/* transmission */
+				dsp_cmx_send_member(member->dsp, length,
+				    mixbuffer, members);
+			}
+		}
+	}
+
+	/* delete rx-data, increment buffers, change pointers */
+	list_for_each_entry(dsp, &dsp_ilist, list) {
+		if (dsp->hdlc)
+			continue;
+		p = dsp->rx_buff;
+		q = dsp->tx_buff;
+		r = dsp->rx_R;
+		/* move receive pointer when receiving */
+		if (!dsp->rx_is_off) {
+			rr = (r + length) & CMX_BUFF_MASK;
+			/* delete rx-data */
+			while (r != rr) {
+				p[r] = dsp_silence;
+				r = (r+1) & CMX_BUFF_MASK;
+			}
+			/* increment rx-buffer pointer */
+			dsp->rx_R = r; /* write incremented read pointer */
+		}
+
+		/* check current rx_delay */
+		delay = (dsp->rx_W-dsp->rx_R) & CMX_BUFF_MASK;
+		if (delay >= CMX_BUFF_HALF)
+			delay = 0; /* will be the delay before next write */
+		/* check for lower delay */
+		if (delay < dsp->rx_delay[0])
+			dsp->rx_delay[0] = delay;
+		/* check current tx_delay */
+		delay = (dsp->tx_W-dsp->tx_R) & CMX_BUFF_MASK;
+		if (delay >= CMX_BUFF_HALF)
+			delay = 0; /* will be the delay before next write */
+		/* check for lower delay */
+		if (delay < dsp->tx_delay[0])
+			dsp->tx_delay[0] = delay;
+		if (jittercheck) {
+			/* find the lowest of all rx_delays */
+			delay = dsp->rx_delay[0];
+			i = 1;
+			while (i < MAX_SECONDS_JITTER_CHECK) {
+				if (delay > dsp->rx_delay[i])
+					delay = dsp->rx_delay[i];
+				i++;
+			}
+			/*
+			 * remove rx_delay only if we have delay AND we
+			 * have not preset cmx_delay
+			 */
+			if (delay && !dsp->cmx_delay) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s lowest rx_delay of %d bytes for"
+					    " dsp %s are now removed.\n",
+					    __func__, delay,
+					    dsp->name);
+				r = dsp->rx_R;
+				rr = (r + delay) & CMX_BUFF_MASK;
+				/* delete rx-data */
+				while (r != rr) {
+					p[r] = dsp_silence;
+					r = (r+1) & CMX_BUFF_MASK;
+				}
+				/* increment rx-buffer pointer */
+				dsp->rx_R = r;
+				    /* write incremented read pointer */
+			}
+			/* find the lowest of all tx_delays */
+			delay = dsp->tx_delay[0];
+			i = 1;
+			while (i < MAX_SECONDS_JITTER_CHECK) {
+				if (delay > dsp->tx_delay[i])
+					delay = dsp->tx_delay[i];
+				i++;
+			}
+			/*
+			 * remove delay only if we have delay AND we
+			 * have enabled tx_dejitter
+			 */
+			if (delay && dsp->tx_dejitter) {
+				if (dsp_debug & DEBUG_DSP_CMX)
+					printk(KERN_DEBUG
+					    "%s lowest tx_delay of %d bytes for"
+					    " dsp %s are now removed.\n",
+					    __func__, delay,
+					    dsp->name);
+				r = dsp->tx_R;
+				rr = (r + delay) & CMX_BUFF_MASK;
+				/* delete tx-data */
+				while (r != rr) {
+					q[r] = dsp_silence;
+					r = (r+1) & CMX_BUFF_MASK;
+				}
+				/* increment rx-buffer pointer */
+				dsp->tx_R = r;
+				    /* write incremented read pointer */
+			}
+			/* scroll up delays */
+			i = MAX_SECONDS_JITTER_CHECK - 1;
+			while (i) {
+				dsp->rx_delay[i] = dsp->rx_delay[i-1];
+				dsp->tx_delay[i] = dsp->tx_delay[i-1];
+				i--;
+			}
+			dsp->tx_delay[0] = CMX_BUFF_HALF; /* (infinite) delay */
+			dsp->rx_delay[0] = CMX_BUFF_HALF; /* (infinite) delay */
+		}
+	}
+
+	/* if next event would be in the past ... */
+	if ((s32)(dsp_spl_jiffies+dsp_tics-jiffies) <= 0)
+		dsp_spl_jiffies = jiffies + 1;
+	else
+		dsp_spl_jiffies += dsp_tics;
+
+	dsp_spl_tl.expires = dsp_spl_jiffies;
+	add_timer(&dsp_spl_tl);
+
+	/* unlock */
+	spin_unlock_irqrestore(&dsp_lock, flags);
+}
+
+/*
+ * audio data is transmitted from upper layer to the dsp
+ */
+void
+dsp_cmx_transmit(struct dsp *dsp, struct sk_buff *skb)
+{
+	u_int w, ww;
+	u8 *d, *p;
+	int space; /* todo: , l = skb->len; */
+#ifdef CMX_TX_DEBUG
+	char debugbuf[256] = "";
+#endif
+
+	/* check if there is enough space, and then copy */
+	w = dsp->tx_W;
+	ww = dsp->tx_R;
+	p = dsp->tx_buff;
+	d = skb->data;
+	space = ww-w;
+	if (space <= 0)
+		space += CMX_BUFF_SIZE;
+	/* write-pointer should not overrun nor reach read pointer */
+	if (space-1 < skb->len)
+		/* write to the space we have left */
+		ww = (ww - 1) & CMX_BUFF_MASK;
+	else
+		/* write until all byte are copied */
+		ww = (w + skb->len) & CMX_BUFF_MASK;
+	dsp->tx_W = ww;
+
+	/* show current buffer */
+#ifdef CMX_DEBUG
+	printk(KERN_DEBUG
+	    "cmx_transmit(dsp=%lx) %d bytes to 0x%x-0x%x. %s\n",
+	    (u_long)dsp, (ww-w)&CMX_BUFF_MASK, w, ww, dsp->name);
+#endif
+
+	/* copy transmit data to tx-buffer */
+#ifdef CMX_TX_DEBUG
+	sprintf(debugbuf, "TX getting (%04x-%04x)%p: ", w, ww, p);
+#endif
+	while (w != ww) {
+#ifdef CMX_TX_DEBUG
+		if (strlen(debugbuf) < 48)
+			sprintf(debugbuf+strlen(debugbuf), " %02x", *d);
+#endif
+		p[w] = *d++;
+		w = (w+1) & CMX_BUFF_MASK;
+	}
+#ifdef CMX_TX_DEBUG
+	printk(KERN_DEBUG "%s\n", debugbuf);
+#endif
+
+}
+
+/*
+ * hdlc data is received from card and sent to all members.
+ */
+void
+dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb)
+{
+	struct sk_buff *nskb = NULL;
+	struct dsp_conf_member *member;
+	struct mISDNhead *hh;
+
+	/* not if not active */
+	if (!dsp->b_active)
+		return;
+
+	/* check if we have sompen */
+	if (skb->len < 1)
+		return;
+
+	/* no conf */
+	if (!dsp->conf) {
+		/* in case of hardware (echo) */
+		if (dsp->pcm_slot_tx >= 0)
+			return;
+		if (dsp->echo)
+			nskb = skb_clone(skb, GFP_ATOMIC);
+			if (nskb) {
+				hh = mISDN_HEAD_P(nskb);
+				hh->prim = PH_DATA_REQ;
+				hh->id = 0;
+				skb_queue_tail(&dsp->sendq, nskb);
+				schedule_work(&dsp->workq);
+			}
+		return;
+	}
+	/* in case of hardware conference */
+	if (dsp->conf->hardware)
+		return;
+	list_for_each_entry(member, &dsp->conf->mlist, list) {
+		if (dsp->echo || member->dsp != dsp) {
+			nskb = skb_clone(skb, GFP_ATOMIC);
+			if (nskb) {
+				hh = mISDN_HEAD_P(nskb);
+				hh->prim = PH_DATA_REQ;
+				hh->id = 0;
+				skb_queue_tail(&member->dsp->sendq, nskb);
+				schedule_work(&member->dsp->workq);
+			}
+		}
+	}
+}
+
+
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
new file mode 100644
index 00000000000..2f10ed82c0d
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -0,0 +1,1191 @@
+/*
+ * Author       Andreas Eversberg (jolly@eversberg.eu)
+ * Based on source code structure by
+ *		Karsten Keil (keil@isdn4linux.de)
+ *
+ *		This file is (c) under GNU PUBLIC LICENSE
+ *		For changes and modifications please read
+ *		../../../Documentation/isdn/mISDN.cert
+ *
+ * Thanks to    Karsten Keil (great drivers)
+ *              Cologne Chip (great chips)
+ *
+ * This module does:
+ *		Real-time tone generation
+ *		DTMF detection
+ *		Real-time cross-connection and conferrence
+ *		Compensate jitter due to system load and hardware fault.
+ *		All features are done in kernel space and will be realized
+ *		using hardware, if available and supported by chip set.
+ *		Blowfish encryption/decryption
+ */
+
+/* STRUCTURE:
+ *
+ * The dsp module provides layer 2 for b-channels (64kbit). It provides
+ * transparent audio forwarding with special digital signal processing:
+ *
+ * - (1) generation of tones
+ * - (2) detection of dtmf tones
+ * - (3) crossconnecting and conferences (clocking)
+ * - (4) echo generation for delay test
+ * - (5) volume control
+ * - (6) disable receive data
+ * - (7) pipeline
+ * - (8) encryption/decryption
+ *
+ * Look:
+ *             TX            RX
+ *         ------upper layer------
+ *             |             ^
+ *             |             |(6)
+ *             v             |
+ *       +-----+-------------+-----+
+ *       |(3)(4)                   |
+ *       |           CMX           |
+ *       |                         |
+ *       |           +-------------+
+ *       |           |       ^
+ *       |           |       |
+ *       |+---------+|  +----+----+
+ *       ||(1)      ||  |(2)      |
+ *       ||         ||  |         |
+ *       ||  Tones  ||  |  DTMF   |
+ *       ||         ||  |         |
+ *       ||         ||  |         |
+ *       |+----+----+|  +----+----+
+ *       +-----+-----+       ^
+ *             |             |
+ *             v             |
+ *        +----+----+   +----+----+
+ *        |(5)      |   |(5)      |
+ *        |         |   |         |
+ *        |TX Volume|   |RX Volume|
+ *        |         |   |         |
+ *        |         |   |         |
+ *        +----+----+   +----+----+
+ *             |             ^
+ *             |             |
+ *             v             |
+ *        +----+-------------+----+
+ *        |(7)                    |
+ *        |                       |
+ *        |  Pipeline Processing  |
+ *        |                       |
+ *        |                       |
+ *        +----+-------------+----+
+ *             |             ^
+ *             |             |
+ *             v             |
+ *        +----+----+   +----+----+
+ *        |(8)      |   |(8)      |
+ *        |         |   |         |
+ *        | Encrypt |   | Decrypt |
+ *        |         |   |         |
+ *        |         |   |         |
+ *        +----+----+   +----+----+
+ *             |             ^
+ *             |             |
+ *             v             |
+ *         ------card  layer------
+ *             TX            RX
+ *
+ * Above you can see the logical data flow. If software is used to do the
+ * process, it is actually the real data flow. If hardware is used, data
+ * may not flow, but hardware commands to the card, to provide the data flow
+ * as shown.
+ *
+ * NOTE: The channel must be activated in order to make dsp work, even if
+ * no data flow to the upper layer is intended. Activation can be done
+ * after and before controlling the setting using PH_CONTROL requests.
+ *
+ * DTMF: Will be detected by hardware if possible. It is done before CMX
+ * processing.
+ *
+ * Tones: Will be generated via software if endless looped audio fifos are
+ * not supported by hardware. Tones will override all data from CMX.
+ * It is not required to join a conference to use tones at any time.
+ *
+ * CMX: Is transparent when not used. When it is used, it will do
+ * crossconnections and conferences via software if not possible through
+ * hardware. If hardware capability is available, hardware is used.
+ *
+ * Echo: Is generated by CMX and is used to check performane of hard and
+ * software CMX.
+ *
+ * The CMX has special functions for conferences with one, two and more
+ * members. It will allow different types of data flow. Receive and transmit
+ * data to/form upper layer may be swithed on/off individually without loosing
+ * features of CMX, Tones and DTMF.
+ *
+ * Echo Cancellation: Sometimes we like to cancel echo from the interface.
+ * Note that a VoIP call may not have echo caused by the IP phone. The echo
+ * is generated by the telephone line connected to it. Because the delay
+ * is high, it becomes an echo. RESULT: Echo Cachelation is required if
+ * both echo AND delay is applied to an interface.
+ * Remember that software CMX always generates a more or less delay.
+ *
+ * If all used features can be realized in hardware, and if transmit and/or
+ * receive data ist disabled, the card may not send/receive any data at all.
+ * Not receiving is usefull if only announcements are played. Not sending is
+ * usefull if an answering machine records audio. Not sending and receiving is
+ * usefull during most states of the call. If supported by hardware, tones
+ * will be played without cpu load. Small PBXs and NT-Mode applications will
+ * not need expensive hardware when processing calls.
+ *
+ *
+ * LOCKING:
+ *
+ * When data is received from upper or lower layer (card), the complete dsp
+ * module is locked by a global lock.  This lock MUST lock irq, because it
+ * must lock timer events by DSP poll timer.
+ * When data is ready to be transmitted down, the data is queued and sent
+ * outside lock and timer event.
+ * PH_CONTROL must not change any settings, join or split conference members
+ * during process of data.
+ *
+ * HDLC:
+ *
+ * It works quite the same as transparent, except that HDLC data is forwarded
+ * to all other conference members if no hardware bridging is possible.
+ * Send data will be writte to sendq. Sendq will be sent if confirm is received.
+ * Conference cannot join, if one member is not hdlc.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include "core.h"
+#include "dsp.h"
+
+const char *mISDN_dsp_revision = "2.0";
+
+static int debug;
+static int options;
+static int poll;
+static int dtmfthreshold = 100;
+
+MODULE_AUTHOR("Andreas Eversberg");
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+module_param(options, uint, S_IRUGO | S_IWUSR);
+module_param(poll, uint, S_IRUGO | S_IWUSR);
+module_param(dtmfthreshold, uint, S_IRUGO | S_IWUSR);
+MODULE_LICENSE("GPL");
+
+/*int spinnest = 0;*/
+
+spinlock_t dsp_lock; /* global dsp lock */
+struct list_head dsp_ilist;
+struct list_head conf_ilist;
+int dsp_debug;
+int dsp_options;
+int dsp_poll, dsp_tics;
+
+/* check if rx may be turned off or must be turned on */
+static void
+dsp_rx_off_member(struct dsp *dsp)
+{
+	struct mISDN_ctrl_req	cq;
+	int rx_off = 1;
+
+	if (!dsp->features_rx_off)
+		return;
+
+	/* not disabled */
+	if (!dsp->rx_disabled)
+		rx_off = 0;
+	/* software dtmf */
+	else if (dsp->dtmf.software)
+		rx_off = 0;
+	/* echo in software */
+	else if (dsp->echo && dsp->pcm_slot_tx < 0)
+		rx_off = 0;
+	/* bridge in software */
+	else if (dsp->conf) {
+		if (dsp->conf->software)
+			rx_off = 0;
+	}
+
+	if (rx_off == dsp->rx_is_off)
+		return;
+
+	if (!dsp->ch.peer) {
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: no peer, no rx_off\n",
+				__func__);
+		return;
+	}
+	cq.op = MISDN_CTRL_RX_OFF;
+	cq.p1 = rx_off;
+	if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) {
+		printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n",
+			__func__);
+		return;
+	}
+	dsp->rx_is_off = rx_off;
+	if (dsp_debug & DEBUG_DSP_CORE)
+		printk(KERN_DEBUG "%s: %s set rx_off = %d\n",
+			__func__, dsp->name, rx_off);
+}
+static void
+dsp_rx_off(struct dsp *dsp)
+{
+	struct dsp_conf_member	*member;
+
+	if (dsp_options & DSP_OPT_NOHARDWARE)
+		return;
+
+	/* no conf */
+	if (!dsp->conf) {
+		dsp_rx_off_member(dsp);
+		return;
+	}
+	/* check all members in conf */
+	list_for_each_entry(member, &dsp->conf->mlist, list) {
+		dsp_rx_off_member(member->dsp);
+	}
+}
+
+static int
+dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb)
+{
+	struct		sk_buff *nskb;
+	int ret = 0;
+	int cont;
+	u8 *data;
+	int len;
+
+	if (skb->len < sizeof(int))
+		printk(KERN_ERR "%s: PH_CONTROL message too short\n", __func__);
+	cont = *((int *)skb->data);
+	len = skb->len - sizeof(int);
+	data = skb->data + sizeof(int);
+
+	switch (cont) {
+	case DTMF_TONE_START: /* turn on DTMF */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: start dtmf\n", __func__);
+		if (len == sizeof(int)) {
+			printk(KERN_NOTICE "changing DTMF Threshold "
+				"to %d\n", *((int *)data));
+			dsp->dtmf.treshold = (*(int *)data) * 10000;
+		}
+		/* init goertzel */
+		dsp_dtmf_goertzel_init(dsp);
+
+		/* check dtmf hardware */
+		dsp_dtmf_hardware(dsp);
+		break;
+	case DTMF_TONE_STOP: /* turn off DTMF */
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: stop dtmf\n", __func__);
+		dsp->dtmf.hardware = 0;
+		dsp->dtmf.software = 0;
+		break;
+	case DSP_CONF_JOIN: /* join / update conference */
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		if (*((u32 *)data) == 0)
+			goto conf_split;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: join conference %d\n",
+				__func__, *((u32 *)data));
+		ret = dsp_cmx_conf(dsp, *((u32 *)data));
+			/* dsp_cmx_hardware will also be called here */
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_CONF_SPLIT: /* remove from conference */
+conf_split:
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: release conference\n", __func__);
+		ret = dsp_cmx_conf(dsp, 0);
+			/* dsp_cmx_hardware will also be called here */
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		dsp_rx_off(dsp);
+		break;
+	case DSP_TONE_PATT_ON: /* play tone */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: turn tone 0x%x on\n",
+				__func__, *((int *)skb->data));
+		ret = dsp_tone(dsp, *((int *)data));
+		if (!ret) {
+			dsp_cmx_hardware(dsp->conf, dsp);
+			dsp_rx_off(dsp);
+		}
+		if (!dsp->tone.tone)
+			goto tone_off;
+		break;
+	case DSP_TONE_PATT_OFF: /* stop tone */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: turn tone off\n", __func__);
+		dsp_tone(dsp, 0);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		/* reset tx buffers (user space data) */
+tone_off:
+		dsp->rx_W = 0;
+		dsp->rx_R = 0;
+		break;
+	case DSP_VOL_CHANGE_TX: /* change volume */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->tx_volume = *((int *)data);
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: change tx vol to %d\n",
+				__func__, dsp->tx_volume);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
+		break;
+	case DSP_VOL_CHANGE_RX: /* change volume */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->rx_volume = *((int *)data);
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: change rx vol to %d\n",
+				__func__, dsp->tx_volume);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
+		break;
+	case DSP_ECHO_ON: /* enable echo */
+		dsp->echo = 1; /* soft echo */
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_ECHO_OFF: /* disable echo */
+		dsp->echo = 0;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_RECEIVE_ON: /* enable receive to user space */
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: enable receive to user "
+				"space\n", __func__);
+		dsp->rx_disabled = 0;
+		dsp_rx_off(dsp);
+		break;
+	case DSP_RECEIVE_OFF: /* disable receive to user space */
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: disable receive to "
+				"user space\n", __func__);
+		dsp->rx_disabled = 1;
+		dsp_rx_off(dsp);
+		break;
+	case DSP_MIX_ON: /* enable mixing of tx data */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: enable mixing of "
+				"tx-data with conf mebers\n", __func__);
+		dsp->tx_mix = 1;
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_MIX_OFF: /* disable mixing of tx data */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: disable mixing of "
+				"tx-data with conf mebers\n", __func__);
+		dsp->tx_mix = 0;
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_TXDATA_ON: /* enable txdata */
+		dsp->tx_data = 1;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: enable tx-data\n", __func__);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_TXDATA_OFF: /* disable txdata */
+		dsp->tx_data = 0;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: disable tx-data\n", __func__);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		if (dsp_debug & DEBUG_DSP_CMX)
+			dsp_cmx_debug(dsp);
+		break;
+	case DSP_DELAY: /* use delay algorithm instead of dynamic
+			   jitter algorithm */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < sizeof(int)) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->cmx_delay = (*((int *)data)) << 3;
+			/* miliseconds to samples */
+		if (dsp->cmx_delay >= (CMX_BUFF_HALF>>1))
+			/* clip to half of maximum usable buffer
+			(half of half buffer) */
+			dsp->cmx_delay = (CMX_BUFF_HALF>>1) - 1;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: use delay algorithm to "
+				"compensate jitter (%d samples)\n",
+				__func__, dsp->cmx_delay);
+		break;
+	case DSP_JITTER: /* use dynamic jitter algorithm instead of
+		    delay algorithm */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->cmx_delay = 0;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: use jitter algorithm to "
+				"compensate jitter\n", __func__);
+		break;
+	case DSP_TX_DEJITTER: /* use dynamic jitter algorithm for tx-buffer */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->tx_dejitter = 1;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: use dejitter on TX "
+				"buffer\n", __func__);
+		break;
+	case DSP_TX_DEJ_OFF: /* use tx-buffer without dejittering*/
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		dsp->tx_dejitter = 0;
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: use TX buffer without "
+				"dejittering\n", __func__);
+		break;
+	case DSP_PIPELINE_CFG:
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len > 0 && ((char *)data)[len - 1]) {
+			printk(KERN_DEBUG "%s: pipeline config string "
+				"is not NULL terminated!\n", __func__);
+			ret = -EINVAL;
+		} else {
+			dsp->pipeline.inuse = 1;
+			dsp_cmx_hardware(dsp->conf, dsp);
+			ret = dsp_pipeline_build(&dsp->pipeline,
+				len > 0 ? (char *)data : NULL);
+			dsp_cmx_hardware(dsp->conf, dsp);
+			dsp_rx_off(dsp);
+		}
+		break;
+	case DSP_BF_ENABLE_KEY: /* turn blowfish on */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (len < 4 || len > 56) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: turn blowfish on (key "
+				"not shown)\n", __func__);
+		ret = dsp_bf_init(dsp, (u8 *)data, len);
+		/* set new cont */
+		if (!ret)
+			cont = DSP_BF_ACCEPT;
+		else
+			cont = DSP_BF_REJECT;
+		/* send indication if it worked to set it */
+		nskb = _alloc_mISDN_skb(PH_CONTROL_IND, MISDN_ID_ANY,
+			sizeof(int), &cont, GFP_ATOMIC);
+		if (nskb) {
+			if (dsp->up) {
+				if (dsp->up->send(dsp->up, nskb))
+					dev_kfree_skb(nskb);
+			} else
+				dev_kfree_skb(nskb);
+		}
+		if (!ret) {
+			dsp_cmx_hardware(dsp->conf, dsp);
+			dsp_dtmf_hardware(dsp);
+			dsp_rx_off(dsp);
+		}
+		break;
+	case DSP_BF_DISABLE: /* turn blowfish off */
+		if (dsp->hdlc) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: turn blowfish off\n", __func__);
+		dsp_bf_cleanup(dsp);
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
+		break;
+	default:
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: ctrl req %x unhandled\n",
+				__func__, cont);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static void
+get_features(struct mISDNchannel *ch)
+{
+	struct dsp		*dsp = container_of(ch, struct dsp, ch);
+	struct mISDN_ctrl_req	cq;
+
+	if (dsp_options & DSP_OPT_NOHARDWARE)
+		return;
+	if (!ch->peer) {
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: no peer, no features\n",
+				__func__);
+		return;
+	}
+	memset(&cq, 0, sizeof(cq));
+	cq.op = MISDN_CTRL_GETOP;
+	if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq) < 0) {
+		printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
+			__func__);
+		return;
+	}
+	if (cq.op & MISDN_CTRL_RX_OFF)
+		dsp->features_rx_off = 1;
+	if ((cq.op & MISDN_CTRL_HW_FEATURES_OP)) {
+		cq.op = MISDN_CTRL_HW_FEATURES;
+		*((u_long *)&cq.p1) = (u_long)&dsp->features;
+		if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq)) {
+			printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n",
+				__func__);
+		}
+	} else
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: features not supported for %s\n",
+				__func__, dsp->name);
+}
+
+static int
+dsp_function(struct mISDNchannel *ch,  struct sk_buff *skb)
+{
+	struct dsp			*dsp = container_of(ch, struct dsp, ch);
+	struct mISDNhead	*hh;
+	int			ret = 0;
+	u8			*digits;
+	int			cont;
+	struct			sk_buff *nskb;
+	u_long			flags;
+
+	hh = mISDN_HEAD_P(skb);
+	switch (hh->prim) {
+	/* FROM DOWN */
+	case (PH_DATA_CNF):
+		dsp->data_pending = 0;
+		/* trigger next hdlc frame, if any */
+		if (dsp->hdlc) {
+			spin_lock_irqsave(&dsp_lock, flags);
+			if (dsp->b_active)
+				schedule_work(&dsp->workq);
+			spin_unlock_irqrestore(&dsp_lock, flags);
+		}
+		break;
+	case (PH_DATA_IND):
+	case (DL_DATA_IND):
+		if (skb->len < 1) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp->rx_is_off) {
+			if (dsp_debug & DEBUG_DSP_CORE)
+				printk(KERN_DEBUG "%s: rx-data during rx_off"
+					" for %s\n",
+				__func__, dsp->name);
+		}
+		if (dsp->hdlc) {
+			/* hdlc */
+			spin_lock_irqsave(&dsp_lock, flags);
+			dsp_cmx_hdlc(dsp, skb);
+			spin_unlock_irqrestore(&dsp_lock, flags);
+			if (dsp->rx_disabled) {
+				/* if receive is not allowed */
+				break;
+			}
+			hh->prim = DL_DATA_IND;
+			if (dsp->up)
+				return dsp->up->send(dsp->up, skb);
+			break;
+		}
+
+		/* decrypt if enabled */
+		if (dsp->bf_enable)
+			dsp_bf_decrypt(dsp, skb->data, skb->len);
+		/* pipeline */
+		if (dsp->pipeline.inuse)
+			dsp_pipeline_process_rx(&dsp->pipeline, skb->data,
+				skb->len);
+		/* change volume if requested */
+		if (dsp->rx_volume)
+			dsp_change_volume(skb, dsp->rx_volume);
+
+		/* check if dtmf soft decoding is turned on */
+		if (dsp->dtmf.software) {
+			digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
+				skb->len, (dsp_options&DSP_OPT_ULAW)?1:0);
+			while (*digits) {
+				if (dsp_debug & DEBUG_DSP_DTMF)
+					printk(KERN_DEBUG "%s: digit"
+					    "(%c) to layer %s\n",
+					    __func__, *digits, dsp->name);
+				cont = DTMF_TONE_VAL | *digits;
+				nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
+				    MISDN_ID_ANY, sizeof(int), &cont,
+				    GFP_ATOMIC);
+				if (nskb) {
+					if (dsp->up) {
+						if (dsp->up->send(
+						    dsp->up, nskb))
+						dev_kfree_skb(nskb);
+					} else
+						dev_kfree_skb(nskb);
+				}
+				digits++;
+			}
+		}
+		/* we need to process receive data if software */
+		spin_lock_irqsave(&dsp_lock, flags);
+		if (dsp->pcm_slot_tx < 0 && dsp->pcm_slot_rx < 0) {
+			/* process data from card at cmx */
+			dsp_cmx_receive(dsp, skb);
+		}
+		spin_unlock_irqrestore(&dsp_lock, flags);
+
+		if (dsp->rx_disabled) {
+			/* if receive is not allowed */
+			break;
+		}
+		hh->prim = DL_DATA_IND;
+		if (dsp->up)
+			return dsp->up->send(dsp->up, skb);
+		break;
+	case (PH_CONTROL_IND):
+		if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
+			printk(KERN_DEBUG "%s: PH_CONTROL INDICATION "
+				"received: %x (len %d) %s\n", __func__,
+				hh->id, skb->len, dsp->name);
+		switch (hh->id) {
+		case (DTMF_HFC_COEF): /* getting coefficients */
+			if (!dsp->dtmf.hardware) {
+				if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
+					printk(KERN_DEBUG "%s: ignoring DTMF "
+						"coefficients from HFC\n",
+						__func__);
+				break;
+			}
+			digits = dsp_dtmf_goertzel_decode(dsp, skb->data,
+				skb->len, 2);
+			while (*digits) {
+				int k;
+				struct sk_buff *nskb;
+				if (dsp_debug & DEBUG_DSP_DTMF)
+					printk(KERN_DEBUG "%s: digit"
+					    "(%c) to layer %s\n",
+					    __func__, *digits, dsp->name);
+				k = *digits | DTMF_TONE_VAL;
+				nskb = _alloc_mISDN_skb(PH_CONTROL_IND,
+					MISDN_ID_ANY, sizeof(int), &k,
+					GFP_ATOMIC);
+				if (nskb) {
+					if (dsp->up) {
+						if (dsp->up->send(
+						    dsp->up, nskb))
+						dev_kfree_skb(nskb);
+					} else
+						dev_kfree_skb(nskb);
+				}
+				digits++;
+			}
+			break;
+		case (HFC_VOL_CHANGE_TX): /* change volume */
+			if (skb->len != sizeof(int)) {
+				ret = -EINVAL;
+				break;
+			}
+			spin_lock_irqsave(&dsp_lock, flags);
+			dsp->tx_volume = *((int *)skb->data);
+			if (dsp_debug & DEBUG_DSP_CORE)
+				printk(KERN_DEBUG "%s: change tx volume to "
+					"%d\n", __func__, dsp->tx_volume);
+			dsp_cmx_hardware(dsp->conf, dsp);
+			dsp_dtmf_hardware(dsp);
+			dsp_rx_off(dsp);
+			spin_unlock_irqrestore(&dsp_lock, flags);
+			break;
+		default:
+			if (dsp_debug & DEBUG_DSP_CORE)
+				printk(KERN_DEBUG "%s: ctrl ind %x unhandled "
+					"%s\n", __func__, hh->id, dsp->name);
+			ret = -EINVAL;
+		}
+		break;
+	case (PH_ACTIVATE_IND):
+	case (PH_ACTIVATE_CNF):
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: b_channel is now active %s\n",
+				__func__, dsp->name);
+		/* bchannel now active */
+		spin_lock_irqsave(&dsp_lock, flags);
+		dsp->b_active = 1;
+		dsp->data_pending = 0;
+		dsp->rx_init = 1;
+			/* rx_W and rx_R will be adjusted on first frame */
+		dsp->rx_W = 0;
+		dsp->rx_R = 0;
+		memset(dsp->rx_buff, 0, sizeof(dsp->rx_buff));
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_dtmf_hardware(dsp);
+		dsp_rx_off(dsp);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: done with activation, sending "
+				"confirm to user space. %s\n", __func__,
+				dsp->name);
+		/* send activation to upper layer */
+		hh->prim = DL_ESTABLISH_CNF;
+		if (dsp->up)
+			return dsp->up->send(dsp->up, skb);
+		break;
+	case (PH_DEACTIVATE_IND):
+	case (PH_DEACTIVATE_CNF):
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: b_channel is now inactive %s\n",
+				__func__, dsp->name);
+		/* bchannel now inactive */
+		spin_lock_irqsave(&dsp_lock, flags);
+		dsp->b_active = 0;
+		dsp->data_pending = 0;
+		dsp_cmx_hardware(dsp->conf, dsp);
+		dsp_rx_off(dsp);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		hh->prim = DL_RELEASE_CNF;
+		if (dsp->up)
+			return dsp->up->send(dsp->up, skb);
+		break;
+	/* FROM UP */
+	case (DL_DATA_REQ):
+	case (PH_DATA_REQ):
+		if (skb->len < 1) {
+			ret = -EINVAL;
+			break;
+		}
+		if (dsp->hdlc) {
+			/* hdlc */
+			spin_lock_irqsave(&dsp_lock, flags);
+			if (dsp->b_active) {
+				skb_queue_tail(&dsp->sendq, skb);
+				schedule_work(&dsp->workq);
+			}
+			spin_unlock_irqrestore(&dsp_lock, flags);
+			return 0;
+		}
+		/* send data to tx-buffer (if no tone is played) */
+		if (!dsp->tone.tone) {
+			spin_lock_irqsave(&dsp_lock, flags);
+			dsp_cmx_transmit(dsp, skb);
+			spin_unlock_irqrestore(&dsp_lock, flags);
+		}
+		break;
+	case (PH_CONTROL_REQ):
+		spin_lock_irqsave(&dsp_lock, flags);
+		ret = dsp_control_req(dsp, hh, skb);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		break;
+	case (DL_ESTABLISH_REQ):
+	case (PH_ACTIVATE_REQ):
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: activating b_channel %s\n",
+				__func__, dsp->name);
+		if (dsp->dtmf.hardware || dsp->dtmf.software)
+			dsp_dtmf_goertzel_init(dsp);
+		get_features(ch);
+		/* send ph_activate */
+		hh->prim = PH_ACTIVATE_REQ;
+		if (ch->peer)
+			return ch->recv(ch->peer, skb);
+		break;
+	case (DL_RELEASE_REQ):
+	case (PH_DEACTIVATE_REQ):
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: releasing b_channel %s\n",
+				__func__, dsp->name);
+		spin_lock_irqsave(&dsp_lock, flags);
+		dsp->tone.tone = 0;
+		dsp->tone.hardware = 0;
+		dsp->tone.software = 0;
+		if (timer_pending(&dsp->tone.tl))
+			del_timer(&dsp->tone.tl);
+		if (dsp->conf)
+			dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be
+						 called here */
+		skb_queue_purge(&dsp->sendq);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		hh->prim = PH_DEACTIVATE_REQ;
+		if (ch->peer)
+			return ch->recv(ch->peer, skb);
+		break;
+	default:
+		if (dsp_debug & DEBUG_DSP_CORE)
+			printk(KERN_DEBUG "%s: msg %x unhandled %s\n",
+				__func__, hh->prim, dsp->name);
+		ret = -EINVAL;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static int
+dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct dsp		*dsp = container_of(ch, struct dsp, ch);
+	u_long		flags;
+	int		err = 0;
+
+	if (debug & DEBUG_DSP_CTRL)
+	printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd);
+
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		break;
+	case CLOSE_CHANNEL:
+		if (dsp->ch.peer)
+			dsp->ch.peer->ctrl(dsp->ch.peer, CLOSE_CHANNEL, NULL);
+
+		/* wait until workqueue has finished,
+		 * must lock here, or we may hit send-process currently
+		 * queueing. */
+		spin_lock_irqsave(&dsp_lock, flags);
+		dsp->b_active = 0;
+		spin_unlock_irqrestore(&dsp_lock, flags);
+		/* MUST not be locked, because it waits until queue is done. */
+		cancel_work_sync(&dsp->workq);
+		spin_lock_irqsave(&dsp_lock, flags);
+		if (timer_pending(&dsp->tone.tl))
+			del_timer(&dsp->tone.tl);
+		skb_queue_purge(&dsp->sendq);
+		if (dsp_debug & DEBUG_DSP_CTRL)
+			printk(KERN_DEBUG "%s: releasing member %s\n",
+				__func__, dsp->name);
+		dsp->b_active = 0;
+		dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be called
+					 here */
+		dsp_pipeline_destroy(&dsp->pipeline);
+
+		if (dsp_debug & DEBUG_DSP_CTRL)
+			printk(KERN_DEBUG "%s: remove & destroy object %s\n",
+				__func__, dsp->name);
+		list_del(&dsp->list);
+		spin_unlock_irqrestore(&dsp_lock, flags);
+
+		if (dsp_debug & DEBUG_DSP_CTRL)
+			printk(KERN_DEBUG "%s: dsp instance released\n",
+				__func__);
+		vfree(dsp);
+		module_put(THIS_MODULE);
+		break;
+	}
+	return err;
+}
+
+static void
+dsp_send_bh(struct work_struct *work)
+{
+	struct dsp *dsp = container_of(work, struct dsp, workq);
+	struct sk_buff *skb;
+	struct mISDNhead	*hh;
+
+	if (dsp->hdlc && dsp->data_pending)
+		return; /* wait until data has been acknowledged */
+
+	/* send queued data */
+	while ((skb = skb_dequeue(&dsp->sendq))) {
+		/* in locked date, we must have still data in queue */
+		if (dsp->data_pending) {
+			if (dsp_debug & DEBUG_DSP_CORE)
+				printk(KERN_DEBUG "%s: fifo full %s, this is "
+					"no bug!\n", __func__, dsp->name);
+			/* flush transparent data, if not acked */
+			dev_kfree_skb(skb);
+			continue;
+		}
+		hh = mISDN_HEAD_P(skb);
+		if (hh->prim == DL_DATA_REQ) {
+			/* send packet up */
+			if (dsp->up) {
+				if (dsp->up->send(dsp->up, skb))
+					dev_kfree_skb(skb);
+			} else
+				dev_kfree_skb(skb);
+		} else {
+			/* send packet down */
+			if (dsp->ch.peer) {
+				dsp->data_pending = 1;
+				if (dsp->ch.recv(dsp->ch.peer, skb)) {
+					dev_kfree_skb(skb);
+					dsp->data_pending = 0;
+				}
+			} else
+				dev_kfree_skb(skb);
+		}
+	}
+}
+
+static int
+dspcreate(struct channel_req *crq)
+{
+	struct dsp		*ndsp;
+	u_long		flags;
+
+	if (crq->protocol != ISDN_P_B_L2DSP
+	 && crq->protocol != ISDN_P_B_L2DSPHDLC)
+		return -EPROTONOSUPPORT;
+	ndsp = vmalloc(sizeof(struct dsp));
+	if (!ndsp) {
+		printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__);
+		return -ENOMEM;
+	}
+	memset(ndsp, 0, sizeof(struct dsp));
+	if (dsp_debug & DEBUG_DSP_CTRL)
+		printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__);
+
+	/* default enabled */
+	INIT_WORK(&ndsp->workq, (void *)dsp_send_bh);
+	skb_queue_head_init(&ndsp->sendq);
+	ndsp->ch.send = dsp_function;
+	ndsp->ch.ctrl = dsp_ctrl;
+	ndsp->up = crq->ch;
+	crq->ch = &ndsp->ch;
+	if (crq->protocol == ISDN_P_B_L2DSP) {
+		crq->protocol = ISDN_P_B_RAW;
+		ndsp->hdlc = 0;
+	} else {
+		crq->protocol = ISDN_P_B_HDLC;
+		ndsp->hdlc = 1;
+	}
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n",
+			__func__);
+
+	sprintf(ndsp->name, "DSP_C%x(0x%p)",
+		ndsp->up->st->dev->id + 1, ndsp);
+	/* set frame size to start */
+	ndsp->features.hfc_id = -1; /* current PCM id */
+	ndsp->features.pcm_id = -1; /* current PCM id */
+	ndsp->pcm_slot_rx = -1; /* current CPM slot */
+	ndsp->pcm_slot_tx = -1;
+	ndsp->pcm_bank_rx = -1;
+	ndsp->pcm_bank_tx = -1;
+	ndsp->hfc_conf = -1; /* current conference number */
+	/* set tone timer */
+	ndsp->tone.tl.function = (void *)dsp_tone_timeout;
+	ndsp->tone.tl.data = (long) ndsp;
+	init_timer(&ndsp->tone.tl);
+
+	if (dtmfthreshold < 20 || dtmfthreshold > 500)
+		dtmfthreshold = 200;
+	ndsp->dtmf.treshold = dtmfthreshold*10000;
+
+	/* init pipeline append to list */
+	spin_lock_irqsave(&dsp_lock, flags);
+	dsp_pipeline_init(&ndsp->pipeline);
+	list_add_tail(&ndsp->list, &dsp_ilist);
+	spin_unlock_irqrestore(&dsp_lock, flags);
+
+	return 0;
+}
+
+
+static struct Bprotocol DSP = {
+	.Bprotocols = (1 << (ISDN_P_B_L2DSP & ISDN_P_B_MASK))
+		| (1 << (ISDN_P_B_L2DSPHDLC & ISDN_P_B_MASK)),
+	.name = "dsp",
+	.create = dspcreate
+};
+
+static int dsp_init(void)
+{
+	int err;
+	int tics;
+
+	printk(KERN_INFO "DSP modul %s\n", mISDN_dsp_revision);
+
+	dsp_options = options;
+	dsp_debug = debug;
+
+	/* set packet size */
+	dsp_poll = poll;
+	if (dsp_poll) {
+		if (dsp_poll > MAX_POLL) {
+			printk(KERN_ERR "%s: Wrong poll value (%d), use %d "
+				"maximum.\n", __func__, poll, MAX_POLL);
+			err = -EINVAL;
+			return err;
+		}
+		if (dsp_poll < 8) {
+			printk(KERN_ERR "%s: Wrong poll value (%d), use 8 "
+				"minimum.\n", __func__, dsp_poll);
+			err = -EINVAL;
+			return err;
+		}
+		dsp_tics = poll * HZ / 8000;
+		if (dsp_tics * 8000 != poll * HZ) {
+			printk(KERN_INFO "mISDN_dsp: Cannot clock every %d "
+				"samples (0,125 ms). It is not a multiple of "
+				"%d HZ.\n", poll, HZ);
+			err = -EINVAL;
+			return err;
+		}
+	} else {
+		poll = 8;
+		while (poll <= MAX_POLL) {
+			tics = poll * HZ / 8000;
+			if (tics * 8000 == poll * HZ) {
+				dsp_tics = tics;
+				dsp_poll = poll;
+				if (poll >= 64)
+					break;
+			}
+			poll++;
+		}
+	}
+	if (dsp_poll == 0) {
+		printk(KERN_INFO "mISDN_dsp: There is no multiple of kernel "
+			"clock that equals exactly the duration of 8-256 "
+			"samples. (Choose kernel clock speed like 100, 250, "
+			"300, 1000)\n");
+		err = -EINVAL;
+		return err;
+	}
+	printk(KERN_INFO "mISDN_dsp: DSP clocks every %d samples. This equals "
+		"%d jiffies.\n", dsp_poll, dsp_tics);
+
+	spin_lock_init(&dsp_lock);
+	INIT_LIST_HEAD(&dsp_ilist);
+	INIT_LIST_HEAD(&conf_ilist);
+
+	/* init conversion tables */
+	dsp_audio_generate_law_tables();
+	dsp_silence = (dsp_options&DSP_OPT_ULAW)?0xff:0x2a;
+	dsp_audio_law_to_s32 = (dsp_options&DSP_OPT_ULAW)?dsp_audio_ulaw_to_s32:
+		dsp_audio_alaw_to_s32;
+	dsp_audio_generate_s2law_table();
+	dsp_audio_generate_seven();
+	dsp_audio_generate_mix_table();
+	if (dsp_options & DSP_OPT_ULAW)
+		dsp_audio_generate_ulaw_samples();
+	dsp_audio_generate_volume_changes();
+
+	err = dsp_pipeline_module_init();
+	if (err) {
+		printk(KERN_ERR "mISDN_dsp: Can't initialize pipeline, "
+			"error(%d)\n", err);
+		return err;
+	}
+
+	err = mISDN_register_Bprotocol(&DSP);
+	if (err) {
+		printk(KERN_ERR "Can't register %s error(%d)\n", DSP.name, err);
+		return err;
+	}
+
+	/* set sample timer */
+	dsp_spl_tl.function = (void *)dsp_cmx_send;
+	dsp_spl_tl.data = 0;
+	init_timer(&dsp_spl_tl);
+	dsp_spl_tl.expires = jiffies + dsp_tics;
+	dsp_spl_jiffies = dsp_spl_tl.expires;
+	add_timer(&dsp_spl_tl);
+
+	return 0;
+}
+
+
+static void dsp_cleanup(void)
+{
+	mISDN_unregister_Bprotocol(&DSP);
+
+	if (timer_pending(&dsp_spl_tl))
+		del_timer(&dsp_spl_tl);
+
+	if (!list_empty(&dsp_ilist)) {
+		printk(KERN_ERR "mISDN_dsp: Audio DSP object inst list not "
+			"empty.\n");
+	}
+	if (!list_empty(&conf_ilist)) {
+		printk(KERN_ERR "mISDN_dsp: Conference list not empty. Not "
+			"all memory freed.\n");
+	}
+
+	dsp_pipeline_module_exit();
+}
+
+module_init(dsp_init);
+module_exit(dsp_cleanup);
+
diff --git a/drivers/isdn/mISDN/dsp_dtmf.c b/drivers/isdn/mISDN/dsp_dtmf.c
new file mode 100644
index 00000000000..efc371c1f0d
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_dtmf.c
@@ -0,0 +1,303 @@
+/*
+ * DTMF decoder.
+ *
+ * Copyright            by Andreas Eversberg (jolly@eversberg.eu)
+ *			based on different decoders such as ISDN4Linux
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+
+#define NCOEFF            8     /* number of frequencies to be analyzed */
+
+/* For DTMF recognition:
+ * 2 * cos(2 * PI * k / N) precalculated for all k
+ */
+static u64 cos2pik[NCOEFF] =
+{
+	/* k << 15 (source: hfc-4s/8s documentation (www.colognechip.de)) */
+	55960, 53912, 51402, 48438, 38146, 32650, 26170, 18630
+};
+
+/* digit matrix */
+static char dtmf_matrix[4][4] =
+{
+	{'1', '2', '3', 'A'},
+	{'4', '5', '6', 'B'},
+	{'7', '8', '9', 'C'},
+	{'*', '0', '#', 'D'}
+};
+
+/* dtmf detection using goertzel algorithm
+ * init function
+ */
+void dsp_dtmf_goertzel_init(struct dsp *dsp)
+{
+	dsp->dtmf.size = 0;
+	dsp->dtmf.lastwhat = '\0';
+	dsp->dtmf.lastdigit = '\0';
+	dsp->dtmf.count = 0;
+}
+
+/* check for hardware or software features
+ */
+void dsp_dtmf_hardware(struct dsp *dsp)
+{
+	int hardware = 1;
+
+	if (!dsp->features.hfc_dtmf)
+		hardware = 0;
+
+	/* check for volume change */
+	if (dsp->tx_volume) {
+		if (dsp_debug & DEBUG_DSP_DTMF)
+			printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, "
+				"because tx_volume is changed\n",
+				__func__, dsp->name);
+		hardware = 0;
+	}
+	if (dsp->rx_volume) {
+		if (dsp_debug & DEBUG_DSP_DTMF)
+			printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, "
+				"because rx_volume is changed\n",
+				__func__, dsp->name);
+		hardware = 0;
+	}
+	/* check if encryption is enabled */
+	if (dsp->bf_enable) {
+		if (dsp_debug & DEBUG_DSP_DTMF)
+			printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, "
+				"because encryption is enabled\n",
+				__func__, dsp->name);
+		hardware = 0;
+	}
+	/* check if pipeline exists */
+	if (dsp->pipeline.inuse) {
+		if (dsp_debug & DEBUG_DSP_DTMF)
+			printk(KERN_DEBUG "%s dsp %s cannot do hardware DTMF, "
+				"because pipeline exists.\n",
+				__func__, dsp->name);
+		hardware = 0;
+	}
+
+	dsp->dtmf.hardware = hardware;
+	dsp->dtmf.software = !hardware;
+}
+
+
+/*************************************************************
+ * calculate the coefficients of the given sample and decode *
+ *************************************************************/
+
+/* the given sample is decoded. if the sample is not long enough for a
+ * complete frame, the decoding is finished and continued with the next
+ * call of this function.
+ *
+ * the algorithm is very good for detection with a minimum of errors. i
+ * tested it allot. it even works with very short tones (40ms). the only
+ * disadvantage is, that it doesn't work good with different volumes of both
+ * tones. this will happen, if accoustically coupled dialers are used.
+ * it sometimes detects tones during speach, which is normal for decoders.
+ * use sequences to given commands during calls.
+ *
+ * dtmf - points to a structure of the current dtmf state
+ * spl and len - the sample
+ * fmt - 0 = alaw, 1 = ulaw, 2 = coefficients from HFC DTMF hw-decoder
+ */
+
+u8
+*dsp_dtmf_goertzel_decode(struct dsp *dsp, u8 *data, int len, int fmt)
+{
+	u8 what;
+	int size;
+	signed short *buf;
+	s32 sk, sk1, sk2;
+	int k, n, i;
+	s32 *hfccoeff;
+	s32 result[NCOEFF], tresh, treshl;
+	int lowgroup, highgroup;
+	s64 cos2pik_;
+
+	dsp->dtmf.digits[0] = '\0';
+
+	/* Note: The function will loop until the buffer has not enough samples
+	 * left to decode a full frame.
+	 */
+again:
+	/* convert samples */
+	size = dsp->dtmf.size;
+	buf = dsp->dtmf.buffer;
+	switch (fmt) {
+	case 0: /* alaw */
+	case 1: /* ulaw */
+		while (size < DSP_DTMF_NPOINTS && len) {
+			buf[size++] = dsp_audio_law_to_s32[*data++];
+			len--;
+		}
+		break;
+
+	case 2: /* HFC coefficients */
+	default:
+		if (len < 64) {
+			if (len > 0)
+				printk(KERN_ERR "%s: coefficients have invalid "
+					"size. (is=%d < must=%d)\n",
+					__func__, len, 64);
+			return dsp->dtmf.digits;
+		}
+		hfccoeff = (s32 *)data;
+		for (k = 0; k < NCOEFF; k++) {
+			sk2 = (*hfccoeff++)>>4;
+			sk = (*hfccoeff++)>>4;
+			if (sk > 32767 || sk < -32767 || sk2 > 32767
+			    || sk2 < -32767)
+				printk(KERN_WARNING
+					"DTMF-Detection overflow\n");
+			/* compute |X(k)|**2 */
+			result[k] =
+				 (sk * sk) -
+				 (((cos2pik[k] * sk) >> 15) * sk2) +
+				 (sk2 * sk2);
+		}
+		data += 64;
+		len -= 64;
+		goto coefficients;
+		break;
+	}
+	dsp->dtmf.size = size;
+
+	if (size < DSP_DTMF_NPOINTS)
+		return dsp->dtmf.digits;
+
+	dsp->dtmf.size = 0;
+
+	/* now we have a full buffer of signed long samples - we do goertzel */
+	for (k = 0; k < NCOEFF; k++) {
+		sk = 0;
+		sk1 = 0;
+		sk2 = 0;
+		buf = dsp->dtmf.buffer;
+		cos2pik_ = cos2pik[k];
+		for (n = 0; n < DSP_DTMF_NPOINTS; n++) {
+			sk = ((cos2pik_*sk1)>>15) - sk2 + (*buf++);
+			sk2 = sk1;
+			sk1 = sk;
+		}
+		sk >>= 8;
+		sk2 >>= 8;
+		if (sk > 32767 || sk < -32767 || sk2 > 32767 || sk2 < -32767)
+			printk(KERN_WARNING "DTMF-Detection overflow\n");
+		/* compute |X(k)|**2 */
+		result[k] =
+			(sk * sk) -
+			(((cos2pik[k] * sk) >> 15) * sk2) +
+			(sk2 * sk2);
+	}
+
+	/* our (squared) coefficients have been calculated, we need to process
+	 * them.
+	 */
+coefficients:
+	tresh = 0;
+	for (i = 0; i < NCOEFF; i++) {
+		if (result[i] < 0)
+			result[i] = 0;
+		if (result[i] > dsp->dtmf.treshold) {
+			if (result[i] > tresh)
+				tresh = result[i];
+		}
+	}
+
+	if (tresh == 0) {
+		what = 0;
+		goto storedigit;
+	}
+
+	if (dsp_debug & DEBUG_DSP_DTMFCOEFF)
+		printk(KERN_DEBUG "a %3d %3d %3d %3d %3d %3d %3d %3d"
+			" tr:%3d r %3d %3d %3d %3d %3d %3d %3d %3d\n",
+			result[0]/10000, result[1]/10000, result[2]/10000,
+			result[3]/10000, result[4]/10000, result[5]/10000,
+			result[6]/10000, result[7]/10000, tresh/10000,
+			result[0]/(tresh/100), result[1]/(tresh/100),
+			result[2]/(tresh/100), result[3]/(tresh/100),
+			result[4]/(tresh/100), result[5]/(tresh/100),
+			result[6]/(tresh/100), result[7]/(tresh/100));
+
+	/* calc digit (lowgroup/highgroup) */
+	lowgroup = -1;
+	highgroup = -1;
+	treshl = tresh >> 3;  /* tones which are not on, must be below 9 dB */
+	tresh = tresh >> 2;  /* touchtones must match within 6 dB */
+	for (i = 0; i < NCOEFF; i++) {
+		if (result[i] < treshl)
+			continue;  /* ignore */
+		if (result[i] < tresh) {
+			lowgroup = -1;
+			highgroup = -1;
+			break;  /* noise inbetween */
+		}
+		/* good level found. This is allowed only one time per group */
+		if (i < NCOEFF/2) {
+			/* lowgroup */
+			if (lowgroup >= 0) {
+				/* Bad. Another tone found. */
+				lowgroup = -1;
+				break;
+			} else
+				lowgroup = i;
+		} else {
+			/* higroup */
+			if (highgroup >= 0) {
+				/* Bad. Another tone found. */
+				highgroup = -1;
+				break;
+			} else
+				highgroup = i-(NCOEFF/2);
+		}
+	}
+
+	/* get digit or null */
+	what = 0;
+	if (lowgroup >= 0 && highgroup >= 0)
+		what = dtmf_matrix[lowgroup][highgroup];
+
+storedigit:
+	if (what && (dsp_debug & DEBUG_DSP_DTMF))
+		printk(KERN_DEBUG "DTMF what: %c\n", what);
+
+	if (dsp->dtmf.lastwhat != what)
+		dsp->dtmf.count = 0;
+
+	/* the tone (or no tone) must remain 3 times without change */
+	if (dsp->dtmf.count == 2) {
+		if (dsp->dtmf.lastdigit != what) {
+			dsp->dtmf.lastdigit = what;
+			if (what) {
+				if (dsp_debug & DEBUG_DSP_DTMF)
+					printk(KERN_DEBUG "DTMF digit: %c\n",
+						what);
+				if ((strlen(dsp->dtmf.digits)+1)
+					< sizeof(dsp->dtmf.digits)) {
+					dsp->dtmf.digits[strlen(
+						dsp->dtmf.digits)+1] = '\0';
+					dsp->dtmf.digits[strlen(
+						dsp->dtmf.digits)] = what;
+				}
+			}
+		}
+	} else
+		dsp->dtmf.count++;
+
+	dsp->dtmf.lastwhat = what;
+
+	goto again;
+}
+
+
diff --git a/drivers/isdn/mISDN/dsp_ecdis.h b/drivers/isdn/mISDN/dsp_ecdis.h
new file mode 100644
index 00000000000..8a20af43308
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_ecdis.h
@@ -0,0 +1,110 @@
+/*
+ * SpanDSP - a series of DSP components for telephony
+ *
+ * ec_disable_detector.h - A detector which should eventually meet the
+ *                         G.164/G.165 requirements for detecting the
+ *                         2100Hz echo cancellor disable tone.
+ *
+ * Written by Steve Underwood <steveu@coppice.org>
+ *
+ * Copyright (C) 2001 Steve Underwood
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "dsp_biquad.h"
+
+struct ec_disable_detector_state {
+	struct biquad2_state notch;
+	int notch_level;
+	int channel_level;
+	int tone_present;
+	int tone_cycle_duration;
+	int good_cycles;
+	int hit;
+};
+
+
+#define FALSE 0
+#define TRUE (!FALSE)
+
+static inline void
+echo_can_disable_detector_init(struct ec_disable_detector_state *det)
+{
+    /* Elliptic notch */
+    /* This is actually centred at 2095Hz, but gets the balance we want, due
+       to the asymmetric walls of the notch */
+	biquad2_init(&det->notch,
+		(int32_t) (-0.7600000*32768.0),
+		(int32_t) (-0.1183852*32768.0),
+		(int32_t) (-0.5104039*32768.0),
+		(int32_t) (0.1567596*32768.0),
+		(int32_t) (1.0000000*32768.0));
+
+	det->channel_level = 0;
+	det->notch_level = 0;
+	det->tone_present = FALSE;
+	det->tone_cycle_duration = 0;
+	det->good_cycles = 0;
+	det->hit = 0;
+}
+/*- End of function --------------------------------------------------------*/
+
+static inline int
+echo_can_disable_detector_update(struct ec_disable_detector_state *det,
+int16_t amp)
+{
+	int16_t notched;
+
+	notched = biquad2(&det->notch, amp);
+	/* Estimate the overall energy in the channel, and the energy in
+	   the notch (i.e. overall channel energy - tone energy => noise).
+	   Use abs instead of multiply for speed (is it really faster?).
+	   Damp the overall energy a little more for a stable result.
+	   Damp the notch energy a little less, so we don't damp out the
+	   blip every time the phase reverses */
+	det->channel_level += ((abs(amp) - det->channel_level) >> 5);
+	det->notch_level += ((abs(notched) - det->notch_level) >> 4);
+	if (det->channel_level > 280) {
+		/* There is adequate energy in the channel.
+		 Is it mostly at 2100Hz? */
+		if (det->notch_level*6 < det->channel_level) {
+			/* The notch says yes, so we have the tone. */
+			if (!det->tone_present) {
+				/* Do we get a kick every 450+-25ms? */
+				if (det->tone_cycle_duration >= 425*8
+					&& det->tone_cycle_duration <= 475*8) {
+					det->good_cycles++;
+					if (det->good_cycles > 2)
+					det->hit = TRUE;
+				}
+				det->tone_cycle_duration = 0;
+			}
+			det->tone_present = TRUE;
+		} else
+			det->tone_present = FALSE;
+		det->tone_cycle_duration++;
+	} else {
+		det->tone_present = FALSE;
+		det->tone_cycle_duration = 0;
+		det->good_cycles = 0;
+	}
+	return det->hit;
+}
+/*- End of function --------------------------------------------------------*/
+/*- End of file ------------------------------------------------------------*/
diff --git a/drivers/isdn/mISDN/dsp_hwec.c b/drivers/isdn/mISDN/dsp_hwec.c
new file mode 100644
index 00000000000..eb892d9dd5c
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_hwec.c
@@ -0,0 +1,138 @@
+/*
+ * dsp_hwec.c:
+ * builtin mISDN dsp pipeline element for enabling the hw echocanceller
+ *
+ * Copyright (C) 2007, Nadi Sarrar
+ *
+ * Nadi Sarrar <nadi@beronet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mISDNdsp.h>
+#include <linux/mISDNif.h>
+#include "core.h"
+#include "dsp.h"
+#include "dsp_hwec.h"
+
+static struct mISDN_dsp_element_arg args[] = {
+	{ "deftaps", "128", "Set the number of taps of cancellation." },
+};
+
+static struct mISDN_dsp_element dsp_hwec_p = {
+	.name = "hwec",
+	.new = NULL,
+	.free = NULL,
+	.process_tx = NULL,
+	.process_rx = NULL,
+	.num_args = sizeof(args) / sizeof(struct mISDN_dsp_element_arg),
+	.args = args,
+};
+struct mISDN_dsp_element *dsp_hwec = &dsp_hwec_p;
+
+void dsp_hwec_enable(struct dsp *dsp, const char *arg)
+{
+	int deftaps = 128,
+		len;
+	struct mISDN_ctrl_req	cq;
+
+	if (!dsp) {
+		printk(KERN_ERR "%s: failed to enable hwec: dsp is NULL\n",
+			__func__);
+		return;
+	}
+
+	if (!arg)
+		goto _do;
+
+	len = strlen(arg);
+	if (!len)
+		goto _do;
+
+	{
+		char _dup[len + 1];
+		char *dup, *tok, *name, *val;
+		int tmp;
+
+		strcpy(_dup, arg);
+		dup = _dup;
+
+		while ((tok = strsep(&dup, ","))) {
+			if (!strlen(tok))
+				continue;
+			name = strsep(&tok, "=");
+			val = tok;
+
+			if (!val)
+				continue;
+
+			if (!strcmp(name, "deftaps")) {
+				if (sscanf(val, "%d", &tmp) == 1)
+					deftaps = tmp;
+			}
+		}
+	}
+
+_do:
+	printk(KERN_DEBUG "%s: enabling hwec with deftaps=%d\n",
+		__func__, deftaps);
+	memset(&cq, 0, sizeof(cq));
+	cq.op = MISDN_CTRL_HFC_ECHOCAN_ON;
+	cq.p1 = deftaps;
+	if (!dsp->ch.peer->ctrl(&dsp->ch, CONTROL_CHANNEL, &cq)) {
+		printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
+			__func__);
+		return;
+	}
+}
+
+void dsp_hwec_disable(struct dsp *dsp)
+{
+	struct mISDN_ctrl_req	cq;
+
+	if (!dsp) {
+		printk(KERN_ERR "%s: failed to disable hwec: dsp is NULL\n",
+			__func__);
+		return;
+	}
+
+	printk(KERN_DEBUG "%s: disabling hwec\n", __func__);
+	memset(&cq, 0, sizeof(cq));
+	cq.op = MISDN_CTRL_HFC_ECHOCAN_OFF;
+	if (!dsp->ch.peer->ctrl(&dsp->ch, CONTROL_CHANNEL, &cq)) {
+		printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n",
+			__func__);
+		return;
+	}
+}
+
+int dsp_hwec_init(void)
+{
+	mISDN_dsp_element_register(dsp_hwec);
+
+	return 0;
+}
+
+void dsp_hwec_exit(void)
+{
+	mISDN_dsp_element_unregister(dsp_hwec);
+}
+
diff --git a/drivers/isdn/mISDN/dsp_hwec.h b/drivers/isdn/mISDN/dsp_hwec.h
new file mode 100644
index 00000000000..eebe80c3f71
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_hwec.h
@@ -0,0 +1,10 @@
+/*
+ * dsp_hwec.h
+ */
+
+extern struct mISDN_dsp_element *dsp_hwec;
+extern void dsp_hwec_enable(struct dsp *dsp, const char *arg);
+extern void dsp_hwec_disable(struct dsp *dsp);
+extern int  dsp_hwec_init(void);
+extern void dsp_hwec_exit(void);
+
diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c
new file mode 100644
index 00000000000..850260ab57d
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_pipeline.c
@@ -0,0 +1,348 @@
+/*
+ * dsp_pipeline.c: pipelined audio processing
+ *
+ * Copyright (C) 2007, Nadi Sarrar
+ *
+ * Nadi Sarrar <nadi@beronet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "dsp.h"
+#include "dsp_hwec.h"
+
+/* uncomment for debugging */
+/*#define PIPELINE_DEBUG*/
+
+struct dsp_pipeline_entry {
+	struct mISDN_dsp_element *elem;
+	void                *p;
+	struct list_head     list;
+};
+struct dsp_element_entry {
+	struct mISDN_dsp_element *elem;
+	struct device	     dev;
+	struct list_head     list;
+};
+
+static LIST_HEAD(dsp_elements);
+
+/* sysfs */
+static struct class *elements_class;
+
+static ssize_t
+attr_show_args(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct mISDN_dsp_element *elem = dev_get_drvdata(dev);
+	ssize_t len = 0;
+	int i = 0;
+
+	*buf = 0;
+	for (; i < elem->num_args; ++i)
+		len = sprintf(buf, "%sName:        %s\n%s%s%sDescription: %s\n"
+			"\n", buf,
+			  elem->args[i].name,
+			  elem->args[i].def ? "Default:     " : "",
+			  elem->args[i].def ? elem->args[i].def : "",
+			  elem->args[i].def ? "\n" : "",
+			  elem->args[i].desc);
+
+	return len;
+}
+
+static struct device_attribute element_attributes[] = {
+	__ATTR(args, 0444, attr_show_args, NULL),
+};
+
+int mISDN_dsp_element_register(struct mISDN_dsp_element *elem)
+{
+	struct dsp_element_entry *entry;
+	int ret, i;
+
+	if (!elem)
+		return -EINVAL;
+
+	entry = kzalloc(sizeof(struct dsp_element_entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	entry->elem = elem;
+
+	entry->dev.class = elements_class;
+	dev_set_drvdata(&entry->dev, elem);
+	snprintf(entry->dev.bus_id, BUS_ID_SIZE, elem->name);
+	ret = device_register(&entry->dev);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to register %s\n",
+			__func__, elem->name);
+		goto err1;
+	}
+
+	for (i = 0; i < (sizeof(element_attributes)
+		/ sizeof(struct device_attribute)); ++i)
+		ret = device_create_file(&entry->dev,
+				&element_attributes[i]);
+		if (ret) {
+			printk(KERN_ERR "%s: failed to create device file\n",
+				__func__);
+			goto err2;
+		}
+
+	list_add_tail(&entry->list, &dsp_elements);
+
+	printk(KERN_DEBUG "%s: %s registered\n", __func__, elem->name);
+
+	return 0;
+
+err2:
+	device_unregister(&entry->dev);
+err1:
+	kfree(entry);
+	return ret;
+}
+EXPORT_SYMBOL(mISDN_dsp_element_register);
+
+void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem)
+{
+	struct dsp_element_entry *entry, *n;
+
+	if (!elem)
+		return;
+
+	list_for_each_entry_safe(entry, n, &dsp_elements, list)
+		if (entry->elem == elem) {
+			list_del(&entry->list);
+			device_unregister(&entry->dev);
+			kfree(entry);
+			printk(KERN_DEBUG "%s: %s unregistered\n",
+				__func__, elem->name);
+			return;
+		}
+	printk(KERN_ERR "%s: element %s not in list.\n", __func__, elem->name);
+}
+EXPORT_SYMBOL(mISDN_dsp_element_unregister);
+
+int dsp_pipeline_module_init(void)
+{
+	elements_class = class_create(THIS_MODULE, "dsp_pipeline");
+	if (IS_ERR(elements_class))
+		return PTR_ERR(elements_class);
+
+#ifdef PIPELINE_DEBUG
+	printk(KERN_DEBUG "%s: dsp pipeline module initialized\n", __func__);
+#endif
+
+	dsp_hwec_init();
+
+	return 0;
+}
+
+void dsp_pipeline_module_exit(void)
+{
+	struct dsp_element_entry *entry, *n;
+
+	dsp_hwec_exit();
+
+	class_destroy(elements_class);
+
+	list_for_each_entry_safe(entry, n, &dsp_elements, list) {
+		list_del(&entry->list);
+		printk(KERN_WARNING "%s: element was still registered: %s\n",
+			__func__, entry->elem->name);
+		kfree(entry);
+	}
+
+	printk(KERN_DEBUG "%s: dsp pipeline module exited\n", __func__);
+}
+
+int dsp_pipeline_init(struct dsp_pipeline *pipeline)
+{
+	if (!pipeline)
+		return -EINVAL;
+
+	INIT_LIST_HEAD(&pipeline->list);
+
+#ifdef PIPELINE_DEBUG
+	printk(KERN_DEBUG "%s: dsp pipeline ready\n", __func__);
+#endif
+
+	return 0;
+}
+
+static inline void _dsp_pipeline_destroy(struct dsp_pipeline *pipeline)
+{
+	struct dsp_pipeline_entry *entry, *n;
+
+	list_for_each_entry_safe(entry, n, &pipeline->list, list) {
+		list_del(&entry->list);
+		if (entry->elem == dsp_hwec)
+			dsp_hwec_disable(container_of(pipeline, struct dsp,
+				pipeline));
+		else
+			entry->elem->free(entry->p);
+		kfree(entry);
+	}
+}
+
+void dsp_pipeline_destroy(struct dsp_pipeline *pipeline)
+{
+
+	if (!pipeline)
+		return;
+
+	_dsp_pipeline_destroy(pipeline);
+
+#ifdef PIPELINE_DEBUG
+	printk(KERN_DEBUG "%s: dsp pipeline destroyed\n", __func__);
+#endif
+}
+
+int dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg)
+{
+	int len, incomplete = 0, found = 0;
+	char *dup, *tok, *name, *args;
+	struct dsp_element_entry *entry, *n;
+	struct dsp_pipeline_entry *pipeline_entry;
+	struct mISDN_dsp_element *elem;
+
+	if (!pipeline)
+		return -EINVAL;
+
+	if (!list_empty(&pipeline->list))
+		_dsp_pipeline_destroy(pipeline);
+
+	if (!cfg)
+		return 0;
+
+	len = strlen(cfg);
+	if (!len)
+		return 0;
+
+	dup = kmalloc(len + 1, GFP_KERNEL);
+	if (!dup)
+		return 0;
+	strcpy(dup, cfg);
+	while ((tok = strsep(&dup, "|"))) {
+		if (!strlen(tok))
+			continue;
+		name = strsep(&tok, "(");
+		args = strsep(&tok, ")");
+		if (args && !*args)
+			args = 0;
+
+		list_for_each_entry_safe(entry, n, &dsp_elements, list)
+			if (!strcmp(entry->elem->name, name)) {
+				elem = entry->elem;
+
+				pipeline_entry = kmalloc(sizeof(struct
+					dsp_pipeline_entry), GFP_KERNEL);
+				if (!pipeline_entry) {
+					printk(KERN_DEBUG "%s: failed to add "
+					    "entry to pipeline: %s (out of "
+					    "memory)\n", __func__, elem->name);
+					incomplete = 1;
+					goto _out;
+				}
+				pipeline_entry->elem = elem;
+
+				if (elem == dsp_hwec) {
+					/* This is a hack to make the hwec
+					   available as a pipeline module */
+					dsp_hwec_enable(container_of(pipeline,
+						struct dsp, pipeline), args);
+					list_add_tail(&pipeline_entry->list,
+						&pipeline->list);
+				} else {
+					pipeline_entry->p = elem->new(args);
+					if (pipeline_entry->p) {
+						list_add_tail(&pipeline_entry->
+							list, &pipeline->list);
+#ifdef PIPELINE_DEBUG
+						printk(KERN_DEBUG "%s: created "
+						    "instance of %s%s%s\n",
+						    __func__, name, args ?
+						    " with args " : "", args ?
+						    args : "");
+#endif
+					} else {
+						printk(KERN_DEBUG "%s: failed "
+						  "to add entry to pipeline: "
+						  "%s (new() returned NULL)\n",
+						  __func__, elem->name);
+						kfree(pipeline_entry);
+						incomplete = 1;
+					}
+				}
+				found = 1;
+				break;
+			}
+
+		if (found)
+			found = 0;
+		else {
+			printk(KERN_DEBUG "%s: element not found, skipping: "
+				"%s\n", __func__, name);
+			incomplete = 1;
+		}
+	}
+
+_out:
+	if (!list_empty(&pipeline->list))
+		pipeline->inuse = 1;
+	else
+		pipeline->inuse = 0;
+
+#ifdef PIPELINE_DEBUG
+	printk(KERN_DEBUG "%s: dsp pipeline built%s: %s\n",
+		__func__, incomplete ? " incomplete" : "", cfg);
+#endif
+	kfree(dup);
+	return 0;
+}
+
+void dsp_pipeline_process_tx(struct dsp_pipeline *pipeline, u8 *data, int len)
+{
+	struct dsp_pipeline_entry *entry;
+
+	if (!pipeline)
+		return;
+
+	list_for_each_entry(entry, &pipeline->list, list)
+		if (entry->elem->process_tx)
+			entry->elem->process_tx(entry->p, data, len);
+}
+
+void dsp_pipeline_process_rx(struct dsp_pipeline *pipeline, u8 *data, int len)
+{
+	struct dsp_pipeline_entry *entry;
+
+	if (!pipeline)
+		return;
+
+	list_for_each_entry_reverse(entry, &pipeline->list, list)
+		if (entry->elem->process_rx)
+			entry->elem->process_rx(entry->p, data, len);
+}
+
+
diff --git a/drivers/isdn/mISDN/dsp_tones.c b/drivers/isdn/mISDN/dsp_tones.c
new file mode 100644
index 00000000000..23dd0dd2152
--- /dev/null
+++ b/drivers/isdn/mISDN/dsp_tones.c
@@ -0,0 +1,551 @@
+/*
+ * Audio support data for ISDN4Linux.
+ *
+ * Copyright Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/mISDNif.h>
+#include <linux/mISDNdsp.h>
+#include "core.h"
+#include "dsp.h"
+
+
+#define DATA_S sample_silence
+#define SIZE_S (&sizeof_silence)
+#define DATA_GA sample_german_all
+#define SIZE_GA (&sizeof_german_all)
+#define DATA_GO sample_german_old
+#define SIZE_GO (&sizeof_german_old)
+#define DATA_DT sample_american_dialtone
+#define SIZE_DT (&sizeof_american_dialtone)
+#define DATA_RI sample_american_ringing
+#define SIZE_RI (&sizeof_american_ringing)
+#define DATA_BU sample_american_busy
+#define SIZE_BU (&sizeof_american_busy)
+#define DATA_S1 sample_special1
+#define SIZE_S1 (&sizeof_special1)
+#define DATA_S2 sample_special2
+#define SIZE_S2 (&sizeof_special2)
+#define DATA_S3 sample_special3
+#define SIZE_S3 (&sizeof_special3)
+
+/***************/
+/* tones loops */
+/***************/
+
+/* all tones are alaw encoded */
+/* the last sample+1 is in phase with the first sample. the error is low */
+
+static u8 sample_german_all[] = {
+	0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
+	0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
+	0xdc, 0xfc, 0x6c,
+	0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
+	0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
+	0xdc, 0xfc, 0x6c,
+	0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
+	0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
+	0xdc, 0xfc, 0x6c,
+	0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d,
+	0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c,
+	0xdc, 0xfc, 0x6c,
+};
+static u32 sizeof_german_all = sizeof(sample_german_all);
+
+static u8 sample_german_old[] = {
+	0xec, 0x68, 0xe1, 0x6d, 0x6d, 0x91, 0x51, 0xed,
+	0x6d, 0x01, 0x1e, 0x10, 0x0c, 0x90, 0x60, 0x70,
+	0x8c,
+	0xec, 0x68, 0xe1, 0x6d, 0x6d, 0x91, 0x51, 0xed,
+	0x6d, 0x01, 0x1e, 0x10, 0x0c, 0x90, 0x60, 0x70,
+	0x8c,
+	0xec, 0x68, 0xe1, 0x6d, 0x6d, 0x91, 0x51, 0xed,
+	0x6d, 0x01, 0x1e, 0x10, 0x0c, 0x90, 0x60, 0x70,
+	0x8c,
+	0xec, 0x68, 0xe1, 0x6d, 0x6d, 0x91, 0x51, 0xed,
+	0x6d, 0x01, 0x1e, 0x10, 0x0c, 0x90, 0x60, 0x70,
+	0x8c,
+};
+static u32 sizeof_german_old = sizeof(sample_german_old);
+
+static u8 sample_american_dialtone[] = {
+	0x2a, 0x18, 0x90, 0x6c, 0x4c, 0xbc, 0x4c, 0x6c,
+	0x10, 0x58, 0x32, 0xb9, 0x31, 0x2d, 0x8d, 0x0d,
+	0x8d, 0x2d, 0x31, 0x99, 0x0f, 0x28, 0x60, 0xf0,
+	0xd0, 0x50, 0xd0, 0x30, 0x60, 0x08, 0x8e, 0x67,
+	0x09, 0x19, 0x21, 0xe1, 0xd9, 0xb9, 0x29, 0x67,
+	0x83, 0x02, 0xce, 0xbe, 0xee, 0x1a, 0x1b, 0xef,
+	0xbf, 0xcf, 0x03, 0x82, 0x66, 0x28, 0xb8, 0xd8,
+	0xe0, 0x20, 0x18, 0x08, 0x66, 0x8f, 0x09, 0x61,
+	0x31, 0xd1, 0x51, 0xd1, 0xf1, 0x61, 0x29, 0x0e,
+	0x98, 0x30, 0x2c, 0x8c, 0x0c, 0x8c, 0x2c, 0x30,
+	0xb8, 0x33, 0x59, 0x11, 0x6d, 0x4d, 0xbd, 0x4d,
+	0x6d, 0x91, 0x19,
+};
+static u32 sizeof_american_dialtone = sizeof(sample_american_dialtone);
+
+static u8 sample_american_ringing[] = {
+	0x2a, 0xe0, 0xac, 0x0c, 0xbc, 0x4c, 0x8c, 0x90,
+	0x48, 0xc7, 0xc1, 0xed, 0xcd, 0x4d, 0xcd, 0xed,
+	0xc1, 0xb7, 0x08, 0x30, 0xec, 0xcc, 0xcc, 0x8c,
+	0x10, 0x58, 0x1a, 0x99, 0x71, 0xed, 0x8d, 0x8d,
+	0x2d, 0x41, 0x89, 0x9e, 0x20, 0x70, 0x2c, 0xec,
+	0x2c, 0x70, 0x20, 0x86, 0x77, 0xe1, 0x31, 0x11,
+	0xd1, 0xf1, 0x81, 0x09, 0xa3, 0x56, 0x58, 0x00,
+	0x40, 0xc0, 0x60, 0x38, 0x46, 0x43, 0x57, 0x39,
+	0xd9, 0x59, 0x99, 0xc9, 0x77, 0x2f, 0x2e, 0xc6,
+	0xd6, 0x28, 0xd6, 0x36, 0x26, 0x2e, 0x8a, 0xa3,
+	0x43, 0x63, 0x4b, 0x4a, 0x62, 0x42, 0xa2, 0x8b,
+	0x2f, 0x27, 0x37, 0xd7, 0x29, 0xd7, 0xc7, 0x2f,
+	0x2e, 0x76, 0xc8, 0x98, 0x58, 0xd8, 0x38, 0x56,
+	0x42, 0x47, 0x39, 0x61, 0xc1, 0x41, 0x01, 0x59,
+	0x57, 0xa2, 0x08, 0x80, 0xf0, 0xd0, 0x10, 0x30,
+	0xe0, 0x76, 0x87, 0x21, 0x71, 0x2d, 0xed, 0x2d,
+	0x71, 0x21, 0x9f, 0x88, 0x40, 0x2c, 0x8c, 0x8c,
+	0xec, 0x70, 0x98, 0x1b, 0x59, 0x11, 0x8d, 0xcd,
+	0xcd, 0xed, 0x31, 0x09, 0xb6, 0xc0, 0xec, 0xcc,
+	0x4c, 0xcc, 0xec, 0xc0, 0xc6, 0x49, 0x91, 0x8d,
+	0x4d, 0xbd, 0x0d, 0xad, 0xe1,
+};
+static u32 sizeof_american_ringing = sizeof(sample_american_ringing);
+
+static u8 sample_american_busy[] = {
+	0x2a, 0x00, 0x6c, 0x4c, 0x4c, 0x6c, 0xb0, 0x66,
+	0x99, 0x11, 0x6d, 0x8d, 0x2d, 0x41, 0xd7, 0x96,
+	0x60, 0xf0, 0x70, 0x40, 0x58, 0xf6, 0x53, 0x57,
+	0x09, 0x89, 0xd7, 0x5f, 0xe3, 0x2a, 0xe3, 0x5f,
+	0xd7, 0x89, 0x09, 0x57, 0x53, 0xf6, 0x58, 0x40,
+	0x70, 0xf0, 0x60, 0x96, 0xd7, 0x41, 0x2d, 0x8d,
+	0x6d, 0x11, 0x99, 0x66, 0xb0, 0x6c, 0x4c, 0x4c,
+	0x6c, 0x00, 0x2a, 0x01, 0x6d, 0x4d, 0x4d, 0x6d,
+	0xb1, 0x67, 0x98, 0x10, 0x6c, 0x8c, 0x2c, 0x40,
+	0xd6, 0x97, 0x61, 0xf1, 0x71, 0x41, 0x59, 0xf7,
+	0x52, 0x56, 0x08, 0x88, 0xd6, 0x5e, 0xe2, 0x2a,
+	0xe2, 0x5e, 0xd6, 0x88, 0x08, 0x56, 0x52, 0xf7,
+	0x59, 0x41, 0x71, 0xf1, 0x61, 0x97, 0xd6, 0x40,
+	0x2c, 0x8c, 0x6c, 0x10, 0x98, 0x67, 0xb1, 0x6d,
+	0x4d, 0x4d, 0x6d, 0x01,
+};
+static u32 sizeof_american_busy = sizeof(sample_american_busy);
+
+static u8 sample_special1[] = {
+	0x2a, 0x2c, 0xbc, 0x6c, 0xd6, 0x71, 0xbd, 0x0d,
+	0xd9, 0x80, 0xcc, 0x4c, 0x40, 0x39, 0x0d, 0xbd,
+	0x11, 0x86, 0xec, 0xbc, 0xec, 0x0e, 0x51, 0xbd,
+	0x8d, 0x89, 0x30, 0x4c, 0xcc, 0xe0, 0xe1, 0xcd,
+	0x4d, 0x31, 0x88, 0x8c, 0xbc, 0x50, 0x0f, 0xed,
+	0xbd, 0xed, 0x87, 0x10, 0xbc, 0x0c, 0x38, 0x41,
+	0x4d, 0xcd, 0x81, 0xd8, 0x0c, 0xbc, 0x70, 0xd7,
+	0x6d, 0xbd, 0x2d,
+};
+static u32 sizeof_special1 = sizeof(sample_special1);
+
+static u8 sample_special2[] = {
+	0x2a, 0xcc, 0x8c, 0xd7, 0x4d, 0x2d, 0x18, 0xbc,
+	0x10, 0xc1, 0xbd, 0xc1, 0x10, 0xbc, 0x18, 0x2d,
+	0x4d, 0xd7, 0x8c, 0xcc, 0x2a, 0xcd, 0x8d, 0xd6,
+	0x4c, 0x2c, 0x19, 0xbd, 0x11, 0xc0, 0xbc, 0xc0,
+	0x11, 0xbd, 0x19, 0x2c, 0x4c, 0xd6, 0x8d, 0xcd,
+	0x2a, 0xcc, 0x8c, 0xd7, 0x4d, 0x2d, 0x18, 0xbc,
+	0x10, 0xc1, 0xbd, 0xc1, 0x10, 0xbc, 0x18, 0x2d,
+	0x4d, 0xd7, 0x8c, 0xcc, 0x2a, 0xcd, 0x8d, 0xd6,
+	0x4c, 0x2c, 0x19, 0xbd, 0x11, 0xc0, 0xbc, 0xc0,
+	0x11, 0xbd, 0x19, 0x2c, 0x4c, 0xd6, 0x8d, 0xcd,
+};
+static u32 sizeof_special2 = sizeof(sample_special2);
+
+static u8 sample_special3[] = {
+	0x2a, 0xbc, 0x18, 0xcd, 0x11, 0x2c, 0x8c, 0xc1,
+	0x4d, 0xd6, 0xbc, 0xd6, 0x4d, 0xc1, 0x8c, 0x2c,
+	0x11, 0xcd, 0x18, 0xbc, 0x2a, 0xbd, 0x19, 0xcc,
+	0x10, 0x2d, 0x8d, 0xc0, 0x4c, 0xd7, 0xbd, 0xd7,
+	0x4c, 0xc0, 0x8d, 0x2d, 0x10, 0xcc, 0x19, 0xbd,
+	0x2a, 0xbc, 0x18, 0xcd, 0x11, 0x2c, 0x8c, 0xc1,
+	0x4d, 0xd6, 0xbc, 0xd6, 0x4d, 0xc1, 0x8c, 0x2c,
+	0x11, 0xcd, 0x18, 0xbc, 0x2a, 0xbd, 0x19, 0xcc,
+	0x10, 0x2d, 0x8d, 0xc0, 0x4c, 0xd7, 0xbd, 0xd7,
+	0x4c, 0xc0, 0x8d, 0x2d, 0x10, 0xcc, 0x19, 0xbd,
+};
+static u32 sizeof_special3 = sizeof(sample_special3);
+
+static u8 sample_silence[] = {
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+	0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a,
+};
+static u32 sizeof_silence = sizeof(sample_silence);
+
+struct tones_samples {
+	u32 *len;
+	u8 *data;
+};
+static struct
+tones_samples samples[] = {
+	{&sizeof_german_all, sample_german_all},
+	{&sizeof_german_old, sample_german_old},
+	{&sizeof_american_dialtone, sample_american_dialtone},
+	{&sizeof_american_ringing, sample_american_ringing},
+	{&sizeof_american_busy, sample_american_busy},
+	{&sizeof_special1, sample_special1},
+	{&sizeof_special2, sample_special2},
+	{&sizeof_special3, sample_special3},
+	{NULL, NULL},
+};
+
+/***********************************
+ * generate ulaw from alaw samples *
+ ***********************************/
+
+void
+dsp_audio_generate_ulaw_samples(void)
+{
+	int i, j;
+
+	i = 0;
+	while (samples[i].len) {
+		j = 0;
+		while (j < (*samples[i].len)) {
+			samples[i].data[j] =
+				dsp_audio_alaw_to_ulaw[samples[i].data[j]];
+			j++;
+		}
+		i++;
+	}
+}
+
+
+/****************************
+ * tone sequence definition *
+ ****************************/
+
+struct pattern {
+	int tone;
+	u8 *data[10];
+	u32 *siz[10];
+	u32 seq[10];
+} pattern[] = {
+	{TONE_GERMAN_DIALTONE,
+	{DATA_GA, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{1900, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDDIALTONE,
+	{DATA_GO, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{1998, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_DIALTONE,
+	{DATA_DT, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_DT, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_DIALPBX,
+	{DATA_GA, DATA_S, DATA_GA, DATA_S, DATA_GA, DATA_S, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, 0, 0, 0, 0},
+	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDDIALPBX,
+	{DATA_GO, DATA_S, DATA_GO, DATA_S, DATA_GO, DATA_S, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, 0, 0, 0, 0},
+	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_DIALPBX,
+	{DATA_DT, DATA_S, DATA_DT, DATA_S, DATA_DT, DATA_S, 0, 0, 0, 0},
+	{SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, SIZE_DT, SIZE_S, 0, 0, 0, 0},
+	{2000, 2000, 2000, 2000, 2000, 12000, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_RINGING,
+	{DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 32000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDRINGING,
+	{DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 40000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_RINGING,
+	{DATA_RI, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_RI, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 32000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_RINGPBX,
+	{DATA_GA, DATA_S, DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 4000, 28000, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDRINGPBX,
+	{DATA_GO, DATA_S, DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 4000, 28000, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_RINGPBX,
+	{DATA_RI, DATA_S, DATA_RI, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_RI, SIZE_S, SIZE_RI, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 4000, 28000, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_BUSY,
+	{DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDBUSY,
+	{DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{1000, 5000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_BUSY,
+	{DATA_BU, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_BU, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_HANGUP,
+	{DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{4000, 4000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_OLDHANGUP,
+	{DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{1000, 5000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_AMERICAN_HANGUP,
+	{DATA_DT, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_DT, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{8000, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_SPECIAL_INFO,
+	{DATA_S1, DATA_S2, DATA_S3, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_S1, SIZE_S2, SIZE_S3, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{2666, 2666, 2666, 8002, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_GASSENBESETZT,
+	{DATA_GA, DATA_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{SIZE_GA, SIZE_S, 0, 0, 0, 0, 0, 0, 0, 0},
+	{2000, 2000, 0, 0, 0, 0, 0, 0, 0, 0} },
+
+	{TONE_GERMAN_AUFSCHALTTON,
+	{DATA_GO, DATA_S, DATA_GO, DATA_S, 0, 0, 0, 0, 0, 0},
+	{SIZE_GO, SIZE_S, SIZE_GO, SIZE_S, 0, 0, 0, 0, 0, 0},
+	{1000, 5000, 1000, 17000, 0, 0, 0, 0, 0, 0} },
+
+	{0,
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+};
+
+/******************
+ * copy tone data *
+ ******************/
+
+/* an sk_buff is generated from the number of samples needed.
+ * the count will be changed and may begin from 0 each pattern period.
+ * the clue is to precalculate the pointers and legths to use only one
+ * memcpy per function call, or two memcpy if the tone sequence changes.
+ *
+ * pattern - the type of the pattern
+ * count - the sample from the beginning of the pattern (phase)
+ * len - the number of bytes
+ *
+ * return - the sk_buff with the sample
+ *
+ * if tones has finished (e.g. knocking tone), dsp->tones is turned off
+ */
+void dsp_tone_copy(struct dsp *dsp, u8 *data, int len)
+{
+	int index, count, start, num;
+	struct pattern *pat;
+	struct dsp_tone *tone = &dsp->tone;
+
+	/* if we have no tone, we copy silence */
+	if (!tone->tone) {
+		memset(data, dsp_silence, len);
+		return;
+	}
+
+	/* process pattern */
+	pat = (struct pattern *)tone->pattern;
+		/* points to the current pattern */
+	index = tone->index; /* gives current sequence index */
+	count = tone->count; /* gives current sample */
+
+	/* copy sample */
+	while (len) {
+		/* find sample to start with */
+		while (42) {
+			/* warp arround */
+			if (!pat->seq[index]) {
+				count = 0;
+				index = 0;
+			}
+			/* check if we are currently playing this tone */
+			if (count < pat->seq[index])
+				break;
+			if (dsp_debug & DEBUG_DSP_TONE)
+				printk(KERN_DEBUG "%s: reaching next sequence "
+					"(index=%d)\n", __func__, index);
+			count -= pat->seq[index];
+			index++;
+		}
+		/* calculate start and number of samples */
+		start = count % (*(pat->siz[index]));
+		num = len;
+		if (num+count > pat->seq[index])
+			num = pat->seq[index] - count;
+		if (num+start > (*(pat->siz[index])))
+			num = (*(pat->siz[index])) - start;
+		/* copy memory */
+		memcpy(data, pat->data[index]+start, num);
+		/* reduce length */
+		data += num;
+		count += num;
+		len -= num;
+	}
+	tone->index = index;
+	tone->count = count;
+
+	/* return sk_buff */
+	return;
+}
+
+
+/*******************************
+ * send HW message to hfc card *
+ *******************************/
+
+static void
+dsp_tone_hw_message(struct dsp *dsp, u8 *sample, int len)
+{
+	struct sk_buff *nskb;
+
+	/* unlocking is not required, because we don't expect a response */
+	nskb = _alloc_mISDN_skb(PH_CONTROL_REQ,
+		(len)?HFC_SPL_LOOP_ON:HFC_SPL_LOOP_OFF, len, sample,
+		GFP_ATOMIC);
+	if (nskb) {
+		if (dsp->ch.peer) {
+			if (dsp->ch.recv(dsp->ch.peer, nskb))
+				dev_kfree_skb(nskb);
+		} else
+			dev_kfree_skb(nskb);
+	}
+}
+
+
+/*****************
+ * timer expires *
+ *****************/
+void
+dsp_tone_timeout(void *arg)
+{
+	struct dsp *dsp = arg;
+	struct dsp_tone *tone = &dsp->tone;
+	struct pattern *pat = (struct pattern *)tone->pattern;
+	int index = tone->index;
+
+	if (!tone->tone)
+		return;
+
+	index++;
+	if (!pat->seq[index])
+		index = 0;
+	tone->index = index;
+
+	/* set next tone */
+	if (pat->data[index] == DATA_S)
+		dsp_tone_hw_message(dsp, 0, 0);
+	else
+		dsp_tone_hw_message(dsp, pat->data[index], *(pat->siz[index]));
+	/* set timer */
+	init_timer(&tone->tl);
+	tone->tl.expires = jiffies + (pat->seq[index] * HZ) / 8000;
+	add_timer(&tone->tl);
+}
+
+
+/********************
+ * set/release tone *
+ ********************/
+
+/*
+ * tones are relaized by streaming or by special loop commands if supported
+ * by hardware. when hardware is used, the patterns will be controlled by
+ * timers.
+ */
+int
+dsp_tone(struct dsp *dsp, int tone)
+{
+	struct pattern *pat;
+	int i;
+	struct dsp_tone *tonet = &dsp->tone;
+
+	tonet->software = 0;
+	tonet->hardware = 0;
+
+	/* we turn off the tone */
+	if (!tone) {
+		if (dsp->features.hfc_loops)
+		if (timer_pending(&tonet->tl))
+			del_timer(&tonet->tl);
+		if (dsp->features.hfc_loops)
+			dsp_tone_hw_message(dsp, NULL, 0);
+		tonet->tone = 0;
+		return 0;
+	}
+
+	pat = NULL;
+	i = 0;
+	while (pattern[i].tone) {
+		if (pattern[i].tone == tone) {
+			pat = &pattern[i];
+			break;
+		}
+		i++;
+	}
+	if (!pat) {
+		printk(KERN_WARNING "dsp: given tone 0x%x is invalid\n", tone);
+		return -EINVAL;
+	}
+	if (dsp_debug & DEBUG_DSP_TONE)
+		printk(KERN_DEBUG "%s: now starting tone %d (index=%d)\n",
+			__func__, tone, 0);
+	tonet->tone = tone;
+	tonet->pattern = pat;
+	tonet->index = 0;
+	tonet->count = 0;
+
+	if (dsp->features.hfc_loops) {
+		tonet->hardware = 1;
+		/* set first tone */
+		dsp_tone_hw_message(dsp, pat->data[0], *(pat->siz[0]));
+		/* set timer */
+		if (timer_pending(&tonet->tl))
+			del_timer(&tonet->tl);
+		init_timer(&tonet->tl);
+		tonet->tl.expires = jiffies + (pat->seq[0] * HZ) / 8000;
+		add_timer(&tonet->tl);
+	} else {
+		tonet->software = 1;
+	}
+
+	return 0;
+}
+
+
+
+
+
diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h
new file mode 100644
index 00000000000..6b71d2dce50
--- /dev/null
+++ b/include/linux/mISDNdsp.h
@@ -0,0 +1,37 @@
+#ifndef __mISDNdsp_H__
+#define __mISDNdsp_H__
+
+struct mISDN_dsp_element_arg {
+	char	*name;
+	char	*def;
+	char	*desc;
+};
+
+struct mISDN_dsp_element {
+	char	*name;
+	void	*(*new)(const char *arg);
+	void	(*free)(void *p);
+	void	(*process_tx)(void *p, unsigned char *data, int len);
+	void	(*process_rx)(void *p, unsigned char *data, int len);
+	int	num_args;
+	struct mISDN_dsp_element_arg
+		*args;
+};
+
+extern int  mISDN_dsp_element_register(struct mISDN_dsp_element *elem);
+extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem);
+
+struct dsp_features {
+	int	hfc_id; /* unique id to identify the chip (or -1) */
+	int	hfc_dtmf; /* set if HFCmulti card supports dtmf */
+	int	hfc_loops; /* set if card supports tone loops */
+	int	hfc_echocanhw; /* set if card supports echocancelation*/
+	int	pcm_id; /* unique id to identify the pcm bus (or -1) */
+	int	pcm_slots; /* number of slots on the pcm bus */
+	int	pcm_banks; /* number of IO banks of pcm bus */
+	int	unclocked; /* data is not clocked (has jitter/loss) */
+	int	unordered; /* data is unordered (packets have index) */
+};
+
+#endif
+
-- 
cgit v1.2.3


From 1700fe1a10dc0eaac0ef60a8093eaeafa9bff9ae Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sat, 26 Jul 2008 18:55:28 +0200
Subject: Add mISDN HFC PCI driver

Enable support for card with Cologne Chip AG's
HFC PCIbased cards

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/hardware/mISDN/Kconfig   |   13 +
 drivers/isdn/hardware/mISDN/Makefile  |    6 +
 drivers/isdn/hardware/mISDN/hfc_pci.h |  228 ++++
 drivers/isdn/hardware/mISDN/hfcpci.c  | 2256 +++++++++++++++++++++++++++++++++
 4 files changed, 2503 insertions(+)
 create mode 100644 drivers/isdn/hardware/mISDN/Kconfig
 create mode 100644 drivers/isdn/hardware/mISDN/Makefile
 create mode 100644 drivers/isdn/hardware/mISDN/hfc_pci.h
 create mode 100644 drivers/isdn/hardware/mISDN/hfcpci.c

diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
new file mode 100644
index 00000000000..f62dc8752be
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -0,0 +1,13 @@
+#
+# Hardware for mISDN
+#
+comment "mISDN hardware drivers"
+
+config MISDN_HFCPCI
+	tristate "Support for HFC PCI cards"
+	depends on MISDN
+	depends on PCI
+	help
+	  Enable support for cards with Cologne Chip AG's
+          HFC PCI chip.
+
diff --git a/drivers/isdn/hardware/mISDN/Makefile b/drivers/isdn/hardware/mISDN/Makefile
new file mode 100644
index 00000000000..6f20a40b9d5
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the modular ISDN hardware drivers
+#
+#
+
+obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
diff --git a/drivers/isdn/hardware/mISDN/hfc_pci.h b/drivers/isdn/hardware/mISDN/hfc_pci.h
new file mode 100644
index 00000000000..fd2c9be6d84
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfc_pci.h
@@ -0,0 +1,228 @@
+/*
+ *  specific defines for CCD's HFC 2BDS0 PCI chips
+ *
+ * Author     Werner Cornelius (werner@isdn4linux.de)
+ *
+ * Copyright 1999  by Werner Cornelius (werner@isdn4linux.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * thresholds for transparent B-channel mode
+ * change mask and threshold simultaneously
+ */
+#define HFCPCI_BTRANS_THRESHOLD 128
+#define HFCPCI_BTRANS_MAX	256
+#define HFCPCI_BTRANS_THRESMASK 0x00
+
+/* defines for PCI config */
+#define PCI_ENA_MEMIO		0x02
+#define PCI_ENA_MASTER		0x04
+
+/* GCI/IOM bus monitor registers */
+#define HCFPCI_C_I		0x08
+#define HFCPCI_TRxR		0x0C
+#define HFCPCI_MON1_D		0x28
+#define HFCPCI_MON2_D		0x2C
+
+/* GCI/IOM bus timeslot registers */
+#define HFCPCI_B1_SSL		0x80
+#define HFCPCI_B2_SSL		0x84
+#define HFCPCI_AUX1_SSL		0x88
+#define HFCPCI_AUX2_SSL		0x8C
+#define HFCPCI_B1_RSL		0x90
+#define HFCPCI_B2_RSL		0x94
+#define HFCPCI_AUX1_RSL		0x98
+#define HFCPCI_AUX2_RSL		0x9C
+
+/* GCI/IOM bus data registers */
+#define HFCPCI_B1_D		0xA0
+#define HFCPCI_B2_D		0xA4
+#define HFCPCI_AUX1_D		0xA8
+#define HFCPCI_AUX2_D		0xAC
+
+/* GCI/IOM bus configuration registers */
+#define HFCPCI_MST_EMOD		0xB4
+#define HFCPCI_MST_MODE		0xB8
+#define HFCPCI_CONNECT 		0xBC
+
+
+/* Interrupt and status registers */
+#define HFCPCI_FIFO_EN		0x44
+#define HFCPCI_TRM		0x48
+#define HFCPCI_B_MODE		0x4C
+#define HFCPCI_CHIP_ID		0x58
+#define HFCPCI_CIRM		0x60
+#define HFCPCI_CTMT		0x64
+#define HFCPCI_INT_M1		0x68
+#define HFCPCI_INT_M2		0x6C
+#define HFCPCI_INT_S1		0x78
+#define HFCPCI_INT_S2		0x7C
+#define HFCPCI_STATUS		0x70
+
+/* S/T section registers */
+#define HFCPCI_STATES		0xC0
+#define HFCPCI_SCTRL		0xC4
+#define HFCPCI_SCTRL_E		0xC8
+#define HFCPCI_SCTRL_R		0xCC
+#define HFCPCI_SQ		0xD0
+#define HFCPCI_CLKDEL		0xDC
+#define HFCPCI_B1_REC		0xF0
+#define HFCPCI_B1_SEND		0xF0
+#define HFCPCI_B2_REC		0xF4
+#define HFCPCI_B2_SEND		0xF4
+#define HFCPCI_D_REC		0xF8
+#define HFCPCI_D_SEND		0xF8
+#define HFCPCI_E_REC		0xFC
+
+
+/* bits in status register (READ) */
+#define HFCPCI_PCI_PROC		0x02
+#define HFCPCI_NBUSY		0x04
+#define HFCPCI_TIMER_ELAP	0x10
+#define HFCPCI_STATINT		0x20
+#define HFCPCI_FRAMEINT		0x40
+#define HFCPCI_ANYINT		0x80
+
+/* bits in CTMT (Write) */
+#define HFCPCI_CLTIMER		0x80
+#define HFCPCI_TIM3_125		0x04
+#define HFCPCI_TIM25		0x10
+#define HFCPCI_TIM50		0x14
+#define HFCPCI_TIM400		0x18
+#define HFCPCI_TIM800		0x1C
+#define HFCPCI_AUTO_TIMER	0x20
+#define HFCPCI_TRANSB2		0x02
+#define HFCPCI_TRANSB1		0x01
+
+/* bits in CIRM (Write) */
+#define HFCPCI_AUX_MSK		0x07
+#define HFCPCI_RESET		0x08
+#define HFCPCI_B1_REV		0x40
+#define HFCPCI_B2_REV		0x80
+
+/* bits in INT_M1 and INT_S1 */
+#define HFCPCI_INTS_B1TRANS	0x01
+#define HFCPCI_INTS_B2TRANS	0x02
+#define HFCPCI_INTS_DTRANS	0x04
+#define HFCPCI_INTS_B1REC	0x08
+#define HFCPCI_INTS_B2REC	0x10
+#define HFCPCI_INTS_DREC	0x20
+#define HFCPCI_INTS_L1STATE	0x40
+#define HFCPCI_INTS_TIMER	0x80
+
+/* bits in INT_M2 */
+#define HFCPCI_PROC_TRANS	0x01
+#define HFCPCI_GCI_I_CHG	0x02
+#define HFCPCI_GCI_MON_REC	0x04
+#define HFCPCI_IRQ_ENABLE	0x08
+#define HFCPCI_PMESEL		0x80
+
+/* bits in STATES */
+#define HFCPCI_STATE_MSK	0x0F
+#define HFCPCI_LOAD_STATE	0x10
+#define HFCPCI_ACTIVATE		0x20
+#define HFCPCI_DO_ACTION	0x40
+#define HFCPCI_NT_G2_G3		0x80
+
+/* bits in HFCD_MST_MODE */
+#define HFCPCI_MASTER		0x01
+#define HFCPCI_SLAVE		0x00
+#define HFCPCI_F0IO_POSITIV	0x02
+#define HFCPCI_F0_NEGATIV	0x04
+#define HFCPCI_F0_2C4		0x08
+/* remaining bits are for codecs control */
+
+/* bits in HFCD_SCTRL */
+#define SCTRL_B1_ENA		0x01
+#define SCTRL_B2_ENA		0x02
+#define SCTRL_MODE_TE		0x00
+#define SCTRL_MODE_NT		0x04
+#define SCTRL_LOW_PRIO		0x08
+#define SCTRL_SQ_ENA		0x10
+#define SCTRL_TEST		0x20
+#define SCTRL_NONE_CAP		0x40
+#define SCTRL_PWR_DOWN		0x80
+
+/* bits in SCTRL_E  */
+#define HFCPCI_AUTO_AWAKE	0x01
+#define HFCPCI_DBIT_1		0x04
+#define HFCPCI_IGNORE_COL	0x08
+#define HFCPCI_CHG_B1_B2	0x80
+
+/* bits in FIFO_EN register */
+#define HFCPCI_FIFOEN_B1	0x03
+#define HFCPCI_FIFOEN_B2	0x0C
+#define HFCPCI_FIFOEN_DTX	0x10
+#define HFCPCI_FIFOEN_B1TX	0x01
+#define HFCPCI_FIFOEN_B1RX	0x02
+#define HFCPCI_FIFOEN_B2TX	0x04
+#define HFCPCI_FIFOEN_B2RX	0x08
+
+
+/* definitions of fifo memory area */
+#define MAX_D_FRAMES 15
+#define MAX_B_FRAMES 31
+#define B_SUB_VAL    0x200
+#define B_FIFO_SIZE  (0x2000 - B_SUB_VAL)
+#define D_FIFO_SIZE  512
+#define D_FREG_MASK  0xF
+
+struct zt {
+	unsigned short z1;  /* Z1 pointer 16 Bit */
+	unsigned short z2;  /* Z2 pointer 16 Bit */
+};
+
+struct dfifo {
+	u_char data[D_FIFO_SIZE]; /* FIFO data space */
+	u_char fill1[0x20A0-D_FIFO_SIZE]; /* reserved, do not use */
+	u_char f1, f2; /* f pointers */
+	u_char fill2[0x20C0-0x20A2]; /* reserved, do not use */
+	/* mask index with D_FREG_MASK for access */
+	struct zt za[MAX_D_FRAMES+1];
+	u_char fill3[0x4000-0x2100]; /* align 16K */
+};
+
+struct bzfifo {
+	struct zt	za[MAX_B_FRAMES+1]; /* only range 0x0..0x1F allowed */
+	u_char		f1, f2; /* f pointers */
+	u_char		fill[0x2100-0x2082]; /* alignment */
+};
+
+
+union fifo_area {
+	struct {
+		struct dfifo d_tx; /* D-send channel */
+		struct dfifo d_rx; /* D-receive channel */
+	} d_chan;
+	struct {
+		u_char		fill1[0x200];
+		u_char		txdat_b1[B_FIFO_SIZE];
+		struct bzfifo	txbz_b1;
+		struct bzfifo	txbz_b2;
+		u_char		txdat_b2[B_FIFO_SIZE];
+		u_char		fill2[D_FIFO_SIZE];
+		u_char		rxdat_b1[B_FIFO_SIZE];
+		struct bzfifo	rxbz_b1;
+		struct bzfifo	rxbz_b2;
+		u_char rxdat_b2[B_FIFO_SIZE];
+	} b_chans;
+	u_char fill[32768];
+};
+
+#define Write_hfc(a, b, c) (writeb(c, (a->hw.pci_io)+b))
+#define Read_hfc(a, b) (readb((a->hw.pci_io)+b))
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
new file mode 100644
index 00000000000..917968530e1
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -0,0 +1,2256 @@
+/*
+ *
+ * hfcpci.c     low level driver for CCD's hfc-pci based cards
+ *
+ * Author     Werner Cornelius (werner@isdn4linux.de)
+ *            based on existing driver for CCD hfc ISA cards
+ *            type approval valid for HFC-S PCI A based card
+ *
+ * Copyright 1999  by Werner Cornelius (werner@isdn-development.de)
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+
+#include "hfc_pci.h"
+
+static const char *hfcpci_revision = "2.0";
+
+#define MAX_CARDS	8
+static int HFC_cnt;
+static uint debug;
+
+MODULE_AUTHOR("Karsten Keil");
+MODULE_LICENSE("GPL");
+module_param(debug, uint, 0);
+
+static LIST_HEAD(HFClist);
+DEFINE_RWLOCK(HFClock);
+
+enum {
+	HFC_CCD_2BD0,
+	HFC_CCD_B000,
+	HFC_CCD_B006,
+	HFC_CCD_B007,
+	HFC_CCD_B008,
+	HFC_CCD_B009,
+	HFC_CCD_B00A,
+	HFC_CCD_B00B,
+	HFC_CCD_B00C,
+	HFC_CCD_B100,
+	HFC_CCD_B700,
+	HFC_CCD_B701,
+	HFC_ASUS_0675,
+	HFC_BERKOM_A1T,
+	HFC_BERKOM_TCONCEPT,
+	HFC_ANIGMA_MC145575,
+	HFC_ZOLTRIX_2BD0,
+	HFC_DIGI_DF_M_IOM2_E,
+	HFC_DIGI_DF_M_E,
+	HFC_DIGI_DF_M_IOM2_A,
+	HFC_DIGI_DF_M_A,
+	HFC_ABOCOM_2BD1,
+	HFC_SITECOM_DC105V2,
+};
+
+struct hfcPCI_hw {
+	unsigned char		cirm;
+	unsigned char		ctmt;
+	unsigned char		clkdel;
+	unsigned char		states;
+	unsigned char		conn;
+	unsigned char		mst_m;
+	unsigned char		int_m1;
+	unsigned char		int_m2;
+	unsigned char		sctrl;
+	unsigned char		sctrl_r;
+	unsigned char		sctrl_e;
+	unsigned char		trm;
+	unsigned char		fifo_en;
+	unsigned char		bswapped;
+	unsigned char		protocol;
+	int			nt_timer;
+	unsigned char		*pci_io; /* start of PCI IO memory */
+	dma_addr_t		dmahandle;
+	void			*fifos; /* FIFO memory */
+	int			last_bfifo_cnt[2];
+	    /* marker saving last b-fifo frame count */
+	struct timer_list	timer;
+};
+
+#define	HFC_CFG_MASTER		1
+#define HFC_CFG_SLAVE		2
+#define	HFC_CFG_PCM		3
+#define HFC_CFG_2HFC		4
+#define HFC_CFG_SLAVEHFC	5
+#define HFC_CFG_NEG_F0		6
+#define HFC_CFG_SW_DD_DU	7
+
+#define FLG_HFC_TIMER_T1	16
+#define FLG_HFC_TIMER_T3	17
+
+#define NT_T1_COUNT	1120	/* number of 3.125ms interrupts (3.5s) */
+#define NT_T3_COUNT	31	/* number of 3.125ms interrupts (97 ms) */
+#define CLKDEL_TE	0x0e	/* CLKDEL in TE mode */
+#define CLKDEL_NT	0x6c	/* CLKDEL in NT mode */
+
+
+struct hfc_pci {
+	struct list_head	list;
+	u_char			subtype;
+	u_char			chanlimit;
+	u_char			initdone;
+	u_long			cfg;
+	u_int			irq;
+	u_int			irqcnt;
+	struct pci_dev		*pdev;
+	struct hfcPCI_hw	hw;
+	spinlock_t		lock;	/* card lock */
+	struct dchannel		dch;
+	struct bchannel		bch[2];
+};
+
+/* Interface functions */
+static void
+enable_hwirq(struct hfc_pci *hc)
+{
+	hc->hw.int_m2 |= HFCPCI_IRQ_ENABLE;
+	Write_hfc(hc, HFCPCI_INT_M2, hc->hw.int_m2);
+}
+
+static void
+disable_hwirq(struct hfc_pci *hc)
+{
+	hc->hw.int_m2 &= ~((u_char)HFCPCI_IRQ_ENABLE);
+	Write_hfc(hc, HFCPCI_INT_M2, hc->hw.int_m2);
+}
+
+/*
+ * free hardware resources used by driver
+ */
+static void
+release_io_hfcpci(struct hfc_pci *hc)
+{
+	/* disable memory mapped ports + busmaster */
+	pci_write_config_word(hc->pdev, PCI_COMMAND, 0);
+	del_timer(&hc->hw.timer);
+	pci_free_consistent(hc->pdev, 0x8000, hc->hw.fifos, hc->hw.dmahandle);
+	iounmap((void *)hc->hw.pci_io);
+}
+
+/*
+ * set mode (NT or TE)
+ */
+static void
+hfcpci_setmode(struct hfc_pci *hc)
+{
+	if (hc->hw.protocol == ISDN_P_NT_S0) {
+		hc->hw.clkdel = CLKDEL_NT;	/* ST-Bit delay for NT-Mode */
+		hc->hw.sctrl |= SCTRL_MODE_NT;	/* NT-MODE */
+		hc->hw.states = 1;		/* G1 */
+	} else {
+		hc->hw.clkdel = CLKDEL_TE;	/* ST-Bit delay for TE-Mode */
+		hc->hw.sctrl &= ~SCTRL_MODE_NT;	/* TE-MODE */
+		hc->hw.states = 2;		/* F2 */
+	}
+	Write_hfc(hc, HFCPCI_CLKDEL, hc->hw.clkdel);
+	Write_hfc(hc, HFCPCI_STATES, HFCPCI_LOAD_STATE | hc->hw.states);
+	udelay(10);
+	Write_hfc(hc, HFCPCI_STATES, hc->hw.states | 0x40); /* Deactivate */
+	Write_hfc(hc, HFCPCI_SCTRL, hc->hw.sctrl);
+}
+
+/*
+ * function called to reset the HFC PCI chip. A complete software reset of chip
+ * and fifos is done.
+ */
+static void
+reset_hfcpci(struct hfc_pci *hc)
+{
+	u_char	val;
+	int	cnt = 0;
+
+	printk(KERN_DEBUG "reset_hfcpci: entered\n");
+	val = Read_hfc(hc, HFCPCI_CHIP_ID);
+	printk(KERN_INFO "HFC_PCI: resetting HFC ChipId(%x)\n", val);
+	/* enable memory mapped ports, disable busmaster */
+	pci_write_config_word(hc->pdev, PCI_COMMAND, PCI_ENA_MEMIO);
+	disable_hwirq(hc);
+	/* enable memory ports + busmaster */
+	pci_write_config_word(hc->pdev, PCI_COMMAND,
+	    PCI_ENA_MEMIO + PCI_ENA_MASTER);
+	val = Read_hfc(hc, HFCPCI_STATUS);
+	printk(KERN_DEBUG "HFC-PCI status(%x) before reset\n", val);
+	hc->hw.cirm = HFCPCI_RESET;	/* Reset On */
+	Write_hfc(hc, HFCPCI_CIRM, hc->hw.cirm);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	mdelay(10);			/* Timeout 10ms */
+	hc->hw.cirm = 0;		/* Reset Off */
+	Write_hfc(hc, HFCPCI_CIRM, hc->hw.cirm);
+	val = Read_hfc(hc, HFCPCI_STATUS);
+	printk(KERN_DEBUG "HFC-PCI status(%x) after reset\n", val);
+	while (cnt < 50000) { /* max 50000 us */
+		udelay(5);
+		cnt += 5;
+		val = Read_hfc(hc, HFCPCI_STATUS);
+		if (!(val & 2))
+			break;
+	}
+	printk(KERN_DEBUG "HFC-PCI status(%x) after %dus\n", val, cnt);
+
+	hc->hw.fifo_en = 0x30;	/* only D fifos enabled */
+
+	hc->hw.bswapped = 0;	/* no exchange */
+	hc->hw.ctmt = HFCPCI_TIM3_125 | HFCPCI_AUTO_TIMER;
+	hc->hw.trm = HFCPCI_BTRANS_THRESMASK; /* no echo connect , threshold */
+	hc->hw.sctrl = 0x40;	/* set tx_lo mode, error in datasheet ! */
+	hc->hw.sctrl_r = 0;
+	hc->hw.sctrl_e = HFCPCI_AUTO_AWAKE;	/* S/T Auto awake */
+	hc->hw.mst_m = 0;
+	if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+		hc->hw.mst_m |= HFCPCI_MASTER;	/* HFC Master Mode */
+	if (test_bit(HFC_CFG_NEG_F0, &hc->cfg))
+		hc->hw.mst_m |= HFCPCI_F0_NEGATIV;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	Write_hfc(hc, HFCPCI_TRM, hc->hw.trm);
+	Write_hfc(hc, HFCPCI_SCTRL_E, hc->hw.sctrl_e);
+	Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt);
+
+	hc->hw.int_m1 = HFCPCI_INTS_DTRANS | HFCPCI_INTS_DREC |
+	    HFCPCI_INTS_L1STATE | HFCPCI_INTS_TIMER;
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+
+	/* Clear already pending ints */
+	if (Read_hfc(hc, HFCPCI_INT_S1));
+
+	/* set NT/TE mode */
+	hfcpci_setmode(hc);
+
+	Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+	Write_hfc(hc, HFCPCI_SCTRL_R, hc->hw.sctrl_r);
+
+	/*
+	 * Init GCI/IOM2 in master mode
+	 * Slots 0 and 1 are set for B-chan 1 and 2
+	 * D- and monitor/CI channel are not enabled
+	 * STIO1 is used as output for data, B1+B2 from ST->IOM+HFC
+	 * STIO2 is used as data input, B1+B2 from IOM->ST
+	 * ST B-channel send disabled -> continous 1s
+	 * The IOM slots are always enabled
+	 */
+	if (test_bit(HFC_CFG_PCM, &hc->cfg)) {
+		/* set data flow directions: connect B1,B2: HFC to/from PCM */
+		hc->hw.conn = 0x09;
+	} else {
+		hc->hw.conn = 0x36;	/* set data flow directions */
+		if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg)) {
+			Write_hfc(hc, HFCPCI_B1_SSL, 0xC0);
+			Write_hfc(hc, HFCPCI_B2_SSL, 0xC1);
+			Write_hfc(hc, HFCPCI_B1_RSL, 0xC0);
+			Write_hfc(hc, HFCPCI_B2_RSL, 0xC1);
+		} else {
+			Write_hfc(hc, HFCPCI_B1_SSL, 0x80);
+			Write_hfc(hc, HFCPCI_B2_SSL, 0x81);
+			Write_hfc(hc, HFCPCI_B1_RSL, 0x80);
+			Write_hfc(hc, HFCPCI_B2_RSL, 0x81);
+		}
+	}
+	Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+	val = Read_hfc(hc, HFCPCI_INT_S2);
+}
+
+/*
+ * Timer function called when kernel timer expires
+ */
+static void
+hfcpci_Timer(struct hfc_pci *hc)
+{
+	hc->hw.timer.expires = jiffies + 75;
+	/* WD RESET */
+/*
+ *	WriteReg(hc, HFCD_DATA, HFCD_CTMT, hc->hw.ctmt | 0x80);
+ *	add_timer(&hc->hw.timer);
+ */
+}
+
+
+/*
+ * select a b-channel entry matching and active
+ */
+static struct bchannel *
+Sel_BCS(struct hfc_pci *hc, int channel)
+{
+	if (test_bit(FLG_ACTIVE, &hc->bch[0].Flags) &&
+		(hc->bch[0].nr & channel))
+		return &hc->bch[0];
+	else if (test_bit(FLG_ACTIVE, &hc->bch[1].Flags) &&
+		(hc->bch[1].nr & channel))
+		return &hc->bch[1];
+	else
+		return NULL;
+}
+
+/*
+ * clear the desired B-channel rx fifo
+ */
+static void
+hfcpci_clear_fifo_rx(struct hfc_pci *hc, int fifo)
+{
+	u_char		fifo_state;
+	struct bzfifo	*bzr;
+
+	if (fifo) {
+		bzr = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b2;
+		fifo_state = hc->hw.fifo_en & HFCPCI_FIFOEN_B2RX;
+	} else {
+		bzr = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b1;
+		fifo_state = hc->hw.fifo_en & HFCPCI_FIFOEN_B1RX;
+	}
+	if (fifo_state)
+		hc->hw.fifo_en ^= fifo_state;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	hc->hw.last_bfifo_cnt[fifo] = 0;
+	bzr->f1 = MAX_B_FRAMES;
+	bzr->f2 = bzr->f1;	/* init F pointers to remain constant */
+	bzr->za[MAX_B_FRAMES].z1 = cpu_to_le16(B_FIFO_SIZE + B_SUB_VAL - 1);
+	bzr->za[MAX_B_FRAMES].z2 = cpu_to_le16(
+	    le16_to_cpu(bzr->za[MAX_B_FRAMES].z1));
+	if (fifo_state)
+		hc->hw.fifo_en |= fifo_state;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+}
+
+/*
+ * clear the desired B-channel tx fifo
+ */
+static void hfcpci_clear_fifo_tx(struct hfc_pci *hc, int fifo)
+{
+	u_char		fifo_state;
+	struct bzfifo	*bzt;
+
+	if (fifo) {
+		bzt = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b2;
+		fifo_state = hc->hw.fifo_en & HFCPCI_FIFOEN_B2TX;
+	} else {
+		bzt = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b1;
+		fifo_state = hc->hw.fifo_en & HFCPCI_FIFOEN_B1TX;
+	}
+	if (fifo_state)
+		hc->hw.fifo_en ^= fifo_state;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	if (hc->bch[fifo].debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG "hfcpci_clear_fifo_tx%d f1(%x) f2(%x) "
+		    "z1(%x) z2(%x) state(%x)\n",
+		    fifo, bzt->f1, bzt->f2,
+		    le16_to_cpu(bzt->za[MAX_B_FRAMES].z1),
+		    le16_to_cpu(bzt->za[MAX_B_FRAMES].z2),
+		    fifo_state);
+	bzt->f2 = MAX_B_FRAMES;
+	bzt->f1 = bzt->f2;	/* init F pointers to remain constant */
+	bzt->za[MAX_B_FRAMES].z1 = cpu_to_le16(B_FIFO_SIZE + B_SUB_VAL - 1);
+	bzt->za[MAX_B_FRAMES].z2 = cpu_to_le16(
+	    le16_to_cpu(bzt->za[MAX_B_FRAMES].z1 - 1));
+	if (fifo_state)
+		hc->hw.fifo_en |= fifo_state;
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	if (hc->bch[fifo].debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG
+		    "hfcpci_clear_fifo_tx%d f1(%x) f2(%x) z1(%x) z2(%x)\n",
+		    fifo, bzt->f1, bzt->f2,
+		    le16_to_cpu(bzt->za[MAX_B_FRAMES].z1),
+		    le16_to_cpu(bzt->za[MAX_B_FRAMES].z2));
+}
+
+/*
+ * read a complete B-frame out of the buffer
+ */
+static void
+hfcpci_empty_bfifo(struct bchannel *bch, struct bzfifo *bz,
+    u_char *bdata, int count)
+{
+	u_char		*ptr, *ptr1, new_f2;
+	int		total, maxlen, new_z2;
+	struct zt	*zp;
+
+	if ((bch->debug & DEBUG_HW_BCHANNEL) && !(bch->debug & DEBUG_HW_BFIFO))
+		printk(KERN_DEBUG "hfcpci_empty_fifo\n");
+	zp = &bz->za[bz->f2];	/* point to Z-Regs */
+	new_z2 = le16_to_cpu(zp->z2) + count;	/* new position in fifo */
+	if (new_z2 >= (B_FIFO_SIZE + B_SUB_VAL))
+		new_z2 -= B_FIFO_SIZE;	/* buffer wrap */
+	new_f2 = (bz->f2 + 1) & MAX_B_FRAMES;
+	if ((count > MAX_DATA_SIZE + 3) || (count < 4) ||
+	    (*(bdata + (le16_to_cpu(zp->z1) - B_SUB_VAL)))) {
+		if (bch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "hfcpci_empty_fifo: incoming packet "
+			    "invalid length %d or crc\n", count);
+#ifdef ERROR_STATISTIC
+		bch->err_inv++;
+#endif
+		bz->za[new_f2].z2 = cpu_to_le16(new_z2);
+		bz->f2 = new_f2;	/* next buffer */
+	} else {
+		bch->rx_skb = mI_alloc_skb(count - 3, GFP_ATOMIC);
+		if (!bch->rx_skb) {
+			printk(KERN_WARNING "HFCPCI: receive out of memory\n");
+			return;
+		}
+		total = count;
+		count -= 3;
+		ptr = skb_put(bch->rx_skb, count);
+
+		if (le16_to_cpu(zp->z2) + count <= B_FIFO_SIZE + B_SUB_VAL)
+			maxlen = count;		/* complete transfer */
+		else
+			maxlen = B_FIFO_SIZE + B_SUB_VAL -
+			    le16_to_cpu(zp->z2);	/* maximum */
+
+		ptr1 = bdata + (le16_to_cpu(zp->z2) - B_SUB_VAL);
+		    /* start of data */
+		memcpy(ptr, ptr1, maxlen);	/* copy data */
+		count -= maxlen;
+
+		if (count) {	/* rest remaining */
+			ptr += maxlen;
+			ptr1 = bdata;	/* start of buffer */
+			memcpy(ptr, ptr1, count);	/* rest */
+		}
+		bz->za[new_f2].z2 = cpu_to_le16(new_z2);
+		bz->f2 = new_f2;	/* next buffer */
+		recv_Bchannel(bch);
+	}
+}
+
+/*
+ * D-channel receive procedure
+ */
+static int
+receive_dmsg(struct hfc_pci *hc)
+{
+	struct dchannel	*dch = &hc->dch;
+	int		maxlen;
+	int		rcnt, total;
+	int		count = 5;
+	u_char		*ptr, *ptr1;
+	struct dfifo	*df;
+	struct zt	*zp;
+
+	df = &((union fifo_area *)(hc->hw.fifos))->d_chan.d_rx;
+	while (((df->f1 & D_FREG_MASK) != (df->f2 & D_FREG_MASK)) && count--) {
+		zp = &df->za[df->f2 & D_FREG_MASK];
+		rcnt = le16_to_cpu(zp->z1) - le16_to_cpu(zp->z2);
+		if (rcnt < 0)
+			rcnt += D_FIFO_SIZE;
+		rcnt++;
+		if (dch->debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG
+			    "hfcpci recd f1(%d) f2(%d) z1(%x) z2(%x) cnt(%d)\n",
+				df->f1, df->f2,
+				le16_to_cpu(zp->z1),
+				le16_to_cpu(zp->z2),
+				rcnt);
+
+		if ((rcnt > MAX_DFRAME_LEN + 3) || (rcnt < 4) ||
+		    (df->data[le16_to_cpu(zp->z1)])) {
+			if (dch->debug & DEBUG_HW)
+				printk(KERN_DEBUG
+				    "empty_fifo hfcpci paket inv. len "
+				    "%d or crc %d\n",
+				    rcnt,
+				    df->data[le16_to_cpu(zp->z1)]);
+#ifdef ERROR_STATISTIC
+			cs->err_rx++;
+#endif
+			df->f2 = ((df->f2 + 1) & MAX_D_FRAMES) |
+			    (MAX_D_FRAMES + 1);	/* next buffer */
+			df->za[df->f2 & D_FREG_MASK].z2 =
+			    cpu_to_le16((zp->z2 + rcnt) & (D_FIFO_SIZE - 1));
+		} else {
+			dch->rx_skb = mI_alloc_skb(rcnt - 3, GFP_ATOMIC);
+			if (!dch->rx_skb) {
+				printk(KERN_WARNING
+				    "HFC-PCI: D receive out of memory\n");
+				break;
+			}
+			total = rcnt;
+			rcnt -= 3;
+			ptr = skb_put(dch->rx_skb, rcnt);
+
+			if (le16_to_cpu(zp->z2) + rcnt <= D_FIFO_SIZE)
+				maxlen = rcnt;	/* complete transfer */
+			else
+				maxlen = D_FIFO_SIZE - le16_to_cpu(zp->z2);
+				    /* maximum */
+
+			ptr1 = df->data + le16_to_cpu(zp->z2);
+			    /* start of data */
+			memcpy(ptr, ptr1, maxlen);	/* copy data */
+			rcnt -= maxlen;
+
+			if (rcnt) {	/* rest remaining */
+				ptr += maxlen;
+				ptr1 = df->data;	/* start of buffer */
+				memcpy(ptr, ptr1, rcnt);	/* rest */
+			}
+			df->f2 = ((df->f2 + 1) & MAX_D_FRAMES) |
+			    (MAX_D_FRAMES + 1);	/* next buffer */
+			df->za[df->f2 & D_FREG_MASK].z2 = cpu_to_le16((
+			    le16_to_cpu(zp->z2) + total) & (D_FIFO_SIZE - 1));
+			recv_Dchannel(dch);
+		}
+	}
+	return 1;
+}
+
+/*
+ * check for transparent receive data and read max one threshold size if avail
+ */
+int
+hfcpci_empty_fifo_trans(struct bchannel *bch, struct bzfifo *bz, u_char *bdata)
+{
+	unsigned short	*z1r, *z2r;
+	int		new_z2, fcnt, maxlen;
+	u_char		*ptr, *ptr1;
+
+	z1r = &bz->za[MAX_B_FRAMES].z1;		/* pointer to z reg */
+	z2r = z1r + 1;
+
+	fcnt = le16_to_cpu(*z1r) - le16_to_cpu(*z2r);
+	if (!fcnt)
+		return 0;	/* no data avail */
+
+	if (fcnt <= 0)
+		fcnt += B_FIFO_SIZE;	/* bytes actually buffered */
+	if (fcnt > HFCPCI_BTRANS_THRESHOLD)
+		fcnt = HFCPCI_BTRANS_THRESHOLD;		/* limit size */
+
+	new_z2 = le16_to_cpu(*z2r) + fcnt;	/* new position in fifo */
+	if (new_z2 >= (B_FIFO_SIZE + B_SUB_VAL))
+		new_z2 -= B_FIFO_SIZE;	/* buffer wrap */
+
+	bch->rx_skb = mI_alloc_skb(fcnt, GFP_ATOMIC);
+	if (bch->rx_skb) {
+		ptr = skb_put(bch->rx_skb, fcnt);
+		if (le16_to_cpu(*z2r) + fcnt <= B_FIFO_SIZE + B_SUB_VAL)
+			maxlen = fcnt;	/* complete transfer */
+		else
+			maxlen = B_FIFO_SIZE + B_SUB_VAL - le16_to_cpu(*z2r);
+			    /* maximum */
+
+		ptr1 = bdata + (le16_to_cpu(*z2r) - B_SUB_VAL);
+		    /* start of data */
+		memcpy(ptr, ptr1, maxlen);	/* copy data */
+		fcnt -= maxlen;
+
+		if (fcnt) {	/* rest remaining */
+			ptr += maxlen;
+			ptr1 = bdata;	/* start of buffer */
+			memcpy(ptr, ptr1, fcnt);	/* rest */
+		}
+		recv_Bchannel(bch);
+	} else
+		printk(KERN_WARNING "HFCPCI: receive out of memory\n");
+
+	*z2r = cpu_to_le16(new_z2);		/* new position */
+	return 1;
+}
+
+/*
+ * B-channel main receive routine
+ */
+void
+main_rec_hfcpci(struct bchannel *bch)
+{
+	struct hfc_pci	*hc = bch->hw;
+	int		rcnt, real_fifo;
+	int		receive, count = 5;
+	struct bzfifo	*bz;
+	u_char		*bdata;
+	struct zt	*zp;
+
+
+	if ((bch->nr & 2) && (!hc->hw.bswapped)) {
+		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b2;
+		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.rxdat_b2;
+		real_fifo = 1;
+	} else {
+		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.rxbz_b1;
+		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.rxdat_b1;
+		real_fifo = 0;
+	}
+Begin:
+	count--;
+	if (bz->f1 != bz->f2) {
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG "hfcpci rec ch(%x) f1(%d) f2(%d)\n",
+			    bch->nr, bz->f1, bz->f2);
+		zp = &bz->za[bz->f2];
+
+		rcnt = le16_to_cpu(zp->z1) - le16_to_cpu(zp->z2);
+		if (rcnt < 0)
+			rcnt += B_FIFO_SIZE;
+		rcnt++;
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG
+			    "hfcpci rec ch(%x) z1(%x) z2(%x) cnt(%d)\n",
+			    bch->nr, le16_to_cpu(zp->z1),
+			    le16_to_cpu(zp->z2), rcnt);
+		hfcpci_empty_bfifo(bch, bz, bdata, rcnt);
+		rcnt = bz->f1 - bz->f2;
+		if (rcnt < 0)
+			rcnt += MAX_B_FRAMES + 1;
+		if (hc->hw.last_bfifo_cnt[real_fifo] > rcnt + 1) {
+			rcnt = 0;
+			hfcpci_clear_fifo_rx(hc, real_fifo);
+		}
+		hc->hw.last_bfifo_cnt[real_fifo] = rcnt;
+		if (rcnt > 1)
+			receive = 1;
+		else
+			receive = 0;
+	} else if (test_bit(FLG_TRANSPARENT, &bch->Flags))
+		receive = hfcpci_empty_fifo_trans(bch, bz, bdata);
+	else
+		receive = 0;
+	if (count && receive)
+		goto Begin;
+
+}
+
+/*
+ * D-channel send routine
+ */
+static void
+hfcpci_fill_dfifo(struct hfc_pci *hc)
+{
+	struct dchannel	*dch = &hc->dch;
+	int		fcnt;
+	int		count, new_z1, maxlen;
+	struct dfifo	*df;
+	u_char		*src, *dst, new_f1;
+
+	if ((dch->debug & DEBUG_HW_DCHANNEL) && !(dch->debug & DEBUG_HW_DFIFO))
+		printk(KERN_DEBUG "%s\n", __func__);
+
+	if (!dch->tx_skb)
+		return;
+	count = dch->tx_skb->len - dch->tx_idx;
+	if (count <= 0)
+		return;
+	df = &((union fifo_area *) (hc->hw.fifos))->d_chan.d_tx;
+
+	if (dch->debug & DEBUG_HW_DFIFO)
+		printk(KERN_DEBUG "%s:f1(%d) f2(%d) z1(f1)(%x)\n", __func__,
+		    df->f1, df->f2,
+		    le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1));
+	fcnt = df->f1 - df->f2;	/* frame count actually buffered */
+	if (fcnt < 0)
+		fcnt += (MAX_D_FRAMES + 1);	/* if wrap around */
+	if (fcnt > (MAX_D_FRAMES - 1)) {
+		if (dch->debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG
+			    "hfcpci_fill_Dfifo more as 14 frames\n");
+#ifdef ERROR_STATISTIC
+		cs->err_tx++;
+#endif
+		return;
+	}
+	/* now determine free bytes in FIFO buffer */
+	maxlen = le16_to_cpu(df->za[df->f2 & D_FREG_MASK].z2) -
+	    le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1) - 1;
+	if (maxlen <= 0)
+		maxlen += D_FIFO_SIZE;	/* count now contains available bytes */
+
+	if (dch->debug & DEBUG_HW_DCHANNEL)
+		printk(KERN_DEBUG "hfcpci_fill_Dfifo count(%d/%d)\n",
+			count, maxlen);
+	if (count > maxlen) {
+		if (dch->debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG "hfcpci_fill_Dfifo no fifo mem\n");
+		return;
+	}
+	new_z1 = (le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1) + count) &
+	    (D_FIFO_SIZE - 1);
+	new_f1 = ((df->f1 + 1) & D_FREG_MASK) | (D_FREG_MASK + 1);
+	src = dch->tx_skb->data + dch->tx_idx;	/* source pointer */
+	dst = df->data + le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1);
+	maxlen = D_FIFO_SIZE - le16_to_cpu(df->za[df->f1 & D_FREG_MASK].z1);
+	    /* end fifo */
+	if (maxlen > count)
+		maxlen = count;	/* limit size */
+	memcpy(dst, src, maxlen);	/* first copy */
+
+	count -= maxlen;	/* remaining bytes */
+	if (count) {
+		dst = df->data;	/* start of buffer */
+		src += maxlen;	/* new position */
+		memcpy(dst, src, count);
+	}
+	df->za[new_f1 & D_FREG_MASK].z1 = cpu_to_le16(new_z1);
+	    /* for next buffer */
+	df->za[df->f1 & D_FREG_MASK].z1 = cpu_to_le16(new_z1);
+	    /* new pos actual buffer */
+	df->f1 = new_f1;	/* next frame */
+	dch->tx_idx = dch->tx_skb->len;
+}
+
+/*
+ * B-channel send routine
+ */
+static void
+hfcpci_fill_fifo(struct bchannel *bch)
+{
+	struct hfc_pci 	*hc = bch->hw;
+	int		maxlen, fcnt;
+	int		count, new_z1;
+	struct bzfifo	*bz;
+	u_char		*bdata;
+	u_char		new_f1, *src, *dst;
+	unsigned short	*z1t, *z2t;
+
+	if ((bch->debug & DEBUG_HW_BCHANNEL) && !(bch->debug & DEBUG_HW_BFIFO))
+		printk(KERN_DEBUG "%s\n", __func__);
+	if ((!bch->tx_skb) || bch->tx_skb->len <= 0)
+		return;
+	count = bch->tx_skb->len - bch->tx_idx;
+	if ((bch->nr & 2) && (!hc->hw.bswapped)) {
+		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b2;
+		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.txdat_b2;
+	} else {
+		bz = &((union fifo_area *)(hc->hw.fifos))->b_chans.txbz_b1;
+		bdata = ((union fifo_area *)(hc->hw.fifos))->b_chans.txdat_b1;
+	}
+
+	if (test_bit(FLG_TRANSPARENT, &bch->Flags)) {
+		z1t = &bz->za[MAX_B_FRAMES].z1;
+		z2t = z1t + 1;
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG "hfcpci_fill_fifo_trans ch(%x) "
+			    "cnt(%d) z1(%x) z2(%x)\n", bch->nr, count,
+			    le16_to_cpu(*z1t), le16_to_cpu(*z2t));
+		fcnt = le16_to_cpu(*z2t) - le16_to_cpu(*z1t);
+		if (fcnt <= 0)
+			fcnt += B_FIFO_SIZE;
+			    /* fcnt contains available bytes in fifo */
+		fcnt = B_FIFO_SIZE - fcnt;
+		    /* remaining bytes to send (bytes in fifo) */
+next_t_frame:
+		count = bch->tx_skb->len - bch->tx_idx;
+		/* maximum fill shall be HFCPCI_BTRANS_MAX */
+		if (count > HFCPCI_BTRANS_MAX - fcnt)
+			count = HFCPCI_BTRANS_MAX - fcnt;
+		if (count <= 0)
+			return;
+		/* data is suitable for fifo */
+		new_z1 = le16_to_cpu(*z1t) + count;
+		    /* new buffer Position */
+		if (new_z1 >= (B_FIFO_SIZE + B_SUB_VAL))
+			new_z1 -= B_FIFO_SIZE;	/* buffer wrap */
+		src = bch->tx_skb->data + bch->tx_idx;
+		    /* source pointer */
+		dst = bdata + (le16_to_cpu(*z1t) - B_SUB_VAL);
+		maxlen = (B_FIFO_SIZE + B_SUB_VAL) - le16_to_cpu(*z1t);
+		    /* end of fifo */
+		if (bch->debug & DEBUG_HW_BFIFO)
+			printk(KERN_DEBUG "hfcpci_FFt fcnt(%d) "
+			    "maxl(%d) nz1(%x) dst(%p)\n",
+			    fcnt, maxlen, new_z1, dst);
+		fcnt += count;
+		bch->tx_idx += count;
+		if (maxlen > count)
+			maxlen = count;		/* limit size */
+		memcpy(dst, src, maxlen);	/* first copy */
+		count -= maxlen;	/* remaining bytes */
+		if (count) {
+			dst = bdata;	/* start of buffer */
+			src += maxlen;	/* new position */
+			memcpy(dst, src, count);
+		}
+		*z1t = cpu_to_le16(new_z1);	/* now send data */
+		if (bch->tx_idx < bch->tx_skb->len)
+			return;
+		/* send confirm, on trans, free on hdlc. */
+		if (test_bit(FLG_TRANSPARENT, &bch->Flags))
+			confirm_Bsend(bch);
+		dev_kfree_skb(bch->tx_skb);
+		if (get_next_bframe(bch))
+			goto next_t_frame;
+		return;
+	}
+	if (bch->debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG
+		    "%s: ch(%x) f1(%d) f2(%d) z1(f1)(%x)\n",
+		    __func__, bch->nr, bz->f1, bz->f2,
+		    bz->za[bz->f1].z1);
+	fcnt = bz->f1 - bz->f2;	/* frame count actually buffered */
+	if (fcnt < 0)
+		fcnt += (MAX_B_FRAMES + 1);	/* if wrap around */
+	if (fcnt > (MAX_B_FRAMES - 1)) {
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG
+			    "hfcpci_fill_Bfifo more as 14 frames\n");
+		return;
+	}
+	/* now determine free bytes in FIFO buffer */
+	maxlen = le16_to_cpu(bz->za[bz->f2].z2) -
+	    le16_to_cpu(bz->za[bz->f1].z1) - 1;
+	if (maxlen <= 0)
+		maxlen += B_FIFO_SIZE;	/* count now contains available bytes */
+
+	if (bch->debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG "hfcpci_fill_fifo ch(%x) count(%d/%d)\n",
+			bch->nr, count, maxlen);
+
+	if (maxlen < count) {
+		if (bch->debug & DEBUG_HW_BCHANNEL)
+			printk(KERN_DEBUG "hfcpci_fill_fifo no fifo mem\n");
+		return;
+	}
+	new_z1 = le16_to_cpu(bz->za[bz->f1].z1) + count;
+	    /* new buffer Position */
+	if (new_z1 >= (B_FIFO_SIZE + B_SUB_VAL))
+		new_z1 -= B_FIFO_SIZE;	/* buffer wrap */
+
+	new_f1 = ((bz->f1 + 1) & MAX_B_FRAMES);
+	src = bch->tx_skb->data + bch->tx_idx;	/* source pointer */
+	dst = bdata + (le16_to_cpu(bz->za[bz->f1].z1) - B_SUB_VAL);
+	maxlen = (B_FIFO_SIZE + B_SUB_VAL) - le16_to_cpu(bz->za[bz->f1].z1);
+	    /* end fifo */
+	if (maxlen > count)
+		maxlen = count;	/* limit size */
+	memcpy(dst, src, maxlen);	/* first copy */
+
+	count -= maxlen;	/* remaining bytes */
+	if (count) {
+		dst = bdata;	/* start of buffer */
+		src += maxlen;	/* new position */
+		memcpy(dst, src, count);
+	}
+	bz->za[new_f1].z1 = cpu_to_le16(new_z1);	/* for next buffer */
+	bz->f1 = new_f1;	/* next frame */
+	dev_kfree_skb(bch->tx_skb);
+	get_next_bframe(bch);
+}
+
+
+
+/*
+ * handle L1 state changes TE
+ */
+
+static void
+ph_state_te(struct dchannel *dch)
+{
+	if (dch->debug)
+		printk(KERN_DEBUG "%s: TE newstate %x\n",
+			__func__, dch->state);
+	switch (dch->state) {
+	case 0:
+		l1_event(dch->l1, HW_RESET_IND);
+		break;
+	case 3:
+		l1_event(dch->l1, HW_DEACT_IND);
+		break;
+	case 5:
+	case 8:
+		l1_event(dch->l1, ANYSIGNAL);
+		break;
+	case 6:
+		l1_event(dch->l1, INFO2);
+		break;
+	case 7:
+		l1_event(dch->l1, INFO4_P8);
+		break;
+	}
+}
+
+/*
+ * handle L1 state changes NT
+ */
+
+static void
+handle_nt_timer3(struct dchannel *dch) {
+	struct hfc_pci	*hc = dch->hw;
+
+	test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+	hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+	hc->hw.nt_timer = 0;
+	test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+	if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+		hc->hw.mst_m |= HFCPCI_MASTER;
+	Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+	_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+	    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+}
+
+static void
+ph_state_nt(struct dchannel *dch)
+{
+	struct hfc_pci	*hc = dch->hw;
+
+	if (dch->debug)
+		printk(KERN_DEBUG "%s: NT newstate %x\n",
+			__func__, dch->state);
+	switch (dch->state) {
+	case 2:
+		if (hc->hw.nt_timer < 0) {
+			hc->hw.nt_timer = 0;
+			test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+			test_and_clear_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+			hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+			Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+			/* Clear already pending ints */
+			if (Read_hfc(hc, HFCPCI_INT_S1));
+			Write_hfc(hc, HFCPCI_STATES, 4 | HFCPCI_LOAD_STATE);
+			udelay(10);
+			Write_hfc(hc, HFCPCI_STATES, 4);
+			dch->state = 4;
+		} else if (hc->hw.nt_timer == 0) {
+			hc->hw.int_m1 |= HFCPCI_INTS_TIMER;
+			Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+			hc->hw.nt_timer = NT_T1_COUNT;
+			hc->hw.ctmt &= ~HFCPCI_AUTO_TIMER;
+			hc->hw.ctmt |= HFCPCI_TIM3_125;
+			Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt |
+				HFCPCI_CLTIMER);
+			test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+			test_and_set_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+			/* allow G2 -> G3 transition */
+			Write_hfc(hc, HFCPCI_STATES, 2 | HFCPCI_NT_G2_G3);
+		} else {
+			Write_hfc(hc, HFCPCI_STATES, 2 | HFCPCI_NT_G2_G3);
+		}
+		break;
+	case 1:
+		hc->hw.nt_timer = 0;
+		test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+		test_and_clear_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+		hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+		Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		hc->hw.mst_m &= ~HFCPCI_MASTER;
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+		_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+		    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+		break;
+	case 4:
+		hc->hw.nt_timer = 0;
+		test_and_clear_bit(FLG_HFC_TIMER_T3, &dch->Flags);
+		test_and_clear_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+		hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+		Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+		break;
+	case 3:
+		if (!test_and_set_bit(FLG_HFC_TIMER_T3, &dch->Flags)) {
+			if (!test_and_clear_bit(FLG_L2_ACTIVATED,
+			    &dch->Flags)) {
+				handle_nt_timer3(dch);
+				break;
+			}
+			test_and_clear_bit(FLG_HFC_TIMER_T1, &dch->Flags);
+			hc->hw.int_m1 |= HFCPCI_INTS_TIMER;
+			Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+			hc->hw.nt_timer = NT_T3_COUNT;
+			hc->hw.ctmt &= ~HFCPCI_AUTO_TIMER;
+			hc->hw.ctmt |= HFCPCI_TIM3_125;
+			Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt |
+				HFCPCI_CLTIMER);
+		}
+		break;
+	}
+}
+
+static void
+ph_state(struct dchannel *dch)
+{
+	struct hfc_pci	*hc = dch->hw;
+
+	if (hc->hw.protocol == ISDN_P_NT_S0) {
+		if (test_bit(FLG_HFC_TIMER_T3, &dch->Flags) &&
+		    hc->hw.nt_timer < 0)
+			handle_nt_timer3(dch);
+		else
+			ph_state_nt(dch);
+	} else
+		ph_state_te(dch);
+}
+
+/*
+ * Layer 1 callback function
+ */
+static int
+hfc_l1callback(struct dchannel *dch, u_int cmd)
+{
+	struct hfc_pci		*hc = dch->hw;
+
+	switch (cmd) {
+	case INFO3_P8:
+	case INFO3_P10:
+		if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+			hc->hw.mst_m |= HFCPCI_MASTER;
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		break;
+	case HW_RESET_REQ:
+		Write_hfc(hc, HFCPCI_STATES, HFCPCI_LOAD_STATE | 3);
+		/* HFC ST 3 */
+		udelay(6);
+		Write_hfc(hc, HFCPCI_STATES, 3);	/* HFC ST 2 */
+		if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+			hc->hw.mst_m |= HFCPCI_MASTER;
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		Write_hfc(hc, HFCPCI_STATES, HFCPCI_ACTIVATE |
+		   HFCPCI_DO_ACTION);
+		l1_event(dch->l1, HW_POWERUP_IND);
+		break;
+	case HW_DEACT_REQ:
+		hc->hw.mst_m &= ~HFCPCI_MASTER;
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		skb_queue_purge(&dch->squeue);
+		if (dch->tx_skb) {
+			dev_kfree_skb(dch->tx_skb);
+			dch->tx_skb = NULL;
+		}
+		dch->tx_idx = 0;
+		if (dch->rx_skb) {
+			dev_kfree_skb(dch->rx_skb);
+			dch->rx_skb = NULL;
+		}
+		test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+		if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+			del_timer(&dch->timer);
+		break;
+	case HW_POWERUP_REQ:
+		Write_hfc(hc, HFCPCI_STATES, HFCPCI_DO_ACTION);
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * Interrupt handler
+ */
+static inline void
+tx_birq(struct bchannel *bch)
+{
+	if (bch->tx_skb && bch->tx_idx < bch->tx_skb->len)
+		hfcpci_fill_fifo(bch);
+	else {
+		if (bch->tx_skb)
+			dev_kfree_skb(bch->tx_skb);
+		if (get_next_bframe(bch))
+			hfcpci_fill_fifo(bch);
+	}
+}
+
+static inline void
+tx_dirq(struct dchannel *dch)
+{
+	if (dch->tx_skb && dch->tx_idx < dch->tx_skb->len)
+		hfcpci_fill_dfifo(dch->hw);
+	else {
+		if (dch->tx_skb)
+			dev_kfree_skb(dch->tx_skb);
+		if (get_next_dframe(dch))
+			hfcpci_fill_dfifo(dch->hw);
+	}
+}
+
+static irqreturn_t
+hfcpci_int(int intno, void *dev_id)
+{
+	struct hfc_pci	*hc = dev_id;
+	u_char		exval;
+	struct bchannel	*bch;
+	u_char		val, stat;
+
+	spin_lock(&hc->lock);
+	if (!(hc->hw.int_m2 & 0x08)) {
+		spin_unlock(&hc->lock);
+		return IRQ_NONE; /* not initialised */
+	}
+	stat = Read_hfc(hc, HFCPCI_STATUS);
+	if (HFCPCI_ANYINT & stat) {
+		val = Read_hfc(hc, HFCPCI_INT_S1);
+		if (hc->dch.debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG
+			    "HFC-PCI: stat(%02x) s1(%02x)\n", stat, val);
+	} else {
+		/* shared */
+		spin_unlock(&hc->lock);
+		return IRQ_NONE;
+	}
+	hc->irqcnt++;
+
+	if (hc->dch.debug & DEBUG_HW_DCHANNEL)
+		printk(KERN_DEBUG "HFC-PCI irq %x\n", val);
+	val &= hc->hw.int_m1;
+	if (val & 0x40) {	/* state machine irq */
+		exval = Read_hfc(hc, HFCPCI_STATES) & 0xf;
+		if (hc->dch.debug & DEBUG_HW_DCHANNEL)
+			printk(KERN_DEBUG "ph_state chg %d->%d\n",
+				hc->dch.state, exval);
+		hc->dch.state = exval;
+		schedule_event(&hc->dch, FLG_PHCHANGE);
+		val &= ~0x40;
+	}
+	if (val & 0x80) {	/* timer irq */
+		if (hc->hw.protocol == ISDN_P_NT_S0) {
+			if ((--hc->hw.nt_timer) < 0)
+				schedule_event(&hc->dch, FLG_PHCHANGE);
+		}
+		val &= ~0x80;
+		Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt | HFCPCI_CLTIMER);
+	}
+	if (val & 0x08) {
+		bch = Sel_BCS(hc, hc->hw.bswapped ? 2 : 1);
+		if (bch)
+			main_rec_hfcpci(bch);
+		else if (hc->dch.debug)
+			printk(KERN_DEBUG "hfcpci spurious 0x08 IRQ\n");
+	}
+	if (val & 0x10) {
+		bch = Sel_BCS(hc, 2);
+		if (bch)
+			main_rec_hfcpci(bch);
+		else if (hc->dch.debug)
+			printk(KERN_DEBUG "hfcpci spurious 0x10 IRQ\n");
+	}
+	if (val & 0x01) {
+		bch = Sel_BCS(hc, hc->hw.bswapped ? 2 : 1);
+		if (bch)
+			tx_birq(bch);
+		else if (hc->dch.debug)
+			printk(KERN_DEBUG "hfcpci spurious 0x01 IRQ\n");
+	}
+	if (val & 0x02) {
+		bch = Sel_BCS(hc, 2);
+		if (bch)
+			tx_birq(bch);
+		else if (hc->dch.debug)
+			printk(KERN_DEBUG "hfcpci spurious 0x02 IRQ\n");
+	}
+	if (val & 0x20)
+		receive_dmsg(hc);
+	if (val & 0x04) {	/* dframe transmitted */
+		if (test_and_clear_bit(FLG_BUSY_TIMER, &hc->dch.Flags))
+			del_timer(&hc->dch.timer);
+		tx_dirq(&hc->dch);
+	}
+	spin_unlock(&hc->lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * timer callback for D-chan busy resolution. Currently no function
+ */
+static void
+hfcpci_dbusy_timer(struct hfc_pci *hc)
+{
+}
+
+/*
+ * activate/deactivate hardware for selected channels and mode
+ */
+static int
+mode_hfcpci(struct bchannel *bch, int bc, int protocol)
+{
+	struct hfc_pci	*hc = bch->hw;
+	int		fifo2;
+	u_char		rx_slot = 0, tx_slot = 0, pcm_mode;
+
+	if (bch->debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG
+		    "HFCPCI bchannel protocol %x-->%x ch %x-->%x\n",
+		    bch->state, protocol, bch->nr, bc);
+
+	fifo2 = bc;
+	pcm_mode = (bc>>24) & 0xff;
+	if (pcm_mode) { /* PCM SLOT USE */
+		if (!test_bit(HFC_CFG_PCM, &hc->cfg))
+			printk(KERN_WARNING
+			    "%s: pcm channel id without HFC_CFG_PCM\n",
+			    __func__);
+		rx_slot = (bc>>8) & 0xff;
+		tx_slot = (bc>>16) & 0xff;
+		bc = bc & 0xff;
+	} else if (test_bit(HFC_CFG_PCM, &hc->cfg) &&
+	    (protocol > ISDN_P_NONE))
+		printk(KERN_WARNING "%s: no pcm channel id but HFC_CFG_PCM\n",
+		    __func__);
+	if (hc->chanlimit > 1) {
+		hc->hw.bswapped = 0;	/* B1 and B2 normal mode */
+		hc->hw.sctrl_e &= ~0x80;
+	} else {
+		if (bc & 2) {
+			if (protocol != ISDN_P_NONE) {
+				hc->hw.bswapped = 1; /* B1 and B2 exchanged */
+				hc->hw.sctrl_e |= 0x80;
+			} else {
+				hc->hw.bswapped = 0; /* B1 and B2 normal mode */
+				hc->hw.sctrl_e &= ~0x80;
+			}
+			fifo2 = 1;
+		} else {
+			hc->hw.bswapped = 0;	/* B1 and B2 normal mode */
+			hc->hw.sctrl_e &= ~0x80;
+		}
+	}
+	switch (protocol) {
+	case (-1): /* used for init */
+		bch->state = -1;
+		bch->nr = bc;
+	case (ISDN_P_NONE):
+		if (bch->state == ISDN_P_NONE)
+			return 0;
+		if (bc & 2) {
+			hc->hw.sctrl &= ~SCTRL_B2_ENA;
+			hc->hw.sctrl_r &= ~SCTRL_B2_ENA;
+		} else {
+			hc->hw.sctrl &= ~SCTRL_B1_ENA;
+			hc->hw.sctrl_r &= ~SCTRL_B1_ENA;
+		}
+		if (fifo2 & 2) {
+			hc->hw.fifo_en &= ~HFCPCI_FIFOEN_B2;
+			hc->hw.int_m1 &= ~(HFCPCI_INTS_B2TRANS +
+				HFCPCI_INTS_B2REC);
+		} else {
+			hc->hw.fifo_en &= ~HFCPCI_FIFOEN_B1;
+			hc->hw.int_m1 &= ~(HFCPCI_INTS_B1TRANS +
+				HFCPCI_INTS_B1REC);
+		}
+#ifdef REVERSE_BITORDER
+		if (bch->nr & 2)
+			hc->hw.cirm &= 0x7f;
+		else
+			hc->hw.cirm &= 0xbf;
+#endif
+		bch->state = ISDN_P_NONE;
+		bch->nr = bc;
+		test_and_clear_bit(FLG_HDLC, &bch->Flags);
+		test_and_clear_bit(FLG_TRANSPARENT, &bch->Flags);
+		break;
+	case (ISDN_P_B_RAW):
+		bch->state = protocol;
+		bch->nr = bc;
+		hfcpci_clear_fifo_rx(hc, (fifo2 & 2)?1:0);
+		hfcpci_clear_fifo_tx(hc, (fifo2 & 2)?1:0);
+		if (bc & 2) {
+			hc->hw.sctrl |= SCTRL_B2_ENA;
+			hc->hw.sctrl_r |= SCTRL_B2_ENA;
+#ifdef REVERSE_BITORDER
+			hc->hw.cirm |= 0x80;
+#endif
+		} else {
+			hc->hw.sctrl |= SCTRL_B1_ENA;
+			hc->hw.sctrl_r |= SCTRL_B1_ENA;
+#ifdef REVERSE_BITORDER
+			hc->hw.cirm |= 0x40;
+#endif
+		}
+		if (fifo2 & 2) {
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2;
+			hc->hw.int_m1 |= (HFCPCI_INTS_B2TRANS +
+			    HFCPCI_INTS_B2REC);
+			hc->hw.ctmt |= 2;
+			hc->hw.conn &= ~0x18;
+		} else {
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B1;
+			hc->hw.int_m1 |= (HFCPCI_INTS_B1TRANS +
+			    HFCPCI_INTS_B1REC);
+			hc->hw.ctmt |= 1;
+			hc->hw.conn &= ~0x03;
+		}
+		test_and_set_bit(FLG_TRANSPARENT, &bch->Flags);
+		break;
+	case (ISDN_P_B_HDLC):
+		bch->state = protocol;
+		bch->nr = bc;
+		hfcpci_clear_fifo_rx(hc, (fifo2 & 2)?1:0);
+		hfcpci_clear_fifo_tx(hc, (fifo2 & 2)?1:0);
+		if (bc & 2) {
+			hc->hw.sctrl |= SCTRL_B2_ENA;
+			hc->hw.sctrl_r |= SCTRL_B2_ENA;
+		} else {
+			hc->hw.sctrl |= SCTRL_B1_ENA;
+			hc->hw.sctrl_r |= SCTRL_B1_ENA;
+		}
+		if (fifo2 & 2) {
+			hc->hw.last_bfifo_cnt[1] = 0;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2;
+			hc->hw.int_m1 |= (HFCPCI_INTS_B2TRANS +
+			    HFCPCI_INTS_B2REC);
+			hc->hw.ctmt &= ~2;
+			hc->hw.conn &= ~0x18;
+		} else {
+			hc->hw.last_bfifo_cnt[0] = 0;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B1;
+			hc->hw.int_m1 |= (HFCPCI_INTS_B1TRANS +
+			    HFCPCI_INTS_B1REC);
+			hc->hw.ctmt &= ~1;
+			hc->hw.conn &= ~0x03;
+		}
+		test_and_set_bit(FLG_HDLC, &bch->Flags);
+		break;
+	default:
+		printk(KERN_DEBUG "prot not known %x\n", protocol);
+		return -ENOPROTOOPT;
+	}
+	if (test_bit(HFC_CFG_PCM, &hc->cfg)) {
+		if ((protocol == ISDN_P_NONE) ||
+			(protocol == -1)) {	/* init case */
+			rx_slot = 0;
+			tx_slot = 0;
+		} else {
+			if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg)) {
+				rx_slot |= 0xC0;
+				tx_slot |= 0xC0;
+			} else {
+				rx_slot |= 0x80;
+				tx_slot |= 0x80;
+			}
+		}
+		if (bc & 2) {
+			hc->hw.conn &= 0xc7;
+			hc->hw.conn |= 0x08;
+			printk(KERN_DEBUG "%s: Write_hfc: B2_SSL 0x%x\n",
+				__func__, tx_slot);
+			printk(KERN_DEBUG "%s: Write_hfc: B2_RSL 0x%x\n",
+				__func__, rx_slot);
+			Write_hfc(hc, HFCPCI_B2_SSL, tx_slot);
+			Write_hfc(hc, HFCPCI_B2_RSL, rx_slot);
+		} else {
+			hc->hw.conn &= 0xf8;
+			hc->hw.conn |= 0x01;
+			printk(KERN_DEBUG "%s: Write_hfc: B1_SSL 0x%x\n",
+				__func__, tx_slot);
+			printk(KERN_DEBUG "%s: Write_hfc: B1_RSL 0x%x\n",
+				__func__, rx_slot);
+			Write_hfc(hc, HFCPCI_B1_SSL, tx_slot);
+			Write_hfc(hc, HFCPCI_B1_RSL, rx_slot);
+		}
+	}
+	Write_hfc(hc, HFCPCI_SCTRL_E, hc->hw.sctrl_e);
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	Write_hfc(hc, HFCPCI_SCTRL, hc->hw.sctrl);
+	Write_hfc(hc, HFCPCI_SCTRL_R, hc->hw.sctrl_r);
+	Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt);
+	Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+#ifdef REVERSE_BITORDER
+	Write_hfc(hc, HFCPCI_CIRM, hc->hw.cirm);
+#endif
+	return 0;
+}
+
+static int
+set_hfcpci_rxtest(struct bchannel *bch, int protocol, int chan)
+{
+	struct hfc_pci	*hc = bch->hw;
+
+	if (bch->debug & DEBUG_HW_BCHANNEL)
+		printk(KERN_DEBUG
+		    "HFCPCI bchannel test rx protocol %x-->%x ch %x-->%x\n",
+		    bch->state, protocol, bch->nr, chan);
+	if (bch->nr != chan) {
+		printk(KERN_DEBUG
+		    "HFCPCI rxtest wrong channel parameter %x/%x\n",
+		    bch->nr, chan);
+		return -EINVAL;
+	}
+	switch (protocol) {
+	case (ISDN_P_B_RAW):
+		bch->state = protocol;
+		hfcpci_clear_fifo_rx(hc, (chan & 2)?1:0);
+		if (chan & 2) {
+			hc->hw.sctrl_r |= SCTRL_B2_ENA;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2RX;
+			hc->hw.int_m1 |= HFCPCI_INTS_B2REC;
+			hc->hw.ctmt |= 2;
+			hc->hw.conn &= ~0x18;
+#ifdef REVERSE_BITORDER
+			hc->hw.cirm |= 0x80;
+#endif
+		} else {
+			hc->hw.sctrl_r |= SCTRL_B1_ENA;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B1RX;
+			hc->hw.int_m1 |= HFCPCI_INTS_B1REC;
+			hc->hw.ctmt |= 1;
+			hc->hw.conn &= ~0x03;
+#ifdef REVERSE_BITORDER
+			hc->hw.cirm |= 0x40;
+#endif
+		}
+		break;
+	case (ISDN_P_B_HDLC):
+		bch->state = protocol;
+		hfcpci_clear_fifo_rx(hc, (chan & 2)?1:0);
+		if (chan & 2) {
+			hc->hw.sctrl_r |= SCTRL_B2_ENA;
+			hc->hw.last_bfifo_cnt[1] = 0;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B2RX;
+			hc->hw.int_m1 |= HFCPCI_INTS_B2REC;
+			hc->hw.ctmt &= ~2;
+			hc->hw.conn &= ~0x18;
+		} else {
+			hc->hw.sctrl_r |= SCTRL_B1_ENA;
+			hc->hw.last_bfifo_cnt[0] = 0;
+			hc->hw.fifo_en |= HFCPCI_FIFOEN_B1RX;
+			hc->hw.int_m1 |= HFCPCI_INTS_B1REC;
+			hc->hw.ctmt &= ~1;
+			hc->hw.conn &= ~0x03;
+		}
+		break;
+	default:
+		printk(KERN_DEBUG "prot not known %x\n", protocol);
+		return -ENOPROTOOPT;
+	}
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+	Write_hfc(hc, HFCPCI_FIFO_EN, hc->hw.fifo_en);
+	Write_hfc(hc, HFCPCI_SCTRL_R, hc->hw.sctrl_r);
+	Write_hfc(hc, HFCPCI_CTMT, hc->hw.ctmt);
+	Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+#ifdef REVERSE_BITORDER
+	Write_hfc(hc, HFCPCI_CIRM, hc->hw.cirm);
+#endif
+	return 0;
+}
+
+static void
+deactivate_bchannel(struct bchannel *bch)
+{
+	struct hfc_pci	*hc = bch->hw;
+	u_long		flags;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
+		dev_kfree_skb(bch->next_skb);
+		bch->next_skb = NULL;
+	}
+	if (bch->tx_skb) {
+		dev_kfree_skb(bch->tx_skb);
+		bch->tx_skb = NULL;
+	}
+	bch->tx_idx = 0;
+	if (bch->rx_skb) {
+		dev_kfree_skb(bch->rx_skb);
+		bch->rx_skb = NULL;
+	}
+	mode_hfcpci(bch, bch->nr, ISDN_P_NONE);
+	test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+	test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+	spin_unlock_irqrestore(&hc->lock, flags);
+}
+
+/*
+ * Layer 1 B-channel hardware access
+ */
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+	int			ret = 0;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = 0;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n", __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+static int
+hfc_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct bchannel	*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_pci	*hc = bch->hw;
+	int		ret = -EINVAL;
+	u_long		flags;
+
+	if (bch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n", __func__, cmd, arg);
+	switch (cmd) {
+	case HW_TESTRX_RAW:
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = set_hfcpci_rxtest(bch, ISDN_P_B_RAW, (int)(long)arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case HW_TESTRX_HDLC:
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = set_hfcpci_rxtest(bch, ISDN_P_B_HDLC, (int)(long)arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case HW_TESTRX_OFF:
+		spin_lock_irqsave(&hc->lock, flags);
+		mode_hfcpci(bch, bch->nr, ISDN_P_NONE);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		ret = 0;
+		break;
+	case CLOSE_CHANNEL:
+		test_and_clear_bit(FLG_OPEN, &bch->Flags);
+		if (test_bit(FLG_ACTIVE, &bch->Flags))
+			deactivate_bchannel(bch);
+		ch->protocol = ISDN_P_NONE;
+		ch->peer = NULL;
+		module_put(THIS_MODULE);
+		ret = 0;
+		break;
+	case CONTROL_CHANNEL:
+		ret = channel_bctrl(bch, arg);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown prim(%x)\n",
+			__func__, cmd);
+	}
+	return ret;
+}
+
+/*
+ * Layer2 -> Layer 1 Dchannel data
+ */
+static int
+hfcpci_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_pci		*hc = dch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = dchannel_senddata(dch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcpci_fill_dfifo(dch->hw);
+			ret = 0;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->hw.protocol == ISDN_P_NT_S0) {
+			ret = 0;
+			if (test_bit(HFC_CFG_MASTER, &hc->cfg))
+				hc->hw.mst_m |= HFCPCI_MASTER;
+			Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+			if (test_bit(FLG_ACTIVE, &dch->Flags)) {
+				spin_unlock_irqrestore(&hc->lock, flags);
+				_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+				    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+				break;
+			}
+			test_and_set_bit(FLG_L2_ACTIVATED, &dch->Flags);
+			Write_hfc(hc, HFCPCI_STATES, HFCPCI_ACTIVATE |
+			    HFCPCI_DO_ACTION | 1);
+		} else
+			ret = l1_event(dch->l1, hh->prim);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case PH_DEACTIVATE_REQ:
+		test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->hw.protocol == ISDN_P_NT_S0) {
+			/* prepare deactivation */
+			Write_hfc(hc, HFCPCI_STATES, 0x40);
+			skb_queue_purge(&dch->squeue);
+			if (dch->tx_skb) {
+				dev_kfree_skb(dch->tx_skb);
+				dch->tx_skb = NULL;
+			}
+			dch->tx_idx = 0;
+			if (dch->rx_skb) {
+				dev_kfree_skb(dch->rx_skb);
+				dch->rx_skb = NULL;
+			}
+			test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+			if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+				del_timer(&dch->timer);
+#ifdef FIXME
+			if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
+				dchannel_sched_event(&hc->dch, D_CLEARBUSY);
+#endif
+			hc->hw.mst_m &= ~HFCPCI_MASTER;
+			Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+			ret = 0;
+		} else {
+			ret = l1_event(dch->l1, hh->prim);
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+/*
+ * Layer2 -> Layer 1 Bchannel data
+ */
+static int
+hfcpci_l2l1B(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_pci		*hc = bch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = bchannel_senddata(bch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcpci_fill_fifo(bch);
+			ret = 0;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+				queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags))
+			ret = mode_hfcpci(bch, bch->nr, ch->protocol);
+		else
+			ret = 0;
+		spin_unlock_irqrestore(&hc->lock, flags);
+		if (!ret)
+			_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+				NULL, GFP_KERNEL);
+		break;
+	case PH_DEACTIVATE_REQ:
+		deactivate_bchannel(bch);
+		_queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0,
+			NULL, GFP_KERNEL);
+		ret = 0;
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+/*
+ * called for card init message
+ */
+
+void
+inithfcpci(struct hfc_pci *hc)
+{
+	printk(KERN_DEBUG "inithfcpci: entered\n");
+	hc->dch.timer.function = (void *) hfcpci_dbusy_timer;
+	hc->dch.timer.data = (long) &hc->dch;
+	init_timer(&hc->dch.timer);
+	hc->chanlimit = 2;
+	mode_hfcpci(&hc->bch[0], 1, -1);
+	mode_hfcpci(&hc->bch[1], 2, -1);
+}
+
+
+static int
+init_card(struct hfc_pci *hc)
+{
+	int	cnt = 3;
+	u_long	flags;
+
+	printk(KERN_DEBUG "init_card: entered\n");
+
+
+	spin_lock_irqsave(&hc->lock, flags);
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	if (request_irq(hc->irq, hfcpci_int, IRQF_SHARED, "HFC PCI", hc)) {
+		printk(KERN_WARNING
+		    "mISDN: couldn't get interrupt %d\n", hc->irq);
+		return -EIO;
+	}
+	spin_lock_irqsave(&hc->lock, flags);
+	reset_hfcpci(hc);
+	while (cnt) {
+		inithfcpci(hc);
+		/*
+		 * Finally enable IRQ output
+		 * this is only allowed, if an IRQ routine is allready
+		 * established for this HFC, so don't do that earlier
+		 */
+		enable_hwirq(hc);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		/* Timeout 80ms */
+		current->state = TASK_UNINTERRUPTIBLE;
+		schedule_timeout((80*HZ)/1000);
+		printk(KERN_INFO "HFC PCI: IRQ %d count %d\n",
+			hc->irq, hc->irqcnt);
+		/* now switch timer interrupt off */
+		spin_lock_irqsave(&hc->lock, flags);
+		hc->hw.int_m1 &= ~HFCPCI_INTS_TIMER;
+		Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+		/* reinit mode reg */
+		Write_hfc(hc, HFCPCI_MST_MODE, hc->hw.mst_m);
+		if (!hc->irqcnt) {
+			printk(KERN_WARNING
+			    "HFC PCI: IRQ(%d) getting no interrupts "
+			    "during init %d\n", hc->irq, 4 - cnt);
+			if (cnt == 1) {
+				spin_unlock_irqrestore(&hc->lock, flags);
+				return -EIO;
+			} else {
+				reset_hfcpci(hc);
+				cnt--;
+			}
+		} else {
+			spin_unlock_irqrestore(&hc->lock, flags);
+			hc->initdone = 1;
+			return 0;
+		}
+	}
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	free_irq(hc->irq, hc);
+	return -EIO;
+}
+
+static int
+channel_ctrl(struct hfc_pci *hc, struct mISDN_ctrl_req *cq)
+{
+	int	ret = 0;
+	u_char	slot;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_LOOP | MISDN_CTRL_CONNECT |
+		    MISDN_CTRL_DISCONNECT;
+		break;
+	case MISDN_CTRL_LOOP:
+		/* channel 0 disabled loop */
+		if (cq->channel < 0 || cq->channel > 2) {
+			ret = -EINVAL;
+			break;
+		}
+		if (cq->channel & 1) {
+			if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg))
+				slot = 0xC0;
+			else
+				slot = 0x80;
+			printk(KERN_DEBUG "%s: Write_hfc: B1_SSL/RSL 0x%x\n",
+			    __func__, slot);
+			Write_hfc(hc, HFCPCI_B1_SSL, slot);
+			Write_hfc(hc, HFCPCI_B1_RSL, slot);
+			hc->hw.conn = (hc->hw.conn & ~7) | 6;
+			Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+		}
+		if (cq->channel & 2) {
+			if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg))
+				slot = 0xC1;
+			else
+				slot = 0x81;
+			printk(KERN_DEBUG "%s: Write_hfc: B2_SSL/RSL 0x%x\n",
+			    __func__, slot);
+			Write_hfc(hc, HFCPCI_B2_SSL, slot);
+			Write_hfc(hc, HFCPCI_B2_RSL, slot);
+			hc->hw.conn = (hc->hw.conn & ~0x38) | 0x30;
+			Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+		}
+		if (cq->channel & 3)
+			hc->hw.trm |= 0x80;	/* enable IOM-loop */
+		else {
+			hc->hw.conn = (hc->hw.conn & ~0x3f) | 0x09;
+			Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+			hc->hw.trm &= 0x7f;	/* disable IOM-loop */
+		}
+		Write_hfc(hc, HFCPCI_TRM, hc->hw.trm);
+		break;
+	case MISDN_CTRL_CONNECT:
+		if (cq->channel == cq->p1) {
+			ret = -EINVAL;
+			break;
+		}
+		if (cq->channel < 1 || cq->channel > 2 ||
+		    cq->p1 < 1 || cq->p1 > 2) {
+			ret = -EINVAL;
+			break;
+		}
+		if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg))
+			slot = 0xC0;
+		else
+			slot = 0x80;
+		printk(KERN_DEBUG "%s: Write_hfc: B1_SSL/RSL 0x%x\n",
+		    __func__, slot);
+		Write_hfc(hc, HFCPCI_B1_SSL, slot);
+		Write_hfc(hc, HFCPCI_B2_RSL, slot);
+		if (test_bit(HFC_CFG_SW_DD_DU, &hc->cfg))
+			slot = 0xC1;
+		else
+			slot = 0x81;
+		printk(KERN_DEBUG "%s: Write_hfc: B2_SSL/RSL 0x%x\n",
+		    __func__, slot);
+		Write_hfc(hc, HFCPCI_B2_SSL, slot);
+		Write_hfc(hc, HFCPCI_B1_RSL, slot);
+		hc->hw.conn = (hc->hw.conn & ~0x3f) | 0x36;
+		Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+		hc->hw.trm |= 0x80;
+		Write_hfc(hc, HFCPCI_TRM, hc->hw.trm);
+		break;
+	case MISDN_CTRL_DISCONNECT:
+		hc->hw.conn = (hc->hw.conn & ~0x3f) | 0x09;
+		Write_hfc(hc, HFCPCI_CONNECT, hc->hw.conn);
+		hc->hw.trm &= 0x7f;	/* disable IOM-loop */
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+open_dchannel(struct hfc_pci *hc, struct mISDNchannel *ch,
+    struct channel_req *rq)
+{
+	int err = 0;
+
+	if (debug & DEBUG_HW_OPEN)
+		printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
+		    hc->dch.dev.id, __builtin_return_address(0));
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if (!hc->initdone) {
+		if (rq->protocol == ISDN_P_TE_S0) {
+			err = create_l1(&hc->dch, hfc_l1callback);
+			if (err)
+				return err;
+		}
+		hc->hw.protocol = rq->protocol;
+		ch->protocol = rq->protocol;
+		err = init_card(hc);
+		if (err)
+			return err;
+	} else {
+		if (rq->protocol != ch->protocol) {
+			if (hc->hw.protocol == ISDN_P_TE_S0)
+				l1_event(hc->dch.l1, CLOSE_CHANNEL);
+			hc->hw.protocol = rq->protocol;
+			ch->protocol = rq->protocol;
+			hfcpci_setmode(hc);
+		}
+	}
+
+	if (((ch->protocol == ISDN_P_NT_S0) && (hc->dch.state == 3)) ||
+	    ((ch->protocol == ISDN_P_TE_S0) && (hc->dch.state == 7))) {
+		_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY,
+		    0, NULL, GFP_KERNEL);
+	}
+	rq->ch = ch;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+static int
+open_bchannel(struct hfc_pci *hc, struct channel_req *rq)
+{
+	struct bchannel		*bch;
+
+	if (rq->adr.channel > 2)
+		return -EINVAL;
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	bch = &hc->bch[rq->adr.channel - 1];
+	if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+		return -EBUSY; /* b-channel can be only open once */
+	bch->ch.protocol = rq->protocol;
+	rq->ch = &bch->ch; /* TODO: E-channel */
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+/*
+ * device control function
+ */
+static int
+hfc_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_pci		*hc = dch->hw;
+	struct channel_req	*rq;
+	int			err = 0;
+
+	if (dch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		rq = arg;
+		if (rq->adr.channel == 0)
+			err = open_dchannel(hc, ch, rq);
+		else
+			err = open_bchannel(hc, rq);
+		break;
+	case CLOSE_CHANNEL:
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
+			    __func__, hc->dch.dev.id,
+			    __builtin_return_address(0));
+		module_put(THIS_MODULE);
+		break;
+	case CONTROL_CHANNEL:
+		err = channel_ctrl(hc, arg);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		return -EINVAL;
+	}
+	return err;
+}
+
+static int
+setup_hw(struct hfc_pci *hc)
+{
+	void	*buffer;
+
+	printk(KERN_INFO "mISDN: HFC-PCI driver %s\n", hfcpci_revision);
+	hc->hw.cirm = 0;
+	hc->dch.state = 0;
+	pci_set_master(hc->pdev);
+	if (!hc->irq) {
+		printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n");
+		return 1;
+	}
+	hc->hw.pci_io = (char *)(ulong)hc->pdev->resource[1].start;
+
+	if (!hc->hw.pci_io) {
+		printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
+		return 1;
+	}
+	/* Allocate memory for FIFOS */
+	/* the memory needs to be on a 32k boundary within the first 4G */
+	pci_set_dma_mask(hc->pdev, 0xFFFF8000);
+	buffer = pci_alloc_consistent(hc->pdev, 0x8000, &hc->hw.dmahandle);
+	/* We silently assume the address is okay if nonzero */
+	if (!buffer) {
+		printk(KERN_WARNING
+		    "HFC-PCI: Error allocating memory for FIFO!\n");
+		return 1;
+	}
+	hc->hw.fifos = buffer;
+	pci_write_config_dword(hc->pdev, 0x80, hc->hw.dmahandle);
+	hc->hw.pci_io = ioremap((ulong) hc->hw.pci_io, 256);
+	printk(KERN_INFO
+		"HFC-PCI: defined at mem %#lx fifo %#lx(%#lx) IRQ %d HZ %d\n",
+		(u_long) hc->hw.pci_io, (u_long) hc->hw.fifos,
+		(u_long) virt_to_bus(hc->hw.fifos),
+		hc->irq, HZ);
+	/* enable memory mapped ports, disable busmaster */
+	pci_write_config_word(hc->pdev, PCI_COMMAND, PCI_ENA_MEMIO);
+	hc->hw.int_m2 = 0;
+	disable_hwirq(hc);
+	hc->hw.int_m1 = 0;
+	Write_hfc(hc, HFCPCI_INT_M1, hc->hw.int_m1);
+	/* At this point the needed PCI config is done */
+	/* fifos are still not enabled */
+	hc->hw.timer.function = (void *) hfcpci_Timer;
+	hc->hw.timer.data = (long) hc;
+	init_timer(&hc->hw.timer);
+	/* default PCM master */
+	test_and_set_bit(HFC_CFG_MASTER, &hc->cfg);
+	return 0;
+}
+
+static void
+release_card(struct hfc_pci *hc) {
+	u_long	flags;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	hc->hw.int_m2 = 0; /* interrupt output off ! */
+	disable_hwirq(hc);
+	mode_hfcpci(&hc->bch[0], 1, ISDN_P_NONE);
+	mode_hfcpci(&hc->bch[1], 2, ISDN_P_NONE);
+	if (hc->dch.timer.function != NULL) {
+		del_timer(&hc->dch.timer);
+		hc->dch.timer.function = NULL;
+	}
+	spin_unlock_irqrestore(&hc->lock, flags);
+	if (hc->hw.protocol == ISDN_P_TE_S0)
+		l1_event(hc->dch.l1, CLOSE_CHANNEL);
+	if (hc->initdone)
+		free_irq(hc->irq, hc);
+	release_io_hfcpci(hc); /* must release after free_irq! */
+	mISDN_unregister_device(&hc->dch.dev);
+	mISDN_freebchannel(&hc->bch[1]);
+	mISDN_freebchannel(&hc->bch[0]);
+	mISDN_freedchannel(&hc->dch);
+	list_del(&hc->list);
+	pci_set_drvdata(hc->pdev, NULL);
+	kfree(hc);
+}
+
+static int
+setup_card(struct hfc_pci *card)
+{
+	int		err = -EINVAL;
+	u_int		i;
+	u_long		flags;
+	char		name[MISDN_MAX_IDLEN];
+
+	if (HFC_cnt >= MAX_CARDS)
+		return -EINVAL; /* maybe better value */
+
+	card->dch.debug = debug;
+	spin_lock_init(&card->lock);
+	mISDN_initdchannel(&card->dch, MAX_DFRAME_LEN_L1, ph_state);
+	card->dch.hw = card;
+	card->dch.dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
+	card->dch.dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	card->dch.dev.D.send = hfcpci_l2l1D;
+	card->dch.dev.D.ctrl = hfc_dctrl;
+	card->dch.dev.nrbchan = 2;
+	for (i = 0; i < 2; i++) {
+		card->bch[i].nr = i + 1;
+		test_and_set_bit(i + 1, &card->dch.dev.channelmap[0]);
+		card->bch[i].debug = debug;
+		mISDN_initbchannel(&card->bch[i], MAX_DATA_MEM);
+		card->bch[i].hw = card;
+		card->bch[i].ch.send = hfcpci_l2l1B;
+		card->bch[i].ch.ctrl = hfc_bctrl;
+		card->bch[i].ch.nr = i + 1;
+		list_add(&card->bch[i].ch.list, &card->dch.dev.bchannels);
+	}
+	err = setup_hw(card);
+	if (err)
+		goto error;
+	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-pci.%d", HFC_cnt + 1);
+	err = mISDN_register_device(&card->dch.dev, name);
+	if (err)
+		goto error;
+	HFC_cnt++;
+	write_lock_irqsave(&HFClock, flags);
+	list_add_tail(&card->list, &HFClist);
+	write_unlock_irqrestore(&HFClock, flags);
+	printk(KERN_INFO "HFC %d cards installed\n", HFC_cnt);
+	return 0;
+error:
+	mISDN_freebchannel(&card->bch[1]);
+	mISDN_freebchannel(&card->bch[0]);
+	mISDN_freedchannel(&card->dch);
+	kfree(card);
+	return err;
+}
+
+/* private data in the PCI devices list */
+struct _hfc_map {
+	u_int	subtype;
+	u_int	flag;
+	char	*name;
+};
+
+static const struct _hfc_map hfc_map[] =
+{
+	{HFC_CCD_2BD0, 0, "CCD/Billion/Asuscom 2BD0"},
+	{HFC_CCD_B000, 0, "Billion B000"},
+	{HFC_CCD_B006, 0, "Billion B006"},
+	{HFC_CCD_B007, 0, "Billion B007"},
+	{HFC_CCD_B008, 0, "Billion B008"},
+	{HFC_CCD_B009, 0, "Billion B009"},
+	{HFC_CCD_B00A, 0, "Billion B00A"},
+	{HFC_CCD_B00B, 0, "Billion B00B"},
+	{HFC_CCD_B00C, 0, "Billion B00C"},
+	{HFC_CCD_B100, 0, "Seyeon B100"},
+	{HFC_CCD_B700, 0, "Primux II S0 B700"},
+	{HFC_CCD_B701, 0, "Primux II S0 NT B701"},
+	{HFC_ABOCOM_2BD1, 0, "Abocom/Magitek 2BD1"},
+	{HFC_ASUS_0675, 0, "Asuscom/Askey 675"},
+	{HFC_BERKOM_TCONCEPT, 0, "German telekom T-Concept"},
+	{HFC_BERKOM_A1T, 0, "German telekom A1T"},
+	{HFC_ANIGMA_MC145575, 0, "Motorola MC145575"},
+	{HFC_ZOLTRIX_2BD0, 0, "Zoltrix 2BD0"},
+	{HFC_DIGI_DF_M_IOM2_E, 0,
+	    "Digi International DataFire Micro V IOM2 (Europe)"},
+	{HFC_DIGI_DF_M_E, 0,
+	    "Digi International DataFire Micro V (Europe)"},
+	{HFC_DIGI_DF_M_IOM2_A, 0,
+	    "Digi International DataFire Micro V IOM2 (North America)"},
+	{HFC_DIGI_DF_M_A, 0,
+	    "Digi International DataFire Micro V (North America)"},
+	{HFC_SITECOM_DC105V2, 0, "Sitecom Connectivity DC-105 ISDN TA"},
+	{},
+};
+
+static struct pci_device_id hfc_ids[] =
+{
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_2BD0,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[0]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B000,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[1]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B006,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[2]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B007,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[3]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B008,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[4]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B009,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[5]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[6]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[7]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[8]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[9]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[10]},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[11]},
+	{PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[12]},
+	{PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[13]},
+	{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[14]},
+	{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_A1T,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[15]},
+	{PCI_VENDOR_ID_ANIGMA, PCI_DEVICE_ID_ANIGMA_MC145575,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[16]},
+	{PCI_VENDOR_ID_ZOLTRIX, PCI_DEVICE_ID_ZOLTRIX_2BD0,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[17]},
+	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_IOM2_E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[18]},
+	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_E,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[19]},
+	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_IOM2_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[20]},
+	{PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_DF_M_A,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[21]},
+	{PCI_VENDOR_ID_SITECOM, PCI_DEVICE_ID_SITECOM_DC105V2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &hfc_map[22]},
+	{},
+};
+
+static int __devinit
+hfc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int		err = -ENOMEM;
+	struct hfc_pci	*card;
+	struct _hfc_map	*m = (struct _hfc_map *)ent->driver_data;
+
+	card = kzalloc(sizeof(struct hfc_pci), GFP_ATOMIC);
+	if (!card) {
+		printk(KERN_ERR "No kmem for HFC card\n");
+		return err;
+	}
+	card->pdev = pdev;
+	card->subtype = m->subtype;
+	err = pci_enable_device(pdev);
+	if (err) {
+		kfree(card);
+		return err;
+	}
+
+	printk(KERN_INFO "mISDN_hfcpci: found adapter %s at %s\n",
+	       m->name, pci_name(pdev));
+
+	card->irq = pdev->irq;
+	pci_set_drvdata(pdev, card);
+	err = setup_card(card);
+	if (err)
+		pci_set_drvdata(pdev, NULL);
+	return err;
+}
+
+static void __devexit
+hfc_remove_pci(struct pci_dev *pdev)
+{
+	struct hfc_pci	*card = pci_get_drvdata(pdev);
+	u_long		flags;
+
+	if (card) {
+		write_lock_irqsave(&HFClock, flags);
+		release_card(card);
+		write_unlock_irqrestore(&HFClock, flags);
+	} else
+		if (debug)
+			printk(KERN_WARNING "%s: drvdata allready removed\n",
+			    __func__);
+}
+
+
+static struct pci_driver hfc_driver = {
+	.name = "hfcpci",
+	.probe = hfc_probe,
+	.remove = __devexit_p(hfc_remove_pci),
+	.id_table = hfc_ids,
+};
+
+static int __init
+HFC_init(void)
+{
+	int		err;
+
+	err = pci_register_driver(&hfc_driver);
+	return err;
+}
+
+static void __exit
+HFC_cleanup(void)
+{
+	struct hfc_pci	*card, *next;
+
+	list_for_each_entry_safe(card, next, &HFClist, list) {
+		release_card(card);
+	}
+	pci_unregister_driver(&hfc_driver);
+}
+
+module_init(HFC_init);
+module_exit(HFC_cleanup);
-- 
cgit v1.2.3


From af69fb3a8ffa37e986db00ed93099dc44babeef4 Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sun, 27 Jul 2008 02:00:43 +0200
Subject: Add mISDN HFC multiport driver

Enable support for cards with Cologne Chip AG's HFC multiport
chip.

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/hardware/mISDN/Kconfig     |   12 +
 drivers/isdn/hardware/mISDN/Makefile    |    1 +
 drivers/isdn/hardware/mISDN/hfc_multi.h | 1204 +++++++
 drivers/isdn/hardware/mISDN/hfcmulti.c  | 5320 +++++++++++++++++++++++++++++++
 include/linux/pci_ids.h                 |   33 +
 5 files changed, 6570 insertions(+)
 create mode 100644 drivers/isdn/hardware/mISDN/hfc_multi.h
 create mode 100644 drivers/isdn/hardware/mISDN/hfcmulti.c

diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index f62dc8752be..14793480c45 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -11,3 +11,15 @@ config MISDN_HFCPCI
 	  Enable support for cards with Cologne Chip AG's
           HFC PCI chip.
 
+config MISDN_HFCMULTI
+	tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
+	depends on PCI
+	depends on MISDN
+	help
+	  Enable support for cards with Cologne Chip AG's HFC multiport
+	  chip. There are three types of chips that are quite similar,
+	  but the interface is different:
+	   * HFC-4S (4 S/T interfaces on one chip)
+	   * HFC-8S (8 S/T interfaces on one chip)
+	   * HFC-E1 (E1 interface for 2Mbit ISDN)
+
diff --git a/drivers/isdn/hardware/mISDN/Makefile b/drivers/isdn/hardware/mISDN/Makefile
index 6f20a40b9d5..1e7ca5332ad 100644
--- a/drivers/isdn/hardware/mISDN/Makefile
+++ b/drivers/isdn/hardware/mISDN/Makefile
@@ -4,3 +4,4 @@
 #
 
 obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
+obj-$(CONFIG_MISDN_HFCMULTI) += hfcmulti.o
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h
new file mode 100644
index 00000000000..a33d87afc84
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfc_multi.h
@@ -0,0 +1,1204 @@
+/*
+ * see notice in hfc_multi.c
+ */
+
+extern void ztdummy_extern_interrupt(void);
+extern void ztdummy_register_interrupt(void);
+extern int ztdummy_unregister_interrupt(void);
+
+#define DEBUG_HFCMULTI_FIFO	0x00010000
+#define	DEBUG_HFCMULTI_CRC	0x00020000
+#define	DEBUG_HFCMULTI_INIT	0x00040000
+#define	DEBUG_HFCMULTI_PLXSD	0x00080000
+#define	DEBUG_HFCMULTI_MODE	0x00100000
+#define	DEBUG_HFCMULTI_MSG	0x00200000
+#define	DEBUG_HFCMULTI_STATE	0x00400000
+#define	DEBUG_HFCMULTI_SYNC	0x01000000
+#define	DEBUG_HFCMULTI_DTMF	0x02000000
+#define	DEBUG_HFCMULTI_LOCK	0x80000000
+
+#define	PCI_ENA_REGIO	0x01
+#define	PCI_ENA_MEMIO	0x02
+
+/*
+ * NOTE: some registers are assigned multiple times due to different modes
+ *       also registers are assigned differen for HFC-4s/8s and HFC-E1
+ */
+
+/*
+#define MAX_FRAME_SIZE	2048
+*/
+
+struct hfc_chan {
+	struct dchannel	*dch;	/* link if channel is a D-channel */
+	struct bchannel	*bch;	/* link if channel is a B-channel */
+	int		port; 	/* the interface port this */
+				/* channel is associated with */
+	int		nt_timer; /* -1 if off, 0 if elapsed, >0 if running */
+	int		los, ais, slip_tx, slip_rx, rdi; /* current alarms */
+	int		jitter;
+	u_long		cfg;	/* port configuration */
+	int		sync;	/* sync state (used by E1) */
+	u_int		protocol; /* current protocol */
+	int		slot_tx; /* current pcm slot */
+	int		bank_tx; /* current pcm bank */
+	int		slot_rx;
+	int		bank_rx;
+	int		conf;	/* conference setting of TX slot */
+	int		txpending;	/* if there is currently data in */
+					/* the FIFO 0=no, 1=yes, 2=splloop */
+	int		rx_off; /* set to turn fifo receive off */
+	int		coeff_count; /* curren coeff block */
+	s32		*coeff; /* memory pointer to 8 coeff blocks */
+};
+
+
+struct hfcm_hw {
+	u_char	r_ctrl;
+	u_char	r_irq_ctrl;
+	u_char	r_cirm;
+	u_char	r_ram_sz;
+	u_char	r_pcm_md0;
+	u_char	r_irqmsk_misc;
+	u_char	r_dtmf;
+	u_char	r_st_sync;
+	u_char	r_sci_msk;
+	u_char	r_tx0, r_tx1;
+	u_char	a_st_ctrl0[8];
+	timer_t	timer;
+};
+
+
+/* for each stack these flags are used (cfg) */
+#define	HFC_CFG_NONCAP_TX	1 /* S/T TX interface has less capacity */
+#define	HFC_CFG_DIS_ECHANNEL	2 /* disable E-channel processing */
+#define	HFC_CFG_REG_ECHANNEL	3 /* register E-channel */
+#define	HFC_CFG_OPTICAL		4 /* the E1 interface is optical */
+#define	HFC_CFG_REPORT_LOS	5 /* the card should report loss of signal */
+#define	HFC_CFG_REPORT_AIS	6 /* the card should report alarm ind. sign. */
+#define	HFC_CFG_REPORT_SLIP	7 /* the card should report bit slips */
+#define	HFC_CFG_REPORT_RDI	8 /* the card should report remote alarm */
+#define	HFC_CFG_DTMF		9 /* enable DTMF-detection */
+#define	HFC_CFG_CRC4		10 /* disable CRC-4 Multiframe mode, */
+					/* use double frame instead. */
+
+#define	HFC_CHIP_EXRAM_128	0 /* external ram 128k */
+#define	HFC_CHIP_EXRAM_512	1 /* external ram 256k */
+#define	HFC_CHIP_REVISION0	2 /* old fifo handling */
+#define	HFC_CHIP_PCM_SLAVE	3 /* PCM is slave */
+#define	HFC_CHIP_PCM_MASTER	4 /* PCM is master */
+#define	HFC_CHIP_RX_SYNC	5 /* disable pll sync for pcm */
+#define	HFC_CHIP_DTMF		6 /* DTMF decoding is enabled */
+#define	HFC_CHIP_ULAW		7 /* ULAW mode */
+#define	HFC_CHIP_CLOCK2		8 /* double clock mode */
+#define	HFC_CHIP_E1CLOCK_GET	9 /* always get clock from E1 interface */
+#define	HFC_CHIP_E1CLOCK_PUT	10 /* always put clock from E1 interface */
+#define	HFC_CHIP_WATCHDOG	11 /* whether we should send signals */
+					/* to the watchdog */
+#define	HFC_CHIP_B410P		12 /* whether we have a b410p with echocan in */
+					/* hw */
+#define	HFC_CHIP_PLXSD		13 /* whether we have a Speech-Design PLX */
+
+#define HFC_IO_MODE_PCIMEM	0x00 /* normal memory mapped IO */
+#define HFC_IO_MODE_REGIO	0x01 /* PCI io access */
+#define HFC_IO_MODE_PLXSD	0x02 /* access HFC via PLX9030 */
+
+/* table entry in the PCI devices list */
+struct hm_map {
+	char *vendor_name;
+	char *card_name;
+	int type;
+	int ports;
+	int clock2;
+	int leds;
+	int opticalsupport;
+	int dip_type;
+	int io_mode;
+};
+
+struct hfc_multi {
+	struct list_head	list;
+	struct hm_map	*mtyp;
+	int		id;
+	int		pcm;	/* id of pcm bus */
+	int		type;
+	int		ports;
+
+	u_int		irq;	/* irq used by card */
+	u_int		irqcnt;
+	struct pci_dev	*pci_dev;
+	int		io_mode; /* selects mode */
+#ifdef HFC_REGISTER_DEBUG
+	void		(*HFC_outb)(struct hfc_multi *hc, u_char reg,
+				u_char val, const char *function, int line);
+	void		(*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
+				u_char val, const char *function, int line);
+	u_char		(*HFC_inb)(struct hfc_multi *hc, u_char reg,
+				const char *function, int line);
+	u_char		(*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg,
+				const char *function, int line);
+	u_short		(*HFC_inw)(struct hfc_multi *hc, u_char reg,
+				const char *function, int line);
+	u_short		(*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg,
+				const char *function, int line);
+	void		(*HFC_wait)(struct hfc_multi *hc,
+				const char *function, int line);
+	void		(*HFC_wait_nodebug)(struct hfc_multi *hc,
+				const char *function, int line);
+#else
+	void		(*HFC_outb)(struct hfc_multi *hc, u_char reg,
+				u_char val);
+	void		(*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
+				u_char val);
+	u_char		(*HFC_inb)(struct hfc_multi *hc, u_char reg);
+	u_char		(*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg);
+	u_short		(*HFC_inw)(struct hfc_multi *hc, u_char reg);
+	u_short		(*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg);
+	void		(*HFC_wait)(struct hfc_multi *hc);
+	void		(*HFC_wait_nodebug)(struct hfc_multi *hc);
+#endif
+	void		(*read_fifo)(struct hfc_multi *hc, u_char *data,
+				int len);
+	void		(*write_fifo)(struct hfc_multi *hc, u_char *data,
+				int len);
+	u_long		pci_origmembase, plx_origmembase, dsp_origmembase;
+	u_char		*pci_membase; /* PCI memory (MUST BE BYTE POINTER) */
+	u_char		*plx_membase; /* PLX memory */
+	u_char		*dsp_membase; /* DSP on PLX */
+	u_long		pci_iobase; /* PCI IO */
+	struct hfcm_hw	hw;	/* remember data of write-only-registers */
+
+	u_long		chip;	/* chip configuration */
+	int		masterclk; /* port that provides master clock -1=off */
+	int		dtmf;	/* flag that dtmf is currently in process */
+	int		Flen;	/* F-buffer size */
+	int		Zlen;	/* Z-buffer size (must be int for calculation)*/
+	int		max_trans; /* maximum transparent fifo fill */
+	int		Zmin;	/* Z-buffer offset */
+	int		DTMFbase; /* base address of DTMF coefficients */
+
+	u_int		slots;	/* number of PCM slots */
+	u_int		leds;	/* type of leds */
+	u_int		ledcount; /* used to animate leds */
+	u_long		ledstate; /* save last state of leds */
+	int		opticalsupport; /* has the e1 board */
+					/* an optical Interface */
+	int		dslot;	/* channel # of d-channel (E1) default 16 */
+
+	u_long		wdcount; 	/* every 500 ms we need to */
+					/* send the watchdog a signal */
+	u_char		wdbyte; /* watchdog toggle byte */
+	u_int		activity[8]; 	/* if there is any action on this */
+					/* port (will be cleared after */
+					/* showing led-states) */
+	int		e1_state; /* keep track of last state */
+	int		e1_getclock; /* if sync is retrieved from interface */
+	int		syncronized; /* keep track of existing sync interface */
+	int		e1_resync; /* resync jobs */
+
+	spinlock_t	lock;	/* the lock */
+
+	/*
+	 * the channel index is counted from 0, regardless where the channel
+	 * is located on the hfc-channel.
+	 * the bch->channel is equvalent to the hfc-channel
+	 */
+	struct hfc_chan	chan[32];
+	u_char		created[8]; /* what port is created */
+	signed char	slot_owner[256]; /* owner channel of slot */
+};
+
+/* PLX GPIOs */
+#define	PLX_GPIO4_DIR_BIT	13
+#define	PLX_GPIO4_BIT		14
+#define	PLX_GPIO5_DIR_BIT	16
+#define	PLX_GPIO5_BIT		17
+#define	PLX_GPIO6_DIR_BIT	19
+#define	PLX_GPIO6_BIT		20
+#define	PLX_GPIO7_DIR_BIT	22
+#define	PLX_GPIO7_BIT		23
+#define PLX_GPIO8_DIR_BIT	25
+#define PLX_GPIO8_BIT		26
+
+#define	PLX_GPIO4		(1 << PLX_GPIO4_BIT)
+#define	PLX_GPIO5		(1 << PLX_GPIO5_BIT)
+#define	PLX_GPIO6		(1 << PLX_GPIO6_BIT)
+#define	PLX_GPIO7		(1 << PLX_GPIO7_BIT)
+#define PLX_GPIO8		(1 << PLX_GPIO8_BIT)
+
+#define	PLX_GPIO4_DIR		(1 << PLX_GPIO4_DIR_BIT)
+#define	PLX_GPIO5_DIR		(1 << PLX_GPIO5_DIR_BIT)
+#define	PLX_GPIO6_DIR		(1 << PLX_GPIO6_DIR_BIT)
+#define	PLX_GPIO7_DIR		(1 << PLX_GPIO7_DIR_BIT)
+#define PLX_GPIO8_DIR		(1 << PLX_GPIO8_DIR_BIT)
+
+#define	PLX_TERM_ON			PLX_GPIO7
+#define	PLX_SLAVE_EN_N		PLX_GPIO5
+#define	PLX_MASTER_EN		PLX_GPIO6
+#define	PLX_SYNC_O_EN		PLX_GPIO4
+#define PLX_DSP_RES_N		PLX_GPIO8
+/* GPIO4..8 Enable & Set to OUT, SLAVE_EN_N = 1 */
+#define PLX_GPIOC_INIT		(PLX_GPIO4_DIR | PLX_GPIO5_DIR | PLX_GPIO6_DIR \
+			| PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N)
+
+/* PLX Interrupt Control/STATUS */
+#define PLX_INTCSR_LINTI1_ENABLE 0x01
+#define PLX_INTCSR_LINTI1_STATUS 0x04
+#define PLX_INTCSR_LINTI2_ENABLE 0x08
+#define PLX_INTCSR_LINTI2_STATUS 0x20
+#define PLX_INTCSR_PCIINT_ENABLE 0x40
+
+/* PLX Registers */
+#define PLX_INTCSR 0x4c
+#define PLX_CNTRL  0x50
+#define PLX_GPIOC  0x54
+
+
+/*
+ * REGISTER SETTING FOR HFC-4S/8S AND HFC-E1
+ */
+
+/* write only registers */
+#define R_CIRM			0x00
+#define R_CTRL			0x01
+#define R_BRG_PCM_CFG 		0x02
+#define R_RAM_ADDR0		0x08
+#define R_RAM_ADDR1		0x09
+#define R_RAM_ADDR2		0x0A
+#define R_FIRST_FIFO		0x0B
+#define R_RAM_SZ		0x0C
+#define R_FIFO_MD		0x0D
+#define R_INC_RES_FIFO		0x0E
+#define R_FSM_IDX		0x0F
+#define R_FIFO			0x0F
+#define R_SLOT			0x10
+#define R_IRQMSK_MISC		0x11
+#define R_SCI_MSK		0x12
+#define R_IRQ_CTRL		0x13
+#define R_PCM_MD0		0x14
+#define R_PCM_MD1		0x15
+#define R_PCM_MD2		0x15
+#define R_SH0H			0x15
+#define R_SH1H			0x15
+#define R_SH0L			0x15
+#define R_SH1L			0x15
+#define R_SL_SEL0		0x15
+#define R_SL_SEL1		0x15
+#define R_SL_SEL2		0x15
+#define R_SL_SEL3		0x15
+#define R_SL_SEL4		0x15
+#define R_SL_SEL5		0x15
+#define R_SL_SEL6		0x15
+#define R_SL_SEL7		0x15
+#define R_ST_SEL		0x16
+#define R_ST_SYNC		0x17
+#define R_CONF_EN		0x18
+#define R_TI_WD			0x1A
+#define R_BERT_WD_MD		0x1B
+#define R_DTMF			0x1C
+#define R_DTMF_N		0x1D
+#define R_E1_WR_STA		0x20
+#define R_E1_RD_STA		0x20
+#define R_LOS0			0x22
+#define R_LOS1			0x23
+#define R_RX0			0x24
+#define R_RX_FR0		0x25
+#define R_RX_FR1		0x26
+#define R_TX0			0x28
+#define R_TX1			0x29
+#define R_TX_FR0		0x2C
+
+#define R_TX_FR1		0x2D
+#define R_TX_FR2		0x2E
+#define R_JATT_ATT		0x2F /* undocumented */
+#define A_ST_RD_STATE		0x30
+#define A_ST_WR_STATE		0x30
+#define R_RX_OFF		0x30
+#define A_ST_CTRL0		0x31
+#define R_SYNC_OUT		0x31
+#define A_ST_CTRL1		0x32
+#define A_ST_CTRL2		0x33
+#define A_ST_SQ_WR		0x34
+#define R_TX_OFF		0x34
+#define R_SYNC_CTRL		0x35
+#define A_ST_CLK_DLY		0x37
+#define R_PWM0			0x38
+#define R_PWM1			0x39
+#define A_ST_B1_TX		0x3C
+#define A_ST_B2_TX		0x3D
+#define A_ST_D_TX		0x3E
+#define R_GPIO_OUT0		0x40
+#define R_GPIO_OUT1		0x41
+#define R_GPIO_EN0		0x42
+#define R_GPIO_EN1		0x43
+#define R_GPIO_SEL		0x44
+#define R_BRG_CTRL		0x45
+#define R_PWM_MD		0x46
+#define R_BRG_MD		0x47
+#define R_BRG_TIM0		0x48
+#define R_BRG_TIM1		0x49
+#define R_BRG_TIM2		0x4A
+#define R_BRG_TIM3		0x4B
+#define R_BRG_TIM_SEL01		0x4C
+#define R_BRG_TIM_SEL23		0x4D
+#define R_BRG_TIM_SEL45		0x4E
+#define R_BRG_TIM_SEL67		0x4F
+#define A_SL_CFG		0xD0
+#define A_CONF			0xD1
+#define A_CH_MSK		0xF4
+#define A_CON_HDLC		0xFA
+#define A_SUBCH_CFG		0xFB
+#define A_CHANNEL		0xFC
+#define A_FIFO_SEQ		0xFD
+#define A_IRQ_MSK		0xFF
+
+/* read only registers */
+#define A_Z12			0x04
+#define A_Z1L			0x04
+#define A_Z1			0x04
+#define A_Z1H			0x05
+#define A_Z2L			0x06
+#define A_Z2			0x06
+#define A_Z2H			0x07
+#define A_F1			0x0C
+#define A_F12			0x0C
+#define A_F2			0x0D
+#define R_IRQ_OVIEW		0x10
+#define R_IRQ_MISC		0x11
+#define R_IRQ_STATECH		0x12
+#define R_CONF_OFLOW		0x14
+#define R_RAM_USE		0x15
+#define R_CHIP_ID		0x16
+#define R_BERT_STA		0x17
+#define R_F0_CNTL		0x18
+#define R_F0_CNTH		0x19
+#define R_BERT_EC		0x1A
+#define R_BERT_ECL		0x1A
+#define R_BERT_ECH		0x1B
+#define R_STATUS		0x1C
+#define R_CHIP_RV		0x1F
+#define R_STATE			0x20
+#define R_SYNC_STA		0x24
+#define R_RX_SL0_0		0x25
+#define R_RX_SL0_1		0x26
+#define R_RX_SL0_2		0x27
+#define R_JATT_DIR		0x2b /* undocumented */
+#define R_SLIP			0x2c
+#define A_ST_RD_STA		0x30
+#define R_FAS_EC		0x30
+#define R_FAS_ECL		0x30
+#define R_FAS_ECH		0x31
+#define R_VIO_EC		0x32
+#define R_VIO_ECL		0x32
+#define R_VIO_ECH		0x33
+#define A_ST_SQ_RD		0x34
+#define R_CRC_EC		0x34
+#define R_CRC_ECL		0x34
+#define R_CRC_ECH		0x35
+#define R_E_EC			0x36
+#define R_E_ECL			0x36
+#define R_E_ECH			0x37
+#define R_SA6_SA13_EC		0x38
+#define R_SA6_SA13_ECL		0x38
+#define R_SA6_SA13_ECH		0x39
+#define R_SA6_SA23_EC		0x3A
+#define R_SA6_SA23_ECL		0x3A
+#define R_SA6_SA23_ECH		0x3B
+#define A_ST_B1_RX		0x3C
+#define A_ST_B2_RX		0x3D
+#define A_ST_D_RX		0x3E
+#define A_ST_E_RX		0x3F
+#define R_GPIO_IN0		0x40
+#define R_GPIO_IN1		0x41
+#define R_GPI_IN0		0x44
+#define R_GPI_IN1		0x45
+#define R_GPI_IN2		0x46
+#define R_GPI_IN3		0x47
+#define R_INT_DATA		0x88
+#define R_IRQ_FIFO_BL0		0xC8
+#define R_IRQ_FIFO_BL1		0xC9
+#define R_IRQ_FIFO_BL2		0xCA
+#define R_IRQ_FIFO_BL3		0xCB
+#define R_IRQ_FIFO_BL4		0xCC
+#define R_IRQ_FIFO_BL5		0xCD
+#define R_IRQ_FIFO_BL6		0xCE
+#define R_IRQ_FIFO_BL7		0xCF
+
+/* read and write registers */
+#define A_FIFO_DATA0		0x80
+#define A_FIFO_DATA1		0x80
+#define A_FIFO_DATA2		0x80
+#define A_FIFO_DATA0_NOINC	0x84
+#define A_FIFO_DATA1_NOINC	0x84
+#define A_FIFO_DATA2_NOINC	0x84
+#define R_RAM_DATA		0xC0
+
+
+/*
+ * BIT SETTING FOR HFC-4S/8S AND HFC-E1
+ */
+
+/* chapter 2: universal bus interface */
+/* R_CIRM */
+#define V_IRQ_SEL		0x01
+#define V_SRES			0x08
+#define V_HFCRES		0x10
+#define V_PCMRES		0x20
+#define V_STRES			0x40
+#define V_ETRES			0x40
+#define V_RLD_EPR		0x80
+/* R_CTRL */
+#define V_FIFO_LPRIO		0x02
+#define V_SLOW_RD		0x04
+#define V_EXT_RAM		0x08
+#define V_CLK_OFF		0x20
+#define V_ST_CLK		0x40
+/* R_RAM_ADDR0 */
+#define V_RAM_ADDR2		0x01
+#define V_ADDR_RES		0x40
+#define V_ADDR_INC		0x80
+/* R_RAM_SZ */
+#define V_RAM_SZ		0x01
+#define V_PWM0_16KHZ		0x10
+#define V_PWM1_16KHZ		0x20
+#define V_FZ_MD			0x80
+/* R_CHIP_ID */
+#define V_PNP_IRQ		0x01
+#define V_CHIP_ID		0x10
+
+/* chapter 3: data flow */
+/* R_FIRST_FIFO */
+#define V_FIRST_FIRO_DIR	0x01
+#define V_FIRST_FIFO_NUM	0x02
+/* R_FIFO_MD */
+#define V_FIFO_MD		0x01
+#define V_CSM_MD		0x04
+#define V_FSM_MD		0x08
+#define V_FIFO_SZ		0x10
+/* R_FIFO */
+#define V_FIFO_DIR		0x01
+#define V_FIFO_NUM		0x02
+#define V_REV			0x80
+/* R_SLOT */
+#define V_SL_DIR		0x01
+#define V_SL_NUM		0x02
+/* A_SL_CFG */
+#define V_CH_DIR		0x01
+#define V_CH_SEL		0x02
+#define V_ROUTING		0x40
+/* A_CON_HDLC */
+#define V_IFF			0x01
+#define V_HDLC_TRP		0x02
+#define V_TRP_IRQ		0x04
+#define V_DATA_FLOW		0x20
+/* A_SUBCH_CFG */
+#define V_BIT_CNT		0x01
+#define V_START_BIT		0x08
+#define V_LOOP_FIFO		0x40
+#define V_INV_DATA		0x80
+/* A_CHANNEL */
+#define V_CH_DIR0		0x01
+#define V_CH_NUM0		0x02
+/* A_FIFO_SEQ */
+#define V_NEXT_FIFO_DIR		0x01
+#define V_NEXT_FIFO_NUM		0x02
+#define V_SEQ_END		0x40
+
+/* chapter 4: FIFO handling and HDLC controller */
+/* R_INC_RES_FIFO */
+#define V_INC_F			0x01
+#define V_RES_F			0x02
+#define V_RES_LOST		0x04
+
+/* chapter 5: S/T interface */
+/* R_SCI_MSK */
+#define V_SCI_MSK_ST0		0x01
+#define V_SCI_MSK_ST1		0x02
+#define V_SCI_MSK_ST2		0x04
+#define V_SCI_MSK_ST3		0x08
+#define V_SCI_MSK_ST4		0x10
+#define V_SCI_MSK_ST5		0x20
+#define V_SCI_MSK_ST6		0x40
+#define V_SCI_MSK_ST7		0x80
+/* R_ST_SEL */
+#define V_ST_SEL		0x01
+#define V_MULT_ST		0x08
+/* R_ST_SYNC */
+#define V_SYNC_SEL		0x01
+#define V_AUTO_SYNC		0x08
+/* A_ST_WR_STA */
+#define V_ST_SET_STA		0x01
+#define V_ST_LD_STA		0x10
+#define V_ST_ACT		0x20
+#define V_SET_G2_G3		0x80
+/* A_ST_CTRL0 */
+#define V_B1_EN			0x01
+#define V_B2_EN			0x02
+#define V_ST_MD			0x04
+#define V_D_PRIO		0x08
+#define V_SQ_EN			0x10
+#define V_96KHZ			0x20
+#define V_TX_LI			0x40
+#define V_ST_STOP		0x80
+/* A_ST_CTRL1 */
+#define V_G2_G3_EN		0x01
+#define V_D_HI			0x04
+#define V_E_IGNO		0x08
+#define V_E_LO			0x10
+#define V_B12_SWAP		0x80
+/* A_ST_CTRL2 */
+#define V_B1_RX_EN		0x01
+#define V_B2_RX_EN		0x02
+#define V_ST_TRIS		0x40
+/* A_ST_CLK_DLY */
+#define V_ST_CK_DLY		0x01
+#define V_ST_SMPL		0x10
+/* A_ST_D_TX */
+#define V_ST_D_TX		0x40
+/* R_IRQ_STATECH */
+#define V_SCI_ST0		0x01
+#define V_SCI_ST1		0x02
+#define V_SCI_ST2		0x04
+#define V_SCI_ST3		0x08
+#define V_SCI_ST4		0x10
+#define V_SCI_ST5		0x20
+#define V_SCI_ST6		0x40
+#define V_SCI_ST7		0x80
+/* A_ST_RD_STA */
+#define V_ST_STA		0x01
+#define V_FR_SYNC_ST		0x10
+#define V_TI2_EXP		0x20
+#define V_INFO0			0x40
+#define V_G2_G3			0x80
+/* A_ST_SQ_RD */
+#define V_ST_SQ			0x01
+#define V_MF_RX_RDY		0x10
+#define V_MF_TX_RDY		0x80
+/* A_ST_D_RX */
+#define V_ST_D_RX		0x40
+/* A_ST_E_RX */
+#define V_ST_E_RX		0x40
+
+/* chapter 5: E1 interface */
+/* R_E1_WR_STA */
+/* R_E1_RD_STA */
+#define V_E1_SET_STA		0x01
+#define V_E1_LD_STA		0x10
+/* R_RX0 */
+#define V_RX_CODE		0x01
+#define V_RX_FBAUD		0x04
+#define V_RX_CMI		0x08
+#define V_RX_INV_CMI		0x10
+#define V_RX_INV_CLK		0x20
+#define V_RX_INV_DATA		0x40
+#define V_AIS_ITU		0x80
+/* R_RX_FR0 */
+#define V_NO_INSYNC		0x01
+#define V_AUTO_RESYNC		0x02
+#define V_AUTO_RECO		0x04
+#define V_SWORD_COND		0x08
+#define V_SYNC_LOSS		0x10
+#define V_XCRC_SYNC		0x20
+#define V_MF_RESYNC		0x40
+#define V_RESYNC		0x80
+/* R_RX_FR1 */
+#define V_RX_MF			0x01
+#define V_RX_MF_SYNC		0x02
+#define V_RX_SL0_RAM		0x04
+#define V_ERR_SIM		0x20
+#define V_RES_NMF		0x40
+/* R_TX0 */
+#define V_TX_CODE		0x01
+#define V_TX_FBAUD		0x04
+#define V_TX_CMI_CODE		0x08
+#define V_TX_INV_CMI_CODE	0x10
+#define V_TX_INV_CLK		0x20
+#define V_TX_INV_DATA		0x40
+#define V_OUT_EN		0x80
+/* R_TX1 */
+#define V_INV_CLK		0x01
+#define V_EXCHG_DATA_LI		0x02
+#define V_AIS_OUT		0x04
+#define V_ATX			0x20
+#define V_NTRI			0x40
+#define V_AUTO_ERR_RES		0x80
+/* R_TX_FR0 */
+#define V_TRP_FAS		0x01
+#define V_TRP_NFAS		0x02
+#define V_TRP_RAL		0x04
+#define V_TRP_SA		0x08
+/* R_TX_FR1 */
+#define V_TX_FAS		0x01
+#define V_TX_NFAS		0x02
+#define V_TX_RAL		0x04
+#define V_TX_SA			0x08
+/* R_TX_FR2 */
+#define V_TX_MF			0x01
+#define V_TRP_SL0		0x02
+#define V_TX_SL0_RAM		0x04
+#define V_TX_E			0x10
+#define V_NEG_E			0x20
+#define V_XS12_ON		0x40
+#define V_XS15_ON		0x80
+/* R_RX_OFF */
+#define V_RX_SZ			0x01
+#define V_RX_INIT		0x04
+/* R_SYNC_OUT */
+#define V_SYNC_E1_RX		0x01
+#define V_IPATS0		0x20
+#define V_IPATS1		0x40
+#define V_IPATS2		0x80
+/* R_TX_OFF */
+#define V_TX_SZ			0x01
+#define V_TX_INIT		0x04
+/* R_SYNC_CTRL */
+#define V_EXT_CLK_SYNC		0x01
+#define V_SYNC_OFFS		0x02
+#define V_PCM_SYNC		0x04
+#define V_NEG_CLK		0x08
+#define V_HCLK			0x10
+/*
+#define V_JATT_AUTO_DEL		0x20
+#define V_JATT_AUTO		0x40
+*/
+#define V_JATT_OFF		0x80
+/* R_STATE */
+#define V_E1_STA		0x01
+#define V_ALT_FR_RX		0x40
+#define V_ALT_FR_TX		0x80
+/* R_SYNC_STA */
+#define V_RX_STA		0x01
+#define V_FR_SYNC_E1		0x04
+#define V_SIG_LOS		0x08
+#define V_MFA_STA		0x10
+#define V_AIS			0x40
+#define V_NO_MF_SYNC		0x80
+/* R_RX_SL0_0 */
+#define V_SI_FAS		0x01
+#define V_SI_NFAS		0x02
+#define V_A			0x04
+#define V_CRC_OK		0x08
+#define V_TX_E1			0x10
+#define V_TX_E2			0x20
+#define V_RX_E1			0x40
+#define V_RX_E2			0x80
+/* R_SLIP */
+#define V_SLIP_RX		0x01
+#define V_FOSLIP_RX		0x08
+#define V_SLIP_TX		0x10
+#define V_FOSLIP_TX		0x80
+
+/* chapter 6: PCM interface */
+/* R_PCM_MD0 */
+#define V_PCM_MD		0x01
+#define V_C4_POL		0x02
+#define V_F0_NEG		0x04
+#define V_F0_LEN		0x08
+#define V_PCM_ADDR		0x10
+/* R_SL_SEL0 */
+#define V_SL_SEL0		0x01
+#define V_SH_SEL0		0x80
+/* R_SL_SEL1 */
+#define V_SL_SEL1		0x01
+#define V_SH_SEL1		0x80
+/* R_SL_SEL2 */
+#define V_SL_SEL2		0x01
+#define V_SH_SEL2		0x80
+/* R_SL_SEL3 */
+#define V_SL_SEL3		0x01
+#define V_SH_SEL3		0x80
+/* R_SL_SEL4 */
+#define V_SL_SEL4		0x01
+#define V_SH_SEL4		0x80
+/* R_SL_SEL5 */
+#define V_SL_SEL5		0x01
+#define V_SH_SEL5		0x80
+/* R_SL_SEL6 */
+#define V_SL_SEL6		0x01
+#define V_SH_SEL6		0x80
+/* R_SL_SEL7 */
+#define V_SL_SEL7		0x01
+#define V_SH_SEL7		0x80
+/* R_PCM_MD1 */
+#define V_ODEC_CON		0x01
+#define V_PLL_ADJ		0x04
+#define V_PCM_DR		0x10
+#define V_PCM_LOOP		0x40
+/* R_PCM_MD2 */
+#define V_SYNC_PLL		0x02
+#define V_SYNC_SRC		0x04
+#define V_SYNC_OUT		0x08
+#define V_ICR_FR_TIME		0x40
+#define V_EN_PLL		0x80
+
+/* chapter 7: pulse width modulation */
+/* R_PWM_MD */
+#define V_EXT_IRQ_EN		0x08
+#define V_PWM0_MD		0x10
+#define V_PWM1_MD		0x40
+
+/* chapter 8: multiparty audio conferences */
+/* R_CONF_EN */
+#define V_CONF_EN		0x01
+#define V_ULAW			0x80
+/* A_CONF */
+#define V_CONF_NUM		0x01
+#define V_NOISE_SUPPR		0x08
+#define V_ATT_LEV		0x20
+#define V_CONF_SL		0x80
+/* R_CONF_OFLOW */
+#define V_CONF_OFLOW0		0x01
+#define V_CONF_OFLOW1		0x02
+#define V_CONF_OFLOW2		0x04
+#define V_CONF_OFLOW3		0x08
+#define V_CONF_OFLOW4		0x10
+#define V_CONF_OFLOW5		0x20
+#define V_CONF_OFLOW6		0x40
+#define V_CONF_OFLOW7		0x80
+
+/* chapter 9: DTMF contoller */
+/* R_DTMF0 */
+#define V_DTMF_EN		0x01
+#define V_HARM_SEL		0x02
+#define V_DTMF_RX_CH		0x04
+#define V_DTMF_STOP		0x08
+#define V_CHBL_SEL		0x10
+#define V_RST_DTMF		0x40
+#define V_ULAW_SEL		0x80
+
+/* chapter 10: BERT */
+/* R_BERT_WD_MD */
+#define V_PAT_SEQ		0x01
+#define V_BERT_ERR		0x08
+#define V_AUTO_WD_RES		0x20
+#define V_WD_RES		0x80
+/* R_BERT_STA */
+#define V_BERT_SYNC_SRC		0x01
+#define V_BERT_SYNC		0x10
+#define V_BERT_INV_DATA		0x20
+
+/* chapter 11: auxiliary interface */
+/* R_BRG_PCM_CFG */
+#define V_BRG_EN		0x01
+#define V_BRG_MD		0x02
+#define V_PCM_CLK		0x20
+#define V_ADDR_WRDLY		0x40
+/* R_BRG_CTRL */
+#define V_BRG_CS		0x01
+#define V_BRG_ADDR		0x08
+#define V_BRG_CS_SRC		0x80
+/* R_BRG_MD */
+#define V_BRG_MD0		0x01
+#define V_BRG_MD1		0x02
+#define V_BRG_MD2		0x04
+#define V_BRG_MD3		0x08
+#define V_BRG_MD4		0x10
+#define V_BRG_MD5		0x20
+#define V_BRG_MD6		0x40
+#define V_BRG_MD7		0x80
+/* R_BRG_TIM0 */
+#define V_BRG_TIM0_IDLE		0x01
+#define V_BRG_TIM0_CLK		0x10
+/* R_BRG_TIM1 */
+#define V_BRG_TIM1_IDLE		0x01
+#define V_BRG_TIM1_CLK		0x10
+/* R_BRG_TIM2 */
+#define V_BRG_TIM2_IDLE		0x01
+#define V_BRG_TIM2_CLK		0x10
+/* R_BRG_TIM3 */
+#define V_BRG_TIM3_IDLE		0x01
+#define V_BRG_TIM3_CLK		0x10
+/* R_BRG_TIM_SEL01 */
+#define V_BRG_WR_SEL0		0x01
+#define V_BRG_RD_SEL0		0x04
+#define V_BRG_WR_SEL1		0x10
+#define V_BRG_RD_SEL1		0x40
+/* R_BRG_TIM_SEL23 */
+#define V_BRG_WR_SEL2		0x01
+#define V_BRG_RD_SEL2		0x04
+#define V_BRG_WR_SEL3		0x10
+#define V_BRG_RD_SEL3		0x40
+/* R_BRG_TIM_SEL45 */
+#define V_BRG_WR_SEL4		0x01
+#define V_BRG_RD_SEL4		0x04
+#define V_BRG_WR_SEL5		0x10
+#define V_BRG_RD_SEL5		0x40
+/* R_BRG_TIM_SEL67 */
+#define V_BRG_WR_SEL6		0x01
+#define V_BRG_RD_SEL6		0x04
+#define V_BRG_WR_SEL7		0x10
+#define V_BRG_RD_SEL7		0x40
+
+/* chapter 12: clock, reset, interrupt, timer and watchdog */
+/* R_IRQMSK_MISC */
+#define V_STA_IRQMSK		0x01
+#define V_TI_IRQMSK		0x02
+#define V_PROC_IRQMSK		0x04
+#define V_DTMF_IRQMSK		0x08
+#define V_IRQ1S_MSK		0x10
+#define V_SA6_IRQMSK		0x20
+#define V_RX_EOMF_MSK		0x40
+#define V_TX_EOMF_MSK		0x80
+/* R_IRQ_CTRL */
+#define V_FIFO_IRQ		0x01
+#define V_GLOB_IRQ_EN		0x08
+#define V_IRQ_POL		0x10
+/* R_TI_WD */
+#define V_EV_TS			0x01
+#define V_WD_TS			0x10
+/* A_IRQ_MSK */
+#define V_IRQ			0x01
+#define V_BERT_EN		0x02
+#define V_MIX_IRQ		0x04
+/* R_IRQ_OVIEW */
+#define V_IRQ_FIFO_BL0		0x01
+#define V_IRQ_FIFO_BL1		0x02
+#define V_IRQ_FIFO_BL2		0x04
+#define V_IRQ_FIFO_BL3		0x08
+#define V_IRQ_FIFO_BL4		0x10
+#define V_IRQ_FIFO_BL5		0x20
+#define V_IRQ_FIFO_BL6		0x40
+#define V_IRQ_FIFO_BL7		0x80
+/* R_IRQ_MISC */
+#define V_STA_IRQ		0x01
+#define V_TI_IRQ		0x02
+#define V_IRQ_PROC		0x04
+#define V_DTMF_IRQ		0x08
+#define V_IRQ1S			0x10
+#define V_SA6_IRQ		0x20
+#define V_RX_EOMF		0x40
+#define V_TX_EOMF		0x80
+/* R_STATUS */
+#define V_BUSY			0x01
+#define V_PROC			0x02
+#define V_DTMF_STA		0x04
+#define V_LOST_STA		0x08
+#define V_SYNC_IN		0x10
+#define V_EXT_IRQSTA		0x20
+#define V_MISC_IRQSTA		0x40
+#define V_FR_IRQSTA		0x80
+/* R_IRQ_FIFO_BL0 */
+#define V_IRQ_FIFO0_TX		0x01
+#define V_IRQ_FIFO0_RX		0x02
+#define V_IRQ_FIFO1_TX		0x04
+#define V_IRQ_FIFO1_RX		0x08
+#define V_IRQ_FIFO2_TX		0x10
+#define V_IRQ_FIFO2_RX		0x20
+#define V_IRQ_FIFO3_TX		0x40
+#define V_IRQ_FIFO3_RX		0x80
+/* R_IRQ_FIFO_BL1 */
+#define V_IRQ_FIFO4_TX		0x01
+#define V_IRQ_FIFO4_RX		0x02
+#define V_IRQ_FIFO5_TX		0x04
+#define V_IRQ_FIFO5_RX		0x08
+#define V_IRQ_FIFO6_TX		0x10
+#define V_IRQ_FIFO6_RX		0x20
+#define V_IRQ_FIFO7_TX		0x40
+#define V_IRQ_FIFO7_RX		0x80
+/* R_IRQ_FIFO_BL2 */
+#define V_IRQ_FIFO8_TX		0x01
+#define V_IRQ_FIFO8_RX		0x02
+#define V_IRQ_FIFO9_TX		0x04
+#define V_IRQ_FIFO9_RX		0x08
+#define V_IRQ_FIFO10_TX		0x10
+#define V_IRQ_FIFO10_RX		0x20
+#define V_IRQ_FIFO11_TX		0x40
+#define V_IRQ_FIFO11_RX		0x80
+/* R_IRQ_FIFO_BL3 */
+#define V_IRQ_FIFO12_TX		0x01
+#define V_IRQ_FIFO12_RX		0x02
+#define V_IRQ_FIFO13_TX		0x04
+#define V_IRQ_FIFO13_RX		0x08
+#define V_IRQ_FIFO14_TX		0x10
+#define V_IRQ_FIFO14_RX		0x20
+#define V_IRQ_FIFO15_TX		0x40
+#define V_IRQ_FIFO15_RX		0x80
+/* R_IRQ_FIFO_BL4 */
+#define V_IRQ_FIFO16_TX		0x01
+#define V_IRQ_FIFO16_RX		0x02
+#define V_IRQ_FIFO17_TX		0x04
+#define V_IRQ_FIFO17_RX		0x08
+#define V_IRQ_FIFO18_TX		0x10
+#define V_IRQ_FIFO18_RX		0x20
+#define V_IRQ_FIFO19_TX		0x40
+#define V_IRQ_FIFO19_RX		0x80
+/* R_IRQ_FIFO_BL5 */
+#define V_IRQ_FIFO20_TX		0x01
+#define V_IRQ_FIFO20_RX		0x02
+#define V_IRQ_FIFO21_TX		0x04
+#define V_IRQ_FIFO21_RX		0x08
+#define V_IRQ_FIFO22_TX		0x10
+#define V_IRQ_FIFO22_RX		0x20
+#define V_IRQ_FIFO23_TX		0x40
+#define V_IRQ_FIFO23_RX		0x80
+/* R_IRQ_FIFO_BL6 */
+#define V_IRQ_FIFO24_TX		0x01
+#define V_IRQ_FIFO24_RX		0x02
+#define V_IRQ_FIFO25_TX		0x04
+#define V_IRQ_FIFO25_RX		0x08
+#define V_IRQ_FIFO26_TX		0x10
+#define V_IRQ_FIFO26_RX		0x20
+#define V_IRQ_FIFO27_TX		0x40
+#define V_IRQ_FIFO27_RX		0x80
+/* R_IRQ_FIFO_BL7 */
+#define V_IRQ_FIFO28_TX		0x01
+#define V_IRQ_FIFO28_RX		0x02
+#define V_IRQ_FIFO29_TX		0x04
+#define V_IRQ_FIFO29_RX		0x08
+#define V_IRQ_FIFO30_TX		0x10
+#define V_IRQ_FIFO30_RX		0x20
+#define V_IRQ_FIFO31_TX		0x40
+#define V_IRQ_FIFO31_RX		0x80
+
+/* chapter 13: general purpose I/O pins (GPIO) and input pins (GPI) */
+/* R_GPIO_OUT0 */
+#define V_GPIO_OUT0		0x01
+#define V_GPIO_OUT1		0x02
+#define V_GPIO_OUT2		0x04
+#define V_GPIO_OUT3		0x08
+#define V_GPIO_OUT4		0x10
+#define V_GPIO_OUT5		0x20
+#define V_GPIO_OUT6		0x40
+#define V_GPIO_OUT7		0x80
+/* R_GPIO_OUT1 */
+#define V_GPIO_OUT8		0x01
+#define V_GPIO_OUT9		0x02
+#define V_GPIO_OUT10		0x04
+#define V_GPIO_OUT11		0x08
+#define V_GPIO_OUT12		0x10
+#define V_GPIO_OUT13		0x20
+#define V_GPIO_OUT14		0x40
+#define V_GPIO_OUT15		0x80
+/* R_GPIO_EN0 */
+#define V_GPIO_EN0		0x01
+#define V_GPIO_EN1		0x02
+#define V_GPIO_EN2		0x04
+#define V_GPIO_EN3		0x08
+#define V_GPIO_EN4		0x10
+#define V_GPIO_EN5		0x20
+#define V_GPIO_EN6		0x40
+#define V_GPIO_EN7		0x80
+/* R_GPIO_EN1 */
+#define V_GPIO_EN8		0x01
+#define V_GPIO_EN9		0x02
+#define V_GPIO_EN10		0x04
+#define V_GPIO_EN11		0x08
+#define V_GPIO_EN12		0x10
+#define V_GPIO_EN13		0x20
+#define V_GPIO_EN14		0x40
+#define V_GPIO_EN15		0x80
+/* R_GPIO_SEL */
+#define V_GPIO_SEL0		0x01
+#define V_GPIO_SEL1		0x02
+#define V_GPIO_SEL2		0x04
+#define V_GPIO_SEL3		0x08
+#define V_GPIO_SEL4		0x10
+#define V_GPIO_SEL5		0x20
+#define V_GPIO_SEL6		0x40
+#define V_GPIO_SEL7		0x80
+/* R_GPIO_IN0 */
+#define V_GPIO_IN0		0x01
+#define V_GPIO_IN1		0x02
+#define V_GPIO_IN2		0x04
+#define V_GPIO_IN3		0x08
+#define V_GPIO_IN4		0x10
+#define V_GPIO_IN5		0x20
+#define V_GPIO_IN6		0x40
+#define V_GPIO_IN7		0x80
+/* R_GPIO_IN1 */
+#define V_GPIO_IN8		0x01
+#define V_GPIO_IN9		0x02
+#define V_GPIO_IN10		0x04
+#define V_GPIO_IN11		0x08
+#define V_GPIO_IN12		0x10
+#define V_GPIO_IN13		0x20
+#define V_GPIO_IN14		0x40
+#define V_GPIO_IN15		0x80
+/* R_GPI_IN0 */
+#define V_GPI_IN0		0x01
+#define V_GPI_IN1		0x02
+#define V_GPI_IN2		0x04
+#define V_GPI_IN3		0x08
+#define V_GPI_IN4		0x10
+#define V_GPI_IN5		0x20
+#define V_GPI_IN6		0x40
+#define V_GPI_IN7		0x80
+/* R_GPI_IN1 */
+#define V_GPI_IN8		0x01
+#define V_GPI_IN9		0x02
+#define V_GPI_IN10		0x04
+#define V_GPI_IN11		0x08
+#define V_GPI_IN12		0x10
+#define V_GPI_IN13		0x20
+#define V_GPI_IN14		0x40
+#define V_GPI_IN15		0x80
+/* R_GPI_IN2 */
+#define V_GPI_IN16		0x01
+#define V_GPI_IN17		0x02
+#define V_GPI_IN18		0x04
+#define V_GPI_IN19		0x08
+#define V_GPI_IN20		0x10
+#define V_GPI_IN21		0x20
+#define V_GPI_IN22		0x40
+#define V_GPI_IN23		0x80
+/* R_GPI_IN3 */
+#define V_GPI_IN24		0x01
+#define V_GPI_IN25		0x02
+#define V_GPI_IN26		0x04
+#define V_GPI_IN27		0x08
+#define V_GPI_IN28		0x10
+#define V_GPI_IN29		0x20
+#define V_GPI_IN30		0x40
+#define V_GPI_IN31		0x80
+
+/* map of all registers, used for debugging */
+
+#ifdef HFC_REGISTER_DEBUG
+struct hfc_register_names {
+	char *name;
+	u_char reg;
+} hfc_register_names[] = {
+	/* write registers */
+	{"R_CIRM",		0x00},
+	{"R_CTRL",		0x01},
+	{"R_BRG_PCM_CFG ",	0x02},
+	{"R_RAM_ADDR0",		0x08},
+	{"R_RAM_ADDR1",		0x09},
+	{"R_RAM_ADDR2",		0x0A},
+	{"R_FIRST_FIFO",	0x0B},
+	{"R_RAM_SZ",		0x0C},
+	{"R_FIFO_MD",		0x0D},
+	{"R_INC_RES_FIFO",	0x0E},
+	{"R_FIFO / R_FSM_IDX",	0x0F},
+	{"R_SLOT",		0x10},
+	{"R_IRQMSK_MISC",	0x11},
+	{"R_SCI_MSK",		0x12},
+	{"R_IRQ_CTRL",		0x13},
+	{"R_PCM_MD0",		0x14},
+	{"R_0x15",		0x15},
+	{"R_ST_SEL",		0x16},
+	{"R_ST_SYNC",		0x17},
+	{"R_CONF_EN",		0x18},
+	{"R_TI_WD",		0x1A},
+	{"R_BERT_WD_MD",	0x1B},
+	{"R_DTMF",		0x1C},
+	{"R_DTMF_N",		0x1D},
+	{"R_E1_XX_STA",		0x20},
+	{"R_LOS0",		0x22},
+	{"R_LOS1",		0x23},
+	{"R_RX0",		0x24},
+	{"R_RX_FR0",		0x25},
+	{"R_RX_FR1",		0x26},
+	{"R_TX0",		0x28},
+	{"R_TX1",		0x29},
+	{"R_TX_FR0",		0x2C},
+	{"R_TX_FR1",		0x2D},
+	{"R_TX_FR2",		0x2E},
+	{"R_JATT_ATT",		0x2F},
+	{"A_ST_xx_STA/R_RX_OFF", 0x30},
+	{"A_ST_CTRL0/R_SYNC_OUT", 0x31},
+	{"A_ST_CTRL1",		0x32},
+	{"A_ST_CTRL2",		0x33},
+	{"A_ST_SQ_WR",		0x34},
+	{"R_TX_OFF",		0x34},
+	{"R_SYNC_CTRL",		0x35},
+	{"A_ST_CLK_DLY",	0x37},
+	{"R_PWM0",		0x38},
+	{"R_PWM1",		0x39},
+	{"A_ST_B1_TX",		0x3C},
+	{"A_ST_B2_TX",		0x3D},
+	{"A_ST_D_TX",		0x3E},
+	{"R_GPIO_OUT0",		0x40},
+	{"R_GPIO_OUT1",		0x41},
+	{"R_GPIO_EN0",		0x42},
+	{"R_GPIO_EN1",		0x43},
+	{"R_GPIO_SEL",		0x44},
+	{"R_BRG_CTRL",		0x45},
+	{"R_PWM_MD",		0x46},
+	{"R_BRG_MD",		0x47},
+	{"R_BRG_TIM0",		0x48},
+	{"R_BRG_TIM1",		0x49},
+	{"R_BRG_TIM2",		0x4A},
+	{"R_BRG_TIM3",		0x4B},
+	{"R_BRG_TIM_SEL01",	0x4C},
+	{"R_BRG_TIM_SEL23",	0x4D},
+	{"R_BRG_TIM_SEL45",	0x4E},
+	{"R_BRG_TIM_SEL67",	0x4F},
+	{"A_FIFO_DATA0-2",	0x80},
+	{"A_FIFO_DATA0-2_NOINC", 0x84},
+	{"R_RAM_DATA",		0xC0},
+	{"A_SL_CFG",		0xD0},
+	{"A_CONF",		0xD1},
+	{"A_CH_MSK",		0xF4},
+	{"A_CON_HDLC",		0xFA},
+	{"A_SUBCH_CFG",		0xFB},
+	{"A_CHANNEL",		0xFC},
+	{"A_FIFO_SEQ",		0xFD},
+	{"A_IRQ_MSK",		0xFF},
+	{NULL, 0},
+
+	/* read registers */
+	{"A_Z1",		0x04},
+	{"A_Z1H",		0x05},
+	{"A_Z2",		0x06},
+	{"A_Z2H",		0x07},
+	{"A_F1",		0x0C},
+	{"A_F2",		0x0D},
+	{"R_IRQ_OVIEW",		0x10},
+	{"R_IRQ_MISC",		0x11},
+	{"R_IRQ_STATECH",	0x12},
+	{"R_CONF_OFLOW",	0x14},
+	{"R_RAM_USE",		0x15},
+	{"R_CHIP_ID",		0x16},
+	{"R_BERT_STA",		0x17},
+	{"R_F0_CNTL",		0x18},
+	{"R_F0_CNTH",		0x19},
+	{"R_BERT_ECL",		0x1A},
+	{"R_BERT_ECH",		0x1B},
+	{"R_STATUS",		0x1C},
+	{"R_CHIP_RV",		0x1F},
+	{"R_STATE",		0x20},
+	{"R_SYNC_STA",		0x24},
+	{"R_RX_SL0_0",		0x25},
+	{"R_RX_SL0_1",		0x26},
+	{"R_RX_SL0_2",		0x27},
+	{"R_JATT_DIR",		0x2b},
+	{"R_SLIP",		0x2c},
+	{"A_ST_RD_STA",		0x30},
+	{"R_FAS_ECL",		0x30},
+	{"R_FAS_ECH",		0x31},
+	{"R_VIO_ECL",		0x32},
+	{"R_VIO_ECH",		0x33},
+	{"R_CRC_ECL / A_ST_SQ_RD", 0x34},
+	{"R_CRC_ECH",		0x35},
+	{"R_E_ECL",		0x36},
+	{"R_E_ECH",		0x37},
+	{"R_SA6_SA13_ECL",	0x38},
+	{"R_SA6_SA13_ECH",	0x39},
+	{"R_SA6_SA23_ECL",	0x3A},
+	{"R_SA6_SA23_ECH",	0x3B},
+	{"A_ST_B1_RX",		0x3C},
+	{"A_ST_B2_RX",		0x3D},
+	{"A_ST_D_RX",		0x3E},
+	{"A_ST_E_RX",		0x3F},
+	{"R_GPIO_IN0",		0x40},
+	{"R_GPIO_IN1",		0x41},
+	{"R_GPI_IN0",		0x44},
+	{"R_GPI_IN1",		0x45},
+	{"R_GPI_IN2",		0x46},
+	{"R_GPI_IN3",		0x47},
+	{"A_FIFO_DATA0-2",	0x80},
+	{"A_FIFO_DATA0-2_NOINC", 0x84},
+	{"R_INT_DATA",		0x88},
+	{"R_RAM_DATA",		0xC0},
+	{"R_IRQ_FIFO_BL0",	0xC8},
+	{"R_IRQ_FIFO_BL1",	0xC9},
+	{"R_IRQ_FIFO_BL2",	0xCA},
+	{"R_IRQ_FIFO_BL3",	0xCB},
+	{"R_IRQ_FIFO_BL4",	0xCC},
+	{"R_IRQ_FIFO_BL5",	0xCD},
+	{"R_IRQ_FIFO_BL6",	0xCE},
+	{"R_IRQ_FIFO_BL7",	0xCF},
+};
+#endif /* HFC_REGISTER_DEBUG */
+
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
new file mode 100644
index 00000000000..2649ea55a9e
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -0,0 +1,5320 @@
+/*
+ * hfcmulti.c  low level driver for hfc-4s/hfc-8s/hfc-e1 based cards
+ *
+ * Author	Andreas Eversberg (jolly@eversberg.eu)
+ * ported to mqueue mechanism:
+ *		Peter Sprenger (sprengermoving-bytes.de)
+ *
+ * inspired by existing hfc-pci driver:
+ * Copyright 1999  by Werner Cornelius (werner@isdn-development.de)
+ * Copyright 2008  by Karsten Keil (kkeil@suse.de)
+ * Copyright 2008  by Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * Thanks to Cologne Chip AG for this great controller!
+ */
+
+/*
+ * module parameters:
+ * type:
+ *	By default (0), the card is automatically detected.
+ *	Or use the following combinations:
+ *	Bit 0-7   = 0x00001 = HFC-E1 (1 port)
+ * or	Bit 0-7   = 0x00004 = HFC-4S (4 ports)
+ * or	Bit 0-7   = 0x00008 = HFC-8S (8 ports)
+ *	Bit 8     = 0x00100 = uLaw (instead of aLaw)
+ *	Bit 9     = 0x00200 = Disable DTMF detect on all B-channels via hardware
+ *	Bit 10    = spare
+ *	Bit 11    = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
+ * or   Bit 12    = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
+ *	Bit 13	  = spare
+ *	Bit 14    = 0x04000 = Use external ram (128K)
+ *	Bit 15    = 0x08000 = Use external ram (512K)
+ *	Bit 16    = 0x10000 = Use 64 timeslots instead of 32
+ * or	Bit 17    = 0x20000 = Use 128 timeslots instead of anything else
+ *	Bit 18    = spare
+ *	Bit 19    = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog)
+ * (all other bits are reserved and shall be 0)
+ *	example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM
+ *		 bus (PCM master)
+ *
+ * port: (optional or required for all ports on all installed cards)
+ *	HFC-4S/HFC-8S only bits:
+ *	Bit 0	  = 0x001 = Use master clock for this S/T interface
+ *			    (ony once per chip).
+ *	Bit 1     = 0x002 = transmitter line setup (non capacitive mode)
+ *			    Don't use this unless you know what you are doing!
+ *	Bit 2     = 0x004 = Disable E-channel. (No E-channel processing)
+ *	example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock
+ *		 received from port 1
+ *
+ *	HFC-E1 only bits:
+ *	Bit 0     = 0x0001 = interface: 0=copper, 1=optical
+ *	Bit 1     = 0x0002 = reserved (later for 32 B-channels transparent mode)
+ *	Bit 2     = 0x0004 = Report LOS
+ *	Bit 3     = 0x0008 = Report AIS
+ *	Bit 4     = 0x0010 = Report SLIP
+ *	Bit 5     = 0x0020 = Report RDI
+ *	Bit 8     = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame
+ *			     mode instead.
+ *	Bit 9	  = 0x0200 = Force get clock from interface, even in NT mode.
+ * or	Bit 10	  = 0x0400 = Force put clock to interface, even in TE mode.
+ *	Bit 11    = 0x0800 = Use direct RX clock for PCM sync rather than PLL.
+ *			     (E1 only)
+ *	Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0
+ *			     for default.
+ * (all other bits are reserved and shall be 0)
+ *
+ * debug:
+ *	NOTE: only one debug value must be given for all cards
+ *	enable debugging (see hfc_multi.h for debug options)
+ *
+ * poll:
+ *	NOTE: only one poll value must be given for all cards
+ *	Give the number of samples for each fifo process.
+ *	By default 128 is used. Decrease to reduce delay, increase to
+ *	reduce cpu load. If unsure, don't mess with it!
+ *	Valid is 8, 16, 32, 64, 128, 256.
+ *
+ * pcm:
+ *	NOTE: only one pcm value must be given for every card.
+ *	The PCM bus id tells the mISDNdsp module about the connected PCM bus.
+ *	By default (0), the PCM bus id is 100 for the card that is PCM master.
+ *	If multiple cards are PCM master (because they are not interconnected),
+ *	each card with PCM master will have increasing PCM id.
+ *	All PCM busses with the same ID are expected to be connected and have
+ *	common time slots slots.
+ *	Only one chip of the PCM bus must be master, the others slave.
+ *	-1 means no support of PCM bus not even.
+ *	Omit this value, if all cards are interconnected or none is connected.
+ *	If unsure, don't give this parameter.
+ *
+ * dslot:
+ *	NOTE: only one poll value must be given for every card.
+ *	Also this value must be given for non-E1 cards. If omitted, the E1
+ *	card has D-channel on time slot 16, which is default.
+ *	If 1..15 or 17..31, an alternate time slot is used for D-channel.
+ *	In this case, the application must be able to handle this.
+ *	If -1 is given, the D-channel is disabled and all 31 slots can be used
+ *	for B-channel. (only for specific applications)
+ *	If you don't know how to use it, you don't need it!
+ *
+ * iomode:
+ *	NOTE: only one mode value must be given for every card.
+ *	-> See hfc_multi.h for HFC_IO_MODE_* values
+ *	By default, the IO mode is pci memory IO (MEMIO).
+ *	Some cards requre specific IO mode, so it cannot be changed.
+ *	It may be usefull to set IO mode to register io (REGIO) to solve
+ *	PCI bridge problems.
+ *	If unsure, don't give this parameter.
+ *
+ * clockdelay_nt:
+ *	NOTE: only one clockdelay_nt value must be given once for all cards.
+ *	Give the value of the clock control register (A_ST_CLK_DLY)
+ *	of the S/T interfaces in NT mode.
+ *	This register is needed for the TBR3 certification, so don't change it.
+ *
+ * clockdelay_te:
+ *	NOTE: only one clockdelay_te value must be given once
+ *	Give the value of the clock control register (A_ST_CLK_DLY)
+ *	of the S/T interfaces in TE mode.
+ *	This register is needed for the TBR3 certification, so don't change it.
+ */
+
+/*
+ * debug register access (never use this, it will flood your system log)
+ * #define HFC_REGISTER_DEBUG
+ */
+
+static const char *hfcmulti_revision = "2.00";
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mISDNhw.h>
+#include <linux/mISDNdsp.h>
+
+/*
+#define IRQCOUNT_DEBUG
+#define IRQ_DEBUG
+*/
+
+#include "hfc_multi.h"
+#ifdef ECHOPREP
+#include "gaintab.h"
+#endif
+
+#define	MAX_CARDS	8
+#define	MAX_PORTS	(8 * MAX_CARDS)
+
+static LIST_HEAD(HFClist);
+static spinlock_t HFClock; /* global hfc list lock */
+
+static void ph_state_change(struct dchannel *);
+static void (*hfc_interrupt)(void);
+static void (*register_interrupt)(void);
+static int (*unregister_interrupt)(void);
+static int interrupt_registered;
+
+static struct hfc_multi *syncmaster;
+int plxsd_master; /* if we have a master card (yet) */
+static spinlock_t plx_lock; /* may not acquire other lock inside */
+EXPORT_SYMBOL(plx_lock);
+
+#define	TYP_E1		1
+#define	TYP_4S		4
+#define TYP_8S		8
+
+static int poll_timer = 6;	/* default = 128 samples = 16ms */
+/* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */
+static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30  };
+#define	CLKDEL_TE	0x0f	/* CLKDEL in TE mode */
+#define	CLKDEL_NT	0x6c	/* CLKDEL in NT mode
+				   (0x60 MUST be included!) */
+static u_char silence =	0xff;	/* silence by LAW */
+
+#define	DIP_4S	0x1		/* DIP Switches for Beronet 1S/2S/4S cards */
+#define	DIP_8S	0x2		/* DIP Switches for Beronet 8S+ cards */
+#define	DIP_E1	0x3		/* DIP Switches for Beronet E1 cards */
+
+/*
+ * module stuff
+ */
+
+static uint	type[MAX_CARDS];
+static uint	pcm[MAX_CARDS];
+static uint	dslot[MAX_CARDS];
+static uint	iomode[MAX_CARDS];
+static uint	port[MAX_PORTS];
+static uint	debug;
+static uint	poll;
+static uint	timer;
+static uint	clockdelay_te = CLKDEL_TE;
+static uint	clockdelay_nt = CLKDEL_NT;
+
+static int	HFC_cnt, Port_cnt, PCM_cnt = 99;
+
+MODULE_AUTHOR("Andreas Eversberg");
+MODULE_LICENSE("GPL");
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+module_param(poll, uint, S_IRUGO | S_IWUSR);
+module_param(timer, uint, S_IRUGO | S_IWUSR);
+module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
+module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
+module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(pcm, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(dslot, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
+
+#ifdef HFC_REGISTER_DEBUG
+#define HFC_outb(hc, reg, val) \
+	(hc->HFC_outb(hc, reg, val, __func__, __LINE__))
+#define HFC_outb_nodebug(hc, reg, val) \
+	(hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__))
+#define HFC_inb(hc, reg) \
+	(hc->HFC_inb(hc, reg, __func__, __LINE__))
+#define HFC_inb_nodebug(hc, reg) \
+	(hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__))
+#define HFC_inw(hc, reg) \
+	(hc->HFC_inw(hc, reg, __func__, __LINE__))
+#define HFC_inw_nodebug(hc, reg) \
+	(hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__))
+#define HFC_wait(hc) \
+	(hc->HFC_wait(hc, __func__, __LINE__))
+#define HFC_wait_nodebug(hc) \
+	(hc->HFC_wait_nodebug(hc, __func__, __LINE__))
+#else
+#define HFC_outb(hc, reg, val)		(hc->HFC_outb(hc, reg, val))
+#define HFC_outb_nodebug(hc, reg, val)	(hc->HFC_outb_nodebug(hc, reg, val))
+#define HFC_inb(hc, reg)		(hc->HFC_inb(hc, reg))
+#define HFC_inb_nodebug(hc, reg)	(hc->HFC_inb_nodebug(hc, reg))
+#define HFC_inw(hc, reg)		(hc->HFC_inw(hc, reg))
+#define HFC_inw_nodebug(hc, reg)	(hc->HFC_inw_nodebug(hc, reg))
+#define HFC_wait(hc)			(hc->HFC_wait(hc))
+#define HFC_wait_nodebug(hc)		(hc->HFC_wait_nodebug(hc))
+#endif
+
+/* HFC_IO_MODE_PCIMEM */
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
+		const char *function, int line)
+#else
+HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+	writeb(val, (hc->pci_membase)+reg);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	return readb((hc->pci_membase)+reg);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	return readw((hc->pci_membase)+reg);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_pcimem(struct hfc_multi *hc)
+#endif
+{
+	while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
+}
+
+/* HFC_IO_MODE_REGIO */
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
+	const char *function, int line)
+#else
+HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
+#endif
+{
+	outb(reg, (hc->pci_iobase)+4);
+	outb(val, hc->pci_iobase);
+}
+static u_char
+#ifdef HFC_REGISTER_DEBUG
+HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inb_regio(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	outb(reg, (hc->pci_iobase)+4);
+	return inb(hc->pci_iobase);
+}
+static u_short
+#ifdef HFC_REGISTER_DEBUG
+HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
+#else
+HFC_inw_regio(struct hfc_multi *hc, u_char reg)
+#endif
+{
+	outb(reg, (hc->pci_iobase)+4);
+	return inw(hc->pci_iobase);
+}
+static void
+#ifdef HFC_REGISTER_DEBUG
+HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
+#else
+HFC_wait_regio(struct hfc_multi *hc)
+#endif
+{
+	outb(R_STATUS, (hc->pci_iobase)+4);
+	while (inb(hc->pci_iobase) & V_BUSY);
+}
+
+#ifdef HFC_REGISTER_DEBUG
+static void
+HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
+		const char *function, int line)
+{
+	char regname[256] = "", bits[9] = "xxxxxxxx";
+	int i;
+
+	i = -1;
+	while (hfc_register_names[++i].name) {
+		if (hfc_register_names[i].reg == reg)
+			strcat(regname, hfc_register_names[i].name);
+	}
+	if (regname[0] == '\0')
+		strcpy(regname, "register");
+
+	bits[7] = '0'+(!!(val&1));
+	bits[6] = '0'+(!!(val&2));
+	bits[5] = '0'+(!!(val&4));
+	bits[4] = '0'+(!!(val&8));
+	bits[3] = '0'+(!!(val&16));
+	bits[2] = '0'+(!!(val&32));
+	bits[1] = '0'+(!!(val&64));
+	bits[0] = '0'+(!!(val&128));
+	printk(KERN_DEBUG
+	    "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
+	    hc->id, reg, regname, val, bits, function, line);
+	HFC_outb_nodebug(hc, reg, val);
+}
+static u_char
+HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
+{
+	char regname[256] = "", bits[9] = "xxxxxxxx";
+	u_char val = HFC_inb_nodebug(hc, reg);
+	int i;
+
+	i = 0;
+	while (hfc_register_names[i++].name)
+		;
+	while (hfc_register_names[++i].name) {
+		if (hfc_register_names[i].reg == reg)
+			strcat(regname, hfc_register_names[i].name);
+	}
+	if (regname[0] == '\0')
+		strcpy(regname, "register");
+
+	bits[7] = '0'+(!!(val&1));
+	bits[6] = '0'+(!!(val&2));
+	bits[5] = '0'+(!!(val&4));
+	bits[4] = '0'+(!!(val&8));
+	bits[3] = '0'+(!!(val&16));
+	bits[2] = '0'+(!!(val&32));
+	bits[1] = '0'+(!!(val&64));
+	bits[0] = '0'+(!!(val&128));
+	printk(KERN_DEBUG
+	    "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
+	    hc->id, reg, regname, val, bits, function, line);
+	return val;
+}
+static u_short
+HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
+{
+	char regname[256] = "";
+	u_short val = HFC_inw_nodebug(hc, reg);
+	int i;
+
+	i = 0;
+	while (hfc_register_names[i++].name)
+		;
+	while (hfc_register_names[++i].name) {
+		if (hfc_register_names[i].reg == reg)
+			strcat(regname, hfc_register_names[i].name);
+	}
+	if (regname[0] == '\0')
+		strcpy(regname, "register");
+
+	printk(KERN_DEBUG
+	    "HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n",
+	    hc->id, reg, regname, val, function, line);
+	return val;
+}
+static void
+HFC_wait_debug(struct hfc_multi *hc, const char *function, int line)
+{
+	printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n",
+	    hc->id, function, line);
+	HFC_wait_nodebug(hc);
+}
+#endif
+
+/* write fifo data (REGIO) */
+void
+write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
+{
+	outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
+	while (len>>2) {
+		outl(*(u32 *)data, hc->pci_iobase);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		outw(*(u16 *)data, hc->pci_iobase);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		outb(*data, hc->pci_iobase);
+		data++;
+		len--;
+	}
+}
+/* write fifo data (PCIMEM) */
+void
+write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
+{
+	while (len>>2) {
+		writel(*(u32 *)data, (hc->pci_membase)+A_FIFO_DATA0);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		writew(*(u16 *)data, (hc->pci_membase)+A_FIFO_DATA0);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		writeb(*data, (hc->pci_membase)+A_FIFO_DATA0);
+		data++;
+		len--;
+	}
+}
+/* read fifo data (REGIO) */
+void
+read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
+{
+	outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
+	while (len>>2) {
+		*(u32 *)data = inl(hc->pci_iobase);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		*(u16 *)data = inw(hc->pci_iobase);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		*data = inb(hc->pci_iobase);
+		data++;
+		len--;
+	}
+}
+
+/* read fifo data (PCIMEM) */
+void
+read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
+{
+	while (len>>2) {
+		*(u32 *)data =
+			readl((hc->pci_membase)+A_FIFO_DATA0);
+		data += 4;
+		len -= 4;
+	}
+	while (len>>1) {
+		*(u16 *)data =
+			readw((hc->pci_membase)+A_FIFO_DATA0);
+		data += 2;
+		len -= 2;
+	}
+	while (len) {
+		*data = readb((hc->pci_membase)+A_FIFO_DATA0);
+		data++;
+		len--;
+	}
+}
+
+
+static void
+enable_hwirq(struct hfc_multi *hc)
+{
+	hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN;
+	HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
+}
+
+static void
+disable_hwirq(struct hfc_multi *hc)
+{
+	hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN);
+	HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
+}
+
+#define	NUM_EC 2
+#define	MAX_TDM_CHAN 32
+
+
+inline void
+enablepcibridge(struct hfc_multi *c)
+{
+	HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */
+}
+
+inline void
+disablepcibridge(struct hfc_multi *c)
+{
+	HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */
+}
+
+inline unsigned char
+readpcibridge(struct hfc_multi *hc, unsigned char address)
+{
+	unsigned short cipv;
+	unsigned char data;
+
+	if (!hc->pci_iobase)
+		return 0;
+
+	/* slow down a PCI read access by 1 PCI clock cycle */
+	HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/
+
+	if (address == 0)
+		cipv = 0x4000;
+	else
+		cipv = 0x5800;
+
+	/* select local bridge port address by writing to CIP port */
+	/* data = HFC_inb(c, cipv); * was _io before */
+	outw(cipv, hc->pci_iobase + 4);
+	data = inb(hc->pci_iobase);
+
+	/* restore R_CTRL for normal PCI read cycle speed */
+	HFC_outb(hc, R_CTRL, 0x0); /* was _io before */
+
+	return data;
+}
+
+inline void
+writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
+{
+	unsigned short cipv;
+	unsigned int datav;
+
+	if (!hc->pci_iobase)
+		return;
+
+	if (address == 0)
+		cipv = 0x4000;
+	else
+		cipv = 0x5800;
+
+	/* select local bridge port address by writing to CIP port */
+	outw(cipv, hc->pci_iobase + 4);
+	/* define a 32 bit dword with 4 identical bytes for write sequence */
+	datav = data | ((__u32) data << 8) | ((__u32) data << 16) |
+	    ((__u32) data << 24);
+
+	/*
+	 * write this 32 bit dword to the bridge data port
+	 * this will initiate a write sequence of up to 4 writes to the same
+	 * address on the local bus interface the number of write accesses
+	 * is undefined but >=1 and depends on the next PCI transaction
+	 * during write sequence on the local bus
+	 */
+	outl(datav, hc->pci_iobase);
+}
+
+inline void
+cpld_set_reg(struct hfc_multi *hc, unsigned char reg)
+{
+	/* Do data pin read low byte */
+	HFC_outb(hc, R_GPIO_OUT1, reg);
+}
+
+inline void
+cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
+{
+	cpld_set_reg(hc, reg);
+
+	enablepcibridge(hc);
+	writepcibridge(hc, 1, val);
+	disablepcibridge(hc);
+
+	return;
+}
+
+inline unsigned char
+cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
+{
+	unsigned char bytein;
+
+	cpld_set_reg(hc, reg);
+
+	/* Do data pin read low byte */
+	HFC_outb(hc, R_GPIO_OUT1, reg);
+
+	enablepcibridge(hc);
+	bytein = readpcibridge(hc, 1);
+	disablepcibridge(hc);
+
+	return bytein;
+}
+
+inline void
+vpm_write_address(struct hfc_multi *hc, unsigned short addr)
+{
+	cpld_write_reg(hc, 0, 0xff & addr);
+	cpld_write_reg(hc, 1, 0x01 & (addr >> 8));
+}
+
+inline unsigned short
+vpm_read_address(struct hfc_multi *c)
+{
+	unsigned short addr;
+	unsigned short highbit;
+
+	addr = cpld_read_reg(c, 0);
+	highbit = cpld_read_reg(c, 1);
+
+	addr = addr | (highbit << 8);
+
+	return addr & 0x1ff;
+}
+
+inline unsigned char
+vpm_in(struct hfc_multi *c, int which, unsigned short addr)
+{
+	unsigned char res;
+
+	vpm_write_address(c, addr);
+
+	if (!which)
+		cpld_set_reg(c, 2);
+	else
+		cpld_set_reg(c, 3);
+
+	enablepcibridge(c);
+	res = readpcibridge(c, 1);
+	disablepcibridge(c);
+
+	cpld_set_reg(c, 0);
+
+	return res;
+}
+
+inline void
+vpm_out(struct hfc_multi *c, int which, unsigned short addr,
+    unsigned char data)
+{
+	vpm_write_address(c, addr);
+
+	enablepcibridge(c);
+
+	if (!which)
+		cpld_set_reg(c, 2);
+	else
+		cpld_set_reg(c, 3);
+
+	writepcibridge(c, 1, data);
+
+	cpld_set_reg(c, 0);
+
+	disablepcibridge(c);
+
+	{
+	unsigned char regin;
+	regin = vpm_in(c, which, addr);
+	if (regin != data)
+		printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back "
+			"0x%x\n", data, addr, regin);
+	}
+
+}
+
+
+void
+vpm_init(struct hfc_multi *wc)
+{
+	unsigned char reg;
+	unsigned int mask;
+	unsigned int i, x, y;
+	unsigned int ver;
+
+	for (x = 0; x < NUM_EC; x++) {
+		/* Setup GPIO's */
+		if (!x) {
+			ver = vpm_in(wc, x, 0x1a0);
+			printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver);
+		}
+
+		for (y = 0; y < 4; y++) {
+			vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */
+			vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */
+			vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */
+		}
+
+		/* Setup TDM path - sets fsync and tdm_clk as inputs */
+		reg = vpm_in(wc, x, 0x1a3); /* misc_con */
+		vpm_out(wc, x, 0x1a3, reg & ~2);
+
+		/* Setup Echo length (256 taps) */
+		vpm_out(wc, x, 0x022, 1);
+		vpm_out(wc, x, 0x023, 0xff);
+
+		/* Setup timeslots */
+		vpm_out(wc, x, 0x02f, 0x00);
+		mask = 0x02020202 << (x * 4);
+
+		/* Setup the tdm channel masks for all chips */
+		for (i = 0; i < 4; i++)
+			vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff);
+
+		/* Setup convergence rate */
+		printk(KERN_DEBUG "VPM: A-law mode\n");
+		reg = 0x00 | 0x10 | 0x01;
+		vpm_out(wc, x, 0x20, reg);
+		printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg);
+		/*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */
+
+		vpm_out(wc, x, 0x24, 0x02);
+		reg = vpm_in(wc, x, 0x24);
+		printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg);
+
+		/* Initialize echo cans */
+		for (i = 0; i < MAX_TDM_CHAN; i++) {
+			if (mask & (0x00000001 << i))
+				vpm_out(wc, x, i, 0x00);
+		}
+
+		/*
+		 * ARM arch at least disallows a udelay of
+		 * more than 2ms... it gives a fake "__bad_udelay"
+		 * reference at link-time.
+		 * long delays in kernel code are pretty sucky anyway
+		 * for now work around it using 5 x 2ms instead of 1 x 10ms
+		 */
+
+		udelay(2000);
+		udelay(2000);
+		udelay(2000);
+		udelay(2000);
+		udelay(2000);
+
+		/* Put in bypass mode */
+		for (i = 0; i < MAX_TDM_CHAN; i++) {
+			if (mask & (0x00000001 << i))
+				vpm_out(wc, x, i, 0x01);
+		}
+
+		/* Enable bypass */
+		for (i = 0; i < MAX_TDM_CHAN; i++) {
+			if (mask & (0x00000001 << i))
+				vpm_out(wc, x, 0x78 + i, 0x01);
+		}
+
+	}
+}
+
+void
+vpm_check(struct hfc_multi *hctmp)
+{
+	unsigned char gpi2;
+
+	gpi2 = HFC_inb(hctmp, R_GPI_IN2);
+
+	if ((gpi2 & 0x3) != 0x3)
+		printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
+}
+
+
+/*
+ * Interface to enable/disable the HW Echocan
+ *
+ * these functions are called within a spin_lock_irqsave on
+ * the channel instance lock, so we are not disturbed by irqs
+ *
+ * we can later easily change the interface to make  other
+ * things configurable, for now we configure the taps
+ *
+ */
+
+void
+vpm_echocan_on(struct hfc_multi *hc, int ch, int taps)
+{
+	unsigned int timeslot;
+	unsigned int unit;
+	struct bchannel *bch = hc->chan[ch].bch;
+#ifdef TXADJ
+	int txadj = -4;
+	struct sk_buff *skb;
+#endif
+	if (hc->chan[ch].protocol != ISDN_P_B_RAW)
+		return;
+
+	if (!bch)
+		return;
+
+#ifdef TXADJ
+	skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
+		sizeof(int), &txadj, GFP_ATOMIC);
+	if (skb)
+		recv_Bchannel_skb(bch, skb);
+#endif
+
+	timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
+	unit = ch % 4;
+
+	printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n",
+	    taps, timeslot);
+
+	vpm_out(hc, unit, timeslot, 0x7e);
+}
+
+void
+vpm_echocan_off(struct hfc_multi *hc, int ch)
+{
+	unsigned int timeslot;
+	unsigned int unit;
+	struct bchannel *bch = hc->chan[ch].bch;
+#ifdef TXADJ
+	int txadj = 0;
+	struct sk_buff *skb;
+#endif
+
+	if (hc->chan[ch].protocol != ISDN_P_B_RAW)
+		return;
+
+	if (!bch)
+		return;
+
+#ifdef TXADJ
+	skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
+		sizeof(int), &txadj, GFP_ATOMIC);
+	if (skb)
+		recv_Bchannel_skb(bch, skb);
+#endif
+
+	timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
+	unit = ch % 4;
+
+	printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n",
+	    timeslot);
+	/* FILLME */
+	vpm_out(hc, unit, timeslot, 0x01);
+}
+
+
+/*
+ * Speech Design resync feature
+ * NOTE: This is called sometimes outside interrupt handler.
+ * We must lock irqsave, so no other interrupt (other card) will occurr!
+ * Also multiple interrupts may nest, so must lock each access (lists, card)!
+ */
+static inline void
+hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
+{
+	struct hfc_multi *hc, *next, *pcmmaster = 0;
+	u_int *plx_acc_32, pv;
+	u_long flags;
+
+	spin_lock_irqsave(&HFClock, flags);
+	spin_lock(&plx_lock); /* must be locked inside other locks */
+
+	if (debug & DEBUG_HFCMULTI_PLXSD)
+		printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n",
+			__func__, syncmaster);
+
+	/* select new master */
+	if (newmaster) {
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "using provided controller\n");
+	} else {
+		list_for_each_entry_safe(hc, next, &HFClist, list) {
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+				if (hc->syncronized) {
+					newmaster = hc;
+					break;
+				}
+			}
+		}
+	}
+
+	/* Disable sync of all cards */
+	list_for_each_entry_safe(hc, next, &HFClist, list) {
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+			pv = readl(plx_acc_32);
+			pv &= ~PLX_SYNC_O_EN;
+			writel(pv, plx_acc_32);
+			if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
+				pcmmaster = hc;
+				if (hc->type == 1) {
+					if (debug & DEBUG_HFCMULTI_PLXSD)
+						printk(KERN_DEBUG
+							"Schedule SYNC_I\n");
+					hc->e1_resync |= 1; /* get SYNC_I */
+				}
+			}
+		}
+	}
+
+	if (newmaster) {
+		hc = newmaster;
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
+				"interface.\n", hc->id, hc);
+		/* Enable new sync master */
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		pv = readl(plx_acc_32);
+		pv |= PLX_SYNC_O_EN;
+		writel(pv, plx_acc_32);
+		/* switch to jatt PLL, if not disabled by RX_SYNC */
+		if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "Schedule jatt PLL\n");
+			hc->e1_resync |= 2; /* switch to jatt */
+		}
+	} else {
+		if (pcmmaster) {
+			hc = pcmmaster;
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG
+					"id=%d (0x%p) = PCM master syncronized "
+					"with QUARTZ\n", hc->id, hc);
+			if (hc->type == 1) {
+				/* Use the crystal clock for the PCM
+				   master card */
+				if (debug & DEBUG_HFCMULTI_PLXSD)
+					printk(KERN_DEBUG
+					    "Schedule QUARTZ for HFC-E1\n");
+				hc->e1_resync |= 4; /* switch quartz */
+			} else {
+				if (debug & DEBUG_HFCMULTI_PLXSD)
+					printk(KERN_DEBUG
+					    "QUARTZ is automatically "
+					    "enabled by HFC-%dS\n", hc->type);
+			}
+			plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+			pv = readl(plx_acc_32);
+			pv |= PLX_SYNC_O_EN;
+			writel(pv, plx_acc_32);
+		} else
+			if (!rm)
+				printk(KERN_ERR "%s no pcm master, this MUST "
+					"not happen!\n", __func__);
+	}
+	syncmaster = newmaster;
+
+	spin_unlock(&plx_lock);
+	spin_unlock_irqrestore(&HFClock, flags);
+}
+
+/* This must be called AND hc must be locked irqsave!!! */
+inline void
+plxsd_checksync(struct hfc_multi *hc, int rm)
+{
+	if (hc->syncronized) {
+		if (syncmaster == NULL) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_WARNING "%s: GOT sync on card %d"
+					" (id=%d)\n", __func__, hc->id + 1,
+					hc->id);
+			hfcmulti_resync(hc, hc, rm);
+		}
+	} else {
+		if (syncmaster == hc) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_WARNING "%s: LOST sync on card %d"
+					" (id=%d)\n", __func__, hc->id + 1,
+					hc->id);
+			hfcmulti_resync(hc, NULL, rm);
+		}
+	}
+}
+
+
+/*
+ * free hardware resources used by driver
+ */
+static void
+release_io_hfcmulti(struct hfc_multi *hc)
+{
+	u_int	*plx_acc_32, pv;
+	u_long	plx_flags;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+
+	/* soft reset also masks all interrupts */
+	hc->hw.r_cirm |= V_SRES;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(1000);
+	hc->hw.r_cirm &= ~V_SRES;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(1000); /* instead of 'wait' that may cause locking */
+
+	/* release Speech Design card, if PLX was initialized */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) {
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "%s: release PLXSD card %d\n",
+			    __func__, hc->id + 1);
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		writel(PLX_GPIOC_INIT, plx_acc_32);
+		pv = readl(plx_acc_32);
+		/* Termination off */
+		pv &= ~PLX_TERM_ON;
+		/* Disconnect the PCM */
+		pv |= PLX_SLAVE_EN_N;
+		pv &= ~PLX_MASTER_EN;
+		pv &= ~PLX_SYNC_O_EN;
+		/* Put the DSP in Reset */
+		pv &= ~PLX_DSP_RES_N;
+		writel(pv, plx_acc_32);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
+				__func__, pv);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	/* disable memory mapped ports / io ports */
+	test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
+	pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
+	if (hc->pci_membase)
+		iounmap((void *)hc->pci_membase);
+	if (hc->plx_membase)
+		iounmap((void *)hc->plx_membase);
+	if (hc->pci_iobase)
+		release_region(hc->pci_iobase, 8);
+
+	if (hc->pci_dev) {
+		pci_disable_device(hc->pci_dev);
+		pci_set_drvdata(hc->pci_dev, NULL);
+	}
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done\n", __func__);
+}
+
+/*
+ * function called to reset the HFC chip. A complete software reset of chip
+ * and fifos is done. All configuration of the chip is done.
+ */
+
+static int
+init_chip(struct hfc_multi *hc)
+{
+	u_long			flags, val, val2 = 0, rev;
+	int			i, err = 0;
+	u_char			r_conf_en, rval;
+	u_int			*plx_acc_32, pv;
+	u_long			plx_flags, hfc_flags;
+	int			plx_count;
+	struct hfc_multi	*pos, *next, *plx_last_hc;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	/* reset all registers */
+	memset(&hc->hw, 0, sizeof(struct hfcm_hw));
+
+	/* revision check */
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+	val = HFC_inb(hc, R_CHIP_ID)>>4;
+	if (val != 0x8 && val != 0xc && val != 0xe) {
+		printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
+		err = -EIO;
+		goto out;
+	}
+	rev = HFC_inb(hc, R_CHIP_RV);
+	printk(KERN_INFO
+	    "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
+	    val, rev, (rev == 0) ? " (old FIFO handling)" : "");
+	if (rev == 0) {
+		test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
+		printk(KERN_WARNING
+		    "HFC_multi: NOTE: Your chip is revision 0, "
+		    "ask Cologne Chip for update. Newer chips "
+		    "have a better FIFO handling. Old chips "
+		    "still work but may have slightly lower "
+		    "HDLC transmit performance.\n");
+	}
+	if (rev > 1) {
+		printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't "
+		    "consider chip revision = %ld. The chip / "
+		    "bridge may not work.\n", rev);
+	}
+
+	/* set s-ram size */
+	hc->Flen = 0x10;
+	hc->Zmin = 0x80;
+	hc->Zlen = 384;
+	hc->DTMFbase = 0x1000;
+	if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n",
+			    __func__);
+		hc->hw.r_ctrl |= V_EXT_RAM;
+		hc->hw.r_ram_sz = 1;
+		hc->Flen = 0x20;
+		hc->Zmin = 0xc0;
+		hc->Zlen = 1856;
+		hc->DTMFbase = 0x2000;
+	}
+	if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n",
+			    __func__);
+		hc->hw.r_ctrl |= V_EXT_RAM;
+		hc->hw.r_ram_sz = 2;
+		hc->Flen = 0x20;
+		hc->Zmin = 0xc0;
+		hc->Zlen = 8000;
+		hc->DTMFbase = 0x2000;
+	}
+	hc->max_trans = poll << 1;
+	if (hc->max_trans > hc->Zlen)
+		hc->max_trans = hc->Zlen;
+
+	/* Speech Design PLX bridge */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_PLXSD)
+			printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
+			    __func__, hc->id + 1);
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		writel(PLX_GPIOC_INIT, plx_acc_32);
+		pv = readl(plx_acc_32);
+		/* The first and the last cards are terminating the PCM bus */
+		pv |= PLX_TERM_ON; /* hc is currently the last */
+		/* Disconnect the PCM */
+		pv |= PLX_SLAVE_EN_N;
+		pv &= ~PLX_MASTER_EN;
+		pv &= ~PLX_SYNC_O_EN;
+		/* Put the DSP in Reset */
+		pv &= ~PLX_DSP_RES_N;
+		writel(pv, plx_acc_32);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
+				__func__, pv);
+		/*
+		 * If we are the 3rd PLXSD card or higher, we must turn
+		 * termination of last PLXSD card off.
+		 */
+		spin_lock_irqsave(&HFClock, hfc_flags);
+		plx_count = 0;
+		plx_last_hc = NULL;
+		list_for_each_entry_safe(pos, next, &HFClist, list) {
+			if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) {
+				plx_count++;
+				if (pos != hc)
+					plx_last_hc = pos;
+			}
+		}
+		if (plx_count >= 3) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "%s: card %d is between, so "
+					"we disable termination\n",
+				    __func__, plx_last_hc->id + 1);
+			spin_lock_irqsave(&plx_lock, plx_flags);
+			plx_acc_32 = (u_int *)(plx_last_hc->plx_membase
+					+ PLX_GPIOC);
+			pv = readl(plx_acc_32);
+			pv &= ~PLX_TERM_ON;
+			writel(pv, plx_acc_32);
+			spin_unlock_irqrestore(&plx_lock, plx_flags);
+			if (debug & DEBUG_HFCMULTI_INIT)
+			    printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
+					__func__, pv);
+		}
+		spin_unlock_irqrestore(&HFClock, hfc_flags);
+		hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
+	}
+
+	/* we only want the real Z2 read-pointer for revision > 0 */
+	if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
+		hc->hw.r_ram_sz |= V_FZ_MD;
+
+	/* select pcm mode */
+	if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: setting PCM into slave mode\n",
+			    __func__);
+	} else
+	if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: setting PCM into master mode\n",
+			    __func__);
+		hc->hw.r_pcm_md0 |= V_PCM_MD;
+	} else {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: performing PCM auto detect\n",
+			    __func__);
+	}
+
+	/* soft reset */
+	HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
+	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+	HFC_outb(hc, R_FIFO_MD, 0);
+	hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(100);
+	hc->hw.r_cirm = 0;
+	HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
+	udelay(100);
+	HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+
+	/* Speech Design PLX bridge pcm and sync mode */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		pv = readl(plx_acc_32);
+		/* Connect PCM */
+		if (hc->hw.r_pcm_md0 & V_PCM_MD) {
+			pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
+			pv |= PLX_SYNC_O_EN;
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
+					__func__, pv);
+		} else {
+			pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
+			pv &= ~PLX_SYNC_O_EN;
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
+					__func__, pv);
+		}
+		writel(pv, plx_acc_32);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	/* PCM setup */
+	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90);
+	if (hc->slots == 32)
+		HFC_outb(hc, R_PCM_MD1, 0x00);
+	if (hc->slots == 64)
+		HFC_outb(hc, R_PCM_MD1, 0x10);
+	if (hc->slots == 128)
+		HFC_outb(hc, R_PCM_MD1, 0x20);
+	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+		HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
+	else
+		HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
+	HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
+	for (i = 0; i < 256; i++) {
+		HFC_outb_nodebug(hc, R_SLOT, i);
+		HFC_outb_nodebug(hc, A_SL_CFG, 0);
+		HFC_outb_nodebug(hc, A_CONF, 0);
+		hc->slot_owner[i] = -1;
+	}
+
+	/* set clock speed */
+	if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: setting double clock\n", __func__);
+		HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+	}
+
+	/* B410P GPIO */
+	if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+		printk(KERN_NOTICE "Setting GPIOs\n");
+		HFC_outb(hc, R_GPIO_SEL, 0x30);
+		HFC_outb(hc, R_GPIO_EN1, 0x3);
+		udelay(1000);
+		printk(KERN_NOTICE "calling vpm_init\n");
+		vpm_init(hc);
+	}
+
+	/* check if R_F0_CNT counts (8 kHz frame count) */
+	val = HFC_inb(hc, R_F0_CNTL);
+	val += HFC_inb(hc, R_F0_CNTH) << 8;
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG
+		    "HFC_multi F0_CNT %ld after reset\n", val);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout((HZ/100)?:1); /* Timeout minimum 10ms */
+	spin_lock_irqsave(&hc->lock, flags);
+	val2 = HFC_inb(hc, R_F0_CNTL);
+	val2 += HFC_inb(hc, R_F0_CNTH) << 8;
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG
+			"HFC_multi F0_CNT %ld after 10 ms (1st try)\n",
+		    val2);
+	if (val2 >= val+8) { /* 1 ms */
+		/* it counts, so we keep the pcm mode */
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
+			printk(KERN_INFO "controller is PCM bus MASTER\n");
+		else
+		if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip))
+			printk(KERN_INFO "controller is PCM bus SLAVE\n");
+		else {
+			test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+			printk(KERN_INFO "controller is PCM bus SLAVE "
+				"(auto detected)\n");
+		}
+	} else {
+		/* does not count */
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
+controller_fail:
+			printk(KERN_ERR "HFC_multi ERROR, getting no 125us "
+			    "pulse. Seems that controller fails.\n");
+			err = -EIO;
+			goto out;
+		}
+		if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+			printk(KERN_INFO "controller is PCM bus SLAVE "
+				"(ignoring missing PCM clock)\n");
+		} else {
+			/* only one pcm master */
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
+				&& plxsd_master) {
+				printk(KERN_ERR "HFC_multi ERROR, no clock "
+				    "on another Speech Design card found. "
+				    "Please be sure to connect PCM cable.\n");
+				err = -EIO;
+				goto out;
+			}
+			/* retry with master clock */
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+				spin_lock_irqsave(&plx_lock, plx_flags);
+				plx_acc_32 = (u_int *)(hc->plx_membase +
+					PLX_GPIOC);
+				pv = readl(plx_acc_32);
+				pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
+				pv |= PLX_SYNC_O_EN;
+				writel(pv, plx_acc_32);
+				spin_unlock_irqrestore(&plx_lock, plx_flags);
+				if (debug & DEBUG_HFCMULTI_INIT)
+				    printk(KERN_WARNING "%s: master: PLX_GPIO"
+					"=%x\n", __func__, pv);
+			}
+			hc->hw.r_pcm_md0 |= V_PCM_MD;
+			HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
+			spin_unlock_irqrestore(&hc->lock, flags);
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_timeout((HZ/100)?:1); /* Timeout min. 10ms */
+			spin_lock_irqsave(&hc->lock, flags);
+			val2 = HFC_inb(hc, R_F0_CNTL);
+			val2 += HFC_inb(hc, R_F0_CNTH) << 8;
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG "HFC_multi F0_CNT %ld after "
+					"10 ms (2nd try)\n", val2);
+			if (val2 >= val+8) { /* 1 ms */
+				test_and_set_bit(HFC_CHIP_PCM_MASTER,
+					&hc->chip);
+				printk(KERN_INFO "controller is PCM bus MASTER "
+					"(auto detected)\n");
+			} else
+				goto controller_fail;
+		}
+	}
+
+	/* Release the DSP Reset */
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
+			plxsd_master = 1;
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+		pv = readl(plx_acc_32);
+		pv |=  PLX_DSP_RES_N;
+		writel(pv, plx_acc_32);
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
+				__func__, pv);
+	}
+
+	/* pcm id */
+	if (hc->pcm)
+		printk(KERN_INFO "controller has given PCM BUS ID %d\n",
+			hc->pcm);
+	else {
+		if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)
+		 || test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			PCM_cnt++; /* SD has proprietary bridging */
+		}
+		hc->pcm = PCM_cnt;
+		printk(KERN_INFO "controller has PCM BUS ID %d "
+			"(auto selected)\n", hc->pcm);
+	}
+
+	/* set up timer */
+	HFC_outb(hc, R_TI_WD, poll_timer);
+	hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
+
+	/*
+	 * set up 125us interrupt, only if function pointer is available
+	 * and module parameter timer is set
+	 */
+	if (timer && hfc_interrupt && register_interrupt) {
+		/* only one chip should use this interrupt */
+		timer = 0;
+		interrupt_registered = 1;
+		hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK;
+		/* deactivate other interrupts in ztdummy */
+		register_interrupt();
+	}
+
+	/* set E1 state machine IRQ */
+	if (hc->type == 1)
+		hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
+
+	/* set DTMF detection */
+	if (test_bit(HFC_CHIP_DTMF, &hc->chip)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: enabling DTMF detection "
+			    "for all B-channel\n", __func__);
+		hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP;
+		if (test_bit(HFC_CHIP_ULAW, &hc->chip))
+			hc->hw.r_dtmf |= V_ULAW_SEL;
+		HFC_outb(hc, R_DTMF_N, 102 - 1);
+		hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK;
+	}
+
+	/* conference engine */
+	if (test_bit(HFC_CHIP_ULAW, &hc->chip))
+		r_conf_en = V_CONF_EN | V_ULAW;
+	else
+		r_conf_en = V_CONF_EN;
+	HFC_outb(hc, R_CONF_EN, r_conf_en);
+
+	/* setting leds */
+	switch (hc->leds) {
+	case 1: /* HFC-E1 OEM */
+		if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
+			HFC_outb(hc, R_GPIO_SEL, 0x32);
+		else
+			HFC_outb(hc, R_GPIO_SEL, 0x30);
+
+		HFC_outb(hc, R_GPIO_EN1, 0x0f);
+		HFC_outb(hc, R_GPIO_OUT1, 0x00);
+
+		HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
+		break;
+
+	case 2: /* HFC-4S OEM */
+	case 3:
+		HFC_outb(hc, R_GPIO_SEL, 0xf0);
+		HFC_outb(hc, R_GPIO_EN1, 0xff);
+		HFC_outb(hc, R_GPIO_OUT1, 0x00);
+		break;
+	}
+
+	/* set master clock */
+	if (hc->masterclk >= 0) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: setting ST master clock "
+			    "to port %d (0..%d)\n",
+			    __func__, hc->masterclk, hc->ports-1);
+		hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
+		HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
+	}
+
+	/* setting misc irq */
+	HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n",
+		    hc->hw.r_irqmsk_misc);
+
+	/* RAM access test */
+	HFC_outb(hc, R_RAM_ADDR0, 0);
+	HFC_outb(hc, R_RAM_ADDR1, 0);
+	HFC_outb(hc, R_RAM_ADDR2, 0);
+	for (i = 0; i < 256; i++) {
+		HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
+		HFC_outb_nodebug(hc, R_RAM_DATA, ((i*3)&0xff));
+	}
+	for (i = 0; i < 256; i++) {
+		HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
+		HFC_inb_nodebug(hc, R_RAM_DATA);
+		rval = HFC_inb_nodebug(hc, R_INT_DATA);
+		if (rval != ((i * 3) & 0xff)) {
+			printk(KERN_DEBUG
+			    "addr:%x val:%x should:%x\n", i, rval,
+			    (i * 3) & 0xff);
+			err++;
+		}
+	}
+	if (err) {
+		printk(KERN_DEBUG "aborting - %d RAM access errors\n", err);
+		err = -EIO;
+		goto out;
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done\n", __func__);
+out:
+	spin_unlock_irqrestore(&hc->lock, flags);
+	return err;
+}
+
+
+/*
+ * control the watchdog
+ */
+static void
+hfcmulti_watchdog(struct hfc_multi *hc)
+{
+	hc->wdcount++;
+
+	if (hc->wdcount > 10) {
+		hc->wdcount = 0;
+		hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ?
+		    V_GPIO_OUT3 : V_GPIO_OUT2;
+
+	/* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */
+		HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
+		HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte);
+	}
+}
+
+
+
+/*
+ * output leds
+ */
+static void
+hfcmulti_leds(struct hfc_multi *hc)
+{
+	unsigned long lled;
+	unsigned long leddw;
+	int i, state, active, leds;
+	struct dchannel *dch;
+	int led[4];
+
+	hc->ledcount += poll;
+	if (hc->ledcount > 4096) {
+		hc->ledcount -= 4096;
+		hc->ledstate = 0xAFFEAFFE;
+	}
+
+	switch (hc->leds) {
+	case 1: /* HFC-E1 OEM */
+		/* 2 red blinking: NT mode deactivate
+		 * 2 red steady:   TE mode deactivate
+		 * left green:     L1 active
+		 * left red:       frame sync, but no L1
+		 * right green:    L2 active
+		 */
+		if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */
+			if (hc->chan[hc->dslot].dch->dev.D.protocol
+				!= ISDN_P_NT_E1) {
+				led[0] = 1;
+				led[1] = 1;
+			} else if (hc->ledcount>>11) {
+				led[0] = 1;
+				led[1] = 1;
+			} else {
+				led[0] = 0;
+				led[1] = 0;
+			}
+			led[2] = 0;
+			led[3] = 0;
+		} else { /* with frame sync */
+			/* TODO make it work */
+			led[0] = 0;
+			led[1] = 0;
+			led[2] = 0;
+			led[3] = 1;
+		}
+		leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF;
+			/* leds are inverted */
+		if (leds != (int)hc->ledstate) {
+			HFC_outb_nodebug(hc, R_GPIO_OUT1, leds);
+			hc->ledstate = leds;
+		}
+		break;
+
+	case 2: /* HFC-4S OEM */
+		/* red blinking = PH_DEACTIVATE NT Mode
+		 * red steady   = PH_DEACTIVATE TE Mode
+		 * green steady = PH_ACTIVATE
+		 */
+		for (i = 0; i < 4; i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i << 2) | 2].dch;
+			if (dch) {
+				state = dch->state;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+			}
+			if (state) {
+				if (state == active) {
+					led[i] = 1; /* led green */
+				} else
+					if (dch->dev.D.protocol == ISDN_P_TE_S0)
+						/* TE mode: led red */
+						led[i] = 2;
+					else
+						if (hc->ledcount>>11)
+							/* led red */
+							led[i] = 2;
+						else
+							/* led off */
+							led[i] = 0;
+			} else
+				led[i] = 0; /* led off */
+		}
+		if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+			leds = 0;
+			for (i = 0; i < 4; i++) {
+				if (led[i] == 1) {
+					/*green*/
+					leds |= (0x2 << (i * 2));
+				} else if (led[i] == 2) {
+					/*red*/
+					leds |= (0x1 << (i * 2));
+				}
+			}
+			if (leds != (int)hc->ledstate) {
+				vpm_out(hc, 0, 0x1a8 + 3, leds);
+				hc->ledstate = leds;
+			}
+		} else {
+			leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) |
+			    ((led[0] > 0) << 2) | ((led[2] > 0) << 3) |
+			    ((led[3] & 1) << 4) | ((led[1] & 1) << 5) |
+			    ((led[0] & 1) << 6) | ((led[2] & 1) << 7);
+			if (leds != (int)hc->ledstate) {
+				HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F);
+				HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4);
+				hc->ledstate = leds;
+			}
+		}
+		break;
+
+	case 3: /* HFC 1S/2S Beronet */
+		/* red blinking = PH_DEACTIVATE NT Mode
+		 * red steady   = PH_DEACTIVATE TE Mode
+		 * green steady = PH_ACTIVATE
+		 */
+		for (i = 0; i < 2; i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i << 2) | 2].dch;
+			if (dch) {
+				state = dch->state;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+			}
+			if (state) {
+				if (state == active) {
+					led[i] = 1; /* led green */
+				} else
+					if (dch->dev.D.protocol == ISDN_P_TE_S0)
+						/* TE mode: led red */
+						led[i] = 2;
+					else
+						if (hc->ledcount >> 11)
+							/* led red */
+							led[i] = 2;
+						else
+							/* led off */
+							led[i] = 0;
+			} else
+				led[i] = 0; /* led off */
+		}
+
+
+		leds = (led[0] > 0) | ((led[1] > 0)<<1) | ((led[0]&1)<<2)
+			| ((led[1]&1)<<3);
+		if (leds != (int)hc->ledstate) {
+			HFC_outb_nodebug(hc, R_GPIO_EN1,
+			    ((led[0] > 0) << 2) | ((led[1] > 0) << 3));
+			HFC_outb_nodebug(hc, R_GPIO_OUT1,
+			    ((led[0] & 1) << 2) | ((led[1] & 1) << 3));
+			hc->ledstate = leds;
+		}
+		break;
+	case 8: /* HFC 8S+ Beronet */
+		lled = 0;
+
+		for (i = 0; i < 8; i++) {
+			state = 0;
+			active = -1;
+			dch = hc->chan[(i << 2) | 2].dch;
+			if (dch) {
+				state = dch->state;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+			}
+			if (state) {
+				if (state == active) {
+					lled |= 0 << i;
+				} else
+					if (hc->ledcount >> 11)
+						lled |= 0 << i;
+					else
+						lled |= 1 << i;
+			} else
+				lled |= 1 << i;
+		}
+		leddw = lled << 24 | lled << 16 | lled << 8 | lled;
+		if (leddw != hc->ledstate) {
+			/* HFC_outb(hc, R_BRG_PCM_CFG, 1);
+			HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */
+			/* was _io before */
+			HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
+			outw(0x4000, hc->pci_iobase + 4);
+			outl(leddw, hc->pci_iobase);
+			HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+			hc->ledstate = leddw;
+		}
+		break;
+	}
+}
+/*
+ * read dtmf coefficients
+ */
+
+static void
+hfcmulti_dtmf(struct hfc_multi *hc)
+{
+	s32		*coeff;
+	u_int		mantissa;
+	int		co, ch;
+	struct bchannel	*bch = NULL;
+	u8		exponent;
+	int		dtmf = 0;
+	int		addr;
+	u16		w_float;
+	struct sk_buff	*skb;
+	struct mISDNhead *hh;
+
+	if (debug & DEBUG_HFCMULTI_DTMF)
+		printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__);
+	for (ch = 0; ch <= 31; ch++) {
+		/* only process enabled B-channels */
+		bch = hc->chan[ch].bch;
+		if (!bch)
+			continue;
+		if (!hc->created[hc->chan[ch].port])
+			continue;
+		if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
+			continue;
+		if (debug & DEBUG_HFCMULTI_DTMF)
+			printk(KERN_DEBUG "%s: dtmf channel %d:",
+				__func__, ch);
+		coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]);
+		dtmf = 1;
+		for (co = 0; co < 8; co++) {
+			/* read W(n-1) coefficient */
+			addr = hc->DTMFbase + ((co<<7) | (ch<<2));
+			HFC_outb_nodebug(hc, R_RAM_ADDR0, addr);
+			HFC_outb_nodebug(hc, R_RAM_ADDR1, addr>>8);
+			HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr>>16)
+				| V_ADDR_INC);
+			w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
+			w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
+			if (debug & DEBUG_HFCMULTI_DTMF)
+				printk(" %04x", w_float);
+
+			/* decode float (see chip doc) */
+			mantissa = w_float & 0x0fff;
+			if (w_float & 0x8000)
+				mantissa |= 0xfffff000;
+			exponent = (w_float>>12) & 0x7;
+			if (exponent) {
+				mantissa ^= 0x1000;
+				mantissa <<= (exponent-1);
+			}
+
+			/* store coefficient */
+			coeff[co<<1] = mantissa;
+
+			/* read W(n) coefficient */
+			w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
+			w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
+			if (debug & DEBUG_HFCMULTI_DTMF)
+				printk(" %04x", w_float);
+
+			/* decode float (see chip doc) */
+			mantissa = w_float & 0x0fff;
+			if (w_float & 0x8000)
+				mantissa |= 0xfffff000;
+			exponent = (w_float>>12) & 0x7;
+			if (exponent) {
+				mantissa ^= 0x1000;
+				mantissa <<= (exponent-1);
+			}
+
+			/* store coefficient */
+			coeff[(co<<1)|1] = mantissa;
+		}
+		if (debug & DEBUG_HFCMULTI_DTMF)
+			printk("%s: DTMF ready %08x %08x %08x %08x "
+			    "%08x %08x %08x %08x\n", __func__,
+			    coeff[0], coeff[1], coeff[2], coeff[3],
+			    coeff[4], coeff[5], coeff[6], coeff[7]);
+		hc->chan[ch].coeff_count++;
+		if (hc->chan[ch].coeff_count == 8) {
+			hc->chan[ch].coeff_count = 0;
+			skb = mI_alloc_skb(512, GFP_ATOMIC);
+			if (!skb) {
+				printk(KERN_WARNING "%s: No memory for skb\n",
+				    __func__);
+				continue;
+			}
+			hh = mISDN_HEAD_P(skb);
+			hh->prim = PH_CONTROL_IND;
+			hh->id = DTMF_HFC_COEF;
+			memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512);
+			recv_Bchannel_skb(bch, skb);
+		}
+	}
+
+	/* restart DTMF processing */
+	hc->dtmf = dtmf;
+	if (dtmf)
+		HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF);
+}
+
+
+/*
+ * fill fifo as much as possible
+ */
+
+static void
+hfcmulti_tx(struct hfc_multi *hc, int ch)
+{
+	int i, ii, temp, len = 0;
+	int Zspace, z1, z2; /* must be int for calculation */
+	int Fspace, f1, f2;
+	u_char *d;
+	int *txpending, slot_tx;
+	struct	bchannel *bch;
+	struct  dchannel *dch;
+	struct  sk_buff **sp = NULL;
+	int *idxp;
+
+	bch = hc->chan[ch].bch;
+	dch = hc->chan[ch].dch;
+	if ((!dch) && (!bch))
+		return;
+
+	txpending = &hc->chan[ch].txpending;
+	slot_tx = hc->chan[ch].slot_tx;
+	if (dch) {
+		if (!test_bit(FLG_ACTIVE, &dch->Flags))
+			return;
+		sp = &dch->tx_skb;
+		idxp = &dch->tx_idx;
+	} else {
+		if (!test_bit(FLG_ACTIVE, &bch->Flags))
+			return;
+		sp = &bch->tx_skb;
+		idxp = &bch->tx_idx;
+	}
+	if (*sp)
+		len = (*sp)->len;
+
+	if ((!len) && *txpending != 1)
+		return; /* no data */
+
+	if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+	    (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
+	    (hc->chan[ch].slot_rx < 0) &&
+	    (hc->chan[ch].slot_tx < 0))
+		HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1));
+	else
+		HFC_outb_nodebug(hc, R_FIFO, ch << 1);
+	HFC_wait_nodebug(hc);
+
+	if (*txpending == 2) {
+		/* reset fifo */
+		HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait_nodebug(hc);
+		HFC_outb(hc, A_SUBCH_CFG, 0);
+		*txpending = 1;
+	}
+next_frame:
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		f1 = HFC_inb_nodebug(hc, A_F1);
+		f2 = HFC_inb_nodebug(hc, A_F2);
+		while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) {
+			if (debug & DEBUG_HFCMULTI_FIFO)
+				printk(KERN_DEBUG
+				    "%s(card %d): reread f2 because %d!=%d\n",
+				    __func__, hc->id + 1, temp, f2);
+			f2 = temp; /* repeat until F2 is equal */
+		}
+		Fspace = f2 - f1 - 1;
+		if (Fspace < 0)
+			Fspace += hc->Flen;
+		/*
+		 * Old FIFO handling doesn't give us the current Z2 read
+		 * pointer, so we cannot send the next frame before the fifo
+		 * is empty. It makes no difference except for a slightly
+		 * lower performance.
+		 */
+		if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) {
+			if (f1 != f2)
+				Fspace = 0;
+			else
+				Fspace = 1;
+		}
+		/* one frame only for ST D-channels, to allow resending */
+		if (hc->type != 1 && dch) {
+			if (f1 != f2)
+				Fspace = 0;
+		}
+		/* F-counter full condition */
+		if (Fspace == 0)
+			return;
+	}
+	z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
+	z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
+	while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) {
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG "%s(card %d): reread z2 because "
+				"%d!=%d\n", __func__, hc->id + 1, temp, z2);
+		z2 = temp; /* repeat unti Z2 is equal */
+	}
+	Zspace = z2 - z1;
+	if (Zspace <= 0)
+		Zspace += hc->Zlen;
+	Zspace -= 4; /* keep not too full, so pointers will not overrun */
+	/* fill transparent data only to maxinum transparent load (minus 4) */
+	if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+		Zspace = Zspace - hc->Zlen + hc->max_trans;
+	if (Zspace <= 0) /* no space of 4 bytes */
+		return;
+
+	/* if no data */
+	if (!len) {
+		if (z1 == z2) { /* empty */
+			/* if done with FIFO audio data during PCM connection */
+			if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) &&
+			    *txpending && slot_tx >= 0) {
+				if (debug & DEBUG_HFCMULTI_MODE)
+					printk(KERN_DEBUG
+					    "%s: reconnecting PCM due to no "
+					    "more FIFO data: channel %d "
+					    "slot_tx %d\n",
+					    __func__, ch, slot_tx);
+				/* connect slot */
+				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+				    V_HDLC_TRP | V_IFF);
+				HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
+				HFC_wait_nodebug(hc);
+				HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+				    V_HDLC_TRP | V_IFF);
+				HFC_outb_nodebug(hc, R_FIFO, ch<<1);
+				HFC_wait_nodebug(hc);
+			}
+			*txpending = 0;
+		}
+		return; /* no data */
+	}
+
+	/* if audio data and connected slot */
+	if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
+		&& slot_tx >= 0) {
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: disconnecting PCM due to "
+			    "FIFO data: channel %d slot_tx %d\n",
+			    __func__, ch, slot_tx);
+		/* disconnect slot */
+		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
+		HFC_wait_nodebug(hc);
+		HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+		HFC_outb_nodebug(hc, R_FIFO, ch<<1);
+		HFC_wait_nodebug(hc);
+	}
+	*txpending = 1;
+
+	/* show activity */
+	hc->activity[hc->chan[ch].port] = 1;
+
+	/* fill fifo to what we have left */
+	ii = len;
+	if (dch || test_bit(FLG_HDLC, &bch->Flags))
+		temp = 1;
+	else
+		temp = 0;
+	i = *idxp;
+	d = (*sp)->data + i;
+	if (ii - i > Zspace)
+		ii = Zspace + i;
+	if (debug & DEBUG_HFCMULTI_FIFO)
+		printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
+		    "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
+			__func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
+			temp ? "HDLC":"TRANS");
+
+
+	/* Have to prep the audio data */
+	hc->write_fifo(hc, d, ii - i);
+	*idxp = ii;
+
+	/* if not all data has been written */
+	if (ii != len) {
+		/* NOTE: fifo is started by the calling function */
+		return;
+	}
+
+	/* if all data has been written, terminate frame */
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		/* increment f-counter */
+		HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
+		HFC_wait_nodebug(hc);
+	}
+
+	/* send confirm, since get_net_bframe will not do it with trans */
+	if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+		confirm_Bsend(bch);
+
+	/* check for next frame */
+	dev_kfree_skb(*sp);
+	if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */
+		len = (*sp)->len;
+		goto next_frame;
+	}
+	if (dch && get_next_dframe(dch)) {
+		len = (*sp)->len;
+		goto next_frame;
+	}
+
+	/*
+	 * now we have no more data, so in case of transparent,
+	 * we set the last byte in fifo to 'silence' in case we will get
+	 * no more data at all. this prevents sending an undefined value.
+	 */
+	if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
+		HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+}
+
+
+/* NOTE: only called if E1 card is in active state */
+static void
+hfcmulti_rx(struct hfc_multi *hc, int ch)
+{
+	int temp;
+	int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */
+	int f1 = 0, f2 = 0; /* = 0, to make GCC happy */
+	int again = 0;
+	struct	bchannel *bch;
+	struct  dchannel *dch;
+	struct sk_buff	*skb, **sp = NULL;
+	int	maxlen;
+
+	bch = hc->chan[ch].bch;
+	dch = hc->chan[ch].dch;
+	if ((!dch) && (!bch))
+		return;
+	if (dch) {
+		if (!test_bit(FLG_ACTIVE, &dch->Flags))
+			return;
+		sp = &dch->rx_skb;
+		maxlen = dch->maxlen;
+	} else {
+		if (!test_bit(FLG_ACTIVE, &bch->Flags))
+			return;
+		sp = &bch->rx_skb;
+		maxlen = bch->maxlen;
+	}
+next_frame:
+	/* on first AND before getting next valid frame, R_FIFO must be written
+	   to. */
+	if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+	    (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
+	    (hc->chan[ch].slot_rx < 0) &&
+	    (hc->chan[ch].slot_tx < 0))
+		HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch<<1) | 1);
+	else
+		HFC_outb_nodebug(hc, R_FIFO, (ch<<1)|1);
+	HFC_wait_nodebug(hc);
+
+	/* ignore if rx is off BUT change fifo (above) to start pending TX */
+	if (hc->chan[ch].rx_off)
+		return;
+
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		f1 = HFC_inb_nodebug(hc, A_F1);
+		while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) {
+			if (debug & DEBUG_HFCMULTI_FIFO)
+				printk(KERN_DEBUG
+				    "%s(card %d): reread f1 because %d!=%d\n",
+				    __func__, hc->id + 1, temp, f1);
+			f1 = temp; /* repeat until F1 is equal */
+		}
+		f2 = HFC_inb_nodebug(hc, A_F2);
+	}
+	z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
+	while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) {
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG "%s(card %d): reread z2 because "
+				"%d!=%d\n", __func__, hc->id + 1, temp, z2);
+		z1 = temp; /* repeat until Z1 is equal */
+	}
+	z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
+	Zsize = z1 - z2;
+	if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2)
+		/* complete hdlc frame */
+		Zsize++;
+	if (Zsize < 0)
+		Zsize += hc->Zlen;
+	/* if buffer is empty */
+	if (Zsize <= 0)
+		return;
+
+	if (*sp == NULL) {
+		*sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC);
+		if (*sp == NULL) {
+			printk(KERN_DEBUG "%s: No mem for rx_skb\n",
+			    __func__);
+			return;
+		}
+	}
+	/* show activity */
+	hc->activity[hc->chan[ch].port] = 1;
+
+	/* empty fifo with what we have */
+	if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d "
+			    "bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) "
+			    "got=%d (again %d)\n", __func__, hc->id + 1, ch,
+			    Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE",
+			    f1, f2, Zsize + (*sp)->len, again);
+		/* HDLC */
+		if ((Zsize + (*sp)->len) > (maxlen + 3)) {
+			if (debug & DEBUG_HFCMULTI_FIFO)
+				printk(KERN_DEBUG
+				    "%s(card %d): hdlc-frame too large.\n",
+				    __func__, hc->id + 1);
+			skb_trim(*sp, 0);
+			HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait_nodebug(hc);
+			return;
+		}
+
+		hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
+
+		if (f1 != f2) {
+			/* increment Z2,F2-counter */
+			HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
+			HFC_wait_nodebug(hc);
+			/* check size */
+			if ((*sp)->len < 4) {
+				if (debug & DEBUG_HFCMULTI_FIFO)
+					printk(KERN_DEBUG
+					    "%s(card %d): Frame below minimum "
+					    "size\n", __func__, hc->id + 1);
+				skb_trim(*sp, 0);
+				goto next_frame;
+			}
+			/* there is at least one complete frame, check crc */
+			if ((*sp)->data[(*sp)->len - 1]) {
+				if (debug & DEBUG_HFCMULTI_CRC)
+					printk(KERN_DEBUG
+					    "%s: CRC-error\n", __func__);
+				skb_trim(*sp, 0);
+				goto next_frame;
+			}
+			skb_trim(*sp, (*sp)->len - 3);
+			if ((*sp)->len < MISDN_COPY_SIZE) {
+				skb = *sp;
+				*sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
+				if (*sp) {
+					memcpy(skb_put(*sp, skb->len),
+					    skb->data, skb->len);
+					skb_trim(skb, 0);
+				} else {
+					printk(KERN_DEBUG "%s: No mem\n",
+					    __func__);
+					*sp = skb;
+					skb = NULL;
+				}
+			} else {
+				skb = NULL;
+			}
+			if (debug & DEBUG_HFCMULTI_FIFO) {
+				printk(KERN_DEBUG "%s(card %d):",
+					__func__, hc->id + 1);
+				temp = 0;
+				while (temp < (*sp)->len)
+					printk(" %02x", (*sp)->data[temp++]);
+				printk("\n");
+			}
+			if (dch)
+				recv_Dchannel(dch);
+			else
+				recv_Bchannel(bch);
+			*sp = skb;
+			again++;
+			goto next_frame;
+		}
+		/* there is an incomplete frame */
+	} else {
+		/* transparent */
+		if (Zsize > skb_tailroom(*sp))
+			Zsize = skb_tailroom(*sp);
+		hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
+		if (((*sp)->len) < MISDN_COPY_SIZE) {
+			skb = *sp;
+			*sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
+			if (*sp) {
+				memcpy(skb_put(*sp, skb->len),
+				    skb->data, skb->len);
+				skb_trim(skb, 0);
+			} else {
+				printk(KERN_DEBUG "%s: No mem\n", __func__);
+				*sp = skb;
+				skb = NULL;
+			}
+		} else {
+			skb = NULL;
+		}
+		if (debug & DEBUG_HFCMULTI_FIFO)
+			printk(KERN_DEBUG
+			    "%s(card %d): fifo(%d) reading %d bytes "
+			    "(z1=%04x, z2=%04x) TRANS\n",
+				__func__, hc->id + 1, ch, Zsize, z1, z2);
+		/* only bch is transparent */
+		recv_Bchannel(bch);
+		*sp = skb;
+	}
+}
+
+
+/*
+ * Interrupt handler
+ */
+static void
+signal_state_up(struct dchannel *dch, int info, char *msg)
+{
+	struct sk_buff	*skb;
+	int		id, data = info;
+
+	if (debug & DEBUG_HFCMULTI_STATE)
+		printk(KERN_DEBUG "%s: %s\n", __func__, msg);
+
+	id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */
+
+	skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data,
+		GFP_ATOMIC);
+	if (!skb)
+		return;
+	recv_Dchannel_skb(dch, skb);
+}
+
+static inline void
+handle_timer_irq(struct hfc_multi *hc)
+{
+	int		ch, temp;
+	struct dchannel	*dch;
+	u_long		flags;
+
+	/* process queued resync jobs */
+	if (hc->e1_resync) {
+		/* lock, so e1_resync gets not changed */
+		spin_lock_irqsave(&HFClock, flags);
+		if (hc->e1_resync & 1) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "Enable SYNC_I\n");
+			HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC);
+			/* disable JATT, if RX_SYNC is set */
+			if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
+				HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
+		}
+		if (hc->e1_resync & 2) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG "Enable jatt PLL\n");
+			HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
+		}
+		if (hc->e1_resync & 4) {
+			if (debug & DEBUG_HFCMULTI_PLXSD)
+				printk(KERN_DEBUG
+				    "Enable QUARTZ for HFC-E1\n");
+			/* set jatt to quartz */
+			HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC
+				| V_JATT_OFF);
+			/* switch to JATT, in case it is not already */
+			HFC_outb(hc, R_SYNC_OUT, 0);
+		}
+		hc->e1_resync = 0;
+		spin_unlock_irqrestore(&HFClock, flags);
+	}
+
+	if (hc->type != 1 || hc->e1_state == 1)
+		for (ch = 0; ch <= 31; ch++) {
+			if (hc->created[hc->chan[ch].port]) {
+				hfcmulti_tx(hc, ch);
+				/* fifo is started when switching to rx-fifo */
+				hfcmulti_rx(hc, ch);
+				if (hc->chan[ch].dch &&
+				    hc->chan[ch].nt_timer > -1) {
+					dch = hc->chan[ch].dch;
+					if (!(--hc->chan[ch].nt_timer)) {
+						schedule_event(dch,
+						    FLG_PHCHANGE);
+						if (debug &
+						    DEBUG_HFCMULTI_STATE)
+							printk(KERN_DEBUG
+							    "%s: nt_timer at "
+							    "state %x\n",
+							    __func__,
+							    dch->state);
+					}
+				}
+			}
+		}
+	if (hc->type == 1 && hc->created[0]) {
+		dch = hc->chan[hc->dslot].dch;
+		if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
+			/* LOS */
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS;
+			if (!temp && hc->chan[hc->dslot].los)
+				signal_state_up(dch, L1_SIGNAL_LOS_ON,
+				    "LOS detected");
+			if (temp && !hc->chan[hc->dslot].los)
+				signal_state_up(dch, L1_SIGNAL_LOS_OFF,
+				    "LOS gone");
+			hc->chan[hc->dslot].los = temp;
+		}
+		if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) {
+			/* AIS */
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS;
+			if (!temp && hc->chan[hc->dslot].ais)
+				signal_state_up(dch, L1_SIGNAL_AIS_ON,
+				    "AIS detected");
+			if (temp && !hc->chan[hc->dslot].ais)
+				signal_state_up(dch, L1_SIGNAL_AIS_OFF,
+				    "AIS gone");
+			hc->chan[hc->dslot].ais = temp;
+		}
+		if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) {
+			/* SLIP */
+			temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX;
+			if (!temp && hc->chan[hc->dslot].slip_rx)
+				signal_state_up(dch, L1_SIGNAL_SLIP_RX,
+				    " bit SLIP detected RX");
+			hc->chan[hc->dslot].slip_rx = temp;
+			temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX;
+			if (!temp && hc->chan[hc->dslot].slip_tx)
+				signal_state_up(dch, L1_SIGNAL_SLIP_TX,
+				    " bit SLIP detected TX");
+			hc->chan[hc->dslot].slip_tx = temp;
+		}
+		if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) {
+			/* RDI */
+			temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A;
+			if (!temp && hc->chan[hc->dslot].rdi)
+				signal_state_up(dch, L1_SIGNAL_RDI_ON,
+				    "RDI detected");
+			if (temp && !hc->chan[hc->dslot].rdi)
+				signal_state_up(dch, L1_SIGNAL_RDI_OFF,
+				    "RDI gone");
+			hc->chan[hc->dslot].rdi = temp;
+		}
+		temp = HFC_inb_nodebug(hc, R_JATT_DIR);
+		switch (hc->chan[hc->dslot].sync) {
+		case 0:
+			if ((temp & 0x60) == 0x60) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 now "
+					    "in clock sync\n",
+					    __func__, hc->id);
+				HFC_outb(hc, R_RX_OFF,
+				    hc->chan[hc->dslot].jitter | V_RX_INIT);
+				HFC_outb(hc, R_TX_OFF,
+				    hc->chan[hc->dslot].jitter | V_RX_INIT);
+				hc->chan[hc->dslot].sync = 1;
+				goto check_framesync;
+			}
+			break;
+		case 1:
+			if ((temp & 0x60) != 0x60) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 "
+					    "lost clock sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 0;
+				break;
+			}
+check_framesync:
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA);
+			if (temp == 0x27) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 "
+					    "now in frame sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 2;
+			}
+			break;
+		case 2:
+			if ((temp & 0x60) != 0x60) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 lost "
+					    "clock & frame sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 0;
+				break;
+			}
+			temp = HFC_inb_nodebug(hc, R_SYNC_STA);
+			if (temp != 0x27) {
+				if (debug & DEBUG_HFCMULTI_SYNC)
+					printk(KERN_DEBUG
+					    "%s: (id=%d) E1 "
+					    "lost frame sync\n",
+					    __func__, hc->id);
+				hc->chan[hc->dslot].sync = 1;
+			}
+			break;
+		}
+	}
+
+	if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
+		hfcmulti_watchdog(hc);
+
+	if (hc->leds)
+		hfcmulti_leds(hc);
+}
+
+static void
+ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech)
+{
+	struct dchannel	*dch;
+	int		ch;
+	int		active;
+	u_char		st_status, temp;
+
+	/* state machine */
+	for (ch = 0; ch <= 31; ch++) {
+		if (hc->chan[ch].dch) {
+			dch = hc->chan[ch].dch;
+			if (r_irq_statech & 1) {
+				HFC_outb_nodebug(hc, R_ST_SEL,
+					hc->chan[ch].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				/* undocumented: status changes during read */
+				st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE);
+				while (st_status != (temp =
+					HFC_inb_nodebug(hc, A_ST_RD_STATE))) {
+					if (debug & DEBUG_HFCMULTI_STATE)
+						printk(KERN_DEBUG "%s: reread "
+						    "STATE because %d!=%d\n",
+						    __func__, temp,
+						    st_status);
+					st_status = temp; /* repeat */
+				}
+
+				/* Speech Design TE-sync indication */
+				if (test_bit(HFC_CHIP_PLXSD, &hc->chip) &&
+					dch->dev.D.protocol == ISDN_P_TE_S0) {
+					if (st_status & V_FR_SYNC_ST)
+						hc->syncronized |=
+						    (1 << hc->chan[ch].port);
+					else
+						hc->syncronized &=
+						   ~(1 << hc->chan[ch].port);
+				}
+				dch->state = st_status & 0x0f;
+				if (dch->dev.D.protocol == ISDN_P_NT_S0)
+					active = 3;
+				else
+					active = 7;
+				if (dch->state == active) {
+					HFC_outb_nodebug(hc, R_FIFO,
+						(ch << 1) | 1);
+					HFC_wait_nodebug(hc);
+					HFC_outb_nodebug(hc,
+						R_INC_RES_FIFO, V_RES_F);
+					HFC_wait_nodebug(hc);
+					dch->tx_idx = 0;
+				}
+				schedule_event(dch, FLG_PHCHANGE);
+				if (debug & DEBUG_HFCMULTI_STATE)
+					printk(KERN_DEBUG
+					    "%s: S/T newstate %x port %d\n",
+					    __func__, dch->state,
+					    hc->chan[ch].port);
+			}
+			r_irq_statech >>= 1;
+		}
+	}
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+		plxsd_checksync(hc, 0);
+}
+
+static void
+fifo_irq(struct hfc_multi *hc, int block)
+{
+	int	ch, j;
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	u_char r_irq_fifo_bl;
+
+	r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block);
+	j = 0;
+	while (j < 8) {
+		ch = (block << 2) + (j >> 1);
+		dch = hc->chan[ch].dch;
+		bch = hc->chan[ch].bch;
+		if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) {
+			j += 2;
+			continue;
+		}
+		if (dch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &dch->Flags)) {
+			hfcmulti_tx(hc, ch);
+			/* start fifo */
+			HFC_outb_nodebug(hc, R_FIFO, 0);
+			HFC_wait_nodebug(hc);
+		}
+		if (bch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &bch->Flags)) {
+			hfcmulti_tx(hc, ch);
+			/* start fifo */
+			HFC_outb_nodebug(hc, R_FIFO, 0);
+			HFC_wait_nodebug(hc);
+		}
+		j++;
+		if (dch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &dch->Flags)) {
+			hfcmulti_rx(hc, ch);
+		}
+		if (bch && (r_irq_fifo_bl & (1 << j)) &&
+		    test_bit(FLG_ACTIVE, &bch->Flags)) {
+			hfcmulti_rx(hc, ch);
+		}
+		j++;
+	}
+}
+
+#ifdef IRQ_DEBUG
+int irqsem;
+#endif
+static irqreturn_t
+hfcmulti_interrupt(int intno, void *dev_id)
+{
+#ifdef IRQCOUNT_DEBUG
+	static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
+	    iq5 = 0, iq6 = 0, iqcnt = 0;
+#endif
+	static int		count;
+	struct hfc_multi	*hc = dev_id;
+	struct dchannel		*dch;
+	u_char			r_irq_statech, status, r_irq_misc, r_irq_oview;
+	int			i;
+	u_short			*plx_acc, wval;
+	u_char			e1_syncsta, temp;
+	u_long			flags;
+
+	if (!hc) {
+		printk(KERN_ERR "HFC-multi: Spurious interrupt!\n");
+		return IRQ_NONE;
+	}
+
+	spin_lock(&hc->lock);
+
+#ifdef IRQ_DEBUG
+	if (irqsem)
+		printk(KERN_ERR "irq for card %d during irq from "
+		"card %d, this is no bug.\n", hc->id + 1, irqsem);
+	irqsem = hc->id + 1;
+#endif
+
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, flags);
+		plx_acc = (u_short *)(hc->plx_membase + PLX_INTCSR);
+		wval = readw(plx_acc);
+		spin_unlock_irqrestore(&plx_lock, flags);
+		if (!(wval & PLX_INTCSR_LINTI1_STATUS))
+			goto irq_notforus;
+	}
+
+	status = HFC_inb_nodebug(hc, R_STATUS);
+	r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH);
+#ifdef IRQCOUNT_DEBUG
+	if (r_irq_statech)
+		iq1++;
+	if (status & V_DTMF_STA)
+		iq2++;
+	if (status & V_LOST_STA)
+		iq3++;
+	if (status & V_EXT_IRQSTA)
+		iq4++;
+	if (status & V_MISC_IRQSTA)
+		iq5++;
+	if (status & V_FR_IRQSTA)
+		iq6++;
+	if (iqcnt++ > 5000) {
+		printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n",
+		    iq1, iq2, iq3, iq4, iq5, iq6);
+		iqcnt = 0;
+	}
+#endif
+	if (!r_irq_statech &&
+	    !(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
+	    V_MISC_IRQSTA | V_FR_IRQSTA))) {
+		/* irq is not for us */
+		goto irq_notforus;
+	}
+	hc->irqcnt++;
+	if (r_irq_statech) {
+		if (hc->type != 1)
+			ph_state_irq(hc, r_irq_statech);
+	}
+	if (status & V_EXT_IRQSTA)
+		; /* external IRQ */
+	if (status & V_LOST_STA) {
+		/* LOST IRQ */
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */
+	}
+	if (status & V_MISC_IRQSTA) {
+		/* misc IRQ */
+		r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
+		if (r_irq_misc & V_STA_IRQ) {
+			if (hc->type == 1) {
+				/* state machine */
+				dch = hc->chan[hc->dslot].dch;
+				e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
+				if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
+				 && hc->e1_getclock) {
+					if (e1_syncsta & V_FR_SYNC_E1)
+						hc->syncronized = 1;
+					else
+						hc->syncronized = 0;
+				}
+				/* undocumented: status changes during read */
+				dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA);
+				while (dch->state != (temp =
+					HFC_inb_nodebug(hc, R_E1_RD_STA))) {
+					if (debug & DEBUG_HFCMULTI_STATE)
+						printk(KERN_DEBUG "%s: reread "
+						    "STATE because %d!=%d\n",
+						    __func__, temp,
+						    dch->state);
+					dch->state = temp; /* repeat */
+				}
+				dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA)
+					& 0x7;
+				schedule_event(dch, FLG_PHCHANGE);
+				if (debug & DEBUG_HFCMULTI_STATE)
+					printk(KERN_DEBUG
+					    "%s: E1 (id=%d) newstate %x\n",
+					    __func__, hc->id, dch->state);
+				if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
+					plxsd_checksync(hc, 0);
+			}
+		}
+		if (r_irq_misc & V_TI_IRQ)
+			handle_timer_irq(hc);
+
+		if (r_irq_misc & V_DTMF_IRQ) {
+			/* -> DTMF IRQ */
+			hfcmulti_dtmf(hc);
+		}
+		/* TODO: REPLACE !!!! 125 us Interrupts are not acceptable  */
+		if (r_irq_misc & V_IRQ_PROC) {
+			/* IRQ every 125us */
+			count++;
+			/* generate 1kHz signal */
+			if (count == 8) {
+				if (hfc_interrupt)
+					hfc_interrupt();
+				count = 0;
+			}
+		}
+
+	}
+	if (status & V_FR_IRQSTA) {
+		/* FIFO IRQ */
+		r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW);
+		for (i = 0; i < 8; i++) {
+			if (r_irq_oview & (1 << i))
+				fifo_irq(hc, i);
+		}
+	}
+
+#ifdef IRQ_DEBUG
+	irqsem = 0;
+#endif
+	spin_unlock(&hc->lock);
+	return IRQ_HANDLED;
+
+irq_notforus:
+#ifdef IRQ_DEBUG
+	irqsem = 0;
+#endif
+	spin_unlock(&hc->lock);
+	return IRQ_NONE;
+}
+
+
+/*
+ * timer callback for D-chan busy resolution. Currently no function
+ */
+
+static void
+hfcmulti_dbusy_timer(struct hfc_multi *hc)
+{
+}
+
+
+/*
+ * activate/deactivate hardware for selected channels and mode
+ *
+ * configure B-channel with the given protocol
+ * ch eqals to the HFC-channel (0-31)
+ * ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31
+ * for S/T, 1-31 for E1)
+ * the hdlc interrupts will be set/unset
+ */
+static int
+mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
+    int bank_tx, int slot_rx, int bank_rx)
+{
+	int flow_tx = 0, flow_rx = 0, routing = 0;
+	int oslot_tx, oslot_rx;
+	int conf;
+
+	if (ch < 0 || ch > 31)
+		return EINVAL;
+	oslot_tx = hc->chan[ch].slot_tx;
+	oslot_rx = hc->chan[ch].slot_rx;
+	conf = hc->chan[ch].conf;
+
+	if (debug & DEBUG_HFCMULTI_MODE)
+		printk(KERN_DEBUG
+		    "%s: card %d channel %d protocol %x slot old=%d new=%d "
+		    "bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n",
+		    __func__, hc->id, ch, protocol, oslot_tx, slot_tx,
+		    bank_tx, oslot_rx, slot_rx, bank_rx);
+
+	if (oslot_tx >= 0 && slot_tx != oslot_tx) {
+		/* remove from slot */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: remove from slot %d (TX)\n",
+			    __func__, oslot_tx);
+		if (hc->slot_owner[oslot_tx<<1] == ch) {
+			HFC_outb(hc, R_SLOT, oslot_tx << 1);
+			HFC_outb(hc, A_SL_CFG, 0);
+			HFC_outb(hc, A_CONF, 0);
+			hc->slot_owner[oslot_tx<<1] = -1;
+		} else {
+			if (debug & DEBUG_HFCMULTI_MODE)
+				printk(KERN_DEBUG
+				    "%s: we are not owner of this tx slot "
+				    "anymore, channel %d is.\n",
+				    __func__, hc->slot_owner[oslot_tx<<1]);
+		}
+	}
+
+	if (oslot_rx >= 0 && slot_rx != oslot_rx) {
+		/* remove from slot */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG
+			    "%s: remove from slot %d (RX)\n",
+			    __func__, oslot_rx);
+		if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) {
+			HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR);
+			HFC_outb(hc, A_SL_CFG, 0);
+			hc->slot_owner[(oslot_rx << 1) | 1] = -1;
+		} else {
+			if (debug & DEBUG_HFCMULTI_MODE)
+				printk(KERN_DEBUG
+				    "%s: we are not owner of this rx slot "
+				    "anymore, channel %d is.\n",
+				    __func__,
+				    hc->slot_owner[(oslot_rx << 1) | 1]);
+		}
+	}
+
+	if (slot_tx < 0) {
+		flow_tx = 0x80; /* FIFO->ST */
+		/* disable pcm slot */
+		hc->chan[ch].slot_tx = -1;
+		hc->chan[ch].bank_tx = 0;
+	} else {
+		/* set pcm slot */
+		if (hc->chan[ch].txpending)
+			flow_tx = 0x80; /* FIFO->ST */
+		else
+			flow_tx = 0xc0; /* PCM->ST */
+		/* put on slot */
+		routing = bank_tx ? 0xc0 : 0x80;
+		if (conf >= 0 || bank_tx > 1)
+			routing = 0x40; /* loop */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
+			    " %d flow %02x routing %02x conf %d (TX)\n",
+			    __func__, ch, slot_tx, bank_tx,
+			    flow_tx, routing, conf);
+		HFC_outb(hc, R_SLOT, slot_tx << 1);
+		HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
+		HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
+		hc->slot_owner[slot_tx << 1] = ch;
+		hc->chan[ch].slot_tx = slot_tx;
+		hc->chan[ch].bank_tx = bank_tx;
+	}
+	if (slot_rx < 0) {
+		/* disable pcm slot */
+		flow_rx = 0x80; /* ST->FIFO */
+		hc->chan[ch].slot_rx = -1;
+		hc->chan[ch].bank_rx = 0;
+	} else {
+		/* set pcm slot */
+		if (hc->chan[ch].txpending)
+			flow_rx = 0x80; /* ST->FIFO */
+		else
+			flow_rx = 0xc0; /* ST->(FIFO,PCM) */
+		/* put on slot */
+		routing = bank_rx?0x80:0xc0; /* reversed */
+		if (conf >= 0 || bank_rx > 1)
+			routing = 0x40; /* loop */
+		if (debug & DEBUG_HFCMULTI_MODE)
+			printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
+			    " %d flow %02x routing %02x conf %d (RX)\n",
+			    __func__, ch, slot_rx, bank_rx,
+			    flow_rx, routing, conf);
+		HFC_outb(hc, R_SLOT, (slot_rx<<1) | V_SL_DIR);
+		HFC_outb(hc, A_SL_CFG, (ch<<1) | V_CH_DIR | routing);
+		hc->slot_owner[(slot_rx<<1)|1] = ch;
+		hc->chan[ch].slot_rx = slot_rx;
+		hc->chan[ch].bank_rx = bank_rx;
+	}
+
+	switch (protocol) {
+	case (ISDN_P_NONE):
+		/* disable TX fifo */
+		HFC_outb(hc, R_FIFO, ch << 1);
+		HFC_wait(hc);
+		HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF);
+		HFC_outb(hc, A_SUBCH_CFG, 0);
+		HFC_outb(hc, A_IRQ_MSK, 0);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		/* disable RX fifo */
+		HFC_outb(hc, R_FIFO, (ch<<1)|1);
+		HFC_wait(hc);
+		HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00);
+		HFC_outb(hc, A_SUBCH_CFG, 0);
+		HFC_outb(hc, A_IRQ_MSK, 0);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		if (hc->chan[ch].bch && hc->type != 1) {
+			hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
+			    ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
+			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_CTRL0,
+			    hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+		}
+		if (hc->chan[ch].bch) {
+			test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
+			test_and_clear_bit(FLG_TRANSPARENT,
+			    &hc->chan[ch].bch->Flags);
+		}
+		break;
+	case (ISDN_P_B_RAW): /* B-channel */
+
+		if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
+		    (hc->chan[ch].slot_rx < 0) &&
+		    (hc->chan[ch].slot_tx < 0)) {
+
+			printk(KERN_DEBUG
+			    "Setting B-channel %d to echo cancelable "
+			    "state on PCM slot %d\n", ch,
+			    ((ch / 4) * 8) + ((ch % 4) * 4) + 1);
+			printk(KERN_DEBUG
+			    "Enabling pass through for channel\n");
+			vpm_out(hc, ch, ((ch / 4) * 8) +
+			    ((ch % 4) * 4) + 1, 0x01);
+			/* rx path */
+			/* S/T -> PCM */
+			HFC_outb(hc, R_FIFO, (ch << 1));
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
+			    ((ch % 4) * 4) + 1) << 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1));
+
+			/* PCM -> FIFO */
+			HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+			HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
+			    ((ch % 4) * 4) + 1) << 1) | 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1);
+
+			/* tx path */
+			/* PCM -> S/T */
+			HFC_outb(hc, R_FIFO, (ch << 1) | 1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
+			    ((ch % 4) * 4)) << 1) | 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1);
+
+			/* FIFO -> PCM */
+			HFC_outb(hc, R_FIFO, 0x20 | (ch << 1));
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+			/* tx silence */
+			HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+			HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
+			    ((ch % 4) * 4)) << 1);
+			HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
+		} else {
+			/* enable TX fifo */
+			HFC_outb(hc, R_FIFO, ch << 1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
+			    V_HDLC_TRP | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+			/* tx silence */
+			HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+			/* enable RX fifo */
+			HFC_outb(hc, R_FIFO, (ch<<1)|1);
+			HFC_wait(hc);
+			HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+			HFC_outb(hc, A_IRQ_MSK, 0);
+			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait(hc);
+		}
+		if (hc->type != 1) {
+			hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
+			    ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
+			HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_CTRL0,
+			    hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+		}
+		if (hc->chan[ch].bch)
+			test_and_set_bit(FLG_TRANSPARENT,
+			    &hc->chan[ch].bch->Flags);
+		break;
+	case (ISDN_P_B_HDLC): /* B-channel */
+	case (ISDN_P_TE_S0): /* D-channel */
+	case (ISDN_P_NT_S0):
+	case (ISDN_P_TE_E1):
+	case (ISDN_P_NT_E1):
+		/* enable TX fifo */
+		HFC_outb(hc, R_FIFO, ch<<1);
+		HFC_wait(hc);
+		if (hc->type == 1 || hc->chan[ch].bch) {
+			/* E1 or B-channel */
+			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
+			HFC_outb(hc, A_SUBCH_CFG, 0);
+		} else {
+			/* D-Channel without HDLC fill flags */
+			HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF);
+			HFC_outb(hc, A_SUBCH_CFG, 2);
+		}
+		HFC_outb(hc, A_IRQ_MSK, V_IRQ);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		/* enable RX fifo */
+		HFC_outb(hc, R_FIFO, (ch<<1)|1);
+		HFC_wait(hc);
+		HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
+		if (hc->type == 1 || hc->chan[ch].bch)
+			HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
+		else
+			HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
+		HFC_outb(hc, A_IRQ_MSK, V_IRQ);
+		HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+		HFC_wait(hc);
+		if (hc->chan[ch].bch) {
+			test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
+			if (hc->type != 1) {
+				hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
+				  ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
+				HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				HFC_outb(hc, A_ST_CTRL0,
+				  hc->hw.a_st_ctrl0[hc->chan[ch].port]);
+			}
+		}
+		break;
+	default:
+		printk(KERN_DEBUG "%s: protocol not known %x\n",
+		    __func__, protocol);
+		hc->chan[ch].protocol = ISDN_P_NONE;
+		return -ENOPROTOOPT;
+	}
+	hc->chan[ch].protocol = protocol;
+	return 0;
+}
+
+
+/*
+ * connect/disconnect PCM
+ */
+
+static void
+hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
+    int slot_rx, int bank_rx)
+{
+	if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
+		/* disable PCM */
+		mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
+		return;
+	}
+
+	/* enable pcm */
+	mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx,
+		slot_rx, bank_rx);
+}
+
+/*
+ * set/disable conference
+ */
+
+static void
+hfcmulti_conf(struct hfc_multi *hc, int ch, int num)
+{
+	if (num >= 0 && num <= 7)
+		hc->chan[ch].conf = num;
+	else
+		hc->chan[ch].conf = -1;
+	mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx,
+	    hc->chan[ch].bank_tx, hc->chan[ch].slot_rx,
+	    hc->chan[ch].bank_rx);
+}
+
+
+/*
+ * set/disable sample loop
+ */
+
+/* NOTE: this function is experimental and therefore disabled */
+
+/*
+ * Layer 1 callback function
+ */
+static int
+hfcm_l1callback(struct dchannel *dch, u_int cmd)
+{
+	struct hfc_multi	*hc = dch->hw;
+	u_long	flags;
+
+	switch (cmd) {
+	case INFO3_P8:
+	case INFO3_P10:
+		break;
+	case HW_RESET_REQ:
+		/* start activation */
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->type == 1) {
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: HW_RESET_REQ no BRI\n",
+				    __func__);
+		} else {
+			HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */
+			udelay(6); /* wait at least 5,21us */
+			HFC_outb(hc, A_ST_WR_STATE, 3);
+			HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT*3));
+				/* activate */
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		l1_event(dch->l1, HW_POWERUP_IND);
+		break;
+	case HW_DEACT_REQ:
+		/* start deactivation */
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->type == 1) {
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: HW_DEACT_REQ no BRI\n",
+				    __func__);
+		} else {
+			HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT*2);
+				/* deactivate */
+			if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+				hc->syncronized &=
+				   ~(1 << hc->chan[dch->slot].port);
+				plxsd_checksync(hc, 0);
+			}
+		}
+		skb_queue_purge(&dch->squeue);
+		if (dch->tx_skb) {
+			dev_kfree_skb(dch->tx_skb);
+			dch->tx_skb = NULL;
+		}
+		dch->tx_idx = 0;
+		if (dch->rx_skb) {
+			dev_kfree_skb(dch->rx_skb);
+			dch->rx_skb = NULL;
+		}
+		test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+		if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+			del_timer(&dch->timer);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case HW_POWERUP_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		if (hc->type == 1) {
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: HW_POWERUP_REQ no BRI\n",
+				    __func__);
+		} else {
+			HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
+			/* undocumented: delay after R_ST_SEL */
+			udelay(1);
+			HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */
+			udelay(6); /* wait at least 5,21us */
+			HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case PH_ACTIVATE_IND:
+		test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	case PH_DEACTIVATE_IND:
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
+			GFP_ATOMIC);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * Layer2 -> Layer 1 Transfer
+ */
+
+static int
+handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_multi	*hc = dch->hw;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	int			ret = -EINVAL;
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (skb->len < 1)
+			break;
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = dchannel_senddata(dch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcmulti_tx(hc, dch->slot);
+			ret = 0;
+			/* start fifo */
+			HFC_outb(hc, R_FIFO, 0);
+			HFC_wait(hc);
+			spin_unlock_irqrestore(&hc->lock, flags);
+			queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+			spin_lock_irqsave(&hc->lock, flags);
+			ret = 0;
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: PH_ACTIVATE port %d (0..%d)\n",
+				    __func__, hc->chan[dch->slot].port,
+				    hc->ports-1);
+			/* start activation */
+			if (hc->type == 1) {
+				ph_state_change(dch);
+				if (debug & DEBUG_HFCMULTI_STATE)
+					printk(KERN_DEBUG
+					    "%s: E1 report state %x \n",
+					    __func__, dch->state);
+			} else {
+				HFC_outb(hc, R_ST_SEL,
+				    hc->chan[dch->slot].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1);
+				    /* G1 */
+				udelay(6); /* wait at least 5,21us */
+				HFC_outb(hc, A_ST_WR_STATE, 1);
+				HFC_outb(hc, A_ST_WR_STATE, 1 |
+				    (V_ST_ACT*3)); /* activate */
+				dch->state = 1;
+			}
+			spin_unlock_irqrestore(&hc->lock, flags);
+		} else
+			ret = l1_event(dch->l1, hh->prim);
+		break;
+	case PH_DEACTIVATE_REQ:
+		test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
+		if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+			spin_lock_irqsave(&hc->lock, flags);
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG
+				    "%s: PH_DEACTIVATE port %d (0..%d)\n",
+				    __func__, hc->chan[dch->slot].port,
+				    hc->ports-1);
+			/* start deactivation */
+			if (hc->type == 1) {
+				if (debug & DEBUG_HFCMULTI_MSG)
+					printk(KERN_DEBUG
+					    "%s: PH_DEACTIVATE no BRI\n",
+					    __func__);
+			} else {
+				HFC_outb(hc, R_ST_SEL,
+				    hc->chan[dch->slot].port);
+				/* undocumented: delay after R_ST_SEL */
+				udelay(1);
+				HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2);
+				    /* deactivate */
+				dch->state = 1;
+			}
+			skb_queue_purge(&dch->squeue);
+			if (dch->tx_skb) {
+				dev_kfree_skb(dch->tx_skb);
+				dch->tx_skb = NULL;
+			}
+			dch->tx_idx = 0;
+			if (dch->rx_skb) {
+				dev_kfree_skb(dch->rx_skb);
+				dch->rx_skb = NULL;
+			}
+			test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
+			if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
+				del_timer(&dch->timer);
+#ifdef FIXME
+			if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
+				dchannel_sched_event(&hc->dch, D_CLEARBUSY);
+#endif
+			ret = 0;
+			spin_unlock_irqrestore(&hc->lock, flags);
+		} else
+			ret = l1_event(dch->l1, hh->prim);
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static void
+deactivate_bchannel(struct bchannel *bch)
+{
+	struct hfc_multi	*hc = bch->hw;
+	u_long			flags;
+
+	spin_lock_irqsave(&hc->lock, flags);
+	if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
+		dev_kfree_skb(bch->next_skb);
+		bch->next_skb = NULL;
+	}
+	if (bch->tx_skb) {
+		dev_kfree_skb(bch->tx_skb);
+		bch->tx_skb = NULL;
+	}
+	bch->tx_idx = 0;
+	if (bch->rx_skb) {
+		dev_kfree_skb(bch->rx_skb);
+		bch->rx_skb = NULL;
+	}
+	hc->chan[bch->slot].coeff_count = 0;
+	test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+	test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
+	hc->chan[bch->slot].rx_off = 0;
+	hc->chan[bch->slot].conf = -1;
+	mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
+	spin_unlock_irqrestore(&hc->lock, flags);
+}
+
+static int
+handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_multi	*hc = bch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	unsigned int		id;
+	u_long			flags;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (!skb->len)
+			break;
+		spin_lock_irqsave(&hc->lock, flags);
+		ret = bchannel_senddata(bch, skb);
+		if (ret > 0) { /* direct TX */
+			id = hh->id; /* skb can be freed */
+			hfcmulti_tx(hc, bch->slot);
+			ret = 0;
+			/* start fifo */
+			HFC_outb_nodebug(hc, R_FIFO, 0);
+			HFC_wait_nodebug(hc);
+			if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) {
+				spin_unlock_irqrestore(&hc->lock, flags);
+				queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
+			} else
+				spin_unlock_irqrestore(&hc->lock, flags);
+		} else
+			spin_unlock_irqrestore(&hc->lock, flags);
+		return ret;
+	case PH_ACTIVATE_REQ:
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n",
+				__func__, bch->slot);
+		spin_lock_irqsave(&hc->lock, flags);
+		/* activate B-channel if not already activated */
+		if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
+			hc->chan[bch->slot].txpending = 0;
+			ret = mode_hfcmulti(hc, bch->slot,
+				ch->protocol,
+				hc->chan[bch->slot].slot_tx,
+				hc->chan[bch->slot].bank_tx,
+				hc->chan[bch->slot].slot_rx,
+				hc->chan[bch->slot].bank_rx);
+			if (!ret) {
+				if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf
+					&& test_bit(HFC_CHIP_DTMF, &hc->chip)) {
+					/* start decoder */
+					hc->dtmf = 1;
+					if (debug & DEBUG_HFCMULTI_DTMF)
+						printk(KERN_DEBUG
+						    "%s: start dtmf decoder\n",
+							__func__);
+					HFC_outb(hc, R_DTMF, hc->hw.r_dtmf |
+					    V_RST_DTMF);
+				}
+			}
+		} else
+			ret = 0;
+		spin_unlock_irqrestore(&hc->lock, flags);
+		if (!ret)
+			_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
+				GFP_KERNEL);
+		break;
+	case PH_CONTROL_REQ:
+		spin_lock_irqsave(&hc->lock, flags);
+		switch (hh->id) {
+		case HFC_SPL_LOOP_ON: /* set sample loop */
+			if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG
+			    "%s: HFC_SPL_LOOP_ON (len = %d)\n",
+			    __func__, skb->len);
+			ret = 0;
+			break;
+		case HFC_SPL_LOOP_OFF: /* set silence */
+			if (debug & DEBUG_HFCMULTI_MSG)
+				printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n",
+				    __func__);
+			ret = 0;
+			break;
+		default:
+			printk(KERN_ERR
+			     "%s: unknown PH_CONTROL_REQ info %x\n",
+			     __func__, hh->id);
+			ret = -EINVAL;
+		}
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	case PH_DEACTIVATE_REQ:
+		deactivate_bchannel(bch); /* locked there */
+		_queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
+			GFP_KERNEL);
+		ret = 0;
+		break;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+/*
+ * bchannel control function
+ */
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+	int			ret = 0;
+	struct dsp_features	*features =
+		(struct dsp_features *)(*((u_long *)&cq->p1));
+	struct hfc_multi	*hc = bch->hw;
+	int			slot_tx;
+	int			bank_tx;
+	int			slot_rx;
+	int			bank_rx;
+	int			num;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
+			| MISDN_CTRL_RX_OFF;
+		break;
+	case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
+		hc->chan[bch->slot].rx_off = !!cq->p1;
+		if (!hc->chan[bch->slot].rx_off) {
+			/* reset fifo on rx on */
+			HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1);
+			HFC_wait_nodebug(hc);
+			HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
+			HFC_wait_nodebug(hc);
+		}
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
+			    __func__, bch->nr, hc->chan[bch->slot].rx_off);
+		break;
+	case MISDN_CTRL_HW_FEATURES: /* fill features structure */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HW_FEATURE request\n",
+			    __func__);
+		/* create confirm */
+		features->hfc_id = hc->id;
+		if (test_bit(HFC_CHIP_DTMF, &hc->chip))
+			features->hfc_dtmf = 1;
+		features->hfc_loops = 0;
+		if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
+			features->hfc_echocanhw = 1;
+		} else {
+			features->pcm_id = hc->pcm;
+			features->pcm_slots = hc->slots;
+			features->pcm_banks = 2;
+		}
+		break;
+	case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */
+		slot_tx = cq->p1 & 0xff;
+		bank_tx = cq->p1 >> 8;
+		slot_rx = cq->p2 & 0xff;
+		bank_rx = cq->p2 >> 8;
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG
+			    "%s: HFC_PCM_CONN slot %d bank %d (TX) "
+			    "slot %d bank %d (RX)\n",
+			    __func__, slot_tx, bank_tx,
+			    slot_rx, bank_rx);
+		if (slot_tx < hc->slots && bank_tx <= 2 &&
+		    slot_rx < hc->slots && bank_rx <= 2)
+			hfcmulti_pcm(hc, bch->slot,
+			    slot_tx, bank_tx, slot_rx, bank_rx);
+		else {
+			printk(KERN_WARNING
+			    "%s: HFC_PCM_CONN slot %d bank %d (TX) "
+			    "slot %d bank %d (RX) out of range\n",
+			    __func__, slot_tx, bank_tx,
+			    slot_rx, bank_rx);
+			ret = -EINVAL;
+		}
+		break;
+	case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_PCM_DISC\n",
+			    __func__);
+		hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0);
+		break;
+	case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */
+		num = cq->p1 & 0xff;
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n",
+			    __func__, num);
+		if (num <= 7)
+			hfcmulti_conf(hc, bch->slot, num);
+		else {
+			printk(KERN_WARNING
+			    "%s: HW_CONF_JOIN conf %d out of range\n",
+			    __func__, num);
+			ret = -EINVAL;
+		}
+		break;
+	case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__);
+		hfcmulti_conf(hc, bch->slot, -1);
+		break;
+	case MISDN_CTRL_HFC_ECHOCAN_ON:
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__);
+		if (test_bit(HFC_CHIP_B410P, &hc->chip))
+			vpm_echocan_on(hc, bch->slot, cq->p1);
+		else
+			ret = -EINVAL;
+		break;
+
+	case MISDN_CTRL_HFC_ECHOCAN_OFF:
+		if (debug & DEBUG_HFCMULTI_MSG)
+			printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n",
+				__func__);
+		if (test_bit(HFC_CHIP_B410P, &hc->chip))
+			vpm_echocan_off(hc, bch->slot);
+		else
+			ret = -EINVAL;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct hfc_multi	*hc = bch->hw;
+	int			err = -EINVAL;
+	u_long	flags;
+
+	if (bch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case CLOSE_CHANNEL:
+		test_and_clear_bit(FLG_OPEN, &bch->Flags);
+		if (test_bit(FLG_ACTIVE, &bch->Flags))
+			deactivate_bchannel(bch); /* locked there */
+		ch->protocol = ISDN_P_NONE;
+		ch->peer = NULL;
+		module_put(THIS_MODULE);
+		err = 0;
+		break;
+	case CONTROL_CHANNEL:
+		spin_lock_irqsave(&hc->lock, flags);
+		err = channel_bctrl(bch, arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown prim(%x)\n",
+			__func__, cmd);
+	}
+	return err;
+}
+
+/*
+ * handle D-channel events
+ *
+ * handle state change event
+ */
+static void
+ph_state_change(struct dchannel *dch)
+{
+	struct hfc_multi *hc = dch->hw;
+	int ch, i;
+
+	if (!dch) {
+		printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
+		    __func__);
+		return;
+	}
+	ch = dch->slot;
+
+	if (hc->type == 1) {
+		if (dch->dev.D.protocol == ISDN_P_TE_E1) {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG
+				    "%s: E1 TE (id=%d) newstate %x\n",
+				    __func__, hc->id, dch->state);
+		} else {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG
+				    "%s: E1 NT (id=%d) newstate %x\n",
+				    __func__, hc->id, dch->state);
+		}
+		switch (dch->state) {
+		case (1):
+			if (hc->e1_state != 1) {
+			    for (i = 1; i <= 31; i++) {
+				/* reset fifos on e1 activation */
+				HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
+				HFC_wait_nodebug(hc);
+				HFC_outb_nodebug(hc,
+					R_INC_RES_FIFO, V_RES_F);
+				HFC_wait_nodebug(hc);
+			    }
+			}
+			test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+			_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+			    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+			break;
+
+		default:
+			if (hc->e1_state != 1)
+				return;
+			test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+			_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+			    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+		}
+		hc->e1_state = dch->state;
+	} else {
+		if (dch->dev.D.protocol == ISDN_P_TE_S0) {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG
+				    "%s: S/T TE newstate %x\n",
+				    __func__, dch->state);
+			switch (dch->state) {
+			case (0):
+				l1_event(dch->l1, HW_RESET_IND);
+				break;
+			case (3):
+				l1_event(dch->l1, HW_DEACT_IND);
+				break;
+			case (5):
+			case (8):
+				l1_event(dch->l1, ANYSIGNAL);
+				break;
+			case (6):
+				l1_event(dch->l1, INFO2);
+				break;
+			case (7):
+				l1_event(dch->l1, INFO4_P8);
+				break;
+			}
+		} else {
+			if (debug & DEBUG_HFCMULTI_STATE)
+				printk(KERN_DEBUG "%s: S/T NT newstate %x\n",
+				    __func__, dch->state);
+			switch (dch->state) {
+			case (2):
+				if (hc->chan[ch].nt_timer == 0) {
+					hc->chan[ch].nt_timer = -1;
+					HFC_outb(hc, R_ST_SEL,
+					    hc->chan[ch].port);
+					/* undocumented: delay after R_ST_SEL */
+					udelay(1);
+					HFC_outb(hc, A_ST_WR_STATE, 4 |
+					    V_ST_LD_STA); /* G4 */
+					udelay(6); /* wait at least 5,21us */
+					HFC_outb(hc, A_ST_WR_STATE, 4);
+					dch->state = 4;
+				} else {
+					/* one extra count for the next event */
+					hc->chan[ch].nt_timer =
+					    nt_t1_count[poll_timer] + 1;
+					HFC_outb(hc, R_ST_SEL,
+					    hc->chan[ch].port);
+					/* undocumented: delay after R_ST_SEL */
+					udelay(1);
+					/* allow G2 -> G3 transition */
+					HFC_outb(hc, A_ST_WR_STATE, 2 |
+					    V_SET_G2_G3);
+				}
+				break;
+			case (1):
+				hc->chan[ch].nt_timer = -1;
+				test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+				_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
+				    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+				break;
+			case (4):
+				hc->chan[ch].nt_timer = -1;
+				break;
+			case (3):
+				hc->chan[ch].nt_timer = -1;
+				test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+				_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
+				    MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
+				break;
+			}
+		}
+	}
+}
+
+/*
+ * called for card mode init message
+ */
+
+static void
+hfcmulti_initmode(struct dchannel *dch)
+{
+	struct hfc_multi *hc = dch->hw;
+	u_char		a_st_wr_state, r_e1_wr_sta;
+	int		i, pt;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+
+	if (hc->type == 1) {
+		hc->chan[hc->dslot].slot_tx = -1;
+		hc->chan[hc->dslot].slot_rx = -1;
+		hc->chan[hc->dslot].conf = -1;
+		if (hc->dslot) {
+			mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol,
+				-1, 0, -1, 0);
+			dch->timer.function = (void *) hfcmulti_dbusy_timer;
+			dch->timer.data = (long) dch;
+			init_timer(&dch->timer);
+		}
+		for (i = 1; i <= 31; i++) {
+			if (i == hc->dslot)
+				continue;
+			hc->chan[i].slot_tx = -1;
+			hc->chan[i].slot_rx = -1;
+			hc->chan[i].conf = -1;
+			mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0);
+		}
+		/* E1 */
+		if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
+			HFC_outb(hc, R_LOS0, 255); /* 2 ms */
+			HFC_outb(hc, R_LOS1, 255); /* 512 ms */
+		}
+		if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) {
+			HFC_outb(hc, R_RX0, 0);
+			hc->hw.r_tx0 = 0 | V_OUT_EN;
+		} else {
+			HFC_outb(hc, R_RX0, 1);
+			hc->hw.r_tx0 = 1 | V_OUT_EN;
+		}
+		hc->hw.r_tx1 = V_ATX | V_NTRI;
+		HFC_outb(hc, R_TX0, hc->hw.r_tx0);
+		HFC_outb(hc, R_TX1, hc->hw.r_tx1);
+		HFC_outb(hc, R_TX_FR0, 0x00);
+		HFC_outb(hc, R_TX_FR1, 0xf8);
+
+		if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
+			HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E);
+
+		HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0);
+
+		if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
+			HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC);
+
+		if (dch->dev.D.protocol == ISDN_P_NT_E1) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG "%s: E1 port is NT-mode\n",
+				    __func__);
+			r_e1_wr_sta = 0; /* G0 */
+			hc->e1_getclock = 0;
+		} else {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG "%s: E1 port is TE-mode\n",
+				    __func__);
+			r_e1_wr_sta = 0; /* F0 */
+			hc->e1_getclock = 1;
+		}
+		if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
+			HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
+		else
+			HFC_outb(hc, R_SYNC_OUT, 0);
+		if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip))
+			hc->e1_getclock = 1;
+		if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip))
+			hc->e1_getclock = 0;
+		if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+			/* SLAVE (clock master) */
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: E1 port is clock master "
+				    "(clock from PCM)\n", __func__);
+			HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC);
+		} else {
+			if (hc->e1_getclock) {
+				/* MASTER (clock slave) */
+				if (debug & DEBUG_HFCMULTI_INIT)
+					printk(KERN_DEBUG
+					    "%s: E1 port is clock slave "
+					    "(clock to PCM)\n", __func__);
+				HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
+			} else {
+				/* MASTER (clock master) */
+				if (debug & DEBUG_HFCMULTI_INIT)
+					printk(KERN_DEBUG "%s: E1 port is "
+					    "clock master "
+					    "(clock from QUARTZ)\n",
+					    __func__);
+				HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC |
+				    V_PCM_SYNC | V_JATT_OFF);
+				HFC_outb(hc, R_SYNC_OUT, 0);
+			}
+		}
+		HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */
+		HFC_outb(hc, R_PWM_MD, V_PWM0_MD);
+		HFC_outb(hc, R_PWM0, 0x50);
+		HFC_outb(hc, R_PWM1, 0xff);
+		/* state machine setup */
+		HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA);
+		udelay(6); /* wait at least 5,21us */
+		HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta);
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized = 0;
+			plxsd_checksync(hc, 0);
+		}
+	} else {
+		i = dch->slot;
+		hc->chan[i].slot_tx = -1;
+		hc->chan[i].slot_rx = -1;
+		hc->chan[i].conf = -1;
+		mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0);
+		dch->timer.function = (void *)hfcmulti_dbusy_timer;
+		dch->timer.data = (long) dch;
+		init_timer(&dch->timer);
+		hc->chan[i - 2].slot_tx = -1;
+		hc->chan[i - 2].slot_rx = -1;
+		hc->chan[i - 2].conf = -1;
+		mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0);
+		hc->chan[i - 1].slot_tx = -1;
+		hc->chan[i - 1].slot_rx = -1;
+		hc->chan[i - 1].conf = -1;
+		mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0);
+		/* ST */
+		pt = hc->chan[i].port;
+		/* select interface */
+		HFC_outb(hc, R_ST_SEL, pt);
+		/* undocumented: delay after R_ST_SEL */
+		udelay(1);
+		if (dch->dev.D.protocol == ISDN_P_NT_S0) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: ST port %d is NT-mode\n",
+				    __func__, pt);
+			/* clock delay */
+			HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt);
+			a_st_wr_state = 1; /* G1 */
+			hc->hw.a_st_ctrl0[pt] = V_ST_MD;
+		} else {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: ST port %d is TE-mode\n",
+				    __func__, pt);
+			/* clock delay */
+			HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te);
+			a_st_wr_state = 2; /* F2 */
+			hc->hw.a_st_ctrl0[pt] = 0;
+		}
+		if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
+			hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
+		/* line setup */
+		HFC_outb(hc, A_ST_CTRL0,  hc->hw.a_st_ctrl0[pt]);
+		/* disable E-channel */
+		if ((dch->dev.D.protocol == ISDN_P_NT_S0) ||
+		    test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg))
+			HFC_outb(hc, A_ST_CTRL1, V_E_IGNO);
+		else
+			HFC_outb(hc, A_ST_CTRL1, 0);
+		/* enable B-channel receive */
+		HFC_outb(hc, A_ST_CTRL2,  V_B1_RX_EN | V_B2_RX_EN);
+		/* state machine setup */
+		HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA);
+		udelay(6); /* wait at least 5,21us */
+		HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state);
+		hc->hw.r_sci_msk |= 1 << pt;
+		/* state machine interrupts */
+		HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk);
+		/* unset sync on port */
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized &=
+			   ~(1 << hc->chan[dch->slot].port);
+			plxsd_checksync(hc, 0);
+		}
+	}
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk("%s: done\n", __func__);
+}
+
+
+static int
+open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
+    struct channel_req *rq)
+{
+	int	err = 0;
+	u_long	flags;
+
+	if (debug & DEBUG_HW_OPEN)
+		printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
+		    dch->dev.id, __builtin_return_address(0));
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if ((dch->dev.D.protocol != ISDN_P_NONE) &&
+	    (dch->dev.D.protocol != rq->protocol)) {
+	    if (debug & DEBUG_HFCMULTI_MODE)
+		printk(KERN_WARNING "%s: change protocol %x to %x\n",
+		    __func__, dch->dev.D.protocol, rq->protocol);
+	}
+	if ((dch->dev.D.protocol == ISDN_P_TE_S0)
+	 && (rq->protocol != ISDN_P_TE_S0))
+		l1_event(dch->l1, CLOSE_CHANNEL);
+	if (dch->dev.D.protocol != rq->protocol) {
+		if (rq->protocol == ISDN_P_TE_S0) {
+			err = create_l1(dch, hfcm_l1callback);
+			if (err)
+				return err;
+		}
+		dch->dev.D.protocol = rq->protocol;
+		spin_lock_irqsave(&hc->lock, flags);
+		hfcmulti_initmode(dch);
+		spin_unlock_irqrestore(&hc->lock, flags);
+	}
+
+	if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) ||
+	    ((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) ||
+	    ((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) ||
+	    ((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) {
+		_queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
+		    0, NULL, GFP_KERNEL);
+	}
+	rq->ch = &dch->dev.D;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+static int
+open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
+    struct channel_req *rq)
+{
+	struct bchannel	*bch;
+	int		ch;
+
+	if (!test_bit(rq->adr.channel, &dch->dev.channelmap[0]))
+		return -EINVAL;
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if (hc->type == 1)
+		ch = rq->adr.channel;
+	else
+		ch = (rq->adr.channel - 1) + (dch->slot - 2);
+	bch = hc->chan[ch].bch;
+	if (!bch) {
+		printk(KERN_ERR "%s:internal error ch %d has no bch\n",
+		    __func__, ch);
+		return -EINVAL;
+	}
+	if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+		return -EBUSY; /* b-channel can be only open once */
+	bch->ch.protocol = rq->protocol;
+	hc->chan[ch].rx_off = 0;
+	rq->ch = &bch->ch;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+/*
+ * device control function
+ */
+static int
+channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
+{
+	int	ret = 0;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = 0;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct hfc_multi	*hc = dch->hw;
+	struct channel_req	*rq;
+	int			err = 0;
+	u_long			flags;
+
+	if (dch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		rq = arg;
+		switch (rq->protocol) {
+		case ISDN_P_TE_S0:
+		case ISDN_P_NT_S0:
+			if (hc->type == 1) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq); /* locked there */
+			break;
+		case ISDN_P_TE_E1:
+		case ISDN_P_NT_E1:
+			if (hc->type != 1) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq); /* locked there */
+			break;
+		default:
+			spin_lock_irqsave(&hc->lock, flags);
+			err = open_bchannel(hc, dch, rq);
+			spin_unlock_irqrestore(&hc->lock, flags);
+		}
+		break;
+	case CLOSE_CHANNEL:
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
+			    __func__, dch->dev.id,
+			    __builtin_return_address(0));
+		module_put(THIS_MODULE);
+		break;
+	case CONTROL_CHANNEL:
+		spin_lock_irqsave(&hc->lock, flags);
+		err = channel_dctrl(dch, arg);
+		spin_unlock_irqrestore(&hc->lock, flags);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		err = -EINVAL;
+	}
+	return err;
+}
+
+/*
+ * initialize the card
+ */
+
+/*
+ * start timer irq, wait some time and check if we have interrupts.
+ * if not, reset chip and try again.
+ */
+static int
+init_card(struct hfc_multi *hc)
+{
+	int	err = -EIO;
+	u_long	flags;
+	u_short	*plx_acc;
+	u_long	plx_flags;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered\n", __func__);
+
+	spin_lock_irqsave(&hc->lock, flags);
+	/* set interrupts but leave global interrupt disabled */
+	hc->hw.r_irq_ctrl = V_FIFO_IRQ;
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+
+	if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
+	    "HFC-multi", hc)) {
+		printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
+		    hc->pci_dev->irq);
+		return -EIO;
+	}
+	hc->irq = hc->pci_dev->irq;
+
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+		writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE),
+			plx_acc); /* enable PCI & LINT1 irq */
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: IRQ %d count %d\n",
+		    __func__, hc->irq, hc->irqcnt);
+	err = init_chip(hc);
+	if (err)
+		goto error;
+	/*
+	 * Finally enable IRQ output
+	 * this is only allowed, if an IRQ routine is allready
+	 * established for this HFC, so don't do that earlier
+	 */
+	spin_lock_irqsave(&hc->lock, flags);
+	enable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	/* printk(KERN_DEBUG "no master irq set!!!\n"); */
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout((100*HZ)/1000); /* Timeout 100ms */
+	/* turn IRQ off until chip is completely initialized */
+	spin_lock_irqsave(&hc->lock, flags);
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: IRQ %d count %d\n",
+		    __func__, hc->irq, hc->irqcnt);
+	if (hc->irqcnt) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: done\n", __func__);
+
+		return 0;
+	}
+	if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
+		printk(KERN_INFO "ignoring missing interrupts\n");
+		return 0;
+	}
+
+	printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n",
+		hc->irq);
+
+	err = -EIO;
+
+error:
+	if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+		spin_lock_irqsave(&plx_lock, plx_flags);
+		plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+		writew(0x00, plx_acc); /*disable IRQs*/
+		spin_unlock_irqrestore(&plx_lock, plx_flags);
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
+	if (hc->irq) {
+		free_irq(hc->irq, hc);
+		hc->irq = 0;
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err);
+	return err;
+}
+
+/*
+ * find pci device and set it up
+ */
+
+static int
+setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	struct hm_map	*m = (struct hm_map *)ent->driver_data;
+
+	printk(KERN_INFO
+	    "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
+	    m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
+
+	hc->pci_dev = pdev;
+	if (m->clock2)
+		test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
+
+	if (ent->device == 0xB410) {
+		test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
+		test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
+		test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+		hc->slots = 32;
+	}
+
+	if (hc->pci_dev->irq <= 0) {
+		printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n");
+		return -EIO;
+	}
+	if (pci_enable_device(hc->pci_dev)) {
+		printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n");
+		return -EIO;
+	}
+	hc->leds = m->leds;
+	hc->ledstate = 0xAFFEAFFE;
+	hc->opticalsupport = m->opticalsupport;
+
+	/* set memory access methods */
+	if (m->io_mode) /* use mode from card config */
+		hc->io_mode = m->io_mode;
+	switch (hc->io_mode) {
+	case HFC_IO_MODE_PLXSD:
+		test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
+		hc->slots = 128; /* required */
+		/* fall through */
+	case HFC_IO_MODE_PCIMEM:
+		hc->HFC_outb = HFC_outb_pcimem;
+		hc->HFC_inb = HFC_inb_pcimem;
+		hc->HFC_inw = HFC_inw_pcimem;
+		hc->HFC_wait = HFC_wait_pcimem;
+		hc->read_fifo = read_fifo_pcimem;
+		hc->write_fifo = write_fifo_pcimem;
+		break;
+	case HFC_IO_MODE_REGIO:
+		hc->HFC_outb = HFC_outb_regio;
+		hc->HFC_inb = HFC_inb_regio;
+		hc->HFC_inw = HFC_inw_regio;
+		hc->HFC_wait = HFC_wait_regio;
+		hc->read_fifo = read_fifo_regio;
+		hc->write_fifo = write_fifo_regio;
+		break;
+	default:
+		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+		pci_disable_device(hc->pci_dev);
+		return -EIO;
+	}
+	hc->HFC_outb_nodebug = hc->HFC_outb;
+	hc->HFC_inb_nodebug = hc->HFC_inb;
+	hc->HFC_inw_nodebug = hc->HFC_inw;
+	hc->HFC_wait_nodebug = hc->HFC_wait;
+#ifdef HFC_REGISTER_DEBUG
+	hc->HFC_outb = HFC_outb_debug;
+	hc->HFC_inb = HFC_inb_debug;
+	hc->HFC_inw = HFC_inw_debug;
+	hc->HFC_wait = HFC_wait_debug;
+#endif
+	hc->pci_iobase = 0;
+	hc->pci_membase = NULL;
+	hc->plx_membase = NULL;
+
+	switch (hc->io_mode) {
+	case HFC_IO_MODE_PLXSD:
+		hc->plx_origmembase =  hc->pci_dev->resource[0].start;
+		/* MEMBASE 1 is PLX PCI Bridge */
+
+		if (!hc->plx_origmembase) {
+			printk(KERN_WARNING
+			  "HFC-multi: No IO-Memory for PCI PLX bridge found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		hc->plx_membase = ioremap(hc->plx_origmembase, 0x80);
+		if (!hc->plx_membase) {
+			printk(KERN_WARNING
+			    "HFC-multi: failed to remap plx address space. "
+			    "(internal error)\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+		printk(KERN_INFO
+		    "HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n",
+		    (u_long)hc->plx_membase, hc->plx_origmembase);
+
+		hc->pci_origmembase =  hc->pci_dev->resource[2].start;
+		    /* MEMBASE 1 is PLX PCI Bridge */
+		if (!hc->pci_origmembase) {
+			printk(KERN_WARNING
+			    "HFC-multi: No IO-Memory for PCI card found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		hc->pci_membase = ioremap(hc->pci_origmembase, 0x400);
+		if (!hc->pci_membase) {
+			printk(KERN_WARNING "HFC-multi: failed to remap io "
+			    "address space. (internal error)\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		printk(KERN_INFO
+		    "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d "
+		    "leds-type %d\n",
+		    hc->id, (u_long)hc->pci_membase, hc->pci_origmembase,
+		    hc->pci_dev->irq, HZ, hc->leds);
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
+		break;
+	case HFC_IO_MODE_PCIMEM:
+		hc->pci_origmembase = hc->pci_dev->resource[1].start;
+		if (!hc->pci_origmembase) {
+			printk(KERN_WARNING
+			    "HFC-multi: No IO-Memory for PCI card found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		hc->pci_membase = ioremap(hc->pci_origmembase, 256);
+		if (!hc->pci_membase) {
+			printk(KERN_WARNING
+			    "HFC-multi: failed to remap io address space. "
+			    "(internal error)\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+		printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
+		    "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
+		    hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
+		break;
+	case HFC_IO_MODE_REGIO:
+		hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
+		if (!hc->pci_iobase) {
+			printk(KERN_WARNING
+				"HFC-multi: No IO for PCI card found\n");
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		if (!request_region(hc->pci_iobase, 8, "hfcmulti")) {
+			printk(KERN_WARNING "HFC-multi: failed to request "
+			    "address space at 0x%08lx (internal error)\n",
+			    hc->pci_iobase);
+			pci_disable_device(hc->pci_dev);
+			return -EIO;
+		}
+
+		printk(KERN_INFO
+		    "%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n",
+		    m->vendor_name, m->card_name, (u_int) hc->pci_iobase,
+		    hc->pci_dev->irq, HZ, hc->leds);
+		pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO);
+		break;
+	default:
+		printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
+		pci_disable_device(hc->pci_dev);
+		return -EIO;
+	}
+
+	pci_set_drvdata(hc->pci_dev, hc);
+
+	/* At this point the needed PCI config is done */
+	/* fifos are still not enabled */
+	return 0;
+}
+
+
+/*
+ * remove port
+ */
+
+static void
+release_port(struct hfc_multi *hc, struct dchannel *dch)
+{
+	int	pt, ci, i = 0;
+	u_long	flags;
+	struct bchannel *pb;
+
+	ci = dch->slot;
+	pt = hc->chan[ci].port;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: entered for port %d\n",
+			__func__, pt + 1);
+
+	if (pt >= hc->ports) {
+		printk(KERN_WARNING "%s: ERROR port out of range (%d).\n",
+		     __func__, pt + 1);
+		return;
+	}
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: releasing port=%d\n",
+		    __func__, pt + 1);
+
+	if (dch->dev.D.protocol == ISDN_P_TE_S0)
+		l1_event(dch->l1, CLOSE_CHANNEL);
+
+	hc->chan[ci].dch = NULL;
+
+	if (hc->created[pt]) {
+		hc->created[pt] = 0;
+		mISDN_unregister_device(&dch->dev);
+	}
+
+	spin_lock_irqsave(&hc->lock, flags);
+
+	if (dch->timer.function) {
+		del_timer(&dch->timer);
+		dch->timer.function = NULL;
+	}
+
+	if (hc->type == 1) { /* E1 */
+		/* remove sync */
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized = 0;
+			plxsd_checksync(hc, 1);
+		}
+		/* free channels */
+		for (i = 0; i <= 31; i++) {
+			if (hc->chan[i].bch) {
+				if (debug & DEBUG_HFCMULTI_INIT)
+					printk(KERN_DEBUG
+					    "%s: free port %d channel %d\n",
+					    __func__, hc->chan[i].port+1, i);
+				pb = hc->chan[i].bch;
+				hc->chan[i].bch = NULL;
+				spin_unlock_irqrestore(&hc->lock, flags);
+				mISDN_freebchannel(pb);
+				kfree(pb);
+				kfree(hc->chan[i].coeff);
+				spin_lock_irqsave(&hc->lock, flags);
+			}
+		}
+	} else {
+		/* remove sync */
+		if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+			hc->syncronized &=
+			   ~(1 << hc->chan[ci].port);
+			plxsd_checksync(hc, 1);
+		}
+		/* free channels */
+		if (hc->chan[ci - 2].bch) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: free port %d channel %d\n",
+				    __func__, hc->chan[ci - 2].port+1,
+				    ci - 2);
+			pb = hc->chan[ci - 2].bch;
+			hc->chan[ci - 2].bch = NULL;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			mISDN_freebchannel(pb);
+			kfree(pb);
+			kfree(hc->chan[ci - 2].coeff);
+			spin_lock_irqsave(&hc->lock, flags);
+		}
+		if (hc->chan[ci - 1].bch) {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: free port %d channel %d\n",
+				    __func__, hc->chan[ci - 1].port+1,
+				    ci - 1);
+			pb = hc->chan[ci - 1].bch;
+			hc->chan[ci - 1].bch = NULL;
+			spin_unlock_irqrestore(&hc->lock, flags);
+			mISDN_freebchannel(pb);
+			kfree(pb);
+			kfree(hc->chan[ci - 1].coeff);
+			spin_lock_irqsave(&hc->lock, flags);
+		}
+	}
+
+	spin_unlock_irqrestore(&hc->lock, flags);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt);
+	mISDN_freedchannel(dch);
+	kfree(dch);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: done!\n", __func__);
+}
+
+static void
+release_card(struct hfc_multi *hc)
+{
+	u_long	flags;
+	int	ch;
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: release card (%d) entered\n",
+		    __func__, hc->id);
+
+	spin_lock_irqsave(&hc->lock, flags);
+	disable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+
+	udelay(1000);
+
+	/* dimm leds */
+	if (hc->leds)
+		hfcmulti_leds(hc);
+
+	/* disable D-channels & B-channels */
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: disable all channels (d and b)\n",
+		    __func__);
+	for (ch = 0; ch <= 31; ch++) {
+		if (hc->chan[ch].dch)
+			release_port(hc, hc->chan[ch].dch);
+	}
+
+	/* release hardware & irq */
+	if (hc->irq) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_WARNING "%s: free irq %d\n",
+			    __func__, hc->irq);
+		free_irq(hc->irq, hc);
+		hc->irq = 0;
+
+	}
+	release_io_hfcmulti(hc);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: remove instance from list\n",
+		     __func__);
+	list_del(&hc->list);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: delete instance\n", __func__);
+	if (hc == syncmaster)
+		syncmaster = NULL;
+	kfree(hc);
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_WARNING "%s: card successfully removed\n",
+		    __func__);
+}
+
+static int
+init_e1_port(struct hfc_multi *hc, struct hm_map *m)
+{
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	int		ch, ret = 0;
+	char		name[MISDN_MAX_IDLEN];
+
+	dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+	if (!dch)
+		return -ENOMEM;
+	dch->debug = debug;
+	mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
+	dch->hw = hc;
+	dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
+	dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	dch->dev.D.send = handle_dmsg;
+	dch->dev.D.ctrl = hfcm_dctrl;
+	dch->dev.nrbchan = (hc->dslot)?30:31;
+	dch->slot = hc->dslot;
+	hc->chan[hc->dslot].dch = dch;
+	hc->chan[hc->dslot].port = 0;
+	hc->chan[hc->dslot].nt_timer = -1;
+	for (ch = 1; ch <= 31; ch++) {
+		if (ch == hc->dslot) /* skip dchannel */
+			continue;
+		bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+		if (!bch) {
+			printk(KERN_ERR "%s: no memory for bchannel\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL);
+		if (!hc->chan[ch].coeff) {
+			printk(KERN_ERR "%s: no memory for coeffs\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		bch->nr = ch;
+		bch->slot = ch;
+		bch->debug = debug;
+		mISDN_initbchannel(bch, MAX_DATA_MEM);
+		bch->hw = hc;
+		bch->ch.send = handle_bmsg;
+		bch->ch.ctrl = hfcm_bctrl;
+		bch->ch.nr = ch;
+		list_add(&bch->ch.list, &dch->dev.bchannels);
+		hc->chan[ch].bch = bch;
+		hc->chan[ch].port = 0;
+		test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
+	}
+	/* set optical line type */
+	if (port[Port_cnt] & 0x001) {
+		if (!m->opticalsupport)  {
+			printk(KERN_INFO
+			    "This board has no optical "
+			    "support\n");
+		} else {
+			if (debug & DEBUG_HFCMULTI_INIT)
+				printk(KERN_DEBUG
+				    "%s: PORT set optical "
+				    "interfacs: card(%d) "
+				    "port(%d)\n",
+				    __func__,
+				    HFC_cnt + 1, 1);
+			test_and_set_bit(HFC_CFG_OPTICAL,
+			    &hc->chan[hc->dslot].cfg);
+		}
+	}
+	/* set LOS report */
+	if (port[Port_cnt] & 0x004) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT set "
+			    "LOS report: card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_LOS,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set AIS report */
+	if (port[Port_cnt] & 0x008) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT set "
+			    "AIS report: card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_AIS,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set SLIP report */
+	if (port[Port_cnt] & 0x010) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PORT set SLIP report: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_SLIP,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set RDI report */
+	if (port[Port_cnt] & 0x020) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PORT set RDI report: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_REPORT_RDI,
+		    &hc->chan[hc->dslot].cfg);
+	}
+	/* set CRC-4 Mode */
+	if (!(port[Port_cnt] & 0x100)) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT turn on CRC4 report:"
+				" card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CFG_CRC4,
+		    &hc->chan[hc->dslot].cfg);
+	} else {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT turn off CRC4"
+				" report: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+	}
+	/* set forced clock */
+	if (port[Port_cnt] & 0x0200) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT force getting clock from "
+				"E1: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip);
+	} else
+	if (port[Port_cnt] & 0x0400) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT force putting clock to "
+				"E1: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip);
+	}
+	/* set JATT PLL */
+	if (port[Port_cnt] & 0x0800) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG "%s: PORT disable JATT PLL on "
+				"E1: card(%d) port(%d)\n",
+				__func__, HFC_cnt + 1, 1);
+		test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip);
+	}
+	/* set elastic jitter buffer */
+	if (port[Port_cnt] & 0x3000) {
+		hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3;
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PORT set elastic "
+			    "buffer to %d: card(%d) port(%d)\n",
+			    __func__, hc->chan[hc->dslot].jitter,
+			    HFC_cnt + 1, 1);
+	} else
+		hc->chan[hc->dslot].jitter = 2; /* default */
+	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
+	ret = mISDN_register_device(&dch->dev, name);
+	if (ret)
+		goto free_chan;
+	hc->created[0] = 1;
+	return ret;
+free_chan:
+	release_port(hc, dch);
+	return ret;
+}
+
+static int
+init_multi_port(struct hfc_multi *hc, int pt)
+{
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	int		ch, i, ret = 0;
+	char		name[MISDN_MAX_IDLEN];
+
+	dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+	if (!dch)
+		return -ENOMEM;
+	dch->debug = debug;
+	mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
+	dch->hw = hc;
+	dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
+	dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	dch->dev.D.send = handle_dmsg;
+	dch->dev.D.ctrl = hfcm_dctrl;
+	dch->dev.nrbchan = 2;
+	i = pt << 2;
+	dch->slot = i + 2;
+	hc->chan[i + 2].dch = dch;
+	hc->chan[i + 2].port = pt;
+	hc->chan[i + 2].nt_timer = -1;
+	for (ch = 0; ch < dch->dev.nrbchan; ch++) {
+		bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+		if (!bch) {
+			printk(KERN_ERR "%s: no memory for bchannel\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL);
+		if (!hc->chan[i + ch].coeff) {
+			printk(KERN_ERR "%s: no memory for coeffs\n",
+			    __func__);
+			ret = -ENOMEM;
+			goto free_chan;
+		}
+		bch->nr = ch + 1;
+		bch->slot = i + ch;
+		bch->debug = debug;
+		mISDN_initbchannel(bch, MAX_DATA_MEM);
+		bch->hw = hc;
+		bch->ch.send = handle_bmsg;
+		bch->ch.ctrl = hfcm_bctrl;
+		bch->ch.nr = ch + 1;
+		list_add(&bch->ch.list, &dch->dev.bchannels);
+		hc->chan[i + ch].bch = bch;
+		hc->chan[i + ch].port = pt;
+		test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
+	}
+	/* set master clock */
+	if (port[Port_cnt] & 0x001) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PROTOCOL set master clock: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, pt + 1);
+		if (dch->dev.D.protocol != ISDN_P_TE_S0) {
+			printk(KERN_ERR "Error: Master clock "
+			    "for port(%d) of card(%d) is only"
+			    " possible with TE-mode\n",
+			    pt + 1, HFC_cnt + 1);
+			ret = -EINVAL;
+			goto free_chan;
+		}
+		if (hc->masterclk >= 0) {
+			printk(KERN_ERR "Error: Master clock "
+			    "for port(%d) of card(%d) already "
+			    "defined for port(%d)\n",
+			    pt + 1, HFC_cnt + 1, hc->masterclk+1);
+			ret = -EINVAL;
+			goto free_chan;
+		}
+		hc->masterclk = pt;
+	}
+	/* set transmitter line to non capacitive */
+	if (port[Port_cnt] & 0x002) {
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PROTOCOL set non capacitive "
+			    "transmitter: card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, pt + 1);
+		test_and_set_bit(HFC_CFG_NONCAP_TX,
+		    &hc->chan[i + 2].cfg);
+	}
+	/* disable E-channel */
+	if (port[Port_cnt] & 0x004) {
+	if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: PROTOCOL disable E-channel: "
+			    "card(%d) port(%d)\n",
+			    __func__, HFC_cnt + 1, pt + 1);
+		test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
+		    &hc->chan[i + 2].cfg);
+	}
+	snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d/%d",
+		hc->type, HFC_cnt + 1, pt + 1);
+	ret = mISDN_register_device(&dch->dev, name);
+	if (ret)
+		goto free_chan;
+	hc->created[pt] = 1;
+	return ret;
+free_chan:
+	release_port(hc, dch);
+	return ret;
+}
+
+static int
+hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct hm_map	*m = (struct hm_map *)ent->driver_data;
+	int		ret_err = 0;
+	int		pt;
+	struct hfc_multi	*hc;
+	u_long		flags;
+	u_char		dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
+
+	if (HFC_cnt >= MAX_CARDS) {
+		printk(KERN_ERR "too many cards (max=%d).\n",
+			MAX_CARDS);
+		return -EINVAL;
+	}
+	if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) {
+		printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but "
+		    "type[%d] %d was supplied as module parameter\n",
+		    m->vendor_name, m->card_name, m->type, HFC_cnt,
+		    type[HFC_cnt] & 0xff);
+		printk(KERN_WARNING "HFC-MULTI: Load module without parameters "
+			"first, to see cards and their types.");
+		return -EINVAL;
+	}
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n",
+		    __func__, m->vendor_name, m->card_name, m->type,
+		    type[HFC_cnt]);
+
+	/* allocate card+fifo structure */
+	hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL);
+	if (!hc) {
+		printk(KERN_ERR "No kmem for HFC-Multi card\n");
+		return -ENOMEM;
+	}
+	spin_lock_init(&hc->lock);
+	hc->mtyp = m;
+	hc->type =  m->type;
+	hc->ports = m->ports;
+	hc->id = HFC_cnt;
+	hc->pcm = pcm[HFC_cnt];
+	hc->io_mode = iomode[HFC_cnt];
+	if (dslot[HFC_cnt] < 0) {
+		hc->dslot = 0;
+		printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
+			"31 B-channels\n");
+	} if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32) {
+		hc->dslot = dslot[HFC_cnt];
+		printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
+			"time slot %d\n", dslot[HFC_cnt]);
+	} else
+		hc->dslot = 16;
+
+	/* set chip specific features */
+	hc->masterclk = -1;
+	if (type[HFC_cnt] & 0x100) {
+		test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
+		silence = 0xff; /* ulaw silence */
+	} else
+		silence = 0x2a; /* alaw silence */
+	if (!(type[HFC_cnt] & 0x200))
+		test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+
+	if (type[HFC_cnt] & 0x800)
+		test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+	if (type[HFC_cnt] & 0x1000) {
+		test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
+		test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
+	}
+	if (type[HFC_cnt] & 0x4000)
+		test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip);
+	if (type[HFC_cnt] & 0x8000)
+		test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip);
+	hc->slots = 32;
+	if (type[HFC_cnt] & 0x10000)
+		hc->slots = 64;
+	if (type[HFC_cnt] & 0x20000)
+		hc->slots = 128;
+	if (type[HFC_cnt] & 0x80000) {
+		test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip);
+		hc->wdcount = 0;
+		hc->wdbyte = V_GPIO_OUT2;
+		printk(KERN_NOTICE "Watchdog enabled\n");
+	}
+
+	/* setup pci, hc->slots may change due to PLXSD */
+	ret_err = setup_pci(hc, pdev, ent);
+	if (ret_err) {
+		if (hc == syncmaster)
+			syncmaster = NULL;
+		kfree(hc);
+		return ret_err;
+	}
+
+	/* crate channels */
+	for (pt = 0; pt < hc->ports; pt++) {
+		if (Port_cnt >= MAX_PORTS) {
+			printk(KERN_ERR "too many ports (max=%d).\n",
+				MAX_PORTS);
+			ret_err = -EINVAL;
+			goto free_card;
+		}
+		if (hc->type == 1)
+			ret_err = init_e1_port(hc, m);
+		else
+			ret_err = init_multi_port(hc, pt);
+		if (debug & DEBUG_HFCMULTI_INIT)
+			printk(KERN_DEBUG
+			    "%s: Registering D-channel, card(%d) port(%d)"
+			    "result %d\n",
+			    __func__, HFC_cnt + 1, pt, ret_err);
+
+		if (ret_err) {
+			while (pt) { /* release already registered ports */
+				pt--;
+				release_port(hc, hc->chan[(pt << 2) + 2].dch);
+			}
+			goto free_card;
+		}
+		Port_cnt++;
+	}
+
+	/* disp switches */
+	switch (m->dip_type) {
+	case DIP_4S:
+		/*
+		 * get DIP Setting for beroNet 1S/2S/4S cards
+		 *  check if Port Jumper config matches
+		 * module param 'protocol'
+		 * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
+		 * GPI 19/23 (R_GPI_IN2))
+		 */
+		dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) |
+			((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) |
+			(~HFC_inb(hc, R_GPI_IN2) & 0x08);
+
+		/* Port mode (TE/NT) jumpers */
+		pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4)  & 0xf);
+
+		if (test_bit(HFC_CHIP_B410P, &hc->chip))
+			pmj = ~pmj & 0xf;
+
+		printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n",
+			m->vendor_name, m->card_name, dips, pmj);
+		break;
+	case DIP_8S:
+		/*
+		 * get DIP Setting for beroNet 8S0+ cards
+		 *
+		 * enable PCI auxbridge function
+		 */
+		HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
+		/* prepare access to auxport */
+		outw(0x4000, hc->pci_iobase + 4);
+		/*
+		 * some dummy reads are required to
+		 * read valid DIP switch data
+		 */
+		dips = inb(hc->pci_iobase);
+		dips = inb(hc->pci_iobase);
+		dips = inb(hc->pci_iobase);
+		dips = ~inb(hc->pci_iobase) & 0x3F;
+		outw(0x0, hc->pci_iobase + 4);
+		/* disable PCI auxbridge function */
+		HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
+		printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
+		    m->vendor_name, m->card_name, dips);
+		break;
+	case DIP_E1:
+		/*
+		 * get DIP Setting for beroNet E1 cards
+		 * DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0)
+		 */
+		dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0)>>4;
+		printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
+		    m->vendor_name, m->card_name, dips);
+		break;
+	}
+
+	/* add to list */
+	spin_lock_irqsave(&HFClock, flags);
+	list_add_tail(&hc->list, &HFClist);
+	spin_unlock_irqrestore(&HFClock, flags);
+
+	/* initialize hardware */
+	ret_err = init_card(hc);
+	if (ret_err) {
+		printk(KERN_ERR "init card returns %d\n", ret_err);
+		release_card(hc);
+		return ret_err;
+	}
+
+	/* start IRQ and return */
+	spin_lock_irqsave(&hc->lock, flags);
+	enable_hwirq(hc);
+	spin_unlock_irqrestore(&hc->lock, flags);
+	return 0;
+
+free_card:
+	release_io_hfcmulti(hc);
+	if (hc == syncmaster)
+		syncmaster = NULL;
+	kfree(hc);
+	return ret_err;
+}
+
+static void __devexit hfc_remove_pci(struct pci_dev *pdev)
+{
+	struct hfc_multi	*card = pci_get_drvdata(pdev);
+	u_long			flags;
+
+	if (debug)
+		printk(KERN_INFO "removing hfc_multi card vendor:%x "
+		    "device:%x subvendor:%x subdevice:%x\n",
+		    pdev->vendor, pdev->device,
+		    pdev->subsystem_vendor, pdev->subsystem_device);
+
+	if (card) {
+		spin_lock_irqsave(&HFClock, flags);
+		release_card(card);
+		spin_unlock_irqrestore(&HFClock, flags);
+	}  else {
+		if (debug)
+			printk(KERN_WARNING "%s: drvdata allready removed\n",
+			    __func__);
+	}
+}
+
+#define	VENDOR_CCD	"Cologne Chip AG"
+#define	VENDOR_BN	"beroNet GmbH"
+#define	VENDOR_DIG	"Digium Inc."
+#define VENDOR_JH	"Junghanns.NET GmbH"
+#define VENDOR_PRIM	"PrimuX"
+
+static const struct hm_map hfcm_map[] = {
+/*0*/	{VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
+/*1*/	{VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S},
+/*2*/	{VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
+/*3*/	{VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
+/*4*/	{VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
+/*5*/	{VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
+/*6*/	{VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, 0, 0},
+/*7*/	{VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
+/*8*/	{VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
+/*9*/	{VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
+/*10*/	{VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
+/*11*/	{VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
+
+/*12*/	{VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
+/*13*/	{VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
+		HFC_IO_MODE_REGIO},
+/*14*/	{VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
+/*15*/	{VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
+
+/*16*/	{VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
+/*17*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+/*18*/	{VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+
+/*19*/	{VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*20*/	{VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
+/*21*/	{VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*22*/	{VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+
+/*23*/	{VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
+/*24*/	{VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
+/*25*/	{VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
+
+/*26*/	{VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
+		HFC_IO_MODE_PLXSD},
+/*27*/	{VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
+		HFC_IO_MODE_PLXSD},
+/*28*/	{VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
+/*29*/	{VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
+/*30*/	{VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
+};
+
+#undef H
+#define H(x)	((unsigned long)&hfcm_map[x])
+static struct pci_device_id hfmultipci_ids[] __devinitdata = {
+
+	/* Cards with HFC-4S Chip */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */
+	{ PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S,
+		PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
+
+	/* Cards with HFC-8S Chip */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+	PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)},
+	    /* IOB8ST Recording */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST  */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST  */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
+
+
+	/* Cards with HFC-E1 Chip */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */
+
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */
+
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
+		PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0},
+	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, 0},
+	{0, }
+};
+#undef H
+
+MODULE_DEVICE_TABLE(pci, hfmultipci_ids);
+
+static int
+hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct hm_map	*m = (struct hm_map *)ent->driver_data;
+	int		ret;
+
+	if (m == NULL) {
+		if (ent->vendor == PCI_VENDOR_ID_CCD)
+			if (ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
+			    ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
+			    ent->device == PCI_DEVICE_ID_CCD_HFCE1)
+				printk(KERN_ERR
+				    "unknown HFC multiport controller "
+				    "(vendor:%x device:%x subvendor:%x "
+				    "subdevice:%x) Please contact the "
+				    "driver maintainer for support.\n",
+				    ent->vendor, ent->device,
+				    ent->subvendor, ent->subdevice);
+		return -ENODEV;
+	}
+	ret = hfcmulti_init(pdev, ent);
+	if (ret)
+		return ret;
+	HFC_cnt++;
+	printk(KERN_INFO "%d devices registered\n", HFC_cnt);
+	return 0;
+}
+
+static struct pci_driver hfcmultipci_driver = {
+	.name		= "hfc_multi",
+	.probe		= hfcmulti_probe,
+	.remove		= __devexit_p(hfc_remove_pci),
+	.id_table	= hfmultipci_ids,
+};
+
+static void __exit
+HFCmulti_cleanup(void)
+{
+	struct hfc_multi *card, *next;
+
+	/* unload interrupt function symbol */
+	if (hfc_interrupt)
+		symbol_put(ztdummy_extern_interrupt);
+	if (register_interrupt)
+		symbol_put(ztdummy_register_interrupt);
+	if (unregister_interrupt) {
+		if (interrupt_registered) {
+			interrupt_registered = 0;
+			unregister_interrupt();
+		}
+		symbol_put(ztdummy_unregister_interrupt);
+	}
+
+	list_for_each_entry_safe(card, next, &HFClist, list)
+		release_card(card);
+	/* get rid of all devices of this driver */
+	pci_unregister_driver(&hfcmultipci_driver);
+}
+
+static int __init
+HFCmulti_init(void)
+{
+	int err;
+
+#ifdef IRQ_DEBUG
+	printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
+#endif
+
+	spin_lock_init(&HFClock);
+	spin_lock_init(&plx_lock);
+
+	if (debug & DEBUG_HFCMULTI_INIT)
+		printk(KERN_DEBUG "%s: init entered\n", __func__);
+
+#ifdef __BIG_ENDIAN
+#error "not running on big endian machines now"
+#endif
+	hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
+	register_interrupt = symbol_get(ztdummy_register_interrupt);
+	unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
+	printk(KERN_INFO "mISDN: HFC-multi driver %s\n",
+	    hfcmulti_revision);
+
+	switch (poll) {
+	case 0:
+		poll_timer = 6;
+		poll = 128;
+		break;
+		/*
+		 * wenn dieses break nochmal verschwindet,
+		 * gibt es heisse ohren :-)
+		 * "without the break you will get hot ears ???"
+		 */
+	case 8:
+		poll_timer = 2;
+		break;
+	case 16:
+		poll_timer = 3;
+		break;
+	case 32:
+		poll_timer = 4;
+		break;
+	case 64:
+		poll_timer = 5;
+		break;
+	case 128:
+		poll_timer = 6;
+		break;
+	case 256:
+		poll_timer = 7;
+		break;
+	default:
+		printk(KERN_ERR
+		    "%s: Wrong poll value (%d).\n", __func__, poll);
+		err = -EINVAL;
+		return err;
+
+	}
+
+	err = pci_register_driver(&hfcmultipci_driver);
+	if (err < 0) {
+		printk(KERN_ERR "error registering pci driver: %x\n", err);
+		if (hfc_interrupt)
+			symbol_put(ztdummy_extern_interrupt);
+		if (register_interrupt)
+			symbol_put(ztdummy_register_interrupt);
+		if (unregister_interrupt) {
+			if (interrupt_registered) {
+				interrupt_registered = 0;
+				unregister_interrupt();
+			}
+			symbol_put(ztdummy_unregister_interrupt);
+		}
+		return err;
+	}
+	return 0;
+}
+
+
+module_init(HFCmulti_init);
+module_exit(HFCmulti_cleanup);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c3b1761aba2..ffe479ba077 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1832,7 +1832,13 @@
 #define PCI_DEVICE_ID_MOXA_C320		0x3200
 
 #define PCI_VENDOR_ID_CCD		0x1397
+#define PCI_DEVICE_ID_CCD_HFC4S		0x08B4
+#define PCI_SUBDEVICE_ID_CCD_PMX2S	0x1234
+#define PCI_DEVICE_ID_CCD_HFC8S		0x16B8
 #define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
+#define PCI_DEVICE_ID_CCD_HFCE1		0x30B1
+#define PCI_SUBDEVICE_ID_CCD_SPD4S	0x3136
+#define PCI_SUBDEVICE_ID_CCD_SPDE1	0x3137
 #define PCI_DEVICE_ID_CCD_B000		0xb000
 #define PCI_DEVICE_ID_CCD_B006		0xb006
 #define PCI_DEVICE_ID_CCD_B007		0xb007
@@ -1842,8 +1848,32 @@
 #define PCI_DEVICE_ID_CCD_B00B		0xb00b
 #define PCI_DEVICE_ID_CCD_B00C		0xb00c
 #define PCI_DEVICE_ID_CCD_B100		0xb100
+#define PCI_SUBDEVICE_ID_CCD_IOB4ST	0xB520
+#define PCI_SUBDEVICE_ID_CCD_IOB8STR	0xB521
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST	0xB522
+#define PCI_SUBDEVICE_ID_CCD_IOB1E1	0xB523
+#define PCI_SUBDEVICE_ID_CCD_SWYX4S	0xB540
+#define PCI_SUBDEVICE_ID_CCD_JH4S20	0xB550
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1	0xB552
+#define PCI_SUBDEVICE_ID_CCD_BN4S	0xB560
+#define PCI_SUBDEVICE_ID_CCD_BN8S	0xB562
+#define PCI_SUBDEVICE_ID_CCD_BNE1	0xB563
+#define PCI_SUBDEVICE_ID_CCD_BNE1D	0xB564
+#define PCI_SUBDEVICE_ID_CCD_BNE1DP	0xB565
+#define PCI_SUBDEVICE_ID_CCD_BN2S	0xB566
+#define PCI_SUBDEVICE_ID_CCD_BN1SM	0xB567
+#define PCI_SUBDEVICE_ID_CCD_BN4SM	0xB568
+#define PCI_SUBDEVICE_ID_CCD_BN2SM	0xB569
+#define PCI_SUBDEVICE_ID_CCD_BNE1M	0xB56A
+#define PCI_SUBDEVICE_ID_CCD_BN8SP	0xB56B
+#define PCI_SUBDEVICE_ID_CCD_HFC4S	0xB620
+#define PCI_SUBDEVICE_ID_CCD_HFC8S	0xB622
 #define PCI_DEVICE_ID_CCD_B700		0xb700
 #define PCI_DEVICE_ID_CCD_B701		0xb701
+#define PCI_SUBDEVICE_ID_CCD_HFCE1	0xC523
+#define PCI_SUBDEVICE_ID_CCD_OV2S	0xE884
+#define PCI_SUBDEVICE_ID_CCD_OV4S	0xE888
+#define PCI_SUBDEVICE_ID_CCD_OV8S	0xE998
 
 #define PCI_VENDOR_ID_EXAR		0x13a8
 #define PCI_DEVICE_ID_EXAR_XR17C152	0x0152
@@ -2523,6 +2553,9 @@
 
 #define PCI_VENDOR_ID_3COM_2		0xa727
 
+#define PCI_VENDOR_ID_DIGIUM		0xd161
+#define PCI_DEVICE_ID_DIGIUM_HFC4S	0xb410
+
 #define PCI_SUBVENDOR_ID_EXSYS		0xd84d
 #define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
 #define PCI_SUBDEVICE_ID_EXSYS_4055	0x4055
-- 
cgit v1.2.3


From 3712b42d4b1bec29a4232a6673bf2e6dcc5faa68 Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sun, 27 Jul 2008 02:02:10 +0200
Subject: Add layer1 over IP support

Implement a ISDN over IP tunnel to use mISDN hardware on
remote locations.

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/mISDN/Kconfig       |   19 +-
 drivers/isdn/mISDN/Makefile      |    2 +
 drivers/isdn/mISDN/l1oip.h       |   91 +++
 drivers/isdn/mISDN/l1oip_codec.c |  374 ++++++++++
 drivers/isdn/mISDN/l1oip_core.c  | 1518 ++++++++++++++++++++++++++++++++++++++
 5 files changed, 2003 insertions(+), 1 deletion(-)
 create mode 100644 drivers/isdn/mISDN/l1oip.h
 create mode 100644 drivers/isdn/mISDN/l1oip_codec.c
 create mode 100644 drivers/isdn/mISDN/l1oip_core.c

diff --git a/drivers/isdn/mISDN/Kconfig b/drivers/isdn/mISDN/Kconfig
index 6a97e86e7f2..4938355c407 100644
--- a/drivers/isdn/mISDN/Kconfig
+++ b/drivers/isdn/mISDN/Kconfig
@@ -23,5 +23,22 @@ config MISDN_DSP
 	  and get more informations about this module and it's usage.
 	  If unsure, say 'N'.
 
-	source "drivers/isdn/hardware/mISDN/Kconfig"
+config MISDN_L1OIP
+	tristate "ISDN over IP tunnel"
+	depends on MISDN
+	help
+	  Enable support for ISDN over IP tunnel.
+
+	  It features:
+	    - dynamic IP exchange, if one or both peers have dynamic IPs
+	    - BRI (S0) and PRI (S2M) interface
+	    - layer 1 control via network keepalive frames
+	    - direct tunneling of physical interface via IP
+
+	  NOTE: This protocol is called 'Layer 1 over IP' and is not
+	  compatible with ISDNoIP (Agfeo) or TDMoIP. Protocol description is
+	  provided in the source code.
+
+source "drivers/isdn/hardware/mISDN/Kconfig"
+
 endif #MISDN
diff --git a/drivers/isdn/mISDN/Makefile b/drivers/isdn/mISDN/Makefile
index 7f1a2180420..1cb5e633cf7 100644
--- a/drivers/isdn/mISDN/Makefile
+++ b/drivers/isdn/mISDN/Makefile
@@ -4,8 +4,10 @@
 
 obj-$(CONFIG_MISDN) += mISDN_core.o
 obj-$(CONFIG_MISDN_DSP) += mISDN_dsp.o
+obj-$(CONFIG_MISDN_L1OIP) += l1oip.o
 
 # multi objects
 
 mISDN_core-objs := core.o fsm.o socket.o hwchannel.o stack.o layer1.o layer2.o tei.o timerdev.o
 mISDN_dsp-objs := dsp_core.o dsp_cmx.o dsp_tones.o dsp_dtmf.o dsp_audio.o dsp_blowfish.o dsp_pipeline.o dsp_hwec.o
+l1oip-objs := l1oip_core.o l1oip_codec.o
diff --git a/drivers/isdn/mISDN/l1oip.h b/drivers/isdn/mISDN/l1oip.h
new file mode 100644
index 00000000000..a23d575449f
--- /dev/null
+++ b/drivers/isdn/mISDN/l1oip.h
@@ -0,0 +1,91 @@
+/*
+ * see notice in l1oip.c
+ */
+
+/* debugging */
+#define DEBUG_L1OIP_INIT	0x00010000
+#define DEBUG_L1OIP_SOCKET	0x00020000
+#define DEBUG_L1OIP_MGR		0x00040000
+#define DEBUG_L1OIP_MSG		0x00080000
+
+/* enable to disorder received bchannels by sequence 2143658798... */
+/*
+#define REORDER_DEBUG
+*/
+
+/* frames */
+#define L1OIP_MAX_LEN		2048		/* max packet size form l2 */
+#define L1OIP_MAX_PERFRAME	1400		/* max data size in one frame */
+
+
+/* timers */
+#define L1OIP_KEEPALIVE		15
+#define L1OIP_TIMEOUT		65
+
+
+/* socket */
+#define L1OIP_DEFAULTPORT	931
+
+
+/* channel structure */
+struct l1oip_chan {
+	struct dchannel       	*dch;
+	struct bchannel       	*bch;
+	u32			tx_counter;	/* counts xmit bytes/packets */
+	u32			rx_counter;	/* counts recv bytes/packets */
+	u32			codecstate;	/* used by codec to save data */
+#ifdef REORDER_DEBUG
+	int			disorder_flag;
+	struct sk_buff		*disorder_skb;
+	u32			disorder_cnt;
+#endif
+};
+
+
+/* card structure */
+struct l1oip {
+	struct list_head        list;
+
+	/* card */
+	int			registered;	/* if registered with mISDN */
+	char			name[MISDN_MAX_IDLEN];
+	int			idx;		/* card index */
+	int			pri;		/* 1=pri, 0=bri */
+	int			d_idx;		/* current dchannel number */
+	int			b_num;		/* number of bchannels */
+	u32			id;		/* id of connection */
+	int			ondemand;	/* if transmis. is on demand */
+	int			bundle;		/* bundle channels in one frm */
+	int			codec;		/* codec to use for transmis. */
+	int			limit;		/* limit number of bchannels */
+
+	/* timer */
+	struct timer_list 	keep_tl;
+	struct timer_list 	timeout_tl;
+	int			timeout_on;
+	struct work_struct	workq;
+
+	/* socket */
+	struct socket 		*socket;	/* if set, socket is created */
+	struct completion 	socket_complete;/* completion of sock thread */
+	struct task_struct	*socket_thread;
+	spinlock_t 		socket_lock;	/* access sock outside thread */
+	u32			remoteip;	/* if all set, ip is assigned */
+	u16	 		localport;	/* must always be set */
+	u16	 		remoteport;	/* must always be set */
+	struct sockaddr_in	sin_local;	/* local socket name */
+	struct sockaddr_in	sin_remote;	/* remote socket name */
+	struct msghdr		sendmsg;	/* ip message to send */
+	struct iovec		sendiov;	/* iov for message */
+
+	/* frame */
+	struct l1oip_chan	chan[128];	/* channel instances */
+};
+
+extern int l1oip_law_to_4bit(u8 *data, int len, u8 *result, u32 *state);
+extern int l1oip_4bit_to_law(u8 *data, int len, u8 *result);
+extern int l1oip_alaw_to_ulaw(u8 *data, int len, u8 *result);
+extern int l1oip_ulaw_to_alaw(u8 *data, int len, u8 *result);
+extern void l1oip_4bit_free(void);
+extern int l1oip_4bit_alloc(int ulaw);
+
diff --git a/drivers/isdn/mISDN/l1oip_codec.c b/drivers/isdn/mISDN/l1oip_codec.c
new file mode 100644
index 00000000000..a2dc4570ef4
--- /dev/null
+++ b/drivers/isdn/mISDN/l1oip_codec.c
@@ -0,0 +1,374 @@
+/*
+
+ * l1oip_codec.c  generic codec using lookup table
+ *  -> conversion from a-Law to u-Law
+ *  -> conversion from u-Law to a-Law
+ *  -> compression by reducing the number of sample resolution to 4
+ *
+ * NOTE: It is not compatible with any standard codec like ADPCM.
+ *
+ * Author	Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+/*
+
+How the codec works:
+--------------------
+
+The volume is increased to increase the dynamic range of the audio signal.
+Each sample is converted to a-LAW with only 16 steps of level resolution.
+A pair of two samples are stored in one byte.
+
+The first byte is stored in the upper bits, the second byte is stored in the
+lower bits.
+
+To speed up compression and decompression, two lookup tables are formed:
+
+- 16 bits index for two samples (law encoded) with 8 bit compressed result.
+- 8 bits index for one compressed data with 16 bits decompressed result.
+
+NOTE: The bytes are handled as they are law-encoded.
+
+*/
+
+#include <linux/vmalloc.h>
+#include <linux/mISDNif.h>
+#include "core.h"
+
+/* definitions of codec. don't use calculations, code may run slower. */
+
+static u8 *table_com;
+static u16 *table_dec;
+
+
+/* alaw -> ulaw */
+static u8 alaw_to_ulaw[256] =
+{
+	0xab, 0x2b, 0xe3, 0x63, 0x8b, 0x0b, 0xc9, 0x49,
+	0xba, 0x3a, 0xf6, 0x76, 0x9b, 0x1b, 0xd7, 0x57,
+	0xa3, 0x23, 0xdd, 0x5d, 0x83, 0x03, 0xc1, 0x41,
+	0xb2, 0x32, 0xeb, 0x6b, 0x93, 0x13, 0xcf, 0x4f,
+	0xaf, 0x2f, 0xe7, 0x67, 0x8f, 0x0f, 0xcd, 0x4d,
+	0xbe, 0x3e, 0xfe, 0x7e, 0x9f, 0x1f, 0xdb, 0x5b,
+	0xa7, 0x27, 0xdf, 0x5f, 0x87, 0x07, 0xc5, 0x45,
+	0xb6, 0x36, 0xef, 0x6f, 0x97, 0x17, 0xd3, 0x53,
+	0xa9, 0x29, 0xe1, 0x61, 0x89, 0x09, 0xc7, 0x47,
+	0xb8, 0x38, 0xf2, 0x72, 0x99, 0x19, 0xd5, 0x55,
+	0xa1, 0x21, 0xdc, 0x5c, 0x81, 0x01, 0xbf, 0x3f,
+	0xb0, 0x30, 0xe9, 0x69, 0x91, 0x11, 0xce, 0x4e,
+	0xad, 0x2d, 0xe5, 0x65, 0x8d, 0x0d, 0xcb, 0x4b,
+	0xbc, 0x3c, 0xfa, 0x7a, 0x9d, 0x1d, 0xd9, 0x59,
+	0xa5, 0x25, 0xde, 0x5e, 0x85, 0x05, 0xc3, 0x43,
+	0xb4, 0x34, 0xed, 0x6d, 0x95, 0x15, 0xd1, 0x51,
+	0xac, 0x2c, 0xe4, 0x64, 0x8c, 0x0c, 0xca, 0x4a,
+	0xbb, 0x3b, 0xf8, 0x78, 0x9c, 0x1c, 0xd8, 0x58,
+	0xa4, 0x24, 0xde, 0x5e, 0x84, 0x04, 0xc2, 0x42,
+	0xb3, 0x33, 0xec, 0x6c, 0x94, 0x14, 0xd0, 0x50,
+	0xb0, 0x30, 0xe8, 0x68, 0x90, 0x10, 0xce, 0x4e,
+	0xbf, 0x3f, 0xfe, 0x7e, 0xa0, 0x20, 0xdc, 0x5c,
+	0xa8, 0x28, 0xe0, 0x60, 0x88, 0x08, 0xc6, 0x46,
+	0xb7, 0x37, 0xf0, 0x70, 0x98, 0x18, 0xd4, 0x54,
+	0xaa, 0x2a, 0xe2, 0x62, 0x8a, 0x0a, 0xc8, 0x48,
+	0xb9, 0x39, 0xf4, 0x74, 0x9a, 0x1a, 0xd6, 0x56,
+	0xa2, 0x22, 0xdd, 0x5d, 0x82, 0x02, 0xc0, 0x40,
+	0xb1, 0x31, 0xea, 0x6a, 0x92, 0x12, 0xcf, 0x4f,
+	0xae, 0x2e, 0xe6, 0x66, 0x8e, 0x0e, 0xcc, 0x4c,
+	0xbd, 0x3d, 0xfc, 0x7c, 0x9e, 0x1e, 0xda, 0x5a,
+	0xa6, 0x26, 0xdf, 0x5f, 0x86, 0x06, 0xc4, 0x44,
+	0xb5, 0x35, 0xee, 0x6e, 0x96, 0x16, 0xd2, 0x52
+};
+
+/* ulaw -> alaw */
+static u8 ulaw_to_alaw[256] =
+{
+	0xab, 0x55, 0xd5, 0x15, 0x95, 0x75, 0xf5, 0x35,
+	0xb5, 0x45, 0xc5, 0x05, 0x85, 0x65, 0xe5, 0x25,
+	0xa5, 0x5d, 0xdd, 0x1d, 0x9d, 0x7d, 0xfd, 0x3d,
+	0xbd, 0x4d, 0xcd, 0x0d, 0x8d, 0x6d, 0xed, 0x2d,
+	0xad, 0x51, 0xd1, 0x11, 0x91, 0x71, 0xf1, 0x31,
+	0xb1, 0x41, 0xc1, 0x01, 0x81, 0x61, 0xe1, 0x21,
+	0x59, 0xd9, 0x19, 0x99, 0x79, 0xf9, 0x39, 0xb9,
+	0x49, 0xc9, 0x09, 0x89, 0x69, 0xe9, 0x29, 0xa9,
+	0xd7, 0x17, 0x97, 0x77, 0xf7, 0x37, 0xb7, 0x47,
+	0xc7, 0x07, 0x87, 0x67, 0xe7, 0x27, 0xa7, 0xdf,
+	0x9f, 0x7f, 0xff, 0x3f, 0xbf, 0x4f, 0xcf, 0x0f,
+	0x8f, 0x6f, 0xef, 0x2f, 0x53, 0x13, 0x73, 0x33,
+	0xb3, 0x43, 0xc3, 0x03, 0x83, 0x63, 0xe3, 0x23,
+	0xa3, 0x5b, 0xdb, 0x1b, 0x9b, 0x7b, 0xfb, 0x3b,
+	0xbb, 0xbb, 0x4b, 0x4b, 0xcb, 0xcb, 0x0b, 0x0b,
+	0x8b, 0x8b, 0x6b, 0x6b, 0xeb, 0xeb, 0x2b, 0x2b,
+	0xab, 0x54, 0xd4, 0x14, 0x94, 0x74, 0xf4, 0x34,
+	0xb4, 0x44, 0xc4, 0x04, 0x84, 0x64, 0xe4, 0x24,
+	0xa4, 0x5c, 0xdc, 0x1c, 0x9c, 0x7c, 0xfc, 0x3c,
+	0xbc, 0x4c, 0xcc, 0x0c, 0x8c, 0x6c, 0xec, 0x2c,
+	0xac, 0x50, 0xd0, 0x10, 0x90, 0x70, 0xf0, 0x30,
+	0xb0, 0x40, 0xc0, 0x00, 0x80, 0x60, 0xe0, 0x20,
+	0x58, 0xd8, 0x18, 0x98, 0x78, 0xf8, 0x38, 0xb8,
+	0x48, 0xc8, 0x08, 0x88, 0x68, 0xe8, 0x28, 0xa8,
+	0xd6, 0x16, 0x96, 0x76, 0xf6, 0x36, 0xb6, 0x46,
+	0xc6, 0x06, 0x86, 0x66, 0xe6, 0x26, 0xa6, 0xde,
+	0x9e, 0x7e, 0xfe, 0x3e, 0xbe, 0x4e, 0xce, 0x0e,
+	0x8e, 0x6e, 0xee, 0x2e, 0x52, 0x12, 0x72, 0x32,
+	0xb2, 0x42, 0xc2, 0x02, 0x82, 0x62, 0xe2, 0x22,
+	0xa2, 0x5a, 0xda, 0x1a, 0x9a, 0x7a, 0xfa, 0x3a,
+	0xba, 0xba, 0x4a, 0x4a, 0xca, 0xca, 0x0a, 0x0a,
+	0x8a, 0x8a, 0x6a, 0x6a, 0xea, 0xea, 0x2a, 0x2a
+};
+
+/* alaw -> 4bit compression */
+static u8 alaw_to_4bit[256] = {
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0d, 0x02,
+	0x0e, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x01, 0x0a, 0x05,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x08, 0x07, 0x0f, 0x00, 0x0b, 0x04,
+	0x0e, 0x01, 0x0a, 0x05, 0x0f, 0x00, 0x0c, 0x03,
+	0x0d, 0x02, 0x09, 0x06, 0x0f, 0x00, 0x0b, 0x04,
+};
+
+/* 4bit -> alaw decompression */
+static u8 _4bit_to_alaw[16] = {
+	0x5d, 0x51, 0xd9, 0xd7, 0x5f, 0x53, 0xa3, 0x4b,
+	0x2a, 0x3a, 0x22, 0x2e, 0x26, 0x56, 0x20, 0x2c,
+};
+
+/* ulaw -> 4bit compression */
+static u8 ulaw_to_4bit[256] = {
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+	0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+	0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x04, 0x04,
+	0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+	0x04, 0x04, 0x04, 0x04, 0x05, 0x05, 0x05, 0x05,
+	0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
+	0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+	0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x08,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+	0x0f, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+	0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e,
+	0x0e, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d,
+	0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d,
+	0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c,
+	0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0b, 0x0b,
+	0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
+	0x0b, 0x0b, 0x0b, 0x0b, 0x0a, 0x0a, 0x0a, 0x0a,
+	0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+	0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,
+	0x09, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+	0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+};
+
+/* 4bit -> ulaw decompression */
+static u8 _4bit_to_ulaw[16] = {
+	0x11, 0x21, 0x31, 0x40, 0x4e, 0x5c, 0x68, 0x71,
+	0xfe, 0xef, 0xe7, 0xdb, 0xcd, 0xbf, 0xaf, 0x9f,
+};
+
+
+/*
+ * Compresses data to the result buffer
+ * The result size must be at least half of the input buffer.
+ * The number of samples also must be even!
+ */
+int
+l1oip_law_to_4bit(u8 *data, int len, u8 *result, u32 *state)
+{
+	int ii, i = 0, o = 0;
+
+	if (!len)
+		return 0;
+
+	/* send saved byte and first input byte */
+	if (*state) {
+		*result++ = table_com[(((*state)<<8)&0xff00) | (*data++)];
+		len--;
+		o++;
+	}
+
+	ii = len >> 1;
+
+	while (i < ii) {
+		*result++ = table_com[(data[0]<<8) | (data[1])];
+		data += 2;
+		i++;
+		o++;
+	}
+
+	/* if len has an odd number, we save byte for next call */
+	if (len & 1)
+		*state = 0x100 + *data;
+	else
+		*state = 0;
+
+	return o;
+}
+
+/* Decompress data to the result buffer
+ * The result size must be the number of sample in packet. (2 * input data)
+ * The number of samples in the result are even!
+ */
+int
+l1oip_4bit_to_law(u8 *data, int len, u8 *result)
+{
+	int i = 0;
+	u16 r;
+
+	while (i < len) {
+		r = table_dec[*data++];
+		*result++ = r>>8;
+		*result++ = r;
+		i++;
+	}
+
+	return len << 1;
+}
+
+
+/*
+ * law conversion
+ */
+int
+l1oip_alaw_to_ulaw(u8 *data, int len, u8 *result)
+{
+	int i = 0;
+
+	while (i < len) {
+		*result++ = alaw_to_ulaw[*data++];
+		i++;
+	}
+
+	return len;
+}
+
+int
+l1oip_ulaw_to_alaw(u8 *data, int len, u8 *result)
+{
+	int i = 0;
+
+	while (i < len) {
+		*result++ = ulaw_to_alaw[*data++];
+		i++;
+	}
+
+	return len;
+}
+
+
+/*
+ * generate/free compression and decompression table
+ */
+void
+l1oip_4bit_free(void)
+{
+	if (table_dec)
+		vfree(table_dec);
+	if (table_com)
+		vfree(table_com);
+	table_com = NULL;
+	table_dec = NULL;
+}
+
+int
+l1oip_4bit_alloc(int ulaw)
+{
+	int i1, i2, c, sample;
+
+	/* in case, it is called again */
+	if (table_dec)
+		return 0;
+
+	/* alloc conversion tables */
+	table_com = vmalloc(65536);
+	table_dec = vmalloc(512);
+	if (!table_com | !table_dec) {
+		l1oip_4bit_free();
+		return -ENOMEM;
+	}
+	memset(table_com, 0, 65536);
+	memset(table_dec, 0, 512);
+	/* generate compression table */
+	i1 = 0;
+	while (i1 < 256) {
+		if (ulaw)
+			c = ulaw_to_4bit[i1];
+		else
+			c = alaw_to_4bit[i1];
+		i2 = 0;
+		while (i2 < 256) {
+			table_com[(i1<<8) | i2] |= (c<<4);
+			table_com[(i2<<8) | i1] |= c;
+			i2++;
+		}
+		i1++;
+	}
+
+	/* generate decompression table */
+	i1 = 0;
+	while (i1 < 16) {
+		if (ulaw)
+			sample = _4bit_to_ulaw[i1];
+		else
+			sample = _4bit_to_alaw[i1];
+		i2 = 0;
+		while (i2 < 16) {
+			table_dec[(i1<<4) | i2] |= (sample<<8);
+			table_dec[(i2<<4) | i1] |= sample;
+			i2++;
+		}
+		i1++;
+	}
+
+	return 0;
+}
+
+
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
new file mode 100644
index 00000000000..155b99780c4
--- /dev/null
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -0,0 +1,1518 @@
+/*
+
+ * l1oip.c  low level driver for tunneling layer 1 over IP
+ *
+ * NOTE: It is not compatible with TDMoIP nor "ISDN over IP".
+ *
+ * Author	Andreas Eversberg (jolly@eversberg.eu)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* module parameters:
+ * type:
+	Value 1	= BRI
+	Value 2	= PRI
+	Value 3 = BRI (multi channel frame, not supported yet)
+	Value 4 = PRI (multi channel frame, not supported yet)
+	A multi channel frame reduces overhead to a single frame for all
+	b-channels, but increases delay.
+	(NOTE: Multi channel frames are not implemented yet.)
+
+ * codec:
+	Value 0 = transparent (default)
+	Value 1 = transfer ALAW
+	Value 2 = transfer ULAW
+	Value 3 = transfer generic 4 bit compression.
+
+ * ulaw:
+	0 = we use a-Law (default)
+	1 = we use u-Law
+
+ * limit:
+	limitation of B-channels to control bandwidth (1...126)
+	BRI: 1 or 2
+	PRI: 1-30, 31-126 (126, because dchannel ist not counted here)
+	Also limited ressources are used for stack, resulting in less channels.
+	It is possible to have more channels than 30 in PRI mode, this must
+	be supported by the application.
+
+ * ip:
+	byte representation of remote ip address (127.0.0.1 -> 127,0,0,1)
+	If not given or four 0, no remote address is set.
+	For multiple interfaces, concat ip addresses. (127,0,0,1,127,0,0,1)
+
+ * port:
+	port number (local interface)
+	If not given or 0, port 931 is used for fist instance, 932 for next...
+	For multiple interfaces, different ports must be given.
+
+ * remoteport:
+	port number (remote interface)
+	If not given or 0, remote port equals local port
+	For multiple interfaces on equal sites, different ports must be given.
+
+ * ondemand:
+	0 = fixed (always transmit packets, even when remote side timed out)
+	1 = on demand (only transmit packets, when remote side is detected)
+	the default is 0
+	NOTE: ID must also be set for on demand.
+
+ * id:
+	optional value to identify frames. This value must be equal on both
+	peers and should be random. If omitted or 0, no ID is transmitted.
+
+ * debug:
+	NOTE: only one debug value must be given for all cards
+	enable debugging (see l1oip.h for debug options)
+
+
+Special mISDN controls:
+
+ op = MISDN_CTRL_SETPEER*
+ p1 = bytes 0-3 : remote IP address in network order (left element first)
+ p2 = bytes 1-2 : remote port in network order (high byte first)
+ optional:
+ p2 = bytes 3-4 : local port in network order (high byte first)
+
+ op = MISDN_CTRL_UNSETPEER*
+
+ * Use l1oipctrl for comfortable setting or removing ip address.
+   (Layer 1 Over IP CTRL)
+
+
+L1oIP-Protocol
+--------------
+
+Frame Header:
+
+ 7 6 5 4 3 2 1 0
++---------------+
+|Ver|T|I|Coding |
++---------------+
+|  ID byte 3 *  |
++---------------+
+|  ID byte 2 *  |
++---------------+
+|  ID byte 1 *  |
++---------------+
+|  ID byte 0 *  |
++---------------+
+|M|   Channel   |
++---------------+
+|    Length *   |
++---------------+
+| Time Base MSB |
++---------------+
+| Time Base LSB |
++---------------+
+| Data....	|
+
+...
+
+|               |
++---------------+
+|M|   Channel   |
++---------------+
+|    Length *   |
++---------------+
+| Time Base MSB |
++---------------+
+| Time Base LSB |
++---------------+
+| Data....	|
+
+...
+
+
+* Only included in some cases.
+
+- Ver = Version
+If version is missmatch, the frame must be ignored.
+
+- T = Type of interface
+Must be 0 for S0 or 1 for E1.
+
+- I = Id present
+If bit is set, four ID bytes are included in frame.
+
+- ID = Connection ID
+Additional ID to prevent Denial of Service attacs. Also it prevents hijacking
+connections with dynamic IP. The ID should be random and must not be 0.
+
+- Coding = Type of codec
+Must be 0 for no transcoding. Also for D-channel and other HDLC frames.
+ 1 and 2 are reserved for explicitly use of a-LAW or u-LAW codec.
+ 3 is used for generic table compressor.
+
+- M = More channels to come. If this flag is 1, the following byte contains
+the length of the channel data. After the data block, the next channel will
+be defined. The flag for the last channel block (or if only one channel is
+transmitted), must be 0 and no length is given.
+
+- Channel = Channel number
+0 reserved
+1-3 channel data for S0 (3 is D-channel)
+1-31 channel data for E1 (16 is D-channel)
+32-127 channel data for extended E1 (16 is D-channel)
+
+- The length is used if the M-flag is 1. It is used to find the next channel
+inside frame.
+NOTE: A value of 0 equals 256 bytes of data.
+ -> For larger data blocks, a single frame must be used.
+ -> For larger streams, a single frame or multiple blocks with same channel ID
+   must be used.
+
+- Time Base = Timestamp of first sample in frame
+The "Time Base" is used to rearange packets and to detect packet loss.
+The 16 bits are sent in network order (MSB first) and count 1/8000 th of a
+second. This causes a wrap arround each 8,192 seconds. There is no requirement
+for the initial "Time Base", but 0 should be used for the first packet.
+In case of HDLC data, this timestamp counts the packet or byte number.
+
+
+Two Timers:
+
+After initialisation, a timer of 15 seconds is started. Whenever a packet is
+transmitted, the timer is reset to 15 seconds again. If the timer expires, an
+empty packet is transmitted. This keep the connection alive.
+
+When a valid packet is received, a timer 65 seconds is started. The interface
+become ACTIVE. If the timer expires, the interface becomes INACTIVE.
+
+
+Dynamic IP handling:
+
+To allow dynamic IP, the ID must be non 0. In this case, any packet with the
+correct port number and ID will be accepted. If the remote side changes its IP
+the new IP is used for all transmitted packets until it changes again.
+
+
+On Demand:
+
+If the ondemand parameter is given, the remote IP is set to 0 on timeout.
+This will stop keepalive traffic to remote. If the remote is online again,
+traffic will continue to the remote address. This is usefull for road warriors.
+This feature only works with ID set, otherwhise it is highly unsecure.
+
+
+Socket and Thread
+-----------------
+
+The complete socket opening and closing is done by a thread.
+When the thread opened a socket, the hc->socket descriptor is set. Whenever a
+packet shall be sent to the socket, the hc->socket must be checked wheter not
+NULL. To prevent change in socket descriptor, the hc->socket_lock must be used.
+To change the socket, a recall of l1oip_socket_open() will safely kill the
+socket process and create a new one.
+
+*/
+
+#define L1OIP_VERSION	0	/* 0...3 */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mISDNif.h>
+#include <linux/mISDNhw.h>
+#include <linux/mISDNdsp.h>
+#include <linux/init.h>
+#include <linux/in.h>
+#include <linux/inet.h>
+#include <linux/workqueue.h>
+#include <linux/kthread.h>
+#include <net/sock.h>
+#include "core.h"
+#include "l1oip.h"
+
+static const char *l1oip_revision = "2.00";
+
+static int l1oip_cnt;
+static spinlock_t l1oip_lock;
+static struct list_head l1oip_ilist;
+
+#define MAX_CARDS	16
+static u_int type[MAX_CARDS];
+static u_int codec[MAX_CARDS];
+static u_int ip[MAX_CARDS*4];
+static u_int port[MAX_CARDS];
+static u_int remoteport[MAX_CARDS];
+static u_int ondemand[MAX_CARDS];
+static u_int limit[MAX_CARDS];
+static u_int id[MAX_CARDS];
+static int debug;
+static int ulaw;
+
+MODULE_AUTHOR("Andreas Eversberg");
+MODULE_LICENSE("GPL");
+module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(codec, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(ip, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(remoteport, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(ondemand, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(limit, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(id, uint, NULL, S_IRUGO | S_IWUSR);
+module_param(ulaw, uint, S_IRUGO | S_IWUSR);
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+
+/*
+ * send a frame via socket, if open and restart timer
+ */
+static int
+l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
+	u16 timebase, u8 *buf, int len)
+{
+	u8 *p;
+	int multi = 0;
+	u8 frame[len+32];
+	struct socket *socket = NULL;
+	mm_segment_t oldfs;
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: sending data to socket (len = %d)\n",
+			__func__, len);
+
+	p = frame;
+
+	/* restart timer */
+	if ((int)(hc->keep_tl.expires-jiffies) < 5*HZ) {
+		del_timer(&hc->keep_tl);
+		hc->keep_tl.expires = jiffies + L1OIP_KEEPALIVE*HZ;
+		add_timer(&hc->keep_tl);
+	} else
+		hc->keep_tl.expires = jiffies + L1OIP_KEEPALIVE*HZ;
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: resetting timer\n", __func__);
+
+	/* drop if we have no remote ip or port */
+	if (!hc->sin_remote.sin_addr.s_addr || !hc->sin_remote.sin_port) {
+		if (debug & DEBUG_L1OIP_MSG)
+			printk(KERN_DEBUG "%s: dropping frame, because remote "
+				"IP is not set.\n", __func__);
+		return len;
+	}
+
+	/* assemble frame */
+	*p++ = (L1OIP_VERSION<<6) /* version and coding */
+	     | (hc->pri?0x20:0x00) /* type */
+	     | (hc->id?0x10:0x00) /* id */
+	     | localcodec;
+	if (hc->id) {
+		*p++ = hc->id>>24; /* id */
+		*p++ = hc->id>>16;
+		*p++ = hc->id>>8;
+		*p++ = hc->id;
+	}
+	*p++ = (multi == 1)?0x80:0x00 + channel; /* m-flag, channel */
+	if (multi == 1)
+		*p++ = len; /* length */
+	*p++ = timebase>>8; /* time base */
+	*p++ = timebase;
+
+	if (buf && len) { /* add data to frame */
+		if (localcodec == 1 && ulaw)
+			l1oip_ulaw_to_alaw(buf, len, p);
+		else if (localcodec == 2 && !ulaw)
+			l1oip_alaw_to_ulaw(buf, len, p);
+		else if (localcodec == 3)
+			len = l1oip_law_to_4bit(buf, len, p,
+				&hc->chan[channel].codecstate);
+		else
+			memcpy(p, buf, len);
+	}
+	len += p - frame;
+
+	/* check for socket in safe condition */
+	spin_lock(&hc->socket_lock);
+	if (!hc->socket) {
+		spin_unlock(&hc->socket_lock);
+		return 0;
+	}
+	/* seize socket */
+	socket = hc->socket;
+	hc->socket = NULL;
+	spin_unlock(&hc->socket_lock);
+	/* send packet */
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: sending packet to socket (len "
+			"= %d)\n", __func__, len);
+	hc->sendiov.iov_base = frame;
+	hc->sendiov.iov_len  = len;
+	oldfs = get_fs();
+	set_fs(KERNEL_DS);
+	len = sock_sendmsg(socket, &hc->sendmsg, len);
+	set_fs(oldfs);
+	/* give socket back */
+	hc->socket = socket; /* no locking required */
+
+	return len;
+}
+
+
+/*
+ * receive channel data from socket
+ */
+static void
+l1oip_socket_recv(struct l1oip *hc, u8 remotecodec, u8 channel, u16 timebase,
+	u8 *buf, int len)
+{
+	struct sk_buff *nskb;
+	struct bchannel *bch;
+	struct dchannel *dch;
+	u8 *p;
+	u32 rx_counter;
+
+	if (len == 0) {
+		if (debug & DEBUG_L1OIP_MSG)
+			printk(KERN_DEBUG "%s: received empty keepalive data, "
+				"ignoring\n", __func__);
+		return;
+	}
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: received data, sending to mISDN (%d)\n",
+			__func__, len);
+
+	if (channel < 1 || channel > 127) {
+		printk(KERN_WARNING "%s: packet error - channel %d out of "
+			"range\n", __func__, channel);
+		return;
+	}
+	dch = hc->chan[channel].dch;
+	bch = hc->chan[channel].bch;
+	if (!dch && !bch) {
+		printk(KERN_WARNING "%s: packet error - channel %d not in "
+			"stack\n", __func__, channel);
+		return;
+	}
+
+	/* prepare message */
+	nskb = mI_alloc_skb((remotecodec == 3)?(len<<1):len, GFP_ATOMIC);
+	if (!nskb) {
+		printk(KERN_ERR "%s: No mem for skb.\n", __func__);
+		return;
+	}
+	p = skb_put(nskb, (remotecodec == 3)?(len<<1):len);
+
+	if (remotecodec == 1 && ulaw)
+		l1oip_alaw_to_ulaw(buf, len, p);
+	else if (remotecodec == 2 && !ulaw)
+		l1oip_ulaw_to_alaw(buf, len, p);
+	else if (remotecodec == 3)
+		len = l1oip_4bit_to_law(buf, len, p);
+	else
+		memcpy(p, buf, len);
+
+	/* send message up */
+	if (dch && len >= 2) {
+		dch->rx_skb = nskb;
+		recv_Dchannel(dch);
+	}
+	if (bch) {
+		/* expand 16 bit sequence number to 32 bit sequence number */
+		rx_counter = hc->chan[channel].rx_counter;
+		if (((s16)(timebase - rx_counter)) >= 0) {
+			/* time has changed forward */
+			if (timebase >= (rx_counter & 0xffff))
+				rx_counter =
+					(rx_counter & 0xffff0000) | timebase;
+			else
+				rx_counter = ((rx_counter & 0xffff0000)+0x10000)
+					| timebase;
+		} else {
+			/* time has changed backwards */
+			if (timebase < (rx_counter & 0xffff))
+				rx_counter =
+					(rx_counter & 0xffff0000) | timebase;
+			else
+				rx_counter = ((rx_counter & 0xffff0000)-0x10000)
+					| timebase;
+		}
+		hc->chan[channel].rx_counter = rx_counter;
+
+#ifdef REORDER_DEBUG
+		if (hc->chan[channel].disorder_flag) {
+			struct sk_buff *skb;
+			int cnt;
+			skb = hc->chan[channel].disorder_skb;
+			hc->chan[channel].disorder_skb = nskb;
+			nskb = skb;
+			cnt = hc->chan[channel].disorder_cnt;
+			hc->chan[channel].disorder_cnt = rx_counter;
+			rx_counter = cnt;
+		}
+		hc->chan[channel].disorder_flag ^= 1;
+		if (nskb)
+#endif
+		queue_ch_frame(&bch->ch, PH_DATA_IND, rx_counter, nskb);
+	}
+}
+
+
+/*
+ * parse frame and extract channel data
+ */
+static void
+l1oip_socket_parse(struct l1oip *hc, struct sockaddr_in *sin, u8 *buf, int len)
+{
+	u32			id;
+	u8			channel;
+	u8			remotecodec;
+	u16			timebase;
+	int			m, mlen;
+	int			len_start = len; /* initial frame length */
+	struct dchannel		*dch = hc->chan[hc->d_idx].dch;
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: received frame, parsing... (%d)\n",
+			__func__, len);
+
+	/* check lenght */
+	if (len < 1+1+2) {
+		printk(KERN_WARNING "%s: packet error - length %d below "
+			"4 bytes\n", __func__, len);
+		return;
+	}
+
+	/* check version */
+	if (((*buf)>>6) != L1OIP_VERSION) {
+		printk(KERN_WARNING "%s: packet error - unknown version %d\n",
+			__func__, buf[0]>>6);
+		return;
+	}
+
+	/* check type */
+	if (((*buf)&0x20) && !hc->pri) {
+		printk(KERN_WARNING "%s: packet error - received E1 packet "
+			"on S0 interface\n", __func__);
+		return;
+	}
+	if (!((*buf)&0x20) && hc->pri) {
+		printk(KERN_WARNING "%s: packet error - received S0 packet "
+			"on E1 interface\n", __func__);
+		return;
+	}
+
+	/* get id flag */
+	id = (*buf>>4)&1;
+
+	/* check coding */
+	remotecodec = (*buf) & 0x0f;
+	if (remotecodec > 3) {
+		printk(KERN_WARNING "%s: packet error - remotecodec %d "
+			"unsupported\n", __func__, remotecodec);
+		return;
+	}
+	buf++;
+	len--;
+
+	/* check id */
+	if (id) {
+		if (!hc->id) {
+			printk(KERN_WARNING "%s: packet error - packet has id "
+				"0x%x, but we have not\n", __func__, id);
+			return;
+		}
+		if (len < 4) {
+			printk(KERN_WARNING "%s: packet error - packet too "
+				"short for ID value\n", __func__);
+			return;
+		}
+		id = (*buf++) << 24;
+		id += (*buf++) << 16;
+		id += (*buf++) << 8;
+		id += (*buf++);
+		len -= 4;
+
+		if (id != hc->id) {
+			printk(KERN_WARNING "%s: packet error - ID mismatch, "
+				"got 0x%x, we 0x%x\n",
+				__func__, id, hc->id);
+			return;
+		}
+	} else {
+		if (hc->id) {
+			printk(KERN_WARNING "%s: packet error - packet has no "
+				"ID, but we have\n", __func__);
+			return;
+		}
+	}
+
+multiframe:
+	if (len < 1) {
+		printk(KERN_WARNING "%s: packet error - packet too short, "
+			"channel expected at position %d.\n",
+			__func__, len-len_start+1);
+		return;
+	}
+
+	/* get channel and multiframe flag */
+	channel = *buf&0x7f;
+	m = *buf >> 7;
+	buf++;
+	len--;
+
+	/* check length on multiframe */
+	if (m) {
+		if (len < 1) {
+			printk(KERN_WARNING "%s: packet error - packet too "
+				"short, length expected at position %d.\n",
+				__func__, len_start-len-1);
+			return;
+		}
+
+		mlen = *buf++;
+		len--;
+		if (mlen == 0)
+			mlen = 256;
+		if (len < mlen+3) {
+			printk(KERN_WARNING "%s: packet error - length %d at "
+				"position %d exceeds total length %d.\n",
+				__func__, mlen, len_start-len-1, len_start);
+			return;
+		}
+		if (len == mlen+3) {
+			printk(KERN_WARNING "%s: packet error - length %d at "
+				"position %d will not allow additional "
+				"packet.\n",
+				__func__, mlen, len_start-len+1);
+			return;
+		}
+	} else
+		mlen = len-2; /* single frame, substract timebase */
+
+	if (len < 2) {
+		printk(KERN_WARNING "%s: packet error - packet too short, time "
+			"base expected at position %d.\n",
+			__func__, len-len_start+1);
+		return;
+	}
+
+	/* get time base */
+	timebase = (*buf++) << 8;
+	timebase |= (*buf++);
+	len -= 2;
+
+	/* if inactive, we send up a PH_ACTIVATE and activate */
+	if (!test_bit(FLG_ACTIVE, &dch->Flags)) {
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: interface become active due to "
+				"received packet\n", __func__);
+		test_and_set_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY, 0,
+			NULL, GFP_ATOMIC);
+	}
+
+	/* distribute packet */
+	l1oip_socket_recv(hc, remotecodec, channel, timebase, buf, mlen);
+	buf += mlen;
+	len -= mlen;
+
+	/* multiframe */
+	if (m)
+		goto multiframe;
+
+	/* restart timer */
+	if ((int)(hc->timeout_tl.expires-jiffies) < 5*HZ || !hc->timeout_on) {
+		hc->timeout_on = 1;
+		del_timer(&hc->timeout_tl);
+		hc->timeout_tl.expires = jiffies + L1OIP_TIMEOUT*HZ;
+		add_timer(&hc->timeout_tl);
+	} else /* only adjust timer */
+		hc->timeout_tl.expires = jiffies + L1OIP_TIMEOUT*HZ;
+
+	/* if ip or source port changes */
+	if ((hc->sin_remote.sin_addr.s_addr != sin->sin_addr.s_addr)
+	 || (hc->sin_remote.sin_port != sin->sin_port)) {
+		if (debug & DEBUG_L1OIP_SOCKET)
+			printk(KERN_DEBUG "%s: remote address changes from "
+				"0x%08x to 0x%08x (port %d to %d)\n", __func__,
+				ntohl(hc->sin_remote.sin_addr.s_addr),
+				ntohl(sin->sin_addr.s_addr),
+				ntohs(hc->sin_remote.sin_port),
+				ntohs(sin->sin_port));
+		hc->sin_remote.sin_addr.s_addr = sin->sin_addr.s_addr;
+		hc->sin_remote.sin_port = sin->sin_port;
+	}
+}
+
+
+/*
+ * socket stuff
+ */
+static int
+l1oip_socket_thread(void *data)
+{
+	struct l1oip *hc = (struct l1oip *)data;
+	int ret = 0;
+	struct msghdr msg;
+	struct iovec iov;
+	mm_segment_t oldfs;
+	struct sockaddr_in sin_rx;
+	unsigned char recvbuf[1500];
+	int recvlen;
+	struct socket *socket = NULL;
+	DECLARE_COMPLETION(wait);
+
+	/* make daemon */
+	allow_signal(SIGTERM);
+
+	/* create socket */
+	if (sock_create(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &socket)) {
+		printk(KERN_ERR "%s: Failed to create socket.\n", __func__);
+		return -EIO;
+	}
+
+	/* set incoming address */
+	hc->sin_local.sin_family = AF_INET;
+	hc->sin_local.sin_addr.s_addr = INADDR_ANY;
+	hc->sin_local.sin_port = htons((unsigned short)hc->localport);
+
+	/* set outgoing address */
+	hc->sin_remote.sin_family = AF_INET;
+	hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip);
+	hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport);
+
+	/* bind to incomming port */
+	if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local,
+	    sizeof(hc->sin_local))) {
+		printk(KERN_ERR "%s: Failed to bind socket to port %d.\n",
+			__func__, hc->localport);
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	/* check sk */
+	if (socket->sk == NULL) {
+		printk(KERN_ERR "%s: socket->sk == NULL\n", __func__);
+		ret = -EIO;
+		goto fail;
+	}
+
+	/* build receive message */
+	msg.msg_name = &sin_rx;
+	msg.msg_namelen = sizeof(sin_rx);
+	msg.msg_control = NULL;
+	msg.msg_controllen = 0;
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	/* build send message */
+	hc->sendmsg.msg_name = &hc->sin_remote;
+	hc->sendmsg.msg_namelen = sizeof(hc->sin_remote);
+	hc->sendmsg.msg_control = NULL;
+	hc->sendmsg.msg_controllen = 0;
+	hc->sendmsg.msg_iov    = &hc->sendiov;
+	hc->sendmsg.msg_iovlen = 1;
+
+	/* give away socket */
+	spin_lock(&hc->socket_lock);
+	hc->socket = socket;
+	spin_unlock(&hc->socket_lock);
+
+	/* read loop */
+	if (debug & DEBUG_L1OIP_SOCKET)
+		printk(KERN_DEBUG "%s: socket created and open\n",
+			__func__);
+	while (!signal_pending(current)) {
+		iov.iov_base = recvbuf;
+		iov.iov_len = sizeof(recvbuf);
+		oldfs = get_fs();
+		set_fs(KERNEL_DS);
+		recvlen = sock_recvmsg(socket, &msg, sizeof(recvbuf), 0);
+		set_fs(oldfs);
+		if (recvlen > 0) {
+			l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen);
+		} else {
+			if (debug & DEBUG_L1OIP_SOCKET)
+			    printk(KERN_WARNING "%s: broken pipe on socket\n",
+				__func__);
+		}
+	}
+
+	/* get socket back, check first if in use, maybe by send function */
+	spin_lock(&hc->socket_lock);
+	/* if hc->socket is NULL, it is in use until it is given back */
+	while (!hc->socket) {
+		spin_unlock(&hc->socket_lock);
+		schedule_timeout(HZ/10);
+		spin_lock(&hc->socket_lock);
+	}
+	hc->socket = NULL;
+	spin_unlock(&hc->socket_lock);
+
+	if (debug & DEBUG_L1OIP_SOCKET)
+		printk(KERN_DEBUG "%s: socket thread terminating\n",
+			__func__);
+
+fail:
+	/* close socket */
+	if (socket)
+		sock_release(socket);
+
+	/* if we got killed, signal completion */
+	complete(&hc->socket_complete);
+	hc->socket_thread = NULL; /* show termination of thread */
+
+	if (debug & DEBUG_L1OIP_SOCKET)
+		printk(KERN_DEBUG "%s: socket thread terminated\n",
+			__func__);
+	return ret;
+}
+
+static void
+l1oip_socket_close(struct l1oip *hc)
+{
+	/* kill thread */
+	if (hc->socket_thread) {
+		if (debug & DEBUG_L1OIP_SOCKET)
+			printk(KERN_DEBUG "%s: socket thread exists, "
+				"killing...\n", __func__);
+		send_sig(SIGTERM, hc->socket_thread, 0);
+		wait_for_completion(&hc->socket_complete);
+	}
+}
+
+static int
+l1oip_socket_open(struct l1oip *hc)
+{
+	/* in case of reopen, we need to close first */
+	l1oip_socket_close(hc);
+
+	init_completion(&hc->socket_complete);
+
+	/* create receive process */
+	hc->socket_thread = kthread_run(l1oip_socket_thread, hc, "l1oip_%s",
+		hc->name);
+	if (IS_ERR(hc->socket_thread)) {
+		int err = PTR_ERR(hc->socket_thread);
+		printk(KERN_ERR "%s: Failed (%d) to create socket process.\n",
+			__func__, err);
+		hc->socket_thread = NULL;
+		sock_release(hc->socket);
+		return err;
+	}
+	if (debug & DEBUG_L1OIP_SOCKET)
+		printk(KERN_DEBUG "%s: socket thread created\n", __func__);
+
+	return 0;
+}
+
+
+static void
+l1oip_send_bh(struct work_struct *work)
+{
+	struct l1oip *hc = container_of(work, struct l1oip, workq);
+
+	if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+		printk(KERN_DEBUG "%s: keepalive timer expired, sending empty "
+			"frame on dchannel\n", __func__);
+
+	/* send an empty l1oip frame at D-channel */
+	l1oip_socket_send(hc, 0, hc->d_idx, 0, 0, NULL, 0);
+}
+
+
+/*
+ * timer stuff
+ */
+static void
+l1oip_keepalive(void *data)
+{
+	struct l1oip *hc = (struct l1oip *)data;
+
+	schedule_work(&hc->workq);
+}
+
+static void
+l1oip_timeout(void *data)
+{
+	struct l1oip			*hc = (struct l1oip *)data;
+	struct dchannel		*dch = hc->chan[hc->d_idx].dch;
+
+	if (debug & DEBUG_L1OIP_MSG)
+		printk(KERN_DEBUG "%s: timeout timer expired, turn layer one "
+			"down.\n", __func__);
+
+	hc->timeout_on = 0; /* state that timer must be initialized next time */
+
+	/* if timeout, we send up a PH_DEACTIVATE and deactivate */
+	if (test_bit(FLG_ACTIVE, &dch->Flags)) {
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: interface become deactivated "
+				"due to timeout\n", __func__);
+		test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
+		_queue_data(&dch->dev.D, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0,
+			NULL, GFP_ATOMIC);
+	}
+
+	/* if we have ondemand set, we remove ip address */
+	if (hc->ondemand) {
+		if (debug & DEBUG_L1OIP_MSG)
+			printk(KERN_DEBUG "%s: on demand causes ip address to "
+				"be removed\n", __func__);
+		hc->sin_remote.sin_addr.s_addr = 0;
+	}
+}
+
+
+/*
+ * message handling
+ */
+static int
+handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct l1oip			*hc = dch->hw;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	int			ret = -EINVAL;
+	int			l, ll;
+	unsigned char		*p;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (skb->len < 1) {
+			printk(KERN_WARNING "%s: skb too small\n",
+				__func__);
+			break;
+		}
+		if (skb->len > MAX_DFRAME_LEN_L1 || skb->len > L1OIP_MAX_LEN) {
+			printk(KERN_WARNING "%s: skb too large\n",
+				__func__);
+			break;
+		}
+		/* send frame */
+		p = skb->data;
+		l = skb->len;
+		while (l) {
+			ll = (l < L1OIP_MAX_PERFRAME)?l:L1OIP_MAX_PERFRAME;
+			l1oip_socket_send(hc, 0, dch->slot, 0,
+				hc->chan[dch->slot].tx_counter++, p, ll);
+			p += ll;
+			l -= ll;
+		}
+		skb_trim(skb, 0);
+		queue_ch_frame(ch, PH_DATA_CNF, hh->id, skb);
+		return 0;
+	case PH_ACTIVATE_REQ:
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: PH_ACTIVATE channel %d (1..%d)\n"
+				, __func__, dch->slot, hc->b_num+1);
+		skb_trim(skb, 0);
+		if (test_bit(FLG_ACTIVE, &dch->Flags))
+			queue_ch_frame(ch, PH_ACTIVATE_IND, hh->id, skb);
+		else
+			queue_ch_frame(ch, PH_DEACTIVATE_IND, hh->id, skb);
+		return 0;
+	case PH_DEACTIVATE_REQ:
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: PH_DEACTIVATE channel %d "
+				"(1..%d)\n", __func__, dch->slot,
+				hc->b_num+1);
+		skb_trim(skb, 0);
+		if (test_bit(FLG_ACTIVE, &dch->Flags))
+			queue_ch_frame(ch, PH_ACTIVATE_IND, hh->id, skb);
+		else
+			queue_ch_frame(ch, PH_DEACTIVATE_IND, hh->id, skb);
+		return 0;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static int
+channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
+{
+	int	ret = 0;
+	struct l1oip	*hc = dch->hw;
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_SETPEER | MISDN_CTRL_UNSETPEER;
+		break;
+	case MISDN_CTRL_SETPEER:
+		hc->remoteip = (u32)cq->p1;
+		hc->remoteport = cq->p2 & 0xffff;
+		hc->localport = cq->p2 >> 16;
+		if (!hc->remoteport)
+			hc->remoteport = hc->localport;
+		if (debug & DEBUG_L1OIP_SOCKET)
+			printk(KERN_DEBUG "%s: got new ip address from user "
+				"space.\n", __func__);
+			l1oip_socket_open(hc);
+		break;
+	case MISDN_CTRL_UNSETPEER:
+		if (debug & DEBUG_L1OIP_SOCKET)
+			printk(KERN_DEBUG "%s: removing ip address.\n",
+				__func__);
+		hc->remoteip = 0;
+		l1oip_socket_open(hc);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+open_dchannel(struct l1oip *hc, struct dchannel *dch, struct channel_req *rq)
+{
+	if (debug & DEBUG_HW_OPEN)
+		printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
+		    dch->dev.id, __builtin_return_address(0));
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	if ((dch->dev.D.protocol != ISDN_P_NONE) &&
+	    (dch->dev.D.protocol != rq->protocol)) {
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_WARNING "%s: change protocol %x to %x\n",
+			__func__, dch->dev.D.protocol, rq->protocol);
+	}
+	if (dch->dev.D.protocol != rq->protocol)
+		dch->dev.D.protocol = rq->protocol;
+
+	if (test_bit(FLG_ACTIVE, &dch->Flags)) {
+		_queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
+		    0, NULL, GFP_KERNEL);
+	}
+	rq->ch = &dch->dev.D;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+static int
+open_bchannel(struct l1oip *hc, struct dchannel *dch, struct channel_req *rq)
+{
+	struct bchannel	*bch;
+	int		ch;
+
+	if (!test_bit(rq->adr.channel & 0x1f,
+		&dch->dev.channelmap[rq->adr.channel >> 5]))
+		return -EINVAL;
+	if (rq->protocol == ISDN_P_NONE)
+		return -EINVAL;
+	ch = rq->adr.channel; /* BRI: 1=B1 2=B2  PRI: 1..15,17.. */
+	bch = hc->chan[ch].bch;
+	if (!bch) {
+		printk(KERN_ERR "%s:internal error ch %d has no bch\n",
+		    __func__, ch);
+		return -EINVAL;
+	}
+	if (test_and_set_bit(FLG_OPEN, &bch->Flags))
+		return -EBUSY; /* b-channel can be only open once */
+	bch->ch.protocol = rq->protocol;
+	rq->ch = &bch->ch;
+	if (!try_module_get(THIS_MODULE))
+		printk(KERN_WARNING "%s:cannot get module\n", __func__);
+	return 0;
+}
+
+static int
+l1oip_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct mISDNdevice	*dev = container_of(ch, struct mISDNdevice, D);
+	struct dchannel		*dch = container_of(dev, struct dchannel, dev);
+	struct l1oip			*hc = dch->hw;
+	struct channel_req	*rq;
+	int			err = 0;
+
+	if (dch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case OPEN_CHANNEL:
+		rq = arg;
+		switch (rq->protocol) {
+		case ISDN_P_TE_S0:
+		case ISDN_P_NT_S0:
+			if (hc->pri) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq);
+			break;
+		case ISDN_P_TE_E1:
+		case ISDN_P_NT_E1:
+			if (!hc->pri) {
+				err = -EINVAL;
+				break;
+			}
+			err = open_dchannel(hc, dch, rq);
+			break;
+		default:
+			err = open_bchannel(hc, dch, rq);
+		}
+		break;
+	case CLOSE_CHANNEL:
+		if (debug & DEBUG_HW_OPEN)
+			printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
+			    __func__, dch->dev.id,
+			    __builtin_return_address(0));
+		module_put(THIS_MODULE);
+		break;
+	case CONTROL_CHANNEL:
+		err = channel_dctrl(dch, arg);
+		break;
+	default:
+		if (dch->debug & DEBUG_HW)
+			printk(KERN_DEBUG "%s: unknown command %x\n",
+			    __func__, cmd);
+		err = -EINVAL;
+	}
+	return err;
+}
+
+static int
+handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
+{
+	struct bchannel		*bch = container_of(ch, struct bchannel, ch);
+	struct l1oip			*hc = bch->hw;
+	int			ret = -EINVAL;
+	struct mISDNhead	*hh = mISDN_HEAD_P(skb);
+	int			l, ll, i;
+	unsigned char		*p;
+
+	switch (hh->prim) {
+	case PH_DATA_REQ:
+		if (skb->len <= 0) {
+			printk(KERN_WARNING "%s: skb too small\n",
+				__func__);
+			break;
+		}
+		if (skb->len > MAX_DFRAME_LEN_L1 || skb->len > L1OIP_MAX_LEN) {
+			printk(KERN_WARNING "%s: skb too large\n",
+				__func__);
+			break;
+		}
+		/* check for AIS / ulaw-silence */
+		p = skb->data;
+		l = skb->len;
+		for (i = 0; i < l; i++) {
+			if (*p++ != 0xff)
+				break;
+		}
+		if (i == l) {
+			if (debug & DEBUG_L1OIP_MSG)
+				printk(KERN_DEBUG "%s: got AIS, not sending, "
+					"but counting\n", __func__);
+			hc->chan[bch->slot].tx_counter += l;
+			skb_trim(skb, 0);
+			queue_ch_frame(ch, PH_DATA_CNF, hh->id, skb);
+			return 0;
+		}
+		/* check for silence */
+		p = skb->data;
+		l = skb->len;
+		for (i = 0; i < l; i++) {
+			if (*p++ != 0x2a)
+				break;
+		}
+		if (i == l) {
+			if (debug & DEBUG_L1OIP_MSG)
+				printk(KERN_DEBUG "%s: got silence, not sending"
+					", but counting\n", __func__);
+			hc->chan[bch->slot].tx_counter += l;
+			skb_trim(skb, 0);
+			queue_ch_frame(ch, PH_DATA_CNF, hh->id, skb);
+			return 0;
+		}
+
+		/* send frame */
+		p = skb->data;
+		l = skb->len;
+		while (l) {
+			ll = (l < L1OIP_MAX_PERFRAME)?l:L1OIP_MAX_PERFRAME;
+			l1oip_socket_send(hc, hc->codec, bch->slot, 0,
+				hc->chan[bch->slot].tx_counter, p, ll);
+			hc->chan[bch->slot].tx_counter += ll;
+			p += ll;
+			l -= ll;
+		}
+		skb_trim(skb, 0);
+		queue_ch_frame(ch, PH_DATA_CNF, hh->id, skb);
+		return 0;
+	case PH_ACTIVATE_REQ:
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: PH_ACTIVATE channel %d (1..%d)\n"
+				, __func__, bch->slot, hc->b_num+1);
+		hc->chan[bch->slot].codecstate = 0;
+		test_and_set_bit(FLG_ACTIVE, &bch->Flags);
+		skb_trim(skb, 0);
+		queue_ch_frame(ch, PH_ACTIVATE_IND, hh->id, skb);
+		return 0;
+	case PH_DEACTIVATE_REQ:
+		if (debug & (DEBUG_L1OIP_MSG|DEBUG_L1OIP_SOCKET))
+			printk(KERN_DEBUG "%s: PH_DEACTIVATE channel %d "
+				"(1..%d)\n", __func__, bch->slot,
+				hc->b_num+1);
+		test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+		skb_trim(skb, 0);
+		queue_ch_frame(ch, PH_DEACTIVATE_IND, hh->id, skb);
+		return 0;
+	}
+	if (!ret)
+		dev_kfree_skb(skb);
+	return ret;
+}
+
+static int
+channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
+{
+	int			ret = 0;
+	struct dsp_features	*features =
+		(struct dsp_features *)(*((u_long *)&cq->p1));
+
+	switch (cq->op) {
+	case MISDN_CTRL_GETOP:
+		cq->op = MISDN_CTRL_HW_FEATURES_OP;
+		break;
+	case MISDN_CTRL_HW_FEATURES: /* fill features structure */
+		if (debug & DEBUG_L1OIP_MSG)
+			printk(KERN_DEBUG "%s: HW_FEATURE request\n",
+			    __func__);
+		/* create confirm */
+		features->unclocked = 1;
+		features->unordered = 1;
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown Op %x\n",
+		    __func__, cq->op);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int
+l1oip_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
+{
+	struct bchannel	*bch = container_of(ch, struct bchannel, ch);
+	int		err = -EINVAL;
+
+	if (bch->debug & DEBUG_HW)
+		printk(KERN_DEBUG "%s: cmd:%x %p\n",
+		    __func__, cmd, arg);
+	switch (cmd) {
+	case CLOSE_CHANNEL:
+		test_and_clear_bit(FLG_OPEN, &bch->Flags);
+		test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
+		ch->protocol = ISDN_P_NONE;
+		ch->peer = NULL;
+		module_put(THIS_MODULE);
+		err = 0;
+		break;
+	case CONTROL_CHANNEL:
+		err = channel_bctrl(bch, arg);
+		break;
+	default:
+		printk(KERN_WARNING "%s: unknown prim(%x)\n",
+			__func__, cmd);
+	}
+	return err;
+}
+
+
+/*
+ * cleanup module and stack
+ */
+static void
+release_card(struct l1oip *hc)
+{
+	int	ch;
+
+	if (timer_pending(&hc->keep_tl))
+		del_timer(&hc->keep_tl);
+
+	if (timer_pending(&hc->timeout_tl))
+		del_timer(&hc->timeout_tl);
+
+	if (hc->socket_thread)
+		l1oip_socket_close(hc);
+
+	if (hc->registered && hc->chan[hc->d_idx].dch)
+		mISDN_unregister_device(&hc->chan[hc->d_idx].dch->dev);
+	for (ch = 0; ch < 128; ch++) {
+		if (hc->chan[ch].dch) {
+			mISDN_freedchannel(hc->chan[ch].dch);
+			kfree(hc->chan[ch].dch);
+		}
+		if (hc->chan[ch].bch) {
+			mISDN_freebchannel(hc->chan[ch].bch);
+			kfree(hc->chan[ch].bch);
+#ifdef REORDER_DEBUG
+			if (hc->chan[ch].disorder_skb)
+				dev_kfree_skb(hc->chan[ch].disorder_skb);
+#endif
+		}
+	}
+
+	spin_lock(&l1oip_lock);
+	list_del(&hc->list);
+	spin_unlock(&l1oip_lock);
+
+	kfree(hc);
+}
+
+static void
+l1oip_cleanup(void)
+{
+	struct l1oip *hc, *next;
+
+	list_for_each_entry_safe(hc, next, &l1oip_ilist, list)
+		release_card(hc);
+
+	l1oip_4bit_free();
+}
+
+
+/*
+ * module and stack init
+ */
+static int
+init_card(struct l1oip *hc, int pri, int bundle)
+{
+	struct dchannel	*dch;
+	struct bchannel	*bch;
+	int		ret;
+	int		i, ch;
+
+	spin_lock_init(&hc->socket_lock);
+	hc->idx = l1oip_cnt;
+	hc->pri = pri;
+	hc->d_idx = pri?16:3;
+	hc->b_num = pri?30:2;
+	hc->bundle = bundle;
+	if (hc->pri)
+		sprintf(hc->name, "l1oip-e1.%d", l1oip_cnt + 1);
+	else
+		sprintf(hc->name, "l1oip-s0.%d", l1oip_cnt + 1);
+
+	switch (codec[l1oip_cnt]) {
+	case 0: /* as is */
+	case 1: /* alaw */
+	case 2: /* ulaw */
+	case 3: /* 4bit */
+		break;
+	default:
+		printk(KERN_ERR "Codec(%d) not supported.\n",
+			codec[l1oip_cnt]);
+		return -EINVAL;
+	}
+	hc->codec = codec[l1oip_cnt];
+	if (debug & DEBUG_L1OIP_INIT)
+		printk(KERN_DEBUG "%s: using codec %d\n",
+			__func__, hc->codec);
+
+	if (id[l1oip_cnt] == 0) {
+		printk(KERN_WARNING "Warning: No 'id' value given or "
+			"0, this is highly unsecure. Please use 32 "
+			"bit randmom number 0x...\n");
+	}
+	hc->id = id[l1oip_cnt];
+	if (debug & DEBUG_L1OIP_INIT)
+		printk(KERN_DEBUG "%s: using id 0x%x\n", __func__, hc->id);
+
+	hc->ondemand = ondemand[l1oip_cnt];
+	if (hc->ondemand && !hc->id) {
+		printk(KERN_ERR "%s: ondemand option only allowed in "
+			"conjunction with non 0 ID\n", __func__);
+		return -EINVAL;
+	}
+
+	if (limit[l1oip_cnt])
+		hc->b_num = limit[l1oip_cnt];
+	if (!pri && hc->b_num > 2) {
+		printk(KERN_ERR "Maximum limit for BRI interface is 2 "
+			"channels.\n");
+		return -EINVAL;
+	}
+	if (pri && hc->b_num > 126) {
+		printk(KERN_ERR "Maximum limit for PRI interface is 126 "
+			"channels.\n");
+		return -EINVAL;
+	}
+	if (pri && hc->b_num > 30) {
+		printk(KERN_WARNING "Maximum limit for BRI interface is 30 "
+			"channels.\n");
+		printk(KERN_WARNING "Your selection of %d channels must be "
+			"supported by application.\n", hc->limit);
+	}
+
+	hc->remoteip = ip[l1oip_cnt<<2] << 24
+		     | ip[(l1oip_cnt<<2)+1] << 16
+		     | ip[(l1oip_cnt<<2)+2] << 8
+		     | ip[(l1oip_cnt<<2)+3];
+	hc->localport = port[l1oip_cnt]?:(L1OIP_DEFAULTPORT+l1oip_cnt);
+	if (remoteport[l1oip_cnt])
+		hc->remoteport = remoteport[l1oip_cnt];
+	else
+		hc->remoteport = hc->localport;
+	if (debug & DEBUG_L1OIP_INIT)
+		printk(KERN_DEBUG "%s: using local port %d remote ip "
+			"%d.%d.%d.%d port %d ondemand %d\n", __func__,
+			hc->localport, hc->remoteip >> 24,
+			(hc->remoteip >> 16) & 0xff,
+			(hc->remoteip >> 8) & 0xff, hc->remoteip & 0xff,
+			hc->remoteport, hc->ondemand);
+
+	dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
+	if (!dch)
+		return -ENOMEM;
+	dch->debug = debug;
+	mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, NULL);
+	dch->hw = hc;
+	if (pri)
+		dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
+	else
+		dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
+	dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
+	    (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
+	dch->dev.D.send = handle_dmsg;
+	dch->dev.D.ctrl = l1oip_dctrl;
+	dch->dev.nrbchan = hc->b_num;
+	dch->slot = hc->d_idx;
+	hc->chan[hc->d_idx].dch = dch;
+	i = 1;
+	for (ch = 0; ch < dch->dev.nrbchan; ch++) {
+		if (ch == 15)
+			i++;
+		bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
+		if (!bch) {
+			printk(KERN_ERR "%s: no memory for bchannel\n",
+			    __func__);
+			return -ENOMEM;
+		}
+		bch->nr = i + ch;
+		bch->slot = i + ch;
+		bch->debug = debug;
+		mISDN_initbchannel(bch, MAX_DATA_MEM);
+		bch->hw = hc;
+		bch->ch.send = handle_bmsg;
+		bch->ch.ctrl = l1oip_bctrl;
+		bch->ch.nr = i + ch;
+		list_add(&bch->ch.list, &dch->dev.bchannels);
+		hc->chan[i + ch].bch = bch;
+		test_and_set_bit(bch->nr & 0x1f,
+			&dch->dev.channelmap[bch->nr >> 5]);
+	}
+	ret = mISDN_register_device(&dch->dev, hc->name);
+	if (ret)
+		return ret;
+	hc->registered = 1;
+
+	if (debug & DEBUG_L1OIP_INIT)
+		printk(KERN_DEBUG "%s: Setting up network card(%d)\n",
+			__func__, l1oip_cnt + 1);
+	ret = l1oip_socket_open(hc);
+	if (ret)
+		return ret;
+
+	hc->keep_tl.function = (void *)l1oip_keepalive;
+	hc->keep_tl.data = (ulong)hc;
+	init_timer(&hc->keep_tl);
+	hc->keep_tl.expires = jiffies + 2*HZ; /* two seconds first time */
+	add_timer(&hc->keep_tl);
+
+	hc->timeout_tl.function = (void *)l1oip_timeout;
+	hc->timeout_tl.data = (ulong)hc;
+	init_timer(&hc->timeout_tl);
+	hc->timeout_on = 0; /* state that we have timer off */
+
+	return 0;
+}
+
+static int __init
+l1oip_init(void)
+{
+	int		pri, bundle;
+	struct l1oip		*hc;
+	int		ret;
+
+	printk(KERN_INFO "mISDN: Layer-1-over-IP driver Rev. %s\n",
+		l1oip_revision);
+
+	INIT_LIST_HEAD(&l1oip_ilist);
+	spin_lock_init(&l1oip_lock);
+
+	if (l1oip_4bit_alloc(ulaw))
+		return -ENOMEM;
+
+	l1oip_cnt = 0;
+	while (type[l1oip_cnt] && l1oip_cnt < MAX_CARDS) {
+		switch (type[l1oip_cnt] & 0xff) {
+		case 1:
+			pri = 0;
+			bundle = 0;
+			break;
+		case 2:
+			pri = 1;
+			bundle = 0;
+			break;
+		case 3:
+			pri = 0;
+			bundle = 1;
+			break;
+		case 4:
+			pri = 1;
+			bundle = 1;
+			break;
+		default:
+			printk(KERN_ERR "Card type(%d) not supported.\n",
+				type[l1oip_cnt] & 0xff);
+			l1oip_cleanup();
+			return -EINVAL;
+		}
+
+		if (debug & DEBUG_L1OIP_INIT)
+			printk(KERN_DEBUG "%s: interface %d is %s with %s.\n",
+				__func__, l1oip_cnt, pri?"PRI":"BRI",
+				bundle?"bundled IP packet for all B-channels"
+				 :"seperate IP packets for every B-channel");
+
+		hc = kzalloc(sizeof(struct l1oip), GFP_ATOMIC);
+		if (!hc) {
+			printk(KERN_ERR "No kmem for L1-over-IP driver.\n");
+			l1oip_cleanup();
+			return -ENOMEM;
+		}
+		INIT_WORK(&hc->workq, (void *)l1oip_send_bh);
+
+		spin_lock(&l1oip_lock);
+		list_add_tail(&hc->list, &l1oip_ilist);
+		spin_unlock(&l1oip_lock);
+
+		ret = init_card(hc, pri, bundle);
+		if (ret) {
+			l1oip_cleanup();
+			return ret;
+		}
+
+		l1oip_cnt++;
+	}
+	printk(KERN_INFO "%d virtual devices registered\n", l1oip_cnt);
+	return 0;
+}
+
+module_init(l1oip_init);
+module_exit(l1oip_cleanup);
+
-- 
cgit v1.2.3


From e40f51a36a6ca718e829c0933ab1e79333ac932e Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sat, 26 Jul 2008 17:47:53 -0700
Subject: netfilter: ebtables: use nf_register_hooks()

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/netfilter/ebtable_filter.c | 18 +++++-------------
 net/bridge/netfilter/ebtable_nat.c    | 18 +++++-------------
 2 files changed, 10 insertions(+), 26 deletions(-)

diff --git a/net/bridge/netfilter/ebtable_filter.c b/net/bridge/netfilter/ebtable_filter.c
index 690bc3ab186..1a58af51a2e 100644
--- a/net/bridge/netfilter/ebtable_filter.c
+++ b/net/bridge/netfilter/ebtable_filter.c
@@ -93,28 +93,20 @@ static struct nf_hook_ops ebt_ops_filter[] __read_mostly = {
 
 static int __init ebtable_filter_init(void)
 {
-	int i, j, ret;
+	int ret;
 
 	ret = ebt_register_table(&frame_filter);
 	if (ret < 0)
 		return ret;
-	for (i = 0; i < ARRAY_SIZE(ebt_ops_filter); i++)
-		if ((ret = nf_register_hook(&ebt_ops_filter[i])) < 0)
-			goto cleanup;
-	return ret;
-cleanup:
-	for (j = 0; j < i; j++)
-		nf_unregister_hook(&ebt_ops_filter[j]);
-	ebt_unregister_table(&frame_filter);
+	ret = nf_register_hooks(ebt_ops_filter, ARRAY_SIZE(ebt_ops_filter));
+	if (ret < 0)
+		ebt_unregister_table(&frame_filter);
 	return ret;
 }
 
 static void __exit ebtable_filter_fini(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ebt_ops_filter); i++)
-		nf_unregister_hook(&ebt_ops_filter[i]);
+	nf_unregister_hooks(ebt_ops_filter, ARRAY_SIZE(ebt_ops_filter));
 	ebt_unregister_table(&frame_filter);
 }
 
diff --git a/net/bridge/netfilter/ebtable_nat.c b/net/bridge/netfilter/ebtable_nat.c
index 5b495fe2d0b..f60c1e78e57 100644
--- a/net/bridge/netfilter/ebtable_nat.c
+++ b/net/bridge/netfilter/ebtable_nat.c
@@ -100,28 +100,20 @@ static struct nf_hook_ops ebt_ops_nat[] __read_mostly = {
 
 static int __init ebtable_nat_init(void)
 {
-	int i, ret, j;
+	int ret;
 
 	ret = ebt_register_table(&frame_nat);
 	if (ret < 0)
 		return ret;
-	for (i = 0; i < ARRAY_SIZE(ebt_ops_nat); i++)
-		if ((ret = nf_register_hook(&ebt_ops_nat[i])) < 0)
-			goto cleanup;
-	return ret;
-cleanup:
-	for (j = 0; j < i; j++)
-		nf_unregister_hook(&ebt_ops_nat[j]);
-	ebt_unregister_table(&frame_nat);
+	ret = nf_register_hooks(ebt_ops_nat, ARRAY_SIZE(ebt_ops_nat));
+	if (ret < 0)
+		ebt_unregister_table(&frame_nat);
 	return ret;
 }
 
 static void __exit ebtable_nat_fini(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ebt_ops_nat); i++)
-		nf_unregister_hook(&ebt_ops_nat[i]);
+	nf_unregister_hooks(ebt_ops_nat, ARRAY_SIZE(ebt_ops_nat));
 	ebt_unregister_table(&frame_nat);
 }
 
-- 
cgit v1.2.3


From 6c5a9d2e1599a099b0e47235a1c1502162b14310 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sat, 26 Jul 2008 17:48:15 -0700
Subject: selinux: use nf_register_hooks()

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 security/selinux/hooks.c | 27 ++++++++-------------------
 1 file changed, 8 insertions(+), 19 deletions(-)

diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 63f131fc42e..df0515dd4d1 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -5670,27 +5670,20 @@ static struct nf_hook_ops selinux_ipv6_ops[] = {
 static int __init selinux_nf_ip_init(void)
 {
 	int err = 0;
-	u32 iter;
 
 	if (!selinux_enabled)
 		goto out;
 
 	printk(KERN_DEBUG "SELinux:  Registering netfilter hooks\n");
 
-	for (iter = 0; iter < ARRAY_SIZE(selinux_ipv4_ops); iter++) {
-		err = nf_register_hook(&selinux_ipv4_ops[iter]);
-		if (err)
-			panic("SELinux: nf_register_hook for IPv4: error %d\n",
-			      err);
-	}
+	err = nf_register_hooks(selinux_ipv4_ops, ARRAY_SIZE(selinux_ipv4_ops));
+	if (err)
+		panic("SELinux: nf_register_hooks for IPv4: error %d\n", err);
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-	for (iter = 0; iter < ARRAY_SIZE(selinux_ipv6_ops); iter++) {
-		err = nf_register_hook(&selinux_ipv6_ops[iter]);
-		if (err)
-			panic("SELinux: nf_register_hook for IPv6: error %d\n",
-			      err);
-	}
+	err = nf_register_hooks(selinux_ipv6_ops, ARRAY_SIZE(selinux_ipv6_ops));
+	if (err)
+		panic("SELinux: nf_register_hooks for IPv6: error %d\n", err);
 #endif	/* IPV6 */
 
 out:
@@ -5702,15 +5695,11 @@ __initcall(selinux_nf_ip_init);
 #ifdef CONFIG_SECURITY_SELINUX_DISABLE
 static void selinux_nf_ip_exit(void)
 {
-	u32 iter;
-
 	printk(KERN_DEBUG "SELinux:  Unregistering netfilter hooks\n");
 
-	for (iter = 0; iter < ARRAY_SIZE(selinux_ipv4_ops); iter++)
-		nf_unregister_hook(&selinux_ipv4_ops[iter]);
+	nf_unregister_hooks(selinux_ipv4_ops, ARRAY_SIZE(selinux_ipv4_ops));
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-	for (iter = 0; iter < ARRAY_SIZE(selinux_ipv6_ops); iter++)
-		nf_unregister_hook(&selinux_ipv6_ops[iter]);
+	nf_unregister_hooks(selinux_ipv6_ops, ARRAY_SIZE(selinux_ipv6_ops));
 #endif	/* IPV6 */
 }
 #endif
-- 
cgit v1.2.3


From f858b4869a9136dd28cc2ab37f8b89268cc99462 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sat, 26 Jul 2008 17:48:38 -0700
Subject: netfilter: ip{,6}tables_security: fix future section mismatch

Currently not visible, because NET_NS is mutually exclusive with SYSFS
which is required by SECURITY.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/netfilter/iptable_security.c  | 2 +-
 net/ipv6/netfilter/ip6table_security.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/netfilter/iptable_security.c b/net/ipv4/netfilter/iptable_security.c
index 2b472ac2263..db6d312128e 100644
--- a/net/ipv4/netfilter/iptable_security.c
+++ b/net/ipv4/netfilter/iptable_security.c
@@ -32,7 +32,7 @@ static struct
 	struct ipt_replace repl;
 	struct ipt_standard entries[3];
 	struct ipt_error term;
-} initial_table __initdata = {
+} initial_table __net_initdata = {
 	.repl = {
 		.name = "security",
 		.valid_hooks = SECURITY_VALID_HOOKS,
diff --git a/net/ipv6/netfilter/ip6table_security.c b/net/ipv6/netfilter/ip6table_security.c
index a07abee3049..6e7131036bc 100644
--- a/net/ipv6/netfilter/ip6table_security.c
+++ b/net/ipv6/netfilter/ip6table_security.c
@@ -31,7 +31,7 @@ static struct
 	struct ip6t_replace repl;
 	struct ip6t_standard entries[3];
 	struct ip6t_error term;
-} initial_table __initdata = {
+} initial_table __net_initdata = {
 	.repl = {
 		.name = "security",
 		.valid_hooks = SECURITY_VALID_HOOKS,
-- 
cgit v1.2.3


From 3918fed5f31213067c1c345bd904e1ea369e6819 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sat, 26 Jul 2008 17:48:59 -0700
Subject: netfilter: arptables in netns for real

IN, FORWARD -- grab netns from in device, OUT -- from out device.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/netfilter/arptable_filter.c | 39 +++++++++++++++++++++++++++---------
 1 file changed, 30 insertions(+), 9 deletions(-)

diff --git a/net/ipv4/netfilter/arptable_filter.c b/net/ipv4/netfilter/arptable_filter.c
index 3be4d07e7ed..082f5dd3156 100644
--- a/net/ipv4/netfilter/arptable_filter.c
+++ b/net/ipv4/netfilter/arptable_filter.c
@@ -55,32 +55,53 @@ static struct xt_table packet_filter = {
 };
 
 /* The work comes in here from netfilter.c */
-static unsigned int arpt_hook(unsigned int hook,
-			      struct sk_buff *skb,
-			      const struct net_device *in,
-			      const struct net_device *out,
-			      int (*okfn)(struct sk_buff *))
+static unsigned int arpt_in_hook(unsigned int hook,
+				 struct sk_buff *skb,
+				 const struct net_device *in,
+				 const struct net_device *out,
+				 int (*okfn)(struct sk_buff *))
 {
-	return arpt_do_table(skb, hook, in, out, init_net.ipv4.arptable_filter);
+	return arpt_do_table(skb, hook, in, out,
+			     dev_net(in)->ipv4.arptable_filter);
+}
+
+static unsigned int arpt_out_hook(unsigned int hook,
+				  struct sk_buff *skb,
+				  const struct net_device *in,
+				  const struct net_device *out,
+				  int (*okfn)(struct sk_buff *))
+{
+	return arpt_do_table(skb, hook, in, out,
+			     dev_net(out)->ipv4.arptable_filter);
+}
+
+static unsigned int arpt_forward_hook(unsigned int hook,
+				      struct sk_buff *skb,
+				      const struct net_device *in,
+				      const struct net_device *out,
+				      int (*okfn)(struct sk_buff *))
+{
+	return arpt_do_table(skb, hook, in, out,
+			     dev_net(in)->ipv4.arptable_filter);
 }
 
 static struct nf_hook_ops arpt_ops[] __read_mostly = {
 	{
-		.hook		= arpt_hook,
+		.hook		= arpt_in_hook,
 		.owner		= THIS_MODULE,
 		.pf		= NF_ARP,
 		.hooknum	= NF_ARP_IN,
 		.priority	= NF_IP_PRI_FILTER,
 	},
 	{
-		.hook		= arpt_hook,
+		.hook		= arpt_out_hook,
 		.owner		= THIS_MODULE,
 		.pf		= NF_ARP,
 		.hooknum	= NF_ARP_OUT,
 		.priority	= NF_IP_PRI_FILTER,
 	},
 	{
-		.hook		= arpt_hook,
+		.hook		= arpt_forward_hook,
 		.owner		= THIS_MODULE,
 		.pf		= NF_ARP,
 		.hooknum	= NF_ARP_FORWARD,
-- 
cgit v1.2.3


From 93bc4e89c260d91576840c4881d1066d84ccd422 Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Sat, 26 Jul 2008 17:49:33 -0700
Subject: netfilter: fix double-free and use-after free

As suggested by Patrick McHardy, introduce a __krealloc() that doesn't
free the original buffer to fix a double-free and use-after-free bug
introduced by me in netfilter that uses RCU.

Reported-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Tested-by: Dieter Ries <clip2@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/slab.h                |  1 +
 mm/util.c                           | 44 ++++++++++++++++++++++++++++---------
 net/netfilter/nf_conntrack_extend.c |  2 +-
 3 files changed, 36 insertions(+), 11 deletions(-)

diff --git a/include/linux/slab.h b/include/linux/slab.h
index 9aa90a6f20e..be6f1d40b66 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -96,6 +96,7 @@ int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr);
 /*
  * Common kmalloc functions provided by all allocators
  */
+void * __must_check __krealloc(const void *, size_t, gfp_t);
 void * __must_check krealloc(const void *, size_t, gfp_t);
 void kfree(const void *);
 size_t ksize(const void *);
diff --git a/mm/util.c b/mm/util.c
index 8f18683825b..6ef9e9943f6 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -68,25 +68,22 @@ void *kmemdup(const void *src, size_t len, gfp_t gfp)
 EXPORT_SYMBOL(kmemdup);
 
 /**
- * krealloc - reallocate memory. The contents will remain unchanged.
+ * __krealloc - like krealloc() but don't free @p.
  * @p: object to reallocate memory for.
  * @new_size: how many bytes of memory are required.
  * @flags: the type of memory to allocate.
  *
- * The contents of the object pointed to are preserved up to the
- * lesser of the new and old sizes.  If @p is %NULL, krealloc()
- * behaves exactly like kmalloc().  If @size is 0 and @p is not a
- * %NULL pointer, the object pointed to is freed.
+ * This function is like krealloc() except it never frees the originally
+ * allocated buffer. Use this if you don't want to free the buffer immediately
+ * like, for example, with RCU.
  */
-void *krealloc(const void *p, size_t new_size, gfp_t flags)
+void *__krealloc(const void *p, size_t new_size, gfp_t flags)
 {
 	void *ret;
 	size_t ks = 0;
 
-	if (unlikely(!new_size)) {
-		kfree(p);
+	if (unlikely(!new_size))
 		return ZERO_SIZE_PTR;
-	}
 
 	if (p)
 		ks = ksize(p);
@@ -95,10 +92,37 @@ void *krealloc(const void *p, size_t new_size, gfp_t flags)
 		return (void *)p;
 
 	ret = kmalloc_track_caller(new_size, flags);
-	if (ret && p) {
+	if (ret && p)
 		memcpy(ret, p, ks);
+
+	return ret;
+}
+EXPORT_SYMBOL(__krealloc);
+
+/**
+ * krealloc - reallocate memory. The contents will remain unchanged.
+ * @p: object to reallocate memory for.
+ * @new_size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate.
+ *
+ * The contents of the object pointed to are preserved up to the
+ * lesser of the new and old sizes.  If @p is %NULL, krealloc()
+ * behaves exactly like kmalloc().  If @size is 0 and @p is not a
+ * %NULL pointer, the object pointed to is freed.
+ */
+void *krealloc(const void *p, size_t new_size, gfp_t flags)
+{
+	void *ret;
+
+	if (unlikely(!new_size)) {
 		kfree(p);
+		return ZERO_SIZE_PTR;
 	}
+
+	ret = __krealloc(p, new_size, flags);
+	if (ret && p != ret)
+		kfree(p);
+
 	return ret;
 }
 EXPORT_SYMBOL(krealloc);
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index 3469bc71a38..c956ef7eeec 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -95,7 +95,7 @@ void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
 	newlen = newoff + t->len;
 	rcu_read_unlock();
 
-	new = krealloc(ct->ext, newlen, gfp);
+	new = __krealloc(ct->ext, newlen, gfp);
 	if (!new)
 		return NULL;
 
-- 
cgit v1.2.3


From 6c64825bf40ecc1b01610762ca736b18c8a9db92 Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Sat, 26 Jul 2008 17:50:05 -0700
Subject: netfilter: nf_conntrack_extend: avoid unnecessary "ct->ext"
 dereferences

As Linus points out, "ct->ext" and "new" are always equal, avoid unnecessary
dereferences and use "new" directly.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/nf_conntrack_extend.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index c956ef7eeec..4b2c769d555 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -115,10 +115,10 @@ void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
 		ct->ext = new;
 	}
 
-	ct->ext->offset[id] = newoff;
-	ct->ext->len = newlen;
-	memset((void *)ct->ext + newoff, 0, newlen - newoff);
-	return (void *)ct->ext + newoff;
+	new->offset[id] = newoff;
+	new->len = newlen;
+	memset((void *)new + newoff, 0, newlen - newoff);
+	return (void *)new + newoff;
 }
 EXPORT_SYMBOL(__nf_ct_ext_add);
 
-- 
cgit v1.2.3


From 6c3b8fc618905d7599dcc514c99ce4293d476f39 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Sat, 26 Jul 2008 17:51:06 -0700
Subject: netns: fix ip_rt_frag_needed rt_is_expired

Running recent kernels, and using a particular vpn gateway, I've been
having to edit my mails down to get them accepted by the smtp server.

Git bisect led to commit e84f84f276473dcc673f360e8ff3203148bdf0e2 -
netns: place rt_genid into struct net.  The conversion from a != test
to rt_is_expired() put one negative too many: and now my mail works.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/route.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index e4ab0ac94f9..a507c5e27d0 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1502,7 +1502,7 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph,
 				    rth->fl.iif != 0 ||
 				    dst_metric_locked(&rth->u.dst, RTAX_MTU) ||
 				    !net_eq(dev_net(rth->u.dst.dev), net) ||
-				    !rt_is_expired(rth))
+				    rt_is_expired(rth))
 					continue;
 
 				if (new_mtu < 68 || new_mtu >= old_mtu) {
-- 
cgit v1.2.3


From d70b67c8bc72ee23b55381bd6a884f4796692f77 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Wed, 2 Jul 2008 21:30:15 +0200
Subject: [patch] vfs: fix lookup on deleted directory

Lookup can install a child dentry for a deleted directory.  This keeps
the directory dentry alive, and the inode pinned in the cache and on
disk, even after all external references have gone away.

This isn't a big problem normally, since memory pressure or umount
will clear out the directory dentry and its children, releasing the
inode.  But for UBIFS this causes problems because its orphan area can
overflow.

Fix this by returning ENOENT for all lookups on a S_DEAD directory
before creating a child dentry.

Thanks to Zoltan Sogor for noticing this while testing UBIFS, and
Artem for the excellent analysis of the problem and testing.

Reported-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/namei.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index 01e67dddcc3..3b26a240ade 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -519,7 +519,14 @@ static struct dentry * real_lookup(struct dentry * parent, struct qstr * name, s
 	 */
 	result = d_lookup(parent, name);
 	if (!result) {
-		struct dentry * dentry = d_alloc(parent, name);
+		struct dentry *dentry;
+
+		/* Don't create child dentry for a dead directory. */
+		result = ERR_PTR(-ENOENT);
+		if (IS_DEADDIR(dir))
+			goto out_unlock;
+
+		dentry = d_alloc(parent, name);
 		result = ERR_PTR(-ENOMEM);
 		if (dentry) {
 			result = dir->i_op->lookup(dir, dentry, nd);
@@ -528,6 +535,7 @@ static struct dentry * real_lookup(struct dentry * parent, struct qstr * name, s
 			else
 				result = dentry;
 		}
+out_unlock:
 		mutex_unlock(&dir->i_mutex);
 		return result;
 	}
@@ -1317,7 +1325,14 @@ static struct dentry *__lookup_hash(struct qstr *name,
 
 	dentry = cached_lookup(base, name, nd);
 	if (!dentry) {
-		struct dentry *new = d_alloc(base, name);
+		struct dentry *new;
+
+		/* Don't create child dentry for a dead directory. */
+		dentry = ERR_PTR(-ENOENT);
+		if (IS_DEADDIR(inode))
+			goto out;
+
+		new = d_alloc(base, name);
 		dentry = ERR_PTR(-ENOMEM);
 		if (!new)
 			goto out;
-- 
cgit v1.2.3


From d2d9648ec6858e19d16a0b16da62534e85888653 Mon Sep 17 00:00:00 2001
From: Denys Vlasenko <vda.linux@googlemail.com>
Date: Tue, 1 Jul 2008 14:16:09 +0200
Subject: [PATCH] reuse xxx_fifo_fops for xxx_pipe_fops

Merge fifo and pipe file_operations.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/fifo.c          |  8 ++++----
 fs/pipe.c          | 51 ++++++++-------------------------------------------
 include/linux/fs.h |  6 +++---
 3 files changed, 15 insertions(+), 50 deletions(-)

diff --git a/fs/fifo.c b/fs/fifo.c
index 9785e36f81e..987bf941149 100644
--- a/fs/fifo.c
+++ b/fs/fifo.c
@@ -57,7 +57,7 @@ static int fifo_open(struct inode *inode, struct file *filp)
 	 *  POSIX.1 says that O_NONBLOCK means return with the FIFO
 	 *  opened, even when there is no process writing the FIFO.
 	 */
-		filp->f_op = &read_fifo_fops;
+		filp->f_op = &read_pipefifo_fops;
 		pipe->r_counter++;
 		if (pipe->readers++ == 0)
 			wake_up_partner(inode);
@@ -86,7 +86,7 @@ static int fifo_open(struct inode *inode, struct file *filp)
 		if ((filp->f_flags & O_NONBLOCK) && !pipe->readers)
 			goto err;
 
-		filp->f_op = &write_fifo_fops;
+		filp->f_op = &write_pipefifo_fops;
 		pipe->w_counter++;
 		if (!pipe->writers++)
 			wake_up_partner(inode);
@@ -105,7 +105,7 @@ static int fifo_open(struct inode *inode, struct file *filp)
 	 *  This implementation will NEVER block on a O_RDWR open, since
 	 *  the process can at least talk to itself.
 	 */
-		filp->f_op = &rdwr_fifo_fops;
+		filp->f_op = &rdwr_pipefifo_fops;
 
 		pipe->readers++;
 		pipe->writers++;
@@ -151,5 +151,5 @@ err_nocleanup:
  * depending on the access mode of the file...
  */
 const struct file_operations def_fifo_fops = {
-	.open		= fifo_open,	/* will set read or write pipe_fops */
+	.open		= fifo_open,	/* will set read_ or write_pipefifo_fops */
 };
diff --git a/fs/pipe.c b/fs/pipe.c
index 10c4e9aa5c4..fcba6542b8d 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -777,45 +777,10 @@ pipe_rdwr_open(struct inode *inode, struct file *filp)
 /*
  * The file_operations structs are not static because they
  * are also used in linux/fs/fifo.c to do operations on FIFOs.
+ *
+ * Pipes reuse fifos' file_operations structs.
  */
-const struct file_operations read_fifo_fops = {
-	.llseek		= no_llseek,
-	.read		= do_sync_read,
-	.aio_read	= pipe_read,
-	.write		= bad_pipe_w,
-	.poll		= pipe_poll,
-	.unlocked_ioctl	= pipe_ioctl,
-	.open		= pipe_read_open,
-	.release	= pipe_read_release,
-	.fasync		= pipe_read_fasync,
-};
-
-const struct file_operations write_fifo_fops = {
-	.llseek		= no_llseek,
-	.read		= bad_pipe_r,
-	.write		= do_sync_write,
-	.aio_write	= pipe_write,
-	.poll		= pipe_poll,
-	.unlocked_ioctl	= pipe_ioctl,
-	.open		= pipe_write_open,
-	.release	= pipe_write_release,
-	.fasync		= pipe_write_fasync,
-};
-
-const struct file_operations rdwr_fifo_fops = {
-	.llseek		= no_llseek,
-	.read		= do_sync_read,
-	.aio_read	= pipe_read,
-	.write		= do_sync_write,
-	.aio_write	= pipe_write,
-	.poll		= pipe_poll,
-	.unlocked_ioctl	= pipe_ioctl,
-	.open		= pipe_rdwr_open,
-	.release	= pipe_rdwr_release,
-	.fasync		= pipe_rdwr_fasync,
-};
-
-static const struct file_operations read_pipe_fops = {
+const struct file_operations read_pipefifo_fops = {
 	.llseek		= no_llseek,
 	.read		= do_sync_read,
 	.aio_read	= pipe_read,
@@ -827,7 +792,7 @@ static const struct file_operations read_pipe_fops = {
 	.fasync		= pipe_read_fasync,
 };
 
-static const struct file_operations write_pipe_fops = {
+const struct file_operations write_pipefifo_fops = {
 	.llseek		= no_llseek,
 	.read		= bad_pipe_r,
 	.write		= do_sync_write,
@@ -839,7 +804,7 @@ static const struct file_operations write_pipe_fops = {
 	.fasync		= pipe_write_fasync,
 };
 
-static const struct file_operations rdwr_pipe_fops = {
+const struct file_operations rdwr_pipefifo_fops = {
 	.llseek		= no_llseek,
 	.read		= do_sync_read,
 	.aio_read	= pipe_read,
@@ -927,7 +892,7 @@ static struct inode * get_pipe_inode(void)
 	inode->i_pipe = pipe;
 
 	pipe->readers = pipe->writers = 1;
-	inode->i_fop = &rdwr_pipe_fops;
+	inode->i_fop = &rdwr_pipefifo_fops;
 
 	/*
 	 * Mark the inode dirty from the very beginning,
@@ -978,7 +943,7 @@ struct file *create_write_pipe(int flags)
 	d_instantiate(dentry, inode);
 
 	err = -ENFILE;
-	f = alloc_file(pipe_mnt, dentry, FMODE_WRITE, &write_pipe_fops);
+	f = alloc_file(pipe_mnt, dentry, FMODE_WRITE, &write_pipefifo_fops);
 	if (!f)
 		goto err_dentry;
 	f->f_mapping = inode->i_mapping;
@@ -1020,7 +985,7 @@ struct file *create_read_pipe(struct file *wrf, int flags)
 
 	f->f_pos = 0;
 	f->f_flags = O_RDONLY | (flags & O_NONBLOCK);
-	f->f_op = &read_pipe_fops;
+	f->f_op = &read_pipefifo_fops;
 	f->f_mode = FMODE_READ;
 	f->f_version = 0;
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 53d2edb709b..7721a2ac9c0 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1696,9 +1696,9 @@ extern void init_special_inode(struct inode *, umode_t, dev_t);
 extern void make_bad_inode(struct inode *);
 extern int is_bad_inode(struct inode *);
 
-extern const struct file_operations read_fifo_fops;
-extern const struct file_operations write_fifo_fops;
-extern const struct file_operations rdwr_fifo_fops;
+extern const struct file_operations read_pipefifo_fops;
+extern const struct file_operations write_pipefifo_fops;
+extern const struct file_operations rdwr_pipefifo_fops;
 
 extern int fs_may_remount_ro(struct super_block *);
 
-- 
cgit v1.2.3


From 7ac6cd653d7c31ad6b7bb5b88c549c4ebf628c34 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 1 Jul 2008 23:07:54 +0200
Subject: [patch] hppfs: remove hppfs_permission

hppfs_permission() is equivalent to the '.permission == NULL' case.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/hppfs/hppfs.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index 65077aa90f0..2b3d1828db9 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -655,20 +655,13 @@ static void *hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
 	return proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
 }
 
-int hppfs_permission(struct inode *inode, int mask, struct nameidata *nd)
-{
-	return generic_permission(inode, mask, NULL);
-}
-
 static const struct inode_operations hppfs_dir_iops = {
 	.lookup		= hppfs_lookup,
-	.permission	= hppfs_permission,
 };
 
 static const struct inode_operations hppfs_link_iops = {
 	.readlink	= hppfs_readlink,
 	.follow_link	= hppfs_follow_link,
-	.permission	= hppfs_permission,
 };
 
 static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
-- 
cgit v1.2.3


From 734550921e9b7ab924a43aa3d0bd4239dac4fbf1 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 14 Jul 2008 21:22:20 -0400
Subject: [PATCH] beginning of sysctl cleanup - ctl_table_set

New object: set of sysctls [currently - root and per-net-ns].
Contains: pointer to parent set, list of tables and "should I see this set?"
method (->is_seen(set)).
Current lists of tables are subsumed by that; net-ns contains such a beast.
->lookup() for ctl_table_root returns pointer to ctl_table_set instead of
that to ->list of that ctl_table_set.

[folded compile fixes by rdd for configs without sysctl]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 include/linux/sysctl.h      | 15 +++++++++++++--
 include/net/net_namespace.h |  4 +++-
 kernel/sysctl.c             | 41 +++++++++++++++++++++++++++++++----------
 net/sysctl_net.c            | 22 ++++++++++------------
 4 files changed, 57 insertions(+), 25 deletions(-)

diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 24141b4d1a1..c1e0cf408af 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -947,6 +947,16 @@ struct ctl_table;
 struct nsproxy;
 struct ctl_table_root;
 
+struct ctl_table_set {
+	struct list_head list;
+	struct ctl_table_set *parent;
+	int (*is_seen)(struct ctl_table_set *);
+};
+
+extern void setup_sysctl_set(struct ctl_table_set *p,
+	struct ctl_table_set *parent,
+	int (*is_seen)(struct ctl_table_set *));
+
 extern struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev);
 extern struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
 						struct ctl_table_header *prev);
@@ -1049,8 +1059,8 @@ struct ctl_table
 
 struct ctl_table_root {
 	struct list_head root_list;
-	struct list_head header_list;
-	struct list_head *(*lookup)(struct ctl_table_root *root,
+	struct ctl_table_set default_set;
+	struct ctl_table_set *(*lookup)(struct ctl_table_root *root,
 					   struct nsproxy *namespaces);
 	int (*permissions)(struct ctl_table_root *root,
 			struct nsproxy *namespaces, struct ctl_table *table);
@@ -1066,6 +1076,7 @@ struct ctl_table_header
 	struct completion *unregistering;
 	struct ctl_table *ctl_table_arg;
 	struct ctl_table_root *root;
+	struct ctl_table_set *set;
 };
 
 /* struct ctl_path describes where in the hierarchy a table is added */
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 3855620b78a..a8eb43cf0c7 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -38,7 +38,9 @@ struct net {
 	struct proc_dir_entry 	*proc_net;
 	struct proc_dir_entry 	*proc_net_stat;
 
-	struct list_head	sysctl_table_headers;
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_set	sysctls;
+#endif
 
 	struct net_device       *loopback_dev;          /* The loopback */
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 35a50db9b6c..8ee4a0619fb 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -160,12 +160,13 @@ static struct ctl_table root_table[];
 static struct ctl_table_root sysctl_table_root;
 static struct ctl_table_header root_table_header = {
 	.ctl_table = root_table,
-	.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.header_list),
+	.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list),
 	.root = &sysctl_table_root,
+	.set = &sysctl_table_root.default_set,
 };
 static struct ctl_table_root sysctl_table_root = {
 	.root_list = LIST_HEAD_INIT(sysctl_table_root.root_list),
-	.header_list = LIST_HEAD_INIT(root_table_header.ctl_entry),
+	.default_set.list = LIST_HEAD_INIT(root_table_header.ctl_entry),
 };
 
 static struct ctl_table kern_table[];
@@ -1403,14 +1404,20 @@ void sysctl_head_finish(struct ctl_table_header *head)
 	spin_unlock(&sysctl_lock);
 }
 
+static struct ctl_table_set *
+lookup_header_set(struct ctl_table_root *root, struct nsproxy *namespaces)
+{
+	struct ctl_table_set *set = &root->default_set;
+	if (root->lookup)
+		set = root->lookup(root, namespaces);
+	return set;
+}
+
 static struct list_head *
 lookup_header_list(struct ctl_table_root *root, struct nsproxy *namespaces)
 {
-	struct list_head *header_list;
-	header_list = &root->header_list;
-	if (root->lookup)
-		header_list = root->lookup(root, namespaces);
-	return header_list;
+	struct ctl_table_set *set = lookup_header_set(root, namespaces);
+	return &set->list;
 }
 
 struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
@@ -1720,7 +1727,6 @@ struct ctl_table_header *__register_sysctl_paths(
 	struct nsproxy *namespaces,
 	const struct ctl_path *path, struct ctl_table *table)
 {
-	struct list_head *header_list;
 	struct ctl_table_header *header;
 	struct ctl_table *new, **prevp;
 	unsigned int n, npath;
@@ -1772,8 +1778,8 @@ struct ctl_table_header *__register_sysctl_paths(
 	}
 #endif
 	spin_lock(&sysctl_lock);
-	header_list = lookup_header_list(root, namespaces);
-	list_add_tail(&header->ctl_entry, header_list);
+	header->set = lookup_header_set(root, namespaces);
+	list_add_tail(&header->ctl_entry, &header->set->list);
 	spin_unlock(&sysctl_lock);
 
 	return header;
@@ -1832,6 +1838,15 @@ void unregister_sysctl_table(struct ctl_table_header * header)
 	kfree(header);
 }
 
+void setup_sysctl_set(struct ctl_table_set *p,
+	struct ctl_table_set *parent,
+	int (*is_seen)(struct ctl_table_set *))
+{
+	INIT_LIST_HEAD(&p->list);
+	p->parent = parent ? parent : &sysctl_table_root.default_set;
+	p->is_seen = is_seen;
+}
+
 #else /* !CONFIG_SYSCTL */
 struct ctl_table_header *register_sysctl_table(struct ctl_table * table)
 {
@@ -1848,6 +1863,12 @@ void unregister_sysctl_table(struct ctl_table_header * table)
 {
 }
 
+void setup_sysctl_set(struct ctl_table_set *p,
+	struct ctl_table_set *parent,
+	int (*is_seen)(struct ctl_table_set *))
+{
+}
+
 #endif /* CONFIG_SYSCTL */
 
 /*
diff --git a/net/sysctl_net.c b/net/sysctl_net.c
index 63ada437fc2..cefbc367d8b 100644
--- a/net/sysctl_net.c
+++ b/net/sysctl_net.c
@@ -29,10 +29,15 @@
 #include <linux/if_tr.h>
 #endif
 
-static struct list_head *
+static struct ctl_table_set *
 net_ctl_header_lookup(struct ctl_table_root *root, struct nsproxy *namespaces)
 {
-	return &namespaces->net_ns->sysctl_table_headers;
+	return &namespaces->net_ns->sysctls;
+}
+
+static int is_seen(struct ctl_table_set *set)
+{
+	return &current->nsproxy->net_ns->sysctls == set;
 }
 
 /* Return standard mode bits for table entry. */
@@ -53,13 +58,6 @@ static struct ctl_table_root net_sysctl_root = {
 	.permissions = net_ctl_permissions,
 };
 
-static LIST_HEAD(net_sysctl_ro_tables);
-static struct list_head *net_ctl_ro_header_lookup(struct ctl_table_root *root,
-		struct nsproxy *namespaces)
-{
-	return &net_sysctl_ro_tables;
-}
-
 static int net_ctl_ro_header_perms(struct ctl_table_root *root,
 		struct nsproxy *namespaces, struct ctl_table *table)
 {
@@ -70,19 +68,18 @@ static int net_ctl_ro_header_perms(struct ctl_table_root *root,
 }
 
 static struct ctl_table_root net_sysctl_ro_root = {
-	.lookup = net_ctl_ro_header_lookup,
 	.permissions = net_ctl_ro_header_perms,
 };
 
 static int sysctl_net_init(struct net *net)
 {
-	INIT_LIST_HEAD(&net->sysctl_table_headers);
+	setup_sysctl_set(&net->sysctls, NULL, is_seen);
 	return 0;
 }
 
 static void sysctl_net_exit(struct net *net)
 {
-	WARN_ON(!list_empty(&net->sysctl_table_headers));
+	WARN_ON(!list_empty(&net->sysctls.list));
 	return;
 }
 
@@ -98,6 +95,7 @@ static __init int sysctl_init(void)
 	if (ret)
 		goto out;
 	register_sysctl_root(&net_sysctl_root);
+	setup_sysctl_set(&net_sysctl_ro_root.default_set, NULL, NULL);
 	register_sysctl_root(&net_sysctl_ro_root);
 out:
 	return ret;
-- 
cgit v1.2.3


From f7e6ced4061da509f737541ca4dbd44d83a6e82f Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 15 Jul 2008 01:44:23 -0400
Subject: [PATCH] allow delayed freeing of ctl_table_header

Refcount the sucker; instead of freeing it by the end of unregistration
just drop the refcount and free only when it hits zero.  Make sure that
we _always_ make ->unregistering non-NULL in start_unregistering().

That allows anybody to get a reference to such puppy, preventing its
freeing and reuse.  It does *not* block unregistration.  Anybody who
holds such a reference can
	* try to grab a "use" reference (ctl_head_grab()); that will
succeeds if and only if it hadn't entered unregistration yet.  If it
succeeds, we can use it in all normal ways until we release the "use"
reference (with ctl_head_finish()).  Note that this relies on having
->unregistering become non-NULL in all cases when one starts to unregister
the sucker.
	* keep pointers to ctl_table entries; they *can* be freed if
the entire thing is unregistered.  However, if ctl_head_grab() succeeds,
we know that unregistration had not happened (and will not happen until
ctl_head_finish()) and such pointers can be used safely.

IOW, now we can have inodes under /proc/sys keep references to ctl_table
entries, protecting them with references to ctl_table_header and
grabbing the latter for the duration of operations that require access
to ctl_table.  That won't cause deadlocks, since unregistration will not
be stopped by mere keeping a reference to ctl_table_header.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 include/linux/sysctl.h |  6 ++++++
 kernel/sysctl.c        | 37 ++++++++++++++++++++++++++++++++++++-
 2 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index c1e0cf408af..956264d09ba 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -957,6 +957,11 @@ extern void setup_sysctl_set(struct ctl_table_set *p,
 	struct ctl_table_set *parent,
 	int (*is_seen)(struct ctl_table_set *));
 
+struct ctl_table_header;
+
+extern void sysctl_head_get(struct ctl_table_header *);
+extern void sysctl_head_put(struct ctl_table_header *);
+extern struct ctl_table_header *sysctl_head_grab(struct ctl_table_header *);
 extern struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev);
 extern struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
 						struct ctl_table_header *prev);
@@ -1073,6 +1078,7 @@ struct ctl_table_header
 	struct ctl_table *ctl_table;
 	struct list_head ctl_entry;
 	int used;
+	int count;
 	struct completion *unregistering;
 	struct ctl_table *ctl_table_arg;
 	struct ctl_table_root *root;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 8ee4a0619fb..60d9357e717 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1387,6 +1387,9 @@ static void start_unregistering(struct ctl_table_header *p)
 		spin_unlock(&sysctl_lock);
 		wait_for_completion(&wait);
 		spin_lock(&sysctl_lock);
+	} else {
+		/* anything non-NULL; we'll never dereference it */
+		p->unregistering = ERR_PTR(-EINVAL);
 	}
 	/*
 	 * do not remove from the list until nobody holds it; walking the
@@ -1395,6 +1398,32 @@ static void start_unregistering(struct ctl_table_header *p)
 	list_del_init(&p->ctl_entry);
 }
 
+void sysctl_head_get(struct ctl_table_header *head)
+{
+	spin_lock(&sysctl_lock);
+	head->count++;
+	spin_unlock(&sysctl_lock);
+}
+
+void sysctl_head_put(struct ctl_table_header *head)
+{
+	spin_lock(&sysctl_lock);
+	if (!--head->count)
+		kfree(head);
+	spin_unlock(&sysctl_lock);
+}
+
+struct ctl_table_header *sysctl_head_grab(struct ctl_table_header *head)
+{
+	if (!head)
+		BUG();
+	spin_lock(&sysctl_lock);
+	if (!use_table(head))
+		head = ERR_PTR(-ENOENT);
+	spin_unlock(&sysctl_lock);
+	return head;
+}
+
 void sysctl_head_finish(struct ctl_table_header *head)
 {
 	if (!head)
@@ -1771,6 +1800,7 @@ struct ctl_table_header *__register_sysctl_paths(
 	header->unregistering = NULL;
 	header->root = root;
 	sysctl_set_parent(NULL, header->ctl_table);
+	header->count = 1;
 #ifdef CONFIG_SYSCTL_SYSCALL_CHECK
 	if (sysctl_check_table(namespaces, header->ctl_table)) {
 		kfree(header);
@@ -1834,8 +1864,9 @@ void unregister_sysctl_table(struct ctl_table_header * header)
 
 	spin_lock(&sysctl_lock);
 	start_unregistering(header);
+	if (!--header->count)
+		kfree(header);
 	spin_unlock(&sysctl_lock);
-	kfree(header);
 }
 
 void setup_sysctl_set(struct ctl_table_set *p,
@@ -1869,6 +1900,10 @@ void setup_sysctl_set(struct ctl_table_set *p,
 {
 }
 
+void sysctl_head_put(struct ctl_table_header *head)
+{
+}
+
 #endif /* CONFIG_SYSCTL */
 
 /*
-- 
cgit v1.2.3


From bd7b1533cd6a68c734062aa69394bec7e2b1718e Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 15 Jul 2008 16:00:59 -0400
Subject: [PATCH] sysctl: make sure that /proc/sys/net/ipv4 appears before
 per-ns ones

Massage ipv4 initialization - make sure that net.ipv4 appears as
non-per-net-namespace before it shows up in per-net-namespace sysctls.
That's the only change outside of sysctl.c needed to get sane ordering
rules and data structures for sysctls (esp. for procfs side of that
mess).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 include/net/ip.h           | 2 ++
 net/ipv4/af_inet.c         | 4 ++++
 net/ipv4/sysctl_net_ipv4.c | 7 +++++++
 3 files changed, 13 insertions(+)

diff --git a/include/net/ip.h b/include/net/ip.h
index b5862b97520..250e6ef025a 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -188,6 +188,8 @@ extern int sysctl_ip_dynaddr;
 
 extern void ipfrag_init(void);
 
+extern void ip_static_sysctl_init(void);
+
 #ifdef CONFIG_INET
 #include <net/dst.h>
 
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index f440a9f5492..354f6b54e49 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1439,6 +1439,10 @@ static int __init inet_init(void)
 
 	(void)sock_register(&inet_family_ops);
 
+#ifdef CONFIG_SYSCTL
+	ip_static_sysctl_init();
+#endif
+
 	/*
 	 *	Add all the base protocols.
 	 */
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 14ef202a225..d63e9388d92 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -882,4 +882,11 @@ static __init int sysctl_ipv4_init(void)
 	return 0;
 }
 
+/* set enough of tree skeleton to get rid of ordering problems */
+void __init ip_static_sysctl_init(void)
+{
+	static ctl_table table[1];
+	register_sysctl_paths(net_ipv4_ctl_path, table);
+}
+
 __initcall(sysctl_ipv4_init);
-- 
cgit v1.2.3


From ae7edecc9b8810770a8e5cb9a466ea4bdcfa8401 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 15 Jul 2008 06:33:31 -0400
Subject: [PATCH] sysctl: keep track of tree relationships

In a sense, that's the heart of the series.  It's based on the following
property of the trees we are actually asked to add: they can be split into
stem that is already covered by registered trees and crown that is entirely
new.  IOW, if a/b and a/c/d are introduced by our tree, then a/c is also
introduced by it.

That allows to associate tree and table entry with each node in the union;
while directory nodes might be covered by many trees, only one will cover
the node by its crown.  And that will allow much saner logics for /proc/sys
in the next patches.  This patch introduces the data structures needed to
keep track of that.

When adding a sysctl table, we find a "parent" one.  Which is to say,
find the deepest node on its stem that already is present in one of the
tables from our table set or its ancestor sets.  That table will be our
parent and that node in it - attachment point.  Add our table to list
anchored in parent, have it refer the parent and contents of attachment
point.  Also remember where its crown lives.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 include/linux/sysctl.h |  3 +++
 kernel/sysctl.c        | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+)

diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 956264d09ba..3f6599aeb0d 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -1083,6 +1083,9 @@ struct ctl_table_header
 	struct ctl_table *ctl_table_arg;
 	struct ctl_table_root *root;
 	struct ctl_table_set *set;
+	struct ctl_table *attached_by;
+	struct ctl_table *attached_to;
+	struct ctl_table_header *parent;
 };
 
 /* struct ctl_path describes where in the hierarchy a table is added */
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 60d9357e717..c9a0af88703 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1680,6 +1680,52 @@ static __init int sysctl_init(void)
 
 core_initcall(sysctl_init);
 
+static int is_branch_in(struct ctl_table *branch, struct ctl_table *table)
+{
+	struct ctl_table *p;
+	const char *s = branch->procname;
+
+	/* branch should have named subdirectory as its first element */
+	if (!s || !branch->child)
+		return 0;
+
+	/* ... and nothing else */
+	if (branch[1].procname || branch[1].ctl_name)
+		return 0;
+
+	/* table should contain subdirectory with the same name */
+	for (p = table; p->procname || p->ctl_name; p++) {
+		if (!p->child)
+			continue;
+		if (p->procname && strcmp(p->procname, s) == 0)
+			return 1;
+	}
+	return 0;
+}
+
+/* see if attaching q to p would be an improvement */
+static void try_attach(struct ctl_table_header *p, struct ctl_table_header *q)
+{
+	struct ctl_table *to = p->ctl_table, *by = q->ctl_table;
+	int is_better = 0;
+	int not_in_parent = !p->attached_by;
+
+	while (is_branch_in(by, to)) {
+		if (by == q->attached_by)
+			is_better = 1;
+		if (to == p->attached_by)
+			not_in_parent = 1;
+		by = by->child;
+		to = to->child;
+	}
+
+	if (is_better && not_in_parent) {
+		q->attached_by = by;
+		q->attached_to = to;
+		q->parent = p;
+	}
+}
+
 /**
  * __register_sysctl_paths - register a sysctl hierarchy
  * @root: List of sysctl headers to register on
@@ -1759,6 +1805,7 @@ struct ctl_table_header *__register_sysctl_paths(
 	struct ctl_table_header *header;
 	struct ctl_table *new, **prevp;
 	unsigned int n, npath;
+	struct ctl_table_set *set;
 
 	/* Count the path components */
 	for (npath = 0; path[npath].ctl_name || path[npath].procname; ++npath)
@@ -1809,6 +1856,18 @@ struct ctl_table_header *__register_sysctl_paths(
 #endif
 	spin_lock(&sysctl_lock);
 	header->set = lookup_header_set(root, namespaces);
+	header->attached_by = header->ctl_table;
+	header->attached_to = root_table;
+	header->parent = &root_table_header;
+	for (set = header->set; set; set = set->parent) {
+		struct ctl_table_header *p;
+		list_for_each_entry(p, &set->list, ctl_entry) {
+			if (p->unregistering)
+				continue;
+			try_attach(p, header);
+		}
+	}
+	header->parent->count++;
 	list_add_tail(&header->ctl_entry, &header->set->list);
 	spin_unlock(&sysctl_lock);
 
@@ -1864,6 +1923,10 @@ void unregister_sysctl_table(struct ctl_table_header * header)
 
 	spin_lock(&sysctl_lock);
 	start_unregistering(header);
+	if (!--header->parent->count) {
+		WARN_ON(1);
+		kfree(header->parent);
+	}
 	if (!--header->count)
 		kfree(header);
 	spin_unlock(&sysctl_lock);
-- 
cgit v1.2.3


From 9043476f726802f4b00c96d0c4f418dde48d1304 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 15 Jul 2008 08:54:06 -0400
Subject: [PATCH] sanitize proc_sysctl

* keep references to ctl_table_head and ctl_table in /proc/sys inodes
* grab the former during operations, use the latter for access to
  entry if that succeeds
* have ->d_compare() check if table should be seen for one who does lookup;
  that allows us to avoid flipping inodes - if we have the same name resolve
  to different things, we'll just keep several dentries and ->d_compare()
  will reject the wrong ones.
* have ->lookup() and ->readdir() scan the table of our inode first, then
  walk all ctl_table_header and scan ->attached_by for those that are
  attached to our directory.
* implement ->getattr().
* get rid of insane amounts of tree-walking
* get rid of the need to know dentry in ->permission() and of the contortions
  induced by that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/proc/inode.c         |   5 +
 fs/proc/proc_sysctl.c   | 427 ++++++++++++++++++++++--------------------------
 include/linux/proc_fs.h |   5 +
 include/linux/sysctl.h  |   1 +
 kernel/sysctl.c         |  15 ++
 5 files changed, 218 insertions(+), 235 deletions(-)

diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index b37f25dc45a..8bb03f056c2 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/smp_lock.h>
+#include <linux/sysctl.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -65,6 +66,8 @@ static void proc_delete_inode(struct inode *inode)
 			module_put(de->owner);
 		de_put(de);
 	}
+	if (PROC_I(inode)->sysctl)
+		sysctl_head_put(PROC_I(inode)->sysctl);
 	clear_inode(inode);
 }
 
@@ -84,6 +87,8 @@ static struct inode *proc_alloc_inode(struct super_block *sb)
 	ei->fd = 0;
 	ei->op.proc_get_link = NULL;
 	ei->pde = NULL;
+	ei->sysctl = NULL;
+	ei->sysctl_entry = NULL;
 	inode = &ei->vfs_inode;
 	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
 	return inode;
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 5acc001d49f..fa1ec2433e4 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -10,149 +10,110 @@
 static struct dentry_operations proc_sys_dentry_operations;
 static const struct file_operations proc_sys_file_operations;
 static const struct inode_operations proc_sys_inode_operations;
+static const struct file_operations proc_sys_dir_file_operations;
+static const struct inode_operations proc_sys_dir_operations;
 
-static void proc_sys_refresh_inode(struct inode *inode, struct ctl_table *table)
-{
-	/* Refresh the cached information bits in the inode */
-	if (table) {
-		inode->i_uid = 0;
-		inode->i_gid = 0;
-		inode->i_mode = table->mode;
-		if (table->proc_handler) {
-			inode->i_mode |= S_IFREG;
-			inode->i_nlink = 1;
-		} else {
-			inode->i_mode |= S_IFDIR;
-			inode->i_nlink = 0;	/* It is too hard to figure out */
-		}
-	}
-}
-
-static struct inode *proc_sys_make_inode(struct inode *dir, struct ctl_table *table)
+static struct inode *proc_sys_make_inode(struct super_block *sb,
+		struct ctl_table_header *head, struct ctl_table *table)
 {
 	struct inode *inode;
-	struct proc_inode *dir_ei, *ei;
-	int depth;
+	struct proc_inode *ei;
 
-	inode = new_inode(dir->i_sb);
+	inode = new_inode(sb);
 	if (!inode)
 		goto out;
 
-	/* A directory is always one deeper than it's parent */
-	dir_ei = PROC_I(dir);
-	depth = dir_ei->fd + 1;
-
+	sysctl_head_get(head);
 	ei = PROC_I(inode);
-	ei->fd = depth;
+	ei->sysctl = head;
+	ei->sysctl_entry = table;
+
 	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
-	inode->i_op = &proc_sys_inode_operations;
-	inode->i_fop = &proc_sys_file_operations;
 	inode->i_flags |= S_PRIVATE; /* tell selinux to ignore this inode */
-	proc_sys_refresh_inode(inode, table);
+	inode->i_mode = table->mode;
+	if (!table->child) {
+		inode->i_mode |= S_IFREG;
+		inode->i_op = &proc_sys_inode_operations;
+		inode->i_fop = &proc_sys_file_operations;
+	} else {
+		inode->i_mode |= S_IFDIR;
+		inode->i_nlink = 0;
+		inode->i_op = &proc_sys_dir_operations;
+		inode->i_fop = &proc_sys_dir_file_operations;
+	}
 out:
 	return inode;
 }
 
-static struct dentry *proc_sys_ancestor(struct dentry *dentry, int depth)
-{
-	for (;;) {
-		struct proc_inode *ei;
-
-		ei = PROC_I(dentry->d_inode);
-		if (ei->fd == depth)
-			break; /* found */
-
-		dentry = dentry->d_parent;
-	}
-	return dentry;
-}
-
-static struct ctl_table *proc_sys_lookup_table_one(struct ctl_table *table,
-							struct qstr *name)
+static struct ctl_table *find_in_table(struct ctl_table *p, struct qstr *name)
 {
 	int len;
-	for ( ; table->ctl_name || table->procname; table++) {
+	for ( ; p->ctl_name || p->procname; p++) {
 
-		if (!table->procname)
+		if (!p->procname)
 			continue;
 
-		len = strlen(table->procname);
+		len = strlen(p->procname);
 		if (len != name->len)
 			continue;
 
-		if (memcmp(table->procname, name->name, len) != 0)
+		if (memcmp(p->procname, name->name, len) != 0)
 			continue;
 
 		/* I have a match */
-		return table;
+		return p;
 	}
 	return NULL;
 }
 
-static struct ctl_table *proc_sys_lookup_table(struct dentry *dentry,
-						struct ctl_table *table)
+struct ctl_table_header *grab_header(struct inode *inode)
 {
-	struct dentry *ancestor;
-	struct proc_inode *ei;
-	int depth, i;
+	if (PROC_I(inode)->sysctl)
+		return sysctl_head_grab(PROC_I(inode)->sysctl);
+	else
+		return sysctl_head_next(NULL);
+}
 
-	ei = PROC_I(dentry->d_inode);
-	depth = ei->fd;
+static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
+					struct nameidata *nd)
+{
+	struct ctl_table_header *head = grab_header(dir);
+	struct ctl_table *table = PROC_I(dir)->sysctl_entry;
+	struct ctl_table_header *h = NULL;
+	struct qstr *name = &dentry->d_name;
+	struct ctl_table *p;
+	struct inode *inode;
+	struct dentry *err = ERR_PTR(-ENOENT);
 
-	if (depth == 0)
-		return table;
+	if (IS_ERR(head))
+		return ERR_CAST(head);
 
-	for (i = 1; table && (i <= depth); i++) {
-		ancestor = proc_sys_ancestor(dentry, i);
-		table = proc_sys_lookup_table_one(table, &ancestor->d_name);
-		if (table)
-			table = table->child;
+	if (table && !table->child) {
+		WARN_ON(1);
+		goto out;
 	}
-	return table;
-
-}
-static struct ctl_table *proc_sys_lookup_entry(struct dentry *dparent,
-						struct qstr *name,
-						struct ctl_table *table)
-{
-	table = proc_sys_lookup_table(dparent, table);
-	if (table)
-		table = proc_sys_lookup_table_one(table, name);
-	return table;
-}
 
-static struct ctl_table *do_proc_sys_lookup(struct dentry *parent,
-						struct qstr *name,
-						struct ctl_table_header **ptr)
-{
-	struct ctl_table_header *head;
-	struct ctl_table *table = NULL;
+	table = table ? table->child : head->ctl_table;
 
-	for (head = sysctl_head_next(NULL); head;
-			head = sysctl_head_next(head)) {
-		table = proc_sys_lookup_entry(parent, name, head->ctl_table);
-		if (table)
-			break;
+	p = find_in_table(table, name);
+	if (!p) {
+		for (h = sysctl_head_next(NULL); h; h = sysctl_head_next(h)) {
+			if (h->attached_to != table)
+				continue;
+			p = find_in_table(h->attached_by, name);
+			if (p)
+				break;
+		}
 	}
-	*ptr = head;
-	return table;
-}
-
-static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
-					struct nameidata *nd)
-{
-	struct ctl_table_header *head;
-	struct inode *inode;
-	struct dentry *err;
-	struct ctl_table *table;
 
-	err = ERR_PTR(-ENOENT);
-	table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
-	if (!table)
+	if (!p)
 		goto out;
 
 	err = ERR_PTR(-ENOMEM);
-	inode = proc_sys_make_inode(dir, table);
+	inode = proc_sys_make_inode(dir->i_sb, h ? h : head, p);
+	if (h)
+		sysctl_head_finish(h);
+
 	if (!inode)
 		goto out;
 
@@ -168,22 +129,14 @@ out:
 static ssize_t proc_sys_call_handler(struct file *filp, void __user *buf,
 		size_t count, loff_t *ppos, int write)
 {
-	struct dentry *dentry = filp->f_dentry;
-	struct ctl_table_header *head;
-	struct ctl_table *table;
+	struct inode *inode = filp->f_path.dentry->d_inode;
+	struct ctl_table_header *head = grab_header(inode);
+	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
 	ssize_t error;
 	size_t res;
 
-	table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
-	/* Has the sysctl entry disappeared on us? */
-	error = -ENOENT;
-	if (!table)
-		goto out;
-
-	/* Has the sysctl entry been replaced by a directory? */
-	error = -EISDIR;
-	if (!table->proc_handler)
-		goto out;
+	if (IS_ERR(head))
+		return PTR_ERR(head);
 
 	/*
 	 * At this point we know that the sysctl was not unregistered
@@ -193,6 +146,11 @@ static ssize_t proc_sys_call_handler(struct file *filp, void __user *buf,
 	if (sysctl_perm(head->root, table, write ? MAY_WRITE : MAY_READ))
 		goto out;
 
+	/* if that can happen at all, it should be -EINVAL, not -EISDIR */
+	error = -EINVAL;
+	if (!table->proc_handler)
+		goto out;
+
 	/* careful: calling conventions are nasty here */
 	res = count;
 	error = table->proc_handler(table, write, filp, buf, &res, ppos);
@@ -218,82 +176,86 @@ static ssize_t proc_sys_write(struct file *filp, const char __user *buf,
 
 
 static int proc_sys_fill_cache(struct file *filp, void *dirent,
-				filldir_t filldir, struct ctl_table *table)
+				filldir_t filldir,
+				struct ctl_table_header *head,
+				struct ctl_table *table)
 {
-	struct ctl_table_header *head;
-	struct ctl_table *child_table = NULL;
 	struct dentry *child, *dir = filp->f_path.dentry;
 	struct inode *inode;
 	struct qstr qname;
 	ino_t ino = 0;
 	unsigned type = DT_UNKNOWN;
-	int ret;
 
 	qname.name = table->procname;
 	qname.len  = strlen(table->procname);
 	qname.hash = full_name_hash(qname.name, qname.len);
 
-	/* Suppress duplicates.
-	 * Only fill a directory entry if it is the value that
-	 * an ordinary lookup of that name returns.  Hide all
-	 * others.
-	 *
-	 * If we ever cache this translation in the dcache
-	 * I should do a dcache lookup first.  But for now
-	 * it is just simpler not to.
-	 */
-	ret = 0;
-	child_table = do_proc_sys_lookup(dir, &qname, &head);
-	sysctl_head_finish(head);
-	if (child_table != table)
-		return 0;
-
 	child = d_lookup(dir, &qname);
 	if (!child) {
-		struct dentry *new;
-		new = d_alloc(dir, &qname);
-		if (new) {
-			inode = proc_sys_make_inode(dir->d_inode, table);
-			if (!inode)
-				child = ERR_PTR(-ENOMEM);
-			else {
-				new->d_op = &proc_sys_dentry_operations;
-				d_add(new, inode);
+		child = d_alloc(dir, &qname);
+		if (child) {
+			inode = proc_sys_make_inode(dir->d_sb, head, table);
+			if (!inode) {
+				dput(child);
+				return -ENOMEM;
+			} else {
+				child->d_op = &proc_sys_dentry_operations;
+				d_add(child, inode);
 			}
-			if (child)
-				dput(new);
-			else
-				child = new;
+		} else {
+			return -ENOMEM;
 		}
 	}
-	if (!child || IS_ERR(child) || !child->d_inode)
-		goto end_instantiate;
 	inode = child->d_inode;
-	if (inode) {
-		ino  = inode->i_ino;
-		type = inode->i_mode >> 12;
-	}
+	ino  = inode->i_ino;
+	type = inode->i_mode >> 12;
 	dput(child);
-end_instantiate:
-	if (!ino)
-		ino= find_inode_number(dir, &qname);
-	if (!ino)
-		ino = 1;
-	return filldir(dirent, qname.name, qname.len, filp->f_pos, ino, type);
+	return !!filldir(dirent, qname.name, qname.len, filp->f_pos, ino, type);
+}
+
+static int scan(struct ctl_table_header *head, ctl_table *table,
+		unsigned long *pos, struct file *file,
+		void *dirent, filldir_t filldir)
+{
+
+	for (; table->ctl_name || table->procname; table++, (*pos)++) {
+		int res;
+
+		/* Can't do anything without a proc name */
+		if (!table->procname)
+			continue;
+
+		if (*pos < file->f_pos)
+			continue;
+
+		res = proc_sys_fill_cache(file, dirent, filldir, head, table);
+		if (res)
+			return res;
+
+		file->f_pos = *pos + 1;
+	}
+	return 0;
 }
 
 static int proc_sys_readdir(struct file *filp, void *dirent, filldir_t filldir)
 {
-	struct dentry *dentry = filp->f_dentry;
+	struct dentry *dentry = filp->f_path.dentry;
 	struct inode *inode = dentry->d_inode;
-	struct ctl_table_header *head = NULL;
-	struct ctl_table *table;
+	struct ctl_table_header *head = grab_header(inode);
+	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
+	struct ctl_table_header *h = NULL;
 	unsigned long pos;
-	int ret;
+	int ret = -EINVAL;
+
+	if (IS_ERR(head))
+		return PTR_ERR(head);
 
-	ret = -ENOTDIR;
-	if (!S_ISDIR(inode->i_mode))
+	if (table && !table->child) {
+		WARN_ON(1);
 		goto out;
+	}
+
+	table = table ? table->child : head->ctl_table;
 
 	ret = 0;
 	/* Avoid a switch here: arm builds fail with missing __cmpdi2 */
@@ -311,30 +273,17 @@ static int proc_sys_readdir(struct file *filp, void *dirent, filldir_t filldir)
 	}
 	pos = 2;
 
-	/* - Find each instance of the directory
-	 * - Read all entries in each instance
-	 * - Before returning an entry to user space lookup the entry
-	 *   by name and if I find a different entry don't return
-	 *   this one because it means it is a buried dup.
-	 * For sysctl this should only happen for directory entries.
-	 */
-	for (head = sysctl_head_next(NULL); head; head = sysctl_head_next(head)) {
-		table = proc_sys_lookup_table(dentry, head->ctl_table);
+	ret = scan(head, table, &pos, filp, dirent, filldir);
+	if (ret)
+		goto out;
 
-		if (!table)
+	for (h = sysctl_head_next(NULL); h; h = sysctl_head_next(h)) {
+		if (h->attached_to != table)
 			continue;
-
-		for (; table->ctl_name || table->procname; table++, pos++) {
-			/* Can't do anything without a proc name */
-			if (!table->procname)
-				continue;
-
-			if (pos < filp->f_pos)
-				continue;
-
-			if (proc_sys_fill_cache(filp, dirent, filldir, table) < 0)
-				goto out;
-			filp->f_pos = pos + 1;
+		ret = scan(h, h->attached_by, &pos, filp, dirent, filldir);
+		if (ret) {
+			sysctl_head_finish(h);
+			break;
 		}
 	}
 	ret = 1;
@@ -349,47 +298,18 @@ static int proc_sys_permission(struct inode *inode, int mask, struct nameidata *
 	 * sysctl entries that are not writeable,
 	 * are _NOT_ writeable, capabilities or not.
 	 */
-	struct ctl_table_header *head;
-	struct ctl_table *table;
-	struct dentry *dentry;
-	int mode;
-	int depth;
+	struct ctl_table_header *head = grab_header(inode);
+	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
 	int error;
 
-	head = NULL;
-	depth = PROC_I(inode)->fd;
-
-	/* First check the cached permissions, in case we don't have
-	 * enough information to lookup the sysctl table entry.
-	 */
-	error = -EACCES;
-	mode = inode->i_mode;
-
-	if (current->euid == 0)
-		mode >>= 6;
-	else if (in_group_p(0))
-		mode >>= 3;
-
-	if ((mode & mask & (MAY_READ|MAY_WRITE|MAY_EXEC)) == mask)
-		error = 0;
-
-	/* If we can't get a sysctl table entry the permission
-	 * checks on the cached mode will have to be enough.
-	 */
-	if (!nd || !depth)
-		goto out;
+	if (IS_ERR(head))
+		return PTR_ERR(head);
 
-	dentry = nd->path.dentry;
-	table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
+	if (!table) /* global root - r-xr-xr-x */
+		error = mask & MAY_WRITE ? -EACCES : 0;
+	else /* Use the permissions on the sysctl table entry */
+		error = sysctl_perm(head->root, table, mask);
 
-	/* If the entry does not exist deny permission */
-	error = -EACCES;
-	if (!table)
-		goto out;
-
-	/* Use the permissions on the sysctl table entry */
-	error = sysctl_perm(head->root, table, mask);
-out:
 	sysctl_head_finish(head);
 	return error;
 }
@@ -409,33 +329,70 @@ static int proc_sys_setattr(struct dentry *dentry, struct iattr *attr)
 	return error;
 }
 
-/* I'm lazy and don't distinguish between files and directories,
- * until access time.
- */
+static int proc_sys_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
+{
+	struct inode *inode = dentry->d_inode;
+	struct ctl_table_header *head = grab_header(inode);
+	struct ctl_table *table = PROC_I(inode)->sysctl_entry;
+
+	if (IS_ERR(head))
+		return PTR_ERR(head);
+
+	generic_fillattr(inode, stat);
+	if (table)
+		stat->mode = (stat->mode & S_IFMT) | table->mode;
+
+	sysctl_head_finish(head);
+	return 0;
+}
+
 static const struct file_operations proc_sys_file_operations = {
 	.read		= proc_sys_read,
 	.write		= proc_sys_write,
+};
+
+static const struct file_operations proc_sys_dir_file_operations = {
 	.readdir	= proc_sys_readdir,
 };
 
 static const struct inode_operations proc_sys_inode_operations = {
+	.permission	= proc_sys_permission,
+	.setattr	= proc_sys_setattr,
+	.getattr	= proc_sys_getattr,
+};
+
+static const struct inode_operations proc_sys_dir_operations = {
 	.lookup		= proc_sys_lookup,
 	.permission	= proc_sys_permission,
 	.setattr	= proc_sys_setattr,
+	.getattr	= proc_sys_getattr,
 };
 
 static int proc_sys_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct ctl_table_header *head;
-	struct ctl_table *table;
-	table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
-	proc_sys_refresh_inode(dentry->d_inode, table);
-	sysctl_head_finish(head);
-	return !!table;
+	return !PROC_I(dentry->d_inode)->sysctl->unregistering;
+}
+
+static int proc_sys_delete(struct dentry *dentry)
+{
+	return !!PROC_I(dentry->d_inode)->sysctl->unregistering;
+}
+
+static int proc_sys_compare(struct dentry *dir, struct qstr *qstr,
+			    struct qstr *name)
+{
+	struct dentry *dentry = container_of(qstr, struct dentry, d_name);
+	if (qstr->len != name->len)
+		return 1;
+	if (memcmp(qstr->name, name->name, name->len))
+		return 1;
+	return !sysctl_is_seen(PROC_I(dentry->d_inode)->sysctl);
 }
 
 static struct dentry_operations proc_sys_dentry_operations = {
 	.d_revalidate	= proc_sys_revalidate,
+	.d_delete	= proc_sys_delete,
+	.d_compare	= proc_sys_compare,
 };
 
 static struct proc_dir_entry *proc_sys_root;
@@ -443,8 +400,8 @@ static struct proc_dir_entry *proc_sys_root;
 int proc_sys_init(void)
 {
 	proc_sys_root = proc_mkdir("sys", NULL);
-	proc_sys_root->proc_iops = &proc_sys_inode_operations;
-	proc_sys_root->proc_fops = &proc_sys_file_operations;
+	proc_sys_root->proc_iops = &proc_sys_dir_operations;
+	proc_sys_root->proc_fops = &proc_sys_dir_file_operations;
 	proc_sys_root->nlink = 0;
 	return 0;
 }
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index f560d1705af..fb61850d1cf 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -282,11 +282,16 @@ union proc_op {
 		struct task_struct *task);
 };
 
+struct ctl_table_header;
+struct ctl_table;
+
 struct proc_inode {
 	struct pid *pid;
 	int fd;
 	union proc_op op;
 	struct proc_dir_entry *pde;
+	struct ctl_table_header *sysctl;
+	struct ctl_table *sysctl_entry;
 	struct inode vfs_inode;
 };
 
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 3f6599aeb0d..d0437f36921 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -961,6 +961,7 @@ struct ctl_table_header;
 
 extern void sysctl_head_get(struct ctl_table_header *);
 extern void sysctl_head_put(struct ctl_table_header *);
+extern int sysctl_is_seen(struct ctl_table_header *);
 extern struct ctl_table_header *sysctl_head_grab(struct ctl_table_header *);
 extern struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev);
 extern struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index c9a0af88703..ff5abcca5dd 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1932,6 +1932,21 @@ void unregister_sysctl_table(struct ctl_table_header * header)
 	spin_unlock(&sysctl_lock);
 }
 
+int sysctl_is_seen(struct ctl_table_header *p)
+{
+	struct ctl_table_set *set = p->set;
+	int res;
+	spin_lock(&sysctl_lock);
+	if (p->unregistering)
+		res = 0;
+	else if (!set->is_seen)
+		res = 1;
+	else
+		res = set->is_seen(set);
+	spin_unlock(&sysctl_lock);
+	return res;
+}
+
 void setup_sysctl_set(struct ctl_table_set *p,
 	struct ctl_table_set *parent,
 	int (*is_seen)(struct ctl_table_set *))
-- 
cgit v1.2.3


From 1bd5191d9f5d1928c4efdf604c4164b04bb88dbe Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Wed, 21 May 2008 19:15:03 +0200
Subject: [patch 05/14] hpfs: dont call permission()

hpfs_unlink() calls permission() prior to truncating the file.  HPFS
doesn't define a .permission method, so replace with explicit call to
generic_permission().

This is equivalent, except that devcgroup_inode_permission() and
security_inode_permission() are not called.

The truncation is just an implementation detail of the unlink, so
these security checks are unnecessary.

I suspect that even calling generic_permission() is unnecessary, since
we shouldn't mind if the file isn't writable.  But I leave that to the
maintainer to decide.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
---
 fs/hpfs/namei.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index d256559b410..d9c59a77544 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -415,7 +415,7 @@ again:
 		d_drop(dentry);
 		spin_lock(&dentry->d_lock);
 		if (atomic_read(&dentry->d_count) > 1 ||
-		    permission(inode, MAY_WRITE, NULL) ||
+		    generic_permission(inode, MAY_WRITE, NULL) ||
 		    !S_ISREG(inode->i_mode) ||
 		    get_write_access(inode)) {
 			spin_unlock(&dentry->d_lock);
-- 
cgit v1.2.3


From e6305c43eda10ebfd2ad9e35d6e172ccc7bb3695 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 15 Jul 2008 21:03:57 -0400
Subject: [PATCH] sanitize ->permission() prototype

* kill nameidata * argument; map the 3 bits in ->flags anybody cares
  about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
  MAY_... found in mask.

The obvious next target in that direction is permission(9)

folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/afs/internal.h              |  4 +---
 fs/afs/security.c              |  2 +-
 fs/bad_inode.c                 |  3 +--
 fs/cifs/cifsfs.c               |  2 +-
 fs/coda/dir.c                  |  4 +++-
 fs/coda/pioctl.c               |  6 ++----
 fs/ecryptfs/inode.c            | 17 ++---------------
 fs/ext2/acl.c                  |  2 +-
 fs/ext2/acl.h                  |  2 +-
 fs/ext3/acl.c                  |  2 +-
 fs/ext3/acl.h                  |  2 +-
 fs/ext4/acl.c                  |  2 +-
 fs/ext4/acl.h                  |  2 +-
 fs/fuse/dir.c                  |  6 +++---
 fs/gfs2/ops_inode.c            | 12 +++---------
 fs/hfs/inode.c                 |  3 +--
 fs/hfsplus/inode.c             |  2 +-
 fs/hostfs/hostfs_kern.c        |  2 +-
 fs/jffs2/acl.c                 |  2 +-
 fs/jffs2/acl.h                 |  2 +-
 fs/jfs/acl.c                   |  2 +-
 fs/jfs/jfs_acl.h               |  2 +-
 fs/namei.c                     | 23 +++++++++++++++++------
 fs/nfs/dir.c                   | 11 +++++------
 fs/ocfs2/file.c                |  2 +-
 fs/ocfs2/file.h                |  3 +--
 fs/proc/base.c                 |  3 +--
 fs/proc/proc_sysctl.c          |  2 +-
 fs/reiserfs/xattr.c            |  2 +-
 fs/smbfs/file.c                |  4 ++--
 fs/xfs/linux-2.6/xfs_iops.c    |  3 +--
 include/linux/coda_linux.h     |  2 +-
 include/linux/fs.h             |  5 ++++-
 include/linux/nfs_fs.h         |  2 +-
 include/linux/reiserfs_xattr.h |  2 +-
 include/linux/shmem_fs.h       |  2 +-
 kernel/sysctl.c                | 10 +++++-----
 mm/shmem_acl.c                 |  2 +-
 38 files changed, 74 insertions(+), 87 deletions(-)

diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 7102824ba84..3cb6920ff30 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -469,8 +469,6 @@ extern bool afs_cm_incoming_call(struct afs_call *);
 extern const struct inode_operations afs_dir_inode_operations;
 extern const struct file_operations afs_dir_file_operations;
 
-extern int afs_permission(struct inode *, int, struct nameidata *);
-
 /*
  * file.c
  */
@@ -605,7 +603,7 @@ extern void afs_clear_permits(struct afs_vnode *);
 extern void afs_cache_permit(struct afs_vnode *, struct key *, long);
 extern void afs_zap_permits(struct rcu_head *);
 extern struct key *afs_request_key(struct afs_cell *);
-extern int afs_permission(struct inode *, int, struct nameidata *);
+extern int afs_permission(struct inode *, int);
 
 /*
  * server.c
diff --git a/fs/afs/security.c b/fs/afs/security.c
index 3bcbeceba1b..3ef50437003 100644
--- a/fs/afs/security.c
+++ b/fs/afs/security.c
@@ -284,7 +284,7 @@ static int afs_check_permit(struct afs_vnode *vnode, struct key *key,
  * - AFS ACLs are attached to directories only, and a file is controlled by its
  *   parent directory's ACL
  */
-int afs_permission(struct inode *inode, int mask, struct nameidata *nd)
+int afs_permission(struct inode *inode, int mask)
 {
 	struct afs_vnode *vnode = AFS_FS_I(inode);
 	afs_access_t uninitialized_var(access);
diff --git a/fs/bad_inode.c b/fs/bad_inode.c
index f1c2ea8342f..5f1538c03b1 100644
--- a/fs/bad_inode.c
+++ b/fs/bad_inode.c
@@ -243,8 +243,7 @@ static int bad_inode_readlink(struct dentry *dentry, char __user *buffer,
 	return -EIO;
 }
 
-static int bad_inode_permission(struct inode *inode, int mask,
-			struct nameidata *nd)
+static int bad_inode_permission(struct inode *inode, int mask)
 {
 	return -EIO;
 }
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index fe5f6809cba..1ec7076f7b2 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -267,7 +267,7 @@ cifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	return 0;
 }
 
-static int cifs_permission(struct inode *inode, int mask, struct nameidata *nd)
+static int cifs_permission(struct inode *inode, int mask)
 {
 	struct cifs_sb_info *cifs_sb;
 
diff --git a/fs/coda/dir.c b/fs/coda/dir.c
index 3d2580e00a3..c5916228243 100644
--- a/fs/coda/dir.c
+++ b/fs/coda/dir.c
@@ -137,9 +137,11 @@ exit:
 }
 
 
-int coda_permission(struct inode *inode, int mask, struct nameidata *nd)
+int coda_permission(struct inode *inode, int mask)
 {
         int error = 0;
+
+	mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
  
 	if (!mask)
 		return 0; 
diff --git a/fs/coda/pioctl.c b/fs/coda/pioctl.c
index c21a1f552a6..c38a98974fb 100644
--- a/fs/coda/pioctl.c
+++ b/fs/coda/pioctl.c
@@ -24,8 +24,7 @@
 #include <linux/coda_psdev.h>
 
 /* pioctl ops */
-static int coda_ioctl_permission(struct inode *inode, int mask,
-				 struct nameidata *nd);
+static int coda_ioctl_permission(struct inode *inode, int mask);
 static int coda_pioctl(struct inode * inode, struct file * filp, 
                        unsigned int cmd, unsigned long user_data);
 
@@ -42,8 +41,7 @@ const struct file_operations coda_ioctl_operations = {
 };
 
 /* the coda pioctl inode ops */
-static int coda_ioctl_permission(struct inode *inode, int mask,
-				 struct nameidata *nd)
+static int coda_ioctl_permission(struct inode *inode, int mask)
 {
         return 0;
 }
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index d755455e3bf..32f4228efcd 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -830,22 +830,9 @@ out:
 }
 
 static int
-ecryptfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+ecryptfs_permission(struct inode *inode, int mask)
 {
-	int rc;
-
-        if (nd) {
-		struct vfsmount *vfsmnt_save = nd->path.mnt;
-		struct dentry *dentry_save = nd->path.dentry;
-
-		nd->path.mnt = ecryptfs_dentry_to_lower_mnt(nd->path.dentry);
-		nd->path.dentry = ecryptfs_dentry_to_lower(nd->path.dentry);
-		rc = permission(ecryptfs_inode_to_lower(inode), mask, nd);
-		nd->path.mnt = vfsmnt_save;
-		nd->path.dentry = dentry_save;
-        } else
-		rc = permission(ecryptfs_inode_to_lower(inode), mask, NULL);
-        return rc;
+	return permission(ecryptfs_inode_to_lower(inode), mask, NULL);
 }
 
 /**
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index e58669e1b87..ae8c4f850b2 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -294,7 +294,7 @@ ext2_check_acl(struct inode *inode, int mask)
 }
 
 int
-ext2_permission(struct inode *inode, int mask, struct nameidata *nd)
+ext2_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, ext2_check_acl);
 }
diff --git a/fs/ext2/acl.h b/fs/ext2/acl.h
index 0bde85bafe3..b42cf578554 100644
--- a/fs/ext2/acl.h
+++ b/fs/ext2/acl.h
@@ -58,7 +58,7 @@ static inline int ext2_acl_count(size_t size)
 #define EXT2_ACL_NOT_CACHED ((void *)-1)
 
 /* acl.c */
-extern int ext2_permission (struct inode *, int, struct nameidata *);
+extern int ext2_permission (struct inode *, int);
 extern int ext2_acl_chmod (struct inode *);
 extern int ext2_init_acl (struct inode *, struct inode *);
 
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index a754d184817..b60bb241880 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -299,7 +299,7 @@ ext3_check_acl(struct inode *inode, int mask)
 }
 
 int
-ext3_permission(struct inode *inode, int mask, struct nameidata *nd)
+ext3_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, ext3_check_acl);
 }
diff --git a/fs/ext3/acl.h b/fs/ext3/acl.h
index 0d1e6279cbf..42da16b8cac 100644
--- a/fs/ext3/acl.h
+++ b/fs/ext3/acl.h
@@ -58,7 +58,7 @@ static inline int ext3_acl_count(size_t size)
 #define EXT3_ACL_NOT_CACHED ((void *)-1)
 
 /* acl.c */
-extern int ext3_permission (struct inode *, int, struct nameidata *);
+extern int ext3_permission (struct inode *, int);
 extern int ext3_acl_chmod (struct inode *);
 extern int ext3_init_acl (handle_t *, struct inode *, struct inode *);
 
diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c
index 3c8dab880d9..c7d04e16544 100644
--- a/fs/ext4/acl.c
+++ b/fs/ext4/acl.c
@@ -299,7 +299,7 @@ ext4_check_acl(struct inode *inode, int mask)
 }
 
 int
-ext4_permission(struct inode *inode, int mask, struct nameidata *nd)
+ext4_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, ext4_check_acl);
 }
diff --git a/fs/ext4/acl.h b/fs/ext4/acl.h
index 26a5c1abf14..cd2b855a07d 100644
--- a/fs/ext4/acl.h
+++ b/fs/ext4/acl.h
@@ -58,7 +58,7 @@ static inline int ext4_acl_count(size_t size)
 #define EXT4_ACL_NOT_CACHED ((void *)-1)
 
 /* acl.c */
-extern int ext4_permission (struct inode *, int, struct nameidata *);
+extern int ext4_permission (struct inode *, int);
 extern int ext4_acl_chmod (struct inode *);
 extern int ext4_init_acl (handle_t *, struct inode *, struct inode *);
 
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 51d0035ff07..48a7934cb95 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -898,7 +898,7 @@ static int fuse_access(struct inode *inode, int mask)
 		return PTR_ERR(req);
 
 	memset(&inarg, 0, sizeof(inarg));
-	inarg.mask = mask;
+	inarg.mask = mask & (MAY_READ | MAY_WRITE | MAY_EXEC);
 	req->in.h.opcode = FUSE_ACCESS;
 	req->in.h.nodeid = get_node_id(inode);
 	req->in.numargs = 1;
@@ -927,7 +927,7 @@ static int fuse_access(struct inode *inode, int mask)
  * access request is sent.  Execute permission is still checked
  * locally based on file mode.
  */
-static int fuse_permission(struct inode *inode, int mask, struct nameidata *nd)
+static int fuse_permission(struct inode *inode, int mask)
 {
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	bool refreshed = false;
@@ -962,7 +962,7 @@ static int fuse_permission(struct inode *inode, int mask, struct nameidata *nd)
 		   exist.  So if permissions are revoked this won't be
 		   noticed immediately, only after the attribute
 		   timeout has expired */
-	} else if (nd && (nd->flags & (LOOKUP_ACCESS | LOOKUP_CHDIR))) {
+	} else if (mask & (MAY_ACCESS | MAY_CHDIR)) {
 		err = fuse_access(inode, mask);
 	} else if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		if (!(inode->i_mode & S_IXUGO)) {
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 1e252dfc529..4e982532f08 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -915,12 +915,6 @@ int gfs2_permission(struct inode *inode, int mask)
 	return error;
 }
 
-static int gfs2_iop_permission(struct inode *inode, int mask,
-			       struct nameidata *nd)
-{
-	return gfs2_permission(inode, mask);
-}
-
 static int setattr_size(struct inode *inode, struct iattr *attr)
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
@@ -1150,7 +1144,7 @@ static int gfs2_removexattr(struct dentry *dentry, const char *name)
 }
 
 const struct inode_operations gfs2_file_iops = {
-	.permission = gfs2_iop_permission,
+	.permission = gfs2_permission,
 	.setattr = gfs2_setattr,
 	.getattr = gfs2_getattr,
 	.setxattr = gfs2_setxattr,
@@ -1169,7 +1163,7 @@ const struct inode_operations gfs2_dir_iops = {
 	.rmdir = gfs2_rmdir,
 	.mknod = gfs2_mknod,
 	.rename = gfs2_rename,
-	.permission = gfs2_iop_permission,
+	.permission = gfs2_permission,
 	.setattr = gfs2_setattr,
 	.getattr = gfs2_getattr,
 	.setxattr = gfs2_setxattr,
@@ -1181,7 +1175,7 @@ const struct inode_operations gfs2_dir_iops = {
 const struct inode_operations gfs2_symlink_iops = {
 	.readlink = gfs2_readlink,
 	.follow_link = gfs2_follow_link,
-	.permission = gfs2_iop_permission,
+	.permission = gfs2_permission,
 	.setattr = gfs2_setattr,
 	.getattr = gfs2_getattr,
 	.setxattr = gfs2_setxattr,
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index dc4ec640e87..aa73f3fd5dd 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -511,8 +511,7 @@ void hfs_clear_inode(struct inode *inode)
 	}
 }
 
-static int hfs_permission(struct inode *inode, int mask,
-			  struct nameidata *nd)
+static int hfs_permission(struct inode *inode, int mask)
 {
 	if (S_ISREG(inode->i_mode) && mask & MAY_EXEC)
 		return 0;
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index cc3b5e24339..d4014e3044d 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -238,7 +238,7 @@ static void hfsplus_set_perms(struct inode *inode, struct hfsplus_perm *perms)
 	perms->dev = cpu_to_be32(HFSPLUS_I(inode).dev);
 }
 
-static int hfsplus_permission(struct inode *inode, int mask, struct nameidata *nd)
+static int hfsplus_permission(struct inode *inode, int mask)
 {
 	/* MAY_EXEC is also used for lookup, if no x bit is set allow lookup,
 	 * open_exec has the same test, so it's still not executable, if a x bit
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 5222345ddcc..d6ecabf4d23 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -822,7 +822,7 @@ int hostfs_rename(struct inode *from_ino, struct dentry *from,
 	return err;
 }
 
-int hostfs_permission(struct inode *ino, int desired, struct nameidata *nd)
+int hostfs_permission(struct inode *ino, int desired)
 {
 	char *name;
 	int r = 0, w = 0, x = 0, err;
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index 4c80404a9ab..d98713777a1 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -314,7 +314,7 @@ static int jffs2_check_acl(struct inode *inode, int mask)
 	return -EAGAIN;
 }
 
-int jffs2_permission(struct inode *inode, int mask, struct nameidata *nd)
+int jffs2_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, jffs2_check_acl);
 }
diff --git a/fs/jffs2/acl.h b/fs/jffs2/acl.h
index 0bb7f003fd8..8ca058aed38 100644
--- a/fs/jffs2/acl.h
+++ b/fs/jffs2/acl.h
@@ -28,7 +28,7 @@ struct jffs2_acl_header {
 
 #define JFFS2_ACL_NOT_CACHED ((void *)-1)
 
-extern int jffs2_permission(struct inode *, int, struct nameidata *);
+extern int jffs2_permission(struct inode *, int);
 extern int jffs2_acl_chmod(struct inode *);
 extern int jffs2_init_acl_pre(struct inode *, struct inode *, int *);
 extern int jffs2_init_acl_post(struct inode *);
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index 4d84bdc8829..d3e5c33665d 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -140,7 +140,7 @@ static int jfs_check_acl(struct inode *inode, int mask)
 	return -EAGAIN;
 }
 
-int jfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+int jfs_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, jfs_check_acl);
 }
diff --git a/fs/jfs/jfs_acl.h b/fs/jfs/jfs_acl.h
index 455fa429204..88475f10a38 100644
--- a/fs/jfs/jfs_acl.h
+++ b/fs/jfs/jfs_acl.h
@@ -20,7 +20,7 @@
 
 #ifdef CONFIG_JFS_POSIX_ACL
 
-int jfs_permission(struct inode *, int, struct nameidata *);
+int jfs_permission(struct inode *, int);
 int jfs_init_acl(tid_t, struct inode *, struct inode *);
 int jfs_setattr(struct dentry *, struct iattr *);
 
diff --git a/fs/namei.c b/fs/namei.c
index 3b26a240ade..46af98ed136 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -185,6 +185,8 @@ int generic_permission(struct inode *inode, int mask,
 {
 	umode_t			mode = inode->i_mode;
 
+	mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
+
 	if (current->fsuid == inode->i_uid)
 		mode >>= 6;
 	else {
@@ -203,7 +205,7 @@ int generic_permission(struct inode *inode, int mask,
 	/*
 	 * If the DACs are ok we don't need any capability check.
 	 */
-	if (((mode & mask & (MAY_READ|MAY_WRITE|MAY_EXEC)) == mask))
+	if ((mask & ~mode) == 0)
 		return 0;
 
  check_capabilities:
@@ -228,7 +230,7 @@ int generic_permission(struct inode *inode, int mask,
 
 int permission(struct inode *inode, int mask, struct nameidata *nd)
 {
-	int retval, submask;
+	int retval;
 	struct vfsmount *mnt = NULL;
 
 	if (nd)
@@ -261,9 +263,17 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 	}
 
 	/* Ordinary permission routines do not understand MAY_APPEND. */
-	submask = mask & ~MAY_APPEND;
 	if (inode->i_op && inode->i_op->permission) {
-		retval = inode->i_op->permission(inode, submask, nd);
+		int extra = 0;
+		if (nd) {
+			if (nd->flags & LOOKUP_ACCESS)
+				extra |= MAY_ACCESS;
+			if (nd->flags & LOOKUP_CHDIR)
+				extra |= MAY_CHDIR;
+			if (nd->flags & LOOKUP_OPEN)
+				extra |= MAY_OPEN;
+		}
+		retval = inode->i_op->permission(inode, mask | extra);
 		if (!retval) {
 			/*
 			 * Exec permission on a regular file is denied if none
@@ -277,7 +287,7 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 				return -EACCES;
 		}
 	} else {
-		retval = generic_permission(inode, submask, NULL);
+		retval = generic_permission(inode, mask, NULL);
 	}
 	if (retval)
 		return retval;
@@ -286,7 +296,8 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 	if (retval)
 		return retval;
 
-	return security_inode_permission(inode, mask, nd);
+	return security_inode_permission(inode,
+			mask & (MAY_READ|MAY_WRITE|MAY_EXEC), nd);
 }
 
 /**
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 28a238dab23..74f92b717f7 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1884,7 +1884,7 @@ static int nfs_do_access(struct inode *inode, struct rpc_cred *cred, int mask)
 		return status;
 	nfs_access_add_cache(inode, &cache);
 out:
-	if ((cache.mask & mask) == mask)
+	if ((mask & ~cache.mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
 		return 0;
 	return -EACCES;
 }
@@ -1907,17 +1907,17 @@ int nfs_may_open(struct inode *inode, struct rpc_cred *cred, int openflags)
 	return nfs_do_access(inode, cred, nfs_open_permission_mask(openflags));
 }
 
-int nfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+int nfs_permission(struct inode *inode, int mask)
 {
 	struct rpc_cred *cred;
 	int res = 0;
 
 	nfs_inc_stats(inode, NFSIOS_VFSACCESS);
 
-	if (mask == 0)
+	if ((mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
 		goto out;
 	/* Is this sys_access() ? */
-	if (nd != NULL && (nd->flags & LOOKUP_ACCESS))
+	if (mask & MAY_ACCESS)
 		goto force_lookup;
 
 	switch (inode->i_mode & S_IFMT) {
@@ -1926,8 +1926,7 @@ int nfs_permission(struct inode *inode, int mask, struct nameidata *nd)
 		case S_IFREG:
 			/* NFSv4 has atomic_open... */
 			if (nfs_server_capable(inode, NFS_CAP_ATOMIC_OPEN)
-					&& nd != NULL
-					&& (nd->flags & LOOKUP_OPEN))
+					&& (mask & MAY_OPEN))
 				goto out;
 			break;
 		case S_IFDIR:
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index e8514e8b6ce..be2dd95d3a1 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1176,7 +1176,7 @@ bail:
 	return err;
 }
 
-int ocfs2_permission(struct inode *inode, int mask, struct nameidata *nd)
+int ocfs2_permission(struct inode *inode, int mask)
 {
 	int ret;
 
diff --git a/fs/ocfs2/file.h b/fs/ocfs2/file.h
index 048ddcaf5c8..1e27b4d017e 100644
--- a/fs/ocfs2/file.h
+++ b/fs/ocfs2/file.h
@@ -62,8 +62,7 @@ int ocfs2_lock_allocators(struct inode *inode, struct ocfs2_dinode *di,
 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr);
 int ocfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		  struct kstat *stat);
-int ocfs2_permission(struct inode *inode, int mask,
-		     struct nameidata *nd);
+int ocfs2_permission(struct inode *inode, int mask);
 
 int ocfs2_should_update_atime(struct inode *inode,
 			      struct vfsmount *vfsmnt);
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 81bce6791bf..d82d800389f 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1859,8 +1859,7 @@ static const struct file_operations proc_fd_operations = {
  * /proc/pid/fd needs a special permission handler so that a process can still
  * access /proc/self/fd after it has executed a setuid().
  */
-static int proc_fd_permission(struct inode *inode, int mask,
-				struct nameidata *nd)
+static int proc_fd_permission(struct inode *inode, int mask)
 {
 	int rv;
 
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index fa1ec2433e4..f9a8b892718 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -292,7 +292,7 @@ out:
 	return ret;
 }
 
-static int proc_sys_permission(struct inode *inode, int mask, struct nameidata *nd)
+static int proc_sys_permission(struct inode *inode, int mask)
 {
 	/*
 	 * sysctl entries that are not writeable,
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index d7c4935c103..bb3cb5b7cdb 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -1250,7 +1250,7 @@ static int reiserfs_check_acl(struct inode *inode, int mask)
 	return error;
 }
 
-int reiserfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+int reiserfs_permission(struct inode *inode, int mask)
 {
 	/*
 	 * We don't do permission checks on the internal objects.
diff --git a/fs/smbfs/file.c b/fs/smbfs/file.c
index 2294783320c..e4f8d51a555 100644
--- a/fs/smbfs/file.c
+++ b/fs/smbfs/file.c
@@ -408,7 +408,7 @@ smb_file_release(struct inode *inode, struct file * file)
  * privileges, so we need our own check for this.
  */
 static int
-smb_file_permission(struct inode *inode, int mask, struct nameidata *nd)
+smb_file_permission(struct inode *inode, int mask)
 {
 	int mode = inode->i_mode;
 	int error = 0;
@@ -417,7 +417,7 @@ smb_file_permission(struct inode *inode, int mask, struct nameidata *nd)
 
 	/* Look at user permissions */
 	mode >>= 6;
-	if ((mode & 7 & mask) != mask)
+	if (mask & ~mode & (MAY_READ | MAY_WRITE | MAY_EXEC))
 		error = -EACCES;
 	return error;
 }
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 2bf287ef548..5fc61c824bb 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -589,8 +589,7 @@ xfs_check_acl(
 STATIC int
 xfs_vn_permission(
 	struct inode		*inode,
-	int			mask,
-	struct nameidata	*nd)
+	int			mask)
 {
 	return generic_permission(inode, mask, xfs_check_acl);
 }
diff --git a/include/linux/coda_linux.h b/include/linux/coda_linux.h
index 31b75311e2c..dcc228aa335 100644
--- a/include/linux/coda_linux.h
+++ b/include/linux/coda_linux.h
@@ -37,7 +37,7 @@ extern const struct file_operations coda_ioctl_operations;
 /* operations shared over more than one file */
 int coda_open(struct inode *i, struct file *f);
 int coda_release(struct inode *i, struct file *f);
-int coda_permission(struct inode *inode, int mask, struct nameidata *nd);
+int coda_permission(struct inode *inode, int mask);
 int coda_revalidate_inode(struct dentry *);
 int coda_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 int coda_setattr(struct dentry *, struct iattr *);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7721a2ac9c0..6c923c9b79b 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -60,6 +60,9 @@ extern int dir_notify_enable;
 #define MAY_WRITE 2
 #define MAY_READ 4
 #define MAY_APPEND 8
+#define MAY_ACCESS 16
+#define MAY_CHDIR 32
+#define MAY_OPEN 64
 
 #define FMODE_READ 1
 #define FMODE_WRITE 2
@@ -1272,7 +1275,7 @@ struct inode_operations {
 	void * (*follow_link) (struct dentry *, struct nameidata *);
 	void (*put_link) (struct dentry *, struct nameidata *, void *);
 	void (*truncate) (struct inode *);
-	int (*permission) (struct inode *, int, struct nameidata *);
+	int (*permission) (struct inode *, int);
 	int (*setattr) (struct dentry *, struct iattr *);
 	int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
 	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 29d26191873..f08f9ca602a 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -332,7 +332,7 @@ extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *);
 extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr);
 extern int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fattr);
 extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
-extern int nfs_permission(struct inode *, int, struct nameidata *);
+extern int nfs_permission(struct inode *, int);
 extern int nfs_open(struct inode *, struct file *);
 extern int nfs_release(struct inode *, struct file *);
 extern int nfs_attribute_timeout(struct inode *inode);
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index 66a96814d61..af135ae895d 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -55,7 +55,7 @@ int reiserfs_removexattr(struct dentry *dentry, const char *name);
 int reiserfs_delete_xattrs(struct inode *inode);
 int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
 int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
-int reiserfs_permission(struct inode *inode, int mask, struct nameidata *nd);
+int reiserfs_permission(struct inode *inode, int mask);
 
 int reiserfs_xattr_del(struct inode *, const char *);
 int reiserfs_xattr_get(const struct inode *, const char *, void *, size_t);
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index f2d12d5a21b..fd83f2584b1 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -43,7 +43,7 @@ static inline struct shmem_inode_info *SHMEM_I(struct inode *inode)
 }
 
 #ifdef CONFIG_TMPFS_POSIX_ACL
-int shmem_permission(struct inode *, int, struct nameidata *);
+int shmem_permission(struct inode *, int);
 int shmem_acl_init(struct inode *, struct inode *);
 void shmem_acl_destroy_inode(struct inode *);
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index ff5abcca5dd..911d846f050 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1516,9 +1516,9 @@ static int do_sysctl_strategy(struct ctl_table_root *root,
 	int op = 0, rc;
 
 	if (oldval)
-		op |= 004;
+		op |= MAY_READ;
 	if (newval)
-		op |= 002;
+		op |= MAY_WRITE;
 	if (sysctl_perm(root, table, op))
 		return -EPERM;
 
@@ -1560,7 +1560,7 @@ repeat:
 		if (n == table->ctl_name) {
 			int error;
 			if (table->child) {
-				if (sysctl_perm(root, table, 001))
+				if (sysctl_perm(root, table, MAY_EXEC))
 					return -EPERM;
 				name++;
 				nlen--;
@@ -1635,7 +1635,7 @@ static int test_perm(int mode, int op)
 		mode >>= 6;
 	else if (in_egroup_p(0))
 		mode >>= 3;
-	if ((mode & op & 0007) == op)
+	if ((op & ~mode & (MAY_READ|MAY_WRITE|MAY_EXEC)) == 0)
 		return 0;
 	return -EACCES;
 }
@@ -1645,7 +1645,7 @@ int sysctl_perm(struct ctl_table_root *root, struct ctl_table *table, int op)
 	int error;
 	int mode;
 
-	error = security_sysctl(table, op);
+	error = security_sysctl(table, op & (MAY_READ | MAY_WRITE | MAY_EXEC));
 	if (error)
 		return error;
 
diff --git a/mm/shmem_acl.c b/mm/shmem_acl.c
index f5664c5b9eb..8e5aadd7dcd 100644
--- a/mm/shmem_acl.c
+++ b/mm/shmem_acl.c
@@ -191,7 +191,7 @@ shmem_check_acl(struct inode *inode, int mask)
  * shmem_permission  -  permission() inode operation
  */
 int
-shmem_permission(struct inode *inode, int mask, struct nameidata *nd)
+shmem_permission(struct inode *inode, int mask)
 {
 	return generic_permission(inode, mask, shmem_check_acl);
 }
-- 
cgit v1.2.3


From c82e42da8a6b2f3a85dc4d4278cb8238702f8f64 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 24 Jun 2008 16:50:12 +0200
Subject: [patch 1/5] vfs: truncate: dont check immutable twice

vfs_permission(MAY_WRITE) already checked for the inode being
immutable, so no need to repeat it.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Christoph Hellwig <hch@infradead.org>
---
 fs/open.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/open.c b/fs/open.c
index bb98d2fe809..b2e4c93aed0 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -256,7 +256,7 @@ static long do_sys_truncate(const char __user * path, loff_t length)
 		goto mnt_drop_write_and_out;
 
 	error = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+	if (IS_APPEND(inode))
 		goto mnt_drop_write_and_out;
 
 	error = get_write_access(inode);
-- 
cgit v1.2.3


From 2f1936b87783a3a56c9441b27b9ba7a747f11e8e Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 24 Jun 2008 16:50:14 +0200
Subject: [patch 3/5] vfs: change remove_suid() to file_remove_suid()

All calls to remove_suid() are made with a file pointer, because
(similarly to file_update_time) it is called when the file is written.

Clean up callers by passing in a file instead of a dentry.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
---
 fs/fuse/file.c             | 2 +-
 fs/ntfs/file.c             | 2 +-
 fs/splice.c                | 4 ++--
 fs/xfs/linux-2.6/xfs_lrw.c | 2 +-
 include/linux/fs.h         | 2 +-
 mm/filemap.c               | 7 ++++---
 mm/filemap_xip.c           | 2 +-
 7 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 67ff2c6a8f6..2bada6bbc31 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -893,7 +893,7 @@ static ssize_t fuse_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
 	if (count == 0)
 		goto out;
 
-	err = remove_suid(file->f_path.dentry);
+	err = file_remove_suid(file);
 	if (err)
 		goto out;
 
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index 3c5550cd11d..d020866d423 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -2118,7 +2118,7 @@ static ssize_t ntfs_file_aio_write_nolock(struct kiocb *iocb,
 		goto out;
 	if (!count)
 		goto out;
-	err = remove_suid(file->f_path.dentry);
+	err = file_remove_suid(file);
 	if (err)
 		goto out;
 	file_update_time(file);
diff --git a/fs/splice.c b/fs/splice.c
index 47dc1a445d1..b30311ba8af 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -772,7 +772,7 @@ generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out,
 	ssize_t ret;
 	int err;
 
-	err = remove_suid(out->f_path.dentry);
+	err = file_remove_suid(out);
 	if (unlikely(err))
 		return err;
 
@@ -830,7 +830,7 @@ generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 	ssize_t ret;
 
 	inode_double_lock(inode, pipe->inode);
-	ret = remove_suid(out->f_path.dentry);
+	ret = file_remove_suid(out);
 	if (likely(!ret))
 		ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
 	inode_double_unlock(inode, pipe->inode);
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 5e3b57516ec..82333b3e118 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -711,7 +711,7 @@ start:
 	     !capable(CAP_FSETID)) {
 		error = xfs_write_clear_setuid(xip);
 		if (likely(!error))
-			error = -remove_suid(file->f_path.dentry);
+			error = -file_remove_suid(file);
 		if (unlikely(error)) {
 			goto out_unlock_internal;
 		}
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 6c923c9b79b..1a3546e69f9 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1834,7 +1834,7 @@ extern void clear_inode(struct inode *);
 extern void destroy_inode(struct inode *);
 extern struct inode *new_inode(struct super_block *);
 extern int should_remove_suid(struct dentry *);
-extern int remove_suid(struct dentry *);
+extern int file_remove_suid(struct file *);
 
 extern void __insert_inode_hash(struct inode *, unsigned long hashval);
 extern void remove_inode_hash(struct inode *);
diff --git a/mm/filemap.c b/mm/filemap.c
index 2ed8b0389c5..5de7633e1db 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1758,8 +1758,9 @@ static int __remove_suid(struct dentry *dentry, int kill)
 	return notify_change(dentry, &newattrs);
 }
 
-int remove_suid(struct dentry *dentry)
+int file_remove_suid(struct file *file)
 {
+	struct dentry *dentry = file->f_path.dentry;
 	int killsuid = should_remove_suid(dentry);
 	int killpriv = security_inode_need_killpriv(dentry);
 	int error = 0;
@@ -1773,7 +1774,7 @@ int remove_suid(struct dentry *dentry)
 
 	return error;
 }
-EXPORT_SYMBOL(remove_suid);
+EXPORT_SYMBOL(file_remove_suid);
 
 static size_t __iovec_copy_from_user_inatomic(char *vaddr,
 			const struct iovec *iov, size_t base, size_t bytes)
@@ -2529,7 +2530,7 @@ __generic_file_aio_write_nolock(struct kiocb *iocb, const struct iovec *iov,
 	if (count == 0)
 		goto out;
 
-	err = remove_suid(file->f_path.dentry);
+	err = file_remove_suid(file);
 	if (err)
 		goto out;
 
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 3e744abcce9..98a3f31ccd6 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -380,7 +380,7 @@ xip_file_write(struct file *filp, const char __user *buf, size_t len,
 	if (count == 0)
 		goto out_backing;
 
-	ret = remove_suid(filp->f_path.dentry);
+	ret = file_remove_suid(filp);
 	if (ret)
 		goto out_backing;
 
-- 
cgit v1.2.3


From 7e79eedb3b22200cc8b774baea3a7bf28d766101 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Date: Tue, 24 Jun 2008 16:50:15 +0200
Subject: [patch 4/5] vfs: reuse local variable in vfs_link()

Why not reuse "inode" which is assigned as

  struct inode *inode = old_dentry->d_inode;

in the beginning of vfs_link() ?

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
---
 fs/namei.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index 46af98ed136..3b67be7631d 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2524,19 +2524,19 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de
 		return -EPERM;
 	if (!dir->i_op || !dir->i_op->link)
 		return -EPERM;
-	if (S_ISDIR(old_dentry->d_inode->i_mode))
+	if (S_ISDIR(inode->i_mode))
 		return -EPERM;
 
 	error = security_inode_link(old_dentry, dir, new_dentry);
 	if (error)
 		return error;
 
-	mutex_lock(&old_dentry->d_inode->i_mutex);
+	mutex_lock(&inode->i_mutex);
 	DQUOT_INIT(dir);
 	error = dir->i_op->link(old_dentry, dir, new_dentry);
-	mutex_unlock(&old_dentry->d_inode->i_mutex);
+	mutex_unlock(&inode->i_mutex);
 	if (!error)
-		fsnotify_link(dir, old_dentry->d_inode, new_dentry);
+		fsnotify_link(dir, inode, new_dentry);
 	return error;
 }
 
-- 
cgit v1.2.3


From db2e747b14991a4c6a5c98b0e5f552a193237c03 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 24 Jun 2008 16:50:16 +0200
Subject: [patch 5/5] vfs: remove mode parameter from vfs_symlink()

Remove the unused mode parameter from vfs_symlink and callers.

Thanks to Tetsuo Handa for noticing.

CC: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
---
 fs/ecryptfs/inode.c |  4 +---
 fs/namei.c          |  4 ++--
 fs/nfsd/vfs.c       | 10 ++--------
 include/linux/fs.h  |  2 +-
 4 files changed, 6 insertions(+), 14 deletions(-)

diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 32f4228efcd..f25caf2b088 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -465,7 +465,6 @@ static int ecryptfs_symlink(struct inode *dir, struct dentry *dentry,
 	int rc;
 	struct dentry *lower_dentry;
 	struct dentry *lower_dir_dentry;
-	umode_t mode;
 	char *encoded_symname;
 	int encoded_symlen;
 	struct ecryptfs_crypt_stat *crypt_stat = NULL;
@@ -473,7 +472,6 @@ static int ecryptfs_symlink(struct inode *dir, struct dentry *dentry,
 	lower_dentry = ecryptfs_dentry_to_lower(dentry);
 	dget(lower_dentry);
 	lower_dir_dentry = lock_parent(lower_dentry);
-	mode = S_IALLUGO;
 	encoded_symlen = ecryptfs_encode_filename(crypt_stat, symname,
 						  strlen(symname),
 						  &encoded_symname);
@@ -482,7 +480,7 @@ static int ecryptfs_symlink(struct inode *dir, struct dentry *dentry,
 		goto out_lock;
 	}
 	rc = vfs_symlink(lower_dir_dentry->d_inode, lower_dentry,
-			 encoded_symname, mode);
+			 encoded_symname);
 	kfree(encoded_symname);
 	if (rc || !lower_dentry->d_inode)
 		goto out_lock;
diff --git a/fs/namei.c b/fs/namei.c
index 3b67be7631d..ae0e56fdb74 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2434,7 +2434,7 @@ asmlinkage long sys_unlink(const char __user *pathname)
 	return do_unlinkat(AT_FDCWD, pathname);
 }
 
-int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname, int mode)
+int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname)
 {
 	int error = may_create(dir, dentry, NULL);
 
@@ -2483,7 +2483,7 @@ asmlinkage long sys_symlinkat(const char __user *oldname,
 	error = mnt_want_write(nd.path.mnt);
 	if (error)
 		goto out_dput;
-	error = vfs_symlink(nd.path.dentry->d_inode, dentry, from, S_IALLUGO);
+	error = vfs_symlink(nd.path.dentry->d_inode, dentry, from);
 	mnt_drop_write(nd.path.mnt);
 out_dput:
 	dput(dentry);
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 0f4481e0502..ad1ad59e374 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1516,7 +1516,6 @@ nfsd_symlink(struct svc_rqst *rqstp, struct svc_fh *fhp,
 	struct dentry	*dentry, *dnew;
 	__be32		err, cerr;
 	int		host_err;
-	umode_t		mode;
 
 	err = nfserr_noent;
 	if (!flen || !plen)
@@ -1535,11 +1534,6 @@ nfsd_symlink(struct svc_rqst *rqstp, struct svc_fh *fhp,
 	if (IS_ERR(dnew))
 		goto out_nfserr;
 
-	mode = S_IALLUGO;
-	/* Only the MODE ATTRibute is even vaguely meaningful */
-	if (iap && (iap->ia_valid & ATTR_MODE))
-		mode = iap->ia_mode & S_IALLUGO;
-
 	host_err = mnt_want_write(fhp->fh_export->ex_path.mnt);
 	if (host_err)
 		goto out_nfserr;
@@ -1551,11 +1545,11 @@ nfsd_symlink(struct svc_rqst *rqstp, struct svc_fh *fhp,
 		else {
 			strncpy(path_alloced, path, plen);
 			path_alloced[plen] = 0;
-			host_err = vfs_symlink(dentry->d_inode, dnew, path_alloced, mode);
+			host_err = vfs_symlink(dentry->d_inode, dnew, path_alloced);
 			kfree(path_alloced);
 		}
 	} else
-		host_err = vfs_symlink(dentry->d_inode, dnew, path, mode);
+		host_err = vfs_symlink(dentry->d_inode, dnew, path);
 
 	if (!host_err) {
 		if (EX_ISSYNC(fhp->fh_export))
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 1a3546e69f9..25998e803fc 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1139,7 +1139,7 @@ extern int vfs_permission(struct nameidata *, int);
 extern int vfs_create(struct inode *, struct dentry *, int, struct nameidata *);
 extern int vfs_mkdir(struct inode *, struct dentry *, int);
 extern int vfs_mknod(struct inode *, struct dentry *, int, dev_t);
-extern int vfs_symlink(struct inode *, struct dentry *, const char *, int);
+extern int vfs_symlink(struct inode *, struct dentry *, const char *);
 extern int vfs_link(struct dentry *, struct inode *, struct dentry *);
 extern int vfs_rmdir(struct inode *, struct dentry *);
 extern int vfs_unlink(struct inode *, struct dentry *);
-- 
cgit v1.2.3


From 8bb79224b87aab92071e94d46e70bd160d89bf34 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 16 Jul 2008 09:51:03 -0400
Subject: [PATCH] permission checks for chdir need special treatment only on
 the last step

... so we ought to pass MAY_CHDIR to vfs_permission() instead of having
it triggered on every step of preceding pathname resolution.  LOOKUP_CHDIR
is killed by that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/namei.c            | 2 --
 fs/open.c             | 5 ++---
 include/linux/namei.h | 1 -
 3 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index ae0e56fdb74..6c76e1ee9c4 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -268,8 +268,6 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 		if (nd) {
 			if (nd->flags & LOOKUP_ACCESS)
 				extra |= MAY_ACCESS;
-			if (nd->flags & LOOKUP_CHDIR)
-				extra |= MAY_CHDIR;
 			if (nd->flags & LOOKUP_OPEN)
 				extra |= MAY_OPEN;
 		}
diff --git a/fs/open.c b/fs/open.c
index b2e4c93aed0..8e02d42bfe4 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -501,12 +501,11 @@ asmlinkage long sys_chdir(const char __user * filename)
 	struct nameidata nd;
 	int error;
 
-	error = __user_walk(filename,
-			    LOOKUP_FOLLOW|LOOKUP_DIRECTORY|LOOKUP_CHDIR, &nd);
+	error = __user_walk(filename, LOOKUP_FOLLOW|LOOKUP_DIRECTORY, &nd);
 	if (error)
 		goto out;
 
-	error = vfs_permission(&nd, MAY_EXEC);
+	error = vfs_permission(&nd, MAY_EXEC | MAY_CHDIR);
 	if (error)
 		goto dput_and_out;
 
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 24d88e98a62..3cf62d26d49 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -55,7 +55,6 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
 #define LOOKUP_OPEN		(0x0100)
 #define LOOKUP_CREATE		(0x0200)
 #define LOOKUP_ACCESS		(0x0400)
-#define LOOKUP_CHDIR		(0x0800)
 
 extern int __user_walk(const char __user *, unsigned, struct nameidata *);
 extern int __user_walk_fd(int dfd, const char __user *, unsigned, struct nameidata *);
-- 
cgit v1.2.3


From 7f2da1e7d0330395e5e9e350b879b98a1ea495df Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 10 May 2008 20:44:54 -0400
Subject: [PATCH] kill altroot

long overdue...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/namei.c                    | 89 +------------------------------------------
 fs/namespace.c                |  8 +---
 fs/open.c                     |  3 +-
 include/asm-alpha/namei.h     | 17 ---------
 include/asm-arm/namei.h       | 25 ------------
 include/asm-avr32/namei.h     |  7 ----
 include/asm-blackfin/namei.h  | 19 ---------
 include/asm-cris/namei.h      | 17 ---------
 include/asm-frv/namei.h       | 18 ---------
 include/asm-h8300/namei.h     | 17 ---------
 include/asm-ia64/namei.h      | 25 ------------
 include/asm-m32r/namei.h      | 17 ---------
 include/asm-m68k/namei.h      | 17 ---------
 include/asm-m68knommu/namei.h |  1 -
 include/asm-mips/namei.h      | 11 ------
 include/asm-mn10300/namei.h   | 22 -----------
 include/asm-parisc/namei.h    | 17 ---------
 include/asm-powerpc/namei.h   | 20 ----------
 include/asm-s390/namei.h      | 21 ----------
 include/asm-sh/namei.h        | 17 ---------
 include/asm-sparc/namei.h     |  8 ----
 include/asm-sparc64/namei.h   |  1 -
 include/asm-um/namei.h        |  6 ---
 include/asm-v850/namei.h      | 17 ---------
 include/asm-x86/namei.h       | 11 ------
 include/asm-xtensa/namei.h    | 26 -------------
 include/linux/fs_struct.h     |  3 +-
 include/linux/namei.h         |  1 -
 kernel/exec_domain.c          |  1 -
 kernel/exit.c                 |  2 -
 kernel/fork.c                 |  7 ----
 31 files changed, 5 insertions(+), 466 deletions(-)
 delete mode 100644 include/asm-alpha/namei.h
 delete mode 100644 include/asm-arm/namei.h
 delete mode 100644 include/asm-avr32/namei.h
 delete mode 100644 include/asm-blackfin/namei.h
 delete mode 100644 include/asm-cris/namei.h
 delete mode 100644 include/asm-frv/namei.h
 delete mode 100644 include/asm-h8300/namei.h
 delete mode 100644 include/asm-ia64/namei.h
 delete mode 100644 include/asm-m32r/namei.h
 delete mode 100644 include/asm-m68k/namei.h
 delete mode 100644 include/asm-m68knommu/namei.h
 delete mode 100644 include/asm-mips/namei.h
 delete mode 100644 include/asm-mn10300/namei.h
 delete mode 100644 include/asm-parisc/namei.h
 delete mode 100644 include/asm-powerpc/namei.h
 delete mode 100644 include/asm-s390/namei.h
 delete mode 100644 include/asm-sh/namei.h
 delete mode 100644 include/asm-sparc/namei.h
 delete mode 100644 include/asm-sparc64/namei.h
 delete mode 100644 include/asm-um/namei.h
 delete mode 100644 include/asm-v850/namei.h
 delete mode 100644 include/asm-x86/namei.h
 delete mode 100644 include/asm-xtensa/namei.h

diff --git a/fs/namei.c b/fs/namei.c
index 6c76e1ee9c4..095818089ac 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -31,7 +31,6 @@
 #include <linux/file.h>
 #include <linux/fcntl.h>
 #include <linux/device_cgroup.h>
-#include <asm/namei.h>
 #include <asm/uaccess.h>
 
 #define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE])
@@ -562,27 +561,16 @@ out_unlock:
 	return result;
 }
 
-static int __emul_lookup_dentry(const char *, struct nameidata *);
-
 /* SMP-safe */
-static __always_inline int
+static __always_inline void
 walk_init_root(const char *name, struct nameidata *nd)
 {
 	struct fs_struct *fs = current->fs;
 
 	read_lock(&fs->lock);
-	if (fs->altroot.dentry && !(nd->flags & LOOKUP_NOALT)) {
-		nd->path = fs->altroot;
-		path_get(&fs->altroot);
-		read_unlock(&fs->lock);
-		if (__emul_lookup_dentry(name,nd))
-			return 0;
-		read_lock(&fs->lock);
-	}
 	nd->path = fs->root;
 	path_get(&fs->root);
 	read_unlock(&fs->lock);
-	return 1;
 }
 
 /*
@@ -623,12 +611,9 @@ static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *l
 
 	if (*link == '/') {
 		path_put(&nd->path);
-		if (!walk_init_root(link, nd))
-			/* weird __emul_prefix() stuff did it */
-			goto out;
+		walk_init_root(link, nd);
 	}
 	res = link_path_walk(link, nd);
-out:
 	if (nd->depth || res || nd->last_type!=LAST_NORM)
 		return res;
 	/*
@@ -1077,67 +1062,6 @@ static int path_walk(const char *name, struct nameidata *nd)
 	return link_path_walk(name, nd);
 }
 
-/* 
- * SMP-safe: Returns 1 and nd will have valid dentry and mnt, if
- * everything is done. Returns 0 and drops input nd, if lookup failed;
- */
-static int __emul_lookup_dentry(const char *name, struct nameidata *nd)
-{
-	if (path_walk(name, nd))
-		return 0;		/* something went wrong... */
-
-	if (!nd->path.dentry->d_inode ||
-	    S_ISDIR(nd->path.dentry->d_inode->i_mode)) {
-		struct path old_path = nd->path;
-		struct qstr last = nd->last;
-		int last_type = nd->last_type;
-		struct fs_struct *fs = current->fs;
-
-		/*
-		 * NAME was not found in alternate root or it's a directory.
-		 * Try to find it in the normal root:
-		 */
-		nd->last_type = LAST_ROOT;
-		read_lock(&fs->lock);
-		nd->path = fs->root;
-		path_get(&fs->root);
-		read_unlock(&fs->lock);
-		if (path_walk(name, nd) == 0) {
-			if (nd->path.dentry->d_inode) {
-				path_put(&old_path);
-				return 1;
-			}
-			path_put(&nd->path);
-		}
-		nd->path = old_path;
-		nd->last = last;
-		nd->last_type = last_type;
-	}
-	return 1;
-}
-
-void set_fs_altroot(void)
-{
-	char *emul = __emul_prefix();
-	struct nameidata nd;
-	struct path path = {}, old_path;
-	int err;
-	struct fs_struct *fs = current->fs;
-
-	if (!emul)
-		goto set_it;
-	err = path_lookup(emul, LOOKUP_FOLLOW|LOOKUP_DIRECTORY|LOOKUP_NOALT, &nd);
-	if (!err)
-		path = nd.path;
-set_it:
-	write_lock(&fs->lock);
-	old_path = fs->altroot;
-	fs->altroot = path;
-	write_unlock(&fs->lock);
-	if (old_path.dentry)
-		path_put(&old_path);
-}
-
 /* Returns 0 and nd will be valid on success; Retuns error, otherwise. */
 static int do_path_lookup(int dfd, const char *name,
 				unsigned int flags, struct nameidata *nd)
@@ -1153,14 +1077,6 @@ static int do_path_lookup(int dfd, const char *name,
 
 	if (*name=='/') {
 		read_lock(&fs->lock);
-		if (fs->altroot.dentry && !(nd->flags & LOOKUP_NOALT)) {
-			nd->path = fs->altroot;
-			path_get(&fs->altroot);
-			read_unlock(&fs->lock);
-			if (__emul_lookup_dentry(name,nd))
-				goto out; /* found in altroot */
-			read_lock(&fs->lock);
-		}
 		nd->path = fs->root;
 		path_get(&fs->root);
 		read_unlock(&fs->lock);
@@ -1194,7 +1110,6 @@ static int do_path_lookup(int dfd, const char *name,
 	}
 
 	retval = path_walk(name, nd);
-out:
 	if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
 				nd->path.dentry->d_inode))
 		audit_inode(name, nd->path.dentry);
diff --git a/fs/namespace.c b/fs/namespace.c
index f30b11e2240..c4fcf48acef 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1972,7 +1972,7 @@ static struct mnt_namespace *dup_mnt_ns(struct mnt_namespace *mnt_ns,
 		struct fs_struct *fs)
 {
 	struct mnt_namespace *new_ns;
-	struct vfsmount *rootmnt = NULL, *pwdmnt = NULL, *altrootmnt = NULL;
+	struct vfsmount *rootmnt = NULL, *pwdmnt = NULL;
 	struct vfsmount *p, *q;
 
 	new_ns = kmalloc(sizeof(struct mnt_namespace), GFP_KERNEL);
@@ -2015,10 +2015,6 @@ static struct mnt_namespace *dup_mnt_ns(struct mnt_namespace *mnt_ns,
 				pwdmnt = p;
 				fs->pwd.mnt = mntget(q);
 			}
-			if (p == fs->altroot.mnt) {
-				altrootmnt = p;
-				fs->altroot.mnt = mntget(q);
-			}
 		}
 		p = next_mnt(p, mnt_ns->root);
 		q = next_mnt(q, new_ns->root);
@@ -2029,8 +2025,6 @@ static struct mnt_namespace *dup_mnt_ns(struct mnt_namespace *mnt_ns,
 		mntput(rootmnt);
 	if (pwdmnt)
 		mntput(pwdmnt);
-	if (altrootmnt)
-		mntput(altrootmnt);
 
 	return new_ns;
 }
diff --git a/fs/open.c b/fs/open.c
index 8e02d42bfe4..d3a2a00f52d 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -548,7 +548,7 @@ asmlinkage long sys_chroot(const char __user * filename)
 	struct nameidata nd;
 	int error;
 
-	error = __user_walk(filename, LOOKUP_FOLLOW | LOOKUP_DIRECTORY | LOOKUP_NOALT, &nd);
+	error = __user_walk(filename, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, &nd);
 	if (error)
 		goto out;
 
@@ -561,7 +561,6 @@ asmlinkage long sys_chroot(const char __user * filename)
 		goto dput_and_out;
 
 	set_fs_root(current->fs, &nd.path);
-	set_fs_altroot();
 	error = 0;
 dput_and_out:
 	path_put(&nd.path);
diff --git a/include/asm-alpha/namei.h b/include/asm-alpha/namei.h
deleted file mode 100644
index 5cc9bb39499..00000000000
--- a/include/asm-alpha/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
- * linux/include/asm-alpha/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ALPHA_NAMEI_H
-#define __ALPHA_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __ALPHA_NAMEI_H */
diff --git a/include/asm-arm/namei.h b/include/asm-arm/namei.h
deleted file mode 100644
index a402d3b9d0f..00000000000
--- a/include/asm-arm/namei.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* 
- * linux/include/asm-arm/namei.h
- *
- * Routines to handle famous /usr/gnemul
- * Derived from the Sparc version of this file
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASMARM_NAMEI_H
-#define __ASMARM_NAMEI_H
-
-#define ARM_BSD_EMUL "usr/gnemul/bsd/"
-
-static inline char *__emul_prefix(void)
-{
-	switch (current->personality) {
-	case PER_BSD:
-		return ARM_BSD_EMUL;
-	default:
-		return NULL;
-	}
-}
-
-#endif /* __ASMARM_NAMEI_H */
diff --git a/include/asm-avr32/namei.h b/include/asm-avr32/namei.h
deleted file mode 100644
index f0a26de06ca..00000000000
--- a/include/asm-avr32/namei.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_AVR32_NAMEI_H
-#define __ASM_AVR32_NAMEI_H
-
-/* This dummy routine may be changed to something useful */
-#define __emul_prefix() NULL
-
-#endif /* __ASM_AVR32_NAMEI_H */
diff --git a/include/asm-blackfin/namei.h b/include/asm-blackfin/namei.h
deleted file mode 100644
index 8b89a2d65cb..00000000000
--- a/include/asm-blackfin/namei.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm/namei.h
- *
- * Included from linux/fs/namei.c
- *
- * Changes made by Lineo Inc.    May 2001
- */
-
-#ifndef __BFIN_NAMEI_H
-#define __BFIN_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
diff --git a/include/asm-cris/namei.h b/include/asm-cris/namei.h
deleted file mode 100644
index 8a3be7a6d9f..00000000000
--- a/include/asm-cris/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $
- * linux/include/asm-cris/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __CRIS_NAMEI_H
-#define __CRIS_NAMEI_H
-
-/* used to find file-system prefixes for doing emulations
- * see for example asm-sparc/namei.h
- * we don't use it...
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __CRIS_NAMEI_H */
diff --git a/include/asm-frv/namei.h b/include/asm-frv/namei.h
deleted file mode 100644
index 4ea57171d95..00000000000
--- a/include/asm-frv/namei.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * include/asm-frv/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASM_NAMEI_H
-#define __ASM_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
-
diff --git a/include/asm-h8300/namei.h b/include/asm-h8300/namei.h
deleted file mode 100644
index ab6f196db6e..00000000000
--- a/include/asm-h8300/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-h8300/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __H8300_NAMEI_H
-#define __H8300_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
diff --git a/include/asm-ia64/namei.h b/include/asm-ia64/namei.h
deleted file mode 100644
index 78e76807908..00000000000
--- a/include/asm-ia64/namei.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_IA64_NAMEI_H
-#define _ASM_IA64_NAMEI_H
-
-/*
- * Modified 1998, 1999, 2001
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/ptrace.h>
-#include <asm/system.h>
-
-#define EMUL_PREFIX_LINUX_IA32 "/emul/ia32-linux/"
-
-static inline char *
-__emul_prefix (void)
-{
-	switch (current->personality) {
-	      case PER_LINUX32:
-		return EMUL_PREFIX_LINUX_IA32;
-	      default:
-		return NULL;
-	}
-}
-
-#endif /* _ASM_IA64_NAMEI_H */
diff --git a/include/asm-m32r/namei.h b/include/asm-m32r/namei.h
deleted file mode 100644
index 210f8056b80..00000000000
--- a/include/asm-m32r/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_M32R_NAMEI_H
-#define _ASM_M32R_NAMEI_H
-
-/*
- * linux/include/asm-m32r/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_M32R_NAMEI_H */
diff --git a/include/asm-m68k/namei.h b/include/asm-m68k/namei.h
deleted file mode 100644
index f33f243b644..00000000000
--- a/include/asm-m68k/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-m68k/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __M68K_NAMEI_H
-#define __M68K_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
diff --git a/include/asm-m68knommu/namei.h b/include/asm-m68knommu/namei.h
deleted file mode 100644
index 31a85d27b93..00000000000
--- a/include/asm-m68knommu/namei.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/namei.h>
diff --git a/include/asm-mips/namei.h b/include/asm-mips/namei.h
deleted file mode 100644
index a6605a75246..00000000000
--- a/include/asm-mips/namei.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_NAMEI_H
-#define _ASM_NAMEI_H
-
-/*
- * This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-mn10300/namei.h b/include/asm-mn10300/namei.h
deleted file mode 100644
index bd9ce94aeb6..00000000000
--- a/include/asm-mn10300/namei.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Emulation stuff
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_NAMEI_H
-#define _ASM_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-parisc/namei.h b/include/asm-parisc/namei.h
deleted file mode 100644
index 8d29b3d9fb3..00000000000
--- a/include/asm-parisc/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
- * linux/include/asm-parisc/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __PARISC_NAMEI_H
-#define __PARISC_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __PARISC_NAMEI_H */
diff --git a/include/asm-powerpc/namei.h b/include/asm-powerpc/namei.h
deleted file mode 100644
index 657443474a6..00000000000
--- a/include/asm-powerpc/namei.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_NAMEI_H
-#define _ASM_POWERPC_NAMEI_H
-
-#ifdef __KERNEL__
-
-/*
- * Adapted from include/asm-alpha/namei.h
- *
- * Included from fs/namei.c
- */
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_NAMEI_H */
diff --git a/include/asm-s390/namei.h b/include/asm-s390/namei.h
deleted file mode 100644
index 3e286bdde4b..00000000000
--- a/include/asm-s390/namei.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  include/asm-s390/namei.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/namei.h"
- *
- *  Included from linux/fs/namei.c
- */
-
-#ifndef __S390_NAMEI_H
-#define __S390_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __S390_NAMEI_H */
diff --git a/include/asm-sh/namei.h b/include/asm-sh/namei.h
deleted file mode 100644
index 338a5d94714..00000000000
--- a/include/asm-sh/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.3 2000/07/04 06:24:49 gniibe Exp $
- * linux/include/asm-sh/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASM_SH_NAMEI_H
-#define __ASM_SH_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __ASM_SH_NAMEI_H */
diff --git a/include/asm-sparc/namei.h b/include/asm-sparc/namei.h
deleted file mode 100644
index eff944b8e32..00000000000
--- a/include/asm-sparc/namei.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ___ASM_SPARC_NAMEI_H
-#define ___ASM_SPARC_NAMEI_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm-sparc/namei_64.h>
-#else
-#include <asm-sparc/namei_32.h>
-#endif
-#endif
diff --git a/include/asm-sparc64/namei.h b/include/asm-sparc64/namei.h
deleted file mode 100644
index 1344a910ba2..00000000000
--- a/include/asm-sparc64/namei.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/namei.h>
diff --git a/include/asm-um/namei.h b/include/asm-um/namei.h
deleted file mode 100644
index 002984d5bc8..00000000000
--- a/include/asm-um/namei.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_NAMEI_H
-#define __UM_NAMEI_H
-
-#include "asm/arch/namei.h"
-
-#endif
diff --git a/include/asm-v850/namei.h b/include/asm-v850/namei.h
deleted file mode 100644
index ee8339b2384..00000000000
--- a/include/asm-v850/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-v850/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __V850_NAMEI_H__
-#define __V850_NAMEI_H__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __V850_NAMEI_H__ */
diff --git a/include/asm-x86/namei.h b/include/asm-x86/namei.h
deleted file mode 100644
index 415ef5d9550..00000000000
--- a/include/asm-x86/namei.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_X86_NAMEI_H
-#define _ASM_X86_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_X86_NAMEI_H */
diff --git a/include/asm-xtensa/namei.h b/include/asm-xtensa/namei.h
deleted file mode 100644
index 3fdff039d27..00000000000
--- a/include/asm-xtensa/namei.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-xtensa/namei.h
- *
- * Included from linux/fs/namei.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_NAMEI_H
-#define _XTENSA_NAMEI_H
-
-#ifdef __KERNEL__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif	/* __KERNEL__ */
-#endif	/* _XTENSA_NAMEI_H */
diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h
index 282f5421912..9e5a06e78d0 100644
--- a/include/linux/fs_struct.h
+++ b/include/linux/fs_struct.h
@@ -7,7 +7,7 @@ struct fs_struct {
 	atomic_t count;
 	rwlock_t lock;
 	int umask;
-	struct path root, pwd, altroot;
+	struct path root, pwd;
 };
 
 #define INIT_FS {				\
@@ -19,7 +19,6 @@ struct fs_struct {
 extern struct kmem_cache *fs_cachep;
 
 extern void exit_fs(struct task_struct *);
-extern void set_fs_altroot(void);
 extern void set_fs_root(struct fs_struct *, struct path *);
 extern void set_fs_pwd(struct fs_struct *, struct path *);
 extern struct fs_struct *copy_fs_struct(struct fs_struct *);
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 3cf62d26d49..768773d5785 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -47,7 +47,6 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
 #define LOOKUP_DIRECTORY	 2
 #define LOOKUP_CONTINUE		 4
 #define LOOKUP_PARENT		16
-#define LOOKUP_NOALT		32
 #define LOOKUP_REVAL		64
 /*
  * Intent data
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index c1ef192aa65..0d407e88673 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -168,7 +168,6 @@ __set_personality(u_long personality)
 	current->personality = personality;
 	oep = current_thread_info()->exec_domain;
 	current_thread_info()->exec_domain = ep;
-	set_fs_altroot();
 
 	module_put(oep->module);
 	return 0;
diff --git a/kernel/exit.c b/kernel/exit.c
index 6cdf60712bd..0caf590548a 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -565,8 +565,6 @@ void put_fs_struct(struct fs_struct *fs)
 	if (atomic_dec_and_test(&fs->count)) {
 		path_put(&fs->root);
 		path_put(&fs->pwd);
-		if (fs->altroot.dentry)
-			path_put(&fs->altroot);
 		kmem_cache_free(fs_cachep, fs);
 	}
 }
diff --git a/kernel/fork.c b/kernel/fork.c
index abb3ed6298f..5e050c1317c 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -657,13 +657,6 @@ static struct fs_struct *__copy_fs_struct(struct fs_struct *old)
 		path_get(&old->root);
 		fs->pwd = old->pwd;
 		path_get(&old->pwd);
-		if (old->altroot.dentry) {
-			fs->altroot = old->altroot;
-			path_get(&old->altroot);
-		} else {
-			fs->altroot.mnt = NULL;
-			fs->altroot.dentry = NULL;
-		}
 		read_unlock(&old->lock);
 	}
 	return fs;
-- 
cgit v1.2.3


From a110343f0d6d41f68b7cf8c00b57a3172c67f816 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu, 17 Jul 2008 09:19:08 -0400
Subject: [PATCH] fix MAY_CHDIR/MAY_ACCESS/LOOKUP_ACCESS mess

* MAY_CHDIR is redundant - it's an equivalent of MAY_ACCESS
* MAY_ACCESS on fuse should affect only the last step of pathname resolution
* fchdir() and chroot() should pass MAY_ACCESS, for the same reason why
  chdir() needs that.
* now that we pass MAY_ACCESS explicitly in all cases, LOOKUP_ACCESS can be
  removed; it has no business being in nameidata.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/fuse/dir.c         |  2 +-
 fs/namei.c            |  2 --
 fs/open.c             | 10 +++++-----
 include/linux/fs.h    |  3 +--
 include/linux/namei.h |  1 -
 5 files changed, 7 insertions(+), 11 deletions(-)

diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 48a7934cb95..fd03330cade 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -962,7 +962,7 @@ static int fuse_permission(struct inode *inode, int mask)
 		   exist.  So if permissions are revoked this won't be
 		   noticed immediately, only after the attribute
 		   timeout has expired */
-	} else if (mask & (MAY_ACCESS | MAY_CHDIR)) {
+	} else if (mask & MAY_ACCESS) {
 		err = fuse_access(inode, mask);
 	} else if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		if (!(inode->i_mode & S_IXUGO)) {
diff --git a/fs/namei.c b/fs/namei.c
index 095818089ac..33dcaf025c4 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -265,8 +265,6 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 	if (inode->i_op && inode->i_op->permission) {
 		int extra = 0;
 		if (nd) {
-			if (nd->flags & LOOKUP_ACCESS)
-				extra |= MAY_ACCESS;
 			if (nd->flags & LOOKUP_OPEN)
 				extra |= MAY_OPEN;
 		}
diff --git a/fs/open.c b/fs/open.c
index d3a2a00f52d..3317e1909b2 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -457,11 +457,11 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 			old_cap = cap_set_effective(current->cap_permitted);
 	}
 
-	res = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW|LOOKUP_ACCESS, &nd);
+	res = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW, &nd);
 	if (res)
 		goto out;
 
-	res = vfs_permission(&nd, mode);
+	res = vfs_permission(&nd, mode | MAY_ACCESS);
 	/* SuS v2 requires we report a read only fs too */
 	if(res || !(mode & S_IWOTH) ||
 	   special_file(nd.path.dentry->d_inode->i_mode))
@@ -505,7 +505,7 @@ asmlinkage long sys_chdir(const char __user * filename)
 	if (error)
 		goto out;
 
-	error = vfs_permission(&nd, MAY_EXEC | MAY_CHDIR);
+	error = vfs_permission(&nd, MAY_EXEC | MAY_ACCESS);
 	if (error)
 		goto dput_and_out;
 
@@ -534,7 +534,7 @@ asmlinkage long sys_fchdir(unsigned int fd)
 	if (!S_ISDIR(inode->i_mode))
 		goto out_putf;
 
-	error = file_permission(file, MAY_EXEC);
+	error = file_permission(file, MAY_EXEC | MAY_ACCESS);
 	if (!error)
 		set_fs_pwd(current->fs, &file->f_path);
 out_putf:
@@ -552,7 +552,7 @@ asmlinkage long sys_chroot(const char __user * filename)
 	if (error)
 		goto out;
 
-	error = vfs_permission(&nd, MAY_EXEC);
+	error = vfs_permission(&nd, MAY_EXEC | MAY_ACCESS);
 	if (error)
 		goto dput_and_out;
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 25998e803fc..d8721e818b4 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -61,8 +61,7 @@ extern int dir_notify_enable;
 #define MAY_READ 4
 #define MAY_APPEND 8
 #define MAY_ACCESS 16
-#define MAY_CHDIR 32
-#define MAY_OPEN 64
+#define MAY_OPEN 32
 
 #define FMODE_READ 1
 #define FMODE_WRITE 2
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 768773d5785..60e35a02f6c 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -53,7 +53,6 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
  */
 #define LOOKUP_OPEN		(0x0100)
 #define LOOKUP_CREATE		(0x0200)
-#define LOOKUP_ACCESS		(0x0400)
 
 extern int __user_walk(const char __user *, unsigned, struct nameidata *);
 extern int __user_walk_fd(int dfd, const char __user *, unsigned, struct nameidata *);
-- 
cgit v1.2.3


From b77b0646ef4efe31a7449bb3d9360fd00f95433d Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu, 17 Jul 2008 09:37:02 -0400
Subject: [PATCH] pass MAY_OPEN to vfs_permission() explicitly

... and get rid of the last "let's deduce mask from nameidata->flags"
bit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/exec.c                  |  4 ++--
 fs/namei.c                 | 13 ++++---------
 include/linux/security.h   |  7 +++----
 security/capability.c      |  3 +--
 security/security.c        |  4 ++--
 security/selinux/hooks.c   |  5 ++---
 security/smack/smack_lsm.c |  3 +--
 7 files changed, 15 insertions(+), 24 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index b8792a13153..0ba5d355c5a 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -118,7 +118,7 @@ asmlinkage long sys_uselib(const char __user * library)
 	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
 		goto exit;
 
-	error = vfs_permission(&nd, MAY_READ | MAY_EXEC);
+	error = vfs_permission(&nd, MAY_READ | MAY_EXEC | MAY_OPEN);
 	if (error)
 		goto exit;
 
@@ -666,7 +666,7 @@ struct file *open_exec(const char *name)
 		struct inode *inode = nd.path.dentry->d_inode;
 		file = ERR_PTR(-EACCES);
 		if (S_ISREG(inode->i_mode)) {
-			int err = vfs_permission(&nd, MAY_EXEC);
+			int err = vfs_permission(&nd, MAY_EXEC | MAY_OPEN);
 			file = ERR_PTR(err);
 			if (!err) {
 				file = nameidata_to_filp(&nd,
diff --git a/fs/namei.c b/fs/namei.c
index 33dcaf025c4..6b0e8e5e079 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -263,12 +263,7 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 
 	/* Ordinary permission routines do not understand MAY_APPEND. */
 	if (inode->i_op && inode->i_op->permission) {
-		int extra = 0;
-		if (nd) {
-			if (nd->flags & LOOKUP_OPEN)
-				extra |= MAY_OPEN;
-		}
-		retval = inode->i_op->permission(inode, mask | extra);
+		retval = inode->i_op->permission(inode, mask);
 		if (!retval) {
 			/*
 			 * Exec permission on a regular file is denied if none
@@ -292,7 +287,7 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 		return retval;
 
 	return security_inode_permission(inode,
-			mask & (MAY_READ|MAY_WRITE|MAY_EXEC), nd);
+			mask & (MAY_READ|MAY_WRITE|MAY_EXEC));
 }
 
 /**
@@ -492,7 +487,7 @@ static int exec_permission_lite(struct inode *inode,
 
 	return -EACCES;
 ok:
-	return security_inode_permission(inode, MAY_EXEC, nd);
+	return security_inode_permission(inode, MAY_EXEC);
 }
 
 /*
@@ -1692,7 +1687,7 @@ struct file *do_filp_open(int dfd, const char *pathname,
 	int will_write;
 	int flag = open_to_namei_flags(open_flag);
 
-	acc_mode = ACC_MODE(flag);
+	acc_mode = MAY_OPEN | ACC_MODE(flag);
 
 	/* O_TRUNC implies we need access checks for write permissions */
 	if (flag & O_TRUNC)
diff --git a/include/linux/security.h b/include/linux/security.h
index f0e9adb22ac..fd96e7f8a6f 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -1362,7 +1362,7 @@ struct security_operations {
 			     struct inode *new_dir, struct dentry *new_dentry);
 	int (*inode_readlink) (struct dentry *dentry);
 	int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd);
-	int (*inode_permission) (struct inode *inode, int mask, struct nameidata *nd);
+	int (*inode_permission) (struct inode *inode, int mask);
 	int (*inode_setattr)	(struct dentry *dentry, struct iattr *attr);
 	int (*inode_getattr) (struct vfsmount *mnt, struct dentry *dentry);
 	void (*inode_delete) (struct inode *inode);
@@ -1628,7 +1628,7 @@ int security_inode_rename(struct inode *old_dir, struct dentry *old_dentry,
 			  struct inode *new_dir, struct dentry *new_dentry);
 int security_inode_readlink(struct dentry *dentry);
 int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd);
-int security_inode_permission(struct inode *inode, int mask, struct nameidata *nd);
+int security_inode_permission(struct inode *inode, int mask);
 int security_inode_setattr(struct dentry *dentry, struct iattr *attr);
 int security_inode_getattr(struct vfsmount *mnt, struct dentry *dentry);
 void security_inode_delete(struct inode *inode);
@@ -2021,8 +2021,7 @@ static inline int security_inode_follow_link(struct dentry *dentry,
 	return 0;
 }
 
-static inline int security_inode_permission(struct inode *inode, int mask,
-					     struct nameidata *nd)
+static inline int security_inode_permission(struct inode *inode, int mask)
 {
 	return 0;
 }
diff --git a/security/capability.c b/security/capability.c
index 5b01c0b0242..63d10da515a 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -211,8 +211,7 @@ static int cap_inode_follow_link(struct dentry *dentry,
 	return 0;
 }
 
-static int cap_inode_permission(struct inode *inode, int mask,
-				struct nameidata *nd)
+static int cap_inode_permission(struct inode *inode, int mask)
 {
 	return 0;
 }
diff --git a/security/security.c b/security/security.c
index 59f23b5918b..78ed3ffde24 100644
--- a/security/security.c
+++ b/security/security.c
@@ -429,11 +429,11 @@ int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd)
 	return security_ops->inode_follow_link(dentry, nd);
 }
 
-int security_inode_permission(struct inode *inode, int mask, struct nameidata *nd)
+int security_inode_permission(struct inode *inode, int mask)
 {
 	if (unlikely(IS_PRIVATE(inode)))
 		return 0;
-	return security_ops->inode_permission(inode, mask, nd);
+	return security_ops->inode_permission(inode, mask);
 }
 
 int security_inode_setattr(struct dentry *dentry, struct iattr *attr)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 3481cde5bf1..5ba13908b5b 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2624,12 +2624,11 @@ static int selinux_inode_follow_link(struct dentry *dentry, struct nameidata *na
 	return dentry_has_perm(current, NULL, dentry, FILE__READ);
 }
 
-static int selinux_inode_permission(struct inode *inode, int mask,
-				    struct nameidata *nd)
+static int selinux_inode_permission(struct inode *inode, int mask)
 {
 	int rc;
 
-	rc = secondary_ops->inode_permission(inode, mask, nd);
+	rc = secondary_ops->inode_permission(inode, mask);
 	if (rc)
 		return rc;
 
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index ee5a51cbc5e..1b40e558f98 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -522,8 +522,7 @@ static int smack_inode_rename(struct inode *old_inode,
  *
  * Returns 0 if access is permitted, -EACCES otherwise
  */
-static int smack_inode_permission(struct inode *inode, int mask,
-				  struct nameidata *nd)
+static int smack_inode_permission(struct inode *inode, int mask)
 {
 	/*
 	 * No permission to check. Existence test. Yup, it's there.
-- 
cgit v1.2.3


From 672b16b2f66c149888bd876a4f92342112205fe1 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu, 17 Jul 2008 09:45:01 -0400
Subject: [PATCH] more nameidata removal: exec_permission_lite() doesn't need
 it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/namei.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index 6b0e8e5e079..6d75430358a 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -460,8 +460,7 @@ static struct dentry * cached_lookup(struct dentry * parent, struct qstr * name,
  * short-cut DAC fails, then call permission() to do more
  * complete permission check.
  */
-static int exec_permission_lite(struct inode *inode,
-				       struct nameidata *nd)
+static int exec_permission_lite(struct inode *inode)
 {
 	umode_t	mode = inode->i_mode;
 
@@ -884,7 +883,7 @@ static int __link_path_walk(const char *name, struct nameidata *nd)
 		unsigned int c;
 
 		nd->flags |= LOOKUP_CONTINUE;
-		err = exec_permission_lite(inode, nd);
+		err = exec_permission_lite(inode);
 		if (err == -EAGAIN)
 			err = vfs_permission(nd, MAY_EXEC);
  		if (err)
-- 
cgit v1.2.3


From 88b387824fdaecb6ba0f471acf0aadf7d24739fd Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Mon, 21 Jul 2008 18:06:36 +0800
Subject: [PATCH] vfs: use kstrdup() and check failing allocation

- use kstrdup() instead of kmalloc() + memcpy()
- return NULL if allocating ->mnt_devname failed
- mnt_devname should be const

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/namespace.c        | 24 +++++++++++++-----------
 include/linux/mount.h |  2 +-
 2 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/fs/namespace.c b/fs/namespace.c
index c4fcf48acef..26380f59953 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -112,9 +112,13 @@ struct vfsmount *alloc_vfsmnt(const char *name)
 		int err;
 
 		err = mnt_alloc_id(mnt);
-		if (err) {
-			kmem_cache_free(mnt_cache, mnt);
-			return NULL;
+		if (err)
+			goto out_free_cache;
+
+		if (name) {
+			mnt->mnt_devname = kstrdup(name, GFP_KERNEL);
+			if (!mnt->mnt_devname)
+				goto out_free_id;
 		}
 
 		atomic_set(&mnt->mnt_count, 1);
@@ -127,16 +131,14 @@ struct vfsmount *alloc_vfsmnt(const char *name)
 		INIT_LIST_HEAD(&mnt->mnt_slave_list);
 		INIT_LIST_HEAD(&mnt->mnt_slave);
 		atomic_set(&mnt->__mnt_writers, 0);
-		if (name) {
-			int size = strlen(name) + 1;
-			char *newname = kmalloc(size, GFP_KERNEL);
-			if (newname) {
-				memcpy(newname, name, size);
-				mnt->mnt_devname = newname;
-			}
-		}
 	}
 	return mnt;
+
+out_free_id:
+	mnt_free_id(mnt);
+out_free_cache:
+	kmem_cache_free(mnt_cache, mnt);
+	return NULL;
 }
 
 /*
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 4374d1adeb4..b5efaa2132a 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -47,7 +47,7 @@ struct vfsmount {
 	struct list_head mnt_child;	/* and going through their mnt_child */
 	int mnt_flags;
 	/* 4 bytes hole on 64bits arches */
-	char *mnt_devname;		/* Name of device e.g. /dev/dsk/hda1 */
+	const char *mnt_devname;	/* Name of device e.g. /dev/dsk/hda1 */
 	struct list_head mnt_list;
 	struct list_head mnt_expire;	/* link in fs-specific expiry list */
 	struct list_head mnt_share;	/* circular list of shared mounts */
-- 
cgit v1.2.3


From 9767d74957450da6365c363d69e3d02d605d7375 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 1 Jul 2008 15:01:26 +0200
Subject: [patch 1/4] vfs: utimes: move owner check into inode_change_ok()

Add a new ia_valid flag: ATTR_TIMES_SET, to handle the
UTIMES_OMIT/UTIMES_NOW and UTIMES_NOW/UTIMES_OMIT cases.  In these
cases neither ATTR_MTIME_SET nor ATTR_ATIME_SET is in the flags, yet
the POSIX draft specifies that permission checking is performed the
same way as if one or both of the times was explicitly set to a
timestamp.

See the path "vfs: utimensat(): fix error checking for
{UTIME_NOW,UTIME_OMIT} case" by Michael Kerrisk for the patch
introducing this behavior.

This is a cleanup, as well as allowing filesystems (NFS/fuse/...) to
perform their own permission checking instead of the default.

CC: Ulrich Drepper <drepper@redhat.com>
CC: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/attr.c          |  2 +-
 fs/utimes.c        | 17 ++++-------------
 include/linux/fs.h | 33 +++++++++++++++++----------------
 3 files changed, 22 insertions(+), 30 deletions(-)

diff --git a/fs/attr.c b/fs/attr.c
index 966b73e25f8..765fc75fab3 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -51,7 +51,7 @@ int inode_change_ok(struct inode *inode, struct iattr *attr)
 	}
 
 	/* Check for setting the inode time. */
-	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) {
+	if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)) {
 		if (!is_owner_or_cap(inode))
 			goto error;
 	}
diff --git a/fs/utimes.c b/fs/utimes.c
index b6b664e7145..ecf8941ba34 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -101,7 +101,6 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags
 		     times[1].tv_nsec == UTIME_NOW)
 		times = NULL;
 
-	/* In most cases, the checks are done in inode_change_ok() */
 	newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME;
 	if (times) {
 		error = -EPERM;
@@ -123,21 +122,13 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags
 			newattrs.ia_mtime.tv_nsec = times[1].tv_nsec;
 			newattrs.ia_valid |= ATTR_MTIME_SET;
 		}
-
 		/*
-		 * For the UTIME_OMIT/UTIME_NOW and UTIME_NOW/UTIME_OMIT
-		 * cases, we need to make an extra check that is not done by
-		 * inode_change_ok().
+		 * Tell inode_change_ok(), that this is an explicit time
+		 * update, even if neither ATTR_ATIME_SET nor ATTR_MTIME_SET
+		 * were used.
 		 */
-		if (((times[0].tv_nsec == UTIME_NOW &&
-			    times[1].tv_nsec == UTIME_OMIT)
-		     ||
-		     (times[0].tv_nsec == UTIME_OMIT &&
-			    times[1].tv_nsec == UTIME_NOW))
-		    && !is_owner_or_cap(inode))
-			goto mnt_drop_write_and_out;
+		newattrs.ia_valid |= ATTR_TIMES_SET;
 	} else {
-
 		/*
 		 * If times is NULL (or both times are UTIME_NOW),
 		 * then we need to check permissions, because
diff --git a/include/linux/fs.h b/include/linux/fs.h
index d8721e818b4..527b9e482f9 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -320,22 +320,23 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
  * Attribute flags.  These should be or-ed together to figure out what
  * has been changed!
  */
-#define ATTR_MODE	1
-#define ATTR_UID	2
-#define ATTR_GID	4
-#define ATTR_SIZE	8
-#define ATTR_ATIME	16
-#define ATTR_MTIME	32
-#define ATTR_CTIME	64
-#define ATTR_ATIME_SET	128
-#define ATTR_MTIME_SET	256
-#define ATTR_FORCE	512	/* Not a change, but a change it */
-#define ATTR_ATTR_FLAG	1024
-#define ATTR_KILL_SUID	2048
-#define ATTR_KILL_SGID	4096
-#define ATTR_FILE	8192
-#define ATTR_KILL_PRIV	16384
-#define ATTR_OPEN	32768	/* Truncating from open(O_TRUNC) */
+#define ATTR_MODE	(1 << 0)
+#define ATTR_UID	(1 << 1)
+#define ATTR_GID	(1 << 2)
+#define ATTR_SIZE	(1 << 3)
+#define ATTR_ATIME	(1 << 4)
+#define ATTR_MTIME	(1 << 5)
+#define ATTR_CTIME	(1 << 6)
+#define ATTR_ATIME_SET	(1 << 7)
+#define ATTR_MTIME_SET	(1 << 8)
+#define ATTR_FORCE	(1 << 9) /* Not a change, but a change it */
+#define ATTR_ATTR_FLAG	(1 << 10)
+#define ATTR_KILL_SUID	(1 << 11)
+#define ATTR_KILL_SGID	(1 << 12)
+#define ATTR_FILE	(1 << 13)
+#define ATTR_KILL_PRIV	(1 << 14)
+#define ATTR_OPEN	(1 << 15) /* Truncating from open(O_TRUNC) */
+#define ATTR_TIMES_SET	(1 << 16)
 
 /*
  * This is the Inode Attributes structure, used for notify_change().  It
-- 
cgit v1.2.3


From e9b76fedc61235da80b6b7f81dfd67ec224dfb49 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 1 Jul 2008 15:01:27 +0200
Subject: [patch 2/4] vfs: utimes cleanup

Untange the mess that is do_utimes().  Add kerneldoc comment to
do_utimes().

CC: Ulrich Drepper <drepper@redhat.com>
CC: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/utimes.c | 114 ++++++++++++++++++++++++++++++++++--------------------------
 1 file changed, 65 insertions(+), 49 deletions(-)

diff --git a/fs/utimes.c b/fs/utimes.c
index ecf8941ba34..8e09dbdfd7f 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -48,54 +48,15 @@ static bool nsec_valid(long nsec)
 	return nsec >= 0 && nsec <= 999999999;
 }
 
-/* If times==NULL, set access and modification to current time,
- * must be owner or have write permission.
- * Else, update from *times, must be owner or super user.
- */
-long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags)
+static int utimes_common(struct path *path, struct timespec *times)
 {
 	int error;
-	struct nameidata nd;
-	struct dentry *dentry;
-	struct inode *inode;
 	struct iattr newattrs;
-	struct file *f = NULL;
-	struct vfsmount *mnt;
-
-	error = -EINVAL;
-	if (times && (!nsec_valid(times[0].tv_nsec) ||
-		      !nsec_valid(times[1].tv_nsec))) {
-		goto out;
-	}
-
-	if (flags & ~AT_SYMLINK_NOFOLLOW)
-		goto out;
-
-	if (filename == NULL && dfd != AT_FDCWD) {
-		error = -EINVAL;
-		if (flags & AT_SYMLINK_NOFOLLOW)
-			goto out;
-
-		error = -EBADF;
-		f = fget(dfd);
-		if (!f)
-			goto out;
-		dentry = f->f_path.dentry;
-		mnt = f->f_path.mnt;
-	} else {
-		error = __user_walk_fd(dfd, filename, (flags & AT_SYMLINK_NOFOLLOW) ? 0 : LOOKUP_FOLLOW, &nd);
-		if (error)
-			goto out;
-
-		dentry = nd.path.dentry;
-		mnt = nd.path.mnt;
-	}
-
-	inode = dentry->d_inode;
+	struct inode *inode = path->dentry->d_inode;
 
-	error = mnt_want_write(mnt);
+	error = mnt_want_write(path->mnt);
 	if (error)
-		goto dput_and_out;
+		goto out;
 
 	if (times && times[0].tv_nsec == UTIME_NOW &&
 		     times[1].tv_nsec == UTIME_NOW)
@@ -145,15 +106,70 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags
 		}
 	}
 	mutex_lock(&inode->i_mutex);
-	error = notify_change(dentry, &newattrs);
+	error = notify_change(path->dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
+
 mnt_drop_write_and_out:
-	mnt_drop_write(mnt);
-dput_and_out:
-	if (f)
-		fput(f);
-	else
+	mnt_drop_write(path->mnt);
+out:
+	return error;
+}
+
+/*
+ * do_utimes - change times on filename or file descriptor
+ * @dfd: open file descriptor, -1 or AT_FDCWD
+ * @filename: path name or NULL
+ * @times: new times or NULL
+ * @flags: zero or more flags (only AT_SYMLINK_NOFOLLOW for the moment)
+ *
+ * If filename is NULL and dfd refers to an open file, then operate on
+ * the file.  Otherwise look up filename, possibly using dfd as a
+ * starting point.
+ *
+ * If times==NULL, set access and modification to current time,
+ * must be owner or have write permission.
+ * Else, update from *times, must be owner or super user.
+ */
+long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags)
+{
+	int error = -EINVAL;
+
+	if (times && (!nsec_valid(times[0].tv_nsec) ||
+		      !nsec_valid(times[1].tv_nsec))) {
+		goto out;
+	}
+
+	if (flags & ~AT_SYMLINK_NOFOLLOW)
+		goto out;
+
+	if (filename == NULL && dfd != AT_FDCWD) {
+		struct file *file;
+
+		if (flags & AT_SYMLINK_NOFOLLOW)
+			goto out;
+
+		file = fget(dfd);
+		error = -EBADF;
+		if (!file)
+			goto out;
+
+		error = utimes_common(&file->f_path, times);
+		fput(file);
+	} else {
+		struct nameidata nd;
+		int lookup_flags = 0;
+
+		if (!(flags & AT_SYMLINK_NOFOLLOW))
+			lookup_flags |= LOOKUP_FOLLOW;
+
+		error = __user_walk_fd(dfd, filename, lookup_flags, &nd);
+		if (error)
+			goto out;
+
+		error = utimes_common(&nd.path, times);
 		path_put(&nd.path);
+	}
+
 out:
 	return error;
 }
-- 
cgit v1.2.3


From b1da47e29e467f1ec36dc78d009bfb109fd533c7 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 1 Jul 2008 15:01:28 +0200
Subject: [patch 3/4] fat: dont call notify_change

The FAT_IOCTL_SET_ATTRIBUTES ioctl() calls notify_change() to change
the file mode before changing the inode attributes.  Replace with
explicit calls to security_inode_setattr(), fat_setattr() and
fsnotify_change().

This is equivalent to the original.  The reason it is needed, is that
later in the series we move the immutable check into notify_change().
That would break the FAT_IOCTL_SET_ATTRIBUTES ioctl, as it needs to
perform the mode change regardless of the immutability of the file.

[Fix error if fat is built as a module.  Thanks to OGAWA Hirofumi for
noticing.]

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/fat/file.c       | 15 ++++++++++++++-
 security/security.c |  1 +
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/fs/fat/file.c b/fs/fat/file.c
index c672df4036e..8707a8cfa02 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -15,6 +15,8 @@
 #include <linux/writeback.h>
 #include <linux/backing-dev.h>
 #include <linux/blkdev.h>
+#include <linux/fsnotify.h>
+#include <linux/security.h>
 
 int fat_generic_ioctl(struct inode *inode, struct file *filp,
 		      unsigned int cmd, unsigned long arg)
@@ -64,6 +66,7 @@ int fat_generic_ioctl(struct inode *inode, struct file *filp,
 
 		/* Equivalent to a chmod() */
 		ia.ia_valid = ATTR_MODE | ATTR_CTIME;
+		ia.ia_ctime = current_fs_time(inode->i_sb);
 		if (is_dir) {
 			ia.ia_mode = MSDOS_MKMODE(attr,
 				S_IRWXUGO & ~sbi->options.fs_dmask)
@@ -90,11 +93,21 @@ int fat_generic_ioctl(struct inode *inode, struct file *filp,
 			}
 		}
 
+		/*
+		 * The security check is questionable...  We single
+		 * out the RO attribute for checking by the security
+		 * module, just because it maps to a file mode.
+		 */
+		err = security_inode_setattr(filp->f_path.dentry, &ia);
+		if (err)
+			goto up;
+
 		/* This MUST be done before doing anything irreversible... */
-		err = notify_change(filp->f_path.dentry, &ia);
+		err = fat_setattr(filp->f_path.dentry, &ia);
 		if (err)
 			goto up;
 
+		fsnotify_change(filp->f_path.dentry, ia.ia_valid);
 		if (sbi->options.sys_immutable) {
 			if (attr & ATTR_SYS)
 				inode->i_flags |= S_IMMUTABLE;
diff --git a/security/security.c b/security/security.c
index 78ed3ffde24..ff706872775 100644
--- a/security/security.c
+++ b/security/security.c
@@ -442,6 +442,7 @@ int security_inode_setattr(struct dentry *dentry, struct iattr *attr)
 		return 0;
 	return security_ops->inode_setattr(dentry, attr);
 }
+EXPORT_SYMBOL_GPL(security_inode_setattr);
 
 int security_inode_getattr(struct vfsmount *mnt, struct dentry *dentry)
 {
-- 
cgit v1.2.3


From beb29e058c35ab69e96e455a12ccf7505f6de425 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 1 Jul 2008 15:01:29 +0200
Subject: [patch 4/4] vfs: immutable inode checking cleanup

Move the immutable and append-only checks from chmod, chown and utimes
into notify_change().  Checks for immutable and append-only files are
always performed by the VFS and not by the filesystem (see
permission() and may_...() in namei.c), so these belong in
notify_change(), and not in inode_change_ok().

This should be completely equivalent.

CC: Ulrich Drepper <drepper@redhat.com>
CC: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/attr.c   |  5 +++++
 fs/open.c   | 24 ++----------------------
 fs/utimes.c |  4 ----
 3 files changed, 7 insertions(+), 26 deletions(-)

diff --git a/fs/attr.c b/fs/attr.c
index 765fc75fab3..26c71ba1eed 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -108,6 +108,11 @@ int notify_change(struct dentry * dentry, struct iattr * attr)
 	struct timespec now;
 	unsigned int ia_valid = attr->ia_valid;
 
+	if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_TIMES_SET)) {
+		if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+			return -EPERM;
+	}
+
 	now = current_fs_time(inode->i_sb);
 
 	attr->ia_ctime = now;
diff --git a/fs/open.c b/fs/open.c
index 3317e1909b2..3b3c43674be 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -588,9 +588,6 @@ asmlinkage long sys_fchmod(unsigned int fd, mode_t mode)
 	err = mnt_want_write(file->f_path.mnt);
 	if (err)
 		goto out_putf;
-	err = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		goto out_drop_write;
 	mutex_lock(&inode->i_mutex);
 	if (mode == (mode_t) -1)
 		mode = inode->i_mode;
@@ -598,8 +595,6 @@ asmlinkage long sys_fchmod(unsigned int fd, mode_t mode)
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
 	err = notify_change(dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
-
-out_drop_write:
 	mnt_drop_write(file->f_path.mnt);
 out_putf:
 	fput(file);
@@ -623,11 +618,6 @@ asmlinkage long sys_fchmodat(int dfd, const char __user *filename,
 	error = mnt_want_write(nd.path.mnt);
 	if (error)
 		goto dput_and_out;
-
-	error = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		goto out_drop_write;
-
 	mutex_lock(&inode->i_mutex);
 	if (mode == (mode_t) -1)
 		mode = inode->i_mode;
@@ -635,8 +625,6 @@ asmlinkage long sys_fchmodat(int dfd, const char __user *filename,
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
 	error = notify_change(nd.path.dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
-
-out_drop_write:
 	mnt_drop_write(nd.path.mnt);
 dput_and_out:
 	path_put(&nd.path);
@@ -651,18 +639,10 @@ asmlinkage long sys_chmod(const char __user *filename, mode_t mode)
 
 static int chown_common(struct dentry * dentry, uid_t user, gid_t group)
 {
-	struct inode * inode;
+	struct inode *inode = dentry->d_inode;
 	int error;
 	struct iattr newattrs;
 
-	error = -ENOENT;
-	if (!(inode = dentry->d_inode)) {
-		printk(KERN_ERR "chown_common: NULL inode\n");
-		goto out;
-	}
-	error = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-		goto out;
 	newattrs.ia_valid =  ATTR_CTIME;
 	if (user != (uid_t) -1) {
 		newattrs.ia_valid |= ATTR_UID;
@@ -678,7 +658,7 @@ static int chown_common(struct dentry * dentry, uid_t user, gid_t group)
 	mutex_lock(&inode->i_mutex);
 	error = notify_change(dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
-out:
+
 	return error;
 }
 
diff --git a/fs/utimes.c b/fs/utimes.c
index 8e09dbdfd7f..dad679d3a15 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -64,10 +64,6 @@ static int utimes_common(struct path *path, struct timespec *times)
 
 	newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME;
 	if (times) {
-		error = -EPERM;
-                if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
-			goto mnt_drop_write_and_out;
-
 		if (times[0].tv_nsec == UTIME_OMIT)
 			newattrs.ia_valid &= ~ATTR_ATIME;
 		else if (times[0].tv_nsec != UTIME_NOW) {
-- 
cgit v1.2.3


From e56b6a5dda1a36ffaa532df6f975ea324298fa4d Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 19 May 2008 07:53:34 +0200
Subject: Re: [PATCH 3/6] vfs: open_exec cleanup

On Mon, May 19, 2008 at 12:01:49AM +0200, Marcin Slusarz wrote:
> open_exec is needlessly indented, calls ERR_PTR with 0 argument
> (which is not valid errno) and jumps into middle of function
> just to return value.
> So clean it up a bit.

Still looks rather messy.  See below for a better version.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/exec.c | 58 ++++++++++++++++++++++++++++++----------------------------
 1 file changed, 30 insertions(+), 28 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 0ba5d355c5a..346e3f69c6e 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -656,38 +656,40 @@ EXPORT_SYMBOL(setup_arg_pages);
 struct file *open_exec(const char *name)
 {
 	struct nameidata nd;
-	int err;
 	struct file *file;
+	int err;
 
-	err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd, FMODE_READ|FMODE_EXEC);
-	file = ERR_PTR(err);
-
-	if (!err) {
-		struct inode *inode = nd.path.dentry->d_inode;
-		file = ERR_PTR(-EACCES);
-		if (S_ISREG(inode->i_mode)) {
-			int err = vfs_permission(&nd, MAY_EXEC | MAY_OPEN);
-			file = ERR_PTR(err);
-			if (!err) {
-				file = nameidata_to_filp(&nd,
-							O_RDONLY|O_LARGEFILE);
-				if (!IS_ERR(file)) {
-					err = deny_write_access(file);
-					if (err) {
-						fput(file);
-						file = ERR_PTR(err);
-					}
-				}
-out:
-				return file;
-			}
-		}
-		release_open_intent(&nd);
-		path_put(&nd.path);
+	err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd,
+				FMODE_READ|FMODE_EXEC);
+	if (err)
+		goto out;
+
+	err = -EACCES;
+	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
+		goto out_path_put;
+
+	err = vfs_permission(&nd, MAY_EXEC | MAY_OPEN);
+	if (err)
+		goto out_path_put;
+
+	file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
+	if (IS_ERR(file))
+		return file;
+
+	err = deny_write_access(file);
+	if (err) {
+		fput(file);
+		goto out;
 	}
-	goto out;
-}
 
+	return file;
+
+ out_path_put:
+	release_open_intent(&nd);
+	path_put(&nd.path);
+ out:
+	return ERR_PTR(err);
+}
 EXPORT_SYMBOL(open_exec);
 
 int kernel_read(struct file *file, unsigned long offset,
-- 
cgit v1.2.3


From 30524472c2f728c20d6bf35191042a5d455c0a64 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 22 Jul 2008 00:02:33 -0400
Subject: [PATCH] take noexec checks to very few callers that care

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/exec.c  |  7 +++++++
 fs/namei.c |  9 ---------
 fs/open.c  | 10 ++++++++++
 3 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 346e3f69c6e..eca58c29ede 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -118,6 +118,10 @@ asmlinkage long sys_uselib(const char __user * library)
 	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
 		goto exit;
 
+	error = -EACCES;
+	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
+		goto exit;
+
 	error = vfs_permission(&nd, MAY_READ | MAY_EXEC | MAY_OPEN);
 	if (error)
 		goto exit;
@@ -668,6 +672,9 @@ struct file *open_exec(const char *name)
 	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
 		goto out_path_put;
 
+	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
+		goto out_path_put;
+
 	err = vfs_permission(&nd, MAY_EXEC | MAY_OPEN);
 	if (err)
 		goto out_path_put;
diff --git a/fs/namei.c b/fs/namei.c
index 6d75430358a..396cb3e5c36 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -252,15 +252,6 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
 			return -EACCES;
 	}
 
-	if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode)) {
-		/*
-		 * MAY_EXEC on regular files is denied if the fs is mounted
-		 * with the "noexec" flag.
-		 */
-		if (mnt && (mnt->mnt_flags & MNT_NOEXEC))
-			return -EACCES;
-	}
-
 	/* Ordinary permission routines do not understand MAY_APPEND. */
 	if (inode->i_op && inode->i_op->permission) {
 		retval = inode->i_op->permission(inode, mask);
diff --git a/fs/open.c b/fs/open.c
index 3b3c43674be..d5e421ad0cf 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -461,6 +461,16 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 	if (res)
 		goto out;
 
+	if ((mode & MAY_EXEC) && S_ISREG(nd.path.dentry->d_inode->i_mode)) {
+		/*
+		 * MAY_EXEC on regular files is denied if the fs is mounted
+		 * with the "noexec" flag.
+		 */
+		res = -EACCES;
+		if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
+			goto out_path_release;
+	}
+
 	res = vfs_permission(&nd, mode | MAY_ACCESS);
 	/* SuS v2 requires we report a read only fs too */
 	if(res || !(mode & S_IWOTH) ||
-- 
cgit v1.2.3


From f419a2e3b64def707e1384ee38abb77f99af5f6d Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 22 Jul 2008 00:07:17 -0400
Subject: [PATCH] kill nameidata passing to permission(), rename to
 inode_permission()

Incidentally, the name that gives hundreds of false positives on grep
is not a good idea...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/ecryptfs/inode.c |  2 +-
 fs/namei.c          | 22 +++++++++-------------
 fs/nfsd/nfsfh.c     |  2 +-
 fs/nfsd/vfs.c       |  4 ++--
 fs/utimes.c         |  2 +-
 fs/xattr.c          |  2 +-
 include/linux/fs.h  |  2 +-
 ipc/mqueue.c        |  2 +-
 8 files changed, 17 insertions(+), 21 deletions(-)

diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index f25caf2b088..89209f00f9c 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -830,7 +830,7 @@ out:
 static int
 ecryptfs_permission(struct inode *inode, int mask)
 {
-	return permission(ecryptfs_inode_to_lower(inode), mask, NULL);
+	return inode_permission(ecryptfs_inode_to_lower(inode), mask);
 }
 
 /**
diff --git a/fs/namei.c b/fs/namei.c
index 396cb3e5c36..5029b93ebbd 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -227,13 +227,9 @@ int generic_permission(struct inode *inode, int mask,
 	return -EACCES;
 }
 
-int permission(struct inode *inode, int mask, struct nameidata *nd)
+int inode_permission(struct inode *inode, int mask)
 {
 	int retval;
-	struct vfsmount *mnt = NULL;
-
-	if (nd)
-		mnt = nd->path.mnt;
 
 	if (mask & MAY_WRITE) {
 		umode_t mode = inode->i_mode;
@@ -293,7 +289,7 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
  */
 int vfs_permission(struct nameidata *nd, int mask)
 {
-	return permission(nd->path.dentry->d_inode, mask, nd);
+	return inode_permission(nd->path.dentry->d_inode, mask);
 }
 
 /**
@@ -310,7 +306,7 @@ int vfs_permission(struct nameidata *nd, int mask)
  */
 int file_permission(struct file *file, int mask)
 {
-	return permission(file->f_path.dentry->d_inode, mask, NULL);
+	return inode_permission(file->f_path.dentry->d_inode, mask);
 }
 
 /*
@@ -1262,7 +1258,7 @@ static struct dentry *lookup_hash(struct nameidata *nd)
 {
 	int err;
 
-	err = permission(nd->path.dentry->d_inode, MAY_EXEC, nd);
+	err = inode_permission(nd->path.dentry->d_inode, MAY_EXEC);
 	if (err)
 		return ERR_PTR(err);
 	return __lookup_hash(&nd->last, nd->path.dentry, nd);
@@ -1310,7 +1306,7 @@ struct dentry *lookup_one_len(const char *name, struct dentry *base, int len)
 	if (err)
 		return ERR_PTR(err);
 
-	err = permission(base->d_inode, MAY_EXEC, NULL);
+	err = inode_permission(base->d_inode, MAY_EXEC);
 	if (err)
 		return ERR_PTR(err);
 	return __lookup_hash(&this, base, NULL);
@@ -1400,7 +1396,7 @@ static int may_delete(struct inode *dir,struct dentry *victim,int isdir)
 	BUG_ON(victim->d_parent->d_inode != dir);
 	audit_inode_child(victim->d_name.name, victim, dir);
 
-	error = permission(dir,MAY_WRITE | MAY_EXEC, NULL);
+	error = inode_permission(dir, MAY_WRITE | MAY_EXEC);
 	if (error)
 		return error;
 	if (IS_APPEND(dir))
@@ -1437,7 +1433,7 @@ static inline int may_create(struct inode *dir, struct dentry *child,
 		return -EEXIST;
 	if (IS_DEADDIR(dir))
 		return -ENOENT;
-	return permission(dir,MAY_WRITE | MAY_EXEC, nd);
+	return inode_permission(dir, MAY_WRITE | MAY_EXEC);
 }
 
 /* 
@@ -2543,7 +2539,7 @@ static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry,
 	 * we'll need to flip '..'.
 	 */
 	if (new_dir != old_dir) {
-		error = permission(old_dentry->d_inode, MAY_WRITE, NULL);
+		error = inode_permission(old_dentry->d_inode, MAY_WRITE);
 		if (error)
 			return error;
 	}
@@ -2897,7 +2893,7 @@ EXPORT_SYMBOL(page_symlink);
 EXPORT_SYMBOL(page_symlink_inode_operations);
 EXPORT_SYMBOL(path_lookup);
 EXPORT_SYMBOL(vfs_path_lookup);
-EXPORT_SYMBOL(permission);
+EXPORT_SYMBOL(inode_permission);
 EXPORT_SYMBOL(vfs_permission);
 EXPORT_SYMBOL(file_permission);
 EXPORT_SYMBOL(unlock_rename);
diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c
index f45451eb1e3..ea37c96f044 100644
--- a/fs/nfsd/nfsfh.c
+++ b/fs/nfsd/nfsfh.c
@@ -51,7 +51,7 @@ static int nfsd_acceptable(void *expv, struct dentry *dentry)
 		/* make sure parents give x permission to user */
 		int err;
 		parent = dget_parent(tdentry);
-		err = permission(parent->d_inode, MAY_EXEC, NULL);
+		err = inode_permission(parent->d_inode, MAY_EXEC);
 		if (err < 0) {
 			dput(parent);
 			break;
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index ad1ad59e374..18060bed526 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1953,12 +1953,12 @@ nfsd_permission(struct svc_rqst *rqstp, struct svc_export *exp,
 		return 0;
 
 	/* This assumes  NFSD_MAY_{READ,WRITE,EXEC} == MAY_{READ,WRITE,EXEC} */
-	err = permission(inode, acc & (MAY_READ|MAY_WRITE|MAY_EXEC), NULL);
+	err = inode_permission(inode, acc & (MAY_READ|MAY_WRITE|MAY_EXEC));
 
 	/* Allow read access to binaries even when mode 111 */
 	if (err == -EACCES && S_ISREG(inode->i_mode) &&
 	    acc == (NFSD_MAY_READ | NFSD_MAY_OWNER_OVERRIDE))
-		err = permission(inode, MAY_EXEC, NULL);
+		err = inode_permission(inode, MAY_EXEC);
 
 	return err? nfserrno(err) : 0;
 }
diff --git a/fs/utimes.c b/fs/utimes.c
index dad679d3a15..dc28b782625 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -96,7 +96,7 @@ static int utimes_common(struct path *path, struct timespec *times)
 			goto mnt_drop_write_and_out;
 
 		if (!is_owner_or_cap(inode)) {
-			error = permission(inode, MAY_WRITE, NULL);
+			error = inode_permission(inode, MAY_WRITE);
 			if (error)
 				goto mnt_drop_write_and_out;
 		}
diff --git a/fs/xattr.c b/fs/xattr.c
index 4706a8b1f49..b96222e05ba 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -63,7 +63,7 @@ xattr_permission(struct inode *inode, const char *name, int mask)
 			return -EPERM;
 	}
 
-	return permission(inode, mask, NULL);
+	return inode_permission(inode, mask);
 }
 
 int
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 527b9e482f9..9d2de4cadab 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1770,7 +1770,7 @@ extern int do_remount_sb(struct super_block *sb, int flags,
 extern sector_t bmap(struct inode *, sector_t);
 #endif
 extern int notify_change(struct dentry *, struct iattr *);
-extern int permission(struct inode *, int, struct nameidata *);
+extern int inode_permission(struct inode *, int);
 extern int generic_permission(struct inode *, int,
 		int (*check_acl)(struct inode *, int));
 
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 474984f9e03..96fb36cd987 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -638,7 +638,7 @@ static int oflag2acc[O_ACCMODE] = { MAY_READ, MAY_WRITE,
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (permission(dentry->d_inode, oflag2acc[oflag & O_ACCMODE], NULL)) {
+	if (inode_permission(dentry->d_inode, oflag2acc[oflag & O_ACCMODE])) {
 		dput(dentry);
 		mntput(mqueue_mnt);
 		return ERR_PTR(-EACCES);
-- 
cgit v1.2.3


From 256984a83880ff7ac78055cb87baea48137f0b77 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 22 Jul 2008 08:09:30 -0400
Subject: [PATCH] preparation to __user_walk_fd cleanup

Almost all users __user_walk_fd() and friends care only about struct path.
Get rid of the few that do not.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/inotify_user.c |  2 +-
 fs/open.c         | 18 ++++++++++--------
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/fs/inotify_user.c b/fs/inotify_user.c
index fe79c25d95d..9b99ebf2888 100644
--- a/fs/inotify_user.c
+++ b/fs/inotify_user.c
@@ -365,7 +365,7 @@ static int find_inode(const char __user *dirname, struct nameidata *nd,
 	if (error)
 		return error;
 	/* you can only watch an inode if you have read permissions on it */
-	error = vfs_permission(nd, MAY_READ);
+	error = inode_permission(nd->path.dentry->d_inode, MAY_READ);
 	if (error)
 		path_put(&nd->path);
 	return error;
diff --git a/fs/open.c b/fs/open.c
index d5e421ad0cf..e94266700ed 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -251,7 +251,7 @@ static long do_sys_truncate(const char __user * path, loff_t length)
 	if (error)
 		goto dput_and_out;
 
-	error = vfs_permission(&nd, MAY_WRITE);
+	error = inode_permission(inode, MAY_WRITE);
 	if (error)
 		goto mnt_drop_write_and_out;
 
@@ -426,6 +426,7 @@ out:
 asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 {
 	struct nameidata nd;
+	struct inode *inode;
 	int old_fsuid, old_fsgid;
 	kernel_cap_t uninitialized_var(old_cap);  /* !SECURE_NO_SETUID_FIXUP */
 	int res;
@@ -461,7 +462,9 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 	if (res)
 		goto out;
 
-	if ((mode & MAY_EXEC) && S_ISREG(nd.path.dentry->d_inode->i_mode)) {
+	inode = nd.path.dentry->d_inode;
+
+	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		/*
 		 * MAY_EXEC on regular files is denied if the fs is mounted
 		 * with the "noexec" flag.
@@ -471,10 +474,9 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 			goto out_path_release;
 	}
 
-	res = vfs_permission(&nd, mode | MAY_ACCESS);
+	res = inode_permission(inode, mode | MAY_ACCESS);
 	/* SuS v2 requires we report a read only fs too */
-	if(res || !(mode & S_IWOTH) ||
-	   special_file(nd.path.dentry->d_inode->i_mode))
+	if (res || !(mode & S_IWOTH) || special_file(inode->i_mode))
 		goto out_path_release;
 	/*
 	 * This is a rare case where using __mnt_is_readonly()
@@ -515,7 +517,7 @@ asmlinkage long sys_chdir(const char __user * filename)
 	if (error)
 		goto out;
 
-	error = vfs_permission(&nd, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
 	if (error)
 		goto dput_and_out;
 
@@ -544,7 +546,7 @@ asmlinkage long sys_fchdir(unsigned int fd)
 	if (!S_ISDIR(inode->i_mode))
 		goto out_putf;
 
-	error = file_permission(file, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(inode, MAY_EXEC | MAY_ACCESS);
 	if (!error)
 		set_fs_pwd(current->fs, &file->f_path);
 out_putf:
@@ -562,7 +564,7 @@ asmlinkage long sys_chroot(const char __user * filename)
 	if (error)
 		goto out;
 
-	error = vfs_permission(&nd, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
 	if (error)
 		goto dput_and_out;
 
-- 
cgit v1.2.3


From 2d8f30380ab8c706f4e0a8f1aaa22b5886e9ac8a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 22 Jul 2008 09:59:21 -0400
Subject: [PATCH] sanitize __user_walk_fd() et.al.

* do not pass nameidata; struct path is all the callers want.
* switch to new helpers:
	user_path_at(dfd, pathname, flags, &path)
	user_path(pathname, &path)
	user_lpath(pathname, &path)
	user_path_dir(pathname, &path)  (fail if not a directory)
  The last 3 are trivial macro wrappers for the first one.
* remove nameidata in callers.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 arch/alpha/kernel/osf_sys.c  |  10 ++--
 arch/parisc/hpux/sys_hpux.c  |  10 ++--
 fs/coda/pioctl.c             |  14 ++---
 fs/compat.c                  |  20 +++----
 fs/inotify_user.c            |  22 ++++----
 fs/namei.c                   |  36 ++++++-------
 fs/namespace.c               |  74 +++++++++++++-------------
 fs/open.c                    | 124 +++++++++++++++++++++----------------------
 fs/stat.c                    |  32 +++++------
 fs/utimes.c                  |   8 +--
 fs/xattr.c                   |  96 ++++++++++++++++-----------------
 fs/xfs/linux-2.6/xfs_ioctl.c |  14 +++--
 include/linux/namei.h        |  13 ++---
 13 files changed, 235 insertions(+), 238 deletions(-)

diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 32ca1b92730..6e943135f0e 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -253,15 +253,15 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
 }
 
 asmlinkage int
-osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz)
+osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz)
 {
-	struct nameidata nd;
+	struct path path;
 	int retval;
 
-	retval = user_path_walk(path, &nd);
+	retval = user_path(pathname, &path);
 	if (!retval) {
-		retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz);
-		path_put(&nd.path);
+		retval = do_osf_statfs(path.dentry, buffer, bufsiz);
+		path_put(&path);
 	}
 	return retval;
 }
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index be255ebb609..18072e03a01 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -210,19 +210,19 @@ static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf)
 }
 
 /* hpux statfs */
-asmlinkage long hpux_statfs(const char __user *path,
+asmlinkage long hpux_statfs(const char __user *pathname,
 						struct hpux_statfs __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct hpux_statfs tmp;
-		error = vfs_statfs_hpux(nd.path.dentry, &tmp);
+		error = vfs_statfs_hpux(path.dentry, &tmp);
 		if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
 			error = -EFAULT;
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
diff --git a/fs/coda/pioctl.c b/fs/coda/pioctl.c
index c38a98974fb..c51365422aa 100644
--- a/fs/coda/pioctl.c
+++ b/fs/coda/pioctl.c
@@ -49,7 +49,7 @@ static int coda_ioctl_permission(struct inode *inode, int mask)
 static int coda_pioctl(struct inode * inode, struct file * filp, 
                        unsigned int cmd, unsigned long user_data)
 {
-	struct nameidata nd;
+	struct path path;
         int error;
 	struct PioctlData data;
         struct inode *target_inode = NULL;
@@ -64,21 +64,21 @@ static int coda_pioctl(struct inode * inode, struct file * filp,
          * Look up the pathname. Note that the pathname is in 
          * user memory, and namei takes care of this
          */
-        if ( data.follow ) {
-                error = user_path_walk(data.path, &nd);
+        if (data.follow) {
+                error = user_path(data.path, &path);
 	} else {
-	        error = user_path_walk_link(data.path, &nd);
+	        error = user_lpath(data.path, &path);
 	}
 		
 	if ( error ) {
 		return error;
         } else {
-		target_inode = nd.path.dentry->d_inode;
+		target_inode = path.dentry->d_inode;
 	}
 	
 	/* return if it is not a Coda inode */
 	if ( target_inode->i_sb != inode->i_sb ) {
-		path_put(&nd.path);
+		path_put(&path);
 	        return  -EINVAL;
 	}
 
@@ -87,7 +87,7 @@ static int coda_pioctl(struct inode * inode, struct file * filp,
 
 	error = venus_pioctl(inode->i_sb, &(cnp->c_fid), cmd, &data);
 
-	path_put(&nd.path);
+	path_put(&path);
         return error;
 }
 
diff --git a/fs/compat.c b/fs/compat.c
index 106eba28ec5..c9d1472e65c 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -234,18 +234,18 @@ static int put_compat_statfs(struct compat_statfs __user *ubuf, struct kstatfs *
  * The following statfs calls are copies of code from fs/open.c and
  * should be checked against those from time to time
  */
-asmlinkage long compat_sys_statfs(const char __user *path, struct compat_statfs __user *buf)
+asmlinkage long compat_sys_statfs(const char __user *pathname, struct compat_statfs __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct kstatfs tmp;
-		error = vfs_statfs(nd.path.dentry, &tmp);
+		error = vfs_statfs(path.dentry, &tmp);
 		if (!error)
 			error = put_compat_statfs(buf, &tmp);
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
@@ -299,21 +299,21 @@ static int put_compat_statfs64(struct compat_statfs64 __user *ubuf, struct kstat
 	return 0;
 }
 
-asmlinkage long compat_sys_statfs64(const char __user *path, compat_size_t sz, struct compat_statfs64 __user *buf)
+asmlinkage long compat_sys_statfs64(const char __user *pathname, compat_size_t sz, struct compat_statfs64 __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
 	if (sz != sizeof(*buf))
 		return -EINVAL;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct kstatfs tmp;
-		error = vfs_statfs(nd.path.dentry, &tmp);
+		error = vfs_statfs(path.dentry, &tmp);
 		if (!error)
 			error = put_compat_statfs64(buf, &tmp);
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
diff --git a/fs/inotify_user.c b/fs/inotify_user.c
index 9b99ebf2888..60249429a25 100644
--- a/fs/inotify_user.c
+++ b/fs/inotify_user.c
@@ -354,20 +354,20 @@ static void inotify_dev_event_dequeue(struct inotify_device *dev)
 }
 
 /*
- * find_inode - resolve a user-given path to a specific inode and return a nd
+ * find_inode - resolve a user-given path to a specific inode
  */
-static int find_inode(const char __user *dirname, struct nameidata *nd,
+static int find_inode(const char __user *dirname, struct path *path,
 		      unsigned flags)
 {
 	int error;
 
-	error = __user_walk(dirname, flags, nd);
+	error = user_path_at(AT_FDCWD, dirname, flags, path);
 	if (error)
 		return error;
 	/* you can only watch an inode if you have read permissions on it */
-	error = inode_permission(nd->path.dentry->d_inode, MAY_READ);
+	error = inode_permission(path->dentry->d_inode, MAY_READ);
 	if (error)
-		path_put(&nd->path);
+		path_put(path);
 	return error;
 }
 
@@ -650,11 +650,11 @@ asmlinkage long sys_inotify_init(void)
 	return sys_inotify_init1(0);
 }
 
-asmlinkage long sys_inotify_add_watch(int fd, const char __user *path, u32 mask)
+asmlinkage long sys_inotify_add_watch(int fd, const char __user *pathname, u32 mask)
 {
 	struct inode *inode;
 	struct inotify_device *dev;
-	struct nameidata nd;
+	struct path path;
 	struct file *filp;
 	int ret, fput_needed;
 	unsigned flags = 0;
@@ -674,12 +674,12 @@ asmlinkage long sys_inotify_add_watch(int fd, const char __user *path, u32 mask)
 	if (mask & IN_ONLYDIR)
 		flags |= LOOKUP_DIRECTORY;
 
-	ret = find_inode(path, &nd, flags);
+	ret = find_inode(pathname, &path, flags);
 	if (unlikely(ret))
 		goto fput_and_out;
 
-	/* inode held in place by reference to nd; dev by fget on fd */
-	inode = nd.path.dentry->d_inode;
+	/* inode held in place by reference to path; dev by fget on fd */
+	inode = path.dentry->d_inode;
 	dev = filp->private_data;
 
 	mutex_lock(&dev->up_mutex);
@@ -688,7 +688,7 @@ asmlinkage long sys_inotify_add_watch(int fd, const char __user *path, u32 mask)
 		ret = create_watch(dev, inode, mask);
 	mutex_unlock(&dev->up_mutex);
 
-	path_put(&nd.path);
+	path_put(&path);
 fput_and_out:
 	fput_light(filp, fput_needed);
 	return ret;
diff --git a/fs/namei.c b/fs/namei.c
index 5029b93ebbd..edb5e973f9b 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1334,24 +1334,24 @@ struct dentry *lookup_one_noperm(const char *name, struct dentry *base)
 	return __lookup_hash(&this, base, NULL);
 }
 
-int __user_walk_fd(int dfd, const char __user *name, unsigned flags,
-			    struct nameidata *nd)
+int user_path_at(int dfd, const char __user *name, unsigned flags,
+		 struct path *path)
 {
+	struct nameidata nd;
 	char *tmp = getname(name);
 	int err = PTR_ERR(tmp);
-
 	if (!IS_ERR(tmp)) {
-		err = do_path_lookup(dfd, tmp, flags, nd);
+
+		BUG_ON(flags & LOOKUP_PARENT);
+
+		err = do_path_lookup(dfd, tmp, flags, &nd);
 		putname(tmp);
+		if (!err)
+			*path = nd.path;
 	}
 	return err;
 }
 
-int __user_walk(const char __user *name, unsigned flags, struct nameidata *nd)
-{
-	return __user_walk_fd(AT_FDCWD, name, flags, nd);
-}
-
 /*
  * It's inline, so penalty for filesystems that don't use sticky bit is
  * minimal.
@@ -2446,7 +2446,8 @@ asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
 			   int flags)
 {
 	struct dentry *new_dentry;
-	struct nameidata nd, old_nd;
+	struct nameidata nd;
+	struct path old_path;
 	int error;
 	char * to;
 
@@ -2457,16 +2458,16 @@ asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
 	if (IS_ERR(to))
 		return PTR_ERR(to);
 
-	error = __user_walk_fd(olddfd, oldname,
-			       flags & AT_SYMLINK_FOLLOW ? LOOKUP_FOLLOW : 0,
-			       &old_nd);
+	error = user_path_at(olddfd, oldname,
+			     flags & AT_SYMLINK_FOLLOW ? LOOKUP_FOLLOW : 0,
+			     &old_path);
 	if (error)
 		goto exit;
 	error = do_path_lookup(newdfd, to, LOOKUP_PARENT, &nd);
 	if (error)
 		goto out;
 	error = -EXDEV;
-	if (old_nd.path.mnt != nd.path.mnt)
+	if (old_path.mnt != nd.path.mnt)
 		goto out_release;
 	new_dentry = lookup_create(&nd, 0);
 	error = PTR_ERR(new_dentry);
@@ -2475,7 +2476,7 @@ asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
 	error = mnt_want_write(nd.path.mnt);
 	if (error)
 		goto out_dput;
-	error = vfs_link(old_nd.path.dentry, nd.path.dentry->d_inode, new_dentry);
+	error = vfs_link(old_path.dentry, nd.path.dentry->d_inode, new_dentry);
 	mnt_drop_write(nd.path.mnt);
 out_dput:
 	dput(new_dentry);
@@ -2484,7 +2485,7 @@ out_unlock:
 out_release:
 	path_put(&nd.path);
 out:
-	path_put(&old_nd.path);
+	path_put(&old_path);
 exit:
 	putname(to);
 
@@ -2877,8 +2878,7 @@ const struct inode_operations page_symlink_inode_operations = {
 	.put_link	= page_put_link,
 };
 
-EXPORT_SYMBOL(__user_walk);
-EXPORT_SYMBOL(__user_walk_fd);
+EXPORT_SYMBOL(user_path_at);
 EXPORT_SYMBOL(follow_down);
 EXPORT_SYMBOL(follow_up);
 EXPORT_SYMBOL(get_write_access); /* binfmt_aout */
diff --git a/fs/namespace.c b/fs/namespace.c
index 26380f59953..411728c0c8b 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1130,27 +1130,27 @@ static int do_umount(struct vfsmount *mnt, int flags)
 
 asmlinkage long sys_umount(char __user * name, int flags)
 {
-	struct nameidata nd;
+	struct path path;
 	int retval;
 
-	retval = __user_walk(name, LOOKUP_FOLLOW, &nd);
+	retval = user_path(name, &path);
 	if (retval)
 		goto out;
 	retval = -EINVAL;
-	if (nd.path.dentry != nd.path.mnt->mnt_root)
+	if (path.dentry != path.mnt->mnt_root)
 		goto dput_and_out;
-	if (!check_mnt(nd.path.mnt))
+	if (!check_mnt(path.mnt))
 		goto dput_and_out;
 
 	retval = -EPERM;
 	if (!capable(CAP_SYS_ADMIN))
 		goto dput_and_out;
 
-	retval = do_umount(nd.path.mnt, flags);
+	retval = do_umount(path.mnt, flags);
 dput_and_out:
 	/* we mustn't call path_put() as that would clear mnt_expiry_mark */
-	dput(nd.path.dentry);
-	mntput_no_expire(nd.path.mnt);
+	dput(path.dentry);
+	mntput_no_expire(path.mnt);
 out:
 	return retval;
 }
@@ -2179,28 +2179,26 @@ asmlinkage long sys_pivot_root(const char __user * new_root,
 			       const char __user * put_old)
 {
 	struct vfsmount *tmp;
-	struct nameidata new_nd, old_nd;
-	struct path parent_path, root_parent, root;
+	struct path new, old, parent_path, root_parent, root;
 	int error;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	error = __user_walk(new_root, LOOKUP_FOLLOW | LOOKUP_DIRECTORY,
-			    &new_nd);
+	error = user_path_dir(new_root, &new);
 	if (error)
 		goto out0;
 	error = -EINVAL;
-	if (!check_mnt(new_nd.path.mnt))
+	if (!check_mnt(new.mnt))
 		goto out1;
 
-	error = __user_walk(put_old, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, &old_nd);
+	error = user_path_dir(put_old, &old);
 	if (error)
 		goto out1;
 
-	error = security_sb_pivotroot(&old_nd.path, &new_nd.path);
+	error = security_sb_pivotroot(&old, &new);
 	if (error) {
-		path_put(&old_nd.path);
+		path_put(&old);
 		goto out1;
 	}
 
@@ -2209,69 +2207,69 @@ asmlinkage long sys_pivot_root(const char __user * new_root,
 	path_get(&current->fs->root);
 	read_unlock(&current->fs->lock);
 	down_write(&namespace_sem);
-	mutex_lock(&old_nd.path.dentry->d_inode->i_mutex);
+	mutex_lock(&old.dentry->d_inode->i_mutex);
 	error = -EINVAL;
-	if (IS_MNT_SHARED(old_nd.path.mnt) ||
-		IS_MNT_SHARED(new_nd.path.mnt->mnt_parent) ||
+	if (IS_MNT_SHARED(old.mnt) ||
+		IS_MNT_SHARED(new.mnt->mnt_parent) ||
 		IS_MNT_SHARED(root.mnt->mnt_parent))
 		goto out2;
 	if (!check_mnt(root.mnt))
 		goto out2;
 	error = -ENOENT;
-	if (IS_DEADDIR(new_nd.path.dentry->d_inode))
+	if (IS_DEADDIR(new.dentry->d_inode))
 		goto out2;
-	if (d_unhashed(new_nd.path.dentry) && !IS_ROOT(new_nd.path.dentry))
+	if (d_unhashed(new.dentry) && !IS_ROOT(new.dentry))
 		goto out2;
-	if (d_unhashed(old_nd.path.dentry) && !IS_ROOT(old_nd.path.dentry))
+	if (d_unhashed(old.dentry) && !IS_ROOT(old.dentry))
 		goto out2;
 	error = -EBUSY;
-	if (new_nd.path.mnt == root.mnt ||
-	    old_nd.path.mnt == root.mnt)
+	if (new.mnt == root.mnt ||
+	    old.mnt == root.mnt)
 		goto out2; /* loop, on the same file system  */
 	error = -EINVAL;
 	if (root.mnt->mnt_root != root.dentry)
 		goto out2; /* not a mountpoint */
 	if (root.mnt->mnt_parent == root.mnt)
 		goto out2; /* not attached */
-	if (new_nd.path.mnt->mnt_root != new_nd.path.dentry)
+	if (new.mnt->mnt_root != new.dentry)
 		goto out2; /* not a mountpoint */
-	if (new_nd.path.mnt->mnt_parent == new_nd.path.mnt)
+	if (new.mnt->mnt_parent == new.mnt)
 		goto out2; /* not attached */
 	/* make sure we can reach put_old from new_root */
-	tmp = old_nd.path.mnt;
+	tmp = old.mnt;
 	spin_lock(&vfsmount_lock);
-	if (tmp != new_nd.path.mnt) {
+	if (tmp != new.mnt) {
 		for (;;) {
 			if (tmp->mnt_parent == tmp)
 				goto out3; /* already mounted on put_old */
-			if (tmp->mnt_parent == new_nd.path.mnt)
+			if (tmp->mnt_parent == new.mnt)
 				break;
 			tmp = tmp->mnt_parent;
 		}
-		if (!is_subdir(tmp->mnt_mountpoint, new_nd.path.dentry))
+		if (!is_subdir(tmp->mnt_mountpoint, new.dentry))
 			goto out3;
-	} else if (!is_subdir(old_nd.path.dentry, new_nd.path.dentry))
+	} else if (!is_subdir(old.dentry, new.dentry))
 		goto out3;
-	detach_mnt(new_nd.path.mnt, &parent_path);
+	detach_mnt(new.mnt, &parent_path);
 	detach_mnt(root.mnt, &root_parent);
 	/* mount old root on put_old */
-	attach_mnt(root.mnt, &old_nd.path);
+	attach_mnt(root.mnt, &old);
 	/* mount new_root on / */
-	attach_mnt(new_nd.path.mnt, &root_parent);
+	attach_mnt(new.mnt, &root_parent);
 	touch_mnt_namespace(current->nsproxy->mnt_ns);
 	spin_unlock(&vfsmount_lock);
-	chroot_fs_refs(&root, &new_nd.path);
-	security_sb_post_pivotroot(&root, &new_nd.path);
+	chroot_fs_refs(&root, &new);
+	security_sb_post_pivotroot(&root, &new);
 	error = 0;
 	path_put(&root_parent);
 	path_put(&parent_path);
 out2:
-	mutex_unlock(&old_nd.path.dentry->d_inode->i_mutex);
+	mutex_unlock(&old.dentry->d_inode->i_mutex);
 	up_write(&namespace_sem);
 	path_put(&root);
-	path_put(&old_nd.path);
+	path_put(&old);
 out1:
-	path_put(&new_nd.path);
+	path_put(&new);
 out0:
 	return error;
 out3:
diff --git a/fs/open.c b/fs/open.c
index e94266700ed..3fe1a6857c7 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -122,37 +122,37 @@ static int vfs_statfs64(struct dentry *dentry, struct statfs64 *buf)
 	return 0;
 }
 
-asmlinkage long sys_statfs(const char __user * path, struct statfs __user * buf)
+asmlinkage long sys_statfs(const char __user *pathname, struct statfs __user * buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct statfs tmp;
-		error = vfs_statfs_native(nd.path.dentry, &tmp);
+		error = vfs_statfs_native(path.dentry, &tmp);
 		if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
 			error = -EFAULT;
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
 
 
-asmlinkage long sys_statfs64(const char __user *path, size_t sz, struct statfs64 __user *buf)
+asmlinkage long sys_statfs64(const char __user *pathname, size_t sz, struct statfs64 __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	long error;
 
 	if (sz != sizeof(*buf))
 		return -EINVAL;
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct statfs64 tmp;
-		error = vfs_statfs64(nd.path.dentry, &tmp);
+		error = vfs_statfs64(path.dentry, &tmp);
 		if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
 			error = -EFAULT;
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
@@ -223,20 +223,20 @@ int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs,
 	return err;
 }
 
-static long do_sys_truncate(const char __user * path, loff_t length)
+static long do_sys_truncate(const char __user *pathname, loff_t length)
 {
-	struct nameidata nd;
-	struct inode * inode;
+	struct path path;
+	struct inode *inode;
 	int error;
 
 	error = -EINVAL;
 	if (length < 0)	/* sorry, but loff_t says... */
 		goto out;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		goto out;
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 
 	/* For directories it's -EISDIR, for other non-regulars - -EINVAL */
 	error = -EISDIR;
@@ -247,7 +247,7 @@ static long do_sys_truncate(const char __user * path, loff_t length)
 	if (!S_ISREG(inode->i_mode))
 		goto dput_and_out;
 
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto dput_and_out;
 
@@ -274,15 +274,15 @@ static long do_sys_truncate(const char __user * path, loff_t length)
 	error = locks_verify_truncate(inode, NULL, length);
 	if (!error) {
 		DQUOT_INIT(inode);
-		error = do_truncate(nd.path.dentry, length, 0, NULL);
+		error = do_truncate(path.dentry, length, 0, NULL);
 	}
 
 put_write_and_out:
 	put_write_access(inode);
 mnt_drop_write_and_out:
-	mnt_drop_write(nd.path.mnt);
+	mnt_drop_write(path.mnt);
 dput_and_out:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -425,7 +425,7 @@ out:
  */
 asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 {
-	struct nameidata nd;
+	struct path path;
 	struct inode *inode;
 	int old_fsuid, old_fsgid;
 	kernel_cap_t uninitialized_var(old_cap);  /* !SECURE_NO_SETUID_FIXUP */
@@ -449,7 +449,7 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 		 * FIXME: There is a race here against sys_capset.  The
 		 * capabilities can change yet we will restore the old
 		 * value below.  We should hold task_capabilities_lock,
-		 * but we cannot because user_path_walk can sleep.
+		 * but we cannot because user_path_at can sleep.
 		 */
 #endif /* ndef CONFIG_SECURITY_FILE_CAPABILITIES */
 		if (current->uid)
@@ -458,11 +458,11 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 			old_cap = cap_set_effective(current->cap_permitted);
 	}
 
-	res = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW, &nd);
+	res = user_path_at(dfd, filename, LOOKUP_FOLLOW, &path);
 	if (res)
 		goto out;
 
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 
 	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		/*
@@ -470,7 +470,7 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 		 * with the "noexec" flag.
 		 */
 		res = -EACCES;
-		if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
+		if (path.mnt->mnt_flags & MNT_NOEXEC)
 			goto out_path_release;
 	}
 
@@ -488,11 +488,11 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
 	 * inherently racy and know that the fs may change
 	 * state before we even see this result.
 	 */
-	if (__mnt_is_readonly(nd.path.mnt))
+	if (__mnt_is_readonly(path.mnt))
 		res = -EROFS;
 
 out_path_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	current->fsuid = old_fsuid;
 	current->fsgid = old_fsgid;
@@ -510,21 +510,21 @@ asmlinkage long sys_access(const char __user *filename, int mode)
 
 asmlinkage long sys_chdir(const char __user * filename)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = __user_walk(filename, LOOKUP_FOLLOW|LOOKUP_DIRECTORY, &nd);
+	error = user_path_dir(filename, &path);
 	if (error)
 		goto out;
 
-	error = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
 	if (error)
 		goto dput_and_out;
 
-	set_fs_pwd(current->fs, &nd.path);
+	set_fs_pwd(current->fs, &path);
 
 dput_and_out:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -557,14 +557,14 @@ out:
 
 asmlinkage long sys_chroot(const char __user * filename)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = __user_walk(filename, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, &nd);
+	error = user_path_dir(filename, &path);
 	if (error)
 		goto out;
 
-	error = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
+	error = inode_permission(path.dentry->d_inode, MAY_EXEC | MAY_ACCESS);
 	if (error)
 		goto dput_and_out;
 
@@ -572,10 +572,10 @@ asmlinkage long sys_chroot(const char __user * filename)
 	if (!capable(CAP_SYS_CHROOT))
 		goto dput_and_out;
 
-	set_fs_root(current->fs, &nd.path);
+	set_fs_root(current->fs, &path);
 	error = 0;
 dput_and_out:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -617,17 +617,17 @@ out:
 asmlinkage long sys_fchmodat(int dfd, const char __user *filename,
 			     mode_t mode)
 {
-	struct nameidata nd;
-	struct inode * inode;
+	struct path path;
+	struct inode *inode;
 	int error;
 	struct iattr newattrs;
 
-	error = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW, &nd);
+	error = user_path_at(dfd, filename, LOOKUP_FOLLOW, &path);
 	if (error)
 		goto out;
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto dput_and_out;
 	mutex_lock(&inode->i_mutex);
@@ -635,11 +635,11 @@ asmlinkage long sys_fchmodat(int dfd, const char __user *filename,
 		mode = inode->i_mode;
 	newattrs.ia_mode = (mode & S_IALLUGO) | (inode->i_mode & ~S_IALLUGO);
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
-	error = notify_change(nd.path.dentry, &newattrs);
+	error = notify_change(path.dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
-	mnt_drop_write(nd.path.mnt);
+	mnt_drop_write(path.mnt);
 dput_and_out:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -676,19 +676,19 @@ static int chown_common(struct dentry * dentry, uid_t user, gid_t group)
 
 asmlinkage long sys_chown(const char __user * filename, uid_t user, gid_t group)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(filename, &nd);
+	error = user_path(filename, &path);
 	if (error)
 		goto out;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto out_release;
-	error = chown_common(nd.path.dentry, user, group);
-	mnt_drop_write(nd.path.mnt);
+	error = chown_common(path.dentry, user, group);
+	mnt_drop_write(path.mnt);
 out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
@@ -696,7 +696,7 @@ out:
 asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
 			     gid_t group, int flag)
 {
-	struct nameidata nd;
+	struct path path;
 	int error = -EINVAL;
 	int follow;
 
@@ -704,35 +704,35 @@ asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
 		goto out;
 
 	follow = (flag & AT_SYMLINK_NOFOLLOW) ? 0 : LOOKUP_FOLLOW;
-	error = __user_walk_fd(dfd, filename, follow, &nd);
+	error = user_path_at(dfd, filename, follow, &path);
 	if (error)
 		goto out;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto out_release;
-	error = chown_common(nd.path.dentry, user, group);
-	mnt_drop_write(nd.path.mnt);
+	error = chown_common(path.dentry, user, group);
+	mnt_drop_write(path.mnt);
 out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
 
 asmlinkage long sys_lchown(const char __user * filename, uid_t user, gid_t group)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk_link(filename, &nd);
+	error = user_lpath(filename, &path);
 	if (error)
 		goto out;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (error)
 		goto out_release;
-	error = chown_common(nd.path.dentry, user, group);
-	mnt_drop_write(nd.path.mnt);
+	error = chown_common(path.dentry, user, group);
+	mnt_drop_write(path.mnt);
 out_release:
-	path_put(&nd.path);
+	path_put(&path);
 out:
 	return error;
 }
diff --git a/fs/stat.c b/fs/stat.c
index 9cf41f719d5..7c46fbeb8b7 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -57,13 +57,13 @@ EXPORT_SYMBOL(vfs_getattr);
 
 int vfs_stat_fd(int dfd, char __user *name, struct kstat *stat)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = __user_walk_fd(dfd, name, LOOKUP_FOLLOW, &nd);
+	error = user_path_at(dfd, name, LOOKUP_FOLLOW, &path);
 	if (!error) {
-		error = vfs_getattr(nd.path.mnt, nd.path.dentry, stat);
-		path_put(&nd.path);
+		error = vfs_getattr(path.mnt, path.dentry, stat);
+		path_put(&path);
 	}
 	return error;
 }
@@ -77,13 +77,13 @@ EXPORT_SYMBOL(vfs_stat);
 
 int vfs_lstat_fd(int dfd, char __user *name, struct kstat *stat)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = __user_walk_fd(dfd, name, 0, &nd);
+	error = user_path_at(dfd, name, 0, &path);
 	if (!error) {
-		error = vfs_getattr(nd.path.mnt, nd.path.dentry, stat);
-		path_put(&nd.path);
+		error = vfs_getattr(path.mnt, path.dentry, stat);
+		path_put(&path);
 	}
 	return error;
 }
@@ -291,29 +291,29 @@ asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf)
 	return error;
 }
 
-asmlinkage long sys_readlinkat(int dfd, const char __user *path,
+asmlinkage long sys_readlinkat(int dfd, const char __user *pathname,
 				char __user *buf, int bufsiz)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
 	if (bufsiz <= 0)
 		return -EINVAL;
 
-	error = __user_walk_fd(dfd, path, 0, &nd);
+	error = user_path_at(dfd, pathname, 0, &path);
 	if (!error) {
-		struct inode *inode = nd.path.dentry->d_inode;
+		struct inode *inode = path.dentry->d_inode;
 
 		error = -EINVAL;
 		if (inode->i_op && inode->i_op->readlink) {
-			error = security_inode_readlink(nd.path.dentry);
+			error = security_inode_readlink(path.dentry);
 			if (!error) {
-				touch_atime(nd.path.mnt, nd.path.dentry);
-				error = inode->i_op->readlink(nd.path.dentry,
+				touch_atime(path.mnt, path.dentry);
+				error = inode->i_op->readlink(path.dentry,
 							      buf, bufsiz);
 			}
 		}
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
diff --git a/fs/utimes.c b/fs/utimes.c
index dc28b782625..6929e3e91d0 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -152,18 +152,18 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags
 		error = utimes_common(&file->f_path, times);
 		fput(file);
 	} else {
-		struct nameidata nd;
+		struct path path;
 		int lookup_flags = 0;
 
 		if (!(flags & AT_SYMLINK_NOFOLLOW))
 			lookup_flags |= LOOKUP_FOLLOW;
 
-		error = __user_walk_fd(dfd, filename, lookup_flags, &nd);
+		error = user_path_at(dfd, filename, lookup_flags, &path);
 		if (error)
 			goto out;
 
-		error = utimes_common(&nd.path, times);
-		path_put(&nd.path);
+		error = utimes_common(&path, times);
+		path_put(&path);
 	}
 
 out:
diff --git a/fs/xattr.c b/fs/xattr.c
index b96222e05ba..468377e6653 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -252,40 +252,40 @@ setxattr(struct dentry *d, const char __user *name, const void __user *value,
 }
 
 asmlinkage long
-sys_setxattr(const char __user *path, const char __user *name,
+sys_setxattr(const char __user *pathname, const char __user *name,
 	     const void __user *value, size_t size, int flags)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		return error;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (!error) {
-		error = setxattr(nd.path.dentry, name, value, size, flags);
-		mnt_drop_write(nd.path.mnt);
+		error = setxattr(path.dentry, name, value, size, flags);
+		mnt_drop_write(path.mnt);
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return error;
 }
 
 asmlinkage long
-sys_lsetxattr(const char __user *path, const char __user *name,
+sys_lsetxattr(const char __user *pathname, const char __user *name,
 	      const void __user *value, size_t size, int flags)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk_link(path, &nd);
+	error = user_lpath(pathname, &path);
 	if (error)
 		return error;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (!error) {
-		error = setxattr(nd.path.dentry, name, value, size, flags);
-		mnt_drop_write(nd.path.mnt);
+		error = setxattr(path.dentry, name, value, size, flags);
+		mnt_drop_write(path.mnt);
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return error;
 }
 
@@ -350,32 +350,32 @@ getxattr(struct dentry *d, const char __user *name, void __user *value,
 }
 
 asmlinkage ssize_t
-sys_getxattr(const char __user *path, const char __user *name,
+sys_getxattr(const char __user *pathname, const char __user *name,
 	     void __user *value, size_t size)
 {
-	struct nameidata nd;
+	struct path path;
 	ssize_t error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		return error;
-	error = getxattr(nd.path.dentry, name, value, size);
-	path_put(&nd.path);
+	error = getxattr(path.dentry, name, value, size);
+	path_put(&path);
 	return error;
 }
 
 asmlinkage ssize_t
-sys_lgetxattr(const char __user *path, const char __user *name, void __user *value,
+sys_lgetxattr(const char __user *pathname, const char __user *name, void __user *value,
 	      size_t size)
 {
-	struct nameidata nd;
+	struct path path;
 	ssize_t error;
 
-	error = user_path_walk_link(path, &nd);
+	error = user_lpath(pathname, &path);
 	if (error)
 		return error;
-	error = getxattr(nd.path.dentry, name, value, size);
-	path_put(&nd.path);
+	error = getxattr(path.dentry, name, value, size);
+	path_put(&path);
 	return error;
 }
 
@@ -425,30 +425,30 @@ listxattr(struct dentry *d, char __user *list, size_t size)
 }
 
 asmlinkage ssize_t
-sys_listxattr(const char __user *path, char __user *list, size_t size)
+sys_listxattr(const char __user *pathname, char __user *list, size_t size)
 {
-	struct nameidata nd;
+	struct path path;
 	ssize_t error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		return error;
-	error = listxattr(nd.path.dentry, list, size);
-	path_put(&nd.path);
+	error = listxattr(path.dentry, list, size);
+	path_put(&path);
 	return error;
 }
 
 asmlinkage ssize_t
-sys_llistxattr(const char __user *path, char __user *list, size_t size)
+sys_llistxattr(const char __user *pathname, char __user *list, size_t size)
 {
-	struct nameidata nd;
+	struct path path;
 	ssize_t error;
 
-	error = user_path_walk_link(path, &nd);
+	error = user_lpath(pathname, &path);
 	if (error)
 		return error;
-	error = listxattr(nd.path.dentry, list, size);
-	path_put(&nd.path);
+	error = listxattr(path.dentry, list, size);
+	path_put(&path);
 	return error;
 }
 
@@ -486,38 +486,38 @@ removexattr(struct dentry *d, const char __user *name)
 }
 
 asmlinkage long
-sys_removexattr(const char __user *path, const char __user *name)
+sys_removexattr(const char __user *pathname, const char __user *name)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (error)
 		return error;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (!error) {
-		error = removexattr(nd.path.dentry, name);
-		mnt_drop_write(nd.path.mnt);
+		error = removexattr(path.dentry, name);
+		mnt_drop_write(path.mnt);
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return error;
 }
 
 asmlinkage long
-sys_lremovexattr(const char __user *path, const char __user *name)
+sys_lremovexattr(const char __user *pathname, const char __user *name)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk_link(path, &nd);
+	error = user_lpath(pathname, &path);
 	if (error)
 		return error;
-	error = mnt_want_write(nd.path.mnt);
+	error = mnt_want_write(path.mnt);
 	if (!error) {
-		error = removexattr(nd.path.dentry, name);
-		mnt_drop_write(nd.path.mnt);
+		error = removexattr(path.dentry, name);
+		mnt_drop_write(path.mnt);
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return error;
 }
 
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index a42ba9d7115..01939ba2d8d 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -84,17 +84,15 @@ xfs_find_handle(
 	switch (cmd) {
 	case XFS_IOC_PATH_TO_FSHANDLE:
 	case XFS_IOC_PATH_TO_HANDLE: {
-		struct nameidata	nd;
-		int			error;
-
-		error = user_path_walk_link((const char __user *)hreq.path, &nd);
+		struct path path;
+		int error = user_lpath((const char __user *)hreq.path, &path);
 		if (error)
 			return error;
 
-		ASSERT(nd.path.dentry);
-		ASSERT(nd.path.dentry->d_inode);
-		inode = igrab(nd.path.dentry->d_inode);
-		path_put(&nd.path);
+		ASSERT(path.dentry);
+		ASSERT(path.dentry->d_inode);
+		inode = igrab(path.dentry->d_inode);
+		path_put(&path);
 		break;
 	}
 
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 60e35a02f6c..00888ff6950 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -54,12 +54,13 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
 #define LOOKUP_OPEN		(0x0100)
 #define LOOKUP_CREATE		(0x0200)
 
-extern int __user_walk(const char __user *, unsigned, struct nameidata *);
-extern int __user_walk_fd(int dfd, const char __user *, unsigned, struct nameidata *);
-#define user_path_walk(name,nd) \
-	__user_walk_fd(AT_FDCWD, name, LOOKUP_FOLLOW, nd)
-#define user_path_walk_link(name,nd) \
-	__user_walk_fd(AT_FDCWD, name, 0, nd)
+extern int user_path_at(int, const char __user *, unsigned, struct path *);
+
+#define user_path(name, path) user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW, path)
+#define user_lpath(name, path) user_path_at(AT_FDCWD, name, 0, path)
+#define user_path_dir(name, path) \
+	user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, path)
+
 extern int path_lookup(const char *, unsigned, struct nameidata *);
 extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
 			   const char *, unsigned int, struct nameidata *);
-- 
cgit v1.2.3


From 2ad94ae654f5eb72fd3260b706aea645cf4a7791 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 21 Jul 2008 09:32:51 -0400
Subject: [PATCH] new (local) helper: user_path_parent()

Preparation to untangling intents mess: reduce the number of do_path_lookup()
callers.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/namei.c | 137 +++++++++++++++++++++++++------------------------------------
 1 file changed, 57 insertions(+), 80 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index edb5e973f9b..38ceb6e06eb 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1352,6 +1352,24 @@ int user_path_at(int dfd, const char __user *name, unsigned flags,
 	return err;
 }
 
+static int user_path_parent(int dfd, const char __user *path,
+			struct nameidata *nd, char **name)
+{
+	char *s = getname(path);
+	int error;
+
+	if (IS_ERR(s))
+		return PTR_ERR(s);
+
+	error = do_path_lookup(dfd, s, LOOKUP_PARENT, nd);
+	if (error)
+		putname(s);
+	else
+		*name = s;
+
+	return error;
+}
+
 /*
  * It's inline, so penalty for filesystems that don't use sticky bit is
  * minimal.
@@ -1989,20 +2007,18 @@ static int may_mknod(mode_t mode)
 asmlinkage long sys_mknodat(int dfd, const char __user *filename, int mode,
 				unsigned dev)
 {
-	int error = 0;
-	char * tmp;
-	struct dentry * dentry;
+	int error;
+	char *tmp;
+	struct dentry *dentry;
 	struct nameidata nd;
 
 	if (S_ISDIR(mode))
 		return -EPERM;
-	tmp = getname(filename);
-	if (IS_ERR(tmp))
-		return PTR_ERR(tmp);
 
-	error = do_path_lookup(dfd, tmp, LOOKUP_PARENT, &nd);
+	error = user_path_parent(dfd, filename, &nd, &tmp);
 	if (error)
-		goto out;
+		return error;
+
 	dentry = lookup_create(&nd, 0);
 	if (IS_ERR(dentry)) {
 		error = PTR_ERR(dentry);
@@ -2034,7 +2050,6 @@ out_dput:
 out_unlock:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 	path_put(&nd.path);
-out:
 	putname(tmp);
 
 	return error;
@@ -2074,14 +2089,10 @@ asmlinkage long sys_mkdirat(int dfd, const char __user *pathname, int mode)
 	struct dentry *dentry;
 	struct nameidata nd;
 
-	tmp = getname(pathname);
-	error = PTR_ERR(tmp);
-	if (IS_ERR(tmp))
+	error = user_path_parent(dfd, pathname, &nd, &tmp);
+	if (error)
 		goto out_err;
 
-	error = do_path_lookup(dfd, tmp, LOOKUP_PARENT, &nd);
-	if (error)
-		goto out;
 	dentry = lookup_create(&nd, 1);
 	error = PTR_ERR(dentry);
 	if (IS_ERR(dentry))
@@ -2099,7 +2110,6 @@ out_dput:
 out_unlock:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 	path_put(&nd.path);
-out:
 	putname(tmp);
 out_err:
 	return error;
@@ -2177,13 +2187,9 @@ static long do_rmdir(int dfd, const char __user *pathname)
 	struct dentry *dentry;
 	struct nameidata nd;
 
-	name = getname(pathname);
-	if(IS_ERR(name))
-		return PTR_ERR(name);
-
-	error = do_path_lookup(dfd, name, LOOKUP_PARENT, &nd);
+	error = user_path_parent(dfd, pathname, &nd, &name);
 	if (error)
-		goto exit;
+		return error;
 
 	switch(nd.last_type) {
 		case LAST_DOTDOT:
@@ -2212,7 +2218,6 @@ exit2:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 exit1:
 	path_put(&nd.path);
-exit:
 	putname(name);
 	return error;
 }
@@ -2261,19 +2266,16 @@ int vfs_unlink(struct inode *dir, struct dentry *dentry)
  */
 static long do_unlinkat(int dfd, const char __user *pathname)
 {
-	int error = 0;
-	char * name;
+	int error;
+	char *name;
 	struct dentry *dentry;
 	struct nameidata nd;
 	struct inode *inode = NULL;
 
-	name = getname(pathname);
-	if(IS_ERR(name))
-		return PTR_ERR(name);
-
-	error = do_path_lookup(dfd, name, LOOKUP_PARENT, &nd);
+	error = user_path_parent(dfd, pathname, &nd, &name);
 	if (error)
-		goto exit;
+		return error;
+
 	error = -EISDIR;
 	if (nd.last_type != LAST_NORM)
 		goto exit1;
@@ -2300,7 +2302,6 @@ static long do_unlinkat(int dfd, const char __user *pathname)
 		iput(inode);	/* truncate the inode here */
 exit1:
 	path_put(&nd.path);
-exit:
 	putname(name);
 	return error;
 
@@ -2350,23 +2351,20 @@ int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname)
 asmlinkage long sys_symlinkat(const char __user *oldname,
 			      int newdfd, const char __user *newname)
 {
-	int error = 0;
-	char * from;
-	char * to;
+	int error;
+	char *from;
+	char *to;
 	struct dentry *dentry;
 	struct nameidata nd;
 
 	from = getname(oldname);
-	if(IS_ERR(from))
+	if (IS_ERR(from))
 		return PTR_ERR(from);
-	to = getname(newname);
-	error = PTR_ERR(to);
-	if (IS_ERR(to))
-		goto out_putname;
 
-	error = do_path_lookup(newdfd, to, LOOKUP_PARENT, &nd);
+	error = user_path_parent(newdfd, newname, &nd, &to);
 	if (error)
-		goto out;
+		goto out_putname;
+
 	dentry = lookup_create(&nd, 0);
 	error = PTR_ERR(dentry);
 	if (IS_ERR(dentry))
@@ -2382,7 +2380,6 @@ out_dput:
 out_unlock:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 	path_put(&nd.path);
-out:
 	putname(to);
 out_putname:
 	putname(from);
@@ -2449,21 +2446,18 @@ asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
 	struct nameidata nd;
 	struct path old_path;
 	int error;
-	char * to;
+	char *to;
 
 	if ((flags & ~AT_SYMLINK_FOLLOW) != 0)
 		return -EINVAL;
 
-	to = getname(newname);
-	if (IS_ERR(to))
-		return PTR_ERR(to);
-
 	error = user_path_at(olddfd, oldname,
 			     flags & AT_SYMLINK_FOLLOW ? LOOKUP_FOLLOW : 0,
 			     &old_path);
 	if (error)
-		goto exit;
-	error = do_path_lookup(newdfd, to, LOOKUP_PARENT, &nd);
+		return error;
+
+	error = user_path_parent(newdfd, newname, &nd, &to);
 	if (error)
 		goto out;
 	error = -EXDEV;
@@ -2484,10 +2478,9 @@ out_unlock:
 	mutex_unlock(&nd.path.dentry->d_inode->i_mutex);
 out_release:
 	path_put(&nd.path);
+	putname(to);
 out:
 	path_put(&old_path);
-exit:
-	putname(to);
 
 	return error;
 }
@@ -2643,20 +2636,22 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	return error;
 }
 
-static int do_rename(int olddfd, const char *oldname,
-			int newdfd, const char *newname)
+asmlinkage long sys_renameat(int olddfd, const char __user *oldname,
+			     int newdfd, const char __user *newname)
 {
-	int error = 0;
-	struct dentry * old_dir, * new_dir;
-	struct dentry * old_dentry, *new_dentry;
-	struct dentry * trap;
+	struct dentry *old_dir, *new_dir;
+	struct dentry *old_dentry, *new_dentry;
+	struct dentry *trap;
 	struct nameidata oldnd, newnd;
+	char *from;
+	char *to;
+	int error;
 
-	error = do_path_lookup(olddfd, oldname, LOOKUP_PARENT, &oldnd);
+	error = user_path_parent(olddfd, oldname, &oldnd, &from);
 	if (error)
 		goto exit;
 
-	error = do_path_lookup(newdfd, newname, LOOKUP_PARENT, &newnd);
+	error = user_path_parent(newdfd, newname, &newnd, &to);
 	if (error)
 		goto exit1;
 
@@ -2718,29 +2713,11 @@ exit3:
 	unlock_rename(new_dir, old_dir);
 exit2:
 	path_put(&newnd.path);
+	putname(to);
 exit1:
 	path_put(&oldnd.path);
-exit:
-	return error;
-}
-
-asmlinkage long sys_renameat(int olddfd, const char __user *oldname,
-			     int newdfd, const char __user *newname)
-{
-	int error;
-	char * from;
-	char * to;
-
-	from = getname(oldname);
-	if(IS_ERR(from))
-		return PTR_ERR(from);
-	to = getname(newname);
-	error = PTR_ERR(to);
-	if (!IS_ERR(to)) {
-		error = do_rename(olddfd, from, newdfd, to);
-		putname(to);
-	}
 	putname(from);
+exit:
 	return error;
 }
 
-- 
cgit v1.2.3


From a569c711f63995ad80c23918525111e0cdb0bc73 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 23 Jul 2008 14:42:05 -0400
Subject: [PATCH] don't pass nameidata to gfs2_lookupi()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/gfs2/inode.c      | 6 +++---
 fs/gfs2/inode.h      | 2 +-
 fs/gfs2/ops_export.c | 2 +-
 fs/gfs2/ops_inode.c  | 4 ++--
 fs/gfs2/super.c      | 2 +-
 5 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 6da0ab355b8..8b0806a3294 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -448,7 +448,7 @@ struct inode *gfs2_lookup_simple(struct inode *dip, const char *name)
 	struct qstr qstr;
 	struct inode *inode;
 	gfs2_str2qstr(&qstr, name);
-	inode = gfs2_lookupi(dip, &qstr, 1, NULL);
+	inode = gfs2_lookupi(dip, &qstr, 1);
 	/* gfs2_lookupi has inconsistent callers: vfs
 	 * related routines expect NULL for no entry found,
 	 * gfs2_lookup_simple callers expect ENOENT
@@ -477,7 +477,7 @@ struct inode *gfs2_lookup_simple(struct inode *dip, const char *name)
  */
 
 struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
-			   int is_root, struct nameidata *nd)
+			   int is_root)
 {
 	struct super_block *sb = dir->i_sb;
 	struct gfs2_inode *dip = GFS2_I(dir);
@@ -1173,7 +1173,7 @@ int gfs2_ok_to_move(struct gfs2_inode *this, struct gfs2_inode *to)
 			break;
 		}
 
-		tmp = gfs2_lookupi(dir, &dotdot, 1, NULL);
+		tmp = gfs2_lookupi(dir, &dotdot, 1);
 		if (IS_ERR(tmp)) {
 			error = PTR_ERR(tmp);
 			break;
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index 6074c2506f7..58f9607d6a8 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -83,7 +83,7 @@ int gfs2_inode_refresh(struct gfs2_inode *ip);
 int gfs2_dinode_dealloc(struct gfs2_inode *inode);
 int gfs2_change_nlink(struct gfs2_inode *ip, int diff);
 struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
-			   int is_root, struct nameidata *nd);
+			   int is_root);
 struct inode *gfs2_createi(struct gfs2_holder *ghs, const struct qstr *name,
 			   unsigned int mode, dev_t dev);
 int gfs2_rmdiri(struct gfs2_inode *dip, const struct qstr *name,
diff --git a/fs/gfs2/ops_export.c b/fs/gfs2/ops_export.c
index 990d9f4bc46..9cda8536530 100644
--- a/fs/gfs2/ops_export.c
+++ b/fs/gfs2/ops_export.c
@@ -134,7 +134,7 @@ static struct dentry *gfs2_get_parent(struct dentry *child)
 	struct dentry *dentry;
 
 	gfs2_str2qstr(&dotdot, "..");
-	inode = gfs2_lookupi(child->d_inode, &dotdot, 1, NULL);
+	inode = gfs2_lookupi(child->d_inode, &dotdot, 1);
 
 	if (!inode)
 		return ERR_PTR(-ENOENT);
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 4e982532f08..e2c62f73a77 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -74,7 +74,7 @@ static int gfs2_create(struct inode *dir, struct dentry *dentry,
 			return PTR_ERR(inode);
 		}
 
-		inode = gfs2_lookupi(dir, &dentry->d_name, 0, nd);
+		inode = gfs2_lookupi(dir, &dentry->d_name, 0);
 		if (inode) {
 			if (!IS_ERR(inode)) {
 				gfs2_holder_uninit(ghs);
@@ -109,7 +109,7 @@ static struct dentry *gfs2_lookup(struct inode *dir, struct dentry *dentry,
 
 	dentry->d_op = &gfs2_dops;
 
-	inode = gfs2_lookupi(dir, &dentry->d_name, 0, nd);
+	inode = gfs2_lookupi(dir, &dentry->d_name, 0);
 	if (inode && IS_ERR(inode))
 		return ERR_CAST(inode);
 
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 63a8a902d9d..ca831991cbc 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -389,7 +389,7 @@ int gfs2_jindex_hold(struct gfs2_sbd *sdp, struct gfs2_holder *ji_gh)
 			break;
 
 		INIT_LIST_HEAD(&jd->extent_list);
-		jd->jd_inode = gfs2_lookupi(sdp->sd_jindex, &name, 1, NULL);
+		jd->jd_inode = gfs2_lookupi(sdp->sd_jindex, &name, 1);
 		if (!jd->jd_inode || IS_ERR(jd->jd_inode)) {
 			if (!jd->jd_inode)
 				error = -ENOENT;
-- 
cgit v1.2.3


From 58ec42b061bf5dad8fa0370a19966cfd96eaf80c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 23 Jul 2008 14:45:55 -0400
Subject: [PATCH] don't pass nameidata to __ncp_lookup_validate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/ncpfs/dir.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c
index 011ef0b6d2d..07e9715b865 100644
--- a/fs/ncpfs/dir.c
+++ b/fs/ncpfs/dir.c
@@ -266,7 +266,7 @@ leave_me:;
 
 
 static int
-__ncp_lookup_validate(struct dentry * dentry, struct nameidata *nd)
+__ncp_lookup_validate(struct dentry *dentry)
 {
 	struct ncp_server *server;
 	struct dentry *parent;
@@ -340,7 +340,7 @@ ncp_lookup_validate(struct dentry * dentry, struct nameidata *nd)
 {
 	int res;
 	lock_kernel();
-	res = __ncp_lookup_validate(dentry, nd);
+	res = __ncp_lookup_validate(dentry);
 	unlock_kernel();
 	return res;
 }
-- 
cgit v1.2.3


From 3c333937ee3be114b181c4861188cfe8f6a59697 Mon Sep 17 00:00:00 2001
From: Ulrich Drepper <drepper@redhat.com>
Date: Fri, 25 Jul 2008 22:32:13 -0400
Subject: [PATCH] dup3 fix

Al Viro notice one cornercase that the new dup3() code.  The dup2()
function, as a special case, handles dup-ing to the same file
descriptor.  In this case the current dup3() code does nothing at
all.  I.e., it ingnores the flags parameter.  This shouldn't happen,
the close-on-exec flag should be set if requested.

In case the O_CLOEXEC bit in the flags parameter is not set the
dup3() function should behave in this respect identical to dup2().
This means dup3(fd, fd, 0) should not actively reset the c-o-e
flag.

The patch below implements this minor change.

[AV: credits to Artur Grabowski for bringing that up as potential subtle point
in dup2() behaviour]

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/fcntl.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/fcntl.c b/fs/fcntl.c
index 9679fcbdeaa..ce12a688511 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -139,8 +139,13 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 	if (!(file = fcheck(oldfd)))
 		goto out_unlock;
 	err = newfd;
-	if (newfd == oldfd)
+	if (unlikely(newfd == oldfd)) {
+		if (flags & O_CLOEXEC) {
+			fdt = files_fdtable(files);
+			FD_SET(newfd, fdt->close_on_exec);
+		}
 		goto out_unlock;
+	}
 	err = -EBADF;
 	if (newfd >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
 		goto out_unlock;
-- 
cgit v1.2.3


From 516e0cc5646f377ab80fcc2ee639892eccb99853 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 26 Jul 2008 00:39:17 -0400
Subject: [PATCH] f_count may wrap around

make it atomic_long_t; while we are at it, get rid of useless checks in affs,
hfs and hpfs - ->open() always has it equal to 1, ->release() - to 0.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/net/ppp_generic.c |  6 +++---
 fs/affs/file.c            |  4 ----
 fs/aio.c                  |  6 +++---
 fs/file_table.c           | 10 +++++-----
 fs/hfs/inode.c            |  4 ----
 fs/hfsplus/inode.c        |  4 ----
 include/linux/fs.h        |  6 +++---
 include/net/af_unix.h     |  2 +-
 net/sched/sch_atm.c       |  4 ++--
 net/unix/af_unix.c        |  2 +-
 net/unix/garbage.c        | 18 +++++++++---------
 11 files changed, 27 insertions(+), 39 deletions(-)

diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 739b3ab7bcc..ddccc074a76 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -581,12 +581,12 @@ static long ppp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			if (file == ppp->owner)
 				ppp_shutdown_interface(ppp);
 		}
-		if (atomic_read(&file->f_count) <= 2) {
+		if (atomic_long_read(&file->f_count) <= 2) {
 			ppp_release(NULL, file);
 			err = 0;
 		} else
-			printk(KERN_DEBUG "PPPIOCDETACH file->f_count=%d\n",
-			       atomic_read(&file->f_count));
+			printk(KERN_DEBUG "PPPIOCDETACH file->f_count=%ld\n",
+			       atomic_long_read(&file->f_count));
 		unlock_kernel();
 		return err;
 	}
diff --git a/fs/affs/file.c b/fs/affs/file.c
index 6eac7bdeec9..1377b1240b6 100644
--- a/fs/affs/file.c
+++ b/fs/affs/file.c
@@ -46,8 +46,6 @@ const struct inode_operations affs_file_inode_operations = {
 static int
 affs_file_open(struct inode *inode, struct file *filp)
 {
-	if (atomic_read(&filp->f_count) != 1)
-		return 0;
 	pr_debug("AFFS: open(%lu,%d)\n",
 		 inode->i_ino, atomic_read(&AFFS_I(inode)->i_opencnt));
 	atomic_inc(&AFFS_I(inode)->i_opencnt);
@@ -57,8 +55,6 @@ affs_file_open(struct inode *inode, struct file *filp)
 static int
 affs_file_release(struct inode *inode, struct file *filp)
 {
-	if (atomic_read(&filp->f_count) != 0)
-		return 0;
 	pr_debug("AFFS: release(%lu, %d)\n",
 		 inode->i_ino, atomic_read(&AFFS_I(inode)->i_opencnt));
 
diff --git a/fs/aio.c b/fs/aio.c
index 0051fd94b44..f658441d566 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -512,8 +512,8 @@ static void aio_fput_routine(struct work_struct *data)
  */
 static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
 {
-	dprintk(KERN_DEBUG "aio_put(%p): f_count=%d\n",
-		req, atomic_read(&req->ki_filp->f_count));
+	dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n",
+		req, atomic_long_read(&req->ki_filp->f_count));
 
 	assert_spin_locked(&ctx->ctx_lock);
 
@@ -528,7 +528,7 @@ static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
 	/* Must be done under the lock to serialise against cancellation.
 	 * Call this aio_fput as it duplicates fput via the fput_work.
 	 */
-	if (unlikely(atomic_dec_and_test(&req->ki_filp->f_count))) {
+	if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
 		get_ioctx(ctx);
 		spin_lock(&fput_lock);
 		list_add(&req->ki_list, &fput_head);
diff --git a/fs/file_table.c b/fs/file_table.c
index 83084225b4c..f45a4493f9e 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -120,7 +120,7 @@ struct file *get_empty_filp(void)
 
 	tsk = current;
 	INIT_LIST_HEAD(&f->f_u.fu_list);
-	atomic_set(&f->f_count, 1);
+	atomic_long_set(&f->f_count, 1);
 	rwlock_init(&f->f_owner.lock);
 	f->f_uid = tsk->fsuid;
 	f->f_gid = tsk->fsgid;
@@ -219,7 +219,7 @@ EXPORT_SYMBOL(init_file);
 
 void fput(struct file *file)
 {
-	if (atomic_dec_and_test(&file->f_count))
+	if (atomic_long_dec_and_test(&file->f_count))
 		__fput(file);
 }
 
@@ -294,7 +294,7 @@ struct file *fget(unsigned int fd)
 	rcu_read_lock();
 	file = fcheck_files(files, fd);
 	if (file) {
-		if (!atomic_inc_not_zero(&file->f_count)) {
+		if (!atomic_long_inc_not_zero(&file->f_count)) {
 			/* File object ref couldn't be taken */
 			rcu_read_unlock();
 			return NULL;
@@ -326,7 +326,7 @@ struct file *fget_light(unsigned int fd, int *fput_needed)
 		rcu_read_lock();
 		file = fcheck_files(files, fd);
 		if (file) {
-			if (atomic_inc_not_zero(&file->f_count))
+			if (atomic_long_inc_not_zero(&file->f_count))
 				*fput_needed = 1;
 			else
 				/* Didn't get the reference, someone's freed */
@@ -341,7 +341,7 @@ struct file *fget_light(unsigned int fd, int *fput_needed)
 
 void put_filp(struct file *file)
 {
-	if (atomic_dec_and_test(&file->f_count)) {
+	if (atomic_long_dec_and_test(&file->f_count)) {
 		security_file_free(file);
 		file_kill(file);
 		file_free(file);
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index aa73f3fd5dd..7e19835efa2 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -522,8 +522,6 @@ static int hfs_file_open(struct inode *inode, struct file *file)
 {
 	if (HFS_IS_RSRC(inode))
 		inode = HFS_I(inode)->rsrc_inode;
-	if (atomic_read(&file->f_count) != 1)
-		return 0;
 	atomic_inc(&HFS_I(inode)->opencnt);
 	return 0;
 }
@@ -534,8 +532,6 @@ static int hfs_file_release(struct inode *inode, struct file *file)
 
 	if (HFS_IS_RSRC(inode))
 		inode = HFS_I(inode)->rsrc_inode;
-	if (atomic_read(&file->f_count) != 0)
-		return 0;
 	if (atomic_dec_and_test(&HFS_I(inode)->opencnt)) {
 		mutex_lock(&inode->i_mutex);
 		hfs_file_truncate(inode);
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index d4014e3044d..b085d64a2b6 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -254,8 +254,6 @@ static int hfsplus_file_open(struct inode *inode, struct file *file)
 {
 	if (HFSPLUS_IS_RSRC(inode))
 		inode = HFSPLUS_I(inode).rsrc_inode;
-	if (atomic_read(&file->f_count) != 1)
-		return 0;
 	atomic_inc(&HFSPLUS_I(inode).opencnt);
 	return 0;
 }
@@ -266,8 +264,6 @@ static int hfsplus_file_release(struct inode *inode, struct file *file)
 
 	if (HFSPLUS_IS_RSRC(inode))
 		inode = HFSPLUS_I(inode).rsrc_inode;
-	if (atomic_read(&file->f_count) != 0)
-		return 0;
 	if (atomic_dec_and_test(&HFSPLUS_I(inode).opencnt)) {
 		mutex_lock(&inode->i_mutex);
 		hfsplus_file_truncate(inode);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 9d2de4cadab..7676fa1c20a 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -795,7 +795,7 @@ struct file {
 #define f_dentry	f_path.dentry
 #define f_vfsmnt	f_path.mnt
 	const struct file_operations	*f_op;
-	atomic_t		f_count;
+	atomic_long_t		f_count;
 	unsigned int 		f_flags;
 	mode_t			f_mode;
 	loff_t			f_pos;
@@ -824,8 +824,8 @@ extern spinlock_t files_lock;
 #define file_list_lock() spin_lock(&files_lock);
 #define file_list_unlock() spin_unlock(&files_lock);
 
-#define get_file(x)	atomic_inc(&(x)->f_count)
-#define file_count(x)	atomic_read(&(x)->f_count)
+#define get_file(x)	atomic_long_inc(&(x)->f_count)
+#define file_count(x)	atomic_long_read(&(x)->f_count)
 
 #ifdef CONFIG_DEBUG_WRITECOUNT
 static inline void file_take_write(struct file *f)
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 2dfa96b0575..7dd29b7e461 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -51,7 +51,7 @@ struct unix_sock {
         struct sock		*peer;
         struct sock		*other;
 	struct list_head	link;
-        atomic_t                inflight;
+        atomic_long_t           inflight;
         spinlock_t		lock;
 	unsigned int		gc_candidate : 1;
         wait_queue_head_t       peer_wait;
diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c
index 04faa835be1..6b517b9dac5 100644
--- a/net/sched/sch_atm.c
+++ b/net/sched/sch_atm.c
@@ -162,7 +162,7 @@ static void atm_tc_put(struct Qdisc *sch, unsigned long cl)
 	qdisc_destroy(flow->q);
 	tcf_destroy_chain(&flow->filter_list);
 	if (flow->sock) {
-		pr_debug("atm_tc_put: f_count %d\n",
+		pr_debug("atm_tc_put: f_count %ld\n",
 			file_count(flow->sock->file));
 		flow->vcc->pop = flow->old_pop;
 		sockfd_put(flow->sock);
@@ -259,7 +259,7 @@ static int atm_tc_change(struct Qdisc *sch, u32 classid, u32 parent,
 	sock = sockfd_lookup(fd, &error);
 	if (!sock)
 		return error;	/* f_count++ */
-	pr_debug("atm_tc_change: f_count %d\n", file_count(sock->file));
+	pr_debug("atm_tc_change: f_count %ld\n", file_count(sock->file));
 	if (sock->ops->family != PF_ATMSVC && sock->ops->family != PF_ATMPVC) {
 		error = -EPROTOTYPE;
 		goto err_out;
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 70ceb1604ad..6e7fec74bdb 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -603,7 +603,7 @@ static struct sock * unix_create1(struct net *net, struct socket *sock)
 	u->dentry = NULL;
 	u->mnt	  = NULL;
 	spin_lock_init(&u->lock);
-	atomic_set(&u->inflight, 0);
+	atomic_long_set(&u->inflight, 0);
 	INIT_LIST_HEAD(&u->link);
 	mutex_init(&u->readlock); /* single task reading lock */
 	init_waitqueue_head(&u->peer_wait);
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index ebdff3d877a..2a27b84f740 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -127,7 +127,7 @@ void unix_inflight(struct file *fp)
 	if(s) {
 		struct unix_sock *u = unix_sk(s);
 		spin_lock(&unix_gc_lock);
-		if (atomic_inc_return(&u->inflight) == 1) {
+		if (atomic_long_inc_return(&u->inflight) == 1) {
 			BUG_ON(!list_empty(&u->link));
 			list_add_tail(&u->link, &gc_inflight_list);
 		} else {
@@ -145,7 +145,7 @@ void unix_notinflight(struct file *fp)
 		struct unix_sock *u = unix_sk(s);
 		spin_lock(&unix_gc_lock);
 		BUG_ON(list_empty(&u->link));
-		if (atomic_dec_and_test(&u->inflight))
+		if (atomic_long_dec_and_test(&u->inflight))
 			list_del_init(&u->link);
 		unix_tot_inflight--;
 		spin_unlock(&unix_gc_lock);
@@ -237,17 +237,17 @@ static void scan_children(struct sock *x, void (*func)(struct unix_sock *),
 
 static void dec_inflight(struct unix_sock *usk)
 {
-	atomic_dec(&usk->inflight);
+	atomic_long_dec(&usk->inflight);
 }
 
 static void inc_inflight(struct unix_sock *usk)
 {
-	atomic_inc(&usk->inflight);
+	atomic_long_inc(&usk->inflight);
 }
 
 static void inc_inflight_move_tail(struct unix_sock *u)
 {
-	atomic_inc(&u->inflight);
+	atomic_long_inc(&u->inflight);
 	/*
 	 * If this is still a candidate, move it to the end of the
 	 * list, so that it's checked even if it was already passed
@@ -288,11 +288,11 @@ void unix_gc(void)
 	 * before the detach without atomicity guarantees.
 	 */
 	list_for_each_entry_safe(u, next, &gc_inflight_list, link) {
-		int total_refs;
-		int inflight_refs;
+		long total_refs;
+		long inflight_refs;
 
 		total_refs = file_count(u->sk.sk_socket->file);
-		inflight_refs = atomic_read(&u->inflight);
+		inflight_refs = atomic_long_read(&u->inflight);
 
 		BUG_ON(inflight_refs < 1);
 		BUG_ON(total_refs < inflight_refs);
@@ -324,7 +324,7 @@ void unix_gc(void)
 		/* Move cursor to after the current position. */
 		list_move(&cursor, &u->link);
 
-		if (atomic_read(&u->inflight) > 0) {
+		if (atomic_long_read(&u->inflight) > 0) {
 			list_move_tail(&u->link, &gc_inflight_list);
 			u->gc_candidate = 0;
 			scan_children(&u->sk, inc_inflight_move_tail, NULL);
-- 
cgit v1.2.3


From 964bd183624c03680796b63b4ab97ee3905a806a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 26 Jul 2008 03:33:14 -0400
Subject: [PATCH] get rid of __user_path_lookup_open

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/exec.c             | 14 ++++++++++----
 fs/namei.c            | 13 -------------
 include/linux/namei.h |  1 -
 3 files changed, 10 insertions(+), 18 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index eca58c29ede..9696bbf0f0b 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -106,11 +106,17 @@ static inline void put_binfmt(struct linux_binfmt * fmt)
  */
 asmlinkage long sys_uselib(const char __user * library)
 {
-	struct file * file;
+	struct file *file;
 	struct nameidata nd;
-	int error;
-
-	error = __user_path_lookup_open(library, LOOKUP_FOLLOW, &nd, FMODE_READ|FMODE_EXEC);
+	char *tmp = getname(library);
+	int error = PTR_ERR(tmp);
+
+	if (!IS_ERR(tmp)) {
+		error = path_lookup_open(AT_FDCWD, tmp,
+					 LOOKUP_FOLLOW, &nd,
+					 FMODE_READ|FMODE_EXEC);
+		putname(tmp);
+	}
 	if (error)
 		goto out;
 
diff --git a/fs/namei.c b/fs/namei.c
index 38ceb6e06eb..a7b0a0b8012 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1193,19 +1193,6 @@ static int path_lookup_create(int dfd, const char *name,
 			nd, open_flags, create_mode);
 }
 
-int __user_path_lookup_open(const char __user *name, unsigned int lookup_flags,
-		struct nameidata *nd, int open_flags)
-{
-	char *tmp = getname(name);
-	int err = PTR_ERR(tmp);
-
-	if (!IS_ERR(tmp)) {
-		err = __path_lookup_intent_open(AT_FDCWD, tmp, lookup_flags, nd, open_flags, 0);
-		putname(tmp);
-	}
-	return err;
-}
-
 static struct dentry *__lookup_hash(struct qstr *name,
 		struct dentry *base, struct nameidata *nd)
 {
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 00888ff6950..68f8c3203c8 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -65,7 +65,6 @@ extern int path_lookup(const char *, unsigned, struct nameidata *);
 extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
 			   const char *, unsigned int, struct nameidata *);
 
-extern int __user_path_lookup_open(const char __user *, unsigned lookup_flags, struct nameidata *nd, int open_flags);
 extern int path_lookup_open(int dfd, const char *name, unsigned lookup_flags, struct nameidata *, int open_flags);
 extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
 		int (*open)(struct inode *, struct file *));
-- 
cgit v1.2.3


From 3f8206d496e9e9495afb1d4e70d29712b4d403c9 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 26 Jul 2008 03:46:43 -0400
Subject: [PATCH] get rid of indirect users of namei.h

fs.h needs path.h, not namei.h; nfs_fs.h doesn't need it at all.
Several places in the tree needed direct include.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/nfsd/nfsctl.c       | 1 +
 fs/ubifs/file.c        | 1 +
 include/linux/fs.h     | 2 +-
 include/linux/nfs_fs.h | 1 -
 kernel/cgroup.c        | 1 +
 5 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 1955a2702e6..c53e65f8f3a 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -12,6 +12,7 @@
 #include <linux/time.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
+#include <linux/namei.h>
 #include <linux/fcntl.h>
 #include <linux/net.h>
 #include <linux/in.h>
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 005a3b854d9..8565e586e53 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -53,6 +53,7 @@
 
 #include "ubifs.h"
 #include <linux/mount.h>
+#include <linux/namei.h>
 
 static int read_block(struct inode *inode, void *addr, unsigned int block,
 		      struct ubifs_data_node *dn)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7676fa1c20a..8252b045e62 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -279,7 +279,7 @@ extern int dir_notify_enable;
 #include <linux/types.h>
 #include <linux/kdev_t.h>
 #include <linux/dcache.h>
-#include <linux/namei.h>
+#include <linux/path.h>
 #include <linux/stat.h>
 #include <linux/cache.h>
 #include <linux/kobject.h>
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index f08f9ca602a..78a5922a2f1 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -42,7 +42,6 @@
 #include <linux/in.h>
 #include <linux/kref.h>
 #include <linux/mm.h>
-#include <linux/namei.h>
 #include <linux/pagemap.h>
 #include <linux/rbtree.h>
 #include <linux/rwsem.h>
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 89bd6fb7894..657f8f8d93a 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -45,6 +45,7 @@
 #include <linux/delayacct.h>
 #include <linux/cgroupstats.h>
 #include <linux/hash.h>
+#include <linux/namei.h>
 
 #include <asm/atomic.h>
 
-- 
cgit v1.2.3


From 4cc38a1b383f0c6c65a3fef4ff8144e8000e4ec3 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 26 Jul 2008 03:48:26 -0400
Subject: [PATCH] remove remaining namei_{32,64}.h crap

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 include/asm-sparc/namei_32.h | 13 -------------
 include/asm-sparc/namei_64.h | 13 -------------
 2 files changed, 26 deletions(-)
 delete mode 100644 include/asm-sparc/namei_32.h
 delete mode 100644 include/asm-sparc/namei_64.h

diff --git a/include/asm-sparc/namei_32.h b/include/asm-sparc/namei_32.h
deleted file mode 100644
index 0646102fb02..00000000000
--- a/include/asm-sparc/namei_32.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-sparc/namei.h
- *
- * Routines to handle famous /usr/gnemul/s*.
- * Included from linux/fs/namei.c
- */
-
-#ifndef __SPARC_NAMEI_H
-#define __SPARC_NAMEI_H
-
-#define __emul_prefix() NULL
-
-#endif /* __SPARC_NAMEI_H */
diff --git a/include/asm-sparc/namei_64.h b/include/asm-sparc/namei_64.h
deleted file mode 100644
index cbc1b4c0689..00000000000
--- a/include/asm-sparc/namei_64.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-sparc64/namei.h
- *
- * Routines to handle famous /usr/gnemul/s*.
- * Included from linux/fs/namei.c
- */
-
-#ifndef __SPARC64_NAMEI_H
-#define __SPARC64_NAMEI_H
-
-#define __emul_prefix() NULL
-
-#endif /* __SPARC64_NAMEI_H */
-- 
cgit v1.2.3


From 6c5d0512a091480c9f981162227fdb1c9d70e555 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 26 Jul 2008 13:38:19 -0400
Subject: [PATCH] get rid of corner case in dup3() entirely

Since Ulrich is OK with getting rid of dup3(fd, fd, flags) completely,
to hell the damn thing goes.  Corner case for dup2() is handled in
sys_dup2() (complete with -EBADF if dup2(fd, fd) is called with fd
that is not open), the rest is done in dup3().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/fcntl.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/fs/fcntl.c b/fs/fcntl.c
index ce12a688511..3deec988708 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -135,18 +135,12 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 	if ((flags & ~O_CLOEXEC) != 0)
 		return -EINVAL;
 
+	if (unlikely(oldfd == newfd))
+		return -EINVAL;
+
 	spin_lock(&files->file_lock);
 	if (!(file = fcheck(oldfd)))
 		goto out_unlock;
-	err = newfd;
-	if (unlikely(newfd == oldfd)) {
-		if (flags & O_CLOEXEC) {
-			fdt = files_fdtable(files);
-			FD_SET(newfd, fdt->close_on_exec);
-		}
-		goto out_unlock;
-	}
-	err = -EBADF;
 	if (newfd >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
 		goto out_unlock;
 	get_file(file);			/* We are now finished with oldfd */
@@ -194,6 +188,14 @@ out_fput:
 
 asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
 {
+	if (unlikely(newfd == oldfd)) { /* corner case */
+		struct files_struct *files = current->files;
+		rcu_read_lock();
+		if (!fcheck_files(files, oldfd))
+			oldfd = -EBADF;
+		rcu_read_unlock();
+		return oldfd;
+	}
 	return sys_dup3(oldfd, newfd, 0);
 }
 
-- 
cgit v1.2.3


From 4e1e018ecc6f7bfd10fc75b3ff9715cc8164e0a2 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 26 Jul 2008 16:01:20 -0400
Subject: [PATCH] fix RLIM_NOFILE handling

* dup2() should return -EBADF on exceeded sysctl_nr_open
* dup() should *not* return -EINVAL even if you have rlimit set to 0;
  it should get -EMFILE instead.

Check for orig_start exceeding rlimit taken to sys_fcntl().
Failing expand_files() in dup{2,3}() now gets -EMFILE remapped to -EBADF.
Consequently, remaining checks for rlimit are taken to expand_files().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/fcntl.c | 18 ++++++------------
 fs/file.c  |  9 +++++++++
 fs/open.c  |  9 ---------
 3 files changed, 15 insertions(+), 21 deletions(-)

diff --git a/fs/fcntl.c b/fs/fcntl.c
index 3deec988708..61d62513681 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -64,11 +64,6 @@ static int locate_fd(unsigned int orig_start, int cloexec)
 	struct fdtable *fdt;
 
 	spin_lock(&files->file_lock);
-
-	error = -EINVAL;
-	if (orig_start >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
-		goto out;
-
 repeat:
 	fdt = files_fdtable(files);
 	/*
@@ -83,10 +78,6 @@ repeat:
 	if (start < fdt->max_fds)
 		newfd = find_next_zero_bit(fdt->open_fds->fds_bits,
 					   fdt->max_fds, start);
-	
-	error = -EMFILE;
-	if (newfd >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
-		goto out;
 
 	error = expand_files(files, newfd);
 	if (error < 0)
@@ -141,13 +132,14 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
 	spin_lock(&files->file_lock);
 	if (!(file = fcheck(oldfd)))
 		goto out_unlock;
-	if (newfd >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
-		goto out_unlock;
 	get_file(file);			/* We are now finished with oldfd */
 
 	err = expand_files(files, newfd);
-	if (err < 0)
+	if (unlikely(err < 0)) {
+		if (err == -EMFILE)
+			err = -EBADF;
 		goto out_fput;
+	}
 
 	/* To avoid races with open() and dup(), we will mark the fd as
 	 * in-use in the open-file bitmap throughout the entire dup2()
@@ -328,6 +320,8 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg,
 	switch (cmd) {
 	case F_DUPFD:
 	case F_DUPFD_CLOEXEC:
+		if (arg >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
+			break;
 		get_file(filp);
 		err = dupfd(filp, arg, cmd == F_DUPFD_CLOEXEC);
 		break;
diff --git a/fs/file.c b/fs/file.c
index 7b3887e054d..d8773b19fe4 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -250,9 +250,18 @@ int expand_files(struct files_struct *files, int nr)
 	struct fdtable *fdt;
 
 	fdt = files_fdtable(files);
+
+	/*
+	 * N.B. For clone tasks sharing a files structure, this test
+	 * will limit the total number of files that can be opened.
+	 */
+	if (nr >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
+		return -EMFILE;
+
 	/* Do we need to expand? */
 	if (nr < fdt->max_fds)
 		return 0;
+
 	/* Can we expand? */
 	if (nr >= sysctl_nr_open)
 		return -EMFILE;
diff --git a/fs/open.c b/fs/open.c
index 3fe1a6857c7..52647be277a 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -972,7 +972,6 @@ int get_unused_fd_flags(int flags)
 	int fd, error;
 	struct fdtable *fdt;
 
-  	error = -EMFILE;
 	spin_lock(&files->file_lock);
 
 repeat:
@@ -980,13 +979,6 @@ repeat:
 	fd = find_next_zero_bit(fdt->open_fds->fds_bits, fdt->max_fds,
 				files->next_fd);
 
-	/*
-	 * N.B. For clone tasks sharing a files structure, this test
-	 * will limit the total number of files that can be opened.
-	 */
-	if (fd >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
-		goto out;
-
 	/* Do we need to expand the fd array or fd set?  */
 	error = expand_files(files, fd);
 	if (error < 0)
@@ -997,7 +989,6 @@ repeat:
 	 	 * If we needed to expand the fs array we
 		 * might have blocked - try again.
 		 */
-		error = -EMFILE;
 		goto repeat;
 	}
 
-- 
cgit v1.2.3


From 6a9436d0c3cbe8941b1acd5b0736d355295cad98 Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Sat, 26 Jul 2008 15:22:26 -0700
Subject: gpiolib: fix typo in comment

This fixes an off-by-one error in a comment.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/gpio.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index a3034d20ebd..c764a8fcb05 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -13,7 +13,7 @@
  *
  * While the GPIO programming interface defines valid GPIO numbers
  * to be in the range 0..MAX_INT, this library restricts them to the
- * smaller range 0..ARCH_NR_GPIOS.
+ * smaller range 0..ARCH_NR_GPIOS-1.
  */
 
 #ifndef ARCH_NR_GPIOS
-- 
cgit v1.2.3


From b2d002dba5a8a4c0c3ec96fd1ff3c9def6bd71a1 Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Sat, 26 Jul 2008 15:22:27 -0700
Subject: task IO accounting: correctly account threads IO statistics

Oleg Nesterov points out that we should check that the task is still alive
before we iterate over the threads.  This patch includes a fixup for this.

Also simplify do_io_accounting() implementation.

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/base.c | 56 ++++++++++++++++++++++----------------------------------
 1 file changed, 22 insertions(+), 34 deletions(-)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index 81bce6791bf..d744aa3c9f7 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2406,35 +2406,18 @@ static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
 	u64 rchar, wchar, syscr, syscw;
 	struct task_io_accounting ioac;
 
-	if (!whole) {
-		rchar = task->rchar;
-		wchar = task->wchar;
-		syscr = task->syscr;
-		syscw = task->syscw;
-		memcpy(&ioac, &task->ioac, sizeof(ioac));
-	} else {
-		unsigned long flags;
-		struct task_struct *t = task;
-		rchar = wchar = syscr = syscw = 0;
-		memset(&ioac, 0, sizeof(ioac));
+	rchar = task->rchar;
+	wchar = task->wchar;
+	syscr = task->syscr;
+	syscw = task->syscw;
+	memcpy(&ioac, &task->ioac, sizeof(ioac));
 
-		rcu_read_lock();
-		do {
-			rchar += t->rchar;
-			wchar += t->wchar;
-			syscr += t->syscr;
-			syscw += t->syscw;
-
-			ioac.read_bytes += t->ioac.read_bytes;
-			ioac.write_bytes += t->ioac.write_bytes;
-			ioac.cancelled_write_bytes +=
-					t->ioac.cancelled_write_bytes;
-			t = next_thread(t);
-		} while (t != task);
-		rcu_read_unlock();
+	if (whole) {
+		unsigned long flags;
 
 		if (lock_task_sighand(task, &flags)) {
 			struct signal_struct *sig = task->signal;
+			struct task_struct *t = task;
 
 			rchar += sig->rchar;
 			wchar += sig->wchar;
@@ -2445,11 +2428,20 @@ static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
 			ioac.write_bytes += sig->ioac.write_bytes;
 			ioac.cancelled_write_bytes +=
 					sig->ioac.cancelled_write_bytes;
-
+			while_each_thread(task, t) {
+				rchar += t->rchar;
+				wchar += t->wchar;
+				syscr += t->syscr;
+				syscw += t->syscw;
+
+				ioac.read_bytes += t->ioac.read_bytes;
+				ioac.write_bytes += t->ioac.write_bytes;
+				ioac.cancelled_write_bytes +=
+					t->ioac.cancelled_write_bytes;
+			}
 			unlock_task_sighand(task, &flags);
 		}
 	}
-
 	return sprintf(buffer,
 			"rchar: %llu\n"
 			"wchar: %llu\n"
@@ -2458,13 +2450,9 @@ static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
 			"read_bytes: %llu\n"
 			"write_bytes: %llu\n"
 			"cancelled_write_bytes: %llu\n",
-			(unsigned long long)rchar,
-			(unsigned long long)wchar,
-			(unsigned long long)syscr,
-			(unsigned long long)syscw,
-			(unsigned long long)ioac.read_bytes,
-			(unsigned long long)ioac.write_bytes,
-			(unsigned long long)ioac.cancelled_write_bytes);
+			rchar, wchar, syscr, syscw,
+			ioac.read_bytes, ioac.write_bytes,
+			ioac.cancelled_write_bytes);
 }
 
 static int proc_tid_io_accounting(struct task_struct *task, char *buffer)
-- 
cgit v1.2.3


From 510a35d4a47802f4a0028aa6bd2ca2170da5e32f Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Sat, 26 Jul 2008 15:22:27 -0700
Subject: hugetlb: remove unused variable warning

Remove the following warning when CONFIG_HUGETLB_PAGE is not set:

	ipc/shm.c: In function `shm_get_stat':
	ipc/shm.c:565: warning: unused variable `h'

[akpm@linux-foundation.org: use tabs, not spaces]
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/hugetlb.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 9a71d4cc88c..32e0ef0f6e1 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -273,7 +273,10 @@ struct hstate {};
 #define huge_page_mask(h) PAGE_MASK
 #define huge_page_order(h) 0
 #define huge_page_shift(h) PAGE_SHIFT
-#define pages_per_huge_page(h) 1
+static inline unsigned int pages_per_huge_page(struct hstate *h)
+{
+	return 1;
+}
 #endif
 
 #endif /* _LINUX_HUGETLB_H */
-- 
cgit v1.2.3


From 3b8f14b41026fb7d7e9a4af2a4128a702d07ad26 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Sat, 26 Jul 2008 15:22:28 -0700
Subject: mm/util.c must #include <linux/sched.h>

mm/util.c: In function 'arch_pick_mmap_layout':
  mm/util.c:144: error: dereferencing pointer to incomplete type
  mm/util.c:145: error: 'arch_get_unmapped_area' undeclared (first use in this function)
  mm/util.c:145: error: (Each undeclared identifier is reported only once
  mm/util.c:145: error: for each function it appears in.)
  mm/util.c:146: error: 'arch_unmap_area' undeclared (first use in this function)

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/util.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/util.c b/mm/util.c
index 0efd83097ec..d8d02210e06 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -3,6 +3,7 @@
 #include <linux/string.h>
 #include <linux/module.h>
 #include <linux/err.h>
+#include <linux/sched.h>
 #include <asm/uaccess.h>
 
 /**
-- 
cgit v1.2.3


From 78681ac08a611313595d13cafabae1183b71ef48 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Sat, 26 Jul 2008 15:22:28 -0700
Subject: firmware: fix memmap printk format warnings

Fix firmware/memmap printk format warnings:

  drivers/firmware/memmap.c:156: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'
  drivers/firmware/memmap.c:161: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/firmware/memmap.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index e23399c7f77..001622eb86f 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -153,12 +153,14 @@ int __init firmware_map_add_early(resource_size_t start, resource_size_t end,
 
 static ssize_t start_show(struct firmware_map_entry *entry, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "0x%llx\n", entry->start);
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->start);
 }
 
 static ssize_t end_show(struct firmware_map_entry *entry, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "0x%llx\n", entry->end);
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->end);
 }
 
 static ssize_t type_show(struct firmware_map_entry *entry, char *buf)
-- 
cgit v1.2.3


From 732730d48dc777f6577a6e0fece42b860324998e Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun, 27 Jul 2008 01:39:52 +0200
Subject: m68k: gs: use tty_port fixes

commit b5391e29f428d11755ca2c91074c6db6f5c69d7c ("gs: use tty_port")
forgot to update the m68k gs serial drivers.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ser_a2232.c | 52 +++++++++++++++++++++---------------------
 drivers/char/vme_scc.c   | 59 ++++++++++++++++++++++++------------------------
 2 files changed, 56 insertions(+), 55 deletions(-)

diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c
index 4ba3aec9e1c..7b0c35207d9 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/char/ser_a2232.c
@@ -192,7 +192,7 @@ static inline void a2232_receive_char(struct a2232_port *port, int ch, int err)
 	Maybe one could implement a more efficient version by not only
 	transferring one character at a time.
 */
-	struct tty_struct *tty = port->gs.tty;
+	struct tty_struct *tty = port->gs.port.tty;
 
 #if 0
 	switch(err) {
@@ -226,7 +226,7 @@ static void a2232_disable_tx_interrupts(void *ptr)
 
 	/* Does this here really have to be? */
 	local_irq_save(flags);
-	port->gs.flags &= ~GS_TX_INTEN;
+	port->gs.port.flags &= ~GS_TX_INTEN;
 	local_irq_restore(flags);
 }
 
@@ -242,7 +242,7 @@ static void a2232_enable_tx_interrupts(void *ptr)
 
 	/* Does this here really have to be? */
 	local_irq_save(flags);
-	port->gs.flags |= GS_TX_INTEN;
+	port->gs.port.flags |= GS_TX_INTEN;
 	local_irq_restore(flags);
 }
 
@@ -276,9 +276,9 @@ static void a2232_shutdown_port(void *ptr)
 
 	local_irq_save(flags);
 
-	port->gs.flags &= ~GS_ACTIVE;
+	port->gs.port.flags &= ~GS_ACTIVE;
 	
-	if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
+	if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) {
 		/* Set DTR and RTS to Low, flush output.
 		   The NetBSD driver "msc.c" does it this way. */
 		stat->Command = (	(stat->Command & ~A2232CMD_CMask) | 
@@ -309,7 +309,7 @@ static int  a2232_set_real_termios(void *ptr)
 	volatile struct a2232status *status;
 	volatile struct a2232memory *mem;
 
-	if (!port->gs.tty || !port->gs.tty->termios) return 0;
+	if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
 
 	status = a2232stat(port->which_a2232, port->which_port_on_a2232);
 	mem = a2232mem(port->which_a2232);
@@ -345,7 +345,7 @@ static int  a2232_set_real_termios(void *ptr)
 	}
 	a2232_param |= rate;
 
-	cflag  = port->gs.tty->termios->c_cflag;
+	cflag  = port->gs.port.tty->termios->c_cflag;
 
 	// get character size
 	chsize = cflag & CSIZE;
@@ -382,7 +382,7 @@ static int  a2232_set_real_termios(void *ptr)
 		the conventional way of inserting START/STOP characters
 		by hand in throttle()/unthrottle().
 	*/
-	softflow = !!( port->gs.tty->termios->c_iflag & IXOFF );
+	softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF );
 
 	// get Parity (Enabled/Disabled? If Enabled, Odd or Even?)
 	parity = cflag & (PARENB | PARODD);
@@ -400,9 +400,9 @@ static int  a2232_set_real_termios(void *ptr)
 	/*	Hmm. Maybe an own a2232_port structure
 		member would be cleaner?	*/
 	if (cflag & CLOCAL)
-		port->gs.flags &= ~ASYNC_CHECK_CD;
+		port->gs.port.flags &= ~ASYNC_CHECK_CD;
 	else
-		port->gs.flags |= ASYNC_CHECK_CD;
+		port->gs.port.flags |= ASYNC_CHECK_CD;
 
 
 	/* Now we have all parameters and can go to set them: */
@@ -482,18 +482,18 @@ static int  a2232_open(struct tty_struct * tty, struct file * filp)
 	port = &a2232_ports[line];
 	
 	tty->driver_data = port;
-	port->gs.tty = tty;
-	port->gs.count++;
+	port->gs.port.tty = tty;
+	port->gs.port.count++;
 	retval = gs_init_port(&port->gs);
 	if (retval) {
-		port->gs.count--;
+		port->gs.port.count--;
 		return retval;
 	}
-	port->gs.flags |= GS_ACTIVE;
+	port->gs.port.flags |= GS_ACTIVE;
 	retval = gs_block_til_ready(port, filp);
 
 	if (retval) {
-		port->gs.count--;
+		port->gs.port.count--;
 		return retval;
 	}
 
@@ -522,7 +522,7 @@ int ch, err, n, p;
 		for (p = 0; p < NUMLINES; p++){	/* for every port on this board */
 			err = 0;
 			port = &a2232_ports[n*NUMLINES+p];
-			if ( port->gs.flags & GS_ACTIVE ){ /* if the port is used */
+			if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */
 
 				status = a2232stat(n,p);
 
@@ -577,8 +577,8 @@ int ch, err, n, p;
 				obuf = mem->OutBuf[p];
 				bufpos = status->OutHead;
 				while ( (port->gs.xmit_cnt > 0)		&&
-					(!port->gs.tty->stopped)	&&
-					(!port->gs.tty->hw_stopped) ){	/* While there are chars to transmit */
+					(!port->gs.port.tty->stopped)	&&
+					(!port->gs.port.tty->hw_stopped) ){	/* While there are chars to transmit */
 					if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */
 						ch = port->gs.xmit_buf[port->gs.xmit_tail];					/* get the next char to transmit */
 						port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */
@@ -592,8 +592,8 @@ int ch, err, n, p;
 				status->OutHead = bufpos;
 					
 				/* WakeUp if output buffer runs low */
-				if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) {
-					tty_wakeup(port->gs.tty);
+				if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) {
+					tty_wakeup(port->gs.port.tty);
 				}
 			} // if the port is used
 		} // for every port on the board
@@ -613,16 +613,16 @@ int ch, err, n, p;
 						struct a2232_port *port = &a2232_ports[n*7+p];
 						port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */
 
-						if (!(port->gs.flags & ASYNC_CHECK_CD))
+						if (!(port->gs.port.flags & ASYNC_CHECK_CD))
 							;	/* Don't report DCD changes */
 						else if (port->cd_status) { // if DCD on: DCD went UP!
 							
 							/* Are we blocking in open?*/
-							wake_up_interruptible(&port->gs.open_wait);
+							wake_up_interruptible(&port->gs.port.open_wait);
 						}
 						else { // if DCD off: DCD went DOWN!
-							if (port->gs.tty)
-								tty_hangup (port->gs.tty);
+							if (port->gs.port.tty)
+								tty_hangup (port->gs.port.tty);
 						}
 						
 					} // if CD changed for this port
@@ -655,8 +655,8 @@ static void a2232_init_portstructs(void)
 #ifdef NEW_WRITE_LOCKING
 		mutex_init(&(port->gs.port_write_mutex));
 #endif
-		init_waitqueue_head(&port->gs.open_wait);
-		init_waitqueue_head(&port->gs.close_wait);
+		init_waitqueue_head(&port->gs.port.open_wait);
+		init_waitqueue_head(&port->gs.port.close_wait);
 	}
 }
 
diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c
index 69c5afe97f1..1718b3c481d 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/char/vme_scc.c
@@ -183,8 +183,8 @@ static void scc_init_portstructs(void)
 #ifdef NEW_WRITE_LOCKING
 		port->gs.port_write_mutex = MUTEX;
 #endif
-		init_waitqueue_head(&port->gs.open_wait);
-		init_waitqueue_head(&port->gs.close_wait);
+		init_waitqueue_head(&port->gs.port.open_wait);
+		init_waitqueue_head(&port->gs.port.close_wait);
 	}
 }
 
@@ -422,7 +422,7 @@ static irqreturn_t scc_rx_int(int irq, void *data)
 {
 	unsigned char	ch;
 	struct scc_port *port = data;
-	struct tty_struct *tty = port->gs.tty;
+	struct tty_struct *tty = port->gs.port.tty;
 	SCC_ACCESS_INIT(port);
 
 	ch = SCCread_NB(RX_DATA_REG);
@@ -453,7 +453,7 @@ static irqreturn_t scc_rx_int(int irq, void *data)
 static irqreturn_t scc_spcond_int(int irq, void *data)
 {
 	struct scc_port *port = data;
-	struct tty_struct *tty = port->gs.tty;
+	struct tty_struct *tty = port->gs.port.tty;
 	unsigned char	stat, ch, err;
 	int		int_pending_mask = port->channel == CHANNEL_A ?
 			                   IPR_A_RX : IPR_B_RX;
@@ -500,7 +500,7 @@ static irqreturn_t scc_tx_int(int irq, void *data)
 	struct scc_port *port = data;
 	SCC_ACCESS_INIT(port);
 
-	if (!port->gs.tty) {
+	if (!port->gs.port.tty) {
 		printk(KERN_WARNING "scc_tx_int with NULL tty!\n");
 		SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 		SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
@@ -512,8 +512,9 @@ static irqreturn_t scc_tx_int(int irq, void *data)
 			SCCwrite(TX_DATA_REG, port->x_char);
 			port->x_char = 0;
 		}
-		else if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
-				port->gs.tty->hw_stopped)
+		else if ((port->gs.xmit_cnt <= 0) ||
+			 port->gs.port.tty->stopped ||
+			 port->gs.port.tty->hw_stopped)
 			break;
 		else {
 			SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
@@ -522,15 +523,15 @@ static irqreturn_t scc_tx_int(int irq, void *data)
 				break;
 		}
 	}
-	if ((port->gs.xmit_cnt <= 0) || port->gs.tty->stopped ||
-			port->gs.tty->hw_stopped) {
+	if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped ||
+	    port->gs.port.tty->hw_stopped) {
 		/* disable tx interrupts */
 		SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 		SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);   /* disable tx_int on next tx underrun? */
-		port->gs.flags &= ~GS_TX_INTEN;
+		port->gs.port.flags &= ~GS_TX_INTEN;
 	}
-	if (port->gs.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
-		tty_wakeup(port->gs.tty);
+	if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
+		tty_wakeup(port->gs.port.tty);
 
 	SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 	return IRQ_HANDLED;
@@ -550,14 +551,14 @@ static irqreturn_t scc_stat_int(int irq, void *data)
 
 	if (changed & SR_DCD) {
 		port->c_dcd = !!(sr & SR_DCD);
-		if (!(port->gs.flags & ASYNC_CHECK_CD))
+		if (!(port->gs.port.flags & ASYNC_CHECK_CD))
 			;	/* Don't report DCD changes */
 		else if (port->c_dcd) {
-			wake_up_interruptible(&port->gs.open_wait);
+			wake_up_interruptible(&port->gs.port.open_wait);
 		}
 		else {
-			if (port->gs.tty)
-				tty_hangup (port->gs.tty);
+			if (port->gs.port.tty)
+				tty_hangup (port->gs.port.tty);
 		}
 	}
 	SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
@@ -578,7 +579,7 @@ static void scc_disable_tx_interrupts(void *ptr)
 
 	local_irq_save(flags);
 	SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
-	port->gs.flags &= ~GS_TX_INTEN;
+	port->gs.port.flags &= ~GS_TX_INTEN;
 	local_irq_restore(flags);
 }
 
@@ -636,8 +637,8 @@ static void scc_shutdown_port(void *ptr)
 {
 	struct scc_port *port = ptr;
 
-	port->gs.flags &= ~ GS_ACTIVE;
-	if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
+	port->gs.port.flags &= ~ GS_ACTIVE;
+	if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) {
 		scc_setsignals (port, 0, 0);
 	}
 }
@@ -652,14 +653,14 @@ static int scc_set_real_termios (void *ptr)
 	struct scc_port *port = ptr;
 	SCC_ACCESS_INIT(port);
 
-	if (!port->gs.tty || !port->gs.tty->termios) return 0;
+	if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
 
 	channel = port->channel;
 
 	if (channel == CHANNEL_A)
 		return 0;		/* Settings controlled by boot PROM */
 
-	cflag  = port->gs.tty->termios->c_cflag;
+	cflag  = port->gs.port.tty->termios->c_cflag;
 	baud = port->gs.baud;
 	chsize = (cflag & CSIZE) >> 4;
 
@@ -678,9 +679,9 @@ static int scc_set_real_termios (void *ptr)
 	}
 
 	if (cflag & CLOCAL)
-		port->gs.flags &= ~ASYNC_CHECK_CD;
+		port->gs.port.flags &= ~ASYNC_CHECK_CD;
 	else
-		port->gs.flags |= ASYNC_CHECK_CD;
+		port->gs.port.flags |= ASYNC_CHECK_CD;
 
 #ifdef CONFIG_MVME147_SCC
 	if (MACH_IS_MVME147)
@@ -856,7 +857,7 @@ static int scc_open (struct tty_struct * tty, struct file * filp)
 		{ COMMAND_REG, CR_EXTSTAT_RESET },
 	};
 #endif
-	if (!(port->gs.flags & ASYNC_INITIALIZED)) {
+	if (!(port->gs.port.flags & ASYNC_INITIALIZED)) {
 		local_irq_save(flags);
 #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
 		if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
@@ -880,18 +881,18 @@ static int scc_open (struct tty_struct * tty, struct file * filp)
 	}
 
 	tty->driver_data = port;
-	port->gs.tty = tty;
-	port->gs.count++;
+	port->gs.port.tty = tty;
+	port->gs.port.count++;
 	retval = gs_init_port(&port->gs);
 	if (retval) {
-		port->gs.count--;
+		port->gs.port.count--;
 		return retval;
 	}
-	port->gs.flags |= GS_ACTIVE;
+	port->gs.port.flags |= GS_ACTIVE;
 	retval = gs_block_til_ready(port, filp);
 
 	if (retval) {
-		port->gs.count--;
+		port->gs.port.count--;
 		return retval;
 	}
 
-- 
cgit v1.2.3


From 852fef69c0d9510a28a70221cfddd004efa02552 Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oliver@neukum.org>
Date: Sat, 26 Jul 2008 22:42:42 +0200
Subject: fix for a memory leak in an error case introduced by fix for double
 free

The fix NULLed a pointer without freeing it.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Reported-by: Juha Motorsportcom <juha_motorsportcom@luukku.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ipaq.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 832a5a4f3cb..cd9a2e138c8 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -651,15 +651,17 @@ static int ipaq_open(struct tty_struct *tty,
 	 */
 
 	kfree(port->bulk_in_buffer);
+	kfree(port->bulk_out_buffer);
+	/* make sure the generic serial code knows */
+	port->bulk_out_buffer = NULL;
+
 	port->bulk_in_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
-	if (port->bulk_in_buffer == NULL) {
-		port->bulk_out_buffer = NULL; /* prevent double free */
+	if (port->bulk_in_buffer == NULL)
 		goto enomem;
-	}
 
-	kfree(port->bulk_out_buffer);
 	port->bulk_out_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
 	if (port->bulk_out_buffer == NULL) {
+		/* the buffer is useless, free it */
 		kfree(port->bulk_in_buffer);
 		port->bulk_in_buffer = NULL;
 		goto enomem;
-- 
cgit v1.2.3


From 6aa1e464453e398e4ab12558777fb10cff8a284d Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 22 Jul 2008 20:21:28 +0300
Subject: ALSA: sound/pci/azt3328.h: no variables for enums

AZF_FREQUENCIES and AZF_GAME_CONFIGS were variables, and this doesn't
seem to have been intended.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/azt3328.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/azt3328.h b/sound/pci/azt3328.h
index 7e3e8942d07..974e05122f0 100644
--- a/sound/pci/azt3328.h
+++ b/sound/pci/azt3328.h
@@ -94,7 +94,7 @@ enum azf_freq_t {
   AZF_FREQ(48000),
   AZF_FREQ(66200),
 #undef AZF_FREQ
-} AZF_FREQUENCIES;
+};
 
 /** recording area (see also: playback bit flag definitions) **/
 #define IDX_IO_REC_FLAGS	0x20 /* ??, PU:0x0000 */
@@ -210,7 +210,7 @@ enum azf_freq_t {
 
 enum {
 	AZF_GAME_LEGACY_IO_PORT = 0x200
-} AZF_GAME_CONFIGS;
+};
 
 #define IDX_GAME_LEGACY_COMPATIBLE	0x00
 	/* in some operation mode, writing anything to this port
-- 
cgit v1.2.3


From 13c2108de4437771a77f775fe33e9a33c53a8a14 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 22 Jul 2008 20:21:32 +0300
Subject: ALSA: make snd_ac97_add_vmaster() static

This patch makes the needlessly global snd_ac97_add_vmaster() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/ac97/ac97_patch.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 0746e9ccc20..f4fbc795ee8 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -3381,8 +3381,8 @@ static struct snd_kcontrol *snd_ac97_find_mixer_ctl(struct snd_ac97 *ac97,
 }
 
 /* create a virtual master control and add slaves */
-int snd_ac97_add_vmaster(struct snd_ac97 *ac97, char *name,
-			 const unsigned int *tlv, const char **slaves)
+static int snd_ac97_add_vmaster(struct snd_ac97 *ac97, char *name,
+				const unsigned int *tlv, const char **slaves)
 {
 	struct snd_kcontrol *kctl;
 	const char **s;
-- 
cgit v1.2.3


From fe7e873f52f17ad9b8ee9e2c70acaddcae22443b Mon Sep 17 00:00:00 2001
From: Travis Place <wishie@wishie.net>
Date: Sun, 27 Jul 2008 10:13:26 +0200
Subject: ALSA: hda - Add automatic model setting for the Acer Aspire 5920G
 laptop

Make the Acer Aspire 5920G (1025:0121) select ALC883_ACER_ASPIRE
by default.

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index f1cdce4c8a6..add4e87e0b2 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7907,6 +7907,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_ACER_ASPIRE),
 	SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_ACER_ASPIRE),
 	SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_ACER_ASPIRE),
+	SND_PCI_QUIRK(0x1025, 0x0121, "Acer Aspire 5920G", ALC883_ACER_ASPIRE), 
 	SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */
 	SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
 	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
-- 
cgit v1.2.3


From b15ebe2616289da258f85b3ff142fca237ef9f59 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 23 Jul 2008 07:48:49 +0200
Subject: ALSA: cs4232: fix crash during chip PNP detection

The acard->wss pointer is uninitialized in this function
which leads to crash during chip PNP detection.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/isa/cs423x/cs4236.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index dbe63db4bfd..4d4b8ddc26b 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -325,6 +325,7 @@ static int __devinit snd_cs423x_pnp_init_mpu(int dev, struct pnp_dev *pdev)
 static int __devinit snd_card_cs4232_pnp(int dev, struct snd_card_cs4236 *acard,
 					 struct pnp_dev *pdev)
 {
+	acard->wss = pdev;
 	if (snd_cs423x_pnp_init_wss(dev, acard->wss) < 0)
 		return -EBUSY;
 	cport[dev] = -1;
-- 
cgit v1.2.3


From 536319afd1f25383009c0c88f6fb00104f49c178 Mon Sep 17 00:00:00 2001
From: Nicolas Boichat <nicolas@boichat.ch>
Date: Mon, 21 Jul 2008 22:18:01 +0800
Subject: ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel
 (sigmatel).

Currently, even if you pass model=intel-mac-v3 as a module parameter to
snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still
try to auto-detect the model type. This is a problem on my MacBook Pro 1st
generation, which needs intel-mac-v3, but sometimes incorrectly reports
0x00000100 as subsystem id, which causes the switch in patch_stac922x to
select intel-mac-v4.

To fix this, I added a new model called intel-mac-auto, so in case no
module parameter is passed, and an Intel Mac board is detected, the
model will be automatically detected, while no detection will be done
if the model is forced to intel-mac-v3.

This problem has been around for quite a while, and I used to fix it
by moving the case statement for 0x00000100 in patch_stac922x so that
intel-mac-v3 is chosen.

Another way to fix the problem would be to check if a module parameter
was set directly in patch_stac922x, using something like this:
if (spec->board_config == STAC_INTEL_MAC_V3 &&
	!codec->bus->modelname) {

But I think it is less elegant (if you prefer that way, I can prepare a
patch).

Signed-off-by: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 Documentation/sound/alsa/ALSA-Configuration.txt |  1 +
 sound/pci/hda/patch_sigmatel.c                  | 14 +++++++++++---
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 72aff61e731..6f6d117ac7e 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1024,6 +1024,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  intel-mac-v3	Intel Mac Type 3
 	  intel-mac-v4	Intel Mac Type 4
 	  intel-mac-v5	Intel Mac Type 5
+	  intel-mac-auto Intel Mac (detect type according to subsystem id)
 	  macmini	Intel Mac Mini (equivalent with type 3)
 	  macbook	Intel Mac Book (eq. type 5)
 	  macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 08cb77f5188..7fdafcb0015 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -94,6 +94,9 @@ enum {
 	STAC_INTEL_MAC_V3,
 	STAC_INTEL_MAC_V4,
 	STAC_INTEL_MAC_V5,
+	STAC_INTEL_MAC_AUTO, /* This model is selected if no module parameter
+			      * is given, one of the above models will be
+			      * chosen according to the subsystem id. */
 	/* for backward compatibility */
 	STAC_MACMINI,
 	STAC_MACBOOK,
@@ -1483,6 +1486,7 @@ static unsigned int *stac922x_brd_tbl[STAC_922X_MODELS] = {
 	[STAC_INTEL_MAC_V3] = intel_mac_v3_pin_configs,
 	[STAC_INTEL_MAC_V4] = intel_mac_v4_pin_configs,
 	[STAC_INTEL_MAC_V5] = intel_mac_v5_pin_configs,
+	[STAC_INTEL_MAC_AUTO] = intel_mac_v3_pin_configs,
 	/* for backward compatibility */
 	[STAC_MACMINI] = intel_mac_v3_pin_configs,
 	[STAC_MACBOOK] = intel_mac_v5_pin_configs,
@@ -1505,6 +1509,7 @@ static const char *stac922x_models[STAC_922X_MODELS] = {
 	[STAC_INTEL_MAC_V3] = "intel-mac-v3",
 	[STAC_INTEL_MAC_V4] = "intel-mac-v4",
 	[STAC_INTEL_MAC_V5] = "intel-mac-v5",
+	[STAC_INTEL_MAC_AUTO] = "intel-mac-auto",
 	/* for backward compatibility */
 	[STAC_MACMINI]	= "macmini",
 	[STAC_MACBOOK]	= "macbook",
@@ -1576,9 +1581,9 @@ static struct snd_pci_quirk stac922x_cfg_tbl[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x0707,
 		      "Intel D945P", STAC_D945GTP5),
 	/* other systems  */
-	/* Apple Mac Mini (early 2006) */
+	/* Apple Intel Mac (Mac Mini, MacBook, MacBook Pro...) */
 	SND_PCI_QUIRK(0x8384, 0x7680,
-		      "Mac Mini", STAC_INTEL_MAC_V3),
+		      "Mac", STAC_INTEL_MAC_AUTO),
 	/* Dell systems  */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01a7,
 		      "unknown Dell", STAC_922X_DELL_D81),
@@ -3725,7 +3730,7 @@ static int patch_stac922x(struct hda_codec *codec)
 	spec->board_config = snd_hda_check_board_config(codec, STAC_922X_MODELS,
 							stac922x_models,
 							stac922x_cfg_tbl);
-	if (spec->board_config == STAC_INTEL_MAC_V3) {
+	if (spec->board_config == STAC_INTEL_MAC_AUTO) {
 		spec->gpio_mask = spec->gpio_dir = 0x03;
 		spec->gpio_data = 0x03;
 		/* Intel Macs have all same PCI SSID, so we need to check
@@ -3757,6 +3762,9 @@ static int patch_stac922x(struct hda_codec *codec)
 		case 0x106b2200:
 			spec->board_config = STAC_INTEL_MAC_V5;
 			break;
+		default:
+			spec->board_config = STAC_INTEL_MAC_V3;
+			break;
 		}
 	}
 
-- 
cgit v1.2.3


From 5f4cb662a0a2533b45656607471571460310a5ca Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 14 Jul 2008 20:36:36 +0200
Subject: KVM: SVM: allow enabling/disabling NPT by reloading only the
 architecture module

If NPT is enabled after loading both KVM modules on AMD and it should be
disabled, both KVM modules must be reloaded. If only the architecture module is
reloaded the behavior is undefined. With this patch it is possible to disable
NPT only by reloading the kvm_amd module.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/mmu.c         | 6 ++++++
 arch/x86/kvm/svm.c         | 3 ++-
 include/asm-x86/kvm_host.h | 1 +
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index b0e4ddca6c1..d087d9c4f2d 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1870,6 +1870,12 @@ void kvm_enable_tdp(void)
 }
 EXPORT_SYMBOL_GPL(kvm_enable_tdp);
 
+void kvm_disable_tdp(void)
+{
+	tdp_enabled = false;
+}
+EXPORT_SYMBOL_GPL(kvm_disable_tdp);
+
 static void free_mmu_pages(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu_page *sp;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index b756e876dce..951b789cc91 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -453,7 +453,8 @@ static __init int svm_hardware_setup(void)
 	if (npt_enabled) {
 		printk(KERN_INFO "kvm: Nested Paging enabled\n");
 		kvm_enable_tdp();
-	}
+	} else
+		kvm_disable_tdp();
 
 	return 0;
 
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index fdde0bedaa9..bc34dc21f17 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -556,6 +556,7 @@ int kvm_fix_hypercall(struct kvm_vcpu *vcpu);
 int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code);
 
 void kvm_enable_tdp(void);
+void kvm_disable_tdp(void);
 
 int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
 int complete_pio(struct kvm_vcpu *vcpu);
-- 
cgit v1.2.3


From 98899aa0e0bf5de05850082be0eb837058c09ea5 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 16 Jul 2008 19:07:10 -0300
Subject: KVM: task switch: segment base is linear address

The segment base is always a linear address, so translate before
accessing guest memory.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/x86.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 9f1cdb011cf..cd687395e4e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3223,6 +3223,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu,
 static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
+	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -3232,13 +3233,16 @@ static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 		kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc);
 		return 1;
 	}
-	return kvm_read_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+	gpa += index * 8;
+	return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 /* allowed just for 8 bytes segments */
 static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
+	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -3246,7 +3250,9 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 
 	if (dtable.limit < index * 8 + 7)
 		return 1;
-	return kvm_write_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+	gpa += index * 8;
+	return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
@@ -3258,7 +3264,7 @@ static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
 	base_addr |= (seg_desc->base1 << 16);
 	base_addr |= (seg_desc->base2 << 24);
 
-	return base_addr;
+	return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
 }
 
 static int load_tss_segment32(struct kvm_vcpu *vcpu,
-- 
cgit v1.2.3


From 34198bf8426276a2ce1e97056a0f02d43637e5ae Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 16 Jul 2008 19:07:11 -0300
Subject: KVM: task switch: use seg regs provided by subarch instead of reading
 from GDT

There is no guarantee that the old TSS descriptor in the GDT contains
the proper base address. This is the case for Windows installation's
reboot-via-triplefault.

Use guest registers instead. Also translate the address properly.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/x86.c | 93 ++++++++++++++++++------------------------------------
 1 file changed, 30 insertions(+), 63 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index cd687395e4e..27c6ece91da 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3267,54 +3267,6 @@ static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
 	return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
 }
 
-static int load_tss_segment32(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_32 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_read_guest(vcpu->kvm, base_addr, tss,
-			      sizeof(struct tss_segment_32));
-}
-
-static int save_tss_segment32(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_32 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_write_guest(vcpu->kvm, base_addr, tss,
-			       sizeof(struct tss_segment_32));
-}
-
-static int load_tss_segment16(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_16 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_read_guest(vcpu->kvm, base_addr, tss,
-			      sizeof(struct tss_segment_16));
-}
-
-static int save_tss_segment16(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_16 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_write_guest(vcpu->kvm, base_addr, tss,
-			       sizeof(struct tss_segment_16));
-}
-
 static u16 get_segment_selector(struct kvm_vcpu *vcpu, int seg)
 {
 	struct kvm_segment kvm_seg;
@@ -3472,20 +3424,26 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu,
 }
 
 static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       struct desc_struct *cseg_desc,
+		       u32 old_tss_base,
 		       struct desc_struct *nseg_desc)
 {
 	struct tss_segment_16 tss_segment_16;
 	int ret = 0;
 
-	if (load_tss_segment16(vcpu, cseg_desc, &tss_segment_16))
+	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+			   sizeof tss_segment_16))
 		goto out;
 
 	save_state_to_tss16(vcpu, &tss_segment_16);
-	save_tss_segment16(vcpu, cseg_desc, &tss_segment_16);
 
-	if (load_tss_segment16(vcpu, nseg_desc, &tss_segment_16))
+	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+			    sizeof tss_segment_16))
 		goto out;
+
+	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+			   &tss_segment_16, sizeof tss_segment_16))
+		goto out;
+
 	if (load_state_from_tss16(vcpu, &tss_segment_16))
 		goto out;
 
@@ -3495,20 +3453,26 @@ out:
 }
 
 static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       struct desc_struct *cseg_desc,
+		       u32 old_tss_base,
 		       struct desc_struct *nseg_desc)
 {
 	struct tss_segment_32 tss_segment_32;
 	int ret = 0;
 
-	if (load_tss_segment32(vcpu, cseg_desc, &tss_segment_32))
+	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+			   sizeof tss_segment_32))
 		goto out;
 
 	save_state_to_tss32(vcpu, &tss_segment_32);
-	save_tss_segment32(vcpu, cseg_desc, &tss_segment_32);
 
-	if (load_tss_segment32(vcpu, nseg_desc, &tss_segment_32))
+	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+			    sizeof tss_segment_32))
+		goto out;
+
+	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+			   &tss_segment_32, sizeof tss_segment_32))
 		goto out;
+
 	if (load_state_from_tss32(vcpu, &tss_segment_32))
 		goto out;
 
@@ -3523,16 +3487,20 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	struct desc_struct cseg_desc;
 	struct desc_struct nseg_desc;
 	int ret = 0;
+	u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR);
+	u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR);
 
-	kvm_get_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+	old_tss_base = vcpu->arch.mmu.gva_to_gpa(vcpu, old_tss_base);
 
+	/* FIXME: Handle errors. Failure to read either TSS or their
+	 * descriptors should generate a pagefault.
+	 */
 	if (load_guest_segment_descriptor(vcpu, tss_selector, &nseg_desc))
 		goto out;
 
-	if (load_guest_segment_descriptor(vcpu, tr_seg.selector, &cseg_desc))
+	if (load_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc))
 		goto out;
 
-
 	if (reason != TASK_SWITCH_IRET) {
 		int cpl;
 
@@ -3550,8 +3518,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 
 	if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) {
 		cseg_desc.type &= ~(1 << 1); //clear the B flag
-		save_guest_segment_descriptor(vcpu, tr_seg.selector,
-					      &cseg_desc);
+		save_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc);
 	}
 
 	if (reason == TASK_SWITCH_IRET) {
@@ -3563,10 +3530,10 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	kvm_x86_ops->cache_regs(vcpu);
 
 	if (nseg_desc.type & 8)
-		ret = kvm_task_switch_32(vcpu, tss_selector, &cseg_desc,
+		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_base,
 					 &nseg_desc);
 	else
-		ret = kvm_task_switch_16(vcpu, tss_selector, &cseg_desc,
+		ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_base,
 					 &nseg_desc);
 
 	if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) {
-- 
cgit v1.2.3


From 577bdc496614ced56d999bbb425e85adf2386490 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@qumranet.com>
Date: Sat, 19 Jul 2008 08:57:05 +0300
Subject: KVM: Avoid instruction emulation when event delivery is pending

When an event (such as an interrupt) is injected, and the stack is
shadowed (and therefore write protected), the guest will exit.  The
current code will see that the stack is shadowed and emulate a few
instructions, each time postponing the injection.  Eventually the
injection may succeed, but at that time the guest may be unwilling
to accept the interrupt (for example, the TPR may have changed).

This occurs every once in a while during a Windows 2008 boot.

Fix by unshadowing the fault address if the fault was due to an event
injection.

Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/mmu.c | 1 +
 arch/x86/kvm/svm.c | 7 ++++++-
 arch/x86/kvm/vmx.c | 2 ++
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index d087d9c4f2d..2fa231923cf 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1814,6 +1814,7 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	return r;
 }
+EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
 
 void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 951b789cc91..e2ee264740c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1008,10 +1008,13 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	struct kvm *kvm = svm->vcpu.kvm;
 	u64 fault_address;
 	u32 error_code;
+	bool event_injection = false;
 
 	if (!irqchip_in_kernel(kvm) &&
-		is_external_interrupt(exit_int_info))
+	    is_external_interrupt(exit_int_info)) {
+		event_injection = true;
 		push_irq(&svm->vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK);
+	}
 
 	fault_address  = svm->vmcb->control.exit_info_2;
 	error_code = svm->vmcb->control.exit_info_1;
@@ -1025,6 +1028,8 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 			    (u32)fault_address, (u32)(fault_address >> 32),
 			    handler);
 
+	if (event_injection)
+		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 0cac6370171..b918fc83435 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2298,6 +2298,8 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		cr2 = vmcs_readl(EXIT_QUALIFICATION);
 		KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
 			    (u32)((u64)cr2 >> 32), handler);
+		if (vect_info & VECTORING_INFO_VALID_MASK)
+			kvm_mmu_unprotect_page_virt(vcpu, cr2);
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
 	}
 
-- 
cgit v1.2.3


From c93cd3a58845012df2d658fecd0ac99f7008d753 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Sat, 19 Jul 2008 19:08:07 -0300
Subject: KVM: task switch: translate guest segment limit to virt-extension
 byte granular field

If 'g' is one then limit is 4kb granular.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/x86.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 27c6ece91da..5916191420c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3184,6 +3184,10 @@ static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector,
 	kvm_desct->base |= seg_desc->base2 << 24;
 	kvm_desct->limit = seg_desc->limit0;
 	kvm_desct->limit |= seg_desc->limit << 16;
+	if (seg_desc->g) {
+		kvm_desct->limit <<= 12;
+		kvm_desct->limit |= 0xfff;
+	}
 	kvm_desct->selector = selector;
 	kvm_desct->type = seg_desc->type;
 	kvm_desct->present = seg_desc->p;
-- 
cgit v1.2.3


From 5ec5726a16245138f5d5305b00a752acb5730076 Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng.yang@intel.com>
Date: Wed, 16 Jul 2008 09:21:22 +0800
Subject: KVM: VMX: Fix bypass_guest_pf enabling when disable EPT in module
 parameter

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/vmx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index b918fc83435..f71151d999e 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3305,7 +3305,7 @@ static int __init vmx_init(void)
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP);
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP);
 
-	if (cpu_has_vmx_ept())
+	if (vm_need_ept())
 		bypass_guest_pf = 0;
 
 	if (bypass_guest_pf)
-- 
cgit v1.2.3


From 5fdbcb9dd16f1e89ead127d3ee1a38e3a00cf1ea Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng.yang@intel.com>
Date: Wed, 16 Jul 2008 09:25:40 +0800
Subject: KVM: VMX: Fix undefined beaviour of EPT after reload kvm-intel.ko

As well as move set base/mask ptes to vmx_init().

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/vmx.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f71151d999e..2a69773e3b2 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3118,15 +3118,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 		return ERR_PTR(-ENOMEM);
 
 	allocate_vpid(vmx);
-	if (id == 0 && vm_need_ept()) {
-		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
-			VMX_EPT_WRITABLE_MASK |
-			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
-		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
-				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
-				VMX_EPT_EXECUTABLE_MASK);
-		kvm_enable_tdp();
-	}
 
 	err = kvm_vcpu_init(&vmx->vcpu, kvm, id);
 	if (err)
@@ -3305,8 +3296,17 @@ static int __init vmx_init(void)
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP);
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP);
 
-	if (vm_need_ept())
+	if (vm_need_ept()) {
 		bypass_guest_pf = 0;
+		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
+			VMX_EPT_WRITABLE_MASK |
+			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
+		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
+				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+				VMX_EPT_EXECUTABLE_MASK);
+		kvm_enable_tdp();
+	} else
+		kvm_disable_tdp();
 
 	if (bypass_guest_pf)
 		kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull);
-- 
cgit v1.2.3


From cab7a1eeeb007be309cd99cf14407261a72d2418 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 22 Jul 2008 21:38:18 +0200
Subject: KVM: ia64: Fix irq disabling leak in error handling code

There is a call to local_irq_restore in the normal exit case, so it would
seem that there should be one on an error return as well.

The semantic patch that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression l;
expression E,E1,E2;
@@

local_irq_save(l);
... when != local_irq_restore(l)
    when != spin_unlock_irqrestore(E,l)
    when any
    when strict
(
if (...) { ... when != local_irq_restore(l)
               when != spin_unlock_irqrestore(E1,l)
+   local_irq_restore(l);
    return ...;
}
|
if (...)
+   {local_irq_restore(l);
    return ...;
+   }
|
spin_unlock_irqrestore(E2,l);
|
local_irq_restore(l);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/ia64/kvm/kvm-ia64.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 2672f4d278a..7a37d06376b 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -125,9 +125,9 @@ void kvm_arch_hardware_enable(void *garbage)
 				PAGE_KERNEL));
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+	local_irq_restore(saved_psr);
 	if (slot < 0)
 		return;
-	local_irq_restore(saved_psr);
 
 	spin_lock(&vp_lock);
 	status = ia64_pal_vp_init_env(kvm_vsa_base ?
@@ -160,9 +160,9 @@ void kvm_arch_hardware_disable(void *garbage)
 
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+	local_irq_restore(saved_psr);
 	if (slot < 0)
 		return;
-	local_irq_restore(saved_psr);
 
 	status = ia64_pal_vp_exit_env(host_iva);
 	if (status)
@@ -1253,6 +1253,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id)
 uninit:
 	kvm_vcpu_uninit(vcpu);
 fail:
+	local_irq_restore(psr);
 	return r;
 }
 
-- 
cgit v1.2.3


From 2bd0ac4eb469ef58c3b1746fccd15da871fc55c4 Mon Sep 17 00:00:00 2001
From: Carsten Otte <cotte@de.ibm.com>
Date: Fri, 25 Jul 2008 15:49:13 +0200
Subject: KVM: s390: Advertise KVM_CAP_USER_MEMORY

KVM_CAP_USER_MEMORY is used by s390, therefore, we should advertise it.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/s390/kvm/kvm-s390.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 1782cbcd282..fcd41795b55 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -112,7 +112,12 @@ long kvm_arch_dev_ioctl(struct file *filp,
 
 int kvm_dev_ioctl_check_extension(long ext)
 {
-	return 0;
+	switch (ext) {
+	case KVM_CAP_USER_MEMORY:
+		return 1;
+	default:
+		return 0;
+	}
 }
 
 /* Section: vm related */
-- 
cgit v1.2.3


From 99e65c92f2bbf84f43766a8bf701e36817d62822 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Fri, 25 Jul 2008 15:50:04 +0200
Subject: KVM: s390: Fix guest kconfig

Cornelia Huck noticed that a modular virtio without kvm guest support
leads to a build error in the s390 virtio transport:

CONFIG_VIRTIO=m leads to
ERROR: "vmem_add_mapping" [drivers/s390/kvm/kvm_virtio.ko] undefined!
ERROR: "max_pfn" [drivers/s390/kvm/kvm_virtio.ko] undefined!
ERROR: "vmem_remove_mapping" [drivers/s390/kvm/kvm_virtio.ko] undefined!

The virtio transport only works with kvm guest support and only as a
builtin. Lets change the build process of drivers/s390/kvm/kvm_virtio.c
to depend on kvm guest support, which is also a bool.

CONFIG_S390_GUEST already selects CONFIG_VIRTIO, that should prevent
CONFIG_S390_GUEST=y CONFIG_VIRTIO=n situations.

CC: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 drivers/s390/kvm/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/kvm/Makefile b/drivers/s390/kvm/Makefile
index 4a5ec39f9ca..0815690ac1e 100644
--- a/drivers/s390/kvm/Makefile
+++ b/drivers/s390/kvm/Makefile
@@ -6,4 +6,4 @@
 # it under the terms of the GNU General Public License (version 2 only)
 # as published by the Free Software Foundation.
 
-obj-$(CONFIG_VIRTIO) += kvm_virtio.o
+obj-$(CONFIG_S390_GUEST) += kvm_virtio.o
-- 
cgit v1.2.3


From 0096369daa9eaaef1a309e5d8167b023af3f998d Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 25 Jul 2008 15:51:00 +0200
Subject: KVM: s390: Change guestaddr type in gaccess

All registers are unsigned long types. This patch changes all occurences
of guestaddr in gaccess from u64 to unsigned long.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/s390/kvm/gaccess.h     | 62 ++++++++++++++++++++++++---------------------
 arch/s390/kvm/sigp.c        |  5 ++--
 include/asm-s390/kvm_host.h |  2 +-
 3 files changed, 37 insertions(+), 32 deletions(-)

diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index 4e0633c413f..ed60f3a74a8 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -18,11 +18,11 @@
 #include <asm/uaccess.h>
 
 static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
-					       u64 guestaddr)
+					       unsigned long guestaddr)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestaddr < 2 * PAGE_SIZE)
 		guestaddr += prefix;
@@ -37,7 +37,7 @@ static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
 	return (void __user *) guestaddr;
 }
 
-static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u64 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -47,10 +47,10 @@ static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
 	if (IS_ERR((void __force *) uptr))
 		return PTR_ERR((void __force *) uptr);
 
-	return get_user(*result, (u64 __user *) uptr);
+	return get_user(*result, (unsigned long __user *) uptr);
 }
 
-static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u32 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -63,7 +63,7 @@ static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u32 __user *) uptr);
 }
 
-static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u16 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -76,7 +76,7 @@ static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u16 __user *) uptr);
 }
 
-static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 			       u8 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -87,7 +87,7 @@ static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u8 __user *) uptr);
 }
 
-static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u64 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -100,7 +100,7 @@ static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u64 __user *) uptr);
 }
 
-static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u32 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -113,7 +113,7 @@ static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u32 __user *) uptr);
 }
 
-static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u16 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -126,7 +126,7 @@ static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u16 __user *) uptr);
 }
 
-static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 			       u8 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -138,7 +138,8 @@ static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
 }
 
 
-static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu,
+				       unsigned long guestdest,
 				       const void *from, unsigned long n)
 {
 	int rc;
@@ -153,12 +154,12 @@ static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
 	return 0;
 }
 
-static inline int copy_to_guest(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest(struct kvm_vcpu *vcpu, unsigned long guestdest,
 				const void *from, unsigned long n)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -189,7 +190,8 @@ slowpath:
 }
 
 static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
-					 u64 guestsrc, unsigned long n)
+					 unsigned long guestsrc,
+					 unsigned long n)
 {
 	int rc;
 	unsigned long i;
@@ -204,11 +206,11 @@ static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
 }
 
 static inline int copy_from_guest(struct kvm_vcpu *vcpu, void *to,
-				  u64 guestsrc, unsigned long n)
+				  unsigned long guestsrc, unsigned long n)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -238,11 +240,12 @@ slowpath:
 	return __copy_from_guest_slow(vcpu, to, guestsrc, n);
 }
 
-static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu,
+					 unsigned long guestdest,
 					 const void *from, unsigned long n)
 {
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestdest + n > memsize)
 		return -EFAULT;
@@ -256,10 +259,11 @@ static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
 }
 
 static inline int copy_from_guest_absolute(struct kvm_vcpu *vcpu, void *to,
-					   u64 guestsrc, unsigned long n)
+					   unsigned long guestsrc,
+					   unsigned long n)
 {
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestsrc + n > memsize)
 		return -EFAULT;
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 5a556114eaa..170392687ce 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -43,7 +43,8 @@
 #define SIGP_STAT_RECEIVER_CHECK    0x00000001UL
 
 
-static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
+static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
+			unsigned long *reg)
 {
 	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	int rc;
@@ -167,7 +168,7 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 }
 
 static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
-			     u64 *reg)
+			     unsigned long *reg)
 {
 	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	struct kvm_s390_local_interrupt *li;
diff --git a/include/asm-s390/kvm_host.h b/include/asm-s390/kvm_host.h
index 3234dd5b351..6583c0d6775 100644
--- a/include/asm-s390/kvm_host.h
+++ b/include/asm-s390/kvm_host.h
@@ -231,5 +231,5 @@ struct kvm_arch{
 	struct kvm_s390_float_interrupt float_int;
 };
 
-extern int sie64a(struct kvm_s390_sie_block *, __u64 *);
+extern int sie64a(struct kvm_s390_sie_block *, unsigned long *);
 #endif
-- 
cgit v1.2.3


From 3cd612998f17d5b3588be7f4937720411d247ff6 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Fri, 25 Jul 2008 15:51:54 +0200
Subject: KVM: s390: Fix program check on interrupt delivery handling

The current interrupt handling on s390 misbehaves on an error case. On s390
each cpu has the prefix area (lowcore) for interrupt delivery. This memory
must always be available. If we fail to access the prefix area for a guest
on interrupt delivery the configuration is completely unusable. There is no
point in sending another program interrupt to an inaccessible lowcore.
Furthermore, we should not bug the host kernel, because this can be triggered
by userspace. I think the guest kernel itself can not trigger the problem, as
SET PREFIX and SIGNAL PROCESSOR SET PREFIX both check that the memory is
available and sane. As this is a userspace bug (e.g. setting the wrong guest
offset, unmapping guest memory) we should kill the userspace process instead
of BUGing the host kernel.
In the long term we probably should notify the userspace process about this
problem.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/s390/kvm/interrupt.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 11230b0db95..2960702b482 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -13,6 +13,7 @@
 #include <asm/lowcore.h>
 #include <asm/uaccess.h>
 #include <linux/kvm_host.h>
+#include <linux/signal.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -246,15 +247,10 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 	default:
 		BUG();
 	}
-
 	if (exception) {
-		VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering"
-			   " interrupt");
-		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-		if (inti->type == KVM_S390_PROGRAM_INT) {
-			printk(KERN_WARNING "kvm: recursive program check\n");
-			BUG();
-		}
+		printk("kvm: The guest lowcore is not mapped during interrupt "
+			"delivery, killing userspace\n");
+		do_exit(SIGKILL);
 	}
 }
 
@@ -277,14 +273,11 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu)
 		__LC_EXT_NEW_PSW, sizeof(psw_t));
 	if (rc == -EFAULT)
 		exception = 1;
-
 	if (exception) {
-		VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering" \
-			   " ckc interrupt");
-		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-		return 0;
+		printk("kvm: The guest lowcore is not mapped during interrupt "
+			"delivery, killing userspace\n");
+		do_exit(SIGKILL);
 	}
-
 	return 1;
 }
 
-- 
cgit v1.2.3


From f5e10b09a5f8fc40666c95fe0cd6bcc2b8f11437 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Fri, 25 Jul 2008 15:52:44 +0200
Subject: KVM: s390: Fix instruction naming for lctlg

Lets fix the name for the lctlg instruction...

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/s390/kvm/intercept.c   | 8 ++++----
 arch/s390/kvm/kvm-s390.c    | 2 +-
 include/asm-s390/kvm_host.h | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 47a0b642174..f94da68a5c2 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -20,7 +20,7 @@
 #include "kvm-s390.h"
 #include "gaccess.h"
 
-static int handle_lctg(struct kvm_vcpu *vcpu)
+static int handle_lctlg(struct kvm_vcpu *vcpu)
 {
 	int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
 	int reg3 = vcpu->arch.sie_block->ipa & 0x000f;
@@ -30,7 +30,7 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
 	u64 useraddr;
 	int reg, rc;
 
-	vcpu->stat.instruction_lctg++;
+	vcpu->stat.instruction_lctlg++;
 	if ((vcpu->arch.sie_block->ipb & 0xff) != 0x2f)
 		return -ENOTSUPP;
 
@@ -40,7 +40,7 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
 
 	reg = reg1;
 
-	VCPU_EVENT(vcpu, 5, "lctg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
+	VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
 
 	do {
@@ -99,7 +99,7 @@ static intercept_handler_t instruction_handlers[256] = {
 	[0xae] = kvm_s390_handle_sigp,
 	[0xb2] = kvm_s390_handle_priv,
 	[0xb7] = handle_lctl,
-	[0xeb] = handle_lctg,
+	[0xeb] = handle_lctlg,
 };
 
 static int handle_noop(struct kvm_vcpu *vcpu)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index fcd41795b55..8b00eb2ddf5 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -39,7 +39,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "exit_instruction", VCPU_STAT(exit_instruction) },
 	{ "exit_program_interruption", VCPU_STAT(exit_program_interruption) },
 	{ "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) },
-	{ "instruction_lctg", VCPU_STAT(instruction_lctg) },
+	{ "instruction_lctlg", VCPU_STAT(instruction_lctlg) },
 	{ "instruction_lctl", VCPU_STAT(instruction_lctl) },
 	{ "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) },
 	{ "deliver_service_signal", VCPU_STAT(deliver_service_signal) },
diff --git a/include/asm-s390/kvm_host.h b/include/asm-s390/kvm_host.h
index 6583c0d6775..3c55e4107dc 100644
--- a/include/asm-s390/kvm_host.h
+++ b/include/asm-s390/kvm_host.h
@@ -111,7 +111,7 @@ struct kvm_vcpu_stat {
 	u32 exit_validity;
 	u32 exit_instruction;
 	u32 instruction_lctl;
-	u32 instruction_lctg;
+	u32 instruction_lctlg;
 	u32 exit_program_interruption;
 	u32 exit_instr_and_program;
 	u32 deliver_emergency_signal;
-- 
cgit v1.2.3


From 5a00a5e7a3e013b2323f87c1b69ff9557eae5ec9 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Fri, 25 Jul 2008 15:53:12 +0200
Subject: KVM: s390: Fix possible host kernel bug on lctl(g) handling

The lctl(g) instructions require a specific alignment for the parameters.
The architecture requires a specification program check if these alignments
are not used. Enforcing this alignment also removes a possible host BUG,
since the get_guest functions check for proper alignment and emits a BUG.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/s390/kvm/intercept.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index f94da68a5c2..61236102203 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -38,6 +38,9 @@ static int handle_lctlg(struct kvm_vcpu *vcpu)
 	if (base2)
 		useraddr += vcpu->arch.guest_gprs[base2];
 
+	if (useraddr & 7)
+		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
 	reg = reg1;
 
 	VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
@@ -74,6 +77,9 @@ static int handle_lctl(struct kvm_vcpu *vcpu)
 	if (base2)
 		useraddr += vcpu->arch.guest_gprs[base2];
 
+	if (useraddr & 3)
+		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
 	VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
 
-- 
cgit v1.2.3


From 6cab48602996cdbcb277375a8107d53e21e8c9b9 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Sun, 27 Jul 2008 04:23:31 +0100
Subject: [ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with
 IRQ_TYPE_*

IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1].
Remove them completely. Sed script for the reference:

s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g
s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g
s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g
s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g
s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g
s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g
s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g
s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_PROBE/IRQ_TYPE_PROBE/g
s/IRQT_NOEDGE/IRQ_TYPE_NONE/g

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 Documentation/arm/Interrupts                 | 10 ++----
 arch/arm/common/locomo.c                     | 10 +++---
 arch/arm/common/sa1111.c                     | 14 ++++----
 arch/arm/mach-at91/board-cap9adk.c           |  6 ++--
 arch/arm/mach-at91/irq.c                     |  8 ++---
 arch/arm/mach-ep93xx/core.c                  | 14 ++++----
 arch/arm/mach-imx/irq.c                      | 12 +++----
 arch/arm/mach-ixp2000/core.c                 |  8 ++---
 arch/arm/mach-ixp23xx/core.c                 | 10 +++---
 arch/arm/mach-ixp23xx/roadrunner.c           |  4 +--
 arch/arm/mach-ixp4xx/avila-pci.c             |  8 ++---
 arch/arm/mach-ixp4xx/common.c                | 10 +++---
 arch/arm/mach-ixp4xx/coyote-pci.c            |  4 +--
 arch/arm/mach-ixp4xx/dsmg600-pci.c           | 12 +++----
 arch/arm/mach-ixp4xx/fsg-pci.c               |  6 ++--
 arch/arm/mach-ixp4xx/gateway7001-pci.c       |  4 +--
 arch/arm/mach-ixp4xx/gtwx5715-pci.c          |  8 ++---
 arch/arm/mach-ixp4xx/ixdp425-pci.c           |  8 ++---
 arch/arm/mach-ixp4xx/ixdpg425-pci.c          |  4 +--
 arch/arm/mach-ixp4xx/nas100d-pci.c           | 10 +++---
 arch/arm/mach-ixp4xx/nslu2-pci.c             |  6 ++--
 arch/arm/mach-ixp4xx/wg302v2-pci.c           |  4 +--
 arch/arm/mach-ks8695/irq.c                   | 10 +++---
 arch/arm/mach-netx/generic.c                 |  8 ++---
 arch/arm/mach-omap1/board-osk.c              |  6 ++--
 arch/arm/mach-omap1/board-palmz71.c          |  4 +--
 arch/arm/mach-omap1/board-voiceblue.c        |  8 ++---
 arch/arm/mach-omap1/fpga.c                   |  2 +-
 arch/arm/mach-omap2/board-apollon.c          |  6 ++--
 arch/arm/mach-orion5x/db88f5281-setup.c      |  4 +--
 arch/arm/mach-orion5x/irq.c                  | 12 +++----
 arch/arm/mach-orion5x/rd88f5182-setup.c      |  4 +--
 arch/arm/mach-orion5x/ts209-setup.c          |  4 +--
 arch/arm/mach-pnx4008/irq.c                  | 10 +++---
 arch/arm/mach-pxa/cm-x270-pci.c              |  2 +-
 arch/arm/mach-pxa/lpd270.c                   |  2 +-
 arch/arm/mach-pxa/lubbock.c                  |  2 +-
 arch/arm/mach-pxa/mainstone.c                |  2 +-
 arch/arm/mach-pxa/sharpsl_pm.c               |  8 ++---
 arch/arm/mach-pxa/trizeps4.c                 |  2 +-
 arch/arm/mach-sa1100/cerf.c                  |  2 +-
 arch/arm/mach-sa1100/h3600.c                 |  2 +-
 arch/arm/mach-sa1100/irq.c                   |  8 ++---
 arch/arm/mach-sa1100/neponset.c              |  2 +-
 arch/arm/mach-sa1100/pleb.c                  |  2 +-
 arch/arm/plat-mxc/gpio.c                     | 10 +++---
 arch/arm/plat-omap/gpio.c                    | 28 ++++++++--------
 arch/arm/plat-s3c24xx/irq.c                  | 12 +++----
 drivers/ata/pata_ixp4xx_cf.c                 |  2 +-
 drivers/input/touchscreen/corgi_ts.c         |  8 ++---
 drivers/input/touchscreen/mainstone-wm97xx.c |  2 +-
 drivers/mfd/asic3.c                          | 14 ++++----
 drivers/mfd/tc6393xb.c                       |  2 +-
 drivers/pcmcia/soc_common.c                  | 12 +++----
 drivers/video/am200epd.c                     |  2 +-
 drivers/video/omap/sossi.c                   |  2 +-
 include/asm-arm/arch-pnx4008/irqs.h          | 48 ++++++++++++++--------------
 include/asm-arm/arch-pxa/idp.h               | 10 +++---
 include/asm-arm/arch-pxa/pcm990_baseboard.h  | 14 ++++----
 include/asm-arm/arch-sa1100/ide.h            |  2 +-
 include/asm-arm/irq.h                        | 17 ----------
 61 files changed, 227 insertions(+), 250 deletions(-)

diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts
index 0d3dbf1099b..c202ed35d7d 100644
--- a/Documentation/arm/Interrupts
+++ b/Documentation/arm/Interrupts
@@ -138,14 +138,8 @@ So, what's changed?
 
                 Set active the IRQ edge(s)/level.  This replaces the
                 SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
-                function.  Type should be one of the following:
-
-                #define IRQT_NOEDGE     (0)
-                #define IRQT_RISING     (__IRQT_RISEDGE)
-                #define IRQT_FALLING    (__IRQT_FALEDGE)
-                #define IRQT_BOTHEDGE   (__IRQT_RISEDGE|__IRQT_FALEDGE)
-                #define IRQT_LOW        (__IRQT_LOWLVL)
-                #define IRQT_HIGH       (__IRQT_HIGHLVL)
+                function.  Type should be one of IRQ_TYPE_xxx defined in
+		<linux/irq.h>
 
 3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.
 
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index c3c3a333904..85579654d3b 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type)
 
 	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= mask;
 	else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= mask;
 	else
 		GPIO_IRQ_falling_edge &= ~mask;
@@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	/*
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
-	set_irq_type(lchip->irq, IRQT_FALLING);
+	set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
 	set_irq_chip_data(lchip->irq, irqbase);
 	set_irq_chained_handler(lchip->irq, locomo_handler);
 
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 0a8e1ff2af8..f6d3fdda706 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip0 &= ~mask;
 	else
 		ip0 |= mask;
@@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip1 &= ~mask;
 	else
 		ip1 |= mask;
@@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	/*
 	 * Register SA1111 interrupt
 	 */
-	set_irq_type(sachip->irq, IRQT_RISING);
+	set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 	set_irq_data(sachip->irq, irqbase);
 	set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 8a2a958639d..b4b67eb1cbc 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void)
 	/* Serial */
 	at91_add_device_serial();
 	/* USB Host */
-	set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usbh(&cap9adk_usbh_data);
 	/* USB HS */
-	set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usba(&cap9adk_usba_udc_data);
 	/* SPI */
 	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
@@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* LCD Controller */
-	set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_lcdc(&cap9adk_lcdc_data);
 	/* AC97 */
 	at91_add_device_ac97(&cap9adk_ac97_data);
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 78a5cdb746d..ca87587b2b4 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -56,19 +56,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
 	unsigned int smr, srctype;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		srctype = AT91_AIC_SRCTYPE_HIGH;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_LOW;
 		else
 			return -EINVAL;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_FALLING;
 		else
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1d7bca6aa44..5fed5760850 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 		ep93xx_gpio_update_int_params(port);
 	}
@@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 
 	gpio_int_unmasked[port] &= ~port_mask;
@@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	gpio_direction_input(gpio);
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		gpio_int_type1[port] |= port_mask;
 		/* set initial polarity based on current input level */
 		if (gpio_get_value(gpio))
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index e6695c4e623..e1b1f028b93 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 	reg = irq >> 5;
 	bit = 1 << (irq % 32);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		/* Don't mess with enabled GPIOs using preconfigured edges or
 		   GPIOs set to alternate function during probe */
 		/* TODO: support probe */
@@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 //                      return 0;
 //              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
 //                      return 0;
-//              type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
 	GIUS(reg) |= bit;
@@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 
 	DEBUG_IRQ("setting type of irq %d to ", _irq);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		irq_type = 0x0;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		irq_type = 0x1;
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		irq_type = 0x3;
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		irq_type = 0x2;
 	}
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 81cdc826720..daf28074134 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
 	/*
 	 * Then, set the proper trigger type.
 	 */
-	if (type & IRQT_FALLING)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= 1 << line;
 	else
 		GPIO_IRQ_falling_edge &= ~(1 << line);
-	if (type & IRQT_RISING)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= 1 << line;
 	else
 		GPIO_IRQ_rising_edge &= ~(1 << line);
-	if (type & IRQT_LOW)
+	if (type & IRQ_TYPE_LEVEL_LOW)
 		GPIO_IRQ_level_low |= 1 << line;
 	else
 		GPIO_IRQ_level_low &= ~(1 << line);
-	if (type & IRQT_HIGH)
+	if (type & IRQ_TYPE_LEVEL_HIGH)
 		GPIO_IRQ_level_high |= 1 << line;
 	else
 		GPIO_IRQ_level_high &= ~(1 << line);
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 5fea5a13293..df16a4eac49 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -126,23 +126,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type) {
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index f0f70ba1e46..896ff9f840d 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 
 static void __init roadrunner_pci_preinit(void)
 {
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp23xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 3f867691d9f..c6e044befcc 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -30,10 +30,10 @@
 
 void __init avila_pci_preinit(void)
 {
-	set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3781b3db9f4..3947c506b4f 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type){
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index ad2e5b97966..be4f4a208b9 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -27,8 +27,8 @@
 
 void __init coyote_pci_preinit(void)
 {
-	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
-	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 9db7e1f4201..926d15f885f 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -25,12 +25,12 @@
 
 void __init dsmg600_pci_preinit(void)
 {
-	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index f19f3f6feda..ca12a9ca083 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -25,9 +25,9 @@
 
 void __init fsg_pci_preinit(void)
 {
-	set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index 6abf568322d..afd1dc14e59 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -29,8 +29,8 @@
 
 void __init gateway7001_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 49dec786880..20960704183 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -41,10 +41,10 @@
  */
 void __init gtwx5715_pci_preinit(void)
 {
-	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 40879600481..7d9bb4d2310 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -27,10 +27,10 @@
 
 void __init ixdp425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index d1e75b7dc3b..37d9f2e8f60 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -25,8 +25,8 @@
 
 void __init ixdpg425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index b8ebaf4a9c8..1088426fdce 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -24,11 +24,11 @@
 
 void __init nas100d_pci_preinit(void)
 {
-	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index 04661fef97f..4429b8448b6 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -24,9 +24,9 @@
 
 void __init nslu2_pci_preinit(void)
 {
-	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index 6588f2c758e..0f00feab67f 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -29,8 +29,8 @@
 
 void __init wg302v2_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 4c3ab43e104..0b06941a1ee 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type)
 	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
 
 	switch (type) {
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			mode = IOPC_TM_HIGH;
 			level_triggered = 1;
 			break;
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			mode = IOPC_TM_LOW;
 			level_triggered = 1;
 			break;
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			mode = IOPC_TM_RISING;
 			break;
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			mode = IOPC_TM_FALLING;
 			break;
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			mode = IOPC_TM_EDGE;
 			break;
 		default:
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index fd7537f7d11..99d4fb19a08 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type)
 
 	irq = _irq - NETX_IRQ_HIF_CHAINED(0);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		val |= (1 << 26) << irq;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		val |= (1 << 26) << irq;
 	}
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 845c66371ca..41f94f6fc15 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -288,7 +288,7 @@ static void __init osk_init_cf(void)
 		return;
 	}
 	/* the CF I/O IRQ is really active-low */
-	set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void __init osk_init_irq(void)
@@ -483,7 +483,7 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
 	gpio_request(4, "ts_int");
 	gpio_direction_input(4);
-	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING);
 
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
@@ -494,7 +494,7 @@ static void __init osk_mistral_init(void)
 		int ret = 0;
 
 		gpio_direction_input(OMAP_MPUIO(2));
-		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
+		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
 		 * button for more than wakeup from system sleep.
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e020c277460..34389b63b0e 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id)
 	if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
 		printk(KERN_INFO "PM: Power cable connected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_FALLING);
+				IRQ_TYPE_EDGE_FALLING);
 	} else {
 		printk(KERN_INFO "PM: Power cable disconnected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_RISING);
+				IRQ_TYPE_EDGE_RISING);
 	}
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 5c00b3f39cd..8948d45a276 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -186,10 +186,10 @@ static void __init voiceblue_init(void)
 	omap_request_gpio(13);
 	omap_request_gpio(14);
 	omap_request_gpio(15);
-	set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING);
 
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0cf62ef5ecb..d963125ed75 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void)
 	 */
 	omap_request_gpio(13);
 	omap_set_gpio_direction(13, 1);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 620fa0f120e..870b34972d3 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -337,17 +337,17 @@ static void __init apollon_sw_init(void)
 	omap_request_gpio(SW_DOWN_GPIO58);
 	omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
 
-	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
 				IRQF_SHARED, "enter sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
 				IRQF_SHARED, "up sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
 				IRQF_SHARED, "down sw",
 				&apollon_sw_interrupt))
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 88405e74e5e..40a0bee4fbb 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield "
 					"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e2a0084ab4a..9ae3f6dc783 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
 	desc = irq_desc + irq;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		/*
@@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		if (cause & (1 << pin)) {
 			irq = gpio_to_irq(pin);
 			desc = irq_desc + irq;
-			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 				/* Swap polarity (race with GPIO line) */
 				u32 polarity = readl(GPIO_IN_POL);
 				polarity ^= 1 << pin;
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 10ae6286426..2a46d27209c 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
 	if (gpio_request(pin, "PCI IntA") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
 	if (gpio_request(pin, "PCI IntB") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index a9cef9703d5..f270ada2def 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
 					"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 968d0b02759..5ed67e1947a 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -56,28 +56,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq)
 static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
 {
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/*rising edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*falling edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*low level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/* high level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
 
-	/* IRQT_BOTHEDGE is not supported */
+	/* IRQ_TYPE_EDGE_BOTH is not supported */
 	default:
 		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
 		return -1;
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index bcf0cde6ccc..31f5bd411ce 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -71,7 +71,7 @@ void __cmx270_pci_init_irq(int irq_gpio)
 
 	cmx270_it8152_irq_gpio = irq_gpio;
 
-	set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
+	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
 
 	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index cc1c4fa0614..8d1ab54e7b2 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index ac26423cd20..af7375bb46a 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -152,7 +152,7 @@ static void __init lubbock_init_irq(void)
 	}
 
 	set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 851ec2d9b69..c8e38b5ff1c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -191,7 +191,7 @@ static void __init mainstone_init_irq(void)
 	MST_INTSETCLR = 0;
 
 	set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 34cd585075b..23e9b928330 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void)
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
@@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void)
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index dee7bf36f01..12811b7aea0 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= TRIZEPS4_ETH_IRQ,
 		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= (IORESOURCE_IRQ | IRQT_RISING),
+		.flags	= (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
 	},
 };
 
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 31afe50d7cd..56d3ee01baa 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = {
 static void __init cerf_init_irq(void)
 {
 	sa1100_init_irq();
-	set_irq_type(CERF_ETH_IRQ, IRQT_RISING);
+	set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
 }
 
 static struct map_desc cerf_io_desc[] __initdata = {
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 8473c37b77d..b34ff42bbd7 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -834,7 +834,7 @@ static void __init h3800_init_irq(void)
 		set_irq_chip(irq, &h3800_gpio_irqchip);
 	}
 #endif
-	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
+	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index fa0403af7ee..c5e438b12ec 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type)
 	else
 		mask = GPIO11_27_MASK(irq);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		GPIO_IRQ_rising_edge |= mask;
 	} else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		GPIO_IRQ_falling_edge |= mask;
 	} else
 		GPIO_IRQ_falling_edge &= ~mask;
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 9f1ed150930..967a48454f6 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
 	/*
 	 * Install handler for GPIO25.
 	 */
-	set_irq_type(IRQ_GPIO25, IRQT_RISING);
+	set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
 
 	/*
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index c7bf7e0038f..69a71f11625 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -143,7 +143,7 @@ static void __init pleb_map_io(void)
 
 	GPDR &= ~GPIO_ETH0_IRQ;
 
-	set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING);
+	set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
 }
 
 MACHINE_START(PLEB, "PLEB")
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 4a7736717d8..318b268f938 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	void __iomem *reg = port->base;
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		edge = GPIO_INT_FALL_EDGE;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		edge = GPIO_INT_HIGH_LEV;
 		break;
-	default:	/* this includes IRQT_BOTHEDGE */
+	default:	/* this includes IRQ_TYPE_EDGE_BOTH */
 		return -EINVAL;
 	}
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d8e9c2c3f0f..63e094342ef 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 	u32 gpio_bit = 1 << gpio;
 
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-		trigger & __IRQT_LOWLVL);
+		trigger & IRQ_TYPE_LEVEL_LOW);
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-		trigger & __IRQT_HIGHLVL);
+		trigger & IRQ_TYPE_LEVEL_HIGH);
 	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-		trigger & __IRQT_RISEDGE);
+		trigger & IRQ_TYPE_EDGE_RISING);
 	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-		trigger & __IRQT_FALEDGE);
+		trigger & IRQ_TYPE_EDGE_FALLING);
 
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		if (trigger != 0)
@@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 		gpio &= 0x07;
 		l = __raw_readl(reg);
 		l &= ~(3 << (gpio << 1));
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 2 << (gpio << 1);
-		if (trigger & __IRQT_FALEDGE)
+		if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l |= 1 << (gpio << 1);
 		if (trigger)
 			/* Enable wake-up during idle for dynamic tick */
@@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
 	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
 	_set_gpio_irqenable(bank, gpio, 0);
 	_clear_gpio_irqstatus(bank, gpio);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
@@ -924,7 +924,7 @@ int omap_request_gpio(int gpio)
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
 	 */
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510) {
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index ae2c5d7efc9..001436c04b1 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
 	/* Set the external interrupt to pointed trigger type */
 	switch (type)
 	{
-		case IRQT_NOEDGE:
+		case IRQ_TYPE_NONE:
 			printk(KERN_WARNING "No edge setting!\n");
 			break;
 
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			newvalue = S3C2410_EXTINT_RISEEDGE;
 			break;
 
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			newvalue = S3C2410_EXTINT_FALLEDGE;
 			break;
 
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			newvalue = S3C2410_EXTINT_BOTHEDGE;
 			break;
 
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			newvalue = S3C2410_EXTINT_LOWLEV;
 			break;
 
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			newvalue = S3C2410_EXTINT_HILEV;
 			break;
 
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index de8d186f5ab..2014253f6c8 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -169,7 +169,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq)
-		set_irq_type(irq, IRQT_RISING);
+		set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
 
 	/* Setup expansion bus chip selects */
 	*data->cs0_cfg = data->cs0_bits;
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 4e9d8eece2e..d0e13fc4a88 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -195,7 +195,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
 {
 	if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) {
 		/* Disable Interrupt */
-		set_irq_type(corgi_ts->irq_gpio, IRQT_NOEDGE);
+		set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE);
 		if (read_xydata(corgi_ts)) {
 			corgi_ts->pendown = 1;
 			new_data(corgi_ts);
@@ -214,7 +214,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
 		}
 
 		/* Enable Falling Edge */
-		set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+		set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
 		corgi_ts->pendown = 0;
 	}
 }
@@ -258,7 +258,7 @@ static int corgits_resume(struct platform_device *dev)
 
 	corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
 	/* Enable Falling Edge */
-	set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+	set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
 	corgi_ts->power_mode = PWR_MODE_ACTIVE;
 
 	return 0;
@@ -333,7 +333,7 @@ static int __init corgits_probe(struct platform_device *pdev)
 	corgi_ts->power_mode = PWR_MODE_ACTIVE;
 
 	/* Enable Falling Edge */
-	set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+	set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
 
 	return 0;
 
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index a79f029b91c..590a1379aa3 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -198,7 +198,7 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
 		switch (wm->id) {
 		case WM9705_ID2:
 			wm->pen_irq = IRQ_GPIO(4);
-			set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE);
+			set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH);
 			break;
 		case WM9712_ID2:
 		case WM9713_ID2:
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index eabf0bfccab..c6408a62d95 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -256,28 +256,28 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
 				      bank + ASIC3_GPIO_TRIGGER_TYPE);
 	asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
 
-	if (type == IRQT_RISING) {
+	if (type == IRQ_TYPE_EDGE_RISING) {
 		trigger |= bit;
 		edge |= bit;
-	} else if (type == IRQT_FALLING) {
+	} else if (type == IRQ_TYPE_EDGE_FALLING) {
 		trigger |= bit;
 		edge &= ~bit;
-	} else if (type == IRQT_BOTHEDGE) {
+	} else if (type == IRQ_TYPE_EDGE_BOTH) {
 		trigger |= bit;
 		if (asic3_gpio_get(&asic->gpio, irq - asic->irq_base))
 			edge &= ~bit;
 		else
 			edge |= bit;
 		asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit;
-	} else if (type == IRQT_LOW) {
+	} else if (type == IRQ_TYPE_LEVEL_LOW) {
 		trigger &= ~bit;
 		level &= ~bit;
-	} else if (type == IRQT_HIGH) {
+	} else if (type == IRQ_TYPE_LEVEL_HIGH) {
 		trigger &= ~bit;
 		level |= bit;
 	} else {
 		/*
-		 * if type == IRQT_NOEDGE, we should mask interrupts, but
+		 * if type == IRQ_TYPE_NONE, we should mask interrupts, but
 		 * be careful to not unmask them if mask was also called.
 		 * Probably need internal state for mask.
 		 */
@@ -343,7 +343,7 @@ static int __init asic3_irq_probe(struct platform_device *pdev)
 			     ASIC3_INTMASK_GINTMASK);
 
 	set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
-	set_irq_type(asic->irq_nr, IRQT_RISING);
+	set_irq_type(asic->irq_nr, IRQ_TYPE_EDGE_RISING);
 	set_irq_data(asic->irq_nr, asic);
 
 	return 0;
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 2d87501b6fd..94e55e8e7ce 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -324,7 +324,7 @@ static void tc6393xb_attach_irq(struct platform_device *dev)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	set_irq_type(tc6393xb->irq, IRQT_FALLING);
+	set_irq_type(tc6393xb->irq, IRQ_TYPE_EDGE_FALLING);
 	set_irq_data(tc6393xb->irq, tc6393xb);
 	set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq);
 }
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 420a77540f4..8c21446996f 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -149,10 +149,10 @@ soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *stat
 		 */
 		if (skt->irq_state != 1 && state->io_irq) {
 			skt->irq_state = 1;
-			set_irq_type(skt->irq, IRQT_FALLING);
+			set_irq_type(skt->irq, IRQ_TYPE_EDGE_FALLING);
 		} else if (skt->irq_state == 1 && state->io_irq == 0) {
 			skt->irq_state = 0;
-			set_irq_type(skt->irq, IRQT_NOEDGE);
+			set_irq_type(skt->irq, IRQ_TYPE_NONE);
 		}
 
 		skt->cs_state = *state;
@@ -527,7 +527,7 @@ int soc_pcmcia_request_irqs(struct soc_pcmcia_socket *skt,
 				  IRQF_DISABLED, irqs[i].str, skt);
 		if (res)
 			break;
-		set_irq_type(irqs[i].irq, IRQT_NOEDGE);
+		set_irq_type(irqs[i].irq, IRQ_TYPE_NONE);
 	}
 
 	if (res) {
@@ -560,7 +560,7 @@ void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket *skt,
 
 	for (i = 0; i < nr; i++)
 		if (irqs[i].sock == skt->nr)
-			set_irq_type(irqs[i].irq, IRQT_NOEDGE);
+			set_irq_type(irqs[i].irq, IRQ_TYPE_NONE);
 }
 EXPORT_SYMBOL(soc_pcmcia_disable_irqs);
 
@@ -571,8 +571,8 @@ void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket *skt,
 
 	for (i = 0; i < nr; i++)
 		if (irqs[i].sock == skt->nr) {
-			set_irq_type(irqs[i].irq, IRQT_RISING);
-			set_irq_type(irqs[i].irq, IRQT_BOTHEDGE);
+			set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_RISING);
+			set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_BOTH);
 		}
 }
 EXPORT_SYMBOL(soc_pcmcia_enable_irqs);
diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c
index 51e26c1f5e8..32dd8512693 100644
--- a/drivers/video/am200epd.c
+++ b/drivers/video/am200epd.c
@@ -221,7 +221,7 @@ static int am200_setup_irq(struct fb_info *info)
 		return retval;
 	}
 
-	return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING);
+	return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void am200_set_rst(struct metronomefb_par *par, int state)
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index 81dbcf53cf0..fafd0f26b90 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -646,7 +646,7 @@ static int sossi_init(struct omapfb_device *fbdev)
 	sossi_write_reg(SOSSI_INIT1_REG, l);
 
 	if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
-			     IRQT_FALLING,
+			     IRQ_TYPE_EDGE_FALLING,
 	     "sossi_match", sossi.fbdev->dev)) < 0) {
 		dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
 		goto err;
diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h
index 13ec7ed0f50..a25d18f2d87 100644
--- a/include/asm-arm/arch-pnx4008/irqs.h
+++ b/include/asm-arm/arch-pnx4008/irqs.h
@@ -135,30 +135,30 @@
 
 #define PNX4008_IRQ_TYPES \
 {                                           /*IRQ #'s: */         \
-IRQT_LOW,  IRQT_LOW,  IRQT_LOW,  IRQT_HIGH, /*  0, 1, 2, 3 */     \
-IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /*  4, 5, 6, 7 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /*  8, 9,10,11 */     \
-IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_LOW,  /* 28,29,30,31 */     \
-IRQT_HIGH, IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */  \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_LOW,  /* 48,49,50,51 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_HIGH, /* 56,57,58,59 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
 }
 
 /* Start Enable Pin Interrupts - table 58 page 66 */
diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h
index b6952534a4e..21aa8ac35c1 100644
--- a/include/asm-arm/arch-pxa/idp.h
+++ b/include/asm-arm/arch-pxa/idp.h
@@ -138,18 +138,18 @@
 #define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
 #define IDE_IRQ				IRQ_GPIO(21)
 
-#define TOUCH_PANEL_IRQ_EDGE		IRQT_FALLING
+#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
 
 #define ETHERNET_IRQ			IRQ_GPIO(4)
-#define ETHERNET_IRQ_EDGE		IRQT_RISING
+#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
 
-#define IDE_IRQ_EDGE			IRQT_RISING
+#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
 
 #define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQT_BOTHEDGE
+#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
 
 #define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQT_BOTHEDGE
+#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
 
 #define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
 #define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h
index b699d0d7bdb..2e201317906 100644
--- a/include/asm-arm/arch-pxa/pcm990_baseboard.h
+++ b/include/asm-arm/arch-pxa/pcm990_baseboard.h
@@ -29,14 +29,14 @@
 /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
 #define PCM990_CTRL_INT_IRQ_GPIO	9
 #define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQT_RISING
+#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
 #define PCM990_CTRL_BASE		0xea000000
 #define PCM990_CTRL_SIZE		(1*1024*1024)
 
 #define PCM990_CTRL_PWR_IRQ_GPIO	14
 #define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQT_RISING
+#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 /* visible CPLD (U7) registers */
 #define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
@@ -133,7 +133,7 @@
  */
 #define PCM990_IDE_IRQ_GPIO	13
 #define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQT_RISING
+#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
 #define PCM990_IDE_PLD_BASE	0xee000000
 #define PCM990_IDE_PLD_SIZE	(1*1024*1024)
@@ -189,11 +189,11 @@
  */
 #define PCM990_CF_IRQ_GPIO	11
 #define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQT_RISING
+#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_CD_GPIO	12
 #define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQT_RISING
+#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
 #define PCM990_CF_PLD_BASE	0xef000000
@@ -259,14 +259,14 @@
  */
 #define PCM990_AC97_IRQ_GPIO	10
 #define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQT_RISING
+#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 /*
  * MMC phyCORE
  */
 #define PCM990_MMC0_IRQ_GPIO	9
 #define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQT_FALLING
+#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
 
 /*
  * USB phyCore
diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h
index b14cbda01dc..193f6c15f4d 100644
--- a/include/asm-arm/arch-sa1100/ide.h
+++ b/include/asm-arm/arch-sa1100/ide.h
@@ -61,7 +61,7 @@ ide_init_default_hwifs(void)
 
         /* Enable GPIO as interrupt line */
         GPDR &= ~LART_GPIO_IDE;
-	set_irq_type(LART_IRQ_IDE, IRQT_RISING);
+	set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
 
         /* set PCMCIA interface timing */
         MECR = 0x00060006;
diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h
index 1b882a255e3..9cb01907e43 100644
--- a/include/asm-arm/irq.h
+++ b/include/asm-arm/irq.h
@@ -19,23 +19,6 @@
 #define NO_IRQ	((unsigned int)(-1))
 #endif
 
-
-/*
- * Migration helpers
- */
-#define __IRQT_FALEDGE	IRQ_TYPE_EDGE_FALLING
-#define __IRQT_RISEDGE	IRQ_TYPE_EDGE_RISING
-#define __IRQT_LOWLVL	IRQ_TYPE_LEVEL_LOW
-#define __IRQT_HIGHLVL	IRQ_TYPE_LEVEL_HIGH
-
-#define IRQT_NOEDGE	(0)
-#define IRQT_RISING	(__IRQT_RISEDGE)
-#define IRQT_FALLING	(__IRQT_FALEDGE)
-#define IRQT_BOTHEDGE	(__IRQT_RISEDGE|__IRQT_FALEDGE)
-#define IRQT_LOW	(__IRQT_LOWLVL)
-#define IRQT_HIGH	(__IRQT_HIGHLVL)
-#define IRQT_PROBE	IRQ_TYPE_PROBE
-
 #ifndef __ASSEMBLY__
 struct irqaction;
 extern void migrate_irqs(void);
-- 
cgit v1.2.3


From cc04454fa81e93b5f1b5133950331639d2f59f85 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Fri, 25 Jul 2008 13:54:50 -0500
Subject: KVM: ppc: fix invalidation of large guest pages

When guest invalidates a large tlb map, there may be more than one
corresponding shadow tlb maps that need to be invalidated. Use eaddr and eend
to find these shadow tlb maps.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/powerpc/kvm/44x_tlb.c    | 5 +++--
 arch/powerpc/kvm/emulate.c    | 2 +-
 include/asm-powerpc/kvm_ppc.h | 3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 75dff7cfa81..5a5602da509 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -177,7 +177,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid,
 	                                            vcpu->arch.msr & MSR_PR);
 }
 
-void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
+void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                           gva_t eend, u32 asid)
 {
 	unsigned int pid = asid & 0xff;
 	int i;
@@ -191,7 +192,7 @@ void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
 		if (!get_tlb_v(stlbe))
 			continue;
 
-		if (eaddr < get_tlb_eaddr(stlbe))
+		if (eend < get_tlb_eaddr(stlbe))
 			continue;
 
 		if (eaddr > get_tlb_end(stlbe))
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 00009746128..8c605d0a548 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -137,7 +137,7 @@ static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst)
 	if (tlbe->word0 & PPC44x_TLB_VALID) {
 		eaddr = get_tlb_eaddr(tlbe);
 		asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid;
-		kvmppc_mmu_invalidate(vcpu, eaddr, asid);
+		kvmppc_mmu_invalidate(vcpu, eaddr, get_tlb_end(tlbe), asid);
 	}
 
 	switch (ws) {
diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h
index 5a21115228a..a8b06879226 100644
--- a/include/asm-powerpc/kvm_ppc.h
+++ b/include/asm-powerpc/kvm_ppc.h
@@ -61,7 +61,8 @@ extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
 
 extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
                            u64 asid, u32 flags);
-extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid);
+extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                                  gva_t eend, u32 asid);
 extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
 
 extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu);
-- 
cgit v1.2.3


From daf93dd55c48b65ab2f1907e0fc5ef994896c787 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 27 Jul 2008 10:10:58 +0100
Subject: [ARM] fix VIPT/VIVT macro optimisations, add comments

cacheflush.h was doing:

... VIVT only stuff
... VIPT only stuff
... VIVT or VIPT stuff

which is clearly bogus - we would only ever use the "VIVT or VIPT" case
when both VIVT and VIPT are not selected.  Fix this.

Add comments to each case, including noting the impossibility of
correctly detecting the cache type of ARM926 and ARMv6 cores from
the cache type register in the "VIVT or VIPT" case.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/cacheflush.h | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index 03cf1ee977b..e68a1cbcc85 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -459,15 +459,19 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
 #define __cacheid_vivt_asid_tagged_instr(val)	(__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0)
 
 #if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
-
+/*
+ * VIVT caches only
+ */
 #define cache_is_vivt()			1
 #define cache_is_vipt()			0
 #define cache_is_vipt_nonaliasing()	0
 #define cache_is_vipt_aliasing()	0
 #define icache_is_vivt_asid_tagged()	0
 
-#elif defined(CONFIG_CPU_CACHE_VIPT)
-
+#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
+/*
+ * VIPT caches only
+ */
 #define cache_is_vivt()			0
 #define cache_is_vipt()			1
 #define cache_is_vipt_nonaliasing()					\
@@ -489,7 +493,12 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
 	})
 
 #else
-
+/*
+ * VIVT or VIPT caches.  Note that this is unreliable since ARM926
+ * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test.
+ * There's no way to tell from the CacheType register what type (!)
+ * the cache is.
+ */
 #define cache_is_vivt()							\
 	({								\
 		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-- 
cgit v1.2.3


From 53cdb27a933e4032934cbda0b447cfc9943c0eac Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 27 Jul 2008 10:35:54 +0100
Subject: [ARM] Fix shared mmap when more than two maps of the same file exist

The shared mmap code works fine for the test case, which only checked
for two shared maps of the same file.  However, three shared maps
result in one mapping remaining cached, resulting in stale data being
visible via that mapping.  Fix this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault-armv.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index fbfa2605844..a8ec97b4752 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -37,7 +37,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte, entry;
-	int ret = 0;
+	int ret;
 
 	pgd = pgd_offset(vma->vm_mm, address);
 	if (pgd_none(*pgd))
@@ -54,16 +54,20 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	pte = pte_offset_map(pmd, address);
 	entry = *pte;
 
+	/*
+	 * If this page is present, it's actually being shared.
+	 */
+	ret = pte_present(entry);
+
 	/*
 	 * If this page isn't present, or is already setup to
 	 * fault (ie, is old), we can safely ignore any issues.
 	 */
-	if (pte_present(entry) && pte_val(entry) & shared_pte_mask) {
+	if (ret && pte_val(entry) & shared_pte_mask) {
 		flush_cache_page(vma, address, pte_pfn(entry));
 		pte_val(entry) &= ~shared_pte_mask;
 		set_pte_at(vma->vm_mm, address, pte, entry);
 		flush_tlb_page(vma, address);
-		ret = 1;
 	}
 	pte_unmap(pte);
 	return ret;
-- 
cgit v1.2.3


From 3c26e17032e42cfbe606882288223ad6146e4c38 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Sun, 27 Jul 2008 02:34:45 -0700
Subject: avr32: some mmc/sd cleanups

Minor cleanups for the MMC/SD support on avr32:

 - Make at32_add_device_mci() properly initialize "missing"
   platform data ... so boards like STK1002 won't try GPIO 0.

 - Switch over to gpio_is_valid() instead of testing for only
   one designated value.

 - Provide STK1002 platform data for the unlikely case that
   switches are set so first Ethernet controller isn't in use.
   (That's the only way to get card detect and writeprotect
   switch sensing on the STK1000.)

And get rid of one "unused variable" warning.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/boards/atstk1000/atstk1002.c | 19 ++++++++++++++++++-
 arch/avr32/mach-at32ap/at32ap700x.c     | 13 +++++++------
 drivers/mmc/host/atmel-mci.c            | 16 ++++++++--------
 3 files changed, 33 insertions(+), 15 deletions(-)

diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 14dc5a14369..8538ba75ef9 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -21,6 +21,8 @@
 
 #include <asm/io.h>
 #include <asm/setup.h>
+#include <asm/atmel-mci.h>
+
 #include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
@@ -260,6 +262,21 @@ void __init setup_board(void)
 	at32_setup_serial_console(0);
 }
 
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+
+/* MMC card detect requires MACB0 *NOT* be used */
+#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_PC(14),	/* gpio30/sdcd */
+	.wp_pin		= GPIO_PIN_PC(15),	/* gpio31/sdwp */
+};
+#define MCI_PDATA	&mci0_data
+#else
+#define MCI_PDATA	NULL
+#endif	/* SW6 for sd{cd,wp} routing */
+
+#endif	/* SW2 for MMC signal routing */
+
 static int __init atstk1002_init(void)
 {
 	/*
@@ -309,7 +326,7 @@ static int __init atstk1002_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-	at32_add_device_mci(0, NULL);
+	at32_add_device_mci(0, MCI_PDATA);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 5f30b353a27..1617048c86c 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
@@ -1299,7 +1300,7 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 
 	if (!data) {
 		data = &_data;
-		memset(data, 0, sizeof(struct mci_platform_data));
+		memset(data, -1, sizeof(struct mci_platform_data));
 		data->detect_pin = GPIO_PIN_NONE;
 		data->wp_pin = GPIO_PIN_NONE;
 	}
@@ -1315,9 +1316,9 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
 
-	if (data->detect_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->detect_pin))
 		at32_select_gpio(data->detect_pin, 0);
-	if (data->wp_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->wp_pin))
 		at32_select_gpio(data->wp_pin, 0);
 
 	atmel_mci0_pclk.dev = &pdev->dev;
@@ -1852,11 +1853,11 @@ at32_add_device_cf(unsigned int id, unsigned int extint,
 	if (at32_init_ide_or_cf(pdev, data->cs, extint))
 		goto fail;
 
-	if (data->detect_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->detect_pin))
 		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-	if (data->reset_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->reset_pin))
 		at32_select_gpio(data->reset_pin, 0);
-	if (data->vcc_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->vcc_pin))
 		at32_select_gpio(data->vcc_pin, 0);
 	/* READY is used as extint, so we can't select it as gpio */
 
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 82bbbe99816..992b4beb757 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -12,6 +12,7 @@
 #include <linux/debugfs.h>
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -28,7 +29,6 @@
 #include <asm/unaligned.h>
 
 #include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
 
 #include "atmel-mci-regs.h"
 
@@ -574,7 +574,7 @@ static int atmci_get_ro(struct mmc_host *mmc)
 	int			read_only = 0;
 	struct atmel_mci	*host = mmc_priv(mmc);
 
-	if (host->wp_pin >= 0) {
+	if (gpio_is_valid(host->wp_pin)) {
 		read_only = gpio_get_value(host->wp_pin);
 		dev_dbg(&mmc->class_dev, "card is %s\n",
 				read_only ? "read-only" : "read-write");
@@ -636,7 +636,7 @@ static void atmci_detect_change(unsigned long data)
 	 * been freed.
 	 */
 	smp_rmb();
-	if (host->detect_pin < 0)
+	if (!gpio_is_valid(host->detect_pin))
 		return;
 
 	enable_irq(gpio_to_irq(host->detect_pin));
@@ -1051,7 +1051,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 
 	/* Assume card is present if we don't have a detect pin */
 	host->present = 1;
-	if (host->detect_pin >= 0) {
+	if (gpio_is_valid(host->detect_pin)) {
 		if (gpio_request(host->detect_pin, "mmc_detect")) {
 			dev_dbg(&mmc->class_dev, "no detect pin available\n");
 			host->detect_pin = -1;
@@ -1059,7 +1059,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 			host->present = !gpio_get_value(host->detect_pin);
 		}
 	}
-	if (host->wp_pin >= 0) {
+	if (gpio_is_valid(host->wp_pin)) {
 		if (gpio_request(host->wp_pin, "mmc_wp")) {
 			dev_dbg(&mmc->class_dev, "no WP pin available\n");
 			host->wp_pin = -1;
@@ -1070,7 +1070,7 @@ static int __init atmci_probe(struct platform_device *pdev)
 
 	mmc_add_host(mmc);
 
-	if (host->detect_pin >= 0) {
+	if (gpio_is_valid(host->detect_pin)) {
 		setup_timer(&host->detect_timer, atmci_detect_change,
 				(unsigned long)host);
 
@@ -1113,7 +1113,7 @@ static int __exit atmci_remove(struct platform_device *pdev)
 	if (host) {
 		/* Debugfs stuff is cleaned up by mmc core */
 
-		if (host->detect_pin >= 0) {
+		if (gpio_is_valid(host->detect_pin)) {
 			int pin = host->detect_pin;
 
 			/* Make sure the timer doesn't enable the interrupt */
@@ -1133,7 +1133,7 @@ static int __exit atmci_remove(struct platform_device *pdev)
 		mci_readl(host, SR);
 		clk_disable(host->mck);
 
-		if (host->wp_pin >= 0)
+		if (gpio_is_valid(host->wp_pin))
 			gpio_free(host->wp_pin);
 
 		free_irq(platform_get_irq(pdev, 0), host->mmc);
-- 
cgit v1.2.3


From 2b142900784c6e38c8d39fa57d5f95ef08e735d8 Mon Sep 17 00:00:00 2001
From: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date: Sun, 27 Jul 2008 09:38:42 +0100
Subject: [SCSI] extend the last_sector_bug flag to cover more sectors

The last_sector_bug flag was added to work around a bug in certain usb
cardreaders, where they would crash if a multiple sector read included the
last sector. The original implementation avoids this by e.g. splitting an 8
sector read which includes the last sector into a 7 sector read, and a single
sector read for the last sector.  The flag is enabled for all USB devices.

This revealed a second bug in other usb cardreaders, which crash when they
get a multiple sector read which stops 1 sector short of the last sector.
Affected hardware includes the Kingston "MobileLite" external USB cardreader
and the internal USB cardreader on the Asus EeePC.

Extend the last_sector_bug workaround to ensure that any access which touches
the last 8 hardware sectors of the device is a single sector long.  Requests
are shrunk as necessary to meet this constraint.

This gives us a safety margin against potential unknown or future bugs
affecting multi-sector access to the end of the device.  The two known bugs
only affect the last 2 sectors.  However, they suggest that these devices
are prone to fencepost errors and that multi-sector access to the end of the
device is not well tested.  Popular OS's use multi-sector accesses, but they
rarely read the last few sectors.  Linux (with udev & vol_id) automatically
reads sectors from the end of the device on insertion.  It is assumed that
single sector accesses are more thoroughly tested during development.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/sd.c          | 21 +++++++++++++++------
 drivers/scsi/sd.h          |  6 ++++++
 include/scsi/scsi_device.h |  3 ++-
 3 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 8e08d51a0f0..e5e7d785645 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -375,6 +375,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	struct gendisk *disk = rq->rq_disk;
 	struct scsi_disk *sdkp;
 	sector_t block = rq->sector;
+	sector_t threshold;
 	unsigned int this_count = rq->nr_sectors;
 	unsigned int timeout = sdp->timeout;
 	int ret;
@@ -422,13 +423,21 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 	}
 
 	/*
-	 * Some devices (some sdcards for one) don't like it if the
-	 * last sector gets read in a larger then 1 sector read.
+	 * Some SD card readers can't handle multi-sector accesses which touch
+	 * the last one or two hardware sectors.  Split accesses as needed.
 	 */
-	if (unlikely(sdp->last_sector_bug &&
-	    rq->nr_sectors > sdp->sector_size / 512 &&
-	    block + this_count == get_capacity(disk)))
-		this_count -= sdp->sector_size / 512;
+	threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
+		(sdp->sector_size / 512);
+
+	if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
+		if (block < threshold) {
+			/* Access up to the threshold but not beyond */
+			this_count = threshold - block;
+		} else {
+			/* Access only a single hardware sector */
+			this_count = sdp->sector_size / 512;
+		}
+	}
 
 	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
 					(unsigned long long)block));
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 550b2f70a1f..95b9f06534d 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -31,6 +31,12 @@
  */
 #define SD_BUF_SIZE		512
 
+/*
+ * Number of sectors at the end of the device to avoid multi-sector
+ * accesses to in the case of last_sector_bug
+ */
+#define SD_LAST_BUGGY_SECTORS	8
+
 struct scsi_disk {
 	struct scsi_driver *driver;	/* always &sd_template */
 	struct scsi_device *device;
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 9cecc409f0f..291d56a1916 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -140,7 +140,8 @@ struct scsi_device {
 	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
 	unsigned guess_capacity:1;	/* READ_CAPACITY might be too high by 1 */
 	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
-	unsigned last_sector_bug:1;	/* Always read last sector in a 1 sector read */
+	unsigned last_sector_bug:1;	/* do not use multisector accesses on
+					   SD_LAST_BUGGY_SECTORS */
 
 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
 	struct list_head event_list;	/* asserted events */
-- 
cgit v1.2.3


From cadbd4a5e36dde7e6c49b587b2c419103c0b7218 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Thu, 3 Jul 2008 23:47:27 -0700
Subject: [SCSI] replace __FUNCTION__ with __func__

[jejb: fixed up a ton of missed conversions.

 All of you are on notice this has happened, driver trees will now
 need to be rebased]

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: SCSI List <linux-scsi@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/message/fusion/mptbase.c           | 24 ++++++-------
 drivers/message/fusion/mptctl.c            |  4 +--
 drivers/message/fusion/mptfc.c             |  8 ++---
 drivers/message/fusion/mptlan.c            | 26 +++++++-------
 drivers/message/fusion/mptsas.c            | 54 +++++++++++++++---------------
 drivers/message/fusion/mptscsih.c          |  4 +--
 drivers/scsi/advansys.c                    |  2 +-
 drivers/scsi/aha152x.c                     | 12 +++----
 drivers/scsi/aic94xx/aic94xx.h             |  4 +--
 drivers/scsi/aic94xx/aic94xx_hwi.c         |  2 +-
 drivers/scsi/aic94xx/aic94xx_scb.c         | 46 ++++++++++++-------------
 drivers/scsi/aic94xx/aic94xx_task.c        |  2 +-
 drivers/scsi/aic94xx/aic94xx_tmf.c         | 18 +++++-----
 drivers/scsi/arm/fas216.c                  |  4 +--
 drivers/scsi/device_handler/scsi_dh_alua.c |  6 ++--
 drivers/scsi/ibmvscsi/ibmvfc.h             |  4 +--
 drivers/scsi/ibmvscsi/ibmvstgt.c           |  2 +-
 drivers/scsi/imm.c                         |  2 +-
 drivers/scsi/ipr.h                         |  6 ++--
 drivers/scsi/libsas/sas_ata.c              | 16 ++++-----
 drivers/scsi/libsas/sas_expander.c         | 12 +++----
 drivers/scsi/libsas/sas_port.c             |  4 +--
 drivers/scsi/libsas/sas_scsi_host.c        | 30 ++++++++---------
 drivers/scsi/libsrp.c                      |  2 +-
 drivers/scsi/lpfc/lpfc_init.c              |  4 +--
 drivers/scsi/lpfc/lpfc_scsi.c              |  2 +-
 drivers/scsi/lpfc/lpfc_sli.c               |  6 ++--
 drivers/scsi/megaraid/mega_common.h        |  2 +-
 drivers/scsi/megaraid/megaraid_mbox.c      | 16 ++++-----
 drivers/scsi/megaraid/megaraid_mm.c        |  4 +--
 drivers/scsi/nsp32.c                       |  4 +--
 drivers/scsi/nsp32_debug.c                 |  2 +-
 drivers/scsi/pcmcia/nsp_cs.c               |  4 +--
 drivers/scsi/pcmcia/nsp_debug.c            |  2 +-
 drivers/scsi/ppa.c                         |  2 +-
 drivers/scsi/qla1280.c                     | 12 +++----
 drivers/scsi/scsi_debug.c                  | 12 +++----
 drivers/scsi/scsi_devinfo.c                |  6 ++--
 drivers/scsi/scsi_error.c                  | 26 +++++++-------
 drivers/scsi/scsi_lib.c                    |  6 ++--
 drivers/scsi/scsi_netlink.c                |  8 ++---
 drivers/scsi/scsi_proc.c                   |  4 +--
 drivers/scsi/scsi_scan.c                   | 12 +++----
 drivers/scsi/scsi_tgt_priv.h               |  2 +-
 drivers/scsi/scsi_transport_fc.c           | 12 +++----
 drivers/scsi/scsi_transport_sas.c          |  4 +--
 drivers/scsi/tmscsim.c                     |  8 ++---
 drivers/scsi/wd7000.c                      |  8 ++---
 drivers/scsi/zalon.c                       |  8 ++---
 49 files changed, 235 insertions(+), 235 deletions(-)

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 34402c47027..d6a0074b9dc 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -273,12 +273,12 @@ mpt_fault_reset_work(struct work_struct *work)
 	ioc_raw_state = mpt_GetIocState(ioc, 0);
 	if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
 		printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
-		    ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+		       ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
 		printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
-		    ioc->name, __FUNCTION__);
+		       ioc->name, __func__);
 		rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
 		printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
-		    __FUNCTION__, (rc == 0) ? "success" : "failed");
+		       __func__, (rc == 0) ? "success" : "failed");
 		ioc_raw_state = mpt_GetIocState(ioc, 0);
 		if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
 			printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
@@ -356,7 +356,7 @@ mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
 	if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
 		MptCallbacks[cb_idx] == NULL) {
 		printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
-				__FUNCTION__, ioc->name, cb_idx);
+				__func__, ioc->name, cb_idx);
 		goto out;
 	}
 
@@ -420,7 +420,7 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa)
 	if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
 		MptCallbacks[cb_idx] == NULL) {
 		printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
-				__FUNCTION__, ioc->name, cb_idx);
+				__func__, ioc->name, cb_idx);
 		freeme = 0;
 		goto out;
 	}
@@ -2434,7 +2434,7 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 
 	if (ioc->cached_fw != NULL) {
 		ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: Pushing FW onto "
-		    "adapter\n", __FUNCTION__, ioc->name));
+		    "adapter\n", __func__, ioc->name));
 		if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
 		    ioc->cached_fw, CAN_SLEEP)) < 0) {
 			printk(MYIOC_s_WARN_FMT
@@ -3693,7 +3693,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 
 	if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
 		drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
-			"address=%p\n",  ioc->name, __FUNCTION__,
+			"address=%p\n",  ioc->name, __func__,
 			&ioc->chip->Doorbell, &ioc->chip->Reset_1078));
 		CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
 		if (sleepFlag == CAN_SLEEP)
@@ -4742,12 +4742,12 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 		break;
 	}
 
-	printk("%s: persist_opcode=%x\n",__FUNCTION__, persist_opcode);
+	printk("%s: persist_opcode=%x\n",__func__, persist_opcode);
 
 	/* Get a MF for this command.
 	 */
 	if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
-		printk("%s: no msg frames!\n",__FUNCTION__);
+		printk("%s: no msg frames!\n",__func__);
 		return -1;
         }
 
@@ -4771,13 +4771,13 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
 	    (SasIoUnitControlReply_t *)ioc->persist_reply_frame;
 	if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
 		printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
-		    __FUNCTION__,
+		    __func__,
 		    sasIoUnitCntrReply->IOCStatus,
 		    sasIoUnitCntrReply->IOCLogInfo);
 		return -1;
 	}
 
-	printk("%s: success\n",__FUNCTION__);
+	printk("%s: success\n",__func__);
 	return 0;
 }
 
@@ -5784,7 +5784,7 @@ SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
 
 	if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__FUNCTION__));
+		    ioc->name,__func__));
 		return -1;
 	}
 
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index a5920423e2b..f5233f3d9ef 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -505,7 +505,7 @@ mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 	event = le32_to_cpu(pEvReply->Event) & 0xFF;
 
 	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s() called\n",
-	    ioc->name, __FUNCTION__));
+	    ioc->name, __func__));
 	if(async_queue == NULL)
 		return 1;
 
@@ -2482,7 +2482,7 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	 */
 	if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
-		    ioc->name,__FUNCTION__));
+		    ioc->name,__func__));
 		goto out;
 	}
 
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index b36cae9ec6d..c3c24fdf9fb 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -231,28 +231,28 @@ static int
 mptfc_abort(struct scsi_cmnd *SCpnt)
 {
 	return
-	    mptfc_block_error_handler(SCpnt, mptscsih_abort, __FUNCTION__);
+	    mptfc_block_error_handler(SCpnt, mptscsih_abort, __func__);
 }
 
 static int
 mptfc_dev_reset(struct scsi_cmnd *SCpnt)
 {
 	return
-	    mptfc_block_error_handler(SCpnt, mptscsih_dev_reset, __FUNCTION__);
+	    mptfc_block_error_handler(SCpnt, mptscsih_dev_reset, __func__);
 }
 
 static int
 mptfc_bus_reset(struct scsi_cmnd *SCpnt)
 {
 	return
-	    mptfc_block_error_handler(SCpnt, mptscsih_bus_reset, __FUNCTION__);
+	    mptfc_block_error_handler(SCpnt, mptscsih_bus_reset, __func__);
 }
 
 static int
 mptfc_host_reset(struct scsi_cmnd *SCpnt)
 {
 	return
-	    mptfc_block_error_handler(SCpnt, mptscsih_host_reset, __FUNCTION__);
+	    mptfc_block_error_handler(SCpnt, mptscsih_host_reset, __func__);
 }
 
 static void
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index d709d92b7b3..a1abf95cf75 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -610,7 +610,7 @@ mpt_lan_send_turbo(struct net_device *dev, u32 tmsg)
 
 	dioprintk((KERN_INFO MYNAM ": %s/%s: @%s, skb %p sent.\n",
 			IOC_AND_NETDEV_NAMES_s_s(dev),
-			__FUNCTION__, sent));
+			__func__, sent));
 
 	priv->SendCtl[ctx].skb = NULL;
 	pci_unmap_single(mpt_dev->pcidev, priv->SendCtl[ctx].dma,
@@ -676,7 +676,7 @@ mpt_lan_send_reply(struct net_device *dev, LANSendReply_t *pSendRep)
 
 		dioprintk((KERN_INFO MYNAM ": %s/%s: @%s, skb %p sent.\n",
 				IOC_AND_NETDEV_NAMES_s_s(dev),
-				__FUNCTION__, sent));
+				__func__, sent));
 
 		priv->SendCtl[ctx].skb = NULL;
 		pci_unmap_single(mpt_dev->pcidev, priv->SendCtl[ctx].dma,
@@ -715,7 +715,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 	u16 cur_naa = 0x1000;
 
 	dioprintk((KERN_INFO MYNAM ": %s called, skb_addr = %p\n",
-			__FUNCTION__, skb));
+			__func__, skb));
 
 	spin_lock_irqsave(&priv->txfidx_lock, flags);
 	if (priv->mpt_txfidx_tail < 0) {
@@ -723,7 +723,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 		spin_unlock_irqrestore(&priv->txfidx_lock, flags);
 
 		printk (KERN_ERR "%s: no tx context available: %u\n",
-			__FUNCTION__, priv->mpt_txfidx_tail);
+			__func__, priv->mpt_txfidx_tail);
 		return 1;
 	}
 
@@ -733,7 +733,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev)
 		spin_unlock_irqrestore(&priv->txfidx_lock, flags);
 
 		printk (KERN_ERR "%s: Unable to alloc request frame\n",
-			__FUNCTION__);
+			__func__);
 		return 1;
 	}
 
@@ -1208,7 +1208,7 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 
 	dioprintk((KERN_INFO MYNAM ": %s/%s: @%s, Start_buckets = %u, buckets_out = %u\n",
 			IOC_AND_NETDEV_NAMES_s_s(dev),
-			__FUNCTION__, buckets, curr));
+			__func__, buckets, curr));
 
 	max = (mpt_dev->req_sz - MPT_LAN_RECEIVE_POST_REQUEST_SIZE) /
 			(MPT_LAN_TRANSACTION32_SIZE + sizeof(SGESimple64_t));
@@ -1217,9 +1217,9 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 		mf = mpt_get_msg_frame(LanCtx, mpt_dev);
 		if (mf == NULL) {
 			printk (KERN_ERR "%s: Unable to alloc request frame\n",
-				__FUNCTION__);
+				__func__);
 			dioprintk((KERN_ERR "%s: %u buckets remaining\n",
-				 __FUNCTION__, buckets));
+				 __func__, buckets));
 			goto out;
 		}
 		pRecvReq = (LANReceivePostRequest_t *) mf;
@@ -1244,7 +1244,7 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 			spin_lock_irqsave(&priv->rxfidx_lock, flags);
 			if (priv->mpt_rxfidx_tail < 0) {
 				printk (KERN_ERR "%s: Can't alloc context\n",
-					__FUNCTION__);
+					__func__);
 				spin_unlock_irqrestore(&priv->rxfidx_lock,
 						       flags);
 				break;
@@ -1267,7 +1267,7 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 				if (skb == NULL) {
 					printk (KERN_WARNING
 						MYNAM "/%s: Can't alloc skb\n",
-						__FUNCTION__);
+						__func__);
 					priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = ctx;
 					spin_unlock_irqrestore(&priv->rxfidx_lock, flags);
 					break;
@@ -1305,7 +1305,7 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 
 		if (pSimple == NULL) {
 /**/			printk (KERN_WARNING MYNAM "/%s: No buckets posted\n",
-/**/				__FUNCTION__);
+/**/				__func__);
 			mpt_free_msg_frame(mpt_dev, mf);
 			goto out;
 		}
@@ -1329,9 +1329,9 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
 
 out:
 	dioprintk((KERN_INFO MYNAM "/%s: End_buckets = %u, priv->buckets_out = %u\n",
-		  __FUNCTION__, buckets, atomic_read(&priv->buckets_out)));
+		  __func__, buckets, atomic_read(&priv->buckets_out)));
 	dioprintk((KERN_INFO MYNAM "/%s: Posted %u buckets and received %u back\n",
-	__FUNCTION__, priv->total_posted, priv->total_received));
+	__func__, priv->total_posted, priv->total_received));
 
 	clear_bit(0, &priv->post_buckets_active);
 }
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index b1147aa7afd..12b732512e5 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -300,7 +300,7 @@ mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_detai
 	phy_info = port_info->phy_info;
 
 	dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d "
-	    "bitmask=0x%016llX\n", ioc->name, __FUNCTION__, port_details,
+	    "bitmask=0x%016llX\n", ioc->name, __func__, port_details,
 	    port_details->num_phys, (unsigned long long)
 	    port_details->phy_bitmask));
 
@@ -411,7 +411,7 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 		 */
 		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		    "%s: [%p]: deleting phy = %d\n",
-		    ioc->name, __FUNCTION__, port_details, i));
+		    ioc->name, __func__, port_details, i));
 		port_details->num_phys--;
 		port_details->phy_bitmask &= ~ (1 << phy_info->phy_id);
 		memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
@@ -497,7 +497,7 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 			continue;
 		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		    "%s: [%p]: phy_id=%02d num_phys=%02d "
-		    "bitmask=0x%016llX\n", ioc->name, __FUNCTION__,
+		    "bitmask=0x%016llX\n", ioc->name, __func__,
 		    port_details, i, port_details->num_phys,
 		    (unsigned long long)port_details->phy_bitmask));
 		dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n",
@@ -553,7 +553,7 @@ mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id)
 
 	if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n",
-		    ioc->name,__FUNCTION__, __LINE__));
+		    ioc->name,__func__, __LINE__));
 		return 0;
 	}
 
@@ -606,7 +606,7 @@ mptsas_target_reset_queue(MPT_ADAPTER *ioc,
 	    GFP_ATOMIC);
 	if (!target_reset_list) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__FUNCTION__, __LINE__));
+		    ioc->name,__func__, __LINE__));
 		return;
 	}
 
@@ -673,7 +673,7 @@ mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
 	ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
 	if (!ev) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-		    ioc->name,__FUNCTION__, __LINE__));
+		    ioc->name,__func__, __LINE__));
 		return;
 	}
 
@@ -1183,7 +1183,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
 	reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply;
 	if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) {
 		printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
-		    ioc->name, __FUNCTION__, reply->IOCStatus, reply->IOCLogInfo);
+		    ioc->name, __func__, reply->IOCStatus, reply->IOCLogInfo);
 		error = -ENXIO;
 		goto out_unlock;
 	}
@@ -1270,14 +1270,14 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
 	if (!rsp) {
 		printk(MYIOC_s_ERR_FMT "%s: the smp response space is missing\n",
-		    ioc->name, __FUNCTION__);
+		    ioc->name, __func__);
 		return -EINVAL;
 	}
 
 	/* do we need to support multiple segments? */
 	if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
 		printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
-		    ioc->name, __FUNCTION__, req->bio->bi_vcnt, req->data_len,
+		    ioc->name, __func__, req->bio->bi_vcnt, req->data_len,
 		    rsp->bio->bi_vcnt, rsp->data_len);
 		return -EINVAL;
 	}
@@ -1343,7 +1343,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
 	timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
 	if (!timeleft) {
-		printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __FUNCTION__);
+		printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __func__);
 		/* On timeout reset the board */
 		mpt_HardResetHandler(ioc, CAN_SLEEP);
 		ret = -ETIMEDOUT;
@@ -1361,7 +1361,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 		rsp->data_len -= smprep->ResponseDataLength;
 	} else {
 		printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
-		    ioc->name, __FUNCTION__);
+		    ioc->name, __func__);
 		ret = -ENXIO;
 	}
 unmap:
@@ -2006,7 +2006,7 @@ static int mptsas_probe_one_phy(struct device *dev,
 			if (error) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 					"%s: exit at line=%d\n", ioc->name,
-					__FUNCTION__, __LINE__));
+					__func__, __LINE__));
 				goto out;
 			}
 			mptsas_set_port(ioc, phy_info, port);
@@ -2076,7 +2076,7 @@ static int mptsas_probe_one_phy(struct device *dev,
 		if (!rphy) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-				__FUNCTION__, __LINE__));
+				__func__, __LINE__));
 			goto out;
 		}
 
@@ -2085,7 +2085,7 @@ static int mptsas_probe_one_phy(struct device *dev,
 		if (error) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-				__FUNCTION__, __LINE__));
+				__func__, __LINE__));
 			sas_rphy_free(rphy);
 			goto out;
 		}
@@ -2613,7 +2613,7 @@ mptsas_hotplug_work(struct work_struct *work)
 				    (ev->channel << 8) + ev->id)) {
 					dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 					"%s: exit at line=%d\n", ioc->name,
-						__FUNCTION__, __LINE__));
+						__func__, __LINE__));
 					break;
 				}
 				phy_info = mptsas_find_phyinfo_by_sas_address(
@@ -2633,20 +2633,20 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!phy_info){
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-				__FUNCTION__, __LINE__));
+				__func__, __LINE__));
 			break;
 		}
 		if (!phy_info->port_details) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 		rphy = mptsas_get_rphy(phy_info);
 		if (!rphy) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 
@@ -2654,7 +2654,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!port) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 
@@ -2665,7 +2665,7 @@ mptsas_hotplug_work(struct work_struct *work)
 			if (!vtarget) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 					"%s: exit at line=%d\n", ioc->name,
-					__FUNCTION__, __LINE__));
+					__func__, __LINE__));
 				break;
 			}
 
@@ -2720,7 +2720,7 @@ mptsas_hotplug_work(struct work_struct *work)
 			(ev->channel << 8) + ev->id)) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 					"%s: exit at line=%d\n", ioc->name,
-					__FUNCTION__, __LINE__));
+					__func__, __LINE__));
 			break;
 		}
 
@@ -2732,7 +2732,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!phy_info || !phy_info->port_details) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 
@@ -2744,7 +2744,7 @@ mptsas_hotplug_work(struct work_struct *work)
 			if (!vtarget) {
 				dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				    "%s: exit at line=%d\n", ioc->name,
-				    __FUNCTION__, __LINE__));
+				    __func__, __LINE__));
 				break;
 			}
 			/*
@@ -2767,7 +2767,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (mptsas_get_rphy(phy_info)) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			if (ev->channel) printk("%d\n", __LINE__);
 			break;
 		}
@@ -2776,7 +2776,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!port) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break;
 		}
 		memcpy(&phy_info->attached, &sas_device,
@@ -2801,7 +2801,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (!rphy) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			break; /* non-fatal: an rphy can be added later */
 		}
 
@@ -2809,7 +2809,7 @@ mptsas_hotplug_work(struct work_struct *work)
 		if (sas_rphy_add(rphy)) {
 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
 				"%s: exit at line=%d\n", ioc->name,
-			       	__FUNCTION__, __LINE__));
+			       	__func__, __LINE__));
 			sas_rphy_free(rphy);
 			break;
 		}
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index d142b6b4b97..9f9354fd351 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -461,7 +461,7 @@ mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
 
 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
-		    ioc->name,__FUNCTION__));
+		    ioc->name,__func__));
 		return;
 	}
 
@@ -2187,7 +2187,7 @@ mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *m
 				(ioc->debug_level & MPT_DEBUG_TM ))
 		printk("%s: ha=%d [%d:%d:0] task_type=0x%02X "
 			"iocstatus=0x%04X\n\tloginfo=0x%08X response_code=0x%02X "
-			"term_cmnds=%d\n", __FUNCTION__, ioc->id, pScsiTmReply->Bus,
+			"term_cmnds=%d\n", __func__, ioc->id, pScsiTmReply->Bus,
 			 pScsiTmReply->TargetID, pScsiTmReq->TaskType,
 			le16_to_cpu(pScsiTmReply->IOCStatus),
 			le32_to_cpu(pScsiTmReply->IOCLogInfo),pScsiTmReply->ResponseCode,
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 8591585e5cc..218777bfc14 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -2278,7 +2278,7 @@ do { \
 #define ASC_DBG(lvl, format, arg...) {					\
 	if (asc_dbglvl >= (lvl))					\
 		printk(KERN_DEBUG "%s: %s: " format, DRV_NAME,		\
-			__FUNCTION__ , ## arg);				\
+			__func__ , ## arg);				\
 }
 
 #define ASC_DBG_PRT_SCSI_HOST(lvl, s) \
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 0899cb61e3d..b5a868d85eb 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -288,20 +288,20 @@ static LIST_HEAD(aha152x_host_list);
 #define DO_LOCK(flags)	\
 	do { \
 		if(spin_is_locked(&QLOCK)) { \
-			DPRINTK(debug_intr, DEBUG_LEAD "(%s:%d) already locked at %s:%d\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__, QLOCKER, QLOCKERL); \
+			DPRINTK(debug_intr, DEBUG_LEAD "(%s:%d) already locked at %s:%d\n", CMDINFO(CURRENT_SC), __func__, __LINE__, QLOCKER, QLOCKERL); \
 		} \
-		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locking\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__); \
+		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locking\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
 		spin_lock_irqsave(&QLOCK,flags); \
-		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locked\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__); \
-		QLOCKER=__FUNCTION__; \
+		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locked\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
+		QLOCKER=__func__; \
 		QLOCKERL=__LINE__; \
 	} while(0)
 
 #define DO_UNLOCK(flags)	\
 	do { \
-		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocking (locked at %s:%d)\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__, QLOCKER, QLOCKERL); \
+		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocking (locked at %s:%d)\n", CMDINFO(CURRENT_SC), __func__, __LINE__, QLOCKER, QLOCKERL); \
 		spin_unlock_irqrestore(&QLOCK,flags); \
-		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocked\n", CMDINFO(CURRENT_SC), __FUNCTION__, __LINE__); \
+		DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocked\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
 		QLOCKER="(not locked)"; \
 		QLOCKERL=0; \
 	} while(0)
diff --git a/drivers/scsi/aic94xx/aic94xx.h b/drivers/scsi/aic94xx/aic94xx.h
index 2ef459e9cda..2863a9d2285 100644
--- a/drivers/scsi/aic94xx/aic94xx.h
+++ b/drivers/scsi/aic94xx/aic94xx.h
@@ -39,9 +39,9 @@
 
 #ifdef ASD_ENTER_EXIT
 #define ENTER  printk(KERN_NOTICE "%s: ENTER %s\n", ASD_DRIVER_NAME, \
-		__FUNCTION__)
+		__func__)
 #define EXIT   printk(KERN_NOTICE "%s: --EXIT %s\n", ASD_DRIVER_NAME, \
-		__FUNCTION__)
+		__func__)
 #else
 #define ENTER
 #define EXIT
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
index 83a78222896..eb9dc3195fd 100644
--- a/drivers/scsi/aic94xx/aic94xx_hwi.c
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -1359,7 +1359,7 @@ int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask)
 	struct asd_ascb *ascb_list;
 
 	if (!phy_mask) {
-		asd_printk("%s called with phy_mask of 0!?\n", __FUNCTION__);
+		asd_printk("%s called with phy_mask of 0!?\n", __func__);
 		return 0;
 	}
 
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index 46643319c52..ca55013b6ae 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -211,7 +211,7 @@ static void asd_form_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
 		phy->asd_port = port;
 	}
 	ASD_DPRINTK("%s: updating phy_mask 0x%x for phy%d\n",
-		    __FUNCTION__, phy->asd_port->phy_mask, sas_phy->id);
+		    __func__, phy->asd_port->phy_mask, sas_phy->id);
 	asd_update_port_links(asd_ha, phy);
 	spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
 }
@@ -294,7 +294,7 @@ static void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
 		struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num,
 							  GFP_ATOMIC);
 		if (!cp) {
-			asd_printk("%s: out of memory\n", __FUNCTION__);
+			asd_printk("%s: out of memory\n", __func__);
 			goto out;
 		}
 		ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
@@ -446,7 +446,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 		struct domain_device *failed_dev = NULL;
 
 		ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n",
-			    __FUNCTION__, dl->status_block[3]);
+			    __func__, dl->status_block[3]);
 
 		/*
 		 * Find the task that caused the abort and abort it first.
@@ -474,7 +474,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 
 		if (!failed_dev) {
 			ASD_DPRINTK("%s: Can't find task (tc=%d) to abort!\n",
-				    __FUNCTION__, tc_abort);
+				    __func__, tc_abort);
 			goto out;
 		}
 
@@ -502,7 +502,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 		conn_handle = *((u16*)(&dl->status_block[1]));
 		conn_handle = le16_to_cpu(conn_handle);
 
-		ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __FUNCTION__,
+		ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __func__,
 			    dl->status_block[3]);
 
 		/* Find the last pending task for the device... */
@@ -522,7 +522,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 
 		if (!last_dev_task) {
 			ASD_DPRINTK("%s: Device reset for idle device %d?\n",
-				    __FUNCTION__, conn_handle);
+				    __func__, conn_handle);
 			goto out;
 		}
 
@@ -549,10 +549,10 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 		goto out;
 	}
 	case SIGNAL_NCQ_ERROR:
-		ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __FUNCTION__);
+		ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __func__);
 		goto out;
 	case CLEAR_NCQ_ERROR:
-		ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __FUNCTION__);
+		ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __func__);
 		goto out;
 	}
 
@@ -560,26 +560,26 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 
 	switch (sb_opcode) {
 	case BYTES_DMAED:
-		ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__, phy_id);
+		ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __func__, phy_id);
 		asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id);
 		break;
 	case PRIMITIVE_RECVD:
-		ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __func__,
 			    phy_id);
 		asd_primitive_rcvd_tasklet(ascb, dl, phy_id);
 		break;
 	case PHY_EVENT:
-		ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__, phy_id);
+		ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __func__, phy_id);
 		asd_phy_event_tasklet(ascb, dl);
 		break;
 	case LINK_RESET_ERROR:
-		ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __func__,
 			    phy_id);
 		asd_link_reset_err_tasklet(ascb, dl, phy_id);
 		break;
 	case TIMER_EVENT:
 		ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
-			    __FUNCTION__, phy_id);
+			    __func__, phy_id);
 		asd_turn_led(asd_ha, phy_id, 0);
 		/* the device is gone */
 		sas_phy_disconnected(sas_phy);
@@ -587,7 +587,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
 		sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
 		break;
 	default:
-		ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __func__,
 			    phy_id, sb_opcode);
 		ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
 			    edb, dl->opcode);
@@ -654,7 +654,7 @@ static void control_phy_tasklet_complete(struct asd_ascb *ascb,
 
 	if (status != 0) {
 		ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
-			    __FUNCTION__, phy_id, status);
+			    __func__, phy_id, status);
 		goto out;
 	}
 
@@ -663,7 +663,7 @@ static void control_phy_tasklet_complete(struct asd_ascb *ascb,
 		asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id);
 		asd_turn_led(asd_ha, phy_id, 0);
 		asd_control_led(asd_ha, phy_id, 0);
-		ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__, phy_id);
+		ASD_DPRINTK("%s: disable phy%d\n", __func__, phy_id);
 		break;
 
 	case ENABLE_PHY:
@@ -673,40 +673,40 @@ static void control_phy_tasklet_complete(struct asd_ascb *ascb,
 			get_lrate_mode(phy, oob_mode);
 			asd_turn_led(asd_ha, phy_id, 1);
 			ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
-				    __FUNCTION__, phy_id,phy->sas_phy.linkrate,
+				    __func__, phy_id,phy->sas_phy.linkrate,
 				    phy->sas_phy.iproto);
 		} else if (oob_status & CURRENT_SPINUP_HOLD) {
 			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
 			asd_turn_led(asd_ha, phy_id, 1);
-			ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__,
+			ASD_DPRINTK("%s: phy%d, spinup hold\n", __func__,
 				    phy_id);
 		} else if (oob_status & CURRENT_ERR_MASK) {
 			asd_turn_led(asd_ha, phy_id, 0);
 			ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
-				    __FUNCTION__, phy_id, oob_status);
+				    __func__, phy_id, oob_status);
 		} else if (oob_status & (CURRENT_HOT_PLUG_CNCT
 					 | CURRENT_DEVICE_PRESENT))  {
 			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
 			asd_turn_led(asd_ha, phy_id, 1);
 			ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
-				    __FUNCTION__, phy_id);
+				    __func__, phy_id);
 		} else {
 			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
 			asd_turn_led(asd_ha, phy_id, 0);
 			ASD_DPRINTK("%s: phy%d: no device present: "
 				    "oob_status:0x%x\n",
-				    __FUNCTION__, phy_id, oob_status);
+				    __func__, phy_id, oob_status);
 		}
 		break;
 	case RELEASE_SPINUP_HOLD:
 	case PHY_NO_OP:
 	case EXECUTE_HARD_RESET:
-		ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __func__,
 			    phy_id, control_phy->sub_func);
 		/* XXX finish */
 		break;
 	default:
-		ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__,
+		ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __func__,
 			    phy_id, control_phy->sub_func);
 		break;
 	}
diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
index 326765c9caf..75d20f72501 100644
--- a/drivers/scsi/aic94xx/aic94xx_task.c
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -320,7 +320,7 @@ Again:
 	case TC_RESUME:
 	case TC_PARTIAL_SG_LIST:
 	default:
-		ASD_DPRINTK("%s: dl opcode: 0x%x?\n", __FUNCTION__, opcode);
+		ASD_DPRINTK("%s: dl opcode: 0x%x?\n", __func__, opcode);
 		break;
 	}
 
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
index 633ff40c736..d4640ef6d44 100644
--- a/drivers/scsi/aic94xx/aic94xx_tmf.c
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -75,12 +75,12 @@ static void asd_clear_nexus_tasklet_complete(struct asd_ascb *ascb,
 					     struct done_list_struct *dl)
 {
 	struct tasklet_completion_status *tcs = ascb->uldd_task;
-	ASD_DPRINTK("%s: here\n", __FUNCTION__);
+	ASD_DPRINTK("%s: here\n", __func__);
 	if (!del_timer(&ascb->timer)) {
-		ASD_DPRINTK("%s: couldn't delete timer\n", __FUNCTION__);
+		ASD_DPRINTK("%s: couldn't delete timer\n", __func__);
 		return;
 	}
-	ASD_DPRINTK("%s: opcode: 0x%x\n", __FUNCTION__, dl->opcode);
+	ASD_DPRINTK("%s: opcode: 0x%x\n", __func__, dl->opcode);
 	tcs->dl_opcode = dl->opcode;
 	complete(ascb->completion);
 	asd_ascb_free(ascb);
@@ -91,7 +91,7 @@ static void asd_clear_nexus_timedout(unsigned long data)
 	struct asd_ascb *ascb = (void *)data;
 	struct tasklet_completion_status *tcs = ascb->uldd_task;
 
-	ASD_DPRINTK("%s: here\n", __FUNCTION__);
+	ASD_DPRINTK("%s: here\n", __func__);
 	tcs->dl_opcode = TMF_RESP_FUNC_FAILED;
 	complete(ascb->completion);
 }
@@ -103,7 +103,7 @@ static void asd_clear_nexus_timedout(unsigned long data)
 	DECLARE_COMPLETION_ONSTACK(completion); \
 	DECLARE_TCS(tcs); \
 		\
-	ASD_DPRINTK("%s: PRE\n", __FUNCTION__); \
+	ASD_DPRINTK("%s: PRE\n", __func__); \
         res = 1;                \
 	ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); \
 	if (!ascb)              \
@@ -115,12 +115,12 @@ static void asd_clear_nexus_timedout(unsigned long data)
 	scb->header.opcode = CLEAR_NEXUS
 
 #define CLEAR_NEXUS_POST        \
-	ASD_DPRINTK("%s: POST\n", __FUNCTION__); \
+	ASD_DPRINTK("%s: POST\n", __func__); \
 	res = asd_enqueue_internal(ascb, asd_clear_nexus_tasklet_complete, \
 				   asd_clear_nexus_timedout);              \
 	if (res)                \
 		goto out_err;   \
-	ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __FUNCTION__); \
+	ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __func__); \
 	wait_for_completion(&completion); \
 	res = tcs.dl_opcode; \
 	if (res == TC_NO_ERROR) \
@@ -417,7 +417,7 @@ int asd_abort_task(struct sas_task *task)
 	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
 		res = TMF_RESP_FUNC_COMPLETE;
-		ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+		ASD_DPRINTK("%s: task 0x%p done\n", __func__, task);
 		goto out_done;
 	}
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
@@ -481,7 +481,7 @@ int asd_abort_task(struct sas_task *task)
 	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
 		res = TMF_RESP_FUNC_COMPLETE;
-		ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+		ASD_DPRINTK("%s: task 0x%p done\n", __func__, task);
 		goto out_done;
 	}
 	spin_unlock_irqrestore(&task->task_state_lock, flags);
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index a715632e19d..47754260228 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -240,7 +240,7 @@ static void __fas216_checkmagic(FAS216_Info *info, const char *func)
 		panic("scsi memory space corrupted in %s", func);
 	}
 }
-#define fas216_checkmagic(info) __fas216_checkmagic((info), __FUNCTION__)
+#define fas216_checkmagic(info) __fas216_checkmagic((info), __func__)
 #else
 #define fas216_checkmagic(info)
 #endif
@@ -2658,7 +2658,7 @@ int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
 	fas216_checkmagic(info);
 
 	printk("scsi%d.%c: %s: resetting host\n",
-		info->host->host_no, '0' + SCpnt->device->id, __FUNCTION__);
+		info->host->host_no, '0' + SCpnt->device->id, __func__);
 
 	/*
 	 * Reset the SCSI chip.
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 6e464488bca..fcdd73f2562 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -97,14 +97,14 @@ static struct request *get_alua_req(struct scsi_device *sdev,
 
 	if (!rq) {
 		sdev_printk(KERN_INFO, sdev,
-			    "%s: blk_get_request failed\n", __FUNCTION__);
+			    "%s: blk_get_request failed\n", __func__);
 		return NULL;
 	}
 
 	if (buflen && blk_rq_map_kern(q, rq, buffer, buflen, GFP_NOIO)) {
 		blk_put_request(rq);
 		sdev_printk(KERN_INFO, sdev,
-			    "%s: blk_rq_map_kern failed\n", __FUNCTION__);
+			    "%s: blk_rq_map_kern failed\n", __func__);
 		return NULL;
 	}
 
@@ -553,7 +553,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 		/* Resubmit with the correct length */
 		if (realloc_buffer(h, len)) {
 			sdev_printk(KERN_WARNING, sdev,
-				    "%s: kmalloc buffer failed\n",__FUNCTION__);
+				    "%s: kmalloc buffer failed\n",__func__);
 			/* Temporary failure, bypass */
 			return SCSI_DH_DEV_TEMP_BUSY;
 		}
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index de2c34abddf..4bf6e374f07 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -704,8 +704,8 @@ struct ibmvfc_host {
 			dev_err((vhost)->dev, ##__VA_ARGS__); \
 	} while (0)
 
-#define ENTER DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Entering %s\n", __FUNCTION__))
-#define LEAVE DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Leaving %s\n", __FUNCTION__))
+#define ENTER DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Entering %s\n", __func__))
+#define LEAVE DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Leaving %s\n", __func__))
 
 #ifdef CONFIG_SCSI_IBMVFC_TRACE
 #define ibmvfc_create_trace_file(kobj, attr) sysfs_create_bin_file(kobj, attr)
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index 3b9514c8f1f..d6f68f22cf7 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -55,7 +55,7 @@
 /* tmp - will replace with SCSI logging stuff */
 #define eprintk(fmt, args...)					\
 do {								\
-	printk("%s(%d) " fmt, __FUNCTION__, __LINE__, ##args);	\
+	printk("%s(%d) " fmt, __func__, __LINE__, ##args);	\
 } while (0)
 /* #define dprintk eprintk */
 #define dprintk(fmt, args...)
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index f97d172844b..c2a9a13d788 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -163,7 +163,7 @@ static int imm_proc_info(struct Scsi_Host *host, char *buffer, char **start,
 
 #if IMM_DEBUG > 0
 #define imm_fail(x,y) printk("imm: imm_fail(%i) from %s at line %d\n",\
-	   y, __FUNCTION__, __LINE__); imm_fail_func(x,y);
+	   y, __func__, __LINE__); imm_fail_func(x,y);
 static inline void
 imm_fail_func(imm_struct *dev, int error_code)
 #else
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index d93156671e9..4871dd1f258 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1403,10 +1403,10 @@ struct ipr_ucode_image_header {
 }
 
 #define ipr_trace ipr_dbg("%s: %s: Line: %d\n",\
-	__FILE__, __FUNCTION__, __LINE__)
+	__FILE__, __func__, __LINE__)
 
-#define ENTER IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Entering %s\n", __FUNCTION__))
-#define LEAVE IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Leaving %s\n", __FUNCTION__))
+#define ENTER IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Entering %s\n", __func__))
+#define LEAVE IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Leaving %s\n", __func__))
 
 #define ipr_err_separator \
 ipr_err("----------------------------------------------------------\n")
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 744f06d04a3..48ee8c7f5bd 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -74,7 +74,7 @@ static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
 		case SAS_OPEN_TO:
 		case SAS_OPEN_REJECT:
 			SAS_DPRINTK("%s: Saw error %d.  What to do?\n",
-				    __FUNCTION__, ts->stat);
+				    __func__, ts->stat);
 			return AC_ERR_OTHER;
 
 		case SAS_ABORTED_TASK:
@@ -115,7 +115,7 @@ static void sas_ata_task_done(struct sas_task *task)
 	} else if (stat->stat != SAM_STAT_GOOD) {
 		ac = sas_to_ata_err(stat);
 		if (ac) {
-			SAS_DPRINTK("%s: SAS error %x\n", __FUNCTION__,
+			SAS_DPRINTK("%s: SAS error %x\n", __func__,
 				    stat->stat);
 			/* We saw a SAS error. Send a vague error. */
 			qc->err_mask = ac;
@@ -244,20 +244,20 @@ static void sas_ata_phy_reset(struct ata_port *ap)
 		res = i->dft->lldd_I_T_nexus_reset(dev);
 
 	if (res != TMF_RESP_FUNC_COMPLETE)
-		SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__);
+		SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __func__);
 
 	switch (dev->sata_dev.command_set) {
 		case ATA_COMMAND_SET:
-			SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__);
+			SAS_DPRINTK("%s: Found ATA device.\n", __func__);
 			ap->link.device[0].class = ATA_DEV_ATA;
 			break;
 		case ATAPI_COMMAND_SET:
-			SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__);
+			SAS_DPRINTK("%s: Found ATAPI device.\n", __func__);
 			ap->link.device[0].class = ATA_DEV_ATAPI;
 			break;
 		default:
 			SAS_DPRINTK("%s: Unknown SATA command set: %d.\n",
-				    __FUNCTION__,
+				    __func__,
 				    dev->sata_dev.command_set);
 			ap->link.device[0].class = ATA_DEV_UNKNOWN;
 			break;
@@ -299,7 +299,7 @@ static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
 {
 	struct domain_device *dev = ap->private_data;
 
-	SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+	SAS_DPRINTK("STUB %s\n", __func__);
 	switch (sc_reg_in) {
 		case SCR_STATUS:
 			dev->sata_dev.sstatus = val;
@@ -324,7 +324,7 @@ static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
 {
 	struct domain_device *dev = ap->private_data;
 
-	SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+	SAS_DPRINTK("STUB %s\n", __func__);
 	switch (sc_reg_in) {
 		case SCR_STATUS:
 			*val = dev->sata_dev.sstatus;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index aefd865a578..3da02e43678 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -121,7 +121,7 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
 			break;
 		} else {
 			SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
-				    "status 0x%x\n", __FUNCTION__,
+				    "status 0x%x\n", __func__,
 				    SAS_ADDR(dev->sas_addr),
 				    task->task_status.resp,
 				    task->task_status.stat);
@@ -1279,7 +1279,7 @@ static int sas_configure_present(struct domain_device *dev, int phy_id,
 			goto out;
 		} else if (res != SMP_RESP_FUNC_ACC) {
 			SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
-				    "result 0x%x\n", __FUNCTION__,
+				    "result 0x%x\n", __func__,
 				    SAS_ADDR(dev->sas_addr), phy_id, i, res);
 			goto out;
 		}
@@ -1901,7 +1901,7 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 
 	if (!rsp) {
 		printk("%s: space for a smp response is missing\n",
-		       __FUNCTION__);
+		       __func__);
 		return -EINVAL;
 	}
 
@@ -1914,20 +1914,20 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 	if (type != SAS_EDGE_EXPANDER_DEVICE &&
 	    type != SAS_FANOUT_EXPANDER_DEVICE) {
 		printk("%s: can we send a smp request to a device?\n",
-		       __FUNCTION__);
+		       __func__);
 		return -EINVAL;
 	}
 
 	dev = sas_find_dev_by_rphy(rphy);
 	if (!dev) {
-		printk("%s: fail to find a domain_device?\n", __FUNCTION__);
+		printk("%s: fail to find a domain_device?\n", __func__);
 		return -EINVAL;
 	}
 
 	/* do we need to support multiple segments? */
 	if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
 		printk("%s: multiple segments req %u %u, rsp %u %u\n",
-		       __FUNCTION__, req->bio->bi_vcnt, req->data_len,
+		       __func__, req->bio->bi_vcnt, req->data_len,
 		       rsp->bio->bi_vcnt, rsp->data_len);
 		return -EINVAL;
 	}
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index 39ae68a3b0e..139935a121b 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -50,7 +50,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 			sas_deform_port(phy);
 		else {
 			SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
-				    __FUNCTION__, phy->id, phy->port->id,
+				    __func__, phy->id, phy->port->id,
 				    phy->port->num_phys);
 			return;
 		}
@@ -78,7 +78,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 
 	if (i >= sas_ha->num_phys) {
 		printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
-		       __FUNCTION__);
+		       __func__);
 		spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
 		return;
 	}
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 601ec5b6a7f..a8e3ef30907 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -343,7 +343,7 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
 						       flags);
 				SAS_DPRINTK("%s: task 0x%p aborted from "
 					    "task_queue\n",
-					    __FUNCTION__, task);
+					    __func__, task);
 				return TASK_IS_ABORTED;
 			}
 		}
@@ -351,13 +351,13 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
 	}
 
 	for (i = 0; i < 5; i++) {
-		SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task);
+		SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task);
 		res = si->dft->lldd_abort_task(task);
 
 		spin_lock_irqsave(&task->task_state_lock, flags);
 		if (task->task_state_flags & SAS_TASK_STATE_DONE) {
 			spin_unlock_irqrestore(&task->task_state_lock, flags);
-			SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+			SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
 				    task);
 			return TASK_IS_DONE;
 		}
@@ -365,24 +365,24 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
 
 		if (res == TMF_RESP_FUNC_COMPLETE) {
 			SAS_DPRINTK("%s: task 0x%p is aborted\n",
-				    __FUNCTION__, task);
+				    __func__, task);
 			return TASK_IS_ABORTED;
 		} else if (si->dft->lldd_query_task) {
 			SAS_DPRINTK("%s: querying task 0x%p\n",
-				    __FUNCTION__, task);
+				    __func__, task);
 			res = si->dft->lldd_query_task(task);
 			switch (res) {
 			case TMF_RESP_FUNC_SUCC:
 				SAS_DPRINTK("%s: task 0x%p at LU\n",
-					    __FUNCTION__, task);
+					    __func__, task);
 				return TASK_IS_AT_LU;
 			case TMF_RESP_FUNC_COMPLETE:
 				SAS_DPRINTK("%s: task 0x%p not at LU\n",
-					    __FUNCTION__, task);
+					    __func__, task);
 				return TASK_IS_NOT_AT_LU;
 			case TMF_RESP_FUNC_FAILED:
                                 SAS_DPRINTK("%s: task 0x%p failed to abort\n",
-                                                __FUNCTION__, task);
+                                                __func__, task);
                                 return TASK_ABORT_FAILED;
                         }
 
@@ -545,7 +545,7 @@ Again:
 
 		if (need_reset) {
 			SAS_DPRINTK("%s: task 0x%p requests reset\n",
-				    __FUNCTION__, task);
+				    __func__, task);
 			goto reset;
 		}
 
@@ -556,13 +556,13 @@ Again:
 
 		switch (res) {
 		case TASK_IS_DONE:
-			SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+			SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
 				    task);
 			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_ABORTED:
 			SAS_DPRINTK("%s: task 0x%p is aborted\n",
-				    __FUNCTION__, task);
+				    __func__, task);
 			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_AT_LU:
@@ -633,7 +633,7 @@ Again:
 	}
 	return list_empty(work_q);
 clear_q:
-	SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__);
+	SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__);
 	list_for_each_entry_safe(cmd, n, work_q, eh_entry)
 		sas_eh_finish_cmd(cmd);
 
@@ -650,7 +650,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
 	list_splice_init(&shost->eh_cmd_q, &eh_work_q);
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
-	SAS_DPRINTK("Enter %s\n", __FUNCTION__);
+	SAS_DPRINTK("Enter %s\n", __func__);
 	/*
 	 * Deal with commands that still have SAS tasks (i.e. they didn't
 	 * complete via the normal sas_task completion mechanism)
@@ -669,7 +669,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
 
 out:
 	scsi_eh_flush_done_q(&ha->eh_done_q);
-	SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
+	SAS_DPRINTK("--- Exit %s\n", __func__);
 	return;
 }
 
@@ -990,7 +990,7 @@ int __sas_task_abort(struct sas_task *task)
 	if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
 	    task->task_state_flags & SAS_TASK_STATE_DONE) {
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
-		SAS_DPRINTK("%s: Task %p already finished.\n", __FUNCTION__,
+		SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
 			    task);
 		return 0;
 	}
diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c
index 6d6a76e65a6..15e2d132e8b 100644
--- a/drivers/scsi/libsrp.c
+++ b/drivers/scsi/libsrp.c
@@ -39,7 +39,7 @@ enum srp_task_attributes {
 /* tmp - will replace with SCSI logging stuff */
 #define eprintk(fmt, args...)					\
 do {								\
-	printk("%s(%d) " fmt, __FUNCTION__, __LINE__, ##args);	\
+	printk("%s(%d) " fmt, __func__, __LINE__, ##args);	\
 } while (0)
 /* #define dprintk eprintk */
 #define dprintk(fmt, args...)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 5b6e5395c8e..d51a2a4b43e 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2083,7 +2083,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 		if (iocbq_entry == NULL) {
 			printk(KERN_ERR "%s: only allocated %d iocbs of "
 				"expected %d count. Unloading driver.\n",
-				__FUNCTION__, i, LPFC_IOCB_LIST_CNT);
+				__func__, i, LPFC_IOCB_LIST_CNT);
 			error = -ENOMEM;
 			goto out_free_iocbq;
 		}
@@ -2093,7 +2093,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 			kfree (iocbq_entry);
 			printk(KERN_ERR "%s: failed to allocate IOTAG. "
 			       "Unloading driver.\n",
-				__FUNCTION__);
+				__func__);
 			error = -ENOMEM;
 			goto out_free_iocbq;
 		}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c94da4f2b8a..1bcebbd3dfa 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -341,7 +341,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
 			printk(KERN_ERR "%s: Too many sg segments from "
 			       "dma_map_sg.  Config %d, seg_cnt %d",
-			       __FUNCTION__, phba->cfg_sg_seg_cnt,
+			       __func__, phba->cfg_sg_seg_cnt,
 			       lpfc_cmd->seg_cnt);
 			scsi_dma_unmap(scsi_cmnd);
 			return 1;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f40aa7b905f..50fe0764673 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -219,7 +219,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
 	case CMD_IOCB_LOGENTRY_CN:
 	case CMD_IOCB_LOGENTRY_ASYNC_CN:
 		printk("%s - Unhandled SLI-3 Command x%x\n",
-				__FUNCTION__, iocb_cmnd);
+				__func__, iocb_cmnd);
 		type = LPFC_UNKNOWN_IOCB;
 		break;
 	default:
@@ -1715,7 +1715,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
 		rspiocbp = __lpfc_sli_get_iocbq(phba);
 		if (rspiocbp == NULL) {
 			printk(KERN_ERR "%s: out of buffers! Failing "
-			       "completion.\n", __FUNCTION__);
+			       "completion.\n", __func__);
 			break;
 		}
 
@@ -3793,7 +3793,7 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport,
 		break;
 	default:
 		printk(KERN_ERR "%s: Unknown context cmd type, value %d\n",
-			__FUNCTION__, ctx_cmd);
+			__func__, ctx_cmd);
 		break;
 	}
 
diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h
index f62ed468ada..5ead1283a84 100644
--- a/drivers/scsi/megaraid/mega_common.h
+++ b/drivers/scsi/megaraid/mega_common.h
@@ -265,7 +265,7 @@ typedef struct {
 #define ASSERT(expression)						\
 	if (!(expression)) {						\
 	ASSERT_ACTION("assertion failed:(%s), file: %s, line: %d:%s\n",	\
-			#expression, __FILE__, __LINE__, __FUNCTION__);	\
+			#expression, __FILE__, __LINE__, __func__);	\
 	}
 #else
 #define ASSERT(expression)
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 70a0f11f48b..805bb61dde1 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -458,7 +458,7 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	if (adapter == NULL) {
 		con_log(CL_ANN, (KERN_WARNING
-		"megaraid: out of memory, %s %d.\n", __FUNCTION__, __LINE__));
+		"megaraid: out of memory, %s %d.\n", __func__, __LINE__));
 
 		goto out_probe_one;
 	}
@@ -1002,7 +1002,7 @@ megaraid_alloc_cmd_packets(adapter_t *adapter)
 
 	if (!raid_dev->una_mbox64) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 		return -1;
 	}
@@ -1030,7 +1030,7 @@ megaraid_alloc_cmd_packets(adapter_t *adapter)
 	if (!adapter->ibuf) {
 
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 
 		goto out_free_common_mbox;
@@ -1052,7 +1052,7 @@ megaraid_alloc_cmd_packets(adapter_t *adapter)
 
 	if (adapter->kscb_list == NULL) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 		goto out_free_ibuf;
 	}
@@ -1060,7 +1060,7 @@ megaraid_alloc_cmd_packets(adapter_t *adapter)
 	// memory allocation for our command packets
 	if (megaraid_mbox_setup_dma_pools(adapter) != 0) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 		goto out_free_scb_list;
 	}
@@ -2981,7 +2981,7 @@ megaraid_mbox_product_info(adapter_t *adapter)
 
 	if (pinfo == NULL) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 
 		return -1;
@@ -3508,7 +3508,7 @@ megaraid_cmm_register(adapter_t *adapter)
 
 	if (adapter->uscb_list == NULL) {
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 		return -1;
 	}
@@ -3879,7 +3879,7 @@ megaraid_sysfs_alloc_resources(adapter_t *adapter)
 		!raid_dev->sysfs_buffer) {
 
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid: out of memory, %s %d\n", __func__,
 			__LINE__));
 
 		rval = -ENOMEM;
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index ac3b280c2a7..f680561d2c6 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -929,7 +929,7 @@ mraid_mm_register_adp(mraid_mmadp_t *lld_adp)
 			!adapter->pthru_dma_pool) {
 
 		con_log(CL_ANN, (KERN_WARNING
-			"megaraid cmm: out of memory, %s %d\n", __FUNCTION__,
+			"megaraid cmm: out of memory, %s %d\n", __func__,
 			__LINE__));
 
 		rval = (-ENOMEM);
@@ -957,7 +957,7 @@ mraid_mm_register_adp(mraid_mmadp_t *lld_adp)
 
 			con_log(CL_ANN, (KERN_WARNING
 				"megaraid cmm: out of memory, %s %d\n",
-					__FUNCTION__, __LINE__));
+					__func__, __LINE__));
 
 			rval = (-ENOMEM);
 
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 7fed3537215..edf9fdb3cb3 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -299,9 +299,9 @@ static struct scsi_host_template nsp32_template = {
 #else
 # define NSP32_DEBUG_MASK	      0xffffff
 # define nsp32_msg(type, args...) \
-	nsp32_message (__FUNCTION__, __LINE__, (type), args)
+	nsp32_message (__func__, __LINE__, (type), args)
 # define nsp32_dbg(mask, args...) \
-	nsp32_dmessage(__FUNCTION__, __LINE__, (mask), args)
+	nsp32_dmessage(__func__, __LINE__, (mask), args)
 #endif
 
 #define NSP32_DEBUG_QUEUECOMMAND	BIT(0)
diff --git a/drivers/scsi/nsp32_debug.c b/drivers/scsi/nsp32_debug.c
index ef3c59cbcff..2fb3fb58858 100644
--- a/drivers/scsi/nsp32_debug.c
+++ b/drivers/scsi/nsp32_debug.c
@@ -88,7 +88,7 @@ static void print_commandk (unsigned char *command)
 	int i,s;
 //	printk(KERN_DEBUG);
 	print_opcodek(command[0]);
-	/*printk(KERN_DEBUG "%s ", __FUNCTION__);*/
+	/*printk(KERN_DEBUG "%s ", __func__);*/
 	if ((command[0] >> 5) == 6 ||
 	    (command[0] >> 5) == 7 ) {
 		s = 12; /* vender specific */
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 5082ca3c687..a221b6ef9fa 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -107,9 +107,9 @@ static nsp_hw_data nsp_data_base; /* attach <-> detect glue */
 #else
 # define NSP_DEBUG_MASK		0xffffff
 # define nsp_msg(type, args...) \
-	nsp_cs_message (__FUNCTION__, __LINE__, (type), args)
+	nsp_cs_message (__func__, __LINE__, (type), args)
 # define nsp_dbg(mask, args...) \
-	nsp_cs_dmessage(__FUNCTION__, __LINE__, (mask), args)
+	nsp_cs_dmessage(__func__, __LINE__, (mask), args)
 #endif
 
 #define NSP_DEBUG_QUEUECOMMAND		BIT(0)
diff --git a/drivers/scsi/pcmcia/nsp_debug.c b/drivers/scsi/pcmcia/nsp_debug.c
index 2f75fe6e35a..3c6ef64fcbf 100644
--- a/drivers/scsi/pcmcia/nsp_debug.c
+++ b/drivers/scsi/pcmcia/nsp_debug.c
@@ -90,7 +90,7 @@ static void print_commandk (unsigned char *command)
 	int i, s;
 	printk(KERN_DEBUG);
 	print_opcodek(command[0]);
-	/*printk(KERN_DEBUG "%s ", __FUNCTION__);*/
+	/*printk(KERN_DEBUG "%s ", __func__);*/
 	if ((command[0] >> 5) == 6 ||
 	    (command[0] >> 5) == 7 ) {
 		s = 12; /* vender specific */
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index f655ae320b4..8aa0bd987e2 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -171,7 +171,7 @@ static int device_check(ppa_struct *dev);
 
 #if PPA_DEBUG > 0
 #define ppa_fail(x,y) printk("ppa: ppa_fail(%i) from %s at line %d\n",\
-	   y, __FUNCTION__, __LINE__); ppa_fail_func(x,y);
+	   y, __func__, __LINE__); ppa_fail_func(x,y);
 static inline void ppa_fail_func(ppa_struct *dev, int error_code)
 #else
 static inline void ppa_fail(ppa_struct *dev, int error_code)
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 3754ab87f89..37f9ba0cd79 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1695,7 +1695,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 	risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
 
 	dprintk(1, "%s: DMA RISC code (%i) words\n",
-			__FUNCTION__, risc_code_size);
+			__func__, risc_code_size);
 
 	num = 0;
 	while (risc_code_size > 0) {
@@ -1721,7 +1721,7 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 		mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
 		mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
 		dprintk(2, "%s: op=%d  0x%p = 0x%4x,0x%4x,0x%4x,0x%4x\n",
-				__FUNCTION__, mb[0],
+				__func__, mb[0],
 				(void *)(long)ha->request_dma,
 				mb[6], mb[7], mb[2], mb[3]);
 		err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
@@ -1753,10 +1753,10 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 			if (tbuf[i] != sp[i] && warn++ < 10) {
 				printk(KERN_ERR "%s: FW compare error @ "
 						"byte(0x%x) loop#=%x\n",
-						__FUNCTION__, i, num);
+						__func__, i, num);
 				printk(KERN_ERR "%s: FWbyte=%x  "
 						"FWfromChip=%x\n",
-						__FUNCTION__, sp[i], tbuf[i]);
+						__func__, sp[i], tbuf[i]);
 				/*break; */
 			}
 		}
@@ -1781,7 +1781,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
 	int err;
 
 	dprintk(1, "%s: Verifying checksum of loaded RISC code.\n",
-			__FUNCTION__);
+			__func__);
 
 	/* Verify checksum of loaded RISC code. */
 	mb[0] = MBC_VERIFY_CHECKSUM;
@@ -1794,7 +1794,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
 	}
 
 	/* Start firmware execution. */
-	dprintk(1, "%s: start firmware running.\n", __FUNCTION__);
+	dprintk(1, "%s: start firmware running.\n", __func__);
 	mb[0] = MBC_EXECUTE_FIRMWARE;
 	mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
 	err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 01d11a01ffb..27c633f5579 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1753,7 +1753,7 @@ static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev)
 		open_devip = sdebug_device_create(sdbg_host, GFP_ATOMIC);
 		if (!open_devip) {
 			printk(KERN_ERR "%s: out of memory at line %d\n",
-				__FUNCTION__, __LINE__);
+				__func__, __LINE__);
 			return NULL;
 		}
 	}
@@ -2656,7 +2656,7 @@ static int sdebug_add_adapter(void)
         sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL);
         if (NULL == sdbg_host) {
                 printk(KERN_ERR "%s: out of memory at line %d\n",
-                       __FUNCTION__, __LINE__);
+                       __func__, __LINE__);
                 return -ENOMEM;
         }
 
@@ -2667,7 +2667,7 @@ static int sdebug_add_adapter(void)
 		sdbg_devinfo = sdebug_device_create(sdbg_host, GFP_KERNEL);
 		if (!sdbg_devinfo) {
                         printk(KERN_ERR "%s: out of memory at line %d\n",
-                               __FUNCTION__, __LINE__);
+                               __func__, __LINE__);
                         error = -ENOMEM;
 			goto clean;
                 }
@@ -2987,7 +2987,7 @@ static int sdebug_driver_probe(struct device * dev)
 
         hpnt = scsi_host_alloc(&sdebug_driver_template, sizeof(sdbg_host));
         if (NULL == hpnt) {
-                printk(KERN_ERR "%s: scsi_register failed\n", __FUNCTION__);
+                printk(KERN_ERR "%s: scsi_register failed\n", __func__);
                 error = -ENODEV;
 		return error;
         }
@@ -3002,7 +3002,7 @@ static int sdebug_driver_probe(struct device * dev)
 
         error = scsi_add_host(hpnt, &sdbg_host->dev);
         if (error) {
-                printk(KERN_ERR "%s: scsi_add_host failed\n", __FUNCTION__);
+                printk(KERN_ERR "%s: scsi_add_host failed\n", __func__);
                 error = -ENODEV;
 		scsi_host_put(hpnt);
         } else
@@ -3021,7 +3021,7 @@ static int sdebug_driver_remove(struct device * dev)
 
 	if (!sdbg_host) {
 		printk(KERN_ERR "%s: Unable to locate host info\n",
-		       __FUNCTION__);
+		       __func__);
 		return -ENODEV;
 	}
 
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index a235802f298..4969e4ec75e 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -272,7 +272,7 @@ static void scsi_strcpy_devinfo(char *name, char *to, size_t to_length,
 	}
 	if (from_length > to_length)
 		 printk(KERN_WARNING "%s: %s string '%s' is too long\n",
-			__FUNCTION__, name, from);
+			__func__, name, from);
 }
 
 /**
@@ -298,7 +298,7 @@ static int scsi_dev_info_list_add(int compatible, char *vendor, char *model,
 
 	devinfo = kmalloc(sizeof(*devinfo), GFP_KERNEL);
 	if (!devinfo) {
-		printk(KERN_ERR "%s: no memory\n", __FUNCTION__);
+		printk(KERN_ERR "%s: no memory\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -363,7 +363,7 @@ static int scsi_dev_info_list_add_str(char *dev_list)
 			strflags = strsep(&next, next_check);
 		if (!model || !strflags) {
 			printk(KERN_ERR "%s: bad dev info string '%s' '%s'"
-			       " '%s'\n", __FUNCTION__, vendor, model,
+			       " '%s'\n", __func__, vendor, model,
 			       strflags);
 			res = -EINVAL;
 		} else
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 171b82d748c..880051c89bd 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -139,7 +139,7 @@ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout,
 	scmd->eh_timeout.function = (void (*)(unsigned long)) complete;
 
 	SCSI_LOG_ERROR_RECOVERY(5, printk("%s: scmd: %p, time:"
-					  " %d, (%p)\n", __FUNCTION__,
+					  " %d, (%p)\n", __func__,
 					  scmd, timeout, complete));
 
 	add_timer(&scmd->eh_timeout);
@@ -163,7 +163,7 @@ int scsi_delete_timer(struct scsi_cmnd *scmd)
 	rtn = del_timer(&scmd->eh_timeout);
 
 	SCSI_LOG_ERROR_RECOVERY(5, printk("%s: scmd: %p,"
-					 " rtn: %d\n", __FUNCTION__,
+					 " rtn: %d\n", __func__,
 					 scmd, rtn));
 
 	scmd->eh_timeout.data = (unsigned long)NULL;
@@ -233,7 +233,7 @@ int scsi_block_when_processing_errors(struct scsi_device *sdev)
 
 	online = scsi_device_online(sdev);
 
-	SCSI_LOG_ERROR_RECOVERY(5, printk("%s: rtn: %d\n", __FUNCTION__,
+	SCSI_LOG_ERROR_RECOVERY(5, printk("%s: rtn: %d\n", __func__,
 					  online));
 
 	return online;
@@ -271,7 +271,7 @@ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
 			SCSI_LOG_ERROR_RECOVERY(3,
 				sdev_printk(KERN_INFO, sdev,
 					    "%s: cmds failed: %d, cancel: %d\n",
-					    __FUNCTION__, cmd_failed,
+					    __func__, cmd_failed,
 					    cmd_cancel));
 			cmd_cancel = 0;
 			cmd_failed = 0;
@@ -473,7 +473,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
 
 	SCSI_LOG_ERROR_RECOVERY(3,
 		printk("%s scmd: %p result: %x\n",
-			__FUNCTION__, scmd, scmd->result));
+			__func__, scmd, scmd->result));
 
 	eh_action = scmd->device->host->eh_action;
 	if (eh_action)
@@ -490,7 +490,7 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd)
 	int rtn;
 
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
-					  __FUNCTION__));
+					  __func__));
 
 	if (!scmd->device->host->hostt->eh_host_reset_handler)
 		return FAILED;
@@ -519,7 +519,7 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
 	int rtn;
 
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
-					  __FUNCTION__));
+					  __func__));
 
 	if (!scmd->device->host->hostt->eh_bus_reset_handler)
 		return FAILED;
@@ -774,7 +774,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
 
 	SCSI_LOG_ERROR_RECOVERY(3,
 		printk("%s: scmd: %p, timeleft: %ld\n",
-			__FUNCTION__, scmd, timeleft));
+			__func__, scmd, timeleft));
 
 	/*
 	 * If there is time left scsi_eh_done got called, and we will
@@ -786,7 +786,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
 		rtn = scsi_eh_completed_normally(scmd);
 		SCSI_LOG_ERROR_RECOVERY(3,
 			printk("%s: scsi_eh_completed_normally %x\n",
-			       __FUNCTION__, rtn));
+			       __func__, rtn));
 
 		switch (rtn) {
 		case SUCCESS:
@@ -921,7 +921,7 @@ retry_tur:
 	rtn = scsi_send_eh_cmnd(scmd, tur_command, 6, SENSE_TIMEOUT, 0);
 
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
-		__FUNCTION__, scmd, rtn));
+		__func__, scmd, rtn));
 
 	switch (rtn) {
 	case NEEDS_RETRY:
@@ -1304,7 +1304,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 	if (!scsi_device_online(scmd->device)) {
 		SCSI_LOG_ERROR_RECOVERY(5, printk("%s: device offline - report"
 						  " as SUCCESS\n",
-						  __FUNCTION__));
+						  __func__));
 		return SUCCESS;
 	}
 
@@ -1519,7 +1519,7 @@ static void scsi_restart_operations(struct Scsi_Host *shost)
 	 * ioctls to queued block devices.
 	 */
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: waking up host to restart\n",
-					  __FUNCTION__));
+					  __func__));
 
 	spin_lock_irqsave(shost->host_lock, flags);
 	if (scsi_host_set_state(shost, SHOST_RUNNING))
@@ -1843,7 +1843,7 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
 	 */
 	SCSI_LOG_ERROR_RECOVERY(3,
 		printk("%s: waking up host to restart after TMF\n",
-		__FUNCTION__));
+		__func__));
 
 	wake_up(&shost->host_wait);
 
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 6d62be664d5..ff5d56b3ee4 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1395,7 +1395,7 @@ static void scsi_kill_request(struct request *req, struct request_queue *q)
 
 	if (unlikely(cmd == NULL)) {
 		printk(KERN_CRIT "impossible request in %s.\n",
-				 __FUNCTION__);
+				 __func__);
 		BUG();
 	}
 
@@ -1519,7 +1519,7 @@ static void scsi_request_fn(struct request_queue *q)
 			printk(KERN_CRIT "impossible request in %s.\n"
 					 "please mail a stack trace to "
 					 "linux-scsi@vger.kernel.org\n",
-					 __FUNCTION__);
+					 __func__);
 			blk_dump_rq_flags(req, "foo");
 			BUG();
 		}
@@ -2529,7 +2529,7 @@ void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count,
 	if (unlikely(i == sg_count)) {
 		printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, "
 			"elements %d\n",
-		       __FUNCTION__, sg_len, *offset, sg_count);
+		       __func__, sg_len, *offset, sg_count);
 		WARN_ON(1);
 		return NULL;
 	}
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index 370c78cc1cb..ae7ed9a2266 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -55,7 +55,7 @@ scsi_nl_rcv_msg(struct sk_buff *skb)
 		if ((nlh->nlmsg_len < (sizeof(*nlh) + sizeof(*hdr))) ||
 		    (skb->len < nlh->nlmsg_len)) {
 			printk(KERN_WARNING "%s: discarding partial skb\n",
-				 __FUNCTION__);
+				 __func__);
 			return;
 		}
 
@@ -82,7 +82,7 @@ scsi_nl_rcv_msg(struct sk_buff *skb)
 
 		if (nlh->nlmsg_len < (sizeof(*nlh) + hdr->msglen)) {
 			printk(KERN_WARNING "%s: discarding partial message\n",
-				 __FUNCTION__);
+				 __func__);
 			return;
 		}
 
@@ -139,7 +139,7 @@ scsi_netlink_init(void)
 	error = netlink_register_notifier(&scsi_netlink_notifier);
 	if (error) {
 		printk(KERN_ERR "%s: register of event handler failed - %d\n",
-				__FUNCTION__, error);
+				__func__, error);
 		return;
 	}
 
@@ -148,7 +148,7 @@ scsi_netlink_init(void)
 				THIS_MODULE);
 	if (!scsi_nl_sock) {
 		printk(KERN_ERR "%s: register of recieve handler failed\n",
-				__FUNCTION__);
+				__func__);
 		netlink_unregister_notifier(&scsi_netlink_notifier);
 	}
 
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index e4a0d2f9b35..c6a904a45bf 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -114,7 +114,7 @@ void scsi_proc_hostdir_add(struct scsi_host_template *sht)
 		sht->proc_dir = proc_mkdir(sht->proc_name, proc_scsi);
         	if (!sht->proc_dir)
 			printk(KERN_ERR "%s: proc_mkdir failed for %s\n",
-			       __FUNCTION__, sht->proc_name);
+			       __func__, sht->proc_name);
 		else
 			sht->proc_dir->owner = sht->module;
 	}
@@ -157,7 +157,7 @@ void scsi_proc_host_add(struct Scsi_Host *shost)
 			sht->proc_dir, proc_scsi_read, shost);
 	if (!p) {
 		printk(KERN_ERR "%s: Failed to register host %d in"
-		       "%s\n", __FUNCTION__, shost->host_no,
+		       "%s\n", __func__, shost->host_no,
 		       sht->proc_name);
 		return;
 	} 
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index b7b74489fce..84b4879cff1 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -318,7 +318,7 @@ out_device_destroy:
 	put_device(&sdev->sdev_gendev);
 out:
 	if (display_failure_msg)
-		printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+		printk(ALLOC_FAILURE_MSG, __func__);
 	return NULL;
 }
 
@@ -404,7 +404,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
 
 	starget = kzalloc(size, GFP_KERNEL);
 	if (!starget) {
-		printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
+		printk(KERN_ERR "%s: allocation failure\n", __func__);
 		return NULL;
 	}
 	dev = &starget->dev;
@@ -1337,7 +1337,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 	lun_data = kmalloc(length, GFP_ATOMIC |
 			   (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0));
 	if (!lun_data) {
-		printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+		printk(ALLOC_FAILURE_MSG, __func__);
 		goto out;
 	}
 
@@ -1649,7 +1649,7 @@ int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel,
 {
 	SCSI_LOG_SCAN_BUS(3, shost_printk (KERN_INFO, shost,
 		"%s: <%u:%u:%u>\n",
-		__FUNCTION__, channel, id, lun));
+		__func__, channel, id, lun));
 
 	if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
 	    ((id != SCAN_WILD_CARD) && (id >= shost->max_id)) ||
@@ -1703,7 +1703,7 @@ static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
 		return NULL;
 
 	if (shost->async_scan) {
-		printk("%s called twice for host %d", __FUNCTION__,
+		printk("%s called twice for host %d", __func__,
 				shost->host_no);
 		dump_stack();
 		return NULL;
@@ -1757,7 +1757,7 @@ static void scsi_finish_async_scan(struct async_scan_data *data)
 	mutex_lock(&shost->scan_mutex);
 
 	if (!shost->async_scan) {
-		printk("%s called twice for host %d", __FUNCTION__,
+		printk("%s called twice for host %d", __func__,
 				shost->host_no);
 		dump_stack();
 		mutex_unlock(&shost->scan_mutex);
diff --git a/drivers/scsi/scsi_tgt_priv.h b/drivers/scsi/scsi_tgt_priv.h
index cb92888948f..fe4c62177f7 100644
--- a/drivers/scsi/scsi_tgt_priv.h
+++ b/drivers/scsi/scsi_tgt_priv.h
@@ -6,7 +6,7 @@ struct task_struct;
 /* tmp - will replace with SCSI logging stuff */
 #define eprintk(fmt, args...)					\
 do {								\
-	printk("%s(%d) " fmt, __FUNCTION__, __LINE__, ##args);	\
+	printk("%s(%d) " fmt, __func__, __LINE__, ##args);	\
 } while (0)
 
 #define dprintk(fmt, args...)
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index a272b9a2c86..56823fd1fb8 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -571,7 +571,7 @@ send_fail:
 	name = get_fc_host_event_code_name(event_code);
 	printk(KERN_WARNING
 		"%s: Dropped Event : host %d %s data 0x%08x - err %d\n",
-		__FUNCTION__, shost->host_no,
+		__func__, shost->host_no,
 		(name) ? name : "<unknown>", event_data, err);
 	return;
 }
@@ -644,7 +644,7 @@ send_vendor_fail_skb:
 send_vendor_fail:
 	printk(KERN_WARNING
 		"%s: Dropped Event : host %d vendor_unique - err %d\n",
-		__FUNCTION__, shost->host_no, err);
+		__func__, shost->host_no, err);
 	return;
 }
 EXPORT_SYMBOL(fc_host_post_vendor_event);
@@ -2464,7 +2464,7 @@ fc_rport_create(struct Scsi_Host *shost, int channel,
 	size = (sizeof(struct fc_rport) + fci->f->dd_fcrport_size);
 	rport = kzalloc(size, GFP_KERNEL);
 	if (unlikely(!rport)) {
-		printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
+		printk(KERN_ERR "%s: allocation failure\n", __func__);
 		return NULL;
 	}
 
@@ -3137,7 +3137,7 @@ fc_vport_create(struct Scsi_Host *shost, int channel, struct device *pdev,
 	size = (sizeof(struct fc_vport) + fci->f->dd_fcvport_size);
 	vport = kzalloc(size, GFP_KERNEL);
 	if (unlikely(!vport)) {
-		printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
+		printk(KERN_ERR "%s: allocation failure\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -3201,7 +3201,7 @@ fc_vport_create(struct Scsi_Host *shost, int channel, struct device *pdev,
 			printk(KERN_ERR
 				"%s: Cannot create vport symlinks for "
 				"%s, err=%d\n",
-				__FUNCTION__, dev->bus_id, error);
+				__func__, dev->bus_id, error);
 	}
 	spin_lock_irqsave(shost->host_lock, flags);
 	vport->flags &= ~FC_VPORT_CREATING;
@@ -3314,7 +3314,7 @@ fc_vport_sched_delete(struct work_struct *work)
 	if (stat)
 		dev_printk(KERN_ERR, vport->dev.parent,
 			"%s: %s could not be deleted created via "
-			"shost%d channel %d - error %d\n", __FUNCTION__,
+			"shost%d channel %d - error %d\n", __func__,
 			vport->dev.bus_id, vport->shost->host_no,
 			vport->channel, stat);
 }
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index f4461d35ffb..366609386be 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -779,7 +779,7 @@ static void sas_port_create_link(struct sas_port *port,
 	return;
 err:
 	printk(KERN_ERR "%s: Cannot create port links, err=%d\n",
-	       __FUNCTION__, res);
+	       __func__, res);
 }
 
 static void sas_port_delete_link(struct sas_port *port,
@@ -1029,7 +1029,7 @@ void sas_port_mark_backlink(struct sas_port *port)
 	return;
 err:
 	printk(KERN_ERR "%s: Cannot create port backlink, err=%d\n",
-	       __FUNCTION__, res);
+	       __func__, res);
 
 }
 EXPORT_SYMBOL(sas_port_mark_backlink);
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 5b04ddfed26..1723d71cbf3 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -452,7 +452,7 @@ static int dc390_pci_map (struct dc390_srb* pSRB)
 		/* TODO: error handling */
 		if (pSRB->SGcount != 1)
 			error = 1;
-		DEBUG1(printk("%s(): Mapped sense buffer %p at %x\n", __FUNCTION__, pcmd->sense_buffer, cmdp->saved_dma_handle));
+		DEBUG1(printk("%s(): Mapped sense buffer %p at %x\n", __func__, pcmd->sense_buffer, cmdp->saved_dma_handle));
 	/* Map SG list */
 	} else if (scsi_sg_count(pcmd)) {
 		int nseg;
@@ -466,7 +466,7 @@ static int dc390_pci_map (struct dc390_srb* pSRB)
 		if (nseg < 0)
 			error = 1;
 		DEBUG1(printk("%s(): Mapped SG %p with %d (%d) elements\n",\
-			      __FUNCTION__, scsi_sglist(pcmd), nseg, scsi_sg_count(pcmd)));
+			      __func__, scsi_sglist(pcmd), nseg, scsi_sg_count(pcmd)));
 	/* Map single segment */
 	} else
 		pSRB->SGcount = 0;
@@ -483,11 +483,11 @@ static void dc390_pci_unmap (struct dc390_srb* pSRB)
 
 	if (pSRB->SRBFlag) {
 		pci_unmap_sg(pdev, &pSRB->Segmentx, 1, DMA_FROM_DEVICE);
-		DEBUG1(printk("%s(): Unmapped sense buffer at %x\n", __FUNCTION__, cmdp->saved_dma_handle));
+		DEBUG1(printk("%s(): Unmapped sense buffer at %x\n", __func__, cmdp->saved_dma_handle));
 	} else {
 		scsi_dma_unmap(pcmd);
 		DEBUG1(printk("%s(): Unmapped SG at %p with %d elements\n",
-			      __FUNCTION__, scsi_sglist(pcmd), scsi_sg_count(pcmd)));
+			      __func__, scsi_sglist(pcmd), scsi_sg_count(pcmd)));
 	}
 }
 
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index c975c01b3a0..d4c13561f4a 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -148,7 +148,7 @@
  *
  * 2002/10/04 - Alan Cox <alan@redhat.com>
  *
- * Use dev_id for interrupts, kill __FUNCTION__ pasting
+ * Use dev_id for interrupts, kill __func__ pasting
  * Add a lock for the scb pool, clean up all other cli/sti usage stuff
  * Use the adapter lock for the other places we had the cli's
  *
@@ -640,12 +640,12 @@ static int __init wd7000_setup(char *str)
 	(void) get_options(str, ARRAY_SIZE(ints), ints);
 
 	if (wd7000_card_num >= NUM_CONFIGS) {
-		printk(KERN_ERR "%s: Too many \"wd7000=\" configurations in " "command line!\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Too many \"wd7000=\" configurations in " "command line!\n", __func__);
 		return 0;
 	}
 
 	if ((ints[0] < 3) || (ints[0] > 5)) {
-		printk(KERN_ERR "%s: Error in command line!  " "Usage: wd7000=<IRQ>,<DMA>,IO>[,<BUS_ON>" "[,<BUS_OFF>]]\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Error in command line!  " "Usage: wd7000=<IRQ>,<DMA>,IO>[,<BUS_ON>" "[,<BUS_OFF>]]\n", __func__);
 	} else {
 		for (i = 0; i < NUM_IRQS; i++)
 			if (ints[1] == wd7000_irq[i])
@@ -1642,7 +1642,7 @@ static int wd7000_biosparam(struct scsi_device *sdev,
 			ip[2] = info[2];
 
 			if (info[0] == 255)
-				printk(KERN_INFO "%s: current partition table is " "using extended translation.\n", __FUNCTION__);
+				printk(KERN_INFO "%s: current partition table is " "using extended translation.\n", __func__);
 		}
 	}
 
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index 4b5f908d35c..3c4a300494a 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -68,11 +68,11 @@ lasi_scsi_clock(void * hpa, int defaultclock)
 	if (status == PDC_RET_OK) {
 		clock = (int) pdc_result[16];
 	} else {
-		printk(KERN_WARNING "%s: pdc_iodc_read returned %d\n", __FUNCTION__, status);
+		printk(KERN_WARNING "%s: pdc_iodc_read returned %d\n", __func__, status);
 		clock = defaultclock; 
 	}
 
-	printk(KERN_DEBUG "%s: SCSI clock %d\n", __FUNCTION__, clock);
+	printk(KERN_DEBUG "%s: SCSI clock %d\n", __func__, clock);
  	return clock;
 }
 #endif
@@ -108,13 +108,13 @@ zalon_probe(struct parisc_device *dev)
 	*/
 	dev->irq = gsc_alloc_irq(&gsc_irq);
 
-	printk(KERN_INFO "%s: Zalon version %d, IRQ %d\n", __FUNCTION__,
+	printk(KERN_INFO "%s: Zalon version %d, IRQ %d\n", __func__,
 		zalon_vers, dev->irq);
 
 	__raw_writel(gsc_irq.txn_addr | gsc_irq.txn_data, zalon + IO_MODULE_EIM);
 
 	if (zalon_vers == 0)
-		printk(KERN_WARNING "%s: Zalon 1.1 or earlier\n", __FUNCTION__);
+		printk(KERN_WARNING "%s: Zalon 1.1 or earlier\n", __func__);
 
 	memset(&device, 0, sizeof(struct ncr_device));
 
-- 
cgit v1.2.3


From c5b61d59a685b1227b8a994b52a9b0bd68dc8da8 Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sun, 27 Jul 2008 18:32:50 +0200
Subject: Fix namespace issue with Hisax

you can pull this  git://git./linux/kernel/git/kkeil/ISDN-2.6 master

rename release_tei() to TEIrelease() because release_tei() was
already exported bei the old HiSax driver.

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/mISDN/layer2.c | 2 +-
 drivers/isdn/mISDN/layer2.h | 2 +-
 drivers/isdn/mISDN/tei.c    | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
index f5ad888ee71..a7915a156c0 100644
--- a/drivers/isdn/mISDN/layer2.c
+++ b/drivers/isdn/mISDN/layer2.c
@@ -2030,7 +2030,7 @@ release_l2(struct layer2 *l2)
 	skb_queue_purge(&l2->down_queue);
 	ReleaseWin(l2);
 	if (test_bit(FLG_LAPD, &l2->flag)) {
-		release_tei(l2);
+		TEIrelease(l2);
 		if (l2->ch.st)
 			l2->ch.st->dev->D.ctrl(&l2->ch.st->dev->D,
 			    CLOSE_CHANNEL, NULL);
diff --git a/drivers/isdn/mISDN/layer2.h b/drivers/isdn/mISDN/layer2.h
index de2dd02056a..6293f80dc2d 100644
--- a/drivers/isdn/mISDN/layer2.h
+++ b/drivers/isdn/mISDN/layer2.h
@@ -96,7 +96,7 @@ extern int		tei_l2(struct layer2 *, u_int, u_long arg);
 
 /* from tei.c */
 extern int 		l2_tei(struct layer2 *, u_int, u_long arg);
-extern void 		release_tei(struct layer2 *);
+extern void 		TEIrelease(struct layer2 *);
 extern int 		TEIInit(u_int *);
 extern void 		TEIFree(void);
 
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index 56a76a0ffdd..6fbae42127b 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -945,7 +945,7 @@ l2_tei(struct layer2 *l2, u_int cmd, u_long arg)
 }
 
 void
-release_tei(struct layer2 *l2)
+TEIrelease(struct layer2 *l2)
 {
 	struct teimgr	*tm = l2->tm;
 	u_long		flags;
-- 
cgit v1.2.3


From bfbcf034798b2ca45338cee5049b5694b7ddc865 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ZenIV.linux.org.uk>
Date: Sun, 27 Jul 2008 06:31:22 +0100
Subject: lost sysctl fix

try_attach() should walk into the matching subdirectory, not the first one...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Valdis.Kletnieks@vt.edu
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sysctl.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 911d846f050..fe471334727 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1680,43 +1680,45 @@ static __init int sysctl_init(void)
 
 core_initcall(sysctl_init);
 
-static int is_branch_in(struct ctl_table *branch, struct ctl_table *table)
+static struct ctl_table *is_branch_in(struct ctl_table *branch,
+				      struct ctl_table *table)
 {
 	struct ctl_table *p;
 	const char *s = branch->procname;
 
 	/* branch should have named subdirectory as its first element */
 	if (!s || !branch->child)
-		return 0;
+		return NULL;
 
 	/* ... and nothing else */
 	if (branch[1].procname || branch[1].ctl_name)
-		return 0;
+		return NULL;
 
 	/* table should contain subdirectory with the same name */
 	for (p = table; p->procname || p->ctl_name; p++) {
 		if (!p->child)
 			continue;
 		if (p->procname && strcmp(p->procname, s) == 0)
-			return 1;
+			return p;
 	}
-	return 0;
+	return NULL;
 }
 
 /* see if attaching q to p would be an improvement */
 static void try_attach(struct ctl_table_header *p, struct ctl_table_header *q)
 {
 	struct ctl_table *to = p->ctl_table, *by = q->ctl_table;
+	struct ctl_table *next;
 	int is_better = 0;
 	int not_in_parent = !p->attached_by;
 
-	while (is_branch_in(by, to)) {
+	while ((next = is_branch_in(by, to)) != NULL) {
 		if (by == q->attached_by)
 			is_better = 1;
 		if (to == p->attached_by)
 			not_in_parent = 1;
 		by = by->child;
-		to = to->child;
+		to = next->child;
 	}
 
 	if (is_better && not_in_parent) {
-- 
cgit v1.2.3


From eeb61f719c00c626115852bbc91189dc3011a844 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ZenIV.linux.org.uk>
Date: Sun, 27 Jul 2008 08:59:33 +0100
Subject: missing bits of net-namespace / sysctl

Piss-poor sysctl registration API strikes again, film at 11...

What we really need is _pathname_ required to be present in already
registered table, so that kernel could warn about bad order.  That's the
next target for sysctl stuff (and generally saner and more explicit
order of initialization of ipv[46] internals wouldn't hurt either).

For the time being, here are full fixups required by ..._rotable()
stuff; we make per-net sysctl sets descendents of "ro" one and make sure
that sufficient skeleton is there before we start registering per-net
sysctls.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/net/ipv6.h         |  2 ++
 include/net/route.h        |  2 --
 net/ipv4/route.c           | 11 ++++++++++-
 net/ipv4/sysctl_net_ipv4.c | 14 --------------
 net/ipv6/af_inet6.c        | 12 ++++++++++++
 net/ipv6/sysctl_net_ipv6.c | 16 ++++++++++++++++
 net/sysctl_net.c           |  4 +++-
 7 files changed, 43 insertions(+), 18 deletions(-)

diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 2d5c18514a2..113028fb8f6 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -608,6 +608,8 @@ extern struct ctl_table *ipv6_icmp_sysctl_init(struct net *net);
 extern struct ctl_table *ipv6_route_sysctl_init(struct net *net);
 extern int ipv6_sysctl_register(void);
 extern void ipv6_sysctl_unregister(void);
+extern int ipv6_static_sysctl_register(void);
+extern void ipv6_static_sysctl_unregister(void);
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/net/route.h b/include/net/route.h
index 3140cc50085..4f0d8c14736 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -204,6 +204,4 @@ static inline struct inet_peer *rt_get_peer(struct rtable *rt)
 	return rt->peer;
 }
 
-extern ctl_table ipv4_route_table[];
-
 #endif	/* _ROUTE_H */
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index a507c5e27d0..380d6474cf6 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2914,7 +2914,7 @@ static int ipv4_sysctl_rtcache_flush_strategy(ctl_table *table,
 	return 0;
 }
 
-ctl_table ipv4_route_table[] = {
+static ctl_table ipv4_route_table[] = {
 	{
 		.ctl_name	= NET_IPV4_ROUTE_GC_THRESH,
 		.procname	= "gc_thresh",
@@ -3216,6 +3216,15 @@ int __init ip_rt_init(void)
 	return rc;
 }
 
+/*
+ * We really need to sanitize the damn ipv4 init order, then all
+ * this nonsense will go away.
+ */
+void __init ip_static_sysctl_init(void)
+{
+	register_sysctl_paths(ipv4_route_path, ipv4_route_table);
+}
+
 EXPORT_SYMBOL(__ip_select_ident);
 EXPORT_SYMBOL(ip_route_input);
 EXPORT_SYMBOL(ip_route_output_key);
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index d63e9388d92..770d827f5ab 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -401,13 +401,6 @@ static struct ctl_table ipv4_table[] = {
 		.proc_handler	= &ipv4_local_port_range,
 		.strategy	= &ipv4_sysctl_local_port_range,
 	},
-	{
-		.ctl_name	= NET_IPV4_ROUTE,
-		.procname	= "route",
-		.maxlen		= 0,
-		.mode		= 0555,
-		.child		= ipv4_route_table
-	},
 #ifdef CONFIG_IP_MULTICAST
 	{
 		.ctl_name	= NET_IPV4_IGMP_MAX_MEMBERSHIPS,
@@ -882,11 +875,4 @@ static __init int sysctl_ipv4_init(void)
 	return 0;
 }
 
-/* set enough of tree skeleton to get rid of ordering problems */
-void __init ip_static_sysctl_init(void)
-{
-	static ctl_table table[1];
-	register_sysctl_paths(net_ipv4_ctl_path, table);
-}
-
 __initcall(sysctl_ipv4_init);
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index c708ca84229..95055f8c3f3 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -934,6 +934,11 @@ static int __init inet6_init(void)
 	if (err)
 		goto out_unregister_sock;
 
+#ifdef CONFIG_SYSCTL
+	err = ipv6_static_sysctl_register();
+	if (err)
+		goto static_sysctl_fail;
+#endif
 	/*
 	 *	ipngwg API draft makes clear that the correct semantics
 	 *	for TCP and UDP is to consider one TCP and UDP instance
@@ -1058,6 +1063,10 @@ ipmr_fail:
 icmp_fail:
 	unregister_pernet_subsys(&inet6_net_ops);
 register_pernet_fail:
+#ifdef CONFIG_SYSCTL
+	ipv6_static_sysctl_unregister();
+static_sysctl_fail:
+#endif
 	cleanup_ipv6_mibs();
 out_unregister_sock:
 	sock_unregister(PF_INET6);
@@ -1113,6 +1122,9 @@ static void __exit inet6_exit(void)
 	rawv6_exit();
 
 	unregister_pernet_subsys(&inet6_net_ops);
+#ifdef CONFIG_SYSCTL
+	ipv6_static_sysctl_unregister();
+#endif
 	cleanup_ipv6_mibs();
 	proto_unregister(&rawv6_prot);
 	proto_unregister(&udplitev6_prot);
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 5c99274558b..e6dfaeac6be 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -150,3 +150,19 @@ void ipv6_sysctl_unregister(void)
 	unregister_net_sysctl_table(ip6_header);
 	unregister_pernet_subsys(&ipv6_sysctl_net_ops);
 }
+
+static struct ctl_table_header *ip6_base;
+
+int ipv6_static_sysctl_register(void)
+{
+	static struct ctl_table empty[1];
+	ip6_base = register_net_sysctl_rotable(net_ipv6_ctl_path, empty);
+	if (ip6_base == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+void ipv6_static_sysctl_unregister(void)
+{
+	unregister_net_sysctl_table(ip6_base);
+}
diff --git a/net/sysctl_net.c b/net/sysctl_net.c
index cefbc367d8b..972201cd5fa 100644
--- a/net/sysctl_net.c
+++ b/net/sysctl_net.c
@@ -73,7 +73,9 @@ static struct ctl_table_root net_sysctl_ro_root = {
 
 static int sysctl_net_init(struct net *net)
 {
-	setup_sysctl_set(&net->sysctls, NULL, is_seen);
+	setup_sysctl_set(&net->sysctls,
+			 &net_sysctl_ro_root.default_set,
+			 is_seen);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 605ccb73f6a1c891a16268b3a2923208fc637958 Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Sun, 27 Jul 2008 13:39:03 +0200
Subject: tracing: remove unused variable
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Remove the following warning with CONFIG_TRACING=y:

	kernel/trace/trace.c: In function ‘s_next’:
	kernel/trace/trace.c:1186: warning: unused variable ‘last_ent’

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/trace/trace.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index fc20e09a6cb..8f3fb3db61c 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1183,7 +1183,6 @@ static void *find_next_entry_inc(struct trace_iterator *iter)
 static void *s_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	struct trace_iterator *iter = m->private;
-	void *last_ent = iter->ent;
 	int i = (int)*pos;
 	void *ent;
 
-- 
cgit v1.2.3


From 5995477ab7f3522c497c9c4a1c55373e9d655574 Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Sun, 27 Jul 2008 17:29:15 +0200
Subject: task IO accounting: improve code readability

Put all i/o statistics in struct proc_io_accounting and use inline functions to
initialize and increment statistics, removing a lot of single variable
assignments.

This also reduces the kernel size as following (with CONFIG_TASK_XACCT=y and
CONFIG_TASK_IO_ACCOUNTING=y).

    text    data     bss     dec     hex filename
   11651       0       0   11651    2d83 kernel/exit.o.before
   11619       0       0   11619    2d63 kernel/exit.o.after
   10886     132     136   11154    2b92 kernel/fork.o.before
   10758     132     136   11026    2b12 kernel/fork.o.after

 3082029  807968 4818600 8708597  84e1f5 vmlinux.o.before
 3081869  807968 4818600 8708437  84e155 vmlinux.o.after

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/base.c                         | 57 ++++++++++------------------------
 include/linux/sched.h                  | 19 ++++--------
 include/linux/task_io_accounting.h     | 27 ++++++++++++++--
 include/linux/task_io_accounting_ops.h | 56 +++++++++++++++++++++++++++------
 kernel/exit.c                          | 30 ++----------------
 kernel/fork.c                          | 15 ++-------
 kernel/tsacct.c                        | 14 ++++-----
 7 files changed, 104 insertions(+), 114 deletions(-)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index e74308bdabd..3d94906c7aa 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -53,6 +53,7 @@
 #include <linux/time.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
+#include <linux/task_io_accounting_ops.h>
 #include <linux/init.h>
 #include <linux/capability.h>
 #include <linux/file.h>
@@ -2402,44 +2403,17 @@ static int proc_base_fill_cache(struct file *filp, void *dirent,
 #ifdef CONFIG_TASK_IO_ACCOUNTING
 static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
 {
-	u64 rchar, wchar, syscr, syscw;
-	struct task_io_accounting ioac;
-
-	rchar = task->rchar;
-	wchar = task->wchar;
-	syscr = task->syscr;
-	syscw = task->syscw;
-	memcpy(&ioac, &task->ioac, sizeof(ioac));
-
-	if (whole) {
-		unsigned long flags;
-
-		if (lock_task_sighand(task, &flags)) {
-			struct signal_struct *sig = task->signal;
-			struct task_struct *t = task;
-
-			rchar += sig->rchar;
-			wchar += sig->wchar;
-			syscr += sig->syscr;
-			syscw += sig->syscw;
-
-			ioac.read_bytes += sig->ioac.read_bytes;
-			ioac.write_bytes += sig->ioac.write_bytes;
-			ioac.cancelled_write_bytes +=
-					sig->ioac.cancelled_write_bytes;
-			while_each_thread(task, t) {
-				rchar += t->rchar;
-				wchar += t->wchar;
-				syscr += t->syscr;
-				syscw += t->syscw;
-
-				ioac.read_bytes += t->ioac.read_bytes;
-				ioac.write_bytes += t->ioac.write_bytes;
-				ioac.cancelled_write_bytes +=
-					t->ioac.cancelled_write_bytes;
-			}
-			unlock_task_sighand(task, &flags);
-		}
+	struct proc_io_accounting acct = task->ioac;
+	unsigned long flags;
+
+	if (whole && lock_task_sighand(task, &flags)) {
+		struct task_struct *t = task;
+
+		task_io_accounting_add(&acct, &task->signal->ioac);
+		while_each_thread(task, t)
+			task_io_accounting_add(&acct, &t->ioac);
+
+		unlock_task_sighand(task, &flags);
 	}
 	return sprintf(buffer,
 			"rchar: %llu\n"
@@ -2449,9 +2423,10 @@ static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
 			"read_bytes: %llu\n"
 			"write_bytes: %llu\n"
 			"cancelled_write_bytes: %llu\n",
-			rchar, wchar, syscr, syscw,
-			ioac.read_bytes, ioac.write_bytes,
-			ioac.cancelled_write_bytes);
+			acct.chr.rchar, acct.chr.wchar,
+			acct.chr.syscr, acct.chr.syscw,
+			acct.blk.read_bytes, acct.blk.write_bytes,
+			acct.blk.cancelled_write_bytes);
 }
 
 static int proc_tid_io_accounting(struct task_struct *task, char *buffer)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index f59318a0099..034c1ca6b33 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -505,10 +505,7 @@ struct signal_struct {
 	unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
 	unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
 	unsigned long inblock, oublock, cinblock, coublock;
-#ifdef CONFIG_TASK_XACCT
-	u64 rchar, wchar, syscr, syscw;
-#endif
-	struct task_io_accounting ioac;
+	struct proc_io_accounting ioac;
 
 	/*
 	 * Cumulative ns of scheduled CPU time for dead threads in the
@@ -1256,11 +1253,7 @@ struct task_struct {
 
 	unsigned long ptrace_message;
 	siginfo_t *last_siginfo; /* For ptrace use.  */
-#ifdef CONFIG_TASK_XACCT
-/* i/o counters(bytes read/written, #syscalls */
-	u64 rchar, wchar, syscr, syscw;
-#endif
-	struct task_io_accounting ioac;
+	struct proc_io_accounting ioac;
 #if defined(CONFIG_TASK_XACCT)
 	u64 acct_rss_mem1;	/* accumulated rss usage */
 	u64 acct_vm_mem1;	/* accumulated virtual memory usage */
@@ -2190,22 +2183,22 @@ extern long sched_group_rt_period(struct task_group *tg);
 #ifdef CONFIG_TASK_XACCT
 static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
 {
-	tsk->rchar += amt;
+	tsk->ioac.chr.rchar += amt;
 }
 
 static inline void add_wchar(struct task_struct *tsk, ssize_t amt)
 {
-	tsk->wchar += amt;
+	tsk->ioac.chr.wchar += amt;
 }
 
 static inline void inc_syscr(struct task_struct *tsk)
 {
-	tsk->syscr++;
+	tsk->ioac.chr.syscr++;
 }
 
 static inline void inc_syscw(struct task_struct *tsk)
 {
-	tsk->syscw++;
+	tsk->ioac.chr.syscw++;
 }
 #else
 static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
diff --git a/include/linux/task_io_accounting.h b/include/linux/task_io_accounting.h
index 44d00e9ccee..165390f8b93 100644
--- a/include/linux/task_io_accounting.h
+++ b/include/linux/task_io_accounting.h
@@ -1,5 +1,5 @@
 /*
- * task_io_accounting: a structure which is used for recording a single task's
+ * proc_io_accounting: a structure which is used for recording a single task's
  * IO statistics.
  *
  * Don't include this header file directly - it is designed to be dragged in via
@@ -8,6 +8,22 @@
  * Blame akpm@osdl.org for all this.
  */
 
+#ifdef CONFIG_TASK_XACCT
+struct task_chr_io_accounting {
+	/* bytes read */
+	u64 rchar;
+	/*  bytes written */
+	u64 wchar;
+	/* # of read syscalls */
+	u64 syscr;
+	/* # of write syscalls */
+	u64 syscw;
+};
+#else /* CONFIG_TASK_XACCT */
+struct task_chr_io_accounting {
+};
+#endif /* CONFIG_TASK_XACCT */
+
 #ifdef CONFIG_TASK_IO_ACCOUNTING
 struct task_io_accounting {
 	/*
@@ -31,7 +47,12 @@ struct task_io_accounting {
 	 */
 	u64 cancelled_write_bytes;
 };
-#else
+#else /* CONFIG_TASK_IO_ACCOUNTING */
 struct task_io_accounting {
 };
-#endif
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
+
+struct proc_io_accounting {
+	struct task_chr_io_accounting chr;
+	struct task_io_accounting blk;
+};
diff --git a/include/linux/task_io_accounting_ops.h b/include/linux/task_io_accounting_ops.h
index ff46c6fad79..e6f958ebe97 100644
--- a/include/linux/task_io_accounting_ops.h
+++ b/include/linux/task_io_accounting_ops.h
@@ -9,7 +9,7 @@
 #ifdef CONFIG_TASK_IO_ACCOUNTING
 static inline void task_io_account_read(size_t bytes)
 {
-	current->ioac.read_bytes += bytes;
+	current->ioac.blk.read_bytes += bytes;
 }
 
 /*
@@ -18,12 +18,12 @@ static inline void task_io_account_read(size_t bytes)
  */
 static inline unsigned long task_io_get_inblock(const struct task_struct *p)
 {
-	return p->ioac.read_bytes >> 9;
+	return p->ioac.blk.read_bytes >> 9;
 }
 
 static inline void task_io_account_write(size_t bytes)
 {
-	current->ioac.write_bytes += bytes;
+	current->ioac.blk.write_bytes += bytes;
 }
 
 /*
@@ -32,17 +32,25 @@ static inline void task_io_account_write(size_t bytes)
  */
 static inline unsigned long task_io_get_oublock(const struct task_struct *p)
 {
-	return p->ioac.write_bytes >> 9;
+	return p->ioac.blk.write_bytes >> 9;
 }
 
 static inline void task_io_account_cancelled_write(size_t bytes)
 {
-	current->ioac.cancelled_write_bytes += bytes;
+	current->ioac.blk.cancelled_write_bytes += bytes;
 }
 
-static inline void task_io_accounting_init(struct task_struct *tsk)
+static inline void task_io_accounting_init(struct proc_io_accounting *ioac)
 {
-	memset(&tsk->ioac, 0, sizeof(tsk->ioac));
+	memset(ioac, 0, sizeof(*ioac));
+}
+
+static inline void task_blk_io_accounting_add(struct proc_io_accounting *dst,
+						struct proc_io_accounting *src)
+{
+	dst->blk.read_bytes += src->blk.read_bytes;
+	dst->blk.write_bytes += src->blk.write_bytes;
+	dst->blk.cancelled_write_bytes += src->blk.cancelled_write_bytes;
 }
 
 #else
@@ -69,9 +77,37 @@ static inline void task_io_account_cancelled_write(size_t bytes)
 {
 }
 
-static inline void task_io_accounting_init(struct task_struct *tsk)
+static inline void task_io_accounting_init(struct proc_io_accounting *ioac)
+{
+}
+
+static inline void task_blk_io_accounting_add(struct proc_io_accounting *dst,
+						struct proc_io_accounting *src)
 {
 }
 
-#endif		/* CONFIG_TASK_IO_ACCOUNTING */
-#endif		/* __TASK_IO_ACCOUNTING_OPS_INCLUDED */
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
+
+#ifdef CONFIG_TASK_XACCT
+static inline void task_chr_io_accounting_add(struct proc_io_accounting *dst,
+						struct proc_io_accounting *src)
+{
+	dst->chr.rchar += src->chr.rchar;
+	dst->chr.wchar += src->chr.wchar;
+	dst->chr.syscr += src->chr.syscr;
+	dst->chr.syscw += src->chr.syscw;
+}
+#else
+static inline void task_chr_io_accounting_add(struct proc_io_accounting *dst,
+						struct proc_io_accounting *src)
+{
+}
+#endif /* CONFIG_TASK_XACCT */
+
+static inline void task_io_accounting_add(struct proc_io_accounting *dst,
+						struct proc_io_accounting *src)
+{
+	task_chr_io_accounting_add(dst, src);
+	task_blk_io_accounting_add(dst, src);
+}
+#endif /* __TASK_IO_ACCOUNTING_OPS_INCLUDED */
diff --git a/kernel/exit.c b/kernel/exit.c
index 0caf590548a..eb4d6470d1d 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -121,18 +121,7 @@ static void __exit_signal(struct task_struct *tsk)
 		sig->nivcsw += tsk->nivcsw;
 		sig->inblock += task_io_get_inblock(tsk);
 		sig->oublock += task_io_get_oublock(tsk);
-#ifdef CONFIG_TASK_XACCT
-		sig->rchar += tsk->rchar;
-		sig->wchar += tsk->wchar;
-		sig->syscr += tsk->syscr;
-		sig->syscw += tsk->syscw;
-#endif /* CONFIG_TASK_XACCT */
-#ifdef CONFIG_TASK_IO_ACCOUNTING
-		sig->ioac.read_bytes += tsk->ioac.read_bytes;
-		sig->ioac.write_bytes += tsk->ioac.write_bytes;
-		sig->ioac.cancelled_write_bytes +=
-					tsk->ioac.cancelled_write_bytes;
-#endif /* CONFIG_TASK_IO_ACCOUNTING */
+		task_io_accounting_add(&sig->ioac, &tsk->ioac);
 		sig->sum_sched_runtime += tsk->se.sum_exec_runtime;
 		sig = NULL; /* Marker for below. */
 	}
@@ -1363,21 +1352,8 @@ static int wait_task_zombie(struct task_struct *p, int options,
 		psig->coublock +=
 			task_io_get_oublock(p) +
 			sig->oublock + sig->coublock;
-#ifdef CONFIG_TASK_XACCT
-		psig->rchar += p->rchar + sig->rchar;
-		psig->wchar += p->wchar + sig->wchar;
-		psig->syscr += p->syscr + sig->syscr;
-		psig->syscw += p->syscw + sig->syscw;
-#endif /* CONFIG_TASK_XACCT */
-#ifdef CONFIG_TASK_IO_ACCOUNTING
-		psig->ioac.read_bytes +=
-			p->ioac.read_bytes + sig->ioac.read_bytes;
-		psig->ioac.write_bytes +=
-			p->ioac.write_bytes + sig->ioac.write_bytes;
-		psig->ioac.cancelled_write_bytes +=
-				p->ioac.cancelled_write_bytes +
-				sig->ioac.cancelled_write_bytes;
-#endif /* CONFIG_TASK_IO_ACCOUNTING */
+		task_io_accounting_add(&psig->ioac, &p->ioac);
+		task_io_accounting_add(&psig->ioac, &sig->ioac);
 		spin_unlock_irq(&p->parent->sighand->siglock);
 	}
 
diff --git a/kernel/fork.c b/kernel/fork.c
index 5e050c1317c..8214ba7c8bb 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -806,12 +806,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 	sig->nvcsw = sig->nivcsw = sig->cnvcsw = sig->cnivcsw = 0;
 	sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt = 0;
 	sig->inblock = sig->oublock = sig->cinblock = sig->coublock = 0;
-#ifdef CONFIG_TASK_XACCT
-	sig->rchar = sig->wchar = sig->syscr = sig->syscw = 0;
-#endif
-#ifdef CONFIG_TASK_IO_ACCOUNTING
-	memset(&sig->ioac, 0, sizeof(sig->ioac));
-#endif
+	task_io_accounting_init(&sig->ioac);
 	sig->sum_sched_runtime = 0;
 	INIT_LIST_HEAD(&sig->cpu_timers[0]);
 	INIT_LIST_HEAD(&sig->cpu_timers[1]);
@@ -994,13 +989,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 	p->last_switch_timestamp = 0;
 #endif
 
-#ifdef CONFIG_TASK_XACCT
-	p->rchar = 0;		/* I/O counter: bytes read */
-	p->wchar = 0;		/* I/O counter: bytes written */
-	p->syscr = 0;		/* I/O counter: read syscalls */
-	p->syscw = 0;		/* I/O counter: write syscalls */
-#endif
-	task_io_accounting_init(p);
+	task_io_accounting_init(&p->ioac);
 	acct_clear_integrals(p);
 
 	p->it_virt_expires = cputime_zero;
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 3da47ccdc5e..f9cd2561689 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -94,14 +94,14 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
 		stats->hiwater_vm    = mm->hiwater_vm * PAGE_SIZE / KB;
 		mmput(mm);
 	}
-	stats->read_char	= p->rchar;
-	stats->write_char	= p->wchar;
-	stats->read_syscalls	= p->syscr;
-	stats->write_syscalls	= p->syscw;
+	stats->read_char	= p->ioac.chr.rchar;
+	stats->write_char	= p->ioac.chr.wchar;
+	stats->read_syscalls	= p->ioac.chr.syscr;
+	stats->write_syscalls	= p->ioac.chr.syscw;
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-	stats->read_bytes	= p->ioac.read_bytes;
-	stats->write_bytes	= p->ioac.write_bytes;
-	stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes;
+	stats->read_bytes	= p->ioac.blk.read_bytes;
+	stats->write_bytes	= p->ioac.blk.write_bytes;
+	stats->cancelled_write_bytes = p->ioac.blk.cancelled_write_bytes;
 #else
 	stats->read_bytes	= 0;
 	stats->write_bytes	= 0;
-- 
cgit v1.2.3


From 13ffc32eaf0b75a19bd8c3a8702faedde28853fe Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Mon, 28 Jul 2008 02:37:32 +1000
Subject: isdn: mISDN HFC PCI support depends on virt_to_bus()

On powerpc (allyesconfig build) we get this error:

drivers/isdn/hardware/mISDN/hfcpci.c:1991: error: implicit declaration of function 'virt_to_bus'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/isdn/hardware/mISDN/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index 14793480c45..9cd5f5f6228 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -7,6 +7,7 @@ config MISDN_HFCPCI
 	tristate "Support for HFC PCI cards"
 	depends on MISDN
 	depends on PCI
+	depends on VIRT_TO_BUS
 	help
 	  Enable support for cards with Cologne Chip AG's
           HFC PCI chip.
-- 
cgit v1.2.3


From 583323b9d2f624884a8c9563fb5a4d795f39ab07 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Sun, 27 Jul 2008 21:43:11 +0200
Subject: x86: fix cpu hotplug on 32bit

commit 3e9704739daf46a8ba6593d749c67b5f7cd633d2 ("x86: boot secondary
cpus through initial_code") causes the kernel to crash when a CPU is
brought online after the read only sections have been write
protected. The write to initial_code in do_boot_cpu() fails.

Move inital_code to .cpuinit.data section.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/head_32.S | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index f67e93441ca..a7010c3a377 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -456,9 +456,6 @@ is386:	movl $2,%ecx		# set MP
 1:
 #endif /* CONFIG_SMP */
 	jmp *(initial_code)
-.align 4
-ENTRY(initial_code)
-	.long i386_start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.
@@ -601,6 +598,11 @@ ignore_int:
 #endif
 	iret
 
+.section .cpuinit.data,"wa"
+.align 4
+ENTRY(initial_code)
+	.long i386_start_kernel
+
 .section .text
 /*
  * Real beginning of normal "text" segment
-- 
cgit v1.2.3


From 31c9446993f412ecb7875e30bba4bc7f216ae016 Mon Sep 17 00:00:00 2001
From: Marc Zyngier <maz@misterjones.org>
Date: Thu, 17 Jul 2008 13:21:55 +0200
Subject: nfs_remount oops when rebooting + possible fix

Jeff, Trond,

The commit

48b605f83c920d8daa50e43fc2c7f718e04c7bfa (NFS: implement option checking
when remounting NFS filesystems (resend))

generate an Oops on my platform when rebooting while its root FS on
an NFS share (NFSv3, TCP) :

Unmounting local filesystems...done.
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c3d00000
[00000000] *pgd=a3d72031, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1]
Modules linked in: cpufreq_powersave cpufreq_ondemand cpufreq_userspace cpufreq_conservative ext3 jbd sd_mod pata_pcmcia libata scsi_mod pcmcia loop firmware_class pxafb cfbcopyarea cfbimgblt cfbfillrect pxa2xx_cs pxa2xx_core pcmcia_core snd_pxa2xx_ac97 snd_ac97_codec ac97_bus snd_pxa2xx_pcm snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd isp116x_hcd soundcore rtc_sa1100 snd_page_alloc pxa25x_udc usbcore rtc_ds1307 rtc_core
CPU: 0    Not tainted  (2.6.26-03414-g33af79d-dirty #15)
PC is at nfs_remount+0x40/0x264
LR is at do_remount_sb+0x158/0x194
pc : [<c00bbf54>]    lr : [<c0076c40>]    psr: 60000013
sp : c2dd1e70  ip : c2dd1e98  fp : c2dd1e94
r10: 00000040  r9 : c3d17000  r8 : c3c3fc40
r7 : 00000000  r6 : 00000000  r5 : c3d2b200  r4 : 00000000
r3 : 00000003  r2 : 00000000  r1 : c2dd1e9c  r0 : c3c3fc00
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0000397f  Table: a3d00000  DAC: 00000015
Process mount (pid: 1462, stack limit = 0xc2dd0270)
Stack: (0xc2dd1e70 to 0xc2dd2000)
1e60:                                     00000000 c3c3fc00 00000000 00000000
1e80: c3c3fc40 c3d17000 c2dd1ebc c2dd1e98 c0076c40 c00bbf20 c01c61e4 00000001
1ea0: c2dd1ebc 00000001 c3c3fc00 c2dd1ef0 c2dd1ee4 c2dd1ec0 c008c6d8 c0076af4
1ec0: 00000021 00000040 c2dd1ef0 c3d77000 c3eaa000 00000000 c2dd1f6c c2dd1ee8
1ee0: c008d1bc c008c5f8 00000000 c2dd0000 c3c0c320 c3805b38 c002064c 0001f820
1f00: 0001f810 00000001 00000001 00000000 c2dd0000 00000000 c2dd1f34 c2dd1f28
1f20: c005ead8 c005e6f8 c2dd1f44 c2dd1f38 c005eaf8 c005ead0 c2dd1f6c c2dd1f48
1f40: c008ae3c 00000000 c3d77000 0001f810 c0ed0021 c0020ca8 c2dd0000 00000000
1f60: c2dd1fa4 c2dd1f70 c008d2d4 c008d0bc 00000000 0001f810 c2dd1f9c c3eaa000
1f80: c3d17000 00000000 00000000 be8b6aa8 be8b6ad0 00000015 00000000 c2dd1fa8
1fa0: c0020b00 c008d254 00000000 be8b6aa8 0001f810 0001f820 0001f830 c0ed0021
1fc0: 00000000 be8b6aa8 be8b6ad0 00000015 00000000 be8b6ad0 0001f810 be8b6aa8
1fe0: 0001f810 be8b6964 0000aab8 40125124 60000010 0001f810 00000000 00000000
Backtrace:
[<c00bbf14>] (nfs_remount+0x0/0x264) from [<c0076c40>] (do_remount_sb+0x158/0x194)
  r9:c3d17000 r8:c3c3fc40 r7:00000000 r6:00000000 r5:c3c3fc00
r4:00000000
[<c0076ae8>] (do_remount_sb+0x0/0x194) from [<c008c6d8>] (do_remount+0xec/0x118)
  r6:c2dd1ef0 r5:c3c3fc00 r4:00000001
[<c008c5ec>] (do_remount+0x0/0x118) from [<c008d1bc>] (do_mount+0x10c/0x198)
[<c008d0b0>] (do_mount+0x0/0x198) from [<c008d2d4>] (sys_mount+0x8c/0xd4)
[<c008d248>] (sys_mount+0x0/0xd4) from [<c0020b00>] (ret_fast_syscall+0x0/0x2c)
  r7:00000015 r6:be8b6ad0 r5:be8b6aa8 r4:00000000
Code: 0a000086 ea000006 e3530003 8a000004 (e5923000)
---[ end trace 55e1b689cf8c8a6a ]---
------------[ cut here ]------------
WARNING: at kernel/exit.c:966 do_exit+0x3c/0x628()
Modules linked in: cpufreq_powersave cpufreq_ondemand cpufreq_userspace cpufreq_conservative ext3 jbd sd_mod pata_pcmcia libata scsi_mod pcmcia loop firmware_class pxafb cfbcopyarea cfbimgblt cfbfillrect pxa2xx_cs pxa2xx_core pcmcia_core snd_pxa2xx_ac97 snd_ac97_codec ac97_bus snd_pxa2xx_pcm snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd isp116x_hcd soundcore rtc_sa1100 snd_page_alloc pxa25x_udc usbcore rtc_ds1307 rtc_core
[<c0025168>] (dump_stack+0x0/0x14) from [<c0032154>] (warn_on_slowpath+0x4c/0x68)
[<c0032108>] (warn_on_slowpath+0x0/0x68) from [<c003531c>] (do_exit+0x3c/0x628)
  r6:0000000b r5:c3c3dc80 r4:c2dd0000
[<c00352e0>] (do_exit+0x0/0x628) from [<c0025004>] (die+0x2b0/0x30c)
[<c0024d54>] (die+0x0/0x30c) from [<c00270bc>] (__do_kernel_fault+0x6c/0x80)
[<c0027050>] (__do_kernel_fault+0x0/0x80) from [<c00272e0>] (do_page_fault+0x210/0x230)
  r7:c3fa7118 r6:c3c3dc80 r5:c3d166a8 r4:00010000
[<c00270d0>] (do_page_fault+0x0/0x230) from [<c00201ec>] (do_DataAbort+0x3c/0xa0)
[<c00201b0>] (do_DataAbort+0x0/0xa0) from [<c002064c>] (__dabt_svc+0x4c/0x60)
Exception stack(0xc2dd1e28 to 0xc2dd1e70)
1e20:                   c3c3fc00 c2dd1e9c 00000000 00000003 00000000 c3d2b200
1e40: 00000000 00000000 c3c3fc40 c3d17000 00000040 c2dd1e94 c2dd1e98 c2dd1e70
1e60: c0076c40 c00bbf54 60000013 ffffffff
  r8:c3c3fc40 r7:00000000 r6:00000000 r5:c2dd1e5c r4:ffffffff
[<c00bbf14>] (nfs_remount+0x0/0x264) from [<c0076c40>] (do_remount_sb+0x158/0x194)
  r9:c3d17000 r8:c3c3fc40 r7:00000000 r6:00000000 r5:c3c3fc00
r4:00000000
[<c0076ae8>] (do_remount_sb+0x0/0x194) from [<c008c6d8>] (do_remount+0xec/0x118)
  r6:c2dd1ef0 r5:c3c3fc00 r4:00000001
[<c008c5ec>] (do_remount+0x0/0x118) from [<c008d1bc>] (do_mount+0x10c/0x198)
[<c008d0b0>] (do_mount+0x0/0x198) from [<c008d2d4>] (sys_mount+0x8c/0xd4)
[<c008d248>] (sys_mount+0x0/0xd4) from [<c0020b00>] (ret_fast_syscall+0x0/0x2c)
  r7:00000015 r6:be8b6ad0 r5:be8b6aa8 r4:00000000
---[ end trace 55e1b689cf8c8a6a ]---
/etc/rc6.d/S60umountroot: line 17:  1462 Segmentation fault      mount $MOUNT_FORCE_OPT -n -o remount,ro -t dummytype dummydev / 2> /dev/null

The new super.c:nfs_remount function doesn't check the validity of the
options/options4 pointers. Unfortunately, this seems to happend.
The obvious patch seems to check the pointers, and not to do anything if
the happend to be NULL.

Tested on an XScale PXA255 system, latest git.

Regards,

	M.

Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/super.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 1b94e3650f5..9abcd2b329f 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1718,9 +1718,9 @@ nfs_remount(struct super_block *sb, int *flags, char *raw_data)
 	 * ones were explicitly specified. Fall back to legacy behavior and
 	 * just return success.
 	 */
-	if ((nfsvers == 4 && options4->version == 1) ||
-	    (nfsvers <= 3 && options->version >= 1 &&
-	     options->version <= 6))
+	if ((nfsvers == 4 && (!options4 || options4->version == 1)) ||
+	    (nfsvers <= 3 && (!options || (options->version >= 1 &&
+					   options->version <= 6))))
 		return 0;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
-- 
cgit v1.2.3


From 744d18dbfae07482ea461701b0aaec3a75ec9224 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sun, 27 Jul 2008 18:03:19 -0400
Subject: NFS: Ensure we call nfs_sb_deactive() after releasing the directory
 inode

In order to avoid the "Busy inodes after unmount" error message, we need to
ensure that nfs_async_unlink_release() releases the super block after the
call to nfs_free_unlinkdata().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/unlink.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c
index 3adf8b26646..f089e5839d7 100644
--- a/fs/nfs/unlink.c
+++ b/fs/nfs/unlink.c
@@ -95,10 +95,11 @@ static void nfs_async_unlink_done(struct rpc_task *task, void *calldata)
 static void nfs_async_unlink_release(void *calldata)
 {
 	struct nfs_unlinkdata	*data = calldata;
+	struct super_block *sb = data->dir->i_sb;
 
 	nfs_dec_sillycount(data->dir);
-	nfs_sb_deactive(NFS_SERVER(data->dir));
 	nfs_free_unlinkdata(data);
+	nfs_sb_deactive(NFS_SB(sb));
 }
 
 static const struct rpc_call_ops nfs_unlink_ops = {
-- 
cgit v1.2.3


From 940389b8afad6495211614c13eb91ef7001773ec Mon Sep 17 00:00:00 2001
From: Andrea Righi <righi.andrea@gmail.com>
Date: Mon, 28 Jul 2008 00:48:12 +0200
Subject: task IO accounting: move all IO statistics in struct
 task_io_accounting

Simplify the code of include/linux/task_io_accounting.h.

It is also more reasonable to have all the task i/o-related statistics in a
single struct (task_io_accounting).

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/base.c                         | 10 +++----
 include/linux/sched.h                  | 12 ++++-----
 include/linux/task_io_accounting.h     | 17 ++----------
 include/linux/task_io_accounting_ops.h | 48 +++++++++++++++++-----------------
 kernel/tsacct.c                        | 14 +++++-----
 5 files changed, 44 insertions(+), 57 deletions(-)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index 3d94906c7aa..01ed610f9b8 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2403,7 +2403,7 @@ static int proc_base_fill_cache(struct file *filp, void *dirent,
 #ifdef CONFIG_TASK_IO_ACCOUNTING
 static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
 {
-	struct proc_io_accounting acct = task->ioac;
+	struct task_io_accounting acct = task->ioac;
 	unsigned long flags;
 
 	if (whole && lock_task_sighand(task, &flags)) {
@@ -2423,10 +2423,10 @@ static int do_io_accounting(struct task_struct *task, char *buffer, int whole)
 			"read_bytes: %llu\n"
 			"write_bytes: %llu\n"
 			"cancelled_write_bytes: %llu\n",
-			acct.chr.rchar, acct.chr.wchar,
-			acct.chr.syscr, acct.chr.syscw,
-			acct.blk.read_bytes, acct.blk.write_bytes,
-			acct.blk.cancelled_write_bytes);
+			acct.rchar, acct.wchar,
+			acct.syscr, acct.syscw,
+			acct.read_bytes, acct.write_bytes,
+			acct.cancelled_write_bytes);
 }
 
 static int proc_tid_io_accounting(struct task_struct *task, char *buffer)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 034c1ca6b33..5270d449ff9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -505,7 +505,7 @@ struct signal_struct {
 	unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
 	unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
 	unsigned long inblock, oublock, cinblock, coublock;
-	struct proc_io_accounting ioac;
+	struct task_io_accounting ioac;
 
 	/*
 	 * Cumulative ns of scheduled CPU time for dead threads in the
@@ -1253,7 +1253,7 @@ struct task_struct {
 
 	unsigned long ptrace_message;
 	siginfo_t *last_siginfo; /* For ptrace use.  */
-	struct proc_io_accounting ioac;
+	struct task_io_accounting ioac;
 #if defined(CONFIG_TASK_XACCT)
 	u64 acct_rss_mem1;	/* accumulated rss usage */
 	u64 acct_vm_mem1;	/* accumulated virtual memory usage */
@@ -2183,22 +2183,22 @@ extern long sched_group_rt_period(struct task_group *tg);
 #ifdef CONFIG_TASK_XACCT
 static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
 {
-	tsk->ioac.chr.rchar += amt;
+	tsk->ioac.rchar += amt;
 }
 
 static inline void add_wchar(struct task_struct *tsk, ssize_t amt)
 {
-	tsk->ioac.chr.wchar += amt;
+	tsk->ioac.wchar += amt;
 }
 
 static inline void inc_syscr(struct task_struct *tsk)
 {
-	tsk->ioac.chr.syscr++;
+	tsk->ioac.syscr++;
 }
 
 static inline void inc_syscw(struct task_struct *tsk)
 {
-	tsk->ioac.chr.syscw++;
+	tsk->ioac.syscw++;
 }
 #else
 static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
diff --git a/include/linux/task_io_accounting.h b/include/linux/task_io_accounting.h
index 165390f8b93..5e88afc9a2f 100644
--- a/include/linux/task_io_accounting.h
+++ b/include/linux/task_io_accounting.h
@@ -1,5 +1,5 @@
 /*
- * proc_io_accounting: a structure which is used for recording a single task's
+ * task_io_accounting: a structure which is used for recording a single task's
  * IO statistics.
  *
  * Don't include this header file directly - it is designed to be dragged in via
@@ -8,8 +8,8 @@
  * Blame akpm@osdl.org for all this.
  */
 
+struct task_io_accounting {
 #ifdef CONFIG_TASK_XACCT
-struct task_chr_io_accounting {
 	/* bytes read */
 	u64 rchar;
 	/*  bytes written */
@@ -18,14 +18,9 @@ struct task_chr_io_accounting {
 	u64 syscr;
 	/* # of write syscalls */
 	u64 syscw;
-};
-#else /* CONFIG_TASK_XACCT */
-struct task_chr_io_accounting {
-};
 #endif /* CONFIG_TASK_XACCT */
 
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-struct task_io_accounting {
 	/*
 	 * The number of bytes which this task has caused to be read from
 	 * storage.
@@ -46,13 +41,5 @@ struct task_io_accounting {
 	 * information loss in doing that.
 	 */
 	u64 cancelled_write_bytes;
-};
-#else /* CONFIG_TASK_IO_ACCOUNTING */
-struct task_io_accounting {
-};
 #endif /* CONFIG_TASK_IO_ACCOUNTING */
-
-struct proc_io_accounting {
-	struct task_chr_io_accounting chr;
-	struct task_io_accounting blk;
 };
diff --git a/include/linux/task_io_accounting_ops.h b/include/linux/task_io_accounting_ops.h
index e6f958ebe97..4d090f9ee60 100644
--- a/include/linux/task_io_accounting_ops.h
+++ b/include/linux/task_io_accounting_ops.h
@@ -9,7 +9,7 @@
 #ifdef CONFIG_TASK_IO_ACCOUNTING
 static inline void task_io_account_read(size_t bytes)
 {
-	current->ioac.blk.read_bytes += bytes;
+	current->ioac.read_bytes += bytes;
 }
 
 /*
@@ -18,12 +18,12 @@ static inline void task_io_account_read(size_t bytes)
  */
 static inline unsigned long task_io_get_inblock(const struct task_struct *p)
 {
-	return p->ioac.blk.read_bytes >> 9;
+	return p->ioac.read_bytes >> 9;
 }
 
 static inline void task_io_account_write(size_t bytes)
 {
-	current->ioac.blk.write_bytes += bytes;
+	current->ioac.write_bytes += bytes;
 }
 
 /*
@@ -32,25 +32,25 @@ static inline void task_io_account_write(size_t bytes)
  */
 static inline unsigned long task_io_get_oublock(const struct task_struct *p)
 {
-	return p->ioac.blk.write_bytes >> 9;
+	return p->ioac.write_bytes >> 9;
 }
 
 static inline void task_io_account_cancelled_write(size_t bytes)
 {
-	current->ioac.blk.cancelled_write_bytes += bytes;
+	current->ioac.cancelled_write_bytes += bytes;
 }
 
-static inline void task_io_accounting_init(struct proc_io_accounting *ioac)
+static inline void task_io_accounting_init(struct task_io_accounting *ioac)
 {
 	memset(ioac, 0, sizeof(*ioac));
 }
 
-static inline void task_blk_io_accounting_add(struct proc_io_accounting *dst,
-						struct proc_io_accounting *src)
+static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
 {
-	dst->blk.read_bytes += src->blk.read_bytes;
-	dst->blk.write_bytes += src->blk.write_bytes;
-	dst->blk.cancelled_write_bytes += src->blk.cancelled_write_bytes;
+	dst->read_bytes += src->read_bytes;
+	dst->write_bytes += src->write_bytes;
+	dst->cancelled_write_bytes += src->cancelled_write_bytes;
 }
 
 #else
@@ -77,35 +77,35 @@ static inline void task_io_account_cancelled_write(size_t bytes)
 {
 }
 
-static inline void task_io_accounting_init(struct proc_io_accounting *ioac)
+static inline void task_io_accounting_init(struct task_io_accounting *ioac)
 {
 }
 
-static inline void task_blk_io_accounting_add(struct proc_io_accounting *dst,
-						struct proc_io_accounting *src)
+static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
 {
 }
 
 #endif /* CONFIG_TASK_IO_ACCOUNTING */
 
 #ifdef CONFIG_TASK_XACCT
-static inline void task_chr_io_accounting_add(struct proc_io_accounting *dst,
-						struct proc_io_accounting *src)
+static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
 {
-	dst->chr.rchar += src->chr.rchar;
-	dst->chr.wchar += src->chr.wchar;
-	dst->chr.syscr += src->chr.syscr;
-	dst->chr.syscw += src->chr.syscw;
+	dst->rchar += src->rchar;
+	dst->wchar += src->wchar;
+	dst->syscr += src->syscr;
+	dst->syscw += src->syscw;
 }
 #else
-static inline void task_chr_io_accounting_add(struct proc_io_accounting *dst,
-						struct proc_io_accounting *src)
+static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
 {
 }
 #endif /* CONFIG_TASK_XACCT */
 
-static inline void task_io_accounting_add(struct proc_io_accounting *dst,
-						struct proc_io_accounting *src)
+static inline void task_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
 {
 	task_chr_io_accounting_add(dst, src);
 	task_blk_io_accounting_add(dst, src);
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index f9cd2561689..8ebcd8532df 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -94,14 +94,14 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
 		stats->hiwater_vm    = mm->hiwater_vm * PAGE_SIZE / KB;
 		mmput(mm);
 	}
-	stats->read_char	= p->ioac.chr.rchar;
-	stats->write_char	= p->ioac.chr.wchar;
-	stats->read_syscalls	= p->ioac.chr.syscr;
-	stats->write_syscalls	= p->ioac.chr.syscw;
+	stats->read_char	= p->ioac.rchar;
+	stats->write_char	= p->ioac.wchar;
+	stats->read_syscalls	= p->ioac.syscr;
+	stats->write_syscalls	= p->ioac.syscw;
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-	stats->read_bytes	= p->ioac.blk.read_bytes;
-	stats->write_bytes	= p->ioac.blk.write_bytes;
-	stats->cancelled_write_bytes = p->ioac.blk.cancelled_write_bytes;
+	stats->read_bytes	= p->ioac.read_bytes;
+	stats->write_bytes	= p->ioac.write_bytes;
+	stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes;
 #else
 	stats->read_bytes	= 0;
 	stats->write_bytes	= 0;
-- 
cgit v1.2.3